Science.gov

Sample records for 2nd floor 1st

  1. 6. 2nd floor where stables used to be; note bottom ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    6. 2nd floor where stables used to be; note bottom of truss with suspension rods for floor which results in clear span on 1st level - Diebolt Brewing Company Stable, 2695 Pittsburgh Avenue, Cleveland, Cuyahoga County, OH

  2. Psychiatric Diagnosis and Concomitant Medical Treatment for 1st and 2nd Grade Children

    ERIC Educational Resources Information Center

    Cornell-Swanson, La Vonne; Frankenberger, William; Ley, Katie; Bowman, Krista

    2007-01-01

    This study examined the proportion of children in 1st and 2nd grade classes who were currently prescribed medication for psychotropic disorders. The study also examined the attitudes of 1st and 2nd grade teachers toward diagnosis of psychiatric disorders and use of psychiatric medication to treat children. Results of the current study indicate…

  3. 1st- and 2nd-order motion and texture resolution in central and peripheral vision

    NASA Technical Reports Server (NTRS)

    Solomon, J. A.; Sperling, G.

    1995-01-01

    STIMULI. The 1st-order stimuli are moving sine gratings. The 2nd-order stimuli are fields of static visual texture, whose contrasts are modulated by moving sine gratings. Neither the spatial slant (orientation) nor the direction of motion of these 2nd-order (microbalanced) stimuli can be detected by a Fourier analysis; they are invisible to Reichardt and motion-energy detectors. METHOD. For these dynamic stimuli, when presented both centrally and in an annular window extending from 8 to 10 deg in eccentricity, we measured the highest spatial frequency for which discrimination between +/- 45 deg texture slants and discrimination between opposite directions of motion were each possible. RESULTS. For sufficiently low spatial frequencies, slant and direction can be discriminated in both central and peripheral vision, for both 1st- and for 2nd-order stimuli. For both 1st- and 2nd-order stimuli, at both retinal locations, slant discrimination is possible at higher spatial frequencies than direction discrimination. For both 1st- and 2nd-order stimuli, motion resolution decreases 2-3 times more rapidly with eccentricity than does texture resolution. CONCLUSIONS. (1) 1st- and 2nd-order motion scale similarly with eccentricity. (2) 1st- and 2nd-order texture scale similarly with eccentricity. (3) The central/peripheral resolution fall-off is 2-3 times greater for motion than for texture.

  4. VIEW SOUTH/SOUTHEAST LOOKING DOWN ON 2ND AQUEDUCT AND 1ST AQUEDUCT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    VIEW SOUTH/SOUTHEAST LOOKING DOWN ON 2ND AQUEDUCT AND 1ST AQUEDUCT CASCADES TOWARDS FILTRATION PLANT AND LOS ANGELES RESERVOIR - Los Angeles Aqueduct, Cascades Structures, Los Angeles, Los Angeles County, CA

  5. 4. VIEW WEST, WEST SIDE, SHOWING CHANNELS 1ST AND 2ND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    4. VIEW WEST, WEST SIDE, SHOWING CHANNELS 1ST AND 2ND VERTICAL BRACED DOUBLE ANGLES, DIAGONAL BRACING AND CROSS BRACED RAILING - Thirty-Sixth Street Bridge, Spanning Rabbit River, Hamilton, Allegan County, MI

  6. MAGAZINE E30. VIEW FROM BETWEEN 1ST AND 2ND BLAST WALL ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    MAGAZINE E-30. VIEW FROM BETWEEN 1ST AND 2ND BLAST WALL LOOKING TO THE REAR OF THE MAGAZINE. - Naval Magazine Lualualei, Waikele Branch, Tunnel Magazine Type, Waikakalaua & Kipapa Gulches, Pearl City, Honolulu County, HI

  7. If 1st Baby's Early, 2nd Will Be Too: Study

    MedlinePlus

    ... If 1st Baby's Early, 2nd Will Be Too: Study Chances just as high for women who go ... it really is a potent factor," said senior study author Laura Jelliffe-Pawlowski. She is associate director ...

  8. 2ND FLOOR HALLWAY LOOKING EAST, NOTE PRESSED TIN CEILING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    2ND FLOOR HALLWAY LOOKING EAST, NOTE PRESSED TIN CEILING - New York State Soldiers & Sailors Home, Building No. 29, Department of Veterans Affairs Medical Center, 76 Veterans Avenue, Bath, Steuben County, NY

  9. 26. VIEW OF CUT AWAY FLOOR BUILDING 23 2ND FLOOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    26. VIEW OF CUT AWAY FLOOR BUILDING 23 2ND FLOOR SHOWING TYPICAL MILL CONSTRUCTION (SECTION OF FLOOR CONTAMINATED WITH HAZARDOUS MATERIAL WAS REMOVED FOR DISPOSAL) - Bryant Electric Company, 1421 State Street, Bridgeport, Fairfield County, CT

  10. The relation between 1st grade grey matter volume and 2nd grade math competence.

    PubMed

    Price, Gavin R; Wilkey, Eric D; Yeo, Darren J; Cutting, Laurie E

    2016-01-01

    Mathematical and numerical competence is a critical foundation for individual success in modern society yet the neurobiological sources of individual differences in math competence are poorly understood. Neuroimaging research over the last decade suggests that neural mechanisms in the parietal lobe, particularly the intraparietal sulcus (IPS) are structurally aberrant in individuals with mathematical learning disabilities. However, whether those same brain regions underlie individual differences in math performance across the full range of math abilities is unknown. Furthermore, previous studies have been exclusively cross-sectional, making it unclear whether variations in the structure of the IPS are caused by or consequences of the development of math skills. The present study investigates the relation between grey matter volume across the whole brain and math competence longitudinally in a representative sample of 50 elementary school children. Results show that grey matter volume in the left IPS at the end of 1st grade relates to math competence a year later at the end of 2nd grade. Grey matter volume in this region did not change over that year, and was still correlated with math competence at the end of 2nd grade. These findings support the hypothesis that the IPS and its associated functions represent a critical foundation for the acquisition of mathematical competence. PMID:26334946

  11. The relation between 1st grade grey matter volume and 2nd grade math competence.

    PubMed

    Price, Gavin R; Wilkey, Eric D; Yeo, Darren J; Cutting, Laurie E

    2016-01-01

    Mathematical and numerical competence is a critical foundation for individual success in modern society yet the neurobiological sources of individual differences in math competence are poorly understood. Neuroimaging research over the last decade suggests that neural mechanisms in the parietal lobe, particularly the intraparietal sulcus (IPS) are structurally aberrant in individuals with mathematical learning disabilities. However, whether those same brain regions underlie individual differences in math performance across the full range of math abilities is unknown. Furthermore, previous studies have been exclusively cross-sectional, making it unclear whether variations in the structure of the IPS are caused by or consequences of the development of math skills. The present study investigates the relation between grey matter volume across the whole brain and math competence longitudinally in a representative sample of 50 elementary school children. Results show that grey matter volume in the left IPS at the end of 1st grade relates to math competence a year later at the end of 2nd grade. Grey matter volume in this region did not change over that year, and was still correlated with math competence at the end of 2nd grade. These findings support the hypothesis that the IPS and its associated functions represent a critical foundation for the acquisition of mathematical competence.

  12. Teachers' Spatial Anxiety Relates to 1st-and 2nd-Graders' Spatial Learning

    ERIC Educational Resources Information Center

    Gunderson, Elizabeth A.; Ramirez, Gerardo; Beilock, Sian L.; Levine, Susan C.

    2013-01-01

    Teachers' anxiety about an academic domain, such as math, can impact students' learning in that domain. We asked whether this relation held in the domain of spatial skill, given the importance of spatial skill for success in math and science and its malleability at a young age. We measured 1st-and 2nd-grade teachers' spatial anxiety…

  13. BMI differences in 1st and 2nd generation immigrants of Asian and European origin to Australia.

    PubMed

    Hauck, Katharina; Hollingsworth, Bruce; Morgan, Lawrie

    2011-01-01

    We estimate assimilation of immigrants' body mass index (BMI) to the host population of Australia over one generation, conducting separate analyses for immigrants from 7 regions of Europe and Asia. We use quantile regressions to allow for differing impact of generational status across 19 quantiles of BMI from under-weight to morbidly obese individuals. We find that 1st generation South European immigrants have higher, and South and East Asian immigrants have lower BMI than Australians, but have assimilated to the BMI of their hosts in the 2nd generation. There are no or only small BMI differences between Australians and 1st and 2nd generation immigrants from East Europe, North-West Europe, Middle East and Pacific regions. We conclude that both upward and downward assimilation in some immigrant groups is most likely caused by factors which can change over one generation (such as acculturation), and not factors which would take longer to change (such as genetics). Our results suggest that public health policies targeting the lifestyles of well educated Asian immigrants may be effective in preventing BMI increase in this subgroup.

  14. 21. VIEW FROM INTERIOR OF 2ND FLOOR ARCHED WINDOW WITH ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    21. VIEW FROM INTERIOR OF 2ND FLOOR ARCHED WINDOW WITH HOLLOW STEEL SASH AND POLISHED PLATE WIRE GLASS. THIS WINDOW IS AT THE FRONT OF THE BUILDING. - Pacific Telephone & Telegraph Company Building, 1519 Franklin Street, Oakland, Alameda County, CA

  15. 37. MILL NO. 2, 2nd FLOOR, CLOSE SHOT OF 2 ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    37. MILL NO. 2, 2nd FLOOR, CLOSE SHOT OF 2 CREEL MACHINES, WHICH FEED YARN INTO KNITTING MACHINES. - Prattville Manufacturing Company, Number One, 242 South Court Street, Prattville, Autauga County, AL

  16. 27. INTERIOR, ADMINISTRATION BUILDING, 2ND FLOOR, SOUTHEAST CORNER SPACE, LOOKING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    27. INTERIOR, ADMINISTRATION BUILDING, 2ND FLOOR, SOUTHEAST CORNER SPACE, LOOKING UP AT CIRCULAR MOTIF AND BANDS IN THE CEILING ABOVE THE ACOUSTICAL TILES - Ford Motor Company Plant, 700 South Union Street, Alexandria, Independent City, VA

  17. 22. MILL NO. 1, 2nd FLOOR, LIGHT TABLES AND KNITTING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    22. MILL NO. 1, 2nd FLOOR, LIGHT TABLES AND KNITTING MACHINE. LIGHT TABLE USED TO CHECK FOR CLOTH DEFECTS. - Prattville Manufacturing Company, Number One, 242 South Court Street, Prattville, Autauga County, AL

  18. 12. CLOSEUP VIEW OF 2ND FLOOR WINDOW SHOWING THE WHITE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    12. CLOSE-UP VIEW OF 2ND FLOOR WINDOW SHOWING THE WHITE GLAZED TERRA COTTA DETAILS, AT FRONT ELEVATION. - Pacific Telephone & Telegraph Company Building, 1519 Franklin Street, Oakland, Alameda County, CA

  19. 12. Bldg #13, 2nd floor, interior stone walls w/windows and ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    12. Bldg #13, 2nd floor, interior stone walls w/windows and bent pipe thru wall L and light bulbs in ceiling, to NE - Lawrence Machine Shop, Building No. 13, Union & Canal Streets, Lawrence, Essex County, MA

  20. 14. Building 105, Facilities Engineering Building, 1830, interior, 1st floor, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    14. Building 105, Facilities Engineering Building, 1830, interior, 1st floor, crib area of building, showing electrical and plumbing cribs, wall and ceiling detail, looking S. - Watervliet Arsenal, Building 105, South Broadway, on Hudson River, Watervliet, Albany County, NY

  1. 7. 1ST FLOOR, LOOKING SOUTH SHOWING DINING ROOM FIREPLACE (LEFT); ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    7. 1ST FLOOR, LOOKING SOUTH SHOWING DINING ROOM FIREPLACE (LEFT); ENTRY SITTING ROOM FIREPLACE (RIGHT) AND LIVING ROOM (BACKGROUND). - Fort Riley, Building No. 4, 4 Barry Avenue, Riley, Riley County, KS

  2. 62. Neg. No. F75A, Jun 18, 1930, INTERIORWAREHOUSE, 1ST FLOOR, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    62. Neg. No. F-75A, Jun 18, 1930, INTERIOR-WAREHOUSE, 1ST FLOOR, STORAGE OF AUTOMOBILE COMPONENTS - Ford Motor Company Long Beach Assembly Plant, Assembly Building, 700 Henry Ford Avenue, Long Beach, Los Angeles County, CA

  3. Hybrid distributed Raman amplification combining random fiber laser based 2nd-order and low-noise LD based 1st-order pumping.

    PubMed

    Jia, Xin-Hong; Rao, Yun-Jiang; Yuan, Cheng-Xu; Li, Jin; Yan, Xiao-Dong; Wang, Zi-Nan; Zhang, Wei-Li; Wu, Han; Zhu, Ye-Yu; Peng, Fei

    2013-10-21

    A configuration of hybrid distributed Raman amplification (H-DRA), that is formed by incorporating a random fiber laser (RFL) based 2nd-order pump and a low-noise laser-diode (LD) based 1st-order pump, is proposed in this paper. In comparison to conventional bi-directional 1st-order DRA, the effective noise figure (ENF) is found to be lower by amount of 0 to 4 dB due to the RFL-based 2nd-order pump, depending on the on-off gain, while the low-noise 1st-order Raman pump is used for compensating the worsened signal-to-noise ratio (SNR) in the vicinity towards the far end of the fiber and avoiding the potential nonlinear impact induced by excess injection of pump power and suppressing the pump-signal relative intensity noise (RIN) transfer. As a result, the gain distribution can be optimized along ultra-long fiber link, due to combination of the 2nd-order RFL and low-noise 1st-order pumping, making the transmission distance be extended significantly. We utilized such a configuration to achieve ultra-long-distance distributed sensing based on Brillouin optical time-domain analysis (BOTDA). A repeater-less sensing distance record of up to 154.4 km with 5 m spatial resolution and ~ ± 1.4 °C temperature uncertainty is successfully demonstrated.

  4. All-optical 1st- and 2nd-order differential equation solvers with large tuning ranges using Fabry-Pérot semiconductor optical amplifiers.

    PubMed

    Chen, Kaisheng; Hou, Jie; Huang, Zhuyang; Cao, Tong; Zhang, Jihua; Yu, Yuan; Zhang, Xinliang

    2015-02-01

    We experimentally demonstrate an all-optical temporal computation scheme for solving 1st- and 2nd-order linear ordinary differential equations (ODEs) with tunable constant coefficients by using Fabry-Pérot semiconductor optical amplifiers (FP-SOAs). By changing the injection currents of FP-SOAs, the constant coefficients of the differential equations are practically tuned. A quite large constant coefficient tunable range from 0.0026/ps to 0.085/ps is achieved for the 1st-order differential equation. Moreover, the constant coefficient p of the 2nd-order ODE solver can be continuously tuned from 0.0216/ps to 0.158/ps, correspondingly with the constant coefficient q varying from 0.0000494/ps(2) to 0.006205/ps(2). Additionally, a theoretical model that combining the carrier density rate equation of the semiconductor optical amplifier (SOA) with the transfer function of the Fabry-Pérot (FP) cavity is exploited to analyze the solving processes. For both 1st- and 2nd-order solvers, excellent agreements between the numerical simulations and the experimental results are obtained. The FP-SOAs based all-optical differential-equation solvers can be easily integrated with other optical components based on InP/InGaAsP materials, such as laser, modulator, photodetector and waveguide, which can motivate the realization of the complicated optical computing on a single integrated chip.

  5. The Hyphen as a Syllabification Cue in Reading Bisyllabic and Multisyllabic Words among Finnish 1st and 2nd Graders

    ERIC Educational Resources Information Center

    Häikiö, Tuomo; Bertram, Raymond; Hyönä, Jukka

    2016-01-01

    Finnish ABC books present words with hyphens inserted at syllable boundaries. Syllabification by hyphens is abandoned in the 2nd grade for bisyllabic words, but continues for words with three or more syllables. The current eye movement study investigated how and to what extent syllable hyphens in bisyllabic ("kah-vi" "cof-fee")…

  6. 24. OVERALL OF 1st FLOOR OF MILL NO. 1. PALLETS ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    24. OVERALL OF 1st FLOOR OF MILL NO. 1. PALLETS HELD CLOTH IN STORAGE IN LATE 20th CENTURY. IRON POSTS IN LEFT DISTANCE FRONTED CLOTH BINS. HISTORIAN LEEANN LANDS IN BACKGROUND WITH LIGHT. - Prattville Manufacturing Company, Number One, 242 South Court Street, Prattville, Autauga County, AL

  7. 46. NORTH END OF MILL NO. 2, 1st FLOOR, BELOW ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    46. NORTH END OF MILL NO. 2, 1st FLOOR, BELOW PICKER AND CLOTH ROOM AREA. FUNCTION OF THIS SPACE UNKNOWN AT PRESENT. NOTE THAT EYE BEAM REPLACES ORIGINAL WALL OF 1892 PICKER HOUSE. CENTER (OR LEFT) DOOR IS ENTRY TO MILL NO. 2. RIGHT DOOR IS ENTRY TO 1892 NAPPER ROOM. - Prattville Manufacturing Company, Number One, 242 South Court Street, Prattville, Autauga County, AL

  8. New approaches for improving the production of the 1st and 2nd generation ethanol by yeast.

    PubMed

    Kurylenko, Olena; Semkiv, Marta; Ruchala, Justyna; Hryniv, Orest; Kshanovska, Barbara; Abbas, Charles; Dmytruk, Kostyantyn; Sibirny, Andriy

    2016-01-01

    Increase in the production of 1st generation ethanol from glucose is possible by the reduction in the production of ethanol co-products, especially biomass. We have developed a method to reduce biomass accumulation of Saccharomyces cerevisiae by the manipulation of the intracellular ATP level due to overexpression of genes of alkaline phosphatase, apyrase or enzymes involved in futile cycles. The strains constructed accumulated up to 10% more ethanol on a cornmeal hydrolysate medium. Similar increase in ethanol accumulation was observed in the mutants resistant to the toxic inhibitors of glycolysis like 3-bromopyruvate and others. Substantial increase in fuel ethanol production will be obtained by the development of new strains of yeasts that ferment sugars of the abundant lignocellulosic feedstocks, especially xylose, a pentose sugar. We have found that xylose can be fermented under elevated temperatures by the thermotolerant yeast, Hansenula polymorpha. We combined protein engineering of the gene coding for xylose reductase (XYL1) along with overexpression of the other two genes responsible for xylose metabolism in yeast (XYL2, XYL3) and the deletion of the global transcriptional activator CAT8, with the selection of mutants defective in utilizing ethanol as a carbon source using the anticancer drug, 3-bromopyruvate. Resulted strains accumulated 20-25 times more ethanol from xylose at the elevated temperature of 45°C with up to 12.5 g L(-1) produced. Increase in ethanol yield and productivity from xylose was also achieved by overexpression of genes coding for the peroxisomal enzymes: transketolase (DAS1) and transaldolase (TAL2), and deletion of the ATG13 gene. PMID:26619255

  9. The truncated Newton using 1st and 2nd order adjoint-state method: a new approach for traveltime tomography without rays

    NASA Astrophysics Data System (ADS)

    Bretaudeau, F.; Metivier, L.; Brossier, R.; Virieux, J.

    2013-12-01

    named as the truncated Newton (TCN) (Métivier et al. 2012) with a more accurate estimation of the impact of the Hessian. We propose an efficient implementation for first-arrival traveltime tomography. In TCN, the model update Δm is obtained through the iterative resolution of the Newton linear system H Δm = - g. Based on a matrix-free conjugate gradient resolution, the iterative solver requires only the computation of the gradient and of Hessian-vector products. We propose a generalization of the computation of the gradient using the adjoint-state method that allows to consider receivers located anywhere. Then the Hessian-vector products are computed using an original formulation based on a 2nd-order adjoint-state method, at the cost of an additional forward modeling. The TCN algorithm is composed of two nested loops: an internal loop to compute Δm, and an external loop where a line search is performed to update the subsurface parameters. TCN thus considers locally the inversion of the traveltime data using an estimation of the full Hessian (both 1st and 2nd order terms) at an acceptable cost. Tomography with TCN is an improvement over the simple gradient-based adjoint-state tomography due to its good convergence property, to the better consideration of illumination, and is a promising tool for multi-parameter inversion as rescaling is given by the Hessian.

  10. 2014 Female Athlete Triad Coalition Consensus Statement on Treatment and Return to Play of the Female Athlete Triad: 1st International Conference held in San Francisco, California, May 2012 and 2nd International Conference held in Indianapolis, Indiana, May 2013.

    PubMed

    De Souza, Mary Jane; Nattiv, Aurelia; Joy, Elizabeth; Misra, Madhusmita; Williams, Nancy I; Mallinson, Rebecca J; Gibbs, Jenna C; Olmsted, Marion; Goolsby, Marci; Matheson, Gordon

    2014-02-01

    The Female Athlete Triad is a medical condition often observed in physically active girls and women, and involves three components: (1) low energy availability with or without disordered eating, (2) menstrual dysfunction and (3) low bone mineral density. Female athletes often present with one or more of the three Triad components, and an early intervention is essential to prevent its progression to serious endpoints that include clinical eating disorders, amenorrhoea and osteoporosis. This consensus statement represents a set of recommendations developed following the 1st (San Francisco, California, USA) and 2nd (Indianapolis, Indiana, USA) International Symposia on the Female Athlete Triad. It is intended to provide clinical guidelines for physicians, athletic trainers and other healthcare providers for the screening, diagnosis and treatment of the Female Athlete Triad and to provide clear recommendations for return to play. The 2014 Female Athlete Triad Coalition Consensus Statement on Treatment and Return to Play of the Female Athlete Triad expert panel has proposed a risk stratification point system that takes into account magnitude of risk to assist the physician in decision-making regarding sport participation, clearance and return to play. Guidelines are offered for clearance categories, management by a multidisciplinary team and implementation of treatment contracts. This consensus paper has been endorsed by the Female Athlete Triad Coalition, an International Consortium of leading Triad researchers, physicians and other healthcare professionals, the American College of Sports Medicine and the American Medical Society for Sports Medicine. PMID:24463911

  11. 7. Photographic copy of original construction drawing, ELECTRICAL 1ST AND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    7. Photographic copy of original construction drawing, ELECTRICAL 1ST AND 2ND FLOOR PLANS, SHEET 10 of 11, DRAWING NO. 35-03-05 SF 5/1677, U.S. Army Engineer District, Detroit, Corps of Engineers, 9 June, 1959, on file Selfridge Base Museum. - Selfridge Field, Building No. 1041, West of E Street, north of D Street, Mount Clemens, Macomb County, MI

  12. Rubber Flooring Impact on Health of Dairy Cows

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Use of rubber flooring in dairies has become popular because of perceived cow comfort. The objective of this longitudinal study was to evaluate locomotion, health, production, and immunity over the first 180d of each of the 1st and 2nd lactations of cows assigned to free-stall housing with either r...

  13. Temporary anti-cancer & anti-pain effects of mechanical stimulation of any one of 3 front teeth (1st incisor, 2nd incisor, & canine) of right & left side of upper & lower jaws and their possible mechanism, & relatively long term disappearance of pain & cancer parameters by one optimal dose of DHEA, Astragalus, Boswellia Serrata, often with press needle stimulation of True ST. 36.

    PubMed

    Omura, Yoshiaki; Horiuchi, Nobuko; Jones, Marilyn K; Lu, Dominic P; Shimotsuura, Yasuhiro; Duvvi, Harsha; Pallos, Andrew; Ohki, Motomu; Suetsugu, Akihiro

    2009-01-01

    One minute downward pressure on the tip of any one of the front 3 teeth (1st incisor, 2nd incisor, and canine) at the right and left sides of the upper and lower jaw by a wooden toothpick induced temporary disappearance (20 min approximately 4 hours) of abnormally increased pain parameters (pain grading, Substance P, & TXB2), and cancer parameters (Telomere, Integrin alpha5beta1, Oncogene C-fos Ab2, etc. of Astrocytoma, Glioblastoma, squamous cell carcinoma of esophagus, adenocarcinoma of lung, breast cancer, adenocarcinoma of colon, prostate cancer). The effect included temporary disappearance of headache, toothache, chest and abdominal pain, and backache, often with improved memory & concentration. Since these beneficial changes resembled the effects of giving one optimal dose of DHEA, increase of DHEA was measured. Above mechanical stimulation of one of these front teeth increased abnormally reduced DHEA levels of less than 10 ng to norm1 100 approximately 130 ng BDORT units and normal cell (NC) telomeres from markedly reduced values to near normal values, and improved acetylcholine in the Hippocampus. Large organ representation areas for the Adrenal gland & Hippocampus may exist at these front teeth. This method can be used for emergency pain control and can explain the beneficial effect of bruxism and tooth brushing, through the increase of DHEA levels and activities of the Hippocampus by increasing Acetylcholine. Increasing NC telomere to optimally high level resulted in disappearance of pain and improvement or significant reduction of malignant tumor. Repeated daily press needle stimulation of True ST. 36 increased NC telomere 450-700 ng BDORT units. One optimal dose of DHEA increased NC telomere 525 ng DBORT units and eliminated the pain and abnormally increased cancer parameters; effect of one optimal dose lasted 0.5-11 months. One optimal dose of Boswellia Serrata or Astragalus not only increased NC telomere 650 ng BDORT units, eliminating pain and cancer

  14. Highlights of the 2 nd Bioinformatics Student Symposium by ISCB RSG-UK

    PubMed Central

    White, Benjamen; Fatima, Vayani; Fatima, Nazeefa; Das, Sayoni; Rahman, Farzana; Hassan, Mehedi

    2016-01-01

    Following the success of the 1 st Student Symposium by ISCB RSG-UK, a 2 nd Student Symposium took place on 7 th October 2015 at The Genome Analysis Centre, Norwich, UK. This short report summarizes the main highlights from the 2 nd Bioinformatics Student Symposium. PMID:27239284

  15. 19. Detail of brick courses 116, back side, between 1st ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    19. Detail of brick courses 1-16, back side, between 1st and 2nd windows from the right - Oklahoma State University, Boys Dormitory, Northwest corner of Hester Street & Athletic Avenue, Stillwater, Payne County, OK

  16. 20. Detail of brick courses 4675, back side, between 1st ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    20. Detail of brick courses 46-75, back side, between 1st and 2nd windows from the right - Oklahoma State University, Boys Dormitory, Northwest corner of Hester Street & Athletic Avenue, Stillwater, Payne County, OK

  17. The transient nature of 2nd-order stereopsis.

    PubMed

    Hess, Robert F; Wilcox, Laurie M

    2008-05-01

    There are currently two competing dichotomies used to describe how local stereoscopic information is processed by the human visual system. The first is in terms of the type of the spatial filtering operations used to extract relevant image features prior to stereoscopic analysis (i.e. 1st- vs 2nd-order stereo; [Hess, R. F., & Wilcox, L. M. (1994). Linear and non-linear filtering in stereopsis. Vision Research, 34, 2431-2438]). The second is in terms of the temporal properties of the mechanisms used to process stereoscopic information (i.e. sustained vs transient stereo; [Schor, C. M., Edwards, M., & Pope, D. R. (1998). Spatial-frequency and contrast tuning of the transient-stereopsis system. Vision Research, 38(20), 3057-3068]). Here we compare the dynamics of 1st- and 2nd-order stereopsis using several types of stimuli and find a clear dissociation in which 1st-order stimuli exhibit sustained properties while 2nd-order patterns show more transient properties. Our results and analyses unify and simplify two complimentary bodies of work. PMID:18407312

  18. The transient nature of 2nd-order stereopsis.

    PubMed

    Hess, Robert F; Wilcox, Laurie M

    2008-05-01

    There are currently two competing dichotomies used to describe how local stereoscopic information is processed by the human visual system. The first is in terms of the type of the spatial filtering operations used to extract relevant image features prior to stereoscopic analysis (i.e. 1st- vs 2nd-order stereo; [Hess, R. F., & Wilcox, L. M. (1994). Linear and non-linear filtering in stereopsis. Vision Research, 34, 2431-2438]). The second is in terms of the temporal properties of the mechanisms used to process stereoscopic information (i.e. sustained vs transient stereo; [Schor, C. M., Edwards, M., & Pope, D. R. (1998). Spatial-frequency and contrast tuning of the transient-stereopsis system. Vision Research, 38(20), 3057-3068]). Here we compare the dynamics of 1st- and 2nd-order stereopsis using several types of stimuli and find a clear dissociation in which 1st-order stimuli exhibit sustained properties while 2nd-order patterns show more transient properties. Our results and analyses unify and simplify two complimentary bodies of work.

  19. 2nd Generation ELT Performance Specification Development

    NASA Technical Reports Server (NTRS)

    Stimson, Chad M.

    2015-01-01

    NASA Search And Rescue is supporting RTCA SC-229 with research and recommendations for performance specifications for the 2nd generation of emergency locator transmitters. Areas for improvement and methods for collecting data will be presented.

  20. [Microsurgical 2nd toe transfer for catastrophic hand reconstruction].

    PubMed

    Placer, A; Lozano, Ja

    2007-01-01

    The correct reconstruction of the catastrophic hand requires complex surgical techniques. The microsurgical transference of a toe is indicated when all other reconstructive options are shown to be useless for the reconstruction of the required clamp function. In this clinical note we set out the case of a 32 year old man, who came to our accident and emergency department after suffering a traffic accident. After exploration the diagnosis was that of catastrophic left hand, among other policontusions. Urgent surgery was carried out, saving the maximum possible viable structures. The immediate result of this surgery was a hand with 1st, 4th and 5th functional fingers. As the essential clamp function between the 1st and 4th or 5th fingers was not totally satisfactory, we decided to reconstruct the 3rd finger of his hand with his ipsilateral 2nd toe. All pertinent studies to determine vascularisation of the flap were carried out in planning the surgery, and the microsurgical transfer was then realized, which was successful. Today, after a suitable rehabilitation, the patient has recovered a satisfactory function of heavy and fine clamp in the operated hand. Toe to hand transfer is a good option for finger reconstruction and its function. Rehabilitation is the key to functional recovery.

  1. Refraction data survey: 2nd generation correlation of myopia.

    PubMed

    Greene, Peter R; Medina, Antonio

    2016-10-01

    The objective herein is to provide refraction data, myopia progression rate, prevalence, and 1st and 2nd generation correlations, relevant to whether myopia is random or inherited. First- and second-generation ocular refraction data are assembled from N = 34 families, average of 2.8 children per family. From this group, data are available from N = 165 subjects. Inter-generation regressions are performed on all the data sets, including correlation coefficient r, and myopia prevalence [%]. Prevalence of myopia is [M] = 38.5 %. Prevalence of high myopes with |R| >6 D is [M-] = 20.5 %. Average refraction is  = -1.84 D ± 3.22 (N = 165). For the high myopes, |R| >6 D, prevalence for the parents is [M-] = 25 %, for the 2nd generation [M-] = 16.5 %. Average myopia level for the high myopes, both generations, is  = -7.52 D ± 1.31 D (N = 33). Regression parameters are calculated for all the data sets, yielding correlation coefficients in the range r = 0.48-0.72 for some groups of myopes and high myopes, fathers to daughters, and mothers to sons. Also of interest, some categories show essentially no correlation, -0.20 < r < 0.20, indicating that the refractive errors occur randomly. Time series results show myopia diopter rates = -0.50 D/year.

  2. PIRLS 2016 Assessment Framework. 2nd Edition

    ERIC Educational Resources Information Center

    Mullis, Ina V. S., Ed.; Martin, Michael O., Ed.

