Science.gov

Sample records for 289i switching basics

  1. Basic Studies of Gases for Fast Switches.

    DTIC Science & Technology

    1985-01-01

    nanoseconds. The major technological problem to be faced when using this type of energy storage system is in the design of a repetitive opening switch. A...M. Vitkovitsky, IEEE Trans. Plasma Sci. PS-8, 176 (1980). 3. K. H. Schoenbach, G. Schaefer, E. E. Kunhardt, M. Kristiansen, L. L. Hatfield, and A. H...Kristianser. and Schoerbach. 1981). One of 󈧜 GovT @dMabje to DTIC does 6 wait tUjll legible repTOdU’O"’ L the major problems to be faced vith this

  2. The role of phenotypic switching in the basic biology and pathogenesis of Candida albicans

    PubMed Central

    Soll, David R.

    2014-01-01

    The “white-opaque” transition in Candida albicans was discovered in 1987. For the next fifteen years, a significant body of knowledge accumulated that included differences between the cell types in gene expression, cellular architecture and virulence in cutaneous and systemic mouse models. However, it was not until 2002 that we began to understand the role of switching in the life history of this pathogen, the role of the mating type locus and the molecular pathways that regulated it. Then in 2006, both the master switch locus WORI and the pheromone-induced white cell biofilm were discovered. Since that year, a number of new observations on the regulation and biology of switching have been made that have significantly increased the perceived complexity of this fascinating phenotypic transition. PMID:24455104

  3. Protonation switching to the least-basic heteroatom of carbamate through cationic hydrogen bonding promotes the formation of isocyanate cations.

    PubMed

    Kurouchi, Hiroaki; Sumita, Akinari; Otani, Yuko; Ohwada, Tomohiko

    2014-07-07

    We found that phenethylcarbamates that bear ortho-salicylate as an ether group (carbamoyl salicylates) dramatically accelerate OC bond dissociation in strong acid to facilitate generation of isocyanate cation (N-protonated isocyanates), which undergo subsequent intramolecular aromatic electrophilic cyclization to give dihydroisoquinolones. To generate isocyanate cations from carbamates in acidic media as electrophiles for aromatic substitution, protonation at the ether oxygen, the least basic heteroatom, is essential to promote CO bond cleavage. However, the carbonyl oxygen of carbamates, the most basic site, is protonated exclusively in strong acids. We found that the protonation site can be shifted to an alternative basic atom by linking methyl salicylate to the ether oxygen of carbamate. The methyl ester oxygen ortho to the phenolic (ether) oxygen of salicylate is as basic as the carbamate carbonyl oxygen, and we found that monoprotonation at the methyl ester oxygen in strong acid resulted in the formation of an intramolecular cationic hydrogen bond (>CO(+) H⋅⋅⋅O<) with the phenolic ether oxygen. This facilitates OC bond dissociation of phenethylcarbamates, thereby promoting isocyanate cation formation. In contrast, superacid-mediated diprotonation at the methyl ester oxygen of the salicylate and the carbonyl oxygen of the carbamate afforded a rather stable dication, which did not readily undergo CO bond dissociation. This is an unprecedented and unknown case in which the monocation has greater reactivity than the dication.

  4. LIP19, a basic region leucine zipper protein, is a Fos-like molecular switch in the cold signaling of rice plants.

    PubMed

    Shimizu, Hidekazu; Sato, Kazuhito; Berberich, Thomas; Miyazaki, Atsushi; Ozaki, Rei; Imai, Ryozo; Kusano, Tomonobu

    2005-10-01

    The rice low-temperature-induced lip19 gene encodes a 148-amino-acid basic region/leucine zipper (bZIP) protein, termed LIP19. In this study we characterized LIP19 and showed that it lacks the usual ability of bZIP proteins to homodimerize and to bind DNA, as does the Fos protein in mammals. Using a yeast two-hybrid system, the cDNA clones whose products interact with LIP19 were screened. This search revealed a clone termed OsOBF1 (Oryza sativa OBF1) that encodes a new bZIP protein (OsOBF1). This protein forms a homodimer and binds to the hexamer motif sequence (5'-ACGTCA-3'). The protein-protein interaction in homo- and hetero-combinations between LIP19 and OsOBF1 was confirmed in vitro and in planta. LIP19 and OsOBF1 most likely interact with each other more strongly than OsOBF1 interacts with itself, and the resulting heterodimer binds to the C/G hybrid sequence but not to the hexamer sequence. Whereas the expression patterns of lip19 and OsOBF1 in response to low temperatures were totally opposite, the locations of their expression were almost identical. Based upon the presented data, we propose a model describing the low-temperature signal switching mediated by LIP19 in rice.

  5. Regulatory switch enforced by basic helix-loop-helix and ACT-domain mediated dimerizations of the maize transcription factor R.

    PubMed

    Kong, Que; Pattanaik, Sitakanta; Feller, Antje; Werkman, Joshua R; Chai, Chenglin; Wang, Yongqin; Grotewold, Erich; Yuan, Ling

    2012-07-24

    The maize R2R3-MYB regulator C1 cooperates with the basic helix-loop-helix (bHLH) factor R to activate the expression of anthocyanin biosynthetic genes coordinately. As is the case for other bHLH factors, R harbors several protein-protein interaction domains. Here we show that not the classical but rather a briefly extended R bHLH region forms homodimers that bind canonical G-box DNA motifs. This bHLH DNA-binding activity is abolished if the C-terminal ACT (aspartokinase, chorismate, and TyrA) domain is licensed to homodimerize. Then the bHLH remains in the monomeric form, allowing it to interact with R-interacting factor 1 (RIF1). In this configuration, the R-RIF1 complex is recruited to the promoters of a subset of anthocyanin biosynthetic genes, such as A1, through the interaction with its MYB partner C1. If, however, the ACT domain remains monomeric, the bHLH region dimerizes and binds to G-boxes present in several anthocyanin genes, such as Bz1. Our results provide a mechanism by which a dimerization domain in a bHLH factor behaves as a switch that permits distinct configurations of a regulatory complex to be tethered to different promoters. Such a combinatorial gene regulatory framework provides one mechanism by which genes lacking obviously conserved cis-regulatory elements are regulated coordinately.

  6. The effects of threonine phosphorylation on the stability and dynamics of the central molecular switch region of 18.5-kDa myelin basic protein.

    PubMed

    Vassall, Kenrick A; Bessonov, Kyrylo; De Avila, Miguel; Polverini, Eugenia; Harauz, George

    2013-01-01

    The classic isoforms of myelin basic protein (MBP) are essential for the formation and maintenance of myelin in the central nervous system of higher vertebrates. The protein is involved in all facets of the development, compaction, and stabilization of the multilamellar myelin sheath, and also interacts with cytoskeletal and signaling proteins. The predominant 18.5-kDa isoform of MBP is an intrinsically-disordered protein that is a candidate auto-antigen in the human demyelinating disease multiple sclerosis. A highly-conserved central segment within classic MBP consists of a proline-rich region (murine 18.5-kDa sequence -T92-P93-R94-T95-P96-P97-P98-S99-) containing a putative SH3-ligand, adjacent to a region that forms an amphipathic α-helix (P82-I90) upon interaction with membranes, or under membrane-mimetic conditions. The T92 and T95 residues within the proline-rich region can be post-translationally modified through phosphorylation by mitogen-activated protein (MAP) kinases. Here, we have investigated the structure of the α-helical and proline-rich regions in dilute aqueous buffer, and have evaluated the effects of phosphorylation at T92 and T95 on the stability and dynamics of the α-helical region, by utilizing four 36-residue peptides (S72-S107) with differing phosphorylation status. Nuclear magnetic resonance spectroscopy reveals that both the α-helical as well as the proline-rich regions are disordered in aqueous buffer, whereas they are both structured in a lipid environment (cf., Ahmed et al., Biochemistry 51, 7475-9487, 2012). Thermodynamic analysis of trifluoroethanol-titration curves monitored by circular dichroism spectroscopy reveals that phosphorylation, especially at residue T92, impedes formation of the amphipathic α-helix. This conclusion is supported by molecular dynamics simulations, which further illustrate that phosphorylation reduces the folding reversibility of the α-helix upon temperature perturbation and affect the global structure

  7. The Effects of Threonine Phosphorylation on the Stability and Dynamics of the Central Molecular Switch Region of 18.5-kDa Myelin Basic Protein

    PubMed Central

    De Avila, Miguel; Polverini, Eugenia; Harauz, George

    2013-01-01

    The classic isoforms of myelin basic protein (MBP) are essential for the formation and maintenance of myelin in the central nervous system of higher vertebrates. The protein is involved in all facets of the development, compaction, and stabilization of the multilamellar myelin sheath, and also interacts with cytoskeletal and signaling proteins. The predominant 18.5-kDa isoform of MBP is an intrinsically-disordered protein that is a candidate auto-antigen in the human demyelinating disease multiple sclerosis. A highly-conserved central segment within classic MBP consists of a proline-rich region (murine 18.5-kDa sequence –T92-P93-R94-T95-P96-P97-P98-S99–) containing a putative SH3-ligand, adjacent to a region that forms an amphipathic α-helix (P82-I90) upon interaction with membranes, or under membrane-mimetic conditions. The T92 and T95 residues within the proline-rich region can be post-translationally modified through phosphorylation by mitogen-activated protein (MAP) kinases. Here, we have investigated the structure of the α-helical and proline-rich regions in dilute aqueous buffer, and have evaluated the effects of phosphorylation at T92 and T95 on the stability and dynamics of the α-helical region, by utilizing four 36-residue peptides (S72–S107) with differing phosphorylation status. Nuclear magnetic resonance spectroscopy reveals that both the α-helical as well as the proline-rich regions are disordered in aqueous buffer, whereas they are both structured in a lipid environment (cf., Ahmed et al., Biochemistry 51, 7475-9487, 2012). Thermodynamic analysis of trifluoroethanol-titration curves monitored by circular dichroism spectroscopy reveals that phosphorylation, especially at residue T92, impedes formation of the amphipathic α-helix. This conclusion is supported by molecular dynamics simulations, which further illustrate that phosphorylation reduces the folding reversibility of the α-helix upon temperature perturbation and affect the global

  8. Sleep State Switching

    PubMed Central

    Saper, Clifford B.; Fuller, Patrick M.; Pedersen, Nigel P.; Lu, Jun; Scammell, Thomas E.

    2010-01-01

    We take for granted the ability to fall asleep or to snap out of sleep into wakefulness, but these changes in behavioral state require specific switching mechanisms in the brain that allow well-defined state transitions. In this review, we examine the basic circuitry underlying the regulation of sleep and wakefulness, and discuss a theoretical framework wherein the interactions between reciprocal neuronal circuits enable relatively rapid and complete state transitions. We also review how homeostatic, circadian, and allostatic drives help regulate sleep state switching, and discuss how breakdown of the switching mechanism may contribute to sleep disorders such as narcolepsy. PMID:21172606

  9. Optical packet switching

    NASA Astrophysics Data System (ADS)

    Shekel, Eyal; Ruschin, Shlomo; Majer, Daniel; Levy, Jeff; Matmon, Guy; Koenigsberg, Lisa; Vecht, Jacob; Geron, Amir; Harlavan, Rotem; Shfaram, Harel; Arbel, Arnon; McDermott, Tom; Brewer, Tony

    2005-02-01

    We report here a scalable, multichassis, 6.3 terabit core router, which utilizes our proprietary optical switch. The router is commercially available and deployed in several customer sites. Our solution combines optical switching with electronic routing. An internal optical packet switching network interconnects the router"s electronic line cards, where routing and buffering functions take place electronically. The system architecture and performance will be described. The optical switch is based on Optical Phased Array (OPA) technology. It is a 64 x 64, fully non-blocking, optical crossbar switch, capable of switching in a fraction of a nanosecond. The basic principles of operation will be explained. Loss and crosstalk results will be presented, as well as the results of BER measurements of a 160 Gbps transmission through one channel. Basic principles of operation and measured results will be presented for the burst-mode-receivers, arbitration algorithm and synchronization. Finally, we will present some of our current research work on a next-generation optical switch. The technological issues we have solved in our internal optical packet network can have broad applicability to any global optical packet network.

  10. Exciter switch

    NASA Technical Reports Server (NTRS)

    Mcpeak, W. L.

    1975-01-01

    A new exciter switch assembly has been installed at the three DSN 64-m deep space stations. This assembly provides for switching Block III and Block IV exciters to either the high-power or 20-kW transmitters in either dual-carrier or single-carrier mode. In the dual-carrier mode, it provides for balancing the two drive signals from a single control panel located in the transmitter local control and remote control consoles. In addition to the improved switching capabilities, extensive monitoring of both the exciter switch assembly and Transmitter Subsystem is provided by the exciter switch monitor and display assemblies.

  11. Switch wear leveling

    DOEpatents

    Wu, Hunter; Sealy, Kylee; Gilchrist, Aaron

    2015-09-01

    An apparatus for switch wear leveling includes a switching module that controls switching for two or more pairs of switches in a switching power converter. The switching module controls switches based on a duty cycle control technique and closes and opens each switch in a switching sequence. The pairs of switches connect to a positive and negative terminal of a DC voltage source. For a first switching sequence a first switch of a pair of switches has a higher switching power loss than a second switch of the pair of switches. The apparatus includes a switch rotation module that changes the switching sequence of the two or more pairs of switches from the first switching sequence to a second switching sequence. The second switch of a pair of switches has a higher switching power loss than the first switch of the pair of switches during the second switching sequence.

  12. Projectable Basic Electronics Kit.

    ERIC Educational Resources Information Center

    H'ng, John; And Others

    1982-01-01

    Outlines advantages derived from constructing and using a Projectable Basic Electronics Kit and provides: (1) list of components; (2) diagrams of 10 finished components (resistor; capacitor; diode; switch; bulb; transistor; meter; variable capacitor; coil; connecting terminal); and (3) diode and transistor activities. (JN)

  13. Projectable Basic Electronics Kit.

    ERIC Educational Resources Information Center

    H'ng, John; And Others

    1982-01-01

    Outlines advantages derived from constructing and using a Projectable Basic Electronics Kit and provides: (1) list of components; (2) diagrams of 10 finished components (resistor; capacitor; diode; switch; bulb; transistor; meter; variable capacitor; coil; connecting terminal); and (3) diode and transistor activities. (JN)

  14. Simultaneous determination of banned acid orange dyes and basic orange dyes in foodstuffs by liquid chromatography-tandem electrospray ionization mass spectrometry via negative/positive ion switching mode.

    PubMed

    Fang, Guozhen; Wu, Yu; Dong, Xiaomeng; Liu, Cuicui; He, Shaoyuan; Wang, Shuo

    2013-04-24

    Simultaneous detection of two classes of dyes possessing different chemical properties is difficult. In this study, through negative/positive ion switching mode, simultaneous determination of four typical acid orange dyes and three typical basic orange dyes was achieved by a single high-performance liquid chromatography-tandem mass spectrometry (LC-MS/MS) method, and the analytical efficiency of multiresidues identification was greatly improved. To enhance detection sensitivity, the sample pretreatment conditions and HPLC-MS/MS determining conditions were carefully optimized. Under optimal conditions, good linearity was obtained over the range of 5-500 μg L(-1) with a correlation coefficient (R(2)) >0.9998. Limits of detection (LODs) and limits of quantification (LOQs) of the seven dyes were 0.5-3.0 and 2.0-6.0 μg kg(-1), respectively. The recoveries of the seven dyes in soybean products and marinated eggs were 74-126% with relative standard deviations (RSDs) of 2.22-25.4%, suggesting the developed method is promising for the accurate quantification of the seven dyes at trace levels in foods.

  15. Molecular DNA switches and DNA chips

    NASA Astrophysics Data System (ADS)

    Sabanayagam, Chandran R.; Berkey, Cristin; Lavi, Uri; Cantor, Charles R.; Smith, Cassandra L.

    1999-06-01

    We present an assay to detect single-nucleotide polymorphisms on a chip using molecular DNA switches and isothermal rolling- circle amplification. The basic principle behind the switch is an allele-specific oligonucleotide circularization, mediated by DNA ligase. A DNA switch is closed when perfect hybridization between the probe oligonucleotide and target DNA allows ligase to covalently circularize the probe. Mismatches around the ligation site prevent probe circularization, resulting in an open switch. DNA polymerase is then used to preferentially amplify the closed switches, via rolling-circle amplification. The stringency of the molecular switches yields 102 - 103 fold discrimination between matched and mismatched sequences.

  16. Coaxial Switch

    DTIC Science & Technology

    2014-04-23

    08-2015 Publication Coaxial Switch David J. Bamford et al Naval Undersea Warfare Center Division, Newport 1176 Howell Street, Bldg 102T, Code 00L...Distribution A A coaxial switch having a housing and a shaft extending through and rotatably mounted to the housing. The shaft extends from opposite...conductor members are electrically connected together. When the coaxial switch is engaged, the conductor members are inserted into the connector body

  17. Conformational choreography of a molecular switch region in myelin basic protein--molecular dynamics shows induced folding and secondary structure type conversion upon threonyl phosphorylation in both aqueous and membrane-associated environments.

    PubMed

    Polverini, Eugenia; Coll, Eoin P; Tieleman, D Peter; Harauz, George

    2011-03-01

    The 18.5 kDa isoform of myelin basic protein is essential to maintaining the close apposition of myelin membranes in central nervous system myelin, but its intrinsic disorder (conformational dependence on environment), a variety of post-translational modifications, and a diversity of protein ligands (e.g., actin and tubulin) all indicate it to be multifunctional. We have performed molecular dynamics simulations of a conserved central segment of 18.5 kDa myelin basic protein (residues Glu80-Gly103, murine sequence numbering) in aqueous and membrane-associated environments to ascertain the stability of constituent secondary structure elements (α-helix from Glu80-Val91 and extended poly-proline type II from Thr92-Gly103) and the effects of phosphorylation of residues Thr92 and Thr95, individually and together. In aqueous solution, all four forms of the peptide bent in the middle to form a hydrophobic cluster. The phosphorylated variants were stabilized further by electrostatic interactions and formation of β-structures, in agreement with previous spectroscopic data. In simulations performed with the peptide in association with a dimyristoylphosphatidylcholine bilayer, the amphipathic α-helical segment remained stable and membrane-associated, although the degree of penetration was less in the phosphorylated variants, and the tilt of the α-helix with respect to the plane of the membrane also changed significantly with the modifications. The extended segment adjacent to this α-helix represents a putative SH3-ligand and remained exposed to the cytoplasm (and thus accessible to binding partners). The results of these simulations demonstrate how this segment of the protein can act as a molecular switch: an amphipathic α-helical segment of the protein is membrane-associated and presents a subsequent proline-rich segment to the cytoplasm for interaction with other proteins. Phosphorylation of threonyl residues alters the degree of membrane penetration of the

  18. Basic Studies of Gases for Fast Switches.

    DTIC Science & Technology

    1983-04-01

    velocities measured as a funiction of the density-normalized electric field E/IN. Of particular promise are mixtures of Ar and C3F8 . PACS numbers: 52.80.Dy...11 1 C31 8 IF , " 61 20% C3Fs ’ !~~~~P ,10,7. . ’tO/ C3F8 . •5 \\ 02% CS Fe - " -""’. 00% A, - i3 *00 /0t, . \\: 3 .. ..- 0 ,3 2 5 )0’ 2 5 Q’ 6 2 S

  19. Basic Studies of Gases for Fast Switches

    DTIC Science & Technology

    1988-08-01

    wide E/N range (0.002 < E/N < 400 x 10- 17 V cm2 ) in the following pure gases; CF4. C2F6, C3F8 , n-C4Fo, (CF3 )20. SiF 4. BF3. Ar. CH4 and N2 . 3...32.0 30.0 0-. 28.0 26.0 -’EXPT. CALC C2H2 / C3F8 * ------- 24.0 C2H2 /C2F6 A /C 2H2/CF4 0 22,0 CH 4 /CF 4 V C2 H2 /Ar -- 20.0 1- -- I 0.0 20.0 40.0...binary gas mixtures as a function of the percentage of CH4 or C2H2 in CF4 or C2F6 or C3F8 or Ar. The symbols are the experimental values; the lines are

  20. Basic Studies of Gases for Fast Switches.

    DTIC Science & Technology

    1987-02-01

    6, C3F,, and n-C4 Fto at low E/N values. The -qr/N measurements in C3F8 and n-C4 Fo are dependent on gas pressure over a wide E IN range in agreement...attachment processes for C3F8 and n-C4 F,, have been quantified from the pressure dependence of the measured electron attachment coefficients lT/N as a...2.5 AI SBn-C 4 F1 0 b 0 ft . .... " X " ". 2.0 * /46 00S Las @0 05 o (t0 V 0miA 5/N "O -’, C3F8 EINt (z10 ’ FIG. 7. Present measurements of the

  1. Basic Studies of Gases for Fast Switches.

    DTIC Science & Technology

    1985-11-01

    measured the electron attachment and ionization coeffi- cients and electron drift velocities in 02, CH4, CF4, C2F6 , C3F8 , and n-C4Flo gases using a new...method of data analysis. The pressure depen- dence of the electron attachment coefficient in 02, C3F8 , and n-C4F10 and of the electron drift velocity...in C3F8 and n-C4F10 have been analyzed and explained. A paper describing this technique and the measurements we have performed in these gases has

  2. Optical computer switching network

    NASA Technical Reports Server (NTRS)

    Clymer, B.; Collins, S. A., Jr.

    1985-01-01

    The design for an optical switching system for minicomputers that uses an optical spatial light modulator such as a Hughes liquid crystal light valve is presented. The switching system is designed to connect 80 minicomputers coupled to the switching system by optical fibers. The system has two major parts: the connection system that connects the data lines by which the computers communicate via a two-dimensional optical matrix array and the control system that controls which computers are connected. The basic system, the matrix-based connecting system, and some of the optical components to be used are described. Finally, the details of the control system are given and illustrated with a discussion of timing.

  3. Optical Computer Switching Network

    NASA Astrophysics Data System (ADS)

    Clymer, B.; Collins, S. A., Jr.

    1985-02-01

    In this paper we present the design for an optical switching system for minicomputers that uses an optical spatial light modulator such as a Hughes liquid crystal light valve. The switching system is designed to connect 80 minicomputers coupled to the switching system by optical fibers. The system has two major parts: the connection system that connects the data lines by which the computers communicate via a two-dimensional optical matrix array and the control system that controls which computers are connected. We first present the basic system, then describe the matrix-based connecting system and review some of the optical components to be used. Finally, the details of the control system are given and illustrated with a discussion of timing.

  4. Optical computer switching network

    NASA Astrophysics Data System (ADS)

    Clymer, B.; Collins, S. A., Jr.

    1985-02-01

    The design for an optical switching system for minicomputers that uses an optical spatial light modulator such as a Hughes liquid crystal light valve is presented. The switching system is designed to connect 80 minicomputers coupled to the switching system by optical fibers. The system has two major parts: the connection system that connects the data lines by which the computers communicate via a two-dimensional optical matrix array and the control system that controls which computers are connected. The basic system, the matrix-based connecting system, and some of the optical components to be used are described. Finally, the details of the control system are given and illustrated with a discussion of timing.

  5. Optical computer switching network

    NASA Technical Reports Server (NTRS)

    Clymer, B.; Collins, S. A., Jr.

    1985-01-01

    The design for an optical switching system for minicomputers that uses an optical spatial light modulator such as a Hughes liquid crystal light valve is presented. The switching system is designed to connect 80 minicomputers coupled to the switching system by optical fibers. The system has two major parts: the connection system that connects the data lines by which the computers communicate via a two-dimensional optical matrix array and the control system that controls which computers are connected. The basic system, the matrix-based connecting system, and some of the optical components to be used are described. Finally, the details of the control system are given and illustrated with a discussion of timing.

  6. Optical switches and switching methods

    DOEpatents

    Doty, Michael

    2008-03-04

    A device and method for collecting subject responses, particularly during magnetic imaging experiments and testing using a method such as functional MRI. The device comprises a non-metallic input device which is coupled via fiber optic cables to a computer or other data collection device. One or more optical switches transmit the subject's responses. The input device keeps the subject's fingers comfortably aligned with the switches by partially immobilizing the forearm, wrist, and/or hand of the subject. Also a robust nonmetallic switch, particularly for use with the input device and methods for optical switching.

  7. A high capacity satellite switched TDMA microwave switch matrix

    NASA Technical Reports Server (NTRS)

    Cory, B. J.; Berkowitz, M.

    1981-01-01

    A description is given of the conceptual design of a high-capacity satellite switched-time division multiple access (SS-TDMA) microwave switch matrix fabricated with GaAs monolithic microwave integrated circuits (MMICs), including integration of both microwave and control logic circuits into the monolithic design. The technology required for a 30/20 GHz communications system includes an on-board SS-TDMA switch matrix. A conceptual design study that has been completed for a wideband, high-capacity (typically 100 x 100) channel switch matrix using technology anticipated for 1987 is described, noting that the study resulted in a switch matrix design concept using a coupled crossbar architecture implemented with MMIC. The design involves basic building block MMIC, permitting flexible growth and efficient wraparound redundancy to increase reliability.

  8. ION SWITCH

    DOEpatents

    Cook, B.

    1959-02-10

    An ion switch capable of transferring large magnitudes of power is described. An ion switch constructed in accordance with the invention includes a pair of spaced control electrodes disposed in a highly evacuated region for connection in a conventional circuit to control the passing of power therethrough. A controllable ionic conduction path is provided directiy between the control electrodes by a source unit to close the ion switch. Conventional power supply means are provided to trigger the source unit and control the magnitude, durations and pulse repetition rate of the aforementioned ionic conduction path.

  9. Arterial switch.

    PubMed

    Planche, C; Lacour-Gayet, F; Serraf, A

    1998-01-01

    A relatively large spectra of anatomic variations are found within the unifying features of discordant ventriculoarterial connections. Variants that lend themselves to anatomic repair by the arterial switch operation are discussed, these include transposition of the great arteries with intact ventricular septum (TGA IVS), TGA associated with a ventricular septal defect (TGA VSD), double-outlet right ventricle with subpulmonary VSD (DORV VSD), and TGA or DORV with VSD associated with coarctation. Double discordance with VSD, which is currently treated by double switch or Rastelli and atrial switch and which probably represents, in our department, the only remaining indication for atrial switch, is not discussed. Also, we exclude TGA associated with pulmonary stenosis, which is treated by Rastelli or REV operation.

  10. Magnetic switching

    NASA Astrophysics Data System (ADS)

    Kirbie, H. C.

    1989-04-01

    Magnetic switching is a pulse compression technique that uses a saturable inductor (reactor) to pass pulses of energy between two capacitors. A high degree of pulse compression can be achieved in a network when several of these simple, magnetically switched circuits are connected in series. Individual inductors are designed to saturate in cascade as a pulse moves along the network. The technique is particularly useful when a single-pulse network must be very reliable or when a multi-pulse network must operate at a high pulse repetition frequency (PRF). Today, magnetic switches trigger spark gaps, sharpen the risetimes of high energy pulses, power large lasers, and drive high PRF linear induction accelerators. This paper will describe the technique of magnetic pulse compression using simple networks and design equations. A brief review of modern magnetic materials and of their role in magnetic switch design will be presented.

  11. Acceleration switch

    DOEpatents

    Abbin, J.P. Jr.; Devaney, H.F.; Hake, L.W.

    1979-08-29

    The disclosure relates to an improved integrating acceleration switch of the type having a mass suspended within a fluid filled chamber, with the motion of the mass initially opposed by a spring and subsequently not so opposed.

  12. Acceleration switch

    DOEpatents

    Abbin, Jr., Joseph P.; Devaney, Howard F.; Hake, Lewis W.

    1982-08-17

    The disclosure relates to an improved integrating acceleration switch of the type having a mass suspended within a fluid filled chamber, with the motion of the mass initially opposed by a spring and subsequently not so opposed.

  13. Nucleosome Switches

    NASA Astrophysics Data System (ADS)

    Schwab, David J.; Bruinsma, Robijn F.; Rudnick, Joseph; Widom, Jonathan

    2008-06-01

    We present a statistical-mechanical model for the positioning of nucleosomes along genomic DNA molecules as a function of the strength of the binding potential and the chemical potential of the nucleosomes. We show that a significant section of the DNA is composed of two-level nucleosome switching regions where the nucleosome distribution undergoes a localized, first-order transition. The location of the nucleosome switches shows a strong correlation with the location of gene-regulation regions.

  14. Nucleosome switches.

    PubMed

    Schwab, David J; Bruinsma, Robijn F; Rudnick, Joseph; Widom, Jonathan

    2008-06-06

    We present a statistical-mechanical model for the positioning of nucleosomes along genomic DNA molecules as a function of the strength of the binding potential and the chemical potential of the nucleosomes. We show that a significant section of the DNA is composed of two-level nucleosome switching regions where the nucleosome distribution undergoes a localized, first-order transition. The location of the nucleosome switches shows a strong correlation with the location of gene-regulation regions.

  15. Fast packet switch architectures for broadband integrated services digital networks

    NASA Technical Reports Server (NTRS)

    Tobagi, Fouad A.

    1990-01-01

    Background information on networking and switching is provided, and the various architectures that have been considered for fast packet switches are described. The focus is solely on switches designed to be implemented electronically. A set of definitions and a brief description of the functionality required of fast packet switches are given. Three basic types of packet switches are identified: the shared-memory, shared-medium, and space-division types. Each of these is described, and examples are given.

  16. Optical switch

    DOEpatents

    Reedy, Robert P.

    1987-01-01

    An optical switching device (10) is provided whereby light from a first glass fiber (16) or a second glass fiber (14) may be selectively transmitted into a third glass fiber (18). Each glass fiber is provided with a focusing and collimating lens system (26, 28, 30). In one mode of operation, light from the first glass fiber (16) is reflected by a planar mirror (36) into the third glass fiber (18). In another mode of operation, light from the second glass fiber (14) passes directly into the third glass fiber (18). The planar mirror (36) is attached to a rotatable table (32) which is rotated to provide the optical switching.

  17. Optical switch

    DOEpatents

    Reedy, R.P.

    1987-11-10

    An optical switching device is provided whereby light from a first glass fiber or a second glass fiber may be selectively transmitted into a third glass fiber. Each glass fiber is provided with a focusing and collimating lens system. In one mode of operation, light from the first glass fiber is reflected by a planar mirror into the third glass fiber. In another mode of operation, light from the second glass fiber passes directly into the third glass fiber. The planar mirror is attached to a rotatable table which is rotated to provide the optical switching. 3 figs.

  18. Optical switch

    DOEpatents

    Reedy, R.P.

    1985-01-18

    An optical switching device is provided whereby light from a first glass fiber or a second glass fiber may be selectively transmitted into a third glass fiber. Each glass fiber is provided with a focusing and collimating lens system. In one mode of operation, light from the first glass fiber is reflected by a planar mirror into the third glass fiber. In another mode of operation, light from the second glass fiber passes directly into the third glass fiber. The planar mirror is attached to a rotatable table which is rotated to provide the optical switching.

  19. Switching Transistor

    NASA Technical Reports Server (NTRS)

    1981-01-01

    Westinghouse Electric Corporation's D60T transistors are used primarily as switching devices for controlling high power in electrical circuits. It enables reduction in the number and size of circuit components and promotes more efficient use of energy. Wide range of application from a popcorn popper to a radio frequency generator for solar cell production.

  20. Wide Bandgap Extrinsic Photoconductive Switches

    SciTech Connect

    Sullivan, James S.

    2012-01-20

    Photoconductive semiconductor switches (PCSS) have been investigated since the late 1970s. Some devices have been developed that withstand tens of kilovolts and others that switch hundreds of amperes. However, no single device has been developed that can reliably withstand both high voltage and switch high current. Yet, photoconductive switches still hold the promise of reliable high voltage and high current operation with subnanosecond risetimes. Particularly since good quality, bulk, single crystal, wide bandgap semiconductor materials have recently become available. In this chapter we will review the basic operation of PCSS devices, status of PCSS devices and properties of the wide bandgap semiconductors 4H-SiC, 6H-SiC and 2H-GaN.

  1. Switched power workshop. [Switched power electron guns

    SciTech Connect

    Palmer, R.B.

    1988-01-01

    This paper discusses the design of a switched power electron gun. Particular topics discussed are: vacuum photodiode switch; laser switched solid state diodes; gun performance; charging supply; and laser requirements. (LSP)

  2. Asthma Basics

    MedlinePlus

    ... Old Feeding Your 1- to 2-Year-Old Asthma Basics KidsHealth > For Parents > Asthma Basics Print A ... Asthma Categories en español Asma: aspectos fundamentales About Asthma Asthma is a common lung condition in kids ...

  3. Ultrafast gas switching experiments

    NASA Astrophysics Data System (ADS)

    Frost, C. A.; Martin, T. H.; Patterson, P. E.; Rinehart, L. F.; Rohwein, G. J.; Roose, L. D.; Aurand, J. F.; Buttram, M. T.

    1993-06-01

    Recent experiments which studied the physics of ultrafast gas breakdown under the extreme overvoltages which occur when a high pressure gas switch is pulse charged to hundreds of kV in 1 ns or less are described. The highly overvolted peaking gaps produce powerful electromagnetic pulses with risetimes less than 100 ps which can be used for ultrawideband radar systems, particle accelerators, laser drivers, bioelectromagnetic studies, electromagnetic effects testing, and for basic studies of gas breakdown physics. Pulses with 50 to 100 ps risetimes to peak levels of 75 to 160 kV at pulse repetition frequencies (PRF) to 1 kHz were produced and accurately measured. A unique gas switch was developed to hold off hundreds of kV with parasitic inductance less than 1 nH. An advanced diagnostic system using Fourier compensation was developed to measure single-shot risetimes below 35 ps. The complete apparatus is described and waveforms are presented. The measured data are compared with a theoretical model which predicts key features including dependence on gas species and pressure. This technology was applied to practical systems driving ultrawideband radiating antennas and bounded wave simulators. A thyristor/pulse transformer based system using a highly overvolted cable switch was developed. This pulser driving a Sandia-designed TEM cell, provides an ultra wideband impulse with less than 200 ps risetime to the test object at a PRF greater than 1 kHz at grater tha n 100 kV/m E field.

  4. Ultrafast gas switching experiments

    SciTech Connect

    Frost, C.A.; Martin, T.H.; Patterson, P.E.; Rinehart, L.F.; Rohwein, G.J.; Roose, L.D.; Aurand, J.F.; Buttram, M.T.

    1993-08-01

    We describe recent experiments which studied the physics of ultrafast gas breakdown under the extreme overvoltages which occur when a high pressure gas switch is pulse charged to hundreds of kV in 1 ns or less. The highly overvolted peaking gaps produce powerful electromagnetic pulses with risetimes < 100 ps which can be used for ultrawideband radar systems, particle accelerators, laser drivers, bioelectromagnetic studies, electromagnetic effects testing, and for basic studies of gas breakdown physics. We have produced and accurately measured pulses with 50 to 100 ps risetimes to peak levels of 75 to 160 kV at pulse repetition frequencies (PRF) to 1 kHz. A unique gas switch was developed to hold off hundreds of kV with parasitic inductance less than 1 nH. An advanced diagnostic system using Fourier compensation was developed to measure single-shot risetimes below 35 ps. The complete apparatus is described and waveforms are presented. The measured data are compared with a theoretical model which predicts key features including dependence on gas species and technology to practical systems antennas and bounded wave developed a thyristor/pulse transformer based system using a highly overvolted cable switch. This pulser driving a Sandia-designed TEM cell, provides an ultra wideband impulse with < 200 ps risetime to the test object at a PRF > Khz at > 100 kV/m E field.

  5. Ultrafast gas switching experiments

    SciTech Connect

    Frost, C.A.; Martin, T.H.; Patterson, P.E.; Rinehart, L.F.; Rohwein, G.J.; Roose, L.D.; Aurand, J.F.; Buttram, M.T.

    1996-11-01

    We describe recent experiments which studied the physics of ultrafast gas breakdown under the extreme overvoltages which occur when a high pressure gas switch is pulse charged to hundreds of kV in 1 ns or less. The highly overvolted peaking gaps produce powerful electromagnetic pulses with risetimes < 100 ps which can be used for ultrawideband radar systems, particle accelerators, laser drivers, bioelectromagnetic studies, electromagnetic effects testing, and for basic studies of gas breakdown physics. We have produced and accurately measured pulses with 50 to 100 ps risetimes to peak levels of 75 to 160 kV at pulse repetition frequencies (PRF) to I kHz. A unique gas switch was developed to hold off hundreds of kV with parasitic inductance less than I nH. An advanced diagnostic system using Fourier compensation was developed to measure single-shot risetimes below 35 ps. The complete apparatus is described and wave forms are presented. The measured data are compared with a theoretical model which predicts key features including dependence on gas species and pressure. We have applied this technology to practical systems driving ultrawideband radiating antennas and bounded wave simulators. For example, we have developed a thyristor/pulse transformer based system using a highly overvolted cable switch. This pulser driving a Sandia- designed TEM cell, provides an ultra wideband impulse with < 200 ps risetime to the test object at a PRF > 1 kHz at > 100 kV/m E field.

  6. High power solid state switches

    NASA Astrophysics Data System (ADS)

    Gundersen, Martin

    1991-11-01

    We have successfully produced an optically triggered thyristor based in Gallium Arsenide, developed a model for breakdown, and are developing two related devices, including a Gallium Arsenide based static inductor thyristor. We are getting at the basic limitations of Gallium Arsenide for these applications, and are developing models for the physical processes that will determine device limitations. The previously supported gas phase work - resulting in the back-lighted thyratron (BLT) - has actually resulted in a very changed view of how switching can be accomplished, and this is impacting the design of important machines. The BLT is being studied internationally: in Japan for laser fusion and laser isotope separation. ITT has built a BLT that has switched 30 kA at 60 kV in testing at NSWC Dahlgren and the device is being commercialized by another American company. Versions of the switch are now being tested for excimer laser and other applications. Basically, the switch, which arose from pulse power physics studies at USC, can switch more current faster (higher di/dt), with less housekeeping, and with other advantageous properties. There are a large number of other new applications, include kinetic energy weapons, pulsed microwave sources and R.F. accelerators.

  7. Sealed reed relay limit switches

    NASA Astrophysics Data System (ADS)

    Ivanov, I. P.; Svintsov, G. P.; Yefimova, M. A.; Lebedev, A. V.; Samsonov, Y. P.

    1986-01-01

    Sealed reed relay limit switches are described which overcome the inherent deficiencies traditionally present in these devices: high material, labor consumption, and difficult operation. Series VSG limit switches developed at the All-Union Scientific Research and Technological Planning Institute for Relay Engineering (Cheboksary) for use in buildings are described. The VSG1 has a single switching contact, the VSG2 a single normally open contact, and the VSG3 a single normally closed contact. The VSG1 employs type MKS-27103 sealed reed relays, while the VSG2 and VSG3 employ KEM-1 reed relays. The magnet system, which consists of magnets and a plate, and the sealed reed relay are contained in a nonmagnetic casing with a slit in it. The mathematical expression defining the geometric dimensions of the magnet system is given. The basic parameteres of all three types of switches are tabulated. The VSG series switches can be used to replace VBK and BVK switches, thus saving electricity, labor, and materials, including silver.

  8. Multistage optical system for broadcasting and switching information.

    PubMed

    Mendlovic, D; Leibner, B; Cohen, N

    1999-10-10

    Conventional switching systems connect each input channel to one output channel. Broadcasting systems permit the connection of each input channel to more than a single output. A broadcast 2 x 2 switch is presented. This switch is an extension of the standard bypass-exchange switch. It allows for the broadcasting of the inputs in addition to the conventional modes. Multistage interconnection networks can be constructed with this switch as the basic building block. Such networks will extend their capabilities, allowing for broadcasting features. Three implementations of this type are described, and experimental results for the 2 x 2 switch are also presented.

  9. BASIC Programming.

    ERIC Educational Resources Information Center

    Jennings, Carol Ann

    Designed for use by both secondary- and postsecondary-level business teachers, this curriculum guide consists of 10 units of instructional materials dealing with Beginners All-Purpose Symbol Instruction Code (BASIC) programing. Topics of the individual lessons are numbering BASIC programs and using the PRINT, END, and REM statements; system…

  10. Magnetic switching

    SciTech Connect

    Birx, D.; Cook, E.; Hawkins, S.; Poor, S.; Reginato, L.; Schmidt, J.; Smith, M.

    1983-06-01

    The paper discusses the development program in magnetic switching which was aimed at solving the rep-rate and reliability limitations of the ATA spark gaps. The end result has been a prototype physically very similar to the present Advanced Test Accelerator (ATA) pulse power unit but vastly superior in performance. This prototype, which is easily adaptable to the existing systems, has achieved a burst rep-rate of 20 kHz and an output voltage of 500 kV. A one-on-one substitution of the existing pulse power module would result in a 100 MeV accelerator. Furthermore, the high efficiency of the magnetic pulse compression stages has allowed CW operation of the prototype at one kilohertz opening up other applications for the pulse power. Performance and design details will be described.

  11. Insulin Basics

    MedlinePlus

    ... Text Size: A A A Listen En Español Insulin Basics There are different types of insulin depending ... you may be experiencing a reaction. Types of Insulin Rapid-acting insulin , begins to work about 15 ...

