Science.gov

Sample records for 2d layer structure

  1. Topologic connection between 2-D layered structures and 3-D diamond structures for conventional semiconductors

    PubMed Central

    Wang, Jianwei; Zhang, Yong

    2016-01-01

    When coming to identify new 2D materials, our intuition would suggest us to look from layered instead of 3D materials. However, since graphite can be hypothetically derived from diamond by stretching it along its [111] axis, many 3D materials can also potentially be explored as new candidates for 2D materials. Using a density functional theory, we perform a systematic study over the common Group IV, III–V, and II–VI semiconductors along different deformation paths to reveal new structures that are topologically connected to but distinctly different from the 3D parent structure. Specifically, we explore two major phase transition paths, originating respectively from wurtzite and NiAs structure, by applying compressive and tensile strain along the symmetry axis, and calculating the total energy changes to search for potential metastable states, as well as phonon spectra to examine the structural stability. Each path is found to further split into two branches under tensile strain–low buckled and high buckled structures, which respectively lead to a low and high buckled monolayer structure. Most promising new layered or planar structures identified include BeO, GaN, and ZnO on the tensile strain side, Ge, Si, and GaP on the compressive strain side. PMID:27090430

  2. An effective structure prediction method for layered materials based on 2D particle swarm optimization algorithm.

    PubMed

    Wang, Yanchao; Miao, Maosheng; Lv, Jian; Zhu, Li; Yin, Ketao; Liu, Hanyu; Ma, Yanming

    2012-12-14

    A structure prediction method for layered materials based on two-dimensional (2D) particle swarm optimization algorithm is developed. The relaxation of atoms in the perpendicular direction within a given range is allowed. Additional techniques including structural similarity determination, symmetry constraint enforcement, and discretization of structure constructions based on space gridding are implemented and demonstrated to significantly improve the global structural search efficiency. Our method is successful in predicting the structures of known 2D materials, including single layer and multi-layer graphene, 2D boron nitride (BN) compounds, and some quasi-2D group 6 metals(VIB) chalcogenides. Furthermore, by use of this method, we predict a new family of mono-layered boron nitride structures with different chemical compositions. The first-principles electronic structure calculations reveal that the band gap of these N-rich BN systems can be tuned from 5.40 eV to 2.20 eV by adjusting the composition.

  3. Compelling experimental evidence of a Dirac cone in the electronic structure of a 2D Silicon layer

    PubMed Central

    Sadeddine, Sana; Enriquez, Hanna; Bendounan, Azzedine; Kumar Das, Pranab; Vobornik, Ivana; Kara, Abdelkader; Mayne, Andrew J.; Sirotti, Fausto; Dujardin, Gérald; Oughaddou, Hamid

    2017-01-01

    The remarkable properties of graphene stem from its two-dimensional (2D) structure, with a linear dispersion of the electronic states at the corners of the Brillouin zone (BZ) forming a Dirac cone. Since then, other 2D materials have been suggested based on boron, silicon, germanium, phosphorus, tin, and metal di-chalcogenides. Here, we present an experimental investigation of a single silicon layer on Au(111) using low energy electron diffraction (LEED), high resolution angle-resolved photoemission spectroscopy (HR-ARPES), and scanning tunneling microscopy (STM). The HR-ARPES data show compelling evidence that the silicon based 2D overlayer is responsible for the observed linear dispersed feature in the valence band, with a Fermi velocity of comparable to that of graphene. The STM images show extended and homogeneous domains, offering a viable route to the fabrication of silicene-based opto-electronic devices. PMID:28281666

  4. Compelling experimental evidence of a Dirac cone in the electronic structure of a 2D Silicon layer

    NASA Astrophysics Data System (ADS)

    Sadeddine, Sana; Enriquez, Hanna; Bendounan, Azzedine; Kumar Das, Pranab; Vobornik, Ivana; Kara, Abdelkader; Mayne, Andrew J.; Sirotti, Fausto; Dujardin, Gérald; Oughaddou, Hamid

    2017-03-01

    The remarkable properties of graphene stem from its two-dimensional (2D) structure, with a linear dispersion of the electronic states at the corners of the Brillouin zone (BZ) forming a Dirac cone. Since then, other 2D materials have been suggested based on boron, silicon, germanium, phosphorus, tin, and metal di-chalcogenides. Here, we present an experimental investigation of a single silicon layer on Au(111) using low energy electron diffraction (LEED), high resolution angle-resolved photoemission spectroscopy (HR-ARPES), and scanning tunneling microscopy (STM). The HR-ARPES data show compelling evidence that the silicon based 2D overlayer is responsible for the observed linear dispersed feature in the valence band, with a Fermi velocity of comparable to that of graphene. The STM images show extended and homogeneous domains, offering a viable route to the fabrication of silicene-based opto-electronic devices.

  5. Structure of 2-D and 3-D Turbulent Boundary Layers with Sparsely Distributed Roughness Elements

    DTIC Science & Technology

    2005-06-28

    straight orientation. Stations U, 6, mm 6", mm 0, mm Ree k+ k/6 1 25.98 58.565 12.70 7.65 11997 58.5 0.0130 2 25.36 54.56 12.65 7.52 11518 60.4 0.0139 3...a flat plate boundary layer transition. Engineering Turbulence Modeling and Experiments - 4, W. Rodi and D. Laurence (Eds.), Elsevier Science Ltd

  6. Stability and electronic properties of SiGe-based 2D layered structures

    NASA Astrophysics Data System (ADS)

    Jamdagni, Pooja; Kumar, Ashok; Thakur, Anil; Pandey, Ravindra; Ahluwalia, P. K.

    2015-01-01

    The structural and electronic properties of the in-plane hybrids consisting of siligene (SiGe), and its derivatives in both mono and bilayer forms are investigated within density functional theory. Among several pristine and hydrogenated configurations, the so-called chair conformation is energetically favorable for monolayers. On the other hand, the bilayer siligane (HSiGeH) prefers AB-stacked chair conformation and bilayer siligone (HSiGe) prefers AA-stacked buckled conformation. In SiGe, the Dirac-cone character is predicted to be retained. HSiGe is a magnetic semiconductor with a band gap of ˜0.6 eV. The electronic properties show tunability under mechanical strain and transverse electric field; (i) the energy gap opens up in the SiGe bilayer, (ii) a direct-to-indirect gap transition is predicted by the applied strain in the HSiGeH bilayer, and (iii) a semiconductor-to-metal transition is predicted for HSiGe and HSiGeH bilayers under the application of strain and electric field, thus suggesting SiGe and its derivatives to be a potential candidate for electronic devices at nanoscale.

  7. 3D spin-flop transition in enhanced 2D layered structure single crystalline TlCo2Se2

    NASA Astrophysics Data System (ADS)

    Jin, Z.; Xia, Z.-C.; Wei, M.; Yang, J.-H.; Chen, B.; Huang, S.; Shang, C.; Wu, H.; Zhang, X.-X.; Huang, J.-W.; Ouyang, Z.-W.

    2016-10-01

    The enhanced 2D layered structure single crystalline TlCo2Se2 has been successfully fabricated, which exhibits field-induced 3D spin-flop phase transitions. In the case of the magnetic field parallel to the c-axis (B//c), the applied magnetic field induces the evolution of the noncollinear helical magnetic coupling into a ferromagnetic (FM) state with all the magnetization of the Co ion parallel to the c-axis. A striking variation of the field-induced strain within the ab-plane is noticed in the magnetic field region of 20-30 T. In the case of the magnetic field perpendicular to the c-axis (B  ⊥  c), the inter-layer helical antiferromagnetic (AFM) coupling may transform to an initial canted AFM coupling, and then part of it transforms to an intermediate metamagnetic phase with the alignment of two-up-one-down Co magnetic moments and finally to an ultimate FM coupling in higher magnetic fields. The robust noncollinear AFM magnetic coupling is completely destroyed above 30 T. In combination with the measurements of magnetization, magnetoresistance and field-induced strain, a complete magnetic phase diagram of the TlCo2Se2 single crystal has been depicted, demonstrating complex magnetic structures even though the crystal geometry itself gives no indication of the magnetic frustration.

  8. Syntheses, structures, photoluminescence and photocatalysis of 2D layered lanthanide-carboxylates with 2, 2‧-dithiodibenzoic acid

    NASA Astrophysics Data System (ADS)

    Ding, Ling; Zhong, Jie-Cen; Qiu, Xing-Tai; Sun, Yan-Qiong; Chen, Yi-Ping

    2017-02-01

    Two series of lanthanide-carboxylates, [Ln(2,2‧-dtba)(2,2‧-Hdtba)(EtOH)]n (I:Ln=Eu(1a), Dy(1b)) and [Ln(2,2‧-dtba)(2,2‧-Hdtba)(4,4‧-bpy)0.5]n (II:Ln=Eu(2a), Dy(2b), Tb(2c) 2,2‧-H2dtba=2,2‧-dithiodibenzoic acid, 4,4‧-bpy=4,4‧-bipyridine) have been synthesized under hydrothermal conditions. Interestingly, the H2dtba organic ligand was generated by in situ S-S reaction of 2-mercaptobenzoic acid. Compounds I and II possess different 2D layered structures based on similar 1D [Ln(2,2‧-dtba)]+ chains. Photoluminescence studies reveal that compounds I and II exhibit strong lanthanide characteristic emission bands. Remarkably, Compounds 1b and 2a both exhibit good photocatalytic activity for degradation of Rhodamine-B (Rh-B) under the simulated sunlight irradiation.

  9. Inkjet printing of 2D layered materials.

    PubMed

    Li, Jiantong; Lemme, Max C; Östling, Mikael

    2014-11-10

    Inkjet printing of 2D layered materials, such as graphene and MoS2, has attracted great interests for emerging electronics. However, incompatible rheology, low concentration, severe aggregation and toxicity of solvents constitute critical challenges which hamper the manufacturing efficiency and product quality. Here, we introduce a simple and general technology concept (distillation-assisted solvent exchange) to efficiently overcome these challenges. By implementing the concept, we have demonstrated excellent jetting performance, ideal printing patterns and a variety of promising applications for inkjet printing of 2D layered materials.

  10. Temporal changes of the structure of a loamy soil tilled layers as described by 2D Electrical Resistivity Tomography

    NASA Astrophysics Data System (ADS)

    Besson, Arlène; Seger, Maud; Richard, Guy; Nicoullaud, Bernard; Giot, Guillaume; Cousin, Isabelle

    2010-05-01

    The soil structure is complex, heterogeneous, space and time scale dependent, submitted to the climate, biological activity and human practices. For instance, in agricultural context, when soil management practices aim at developing desirable soil conditions for a seedbed and establishing specific surface configuration for planting, drainage or harvesting operations, they can also induce soil structural disturbances, as compaction resulting on in-field wheel traffic. These intense soil degradations have a drastic impact on soil functioning and plant growth but are not absolutely irreversible. Indeed, earthworm's activity, root growth and climate improve the soil structure by cracking, by developing voids, channels, by a progressive fragmentation and disaggregation of the initial dense matrix. Despite this natural structural resilience process of soils is well known, its empirical evidence at the macroscopic scale remains challenging. This requires a well detailed characterization of structural components in space and time. The objective of this study was to monitor the structural changes of a loamy tilled layer initially compacted locally by wheel traffic. In the field, two zones were analysed: (1) a bare soil in view of describing mainly the impact of the climate on the soil structure and (2) a cultivated soil in view of describing the cumulative effect of the climate and root growth on the soil structure. For both, the non destructive and exhaustive method of Electrical Resistivity Tomography (ERT) has been used to monitor the structural changes from April to August, i.e. during the complete growing season. In addition, the interpretation of ERT was comforted by several visual descriptions of soil structure, realized on soil pits dug at the same location than the ERT profiles and by bulk density measurements from soil samples. Due to their high impact on electrical resistivity, water content and soil temperature were also monitored during the experiment. The

  11. Recent developments in 2D layered inorganic nanomaterials for sensing

    NASA Astrophysics Data System (ADS)

    Kannan, Padmanathan Karthick; Late, Dattatray J.; Morgan, Hywel; Rout, Chandra Sekhar

    2015-08-01

    Two dimensional layered inorganic nanomaterials (2D-LINs) have recently attracted huge interest because of their unique thickness dependent physical and chemical properties and potential technological applications. The properties of these layered materials can be tuned via both physical and chemical processes. Some 2D layered inorganic nanomaterials like MoS2, WS2 and SnS2 have been recently developed and employed in various applications, including new sensors because of their layer-dependent electrical properties. This article presents a comprehensive overview of recent developments in the application of 2D layered inorganic nanomaterials as sensors. Some of the salient features of 2D materials for different sensing applications are discussed, including gas sensing, electrochemical sensing, SERS and biosensing, SERS sensing and photodetection. The working principles of the sensors are also discussed together with examples.

  12. Alloyed 2D Metal-Semiconductor Atomic Layer Junctions.

    PubMed

    Kim, Ah Ra; Kim, Yonghun; Nam, Jaewook; Chung, Hee-Suk; Kim, Dong Jae; Kwon, Jung-Dae; Park, Sang Won; Park, Jucheol; Choi, Sun Young; Lee, Byoung Hun; Park, Ji Hyeon; Lee, Kyu Hwan; Kim, Dong-Ho; Choi, Sung Mook; Ajayan, Pulickel M; Hahm, Myung Gwan; Cho, Byungjin

    2016-03-09

    Heterostructures of compositionally and electronically variant two-dimensional (2D) atomic layers are viable building blocks for ultrathin optoelectronic devices. We show that the composition of interfacial transition region between semiconducting WSe2 atomic layer channels and metallic NbSe2 contact layers can be engineered through interfacial doping with Nb atoms. WxNb1-xSe2 interfacial regions considerably lower the potential barrier height of the junction, significantly improving the performance of the corresponding WSe2-based field-effect transistor devices. The creation of such alloyed 2D junctions between dissimilar atomic layer domains could be the most important factor in controlling the electronic properties of 2D junctions and the design and fabrication of 2D atomic layer devices.

  13. The Organic Flatland-Recent Advances in Synthetic 2D Organic Layers.

    PubMed

    Cai, Song-Liang; Zhang, Wei-Guang; Zuckermann, Ronald N; Li, Zhan-Ting; Zhao, Xin; Liu, Yi

    2015-10-14

    Ultrathin, 2D organic layers of sub-ten nanometer thicknesses and high aspect ratios have received a great deal of attention for their graphene-like topological features and emerging properties. Rational synthetic strategies have led to the realization of periodic 2D layers with unprecedented structural precision. Herein, recent progress on the synthesis of 2D organic layers, including methods based on both non-covalent and covalent interactions, is summarized, and potential applications are highlighted. Such 2D organic nanostructures have a brilliant future as prospective multifunctional materials, showing great promise as platforms for engineering novel optoelectronic, interfacial, and bioactive properties.

  14. Ab initio modeling of 2D layered organohalide lead perovskites

    NASA Astrophysics Data System (ADS)

    Fraccarollo, Alberto; Cantatore, Valentina; Boschetto, Gabriele; Marchese, Leonardo; Cossi, Maurizio

    2016-04-01

    A number of 2D layered perovskites A2PbI4 and BPbI4, with A and B mono- and divalent ammonium and imidazolium cations, have been modeled with different theoretical methods. The periodic structures have been optimized (both in monoclinic and in triclinic systems, corresponding to eclipsed and staggered arrangements of the inorganic layers) at the DFT level, with hybrid functionals, Gaussian-type orbitals and dispersion energy corrections. With the same methods, the various contributions to the solid stabilization energy have been discussed, separating electrostatic and dispersion energies, organic-organic intralayer interactions and H-bonding effects, when applicable. Then the electronic band gaps have been computed with plane waves, at the DFT level with scalar and full relativistic potentials, and including the correlation energy through the GW approximation. Spin orbit coupling and GW effects have been combined in an additive scheme, validated by comparing the computed gap with well known experimental and theoretical results for a model system. Finally, various contributions to the computed band gaps have been discussed on some of the studied systems, by varying some geometrical parameters and by substituting one cation in another's place.

  15. Syntheses, structures and properties of two 2-D layered hybrid organic-inorganic materials based on different V4O12 building units.

    PubMed

    Hou, Wentao; Guo, Jiuyu; Xu, Xiao; Wang, Zuoxiang; Zhang, Deng; Wan, Hongxiang; Song, You; Zhu, Dunru; Xu, Yan

    2014-01-14

    Two new layered hybrid organic-inorganic compounds [Zn(pyim)]2V4O12 () (pyim = 2-(2-pyridyl)imidazole) and [Cu(bim)2]2V4O12(H2O)·CH3CH2OH () (bim = bis(1-imidazolyl)methane) based on polyoxovanadates (POVs) and organic ligands decorated transition metal units have been synthesized by hydrothermal and solvothermal methods respectively. Single crystal XRD, fluorescence spectrum, magnetic measurement, IR spectra, powder XRD and thermogravimetric (TG) measurements were performed to analyze the structures and properties of and . The structural analysis reveals that compound features a two-dimensional {[Zn(pyim)]2V4O12}n layered structure, constructed by sine wave-like {V4O12}n(4n-) chains, Zn(2+) ions and pyim ligands. In the layered structure of , {V4O12}(4-) circles are connected by Cu(2+) ions to form {Cu(V4O12)}n(2n-) chains, which are further linked by {Cu(bim)4}(2+) subunits to generate a hybrid layer of . The magnetic susceptibility measurement indicates strong antiferromagnetic interactions between Cu(2+) ions in .

  16. Transformation from a 2D stacked layer to 3D interpenetrated framework by changing the spacer functionality: synthesis, structure, adsorption, and magnetic properties.

    PubMed

    Maji, Tapas Kumar; Ohba, Masaaki; Kitagawa, Susumu

    2005-12-12

    Two novel coordination polymers of Cu(II), viz. [Cu(bipy)(1,4-napdc)(H2O)2]n and {[Cu(bpe)1.5(1,4-napdc)](H2O)}n (bipy=4,4'-bipyridine; bpe=1,2-bis(4-pyridyl)ethane; 1,4-napdc2-=1,4-naphthalenedicarboxylate), have been synthesized and structurally characterized by changing only the pillar motifs. Both the compounds crystallize by slow evaporation from the ammoniacal solution of the as-synthesized solid. Framework 1 crystallizes in monoclinic crystal system, space group P2/n (No. 13), with a=11.028(19) A, b=11.16(3) A, c=7.678(13) A, beta=103.30(5) degrees, and Z=2. Framework 2 crystallizes in triclinic system, space group, P (No. 2), a=10.613(4) A, b=10.828(10) A, c=13.333(9) A, alpha=85.25(9) degrees, beta=82.59(6) degrees, gamma=60.37(5) degrees, and Z=2. The structure determination reveals that has a 2D network based on rectangular grids, where each Cu(II) is in 4+2 coordination mode. The 2D networks stacked in a staggered manner through the pi-pi interaction to form a 3D supramolecular network. In the case of, a {Cu(bpe)1.5}n ladder connected by 1,4-napdc2- results a 2D cuboidal bilayer network and each bilayer network is interlocked by two adjacent identical network (upper and lower) forming 3-fold interpenetrated 3D framework with small channel along the c-axis, which accommodates two water molecules. The TGA and XRPD measurements reveal that both the frameworks are stable after dehydration. Adsorption measurements (N2, CO2, and different solvents, like H2O, MeOH, etc.) were carried out for both frameworks. Framework shows type-II sorption profile with N2 in contrast to H2O and MeOH, which are chemisorbed in the framework. In case of, only H2O molecules can diffuse into the micropore, whereas N2, CO2, and MeOH cannot be adsorbed, as corroborated by the smaller channel aperture. The low-temperature (300-2 K) magnetic measurement of and reveals that both are weakly antiferromagnetically coupled (J=-1.85 cm-1, g=2.02; J=-0.153 cm-1, g=2.07), which is correlated

  17. Interferometric Motion Detection in Atomic Layer 2D Nanostructures: Visualizing Signal Transduction Efficiency and Optimization Pathways

    PubMed Central

    Wang, Zenghui; Feng, Philip X.-L.

    2016-01-01

    Atomic layer crystals are emerging building blocks for enabling new two-dimensional (2D) nanomechanical systems, whose motions can be coupled to other attractive physical properties in such 2D systems. Optical interferometry has been very effective in reading out the infinitesimal motions of these 2D structures and spatially resolving different modes. To quantitatively understand the detection efficiency and its dependence on the device parameters and interferometric conditions, here we present a systematic study of the intrinsic motion responsivity in 2D nanomechanical systems using a Fresnel-law-based model. We find that in monolayer to 14-layer structures, MoS2 offers the highest responsivity among graphene, h-BN, and MoS2 devices and for the three commonly used visible laser wavelengths (633, 532, and 405 nm). We also find that the vacuum gap resulting from the widely used 300 nm-oxide substrate in making 2D devices, fortunately, leads to close-to-optimal responsivity for a wide range of 2D flakes. Our results elucidate and graphically visualize the dependence of motion transduction responsivity upon 2D material type and number of layers, vacuum gap, oxide thickness, and detecting wavelength, thus providing design guidelines for constructing 2D nanomechanical systems with optimal optical motion readout. PMID:27464908

  18. Interferometric Motion Detection in Atomic Layer 2D Nanostructures: Visualizing Signal Transduction Efficiency and Optimization Pathways

    NASA Astrophysics Data System (ADS)

    Wang, Zenghui; Feng, Philip X.-L.

    2016-07-01

    Atomic layer crystals are emerging building blocks for enabling new two-dimensional (2D) nanomechanical systems, whose motions can be coupled to other attractive physical properties in such 2D systems. Optical interferometry has been very effective in reading out the infinitesimal motions of these 2D structures and spatially resolving different modes. To quantitatively understand the detection efficiency and its dependence on the device parameters and interferometric conditions, here we present a systematic study of the intrinsic motion responsivity in 2D nanomechanical systems using a Fresnel-law-based model. We find that in monolayer to 14-layer structures, MoS2 offers the highest responsivity among graphene, h-BN, and MoS2 devices and for the three commonly used visible laser wavelengths (633, 532, and 405 nm). We also find that the vacuum gap resulting from the widely used 300 nm-oxide substrate in making 2D devices, fortunately, leads to close-to-optimal responsivity for a wide range of 2D flakes. Our results elucidate and graphically visualize the dependence of motion transduction responsivity upon 2D material type and number of layers, vacuum gap, oxide thickness, and detecting wavelength, thus providing design guidelines for constructing 2D nanomechanical systems with optimal optical motion readout.

  19. Interferometric Motion Detection in Atomic Layer 2D Nanostructures: Visualizing Signal Transduction Efficiency and Optimization Pathways.

    PubMed

    Wang, Zenghui; Feng, Philip X-L

    2016-07-28

    Atomic layer crystals are emerging building blocks for enabling new two-dimensional (2D) nanomechanical systems, whose motions can be coupled to other attractive physical properties in such 2D systems. Optical interferometry has been very effective in reading out the infinitesimal motions of these 2D structures and spatially resolving different modes. To quantitatively understand the detection efficiency and its dependence on the device parameters and interferometric conditions, here we present a systematic study of the intrinsic motion responsivity in 2D nanomechanical systems using a Fresnel-law-based model. We find that in monolayer to 14-layer structures, MoS2 offers the highest responsivity among graphene, h-BN, and MoS2 devices and for the three commonly used visible laser wavelengths (633, 532, and 405 nm). We also find that the vacuum gap resulting from the widely used 300 nm-oxide substrate in making 2D devices, fortunately, leads to close-to-optimal responsivity for a wide range of 2D flakes. Our results elucidate and graphically visualize the dependence of motion transduction responsivity upon 2D material type and number of layers, vacuum gap, oxide thickness, and detecting wavelength, thus providing design guidelines for constructing 2D nanomechanical systems with optimal optical motion readout.

  20. Interpretive 2-D treatment of scrape-off-layer plasmas

    SciTech Connect

    Umansky, M.; Allen, A.; Daughton, W.

    1996-12-31

    The width of the scrape-off-layer in a tokamak is determined by cross field transport. In Alcator C-mod the plasma parameters in the scrape-off-layer are measured at upstream and divertor plate locations. We solve a 2-D scrape-off-layer heat conduction equation in the flux geometry (as determined by EFIT) of the C-mod experiment. Bolometric measurements are utilized for the radiative loss term. We use the end wall probe measurements of electron temperature as a boundary condition and the fast scanning probe measurements of upstream temperature are treated as constraints to determine the cross field transport and thermal conductivity. Results are compared with 1-D onion-skin-model predictions.

  1. Self-surface charge exfoliation and electrostatically coordinated 2D hetero-layered hybrids

    PubMed Central

    Yang, Min-Quan; Xu, Yi-Jun; Lu, Wanheng; Zeng, Kaiyang; Zhu, Hai; Xu, Qing-Hua; Ho, Ghim Wei

    2017-01-01

    At present, the technological groundwork of atomically thin two-dimensional (2D) hetero-layered structures realized by successive thin film epitaxial growth is in principle constrained by lattice matching prerequisite as well as low yield and expensive production. Here, we artificially coordinate ultrathin 2D hetero-layered metal chalcogenides via a highly scalable self-surface charge exfoliation and electrostatic coupling approach. Specifically, bulk metal chalcogenides are spontaneously exfoliated into ultrathin layers in a surfactant/intercalator-free medium, followed by unconstrained electrostatic coupling with a dissimilar transition metal dichalcogenide, MoSe2, into scalable hetero-layered hybrids. Accordingly, surface and interfacial-dominated photocatalysis reactivity is used as an ideal testbed to verify the reliability of diverse 2D ultrathin hetero-layered materials that reveal high visible-light photoreactivity, efficient charge transfer and intimate contact interface for stable cycling and storage purposes. Such a synthetic approach renders independent thickness and composition control anticipated to advance the development of ‘design-and-build' 2D layered heterojunctions for large-scale exploration and applications. PMID:28146147

  2. Self-surface charge exfoliation and electrostatically coordinated 2D hetero-layered hybrids

    NASA Astrophysics Data System (ADS)

    Yang, Min-Quan; Xu, Yi-Jun; Lu, Wanheng; Zeng, Kaiyang; Zhu, Hai; Xu, Qing-Hua; Ho, Ghim Wei

    2017-02-01

    At present, the technological groundwork of atomically thin two-dimensional (2D) hetero-layered structures realized by successive thin film epitaxial growth is in principle constrained by lattice matching prerequisite as well as low yield and expensive production. Here, we artificially coordinate ultrathin 2D hetero-layered metal chalcogenides via a highly scalable self-surface charge exfoliation and electrostatic coupling approach. Specifically, bulk metal chalcogenides are spontaneously exfoliated into ultrathin layers in a surfactant/intercalator-free medium, followed by unconstrained electrostatic coupling with a dissimilar transition metal dichalcogenide, MoSe2, into scalable hetero-layered hybrids. Accordingly, surface and interfacial-dominated photocatalysis reactivity is used as an ideal testbed to verify the reliability of diverse 2D ultrathin hetero-layered materials that reveal high visible-light photoreactivity, efficient charge transfer and intimate contact interface for stable cycling and storage purposes. Such a synthetic approach renders independent thickness and composition control anticipated to advance the development of `design-and-build' 2D layered heterojunctions for large-scale exploration and applications.

  3. Layer-by-Layer Assembled 2D Montmorillonite Dielectrics for Solution-Processed Electronics.

    PubMed

    Zhu, Jian; Liu, Xiaolong; Geier, Michael L; McMorrow, Julian J; Jariwala, Deep; Beck, Megan E; Huang, Wei; Marks, Tobin J; Hersam, Mark C

    2016-01-06

    Layer-by-layer assembled 2D montmorillonite nanosheets are shown to be high-performance, solution-processed dielectrics. These scalable and spatially uniform sub-10 nm thick dielectrics yield high areal capacitances of ≈600 nF cm(-2) and low leakage currents down to 6 × 10(-9) A cm(-2) that enable low voltage operation of p-type semiconducting single-walled carbon nanotube and n-type indium gallium zinc oxide field-effect transistors.

  4. Aqueous oxidation reaction enabled layer-by-layer corrosion of semiconductor nanoplates into single-crystalline 2D nanocrystals with single layer accuracy and ionic surface capping.

    PubMed

    Ji, Muwei; Xu, Meng; Zhang, Jun; Liu, Jiajia; Zhang, Jiatao

    2016-02-25

    A controllable aqueous oxidation reaction enabled layer-by-layer corrosion has been proposed to prepare high-quality two-dimensional (2D) semiconductor nanocrystals with single layer accuracy and well-retained hexagonal shapes. The appropriate oxidizing agent, such as H2O2, Fe(NO3)3, and HNO3, could not only corrode the layered-crystalline-structured Bi2Te3 nanoplates layer-by-layer to be a single quintuple layer, but also replace the organic barriers to be ionic ligands on the surface synergistically. AFM analysis was used to confirm the layer-by-layer exfoliation from the side to the center. Together with precise XRD, LRTEM and HRTEM characterizations, the controllable oxidation reaction enabled aqueous layer-by-layer corrosion mechanism has been studied.

  5. Control of electronic properties of 2D carbides (MXenes) by manipulating their transition metal layers

    DOE PAGES

    Anasori, Babak; Shi, Chenyang; Moon, Eun Ju; ...

    2016-02-24

    In this paper, a transition from metallic to semiconducting-like behavior has been demonstrated in two-dimensional (2D) transition metal carbides by replacing titanium with molybdenum in the outer transition metal (M) layers of M3C2 and M4C3 MXenes. The MXene structure consists of n + 1 layers of near-close packed M layers with C or N occupying the octahedral site between them in an [MX]nM arrangement. Recently, two new families of ordered 2D double transition metal carbides MXenes were discovered, M'2M"C2 and M'2M"2C3 – where M' and M" are two different early transition metals, such as Mo, Cr, Ta, Nb, V, andmore » Ti. The M' atoms only occupy the outer layers and the M" atoms fill the middle layers. In other words, M' atomic layers sandwich the middle M"–C layers. Using X-ray atomic pair distribution function (PDF) analysis on Mo2TiC2 and Mo2Ti2C3 MXenes, we present the first quantitative analysis of structures of these novel materials and experimentally confirm that Mo atoms are in the outer layers of the [MC]nM structures. The electronic properties of these Mo-containing MXenes are compared with their Ti3C2 counterparts, and are found to be no longer metallic-like conductors; instead the resistance increases mildly with decreasing temperatures. Density functional theory (DFT) calculations suggest that OH terminated Mo–Ti MXenes are semiconductors with narrow band gaps. Measurements of the temperature dependencies of conductivities and magnetoresistances have confirmed that Mo2TiC2Tx exhibits semiconductor-like transport behavior, while Ti3C2Tx is a metal. Finally, this finding opens new avenues for the control of the electronic and optical applications of MXenes and for exploring new applications, in which semiconducting properties are required.« less

  6. Control of electronic properties of 2D carbides (MXenes) by manipulating their transition metal layers

    SciTech Connect

    Anasori, Babak; Shi, Chenyang; Moon, Eun Ju; Xie, Yu; Voigt, Cooper A.; Kent, Paul R. C.; May, Steven J.; Billinge, Simon J. L.; Barsoum, Michel W.; Gogotsi, Yury

    2016-02-24

    In this paper, a transition from metallic to semiconducting-like behavior has been demonstrated in two-dimensional (2D) transition metal carbides by replacing titanium with molybdenum in the outer transition metal (M) layers of M3C2 and M4C3 MXenes. The MXene structure consists of n + 1 layers of near-close packed M layers with C or N occupying the octahedral site between them in an [MX]nM arrangement. Recently, two new families of ordered 2D double transition metal carbides MXenes were discovered, M'2M"C2 and M'2M"2C3 – where M' and M" are two different early transition metals, such as Mo, Cr, Ta, Nb, V, and Ti. The M' atoms only occupy the outer layers and the M" atoms fill the middle layers. In other words, M' atomic layers sandwich the middle M"–C layers. Using X-ray atomic pair distribution function (PDF) analysis on Mo2TiC2 and Mo2Ti2C3 MXenes, we present the first quantitative analysis of structures of these novel materials and experimentally confirm that Mo atoms are in the outer layers of the [MC]nM structures. The electronic properties of these Mo-containing MXenes are compared with their Ti3C2 counterparts, and are found to be no longer metallic-like conductors; instead the resistance increases mildly with decreasing temperatures. Density functional theory (DFT) calculations suggest that OH terminated Mo–Ti MXenes are semiconductors with narrow band gaps. Measurements of the temperature dependencies of conductivities and magnetoresistances have confirmed that Mo2TiC2Tx exhibits semiconductor-like transport behavior, while Ti3C2Tx is a metal. Finally, this finding opens new avenues for the control of the electronic and optical applications of MXenes and for exploring new applications, in

  7. Synchronization of semiconductor laser arrays with 2D Bragg structures

    NASA Astrophysics Data System (ADS)

    Baryshev, V. R.; Ginzburg, N. S.

    2016-08-01

    A model of a planar semiconductor multi-channel laser is developed. In this model two-dimensional (2D) Bragg mirror structures are used for synchronizing radiation of multiple laser channels. Coupling of longitudinal and transverse waves can be mentioned as the distinguishing feature of these structures. Synchronization of 20 laser channels is demonstrated with a semi-classical approach based on Maxwell-Bloch equations.

  8. Band-structure engineering in conjugated 2D polymers.

    PubMed

    Gutzler, Rico

    2016-10-26

    Conjugated polymers find widespread application in (opto)electronic devices, sensing, and as catalysts. Their common one-dimensional structure can be extended into the second dimension to create conjugated planar sheets of covalently linked molecules. Extending π-conjugation into the second dimension unlocks a new class of semiconductive polymers which as a consequence of their unique electronic properties can find usability in numerous applications. In this article the theoretical band structures of a set of conjugated 2D polymers are compared and information on the important characteristics band gap and valence/conduction band dispersion is extracted. The great variance in these characteristics within the investigated set suggests 2D polymers as exciting materials in which band-structure engineering can be used to tailor sheet-like organic materials with desired electronic properties.

  9. Structural Complexity and Phonon Physics in 2D Arsenenes.

    PubMed

    Carrete, Jesús; Gallego, Luis J; Mingo, Natalio

    2017-03-15

    In the quest for stable 2D arsenic phases, four different structures have been recently claimed to be stable. We show that, due to phonon contributions, the relative stability of those structures differs from previous reports and depends crucially on temperature. We also show that one of those four phases is in fact mechanically unstable. Furthermore, our results challenge the common assumption of an inverse correlation between structural complexity and thermal conductivity. Instead, a richer picture emerges from our results, showing how harmonic interactions, anharmonicity, and symmetries all play a role in modulating thermal conduction in arsenenes. More generally, our conclusions highlight how vibrational properties are an essential element to be carefully taken into account in theoretical searches for new 2D materials.

  10. A series of 2D metal-quinolone complexes: Syntheses, structures, and physical properties

    SciTech Connect

    He, Jiang-Hong; Xiao, Dong-Rong; Chen, Hai-Yan; Sun, Dian-Zhen; Yan, Shi-Wei; Wang, Xin; Ye, Zhong-Li; Luo, Qun-Li; Wang, En-Bo

    2013-02-15

    Six novel 2D metal-quinolone complexes, namely [Cd(cfH)(bpdc)]{center_dot}H{sub 2}O (1), [M(norfH)(bpdc)]{center_dot}H{sub 2}O (M=Cd (2) and Mn (3)), [Mn{sub 2}(cfH)(odpa)(H{sub 2}O){sub 3}]{center_dot}0.5H{sub 2}O (4), [Co{sub 2}(norfH)(bpta)({mu}{sub 2}-H{sub 2}O)(H{sub 2}O){sub 2}]{center_dot}H{sub 2}O (5) and [Co{sub 3}(saraH){sub 2}(Hbpta){sub 2}(H{sub 2}O){sub 4}]{center_dot}9H{sub 2}O (6) (cfH=ciprofloxacin, norfH=norfloxacin, saraH=sarafloxacin, bpdc=4,4 Prime -biphenyldicarboxylate, odpa=4,4 Prime -oxydiphthalate, bpta=3,3 Prime ,4,4 Prime -biphenyltetracarboxylate) have been synthesized and characterized. Compounds 1-3 consist of 2D arm-shaped layers based on the 1D {l_brace}M(COO){r_brace}{sub n}{sup n+} chains. Compounds 4 and 5 display 2D structures based on tetranuclear manganese or cobalt clusters with (3,6)-connected kgd topology. Compound 6 exhibits a 2D bilayer structure, which represents the first example of metal-quinolone complexes with 2D bilayer structure. By inspection of the structures of 1-6, it is believed that the long aromatic polycarboxylate ligands are important for the formation of 2D metal-quinolone complexes. The magnetic properties of compounds 3-6 was studied, indicating the existence of antiferromagnetic interactions. Furthermore, the luminescent properties of compounds 1-2 are discussed. - Graphical abstract: Six novel 2D metal-quinolone complexes have been prepared by self-assemblies of the quinolones and metal salts in the presence of long aromatic polycarboxylates. Highlights: Black-Right-Pointing-Pointer Compounds 1-3 consist of novel 2D arm-shaped layers based on the 1D {l_brace}M(COO){r_brace}{sub n}{sup n+} chains. Black-Right-Pointing-Pointer Compounds 4 and 5 are two novel 2D layers based on tetranuclear Mn or Co clusters with kgd topology. Black-Right-Pointing-Pointer Compound 6 is the first example of metal-quinolone complexes with 2D bilayer structure. Black-Right-Pointing-Pointer Compounds 1-6 represent six unusual

  11. Graphene band structure and its 2D Raman mode

    NASA Astrophysics Data System (ADS)

    Narula, Rohit; Reich, Stephanie

    2014-08-01

    High-precision simulations are used to generate the 2D Raman mode of graphene under a range of screening conditions and laser energies EL. We reproduce the decreasing trend of the 2D mode FWHM vs EL and the nearly linearly increasing dispersion ∂ω2D/∂EL seen experimentally in freestanding (unscreened) graphene, and propose relations between these experimentally accessible quantities and the local, two-dimensional gradients |∇ | of the electronic and TO phonon bands. In light of state-of-the-art electronic structure calculations that acutely treat the long-range e-e interactions of isolated graphene and its experimentally observed 2D Raman mode, our calculations determine a 40% greater slope of the TO phonons about K than given by explicit phonon measurements performed in graphite or GW phonon calculations in graphene. We also deduce the variation of the broadening energy γ [EL] for freestanding graphene and find a nominal value γ ˜140 meV, showing a gradually increasing trend for the range of frequencies available experimentally.

  12. Few-layer III-VI and IV-VI 2D semiconductor transistors

    NASA Astrophysics Data System (ADS)

    Sucharitakul, Sukrit; Liu, Mei; Kumar, Rajesh; Sankar, Raman; Chou, Fang C.; Chen, Yit-Tsong; Gao, Xuan

    Since the discovery of atomically thin graphene, a large variety of exfoliable 2D materials have been thoroughly explored for their exotic transport behavior and promises in technological breakthroughs. While most attention on 2D materials beyond graphene is focused on transition metal-dichalcogenides, relatively less attention is paid to layered III-VI and IV-VI semiconductors such as InSe, SnSe etc which bear stronger potential as 2D materials with high electron mobility or thermoelectric figure of merit. We will discuss our recent work on few-layer InSe 2D field effect transistors which exhibit carrier mobility approaching 1000 cm2/Vs and ON-OFF ratio exceeding 107 at room temperature. In addition, the fabrication and device performance of transistors made of mechanically exfoliated multilayer IV-VI semiconductor SnSe and SnSe2 will be discussed.

  13. Engineering 1D Quantum Stripes from Superlattices of 2D Layered Materials.

    PubMed

    Gruenewald, John H; Kim, Jungho; Kim, Heung Sik; Johnson, Jared M; Hwang, Jinwoo; Souri, Maryam; Terzic, Jasminka; Chang, Seo Hyoung; Said, Ayman; Brill, Joseph W; Cao, Gang; Kee, Hae-Young; Seo, Sung S Ambrose

    2017-01-01

    Dimensional tunability from two dimensions to one dimension is demonstrated for the first time using an artificial superlattice method in synthesizing 1D stripes from 2D layered materials. The 1D confinement of layered Sr2 IrO4 induces distinct 1D quantum-confined electronic states, as observed from optical spectroscopy and resonant inelastic X-ray scattering. This 1D superlattice approach is generalizable to a wide range of layered materials.

  14. A series of 2D metal-quinolone complexes: Syntheses, structures, and physical properties

    NASA Astrophysics Data System (ADS)

    He, Jiang-Hong; Xiao, Dong-Rong; Chen, Hai-Yan; Sun, Dian-Zhen; Yan, Shi-Wei; Wang, Xin; Ye, Zhong-Li; Luo, Qun-Li; Wang, En-Bo

    2013-02-01

    Six novel 2D metal-quinolone complexes, namely [Cd(cfH)(bpdc)]rad H2O (1), [M(norfH)(bpdc)]rad H2O (M=Cd (2) and Mn (3)), [Mn2(cfH)(odpa)(H2O)3]rad 0.5H2O (4), [Co2(norfH)(bpta)(μ2-H2O)(H2O)2]rad H2O (5) and [Co3(saraH)2(Hbpta)2(H2O)4]rad 9H2O (6) (cfH=ciprofloxacin, norfH=norfloxacin, saraH=sarafloxacin, bpdc=4,4'-biphenyldicarboxylate, odpa=4,4'-oxydiphthalate, bpta=3,3',4,4'-biphenyltetracarboxylate) have been synthesized and characterized. Compounds 1-3 consist of 2D arm-shaped layers based on the 1D {M(COO)}nn+ chains. Compounds 4 and 5 display 2D structures based on tetranuclear manganese or cobalt clusters with (3,6)-connected kgd topology. Compound 6 exhibits a 2D bilayer structure, which represents the first example of metal-quinolone complexes with 2D bilayer structure. By inspection of the structures of 1-6, it is believed that the long aromatic polycarboxylate ligands are important for the formation of 2D metal-quinolone complexes. The magnetic properties of compounds 3-6 was studied, indicating the existence of antiferromagnetic interactions. Furthermore, the luminescent properties of compounds 1-2 are discussed.

  15. Micro-structural Fluctuations in 2D Dusty Plasma Liquids

    SciTech Connect

    I Lin; Huang, Y.-H.; Teng, L.-W.

    2007-07-13

    We address structural fluctuations in a cold 2D dusty plasma liquid which is self-organized through the strong Coulomb coupling of the negatively charged micro-meter sized dust particles suspending in weakly ionized discharges. The 2D liquids consist of triangular type ordered domains surrounded by defect clusters, which can be reorganized through avalanche type hopping under the interplay of strong Coulomb coupling and thermal fluctuations. The spatio-temporal evolutions of the local bond-orientational order are directly tracked through digital optical microscopy. The power law scaling of the temporal persistence length of fluctuations is obtained for the cold liquid. The measurement of the conditional probability of the persistence lengths of the successive fluctuating cycles suggests certain types of the persistence length combinations are more preferred. The memory of persistence lasts a few fluctuating cycles.

  16. Calculation of 2D electronic band structure using matrix mechanics

    NASA Astrophysics Data System (ADS)

    Pavelich, R. L.; Marsiglio, F.

    2016-12-01

    We extend previous work, applying elementary matrix mechanics to one-dimensional periodic arrays (to generate energy bands), to two-dimensional arrays. We generate band structures for the square-lattice "2D Kronig-Penney model" (square wells), the "muffin-tin" potential (circular wells), and Gaussian wells. We then apply the method to periodic arrays of more than one atomic site in a unit cell, specifically to the case of materials with hexagonal lattices like graphene. These straightforward extensions of undergraduate-level calculations allow students to readily determine band structures of current research interest.

  17. Thermopower enhancement by fractional layer control in 2D oxide superlattices.

    PubMed

    Choi, Woo Seok; Ohta, Hiromichi; Lee, Ho Nyung

    2014-10-22

    Precise tuning of the 2D carrier density by using fractional δ-doping of d electrons improves the thermoelectric properties of oxide heterostructures. This promising result can be attributed to the anisotropic band structure in the 2D system, indicating that δ-doped oxide superlattices are good candidates for advanced thermoelectrics.

  18. Meshfree natural vibration analysis of 2D structures

    NASA Astrophysics Data System (ADS)

    Kosta, Tomislav; Tsukanov, Igor

    2014-02-01

    Determination of resonance frequencies and vibration modes of mechanical structures is one of the most important tasks in the product design procedure. The main goal of this paper is to describe a pioneering application of the solution structure method (SSM) to 2D structural natural vibration analysis problems and investigate the numerical properties of the method. SSM is a meshfree method which enables construction of the solutions to the engineering problems that satisfy exactly all prescribed boundary conditions. This method is capable of using spatial meshes that do not conform to the shape of a geometric model. Instead of using the grid nodes to enforce boundary conditions, it employs distance fields to the geometric boundaries and combines them with the basis functions and prescribed boundary conditions at run time. This defines unprecedented geometric flexibility of the SSM as well as the complete automation of the solution procedure. In the paper we will explain the key points of the SSM as well as investigate the accuracy and convergence of the proposed approach by comparing our results with the ones obtained using analytical methods or traditional finite element analysis. Despite in this paper we are dealing with 2D in-plane vibrations, the proposed approach has a straightforward generalization to model vibrations of 3D structures.

  19. 2D water layer enclathrated between Mn(II)-Ni(CN){sub 4} coordination frameworks

    SciTech Connect

    Ray, Ambarish; Bhowmick, Indrani; Sheldrick, William S.; Jana, Atish Dipankar; Ali, Mahammed

    2009-10-15

    A [Ni(CN){sub 4}]{sup 2-}based two-dimensional Mn(II) coordination polymer {l_brace}Mn(H{sub 2}O){sub 2}[NiCN]{sub 4}.4H{sub 2}O{r_brace}, in which the coordination layers are stacked on top of each other sandwiching 2D water layer of boat-shaped hexagonal water clusters has been synthesized. The complex exhibits high thermal decomposition temperature and reversible water absorption, which were clearly demonstrated by thermal and PXRD studies on the parent and rehydrated complex after dehydration. - Abstract: A coordination polymer, {l_brace}Mn(H{sub 2}O){sub 2}[NiCN]{sub 4}.4H{sub 2}O{r_brace}{sub n}, showed that the coordination layers are stacked on top of each other sandwiching 2D ice layer of boat-shaped hexagonal water clusters . Display Omitted

  20. The influence of pressure on the structure of a 2D uranium(VI) carboxyphosphonoate compound

    SciTech Connect

    Spencer, Elinor C.; Ross, Nancy L.; Surbella, Robert G.; Cahill, Christopher L.

    2014-10-15

    We report the first quantitative analysis of the structural evolution of a uranyl bearing coordination polymer in response to pressure. The material that is central to this study, (UO{sub 2})(O{sub 3}PCH{sub 2}CO{sub 2}H) (1), is constructed from rigid 2D inorganic layers comprising edge sharing UO{sub 7} pentagonal bipyramids cross-linked by [PO{sub 3}(COOH)]{sup 2−} anions. Strong hydrogen bonding interactions exist between the pendent carboxylic acid groups on adjacent layers. Under pressure, 1 exhibits compressional behaviour primarily in the direction perpendicular to the inorganic layers, which is aided by a reduction in the interlayer distance and shifting of the layers with respect to each other. The bulk modulus for the 2D compound 1 is unexpectedly high [18.1(1) GPa] and is within the range reported for 3D CPs assembled from Zn{sup II} cations and inflexible imidazolate anions, and is at the lower end of the range of moduli observed for aluminosilicate zeolites (19–59 GPa). - Graphical Abstract: The compression mechanism and elastic constants for a 2D Uranium(VI) carboxyphosphonoate compound are reported. - Highlights: • The response to pressure of a uranium carboxyphosphonoate compound has been studied. • High-pressure single-crystal XRD data for this 2D uranium compound were collected. • Elastic constants for this material have been determined. • The compression mechanism for the compound has been elucidated.

  1. 2D Heterostructure coatings of hBN-MoS2 layers for corrosion resistance

    NASA Astrophysics Data System (ADS)

    Vandana, Sajith; Kochat, Vidya; Lee, Jonghoon; Varshney, Vikas; Yazdi, Sadegh; Shen, Jianfeng; Kosolwattana, Suppanat; Vinod, Soumya; Vajtai, Robert; Roy, Ajit K.; Sekhar Tiwary, Chandra; Ajayan, P. M.

    2017-02-01

    Heterostructures of atomically thin 2D materials could have improved physical, mechanical and chemical properties as compared to its individual components. Here we report, the effect of heterostructure coatings of hBN and MoS2 on the corrosion behavior as compared to coatings employing the individual 2D layer compositions. The poor corrosion resistance of MoS2 (widely used as wear resistant coating) can be improved by incorporating hBN sheets. Depending on the atomic stacking of the 2D sheets, we can further engineer the corrosion resistance properties of these coatings. A detailed spectroscopy and microscopy analysis has been used to characterize the different combinations of layered coatings. Detailed DFT based calculation reveals that the effect on the electrical properties due to atomic stacking is one of the major reasons for the improvement seen in corrosion resistance.

  2. Comparison with Analytical Solution: Generation and Radiation of Acoustic Waves from a 2-D Shear Layer

    NASA Technical Reports Server (NTRS)

    Dahl, Milo D.

    2000-01-01

    An acoustic source inside of a 2-D jet excites an instability wave in the shear layer resulting in sound radiating away from the shear layer. Solve the linearized Euler equations to predict the sound radiation outside of the jet. The jet static pressure is assumed to be constant. The jet flow is parallel and symmetric about the x-axis. Use a symmetry boundary condition along the x-axis.

  3. HEXAGONAL ARRAY STRUCTURE FOR 2D NDE APPLICATIONS

    SciTech Connect

    Dziewierz, J.; Ramadas, S. N.; Gachagan, A.; O'Leary, R. L.

    2010-02-22

    This paper describes a combination of simulation and experimentation to evaluate the advantages offered by utilizing a hexagonal shaped array element in a 2D NDE array structure. The active material is a 1-3 connectivity piezoelectric composite structure incorporating triangular shaped pillars--each hexagonal array element comprising six triangular pillars. A combination of PZFlex, COMSOL and Matlab has been used to simulate the behavior of this device microstructure, for operation around 2.25 MHz, with unimodal behavior and low levels of mechanical cross-coupling predicted. Furthermore, the application of hexagonal array elements enables the array aperture to increase by approximately 30%, compared to a conventional orthogonal array matrix and hence will provide enhanced volumetric coverage and SNR. Prototype array configurations demonstrate good corroboration of the theoretically predicted mechanical cross-coupling between adjacent array elements (approx23 dB).

  4. Resolution of anisotropic and shielded highly conductive layers using 2-D electromagnetic modelling in the Rhine Graben and Black Forest

    NASA Astrophysics Data System (ADS)

    Tezkan, Bülent; Červ, Václav; Pek, Josef

    1992-12-01

    Anisotropy in magnetotelluric (MT) data has been found very often and has been explained as the result of local structures of different conductivities. In this paper, an observed anisotropy in MT data is not interpreted qualitatively in terms of local structures but is modelled quantitatively by a quasi-anisotropic layer. Besides the MT transfer functions, measurements of the vertical magnetic component are required. The second goal of this paper is to describe a method which permits the resolution of mid-crustal conductive layers in the presence of an additional high-conductivity layer at the surface. This method is possible in a two-dimensional (2-D) situation that limits the spatial extension of the surface structure. Again, vertical magnetic field recordings are necessary, but the phase of the E-polarization with respect to the 2-D structure is the most sensitive parameter. Using two field sites in Southern Germany, it has been possible to give a quantitative explanation of anisotropy and an improved depth resolution, and to derive an integrated conductivity of the highly conductive mid-crustal layers using MT and geomagnetic depth sounding data. The anisotropic highly conductive layer is located 12 km beneath the poorly conductive Black Forest crystalline rocks, whereas it is at a depth of 6 km beneath the highly conductive Rhine Graben sediments.

  5. 2D Radiative Transfer in Magnetically Confined Structures

    NASA Astrophysics Data System (ADS)

    Heinzel, P.; Anzer, U.

    2003-01-01

    Magnetically confined structures in the solar atmosphere exhibit a large complexity in their shapes and physical conditions. As an example, we show the case of so-called magnetic dips in prominences which are in magnetohydrostatic equilibria. For such models we solve 2D non-LTE multilevel problem for hydrogen with PRD in Lyman resonance lines. The iterative technique used is based on the MALI approach with simple diagonal ALO and SC formal solver. To compute the hydrogen ionization balance, the preconditioned MALI equations are linearized with respect to atomic level populations and electron density and solved iteratively using the Newton-Raphson scheme. Two additional problems are addressed: (i) an adequate iteration method for cases when the column-mass scale is used in one of the two dimensions but varies along the other dimension (which has a geometrical scaling); and (ii) a possibility of using AMR (Adaptive Mesh Refinement) algorithms to account for steep 2D gradients of selected variables (temperature, density, etc.).

  6. Transmission of acoustic waves through mixing layers and 2D isotropic turbulence

    NASA Astrophysics Data System (ADS)

    Juve, D.; Blanc-Benon, P.; Comte-Bellot, G.

    Ray tracing and parabolic equation methods have been used to study the properties of acoustic waves transmitted through turbulent velocity fields. A numerical simulation permits individual realizations of the turbulent field, which then allow, if desired, an ensemble averaging of the fields. Two flows have been considered, 2D isotropic turbulence and a 2D mixing layer. The following complementary aspects are developed: the occurrence of caustics, the reinforced or weakened zones of the acoustic field, the eigenrays between a source and a receiver, and the associated travel times, variances, and scintillation index.

  7. Synthesis, X-ray crystal structure, optical properties and DFT studies of a new 2D layered iodide bridged Pb(II) coordination polymer with 2,3-bis(2-pyridyl)pyrazine

    SciTech Connect

    Saghatforoush, Lotfali Bakhtiari, Akbar; Gheleji, Hojjat

    2015-01-15

    The synthesis of two dimensional (2D) coordination polymer [Pb{sub 2}(µ-I){sub 2}(µ-dpp-N,N,N,N)(µ-dpp-N,N)I{sub 2}]{sub n} (dpp=2,3-bis(2-pyridyl)pyrazine) is reported. As determined by X-ray diffraction of a twinned crystal, the dpp ligand simultaneously adopts a bis–bidentate and bis–monodentate coordination mode in the crystal structure of compound. The electronic band structure along with density of states (DOS) calculated by the DFT method indicates that the compound is an indirect band gap semiconductor. According to the DFT calculations, the observed emission of the compound at 600 nm in solid phase could be attributed to arise from an excited LLCT state (dpp-π{sup ⁎} [C-2p and N-2p states, CBs] to I-6p state [VBs]). The linear optical properties of the compound are also calculated by DFT method. The structure of the compound in solution phase is discussed based on the measured {sup 1}H NMR and fluorescence spectra in DMSO. TGA studies indicate that the compound is thermally stable up to 210 °C. - Graphical abstract: The synthesis, crystal structure and emission spectra of [Pb{sub 2}(µ-I){sub 2}(µ-dpp-N,N,N,N)(µ-dpp-N,N)I{sub 2}]{sub n} is presented. The electronic band structure and linear optical properties of the compound are calculated by the DFT method. - Highlights: • Two dimensional [Pb{sub 2}(µ-I){sub 2}(µ-dpp-N,N,N,N)(µ-dpp-N,N)I{sub 2}]{sub n} has been prepared. • The structure of the compound is determined by XRD of a twinned crystal. • DFT calculations indicate that the compound is an indirect band gap semiconductor. • As shown by DFT calculations, the emission band of the compound is LLCT. • Solution phase structure of compound is explored by {sup 1}H NMR and emission spectra.

  8. Stanene: Atomically Thick Free-standing Layer of 2D Hexagonal Tin

    PubMed Central

    Saxena, Sumit; Chaudhary, Raghvendra Pratap; Shukla, Shobha

    2016-01-01

    Stanene is one of most important of 2D materials due to its potential to demonstrate room temperature topological effects due to opening of spin-orbit gap. In this pursuit we report synthesis and investigation of optical properties of stanene up to few layers, a two-dimensional hexagonal structural analogue of graphene. Atomic scale morphological and elemental characterization using HRTEM equipped with SAED and EDAX detectors confirm the presence of hexagonal lattice of Sn atoms. The position of Raman peak along with the inter-planar ‘d’ spacing obtained from SAED for prepared samples are in good agreement with that obtained from first principles calculations and confirm that the sheets are not (111) α-Sn sheets. Further, the optical signature calculated using density functional theory at ~191 nm and ~233 nm for low buckled stanene are in qualitative agreement with the measured UV-Vis absorption spectrum. AFM measurements suggest interlayer spacing of ~0.33 nm in good agreement with that reported for epitaxial stanene sheets. No traces of oxygen were observed in the EDAX spectrum suggesting the absence of any oxidized phases. This is also confirmed by Raman measurements by comparing with oxidized stanene sheets. PMID:27492139

  9. Enhanced photon absorption in spiral nanostructured solar cells using layered 2D materials.

    PubMed

    Tahersima, Mohammad H; Sorger, Volker J

    2015-08-28

    Recent investigations of semiconducting two-dimensional (2D) transition metal dichalcogenides have provided evidence for strong light absorption relative to its thickness attributed to high density of states. Stacking a combination of metallic, insulating, and semiconducting 2D materials enables functional devices with atomic thicknesses. While photovoltaic cells based on 2D materials have been demonstrated, the reported absorption is still just a few percent of the incident light due to their sub-wavelength thickness leading to low cell efficiencies. Here we show that taking advantage of the mechanical flexibility of 2D materials by rolling a molybdenum disulfide (MoS(2))/graphene (Gr)/hexagonal boron nitride stack to a spiral solar cell allows for optical absorption up to 90%. The optical absorption of a 1 μm long hetero-material spiral cell consisting of the aforementioned hetero stack is about 50% stronger compared to a planar MoS(2) cell of the same thickness; although the volumetric absorbing material ratio is only 6%. A core-shell structure exhibits enhanced absorption and pronounced absorption peaks with respect to a spiral structure without metallic contacts. We anticipate these results to provide guidance for photonic structures that take advantage of the unique properties of 2D materials in solar energy conversion applications.

  10. Evaporative thinning: a facile synthesis method for high quality ultrathin layers of 2D crystals.

    PubMed

    Huang, Yi-Kai; Cain, Jeffrey D; Peng, Lintao; Hao, Shiqiang; Chasapis, Thomas; Kanatzidis, Mercouri G; Wolverton, Christopher; Grayson, Matthew; Dravid, Vinayak P

    2014-10-28

    The palette of two-dimensional materials has expanded beyond graphene in recent years to include the chalcogenides among other systems. However, there is a considerable paucity of methods for controlled synthesis of mono- and/or few-layer two-dimensional materials with desirable quality, reproducibility, and generality. Here we show a facile top-down synthesis approach for ultrathin layers of 2D materials down to monolayer. Our method is based on controlled evaporative thinning of initially large sheets, as deposited by vapor mass-transport. Rather than optimizing conditions for monolayer deposition, our approach makes use of selective evaporation of thick sheets to control the eventual thickness, down to a monolayer, a process which appears to be self-stopping. As a result, 2D sheets with high yield, high reproducibility, and excellent quality can be generated with large (>10 μm) and thin (∼ 1-2 nm) dimensions. Evaporative thinning promises to greatly reduce the difficulty involved in isolating large, mono- and few-layers of 2D materials for subsequent studies.

  11. Metal-organic extended 2D structures: Fe-PTCDA on Au(111).

    PubMed

    Alvarez, Lucía; Peláez, Samuel; Caillard, Renaud; Serena, Pedro A; Martín-Gago, José A; Méndez, Javier

    2010-07-30

    In this work we combine organic molecules of 3,4,9,10-perylenetetracarboxylic dianhydride (PTCDA) with iron atoms on an Au (111) substrate in ultra-high vacuum conditions at different temperatures. By means of scanning tunnelling microscopy (STM) we study the formation of stable 2D metal-organic structures. We show that at certain growth conditions (temperature, time and coverage) stable 'ladder-like' nanostructures are obtained. These are the result of connecting together two metal-organic chains through PTCDA molecules placed perpendicularly, as rungs of a ladder. These structures, stable up to 450 K, can be extended in a 2D layer covering the entire surface and presenting different rotation domains. STM images at both polarities show a contrast reversal between the two molecules at the unit cell. By means of density functional theory (DFT) calculations, we confirm the stability of these structures and that their molecular orbitals are placed separately at the different molecules.

  12. Mixing and reaction in the subsonic 2-D turbulent free shear layer

    NASA Astrophysics Data System (ADS)

    Frieler, Clifford Eugene

    spectral densities of the temperature time series were calculated and found to collapse upon normalization with the adiabatic flame temperature and large structure passage frequency. Least squares fits of the probability density functions were also examined.The initial work of Mungal and Frieler (1988) on the effects of chemical kinetics on the formation of product in the 2-D mixing layer have been greatly expanded. Measurements have been extended to include a wider range of NO concentrations and have been performed for two other stoichiometries. Results indicate that the simple model envisioned in Mungal and Frieler may only be suited for cases with extreme stoichiometry (very high or very low). Further investigations have turned up a serious discrepancy reflecting both on the experimental technique and on theory and modeling of this reacting flow. Experiments run under otherwise identical conditions demonstrate that more product is formed when F2 is the rich reactant than when H2 is the rich reactant. This dependence upon molecular character is counter intuitive and stems from a coupling of the effects of differing diffusivity and chemical kinetics. Numerical calculations based on simplified flow models are reported which demonstrate this coupling. These results indicate that even subtle diffusion effects can measurably effect reacting flows and imply that assumptions common among current modeling efforts must be re-examined.The effects of Reynolds number on mixing and reaction in the 2-D turbulent mixing layer have been examined. Evidence of the remnants of the initial roll up and mixing transition are seen for Reynolds numbers as large as 30,000. Indications of a resonance with the acoustic mode of the apparatus exist which affect results for Reynolds numbers up to 60,000. Natural transition of the high and low speed boundary layer on the splitter plate complicate comparisons of the high Reynolds number data with the remainder. In spite of all of these qualifications

  13. Assembly of 1D nanofibers into a 2D bi-layered composite nanofibrous film with different functionalities at the two layers via layer-by-layer electrospinning.

    PubMed

    Wang, Zijiao; Ma, Qianli; Dong, Xiangting; Li, Dan; Xi, Xue; Yu, Wensheng; Wang, Jinxian; Liu, Guixia

    2016-12-21

    A two-dimensional (2D) bi-layered composite nanofibrous film assembled by one-dimensional (1D) nanofibers with trifunctionality of electrical conduction, magnetism and photoluminescence has been successfully fabricated by layer-by-layer electrospinning. The composite film consists of a polyaniline (PANI)/Fe3O4 nanoparticle (NP)/polyacrylonitrile (PAN) tuned electrical-magnetic bifunctional layer on one side and a Tb(TTA)3(TPPO)2/polyvinylpyrrolidone (PVP) photoluminescent layer on the other side, and the two layers are tightly combined face-to-face together into the novel bi-layered composite film of trifunctionality. The brand-new film has totally different characteristics at the double layers. The electrical conductivity and magnetism of the electrical-magnetic bifunctional layer can be, respectively, tunable via modulating the PANI and Fe3O4 NP contents, and the highest electrical conductivity can reach up to the order of 10(-2) S cm(-1), and predominant intense green emission at 545 nm is obviously observed in the photoluminescent layer under the excitation of 357 nm single-wavelength ultraviolet light. More importantly, the luminescence intensity of the photoluminescent layer remains almost unaffected by the electrical-magnetic bifunctional layer because the photoluminescent materials have been successfully isolated from dark-colored PANI and Fe3O4 NPs. By comparing with the counterpart single-layered composite nanofibrous film, it is found that the bi-layered composite nanofibrous film has better performance. The novel bi-layered composite nanofibrous film with trifunctionality has potential in the fields of nanodevices, molecular electronics and biomedicine. Furthermore, the design conception and fabrication technique for the bi-layered multifunctional film provide a new and facile strategy towards other films of multifunctionality.

  14. Photocarrier transport in 2D macroporous silicon structures

    NASA Astrophysics Data System (ADS)

    Karachevtseva, L.; Onyshchenko, V.; Sachenko, A.

    2010-12-01

    The mechanisms of photocarrier transport through a barrier in the surface space-charge region (SCR) of 2D macroporous silicon structures have been studied at photon energies comparable to that of the silicon indirect band-to-band transition. It was found that the photoconductivity relaxation time was determined by the light modulation of barrier on the macropore surface; as a result, the relaxation itself obeyed the logarithmic law. The temperature dependence of the photoconductivity relaxation time was determined by the thermionic emission mechanism of the current transport in the SCR at temperatures T > 180 K, and by the tunnel current flow at T < 100 K, with temperature-independent tunnelling probability. The photo-emf was found to become saturated or reverse its sign to negative at temperatures below 130 K because of light absorption due to optical transitions via surface electronic states close to the silicon conduction band. In this case, the surface band bending increases due to the growth of a negative charge of the semiconductor surface. The equilibrium electrons in the bulk and photoexcited holes on the macropore surface recombine through the channel of multistage tunnel recombination between the conduction and valence bands.

  15. Molecular beam epitaxy of 2D-layered gallium selenide on GaN substrates

    NASA Astrophysics Data System (ADS)

    Lee, Choong Hee; Krishnamoorthy, Sriram; O'Hara, Dante J.; Brenner, Mark R.; Johnson, Jared M.; Jamison, John S.; Myers, Roberto C.; Kawakami, Roland K.; Hwang, Jinwoo; Rajan, Siddharth

    2017-03-01

    Large area epitaxy of two-dimensional (2D) layered materials with high material quality is a crucial step in realizing novel device applications based on 2D materials. In this work, we report high-quality, crystalline, large-area gallium selenide (GaSe) films grown on bulk substrates such as c-plane sapphire and gallium nitride (GaN) using a valved cracker source for Se. (002)-Oriented GaSe with random in-plane orientation of domains was grown on sapphire and GaN substrates at a substrate temperature of 350-450 °C with complete surface coverage. Higher growth temperature (575 °C) resulted in the formation of single-crystalline ɛ-GaSe triangular domains with six-fold symmetry confirmed by in-situ reflection high electron energy diffraction and off-axis x-ray diffraction. A two-step growth method involving high temperature nucleation of single crystalline domains and low temperature growth to enhance coalescence was adopted to obtain continuous (002)-oriented GaSe with an epitaxial relationship with the substrate. While six-fold symmetry was maintained in the two step growth, β-GaSe phase was observed in addition to the dominant ɛ-GaSe in cross-sectional scanning transmission electron microscopy images. This work demonstrates the potential of growing high quality 2D-layered materials using molecular beam epitaxy and can be extended to the growth of other transition metal chalcogenides.

  16. Single crystal diamond boron 'delta doped' nanometric layers for 2D electronic devices (Conference Presentation)

    NASA Astrophysics Data System (ADS)

    Butler, James

    2016-10-01

    Use of diamond as a semiconductor material suffers from the high activation energy of all known impurity dopants (0.37 eV for Boron, 0.6 eV for Phosphorous). To achieve the simultaneous carrier concentration and mobility desired for devices operating at room temperature, growth of a nanometric thick `delta' layer doped to above the metal insulator transition adjacent to high mobility intrinsic material can provide a 2D high mobility conduction layer. Critical to obtaining the enhanced mobility of the carriers in the layer next to the `delta' doped layer is the abruptness of the doping interface. Single and multiple nanometer thick epitaxial layers of heavily boron `delta' doped diamond have been grown on high quality, intrinsic lab grown diamond single crystals. These layers were grown in a custom microwave plasma activated chemical vapor deposition reactor based on a rapid reactant switching technique. Characterization of the `delta' layers by various analytical techniques will be presented. Electrical measurements demonstrating enhanced hole mobility (100 to 800 cm2/V sec) as well as other electrical characterizations will be presented.

  17. Numerical investigation of 3D effects on a 2D-dominated shocked mixing layer

    NASA Astrophysics Data System (ADS)

    Reese, Daniel; Weber, Christopher

    2016-11-01

    A nominally two-dimensional interface, unstable to the Rayleigh-Taylor or Richtmyer-Meshkov instability, will become three-dimensional at high Reynolds numbers due to the growth of background noise and 3D effects like vortex stretching. This three-dimensionality changes macroscopic features, such as the perturbation growth rate and mixing, as it enhances turbulent dissipation. In this study, a 2D perturbation with small-scale, 3D fluctuations is modeled using the hydrodynamics code Miranda. A Mach 1.95 shockwave accelerates a helium-over-SF6 interface, similar to the experiments of Motl et al. ["Experimental validation of a Richtmyer-Meshkov scaling law over large density ratio and shock strength ranges," Phys. Fluids 21(12), 126102 (2009)], to explore the regime where a 2D dominated flow will experience 3D effects. We report on the structure, growth, and mixing of the post-shocked interface in 2D and 3D.

  18. Evolution of vortices in 2D boundary layer and in the Couette flow

    NASA Astrophysics Data System (ADS)

    Zametaev, Vladimir B.; Gorbushin, Anton R.

    2016-10-01

    A 2D incompressible laminar boundary layer and the Couette flow having the low velocity fluctuations are considered using asymptotic methods at high Reynolds number. Two classes of solutions for the first order inviscid perturbations have been derived. The integral-differential equation with initial data describing evolution of vortices in time have been solved numerically. It was found that the discontinuities are formed in a smooth solution for a vertical velocity component with the time increase. This first type solution explains instability mechanism in the Couette flow. The second class of solutions contains a singularity at the boundary layer bottom which reminds a source-sink with a variable intensity. The singularity can absorb the fluid from the main part of the boundary layer and eject it back with a possibly "new" vorticity.

  19. Reflection high-energy electron diffraction measurements of reciprocal space structure of 2D materials.

    PubMed

    Xiang, Y; Guo, F-W; Lu, T-M; Wang, G-C

    2016-12-02

    Knowledge on the symmetry and perfection of a 2D material deposited or transferred to a surface is very important and valuable. We demonstrate a method to map the reciprocal space structure of 2D materials using reflection high energy diffraction (RHEED). RHEED from a 2D material gives rise to 'streaks' patterns. It is shown that from these streaks patterns at different azimuthal rotation angles that the reciprocal space intensity distribution can be constructed as a function of momentum transfer parallel to the surface. To illustrate the principle, we experimentally constructed the reciprocal space structure of a commercial graphene/SiO2/Si sample in which the graphene layer was transferred to the SiO2/Si substrate after it was deposited on a Cu foil by chemical vapor deposition. The result reveals a 12-fold symmetry of the graphene layer which is a result of two dominant orientation domains with 30° rotation relative to each other. We show that the graphene can serve as a template to grow other materials such as a SnS film that follows the symmetry of graphene.

  20. Deep structure of Eastern part of Bandung Basin based on 2D resistivity structure

    NASA Astrophysics Data System (ADS)

    Harja, Asep

    2013-09-01

    Bandung basin is an intramontane basin located in West Java, extending from west to east along 35 km and north to south along 15 km distance, with elevation of 660-680 m. The plain in the eastern part is the basin center with lake deposit as primary sediment filling the basin. Investigation of the subsurface structure and thickness of the basin is the main topic in this research. Beside the deeper structure of the basin, the shallow structure is also very important to be revealed since human activities are concentrated in this part. The latter is supposed to explain phenomenon related to the flood and drought that frequently occur in the area. Controlled-source audio-frequency magneto telluric (CSAMT) is a highly effective electromagnetic (EM) method to deploy in this area. Its robustness toward electromagnetic noises related to human and industrial activities particularly in the eastern part of the basin is the strong point of this method. It uses a grounded horizontal electric dipole as artificial source of electromagnetic signal that ensures data with a high signal to noise (S/N) ratio. This method is capable to map subsurface resistivity structure with high sensitivity to resistivity contras and deeper penetration. 1D inversion scheme was used to the far-field component of CSAMT data (plane wave assumption) in order to obtain resistivity cross-sections that are more suitable with the basin's structure complexity. The results show that until the depth of more than 200 m, no high resistivity structure is found. This unlikely indicated the presence of volcanic rocks beneath the area. The subsurface resistivity distribution is dominated by tens of Om, indicating that the basement comprises deep marine sediment. In addition, clay lens are also indicated in the resulting resistivity structure. Based on 2D view of resistivity cross-sections based 1D inverted and 2D inversion, it is found that a low resistivity elongation extends in southeast-northwest direction at

  1. Structural transformation in monolayer materials: a 2D to 1D transformation.

    PubMed

    Momeni, Kasra; Attariani, Hamed; LeSar, Richard A

    2016-07-20

    Reducing the dimensions of materials to atomic scales results in a large portion of atoms being at or near the surface, with lower bond order and thus higher energy. At such scales, reduction of the surface energy and surface stresses can be the driving force for the formation of new low-dimensional nanostructures, and may be exhibited through surface relaxation and/or surface reconstruction, which can be utilized for tailoring the properties and phase transformation of nanomaterials without applying any external load. Here we used atomistic simulations and revealed an intrinsic structural transformation in monolayer materials that lowers their dimension from 2D nanosheets to 1D nanostructures to reduce their surface and elastic energies. Experimental evidence of such transformation has also been revealed for one of the predicted nanostructures. Such transformation plays an important role in bi-/multi-layer 2D materials.

  2. Quasi-simultaneous interaction method for solving 2D boundary layer flows over plates and airfoils

    NASA Astrophysics Data System (ADS)

    Bijleveld, H. A.; Veldman, A. E. P.