    2015-01-01

    The "PIRLS 2016 Assessment Framework, 2nd Edition" provides the foundation for the three international assessments planned as part of the International Association for the Evaluation of Educational Achievement's Progress in International Reading Literacy Study (PIRLS) 2016: PIRLS, PIRLS Literacy, and ePIRLS. PIRLS represents the…

  3. 2nd PEGS Annual Symposium on Antibodies for Cancer Therapy

    PubMed Central

    Ho, Mitchell; Royston, Ivor; Beck, Alain

    2012-01-01

    The 2nd Annual Antibodies for Cancer Therapy symposium, organized again by Cambridge Healthtech Institute as part of the Protein Engineering Summit, was held in Boston, USA from April 30th to May 1st, 2012. Since the approval of the first cancer antibody therapeutic, rituximab, fifteen years ago, eleven have been approved for cancer therapy, although one, gemtuzumab ozogamicin, was withdrawn from the market.  The first day of the symposium started with a historical review of early work for lymphomas and leukemias and the evolution from murine to human antibodies. The symposium discussed the current status and future perspectives of therapeutic antibodies in the biology of immunoglobulin, emerging research on biosimilars and biobetters, and engineering bispecific antibodies and antibody-drug conjugates. The tumor penetration session was focused on the understanding of antibody therapy using ex vivo tumor spheroids and the development of novel agents targeting epithelial junctions in solid tumors. The second day of the symposium discussed the development of new generation recombinant immunotoxins with low immunogenicity, construction of chimeric antigen receptors, and the proof-of-concept of ‘photoimmunotherapy’. The preclinical and clinical session presented antibodies targeting Notch signaling and chemokine receptors.  Finally, the symposium discussed emerging technologies and platforms for therapeutic antibody discovery. PMID:22864478

  4. Requirement of copper for 1st-log growth of the yeast Saccharomyces cerevisiae

    SciTech Connect

    Como, S.A.; Valerio, V.; Nickless, S.; Connelly, J.L.

    1986-05-01

    Routine evaluation of the role of copper (Cu) in the growth of various mutants of the yeast Saccharomyces Cerevisiae disclosed an unexpected effect of Cu on the fermentative first-log growth. The authors subsequent studies are attempting to ascertain the nature and significance of this observation. Cells are grown on glucose in a supplemented minimal media at 29/sup 0/C for 48-72 hrs. using New Brunswick incubator shaking at 200 rpm. Cu concentration was varied by addition of Cu salts or bathocuproine disulfonate (BC), a highly specific Cu chelator. Samples were removed periodically from flasks and dry weights were determined. Growth curve plots of normal yeasts grown in the presence of 1mM to 38mM Cu showed little variation in the expected 1st log; diauxi; 2nd log; stationary phase picture. However, in the presence of BC growth rate in the 1st log was significantly slowed and as expected 2nd log growth was essentially stopped. The low 1st log growth rate could be titrated to normal (+Cu) levels by increments of added Cu but not by added iron. The effect was not seen when Rho-minus strains were used nor when growth was followed under anaerobic conditions. Results to date implicate a mitochondrial protein, oxygen and copper in the 1st log growth of S Cerevisiae. The character of the protein agent and the possible contribution of cytochrome oxidase activity to the lst log growth are being evaluated.

  5. 2nd & 3rd Generation Vehicle Subsystems

    NASA Technical Reports Server (NTRS)

    2000-01-01

    This paper contains viewgraph presentation on the "2nd & 3rd Generation Vehicle Subsystems" project. The objective behind this project is to design, develop and test advanced avionics, power systems, power control and distribution components and subsystems for insertion into a highly reliable and low-cost system for a Reusable Launch Vehicles (RLV). The project is divided into two sections: 3rd Generation Vehicle Subsystems and 2nd Generation Vehicle Subsystems. The following topics are discussed under the first section, 3rd Generation Vehicle Subsystems: supporting the NASA RLV program; high-performance guidance & control adaptation for future RLVs; Evolvable Hardware (EHW) for 3rd generation avionics description; Scaleable, Fault-tolerant Intelligent Network or X(trans)ducers (SFINIX); advance electric actuation devices and subsystem technology; hybrid power sources and regeneration technology for electric actuators; and intelligent internal thermal control. Topics discussed in the 2nd Generation Vehicle Subsystems program include: design, development and test of a robust, low-maintenance avionics with no active cooling requirements and autonomous rendezvous and docking systems; design and development of a low maintenance, high reliability, intelligent power systems (fuel cells and battery); and design of a low cost, low maintenance high horsepower actuation systems (actuators).

  6. Dynamics of the properties of steppe paleosols of the Sarmatian time (2nd century BC-4th century AD) in relation to secular variations in climatic humidity

    NASA Astrophysics Data System (ADS)

    Demkin, V. A.; Zolotareva, B. N.; Demkina, T. S.; Khomutova, T. E.; Kashirskaya, N. N.; El'Tsov, M. V.; Udal'Tsov, S. N.

    2012-02-01

    Paleosols buried under kurgans of the Early (2nd-1st centuries BC), Middle (1st-2nd centuries AD) and Late (2nd-IV centuries AD) Sarmatian epochs were studied in dry steppes and desert steppes of the Lower Volga region (the Privolzhskaya and Ergeni Uplands and the Caspian Lowland). It was found that temporal variations in the morphological, chemical, microbiological, and magnetic properties of the paleosols in the interval of 2200-1600 BP were characterized by the cyclic pattern related to secular dynamics of climatic humidity with changes in the mean annual precipitation of ±30-50 mm. These climate changes did not transform chestnut paleosols and paleosolonetzes at the type or subtype taxonomic levels. However, they led to certain changes in the humus, carbonate, and salt profiles of the soils; in the character of solonetzic horizon B1; and in the state of microbial communities. According to these data, the Sarmatian time was characterized by alternation of micropluvial and microarid stages lasting fro about 100-200 years. In particular, the stages of humidization were observed in the 1st century BC-1st century AD and in the 4th century AD; the most arid conditions were observed in the second half of the 2nd and the first half of the 3rd century AD.

  7. Overview of the 2nd Gen 3.7m HIAD Static Load Test

    NASA Technical Reports Server (NTRS)

    Swanson, G. T.; Kazemba, C. D.; Johnson, R. K.; Hughes, S. J.; Calomino, A. M.; Cheatwood, F. M.; Cassell, A. M.; Anderson, P.; Lowery, A.

    2015-01-01

    To support NASAs long term goal of landing humans on Mars, technologies which enable the landing of heavy payloads are being developed. Current entry, decent, and landing technologies are not practical for human class payloads due to geometric constraints dictated by current launch vehicle fairing limitations. Therefore, past and present technologies are now being explored to provide a mass and volume efficient solution to atmospheric entry, including Hypersonic Inflatable Aerodynamic Decelerators (HIADs). In October of 2014, a 3.7m HIAD inflatable structure with an integrated flexible thermal protection sys-tem (F-TPS) was subjected to a static load test series to verify the designs structural performance. The 3.7m HIAD structure was constructed in a 70 deg sphere-cone stacked-toroid configuration using eight inflatable tori, which were joined together using adhesives and high strength textile webbing to help distribute the loads throughout the inflatable structure. The inflatable structure was fabricated using 2nd generation structural materials that permit an increase in use temperature to 400 C+ as compared to the 250 C limitation of the 1st generation materials. In addition to the temperature benefit, these materials also offer a 40 reduction in structure mass. The 3.7m F-TPS was fabricated using high performance materials to protect the inflatable structure from heat loads that would be seen during atmospheric entry. The F-TPS was constructed of 2nd generation TPS materials increasing its heating capability from 35W sq cm to over 100W sq cm. This test article is the first stacked-torus HIAD to be fabricated and tested with a 70 deg sphere-cone. All previous stacked-torus HIADs have employed a 60o sphere-cone. To perform the static load test series, a custom test fixture was constructed. The fixture consisted of a structural tub rim with enough height to allow for dis-placement of the inflatable structure as loads were applied. The tub rim was attached to the

  8. Proceedings of Seminar on UDC and Mechanized Information Systems (2nd, Frankfurt, 1st-5th June 1970).

    ERIC Educational Resources Information Center

    Molgaard-Hansen, R., Ed.; Westring-Nielsen, Margit, Ed.

    The 20 papers included in this report are arranged in five parts: (1) Opening addresses, (2) Universal Decimal Classification (UDC) in computer-prepared catalogues, (3) UDC in SDI/IR systems and compatability with thesauri, (4) UDC in future information systems and networks and (5) seminar organization. English abstracts are provided for those…

  9. Superacid Catalyzed Coal Conversion Chemistry. 1st and 2nd Quarterly Technical Progress Reports, September 1, 1983-March 30, 1984.

    DOE R&D Accomplishments Database

    Olah, G. A.

    1984-01-01

    In our laboratories we have previously developed a mild coal conversion process. This involves the use of a superacid system consisting of HF and BF{sub 3} in presence of hydrogen and/or a hydrogen donor solvent. In order to understand the chemistry involved in the process of depolymerization of coal by the HF:BF{sub 3}:H{sub 2} system we are carrying out a systematic study of a number of coal model compounds. The model compounds selected for present study have two benzene rings connected with various bridging units such as alkylidene, ether, sulfide etc. From studies so far carried out it appears that high pyridine extractibilities achieved by treating coal at temperature below 100 degrees C results from the cleavage of bridges such as present in bibenzyl, diphenyl methane, dibenzyl ether, dibenzyl sulfide etc. On the other hand the increased cyclohexane extractibility and distillability observed at relatively higher temperatures and hydrogen pressures reflects the hydrogenation and cleavage of the aromatic backbone in coal structure similar to what is seen in the conversion of model compounds such as biphenyl, diphenyl ether, diphenyl sulfide, anthracene, etc.

  10. 2nd International Planetary Probe Workshop

    NASA Technical Reports Server (NTRS)

    Venkatapathy, Ethiraj; Martinez, Ed; Arcadi, Marla

    2005-01-01

    Included are presentations from the 2nd International Planetary Probe Workshop. The purpose of the second workshop was to continue to unite the community of planetary scientists, spacecraft engineers and mission designers and planners; whose expertise, experience and interests are in the areas of entry probe trajectory and attitude determination, and the aerodynamics/aerothermodynamics of planetary entry vehicles. Mars lander missions and the first probe mission to Titan made 2004 an exciting year for planetary exploration. The Workshop addressed entry probe science, engineering challenges, mission design and instruments, along with the challenges of reconstruction of the entry, descent and landing or the aerocapture phases. Topics addressed included methods, technologies, and algorithms currently employed; techniques and results from the rich history of entry probe science such as PAET, Venera/Vega, Pioneer Venus, Viking, Galileo, Mars Pathfinder and Mars MER; upcoming missions such as the imminent entry of Huygens and future Mars entry probes; and new and novel instrumentation and methodologies.

  11. 2nd Generation RLV Risk Definition Program

    NASA Technical Reports Server (NTRS)

    Davis, Robert M.; Stucker, Mark (Technical Monitor)

    2000-01-01

    The 2nd Generation RLV Risk Reduction Mid-Term Report summarizes the status of Kelly Space & Technology's activities during the first two and one half months of the program. This report was presented to the cognoscente Contracting Officer's Technical Representative (COTR) and selected Marshall Space Flight Center staff members on 26 September 2000. The report has been approved and is distributed on CD-ROM (as a PowerPoint file) in accordance with the terms of the subject contract, and contains information and data addressing the following: (1) Launch services demand and requirements; (2) Architecture, alternatives, and requirements; (3) Costs, pricing, and business cases analysis; (4) Commercial financing requirements, plans, and strategy; (5) System engineering processes and derived requirements; and (6) RLV system trade studies and design analysis.

  12. 2nd Generation Reusable Launch Vehicle NASA Led Propulsion Tasks

    NASA Technical Reports Server (NTRS)

    Richards, Steve

    2000-01-01

    Design, development and test of a 2nd generation Reusable Launch Vehicle (RLV) is presented. This current paper discusses the following: 2nd Generation RLV Propulsion Project, Overview of NASA Led Tasks in Propulsion, Gen2 Turbo Machinery Technology Demonstrator, and Combustion Devices Test Bed, GRCop-84 Sheet For Combustion Chambers, Nozzles and Large Actively Cooled Structures

  13. "Hard Science" for Gifted 1st Graders

    ERIC Educational Resources Information Center

    DeGennaro, April

    2006-01-01

    "Hard Science" is designed to teach 1st grade gifted students accurate and high level science concepts. It is based upon their experience of the world and attempts to build a foundation for continued love and enjoyment of science. "Hard Science" provides field experiences and opportunities for hands-on discovery working beside experts in the field…

  14. Collaborative study for the establishment of the 2(nd) International Standard for Bleomycin Complex A2/B2.

    PubMed

    Jorajuria, S; Raphalen, C; Dujardin, V; Daas, A

    2015-01-01

    Organization (WHO) International Standard (IS) for bleomycin complex A2/B2. Eight laboratories from different countries participated. Potencies of the candidate material were estimated by microbiological assays with sensitive micro-organisms. To ensure continuity between consecutive batches, the 1(st) IS for bleomycin complex A2/B2 was used as a reference. Based on the results of the study, the 2(nd) IS for bleomycin complex A2/B2 was adopted at the meeting of the WHO Expert Committee for Biological Standardization (ECBS) in 2014 with an assigned potency of 12 500 International Units (IU) per vial. The 2(nd) IS for bleomycin complex A2/B2 is available from the European Directorate for the Quality of Medicines & HealthCare (EDQM).

  15. Improvement of a plasma uniformity of the 2nd ion source of KSTAR neutral beam injector

    NASA Astrophysics Data System (ADS)

    Jeong, S. H.; Kim, T. S.; Lee, K. W.; Chang, D. H.; In, S. R.; Bae, Y. S.

    2014-02-01

    The 2nd ion source of KSTAR (Korea Superconducting Tokamak Advanced Research) NBI (Neutral Beam Injector) had been developed and operated since last year. A calorimetric analysis revealed that the heat load of the back plate of the ion source is relatively higher than that of the 1st ion source of KSTAR NBI. The spatial plasma uniformity of the ion source is not good. Therefore, we intended to identify factors affecting the uniformity of a plasma density and improve it. We estimated the effects of a direction of filament current and a magnetic field configuration of the plasma generator on the plasma uniformity. We also verified that the operation conditions of an ion source could change a uniformity of the plasma density of an ion source.

  16. Improvement of a plasma uniformity of the 2nd ion source of KSTAR neutral beam injector

    SciTech Connect

    Jeong, S. H. Kim, T. S.; Lee, K. W.; Chang, D. H.; In, S. R.; Bae, Y. S.

    2014-02-15

    The 2nd ion source of KSTAR (Korea Superconducting Tokamak Advanced Research) NBI (Neutral Beam Injector) had been developed and operated since last year. A calorimetric analysis revealed that the heat load of the back plate of the ion source is relatively higher than that of the 1st ion source of KSTAR NBI. The spatial plasma uniformity of the ion source is not good. Therefore, we intended to identify factors affecting the uniformity of a plasma density and improve it. We estimated the effects of a direction of filament current and a magnetic field configuration of the plasma generator on the plasma uniformity. We also verified that the operation conditions of an ion source could change a uniformity of the plasma density of an ion source.

  17. Improvement of a plasma uniformity of the 2nd ion source of KSTAR neutral beam injector.

    PubMed

    Jeong, S H; Kim, T S; Lee, K W; Chang, D H; In, S R; Bae, Y S

    2014-02-01

    The 2nd ion source of KSTAR (Korea Superconducting Tokamak Advanced Research) NBI (Neutral Beam Injector) had been developed and operated since last year. A calorimetric analysis revealed that the heat load of the back plate of the ion source is relatively higher than that of the 1st ion source of KSTAR NBI. The spatial plasma uniformity of the ion source is not good. Therefore, we intended to identify factors affecting the uniformity of a plasma density and improve it. We estimated the effects of a direction of filament current and a magnetic field configuration of the plasma generator on the plasma uniformity. We also verified that the operation conditions of an ion source could change a uniformity of the plasma density of an ion source. PMID:24593593

  18. [In search of the ideal surgical treatment for lymphedema. Report of 2nd European Conference on supermicrosurgery (Barcelona - March 2012)].

    PubMed

    Rausky, J; Robert, N; Binder, J-P; Revol, M

    2012-12-01

    Since more than 50 years, many surgeons all around the world try to find the perfect surgical technique to treat limb lymphedemas. Decongestive physiotherapy associated with the use of a compressive garment has been the primary choice for lymphedema treatment. Many different surgical techniques have been developed, however, to date, there is no consensus on surgical procedure. Most surgical experts of lymphedema met in the second European Conference on supermicrosurgery, organized on March 1st and 2nd 2012, in San Pau Hospital, Barcelona. Together they tried to clarify these different options and ideally a strategy for using these techniques.

  19. Florida Investigates 2nd Possible Local Transmission of Zika Virus

    MedlinePlus

    ... html Florida Investigates 2nd Possible Local Transmission of Zika Virus If confirmed, cases would be first instances ... investigating a second possible case of locally transmitted Zika infection. On Tuesday, the first possible case of ...

  20. 2nd Antibiotic Halves C-Section Infection Rate

    MedlinePlus

    ... gov/news/fullstory_161230.html 2nd Antibiotic Halves C-Section Infection Rate: Study Two medications are better ... delivery, Andrews said. Overall, about 12 percent of C-sections result in an infection, according to background ...

  1. 16. 3RD FLOOR, J.M. LEHMANN CO. FIVEROLL TOILET SOAP MILL ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    16. 3RD FLOOR, J.M. LEHMANN CO. FIVE-ROLL TOILET SOAP MILL INSTALLED 1950, TO WEST; BUCKET CONVEYOR AT RIGHT MOVED WASTE FROM 2ND FLOOR SOAP PRESSES TO 5TH FLOOR RE-MANUFACTURE - Colgate & Company Jersey City Plant, Building No. B-14, 54-58 Grand Street, Jersey City, Hudson County, NJ

  2. Lock No. 1 St. Lucie Canal. Sector gates, internal struts ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Lock No. 1- St. Lucie Canal. Sector gates, internal struts- nose beams. - St. Lucie Canal, St. Lucie Lock No. 1, St. Lucie, Cross State Canal, Okeechobee Intracoastal Waterway, Stuart, Martin County, FL

  3. A Handbook for Classroom Instruction That Works, 2nd Edition

    ERIC Educational Resources Information Center

    Association for Supervision and Curriculum Development, 2012

    2012-01-01

    Perfect for self-help and professional learning communities, this handbook makes it much easier to apply the teaching practices from the ASCD-McREL best-seller "Classroom Instruction That Works: Research-Based Strategies for Increasing Student Achievement, 2nd Edition." The authors take you through the refined Instructional Planning Guide, so you…

  4. Test Review: The Profile of Mood States 2nd Edition

    ERIC Educational Resources Information Center

    Lin, Shuqiong; Hsiao, Yu-Yu; Wang, Miao

    2014-01-01

    The "Profile of Mood States 2nd Edition" (POMS 2) was published in 2012 by Multi-Health Systems (MHS) to assess transient feelings and mood among individuals aged 13 years and above. Evolving from the original POMS (McNair, Lorr, & Droppleman, 1971, 1992), the POMS 2 was designed for youth (13-17 years old) and adults (18 years old…

  5. Book Review: Bioassays with Arthropods: 2nd Edition

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The technical book "Bioassays with Arthropods: 2nd Edition" (2007. Jacqueline L. Robertson, Robert M. Russell, Haiganoush K, Preisler and N. E. Nevin, Eds. CRC Press, Boca Raton, FL, 224 pp.) was reviewed for the scientific readership of the peer-reviewed publication Journal of Economic Entomology. ...

  6. TIFS/FL5 - 2nd Asheville deployment

    NASA Technical Reports Server (NTRS)

    1999-01-01

    TIFS/FL5 - 2nd Asheville deployment. People in photograph include: Charlie Peacock, Randy Bailey, Paul Deppe, Mike Reagan, Mike Norman, Rob Rivera, Paul Schifferle, Russ Parrish, Trey Auther, Lou Glaab, Dave McLuer, Mike Parrag, and Lynda Kramer.

  7. Third Floor Plan, Second Floor Plan, First Floor Plan, Ground ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Third Floor Plan, Second Floor Plan, First Floor Plan, Ground Floor Plan, West Bunkhouse - Kennecott Copper Corporation, On Copper River & Northwestern Railroad, Kennicott, Valdez-Cordova Census Area, AK

  8. PF-06463922, an ALK/ROS1 inhibitor, overcomes resistance to 1st and 2nd generation ALK inhibitors in pre-clinical models

    PubMed Central

    Zou, Helen Y.; Friboulet, Luc; Kodack, David P.; Engstrom, Lars D.; Li, Qiuhua; West, Melissa; Tang, Ruth W.; Wang, Hui; Tsaparikos, Konstantinos; Wang, Jinwei; Timofeevski, Sergei; Katayama, Ryohei; Dinh, Dac M.; Lam, Hieu; Lam, Justine L.; Yamazaki, Shinji; Hu, Wenyue; Patel, Bhushankumar; Bezwada, Divya; Frias, Rosa L.; Lifshits, Eugene; Mahmood, Sidra; Gainor, Justin F.; Affolter, Timothy; Lappin, Patrick B.; Gukasyan, Hovhannes; Lee, Nathan; Deng, Shibing; Jain, Rakesh K; Johnson, Ted W.; Shaw, Alice T.; Fantin, Valeria R.; Smeal, Tod

    2015-01-01

    SUMMARY We report the preclinical evaluation of PF-06463922, a potent and brain penetrant ALK/ROS1 inhibitor. Compared to other clinically available ALK inhibitors, PF-06463922 displayed superior potency against all known clinically acquired ALK mutations, including the highly resistant G1202R mutant. Furthermore, PF-06463922 treatment led to regression of EML4-ALK driven brain metastases, leading to prolonged mouse survival, in a superior manner. Finally, PF-06463922 demonstrated high selectivity and safety margins in a variety of preclinical studies. These results suggest that PF-06463922 will be highly effective for the treatment of patients with ALK-driven lung cancers, including those who relapsed on clinically available ALK inhibitors due to secondary ALK kinase domain mutations and/or due to the failed control of brain metastases. PMID:26144315

  9. Method and system for knowledge discovery using non-linear statistical analysis and a 1st and 2nd tier computer program

    DOEpatents

    Hively, Lee M.

    2011-07-12

    The invention relates to a method and apparatus for simultaneously processing different sources of test data into informational data and then processing different categories of informational data into knowledge-based data. The knowledge-based data can then be communicated between nodes in a system of multiple computers according to rules for a type of complex, hierarchical computer system modeled on a human brain.

  10. 1st, 2nd and 3rd Generation Implementations of an eLearning Design: Re-Use from Postgraduate Law to Block/Online Engineering Course

    ERIC Educational Resources Information Center

    Lambert, Sarah; Brewer, Chris

    2007-01-01

    In order to meet the demands of postgraduate students who were time poor and unable to regularly attend face-to-face classes, one lecturer in the Faculty Law at the University of Wollongong (UOW) sought the assistance of a Learning Designer to redesign the Postgraduate Practical Legal Training (PLT) program into a flexible blended learning format,…

  11. Longitudinal Prediction of 1st and 2nd Grade English Oral Reading Fluency in English Language Learners: Which Early Reading and Language Skills Are Better Predictors?

    ERIC Educational Resources Information Center

    Solari, Emily J.; Aceves, Terese C.; Higareda, Ignacio; Richards-Tutor, Cara; Filippini, Alexis L.; Gerber, Michael M.; Leafstedt, Jill

    2014-01-01

    This study investigates the relation between Spanish and English early literacy skills in kindergarten and first grade, and English oral reading fluency at the end of first and second grade in a sample of 150 Spanish-speaking English language learners. Students were assessed in kindergarten, first, and second grades on a broad bilingual academic…

  12. Nonlinear random motion analysis of coupled heave-pitch motions of a spar platform considering 1st-order and 2nd-order wave loads

    NASA Astrophysics Data System (ADS)

    Liu, Shuxiao; Tang, Yougang; Li, Wei

    2016-06-01

    In this study, we consider first- and second-order random wave loads and the effects of time-varying displacement volume and transient wave elevation to establish motion equations of the Spar platform's coupled heave-pitch. We generated random wave loads based on frequency-domain wave load transfer functions and the Joint North Sea Wave Project (JONSWAP) wave spectrum, designed program codes to solve the motion equations, and then simulated the coupled heave-pitch motion responses of the platform in the time domain. We then calculated and compared the motion responses in different sea conditions and separately investigated the effects of second-order random wave loads and transient wave elevation. The results show that the coupled heave-pitch motion responses of the platform are primarily dominated by wave height and the characteristic wave period, the latter of which has a greater impact. Second-order mean wave loads mainly affect the average heave value. The platform's pitch increases after the second-order low frequency wave loads are taken into account. The platform's heave is underestimated if the transient wave elevation term in the motion equations is neglected.

  13. The 1982 NASA/ASEE summer faculty fellowship research program, abstracts of research projects, 1st and 2nd-year fellows

    NASA Technical Reports Server (NTRS)

    1982-01-01

    Phosphine photolysis in Jupiter's atmosphere is discussed in relation to organic chemical evolution. Workload in AFTI F-16 test flights, infrared observations of M17, and the relation between rock and vegetation types are presented. Orbiter transfer vehicle aerothermodynamics simulation problems are also discussed.

  14. Two 2nd Circuit decisions represent mixed bag on insurance.

    PubMed

    2000-01-21

    The 2nd U.S. Circuit Court of Appeals in New York issued two important rulings within a week on the extent to which the Americans with Disabilities Act (ADA) regulates insurance practices. [Name removed] v. Allstate Life Insurance Co. was a plaintiff-friendly decision, finding that the insurance company illegally refused to sell life insurance to a married couple because of their mental disability, major depression. [Name removed]. v. Israel Discount Bank of New York was more defendant friendly and tackled the issue of whether the ADA permits different benefit caps for mental and physical disabilities. PMID:11367226

  15. 2nd Generation RLV: Program Goals and Acquisition Strategy

    NASA Technical Reports Server (NTRS)

    Graham, J. Bart; Dumbacher, D. L. (Technical Monitor)

    2001-01-01

    The risk to loss of life for Space Shuttle crewmembers is approximately one in 245 missions. U.S. launch service providers captured nearly 100%, of the commercial launch market revenues in the mid 1980s. Today, the U.S. captures less than 50% of that market. A launch system architecture is needed that will dramatically increase the safety of space flight while significantly reducing the cost. NASA's Space Launch Initiative, which is implemented by the 2nd Generation RLV Program Office at Marshall Space Flight Center, seeks to develop technology and reusable launch vehicle concepts which satisfy the commercial launch market needs and the unique needs of NASA. Presented in this paper are the five primary elements of NASA's Integrated Space Transportation Plan along with the highest level goals and the acquisition strategy of the 2nd Generation RLV Program. Approval of the Space Launch Initiative FY01 budget of $290M is seen as a major commitment by the Agency and the Nation to realize the commercial potential that space offers and to move forward in the exploration of space.

  16. Conference report: 2nd Medicon Valley Inhalation Symposium.

    PubMed

    Lastow, Orest

    2014-02-01

    2nd Medicon Valley Inhalation Symposium 16 October 2013, Lund, Sweden The 2nd Medicon Valley Inhalation Symposium was arranged by the Medicon Valley Inhalation Consortium. It was held at the Medicon Village, which is the former AstraZeneca site in Lund, Sweden. It was a 1 day symposium focused on inhaled drug delivery and inhalation product development. 120 delegates listened to 11 speakers. The program was organized to follow the value chain of an inhalation product development. This year there was a focus on inhaled biomolecules. The inhaled delivery of insulin was covered by two presentations and a panel discussion. The future of inhaled drug delivery was discussed together with an overview of the current market situation. Two of the inhalation platforms, capsule inhalers and metered-dose inhalers, were discussed in terms of the present situation and the future opportunities. Much focus was on the regulatory and intellectual aspects of developing inhalation products. The manufacturing of a dry powder inhaler requires precision filling of powder, and the various techniques were presented. The benefits of nebulization and nasal delivery were illustrated with some case studies and examples. The eternal challenge of poor compliance was addressed from an industrial design perspective and some new approaches were introduced.

  17. EMSL Quarterly Highlights Report: 1st Quarter, FY08

    SciTech Connect

    Showalter, Mary Ann

    2008-01-28

    The EMSL Quarterly Highlights Report covers the science, staff and user recognition, and publication activities that occurred during the 1st quarter (October 2007 - December 2007) of Fiscal Year 2008.

  18. EMSL Quarterly Highlights Report: 1st Quarter, Fiscal Year 2009

    SciTech Connect

    Showalter, Mary Ann; Kathmann, Loel E.; Manke, Kristin L.

    2009-02-02

    The EMSL Quarterly Highlights Report covers the science, staff and user recognition, and publication activities that occurred during the 1st quarter (October 2008 - December 2008) of Fiscal Year 2009.

  19. ISS Update: 1st Annual ISS R&D Conference

    NASA Video Gallery

    NASA Public Affairs Officer Kelly Humphries talks by phone on Wednesday with Julie Robinson, ISS Program Scientist, about the 1st Annual International Space Station Research and Development Confere...

  20. 1st Baby Born with DNA from 3 Parents

    MedlinePlus

    ... news/fullstory_161176.html 1st Baby Born With DNA From 3 Parents Technique designed to help couples ... be born using a controversial technique that combines DNA from three people -- two women and a man. ...

  1. FDA OKs 1st Drug to Treat Duchenne Muscular Dystrophy

    MedlinePlus

    ... html FDA OKs 1st Drug to Treat Duchenne Muscular Dystrophy Exondys 51 seems to fill unmet need for ... the first drug for a rare form of muscular dystrophy. Exondys 51 (eteplirsen) was granted accelerated approval to ...

  2. Valley Floor

    NASA Technical Reports Server (NTRS)

    2003-01-01

    MGS MOC Release No. MOC2-529, 30 October 2003

    This Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image shows the floor of an ancient valley located near the Pyrrhae Chaos region of Mars. This valley might have been carved by liquid water, but today no evidence remains that a fluid ever flowed through it. Long after the valley formed, its floor was covered by large, windblown, ripple-like dunes. This picture is located near 13.0oS, 31.2oW. The image is illuminated by sunlight from the upper left and covers an area 3 km (1.9 mi) wide.

  3. 2nd International Conference on Health and Human Rights.

    PubMed

    Dougherty, S

    1997-01-01

    The 2nd International Conference on Health and Human Rights held in 1996 explored the issue of human rights and public health advocacy in light of the AIDS pandemic. Speakers addressed the pervasive personal and institutional racism within the United States (known as structural violence) that hinders minority health status and health care. Poverty and its relationship to women's risk of HIV infection are viewed as one of the most significant manifestations of structural violence for those in the field of HIV/AIDS. Other speakers addressed the destruction of urban habitats and the effect of this destruction on urban society and health, and how social class can affect health care delivery, access, and mortality.

  4. Super Boiler 2nd Generation Technology for Watertube Boilers

    SciTech Connect

    Mr. David Cygan; Dr. Joseph Rabovitser

    2012-03-31

    This report describes Phase I of a proposed two phase project to develop and demonstrate an advanced industrial watertube boiler system with the capability of reaching 94% (HHV) fuel-to-steam efficiency and emissions below 2 ppmv NOx, 2 ppmv CO, and 1 ppmv VOC on natural gas fuel. The boiler design would have the capability to produce >1500 F, >1500 psig superheated steam, burn multiple fuels, and will be 50% smaller/lighter than currently available watertube boilers of similar capacity. This project is built upon the successful Super Boiler project at GTI. In that project that employed a unique two-staged intercooled combustion system and an innovative heat recovery system to reduce NOx to below 5 ppmv and demonstrated fuel-to-steam efficiency of 94% (HHV). This project was carried out under the leadership of GTI with project partners Cleaver-Brooks, Inc., Nebraska Boiler, a Division of Cleaver-Brooks, and Media and Process Technology Inc., and project advisors Georgia Institute of Technology, Alstom Power Inc., Pacific Northwest National Laboratory and Oak Ridge National Laboratory. Phase I of efforts focused on developing 2nd generation boiler concepts and performance modeling; incorporating multi-fuel (natural gas and oil) capabilities; assessing heat recovery, heat transfer and steam superheating approaches; and developing the overall conceptual engineering boiler design. Based on our analysis, the 2nd generation Industrial Watertube Boiler when developed and commercialized, could potentially save 265 trillion Btu and $1.6 billion in fuel costs across U.S. industry through increased efficiency. Its ultra-clean combustion could eliminate 57,000 tons of NOx, 460,000 tons of CO, and 8.8 million tons of CO2 annually from the atmosphere. Reduction in boiler size will bring cost-effective package boilers into a size range previously dominated by more expensive field-erected boilers, benefiting manufacturers and end users through lower capital costs.