  12. Basic Finance

    NASA Technical Reports Server (NTRS)

    Vittek, J. F.

    1972-01-01

    A discussion of the basic measures of corporate financial strength, and the sources of the information is reported. Considered are: balance sheet, income statement, funds and cash flow, and financial ratios.

  13. The Basics

    ERIC Educational Resources Information Center

    Indrisano, Roselmina; And Others

    1976-01-01

    These articles are presented as an aide in teaching basic subjects. This issue examines reading diagnosis, food preservation, prime numbers, electromagnets, acting out in language arts, self-directed spelling activities, and resources for environmental education. (Editor/RK)

  14. The Basics

    ERIC Educational Resources Information Center

    Indrisano, Roselmina; And Others

    1976-01-01

    These articles are presented as an aide in teaching basic subjects. This issue examines reading diagnosis, food preservation, prime numbers, electromagnets, acting out in language arts, self-directed spelling activities, and resources for environmental education. (Editor/RK)

  15. Fluoridation Basics

    MedlinePlus

    ... Water Fluoridation Journal Articles for Community Water Fluoridation Water Fluoridation Basics Recommend on Facebook Tweet Share Compartir ... because of tooth decay. History of Fluoride in Water In the 1930s, scientists examined the relationship between ...

  16. Plasma Switch Development.

    DTIC Science & Technology

    1984-06-08

    switch :9 (1) the low-pressure gas switch 17 (2) the surface flashover switch ,18 (3) the thyrtron,’ŕ (4) the high pressure...spark gap, (5) the magnetic switch .’ 9 20 and (6) the ECS. The ongoing research for both the low pressure gas and surface flashover closing- switches has... investigations into optimizing gas mixtures for opening switch applications 1 ’"’"’’’a𔃻 ; and a preliminary study of the discharge stabili-

  17. Neuromorphic atomic switch networks.

    PubMed

    Avizienis, Audrius V; Sillin, Henry O; Martin-Olmos, Cristina; Shieh, Hsien Hang; Aono, Masakazu; Stieg, Adam Z; Gimzewski, James K

    2012-01-01

    Efforts to emulate the formidable information processing capabilities of the brain through neuromorphic engineering have been bolstered by recent progress in the fabrication of nonlinear, nanoscale circuit elements that exhibit synapse-like operational characteristics. However, conventional fabrication techniques are unable to efficiently generate structures with the highly complex interconnectivity found in biological neuronal networks. Here we demonstrate the physical realization of a self-assembled neuromorphic device which implements basic concepts of systems neuroscience through a hardware-based platform comprised of over a billion interconnected atomic-switch inorganic synapses embedded in a complex network of silver nanowires. Observations of network activation and passive harmonic generation demonstrate a collective response to input stimulus in agreement with recent theoretical predictions. Further, emergent behaviors unique to the complex network of atomic switches and akin to brain function are observed, namely spatially distributed memory, recurrent dynamics and the activation of feedforward subnetworks. These devices display the functional characteristics required for implementing unconventional, biologically and neurally inspired computational methodologies in a synthetic experimental system.

  18. Neuromorphic Atomic Switch Networks

    PubMed Central

    Martin-Olmos, Cristina; Shieh, Hsien Hang; Aono, Masakazu; Stieg, Adam Z.; Gimzewski, James K.

    2012-01-01

    Efforts to emulate the formidable information processing capabilities of the brain through neuromorphic engineering have been bolstered by recent progress in the fabrication of nonlinear, nanoscale circuit elements that exhibit synapse-like operational characteristics. However, conventional fabrication techniques are unable to efficiently generate structures with the highly complex interconnectivity found in biological neuronal networks. Here we demonstrate the physical realization of a self-assembled neuromorphic device which implements basic concepts of systems neuroscience through a hardware-based platform comprised of over a billion interconnected atomic-switch inorganic synapses embedded in a complex network of silver nanowires. Observations of network activation and passive harmonic generation demonstrate a collective response to input stimulus in agreement with recent theoretical predictions. Further, emergent behaviors unique to the complex network of atomic switches and akin to brain function are observed, namely spatially distributed memory, recurrent dynamics and the activation of feedforward subnetworks. These devices display the functional characteristics required for implementing unconventional, biologically and neurally inspired computational methodologies in a synthetic experimental system. PMID:22880101

  19. Switch Transcripts in Immunoglobulin Class Switching

    NASA Astrophysics Data System (ADS)

    Lorenz, Matthias; Jung, Steffen; Radbruch, Andreas

    1995-03-01

    B cells can exchange gene segments for the constant region of the immunoglobulin heavy chain, altering the class and effector function of the antibodies that they produce. Class switching is directed to distinct classes by cytokines, which induce transcription of the targeted DNA sequences. These transcripts are processed, resulting in spliced "switch" transcripts. Switch recombination can be directed to immunoglobulin G1 (IgG1) by the heterologous human metallothionein II_A promoter in mutant mice. Induction of the structurally conserved, spliced switch transcripts is sufficient to target switch recombination to IgG1, whereas transcription alone is not.

  20. Basic Science.

    ERIC Educational Resources Information Center

    Mercer County Community Coll., Trenton, NJ.

    Instructional materials are provided for a course that covers basic concepts of physics and chemistry. Designed for use in a workplace literacy project developed by Mercer County Community College (New Jersey) and its partners, the course describes applications of these concepts to real-life situations, with an emphasis on applications of…

  1. Ethanol Basics

    SciTech Connect

    2015-01-30

    Ethanol is a widely-used, domestically-produced renewable fuel made from corn and other plant materials. More than 96% of gasoline sold in the United States contains ethanol. Learn more about this alternative fuel in the Ethanol Basics Fact Sheet, produced by the U.S. Department of Energy's Clean Cities program.

  2. Basic Horticulture.

    ERIC Educational Resources Information Center

    Geer, Barbra Farabough

    This learning packet contains teaching suggestions and student learning materials for a course in basic horticulture aimed at preparing students for employment in a number of horticulture areas. The packet includes nine sections and twenty instructional units. Following the standard format established for Oklahoma vocational education materials in…

  3. Basic Skills.

    ERIC Educational Resources Information Center

    Addison-Rutland Supervisory Union, Fair Haven, VT.

    This publication lists basic skills curriculum objectives for kindergarten through eighth grade in the schools of the Addison-Rutland Supervisory Union in Fair Haven, Vermont. Objectives concern language arts, reading, mathematics, science, and social studies instruction. Kindergarten objectives for general skills, physical growth, motor skills,…

  4. Basic Education.

    ERIC Educational Resources Information Center

    Robinson, Virginia, Ed.

    1984-01-01

    This issue of "Basic Education" is devoted to the arts in education as a concern that should be addressed in a time of new priorities for the curriculum. Five articles and a book review are included. The opening article, "The State of the Arts in Education: Envisioning Active Participation By All" (Virginia Robinson),…

  5. Basic Backwardness.

    ERIC Educational Resources Information Center

    Weingartner, Charles

    This paper argues that the "back to basics" movement is regressive and that regression is the characteristic mode of fear-ridden personalities. It is argued that many people in American society today have lost their ability to laugh and do not have the sense of humor which is crucial to a healthy mental state. Such topics as necrophilia, mental…

  6. Body Basics

    MedlinePlus

    ... more about how the body works, what basic human anatomy is, and what happens when parts of the body don't function properly. Blood Bones, Muscles, and Joints Brain and Nervous System Digestive System Endocrine System Eyes Female Reproductive System ...

  7. Basic Horticulture.

    ERIC Educational Resources Information Center

    Geer, Barbra Farabough

    This learning packet contains teaching suggestions and student learning materials for a course in basic horticulture aimed at preparing students for employment in a number of horticulture areas. The packet includes nine sections and twenty instructional units. Following the standard format established for Oklahoma vocational education materials in…

  8. Latching relay switch assembly

    DOEpatents

    Duimstra, Frederick A.

    1991-01-01

    A latching relay switch assembly which includes a coil section and a switch or contact section. The coil section includes at least one permanent magnet and at least one electromagnet. The respective sections are, generally, arranged in separate locations or cavities in the assembly. The switch is latched by a permanent magnet assembly and selectively switched by an overriding electromagnetic assembly.

  9. Radiation hard vacuum switch

    DOEpatents

    Boettcher, Gordon E.

    1990-03-06

    A vacuum switch with an isolated trigger probe which is not directly connected to the switching electrodes. The vacuum switch within the plasmatron is triggered by plasma expansion initiated by the trigger probe which travels through an opening to reach the vacuum switch elements. The plasma arc created is directed by the opening to the space between the anode and cathode of the vacuum switch to cause conduction.

  10. Radiation hard vacuum switch

    DOEpatents

    Boettcher, Gordon E.

    1990-01-01

    A vacuum switch with an isolated trigger probe which is not directly connected to the switching electrodes. The vacuum switch within the plasmatron is triggered by plasma expansion initiated by the trigger probe which travels through an opening to reach the vacuum switch elements. The plasma arc created is directed by the opening to the space between the anode and cathode of the vacuum switch to cause conduction.

  11. Education: The Basics. The Basics

    ERIC Educational Resources Information Center

    Wood, Kay

    2011-01-01

    Everyone knows that education is important, we are confronted daily by discussion of it in the media and by politicians, but how much do we really know about education? "Education: The Basics" is a lively and engaging introduction to education as an academic subject, taking into account both theory and practice. Covering the schooling system, the…

  12. Temporal switching jitter in photoconductive switches

    SciTech Connect

    GAUDET,JOHN A.; SKIPPER,MICHAEL C.; ABDALLA,MICHAEL D.; AHERN,SEAN M.; MAR,ALAN; LOUBRIEL,GUILLERMO M.; ZUTAVERN,FRED J.; O'MALLEY,MARTIN W.; HELGESON,WESLEY D.; ROMERO,SAMUEL P.

    2000-04-13

    This paper reports on a recent comparison made between the Air Force Research Laboratory (AFRL) gallium arsenide, optically-triggered switch test configuration and the Sandia National Laboratories (SNL) gallium arsenide, optically-triggered switch test configuration. The purpose of these measurements was to compare the temporal switch jitter times. It is found that the optical trigger laser characteristics are dominant in determining the PCSS jitter.

  13. Latching micro optical switch

    DOEpatents

    Garcia, Ernest J; Polosky, Marc A

    2013-05-21

    An optical switch reliably maintains its on or off state even when subjected to environments where the switch is bumped or otherwise moved. In addition, the optical switch maintains its on or off state indefinitely without requiring external power. External power is used only to transition the switch from one state to the other. The optical switch is configured with a fixed optical fiber and a movable optical fiber. The movable optical fiber is guided by various actuators in conjunction with a latching mechanism that configure the switch in one position that corresponds to the on state and in another position that corresponds to the off state.

  14. High power ferrite microwave switch

    NASA Technical Reports Server (NTRS)

    Bardash, I.; Roschak, N. K.

    1975-01-01

    A high power ferrite microwave switch was developed along with associated electronic driver circuits for operation in a spaceborne high power microwave transmitter in geostationary orbit. Three units were built and tested in a space environment to demonstrate conformance to the required performance characteristics. Each unit consisted of an input magic-tee hybrid, two non-reciprocal latching ferrite phase shifters, an out short-slot 3 db quadrature coupler, a dual driver electronic circuit, and input logic interface circuitry. The basic mode of operation of the high power ferrite microwave switch is identical to that of a four-port, differential phase shift, switchable circulator. By appropriately designing the phase shifters and electronic driver circuits to operate in the flux-transfer magnetization mode, power and temperature insensitive operation was achieved. A list of the realized characteristics of the developed units is given.

  15. Heat Switches for ADRs

    NASA Technical Reports Server (NTRS)

    DiPirro, M. J.; Shirron, P. J.

    2014-01-01

    Heat switches are key elements in the cyclic operation of Adiabatic Demagnetization Refrigerators (ADRs). Several of the types of heat switches that have been used for ADRs are described in this paper. Key elements in selection and design of these switches include not only ON/OFF switching ratio, but also method of actuation, size, weight, and structural soundness. Some of the trade-off are detailed in this paper.

  16. Heat switches for ADRs

    NASA Astrophysics Data System (ADS)

    DiPirro, M. J.; Shirron, P. J.

    2014-07-01

    Heat switches are key elements in the cyclic operation of Adiabatic Demagnetization Refrigerators (ADRs). Several of the types of heat switches that have been used for ADRs are described in this paper. Key elements in selection and design of these switches include not only ON/OFF switching ratio, but also method of actuation, size, weight, and structural soundness. Some of the trade-off are detailed in this paper.

  17. Remote switch actuator

    DOEpatents

    Haas, Edwin Gerard; Beauman, Ronald; Palo, Jr., Stefan

    2013-01-29

    The invention provides a device and method for actuating electrical switches remotely. The device is removably attached to the switch and is actuated through the transfer of a user's force. The user is able to remain physically removed from the switch site obviating need for protective equipment. The device and method allow rapid, safe actuation of high-voltage or high-current carrying electrical switches or circuit breakers.

  18. Apollo Ring Optical Switch

    SciTech Connect

    Maestas, J.H.

    1987-03-01

    An optical switch was designed, built, and installed at Sandia National Laboratories in Albuquerque, New Mexico, to facilitate the integration of two Apollo computer networks into a single network. This report presents an overview of the optical switch as well as its layout, switch testing procedure and test data, and installation.

  19. Triggered plasma opening switch

    DOEpatents

    Mendel, Clifford W.

    1988-01-01

    A triggerable opening switch for a very high voltage and current pulse includes a transmission line extending from a source to a load and having an intermediate switch section including a plasma for conducting electrons between transmission line conductors and a magnetic field for breaking the plasma conduction path and magnetically insulating the electrons when it is desired to open the switch.

  20. Inflation Basics

    SciTech Connect

    Green, Dan

    2014-03-01

    inflation since metrical fluctuations, both scalar and tensor, are also produced in inflationary models. Thus, the time appears to be appropriate for a very basic and simple exposition of the inflationary model written from a particle physics perspective. Only the simplest scalar model will be explored because it is easy to understand and contains all the basic elements of the inflationary model.

  1. REMOTE CONTROLLED SWITCHING DEVICE

    DOEpatents

    Hobbs, J.C.

    1959-02-01

    An electrical switching device which can be remotely controlled and in which one or more switches may be accurately operated at predetermined times or with predetermined intervening time intervals is described. The switching device consists essentially of a deck, a post projecting from the deck at right angles thereto, cam means mounted for rotation around said posts and a switch connected to said deck and actuated by said cam means. Means is provided for rotating the cam means at a constant speed and the switching apparatus is enclosed in a sealed container with external adjusting means and electrical connection elements.

  2. On the Switching Control

    NASA Astrophysics Data System (ADS)

    Balas, Valentina E.; Balas, Marius M.

    2009-04-01

    The paper is discussing the measures able to reject the instability that may unexpectedly appear in particular conditions, in switching controllers applications. The switching controllers' effect is explained by the combined effects of the unsuitable choice of the switching moments (in the first or third quadrants of the phase trajectory of the switching error) and of the temporal aliasing that can distort the digital control systems when the sampling rate is close to the frequency of the oscillations that are produced by the commutation. The correct switching moments are located into the second and fourth quadrants of the phase trajectory of the switching error, but an active preparation of the commutation may be simply achieved by using a tracking controller, that is driving the output of open loop controller to follow the output of the close loop controller, permanently minimizing the switching error. Simulations issued from a dc driver speed controller and from an aircraft are provided.

  3. Synthetic RNA-based switches for mammalian gene expression control.

    PubMed

    Ausländer, Simon; Fussenegger, Martin

    2017-04-04

    Synthetic ribonucleic acid (RNA)-based gene switches control RNA functions in a ligand-responsive manner. Key building blocks are aptamers that specifically bind to small molecules or protein ligands. Engineering approaches often combine rational design and high-throughput screening to identify optimal connection sites or sequences. In this report, we discuss basic principles and emerging design strategies for the engineering of RNA-based gene switches in mammalian cells. Their small size compared with those of transcriptional gene switches, together with advancements in design strategies and performance, may bring RNA-based switches to the forefront of biomedical and biotechnological applications.

  4. Optoelectronic techniques for broadband switching

    NASA Astrophysics Data System (ADS)

    Su, S. F.; Jou, L.; Lenart, J.

    1988-01-01

    Optoelectronic switching employs a hybrid optical/electronic principle to perform the switching function and is applicable for either analog broadband or high-bit rate digital switching. The major advantages of optoelectronic switching include high isolation, low crosstalk, small physical size, light weight, and low power consumption. These advantages make optoelectronic switching an excellent candidate for on-board satellite switching. This paper describes a number of optoelectronic switching architectures. System components required for implementing these switching architectures are discussed. Performance of these architectures are evaluated by calculating their crosstalk, isolation, insertion loss, matrix size, drive power, throughput, and switching speed. Technologies needed for monolithic optoelectronic switching are also identified.

  5. Intelligent switches of integrated lightwave circuits with core telecommunication functions

    NASA Astrophysics Data System (ADS)

    Izhaky, Nahum; Duer, Reuven; Berns, Neil; Tal, Eran; Vinikman, Shirly; Schoenwald, Jeffrey S.; Shani, Yosi

    2001-05-01

    We present a brief overview of a promising switching technology based on Silica on Silicon thermo-optic integrated circuits. This is basically a 2D solid-state optical device capable of non-blocking switching operation. Except of its excellent performance (insertion loss<5dB, switching time<2ms...), the switch enables additional important build-in functionalities. It enables single-to- single channel switching and single-to-multiple channel multicasting/broadcasting. In addition, it has the capability of channel weighting and variable output power control (attenuation), for instance, to equalize signal levels and compensate for unbalanced different optical input powers, or to equalize unbalanced EDFA gain curve. We examine the market segments appropriate for the switch size and technology, followed by a discussion of the basic features of the technology. The discussion is focused on important requirements from the switch and the technology (e.g., insertion loss, power consumption, channel isolation, extinction ratio, switching time, and heat dissipation). The mechanical design is also considered. It must take into account integration of optical fiber, optical planar wafer, analog electronics and digital microprocessor controls, embedded software, and heating power dissipation. The Lynx Photon.8x8 switch is compared to competing technologies, in terms of typical market performance requirements.

  6. Synchronization of Asynchronous Switched Boolean Network.

    PubMed

    Zhang, Hao; Wang, Xingyuan; Lin, Xiaohui

    2015-01-01

    In this paper, the complete synchronizations for asynchronous switched Boolean network with free Boolean sequence controllers and close-loop controllers are studied. First, the basic asynchronous switched Boolean network model is provided. With the method of semi-tensor product, the Boolean dynamics is translated into linear representation. Second, necessary and sufficient conditions for ASBN synchronization with free Boolean sequence control and close-loop control are derived, respectively. Third, some illustrative examples are provided to show the efficiency of the proposed methods.

  7. Optical Plasmonic Switch based on Graphene

    NASA Astrophysics Data System (ADS)

    Moon, Kyungsun; Park, Suk-Young

    2015-03-01

    We have studied an electro-optical plasmonic waveguide, which controls the transmission of incident light by switching the coupling of the surface plasmon polariton (SPP) localized on graphene. It has been previously shown that the propagation length of the SPP localized on the copper surface can be effectively reduced by a factor of two or three by applying external bias potential. In our study, we have demonstrated that the propagation length of the SPP localized on graphene can be dramatically reduced by a factor of ten or so and the wavelength of SPP can be reduced by several hundredths of that of the incident light as well. We have also investigated the effect of scattering times of graphene and active Si layer on switching line shape. Switching occurs upon varying the carrier density of Si layer by ?n/nc ~1% in the vicinity of switching region. For a fixed bias voltage applied just below the critical value, signal laser beam shone into the metal nano-particles may increase the carrier density as such, which will induce switching. This may help develop an all-optical nano-scale plasmonic switch. This research was supported by Basic Science Research Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Education, Science and Technology (NRF-2012R1A1A2006927).

  8. Vacuum interrupters and thyratrons as opening switches

    SciTech Connect

    Honig, E.M.

    1981-01-01

    The clear advantages of inductive storage for large scale energy storage applications are creating an increasing interest in the research and development of the opening switches required. Opening switches for single-shot inductive transfers have received considerable attention and are fairly well advanced. The problem addressed by this workshop of high power opening switches for high repetition rate applications is much more severe, however, and may well require a major research and development effort. Two candidates for such an opening switch, the triggered vacuum interrupter and the magnetically quenched thyratron, are discussed. By electrically retriggering the discharge in the vacuum interrupter between pulses, the dependence on mechanical motion is eliminated. This should enable repetition rate operation at 10 to 15 kHz while still maintaining the vacuum interrupter's proven interrupting performance of tens of kiloamps at tens of kilovolts. The magnetically quenched thyratron, on the other hand, uses a cross magnetic field to raise the switch impedance by decreasing the electron mobility and driving the discharge into an arc chute wall where it is quenched. Successful interruptions of 1 kA at 15 kV and 100 A at 50 kV after conduction for 10 ..mu..s have been demonstrated by previous researchers. Work at Los Alamos is directed toward understanding the basic mechanisms involved and increasing the switch ratings, particularly the conduction time.

  9. Monolithic Microwave Switching Matrix

    NASA Technical Reports Server (NTRS)

    Fujikawa, Gene; Ch'en, Daniel R.; Petersen, Wendell C.

    1989-01-01

    Gallium arsenide integrated-circuit chip switches any of three microwave input signals to any of three output ports. Measuring 4.9 mm on side, chip contains nine field-effect transistor (FET) crosspoint switches. Housed in custom-designed package with standard connectors for easy integration into system. FET's on chip operated as passive switches and consume no static power and insignificant amounts of switching power. Chip module cascades with similar modules into large arrays handling as many as 100 inputs and 100 outputs. Applications include switching and routing vast amounts of data between computers at extremely high speed. On communications satellite, chip switches microwave signals to and from Earth stations and other satellites.

  10. Effective switching frequency multiplier inverter

    DOEpatents

    Su, Gui-Jia; Peng, Fang Z.

    2007-08-07

    A switching frequency multiplier inverter for low inductance machines that uses parallel connection of switches and each switch is independently controlled according to a pulse width modulation scheme. The effective switching frequency is multiplied by the number of switches connected in parallel while each individual switch operates within its limit of switching frequency. This technique can also be used for other power converters such as DC/DC, AC/DC converters.

  11. 26. LOOKING SOUTH AT THE MOTOR CONTROL SWITCHING PANEL FOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    26. LOOKING SOUTH AT THE MOTOR CONTROL SWITCHING PANEL FOR BASIC OXYGEN FURNACE No. 2 IN THE BOP SHOP'S MOTOR CONTROL CENTER No. 2 ON THE GROUND FLOOR OF THE FURNACE AISLE. - U.S. Steel Duquesne Works, Basic Oxygen Steelmaking Plant, Along Monongahela River, Duquesne, Allegheny County, PA

  12. Double-Bounce Switching

    DTIC Science & Technology

    1983-06-01

    module. Adjustments provided to investigate double- bounce switching are noted. limitation is at a higher level and occurs in the conventionally...To be presented at the 4th IEEE PUlsed Power Conference, June 6-8, 1983, Albuquerque, NM. DOUBLE- BOUNCE SWITCHING* George B. Frazier and Steven R...Ashby Physics International Company 2700 Merced Street San Leandro, California 94577 Abstract Double- bounce switching is a technique for

  13. Avalanche Photoconductive Switching

    DTIC Science & Technology

    1989-06-01

    held off across the switch. In our case this corresponds to 70 kV/cm and is limited by surface flashover . The pulse length is determined by the...off across the gap of the switch, which in turn appears to be limited by surface flashover . There appears to be a threshold electric field of 20-60...and understand this mode of operation. Introduction Laser activated photoconductive switching in semiconductors is a promising technology for high

  14. Thermally actuated thermionic switch

    DOEpatents

    Barrus, Donald M.; Shires, Charles D.

    1988-01-01

    A thermally actuated thermionic switch which responds to an increase of temperature by changing from a high impedance to a low impedance at a predictable temperature set point. The switch has a bistable operation mode switching only on temperature increases. The thermionic material may be a metal which is liquid at the desired operation temperature and held in matrix in a graphite block reservoir, and which changes state (ionizes, for example) so as to be electrically conductive at a desired temperature.

  15. Thermally actuated thermionic switch

    DOEpatents

    Barrus, D.M.; Shires, C.D.

    1982-09-30

    A thermally actuated thermionic switch which responds to an increase of temperature by changing from a high impedance to a low impedance at a predictable temperature set point. The switch has a bistable operation mode switching only on temperature increases. The thermionic material may be a metal which is liquid at the desired operation temperature and held in matrix in a graphite block reservoir, and which changes state (ionizes, for example) so as to be electrically conductive at a desired temperature.

  16. Solid state switch

    DOEpatents

    Merritt, Bernard T.; Dreifuerst, Gary R.

    1994-01-01

    A solid state switch, with reverse conducting thyristors, is designed to operate at 20 kV hold-off voltage, 1500 A peak, 1.0 .mu.s pulsewidth, and 4500 pps, to replace thyratrons. The solid state switch is more reliable, more economical, and more easily repaired. The switch includes a stack of circuit card assemblies, a magnetic assist and a trigger chassis. Each circuit card assembly contains a reverse conducting thyristor, a resistor capacitor network, and triggering circuitry.

  17. AC magnetohydrodynamic microfluidic switch

    SciTech Connect

    Lemoff, A V; Lee, A P

    2000-03-02

    A microfluidic switch has been demonstrated using an AC Magnetohydrodynamic (MHD) pumping mechanism in which the Lorentz force is used to pump an electrolytic solution. By integrating two AC MHD pumps into different arms of a Y-shaped fluidic circuit, flow can be switched between the two arms. This type of switch can be used to produce complex fluidic routing, which may have multiple applications in {micro}TAS.

  18. Alarm toe switch

    DOEpatents

    Ganyard, Floyd P.

    1982-01-01

    An alarm toe switch inserted within a shoe for energizing an alarm circuit n a covert manner includes an insole mounting pad into which a miniature reed switch is fixedly molded. An elongated slot perpendicular to the reed switch is formed in the bottom surface of the mounting pad. A permanent cylindrical magnet positioned in the forward portion of the slot with a diameter greater than the pad thickness causes a bump above the pad. A foam rubber block is also positioned in the slot rearwardly of the magnet and holds the magnet in normal inoperative relation. A non-magnetic support plate covers the slot and holds the magnet and foam rubber in the slot. The plate minimizes bending and frictional forces to improve movement of the magnet for reliable switch activation. The bump occupies the knuckle space beneath the big toe. When the big toe is scrunched rearwardly the magnet is moved within the slot relative to the reed switch, thus magnetically activating the switch. When toe pressure is released the foam rubber block forces the magnet back into normal inoperative position to deactivate the reed switch. The reed switch is hermetically sealed with the magnet acting through the wall so the switch assembly S is capable of reliable operation even in wet and corrosive environments.

  19. Reusable fast opening switch

    DOEpatents

    Van Devender, J.P.; Emin, D.

    1983-12-21

    A reusable fast opening switch for transferring energy, in the form of a high power pulse, from an electromagnetic storage device such as an inductor into a load. The switch is efficient, compact, fast and reusable. The switch comprises a ferromagnetic semiconductor which undergoes a fast transition between conductive and metallic states at a critical temperature and which undergoes the transition without a phase change in its crystal structure. A semiconductor such as europium rich europhous oxide, which undergoes a conductor to insulator transition when it is joule heated from its conductor state, can be used to form the switch.

  20. Reusable fast opening switch

    DOEpatents

    Van Devender, John P.; Emin, David

    1986-01-01

    A reusable fast opening switch for transferring energy, in the form of a high power pulse, from an electromagnetic storage device such as an inductor into a load. The switch is efficient, compact, fast and reusable. The switch comprises a ferromagnetic semiconductor which undergoes a fast transition between conductive and insulating states at a critical temperature and which undergoes the transition without a phase change in its crystal structure. A semiconductor such as europium rich europhous oxide, which undergoes a conductor to insulator transition when it is joule heated from its conductor state, can be used to form the switch.

  1. Platform switching and bone platform switching.

    PubMed

    Carinci, Francesco; Brunelli, Giorgio; Danza, Matteo

    2009-01-01

    Bone platform switching involves an inward bone ring in the coronal part of the implant that is in continuity with the alveolar bone crest. Bone platform switching is obtained by using a dental fixture with a reverse conical neck. A retrospective study was performed to evaluate the effectiveness of conventional vs reverse conical neck implants. In the period between May 2004 and November 2007, 86 patients (55 females and 31 males; median age, 53 years) were operated and 234 implants were inserted: 40 and 194 were conventional vs reverse conical neck implants, respectively. Kaplan-Meier algorithm and Cox regression were used to detect those variables associated with the clinical outcome. No differences in survival and success rates were detected between conventional vs reverse conical neck implants alone or in combination with any of the studied variables. Although bone platform switching leads to several advantages, no statistical difference in alveolar crest resorption is detected in comparison with reverse conical neck implants. We suppose that the proximity of the implant abutment junction to the alveolar crestal bone gives no protection against the microflora contained in the micrograph. Additional studies on larger series and a combination of platform switching and bone platform switching could lead to improved clinical outcomes.

  2. Report 1: Basic Operation of the Switched Reluctance Motor

    NASA Technical Reports Server (NTRS)

    Pillay, Pragasen

    1998-01-01

    Typically salient poles have windings forming coils wrapped around the waists (or pole cores) of each pole. This is true for the stator of the SRM but not for the rotor. The rotor has no windings, no coils, no magnets, no commutator, or slip rings it is only comprised of laminated steel sheets stamped in the shape of the pole design and mounted on a shaft. This allows for ease in manufacturing the rotor as well as reducing the rotor's inertia. There is also no electrical loss associated with the rotor since there are no windings, commutator, or slip rings.

  3. Asymmetrical Switch Costs in Children

    ERIC Educational Resources Information Center

    Ellefson, Michelle R.; Shapiron, Laura R.; Chater, Nick

    2006-01-01

    Switching between tasks produces decreases in performance as compared to repeating the same task. Asymmetrical switch costs occur when switching between two tasks of unequal difficulty. This asymmetry occurs because the cost is greater when switching to the less difficult task than when switching to the more difficult task. Various theories about…

  4. Vacuum interrupters and thyratrons as opening switches

    NASA Astrophysics Data System (ADS)

    Honig, E. M.

    High power opening switches for inductive storage for large scale energy storage applications are described. The triggered vacuum interrupter and the magnetically quenched thyratrons are discussed. By electrically retriggering the discharge in the vacuum interrupter between pulses, the dependence on mechanical motion is eliminated. This should enable repetition rate operation at 10 to 15 kHz while still maintaining the vacuum interrupter's proven interrupting performance of tens of kiloamps at tens of kilovolts. The magnetically quenched thyratron uses a cross magnetic field to raise the switch impedance by decreasing the electron mobility and driving the discharge into an arc chute wall where it is quenched. Attempts to understand the basic mechanisms involved and to increase the switch, ratings, and particularly the conduction time, are discussed.

  5. Quantum cryptography without switching.

    PubMed

    Weedbrook, Christian; Lance, Andrew M; Bowen, Warwick P; Symul, Thomas; Ralph, Timothy C; Lam, Ping Koy

    2004-10-22

    We propose a new coherent state quantum key distribution protocol that eliminates the need to randomly switch between measurement bases. This protocol provides significantly higher secret key rates with increased bandwidths than previous schemes that only make single quadrature measurements. It also offers the further advantage of simplicity compared to all previous protocols which, to date, have relied on switching.

  6. Power-Switching Circuit

    NASA Technical Reports Server (NTRS)

    Praver, Gerald A.; Theisinger, Peter C.; Genofsky, John

    1987-01-01

    Functions of circuit breakers, meters, and switches combined. Circuit that includes power field-effect transistors (PFET's) provides on/off switching, soft starting, current monitoring, current tripping, and protection against overcurrent for 30-Vdc power supply at normal load currents up to 2 A. Has no moving parts.

  7. Reflective HTS switch

    DOEpatents

    Martens, J.S.; Hietala, V.M.; Hohenwarter, G.K.G.

    1994-09-27

    A HTS (High Temperature Superconductor) switch includes a HTS conductor for providing a superconducting path for an electrical signal and an serpentine wire actuator for controllably heating a portion of the conductor sufficiently to cause that portion to have normal, and not superconducting, resistivity. Mass of the portion is reduced to decrease switching time. 6 figs.

  8. Reflective HTS switch

    SciTech Connect

    Martens, Jon S.; Hietala, Vincent M.; Hohenwarter, Gert K. G.

    1994-01-01

    A HTS switch includes a HTS conductor for providing a superconducting path for an electrical signal and an serpentine wire actuator for controllably heating a portion of the conductor sufficiently to cause that portion to have normal, and not superconducting, resistivity. Mass of the portion is reduced to decrease switching time.

  9. Manually operated coded switch

    DOEpatents

    Barnette, Jon H.

    1978-01-01

    The disclosure relates to a manually operated recodable coded switch in which a code may be inserted, tried and used to actuate a lever controlling an external device. After attempting a code, the switch's code wheels must be returned to their zero positions before another try is made.

  10. A Novel Molecular Switch

    PubMed Central

    Daber, Robert; Lewis, Mitchell

    2009-01-01

    Transcriptional regulation is a fundamental process for regulating the flux of all metabolic pathways. For the last several decades, the lac operon has served as a valuable model for studying transcription. More recently, the switch that controls the operon has also been successfully adapted to function in mammalian cells. Here we describe how, using directed evolution, we have created a novel switch that recognizes an asymmetric operator sequence. The new switch has a repressor with altered headpiece domains for operator recognition, and a redesigned dimer interface to create a heterodimeric repressor. Quite unexpectedly, the heterodimeric switch functions better than the natural system. It can repress more tightly than the naturally occurring switch of the lac operon; it is less leaky and can be induced more efficiently. Ultimately these novel repressors could be evolved to recognize eukaryotic promoters and used to regulate gene expression in mammalian systems. PMID:19540845

  11. Erected mirror optical switch

    DOEpatents

    Allen, James J.

    2005-06-07

    A microelectromechanical (MEM) optical switching apparatus is disclosed that is based on an erectable mirror which is formed on a rotatable stage using surface micromachining. An electrostatic actuator is also formed on the substrate to rotate the stage and mirror with a high angular precision. The mirror can be erected manually after fabrication of the device and used to redirect an incident light beam at an arbitrary angel and to maintain this state in the absence of any applied electrical power. A 1.times.N optical switch can be formed using a single rotatable mirror. In some embodiments of the present invention, a plurality of rotatable mirrors can be configured so that the stages and mirrors rotate in unison when driven by a single micromotor thereby forming a 2.times.2 optical switch which can be used to switch a pair of incident light beams, or as a building block to form a higher-order optical switch.

  12. [Measurement of arterial O 2 pressure with and without O 2 inhalation after lung damage by smoke. Bioenergetic switch of the microcirculation in the whole body with various effects on the lung and moreover in the tissue. Decrease of venous mixed pO 2 as further basic effect of the O 2 multistep regeneration process].

    PubMed

    von Ardenne, M

    1982-01-01

    During an (involuntary) self-test with pulmonary impairment by smoke exposure the following physiological basic principles were disclosed in the blood capillary system (and lung alveoli): 1. The normal arterial response of the lung to pO2 changes can be paralysed by severe smoke exposure to such an extent that the Oxygen Multistep Regeneration Process is not or hardly able to elevate the arterial pO2 resting level above the age-matched expected value. As a cause of this failure a very large volume of functionally shunted blood of 15-20% was detected using a method according to Thews. Very intensive and long-lasting exercise training acts as an antidote. 2. Severe stress influences lead to such changes in the tissue capillary system that the oxygen utilization deteriorates markedly and, hence, both the peripheral (pO2-ven) and mixed venous pO2-ven increase noticeably, followed by a surprisingly diminished oxygen transport to tissue (see eta nomogram). 3. Both the peripheral venous pO2-ven and the mixed venous pO2-ven are permanently decreased by the Oxygen Multistep Regeneration Process. It follows that by this process the utilization eta of oxygen-binding capacity of blood is much more improved than hitherto supposed (see measurement given in the text: decrease of pO2-ven from 40 mm Hg (5.3 kPa) to 27 mm Hg (3.6 kPa). This corresponds to an increase of eta from 20 to 44% [!] ). Considering these recent findings, it is inadmissible to conclude only from the lack of permanently increased arterial pO2 to the failure of the Oxygen Multistep Regeneration Process. According to our suggestions these three basic principles are jointly founded on an bioenergetic switch (or trigger) mechanism of microcirculation exerting different influences on the lung (change of arterial pO2) and on the peripheral tissue (change of pO2-ven). The trigger mechanism mentioned above is discussed in more detail in this paper. In case of pulmonary impairment by smoke exposure appropriate

  13. Hydrogen masers with cavity frequency switching servos

    NASA Technical Reports Server (NTRS)

    Peters, Harry E.; Owings, H. B.; Koppang, Paul A.

    1990-01-01

    The stability of the free-running hydrogen maser is limited by pulling of the unperturbed hydrogen transition frequency due to instability of the cavity resonance frequency. While automatic spin-exchange tuning is in principle the more basic and accurate method, the required beam intensity switching and the long servo time constant result in reduced stability for measuring intervals up to 10(exp 6) seconds. More importantly, the spin-exchange tuning method requires a second stable frequency source as a reference, ideally a second hydrogen maser, to get the best results. The cavity frequency switching servo, on the other hand, has very little effect on the maser short term stability, and is fast enough to correct for cavity drift while maintaining the cavity at the spin-exchange tuned offset required to minimize instability due to beam intensity fluctuations. Not only does the cavity frequency switching servo not require a second stable frequency source, but the frequency reference is the atomic hydrogen radiated beam signal, so that no extra RF connections need be made to the cavity, and externally generated signals that would perturb the hydrogen atom need not be transmitted through the cavity. The operation of the cavity frequency switching stabilization method is discussed and the transient response of the servo and certain other aspects of the technique that have potential for achieving improved basic accuracy are illustrated.

  14. Optical Circuit Switched Protocol

    NASA Technical Reports Server (NTRS)

    Monacos, Steve P. (Inventor)

    2000-01-01

    The present invention is a system and method embodied in an optical circuit switched protocol for the transmission of data through a network. The optical circuit switched protocol is an all-optical circuit switched network and includes novel optical switching nodes for transmitting optical data packets within a network. Each optical switching node comprises a detector for receiving the header, header detection logic for translating the header into routing information and eliminating the header, and a controller for receiving the routing information and configuring an all optical path within the node. The all optical path located within the node is solely an optical path without having electronic storage of the data and without having optical delay of the data. Since electronic storage of the header is not necessary and the initial header is eliminated by the first detector of the first switching node. multiple identical headers are sent throughout the network so that subsequent switching nodes can receive and read the header for setting up an optical data path.

  15. Binary switching in a ‘symmetric' potential landscape

    PubMed Central

    Roy, Kuntal; Bandyopadhyay, Supriyo; Atulasimha, Jayasimha

    2013-01-01

    A binary switch is the basic building block for information processing. The potential energy profile of a bistable binary switch is a ‘symmetric' double well. The traditional method of switching it from one state (one well) to the other is to tilt the profile towards the desired state. Here, we present a case, where no such tilting is necessary to switch successfully, even in the presence of thermal noise. This happens because of the built-in dynamics inside the switch itself. It differs from the general perception on binary switching that in a ‘symmetric' potential landscape, the switching probability is 50% in the presence of thermal noise. Our results, considering the complete three-dimensional potential landscape, demonstrate intriguing phenomena on binary switching mechanism. With experimentally feasible parameters, we theoretically demonstrate such intriguing possibility in electric field induced magnetization switching of a shape-anisotropic single-domain magnetostrictive nanomagnet with two stable states at room-temperature. PMID:24154561

  16. Optical cross-connect circuit using hitless wavelength selective switch.

    PubMed

    Goebuchi, Yuta; Hisada, Masahiko; Kato, Tomoyuki; Kokubun, Yasuo

    2008-01-21

    We have proposed and demonstrated the basic elements of a full matrix optical switching circuit (cross-connect circuit) using a hitless wavelength selective switch (WSS). The cross-connect circuits are made of a multi-wavelength channel selective switch consisting of cascaded hitless WSSs, and a multi-port switch. These switching elements are realized through the individual Thermo-Optic (TO) tuning of a series-coupled microring resonator, and can switch arbitrary wavelength channels without blocking other wavelength channels during tuning. We demonstrate a four wavelength selective switch using a parallel topology of double series coupled microring resonators and a three wavelength selective switch using a parallel topology of quadruple series coupled microring resonators. Since the spectrum shape of quadruple series coupled microring is much more box-like than the double series, a high extinction ratio of 39.0-46.6 dB and low switching cross talk of 19.3-24.5 dB were achieved.

  17. Electromechanical magnetization switching

    SciTech Connect

    Chudnovsky, Eugene M.; Jaafar, Reem

    2015-03-14

    We show that the magnetization of a torsional oscillator that, in addition to the magnetic moment also possesses an electrical polarization, can be switched by the electric field that ignites mechanical oscillations at the frequency comparable to the frequency of the ferromagnetic resonance. The 180° switching arises from the spin-rotation coupling and is not prohibited by the different symmetry of the magnetic moment and the electric field as in the case of a stationary magnet. Analytical equations describing the system have been derived and investigated numerically. Phase diagrams showing the range of parameters required for the switching have been obtained.