    2012-11-01

    This paper studies unsteady 2D boundary layer flows over dented plates and a NACA 0012 airfoil. An inviscid flow is assumed to exist outside the boundary layer and is solved iteratively with the boundary layer flow together with the interaction method until a matching solution is achieved. Hereto a quasi-simultaneous interaction method is applied, in which the integral boundary layer equations are solved together with an interaction-law equation. The interaction-law equation is an approximation of the external flow and based on thin-airfoil theory. It is an algebraic relation between the velocity and displacement thickness. The interaction-law equation ensures that the eigenvalues of the system of equations do not have a sign change and that no singularities occur. Three numerical schemes are used to solve the boundary layer flow with the interaction method. These are: a standard scheme, a splitting method and a characteristics solver. All schemes use a finite difference discretization. The three schemes yield comparable results for the simulations carried out. The standard scheme is deviating most from the splitting and characteristics solvers. The results show that the eigenvalues remain positive, even in separation. As expected, the addition of the interaction-law equation prevents a sign change of the eigenvalues. The quasi-simultaneous interaction scheme is applicable to the three numerical schemes tested.

  3. Centimeter Scale Patterned Growth of Vertically Stacked Few Layer Only 2D MoS2/WS2 van der Waals Heterostructure.

    PubMed

    Choudhary, Nitin; Park, Juhong; Hwang, Jun Yeon; Chung, Hee-Suk; Dumas, Kenneth H; Khondaker, Saiful I; Choi, Wonbong; Jung, Yeonwoong

    2016-05-05

    Two-dimensional (2D) van der Waal (vdW) heterostructures composed of vertically-stacked multiple transition metal dichalcogenides (TMDs) such as molybdenum disulfide (MoS2) and tungsten disulfide (WS2) are envisioned to present unprecedented materials properties unobtainable from any other material systems. Conventional fabrications of these hybrid materials have relied on the low-yield manual exfoliation and stacking of individual 2D TMD layers, which remain impractical for scaled-up applications. Attempts to chemically synthesize these materials have been recently pursued, which are presently limited to randomly and scarcely grown 2D layers with uncontrolled layer numbers on very small areas. Here, we report the chemical vapor deposition (CVD) growth of large-area (>2 cm(2)) patterned 2D vdW heterostructures composed of few layer, vertically-stacked MoS2 and WS2. Detailed structural characterizations by Raman spectroscopy and high-resolution/scanning transmission electron microscopy (HRTEM/STEM) directly evidence the structural integrity of two distinct 2D TMD layers with atomically sharp vdW heterointerfaces. Electrical transport measurements of these materials reveal diode-like behavior with clear current rectification, further confirming the formation of high-quality heterointerfaces. The intrinsic scalability and controllability of the CVD method presented in this study opens up a wide range of opportunities for emerging applications based on the unconventional functionalities of these uniquely structured materials.

  4. Centimeter Scale Patterned Growth of Vertically Stacked Few Layer Only 2D MoS2/WS2 van der Waals Heterostructure

    NASA Astrophysics Data System (ADS)

    Choudhary, Nitin; Park, Juhong; Hwang, Jun Yeon; Chung, Hee-Suk; Dumas, Kenneth H.; Khondaker, Saiful I.; Choi, Wonbong; Jung, Yeonwoong

    2016-05-01

    Two-dimensional (2D) van der Waal (vdW) heterostructures composed of vertically-stacked multiple transition metal dichalcogenides (TMDs) such as molybdenum disulfide (MoS2) and tungsten disulfide (WS2) are envisioned to present unprecedented materials properties unobtainable from any other material systems. Conventional fabrications of these hybrid materials have relied on the low-yield manual exfoliation and stacking of individual 2D TMD layers, which remain impractical for scaled-up applications. Attempts to chemically synthesize these materials have been recently pursued, which are presently limited to randomly and scarcely grown 2D layers with uncontrolled layer numbers on very small areas. Here, we report the chemical vapor deposition (CVD) growth of large-area (>2 cm2) patterned 2D vdW heterostructures composed of few layer, vertically-stacked MoS2 and WS2. Detailed structural characterizations by Raman spectroscopy and high-resolution/scanning transmission electron microscopy (HRTEM/STEM) directly evidence the structural integrity of two distinct 2D TMD layers with atomically sharp vdW heterointerfaces. Electrical transport measurements of these materials reveal diode-like behavior with clear current rectification, further confirming the formation of high-quality heterointerfaces. The intrinsic scalability and controllability of the CVD method presented in this study opens up a wide range of opportunities for emerging applications based on the unconventional functionalities of these uniquely structured materials.

  5. Symmetry Analysis and Exact Solutions of the 2D Unsteady Incompressible Boundary-Layer Equations

    NASA Astrophysics Data System (ADS)

    Han, Zhong; Chen, Yong

    2017-01-01

    To find intrinsically different symmetry reductions and inequivalent group invariant solutions of the 2D unsteady incompressible boundary-layer equations, a two-dimensional optimal system is constructed which attributed to the classification of the corresponding Lie subalgebras. The comprehensiveness and inequivalence of the optimal system are shown clearly under different values of invariants. Then by virtue of the optimal system obtained, the boundary-layer equations are directly reduced to a system of ordinary differential equations (ODEs) by only one step. It has been shown that not only do we recover many of the known results but also find some new reductions and explicit solutions, which may be previously unknown. Supported by the Global Change Research Program of China under Grant No. 2015CB953904, National Natural Science Foundation of China under Grant Nos. 11275072, 11435005, 11675054, and Shanghai Collaborative Innovation Center of Trustworthy Software for Internet of Things under Grant No. ZF1213

  6. Oriented 2D covalent organic framework thin films on single-layer graphene.

    PubMed

    Colson, John W; Woll, Arthur R; Mukherjee, Arnab; Levendorf, Mark P; Spitler, Eric L; Shields, Virgil B; Spencer, Michael G; Park, Jiwoong; Dichtel, William R

    2011-04-08

    Covalent organic frameworks (COFs), in which molecular building blocks form robust microporous networks, are usually synthesized as insoluble and unprocessable powders. We have grown two-dimensional (2D) COF films on single-layer graphene (SLG) under operationally simple solvothermal conditions. The layered films stack normal to the SLG surface and show improved crystallinity compared with COF powders. We used SLG surfaces supported on copper, silicon carbide, and transparent fused silica (SiO(2)) substrates, enabling optical spectroscopy of COFs in transmission mode. Three chemically distinct COF films grown on SLG exhibit similar vertical alignment and long-range order, and two of these are of interest for organic electronic devices for which thin-film formation is a prerequisite for characterizing their optoelectronic properties.

  7. The effect of hydrazine intercalation on the structure and capacitance of 2D titanium carbide (MXene)

    DOE PAGES

    Mashtalir, O.; Lukatskaya, Maria R.; Kolesnikov, Alexander I.; ...

    2016-03-25

    Herein we show that hydrazine intercalation into 2D titanium carbide (Ti3C2-based MXene) results in changes in its surface chemistry by decreasing the amounts of fluorine, OH surface groups and intercalated water. It also creates a pillaring effect between Ti3C2Tx layers pre-opening the structure and improving the accessability to active sites. Furthermore, the hydrazine treated material has demonstrated a greatly improved capacitance of 250 F g–1 in acidic electrolytes with an excellent cycling ability for electrodes as thick as 75 μm.

  8. The effect of hydrazine intercalation on the structure and capacitance of 2D titanium carbide (MXene).

    PubMed

    Mashtalir, O; Lukatskaya, M R; Kolesnikov, A I; Raymundo-Piñero, E; Naguib, M; Barsoum, M W; Gogotsi, Y

    2016-04-28

    Herein we show that hydrazine intercalation into 2D titanium carbide (Ti3C2-based MXene) results in changes in its surface chemistry by decreasing the amounts of fluorine, OH surface groups and intercalated water. It also creates a pillaring effect between Ti3C2Tx layers pre-opening the structure and improving the accessability to active sites. The hydrazine treated material has demonstrated a greatly improved capacitance of 250 F g(-1) in acidic electrolytes with an excellent cycling ability for electrodes as thick as 75 μm.

  9. Acoustic Receptivity of a Blasius Boundary Layer with 2-D and Oblique Surface Waviness

    NASA Technical Reports Server (NTRS)

    King, Rudolph A.; Breuer, Kenneth S.

    2000-01-01

    An experimental investigation was conducted to examine acoustic receptivity and subsequent boundary-layer instability evolution for a Blasius boundary layer formed on a flat plate in the presence of two-dimensional (2-D) and oblique (3-D) surface waviness. The effect of the non-localized surface roughness geometry and acoustic wave amplitude on the receptivity process was explored. The surface roughness had a well defined wavenumber spectrum with fundamental wavenumber k (sub w). A planar downstream traveling acoustic wave was created to temporally excite the flow near the resonance frequency of an unstable eigenmode corresponding to k (sub ts) = k (sub w). The range of acoustic forcing levels, epsilon, and roughness heights, DELTA h, examined resulted in a linear dependence of receptivity coefficients; however, the larger values of the forcing combination epsilon dot DELTA h resulted in subsequent nonlinear development of the Tollmien-Schlichting (T-S) wave. This study provided the first experimental evidence of a marked increase in the receptivity coefficient with increasing obliqueness of the surface waviness in excellent agreement with theory. Detuning of the 2-D and oblique disturbances was investigated by varying the streamwise wall-roughness wavenumber a,, and measuring the T-S response. For the configuration where laminar-to-turbulent breakdown occurred, the breakdown process was found to be dominated by energy at the fundamental and harmonic frequencies, indicative of K-type breakdown.

  10. 2D Layered Materials of Rare-Earth Er-Doped MoS2 with NIR-to-NIR Down- and Up-Conversion Photoluminescence.

    PubMed

    Bai, Gongxun; Yuan, Shuoguo; Zhao, Yuda; Yang, Zhibin; Choi, Sin Yuk; Chai, Yang; Yu, Siu Fung; Lau, Shu Ping; Hao, Jianhua

    2016-09-01

    A 2D system of Er-doped MoS2 layered nanosheets is developed. Structural studies indicate that the Er atoms can be substitutionally introduced into MoS2 to form stable doping. Density functional theory calculation implies that the system remains stable. Both NIR-to-NIR up-conversion and down-conversion light-emissions are observed in 2D transition metal dichalcogenides, ascribed to the energy transition from Er(3+) dopants.

  11. High performance pseudocapacitor based on 2D layered metal chalcogenide nanocrystals.

    PubMed

    Muller, Guillaume A; Cook, John B; Kim, Hyung-Seok; Tolbert, Sarah H; Dunn, Bruce

    2015-03-11

    Single-layer and few-layer transition metal dichalcogenides have been extensively studied for their electronic properties, but their energy-storage potential has not been well explored. This paper describes the structural and electrochemical properties of few-layer TiS2 nanocrystals. The two-dimensional morphology leads to very different behavior, compared to corresponding bulk materials. Only small structural changes occur during lithiation/delithiation and charge storage characteristics are consistent with intercalation pseudocapacitance, leading to materials that exhibit both high energy and power density.

  12. A Large-Area Transferable Wide Band Gap 2D Silicon Dioxide Layer.

    PubMed

    Büchner, Christin; Wang, Zhu-Jun; Burson, Kristen M; Willinger, Marc-Georg; Heyde, Markus; Schlögl, Robert; Freund, Hans-Joachim

    2016-08-23

    An atomically smooth silica bilayer is transferred from the growth substrate to a new support via mechanical exfoliation at millimeter scale. The atomic structure and morphology are maintained perfectly throughout the process. A simple heating treatment results in complete removal of the transfer medium. Low-energy electron diffraction, Auger electron spectroscopy, scanning tunneling microscopy, and environmental scanning electron microscopy show the success of the transfer steps. Excellent chemical and thermal stability result from the absence of dangling bonds in the film structure. By adding this wide band gap oxide to the toolbox of 2D materials, possibilities for van der Waals heterostructures will be broadened significantly.

  13. The effect of hydrazine intercalation on the structure and capacitance of 2D titanium carbide (MXene)

    NASA Astrophysics Data System (ADS)

    Mashtalir, O.; Lukatskaya, M. R.; Kolesnikov, A. I.; Raymundo-Piñero, E.; Naguib, M.; Barsoum, M. W.; Gogotsi, Y.

    2016-04-01

    Herein we show that hydrazine intercalation into 2D titanium carbide (Ti3C2-based MXene) results in changes in its surface chemistry by decreasing the amounts of fluorine, OH surface groups and intercalated water. It also creates a pillaring effect between Ti3C2Tx layers pre-opening the structure and improving the accessability to active sites. The hydrazine treated material has demonstrated a greatly improved capacitance of 250 F g-1 in acidic electrolytes with an excellent cycling ability for electrodes as thick as 75 μm.Herein we show that hydrazine intercalation into 2D titanium carbide (Ti3C2-based MXene) results in changes in its surface chemistry by decreasing the amounts of fluorine, OH surface groups and intercalated water. It also creates a pillaring effect between Ti3C2Tx layers pre-opening the structure and improving the accessability to active sites. The hydrazine treated material has demonstrated a greatly improved capacitance of 250 F g-1 in acidic electrolytes with an excellent cycling ability for electrodes as thick as 75 μm. Electronic supplementary information (ESI) available: Characterization methods, additional XRD patterns (Fig. S1) and INS spectra (Fig. S2-S4). See DOI: 10.1039/c6nr01462c

  14. Atomic layer deposition of 1D and 2D nickel nanostructures on graphite.

    PubMed

    Ryu, Seung Wook; Yoon, Jaehong; Moon, Hyoung-Seok; Shong, Bonggeun; Kim, Hyungjun; Lee, Han-Bo-Ram

    2017-03-17

    One-dimensional (1D) nanowires (NWs) and two-dimensional (2D) thin films of Ni were deposited on highly ordered pyrolytic graphite (HOPG) by atomic layer deposition (ALD), using NH3 as a counter reactant. Thermal ALD using NH3 gas forms 1D NWs along step edges, while NH3 plasma enables the deposition of a continuous 2D film over the whole surface. The lateral and vertical growth rates of the Ni NWs are numerically modeled as a function of the number of ALD cycles. Pretreatment with NH3 gas promotes selectivity in deposition by the reduction of oxygenated functionalities on the HOPG surface. On the other hand, NH3 plasma pretreatment generates surface nitrogen species, and results in a morphological change in the basal plane of graphite, leading to active nucleation across the surface during ALD. The effects of surface nitrogen species on the nucleation of ALD Ni were theoretically studied by density functional theory calculations. Our results suggest that the properties of Ni NWs, such as their density and width, and the formation of Ni thin films on carbon surfaces can be controlled by appropriate use of NH3.

  15. Few-layer Phosphorene: An Ideal 2D Material For Tunnel Transistors.

    PubMed

    Ameen, Tarek A; Ilatikhameneh, Hesameddin; Klimeck, Gerhard; Rahman, Rajib

    2016-06-27

    2D transition metal dichalcogenides (TMDs) have attracted a lot of attention recently for energy-efficient tunneling-field-effect transistor (TFET) applications due to their excellent gate control resulting from their atomically thin dimensions. However, most TMDs have bandgaps (Eg) and effective masses (m(*)) outside the optimum range needed for high performance. It is shown here that the newly discovered 2D material, few-layer phosphorene, has several properties ideally suited for TFET applications: 1) direct Eg in the optimum range ~1.0-0.4 eV, 2) light transport m(*) (0.15 m0), 3) anisotropic m(*) which increases the density of states near the band edges, and 4) a high mobility. These properties combine to provide phosphorene TFET outstanding ION ~ 1 mA/um, ON/OFF ratio ~ 10(6) for a 15 nm channel and 0.5 V supply voltage, thereby significantly outperforming the best TMD-TFETs and CMOS in many aspects such as ON/OFF current ratio and energy-delay products. Furthermore, phosphorene TFETS can scale down to 6 nm channel length and 0.2 V supply voltage within acceptable range in deterioration of the performance metrics. Full-band atomistic quantum transport simulations establish phosphorene TFETs as serious candidates for energy-efficient and scalable replacements of MOSFETs.

  16. Computer program BL2D for solving two-dimensional and axisymmetric boundary layers

    NASA Technical Reports Server (NTRS)

    Iyer, Venkit

    1995-01-01

    This report presents the formulation, validation, and user's manual for the computer program BL2D. The program is a fourth-order-accurate solution scheme for solving two-dimensional or axisymmetric boundary layers in speed regimes that range from low subsonic to hypersonic Mach numbers. A basic implementation of the transition zone and turbulence modeling is also included. The code is a result of many improvements made to the program VGBLP, which is described in NASA TM-83207 (February 1982), and can effectively supersede it. The code BL2D is designed to be modular, user-friendly, and portable to any machine with a standard fortran77 compiler. The report contains the new formulation adopted and the details of its implementation. Five validation cases are presented. A detailed user's manual with the input format description and instructions for running the code is included. Adequate information is presented in the report to enable the user to modify or customize the code for specific applications.

  17. Few-layer Phosphorene: An Ideal 2D Material For Tunnel Transistors

    PubMed Central

    Ameen, Tarek A.; Ilatikhameneh, Hesameddin; Klimeck, Gerhard; Rahman, Rajib

    2016-01-01

    2D transition metal dichalcogenides (TMDs) have attracted a lot of attention recently for energy-efficient tunneling-field-effect transistor (TFET) applications due to their excellent gate control resulting from their atomically thin dimensions. However, most TMDs have bandgaps (Eg) and effective masses (m*) outside the optimum range needed for high performance. It is shown here that the newly discovered 2D material, few-layer phosphorene, has several properties ideally suited for TFET applications: 1) direct Eg in the optimum range ~1.0–0.4 eV, 2) light transport m* (0.15 m0), 3) anisotropic m* which increases the density of states near the band edges, and 4) a high mobility. These properties combine to provide phosphorene TFET outstanding ION ~ 1 mA/um, ON/OFF ratio ~ 106 for a 15 nm channel and 0.5 V supply voltage, thereby significantly outperforming the best TMD-TFETs and CMOS in many aspects such as ON/OFF current ratio and energy-delay products. Furthermore, phosphorene TFETS can scale down to 6 nm channel length and 0.2 V supply voltage within acceptable range in deterioration of the performance metrics. Full-band atomistic quantum transport simulations establish phosphorene TFETs as serious candidates for energy-efficient and scalable replacements of MOSFETs. PMID:27345020

  18. Atomic layer deposition of 1D and 2D nickel nanostructures on graphite

    NASA Astrophysics Data System (ADS)

    Ryu, Seung Wook; Yoon, Jaehong; Moon, Hyoung-Seok; Shong, Bonggeun; Kim, Hyungjun; Lee, Han-Bo-Ram

    2017-03-01

    One-dimensional (1D) nanowires (NWs) and two-dimensional (2D) thin films of Ni were deposited on highly ordered pyrolytic graphite (HOPG) by atomic layer deposition (ALD), using NH3 as a counter reactant. Thermal ALD using NH3 gas forms 1D NWs along step edges, while NH3 plasma enables the deposition of a continuous 2D film over the whole surface. The lateral and vertical growth rates of the Ni NWs are numerically modeled as a function of the number of ALD cycles. Pretreatment with NH3 gas promotes selectivity in deposition by the reduction of oxygenated functionalities on the HOPG surface. On the other hand, NH3 plasma pretreatment generates surface nitrogen species, and results in a morphological change in the basal plane of graphite, leading to active nucleation across the surface during ALD. The effects of surface nitrogen species on the nucleation of ALD Ni were theoretically studied by density functional theory calculations. Our results suggest that the properties of Ni NWs, such as their density and width, and the formation of Ni thin films on carbon surfaces can be controlled by appropriate use of NH3.

  19. 2D coordination polymers of macrocyclic oxamide with polycarboxylates: syntheses, crystal structures and magnetic properties.

    PubMed

    Sun, Ya-Qiu; Xu, Yan-Yan; Gao, Dong-Zhao; Zhang, Guo-Ying; Liu, Yiao-Xu; Wang, Jing; Liao, Dai-Zheng

    2012-05-14

    Five new 2D coordination polymers, [Co(nip)(CuL)(H(2)O)]·CH(3)OH (1), [Mn(ip)(NiL)]·0.63H(2)O (2), [Cu(ip)(CuL)] (3), [Mn(6)(CuL)(6)(btc)(4)(H(2)O)(4)]·7H(2)O (4), and [Cu(CuL)(Hbtc)(H(2)O)] (5)(ML, H(2)L = 2,3-dioxo-5,6,14,15-dibenzo-1,4,8,12-tetraazacyclo-pentadeca-7,13-diene; H(2)nip = 5-nitroisophthalic acid; H(2)ip = m-isophthalic acid; H(3)btc = 1,3,5-benzenetricarboxylic acid) have been synthesized by a solvothermal method and characterized by single-crystal X-ray diffraction. Complexes 1-5 exhibit different 2D layered structures formed by Co(2)Cu(2) (1), Mn(2)Ni(2) (2), Cu(4) (3), Mn(3)Ni(3) (4), Cu(4) (5) units, respectively, via the oxamide and diverse carboxylic acid bridges. Compounds 1, 2, 3 and 5 are uninodal 4-connected (4, 4)-grids topology, while complex 4 possesses a 2D network with (3, 4)-connected (4(2).8)(4)(4(3).6(2).8)(3) topology. The results of magnetic determination show pronounced antiferromagnetic interactions in 1-4.

  20. Topology-Scaling Identification of Layered Solids and Stable Exfoliated 2D Materials

    NASA Astrophysics Data System (ADS)

    Ashton, Michael; Paul, Joshua; Sinnott, Susan B.; Hennig, Richard G.

    2017-03-01

    The Materials Project crystal structure database has been searched for materials possessing layered motifs in their crystal structures using a topology-scaling algorithm. The algorithm identifies and measures the sizes of bonded atomic clusters in a structure's unit cell, and determines their scaling with cell size. The search yielded 826 stable layered materials that are considered as candidates for the formation of two-dimensional monolayers via exfoliation. Density-functional theory was used to calculate the exfoliation energy of each material and 680 monolayers emerge with exfoliation energies below those of already-existent two-dimensional materials. The crystal structures of these two-dimensional materials provide templates for future theoretical searches of stable two-dimensional materials. The optimized structures and other calculated data for all 826 monolayers are provided at our database (https://materialsweb.org).

  1. Structured luminescence conversion layer

    DOEpatents

    Berben, Dirk; Antoniadis, Homer; Jermann, Frank; Krummacher, Benjamin Claus; Von Malm, Norwin; Zachau, Martin

    2012-12-11

    An apparatus device such as a light source is disclosed which has an OLED device and a structured luminescence conversion layer deposited on the substrate or transparent electrode of said OLED device and on the exterior of said OLED device. The structured luminescence conversion layer contains regions such as color-changing and non-color-changing regions with particular shapes arranged in a particular pattern.

  2. Single-Layered Hittorf's Phosphorus: A Wide-Bandgap High Mobility 2D Material.

    PubMed

    Schusteritsch, Georg; Uhrin, Martin; Pickard, Chris J

    2016-05-11

    We propose here a two-dimensional material based on a single layer of violet or Hittorf's phosphorus. Using first-principles density functional theory, we find it to be energetically very stable, comparable to other previously proposed single-layered phosphorus structures. It requires only a small energetic cost of approximately 0.04 eV/atom to be created from its bulk structure, Hittorf's phosphorus, or a binding energy of 0.3-0.4 J/m(2) per layer, suggesting the possibility of exfoliation in experiments. We find single-layered Hittorf's phosphorus to be a wide band gap semiconductor with a direct band gap of approximately 2.5 eV, and our calculations show it is expected to have a high and highly anisotropic hole mobility with an upper bound lying between 3000-7000 cm(2) V(-1) s(-1). These combined properties make single-layered Hittorf's phosphorus a very good candidate for future applications in a wide variety of technologies, in particular for high frequency electronics, and optoelectronic devices operating in the low wavelength blue color range.

  3. 2D dynamical arrest transition in a mixed nanoparticle-phospholipid layer studied in real and momentum spaces

    NASA Astrophysics Data System (ADS)

    Orsi, Davide; Guzmán, Eduardo; Liggieri, Libero; Ravera, Francesca; Ruta, Beatrice; Chushkin, Yuriy; Rimoldi, Tiziano; Cristofolini, Luigi

    2015-12-01

    We investigate the interfacial dynamics of a 2D self-organized mixed layer made of silica nanoparticles interacting with phospholipid (DPPC) monolayers at the air/water interface. This system has biological relevance, allowing investigation of toxicological effects of nanoparticles on model membranes and lung surfactants. It might also provide bio-inspired technological solutions, exploiting the self-organization of DPPC to produce a non-trivial 2D structuration of nanoparticles. The characterization of interfacial dynamics yields information on the effects of NPs on the mechanical properties, important to improve performances of systems such as colloidosomes, foams, creams. For this, we combine micro-tracking in real-space with measurement in momentum-space via x-ray photon-correlation spectroscopy and Digital Fourier Microscopy. Using these complementary techniques, we extend the spatial range of investigation beyond the limits of each one. We find a dynamical transition from Brownian diffusion to an arrested state driven by compression, characterized by intermittent rearrangements, compatible with a repulsive glass phase. The rearrangement and relaxation of the monolayer structure results dramatically hindered by the presence of NPs, which is relevant to explain some the mechanical features observed for the dynamic surface pressure response of these systems and which can be relevant for the respiratory physiology and for future drug-delivery composite systems.

  4. 2D dynamical arrest transition in a mixed nanoparticle-phospholipid layer studied in real and momentum spaces

    PubMed Central

    Orsi, Davide; Guzmán, Eduardo; Liggieri, Libero; Ravera, Francesca; Ruta, Beatrice; Chushkin, Yuriy; Rimoldi, Tiziano; Cristofolini, Luigi

    2015-01-01

    We investigate the interfacial dynamics of a 2D self-organized mixed layer made of silica nanoparticles interacting with phospholipid (DPPC) monolayers at the air/water interface. This system has biological relevance, allowing investigation of toxicological effects of nanoparticles on model membranes and lung surfactants. It might also provide bio-inspired technological solutions, exploiting the self-organization of DPPC to produce a non-trivial 2D structuration of nanoparticles. The characterization of interfacial dynamics yields information on the effects of NPs on the mechanical properties, important to improve performances of systems such as colloidosomes, foams, creams. For this, we combine micro-tracking in real-space with measurement in momentum-space via x-ray photon-correlation spectroscopy and Digital Fourier Microscopy. Using these complementary techniques, we extend the spatial range of investigation beyond the limits of each one. We find a dynamical transition from Brownian diffusion to an arrested state driven by compression, characterized by intermittent rearrangements, compatible with a repulsive glass phase. The rearrangement and relaxation of the monolayer structure results dramatically hindered by the presence of NPs, which is relevant to explain some the mechanical features observed for the dynamic surface pressure response of these systems and which can be relevant for the respiratory physiology and for future drug-delivery composite systems. PMID:26658474

  5. High-Performance One-Body Core/Shell Nanowire Supercapacitor Enabled by Conformal Growth of Capacitive 2D WS2 Layers.

    PubMed

    Choudhary, Nitin; Li, Chao; Chung, Hee-Suk; Moore, Julian; Thomas, Jayan; Jung, Yeonwoong

    2016-12-27

    Two-dimensional (2D) transition-metal dichalcogenides (TMDs) have emerged as promising capacitive materials for supercapacitor devices owing to their intrinsically layered structure and large surface areas. Hierarchically integrating 2D TMDs with other functional nanomaterials has recently been pursued to improve electrochemical performances; however, it often suffers from limited cyclic stabilities and capacitance losses due to the poor structural integrity at the interfaces of randomly assembled materials. Here, we report high-performance core/shell nanowire supercapacitors based on an array of one-dimensional (1D) nanowires seamlessly integrated with conformal 2D TMD layers. The 1D and 2D supercapacitor components possess "one-body" geometry with atomically sharp and structurally robust core/shell interfaces, as they were spontaneously converted from identical metal current collectors via sequential oxidation/sulfurization. These hybrid supercapacitors outperform previously developed any stand-alone 2D TMD-based supercapacitors; particularly, exhibiting an exceptional charge-discharge retention over 30,000 cycles owing to their structural robustness, suggesting great potential for unconventional energy storage technologies.

  6. The development and testing of a 2D laboratory seismic modelling system for heterogeneous structure investigations

    NASA Astrophysics Data System (ADS)

    Mo, Yike; Greenhalgh, Stewart A.; Robertsson, Johan O. A.; Karaman, Hakki

    2015-05-01

    Lateral velocity variations and low velocity near-surface layers can produce strong scattered and guided waves which interfere with reflections and lead to severe imaging problems in seismic exploration. In order to investigate these specific problems by laboratory seismic modelling, a simple 2D ultrasonic model facility has been recently assembled within the Wave Propagation Lab at ETH Zurich. The simulated geological structures are constructed from 2 mm thick metal and plastic sheets, cut and bonded together. The experiments entail the use of a piezoelectric source driven by a pulse amplifier at ultrasonic frequencies to generate Lamb waves in the plate, which are detected by piezoelectric receivers and recorded digitally on a National Instruments recording system, under LabVIEW software control. The 2D models employed were constructed in-house in full recognition of the similitude relations. The first heterogeneous model features a flat uniform low velocity near-surface layer and deeper dipping and flat interfaces separating different materials. The second model is comparable but also incorporates two rectangular shaped inserts, one of low velocity, the other of high velocity. The third model is identical to the second other than it has an irregular low velocity surface layer of variable thickness. Reflection as well as transmission experiments (crosshole & vertical seismic profiling) were performed on each model. The two dominant Lamb waves recorded are the fundamental symmetric mode (non-dispersive) and the fundamental antisymmetric (flexural) dispersive mode, the latter normally being absent when the source transducer is located on a model edge but dominant when it is on the flat planar surface of the plate. Experimental group and phase velocity dispersion curves were determined and plotted for both modes in a uniform aluminium plate. For the reflection seismic data, various processing techniques were applied, as far as pre-stack Kirchhoff migration. The

  7. Structure and interaction in 2D assemblies of tobacco mosaic viruses

    SciTech Connect

    Yang, L.; Wang. S.; Masafumi, F.; Checco, A.; Zhongwei, N.; Wang, Q.

    2009-08-27

    We created two-dimensional (2D) assemblies of tobacco mosaic viruses (TMVs) and characterized their structures using Atomic Force Microscopy (AFM) and X-ray scattering. The TMVs were adsorbed on an oppositely charged, fluid lipid monolayer supported by a solid substrate and submerged in a buffer solution. The lipid monolayer confined the viral particles within a plane, while providing them with lateral mobility so that overall the TMV assembly behaved like a 2D liquid. We controlled the inter-particle interaction by adjusting the chemical condition in the buffer to induce ordered TMV assemblies. We found that the presence of the lipid layer was essential for forming ordered TMV assemblies. Packed TMV assemblies formed on the lipid layer, with an average inter-particle spacing of 42 nm. By introducing Ca2+ ions into the buffer solution, we were able to improve the in-plane order within the TMV assemblies and reduce the average inter-particle spacing to 20 nm, compared to the TMV diameter of 18 nm. Quantitative analysis of the X-ray scattering data shows that the structural order within the TMV assemblies prepared under a Ca{sup 2+}-free buffer solution is consistent with purely repulsive, electrostatic inter-particle interaction. In contrast, the structural order within Ca{sup 2+}-induced TMV assemblies is consistent with the behavior of a fluid of sticky rods, implying the presence of a strong attraction between TMVs. In addition to the screening of Coulomb repulsion, this behavior is likely the result of counterion-induced as well as membrane-mediated attractions.

  8. Structure and Interaction in 2D Assemblies of Tobacco Mosaic Viruses

    SciTech Connect

    Fukuto, M.; Yang, L.; Wang, S.; Fukuto, M.; Checco, A.; Niu, Z.; Wang, Q.

    2009-12-07

    We created two-dimensional (2D) assemblies of tobacco mosaic viruses (TMVs) and characterized their structures using Atomic Force Microscopy (AFM) and X-ray scattering. The TMVs were adsorbed on an oppositely charged, fluid lipid monolayer supported by a solid substrate and submerged in a buffer solution. The lipid monolayer confined the viral particles within a plane, while providing them with lateral mobility so that overall the TMV assembly behaved like a 2D liquid. We controlled the inter-particle interaction by adjusting the chemical condition in the buffer to induce ordered TMV assemblies. We found that the presence of the lipid layer was essential for forming ordered TMV assemblies. Packed TMV assemblies formed on the lipid layer, with an average inter-particle spacing of 42 nm. By introducing Ca{sup 2+} ions into the buffer solution, we were able to improve the in-plane order within the TMV assemblies and reduce the average inter-particle spacing to 20 nm, compared to the TMV diameter of 18 nm. Quantitative analysis of the X-ray scattering data shows that the structural order within the TMV assemblies prepared under a Ca{sup 2+}-free buffer solution is consistent with purely repulsive, electrostatic inter-particle interaction. In contrast, the structural order within Ca{sup 2+}-induced TMV assemblies is consistent with the behavior of a fluid of sticky rods, implying the presence of a strong attraction between TMVs. In addition to the screening of Coulomb repulsion, this behavior is likely the result of counterion-induced as well as membrane-mediated attractions.

  9. The effect of hydrazine intercalation on the structure and capacitance of 2D titanium carbide (MXene)

    SciTech Connect

    Mashtalir, O.; Lukatskaya, Maria R.; Kolesnikov, Alexander I.; Raymundo-Pinero, E.; Naguib, Michael; Barsoum, M. W.; Gogotsi, Yury G.

    2016-03-25

    Herein we show that hydrazine intercalation into 2D titanium carbide (Ti3C2-based MXene) results in changes in its surface chemistry by decreasing the amounts of fluorine, OH surface groups and intercalated water. It also creates a pillaring effect between Ti3C2Tx layers pre-opening the structure and improving the accessability to active sites. Furthermore, the hydrazine treated material has demonstrated a greatly improved capacitance of 250 F g–1 in acidic electrolytes with an excellent cycling ability for electrodes as thick as 75 μm.

  10. Design of 2D chitosan scaffolds via electrochemical structuring

    PubMed Central

    Altomare, Lina; Guglielmo, Elena; Varoni, Elena Maria; Bertoldi, Serena; Cochis, Andrea; Rimondini, Lia; De Nardo, Luigi

    2014-01-01

    Chitosan (CS) is a versatile biopolymer whose morphological and chemico-physical properties can be designed for a variety of biomedical applications. Taking advantage of its electrolytic nature, cathodic polarization allows CS deposition on electrically conductive substrates, resulting in thin porous structures with tunable morphology. Here we propose an easy method to obtain CS membranes with highly oriented micro-channels for tissue engineering applications, relying on simple control of process parameters and cathodic substrate geometry.   Cathodic deposition was performed on two different aluminum grids in galvanostatic conditions at 6.25 mA cm−2 from CS solution [1g L−1] in acetic acid (pH 3.5). Self-standing thin scaffolds were cross linked either with genipin or epichlorohydrin, weighted, and observed by optical and electron microscopy. Swelling properties at pH 5 and pH 7.4 have been also investigated and tensile tests performed on swollen samples at room temperature. Finally, direct and indirect assays have been performed to evaluate the cytotoxicity at 24 and 72 h. Thin scaffolds with two different oriented porosities (1000µm and 500µm) have been successfully fabricated by electrochemical techniques. Both cross-linking agents did not affected the mechanical properties and cytocompatibility of the resulting structures. Depending on the pH, these structures show interesting swelling properties that can be exploited for drug delivery systems. Moreover, thanks to the possibility of controlling the porosity and the micro-channel orientation, they should be used for the regeneration of tissues requiring a preferential cells orientation, e.g., cardiac patches or ligament regeneration. PMID:25093705

  11. Electronic structure study on 2D hydrogenated Icosagens nitride nanosheets

    NASA Astrophysics Data System (ADS)

    Ramesh, S.; Marutheeswaran, S.; Ramaclus, Jerald V.; Paul, Dolon Chapa

    2014-12-01

    Metal nitride nanosheets has attracted remarkable importance in surface catalysis due to its characteristic ionic nature. In this paper, using density functional theory, we investigate geometric stability and electronic properties of hydrogenated Icosagen nitride nanosheets. Binding energy of the sheets reveals hydrogenation is providing more stability. Band structure of the hydrogenated sheets is found to be n-type semiconductor. Partial density of states shows metals (B, Al, Ga and In) and its hydrogens dominating in the Fermi region. Mulliken charge analysis indications that hydrogenated nanosheets are partially hydridic surface nature except boron nitride.

  12. Speckle lithography for fabricating Gaussian, quasi-random 2D structures and black silicon structures

    PubMed Central

    Bingi, Jayachandra; Murukeshan, Vadakke Matham

    2015-01-01

    Laser speckle pattern is a granular structure formed due to random coherent wavelet interference and generally considered as noise in optical systems including photolithography. Contrary to this, in this paper, we use the speckle pattern to generate predictable and controlled Gaussian random structures and quasi-random structures photo-lithographically. The random structures made using this proposed speckle lithography technique are quantified based on speckle statistics, radial distribution function (RDF) and fast Fourier transform (FFT). The control over the speckle size, density and speckle clustering facilitates the successful fabrication of black silicon with different surface structures. The controllability and tunability of randomness makes this technique a robust method for fabricating predictable 2D Gaussian random structures and black silicon structures. These structures can enhance the light trapping significantly in solar cells and hence enable improved energy harvesting. Further, this technique can enable efficient fabrication of disordered photonic structures and random media based devices. PMID:26679513

  13. Speckle lithography for fabricating Gaussian, quasi-random 2D structures and black silicon structures.

    PubMed

    Bingi, Jayachandra; Murukeshan, Vadakke Matham

    2015-12-18

    Laser speckle pattern is a granular structure formed due to random coherent wavelet interference and generally considered as noise in optical systems including photolithography. Contrary to this, in this paper, we use the speckle pattern to generate predictable and controlled Gaussian random structures and quasi-random structures photo-lithographically. The random structures made using this proposed speckle lithography technique are quantified based on speckle statistics, radial distribution function (RDF) and fast Fourier transform (FFT). The control over the speckle size, density and speckle clustering facilitates the successful fabrication of black silicon with different surface structures. The controllability and tunability of randomness makes this technique a robust method for fabricating predictable 2D Gaussian random structures and black silicon structures. These structures can enhance the light trapping significantly in solar cells and hence enable improved energy harvesting. Further, this technique can enable efficient fabrication of disordered photonic structures and random media based devices.

  14. Synthesis, properties and applications of 2D layered M(III)X(VI) (M = Ga, In; X = S, Se, Te) materials.

    PubMed

    Xu, Kai; Yin, Lei; Huang, Yun; Shifa, Tofik Ahmed; Chu, Junwei; Wang, Feng; Cheng, Ruiqing; Wang, Zhenxing; He, Jun

    2016-09-29

    Group III-VI compounds M(III)X(VI) (M = Ga, In; X = S, Se, Te) are one class of important 2D layered materials and are currently attracting increasing interest due to their unique electronic and optoelectronic properties and their great potential applications in various other fields. Similar to 2D layered transition metal dichalcogenides (TMDs), M(III)X(VI) also have the significant merits of ultrathin thickness, ultrahigh surface-to-volume ratio, and high compatibility with flexible devices. More impressively, in contrast with TMDCs, M(III)X(VI) demonstrate many superior properties, such as direct band gap electronic structure, high carrier mobility, rare p-type electronic behaviors, high charge density, and so on. These unique characteristics cause high-performance device applications in electronics, optoelectronics, and optics. In this review, we aim to provide a summary of the state-of-the-art of research activities in 2D layered M(III)X(VI) materials. The scope of the review covers the synthesis and properties of 2D layered M(III)X(VI) materials and their van der Waals heterostructures. We especially focus on the applications in electronics and optoelectronics. Moreover, the review concludes with some perspectives on future developments in this field.

  15. Structure of the novel ternary hydrides Li4Tt2D (Tt=Si and Ge).

    PubMed

    Wu, Hui; Hartman, Michael R; Udovic, Terrence J; Rush, John J; Zhou, Wei; Bowman, Robert C; Vajo, John J

    2007-02-01

    The crystal structures of newly discovered Li4Ge2D and Li4Si2D ternary phases were solved by direct methods using neutron powder diffraction data. Both structures can be described using a Cmmm orthorhombic cell with all hydrogen atoms occupying Li6-octahedral interstices. The overall crystal structure and the geometry of these interstices are compared with those of other related phases, and the stabilization of this novel class of ternary hydrides is discussed.

  16. Generation and Radiation of Acoustic Waves from a 2-D Shear Layer

    NASA Technical Reports Server (NTRS)

    Agarwal, Anurag; Morris, Philip J.

    2000-01-01

    A parallel numerical simulation of the radiation of sound from an acoustic source inside a 2-D jet is presented in this paper. This basic benchmark problem is used as a test case for scattering problems that are presently being solved by using the Impedance Mismatch Method (IMM). In this technique, a solid body in the domain is represented by setting the acoustic impedance of each medium, encountered by a wave, to a different value. This impedance discrepancy results in reflected and scattered waves with appropriate amplitudes. The great advantage of the use of this method is that no modifications to a simple Cartesian grid need to be made for complicated geometry bodies. Thus, high order finite difference schemes may be applied simply to all parts of the domain. In the IMM, the total perturbation field is split into incident and scattered fields. The incident pressure is assumed to be known and the equivalent sources for the scattered field are associated with the presence of the scattering body (through the impedance mismatch) and the propagation of the incident field through a non-uniform flow. An earlier version of the technique could only handle uniform flow in the vicinity of the source and at the outflow boundary. Scattering problems in non-uniform mean flow are of great practical importance (for example, scattering from a high lift device in a non-uniform mean flow or the effects of a fuselage boundary layer). The solution to this benchmark problem, which has an acoustic wave propagating through a non-uniform mean flow, serves as a test case for the extensions of the IMM technique.

  17. Two novel Krebs-type polyoxoanions [Cu I2(WO 2) 2(β-XW 9O 33) 2] 12- (X = Sb III, Bi III) resulting in 2D layer structures linked by copper(I) ions and copper(II) complex groups

    NASA Astrophysics Data System (ADS)

    Zhang, Wei; Liu, Shuxia; Feng, Dan; Zhang, Chundan; Sun, Ping; Ma, Fengji

    2009-11-01

    Two sandwich-type organic-inorganic hybrid polyoxotungstates [enH 2] 5[Cu II(en) 2][Cu I2(WO 2) 2(β-SbW 9O 33) 2]·16H 2O ( 1) and [enH 2] 5[Cu II(en) 2][Cu I2(WO 2) 2(β-BiW 9O 33) 2]·22H 2O ( 2) (en = ethylenediamine) have been synthesized hydrothermally and structurally characterized by elemental analyses, IR spectra, thermal stability analyses, X-ray powder diffraction, and single-crystal X-ray diffraction. The polyoxoanions in 1 and 2 are composed of two trivacant (B-β-XW 9O 33) 9- (X = Sb III ( 1), Bi III ( 2)) subunits joined together by two Cu(I) ions and two W(VI) ions resulting in two novel Krebs-type sandwich structures. These polyoxoanions are further connected by Cu(I) ions and [Cu II(en) 2] 2+ coordination cations, and afford the first copper(I)-linked 2D layer structure constructed from Krebs-type polyoxotungstates. Additionally, the electrochemical behavior and electrocatalysis of 1 and 2 modified carbon paste electrodes (CPEs) have been studied. The results indicate that they have good electrocatalytic activities toward the reduction of nitrite.

  18. Crystal Structure of Human Cytochrome P450 2D6 with Prinomastat Bound*

    PubMed Central

    Wang, An; Savas, Uzen; Hsu, Mei-Hui; Stout, C. David; Johnson, Eric F.

    2012-01-01

    Human cytochrome P450 2D6 contributes to the metabolism of >15% of drugs used in clinical practice. This study determined the structure of P450 2D6 complexed with a substrate and potent inhibitor, prinomastat, to 2.85 Å resolution by x-ray crystallography. Prinomastat binding is well defined by electron density maps with its pyridyl nitrogen bound to the heme iron. The structure of ligand-bound P450 2D6 differs significantly from the ligand-free structure reported for the P450 2D6 Met-374 variant (Protein Data Bank code 2F9Q). Superposition of the structures reveals significant differences for β sheet 1, helices A, F, F′, G″, G, and H as well as the helix B-C loop. The structure of the ligand complex exhibits a closed active site cavity that conforms closely to the shape of prinomastat. The closure of the open cavity seen for the 2F9Q structure reflects a change in the direction and pitch of helix F and introduction of a turn at Gly-218, which is followed by a well defined helix F′ that was not observed in the 2F9Q structure. These differences reflect considerable structural flexibility that is likely to contribute to the catalytic versatility of P450 2D6, and this new structure provides an alternative model for in silico studies of substrate interactions with P450 2D6. PMID:22308038

  19. High-efficiency exfoliation of layered materials into 2D nanosheets in switchable CO2/Surfactant/H2O system.

    PubMed

    Wang, Nan; Xu, Qun; Xu, Shanshan; Qi, Yuhang; Chen, Meng; Li, Hongxiang; Han, Buxing

    2015-11-16

    Layered materials present attractive and important properties due to their two-dimensional (2D) structure, allowing potential applications including electronics, optoelectronics, and catalysis. However, fully exploiting the outstanding properties will require a method for their efficient exfoliation. Here we present that a series of layered materials can be successfully exfoliated into single- and few-layer nanosheets using the driving forces coming from the phase inversion, i.e., from micelles to reverse micelles in the emulsion microenvironment built by supercritical carbon dioxide (SC CO2). The effect of variable experimental parameters including CO2 pressure, ethanol/water ratio, and initial concentration of bulk materials on the exfoliation yield have been investigated. Moreover, we demonstrate that the exfoliated 2D nanosheets have their worthwhile applications, for example, graphene can be used to prepare conductive paper, MoS2 can be used as fluorescent label to perform cellular labelling, and BN can effectively reinforce polymers leading to the promising mechanical properties.

  20. High-efficiency exfoliation of layered materials into 2D nanosheets in switchable CO2/Surfactant/H2O system

    NASA Astrophysics Data System (ADS)

    Wang, Nan; Xu, Qun; Xu, Shanshan; Qi, Yuhang; Chen, Meng; Li, Hongxiang; Han, Buxing

    2015-11-01

    Layered materials present attractive and important properties due to their two-dimensional (2D) structure, allowing potential applications including electronics, optoelectronics, and catalysis. However, fully exploiting the outstanding properties will require a method for their efficient exfoliation. Here we present that a series of layered materials can be successfully exfoliated into single- and few-layer nanosheets using the driving forces coming from the phase inversion, i.e., from micelles to reverse micelles in the emulsion microenvironment built by supercritical carbon dioxide (SC CO2). The effect of variable experimental parameters including CO2 pressure, ethanol/water ratio, and initial concentration of bulk materials on the exfoliation yield have been investigated. Moreover, we demonstrate that the exfoliated 2D nanosheets have their worthwhile applications, for example, graphene can be used to prepare conductive paper, MoS2 can be used as fluorescent label to perform cellular labelling, and BN can effectively reinforce polymers leading to the promising mechanical properties.

  1. Metal Decoration Effects on the Gas-Sensing Properties of 2D Hybrid-Structures on Flexible Substrates

    PubMed Central

    Cho, Byungjin; Yoon, Jongwon; Lim, Sung Kwan; Kim, Ah Ra; Choi, Sun-Young; Kim, Dong-Ho; Lee, Kyu Hwan; Lee, Byoung Hun; Ko, Heung Cho; Hahm, Myung Gwan

    2015-01-01

    We have investigated the effects of metal decoration on the gas-sensing properties of a device with two-dimensional (2D) molybdenum disulfide (MoS2) flake channels and graphene electrodes. The 2D hybrid-structure device sensitively detected NO2 gas molecules (>1.2 ppm) as well as NH3 (>10 ppm). Metal nanoparticles (NPs) could tune the electronic properties of the 2D graphene/MoS2 device, increasing sensitivity to a specific gas molecule. For instance, palladium NPs accumulate hole carriers of graphene/MoS2, electronically sensitizing NH3 gas molecules. Contrarily, aluminum NPs deplete hole carriers, enhancing NO2 sensitivity. The synergistic combination of metal NPs and 2D hybrid layers could be also applied to a flexible gas sensor. There was no serious degradation in the sensing performance of metal-decorated MoS2 flexible devices before/after 5000 bending cycles. Thus, highly sensitive and endurable gas sensor could be achieved through the metal-decorated 2D hybrid-structure, offering a useful route to wearable electronic sensing platforms. PMID:26404279

  2. Mercury (I) nitroprusside: A 2D structure supported on homometallic interactions

    SciTech Connect

    Osiry, H.; Cano, A.; Reguera, L.; Lemus-Santana, A.A.; Reguera, E.

    2015-01-15

    The pentacyanonitrosylferrate complex anion, [Fe(CN){sub 5}NO]{sup 2−}, forms an insoluble solid with Hg(I) ion, of formula unit Hg{sub 2}[Fe(CN){sub 5}NO]·2H{sub 2}O, whose crystal structure and related properties are unknown. This contribution reports the preparation of that compound by the precipitation method and its structural study from X-ray powder patterns complemented with spectroscopic information from IR, Raman, and UV–vis techniques. The crystal structure was solved ab initio and then refined using the Rietveld method. The solid crystallizes with a triclinic unit cell, in the P−1 space group, with cell parameters a=10.1202(12), b=10.1000(13), c=7.4704(11) Å; α=110.664(10), β=110.114(10), γ=104.724(8) °. Within the unit cell, two formula units are accommodated (Z=2). It adopts a layered structure related with the coordination of the equatorial CN groups at their N end to the Hg atoms while the axial CN ligand remains unlinked. Within the layers neighboring Hg{sub 2}[Fe(CN){sub 5}NO] building units remain linked through four relatively strong Hg–Hg interactions, with an interatomic distance of 2.549(3) Å. The charge donation from the equatorial CN groups through their 5σ orbitals results into an increase for the electron density on the Hg atoms, which strengths the Hg–Hg bond. In the Raman spectrum, that metal–metal bond is detected as a stretching vibration band at 167 cm{sup −1}. The available free volume between neighboring layers accommodates two water molecules, which are stabilized within the framework through hydrogen bonds with the N end of the unlinked axial CN group. The removal of these weakly bonded water molecules results in structural disorder for the material 3D framework. - Graphical abstract: Assembling of Hg{sub 2}[Fe(CN){sub 5}NO] units through Hg–Hg interactions. - Highlights: • Homometallic Hg–Hg interactions in metal nitroprusside. • 2D structure supported on metal–metal interactions. • Crystal

  3. High-pressure melt growth and transport properties of SiP, SiAs, GeP, and GeAs 2D layered semiconductors

    NASA Astrophysics Data System (ADS)

    Barreteau, C.; Michon, B.; Besnard, C.; Giannini, E.

    2016-06-01

    Silicon and Germanium monopnictides SiP, SiAs, GeP and GeAs form a family of 2D layered semiconductors. We have succeeded in growing bulk single crystals of these compounds by melt-growth under high pressure (0.5-1 GPa) in a cubic anvil hot press. Large (mm-size), shiny, micaceous crystals of GeP, GeAs and SiAs were obtained, and could be exfoliated into 2D flakes. Small and brittle crystals of SiP were yielded by this method. High-pressure sintered polycrystalline SiP and GeAs have also been successfully used as a precursor in the Chemical Vapor Transport growth of these crystals in the presence of I2 as a transport agent. All compounds are found to crystallize in the expected layered structure and do not undergo any structural transition at low temperature, as shown by Raman spectroscopy down to T=5 K. All materials exhibit a semiconducting behavior. The electrical resistivity of GeP, GeAs and SiAs is found to depend on temperature following a 2D-Variable Range Hopping conduction mechanism. The availability of bulk crystals of these compounds opens new perspectives in the field of 2D semiconducting materials for device applications.

  4. Fabrication of high efficiency compact 90° bend waveguide by using a dielectric 2D-PC structure

    NASA Astrophysics Data System (ADS)

    Stomeo, Tiziana; Bergamo, Roberto; Martiradonna, Luigi; Cingolani, Roberto; De Vittorio, Massimo; D'Orazio, Antonella; Marrocco, Valeria

    2005-07-01

    In this paper we propose the design and the fabrication of 90° bend ridge waveguide (WG) assisted by a two-dimensional photonic crystal (2D-PC). 2D-PCs act as efficient mirrors along the boundaries of the bend ridge thus reducing the in-plane losses. The ridge waveguide consists of a 3 μm x 0.75 μm titanium dioxide core on a silica bottom cladding. The 2D-PC structure surrounding the bend waveguide is composed of a triangular array of circular dielectric pillars having a height of 0.75 μm. The titanium dioxide waveguiding core layer is covered with PMMA in order to create a quasi-symmetric structure. A photonic band gap centered around 1.3 μm is obtained by a PC radius r = 0.33a and lattice period a = 0.450 μm. The design of the whole structure is subsequently optimized by using a 3D Finite Difference Time Domain based computer code. The ridge waveguide assisted by a 2D-PC has been fabricated by using electron beam lithography and reactive ion etching. For the pattern transfer we have used about 50 nm thin layer Cr metal etch mask obtained by means of a lift-off technique based on the use of bi-layer resist (PMMA/MMA). The presence of the 2D-PC around the bend waveguide leads to a sharp increase of the transmission efficiency around 1.3 μm for curvature radius of 2.5 μm. The bend transmission results to be in the range between 0.76 and 0.85 when the thickness of the ridge WG and of the 2D-PC pillars is between 0.75 and 1.3 μm. This value is more than twice with respect to the bend waveguide without 2D-PC.

  5. Layer-by-Layer Polyelectrolyte Assisted Growth of 2D Ultrathin MoS2 Nanosheets on Various 1D Carbons for Superior Li-Storage.

    PubMed

    Qu, Qunting; Qian, Feng; Yang, Siming; Gao, Tian; Liu, Weijie; Shao, Jie; Zheng, Honghe

    2016-01-20

    Transitional metal sulfide/carbon hybrids with well-defined structures could not only maximize the functional properties of each constituent but engender some unique synergistic effects, holding great promise for applications in Li-ion batteries and supercapacitors and for catalysis. Herein, a facile and versatile approach is developed to controllably grow 2D ultrathin MoS2 nanosheets with a large quantity of exposed edges onto various 1D carbons, including carbon nanotubes (CNTs), electrospun carbon nanofibers, and Te-nanowire-templated carbon nanofibers. The typical approach involves the employment of layer-by-layer (LBL) self-assembled polyelectrolyte, which controls spatially the uniform growth and orientation of ultrathin MoS2 nanosheets on these 1D carbons irrespective of their surface properties. Such unique structures of the as-prepared CNTs@MoS2 hybrid are significantly favorable for the fast diffusions of both Li-ions and electrons, satisfying the kinetic requirements of high-power lithium ion batteries. As a result, CNTs@MoS2 hybrids exhibit excellent electrochemical performances for lithium storage, including a high reversible capacity (1027 mAh g(-1)), high-rate capability (610 mAh g(-1) at 5 C), and excellent cycling stability (negligible capacity loss after 200 continuous cycles).

  6. Laser fabrication of 2D and 3D metal nanoparticle structures and arrays.

    PubMed

    Kuznetsov, A I; Kiyan, R; Chichkov, B N

    2010-09-27

    A novel method for fabrication of 2D and 3D metal nanoparticle structures and arrays is proposed. This technique is based on laser-induced transfer of molten metal nanodroplets from thin metal films. Metal nanoparticles are produced by solidification of these nanodroplets. The size of the transferred nanoparticles can be controllably changed in the range from 180 nm to 1500 nm. Several examples of complex 2D and 3D microstructures generated form gold nanoparticles are demonstrated.

  7. Photo-and Electro-Switchable 1/2D Diffractive Structures Exploiting Soft-Matter

    DTIC Science & Technology

    2013-05-01

    again, a linear red-shift is observed, which clearly confirms that the behavior reported in Figure 4a is due to a photo - thermal mechanism; furthermore...AFRL-AFOSR-UK-TR-2013-0022 Photo -and Electro-Switchable 1/2D Diffractive Structures Exploiting Soft-Matter Luciano De Sio...TYPE Final Report 3. DATES COVERED (From – To) 14 November 2011 – 13 November 2012 4. TITLE AND SUBTITLE Photo -and Electro-Switchable 1/2D

  8. Layered ternary M n+1AX n phases and their 2D derivative MXene: an overview from a thin-film perspective

    NASA Astrophysics Data System (ADS)

    Eklund, Per; Rosen, Johanna; Persson, Per O. Å.

    2017-03-01

    Inherently and artificially layered materials are commonly investigated both for fundamental scientific purposes and for technological application. When a layered material is thinned or delaminated to its physical limits, a two-dimensional (2D) material is formed and exhibits novel properties compared to its bulk parent phase. The complex layered phases known as ‘MAX phases’ (where M  =  early transition metal, A  =  A-group element, e.g. Al or Si, and X  =  C or N) are an exciting model system for materials design and the understanding of process-structure-property relationships. When the A layers are selectively etched from the MAX phases, a new type of 2D material is formed, named MXene to emphasize the relation to the MAX phases and the parallel with graphene. Since their discovery in 2011, MXenes have rapidly become established as a novel class of 2D materials with remarkable possibilities for composition variations and property tuning. This article gives a brief overview of MAX phases and MXene from a thin-film perspective, reviewing theory, characterization by electron microscopy, properties and how these are affected by the change in dimensionality, and outstanding challenges.

  9. Postretinal Structure and Function in Severe Congenital Photoreceptor Blindness Caused by Mutations in the GUCY2D Gene

    PubMed Central

    Aguirre, Geoffrey K.; Butt, Omar H.; Datta, Ritobrato; Roman, Alejandro J.; Sumaroka, Alexander; Schwartz, Sharon B.; Cideciyan, Artur V.; Jacobson, Samuel G.

    2017-01-01

    Purpose To examine how severe congenital blindness resulting from mutations of the GUCY2D gene alters brain structure and function, and to relate these findings to the notable preservation of retinal architecture in this form of Leber congenital amaurosis (LCA). Methods Six GUCY2D-LCA patients (ages 20–46) were studied with optical coherence tomography of the retina and multimodal magnetic resonance imaging (MRI) of the brain. Measurements from this group were compared to those obtained from populations of normally sighted controls and people with congenital blindness of a variety of causes. Results Patients with GUCY2D-LCA had preservation of the photoreceptors, ganglion cells, and nerve fiber layer. Despite this, visual function in these patients ranged from 20/160 acuity to no light perception, and functional MRI responses to light stimulation were attenuated and restricted. This severe visual impairment was reflected in substantial thickening of the gray matter layer of area V1, accompanied by an alteration of resting-state correlations within the occipital lobe, similar to a comparison group of congenitally blind people with structural damage to the retina. In contrast to the comparison blind population, however, the GUCY2D-LCA group had preservation of the size of the optic chiasm, and the fractional anisotropy of the optic radiations as measured with diffusion tensor imaging was also normal. Conclusions These results identify dissociable effects of blindness upon the visual pathway. Further, the relatively intact postgeniculate white matter pathway in GUCY2D-LCA is encouraging for the prospect of recovery of visual function with gene augmentation therapy.

  10. Generation and Radiation of Acoustic Waves from a 2-D Shear Layer using the CE/SE Method

    NASA Technical Reports Server (NTRS)

    Loh, Ching Y.; Wang, Xiao Y.; Chang, Sin-Chung; Jorgenson, Philip C. E.

    2000-01-01

    In the present work, the generation and radiation of acoustic waves from a 2-D shear layer problem is considered. An acoustic source inside of a 2-D jet excites an instability wave in the shear layer, resulting in sound Mach radiation. The numerical solution is obtained by solving the Euler equations using the space time conservation element and solution element (CE/SE) method. Linearization is achieved through choosing a small acoustic source amplitude. The Euler equations are nondimensionalized as instructed in the problem statement. All other conditions are the same except that the Crocco's relation has a slightly different form. In the following, after a brief sketch of the CE/SE method, the numerical results for this problem are presented.

  11. Robustness of reduced-order observer-based controllers in transitional 2D Blasius boundary layers

    NASA Astrophysics Data System (ADS)

    Belson, Brandt; Semeraro, Onofrio; Rowley, Clarence; Pralits, Jan; Henningson, Dan

    2011-11-01

    In this work, we seek to delay transition in the Blasius boundary layer. We trip the flow with an upstream disturbance and dampen the growth of the resulting structures downstream. The observer-based controllers use a single sensor and a single localized body force near the wall. To formulate the controllers, we first find a reduced-order model of the system via the Eigensystem Realization Algorithm (ERA), then find the H2 optimal controller for this reduced-order system. We find the resulting controllers are effective only when the sensor is upstream of the actuator (in a feedforward configuration), but as is expected, are sensitive to model uncertainty. When the sensor is downstream of the actuator (in a feedback configuration), the reduced-order observer-based controllers are not robust and ineffective on the full system. In order to investigate the robustness properties of the system, an iterative technique called the adjoint of the direct adjoint (ADA) is employed to find a full-dimensional H2 optimal controller. This avoids the reduced-order modelling step and serves as a reference point. ADA is promising for investigating the lack of robustness previously mentioned.

  12. Structure-From-Motion in 3D Space Using 2D Lidars

    PubMed Central

    Choi, Dong-Geol; Bok, Yunsu; Kim, Jun-Sik; Shim, Inwook; Kweon, In So

    2017-01-01

    This paper presents a novel structure-from-motion methodology using 2D lidars (Light Detection And Ranging). In 3D space, 2D lidars do not provide sufficient information for pose estimation. For this reason, additional sensors have been used along with the lidar measurement. In this paper, we use a sensor system that consists of only 2D lidars, without any additional sensors. We propose a new method of estimating both the 6D pose of the system and the surrounding 3D structures. We compute the pose of the system using line segments of scan data and their corresponding planes. After discarding the outliers, both the pose and the 3D structures are refined via nonlinear optimization. Experiments with both synthetic and real data show the accuracy and robustness of the proposed method. PMID:28165372

  13. Probing the 2-D Kinematic Structure of Early-Type Galaxies Out to 3 Effective Radii

    NASA Astrophysics Data System (ADS)

    Proctor, Robert N.; Forbes, Duncan A.; Romanowsky, Aaron J.; Brodie, Jean P.; Strader, Jay; Spolaor, Max; Trevor Mendel, J.; Spitler, Lee

    2010-06-01

    We detail an innovative new technique for measuring the 2-D velocity moments (rotation velocity, velocity dispersion and Gauss-Hermite coefficients h3 and h4) using spectra from Keck DEIMOS multi-object spectroscopic observations. The data are used to reconstruct 2-D rotation velocity maps. Here we present data for one of five early-type galaxies whose kinematics we have measured out to ~3 effective radii (see [1]). From these data 2D kinematic maps are constructed. We show such analyses can provide significant insights into the global kinematic structure of galaxies, and, in some cases, challenge the accepted morphological classification. Our results are of particular importance to studies which attempt to classify galaxies by their kinematic structure within one effective radius, such as the recent definition of fast- and slow- rotator classes by the SAURON project.

  14. Interferometric 2D Sum Frequency Generation Spectroscopy Reveals Structural Heterogeneity of Catalytic Monolayers on Transparent Materials.

    PubMed

    Vanselous, Heather; Stingel, Ashley M; Petersen, Poul B

    2017-02-16

    Molecular monolayers exhibit structural and dynamical properties that are different from their bulk counterparts due to their interaction with the substrate. Extracting these distinct properties is crucial for a better understanding of processes such as heterogeneous catalysis and interfacial charge transfer. Ultrafast nonlinear spectroscopic techniques such as 2D infrared (2D IR) spectroscopy are powerful tools for understanding molecular dynamics in complex bulk systems. Here, we build on technical advancements in 2D IR and heterodyne-detected sum frequency generation (SFG) spectroscopy to study a CO2 reduction catalyst on nanostructured TiO2 with interferometric 2D SFG spectroscopy. Our method combines phase-stable heterodyne detection employing an external local oscillator with a broad-band pump pulse pair to provide the first high spectral and temporal resolution 2D SFG spectra of a transparent material. We determine the overall molecular orientation of the catalyst and find that there is a static structural heterogeneity reflective of different local environments at the surface.

  15. Insights into the growth rate of spatially evolving plane turbulent free-shear layers from 2D vortex-gas simulations

    NASA Astrophysics Data System (ADS)

    Suryanarayanan, Saikishan; Narasimha, Roddam

    2017-02-01

    the quasi-2D large-scale structures known to be a characteristic of plane mixing layers.

  16. Drag of a turbulent boundary layer with transverse 2D circular rods on the wall

    NASA Astrophysics Data System (ADS)

    Kamruzzaman, Md; Djenidi, L.; Antonia, R. A.; Talluru, K. M.

    2015-06-01

    In this paper, we present the results of a turbulent boundary layer developing over a rod-roughened wall with a spacing of ( is the spacing between two adjacent roughness elements, and is the rod diameter). Static pressure measurements are taken around a single roughness element to accurately determine the friction velocity, and the error in the origin, , which are the two prominent issues that surround rough-wall boundary layers. In addition, velocity measurements are taken at several streamwise locations using hot-wire anemometry to obtain from the momentum integral equation. Results showed that both methods give consistent values for , indicating that the contribution of the viscous drag over this rough wall is negligible. This supports the results of Perry et al. (J Fluid Mech 177:437-466, 1969) and Antonia and Luxton (J Fluid Mech 48(04):721-761, 1971) in a boundary layer and of Leonardi et al. (2003) in a channel flow but does not agree with those of Furuya et al. (J Fluids Eng 98(4):635-643, 1976). The results show that both and can be unambiguously measured on this particular rough wall. This paves the way for a proper comparison between the boundary layer developing over this wall and the smooth-wall turbulent boundary layer.

  17. Chromatic Mechanical Response in 2-D Layered Transition Metal Dichalcogenide (TMDs) based Nanocomposites

    NASA Astrophysics Data System (ADS)

    Rahneshin, Vahid; Khosravi, Farhad; Ziolkowska, Dominika A.; Jasinski, Jacek B.; Panchapakesan, Balaji

    2016-10-01

    The ability to convert photons of different wavelengths directly into mechanical motion is of significant interest in many energy conversion and reconfigurable technologies. Here, using few layer 2H-MoS2 nanosheets, layer by layer process of nanocomposite fabrication, and strain engineering, we demonstrate a reversible and chromatic mechanical response in MoS2-nanocomposites between 405 nm to 808 nm with large stress release. The chromatic mechanical response originates from the d orbitals and is related to the strength of the direct exciton resonance A and B of the few layer 2H-MoS2 affecting optical absorption and subsequent mechanical response of the nanocomposite. Applying uniaxial tensile strains to the semiconducting few-layer 2H-MoS2 crystals in the nanocomposite resulted in spatially varying energy levels inside the nanocomposite that enhanced the broadband optical absorption up to 2.3 eV and subsequent mechanical response. The unique photomechanical response in 2H-MoS2 based nanocomposites is a result of the rich d electron physics not available to nanocomposites based on sp bonded graphene and carbon nanotubes, as well as nanocomposite based on metallic nanoparticles. The reversible strain dependent optical absorption suggest applications in broad range of energy conversion technologies that is not achievable using conventional thin film semiconductors.

  18. Chromatic Mechanical Response in 2-D Layered Transition Metal Dichalcogenide (TMDs) based Nanocomposites

    PubMed Central

    Rahneshin, Vahid; Khosravi, Farhad; Ziolkowska, Dominika A.; Jasinski, Jacek B.; Panchapakesan, Balaji

    2016-01-01

    The ability to convert photons of different wavelengths directly into mechanical motion is of significant interest in many energy conversion and reconfigurable technologies. Here, using few layer 2H-MoS2 nanosheets, layer by layer process of nanocomposite fabrication, and strain engineering, we demonstrate a reversible and chromatic mechanical response in MoS2-nanocomposites between 405 nm to 808 nm with large stress release. The chromatic mechanical response originates from the d orbitals and is related to the strength of the direct exciton resonance A and B of the few layer 2H-MoS2 affecting optical absorption and subsequent mechanical response of the nanocomposite. Applying uniaxial tensile strains to the semiconducting few-layer 2H-MoS2 crystals in the nanocomposite resulted in spatially varying energy levels inside the nanocomposite that enhanced the broadband optical absorption up to 2.3 eV and subsequent mechanical response. The unique photomechanical response in 2H-MoS2 based nanocomposites is a result of the rich d electron physics not available to nanocomposites based on sp bonded graphene and carbon nanotubes, as well as nanocomposite based on metallic nanoparticles. The reversible strain dependent optical absorption suggest applications in broad range of energy conversion technologies that is not achievable using conventional thin film semiconductors. PMID:27713550

  19. Chromatic Mechanical Response in 2-D Layered Transition Metal Dichalcogenide (TMDs) based Nanocomposites.

    PubMed

    Rahneshin, Vahid; Khosravi, Farhad; Ziolkowska, Dominika A; Jasinski, Jacek B; Panchapakesan, Balaji

    2016-10-07

    The ability to convert photons of different wavelengths directly into mechanical motion is of significant interest in many energy conversion and reconfigurable technologies. Here, using few layer 2H-MoS2 nanosheets, layer by layer process of nanocomposite fabrication, and strain engineering, we demonstrate a reversible and chromatic mechanical response in MoS2-nanocomposites between 405 nm to 808 nm with large stress release. The chromatic mechanical response originates from the d orbitals and is related to the strength of the direct exciton resonance A and B of the few layer 2H-MoS2 affecting optical absorption and subsequent mechanical response of the nanocomposite. Applying uniaxial tensile strains to the semiconducting few-layer 2H-MoS2 crystals in the nanocomposite resulted in spatially varying energy levels inside the nanocomposite that enhanced the broadband optical absorption up to 2.3 eV and subsequent mechanical response. The unique photomechanical response in 2H-MoS2 based nanocomposites is a result of the rich d electron physics not available to nanocomposites based on sp bonded graphene and carbon nanotubes, as well as nanocomposite based on metallic nanoparticles. The reversible strain dependent optical absorption suggest applications in broad range of energy conversion technologies that is not achievable using conventional thin film semiconductors.

  20. A numerical method for computing unsteady 2-D boundary layer flows

    NASA Technical Reports Server (NTRS)

    Krainer, Andreas

    1988-01-01

    A numerical method for computing unsteady two-dimensional boundary layers in incompressible laminar and turbulent flows is described and applied to a single airfoil changing its incidence angle in time. The solution procedure adopts a first order panel method with a simple wake model to solve for the inviscid part of the flow, and an implicit finite difference method for the viscous part of the flow. Both procedures integrate in time in a step-by-step fashion, in the course of which each step involves the solution of the elliptic Laplace equation and the solution of the parabolic boundary layer equations. The Reynolds shear stress term of the boundary layer equations is modeled by an algebraic eddy viscosity closure. The location of transition is predicted by an empirical data correlation originating from Michel. Since transition and turbulence modeling are key factors in the prediction of viscous flows, their accuracy will be of dominant influence to the overall results.

  1. A fast and accurate method to predict 2D and 3D aerodynamic boundary layer flows

    NASA Astrophysics Data System (ADS)

    Bijleveld, H. A.; Veldman, A. E. P.

    2014-12-01

    A quasi-simultaneous interaction method is applied to predict 2D and 3D aerodynamic flows. This method is suitable for offshore wind turbine design software as it is a very accurate and computationally reasonably cheap method. This study shows the results for a NACA 0012 airfoil. The two applied solvers converge to the experimental values when the grid is refined. We also show that in separation the eigenvalues remain positive thus avoiding the Goldstein singularity at separation. In 3D we show a flow over a dent in which separation occurs. A rotating flat plat is used to show the applicability of the method for rotating flows. The shown capabilities of the method indicate that the quasi-simultaneous interaction method is suitable for design methods for offshore wind turbine blades.

  2. Controlling turbulent boundary layer separation using biologically inspired 2D transverse grooves

    NASA Astrophysics Data System (ADS)

    Lang, Amy; Jones, Emily; Afroz, Farhana

    2013-11-01

    It is theorized that the presence of grooves, such as the sinusoidal ones found on dolphin skin or the cavities that form between bristled shark skin scales, can lead to induced boundary layer mixing and result in the control of turbulent boundary layer separation. To test this hypothesis, a series of water tunnel experiments using DPIV studied the characteristics of a flat plate turbulent boundary layer whereby a rotating cylinder was used to induce an adverse pressure gradient and resulting flow separation. The experiments were repeated with the use of a plate covered with two types of grooves, rectangular and sinusoidal, with a spacing of 2 mm in size. Flow similarity of the cavity flow was preserved between the experiments and flow over bristled shark skin scales. Both geometries resulted in a reduction of flow separation as measured by backflow coefficient. In addition, Reynolds stress profiles showed that as the pressure gradient was increased, the sinusoidal geometry outperformed the rectangular grooves in terms of increased mixing close to the wall. The sinusoidal plate also generated a lower momentum deficit within the boundary layer which would indicate a smaller drag penalty. Support from NSF grant CBET 0932352 and a UA Graduate Council Fellowship is gratefully acknowledged.

  3. Few-layer, large-area, 2D covalent organic framework semiconductor thin films.

    PubMed

    Feldblyum, Jeremy I; McCreery, Clara H; Andrews, Sean C; Kurosawa, Tadanori; Santos, Elton J G; Duong, Vincent; Fang, Lei; Ayzner, Alexander L; Bao, Zhenan

    2015-09-21

    In this work, we synthesize large-area thin films of a conjugated, imine-based, two-dimensional covalent organic framework at the solution/air interface. Thicknesses between ∼2-200 nm are achieved. Films can be transferred to any desired substrate by lifting from underneath, enabling their use as the semiconducting active layer in field-effect transistors.