  5. 1st paleomagnetic investigation of Nubia Sandstone at Kalabsha, south Western Desert of Egypt

    NASA Astrophysics Data System (ADS)

    Mostafa, R.; Khashaba, A.; El-Hemaly, I. A.; Takla, E. M.; Abdel Aal, E.; Odah, H.

    2016-06-01

    Two profiles have been sampled from the Nubia Sandstone at Aswan, south Western Desert: the 1st profile has been taken from Abu Aggag Formation and the 2nd one was from Sabaya Formation (23.25 °N, 32.75 °E). 136 oriented cores (from 9 sites) have been sampled. Abu Aggag Formation is of Late Cretaceous (Turonian) and Sabaya Formation is of early Cretaceous (Albian-Cenomanian). The studied rocks are subjected to rock magnetic measurements as well as demagnetization treatment. It has been found that hematite is the main magnetic mineral in both formations. Four profile sections from Abu Aggag Formation, yielded a magnetic component with D = 352.7°, I = 36.6° with α95 = 5.2° and the corresponding pole lies at Lat. = 82.8 °N and Long. = 283.1 °E. Five profile sections from Sabaya Formation, yielded a magnetic component with D = 348.6°, I = 33.3° with α95 = 5.8° and the corresponding pole lies at Lat. = 78.3 °N and Long. = 280.4 °E. The obtained paleopole for the two formations lies at Lat. = 80.5 °N and Long. = 281.7 °E. The obtaind magnetic components are considered primary and the corresponding paleopole reflects the age of Nubia Sandstone when compared with the previously obtained Cretaceous poles for Egypt.

  6. Antoniadi's Floor

    NASA Technical Reports Server (NTRS)

    2005-01-01

    16 February 2005 This Mars Global Surveyor (MGS) Orbiter Camera (MOC) image shows landforms on the floor of Antoniadi Crater. The circular features were once meteor impact craters that have been almost completely eroded away.

    Location near: 21.6oN, 297.4oW Image width: 3.0 km (1.9 mi) Illumination from: upper left Season: Northern Summer

  7. Trough Floor

    NASA Technical Reports Server (NTRS)

    2005-01-01

    3 March 2005 This Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image shows boulders on the floor of a wide trough in Memnonia Fossae.

    Location near: 18.8oS, 150.3oW Image width: 3 km (1.9 mi) Illumination from: upper left Season: Southern Winter

  8. Floor Chemical Basics.

    ERIC Educational Resources Information Center

    Shaw, Richard

    1998-01-01

    Discusses the issues to consider when selecting floor-care chemicals, including the floor-finish systems for hard-surface floors and the care of carpeted floors. Provides thoughts on cleaning chemical usage and environmental awareness. (GR)

  9. CRC handbook of geophysical exploration at sea, 2nd edition

    SciTech Connect

    Geuer, R.A. )

    1990-01-01

    This book presents some of the most advanced research and operational information currently available about hard minerals and hydrocarbons. Information is provided in an integrated, interdisciplinary manner, stressing case histories and review chapters. Illustrations, graphs, tables, and color satellite images are used to graphically present the results of gravity, geodetic and seismic surveys, and 3-D sea floor sub-bottom visualizations. Data has been obtained from the Atlantic and Pacific Oceans, Gulf of Mexico, and Caribbean Sea using satellites, aircraft, and ships.

  10. Floors: Selection and Maintenance.

    ERIC Educational Resources Information Center

    Berkeley, Bernard

    Flooring for institutional, commercial, and industrial use is described with regard to its selection, care, and maintenance. The following flooring and subflooring material categories are discussed--(1) resilient floor coverings, (2) carpeting, (3) masonry floors, (4) wood floors, and (5) "formed-in-place floors". The properties, problems,…

  11. What's Up With Mercury's 2nd-Degree Shape?

    NASA Astrophysics Data System (ADS)

    Chen, E.; Phillips, R. J.; Zhong, S.

    2015-12-01

    The long-wavelength topography and geoid of a planet are basic observations fundamental to understanding the planet's thermal and dynamical history. Observations by the MESSENGER spacecraft have significantly reduced the uncertainty in the spherical harmonic 2nd-degree (l2) topography and gravity coefficients. Similar to those of the Moon, the long wavelength shape and geoid of Mercury are significantly out of hydrostatic equilibrium [Perry et al., 2015]. The diversion from equilibrium of the Moon has been attributed to orbital evolution and the "freezing-in" of a fossil bulge. With respect to Mercury, the disequilibrium of the l2 shape and geoid is unlikely to be due to its orbital history [Matsuyama and Nimmo, 2009]. Non-hydrostatic models can explain the gravity and shape of Mercury. Buoyancy from thermal anomalies isostatically supporting the surface falls short of reproducing the observed l2 admittance and topography. We explore three scenarios that can generate high admittances at degree-2: flexural/membrane loading on the surface, buoyant structures within the mantle, or topography on the core-mantle boundary. We discuss both isostatic and dynamic models of compensation, and include variations of viscosity structure and elastic properties. However, typical sources of these mechanisms (e.g. large volcanic provinces that collectively have symmetry about the equator or mantle convection with a strong l2 component) are not obviously present on Mercury.

  12. PREFACE: 2nd International Symposium "Optics and its Applications"

    NASA Astrophysics Data System (ADS)

    Calvo, Maria L.; Dolganova, Irina N.; Gevorgyan, Narine; Guzman, Angela; Papoyan, Aram; Sarkisyan, Hayk; Yurchenko, Stanislav

    2016-01-01

    The ICTP smr2633: 2nd International Symposium "Optics and its Applications" (OPTICS-2014) http://indico.ictp.it/event/a13253/ was held in Yerevan and Ashtarak, Armenia, on 1-5 September 2014. The Symposium was organized by the Abdus Salam International Center for Theoretical Physics (ICTP) with the collaboration of the SPIE Armenian Student Chapter, the Armenian TC of ICO, the Russian-Armenian University (RAU), the Institute for Physical Research of the National Academy of Sciences of Armenia (IPR of NAS), the Greek-Armenian industrial company LT-Pyrkal, and the Yerevan State University (YSU). The Symposium was co-organized by the BMSTU SPIE & OSA student chapters. The International Symposium OPTICS-2014 was dedicated to the 50th anniversary of the Abdus Salam International Center for Theoretical Physics. This symposium "Optics and its Applications" was the First Official ICTP Scientific Event in Armenia. The presentations at OPTICS-2014 were centered on these topics: optical properties of nanostructures; quantum optics & information; singular optics and its applications; laser spectroscopy; strong field optics; nonlinear & ultrafast optics; photonics & fiber optics; optics of liquid crystals; and mathematical methods in optics.

  13. 2nd Circuit vacates sanction against plantiff's attorney.

    PubMed

    1999-07-23

    The 2nd U.S. Circuit Court of Appeals vacated sanctions against attorney Lee Nuwesra whose client claimed HIV discrimination. The court ruled that U.S. District Judge Constance Baker Motley abused her judicial discretion in ruling that Nuwesra must pay $25,000 of legal costs spent by the client's employer in defending itself against litigation that the judge found frivolous. The appeals panel faulted the judge for not specifying which conduct on the part of the attorney was actionable. Plaintiff [name removed] claimed that his firing from [name removed] & [name removed], Inc., was motivated by his HIV illness and that his rights under the Americans with Disabilities Act were violated. [Name removed] failed to establish that his employer knew his HIV status. Motley sanctioned Nuwesra for not performing adequate pre-trial investigation in the case. According to Federal Rules of Civil Procedure judges can only sanction attorneys at the request of the opposing side, which was not made by the defendants in this case.

  14. 1st HPV Test for Use with Preservative Fluid

    MedlinePlus

    ... 159789.html 1st HPV Test for Use With Preservative Fluid Human papillomavirus responsible for 70 percent of ... Roberts Friday, July 8, 2016 FRIDAY, July 8, 2016 (HealthDay News) -- The U.S. Food and Drug Administration has approved Roche's cobas HPV ...

  15. Scalloped Floor

    NASA Technical Reports Server (NTRS)

    2006-01-01

    13 July 2006 This Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image shows erosional remnants of layered rock and large windblown ripples on the floor of a crater in the Tyrrhena Terra region of Mars. The layered rocks are most likely sedimentary.

    Location near: 15.5oS, 270.5oW Image width: 3 km (1.9 mi) Illumination from: upper left Season: Southern Autumn

  16. Tiled Floor

    NASA Technical Reports Server (NTRS)

    2006-01-01

    30 April 2006 This Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image shows a variety of materials found on the floor of an impact crater northwest of Hellas Planitia. The discontinuous, dark-toned ridges, typically running diagonally across the scene, are windblown ripples which overlie light-toned rock that is heavily fractured and cratered.

    Location near: 25.0oS, 322.9oW Image width: 3 km (1.9 mi) Illumination from: upper left Season: Southern Summer

  17. The 2nd Generation Real Time Mission Monitor (RTMM) Development

    NASA Technical Reports Server (NTRS)

    Blakeslee, Richard; Goodman, Michael; Meyer, Paul; Hardin, Danny; Hall, John; He, Yubin; Regner, Kathryn; Conover, Helen; Smith, Tammy; Lu, Jessica; Garrett, Michelle

    2009-01-01

    The NASA Real Time Mission Monitor (RTMM) is a visualization and information system that fuses multiple Earth science data sources, to enable real time decisionmaking for airborne and ground validation experiments. Developed at the National Aeronautics and Space Administration (NASA) Marshall Space Flight Center, RTMM is a situational awareness, decision-support system that integrates satellite imagery and orbit data, radar and other surface observations (e.g., lightning location network data), airborne navigation and instrument data sets, model output parameters, and other applicable Earth science data sets. The integration and delivery of this information is made possible using data acquisition systems, network communication links, network server resources, and visualizations through the Google Earth virtual globe application. In order to improve the usefulness and efficiency of the RTMM system, capabilities are being developed to allow the end-user to easily configure RTMM applications based on their mission-specific requirements and objectives. This second generation RTMM is being redesigned to take advantage of the Google plug-in capabilities to run multiple applications in a web browser rather than the original single application Google Earth approach. Currently RTMM employs a limited Service Oriented Architecture approach to enable discovery of mission specific resources. We are expanding the RTMM architecture such that it will more effectively utilize the Open Geospatial Consortium Sensor Web Enablement services and other new technology software tools and components. These modifications and extensions will result in a robust, versatile RTMM system that will greatly increase flexibility of the user to choose which science data sets and support applications to view and/or use. The improvements brought about by RTMM 2nd generation system will provide mission planners and airborne scientists with enhanced decision-making tools and capabilities to more

  18. PREFACE: 2nd National Conference on Nanotechnology 'NANO 2008'

    NASA Astrophysics Data System (ADS)

    Czuba, P.; Kolodziej, J. J.; Konior, J.; Szymonski, M.

    2009-03-01

    This issue of Journal of Physics: Conference Series contains selected papers presented at the 2nd National Conference on Nanotechnology 'NANO2008', that was held in Kraków, Poland, 25-28 June 2008. It was organized jointly by the Polish Chemical Society, Polish Physical Society, Polish Vacuum Society, and the Centre for Nanometer-scale Science and Advanced Materials (NANOSAM) of the Jagiellonian University. The meeting presentations were categorized into the following topics: 1. Nanomechanics and nanotribology 2. Characterization and manipulation in nanoscale 3. Quantum effects in nanostructures 4. Nanostructures on surfaces 5. Applications of nanotechnology in biology and medicine 6. Nanotechnology in education 7. Industrial applications of nanotechnology, presentations of the companies 8. Nanoengineering and nanomaterials (international sessions shared with the fellows of Maria-Curie Host Fellowships within the 6th FP of the European Community Project 'Nano-Engineering for Expertise and Development, NEED') 9. Nanopowders 10. Carbon nanostructures and nanosystems 11. Nanoelectronics and nanophotonics 12. Nanomaterials in catalysis 13. Nanospintronics 14. Ethical, social, and environmental aspects of nanotechnology The Conference was attended by 334 participants. The presentations were delivered as 7 invited plenary lectures, 25 invited topical lectures, 78 oral and 108 poster contributions. Only 1/6 of the contributions presented during the Conference were submitted for publication in this Proceedings volume. From the submitted material, this volume of Journal of Physics: Conference Series contains 37 articles that were positively evaluated by independent referees. The Organizing Committee gratefully acknowledges all these contributions. We also thank all the referees of the papers submitted for the Proceedings for their timely and thorough work. We would like to thank all members of the National Program Committee for their work in the selection process of

  19. Development of a Hydrologic Characterization Technology for Fault Zones Phase II 2nd Report

    SciTech Connect

    Karasaki, Kenzi; Doughty, Christine; Gasperikova, Erika; Peterson, John; Conrad, Mark; Cook, Paul; Tiemi, Onishi

    2011-03-31

    This is the 2nd report on the three-year program of the 2nd phase of the NUMO-LBNL collaborative project: Development of Hydrologic Characterization Technology for Fault Zones under NUMO-DOE/LBNL collaboration agreement. As such, this report is a compendium of the results by Kiho et al. (2011) and those by LBNL.

  20. Examples to Accompany "Descriptive Cataloging of Rare Books, 2nd Edition."

    ERIC Educational Resources Information Center

    Association of Coll. and Research Libraries, Chicago, IL.

    This book is intended to be used with "Descriptive Cataloging of Rare Books," 2nd edition (DCRB) as an illustrative aid to catalogers and others interested in or needing to interpret rare book cataloging. As such, it is to be used in conjunction with the rules it illustrates, both in DCRB and in "Anglo-American Cataloging Rules," 2nd edition…

  1. 2nd PEGS Annual Symposium on Antibodies for Cancer Therapy: April 30-May 1, 2012, Boston, USA.

    PubMed

    Ho, Mitchell; Royston, Ivor; Beck, Alain

    2012-01-01

    The 2nd Annual Antibodies for Cancer Therapy symposium, organized again by Cambridge Healthtech Institute as part of the Protein Engineering Summit, was held in Boston, USA from April 30th to May 1st, 2012. Since the approval of the first cancer antibody therapeutic, rituximab, fifteen years ago, eleven have been approved for cancer therapy, although one, gemtuzumab ozogamicin, was withdrawn from the market. The first day of the symposium started with a historical review of early work for lymphomas and leukemias and the evolution from murine to human antibodies. The symposium discussed the current status and future perspectives of therapeutic antibodies in the biology of immunoglobulin, emerging research on biosimilars and biobetters, and engineering bispecific antibodies and antibody-drug conjugates. The tumor penetration session was focused on the understanding of antibody therapy using ex vivo tumor spheroids and the development of novel agents targeting epithelial junctions in solid tumors. The second day of the symposium discussed the development of new generation recombinant immunotoxins with low immunogenicity, construction of chimeric antigen receptors, and the proof-of-concept of 'photoimmunotherapy'. The preclinical and clinical session presented antibodies targeting Notch signaling and chemokine receptors. Finally, the symposium discussed emerging technologies and platforms for therapeutic antibody discovery.

  2. Enhanced Deficits in Long-Term Potentiation in the Adult Dentate Gyrus with 2nd Trimester Ethanol Consumption

    PubMed Central

    Helfer, Jennifer L.; White, Emily R.; Christie, Brian R.

    2012-01-01

    Ethanol exposure during pregnancy can cause structural and functional changes in the brain that can impair cognitive capacity. The hippocampal formation, an area of the brain strongly linked with learning and memory, is particularly vulnerable to the teratogenic effects of ethanol. In the present experiments we sought to determine if the functional effects of developmental ethanol exposure could be linked to ethanol exposure during any single trimester-equivalent. Ethanol exposure during the 1st or 3rd trimester-equivalent produced only minor changes in synaptic plasticity in adult offspring. In contrast, ethanol exposure during the 2nd trimester equivalent resulted in a pronounced decrease in long-term potentiation, indicating that the timing of exposure influences the severity of the deficit. Together, the results from these experiments demonstrate long-lasting alterations in synaptic plasticity as the result of developmental ethanol exposure and dependent on the timing of exposure. Furthermore, these results allude to neural circuit malfunction within the hippocampal formation, perhaps relating to the learning and memory deficits observed in individuals with fetal alcohol spectrum disorders. PMID:23227262

  3. Summary of the 2nd International Symposium on Arthrogryposis, St. Petersburg, Russia, September 17-19, 2014.

    PubMed

    Hall, Judith G; Agranovich, Olga; Ogranovich, Alga; Pontén, Eva; Pontén, Ava; van Bosse, Harold J P

    2015-06-01

    Enormous progress has been made in understanding the etiology and therapies for arthrogryposis (multiple congenital contractures). A 2nd International Symposium on Arthrogryposis was sponsored by the Turner Institute in St. Petersburg, Russia. Olga Agranovich, Head of the Arthrogryposis Department of the Turner Institute, organized this special meeting. Care providers from multiple disciplines from all over the world representing 18 nations attended. Participants included: Pediatric orthopedic specialists, rehabilitation physicians, occupational therapists, physical therapists, medical geneticists, neurologists, craniofacial physicians, psychologists, developmental biologists, as well as representatives from parent support groups. The 1st symposium established the need for a collaborative and interdisciplinary approach to the treatment of arthrogryposis, engagement of parent support organizations, and the aim for more research. The Second Symposium highlighted the continuing need for more research on various therapies, identification of different types of arthrogryposis, standardized descriptions of severity, development of new orthotics, improved prenatal diagnosis, and studying adult outcome. Major progress has been made on both upper and lower limb treatments.

  4. EDITORIAL: The 2nd International Symposium on Functional Materials

    NASA Astrophysics Data System (ADS)

    Lu, L.; Lai, M. O.

    2007-12-01

    Following the success of the 1st International Symposium on Functional Materials held in Kuala Lumpur, Malaysia, 5-8 December 2005, the second symposium was held in the beautiful city of Hangzhou, People's Republic of China, 16-19 May 2007. The latter symposium was a gathering of about 200 renowned researchers from 16 countries around the world. The conference consisted of 24 symposia, 5 keynote papers, 21 invited papers, 108 oral presentations and about 160 poster papers covering the frontier areas of materials science and technology of functional materials. They included topics such as energy storage materials, ferroelectric materials, ferromagnetic materials, ferroelectric thin films, applications of functional materials, nanofabrication, computational design, shape memory alloys, application of shape memory materials, ferroelectrics and thermoelectrics, advances in characterizations, magneto-optical materials, Zn and Ti oxides, synthesis of nanopowders and wires, and many other advanced functional materials. With the receipt of more than 396 abstracts, this conference was a gathering of great minds in one place to discuss the research frontiers and discoveries in functional materials. The Organizing Committee would like to express its sincere thanks to the members of the International Advisory Committee for their invaluable contributions to the symposium. The committee is also grateful for the generous support from the many sponsors. A word of sincere thanks needs to go to Professor Roger Wäppling, Editor-in-Chief and the editorial staff of IOP Publishing for the publication of selected papers in this special issue of Physica Scripta. Finally, our deepest gratitude should be directed to the National University of Singapore, Zhejiang University and the General Research Institute for Nonferrous Metals, People's Republic of China for, without their support, the conference would not have been a success.

  5. The 2nd Generation Real Time Mission Monitor (RTMM) Development

    NASA Astrophysics Data System (ADS)

    Blakeslee, R. J.; Goodman, M.; Hardin, D. M.; Hall, J.; Yubin He, M.; Regner, K.; Conover, H.; Smith, T.; Meyer, P.; Lu, J.; Garrett, M.

    2009-12-01

    The NASA Real Time Mission Monitor (RTMM) is a visualization and information system that fuses multiple Earth science data sources, to enable real time decision-making for airborne and ground validation experiments. Developed at the National Aeronautics and Space Administration (NASA) Marshall Space Flight Center, RTMM is a situational awareness, decision-support system that integrates satellite imagery and orbit data, radar and other surface observations (e.g., lightning location network data), airborne navigation and instrument data sets, model output parameters, and other applicable Earth science data sets. The integration and delivery of this information is made possible using data acquisition systems, network communication links, network server resources, and visualizations through the Google Earth virtual globe application. In order to improve the usefulness and efficiency of the RTMM system, capabilities are being developed to allow the end-user to easily configure RTMM applications based on their mission-specific requirements and objectives. This second generation RTMM is being redesigned to take advantage of the Google plug-in capabilities to run multiple applications in a web browser rather than the original single application Google Earth approach. Currently RTMM employs a limited Service Oriented Architecture approach to enable discovery of mission specific resources. We are expanding the RTMM architecture such that it will more effectively utilize the Open Geospatial Consortium Sensor Web Enablement services and other new technology software tools and components. These modifications and extensions will result in a robust, versatile RTMM system that will greatly increase flexibility of the user to choose which science data sets and support applications to view and/or use. The improvements brought about by RTMM 2nd generation system will provide mission planners and airborne scientists with enhanced decision-making tools and capabilities to more

  6. 2nd interface between ecology and land development in California

    USGS Publications Warehouse

    Keeley, Jon E.; Baer-Keeley, Melanie; Fortheringham, C.J.

    2000-01-01

    The 2nd Interface Between Ecology and Land Development Conference was held in association with Earth Day 1997, five years after the first Interface Conference. Rapid population growth in California has intensified the inevitable conflict between land development and preservation of natural ecosystems. Sustainable development requires wise use of diminishing natural resources and, where possible, restoration of damaged landscapes. These Earth Week Celebrations brought together resource managers, scientists, politicians, environmental consultants, and concerned citizens in an effort to improve the communication necessary to maintain our natural biodiversity, ecosystem processes and general quality of life. As discussed by our keynote speaker, Michael Soule, the best predictor of habitat loss is population growth and nowhere is this better illustrated than in California. As urban perimeters expand, the interface between wildlands and urban areas increases. Few problems are more vexing than how to manage the fire prone ecosystems indigenous to California at this urban interface. Today resource managers face increasing challenges of dealing with this problem and the lead-off section of the proceedings considers both the theoretical basis for making decisions related to prescribed burning and the practical application. Habitat fragmentation is an inevitable consequence of development patterns with significant impacts on animal and plant populations. Managers must be increasingly resourceful in dealing with problems of fragmentation and the often inevitable consequences, including susceptibility to invasive oganisms. One approach to dealing with fragmentation problems is through careful landplanning. California is the national leader in the integration of conservation and economics. On Earth Day 1991, Governor Pete Wilson presented an environmental agenda that promised to create between land owners and environmentalists, agreements that would guarantee the protection of

  7. Evaluation of splash erosion at forest floor in mature Japanese cypress plantations

    NASA Astrophysics Data System (ADS)

    Nanko, K.; Mizugaki, S.; Onda, Y.; Hiramatsu, S.

    2005-12-01

    Poorly managed mature Japanese cypress ( Chamaecyparis obtusa) plantations in Japan have bared floor with little surface cover because cypress litter readily decomposes small pieces and weak penetration of sunlight results in poor growth of forest undergrowth, therefore suffered from surface erosion. In surface erosion process at forest floor, the effect of raindrop-impact-induced erosion would be high because the canopy produces large raindrops and promotes raindrops' erosive potential by increasing their kinetic energy. In this study, we evaluated the effect of slopes and transition of the splash erosion in order to investigate the process of surface erosion at bared forest floor. This study area is a mature Japanese cypress plantation in Taisho town, Shikoku Island, Japan. The splash erosion was observed by 27 splash cups (exposed soil area with 10cm in diameter) at forest slope with the inclination from 9 to 39°, respectively. The splash cups were divided five slope classes; each class value was 12.5, 20.5, 25.5, 29.5, and 37°. The splashed soil was separately collected in three split periods; each period had 86.2, 68.0, and 84.0 mm throughfall precipitation. Raindrop kinetic energy was simultaneously monitored by 2 laser raindrop-sizing instruments. Throughfall had similar drop size distribution and kinetic energy during each period and mean drop kinetic energy was 15.0 J m-2 mm-1. The splash rate during all observation period was 14.5, 11.4, 12.2, 9.1, and 4.6 g m-2 mm-1 at the each slope class, respectively. The splashed soil was found to reduce as time. Particularly the gentlest slope class had marked decrease for the splash rate; 25.2, 10.4, and 6.9 g m-2 mm-1 during 1st, 2nd, and 3rd period, respectively. On the other hand the steepest slope class had little change of the splash rate; 3.3, 6.7, and 4.2 g m-2 mm-1 . Some earlier studies using cultivated soil showed the splash rate increased with slopes, but this study showed contrary results. Although

  8. EDITORIAL: The 1st International Conference on Nanomanufacturing (NanoMan2008) The 1st International Conference on Nanomanufacturing (NanoMan2008)

    NASA Astrophysics Data System (ADS)

    Luo, Jack Jiqui; Fang, Fengzhou

    2009-05-01

    Nanomanufacturing is an emerging technology in the field of synthesis of nanomaterials, manufacture of nanodevices, nanosystems and the relevant characterization technologies, and will greatly impact our society and environment: speeding up scientific discovery, technological development, improving healthcare and living standards and slowing down the exhaustion of energy resources, to name but few. The 1st International Conference on Nanomanufacturing (NanoMan2008) was held on the 13-16 July 2008 in Singapore in conjunction with ThinFilm2008 (The 4th International Conference on Technological Advances of Thin Films & Surface Coatings). Approximately 140 delegates from all over the world have participated in the conference and presented their latest discoveries and technological developments. The main focuses of the conference were modern nanomanufacturing by laser machining, focused ion beam fabrication, nano/micro-molding/imprinting, nanomaterial synthesis and characterization, nanometrology and nano/microsystems fabrication and characterization. There was also great interest in applications of nanomanufacturing technologies in traditional areas such as free form machining, polishing and grinding with nano-scale precision and the smoothness of surfaces of objects, and applications in space exploration, military and medicine. This special issue is devoted to NanoMan2008 with a collection of 9 invited talks presented at the conference, covering all the topics of nanomanufacturing technology and development. These papers have been upgraded by the authors with new results and discoveries since the preparation of the conference manuscripts, hence presenting the latest developments. We would like to take this opportunity to thank all the delegates who attended the conference and made the conference successful, and to the authors who contributed papers to this special issue. Thanks also go to the conference committee for their efforts and devotion to the conference. We

  9. PREFACE: 2nd Workshop on Germanium Detectors and Technologies

    NASA Astrophysics Data System (ADS)

    Abt, I.; Majorovits, B.; Keller, C.; Mei, D.; Wang, G.; Wei, W.

    2015-05-01

    The 2nd workshop on Germanium (Ge) detectors and technology was held at the University of South Dakota on September 14-17th 2014, with more than 113 participants from 8 countries, 22 institutions, 15 national laboratories, and 8 companies. The participants represented the following big projects: (1) GERDA and Majorana for the search of neutrinoless double-beta decay (0νββ) (2) SuperCDMS, EDELWEISS, CDEX, and CoGeNT for search of dark matter; (3) TEXONO for sub-keV neutrino physics; (4) AGATA and GRETINA for gamma tracking; (5) AARM and others for low background radiation counting; (5) as well as PNNL and LBNL for applications of Ge detectors in homeland security. All participants have expressed a strong desire on having better understanding of Ge detector performance and advancing Ge technology for large-scale applications. The purpose of this workshop was to leverage the unique aspects of the underground laboratories in the world and the germanium (Ge) crystal growing infrastructure at the University of South Dakota (USD) by brining researchers from several institutions taking part in the Experimental Program to Stimulate Competitive Research (EPSCoR) together with key leaders from international laboratories and prestigious universities, working on the forefront of the intensity to advance underground physics focusing on the searches for dark matter, neutrinoless double-beta decay (0νββ), and neutrino properties. The goal of the workshop was to develop opportunities for EPSCoR institutions to play key roles in the planned world-class research experiments. The workshop was to integrate individual talents and existing research capabilities, from multiple disciplines and multiple institutions, to develop research collaborations, which includes EPSCor institutions from South Dakota, North Dakota, Alabama, Iowa, and South Carolina to support multi-ton scale experiments for future. The topic areas covered in the workshop were: 1) science related to Ge

  10. ["1st Therapeutic Red Cross Hospital" during the civil war].

    PubMed

    Simonenko, V B; Abashin, V G

    2014-04-01

    The article presents the documentary information about the founding, the establishment and early years of the 1st Therapeutic Red Cross Hospital - in the future - Mandryka Central Military Clinical Hospital of the Ministry of Defence of the Russian Federation. Presented the work of the Hospital during the dificult period of the Civil War, typhus epidemic, famine and devastation. Specified its staffing structure, command, medical and administrative staff, travel and accommodation till the moment of the deployment in the Silver Lane in Moscow. PMID:25051792

  11. The 1st All-Russian Workshop on Archaeoastronomy

    NASA Astrophysics Data System (ADS)

    Bochkarev, Nikolai G.

    2007-08-01

    The 1st All-Russia Workshop on Archaeoastronomy “Astronomical and World-Outlook Meaning of the Archaeological Monuments of South Ural” was held on June 19-25, 2006, at the ground of the archaeological center “Arkaim” (Chelyabinsk Region). Besides about 30 talks, astronomical measurements were performed at two archaeological objects under intensive study: Arkaim Site (Bronze Epoch, XVIII-XVI c. B.C.) and tumuli “with whiskers” complex Kondurovsky (V-VIII c. A.D.). The promising character of the megalithic complex on the Vera Island (Lake Turgoyak) was stated.

  12. 2nd U.S. Case of Bacteria Resistant to Last-Resort Antibiotic

    MedlinePlus

    ... news/fullstory_159807.html 2nd U.S. Case of Bacteria Resistant to Last-Resort Antibiotic Scientists concerned it ... the United States who was infected with a bacteria that is resistant to an antibiotic of last ...

  13. Production and verification of a 2nd generation clonal group of Japanese flounder, Paralichthys olivaceus

    PubMed Central

    Hou, Jilun; Zhang, Xiaoyan; Wang, Yufen; Sun, Zhaohui; Si, Fei; Jiang, Xiufeng; Liu, Haijin

    2016-01-01

    Clonal fishes are useful tools in biology and aquaculture studies due to their isogenicity. In Japanese flounder (Paralichthys olivaceus), a group of homozygous clones was created by inducing meiogynogenesis in eggs from a mitogynogenetic homozygous diploid. As the clones reached sexual maturity, meiogynogenesis was again induced in order to produce a 2nd generation clonal group of Japanese flounder. After 3 months, there were 611 healthy, surviving individuals. Twenty-four microsatellite markers, that covered all the linkage groups of Japanese flounder, were used to identify the homozygosity of the 2nd generation clones; no heterozygous locus was detected. This indicates that the production of a 2nd generation clonal group of Japanese flounder was successful. Restriction-site DNA associated sequencing at the genomic level also confirmed the homozygosity and clonality of the 2nd generation clonal group. Furthermore, these 2nd generation clones had a small coefficient of variation for body shape indices at 210 days of age and showed a high degree of similarity in body characteristics among individuals. The successful production of 2nd generation clones has laid the foundation for the large-scale production of clonal Japanese flounder. PMID:27767055

  14. 1st Stage Separation Aerodynamics Of VEGA Launcher

    NASA Astrophysics Data System (ADS)

    Genito, M.; Paglia, F.; Mogavero, A.; Barbagallo, D.

    2011-05-01

    VEGA is an European launch vehicle under development by the Prime Contractor ELV S.p.A. in the frame of an ESA contract. It is constituted by four stages, dedicated to the scientific/commercial market of small satellites (300 ÷ 2500 kg) into Low Earth Orbits, with inclinations ranging from 5.2° up to Sun Synchronous Orbits and with altitude ranging from 300 to 1500 km. Aim of this paper is to present a study of flow field due to retro-rockets impingement during the 1st stage VEGA separation phase. In particular the main goal of the present work is to present the aerodynamic activities performed for the justification of the separation phase.

  15. 1st meeting on topical drug delivery to the nail.