  18. Photoconductive switch package

    DOEpatents

    Ca[rasp, George J

    2013-10-22

    A photoconductive switch is formed of a substrate that has a central portion of SiC or other photoconductive material and an outer portion of cvd-diamond or other suitable material surrounding the central portion. Conducting electrodes are formed on opposed sides of the substrate, with the electrodes extending beyond the central portion and the edges of the electrodes lying over the outer portion. Thus any high electric fields produced at the edges of the electrodes lie outside of and do not affect the central portion, which is the active switching element. Light is transmitted through the outer portion to the central portion to actuate the switch.

  19. SPARK GAP SWITCH

    DOEpatents

    Neal, R.B.

    1957-12-17

    An improved triggered spark gap switch is described, capable of precisely controllable firing time while switching very large amounts of power. The invention in general comprises three electrodes adjustably spaced and adapted to have a large potential impressed between the outer electrodes. The central electrode includes two separate elements electrically connected togetaer and spaced apart to define a pair of spark gaps between the end electrodes. Means are provided to cause the gas flow in the switch to pass towards the central electrode, through a passage in each separate element, and out an exit disposed between the two separate central electrode elements in order to withdraw ions from the spark gap.

  20. Photoconductive switch package

    DOEpatents

    Caporaso, George J.

    2015-10-27

    A photoconductive switch is formed of a substrate that has a central portion of SiC or other photoconductive material and an outer portion of cvd-diamond or other suitable material surrounding the central portion. Conducting electrodes are formed on opposed sides of the substrate, with the electrodes extending beyond the central portion and the edges of the electrodes lying over the outer portion. Thus any high electric fields produced at the edges of the electrodes lie outside of and do not affect the central portion, which is the active switching element. Light is transmitted through the outer portion to the central portion to actuate the switch.

  1. Solid state switch

    DOEpatents

    Merritt, B.T.; Dreifuerst, G.R.

    1994-07-19

    A solid state switch, with reverse conducting thyristors, is designed to operate at 20 kV hold-off voltage, 1,500 A peak, 1.0 [mu]s pulsewidth, and 4,500 pps, to replace thyratrons. The solid state switch is more reliable, more economical, and more easily repaired. The switch includes a stack of circuit card assemblies, a magnetic assist and a trigger chassis. Each circuit card assembly contains a reverse conducting thyristor, a resistor capacitor network, and triggering circuitry. 6 figs.

  2. Thermoelectric Seebeck effect in oxide-based resistive switching memory.

    PubMed

    Wang, Ming; Bi, Chong; Li, Ling; Long, Shibing; Liu, Qi; Lv, Hangbing; Lu, Nianduan; Sun, Pengxiao; Liu, Ming

    2014-08-20

    Reversible resistive switching induced by an electric field in oxide-based resistive switching memory shows a promising application in future information storage and processing. It is believed that there are some local conductive filaments formed and ruptured in the resistive switching process. However, as a fundamental question, how electron transports in the formed conductive filament is still under debate due to the difficulty to directly characterize its physical and electrical properties. Here we investigate the intrinsic electronic transport mechanism in such conductive filament by measuring thermoelectric Seebeck effects. We show that the small-polaron hopping model can well describe the electronic transport process for all resistance states, although the corresponding temperature-dependent resistance behaviours are contrary. Moreover, at low resistance states, we observe a clear semiconductor-metal transition around 150 K. These results provide insight in understanding resistive switching process and establish a basic framework for modelling resistive switching behaviour.

  3. Thermoelectric Seebeck effect in oxide-based resistive switching memory

    PubMed Central

    Wang, Ming; Bi, Chong; Li, Ling; Long, Shibing; Liu, Qi; Lv, Hangbing; Lu, Nianduan; Sun, Pengxiao; Liu, Ming

    2014-01-01

    Reversible resistive switching induced by an electric field in oxide-based resistive switching memory shows a promising application in future information storage and processing. It is believed that there are some local conductive filaments formed and ruptured in the resistive switching process. However, as a fundamental question, how electron transports in the formed conductive filament is still under debate due to the difficulty to directly characterize its physical and electrical properties. Here we investigate the intrinsic electronic transport mechanism in such conductive filament by measuring thermoelectric Seebeck effects. We show that the small-polaron hopping model can well describe the electronic transport process for all resistance states, although the corresponding temperature-dependent resistance behaviours are contrary. Moreover, at low resistance states, we observe a clear semiconductor–metal transition around 150 K. These results provide insight in understanding resistive switching process and establish a basic framework for modelling resistive switching behaviour. PMID:25141267

  4. Solar array switching unit

    NASA Technical Reports Server (NTRS)

    Craig, Jr., Calvin L. (Inventor)

    2000-01-01

    A solar array switching (SASU) unit (22) according to the present invention includes a control system (24), a solar cell array (26) and switch circuits (28). The SASU unit (22) is associated with a power card (30) for receiving an output from the array (26). The array (26) has a number (0.5Y) of rows (38) each of which includes a pair of cell strings (42) separated by one of the switch circuits (28). Each of the strings (42) includes a number (X) of cells in electrical series. The SASU (22) switches the array (26) between a short string configuration where the array (26) effectively includes Y strings of X length, and a long string configuration where the array (26) effectively includes 0.5Y strings of 2X length. The SASU (22) thereby facilitates the use of solar power for space missions where solar intensity, operating temperature or other factors vary significantly.

  5. Plasmonic enhanced ultrafast switch.

    SciTech Connect

    Subramania,Ganapathi Subramanian; Reno, John Louis; Passmore, Brandon Scott; Harris, Tom.; Shaner, Eric Arthur; Barrick, Todd A.

    2009-09-01

    Ultrafast electronic switches fabricated from defective material have been used for several decades in order to produce picosecond electrical transients and TeraHertz radiation. Due to the ultrashort recombination time in the photoconductor materials used, these switches are inefficient and are ultimately limited by the amount of optical power that can be applied to the switch before self-destruction. The goal of this work is to create ultrafast (sub-picosecond response) photoconductive switches on GaAs that are enhanced through plasmonic coupling structures. Here, the plasmonic coupler primarily plays the role of being a radiation condenser which will cause carriers to be generated adjacent to metallic electrodes where they can more efficiently be collected.

  6. An optical switch

    DOEpatents

    Christophorou, L.G.; Hunter, S.R.

    1987-04-30

    The invention is a gas mixture for a diffuse discharge switch having an electron attaching gas wherein electron attachment is brought about by indirect excitation of molecules to long live states by exposure to laser light. 3 figs.

  7. Switching and stopping antidepressants

    PubMed Central

    Keks, Nicholas; Hope, Judy; Keogh, Simone

    2016-01-01

    SUMMARY Switching from one antidepressant to another is frequently indicated due to an inadequate treatment response or unacceptable adverse effects. All antidepressant switches must be carried out cautiously and under close observation. Conservative switching strategies involve gradually tapering the first antidepressant followed by an adequate washout period before the new antidepressant is started. This can take a long time and include periods of no treatment with the risk of potentially life-threatening exacerbations of illness. Clinical expertise is needed for more rapid or cross-taper switching as drug toxicity, including serotonin syndrome, may result from inappropriate co-administration of antidepressants. Some antidepressants must not be combined. Antidepressants can cause withdrawal syndromes if discontinued abruptly after prolonged use. Relapse and exacerbation of depression can also occur. Gradual dose reduction over days to weeks reduces the risk and severity of complications. PMID:27346915

  8. Optical fiber crossbar switch

    NASA Astrophysics Data System (ADS)

    Kilcoyne, Michael K.; Beccue, Stephen M.; Brar, Berinder; Robinson, G.; Pedrotti, Kenneth D.; Haber, William A.

    1990-07-01

    Advances in high performance computers and signal processing systems have led to parallel system architectures. The main limitation in achieving the performance expected of these parallel systems has been the realization of an efficient means to interconnect many processors into a effective parallel system. Electronic interconnections have proved cumbersome, costly and ineffective. The Optical Fiber Crossbar Switch (OFCS) is a compact low power, multi-gigahertz bandwidth multi-channel switch which can be used in large scale computer and telecommunication applications. The switch operates in the optical domain using GaAs semiconductor lasers to transmit wideband multiple channel optical data over fiber optic cables. Recently, a 32 X 32 crossbar switching system was completed and demonstrated. Error free performance was obtained at a data bandwidth of 410 MBPS, using a silicon switch IC. The switch can be completely reconfigured in less than 50 nanoseconds under computer control. The fully populated OFCS has the capability to handle 12.8 gigabits per second (GBPS) of data while switching this data over 32 channels without the loss of a single bit during switching. GaAs IC technology has now progressed to the point that 16 X 16 GaAs based crossbar switch Ics are available which have increased the data bandwidth capability to 2.4 GBPS. The present optical interfaces are integrated GaAs transmitter drivers, GaAs lasers, and integrated GaAs optical receivers with data bandwidths exceeding 2.4 GBPS. A system using all Ill-V switching and optoelectronic components is presently under development for both NASA and DoD programs. The overall system is designed to operate at 1.3 GBPS. It is expected that these systems will find wide application in high capacity computing systems based on parallel microprocessor architecture which require high data bandwidth communication between processors. The OFCS will also have application in commercial optical telecommunication systems

  9. Lossless photonic switched networks for metro-access

    NASA Astrophysics Data System (ADS)

    Martins, Yara; Rudge Barbosa, F.; Bertoldi, Indaya; Moschim, E.

    2016-02-01

    We evaluate through computer simulation the performance of Photonic switching OPS/OBS networks of various sizes and configurations, based on a lossless (amplified) photonic switching node experimentally demonstrated previously. The great advantage of photonic switching is transparency to signal rate and format. Thus we propose a basic flexible network, with low-energy consumption and high-efficiency. In simulations traffic load is varied and network parameters such as, average number of hops (ANH), network latency (delay) and packet loss fraction are evaluated. Consistent results for the various configurations are presented, analyzed and discussed; and Interesting conclusions emerge.

  10. Cygnus PFL Switch Jitter

    SciTech Connect

    C. Mitton, G. Corrow, M. Hansen, D. Henderson, et al.

    2007-07-21

    The Cygnus Dual Beam Radiographic Facility consists of two identical radiographic sources: Cygnus 1 and Cygnus 2. Each source has the following X-ray output: 1-mm diameter spot size, 4 rads at 1 m, 50-ns full-widthhalf-maximum. The diode pulse has the following electrical specifications: 2.25 MV, 60 kA, 60 ns. This Radiographic Facility is located in an underground tunnel test area at the Nevada Test Site (NTS). The sources were developed to produce high-resolution images on subcritical tests performed at NTS. Subcritical tests are single-shot, high-value events. For this application, it is desirable to maintain a high level of reproducibility in source output. The major components of the Cygnus machines are Marx generator, water-filled pulse forming line (PFL), water-filled coaxial transmission line, threecell inductive voltage adder, and rod-pinch diode. A primary source of fluctuation in Cygnus shot-to-shot performance may be jitter in breakdown of the main PFL switch, which is a “self-break” switch. The PFL switch breakdown time determines the peak PFL charging voltage, which ultimately affects the source X-ray spectrum and dose. Therefore, PFL switch jitter may contribute to shot-to-shot variation in these parameters, which are crucial to radiographic quality. In this paper we will present PFL switch jitter analysis for both Cygnus machines and present the correlation with dose. For this analysis, the PFL switch on each machine was maintained at a single gap setting, which has been used for the majority of shots at NTS. In addition the PFL switch performance for one larger switch gap setting will be examined.

  11. uv preilluminated gas switches

    SciTech Connect

    Bradley, L.P.; Orham, E.L.; Stowers, I.F.; Braucht, J.R.

    1980-06-03

    We have designed, built, and characterized uv preilluminated gas switches for a trigger circuit and a low inductance discharge circuit. These switches have been incorporated into a 54 x 76 x 150 cm pulser module to produce a 1 Ma output current rising at 5 x 10/sup 12/ amps/sec with 1 ns jitter. Twenty such modules will be used on the Nova Inertial Confinement Fusion Laser System for plasma retropulse shutters.

  12. High Power Switching Transistor

    NASA Technical Reports Server (NTRS)

    Hower, P. L.; Kao, Y. C.; Carnahan, D. C.

    1983-01-01

    Improved switching transistors handle 400-A peak currents and up to 1,200 V. Using large diameter silicon wafers with twice effective area as D60T, form basis for D7 family of power switching transistors. Package includes npn wafer, emitter preform, and base-contact insert. Applications are: 25to 50-kilowatt high-frequency dc/dc inverters, VSCF converters, and motor controllers for electrical vehicles.

  13. Cygnus Water Switch Jitter

    SciTech Connect

    Charles V. Mitton, George D. Corrow, Mark D. Hansen, David J. Henderson, et al.

    2008-03-01

    The Cygnus Dual Beam Radiographic Facility consists of two identical radiographic sources - Cygnus 1 and Cygnus 2. Each source has the following x-ray output: 1-mm diameter spot size, 4 rad at 1 m, 50-ns Full Width Half Max. The diode pulse has the following electrical specifications: 2.25 MV, 60 kA, 60 ns. This Radiographic Facility is located in an underground tunnel test area at the Nevada Test Site (NTS). The sources were developed to produce high-resolution images on subcritical tests which are performed at NTS. Subcritical tests are single-shot, high-value events. For this application, it is desirable to maintain a high level of reproducibility in source output. The major components of the Cygnus machines are: Marx generator, water-filled pulse–forming line (PFL), water-filled coaxial transmission line, three-cell inductive voltage adder, and rod-pinch diode. A primary source of fluctuation in Cygnus shot-to-shot performance is jitter in breakdown of the main PFL switch, which is a “self-break” switch. The PFL switch breakdown time determines the peak PFL charging voltage, which ultimately affects the diode pulse. Therefore, PFL switch jitter contributes to shot-to-shot variation in source endpoint energy and dose. In this paper we will present PFL switch jitter analysis for both Cygnus machines and give the correlation with diode performance. For this analysis the PFL switch on each machine was maintained at a single gap setting which has been used for the majority of shots at NTS. In addition to this analysis, PFL switch performance for different switch gap settings taken recently will be examined. Lastly, implications of source jitter for radiographic diagnosis of subcritical shots will be discussed.

  14. Finding a stabilising switching law for switching nonlinear models

    NASA Astrophysics Data System (ADS)

    Lendek, Zs.; Raica, P.; Lauber, J.; Guerra, T. M.

    2016-09-01

    This paper considers the stabilisation of switching nonlinear models by switching between the subsystems. We assume that arbitrary switching between two subsystems is possible once a subsystem has been active for a predefined number of samples. We use a Takagi-Sugeno representation of the models and a switching Lyapunov function is employed to develop sufficient stability conditions. If the conditions are satisfied, we construct a switching law that stabilises the system. The application of the conditions is illustrated in several examples.

  15. Low inductance gas switching.

    SciTech Connect

    Chavez, Ray; Harjes, Henry Charles III; Wallace, Zachariah; Elizondo, Juan E.

    2007-10-01

    The laser trigger switch (LTS) is a key component in ZR-type pulsed power systems. In ZR, the pulse rise time through the LTS is > 200 ns and additional stages of pulse compression are required to achieve the desired <100 ns rise time. The inductance of the LTS ({approx}500nH) in large part determines the energy transfer time through the switch and there is much to be gained in improving system performance and reducing system costs by reducing this inductance. The current path through the cascade section of the ZR LTS is at a diameter of {approx} 6-inches which is certainly not optimal from an inductance point of view. The LTS connects components of much greater diameter (typically 4-5 feet). In this LDRD the viability of switch concepts in which the diameter of cascade section is greatly increased have been investigated. The key technical question to be answered was, will the desired multi-channel behavior be maintained in a cascade section of larger diameter. This LDRD proceeded in 2 distinct phases. The original plan for the LDRD was to develop a promising switch concept and then design, build, and test a moderate scale switch which would demonstrate the key features of the concept. In phase I, a switch concept which meet all electrical design criteria and had a calculated inductance of 150 nH was developed. A 1.5 MV test switch was designed and fabrication was initiated. The LDRD was then redirected due to budgetary concerns. The fabrication of the switch was halted and the focus of the LDRD was shifted to small scale experiments designed to answer the key technical question concerning multi-channel behavior. In phase II, the Multi-channel switch test bed (MCST) was designed and constructed. The purpose of MCST was to provide a versatile, fast turn around facility for the study the multi-channel electrical breakdown behavior of a ZR type cascade switch gap in a parameter space near that of a ZR LTS. Parameter scans on source impedance, gap tilt, gap spacing and

  16. Innovative switching technology

    NASA Astrophysics Data System (ADS)

    Rosen, A.; Stabile, P. J.; Gombar, A. M.; Janton, W. M.; Gilbert, D. B.; Herczfeld, P. R.; Bahasadri, A.

    1991-03-01

    We have developed an all-semiconductor high-power optical switch. Potential uses include both military applications, such as ultra-wide-band impulse radar and high-frequency antenna couplers, and commercial use, such as high-power switching for utility companies. Under this three-year program, we have demonstrated various switching applications from dc to GHz frequencies. The generic switches comprise a 2-D semiconductor laser diode array and Si or GaAs devices. In the Si area (linear switches - no gain) and dc-biased network, a single two-sided PIN device, activated by two 1 kW laser arrays, has yielded a holding voltage of 1.3 kV and conducted 192 A. Similar devices have later yielded a holding voltage of 3.3 kV, demonstrating the capability of switching more than 500 kW with a single two-sided PIN device. The same generic technology was also demonstrated in high-power high-frequency antenna coupler applications as well as in mm-wave (60 GHz) attenuators and phase shifters. PIN devices tested in a RF circuit between 2-30 MHz yielded an isolation value of between 28 and 49 dB in the off-state, and insertion losses as low as 0.1 dB when illuminated with 280 W (peak) optical power at 808 nm. In the area of GaAs, PIN, and bulk devices under this project, we were able to deliver devices for experiments in both opening and closing switches. We have demonstrated a compact, all-semiconductor switch system that has switched up to 8.5 MW into a 38 (omega) load. The system uses a 2-D laser diode array with a peak power of 850 W to rigger a 1.5 cm long GaAs photoconductor into a high-gain combination mode known as 'lock on'. The highest power switch was pulse-charged to 55 kV and delivered 470 A to a 38 (omega) load in 160 ns long pulse. In the area of 2-D laser arrays, a peak power density of 7 kW/cm(exp 2) was achieved.

  17. A radiation hard vacuum switch

    DOEpatents

    Boettcher, G.E.

    1988-07-19

    A vacuum switch with an isolated trigger probe which is not directly connected to the switching electrodes. The vacuum switch within the plasmatron is triggered by plasma expansion initiated by the trigger probe which travels through an opening to reach the vacuum switch elements. The plasma arc created is directed by the opening to the space between the anode and cathode of the vacuum switch to cause conduction. 3 figs.

  18. Long Life MEM Switch Technology

    DTIC Science & Technology

    2006-05-23

    The first type of MEM switch developed was the miniature switched capacitor. This device is 150-300 times smaller than conventional MEM switches...down and the shunt capacitance to the ground is increased. The mechanical behavior of the MEM capacitor is designed using conventional mechanical...switched capacitors. It proves that by decreasing the size, miniature switched capacitors with Con/ Coff =2.8 for a single bridge and Con/ Coff =1.9 for a 3

  19. Adult Basic Education Basic Computer Literacy Handbook.

    ERIC Educational Resources Information Center

    Manini, Catalina M.; Cervantes, Juan

    This handbook, in both English and Spanish versions, is intended for use with adult basic education (ABE) students. It contains five sections of basic computer literacy activities and information about the ABE computer literacy course offered at Dona Ana Community College (DACC) in New Mexico. The handbook begins with forewords by the handbook's…

  20. DC switching regulated power supply for driving an inductive load

    DOEpatents

    Dyer, G.R.

    1983-11-29

    A dc switching regulated power supply for driving an inductive load is provided. The regulator basic circuit is a bridge arrangement of diodes and transistors. First and second opposite legs of the bridge are formed by first and second parallel-connected transistor arrays, respectively, while the third and fourth legs of the bridge are formed by appropriately connected first and second parallel connected diode arrays, respectively. A dc power supply is connected to the input of the bridge and the output is connected to the load. A servo controller is provided to control the switching rate of the transistors to maintain a desired current to the load. The regulator may be operated in three stages or modes: (1) for current runup in the load, both first and second transistor switch arrays are turned on and current is supplied to the load through both transistor arrays. (2) When load current reaches the desired level, the first switch is turned off, and load current flywheels through the second switch array and the fourth leg diode array connecting the second switch array in series with the load. Current is maintained by alternating between modes 1 and 2 at a suitable duty cycle and switching rate set by the controller. (3) Rapid current rundown is accomplished by turning both switch arrays off, allowing load current to be dumped back into the source through the third and fourth diode arrays connecting the source in series opposition with the load to recover energy from the inductive load.

  1. Switching power pulse system

    DOEpatents

    Aaland, K.

    1983-08-09

    A switching system for delivering pulses of power from a source to a load using a storage capacitor charged through a rectifier, and maintained charged to a reference voltage level by a transistor switch and voltage comparator. A thyristor is triggered to discharge the storage capacitor through a saturable reactor and fractional turn saturable transformer having a secondary to primary turn ratio N of n:l/n = n[sup 2]. The saturable reactor functions as a soaker'' while the thyristor reaches saturation, and then switches to a low impedance state. The saturable transformer functions as a switching transformer with high impedance while a load coupling capacitor charges, and then switches to a low impedance state to dump the charge of the storage capacitor into the load through the coupling capacitor. The transformer is comprised of a multilayer core having two secondary windings tightly wound and connected in parallel to add their output voltage and reduce output inductance, and a number of single turn windings connected in parallel at nodes for the primary winding, each single turn winding linking a different one of the layers of the multilayer core. The load may be comprised of a resistive beampipe for a linear particle accelerator and capacitance of a pulse forming network. To hold off discharge of the capacitance until it is fully charged, a saturable core is provided around the resistive beampipe to isolate the beampipe from the capacitance until it is fully charged. 5 figs.

  2. Atomic Scale Plasmonic Switch.

    PubMed

    Emboras, Alexandros; Niegemann, Jens; Ma, Ping; Haffner, Christian; Pedersen, Andreas; Luisier, Mathieu; Hafner, Christian; Schimmel, Thomas; Leuthold, Juerg

    2016-01-13

    The atom sets an ultimate scaling limit to Moore's law in the electronics industry. While electronics research already explores atomic scales devices, photonics research still deals with devices at the micrometer scale. Here we demonstrate that photonic scaling, similar to electronics, is only limited by the atom. More precisely, we introduce an electrically controlled plasmonic switch operating at the atomic scale. The switch allows for fast and reproducible switching by means of the relocation of an individual or, at most, a few atoms in a plasmonic cavity. Depending on the location of the atom either of two distinct plasmonic cavity resonance states are supported. Experimental results show reversible digital optical switching with an extinction ratio of 9.2 dB and operation at room temperature up to MHz with femtojoule (fJ) power consumption for a single switch operation. This demonstration of an integrated quantum device allowing to control photons at the atomic level opens intriguing perspectives for a fully integrated and highly scalable chip platform, a platform where optics, electronics, and memory may be controlled at the single-atom level.

  3. Silicon carbide photoconductive switches

    NASA Astrophysics Data System (ADS)

    Saddow, Stephen E.

    1994-09-01

    The optoelectronic properties of p-type 6-H silicon carbide (6H-SiC) have been investigated in an experiment that used lateral and vertical photoconductive (PC) switches. Both photovoltaic and photoconductive effects are reported, which were observed on switches using both geometries and measured at several wavelengths near the 6H-SiC absorption edge. PC techniques were employed to measure the surface and bulk carrier lifetimes of 40 and 200 ns, respectively. The switches displayed a high-speed photovoltaic response to picosecond laser excitations in the UV and visible spectral regions. In particular, efficient subnanosecond optical absorption processes were observed in the visible region. The photovoltage was measured as a function of both laser wavelength (and hence absorption depth) and laser beam position within the switching gap. The switch response to picosecond laser pulses in the UV, violet, green, and red spectral regions was shown to have subnanosecond photovoltaic response times. Finally, since the optical absorption coefficient had not been well established for device-grade 6H-SiC, the optical absorption coefficient near the 6H-SiC bandgap energy (Eg) was also measured, and the bandgap was determined to be approximately 3.1 eV.

  4. Multiple switch actuator

    DOEpatents

    Beyer, Edward T.

    1976-01-06

    The present invention relates to switches and switch actuating devices to be operated for purposes of arming a bomb or other missile as it is dropped or released from an aircraft. The particular bomb or missile in which this invention is applied is one in which there is a plurality of circuits which are to be armed by the closing of switches upon dropping or releasing of the bomb. The operation of the switches to closed position is normally accomplished by means of a pull-out wire; that is, a wire which is withdrawn from the bomb or missile at the time of release of the bomb, one end of the wire being attached to the aircraft. The conditions to be met are that the arming switches must be positively and surely maintained in open position until the bomb is released and the arming action is effected. The action of the pull-out wire in achieving the arming action must be sure and positive with minimum danger of malfunctioning, jamming or binding.

  5. Thermionic gas switch

    DOEpatents

    Hatch, G.L.; Brummond, W.A.; Barrus, D.M.

    1984-04-05

    The present invention is directed to an improved temperature responsive thermionic gas switch utilizing a hollow cathode and a folded emitter surface area. The folded emitter surface area of the thermionic switch substantially increases the on/off ratio by changing the conduction surface area involved in the two modes thereof. The improved switch of this invention provides an on/off ratio of 450:1 compared to the 10:1 ratio of the prior known thermionic switch, while providing for adjusting the on current. In the improved switch of this invention the conduction area is made small in the off mode, while in the on mode the conduction area is made large. This is achieved by utilizing a folded hollow cathode configuration and utilizing a folded emitter surface area, and by making the dimensions of the folds small enough so that a space charge will develop in the convolutions of the folds and suppress unignited current, thus limiting the current carrying surface in the off mode.

  6. Microfabricated triggered vacuum switch

    DOEpatents

    Roesler, Alexander W.; Schare, Joshua M.; Bunch, Kyle

    2010-05-11

    A microfabricated vacuum switch is disclosed which includes a substrate upon which an anode, cathode and trigger electrode are located. A cover is sealed over the substrate under vacuum to complete the vacuum switch. In some embodiments of the present invention, a metal cover can be used in place of the trigger electrode on the substrate. Materials used for the vacuum switch are compatible with high vacuum, relatively high temperature processing. These materials include molybdenum, niobium, copper, tungsten, aluminum and alloys thereof for the anode and cathode. Carbon in the form of graphitic carbon, a diamond-like material, or carbon nanotubes can be used in the trigger electrode. Channels can be optionally formed in the substrate to mitigate against surface breakdown.

  7. Switching power supply

    DOEpatents

    Mihalka, A.M.

    1984-06-05

    The invention is a repratable capacitor charging, switching power supply. A ferrite transformer steps up a dc input. The transformer primary is in a full bridge configuration utilizing power MOSFETs as the bridge switches. The transformer secondary is fed into a high voltage, full wave rectifier whose output is connected directly to the energy storage capacitor. The transformer is designed to provide adequate leakage inductance to limit capacitor current. The MOSFETs are switched to the variable frequency from 20 to 50 kHz to charge a capacitor from 0.6 kV. The peak current in a transformer primary and secondary is controlled by increasing the pulse width as the capacitor charges. A digital ripple counter counts pulses and after a preselected desired number is reached an up-counter is clocked.

  8. SWITCH user's manual

    NASA Technical Reports Server (NTRS)

    1987-01-01

    The planning program, SWITCH, and its surrounding changed-goal-replanning program, Runaround, are described. The evolution of SWITCH and Runaround from an earlier planner, DEVISER, is recounted. SWITCH's plan representation, and its process of building a plan by backward chaining with strict chronological backtracking, are described. A guide for writing knowledge base files is provided, as are narrative guides for installing the program, running it, and interacting with it while it is running. Some utility functions are documented. For the sake of completeness, a narrative guide to the experimental discrepancy-replanning feature is provided. Appendices contain knowledge base files for a blocksworld domain, and a DRIBBLE file illustrating the output from, and user interaction with, the program in that domain.

  9. FAST ACTING CURRENT SWITCH

    DOEpatents

    Batzer, T.H.; Cummings, D.B.; Ryan, J.F.

    1962-05-22

    A high-current, fast-acting switch is designed for utilization as a crowbar switch in a high-current circuit such as used to generate the magnetic confinement field of a plasma-confining and heat device, e.g., Pyrotron. The device particularly comprises a cylindrical housing containing two stationary, cylindrical contacts between which a movable contact is bridged to close the switch. The movable contact is actuated by a differential-pressure, airdriven piston assembly also within the housing. To absorb the acceleration (and the shock imparted to the device by the rapidly driven, movable contact), an adjustable air buffer assembly is provided, integrally connected to the movable contact and piston assembly. Various safety locks and circuit-synchronizing means are also provided to permit proper cooperation of the invention and the high-current circuit in which it is installed. (AEC)

  10. SHOCKPROOF MAGNETIC REED SWITCH

    DOEpatents

    Medal, E.

    1962-03-13

    A shockproof magnetic reed switch is described which comprises essentially a plurality of pairs of reed contacts of magnetic, electrical conducting material which are arranged generally in circumferential spaced relationship. At least two of the pairs are disposed to operate at a predetermined angle with respect to each other, and the contacts are wired in the circuit, so that the continuity, or discontinuity, of the circuit is not affected by a shock imposed on the switch. The contacts are hermetically sealed within an outer tubular jacket. (AEC)

  11. Thermionic gas switch

    DOEpatents

    Hatch, George L.; Brummond, William A.; Barrus, Donald M.

    1986-01-01

    A temperature responsive thermionic gas switch having folded electron emitting surfaces. An ionizable gas is located between the emitter and an interior surface of a collector, coaxial with the emitter. In response to the temperature exceeding a predetermined level, sufficient electrons are derived from the emitter to cause the gas in the gap between the emitter and collector to become ionized, whereby a very large increase in current in the gap occurs. Due to the folded emitter surface area of the switch, increasing the "on/off" current ratio and adjusting the "on" current capacity is accomplished.

  12. Organometallic spintronics: dicobaltocene switch.

    PubMed

    Liu, Rui; Ke, San-Huang; Baranger, Harold U; Yang, Weitao

    2005-10-01

    A single-molecule spintronic switch and spin valve using two cobaltocene moieties is proposed. Spin-dependent transport through a lead-molecule-lead junction has been calculated using first-principles density functional and nonequilibrium Green function methods. We find that the antiparallel (singlet) configuration of the cobaltocene spins blocks electron transport near the Fermi energy, while the spin parallel (triplet) configuration enables much higher current. The energy difierence between the antiparallel and parallel states depends on the insulating spacer separating the two cobaltocenes, allowing switching through the application of a moderate magnetic field.

  13. Main electrical switch banks, plant switch house, looking to the ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Main electrical switch banks, plant switch house, looking to the North - Bureau of Mines Metallurgical Research Laboratory, Original Building, Date Street north of U.S. Highway 93, Boulder City, Clark County, NV

  14. Hybrid solid state switch replaces motor- driven power switch

    NASA Technical Reports Server (NTRS)

    Booth, R. A.; Schloss, A. I.

    1967-01-01

    Hybrid solid state switch replaces existing motor-driven power switches used on spacecraft. It uses a transistor circuit to limit the open circuit voltage and allow small relay contacts to handle high transient currents at reasonable cycle life.

  15. 41. INTERIOR VIEW, GREEN SWITCH TOWER, COS COB, SHOWING SWITCH ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    41. INTERIOR VIEW, GREEN SWITCH TOWER, COS COB, SHOWING SWITCH LEVER ASSEMBLAGE AND DISPLAY BOARD - New York, New Haven & Hartford Railroad, Automatic Signalization System, Long Island Sound shoreline between Stamford & New Haven, Stamford, Fairfield County, CT

  16. 35. END VIEW, INTERIOR, SHOWING SWITCHING LEVERS, BERK SWITCH TOWER, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    35. END VIEW, INTERIOR, SHOWING SWITCHING LEVERS, BERK SWITCH TOWER, SOUTH NORWALK - New York, New Haven & Hartford Railroad, Automatic Signalization System, Long Island Sound shoreline between Stamford & New Haven, Stamford, Fairfield County, CT

  17. 36. INTERIOR VIEW, BERK SWITCH TOWER, SOUTH NORWALK, SHOWING SWITCHING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    36. INTERIOR VIEW, BERK SWITCH TOWER, SOUTH NORWALK, SHOWING SWITCHING LEVERS FROM OPERATOR'S POSITION - New York, New Haven & Hartford Railroad, Automatic Signalization System, Long Island Sound shoreline between Stamford & New Haven, Stamford, Fairfield County, CT

  18. 43. OBLIQUE VIEW, GREEN SWITCH TOWER, COS COB, SHOWING SWITCH ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    43. OBLIQUE VIEW, GREEN SWITCH TOWER, COS COB, SHOWING SWITCH LEVER ASSEMBLAGE AND DISPLAY BOARD - New York, New Haven & Hartford Railroad, Automatic Signalization System, Long Island Sound shoreline between Stamford & New Haven, Stamford, Fairfield County, CT

  19. BASIC Tools: Structured Programming Techniques in BASIC.

    ERIC Educational Resources Information Center

    Moyer, Patrick C.

    1985-01-01

    Structured programing is an attempt to formalize the logic and structure of computer programs. Examples of structured programing techniques in BASIC are provided. Two major disadvantages of this style of programing for the personal user are noted. (JN)

  20. Under sleeper pads in switches & crossings

    NASA Astrophysics Data System (ADS)

    Plasek, Otto; Hruzikova, Miroslava

    2017-09-01

    Under sleeper pads (USPs) have been installed in the Czech railway lines since 2007 into two trial sections in switches and crossings and in a trial section with the aim to reduce rail pitch corrugation. The basic motivation for the construction of the trial track sections in turnouts was an evaluation of USPs’ influence on improvement of track quality as a consequence of ballast bed protection against extreme stress. The paper comprises experience of USPs installation in the Czech Republic in the two trial sections with switches and crossings built in 2007 and 2014. The paper particularly provides an information about USPs applications focusing on the track settlement received by an evaluation of data from the geodetic surveying by precise levelling. Some positive influence of under sleeper pads on the track quality is observed.

  1. Modelling, analyses and design of switching converters

    NASA Technical Reports Server (NTRS)

    Cuk, S. M.; Middlebrook, R. D.

    1978-01-01

    A state-space averaging method for modelling switching dc-to-dc converters for both continuous and discontinuous conduction mode is developed. In each case the starting point is the unified state-space representation, and the end result is a complete linear circuit model, for each conduction mode, which correctly represents all essential features, namely, the input, output, and transfer properties (static dc as well as dynamic ac small-signal). While the method is generally applicable to any switching converter, it is extensively illustrated for the three common power stages (buck, boost, and buck-boost). The results for these converters are then easily tabulated owing to the fixed equivalent circuit topology of their canonical circuit model. The insights that emerge from the general state-space modelling approach lead to the design of new converter topologies through the study of generic properties of the cascade connection of basic buck and boost converters.

  2. Ecdysone Receptor Gene Switch Technology for Inducible Gene Expression in Plants

    USDA-ARS?s Scientific Manuscript database

    Inducible gene regulation systems based on specific chemicals have many potential applications in agriculture and in the basic understanding of gene function. As a result several gene switches have been developed. However, the properties of the chemicals used in most of these switches make their use...

  3. PASCAL vs BASIC

    ERIC Educational Resources Information Center

    Mundie, David A.

    1978-01-01

    A comparison between PASCAL and BASIC as general purpose microprocessor languages rates PASCAL above BASIC in such points as program structure, data types, structuring methods, control structures, procedures and functions, and ease in learning. (CMV)

  4. Health Insurance Basics

    MedlinePlus

    ... Loss Surgery? A Week of Healthy Breakfasts Shyness Health Insurance Basics KidsHealth > For Teens > Health Insurance Basics A ... thought advanced calculus was confusing. What Exactly Is Health Insurance? Health insurance is a plan that people buy ...

  5. PASCAL vs BASIC

    ERIC Educational Resources Information Center

    Mundie, David A.

    1978-01-01

    A comparison between PASCAL and BASIC as general purpose microprocessor languages rates PASCAL above BASIC in such points as program structure, data types, structuring methods, control structures, procedures and functions, and ease in learning. (CMV)

  6. Health Insurance Basics

    MedlinePlus

    ... Loss Surgery? A Week of Healthy Breakfasts Shyness Health Insurance Basics KidsHealth > For Teens > Health Insurance Basics Print ... thought advanced calculus was confusing. What Exactly Is Health Insurance? Health insurance is a plan that people buy ...

  7. Technology's role in switching systems evolution

    SciTech Connect

    Ebert, I.; Richards, P. )

    1993-01-01

    Until recently, switching in North America was dominated by the drive for volume efficiency in what has come to be known as plain old telephone service, or POTS. During the electromechanical era - a period of about six decades - POTS became almost ubiquitous by the mid 1940s, while the real cost of a basic local call dropped dramatically. Direct distance dialing (DDD), introduced in the 1950s and widely available by the 1960s, triggered the drive for similar volume efficiencies in long-distance service. However, the basic service definition and accompanying protocols - both human and electromechanical - were still largely defined by the capabilities of the original Strowger technology. When stored program control switching made its appearance in the 1970s, and digital technology began to penetrate the network in the 1980s, POTS efficiencies continued to be the main objective - most notably in the maintenance area. But stored program machines also opened the door to other applications, and systems that made use of a common hardware and software base were able to provide a diverse range of capabilities. For instance, because the software could be customized for a wide range of vertical features, a single platform could provide anything from ordinary local service, through call waiting and Centrex, to large-scale private branch exchanges (PBX) and military applications. So it was not long before the operating companies realized that the competitive value of the new generation switches lay in their ability to deliver new services. Consequently, all through the 1980s, the switch imported new service responsibilities. Access to new features was by way of proprietary terminals, and feature networking could only be accomplished by means of proprietary protocols supported on a particular vendor's products. Services therefore remained nodal, and were aimed at the medium-to-large business market sector in direct competition with similar service offerings on PBXs.

  8. Photonic MEMS switch applications

    NASA Astrophysics Data System (ADS)

    Husain, Anis

    2001-07-01

    As carriers and service providers continue their quest for profitable network solutions, they have shifted their focus from raw bandwidth to rapid provisioning, delivery and management of revenue generating services. Inherently transparent to data rate the transmission wavelength and data format, MEMS add scalability, reliability, low power and compact size providing flexible solutions to the management and/or fiber channels in long haul, metro, and access networks. MEMS based photonic switches have gone from the lab to commercial availability and are now currently in carrier trials and volume production. 2D MEMS switches offer low up-front deployment costs while remaining scalable to large arrays. They allow for transparent, native protocol transmission. 2D switches enable rapid service turn-up and management for many existing and emerging revenue rich services such as storage connectivity, optical Ethernet, wavelength leasing and optical VPN. As the network services evolve, the larger 3D MEMS switches, which provide greater scalability and flexibility, will become economically viable to serve the ever-increasing needs.

  9. Kiowa Creek Switching Station

    SciTech Connect

    Not Available

    1990-03-01

    The Western Area Power Administration (Western) proposes to construct, operate, and maintain a new Kiowa Creek Switching Station near Orchard in Morgan County, Colorado. Kiowa Creek Switching Station would consist of a fenced area of approximately 300 by 300 feet and contain various electrical equipment typical for a switching station. As part of this new construction, approximately one mile of an existing 115-kilovolt (kV) transmission line will be removed and replaced with a double circuit overhead line. The project will also include a short (one-third mile) realignment of an existing line to permit connection with the new switching station. In accordance with the Council on Environmental Quality (CEQ) regulations for implementing the procedural provisions of the National Environmental Policy Act of 1969 (NEPA), 40 CFR Parts 1500--1508, the Department of Energy (DOE) has determined that an environmental impact statement (EIS) is not required for the proposed project. This determination is based on the information contained in this environmental assessment (EA) prepared by Western. The EA identifies and evaluates the environmental and socioeconomic effects of the proposed action, and concludes that the advance impacts on the human environment resulting from the proposed project would not be significant. 8 refs., 3 figs., 1 tab.

  10. Multipath star switch controller

    NASA Technical Reports Server (NTRS)

    Anderson, T. O.

    1980-01-01

    Device concept permits parallel computers to scan several commonnetwork-connected data stations at maximum rate. Sequencers leap-frog to bypass ports already being serviced by another computer. Two-path system for 16-port star switch controller is cost effective if added bandwidth or increased reliability is desired. Triple-path system would be cost effective for 32-port controller.

  11. Waveguide switch protector

    NASA Technical Reports Server (NTRS)

    Kolbly, R. B.

    1972-01-01

    Device for detecting excessive operation of electric motors used to drive waveguide switches is described. Purpose of device is to prevent burnout of electric motor in event of waveguide stoppage at some point other than extreme limits of travel. Operation of equipment, components used to sense motor performance, and schematic diagram are included.