  4. Anion-induced structural transformation of a sulfate-incorporated 2D Cd(II)–organic framework

    SciTech Connect

    Lee, Li-Wei; Luo, Tzuoo-Tsair; Wang, Chih-Min; Lee, Gene-Hsiang; Peng, Shie-Ming; Liu, Yen-Hsiang; Lee, Sheng-Long; Lu, Kuang-Lieh

    2016-07-15

    A Cd(II)–organic framework {[Cd_2(tpim)_4(SO_4)(H_2O)_2]·(SO_4)·21H_2O}{sub n} (1) was synthesized by reacting CdSO{sub 4}·8/3H{sub 2}O and 2,4,5-tri(4-pyridyl)imidazole (tpim) under hydrothermal conditions. A structural analysis showed that compound 1 adopts a layered structure in which the [Cd(tpim){sub 2}]{sub n} chains are linked by sulfate anions. These 2D layers are further packed into a 3D supramolecular framework via π–π interactions. The structure contains two types of SO{sub 4}{sup 2−} anions, i.e., bridging SO{sub 4}{sup 2−} and free SO{sub 4}{sup 2−} anions, the latter of which are included in the large channels of the framework. Compound 1 exhibits interesting anion exchange behavior. In the presence of SCN{sup −} anions, both the bridging and free SO{sub 4}{sup 2−} anions in 1 were completely exchanged by SCN{sup −} ligands to form a 1D species [Cd(tpim){sub 2}(SCN){sub 2}] (1A), in which the SCN{sup –} moieties function as a monodentate ligand. On the other hand, when compound 1 was ion exchanged with N{sub 3}{sup −} anions in aqueous solution, the bridging SO{sub 4}{sup 2−} moieties remained intact, and only the free guest SO{sub 4}{sup 2−} were replaced by N{sub 3}{sup −} anions. The gas adsorption behavior of the activated compound 1 was also investigated. - Highlights: • An interesting anion-induced structural transformation of a sulfate-incorporated 2D Cd(II)–organic framework is reported. • The sulfate-incorporated 2D layer compound exhibits very different anion exchange behavior with respect to SCN{sup −} and N{sub 3}{sup −}. • Both the bridging and free SO{sub 4}{sup 2−} anions in the 2D structure were completely exchanged by SCN{sup −} ligands, resulting in the formation of a 1D species. However, in the case of N{sub 3}{sup −} anions, only the free guest SO{sub 4}{sup 2−} in the structure was replaced.

  5. The Role of the Impedivity in the Magnetotelluric Response of 1D and 2D Structures

    NASA Astrophysics Data System (ADS)

    Esposito, Roberta; Giulia Di Giuseppe, Maria; Troiano, Antonio; Patella, Domenico; Mariano Castelo Branco, Raimundo

    2014-05-01

    The influence of the resistivity dispersion on the magnetotelluric (MT) response is analyzed. MT uses the natural electromagnetic (EM) field to determine the electrical resistivity of the subsoil and retrieve the geometry of lithospheric structures, revealing the presence of bodies as metallic deposits, hydrocarbons reservoirs, geothermal fluids. The frequency range of the EM field used varies from 10-4 to 104 Hz. If the soil is polarizable, the dispersion of the resistivity, whose characteristic frequency interval is between 10-2 and 102 Hz, may affect MT responses. Resistivity dispersion is a known phenomenology, which constitutes the basis of the Induced Polarization (IP) prospecting method. In the frequency domain (FD), the dispersion consists in a variation of the resistivity parameter as the frequency of the exciting current is changed. The dispersive resistivity, called impedivity, is a complex function of the frequency. At vanishing frequency, however, the impedivity is real and coincides with the classical resistivity parameter used in DC geoelectrical methods. A real asymptote is also approached as the frequency tends to infinity. The complex physical and chemical fluid-metal-rock interactions may produce induced polarization effects, which are related to the dispersion in rocks. This is manifested on the MT response, creating a distortion on the experimental curves. Disregarding the distortion effect may lead to misleading interpretation of the surveyed structures. We show the results from simulation of the MT responses, when dispersion is assumed to characterize the electrical properties of a region of the explored half-space. Initially, a 1D-layered earth is considered, with intermediate layer assumed to be dispersive. The influence of the dispersion amplitude on the shape of the MT responses is evaluated. The dispersion alters the shape of the curves in a way that, without any external constraints, may make the interpretation of the curves quite

  6. Unveiling Dimensionality Dependence of Glassy Dynamics: 2D Infinite Fluctuation Eclipses Inherent Structural Relaxation.

    PubMed

    Shiba, Hayato; Yamada, Yasunori; Kawasaki, Takeshi; Kim, Kang

    2016-12-09

    By using large-scale molecular dynamics simulations, the dynamics of two-dimensional (2D) supercooled liquids turns out to be dependent on the system size, while the size dependence is not pronounced in three-dimensional (3D) systems. It is demonstrated that the strong system-size effect in 2D amorphous systems originates from the enhanced fluctuations at long wavelengths which are similar to those of 2D crystal phonons. This observation is further supported by the frequency dependence of the vibrational density of states, consisting of the Debye approximation in the low-wave-number limit. However, the system-size effect in the intermediate scattering function becomes negligible when the length scale is larger than the vibrational amplitude. This suggests that the finite-size effect in a 2D system is transient and also that the structural relaxation itself is not fundamentally different from that in a 3D system. In fact, the dynamic correlation lengths estimated from the bond-breakage function, which do not suffer from those enhanced fluctuations, are not size dependent in either 2D or 3D systems.

  7. Unveiling Dimensionality Dependence of Glassy Dynamics: 2D Infinite Fluctuation Eclipses Inherent Structural Relaxation

    NASA Astrophysics Data System (ADS)

    Shiba, Hayato; Yamada, Yasunori; Kawasaki, Takeshi; Kim, Kang

    2016-12-01

    By using large-scale molecular dynamics simulations, the dynamics of two-dimensional (2D) supercooled liquids turns out to be dependent on the system size, while the size dependence is not pronounced in three-dimensional (3D) systems. It is demonstrated that the strong system-size effect in 2D amorphous systems originates from the enhanced fluctuations at long wavelengths which are similar to those of 2D crystal phonons. This observation is further supported by the frequency dependence of the vibrational density of states, consisting of the Debye approximation in the low-wave-number limit. However, the system-size effect in the intermediate scattering function becomes negligible when the length scale is larger than the vibrational amplitude. This suggests that the finite-size effect in a 2D system is transient and also that the structural relaxation itself is not fundamentally different from that in a 3D system. In fact, the dynamic correlation lengths estimated from the bond-breakage function, which do not suffer from those enhanced fluctuations, are not size dependent in either 2D or 3D systems.

  8. Multiple triangulation analysis: application to determine the velocity of 2-D structures

    NASA Astrophysics Data System (ADS)

    Zhou, X.-Z.; Zong, Q.-G.; Wang, J.; Pu, Z. Y.; Zhang, X. G.; Shi, Q. Q.; Cao, J. B.

    2006-11-01

    In order to avoid the ambiguity of the application of the Triangulation Method (multi-spacecraft timing method) to two-dimensional structures, another version of this method, the Multiple Triangulation Analysis (MTA) is used, to calculate the velocities of these structures based on 4-point measurements. We describe the principle of MTA and apply this approach to a real event observed by the Cluster constellation on 2 October 2003. The resulting velocity of the 2-D structure agrees with the ones obtained by some other methods fairly well. So we believe that MTA is a reliable version of the Triangulation Method for 2-D structures, and thus provides us a new way to describe their motion.

  9. Low band gap frequencies and multiplexing properties in 1D and 2D mass spring structures

    NASA Astrophysics Data System (ADS)

    Aly, Arafa H.; Mehaney, Ahmed

    2016-11-01

    This study reports on the propagation of elastic waves in 1D and 2D mass spring structures. An analytical and computation model is presented for the 1D and 2D mass spring systems with different examples. An enhancement in the band gap values was obtained by modeling the structures to obtain low frequency band gaps at small dimensions. Additionally, the evolution of the band gap as a function of mass value is discussed. Special attention is devoted to the local resonance property in frequency ranges within the gaps in the band structure for the corresponding infinite periodic lattice in the 1D and 2D mass spring system. A linear defect formed of a row of specific masses produces an elastic waveguide that transmits at the narrow pass band frequency. The frequency of the waveguides can be selected by adjusting the mass and stiffness coefficients of the materials constituting the waveguide. Moreover, we pay more attention to analyze the wave multiplexer and DE-multiplexer in the 2D mass spring system. We show that two of these tunable waveguides with alternating materials can be employed to filter and separate specific frequencies from a broad band input signal. The presented simulation data is validated through comparison with the published research, and can be extended in the development of resonators and MEMS verification.

  10. Band engineering in a van der Waals heterostructure using a 2D polar material and a capping layer

    PubMed Central

    Cho, Sung Beom; Chung, Yong-Chae

    2016-01-01

    Van der Waals (vdW) heterostructures are expected to play a key role in next-generation electronic and optoelectronic devices. In this study, the band alignment of a vdW heterostructure with 2D polar materials was studied using first-principles calculations. As a model case study, single-sided fluorographene (a 2D polar material) on insulating (h-BN) and metallic (graphite) substrates was investigated to understand the band alignment behavior of polar materials. Single-sided fluorographene was found to have a potential difference along the out-of-plane direction. This potential difference provided as built-in potential at the interface, which shift the band alignment between h-BN and graphite. The interface characteristics were highly dependent on the interface terminations because of this built-in potential. Interestingly, this band alignment can be modified with a capping layer of graphene or BN because the capping layer triggered electronic reconstruction near the interface. This is because the bonding nature is not covalent, but van der Waals, which made it possible to avoid Fermi-level pinning at the interface. The results of this study showed that diverse types of band alignment can be achieved using polar materials and an appropriate capping layer. PMID:27301777

  11. Bioelectronic interfaces by spontaneously organized peptides on 2D atomic single layer materials

    NASA Astrophysics Data System (ADS)

    Hayamizu, Yuhei; So, Christopher R.; Dag, Sefa; Page, Tamon S.; Starkebaum, David; Sarikaya, Mehmet

    2016-09-01

    Self-assembly of biological molecules on solid materials is central to the “bottom-up” approach to directly integrate biology with electronics. Inspired by biology, exquisite biomolecular nanoarchitectures have been formed on solid surfaces. We demonstrate that a combinatorially-selected dodecapeptide and its variants self-assemble into peptide nanowires on two-dimensional nanosheets, single-layer graphene and MoS2. The abrupt boundaries of nanowires create electronic junctions via spatial biomolecular doping of graphene and manifest themselves as a self-assembled electronic network. Furthermore, designed peptides form nanowires on single-layer MoS2 modifying both its electric conductivity and photoluminescence. The biomolecular doping of nanosheets defined by peptide nanostructures may represent the crucial first step in integrating biology with nano-electronics towards realizing fully self-assembled bionanoelectronic devices.

  12. Bioelectronic interfaces by spontaneously organized peptides on 2D atomic single layer materials.

    PubMed

    Hayamizu, Yuhei; So, Christopher R; Dag, Sefa; Page, Tamon S; Starkebaum, David; Sarikaya, Mehmet

    2016-09-22

    Self-assembly of biological molecules on solid materials is central to the "bottom-up" approach to directly integrate biology with electronics. Inspired by biology, exquisite biomolecular nanoarchitectures have been formed on solid surfaces. We demonstrate that a combinatorially-selected dodecapeptide and its variants self-assemble into peptide nanowires on two-dimensional nanosheets, single-layer graphene and MoS2. The abrupt boundaries of nanowires create electronic junctions via spatial biomolecular doping of graphene and manifest themselves as a self-assembled electronic network. Furthermore, designed peptides form nanowires on single-layer MoS2 modifying both its electric conductivity and photoluminescence. The biomolecular doping of nanosheets defined by peptide nanostructures may represent the crucial first step in integrating biology with nano-electronics towards realizing fully self-assembled bionanoelectronic devices.

  13. Bioelectronic interfaces by spontaneously organized peptides on 2D atomic single layer materials

    PubMed Central

    Hayamizu, Yuhei; So, Christopher R.; Dag, Sefa; Page, Tamon S.; Starkebaum, David; Sarikaya, Mehmet

    2016-01-01

    Self-assembly of biological molecules on solid materials is central to the “bottom-up” approach to directly integrate biology with electronics. Inspired by biology, exquisite biomolecular nanoarchitectures have been formed on solid surfaces. We demonstrate that a combinatorially-selected dodecapeptide and its variants self-assemble into peptide nanowires on two-dimensional nanosheets, single-layer graphene and MoS2. The abrupt boundaries of nanowires create electronic junctions via spatial biomolecular doping of graphene and manifest themselves as a self-assembled electronic network. Furthermore, designed peptides form nanowires on single-layer MoS2 modifying both its electric conductivity and photoluminescence. The biomolecular doping of nanosheets defined by peptide nanostructures may represent the crucial first step in integrating biology with nano-electronics towards realizing fully self-assembled bionanoelectronic devices. PMID:27653460

  14. Discrete hexamer water clusters and 2D water layer trapped in three luminescent Ag/tetramethylpyrazine/benzene-dicarboxylate hosts: 1D chain, 2D layer and 3D network

    NASA Astrophysics Data System (ADS)

    Mei, Hong-Xin; Zhang, Ting; Huang, Hua-Qi; Huang, Rong-Bin; Zheng, Lan-Sun

    2016-03-01

    Three mix-ligand Ag(I) coordination compounds, namely, {[Ag10(tpyz) 5(L1) 5(H2 O)2].(H2 O)4}n (1, tpyz = 2,3,4,5-tetramethylpyrazine, H2 L1 = phthalic acid), [Ag4(tpyz) 2(L2) 2(H2 O)].(H2 O)5}n (2, H2 L2 = isophthalic acid) {[Ag2(tpyz) 2(L3) (H2 O)4].(H2 O)8}n (3, H2 L3 = terephthalic acid), have been synthesized and characterized by elemental analysis, IR, PXRD and X-ray single-crystal diffraction. 1 exhibits a 2D layer which can be simplified as a (4,4) net. 2 is a 3D network which can be simplified as a (3,3)-connected 2-nodal net with a point symbol of {102.12}{102}. 3 consists of linear [Ag(tpyz) (H2 O)2]n chain. Of particular interest, discrete hexamer water clusters were observed in 1 and 2, while a 2D L10(6) water layer exists in 3. The results suggest that the benzene dicarboxylates play pivotal roles in the formation of the different host architectures as well as different water aggregations. Moreover, thermogravimetric analysis (TGA) and emissive behaviors of these compounds were investigated.

  15. 2D and 3D GPR imaging of structural ceilings in historic and existing constructions

    NASA Astrophysics Data System (ADS)

    Colla, Camilla

    2014-05-01

    GPR applications in civil engineering are to date quite diversified. With respect to civil constructions and monumental buildings, detection of voids, cavities, layering in structural elements, variation of geometry, of moisture content, of materials, areas of decay, defects, cracks have been reported in timber, concrete and masonry elements. Nonetheless, many more fields of investigation remain unexplored. This contribution gives an account of a variety of examples of structural ceilings investigation by GPR radar in reflection mode, either as 2D or 3D data acquisition and visualisation. Ceilings have a pre-eminent role in buildings as they contribute to a good structural behaviour of the construction. Primarily, the following functions can be listed for ceilings: a) they carry vertical dead and live loads on floors and distribute such loads to the vertical walls; b) they oppose to external horizontal forces such as wind loads and earthquakes helping to transfer such forces from the loaded element to the other walls; c) they contribute to create the box skeleton and behaviour of a building, connecting the different load bearing walls and reducing the slenderness and flexural instability of such walls. Therefore, knowing how ceilings are made in specific buildings is of paramount importance for architects and structural engineers. According to the type of building and age of construction, ceilings may present very different solutions and materials. Moreover, in existing constructions, ceilings may have been substituted, modified or strengthened due to material decay or to change of use of the building. These alterations may often go unrecorded in technical documentation or technical drawings may be unavailable. In many cases, the position, orientation and number of the load carrying elements in ceilings may be hidden or not be in sight, due for example to the presence of false ceilings or to technical plants. GPR radar can constitute a very useful tool for

  16. Energy-filtered Electron Transport Structures for Low-power Low-noise 2-D Electronics

    PubMed Central

    Pan, Xuan; Qiu, Wanzhi; Skafidas, Efstratios

    2016-01-01

    In addition to cryogenic techniques, energy filtering has the potential to achieve high-performance low-noise 2-D electronic systems. Assemblies based on graphene quantum dots (GQDs) have been demonstrated to exhibit interesting transport properties, including resonant tunnelling. In this paper, we investigate GQDs based structures with the goal of producing energy filters for next generation lower-power lower-noise 2-D electronic systems. We evaluate the electron transport properties of the proposed GQD device structures to demonstrate electron energy filtering and the ability to control the position and magnitude of the energy passband by appropriate device dimensioning. We also show that the signal-to-thermal noise ratio performance of the proposed nanoscale device can be modified according to device geometry. The tunability of two-dimensional GQD structures indicates a promising route for the design of electron energy filters to produce low-power and low-noise electronics. PMID:27796343

  17. Energy-filtered Electron Transport Structures for Low-power Low-noise 2-D Electronics.

    PubMed

    Pan, Xuan; Qiu, Wanzhi; Skafidas, Efstratios

    2016-10-31

    In addition to cryogenic techniques, energy filtering has the potential to achieve high-performance low-noise 2-D electronic systems. Assemblies based on graphene quantum dots (GQDs) have been demonstrated to exhibit interesting transport properties, including resonant tunnelling. In this paper, we investigate GQDs based structures with the goal of producing energy filters for next generation lower-power lower-noise 2-D electronic systems. We evaluate the electron transport properties of the proposed GQD device structures to demonstrate electron energy filtering and the ability to control the position and magnitude of the energy passband by appropriate device dimensioning. We also show that the signal-to-thermal noise ratio performance of the proposed nanoscale device can be modified according to device geometry. The tunability of two-dimensional GQD structures indicates a promising route for the design of electron energy filters to produce low-power and low-noise electronics.

  18. Energy-filtered Electron Transport Structures for Low-power Low-noise 2-D Electronics

    NASA Astrophysics Data System (ADS)

    Pan, Xuan; Qiu, Wanzhi; Skafidas, Efstratios

    2016-10-01

    In addition to cryogenic techniques, energy filtering has the potential to achieve high-performance low-noise 2-D electronic systems. Assemblies based on graphene quantum dots (GQDs) have been demonstrated to exhibit interesting transport properties, including resonant tunnelling. In this paper, we investigate GQDs based structures with the goal of producing energy filters for next generation lower-power lower-noise 2-D electronic systems. We evaluate the electron transport properties of the proposed GQD device structures to demonstrate electron energy filtering and the ability to control the position and magnitude of the energy passband by appropriate device dimensioning. We also show that the signal-to-thermal noise ratio performance of the proposed nanoscale device can be modified according to device geometry. The tunability of two-dimensional GQD structures indicates a promising route for the design of electron energy filters to produce low-power and low-noise electronics.

  19. Fabrication of 2D and 3D photonic structures using laser lithography

    NASA Astrophysics Data System (ADS)

    Gaso, P.; Jandura, D.; Pudis, D.

    2016-12-01

    In this paper we demonstrate possibilities of three-dimensional (3D) printing technology based on two photon polymerization. We used three-dimensional dip-in direct-laser-writing (DLW) optical lithography to fabricate 2D and 3D optical structures for optoelectronics and for optical sensing applications. DLW lithography allows us use a non conventional way how to couple light into the waveguide structure. We prepared ring resonator and we investigated its transmission spectral characteristic. We present 3D inverse opal structure from its design to printing and scanning electron microscope (SEM) imaging. Finally, SEM images of some prepared photonic crystal structures were performed.

  20. Amide I'-II' 2D IR spectroscopy provides enhanced protein secondary structural sensitivity.

    PubMed

    Deflores, Lauren P; Ganim, Ziad; Nicodemus, Rebecca A; Tokmakoff, Andrei

    2009-03-11

    We demonstrate how multimode 2D IR spectroscopy of the protein amide I' and II' vibrations can be used to distinguish protein secondary structure. Polarization-dependent amide I'-II' 2D IR experiments on poly-l-lysine in the beta-sheet, alpha-helix, and random coil conformations show that a combination of amide I' and II' diagonal and cross peaks can effectively distinguish between secondary structural content, where amide I' infrared spectroscopy alone cannot. The enhanced sensitivity arises from frequency and amplitude correlations between amide II' and amide I' spectra that reflect the symmetry of secondary structures. 2D IR surfaces are used to parametrize an excitonic model for the amide I'-II' manifold suitable to predict protein amide I'-II' spectra. This model reveals that the dominant vibrational interaction contributing to this sensitivity is a combination of negative amide II'-II' through-bond coupling and amide I'-II' coupling within the peptide unit. The empirically determined amide II'-II' couplings do not significantly vary with secondary structure: -8.5 cm(-1) for the beta sheet, -8.7 cm(-1) for the alpha helix, and -5 cm(-1) for the coil.

  1. A Deformed Shape Monitoring Model for Building Structures Based on a 2D Laser Scanner

    PubMed Central

    Choi, Se Woon; Kim, Bub Ryur; Lee, Hong Min; Kim, Yousok; Park, Hyo Seon

    2013-01-01

    High-rise buildings subjected to lateral loads such as wind and earthquake loads must be checked not to exceed the limits on the maximum lateral displacement or the maximum inter-story drift ratios. In this paper, a sensing model for deformed shapes of a building structure in motion is presented. The deformed shape sensing model based on a 2D scanner consists of five modules: (1) module for acquiring coordinate information of a point in a building; (2) module for coordinate transformation and data arrangement for generation of time history of the point; (3) module for smoothing by adjacent averaging technique; (4) module for generation of the displacement history for each story and deformed shape of a building, and (5) module for evaluation of the serviceability of a building. The feasibility of the sensing model based on a 2D laser scanner is tested through free vibration tests of a three-story steel frame structure with a relatively high slenderness ratio of 5.0. Free vibration responses measured from both laser displacement sensors and a 2D laser scanner are compared. In the experimentation, the deformed shapes were obtained from three different methods: the model based on the 2D laser scanner, the direct measurement based on laser displacement sensors, and the numerical method using acceleration data and the displacements from GPS. As a result, it is confirmed that the deformed shape measurement model based on a 2D laser scanner can be a promising alternative for high-rise buildings where installation of laser displacement sensors is impossible. PMID:23698269

  2. Lipid-gramicidin interactions: dynamic structure of the boundary lipid by 2D-ELDOR.

    PubMed

    Costa-Filho, Antonio J; Crepeau, Richard H; Borbat, Petr P; Ge, Mingtao; Freed, Jack H

    2003-05-01

    The use of 2D-electron-electron double resonance (2D-ELDOR) for the characterization of the boundary lipid in membrane vesicles of DPPC and gramicidin A' (GA) is reported. We show that 2D-ELDOR, with its enhanced spectral resolution to dynamic structure as compared with continuous-wave electron spin resonance, provides a reliable and useful way of studying lipid-protein interactions. The 2D-ELDOR spectra of the end-chain spin label 16-PC in DPPC/GA vesicles is composed of two components, which are assigned to the bulk lipids (with sharp auto peaks and crosspeaks) and to the boundary lipids (with broad auto peaks). Their distinction is clearest for higher temperatures and higher GA concentrations. The quantitative analysis of these spectra shows relatively faster motions and very low ordering for the end chain of the bulk lipids, whereas the boundary lipids show very high "y-ordering" and slower motions. The y-ordering represents a dynamic bending at the end of the boundary lipid acyl chain, which can then coat the GA molecules. These results are consistent with the previous studies by Ge and Freed (1999) using continuous-wave electron spin resonance, thereby supporting their model for GA aggregation and H(II) phase formation for high GA concentrations. Improved instrumental and simulation methods have been employed.

  3. High-efficiency exfoliation of layered materials into 2D nanosheets in switchable CO2/Surfactant/H2O system

    PubMed Central

    Wang, Nan; Xu, Qun; Xu, Shanshan; Qi, Yuhang; Chen, Meng; Li, Hongxiang; Han, Buxing

    2015-01-01

    Layered materials present attractive and important properties due to their two-dimensional (2D) structure, allowing potential applications including electronics, optoelectronics, and catalysis. However, fully exploiting the outstanding properties will require a method for their efficient exfoliation. Here we present that a series of layered materials can be successfully exfoliated into single- and few-layer nanosheets using the driving forces coming from the phase inversion, i.e., from micelles to reverse micelles in the emulsion microenvironment built by supercritical carbon dioxide (SC CO2). The effect of variable experimental parameters including CO2 pressure, ethanol/water ratio, and initial concentration of bulk materials on the exfoliation yield have been investigated. Moreover, we demonstrate that the exfoliated 2D nanosheets have their worthwhile applications, for example, graphene can be used to prepare conductive paper, MoS2 can be used as fluorescent label to perform cellular labelling, and BN can effectively reinforce polymers leading to the promising mechanical properties. PMID:26568039

  4. Hydrogen-bond-assisted "gold cold fusion" for fabrication of 2D web structures.

    PubMed

    Mandal, Saikat; Shundo, Atsuomi; Acharya, Somobrata; Hill, Jonathan P; Ji, Qingmin; Ariga, Katsuhiko

    2009-07-06

    Keeping their cool: Fabrication of a 2D weblike nanonetwork of gold was successfully demonstrated through a two-step procedure including complexation of gold precursors to a weblike supramolecular assembly of surfactant followed by in situ reduction of the precursors to gold. Molecular assemblies stabilized by hydrogen bonding provided a sound template, leading to the highly integrated structure of gold through room-temperature (cold) nanostructure fusion.

  5. Well-defined azazirconacyclopropane complexes supported on silica structurally determined by 2D NMR comparative elucidation.

    PubMed

    El Eter, Mohamad; Hamzaoui, Bilel; Abou-Hamad, Edy; Pelletier, Jérémie D A; Basset, Jean-Marie

    2013-05-21

    Grafting of Zr(NMe2)4 on mesoporous silica SBA-15 afforded selectively well-defined surface species [triple bond, length as m-dash]SiOZr(NMe2)(η2NMeCH2). 2D solid-state NMR ((1)H-(13)C HETCOR, Multiple Quantum) experiments have shown a unique structural rearrangement occurring on the immobilised zirconium bis methylamido ligand.

  6. Three 2D Ag(I)-framework isomers with helical structures controlled by the chirality of camphor-10-sulfonic acid.

    PubMed

    Guo, Peng

    2011-02-28

    Three 2D Ag(I)-framework isomers were constructed from enantiopure camphor-10-sulfonic acids or racemic camphor-10-sulfonic acids, together with achiral 4-aminobenzoic acids. In complex 1, (+)-camphor-10-sulfonic acids bridge the single left-handed helices that are made up of Ag ions and 4-aminobenzoic acids, generating a homochiral 2D layer. In such a structure, the interweaving of triple left-handed homohelices was also found. It is worth noting that the helicity of complex 2 could be controlled by the handedness of the camphor-10-sulfonic acid. In complex 2, there are right-handed helical structures, including single right-handed and triple right-handed helical structures connected by (-)-camphor-10-sulfonic acids. For a comparative study, (±)-camphor-10-sulfonic acids were utilized to synthesize complex 3, in which equal numbers of right-handed or left-handed double-helical chains are created. All the complexes were characterized by single-crystal X-ray structure determination, powder X-ray diffraction, IR, TGA and element analysis. Circular dichroism spectra of complexes 1 and 2 were been studied to confirm the fact that enantiopure bridging ligands do not racemize.

  7. Constructing 2D porous graphitic C3 N4 nanosheets/nitrogen-doped graphene/layered MoS2 ternary nanojunction with enhanced photoelectrochemical activity.

    PubMed

    Hou, Yang; Wen, Zhenhai; Cui, Shumao; Guo, Xiaoru; Chen, Junhong

    2013-11-20

    A 2D porous graphitic C3 N4 nanosheets/nitrogen-doped graphene/layered MoS2 ternary nanojunction is synthesized using a simple pyrolysis process followed by a hydrothermal treatment. The 2D ternary nanojunction exhibits significantly enhanced photoelectrochemical and photocatalytic activities due to the large contact area, efficient light absorption, and rapid charge separation and transport.

  8. Improved structural quality of AlN grown on sapphire by 3D/2D alternation growth

    NASA Astrophysics Data System (ADS)

    Guo, Yanmin; Fang, Yulong; Yin, Jiayun; Zhang, Zhirong; Wang, Bo; Li, Jia; Lu, Weili; Feng, Zhihong

    2017-04-01

    Three dimensional (3D) and two dimensional (2D) alternation growth was used to grow AlN epitaxial layers on sapphire substrates. AlN samples grown using this technique have higher crystalline quality and lower dislocation density than samples grown using only 3D or 2D growth modes as witnessed by the high-resolution X-ray diffraction. Smooth atomic terraces with root mean square roughness of 0.107 nm were observed using atomic force microscopy (AFM) when the 3D and 2D AlN were 75 nm and 425 nm, respectively. This sample possesses single crystallographic orientation along the c-axis identified by Raman spectroscopy. Furthermore, the 3D/2D alternating growth mode modulates internal stress in AlN epitaxial layer by adjusting 2D AlN thickness, and the mechanism was studied in detail.

  9. Locally adaptive 2D-3D registration using vascular structure model for liver catheterization.

    PubMed

    Kim, Jihye; Lee, Jeongjin; Chung, Jin Wook; Shin, Yeong-Gil

    2016-03-01

    Two-dimensional-three-dimensional (2D-3D) registration between intra-operative 2D digital subtraction angiography (DSA) and pre-operative 3D computed tomography angiography (CTA) can be used for roadmapping purposes. However, through the projection of 3D vessels, incorrect intersections and overlaps between vessels are produced because of the complex vascular structure, which makes it difficult to obtain the correct solution of 2D-3D registration. To overcome these problems, we propose a registration method that selects a suitable part of a 3D vascular structure for a given DSA image and finds the optimized solution to the partial 3D structure. The proposed algorithm can reduce the registration errors because it restricts the range of the 3D vascular structure for the registration by using only the relevant 3D vessels with the given DSA. To search for the appropriate 3D partial structure, we first construct a tree model of the 3D vascular structure and divide it into several subtrees in accordance with the connectivity. Then, the best matched subtree with the given DSA image is selected using the results from the coarse registration between each subtree and the vessels in the DSA image. Finally, a fine registration is conducted to minimize the difference between the selected subtree and the vessels of the DSA image. In experimental results obtained using 10 clinical datasets, the average distance errors in the case of the proposed method were 2.34±1.94mm. The proposed algorithm converges faster and produces more correct results than the conventional method in evaluations on patient datasets.

  10. Ab Initio Based 2D Continuum Mechanics - Sensitivity Prediction for Contact Resonance Atomic Force Microscopy Based Structure Fingerprints

    NASA Astrophysics Data System (ADS)

    Tu, Qing; Lange, Björn; Lopes, J. Marcelo J.; Zauscher, Stefan; Blum, Volker

    Contact resonance AFM is demonstrated as a powerful tool for mapping differences in the mechanical properties of 2D materials and heterostructures, permitting to resolve surface and subsurface structural differences of different domains. Measured contact resonance frequencies are related to the contact stiffness of the combined tip-sample system. Based on first principles predicted elastic properties and a continuum approach to model the mechanical impedance, we find contact stiffness ratios between different domains of few-layer graphene on 3C-SiC(111) in excellent agreement with experiment. We next demonstrate that the approach is able to quantitatively resolve differences between other 2D materials domains, e.g., for h-BN, MoS2 and MoO3 on graphene on SiC. We show that the combined effect of several materials parameters, especially the in-plane elastic properties and the layer thickness, determines the contact stiffness, therefore boosting the sensitivity even if the out-of-plane elastic properties are similar.

  11. 1d, 2d, and 3d periodic structures: Electromagnetic characterization, design, and measurement

    NASA Astrophysics Data System (ADS)

    Brockett, Timothy John

    Periodic structures have many useful applications in electromagnetics including phased arrays, frequency selective surfaces, and absorbing interfaces. Their unique properties can be used to provide increased performance in antenna gain, electromagnetic propagation, and electromagnetic absorption. In antenna arrays, repeating elements create a larger eective aperture, increasing the gain of the antenna and the ability to scan the direction of the main beam. Three-dimensional periodic structures, such as an array of shaped pillars such as columns, cones, or prisms have the potential of improving electromagnetic absorption, improving performance in applications such as solar cell eciency and absorbing interfaces. Furthermore, research into periodic structures is a continuing endeavor where novel approaches and analysis in appropriate applications can be sought. This dissertation will address the analysis, diagnostics, and enhancement of 1D, 2D, and 3D periodic structures for antenna array applications and solar cell technology. In particular, a unique approach to array design will be introduced to prevent the appearance of undesirable grating lobes in large antenna arrays that employ subarrays. This approach, named the distortion diagnostic procedure, can apply directly to 1D and 2D periodic structures in the form of planar antenna arrays. Interesting corollaries included here are developments in millimeter-wave antenna measurements including spiral planar scanning, phaseless measurements, and addressing antennas that feature an internal source. Finally, analysis and enhancement of 3D periodic structures in nanostructure photovoltaic arrays and absorbing interfaces will be examined for their behavior and basic operation in regards to improved absorption of electromagnetic waves.

  12. Bonding-restricted structure search for novel 2D materials with dispersed C2 dimers

    NASA Astrophysics Data System (ADS)

    Zhang, Cunzhi; Zhang, Shunhong; Wang, Qian

    2016-07-01

    Currently, the available algorithms for unbiased structure searches are primarily atom-based, where atoms are manipulated as the elementary units, and energy is used as the target function without any restrictions on the bonding of atoms. In fact, in many cases such as nanostructure-assembled materials, the structural units are nanoclusters. We report a study of a bonding-restricted structure search method based on the particle swarm optimization (PSO) for finding the stable structures of two-dimensional (2D) materials containing dispersed C2 dimers rather than individual C atoms. The C2 dimer can be considered as a prototype of nanoclusters. Taking Si-C, B-C and Ti-C systems as test cases, our method combined with density functional theory and phonon calculations uncover new ground state geometrical structures for SiC2, Si2C2, BC2, B2C2, TiC2, and Ti2C2 sheets and their low-lying energy allotropes, as well as their electronic structures. Equally important, this method can be applied to other complex systems even containing f elements and other molecular dimers such as S2, N2, B2 and Si2, where the complex orbital orientations require extensive search for finding the optimal orientations to maximize the bonding with the dimers, predicting new 2D materials beyond MXenes (a family of transition metal carbides or nitrides) and dichalcogenide monolayers.

  13. Bonding-restricted structure search for novel 2D materials with dispersed C2 dimers.

    PubMed

    Zhang, Cunzhi; Zhang, Shunhong; Wang, Qian

    2016-07-12

    Currently, the available algorithms for unbiased structure searches are primarily atom-based, where atoms are manipulated as the elementary units, and energy is used as the target function without any restrictions on the bonding of atoms. In fact, in many cases such as nanostructure-assembled materials, the structural units are nanoclusters. We report a study of a bonding-restricted structure search method based on the particle swarm optimization (PSO) for finding the stable structures of two-dimensional (2D) materials containing dispersed C2 dimers rather than individual C atoms. The C2 dimer can be considered as a prototype of nanoclusters. Taking Si-C, B-C and Ti-C systems as test cases, our method combined with density functional theory and phonon calculations uncover new ground state geometrical structures for SiC2, Si2C2, BC2, B2C2, TiC2, and Ti2C2 sheets and their low-lying energy allotropes, as well as their electronic structures. Equally important, this method can be applied to other complex systems even containing f elements and other molecular dimers such as S2, N2, B2 and Si2, where the complex orbital orientations require extensive search for finding the optimal orientations to maximize the bonding with the dimers, predicting new 2D materials beyond MXenes (a family of transition metal carbides or nitrides) and dichalcogenide monolayers.

  14. Bonding-restricted structure search for novel 2D materials with dispersed C2 dimers

    PubMed Central

    Zhang, Cunzhi; Zhang, Shunhong; Wang, Qian

    2016-01-01

    Currently, the available algorithms for unbiased structure searches are primarily atom-based, where atoms are manipulated as the elementary units, and energy is used as the target function without any restrictions on the bonding of atoms. In fact, in many cases such as nanostructure-assembled materials, the structural units are nanoclusters. We report a study of a bonding-restricted structure search method based on the particle swarm optimization (PSO) for finding the stable structures of two-dimensional (2D) materials containing dispersed C2 dimers rather than individual C atoms. The C2 dimer can be considered as a prototype of nanoclusters. Taking Si-C, B-C and Ti-C systems as test cases, our method combined with density functional theory and phonon calculations uncover new ground state geometrical structures for SiC2, Si2C2, BC2, B2C2, TiC2, and Ti2C2 sheets and their low-lying energy allotropes, as well as their electronic structures. Equally important, this method can be applied to other complex systems even containing f elements and other molecular dimers such as S2, N2, B2 and Si2, where the complex orbital orientations require extensive search for finding the optimal orientations to maximize the bonding with the dimers, predicting new 2D materials beyond MXenes (a family of transition metal carbides or nitrides) and dichalcogenide monolayers. PMID:27403589

  15. 2D-CELL: image processing software for extraction and analysis of 2-dimensional cellular structures

    NASA Astrophysics Data System (ADS)

    Righetti, F.; Telley, H.; Leibling, Th. M.; Mocellin, A.

    1992-01-01

    2D-CELL is a software package for the processing and analyzing of photographic images of cellular structures in a largely interactive way. Starting from a binary digitized image, the programs extract the line network (skeleton) of the structure and determine the graph representation that best models it. Provision is made for manually correcting defects such as incorrect node positions or dangling bonds. Then a suitable algorithm retrieves polygonal contours which define individual cells — local boundary curvatures are neglected for simplicity. Using elementary analytical geometry relations, a range of metric and topological parameters describing the population are then computed, organized into statistical distributions and graphically displayed.

  16. Detection and assessment of damage in 2D structures using measured modal response

    NASA Astrophysics Data System (ADS)

    Banan, Mohammad Reza; Mehdi-pour, Yousef

    2007-10-01

    Motivated by one of the concepts in the field of health monitoring for structural systems, a damage detection procedure is developed. In order to perform the system health monitoring, structural health along with sensor and actuator malfunction must be continuously checked. As a step toward developing a system health-monitoring scheme, this paper investigated structural damage detection, using a constrained eigenstructure assignment. The proposed damage detection method is constructed based on a concept of control theory and subspace rotation for two-dimensional (2D)-structural systems. To demonstrate the capabilities of the developed damage detection algorithm, the behavior of a simulated degraded braced-frame structure is studied. Using Monte Carlo simulation, the performance of the approach is evaluated. It shows that the proposed algorithm is potentially promising for application to real cases.

  17. Robust 2D principal component analysis: a structured sparsity regularized approach.

    PubMed

    Yipeng Sun; Xiaoming Tao; Yang Li; Jianhua Lu

    2015-08-01

    Principal component analysis (PCA) is widely used to extract features and reduce dimensionality in various computer vision and image/video processing tasks. Conventional approaches either lack robustness to outliers and corrupted data or are designed for one-dimensional signals. To address this problem, we propose a robust PCA model for two-dimensional images incorporating structured sparse priors, referred to as structured sparse 2D-PCA. This robust model considers the prior of structured and grouped pixel values in two dimensions. As the proposed formulation is jointly nonconvex and nonsmooth, which is difficult to tackle by joint optimization, we develop a two-stage alternating minimization approach to solve the problem. This approach iteratively learns the projection matrices by bidirectional decomposition and utilizes the proximal method to obtain the structured sparse outliers. By considering the structured sparsity prior, the proposed model becomes less sensitive to noisy data and outliers in two dimensions. Moreover, the computational cost indicates that the robust two-dimensional model is capable of processing quarter common intermediate format video in real time, as well as handling large-size images and videos, which is often intractable with other robust PCA approaches that involve image-to-vector conversion. Experimental results on robust face reconstruction, video background subtraction data set, and real-world videos show the effectiveness of the proposed model compared with conventional 2D-PCA and other robust PCA algorithms.

  18. Two 2D Cd(II) coordination polymers based on asymmetrical Schiff-base ligand: synthesis, crystal structures and luminescent properties.

    PubMed

    Dang, Dong-Bin; Li, Meng-Meng; Bai, Yan; Zhou, Rui-Min

    2013-02-15

    Two new two-dimensional coordination polymers [Cd(3)L(2)(SCN)(6)](n) (1) and [CdLI(2)](n) (2) have been synthesized and characterized by IR spectroscopy, elemental analysis, TG technique, XRPD and complete single crystal structure analysis, where L is 4-(pyridine-2-yl)methyleneamino-1,2,4-trizaole. Asymmetrical Schiff-base ligand L with five- and six-membered N-containing heterocyclic rings acts as a tridentate bridging ligand to bind two Cd(II) centers through one terminal N(triazolyl) and one pyridylimine chelate unit in 1 and 2. For polymer 1, tridentate bridging ligands link Cd-(1,3-μ-SCN(-)) 1D inorganic chains to form a 2D layer network. The existence of C-H···π and π-π stacking interactions between 2D hybrid layers further gives rise to a 3D supramolecular network. In comparison with 1, polymer 2 shows a 2D layer network containing hexanuclear macrometallacyclic units. The 2D layers are staggered together through the combination of C-H···π and π-π stacking interactions and forming a 3D supramolecular structure. The luminescent properties of the polymers 1 and 2 were investigated in the solid state at room temperature.

  19. Structure analysis of layer-by-layer multilayer films of colloidal particles

    NASA Astrophysics Data System (ADS)

    Batys, Piotr; Nosek, Magdalena; Weroński, Paweł

    2015-03-01

    We have mimicked the layer-by-layer self-assembling process of monodisperse colloidal particles at a solid-liquid interface using the extended random sequential adsorption model of hard spheres. We have studied five multilayer structures of similar thickness, each created at a different single-layer surface coverage. For each multilayer, we have determined its particle volume fraction as a function of distance from the interface. Additionally, we have characterized the film structure in terms of 2D and 3D pair-correlation functions. We have found that the coverage of about 0.3 is optimal for producing a uniform, constant-porosity multilayer in a minimum number of adsorption cycles. The single-layer coverage has also a significant effect on the primary maximum of 2D radial distribution function. In the case of multilayer with the coverage lower than 0.30 the 2D pair-correlation functions of even layers exhibit maxima decreasing with the increase in the layer number. We have verified our theoretical predictions experimentally. We have used fluorescence microscopy to determine the 2D pair-correlation functions for the second, third, and fourth layers of multilayer formed of micron-sized spherical latex particles. We have found a good agreement between our theoretical and experimental results, which confirms the validity of the extended RSA model.

  20. Two-Dimensional Layered Oxide Structures Tailored by Self-Assembled Layer Stacking via Interfacial Strain

    DOE PAGES

    Zhang, Wenrui; Li, Mingtao; Chen, Aiping; ...

    2016-06-13

    Two-dimensional (2D) nanostructures emerge as one of leading topics in fundamental materials science and could enable next generation nanoelectronic devices. Beyond graphene and molybdenum disulphide, layered complex oxides are another large group of promising 2D candidates because of their strong interplay of intrinsic charge, spin, orbital and lattice. As a fundamental basis of heteroepitaxial thin film growth, interfacial strain can be used to design materials exhibiting new phenomena beyond their conventional form. Here we report the strain-driven self-assembly of Bismuth-based supercells (SC) with a 2D layered structure, and elucidate the fundamental growth mechanism with combined experimental tools and first-principles calculations.more » The study revealed that the new layered structures were formed by the strain-enabled self-assembled atomic layer stacking, i.e., alternative growth of Bi2O2 layer and [Fe0.5Mn0.5]O6 layer. The strain-driven approach is further demonstrated in other SC candidate systems with promising room-temperature multiferroic properties. This well-integrated theoretical and experimental study inspired by the Materials Genome Initiatives opens up a new avenue in searching and designing novel 2D layered complex oxides with enormous promises.« less

  1. Two-Dimensional Layered Oxide Structures Tailored by Self-Assembled Layer Stacking via Interfacial Strain

    SciTech Connect

    Zhang, Wenrui; Li, Mingtao; Chen, Aiping; Li, Leigang; Zhu, Yuanyuan; Xia, Zhenhai; Lu, Ping; Boullay, Philippe; Wu, Lijun; Zhu, Yimei; MacManus-Driscoll, Judith L.; Jia, Quanxi; Zhou, Honghui; Narayan, Jagdish; Zhang, Xinghang; Wang, Haiyan

    2016-06-13

    Two-dimensional (2D) nanostructures emerge as one of leading topics in fundamental materials science and could enable next generation nanoelectronic devices. Beyond graphene and molybdenum disulphide, layered complex oxides are another large group of promising 2D candidates because of their strong interplay of intrinsic charge, spin, orbital and lattice. As a fundamental basis of heteroepitaxial thin film growth, interfacial strain can be used to design materials exhibiting new phenomena beyond their conventional form. Here we report the strain-driven self-assembly of Bismuth-based supercells (SC) with a 2D layered structure, and elucidate the fundamental growth mechanism with combined experimental tools and first-principles calculations. The study revealed that the new layered structures were formed by the strain-enabled self-assembled atomic layer stacking, i.e., alternative growth of Bi2O2 layer and [Fe0.5Mn0.5]O6 layer. The strain-driven approach is further demonstrated in other SC candidate systems with promising room-temperature multiferroic properties. This well-integrated theoretical and experimental study inspired by the Materials Genome Initiatives opens up a new avenue in searching and designing novel 2D layered complex oxides with enormous promises.

  2. Investigating fold structures of 2D materials by quantitative transmission electron microscopy.

    PubMed

    Wang, Zhiwei; Zhang, Zengming; Liu, Wei; Wang, Zhong Lin

    2017-04-01

    We report an approach developed for deriving 3D structural information of 2D membrane folds based on the recently-established quantitative transmission electron microscopy (TEM) in combination with density functional theory (DFT) calculations. Systematic multislice simulations reveal that the membrane folding leads to sufficiently strong electron scattering which enables a precise determination of bending radius. The image contrast depends also on the folding angles of 2D materials due to the variation of projection potentials, which however exerts much smaller effect compared with the bending radii. DFT calculations show that folded edges are typically characteristic of (fractional) nanotubes with the same curvature retained after energy optimization. Owing to the exclusion of Stobbs factor issue, numerical simulations were directly used in comparison with the experimental measurements on an absolute contrast scale, which results in a successful determination of bending radius of folded monolayer MoS2 films. The method should be applicable to characterizing all 2D membranes with 3D folding features.

  3. Nonlinear soil-structure interaction calculations simulating the SIMQUAKE experiment using STEALTH 2D

    NASA Technical Reports Server (NTRS)

    Tang, H. T.; Hofmann, R.; Yee, G.; Vaughan, D. K.

    1980-01-01

    Transient, nonlinear soil-structure interaction simulations of an Electric Power Research Institute, SIMQUAKE experiment were performed using the large strain, time domain STEALTH 2D code and a cyclic, kinematically hardening cap soil model. Results from the STEALTH simulations were compared to identical simulations performed with the TRANAL code and indicate relatively good agreement between all the STEALTH and TRANAL calculations. The differences that are seen can probably be attributed to: (1) large (STEALTH) vs. small (TRANAL) strain formulation and/or (2) grid discretization differences.

  4. Tight-Binding Approximations in 1D and 2D Coupled-Cavity Photonic Crystal Structures

    NASA Astrophysics Data System (ADS)

    Day, Nicole C. L.

    Light confinement and controlling an optical field has numerous applications in the field of telecommunications for optical signals processing. When the wavelength of the electromagnetic field is on the order of the period of a photonic microstructure, the field undergoes reflection, refraction, and coherent scattering. This produces photonic bandgaps, forbidden frequency regions or spectral stop bands where light cannot exist. Dielectric perturbations that break the perfect periodicity of these structures produce what is analogous to an impurity state in the bandgap of a semiconductor. The defect modes that exist at discrete frequencies within the photonic bandgap are spatially localized about the cavity-defects in the photonic crystal. In this thesis the properties of two tight-binding approximations (TBAs) are investigated in one-dimensional and two-dimensional coupled-cavity photonic crystal structures. We require an efficient and simple approach that ensures the continuity of the electromagnetic field across dielectric interfaces in complex structures. In this thesis we develop E- and D-TBAs to calculate the modes in finite 1D and 2D two-defect coupled-cavity photonic crystal structures. In the E- and D-TBAs we expand the coupled-cavity [vector electron]-modes in terms of the individual [vector electron]- and [vector D meson]-modes, respectively. We investigate the dependence of the defect modes, their frequencies and quality factors on the relative placement of the defects in the photonic crystal structures. We then elucidate the differences between the two TBA formulations, and describe the conditions under which these formulations may be more robust when encountering a dielectric perturbation. Our 1D analysis showed that the 1D modes were sensitive to the structure geometry. The antisymmetric D mode amplitudes show that the D. TBA did not capture the correct (tangential [vector electron]-field) boundary conditions. However, the D-TBA did not yield

  5. Wind-tunnel experiments of turbulent flow over a surface-mounted 2-D block in a thermally-stratified boundary layer

    NASA Astrophysics Data System (ADS)

    Zhang, Wei; Markfort, Corey; Porté-Agel, Fernando

    2014-11-01

    Turbulent flows over complex surface topography have been of great interest in the atmospheric science and wind engineering communities. The geometry of the topography, surface roughness and temperature characteristics as well as the atmospheric thermal stability play important roles in determining momentum and scalar flux distribution. Studies of turbulent flow over simplified topography models, under neutrally stratified boundary-layer conditions, have provided insights into fluid dynamics. However, atmospheric thermal stability has rarely been considered in laboratory experiments, e.g., wind-tunnel experiments. Series of wind-tunnel experiments of thermally-stratified boundary-layer flow over a surface-mounted 2-D block, in a well-controlled boundary-layer wind tunnel, will be presented. Measurements using high-resolution PIV, x-wire/cold-wire anemometry and surface heat flux sensors were conducted to quantify the turbulent flow properties, including the size of the recirculation zone, coherent vortex structures and the subsequent boundary layer recovery. Results will be shown to address thermal stability effects on momentum and scalar flux distribution in the wake, as well as dominant mechanism of turbulent kinetic energy generation and consumption. The authors gratefully acknowledge funding from the Swiss National Foundation (Grant 200021-132122), the National Science Foundation (Grant ATM-0854766) and NASA (Grant NNG06GE256).

  6. The electronic structure and spin states of 2D graphene/VX2 (X = S, Se) heterostructures.

    PubMed

    Popov, Z I; Mikhaleva, N S; Visotin, M A; Kuzubov, A A; Entani, S; Naramoto, H; Sakai, S; Sorokin, P B; Avramov, P V

    2016-12-07

    The structural, magnetic and electronic properties of 2D VX2 (X = S, Se) monolayers and graphene/VX2 heterostructures were studied using a DFT+U approach. It was found that the stability of the 1T phases of VX2 monolayers is linked to strong electron correlation effects. The study of vertical junctions comprising of graphene and VX2 monolayers demonstrated that interlayer interactions lead to the formation of strong spin polarization of both graphene and VX2 fragments while preserving the linear dispersion of graphene-originated bands. It was found that the insertion of Mo atoms between the layers leads to n-doping of graphene with a selective transformation of graphene bands keeping the spin-down Dirac cone intact.

  7. Anion-induced structural transformation of a sulfate-incorporated 2D Cd(II)-organic framework

    NASA Astrophysics Data System (ADS)

    Lee, Li-Wei; Luo, Tzuoo-Tsair; Wang, Chih-Min; Lee, Gene-Hsiang; Peng, Shie-Ming; Liu, Yen-Hsiang; Lee, Sheng-Long; Lu, Kuang-Lieh

    2016-07-01

    A Cd(II)-organic framework {[Cd2(tpim)4(SO4)(H2O)2]·(SO4)·21H2O}n (1) was synthesized by reacting CdSO4·8/3H2O and 2,4,5-tri(4-pyridyl)imidazole (tpim) under hydrothermal conditions. A structural analysis showed that compound 1 adopts a layered structure in which the [Cd(tpim)2]n chains are linked by sulfate anions. These 2D layers are further packed into a 3D supramolecular framework via π-π interactions. The structure contains two types of SO42- anions, i.e., bridging SO42- and free SO42- anions, the latter of which are included in the large channels of the framework. Compound 1 exhibits interesting anion exchange behavior. In the presence of SCN- anions, both the bridging and free SO42- anions in 1 were completely exchanged by SCN- ligands to form a 1D species [Cd(tpim)2(SCN)2] (1A), in which the SCN- moieties function as a monodentate ligand. On the other hand, when compound 1 was ion exchanged with N3- anions in aqueous solution, the bridging SO42- moieties remained intact, and only the free guest SO42- were replaced by N3- anions. The gas adsorption behavior of the activated compound 1 was also investigated.

  8. 2D sandbox experiments of surfactant foams for mobility control and enhanced LNAPL recovery in layered soils

    NASA Astrophysics Data System (ADS)

    Longpré-Girard, Mélanie; Martel, Richard; Robert, Thomas; Lefebvre, René; Lauzon, Jean-Marc

    2016-10-01

    The ability of surfactant foam to enhance mobility control and LNAPL recovery in a heterogeneous porous media was investigated through sandbox experiments with p-xylene used as LNAPL. A layered heterogeneous porous media was represented in a 2D sandbox filled with two layers of coarse and medium silica sand. Based on previous tests, the surfactant solution used was Ammonyx Lo at a concentration of 0.1% (w/w). The sandbox experimental program included tracer tests done under both uncontaminated and contaminated conditions, foam injection under uncontaminated conditions and surfactant solution and foam injection under contaminated conditions. Tracer tests indicated that the permeability contrast between sand layers was increased by LNAPL contamination. Foam injection under uncontaminated conditions presented a S-shaped front that indicated a better mobility control than the piston-shaped front obtained during tracer tests. During foam injection, complete sweep of the sandbox was achieved with 1.8 pore volume (PV) compared to 2.8 PV during tracer injection, thus indicating better mobility control with foam. Pre-flush of the contaminated sandbox with surfactant solution initiated p-xylene mobilization but no free phase was recovered at the effluent. A negligible p-xylene residual saturation was reached following foam injection in the contaminated sandbox. However, mass balance indicated a total recovery of only 48% of the initial p-xylene, thus indicating an underestimation of the recovery by volatilization. Recovery by volatilization was corrected, which gave the following proportions of LNAPL recovery mechanisms: 19% by mobilization, 16% by dissolution and 65% by volatilization. Results show the potential efficiency of foam remediation of LNAPL source zones in heterogeneous porous media. Still, further developments are needed prior to field scale application, which could benefit from in situ foam production that would simplify on-site operations.

  9. Micro PIV measurements of turbulent flow over 2D structured roughness

    NASA Astrophysics Data System (ADS)

    Hartenberger, Joel; Perlin, Marc

    2015-11-01

    We investigate the turbulent boundary layer over surfaces with 2D spanwise square and triangular protrusions having nominal heights of 100 - 300 microns for Reynolds numbers ranging from Reτ ~ 1500 through Reτ ~ 4500 using a high speed, high magnification imaging system. Micro PIV analysis gives finely resolved velocity fields of the flow (on the order of 10 microns between vectors) enabling a detailed look at the inner region as well as the flow in the immediate vicinity of the roughness elements. Additionally, planar PIV with lower resolution is performed to capture the remainder of the boundary layer to the freestream flow. Varying the streamwise distance between individual roughness elements from one to ten times the nominal heights allows investigation of k-type and d-type roughness in both the transitionally rough and fully rough regimes. Preliminary results show a shift in the mean velocity profile similar to the results of previous studies. Turbulent statistics will be presented also. The authors would like to acknowledge the support of NAVSEA which funded this project through the Naval Engineering Education Center (NEEC).

  10. 2D Space-Confined Synthesis of Few-Layer MoS2 Anchored on Carbon Nanosheet for Lithium-Ion Battery Anode.

    PubMed

    Zhou, Jingwen; Qin, Jian; Zhang, Xiang; Shi, Chunsheng; Liu, Enzuo; Li, Jiajun; Zhao, Naiqin; He, Chunnian

    2015-04-28

    A facile and scalable 2D spatial confinement strategy is developed for in situ synthesizing highly crystalline MoS2 nanosheets with few layers (≤5 layers) anchored on 3D porous carbon nanosheet networks (3D FL-MoS2@PCNNs) as lithium-ion battery anode. During the synthesis, 3D self-assembly of cubic NaCl particles is adopted to not only serve as a template to direct the growth of 3D porous carbon nanosheet networks, but also create a 2D-confined space to achieve the construction of few-layer MoS2 nanosheets robustly lain on the surface of carbon nanosheet walls. In the resulting 3D architecture, the intimate contact between the surfaces of MoS2 and carbon nanosheets can effectively avoid the aggregation and restacking of MoS2 as well as remarkably enhance the structural integrity of the electrode, while the conductive matrix of 3D porous carbon nanosheet networks can ensure fast transport of both electrons and ions in the whole electrode. As a result, this unique 3D architecture manifests an outstanding long-life cycling capability at high rates, namely, a specific capacity as large as 709 mAh g(-1) is delivered at 2 A g(-1) and maintains ∼95.2% even after 520 deep charge/discharge cycles. Apart from promising lithium-ion battery anode, this 3D FL-MoS2@PCNN composite also has immense potential for applications in other areas such as supercapacitor, catalysis, and sensors.

  11. Four divalent transition metal carboxyarylphosphonate compounds: Hydrothermal synthesis, structural chemistry and generalized 2D FTIR correlation spectroscopy studies

    SciTech Connect

    Lei Ran; Chai Xiaochuan; Mei Hongxin; Zhang Hanhui; Chen Yiping; Sun Yanqiong

    2010-07-15

    Four divalent transition metal carboxyarylphosphonates, [Ni(4,4'-bipy)H{sub 2}L{sup 1}(HL{sup 1}){sub 2}(H{sub 2}O){sub 2}].2H{sub 2}O 1, [Ni{sub 2}(4,4'-bipy)(L{sup 2})(OH)(H{sub 2}O){sub 2}].3H{sub 2}O 2, Mn(phen){sub 2}(H{sub 2}L{sup 1}){sub 2}3 and Mn(phen)(HL{sup 2}) 4 (H{sub 3}L{sup 1}=p-H{sub 2}O{sub 3}PCH{sub 2}-C{sub 6}H{sub 4}-COOH, H{sub 3}L{sup 2}=m-H{sub 2}O{sub 3}PCH{sub 2}-C{sub 6}H{sub 4}-COOH, 4,4'-bipy=4,4'-bipyridine, phen=1,10-phenanthroline) were synthesized under hydrothermal conditions. 1 features 1D linear chains built from Ni(II) ions bridging 4,4'-bipy. In 2, neighboring Ni{sub 4} cluster units are connected by pairs of H{sub 3}L{sup 2} ligands to form 1D double-crankshaft chains, which are interconnected by pairs of 4,4'-bipy into 2D sheets. 3 exhibits 2D supramolecular layers via the R{sub 2}{sup 2}(8) ringed hydrogen bonding units. 4 has 1D ladderlike chains, in which the 4-membered rings are cross-linked by the organic moieties of the H{sub 3}L{sup 2} ligands. Additionally, 2D FTIR correlation analysis is applied with thermal and magnetic perturbation to clarify the structural changes of functional groups from H{sub 3}L{sup 1} and H{sub 3}L{sup 2} ligands in the compounds more efficiently. - Graphical abstract: A series of divalent transition metal carboxyarylphosphonate compounds were synthesized under hydrothermal conditions. The figure displays 2D sheet structure with large windows in compound 2.

  12. Effects of Strike on Automatic Depth Estimation for 2D Magnetic Structures

    NASA Astrophysics Data System (ADS)

    Bastani, M.; Kero, L.; Pedersen, L. B.; Johansson, R.

    2006-12-01

    Many analysis methods have been developed to process densely sampled magnetic and/or gravity data to estimate source parameters. Werner deconvolution (Werner, 1953), analytic signal (Nabighian, 1972) and Euler deconvolution(Thompson, 1983) are among the most popular methods. They work either on profile data (Bastani and Pedersen, 2001) or on a regular grid (Thurston et al., 2002). All methods developed to estimate source parameters of the 2D magnetic structures work in the strike co-ordinate system. Werner deconvolution makes use of profile data to locate and compute the depth to the top and dip of thin sheets (dikes) with infinite strike and depth extent. Nabighian (1972) introduced the analytic signal to calculate the dip and depth to a set of 2D magnetic sources. The strike angle is assumed to be the same for all the magnetic anomalies along the profile. These methods use the horizontal and vertical derivatives of the total magnetic field to estimate the source parameters. While the vertical derivative is independent of strike direction the horizontal derivative is proportional to the sine of the angle between the profile and strike directions: the profile angle. Bastani and Pedersen (2001) used the analytic signal of the total magnetic field anomaly along a profile to estimate the dip, depth, width and strike of dikes. They introduced a method to estimate the strike of various anomalies at selected points along profiles by searching for coherent signals in neighboring profiles. Here we have used the same method to estimate strike of 2D anomalies. In order to illustrate the importance of strike angle on the estimated source parameters we have constructed synthetic data from a model that comprises a set of thin dikes with the same physical characteristics but with different strikes. We then applied 2D Werner deconvolution, 2D analytic signal (by Bastani and Pedersen), 2D and 3D Euler deconvolution to the data set. As expected the depth estimates are highly biased

  13. Structural and magnetic properties of DyMn(2)D(6) synthesized under high deuterium pressure.

    PubMed

    Paul-Boncour, V; Filipek, S M; Wierzbicki, R; André, G; Bourée, F; Guillot, M

    2009-01-07

    DyMn(2)D(6) has been prepared by applying high gaseous deuterium pressure on DyMn(2). This phase is isostructural with other RMn(2)D(6) (R = Y, Er) compounds and crystallizes with a K(2)PtCl(6) type structure having an ordered anion and a partially disordered cation arrangement because Dy and half the Mn atoms are randomly substituted in the same 8c site. The reverse susceptibility follows a Curie-Weiss law with an effective moment of 10 μ(B) similar to that of DyMn(2). Short range magnetic order, corresponding to ferromagnetic correlations, is observed in the neutron patterns up to 10 K and can be attributed to Dy-Dy interactions. The decomposition of the deuteride into Mn and DyD(2), studied by thermal gravimetric analysis, occurs between 470 and 650 K. A further deuterium desorption takes place above 920 K.

  14. Layer Dependence and Light Tuning Surface Potential of 2D MoS2 on Various Substrates.

    PubMed

    Li, Feng; Qi, Junjie; Xu, Minxuan; Xiao, Jiankun; Xu, Yuliang; Zhang, Xiankun; Liu, Shuo; Zhang, Yue

    2017-04-01

    Here surface potential of chemical vapor deposition (CVD) grown 2D MoS2 with various layers is reported, and the effect of adherent substrate and light illumination on surface potential of monolayer MoS2 are investigated. The surface potential of MoS2 on Si/SiO2 substrate decreases from 4.93 to 4.84 eV with the increase in the number of layer from 1 to 4 or more. Especially, the surface potentials of monolayer MoS2 are strongly dependent on its adherent substrate, which are determined to be 4.55, 4.88, 4.93, 5.10, and 5.50 eV on Ag, graphene, Si/SiO2 , Au, and Pt substrates, respectively. Light irradiation is introduced to tuning the surface potential of monolayer MoS2 , with the increase in light intensity, the surface potential of MoS2 on Si/SiO2 substrate decreases from 4.93 to 4.74 eV, while increases from 5.50 to 5.56 eV on Pt substrate. The I-V curves on vertical of monolayer MoS2 /Pt heterojunction show the decrease in current with the increase of light intensity, and Schottky barrier height at MoS2 /Pt junctions increases from 0.302 to 0.342 eV. The changed surface potential can be explained by trapped charges on surface, photoinduced carriers, charge transfer, and local electric field.

  15. Constructing 2D layered hybrid CdS nanosheets/MoS2 heterojunctions for enhanced visible-light photocatalytic H2 generation

    NASA Astrophysics Data System (ADS)

    Ma, Song; Xie, Jun; Wen, Jiuqing; He, Kelin; Li, Xin; Liu, Wei; Zhang, Xiangchao

    2017-01-01

    In this work, a 2D hybrid CdS nanosheets(NSs)/MoS2 layered heterojunctions were successfully synthesized by a two-step hydrothermal method and subsequent ultrasonic treatment. The results showed that the loading ultrathin MoS2 NSs as co-catalysts could significantly boost the photocatalytic H2-evolution activity of CdS NSs. It is demonstrated that the optimized 2D CdS NSs/MoS2 (1.0 wt%) layered heterojunctions could achieve the highest photocatalytic H2-evolution activity of 1.75 mmol g-1 h-1 from an aqueous solution containing sulfide and sulfite under visible light, which is 2.03 times as high as that of the pristine CdS NSs. It is believed that the deposition of ultrathin MoS2 NSs and intimate 2D-2D coupling interfaces are mainly responsible for the excellent H2-evolution performance of 2D CdS NSs/MoS2 layered heterojunctions, owing to the effectively promoted separation and transportation of charge carriers and the enhanced following surface H2-evolution kinetics. Interestingly, the lactic acid and formic acid have also been demonstrated to be better sacrificial reagents than the Na2S/Na2SO3, for the photocatalytic H2 evolution over the 2D CdS NSs/MoS2 layered heterojunctions. It is hoped that the strategy of 2D-2D interfacical coupling based on CdS NSs can become a general strategy to improve the H2-evolution activity over various kinds of conventional semiconductor NSs.

  16. Design and performance of a cryogenic scanning tunneling microscope in high magnetic field for 2D layered materials study

    NASA Astrophysics Data System (ADS)

    Chuang, Tien-Ming; Chung, Pei-Fang; Guan, Syu-You; Yu, Shan-An; Liu, Che-An; Hsu, Chia-Sheng; Su, Chih-Chuan; Sankar, Raman; Chou, Fang-Cheng

    2015-03-01

    We will describe the design and performance of a cryogenic scanning tunneling microscope (STM) system in a high magnetic field. A Pan-type STM is mounted on a homemade low vibration 4He pot refrigerator, which can be operated in continuous flow mode at T ~ 1.6K and in a magnetic field of up to 9 Tesla. A cleavage device at T =4.2K stage is used to cleave the 2D layered materials before inserting into STM as well as functioning as the radiation shield. The liquid helium boil rate of 4.6 liters per day is achieved due to our careful design, which allows the measurement at base temperature up to 10 days. We will demonstrate its capability of measuring atomically registered energy resolved spectroscopic maps in both real space and momentum space by our recent results on Rashba BiTeI. This work is supported by Ministry of Science and Technology, Taiwan and Kenda Foundation, Taiwan.

  17. Experimental Database with Baseline CFD Solutions: 2-D and Axisymmetric Hypersonic Shock-Wave/Turbulent-Boundary-Layer Interactions

    NASA Technical Reports Server (NTRS)

    Marvin, Joseph G.; Brown, James L.; Gnoffo, Peter A.

    2013-01-01

    A database compilation of hypersonic shock-wave/turbulent boundary layer experiments is provided. The experiments selected for the database are either 2D or axisymmetric, and include both compression corner and impinging type SWTBL interactions. The strength of the interactions range from attached to incipient separation to fully separated flows. The experiments were chosen based on criterion to ensure quality of the datasets, to be relevant to NASA's missions and to be useful for validation and uncertainty assessment of CFD Navier-Stokes predictive methods, both now and in the future. An emphasis on datasets selected was on surface pressures and surface heating throughout the interaction, but include some wall shear stress distributions and flowfield profiles. Included, for selected cases, are example CFD grids and setup information, along with surface pressure and wall heating results from simulations using current NASA real-gas Navier-Stokes codes by which future CFD investigators can compare and evaluate physics modeling improvements and validation and uncertainty assessments of future CFD code developments. The experimental database is presented tabulated in the Appendices describing each experiment. The database is also provided in computer-readable ASCII files located on a companion DVD.

  18. A novel simple procedure to consider seismic soil structure interaction effects in 2D models

    NASA Astrophysics Data System (ADS)

    Jaramillo, Juan Diego; Gómez, Juan David; Restrepo, Doriam; Rivera, Santiago

    2014-09-01

    A method is proposed to estimate the seismic soil-structure-interaction (SSI) effects for use in engineering practice. It is applicable to 2D structures subjected to vertically incident shear waves supported by homogenous half-spaces. The method is attractive since it keeps the simplicity of the spectral approach, overcomes some of the difficulties and inaccuracies of existing classical techniques and yet it considers a physically consistent excitation. This level of simplicity is achieved through a response spectra modification factor that can be applied to the free-field 5%-damped response spectra to yield design spectral ordinates that take into account the scattered motions introduced by the interaction effects. The modification factor is representative of the Transfer Function (TF) between the structural relative displacements and the free-field motion, which is described in terms of its maximum amplitude and associated frequency. Expressions to compute the modification factor by practicing engineers are proposed based upon a parametric study using 576 cases representative of actual structures. The method is tested in 10 cases spanning a wide range of common fundamental vibration periods.

  19. Numerical simulation on the thermal radiative properties of a 2D SiO2/W/SiO2/W layered grating for thermophotovoltaic applications

    NASA Astrophysics Data System (ADS)

    Zhao, Yi; Fu, Ceji

    2016-10-01

    Tailoring the spectrum of thermal emission from the emitter is important for improving the performance of a thermophotovoltaic (TPV) system. In this work, a two-dimensional (2D) layered grating structure made of SiO2 and tungsten (W), which can realize wavelength-selective control of thermal emission, was proposed for a potential emitter in TPV applications. Numerical simulations of the spectral emissivity of the structure from the ultraviolet (UV) to the mid-infrared region reveals that the spectral-normal emissivity of the structure is enhanced to above 0.95 in the wavelength region from 0.55 μm to 1.9 μm for both TE and TM waves, but drops sharply at wavelength larger than 2 μm. Physical mechanisms responsible for the wavelength-selective emissivity were elucidated as due to resonance of magnetic polaritons (MPs) in the SiO2 spacer and in the grooves of the tungsten grating, Wood's anomaly (WA), excitation of surface plasmon polaritons (SPPs) and wave interference. Furthermore, the structure was found to exhibit quasi-diffuse and polarization-insensitive features of thermal emission, suggesting that the proposed structure can serve as the emitter in the design of high performance TPV systems.

  20. Structure Integral Transform Versus Radon Transform: A 2D Mathematical Tool for Invariant Shape Recognition.

    PubMed

    Wang, Bin; Gao, Yongsheng

    2016-12-01

    In this paper, we present a novel mathematical tool, Structure Integral Transform (SIT), for invariant shape description and recognition. Different from the Radon Transform (RT), which integrates the shape image function over a 1D line in the image plane, the proposed SIT builds upon two orthogonal integrals over a 2D K -cross dissecting structure spanning across all rotation angles by which the shape regions are bisected in each integral. The proposed SIT brings the following advantages over the RT: 1) it has the extra function of describing the interior structural relationship within the shape which provides a more powerful discriminative ability for shape recognition; 2) the shape regions are dissected by the K -cross in a coarse to fine hierarchical order that can characterize the shape in a better spatial organization scanning from the center to the periphery; and 3) it is easier to build a completely invariant shape descriptor. The experimental results of applying SIT to shape recognition demonstrate its superior performance over the well-known Radon transform, and the well-known shape contexts and the polar harmonic transforms.

  1. Methods to determine the Orientation and Velocity of 2-D structures based on multi- spacecraft data

    NASA Astrophysics Data System (ADS)

    Zhang, X.; Pu, Z.; Zhou, X.; Wang, J.; Zong, Q.; Shi, Q.

    2006-12-01

    Many techniques have been developed to study the axial orientation and/or velocity of 2-D structures (flux ropes), by analyzing in situ data from single or multiple spacecraft. To obtain the axial orientation, there are magnetic based MVA (BMVA), current based MVA (CMVA), Minimum Direction Derivative (MDD) and Multiple Triangulation Analysis (MTA) as a modified version of timing method. To further calculate the velocity, we have DeHoffmann-Teller analysis, Spatio-Temporal Difference (STD) and several version of timing method including MTA. After a brief introduction on the principle of these methods, we theoretically estimate their error ranges based on modeled structures to examine the validity of these techniques. Because of their different principles, their error bars are shown to be distinct, depending on the parameters (such as radius, model selected and even the satellite crossing path) of the certain structure. The error estimation thus provides us some clue on the selection of methods under different conditions. Some real events are further analyzed using these techniques as the example.

  2. Computational Study and Analysis of Structural Imperfections in 1D and 2D Photonic Crystals

    SciTech Connect

    Maskaly, Karlene Rosera

    2005-06-01

    increasing RMS roughness. Again, the homogenization approximation is able to predict these results. The problem of surface scratches on 1D photonic crystals is also addressed. Although the reflectivity decreases are lower in this study, up to a 15% change in reflectivity is observed in certain scratched photonic crystal structures. However, this reflectivity change can be significantly decreased by adding a low index protective coating to the surface of the photonic crystal. Again, application of homogenization theory to these structures confirms its predictive power for this type of imperfection as well. Additionally, the problem of a circular pores in 2D photonic crystals is investigated, showing that almost a 50% change in reflectivity can occur for some structures. Furthermore, this study reveals trends that are consistent with the 1D simulations: parameter changes that increase the absolute reflectivity of the photonic crystal will also increase its tolerance to structural imperfections. Finally, experimental reflectance spectra from roughened 1D photonic crystals are compared to the results predicted computationally in this thesis. Both the computed and experimental spectra correlate favorably, validating the findings presented herein.

  3. Quantitative Subsurface Atomic Structure Fingerprint for 2D Materials and Heterostructures by First-Principles-Calibrated Contact-Resonance Atomic Force Microscopy.

    PubMed

    Tu, Qing; Lange, Björn; Parlak, Zehra; Lopes, Joao Marcelo J; Blum, Volker; Zauscher, Stefan

    2016-07-26

    Interfaces and subsurface layers are critical for the performance of devices made of 2D materials and heterostructures. Facile, nondestructive, and quantitative ways to characterize the structure of atomically thin, layered materials are thus essential to ensure control of the resultant properties. Here, we show that contact-resonance atomic force microscopy-which is exquisitely sensitive to stiffness changes that arise from even a single atomic layer of a van der Waals-adhered material-is a powerful experimental tool to address this challenge. A combined density functional theory and continuum modeling approach is introduced that yields sub-surface-sensitive, nanomechanical fingerprints associated with specific, well-defined structure models of individual surface domains. Where such models are known, this information can be correlated with experimentally obtained contact-resonance frequency maps to reveal the (sub)surface structure of different domains on the sample.