    PubMed

    Murdan, Sudaxshina

    2007-07-01

    The first ever symposium dedicated solely to drug delivery to the nail following topical application was held on the 2nd April 2007, in London, UK, organised by Dr Clive Roper (Charles River Laboratories, Scotland) and Dr Sudaxshina Murdan (School of Pharmacy, University of London, UK), under the auspices of Skin Forum. The 1-day meeting was attended by approximately 35 delegates from industry, academia and hospitals, and provided a much-needed forum for the presentation and discussion of research and problems in this emerging field. Topical drug delivery is especially suitable for onychomycosis (fungal infections of the nail plate and/or nail bed) and nail psoriasis, which affect 2 - 13 and 1 - 3% of the general population, respectively, and make up the bulk of nail disorders. Topical therapy would avoid the adverse events and drug interactions of systemic antifungal agents and the pain of injection when antipsoriatic agents are injected into affected nail folds. However, successful topical therapy is extremely challenging due to the very low permeability of the nail plate. Five speakers spoke about various aspects of topical drug delivery to the nail, including review of the nail plate structure, function, diseases, their existing therapies (systemic and topical), limitations and global sales. The need for effective topical drug delivery to the nail to overcome the problems associated with present treatment, and the fact that there are few topical formulations available for the treatment of nail fungal infections and psoriasis, and the even fewer effective formulations, was highlighted. PMID:17683257

  16. 1st meeting on topical drug delivery to the nail.

    PubMed

    Murdan, Sudaxshina

    2007-07-01

    The first ever symposium dedicated solely to drug delivery to the nail following topical application was held on the 2nd April 2007, in London, UK, organised by Dr Clive Roper (Charles River Laboratories, Scotland) and Dr Sudaxshina Murdan (School of Pharmacy, University of London, UK), under the auspices of Skin Forum. The 1-day meeting was attended by approximately 35 delegates from industry, academia and hospitals, and provided a much-needed forum for the presentation and discussion of research and problems in this emerging field. Topical drug delivery is especially suitable for onychomycosis (fungal infections of the nail plate and/or nail bed) and nail psoriasis, which affect 2 - 13 and 1 - 3% of the general population, respectively, and make up the bulk of nail disorders. Topical therapy would avoid the adverse events and drug interactions of systemic antifungal agents and the pain of injection when antipsoriatic agents are injected into affected nail folds. However, successful topical therapy is extremely challenging due to the very low permeability of the nail plate. Five speakers spoke about various aspects of topical drug delivery to the nail, including review of the nail plate structure, function, diseases, their existing therapies (systemic and topical), limitations and global sales. The need for effective topical drug delivery to the nail to overcome the problems associated with present treatment, and the fact that there are few topical formulations available for the treatment of nail fungal infections and psoriasis, and the even fewer effective formulations, was highlighted.

  17. PREFACE: 1st International Conference on Mechanical Engineering Research 2011 (ICMER2011)

    NASA Astrophysics Data System (ADS)

    Abu Bakar, Rosli

    2012-09-01

    The year 2010 represented a significant milestone in the history of the Mechanical Engineering community with the organization of the first and second national level conferences (National Conference in Mechanical Engineering for Research, 1st and 2nd NCMER) at Universiti Malaysia Pahang on 26-27 May and 3-4 December 2010. The conferences attracted a large number of delegates from different premier academic and research institutions in the country to participate and share their research experiences at the conference. The International Conference on Mechanical Engineering Research (ICMER 2011) followed on from the first and second conferences due to good support from researchers. The ICMER 2011 is a good platform for researchers and postgraduate students to present their latest finding in research. The conference covers a wide range of topics including the internal combustion engine, machining processes, heat and mass transfer, fuel, biomechanical analysis, aerodynamic analysis, thermal comfort, computational techniques, design and simulation, automotive transmission, optimization techniques, hybrid electric vehicles, engine vibration, heat exchangers, finite element analysis, computational fluid dynamics, green energy, vehicle dynamics renewable energy, combustion, design, product development, advanced experimentation techniques, to name but a few. The international conference has helped to bridge the gap between researchers working at different institutions and in different countries to share their knowledge and has helped to motivate young scientists with their research. This has also given some clear direction for further research from the deliberations of the conference. Several people have contributed in different ways to the success of the conference. We thank the keynote speakers and all authors of the contributed papers, for the cooperation rendered to us in the publication of the CD conference proceedings. In particular, we would like to place on record our

  18. Cleaning up Floor Care.

    ERIC Educational Resources Information Center

    Carr, Richard; McLean, Doug

    1995-01-01

    Discusses how educational-facility maintenance departments can cut costs in floor cleaning through careful evaluation of floor equipment and products. Tips for choosing carpet detergents are highlighted. (GR)

  19. Mixed-Up Floors.

    ERIC Educational Resources Information Center

    Shaw, Richard

    2001-01-01

    Examines the maintenance management problems inherent in cleaning multiple flooring materials revealing the need for school officials to keep it simple when choosing flooring types. Also highlighted is a carpet recycling program used by Wright State University (Ohio). (GR)

  20. Four-dimensional investigation of the 2nd order volume autocorrelation technique

    NASA Astrophysics Data System (ADS)

    Faucher, O.; Tzallas, P.; Benis, E. P.; Kruse, J.; Peralta Conde, A.; Kalpouzos, C.; Charalambidis, D.

    2009-10-01

    The 2nd order volume autocorrelation technique, widely utilized in directly measuring ultra-short light pulses durations, is examined in detail via model calculations that include three-dimensional integration over a large ionization volume, temporal delay and spatial displacement of the two beams of the autocorrelator at the focus. The effects of the inherent displacement to the 2nd order autocorrelation technique are demonstrated for short and long pulses, elucidating the appropriate implementation of the technique in tight focusing conditions. Based on the above investigations, a high accuracy 2nd order volume autocorrelation measurement of the duration of the 5th harmonic of a 50 fs long laser pulse, including the measurement of the carrier wavelength oscillation, is presented.

  1. FIRST FLOOR FRONT ROOM. SECOND FLOOR HAS BEEN REMOVED NOTE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    FIRST FLOOR FRONT ROOM. SECOND FLOOR HAS BEEN REMOVED-- NOTE PRESENCE OF SECOND FLOOR WINDOWS (THE LATTER FLOOR WAS REMOVED MANY YEARS AGO), See also PA-1436 B-12 - Kid-Physick House, 325 Walnut Street, Philadelphia, Philadelphia County, PA

  2. A new analytic solution for 2nd-order Fermi acceleration

    SciTech Connect

    Mertsch, Philipp

    2011-12-01

    A new analytic solution for 2nd-order Fermi acceleration is presented. In particular, we consider time-dependent rates for stochastic acceleration, diffusive and convective escape as well as adiabatic losses. The power law index q of the turbulence spectrum is unconstrained and can therefore account for Kolmogorov (q = 5/3) and Kraichnan (q = 3/2) turbulence, Bohm diffusion (q = 1) as well as the hard-sphere approximation (q = 2). This considerably improves beyond solutions known to date and will prove a useful tool for more realistic modelling of 2nd-order Fermi acceleration in a variety of astrophysical environments.

  3. THEOS: The1st Thailand EO System and

    NASA Astrophysics Data System (ADS)

    Peanvijarnpong, Chanchai

    Thailand has engaged in remote sensing satellite technological and scientific development many years since early 1980s. Thailand Landsat Station was established as a regional center of data processing and dissemination for Thai scientists for data applications. Over the years, GISTDA and Thai user community have been gaining technical experience and expertise in satellite data applications around the country such natural resources and environmental management, forest inventory, forest change detections, soil mapping, land-use and land cover mapping, crop type mapping, coastal shrimp farming, flood zone mapping, base mapping, water and drought management. The Government of Thailand realizes that remote sensing satellite technology is an important mechanism for social and economic development of the country. So the 1st Thailand Earth Observation System (THEOS) development program was approved by the Government since 2003. THEOS system is sub-synchronous satellite orbiting around the earth at 822 km. altitude same as SPOT satellites. It carries two imaging instruments; 2-m Panchromatic telescope with 22 km. swath width and 15-m resolution camera with four-multi-spectral band and 90-km swath wide. THEOS is scheduled to launch around March 2008. A number of technological and scientific activities has been implementing for Thailand and international scientific user community. Therefore THEOS is strong endorsement from the Government of Thailand on the value of remote sensing technology. This paper presents Thailand EO activities including THEOS System and its plans.

  4. 1st Advanced Marine Renewable Energy Instrumentation Experts Workshop

    SciTech Connect

    none,

    2011-10-01

    The U.S. marine energy industry is actively pursuing development of offshore wind and marine hydrokinetic (MHK) energy systems. Experience in the wind energy sector demonstrates that new technology development requires thorough measurement and characterization of the environmental conditions prevalent at installation sites and of technology operating in the field. Presently, there are no turn-key instrumentation system solutions that meet the measurement needs of the marine energy industry. The 1st Advanced Marine Renewable Energy Instrumentation Experts Workshop brought together technical experts from government laboratories, academia, and industry representatives from marine energy, wind, offshore oil and gas, and instrumentation developers to present and discuss the instrumentation needs of the marine energy industry. The goals of the meeting were to: 1. Share the latest relevant knowledge among technical experts; 2. Review relevant state-of-the-art field measurement technologies and methods; 3. Review lessons learned from recent field deployments; 4. Identify synergies across different industries; 5. Identify gaps between existing and needed instrumentation capabilities; 6. Understand who are the leading experts; 7. Provide a forum where stakeholders from the marine energy industry could provide substantive input in the development of new marine energy field deployable instrumentation packages.

  5. Evaluation of a Hand Washing Program for 2nd-Graders

    ERIC Educational Resources Information Center

    Tousman, Stuart; Arnold, Dani; Helland, Wealtha; Roth, Ruth; Heshelman, Nannatte; Castaneda, Oralia; Fischer, Emily; O'Neil, Kristen; Bileto, Stephanie

    2007-01-01

    The purpose of this project was to determine if a multiple-week learner-centered hand washing program could improve hand hygiene behaviors of 2nd-graders in a northern Illinois public school system. Volunteers from the Rockford Hand Washing Coalition went into 19 different classrooms for 4 consecutive weeks and taught a learner-centered program.…

  6. The Effect of Using Computer Edutainment on Developing 2nd Primary Graders' Writing Skills

    ERIC Educational Resources Information Center

    Mohammed Abdel Raheem, Azza Ashraf

    2011-01-01

    The present study attempted to examine the effect of using computer edutainment on developing 2nd graders' writing skills. The study comprised thirty-second year primary stage enrolled in Bani Hamad primary governmental school, Minia governorate. The study adopted the quasi-experimental design. Thirty participants were randomly assigned to one…

  7. Methods for the Determination of Chemical Substances in Marine and Estuarine Environmental Matrices - 2nd Edition

    EPA Science Inventory

    This NERL-Cincinnati publication, “Methods for the Determination of Chemical Substances in Marine and Estuarine Environmental Matrices - 2nd Edition” was prepared as the continuation of an initiative to gather together under a single cover a compendium of standardized laborato...

  8. Proceedings of the 2nd symposium on valves for coal conversion and utilization

    SciTech Connect

    Maxfield, D.A.

    1981-01-01

    The 2nd symposium on valves for coal conversion and utilization was held October 15 to 17, 1980. It was sponsored by the US Department of Energy, Morgantown Energy Technology Center, in cooperation with the Valve Manufacturers Association. Seventeen papers have been entered individually into EDB and ERA. (LTN)

  9. Technical Adequacy of the Disruptive Behavior Rating Scale-2nd Edition--Self-Report

    ERIC Educational Resources Information Center

    Erford, Bradley T.; Miller, Emily M.; Isbister, Katherine

    2015-01-01

    This study provides preliminary analysis of the Disruptive Behavior Rating Scale-2nd Edition--Self-Report, which was designed to screen individuals aged 10 years and older for anxiety and behavior symptoms. Score reliability and internal and external facets of validity were good for a screening-level test.

  10. 2nd International Forum for Surveillance and Control of Mosquitoes and Mosquito-borne Diseases

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The Entomological Society of China (ESC) and Beijing Institute of Microbiology and Epidemiology (BIME) hosted the 2nd International Forum for Surveillance and Control of Mosquitoes and Mosquito-borne Diseases in Beijing, China, May 23-27, 2011. The theme of the Forum was “Impact of global climate ch...

  11. 94. DETAIL, SAME BEAN AS ABOVE, MARKED 'PATENTED DEC. 1ST ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    94. DETAIL, SAME BEAN AS ABOVE, MARKED 'PATENTED DEC. 1ST 1857' - Smithsonian Institution Building, 1000 Jefferson Drive, between Ninth & Twelfth Streets, Southwest, Washington, District of Columbia, DC

  12. Three-dimensional analysis of the distal movement of maxillary 1st molars in patients fitted with mini-implant-aided trans-palatal arches

    PubMed Central

    Miresmaeili, Amirfarhang; Sajedi, Ahmad; Moghimbeigi, Abbas

    2015-01-01

    Objective The aim of this study was to investigate three-dimensional molar displacement after distalization via miniscrews and a horizontal modification of the trans-palatal-arch (TPA). Methods The subjects in this clinical trial were 26 Class II patients. After the preparation of a complete set of diagnostic records, miniscrews were inserted between the maxillary 2nd premolar and 1st molar on the palatal side. Elastic modules connected to the TPA exerting an average force of 150-200 g/side parallel to the occlusal plane were applied. Cone-beam computed tomography was utilized to evaluate the position of the miniscrews relative to the adjacent teeth and maxillary sinus, and the direction of force relative to molar furcation. The distances from the central point of the incisive papilla to the mesiopalatal cusps of the 1st maxillary molars and the distances between the mesiopalatal cusps of the left and right molars were measured to evaluate displacement of the maxillary molars on the horizontal plane. Interocclusal space was used to evaluate vertical changes. Results Mean maxillary 1st molar distalization was 2.3 ± 1.1 mm, at a rate of 0.4 ± 0.2 mm/month, and rotation was not significant. Intermolar width increased by 2.9 ± 1.8 mm. Molars were intruded relative to the neighboring teeth, from 0.1 to 0.8 mm. Conclusions Distalization of molars was possible without extrusion, using the appliance investigated. The intrusive component of force reduced the rate of distal movement. PMID:26445718

  13. Proceedings of the 1st Puerto Rico Biobanking Workshop

    PubMed Central

    Mora, Edna; Robb, James A.; Stefanoff, Gustavo; Mellado, Robert Hunter; Coppola, Domenico; Muñoz-Antonia, Teresita; Flores, Idhaliz

    2015-01-01

    The 1st Puerto Rico Biobanking Workshop took place on August 20th, 2014 in the Auditorium of the Comprehensive Cancer Center of the University of Puerto Rico, Medical Sciences Campus in San Juan Puerto Rico. The program for this 1-day, live workshop included lectures by three biobanking experts, followed by presentations from existing biobanks in Puerto Rico and audience discussion. The need for increasing biobanking expertise in Puerto Rico stems from the fact that Hispanics in general are underrepresented in the biobanks in existence in the US, which limits the research conducted specifically to understand the molecular differences in cancer cells compared to other better studied populations. In turn, this lack of information impairs the development of better diagnostic and therapeutic approaches for our population. Dr. James Robb, M.D., F.C.A.P., consulting pathologist to the National Cancer Institute (NCI) and the Office of Biorepositories and Biospecimen Research (OBBR), opened the workshop with a discussion on the basic aspects of the science of biobanking (e.g., what is a biobank; its goals and objectives; protocols and procedures) in his talk addressing the importance of banking tissues for advancing biomedical research. Next, Dr. Gustavo Stefanoff, from the Cancer Institutes Network of Latin America (RINC by its name in Spanish), explained the mission, objectives, and structure of the Network of Latin-American and Caribbean Biobanks (REBLAC by its name in Spanish), which despite limited resources and many challenges, currently accrue high quality human tissue specimens and data to support cancer research in the region. Dr. Robert Hunter-Mellado, Professor of Internal Medicine, Universidad Central del Caribe, followed with an examination of the ethical and regulatory aspects of biobanking tissues for future research, including informed consent of subjects; protection of human subjects rights; and balancing risks and benefit ratios. In the afternoon, the

  14. 2nd-Order CESE Results For C1.4: Vortex Transport by Uniform Flow

    NASA Technical Reports Server (NTRS)

    Friedlander, David J.

    2015-01-01

    The Conservation Element and Solution Element (CESE) method was used as implemented in the NASA research code ez4d. The CESE method is a time accurate formulation with flux-conservation in both space and time. The method treats the discretized derivatives of space and time identically and while the 2nd-order accurate version was used, high-order versions exist, the 2nd-order accurate version was used. In regards to the ez4d code, it is an unstructured Navier-Stokes solver coded in C++ with serial and parallel versions available. As part of its architecture, ez4d has the capability to utilize multi-thread and Messaging Passage Interface (MPI) for parallel runs.

  15. Floors: Care and Maintenance.

    ERIC Educational Resources Information Center

    Post Office Dept., Washington, DC.

    Guidelines, methods and policies regarding the care and maintenance of post office building floors are overviewed in this handbook. Procedures outlined are concerned with maintaining a required level of appearance without wasting manpower. Flooring types and characteristics and the particular cleaning requirements of each type are given along with…

  16. School Flooring Factors

    ERIC Educational Resources Information Center

    McGrath, John

    2012-01-01

    With all of the hype that green building is receiving throughout the school facility-management industry, it's easy to overlook some elements that may not be right in front of a building manager's nose. It is helpful to examine the role floor covering plays in a green building project. Flooring is one of the most significant and important systems…

  17. Maximizing Hard Floor Maintenance.

    ERIC Educational Resources Information Center

    Steger, Michael

    2000-01-01

    Explains the maintenance options available for hardwood flooring that can help ensure long life cycles and provide inviting spaces. Developing a maintenance system, knowing the type of traffic that the floor must endure, using entrance matting, and adhering to manufacturers guidelines are discussed. Daily, monthly or quarterly, and long-term…

  18. Graphical shapes of the 2nd type singularities of a 3-RR̠R planar mechanism

    NASA Astrophysics Data System (ADS)

    Buium, F.; Duca, C.; Doroftei, I.; Leohchi, D.

    2016-08-01

    This paper intends to discuss about singularity curves of 2nd type inside the workspace of a 3R̠RR planar parallel mechanism used as robot structure. In order to attain this goal we will use certain variation of the links dimensional parameters. This characterization of the mechanism singularities located inside mechanism workspace depends on the dimensional parameters and can be useful in mechanism designing accorded to some functional particularities in the sense that it can help in avoiding singular configurations.

  19. Idaho National Laboratory Quarterly Performance Analysis for the 2nd Quarter FY 2015

    SciTech Connect

    Mitchell, Lisbeth A.

    2015-04-01

    This report is published quarterly by the Idaho National Laboratory (INL) Quality and Performance Management Organization. The Department of Energy (DOE) Occurrence Reporting and Processing System (ORPS), as prescribed in DOE Order 232.2, “Occurrence Reporting and Processing of Operations Information,” requires a quarterly analysis of events, both reportable and not reportable, for the previous 12 months. This report is the analysis of events for the 2nd Qtr FY-15.

  20. FIRST FLOOR REAR ROOM. SECOND FLOOR HAS BEEN REMOVED NOTE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    FIRST FLOOR REAR ROOM. SECOND FLOOR HAS BEEN REMOVED-- NOTE PRESENCE OF SECOND FLOOR WINDOWS AT LEFT. See also PA-1436 B-6 - Kid-Physick House, 325 Walnut Street, Philadelphia, Philadelphia County, PA

  1. FIRST FLOOR REAR ROOM. SECOND FLOOR HAS BEEN REMOVED NOTE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    FIRST FLOOR REAR ROOM. SECOND FLOOR HAS BEEN REMOVED-- NOTE PRESENCE OF SECOND FLOOR WINDOWS AT LEFT. See also PA-1436 B-13 - Kid-Physick House, 325 Walnut Street, Philadelphia, Philadelphia County, PA

  2. NASA 2nd Generation RLV Program Introduction, Status and Future Plans

    NASA Technical Reports Server (NTRS)

    Dumbacher, Dan L.; Smith, Dennis E. (Technical Monitor)

    2002-01-01

    The Space Launch Initiative (SLI), managed by the Second Generation Reusable Launch Vehicle (2ndGen RLV) Program, was established to examine the possibility of revolutionizing space launch capabilities, define conceptual architectures, and concurrently identify the advanced technologies required to support a next-generation system. Initial Program funds have been allocated to design, evaluate, and formulate realistic plans leading to a 2nd Gen RLV full-scale development (FSD) decision by 2006. Program goals are to reduce both risk and cost for accessing the limitless opportunities afforded outside Earth's atmosphere fo civil, defense, and commercial enterprises. A 2nd Gen RLV architecture includes a reusable Earth-to-orbit launch vehicle, an on-orbit transport and return vehicle, ground and flight operations, mission planning, and both on-orbit and on-the-ground support infrastructures All segments of the architecture must advance in step with development of the RLV if a next-generation system is to be fully operational early next decade. However, experience shows that propulsion is the single largest contributor to unreliability during ascent, requires the largest expenditure of time for maintenance, and takes a long time to develop; therefore, propulsion is the key to meeting safety, reliability, and cost goals. For these reasons, propulsion is SLI's top technology investment area.

  3. Macroscopic lithotype characterisation of the 1st Middle-Polish (1st Lusatian) Lignite Seam in the Miocene of central Poland

    NASA Astrophysics Data System (ADS)

    Widera, Marek

    2012-03-01

    The 1st Middle-Polish (1st Lusatian) Lignite Seam is exploited in open-cast mines in central Poland. A large number of lignite lithotypes, grouped in four lithotype associations, are distinguished: xylitic, detritic, xylo-detritic and detro-xylitic lithotype associations, which show various structures. Each lithotype association was produced under specific peat-forming environmental conditions. In the case of the lignite seams under study they represent all the main environments that are known from Neogene mires, i.e.: fen or open water, bush moor, wet forest swamp and dry forest swamp. For a simple and practical description in the field of both the lignite sections and borehole cores, a new codification for lignite lithotypes is proposed. It is based on the codification of clastic deposits (lithofacies). The practical value of the new lignite lithotype codification is examined in three vertical sections of the 1st Middle-Polish Lignite Seam.

  4. Elements of the Next Generation Science Standards' (NGSS) New Framework for K-12 Science Education aligned with STEM designed projects created by Kindergarten, 1st and 2nd grade students in a Reggio Emilio project approach setting

    NASA Astrophysics Data System (ADS)

    Facchini, Nicole

    This paper examines how elements of the Next Generation Science Standards' (NGSS) New Framework for K-12 Science Education standards (National Research Council 2011)---specifically the cross-cutting concept "cause and effect" are aligned with early childhood students' creation of projects of their choice. The study took place in a Reggio Emilio-inspired, K-12 school, in a multi-aged kindergarten, first and second grade classroom with 14 students. Students worked on their projects independently with the assistance of their peers and teachers. The students' projects and the alignment with the Next Generation Science Standards' New Framework were analyzed by using pre and post assessments, student interviews, and discourse analysis. Results indicate that elements of the New Framework for K-12 Science Education emerged through students' project presentation, particularly regarding the notion of "cause and effect". More specifically, results show that initially students perceived the relationship between "cause and effect" to be negative.

  5. Two-Year College Chemistry Conference Proceedings: Southern Regional Conference, (2nd, Little Rock, December 9, 1967); Eastern Regional Conference (1st, Philadelphia, February 2-3, 1968); and Annual Conference (8th, San Francisco, March 29-30, 1968).

    ERIC Educational Resources Information Center

    Chapman, Kenneth, Ed.

    This report on three junior college chemistry conferences includes: (1) new and developing programs in 2-year college chemistry; (2) beginning chemistry offerings--repair of poor backgrounds in chemistry and math; (3) non-science major--chemistry program for non-science students; (4) first-year chemistry course: (a) programmed audio-tutorial…

  6. 2014 Female Athlete Triad Coalition consensus statement on treatment and return to play of the female athlete triad: 1st International Conference held in San Francisco, CA, May 2012, and 2nd International Conference held in Indianapolis, IN, May 2013.

    PubMed

    De Souza, Mary Jane; Nattiv, Aurelia; Joy, Elizabeth; Misra, Madhusmita; Williams, Nancy I; Mallinson, Rebecca J; Gibbs, Jenna C; Olmsted, Marion; Goolsby, Marci; Matheson, Gordon

    2014-03-01

    The Female Athlete Triad is a medical condition often observed in physically active girls and women, and involves 3 components: (1) low energy availability with or without disordered eating, (2) menstrual dysfunction, and (3) low bone mineral density. Female athletes often present with 1 or more of the 3 Triad components, and an early intervention is essential to prevent its progression to serious endpoints that include clinical eating disorders, amenorrhea, and osteoporosis. This consensus statement represents a set of recommendations developed following the first (San Francisco, California) and second (Indianapolis, Indianna) International Symposia on the Female Athlete Triad. It is intended to provide clinical guidelines for physicians, athletic trainers, and other health care providers for the screening, diagnosis, and treatment of the Female Athlete Triad and to provide clear recommendations for return to play. The 2014 Female Athlete Triad Coalition Consensus Statement on Treatment and Return to Play of the Female Athlete Triad Expert Panel has proposed a risk stratification point system that takes into account magnitude of risk to assist the physician in decision-making regarding sport participation, clearance, and return to play. Guidelines are offered for clearance categories, management by a multidisciplinary team, and implementation of treatment contracts. This consensus paper has been endorsed by The Female Athlete Triad Coalition, an International Consortium of leading Triad researchers, physicians, and other health care professionals, the American College of Sports Medicine, and the American Medical Society for Sports Medicine. PMID:24569429

  7. Identity and Awareness in the Minority Experience. Selected Proceedings of the 1st and 2nd Annual Conferences on Minority Studies (March, 1973 and April, 1974). Volume 1, Number 1.

    ERIC Educational Resources Information Center

    Carter, George E., Ed.; Mouser, Bruce L., Ed.

    The first conference focused on specific approaches in the offering of minority studies (both as a collective unit and as separate entities) and on problems of "Anglo" educators in medium-sized Midwestern institutions. Topic panels focusing on various literatures and on specific minority groups were held at the second conference. Stemming directly…

  8. [The Dynamics of the Composition of mtDNA Haplotypes of the Ancient Population of the Altai Mountains from the Early Bronze Age (3rd Millennium BC) to the Iron Age (2nd-1st Centuries BC)].

    PubMed

    Gubina, M A; Kulikov, I V; Babenko, V N; Chikisheva, T A; Romaschenko, A G; Voevoda, M I; Molodin, V I

    2016-01-01

    The mtDNA polymorphism in representatives of various archaeological cultures of the Developed Bronze Age, Early Scythian, and Hunnish-Sarmatian periods was analyzed (N = 34). It detected the dominance of Western-Eurasian haplotypes (70.6%) in mtDNA samples from the representatives of the ancient population of the Early Bronze Age--Iron Age on the territory of Altai Mountains. Since the 8th to the 7th centuries BC, a sharp increase was revealed in the Eastern-Eurasian haplogroups A, D, C, andZ (43.75%) as compared to previous cultures (16.7%). The presence of haplotype 223-242-290-319 of haplogroup A8 in Dolgans, Itelmens, Evens, Koryaks, and Yakuts indicates the possible long-term presence of its carriers in areas inhabited by these populations. The prevalence of Western-Eurasian haplotypes is observed not only in the Altai Mountains but also in Central Asia (Kazakhstan) and the South of the Krasnoyarsk Krai. All of the three studied samples from the Western-Eurasian haplogroups were revealed to contain U, H, T, and HV. The ubiquitous presence of haplotypes of haplogroup H and some haplogroups of cluster U (U5al, U4, U2e, and K) in the vast territory from the Yenisei River basin to the Atlantic Ocean may indicate the direction of human settlement, which most likely occurred in the Paleolithic Period from Central Asia. PMID:27183799

  9. Texas Reports 1st U.S. Case of Zika from Travel to Another State

    MedlinePlus

    ... 160450.html Texas Reports 1st U.S. Case of Zika From Travel to Another State Resident had recently ... what appears to be the first case of Zika infection traveling across state lines, Texas health officials ...

  10. 45. MISSISSIPPI, LOWNDES CO. COLUMBUS RAILROAD BRIDGE End of 1st ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    45. MISSISSIPPI, LOWNDES CO. COLUMBUS RAILROAD BRIDGE End of 1st St. S., Columbus, Ms. Turn span from SE. Sarcone Photography, Columbus, Ms. Sep 1978. - Bridges of the Upper Tombigbee River Valley, Columbus, Lowndes County, MS

  11. 46. MISSISSIPPI, LOWNDES CO. COLUMBUS RAILROAD BRIDGE End of 1st ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    46. MISSISSIPPI, LOWNDES CO. COLUMBUS RAILROAD BRIDGE End of 1st St. S., Columbus, Ms. Overall view, from S. Sarcone Photography, Columbus, Ms. Sep 1978. - Bridges of the Upper Tombigbee River Valley, Columbus, Lowndes County, MS

  12. BLOEDNER MONUMENT (32ND INDIANA, 1ST GERMAN MONUMENT), SECTION C, FRONT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    BLOEDNER MONUMENT (32ND INDIANA, 1ST GERMAN MONUMENT), SECTION C, FRONT ELEVATION DETAIL OF GERMAN TEXT. VIEW TO NORTHEAST. - Cave Hill National Cemetery, 701 Baxter Avenue, Louisville, Jefferson County, KY

  13. U.S. Premature Births Rise for 1st Time in 8 Years

    MedlinePlus

    ... 161792.html U.S. Premature Births Rise for 1st Time in 8 Years March of Dimes' report finds ... United States increased in 2015 for the first time in eight years, and rates are especially high ...

  14. 28. ENGINE CLUSTER OF 1ST STAGE OF A SATURN I ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    28. ENGINE CLUSTER OF 1ST STAGE OF A SATURN I ROCKET ENGINE LOCATED ON NORTH SIDE OF STATIC TEST STAND. - Marshall Space Flight Center, Saturn Propulsion & Structural Test Facility, East Test Area, Huntsville, Madison County, AL

  15. Florida Reports 1st Locally Transmitted Zika Infections in U.S.

    MedlinePlus

    ... fullstory_160151.html Florida Reports 1st Locally Transmitted Zika Infections in U.S. 4 cases likely originated from ... apparently experiencing its first local outbreak of the Zika virus, with four human infections reported in South ...

  16. Mars Curriculum for K-12 Science Education, 2nd Edition, Making Tracks on Mars Teacher Resource and Activity Guide

    NASA Astrophysics Data System (ADS)

    Aubele, J. C.; Stanley, J.; Grochowski, A.; Jones, K.; Aragon, J.

    2012-03-01

    A Mars K-12 curriculum, created by the New Mexico Museum of Natural History & Science, is now in 2nd edition DVD, approved by NASA educational review, 508 compliant to ensure accessibility for people with disabilities, and applicable to MSL.

  17. Systems Engineering Approach to Technology Integration for NASA's 2nd Generation Reusable Launch Vehicle

    NASA Technical Reports Server (NTRS)

    Thomas, Dale; Smith, Charles; Thomas, Leann; Kittredge, Sheryl

    2002-01-01

    The overall goal of the 2nd Generation RLV Program is to substantially reduce technical and business risks associated with developing a new class of reusable launch vehicles. NASA's specific goals are to improve the safety of a 2nd generation system by 2 orders of magnitude - equivalent to a crew risk of 1-in-10,000 missions - and decrease the cost tenfold, to approximately $1,000 per pound of payload launched. Architecture definition is being conducted in parallel with the maturating of key technologies specifically identified to improve safety and reliability, while reducing operational costs. An architecture broadly includes an Earth-to-orbit reusable launch vehicle, on-orbit transfer vehicles and upper stages, mission planning, ground and flight operations, and support infrastructure, both on the ground and in orbit. The systems engineering approach ensures that the technologies developed - such as lightweight structures, long-life rocket engines, reliable crew escape, and robust thermal protection systems - will synergistically integrate into the optimum vehicle. To best direct technology development decisions, analytical models are employed to accurately predict the benefits of each technology toward potential space transportation architectures as well as the risks associated with each technology. Rigorous systems analysis provides the foundation for assessing progress toward safety and cost goals. The systems engineering review process factors in comprehensive budget estimates, detailed project schedules, and business and performance plans, against the goals of safety, reliability, and cost, in addition to overall technical feasibility. This approach forms the basis for investment decisions in the 2nd Generation RLV Program's risk-reduction activities. Through this process, NASA will continually refine its specialized needs and identify where Defense and commercial requirements overlap those of civil missions.