  12. Gas injected vacuum switch

    DOEpatents

    Hardin, K. Dan

    1977-01-01

    The disclosure relates to a gas injected vacuum switch comprising a housing having an interior chamber, a conduit for evacuating the interior chamber, within the chamber an anode and a cathode spaced from the anode, and a detonator for injecting electrically conductive gas into the chamber between the anode and the cathode to provide a current path therebetween.

  13. Silicon Carbide Photoconductive Switches

    DTIC Science & Technology

    1994-09-01

    The optoelectronic properties of p-type 6-H silicon carbide (6H-SiC) have been investigated in an experiment that used lateral and vertical...and the bandgap was determined to be approximately 3.1 eV. 6H-SiC, Photoconductive, Photovoltaic, Absorption coefficient, Switch, Silicon carbide

  14. An integrated circuit switch

    NASA Technical Reports Server (NTRS)

    Bonin, E. L.

    1969-01-01

    Multi-chip integrated circuit switch consists of a GaAs photon-emitting diode in close proximity with S1 phototransistor. A high current gain is obtained when the transistor has a high forward common-emitter current gain.

  15. Molecular Rotors as Switches

    PubMed Central

    Xue, Mei; Wang, Kang L.

    2012-01-01

    The use of a functional molecular unit acting as a state variable provides an attractive alternative for the next generations of nanoscale electronics. It may help overcome the limits of conventional MOSFETd due to their potential scalability, low-cost, low variability, and highly integratable characteristics as well as the capability to exploit bottom-up self-assembly processes. This bottom-up construction and the operation of nanoscale machines/devices, in which the molecular motion can be controlled to perform functions, have been studied for their functionalities. Being triggered by external stimuli such as light, electricity or chemical reagents, these devices have shown various functions including those of diodes, rectifiers, memories, resonant tunnel junctions and single settable molecular switches that can be electronically configured for logic gates. Molecule-specific electronic switching has also been reported for several of these device structures, including nanopores containing oligo(phenylene ethynylene) monolayers, and planar junctions incorporating rotaxane and catenane monolayers for the construction and operation of complex molecular machines. A specific electrically driven surface mounted molecular rotor is described in detail in this review. The rotor is comprised of a monolayer of redox-active ligated copper compounds sandwiched between a gold electrode and a highly-doped P+ Si. This electrically driven sandwich-type monolayer molecular rotor device showed an on/off ratio of approximately 104, a read window of about 2.5 V, and a retention time of greater than 104 s. The rotation speed of this type of molecular rotor has been reported to be in the picosecond timescale, which provides a potential of high switching speed applications. Current-voltage spectroscopy (I-V) revealed a temperature-dependent negative differential resistance (NDR) associated with the device. The analysis of the device I–V characteristics suggests the source of the

  16. Exhaust Fan Temperature Switch

    SciTech Connect

    Ball, G.S.; /Fermilab

    1989-05-11

    The 13000 cfm 'emergency' vent fan must be protected from over cooling which would result in a mechanical failure. Over cooling could result from a catastrophic cryogen release from the cryostat(s) or Argon Storage Dewar. In order to protect the fan, a VPT has been calibrated for -31 C to open a switch which sends a signal to allow warm gas to enter the sump by means of a motor controlled louver installed at 'sidewalk level' in the ductwork between the assembly hall and the Argon Dewar Enclosure. The bulb of the VPT is enclosed in a thermal well and will be placed in the gas stream directly above the fan. The switching unit will be mounted nearby on the wall in order to isolate it from vibrational effects. Should the fan be activated due to a cryogen release, it should not experience any problems when operating above -40 C. The switch was set and checked in a saturated calcium chloride solution cooled to -31 C by running cold gaseous Nitrogen through a copper tube coiled in a dewar. Switching temperature was measured by a thermocouple tied to the VPT bulb. The thermocouple was checked in LN2, in an ice water bath, and against an ordinary thermometer (which was assumed to be accurate to plus or minus 0.3 C) at room temperature. The results are shown below in 'Table 1' By interpolation of the data, thermocouple error at -31.0 C was found to be 0.43 C on the warm side. Since this error was small, it was ignored. 'Table 2' shows the results of the tests. Ten readings were taken with the switch wired in the 'normally open' mode. This results in a signal at room temperature. The worst deviation was 2.5 C. Three readings were then taken from the 'normally closed' wiring arrangement (the way it will be wired for installation). The greatest deviation was 1.2 C. The next day, the switch was checked five times wired in the 'normally open' configuration. The greatest error was 1.1 C. A graph has been prepared showing the switching and resetting temperatures. The errors these

  17. Relocating Basic Writing

    ERIC Educational Resources Information Center

    Horner, Bruce

    2011-01-01

    I frame the continuing value of basic writing as part of a long tradition in composition studies challenging dominant beliefs about literacy and language abilities, and I link basic writing to emerging--e.g."translingual"--approaches to language. I identify basic writing as vital to the field of composition in its rejection of simplistic notions…

  18. Basic Cake Decorating Workbook.

    ERIC Educational Resources Information Center

    Bogdany, Mel

    Included in this student workbook for basic cake decorating are the following: (1) Drawings of steps in a basic way to ice a layer cake, how to make a paper cone, various sizes of flower nails, various sizes and types of tin pastry tubes, and special rose tubes; (2) recipes for basic decorating icings (buttercream, rose paste, and royal icing);…

  19. Basic Cake Decorating Workbook.

    ERIC Educational Resources Information Center

    Bogdany, Mel

    Included in this student workbook for basic cake decorating are the following: (1) Drawings of steps in a basic way to ice a layer cake, how to make a paper cone, various sizes of flower nails, various sizes and types of tin pastry tubes, and special rose tubes; (2) recipes for basic decorating icings (buttercream, rose paste, and royal icing);…

  20. Heat-transfer thermal switch

    NASA Technical Reports Server (NTRS)

    Friedell, M. V.; Anderson, A. J.

    1974-01-01

    Thermal switch maintains temperature of planetary lander, within definite range, by transferring heat. Switch produces relatively large stroke and force, uses minimum electrical power, is lightweight, is vapor pressure actuated, and withstands sterilization temperatures without damage.

  1. Automatic thermal switch. [spacecraft applications

    NASA Technical Reports Server (NTRS)

    Cunningham, J. W.; Wing, L. D. (Inventor)

    1983-01-01

    An automatic thermal switch to control heat flow includes two thermally conductive plates and a thermally conductive switch saddle pivotally mounted to the first plate. A flexible heat carrier is connected between the switch saddle and the second plate. A phase-change power unit, including a piston coupled to the switch saddle, is in thermal contact with the first thermally conductive plate. A biasing element biases the switch saddle in a predetermined position with respect to the first plate. When the phase-change power unit is actuated by an increase in heat transmitted through the first place, the piston extends and causes the switch saddle to pivot, thereby varying the thermal conduction between the two plates through the switch saddle and flexible heat carrier. The biasing element, switch saddle, and piston can be arranged to provide either a normally closed or normally opened thermally conductive path between the two plates.

  2. Switching power pulse system

    DOEpatents

    Aaland, Kristian

    1983-01-01

    A switching system for delivering pulses of power from a source (10) to a load (20) using a storage capacitor (C3) charged through a rectifier (D1, D2), and maintained charged to a reference voltage level by a transistor switch (Q1) and voltage comparator (12). A thyristor (22) is triggered to discharge the storage capacitor through a saturable reactor (18) and fractional turn saturable transformer (16) having a secondary to primary turn ratio N of n:l/n=n.sup.2. The saturable reactor (18) functions as a "soaker" while the thyristor reaches saturation, and then switches to a low impedance state. The saturable transformer functions as a switching transformer with high impedance while a load coupling capacitor (C4) charges, and then switches to a low impedance state to dump the charge of the storage capacitor (C3) into the load through the coupling capacitor (C4). The transformer is comprised of a multilayer core (26) having two secondary windings (28, 30) tightly wound and connected in parallel to add their output voltage and reduce output inductance, and a number of single turn windings connected in parallel at nodes (32, 34) for the primary winding, each single turn winding linking a different one of the layers of the multilayer core. The load may be comprised of a resistive beampipe (40) for a linear particle accelerator and capacitance of a pulse forming network (42). To hold off discharge of the capacitance until it is fully charged, a saturable core (44) is provided around the resistive beampipe (40) to isolate the beampipe from the capacitance (42) until it is fully charged.

  3. Reconfigurable Data Communications Packet-Switch Emulation Test Bed Demonstrated

    NASA Technical Reports Server (NTRS)

    Chu, Pong P.; Jones, Robert E.

    1999-01-01

    The Communications Technology Division at the NASA Lewis Research Center has an ongoing program to develop advanced switching and routing technology concepts for future satellite onboard processing systems. Through a university grant as a part of this research, the Cleveland State University is using a flexible reconfigurable data communications packet switch emulation test bed to investigate packet switching techniques. Because of the switching speed and protocol complexity, implementing a data communications network is a tremendous task. Various alternatives should be carefully studied and evaluated in the development stage so that the optimal system configuration can be obtained and implemented later. Therefore, it is desirable to predict the performance of the network before it is actually constructed. This is especially true in the case of satellite systems. In the past, theoretical analysis, software simulation, and prototyping were used to evaluate performance. However, each method has its drawback. There are basic tradeoffs among accuracy, cost, and required evaluation time. No method is completely satisfactory.

  4. Optical backplane interconnect switch for data processors and computers

    NASA Technical Reports Server (NTRS)

    Hendricks, Herbert D.; Benz, Harry F.; Hammer, Jacob M.

    1989-01-01

    An optoelectronic integrated device design is reported which can be used to implement an all-optical backplane interconnect switch. The switch is sized to accommodate an array of processors and memories suitable for direct replacement into the basic avionic multiprocessor backplane. The optical backplane interconnect switch is also suitable for direct replacement of the PI bus traffic switch and at the same time, suitable for supporting pipelining of the processor and memory. The 32 bidirectional switchable interconnects are configured with broadcast capability for controls, reconfiguration, and messages. The approach described here can handle a serial interconnection of data processors or a line-to-link interconnection of data processors. An optical fiber demonstration of this approach is presented.

  5. Optical backplane interconnect switch for data processors and computers

    NASA Technical Reports Server (NTRS)

    Hendricks, Herbert D.; Benz, Harry F.; Hammer, Jacob M.

    1989-01-01

    An optoelectronic integrated device design is reported which can be used to implement an all-optical backplane interconnect switch. The switch is sized to accommodate an array of processors and memories suitable for direct replacement into the basic avionic multiprocessor backplane. The optical backplane interconnect switch is also suitable for direct replacement of the PI bus traffic switch and at the same time, suitable for supporting pipelining of the processor and memory. The 32 bidirectional switchable interconnects are configured with broadcast capability for controls, reconfiguration, and messages. The approach described here can handle a serial interconnection of data processors or a line-to-link interconnection of data processors. An optical fiber demonstration of this approach is presented.

  6. Nanoscale molecular-switch devices fabricated by imprint lithography

    NASA Astrophysics Data System (ADS)

    Chen, Yong; Ohlberg, Douglas A. A.; Li, Xuema; Stewart, Duncan R.; Stanley Williams, R.; Jeppesen, Jan O.; Nielsen, Kent A.; Stoddart, J. Fraser; Olynick, Deirdre L.; Anderson, Erik

    2003-03-01

    Nanoscale molecular-electronic devices comprising a single molecular monolayer of bistable [2]rotaxanes sandwiched between two 40-nm metal electrodes were fabricated using imprint lithography. Bistable current-voltage characteristics with high on-off ratios and reversible switching properties were observed. Such devices may function as basic elements for future ultradense electronic circuitry.

  7. Protein Conformational Switches: From Nature to Design

    PubMed Central

    Ha, Jeung-Hoi

    2012-01-01

    Protein conformational switches alter their shape upon receiving an input signal, such as ligand binding, chemical modification, or change in environment. The apparent simplicity of this transformation—which can be carried out by a molecule as small as a thousand atoms or so—belies its critical importance to the life of the cell as well as its capacity for engineering by humans. In the realm of molecular switches, proteins are unique because they are capable of performing a variety of biological functions. Switchable proteins are therefore of high interest to the fields of biology, bio-technology, and medicine. These molecules are beginning to be exploited as the core machinery behind a new generation of biosensors, functionally regulated enzymes, and “smart” biomaterials that react to their surroundings. As inspirations for these designs, researchers continue to analyze existing examples of allosteric proteins. Recent years have also witnessed the development of new methodologies for introducing conformational change into proteins that previously had none. Herein we review examples of both natural and engineered protein switches in the context of four basic modes of conformational change: rigid-body domain movement, limited structural rearrangement, global fold switching, and folding–unfolding. Our purpose is to highlight examples that can potentially serve as platforms for the design of custom switches. Accordingly, we focus on inducible conformational changes that are substantial enough to produce a functional response (e.g., in a second protein to which it is fused), yet are relatively simple, structurally well-characterized, and amenable to protein engineering efforts. PMID:22688954

  8. Transparent electrode for optical switch

    DOEpatents

    Goldhar, J.; Henesian, M.A.

    1984-10-19

    The invention relates generally to optical switches and techniques for applying a voltage to an electro-optical crystal, and more particularly, to transparent electodes for an optical switch. System architectures for very large inertial confinement fusion (ICF) lasers require active optical elements with apertures on the order of one meter. Large aperture optical switches are needed for isolation of stages, switch-out from regenerative amplifier cavities and protection from target retroreflections.

  9. Radiation sensitive solid state switch

    NASA Technical Reports Server (NTRS)

    Hutto, R. J. (Inventor)

    1973-01-01

    A mechanically operable solid state switch suited for use in achieving a variable circuit-switching function is described. This switch is characterized by an annular array of photoresponsive switching devices, disposed in communication with an included source of radiation, and a plurality of interchangeable, mechanically operable interrupter disks. Each disk has a predetermined pattern of transparent and opaque portions. Operative displacement of each disk serves to make and break selected electrical circuits through the photo responsive devices of said array.

  10. Easily-wired toggle switch

    NASA Technical Reports Server (NTRS)

    Dean, W. T.; Stringer, E. J.

    1979-01-01

    Crimp-type connectors reduce assembly and disassembly time. With design, no switch preparation is necessary and socket contracts are crimped to wires inserted in module attached to back of toggle switch engaging pins inside module to make electrical connections. Wires are easily removed with standard detachment tool. Design can accommodate wires of any gage and as many terminals can be placed on switch as wire gage and switch dimensions will allow.

  11. Development of micromachined RF switches with piezofilm actuation

    NASA Astrophysics Data System (ADS)

    Fox, Colin H.; Chen, Xuesheng; Jiang, Hong Wen; Kirby, Paul B.; McWilliam, Stewart

    2002-07-01

    Current developments in RF systems require high-performance switches for applications including signal routing, impedance matching and adjustable gain amplifiers. The use of micro-switches to replace traditional semiconductor components is increasingly common, because of their advantages in terms of electrical isolation and power loss. This paper reports on a research program relating to the development of a silicon micro-machined RF micro-switch that uses thin-film piezoelectric material for actuation. Piezoelectric actuation has potential advantages over electrostatic actuation in terms of achievable forces and simplicity of structural design. This paper gives an overview of the design and analysis of a prototype switch. The design concept, based on a cantilevered silicon beam or plate, is described. A low order mathematical model, incorporating the mechanical and electrical characteristics of the switch and the interaction between the silicon structure and the piezo-drive is summarized. This allows the basic behavior of the switch to be quantified, and provides a useful tool for design and optimization purposes. The outline design and manufacture/processing of a prototype switch is discussed.

  12. Illuminated push-button switch

    NASA Technical Reports Server (NTRS)

    Iwagiri, T.

    1983-01-01

    An illuminated push-button switch is described. It is characterized by the fact that is consists of a switch group, an operator button opening and closing the switch group, and a light-emitting element which illuminates the face of the operator button.

  13. Illuminated push-button switch

    NASA Astrophysics Data System (ADS)

    Iwagiri, T.

    1983-05-01

    An illuminated push-button switch is described. It is characterized by the fact that is consists of a switch group, an operator button opening and closing the switch group, and a light-emitting element which illuminates the face of the operator button.

  14. Organic Materials For Optical Switching

    NASA Technical Reports Server (NTRS)

    Cardelino, Beatriz H.

    1993-01-01

    Equations predict properties of candidate materials. Report presents results of theoretical study of nonlinear optical properties of organic materials. Such materials used in optical switching devices for computers and telecommunications, replacing electronic switches. Optical switching potentially offers extremely high information throughout in compact hardware.

  15. CMOS analog switches for adaptive filters

    NASA Technical Reports Server (NTRS)

    Dixon, C. E.

    1980-01-01

    Adaptive active low-pass filters incorporate CMOS (Complimentary Metal-Oxide Semiconductor) analog switches (such as 4066 switch) that reduce variation in switch resistance when filter is switched to any selected transfer function.

  16. High gain GaAs photoconductive semiconductor switches: Switch longevity

    SciTech Connect

    Loubriel, G.M.; Zutavern, F.J.; Mar, A.

    1998-07-01

    Optically activated, high gain GaAs switches are being tested for many different pulsed power applications that require long lifetime (longevity). The switches have p and n contact metallization (with intentional or unintentional dopants) configured in such a way as to produce p-i-n or n-i-n switches. The longevity of the switches is determined by circuit parameters and by the ability of the contacts to resist erosion. This paper will describe how the switches performed in test-beds designed to measure switch longevity. The best longevity was achieved with switches made with diffused contacts, achieving over 50 million pulses at 10 A and over 2 million pulses at 80 A.

  17. Sonic crystal acoustic switch device.

    PubMed

    Alagoz, Serkan; Alagoz, Baris Baykant

    2013-06-01

    This study reports a wave-controlled sonic crystal switch device that exhibits a destructive interference-based wave to wave reverse switching effect. By applying control waves, this acoustic device, composed of a two-dimensional square lattice sonic crystal block, reduces acoustic wave transmission from input to output. The finite difference time domain simulation and experimental results confirm the wave-to-wave reverse switching effect at the peak frequencies of the second band. The proposed sonic crystal switch prototype provides a contrast rate of 86% at 11.3 kHz frequency. This wave-to-wave switching effect is useful for controlling wave propagation for smart structure applications.

  18. Plasma opening switch

    DOEpatents

    Savage, Mark E.; Mendel, Jr., Clifford W.

    2001-01-01

    A command triggered plasma opening switch assembly using an amplification stage. The assembly surrounds a coaxial transmission line and has a main plasma opening switch (POS) close to the load and a trigger POS upstream from the main POS. The trigger POS establishes two different current pathways through the assembly depended on whether it has received a trigger current pulse. The initial pathway has both POS's with plasma between their anodes and cathodes to form a short across the transmission line and isolating the load. The final current pathway is formed when the trigger POS receives a trigger current pulse which energizes its fast coil to push the conductive plasma out from between its anode and cathode, allowing the main transmission line current to pass to the fast coil of the main POS, thus pushing its plasma out the way so as to establish a direct current pathway to the load.

  19. Future switching satellites

    NASA Technical Reports Server (NTRS)

    Campanella, S. Joseph; Pontano, Benjamin A.; Chalmers, Harvey

    1988-01-01

    Communications satellites of the future are likely to use much narrower beams in order to increase the uplink G/T and the downlink EIRP so that small earth terminals of the VSAT class can achieve full mesh connectivity. These satellites will need onboard switches to route traffic from originating upbeams to destination downbeams. This paper presents a new approach to accomplishing this rerouting using destination-directed packets that inherently carry the information needed to control the onboard switch connections and to adjust the traffic flow among the beams and the stations. The method also inherently provides channel multiplication and DAMA advantages which result in maximally efficient utilization of the space segment resource.

  20. Switched Matrix Accelerator

    SciTech Connect

    Whittum, David H

    2000-10-04

    We describe a new concept for a microwave circuit functioning as a charged-particle accelerator at mm-wavelengths, permitting an accelerating gradient higher than conventional passive circuits can withstand consistent with cyclic fatigue. The device provides acceleration for multiple bunches in parallel channels, and permits a short exposure time for the conducting surface of the accelerating cavities. Our analysis includes scalings based on a smooth transmission line model and a complementary treatment with a coupled-cavity simulation. We provide also an electromagnetic design for the accelerating structure, arriving at rough dimensions for a seven-cell accelerator matched to standard waveguide and suitable for bench tests at low power in air at 91.392. GHz. A critical element in the concept is a fast mm-wave switch suitable for operation at high-power, and we present the considerations for implementation in an H-plane tee. We discuss the use of diamond as the photoconductor switch medium.

  1. Optical fiber switch

    DOEpatents

    Early, James W.; Lester, Charles S.

    2002-01-01

    Optical fiber switches operated by electrical activation of at least one laser light modulator through which laser light is directed into at least one polarizer are used for the sequential transport of laser light from a single laser into a plurality of optical fibers. In one embodiment of the invention, laser light from a single excitation laser is sequentially transported to a plurality of optical fibers which in turn transport the laser light to separate individual remotely located laser fuel ignitors. The invention can be operated electro-optically with no need for any mechanical or moving parts, or, alternatively, can be operated electro-mechanically. The invention can be used to switch either pulsed or continuous wave laser light.

  2. Cryogenic switched MOSFET characterization

    NASA Technical Reports Server (NTRS)

    1981-01-01

    Both p channel and n channel enhancement mode MOSFETs can be readily switched on and off at temperatures as low as 2.8 K so that switch sampled readout of a VLWIR Ge:Ga focal plane is electronically possible. Noise levels as low as 100 rms electrons per sample (independent of sample rate) can be achieved using existing p channel MOSFETs, at overall rates up to 30,000 samples/second per multiplexed channel (e.g., 32 detectors at a rate of almost 1,000 frames/second). Run of the mill devices, including very low power dissipation n channel FETs would still permit noise levels of the order of 500 electrons/sample.

  3. The quantum cryptographic switch

    NASA Astrophysics Data System (ADS)

    Srinatha, N.; Omkar, S.; Srikanth, R.; Banerjee, Subhashish; Pathak, Anirban

    2014-01-01

    We illustrate the principle of a cryptographic switch for a quantum scenario, in which a third party (Charlie) can control to a continuously varying degree the amount of information the receiver (Bob) receives, after the sender (Alice) has sent her information through a quantum channel. Suppose Charlie transmits a Bell state to Alice and Bob. Alice uses dense coding to transmit two bits to Bob. Only if the 2-bit information corresponding to the choice of the Bell state is made available by Charlie to Bob can the latter recover Alice's information. By varying the amount of information Charlie gives, he can continuously alter the information recovered by Bob. The performance of the protocol as subjected to the squeezed generalized amplitude damping channel is considered. We also present a number of practical situations where a cryptographic switch would be of use.

  4. MULTIPLE SPARK GAP SWITCH

    DOEpatents

    Schofield, A.E.

    1958-07-22

    A multiple spark gap switch of unique construction is described which will permit controlled, simultaneous discharge of several capacitors into a load. The switch construction includes a disc electrode with a plurality of protuberances of generally convex shape on one surface. A firing electrode is insulatingly supponted In each of the electrode protuberances and extends substantially to the apex thereof. Individual electrodes are disposed on an insulating plate parallel with the disc electrode to form a number of spark gaps with the protuberances. These electrodes are each connected to a separate charged capacitor and when a voltage ls applied simultaneously between the trigger electrodes and the dlsc electrode, each spark gap fires to connect its capacitor to the disc electrode and a subsequent load.

  5. Many-Body Switches

    NASA Astrophysics Data System (ADS)

    MacDonald, Allan H.

    2014-03-01

    Most current electronic devices use gate voltages to switch individual electron transport channels or off. This architecture necessarily leads to operating voltages that are much larger than the temperature thermal energy, and places lower bounds on power consumption that are becoming. I will discuss strategies for achieving devices in which gates are used to collective many-electron states, in principle allowing charge transport to be switched by smaller voltage changes and both operating voltages and power consumption to reduced. I will specifically address devices based on the properties of itinerant electroninsulating magnetic systems, and devices based on bilayer exciton condensation. This work is based on work performed in collaboration with Sanjay Banerjee and Frank Register.

  6. Automatic switching matrix

    DOEpatents

    Schlecht, Martin F.; Kassakian, John G.; Caloggero, Anthony J.; Rhodes, Bruce; Otten, David; Rasmussen, Neil

    1982-01-01

    An automatic switching matrix that includes an apertured matrix board containing a matrix of wires that can be interconnected at each aperture. Each aperture has associated therewith a conductive pin which, when fully inserted into the associated aperture, effects electrical connection between the wires within that particular aperture. Means is provided for automatically inserting the pins in a determined pattern and for removing all the pins to permit other interconnecting patterns.

  7. Composite Material Switches

    NASA Technical Reports Server (NTRS)

    Javadi, Hamid (Inventor)

    2001-01-01

    A device to protect electronic circuitry from high voltage transients is constructed from a relatively thin piece of conductive composite sandwiched between two conductors so that conduction is through the thickness of the composite piece. The device is based on the discovery that conduction through conductive composite materials in this configuration switches to a high resistance mode when exposed to voltages above a threshold voltage.

  8. CREE: Making the Switch

    SciTech Connect

    Grider, David; Palmer, John

    2014-03-06

    CREE, with the help of ARPA-E funding, has developed a Silicon Carbide (SIC) transistor which can be used to create solid state transformers capable of meeting the unique needs of the emerging smart grid. SIC transistors are different from common silicon computer chips in that they handle grid scale voltages with ease and their high frequency switching is well suited to the intermittent nature of renewable energy generation.

  9. CREE: Making the Switch

    ScienceCinema

    Grider, David; Palmer, John

    2016-07-12

    CREE, with the help of ARPA-E funding, has developed a Silicon Carbide (SIC) transistor which can be used to create solid state transformers capable of meeting the unique needs of the emerging smart grid. SIC transistors are different from common silicon computer chips in that they handle grid scale voltages with ease and their high frequency switching is well suited to the intermittent nature of renewable energy generation.

  10. "Back to Basics" or "Forward to Basics"?

    ERIC Educational Resources Information Center

    Perso, Thelma

    2007-01-01

    Politicians have used the promise of "back to basics in our schools" as an educational platform for some time now, possibly in recognition that this is something the general population perceives as an issue they might just vote for. In the various positions the author has held, both professional and in community service, she has been…

  11. The Basic and Semi-Basic

    ERIC Educational Resources Information Center

    Spitler, Gail

    1978-01-01

    Presented is a paradigm for teaching basic and semibasic arithmetic facts to children with arithmetic difficulties, in which the student progresses from the use of concrete materials such as blocks, to the use of diagrams such as tally marks, to a reasoning process, to responding in an automatic manner. (DLS)

  12. Organic optical bistable switch

    NASA Astrophysics Data System (ADS)

    Xue, Jiangeng; Forrest, Stephen R.

    2003-01-01

    We demonstrate an organic optical bistable switch by integrating an efficient organic photodetector on top of a transparent electrophosphorescent organic light-emitting diode (TOLED). The bistability is achieved with an external field-effect transistor providing positive feedback. In the "LOW" state, the TOLED is off and the current in the photodetector is solely its dark current. In the "HIGH" state, the TOLED emits light that is directly coupled into the integrated photodetector through the transparent cathode. The photocurrent then is fed back to the TOLED, maintaining it in the HIGH state. The green electrophosphorescent material, fac tris(2-phenylpyridine) iridium [Ir(ppy)3] doped into a 4,4'-N,N'-dicarbazole-biphenyl host was used as the luminescent material in the TOLED, while alternating thin layers of copper phthalocyanine and 3,4,9,10-perylenetetracarboxylic bis-benzimidazole were used as the active region of the organic photodetector. The circuit has a 3 dB bandwidth of 25 kHz, and can be switched between HIGH and LOW using pulses as narrow as 60 ns. The bistable switch can be both electrically and optically reset, making it a candidate for image-retaining displays (e.g., electronic paper) and other photonic logic applications. The integrated organic device also has broad use as a linear circuit element in applications such as automatic brightness control.

  13. Cygnus Diverter Switch Analysis

    SciTech Connect

    G. Corrow, M. Hansen, D. Henderson, C. Mitton et al.

    2008-02-01

    The Cygnus Dual Beam Radiographic Facility consists of two 2.25-MV, 60-kA, 50-ns x-ray sources fielded in an underground laboratory at the Nevada Test Site. The tests performed in this laboratory involve study of the dynamic properties of plutonium and are called subcritical experiments. From end-to-end, the Cygnus machines utilize the following components: Marx generator, water-filled pulse-forming line (PFL), waterfilled coaxial transmission line (WTL), 3-cell inductive voltage adder (IVA), and rod-pinch diode. The upstream WTL interface to the PFL is via a radial insulator with coaxial geometry. The downstream WTL terminates in a manifold where the center conductor splits into three lines which individually connect to each of the IVA cell inputs. There is an impedance mismatch at this juncture. It is a concern that a reflected pulse due to anomalous behavior in the IVA or diode might initiate breakdown upon arrival at the upstream PFL/WTL insulator. Therefore near the beginning of the WTL a radial diverter switch is installed to protect the insulator from over voltage and breakdown. The diverter has adjustable gap spacing, and an in-line aqueous-solution (sodium thiosulfate) resistor array for energy dissipation. There are capacitive voltage probes at both ends of the WTL and on the diverter switch. These voltage signals will be analyzed to determine diverter performance. Using this analysis the usefulness of the diverter switch will be evaluated.

  14. "Platform switching": serendipity.

    PubMed

    Kalavathy, N; Sridevi, J; Gehlot, Roshni; Kumar, Santosh

    2014-01-01

    Implant dentistry is the latest developing field in terms of clinical techniques, research, material science and oral rehabilitation. Extensive work is being done to improve the designing of implants in order to achieve better esthetics and function. The main drawback with respect to implant restoration is achieving good osseointegration along with satisfactory stress distribution, which in turn will improve the prognosis of implant prosthesis by reducing the crestal bone loss. Many concepts have been developed with reference to surface coating of implants, surgical techniques for implant placement, immediate and delayed loading, platform switching concept, etc. This article has made an attempt to review the concept of platform switching was in fact revealed accidentally due to the nonavailability of the abutment appropriate to the size of the implant placed. A few aspect of platform switching, an upcoming idea to reduce crestal bone loss have been covered. The various methods used for locating and preparing the data were done through textbooks, Google search and related articles.

  15. Ferroelectric switching of elastin

    PubMed Central

    Liu, Yuanming; Cai, Hong-Ling; Zelisko, Matthew; Wang, Yunjie; Sun, Jinglan; Yan, Fei; Ma, Feiyue; Wang, Peiqi; Chen, Qian Nataly; Zheng, Hairong; Meng, Xiangjian; Sharma, Pradeep; Zhang, Yanhang; Li, Jiangyu

    2014-01-01

    Ferroelectricity has long been speculated to have important biological functions, although its very existence in biology has never been firmly established. Here, we present compelling evidence that elastin, the key ECM protein found in connective tissues, is ferroelectric, and we elucidate the molecular mechanism of its switching. Nanoscale piezoresponse force microscopy and macroscopic pyroelectric measurements both show that elastin retains ferroelectricity at 473 K, with polarization on the order of 1 μC/cm2, whereas coarse-grained molecular dynamics simulations predict similar polarization with a Curie temperature of 580 K, which is higher than most synthetic molecular ferroelectrics. The polarization of elastin is found to be intrinsic in tropoelastin at the monomer level, analogous to the unit cell level polarization in classical perovskite ferroelectrics, and it switches via thermally activated cooperative rotation of dipoles. Our study sheds light onto a long-standing question on ferroelectric switching in biology and establishes ferroelectricity as an important biophysical property of proteins. This is a critical first step toward resolving its physiological significance and pathological implications. PMID:24958890

  16. 7×7 DMD-based diffractive fiber switch at 1550 nm

    NASA Astrophysics Data System (ADS)

    Miles, A.; Lynn, B.; Blanche, P.-A.; Wissinger, J.; Carothers, D.; LaComb, L.; Norwood, R. A.; Peyghambarian, N.

    2015-01-01

    We have implemented and tested a free-space diffraction-based non-blocking 7×7 switch built primarily using off-the-shelf components and a commercially available digital micro-mirror device (DMD). This DMD is capable of switching 100 times faster than currently available technologies. The switch is protocol and bit-rate agnostic, robust against random mirror failure, and provides the basic building block for a fully reconfigurable optical add drop multiplexer (ROADM). Our design offers the potential to address the growing need for high speed scalable circuit switching for data centers and optical networks.

  17. The Basic Principles of Networking.

    ERIC Educational Resources Information Center

    Charp, Sylvia; Hines, I. J.

    1988-01-01

    Discussed are the factors to be considered when establishing a computer network. Considered are telecommunications, in general, along with channels, switching, packet switching, transmission, multiplexing, and local area networks (LANS). (TW)

  18. Climate Change: Basic Information

    MedlinePlus

    ... EPA United States Environmental Protection Agency Search Search Climate Change Share Facebook Twitter Google+ Pinterest Contact Us Climate Change: Basic Information On This Page Climate change is ...

  19. Synchronized switch harvesting applied to piezoelectric flags

    NASA Astrophysics Data System (ADS)

    Piñeirua, Miguel; Michelin, Sébastien; Vasic, Dejan; Doaré, Olivier

    2016-08-01

    In this article the energy transfer between a flow and a fluttering piezoelectric plate is investigated. In particular, the benefits of the use of a synchronized switch harvesting on inductor (SSHI) circuit are studied. Both wind tunnel experiments and numerical simulations are conducted in order to analyze the influence of the switching process on the dynamics and the efficiency of the system. Numerical simulations consist of a weakly nonlinear model of a plate in axial flow equipped with a single pair of piezoelectric patches, discretized using a Galerkin method where basis functions are the modes of the plate in vacuum. The discretized model is then integrated in time. The results presented in this paper show that a significant improvement of the harvested energy can be obtained using SSHI circuits compared to basic resistive circuits. It is also shown that for strongly coupled systems, the switching process inherent to he SSHI circuit has a significant impact on the dynamics of the flag, which tends to decrease the relative efficiency gain.

  20. Photoconductive semiconductor switches: Laser Q-switch trigger and switch-trigger laser integration

    SciTech Connect

    Loubriel, G.M.; Mar, A.; Hamil, R.A.; Zutavern, F.J.; Helgeson, W.D.

    1997-12-01

    This report provides a summary of the Pulser In a Chip 9000-Discretionary LDRD. The program began in January of 1997 and concluded in September of 1997. The over-arching goal of this LDRD is to study whether laser diode triggered photoconductive semiconductor switches (PCSS) can be used to activate electro-optic devices such as Q-switches and Pockels cells and to study possible laser diode/switch integration. The PCSS switches we used were high gain GaAs switches because they can be triggered with small amounts of laser light. The specific goals of the LDRD were to demonstrate: (1) that small laser diode arrays that are potential candidates for laser-switch integration will indeed trigger the PCSS switch, and (2) that high gain GaAs switches can be used to trigger optical Q-switches in lasers such as the lasers to be used in the X-1 Advanced Radiation Source and the laser used for direct optical initiation (DOI) of explosives. The technology developed with this LDRD is now the prime candidate for triggering the Q switch in the multiple lasers in the laser trigger system of the X-1 Advanced Radiation Source and may be utilized in other accelerators. As part of the LDRD we developed a commercial supplier. To study laser/switch integration we tested triggering the high gain GaAs switches with: edge emitting laser diodes, vertical cavity surface emitting lasers (VCSELs), and transverse junction stripe (TJS) lasers. The first two types of lasers (edge emitting and VCSELs) did activate the PCSS but are harder to integrate with the PCSS for a compact package. The US lasers, while easier to integrate with the switch, did not trigger the PCSS at the US laser power levels we used. The PCSS was used to activate the Q-switch of the compact laser to be used in the X-1 Advanced Radiation Source.

  1. Scaling experiments on a magnetically insulated thermionic vacuum switch

    SciTech Connect

    Eninger, J.E.; Vanderberg, B.H.

    1994-12-31

    Magnetic insulation of the electron flow in a cylindrical thermionic vacuum diode has been proposed as a way to achieve a fast high-voltage high-power opening switch. The expected performance of this type of device can be derived from a set of basic scaling laws combined with empirical relationships obtained from experimental studies. Switch losses are mainly due to anode dissipation W{sub a}, which can be normalized to the transferred pulse energy. Leakage current and switch hold-off voltage depend on device geometry, materials, vacuum conditions etc and must be determined experimentally. For this purpose, the MX-1 experiment has been designed and operated. This device is basically a smooth-bore cylindrical magnetron with a 5 cm radius, 400 cm{sup 2} area thermionic dispenser cathode separated from the coaxial water-cooled anode by a few mm wide gap. This design allows pulsed operation at up to {approximately}100 kV, {approximately}4 kA and average power levels of {approximately}1 MW. The MX-1 switch is used as an opening switch to produce 1--2 {mu}s long square pulses from an inductive storage PFN. The current-voltage characteristics of the switch are determined as a function of the applied magnetic field and load condition. Plasma wave measurements are performed to investigate the stability of the electron flow. Results are summarized in the form of scaling diagrams for the important switch parameters, showing possible performance levels and physical and technical limitations identified as far in this work.

  2. Romanian Basic Course.

    ERIC Educational Resources Information Center

    Defense Language Inst., Washington, DC.

    The "Romanian Basic Course," consisting of 89 lesson units in eight volumes, is designed to train native English language speakers to Level 3 proficiency in comprehension, speaking, reading, and writing Romanian (based on a 1-5 scale in which Level 5 is native speaker proficiency). Volume 1, which introduces basic sentences in dialog form with…

  3. BASIC Beats PASCAL.

    ERIC Educational Resources Information Center

    Ever, Jacob

    1981-01-01

    Features of two versions of the BASIC programing language are compared with the features of the PASCAL programing language. The application chosen for comparison was a word processor. The conclusion was that PASCAL had the best language features, but BASIC had better systems capabilities. (MP)

  4. Basic Science Training Program.

    ERIC Educational Resources Information Center

    Brummel, Clete

    These six learning modules were developed for Lake Michigan College's Basic Science Training Program, a workshop to develop good study skills while reviewing basic science. The first module, which was designed to provide students with the necessary skills to study efficiently, covers the following topics: time management; an overview of a study…

  5. Fluency with Basic Addition

    ERIC Educational Resources Information Center

    Garza-Kling, Gina

    2011-01-01

    Traditionally, learning basic facts has focused on rote memorization of isolated facts, typically through the use of flash cards, repeated drilling, and timed testing. However, as many experienced teachers have seen, "drill alone does not develop mastery of single-digit combinations." In contrast, a fluency approach to learning basic addition…

  6. TOOLS AND BASIC MACHINES.

    ERIC Educational Resources Information Center

    George Washington Univ., Washington, DC. School of Education.

    THIS BASIC READER IS A PART OF AN EXPERIMENTAL CURRICULUM DEVELOPMENT PROJECT DESCRIBED IN VT 004 454, TO DEVELOP AND EVALUATE SPECIAL NEW TRAINING MATERIALS TO TEACH BASIC VOCATIONAL TALENT SKILLS TO DISADVANTAGED STUDENTS WHICH WERE TESTED ON APPROXIMATELY 2,500 EIGHTH AND NINTH GRADERS IN EIGHT SCHOOL SYSTEMS ACROSS THE NATION. THIS READER WAS…

  7. Basic Electronics I.

    ERIC Educational Resources Information Center

    Robertson, L. Paul

    Designed for use in basic electronics programs, this curriculum guide is comprised of twenty-nine units of instruction in five major content areas: Orientation, Basic Principles of Electricity/Electronics, Fundamentals of Direct Current, Fundamentals of Alternating Current, and Applying for a Job. Each instructional unit includes some or all of…

  8. Construction & Basic Skills.

    ERIC Educational Resources Information Center

    BCEL Newsletter for the Business and Literacy Communities, 1991

    1991-01-01

    Basic skills education has become a pressing need in the construction industry as jobs become more complex and fewer workers have needed skills. However, the construction industry lags in spending on training for entry-level workers. The Home Builders Institute (HBI) is testing a pilot basic skills program that it hopes will prove useful to the…

  9. Basic Science Training Program.

    ERIC Educational Resources Information Center

    Brummel, Clete

    These six learning modules were developed for Lake Michigan College's Basic Science Training Program, a workshop to develop good study skills while reviewing basic science. The first module, which was designed to provide students with the necessary skills to study efficiently, covers the following topics: time management; an overview of a study…

  10. Exponentiation: A New Basic?

    ERIC Educational Resources Information Center

    Davis, Brent

    2015-01-01

    For centuries, the basic operations of school mathematics have been identified as addition, subtraction, multiplication, and division. Notably, these operations are "basic," not because they are foundational to mathematics knowledge, but because they were vital to a newly industrialized and market-driven economy several hundred years…

  11. Fluency with Basic Addition

    ERIC Educational Resources Information Center

    Garza-Kling, Gina

    2011-01-01

    Traditionally, learning basic facts has focused on rote memorization of isolated facts, typically through the use of flash cards, repeated drilling, and timed testing. However, as many experienced teachers have seen, "drill alone does not develop mastery of single-digit combinations." In contrast, a fluency approach to learning basic addition…

  12. Exponentiation: A New Basic?

    ERIC Educational Resources Information Center

    Davis, Brent

    2015-01-01

    For centuries, the basic operations of school mathematics have been identified as addition, subtraction, multiplication, and division. Notably, these operations are "basic," not because they are foundational to mathematics knowledge, but because they were vital to a newly industrialized and market-driven economy several hundred years…

  13. Electromechanical resistive switching via back-to-back Schottky junctions

    SciTech Connect

    Li, Lijie

    2015-09-15

    The physics of the electromechanical resistive switching is uncovered using the theory of back-to-back Schottky junctions combined with the quantum domain space charge transport. A theoretical model of the basic element of resistive switching devices realized by the metal-ZnO nanowires-metal structure has been created and analyzed. Simulation results show that the reverse biased Schottky junction and the air gap impedance dominate the current-voltage relation at higher external voltages; thereby electromechanically varying the air gap thickness causes the device exhibit resistive tuning characteristics. As the device dimension is in nanometre scale, investigation of the model based on quantum mechanics has also been conducted.