  4. Optimization of hybrid organic-inorganic interdigitated photovoltaic device structure using a 2D diffusion model.

    PubMed

    Krali, Emiljana; Curry, Richard J

    2011-04-26

    To improve the efficiency of organic photovoltaic devices the inclusion of semiconducting nanoparticles such as PbS has been used to enhance near-infrared absorption. Additionally the use of interdigitated heterojunctions has been explored as a means of improving charge extraction. In this paper we provide a two-dimensional model taking into account these approaches with the aim of predicting an optimized device geometry to maximize the efficiency. The steady-state exciton population has been calculated in each of the active regions taking into account the full optical response based on using a finite difference approach to obtain approximate numerical solutions to the 2D exciton diffusion equation. On the basis of this we calculate the contribution of each active material to the device short circuit current and power conversion efficiency. We show that optimized structures can lead to power conversions efficiencies of ∼50% compared to a maximum of ∼17% for planar heterojunction devices. To achieve this the interdigitated region thickness should be ∼800 nm with PbS and C(60) widths of ∼60 and 20 nm, respectively. Even modest nanopatterning using much thinner active regions provides improvements in efficiency and may be approached using a variety of methods including nanoimprinting lithography, nanotemplating, or the incorporation of presynthesized nanorod structures.

  5. Quantitative 2D HSQC NMR determination of polymer structures by selecting suitable internal standard references.

    PubMed

    Zhang, Liming; Gellerstedt, Göran

    2007-01-01

    A new analytical method based on the 2D HSQC NMR sequence is presented, which can be applied for quantitative structural determination of complicated polymers. The influence of T1 and T2 relaxations, off-resonance effects, coupling constants and homonuclear couplings are discussed. It was found that the T2 values measured on polymeric samples with the conventional HSQC-CPMG sequence could not be used to correct the errors caused by T2 relaxations during the polarization transfer delay. A unique way of selecting the proper internal standard reference signal(s) is therefore proposed to eliminate the major errors caused by T2 relaxations, resonance offsets, coupling constant deviations and homonuclear couplings. Two polymer samples, a cellulose triacetate and an acetylated lignin, have been used to illustrate the principles. The methodology developed in this work is robust to instrument miss-setting and it can find wide-spread applications in areas where a quantitative analysis of structurally complicated polymers is necessary.

  6. Atom Probe Tomography Analysis of Ag Doping in 2D Layered Material (PbSe)5(Bi2Se3)3.

    PubMed

    Ren, Xiaochen; Singh, Arunima K; Fang, Lei; Kanatzidis, Mercouri G; Tavazza, Francesca; Davydov, Albert V; Lauhon, Lincoln J

    2016-10-12

    Impurity doping in two-dimensional (2D) materials can provide a route to tuning electronic properties, so it is important to be able to determine the distribution of dopant atoms within and between layers. Here we report the tomographic mapping of dopants in layered 2D materials with atomic sensitivity and subnanometer spatial resolution using atom probe tomography (APT). APT analysis shows that Ag dopes both Bi2Se3 and PbSe layers in (PbSe)5(Bi2Se3)3, and correlations in the position of Ag atoms suggest a pairing across neighboring Bi2Se3 and PbSe layers. Density functional theory (DFT) calculations confirm the favorability of substitutional doping for both Pb and Bi and provide insights into the observed spatial correlations in dopant locations.

  7. 2D FT-IR Study of Compositional and Structural Change in Developing Cotton Fibers

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Two-dimensional (2D) correlation analysis was applied to characterize the ATR spectral intensity fluctuations of immature and mature cotton fibers. Prior to 2D analysis, the spectra were leveled to zero at the peak intensity of 1800 cm-1 and then were normalized at the peak intensity of 660 cm-1 to ...

  8. Dynamic molecular structure and phase diagram of DPPC-cholesterol binary mixtures: a 2D-ELDOR study.

    PubMed

    Chiang, Yun-Wei; Costa-Filho, Antonio J; Freed, Jack H

    2007-09-27

    This paper is an application of 2D electron-electron double resonance (2D-ELDOR) with the "full Sc- method" to study model membranes. We obtain and confirm the phase diagram of 1,2-dipalmitoyl-sn-glycerophosphatidylcholine (DPPC)-cholesterol binary mixtures versus temperature and provide quantitative descriptions for its dynamic molecular structure using 2D-ELDOR at the Ku band. The spectra from the end-chain 16-PC spin label in multilamellar phospholipid vesicles are obtained for cholesterol molar concentrations ranging from 0 to 50% and from 25 to 60 degrees C. This phase diagram consists of liquid-ordered, liquid-disordered, and gel phases and phase coexistence regions. The phase diagram is carefully examined according to the spectroscopic evidence, and the rigorous interpretation for the line shape changes. We show that the 2D-ELDOR spectra differ markedly with variation in the composition. The extensive line shape changes in the 2D-plus-mixing-time representation provide useful information to define and characterize the membrane phases with respect to their dynamic molecular structures and to determine the phase boundaries. The homogeneous T2's are extracted from the pure absorption spectra and are used to further distinguish the membrane phases. These results show 2D-ELDOR to be naturally suitable for probing and reporting the dynamic structures of microdomains in model membrane systems and, moreover, providing a very detailed picture of their molecular dynamic structure, especially with the aid of the "full Sc- method".

  9. Model-based segmentation and quantification of subcellular structures in 2D and 3D fluorescent microscopy images

    NASA Astrophysics Data System (ADS)

    Wörz, Stefan; Heinzer, Stephan; Weiss, Matthias; Rohr, Karl

    2008-03-01

    We introduce a model-based approach for segmenting and quantifying GFP-tagged subcellular structures of the Golgi apparatus in 2D and 3D microscopy images. The approach is based on 2D and 3D intensity models, which are directly fitted to an image within 2D circular or 3D spherical regions-of-interest (ROIs). We also propose automatic approaches for the detection of candidates, for the initialization of the model parameters, and for adapting the size of the ROI used for model fitting. Based on the fitting results, we determine statistical information about the spatial distribution and the total amount of intensity (fluorescence) of the subcellular structures. We demonstrate the applicability of our new approach based on 2D and 3D microscopy images.

  10. Synthesis and structure of a 2D → 3D framework with coexistence of hydrogen bonds and polythreading character

    SciTech Connect

    Zhang, Ming-Dao Zhuang, Qi-Fan; Xu, Jing; Cao, Hui

    2015-12-15

    The title complex, ([Co(BPPA)(5-OH-bdc)] · (H{sub 2}O)){sub n} was prepared under hydrothermal conditions based on two ligands, namely, bis(4-(pyridin-4-yl)phenyl)amine (BPPA) and 5-hydroxyisophthalic acid (5-OH-H{sub 2}bdc). 5-OH-bdc{sup 2–} anions coordinated to Co atoms to give layers in crystal. BPPA ligands coordinate to Co atoms and thread into the adjacent layers. There are hydrogen bonds between adjacent layers, giving rise to a 2D → 3D framework.

  11. Guided Lamb wave based 2-D spiral phased array for structural health monitoring of thin panel structures

    NASA Astrophysics Data System (ADS)

    Yoo, Byungseok

    2011-12-01

    In almost all industries of mechanical, aerospace, and civil engineering fields, structural health monitoring (SHM) technology is essentially required for providing the reliable information of structural integrity of safety-critical structures, which can help reduce the risk of unexpected and sometimes catastrophic failures, and also offer cost-effective inspection and maintenance of the structures. State of the art SHM research on structural damage diagnosis is focused on developing global and real-time technologies to identify the existence, location, extent, and type of damage. In order to detect and monitor the structural damage in plate-like structures, SHM technology based on guided Lamb wave (GLW) interrogation is becoming more attractive due to its potential benefits such as large inspection area coverage in short time, simple inspection mechanism, and sensitivity to small damage. However, the GLW method has a few critical issues such as dispersion nature, mode conversion and separation, and multiple-mode existence. Phased array technique widely used in all aspects of civil, military, science, and medical industry fields may be employed to resolve the drawbacks of the GLW method. The GLW-based phased array approach is able to effectively examine and analyze complicated structural vibration responses in thin plate structures. Because the phased sensor array operates as a spatial filter for the GLW signals, the array signal processing method can enhance a desired signal component at a specific direction while eliminating other signal components from other directions. This dissertation presents the development, the experimental validation, and the damage detection applications of an innovative signal processing algorithm based on two-dimensional (2-D) spiral phased array in conjunction with the GLW interrogation technique. It starts with general backgrounds of SHM and the associated technology including the GLW interrogation method. Then, it is focused on the

  12. Monolignol acylation and lignin structure in some nonwoody plants: a 2D NMR study.

    PubMed

    Martínez, Angel T; Rencoret, Jorge; Marques, Gisela; Gutiérrez, Ana; Ibarra, David; Jiménez-Barbero, Jesús; del Río, José C

    2008-11-01

    Lignins from three nonwoody angiosperms were analyzed by 2D NMR revealing important differences in their molecular structures. The Musa textilis milled-wood-lignin (MWL), with a syringyl-to-guaiacyl (S/G) ratio of 9, was strongly acylated (near 85% of side-chains) at the gamma-carbon by both acetates and p-coumarates, as estimated from (1)H-(13)C correlations in C(gamma)-esterified and C(gamma)-OH units. The p-coumarate H(3,5)-C(3,5) correlation signal was completely displaced by acetylation, and disappeared after alkali treatment, indicating that p-coumaric acid was esterified maintaining its free phenolic group. By contrast, the Cannabis sativa MWL (S/G approximately 0.8) was free of acylating groups, and the Agave sisalana MWL (S/G approximately 4) showed high acylation degree (near 80%) but exclusively with acetates. Extensive C(gamma)-acylation results in the absence (in M. textilis lignin) or low abundance (4% in A. sisalana lignin) of beta-beta' resinol linkages, which require free C(gamma)-OH to form the double tetrahydrofuran ring. However, minor signals revealed unusual acylated beta-beta' structures confirming that acylation is produced at the monolignol level, in agreement with chromatographic identification of gamma-acetylated sinapyl alcohol among the plant extractives. In contrast, resinol substructures involved 22% side-chains in the C.sativa MWL. The ratio between beta-beta' and beta-O-4' side-chains in these and other MWL varied from 0.32 in C.sativa MWL to 0.02 in M. textilis MWL, and was inversely correlated with the degree of acylation. The opposite was observed for the S/G ratio that was directly correlated with the acylation degree. Monolignol acylation is discussed as a mechanism potentially involved in the control of lignin structure.

  13. 2D Tl-Pb compounds on Ge(1 1 1) surface: atomic arrangement and electronic band structure.

    PubMed

    Gruznev, D V; Bondarenko, L V; Tupchaya, A Y; Eremeev, S V; Mihalyuk, A N; Chou, J P; Wei, C M; Zotov, A V; Saranin, A A

    2017-01-25

    Structural transformations and evolution of the electron band structure in the (Tl, Pb)/Ge(1 1 1) system have been studied using low-energy electron diffraction, scanning tunneling microscopy, angle-resolved photoelectron spectroscopy and density functional theory calculations. The two 2D Tl-Pb compounds on Ge(1 1 1), [Formula: see text]-(Tl, Pb) and [Formula: see text]-(Tl, Pb), have been found and their composition, atomic arrangement and electron properties has been characterized. The (Tl, Pb)/Ge(1 1 1)[Formula: see text] compound is almost identical to the alike (Tl, Pb)/Si(1 1 1)[Formula: see text] system from the viewpoint of its atomic structure and electronic properties. They contain 1.0 ML of Tl atoms arranged into a honeycomb network of chained trimers and 1/3 ML of Pb atoms occupying the centers of the honeycomb units. The (Tl, Pb)/Ge(1 1 1)[Formula: see text] compound contains six Tl atoms and seven Pb atoms per [Formula: see text] unit cell (i.e.  ∼0.67 ML Tl and  ∼0.78 ML Pb). Its atomic structure can be visualized as consisting of Pb hexagons surrounded by Tl trimers. The (Tl, Pb)/Ge(1 1 1)[Formula: see text] and (Tl, Pb)/Ge(1 1 1)[Formula: see text] compounds are metallic and their band structures contain spin-split surface-state bands. By analogy with the (Tl, Pb)/Si(1 1 1)[Formula: see text], these (Tl, Pb)/Ge(1 1 1) compounds are believed to be promising objects for prospective studies of superconductivity in one-atom-layer systems.

  14. 2D Tl-Pb compounds on Ge(1 1 1) surface: atomic arrangement and electronic band structure

    NASA Astrophysics Data System (ADS)

    Gruznev, D. V.; Bondarenko, L. V.; Tupchaya, A. Y.; Eremeev, S. V.; Mihalyuk, A. N.; Chou, J. P.; Wei, C. M.; Zotov, A. V.; Saranin, A. A.

    2017-01-01

    Structural transformations and evolution of the electron band structure in the (Tl, Pb)/Ge(1 1 1) system have been studied using low-energy electron diffraction, scanning tunneling microscopy, angle-resolved photoelectron spectroscopy and density functional theory calculations. The two 2D Tl-Pb compounds on Ge(1 1 1), \\sqrt{3}× \\sqrt{3} -(Tl, Pb) and 3× 3 -(Tl, Pb), have been found and their composition, atomic arrangement and electron properties has been characterized. The (Tl, Pb)/Ge(1 1 1)\\sqrt{3}× \\sqrt{3} compound is almost identical to the alike (Tl, Pb)/Si(1 1 1)\\sqrt{3}× \\sqrt{3} system from the viewpoint of its atomic structure and electronic properties. They contain 1.0 ML of Tl atoms arranged into a honeycomb network of chained trimers and 1/3 ML of Pb atoms occupying the centers of the honeycomb units. The (Tl, Pb)/Ge(1 1 1)3× 3 compound contains six Tl atoms and seven Pb atoms per 3× 3 unit cell (i.e.  ˜0.67 ML Tl and  ˜0.78 ML Pb). Its atomic structure can be visualized as consisting of Pb hexagons surrounded by Tl trimers. The (Tl, Pb)/Ge(1 1 1)\\sqrt{3}× \\sqrt{3} and (Tl, Pb)/Ge(1 1 1)3× 3 compounds are metallic and their band structures contain spin-split surface-state bands. By analogy with the (Tl, Pb)/Si(1 1 1)\\sqrt{3}× \\sqrt{3} , these (Tl, Pb)/Ge(1 1 1) compounds are believed to be promising objects for prospective studies of superconductivity in one-atom-layer systems.

  15. Segmentation of Textures Defined on Flat vs. Layered Surfaces using Neural Networks: Comparison of 2D vs. 3D Representations.

    PubMed

    Oh, Sejong; Choe, Yoonsuck

    2007-08-01

    Texture boundary detection (or segmentation) is an important capability in human vision. Usually, texture segmentation is viewed as a 2D problem, as the definition of the problem itself assumes a 2D substrate. However, an interesting hypothesis emerges when we ask a question regarding the nature of textures: What are textures, and why did the ability to discriminate texture evolve or develop? A possible answer to this question is that textures naturally define physically distinct (i.e., occluded) surfaces. Hence, we can hypothesize that 2D texture segmentation may be an outgrowth of the ability to discriminate surfaces in 3D. In this paper, we conducted computational experiments with artificial neural networks to investigate the relative difficulty of learning to segment textures defined on flat 2D surfaces vs. those in 3D configurations where the boundaries are defined by occluding surfaces and their change over time due to the observer's motion. It turns out that learning is faster and more accurate in 3D, very much in line with our expectation. Furthermore, our results showed that the neural network's learned ability to segment texture in 3D transfers well into 2D texture segmentation, bolstering our initial hypothesis, and providing insights on the possible developmental origin of 2D texture segmentation function in human vision.

  16. Prestack depth migration for complex 2D structure using phase-screen propagators

    SciTech Connect

    Roberts, P.; Huang, Lian-Jie; Burch, C.; Fehler, M.; Hildebrand, S.

    1997-11-01

    We present results for the phase-screen propagator method applied to prestack depth migration of the Marmousi synthetic data set. The data were migrated as individual common-shot records and the resulting partial images were superposed to obtain the final complete Image. Tests were performed to determine the minimum number of frequency components required to achieve the best quality image and this in turn provided estimates of the minimum computing time. Running on a single processor SUN SPARC Ultra I, high quality images were obtained in as little as 8.7 CPU hours and adequate images were obtained in as little as 4.4 CPU hours. Different methods were tested for choosing the reference velocity used for the background phase-shift operation and for defining the slowness perturbation screens. Although the depths of some of the steeply dipping, high-contrast features were shifted slightly the overall image quality was fairly insensitive to the choice of the reference velocity. Our jests show the phase-screen method to be a reliable and fast algorithm for imaging complex geologic structures, at least for complex 2D synthetic data where the velocity model is known.

  17. Structural study of synthetic mica montmorillonite by means of 2D MAS NMR experiments

    NASA Astrophysics Data System (ADS)

    Alba, M. D.; Castro, M. A.; Chain, P.; Naranjo, M.; Perdigón, A. C.

    2005-07-01

    Syn-1, is a synthetic mica montmorillonite interstratified mineral that forms one of the standard clay samples in the Clay Minerals Society Source Clays Project. However, there are still controversies regarding some structural aspects such as the interlayer composition or the location of the extra-aluminium determined by chemical analysis. The main objective of this paper is to shed light on those structural aspects that affect the reactivity of the interstratified minerals. For this purpose, we have used 1 H 29 Si and 1 H 27Al HETCOR MAS NMR to show that it is likely that the interlayer space of the beidellite part is composed of ammonium ions whereas ammonium and aluminium ions are responsible for the charge balance in the mica type layer.

  18. Two novel 2D lanthanide sulfate frameworks: Syntheses, structures, and luminescence properties

    NASA Astrophysics Data System (ADS)

    Li, Zhong-Yi; Zhang, Chi; Zhang, Fu-Li; Zhang, Fu-Qiang; Zhang, Xiang-Fei; Li, Su-Zhi; Cao, Guang-Xiu; Zhai, Bin

    2016-03-01

    Two novel lanthanide-sulfate compounds, [Ln2(SO4)3(H2O)8] (Ln = Tb (1) and Dy (2)), have been synthesized under hydrothermal reactions. X-ray crystal structure analyses reveal that 1 and 2 are isomorphous and crystallize in monoclinic C2/c pace group, showing a layered structure. The layers bear a rare quasi-honeycomb metal arrangement, which is fastened by μ3 = η1:η1:η1 and μ2 = η1:η1 sulfates. If assigning the μ3 = η1:η1:η1 sulfate as a 3-connected node and the Ln3+ ion as a 4-connected node, the network can be rationalized as a binodal (3,4)-connected V2O5 topology with a Schäfli symbol of (42·63·8) (42·6). In addition, the infrared, thermogravimetric analysis and luminescent properties were also studied. Complexes 1 and 2 exhibit outstanding thermal stability and characteristic terbium and dysprosium luminescence.

  19. Demonstration of synchronised scanning Lidar measurements of 2D velocity fields in a boundary-layer wind tunnel

    NASA Astrophysics Data System (ADS)

    van Dooren, M. F.; Kühn, M.; PetroviĆ, V.; Bottasso, C. L.; Campagnolo, F.; Sjöholm, M.; Angelou, N.; Mikkelsen, T.; Croce, A.; Zasso, A.

    2016-09-01

    This paper combines the currently relevant research methodologies of scaled wind turbine model experiments in wind tunnels with remote-sensing short-range WindScanner Lidar measurement technology. The wind tunnel of the Politecnico di Milano was equipped with three wind turbine models and two short-range WindScanner Lidars to demonstrate the benefits of synchronised scanning Lidars in such experimental surroundings for the first time. The dual- Lidar system can provide fully synchronised trajectory scans with sampling time scales ranging from seconds to minutes. First, staring mode measurements were compared to hot wire probe measurements commonly used in wind tunnels. This yielded goodness of fit coefficients of 0.969 and 0.902 for the 1 Hz averaged u- and v-components of the wind speed, respectively, validating the 2D measurement capability of the Lidar scanners. Subsequently, the measurement of wake profiles on a line as well as wake area scans were executed to illustrate the applicability of Lidar scanning to measuring small scale wind flow effects. The downsides of Lidar with respect to the hot wire probes are the larger measurement probe volume and the loss of some measurements due to moving blades. In contrast, the benefits are the high flexibility in conducting both point measurements and area scanning, and the fact that remote sensing techniques do not disturb the flow while measuring. The research campaign revealed a high potential for using short-range WindScanner Lidar for accurately measuring small scale flow structures in a wind tunnel.

  20. 2D layered transport properties from topological insulator Bi2Se3 single crystals and micro flakes

    PubMed Central

    Chiatti, Olivio; Riha, Christian; Lawrenz, Dominic; Busch, Marco; Dusari, Srujana; Sánchez-Barriga, Jaime; Mogilatenko, Anna; Yashina, Lada V.; Valencia, Sergio; Ünal, Akin A.; Rader, Oliver; Fischer, Saskia F.

    2016-01-01

    Low-field magnetotransport measurements of topological insulators such as Bi2Se3 are important for revealing the nature of topological surface states by quantum corrections to the conductivity, such as weak-antilocalization. Recently, a rich variety of high-field magnetotransport properties in the regime of high electron densities (∼1019 cm−3) were reported, which can be related to additional two-dimensional layered conductivity, hampering the identification of the topological surface states. Here, we report that quantum corrections to the electronic conduction are dominated by the surface states for a semiconducting case, which can be analyzed by the Hikami-Larkin-Nagaoka model for two coupled surfaces in the case of strong spin-orbit interaction. However, in the metallic-like case this analysis fails and additional two-dimensional contributions need to be accounted for. Shubnikov-de Haas oscillations and quantized Hall resistance prove as strong indications for the two-dimensional layered metallic behavior. Temperature-dependent magnetotransport properties of high-quality Bi2Se3 single crystalline exfoliated macro and micro flakes are combined with high resolution transmission electron microscopy and energy-dispersive x-ray spectroscopy, confirming the structure and stoichiometry. Angle-resolved photoemission spectroscopy proves a single-Dirac-cone surface state and a well-defined bulk band gap in topological insulating state. Spatially resolved core-level photoelectron microscopy demonstrates the surface stability. PMID:27270569

  1. Application of conformal map theory for design of 2-D ultrasonic array structure for NDT imaging application: a feasibility study.

    PubMed

    Ramadas, Sivaram N; Jackson, Joseph C; Dziewierz, Jerzy; O'Leary, Richard; Gachagan, Anthony

    2014-03-01

    Two-dimensional ultrasonic phased arrays are becoming increasingly popular in nondestructive evaluation (NDE). Sparse array element configurations are required to fully exploit the potential benefits of 2-D phased arrays. This paper applies the conformal mapping technique as a means of designing sparse 2-D array layouts for NDE applications. Modeling using both Huygens' field prediction theory and 2-D fast Fourier transformation is employed to study the resulting new structure. A conformal power map was used that, for fixed beam width, was shown in simulations to have a greater contrast than rectangular or random arrays. A prototype aperiodic 2-D array configuration for direct contact operation in steel, with operational frequency ~3 MHz, was designed using the array design principle described in this paper. Experimental results demonstrate a working sparse-array transducer capable of performing volumetric imaging.

  2. Effects of Precipitation on Ocean Mixed-Layer Temperature and Salinity as Simulated in a 2-D Coupled Ocean-Cloud Resolving Atmosphere Model

    NASA Technical Reports Server (NTRS)

    Li, Xiaofan; Sui, C.-H.; Lau, K-M.; Adamec, D.

    1999-01-01

    A two-dimensional coupled ocean-cloud resolving atmosphere model is used to investigate possible roles of convective scale ocean disturbances induced by atmospheric precipitation on ocean mixed-layer heat and salt budgets. The model couples a cloud resolving model with an embedded mixed layer-ocean circulation model. Five experiment are performed under imposed large-scale atmospheric forcing in terms of vertical velocity derived from the TOGA COARE observations during a selected seven-day period. The dominant variability of mixed-layer temperature and salinity are simulated by the coupled model with imposed large-scale forcing. The mixed-layer temperatures in the coupled experiments with 1-D and 2-D ocean models show similar variations when salinity effects are not included. When salinity effects are included, however, differences in the domain-mean mixed-layer salinity and temperature between coupled experiments with 1-D and 2-D ocean models could be as large as 0.3 PSU and 0.4 C respectively. Without fresh water effects, the nocturnal heat loss over ocean surface causes deep mixed layers and weak cooling rates so that the nocturnal mixed-layer temperatures tend to be horizontally-uniform. The fresh water flux, however, causes shallow mixed layers over convective areas while the nocturnal heat loss causes deep mixed layer over convection-free areas so that the mixed-layer temperatures have large horizontal fluctuations. Furthermore, fresh water flux exhibits larger spatial fluctuations than surface heat flux because heavy rainfall occurs over convective areas embedded in broad non-convective or clear areas, whereas diurnal signals over whole model areas yield high spatial correlation of surface heat flux. As a result, mixed-layer salinities contribute more to the density differences than do mixed-layer temperatures.

  3. Stacking sequence determines Raman intensities of observed interlayer shear modes in 2D layered materials--A general bond polarizability model.

    PubMed

    Luo, Xin; Lu, Xin; Cong, Chunxiao; Yu, Ting; Xiong, Qihua; Quek, Su Ying

    2015-10-15

    2D layered materials have recently attracted tremendous interest due to their fascinating properties and potential applications. The interlayer interactions are much weaker than the intralayer bonds, allowing the as-synthesized materials to exhibit different stacking sequences, leading to different physical properties. Here, we show that regardless of the space group of the 2D materials, the Raman frequencies of the interlayer shear modes observed under the typical z(xx)z configuration blue shift for AB stacked materials, and red shift for ABC stacked materials, as the number of layers increases. Our predictions are made using an intuitive bond polarizability model which shows that stacking sequence plays a key role in determining which interlayer shear modes lead to the largest change in polarizability (Raman intensity); the modes with the largest Raman intensity determining the frequency trends. We present direct evidence for these conclusions by studying the Raman modes in few layer graphene, MoS2, MoSe2, WSe2 and Bi2Se3, using both first principles calculations and Raman spectroscopy. This study sheds light on the influence of stacking sequence on the Raman intensities of intrinsic interlayer modes in 2D layered materials in general, and leads to a practical way of identifying the stacking sequence in these materials.

  4. Two-Dimensional Layered Oxide Structures Tailored by Self-Assembled Layer Stacking via Interfacial Strain.

    PubMed

    Zhang, Wenrui; Li, Mingtao; Chen, Aiping; Li, Leigang; Zhu, Yuanyuan; Xia, Zhenhai; Lu, Ping; Boullay, Philippe; Wu, Lijun; Zhu, Yimei; MacManus-Driscoll, Judith L; Jia, Quanxi; Zhou, Honghui; Narayan, Jagdish; Zhang, Xinghang; Wang, Haiyan

    2016-07-06

    Study of layered complex oxides emerge as one of leading topics in fundamental materials science because of the strong interplay among intrinsic charge, spin, orbital, and lattice. As a fundamental basis of heteroepitaxial thin film growth, interfacial strain can be used to design materials that exhibit new phenomena beyond their conventional forms. Here, we report a strain-driven self-assembly of bismuth-based supercell (SC) with a two-dimensional (2D) layered structure. With combined experimental analysis and first-principles calculations, we investigated the full SC structure and elucidated the fundamental growth mechanism achieved by the strain-enabled self-assembled atomic layer stacking. The unique SC structure exhibits room-temperature ferroelectricity, enhanced magnetic responses, and a distinct optical bandgap from the conventional double perovskite structure. This study reveals the important role of interfacial strain modulation and atomic rearrangement in self-assembling a layered singe-phase multiferroic thin film, which opens up a promising avenue in the search for and design of novel 2D layered complex oxides with enormous promise.

  5. Synthesizing 2D and 3D Selenidostannates in Ionic Liquids: The Synergistic Structure-Directing Effects of Ionic Liquids and Metal-Amine Complexes.

    PubMed

    Du, Cheng-Feng; Shen, Nan-Nan; Li, Jian-Rong; Hao, Min-Ting; Wang, Zi; Huang, Xiao-Ying

    2016-05-20

    Presented are the ionothermal syntheses, characterizations, and properties of a series of two- and three-dimensional selenidostannate compounds synergistically directed by metal-amine complex (MAC) cations and ionic liquids (ILs) of [Bmmim]Cl (Bmmim=1-butyl-2,3-dimethylimidazolium). Four selenidostannates, namely, 2D-(Bmmim)3 [Ni(en)3 ]2 [Sn9 Se21 ]Cl (1, en=ethylenediamine), 2D-(Bmmim)8 [Ni2 (teta)2 (μ-teta)]Sn18 Se42 (2, teta=triethylenetetramine), 2D-(Bmmim)4 [Ni(tepa)Cl]2 [Ni(tepa)Sn12 Se28 ] (3, tepa=tetraethylenepentamine), and 3D-(Bmmim)2 [Ni(1,2-pda)3 ]Sn8 Se18 (4, 1,2-pda=1,2-diaminopropane), were obtained. Single-crystal X-ray diffraction analyses revealed that compounds 1 and 2 possess a lamellar anionic [Sn3 Se7 ]n (2n-) structure comprising distinct eight-membered ring units, whereas 3 features a MAC-decorated anionic [Ni(tepa)Sn12 Se28 ]n (6n-) layered structure. In contrast to 1-3, compound 4 exhibits a 3D open framework of anionic [Sn4 Se9 ]n (2n-) . The structural variation from 1 to 4 clearly indicates that on the basis of the synergistic structure-directing ability of the MACs and ILs, variation of the organic polyamine ligand has a significant impact on the formation of selenidostannates.

  6. A Fast Parallel Algorithm for Selected Inversion of Structured Sparse Matrices with Application to 2D Electronic Structure Calculations

    SciTech Connect

    Lin, Lin; Yang, Chao; Lu, Jiangfeng; Ying, Lexing; E, Weinan

    2009-09-25

    We present an efficient parallel algorithm and its implementation for computing the diagonal of $H^-1$ where $H$ is a 2D Kohn-Sham Hamiltonian discretized on a rectangular domain using a standard second order finite difference scheme. This type of calculation can be used to obtain an accurate approximation to the diagonal of a Fermi-Dirac function of $H$ through a recently developed pole-expansion technique \\cite{LinLuYingE2009}. The diagonal elements are needed in electronic structure calculations for quantum mechanical systems \\citeHohenbergKohn1964, KohnSham 1965,DreizlerGross1990. We show how elimination tree is used to organize the parallel computation and how synchronization overhead is reduced by passing data level by level along this tree using the technique of local buffers and relative indices. We analyze the performance of our implementation by examining its load balance and communication overhead. We show that our implementation exhibits an excellent weak scaling on a large-scale high performance distributed parallel machine. When compared with standard approach for evaluating the diagonal a Fermi-Dirac function of a Kohn-Sham Hamiltonian associated a 2D electron quantum dot, the new pole-expansion technique that uses our algorithm to compute the diagonal of $(H-z_i I)^-1$ for a small number of poles $z_i$ is much faster, especially when the quantum dot contains many electrons.

  7. Crystal structure and antiferromagnetic ordering of quasi-2D [Cu(HF{sub 2})(pyz){sub 2}]TaF{sub 6} (pyz = pyrazine).

    SciTech Connect

    Manson, J. L.; Schlueter, J. A.; McDonald, R. D.; Singleton, J.; Materials Science Division; Eastern Washington Univ.; LANL

    2010-04-01

    The crystal structure of the title compound was determined by X-ray diffraction at 90 and 295 K. Copper(II) ions are coordinated to four bridging pyz ligands to form square layers in the ab-plane. Bridging HF{sub 2}{sup -} ligands join the layers together along the c-axis to afford a tetragonal, three-dimensional (3D) framework that contains Taf{sub 6}{sup -} anions in every cavity. At 295 K, the pyz rings lie exactly perpendicular to the layers and cooling to 90 K induces a canting of those rings. Magnetically, the compound exhibits 2D antiferromagnetic correlations within the 2D layers with an exchange interaction of -13.1(1) K. Weak interlayer interactions, as mediated by Cu-F-H-F-Cu, leads to long-range magnetic order below 4.2 K. Pulsed-field magnetization data at 0.5 K show a concave curvature with increasing B and reveal a saturation magnetization at 35.4 T.

  8. The conflicting role of buckled structure in phonon transport of 2D group-IV and group-V materials.

    PubMed

    Peng, Bo; Zhang, Dequan; Zhang, Hao; Shao, Hezhu; Ni, Gang; Zhu, Yongyuan; Zhu, Heyuan

    2017-03-20

    Controlling heat transport through material design is one important step toward thermal management in 2D materials. To control heat transport, a comprehensive understanding of how structure influences heat transport is required. It has been argued that a buckled structure is able to suppress heat transport by increasing the flexural phonon scattering. Using a first principles approach, we calculate the lattice thermal conductivity of 2D mono-elemental materials with a buckled structure. Somewhat counterintuitively, we find that although 2D group-V materials have a larger mass and higher buckling height than their group-IV counterparts, the calculated κ of blue phosphorene (106.6 W mK(-1)) is nearly four times higher than that of silicene (28.3 W mK(-1)), while arsenene (37.8 W mK(-1)) is more than fifteen times higher than germanene (2.4 W mK(-1)). We report for the first time that a buckled structure has three conflicting effects: (i) increasing the Debye temperature by increasing the overlap of the pz orbitals, (ii) suppressing the acoustic-optical scattering by forming an acoustic-optical gap, and (iii) increasing the flexural phonon scattering. The former two, corresponding to the harmonic phonon part, tend to enhance κ, while the last one, corresponding to the anharmonic part, suppresses it. This relationship between the buckled structure and phonon behaviour provides insight into how to control heat transport in 2D materials.

  9. 2D-RNA-coupling numbers: a new computational chemistry approach to link secondary structure topology with biological function.

    PubMed

    González-Díaz, Humberto; Agüero-Chapin, Guillermín; Varona, Javier; Molina, Reinaldo; Delogu, Giovanna; Santana, Lourdes; Uriarte, Eugenio; Podda, Gianni

    2007-04-30

    Methods for prediction of proteins, DNA, or RNA function and mapping it onto sequence often rely on bioinformatics alignment approach instead of chemical structure. Consequently, it is interesting to develop computational chemistry approaches based on molecular descriptors. In this sense, many researchers used sequence-coupling numbers and our group extended them to 2D proteins representations. However, no coupling numbers have been reported for 2D-RNA topology graphs, which are highly branched and contain useful information. Here, we use a computational chemistry scheme: (a) transforming sequences into RNA secondary structures, (b) defining and calculating new 2D-RNA-coupling numbers, (c) seek a structure-function model, and (d) map biological function onto the folded RNA. We studied as example 1-aminocyclopropane-1-carboxylic acid (ACC) oxidases known as ACO, which control fruit ripening having importance for biotechnology industry. First, we calculated tau(k)(2D-RNA) values to a set of 90-folded RNAs, including 28 transcripts of ACO and control sequences. Afterwards, we compared the classification performance of 10 different classifiers implemented in the software WEKA. In particular, the logistic equation ACO = 23.8 . tau(1)(2D-RNA) + 41.4 predicts ACOs with 98.9%, 98.0%, and 97.8% of accuracy in training, leave-one-out and 10-fold cross-validation, respectively. Afterwards, with this equation we predict ACO function to a sequence isolated in this work from Coffea arabica (GenBank accession DQ218452). The tau(1)(2D-RNA) also favorably compare with other descriptors. This equation allows us to map the codification of ACO activity on different mRNA topology features. The present computational-chemistry approach is general and could be extended to connect RNA secondary structure topology to other functions.

  10. Electronic structure of disordered CuPd alloys by positron-annihilation 2D-ACAR

    SciTech Connect

    Smedskjaer, L.C.; Benedek, R.; Siegel, R.W.; Legnini, D.G.; Stahulak, M.D.; Bansil, A.

    1988-01-01

    We report 2D-ACAR experiments and KKR CPA calculations on alpha-phase single-crystal Cu/sub 1-x/Pd/sub x/ in the range x less than or equal to 0.25. The flattening of the Fermi surface near (110) with increasing x predicted by theory is confirmed by our experimental results. 16 refs., 2 figs.

  11. Spectral and structural properties of 2D network complex [Ni(4,4'-bipyridine) 2(NCS) 2] n

    NASA Astrophysics Data System (ADS)

    Zhang, Y.; Jianmin, L.; Nishiura, M.; Imamoto, T.

    2000-02-01

    The complex [Ni(4,4'-bipyridine) 2(NCS) 2] n, in which nickel atoms are linked by two different Ni-4,4'-bpy-Ni assemblies to form two-dimensional distorted square net structure and the most effective packing of layers, has been isolated and structurally characterized. It represents the first example of Ni(II)-4,4'-bpy complex possesses 2D network. Crystal data for I: Fw=487.23, a=12.156(3), b=11.38(2), c=16.646(8) Å, β=100.43(3), V=2265(1) Å3, Z=4, space group=C2/c, T=298 K, λ((Mo-K α)=0.71070 Å, ρ calc=1.429 g cm -3, μ=10.62 cm-1, F(000)=1000, R=0.054, Rw=0.086, GOF=3.98. The UV-VIS absorption spectrum of the title complex is also reported and explained perfectly by the scaling radial theory which proposed by us. The strong and broad absorption bands occurred at 10433, 16830, 26556 cm -1, and they are assigned as d-d transitions of Ni(II) ion in octahedral field: 3A2g→ 3T2ga,b+ 3T2gc; 3A2g→ 3T1gz+ 3T1gy,x; 3A2g→ 3T1gz+ 3T1gy,x. The calculated results of the d-d transition energy levels agree well with the experimental values.

  12. Inhomogeneous 2D linear intergrowth structures among novel Y-Cu-Mg ternary compounds with yttrium/copper equiatomic ratio

    NASA Astrophysics Data System (ADS)

    Solokha, Pavlo; De Negri, Serena; Pavlyuk, Volodymyr; Saccone, Adriana

    2009-04-01

    Single crystals of the Y 5Cu 5Mg 8, Y 5Cu 5Mg 13, Y 5Cu 5Mg 16 and YCuMg 4 compounds were synthesized by heating in a resistance furnace evacuated quartz vials containing Ta-crucibles with element pieces. SEM-EDXS analyses were performed to check phases composition. The structures were refined from X-ray single crystal diffraction data. Y 5Cu 5Mg 8, Y 5Cu 5Mg 13 and Y 5Cu 5Mg 16 represent new structure types: Y 5Cu 5Mg 8 - orthorhombic, Pmma, oP36, a = 2.63723(15), b = 0.40066(2), c = 0.74115(6) nm, Z = 2, wR2 = 0.0597, 939 F2 values, 60 variables; Y 5Cu 5Mg 13 - orthorhombic, Cmcm, oS92, a = 0.40973(2), b = 1.92794(8), c = 2.57907(11) nm, Z = 4, wR2 = 0.1134, 1208 F2 values, 75 variables; Y 5Cu 5Mg 16 - orthorhombic, Cmcm, oS104, a = 0.41360(8), b = 1.9239(4), c = 2.9086(6) nm, Z = 4, wR2 = 0.0760, 1383 F2 values, 84 variables. YCuMg 4 crystallizes in the TbCuMg 4 structure type ( Cmmm, oS48, a = 1.35754(4), b = 2.03153(6), c = 0.39060(1) nm, Z = 8, wR2 = 0.0401, 661 F2 values, 45 variables). The crystal chemistry of these two-layer structures is comparatively discussed. Majority of novel compounds were characterized as members of inhomogeneous 2D intergrowth structure series of R 5M 5X 5, X 4 (Mg 4) and empty Mg octahedra building blocks of general formula R 5 kM 5 kX 5 k + 4 l + m. The common pentagonal prism derivative structural fragments around the most electropositive yttrium atoms were outlined in all these intermetallics.

  13. Self-assembly of 2D sandwich-structured MnFe{sub 2}O{sub 4}/graphene composites for high-performance lithium storage

    SciTech Connect

    Li, Songmei Wang, Bo; Li, Bin; Liu, Jianhua; Yu, Mei; Wu, Xiaoyu

    2015-01-15

    Highlights: • MFO/GN composites were synthesized by a facile in situ solvothermal approach. • The MFO microspheres are sandwiched between the graphene layers. • Each MFO microsphere is an interstitial cluster of nanoparticles. • The MFO/GN electrode exhibits an enhanced cyclability for Li-ion batteries anodes. - Abstract: In this study, two-dimensional (2D) sandwich-structured MnFe{sub 2}O{sub 4}/graphene (MFO/GN) composites are synthesized by a facile in situ solvothermal approach, using cetyltrimethylammonium bromide (CTAB) as cationic surfactant. As a consequence, the nanocomposites of MFO/GN self-assembled into a 2D sandwich structure, in which the interstitial cluster structure of microsphere-type MnFe{sub 2}O{sub 4} is sandwiched between the graphene layers. This special structure of the MFO/GN composites used as anodes for lithium-ion batteries will be favorable for the maximum accessible surface of electroactive materials, fast diffusion of lithium ions and migration of electron, and elastomeric space to accommodate volume changes during the discharge–charge processes. The as-synthesized MFO/GN composites deliver a high specific reversible capacity of 987.95 mA h g{sup −1} at a current density of 200 mA g{sup −1}, a good capacity retention of 69.27% after 80 cycles and excellent rate performance for lithium storage.

  14. Buffer layer for thin film structures

    SciTech Connect

    Foltyn, Stephen R.; Jia, Quanxi; Arendt, Paul N.; Wang, Haiyan

    2010-06-15

    A composite structure including a base substrate and a layer of a mixture of strontium titanate and strontium ruthenate is provided. A superconducting article can include a composite structure including an outermost layer of magnesium oxide, a buffer layer of strontium titanate or a mixture of strontium titanate and strontium ruthenate and a top-layer of a superconducting material such as YBCO upon the buffer layer.

  15. Buffer layer for thin film structures

    DOEpatents

    Foltyn, Stephen R.; Jia, Quanxi; Arendt, Paul N.; Wang, Haiyan

    2006-10-31

    A composite structure including a base substrate and a layer of a mixture of strontium titanate and strontium ruthenate is provided. A superconducting article can include a composite structure including an outermost layer of magnesium oxide, a buffer layer of strontium titanate or a mixture of strontium titanate and strontium ruthenate and a top-layer of a superconducting material such as YBCO upon the buffer layer.

  16. Solution-processed 2D niobium diselenide nanosheets as efficient hole-transport layers in organic solar cells.

    PubMed

    Gu, Xing; Cui, Wei; Song, Tao; Liu, Changhai; Shi, Xiaoze; Wang, Suidong; Sun, Baoquan

    2014-02-01

    Thin-layer, two-dimensional NbSe2 nanosheets with lower trap density have been obtained and act as an alternative hole-transporting layer to replace MoO3 in organic solar cells. If poly({4,8-bis[(2-ethylhexyl)oxy]benzo[1,2-b:4,5-b']dithiophene-2,6-diyl}{3-fluoro-2-[(2-ethylhexyl)carbonyl]thieno[3,4-b]thiophenediyl}):[6,6]-phenyl-C71-butyric acid methyl ester acts as an active layer, a power conversion efficiency of 8.10 % has been achieved without any further thermal treatment. The properties of this hole-transporting layer were investigated and the improvements in the devices are discussed.

  17. Fundamental Studies on Confinement Effects in Ionic Conduction and Inversion Layers in 2-D Single Crystal Free Standing Oxide Membranes

    DTIC Science & Technology

    2014-02-14

    hysteresis in a model system vanadium dioxide. Electric double layer transistors are then fabricated with the membranes and compared to thin film devices... vanadium dioxide. Electric double layer transistors are then fabricated with the membranes and compared to thin film devices. The ionic liquid...02/14/2014 Received Paper 1.00 2.00 4.00 J. Sim, Y. Zhou, S. Ramanathan. Suspended sub-50 nm vanadium dioxide membrane transistors: fabricationand

  18. Upper Crustal Structure of the Cleft Segment of the Juan de Fuca Ridge using 2D Streamer travel time tomography

    NASA Astrophysics Data System (ADS)

    Ghosh, S.; Canales, J.; Carbotte, S. M.; Nedimovic, M. R.

    2009-12-01

    We use long off-set (6 km) multichannel seismic reflection data to obtain the P-wave seismic structure of the upper ~2 km of the crust along the southern part of the intermediate-spreading Juan de Fuca Ridge (Cleft segment). Along this segment, the top of the Axial Magma Chamber (AMC) deepens from south to north from about 2.0 km at the southern end of the segment to about 2.3 km at the northern end. Both segment ends are characterized by high-temperature hydrothermal venting. Our objective is to study the effects of high temperature hydrothermal circulation on the seismic structure of the shallow crust. We jointly inverted refracted and reflected travel times (from the top of the AMC) to obtain the 2 dimensional velocity structure of the earth along ~60 km of the ridge axis. Prior to tomographic inversion, processing of marine seismic data included trace editing, trapezoidal band pass filtering (3-5-15-30 Hz), formation of partial off-set stacks of 5 shots (i.e, supershots) to increase the signal to noise ratio and downward continuation of the wavefield to a datum just above the sea floor (i.e, phase shift in the frequency-wave number domain of both source and receiver gathers to extract travel time information from refracted arrivals at near offset. Traveltime picking of the arrivals was done using a semi automated first break routine. The picked travel times of the first refracted arrivals and the reflected arrivals from the AMC are then input into a tomography inversion algorithm to build a 2D velocity model. Our results do not show detectable velocity variations associated with the presence of active high-temperature hydrothermal discharge, probably because the length scale of hydrothermal alteration is smaller than the resolving power of traveltime tomography. However our results are a first step towards higher-resolution seismic imaging models using waveform inversion. We will also present results from off-axis data to understand the early evolution of the

  19. 2D THD and 3D TEHD analysis of large spindle supported thrust bearings with pins and double layer system used in the three gorges hydroelectric generators

    NASA Astrophysics Data System (ADS)

    Huang, B.; Wu, Z. D.; Wu, J. L.; Wang, L. Q.

    2012-11-01

    A 2D THD model and a 3DTEHD model for large spindle supported thrust bearings were set up and used to analyze the lubrication performance of the Three Gorges test thrust beating withpins and double layer system developed by Alstom Power. The finite difference method was employed to solve the THD model, and the thermal-elasticdeformations in the pad and runner were obtained by the finite element software ANSYS11.0. The data transfer between the THD model and ANSYS11.0 was carried out automatically by an interface program.A detailed comparison between the experimental results and numerical predictions by the two different modelsset up in this paper was carried out. Poor agreement has been found between the theoretical results obtained by 2D THD model and experimental data, while 3D TEHD provides fairly good agreement, confirming the importance of thermal effects and thermal-elastic deformations in both pad and runner.

  20. Study on molecular structure and hydration mechanism of Domyoji-ko starch by IR and NIR hetero 2D analysis

    NASA Astrophysics Data System (ADS)

    Katayama, Norihisa; Kondo, Miyuki; Miyazawa, Mitsuhiro

    2010-06-01

    The hydration structure of starch molecule in Domyoji-ko, which is made from gluey rice, was investigated by hetero 2D correlation analysis of IR and NIR spectroscopy. The feature near 1020 cm -1 in the IR spectra of Domyoji-ko is changed by rehydration process, indicating that the molecular structure of amylopectin in the starch has been varied by the hydration without heating. The intensity of a band at 4770 cm -1 in NIR spectra is decreasing with the increasing of either the heating time with water or rehydration time without heating. These results suggest that the hydration of Domyoji-ko has proceeded in similar mechanisms on these processes. The generalized hetero 2D IR-NIR correlation analysis for rehydration of Domyoji-ko has supported the assignments for NIR bands concerning the gelatinization of starch.

  1. 2-D modelling of the anticlinal structures and structural development of the eastern fold belt of the Bengal Basin, Bangladesh

    NASA Astrophysics Data System (ADS)

    Sikder, Arif Mohiuddin; Alam, M. Mustafa

    2003-02-01

    Structural architecture of the Bengal Basin has been strongly controlled by the collision pattern of the Indian plate with the Burma and Tibetan plates. The eastern fold belt (EFB) of the basin, comprising a series of north-south-trending curvilinear anticlines and synclines, represents a fold-and-thrust belt that constitutes the westward continuation of Arakan-Chin fold system of the Indo-Burman Ranges. The present study is mainly concerned with the 2-D modelling of the anticlinal structures in order to develop an understanding about the process-response relationships between the structural style and tectonic evolution of the eastern fold belt. The dominant fold-generating mechanism is believed to be the east-west-directed compressional force arising from oblique subduction of the Indian plate beneath the Burma plate that resulted in the growth of fault-propagation folds above a detachment or decollement at depth, giving rise to the Neogene accretionary prism complex development. A prominent feature of the region is the major east-dipping thrusts separating successive accretionary wedges. In seismic sections, evidence for several phases of compressional deformation suggests that multiphase stress conditions were responsible for the structural expression of the fold belt. Deep seismic sections reveal that the base of folding is characterized by a low-interval velocity horizon that represents a detachment separating the upper folded zone from the lower, seismically coherent, nearly unfolded zone. This detachment coincides with the undercompacted pressured shale unit, which is thought to have played an important role in the structural development of the eastern fold belt. Clay mineralogical analysis reveals the presence of a low-density shale horizon within the dense and thick shale sequence that is thought to be an undercompacted pressured shale during the geological past, and was responsible for the initiation of decollement and incipient diapirism involving thin

  2. Watching Silica's Dance: Imaging the Structure and Dynamics of the Atomic (Re-) Arrangements in 2D Glass

    NASA Astrophysics Data System (ADS)

    Muller, David

    2014-03-01

    Even though glasses are almost ubiquitous--in our windows, on our iPhones, even on our faces--they are also mysterious. Because glasses are notoriously difficult to study, basic questions like: ``How are the atoms arranged? Where and how do glasses break?'' are still under contention. We use aberration corrected transmission electron microscopy (TEM) to image the atoms in a new two-dimensional phase of silica glass - freestanding it becomes the world's thinnest pane of glass at only 3-atoms thick, and take a unique look into these questions. Using atom-by-atom imaging and spectroscopy, we are able to reconstruct the full structure and bonding of this 2D glass and identify it as a bi-tetrahedral layer of SiO2. Our images also strikingly resemble Zachariasen's original cartoon models of glasses, drawn in 1932. As such, our work realizes an 80-year-old vision for easily understandable glassy systems and introduces promising methods to test theoretical predictions against experimental data. We image atoms in the disordered solid and track their motions in response to local strain. We directly obtain ring statistics and pair distribution functions that span short-, medium-, and long-range order, and test these against long-standing theoretical predictions of glass structure and dynamics. We use the electron beam to excite atomic rearrangements, producing surprisingly rich and beautiful videos of how a glass bends and breaks, as well as the exchange of atoms at a solid/liquid interface. Detailed analyses of these videos reveal a complex dance of elastic and plastic deformations, phase transitions, and their interplay. These examples illustrate the wide-ranging and fundamental materials physics that can now be studied at atomic-resolution via transmission electron microscopy of two-dimensional glasses. Work in collaboration with: S. Kurasch, U. Kaiser, R. Hovden, Q. Mao, J. Kotakoski, J. S. Alden, A. Shekhawat, A. A. Alemi, J. P. Sethna, P. L. McEuen, A.V. Krasheninnikov

  3. Integral equation analysis and optimization of 2D layered nanolithography masks by complex images Green's function technique in TM polarization.

    PubMed

    Haghtalab, Mohammad; Faraji-Dana, Reza

    2012-05-01

    Analysis and optimization of diffraction effects in nanolithography through multilayered media with a fast and accurate field-theoretical approach is presented. The scattered field through an arbitrary two-dimensional (2D) mask pattern in multilayered media illuminated by a TM-polarized incident wave is determined by using an electric field integral equation formulation. In this formulation the electric field is represented in terms of complex images Green's functions. The method of moments is then employed to solve the resulting integral equation. In this way an accurate and computationally efficient approximate method is achieved. The accuracy of the proposed method is vindicated through comparison with direct numerical integration results. Moreover, the comparison is made between the results obtained by the proposed method and those obtained by the full-wave finite-element method. The ray tracing method is combined with the proposed method to describe the imaging process in the lithography. The simulated annealing algorithm is then employed to solve the inverse problem, i.e., to design an optimized mask pattern to improve the resolution. Two binary mask patterns under normal incident coherent illumination are designed by this method, where it is shown that the subresolution features improve the critical dimension significantly.

  4. Strained layer superlattice focal plane array having a planar structure

    DOEpatents

    Kim, Jin K; Carroll, Malcolm S; Gin, Aaron; Marsh, Phillip F; Young, Erik W; Cich, Michael J

    2012-10-23

    An infrared focal plane array (FPA) is disclosed which utilizes a strained-layer superlattice (SLS) formed of alternating layers of InAs and In.sub.xGa.sub.1-xSb with 0.ltoreq.x.ltoreq.0.5 epitaxially grown on a GaSb substrate. The FPA avoids the use of a mesa structure to isolate each photodetector element and instead uses impurity-doped regions formed in or about each photodetector for electrical isolation. This results in a substantially-planar structure in which the SLS is unbroken across the entire width of a 2-D array of the photodetector elements which are capped with an epitaxially-grown passivation layer to reduce or eliminate surface recombination. The FPA has applications for use in the wavelength range of 3-25 .mu.m.

  5. Uncertainty Assessments of 2D and Axisymmetric Hypersonic Shock Wave - Turbulent Boundary Layer Interaction Simulations at Compression Corners

    NASA Technical Reports Server (NTRS)

    Gnoffo, Peter A.; Berry, Scott A.; VanNorman, John W.

    2011-01-01

    This paper is one of a series of five papers in a special session organized by the NASA Fundamental Aeronautics Program that addresses uncertainty assessments for CFD simulations in hypersonic flow. Simulations of a shock emanating from a compression corner and interacting with a fully developed turbulent boundary layer are evaluated herein. Mission relevant conditions at Mach 7 and Mach 14 are defined for a pre-compression ramp of a scramjet powered vehicle. Three compression angles are defined, the smallest to avoid separation losses and the largest to force a separated flow engaging more complicated flow physics. The Baldwin-Lomax and the Cebeci-Smith algebraic models, the one-equation Spalart-Allmaras model with the Catrix-Aupoix compressibility modification and two-equation models including Menter SST, Wilcox k-omega 98, and Wilcox k-omega 06 turbulence models are evaluated. Each model is fully defined herein to preclude any ambiguity regarding model implementation. Comparisons are made to existing experimental data and Van Driest theory to provide preliminary assessment of model form uncertainty. A set of coarse grained uncertainty metrics are defined to capture essential differences among turbulence models. Except for the inability of algebraic models to converge for some separated flows there is no clearly superior model as judged by these metrics. A preliminary metric for the numerical component of uncertainty in shock-turbulent-boundary-layer interactions at compression corners sufficiently steep to cause separation is defined as 55%. This value is a median of differences with experimental data averaged for peak pressure and heating and for extent of separation captured in new, grid-converged solutions presented here. This value is consistent with existing results in a literature review of hypersonic shock-turbulent-boundary-layer interactions by Roy and Blottner and with more recent computations of MacLean.

  6. 2D-ordered dielectric sub-micron bowls on a metal surface: a useful hybrid plasmonic-photonic structure

    NASA Astrophysics Data System (ADS)

    Lan, Yue; Wang, Shiqiang; Yin, Xianpeng; Liang, Yun; Dong, Hao; Gao, Ning; Li, Jian; Wang, Hui; Li, Guangtao

    2016-07-01

    Recently, it has been demonstrated that the combination of periodic dielectric structures with metallic structures provides an efficient means to yield a synergetic optical response or functionality in the resultant hybrid plasmonic-photonic systems. In this work, a new hybrid plasmonic-photonic structure of 2D-ordered dielectric sub-micron bowls on a flat gold surface was proposed, prepared, and theoretically and experimentally characterized. This hybrid structure supports two types of modes: surface plasmon polaritons bound at the metallic surface and waveguided mode of light confined in the cavity of bowls. Optical responses of this hybrid structure as well as the spatial electric field distribution of each mode are found to be strongly dependent on the structural parameters of this system, and thus could be widely modified on demand. Importantly, compared to the widely studied hybrid systems, namely the flat metallic surface coated with a monolayer array of latex spheres, the waveguided mode with strong field enhancement appearing in the cavities of bowls is more facilely accessible and thus suitable for practical use. For demonstration, a 2D-ordered silica sub-micron bowl array deposited on a flat gold surface was fabricated and used as a regenerable platform for fluorescence enhancement by simply accommodating emitters in bowls. All the simulation and experiment results indicate that the 2D-ordered dielectric sub-micron bowls on a metal surface should be a useful hybrid plasmonic-photonic system with great potential for applications such as sensors or tunable emitting devices if appropriate periods and materials are employed.Recently, it has been demonstrated that the combination of periodic dielectric structures with metallic structures provides an efficient means to yield a synergetic optical response or functionality in the resultant hybrid plasmonic-photonic systems. In this work, a new hybrid plasmonic-photonic structure of 2D-ordered dielectric sub

  7. Exclusion of quantum coherence as the origin of the 2D metallic state in high-mobility silicon inversion layers.

    PubMed

    Brunthaler, G; Prinz, A; Bauer, G; Pudalov, V M

    2001-08-27

    The temperature and density dependence of the phase coherence time tau(phi) in high-mobility silicon inversion layers was determined from the magnetoresistivity due to weak localization. The upper temperature limit for single-electron quantum interference effects was delineated by comparing tau(phi) with the momentum relaxation time tau. A comparison between the density dependence of the borders for quantum interference effects and the strong resistivity drop reveals that these effects are not related to each other. As the strong resistivity drop occurs in the Drude regime, the apparent metallic behavior cannot be caused by quantum coherent effects.

  8. An analysis of electrochemical energy storage using electrodes fabricated from atomically thin 2D structures of MoS2, graphene and MoS2/graphene composites

    NASA Astrophysics Data System (ADS)

    Huffstutler, Jacob D.

    The behavior of 2D materials has become of great interest in the wake of development of electrochemical double-layer capacitors (EDLCs) and the discovery of monolayer graphene by Geim and Novoselov. This study aims to analyze the response variance of 2D electrode materials for EDLCs prepared through the liquid-phase exfoliation method when subjected to differing conditions. Once exfoliated, samples are tested with a series of structural characterization methods, including tunneling electron microscopy, atomic force microscopy, Raman spectroscopy, and x-ray photoelectron spectroscopy. A new ionic liquid for EDLC use, 1-butyl-1-methylpyrrolidinium tris(pentafluoroethyl)trifluorophosphate is compared in performance to 6M potassium hydroxide aqueous electrolyte. Devices composed of liquid-phase exfoliated graphene / MoS2 composites are analyzed by concentration for ideal performance. Device performance under cold extreme temperatures for the ionic fluid is presented as well. A brief overview of by-layer analysis of graphene electrode materials is presented as-is. All samples were tested with cyclic voltammetry, galvanostatic charge-discharge, and electrochemical impedance spectroscopy, with good capacitive results. The evolution of electrochemical behavior through the altered parameters is tracked as well.

  9. Residual resistance of 2D and 3D structures and Joule heat release.

    PubMed

    Gurevich, V L; Kozub, V I

    2011-06-22

    We consider a residual resistance and Joule heat release in 2D nanostructures as well as in ordinary 3D conductors. We assume that elastic scattering of conduction electrons by lattice defects is predominant. Within a rather intricate situation in such systems we discuss in detail two cases. (1) The elastic scattering alone (i.e. without regard of inelastic mechanisms of scattering) leads to a transition of the mechanical energy (stored by the electrons under the action of an electric field) into heat in a traditional way. This process can be described by the Boltzmann equation where it is possible to do the configuration averaging over defect positions in the electron-impurity collision term. The corresponding conditions are usually met in metals. (2) The elastic scattering can be considered with the help of the standard electron-impurity collision integral only in combination with some additional averaging procedure (possibly including inelastic scattering or some mechanisms of electron wavefunction phase destruction). This situation is typical for degenerate semiconductors with a high concentration of dopants and conduction electrons. Quite often, heat release can be observed via transfer of heat to the lattice, i.e. via inelastic processes of electron-phonon collisions and can take place at distances much larger than the size of the device. However, a direct heating of the electron system can be registered too by, for instance, local measurements of the current noise or direct measurement of an electron distribution function.

  10. A Comparison of the Performance of 2D Square and Rectangular Dielectric Vein Structures

    DTIC Science & Technology

    2012-09-27

    dielectric vein structure to approximate these photonic crystals. In this case, the numerical model is improved. A rectangular vein structure is...square dielectric vein structure to approximate these photonic crystals. In this case, the numerical model is improved. A rectangular vein...34 REFERENCES 1. Kawano, K. and Kitoh, T., Introduction to Optical Waveguide Analysis : Solving Maxwell’s Equations and the Schrödinger

  11. Prediction of Silicon-Based Layered Structures for Optoelectronic Applications

    NASA Astrophysics Data System (ADS)

    Luo, Wei; Ma, Yanming; Gong, Xingao; Xiang, Hongjun; CCMG Team

    2015-03-01

    A method based on the particle swarm optimization (PSO) algorithm is presented to design quasi-two-dimensional (Q2D) materials. With this development, various single-layer and bi-layer materials in C, Si, Ge, Sn, and Pb were predicted. A new Si bi-layer structure is found to have a much-favored energy than the previously widely accepted configuration. Both single-layer and bi-layer Si materials have small band gaps, limiting their usages in optoelectronic applications. Hydrogenation has therefore been used to tune the electronic and optical properties of Si layers. We discover two hydrogenated materials of layered Si8H2andSi6H2 possessing quasi-direct band gaps of 0.75 eV and 1.59 eV, respectively. Their potential applications for light emitting diode and photovoltaics are proposed and discussed. Our study opened up the possibility of hydrogenated Si layered materials as next-generation optoelectronic devices.

  12. An algorithm for computing the 2D structure of fast rotating stars

    SciTech Connect

    Rieutord, Michel; Espinosa Lara, Francisco; Putigny, Bertrand

    2016-08-01

    Stars may be understood as self-gravitating masses of a compressible fluid whose radiative cooling is compensated by nuclear reactions or gravitational contraction. The understanding of their time evolution requires the use of detailed models that account for a complex microphysics including that of opacities, equation of state and nuclear reactions. The present stellar models are essentially one-dimensional, namely spherically symmetric. However, the interpretation of recent data like the surface abundances of elements or the distribution of internal rotation have reached the limits of validity of one-dimensional models because of their very simplified representation of large-scale fluid flows. In this article, we describe the ESTER code, which is the first code able to compute in a consistent way a two-dimensional model of a fast rotating star including its large-scale flows. Compared to classical 1D stellar evolution codes, many numerical innovations have been introduced to deal with this complex problem. First, the spectral discretization based on spherical harmonics and Chebyshev polynomials is used to represent the 2D axisymmetric fields. A nonlinear mapping maps the spheroidal star and allows a smooth spectral representation of the fields. The properties of Picard and Newton iterations for solving the nonlinear partial differential equations of the problem are discussed. It turns out that the Picard scheme is efficient on the computation of the simple polytropic stars, but Newton algorithm is unsurpassed when stellar models include complex microphysics. Finally, we discuss the numerical efficiency of our solver of Newton iterations. This linear solver combines the iterative Conjugate Gradient Squared algorithm together with an LU-factorization serving as a preconditioner of the Jacobian matrix.

  13. On Parametric Sensitivity of Reynolds-Averaged Navier-Stokes SST Turbulence Model: 2D Hypersonic Shock-Wave Boundary Layer Interactions

    NASA Technical Reports Server (NTRS)

    Brown, James L.

    2014-01-01

    Examined is sensitivity of separation extent, wall pressure and heating to variation of primary input flow parameters, such as Mach and Reynolds numbers and shock strength, for 2D and Axisymmetric Hypersonic Shock Wave Turbulent Boundary Layer interactions obtained by Navier-Stokes methods using the SST turbulence model. Baseline parametric sensitivity response is provided in part by comparison with vetted experiments, and in part through updated correlations based on free interaction theory concepts. A recent database compilation of hypersonic 2D shock-wave/turbulent boundary layer experiments extensively used in a prior related uncertainty analysis provides the foundation for this updated correlation approach, as well as for more conventional validation. The primary CFD method for this work is DPLR, one of NASA's real-gas aerothermodynamic production RANS codes. Comparisons are also made with CFL3D, one of NASA's mature perfect-gas RANS codes. Deficiencies in predicted separation response of RANS/SST solutions to parametric variations of test conditions are summarized, along with recommendations as to future turbulence approach.

  14. Analysis of simple 2-D and 3-D metal structures subjected to fragment impact

    NASA Technical Reports Server (NTRS)

    Witmer, E. A.; Stagliano, T. R.; Spilker, R. L.; Rodal, J. J. A.

    1977-01-01

    Theoretical methods were developed for predicting the large-deflection elastic-plastic transient structural responses of metal containment or deflector (C/D) structures to cope with rotor burst fragment impact attack. For two-dimensional C/D structures both, finite element and finite difference analysis methods were employed to analyze structural response produced by either prescribed transient loads or fragment impact. For the latter category, two time-wise step-by-step analysis procedures were devised to predict the structural responses resulting from a succession of fragment impacts: the collision force method (CFM) which utilizes an approximate prediction of the force applied to the attacked structure during fragment impact, and the collision imparted velocity method (CIVM) in which the impact-induced velocity increment acquired by a region of the impacted structure near the impact point is computed. The merits and limitations of these approaches are discussed. For the analysis of 3-d responses of C/D structures, only the CIVM approach was investigated.

  15. Exploring group 14 structures: 1D to 2D to 3D.

    PubMed

    Wen, Xiao-Dong; Cahill, Thomas J; Hoffmann, Roald

    2010-06-11

    Various one-, two- and three-dimensional Group 14 (C, Si, Ge, Sn, and Pb) element structures at P = 1 atm are studied in this work. As expected, coordination number (CN)--not an unambiguous concept for extended structures--plays an important part in the stability of structures. Carbon not only favors four-coordination, but also is quite happy with pi-bonding, allowing three- and even two-coordination to compete. Highly coordinated (CN > 4) discrete carbon molecules are rare; that "saturation of valence" is reflected in the instability of C extended structures with CN > 4. Si and Ge are quite similar to each other in their preferences. They are less biased in their coordination than C, allowing (as their molecular structures do) CN = 5 and 6, but tending towards four-coordination. Sn and Pb 3D structures are very flexible in their bonding, so that in these elements four- to twelve-coordinate structures are close in energy. This lack of discrimination among ordered structures also points to an approach to the liquid state, consistent with the low melting point of Sn and Pb. The Group 14 liquid structures we simulate in molecular dynamics calculations show the expected, effective, first coordination number increase from 5.1 for Si to 10.4 for Pb. A special point of interest emerging from our study is the instability of potential multilayer graphene structures down Group 14. Only for C will these be stable; for all the other Group 14 elements pristine, unprotected, bi- and multilayer graphenes should collapse, forming "vertical" bonds as short as the in-plane ones.

  16. Visualizing Evaluation Structures using Layered Graph Drawings.

    PubMed

    Onoue, Yosuke; Kukimoto, Nobuyuki; Sakamoto, Naohisa; Misue, Kazuo; Koyamada, Koji

    2016-03-18

    We propose a method for visualizing evaluation structures that is based on layered graph drawing techniques. An evaluation structure is a hierarchical structure of human cognition extracted from interviews based on the evaluation grid method. An evaluation structure can be defined as a directed acyclic graph (DAG). The Sugiyama framework is a popular method for constructing DAGs. A new layer assignment method that is a part of the Sugiyama framework is proposed to satisfy the requirements for drawing evaluation structures. We formulate a layer assignment problem by considering the sum of squares of arc lengths to be an integer quadratic programming (IQP) problem. Moreover, we transform the IQP problem into an equivalent integer linear programming (ILP) problem for computational efficiency. Evaluations demonstrate that the layered graph drawing with the proposed layer assignment method is preferred by users and aids in the understanding of evaluation structures.

  17. 2-D Joint Structural Inversion of Cross-hole Electrical Resistance and Ground Penetrating Radar Data

    NASA Astrophysics Data System (ADS)

    Bouchedda, Abderrezak; Chouteau, Michel; Giroux, Bernard

    2010-05-01

    We present a joint structural inversion algorithm for cross-hole electrical resistance tomography (ERT) and cross-hole radar travel time tomography (RTT). The algorithm proceeds by combining the exchange of structural information and a regularization method that consists of imposing an L1-norm penalty in the wavelet domain. The minimization of the L1-norm penalty is carried out using an iterative soft-thresholding algorithm. The thresholds are estimated by maximizing a structural similarity criterion, which is a function of the two (ERT and RTT) inverted models. To solve this optimization subproblem, we used the simultaneous perturbation stochastic approach. Besides, the regularization in the wavelet basis allows for the possibility of sharp discontinuities superimposed on a smoothly varying background. Hence the structural information is extracted from each model using a Canny edge detector. The detected edge is used to construct a weighting matrix that is applied to alter the smoothness matrix constraint. To validate our methodology and its implementation, responses from two models were modelled. Experiments demonstrate that the proposed approach improves the spatial resolution and quantitative estimation of physical parameters. In addition, in comparison with joint structural inversion with only the exchange of structural information, our method avoids undesirable bias introduced by the exchange of structural information when the boundaries are near each other. Finally, the proposed algorithm will be applied to real data in the near future to evaluate its performance.

  18. Modeling and characterization of 2-D and 3-D textile structural composites

    SciTech Connect

    Yang, J.M.

    1986-01-01

    This dissertation studies the analytical modeling and experimental characterization of various two-dimensional and three-dimensional textile structure composites. In the analytical approach, various theoretical models were established to predict the stiffness, strength, nonlinear deformation, and failure behavior of triaxial woven-fabric composites, 3-D braided composites, and multilayer multidirectional warp knit fabric composites in polymer and metal matrices. The structure performance maps of various textile structural composites were also established, based upon these analytical methods. In the experimental approach, extensive mechanical testing and microstructural characterization were performed to investigate the thermomechanical properties and failure behavior of 3-D braided FP/Al composites. Results of this research will serve as the basis for assessing the potential of textile composites for structural applications.

  19. 2D and 3D reconstruction and geomechanical characterization of kilometre-scale complex folded structures

    NASA Astrophysics Data System (ADS)

    Zanchi, Andrea; Agliardi, Federico; Crosta, Giovanni B.; Villa, Alberto; Bistacchi, Andrea; Iudica, Gaetano

    2015-04-01

    The geometrical, structural and geomechanical characterization of large-scale folded structures in sedimentary rocks is an important issue for different geological and geo-hazard applications (e.g. hydrocarbon and geothermal reservoir exploitation, natural rock slope stability, mining, and tunnelling). Fold geometry controls topography and the spatial distribution of rock types with different strength and permeability. Fold-related fracture systems condition the fracture intensity, degree of freedom, and overall strength of rock masses. Nevertheless, scale issues and limited accessibility or partial exposure of structures often hamper a complete characterization of these complex structures. During the last years, advances in remote survey techniques as terrestrial Lidar (TLS) allowed significant improvements in the geometrical and geological characterization of large or inaccessible outcrops. However, sound methods relating structures to rock mass geomechanical properties are yet to be developed. Here we present results obtained by integrating remote survey and field assessment techniques to characterize a folded sedimentary succession exposed in unreachable vertical rock walls. The study area is located in the frontal part of the Southern Alps near Bergamo, Italy. We analysed large-scale detachment folds developed in the Upper Triassic sedimentary cover in the Zu Limestone. Folds are parallel and disharmonic, with regular wavelengths and amplitudes of about 200-250 m. We used a Riegl VZ-1000 long-range laser scanner to obtain points clouds with nominal spacings between 5 cm and 20 cm from 9 scan positions characterized by range between 350 m and 1300 m. We fixed shadowing and occlusion effects related to fold structure exposure by filling point clouds with data collected by terrestrial digital photogrammetry (TDP). In addition, we carried out field surveys of fold-related brittle structures and their geomechanical attributes at key locations. We classified cloud

  20. New coordination polymers from 1D chain, 2D layer to 3D framework constructed from 1,2-phenylenediacetic acid and 1,3-bis(4-pyridyl)propane flexible ligands

    SciTech Connect

    Xin Lingyun; Liu Guangzhen; Wang Liya

    2011-06-15

    The hydrothermal reactions of Cd, Zn, or Cu(II) acetate salts with H{sub 2}PHDA and BPP flexible ligands afford three new coordination polymers, including [Cd(PHDA)(BPP)(H{sub 2}O)]{sub n}(1), [Zn(PHDA)(BPP)]{sub n}(2), and [Cu{sub 2}(PHDA){sub 2}(BPP)]{sub n}(3) (H{sub 2}PHDA=1,2-phenylenediacetic acid, BPP=1,3-bis(4-pyridyl)propane). The single-crystal X-ray diffractions reveal that all three complexes feature various metal carboxylate subunits extended further by the BPP ligands to form a diverse range of structures, displaying a remarked structural sensitivity to metal(II) cation. Complex 1 containing PHDA-bridged binuclear cadmium generates 1D double-stranded chain, complex 2 results in 2D{yields}2D interpenetrated (4,4) grids, and complex 3 displays a 3D self-penetrated framework with 4{sup 8}6{sup 6}8 rob topology. In addition, fluorescent analyses show that both 1 and 2 exhibit intense blue-violet photoluminescence in the solid state. - Graphical Abstract: We show diverse supramolecular frameworks based on the same ligands (PHDA and BPP) and different metal acetate salts including 1D double-stranded chain, 2D {yields} 2D twofold interpenetrated layer, and 3D self-penetration networks. Highlights: > Three metal(II = 2 /* ROMAN ) coordination polymers were synthesized using H{sub 2}PHDA and BPP. > The diversity of structures show a remarked sensitivity to metal(II) center. > Complexes show the enhancement of fluorescence compared to that of free ligand.