  18. Life Cycle Systems Engineering Approach to NASA's 2nd Generation Reusable Launch Vehicle

    NASA Technical Reports Server (NTRS)

    Thomas, Dale; Smith, Charles; Safie, Fayssal; Kittredge, Sheryl

    2002-01-01

    The overall goal of the 2nd Generation RLV Program is to substantially reduce technical and business risks associated with developing a new class of reusable launch vehicles. NASA's specific goals are to improve the safety of a 2nd- generation system by 2 orders of magnitude - equivalent to a crew risk of 1 -in- 10,000 missions - and decrease the cost tenfold, to approximately $1,000 per pound of payload launched. Architecture definition is being conducted in parallel with the maturating of key technologies specifically identified to improve safety and reliability, while reducing operational costs. An architecture broadly includes an Earth-to-orbit reusable launch vehicle, on-orbit transfer vehicles and upper stages, mission planning, ground and flight operations, and support infrastructure, both on the ground and in orbit. The systems engineering approach ensures that the technologies developed - such as lightweight structures, long-life rocket engines, reliable crew escape, and robust thermal protection systems - will synergistically integrate into the optimum vehicle. Given a candidate architecture that possesses credible physical processes and realistic technology assumptions, the next set of analyses address the system's functionality across the spread of operational scenarios characterized by the design reference missions. The safety/reliability and cost/economics associated with operating the system will also be modeled and analyzed to answer the questions "How safe is it?" and "How much will it cost to acquire and operate?" The systems engineering review process factors in comprehensive budget estimates, detailed project schedules, and business and performance plans, against the goals of safety, reliability, and cost, in addition to overall technical feasibility. This approach forms the basis for investment decisions in the 2nd Generation RLV Program's risk-reduction activities. Through this process, NASA will continually refine its specialized needs and

  19. Systems Engineering Approach to Technology Integration for NASA's 2nd Generation Reusable Launch Vehicle

    NASA Technical Reports Server (NTRS)

    Thomas, Dale; Smith, Charles; Thomas, Leann; Kittredge, Sheryl

    2002-01-01

    The overall goal of the 2nd Generation RLV Program is to substantially reduce technical and business risks associated with developing a new class of reusable launch vehicles. NASA's specific goals are to improve the safety of a 2nd-generation system by 2 orders of magnitude - equivalent to a crew risk of 1-in-10,000 missions - and decrease the cost tenfold, to approximately $1,000 per pound of payload launched. Architecture definition is being conducted in parallel with the maturating of key technologies specifically identified to improve safety and reliability, while reducing operational costs. An architecture broadly includes an Earth-to-orbit reusable launch vehicle, on-orbit transfer vehicles and upper stages, mission planning, ground and flight operations, and support infrastructure, both on the ground and in orbit. The systems engineering approach ensures that the technologies developed - such as lightweight structures, long-life rocket engines, reliable crew escape, and robust thermal protection systems - will synergistically integrate into the optimum vehicle. To best direct technology development decisions, analytical models are employed to accurately predict the benefits of each technology toward potential space transportation architectures as well as the risks associated with each technology. Rigorous systems analysis provides the foundation for assessing progress toward safety and cost goals. The systems engineering review process factors in comprehensive budget estimates, detailed project schedules, and business and performance plans, against the goals of safety, reliability, and cost, in addition to overall technical feasibility. This approach forms the basis for investment decisions in the 2nd Generation RLV Program's risk-reduction activities. Through this process, NASA will continually refine its specialized needs and identify where Defense and commercial requirements overlap those of civil missions.

  20. PREFACE: 2nd International Conference on Innovative Materials, Structures and Technologies

    NASA Astrophysics Data System (ADS)

    Ručevskis, Sandris

    2015-11-01

    The 2nd International Conference on Innovative Materials, Structures and Technologies (IMST 2015) took place in Riga, Latvia from 30th September - 2nd October, 2015. The first event of the conference series, dedicated to the 150th anniversary of the Faculty of Civil Engineering of Riga Technical University, was held in 2013. Following the established tradition, the aim of the conference was to promote and discuss the latest results of industrial and academic research carried out in the following engineering fields: analysis and design of advanced structures and buildings; innovative, ecological and energy efficient building materials; maintenance, inspection and monitoring methods; construction technologies; structural management; sustainable and safe transport infrastructure; and geomatics and geotechnics. The conference provided an excellent opportunity for leading researchers, representatives of the industrial community, engineers, managers and students to share the latest achievements, discuss recent advances and highlight the current challenges. IMST 2015 attracted over 120 scientists from 24 countries. After rigorous reviewing, over 80 technical papers were accepted for publication in the conference proceedings. On behalf of the organizing committee I would like to thank all the speakers, authors, session chairs and reviewers for their efficient and timely effort. The 2nd International Conference on Innovative Materials, Structures and Technologies was organized by the Faculty of Civil Engineering of Riga Technical University with the support of the Latvia State Research Programme under the grant agreement "INNOVATIVE MATERIALS AND SMART TECHNOLOGIES FOR ENVIRONMENTAL SAFETY, IMATEH". I would like to express sincere gratitude to Juris Smirnovs, Dean of the Faculty of Civil Engineering, and Andris Chate, manager of the Latvia State Research Programme. Finally, I would like to thank all those who helped to make this event happen. Special thanks go to Diana

  1. [Model and enlightenment from rescue of August 2nd Kunshan explosion casualty].

    PubMed

    Tan, Q; Qiu, H B; Sun, B W; Shen, Y M; Nie, L J; Zhang, H W

    2016-01-01

    On August 2nd, 2014, a massive dust explosion occurred in a factory of Kunshan, resulting in a mass casualty involving 185 burn patients. They were transported to 20 medical institutions in Jiangsu province and Shanghai. More than one thousand of medical personnel of our country participated in this emergency rescue, and satisfactory results were achieved. In this paper, the characteristics of this accident were analyzed, the positive effects of interdisciplinary cooperation were affirmed, and the contingency plan, rescue process and pattern, and reserve, organization and management of talents during this rescue process were reviewed retrospectively.

  2. Advanced Electron Beam Ion Sources (EBIS) for 2-nd generation carbon radiotherapy facilities

    NASA Astrophysics Data System (ADS)

    Shornikov, A.; Wenander, F.

    2016-04-01

    In this work we analyze how advanced Electron Beam Ion Sources (EBIS) can facilitate the progress of carbon therapy facilities. We will demonstrate that advanced ion sources enable operation of 2-nd generation ion beam therapy (IBT) accelerators. These new accelerator concepts with designs dedicated to IBT provide beams better suited for therapy and, are more cost efficient than contemporary IBT facilities. We will give a sort overview of the existing new IBT concepts and focus on those where ion source technology is the limiting factor. We will analyse whether this limitation can be overcome in the near future thanks to ongoing EBIS development.

  3. [Model and enlightenment from rescue of August 2nd Kunshan explosion casualty].

    PubMed

    Tan, Q; Qiu, H B; Sun, B W; Shen, Y M; Nie, L J; Zhang, H W

    2016-01-01

    On August 2nd, 2014, a massive dust explosion occurred in a factory of Kunshan, resulting in a mass casualty involving 185 burn patients. They were transported to 20 medical institutions in Jiangsu province and Shanghai. More than one thousand of medical personnel of our country participated in this emergency rescue, and satisfactory results were achieved. In this paper, the characteristics of this accident were analyzed, the positive effects of interdisciplinary cooperation were affirmed, and the contingency plan, rescue process and pattern, and reserve, organization and management of talents during this rescue process were reviewed retrospectively. PMID:27426066

  4. PREFACE: 2nd International Meeting for Researchers in Materials and Plasma Technology

    NASA Astrophysics Data System (ADS)

    Niño, Ely Dannier V.

    2013-11-01

    These proceedings present the written contributions of the participants of the 2nd International Meeting for Researchers in Materials and Plasma Technology, 2nd IMRMPT, which was held from February 27 to March 2, 2013 at the Pontificia Bolivariana Bucaramanga-UPB and Santander and Industrial - UIS Universities, Bucaramanga, Colombia, organized by research groups from GINTEP-UPB, FITEK-UIS. The IMRMPT, was the second version of biennial meetings that began in 2011. The three-day scientific program of the 2nd IMRMPT consisted in 14 Magisterial Conferences, 42 Oral Presentations and 48 Poster Presentations, with the participation of undergraduate and graduate students, professors, researchers and entrepreneurs from Colombia, Russia, France, Venezuela, Brazil, Uruguay, Argentina, Peru, Mexico, United States, among others. Moreover, the objective of IMRMPT was to bring together national and international researchers in order to establish scientific cooperation in the field of materials science and plasma technology; introduce new techniques of surface treatment of materials to improve properties of metals in terms of the deterioration due to corrosion, hydrogen embrittlement, abrasion, hardness, among others; and establish cooperation agreements between universities and industry. The topics covered in the 2nd IMRMPT include New Materials, Surface Physics, Laser and Hybrid Processes, Characterization of Materials, Thin Films and Nanomaterials, Surface Hardening Processes, Wear and Corrosion / Oxidation, Modeling, Simulation and Diagnostics, Plasma Applications and Technologies, Biomedical Coatings and Surface Treatments, Non Destructive Evaluation and Online Process Control, Surface Modification (Ion Implantation, Ion Nitriding, PVD, CVD). The editors hope that those interested in the are of materials science and plasma technology, enjoy the reading that reflect a wide range of topics. It is a pleasure to thank the sponsors and all the participants and contributors for

  5. Easy Glide in a Coarse-Grained Mg-2Zn-2Nd Alloy

    NASA Astrophysics Data System (ADS)

    Wang, Tong; Jonas, John J.; Yue, Stephen

    2016-10-01

    Compression tests were performed at 673 K (400 °C) on a Mg-2Zn-2Nd alloy at the strain rates of 0.1, 0.01, and 0.001/s. The 0.1 and 0.01/s flow curves displayed work hardening to a peak stress at around 0.2 true strain. However, testing at 0.001/s led to steady-state flow at about 22 MPa from 0.03 true strain onwards. Such a steady-state flow is attributed to the predominance of basal slip under these conditions.

  6. Easy Glide in a Coarse-Grained Mg-2Zn-2Nd Alloy

    NASA Astrophysics Data System (ADS)

    Wang, Tong; Jonas, John J.; Yue, Stephen

    2016-08-01

    Compression tests were performed at 673 K (400 °C) on a Mg-2Zn-2Nd alloy at the strain rates of 0.1, 0.01, and 0.001/s. The 0.1 and 0.01/s flow curves displayed work hardening to a peak stress at around 0.2 true strain. However, testing at 0.001/s led to steady-state flow at about 22 MPa from 0.03 true strain onwards. Such a steady-state flow is attributed to the predominance of basal slip under these conditions.

  7. Effects of Thermal Cycling on Control and Irradiated EPC 2nd Generation GaN FETs

    NASA Technical Reports Server (NTRS)

    Patterson, Richard L.; Scheick, Leif; Lauenstein, Jean-Marie; Casey, Megan; Hammoud, Ahmad

    2013-01-01

    The power systems for use in NASA space missions must work reliably under harsh conditions including radiation, thermal cycling, and exposure to extreme temperatures. Gallium nitride semiconductors show great promise, but information pertaining to their performance is scarce. Gallium nitride N-channel enhancement-mode field effect transistors made by EPC Corporation in a 2nd generation of manufacturing were exposed to radiation followed by long-term thermal cycling in order to address their reliability for use in space missions. Results of the experimental work are presented and discussed.

  8. Development of self-recognition, personal pronoun use, and pretend play during the 2nd year.

    PubMed

    Lewis, Michael; Ramsay, Douglas

    2004-01-01

    This study examined the relation of visual self-recognition to personal pronoun use and pretend play. For a longitudinal sample (N=66) at the ages when self-recognition was emerging (15, 18, and 21 months), self-recognition was related to personal pronoun use and pretend play such that children showing self-recognition used more personal pronouns and demonstrated more advanced pretend play than did children not showing self-recognition. The finding of a relation among these measures provides additional evidence that in the middle of the 2nd year of life a metarepresentation of self emerges in the human child.

  9. Conditional Lethal Mutants of Adenovirus 2-Simian Virus 40 Hybrids I. Host Range Mutants of Ad2+ND1

    PubMed Central

    Grodzicker, Terri; Anderson, Carl; Sharp, Phillip A.; Sambrook, Joe

    1974-01-01

    Human adenovirus type 2 (Ad2) grows poorly in monkey cells, although this defect can be overcome by co-infection with simian virus 40 (SV40). The nondefective Ad2-SV40 hybrid virus, Ad2+ND1, replicates efficiently in both human and African green monkey kidney cells, presumably due to the insertion of SV40 sequences into the Ad2 DNA. Several mutants of Ad2+ND1 have been isolated that grow and plaque poorly in monkey cells, although they retain the ability to replicate and plaque efficiently in HeLa cells. One of these mutants (H39) has been examined in detail. Studies comparing the DNA of the mutant with Ad2+ND1 either by the cleavage patterns produced by Escherichia coli R·RI restriction endonuclease digestion or by heteroduplexing reveal no differences. The pattern of protein synthesis of Ad2+ND1 and H39 in monkey cells is quite different with the mutant resembling Ad2, which is defective in the synthesis of late proteins. However, in human cells, the proteins synthesized by H39 and the parent Ad2+ND1 are very similar. The production of SV40 U antigen in H39-infected cells is different from that in Ad2+ND1-infected cells. Finally, the growth of H39 in monkey cells can be complemented by SV40. Images PMID:4364898

  10. Editorial: 2nd Special Issue on behavior change, health, and health disparities

    PubMed Central

    Higgins, Stephen T.

    2016-01-01

    This Special Issue of Preventive Medicine (PM) is the 2nd that we have organized on behavior change, health, and health disparities. This is a topic of fundamental importance to improving population health in the U.S. and other industrialized countries that are trying to more effectively manage chronic health conditions. There is broad scientific consensus that personal behavior patterns such as cigarette smoking, other substance abuse, and physical inactivity/obesity are among the most important modifiable causes of chronic disease and its adverse impacts on population health. As such behavior change needs to be a key component of improving population health. There is also broad agreement that while these problems extend across socioeconomic strata, they are overrepresented among more economically disadvantaged populations and contribute directly to the growing problem of health disparities. Hence, behavior change represents an essential step in curtailing that unsettling problem as well. In this 2nd Special Issue, we devote considerable space to the current U.S. prescription opioid addiction epidemic, a crisis that was not addressed in the prior Special Issue. We also continue to devote attention to the two largest contributors to preventable disease and premature death, cigarette smoking and physical inactivity/obesity as well as risks of co-occurrence of these unhealthy behavior patterns. Across each of these topics we included contributions from highly accomplished policymakers and scientists to acquaint readers with recent accomplishments as well as remaining knowledge gaps and challenges to effectively managing these important chronic health problems. PMID:26257372

  11. [How to read and understand Registries for Evaluating Patient Outcomes: A User's Guide (2nd Edition)].

    PubMed

    Yang, Wei; Xie, Yan-Ming

    2013-09-01

    Registry studies (RS) get more and more attention in recent years because it can reflect the health care situations of the real world. There are a number of large scale RS for traditional Chinese medicine (TCM). RS are observational studies that can complement randomized controlled trials (RCT). RS have an irreplaceable position in real word study (RWS), especially for small probability events. There are some different characters and qualities in RS. Registries for Evaluating Patient Outcomes: A User's Guide (2nd Edition) was published by the agency for healthcare research and quality (AHRQ) in 2010. It described the details of how to establish, maintain, and evaluate RS, and using 38 RS samples to illustrate the possible problems in undertaking such research. The User's Guide (2nd Edition) provides a reliable reference document for RS. TCM injections post-marketing safety surveillance RS is a national program involving multiple centers in China. This program can further improve RS quality their application in China and is a good illustration of how to follow this guide accurately. PMID:24471311

  12. Efficacy and Safety of rAAV2-ND4 Treatment for Leber's Hereditary Optic Neuropathy.

    PubMed

    Wan, Xing; Pei, Han; Zhao, Min-jian; Yang, Shuo; Hu, Wei-kun; He, Heng; Ma, Si-qi; Zhang, Ge; Dong, Xiao-yan; Chen, Chen; Wang, Dao-wen; Li, Bin

    2016-02-19

    Leber's hereditary optic neuropathy (LHON) is a mitochondrially inherited disease leading to blindness. A mitochondrial DNA point mutation at the 11778 nucleotide site of the NADH dehydrogenase subunit 4 (ND4) gene is the most common cause. The aim of this study was to evaluate the efficacy and safety of a recombinant adeno-associated virus 2 (AAV2) carrying ND4 (rAAV2-ND4) in LHON patients carrying the G11778A mutation. Nine patients were administered rAAV2-ND4 by intravitreal injection to one eye and then followed for 9 months. Ophthalmologic examinations of visual acuity, visual field, and optical coherence tomography were performed. Physical examinations included routine blood and urine. The visual acuity of the injected eyes of six patients improved by at least 0.3 log MAR after 9 months of follow-up. In these six patients, the visual field was enlarged but the retinal nerve fibre layer remained relatively stable. No other outcome measure was significantly changed. None of the nine patients had local or systemic adverse events related to the vector during the 9-month follow-up period. These findings support the feasible use of gene therapy for LHON.

  13. Efficacy and Safety of rAAV2-ND4 Treatment for Leber's Hereditary Optic Neuropathy.

    PubMed

    Wan, Xing; Pei, Han; Zhao, Min-jian; Yang, Shuo; Hu, Wei-kun; He, Heng; Ma, Si-qi; Zhang, Ge; Dong, Xiao-yan; Chen, Chen; Wang, Dao-wen; Li, Bin

    2016-01-01

    Leber's hereditary optic neuropathy (LHON) is a mitochondrially inherited disease leading to blindness. A mitochondrial DNA point mutation at the 11778 nucleotide site of the NADH dehydrogenase subunit 4 (ND4) gene is the most common cause. The aim of this study was to evaluate the efficacy and safety of a recombinant adeno-associated virus 2 (AAV2) carrying ND4 (rAAV2-ND4) in LHON patients carrying the G11778A mutation. Nine patients were administered rAAV2-ND4 by intravitreal injection to one eye and then followed for 9 months. Ophthalmologic examinations of visual acuity, visual field, and optical coherence tomography were performed. Physical examinations included routine blood and urine. The visual acuity of the injected eyes of six patients improved by at least 0.3 log MAR after 9 months of follow-up. In these six patients, the visual field was enlarged but the retinal nerve fibre layer remained relatively stable. No other outcome measure was significantly changed. None of the nine patients had local or systemic adverse events related to the vector during the 9-month follow-up period. These findings support the feasible use of gene therapy for LHON. PMID:26892229

  14. 19. Historic American Buildings Survey L. C. Durette, Photographer REAR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    19. Historic American Buildings Survey L. C. Durette, Photographer REAR STAIRS 1st. & 2nd. FLOOR SHOWING POST OF CHIMNEY GIRT - Doe Garrison, Lamprey River & Great Bay, Newmarket, Rockingham County, NH

  15. 20. Historic American Buildings Survey L. C. Durette, Photographer REAR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    20. Historic American Buildings Survey L. C. Durette, Photographer REAR STAIRS 1st. TO 2nd. FLOOR SHOWING POST OF CHIMNEY GIRT & OVERHANG - Doe Garrison, Lamprey River & Great Bay, Newmarket, Rockingham County, NH

  16. Scoping analysis of the Advanced Test Reactor using SN2ND

    SciTech Connect

    Wolters, E.; Smith, M.

    2012-07-26

    A detailed set of calculations was carried out for the Advanced Test Reactor (ATR) using the SN2ND solver of the UNIC code which is part of the SHARP multi-physics code being developed under the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program in DOE-NE. The primary motivation of this work is to assess whether high fidelity deterministic transport codes can tackle coupled dynamics simulations of the ATR. The successful use of such codes in a coupled dynamics simulation can impact what experiments are performed and what power levels are permitted during those experiments at the ATR. The advantages of the SN2ND solver over comparable neutronics tools are its superior parallel performance and demonstrated accuracy on large scale homogeneous and heterogeneous reactor geometries. However, it should be noted that virtually no effort from this project was spent constructing a proper cross section generation methodology for the ATR usable in the SN2ND solver. While attempts were made to use cross section data derived from SCALE, the minimal number of compositional cross section sets were generated to be consistent with the reference Monte Carlo input specification. The accuracy of any deterministic transport solver is impacted by such an approach and clearly it causes substantial errors in this work. The reasoning behind this decision is justified given the overall funding dedicated to the task (two months) and the real focus of the work: can modern deterministic tools actually treat complex facilities like the ATR with heterogeneous geometry modeling. SN2ND has been demonstrated to solve problems with upwards of one trillion degrees of freedom which translates to tens of millions of finite elements, hundreds of angles, and hundreds of energy groups, resulting in a very high-fidelity model of the system unachievable by most deterministic transport codes today. A space-angle convergence study was conducted to determine the meshing and angular cubature

  17. Cooling Floor AC Systems

    NASA Astrophysics Data System (ADS)

    Jun, Lu; Hao, Ding; Hong, Zhang; Ce, Gao Dian

    The present HVAC equipments for the residential buildings in the Hot-summer-and-Cold-winter climate region are still at a high energy consuming level. So that the high efficiency HVAC system is an urgently need for achieving the preset government energy saving goal. With its advantage of highly sanitary, highly comfortable and uniform of temperature field, the hot-water resource floor radiation heating system has been widely accepted. This paper has put forward a new way in air-conditioning, which combines the fresh-air supply unit and such floor radiation system for the dehumidification and cooling in summer or heating in winter. By analyze its advantages and limitations, we found that this so called Cooling/ Heating Floor AC System can improve the IAQ of residential building while keep high efficiency quality. We also recommend a methodology for the HVAC system designing, which will ensure the reduction of energy cost of users.

  18. STARS 2.0: 2nd-generation open-source archiving and query software

    NASA Astrophysics Data System (ADS)

    Winegar, Tom

    2008-07-01

    The Subaru Telescope is in process of developing an open-source alternative to the 1st-generation software and databases (STARS 1) used for archiving and query. For STARS 2, we have chosen PHP and Python for scripting and MySQL as the database software. We have collected feedback from staff and observers, and used this feedback to significantly improve the design and functionality of our future archiving and query software. Archiving - We identified two weaknesses in 1st-generation STARS archiving software: a complex and inflexible table structure and uncoordinated system administration for our business model: taking pictures from the summit and archiving them in both Hawaii and Japan. We adopted a simplified and normalized table structure with passive keyword collection, and we are designing an archive-to-archive file transfer system that automatically reports real-time status and error conditions and permits error recovery. Query - We identified several weaknesses in 1st-generation STARS query software: inflexible query tools, poor sharing of calibration data, and no automatic file transfer mechanisms to observers. We are developing improved query tools and sharing of calibration data, and multi-protocol unassisted file transfer mechanisms for observers. In the process, we have redefined a 'query': from an invisible search result that can only transfer once in-house right now, with little status and error reporting and no error recovery - to a stored search result that can be monitored, transferred to different locations with multiple protocols, reporting status and error conditions and permitting recovery from errors.

  19. Direct and non-destructive proof of authenticity for the 2nd generation of Brazilian real banknotes via easy ambient sonic spray ionization mass spectrometry.

    PubMed

    Schmidt, Eduardo Morgado; Franco, Marcos Fernando; Regino, Karen Gomes; Lehmann, Eraldo Luiz; Arruda, Marco Aurélio Zezzi; de Carvalho Rocha, Werickson Fortunato; Borges, Rodrigo; de Souza, Wanderley; Eberlin, Marcos Nogueira; Correa, Deleon Nascimento

    2014-12-01

    Using a desorption/ionization technique, easy ambient sonic-spray ionization coupled to mass spectrometry (EASI-MS), documents related to the 2nd generation of Brazilian Real currency (R$) were screened in the positive ion mode for authenticity based on chemical profiles obtained directly from the banknote surface. Characteristic profiles were observed for authentic, seized suspect counterfeit and counterfeited homemade banknotes from inkjet and laserjet printers. The chemicals in the authentic banknotes' surface were detected via a few minor sets of ions, namely from the plasticizers bis(2-ethylhexyl)phthalate (DEHP) and dibutyl phthalate (DBP), most likely related to the official offset printing process, and other common quaternary ammonium cations, presenting a similar chemical profile to 1st-generation R$. The seized suspect counterfeit banknotes, however, displayed abundant diagnostic ions in the m/z 400-800 range due to the presence of oligomers. High-accuracy FT-ICR MS analysis enabled molecular formula assignment for each ion. The ions were separated by 44 m/z, which enabled their characterization as Surfynol® 4XX (S4XX, XX=40, 65, and 85), wherein increasing XX values indicate increasing amounts of ethoxylation on a backbone of 2,4,7,9-tetramethyl-5-decyne-4,7-diol (Surfynol® 104). Sodiated triethylene glycol monobutyl ether (TBG) of m/z 229 (C10H22O4Na) was also identified in the seized counterfeit banknotes via EASI(+) FT-ICR MS. Surfynol® and TBG are constituents of inks used for inkjet printing.

  20. Highly efficient -1st-order reflection in Littrow mounted dielectric double-groove grating

    NASA Astrophysics Data System (ADS)

    Ito, Kota; Iizuka, Hideo

    2013-06-01

    We show that in a silicon double-groove grating with two different groove widths per period attached on top of a semi-infinite SiO2 substrate, almost 100% reflectivity is achieved for the -1st-order reflection with an incident angle of 60° in the Littrow mounting condition. The modal analysis reveals that modes propagating in the upward and downward directions have nearly the same amplitudes at resonance. They are added constructively for the -1st-order reflection and destructively for the 0th-order reflection and the -1st-order and 0th-order transmission. The asymmetric structure with a dielectric material poses a unique feature as a four port device.

  1. 5. Interior, second floor. Pressed metal ceiling, and wooden floors ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. Interior, second floor. Pressed metal ceiling, and wooden floors visible. Overhead light source toward rear of building indicates location of skylight. - 25-27 East Hanover Street (Commercial Building), 25-27 East Hanover Street, Trenton, Mercer County, NJ

  2. Two and Three Bedroom Units: First Floor Plan, Second Floor ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Two and Three Bedroom Units: First Floor Plan, Second Floor Plan, South Elevation (As Built), North Elevation (As Built), East Elevation (As Built), East Elevation (Existing), North Elevation (Existing) - Aluminum City Terrace, East Hill Drive, New Kensington, Westmoreland County, PA

  3. STIRLING'S QUARTERS SMALL BARN: FIRST FLOOR PLAN; SECOND FLOOR PLAN; ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    STIRLING'S QUARTERS SMALL BARN: FIRST FLOOR PLAN; SECOND FLOOR PLAN; SOUTH ELEVATION; EAST ELEVATION; NORTH ELEVATION; WEST ELEVATION. - Stirling's Quarters, 555 Yellow Springs Road, Tredyffrin Township, Valley Forge, Chester County, PA

  4. 16. STATIC TEST TOWER REMOVABLE FLOOR LEVEL VIEW OF FLOOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    16. STATIC TEST TOWER REMOVABLE FLOOR LEVEL VIEW OF FLOOR THAT FOLDS BACK TO ALLOW ROCKET PLACEMENT. - Marshall Space Flight Center, Saturn Propulsion & Structural Test Facility, East Test Area, Huntsville, Madison County, AL

  5. PREFACE: PAGES 1st Young Scientists Meeting (YSM) - 'Retrospective views on our planet's future'

    NASA Astrophysics Data System (ADS)

    Margrethe Basse, Ellen

    2010-03-01

    more recent pollution. The concept and format of the 1st PAGES YSM worked very well, and created a high degree of enthusiasm and stimulation among the participants (as is demonstrated by this special issue). The 2nd YSM is therefore firmly planned to take place in 2013, back-to-back with the 4th PAGES OSM. Crucial and gratefully acknowledged contributions to the success of the YSM were made by the numerous co-sponsors (see logos below), who provided the financial basis for the YSM and supported the attendance of many early-career researchers from various parts of the world. Furthermore, we cordially thank all reviewers for shaping this proceeding issue with their insightful and helpful reviews. Conference photograph

  6. The New 2nd-Generation SRF R&D Facility at Jefferson Lab: TEDF

    SciTech Connect

    Reece, Charles E.; Reilly, Anthony V.

    2012-09-01

    The US Department of Energy has funded a near-complete renovation of the SRF-based accelerator research and development facilities at Jefferson Lab. The project to accomplish this, the Technical and Engineering Development Facility (TEDF) Project has completed the first of two phases. An entirely new 3,100 m{sup 2} purpose-built SRF technical work facility has been constructed and was occupied in summer of 2012. All SRF work processes with the exception of cryogenic testing have been relocated into the new building. All cavity fabrication, processing, thermal treatment, chemistry, cleaning, and assembly work is collected conveniently into a new LEED-certified building. An innovatively designed 800 m2 cleanroom/chemroom suite provides long-term flexibility for support of multiple R&D and construction projects as well as continued process evolution. The characteristics of this first 2nd-generation SRF facility are described.

  7. A Perpendicular Biased 2nd Harmonic Cavity for the Fermilab Booster

    SciTech Connect

    Tan, C. Y.; Dey, J.; Madrak, R. L.; Pellico, W.; Romanov, G.; Sun, D.; Terechkine, I.

    2015-07-13

    A perpendicular biased 2nd harmonic cavity is currently being designed for the Fermilab Booster. Its purpose cavity is to flatten the bucket at injection and thus change the longitudinal beam distribution so that space charge effects are decreased. It can also with transition crossing. The reason for the choice of perpendicular biasing over parallel biasing is that the Q of the cavity is much higher and thus allows the accelerating voltage to be a factor of two higher than a similar parallel biased cavity. This cavity will also provide a higher accelerating voltage per meter than the present folded transmission line cavity. However, this type of cavity presents technical challenges that need to be addressed. The two major issues are cooling of the garnet material from the effects of the RF and the cavity itself from eddy current heating because of the 15 Hz bias field ramp. This paper will address the technical challenge of preventing the garnet from overheating.

  8. Automated CFD Database Generation for a 2nd Generation Glide-Back-Booster

    NASA Technical Reports Server (NTRS)

    Chaderjian, Neal M.; Rogers, Stuart E.; Aftosmis, Michael J.; Pandya, Shishir A.; Ahmad, Jasim U.; Tejmil, Edward

    2003-01-01

    A new software tool, AeroDB, is used to compute thousands of Euler and Navier-Stokes solutions for a 2nd generation glide-back booster in one week. The solution process exploits a common job-submission grid environment using 13 computers located at 4 different geographical sites. Process automation and web-based access to the database greatly reduces the user workload, removing much of the tedium and tendency for user input errors. The database consists of forces, moments, and solution files obtained by varying the Mach number, angle of attack, and sideslip angle. The forces and moments compare well with experimental data. Stability derivatives are also computed using a monotone cubic spline procedure. Flow visualization and three-dimensional surface plots are used to interpret and characterize the nature of computed flow fields.

  9. Enabling the 2nd Generation in Space: Building Blocks for Large Scale Space Endeavours

    NASA Astrophysics Data System (ADS)

    Barnhardt, D.; Garretson, P.; Will, P.