  14. Crossbar Switches For Optical Data-Communication Networks

    NASA Technical Reports Server (NTRS)

    Monacos, Steve P.

    1994-01-01

    Optoelectronic and electro-optical crossbar switches called "permutation engines" (PE's) developed to route packets of data through fiber-optic communication networks. Basic network concept described in "High-Speed Optical Wide-Area Data-Communication Network" (NPO-18983). Nonblocking operation achieved by decentralized switching and control scheme. Each packet routed up or down in each column of this 5-input/5-output permutation engine. Routing algorithm ensures each packet arrives at its designated output port without blocking any other packet that does not contend for same output port.

  15. The 4X6 network: A new power switching scheme

    SciTech Connect

    Page, R.; Nishikawara, K.; Stromotich, F. )

    1989-10-01

    This paper describes a new power delivery switching concept which is patented in the USA and Canada. The basic network has 4 nodes and 6 branches and so is called a 4 x 6 switching network. For larger substations, it has substantial advantages over the traditional double breaker, breaker and one-half, and breaker and one-third: up to 40% fewer breakers; higher reliability; and reduced station area in some cases. For some applications, it can provide lower short-circuit levels and bus ampacity ratings thorugh the judicious use of normally open circuit breakers. The concept is applicable to all types of conventional switchgear including SF6.

  16. Crossbar Switches For Optical Data-Communication Networks

    NASA Technical Reports Server (NTRS)

    Monacos, Steve P.

    1994-01-01

    Optoelectronic and electro-optical crossbar switches called "permutation engines" (PE's) developed to route packets of data through fiber-optic communication networks. Basic network concept described in "High-Speed Optical Wide-Area Data-Communication Network" (NPO-18983). Nonblocking operation achieved by decentralized switching and control scheme. Each packet routed up or down in each column of this 5-input/5-output permutation engine. Routing algorithm ensures each packet arrives at its designated output port without blocking any other packet that does not contend for same output port.

  17. Electromechanical resistive switching via back-to-back Schottky junctions

    NASA Astrophysics Data System (ADS)

    Li, Lijie

    2015-09-01

    The physics of the electromechanical resistive switching is uncovered using the theory of back-to-back Schottky junctions combined with the quantum domain space charge transport. A theoretical model of the basic element of resistive switching devices realized by the metal-ZnO nanowires-metal structure has been created and analyzed. Simulation results show that the reverse biased Schottky junction and the air gap impedance dominate the current-voltage relation at higher external voltages; thereby electromechanically varying the air gap thickness causes the device exhibit resistive tuning characteristics. As the device dimension is in nanometre scale, investigation of the model based on quantum mechanics has also been conducted.

  18. Power transistor switching characterization

    NASA Technical Reports Server (NTRS)

    Blackburn, D. L.

    1981-01-01

    The switching properties of power transistors are investigated. The devices studied were housed in IO-3 cases and were of an n(+)-p-n(-)-n(+) vertical dopant structure. The effects of the magnitude of the reverse-base current and temperature on the reverse-bias second breakdown characteristics are discussed. Brief discussions of device degradation due to second breakdown and of a constant voltage turn-off circuit are included. A description of a vacuum tube voltage clamp circuit which reduces clamped collector voltage overshoot is given.

  19. Composite Thermal Switch

    NASA Technical Reports Server (NTRS)

    McDonald, Robert; Brawn, Shelly; Harrison, Katherine; O'Toole, Shannon; Moeller, Michael

    2011-01-01

    Lithium primary and lithium ion secondary batteries provide high specific energy and energy density. The use of these batteries also helps to reduce launch weight. Both primary and secondary cells can be packaged as high-rate cells, which can present a threat to crew and equipment in the event of external or internal short circuits. Overheating of the cell interior from high current flows induced by short circuits can result in exothermic reactions in lithium primary cells and fully charged lithium ion secondary cells. Venting of the cell case, ejection of cell components, and fire have been reported in both types of cells, resulting from abuse, cell imperfections, or faulty electronic control design. A switch has been developed that consists of a thin layer of composite material made from nanoscale particles of nickel and Teflon that conducts electrons at room temperature and switches to an insulator at an elevated temperature, thus interrupting current flow to prevent thermal runaway caused by internal short circuits. The material is placed within the cell, as a thin layer incorporated within the anode and/or the cathode, to control excess currents from metal-to-metal or metal-to-carbon shorts that might result from cell crush or a manufacturing defect. The safety of high-rate cells is thus improved, preventing serious injury to personnel and sensitive equipment located near the battery. The use of recently available nanoscale particles of nickel and Teflon permits an improved, homogeneous material with the potential to be fine-tuned to a unique switch temperature, sufficiently below the onset of a catastrophic chemical reaction. The smaller particles also permit the formation of a thinner control film layer (<50 m), which can be incorporated into commercial high-rate lithium primary and secondary cells. The innovation permits incorporation in current lithium and lithium-ion cell designs with a minimal impact on cell weight and volume. The composite thermal

  20. Distributed circuit switching starnet

    SciTech Connect

    Chuan-lin Wu; Woei Lin; Min-chang Lin

    1982-01-01

    Starnet is a communication subnet which can cost-effectively connect hundreds or thousands of processors for distributed processing. It uses distributed control and circuit switching. Starnet's communication medium includes two major components: a multistage interconnection network and a set of interface units. The interconnection network uses a destination routing scheme with no central control. The interface unit provides handshaking between the computer/data node and the interconnection network under the control of a microprocessor. Detailed design of the communication medium is described. A model for comparing cost-effectiveness among starnet, crossbar and multiple buses is included. 7 references.

  1. Neutron activated switch

    DOEpatents

    Barton, David M.

    1991-01-01

    A switch for reacting quickly to a neutron emission. A rod consisting of fissionable material is located inside a vacuum tight body. An adjustable contact is located coaxially at an adjustable distance from one end of the rod. Electrical leads are connected to the rod and to the adjustable contact. With a vacuum drawn inside the body, a neutron bombardment striking the rod causes it to heat and expand longitudinally until it comes into contact with the adjustable contact. This circuit closing occurs within a period of a few microseconds.

  2. Railway switch transport model.

    PubMed

    Horvat, Martin; Prosen, Tomaž; Benenti, Giuliano; Casati, Giulio

    2012-11-01

    We propose a simple model of coupled heat and particle transport based on zero-dimensional classical deterministic dynamics, which is reminiscent of a railway switch whose action is a function only of the particle's energy. It is shown that already in the minimal three-terminal model, where the second terminal is considered as a probe with zero net particle and heat currents, one can find extremely asymmetric Onsager matrices as a consequence of time-reversal symmetry breaking of the model. This minimalistic transport model provides a better understanding of thermoelectric heat engines in the presence of time-reversal symmetry breaking.

  3. BASIC: Updating a Familiar Language.

    ERIC Educational Resources Information Center

    Eyman, David H.

    1988-01-01

    Discusses reasons for learning to program in BASIC, various versions of BASIC, BASIC compilers, and adherence to proposed standards. Brief reviews of six BASIC software packages are included. (12 references) (MES)

  4. Compound semiconductor optical waveguide switch

    DOEpatents

    Spahn, Olga B.; Sullivan, Charles T.; Garcia, Ernest J.

    2003-06-10

    An optical waveguide switch is disclosed which is formed from III-V compound semiconductors and which has a moveable optical waveguide with a cantilevered portion that can be bent laterally by an integral electrostatic actuator to route an optical signal (i.e. light) between the moveable optical waveguide and one of a plurality of fixed optical waveguides. A plurality of optical waveguide switches can be formed on a common substrate and interconnected to form an optical switching network.

  5. Wide Bandgap Extrinsic Photoconductive Switches

    DTIC Science & Technology

    2007-06-01

    above band-gap wavelengths of light to trigger the switches. The performance and switch life of lateral geometry PCSS are limited by surface flashover ...Laboratory Livermore, CA 94550 Abstract Semi-insulating Silicon Carbide and Gallium Nitride are attractive materials for compact, high voltage...Introduction Previous SiC PCSS work [2-4] used high resistivity, low impurity SiC polytypes and focused on lateral geometry surface switches that used

  6. Optical switch based on thermocapillarity

    NASA Astrophysics Data System (ADS)

    Sakata, Tomomi; Makihara, Mitsuhiro; Togo, Hiroyoshi; Shimokawa, Fusao; Kaneko, Kazumasa

    2001-11-01

    Space-division optical switches are essential for the protection, optical cross-connects (OXCs), and optical add/drop multiplexers (OADMs) needed in future fiber-optic communication networks. For applications in these areas, we proposed a thermocapillarity switch called oil-latching interfacial-tension variation effect (OLIVE) switch. An OLIVE switch is a micro-mechanical optical switch fabricated on planar lightwave circuits (PLC) using micro-electro-mechanical systems (MEMS) technology. It consists of a crossing waveguide that has a groove at each crossing point and a pair of microheaters. The groove is partially filled with the refractive-index-matching liquid, and optical signals are switched according to the liquid's position in the groove, i.e., whether it is passing straight through the groove or reflecting at the sidewall of the groove. The liquid is driven by thermocapillarity and latched by capillarity. Using the total internal reflection to switch the optical path, the OLIVE switch exhibits excellent optical characteristics, such as high transparency (insertion loss: < 2 dB), high extinction ratio (> 50 dB), and low crosstalk (< -50 dB). Moreover, since this switch has a simple structure and bi-stability, it has wide variety of applications in wavelength division multiplexing (WDM) networks.

  7. Data center coolant switch

    DOEpatents

    Iyengar, Madhusudan K.; Parida, Pritish R.; Schultz, Mark D.

    2015-10-06

    A data center cooling system is operated in a first mode; it has an indoor portion wherein heat is absorbed from components in the data center, and an outdoor heat exchanger portion wherein outside air is used to cool a first heat transfer fluid (e.g., water) present in at least the outdoor heat exchanger portion of the cooling system during the first mode. The first heat transfer fluid is a relatively high performance heat transfer fluid (as compared to the second fluid), and has a first heat transfer fluid freezing point. A determination is made that an appropriate time has been reached to switch from the first mode to a second mode. Based on this determination, the outdoor heat exchanger portion of the data cooling system is switched to a second heat transfer fluid, which is a relatively low performance heat transfer fluid, as compared to the first heat transfer fluid. It has a second heat transfer fluid freezing point lower than the first heat transfer fluid freezing point, and the second heat transfer fluid freezing point is sufficiently low to operate without freezing when the outdoor air temperature drops below a first predetermined relationship with the first heat transfer fluid freezing point.

  8. Task switching: effects of practice on switch and mixing costs.

    PubMed

    Strobach, Tilo; Liepelt, Roman; Schubert, Torsten; Kiesel, Andrea

    2012-01-01

    In the task-switching paradigm, mixing costs indicate the performance costs to mix two different tasks, while switch costs indicate the performance costs to switch between two sequentially presented tasks. Applying tasks with bivalent stimuli and responses, many studies demonstrated substantial mixing and switch costs and a reduction of these costs as a result of practice. The present study investigates whether extensive practice of a task-switching situation including tasks with univalent stimuli eliminates these costs. Participants practiced switching between a visual and an auditory task. These tasks were chosen because they had shown eliminated performance costs in a comparable dual-task practice study (Schumacher et al. Psychol Sci 12:101-108, 2001). Participants either performed the tasks with univalent responses (i.e., visual-manual and auditory-verbal stimulus-response mappings) or bivalent responses (i.e., visual-manual and auditory-manual stimulus-response mappings). Both valence conditions revealed substantial mixing and switch costs at the beginning of practice, yet, mixing costs were largely eliminated after eight practice sessions while switch costs were still existent.

  9. Phasic alertness and residual switch costs in task switching.

    PubMed

    Schneider, Darryl W

    2017-02-01

    Residual switch costs are deficits in task-switching performance that occur despite considerable time to prepare for a task switch. In the present study, the author investigated whether increased phasic alertness modulates residual switch costs. In 2 experiments involving the task-cuing procedure, subjects performed numerical categorization tasks on target digits, with and without an alerting stimulus presented shortly before the target (alert and no-alert trials, respectively). Switch costs were obtained that decreased with a longer cue-target interval, indicating subjects engaged in preparation, but large residual switch costs remained. Alerting effects were obtained in the form of faster overall performance on alert than on no-alert trials, indicating the alerting stimuli increased phasic alertness. Critically, residual switch costs were similar on alert and no-alert trials in both experiments, unaffected by manipulations of alert type, alert availability, and alert-target interval. Implications of the results for understanding the relationship between phasic alertness and cognitive control in task switching are discussed. (PsycINFO Database Record

  10. Tuning the temperature dependence for switching in dithienylethene photochromic switches.

    PubMed

    Kudernac, Tibor; Kobayashi, Takao; Uyama, Ayaka; Uchida, Kingo; Nakamura, Shinichiro; Feringa, Ben L

    2013-08-29

    Diarylethene photochromic switches use light to drive structural changes through reversible electrocyclization reactions. High efficiency in dynamic photoswitching is a prerequisite for applications, as is thermal stability and the selective addressability of both isomers ring-opened and -closed diarylethenes. These properties can be optimized readily through rational variation in molecular structure. The efficiency with regard to switching as a function of structural variation is much less understood, with the exception of geometric requirements placed on the reacting atoms. Ultimately, increasing the quantum efficiency of photochemical switching in diarylethenes requires a detailed understanding of the excited-state potential energy surface(s) and the mechanisms involved in switching. Through studies of the temperature dependence, photoswitching and theoretical studies demonstrate the occurrence or absence of thermal activation barriers in three constitutional isomers that bear distinct π-conjugated systems. We found that a decrease in the thermal barriers correlates with an increase in switching efficiency. The origin of the barriers is assigned to the decrease in π-conjugation that is concomitant with the progress of the photoreaction. Furthermore, we show that balanced molecular design can minimize the change in the extent of π-conjugation during switching and lead to optimal bidirectional switching efficiencies. Our findings hold implications for future structural design of diarylethene photochromic switches.

  11. A continuous switching model for piezoelectric state switching methods

    NASA Astrophysics Data System (ADS)

    Lopp, Garrett K.; Kauffman, Jeffrey L.

    2017-04-01

    Piezoelectric-based, semi-active vibration reduction approaches have been studied for over a decade due to their potential in controlling vibration over a large frequency range. Previous studies have relied on a discrete model when switching between the stiffness states of the system. In such a modeling approach, the energy dissipation of the stored potential energy and the transient dynamics, in general, are not well understood. In this paper, a switching model is presented using a variable capacitance in the attached shunt circuit. When the switch duration is small in comparison to the period of vibration, the vibration reduction performance approaches that of the discrete model with an instantaneous switch, whereas longer switch durations lead to less vibration reduction. An energy analysis is then performed that results in the appearance of an energy dissipation term due to the varying capacitance in the shunt circuit.

  12. HIV Treatment: The Basics

    MedlinePlus

    HIV Treatment HIV Treatment: The Basics (Last updated 2/24/2017; last reviewed 2/24/2017) Key Points Antiretroviral therapy (ART) ... reduces the risk of HIV transmission . How do HIV medicines work? HIV attacks and destroys the infection- ...

  13. Opioid Basics: Fentanyl

    MedlinePlus

    ... Basics Understanding the Epidemic Overdose Prevention Prescription Opioids Heroin Fentanyl Data Opioid Data Analysis Drug Overdose Death Data Prescribing Data Prescription Opioid Overdose Data Heroin Overdose Data Synthetic Opioid Data Fentanyl Encounters Data ...

  14. Video Screen Capture Basics

    ERIC Educational Resources Information Center

    Dunbar, Laura

    2014-01-01

    This article is an introduction to video screen capture. Basic information of two software programs, QuickTime for Mac and BlueBerry Flashback Express for PC, are also discussed. Practical applications for video screen capture are given.

  15. Video Screen Capture Basics

    ERIC Educational Resources Information Center

    Dunbar, Laura

    2014-01-01

    This article is an introduction to video screen capture. Basic information of two software programs, QuickTime for Mac and BlueBerry Flashback Express for PC, are also discussed. Practical applications for video screen capture are given.

  16. Vaccine Basics (Smallpox)

    MedlinePlus

    ... Smallpox Website NIH Smallpox Research CDC Poxvirus and Rabies Branch Poxvirus Diseases Vaccine Basics Recommend on Facebook ... Smallpox Website NIH Smallpox Research CDC Poxvirus and Rabies Branch Poxvirus Diseases File Formats Help: How do ...

  17. Brain Basics: Understanding Sleep

    MedlinePlus

    ... Home » Disorders » Patient & Caregiver Education Brain Basics: Understanding Sleep Do you ever feel sleepy or "zone out" ... The Future Tips for a Good Night's Sleep Sleep: A Dynamic Activity Until the 1950s, most people ...

  18. The Basics of Braces

    MedlinePlus

    ... Guide to Getting Involved Teaching Kids to Be Smart About Social Media The Basics of Braces KidsHealth > ... child's teeth by pressing a tray of gooey material into the top and bottom teeth. When the ...

  19. Health Literacy Basics

    MedlinePlus

    ... to which individuals have the capacity to obtain, process, and understand basic health information and services needed to make appropriate health decisions. 1 Health literacy is dependent on individual and ...

  20. Basics of Weight Control

    MedlinePlus

    ... energy and nutrients. The basic required nutrients are water, carbohydrates, proteins, fats, dietary fibers, vitamins, and minerals. Carbohydrates, proteins, and fats provide energy in the form of calories. Alcohol (beer, wine, ...

  1. Basics of Weight Control

    MedlinePlus

    ... energy and nutrients. The basic required nutrients are water, carbohydrates, proteins, fats, dietary fibers, vitamins, and minerals. Carbohydrates, proteins, and fats provide energy in the form of calories. Alcohol (beer, wine, ...

  2. Getting back to basics.

    PubMed

    Maricich, Stephen M; Zoghbi, Huda Y

    2006-07-14

    Advances in understanding basic developmental and physiological processes often have direct relevance to human disease. They provide insights into pathogenic mechanisms and reveal new pathways that can be exploited in diagnosis and the development of therapeutics.

  3. Hybrid switch for resonant power converters

    DOEpatents

    Lai, Jih-Sheng; Yu, Wensong

    2014-09-09

    A hybrid switch comprising two semiconductor switches connected in parallel but having different voltage drop characteristics as a function of current facilitates attainment of zero voltage switching and reduces conduction losses to complement reduction of switching losses achieved through zero voltage switching in power converters such as high-current inverters.

  4. 14 CFR 27.1145 - Ignition switches.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Ignition switches. 27.1145 Section 27.1145... switches. (a) There must be means to quickly shut off all ignition by the grouping of switches or by a master ignition control. (b) Each group of ignition switches, except ignition switches for...

  5. 14 CFR 27.1145 - Ignition switches.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Ignition switches. 27.1145 Section 27.1145... switches. (a) There must be means to quickly shut off all ignition by the grouping of switches or by a master ignition control. (b) Each group of ignition switches, except ignition switches for...

  6. 14 CFR 23.1145 - Ignition switches.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Ignition switches. 23.1145 Section 23.1145... Accessories § 23.1145 Ignition switches. (a) Ignition switches must control and shut off each ignition circuit... the grouping of switches or by a master ignition control. (c) Each group of ignition switches,...

  7. 14 CFR 23.1145 - Ignition switches.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Ignition switches. 23.1145 Section 23.1145... Accessories § 23.1145 Ignition switches. (a) Ignition switches must control and shut off each ignition circuit... the grouping of switches or by a master ignition control. (c) Each group of ignition switches,...

  8. 14 CFR 27.1145 - Ignition switches.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Ignition switches. 27.1145 Section 27.1145... switches. (a) There must be means to quickly shut off all ignition by the grouping of switches or by a master ignition control. (b) Each group of ignition switches, except ignition switches for...

  9. 14 CFR 23.1145 - Ignition switches.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Ignition switches. 23.1145 Section 23.1145... Accessories § 23.1145 Ignition switches. (a) Ignition switches must control and shut off each ignition circuit... the grouping of switches or by a master ignition control. (c) Each group of ignition switches,...

  10. 14 CFR 27.1145 - Ignition switches.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Ignition switches. 27.1145 Section 27.1145... switches. (a) There must be means to quickly shut off all ignition by the grouping of switches or by a master ignition control. (b) Each group of ignition switches, except ignition switches for...

  11. 14 CFR 23.1145 - Ignition switches.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Ignition switches. 23.1145 Section 23.1145... Accessories § 23.1145 Ignition switches. (a) Ignition switches must control and shut off each ignition circuit... the grouping of switches or by a master ignition control. (c) Each group of ignition switches,...

  12. 14 CFR 23.1145 - Ignition switches.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Ignition switches. 23.1145 Section 23.1145... Accessories § 23.1145 Ignition switches. (a) Ignition switches must control and shut off each ignition circuit... the grouping of switches or by a master ignition control. (c) Each group of ignition switches,...

  13. 14 CFR 27.1145 - Ignition switches.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Ignition switches. 27.1145 Section 27.1145... switches. (a) There must be means to quickly shut off all ignition by the grouping of switches or by a master ignition control. (b) Each group of ignition switches, except ignition switches for...

  14. Switching languages, switching palabras (words): an electrophysiological study of code switching.

    PubMed

    Moreno, Eva M; Federmeier, Kara D; Kutas, Marta

    2002-02-01

    Switching languages has often been associated with a processing cost. In this study, the authors used event-related potentials to compare switches between two languages with within-language lexical switches as bilinguals read for comprehension. Stimuli included English sentences and idioms ending either with the expected English words, their Spanish translations (code switches), or English synonyms (lexical switches). As expected, lexical switches specifically enhanced the N400 response in both context types. Code switches, by contrast, elicited an increased negativity over left fronto-central sites in the regular nonidiomatic sentences (250-450 ms) and a large posterior positivity (450-850 ms) in both context types. In addition, both lexical and code switches elicited a late frontal positivity (650-850 ms) relative to expected completions, especially in idioms. Analysis of the individual response patterns showed correlations with vocabulary skills in English and in Spanish. Overall, the electrophysiological data suggest that for some speakers in some contexts, the processing of a code switch may actually be less costly than the processing of an unexpected within-language item.

  15. Are there basic emotions?

    PubMed

    Ekman, P

    1992-07-01

    Ortony and Turner's (1990) arguments against those who adopt the view that there are basic emotions are challenged. The evidence on universals in expression and in physiology strongly suggests that there is a biological basis to the emotions that have been studied. Ortony and Turner's reviews of this literature are faulted, and their alternative theoretical explanations do not fit the evidence. The utility of the basic emotions approach is also shown in terms of the research it has generated.

  16. Phenotypic switching in bacteria

    NASA Astrophysics Data System (ADS)

    Merrin, Jack

    Living matter is a non-equilibrium system in which many components work in parallel to perpetuate themselves through a fluctuating environment. Physiological states or functionalities revealed by a particular environment are called phenotypes. Transitions between phenotypes may occur either spontaneously or via interaction with the environment. Even in the same environment, genetically identical bacteria can exhibit different phenotypes of a continuous or discrete nature. In this thesis, we pursued three lines of investigation into discrete phenotypic heterogeneity in bacterial populations: the quantitative characterization of the so-called bacterial persistence, a theoretical model of phenotypic switching based on those measurements, and the design of artificial genetic networks which implement this model. Persistence is the phenotype of a subpopulation of bacteria with a reduced sensitivity to antibiotics. We developed a microfluidic apparatus, which allowed us to monitor the growth rates of individual cells while applying repeated cycles of antibiotic treatments. We were able to identify distinct phenotypes (normal and persistent) and characterize the stochastic transitions between them. We also found that phenotypic heterogeneity was present prior to any environmental cue such as antibiotic exposure. Motivated by the experiments with persisters, we formulated a theoretical model describing the dynamic behavior of several discrete phenotypes in a periodically varying environment. This theoretical framework allowed us to quantitatively predict the fitness of dynamic populations and to compare survival strategies according to environmental time-symmetries. These calculations suggested that persistence is a strategy used by bacterial populations to adapt to fluctuating environments. Knowledge of the phenotypic transition rates for persistence may provide statistical information about the typical environments of bacteria. We also describe a design of artificial

  17. EDITORIAL: Molecular switches at surfaces Molecular switches at surfaces

    NASA Astrophysics Data System (ADS)

    Weinelt, Martin; von Oppen, Felix

    2012-10-01

    In nature, molecules exploit interaction with their environment to realize complex functionalities on the nanometer length scale. Physical, chemical and/or biological specificity is frequently achieved by the switching of molecules between microscopically different states. Paradigmatic examples are the energy production in proton pumps of bacteria or the signal conversion in human vision, which rely on switching molecules between different configurations or conformations by external stimuli. The remarkable reproducibility and unparalleled fatigue resistance of these natural processes makes it highly desirable to emulate nature and develop artificial systems with molecular functionalities. A promising avenue towards this goal is to anchor the molecular switches at surfaces, offering new pathways to control their functional properties, to apply electrical contacts, or to integrate switches into larger systems. Anchoring at surfaces allows one to access the full range from individual molecular switches to self-assembled monolayers of well-defined geometry and to customize the coupling between molecules and substrate or between adsorbed molecules. Progress in this field requires both synthesis and preparation of appropriate molecular systems and control over suitable external stimuli, such as light, heat, or electrical currents. To optimize switching and generate function, it is essential to unravel the geometric structure, the electronic properties and the dynamic interactions of the molecular switches on surfaces. This special section, Molecular Switches at Surfaces, collects 17 contributions describing different aspects of this research field. They analyze elementary processes, both in single molecules and in ensembles of molecules, which involve molecular switching and concomitant changes of optical, electronic, or magnetic properties. Two topical reviews summarize the current status, including both challenges and achievements in the field of molecular switches on

  18. Study of optoelectronic switch for satellite-switched time-division multiple access

    NASA Technical Reports Server (NTRS)

    Su, Shing-Fong; Jou, Liz; Lenart, Joe

    1987-01-01

    The use of optoelectronic switching for satellite switched time division multiple access will improve the isolation and reduce the crosstalk of an IF switch matrix. The results are presented of a study on optoelectronic switching. Tasks include literature search, system requirements study, candidate switching architecture analysis, and switch model optimization. The results show that the power divided and crossbar switching architectures are good candidates for an IF switch matrix.

  19. Switch energies of electronic and optical switches: A simple comparative study

    SciTech Connect

    Thylen, L.; Palm, T. . Lab. of Photonics and Microwave Engineering)

    1994-05-01

    A comparison of the switch energies of electrically controlled optical absorption switches and electronic switches is performed. It is shown that in the investigated case with quantum box based absorption switches, the switch energies of the optical switches are generally orders of magnitude larger than those of the electronic switches for very high frequencies. Consequences on integration of optical devices as well as on the potential for photonic switching and processing are briefly discussed.

  20. Battery switch for downhole tools

    DOEpatents

    Boling, Brian E.

    2010-02-23

    An electrical circuit for a downhole tool may include a battery, a load electrically connected to the battery, and at least one switch electrically connected in series with the battery and to the load. The at least one switch may be configured to close when a tool temperature exceeds a selected temperature.

  1. Megavolt, Multigigawatt Pulsed Plasma Switch

    NASA Technical Reports Server (NTRS)

    Lee, Ja H.; Choi, Sang H.; Song, Kyo D.

    1996-01-01

    Plasma switch proposed for use in high-voltage, high-current pulse power system. Designed not only to out-perform conventional spark-gap switch but also relatively compact and lightweight. Features inverse-pinch configuration to prevent constriction of current sheets into filaments, plus multiple-ring-electrode structure to resist high-voltage breakdown.

  2. Optimized scalable network switch

    DOEpatents

    Blumrich, Matthias A.; Chen, Dong; Coteus, Paul W.; Gara, Alan G.; Giampapa, Mark E.; Heidelberger, Philip; Steinmacher-Burow, Burkhard D.; Takken, Todd E.; Vranas, Pavlos M.

    2007-12-04

    In a massively parallel computing system having a plurality of nodes configured in m multi-dimensions, each node including a computing device, a method for routing packets towards their destination nodes is provided which includes generating at least one of a 2m plurality of compact bit vectors containing information derived from downstream nodes. A multilevel arbitration process in which downstream information stored in the compact vectors, such as link status information and fullness of downstream buffers, is used to determine a preferred direction and virtual channel for packet transmission. Preferred direction ranges are encoded and virtual channels are selected by examining the plurality of compact bit vectors. This dynamic routing method eliminates the necessity of routing tables, thus enhancing scalability of the switch.

  3. MIRO Calibration Switch Mechanism

    NASA Technical Reports Server (NTRS)

    Suchman, Jason; Salinas, Yuki; Kubo, Holly

    2001-01-01

    The Jet Propulsion Laboratory has designed, analyzed, built, and tested a calibration switch mechanism for the MIRO instrument on the ROSETTA spacecraft. MIRO is the Microwave Instrument for the Rosetta Orbiter; this instrument hopes to investigate the origin of the solar system by studying the origin of comets. Specifically, the instrument will be the first to use submillimeter and millimeter wave heterodyne receivers to remotely examine the P-54 Wirtanen comet. In order to calibrate the instrument, it needs to view a hot and cold target. The purpose of the mechanism is to divert the instrument's field of view from the hot target, to the cold target, and then back into space. This cycle is to be repeated every 30 minutes for the duration of the 1.5 year mission. The paper describes the development of the mechanism, as well as analysis and testing techniques.

  4. ''Smart'' watchdog safety switch

    DOEpatents

    Kronberg, J.W.

    1991-10-01

    A method and apparatus for monitoring a process having a periodic output so that the process equipment is not damaged in the event of a controller failure, comprising a low-pass and peak clipping filter, an event detector that generates an event pulse for each valid change in magnitude of the filtered periodic output, a timing pulse generator, a counter that increments upon receipt of any timing pulse and resets to zero on receipt of any event pulse, an alarm that alerts when the count reaches some preselected total count, and a set of relays that opens to stop power to process equipment. An interface module can be added to allow the switch to accept a variety of periodic output signals. 21 figures.

  5. "Smart" watchdog safety switch

    DOEpatents

    Kronberg, James W.

    1991-01-01

    A method and apparatus for monitoring a process having a periodic output so that the process equipment is not damaged in the event of a controller failure, comprising a low-pass and peak clipping filter, an event detector that generates an event pulse for each valid change in magnitude of the filtered periodic output, a timing pulse generator, a counter that increments upon receipt of any timing pulse and resets to zero on receipt of any event pulse, an alarm that alerts when the count reaches some preselected total count, and a set of relays that opens to stop power to process equipment. An interface module can be added to allow the switch to accept a variety of periodic output signals.

  6. FAST OPENING SWITCH

    DOEpatents

    Bender, M.; Bennett, F.K.; Kuckes, A.F.

    1963-09-17

    A fast-acting electric switch is described for rapidly opening a circuit carrying large amounts of electrical power. A thin, conducting foil bridges a gap in this circuit and means are provided for producing a magnetic field and eddy currents in the foil, whereby the foil is rapidly broken to open the circuit across the gap. Advantageously the foil has a hole forming two narrow portions in the foil and the means producing the magnetic field and eddy currents comprises an annular coil having its annulus coaxial with the hole in the foil and turns adjacent the narrow portions of the foil. An electrical current flows through the coil to produce the magnetic field and eddy currents in the foil. (AEC)

  7. High voltage coaxial switch

    DOEpatents

    Rink, John P.

    1983-07-19

    A coaxial high voltage, high current switch having a solid cylindrical cold cathode coaxially surrounded by a thin hollow cylindrical inner electrode and a larger hollow cylindrical outer electrode. A high voltage trigger between the cathode and the inner electrode causes electrons to be emitted from the cathode and flow to the inner electrode preferably through a vacuum. Some of the electrons penetrate the inner electrode and cause a volumetric discharge in the gas (which may be merely air) between the inner and outer electrodes. The discharge provides a low impedance path between a high voltage charge placed on the outer electrode and a load (which may be a high power laser) coupled to the inner electrode. For high repetition rate the gas between the inner and outer electrodes may be continuously exchanged or refreshed under pressure.

  8. High voltage coaxial switch

    DOEpatents

    Rink, J.P.

    1983-07-19

    A coaxial high voltage, high current switch having a solid cylindrical cold cathode coaxially surrounded by a thin hollow cylindrical inner electrode and a larger hollow cylindrical outer electrode. A high voltage trigger between the cathode and the inner electrode causes electrons to be emitted from the cathode and flow to the inner electrode preferably through a vacuum. Some of the electrons penetrate the inner electrode and cause a volumetric discharge in the gas (which may be merely air) between the inner and outer electrodes. The discharge provides a low impedance path between a high voltage charge placed on the outer electrode and a load (which may be a high power laser) coupled to the inner electrode. For high repetition rate the gas between the inner and outer electrodes may be continuously exchanged or refreshed under pressure. 3 figs.

  9. Optimized scalable network switch

    DOEpatents

    Blumrich, Matthias A.; Chen, Dong; Coteus, Paul W.

    2010-02-23

    In a massively parallel computing system having a plurality of nodes configured in m multi-dimensions, each node including a computing device, a method for routing packets towards their destination nodes is provided which includes generating at least one of a 2m plurality of compact bit vectors containing information derived from downstream nodes. A multilevel arbitration process in which downstream information stored in the compact vectors, such as link status information and fullness of downstream buffers, is used to determine a preferred direction and virtual channel for packet transmission. Preferred direction ranges are encoded and virtual channels are selected by examining the plurality of compact bit vectors. This dynamic routing method eliminates the necessity of routing tables, thus enhancing scalability of the switch.

  10. 49 CFR 236.6 - Hand-operated switch equipped with switch circuit controller.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 4 2013-10-01 2013-10-01 false Hand-operated switch equipped with switch circuit..., AND APPLIANCES Rules and Instructions: All Systems General § 236.6 Hand-operated switch equipped with switch circuit controller. Hand-operated switch equipped with switch circuit controller connected to the...

  11. 49 CFR 236.6 - Hand-operated switch equipped with switch circuit controller.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 4 2014-10-01 2014-10-01 false Hand-operated switch equipped with switch circuit..., AND APPLIANCES Rules and Instructions: All Systems General § 236.6 Hand-operated switch equipped with switch circuit controller. Hand-operated switch equipped with switch circuit controller connected to the...

  12. 49 CFR 236.6 - Hand-operated switch equipped with switch circuit controller.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 4 2011-10-01 2011-10-01 false Hand-operated switch equipped with switch circuit..., AND APPLIANCES Rules and Instructions: All Systems General § 236.6 Hand-operated switch equipped with switch circuit controller. Hand-operated switch equipped with switch circuit controller connected to the...

  13. 49 CFR 236.6 - Hand-operated switch equipped with switch circuit controller.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 4 2012-10-01 2012-10-01 false Hand-operated switch equipped with switch circuit..., AND APPLIANCES Rules and Instructions: All Systems General § 236.6 Hand-operated switch equipped with switch circuit controller. Hand-operated switch equipped with switch circuit controller connected to the...

  14. Heterogeneous basic catalysis

    SciTech Connect

    Hattori, Hideshi

    1995-05-01

    Heterogeneous acid catalysis attracted much attention primarily because heterogeneous acidic catalysts act as catalysts in petroleum refinery and are known as a main catalyst in the cracking process which is the largest process among the industrial chemical processes. In contrast to these extensive studies of heterogeneous acidic catalysts, fewer efforts have been given to the study of heterogeneous basic catalysts. The types of heterogeneous basic catalysts are listed in Table 1. Except for non-oxide catalysts, the basic sites are believed to be surface O atoms. The studies of heterogeneous catalysis have been continuous and progressed steadily. They have never been reviewed in the chemical Reviews before. It is more useful and informative to describe the studies of heterogeneous basic catalysis performed for a long period. In the present article, therefore, the cited papers are not restricted to those published recently, but include those published for the last 25 years. The paper first describes the generation of basic sites before describing methods used in the characterization of basic surfaces. These are indicator methods, temperature programmed desorption (TPD) of CO{sub 2}, UV absorption and luminescence spectroscopies, TPD of H{sub 2}, XPS, IR of CO{sub 2}, IR of pyrrole, and oxygen exchange between CO{sub 2} and the surface. The paper then discusses studies on the catalysis by heterogeneous basic catalysts. Some of these reactions are dehydration, dehydrogenation, hydrogenation, amination, alkylation, ring transformation, and reactions of organosilanes. Catalysts discussed are single component metal oxides, zeolites, non-oxide types, and superbasic catalysts. 141 refs.

  15. Switching Phenomena in a System with No Switches

    NASA Astrophysics Data System (ADS)

    Preis, Tobias; Stanley, H. Eugene

    2010-02-01

    It is widely believed that switching phenomena require switches, but this is actually not true. For an intriguing variety of switching phenomena in nature, the underlying complex system abruptly changes from one state to another in a highly discontinuous fashion. For example, financial market fluctuations are characterized by many abrupt switchings creating increasing trends ("bubble formation") and decreasing trends ("financial collapse"). Such switching occurs on time scales ranging from macroscopic bubbles persisting for hundreds of days to microscopic bubbles persisting only for a few seconds. We analyze a database containing 13,991,275 German DAX Future transactions recorded with a time resolution of 10 msec. For comparison, a database providing 2,592,531 of all S&P500 daily closing prices is used. We ask whether these ubiquitous switching phenomena have quantifiable features independent of the time horizon studied. We find striking scale-free behavior of the volatility after each switching occurs. We interpret our findings as being consistent with time-dependent collective behavior of financial market participants. We test the possible universality of our result by performing a parallel analysis of fluctuations in transaction volume and time intervals between trades. We show that these financial market switching processes have properties similar to those of phase transitions. We suggest that the well-known catastrophic bubbles that occur on large time scales—such as the most recent financial crisis—are no outliers but single dramatic representatives caused by the switching between upward and downward trends on time scales varying over nine orders of magnitude from very large (≈102 days) down to very small (≈10 ms).

  16. Keep flexible - Keep switching! The influence of forced task switching on voluntary task switching.

    PubMed

    Fröber, Kerstin; Dreisbach, Gesine

    2017-05-01

    Goal directed behavior depends on a dynamic balance between cognitive flexibility and stability. Identifying factors that modulate the balance between these control states is therefore of major interest for the understanding of human action control. In two experiments we used a hybrid paradigm combining forced- and free-choice task switching and measured spontaneous voluntary switch rate (VSR) as an indicator of cognitive flexibility. In Experiment 1 participants were free to choose a given task on 75%, 50%, or 25% of all trials. In the remaining forced-choice trials task repetitions and switches were roughly equally distributed. Results showed that VSR increases with increasing proportion of forced choices. To clarify whether the frequency of forced choices per se or the frequency of forced task switches in particular drives this effect we conducted Experiment 2. In a fully orthogonal between design participants were free to choose a given task on 75% or 25% of all trials with a predetermined switch rate in the remaining forced-choice trials of 75% or 25%, respectively. Results revealed an interaction of both manipulations: The highest VSR was found for the combination of 75% forced-choice trials with 75% forced switch rate, while VSR for 75% forced-choice trials with 25% forced switch rate was still higher than VSRs in both conditions with 25% forced-choice trials. This suggests that a context of frequent forced task switching changes global control parameters towards more flexible behavior. Copyright © 2017 Elsevier B.V. All rights reserved.

  17. Channelized coplanar waveguide pin-diode switches

    NASA Technical Reports Server (NTRS)

    Ponchak, G. E.; Simons, R. N.

    1989-01-01

    Three different types of p-i-n diode, reflective CPW switches are presented. The first two switches are the series and the shunt mounted diode switches. Each has achieved greater than 15 dB of isolation over a broad bandwidth. The third switch is a narrow band, high isolation switched filter which has achieved 19 dB of isolation. Equivalent circuits and measured performance for each switch is presented.

  18. Liquid metal switches for electromagnetic railgun systems

    SciTech Connect

    Mitcham, A.J.; Prothero, D.H.; Brooks, J.C. )

    1991-01-01

    The need for a reliable and effective commutating switch is essential to the operation of an HPG-driven railgun system. This switch must offer the lowest possible resistance during the current build up time and then must commutate the current quickly and efficiently into the railgun barrel. This paper considers the essential requirements for such a switch and, after briefly reviewing the available switch technologies, describes a new type of switch based on a liquid metal switching medium.