  1. Learning the 3-D structure of objects from 2-D views depends on shape, not format

    PubMed Central

    Tian, Moqian; Yamins, Daniel; Grill-Spector, Kalanit

    2016-01-01

    Humans can learn to recognize new objects just from observing example views. However, it is unknown what structural information enables this learning. To address this question, we manipulated the amount of structural information given to subjects during unsupervised learning by varying the format of the trained views. We then tested how format affected participants' ability to discriminate similar objects across views that were rotated 90° apart. We found that, after training, participants' performance increased and generalized to new views in the same format. Surprisingly, the improvement was similar across line drawings, shape from shading, and shape from shading + stereo even though the latter two formats provide richer depth information compared to line drawings. In contrast, participants' improvement was significantly lower when training used silhouettes, suggesting that silhouettes do not have enough information to generate a robust 3-D structure. To test whether the learned object representations were format-specific or format-invariant, we examined if learning novel objects from example views transfers across formats. We found that learning objects from example line drawings transferred to shape from shading and vice versa. These results have important implications for theories of object recognition because they suggest that (a) learning the 3-D structure of objects does not require rich structural cues during training as long as shape information of internal and external features is provided and (b) learning generates shape-based object representations independent of the training format. PMID:27153196

  2. Ferromagnetic GaAs structures with single Mn delta-layer fabricated using laser deposition.

    PubMed

    Danilov, Yuri A; Vikhrova, Olga V; Kudrin, Alexey V; Zvonkov, Boris N

    2012-06-01

    The new technique combining metal-organic chemical vapor epitaxy with laser ablation of solid targets was used for fabrication of ferromagnetic GaAs structures with single Mn delta-doped layer. The structures demonstrated anomalous Hall effect, planar Hall effect, negative and anisotropic magnetoresistance in temperature range of 10-35 K. In GaAs structures with only single Mn delta-layer (without additional 2D hole gas channel or quantum well) ferromagnetism was observed for the first time.

  3. Fringe structures and tunable bandgap width of 2D boron nitride nanosheets.

    PubMed

    Feng, Peter; Sajjad, Muhammad; Li, Eric Yiming; Zhang, Hongxin; Chu, Jin; Aldalbahi, Ali; Morell, Gerardo

    2014-01-01

    We report studies of the surface fringe structures and tunable bandgap width of atomic-thin boron nitride nanosheets (BNNSs). BNNSs are synthesized by using digitally controlled pulse deposition techniques. The nanoscale morphologies of BNNSs are characterized by using scanning electron microscope (SEM), and transmission electron microscopy (TEM). In general, the BNNSs appear microscopically flat in the case of low temperature synthesis, whereas at high temperature conditions, it yields various curved structures. Experimental data reveal the evolutions of fringe structures. Functionalization of the BNNSs is completed with hydrogen plasma beam source in order to efficiently control bandgap width. The characterizations are based on Raman scattering spectroscopy, X-ray diffraction (XRD), and FTIR transmittance spectra. Red shifts of spectral lines are clearly visible after the functionalization, indicating the bandgap width of the BNNSs has been changed. However, simple treatments with hydrogen gas do not affect the bandgap width of the BNNSs.

  4. From 2D graphene to 1D graphene nanoribbons: dimensional crossover signals in the structural thermal fluctuations

    NASA Astrophysics Data System (ADS)

    Dobry, Ariel; Costamagna, Sebastián

    2011-03-01

    I this work, by analyzing the thermal excited rippling in the graphene honeycomb lattice, we find clear signals of an existing dimensional crossover from 2D to 1D while reducing one of the dimensions of the graphene layer. Trough a joint study, using montecarlo atomistic simulations and analytical calculation based, we find that the normal-normal correlation function G (q) does not change the power law behavior valid on the long wavelength limit, however the system size dependency of the quadratic out of plane displacement h2 shows a breakdown of its corresponding scaling law. In this case we show that a new scaling law appear which correspond to a truly 1D system. On the basis of these results, and having explored a wide number of realistic systems size, we conclude that narrow nanoribbons presents strongest corrugations than the square graphene sheets. This result could have important consequences on the electron transport properties of freestanding graphene systems.

  5. Simulation of plasma double-layer structures

    NASA Technical Reports Server (NTRS)

    Borovsky, J. E.; Joyce, G.

    1982-01-01

    Electrostatic plasma double layers are numerically simulated by means of a magnetized 2 1/2 dimensional particle in cell method. The investigation of planar double layers indicates that these one dimensional potential structures are susceptible to periodic disruption by instabilities in the low potential plasmas. Only a slight increase in the double layer thickness with an increase in its obliqueness to the magnetic field is observed. Weak magnetization results in the double layer electric field alignment of accelerated particles and strong magnetization results in their magnetic field alignment. The numerical simulations of spatially periodic two dimensional double layers also exhibit cyclical instability. A morphological invariance in two dimensional double layers with respect to the degree of magnetization implies that the potential structures scale with Debye lengths rather than with gyroradii. Electron beam excited electrostatic electron cyclotron waves and (ion beam driven) solitary waves are present in the plasmas adjacent to the double layers.

  6. Electronic and structural properties of 3D, 2D and 1D materials

    NASA Astrophysics Data System (ADS)

    Ribeiro, Filipe Joao

    In this work several applications of the ab initio pseudopotential density functional theory method are presented. With this method it is possible to calculate the electronic ground state properties of many systems like bulk solids, surfaces, nanotubes, and nanowires, and draw conclusions about the systems structural and electronic properties. With modifications of this approach excited states can also be treated. The first chapter of this thesis gives a brief description of the computational techniques employed. The second chapter describes results of calculations on the structural and electronic properties of carbon and germanium. We try to shed some light on a still poorly understood structural phase transition of graphite under pressure at low temperatures, which is different from the high temperature regime. Next, we study the phase transition path of germanium under pressure and predict the existence of a new phase. The following chapter explores the possibility of superconductivity in the graphite-like compound BC3 since there are many similarities between the electronic structure of this material and the 39 K superconductor MgB2. Subsequently, results of calculations on the adsorption of indium atoms on carbon nanotubes and graphite-like surfaces are presented. These studies explain some very interesting experimental results of In migration on nanotubes in an electrical potential. In the following chapters the electronic properties of very thin metallic MoSe nanowires are studied, and the different regimes of stability of metallic monatomic chains of Au, Al, Ag, Pd, Rh, and Ru are investigated and compared. Chapter 7 addresses the possible polymerization of C60 molecules inside carbon and boron nitride nanotubes. Finally, the propagation of a light signal in a medium with gains and losses is investigated, and the possibility of a discontinuity in the index of refraction is discussed.

  7. Tuning the Structural Color of a 2D Photonic Crystal Using a Bowl-like Nanostructure.

    PubMed

    Umh, Ha Nee; Yu, Sungju; Kim, Yong Hwa; Lee, Su Young; Yi, Jongheop

    2016-06-22

    Structural colors of the ordered photonic nanostructures are widely used as an effective platform for manipulating the propagation of light. Although several approaches have been explored in attempts to mimic the structural colors, improving the reproducibility, mechanical stability, and the economic feasibility of sophisticated photonic crystals prepared by complicated processes continues to pose a challenge. In this study, we report on an alternative, simple method for fabricating a tunable photonic crystal at room temperature. A bowl-like nanostructure of TiO2 was periodically arranged on a thin Ti sheet through a two-step anodization process where its diameters were systemically controlled by changing the applied voltage. Consequently, they displayed a broad color distribution, ranging from red to indigo, and the principal reason for color generation followed the Bragg diffraction theory. This noncolorant method was capable of reproducing a Mondrian painting on a centimeter scale without the need to employ complex architectures, where the generated structural colors were highly stable under mechanical or chemical influence. Such a color printing technique represents a potentially promising platform for practical applications for anticounterfeit trademarks, wearable sensors, and displays.

  8. Protein folding simulations of 2D HP model by the genetic algorithm based on optimal secondary structures.

    PubMed

    Huang, Chenhua; Yang, Xiangbo; He, Zhihong

    2010-06-01

    In this paper, based on the evolutionary Monte Carlo (EMC) algorithm, we have made four points of ameliorations and propose a so-called genetic algorithm based on optimal secondary structure (GAOSS) method to predict efficiently the protein folding conformations in the two-dimensional hydrophobic-hydrophilic (2D HP) model. Nine benchmarks are tested to verify the effectiveness of the proposed approach and the results show that for the listed benchmarks GAOSS can find the best solutions so far. It means that reasonable, effective and compact secondary structures (SSs) can avoid blind searches and can reduce time consuming significantly. On the other hand, as examples, we discuss the diversity of protein GSC for the 24-mer and 85-mer sequences. Several GSCs have been found by GAOSS and some of the conformations are quite different from each other. It would be useful for the designing of protein molecules. GAOSS would be an efficient tool for the protein structure predictions (PSP).

  9. Surviving structure in colloidal suspensions squeezed from 3D to 2D.

    PubMed

    Klapp, Sabine H L; Zeng, Yan; Qu, Dan; von Klitzing, Regine

    2008-03-21

    Combining colloidal-probe experiments and computer simulations, we analyze the solvation forces F of charged silica colloids confined in films of various thicknesses h. We show that the oscillations characterizing F(h), for sufficiently large h, are determined by the dominant wavelength of the bulk radial distribution function. As a consequence, both quantities display the same power-law density dependence. This is the first direct evidence, in a system treatable both by experiment and by simulation, that the structural wavelength in bulk and confinement coincide, in agreement with predictions from density functional theory. Moreover, theoretical and experimental data are in excellent quantitative agreement.

  10. The study of flexible emission and photoconductivity in 2D layered InSe toward an applicable 1000-nm light emitter and absorber

    NASA Astrophysics Data System (ADS)

    Chuang, Ching-An; Lin, Min-Han; Yeh, Bo-Xian; Chu, Yun-Ju; Ho, Ching-Hwa

    2017-03-01

    Multilayer InSe with a thickness above 20 nm is a direct semiconductor proposed for solar-energy conversion and to use in flexible optoelectronics. We demonstrate herein a superior 1000-nm light emission and absorption capability of two-dimensional (2D) multilayer InSe studied by photoluminescence (PL) and photoconductivity (PC) experiments. Layered crystals of InSe have been grown by chemical vapor transport method using ICl3 as a transport agent. Polarized Raman measurement confirmed 2 H ɛ crystalline phase of the as-grown crystals. For 2D flexible applications, the bending photoluminescence (BPL) result of InSe ( t ≈ 30 nm) showed an enhancement in light intensity with respect to that of the flat PL condition. It might be because the cylinder surface area under bending (convex) is larger than that of the flat surface under the same laser excitation condition. Besides, the luminescence efficiency of BPL is also enhanced owing to the widening of emission solid angle of each Se-In-In-Se unit in the InSe as compared to that of the flat PL condition. The emission wavelength is about 1000 nm at room temperature. Furthermore, for the PC study, photoresponsivity spectrum of a Ag-InSe-Ag multilayer photoconductor demonstrates a prominent peak absorption at 1.1 1.3 eV, matching well with the direct-free-exciton energy of the multilayer InSe. All the experimental results demonstrate that 2D multilayer InSe is a promising 1000 nm light emitter and absorber available for potential optoelectronics applications.

  11. 2-D Hierarchical Structure of a Block Copolymer and Bio-nanoparticle Composites

    NASA Astrophysics Data System (ADS)

    Shin, Dongseok; Lin, Yao; Wang, Qian; Russell, Thomas

    2007-03-01

    2-dimensional hierarchical structures were generated by combining two different self assembling systems; block copolymer and bio-nanoparticle. For this study, a block copolymer having a positively charged component, i.e. poly (styrene-b-N-methyl-4-vinylpyridinium iodide), was used. Thin film composites of this block copolymer and bio-nanoparticles were fabricated by adsorbing bio-particles on the polymer film and subsequently annealing the sample under the presence of solvent vapor. 2-dimensional hierarchical structures, where block copolymer chains microphase separated inside of discrete grains surrounded by bio-nanoparticles, were obtained with rod- like bio-particles (tobacco mosaic virus and M13 phage) as well as with spherical one (ferritin). The pH effect on the assembly of rod-like bio-particles and the morphology of composites was investigated. When the pH of the solution used for the adsorption of bio-particles was low, the bio-molecules aggregated and formed large bundles, while they were dispersed well at high pH. This difference was reflected in the morphology of the resultant complexes.

  12. Ellipse fitting of short light stripe for structured-light-based 2D vision inspection

    NASA Astrophysics Data System (ADS)

    Zhang, Guangjun; Wei, Zhenzhong

    2003-09-01

    Structured light based 3D vision has wide applications in inspecting the form and position errors like straightness and coaxiality of cylindrical workpieces. But for these applications, the light stripe on the workpiece's surface is much too short, and contains inadequate data information, even with some noise. Under such circumstances, the ellipse fitting to the scattered data of the light stripe is not efficient enough, and its fitting accuracy is usually poor. To address this problem, a new least-square fitting method based on the constraint of ellipse minor axis (called CEMA method) is proposed in detail in this paper. Simulations are given for the proposed method and for five other popular methods described in the literature. The results show that the proposed method can efficiently improve the accuracy and the robustness of ellipse fitting to the scattered data of short light stripe.

  13. Algorithms for the automatic generation of 2-D structured multi-block grids

    NASA Technical Reports Server (NTRS)

    Schoenfeld, Thilo; Weinerfelt, Per; Jenssen, Carl B.

    1995-01-01

    Two different approaches to the fully automatic generation of structured multi-block grids in two dimensions are presented. The work aims to simplify the user interactivity necessary for the definition of a multiple block grid topology. The first approach is based on an advancing front method commonly used for the generation of unstructured grids. The original algorithm has been modified toward the generation of large quadrilateral elements. The second method is based on the divide-and-conquer paradigm with the global domain recursively partitioned into sub-domains. For either method each of the resulting blocks is then meshed using transfinite interpolation and elliptic smoothing. The applicability of these methods to practical problems is demonstrated for typical geometries of fluid dynamics.

  14. TUNABLE Band Structures of 2d Multi-Atom Archimedean-Like Phononic Crystals

    NASA Astrophysics Data System (ADS)

    Xu, Y. L.; Chen, C. Q.; Tian, X. G.

    2012-06-01

    Two dimensional multi-atom Archimedean-like phononic crystals (MAPCs) can be obtained by adding "atoms" at suitable positions in primitive cells of traditional simple lattices. Band structures of solid-solid and solid-air MAPCs are computed by the finite element method in conjunction with the Bloch theory. For the solid-solid system, our results show that the MAPCs can be suitably designed to split and shift band gaps of the corresponding traditional simple phononic crystal (i.e., with only one scatterer inside a primitive cell). For the solid-air system, the MAPCs have more and wider band gaps than the corresponding traditional simple phononic crystal. Numerical calculations for both solid-solid and solid-air MAPCs show that the band gap of traditional simple phononic crystal can be tuned by appropriately adding "atoms" into its primitive cell.

  15. Structure elucidation of organic compounds from natural sources using 1D and 2D NMR techniques

    NASA Astrophysics Data System (ADS)

    Topcu, Gulacti; Ulubelen, Ayhan

    2007-05-01

    In our continuing studies on Lamiaceae family plants including Salvia, Teucrium, Ajuga, Sideritis, Nepeta and Lavandula growing in Anatolia, many terpenoids, consisting of over 50 distinct triterpenoids and steroids, and over 200 diterpenoids, several sesterterpenoids and sesquiterpenoids along with many flavonoids and other phenolic compounds have been isolated. For Salvia species abietanes, for Teucrium and Ajuga species neo-clerodanes for Sideritis species ent-kaurane diterpenes are characteristic while nepetalactones are specific for Nepeta species. In this review article, only some interesting and different type of skeleton having constituents, namely rearranged, nor- or rare diterpenes, isolated from these species will be presented. For structure elucidation of these natural diterpenoids intensive one- and two-dimensional NMR techniques ( 1H, 13C, APT, DEPT, NOE/NOESY, 1H- 1H COSY, HETCOR, COLOC, HMQC/HSQC, HMBC, SINEPT) were used besides mass and some other spectroscopic methods.

  16. Solving structure in the CP29 light harvesting complex with polarization-phased 2D electronic spectroscopy

    PubMed Central

    Ginsberg, Naomi S.; Davis, Jeffrey A.; Ballottari, Matteo; Cheng, Yuan-Chung; Bassi, Roberto; Fleming, Graham R.

    2011-01-01

    The CP29 light harvesting complex from green plants is a pigment-protein complex believed to collect, conduct, and quench electronic excitation energy in photosynthesis. We have spectroscopically determined the relative angle between electronic transition dipole moments of its chlorophyll excitation energy transfer pairs in their local protein environments without relying on simulations or an X-ray crystal structure. To do so, we measure a basis set of polarized 2D electronic spectra and isolate their absorptive components on account of the tensor relation between the light polarization sequences used to obtain them. This broadly applicable advance further enhances the acuity of polarized 2D electronic spectroscopy and provides a general means to initiate or feed back on the structural modeling of electronically-coupled chromophores in condensed phase systems, tightening the inferred relations between the spatial and electronic landscapes of ultrafast energy flow. We also discuss the pigment composition of CP29 in the context of light harvesting, energy channeling, and photoprotection within photosystem II. PMID:21321222

  17. 2D IR spectroscopy of histidine: probing side-chain structure and dynamics via backbone amide vibrations.

    PubMed

    Ghosh, Ayanjeet; Tucker, Matthew J; Gai, Feng

    2014-07-17

    It is well known that histidine is involved in many biological functions due to the structural versatility of its side chain. However, probing the conformational transitions of histidine in proteins, especially those occurring on an ultrafast time scale, is difficult. Herein we show, using a histidine dipeptide as a model, that it is possible to probe the tautomer and protonation status of a histidine residue by measuring the two-dimensional infrared (2D IR) spectrum of its amide I vibrational transition. Specifically, for the histidine dipeptide studied, the amide unit of the histidine gives rise to three spectrally resolvable amide I features at approximately 1630, 1644, and 1656 cm(-1), respectively, which, based on measurements at different pH values and frequency calculations, are assigned to a τ tautomer (1630 cm(-1) component) and a π tautomer with a hydrated (1644 cm(-1) component) or dehydrated (1656 cm(-1) component) amide. Because of the intrinsic ultrafast time resolution of 2D IR spectroscopy, we believe that the current approach, when combined with the isotope editing techniques, will be useful in revealing the structural dynamics of key histidine residues in proteins that are important for function.

  18. The Structure and Stability of Selected, 2-D Self-Gravitating Systems

    NASA Astrophysics Data System (ADS)

    Andalib, Saied W.

    1998-12-01

    Models of radially and vertically extended self-gravitating disks orbiting around a central point mass are relevant to the dynamics of astrophysical systems and are thought to be common in many galaxies. The gravity driven instabilities in these accretion disks are now believed to be a possible mechanism for star formation via disk fragmentation (Shu, Adams, & Lizano 1987, Adams, Rudin & Shu 1989; Christodoulou 1995). We quantify these regions of instability using a simple toroidal model of an accretion disk. We choose the two-dimensional axisymmetric, incompressible slender disks to examine and map out these principal modes of gravity driven instabilities. Through stability analyses and numerical simulations we have found that only the gravity driven 'intermediate' modes (see Goodman and Narayan 1988) are important in all self-gravitating accretion disks with small or moderate axis ratios. The P-mode instability found by Papalaizou and Pringle (1983) is unlikely to play a role in the dynamics of realistic disk systems. Next, we extend the existing numerical methods for constructing equilibrium structures to include nonaxisymmetric systems. We have developed a new computational technique to obtain two-dimensional, nonaxisymmetric, compressible systems with nontrivial internal motions. We have constructed two types of two-dimensional configurations: infinite cylinders and infinitesimally thin disks. The infinite cylinders have been primarily restricted to elliptic-like boundaries but the disks have exhibited much more flexibility in their geometries. At smaller axis ratios, they become dumbbells or loosely coupled binaries. The topology and dynamics of the flow is governed by the presence of vortices and stagnation points. In our simulation it is shown that there are equilibrium configurations that can only exist in the presence of internal differential motions and not in uniformly rotating models. This indicates that in general, the equilibrium structures of these

  19. Structure and properties of phosphorene-like IV-VI 2D materials.

    PubMed

    Ma, Zhinan; Wang, Bo; Ou, Liangkai; Zhang, Yan; Zhang, Xu; Zhou, Zhen

    2016-10-14

    Because of the excellent physical and chemical properties of phosphorene, phosphorene and phosphorene-like materials have attracted extensive attention. Since phosphorus belongs to group V, some group IV-VI compounds could also form phosphorene-like configurations. In this work, GeO, SnO, GeS, and SnS monolayers were constructed to investigate the structural and electronic properties by employing first-principles computations. Phonon spectra suggest that these monolayers are dynamically stable and could be realized in experiments. These monolayers are all semiconductors with the band gaps of 2.26 ∼ 4.13 eV. Based on the monolayers, GeO, SnO, GeS, and SnS bilayers were also constructed. The band gaps of these bilayers are smaller than those of the corresponding monolayers. Moreover, the optical properties of these monolayers and bilayers were calculated, and the results indicate that the SnO, GeS and SnS bilayers exhibit obvious optical absorption in the visible spectrum. All the results suggest that phosphorene-like IV-VI materials are promising candidates for electronic and optical devices.

  20. A novel 2-D transition metal cyanide membrane: Modeling, structural, magnetic, and functional characterization

    NASA Astrophysics Data System (ADS)

    Goss, Marcus

    A novel 2-dimensional crystalline material composed of cyanide-bridged metal nanosheets with a square planar framework has been prepared. This material, similar to Hofmann clathrates, has a variety of interesting properties. The material is crystalline and possesses characteristics that include magnetic properties, electronic properties and useful structural features. They have recently been exfoliated into individual crystalline sheets. These sheets show a strong potential for use as ion selective membranes. Performance improvements in water purification and desalination by reverse osmosis methods owing to their single atom thickness is possible. A series of dynamic molecular simulations has provided an understanding of the mechanism for water permeability and salt rejection. Energy profiles for the passage of water and ionic species through the porous areas of these nanosheets have been built and reported. Performance estimates of the efficacy of this novel material for use as an ion selective membrane such as an improved desalination RO membrane are presented. Experiments in synthesis and exfoliation of this class of cyanide-bridged transition metal complex were conducted and the results are presented. A preliminary investigation into the magnetic properties of these materials is included.

  1. Characterization of Unsteady Flow Structures Near Landing-Edge Slat. Part 2; 2D Computations

    NASA Technical Reports Server (NTRS)

    Khorrami, Mehdi; Choudhari, Meelan M.; Jenkins, Luther N.

    2004-01-01

    In our previous computational studies of a generic high-lift configuration, quasi-laminar (as opposed to fully turbulent) treatment of the slat cove region proved to be an effective approach for capturing the unsteady dynamics of the cove flow field. Combined with acoustic propagation via Ffowes Williams and Hawkings formulation, the quasi-laminar simulations captured some important features of the slat cove noise measured with microphone array techniques. However. a direct assessment of the computed cove flow field was not feasible due to the unavailability of off-surface flow measurements. To remedy this shortcoming, we have undertaken a combined experiment and computational study aimed at characterizing the flow structures and fluid mechanical processes within the slat cove region. Part I of this paper outlines the experimental aspects of this investigation focused on the 30P30N high-lift configuration; the present paper describes the accompanying computational results including a comparison between computation and experiment at various angles of attack. Even through predictions of the time-averaged flow field agree well with the measured data, the study indicates the need for further refinement of the zonal turbulence approach in order to capture the full dynamics of the cove's fluctuating flow field.

  2. Electrophysiological and Structural Remodeling in Heart Failure Modulate Arrhythmogenesis. 2D Simulation Study

    PubMed Central

    Gomez, Juan F.; Cardona, Karen; Martinez, Laura; Saiz, Javier; Trenor, Beatriz

    2014-01-01

    Background Heart failure is operationally defined as the inability of the heart to maintain blood flow to meet the needs of the body and it is the final common pathway of various cardiac pathologies. Electrophysiological remodeling, intercellular uncoupling and a pro-fibrotic response have been identified as major arrhythmogenic factors in heart failure. Objective In this study we investigate vulnerability to reentry under heart failure conditions by incorporating established electrophysiological and anatomical remodeling using computer simulations. Methods The electrical activity of human transmural ventricular tissue (5 cm×5 cm) was simulated using the human ventricular action potential model Grandi et al. under control and heart failure conditions. The MacCannell et al. model was used to model fibroblast electrical activity, and their electrotonic interactions with myocytes. Selected degrees of diffuse fibrosis and variations in intercellular coupling were considered and the vulnerable window (VW) for reentry was evaluated following cross-field stimulation. Results No reentry was observed in normal conditions or in the presence of HF ionic remodeling. However, defined amount of fibrosis and/or cellular uncoupling were sufficient to elicit reentrant activity. Under conditions where reentry was generated, HF electrophysiological remodeling did not alter the width of the VW. However, intermediate fibrosis and cellular uncoupling significantly widened the VW. In addition, biphasic behavior was observed, as very high fibrotic content or very low tissue conductivity hampered the development of reentry. Detailed phase analysis of reentry dynamics revealed an increase of phase singularities with progressive fibrotic components. Conclusion Structural remodeling is a key factor in the genesis of vulnerability to reentry. A range of intermediate levels of fibrosis and intercellular uncoupling can combine to favor reentrant activity. PMID:25054335

  3. Unusual Domain Structure and Filamentary Superfluidity for 2D Hard-Core Bosons in Insulating Charge-Ordered Phase

    NASA Astrophysics Data System (ADS)

    Panov, Yu. D.; Moskvin, A. S.; Rybakov, F. N.; Borisov, A. B.

    2016-12-01

    We made use of a special algorithm for compute unified device architecture for NVIDIA graphics cards, a nonlinear conjugate-gradient method to minimize energy functional, and Monte-Carlo technique to directly observe the forming of the ground state configuration for the 2D hard-core bosons by lowering the temperature and its evolution with deviation away from half-filling. The novel technique allowed us to examine earlier implications and uncover novel features of the phase transitions, in particular, look upon the nucleation of the odd domain structure, emergence of filamentary superfluidity nucleated at the antiphase domain walls of the charge-ordered phase, and nucleation and evolution of different topological structures.

  4. Bifurcations of edge states—topologically protected and non-protected—in continuous 2D honeycomb structures

    NASA Astrophysics Data System (ADS)

    Fefferman, C. L.; Lee-Thorp, J. P.; Weinstein, M. I.

    2016-03-01

    Edge states are time-harmonic solutions to energy-conserving wave equations, which are propagating parallel to a line-defect or ‘edge’ and are localized transverse to it. This paper summarizes and extends the authors’ work on the bifurcation of topologically protected edge states in continuous two-dimensional (2D) honeycomb structures. We consider a family of Schrödinger Hamiltonians consisting of a bulk honeycomb potential and a perturbing edge potential. The edge potential interpolates between two different periodic structures via a domain wall. We begin by reviewing our recent bifurcation theory of edge states for continuous 2D honeycomb structures (http://arxiv.org/abs/1506.06111). The topologically protected edge state bifurcation is seeded by the zero-energy eigenstate of a one-dimensional Dirac operator. We contrast these protected bifurcations with (more common) non-protected bifurcations from spectral band edges, which are induced by bound states of an effective Schrödinger operator. Numerical simulations for honeycomb structures of varying contrasts and ‘rational edges’ (zigzag, armchair and others), support the following scenario: (a) for low contrast, under a sign condition on a distinguished Fourier coefficient of the bulk honeycomb potential, there exist topologically protected edge states localized transverse to zigzag edges. Otherwise, and for general edges, we expect long lived edge quasi-modes which slowly leak energy into the bulk. (b) For an arbitrary rational edge, there is a threshold in the medium-contrast (depending on the choice of edge) above which there exist topologically protected edge states. In the special case of the armchair edge, there are two families of protected edge states; for each parallel quasimomentum (the quantum number associated with translation invariance) there are edge states which propagate in opposite directions along the armchair edge.

  5. The Kinematics of Turbulent Boundary Layer Structure

    NASA Technical Reports Server (NTRS)

    Robinson, Stephen Kern

    1991-01-01

    The long history of research into the internal structure of turbulent boundary layers has not provided a unified picture of the physics responsible for turbulence production and dissipation. The goals of the present research are to: (1) define the current state of boundary layer structure knowledge; and (2) utilize direct numerical simulation results to help close the unresolved issues identified in part A and to unify the fragmented knowledge of various coherent motions into a consistent kinematic model of boundary layer structure. The results of the current study show that all classes of coherent motion in the low Reynolds number turbulent boundary layer may be related to vortical structures, but that no single form of vortex is representative of the wide variety of vortical structures observed. In particular, ejection and sweep motions, as well as entrainment from the free-streem are shown to have strong spatial and temporal relationships with vortical structures. Disturbances of vortex size, location, and intensity show that quasi-streamwise vortices dominate the buffer region, while transverse vortices and vortical arches dominate the wake region. Both types of vortical structure are common in the log region. The interrelationships between the various structures and the population distributions of vortices are combined into a conceptual kinematic model for the boundary layer. Aspects of vortical structure dynamics are also postulated, based on time-sequence animations of the numerically simulated flow.

  6. Quantification of layered patterns with structural anisotropy: a comparison of biological and geological systems.

    PubMed

    Smolyar, I; Bromage, T; Wikelski, M

    2016-03-01

    Large-scale patterns evident from satellite images of aeolian landforms on Earth and other planets; those of intermediate scale in marine and terrestrial sand ripples and sediment profiles; and small-scale patterns such as lamellae in the bones of vertebrates and annuli in fish scales are each represented by layers of different thicknesses and lengths. Layered patterns are important because they form a record of the state of internal and external factors that regulate pattern formation in these geological and biological systems. It is therefore potentially possible to recognize trends, periodicities, and events in the history of the formation of these systems among the incremental sequences. Though the structures and sizes of these 2-D patterns are typically scale-free, they are also characteristically anisotropic; that is, the number of layers and their absolute thicknesses vary significantly during formation. The aim of the present work is to quantify the structure of layered patterns and to reveal similarities and differences in the processing and interpretation of layered landforms and biological systems. To reach this goal we used N-partite graph and Boolean functions to quantify the structure of layers and plot charts for "layer thickness vs. layer number" and "layer area vs. layer number". These charts serve as a source of information about events in the history of formation of layered systems. The concept of synchronization of layer formation across a 2-D plane is introduced to develop the procedure for plotting "layer thickness vs. layer number" and "layer area vs. layer number", which takes into account the structural anisotropy of layered patterns and increase signal-to-noise ratio in charts. Examples include landforms on Mars and Earth and incremental layers in human and iguana bones.

  7. Direct observation of the layer-dependent electronic structure in phosphorene

    NASA Astrophysics Data System (ADS)

    Li, Likai; Kim, Jonghwan; Jin, Chenhao; Ye, Guo Jun; Qiu, Diana Y.; da Jornada, Felipe H.; Shi, Zhiwen; Chen, Long; Zhang, Zuocheng; Yang, Fangyuan; Watanabe, Kenji; Taniguchi, Takashi; Ren, Wencai; Louie, Steven G.; Chen, Xian Hui; Zhang, Yuanbo; Wang, Feng

    2017-01-01

    Phosphorene, a single atomic layer of black phosphorus, has recently emerged as a new two-dimensional (2D) material that holds promise for electronic and photonic technologies. Here we experimentally demonstrate that the electronic structure of few-layer phosphorene varies significantly with the number of layers, in good agreement with theoretical predictions. The interband optical transitions cover a wide, technologically important spectral range from the visible to the mid-infrared. In addition, we observe strong photoluminescence in few-layer phosphorene at energies that closely match the absorption edge, indicating that they are direct bandgap semiconductors. The strongly layer-dependent electronic structure of phosphorene, in combination with its high electrical mobility, gives it distinct advantages over other 2D materials in electronic and opto-electronic applications.

  8. Self-assembly and morphology change of four organic-polyoxometalate hybrids with different solid structures from 2D lamellar to 3D hexagonal forms

    NASA Astrophysics Data System (ADS)

    TAN, Chunxia

    2017-02-01

    A series of organic-polyoxometalate hybrids L-EuW11, L-EuW10, L-EuW22 and L-Mo132 were fabricated by the same organic cations with different polyoxometalate anions from K5[Eu(SiW11O39)(H2O)2], K13[Eu(SiW11O39)2]·15H2O, Na9[EuW10O36]·36H2O to "Keplerate" -type (NH4)72[Mo132O372(SO4)30(H2O)72]. The structures of hybrids were characterized by elemental analysis, thermogravimetric analysis (TGA), infrared spectra (IR) and small-angle X-ray scattering (SAXS). Self-assembly behaviors and aggregates morphology of these hybrids in mixed solution of chloroform-methanol are obtained by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). L-EuW11, L-EuW10 and L-EuW22 have different aggregation morphology but the similarly layered structures. Micron-sized vesicular structures of L-Mo132 rupture in solvent and eventually turn into approximate hexagon. SAXS analysis of L-EuW11, L-EuW10 and L-EuW22 shows that these hybrids aggregates change from two-dimensional (2D) lamellar to three-dimensional (3D) hexagonal structure in solid state.

  9. Controlled Self-Assembly of Cyclophane Amphiphiles: From 1D Nanofibers to Ultrathin 2D Topological Structures

    SciTech Connect

    Cai, Zhengxu; Li, Lianwei; Lo, Wai-Yip; Zhao, Donglin; Wu, Qinghe; Zhang, Na; Su, Yu-An; Chen, Wei; Yu, Luping

    2016-07-05

    A novel series of amphiphilic TC-PEG molecules were designed and synthesized based on the orthogonal cyclophane unit. These molecules were able to self-assemble from 1D nanofibers and nanobelts to 2D ultrathin nanosheets (3 nm thick) in a controlled way by tuning the length of PEG side chains. The special structure of the cyclophane moiety allowed control in construction of nanostructures through programmed noncovalent interactions (hydrophobic hydrophilic interaction and pi-pi interaction). The self-assembled nanostructures were characterized by combining real space imaging (TEM, SEM, and AFM) and reciprocal space scattering (GIWAXS) techniques. This unique supramolecular system may provide a new strategy for the design of materials with tunable nanomorphology and functionality.

  10. Structural, electronic transport and optical properties of functionalized quasi-2D TiC2 from first-principles calculations

    NASA Astrophysics Data System (ADS)

    Berdiyorov, G. R.; Madjet, M. E.

    2016-12-01

    Using the first-principles density functional theory, we study the effect of surface functionalization on the structural and optoelectronic properties of recently proposed quasi-two-dimensional material TiC2 [T. Zhao, S. Zhang, Y. Guo, Q. Wang, Nanoscale 8 (2016) 233]. Hydrogenated, fluorinated, oxidized and hydroxylated surfaces are considered. Significant changes in the lattice parameters and partial charge distributions are found due to the surface termination. Direct contribution of the adatoms to the system density of states near the Fermi level is obtained, which has a major impact on the optoelectronic properties of the material. For example, surface termination results in larger absorption in the visible range of the spectrum. The electronic transport is also affected by the surface functionalization: the current in the system can be reduced by an order of magnitude. These findings indicate the importance of the effects of surface passivation on optoelectronic properties of this quasi-2D material.

  11. Effects of complex internal structures on rheology of multiple emulsions particles in 2D from a boundary integral method.

    PubMed

    Wang, Jingtao; Liu, Jinxia; Han, Junjie; Guan, Jing

    2013-02-08

    A boundary integral method is developed to investigate the effects of inner droplets and asymmetry of internal structures on rheology of two-dimensional multiple emulsion particles with arbitrary numbers of layers and droplets within each layer. Under a modest extensional flow, the number increment of layers and inner droplets, and the collision among inner droplets subject the particle to stronger shears. In addition, the coalescence or release of inner droplets changes the internal structure of the multiple emulsion particles. Since the rheology of such particles is sensitive to internal structures and their change, modeling them as the core-shell particles to obtain the viscosity equation of a single particle should be modified by introducing the time-dependable volume fraction Φ(t) of the core instead of the fixed Φ. An asymmetric internal structure induces an oriented contact and merging of the outer and inner interface. The start time of the interface merging is controlled by adjusting the viscosity ratio and enhancing the asymmetry, which is promising in the controlled release of inner droplets through hydrodynamics for targeted drug delivery.

  12. Coherent phenomena in terahertz 2D plasmonic structures: strong coupling, plasmonic crystals, and induced transparency by coupling of localized modes

    NASA Astrophysics Data System (ADS)

    Dyer, Gregory C.; Aizin, Gregory R.; Allen, S. James; Grine, Albert D.; Bethke, Don; Reno, John L.; Shaner, Eric A.

    2014-05-01

    The device applications of plasmonic systems such as graphene and two dimensional electron gases (2DEGs) in III-V heterostructures include terahertz detectors, mixers, oscillators and modulators. These two dimensional (2D) plasmonic systems are not only well-suited for device integration, but also enable the broad tunability of underdamped plasma excitations via an applied electric field. We present demonstrations of the coherent coupling of multiple voltage tuned GaAs/AlGaAs 2D plasmonic resonators under terahertz irradiation. By utilizing a plasmonic homodyne mixing mechanism to downconvert the near field of plasma waves to a DC signal, we directly detect the spectrum of coupled plasmonic micro-resonator structures at cryogenic temperatures. The 2DEG in the studied devices can be interpreted as a plasmonic waveguide where multiple gate terminals control the 2DEG kinetic inductance. When the gate tuning of the 2DEG is spatially periodic, a one-dimensional finite plasmonic crystal forms. This results in a subwavelength structure, much like a metamaterial element, that nonetheless Bragg scatters plasma waves from a repeated crystal unit cell. A 50% in situ tuning of the plasmonic crystal band edges is observed. By introducing gate-controlled defects or simply terminating the lattice, localized states arise in the plasmonic crystal. Inherent asymmetries at the finite crystal boundaries produce an induced transparency-like phenomenon due to the coupling of defect modes and crystal surface states known as Tamm states. The demonstrated active control of coupled plasmonic resonators opens previously unexplored avenues for sensitive direct and heterodyne THz detection, planar metamaterials, and slow-light devices.

  13. Kohn-Sham Band Structure Benchmark Including Spin-Orbit Coupling for 2D and 3D Solids

    NASA Astrophysics Data System (ADS)

    Huhn, William; Blum, Volker

    2015-03-01

    Accurate electronic band structures serve as a primary indicator of the suitability of a material for a given application, e.g., as electronic or catalytic materials. Computed band structures, however, are subject to a host of approximations, some of which are more obvious (e.g., the treatment of the exchange-correlation of self-energy) and others less obvious (e.g., the treatment of core, semicore, or valence electrons, handling of relativistic effects, or the accuracy of the underlying basis set used). We here provide a set of accurate Kohn-Sham band structure benchmarks, using the numeric atom-centered all-electron electronic structure code FHI-aims combined with the ``traditional'' PBE functional and the hybrid HSE functional, to calculate core, valence, and low-lying conduction bands of a set of 2D and 3D materials. Benchmarks are provided with and without effects of spin-orbit coupling, using quasi-degenerate perturbation theory to predict spin-orbit splittings. This work is funded by Fritz-Haber-Institut der Max-Planck-Gesellschaft.

  14. Cooperative Jahn-Teller effect in a 2D mesoscopic C{60/n-} system with D5d symmetry adsorbed on buffer layers using Ising EFT model

    NASA Astrophysics Data System (ADS)

    Abou Ghantous, M.; Moujaes, E. A.; Dunn, J. L.; Khater, A.

    2012-06-01

    Fullerene molecules adsorbed on surfaces often show macroscopic average distortions. As charged ions C60n- are known to be Jahn-Teller (JT) active, it is suggested that these distortions could be a manifestation of cooperative JT effects (CJTE) due to interactions between neighbouring fullerene ions. In order to understand the distortion properties it is necessary to take correlations between different distortions into account. However, this can't easily be done in the mean field approximation usually used to describe the CJTE. We therefore propose an alternative procedure to describe 2D mesoscopic islands of C60 ions in which a pseudo vector spin overrightarrow{S} is evoked to represent degenerate JT-distorted states when the quadratic JT coupling is considered. This approach is analogous to methods used for 2D magnetic systems. We then use the differential operator technique in effective field theory within the Ising approach. We include the effects of weak surface interactions and dynamic motion between equivalent distortions via terms equivalent to anisotropy and a transverse field in magnetism respectively. For distortions to D5d symmetry, we determine single site correlations as a function of temperature, the macroscopic average distortion describing a structural phase transition, and the isothermal response function. Phase diagrams are presented for relevant cases of the system parameters.

  15. Structure of relaminarizing turbulent boundary layers

    NASA Astrophysics Data System (ADS)

    Ramesh, O.; Patwardhan, Saurabh

    2014-11-01

    Relaminarization of a turbulent boundary layer in a strongly accelerated flow has received a great attention in recent times. It has been found that such relaminarization is a general and regularly occurring phenomenon in the leading-edge region of a swept wing of an airplane (van Dam et al., 1993). In this work, we investigate the effect of initial Reynolds number on the process of relaminarization in turbulent boundary layers. The experimental and numerical investigation of relaminarizing turbulent boundary layers undergoing same history reveals that the boundary layer with higher initial Reynolds number relaminarizes at a lower pressure gradient value compared to the one with lower Reynolds number. This effect can be explained on the inviscid theory proposed earlier in the literature. Further, various parameter criteria proposed to predict relaminarization, are assessed and the structure of relaminarizing boundary layers is investigated. A mechanism for stabilization of near-wall low speed streaks is proposed.

  16. Energy gap structure of layered superconductors

    SciTech Connect

    Liu, S.H.; Klemm, R.A.

    1993-11-01

    We report the energy gap structure and density-of-states (DOS) of a model layered superconductor with one superconducting layer and one normal layer in a unit cell along the c-axis. In the physically interesting parameter range where the interlayer hopping strengths of the quasiparticles are comparable to the critical temperature, the peaks in the DOS curve do not correspond to the order parameter (OP) of the superconducting layer, but depend on the OP and the band dispersion in the c-direction in a complex manner. In contrast to a BCS superconductor, the DOS of layered systems have logarithmic singularities. Our simulated tunneling characteristics bear close resemblance to experimental results.

  17. Graphene Substrate for van der Waals Epitaxy of Layer-Structured Bismuth Antimony Telluride Thermoelectric Film.

    PubMed

    Kim, Eun Sung; Hwang, Jae-Yeol; Lee, Kyu Hyoung; Ohta, Hiromichi; Lee, Young Hee; Kim, Sung Wng

    2017-02-01

    Graphene as a substrate for the van der Waals epitaxy of 2D layered materials is utilized for the epitaxial growth of a layer-structured thermoelectric film. Van der Waals epitaxial Bi0.5 Sb1.5 Te3 film on graphene synthesized via a simple and scalable fabrication method exhibits good crystallinity and high thermoelectric transport properties comparable to single crystals.

  18. Thermally-induced single-crystal-to-single-crystal transformations from a 2D two-fold interpenetrating square lattice layer to a 3D four-fold interpenetrating diamond framework and its application in dye-sensitized solar cells.

    PubMed

    Gao, Song; Fan, Rui Qing; Wang, Xin Ming; Wei, Li Guo; Song, Yang; Du, Xi; Xing, Kai; Wang, Ping; Yang, Yu Lin

    2016-07-28

    In this work, a rare 2D → 3D single-crystal-to-single-crystal transformation (SCSC) is observed in metal-organic coordination complexes, which is triggered by thermal treatment. The 2D two-fold interpenetrating square lattice layer [Cd(IBA)2]n (1) is irreversibly converted into a 3D four-fold interpenetrating diamond framework {[Cd(IBA)2(H2O)]·2.5H2O}n (2) (HIBA = 4-(1H-imidazol-1-yl)benzoic acid). Consideration is given to these two complexes with different interpenetrating structures and dimensionality, and their influence on photovoltaic properties are studied. Encouraged by the UV-visible absorption and HOMO-LUMO energy states matched for sensitizing TiO2, the two complexes are employed in combination with N719 in dye-sensitized solar cells (DSSCs) to compensate absorption in the ultraviolet and blue-violet region, offset competitive visible light absorption of I3(-) and reducing charge the recombination of injected electrons. After co-sensitization with 1 and 2, the device co-sensitized by 1/N719 and 2/N719 to yield overall efficiencies of 7.82% and 8.39%, which are 19.94% and 28.68% higher than that of the device sensitized only by N719 (6.52%). Consequently, high dimensional interpenetrating complexes could serve as excellent co-sensitizers and have application in DSSCs.

  19. Photodetectors Based on Two-Dimensional Layer-Structured Hybrid Lead Iodide Perovskite Semiconductors.

    PubMed

    Zhou, Jiachen; Chu, Yingli; Huang, Jia

    2016-10-05

    Hybrid lead iodide perovskite semiconductors have attracted intense research interests recently because of their easy fabrication processes and high power conversion efficiencies in photovoltaic applications. Layer-structured materials have interesting properties such as quantum confinement effect and tunable band gap due to the unique two-dimensional crystalline structures. ⟨100⟩-oriented layer-structured perovskite materials are inherited from three-dimensional ABX3 perovskite materials with a generalized formula of (RNH3)2(CH3NH3)n-1MnX3n+1, and adopt the Ruddlesden-Popper type crystalline structure. Here we report the synthesis and investigation of three layer-structured perovskite materials with different layer numbers: (C4H9NH3)2PbI4 (n = 1, one-layered perovskite), (C4H9NH3)2(CH3NH3)Pb2I7 (n = 2, two-layered perovskite) and (C4H9NH3)2(CH3NH3)2Pb3I10 (n = 3, three-layered perovskite). Their photoelectronic properties were investigated in related to their molecular structures. Photodetectors based on these two-dimensional (2D) layer-structured perovskite materials showed tunable photoresponse with short response time in milliseconds. The photodetectors based on three-layered perovskite showed better performances than those of the other two devices, in terms of output current, responsivity, Ilight/Idark ratio, and response time, because of its smaller optical band gap and more condensed microstructure comparing the other two materials. These results revealed the relationship between the molecular structures, film microstructures and the photoresponse properties of 2D layer-structured hybrid perovskites, and demonstrated their potentials as flexible, functional, and tunable semiconductors in optoelectronic applications, by taking advantage of their tunable quantum well molecular structure.

  20. The structure of APG turbulent boundary layers

    NASA Astrophysics Data System (ADS)

    Gungor, Ayse G.; Maciel, Yvan; Simens, Mark P.; Soria, Julio

    2013-11-01

    A boundary layer under influence of a strong APG is studied using DNS. Transition to turbulence is triggered using a trip wire which is modelled using the immersed boundary method. The Reynolds number close to the exit of the numerical domain is Reθ = 2175 and the shape-factor H = 2 . 5 . Two dimensional two-point spatial correlation functions are obtained in this region and close to the transition region. Cvu with a reference point close to the transition region shows a flow periodicity until Reθ ~ 1600 . This periodicity is related to the shear layer instability of the separation bubble created as a result of the APG. The Cvv and Cww correlations obtained far from the transition region at Reθ = 2175 and at y / δ = 0 . 4 coincide with results obtained for a ZPG boundary layer. Implying that the structure of the v , w fluctuations is the same as in ZPG. However, Cuu indicates that the structure of the u fluctuation in an APG boundary layer is almost twice as short as the ZPG structures. The APG structures are also less correlated with the flow at the wall. The near wall structure of strong APG flows is different from ZPG flows in that streaks are much shorter or absent. Funded in part by ITU, NSERC of Canada, ARC Discovery Grant, and Multiflow program of the ERC.

  1. Nanomanufacturing : nano-structured materials made layer-by-layer.

    SciTech Connect

    Cox, James V.; Cheng, Shengfeng; Grest, Gary Stephen; Tjiptowidjojo, Kristianto; Reedy, Earl David, Jr.; Fan, Hongyou; Schunk, Peter Randall; Chandross, Michael Evan; Roberts, Scott A.

    2011-10-01

    Large-scale, high-throughput production of nano-structured materials (i.e. nanomanufacturing) is a strategic area in manufacturing, with markets projected to exceed $1T by 2015. Nanomanufacturing is still in its infancy; process/product developments are costly and only touch on potential opportunities enabled by growing nanoscience discoveries. The greatest promise for high-volume manufacturing lies in age-old coating and imprinting operations. For materials with tailored nm-scale structure, imprinting/embossing must be achieved at high speeds (roll-to-roll) and/or over large areas (batch operation) with feature sizes less than 100 nm. Dispersion coatings with nanoparticles can also tailor structure through self- or directed-assembly. Layering films structured with these processes have tremendous potential for efficient manufacturing of microelectronics, photovoltaics and other topical nano-structured devices. This project is designed to perform the requisite R and D to bring Sandia's technology base in computational mechanics to bear on this scale-up problem. Project focus is enforced by addressing a promising imprinting process currently being commercialized.

  2. Structure of the HCMV UL16-MICB Complex Elucidates Select Binding of a Viral Immunoevasin to Diverse NKG2D Ligands

    PubMed Central

    Müller, Steffen; Zocher, Georg; Steinle, Alexander; Stehle, Thilo

    2010-01-01

    The activating immunoreceptor NKG2D promotes elimination of infected or malignant cells by cytotoxic lymphocytes through engagement of stress-induced MHC class I-related ligands. The human cytomegalovirus (HCMV)-encoded immunoevasin UL16 subverts NKG2D-mediated immune responses by retaining a select group of diverse NKG2D ligands inside the cell. We report here the crystal structure of UL16 in complex with the NKG2D ligand MICB at 1.8 Å resolution, revealing the molecular basis for the promiscuous, but highly selective, binding of UL16 to unrelated NKG2D ligands. The immunoglobulin-like UL16 protein utilizes a three-stranded β-sheet to engage the α-helical surface of the MHC class I-like MICB platform domain. Intriguingly, residues at the center of this β-sheet mimic a central binding motif employed by the structurally unrelated C-type lectin-like NKG2D to facilitate engagement of diverse NKG2D ligands. Using surface plasmon resonance, we find that UL16 binds MICB, ULBP1, and ULBP2 with similar affinities that lie in the nanomolar range (12–66 nM). The ability of UL16 to bind its ligands depends critically on the presence of a glutamine (MICB) or closely related glutamate (ULBP1 and ULBP2) at position 169. An arginine residue at this position however, as found for example in MICA or ULBP3, would cause steric clashes with UL16 residues. The inability of UL16 to bind MICA and ULBP3 can therefore be attributed to single substitutions at key NKG2D ligand locations. This indicates that selective pressure exerted by viral immunoevasins such as UL16 contributed to the diversification of NKG2D ligands. PMID:20090832

  3. Terrace Zone Structure in the Chicxulub Impact Crater Based on 2-D Seismic Reflection Profiles: Preliminary Results From EW#0501

    NASA Astrophysics Data System (ADS)

    McDonald, M. A.; Gulick, S. P.; Gorney, D. L.; Christeson, G. L.; Barton, P. J.; Morgan, J. V.; Warner, M. R.; Urrutia-Fucugauchi, J.; Melosh, H. J.; Vermeesch, P. M.; Surendra, A. T.; Goldin, T.; Mendoza, K.

    2005-05-01

    Terrace zones, central peaks, and flat floors characterize complex craters like the Chicxulub impact crater located near the northeast coast of the Yucatan Peninsula. The subsurface crater structure was studied using seismic reflection surveying in Jan/Feb 2005 by the R/V Maurice Ewing. We present 2-D seismic profiles including constant radius, regional, and grid profiles encompassing the 195 km width of the crater. These diversely oriented lines clearly show the terrace zones and aid in the search for crater ejecta as we investigate the formation of the crater including the incidence angle and direction of the extraterrestrial object that struck the Yucatan Peninsula 65 million years ago (K-T boundary). Terrace zones form in complex craters after the modification stage as a result of the gravitational collapse of overextended sediment back into the crater cavity. The terrace zone is clearly imaged on seismic profiles confirming the complex structure of the Chixculub crater. Recent work on reprocessed 1996 profiles found different sizes and spacing of the terraces and concluded that the variations in radial structure are a result of an oblique impact. A SW-NE profile from this study was the only line to show a concentration of deformation near the crater rim hinting that the northeast was the downrange direction of impact. We confirm this narrowing in terrace spacing using a profile with a similar orientation in the 2005 images. Through integration of the new dense grid of profiles and radial lines from the 1996 and 2005 surveys we map the 3-D variability of the terrace zones to further constrain impact direction and examine the formative processes of the Chixculub and other large impact craters.

  4. Structural phase transitions in layered perovskitelike crystals

    SciTech Connect

    Aleksandrov, K.S.

    1995-03-01

    Possible symmetry changes due to small tilts of octahedra are considered for layered perovskite-like crystals containing slabs of several ({ell}) layers of comer-sharing octahedra. In the crystals with {ell} > 1, four types of distortions are possible; as a rule, these distortions correspond to the librational modes of the parent lattice. Condensation of these soft modes is the reason for structural phase transitions or sequences of phase transitions. The results obtained are compared with the known experimental data for a number of layered ferroelectric and ferroelastic perovskite-like compounds. An application of the results to the initial stage of determining unknown structures is discussed with particular attention paid to high-temperature superconductors. 76 refs., 9 figs., 7 tabs.

  5. Vertical 2D Heterostructures

    NASA Astrophysics Data System (ADS)

    Lotsch, Bettina V.

    2015-07-01

    Graphene's legacy has become an integral part of today's condensed matter science and has equipped a whole generation of scientists with an armory of concepts and techniques that open up new perspectives for the postgraphene area. In particular, the judicious combination of 2D building blocks into vertical heterostructures has recently been identified as a promising route to rationally engineer complex multilayer systems and artificial solids with intriguing properties. The present review highlights recent developments in the rapidly emerging field of 2D nanoarchitectonics from a materials chemistry perspective, with a focus on the types of heterostructures available, their assembly strategies, and their emerging properties. This overview is intended to bridge the gap between two major—yet largely disjunct—developments in 2D heterostructures, which are firmly rooted in solid-state chemistry or physics. Although the underlying types of heterostructures differ with respect to their dimensions, layer alignment, and interfacial quality, there is common ground, and future synergies between the various assembly strategies are to be expected.

  6. Self-assembly of silver(I) coordination polymers from aminopyrimidyl derivatives and malonate acid: From 1D chain to 2D layer

    NASA Astrophysics Data System (ADS)

    Sun, Di; Zhang, Na; Xu, Qin-Juan; Luo, Geng-Geng; Huang, Rong-Bin; Zheng, Lan-Sun

    2010-04-01

    Two new silver(I) coordination polymers (CPs) of the formula [Ag 2(dmapym) 4(mal)·H 2O] n ( 1) and [Ag 3(apym) 3(mal)NO 3] n ( 2) (dmapym = 2-amino-4,6-dimethylprimidine, apym = 2-aminopyrimidine, H 2mal = malonate) have been synthesized by reactions of AgNO 3 and 2-aminopyrimidyl ligands with malonate under the ammoniacal condition. Both complexes have been characterized by element analysis, IR and single-crystal X-ray diffraction. The monodentate dmapym and tridentate mal ligands link Ag(I) ions to give complex 1 a one-dimensional (1D) H-shaped chain structure. The complex 2 is a two-dimensional (2D) double sheet structure constructed by (4, 4) single sheet. Additionally, the hydrogen-bonding and C-H⋯π interactions also direct the self-assembly of supramolecular architectures. The photoluminescence properties of the 1 and 2 were investigated in the solid state at room temperature.

  7. 3D and 2D structural characterization of 1D Al/Al2 O3 biphasic nanostructures.

    PubMed

    Miró, M Martinez; Veith, M; Lee, J; Soldera, F; Mücklich, F; Bennewitz, R; Aktas, C

    2015-05-01

    1D Al/Al2 O3 nanostructures have been synthesized by chemical vapour deposition (CVD) of the molecular precursor [(t) BuOAlH2 ]2 . The deposited nanostructures grow chaotically on the substrate forming a layer with a high porosity (80%). Depending on the deposition time, diverse nanostructured surfaces with different distribution densities were achieved. A three-dimensional (3D) reconstruction has been evaluated for every nanostructure density using the Focus Ion Beam (FIB) tomography technique and reconstruction software tools. Several structural parameters such as porosity, Euler number, geometrical tortuosity and aspect ratio have been quantified through the analysis with specified software of the reconstructions. Additionally roughness of the prepared surfaces has been characterized at micro- and nanoscale using profilometry and AFM techniques, respectively. While high aspects ratio around 20-30 indicates a strong anisotropy in the structure, high porosity values (around 80%) is observed as a consequence of highly tangled geometry of such 1D nanostructures.

  8. Self-assembly of polydimethylsiloxane structures from 2D to 3D for bio-hybrid actuation.

    PubMed

    Vannozzi, L; Ricotti, L; Cianchetti, M; Bearzi, C; Gargioli, C; Rizzi, R; Dario, P; Menciassi, A

    2015-08-20

    This work aims to demonstrate the feasibility of a novel approach for the development of 3D self-assembled polydimethylsiloxane structures, to be used as engineered flexible matrices for bio-hybrid actuation. We described the fabrication of engineered bilayers, organized in a 3D architecture by means of a stress-induced rolling membrane technique. Such structures were provided with ad hoc surface topographies, for both cell alignment and cell survival after membrane rolling. We reported the results of advanced finite element model simulations, predicting the system behavior in terms of overall contraction, induced by the contractile activity of muscle cells seeded on the membrane. Then, we tested in vitro the structure with primary cardiomyocytes to evaluate the real bio-actuator contraction, thus validating the simulation results. At a later stage, we provided the samples with a stable fibronectin coating, by covalently binding the protein on the polymer surface, thus enabling long-term cultures with C2C12 skeletal muscle cells, a more controllable cell type. These tests revealed cell viability and alignment on the rolled structures, but also the ability of cells to differentiate and to form multinucleated and oriented myotubes on the polymer surface, also supported by a fibroblast feeder layer. Our results highlighted the possibility of developing 3D rolled PDMS structures, characterized by different mechanical properties, as novel bio-hybrid actuators.

  9. Probing the 2D temperature structure of protoplanetary disks with Herschel observations of high-J CO lines

    NASA Astrophysics Data System (ADS)

    Fedele, D.; van Dishoeck, E. F.; Kama, M.; Bruderer, S.; Hogerheijde, M. R.

    2016-06-01

    The gas temperature structure of protoplanetary disks is a key ingredient for interpreting various disk observations and for quantifying the subsequent evolution of these systems. The comparison of low- and mid-J CO rotational lines is a powerful tool for assessing the temperature gradient in the warm molecular layer of disks. Spectrally resolved high-J (Ju> 14) CO lines probe intermediate distances and heights from the star that are not sampled by (sub-)millimeter CO spectroscopy. This paper presents new Herschel/HIFI and archival PACS observations of 12CO, 13CO, and [C ii] emission in four Herbig AeBe disks (HD 100546, HD 97048, IRS 48, HD 163296) and three T Tauri disks (AS 205, S CrA, TW Hya). In the case of the T Tauri systems AS 205 and S CrA, the CO emission has a single-peaked profile, likely due to a slow wind. For all the other systems, the Herschel CO spectra are consistent with pure disk emission and the spectrally resolved lines (HIFI) and the CO rotational ladder (PACS) are analyzed simultaneously assuming power-law temperature and column density profiles, using the velocity profile to locate the emission in the disk. The temperature profile varies substantially from disk to disk. In particular, Tgas in the disk surface layers can differ by up to an order of magnitude among the four Herbig AeBe systems; HD 100546 is the hottest and HD 163296 the coldest disk in the sample. Clear evidence of a warm disk layer where Tgas>Tdust is found in all the Herbig Ae disks. The observed CO fluxes and line profiles are compared to predictions of physical-chemical models. The primary parameters affecting the disk temperature structure are the flaring angle, the gas-to-dust mass ratio, the scale height, and the dust settling.

  10. Persistent Structures in the Turbulent Boundary Layer

    NASA Technical Reports Server (NTRS)

    Palumbo, Dan; Chabalko, Chris

    2005-01-01

    Persistent structures in the turbulent boundary layer are located and analyzed. The data are taken from flight experiments on large commercial aircraft. An interval correlation technique is introduced which is able to locate the structures. The Morlet continuous wavelet is shown to not only locates persistent structures but has the added benefit that the pressure data are decomposed in time and frequency. To better understand how power is apportioned among these structures, a discrete Coiflet wavelet is used to decompose the pressure data into orthogonal frequency bands. Results indicate that some structures persist a great deal longer in the TBL than would be expected. These structure contain significant power and may be a primary source of vibration energy in the airframe.

  11. Pseudocapacitive Na-Ion Storage Boosts High Rate and Areal Capacity of Self-Branched 2D Layered Metal Chalcogenide Nanoarrays.

    PubMed

    Chao, Dongliang; Liang, Pei; Chen, Zhen; Bai, Linyi; Shen, He; Liu, Xiaoxu; Xia, Xinhui; Zhao, Yanli; Savilov, Serguei V; Lin, Jianyi; Shen, Ze Xiang

    2016-11-22

    The abundant reserve and low cost of sodium have provoked tremendous evolution of Na-ion batteries (SIBs) in the past few years, but their performances are still limited by either the specific capacity or rate capability. Attempts to pursue high rate ability with maintained high capacity in a single electrode remains even more challenging. Here, an elaborate self-branched 2D SnS2 (B-SnS2) nanoarray electrode is designed by a facile hot bath method for Na storage. This interesting electrode exhibits areal reversible capacity of ca. 3.7 mAh cm(-2) (900 mAh g(-1)) and rate capability of 1.6 mAh cm(-2) (400 mAh g(-1)) at 40 mA cm(-2) (10 A g(-1)). Improved extrinsic pseudocapacitive contribution is demonstrated as the origin of fast kinetics of an alloying-based SnS2 electrode. Sodiation dynamics analysis based on first-principles calculations, ex-situ HRTEM, in situ impedance, and in situ Raman technologies verify the S-edge effect on the fast Na(+) migration and reversible and sensitive structure evolution during high-rate charge/discharge. The excellent alloying-based pseudocapacitance and unsaturated edge effect enabled by self-branched surface nanoengineering could be a promising strategy for promoting development of SIBs with both high capacity and high rate response.

  12. Prediction of P53 Mutants (Multiple Sites) Transcriptional Activity Based on Structural (2D&3D) Properties

    PubMed Central

    Geetha Ramani, R.; Jacob, Shomona Gracia

    2013-01-01

    Prediction of secondary site mutations that reinstate mutated p53 to normalcy has been the focus of intense research in the recent past owing to the fact that p53 mutants have been implicated in more than half of all human cancers and restoration of p53 causes tumor regression. However laboratory investigations are more often laborious and resource intensive but computational techniques could well surmount these drawbacks. In view of this, we formulated a novel approach utilizing computational techniques to predict the transcriptional activity of multiple site (one-site to five-site) p53 mutants. The optimal MCC obtained by the proposed approach on prediction of one-site, two-site, three-site, four-site and five-site mutants were 0.775,0.341,0.784,0.916 and 0.655 respectively, the highest reported thus far in literature. We have also demonstrated that 2D and 3D features generate higher prediction accuracy of p53 activity and our findings revealed the optimal results for prediction of p53 status, reported till date. We believe detection of the secondary site mutations that suppress tumor growth may facilitate better understanding of the relationship between p53 structure and function and further knowledge on the molecular mechanisms and biological activity of p53, a targeted source for cancer therapy. We expect that our prediction methods and reported results may provide useful insights on p53 functional mechanisms and generate more avenues for utilizing computational techniques in biological data analysis. PMID:23468845

  13. Structure and dynamics of layered molecular assemblies

    NASA Astrophysics Data System (ADS)

    Horne, Jennifer Conrad

    This dissertation focuses on the goal of understanding and controlling layered material properties from a molecular perspective. With this understanding, materials can be synthetically tailored to exhibit predetermined bulk properties. This investigation describes the optical response of a family of metal-phosphonate (MP) monolayers and multilayers, materials that are potentially useful because the films are easy to synthesize and are chemically and thermally stable. MP films have shown potential in a variety of chemical sensing and optical applications, and in this dissertation, the suitability of MP films for optical information storage is explored For this application, the extent of photonic energy transport within and between optically active layers is an important factor in determining the stability and specificity of optical modifications made to a material. Intralayer and interlayer energy transport processes can be studied selectively in MP films because the composition, and thus the properties, of each layer are controlled synthetically. It was determined by fluorescence relaxation dynamics in conjunction with atomic force microscopy (AFM) that the substrate and layer morphologies are key factors in determining the layer optical and physical properties. The initial MP layers in a multilayer are structurally heterogeneous, characterized by randomly distributed islands that are ~50 A in diameter. The population dynamics measured for these layers are non-exponential, chromophore concentration-independent, and identical for two different chromophores. The data is explained in the context of an excitation hopping model in a system where the surface is characterized by islands of aggregated chromophores as well as non-aggregated monomers. Within a MP monolayer, the dynamics are dominated by intra-island excitation hopping. Forster (dipolar) energy transfer between the energetically overlapped chromophores does not play a significant role in determining the

  14. Plane mixing layer vortical structure kinematics

    NASA Technical Reports Server (NTRS)

    Leboeuf, Richard L.

    1993-01-01

    The objective of the current project was to experimentally investigate the structure and dynamics of the streamwise vorticity in a plane mixing layer. The first part of this research program was intended to clarify whether the observed decrease in mean streamwise vorticity in the far-field of mixing layers is due primarily to the 'smearing' caused by vortex meander or to diffusion. Two-point velocity correlation measurements have been used to show that there is little spanwise meander of the large-scale streamwise vortical structure. The correlation measurements also indicate a large degree of transverse meander of the streamwise vorticity which is not surprising since the streamwise vorticity exists in the inclined braid region between the spanwise vortex core regions. The streamwise convection of the braid region thereby introduces an apparent transverse meander into measurements using stationary probes. These results corroborated with estimated secondary velocity profiles in which the streamwise vorticity produces a signature which was tracked in time.

  15. 2D-ELDOR study of heterogeneity and domain structure changes in plasma membrane vesicles upon cross-linking of receptors.

    PubMed

    Chiang, Yun-Wei; Costa-Filho, Antonio J; Baird, Barbara; Freed, Jack H

    2011-09-08

    2D electron-electron double resonance (2D-ELDOR) with the "full Sc-" method of analysis is applied to the study of plasma membrane vesicles. Membrane structural changes upon antigen cross-linking of IgE receptors (IgE-FcεRI) in plasma membrane vesicles (PMVs) isolated from RBL-2H3 mast cells are investigated, for the first time, by means of these 2D-ELDOR techniques. Spectra of 1-palmitoyl-2-(16-doxyl stearoyl) phosphatidylcholine (16-PC) from PMVs before and after this stimulation at several temperatures are reported. The results demonstrate a coexistence of liquid-ordered (L(o)) and liquid-disordered (L(d)) components. We find that upon cross-linking, the membrane environment is remodeled to become more disordered, as shown by a moderate increase in the population of the L(d) component. This change in the relative amount of the L(o) versus L(d) components upon cross-linking is consistent with a model wherein the IgE receptors, which when clustered by antigen to cause cell stimulation, lead to more disordered lipids, and their dynamic and structural properties are slightly altered. This study demonstrates that 2D-ELDOR, analyzed by the full Sc- method, is a powerful approach for capturing the molecular dynamics in biological membranes. This is a particular case showing how 2D-ELDOR can be applied to study physical processes in complex systems that yield subtle changes.

  16. Gold-induced nanowires on the Ge(100) surface yield a 2D and not a 1D electronic structure

    NASA Astrophysics Data System (ADS)

    de Jong, N.; Heimbuch, R.; Eliëns, S.; Smit, S.; Frantzeskakis, E.; Caux, J.-S.; Zandvliet, H. J. W.; Golden, M. S.

    2016-06-01

    Atomic nanowires on semiconductor surfaces induced by the adsorption of metallic atoms have attracted a lot of attention as possible hosts of the elusive, one-dimensional Tomonaga-Luttinger liquid. The Au/Ge(100) system in particular is the subject of controversy as to whether the Au-induced nanowires do indeed host exotic, 1D (one-dimensional) metallic states. In light of this debate, we report here a thorough study of the electronic properties of high quality nanowires formed at the Au/Ge(100) surface. The high-resolution ARPES data show the low-lying Au-induced electronic states to possess a dispersion relation that depends on two orthogonal directions in k space. Comparison of the E (kx,ky) surface measured using high-resolution ARPES to tight-binding calculations yields hopping parameters in the two different directions that differ by approximately factor of two. Additionally, by pinpointing the Au-induced surface states in the first, second, and third surface Brillouin zones and analyzing their periodicity in k||, the nanowire propagation direction seen clearly in STM can be imported into the ARPES data. We find that the larger of the two hopping parameters corresponds, in fact, to the direction perpendicular to the nanowires (tperp). This proves that the Au-induced electron pockets possess a two-dimensional, closed Fermi surface, and this firmly places the Au/Ge(100) nanowire system outside potential hosts of a Tomonaga-Luttinger liquid. We combine these ARPES data with scanning tunneling spectroscopic measurements of the spatially resolved electronic structure and find that the spatially straight—wirelike—conduction channels observed up to energies of order one electron volt below the Fermi level do not originate from the Au-induced states seen in the ARPES data. The former are rather more likely to be associated with bulk Ge states that are localized to the subsurface region. Despite our proof of the 2D (two-dimentional) nature of the Au

  17. Flow visualization of turbulent boundary layer structure

    NASA Astrophysics Data System (ADS)

    Head, M. R.; Bandyopadhyay, P.

    1980-01-01

    The results from flow visualization experiments performed using an argon-ion laser to illuminate longitudinal and transverse sections of the smoke filled boundary layer in zero pressure gradient are discussed. Most of the experiments were confined to the range 600 Re sub theta 10,000. Results indicate that the boundary layer consists almost exclusively of vortex loops or hairpins, some of which may extend through the complete boundary layer thickness and all of which are inclined at a more or less constant characteristic angle of approximately 45 deg to the wall. Since the cross-stream dimensions of the hairpins appear to scale roughly with the wall variables U sub tau and nu, while their length is limited only by the boundary layer thickness, there are very large scale effects on the turbulence structure. At high Reynolds numbers (Re sub theta = 10,000) there is little evidence of large-scale coherent motions, other than a slow overturning of random agglomerations of the hairpins just mentioned.

  18. PbnI4n+2(2n+2)- ribbons (n = 3, 5) as dimensional reductions of 2D perovskite layers in cystamine cation based hybrids, also incorporating iodine molecules or reversible guest water molecules.

    PubMed

    Louvain, Nicolas; Bi, Wenhua; Mercier, Nicolas; Buzaré, Jean-Yves; Legein, Christophe; Corbel, Gwenaël

    2007-03-07

    Pb(n)I(4n+2)((2n+2)-) (n = 3, 5) ribbons, which can be regarded as dimensional reductions of 2D perovskite layers, are stabilized by diprotonated cystamine cations in (NH(3)(CH(2))(2)SS(CH(2))(2)NH(3))(4)Pb(3)I(14),I(2) (1) and (NH(3)(CH(2))(2)SS(CH(2))(2)NH(3))(6)Pb(5)I(22).4H(2)O (2). Both 1 and 2 have interesting structural characteristics; it is unprecedented that the ribbons are linked via I(2) molecules incorporated in the lattice of 1, while tetrameric water clusters are trapped in the structure of 2. 2 undergoes a (reversible) water desorption process at 310 K leading to (NH(3)(CH(2))(2)SS(CH(2))(2)NH(3))(6)Pb(5)I(22).2H(2)O (3). The electrical behavior of 2 and 3 has been investigated in the ranges 293-310 K and 310-358 K respectively. Above 310 K, the electronic contribution remains constant while the ionic transference number tends towards unity showing almost pure ionic transport at 360 K (6 x 10(-7) S cm(-1) at 330 K) originating probably from the migration of protons through the hydrogen bonds connecting the water molecules to the cystamine counter cations.

  19. Wannier-Stark electro-optical effect, quasi-guided and photonic modes in 2D macroporous silicon structures with SiO2 coatings

    NASA Astrophysics Data System (ADS)

    Karachevtseva, L.; Goltviansky, Yu.; Sapelnikova, O.; Lytvynenko, O.; Stronska, O.; Bo, Wang; Kartel, M.

    2016-12-01

    Opportunities to enhance the properties of structured surfaces were demonstrated on 2D macroporous silicon structures with SiO2 coatings. We investigated the IR light absorption oscillations in macroporous silicon structures with SiO2 coatings 0-800 nm thick. The Wannier-Stark electro-optical effect due to strong electric field on Si-SiO2boundary and an additional electric field of quasi-guided optical modes were taken into account. The photonic modes and band gaps were also considered as peculiarities in absorbance spectra of macroporous silicon structures with a thick SiO2 coating. The photonic modes do not coincide with the quasi-guided modes in the silicon matrix and do not appear in absorption spectra of 2D macroporous silicon structures with surface nanocrystals.

  20. Residue-Specific Structural Kinetics of Proteins through the Union of Isotope Labeling, Mid-IR Pulse Shaping, and Coherent 2D IR Spectroscopy

    PubMed Central

    Middleton, Chris T.; Woys, Ann Marie; Mukherjee, Sudipta S.; Zanni, Martin T.

    2010-01-01

    We describe a methodology for studying protein kinetics using a rapid-scan technology for collecting 2D IR spectra. In conjunction with isotope labeling, 2D IR spectroscopy is able to probe the secondary structure and environment of individual residues in polypeptides and proteins. It is particularly useful for membrane and aggregate proteins. Our rapid-scan technology relies on a mid-IR pulse shaper that computer generates the pulse shapes, much like in an NMR spectrometer. With this device, data collection is faster, easier, and more accurate. We describe our 2D IR spectrometer, as well as protocols for 13C=18O isotope labeling, and then illustrate the technique with an application to the aggregation of the human islet amyloid polypeptide form type 2 diabetes. PMID:20472067

  1. Discrimination of adulterated milk based on two-dimensional correlation spectroscopy (2D-COS) combined with kernel orthogonal projection to latent structure (K-OPLS).