    Today the world operates within a "first generation" space industrial enterprise, i.e. all industry is on Earth, all value from space is from bits (data essentially), and the focus is Earth-centric, with very limited parts of our population and industry participating in space. We are limited in access, manoeuvring, on-orbit servicing, in-space power, in-space manufacturing and assembly. The transition to a "Starship culture" requires the Earth to progress to a "second generation" space industrial base, which implies the need to expand the economic sphere of activity of mankind outside of an Earth-centric zone and into CIS-lunar space and beyond, with an equal ability to tap the indigenous resources in space (energy, location, materials) that will contribute to an expanding space economy. Right now, there is no comfortable place for space applications that are not discovery science, exploration, military, or established earth bound services. For the most part, space applications leave out -- or at least leave nebulous, unconsolidated, and without a critical mass -- programs and development efforts for infrastructure, industrialization, space resources (survey and process maturation), non-traditional and persistent security situational awareness, and global utilities -- all of which, to a far greater extent than a discovery and exploration program, may help determine the elements of a 2nd generation space capability. We propose a focus to seed the pre-competitive research that will enable global industry to develop the necessary competencies that we currently lack to build large scale space structures on-orbit, that in turn would lay the foundation for long duration spacecraft travel (i.e. key technologies in access, manoeuvrability, etc.). This paper will posit a vision-to-reality for a step wise approach to the types of activities the US and global space providers could embark upon to lay the foundation for the 2nd generation of Earth in space.

  10. Minimally Invasive Arthrodesis of 1st Metatarsophalangeal Joint for Hallux Rigidus.

    PubMed

    Sott, A H

    2016-09-01

    First metatarsophalangeal joint arthrodesis plays a significant role in the management of symptomatic hallux rigidus/osteoarthritis of the 1st metatarsophalangeal joint. Several open and few percutaneous techniques have been described in the literature. This article describes and discusses a percutaneous technique that has been successfully used to achieve a pain-free stable and functional 1st metatarsophalangeal joint. All aspects of surgical indication and operative technique and details of patient-reported outcomes are presented with a referenced discussion. PMID:27524706

  11. CAST FLOOR WITH VIEW OF TORPEDO LADLE (BENEATH CAST FLOOR) ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    CAST FLOOR WITH VIEW OF TORPEDO LADLE (BENEATH CAST FLOOR) AND KEEPERS OF THE CAST HOUSE FLOOR, S.L. KIMBROUGH AND DAVID HOLMES. - U.S. Steel, Fairfield Works, Blast Furnace No. 8, North of Valley Road, West of Ensley-Pleasant Grove Road, Fairfield, Jefferson County, AL

  12. The relationship between the carrying angle and the distal extent of the 2nd and 4th fingertips.

    PubMed

    Sönmez, M; Tattemur, Y; Karacan, K; Erdal, M

    2012-08-01

    The angle towards the lateral side between the arm and forearm when the forearm is in full extension and supination is defined as the carrying angle. It is well known that the 2nd finger is longer in women whereas the 4th finger is longer in men, due to in-utero hormonal effects. In the present study, the relationship between the carrying angle and the distal extent of the 2nd and 4th fingertips is studied. The findings reveal that the carrying angle was greater both in left and right sides in women than in men. In addition, while the distal extent of the 2nd fingertips was longer in women, the 4th fingertip was longer in men. There was a moderately positive correlation between the carrying angle and the distal fingertip lengths. Therefore, it could be suggested that the morphometric factors play role on the distal extent of the fingertips other than the hormonal effects.

  13. 130. Post1911. Photograph labeled, 'SEASON 1913. CAPTAIN, 1st MATE, SUPT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    130. Post-1911. Photograph labeled, 'SEASON 1913. CAPTAIN, 1st MATE, SUPT AND STOREKEEPER, A.P. ASS'N CANNERY, SHIP STAR OF ALASKA.' View forward from mizzenmast, post side. - Ship BALCLUTHA, 2905 Hyde Street Pier, San Francisco, San Francisco County, CA

  14. 47. MISSISSIPPI, LOWNDES CO. COLUMBUS RAILROAD BRIDGE End of 1st ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    47. MISSISSIPPI, LOWNDES CO. COLUMBUS RAILROAD BRIDGE End of 1st St. S., Columbus, Ms. Latching mechanism, E end of turn span, viewed from W. Sarcone Photography, Columbus, Ms. Sep 1978. - Bridges of the Upper Tombigbee River Valley, Columbus, Lowndes County, MS

  15. 42. MISSISSIPPI, LOWNDES CO. COLUMBUS RAILROAD BRIDGE End of 1st ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    42. MISSISSIPPI, LOWNDES CO. COLUMBUS RAILROAD BRIDGE End of 1st St. S., Columbus, Ms. Copy of postcard ca. 1900. Copy owned and made by Jack Donnell, Columbus, Ms. Shows two-span steel truss, built by Phoenix Bridge Co. in 1878. Negative copied by: Sarcone Photography, Columbus, Ms. Sep 1978. - Bridges of the Upper Tombigbee River Valley, Columbus, Lowndes County, MS

  16. 48. MISSISSIPPI, LOWNDES CO. COLUMBUS RAILROAD BRIDGE End of 1st ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    48. MISSISSIPPI, LOWNDES CO. COLUMBUS RAILROAD BRIDGE End of 1st St. S., Columbus, Ms Latching mechanism, E end of turn span, view from N. Sarcone Photography, Columbus, MS. Sep 1978. - Bridges of the Upper Tombigbee River Valley, Columbus, Lowndes County, MS

  17. 49. MISSISSIPPI, LOWNDES CO. COLUMBUS RAILROAD BRIDGE End of 1st ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    49. MISSISSIPPI, LOWNDES CO. COLUMBUS RAILROAD BRIDGE End of 1st St. S., Columbus, Ms. Top of pier and underside of w end of turn span. Sarcone Photography, Columbus, Ms. Sep 1978. - Bridges of the Upper Tombigbee River Valley, Columbus, Lowndes County, MS

  18. The Student View of 1st Year Laboratory Work in the Biosciences--Score Gamma?

    ERIC Educational Resources Information Center

    Collis, Mike; Gibson, Alan; Hughes, Ian; Sayers, Gill; Todd, Martin

    2008-01-01

    Students registered on 1st year bioscience courses in 9 universities were surveyed for their views on the laboratory classes they were taking. Returns were obtained from 695 (70%). Student views were varied, some viewing particular features of laboratory classes as "good" while others viewed the same features as "bad". Students identified as the…

  19. How Many Attempts Until Success in Some Core 1st. Year Disciplines?

    ERIC Educational Resources Information Center

    Fernandes, Graça Leão; Andrade e Silva, João; Lopes, Margarida Chagas

    2012-01-01

    Due to a general development in education brought about by democracy, Portugal has witnessed tremendous development in Higher Education (HE) since the beginning of the 1980s. Nevertheless, the percentage of graduates among the Portuguese population still ranks far below most European countries. This is why academic performance in HE 1st cycle…

  20. First-Generation College Students' 1st-Year College Experiences: Challenges Attending a Private University

    ERIC Educational Resources Information Center

    Reid, Josephine

    2013-01-01

    First-generation college students (FGCS) face challenges when switching from high school to college and during their 1st-year in college. Additionally, FGCS may have difficulty understanding the steps required to prepare for and enroll in postsecondary education. The social capital theory examines support of social, academic, and cultural networks…

  1. 77 FR 22574 - Filing Dates for the Washington Special Election In the 1st Congressional District

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-16

    ... From the Federal Register Online via the Government Publishing Office FEDERAL ELECTION COMMISSION Filing Dates for the Washington Special Election In the 1st Congressional District AGENCY: Federal Election Commission. ACTION: Notice of filing dates for special election. SUMMARY: Washington has...

  2. The Course of Psychological Disorders in the 1st Year After Cancer Diagnosis

    ERIC Educational Resources Information Center

    Kangas, Maria; Henry, Jane L.; Bryant, Richard A.

    2005-01-01

    This study investigated the relationship between acute stress disorder (ASD) and posttraumatic stress disorder (PTSD) and comorbid anxiety, depressive, and substance use disorders over the first 12-month period following a cancer diagnosis. Individuals recently diagnosed with 1st onset head and neck or lung malignancy were assessed for ASD within…

  3. Perceptual Narrowing of Linguistic Sign Occurs in the 1st Year of Life

    ERIC Educational Resources Information Center

    Palmer, Stephanie Baker; Fais, Laurel; Golinkoff, Roberta Michnick; Werker, Janet F.

    2012-01-01

    Over their 1st year of life, infants' "universal" perception of the sounds of language narrows to encompass only those contrasts made in their native language (J. F. Werker & R. C. Tees, 1984). This research tested 40 infants in an eyetracking paradigm and showed that this pattern also holds for infants exposed to seen language--American Sign…

  4. Chronic pelvic floor dysfunction.

    PubMed

    Hartmann, Dee; Sarton, Julie

    2014-10-01

    The successful treatment of women with vestibulodynia and its associated chronic pelvic floor dysfunctions requires interventions that address a broad field of possible pain contributors. Pelvic floor muscle hypertonicity was implicated in the mid-1990s as a trigger of major chronic vulvar pain. Painful bladder syndrome, irritable bowel syndrome, fibromyalgia, and temporomandibular jaw disorder are known common comorbidities that can cause a host of associated muscular, visceral, bony, and fascial dysfunctions. It appears that normalizing all of those disorders plays a pivotal role in reducing complaints of chronic vulvar pain and sexual dysfunction. Though the studies have yet to prove a specific protocol, physical therapists trained in pelvic dysfunction are reporting success with restoring tissue normalcy and reducing vulvar and sexual pain. A review of pelvic anatomy and common findings are presented along with suggested physical therapy management.

  5. Polygons on Crater Floor

    NASA Technical Reports Server (NTRS)

    2003-01-01

    MGS MOC Release No. MOC2-357, 11 May 2003

    This Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) picture shows a pattern of polygons on the floor of a northern plains impact crater. These landforms are common on crater floors at high latitudes on Mars. Similar polygons occur in the arctic and antarctic regions of Earth, where they indicate the presence and freeze-thaw cycling of ground ice. Whether the polygons on Mars also indicate water ice in the ground is uncertain. The image is located in a crater at 64.8oN, 292.7oW. Sunlight illuminates the scene from the lower left.

  6. Floor of Hellas Basin

    NASA Technical Reports Server (NTRS)

    2002-01-01

    [figure removed for brevity, see original site]

    With a diameter of roughly 2000 km and a depth of over 7 km, the Hellas Basin is the largest impact feature on Mars. Because of its great depth, there is significantly more atmosphere to peer through in order to see its floor, reducing the quality of the images taken from orbit. This THEMIS image straddles a scarp between the Hellas floor and an accumulation of material at least a half kilometer thick that covers much of the floor. The southern half of the image contains some of this material. Strange ovoid landforms are present here that give the appearance of flow. It is possible that water ice or even liquid water was present in the deposits and somehow responsible for the observed landscape. The floor of Hellas remains a poorly understood portion of the planet that should benefit from the analysis of new THEMIS data.

    Note: this THEMIS visual image has not been radiometrically nor geometrically calibrated for this preliminary release. An empirical correction has been performed to remove instrumental effects. A linear shift has been applied in the cross-track and down-track direction to approximate spacecraft and planetary motion. Fully calibrated and geometrically projected images will be released through the Planetary Data System in accordance with Project policies at a later time.

    NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The Thermal Emission Imaging System (THEMIS) was developed by Arizona State University, Tempe, in collaboration with Raytheon Santa Barbara Remote Sensing. The THEMIS investigation is led by Dr. Philip Christensen at Arizona State University. Lockheed Martin Astronautics, Denver, is the prime contractor for the Odyssey project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in

  7. Modular Flooring System

    NASA Technical Reports Server (NTRS)

    Thate, Robert

    2012-01-01

    The modular flooring system (MFS) was developed to provide a portable, modular, durable carpeting solution for NASA fs Robotics Alliance Project fs (RAP) outreach efforts. It was also designed to improve and replace a modular flooring system that was too heavy for safe use and transportation. The MFS was developed for use as the flooring for various robotics competitions that RAP utilizes to meet its mission goals. One of these competitions, the FIRST Robotics Competition (FRC), currently uses two massive rolls of broadloom carpet for the foundation of the arena in which the robots are contained during the competition. The area of the arena is approximately 30 by 72 ft (approximately 9 by 22 m). This carpet is very cumbersome and requires large-capacity vehicles, and handling equipment and personnel to transport and deploy. The broadloom carpet sustains severe abuse from the robots during a regular three-day competition, and as a result, the carpet is not used again for competition. Similarly, broadloom carpets used for trade shows at convention centers around the world are typically discarded after only one use. This innovation provides a green solution to this wasteful practice. Each of the flooring modules in the previous system weighed 44 lb (.20 kg). The improvements in the overall design of the system reduce the weight of each module by approximately 22 lb (.10 kg) (50 %), and utilize an improved "module-to-module" connection method that is superior to the previous system. The MFS comprises 4-by-4-ft (.1.2-by- 1.2-m) carpet module assemblies that utilize commercially available carpet tiles that are bonded to a lightweight substrate. The substrate surface opposite from the carpeted surface has a module-to-module connecting interface that allows for the modules to be connected, one to the other, as the modules are constructed. This connection is hidden underneath the modules, creating a smooth, co-planar flooring surface. The modules are stacked and strapped

  8. Floor of Baldet Crater

    NASA Technical Reports Server (NTRS)

    2002-01-01

    (Released 13 June 2002) The Science This THEMIS visible image shows a remarkable array of dunes on the floor of a large impact crater named Baldet located near 22.8o N. Many of the dunes in this region are isolated features, with large, sand-free 'interdune' surfaces between the individual dunes. These isolated dunes typically occur in regions where there is a limited supply of sand. Any sand that is present moves rapidly across the interdune surfaces, which in many cases are hardened surfaces over which the sand can easily bounce, or 'saltate.' When this loose sand lands on a dune it cannot travel as quickly and is trapped within the dune. In some areas within this sand mass the dunes have grown together to form crescent dunes and dune ridges. The dunes in this image are likely active today, slowly migrating across the crater floor. THEMIS will re-image this and other dunes throughout the Mars Odyssey mission to search for any evidence of dune motion over time. Based on the asymmetrical shape of the dunes, the wind direction over much of the dune field appears to be from the right (west) or upper right (northwest). However, the topography of the crater floor apparently produces complex wind patterns within the dune field, as can be seen by the different orientations of the dunes. For example the dunes in the lower portion of the image appear to be somewhat symmetrical and aligned east-west, suggesting that the wind in this region blows from both the north (top) and south (bottom). The Story A fuzzy 'carpet' of sand dunes covers the floor of a large impact crater, which you can see almost in full in the context image to the right. While the dunes give this area a plush, tufted look, there actually isn't a lot of sand in this area. How can you tell? Large, sand-free spaces exist in between the dunes, and those usually occur when sand particles are sparse. You can see these 'interdune spaces' better if you click on the image for the more detailed view. The sand that

  9. Conference Proceedings: 2nd European Conference of Rehabilitation International; Disability in the Family. (Brighton, England, September 18-21, 1978)

    ERIC Educational Resources Information Center

    Royal Association for Disability and Rehabilitation, London (England).

    The conference proceedings of the 2nd European Conference of Rehabilitation International (1978) on the theme disability in the family contains the agenda and approximately 80 papers. National presentations consider the theme in papers by representatives of Finland, Hungary, Belgium, The Netherlands, Portugal, Hong Kong, India, The German…

  10. Curriculum on the Edge of Survival: How Schools Fail to Prepare Students for Membership in a Democracy. 2nd Edition

    ERIC Educational Resources Information Center

    Heller, Daniel

    2012-01-01

    Typically, school curriculum has been viewed through the lens of preparation for the workplace or higher education, both worthy objectives. However, this is not the only lens, and perhaps not even the most powerful one to use, if the goal is to optimize the educational system. "Curriculum on the Edge of Survival, 2nd Edition," attempts to define…

  11. Iron metabolism in African American women during the 2nd and 3rd trimester of a high-risk pregnancy

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Objective: To examine iron metabolism during the 2nd and 3rd trimester in African American women classified as a high-risk pregnancy. Design: Longitudinal. Setting: Large, university-based, urban Midwestern medical center. Participants: Convenience sample of 47 African American women classified a...

  12. Report from the 2nd Summer School in Computational Biology organized by the Queen's University of Belfast.

    PubMed

    Emmert-Streib, Frank; Zhang, Shu-Dong; Hamilton, Peter

    2014-12-01

    In this paper, we present a meeting report for the 2nd Summer School in Computational Biology organized by the Queen's University of Belfast. We describe the organization of the summer school, its underlying concept and student feedback we received after the completion of the summer school.

  13. Give It a Shot! Toolkit for Nurses and Other Immunization Champions Working with Secondary Schools. 2nd Edition

    ERIC Educational Resources Information Center

    Boyer-Chu, Lynda; Wooley, Susan F.

    2008-01-01

    Adolescent immunization saves lives--but promoting immunization takes time and thought, and today's nurses and other health advocates are faced with a host of ever-expanding responsibilities in a time of reduced budgets and staff. This toolkit is thus structured as an easy and reliable resource. This 2nd edition contains: (1) a 64-page manual;…

  14. The Influence of Neighborhood Density and Word Frequency on Phoneme Awareness in 2nd and 4th Grades

    ERIC Educational Resources Information Center

    Hogan, Tiffany P.; Bowles, Ryan P.; Catts, Hugh W.; Storkel, Holly L.

    2011-01-01

    Purpose: The purpose of this study was to test the hypothesis that two lexical characteristics--neighborhood density and word frequency--interact to influence performance on phoneme awareness tasks. Methods: Phoneme awareness was examined in a large, longitudinal dataset of 2nd and 4th grade children. Using linear logistic test model, the relation…

  15. Observation in a School without Walls: Peer Observation of Teaching in a 2nd-12th Grade Independent School

    ERIC Educational Resources Information Center

    Salvador, Josephine

    2012-01-01

    What happens when teachers start to observe each other's classes? How do teachers make meaning of observing and being observed? What effects, if any, does requiring peer observation have on the teaching community? This research explores these questions in a qualitative study of peer observation of teaching (POT) in the 2nd-12th grades of an…

  16. Efficient Simulation of Wing Modal Response: Application of 2nd Order Shape Sensitivities and Neural Networks

    NASA Technical Reports Server (NTRS)

    Kapania, Rakesh K.; Liu, Youhua

    2000-01-01

    At the preliminary design stage of a wing structure, an efficient simulation, one needing little computation but yielding adequately accurate results for various response quantities, is essential in the search of optimal design in a vast design space. In the present paper, methods of using sensitivities up to 2nd order, and direct application of neural networks are explored. The example problem is how to decide the natural frequencies of a wing given the shape variables of the structure. It is shown that when sensitivities cannot be obtained analytically, the finite difference approach is usually more reliable than a semi-analytical approach provided an appropriate step size is used. The use of second order sensitivities is proved of being able to yield much better results than the case where only the first order sensitivities are used. When neural networks are trained to relate the wing natural frequencies to the shape variables, a negligible computation effort is needed to accurately determine the natural frequencies of a new design.

  17. First case of Fusobacterium necrophorum endocarditis to have presented after the 2nd decade of life.

    PubMed

    Moore, Curtiss; Addison, Daniel; Wilson, James M; Zeluff, Barry

    2013-01-01

    Fusobacterium necrophorum, an obligate, anaerobic, filamentous, gram-negative rod, is thought to be a normal inhabitant of the mucous membranes in human beings. Fusobacterium species have been implicated in cases of Lemierre syndrome and other pathologic conditions. Their reported association with infective endocarditis is extremely rare. We describe the case of a previously healthy 34-year-old man who emergently presented with flu-like symptoms and dyspnea on exertion. He had recently undergone a dental procedure. Empiric antibiotic therapy was initiated. Blood cultures were positive for metronidazole-resistant F. necrophorum. A transesophageal echocardiogram revealed 2 mobile vegetations on the mitral valve. Despite the antibiotic therapy, the patient's respiratory status worsened and, after 3 weeks, he died. On the basis of the organism's pathophysiology and the patient's recent dental procedure, the oral cavity was the likely source of the bacteremia. Our patient's case underscores the importance of recognizing Fusobacterium bacteremia as a possible cause of endocarditis. To our knowledge, this is the first reported case of monomicrobial F. necrophorum endocarditis to have presented in a patient after the 2nd decade of life. In addition, it is apparently only the 4th report of F. necrophorum mitral valve endocarditis with case results derived from modern culture techniques.

  18. First case of Fusobacterium necrophorum endocarditis to have presented after the 2nd decade of life.

    PubMed

    Moore, Curtiss; Addison, Daniel; Wilson, James M; Zeluff, Barry

    2013-01-01

    Fusobacterium necrophorum, an obligate, anaerobic, filamentous, gram-negative rod, is thought to be a normal inhabitant of the mucous membranes in human beings. Fusobacterium species have been implicated in cases of Lemierre syndrome and other pathologic conditions. Their reported association with infective endocarditis is extremely rare. We describe the case of a previously healthy 34-year-old man who emergently presented with flu-like symptoms and dyspnea on exertion. He had recently undergone a dental procedure. Empiric antibiotic therapy was initiated. Blood cultures were positive for metronidazole-resistant F. necrophorum. A transesophageal echocardiogram revealed 2 mobile vegetations on the mitral valve. Despite the antibiotic therapy, the patient's respiratory status worsened and, after 3 weeks, he died. On the basis of the organism's pathophysiology and the patient's recent dental procedure, the oral cavity was the likely source of the bacteremia. Our patient's case underscores the importance of recognizing Fusobacterium bacteremia as a possible cause of endocarditis. To our knowledge, this is the first reported case of monomicrobial F. necrophorum endocarditis to have presented in a patient after the 2nd decade of life. In addition, it is apparently only the 4th report of F. necrophorum mitral valve endocarditis with case results derived from modern culture techniques. PMID:24082377

  19. Severe weather phenomena: SQUALL LINES The case of July 2nd 2009

    NASA Astrophysics Data System (ADS)

    Paraschivescu, Mihnea; Tanase, Adrian

    2010-05-01

    The wind intensity plays an important role, among the dangerous meteorological phenomena, to produce negative effects on the economy and the social activities, particularly when the wind is about to turn into a storm. During the past years one can notice an increase of wind frequency and intensity due to climate changes and, consequently, as a result of the extreme meteorological phenomena not only on a planetary level but also on a regional one. Although dangerous meteorological phenomena cannot be avoided, since they are natural, nevertheless they can be anticipated and decision making institutions and mass media can be informed. This is the reason why, in this paper, we set out to identify the synoptic conditions that led to the occurrence of the severe storm case in Bucharest on July 2nd, 2009, as well as the matrices that generate such cases. At the same time we sought to identify some indications evidence especially from radar data so as to lead to the improvement of the time interval between the nowcasting warning and the actual occurrence of the phenomenon.

  20. Minimal Clinically Important Difference on Parkinson's Disease Sleep Scale 2nd Version.

    PubMed

    Horváth, Krisztina; Aschermann, Zsuzsanna; Ács, Péter; Deli, Gabriella; Janszky, József; Komoly, Sámuel; Karádi, Kázmér; Kovács, Márton; Makkos, Attila; Faludi, Béla; Kovács, Norbert

    2015-01-01

    Background and Aims. The aim of the present study was to determine the estimates of minimal clinically important difference for Parkinson's Disease Sleep Scale 2nd version (PDSS-2) total score and dimensions. Methods. The subject population consisted of 413 PD patients. At baseline, MDS-UPDRS, Hoehn-Yahr Scale, Mattis Dementia Rating Scale, and PDSS-2 were assessed. Nine months later the PDSS-2 was reevaluated with the Patient-Reported Global Impression Improvement Scale. Both anchor-based techniques (within patients' score change method and sensitivity- and specificity-based method by receiver operating characteristic analysis) and distribution-based approaches (effect size calculations) were utilized to determine the magnitude of minimal clinically important difference. Results. According to our results, any improvements larger than -3.44 points or worsening larger than 2.07 points can represent clinically important changes for the patients. These thresholds have the effect size of 0.21 and -0.21, respectively. Conclusions. Minimal clinically important differences are the smallest change of scores that are subjectively meaningful to patients. Studies using the PDSS-2 as outcome measure should utilize the threshold of -3.44 points for detecting improvement or the threshold of 2.07 points for observing worsening.

  1. Wind-US Results for the AIAA 2nd Propulsion Aerodynamics Workshop

    NASA Technical Reports Server (NTRS)

    Dippold, Vance III; Foster, Lancert; Mankbadi, Mina

    2014-01-01

    This presentation contains Wind-US results presented at the 2nd Propulsion Aerodynamics Workshop. The workshop was organized by the American Institute of Aeronautics and Astronautics, Air Breathing Propulsion Systems Integration Technical Committee with the purpose of assessing the accuracy of computational fluid dynamics for air breathing propulsion applications. Attendees included representatives from government, industry, academia, and commercial software companies. Participants were encouraged to explore and discuss all aspects of the simulation process including the effects of mesh type and refinement, solver numerical schemes, and turbulence modeling. The first set of challenge cases involved computing the thrust and discharge coefficients for a 25deg conical nozzle for a range of nozzle pressure ratios between 1.4 and 7.0. Participants were also asked to simulate two cases in which the 25deg conical nozzle was bifurcated by a solid plate, resulting in vortex shedding (NPR=1.6) and shifted plume shock (NPR=4.0). A second set of nozzle cases involved computing the discharge and thrust coefficients for a convergent dual stream nozzle for a range of subsonic nozzle pressure ratios. The workshop committee also compared the plume mixing of these cases across various codes and models. The final test case was a serpentine inlet diffuser with an outlet to inlet area ratio of 1.52 and an offset of 1.34 times the inlet diameter. Boundary layer profiles, wall static pressure, and total pressure at downstream rake locations were examined.

  2. Crater Wall and Floor

    NASA Technical Reports Server (NTRS)

    2003-01-01

    [figure removed for brevity, see original site]

    3D Projection onto MOLA data [figure removed for brevity, see original site]

    The impact crater observed in this THEMIS image taken in Terra Cimmeria suggests sediments have filled the crater due to the flat and smooth nature of the floor compared to rougher surfaces at higher elevations. The abundance of several smaller impact craters on the floor of the larger crater indicate however that the flat surface has been exposed for an extended period of time. The smooth surface of the crater floor and rougher surfaces at higher elevations are observed in the 3-D THEMIS image that is draped over MOLA topography (2X vertical exaggeration).

    Note: this THEMIS visual image has not been radiometrically nor geometrically calibrated for this preliminary release. An empirical correction has been performed to remove instrumental effects. A linear shift has been applied in the cross-track and down-track direction to approximate spacecraft and planetary motion. Fully calibrated and geometrically projected images will be released through the Planetary Data System in accordance with Project policies at a later time.

    NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The Thermal Emission Imaging System (THEMIS) was developed by Arizona State University, Tempe, in collaboration with Raytheon Santa Barbara Remote Sensing. The THEMIS investigation is led by Dr. Philip Christensen at Arizona State University. Lockheed Martin Astronautics, Denver, is the prime contractor for the Odyssey project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena.

    Image information: VIS instrument. Latitude -22.9, Longitude 155.7 East (204.3 West). 19 meter/pixel resolution.

  3. Reull Vallis Floor

    NASA Technical Reports Server (NTRS)

    2004-01-01

    This Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image shows the odd patterns of erosion on the floor of Reull Vallis, a major valley system east of the Hellas Basin in the martian southern hemisphere. Somewhat circular features in this image may have once been meteor craters that were eroded and deformed by erosive processes. This image is located near 42.1oS, 254.5oW. The picture covers an area about 3 km (1.9 mi) wide. Sunlight illuminates the scene from the upper left.

  4. Mesas on Depression Floor

    NASA Technical Reports Server (NTRS)

    2004-01-01

    3 August 2004 This Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image shows mesas and buttes on the floor of a depression in the Labyrinthus Noctis region of Mars. This is part of the western Valles Marineris. Each mesa is a remnant of a formerly more extensive sequence of rock. The image is located near 7.0oS, 99.2oW. It covers an area about 3 km (1.9 mi) across; sunlight illuminates the scene from the lower left.

  5. Rippled Valley Floor

    NASA Technical Reports Server (NTRS)

    2005-01-01

    15 September 2005 This Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image shows a ripple-covered valley floor in the Hyblaeus Fossae region. Winds blowing up and down the length of the valley have helped to concentrate windblown grains to form these large, megaripples.

    Location near: 26.3oN, 225.1oW Image width: width: 3 km (1.9 mi) Illumination from: lower left Season: Northern Autumn

  6. Crater Floor Yardangs

    NASA Technical Reports Server (NTRS)

    2004-01-01

    1 December 2004 This Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image shows a group of semi-parallel ridges--yardangs--etched by wind into layered sedimentary rock on the floor of an unnamed crater in Terra Cimmeria. Many craters on Mars have been the sites of sedimentation. Over time, these sediments have become lithified. This picture is located near 31.3oS, 214.6oW. The image covers an area approximately 3 km (1.9 mi) across. Sunlight illuminates the scene from the left/upper left.

  7. Concentric Crater Floor

    NASA Technical Reports Server (NTRS)

    2004-01-01

    8 July 2004 This Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image shows the interior of a typical crater in northern Acidalia Planitia. The floor is covered by material that forms an almost concentric pattern. In this case, the semi-concentric rings might be an expression of eroded layered material, although this interpretation is uncertain. The crater is located near 44.0oN, 27.7oW, and covers an area about 3 km (1.9 mi) wide. Sunlight illuminates the scene from the lower left.

  8. [Pelvic floor muscle training and pelvic floor disorders in women].

    PubMed

    Thubert, T; Bakker, E; Fritel, X

    2015-05-01

    Our goal is to provide an update on the results of pelvic floor rehabilitation in the treatment of urinary incontinence and genital prolapse symptoms. Pelvic floor muscle training allows a reduction of urinary incontinence symptoms. Pelvic floor muscle contractions supervised by a healthcare professional allow cure in half cases of stress urinary incontinence. Viewing this contraction through biofeedback improves outcomes, but this effect could also be due by a more intensive and prolonged program with the physiotherapist. The place of electrostimulation remains unclear. The results obtained with vaginal cones are similar to pelvic floor muscle training with or without biofeedback or electrostimulation. It is not known whether pelvic floor muscle training has an effect after one year. In case of stress urinary incontinence, supervised pelvic floor muscle training avoids surgery in half of the cases at 1-year follow-up. Pelvic floor muscle training is the first-line treatment of post-partum urinary incontinence. Its preventive effect is uncertain. Pelvic floor muscle training may reduce the symptoms associated with genital prolapse. In conclusion, pelvic floor rehabilitation supervised by a physiotherapist is an effective short-term treatment to reduce the symptoms of urinary incontinence or pelvic organ prolapse.

  9. 9. LOOKING FROM FLOOR 1 UP THROUGH OPENING TO FLOOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    9. LOOKING FROM FLOOR 1 UP THROUGH OPENING TO FLOOR 2; OPENING IN THE FLOOR IS TO ALLOW THE RUNNER STONES TO BE FLIPPED OVER FOR SHARPENING; AT THE FIRST FLOOR ARE THE POSTS SUPPORTING THE BRIDGEBEAMS ON WHICH THE BRIDGE TREES PIVOT; THE CENTER POST RISES ABOVE THE STONES TO RECEIVE THE FOOT BEARING OF THE UPRIGHT SHAFT; ALSO SEEN ARE THE STONE SPINDLWS, UNDER SIDES OF THE BED STONES, STONE NUT AND GREAT SPUR WHEEL. - Pantigo Windmill, James Lane, East Hampton, Suffolk County, NY

  10. Idaho National Laboratory Quarterly Performance Analysis - 1st Quarter FY2015

    SciTech Connect

    Mitchell, Lisbeth A.

    2015-03-01

    This report is published quarterly by the Idaho National Laboratory (INL) Quality and Performance Management Organization. The Department of Energy (DOE) Occurrence Reporting and Processing System (ORPS), as prescribed in DOE Order 232.2, “Occurrence Reporting and Processing of Operations Information,” requires a quarterly analysis of events, both reportable and not reportable, for the previous 12 months. This report is the analysis of 73 reportable events (27 from the 1St Qtr FY-15 and 46 from the prior three reporting quarters), as well as 38 other issue reports (including nine not reportable events and Significant Category A and B conditions reported during the1st Qtr FY-15) identified at INL during the past 12 months.