  19. Program to Develop an Optical Transistor and Switch.

    DTIC Science & Technology

    2014-09-26

    MATERIAL SELECTION FOR OPTICAL SWITCHES AND TRANSISTORS........ 2 2.1 Condensed Matter (Solids and Liquids)..................... 5 2 2 Molecular Gases...reviewing Condensed Matter (solids and liquids), Molecular Gases, and Free and Quasi-Free Atom Media. While gases and free atoms may seem remote from...detection. In the basic device, three atomic or ’ molecular levels are involved. The frequency of the control beam is orof resonant with the transition

  20. Study of high current commutation by explosive switch

    NASA Astrophysics Data System (ADS)

    Usuba, S.; Kakudate, Y.; Yoshida, M.; Fujiwara, S.; Miyamoto, M.; Morita, T.; Kubota, A.; den, M.

    1993-01-01

    The study presents the basic experimental data obtained with a large current opening switch for current commutation using explosives. It is shown that currents up to a maximum of 40 kA can be completely interrupted within 30 microsec. The mechanism of current interruption using a thin conductor plate and methods of measuring interrupting current with a pickup coil and taking photographs with a high-speed camera (one frame per microsec) are discussed.

  1. Optogenetic switches for light-controlled gene expression in yeast.

    PubMed

    Salinas, Francisco; Rojas, Vicente; Delgado, Verónica; Agosin, Eduardo; Larrondo, Luis F

    2017-04-01

    Light is increasingly recognized as an efficient means of controlling diverse biological processes with high spatiotemporal resolution. Optogenetic switches are molecular devices for regulating light-controlled gene expression, protein localization, signal transduction and protein-protein interactions. Such molecular components have been mainly developed through the use of photoreceptors, which upon light stimulation undergo conformational changes passing to an active state. The current repertoires of optogenetic switches include red, blue and UV-B light photoreceptors and have been implemented in a broad spectrum of biological platforms. In this review, we revisit different optogenetic switches that have been used in diverse biological platforms, with emphasis on those used for light-controlled gene expression in the budding yeast Saccharomyces cerevisiae. The implementation of these switches overcomes the use of traditional chemical inducers, allowing precise control of gene expression at lower costs, without leaving chemical traces, and positively impacting the production of high-value metabolites and heterologous proteins. Additionally, we highlight the potential of utilizing this technology beyond laboratory strains, by optimizing it for use in yeasts tamed for industrial processes. Finally, we discuss how fungal photoreceptors could serve as a source of biological parts for the development of novel optogenetic switches with improved characteristics. Although optogenetic tools have had a strong impact on basic research, their use in applied sciences is still undervalued. Therefore, the invitation for the future is to utilize this technology in biotechnological and industrial settings.

  2. Two independent switches regulate cytoplasmic dynein's processivity and directionality.

    PubMed

    Walter, Wilhelm J; Koonce, Michael P; Brenner, Bernhard; Steffen, Walter

    2012-04-03

    Cytoplasmic dynein is a microtubule-based molecular motor that participates in a multitude of cell activities, from cell division to organelle transport. Unlike kinesin and myosin, where different tasks are performed by highly specialized members of these superfamilies, a single form of the dynein heavy chain is utilized for different functions. This versatility demands an extensive regulation of motor function. Using an improved application of an optical trap, we were now able to demonstrate that cytoplasmic dynein can generate a discrete power stroke as well as a processive walk in either direction; i.e., towards the plus- or towards the minus-end of a microtubule. Thus, dynein's motor functions can be described by four basic modes of motion: processive and nonprocessive movement, and movement in the forward and reverse directions. Importantly, these four modes of movement can be controlled by two switches. One switch, based on phosphate, determines the directionality of movement. The second switch, depending on magnesium, converts cytoplasmic dynein from a nonprocessive to a processive motor. The two switches can be triggered separately or jointly by changing concentrations of phosphate and magnesium in the local environment. The control of four modes of movement by two switches has major implications for our understanding of the cellular functions and regulation of cytoplasmic dynein. Based on recent studies of dynein's structure we are able to draw new conclusions on cytoplasmic dynein's stepping mechanism.

  3. Resistive switching characteristic of electrolyte-oxide-semiconductor structures

    NASA Astrophysics Data System (ADS)

    Chen, Xiaoyu; Wang, Hao; Sun, Gongchen; Ma, Xiaoyu; Gao, Jianguang; Wu, Wengang

    2017-08-01

    The resistive switching characteristic of SiO2 thin film in electrolyte-oxide-semiconductor (EOS) structures under certain bias voltage is reported. To analyze the mechanism of the resistive switching characteristic, a batch of EOS structures were fabricated under various conditions and their electrical properties were measured with a set of three-electrode systems. A theoretical model based on the formation and rupture of conductive filaments in the oxide layer is proposed to reveal the mechanism of the resistive switching characteristic, followed by an experimental investigation of Auger electron spectroscopy (AES) and secondary ion mass spectroscopy (SIMS) to verify the proposed theoretical model. It is found that different threshold voltage, reverse leakage current and slope value features of the switching I-V characteristic can be observed in different EOS structures with different electrolyte solutions as well as different SiO2 layers made by different fabrication processes or in different thicknesses. With a simple fabrication process and significant resistive switching characteristic, the EOS structures show great potential for chemical/biochemical applications. Project supported by the National Natural Science Foundation of China (No. 61274116) and the National Basic Research Program of China (No. 2015CB352100).

  4. Basic research championed

    NASA Astrophysics Data System (ADS)

    Friebele, Elaine

    In April, the Office of National Science and Technology Policy released its biennial report to Congress. Science and Technology: Shaping the Twenty-First Century addresses the President's policy for maintaining U.S. leadership in science and technology, significant developments, and important national issues in science, and opportunities to use science and technology in federal programs and national goals. The administration strongly supports basic research as a sound investment and an inspiration to society. As corporate laboratories increasingly favor applied R&D projects, the federal government is becoming the dominant sponsor of long-term, basic research.

  5. Alarm toe switch. [Patent application

    DOEpatents

    Ganyard, F.P.

    1980-11-18

    An alarm toe switch inserted within a shoe for energizing an alarm circuit in a covert manner includes an insole mounting pad into which a miniature reed switch is fixedly molded. An elongated slot perpendicular to the reed switch is formed in the bottom surface of the mounting pad. A permanent cylindrical magnet positioned in the forward portion of the slot with a diameter greater than the pad thickness causes a bump above the pad. A foam rubber block is also positioned in the slot rearwardly of the magnet and holds the magnet in normal inoperative relation. A non-magnetic support plate covers the slot and holds the magnet and foam rubber in the slot. The plate minimizes bending and frictional forces to improve movement of the magnet for reliable switch activation. The bump occupies the knuckle space beneath the big toe. When the big toe is scrunched rearwardly the magnet is moved within the slot relative to the reed switch, thus magnetically activating the switch. When toe pressure is released the foam rubber block forces the magnet back into normal inoperative position to deactivate the reed switch.

  6. Multiscroll attractors by switching systems.

    PubMed

    Campos-Cantón, E; Barajas-Ramírez, J G; Solís-Perales, G; Femat, R

    2010-03-01

    In this paper, we present a class of three-dimensional dynamical systems having multiscrolls which we call unstable dissipative systems (UDSs). The UDSs are dissipative in one of its components but unstable in the other two. This class of systems is constructed with a switching law to display various multiscroll strange attractors. The multiscroll strange attractors result from the combination of several unstable "one-spiral" trajectories by means of switching. Each of these trajectories lies around a saddle hyperbolic stationary point. Thus, we describe how a piecewise-linear switching system yields multiscroll attractors, symmetric or asymmetric, with chaotic behavior.

  7. Phenotypic plasticity with instantaneous but delayed switches.

    PubMed

    Utz, Margarete; Jeschke, Jonathan M; Loeschcke, Volker; Gabriel, Wilfried

    2014-01-07

    Phenotypic plasticity is a widespread phenomenon, allowing organisms to better adapt to changing environments. Most empirical and theoretical studies are restricted to irreversible plasticity where the expression of a specific phenotype is mostly determined during development. However, reversible plasticity is not uncommon; here, organisms are able to switch back and forth between phenotypes. We present two optimization models for the fitness of (i) non-plastic, (ii) irreversibly plastic, and (iii) reversibly plastic genotypes in a fluctuating environment. In one model, the fitness values of an organism during different life phases act together multiplicatively (so as to consider traits that are related to survival). The other model additionally considers additive effects (corresponding to traits related to fecundity). Both models yield qualitatively similar results. If the only costs of reversible plasticity are due to temporal maladaptation while switching between phenotypes, reversibility is virtually always advantageous over irreversibility, especially for slow environmental fluctuations. If reversibility implies an overall decreased fitness, then irreversibility is advantageous if the environment fluctuates quickly or if stress events last relatively short. Our results are supported by observations from different types of organisms and have implications for many basic and applied research questions, e.g., on invasive alien species.

  8. K-band high power latching switch

    NASA Astrophysics Data System (ADS)

    Mlinar, M. J.; Piotrowski, W. S.; Raue, J. E.

    1980-12-01

    A 19 GHz waveguide latching switch with a bandwidth of 1400 MHz and an exceptionally low insertion loss of 0.25 dB was demonstrated. The RF and driver ferrites are separate structures and can be optimized individually. This analysis for each structure is separately detailed. Basically, the RF section features a dual turnstile junction. The circulator consists of a dielectric tube which contains two ferrite rods, and a dielectric spacer separating the ferrite parts along the center of symmetry of the waveguide to form two turnstiles. This subassembly is indexed and locked in the center of symmetry of a uniform junction of three waveguides by the metallic transformers installed in the top and bottom walls of the housing. The switching junction and its actuating circuitry met all RF performance objectives and all shock and vibration requirements with no physical damage or performance degradation. It exceeds thermal requirements by operating over a 100 C temperature range (-44 C to +56 C) and has a high power handling capability allowing up to 100 W of CW input power.

  9. Characteristics of switching plasma in an inverse-pinch switch

    NASA Technical Reports Server (NTRS)

    Lee, Ja H.; Choi, Sang H.; Venable, Demetrius D.; Han, Kwang S.; Nam, Sang H.

    1993-01-01

    Characteristics of the plasma that switches on tens of giga volt-ampere in an inverse-pinch plasma switch (INPIStron) have been made. Through optical and spectroscopic diagnostics of the current carrying plasma, the current density, the motion of current paths, dominant ionic species have been determined in order to access their effects on circuit parameters and material erosion. Also the optimum operational condition of the plasma-puff triggering method required for azimuthally uniform conduction in the INPIStron has been determined.

  10. Low impedance switch

    DOEpatents

    Hornig, Donald F.

    1976-01-01

    1. A low inductance switch comprising a pair of spaced apart, annularly shaped, plate members of conducting material supported in substantially parallel, insulated relationship, said plate members being provided with a plurality of radially extending, spoke-like extensions whereby said members may be connected into a plurality of electrical circuits, and an electrical discharge means connected across said spaced plate members for effecting the simultaneous closing of the electrical circuits connected thereto, said electrical discharge means including an elongated, sealed envelope which contains an ionizable gas and which is supported on one of said plate members with the major axis of said envelope extending generally perpendicular to the plane of said plate members, a pair of elongated, spaced apart, insulated electrodes supported within said envelope and extending axially thereof, one of said electrodes being connected to each of said plate members, and a third, firing or trigger electrode supported within said envelope intermediate said main electrodes and being insulated from said main electrodes.

  11. Regenerative switching CMOS system

    DOEpatents

    Welch, James D.

    1998-01-01

    Complementary Metal Oxide Semiconductor (CMOS) Schottky barrier Field Effect Transistor systems, which are a seriesed combination of N and P-Channel MOSFETS, in which Source Schottky barrier junctions of the N and P-Channel Schottky barrier MOSFETS are electically interconnected, (rather than the Drains as in conventional diffused junction CMOS), which Schottky barrier MOSFET system demonstrates Regenerative Inverting Switching Characteristics in use are disclosed. Both the N and P-Channel Schottky barrier MOSFET devices are unique in that they provide operational Drain Current vs. Drain to Source voltage as a function of Gate voltage only where the polarities of the Drain voltage and Gate voltage are opposite, referenced to the Source as a common terminal, and where the polarity of the voltage applied to the Gate is appropriate to cause Channel inversion. Experimentally derived results which demonstrate and verify the operation of N and P-Channel Schottky barrier MOSFETS actually fabricated on P and N-type Silicon respectively, by a common procedure using vacuum deposited Chromium as a Schottky barrier forming metal, are also provided.

  12. Regenerative switching CMOS system

    DOEpatents

    Welch, J.D.

    1998-06-02

    Complementary Metal Oxide Semiconductor (CMOS) Schottky barrier Field Effect Transistor systems, which are a series combination of N and P-Channel MOSFETS, in which Source Schottky barrier junctions of the N and P-Channel Schottky barrier MOSFETS are electrically interconnected, (rather than the Drains as in conventional diffused junction CMOS), which Schottky barrier MOSFET system demonstrates Regenerative Inverting Switching Characteristics in use are disclosed. Both the N and P-Channel Schottky barrier MOSFET devices are unique in that they provide operational Drain Current vs. Drain to Source voltage as a function of Gate voltage only where the polarities of the Drain voltage and Gate voltage are opposite, referenced to the Source as a common terminal, and where the polarity of the voltage applied to the Gate is appropriate to cause Channel inversion. Experimentally derived results which demonstrate and verify the operation of N and P-Channel Schottky barrier MOSFETS actually fabricated on P and N-type Silicon respectively, by a common procedure using vacuum deposited Chromium as a Schottky barrier forming metal, are also provided. 14 figs.

  13. The magnetoelectrochemical switch.

    PubMed

    Popa, Petru Lunca; Kemp, Neil T; Majjad, Hicham; Dalmas, Guillaume; Faramarzi, Vina; Andreas, Christian; Hertel, Riccardo; Doudin, Bernard

    2014-07-22

    In the field of spintronics, the archetype solid-state two-terminal device is the spin valve, where the resistance is controlled by the magnetization configuration. We show here how this concept of spin-dependent switch can be extended to magnetic electrodes in solution, by magnetic control of their chemical environment. Appropriate nanoscale design allows a huge enhancement of the magnetic force field experienced by paramagnetic molecular species in solutions, which changes between repulsive and attractive on changing the electrodes' magnetic orientations. Specifically, the field gradient force created within a sub-100-nm-sized nanogap separating two magnetic electrodes can be reversed by changing the orientation of the electrodes' magnetization relative to the current flowing between the electrodes. This can result in a breaking or making of an electric nanocontact, with a change of resistance by a factor of up to 10(3). The results reveal how an external field can impact chemical equilibrium in the vicinity of nanoscale magnetic circuits.

  14. The magnetoelectrochemical switch

    PubMed Central

    Lunca Popa, Petru; Kemp, Neil T.; Majjad, Hicham; Dalmas, Guillaume; Faramarzi, Vina; Andreas, Christian; Hertel, Riccardo; Doudin, Bernard

    2014-01-01

    In the field of spintronics, the archetype solid-state two-terminal device is the spin valve, where the resistance is controlled by the magnetization configuration. We show here how this concept of spin-dependent switch can be extended to magnetic electrodes in solution, by magnetic control of their chemical environment. Appropriate nanoscale design allows a huge enhancement of the magnetic force field experienced by paramagnetic molecular species in solutions, which changes between repulsive and attractive on changing the electrodes’ magnetic orientations. Specifically, the field gradient force created within a sub-100-nm-sized nanogap separating two magnetic electrodes can be reversed by changing the orientation of the electrodes’ magnetization relative to the current flowing between the electrodes. This can result in a breaking or making of an electric nanocontact, with a change of resistance by a factor of up to 103. The results reveal how an external field can impact chemical equilibrium in the vicinity of nanoscale magnetic circuits. PMID:25009179

  15. Electrically switched ion exchange

    SciTech Connect

    Lilga, M.A.; Schwartz, D.T.; Genders, D.

    1997-10-01

    A variety of waste types containing radioactive {sup 137}Cs are found throughout the DOE complex. These waste types include water in reactor cooling basins, radioactive high-level waste (HLW) in underground storage tanks, and groundwater. Safety and regulatory requirements and economics require the removal of radiocesium before these wastes can be permanently disposed of. Electrically Switched Ion Exchange (ESIX) is an approach for radioactive cesium separation that combines IX and electrochemistry to provide a selective, reversible, and economic separation method that also produces little or no secondary waste. In the ESIX process, an electroactive IX film is deposited electrochemically onto a high-surface area electrode, and ion uptake and elution are controlled directly by modulating the potential of the film. For cesium, the electroactive films under investigation are ferrocyanides, which are well known to have high selectivities for cesium in concentrated sodium solutions. When a cathode potential is applied to the film, Fe{sup +3} is reduced to the Fe{sup +2} state, and a cation must be intercalated into the film to maintain charge neutrality (i.e., Cs{sup +} is loaded). Conversely, if an anodic potential is applied, a cation must be released from the film (i.e., Cs{sup +} is unloaded). Therefore, to load the film with cesium, the film is simply reduced; to unload cesium, the film is oxidized.

  16. Modelling and properties of a nonlinear autonomous switching system in fed-batch culture of glycerol

    NASA Astrophysics Data System (ADS)

    Wang, Juan; Sun, Qingying; Feng, Enmin

    2012-11-01

    A nonlinear autonomous switching system is proposed to describe the coupled fed-batch fermentation with the pH as the feedback parameter. We prove the non-Zeno behaviors of the switching system and some basic properties of its solution, including the existence, uniqueness, boundedness and regularity. Numerical simulation is also carried out, which reveals that the proposed system can describe the factual fermentation process properly.

  17. Basic Writing: Progressive Proofreading.

    ERIC Educational Resources Information Center

    Black, Lynette C.

    Writing problems in the basic college freshman writing course result from the students' misconception that once they get the required number of words down on paper their compositions are unalterable, and teachers' misconception that serving as an editor, correcting errors and rewriting sentences, is an effective teaching tool. Students'…

  18. Basic Internet Software Toolkit.

    ERIC Educational Resources Information Center

    Buchanan, Larry

    1998-01-01

    Once schools are connected to the Internet, the next step is getting network workstations configured for Internet access. This article describes a basic toolkit comprising software currently available on the Internet for free or modest cost. Lists URLs for Web browser, Telnet, FTP, file decompression, portable document format (PDF) reader,…

  19. Focus on Basics, 1998.

    ERIC Educational Resources Information Center

    Focus on Basics, 1998

    1998-01-01

    This volume contains the four 1998 quarterly issues of this newsletter that present best practices, current research on adult learning and literacy, and information on how research is used by adult basic education teachers, counselors, program administrators, and policy makers. The following are among the major articles included: "Power,…

  20. Basic Electricity. Part 1.

    ERIC Educational Resources Information Center

    Kilmer, Donald C.

    A primarily illustrated introduction to the basics of electricity is presented in this guide, the first of a set of four designed for the student interested in a vocation in electrical work. This guide is intended for the first-year student and provides mostly diagrams with accompanying defintions/information in three units, each covering one of…

  1. Swahili Basic Course.

    ERIC Educational Resources Information Center

    Defense Language Inst., Washington, DC.

    This basic audiolingual course in standard Swahili appears in six volumes, Lesson Units 1-56. Units consist of a "blueprint" prefatory page outlining the phonological, morphological, and syntactic structures and new vocabulary to be presented; perception drills; Swahili dialog with cartoon guides and English translation; pattern and recombination…

  2. Basic Electronics II.

    ERIC Educational Resources Information Center

    Willison, Neal A.; Shelton, James K.

    Designed for use in basic electronics programs, this curriculum guide is comprised of 15 units of instruction. Unit titles are Review of the Nature of Matter and the P-N Junction, Rectifiers, Filters, Special Semiconductor Diodes, Bipolar-Junction Diodes, Bipolar Transistor Circuits, Transistor Amplifiers, Operational Amplifiers, Logic Devices,…

  3. Reading for Basic Understanding.

    ERIC Educational Resources Information Center

    Mercer County Community Coll., Trenton, NJ.

    This document offers materials for a year-long course on general basic reading skills that was part of a workplace literacy project developed by Mercer County Community College (New Jersey), and its partners. The document contains the following: (1) outlines (each of which contains objectives, a topical outline, and list of textbooks) for two…

  4. Hindi Basic Reader.

    ERIC Educational Resources Information Center

    Harter, J. Martin; And Others

    This reader is intended to accompany the Basic Course in Spoken Hindi. Following an outline of the Devanagari script, 20 lessons are presented. Each consists of a reading selection, several illustrative sentences in English and Hindi, and a series of questions. Most of the reading selections were adapted from the magazine "Bal-Bharati."…

  5. Basic Nuclear Physics.

    ERIC Educational Resources Information Center

    Bureau of Naval Personnel, Washington, DC.

    Basic concepts of nuclear structures, radiation, nuclear reactions, and health physics are presented in this text, prepared for naval officers. Applications to the area of nuclear power are described in connection with pressurized water reactors, experimental boiling water reactors, homogeneous reactor experiments, and experimental breeder…

  6. Basics of Online Searching.

    ERIC Educational Resources Information Center

    Meadow, Charles T.; Cochrane, Pauline (Atherton)

    Intended to teach the principles of interactive bibliographic searching to those with little or no prior experience, this textbook explains the basic elements of online information retrieval and compares the major database search systems. Its chapters address (1) relevant definitions and vocabulary; (2) the conceptual facets of database searching,…

  7. Canadian Adult Basic Education.

    ERIC Educational Resources Information Center

    Brooke, W. Michael, Comp.

    "Trends," a publication of the Canadian Association for Adult Education, is a collection of abstracts on selected subjects affecting adult education; this issue is on adult basic education (ABE). It covers teachers and teacher training, psychological factors relating to the ABE teacher and students, manuals for teachers, instructional…

  8. Basic Blueprint Reading.

    ERIC Educational Resources Information Center

    Deieso, Angie; Meier, Jean

    This workbook, designed for workplace literacy courses, contains materials for a basic course in blueprint reading. The course provides a review of mathematics, information about using measuring tools to read blueprints, an explanation of the principles of blueprint drawing, and instructions on interpreting blueprint specifications. Introductory…

  9. Basic Math I.

    ERIC Educational Resources Information Center

    Mercer County Community Coll., Trenton, NJ.

    This document offers instructional materials for a 60-hour course on basic math operations involving decimals, fractions, and proportions as applied in the workplace. The course, part of a workplace literacy project developed by Mercer County Community College (New Jersey) and its partners, contains the following: course outline; 17 lesson…

  10. Basic Structure Content Scaling.

    ERIC Educational Resources Information Center

    Jackson, Douglas N.; Helmes, Edward

    1979-01-01

    A basic structure approach is proposed for obtaining multidimensional scale values for attitude, achievement, or personality items from response data. The technique permits the unconfounding of scale values due to response bias and content and partitions item indices of popularity or difficulty among a number of relevant dimensions. (Author/BH)

  11. Internet Training: The Basics.

    ERIC Educational Resources Information Center

    Gallo, Gail; Wichowski, Chester P.

    This paper outlines the basic information teachers need to know to use the World Wide Web for research and communication, using Netscape 3.04. Topics covered include the following: what is the World Wide Web?; what is a browser?; accessing the Web; moving around a web document; the Uniform Resource Locator (URL); Bookmarks; saving and printing a…

  12. Basic Engineer Equipment Mechanic.

    ERIC Educational Resources Information Center

    Marine Corps Inst., Washington, DC.

    This student guide, one of a series of correspondence training courses designed to improve the job performance of members of the Marine Corps, deals with the skills needed by basic engineer equipment mechanics. Addressed in the four individual units of the course are the following topics: mechanics and their tools (mechanics, hand tools, and power…

  13. Basic Publication Fundamentals.

    ERIC Educational Resources Information Center

    Savedge, Charles E., Ed.

    Designed for students who produce newspapers and newsmagazines in junior high, middle, and elementary schools, this booklet is both a scorebook and a fundamentals text. The scorebook provides realistic criteria for judging publication excellence at these educational levels. All the basics for good publications are included in the text of the…

  14. Basic Structure of Swahili.

    ERIC Educational Resources Information Center

    Brain, James L.

    This text in basic Swahili structure was originally written in East Africa as a teacher's guide and student's reference and was used as a basis for a course taught largely orally (with the teacher using drills he had prepared himself). The author suggests that although it is not a "linguist's book," it should prove useful to those who are teaching…

  15. Computer Programming: BASIC.

    ERIC Educational Resources Information Center

    Fisher, Patience; And Others

    This guide was prepared to help teachers of the Lincoln Public School's introductory computer programming course in BASIC to make the necessary adjustments for changes made in the course since the purchase of microcomputers and such peripheral devices as television monitors and disk drives, and the addition of graphics. Intended to teach a…

  16. Back to Basics.

    ERIC Educational Resources Information Center

    Burk, James M.

    1979-01-01

    The back-to-basics movement alone cannot solve many of our pressing educational difficulties. Absenteeism and discipline problems point out the need for schooling that fosters human relationships and individual interests. This speech was presented at the American Association of School Administrators Convention, New Orleans, Louisiana, February 16,…

  17. FULA BASIC COURSE.

    ERIC Educational Resources Information Center

    SWIFT, LLOYD B.; AND OTHERS

    THIS BEGINNING COURSE IS AN INTRODUCTION TO FULA (KNOWN VARIOUSLY AS FULANI, FUL, PEUL, OR PHEUL), A NIGER-CONGO LANGUAGE SPOKEN THROUGHOUT THE GRASSLAND AREAS OF WEST AFRICA FROM THE ATLANTIC TO CAMEROUN. THE TEXT IS ONE OF A SERIES OF SHORT BASIC COURSES IN SELECTED AFRICAN LANGUAGES BEING PREPARED BY THE FOREIGN SERVICE INSTITUTE. IT IS…

  18. Basic Soils. Revision.

    ERIC Educational Resources Information Center

    Montana State Univ., Bozeman. Dept. of Agricultural and Industrial Education.

    This curriculum guide is designed for use in teaching a course in basic soils that is intended for college freshmen. Addressed in the individual lessons of the unit are the following topics: the way in which soil is formed, the physical properties of soil, the chemical properties of soil, the biotic properties of soil, plant-soil-water…

  19. Developing Basic Electronics Aptitudes.

    ERIC Educational Resources Information Center

    Lakeshore Technical Coll., Cleveland, WI.

    This curriculum guide provides materials for basic training in electrical and electronic theory to enable participants to analyze circuits and use test equipment to verify electrical operations and to succeed in the beginning electrical and electronic courses in the Lakeshore Technical College (Wisconsin) electronics programs. The course includes…

  20. Basic Experiments in Telecommunications.

    ERIC Educational Resources Information Center

    Andresen, S. G.

    Presented is a set of laboratory experiments developed to provide students with demonstrations and hands-on experiences with a variety of basic communications methods. These experiments may be used with students who have training in engineering, as well as those with social sciences who have no engineering background. Detailed exercises dealing…

  1. Reflections on basic science.

    PubMed

    Piatigorsky, Joram

    2010-01-01

    After almost 50 years in science, I believe that there is an acceptable, often advantageous chasm between open-ended basic research-free exploration without a practical destination and in which the original ideas may fade into new concepts-and translational research or clinical research. My basic research on crystalline (proteins conferring the optical properties of the eye lens) led me down paths I never would have considered if I were conducting translational research. My investigations ranged from jellyfish to mice and resulted in the gene-sharing concept, which showed that the same protein can have distinct molecular functions depending upon its expression pattern and, conversely, that different proteins can serve similar functional roles. This essay portrays basic science as a creative narrative, comparable to literary and artistic endeavors. Preserving the autonomy of open-ended basic research and recognizing its artistic, narrative qualities will accelerate the development of innovative concepts, create a rich resource of information feeding translational research, and have a positive impact by attracting creative individuals to science.

  2. Lippincott Basic Reading Program.

    ERIC Educational Resources Information Center

    Monterey Peninsula Unified School District, Monterey, CA.

    This program, included in "Effective Reading Programs...," serves 459 students in grades 1-3 at 15 elementary schools. The program employs a diagnostic-prescriptive approach to instruction in a nongraded setting through the use of the Lippincott Basic Reading program. When a child enters the program, he is introduced to a decoding…

  3. Basic Pneumatics. Instructor's Guide.

    ERIC Educational Resources Information Center

    Fessehaye, Michael

    This instructor's guide is designed for use by industrial vocational teachers in teaching a course on basic pneumatics. Covered in the individual units are the following topics: an introduction to pneumatics (including the operation of a service station hoist); fundamentals and physical laws; air compressors (positive displacement compressors;…

  4. Focus on Basics, 1997.

    ERIC Educational Resources Information Center

    Focus on Basics, 1997

    1997-01-01

    Together, these four newsletters contain 36 articles devoted to adult literacy research and practice and the relationship between them. The following articles are included: "A Productive Partnership" (Richard J. Murnane, Bob Bickerton); "Welcome to 'Focus on Basics'" (Barbara Garner); "Applying Research on the Last Frontier" (Karen Backlund, Kathy…

  5. Korean Basic Course.

    ERIC Educational Resources Information Center

    Defense Language Inst., Washington, DC.

    These 11 volumes of the Korean Basic Course comprise 112 lesson units designed to train native English language speakers to Level 3 proficiency in comprehension and speaking and Level 2 proficiency in reading and writing Korean. (Level 5 on this scale is native-speaker level.) Intended for classroom use in the Defense Language Institute intensive…

  6. Networks: The Basics.

    ERIC Educational Resources Information Center

    Lomarcan, Diana L.

    1995-01-01

    Introduces the information superhighway (the Internet), and presents a guide to navigating it. Offers basic instruction on obtaining and learning to use network accounts; locating addresses using Archie and Wide Area Information Server; retrieving information using file transfer protocol; utilizing Gopher to find and retrieve; browsing the World…

  7. Baby Bath Basics

    MedlinePlus

    ... feel more comfortable at bath time. Start by learning baby bath basics. There's no need to give your newborn a bath every day. Three times a week might be enough until your baby becomes more mobile. Bathing your baby too much can dry out ...

  8. FULA BASIC COURSE.

    ERIC Educational Resources Information Center

    SWIFT, LLOYD B.; AND OTHERS

    THIS BEGINNING COURSE IS AN INTRODUCTION TO FULA (KNOWN VARIOUSLY AS FULANI, FUL, PEUL, OR PHEUL), A NIGER-CONGO LANGUAGE SPOKEN THROUGHOUT THE GRASSLAND AREAS OF WEST AFRICA FROM THE ATLANTIC TO CAMEROUN. THE TEXT IS ONE OF A SERIES OF SHORT BASIC COURSES IN SELECTED AFRICAN LANGUAGES BEING PREPARED BY THE FOREIGN SERVICE INSTITUTE. IT IS…

  9. Basic Pneumatics. Instructor's Guide.

    ERIC Educational Resources Information Center

    Fessehaye, Michael

    This instructor's guide is designed for use by industrial vocational teachers in teaching a course on basic pneumatics. Covered in the individual units are the following topics: an introduction to pneumatics (including the operation of a service station hoist); fundamentals and physical laws; air compressors (positive displacement compressors;…

  10. Basic confocal microscopy.

    PubMed

    Smith, Carolyn L

    2011-07-01

    This unit introduces the reader to the basic principles of confocal microscopy and the design and capabilities of current confocal microscopes. The advantages and disadvantages of confocal microscopy compared to other techniques for fluorescence imaging are described. There are also practical guidelines for sample preparation and optimization of imaging parameters, as well as examples of some of the applications of confocal microscopy.

  11. Czech Basic Course: Folklore.

    ERIC Educational Resources Information Center

    Defense Language Inst., Washington, DC.

    This booklet is designed for use in the advanced phase of the Defense Language Institute's "Basic Course" in Czech. It is used in the advanced phase as a part of cultural background information. Reading selections, with vocabulary lists, include: (1) ethnography; (2) incantations and spells; (3) proverbs, sayings, and weather lore; (4) fairy tales…

  12. Adult Basic Education Curriculum.

    ERIC Educational Resources Information Center

    Massachusetts Career Development Inst., Springfield.

    This booklet, aimed at adult basic education students, pinpoints and summarizes a few common spelling rules to help make spelling easier, and includes a component on using the dictionary. In the text, each rule is presented with many examples. Exercises follow each spelling rule, allowing students the opportunity to apply the rule to specific…

  13. Turkish Basic Course.

    ERIC Educational Resources Information Center

    Defense Language Inst., Washington, DC.

    These 14 volumes of the Defense Language Institute's basic course in Turkish consist of 112 lesson units designed to train native English language speakers to Level 3 proficiency in comprehending, speaking, reading, and writing Turkish. (Native-speaker fluency is Level 5.) An introduction to the sound system, vowel harmony, and syllable division…

  14. Swahili Basic Course.

    ERIC Educational Resources Information Center

    Defense Language Inst., Washington, DC.

    This basic audiolingual course in standard Swahili appears in six volumes, Lesson Units 1-56. Units consist of a "blueprint" prefatory page outlining the phonological, morphological, and syntactic structures and new vocabulary to be presented; perception drills; Swahili dialog with cartoon guides and English translation; pattern and recombination…

  15. Basic Media in Education.

    ERIC Educational Resources Information Center

    Harrell, John

    Intended as a guide to the use of different media for use in the classroom, this document demonstrates alternative approaches that may be taken to depicting and communicating images and concepts to others. Some basic tools and materials--including a ruler, matte knife, rubber cement, stapler, felt-tip pens, paint brushes, and lettering pens--are…

  16. Flattening basic blocks.

    SciTech Connect

    Utke, J.; Mathematics and Computer Science

    2006-01-01

    The application of cross country elimination strategies requires access to the computational graph or at least subgraphs for certain scopes, e.g. a basic block. Under the presence of aliased variables the construction of these (sub)graphs encounters ambiguities. We propose an algorithm to construct ambiguity free subgraphs.

  17. Basic Skills Assessment

    ERIC Educational Resources Information Center

    Yin, Alexander C.; Volkwein, J. Fredericks

    2010-01-01

    After surveying 1,827 students in their final year at eighty randomly selected two-year and four-year public and private institutions, American Institutes for Research (2006) reported that approximately 30 percent of students in two-year institutions and nearly 20 percent of students in four-year institutions have only basic quantitative…

  18. Basic Writing: Progressive Proofreading.

    ERIC Educational Resources Information Center

    Black, Lynette C.

    Writing problems in the basic college freshman writing course result from the students' misconception that once they get the required number of words down on paper their compositions are unalterable, and teachers' misconception that serving as an editor, correcting errors and rewriting sentences, is an effective teaching tool. Students'…

  19. Sara Basic Course.

    ERIC Educational Resources Information Center

    Thayer, James E.; Maraby, Julien

    The basic plan of this course in Sara is modeled after "An Experimental Course in Hausa" (FSI 1965). The course uses short cycles consisting of mimicry followed by conversations built on the same vocabulary and syntactic pattern. The format has been condensed and altered. The course contains 95 cycles and would require approximately 50 hours to…

  20. Basic Drafting: Book One.

    ERIC Educational Resources Information Center

    Davis, Ronald; And Others

    The first of a two-book course in drafting, this manual consists of 13 topics in the following units: introduction to drafting, general safety, basic tools and lines, major equipment, applying for a job, media, lettering, reproduction, drawing sheet layout, architect's scale usage, civil engineer's scale usage, mechanical engineer's scale usage,…

  1. Ethanol Basics (Fact Sheet)

    SciTech Connect

    Not Available

    2015-01-01

    Ethanol is a widely-used, domestically-produced renewable fuel made from corn and other plant materials. More than 96% of gasoline sold in the United States contains ethanol. Learn more about this alternative fuel in the Ethanol Basics Fact Sheet, produced by the U.S. Department of Energy's Clean Cities program.

  2. Turkish Basic Course.

    ERIC Educational Resources Information Center

    Defense Language Inst., Washington, DC.

    These 14 volumes of the Defense Language Institute's basic course in Turkish consist of 112 lesson units designed to train native English language speakers to Level 3 proficiency in comprehending, speaking, reading, and writing Turkish. (Native-speaker fluency is Level 5.) An introduction to the sound system, vowel harmony, and syllable division…

  3. Assessing Basic Fact Fluency

    ERIC Educational Resources Information Center

    Kling, Gina; Bay-Williams, Jennifer M.

    2014-01-01

    In this article, the authors share a variety of ways to formatively assess basic fact fluency. The define fluency, raise some issues related to timed testing, and then share a collection of classroom-tested ideas for authentic fact fluency assessment. This article encourages teachers to try a variety of alternative assessments from this sampling,…

  4. Basic Internet Software Toolkit.

    ERIC Educational Resources Information Center

    Buchanan, Larry

    1998-01-01

    Once schools are connected to the Internet, the next step is getting network workstations configured for Internet access. This article describes a basic toolkit comprising software currently available on the Internet for free or modest cost. Lists URLs for Web browser, Telnet, FTP, file decompression, portable document format (PDF) reader,…

  5. Navajo Adult Basic Education.

    ERIC Educational Resources Information Center

    Navajo Community Coll., Tsaile, AZ.

    The objectives of this Special Experimental Demonstration Project in Adult Basic Education for the Navajo were: (1) to raise the educational and social level of Navajo adult students who are unable to read, write, and speak English; (2) to assist the Navajo adult students to take advantage of occupational and vocational training programs; (3) to…

  6. Precompound Reactions: Basic Concepts

    SciTech Connect

    Weidenmueller, H. A.

    2008-04-17

    Because of the non-zero nuclear equilibration time, the compound-nucleus scattering model fails when the incident energy exceeds 10 or 20 MeV, and precompound reactions become important. Basic ideas used in the quantum-statistical approaches to these reactions are described.

  7. Basic Electricity. Part 1.

    ERIC Educational Resources Information Center

    Kilmer, Donald C.

    A primarily illustrated introduction to the basics of electricity is presented in this guide, the first of a set of four designed for the student interested in a vocation in electrical work. This guide is intended for the first-year student and provides mostly diagrams with accompanying defintions/information in three units, each covering one of…

  8. Korean Basic Course.

    ERIC Educational Resources Information Center

    Defense Language Inst., Washington, DC.

    These 11 volumes of the Korean Basic Course comprise 112 lesson units designed to train native English language speakers to Level 3 proficiency in comprehension and speaking and Level 2 proficiency in reading and writing Korean. (Level 5 on this scale is native-speaker level.) Intended for classroom use in the Defense Language Institute intensive…

  9. Toward pulsed power uses for photoconductive semiconductor switches: Closing switches

    SciTech Connect

    Loubriel, G.M.; O'Malley, M.W.; Zutavern, F.J.

    1987-01-01

    Recent results on Photoconductive Semiconductor Switches (PCSS) are presented. For Si and GaAs switches surface flashover, contact degradation, and current limitations are addressed. For Si samples have been obtained that, without being triggered, withstand fields of up to 85 kV/cm produced by an approx.2-..mu..s wide voltage pulse. The 1-inch diameter, Si samples (''gap length'' of 1.5 cm) have been switched at 36 kV/cm (approx. =54 kV) into an approx.30-..cap omega.. load with a current of 703 A. For GaAs, most samples can withstand, without being triggered, 100 kV/cm. At low electric fields the GaAs samples behave as switches that close during the laser pulse and then open in nanoseconds. At high voltages GaAs does not open. In this mode, called lock-on, up to 42.7 kV/cm (64.1 kV) has been switched. The lock-on mode can be triggered with small laser powers. Plans are being made to use large arrays of GaAs samples to switch 1 MV and 156 kA.

  10. Task Switching versus Cue Switching: Using Transition Cuing to Disentangle Sequential Effects in Task-Switching Performance

    ERIC Educational Resources Information Center

    Schneider, Darryl W.; Logan, Gordon D.

    2007-01-01

    Recent methodological advances have allowed researchers to address confounds in the measurement of task-switch costs in task-switching performance by dissociating cue switching from task switching. For example, in the transition-cuing procedure, which involves presenting cues for task transitions rather than for tasks, cue transitions (cue…

  11. Hobetron current regulating switch tube

    SciTech Connect

    True, R.B.; Hansen, R.J.; Deb, D.N.; Good, G.R.; Reass, W.A.

    1999-07-01

    This paper describes a novel high power electron tube that can hold off voltages up to hundreds of kilovolts, and switch hundreds of amps of current. They call the divide the Hobertron since it utilizes a hollow electron beam. Unlike magnetron injection gun (MIG) switch tubes, it does not require a magnet. Further, it uses nonintercepting control laments, and a dispenser cathode for long life and reliability. Finally, it features a double walled Faraday cage collector for high power dissipation capability. Current is very tightly controlled against changes in voltage across the switch (it is an almost perfect pentode), thus this tube is ideally suited for direct series switching applications. In the paper, various Hobertron designs, and the computer codes and methods used to create them, will be described.

  12. Polarization switching in ferroelectric cathodes

    SciTech Connect

    Rosenman, G.; Shur, D.; Garb, K.; Cohen, R.; Krasik, Y.E.

    1997-07-01

    A new mechanism of polarization switching and electron emission in ferroelectric cathodes is proposed. Surface flashover plasma of a ferroelectric origin was observed on a polar ferroelectric surface [D. Shur, G. Rosenman, and Ya. E. Krasik, Appl. Phys. Lett. {bold 70}, 574 (1997)]. Simultaneous measurements of switched charge and plasma density show that expanding surface plasma represents a dynamic switching electrode. Direct measurements of ion/electron emission currents and surface analysis implemented by different analytic tools indicate that electrons and ions from the surface plasma contribute to spontaneous polarization screening. The high energy of charged particles emitted from the surface plasma is ascribed to a high surface potential during polarization switching. {copyright} {ital 1997 American Institute of Physics.}

  13. Biomolecular switches: Driven to peak

    NASA Astrophysics Data System (ADS)

    Tu, Yuhai

    2017-07-01

    A curious peak in the distribution describing stochastic switching in bacterial motility had researchers confounded. But a careful study performed under varying mechanical conditions has now revealed that the breaking of detailed balance is to blame.