    PubMed

    Yang, Renjie; Liu, Rong; Xu, Kexin; Yang, Yanrong

    2013-12-01

    A new method for discrimination analysis of adulterated milk and pure milk is proposed by combining two-dimensional correlation spectroscopy (2D-COS) with kernel orthogonal projection to latent structure (K-OPLS). Three adulteration types of milk with urea, melamine, and glucose were prepared, respectively. The synchronous 2D spectra of adulterated milk and pure milk samples were calculated. Based on the characteristics of 2D correlation spectra of adulterated milk and pure milk, a discriminant model of urea-tainted milk, melamine-tainted milk, glucose-tainted milk, and pure milk was built by K-OPLS. The classification accuracy rates of unknown samples were 85.7, 92.3, 100, and 87.5%, respectively. The results show that this method has great potential in the rapid discrimination analysis of adulterated milk and pure milk.

  2. 2D modeling of DC potential structures induced by RF sheaths with transverse currents in front of ICRF antenna

    SciTech Connect

    Faudot, E.; Heuraux, S.; Colas, L.

    2005-09-26

    Understanding DC potential generation in front of ICRF antennas is crucial for long pulse high RF power systems. DC potentials are produced by sheath rectification of these RF potentials. To reach this goal, near RF parallel electric fields have to be computed in 3D and integrated along open magnetic field lines to yield a 2D RF potential map in a transverse plane. DC potentials are produced by sheath rectification of these RF potentials. As RF potentials are spatially inhomogeneous, transverse polarization currents are created, modifying RF and DC maps. Such modifications are quantified on a 'test map' having initially a Gaussian shape and assuming that the map remains Gaussian near its summit,the time behavior of the peak can be estimated analytically in presence of polarization current as a function of its width r0 and amplitude {phi}0 (normalized to a characteristic length for transverse transport and to the local temperature). A 'peaking factor' is built from the DC peak potential normalized to {phi}0, and validated with a 2D fluid code and a 2D PIC code (XOOPIC). In an unexpected way transverse currents can increase this factor. Realistic situations of a Tore Supra antenna are also studied, with self-consistent near fields provided by ICANT code. Basic processes will be detailed and an evaluation of the 'peaking factor' for ITER will be presented for a given configuration.

  3. Interfacial engineering of two-dimensional nano-structured materials by atomic layer deposition

    NASA Astrophysics Data System (ADS)

    Zhuiykov, Serge; Kawaguchi, Toshikazu; Hai, Zhenyin; Karbalaei Akbari, Mohammad; Heynderickx, Philippe M.

    2017-01-01

    Atomic Layer Deposition (ALD) is an enabling technology which provides coating and material features with significant advantages compared to other existing techniques for depositing precise nanometer-thin two-dimensional (2D) nanostructures. It is a cyclic process which relies on sequential self-terminating reactions between gas phase precursor molecules and a solid surface. ALD is especially advantageous when the film quality or thickness is critical, offering ultra-high aspect ratios. ALD provides digital thickness control to the atomic level by depositing film one atomic layer at a time, as well as pinhole-free films even over a very large and complex areas. Digital control extends to sandwiches, hetero-structures, nano-laminates, metal oxides, graded index layers and doping, and it is perfect for conformal coating and challenging 2D electrodes for various functional devices. The technique's capabilities are presented on the example of ALD-developed ultra-thin 2D tungsten oxide (WO3) over the large area of standard 4" Si substrates. The discussed advantages of ALD enable and endorse the employment of this technique for the development of hetero-nanostructure 2D semiconductors with unique properties.

  4. The structure of salt bridges between Arg(+) and Glu(-) in peptides investigated with 2D-IR spectroscopy: Evidence for two distinct hydrogen-bond geometries.

    PubMed

    Huerta-Viga, Adriana; Amirjalayer, Saeed; Domingos, Sérgio R; Meuzelaar, Heleen; Rupenyan, Alisa; Woutersen, Sander

    2015-06-07

    Salt bridges play an important role in protein folding and in supramolecular chemistry, but they are difficult to detect and characterize in solution. Here, we investigate salt bridges between glutamate (Glu(-)) and arginine (Arg(+)) using two-dimensional infrared (2D-IR) spectroscopy. The 2D-IR spectrum of a salt-bridged dimer shows cross peaks between the vibrational modes of Glu(-) and Arg(+), which provide a sensitive structural probe of Glu(-)⋯Arg(+) salt bridges. We use this probe to investigate a β-turn locked by a salt bridge, an α-helical peptide whose structure is stabilized by salt bridges, and a coiled coil that is stabilized by intra- and intermolecular salt bridges. We detect a bidentate salt bridge in the β-turn, a monodentate one in the α-helical peptide, and both salt-bridge geometries in the coiled coil. To our knowledge, this is the first time 2D-IR has been used to probe tertiary side chain interactions in peptides, and our results show that 2D-IR spectroscopy is a powerful method for investigating salt bridges in solution.

  5. The structure of salt bridges between Arg+ and Glu- in peptides investigated with 2D-IR spectroscopy: Evidence for two distinct hydrogen-bond geometries

    NASA Astrophysics Data System (ADS)

    Huerta-Viga, Adriana; Amirjalayer, Saeed; Domingos, Sérgio R.; Meuzelaar, Heleen; Rupenyan, Alisa; Woutersen, Sander

    2015-06-01

    Salt bridges play an important role in protein folding and in supramolecular chemistry, but they are difficult to detect and characterize in solution. Here, we investigate salt bridges between glutamate (Glu-) and arginine (Arg+) using two-dimensional infrared (2D-IR) spectroscopy. The 2D-IR spectrum of a salt-bridged dimer shows cross peaks between the vibrational modes of Glu- and Arg+, which provide a sensitive structural probe of Glu-⋯Arg+ salt bridges. We use this probe to investigate a β-turn locked by a salt bridge, an α-helical peptide whose structure is stabilized by salt bridges, and a coiled coil that is stabilized by intra- and intermolecular salt bridges. We detect a bidentate salt bridge in the β-turn, a monodentate one in the α-helical peptide, and both salt-bridge geometries in the coiled coil. To our knowledge, this is the first time 2D-IR has been used to probe tertiary side chain interactions in peptides, and our results show that 2D-IR spectroscopy is a powerful method for investigating salt bridges in solution.

  6. Isolation and structural and pharmacological characterization of α-elapitoxin-Dpp2d, an amidated three finger toxin from black mamba venom.

    PubMed

    Wang, Ching-I Anderson; Reeks, Timothy; Vetter, Irina; Vergara, Irene; Kovtun, Oleksiy; Lewis, Richard J; Alewood, Paul F; Durek, Thomas

    2014-06-17

    We isolated a novel, atypical long-chain three-finger toxin (TFT), α-elapitoxin-Dpp2d (α-EPTX-Dpp2d), from black mamba (Dendroaspis polylepis polylepis) venom. Proteolytic digestion with trypsin and V8 protease, together with MS/MS de novo sequencing, indicated that the mature toxin has an amidated C-terminal arginine, a posttranslational modification rarely observed for snake TFTs. α-EPTX-Dpp2d was found to potently inhibit α7 neuronal nicotinic acetylcholine receptors (nAChR; IC₅₀, 58 ± 24 nM) and muscle-type nAChR (IC₅₀, 114 ± 37 nM) but did not affect α3β2 and α3β4 nAChR isoforms at 1 μM concentrations. Competitive radioligand binding assays demonstrated that α-EPTX-Dpp2d competes with epibatidine binding to the Lymnea stagnalis acetylcholine-binding protein (Ls-AChBP; IC₅₀, 4.9 ± 2.3 nM). The activity profile and binding data are reminiscent of classical long-chain TFTs with a free carboxyl termini, suggesting that amidation does not significantly affect toxin selectivity. The crystal structure of α-EPTX-Dpp2d was determined at 1.7 Å resolution and displayed a dimeric toxin assembly with each monomer positioned in an antiparallel orientation. The dimeric structure is stabilized by extensive intermolecular hydrogen bonds and electrostatic interactions, which raised the possibility that the toxin may exist as a noncovalent homodimer in solution. However, chemical cross-linking and size-exclusion chromatography coupled with multiangle laser light scattering (MALLS) data indicated that the toxin is predominantly monomeric under physiological conditions. Because of its high potency and selectivity, we expect this toxin to be a valuable pharmacological tool for studying the structure and function of nAChRs.

  7. revealing H{sub 2}D{sup +} depletion and compact structure in starless and protostellar cores with ALMA

    SciTech Connect

    Friesen, R. K.; Di Francesco, J.; Bourke, T. L.; Caselli, P.; Jørgensen, J. K.; Pineda, J. E.; Wong, M.

    2014-12-10

    We present Atacama Large Millimeter/submillimeter Array (ALMA) observations of the submillimeter dust continuum and H{sub 2}D{sup +} 1{sub 10}-1{sub 11} emission toward two evolved, potentially protostellar cores within the Ophiuchus molecular cloud, Oph A SM1 and SM1N. The data reveal small-scale condensations within both cores, with mass upper limits of M ≲ 0.02 M {sub ☉} (∼20 M {sub Jup}). The SM1 condensation is consistent with a nearly symmetric Gaussian source with a width of only 37 AU. The SM1N condensation is elongated and extends 500 AU along its major axis. No evidence for substructure is seen in either source. A Jeans analysis indicates that these sources are unlikely to fragment, suggesting that both will form single stars. H{sub 2}D{sup +} is only detected toward SM1N, offset from the continuum peak by ∼150-200 AU. This offset may be due to either heating from an undetected, young, low-luminosity protostellar source or first hydrostatic core, or HD (and consequently H{sub 2}D{sup +}) depletion in the cold center of the condensation. We propose that SM1 is protostellar and that the condensation detected by ALMA is a warm (T ∼ 30-50 K) accretion disk. The less concentrated emission of the SM1N condensation suggests that it is still starless, but we cannot rule out the presence of a low-luminosity source, perhaps surrounded by a pseudodisk. These data observationally reveal the earliest stages of the formation of circumstellar accretion regions and agree with theoretical predictions that disk formation can occur very early in the star formation process, coeval with or just after the formation of a first hydrostatic core or protostar.

  8. Hamiltonian structure of Dubrovin{close_quote}s equation of associativity in 2-d topological field theory

    SciTech Connect

    Galvao, C.A.; Nutku, Y.

    1996-12-01

    mA third order Monge-Amp{grave e}re type equation of associativity that Dubrovin has obtained in 2-d topological field theory is formulated in terms of a variational principle subject to second class constraints. Using Dirac{close_quote}s theory of constraints this degenerate Lagrangian system is cast into Hamiltonian form and the Hamiltonian operator is obtained from the Dirac bracket. There is a new type of Kac-Moody algebra that corresponds to this Hamiltonian operator. In particular, it is not a W-algebra. {copyright} {ital 1996 American Institute of Physics.}

  9. S4 : A free electromagnetic solver for layered periodic structures

    NASA Astrophysics Data System (ADS)

    Liu, Victor; Fan, Shanhui

    2012-10-01

    We describe S4, a free implementation of the Fourier modal method (FMM), which has also been commonly referred to as rigorous coupled wave analysis (RCWA), for simulating electromagnetic propagation through 3D structures with 2D periodicity. We detail design aspects that allow S4 to be a flexible platform for these types of simulations. In particular, we highlight the ability to select different FMM formulations, user scripting, and extensibility of program capabilities for eigenmode computations. Program summary Program title: S4 Catalogue identifier: AEMO_v1_0. Program summary URL: http://cpc.cs.qub.ac.uk/summaries/AEMO_v1_0..html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: GNU General Public License, version 2 No. of lines in distributed program, including test data, etc.: 56910 No. of bytes in distributed program, including test data, etc.: 433883 Distribution format: Programming language: C, C++. Computer: Any computer with a Unix-like environment and a C++ compiler. Developed on 2.3 GHz AMD Phenom 9600. Operating system: Any Unix-like environment; developed under MinGW32 on Windows 7. Has the code been vectorized or parallelized?: Yes. Parallelized using MPI. RAM: Problem dependent (linearly proportional to number of layers and quadratic in number of Fourier components). A single layer calculation with approximately 100 Fourier components uses approximately 10 MB. Classification: 10. Electrostatics and Electromagnetics. External routines: Lua [1] and optionally exploits additional free software packages: FFTW [2], CHOLMOD [3], MPI message-passing interface [4], LAPACK and BLAS linear-algebra software [5], and Kiss FFT [6]. Nature of problem: Time-harmonic electromagnetism in layered bi-periodic structures. Solution method: The Fourier modal method (rigorous coupled wave analysis) and the scattering matrix method. Running time: Problem dependent and highly dependent on quality of the BLAS

  10. Structures and Crystal Chemistry of Layered Materials

    NASA Astrophysics Data System (ADS)

    Partin, Daniel Edward

    The crystal chemistry of several layered materials has been explored using a variety of methods, with an emphasis on their structural aspects. In the second part of this work, the structure of several copper oxides that are of significance to the study of superconductors are described. The crystal structures of MgCl_2 and CdCl_2 have been refined using powder X-ray diffraction data. They have the space group Roverline{3}m. For magnesium chloride the unit cell constants are a = 3.6363(1) A, c = 17.6663(5) A. For cadmium chloride they are a = 3.8459(1) A, c = 17.4931(4) A. The structures and their relationship to that of fluorite are discussed within the framework of a Born-Mayer model. The crystal structure of Mg(OD)_2 has been refined from time-of flight (TOF) neutron diffraction data and found to be trigonal, Poverline {3}m1, a = 3.1455(1) A, c = 4.7646(3) A. The data were collected at 305 K. The O-D bond length is 0.937 (1) A (corrected for "riding" motion 0.948 A). An infrared/Raman study of Mg(OH)_2 was conducted in a diamond anvil cell in the pressure range from room pressure up to 7 Gpa. For layered crystals, it was found that as the internally fixed layers are moved apart the Madelung energy of the system becomes constant after a very short distance, although not necessarily that of the given crystal's energy at ambient conditions. The crystal structure of Sr(OD)_2 has been refined from time-of-flight neutron diffraction data and the deuterium positions found. Strontium deuteroxide crystallizes in the space group Pnma, with the unit cell constants of a = 9.8269(5) A, b = 3.9051(2) A, and c = 6.0733(3) A. The crystal structures of SrCuO_2 and Sr_2CuO_3 have been refined by time-of-flight neutron diffraction. For SrCuO_2 the space group is Cmcm, a = 3.57002(2), b = 16.32268(8), c = 3.91100(2); for Sr _2CuO_3 the space group is Immm, a = 3.49900(5), b = 12.7009(2), c = 3.91120(5). In both structures the strontium atoms are coordinated by seven oxygen atoms

  11. Wavy structures in compressible mixing layers

    NASA Astrophysics Data System (ADS)

    Chen, Jun; Shi, Xiao-Tian; Wang, Tie-Jin; She, Zhen-Su

    2013-10-01

    Semi-periodic structures namely inclined wavy structures (IWS) are experimentally observed in compressible mixing layers at two convective Mach numbers ( M c = 0.11 and 0.47). Flow structures are visualized by the laserinduced planar laser Mie scattering (PLMS) technique. Two methods are developed to investigate the spatial distribution and geometry of IWS: (1) the dominant mode extraction (DME) method, to extract the dominant modes of IWS from the streamwise gray-level fluctuation, and (2) the phase tracking (PT) method, to identify the shape of IWS. The results suggest that pressure perturbations account for the formation of IWS in the initialmixing region and the joint effect of dilatation and coherent vortices enhances IWS in the welldeveloped region. The large transverse (cross-flow) scale of the IWS and their relation to coherent vortices (CV) indicate that the disturbance originated from CV in the mixing center propagates far into the free streams. The DME and the PT method are shown to be the effective tools to study the geometrical features of wavy structures in compressible shear flows.

  12. Observation of ferromagnetic and antiferromagnetic coupling in 1-D and 2-D extended structures of copper(II) terephthalates

    SciTech Connect

    Deakin, L.; Arif, A.M.; Miller, J.S.

    1999-11-01

    The reaction between CuCl{sub 2}{center{underscore}dot}2H{sub 2}O and disodium terephthalate, Na{sub 2}tp, in aqueous solution simultaneously produces chain, bis(aqua)[{mu}-(terephthalato-{kappa}O:{kappa}O{prime})]copper(II), monohydrate, Cutp(OH{sub 2}){sub 2}{center{underscore}dot}H{sub 2}O (1), and layered, bis(aqua)[{mu}-(terephthalato-{kappa}O)]copper(II), Cutp(OH{sub 2}){sub 2} (2), structured materials. 1 (C{sub 8}H{sub 10}CuO{sub 7}) belongs to the orthorhombic P2{sub 1}2{sub 1}2 space group [a = 6.3015(4) {angstrom}, b = 6.8743(4) {angstrom}, c = 22.9972(14) {angstrom}, and Z = 4] and incorporates tp in a bridging bis-monodentate binding mode and Cu(II) in a tetragonally elongated octahedron. 2 (C{sub 8}H{sub 10}CuO{sub 6}) which belongs to the orthorhombic Pmc2{sub 1} space group [a = 10.7421(8) {angstrom}, b = 7.2339(10) {angstrom}, c = 5.7143(13) {angstrom}, and Z = 2] incorporates tp in a mono-bidentate binding mode and Cu(II) in a distorted square pyramid. 1 and 2 exhibit axial X-band powder EPR spectra with G{sub {perpendicular}} = 2.08, g{sub {parallel}} = 2.29 (1) and g{sub {perpendicular}} = 2.07, g{sub {parallel}} = 2.29 (2) at 300 K. 1 obeys the Curie-Weiss law at high temperatures ({theta} = {minus}7.2 K) and at low temperatures behaves as 1-D magnetic chains with an exchange-coupling constant of J/k{sub B} = {minus}9.15 K (H = {minus}2JS{sub 1}{center{underscore}dot}S{sub 2}). This material displays a spontaneous moment below 2 K under small applied magnetic fields, consistent with the presence of spin canting. 2 exhibits ferromagnetic interactions with {theta} = +0.8 K. Along the 1-D chain where coordinated water forms the bridge between metal centers, the coupling between Cu(II) is J/k{sub B} = +0.6 K. The fit of the magnetic susceptibility for 2 using a molecular field correction, which takes into consideration antiferromagnetic interactions between chains via the tp ligand, yields J{prime}/k{sub B} = {minus}0.13 K.

  13. Two-dimensional (2D) infrared correlation study of the structural characterization of a surface immobilized polypeptide film stimulated by pH

    NASA Astrophysics Data System (ADS)

    Chae, Boknam; Son, Seok Ho; Kwak, Young Jun; Jung, Young Mee; Lee, Seung Woo

    2016-11-01

    The pH-induced structural changes to surface immobilized poly (L-glutamic acid) (PLGA) films were examined by Fourier transform infrared (FTIR) spectroscopy and two-dimensional (2D) correlation analysis. Significant spectral changes were observed in the FTIR spectra of the surface immobilized PLGA film between pH 6 and 7. The 2D correlation spectra constructed from the pH-dependent FTIR spectra of the surface immobilized PLGA films revealed the spectral changes induced by the alternations of the protonation state of the carboxylic acid group in the PLGA side chain. When the pH was increased from 6 to 8, weak spectral changes in the secondary structure of the PLGA main chain were induced by deprotonation of the carboxylic acid side group.

  14. Unraveling the dynamics and structure of functionalized self-assembled monolayers on gold using 2D IR spectroscopy and MD simulations

    PubMed Central

    Yan, Chang; Yuan, Rongfeng; Pfalzgraff, William C.; Nishida, Jun; Wang, Lu; Markland, Thomas E.; Fayer, Michael D.

    2016-01-01

    Functionalized self-assembled monolayers (SAMs) are the focus of ongoing investigations because they can be chemically tuned to control their structure and dynamics for a wide variety of applications, including electrochemistry, catalysis, and as models of biological interfaces. Here we combine reflection 2D infrared vibrational echo spectroscopy (R-2D IR) and molecular dynamics simulations to determine the relationship between the structures of functionalized alkanethiol SAMs on gold surfaces and their underlying molecular motions on timescales of tens to hundreds of picoseconds. We find that at higher head group density, the monolayers have more disorder in the alkyl chain packing and faster dynamics. The dynamics of alkanethiol SAMs on gold are much slower than the dynamics of alkylsiloxane SAMs on silica. Using the simulations, we assess how the different molecular motions of the alkyl chain monolayers give rise to the dynamics observed in the experiments. PMID:27044113

  15. Structures and Luminescent Properties of Two 2D Coordination Polymers Containing Tb(III) or Dy(III) Ions.

    PubMed

    An, Xiaoping; Wang, Hongsheng; Li, Gongchun

    2014-03-01

    Two 2D rare earth terbium and dysprosium coordination polymers with 2,4-pyridinedicarboxylate and oxalate anions have been synthesized by hydrothermal method, the formula is {[RE(pda)(ox)0.5(H2O)4]·2H2O}n (RE = Tb (1) and Dy (2); H2pda = 2,4-pyridinedicarboxylic acid; ox = oxalate anion). The two complexes are isomorphic and crystallized in monoclinic system, P21/c space group. Each pda anion connects two rare earth ions with 2- carboxyl group and the nitrogen atom but the 4- carboxyl group does not coordinate with rare earth ions. Each ox anion connects two rare earth ions by μ 2-bridge way. Both the complexes exhibit intense characteristic luminescence of Tb(III) or Dy(III) ion with excitation of UV-rays.

  16. One-atom-thick 2D copper oxide clusters on graphene.

    PubMed

    Kano, Emi; Kvashnin, Dmitry G; Sakai, Seiji; Chernozatonskii, Leonid A; Sorokin, Pavel B; Hashimoto, Ayako; Takeguchi, Masaki

    2017-03-17

    The successful isolation and remarkable properties of graphene have recently triggered investigation of two-dimensional (2D) materials from layered compounds; however, one-atom-thick 2D materials without bulk layered counterparts are scarcely reported. Here we report the structure and properties of novel 2D copper oxide studied by experimental and theoretical methods. Electron microscopy observations reveal that copper oxide can form monoatomic layers with an unusual square lattice on graphene. Density functional theory calculations suggest that oxygen atoms at the centre of the square lattice stabilizes the 2D Cu structure, and that the 2D copper oxide sheets have unusual electronic and magnetic properties different from 3D bulk copper oxide.

  17. A Structure-Activity Relationship Study of Imidazole-5-Carboxylic Acid Derivatives as Angiotensin II Receptor Antagonists Combining 2D and 3D QSAR Methods.

    PubMed

    Sharma, Mukesh C

    2016-03-01

    Two-dimensional (2D) and three-dimensional (3D) quantitative structure-activity relationship (QSAR) studies were performed for correlating the chemical composition of imidazole-5-carboxylic acid analogs and their angiotensin II [Formula: see text] receptor antagonist activity using partial least squares and k-nearest neighbor, respectively. For comparing the three different feature selection methods of 2D-QSAR, k-nearest neighbor models were used in conjunction with simulated annealing (SA), genetic algorithm and stepwise coupled with partial least square (PLS) showed variation in biological activity. The statistically significant best 2D-QSAR model having good predictive ability with statistical values of [Formula: see text] and [Formula: see text] was developed by SA-partial least square with the descriptors like [Formula: see text]count, 5Chain count, SdsCHE-index, and H-acceptor count, showing that increase in the values of these descriptors is beneficial to the activity. The 3D-QSAR studies were performed using the SA-PLS. A leave-one-out cross-validated correlation coefficient [Formula: see text] and predicate activity [Formula: see text] = 0.7226 were obtained. The information rendered by QSAR models may lead to a better understanding of structural requirements of substituted imidazole-5-carboxylic acid derivatives and also aid in designing novel potent antihypertensive molecules.

  18. Twistronics: Manipulating the electronic properties of two-dimensional layered structures through their twist angle

    NASA Astrophysics Data System (ADS)

    Carr, Stephen; Massatt, Daniel; Fang, Shiang; Cazeaux, Paul; Luskin, Mitchell; Kaxiras, Efthimios

    2017-02-01

    The ability in experiments to control the relative twist angle between successive layers in two-dimensional (2D) materials offers an approach to manipulating their electronic properties; we refer to this approach as "twistronics." A major challenge to theory is that, for arbitrary twist angles, the resulting structure involves incommensurate (aperiodic) 2D lattices. Here, we present a general method for the calculation of the electronic density of states of aperiodic 2D layered materials, using parameter-free Hamiltonians derived from ab initio density-functional theory. We use graphene, a semimetal, and MoS2, a representative of the transition-metal dichalcogenide family of 2D semiconductors, to illustrate the application of our method, which enables fast and efficient simulation of multilayered stacks in the presence of local disorder and external fields. We comment on the interesting features of their density of states as a function of twist angle and local configuration and on how these features can be experimentally observed.

  19. Monitoring guanidinium-induced structural changes in ribonuclease proteins using Raman spectroscopy and 2D correlation analysis.

    PubMed

    Brewster, Victoria L; Ashton, Lorna; Goodacre, Royston

    2013-04-02

    Assessing the stability of proteins by comparing their unfolding profiles is a very important characterization and quality control step for any biopharmaceutical, and this is usually measured by fluorescence spectroscopy. In this paper we propose Raman spectroscopy as a rapid, noninvasive alternative analytical method and we shall show this has enhanced sensitivity and can therefore reveal very subtle protein conformational changes that are not observed with fluorescence measurements. Raman spectroscopy is a powerful nondestructive method that has a strong history of applications in protein characterization. In this work we describe how Raman microscopy can be used as a fast and reliable method of tracking protein unfolding in the presence of a chemical denaturant. We have compared Raman spectroscopic data to the equivalent samples analyzed using fluorescence spectroscopy in order to validate the Raman approach. Calculations from both Raman and fluorescence unfolding curves of [D]50 values and Gibbs free energy correlate well with each other and more importantly agree with the values found in the literature for these proteins. In addition, 2D correlation analysis has been performed on both Raman and fluorescence data sets in order to allow further comparisons of the unfolding behavior indicated by each method. As many biopharmaceuticals are glycosylated in order to be functional, we compare the unfolding profiles of a protein (RNase A) and a glycoprotein (RNase B) as measured by Raman spectroscopy and discuss the implications that glycosylation has on the stability of the protein.

  20. Experimental Investigation of the Near Wall Flow Structure of a Low Reynolds Number 3-D Turbulent Boundary Layer

    NASA Technical Reports Server (NTRS)

    Fleming, J. L.; Simpson, R. L.

    1997-01-01

    Laser Doppler velocimetry (LDV) measurements and hydrogen bubble flow visualization techniques were used to examine the near-wall flow structure of 2D and 3D turbulent boundary layers (TBLs) over a range of low Reynolds numbers. The goals of this research were (1) an increased understanding of the flow physics in the near wall region of turbulent boundary layers,(2) to observe and quantify differences between 2D and 3D TBL flow structures, and (3) to document Reynolds number effects for 3D TBLs. The LDV data have provided results detailing the turbulence structure of the 2D and 3D TBLs. These results include mean Reynolds stress distributions, flow skewing results, and U and V spectra. Effects of Reynolds number for the 3D flow were also examined. Comparison to results with the same 3D flow geometry but at a significantly higher Reynolds number provided unique insight into the structure of 3D TBLs. While the 3D mean and fluctuating velocities were found to be highly dependent on Reynolds number, a previously defined shear stress parameter was discovered to be invariant with Reynolds number. The hydrogen bubble technique was used as a flow visualization tool to examine the near-wall flow structure of 2D and 3D TBLs. Both the quantitative and qualitative results displayed larger turbulent fluctuations with more highly concentrated vorticity regions for the 2D flow.

  1. Self-assembly of alternating left- and right-handed infinite Cd(II) helicates into a 2D open framework structure

    NASA Astrophysics Data System (ADS)

    Ghosh, Sujit K.; Bharadwaj, Parimal K.

    2006-08-01

    Pyrazine-2,3,5,6-tetracarboxylic acid (ptcH 4) reacts with Cd(NO 3) 2·6H 2O at room temperature in the presence of pyridine to form a 2D open framework built from alternating left- and right-handed helicates with the empirical formula, {[Cd 2(ptc)·(py) 5·H 2O]·5H 2O·py} n, 1. Lattice water and pyridine molecules form an intricate array of H-bonding with the 2D sheets leading to a 3D structure. This compound crystallizes in the monoclinic space group C2/ c with the following lattice parameters— a=24.103(2), b=13.480(5), c=29.176(4) Å, β=109.427(3)°, V=8940(4) Å 3, Z=8, R1=0.0513, wR2=0.1552, S=1.085.

  2. New dicyano cyclometalated compounds containing Pd(II)-Tl(I) bonds as building blocks in 2D extended structures: synthesis, structure, and luminescence studies.

    PubMed

    Sicilia, Violeta; Forniés, Juan; Fuertes, Sara; Martín, Antonio

    2012-10-15

    New mixed metal complexes [PdTl(C^N)(CN)(2)] [C^N = 7,8-benzoquinolinate (bzq, 3); 2-phenylpyridinate (ppy, 4)] have been synthesized by reaction of their corresponding precursors (NBu(4))[Pd(C^N)(CN)(2)] [C^N = bzq (1), ppy (2)] with TlPF(6). Compounds 3 and 4 were studied by X-ray diffraction, showing the not-so-common Pd(II)-Tl(I) bonds. Both crystal structures exhibit 2-D extended networks fashioned by organometallic "PdTl(C^N)(CN)(2)" units, each one containing a donor-acceptor Pd(II)-Tl(I) bond, which are connected through additional Tl···N≡C contacts and weak Tl···π (bzq) contacts in the case of 3. Solid state emissions are red-shifted compared with those of the precursors and have been assigned to metal-metal'-to-ligand charge transfer (MM'LCT [d/s σ*(Pd,Tl) → π*(C^N)]) mixed with some intraligand ((3)IL[π(C^N) → π*(C^N)]) character. In diluted solution either at room temperature or 77 K, the Pd-Tl bond is no longer retained as confirmed by mass spectrometry, NMR, and UV-vis spectroscopic techniques.

  3. Highly crystalline 2D superconductors

    NASA Astrophysics Data System (ADS)

    Saito, Yu; Nojima, Tsutomu; Iwasa, Yoshihiro

    2016-12-01

    Recent advances in materials fabrication have enabled the manufacturing of ordered 2D electron systems, such as heterogeneous interfaces, atomic layers grown by molecular beam epitaxy, exfoliated thin flakes and field-effect devices. These 2D electron systems are highly crystalline, and some of them, despite their single-layer thickness, exhibit a sheet resistance more than an order of magnitude lower than that of conventional amorphous or granular thin films. In this Review, we explore recent developments in the field of highly crystalline 2D superconductors and highlight the unprecedented physical properties of these systems. In particular, we explore the quantum metallic state (or possible metallic ground state), the quantum Griffiths phase observed in out-of-plane magnetic fields and the superconducting state maintained in anomalously large in-plane magnetic fields. These phenomena are examined in the context of weakened disorder and/or broken spatial inversion symmetry. We conclude with a discussion of how these unconventional properties make highly crystalline 2D systems promising platforms for the exploration of new quantum physics and high-temperature superconductors.

  4. Assessment of the effects of scrape-off layer fluctuations on first wall sputtering with the TOKAM-2D turbulence code

    NASA Astrophysics Data System (ADS)

    Marandet, Y.; Nace, N.; Valentinuzzi, M.; Tamain, P.; Bufferand, H.; Ciraolo, G.; Genesio, P.; Mellet, N.

    2016-11-01

    Plasma material interactions on the first wall of future tokamaks such as ITER and DEMO are likely to play an important role, because of turbulent radial transport. The latter results to a large extent from the radial propagation of plasma filaments through a tenuous background. In such a situation, mean field descriptions (on which transport codes rely) become questionable. First wall sputtering is of particular interest, especially in a full W machine, since it has been shown experimentally that first wall sources control core contamination. In ITER, beryllium sources will be one of the important actors in determining the fuel retention level through codeposition. In this work, we study the effect of turbulent fluctuations on mean sputtering yields and fluxes, relying on a new version of the TOKAM-2D code which includes ion temperature fluctuations. We show that fluctuations enhance sputtering at sub-threshold impact energies, by more than an order of magnitude when fluctuation levels are of order unity.

  5. Optoelectronics with 2D semiconductors

    NASA Astrophysics Data System (ADS)

    Mueller, Thomas

    2015-03-01

    Two-dimensional (2D) atomic crystals, such as graphene and layered transition-metal dichalcogenides, are currently receiving a lot of attention for applications in electronics and optoelectronics. In this talk, I will review our research activities on electrically driven light emission, photovoltaic energy conversion and photodetection in 2D semiconductors. In particular, WSe2 monolayer p-n junctions formed by electrostatic doping using a pair of split gate electrodes, type-II heterojunctions based on MoS2/WSe2 and MoS2/phosphorene van der Waals stacks, 2D multi-junction solar cells, and 3D/2D semiconductor interfaces will be presented. Upon optical illumination, conversion of light into electrical energy occurs in these devices. If an electrical current is driven, efficient electroluminescence is obtained. I will present measurements of the electrical characteristics, the optical properties, and the gate voltage dependence of the device response. In the second part of my talk, I will discuss photoconductivity studies of MoS2 field-effect transistors. We identify photovoltaic and photoconductive effects, which both show strong photoconductive gain. A model will be presented that reproduces our experimental findings, such as the dependence on optical power and gate voltage. We envision that the efficient photon conversion and light emission, combined with the advantages of 2D semiconductors, such as flexibility, high mechanical stability and low costs of production, could lead to new optoelectronic technologies.

  6. Bulk anisotropic excitons in type-II semiconductors built with 1D and 2D low-dimensional structures

    NASA Astrophysics Data System (ADS)

    Coyotecatl, H. A.; Del Castillo-Mussot, M.; Reyes, J. A.; Vazquez, G. J.; Montemayor-Aldrete, J. A.; Reyes-Esqueda, J. A.; Cocoletzi, G. H.

    2005-08-01

    We used a simple variational approach to account for the difference in the electron and hole effective masses in Wannier-Mott excitons in type-II semiconducting heterostructures in which the electron is constrained in an one-dimensional quantum wire (1DQW) and the hole is in a two-dimensional quantum layer (2DQL) perpendicular to the wire or viceversa. The resulting Schrodinger equation is similar to that of a 3D bulk exciton because the number of free (nonconfined) variables is three; two coming from the 2DQL and one from the 1DQW. In this system the effective electron-hole interaction depends on the confinement potentials.

  7. Geometric Bioinspired Networks for Recognition of 2-D and 3-D Low-Level Structures and Transformations.

    PubMed

    Bayro-Corrochano, Eduardo; Vazquez-Santacruz, Eduardo; Moya-Sanchez, Eduardo; Castillo-Munis, Efrain

    2016-10-01

    This paper presents the design of radial basis function geometric bioinspired networks and their applications. Until now, the design of neural networks has been inspired by the biological models of neural networks but mostly using vector calculus and linear algebra. However, these designs have never shown the role of geometric computing. The question is how biological neural networks handle complex geometric representations involving Lie group operations like rotations. Even though the actual artificial neural networks are biologically inspired, they are just models which cannot reproduce a plausible biological process. Until now researchers have not shown how, using these models, one can incorporate them into the processing of geometric computing. Here, for the first time in the artificial neural networks domain, we address this issue by designing a kind of geometric RBF using the geometric algebra framework. As a result, using our artificial networks, we show how geometric computing can be carried out by the artificial neural networks. Such geometric neural networks have a great potential in robot vision. This is the most important aspect of this contribution to propose artificial geometric neural networks for challenging tasks in perception and action. In our experimental analysis, we show the applicability of our geometric designs, and present interesting experiments using 2-D data of real images and 3-D screw axis data. In general, our models should be used to process different types of inputs, such as visual cues, touch (texture, elasticity, temperature), taste, and sound. One important task of a perception-action system is to fuse a variety of cues coming from the environment and relate them via a sensor-motor manifold with motor modules to carry out diverse reasoned actions.

  8. Bottom-Up Fabrication of Single-Layered Nitrogen-Doped Graphene Quantum Dots through Intermolecular Carbonization Arrayed in a 2D Plane.

    PubMed

    Li, Rui; Liu, Yousong; Li, Zhaoqian; Shen, Jinpeng; Yang, Yuntao; Cui, Xudong; Yang, Guangcheng

    2016-01-04

    A single-layered intermolecular carbonization method was applied to synthesize single-layered nitrogen-doped graphene quantum dots (N-GQDs) by using 1,3,5-triamino-2,4,6-trinitrobenzene (TATB) as the only precursor. In this method, the gas produced in the pyrolysis of TATB assists with speeding up of the reactions and expanding the layered distance, so that it facilitates the formation of single-layered N-GQDs (about 80 %). The symmetric intermolecular carbonizations of TATB arrayed in a plane and six nitrogen-containing groups ensure small, uniform sizes (2-5 nm) of the resulting products, and provide high nitrogen-doping concentrations (N/C atomic ratio ca. 10.6 %). In addition to release of the produced gas, TATB is almost completely converted into aggregated N-GQDs; thus, relatively higher production rates are possible with this approach. Investigations show that the as-produced N-GQDs have superior fluorescent characteristics; high water solubility, biocompatibility, and low toxicity; and are ready for potential applications, such as biomedical imaging and optoelectronic devices.

  9. Layers: A molecular surface peeling algorithm and its applications to analyze protein structures

    PubMed Central

    Karampudi, Naga Bhushana Rao; Bahadur, Ranjit Prasad

    2015-01-01

    We present an algorithm ‘Layers’ to peel the atoms of proteins as layers. Using Layers we show an efficient way to transform protein structures into 2D pattern, named residue transition pattern (RTP), which is independent of molecular orientations. RTP explains the folding patterns of proteins and hence identification of similarity between proteins is simple and reliable using RTP than with the standard sequence or structure based methods. Moreover, Layers generates a fine-tunable coarse model for the molecular surface by using non-random sampling. The coarse model can be used for shape comparison, protein recognition and ligand design. Additionally, Layers can be used to develop biased initial configuration of molecules for protein folding simulations. We have developed a random forest classifier to predict the RTP of a given polypeptide sequence. Layers is a standalone application; however, it can be merged with other applications to reduce the computational load when working with large datasets of protein structures. Layers is available freely at http://www.csb.iitkgp.ernet.in/applications/mol_layers/main. PMID:26553411

  10. Strained-layer superlattice focal plane array having a planar structure

    DOEpatents

    Kim, Jin K.; Carroll, Malcolm S.; Gin, Aaron; Marsh, Phillip F.; Young, Erik W.; Cich, Michael J.

    2010-07-13

    An infrared focal plane array (FPA) is disclosed which utilizes a strained-layer superlattice (SLS) formed of alternating layers of InAs and In.sub.xGa.sub.1-xSb with 0.ltoreq.x.ltoreq.0.5 epitaxially grown on a GaSb substrate. The FPA avoids the use of a mesa structure to isolate each photodetector element and instead uses impurity-doped regions formed in or about each photodetector for electrical isolation. This results in a substantially-planar structure in which the SLS is unbroken across the entire width of a 2-D array of the photodetector elements which are capped with an epitaxially-grown passivation layer to reduce or eliminate surface recombination. The FPA has applications for use in the wavelength range of 3-25 .mu.m.

  11. Structure and Dynamics of Asymmetric Poly(styrene-b-1,4-isoprene) Diblock Copolymer under 1D and 2D Nanoconfinement.

    PubMed

    Kipnusu, Wycliffe K; Elmahdy, Mahdy M; Mapesa, Emmanuel U; Zhang, Jianqi; Böhlmann, Winfried; Smilgies, Detlef-M; Papadakis, Christine M; Kremer, Friedrich

    2015-06-17

    The impact of 1- and 2-dimensional (2D) confinement on the structure and dynamics of poly(styrene-b-1,4-isoprene) P(S-b-I) diblock copolymer is investigated by a combination of Scanning Electron Microscopy (SEM), Atomic Force Microscopy (AFM), Grazing-Incidence Small-Angle X-ray Scattering (GISAXS), and Broadband Dielectric Spectroscopy (BDS). 1D confinement is achieved by spin coating the P(S-b-I) to form nanometric thin films on silicon substrates, while in the 2D confinement, the copolymer is infiltrated into cylindrical anodized aluminum oxide (AAO) nanopores. After dissolving the AAO matrix having mean pore diameter of 150 nm, the SEM images of the exposed P(S-b-I) show straight nanorods. For the thin films, GISAXS and AFM reveal hexagonally packed cylinders of PS in a PI matrix. Three dielectrically active relaxation modes assigned to the two segmental modes of the styrene and isoprene blocks and the normal mode of the latter are studied selectively by BDS. The dynamic glass transition, related to the segmental modes of the styrene and isoprene blocks, is independent of the dimensionality and the finite sizes (down to 18 nm) of confinement, but the normal mode is influenced by both factors with 2D geometrical constraints exerting greater impact. This reflects the considerable difference in the length scales on which the two kinds of fluctuations take place.

  12. Structure-Activity Relationships and Pharmacophore Model of a Non-Competitive Pyrazoline Containing Class of GluN2C/GluN2D Selective Antagonists

    PubMed Central

    Acker, Timothy M.; Khatri, Alpa; Vance, Katie M.; Slabber, Cathryn; Bacsa, John; Snyder, James P.; Traynelis, Stephen F.; Liotta, Dennis C.

    2013-01-01

    Here we describe the synthesis and structure-activity relationship for a class of pyrazoline-containing dihydroquinolone negative allosteric modulators of the NMDA receptor that show strong subunit-selectivity for GluN2C- and GluN2D-containing receptors over GluN2A-and GluN2B-containing receptors. Several members of this class inhibit NMDA receptor responses in the nanomolar range, and are more than 50-fold selective over GluN1/GluN2A and GluN1/GluN2B NMDA receptors, as well as AMPA, kainate, GABA, glycine, nicotinic, serotonin, and purinergic receptors. Analysis of the purified enantiomers of one of the more potent and selective compounds shows that the S-enantiomer is both more potent and more selective than the R-enantiomer. The S-enantiomer had an IC50 value of 0.17–0.22 µM at GluN2D- and GluN2C-containing receptors, respectively, and showed over 70-fold selectivity over other NMDA receptor subunits. The subunit-selectivity of this class of compounds should be useful in defining the role of GluN2C- and GluN2D-containing receptors in specific brain circuits in both physiological and patho-physiological conditions. PMID:23909910

  13. Orbital-dependent Electron-Hole Interaction in Graphene and Associated Multi-Layer Structures

    PubMed Central

    Deng, Tianqi; Su, Haibin

    2015-01-01

    We develop an orbital-dependent potential to describe electron-hole interaction in materials with structural 2D character, i.e. quasi-2D materials. The modulated orbital-dependent potentials are also constructed with non-local screening, multi-layer screening, and finite gap due to the coupling with substrates. We apply the excitonic Hamiltonian in coordinate-space with developed effective electron-hole interacting potentials to compute excitons’ binding strength at M (π band) and Γ (σ band) points in graphene and its associated multi-layer forms. The orbital-dependent potential provides a range-separated property for regulating both long- and short-range interactions. This accounts for the existence of the resonant π exciton in single- and bi-layer graphenes. The remarkable strong electron-hole interaction in σ orbitals plays a decisive role in the existence of σ exciton in graphene stack at room temperature. The interplay between gap-opening and screening from substrates shed a light on the weak dependence of σ exciton binding energy on the thickness of graphene stacks. Moreover, the analysis of non-hydrogenic exciton spectrum in quasi-2D systems clearly demonstrates the remarkable comparable contribution of orbital dependent potential with respect to non-local screening process. The understanding of orbital-dependent potential developed in this work is potentially applicable for a wide range of materials with low dimension. PMID:26610715

  14. Modeling and Analysis of Granite Matrix Pore Structure and Hydraulic Characteristics in 2D and 3D Networks

    NASA Astrophysics Data System (ADS)

    Gvozdik, L.; Polak, M.; Zaruba, J.; Vanecek, M.

    2010-12-01

    A geological environment labeled as a Granite massif represents in terms of groundwater flow and transport a distinct hydrogeological environment from that of sedimentary basins, the characterisation of which is generally more complex and uncertain. Massifs are composed of hard crystalline rocks with the very low effective porosity. Due to their rheological properties such rocks are predisposed to brittle deformation resulting from changes in stress conditions. Our specific research project (Research on the influence of intergrangular porosity on deep geological disposal: geological formations, methodology and the development of measurement apparatus) is focussed on the problem of permeable zones within apparently undisturbed granitic rock matrix. The project including the both laboratory and in-situ tracer tests study migration along and through mineral grains in fresh and altered granite. The objective of the project is to assess whether intergranular porosity is a general characteristic of the granitic rock matrix or subject to significant evolution resulting from geochemical and/or hydrogeochemical processes, geotechnical and/or mechanical processes. Moreover, the research is focussed on evaluating methods quantifying intergranular porosity by both physical testing and mathematical modelling using verified standard hydrological software tools. Groundwater flow in microfractures and intergranular pores in granite rock matrix were simulated in three standard hydrogeological modeling programs with completely different conceptual approaches: MODFLOW (Equivalent Continuum concept), FEFLOW (Discrete Fracture and Equivalent Continuum concepts) and NAPSAC (Discrete Fracture Network concept). Specialized random fracture generators were used for creation of several 2D and 3D models in each of the chosen program. Percolation characteristics of these models were tested and analyzed. Several scenarios of laboratory tests of the rock samples permeability made in triaxial

  15. Molecular phylogenetics in 2D: ITS2 rRNA evolution and sequence-structure barcode from Veneridae to Bivalvia.

    PubMed

    Salvi, Daniele; Mariottini, Paolo

    2012-11-01

    In this study, we analyzed the nuclear ITS2 rRNA primary sequence and secondary structure in Veneridae and comparatively with 20 Bivalvia taxa to test the phylogenetic resolution of this marker and its suitability for molecular diagnosis at different taxonomic levels. Maximum likelihood and Bayesian trees based on primary sequences were congruent with (profile-) neighbor-joining trees based on a combined model of sequence-structure evolution. ITS2 showed higher resolution below the subfamily level, providing a phylogenetic signal comparable to (mitochondrial/nuclear) gene fragments 2-5 times longer. Structural elements of the ITS2 folding, such as specific mismatch pairing and compensatory base changes, provided further support for the monophyly of some groups and for their phylogenetic relationships. Veneridae ITS2 folding is structured in six domains (DI-VI) and shows five striking sequence-structure features. Two of them, the Basal and Apical STEMs, are common to Bivalvia, while the presence of both the Branched STEM and the Y/R stretches occurs in five superfamilies of the two Heterodonta orders Myoida and Veneroida, thus questioning their reciprocal monophyly. Our results validated the ITS2 as a suitable marker for venerids phylogenetics and taxonomy, and underlined the significance of including secondary structure information for both applications at several systematic levels within bivalves.

  16. Band structure of a 2D photonic crystal based on ferrofluids of Co(1-x)Znx Fe2O4 nanoparticles under perpendicular applied magnetic field

    NASA Astrophysics Data System (ADS)

    Lopez, Javier; Gonzalez, Luz Esther; Quinonez, Mario; Porras, Nelson; Zambrano, Gustavo; Gomez, Maria Elena

    2014-03-01

    Using a ferrfluid of cobalt-zinc ferrite nanoparticles Co(1 - x)ZnxFe2O4 coated with oleic acid and suspended in ethanol, we have fabricated a 2D photonic crystal (PC) by the application of an external magnetic field perpendicular to the plane of the ferrofluid. The 2D PC is made by rods of nanoparticles organized in a hexagonal structure. By means of the plane-wave expansion method, we study its photonic band structure (PBS) which depends on the effective permittivity and on the area ratio of the liquid phase. Additionaly, taking into account the Maxwell-Garnett theory we calculated the effective permittivity of the rods. We have found that the effective refractive index of the ferrofluid increases with its magnetization. Using these results we calculate the band structure of the photonic crystal at different applied magnetic fields, finding that the increase of the applied magnetic field shifts the band structure to lower frequencies with the appearance of more band gaps. Departamento de Física, Universidad del Valle, A.A. 25360, Cali, Colombia

  17. Detrimental influence of catalyst seeding on the device properties of CVD-grown 2D layered materials: A case study on MoSe{sub 2}

    SciTech Connect

    Utama, M. Iqbal Bakti; Lu, Xin; Yuan, Yanwen; Xiong, Qihua

    2014-12-22

    Seed catalyst such as perylene-3,4,9,10-tetracarboxylic acid tetrapotassium (PTAS) salt has been used for promoting the growth of atomically thin layered materials in chemical vapor deposition (CVD) synthesis. However, the ramifications from the usage of such catalyst are not known comprehensively. Here, we report the influence of PTAS seeding on the transistor device performance from few-layered CVD-grown molybdenum diselenide (MoSe{sub 2}) flakes. While better repeatability and higher yield can be obtained with the use of PTAS seeds in synthesis, we observed that PTAS-seeded flakes contain particle impurities. Moreover, devices from PTAS-seeded MoSe{sub 2} flakes consistently displayed poorer field-effect mobility, current on-off ratio, and subthreshold swing as compared to unseeded flakes.

  18. Toward DNA electrochemical sensing by free-standing ZnO nanosheets grown on 2D thin-layered MoS2.

    PubMed

    Yang, Tao; Chen, Meijing; Kong, Qianqian; Luo, Xiliang; Jiao, Kui

    2017-03-15

    Very recently, the 2-dimensional MoS2 layer as base substrate integrated with other materials has caused people's emerging attention. In this paper, a thin-layered MoS2 was prepared through an ultrasonic exfoliation method from bulk MoS2 and then the free-standing ZnO nanosheet was electrodeposited on the MoS2 scaffold for DNA sensing. The ZnO/MoS2 nanocomposite revealed smooth and vertical nanosheets morphology by scanning electron microscopy, compared with the sole MoS2 and sole ZnO. Importantly, the partially negative charged MoS2 layer is beneficial to the nucleation and growth of ZnO nanosheets under the effect of electrostatic interactions. Classic methylene blue, which possesses different affinities to dsDNA and ssDNA, was adopted as the measure signal to confirm the immobilization and hybridization of DNA on ZnO nanosheets and pursue the optimal synthetic conditions. And the results demonstrated that the free-standing ZnO/MoS2 nanosheets had low detection limit (6.6×10(-16)M) and has a positive influence on DNA immobilization and hybridization.

  19. Individual bottle brush molecules in dense 2D layers restoring high degree of extension after collapse-decollapse cycle: directly measured scaling exponent.

    PubMed

    Gallyamov, M O; Tartsch, B; Potemkin, I I; Börner, H G; Matyjaszewski, K; Khokhlov, A R; Möller, M

    2009-05-01

    We prepared dense films of adsorbed brush-like macromolecules on mica substrate by transfer of compressed Langmuir monolayers from water subphase. The main macromolecular contours in the dense films were clearly resolved by SFM. The films were subjected to successive treatments by ethanol and water vapours. In accordance with previous results for isolated macromolecules, the films underwent collapse and subsequent decollapse morphological transformations in the changing vapour environment. Statistical analysis of the macromolecular dimensions in the films allowed us to measure the values of the scaling exponent nu determining the correlation between mean lateral and linear dimensions of the macromolecules. The analysis showed that the macromolecular conformations in the film as transferred were similar to the previously described conformations of the same macromolecules deposited directly on mica as isolated chains at much lower surface densities. The determined nu was close to the 0.75 value corresponding to the 2D SAW statistics. We assumed that the molecules retained the high degree of extension during the compression step due to suppressed reorganisation of the side chains. Differently from previous observations for isolated macromolecules, the restored conformations in the dense films after collapse-decollapse cycle were more extended with the nu of about 0.73 value. A theoretical explanation of the high degree of re-extension is proposed.

  20. Hydrophobic cluster analysis: procedures to derive structural and functional information from 2-D-representation of protein sequences.

    PubMed

    Lemesle-Varloot, L; Henrissat, B; Gaboriaud, C; Bissery, V; Morgat, A; Mornon, J P

    1990-08-01

    Hydrophobic cluster analysis (HCA) [15] is a very efficient method to analyse and compare protein sequences. Despite its effectiveness, this method is not widely used because it relies in part on the experience and training of the user. In this article, detailed guidelines as to the use of HCA are presented and include discussions on: the definition of the hydrophobic clusters and their relationships with secondary and tertiary structures; the length of the clusters; the amino acid classification used for HCA; the HCA plot programs; and the working strategies. Various procedures for the analysis of a single sequence are presented: structural segmentation, structural domains and secondary structure evaluation. Like most sequence analysis methods, HCA is more efficient when several homologous sequences are compared. Procedures for the detection and alignment of distantly related proteins by HCA are described through several published examples along with 2 previously unreported cases: the beta-glucosidase from Ruminococcus albus is clearly related to the beta-glucosidases from Clostridum thermocellum and Hansenula anomala although they display a reverse organization of their constitutive domains; the alignment of the sequence of human GTPase activating protein with that of the Crk oncogene is presented. Finally, the pertinence of HCA in the identification of important residues for structure/function as well as in the preparation of homology modelling is discussed.

  1. Investigation of mechanical strength of 2D nanoscale structures using a molecular dynamics based computational intelligence approach

    NASA Astrophysics Data System (ADS)

    Garg, A.; Vijayaraghavan, V.; Wong, C. H.; Tai, K.; Singru, Pravin M.; Mahapatra, S. S.; Sangwan, K. S.

    2015-09-01

    A molecular dynamics (MD) based computational intelligence (CI) approach is proposed to investigate the Young modulus of two graphene sheets: Armchair and Zigzag. In this approach, the effect of aspect ratio, the temperature, the number of atomic planes and the vacancy defects on the Young modulus of two graphene sheets are first analyzed using the MD simulation. The data obtained using the MD simulation is then fed into the paradigm of a CI cluster comprising of genetic programming, which was specifically designed to formulate the explicit relationship of Young modulus of two graphene structures. We find that the MD-based-CI model is able to model the Young modulus of two graphene structures very well, which compiles in good agreement with that of experimental results obtained from the literature. Additionally, we also conducted sensitivity and parametric analysis and found that the number of defects has the most dominating influence on the Young modulus of two graphene structures.

  2. LOW-Tg Bismuth Phosphate Glasses for Glass-Imprinting and Fabrication of 2d Sub-Wavelength Structure

    NASA Astrophysics Data System (ADS)

    Kitamura, Naoyuki; Fukumi, Kohei; Nakamura, Junichi; Hidaka, Tatsuo; Ikeda, Takurou; Hashima, Hidekazu; Nishii, Junji

    We have developed zinc-bismuth-phosphate glasses, which have deformation temperatures under 450°C and refractive indices higher than 1.7, in order to produce an antireflection structure on the surface by a glass-imprinting process. Two-dimensionally arrayed conical cavities of sub-wavelength size were fabricated on a SiC mold by electron lithography and dry etching techniques. The sub-wavelength periodic structure was transferred onto the glass surface by a glass-imprinting process using the mold. The sub-wavelength structure suppressed the reflectance by approximately 90%. A weak maximum was observed in the reflection spectra around 400-500 nm, which decreased in intensity and shifted toward shorter wavelengths with decreasing pitch.

  3. Controls on the Flow Regime and Thermal Structure of the Subduction Zone Mantle Wedge: A Systematic 2-D and 3-D Investigation

    NASA Astrophysics Data System (ADS)

    Le Voci, Giuseppe; Davies, Rhodri; Goes, Saskia; Kramer, Stephan; Wilson, Cian

    2014-05-01

    Arc volcanism at subduction zones is likely regulated by the mantle wedge's flow regime and thermal structure and, hence, numerous studies have attempted to quantify the principal controls on mantle wedge conditions. Here, we build on these previous studies by undertaking the first systematic 2-D and 3-D numerical investigation, across a wide parameter-space, into how hydration and thermal buoyancy influence the wedge's flow regime and associated thermal structure, above a kinematically driven subducting plate. We find that small-scale convection (SSC), resulting from Rayleigh-Taylor instabilities, or drips, off the base of the overriding lithosphere, is a typical occurrence, if: (i) viscosities are < 5×1018 Pa s; and (ii) hydrous weakening of wedge rheology extends at least 100-150 km from the trench. In 2-D models, instabilities generally take the form of 'drips'. Although along-strike averages of wedge velocities and temperature in 3-D structure are consistent with those in 2-D, fluctuations are larger in 3-D. Furthermore, in 3-D, two separate, but interacting, longitudinal Richter roll systems form (with their axes aligned perpendicular to the trench), the first below the arc region and the second below the back-arc region. These instabilities result in transient and spatial temperature fluctuations of 100-150K, which are sufficient to influence melting, the stability of hydrous minerals and the dehydration of crustal material. Furthermore, they are efficient at eroding the overriding lithosphere, particularly in 3-D and, thus, provide a means to explain observations of high heat flow and thin back-arc lithosphere at many subduction zones, if back-arc mantle is hydrated.

  4. Deep crustal structure of magma-rich passive margin as revealed by the Northeast GreenlandSPAN 2D seismic survey and airborne Full Tensor Gradiometry

    NASA Astrophysics Data System (ADS)

    Mazur, Stanislaw; Rippington, Stephen; Silva, Mercia; Houghton, Phill; Helwig, Jim

    2014-05-01

    The objective of our project was to integrate the results from the Northeast GreenlandSPAN™ 2D seismic survey with newly acquired airborne Full Tensor Gradiometry (FTG) and Magnetic potential field data over the Danmarkshaven Ridge area, NE Greenland. The potential field data were constrained by 32 long offset pre stack depth migrated seismic profiles selected from the Northeast GreenlandSPAN™ survey. The results provide a new insight in the deep crustal architecture of the Greenland passive margin. They also shed a new light on crustal-scale deformation and igneous activity in a magma-rich continental margin. The structural data set is based on the integrated interpretation of 2D seismic data and FTG data, which was further supplemented by the airborne magnetic data plus the gravity and magnetic shipborne data. 2D gravity and magnetic forward modelling was used for testing geological/seismic models against the potential field data. A regional Moho grid derived from 3D gravity inversion was as a starting point and reference for the 2D modelling. The resultant horizons from the 2D potential fields models were subsequently gridded to help create a 3D structural model. The computed residual signal from the 3D model, the difference between the observed gravity and the forward calculated model response, allowed the accuracy of the structural interpretation to be tested. The area is dominated by three structural trends: (1) N-S to NNE-SSW, (2) WNW-ESE, and (3) NW-SE. The first trend is represented by Early Cretaceous normal faults defining the Danmarkshaven Ridge whereas the second set of structures corresponds to the WNW-ESE oriented right-lateral strike slip faults. The third structural trend is delineated by the NW-SE oriented Greenland Fracture Zone (GFZ). Importantly, a distinct step in the COB suggests post-break-up reactivation of the GFZ with left-lateral kinematics. There is a good match between the modelled Moho and the GFZ suggesting its continuation

  5. Sparsity-based Ankylography for Recovering 3D molecular structures from single-shot 2D scattered light intensity

    PubMed Central

    Mutzafi, Maor; Shechtman, Yoav; Eldar, Yonina C.; Cohen, Oren; Segev, Mordechai

    2015-01-01

    Deciphering the three-dimensional (3D) structure of complex molecules is of major importance, typically accomplished with X-ray crystallography. Unfortunately, many important molecules cannot be crystallized, hence their 3D structure is unknown. Ankylography presents an alternative, relying on scattering an ultrashort X-ray pulse off a single molecule before it disintegrates, measuring the far-field intensity on a two-dimensional surface, followed by computation. However, significant information is absent due to lower dimensionality of the measurements and the inability to measure the phase. Recent Ankylography experiments attracted much interest, but it was counter-argued that Ankylography is valid only for objects containing a small number of volume pixels. Here, we propose a sparsity-based approach to reconstruct the 3D structure of molecules. Sparsity is natural for Ankylography, because molecules can be represented compactly in stoichiometric basis. Utilizing sparsity, we surpass current limits on recoverable information by orders of magnitude, paving the way for deciphering the 3D structure of macromolecules. PMID:26289358

  6. Multiple unpinned Dirac points in group-Va single-layers with phosphorene structure

    NASA Astrophysics Data System (ADS)

    Lu, Yunhao; Zhou, Di; Chang, Guoqing; Guan, Shan; Chen, Weiguang; Jiang, Yinzhu; Jiang, Jianzhong; Wang, Xue-Sen; Yang, Shengyuan A.; Feng, Yuan Ping; Kawazoe, Yoshiyuki; Lin, Hsin

    2016-06-01

    Emergent Dirac fermion states underlie many intriguing properties of graphene, and the search for them constitutes one strong motivation to explore two-dimensional (2D) allotropes of other elements. Phosphorene, the ultrathin layers of black phosphorous, has been a subject of intense investigations recently, and it was found that other group-Va elements could also form 2D layers with similar puckered lattice structure. Here, by a close examination of their electronic band structure evolution, we discover two types of Dirac fermion states emerging in the low-energy spectrum. One pair of (type-I) Dirac points is sitting on high-symmetry lines, while two pairs of (type-II) Dirac points are located at generic k-points, with different anisotropic dispersions determined by the reduced symmetries at their locations. Such fully-unpinned (type-II) 2D Dirac points are discovered for the first time. In the absence of spin-orbit coupling (SOC), we find that each Dirac node is protected by the sublattice symmetry from gap opening, which is in turn ensured by any one of three point group symmetries. The SOC generally gaps the Dirac nodes, and for the type-I case, this drives the system into a quantum spin Hall insulator phase. We suggest possible ways to realise the unpinned Dirac points in strained phosphorene.

  7. Creating new layered structures at high pressures: SiS2

    PubMed Central

    Plašienka, Dušan; Martoňák, Roman; Tosatti, Erio

    2016-01-01

    Old and novel layered structures are attracting increasing attention for their physical, electronic, and frictional properties. SiS2, isoelectronic to SiO2, CO2 and CS2, is a material whose phases known experimentally up to 6 GPa exhibit 1D chain-like, 2D layered and 3D tetrahedral structures. We present highly predictive ab initio calculations combined with evolutionary structure search and molecular dynamics simulations of the structural and electronic evolution of SiS2 up to 100 GPa. A highly stable CdI2-type layered structure, which is octahedrally coordinated with space group surprisingly appears between 4 and up to at least 100 GPa. The tetrahedral-octahedral switch is naturally expected upon compression, unlike the layered character realized here by edge-sharing SiS6 octahedral units connecting within but not among sheets. The predicted phase is semiconducting with an indirect band gap of about 2 eV at 10 GPa, decreasing under pressure until metallization around 40 GPa. The robustness of the layered phase suggests possible recovery at ambient pressure, where calculated phonon spectra indicate dynamical stability. Even a single monolayer is found to be dynamically stable in isolation, suggesting that it could possibly be sheared or exfoliated from bulk -SiS2. PMID:27886243

  8. Creating new layered structures at high pressures: SiS2

    NASA Astrophysics Data System (ADS)

    Plašienka, Dušan; Martoňák, Roman; Tosatti, Erio

    2016-11-01

    Old and novel layered structures are attracting increasing attention for their physical, electronic, and frictional properties. SiS2, isoelectronic to SiO2, CO2 and CS2, is a material whose phases known experimentally up to 6 GPa exhibit 1D chain-like, 2D layered and 3D tetrahedral structures. We present highly predictive ab initio calculations combined with evolutionary structure search and molecular dynamics simulations of the structural and electronic evolution of SiS2 up to 100 GPa. A highly stable CdI2-type layered structure, which is octahedrally coordinated with space group surprisingly appears between 4 and up to at least 100 GPa. The tetrahedral-octahedral switch is naturally expected upon compression, unlike the layered character realized here by edge-sharing SiS6 octahedral units connecting within but not among sheets. The predicted phase is semiconducting with an indirect band gap of about 2 eV at 10 GPa, decreasing under pressure until metallization around 40 GPa. The robustness of the layered phase suggests possible recovery at ambient pressure, where calculated phonon spectra indicate dynamical stability. Even a single monolayer is found to be dynamically stable in isolation, suggesting that it could possibly be sheared or exfoliated from bulk -SiS2.

  9. Elucidating structural characteristics of biomass using solution-state 2 D NMR with a mixture of deuterated dimethylsulfoxide and hexamethylphosphoramide

    DOE PAGES

    Pu, Yunqiao; Ragauskas, Arthur J.; Yoo, Chang Geun; ...

    2016-04-26

    In recent developments of NMR methods for characterization of lignocellulosic biomass allow improved understanding of plant cell-wall structures with minimal deconstruction and modification of biomass. This study introduces a new NMR solvent system composed of dimethylsulfoxide (DMSO-d6) and hexamethylphosphoramide (HMPA-d18). HMPA as a co-solvent enhanced swelling and mobility of the biomass samples; thereby it allowed enhancing signals of NMR spectra. Moreover, the structural information of biomass was successfully analyzed by the proposed NMR solvent system (DMSO-d6/HMPA-d18; 4:1, v/v) with different biomass. The proposed bi-solvent system does not require derivatization or isolation of biomass, facilitating a facile sample preparation and involvingmore » with no signals overlapping with biomass peaks. Furthermore, it also allows analyzing biomass with a room-temperature NMR probe instead of cryo-probes, which are traditionally used for enhancing signal intensities.« less

  10. Identifying residual structure in intrinsically disordered systems: a 2D IR spectroscopic study of the GVGXPGVG peptide.

    PubMed

    Lessing, Joshua; Roy, Santanu; Reppert, Mike; Baer, Marcel; Marx, Dominik; Jansen, Thomas La Cour; Knoester, Jasper; Tokmakoff, Andrei

    2012-03-21

    The peptide amide-I vibration of a proline turn encodes information on the turn structure. In this study, FTIR, two-dimensional IR spectroscopy and molecular dynamics simulations were employed to characterize the varying turn conformations that exist in the GVGX(L)PGVG family of disordered peptides. This analysis revealed that changing the size of the side chain at the X amino acid site from Gly to Ala to Val substantially alters the conformation of the peptide. To quantify this effect, proline peak shifts and intensity changes were compared to a structure-based spectroscopic model. These simulated spectra were used to assign the population of type-II β turns, bulged turns, and irregular β turns for each peptide. Of particular interest was the Val variant commonly found in the protein elastin, which contained a 25% population of irregular β turns containing two peptide hydrogen bonds to the proline C═O.

  11. 2D 31P solid state NMR spectroscopy, electronic structure and thermochemistry of PbP7

    NASA Astrophysics Data System (ADS)

    Benndorf, Christopher; Hohmann, Andrea; Schmidt, Peer; Eckert, Hellmut; Johrendt, Dirk; Schäfer, Konrad; Pöttgen, Rainer

    2016-03-01

    Phase pure polycrystalline PbP7 was prepared from the elements via a lead flux. Crystalline pieces with edge-lengths up to 1 mm were obtained. The assignment of the previously published 31P solid state NMR spectrum to the seven distinct crystallographic sites was accomplished by radio-frequency driven dipolar recoupling (RFDR) experiments. As commonly found in other solid polyphosphides there is no obvious correlation between the 31P chemical shift and structural parameters. PbP7 decomposes incongruently under release of phosphorus forming liquid lead as remainder. The thermal decomposition starts at T>550 K with a vapor pressure almost similar to that of red phosphorus. Electronic structure calculations reveal PbP7 as a semiconductor according to the Zintl description and clearly shows the stereo-active Pb-6s2 lone pairs in the electron localization function ELF.

  12. From 1D and 2D ZnO nanostructures to 3D hierarchical structures with enhanced gas sensing properties.

    PubMed

    Alenezi, Mohammad R; Henley, Simon J; Emerson, Neil G; Silva, S Ravi P

    2014-01-07

    Facile and low cost hydrothermal routes are developed to fabricate three-dimensional (3D) hierarchical ZnO structures with high surface-to-volume ratios and an increased fraction of (0001) polar surfaces. Hierarchical ZnO nanowires (ZNWs) and nanodisks (ZNDs) assembled from initial ZnO nanostructures are prepared from sequential nucleation and growth following a hydrothermal process. These hierarchical ZnO structures display an enhancement of gas sensing performance and exhibit significantly improved sensitivity and fast response to acetone in comparison to other mono-morphological ZnO, such as nanoparticles, NWs, or NDs. In addition to the high surface-to-volume ratio due to its small size, the nanowire building blocks show the enhanced gas sensing properties mainly ascribed to the increased proportion of exposed active (0001) planes, and the formation of many nanojunctions at the interface between the initial ZnO nanostructure and secondary NWs. This work provides the route for structure induced enhancement of gas sensing performance by designing a desirable nanostructure, which could also be extended to synthesize other metal oxide nanostructures with superior gas sensing performance.

  13. Application of the order-of-magnitude analysis to a fourth-order RANS closure for simulating a 2D boundary layer

    NASA Astrophysics Data System (ADS)

    Poroseva, Svetlana V.

    2013-11-01

    Simulations of turbulent boundary-layer flows are usually conducted using a set of the simplified Reynolds-Averaged Navier-Stokes (RANS) equations obtained by order-of-magnitude analysis (OMA) of the original RANS equations. The resultant equations for the mean-velocity components are closed using the Boussinesq approximation for the Reynolds stresses. In this study OMA is applied to the fourth-order RANS (FORANS) set of equations. The FORANS equations are chosen as they can be closed on the level of the 5th-order correlations without using unknown model coefficients, i.e. no turbulent diffusion modeling is required. New models for the 2nd-, 3rd- and 4th-order velocity-pressure gradient correlations are derived for the current FORANS equations. This set of FORANS equations and models are analyzed for the case of two-dimensional mean flow. The equations include familiar transport terms for the mean-velocity components along with algebraic expressions for velocity correlations of different orders specific to the FORANS approach. Flat plate DNS data (Spalart, 1988) are used to verify these expressions and the areas of the OMA applicability within the boundary layer. The material is based upon work supported by NASA under award NNX12AJ61A.

  14. Composite S-layer lipid structures

    PubMed Central

    Schuster, Bernhard; Sleytr, Uwe B.

    2010-01-01

    Designing and utilization of biomimetic membrane systems generated by bottom-up processes is a rapidly growing scientific and engineering field. Elucidation of the supramolecular construction principle of archaeal cell envelopes composed of S-layer stabilized lipid membranes led to new strategies for generating highly stable functional lipid membranes at meso- and macroscopic scale. In this review, we provide a state of the art survey how S-layer proteins, lipids, and polysaccharides may be used as basic building blocks for the assembly of S-layer supported lipid membranes. These biomimetic membrane systems are distinguished by a nanopatterned fluidity, enhanced stability and longevity and thus, provide a dedicated reconstitution matrix for membrane-active peptides and transmembrane proteins. Exciting areas for application of composite S-layer membrane systems concern sensor systems involving specific membrane functions. PMID:19303933

  15. 2D SWIR image sensor with extended wavelength cutoff of 2.5 μm on InP/InGaAs epitaxial wafers with graded buffer layers

    NASA Astrophysics Data System (ADS)

    Mushini, Prabhu; Huang, Wei; Morales, Manuel; Brubaker, Robert; Nguyen, Thuc-Uyen; Dobies, Matt; Zhang, Wei; Gustus, William; Mathews, Gary; Endicter, Scott; Paik, Namwoong

    2016-05-01

    Two-dimensional photo detector arrays with a cutoff wavelength of 2.5 μm were fabricated on InP/InGaAs epitaxial wafers with graded buffer layers in a 320x256 geometry on a 12.5μm pitch. Novel growth and fabrication techniques were employed to fabricate these arrays and optimize the performance. The dark current of the detector was investigated for a wide range of temperatures. The fabricated detector array was mated with a ROIC and packaged with a multi-stage TEC and investigated further at the FPA level. The effect of the graded buffer layers on the sensor performance was investigated and the results were compared to other methods used to develop and fabricate 2D image sensors on extended wavelength materials.

  16. Sensitivity analysis of the non-linear dynamic viscoplastic response of 2-d structures with respect to material parameters

    NASA Technical Reports Server (NTRS)

    Kulkarni, Makarand; Noor, Ahmed K.

    1995-01-01

    A computational procedure is presented for evaluating the sensitivity coefficients of the viscoplastic response of structures subjected to dynamic loading. A state of plane stress is assumed to exist in the structure, a velocity strain-Cauchy stress formulation is used, and the geometric non-linearities arising from large strains are incorporated. The Jaumann rate is used as a frame indifferent stress rate. The material model is chosen to be isothermal viscoplasticity, and an associated flow rule is used with a von Mises effective stress. The equations of motion emanating from a finite element semi-discretization are integrated using an explicit central difference scheme with an implicit stress update. The sensitivity coefficients are evaluated using a direct differentiation approach. Since the domain of integration is the current configuration, the sensitivity coefficients of the spatial derivatives of the shape functions must be included. Numerical results are presented for a thin plate with a central cutout subjected to an in-plane compressive loading. The sensitivity coefficients are generated by evaluating the derivatives of the response quantities with respect to Young's modulus, and two of the material parameters characterizing the viscoplastic response. Time histories of the response and sensitivity coefficients, and spatial distributions at selected times are presented.

  17. Crystal structures and fluorescence properties of two 2D MnII/CdII trimellitic complexes containing terpyridine

    NASA Astrophysics Data System (ADS)

    Ren, Yixia; Chai, Hongmei; Hou, Xiangyang; Wang, Jijiang; Fu, Feng

    2015-12-01

    Hydrothermal reactions of manganese (II)/cadmium(II) salts with 1,2,4-trimellitic acid (H3tma) and 2,2‧:6‧,2-terpyridine (tpy) result in two novel complexes formulated with [M(Htma)(tpy)]·H2O (M = Mn(1) and Cd(2)). X-ray diffraction structural analyses of two complexes reveal they are isomorphic except for the different center metal ions and crystallize in the monoclinic crystal system of P(2)/n space group. The metal ion lies in a six-coordinated distorted octahedral environment coordinated with three Htma2- anions and one tpy ligand. There is an infinite two-dimensional rhombic network based on the metallic dimmers and Htma2- anions with the tpy ligands in void. Furthermore, the tpy ligands from the adjacent network weakly interact each other by π⋯π packing interactions into 3D supramolecular structure. The fluorescence properties could be assigned to the π - π* transition of organic ligands.