  11. Effect of 1st-trimester loss on restoration of the hypothalamic-pituitary-ovarian axis.

    PubMed

    Elkas, J C; Cunningham, D S

    1995-01-01

    This randomized prospective study was conducted to determine the length of time required for re-establishment of the reproductive axis following a 1st-trimester spontaneous abortion. The spontaneous gonadotropin secretion was significantly depressed during the first menstrual cycle after pregnancy loss, while the estradiol levels had normalized. Provocative testing revealed blunted gonadotropin release in the first menstrual cycle with return to normal during the first menstrual cycle after a spontaneous abortion. Endometrial biopsy specimens were also abnormal during the first menstrual cycle with normal histological characteristics by the second menstrual cycle. Therefore, restoration of the hypothalamic-pituitary- ovarian axis after a 1st-trimester loss is achieved within two menstrual cycles, as determined by return of normal pituitary function.

  12. 44. MISSISSIPPI, LOWNDES CO. COLUMBUS RAILROAD BRIDGE End of 1st ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    44. MISSISSIPPI, LOWNDES CO. COLUMBUS RAILROAD BRIDGE End of 1st St. S., Columbus, Ms. Detail from Camille Drie's map: A Bird's Eye View of Columbus, Mississippi ca. 1875-76. Shows M&O RR bridge before the Phoenix Bridge Co. erected iron truss spans in 1878. Credit: Photostat of map in Lowndes Co. Public Library Sarcone Photography, Columbus, Ms. 1978. - Bridges of the Upper Tombigbee River Valley, Columbus, Lowndes County, MS

  13. 43. MISSISSIPPI, LOWNDES CO. COLUMBUS RAILROAD BRIDGE End of 1st ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    43. MISSISSIPPI, LOWNDES CO. COLUMBUS RAILROAD BRIDGE End of 1st St. S., Columbus, Ms. Copy of photo 1900. Shows 1878 M&O RR bridge. The steamboat, 'Gopher,' in foreground, was an archeological survey vessel from the Franklin Institute in Philadelphia. Published in Art in Mississippi (1901). Credit: Copied from print in Lowndes Co. Public Library by Sarcone Photography, Columbus, Ms. 1978. - Bridges of the Upper Tombigbee River Valley, Columbus, Lowndes County, MS

  14. Ruthenium indenylidene "1(st) generation" olefin metathesis catalysts containing triisopropyl phosphite.

    PubMed

    Guidone, Stefano; Nahra, Fady; Slawin, Alexandra M Z; Cazin, Catherine S J

    2015-01-01

    The reaction of triisopropyl phosphite with phosphine-based indenylidene pre-catalysts affords "1(st) generation" cis-complexes. These have been used in olefin metathesis reactions. The cis-Ru species exhibit noticeable differences with the trans-Ru parent complexes in terms of structure, thermal stability and reactivity. Experimental data underline the importance of synergistic effects between phosphites and L-type ligands.

  15. Ruthenium indenylidene “1st generation” olefin metathesis catalysts containing triisopropyl phosphite

    PubMed Central

    Guidone, Stefano; Nahra, Fady; Slawin, Alexandra M Z

    2015-01-01

    Summary The reaction of triisopropyl phosphite with phosphine-based indenylidene pre-catalysts affords “1st generation” cis-complexes. These have been used in olefin metathesis reactions. The cis-Ru species exhibit noticeable differences with the trans-Ru parent complexes in terms of structure, thermal stability and reactivity. Experimental data underline the importance of synergistic effects between phosphites and L-type ligands. PMID:26425210

  16. Ruthenium indenylidene "1(st) generation" olefin metathesis catalysts containing triisopropyl phosphite.

    PubMed

    Guidone, Stefano; Nahra, Fady; Slawin, Alexandra M Z; Cazin, Catherine S J

    2015-01-01

    The reaction of triisopropyl phosphite with phosphine-based indenylidene pre-catalysts affords "1(st) generation" cis-complexes. These have been used in olefin metathesis reactions. The cis-Ru species exhibit noticeable differences with the trans-Ru parent complexes in terms of structure, thermal stability and reactivity. Experimental data underline the importance of synergistic effects between phosphites and L-type ligands. PMID:26425210

  17. Canyon Floor Deposits

    NASA Technical Reports Server (NTRS)

    2005-01-01

    [figure removed for brevity, see original site] Context image for PIA03598 Canyon Floor Deposits

    The layered and wind eroded deposits seen in this VIS image occur on the floor of Chandor Chasma.

    Image information: VIS instrument. Latitude 5.2S, Longitude 283.4E. 17 meter/pixel resolution.

    Note: this THEMIS visual image has not been radiometrically nor geometrically calibrated for this preliminary release. An empirical correction has been performed to remove instrumental effects. A linear shift has been applied in the cross-track and down-track direction to approximate spacecraft and planetary motion. Fully calibrated and geometrically projected images will be released through the Planetary Data System in accordance with Project policies at a later time.

    NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The Thermal Emission Imaging System (THEMIS) was developed by Arizona State University, Tempe, in collaboration with Raytheon Santa Barbara Remote Sensing. The THEMIS investigation is led by Dr. Philip Christensen at Arizona State University. Lockheed Martin Astronautics, Denver, is the prime contractor for the Odyssey project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena.

  18. Floor of Juventae Chasma

    NASA Technical Reports Server (NTRS)

    2002-01-01

    (Released 30 May 2002) Juventae Chasma is an enormous box canyon (250 km X 100 km) which opens to the north and forms the outflow channel Maja Vallis. Most Martian outflow channels such as Maja, Kasei, and Ares Valles begin at point sources such as box canyons and chaotic terrain and then flow unconfined into a basin region. This image captures a portion of the western floor of Juventae Chasma and shows a wide variety of landforms. Conical hills, mesas, buttes and plateaus of layered material dominate this scene and seem to be 'swimming' in vast sand sheets. The conical hills have a spur and gully topography associated with them while the flat topped buttes and mesas do not. This may be indicative of different materials that compose each of these landforms or it could be that the flat-topped layer has been completely eroded off of the conical hills thereby exposing a different rock type. Both the conical hills and flat-topped buttes and mesas have extensive scree slopes (heaps of eroded rock and debris). Ripples, which are inferred to be dunes, can also be seen amongst the hills. No impact craters can be seen in this image, indicating that the erosion and transport of material down the canyon wall and across the floor is occurring at a relatively rapid rate, so that any craters that form are rapidly buried or eroded.

  19. Fretted Terrain Valley Floor

    NASA Technical Reports Server (NTRS)

    2004-01-01

    30 December 2003 This December 2003 Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image shows lineated textures on the floor of a valley in the Deuteronilus region of Mars. Deuteronilus, and neighboring Protonilus and Nilosyrtis, have been known since the Mariner 9 mission as regions of 'fretted terrain.' In this context, 'fretted' does not mean 'worried,' it means 'eroded.' The fretted terrains of Mars are regions along the boundary between cratered highlands and northern lowland plains that have been broken-down into mesas, buttes, and valleys. On the floors of some of these valleys occurs a distinctive lineated and pitted texture--like the example shown here. The cause of the textures is not known, although for decades some scientists have speculated that ice is involved. While this is possible, it is far from a demonstrated fact. This picture is located near 40.1oN, 335.1oW, and covers an area approximately 3 km (1.9 mi) wide; sunlight illuminates the scene from the lower left.

  20. Candor Chasma Floor

    NASA Technical Reports Server (NTRS)

    2005-01-01

    [figure removed for brevity, see original site] Context image for PIA03080 Candor Chasma Floor

    This VIS image shows part of the layered and wind sculpted deposit that occurs on the floor of Candor Chasma.

    Image information: VIS instrument. Latitude 6.6S, Longitude 284.4E. 17 meter/pixel resolution.

    Note: this THEMIS visual image has not been radiometrically nor geometrically calibrated for this preliminary release. An empirical correction has been performed to remove instrumental effects. A linear shift has been applied in the cross-track and down-track direction to approximate spacecraft and planetary motion. Fully calibrated and geometrically projected images will be released through the Planetary Data System in accordance with Project policies at a later time.

    NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The Thermal Emission Imaging System (THEMIS) was developed by Arizona State University, Tempe, in collaboration with Raytheon Santa Barbara Remote Sensing. The THEMIS investigation is led by Dr. Philip Christensen at Arizona State University. Lockheed Martin Astronautics, Denver, is the prime contractor for the Odyssey project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena.

  1. Spallanzani Cr. Floor

    NASA Technical Reports Server (NTRS)

    2005-01-01

    [figure removed for brevity, see original site] Context image for PIA03632 Spallanzani Cr. Floor

    This image was taken by one of the Mars Student Imaging Project (MSIP) teams. Their target is the unusual floor deposits in Spallanzani Crater. The wind may have affected the surface of the layered deposit. Small dunes have formed near the southern margin.

    Image information: VIS instrument. Latitude 57.9S, Longitude 86.5E. 17 meter/pixel resolution.

    Note: this THEMIS visual image has not been radiometrically nor geometrically calibrated for this preliminary release. An empirical correction has been performed to remove instrumental effects. A linear shift has been applied in the cross-track and down-track direction to approximate spacecraft and planetary motion. Fully calibrated and geometrically projected images will be released through the Planetary Data System in accordance with Project policies at a later time.

    NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The Thermal Emission Imaging System (THEMIS) was developed by Arizona State University, Tempe, in collaboration with Raytheon Santa Barbara Remote Sensing. The THEMIS investigation is led by Dr. Philip Christensen at Arizona State University. Lockheed Martin Astronautics, Denver, is the prime contractor for the Odyssey project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena.

  2. Madeira Extreme Floods: 2009/2010 Winter. Case study - 2nd and 20th of February

    NASA Astrophysics Data System (ADS)

    Pires, V.; Marques, J.; Silva, A.

    2010-09-01

    Floods are at world scale the natural disaster that affects a larger fraction of the population. It is a phenomenon that extends it's effects to the surrounding areas of the hydrographic network (basins, rivers, dams) and the coast line. Accordingly to USA FEMA (Federal Emergency Management Agency) flood can be defined as:"A general and temporary condition of partial or complete inundation of two or more acres of normally dry land area or of two or more properties from: Overflow of inland or tidal waters; Unusual and rapid accumulation or runoff of surface waters from any source; Mudflow; Collapse or subsidence of land along the shore of a lake or similar body of water as a result of erosion or undermining caused by waves or currents of water exceeding anticipated cyclical levels that result in a flood as defined above." A flash flood is the result of intense and long duration of continuous precipitation and can result in dead casualties (i.e. floods in mainland Portugal in 1967, 1983 and 1997). The speed and strength of the floods either localized or over large areas, results in enormous social impacts either by the loss of human lives and or the devastating damage to the landscape and human infrastructures. The winter of 2009/2010 in Madeira Island was characterized by several episodes of very intense precipitation (specially in December 2009 and February 2010) adding to a new record of accumulated precipitation since there are records in the island. In February two days are especially rainy with absolute records for the month of February (daily records since 1949): 111mm and 97mm on the 2nd and 20th respectively. The accumulated precipitation ended up with the terrible floods on the 20th of February causing the lost of dozens of human lives and hundreds of millions of Euros of losses The large precipitation occurrences either more intense precipitation in a short period or less intense precipitation during a larger period are sometimes the precursor of

  3. Pelvic floor muscle training exercises

    MedlinePlus

    Kegel exercises ... Pelvic floor muscle training exercises are recommended for: Women with urinary stress incontinence Men with urinary stress incontinence after prostate surgery People who have fecal ...

  4. PREFACE: 2nd International Conference on Competitive Materials and Technological Processes (IC-CMTP2)

    NASA Astrophysics Data System (ADS)

    László, Gömze A.

    2013-12-01

    Competitiveness is one of the most important factors in our life and it plays a key role in the efficiency both of organizations and societies. The more scientifically supported and prepared organizations develop more competitive materials with better physical, chemical and biological properties and the leading companies apply more competitive equipment and technology processes. The aims of the 2nd International Conference on Competitive Materials and Technology Processes (ic-cmtp2) are the following: Promote new methods and results of scientific research in the fields of material, biological, environmental and technology sciences; Change information between the theoretical and applied sciences as well as technical and technological implantations. Promote the communication between the scientist of different nations, countries and continents. Among the major fields of interest are materials with extreme physical, chemical, biological, medical, thermal, mechanical properties and dynamic strength; including their crystalline and nano-structures, phase transformations as well as methods of their technological processes, tests and measurements. Multidisciplinary applications of materials science and technological problems encountered in sectors like ceramics, glasses, thin films, aerospace, automotive and marine industry, electronics, energy, construction materials, medicine, biosciences and environmental sciences are of particular interest. In accordance to the program of the conference ic-cmtp2, more than 250 inquiries and registrations from different organizations were received. Researchers from 36 countries in Asia, Europe, Africa, North and South America arrived at the venue of conference. Including co-authors, the research work of more than 500 scientists are presented in this volume. Professor Dr Gömze A László Chair, ic-cmtp2 The PDF also contains lists of the boards, session chairs and sponsors.

  5. The Ratio of 2nd to 4th Digit Length in Korean Alcohol-dependent Patients

    PubMed Central

    Han, Changwoo; Bae, Hwallip; Lee, Yu-Sang; Won, Sung-Doo; Kim, Dai Jin

    2016-01-01

    Objective The ratio of 2nd to 4th digit length (2D:4D) is a sexually dimorphic trait. Men have a relatively shorter second digit than fourth digit. This ratio is thought to be influenced by higher prenatal testosterone level or greater sensitivity to androgen. The purpose of this study is to investigate the relationship between alcohol dependence and 2D:4D in a Korean sample and whether 2D:4D can be a biologic marker in alcohol dependence. Methods In this study, we recruited 87 male patients with alcohol dependence from the alcohol center of one psychiatric hospital and 52 healthy male volunteers who were all employees in the same hospital as controls. We captured images of the right and left hands of patients and controls using a scanner and extracted data with a graphics program. We measured the 2D:4D of each hand and compared the alcohol dependence group with the control group. We analyzed these ratios using an independent-samples t-test. Results The mean 2D:4D of patients was 0.934 (right hand) and 0.942 (left hand), while the mean 2D:4D of controls was 0.956 (right hand) and 0.958 (left hand). Values for both hands were significantly lower for patients than controls (p<0.001, right hand; p=0.004, left hand). Conclusion Patients who are alcohol dependent have a significantly lower 2D:4D than controls, similar to the results of previous studies, which suggest that a higher prenatal testosterone level in the gonadal period is related to alcoholism. Furthermore, 2D:4D is a possible predictive marker of alcohol dependence. PMID:27121425

  6. The Influence of Instructional Climates on Time Spent in Management Tasks and Physical Activity of 2nd-Grade Students during Physical Education

    ERIC Educational Resources Information Center

    Logan, Samuel W.; Robinson, Leah E.; Webster, E. Kipling; Rudisill, Mary E.

    2015-01-01

    The purpose of this study is to determine the effect of two physical education (PE) instructional climates (mastery, performance) on the percentage of time students spent in a) moderate-to-vigorous physical activity (MVPA) and b) management tasks during PE in 2nd-grade students. Forty-eight 2nd graders (mastery, n = 23; performance, n = 25)…

  7. 18. MAIN FLOOR HOLDING TANKS Main floor, looking at ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    18. MAIN FLOOR - HOLDING TANKS Main floor, looking at holding tanks against the west wall, from which sluice gates are seen protruding. Right foreground-wooden holding tanks. Note narrow wooden flumes through which fish were sluiced into holding and brining tanks. - Hovden Cannery, 886 Cannery Row, Monterey, Monterey County, CA

  8. Floor Plans: Section "AA", Section "BB"; Floor Framing Plans: Section ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Floor Plans: Section "A-A", Section "B-B"; Floor Framing Plans: Section "A-A", Section "B-B" - Fort Washington, Fort Washington Light, Northeast side of Potomac River at Fort Washington Park, Fort Washington, Prince George's County, MD

  9. 18. FOURTH FLOOR BLDG. 28, RAISED CONCRETE SLAB FLOOR WITH ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    18. FOURTH FLOOR BLDG. 28, RAISED CONCRETE SLAB FLOOR WITH BLOCKS AND PULLEYS OVERHEAD LOOKING NORTHEAST. - Fafnir Bearing Plant, Bounded on North side by Myrtle Street, on South side by Orange Street, on East side by Booth Street & on West side by Grove Street, New Britain, Hartford County, CT

  10. 13. Bottom floor, tower interior showing concrete floor and cast ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    13. Bottom floor, tower interior showing concrete floor and cast iron bases for oil butts (oil butts removed when lighthouse lamp was converted to electric power.) - Block Island Southeast Light, Spring Street & Mohegan Trail at Mohegan Bluffs, New Shoreham, Washington County, RI

  11. Sea floor magnetic observatory

    NASA Astrophysics Data System (ADS)

    Korepanov, V.; Prystai, A.; Vallianatos, F.; Makris, J.

    2003-04-01

    The electromagnetic precursors of seismic hazards are widely accepted as strong evidence of the approaching earthquake or volcano eruption. The monitoring of these precursors are of main interest in densely populated areas, what creates serious problems to extract them at the strong industrial noise background. An interesting possibility to improve signal-to-noise ratio gives the installation of the observation points in the shelf zones near the possible earthquake places, what is fairly possible in most seismically active areas in Europe, e. g. in Greece and Italy. The serious restriction for this is the cost of the underwater instrumentation. To realize such experiments it requires the unification of efforts of several countries (e. g., GEOSTAR) or of the funds of some great companies (e. g., SIO magnetotelluric instrument). The progress in electronic components development as well as the appearance of inexpensive watertight glass spheres made it possible to decrease drastically the price of recently developed sea floor magnetic stations. The autonomous vector magnetometer LEMI-301 for sea bed application is described in the report. It is produced on the base of three-component flux-gate sensor. Non-magnetic housing and minimal magnetism of electronic components enable the instrument to be implemented as a monoblock construction where the electronic unit is placed close to the sensor. Automatic circuit provides convenient compensation of the initial field offset and readings of full value (6 digits) of the measured field. Timing by internal clock provides high accuracy synchronization of data. The internal flash memory assures long-term autonomous data storage. The system also has two-axes tilt measurement system. The methodological questions of magnetometer operation at sea bed were studied in order to avoid two types of errors appearing at such experimental cases. First is sea waving influence and second one magnetometer orientation at its random positioning on

  12. PREFACE: 1st Nano-IBCT Conference 2011 - Radiation Damage of Biomolecular Systems: Nanoscale Insights into Ion Beam Cancer Therapy

    NASA Astrophysics Data System (ADS)

    Huber, Bernd A.; Malot, Christiane; Domaracka, Alicja; Solov'yov, Andrey V.

    2012-07-01

    The 1st Nano-IBCT Conference entitled 'Radiation Damage in Biomolecular Systems: Nanoscale Insights into Ion Beam Cancer Therapy' was held in Caen, France, in October 2011. The Meeting was organised in the framework of the COST Action MP1002 (Nano-IBCT) which was launched in December 2010 (http://fias.uni-frankfurt.de/nano-ibct). This action aims to promote the understanding of mechanisms and processes underlying the radiation damage of biomolecular systems at the molecular and nanoscopic level and to use the findings to improve the strategy of Ion Beam Cancer Therapy. In the hope of achieving this, participants from different disciplines were invited to represent the fields of physics, biology, medicine and chemistry, and also included those from industry and the operators of hadron therapy centres. Ion beam therapy offers the possibility of excellent dose localization for treatment of malignant tumours, minimizing radiation damage in normal healthy tissue, while maximizing cell killing within the tumour. Several ion beam cancer therapy clinical centres are now operating in Europe and elsewhere. However, the full potential of such therapy can only be exploited by better understanding the physical, chemical and biological mechanisms that lead to cell death under ion irradiation. Considering a range of spatio-temporal scales, the proposed action therefore aims to combine the unique experimental and theoretical expertise available within Europe to acquire greater insight at the nanoscopic and molecular level into radiation damage induced by ion impact. Success in this endeavour will be both an important scientific breakthrough and give great impetus to the practical improvement of this innovative therapeutic technique. Ion therapy potentially provides an important advance in cancer therapy and the COST action MP1002 will be very significant in ensuring Europe's leadership in this field, providing the scientific background, required data and mechanistic insight which

  13. Stripped Crater Floor

    NASA Technical Reports Server (NTRS)

    2004-01-01

    10 February 2004 This full-resolution Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image shows details on the floor of an ancient meteor crater in the northeastern part of Noachis Terra. After the crater formed, layers of material--perhaps sediment--were deposited in the crater. These materials became somewhat solidified, but later were eroded to form the patterns shown here. Many windblown ripples in the scene indicate the presence of coarse-grained sediment that was not completely stripped away by wind. The picture is located near 22.1oS, 307.0oW. Sunlight illuminates this scene from the left/upper left; the image covers an area 3 km (1.9 mi) wide.

  14. Floor-plan radar

    NASA Astrophysics Data System (ADS)

    Falconer, David G.; Ueberschaer, Ronald M.

    2000-07-01

    Urban-warfare specialists, law-enforcement officers, counter-drug agents, and counter-terrorism experts encounter operational situations where they must assault a target building and capture or rescue its occupants. To minimize potential casualties, the assault team needs a picture of the building's interior and a copy of its floor plan. With this need in mind, we constructed a scale model of a single- story house and imaged its interior using synthetic-aperture techniques. The interior and exterior walls nearest the radar set were imaged with good fidelity, but the distal ones appear poorly defined and surrounded by ghosts and artifacts. The latter defects are traceable to beam attenuation, wavefront distortion, multiple scattering, traveling waves, resonance phenomena, and other effects not accounted for in the traditional (noninteracting, isotropic point scatterer) model for radar imaging.

  15. Flow Along Valley Floors

    NASA Technical Reports Server (NTRS)

    2003-01-01

    [figure removed for brevity, see original site]

    Released 9 May 2003

    Lines indicative of flow in a valley floor (east to west) cut across similar lines in a slightly smaller valley (southeast to northwest), indicating both that material flowed along the valley floor (as opposed to across it) and that relative flow ages may be determined from crosscutting relationships.

    Image information: VIS instrument. Latitude 39.6, Longitude 31.1East (328.9). 19 meter/pixel resolution.

    Note: this THEMIS visual image has not been radiometrically nor geometrically calibrated for this preliminary release. An empirical correction has been performed to remove instrumental effects. A linear shift has been applied in the cross-track and down-track direction to approximate spacecraft and planetary motion. Fully calibrated and geometrically projected images will be released through the Planetary Data System in accordance with Project policies at a later time.

    NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The Thermal Emission Imaging System (THEMIS) was developed by Arizona State University, Tempe, in collaboration with Raytheon Santa Barbara Remote Sensing. The THEMIS investigation is led by Dr. Philip Christensen at Arizona State University. Lockheed Martin Astronautics, Denver, is the prime contractor for the Odyssey project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena.

  16. Neurobehavioral Evaluation System (NES): comparative performance of 2nd-, 4th-, and 8th-grade Czech children.

    PubMed

    Otto, D A; Skalik, I; House, D E; Hudnell, H K

    1996-01-01

    The Neurobehavioral Evaluation System was designed for field studies of workers, but many NES tests can be performed satisfactorily by children as young as 7 or 8 years old and a few tests, such as simple reaction time, can be performed by preschool children. However, little comparative data from children of different ages or grade levels are available. Studies of school children in the Czech Republic indicate that 2nd-grade children could perform the following NES tests satisfactorily: Finger Tapping, Visual Digit Span. Continuous Performance, Symbol-Digit Substitution, Pattern Comparison, and simpler conditions of Switching Attention. Comparative scores of boys and girls from the 2nd, 4th, and 8th grades and power analyses to estimate appropriate sample size were presented. Performance varied systematically with grade level and gender. Larger samples were needed with younger children to achieve comparable levels of statistical power. Gender comparisons indicated that boys responded faster, but made more errors than girls. PMID:8866533

  17. What's New in Floor Care.

    ERIC Educational Resources Information Center

    Griffin, William R.

    1999-01-01

    Examines some of the new equipment, chemicals, and procedures in floor care to help educational facility managers develop floor care programs and improve performance. Trends include more mechanization, higher concentrations and environmentally preferable products for cleaning, and the use of written cleaning procedures. (GR)

  18. Physical properties of double perovskite-type barium neodymium osmate Ba{sub 2}NdOsO{sub 6}

    SciTech Connect

    Wakeshima, Makoto; Hinatsu, Yukio; Ohoyama, Kenji

    2013-01-15

    The crystal, magnetic structures and physical properties of the double perovskite-type barium neodymium osmate Ba{sub 2}NdOsO{sub 6} are investigated through powder X-ray and neutron diffraction, electrical conductivity, magnetic susceptibility, and specific heat measurements. The Rietveld analysis reveals that the Nd and Os ions are arranged with regularity over the six-coordinate B sites in a distorted perovskite ABO{sub 3} framework. The monoclinic crystal structure described by space group P2{sub 1}/n (tilt system a{sup -}a{sup -}c{sup +}) becomes more distorted with decreasing temperature from 300 K down to 2.5 K. This compound shows a long-range antiferromagnetic ordering of Os{sup 5+} below 65 K. An antiferromagnetic ordering of Nd{sup 3+} also occurs at lower temperatures ({approx}20 K). The magnetic structure is of Type I and the magnetic moments of Nd{sup 3+} and Os{sup 5+} ions are in the same direction in the ab-plane. - Graphical Abstract: The Magnetic structure of Ba{sub 2}NdOsO{sub 6} is of Type I, and the magnetic moments of the Nd{sup 3+} and Os{sup 5+} ions are in the same direction in the ab-plane. Highlights: Black-Right-Pointing-Pointer Crystal structures of Ba{sub 2}NdOsO{sub 6} are determined to be monoclinic below 300 K. Black-Right-Pointing-Pointer Its electrical resistivity shows a Mott variable-range hopping behavior with localized carriers. Black-Right-Pointing-Pointer An antiferromagnetic ordering of the Os{sup 5+}moment occurs at 65 K. Black-Right-Pointing-Pointer The magnetic structure of Ba{sub 2}NdOsO{sub 6} is determined to be of Type I.

  19. White Paper Summary of 2nd ASTM International Workshop on Hydrides in Zirconium Alloy Cladding

    SciTech Connect

    Sindelar, R.; Louthan, M.; PNNL, B.

    2015-05-29

    This white paper recommends that ASTM International develop standards to address the potential impact of hydrides on the long term performance of irradiated zirconium alloys. The need for such standards was apparent during the 2nd ASTM International Workshop on Hydrides in Zirconium Alloy Cladding and Assembly Components, sponsored by ASTM International Committee C26.13 and held on June 10-12, 2014, in Jackson, Wyoming. The potentially adverse impacts of hydrogen and hydrides on the long term performance of irradiated zirconium-alloy cladding on used fuel were shown to depend on multiple factors such as alloy chemistry and processing, irradiation and post irradiation history, residual and applied stresses and stress states, and the service environment. These factors determine the hydrogen content and hydride morphology in the alloy, which, in turn, influence the response of the alloy to the thermo-mechanical conditions imposed (and anticipated) during storage, transport and disposal of used nuclear fuel. Workshop presentations and discussions showed that although hydrogen/hydride induced degradation of zirconium alloys may be of concern, the potential for occurrence and the extent of anticipated degradation vary throughout the nuclear industry because of the variations in hydrogen content, hydride morphology, alloy chemistry and irradiation conditions. The tools and techniques used to characterize hydrides and hydride morphologies and their impacts on material performance also vary. Such variations make site-to-site comparisons of test results and observations difficult. There is no consensus that a single material or system characteristic (e.g., reactor type, burnup, hydrogen content, end-of life stress, alloy type, drying temperature, etc.) is an effective predictor of material response during long term storage or of performance after long term storage. Multi-variable correlations made for one alloy may not represent the behavior of another alloy exposed to

  20. RETURN TO DIVISION IA FOOTBALL FOLLOWING A 1ST METATARSOPHALANGEAL JOINT DORSAL DISLOCATION

    PubMed Central

    Cook, Chad; Zarzour, Hap; Moorman, Claude T.

    2010-01-01

    Background. Although rare in occurrence, a dorsal dislocation of the 1st metatarsophalangeal (MTP) joint has been successfully treated using surgical and/or non-operative treatment. No descriptions of conservative intervention following a dorsal dislocation of the MTP joint in an athlete participating in a high contact sport are present in the literature. Objectives. The purpose of this case report is to describe the intervention and clinical reasoning during the rehabilitative process of a collegiate football player diagnosed with a 1st MTP joint dorsal dislocation. The plan of care and return to play criteria used for this athlete are presented. Case Description. The case involved a 19-year-old male Division IA football player, who suffered a traumatic dorsal dislocation of the 1st MTP joint during practice. The dislocation was initially treated on-site by closed reduction. Non-operative management included immobilization, therapeutic exercises, non-steroidal anti-inflammatories, manual treatment, modalities, prophylactic athletic taping, gait training, and a sport specific progression program for full return to Division IA football. Outcomes. Discharge from physical therapy occurred after six weeks of treatment. At discharge, no significant deviations existed during running, burst, and agility related drills. At a six-month follow-up, the patient reported full return to all football activities including contact drills without restrictions. Discussion. This case describes an effective six-week rehabilitation intervention for a collegiate football player who sustained a traumatic great toe dorsal dislocation. Further study is suggested to evaluate the intervention strategies and timeframe for return to contact sports. PMID:21589669

  1. The Ocean Floor

    NASA Astrophysics Data System (ADS)

    Fox, Paul J.

    Over a relatively short period of time Bruce Heezen made significant, imaginative and timely contributions to our understanding of the processes that govern the origin and evolution of oceanic crust in space and time. It is certainly fitting that someone of Heezen's stature be honored by a memorial volume and the collection of papers in The Ocean Floor were gathered together for this purpose. Bruce was a gifted scientist with a wide-ranging appetite for all facets of earth science, and in this respect he would have appreciated the pot pourri of marine geological topics covered in the book (e.g., continental margin investigations, sedimentological processes, plate tectonic models). Unfortunately, the book does not have an overall impact that measures up to the man that it commemorates. Too many of the papers read as if the authors, after having agreed to contribute to the volume, reached deep into their files to dredge up a neglected manuscript on one subject or another. As a consequence, many of the papers lack zest and fail to stimulate interest beyond their narrowly focused themes.

  2. Waterproof Raised Floor Makes Utility Lines Accessible

    NASA Technical Reports Server (NTRS)

    Cohen, M. M.

    1984-01-01

    Floor for laboratories, hospitals and factories waterproof yet allows access to subfloor utilities. Elevated access floor system designed for installations with multitude of diverse utility systems routed under and up through floor and requirement of separation of potentially conflicting utility services. Floor covered by continuous sheet of heat resealable vinyl. Floor system cut open when changes are made in utility lines and ducts. After modifications, floor covering resealed to protect subfloor utilities from spills and leaks.

  3. Low floor mass transit vehicle

    DOEpatents

    Emmons, J. Bruce; Blessing, Leonard J.

    2004-02-03

    A mass transit vehicle includes a frame structure that provides an efficient and economical approach to providing a low floor bus. The inventive frame includes a stiff roof panel and a stiff floor panel. A plurality of generally vertical pillars extend between the roof and floor panels. A unique bracket arrangement is disclosed for connecting the pillars to the panels. Side panels are secured to the pillars and carry the shear stresses on the frame. A unique seating assembly that can be advantageously incorporated into the vehicle taking advantage of the load distributing features of the inventive frame is also disclosed.