  14. World progress in electronic switching. Part 2: Analysis of current trends

    NASA Astrophysics Data System (ADS)

    Lucas, P.

    1980-03-01

    Systems developed in industrialized countries are reviewed and current trends in electronic switching are analyzed. Basic structural principles are defined: stored program control, standardization of languages, digital techniques and integrated networks, information interchange (signalling and data transmission), distribution network, data switching, message switching. Improvements in microelectronics (integrated circuitry and microprocessors) are considered along with architectures, and methods for both networks and systems. Modular design at function level, increased compatibility, and distributed control are discussed including a standardized approach to new services, centralized maintenance facilities, and dynamic network management.

  15. High-performance optoelectronic switching network with vertical-cavity surface-emitting laser arrays

    SciTech Connect

    Fyodorov, V B

    2003-03-31

    A schematic solution is proposed for creating a highly efficient switching network with fully connected switching topology for use in supercomputers and telecommunication systems. An important characteristic of this solution is the use of vertical-cavity surface-emitting semiconductor laser arrays and polarising beamsplitters. Estimates show that the commercially available elemental base can be used for a practical realisation of an optoelectronic switching network with basic parameters and functional properties that are superior to those in known electronic analogues. (laser applications and other topics in quantum electronics)

  16. Magnetically insulated opening switch research

    NASA Astrophysics Data System (ADS)

    McGeoch, M. W.; Kraft, R.

    1987-01-01

    We examine the feasibility of an opening switch concept based on magnetic insulation in a coaxial thermionic diode. It is found that the impedance ratio between closed and open states of the diode is marginal for efficient energy transfer via this type of switch. The open, or insulated state of the diode is characterized by current leakage across the magnetic field which is associated with the presence of plasma waves.

  17. High PRF high current switch

    DOEpatents

    Moran, Stuart L.; Hutcherson, R. Kenneth

    1990-03-27

    A triggerable, high voltage, high current, spark gap switch for use in pu power systems. The device comprises a pair of electrodes in a high pressure hydrogen environment that is triggered by introducing an arc between one electrode and a trigger pin. Unusually high repetition rates may be obtained by undervolting the switch, i.e., operating the trigger at voltages much below the self-breakdown voltage of the device.

  18. A Piezoelectric Cryogenic Heat Switch

    NASA Technical Reports Server (NTRS)

    Jahromi, Amir E.; Sullivan, Dan F.

    2014-01-01

    We have measured the thermal conductance of a mechanical heat switch actuated by a piezoelectric positioner, the PZHS (PieZo electric Heat Switch), at cryogenic temperatures. The thermal conductance of the PZHS was measured between 4 K and 10 K, and on/off conductance ratios greater than 100 were achieved when the positioner applied its maximum force of 8 N. We discuss the advantages of using this system in cryogenic applications, and estimate the ultimate performance of an optimized PZHS.

  19. RF MEMS Switches with SiC Microbridges for Improved Reliability

    NASA Technical Reports Server (NTRS)

    Scardelletti, Maximilian C.; Zorman, Christian A.; Oldham, Daniel R.

    2008-01-01

    Radio frequency (RF) microelectromechanical (MEMS) switches offer superior performance when compared to the traditional semiconductor devices such as PIN diodes or GaAs transistors. MEMS switches have a return loss (RL) better than -25 dB, negligible insertion loss (IL), isolation better than -30 dB, and near zero power consumption. However, RF MEMS switches have several drawbacks the most serious being long-term reliability. The ability for the switch to operate for millions or even billions of cycles is a major concern and must be addressed. MEMS switches are basically grouped in two categories, capacitive and metal-to-metal contact. The capacitive type switch consists of a movable metal bridge spanning a fixed electrode and separated by a narrow air gap and thin insulating material. The metal-to-metal contact type utilizes the same basic design but without the insulating material. After prolonged operation the metal bridges, in most of these switches, begin to sag and eventually fail to actuate. For the metal-to-metal type, the two metal layers may actually fuse together. Also if the switches are not packaged properly or protected from the environment moisture may build up and cause stiction between the top and bottom electrodes rendering them useless. Many MEMS switch designs have been developed and most illustrate fairly good RF characteristics. Nevertheless very few have demonstrated both great RF performance and ability to perform millions/billions of switching cycles. Of these, nearly all are of metal-to-metal type so as the frequency increases RF performance decreases.

  20. Asymmetry in mechanical polarization switching

    NASA Astrophysics Data System (ADS)

    Lu, Haidong; Liu, Shi; Ye, Ziyu; Yasui, Shintaro; Funakubo, Hiroshi; Rappe, Andrew M.; Gruverman, Alexei

    2017-05-01

    Recent demonstration of a mechanical 180° switching of ferroelectric polarization has enabled an alternative polarization control mechanism based on the flexoelectric coupling between polarization and strain gradient. Mechanical switching is a highly asymmetric phenomenon associated with the inhomogeneous strain induced by an atomic force microscope (AFM) tip pressed against the ferroelectric surface. Here, we demonstrate the asymmetric domain switching behavior in the vicinity of the 180° domain wall in PbTiO3 thin films with respect to the AFM tip scanning direction. The writing-direction-dependent asymmetric domain response has been modeled by molecular dynamics simulation showing asymmetry in domain wall displacement due to the difference in the volume of mechanically switched domains. The obtained results show that the mechanically induced switching dynamics is very different from the conventional 180° switching realized by an external electric field and has to be exploited differently. In particular, nanoscale domain engineering via the tip-induced flexoelectric effect requires careful consideration of asymmetric interaction between the existing domain structures and the strain gradient.

  1. K-Band Latching Switches

    NASA Technical Reports Server (NTRS)

    Piotrowski, W. S.; Raue, J. E.

    1984-01-01

    Design, development, and tests are described for two single-pole-double-throw latching waveguide ferrite switches: a K-band switch in WR-42 waveguide and a Ka-band switch in WR-28 waveguide. Both switches have structurally simple junctions, mechanically interlocked without the use of bonding materials; they are impervious to the effects of thermal, shock, and vibration stresses. Ferrite material for the Ka-band switch with a proper combination of magnetic and dielectric properties was available and resulted in excellent low loss, wideband performance. The high power handling requirement of the K-band switch limited the choice of ferrite to nickel-zinc compositions with adequate magnetic properties, but with too low relative dielectric constant. The relative dielectric constant determines the junction dimensions for given frequency responses. In this case the too low value unavoidably leads to a larger than optimum junction volume, increasing the insertion loss and restricting the operating bandwidth. Efforts to overcome the materials-related difficulties through the design of a composite junction with increased effective dielectric properties efforts to modify the relative dielectric constant of nickel-zinc ferrite are examined.

  2. Vanadium dioxide phase change switches

    NASA Astrophysics Data System (ADS)

    Field, M.; Hillman, C.; Stupar, P.; Hacker, J.; Griffith, Z.; Lee, K.-J.

    2015-05-01

    The thermally driven metal insulator transition in vanadium dioxide (VO2) is used to create a low loss millimeter wave switch which operates up to and beyond W-band frequencies. We have built RF switches using vanadium dioxide thin films fabricated within a section of inverted transmission line with integrated on chip heaters to provide local thermal control. On heating the films above the metal insulator transition we obtain record low switch insertion loss of 0.13 dB at 50 GHz and 0.5 dB at 110 GHz. The switch cut-off frequency is high, fc ~ 45 THz, due to the low on state resistance and off state capacitance. We have investigated the device physics of these switches including self-latching of the devices under high RF powers, and demonstrated their integration with silicon germanium RF circuits where the switch heater current sources and control logic are also integrated into the same silicon germanium circuit.

  3. K-band latching switches

    NASA Astrophysics Data System (ADS)

    Piotrowski, W. S.; Raue, J. E.

    1984-05-01

    Design, development, and tests are described for two single-pole-double-throw latching waveguide ferrite switches: a K-band switch in WR-42 waveguide and a Ka-band switch in WR-28 waveguide. Both switches have structurally simple junctions, mechanically interlocked without the use of bonding materials; they are impervious to the effects of thermal, shock, and vibration stresses. Ferrite material for the Ka-band switch with a proper combination of magnetic and dielectric properties was available and resulted in excellent low loss, wideband performance. The high power handling requirement of the K-band switch limited the choice of ferrite to nickel-zinc compositions with adequate magnetic properties, but with too low relative dielectric constant. The relative dielectric constant determines the junction dimensions for given frequency responses. In this case the too low value unavoidably leads to a larger than optimum junction volume, increasing the insertion loss and restricting the operating bandwidth. Efforts to overcome the materials-related difficulties through the design of a composite junction with increased effective dielectric properties efforts to modify the relative dielectric constant of nickel-zinc ferrite are examined.

  4. 14 CFR 29.1145 - Ignition switches.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Ignition switches. 29.1145 Section 29.1145... switches. (a) Ignition switches must control each ignition circuit on each engine. (b) There must be means to quickly shut off all ignition by the grouping of switches or by a master ignition control....

  5. 14 CFR 25.1145 - Ignition switches.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Ignition switches. 25.1145 Section 25.1145... switches. (a) Ignition switches must control each engine ignition circuit on each engine. (b) There must be means to quickly shut off all ignition by the grouping of switches or by a master ignition control....

  6. 14 CFR 25.1145 - Ignition switches.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Ignition switches. 25.1145 Section 25.1145... switches. (a) Ignition switches must control each engine ignition circuit on each engine. (b) There must be means to quickly shut off all ignition by the grouping of switches or by a master ignition control....

  7. 14 CFR 29.1145 - Ignition switches.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Ignition switches. 29.1145 Section 29.1145... switches. (a) Ignition switches must control each ignition circuit on each engine. (b) There must be means to quickly shut off all ignition by the grouping of switches or by a master ignition control....

  8. Working Memory Costs of Task Switching

    ERIC Educational Resources Information Center

    Liefooghe, Baptist; Barrouillet, Pierre; Vandierendonck, Andre; Camos, Valerie

    2008-01-01

    Although many accounts of task switching emphasize the importance of working memory as a substantial source of the switch cost, there is a lack of evidence demonstrating that task switching actually places additional demands on working memory. The present study addressed this issue by implementing task switching in continuous complex span tasks…

  9. Working Memory Costs of Task Switching

    ERIC Educational Resources Information Center

    Liefooghe, Baptist; Barrouillet, Pierre; Vandierendonck, Andre; Camos, Valerie

    2008-01-01

    Although many accounts of task switching emphasize the importance of working memory as a substantial source of the switch cost, there is a lack of evidence demonstrating that task switching actually places additional demands on working memory. The present study addressed this issue by implementing task switching in continuous complex span tasks…

  10. 14 CFR 29.1145 - Ignition switches.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Ignition switches. 29.1145 Section 29.1145... switches. (a) Ignition switches must control each ignition circuit on each engine. (b) There must be means to quickly shut off all ignition by the grouping of switches or by a master ignition control....

  11. 14 CFR 29.1145 - Ignition switches.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Ignition switches. 29.1145 Section 29.1145... switches. (a) Ignition switches must control each ignition circuit on each engine. (b) There must be means to quickly shut off all ignition by the grouping of switches or by a master ignition control....

  12. 14 CFR 29.1145 - Ignition switches.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Ignition switches. 29.1145 Section 29.1145... switches. (a) Ignition switches must control each ignition circuit on each engine. (b) There must be means to quickly shut off all ignition by the grouping of switches or by a master ignition control....

  13. 14 CFR 25.1145 - Ignition switches.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Ignition switches. 25.1145 Section 25.1145... switches. (a) Ignition switches must control each engine ignition circuit on each engine. (b) There must be means to quickly shut off all ignition by the grouping of switches or by a master ignition control....

  14. 14 CFR 25.1145 - Ignition switches.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Ignition switches. 25.1145 Section 25.1145... switches. (a) Ignition switches must control each engine ignition circuit on each engine. (b) There must be means to quickly shut off all ignition by the grouping of switches or by a master ignition control....

  15. Basic lubrication equations

    NASA Technical Reports Server (NTRS)

    Hamrock, B. J.; Dowson, D.

    1981-01-01

    Lubricants, usually Newtonian fluids, are assumed to experience laminar flow. The basic equations used to describe the flow are the Navier-Stokes equation of motion. The study of hydrodynamic lubrication is, from a mathematical standpoint, the application of a reduced form of these Navier-Stokes equations in association with the continuity equation. The Reynolds equation can also be derived from first principles, provided of course that the same basic assumptions are adopted in each case. Both methods are used in deriving the Reynolds equation, and the assumptions inherent in reducing the Navier-Stokes equations are specified. Because the Reynolds equation contains viscosity and density terms and these properties depend on temperature and pressure, it is often necessary to couple the Reynolds with energy equation. The lubricant properties and the energy equation are presented. Film thickness, a parameter of the Reynolds equation, is a function of the elastic behavior of the bearing surface. The governing elasticity equation is therefore presented.

  16. Basic Emotions: A Reconstruction

    PubMed Central

    Mason, William A.; Capitanio, John P.

    2016-01-01

    Emotionality is a basic feature of behavior. The argument over whether the expression of emotions is based primarily on culture (constructivism, nurture) or biology (natural forms, nature) will never be resolved because both alternatives are untenable. The evidence is overwhelming that at all ages and all levels of organization, the development of emotionality is epigenetic: The organism is an active participant in its own development. To ascribe these effects to “experience” was the best that could be done for many years. With the rapid acceleration of information on how changes in organization are actually brought about, it is a good time to review, update, and revitalize our views of experience in relation to the concept of basic emotion. PMID:27110280

  17. Basics of Biosafety

    NASA Technical Reports Server (NTRS)

    Wong, Willy

    2009-01-01

    This slide presentation reviews the basics of biosafety and the importance of assuring proper biosafety practices. The objectives of the presentation are to review regulations about biosafety, and the different biosafety levels; the biosafety facilities at Johnson Space Center; the usage and maintenance of the biosafety cabinet, the proper methods to handle biologically hazardous materials upon exposure, and the methods of cleanup in the event of a spill, and the training requirements that are mandated for personnel handling biologically hazardous materials.

  18. Risk communication basics

    SciTech Connect

    Corrado, P.G.

    1995-12-31

    In low-trust, high-concern situations, 50% of your credibility comes from perceived empathy and caring, demonstrated in the first 30 s you come in contact with someone. There is no second chance for a first impression. These and other principles contained in this paper provide you with a basic level of understanding of risk communication. The principles identified are time-tested caveats and will assist you in effectively communicating technical information.

  19. Basic Research Plan.

    DTIC Science & Technology

    1996-05-01

    funded by the Defense Advanced Research Projects Agency (DARPA) more than twenty years ago led to the evolution of the Internet. Likewise, molecular...for detection/classification Acoustic imaging in shallow water Ray chaos models Acoustic holography 4 -6 4.2 Chemistry Chemistry research directly...strength, high-ductility structural materials. 4 -38 Table 4.8.1. Basic Research Funding for Terrestrial Sciences ($ Mllions ) Program Element Service

  20. Basic confocal microscopy.

    PubMed

    Smith, Carolyn L

    2008-01-01

    This unit introduces the reader to the basic principles of confocal microscopy and the design and capabilities of current confocal microscopes. The advantages and disadvantages of confocal microscopy compared to other techniques for fluorescence imaging are described. There are also practical guidelines for sample preparation and optimization of imaging parameters, as well as examples of some of the applications of confocal microscopy. (c) 2008 by John Wiley & Sons, Inc.

  1. The Basic Anaesthesia Machine

    PubMed Central

    Gurudatt, CL

    2013-01-01

    After WTG Morton's first public demonstration in 1846 of use of ether as an anaesthetic agent, for many years anaesthesiologists did not require a machine to deliver anaesthesia to the patients. After the introduction of oxygen and nitrous oxide in the form of compressed gases in cylinders, there was a necessity for mounting these cylinders on a metal frame. This stimulated many people to attempt to construct the anaesthesia machine. HEG Boyle in the year 1917 modified the Gwathmey's machine and this became popular as Boyle anaesthesia machine. Though a lot of changes have been made for the original Boyle machine still the basic structure remains the same. All the subsequent changes which have been brought are mainly to improve the safety of the patients. Knowing the details of the basic machine will make the trainee to understand the additional improvements. It is also important for every practicing anaesthesiologist to have a thorough knowledge of the basic anaesthesia machine for safe conduct of anaesthesia. PMID:24249876

  2. The basic anaesthesia machine.

    PubMed

    Gurudatt, Cl

    2013-09-01

    After WTG Morton's first public demonstration in 1846 of use of ether as an anaesthetic agent, for many years anaesthesiologists did not require a machine to deliver anaesthesia to the patients. After the introduction of oxygen and nitrous oxide in the form of compressed gases in cylinders, there was a necessity for mounting these cylinders on a metal frame. This stimulated many people to attempt to construct the anaesthesia machine. HEG Boyle in the year 1917 modified the Gwathmey's machine and this became popular as Boyle anaesthesia machine. Though a lot of changes have been made for the original Boyle machine still the basic structure remains the same. All the subsequent changes which have been brought are mainly to improve the safety of the patients. Knowing the details of the basic machine will make the trainee to understand the additional improvements. It is also important for every practicing anaesthesiologist to have a thorough knowledge of the basic anaesthesia machine for safe conduct of anaesthesia.

  3. Electronic logic for enhanced switch reliability

    DOEpatents

    Cooper, J.A.

    1984-01-20

    A logic circuit is used to enhance redundant switch reliability. Two or more switches are monitored for logical high or low output. The output for the logic circuit produces a redundant and fail-safe representation of the switch outputs. When both switch outputs are high, the output is high. Similarly, when both switch outputs are low, the logic circuit's output is low. When the output states of the two switches do not agree, the circuit resolves the conflict by memorizing the last output state which both switches were simultaneously in and produces the logical complement of this output state. Thus, the logic circuit of the present invention allows the redundant switches to be treated as if they were in parallel when the switches are open and as if they were in series when the switches are closed. A failsafe system having maximum reliability is thereby produced.

  4. Non-latching relay switch assembly

    DOEpatents

    Duimstra, Frederick A.

    1991-01-01

    A non-latching relay switch assembly which includes a coil section and a switch or contact section. The coil section includes a permanent magnet and an electromagnet. The respective sections are arranged in separate locations or cavities in the assembly. The switch has a "normal" position and is selectively switched by an overriding electromagnetic assembly. The switch returns to the "normal" position when the overriding electromagnetic assembly is inactive.

  5. Candida and invasive candidiasis: back to basics.

    PubMed

    Lim, C S-Y; Rosli, R; Seow, H F; Chong, P P

    2012-01-01

    The ubiquitous Candida spp. is an opportunistic fungal pathogen which, despite treatment with antifungal drugs, can cause fatal bloodstream infections (BSIs) in immunocompromised and immunodeficient persons. Thus far, several major C. albicans virulence factors have been relatively well studied, including morphology switching and secreted degradative enzymes. However, the exact mechanism of Candida pathogenesis and the host response to invasion are still not well elucidated. The relatively recent discovery of the quorum-sensing molecule farnesol and the existence of quorum sensing as a basic regulatory phenomenon of the C. albicans population behavior has revolutionized Candida research. Through population density regulation, the quorum-sensing mechanism also controls the cellular morphology of a C. albicans population in response to environmental factors, thereby, effectively placing morphology switching downstream of quorum sensing. Thus, the quorum-sensing phenomenon has been hailed as the 'missing piece' of the pathogenicity puzzle. Here, we review what is known about Candida spp. as the etiological agents of invasive candidiasis and address our current understanding of the quorum-sensing phenomenon in relation to virulence in the host.

  6. High speed packet switching

    NASA Technical Reports Server (NTRS)

    1991-01-01

    This document constitutes the final report prepared by Proteon, Inc. of Westborough, Massachusetts under contract NAS 5-30629 entitled High-Speed Packet Switching (SBIR 87-1, Phase 2) prepared for NASA-Greenbelt, Maryland. The primary goal of this research project is to use the results of the SBIR Phase 1 effort to develop a sound, expandable hardware and software router architecture capable of forwarding 25,000 packets per second through the router and passing 300 megabits per second on the router's internal busses. The work being delivered under this contract received its funding from three different sources: the SNIPE/RIG contract (Contract Number F30602-89-C-0014, CDRL Sequence Number A002), the SBIR contract, and Proteon. The SNIPE/RIG and SBIR contracts had many overlapping requirements, which allowed the research done under SNIPE/RIG to be applied to SBIR. Proteon funded all of the work to develop new router interfaces other than FDDI, in addition to funding the productization of the router itself. The router being delivered under SBIR will be a fully product-quality machine. The work done during this contract produced many significant findings and results, summarized here and explained in detail in later sections of this report. The SNIPE/RIG contract was completed. That contract had many overlapping requirements with the SBIR contract, and resulted in the successful demonstration and delivery of a high speed router. The development that took place during the SNIPE/RIG contract produced findings that included the choice of processor and an understanding of the issues surrounding inter processor communications in a multiprocessor environment. Many significant speed enhancements to the router software were made during that time. Under the SBIR contract (and with help from Proteon-funded work), it was found that a single processor router achieved a throughput significantly higher than originally anticipated. For this reason, a single processor router was

  7. Analysis of a novel double driving signal line and driving electrodes separated RF MEMS switch

    NASA Astrophysics Data System (ADS)

    Chen, Zhiqiang; Tian, Wenchao; Zhang, Xiaotong

    2017-04-01

    A novel double driving signal line and driving electrodes separated radio frequency (RF) micro-electromechanical system (MEMS) switch was proposed in this paper to overcome the problems of the high actuation voltage, small displacement, and long pull-down time of the RF MEMS switches. Dynamic equations of the micro beam were built based on the small deflection theory. Dynamic behaviors of the proposed RF MEMS switch were analyzed and calculated by the variable separation method. The effects of different driving voltages, structure parameters and materials on the RF MEMS switch performance were discussed in detail. The simulation results presented that the proposed RF MEMS switch had an actuation voltage of 26 V, a pull-down time of 31.5 μs and an actuation displacement of 3 μm. The results also showed that the pull-down time of micro beam increased as the dielectric layer thickness increased. When the beam thickness was higher than 1.1 μm, the switch could not pull down anymore. Additionally, the switch had a lowest pull down time when Al was used as micro beam material, compared to Au, Si, and SiC. The COMSOL Multiphysics finite element analysis was carried out to validate the MATLAB simulation results, and the comparison results were basically consistent with the MATLAB simulation results. Besides, the proposed switch had an insertion loss of -0.2 dB on up-state and isolation of more than -20 dB on down-state at 60 GHz derived from the electromagnetic simulation results. The actuation voltage, pull-down time, actuation displacement, and electromagnetic performances of the proposed RF MEMS switch were compared to some other switches, which were better than some existing switches.

  8. Switching Oxide Traps

    NASA Technical Reports Server (NTRS)

    Oldham, Timothy R.

    2003-01-01

    We consider radiation-induced charge trapping in SiO2 dielectric layers, primarily from the point of view of CMOS devices. However, SiO2 insulators are used in many other ways, and the same defects occur in other contexts. The key studies, which determined the nature of the oxide charge traps, were done primarily on gate oxides in CMOS devices, because that was the main radiation problem in CMOS at one time. There are two major reviews of radiation-induced oxide charge trapping already in the literature, which discuss the subject in far greater detail than is possible here. The first of these was by McLean et al. in 1989, and the second, ten years later, was intended as an update, because of additional, new work that had been reported. Basically, the picture that has emerged is that ionizing radiation creates electron-hole pairs in the oxide, and the electrons have much higher mobility than the holes. Therefore, the electrons are swept out of the oxide very rapidly by any field that is present, leaving behind any holes that escape the initial recombination process. These holes then undergo a polaron hopping transport toward the Si/SiO2 interface (under positive bias). Near the interface, some fraction of them fall into deep, relatively stable, long-lived hole traps. The nature and annealing behavior of these hole traps is the main focus of this paper.

  9. Wide Bandgap Extrinsic Photoconductive Switches

    NASA Astrophysics Data System (ADS)

    Sullivan, James Stephen

    Wide Bandgap Extrinsic Photoconductive Switches Semi-insulating Gallium Nitride, 4H and 6H Silicon Carbide are attractive materials for compact, high voltage, extrinsic, photoconductive switches due to their wide bandgap, high dark resistance, high critical electric field strength and high electron saturation velocity. These wide bandgap semiconductors are made semi-insulating by the addition of vanadium (4H and 6H-SiC) and iron (2H-GaN) impurities that form deep acceptors. These deep acceptors trap electrons donated from shallow donor impurities. The electrons can be optically excited from these deep acceptor levels into the conduction band to transition the wide bandgap semiconductor materials from a semi-insulating to a conducting state. Extrinsic photoconductive switches with opposing electrodes have been constructed using vanadium compensated 6H-SiC and iron compensated 2H-GaN. These extrinsic photoconductive switches were tested at high voltage and high power to determine if they could be successfully used as the closing switch in compact medical accelerators. The successful development of a vanadium compensated, 6H-SiC extrinsic photoconductive switch for use as a closing switch for compact accelerator applications was realized by improvements made to the vanadium, nitrogen and boron impurity densities. The changes made to the impurity densities were based on the physical intuition outlined and simple rate equation models. The final 6H-SiC impurity 'recipe' calls for vanadium, nitrogen and boron densities of 2.5 e17 cm-3, 1.25e17 cm-3 and ≤ 1e16 cm-3, respectively. This recipe was originally developed to maximize the quantum efficiency of the vanadium compensated 6H-SiC, while maintaining a thermally stable semi-insulating material. The rate equation models indicate that, besides increasing the quantum efficiency, the impurity recipe should be expected to also increase the carrier recombination time. Three generations of 6H-SiC materials were tested. The

  10. Photoresistance switching of plasmonic nanopores.

    PubMed

    Li, Yi; Nicoli, Francesca; Chen, Chang; Lagae, Liesbet; Groeseneken, Guido; Stakenborg, Tim; Zandbergen, Henny W; Dekker, Cees; Van Dorpe, Pol; Jonsson, Magnus P

    2015-01-14

    Fast and reversible modulation of ion flow through nanosized apertures is important for many nanofluidic applications, including sensing and separation systems. Here, we present the first demonstration of a reversible plasmon-controlled nanofluidic valve. We show that plasmonic nanopores (solid-state nanopores integrated with metal nanocavities) can be used as a fluidic switch upon optical excitation. We systematically investigate the effects of laser illumination of single plasmonic nanopores and experimentally demonstrate photoresistance switching where fluidic transport and ion flow are switched on or off. This is manifested as a large (∼ 1-2 orders of magnitude) increase in the ionic nanopore resistance and an accompanying current rectification upon illumination at high laser powers (tens of milliwatts). At lower laser powers, the resistance decreases monotonically with increasing power, followed by an abrupt transition to high resistances at a certain threshold power. A similar rapid transition, although at a lower threshold power, is observed when the power is instead swept from high to low power. This hysteretic behavior is found to be dependent on the rate of the power sweep. The photoresistance switching effect is attributed to plasmon-induced formation and growth of nanobubbles that reversibly block the ionic current through the nanopore from one side of the membrane. This explanation is corroborated by finite-element simulations of a nanobubble in the nanopore that show the switching and the rectification.

  11. Basic Hitchhiker Payload Requirements

    NASA Technical Reports Server (NTRS)

    Horan, Stephen

    1999-01-01

    This document lists the requirements for the NMSU Hitchhiker experiment payload that were developed as part of the EE 498/499 Capstone Design class during the 1999-2000 academic year. This document is used to describe the system needs as described in the mission document. The requirements listed here are those primarily used to generate the basic electronic and data processing requirements developed in the class design document. The needs of the experiment components are more fully described in the draft NASA hitchhiker customer requirements document. Many of the details for the overall payload are given in full detail in the NASA hitchhiker documentation.

  12. Study design: the basics.

    PubMed

    Lim, Hyun Ja; Hoffmann, Raymond G

    2007-01-01

    In biomedical research, meaningful conclusions can only be drawn based on data collected from a valid scientific design using appropriate statistical methods. Therefore, the selection of an appropriate study design is important in order to provide an unbiased and scientific evaluation of the research questions. In this chapter, the different kinds of experimental studies commonly used in biology and medicine are introduced. A brief survey of basic experimental study designs, randomization, blinding, possible biases, issues in data analysis, and interpretation of the study results are mainly provided.

  13. Switching from approach to withdrawal is easier than vice versa.

    PubMed

    Kuhbandner, Christof; Vogel, Carina M; Lichtenfeld, Stephanie

    2015-01-01

    A fundamental property of emotional responses is a change in action tendencies that allow the individual to cope with the situation. Most basically, there are two types of behaviour one can switch to when responding emotionally: approach or withdrawal. The present study examined whether the ability to switch to approach or withdrawal depends on the type of behaviour shown before. Using familiar (Experiment 1) and unfamiliar (Experiment 2) neutral stimuli, we first show that switching from approach to withdrawal is generally easier than vice versa. In Experiment 3, we demonstrate that this holds true even when participants respond to emotional stimuli that typically elicit strong approach or withdrawal tendencies. These results indicate that there is a fundamental asymmetry in the ability to switch from approach to withdrawal or vice versa. As shown in Experiment 3, this asymmetry may represent a serious confound in many previous studies examining the link between stimulus valence and associated action tendencies, suggesting that the link between positive stimuli and approach tendencies may be stronger, and the link between negative stimuli and withdrawal tendencies weaker, than previously believed.

  14. HOLLOTRON switch for megawatt lightweight space inverters

    NASA Technical Reports Server (NTRS)

    Poeschel, R. L.; Goebel, D. M.; Schumacher, R. W.

    1991-01-01

    The feasibility of satisfying the switching requirements for a megawatt ultralight inverter system using HOLLOTRON switch technology was determined. The existing experimental switch hardware was modified to investigate a coaxial HOLLOTRON switch configuration and the results were compared with those obtained for a modified linear HOLLOTRON configuration. It was concluded that scaling the HOLLOTRON switch to the current and voltage specifications required for a megawatt converter system is indeed feasible using a modified linear configuration. The experimental HOLLOTRON switch operated at parameters comparable to the scaled coaxial HOLLOTRON. However, the linear HOLLOTRON data verified the capability for meeting all the design objectives simultaneously including current density (greater than 2 A/sq cm), voltage (5 kV), switching frequency (20 kHz), switching time (300 ns), and forward voltage drop (less than or equal to 20 V). Scaling relations were determined and a preliminary design was completed for an engineering model linear HOLLOTRON switch to meet the megawatt converter system specifications.

  15. Basic and clinical immunology

    NASA Technical Reports Server (NTRS)

    Chinen, Javier; Shearer, William T.

    2003-01-01

    Progress in immunology continues to grow exponentially every year. New applications of this knowledge are being developed for a broad range of clinical conditions. Conversely, the study of primary and secondary immunodeficiencies is helping to elucidate the intricate mechanisms of the immune system. We have selected a few of the most significant contributions to the fields of basic and clinical immunology published between October 2001 and October 2002. Our choice of topics in basic immunology included the description of T-bet as a determinant factor for T(H)1 differentiation, the role of the activation-induced cytosine deaminase gene in B-cell development, the characterization of CD4(+)CD25(+) regulatory T cells, and the use of dynamic imaging to study MHC class II transport and T-cell and dendritic cell membrane interactions. Articles related to clinical immunology that were selected for review include the description of immunodeficiency caused by caspase 8 deficiency; a case series report on X-linked agammaglobulinemia; the mechanism of action, efficacy, and complications of intravenous immunoglobulin; mechanisms of autoimmunity diseases; and advances in HIV pathogenesis and vaccine development. We also reviewed two articles that explore the possible alterations of the immune system caused by spaceflights, a new field with increasing importance as human space expeditions become a reality in the 21st century.

  16. Basic and clinical immunology

    NASA Technical Reports Server (NTRS)

    Chinen, Javier; Shearer, William T.

    2003-01-01

    Progress in immunology continues to grow exponentially every year. New applications of this knowledge are being developed for a broad range of clinical conditions. Conversely, the study of primary and secondary immunodeficiencies is helping to elucidate the intricate mechanisms of the immune system. We have selected a few of the most significant contributions to the fields of basic and clinical immunology published between October 2001 and October 2002. Our choice of topics in basic immunology included the description of T-bet as a determinant factor for T(H)1 differentiation, the role of the activation-induced cytosine deaminase gene in B-cell development, the characterization of CD4(+)CD25(+) regulatory T cells, and the use of dynamic imaging to study MHC class II transport and T-cell and dendritic cell membrane interactions. Articles related to clinical immunology that were selected for review include the description of immunodeficiency caused by caspase 8 deficiency; a case series report on X-linked agammaglobulinemia; the mechanism of action, efficacy, and complications of intravenous immunoglobulin; mechanisms of autoimmunity diseases; and advances in HIV pathogenesis and vaccine development. We also reviewed two articles that explore the possible alterations of the immune system caused by spaceflights, a new field with increasing importance as human space expeditions become a reality in the 21st century.

  17. Basic space payload fastener

    NASA Technical Reports Server (NTRS)

    Vranish, J. M.; Gorevan, Stephen

    1995-01-01

    A new basic space fastener has been developed and tested by the GSFC. The purposes of this fastener are to permit assembly and servicing in space by astronauts and/or robots and to facilitate qualification of payloads on Earth prior to launch by saving time and money during the systems integration and component testing and qualification processes. The space fastener is a rework of the basic machine screw such that crossthreading is impossible; it is self-locking and will not work its way out during launch (vibration proof); it will not wear out despite repeated use; it occupies a small foot print which is comparable to its machine screw equivalent, and it provides force and exhibits strength comparable to its machine screw equivalent. Construction is ultra-simple and cost effective and the principle is applicable across the full range of screw sizes ranging from a #10 screw to 2.5 cm (1 in) or more. In this paper, the fastener principles of operation will be discussed along with test results and construction details. The new fastener also has considerable potential in the commercial sector. A few promising applications will be presented.

  18. Adaptive optical label packet switching

    NASA Astrophysics Data System (ADS)

    Xiao, Shilin; Liu, Zhixin; Liang, Zheng; Zhao, Zhihui; Qu, Kefeng

    2007-11-01

    This paper introduces a kind of Adaptive Optical Label Packet Switching (AOLPS) technology. Based on Optical Packet Switching (OPS), AOLPS uses optical label to achieve self-routing, and the size of optical packet is self-adaptive. At the edge nodes, IP packets are fist classified into different first-in-fist-out memories (FIFOs) according to their priority levels and destinations, and then being encapsulated into optical packets. The traffic at each FIFO is real-time monitored, and the controller in edge node employs an optimal strategy to generate suitable sized packets for transmission. Large sized packets will be adopted when traffic is heavy, and small sized packets will be used when traffic is light. This self-adaptive switching granularity can greatly improve the network performance.

  19. Cross-switched MICRAD seeker

    NASA Astrophysics Data System (ADS)

    Alpers, Frederick C.; Hoover, Mervyn C.

    1992-11-01

    A MICrowave RADiometric (MICRAD) guidance system is disclosed which utilizes an antenna having four beams. The beams are designated right, left, up, and down. Information from the four beams is monitored essentially 100 percent of the time by passing through appropriate ferrite cross-switching means to four separate receivers. Information from two of the receivers passes through a first multiplexer and feedback gain balancer to provide a target azimuth output, and information from the remaining two receivers passes through a second multiplexer and feedback gain balancer to provide a target elevation output. A local oscillator heterodynes each of the four receivers in common, and a switch driver couples each of the multiplexers to the ferrite cross-switching means and gain balancers for appropriate selection.

  20. Finite-time quantised feedback asynchronously switched control of sampled-data switched linear systems

    NASA Astrophysics Data System (ADS)

    Wang, Ronghao; Xing, Jianchun; Li, Juelong; Xiang, Zhengrong

    2016-10-01

    This paper studies the problem of stabilising a sampled-data switched linear system by quantised feedback asynchronously switched controllers. The idea of a quantised feedback asynchronously switched control strategy originates in earlier work reflecting actual system characteristic of switching and quantising, respectively. A quantised scheme is designed depending on switching time using dynamic quantiser. When sampling time, system switching time and controller switching time are all not uniform, the proposed switching controllers guarantee the system to be finite-time stable by a piecewise Lyapunov function and the average dwell-time method. Simulation examples are provided to show the effectiveness of the developed results.

  1. Predicting conformational switches in proteins.

    PubMed Central

    Young, M.; Kirshenbaum, K.; Dill, K. A.; Highsmith, S.

    1999-01-01

    We describe a new computational technique to predict conformationally switching elements in proteins from their amino acid sequences. The method, called ASP (Ambivalent Structure Predictor), analyzes results from a secondary structure prediction algorithm to identify regions of conformational ambivalence. ASP identifies ambivalent regions in 16 test protein sequences for which function involves substantial backbone rearrangements. In the test set, all sites previously described as conformational switches are correctly predicted to be structurally ambivalent regions. No such regions are predicted in three negative control protein sequences. ASP may be useful as a guide for experimental studies on protein function and motion in the absence of detailed three-dimensional structural data. PMID:10493576

  2. A piezoelectric cryogenic heat switch.

    PubMed

    Jahromi, Amir E; Sullivan, Dan F

    2014-06-01

    We have measured the thermal conductance of a mechanical heat switch actuated by a piezoelectric positioner, the PZHS (PieZo electric Heat Switch), at cryogenic temperatures. The thermal conductance of the PZHS was measured between 4 K and 10 K, and on/off conductance ratios of about 100-200 at lowest and highest measures temperature were achieved when the positioner applied its maximum force of 8 N, respectively. We discuss the advantages of using this system in cryogenic applications, and estimate the ultimate performance of an ideal PZHS.

  3. Optical switch using Risley prisms

    DOEpatents

    Sweatt, William C.; Christenson, Todd R.

    2003-04-15

    An optical switch using Risley prisms and rotary microactuators to independently rotate the wedge prisms of each Risley prism pair is disclosed. The optical switch comprises an array of input Risley prism pairs that selectively redirect light beams from a plurality of input ports to an array of output Risley prism pairs that similarly direct the light beams to a plurality of output ports. Each wedge prism of each Risley prism pair can be independently rotated by a variable-reluctance stepping rotary microactuator that is fabricated by a multi-layer LIGA process. Each wedge prism can be formed integral to the annular rotor of the rotary microactuator by a DXRL process.

  4. Optical Switch Using Risley Prisms

    DOEpatents

    Sweatt, William C.; Christenson, Todd R.

    2005-02-22

    An optical switch using Risley prisms and rotary microactuators to independently rotate the wedge prisms of each Risley prism pair is disclosed. The optical switch comprises an array of input Risley prism pairs that selectively redirect light beams from a plurality of input ports to an array of output Risley prism pairs that similarly direct the light beams to a plurality of output ports. Each wedge prism of each Risley prism pair can be independently rotated by a variable-reluctance stepping rotary microactuator that is fabricated by a multi-layer LIGA process. Each wedge prism can be formed integral to the annular rotor of the rotary microactuator by a DXRL process.

  5. Switch Using Radio Frequency Identification

    NASA Technical Reports Server (NTRS)

    Fink, Patrick W. (Inventor); Lin, Gregory Y. (Inventor); Kennedy, Timothy F. (Inventor); Ngo, Phong H. (Inventor)

    2015-01-01

    Disclosed is an apparatus for use as a switch. In one embodiment, the switch comprises at least one RFID tag, each RFID tag comprising an antenna element and an RFID integrated circuit, at least one source element, and at least one lever arm. Each lever arm is connected to one of the RFID tags, and each lever arm is capable of two positions. One of the positions places the lever arm and the RFID tag connected thereto into alignment with the source element. Other embodiments are also described.

  6. Bumpless switching control for switched systems with partial actuator failures

    NASA Astrophysics Data System (ADS)

    Qi, Yiwen; Bao, Wen; Zhang, Qingxin; Chang, Juntao

    2016-11-01

    This study is concerned with the bumpless transfer problem for switched systems with partial actuator failures, in order to obtain smooth system performance output transition. Taking into account that the system requires a controller switching from current sub-controller to a fault-tolerant sub-controller after actuator fault. And bumpless transfer for control input cannot be traditionally designed when the actuator fault occurs, while performance smoothing can be considered and it is actually the ultimate goal of bumpless transfer. Specifically, the actuator fault model is firstly established and partial actuator fault is considered. Then, the system performance output signal is deemed as the main design variable of bumpless transfer, and closed-loop control systems both previous and after controller switching are constructed. Moreover, by using model matching thought and the adaptive sliding mode control technique, a bumpless transfer compensator design strategy is given to drive the performance output variable (after controller switching) to track the one of reference model. At last, simulation results of numeric and application examples demonstrate the effectiveness of the proposed bumpless transfer strategy.

  7. Surface flashover threshold and switched fields of photoconductive semiconductor switches

    SciTech Connect

    Loubriel, G.M.; O'Malley, M.W.; Zutavern, F.J.; McKenzie, B.B.; Conley, W.R.