  18. Elucidating structural characteristics of biomass using solution-state 2 D NMR with a mixture of deuterated dimethylsulfoxide and hexamethylphosphoramide

    SciTech Connect

    Pu, Yunqiao; Ragauskas, Arthur J.; Yoo, Chang Geun; Li, Mi

    2016-04-26

    In recent developments of NMR methods for characterization of lignocellulosic biomass allow improved understanding of plant cell-wall structures with minimal deconstruction and modification of biomass. This study introduces a new NMR solvent system composed of dimethylsulfoxide (DMSO-d6) and hexamethylphosphoramide (HMPA-d18). HMPA as a co-solvent enhanced swelling and mobility of the biomass samples; thereby it allowed enhancing signals of NMR spectra. Moreover, the structural information of biomass was successfully analyzed by the proposed NMR solvent system (DMSO-d6/HMPA-d18; 4:1, v/v) with different biomass. The proposed bi-solvent system does not require derivatization or isolation of biomass, facilitating a facile sample preparation and involving with no signals overlapping with biomass peaks. Furthermore, it also allows analyzing biomass with a room-temperature NMR probe instead of cryo-probes, which are traditionally used for enhancing signal intensities.

  19. Facile synthesis of 2-D Cu doped WO3 nanoplates with structural, optical and differential anti cancer characteristics

    NASA Astrophysics Data System (ADS)

    Mehmood, Faisal; Iqbal, Javed; Gul, Asma; Ahmed, Waqqar; Ismail, M.

    2017-04-01

    Simple chemical co-precipitation method has been employed to synthesize two dimensional copper (Cu) doped tungsten oxide (WO3) nanoplates. A numbers of characterization techniques have been used to investigate their structural, optical and biocompatible anti cancer properties. The XRD results have confirmed the monoclinic crystal structure of WO3 nanoplates, and also successful doping of Cu ions into the WO3 crystal lattice. The presence of functional groups and chemical bonding have been verified through FTIR and Raman spectroscopy. The SEM images demonstrate that both undoped and Cu doped WO3 samples have squares plate like morphology. The EDX spectra confirm the presence of Cu, W and O ions. Diffuse reflectance spectroscopy (DRS) analysis has revealed a substantial red-shift in the absorption edge and a decrease in the band gap energy of nanoplates with Cu doping. Photoluminescence spectroscopy has been used to study the presence of defects like oxygen vacancies. Furthermore, the differential cytotoxic properties of Cu doped WO3 samples have been evaluated against human breast (MCF-7) and liver (Hep-2) cancer cells with ectocervical epithelial (HECE) healthy cells. The present findings confirm that the Cu doped WO3 nanoplates can be used as an efficient biocompatible anti cancer agent.

  20. Preservation of Archaeal Surface Layer Structure During Mineralization

    NASA Astrophysics Data System (ADS)

    Kish, Adrienne; Miot, Jennyfer; Lombard, Carine; Guigner, Jean-Michel; Bernard, Sylvain; Zirah, Séverine; Guyot, François

    2016-05-01

    Proteinaceous surface layers (S-layers) are highly ordered, crystalline structures commonly found in prokaryotic cell envelopes that augment their structural stability and modify interactions with metals in the environment. While mineral formation associated with S-layers has previously been noted, the mechanisms were unconstrained. Using Sulfolobus acidocaldarius a hyperthermophilic archaeon native to metal-enriched environments and possessing a cell envelope composed only of a S-layer and a lipid cell membrane, we describe a passive process of iron phosphate nucleation and growth within the S-layer of cells and cell-free S-layer “ghosts” during incubation in a Fe-rich medium, independently of metabolic activity. This process followed five steps: (1) initial formation of mineral patches associated with S-layer; (2) patch expansion; (3) patch connection; (4) formation of a continuous mineral encrusted layer at the cell surface; (5) early stages of S-layer fossilization via growth of the extracellular mineralized layer and the mineralization of cytosolic face of the cell membrane. At more advanced stages of encrustation, encrusted outer membrane vesicles are formed, likely in an attempt to remove damaged S-layer proteins. The S-layer structure remains strikingly well preserved even upon the final step of encrustation, offering potential biosignatures to be looked for in the fossil record.

  1. Preservation of Archaeal Surface Layer Structure During Mineralization

    PubMed Central

    Kish, Adrienne; Miot, Jennyfer; Lombard, Carine; Guigner, Jean-Michel; Bernard, Sylvain; Zirah, Séverine; Guyot, François

    2016-01-01

    Proteinaceous surface layers (S-layers) are highly ordered, crystalline structures commonly found in prokaryotic cell envelopes that augment their structural stability and modify interactions with metals in the environment. While mineral formation associated with S-layers has previously been noted, the mechanisms were unconstrained. Using Sulfolobus acidocaldarius a hyperthermophilic archaeon native to metal-enriched environments and possessing a cell envelope composed only of a S-layer and a lipid cell membrane, we describe a passive process of iron phosphate nucleation and growth within the S-layer of cells and cell-free S-layer “ghosts” during incubation in a Fe-rich medium, independently of metabolic activity. This process followed five steps: (1) initial formation of mineral patches associated with S-layer; (2) patch expansion; (3) patch connection; (4) formation of a continuous mineral encrusted layer at the cell surface; (5) early stages of S-layer fossilization via growth of the extracellular mineralized layer and the mineralization of cytosolic face of the cell membrane. At more advanced stages of encrustation, encrusted outer membrane vesicles are formed, likely in an attempt to remove damaged S-layer proteins. The S-layer structure remains strikingly well preserved even upon the final step of encrustation, offering potential biosignatures to be looked for in the fossil record. PMID:27221593

  2. Doubly slanted layer structures in holographic gelatin emulsions: solar concentrators

    NASA Astrophysics Data System (ADS)

    Hung, Jenny; Chan, Po Shan; Sun, Caiming; Wing Ho, Choi; Tam, Wing Yim

    2010-04-01

    We have fabricated doubly slanted layer structures in holographic gelatin emulsions using a double-exposure two-beam interference from two light sources with different wavelengths. The doubly slanted layers, with different spacings and overlapping with each other, are fabricated such that they are slanted in opposite directions making a 30° angle with the holographic plate. The doubly slanted layer structures exhibit photonic stop bands corresponding to the two layered structures. More importantly, diffracted light beams from the slanted layers travel in different directions and emerge, through internal reflections, at the opposite edges of the gelatin plate. The doubly slanted layer structures could be used as solar concentrators such that sunlight is separated into different components and steered directly to photovoltaics with the corresponding wavelength sensitivities to enhance energy conversion efficiency.

  3. Metal free half metallicity in 2D system: structural and magnetic properties of g-C4N3 on BN

    PubMed Central

    Hashmi, Arqum; Hong, Jisang

    2014-01-01

    Synthesis of a half metallic material on a substrate is highly desirable for diverse applications. Herein, we have investigated structural, adsorptive, and magnetic properties of metal free graphitic carbon nitride (g-C4N3) layer on hexagonal BN layer (h-BN) using the optB88-vdW van der Waals density functional theory. It is found that g-C4N3 layer can be adsorbed on BN layer due to the change of lattice constant of the hybridized system. The newly found lattice constant of g-C4N3 was 9.89 Å, which is approximately 2% lower and larger than to those of free standing BN and g-C4N3, respectively. Also, 2 × 2 surface reconstruction geometry predicted in free standing g-C4N3 layer disappears on the BN layer. Interestingly, we have found that metal free half metallic behavior in g-C4N3 can be preserved even on BN layer and the characters of spin polarized planar orbitals suggest that our theoretical prediction can be verified using normal incidence of K-edge X-ray magnetic circular dichroism (XMCD) measurement. PMID:24625438

  4. Shear-layer structures in near-wall turbulence

    NASA Technical Reports Server (NTRS)

    Johansson, A. V.; Alfredsson, P. H.; Kim, J.

    1987-01-01

    The structure of internal shear layer observed in the near-wall region of turbulent flows is investigated by analyzing flow fields obtained from numerical simulations of channel and boundary-layer flows. It is found that the shear layer is an important contributor to the turbulence production. The conditionally averaged production at the center of the structure was almost twice as large as the long-time mean value. The shear-layer structure is also found to retain its coherence over streamwise distances on the order of a thousand viscous length units, and propagates with a constant velocity of about 10.6 u sub rho throughout the near wall region.

  5. Structure of the Human Dopamine D3 Receptor in Complex with a D2/D3 Selective Antagonist

    SciTech Connect

    Chien, Ellen Y.T.; Liu, Wei; Zhao, Qiang; Katritch, Vsevolod; Han, Gye Won; Hanson, Michael A.; Shi, Lei; Newman, Amy Hauck; Javitch, Jonathan A.; Cherezov, Vadim; Stevens, Raymond C.

    2010-11-30

    Dopamine modulates movement, cognition, and emotion through activation of dopamine G protein-coupled receptors in the brain. The crystal structure of the human dopamine D3 receptor (D3R) in complex with the small molecule D2R/D3R-specific antagonist eticlopride reveals important features of the ligand binding pocket and extracellular loops. On the intracellular side of the receptor, a locked conformation of the ionic lock and two distinctly different conformations of intracellular loop 2 are observed. Docking of R-22, a D3R-selective antagonist, reveals an extracellular extension of the eticlopride binding site that comprises a second binding pocket for the aryl amide of R-22, which differs between the highly homologous D2R and D3R. This difference provides direction to the design of D3R-selective agents for treating drug abuse and other neuropsychiatric indications.

  6. Resonant tunneling modulation in quasi-2D Cu2O/SnO2 p-n horizontal-multi-layer heterostructure for room temperature H2S sensor application

    PubMed Central

    Cui, Guangliang; Zhang, Mingzhe; Zou, Guangtian

    2013-01-01

    Heterostructure material that acts as resonant tunneling system is a major scientific challenge in applied physics. Herein, we report a resonant tunneling system, quasi-2D Cu2O/SnO2 p-n heterostructure multi-layer film, prepared by electrochemical deposition in a quasi-2D ultra-thin liquid layer. By applying a special half-sine deposition potential across the electrodes, Cu2O and SnO2 selectively and periodically deposited according to their reduction potentials. The as-prepared heterostructure film displays excellent sensitivity to H2S at room temperature due to the resonant tunneling modulation. Furthermore, it is found that the laser illumination could enhance the gas response, and the mechanism with laser illumination is discussed. It is the first report on gas sensing application of resonant tunneling modulation. Hence, heterostructure material act as resonant tunneling system is believed to be an ideal candidate for further improvement of room temperature gas sensing. PMID:23409241

  7. Experimentally excellent beaming in a two-layer dielectric structure

    DOE PAGES

    Tasolamprou, Anna C.; Zhang, Lei; Kafesaki, Maria; ...

    2014-09-15

    We demonstrate both experimentally and theoretically that a two-layer dielectric structure can provide collimation and enhanced transmission of a Gaussian beam passing through it. This is due to formation of surface localized states along the layered structure and the coupling of these states to outgoing propagating waves. As a result, a system of multiple cascading two-layers can sustain the beaming for large propagation distances.

  8. Electroluminescent apparatus having a structured luminescence conversion layer

    DOEpatents

    Krummacher, Benjamin Claus

    2008-09-02

    An apparatus such as a light source is disclosed which has an OLED device and a structured luminescence conversion layer disposed on the substrate or transparent electrode of said OLED device and on the exterior of said OLED device. The structured luminescence conversion layer contains color-changing and non-color-changing regions arranged in a particular pattern.

  9. Multi-layer laminate structure and manufacturing method

    DOEpatents

    Keenihan, James R.; Cleereman, Robert J.; Eurich, Gerald; Graham, Andrew T.; Langmaid, Joe A.

    2013-01-29

    The present invention is premised upon a multi-layer laminate structure and method of manufacture, more particularly to a method of constructing the multi-layer laminate structure utilizing a laminate frame and at least one energy activated flowable polymer.

  10. Multi-layer laminate structure and manufacturing method

    DOEpatents

    Keenihan, James R [Midland, MI; Cleereman, Robert J [Midland, MI; Eurich, Gerald [Merrill, MI; Graham, Andrew T [Midland, MI; Langmaid, Joe A [Caro, MI

    2012-04-24

    The present invention is premised upon a multi-layer laminate structure and method of manufacture, more particularly to a method of constructing the multi-layer laminate structure utilizing a laminate frame and at least one energy activated flowable polymer.

  11. Two Keggin-type heteropolytungstates with transition metal as a central atom: Crystal structure and magnetic study with 2D-IR correlation spectroscopy

    SciTech Connect

    Chai, Feng; Chen, YiPing; You, ZhuChai; Xia, ZeMin; Ge, SuZhi; Sun, YanQiong; Huang, BiHua

    2013-06-01

    Two Keggin-type heteropolytungstates, [Co(phen)₃]₃[CoW₁₂O₄₀]·9H₂O 1 (phen=1,10-phenanthroline) and [Fe(phen)₃]₂[FeW₁₂O₄₀]·H₃O·H₂O 2, have been synthesized via the hydrothermal technique and characterized by single crystal X-ray diffraction analyses, IR, XPS, TG analysis, UV–DRS, XRD, thermal-dependent and magnetic-dependent 2D-COS IR (two-dimensional infrared correlation spectroscopy). Crystal structure analysis reveals that the polyanions in compound 1 are linked into 3D supramolecule through hydrogen bonding interactions between lattice water molecules and terminal oxygen atoms of polyanion units, and [Co(phen)₃]²⁺ cations distributed in the polyanion framework with many hydrogen bonding interactions. The XPS spectra indicate that all the Co atoms in 1 are +2 oxidation state, the Fe atoms in 2 existing with +2 and +3 mixed oxidation states. - Graphical abstract: The magnetic-dependent synchronous 2D correlation IR spectra of 1 (a), 2 (b) over 0–50 mT in the range of 600–1000 cm⁻¹, the obvious response indicate two Keggin polyanions skeleton susceptible to applied magnetic field. Highlights: • Two Keggin-type heteropolytungstates with transition metal as a central atom has been obtained. • Compound 1 forms into 3D supramolecular architecture through hydrogen bonding between water molecules and polyanions. • Magnetic-dependent 2D-IR correlation spectroscopy was introduced to discuss the magnetism of polyoxometalate.

  12. 3-D Metal-Organic Framework Based on Cationic 2-D Cuprate Layers: Cu3(OH)4[C10H6(SO3)2

    DTIC Science & Technology

    2009-11-10

    coordination number, and choice of organic linking agent. Solvothermal synthesis is an effective methodology for growing crystals of MOFcompounds and...with the values of 22.04%, 1.84%, and 0.00% calculated from the structure solution, respec- tively. Characterization Methods . Powder X-ray diffraction...31.09 99.9% absorption correction empirical max. and min transmission 0.8384 and 0.6416 refinement method full-matrix least-squares on F2 data

  13. Cu-PDC-bpa solid coordination frameworks (PDC=2,5-pyrindinedicarboxylate; bpa=1,2-DI(4-pyridil)ethane)): 2D and 3D structural flexibility producing a 3-c herringbone array next to ideal

    NASA Astrophysics Data System (ADS)

    Llano-Tomé, Francisco; Bazán, Begoña; Urtiaga, Miren-Karmele; Barandika, Gotzone; Antonia Señarís-Rodríguez, M.; Sánchez-Andújar, Manuel; Arriortua, María-Isabel

    2015-10-01

    Combination of polycarboxylate anions and dipyridyl ligands is an effective strategy to produce solid coordination frameworks (SCF) which are crystalline materials based on connections between metal ions through organic ligands. In this context, this work is focused on two novel CuII-based SCFs exhibiting PDC (2,5-pyridinedicarboxylate) and bpa (1,2-di(4-pyridyl)ethane), being the first structures reported in literature containing both ligands. Chemical formula are [Cu2[(PDC)2(bpa)(H2O)2]·3H2O·DMF (1), and [Cu2(PDC)2(bpa)(H2O)2]·7H2O (2), where DMF is dimethylformamide. Compounds 1 and 2 have been characterized by means of X-ray diffraction (XRD), infrared spectroscopy (IR), thermogravimetric (TG) analysis, differential thermal analysis (DTA) and dielectric measurements. The crystallographic analysis revealed that compounds 1 and 2 can be described as herringbone-type layers formed by helicoidal Cu-PDC-Cu chains connected through bpa ligands. Solvent molecules are crystallized between the layers, providing the inter-layer connections through hydrogen bonds. Differences between both compounds are attributable to the flexibility of bpa (in 2D) as well as to the 3D packing of the layers which is solvent dependent. This fact results in the fact that compound 2 is the most regular 3-c herringbone array reported so far. The structural dynamism of these networks is responsible for the crystalline to-amorphous to-crystalline (CAC) transformation from compound 1 to compound 2. Crystallochemical features for both compounds have also been studied and compared to similar 3-connected herringbone-arrays.

  14. The Langley Stability and Transition Analysis Code (LASTRAC) : LST, Linear and Nonlinear PSE for 2-D, Axisymmetric, and Infinite Swept Wing Boundary Layers

    NASA Technical Reports Server (NTRS)

    Chang, Chau-Lyan

    2003-01-01

    layers.

  15. Effect of velocity ratio on coherent-structure dynamics in turbulent free shear layers

    NASA Astrophysics Data System (ADS)

    Suryanarayanan, Saikishan; Narasimha, Roddam

    2014-11-01

    The relevance of the vortex-gas model to the large scale dynamics of temporally evolving turbulent free shear layers has been established by extensive simulations (Phys. Rev. E 89, 013009 (2014)). The effects of velocity ratio (r =U2 /U1) on shear layer dynamics are revealed by spatially evolving vortex-gas shear-layer simulations using a computational model based on Basu et al. (Appl. Math. Modelling 19, (1995)), but with a crucial improvement that ensures conservation of global circulation. The simulations show that the initial conditions and downstream boundaries can significantly affect the flow over substantial part of the domain, but the equilibrium spread rate is a universal function of r, and is within the experimental scatter. The spread in the r = 0 limit is higher than Galilean-transformed temporal value. The present 2D simulations at r = 0 show continuous growth of structures, while merger-dominated evolution is observed for r = 0 . 23 (and higher). These two mechanisms were observed across the same two values of r in the experiments of D'Ovidio & Coats (J. Fluid Mech. 737, 2013), but the continuous growth was instead attributed to mixing-transition and 3D. The 2D mechanisms responsible for the observed continuous growth of structures are analyzed in detail. Supported in part by RN/Intel/4288 and RN/DRDO/4124.

  16. The Growth Mechanism of Transition Metal Dichalcogenides by using Sulfurization of Pre-deposited Transition Metals and the 2D Crystal Hetero-structure Establishment

    PubMed Central

    Wu, Chong-Rong; Chang, Xiang-Rui; Wu, Chao-Hsin; Lin, Shih-Yen

    2017-01-01

    A growth model is proposed for the large-area and uniform MoS2 film grown by using sulfurization of pre-deposited Mo films on sapphire substrates. During the sulfurization procedure, the competition between the two mechanisms of the Mo oxide segregation to form small clusters and the sulfurization reaction to form planar MoS2 film is determined by the amount of background sulfur. Small Mo oxide clusters are observed under the sulfur deficient condition, while large-area and complete MoS2 films are obtained under the sulfur sufficient condition. Precise layer number controllability is also achieved by controlling the pre-deposited Mo film thicknesses. The drain currents in positive dependence on the layer numbers of the MoS2 transistors with 1-, 3- and 5- layer MoS2 have demonstrated small variation in material characteristics between each MoS2 layer prepared by using this growth technique. By sequential transition metal deposition and sulfurization procedures, a WS2/MoS2/WS2 double hetero-structure is demonstrated. Large-area growth, layer number controllability and the possibility of hetero-structure establishment by using sequential metal deposition and following sulfurization procedures have revealed the potential of this growth technique for practical applications. PMID:28176836

  17. The Growth Mechanism of Transition Metal Dichalcogenides by using Sulfurization of Pre-deposited Transition Metals and the 2D Crystal Hetero-structure Establishment

    NASA Astrophysics Data System (ADS)

    Wu, Chong-Rong; Chang, Xiang-Rui; Wu, Chao-Hsin; Lin, Shih-Yen

    2017-02-01

    A growth model is proposed for the large-area and uniform MoS2 film grown by using sulfurization of pre-deposited Mo films on sapphire substrates. During the sulfurization procedure, the competition between the two mechanisms of the Mo oxide segregation to form small clusters and the sulfurization reaction to form planar MoS2 film is determined by the amount of background sulfur. Small Mo oxide clusters are observed under the sulfur deficient condition, while large-area and complete MoS2 films are obtained under the sulfur sufficient condition. Precise layer number controllability is also achieved by controlling the pre-deposited Mo film thicknesses. The drain currents in positive dependence on the layer numbers of the MoS2 transistors with 1-, 3- and 5- layer MoS2 have demonstrated small variation in material characteristics between each MoS2 layer prepared by using this growth technique. By sequential transition metal deposition and sulfurization procedures, a WS2/MoS2/WS2 double hetero-structure is demonstrated. Large-area growth, layer number controllability and the possibility of hetero-structure establishment by using sequential metal deposition and following sulfurization procedures have revealed the potential of this growth technique for practical applications.

  18. Cu-PDC-bpa solid coordination frameworks (PDC=2,5-pyrindinedicarboxylate; bpa=1,2-DI(4-pyridil)ethane)): 2D and 3D structural flexibility producing a 3-c herringbone array next to ideal

    SciTech Connect

    Llano-Tomé, Francisco; Bazán, Begoña; Urtiaga, Miren-Karmele; Barandika, Gotzone; Antonia Señarís-Rodríguez, M.; and others

    2015-10-15

    Combination of polycarboxylate anions and dipyridyl ligands is an effective strategy to produce solid coordination frameworks (SCF) which are crystalline materials based on connections between metal ions through organic ligands. In this context, this work is focused on two novel Cu{sup II}-based SCFs exhibiting PDC (2,5-pyridinedicarboxylate) and bpa (1,2-di(4-pyridyl)ethane), being the first structures reported in literature containing both ligands. Chemical formula are [Cu{sub 2}[(PDC){sub 2}(bpa)(H{sub 2}O){sub 2}]·3H{sub 2}O·DMF (1), and [Cu{sub 2}(PDC){sub 2}(bpa)(H{sub 2}O){sub 2}]·7H{sub 2}O (2), where DMF is dimethylformamide. Compounds 1 and 2 have been characterized by means of X-ray diffraction (XRD), infrared spectroscopy (IR), thermogravimetric (TG) analysis, differential thermal analysis (DTA) and dielectric measurements. The crystallographic analysis revealed that compounds 1 and 2 can be described as herringbone-type layers formed by helicoidal Cu-PDC-Cu chains connected through bpa ligands. Solvent molecules are crystallized between the layers, providing the inter-layer connections through hydrogen bonds. Differences between both compounds are attributable to the flexibility of bpa (in 2D) as well as to the 3D packing of the layers which is solvent dependent. This fact results in the fact that compound 2 is the most regular 3-c herringbone array reported so far. The structural dynamism of these networks is responsible for the crystalline to-amorphous to-crystalline (CAC) transformation from compound 1 to compound 2. Crystallochemical features for both compounds have also been studied and compared to similar 3-connected herringbone-arrays. - Graphical abstract: Cu-PDC-bpa 3-c herringbone arrays. - Highlights: • The most ideal herringbone array reported so far is a Cu-PDC-bpa SCF. • Conformational freedom of bpa results in 2D and 3D flexibility of the SCFs. • The flexibility of the SCFs is related to a phase transformation. • Dielectric

  19. Momentum-resolved view of mixed 2D and nonbulklike 3D electronic structure of the surface state on SrTiO3 (001)

    NASA Astrophysics Data System (ADS)

    Plumb, N. C.; Salluzzo, M.; Razzoli, E.; Mansson, M.; Krempasky, J.; Matt, C. E.; Schmitt, T.; Shi, M.; Mesot, J.; Patthey, L.; Radovic, M.

    2014-03-01

    The recent discovery of a metallic surface state on SrTiO3 may open a route to simplified low-dimensional oxide-based conductors, as well as give new insights into interfacial phenomena in heterostructures such as LaAlO3/SrTiO3. Our recent angle-resolved photoemission spectroscopy (ARPES) study demonstrates that not only quasi-2D but also non-bulklike 3D Fermi surface components make up the surface state. Like their more 2D counterparts, the size and character of the 3D components are fixed with respect to a broad range of sample preparations. As seen in previous studies, the surface state can be ``prepared'' by photon irradiation under UHV conditions. An extremely high fraction of the surface valence states are affected by this process, especially in relation to the stability of oxygen core level intensity during the same exposure, which points to a key role of electronic/structural changes that spread over the surface as the metal emerges.

  20. Simple synthesis of PbSe nanocrystals and their self-assembly into 2D ‘flakes’ and 1D ‘ribbons’ structures

    SciTech Connect

    Díaz-Torres, E.; Ortega-López, M.; Matsumoto, Y.; Santoyo-Salazar, J.

    2016-08-15

    Highlights: • PbSe is obtained in a simple way by the co-precipitation method at low-temperature. • The structural, morphological and optical properties of PbSe were studied. • Adding NH{sub 4}OH to the precursor solutions influences on the morphology. • 2D- and 1D-PbSe structures assemble by oriented attachment. • PbSe can be a potential candidate for thermoelectric applications. - Abstract: This work presents a simple and low-temperature method to prepare a variety of Lead selenide (PbSe) nanostructures, using aqueous solutions of Pb(NO{sub 3}){sub 2} and NaHSe. Nanostructures with different morphology were obtained by varying the Pb:Se molar ratio, as well as the mixing sequence of NH{sub 4}OH with either Pb(NO{sub 3}){sub 2} or NaHSe. Nanoparticles with different shapes (spherical and octahedral), and self-assembled structures (flakes and ribbons) were observed by Transmission Electron Microscopy. X-ray results confirmed that the PbSe rock-salt crystalline structure was obtained for all of the prepared samples. The crystal size is in the order of 7.3 to 8.9 nm for single nanocrystals. The absorption spectra of the samples show exciton absorption bands at 1395 nm and 1660 nm. This material could be used to develop more advanced structures for thermoelectric generators.

  1. Elastodynamic behavior of the three dimensional layer-by-layer metamaterial structure

    SciTech Connect

    Aravantinos-Zafiris, N.; Sigalas, M. M.; Economou, E. N.

    2014-10-07

    In this work, we numerically investigate for the first time the elastodynamic behavior of a three dimensional layer-by-layer rod structure, which is easy to fabricate and has already proved to be very efficient as a photonic crystal. The Finite Difference Time Domain method was used for the numerical calculations. For the rods, several materials were examined and the effects of all the geometric parameters of the structure were also numerically investigated. Additionally, two modifications of the structure were included in our calculations. The results obtained here (for certain geometric parameters), exhibiting a high ratio of longitudinal over transverse sound velocity and therefore a close approach to ideal pentamode behavior over a frequency range, clearly show that the layer-by-layer rod structure, besides being an efficient photonic crystal, is a very serious contender as an elastodynamic metamaterial.

  2. Elastodynamic behavior of the three dimensional layer-by-layer metamaterial structure

    NASA Astrophysics Data System (ADS)

    Aravantinos-Zafiris, N.; Sigalas, M. M.; Economou, E. N.

    2014-10-01

    In this work, we numerically investigate for the first time the elastodynamic behavior of a three dimensional layer-by-layer rod structure, which is easy to fabricate and has already proved to be very efficient as a photonic crystal. The Finite Difference Time Domain method was used for the numerical calculations. For the rods, several materials were examined and the effects of all the geometric parameters of the structure were also numerically investigated. Additionally, two modifications of the structure were included in our calculations. The results obtained here (for certain geometric parameters), exhibiting a high ratio of longitudinal over transverse sound velocity and therefore a close approach to ideal pentamode behavior over a frequency range, clearly show that the layer-by-layer rod structure, besides being an efficient photonic crystal, is a very serious contender as an elastodynamic metamaterial.

  3. Magnetism in structures with ferromagnetic and superconducting layers

    NASA Astrophysics Data System (ADS)

    Zhaketov, V. D.; Nikitenko, Yu. V.; Radu, F.; Petrenko, A. V.; Csik, A.; Borisov, M. M.; Mukhamedzhanov, E. Kh.; Aksenov, V. L.

    2017-01-01

    The influence of superconductivity on ferromagnetism in the layered Ta/V/Fe1- x V x /V/Fe1- x V x /Nb/Si structures consisting of ferromagnetic and superconducting layers is studied using polarized neutron reflection and scattering. It is experimentally shown that magnetic structures with linear sizes from 5 nm to 30 μm are formed in these layered structures at low temperatures. The magnetization of the magnetic structures is suppressed by superconductivity at temperatures below the superconducting transition temperatures in the V and Nb layers. The magnetic states of the structures are shown to undergo relaxation over a wide magnetic-field range, which is caused by changes in the states of clusters, domains, and Abrikosov vortices.

  4. Vertical heterostructures based on graphene and other 2D materials

    SciTech Connect

    Antonova, I. V.

    2016-01-15

    Recent advances in the fabrication of vertical heterostructures based on graphene and other dielectric and semiconductor single-layer materials, including hexagonal boron nitride and transition-metal dichalcogenides, are reviewed. Significant progress in this field is discussed together with the great prospects for the development of vertical heterostructures for various applications, which are associated, first of all, with reconsideration of the physical principles of the design and operation of device structures based on graphene combined with other 2D materials.

  5. Cellulose Structural Polymorphism in Plant Primary Cell Walls Investigated by High-Field 2D Solid-State NMR Spectroscopy and Density Functional Theory Calculations.

    PubMed

    Wang, Tuo; Yang, Hui; Kubicki, James D; Hong, Mei

    2016-06-13

    The native cellulose of bacterial, algal, and animal origins has been well studied structurally using X-ray and neutron diffraction and solid-state NMR spectroscopy, and is known to consist of varying proportions of two allomorphs, Iα and Iβ, which differ in hydrogen bonding, chain packing, and local conformation. In comparison, cellulose structure in plant primary cell walls is much less understood because plant cellulose has lower crystallinity and extensive interactions with matrix polysaccharides. Here we have combined two-dimensional magic-angle-spinning (MAS) solid-state nuclear magnetic resonance (solid-state NMR) spectroscopy at high magnetic fields with density functional theory (DFT) calculations to obtain detailed information about the structural polymorphism and spatial distributions of plant primary-wall cellulose. 2D (13)C-(13)C correlation spectra of uniformly (13)C-labeled cell walls of several model plants resolved seven sets of cellulose chemical shifts. Among these, five sets (denoted a-e) belong to cellulose in the interior of the microfibril while two sets (f and g) can be assigned to surface cellulose. Importantly, most of the interior cellulose (13)C chemical shifts differ significantly from the (13)C chemical shifts of the Iα and Iβ allomorphs, indicating that plant primary-wall cellulose has different conformations, packing, and hydrogen bonding from celluloses of other organisms. 2D (13)C-(13)C correlation experiments with long mixing times and with water polarization transfer revealed the spatial distributions and matrix-polysaccharide interactions of these cellulose structures. Celluloses f and g are well mixed chains on the microfibril surface, celluloses a and b are interior chains that are in molecular contact with the surface chains, while cellulose c resides in the core of the microfibril, outside spin diffusion contact with the surface. Interestingly, cellulose d, whose chemical shifts differ most significantly from those of

  6. Cellulose Structural Polymorphism in Plant Primary Cell Walls Investigated by High-Field 2D Solid-State NMR Spectroscopy and Density Functional Theory Calculations

    PubMed Central

    Wang, Tuo; Yang, Hui; Kubicki, James D.; Hong, Mei

    2017-01-01

    The native cellulose of bacterial, algal, and animal origins has been well studied structurally using X-ray and neutron diffraction and solid-state NMR spectroscopy, and is known to consist of varying proportions of two allomorphs, Iα and Iβ, which differ in hydrogen bonding, chain packing, and local conformation. In comparison, cellulose structure in plant primary cell walls is much less understood because plant cellulose has lower crystallinity and extensive interactions with matrix polysaccharides. Here we have combined two-dimensional magic-angle-spinning (MAS) solid-state nuclear magnetic resonance (solid-state NMR) spectroscopy at high magnetic fields with density functional theory (DFT) calculations to obtain detailed information about the structural polymorphism and spatial distributions of plant primary-wall cellulose. 2D 13C-13C correlation spectra of uniformly 13C-labeled cell walls of several model plants resolved seven sets of cellulose chemical shifts. Among these, five sets (denoted a-e) belong to cellulose in the interior of the microfibril while two sets (f and g) can be assigned to surface cellulose. Importantly, most of the interior cellulose 13C chemical shifts differ significantly from the 13C chemical shifts of the Iα and Iβ allomorphs, indicating that plant primary-wall cellulose has different conformations, packing and hydrogen bonding from celluloses of other organisms. 2D 13C-13C correlation experiments with long mixing times and with water polarization transfer revealed the spatial distributions and matrix-polysaccharide interactions of these cellulose structures. Cellulose f and g are well mixed chains on the microfibril surface, cellulose a and b are interior chains that are in molecular contact with the surface chains, while cellulose c resides in the core of the microfibril, outside spin diffusion contact with the surface. Interestingly, cellulose d, whose chemical shifts differ most significantly from those of bacterial, algal

  7. Flow around new wind fence with multi-scale fractal structure in an atmospheric boundary layer

    NASA Astrophysics Data System (ADS)

    McClure, Sarah; Lee, Sang-Joon; Zhang, Wei

    2015-11-01

    Understanding and controlling atmospheric boundary-layer flows with engineered structures, such as porous wind fences or windbreaks, has been of great interest to the fluid mechanics and wind engineering community. Previous studies found that the regular mono-scale grid fence of 50% porosity and a bottom gap of 10% of the fence height are considered to be optimal over a flat surface. Significant differences in turbulent flow structure have recently been noted behind multi-scale fractal wind fences, even with the same porosity. In this study, wind-tunnel tests on the turbulent flow and the turbulence kinetic energy transport of 1D and 2D multi-scale fractal fences under atmospheric boundary-layer were conducted. Velocity fields around the fractal fences were systematically measured using Particle Image Velocimetry to uncover effects of key parameters on turbulent flows around the fences at a Reynolds number of approximately 3.6x104 based on the free-stream speed and fence height. The turbulent flow structures induced by specific 1D/2D multi-scale fractal wind fences were compared to those of a conventional grid fence. The present results would contribute to the design of new-generation wind fences to reduce snow/sand deposition on critical infrastructure such as roads and bridges.

  8. Structural requirements of 3-carboxyl-4(1H)-quinolones as potential antimalarials from 2D and 3D QSAR analysis.

    PubMed

    Li, Jiazhong; Li, Shuyan; Bai, Chongliang; Liu, Huanxiang; Gramatica, Paola

    2013-07-01

    Malaria is a fatal tropical and subtropical disease caused by the protozoal species Plasmodium. Many commonly available antimalarial drugs and therapies are becoming ineffective because of the emergence of multidrug resistant Plasmodium falciparum, which drives the need for the development of new antimalarial drugs. Recently, a series of 3-carboxyl-4(1H)-quinolone analogs, derived from the famous compound endochin, were reported as promising candidates for orally efficacious antimalarials. In this study, to analyze the structure-activity relationships (SAR) of these quinolones and investigate the structural requirements for antimalarial activity, the 2D multiple linear regressions (MLR) method and 3D comparative molecular field analysis (CoMFA) and comparative molecular similarity indices analysis (CoMSIA) methods are employed to evolve different QSAR models. All these models give satisfactory results with highly accurate fitting and strong external predictive abilities for chemicals not used in model development. Furthermore, the contour maps from 3D models can provide an intuitive understanding of the key structure features responsible for the antimalarial activities. In conclusion, we summarize the detailed position-specific structural requirements of these derivatives accordingly. All these results are helpful for the rational design of new compounds with higher antimalarial bioactivities.

  9. Booming Development of Group IV-VI Semiconductors: Fresh Blood of 2D Family.

    PubMed

    Zhou, Xing; Zhang, Qi; Gan, Lin; Li, Huiqiao; Xiong, Jie; Zhai, Tianyou

    2016-12-01

    As an important component of 2D layered materials (2DLMs), the 2D group IV metal chalcogenides (GIVMCs) have drawn much attention recently due to their earth-abundant, low-cost, and environmentally friendly characteristics, thus catering well to the sustainable electronics and optoelectronics applications. In this instructive review, the booming research advancements of 2D GIVMCs in the last few years have been presented. First, the unique crystal and electronic structures are introduced, suggesting novel physical properties. Then the various methods adopted for synthesis of 2D GIVMCs are summarized such as mechanical exfoliation, solvothermal method, and vapor deposition. Furthermore, the review focuses on the applications in field effect transistors and photodetectors based on 2D GIVMCs, and extends to flexible devices. Additionally, the 2D GIVMCs based ternary alloys and heterostructures have also been presented, as well as the applications in electronics and optoelectronics. Finally, the conclusion and outlook have also been presented in the end of the review.

  10. Hybrid materials based on novel 2D lanthanide coordination polymers covalently bonded to amine-modified SBA-15 and MCM-41: assembly, characterization, structural features, thermal and luminescence properties.

    PubMed

    Wang, Jun; Dou, Wei; Kirillov, Alexander M; Liu, Weisheng; Xu, Cailing; Fang, Ran; Yang, Lizi

    2016-11-22

    Three novel 2D coordination polymers [Tb2(μ4-L)2(μ-HL)(μ-HCOO)(DEF)]n (Tb-L), [Eu(μ4-L)(L)(H2O)2]n (Eu-L), and [Nd(μ4-L)(L)(H2O)2]n (Nd-L) were assembled from the corresponding lanthanide(iii) nitrates and 5 methoxy-(4-benzaldehyde)-1,3-benzenedicarboxylic acid (H2L) as a main multifunctional building block bearing carboxylate and aldehyde functional groups, using H2O/DEF {DEF = N,N-diethylformamide} as a reaction medium. The obtained coordination polymers were isolated as stable microcrystalline solids and fully characterized by elemental analysis, FT-IR spectroscopy, TGA, BET, PXRD, and single-crystal X-ray diffraction methods. Their structures feature intricate 2D metal-organic networks, which were topologically classified as underlying layers with the 4,6L26 (for Tb-L) or sql (for Eu-L and Nd-L) topologies. Besides, a novel series of mesoporous hybrid materials wherein the Tb-L, Eu-L, or Nd-L coordination polymers are covalently grafted into the amine-functionalized SBA-15-NH2 or MCM-41-NH2 matrices (via the formation of Schiff-base groups) was also synthesized and fully characterized. These hybrid materials show high thermal and photoluminescence stability, as well as remarkable chemical resistance to boiling water, and acidic or alkaline medium. Luminescent properties of the parent coordination polymers and derived hybrid materials are investigated in detail, showing that the latter combine the luminescent characteristics (intense green or red emissions and excellent stability) of lanthanide coordination polymers and structural features of ordered mesoporous silica molecular sieves. Moreover, light emitting devices were assembled, by coating the hybrid materials onto the surface of UV-LED bulbs, and showed excellent light emitting properties.

  11. Evaluating the structural identifiability of the parameters of the EBPR sub-model in ASM2d by the differential algebra method.

    PubMed

    Zhang, Tian; Zhang, Daijun; Li, Zhenliang; Cai, Qing

    2010-05-01

    The calibration of ASMs is a prerequisite for their application to simulation of a wastewater treatment plant. This work should be made based on the evaluation of structural identifiability of model parameters. An EBPR sub-model including denitrification phosphorus removal has been incorporated in ASM2d. Yet no report is presented on the structural identifiability of the parameters in the EBPR sub-model. In this paper, the differential algebra approach was used to address this issue. The results showed that the structural identifiability of parameters in the EBPR sub-model could be improved by increasing the measured variables. The reduction factor eta(NO)(3) was identifiable when combined data of aerobic process and anoxic process were assumed. For K(PP), X(PAO) and q(PHA) of the anaerobic process to be uniquely identifiable, one of them is needed to be determined by other ways. Likewise, if prior information on one of the parameters, K(PHA), X(PAO) and q(PP) of the aerobic process, is known, all the parameters are identifiable. The above results could be of interest to the parameter estimation of the EBPR sub-model. The algorithm proposed in the paper is also suitable for other sub-models of ASMs.

  12. Alternating zinc fingers in the human male associated protein ZFY: 2D NMR structure of an even finger and implications for jumping-linker DNA recognition

    SciTech Connect

    Kochoyan, M.; Havel, T.F.; Dahl, C.E. ); Nguyen, D.T.; Keutmann, H.T. ); Weiss, M.A. Massachusetts General Hospital, Boston )

    1991-04-09

    ZFY, a sex-related Zn-finger protein encoded by the human Y chromosome, is distinguished from the general class of Zn-finger proteins by the presence of a two-finger repeat. Whereas odd-numbered domains and linkers fit a general consensus, even-numbered domains and linkers exhibit systematic differences. Because this alternation may have fundamental implications for the mechanism of protein-DNA recognition, the authors have undertaken biochemical and structural studies of fragments of ZFY. They describe here the solution structure of a representative nonconsensus (even-numbered) Zn finger based on 2D NMR studies of a 30-residue peptide. Structural modeling by distance geometry and simulated annealing (DG/SA) demonstrates that this peptide folds as a miniglobular domain containing a C-terminal {beta}-hairpin and N-terminal {alpha}-helix ({beta}{beta}{alpha} motif). These features are similar to (but not identical with) those previously described in consensus-type Zn fingers (derived from ADR1 and Xfin); the similarities suggest that even and odd ZFY domains bind DNA by a common mechanism. A model of the protein-DNA complex (designated the jumping-linker model) is presented and discussed in terms of the ZFY two-finger repeat. In this model every other linker is proposed to cross the minor groove by means of a putative finger/linker submotif HX{sub 4}HX{sub 3}-hydrophobic residue-X{sub 3}.

  13. 2D magnetotelluric imaging of the Anqing-Guichi ore district, Yangtze metallogenic belt, eastern China: An insight into the crustal structure and tectonic units

    NASA Astrophysics Data System (ADS)

    Chen, Xiangbin; Yan, Jiayong

    2016-08-01

    Two parallel NW-trending magnetotelluric (MT) profiles were placed perpendicularly to the main structures of the Anqing-Guichi ore district, one of the seven ore districts in the middle-lower Yangtze River metallogenic belt of eastern China. In October-December 2013, the MT data acquisition was carried out at 117 sites with 0.5-1 km site spacing. The MT data has a good quality in the frequency range between 320 and 0.01 Hz. The dimensionality analysis and 2D resistivity inversion results indicate that: (1) the deep of the ore district with three-dimensional structural characteristics, but two-dimensional structural characteristics for shallow; (2) there is a clear correlation between resistivity and the main geological units of the ore district, as well as correlation with mapped surface faults; (3) the Gandan deep fault (GDF) and Jiangnan deep fault (JNF) extend from the surface to 10 km deep, with dip of NW45°, and dip angles larger than 60°. A series of NE-trending acidic intrusive rocks were controlled by the GDF.

  14. Metrology for graphene and 2D materials

    NASA Astrophysics Data System (ADS)

    Pollard, Andrew J.

    2016-09-01

    The application of graphene, a one atom-thick honeycomb lattice of carbon atoms with superlative properties, such as electrical conductivity, thermal conductivity and strength, has already shown that it can be used to benefit metrology itself as a new quantum standard for resistance. However, there are many application areas where graphene and other 2D materials, such as molybdenum disulphide (MoS2) and hexagonal boron nitride (h-BN), may be disruptive, areas such as flexible electronics, nanocomposites, sensing and energy storage. Applying metrology to the area of graphene is now critical to enable the new, emerging global graphene commercial world and bridge the gap between academia and industry. Measurement capabilities and expertise in a wide range of scientific areas are required to address this challenge. The combined and complementary approach of varied characterisation methods for structural, chemical, electrical and other properties, will allow the real-world issues of commercialising graphene and other 2D materials to be addressed. Here, examples of metrology challenges that have been overcome through a multi-technique or new approach are discussed. Firstly, the structural characterisation of defects in both graphene and MoS2 via Raman spectroscopy is described, and how nanoscale mapping of vacancy defects in graphene is also possible using tip-enhanced Raman spectroscopy (TERS). Furthermore, the chemical characterisation and removal of polymer residue on chemical vapour deposition (CVD) grown graphene via secondary ion mass spectrometry (SIMS) is detailed, as well as the chemical characterisation of iron films used to grow large domain single-layer h-BN through CVD growth, revealing how contamination of the substrate itself plays a role in the resulting h-BN layer. In addition, the role of international standardisation in this area is described, outlining the current work ongoing in both the International Organization of Standardization (ISO) and the

  15. Cocured damped layers in composite structure

    SciTech Connect

    Rotz, C.A. ); Barrett, D.J. )

    1992-01-01

    A study was made on the feasibility of laminating and cocuring graphite fiber-epoxy prepreg with plies of commercially available damping materials for form beams and hat-stiffened panels. Experiments showed that cocuring did not adversely affect the damping materials and that excellent structural damping properties could be obtained. The construction of the hat-stiffened panels proved that complex parts containing damping materials could be fabricated. Dynamic testing of these components showed that internal architectural features could be designed to promote damping in primary structure.

  16. Superconducting structure with layers of niobium nitride and aluminum nitride

    DOEpatents

    Murduck, James M.; Lepetre, Yves J.; Schuller, Ivan K.; Ketterson, John B.

    1989-01-01

    A superconducting structure is formed by depositing alternate layers of aluminum nitride and niobium nitride on a substrate. Deposition methods include dc magnetron reactive sputtering, rf magnetron reactive sputtering, thin-film diffusion, chemical vapor deposition, and ion-beam deposition. Structures have been built with layers of niobium nitride and aluminum nitride having thicknesses in a range of 20 to 350 Angstroms. Best results have been achieved with films of niobium nitride deposited to a thickness of approximately 70 Angstroms and aluminum nitride deposited to a thickness of approximately 20 Angstroms. Such films of niobium nitride separated by a single layer of aluminum nitride are useful in forming Josephson junctions. Structures of 30 or more alternating layers of niobium nitride and aluminum nitride are useful when deposited on fixed substrates or flexible strips to form bulk superconductors for carrying electric current. They are also adaptable as voltage-controlled microwave energy sources.

  17. Superconducting structure with layers of niobium nitride and aluminum nitride

    DOEpatents

    Murduck, J.M.; Lepetre, Y.J.; Schuller, I.K.; Ketterson, J.B.

    1989-07-04

    A superconducting structure is formed by depositing alternate layers of aluminum nitride and niobium nitride on a substrate. Deposition methods include dc magnetron reactive sputtering, rf magnetron reactive sputtering, thin-film diffusion, chemical vapor deposition, and ion-beam deposition. Structures have been built with layers of niobium nitride and aluminum nitride having thicknesses in a range of 20 to 350 Angstroms. Best results have been achieved with films of niobium nitride deposited to a thickness of approximately 70 Angstroms and aluminum nitride deposited to a thickness of approximately 20 Angstroms. Such films of niobium nitride separated by a single layer of aluminum nitride are useful in forming Josephson junctions. Structures of 30 or more alternating layers of niobium nitride and aluminum nitride are useful when deposited on fixed substrates or flexible strips to form bulk superconductors for carrying electric current. They are also adaptable as voltage-controlled microwave energy sources. 8 figs.

  18. Fourier Transform Microwave Spectrum of Propene-3-d1 (CH2=CHCH2D), Quadrupole Coupling Constants of Deuterium and a Semiexperimental Equilibrium Structure of Propene.

    PubMed

    Demaison, Jean; Craig, Norman C; Gurusinghe, Ranil Malaka; Tubergen, Michael John; Rudolph, Heinz Dieter; Coudert, Laurent H; Szalay, Peter G; Császár, Attila G

    2017-04-03

    The ground state rotational spectrum of propene-3-d1, CH2=CHCH2D, was measured by Fourier transform microwave spectroscopy. Transitions were assigned for the two conformers, one with the D atom in the symmetry plane (S) and the other with the D atom out of plane (A). The energy difference between the two conformers was calculated to be 6.5 cm-1, the S conformer having lower energy. The quadrupole hyperfine structure due to deuterium was resolved and analyzed for the two conformers. The experimental quadrupole coupling and the centrifugal distortion constants compared favorably to their ab initio counterparts. Ground state rotational constants for the S conformer are 40582.157(9), 9067.024(1), and 7766.0165(12) MHz. Ground state rotational constants for the A conformer are 43403.75(3), 8658.961(2), and 7718.247(2) MHz. For the A conformer, a small tunneling splitting (19 MHz) due to internal rotation was observed and analyzed. Using the new rotational constants of this work as well as those previously determined for the 13C species and for some deuterium-substituted species from the literature, a new semiexperimental equilibrium structure was determined and its high accuracy was confirmed. The difficulty in obtaining accurate coordinates for the out-of-plane hydrogen atom is discussed.

  19. Use of passive scalar tagging for the study of coherent structures in the plane mixing layer

    NASA Technical Reports Server (NTRS)

    Ramaprian, B. R.; Sandham, N. D.; Mungal, M. G.; Reynolds, W. C.

    1988-01-01

    Data obtained from the numerical simulation of a 2-D mixing layer were used to study the feasibility of using the instantaneous concentration of a passive scalar for detecting the typical coherent structures in the flow. The study showed that this technique works quite satisfactorily and yields results similar to those that can be obtained by using the instantaneous vorticity for structure detection. Using the coherent events educed by the scalar conditioning technique, the contribution of the coherent events to the total turbulent momentum and scalar transport was estimated. It is found that the contribution from the typical coherent events is of the same order as that of the time-mean value. However, the individual contributions become very large during the pairing of these structures. The increase is particularly spectacular in the case of the Reynolds shear stress.

  20. Structure and properties of ITQ-8: a hydrous layer silicate with microporous silicate layers.

    PubMed

    Marler, Bernd; Müller, Melanie; Gies, Hermann

    2016-06-21

    ITQ-8 is a new hydrous layer silicate (HLS) with a chemical composition of [C4H8(C7H13N)2]8 [Si64O128(OH)16]·48H2O per unit cell. The synthesis of ITQ-8 was first described in 2002 by Díaz-Cabañas et al., the structure of this material, however, remained unsolved at that time. Physico-chemical characterization using solid-state NMR spectroscopy, SEM, TG-DTA, and FTIR spectroscopy confirmed that ITQ-8 is a layer silicate. The XRD powder pattern was indexed in the monoclinic system with lattice parameters of a0 = 35.5168(5) Å, b0 = 13.3989(2) Å, c0 = 16.0351(2) Å, β = 106.74(2)°. The crystal structure was solved by simulated annealing. Rietveld refinement of the structure in space group C2/c converged to residual values of RBragg = 0.023, RF = 0.022 and chi(2) = 2.3 confirming the structure model. The structure of ITQ-8 contains silicate layers with a topology that resembles a (11-1) section of the framework of zeolite levyne. So far, this layer topology is unique among layer silicates. The layer can be regarded as made up of 4-, 6-, double-six and 8-rings which are interconnected to form cup-like "half-cages". Unlike other HLSs, which possess impermeable silicate layers, ITQ-8 contains 8-rings pores with a free diameter of 3.5 Å × 3.4 Å and can be regarded as a "small-pore layer silicate". In the crystal structure, the organic cations, 1,4-diquiniclidiniumbutane, used as structure directing agents during synthesis are intercalated between the silicate layers. Clusters (bands) of water molecules which are hydrogen bonded to each other and to the terminal Si-OH/Si-O(-) groups are located between the organic cations and interconnect the silicate layers. ITQ-8 is a very interesting material as precursor for the synthesis of microporous framework silicates by topotactic condensation or interlayer expansion reactions leading to 3D micro-pore systems which may be useful in applications as e.g. catalysts, catalyst supports and adsorbents of for separation.

  1. Manipulation by exchange coupling in layered magnetic structures

    SciTech Connect

    Moskalenko, M. A.; Uzdin, V. M.; Zabel, H.

    2014-02-07

    Exchange coupling in magnetic heterostructures can be modified via introduction of additional magnetic spacer layers at the interfaces. The magnetic characteristics and the spacer layer thickness determine the functional properties of the whole system. We show that the hysteresis loop area of trilayer spring magnets with two different soft magnetic layers (s1, s2) and one hard magnetic layer (h) with the sequence s1/s2/h can be increased as compared to both bilayer structures s1/h and s2/h with the same total thickness of the soft layers and for definite thickness ratios of the soft layers and their sequences. For ferrimagnetic spin valves, the perpendicular exchange bias effect can be tuned via the thickness of non-magnetic spacer layers at the interface, which determine the exchange coupling between ferrimagnets. A simple quasi one-dimensional phenomenological model is able to describe the magnetic hysteresis of even complex layered structures and to predict optimal geometrical and magnetic parameters of such heterostructures.

  2. WN4 longitudinal structure in the O (5S - 3P) and O+ (2P - 2D) ionospheric emissions as simulated by the C-IAM

    NASA Astrophysics Data System (ADS)

    Martynenko, Oleg; Ward, William E.; Shepherd, Gordon; Cho, Young-Min; Namgaladze, Alexander; Fomichev, Victor; McConnell, John; Semeniuk, Kirill; Beagley, Stephen

    A newly developed Canadian Ionosphere and Atmosphere Model (C-IAM) is introduced. It is being developed on the basis of two existing first principle models: the extended Canadian Middle Atmosphere Model (CMAM) and the ionospheric part of the Upper Atmosphere Model (UAM). The model extends from the surface to the inner magnetosphere and hence, is able to describe in a self-consistent way how lower atmosphere dynamical variability propagates into and affects the upper atmosphere and ionosphere. The C-IAM was applied to model the spatial structure of two different ionospheric emissions: the nighttime 135.6 nm O ( (5) S - (3) P) and daytime 732 nm O (+) ( (2) P - (2) D) emissions. The IMAGE satellite observations showed a wave number 4 (WN4) longitudinal structure in the 135.6 nm ionospheric emission emanating from the equatorial ionization anomaly at 350-400 km near 20:00 local time at each longitude. C-IAM simulations are in a good agreement with the observations. Model result analysis reveals that the main mechanism for generating the WN4 structure in the 135.6 nm emission is a modification of the ionospheric dynamo field caused by longitudinal variation of the zonal wind due to waves penetrating from the lower atmosphere. It was also shown, that during geomagnetic storms and substorms the high-latitudinal electric field fully suppresses the dynamo, so that the emission intensity dramatically decreases and the WN4 structure does not appear. The 732 nm emission simulated with the C-IAM also reveals the WN4 structure. Similar to the 135.6 nm emission, this structure is caused by waves penetrating from the lower atmosphere. However, the mechanism of excitation is quite different. The 732 nm emission is produced by the instant local ionization and excitation, and, hence, its variation is caused by the neutral density variability in the F2 region (above 200 km) without any involvement of the electric field effects. Correspondingly, latitudinal distribution of this

  3. Syntheses, characterizations and crystal structures of two new lead(II) amino and carboxylate-sulfonates with a layered and a pillared layered structure

    NASA Astrophysics Data System (ADS)

    Yuan, Yan-Ping; Mao, Jiang-Gao; Song, Jun-Ling

    2004-03-01

    Reactions of lead(II) acetate with m-aminobenzenesulfonic acid (H L1) and 5-sulfoisophthalic acid (H 3L2) afforded two new lead(II) sulfonates, Pb( L1) 21 and Pb 2( L2)( μ3-OH)(H 2O) 2. In compound 1, the lead(II) ion is eight-coordinated by two sulfonate groups bidentately, two sulfonate groups unidentately and two amino groups from six ligands. Each L1 ligand is tetradentate and bridges with three Pb(II) ions. The interconnection of the Pb(II) ions via bridging sulfonate ligands resulted in <100> and <200> layers. In compound 2, one Pb(II) ion is six-coordinated by a carboxylate group bidentately, by two carboxylate groups unidentately, by a sulfonate oxygen atom and by an OH anion, whereas the other one is six-coordinated by a bidentate chelating carboxylate group, two μ3-OH anions, a sulfonate oxygen atom and an aqua ligand. The interconnection of irregular PbO 6 polyhedra via carboxylate-sulfonate ligands resulted in the formation of a pillared layered structure with the 2D layer being formed; the lead(II) ions, hydroxyl groups, carboxylate and sulfonate groups and the benzene ring as the pillar agent.

  4. Simultaneous measurement of aero-optical distortion and turbulent structure in a heated boundary layer

    NASA Astrophysics Data System (ADS)

    Saxton-Fox, Theresa; McKeon, Beverley; Smith, Adam; Gordeyev, Stanislav

    2014-11-01

    This study examines the relationship between turbulent structures and the aero-optical distortion of a laser beam passing through a turbulent boundary layer. Previous studies by Smith et al. (AIAA, 2014--2491) have found a bulk convection velocity of 0 . 8U∞ for aero-optical distortion in turbulent boundary layers, motivating a comparison of the distortion with the outer boundary layer. In this study, a turbulent boundary layer is developed over a flat plate with a moderately-heated section of length 25 δ . Density variation in the thermal boundary layer leads to aero-optical distortion, which is measured with a Malley probe (Smith et al., AIAA, 2013--3133). Simultaneously, 2D PIV measurements are recorded in a wall-normal, streamwise plane centered on the Malley probe location. Experiments are run at Reθ = 2100 and at a Mach number of 0.03, with the heated wall 10 to 20°C above the free stream temperature. Correlations and conditional averages are carried out between Malley probe distortion angles and flow features in the PIV vector fields. Aero-optical distortion in this study will be compared to distortion in higher Mach number flows studied by Gordeyev et al. (J. Fluid Mech., 2014), with the aim of extending conclusions into compressible flows. This research is made possible by the Department of Defense through the National Defense & Engineering Graduate Fellowship (NDSEG) Program and by the Air Force Office of Scientific Research Grant # FA9550-12-1-0060.

  5. Long structures in a turbulent boundary layer with a rod-roughened wall

    NASA Astrophysics Data System (ADS)

    Kim, Jung Hoon; Lee, Jae Hwa

    2015-11-01

    Direct numerical simulation (DNS) of a turbulent boundary layer (TBL) over a rod-roughened wall is performed with long streamwise domain to examine streamwise scale growth mechanism of streamwise velocity fluctuating structures. The surface roughness is the two-dimensional (2-D) rod arranged regularly in the streamwise direction. Inspection of the instantaneous flow fields and streamwise two-point spatial correlations of the streamwise velocity fluctuations shows that the streamwise and spanwise length scales of the structures over the rough wall are generally larger than those over the smooth wall, while the spanwise inclination angle to the streamwise direction (helix angle) is smaller over the rough wall. Inspection of time-evolving instantaneous fields clearly exhibits that adjacent long structures combine to form a longer structure by spanwise merging process over the rough wall, and the occurrence of the spanwise merging for the streamwise scale growth is expected to be more active over the rough wall due to turbulent scales generated by the 2-D roughness. This work was supported by Basic Science Research Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Education (NRF-2014R1A1A2057031) and 2015 Research Fund (1.150033.01) of UNIST.

  6. 2D semiconductor optoelectronics

    NASA Astrophysics Data System (ADS)

    Novoselov, Kostya

    The advent of graphene and related 2D materials has recently led to a new technology: heterostructures based on these atomically thin crystals. The paradigm proved itself extremely versatile and led to rapid demonstration of tunnelling diodes with negative differential resistance, tunnelling transistors, photovoltaic devices, etc. By taking the complexity and functionality of such van der Waals heterostructures to the next level we introduce quantum wells engineered with one atomic plane precision. Light emission from such quantum wells, quantum dots and polaritonic effects will be discussed.

  7. Towards functional assembly of 3D and 2D nanomaterials

    NASA Astrophysics Data System (ADS)

    Jacobs, Christopher B.; Wang, Kai; Ievlev, Anton V.; Muckley, Eric S.; Ivanov, Ilia N.

    2016-09-01

    Functional assemblies of materials can be realized by tuning the work function and band gap of nanomaterials by rational material selection and design. Here we demonstrate the structural assembly of 2D and 3D nanomaterials and show that layering a 2D material monolayer on a 3D metal oxide leads to substantial alteration of both the surface potential and optical properties of the 3D material. A 40 nm thick film of polycrystalline NiO was produced by room temperature rf-sputtering, resulting in a 3D nanoparticle assembly. Chemical vapor deposition (CVD) grown 10-30 μm WS2 flakes (2D material) were placed on the NiO surface using a PDMS stamp transfer technique. The 2D/3D WS2/NiO assembly was characterized using confocal micro Raman spectroscopy to evaluate the vibrational properties and using Kelvin probe force microscopy (KPFM) to evaluate the surface potential. Raman maps of the 2D/3D assembly show spatial non-uniformity of the A1g mode ( 418 cm-1) and the disorder-enhanced longitudinal acoustic mode, 2LA(M) ( 350 cm-1), suggesting that the WS2 exists in a strained condition on when transferred onto 3D polycrystalline NiO. KPFM measurements show that single layer WS2 on SiO2 has a surface potential 75 mV lower than that of SiO2, whereas the surface potential of WS2 on NiO is 15 mV higher than NiO, indicating that WS2 could act as electron donor or acceptor depending on the 3D material it is interfaced with. Thus 2D and 3D materials can be organized into functional assemblies with electron flow controlled by the WS2 either as the electron donor or acceptor.

  8. 2D Materials for Optical Modulation: Challenges and Opportunities.

    PubMed

    Yu, Shaoliang; Wu, Xiaoqin; Wang, Yipei; Guo, Xin; Tong, Limin

    2017-02-21

    Owing to their atomic layer thickness, strong light-material interaction, high nonlinearity, broadband optical response, fast relaxation, controllable optoelectronic properties, and high compatibility with other photonic structures, 2D materials, including graphene, transition metal dichalcogenides and black phosphorus, have been attracting increasing attention for photonic applications. By tuning the carrier density via electrical or optical means that modifies their physical properties (e.g., Fermi level or nonlinear absorption), optical response of the 2D materials can be instantly changed, making them versatile nanostructures for optical modulation. Here, up-to-date 2D material-based optical modulation in three categories is reviewed: free-space, fiber-based, and on-chip configurations. By analysing cons and pros of different modulation approaches from material and mechanism aspects, the challenges faced by using these materials for device applications are presented. In addition, thermal effects (e.g., laser induced damage) in 2D materials, which are critical to practical applications, are also discussed. Finally, the outlook for future opportunities of these 2D materials for optical modulation is given.

  9. Decoupling a Reflecting Layer From Its Support Structure

    NASA Technical Reports Server (NTRS)

    Bamford, R. M.

    1984-01-01

    Mounting decouples thermal distortions of reflective surface so not transmitted to support structure. Reflecting layer consists of aluminum reflecting tiles attached to support structure by flexural mounting bend and twist to accommodate thermal expansion of tiles. Technique useful in microwave-antenna reflectors.

  10. Syntheses, crystal structures, and characterization of three 1D, 2D and 3D complexes based on mixed multidentate N- and O-donor ligands

    SciTech Connect

    Yang, Huai-Xia; Liang, Zhen; Hao, Bao-Lian; Meng, Xiang-Ru

    2014-10-15

    Three new 1D to 3D complexes, namely, ([Ni(btec)(Himb){sub 2}(H{sub 2}O){sub 2}]·6H{sub 2}O){sub n} (1), ([Cd(btec){sub 0.5}(imb)(H{sub 2}O)]·1.5H{sub 2}O){sub n} (2), and ([Zn(btec){sub 0.5}(imb)]·H{sub 2}O){sub n} (3) (H{sub 4}btec=1,2,4,5-benzenetetracarboxylic acid, imb=2-(1H-imidazol-1-methyl)-1H-benzimidazole) have been synthesized by adjusting the central metal ions. Single-crystal X-ray diffraction analyses reveal that complex 1 possesses a 1D chain structure which is further extended into the 3D supramolecular architecture via hydrogen bonds. Complex 2 features a 2D network with Schla¨fli symbol (5{sup 3}·6{sup 2}·7)(5{sup 2}·6{sup 4}). Complex 3 presents a 3D framework with a point symbol of (4·6{sup 4}·8)(4{sup 2}·6{sup 2}·8{sup 2}). Moreover, their IR spectra, PXRD patterns, thermogravimetric curves, and luminescent emissions were studied at room temperature. - Graphical abstract: Three new 1D to 3D complexes with different structural and topological motifs have been obtained by modifying the central metal ions. Additionally, their IR, TG analyses and fluorescent properties are also investigated. - Highlights: • Three complexes based on mixed multidentate N- and O-donor ligands. • The complexes are characterized by IR, luminescence and TGA techniques. • Benzenetetracarboxylates display different coordination modes in complexes 1–3. • Changing the metal ions can result in complexes with completely different structures.

  11. Quantification of transition dipole strengths using 1D and 2D spectroscopy for the identification of molecular structures via exciton delocalization: Application to α-helices

    PubMed Central

    Grechko, Maksim; Zanni, Martin T.

    2012-01-01

    Vibrational and electronic transition dipole strengths are often good probes of molecular structures, especially in excitonically coupled systems of chromophores. One cannot determine transition dipole strengths using linear spectroscopy unless the concentration is known, which in many cases it is not. In this paper, we report a simple method for measuring transition dipole moments from linear absorption and 2D IR spectra that does not require knowledge of concentrations. Our method is tested on several model compounds and applied to the amide I′ band of a polypeptide in its random coil and α-helical conformation as modulated by the solution temperature. It is often difficult to confidently assign polypeptide and protein secondary structures to random coil or α-helix by linear spectroscopy alone, because they absorb in the same frequency range. We find that the transition dipole strength of the random coil state is 0.12 ± 0.013 D2, which is similar to a single peptide unit, indicating that the vibrational mode of random coil is localized on a single peptide unit. In an α-helix, the lower bound of transition dipole strength is 0.26 ± 0.03 D2. When taking into account the angle of the amide I′ transition dipole vector with respect to the helix axis, our measurements indicate that the amide I′ vibrational mode is delocalized across a minimum of 3.5 residues in an α-helix. Thus, one can confidently assign secondary structure based on exciton delocalization through its effect on the transition dipole strength. Our method will be especially useful for kinetically evolving systems, systems with overlapping molecular conformations, and other situations in which concentrations are difficult to determine. PMID:23163364

  12. The structure and stratigraphy of the sedimentary succession in the Swedish sector of the Baltic Basin: New insights from vintage 2D marine seismic data

    NASA Astrophysics Data System (ADS)

    Sopher, Daniel; Erlström, Mikael; Bell, Nicholas; Juhlin, Christopher

    2016-04-01

    We present five interpreted regional seismic profiles, describing the full sedimentary sequence across the Swedish sector of the Baltic Sea. The data for the study are part of an extensive and largely unpublished 2D seismic dataset acquired between 1970 and 1990 by the Swedish Oil Prospecting Company (OPAB). The Baltic Basin is an intracratonic basin located in northern Europe. Most of the Swedish sector of the basin constitutes the NW flank of a broad synclinal depression, the Baltic Basin. In the SW of the Swedish sector lies the Hanö Bay Basin, formed by subsidence associated with inversion of the Tornquist Zone during the Late Cretaceous. The geological history presented here is broadly consistent with previously published works. We observe an area between the Hanö Bay and the Baltic Basin where the Palaeozoic strata has been affected by transpression and subsequent inversion, associated with the Tornquist Zone during the late Carboniferous-Early Permian and Late Cretaceous, respectively. We propose that the Christiansø High was a structural low during the Late Jurassic, which was later inverted in the Late Cretaceous. We suggest that a fan shaped feature in the seismic data, adjacent to the Christiansø Fault within the Hanö Bay Basin, represents rapidly deposited, coarse-grained sediments eroded from the inverted Christiansø High during the Late Cretaceous. We identify a number of faults within the deeper part of the Baltic Basin, which we also interpret to be transpressional in nature, formed during the Caledonian Orogeny in the Late Silurian-Early Devonian. East of Gotland a number of sedimentary structures consisting of Silurian carbonate reefs and Ordovician carbonate mounds, as well as a large Quaternary glacial feature are observed. Finally, we use the seismic interpretation to infer the structural and stratigraphic history of the Baltic and Hanö Bay basins within the Swedish sector.

  13. Prediction of silicon-based layered structures for optoelectronic applications.

    PubMed

    Luo, Wei; Ma, Yanming; Gong, Xingao; Xiang, Hongjun

    2014-11-12

    A method based on the particle swarm optimization algorithm is presented to design quasi-two-dimensional materials. With this development, various single-layer and bilayer materials of C, Si, Ge, Sn, and Pb were predicted. A new Si bilayer structure is found to have a more favored energy than the previously widely accepted configuration. Both single-layer and bilayer Si materials have small band gaps, limiting their usages in optoelectronic applications. Hydrogenation has therefore been used to tune the electronic and optical properties of Si layers. We discover two hydrogenated materials of layered Si8H2 and Si6H2 possessing quasidirect band gaps of 0.75 and 1.59 eV, respectively. Their potential applications for light-emitting diode and photovoltaics are proposed and discussed. Our study opened up the possibility of hydrogenated Si layered materials as next-generation optoelectronic devices.

  14. Two novel lead(II) carboxyphosphonates with a layered and a 3D framework structure: syntheses, crystal structures, reversible dehydration/hydration, and luminescence properties.

    PubMed

    Chu, Wei; Sun, Zhen-Gang; Jiao, Cheng-Qi; Zhu, Yan-Yu; Sun, Shou-Hui; Tian, Hui; Zheng, Ming-Jing

    2013-06-14

    Two novel lead(II) carboxyphosphonates with a layered and a 3D framework structure, namely, [Pb2Cl3(H2L)]·H2O (1) and [Pb2(HL)(HBTC)] (2) (H3L = H2O3PCH2-NC5H9-COOH, H3BTC = 1,3,5-benzenetricarboxylic acid), have been synthesized under hydrothermal conditions and structurally characterized. For compound 1, the interconnection of Pb(1)O2Cl3, Pb(2)O2Cl3, and CPO3 polyhedra via corner- and edge-sharing forms a 1D chain. The adjacent chains connect with each other by sharing the chloride anion, thereby generating a 2D layered structure in the ab-plane. The lattice water molecules are located between adjacent layers. Compound 2 exhibits a 3D pillared-layered structure. The Pb(1)O5, Pb(2)O5, and CPO3 polyhedra are interconnected into a 1D double chain via corner- and edge-sharing, which is further linked to adjacent chains through carboxyphosphonate ligands to form a 2D double layer structure. Neighboring double layers are bridged through the second linkers HBTC(2-), leading to a 3D pillared-layered structure with a 1D channel system along the a-axis. An interesting feature of compound 1 is the presence of the dehydration/hydration properties. It is worth noting that compound 2 can be stable up to a high temperature. The luminescent properties of compounds 1 and 2 have also been studied.

  15. 2D Modelling of the Gorkha earthquake through the joint exploitation of Sentinel 1-A DInSAR measurements and geological, structural and seismological information

    NASA Astrophysics Data System (ADS)

    De Novellis, Vincenzo; Castaldo, Raffaele; Solaro, Giuseppe; De Luca, Claudio; Pepe, Susi; Bonano, Manuela; Casu, Francesco; Zinno, Ivana; Manunta, Michele; Lanari, Riccardo; Tizzani, Pietro

    2016-04-01

    A Mw 7.8 earthquake struck Nepal on 25 April 2015 at 06:11:26 UTC, killing more than 9,000 people, injuring more than 23,000 and producing extensive damages. The main seismic event, known as the Gorkha earthquake, had its epicenter localized at ~82 km NW of the Kathmandu city and the hypocenter at a depth of approximately 15 km. After the main shock event, about 100 aftershocks occurred during the following months, propagating toward the south-east direction; in particular, the most energetic shocks were the Mw 6.7 and Mw 7.3 occurred on 26 April and 12 May, respectively. In this study, we model the causative fault of the earthquake by jointly exploiting surface deformation retrieved by the DInSAR measurements collected through the Sentinel 1-A (S1A) space-borne sensor and the available geological, structural and seismological information. We first exploit the analytical solution performing a back-analysis of the ground deformation detected by the first co-seismic S1A interferogram, computed by exploiting the 17/04/2015 and 29/04/2015 SAR acquisitions and encompassing the main earthquake and some aftershocks, to search for the location and geometry of the fault plane. Starting from these findings and by benefiting from the available geological, structural and seismological data, we carry out a Finite Element (FE)-based 2D modelling of the causative fault, in order to evaluate the impact of the geological structures activated during the seismic event on the distribution of the ground deformation field. The obtained results show that the causative fault has a rather complex compressive structure, dipping northward, formed by segments with different dip angles: 6° the deep segment and 60° the shallower one. Therefore, although the hypocenters of the main shock and most of the more energetic aftershocks are located along the deeper plane, corresponding to a segment of the Main Himalayan Thrust (MHT), the FE solution also indicates the contribution of the shallower

  16. Graph Structure-Based Simultaneous Localization and Mapping Using a Hybrid Method of 2D Laser Scan and Monocular Camera Image in Environments with Laser Scan Ambiguity.

    PubMed

    Oh, Taekjun; Lee, Donghwa; Kim, Hyungjin; Myung, Hyun

    2015-07-03

    Localization is an essential issue for robot navigation, allowing the robot to perform tasks autonomously. However, in environments with laser scan ambiguity, such as long corridors, the conventional SLAM (simultaneous localization and mapping) algorithms exploiting a laser scanner may not estimate the robot pose robustly. To resolve this problem, we propose a novel localization approach based on a hybrid method incorporating a 2D laser scanner and a monocular camera in the framework of a graph structure-based SLAM. 3D coordinates of image feature points are acquired through the hybrid method, with the assumption that the wall is normal to the ground and vertically flat. However, this assumption can be relieved, because the subsequent feature matching process rejects the outliers on an inclined or non-flat wall. Through graph optimization with constraints generated by the hybrid method, the final robot pose is estimated. To verify the effectiveness of the proposed method, real experiments were conducted in an indoor environment with a long corridor. The experimental results were compared with those of the conventional GMappingapproach. The results demonstrate that it is possible to localize the robot in environments with laser scan ambiguity in real time, and the performance of the proposed method is superior to that of the conventional approach.

  17. 3D assembly based on 2D structure of Cellulose Nanofibril/Graphene Oxide Hybrid Aerogel for Adsorptive Removal of Antibiotics in Water

    PubMed Central

    Yao, Qiufang; Fan, Bitao; Xiong, Ye; Jin, Chunde; Sun, Qingfeng; Sheng, Chengmin

    2017-01-01

    Cellulose nanofibril/graphene oxide hybrid (CNF/GO) aerogel was fabricated via a one-step ultrasonication method for adsorptive removal of 21 kinds of antibiotics in water. The as-prepared CNF/GO aerogel possesses interconnected 3D network microstructure, in which GO nanosheets with 2D structure were intimately grown along CNF through hydrogen bonds. The aerogel exhibited superior adsorption capacity toward the antibiotics. The removal percentages (R%) of the antibiotics were more than 69% and the sequence of six categories antibiotics according to the adsorption efficiency was as follows: Tetracyclines > Quinolones > Sulfonamides > Chloramphenicols > β-Lactams > Macrolides. The adsorption mechanism was proposed to be electrostatic attraction, p-π interaction, π-π interaction and hydrogen bonds. In detail, the adsorption capacities of CNF/GO aerogel were 418.7 mg·g−1 for chloramphenicol, 291.8 mg·g−1 for macrolides, 128.3 mg·g−1 for quinolones, 230.7 mg·g−1 for β-Lactams, 227.3 mg·g−1 for sulfonamides, and 454.6 mg·g−1 for tetracyclines calculated by the Langmuir isotherm models. Furthermore, the regenerated aerogels still could be repeatedly used after ten cycles without obvious degradation of adsorption performance. PMID:28368045

  18. Synthesis and structural characterization of homochiral 2D coordination polymers of zinc and copper with conformationally flexible ditopic imidazolium-based dicarboxylate ligands.

    PubMed

    Nicasio, Antonio I; Montilla, Francisco; Álvarez, Eleuterio; Colodrero, Rosario P; Galindo, Agustín

    2017-01-03

    Different novel coordination polymers containing zinc, 1-4, and copper, 5-8, metals, connected via chiral imidazolium-based dicarboxylate ligands, [L(R)](-), were isolated by reaction between zinc acetate or copper acetate and enantiomerically pure HL(R) compounds. They were characterised and structurally identified by X-ray diffraction methods (single crystal and powder). These compounds are two-dimensional homochiral coordination polymers, [M(L(R))2]n, in which the metal ions are coordinated by the two carboxylate groups of [L(R)](-) anions in a general bridging monodentate μ(2)-κ(1)-O(1),κ(1)-O(3) fashion that afforded tetrahedral metal coordination environments for zinc, 1-4, and square planar for copper, 5-8, complexes. In all the compounds the 3D supramolecular architecture is constructed by non-covalent interactions between the hydrophobic parts (R groups) of the homochiral 2D coordination polymers and, in some cases, by weak C-HO non-classical hydrogen bonds that provided, in general, a dense crystal packing. DFT calculations on the [L(R)](-) anions confirmed their conformational flexibility as ditopic linkers and this fact makes possible the formation of different coordination polymers for four-coordinated metal centers. Preliminary studies on the Zn-catalyzed synthesis of chiral α-aminophosphonates were carried out and, unfortunately, no enantioselectivity was observed in these reactions.

  19. Graph Structure-Based Simultaneous Localization and Mapping Using a Hybrid Method of 2D Laser Scan and Monocular Camera Image in Environments with Laser Scan Ambiguity

    PubMed Central

    Oh, Taekjun; Lee, Donghwa; Kim, Hyungjin; Myung, Hyun

    2015-01-01

    Localization is an essential issue for robot navigation, allowing the robot to perform tasks autonomously. However, in environments with laser scan ambiguity, such as long corridors, the conventional SLAM (simultaneous localization and mapping) algorithms exploiting a laser scanner may not estimate the robot pose robustly. To resolve this problem, we propose a novel localization approach based on a hybrid method incorporating a 2D laser scanner and a monocular camera in the framework of a graph structure-based SLAM. 3D coordinates of image feature points are acquired through the hybrid method, with the assumption that the wall is normal to the ground and vertically flat. However, this assumption can be relieved, because the subsequent feature matching process rejects the outliers on an inclined or non-flat wall. Through graph optimization with constraints generated by the hybrid method, the final robot pose is estimated. To verify the effectiveness of the proposed method, real experiments were conducted in an indoor environment with a long corridor. The experimental results were compared with those of the conventional GMappingapproach. The results demonstrate that it is possible to localize the robot in environments with laser scan ambiguity in real time, and the performance of the proposed method is superior to that of the conventional approach. PMID:26151203

  20. 3D assembly based on 2D structure of Cellulose Nanofibril/Graphene Oxide Hybrid Aerogel for Adsorptive Removal of Antibiotics in Water.

    PubMed

    Yao, Qiufang; Fan, Bitao; Xiong, Ye; Jin, Chunde; Sun, Qingfeng; Sheng, Chengmin

    2017-04-03

    Cellulose nanofibril/graphene oxide hybrid (CNF/GO) aerogel was fabricated via a one-step ultrasonication method for adsorptive removal of 21 kinds of antibiotics in water. The as-prepared CNF/GO aerogel possesses interconnected 3D network microstructure, in which GO nanosheets with 2D structure were intimately grown along CNF through hydrogen bonds. The aerogel exhibited superior adsorption capacity toward the antibiotics. The removal percentages (R%) of the antibiotics were more than 69% and the sequence of six categories antibiotics according to the adsorption efficiency was as follows: Tetracyclines > Quinolones > Sulfonamides > Chloramphenicols > β-Lactams > Macrolides. The adsorption mechanism was proposed to be electrostatic attraction, p-π interaction, π-π interaction and hydrogen bonds. In detail, the adsorption capacities of CNF/GO aerogel were 418.7 mg·g(-1) for chloramphenicol, 291.8 mg·g(-1) for macrolides, 128.3 mg·g(-1) for quinolones, 230.7 mg·g(-1) for β-Lactams, 227.3 mg·g(-1) for sulfonamides, and 454.6 mg·g(-1) for tetracyclines calculated by the Langmuir isotherm models. Furthermore, the regenerated aerogels still could be repeatedly used after ten cycles without obvious degradation of adsorption performance.

  1. Transparent layered YAG ceramics with structured Yb doping produced via tape casting

    NASA Astrophysics Data System (ADS)

    Hostaša, Jan; Piancastelli, Andreana; Toci, Guido; Vannini, Matteo; Biasini, Valentina

    2017-03-01

    The flexibility of the ceramic production process, in particular in terms of shaping and spatial control of distribution of active ions, is one of the strong points in favor of transparent ceramics. In high power lasers in particular, where thermal management is a critical issue, the finely controlled design of spatial distribution of the doping ions within the laser gain media can reduce undesired thermally induced effects and large temperature gradients, and thus enhance the efficiency and laser beam quality especially under increased thermal load. In the present work transparent structured YAG ceramics with Yb doping were produced by tape casting followed by thermal compression of assembled tapes and sintered under high vacuum. The thermal compression of variously doped tape cast layers is a very promising method because it allows a high precision and good control over dopant distribution in the sintered material. After sintering, the distribution of Yb across the layers was characterized by SEM-EDX and the thickness of Yb diffusion zones between the layers with different Yb content was measured. Optical homogeneity was assessed by means of optical transmittance mapping of the samples and by 2D scanning of laser output. The effect of structured dopant distribution on laser performance was measured in quasi-CW and CW regime with different duty factors. Slope efficiency values higher than 50% were measured both in quasi-CW and in CW lasing conditions. The results are in good agreement with previously calculated predictions, confirming the beneficial effect of structured doping on laser performances and enlightening the impact of the residual scattering losses. Compared to other processing methods, such as the pressing of granulated powders, tape casting followed by thermal compression leads to straight and narrow interfaces between layers with different composition and allows to build structures composed of extremely thin layers with defined dopant content.

  2. A frequency-based approach to locate common structure for 2D-3D intensity-based registration of setup images in prostate radiotherapy

    SciTech Connect

    Munbodh, Reshma; Chen Zhe; Jaffray, David A.; Moseley, Douglas J.; Knisely, Jonathan P. S.; Duncan, James S.

    2007-07-15

    In many radiotherapy clinics, geometric uncertainties in the delivery of 3D conformal radiation therapy and intensity modulated radiation therapy of the prostate are reduced by aligning the patient's bony anatomy in the planning 3D CT to corresponding bony anatomy in 2D portal images acquired before every treatment fraction. In this paper, we seek to determine if there is a frequency band within the portal images and the digitally reconstructed radiographs (DRRs) of the planning CT in which bony anatomy predominates over non-bony anatomy such that portal images and DRRs can be suitably filtered to achieve high registration accuracy in an automated 2D-3D single portal intensity-based registration framework. Two similarity measures, mutual information and the Pearson correlation coefficient were tested on carefully collected gold-standard data consisting of a kilovoltage cone-beam CT (CBCT) and megavoltage portal images in the anterior-posterior (AP) view of an anthropomorphic phantom acquired under clinical conditions at known poses, and on patient data. It was found that filtering the portal images and DRRs during the registration considerably improved registration performance. Without filtering, the registration did not always converge while with filtering it always converged to an accurate solution. For the pose-determination experiments conducted on the anthropomorphic phantom with the correlation coefficient, the mean (and standard deviation) of the absolute errors in recovering each of the six transformation parameters were {theta}{sub x}:0.18(0.19) deg., {theta}{sub y}:0.04(0.04) deg., {theta}{sub z}:0.04(0.02) deg., t{sub x}:0.14(0.15) mm, t{sub y}:0.09(0.05) mm, and t{sub z}:0.49(0.40) mm. The mutual information-based registration with filtered images also resulted in similarly small errors. For the patient data, visual inspection of the superimposed registered images showed that they were correctly aligned in all instances. The results presented in this

  3. Turbulence structures in a strongly decelerated boundary layer

    NASA Astrophysics Data System (ADS)

    Gungor, Ayse G.; Maciel, Yvan; Simens, Mark P.

    2014-11-01

    The characteristics of three-dimensional intense Reynolds shear stress structures (Qs) are presented from a direct numerical simulation of an adverse pressure gradient boundary layer at Reθ = 1500 -2175. The intense Q2 (ejections) and Q4 (sweeps) structures separate into two groups: wall-attached and wall-detached structures. In the region where turbulent activity is maximal, between 0 . 2 δ and 0 . 6 δ , 94 % of the structures are detached structures. In comparison to canonical wall flows, the large velocity defect turbulent boundary layers are less efficient in extracting turbulent energy from the mean flow. There is, furthermore, much less turbulence activity and less velocity coherence near the wall. Additionally, the wall-detached structures are more frequent and carry a much larger amount of Reynolds shear stress. Funded in part by ITU, NSERC of Canada, and Multiflow program of the ERC.

  4. S-layers as patterning structures and supporting layers for biomimetic membranes

    NASA Astrophysics Data System (ADS)

    Pum, Dietmar; Wetzer, Barbara; Schuster, Bernhard; Sleytr, Uwe B.

    1997-03-01

    A new approach in nanostructure technology particularly in the functionalization of surfaces has been developed on the basis of crystalline bacterial cell surface layers (S- layers). S-layers are composed of monomolecular arrays of identical (glyco)proteins showing high molecular order, defined mass distribution and isoporosity, and a high binding capacity for functional macromolecules. The possibility for recrystallizing isolated S-layer subunits into large isoporous, coherent lattices at solid supports, at the air/water interface or on lipid films and for handling such layers by standard Langmuir-Blodgett techniques opens a broad spectrum of applications in basic and applied membrane research. S-layer supported functional phospholipid bilayers or tetraether lipid films mimic the molecular architecture of those archaebacterial cell envelopes that are exclusively composed of an S-layer and a plasma membrane. This novel concept could lead to new techniques for exploiting large scale structural and functional principles of membrane associated and integrated molecules (e.g. ion channels, proton pumps, receptors).

  5. Lamb waves dispersion curves for diamond based piezoelectric layered structure

    NASA Astrophysics Data System (ADS)

    Sorokin, B. P.; Kvashnin, G. M.; Telichko, A. V.; Novoselov, A. S.; Burkov, S. I.

    2016-03-01

    The presence of spurious peaks in the amplitude-frequency response of diamond based piezoelectric layered structure was shown. Excitation of such peaks results in deterioration of an useful acoustical signal. It was shown that such spurious peaks should be associated with Lamb waves in a layered structure. By means of FEM analysis, the propagation of acoustic waves of different types in the piezoelectric layered structure "Al/AlN/Mo/(100) diamond" has been investigated in detail. By analyzing the elastic displacement patterns at frequencies from 0 up to 250 MHz, a set of all the possible acoustic waves, especially Lamb modes, have been studied, and dispersive curves of phase velocity have been plotted. A revised classification of Lamb modes has been introduced.

  6. Controlling avalanche criticality in 2D nano arrays

    PubMed Central

    Zohar, Y. C.; Yochelis, S.; Dahmen, K. A.; Jung, G.; Paltiel, Y.

    2013-01-01

    Many physical systems respond to slowly changing external force through avalanches spanning broad range of sizes. Some systems crackle even without apparent external force, such as bursts of neuronal activity or charge transfer avalanches in 2D molecular layers. Advanced development of theoretical models describing disorder-induced critical phenomena calls for experiments probing the dynamics upon tuneable disorder. Here we show that isomeric structural transitions in 2D organic self-assembled monolayer (SAM) exhibit critical dynamics with experimentally tuneable disorder. The system consists of field effect transistor coupled through SAM to illuminated semiconducting nanocrystals (NCs). Charges photoinduced in NCs are transferred through SAM to the transistor surface and modulate its conductivity. Avalanches of isomeric structural transitions are revealed by measuring the current noise I(t) of the transistor. Accumulated surface traps charges reduce dipole moments of the molecules, decrease their coupling, and thus decrease the critical disorder of the SAM enabling its tuning during experiments. PMID:23677142

  7. Controlling avalanche criticality in 2D nano arrays.

    PubMed

    Zohar, Y C; Yochelis, S; Dahmen, K A; Jung, G; Paltiel, Y

    2013-01-01

    Many physical systems respond to slowly changing external force through avalanches spanning broad range of sizes. Some systems crackle even without apparent external force, such as bursts of neuronal activity or charge transfer avalanches in 2D molecular layers. Advanced development of theoretical models describing disorder-induced critical phenomena calls for experiments probing the dynamics upon tuneable disorder. Here we show that isomeric structural transitions in 2D organic self-assembled monolayer (SAM) exhibit critical dynamics with experimentally tuneable disorder. The system consists of field effect transistor coupled through SAM to illuminated semiconducting nanocrystals (NCs). Charges photoinduced in NCs are transferred through SAM to the transistor surface and modulate its conductivity. Avalanches of isomeric structural transitions are revealed by measuring the current noise I(t) of the transistor. Accumulated surface traps charges reduce dipole moments of the molecules, decrease their coupling, and thus decrease the critical disorder of the SAM enabling its tuning during experiments.

  8. Coherent X-ray radiation by relativistic electron in a structure “amorphous layer-vacuum-periodic layered medium”

    NASA Astrophysics Data System (ADS)

    Blazhevich, S. V.; Gladkikh, J. P.; Nemtsev, S. N.; Zagorodnyuk, R. A.; Noskov, A. V.

    2016-07-01

    The dynamic theory of coherent X-ray radiation by relativistic electron crossing a three-layer structure consisting of an amorphous substance layer, a layer of vacuum and a layer with artificial periodic structure has been developed. The process of radiation and propagation of X-ray waves in an artificial periodic structure have been considered based on two-wave approximation of dynamic diffraction theory in Laue scattering geometry.

  9. 3D printing of layered brain-like structures using peptide modified gellan gum substrates.

    PubMed

    Lozano, Rodrigo; Stevens, Leo; Thompson, Brianna C; Gilmore, Kerry J; Gorkin, Robert; Stewart, Elise M; in het Panhuis, Marc; Romero-Ortega, Mario; Wallace, Gordon G

    2015-10-01

    The brain is an enormously complex organ structured into various regions of layered tissue. Researchers have attempted to study the brain by modeling the architecture using two dimensional (2D) in vitro cell culturing methods. While those platforms attempt to mimic the in vivo environment, they do not truly resemble the three dimensional (3D) microstructure of neuronal tissues. Development of an accurate in vitro model of the brain remains a significant obstacle to our understanding of the functioning of the brain at the tissue or organ level. To address these obstacles, we demonstrate a new method to bioprint 3D brain-like structures consisting of discrete layers of primary neural cells encapsulated in hydrogels. Brain-like structures were constructed using a bio-ink consisting of a novel peptide-modified biopolymer, gellan gum-RGD (RGD-GG), combined with primary cortical neurons. The ink was optimized for a modified reactive printing process and developed for use in traditional cell culturing facilities without the need for extensive bioprinting equipment. Furthermore the peptide modification of the gellan gum hydrogel was found to have a profound positive effect on primary cell proliferation and network formation. The neural cell viability combined with the support of neural network formation demonstrated the cell supportive nature of the matrix. The facile ability to form discrete cell-containing layers validates the application of this novel printing technique to form complex, layered and viable 3D cell structures. These brain-like structures offer the opportunity to reproduce more accurate 3D in vitro microstructures with applications ranging from cell behavior studies to improving our understanding of brain injuries and neurodegenerative diseases.

  10. Shock-like structures in the tropical cyclone boundary layer

    NASA Astrophysics Data System (ADS)

    Williams, Gabriel J.; Taft, Richard K.; McNoldy, Brian D.; Schubert, Wayne H.

    2013-06-01

    This paper presents high horizontal resolution solutions of an axisymmetric, constant depth, slab boundary layer model designed to simulate the radial inflow and boundary layer pumping of a hurricane. Shock-like structures of increasing intensity appear for category 1-5 hurricanes. For example, in the category 3 case, the u>(∂u/∂r>) term in the radial equation of motion produces a shock-like structure in the radial wind, i.e., near the radius of maximum tangential wind the boundary layer radial inflow decreases from approximately 22 m s-1 to zero over a radial distance of a few kilometers. Associated with this large convergence is a spike in the radial distribution of boundary layer pumping, with updrafts larger than 22 m s-1 at a height of 1000 m. Based on these model results, it is argued that observed hurricane updrafts of this magnitude so close to the ocean surface are attributable to the dry dynamics of the frictional boundary layer rather than moist convective dynamics. The shock-like structure in the boundary layer radial wind also has important consequences for the evolution of the tangential wind and the vertical component of vorticity. On the inner side of the shock the tangential wind tendency is essentially zero, while on the outer side of the shock the tangential wind tendency is large due to the large radial inflow there. The result is the development of a U-shaped tangential wind profile and the development of a thin region of large vorticity. In many respects, the model solutions resemble the remarkable structures observed in the boundary layer of Hurricane Hugo (1989).

  11. The ferrite/superconductor layered structure for tunable microwave devices

    NASA Astrophysics Data System (ADS)

    Bobyl, A.; Suris, R.; Karmanenko, S.; Semenov, A.; Melkov, A.; Konuhov, S.; Olshevski, A.

    2002-08-01

    The ferrite/superconductor (FS) structure composed from the separate ferrite garnet Y 3Fe 5O 12 epitaxial layers and superconducting films was used for development of such microwave devices as tunable pass-band filter, phase-shifter and delay line. Application of superconducting layer decreases the microwave losses and it provides new functions of magnetostatic waveguide FS structures. The central frequency of band-pass filter is tuned from 1.5 up to 3 GHz; bandwidth can be regulated by the geometry of antenna transducers (from 30 up to 300 MHz); band insertion loss is about 1.5-3 dB.

  12. 2D photonic crystal and its angular reflective azimuthal spectrum

    NASA Astrophysics Data System (ADS)

    Senderakova, Dagmar; Drzik, Milan; Tomekova, Juliana

    2016-12-01

    Contemporary, attention is paid to photonic crystals, which can strongly modify light propagation through them and enable a controllable light manipulation. The contribution is focused on a sub-wavelength 2D structure formed by Al2O3 layer on silicon substrate, patterned with periodic hexagonal lattice of deep air holes. Using various laser sources of light at single wavelength, azimuthal angle dependence of the mirror-like reflected light intensity was recorded photo-electrically. The results obtained can be used to sample the band-structure of leaky modes of the photonic crystal more reliably and help us to map the photonic dispersion diagram.

  13. How the Structures and Properties of Two-Dimensional Layered Perovskites MAPbI3 and CsPbI3 Vary with the Number of Layers.

    PubMed

    Zhang, Lei; Liang, WanZhen

    2017-03-21

    This work aims to explore the intrinsic properties of two-dimensional (2D)-layered perovskites, (PEA)2PbI4(N) and Cs2PbI4(N), and demonstrating how their structures and properties vary with N. The results reveal that both (PEA)2PbI4(N) and Cs2PbI4(N) are direct bandgap semiconductors, their band/optical gaps and exciton-binding energies vary linearly with 1/N at N ≥ 3, and the effective masses slowly vary with N. Compared to the bulk phases, the structures of ultrathin (PEA)2PbI4(N) are more flexible and deformable than Cs2PbI4(N). The giant spin-coupling effect greatly decreases the band gaps of both 2D materials; however, it only induces the spin splitting in the bands of (PEA)2PbI4(N). This work suggests that the ultrathin 2D materials can be a potential candidate for nano-optoelectronic devices, and that the nanoplates with N ≥ 3 could have similar performances with bulk materials in the carrier migration and exciton separation so that they can be effectively applied in photovoltaic cells.

  14. Velocity-vorticity correlation structures in compressible turbulent boundary layer

    NASA Astrophysics Data System (ADS)

    Chen, Jun; Li, Shi-Yao; She, Zhen-Su

    2016-11-01

    A velocity-vorticity correlation structure (VVCS) analysis is applied to analyze data of 3-dimensional (3-D) direct numerical simulations (DNS), to investigate the quantitative properties of the most correlated vortex structures in compressible turbulent boundary layer (CTBL) at Mach numbers, Ma = 2 . 25 and 6 . 0 . It is found that the geometry variation of the VVCS closely reflects the streamwise development of CTBL. In laminar region, the VVCS captures the instability wave number of the boundary layer. The transition region displays a distinct scaling change of the dimensions of VVCS. The developed turbulence region is characterized by a constant spatial extension of the VVCS. For various Mach numbers, the maximum correlation coefficient of the VVCS presents a clear multi-layer structure with the same scaling laws as a recent symmetry analysis proposed to quantifying the sublayer, the log-layer, and the wake flow. A surprising discovery is that the wall friction coefficient, Cf, holds a "-1"-power law of the wall normal distance of the VVCS, ys. This validates the speculation that the wall friction is determined by the near-wall coherent structure, which clarifies the correlation between statistical structures and the near-wall dynamics. Project 11452002 and 11172006 supported by National Natural Science Foundation of China.

  15. HOTCFGM-2D: A Coupled Higher-Order Theory for Cylindrical Structural Components with Bi-Directionally Components with Bi-Directionally Graded Microstructures

    NASA Technical Reports Server (NTRS)

    Pindera, Marek-Jerzy; Aboudi, Jacob

    2000-01-01

    The objective of this two-year project was to develop and deliver to the NASA-Glenn Research Center a two-dimensional higher-order theory, and related computer codes, for the analysis and design of cylindrical functionally graded materials/structural components for use in advanced aircraft engines (e.g., combustor linings, rotor disks, heat shields, brisk blades). To satisfy this objective, two-dimensional version of the higher-order theory, HOTCFGM-2D, and four computer codes based on this theory, for the analysis and design of structural components functionally graded in the radial and circumferential directions were developed in the cylindrical coordinate system r-Theta-z. This version of the higher-order theory is a significant generalization of the one-dimensional theory, HOTCFGM-1D, developed during the FY97 for the analysis and design of cylindrical structural components with radially graded microstructures. The generalized theory is applicable to thin multi-phased composite shells/cylinders subjected to steady-state thermomechanical, transient thermal and inertial loading applied uniformly along the axial direction such that the overall deformation is characterized by a constant average axial strain. The reinforcement phases are uniformly distributed in the axial direction, and arbitrarily distributed in the radial and circumferential direction, thereby allowing functional grading of the internal reinforcement in the r-Theta plane. The four computer codes fgmc3dq.cylindrical.f, fgmp3dq.cylindrical.f, fgmgvips3dq.cylindrical.f, and fgmc3dq.cylindrical.transient.f are research-oriented codes for investigating the effect of functionally graded architectures, as well as the properties of the multi-phase reinforcement, in thin shells subjected to thermomechanical and inertial loading, on the internal temperature, stress and (inelastic) strain fields. The reinforcement distribution in the radial and circumferential directions is specified by the user. The thermal

  16. Layer-stacking effect on electronic structures of bilayer arsenene

    NASA Astrophysics Data System (ADS)

    Mi, Kui; Xie, Jiafeng; Si, M. S.; Gao, C. X.

    2017-01-01

    A monolayer of orthorhombic arsenic (arsenene) is a promising candidate for nano-electronic devices due to the uniquely electronic properties. To further extend its practical applications, an additional layer is introduced to tune the electronic structures. Four layer-stacking manners, namely AA-, AB-, AB‧-, and AC-stacking, are constructed and studied through using first-principles calculations. Compared with monolayer, an indirect-direct gap transition is realized in AB-stacking. More importantly, a semimetal feature appears in the AC- and AB‧-stacked bilayers, leaving the electronic structure of AA-stacking trivial. In addition, the energy dispersion around Γ is largely tuned from the layer-stacking effect. To understand the underlying physics, the \\textbf{k}\\cdot\\textbf{p} approximation is taken to address this issue. Our results show that the level repulsion from the additional layer domaintes the anisotropy of energy dispersion around Γ. The works like ours would shed new light on the tunability of the electronic structure in layered arsenene.

  17. Fine-scale thermohaline ocean structure retrieved with 2-D prestack full-waveform inversion of multichannel seismic data: Application to the Gulf of Cadiz (SW Iberia)

    NASA Astrophysics Data System (ADS)

    Dagnino, D.; Sallarès, V.; Biescas, B.; Ranero, C. R.

    2016-08-01

    This work demonstrates the feasibility of 2-D time-domain, adjoint-state acoustic full-waveform inversion (FWI) to retrieve high-resolution models of ocean physical parameters such as sound speed, temperature and salinity. The proposed method is first described and then applied to prestack multichannel seismic (MCS) data acquired in the Gulf of Cadiz (SW Iberia) in 2007 in the framework of the Geophysical Oceanography project. The inversion strategy flow includes specifically designed data preconditioning for acoustic noise reduction, followed by the inversion of sound speed in the shotgather domain. We show that the final sound speed model has a horizontal resolution of ˜ 70 m, which is two orders of magnitude better than that of the initial model constructed with coincident eXpendable Bathy Thermograph (XBT) data, and close to the theoretical resolution of O(λ). Temperature (T) and salinity (S) are retrieved with the same lateral resolution as sound speed by combining the inverted sound speed model with the thermodynamic equation of seawater and a local, depth-dependent T-S relation derived from regional conductivity-temperature-depth (CTD) measurements of the National Oceanic and Atmospheric Administration (NOAA) database. The comparison of the inverted T and S models with XBT and CTD casts deployed simultaneously to the MCS acquisition shows that the thermohaline contrasts are resolved with an accuracy of 0.18oC for temperature and 0.08 PSU for salinity. The combination of oceanographic and MCS data into a common, pseudo-automatic inversion scheme allows to quantitatively resolve submeso-scale features that ought to be incorporated into larger-scale ocean models of oceans structure and circulation.

  18. Design of elliptic cylindrical thermal cloak with layered structure

    NASA Astrophysics Data System (ADS)

    Yuan, Xuebo; Lin, Guochang; Wang, Youshan

    2017-01-01

    Thermal cloak has potential applications in thermal protection and sensing. Based on the theories of spatial transformation and effective medium, layered structure of elliptic cylindrical thermal cloak was designed. According to theoretical analysis and numerical simulation, the layered structure has typical characteristics of perfect thermal cloak. The external temperature field remains unchanged, while the internal temperature gradient decreases obviously. Meanwhile, the cloaking effect is stable in any direction. The cloaking effect can be improved by increasing the number of discretization layers or reducing the cloak thickness. The elliptic cylindrical cloak can be considered as cylindrical cloak when the focal distance is close to zero. This study has provided an effective way for realizing thermal cloak with more complex shapes.

  19. Ternary metal-rich sulfide with a layered structure

    DOEpatents

    Franzen, Hugo F.; Yao, Xiaoqiang

    1993-08-17

    A ternary Nb-Ta-S compound is provided having the atomic formula, Nb.sub.1.72 Ta.sub.3.28 S.sub.2, and exhibiting a layered structure in the sequence S-M3-M2-M1-M2-M3-S wherein S represents sulfur layers and M1, M2, and M3 represent Nb/Ta mixed metal layers. This sequence generates seven sheets stacked along the [001] direction of an approximate body centered cubic crystal structure with relatively weak sulfur-to-sulfur van der Waals type interactions between adjacent sulfur sheets and metal-to-metal bonding within and between adjacent mixed metal sheets.

  20. Structural complexities in the active layers of organic electronics.

    PubMed

    Lee, Stephanie S; Loo, Yueh-Lin

    2010-01-01

    The field of organic electronics has progressed rapidly in recent years. However, understanding the direct structure-function relationships between the morphology in electrically active layers and the performance of devices composed of these materials has proven difficult. The morphology of active layers in organic electronics is inherently complex, with heterogeneities existing across multiple length scales, from subnanometer to micron and millimeter range. A major challenge still facing the organic electronics community is understanding how the morphology across all of the length scales in active layers collectively determines the device performance of organic electronics. In this review we highlight experiments that have contributed to the elucidation of structure-function relationships in organic electronics and also point to areas in which knowledge of such relationships is still lacking. Such knowledge will lead to the ability to select active materials on the basis of their inherent properties for the fabrication of devices with prespecified characteristics.

  1. Stable single-layer structure of group-V elements

    NASA Astrophysics Data System (ADS)

    Ersan, F.; Aktürk, E.; Ciraci, S.

    2016-12-01

    In addition to stable single-layer buckled honeycomb and washboard structures of group-V elements (or pnictogens P, As, Sb, and Bi) we show that these elements can also form two-dimensional, single-layer structures consisting of buckled square and octagon rings. An extensive analysis comprising the calculation of mechanical properties, vibration frequencies, and finite-temperature ab initio molecular dynamics confirms that these structures are dynamically and thermally stable and suitable for applications at room temperature and above. All these structures are semiconductors with a fundamental band gap, which is wide for P but decreases with increasing row number. The effect of the spin-orbit coupling decreases the band gap and is found to be crucial for Sb and Bi. These results are obtained from first-principles calculations based on density functional theory.

  2. Hyperbolic Spirals as Surface Structures in Thin Layers.

    PubMed

    Weh, Lothar

    2001-03-15

    When thin layers of 4-chloro-3-methylphenol and a copolymer of methyl(methacrylate) and maleic acid dissolved in acetone are dried by solvent evaporation, various surface structures appear. Besides linear surface deformations that can ramify like fractals, spirals of the hyperbolic type have been found. The surface structures are due to crystallization processes and flows caused by surface tension differences. The spirals are surface elevations with grooves on both sides as shown by surface profile measurements by means of a microscope interferometer. The addition of surfactants reduces the structure formation. A large surfactant concentration prevents the structure formation. Copyright 2001 Academic Press.

  3. Coherent structures in compressible free-shear-layer flows

    SciTech Connect

    Aeschliman, D.P.; Baty, R.S.; Kennedy, C.A.; Chen, J.H.

    1997-08-01

    Large scale coherent structures are intrinsic fluid mechanical characteristics of all free-shear flows, from incompressible to compressible, and laminar to fully turbulent. These quasi-periodic fluid structures, eddies of size comparable to the thickness of the shear layer, dominate the mixing process at the free-shear interface. As a result, large scale coherent structures greatly influence the operation and efficiency of many important commercial and defense technologies. Large scale coherent structures have been studied here in a research program that combines a synergistic blend of experiment, direct numerical simulation, and analysis. This report summarizes the work completed for this Sandia Laboratory-Directed Research and Development (LDRD) project.

  4. Using Layer-Cake Geology to Illustrate Structural Topographic Relationships.

    ERIC Educational Resources Information Center

    Wagner, John Robert

    1987-01-01

    Discusses some of the difficulties of visualizing underlying geologic structural patterns by using maps or wooden blocks. Suggests the use of a modified layer cake to show dipping beds, folds, faults and differential erosion, as well as the relationships of stream valleys to outcrop patterns. (TW)

  5. Interfacial Atomic Structure of Twisted Few-Layer Graphene.

    PubMed

    Ishikawa, Ryo; Lugg, Nathan R; Inoue, Kazutoshi; Sawada, Hidetaka; Taniguchi, Takashi; Shibata, Naoya; Ikuhara, Yuichi

    2016-02-18

    A twist in bi- or few-layer graphene breaks the local symmetry, introducing a number of intriguing physical properties such as opening new bandgaps. Therefore, determining the twisted atomic structure is critical to understanding and controlling the functional properties of graphene. Combining low-angle annular dark-field electron microscopy with image simulations, we directly determine the atomic structure of twisted few-layer graphene in terms of a moiré superstructure which is parameterized by a single twist angle and lattice constant. This method is shown to be a powerful tool for accurately determining the atomic structure of two-dimensional materials such as graphene, even in the presence of experimental errors. Using coincidence-site-lattice and displacement-shift-complete theories, we show that the in-plane translation state between layers is not a significant structure parameter, explaining why the present method is adequate not only for bilayer graphene but also a few-layered twisted graphene.

  6. Exploring New RF Circuit Structures with Embedded Patterned Substrate Layers

    DTIC Science & Technology

    2013-06-12

    spaced microstrip lines are common in T/R module packages and other high density circuit packages. The work involved creating a method to reduce the...Jan-2013 Approved for Public Release; Distribution Unlimited Final Report: Exploring New RF Circuit Structures with Embedded Patterned Substrate...Report: Exploring New RF Circuit Structures with Embedded Patterned Substrate Layers Report Title This report presents the findings made under the ARO

  7. Solid chemistry of the Zn{sup II}/1,2,4-triazolate/anion system: Separation of 2D isoreticular layers tuned by the terminal counteranions X (X=Cl{sup -}, Br{sup -}, I{sup -}, SCN{sup -})

    SciTech Connect

    Chen Sanping; Sun Shu; Gao Shengli

    2008-12-15

    An array of 2D isoreticular layers, viz. [Zn(atrz)X]{sub {infinity}} (1.X; X=Cl{sup -}, Br{sup -}, I{sup -}; atrz=3-amino-1,2,4-triazole anion), [Zn{sub 4}(atrz){sub 4}(SCN){sub 4}.H{sub 2}O]{sub {infinity}} (1.SCN.H{sub 2}O) and [Zn(trz)X]{sub {infinity}} (2.X; X=Cl{sup -}, Br{sup -}, I{sup -}; trz=1,2,4-triazole anion), have been hydrothermally synthesized and structurally characterized. Compounds 1.X and 1.SCN.H{sub 2}O are constructed from binuclear planar Zn{sub 2}(atrz){sub 2} subunits and exhibit (4,4) topological network when the subunits are simplified as four-connected nodes. Based on changing the terminal counteranions X (X=Cl{sup -}, Br{sup -}, I{sup -}, SCN{sup -}), the average interlayer separations of 1.X and 1.SCN.H{sub 2}O are enlarged, which equal to 5.851, 6.153, 6.651 and 8.292 A, respectively. As a result, H{sub 2}O molecules reside in the spaces between two adjacent layers of 1.SCN.H{sub 2}O. 2 and 1 are the isomorphous structures. In common with 1, the interlayer separations of 2.X are widened with increasing the ion radius. Solid-state luminescence properties and thermogravimetric analyses of 1 and 2 were investigated, respectively. - Graphical Abstract: Based on employing the various terminal counteranions X (X=Cl{sup -}, Br{sup -}, I{sup -}, SCN{sup -}) the average interlayer separations of four 2D isoreticular layer compounds [Zn(atrz)X]{sub {infinity}} are gradually enlarged, which equal to 5.851, 6.153, 6.651 and 8.292 A, respectively. As a result, guest H{sub 2}O molecules reside in the space between two adjacent layers of [Zn{sub 4}(atrz){sub 4}(SCN){sub 4}.H{sub 2}O]{sub {infinity}}.

  8. High-throughput critical dimensions uniformity (CDU) measurement of two-dimensional (2D) structures using scanning electron microscope (SEM) systems

    NASA Astrophysics Data System (ADS)

    Fullam, Jennifer; Boye, Carol; Standaert, Theodorus; Gaudiello, John; Tomlinson, Derek; Xiao, Hong; Fang, Wei; Zhang, Xu; Wang, Fei; Ma, Long; Zhao, Yan; Jau, Jack

    2011-03-01

    In this paper, we tested a novel methodology of measuring critical dimension (CD) uniformity, or CDU, with electron beam (e-beam) hotspot inspection and measurement systems developed by Hermes Microvision, Inc. (HMI). The systems were used to take images of two-dimensional (2D) array patterns and measure CDU values in a custom designated fashion. Because this methodology combined imaging of scanning micro scope (SEM) and CD value averaging over a large array pattern of optical CD, or OCD, it can measure CDU of 2D arrays with high accuracy, high repeatability and high throughput.

  9. Multi-Layer Laminated Thin Films for Inflatable Structures

    NASA Technical Reports Server (NTRS)

    Yavrouian, Andre; Plett, Gary; Mannella, Jerami

    2005-01-01

    Special-purpose balloons and other inflatable structures would be constructed as flexible laminates of multiple thin polymeric films interspersed with layers of adhesive, according to a proposal. In the original intended application, the laminate would serve as the envelope of the Titan Aerobot a proposed robotic airship for exploring Titan (one of the moons of Saturn). Potential terrestrial applications for such flexible laminates could include blimps and sails. In the original application, the multi-layered laminate would contain six layers of 0.14-mil (0.0036-mm)-thick Mylar (or equivalent) polyethylene terephthalate film with a layer of adhesive between each layer of Mylar . The overall thickness and areal density of this laminate would be nearly the same as those of 1-mil (0.0254-mm)-thick monolayer polyethylene terephthalate sheet. However, the laminate would offer several advantages over the monolayer sheet, especially with respect to interrelated considerations of flexing properties, formation of pinholes, and difficulty or ease of handling, as discussed next. Most of the damage during flexing of the laminate would be localized in the outermost layers, where the radii of bending in a given bend would be the largest and, hence, the bending stress would be the greatest. The adverse effects of formation of pinholes would be nearly completely mitigated in the laminate because a pinhole in a given layer would not propagate to adjacent layers. Hence, the laminate would tend to remain effective as a barrier to retain gas. Similar arguments can be made regarding cracks: While a crack could form as a result of stress or a defect in the film material, a crack would not propagate into adjacent layers, and the adjacent layer(s) would even arrest propagation of the crack. In the case of the monolayer sheet, surface damage (scratches, dents, permanent folds, pinholes, and the like) caused by handling would constitute or give rise to defects that could propagate through

  10. Diverse and tunable electronic structures of single-layer metal phosphorus trichalcogenides for photocatalytic water splitting

    SciTech Connect

    Liu, Jian; Li, Xi-Bo; Wang, Da; Liu, Li-Min E-mail: limin.liu@csrc.ac.cn; Lau, Woon-Ming; Peng, Ping E-mail: limin.liu@csrc.ac.cn

    2014-02-07

    The family of bulk metal phosphorus trichalcogenides (APX{sub 3}, A = M{sup II}, M{sub 0.5}{sup I}M{sub 0.5}{sup III}; X = S, Se; M{sup I}, M{sup II}, and M{sup III} represent Group-I, Group-II, and Group-III metals, respectively) has attracted great attentions because such materials not only own magnetic and ferroelectric properties, but also exhibit excellent properties in hydrogen storage and lithium battery because of the layered structures. Many layered materials have been exfoliated into two-dimensional (2D) materials, and they show distinct electronic properties compared with their bulks. Here we present a systematical study of single-layer metal phosphorus trichalcogenides by density functional theory calculations. The results show that the single layer metal phosphorus trichalcogenides have very low formation energies, which indicates that the exfoliation of single layer APX{sub 3} should not be difficult. The family of single layer metal phosphorus trichalcogenides exhibits a large range of band gaps from 1.77 to 3.94 eV, and the electronic structures are greatly affected by the metal or the chalcogenide atoms. The calculated band edges of metal phosphorus trichalcogenides further reveal that single-layer ZnPSe{sub 3}, CdPSe{sub 3}, Ag{sub 0.5}Sc{sub 0.5}PSe{sub 3}, and Ag{sub 0.5}In{sub 0.5}PX{sub 3} (X = S and Se) have both suitable band gaps for visible-light driving and sufficient over-potentials for water splitting. More fascinatingly, single-layer Ag{sub 0.5}Sc{sub 0.5}PSe{sub 3} is a direct band gap semiconductor, and the calculated optical absorption further convinces that such materials own outstanding properties for light absorption. Such results demonstrate that the single layer metal phosphorus trichalcogenides own high stability, versatile electronic properties, and high optical absorption, thus such materials have great chances to be high efficient photocatalysts for water-splitting.

  11. Hybrid transfer-matrix FDTD method for layered periodic structures.

    PubMed

    Deinega, Alexei; Belousov, Sergei; Valuev, Ilya

    2009-03-15

    A hybrid transfer-matrix finite-difference time-domain (FDTD) method is proposed for modeling the optical properties of finite-width planar periodic structures. This method can also be applied for calculation of the photonic bands in infinite photonic crystals. We describe the procedure of evaluating the transfer-matrix elements by a special numerical FDTD simulation. The accuracy of the new method is tested by comparing computed transmission spectra of a 32-layered photonic crystal composed of spherical or ellipsoidal scatterers with the results of direct FDTD and layer-multiple-scattering calculations.

  12. Stable single-layer honeycomblike structure of silica.

    PubMed

    Özçelik, V Ongun; Cahangirov, S; Ciraci, S

    2014-06-20

    Silica or SiO(2), the main constituent of Earth's rocks has several 3D complex crystalline and amorphous phases, but it does not have a graphitelike layered structure in 3D. Our theoretical analysis and numerical calculations from the first principles predict a single-layer honeycomblike allotrope, hα silica, which can be viewed to be derived from the oxidation of silicene and it has intriguing atomic structure with reentrant bond angles in hexagons. It is a wide band gap semiconductor, which attains remarkable electromechanical properties showing geometrical changes under an external electric field. In particular, it is an auxetic metamaterial with a negative Poisson's ratio and has a high piezoelectric coefficient. While it can form stable bilayer and multilayer structures, its nanoribbons can show metallic or semiconducting behavior depending on their chirality. Coverage of dangling Si orbitals by foreign adatoms can attribute new functionalities to hα silica. In particular, Si(2)O(5), where Si atoms are saturated by oxygen atoms from top and bottom sides alternatingly can undergo a structural transformation to make silicatene, another stable, single layer structure of silica.

  13. Stable Single-Layer Honeycomblike Structure of Silica

    NASA Astrophysics Data System (ADS)

    Özçelik, V. Ongun; Cahangirov, S.; Ciraci, S.

    2014-06-01

    Silica or SiO2, the main constituent of Earth's rocks has several 3D complex crystalline and amorphous phases, but it does not have a graphitelike layered structure in 3D. Our theoretical analysis and numerical calculations from the first principles predict a single-layer honeycomblike allotrope, hα silica, which can be viewed to be derived from the oxidation of silicene and it has intriguing atomic structure with reentrant bond angles in hexagons. It is a wide band gap semiconductor, which attains remarkable electromechanical properties showing geometrical changes under an external electric field. In particular, it is an auxetic metamaterial with a negative Poisson's ratio and has a high piezoelectric coefficient. While it can form stable bilayer and multilayer structures, its nanoribbons can show metallic or semiconducting behavior depending on their chirality. Coverage of dangling Si orbitals by foreign adatoms can attribute new functionalities to hα silica. In particular, Si2O5, where Si atoms are saturated by oxygen atoms from top and bottom sides alternatingly can undergo a structural transformation to make silicatene, another stable, single layer structure of silica.

  14. Excitation of guided waves in layered structures with negative refraction.

    PubMed

    Shadrivov, Ilya; Ziolkowski, Richard; Zharov, Alexander; Kivshar, Yuri

    2005-01-24

    We study the electromagnetic beam reflection from layered structures that include the so-called double-negative metamaterials, also called left-handed metamaterials. We predict that such structures can demonstrate a giant lateral Goos-Hänchen shift of the scattered beam accompanied by a splitting of the reflected and transmitted beams due to the resonant excitation of surface waves at the interfaces between the conventional and double-negative materials as well as due to the excitation of leaky modes in the layered structures. The beam shift can be either positive or negative, depending on the type of the guided waves excited by the incoming beam. We also perform finite-difference time-domain simulations and confirm the major effects predicted analytically.

  15. 2D nanomaterials based electrochemical biosensors for cancer diagnosis.

    PubMed

    Wang, Lu; Xiong, Qirong; Xiao, Fei; Duan, Hongwei

    2017-03-15

    Cancer is a leading cause of death in the world. Increasing evidence has demonstrated that early diagnosis holds the key towards effective treatment outcome. Cancer biomarkers are extensively used in oncology for cancer diagnosis and prognosis. Electrochemical sensors play key roles in current laboratory and clinical analysis of diverse chemical and biological targets. Recent development of functional nanomaterials offers new possibilities of improving the performance of electrochemical sensors. In particular, 2D nanomaterials have stimulated intense research due to their unique array of structural and chemical properties. The 2D materials of interest cover broadly across graphene, graphene derivatives (i.e., graphene oxide and reduced graphene oxide), and graphene-like nanomaterials (i.e., 2D layered transition metal dichalcogenides, graphite carbon nitride and boron nitride nanomaterials). In this review, we summarize recent advances in the synthesis of 2D nanomaterials and their applications in electrochemical biosensing of cancer biomarkers (nucleic acids, proteins and some small molecules), and present a personal perspective on the future direction of this area.

  16. Material structure of two-/three-dimensional Si–C layers fabricated by hot-C+-ion implantation into Si-on-insulator substrate

    NASA Astrophysics Data System (ADS)

    Mizuno, Tomohisa; Omata, Yuhsuke; Nagamine, Yoshiki; Aoki, Takashi; Sameshima, Toshiyuki

    2017-04-01

    We experimentally studied the material structures of two-/three-dimensional (2D/3D) silicon carbon layers Si1‑ Y C Y with Y ≤ 0.25 and 5 ≤ N L ≤ 162 [N L is the atomic layer number of Si1‑ Y C Y )] on buried oxide (BOX), which were fabricated by hot-C+-ion implantation into a (100) silicon-on-insulator (SOI) substrate before an oxidation process. A 2D Si layer was also fabricated as a reference. The C 1s spectrum obtained by X-ray photoemission spectroscopy shows that the implanted C atoms segregate at the oxide interface. Using a scanning transmission electron microscope and a high-resolution scanning transmission electron microscope to observe cross sections of Si0.75C0.25 layers, 2-nm-thick 3C-SiC layers were found be partially formed in the C segregation layer near the BOX interface. At Y > 0.1 and 5 ≤ N L ≤ 162, we observed very strong photoluminescence (PL) emission in the UV/visible regions from a 3C-SiC area and a Si1‑ Y C Y area in the C segregation layer, whereas a 2D Si emitted weak PL photons only at N L < 10. Thus, the silicon carbon technique is very promising for Si photonics and bandgap engineering in CMOS.

  17. Optimization of SMA layers in composite structures to enhance damping

    NASA Astrophysics Data System (ADS)

    Haghdoust, P.; Cinquemani, S.; Lecis, N.; Bassani, P.

    2016-04-01

    The performance of lightweight structures can be severely affected by vibration. New design concepts leading to lightweight, slender structural components can increase the vulnerability of the components to failure due to excessive vibration. The intelligent approach to address the problem would be the use of materials which are more capable in dissipating the energy due to their high value of loss factor. Among the different materials available to achieve damping, much attention has been attached to the use of shape memory alloys (SMAs) because of their unique microstructure, leading to good damping capacity. This work describes the design and optimization of a hybrid layered composite structure for the passive suppression of flexural vibrations in slender and light structures. Embedding the SMA layers in composite structure allows to combine different properties: the lightness of the base composite (e.g. fiber glass), the mechanical strength of the insert of metallic material and the relevant damping properties of SMA, in the martensitic phase. In particular, we put our attention on embedding the CuZnAl in the form of thin sheet in a layered composite made by glass fiber reinforced epoxy. By appropriately positioning of the SMA sheets so that they are subjected to the maximum curvature, the damping of the hybrid system can be considerably enhanced. Accordingly analytical method for evaluating the energy dissipation of the thin sheets with different shapes and patterns is developed and is followed by a shape optimization based on genetic algorithm. Eventually different configurations of the hybrid beam structure with different patterns of SMA layer are proposed and compared in the term of damping capacity.

  18. Structural characterisation of a layered double hydroxide nanosheet

    NASA Astrophysics Data System (ADS)

    Funnell, Nicholas P.; Wang, Qiang; Connor, Leigh; Tucker, Matthew G.; O'Hare, Dermot; Goodwin, Andrew L.

    2014-06-01

    We report the atomic-scale structure of a Zn2Al-borate layered double hydroxide (LDH) nanosheet, as determined by reverse Monte Carlo (RMC) modelling of X-ray total scattering data. This study involves the extension of the RMC method to enable structural refinement of two-dimensional nanomaterials. The refined LDH models show the intra-layer geometry in this highly-exfoliated phase to be consistent with that observed in crystalline analogues, with the reciprocal-space scattering data suggesting a disordered arrangement of the Zn2+ and Al3+ cations within the nanosheet. The approach we develop is generalisable and so offers a method of characterising the structures of arbitrary nanosheet phases, including systems that support complex forms of disorder within the nanosheets themselves.We report the atomic-scale structure of a Zn2Al-borate layered double hydroxide (LDH) nanosheet, as determined by reverse Monte Carlo (RMC) modelling of X-ray total scattering data. This study involves the extension of the RMC method to enable structural refinement of two-dimensional nanomaterials. The refined LDH models show the intra-layer geometry in this highly-exfoliated phase to be consistent with that observed in crystalline analogues, with the reciprocal-space scattering data suggesting a disordered arrangement of the Zn2+ and Al3+ cations within the nanosheet. The approach we develop is generalisable and so offers a method of characterising the structures of arbitrary nanosheet phases, including systems that support complex forms of disorder within the nanosheets themselves. Electronic supplementary information (ESI) available. See DOI: 10.1039/c4nr01265h

  19. Multi-functional layered structure having structural and radiation shielding attributes

    NASA Technical Reports Server (NTRS)

    Kaul, Raj K. (Inventor); Barghouty, Abdulnasser Fakhri (Inventor); Penn, Benjamin G. (Inventor); Hulcher, Anthony Bruce (Inventor)

    2010-01-01

    A cosmic and solar radiation shielding structure that also has structural attributes is comprised of three layers. The first layer is 30-42 percent by volume of ultra-high molecular weight (UHMW) polyethylene fibers, 18-30 percent by volume of graphite fibers, and a remaining percent by volume of an epoxy resin matrix. The second layer is approximately 68 percent by volume of UHMW polyethylene fibers and a remaining percent by volume of a polyethylene matrix. The third layer is a ceramic material.

  20. Crystallographic structure and superconductive properties of Nb-Ti films with an artificially layered structure

    SciTech Connect

    Sato, N. )

    1990-06-15

    Artificially layered niobium-titanium (Nb-Ti) films with various thickness ratios (3/1--1/3) and periodicities (2--100 A) are made in an argon or in a mixed argon/nitrogen atmosphere by a dc magnetron sputtering method. Films with small periodicities (less than 30 A) have an artificial superlattice structure (ASL) with crystallographic coherence between constituent layers, where Nb and Ti grow epitaxially on the closest planes. The crystallographic structures of films are bcc with the (110) plane parallel to the film for films with the same or a thicker Nb layer than a Ti layer, and hcp with the (001) plane parallel to the film for films with a thinner Nb layer than a Ti layer. Films with large periodicities have an artificial superstructure (ASS) with only periodic stacking of constituent layers. Films deposited in the Ar/N atmosphere also have the artificially layered structures of ASL or ASS. The artificially layered structure is thermally stable at temperatures up to 500 {degree}C. The superconducting properties of the films depend strongly on the periodicity and thickness ratio of Nb and Ti layers. The dependence of the transition temperature on the periodicity and thickness ratio is qualitatively explained by a proximity effect with a three-region model. Films with periodicities less than 20 A, composed of the same or a thicker Nb layer than a Ti layer, show high transition temperatures (above 9.3 K). The highest {ital T}{sub {ital c}} of about 13.6 K is obtained in the film composed of monatomic layers of constituents deposited in an Ar atmosphere including 30 vol % N.

  1. Structure of a reconnection layer poleward of the cusp under extreme density asymmetry

    NASA Astrophysics Data System (ADS)

    Muzamil, F. M.; Farrugia, C. J.; Torbert, R. B.; Mozer, F.; Scudder, J. D.; Pritchett, P. L.; Russell, C. T.

    2012-12-01

    We present in situ observations made by the Polar spacecraft of a reconnection layer poleward of the northern cusp. Interplanetary conditions monitored by Wind showed an ICME with a strongly northward magnetic field (clock angle ~ 20 deg) lasting for ~13 hours. Polar traversed the layer several times from the magnetosphere (MSP) and magnetosheath (MSH) and recorded extreme density and temperature asymmetry (two and one order of magnitude, respectively) between the two regimes but none in the magnetic field. During each crossing of the layer Polar intercepted sunward-flowing jets. Supplementing the Polar data by DMSP passes we show continued patterns of reverse convection in the northern hemisphere. We examine one crossing in detail. Using the adiabatic expansion parameter we show that the ion diffusion region was encountered. We find several features which are in agreement with the 2D PIC simulations of Tanaka et al. (Ann. Geophys. 26, 2008). Thus: (i) The prominent density dip region is detected at the separatrix (SR) region on the MSP side side of the magnetopause. (ii) The intense electric field normal to the magnetopause points to the center of the magnetopause at the location where the density dip is detected. (iii) The ion bulk outflow jet due to magnetic reconnection is seen to be biased strongly towards the MSP side. (iv) The out-of-plane magnetic field (the Hall magnetic field) has a unipolar structure. Details on the electron dynamics are also discussed.

  2. 2D quasiperiodic plasmonic crystals

    PubMed Central

    Bauer, Christina; Kobiela, Georg; Giessen, Harald

    2012-01-01

    Nanophotonic structures with irregular symmetry, such as quasiperiodic plasmonic crystals, have gained an increasing amount of attention, in particular as potential candidates to enhance the absorption of solar cells in an angular insensitive fashion. To examine the photonic bandstructure of such systems that determines their optical properties, it is necessary to measure and model normal and oblique light interaction with plasmonic crystals. We determine the different propagation vectors and consider the interaction of all possible waveguide modes and particle plasmons in a 2D metallic photonic quasicrystal, in conjunction with the dispersion relations of a slab waveguide. Using a Fano model, we calculate the optical properties for normal and inclined light incidence. Comparing measurements of a quasiperiodic lattice to the modelled spectra for angle of incidence variation in both azimuthal and polar direction of the sample gives excellent agreement and confirms the predictive power of our model. PMID:23209871

  3. Single-layer honeycomb like structure of silica

    NASA Astrophysics Data System (ADS)

    Cahangirov, Seymur; Ozcelik, V. Ongun; Ciraci, Salim

    2014-03-01

    Silica or SiO2, the main constituent of earth's rocks has several 3D complex crystalline and amorphous phases, but it does not have a graphite like layered structure in 3D. Our theoretical analysis and numerical calculations from the first-principles predict that silica can have stable, suspended, single-layer honeycomb like allotrope, h α-silica (silicatene), which can be viewed to be derived from the oxidation of silicene and it has intriguing atomic structure with re-entrant angles in hexagons. It is a wide band gap semiconductor, which attains remarkable electromechanical properties showing geometrical changes under external electric field. In particular, it is an auxetic nanomaterial with negative Poisson's ratio and has high piezoelectric coefficient. Coverage of foreign adatoms can attribute new functionalities to h α-silica such that by oxidation it turns into to a wide band gap insulator like the parent quartz.

  4. Orthotropic Piezoelectricity in 2D Nanocellulose

    NASA Astrophysics Data System (ADS)

    García, Y.; Ruiz-Blanco, Yasser B.; Marrero-Ponce, Yovani; Sotomayor-Torres, C. M.

    2016-10-01

    The control of electromechanical responses within bonding regions is essential to face frontier challenges in nanotechnologies, such as molecular electronics and biotechnology. Here, we present Iβ-nanocellulose as a potentially new orthotropic 2D piezoelectric crystal. The predicted in-layer piezoelectricity is originated on a sui-generis hydrogen bonds pattern. Upon this fact and by using a combination of ab-initio and ad-hoc models, we introduce a description of electrical profiles along chemical bonds. Such developments lead to obtain a rationale for modelling the extended piezoelectric effect originated within bond scales. The order of magnitude estimated for the 2D Iβ-nanocellulose piezoelectric response, ~pm V‑1, ranks this material at the level of currently used piezoelectric energy generators and new artificial 2D designs. Such finding would be crucial for developing alternative materials to drive emerging nanotechnologies.

  5. Orthotropic Piezoelectricity in 2D Nanocellulose

    PubMed Central

    García, Y.; Ruiz-Blanco, Yasser B.; Marrero-Ponce, Yovani; Sotomayor-Torres, C. M.

    2016-01-01

    The control of electromechanical responses within bonding regions is essential to face frontier challenges in nanotechnologies, such as molecular electronics and biotechnology. Here, we present Iβ-nanocellulose as a potentially new orthotropic 2D piezoelectric crystal. The predicted in-layer piezoelectricity is originated on a sui-generis hydrogen bonds pattern. Upon this fact and by using a combination of ab-initio and ad-hoc models, we introduce a description of electrical profiles along chemical bonds. Such developments lead to obtain a rationale for modelling the extended piezoelectric effect originated within bond scales. The order of magnitude estimated for the 2D Iβ-nanocellulose piezoelectric response, ~pm V−1, ranks this material at the level of currently used piezoelectric energy generators and new artificial 2D designs. Such finding would be crucial for developing alternative materials to drive emerging nanotechnologies. PMID:27708364

  6. Orthotropic Piezoelectricity in 2D Nanocellulose.

    PubMed

    García, Y; Ruiz-Blanco, Yasser B; Marrero-Ponce, Yovani; Sotomayor-Torres, C M

    2016-10-06

    The control of electromechanical responses within bonding regions is essential to face frontier challenges in nanotechnologies, such as molecular electronics and biotechnology. Here, we present Iβ-nanocellulose as a potentially new orthotropic 2D piezoelectric crystal. The predicted in-layer piezoelectricity is originated on a sui-generis hydrogen bonds pattern. Upon this fact and by using a combination of ab-initio and ad-hoc models, we introduce a description of electrical profiles along chemical bonds. Such developments lead to obtain a rationale for modelling the extended piezoelectric effect originated within bond scales. The order of magnitude estimated for the 2D Iβ-nanocellulose piezoelectric response, ~pm V(-1), ranks this material at the level of currently used piezoelectric energy generators and new artificial 2D designs. Such finding would be crucial for developing alternative materials to drive emerging nanotechnologies.

  7. Three-Dimensional Structure of Plane Mixing Layers.

    NASA Astrophysics Data System (ADS)

    Bell, James Horatio

    Recent studies have shown the existence of an organized and persistent streamwise vortex structure in plane mixing layers, which is believed to take the form of a row of alternating-sign streamwise vortices. So far, this streamwise vortex structure has been studied mostly through flow-visualization at relatively low Reynolds numbers. The main objective of the present work was to obtain quantitative measurements of the streamwise vorticity at Reynolds numbers more comparable to those commonly found in practical applications. In the first experiment, the artificially induced streamwise vortex was observed to decay as approximately 1/X^2 within the mixing layer. The effect of the vortex was to locally distort the mean strain distribution in the mixing layer, thus altering the production of the Reynolds stresses. Peak values of the normal stresses were increased by about 20% over the undisturbed case in the region of the streamwise vortex. In particular a strong, pronounced peak was generated in the secondary shear stress, (overline{u^' w^ '}).. In the second experiment, "naturally-occurring" streamwise vorticity was clearly observed in a two-stream mixing layer. Concentrated streamwise vortices appeared just downstream of the first roll-up of the spanwise vorticity, with an initial circulation which was roughly half that of the spanwise vortex circulation. The streamwise vortices first appeared in "clusters", the positions of which seemed to be related to small disturbances in one of the upstream boundary layers. The clusters quickly reorganized into a single row of alternating-sign vortices under the influence of vortex dynamics and changes in the normal stress anisotropy. The streamwise vortex spacing increased in a stepwise fashion, at least partially through the amalgamation of like-sign vortices. The wavelength of the streamwise vortices increased approximately as the mixing layer vorticity thickness, while their strength decayed as roughly 1/X^ {1.5}. In the

  8. Quantum-confinement and Structural Anisotropy result in Electrically-Tunable Dirac Cone in Few-layer Black Phosphorous.

    PubMed

    Dolui, Kapildeb; Quek, Su Ying

    2015-07-01

    Two-dimensional (2D) materials are well-known to exhibit interesting phenomena due to quantum confinement. Here, we show that quantum confinement, together with structural anisotropy, result in an electric-field-tunable Dirac cone in 2D black phosphorus. Using density functional theory calculations, we find that an electric field, E ext, applied normal to a 2D black phosphorus thin film, can reduce the direct band gap of few-layer black phosphorus, resulting in an insulator-to-metal transition at a critical field, Ec. Increasing E ext beyond Ec can induce a Dirac cone in the system, provided the black phosphorus film is sufficiently thin. The electric field strength can tune the position of the Dirac cone and the Dirac-Fermi velocities, the latter being similar in magnitude to that in graphene. We show that the Dirac cone arises from an anisotropic interaction term between the frontier orbitals that are spatially separated due to the applied field, on different halves of the 2D slab. When this interaction term becomes vanishingly small for thicker films, the Dirac cone can no longer be induced. Spin-orbit coupling can gap out the Dirac cone at certain electric fields; however, a further increase in field strength reduces the spin-orbit-induced gap, eventually resulting in a topological-insulator-to-Dirac-semimetal transition.

  9. Thermal structure in the Venus middle cloud layer

    NASA Technical Reports Server (NTRS)

    Linkin, V. M.; Lipatov, A. N.; Shurupov, A. A.; Ignatova, S. P.; Frank, G. A.; Seiff, A.; Ragent, B.; Young, R. E.; Elson, L. S.; Preston, R. A.

    1986-01-01

    Thermal structure measurements obtained by the two Vega balloons show the Venus atmosphere in the middle cloud layer to be near-adiabatic, on the whole; but discrete air masses are present that differ slightly from one another in potential temperature and entropy. The Vega 1 temperatures are 6.5 K warmer than measured by Vega 2 at given pressures. Measurements taken by the Vega 2 lander on descent through these levels agree with the Vega 2 balloon data.

  10. Investigation of the Turbulence Producing Structures in the Boundary Layer

    DTIC Science & Technology

    1991-07-15

    34 . I, IS ieq/noni fCg of M na emE-t Ind Sudag". 0 8ew Or% Aodu tiOm Prole" (0704411), W.ash gon. OC 20SO3. ... RT DATE 3. REPORT TYPE AND DATE...Spalart, P.R., Spatial Character and Time Evolution of Coherent Structures in a Numerically Simulated Boundary Layer, AIAA 88-3577, 19884 ak Robinson

  11. 2-d Finite Element Code Postprocessor

    SciTech Connect

    Sanford, L. A.; Hallquist, J. O.

    1996-07-15

    ORION is an interactive program that serves as a postprocessor for the analysis programs NIKE2D, DYNA2D, TOPAZ2D, and CHEMICAL TOPAZ2D. ORION reads binary plot files generated by the two-dimensional finite element codes currently used by the Methods Development Group at LLNL. Contour and color fringe plots of a large number of quantities may be displayed on meshes consisting of triangular and quadrilateral elements. ORION can compute strain measures, interface pressures along slide lines, reaction forces along constrained boundaries, and momentum. ORION has been applied to study the response of two-dimensional solids and structures undergoing finite deformations under a wide variety of large deformation transient dynamic and static problems and heat transfer analyses.

  12. Models for UT inspection of bolthole cracks in layered structures

    NASA Astrophysics Data System (ADS)

    Grandin, Robert; Gray, Tim; Roberts, Ron

    2017-02-01

    Due to the geometrical complexities of bolted, layered airframe structures, the application of Model Assisted Probability of Detection, or MAPOD, is an important tool for helping to assess the ultrasonic inspectability of those components. Of particular importance is the need to inspect for cracks on or near boltholes in those structures. This presentation describes the development and testing of analytical computer models of and their application to bolthole crack inspection. The modeling approach includes approximate, paraxial, bulk-wave models as well as more rigorous, analytical models that include both bulk and surface/plate modes. The simpler models have the flexibility and computational efficiency to handle complex geometries and structures. The more exact, rigorous models apply to simpler, canonical geometries for use in benchmarking and assessing the accuracy of the paraxial models. Previous model results for single layers will be reviewed and application of the models to multiple layers will be highlighted. Extensions of the models to more complex geometries and materials, computational challenges to future model development, and applications of the models to MAPOD, and will also be addressed.

  13. Single Layer Bismuth Iodide: Computational Exploration of Structural, Electrical, Mechanical and Optical Properties.

    PubMed

    Ma, Fengxian; Zhou, Mei; Jiao, Yalong; Gao, Guoping; Gu, Yuantong; Bilic, Ante; Chen, Zhongfang; Du, Aijun

    2015-12-02

    Layered graphitic materials exhibit new intriguing electronic structure and the search for new types of two-dimensional (2D) monolayer is of importance for the fabrication of next generation miniature electronic and optoelectronic devices. By means of density functional theory (DFT) computations, we investigated in detail the structural, electronic, mechanical and optical properties of the single-layer bismuth iodide (BiI3) nanosheet. Monolayer BiI3 is dynamically stable as confirmed by the computed phonon spectrum. The cleavage energy (Ecl) and interlayer coupling strength of bulk BiI3 are comparable to the experimental values of graphite, which indicates that the exfoliation of BiI3 is highly feasible. The obtained stress-strain curve shows that the BiI3 nanosheet is a brittle material with a breaking strain of 13%. The BiI3 monolayer has an indirect band gap of 1.57 eV with spin orbit coupling (SOC), indicating its potential application for solar cells. Furthermore, the band gap of BiI3 monolayer can be modulated by biaxial strain. Most interestingly, interfacing electrically active graphene with monolayer BiI3 nanosheet leads to enhanced light absorption compared to that in pure monolayer BiI3 nanosheet, highlighting its great potential applications in photonics and photovoltaic solar cells.

  14. Single Layer Bismuth Iodide: Computational Exploration of Structural, Electrical, Mechanical and Optical Properties

    NASA Astrophysics Data System (ADS)

    Ma, Fengxian; Zhou, Mei; Jiao, Yalong; Gao, Guoping; Gu, Yuantong; Bilic, Ante; Chen, Zhongfang; Du, Aijun

    2015-12-01

    Layered graphitic materials exhibit new intriguing electronic structure and the search for new types of two-dimensional (2D) monolayer is of importance for the fabrication of next generation miniature electronic and optoelectronic devices. By means of density functional theory (DFT) computations, we investigated in detail the structural, electronic, mechanical and optical properties of the single-layer bismuth iodide (BiI3) nanosheet. Monolayer BiI3 is dynamically stable as confirmed by the computed phonon spectrum. The cleavage energy (Ecl) and interlayer coupling strength of bulk BiI3 are comparable to the experimental values of graphite, which indicates that the exfoliation of BiI3 is highly feasible. The obtained stress-strain curve shows that the BiI3 nanosheet is a brittle material with a breaking strain of 13%. The BiI3 monolayer has an indirect band gap of 1.57 eV with spin orbit coupling (SOC), indicating its potential application for solar cells. Furthermore, the band gap of BiI3 monolayer can be modulated by biaxial strain. Most interestingly, interfacing electrically active graphene with monolayer BiI3 nanosheet leads to enhanced light absorption compared to that in pure monolayer BiI3 nanosheet, highlighting its great potential applications in photonics and photovoltaic solar cells.

  15. Facile preparation, optical and electrochemical properties of layer-by-layer V2O5 quadrate structures

    NASA Astrophysics Data System (ADS)

    Zhang, Yifu; Zheng, Jiqi; Wang, Qiushi; Hu, Tao; Tian, Fuping; Meng, Changgong

    2017-03-01

    Layer-by-layer V2O5 structures self-assembly by quadrate sheets like "multilayer cake" were successfully synthesized using NH4VO3 as the vanadium sources by a facile hydrothermal route and combination of the calcination. The structure and composition were characterized by field emission scanning electron microscopy, energy-dispersive X-ray spectrometer, X-ray powder diffraction, Raman and Fourier transform infrared spectroscopy. The optical properties of the as-obtained V2O5 layer-by-layer structures were investigated by the Ultraviolet-visible spectroscopy and photoluminescence spectrum. The electrochemical properties of the as-obtained V2O5 layer-by-layer structures as electrodes in supercapacitor device were measured by cyclic voltammetry (CV) and galvanostatic charge-discharge (GCD) both in the aqueous and organic electrolyte. The specific capacitance is 347 F g-1 at 1 A g-1 in organic electrolyte, which is improved by 46% compared with 238 F g-1 in aqueous electrolyte. During the cycle performance, the specific capacitances of V2O5 layer-by-layer structures after 100 cycles are 30% and 82% of the initial discharge capacity in the aqueous and organic electrolyte, respectively, indicating the cycle performance is significantly improved in organic electrolyte. Our results turn out that layer-by-layer V2O5 structures are an ideal material for supercapacitor electrode in the present work.

  16. Plasmon and exciton superconductivity mechanisms in layered structures

    NASA Technical Reports Server (NTRS)

    Gabovich, A. M.; Pashitskiy, E. A.; Uvarova, S. K.

    1977-01-01

    Plasmon and exciton superconductivity mechanisms are discussed. Superconductivity in a three layer metal semiconductor metal and insulator semimetal insulator sandwich structure was described in terms of the temperature dependent Green function of the longitudinal (Coulomb) field. The dependences of the superconducting transition temperature on structure parameters were obtained. In a semiconducting film, as a result of interactions of degenerate free carriers with excitons, superconductivity exists only in a certain range of parameter values, and the corresponding critical temperature is much lower than in the plasmon mechanism of superconductivity.

  17. Quantum coherence selective 2D Raman–2D electronic spectroscopy

    PubMed Central

    Spencer, Austin P.; Hutson, William O.; Harel, Elad

    2017-01-01

    Electronic and vibrational correlations report on the dynamics and structure of molecular species, yet revealing these correlations experimentally has proved extremely challenging. Here, we demonstrate a method that probes correlations between states within the vibrational and electronic manifold with quantum coherence selectivity. Specifically, we measure a fully coherent four-dimensional spectrum which simultaneously encodes vibrational–vibrational, electronic–vibrational and electronic–electronic interactions. By combining near-impulsive resonant and non-resonant excitation, the desired fifth-order signal of a complex organic molecule in solution is measured free of unwanted lower-order contamination. A critical feature of this method is electronic and vibrational frequency resolution, enabling isolation and assignment of individual quantum coherence pathways. The vibronic structure of the system is then revealed within an otherwise broad and featureless 2D electronic spectrum. This method is suited for studying elusive quantum effects in which electronic transitions strongly couple to phonons and vibrations, such as energy transfer in photosynthetic pigment–protein complexes. PMID:28281541

  18. Quantum coherence selective 2D Raman-2D electronic spectroscopy

    NASA Astrophysics Data System (ADS)

    Spencer, Austin P.; Hutson, William O.; Harel, Elad

    2017-03-01

    Electronic and vibrational correlations report on the dynamics and structure of molecular species, yet revealing these correlations experimentally has proved extremely challenging. Here, we demonstrate a method that probes correlations between states within the vibrational and electronic manifold with quantum coherence selectivity. Specifically, we measure a fully coherent four-dimensional spectrum which simultaneously encodes vibrational-vibrational, electronic-vibrational and electronic-electronic interactions. By combining near-impulsive resonant and non-resonant excitation, the desired fifth-order signal of a complex organic molecule in solution is measured free of unwanted lower-order contamination. A critical feature of this method is electronic and vibrational frequency resolution, enabling isolation and assignment of individual quantum coherence pathways. The vibronic structure of the system is then revealed within an otherwise broad and featureless 2D electronic spectrum. This method is suited for studying elusive quantum effects in which electronic transitions strongly couple to phonons and vibrations, such as energy transfer in photosynthetic pigment-protein complexes.

  19. Quantum coherence selective 2D Raman-2D electronic spectroscopy.

    PubMed

    Spencer, Austin P; Hutson, William O; Harel, Elad

    2017-03-10

    Electronic and vibrational correlations report on the dynamics and structure of molecular species, yet revealing these correlations experimentally has proved extremely challenging. Here, we demonstrate a method that probes correlations between states within the vibrational and electronic manifold with quantum coherence selectivity. Specifically, we measure a fully coherent four-dimensional spectrum which simultaneousl