    1988-01-01

    We have shown that Si Photoconductive Semiconductor Switches (PCSS) can be used to switch high voltages (up to 123 kV), high fields (up to 82 kV/cm) and high currents (2.8 kA). The ability of the samples to withstand this type of high voltage, high current switching depends on the way in which the current penetrates the semiconductor. The appropriate use of water or contacts greatly improves the switching capability. We have also shown that the wafers can support large currents (4.0 kA for GaAs and 2.8 kA for Si) and large linear current densities (3.2 kA/cm for GaAs and 1.4 kA/cm for Si). For GaAs this linear current density corresponds to about 1 Ma/cm/sup 2/ given a penetration depth of about 10/sup /minus/3/ cm. 4 refs., 4 figs., 2 tabs.

  8. System for automatically switching transformer coupled lines

    NASA Technical Reports Server (NTRS)

    Dwinell, W. S. (Inventor)

    1979-01-01

    A system is presented for automatically controlling transformer coupled alternating current electric lines. The secondary winding of each transformer is provided with a center tap. A switching circuit is connected to the center taps of a pair of secondary windings and includes a switch controller. An impedance is connected between the center taps of the opposite pair of secondary windings. The switching circuit has continuity when the AC lines are continuous and discontinuity with any disconnect of the AC lines. Normally open switching means are provided in at least one AC line. The switch controller automatically opens the switching means when the AC lines become separated.

  9. Mobile based Appliances switching using Bluetooth

    NASA Astrophysics Data System (ADS)

    Gupta, Sureshchandra J., Dr; Desai, Kalp; Gaikawad, Deepak; Pawar, Vijay N.; Gangal, Devendranath R.

    2008-04-01

    How many times do you have to get up from your desk to switch on your Air conditioner or fan when you are completely into your table work? How many times do you feel lazy to get off your comfort to switch on/off your home appliances in different rooms? How much energy do you lose in a day for operating your appliances? The solution is either a large amount of manual work—or the idea that is presented over here: APP-CON (APP-CON stands for appliances control). Here the ordinary cell phone with bluetooth capability acts as remote designed in such a manner that it acts as a helping hand to human by reducing its manual work and therefore saving human energy. The cell phone control of APP-CON units lets you access many of your home appliances situated in different rooms by using just a single remote from distance. Electronics hobbyists would love to make such a remote control themselves. But they find it difficult due to complex circuitry rather than the high cost because of using a number of frequency counting techniques and decade counters. The APP-CON system given here overcomes the aforesaid problems by using a single microcontroller and moreover a simple program or software for bluetooth enabled cell phone and employing simple coding and decoding of remote signals. Here the mobile based remote control is used to operate a number of home appliances basically consists of Bluetooth technology. The unit consists of a transmitter and a receiver consisting of a microcontroller. The importance of bluetooth technology is that the signal to be transmitted from transmitter to the receiver is done without requiring line of sight.

  10. AH-1S communication switch integration program

    NASA Technical Reports Server (NTRS)

    Haworth, Loran; Szoboszlay, Zoltan; Shively, Robert; Bick, Frank J.

    1989-01-01

    The C-6533/ARC communication system as installed on the test AH-1E Cobra helicopter was modified to allow discrete radio selection of all aircraft radios at the cyclic radio/intercommunication system switch. The current Cobra-fleet use of the C-6533 system is cumbersome, particularly during low-altitude operations. Operationally, the current system C-6533 configuration and design requires the pilot to estimate when he can safely remove his hand from an active flight control to select radios during low-altitude flight. The pilot must then physically remove his hand from the flight control, look inside the cockpit to select and verify the radio selection and then effect the selected radio transmission by activating the radio/ICS switch on the cyclic. This condition is potentially hazardous, especially during low-level flight at night in degraded weather. To improve pilot performance, communications effectiveness, and safety, manprint principles were utilized in the selection of a design modification. The modified C-6533 design was kept as basic as possible for potential Cobra-fleet modification. The communications system was modified and the design was subsequently flight-tested by the U.S. Army Aeroflightdynamics Directorate and NASA at the NASA Ames Research Center, Mountain View, California. The design modification enables the Cobra pilot to maintain hands-on flight controls while selecting radios during nap-of-the-Earth (NOE) flight without looking inside the cockpit which resulted in reduced pilot workload ratings, better pilot handling quality ratings and increased flight safety for the NOE flight environment.

  11. Atomic Basic Blocks

    NASA Astrophysics Data System (ADS)

    Scheler, Fabian; Mitzlaff, Martin; Schröder-Preikschat, Wolfgang

    Die Entscheidung, einen zeit- bzw. ereignisgesteuerten Ansatz für ein Echtzeitsystem zu verwenden, ist schwierig und sehr weitreichend. Weitreichend vor allem deshalb, weil diese beiden Ansätze mit äußerst unterschiedlichen Kontrollflussabstraktionen verknüpft sind, die eine spätere Migration zum anderen Paradigma sehr schwer oder gar unmöglich machen. Wir schlagen daher die Verwendung einer Zwischendarstellung vor, die unabhängig von der jeweils verwendeten Kontrollflussabstraktion ist. Für diesen Zweck verwenden wir auf Basisblöcken basierende Atomic Basic Blocks (ABB) und bauen darauf ein Werkzeug, den Real-Time Systems Compiler (RTSC) auf, der die Migration zwischen zeit- und ereignisgesteuerten Systemen unterstützt.

  12. Basic memory module

    NASA Technical Reports Server (NTRS)

    Tietze, F. C.

    1974-01-01

    Construction and electrical characterization of the 4096 x 2-bit Basic Memory Module (BMM) are reported for the Space Ultrareliable Modular Computer (SUMC) program. The module uses four 2K x 1-bit N-channel FET, random access memory chips, called array chips, and two sense amplifier chips, mounted and interconnected on a ceramic substrate. Four 5% tolerance power supplies are required. At the Module, the address, chip select, and array select lines require a 0-8.5 V MOS signal level. The data output, read-strobe, and write-enable lines operate at TTl levels. Although the module is organized as 4096 x 2 bits, it can be used in a 8196 x 1-bit application with appropriate external connections. A 4096 x 1-bit organization can be obtained by depopulating chips.

  13. Basic properties and variability

    NASA Technical Reports Server (NTRS)

    Querci, Francois R.

    1987-01-01

    Giant and supergiant M, S, and C stars are discussed in this survey of research. Basic properties as determined by spectra, chemical composition, photometry, or variability type are discussed. Space motions and space distributions of cool giants are described. Distribution of these stars in our galaxy and those nearby is discussed. Mira variables in particular are surveyed with emphasis on the following topics: (1) phase lag phenomenon; (2) Mira light curves; (3) variations in color indices; (4) determination of multiple periods; (5) correlations between quantities such as period length, light-curve shape, infrared (IR) excess, and visible and IR color diagram; (6) semiregular (SR) variables and different time scales in SR light variations; (7) irregular variable Lb and Lc stars; (8) different time-scale light variations; (9) hydrogen-deficient carbon (HdC) stars, in particular RCB stars; and (10) irreversible changes and rapid evolution in red variable stars.

  14. Basic control systems engineering

    SciTech Connect

    Lewis, P.H.; Yang, C.

    1997-12-31

    This book is one of the latest at the basic or introductory level, which is addressed to undergraduate juniors and seniors across several engineering disciplines such as mechanical, chemical, aerospace, and electrical. In fact, the background of the authors include electrical and aerospace engineering, respectively. The book contains the standard material presented at the undergraduate level. However, there appears to have been a serious attempt by the authors to address several practical implementation issues such as actuator saturation and other nonlinearities, bandwidth limitations, etc. In addition, there is an elementary consideration of the control of discrete event dynamical systems, a subject that has not traditionally been considered in elementary texts, but which nevertheless is increasingly important in industrial applications.

  15. Basic Blood Tests (For Parents)

    MedlinePlus

    ... Child Adjust to Preschool School Lunches Kids and Food: 10 Tips for Parents Healthy Habits for TV, Video Games, and the Internet Basic Blood Chemistry Tests KidsHealth > For Parents > Basic Blood Chemistry Tests ...

  16. Electro-Optical Plasmonic Switch Based On Graphene

    NASA Astrophysics Data System (ADS)

    Park, Suk-Young; Moon, Kyungsun

    2014-03-01

    We have studied an electro-optical plasmonic waveguide, which controls the transmission of incident light by switching the coupling of the surface plasmon polariton (SPP) localized on graphene. It has been previously shown that the propagation length of the SPP localized on the copper surface can be effectively reduced by a factor of two or three by applying external bias potential. In our study, we have demonstrated that the propagation length of the SPP localized on graphene can be dramatically reduced by a factor of ten or so and the wavelength of SPP can be reduced by several hundredths of the incident light as well. This may help develop a nano-scale plasmonic switch. This research was supported by Basic Science Research Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Education, Science and Technology (NRF-2012R1A1A2006927).

  17. Dual-kind Q-switching of erbium fiber laser

    SciTech Connect

    Barmenkov, Yuri O. Kir'yanov, Alexander V.; Cruz, Jose L.; Andres, Miguel V.

    2014-03-03

    Two different regimes of Q-switching in the same implementation of an actively Q-switched erbium-doped fiber laser are demonstrated. Depending on the active fiber length and repetition rate of an intracavity Q-cell (acousto-optic modulator), the laser operates either in the regime of common, rather long and low-power, pulses composed of several sub-pulses or in the one of very short and powerful stimulated Brillouin scattering-induced pulses. The basic physical reason of the laser system to oscillate in one of these two regimes is the existence or absence of CW narrow-line “bad-cavity” lasing in the intervals when the Q-cell is blocked.

  18. Plasma Switch for High-Power Active Pulse Compressor

    SciTech Connect

    Hirshfield, Jay L.

    2013-11-04

    Results are presented from experiments carried out at the Naval Research Laboratory X-band magnicon facility on a two-channel X-band active RF pulse compressor that employed plasma switches. Experimental evidence is shown to validate the basic goals of the project, which include: simultaneous firing of plasma switches in both channels of the RF circuit, operation of quasi-optical 3-dB hybrid directional coupler coherent superposition of RF compressed pulses from both channels, and operation of the X-band magnicon directly in the RF pulse compressor. For incident 1.2 ?s pulses in the range 0.63 ? 1.35 MW, compressed pulses of peak powers 5.7 ? 11.3 MW were obtained, corresponding to peak power gain ratios of 8.3 ? 9.3. Insufficient bakeout and conditioning of the high-power RF circuit prevented experiments from being conducted at higher RF input power levels.

  19. Korean Basic Course. Volume Two.

    ERIC Educational Resources Information Center

    Park, B. Nam

    Volume Two of the Korean Basic Course contains Units 29 through 47. Most units consist of (1) a basic dialog, (2) notes on the basic dialog, (3) additional vocabulary and phrases, (4) grammar notes, (5) drills, (6) a supplementary dialog for comprehension, (7) a narrative for comprehension and reading, and (8) exercises. Two of the last units…

  20. "New Voices": Enduring Basic Writing

    ERIC Educational Resources Information Center

    Bourgeois, Pamela

    2008-01-01

    This article addresses the issue of basic writing, demonstrating how one university's basic writing program acts as a steward of writing. The assumption that basic writers only consume resources rather than contribute to academic excellence is rejected. What links the author responses to this issue is a publication of student writing entitled…

  1. Switching processes in financial markets

    PubMed Central

    Preis, Tobias; Schneider, Johannes J.; Stanley, H. Eugene

    2011-01-01

    For an intriguing variety of switching processes in nature, the underlying complex system abruptly changes from one state to another in a highly discontinuous fashion. Financial market fluctuations are characterized by many abrupt switchings creating upward trends and downward trends, on time scales ranging from macroscopic trends persisting for hundreds of days to microscopic trends persisting for a few minutes. The question arises whether these ubiquitous switching processes have quantifiable features independent of the time horizon studied. We find striking scale-free behavior of the transaction volume after each switching. Our findings can be interpreted as being consistent with time-dependent collective behavior of financial market participants. We test the possible universality of our result by performing a parallel analysis of fluctuations in time intervals between transactions. We suggest that the well known catastrophic bubbles that occur on large time scales—such as the most recent financial crisis—may not be outliers but single dramatic representatives caused by the formation of increasing and decreasing trends on time scales varying over nine orders of magnitude from very large down to very small. PMID:21521789

  2. Fast all-optical switch

    NASA Technical Reports Server (NTRS)

    Shay, Thomas M. (Inventor); Poliakov, Evgeni Y. (Inventor); Hazzard, David A. (Inventor)

    2001-01-01

    An apparatus and method wherein polarization rotation in alkali vapors or other mediums is used for all-optical switching and digital logic and where the rate of operation is proportional to the amplitude of the pump field. High rates of speed are accomplished by Rabi flopping of the atomic states using a continuously operating monochromatic atomic beam as the pump.

  3. High voltage MOSFET switching circuit

    DOEpatents

    McEwan, Thomas E.

    1994-01-01

    The problem of source lead inductance in a MOSFET switching circuit is compensated for by adding an inductor to the gate circuit. The gate circuit inductor produces an inductive spike which counters the source lead inductive drop to produce a rectangular drive voltage waveform at the internal gate-source terminals of the MOSFET.

  4. Anode initiated surface flashover switch

    SciTech Connect

    Brainard, John P.; Koss, Robert J.

    2003-04-29

    A high voltage surface flashover switch has a pair of electrodes spaced by an insulator. A high voltage is applied to an anode, which is smaller than the opposing, grounded, cathode. When a controllable source of electrons near the cathode is energized, the electrons are attracted to the anode where they reflect to the insulator and initiate anode to cathode breakdown.

  5. Magnetically Insulated Opening Switch Research.

    DTIC Science & Technology

    1987-01-01

    this research is to investigate the validity of the magneti- cally insulated opening switch concept proposed by Eninger (Ref. 5, Appendix 1). The...1973). 3. Y. Carmel, and J. Nation, Phys, Rev. Lett. 31, 286 (1973). 4. T.J. Orzechowski, and G. Bekefi, Phys. Fluids 19, 43 (1976). U 5. 3. Eninger

  6. High voltage MOSFET switching circuit

    DOEpatents

    McEwan, T.E.

    1994-07-26

    The problem of source lead inductance in a MOSFET switching circuit is compensated for by adding an inductor to the gate circuit. The gate circuit inductor produces an inductive spike which counters the source lead inductive drop to produce a rectangular drive voltage waveform at the internal gate-source terminals of the MOSFET. 2 figs.

  7. Optimal path to epigenetic switching

    NASA Astrophysics Data System (ADS)

    Roma, David Marin; O'Flanagan, Ruadhan A.; Ruckenstein, Andrei E.; Sengupta, Anirvan M.; Mukhopadhyay, Ranjan

    2005-01-01

    We use large deviation methods to calculate rates of noise-induced transitions between states in multistable genetic networks. We analyze a synthetic biochemical circuit, the toggle switch, and compare the results to those obtained from a numerical solution of the master equation.

  8. Focusing, Sustaining, and Switching Attention

    DTIC Science & Technology

    2013-09-12

    task-irrelevant sound features strongly enhances the ability to maintain attention on a stream based on some other, orthogonal feature, and 3...visual cues can be used to direct selective auditory attention. 15. SUBJECT TERMS selective attention, streaming, grouping, sound segregation, auditory...sustaining, and switching attention A. Scientific and Technical Objectives Acoustic information is conveyed by changes in sound over time

  9. Switching mechanism senses angular acceleration

    NASA Technical Reports Server (NTRS)

    1966-01-01

    Switching mechanism actuates an electrical circuit when a predetermined angular acceleration and displacement are reached. A rotor in the mechanism overcomes the restraint of a magnetic detent when the case in which the detent is mounted reaches the predetermined angular acceleration.

  10. Remotely-actuated biomedical switch

    NASA Technical Reports Server (NTRS)

    Lee, R. D.

    1969-01-01

    Remotely-actuated biomedical switching circuit using transistors consumes no power in the off position and can be actuated by a single-frequency telemetry pulse to control implanted instrumentation. Silicon controlled rectifiers permit the circuit design which imposes zero drain on supply batteries when not in use.

  11. Wide Bandgap Extrinsic Photoconductive Switches

    SciTech Connect

    Sullivan, James S.

    2013-07-03

    Semi-insulating Gallium Nitride, 4H and 6H Silicon Carbide are attractive materials for compact, high voltage, extrinsic, photoconductive switches due to their wide bandgap, high dark resistance, high critical electric field strength and high electron saturation velocity. These wide bandgap semiconductors are made semi-insulating by the addition of vanadium (4H and 6HSiC) and iron (2H-GaN) impurities that form deep acceptors. These deep acceptors trap electrons donated from shallow donor impurities. The electrons can be optically excited from these deep acceptor levels into the conduction band to transition the wide bandgap semiconductor materials from a semi-insulating to a conducting state. Extrinsic photoconductive switches with opposing electrodes have been constructed using vanadium compensated 6H-SiC and iron compensated 2H-GaN. These extrinsic photoconductive switches were tested at high voltage and high power to determine if they could be successfully used as the closing switch in compact medical accelerators.

  12. Switch programming of reflectivity control devices for the coupled dynamics of a solar sail

    NASA Astrophysics Data System (ADS)

    Hu, Tianjian; Gong, Shengping; Mu, Junshan; Li, Junfeng; Wang, Tianshu; Qian, Weiping

    2016-03-01

    As demonstrated in the Interplanetary Kite-craft Accelerated by Radiation Of the Sun (IKAROS), reflectivity control devices (RCDs) are switched on or off independently with each other, which has nevertheless been ignored by many previous researches. This paper emphasizes the discrete property of RCDs, and aims to obtain an appropriate switch law of RCDs for a rigid spinning solar sail. First, the coupled attitude-orbit dynamics is derived from the basic solar force and torque model into an underdetermined linear system with a binary set constraint. Subsequently, the coupled dynamics is reformulated into a constrained quadratic programming and a basic gradient projection method is designed to search for the optimal solution. Finally, a circular sail flying in the Venus rendezvous mission demonstrates the model and method numerically, which illustrates approximately 103 km terminal position error and 0.5 m/s terminal velocity error as 80 independent RCDs are switched on or off appropriately.

  13. 30 CFR 75.1000 - Cutout switches.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES Trolley Wires and Trolley Feeder Wires § 75.1000 Cutout switches. Trolley wires and trolley feeder wires, shall be provided with cutout switches at intervals of...

  14. Ultrafast Beam Switching Using Coupled VCSELs

    NASA Technical Reports Server (NTRS)

    Ning, Cun-Zheng; Goorjian, Peter

    2001-01-01

    We propose a new approach to performing ultrafast beam switching using two coupled Vertical-Cavity Surface-Emitting Lasers (VCSELs). The strategy is demonstrated by numerical simulation, showing a beam switching of 10 deg at 42 GHz.

  15. 30 CFR 75.1000 - Cutout switches.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES Trolley Wires and Trolley Feeder Wires § 75.1000 Cutout switches. Trolley wires and trolley feeder wires, shall be provided with cutout switches at intervals...

  16. 30 CFR 75.1000 - Cutout switches.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES Trolley Wires and Trolley Feeder Wires § 75.1000 Cutout switches. Trolley wires and trolley feeder wires, shall be provided with cutout switches at intervals...

  17. 30 CFR 75.1000 - Cutout switches.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES Trolley Wires and Trolley Feeder Wires § 75.1000 Cutout switches. Trolley wires and trolley feeder wires, shall be provided with cutout switches at intervals...

  18. Carbon isotope controlled molecular switches

    NASA Astrophysics Data System (ADS)

    Foster, Brian K.

    Single molecules represent one fundamental limit to the downscaling of electronics. As a prototype element for carbon-based nanoscale science and technology, the detailed behavior of carbon monoxide (CO) on the copper surface Cu(111) has been investigated. These investigations span from individual carbon isotope resolution, to single molecules, to compact clusters assembled by molecular manipulation via a homemade scanning tunneling microscope (STM). Sub-nanoscale devices, composed of only a few molecules, which exploit both lone CO properties and molecule-molecule interaction, have been designed and assembled. The devices function as bi-stable switches and can serve as classical bits with densities > 50 Tbits/cm2. Operated in the nuclear mass sensitive regime, each switch can also function as a molecular "centrifuge" capable of identifying the isotope of a single carbon atom in real-time. A model, based on electron-vibron couping and inelastic tunneling, has been developed and explains the dynamic behavior of the switch. The interaction between pairs of switches was also explored and it was found that their behavior ranges from completely independent to strongly coupled. Larger nanostructures, which were composed of many sub-switches organized to leverage the fully coupled interaction, link two spatially separated "bits" on the surface. Such a linked system can set or read a state non-locally, which is equivalent to bidirectional information transfer. The linked system has also exhibited logic functionality. These experiments demonstrate scalable molecular cells for information storage, and for information processing through cellular automata logic schemes.

  19. A multi-functional high voltage experiment apparatus for vacuum surface flashover switch research.

    PubMed

    Zeng, Bo; Su, Jian-cang; Cheng, Jie; Wu, Xiao-long; Li, Rui; Zhao, Liang; Fang, Jin-peng; Wang, Li-min

    2015-04-01

    A multifunctional high voltage apparatus for experimental researches on surface flashover switch and high voltage insulation in vacuum has been developed. The apparatus is composed of five parts: pulse generating unit, axial field unit, radial field unit, and two switch units. Microsecond damped ringing pulse with peak-to-peak voltage 800 kV or unipolar pulse with maximum voltage 830 kV is generated, forming transient axial or radial electrical field. Different pulse waveforms and field distributions make up six experimental configurations in all. Based on this apparatus, preliminary experiments on vacuum surface flashover switch with different flashover dielectric materials have been conducted in the axial field unit, and nanosecond pulse is generated in the radial field unit which makes a pulse transmission line in the experiment. Basic work parameters of this kind of switch such as lifetime, breakdown voltage are obtained.

  20. A Dual-Range Strain Gage Weighing Transducer Employing Automatic Switching

    Treesearch

    Rodger A. Arola

    1968-01-01

    Describes a dual-range strain gage transducer which has proven to be an excellent weight-sensing device for weighing trees and tree-length logs; discusses basic principals of the design and operation; and shows that a single transducer having two sensitivity ranges with automatic internal switching can sense weight with good repeatability and that one calibration curve...

  1. A New Phenomenon in Saudi Females' Code-Switching: A Morphemic Analysis

    ERIC Educational Resources Information Center

    Turjoman, Mona O.

    2016-01-01

    This sociolinguistics study investigates a new phenomenon that has recently surfaced in the field of code-switching among Saudi females residing in the Western region of Saudi Arabia. This phenomenon basically combines bound Arabic pronouns, tense markers or definite article to English free morphemes or the combination of bound English affixes to…

  2. Spark gap switch with spiral gas flow

    DOEpatents

    Brucker, John P.

    1989-01-01

    A spark gap switch having a contaminate removal system using an injected gas. An annular plate concentric with an electrode of the switch defines flow paths for the injected gas which form a strong spiral flow of the gas in the housing which is effective to remove contaminates from the switch surfaces. The gas along with the contaminates is exhausted from the housing through one of the ends of the switch.

  3. Rail-gap switch modifications and test data for the Atlas capacitor bank

    SciTech Connect

    Lopez, E.A.; Bennett, G.A.; Bartsch, R.R.

    1997-09-01

    Atlas is a facility being designed at the Los Alamos National Laboratory (LANL) to perform high energy-density experiments in support of weapons-physics and basic-research programs. The capacitor bank design consists of a 36-MJ array of 240-kV Marx modules. The system is designed to deliver a peak current of 45- to 50-MA with a 4- to 5-us risetime. Evaluation, testing and qualification of key components of the Marx module are being conducted. One key element of the Marx module is the low inductance, high-voltage, high-current, high-coulomb transfer spark-gap switch needed for this application, 304 of which will be used in the Atlas capacitor bank. Because of the Marx module configuration, overall system inductance requirements and the need for a triggered switch, the design team initially selected the Maxwell Technologies railgap switch. The switch has been used in other high-voltage, high-current, high-coulomb transfer applications and would meet the Atlas facility requirements with some modifications. Testing of the Maxwell rail-gap switch under expected Atlas conditions is in progress. For the Atlas application, the rail-gap switch required some mechanical design modifications, which are discussed. Maxwell provided to modified switches for testing and evaluation. Results of this testing, before and after modifications, and inherent maintenance improvements to meet overall system reliability will be discussed.

  4. Back to basics

    NASA Astrophysics Data System (ADS)

    Carlowicz, Michael

    In an effort to educate the public about the long road from obscure experiment to life-changing discovery, the National Academy of Sciences (NAS) has been enlisting prominent researchers, science writers, and scientific organizations such as the AGU. More than two years in development, the NAS basic science initiative “Beyond Discovery: The Path From Research to Human Benefits” is an attempt to translate peer-review-quality science papers into general-interest science articles and booklets.As conceived by NAS vice-president Jack Halpern and a host of representatives from the scientific community, the Beyond Discovery initiative will “develop case studies that identify and trace the origins of important technological and medical advances.” These case studies will be written by scientists in a style publishable in a journal such as the Proceedings of the National Academy of Science. The articles are intended to be understandable to educators, college students, and the scientifically literate public. The case studies then will be further distilled by science writers into articles for a wider audience of policy makers and the general public.

  5. Biosimilar Insulins: Basic Considerations.

    PubMed

    Heinemann, Lutz; Hompesch, Marcus

    2014-01-01

    Until now most of the insulin used in developed countries has been manufactured and distributed by a small number of multinational companies. Beyond the established insulin manufacturers, a number of new players have developed insulin manufacturing capacities based on modern biotechnological methods. Because the patents for many of the approved insulin formulations have expired or are going to expire soon, these not yet established companies are increasingly interested in seeking market approval for their insulin products as biosimilar insulins (BI) in highly regulated markets like the EU and the United States. Differences in the manufacturing process (none of the insulin manufacturing procedures are 100% identical) can lead to insulins that to some extent may differ from the originator insulin. The key questions are if subtle differences in the structure of the insulins, purity, and so on are clinically relevant and may result in different biological effects. The aim of this article is to introduce and discuss basic aspects that may be of relevance with regard to BI. © 2014 Diabetes Technology Society.

  6. Gastric cancer: basic aspects.

    PubMed

    Resende, Carlos; Thiel, Alexandra; Machado, José C; Ristimäki, Ari

    2011-09-01

    Gastric cancer (GC) is a world health burden, ranging as the second cause of cancer death worldwide. Etiologically, GC arises not only from the combined effects of environmental factors and susceptible genetic variants but also from the accumulation of genetic and epigenetic alterations. In the last years, molecular oncobiology studies brought to light a number of genes that are implicated in gastric carcinogenesis. This review is intended to focus on the recently described basic aspects that play key roles in the process of gastric carcinogenesis. Genetic variants of the genes IL-10, IL-17, MUC1, MUC6, DNMT3B, SMAD4, and SERPINE1 have been reported to modify the risk of developing GC. Several genes have been newly associated with gastric carcinogenesis, both through oncogenic activation (GSK3β, CD133, DSC2, P-Cadherin, CDH17, CD168, CD44, metalloproteinases MMP7 and MMP11, and a subset of miRNAs) and through tumor suppressor gene inactivation mechanisms (TFF1, PDX1, BCL2L10, XRCC, psiTPTE-HERV, HAI-2, GRIK2, and RUNX3). It also addressed the role of the inflammatory mediator cyclooxygenase-2 (COX-2) in the process of gastric carcinogenesis and its importance as a potential molecular target for therapy.

  7. Basic concepts of epigenetics

    PubMed Central

    Mazzio, Elizabeth A

    2012-01-01

    Through epigenetic modifications, specific long-term phenotypic consequences can arise from environmental influence on slowly evolving genomic DNA. Heritable epigenetic information regulates nucleosomal arrangement around DNA and determines patterns of gene silencing or active transcription. One of the greatest challenges in the study of epigenetics as it relates to disease is the enormous diversity of proteins, histone modifications and DNA methylation patterns associated with each unique maladaptive phenotype. This is further complicated by a limitless combination of environmental cues that could alter the epigenome of specific cell types, tissues, organs and systems. In addition, complexities arise from the interpretation of studies describing analogous but not identical processes in flies, plants, worms, yeast, ciliated protozoans, tumor cells and mammals. This review integrates fundamental basic concepts of epigenetics with specific focus on how the epigenetic machinery interacts and operates in continuity to silence or activate gene expression. Topics covered include the connection between DNA methylation, methyl-CpG-binding proteins, transcriptional repression complexes, histone residues, histone modifications that mediate gene repression or relaxation, histone core variant stability, H1 histone linker flexibility, FACT complex, nucleosomal remodeling complexes, HP1 and nuclear lamins. PMID:22395460

  8. Basic science of osteoarthritis.

    PubMed

    Cucchiarini, Magali; de Girolamo, Laura; Filardo, Giuseppe; Oliveira, J Miguel; Orth, Patrick; Pape, Dietrich; Reboul, Pascal

    2016-12-01

    Osteoarthritis (OA) is a prevalent, disabling disorder of the joints that affects a large population worldwide and for which there is no definitive cure. This review provides critical insights into the basic knowledge on OA that may lead to innovative end efficient new therapeutic regimens. While degradation of the articular cartilage is the hallmark of OA, with altered interactions between chondrocytes and compounds of the extracellular matrix, the subchondral bone has been also described as a key component of the disease, involving specific pathomechanisms controlling its initiation and progression. The identification of such events (and thus of possible targets for therapy) has been made possible by the availability of a number of animal models that aim at reproducing the human pathology, in particular large models of high tibial osteotomy (HTO). From a therapeutic point of view, mesenchymal stem cells (MSCs) represent a promising option for the treatment of OA and may be used concomitantly with functional substitutes integrating scaffolds and drugs/growth factors in tissue engineering setups. Altogether, these advances in the fundamental and experimental knowledge on OA may allow for the generation of improved, adapted therapeutic regimens to treat human OA.

  9. Basic cell culture.

    PubMed

    Pollard, J W

    1990-01-01

    This article will describe the basic techniques required for successful cell culture. It will also act to introduce some of the other chapters in this volume. It is not intended, as this volume is not, to describe the establishment of a tissue culture laboratory, nor to provide a historical or theoretical survey of cell culture. There are several books that adequately cover these areas, including the now somewhat dated but still valuable volume by Paul (1), the multi-authored Methods in Enzymology volume edited by Jakoby and Pastan (2), and the new edition of Freshney (3). Instead, this chapter's focus will be on the techniques for establishing primary rodent cell cultures from embryos and adult skin, maintaining and subculturing these fibro-blasts and their transformed derivatives, and the isolation of genetically pure strains. The cells described are all derived from Chinese hamsters since, to date, these cells, have proved to be the most useful for somatic cell genetics (4,5). The techniques, however, are generally applicable to most fibroblastic cell types.

  10. Basics of cytology

    PubMed Central

    Al-Abbadi, Mousa A.

    2011-01-01

    This overview is intended to give a general outline about the basics of Cytopathology. This is a field that is gaining tremendous momentum all over the world due to its speed, accuracy and cost effectiveness. This review will include a brief description about the history of cytology from its inception followed by recent developments. Discussion about the different types of specimens, whether exfoliative or aspiration will be presented with explanation of its rule as a screening and diagnostic test. A brief description of the indications, utilization, sensitivity, specificity, cost effectiveness, speed and accuracy will be carried out. The role that cytopathology plays in early detection of cancer will be emphasized. The ability to provide all types of ancillary studies necessary to make specific diagnosis that will dictate treatment protocols will be demonstrated. A brief description of the general rules of cytomorphology differentiating benign from malignant will be presented. Emphasis on communication between clinicians and pathologist will be underscored. The limitations and potential problems in the form of false positive and false negative will be briefly discussed. Few representative examples will be shown. A brief description of the different techniques in performing fine needle aspirations will be presented. General recommendation for the safest methods and hints to enhance the sensitivity of different sample procurement will be given. It is hoped that this review will benefit all practicing clinicians that may face certain diagnostic challenges requiring the use of cytological material. PMID:23210005

  11. A new very high voltage semiconductor switch

    NASA Technical Reports Server (NTRS)

    Sundberg, G. R.

    1985-01-01

    A new family of semiconductor switches using double injection techniques and compensated deep impurities is described. They have the potential to raise switching voltages a factor of 10 higher (up to 100 kV) than p-n junction devices while exhibiting extremely low (or zero) forward voltage. Several potential power switching applications are indicated.

  12. 46 CFR 112.43-1 - Switches.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 4 2012-10-01 2012-10-01 false Switches. 112.43-1 Section 112.43-1 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) ELECTRICAL ENGINEERING EMERGENCY LIGHTING AND POWER SYSTEMS Emergency Lighting Systems § 112.43-1 Switches. An emergency lighting system must not have a switch, except...

  13. 46 CFR 112.43-1 - Switches.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 4 2014-10-01 2014-10-01 false Switches. 112.43-1 Section 112.43-1 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) ELECTRICAL ENGINEERING EMERGENCY LIGHTING AND POWER SYSTEMS Emergency Lighting Systems § 112.43-1 Switches. An emergency lighting system must not have a switch, except...

  14. 46 CFR 112.43-1 - Switches.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Switches. 112.43-1 Section 112.43-1 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) ELECTRICAL ENGINEERING EMERGENCY LIGHTING AND POWER SYSTEMS Emergency Lighting Systems § 112.43-1 Switches. An emergency lighting system must not have a switch, except...

  15. 46 CFR 112.43-1 - Switches.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 4 2013-10-01 2013-10-01 false Switches. 112.43-1 Section 112.43-1 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) ELECTRICAL ENGINEERING EMERGENCY LIGHTING AND POWER SYSTEMS Emergency Lighting Systems § 112.43-1 Switches. An emergency lighting system must not have a switch, except...

  16. 46 CFR 112.43-1 - Switches.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Switches. 112.43-1 Section 112.43-1 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) ELECTRICAL ENGINEERING EMERGENCY LIGHTING AND POWER SYSTEMS Emergency Lighting Systems § 112.43-1 Switches. An emergency lighting system must not have a switch, except...

  17. Switch for serial or parallel communication networks

    DOEpatents

    Crosette, Dario B.

    1994-01-01

    A communication switch apparatus and a method for use in a geographically extensive serial, parallel or hybrid communication network linking a multi-processor or parallel processing system has a very low software processing overhead in order to accommodate random burst of high density data. Associated with each processor is a communication switch. A data source and a data destination, a sensor suite or robot for example, may also be associated with a switch. The configuration of the switches in the network are coordinated through a master processor node and depends on the operational phase of the multi-processor network: data acquisition, data processing, and data exchange. The master processor node passes information on the state to be assumed by each switch to the processor node associated with the switch. The processor node then operates a series of multi-state switches internal to each communication switch. The communication switch does not parse and interpret communication protocol and message routing information. During a data acquisition phase, the communication switch couples sensors producing data to the processor node associated with the switch, to a downlink destination on the communications network, or to both. It also may couple an uplink data source to its processor node. During the data exchange phase, the switch couples its processor node or an uplink data source to a downlink destination (which may include a processor node or a robot), or couples an uplink source to its processor node and its processor node to a downlink destination.

  18. Photoconductive switching for high power microwave generation

    SciTech Connect

    Pocha, M.D.; Hofer, W.W.

    1990-10-01

    Photoconductive switching is a technology that is being increasingly applied to generation of high power microwaves. Two primary semiconductors used for these devices are silicon and gallium arsenide. Diamond is a promising future candidate material. This paper discusses the important material parameters and switching modes, critical issues for microwave generation, and future directions for this high power, photoconductive switching technology.

  19. 14 CFR 27.1361 - Master switch.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... STANDARDS: NORMAL CATEGORY ROTORCRAFT Equipment Electrical Systems and Equipment § 27.1361 Master switch. (a) There must be a master switch arrangement to allow ready disconnection of each electric power source from the main bus. The point of disconnection must be adjacent to the sources controlled by the switch...

  20. A CW Gunn Diode Switching Element.

    ERIC Educational Resources Information Center

    Hurtado, Marco; Rosenbaum, Fred J.

    As part of a study of the application of communication satellites to educational development, certain technical aspects of such a system were examined. A current controlled bistable switching element using a CW Gunn diode is reported on here. With modest circuits switching rates of the order of 10 MHz have been obtained. Switching is initiated by…

  1. 14 CFR 27.1361 - Master switch.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Master switch. 27.1361 Section 27.1361... STANDARDS: NORMAL CATEGORY ROTORCRAFT Equipment Electrical Systems and Equipment § 27.1361 Master switch. (a) There must be a master switch arrangement to allow ready disconnection of each electric power...

  2. 14 CFR 27.1367 - Switches.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Switches. 27.1367 Section 27.1367... STANDARDS: NORMAL CATEGORY ROTORCRAFT Equipment Electrical Systems and Equipment § 27.1367 Switches. Each switch must be— (a) Able to carry its rated current; (b) Accessible to the crew; and (c) Labeled as...

  3. 49 CFR 236.821 - Switch, sectionalizing.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 4 2011-10-01 2011-10-01 false Switch, sectionalizing. 236.821 Section 236.821 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION... Switch, sectionalizing. A switch for disconnecting a section of a power line from the source of energy....

  4. 46 CFR 111.105-19 - Switches.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Switches. 111.105-19 Section 111.105-19 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) ELECTRICAL ENGINEERING ELECTRIC SYSTEMS-GENERAL REQUIREMENTS Hazardous Locations § 111.105-19 Switches. A switch that is explosionproof or flameproof, or...

  5. 30 CFR 56.9308 - Switch throws.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Switch throws. 56.9308 Section 56.9308 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND... Switch throws. Switch throws shall be installed to provide clearance to protect switchmen from...

  6. 30 CFR 77.1800 - Cutout switches.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Cutout switches. 77.1800 Section 77.1800... Wires and Trolley Feeder Wires § 77.1800 Cutout switches. Trolley wires and trolley feeder wires shall be provided with cutout switches at intervals of not more than 2,000 feet and near the beginning...

  7. 49 CFR 236.820 - Switch, interlocked.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Switch, interlocked. 236.820 Section 236.820 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION... Switch, interlocked. A switch within the interlocking limits the control of which is interlocked...

  8. 30 CFR 77.1800 - Cutout switches.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Cutout switches. 77.1800 Section 77.1800... Wires and Trolley Feeder Wires § 77.1800 Cutout switches. Trolley wires and trolley feeder wires shall be provided with cutout switches at intervals of not more than 2,000 feet and near the beginning...

  9. 49 CFR 236.822 - Switch, spring.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Switch, spring. 236.822 Section 236.822 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION... Switch, spring. A switch equipped with a spring device which forces the points to their original...

  10. 49 CFR 236.822 - Switch, spring.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 4 2011-10-01 2011-10-01 false Switch, spring. 236.822 Section 236.822 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION... Switch, spring. A switch equipped with a spring device which forces the points to their original...

  11. 14 CFR 27.1367 - Switches.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Switches. 27.1367 Section 27.1367... STANDARDS: NORMAL CATEGORY ROTORCRAFT Equipment Electrical Systems and Equipment § 27.1367 Switches. Each switch must be— (a) Able to carry its rated current; (b) Accessible to the crew; and (c) Labeled as...

  12. 30 CFR 57.9308 - Switch throws.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Switch throws. 57.9308 Section 57.9308 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND....9308 Switch throws. Switch throws shall be installed to provide clearance to protect switchmen...

  13. 46 CFR 111.105-19 - Switches.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Switches. 111.105-19 Section 111.105-19 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) ELECTRICAL ENGINEERING ELECTRIC SYSTEMS-GENERAL REQUIREMENTS Hazardous Locations § 111.105-19 Switches. A switch that is explosionproof or flameproof, or...

  14. 30 CFR 75.1000 - Cutout switches.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Cutout switches. 75.1000 Section 75.1000 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH... switches. Trolley wires and trolley feeder wires, shall be provided with cutout switches at intervals...

  15. 49 CFR 236.821 - Switch, sectionalizing.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Switch, sectionalizing. 236.821 Section 236.821 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION... Switch, sectionalizing. A switch for disconnecting a section of a power line from the source of energy....

  16. 49 CFR 236.820 - Switch, interlocked.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 4 2011-10-01 2011-10-01 false Switch, interlocked. 236.820 Section 236.820 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION... Switch, interlocked. A switch within the interlocking limits the control of which is interlocked...

  17. 49 CFR 213.135 - Switches.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 4 2011-10-01 2011-10-01 false Switches. 213.135 Section 213.135 Transportation... TRANSPORTATION TRACK SAFETY STANDARDS Track Structure § 213.135 Switches. (a) Each stock rail must be securely seated in switch plates, but care shall be used to avoid canting the rail by overtightening the...

  18. 49 CFR 213.135 - Switches.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Switches. 213.135 Section 213.135 Transportation... TRANSPORTATION TRACK SAFETY STANDARDS Track Structure § 213.135 Switches. (a) Each stock rail must be securely seated in switch plates, but care shall be used to avoid canting the rail by overtightening the...

  19. 30 CFR 56.9308 - Switch throws.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Switch throws. 56.9308 Section 56.9308 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND... Switch throws. Switch throws shall be installed to provide clearance to protect switchmen from...

  20. 30 CFR 57.9308 - Switch throws.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Switch throws. 57.9308 Section 57.9308 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND....9308 Switch throws. Switch throws shall be installed to provide clearance to protect switchmen...