  4. 21. VIEW OF THE FIRST FLOOR PLAN. THE FIRST FLOOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    21. VIEW OF THE FIRST FLOOR PLAN. THE FIRST FLOOR WAS USED FOR DEPLETED AND ENRICHED URANIUM FABRICATION. THE ORIGINAL DRAWING HAS BEEN ARCHIVED ON MICROFILM. THE DRAWING WAS REPRODUCED AT THE BEST QUALITY POSSIBLE. LETTERS AND NUMBERS IN THE CIRCLES INDICATE FOOTER AND/OR COLUMN LOCATIONS. - Rocky Flats Plant, Uranium Rolling & Forming Operations, Southeast section of plant, southeast quadrant of intersection of Central Avenue & Eighth Street, Golden, Jefferson County, CO

  5. 22. VIEW OF THE SECOND FLOOR PLAN. THE SECOND FLOOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    22. VIEW OF THE SECOND FLOOR PLAN. THE SECOND FLOOR CONTAINS THE AIR PLENUM ND SOME OFFICE SPACE. THE ORIGINAL DRAWING HAS BEEN ARCHIVED ON MICROFILM. THE DRAWING WAS REPRODUCED AT THE BEST QUALITY POSSIBLE. LETTERS AND NUMBERS IN THE CIRCLES INDICATE FOOTER AND/OR COLUMN LOCATIONS. - Rocky Flats Plant, Uranium Rolling & Forming Operations, Southeast section of plant, southeast quadrant of intersection of Central Avenue & Eighth Street, Golden, Jefferson County, CO

  6. 2nd Radio and Antenna Days of the Indian Ocean (RADIO 2014)

    NASA Astrophysics Data System (ADS)

    2014-10-01

    It was an honor and a great pleasure for all those involved in its organization to welcome the participants to the ''Radio and Antenna Days of the Indian Ocean'' (RADIO 2014) international conference that was held from 7th to 10th April 2014 at the Sugar Beach Resort, Wolmar, Flic-en-Flac, Mauritius. RADIO 2014 is the second of a series of conferences organized in the Indian Ocean region. The aim of the conference is to discuss recent developments, theories and practical applications covering the whole scope of radio-frequency engineering, including radio waves, antennas, propagation, and electromagnetic compatibility. The RADIO international conference emerged following discussions with engineers and scientists from the countries of the Indian Ocean as well as from other parts of the world and a need was felt for the organization of such an event in this region. Following numerous requests, the Island of Mauritius, worldwide known for its white sandy beaches and pleasant tropical atmosphere, was again chosen for the organization of the 2nd RADIO international conference. The conference was organized by the Radio Society, Mauritius and the Local Organizing Committee consisted of scientists from SUPELEC, France, the University of Mauritius, and the University of Technology, Mauritius. We would like to take the opportunity to thank all people, institutions and companies that made the event such a success. We are grateful to our gold sponsors CST and FEKO as well as URSI for their generous support which enabled us to partially support one PhD student and two scientists to attend the conference. We would also like to thank IEEE-APS and URSI for providing technical co-sponsorship. More than hundred and thirty abstracts were submitted to the conference. They were peer-reviewed by an international scientific committee and, based on the reviews, either accepted, eventually after revision, or rejected. RADIO 2014 brought together participants from twenty countries spanning

  7. FOREWORD: 2nd International Workshop on New Computational Methods for Inverse Problems (NCMIP 2012)

    NASA Astrophysics Data System (ADS)

    Blanc-Féraud, Laure; Joubert, Pierre-Yves

    2012-09-01

    Conference logo This volume of Journal of Physics: Conference Series is dedicated to the scientific contributions presented during the 2nd International Workshop on New Computational Methods for Inverse Problems, (NCMIP 2012). This workshop took place at Ecole Normale Supérieure de Cachan, in Cachan, France, on 15 May 2012, at the initiative of Institut Farman. The first edition of NCMIP also took place in Cachan, France, within the scope of the ValueTools Conference, in May 2011 (http://www.ncmip.org/2011/). The NCMIP Workshop focused on recent advances in the resolution of inverse problems. Indeed inverse problems appear in numerous scientific areas such as geophysics, biological and medical imaging, material and structure characterization, electrical, mechanical and civil engineering, and finance. The resolution of inverse problems consists of estimating the parameters of the observed system or structure from data collected by an instrumental sensing or imaging device. Its success firstly requires the collection of relevant observation data. It also requires accurate models describing the physical interactions between the instrumental device and the observed system, as well as the intrinsic properties of the solution itself. Finally, it requires the design of robust, accurate and efficient inversion algorithms. Advanced sensor arrays and imaging devices provide high rate and high volume data; in this context, the efficient resolution of the inverse problem requires the joint development of new models and inversion methods, taking computational and implementation aspects into account. During this one-day workshop, researchers had the opportunity to bring to light and share new techniques and results in the field of inverse problems. The topics of the workshop were: algorithms and computational aspects of inversion, Bayesian estimation, kernel methods, learning methods, convex optimization, free discontinuity problems, metamodels, proper orthogonal decomposition

  8. Development of Hydrologic Characterization Technology of Fault Zones -- Phase I, 2nd Report

    SciTech Connect

    Karasaki, Kenzi; Onishi, Tiemi; Black, Bill; Biraud, Sebastien

    2009-03-31

    This is the year-end report of the 2nd year of the NUMO-LBNL collaborative project: Development of Hydrologic Characterization Technology of Fault Zones under NUMO-DOE/LBNL collaboration agreement, the task description of which can be found in the Appendix 3. Literature survey of published information on the relationship between geologic and hydrologic characteristics of faults was conducted. The survey concluded that it may be possible to classify faults by indicators based on various geometric and geologic attributes that may indirectly relate to the hydrologic property of faults. Analysis of existing information on the Wildcat Fault and its surrounding geology was performed. The Wildcat Fault is thought to be a strike-slip fault with a thrust component that runs along the eastern boundary of the Lawrence Berkeley National Laboratory. It is believed to be part of the Hayward Fault system but is considered inactive. Three trenches were excavated at carefully selected locations mainly based on the information from the past investigative work inside the LBNL property. At least one fault was encountered in all three trenches. Detailed trench mapping was conducted by CRIEPI (Central Research Institute for Electric Power Industries) and LBNL scientists. Some intriguing and puzzling discoveries were made that may contradict with the published work in the past. Predictions are made regarding the hydrologic property of the Wildcat Fault based on the analysis of fault structure. Preliminary conceptual models of the Wildcat Fault were proposed. The Wildcat Fault appears to have multiple splays and some low angled faults may be part of the flower structure. In parallel, surface geophysical investigations were conducted using electrical resistivity survey and seismic reflection profiling along three lines on the north and south of the LBNL site. Because of the steep terrain, it was difficult to find optimum locations for survey lines as it is desirable for them to be as

  9. Autopsy as a tool for learning gross anatomy during 1st year MBBS

    PubMed Central

    Goyal, Parmod Kumar; Gupta, Monika; Kaur, Jaswinder

    2016-01-01

    Introduction: Embalmed cadavers are the primary tool for teaching anatomy. However, difficulties are encountered due to changed color/texture of organs, hardening of tissues, and smell of formaldehyde. To overcome these difficulties, dissections on a fresh human body were shown to the 1st year MBBS students, and their perception was noted. Materials and Methods: After taking universal precautionary measures, postmortem dissections were shown to students on voluntary donated bodies in the dissection hall, in addition to the traditional teaching on embalmed cadavers. Feedback was taken from students and faculty regarding the utility of these sessions. Results: Better appreciation of texture, orientation, location, and relations of organs in fresh body, integration of teaching, awareness of the process and laws related to body donations were the outcomes of the study. However, the smell and sight of blood was felt to be nauseating by some students, and some students were worried about the spread of infectious diseases. Conclusions: Visualizing single fresh body dissection during 1st year professional MBBS is recommended either on medicolegal autopsy or on voluntarily-donated bodies. PMID:27563594

  10. Improving the performance of E-beam 2nd writing in mask alignment accuracy and pattern faultless for CPL technology

    NASA Astrophysics Data System (ADS)

    Lee, Booky; Hung, Richard; Lin, Orson; Wu, Yuan-Hsun; Kozuma, Makoto; Shih, Chiang-Lin; Hsu, Michael; Hsu, Stephen D.

    2005-01-01

    The chromeless phase lithography (CPL) is a potential technology for low k1 optical image. For the CPL technology, we can control the local transmission rate to get optimized through pitch imaging performance. The CPL use zebra pattern to manipulate the pattern local transmission as a tri-tone structure in mask manufacturing. It needs the 2nd level writing to create the zebra pattern. The zebra pattern must be small enough not to be printed out and the 2nd writing overlay accuracy must keep within 40nm. The request is a challenge to E-beam 2nd writing function. The focus of this paper is in how to improve the overlay accuracy and get a precise pattern to form accurate pattern transmission. To fulfill this work several items have been done. To check the possibility of contamination in E-Beam chamber by the conductive layer coating we monitor the particle count in the E-Beam chamber before and after the coated blank load-unload. The conductivity of our conductive layer has been checked to eliminate the charging effect by optimizing film thickness. The dimension of alignment mark has also been optimized through experimentation. And finally we checked the PR remain to ensure sufficient process window in our etching process. To verify the performance of our process we check the 3D SEM picture. Also we use AIMs to prove the resolution improvement capability in CPL compared to the traditional methods-Binary mask and Half Tone mask. The achieved overlay accuracy and process can provide promising approach for NGL reticle manufacturing of CPL technology.

  11. 2nd International Salzburg Conference on Neurorecovery (ISCN 2013) Salzburg/ Austria | November 28th - 29th, 2013

    PubMed Central

    Brainin, M; Muresanu, D; Slavoaca, D

    2014-01-01

    The 2nd International Salzburg Conference on Neurorecovery was held on the 28th and 29th of November, 2013, in Salzburg, one of the most beautiful cities in Austria, which is well known for its rich cultural heritage, world-famous music and beautiful surrounding landscapes. The aim of the conference was to discuss the progress in the field of neurorecovery. The conference brought together internationally renowned scientists and clinicians, who described the clinical and therapeutic relevance of translational research and its applications in neurorehabilitation. PMID:25713602

  12. THE 2nd SCHIZOPHRENIA INTERNATIONAL RESEARCH SOCIETY CONFERENCE, 10–14 APRIL 2010, FLORENCE, ITALY: SUMMARIES OF ORAL SESSIONS

    PubMed Central

    Baharnoori, Moogeh; Bartholomeusz, Cali; Boucher, Aurelie A.; Buchy, Lisa; Chaddock, Christopher; Chiliza, Bonga; Föcking, Melanie; Fornito, Alex; Gallego, Juan A.; Hori, Hiroaki; Huf, Gisele; Jabbar, Gul A.; Kang, Shi Hyun; El Kissi, Yousri; Merchán-Naranjo, Jessica; Modinos, Gemma; Abdel-Fadeel, Nashaat A.M.; Neubeck, Anna-Karin; Ng, Hsiao Piau; Novak, Gabriela; Owolabi, Olasunmbo.O.; Prata, Diana P.; Rao, Naren P.; Riecansky, Igor; Smith, Darryl C.; Souza, Renan P.; Thienel, Renate; Trotman, Hanan D.; Uchida, Hiroyuki; Woodberry, Kristen A.; O'Shea, Anne; DeLisi, Lynn E.

    2014-01-01

    The 2nd Schizophrenia International Research Society Conference, was held in Florence, Italy, April 10–15, 2010. Student travel awardees served as rapporteurs of each oral session and focused their summaries on the most significant findings that emerged from each session and the discussions that followed. The following report is a composite of these reviews. It is hoped that it will provide an overview for those who were present, but could not participate in all sessions, and those who did not have the opportunity to attend, but who would be interested in an update on current investigations ongoing in the field of schizophrenia research. PMID:20934307

  13. Channel Floor Yardangs

    NASA Technical Reports Server (NTRS)

    2004-01-01

    [figure removed for brevity, see original site]

    Released 19 July 2004 The atmosphere of Mars is a dynamic system. Water-ice clouds, fog, and hazes can make imaging the surface from space difficult. Dust storms can grow from local disturbances to global sizes, through which imaging is impossible. Seasonal temperature changes are the usual drivers in cloud and dust storm development and growth.

    Eons of atmospheric dust storm activity has left its mark on the surface of Mars. Dust carried aloft by the wind has settled out on every available surface; sand dunes have been created and moved by centuries of wind; and the effect of continual sand-blasting has modified many regions of Mars, creating yardangs and other unusual surface forms.

    The yardangs in this image are forming in channel floor deposits. The channel itself is funneling the wind to cause the erosion.

    Image information: VIS instrument. Latitude 4.5, Longitude 229.7 East (133.3 West). 19 meter/pixel resolution.

    Note: this THEMIS visual image has not been radiometrically nor geometrically calibrated for this preliminary release. An empirical correction has been performed to remove instrumental effects. A linear shift has been applied in the cross-track and down-track direction to approximate spacecraft and planetary motion. Fully calibrated and geometrically projected images will be released through the Planetary Data System in accordance with Project policies at a later time.

    NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The Thermal Emission Imaging System (THEMIS) was developed by Arizona State University, Tempe, in collaboration with Raytheon Santa Barbara Remote Sensing. The THEMIS investigation is led by Dr. Philip Christensen at Arizona State University. Lockheed Martin Astronautics, Denver, is the prime contractor for the Odyssey project, and developed and built the orbiter. Mission operations are

  14. FOREWORD: 2nd International Workshop on New Computational Methods for Inverse Problems (NCMIP 2012)

    NASA Astrophysics Data System (ADS)

    Blanc-Féraud, Laure; Joubert, Pierre-Yves

    2012-09-01

    Conference logo This volume of Journal of Physics: Conference Series is dedicated to the scientific contributions presented during the 2nd International Workshop on New Computational Methods for Inverse Problems, (NCMIP 2012). This workshop took place at Ecole Normale Supérieure de Cachan, in Cachan, France, on 15 May 2012, at the initiative of Institut Farman. The first edition of NCMIP also took place in Cachan, France, within the scope of the ValueTools Conference, in May 2011 (http://www.ncmip.org/2011/). The NCMIP Workshop focused on recent advances in the resolution of inverse problems. Indeed inverse problems appear in numerous scientific areas such as geophysics, biological and medical imaging, material and structure characterization, electrical, mechanical and civil engineering, and finance. The resolution of inverse problems consists of estimating the parameters of the observed system or structure from data collected by an instrumental sensing or imaging device. Its success firstly requires the collection of relevant observation data. It also requires accurate models describing the physical interactions between the instrumental device and the observed system, as well as the intrinsic properties of the solution itself. Finally, it requires the design of robust, accurate and efficient inversion algorithms. Advanced sensor arrays and imaging devices provide high rate and high volume data; in this context, the efficient resolution of the inverse problem requires the joint development of new models and inversion methods, taking computational and implementation aspects into account. During this one-day workshop, researchers had the opportunity to bring to light and share new techniques and results in the field of inverse problems. The topics of the workshop were: algorithms and computational aspects of inversion, Bayesian estimation, kernel methods, learning methods, convex optimization, free discontinuity problems, metamodels, proper orthogonal decomposition

  15. Brain order disorder 2nd group report of f-EEG

    NASA Astrophysics Data System (ADS)

    Lalonde, Francois; Gogtay, Nitin; Giedd, Jay; Vydelingum, Nadarajen; Brown, David; Tran, Binh Q.; Hsu, Charles; Hsu, Ming-Kai; Cha, Jae; Jenkins, Jeffrey; Ma, Lien; Willey, Jefferson; Wu, Jerry; Oh, Kenneth; Landa, Joseph; Lin, C. T.; Jung, T. P.; Makeig, Scott; Morabito, Carlo Francesco; Moon, Qyu; Yamakawa, Takeshi; Lee, Soo-Young; Lee, Jong-Hwan; Szu, Harold H.; Kaur, Balvinder; Byrd, Kenneth; Dang, Karen; Krzywicki, Alan; Familoni, Babajide O.; Larson, Louis; Harkrider, Susan; Krapels, Keith A.; Dai, Liyi

    2014-05-01

    Since the Brain Order Disorder (BOD) group reported on a high density Electroencephalogram (EEG) to capture the neuronal information using EEG to wirelessly interface with a Smartphone [1,2], a larger BOD group has been assembled, including the Obama BRAIN program, CUA Brain Computer Interface Lab and the UCSD Swartz Computational Neuroscience Center. We can implement the pair-electrodes correlation functions in order to operate in a real time daily environment, which is of the computation complexity of O(N3) for N=102~3 known as functional f-EEG. The daily monitoring requires two areas of focus. Area #(1) to quantify the neuronal information flow under arbitrary daily stimuli-response sources. Approach to #1: (i) We have asserted that the sources contained in the EEG signals may be discovered by an unsupervised learning neural network called blind sources separation (BSS) of independent entropy components, based on the irreversible Boltzmann cellular thermodynamics(ΔS < 0), where the entropy is a degree of uniformity. What is the entropy? Loosely speaking, sand on the beach is more uniform at a higher entropy value than the rocks composing a mountain - the internal binding energy tells the paleontologists the existence of information. To a politician, landside voting results has only the winning information but more entropy, while a non-uniform voting distribution record has more information. For the human's effortless brain at constant temperature, we can solve the minimum of Helmholtz free energy (H = E - TS) by computing BSS, and then their pairwise-entropy source correlation function. (i) Although the entropy itself is not the information per se, but the concurrence of the entropy sources is the information flow as a functional-EEG, sketched in this 2nd BOD report. Area #(2) applying EEG bio-feedback will improve collective decision making (TBD). Approach to #2: We introduce a novel performance quality metrics, in terms of the throughput rate of faster (

  16. Brain order disorder 2nd group report of f-EEG

    NASA Astrophysics Data System (ADS)

    Lalonde, Francois; Gogtay, Nitin; Giedd, Jay; Vydelingum, Nadarajen; Brown, David; Tran, Binh Q.; Hsu, Charles; Hsu, Ming-Kai; Cha, Jae; Jenkins, Jeffrey; Ma, Lien; Willey, Jefferson; Wu, Jerry; Oh, Kenneth; Landa, Joseph; Lin, C. T.; Jung, T. P.; Makeig, Scott; Morabito, Carlo Francesco; Moon, Qyu; Yamakawa, Takeshi; Lee, Soo-Young; Lee, Jong-Hwan; Szu, Harold H.; Kaur, Balvinder; Byrd, Kenneth; Dang, Karen; Krzywicki, Alan; Familoni, Babajide O.; Larson, Louis; Harkrider, Susan; Krapels, Keith A.; Dai, Liyi

    2014-05-01

    Since the Brain Order Disorder (BOD) group reported on a high density Electroencephalogram (EEG) to capture the neuronal information using EEG to wirelessly interface with a Smartphone [1,2], a larger BOD group has been assembled, including the Obama BRAIN program, CUA Brain Computer Interface Lab and the UCSD Swartz Computational Neuroscience Center. We can implement the pair-electrodes correlation functions in order to operate in a real time daily environment, which is of the computation complexity of O(N3) for N=102~3 known as functional f-EEG. The daily monitoring requires two areas of focus. Area #(1) to quantify the neuronal information flow under arbitrary daily stimuli-response sources. Approach to #1: (i) We have asserted that the sources contained in the EEG signals may be discovered by an unsupervised learning neural network called blind sources separation (BSS) of independent entropy components, based on the irreversible Boltzmann cellular thermodynamics(ΔS < 0), where the entropy is a degree of uniformity. What is the entropy? Loosely speaking, sand on the beach is more uniform at a higher entropy value than the rocks composing a mountain - the internal binding energy tells the paleontologists the existence of information. To a politician, landside voting results has only the winning information but more entropy, while a non-uniform voting distribution record has more information. For the human's effortless brain at constant temperature, we can solve the minimum of Helmholtz free energy (H = E - TS) by computing BSS, and then their pairwise-entropy source correlation function. (i) Although the entropy itself is not the information per se, but the concurrence of the entropy sources is the information flow as a functional-EEG, sketched in this 2nd BOD report. Area #(2) applying EEG bio-feedback will improve collective decision making (TBD). Approach to #2: We introduce a novel performance quality metrics, in terms of the throughput rate of faster (

  17. Tangential Floor in a Classroom Setting

    ERIC Educational Resources Information Center

    Marti, Leyla

    2012-01-01

    This article examines floor management in two classroom sessions: a task-oriented computer lesson and a literature lesson. Recordings made in the computer lesson show the organization of floor when a task is given to students. Temporary or "incipient" side floors (Jones and Thornborrow, 2004) emerge beside the main floor. In the literature lesson,…

  18. 49 CFR 393.84 - Floors.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 5 2011-10-01 2011-10-01 false Floors. 393.84 Section 393.84 Transportation Other... Miscellaneous Parts and Accessories § 393.84 Floors. The flooring in all motor vehicles shall be substantially... fumes, exhaust gases, or fire. Floors shall not be permeated with oil or other substances likely...

  19. 49 CFR 393.84 - Floors.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 5 2010-10-01 2010-10-01 false Floors. 393.84 Section 393.84 Transportation Other... Miscellaneous Parts and Accessories § 393.84 Floors. The flooring in all motor vehicles shall be substantially... fumes, exhaust gases, or fire. Floors shall not be permeated with oil or other substances likely...

  20. Perceptual narrowing of linguistic sign occurs in the 1st year of life.

    PubMed

    Palmer, Stephanie Baker; Fais, Laurel; Golinkoff, Roberta Michnick; Werker, Janet F

    2012-01-01

    Over their 1st year of life, infants'"universal" perception of the sounds of language narrows to encompass only those contrasts made in their native language (J. F. Werker & R. C. Tees, 1984). This research tested 40 infants in an eyetracking paradigm and showed that this pattern also holds for infants exposed to seen language-American Sign Language (ASL). Four-month-old, English-only, hearing infants discriminated an ASL handshape distinction, while 14-month-old hearing infants did not. Fourteen-month-old ASL-learning infants, however, did discriminate the handshape distinction, suggesting that, as in heard language, exposure to seen language is required for maintenance of visual language discrimination. Perceptual narrowing appears to be a ubiquitous learning mechanism that contributes to language acquisition. PMID:22277043

  1. Meeting report for the 1st skin microbiota workshop, boulder, CO October 15-16 2012

    PubMed Central

    2014-01-01

    This report details the outcome of the 1st Skin Microbiota Workshop, Boulder, CO, held on October 15th-16th 2012. The workshop was arranged to bring Department of Defense personnel together with experts in microbial ecology, human skin physiology and anatomy, and computational techniques for interrogating the microbiome to define research frontiers at the intersection of these important areas. The workshop outlined a series of questions and created several working groups to address those questions, specifically to promote interdisciplinary activity and potential future collaboration. The US Army provided generous grant support and the meeting was organized and hosted by the University of Colorado at Boulder. A primary forward vision of the meeting was the importance of understanding skin microbial communities to improve the health and stealth of US Army warfighters.

  2. 1st ESMO Consensus Conference in lung cancer; Lugano 2010: small-cell lung cancer.

    PubMed

    Stahel, R; Thatcher, N; Früh, M; Le Péchoux, C; Postmus, P E; Sorensen, J B; Felip, E

    2011-09-01

    The 1st ESMO Consensus Conference on lung cancer was held in Lugano, Switzerland on 21st and 22nd May 2010 with the participation of a multidisciplinary panel of leading professionals in pathology and molecular diagnostics and medical, surgical and radiation oncology. Before the conference, the expert panel prepared clinically relevant questions concerning five areas as follows: early and locally advanced non-small-cell lung cancer (NSCLC), first-line metastatic NSCLC, second-/third-line NSCLC, NSCLC pathology and molecular testing, and small-cell lung cancer (SCLC) to be addressed through discussion at the Consensus Conference. All relevant scientific literature for each question was reviewed in advance. During the Consensus Conference, the panel developed recommendations for each specific question. The consensus agreement in SCLC is reported in this article. The recommendations detailed here are based on an expert consensus after careful review of published data. All participants have approved this final update.

  3. 4th generation of the 1st level surface detector trigger in the Pierre Auger Observator

    NASA Astrophysics Data System (ADS)

    Szadkowski, Z.

    The proposal of a new 4th generation of the Front-End with the advanced 1st level triggers for the Infill Array of the Pierre Auger Observatory and for the Auger North is described. Newest FPGA chips offer much higher capacity of logic registers and memories, as well as DSP blocks. The calibration channel, previously supported by an external dual-port RAM, has been fully implemented into FPGA chip, through a large internal memory. In turn DSP blocks allowed on implementation of much more sophisticated spectral trigger algorithms. A single chip simplified board design, newer architecture of FPGA reduced resouces utilization and power consumption. Higher sampling in the new Front- End in comparison with previous 40 MHz designs as well as free resources for new detection algotithms can be a good platform for CR radio detection technique at Auger enhancing a duty cycle for the detection of UHECR’s.

  4. [The 1st International Youth Ecologist Forum in China, 2009: a review].

    PubMed

    Xiong, You-cai; Xiong, Jun-lan; Li, Pu-fang; Li, Zhi-hua; Kong, Hai-yan; Wang, Shao-ming

    2011-04-01

    To promote the communication and cooperation between Chinese and overseas youth ecologists, a conference entitled "The 1st International Young Ecologist Forum" was held at Lanzhou University in June 29-30, 2009. This conference was organized by outstanding overseas ecologists and hosted by Lanzhou University. The presentations covered broad areas of ecology, including plant-soil interactions, structure and function of regional ecosystems, ecological security and ecological planning, global change ecology, and environmental sustainability, demonstrating that the development of China ecology is gradually from traditional basic research transforming into applied research. The presentations also reflected in some extent the development characteristics, evolution direction, and distribution pattern of China ecological research. China ecological research has gradually formed four centers, the Northeast, North, Northwest, and Southeast China, and each of them has its definite regional characteristics. Some suggestions about the organization form and future planning of the forum were put forward.

  5. [Medical support of the 65th Army during the East Prussian offensive operation performed by the 2nd Belorussian Front].

    PubMed

    Shelepov, A M; Leonik, S I; Lemeshkin, R N

    2015-02-01

    Prussian offensive operation performed by the 2nd Belorussian Front. An activity of the medical An activity of the medical service of the 65th Army during the East Prussian offensive operation performed by the 2nd Belorussian Front is a typical example of the medical support of troops during the final stages of World War II. Forms and methods of medical support management, which were developed during the war, haven't lost their importance in modern conditions. These methods include the establishment of specialized surgical and therapeutic field hospital, establishment of medical institutions in the Army, which worked on the evacuation directions and reserve of mobile hospitals and transport, timely extension of the first echelons of the hospital base front to change institutions hospital deployed the army base. A research of experience in organizing medical support of the offensive operations performed during the last year of World War II provides the material for the development of the theory of modern medical support operations and ability to provide on this basis, the continuity of the hospitals, the continuity of qualified and specialized medical care, improve the performance of diagnostic and treatment work.

  6. Surface-emitting quantum cascade laser with 2nd-order metal-semiconductor gratings for single-lobe emission

    NASA Astrophysics Data System (ADS)

    Boyle, C.; Sigler, C.; Kirch, J. D.; Lindberg, D.; Earles, T.; Botez, D.; Mawst, L. J.

    2016-03-01

    Grating-coupled, surface-emitting (GCSE) quantum-cascade lasers (QCLs) are demonstrated with high-power, single-lobe surface emission. A 2nd-order Au-semiconductor distributed-feedback (DFB)/ distributed-Bragg-reflector (DBR) grating is used for feedback and out-coupling. The DFB and DBR grating regions are 2.55 mm- and 1.28 mm-long, respectively, for a total grating length of 5.1 mm. The lasers are designed to operate in a symmetric longitudinal mode by causing resonant coupling of the guided optical mode to the antisymmetric surface-plasmon modes of the 2nd-order metal/semiconductor grating. In turn, the antisymmetric longitudinal modes are strongly absorbed by the metal in the grating, causing the symmetric longitudinal mode to be favored to lase, which produces a single lobe beam over a grating duty-cycle range of 36-41 %. Simulations indicate that the symmetric mode is always favored to lase, independent of the random phase of residual reflections from the device's cleaved ends. Peak pulsed output powers of ~ 0.4 W were measured with single-lobe, single-mode operation near 4.75 μm.

  7. [Medical support of the 65th Army during the East Prussian offensive operation performed by the 2nd Belorussian Front].

    PubMed

    Shelepov, A M; Leonik, S I; Lemeshkin, R N

    2015-02-01

    Prussian offensive operation performed by the 2nd Belorussian Front. An activity of the medical An activity of the medical service of the 65th Army during the East Prussian offensive operation performed by the 2nd Belorussian Front is a typical example of the medical support of troops during the final stages of World War II. Forms and methods of medical support management, which were developed during the war, haven't lost their importance in modern conditions. These methods include the establishment of specialized surgical and therapeutic field hospital, establishment of medical institutions in the Army, which worked on the evacuation directions and reserve of mobile hospitals and transport, timely extension of the first echelons of the hospital base front to change institutions hospital deployed the army base. A research of experience in organizing medical support of the offensive operations performed during the last year of World War II provides the material for the development of the theory of modern medical support operations and ability to provide on this basis, the continuity of the hospitals, the continuity of qualified and specialized medical care, improve the performance of diagnostic and treatment work. PMID:25920177

  8. Efficacy and Safety of rAAV2-ND4 Treatment for Leber’s Hereditary Optic Neuropathy

    PubMed Central

    Wan, Xing; Pei, Han; Zhao, Min-jian; Yang, Shuo; Hu, Wei-kun; He, Heng; Ma, Si-qi; Zhang, Ge; Dong, Xiao-yan; Chen, Chen; Wang, Dao-wen; Li, Bin

    2016-01-01

    Leber’s hereditary optic neuropathy (LHON) is a mitochondrially inherited disease leading to blindness. A mitochondrial DNA point mutation at the 11778 nucleotide site of the NADH dehydrogenase subunit 4 (ND4) gene is the most common cause. The aim of this study was to evaluate the efficacy and safety of a recombinant adeno-associated virus 2 (AAV2) carrying ND4 (rAAV2-ND4) in LHON patients carrying the G11778A mutation. Nine patients were administered rAAV2-ND4 by intravitreal injection to one eye and then followed for 9 months. Ophthalmologic examinations of visual acuity, visual field, and optical coherence tomography were performed. Physical examinations included routine blood and urine. The visual acuity of the injected eyes of six patients improved by at least 0.3 log MAR after 9 months of follow-up. In these six patients, the visual field was enlarged but the retinal nerve fibre layer remained relatively stable. No other outcome measure was significantly changed. None of the nine patients had local or systemic adverse events related to the vector during the 9-month follow-up period. These findings support the feasible use of gene therapy for LHON. PMID:26892229

  9. 17 CFR 1.62 - Contract market requirement for floor broker and floor trader registration.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... for floor broker and floor trader registration. 1.62 Section 1.62 Commodity and Securities Exchanges....62 Contract market requirement for floor broker and floor trader registration. (a)(1) Each contract... granted a temporary license as a floor broker; or (ii) Purchase or sell solely for such person's...

  10. 17 CFR 1.62 - Contract market requirement for floor broker and floor trader registration.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... for floor broker and floor trader registration. 1.62 Section 1.62 Commodity and Securities Exchanges....62 Contract market requirement for floor broker and floor trader registration. (a)(1) Each contract... granted a temporary license as a floor broker; or (ii) Purchase or sell solely for such person's...

  11. Functional anatomy of pelvic floor.

    PubMed

    Rocca Rossetti, Salvatore

    2016-03-31

    Generally, descriptions of the pelvic floor are discordant, since its complex structures and the complexity of pathological disorders of such structures; commonly the descriptions are sectorial, concerning muscles, fascial developments, ligaments and so on. On the contrary to understand completely nature and function of the pelvic floor it is necessary to study it in the most unitary view and in the most global aspect, considering embriology, philogenesy, anthropologic development and its multiple activities others than urological, gynaecological and intestinal ones. Recent acquirements succeeded in clarifying many aspects of pelvic floor activity, whose musculature has been investigated through electromyography, sonography, magnetic resonance, histology, histochemistry, molecular research. Utilizing recent research concerning not only urinary and gynecologic aspects but also those regarding statics and dynamics of pelvis and its floor, it is now possible to study this important body part as a unit; that means to consider it in the whole body economy to which maintaining upright position, walking and behavior or physical conduct do not share less than urinary, genital, and intestinal functions. It is today possible to consider the pelvic floor as a musclefascial unit with synergic and antagonistic activity of muscular bundles, among them more or less interlaced, with multiple functions and not only the function of pelvic cup closure.

  12. 1st principle simulations of ions in water solutions: Bond structure and chemistry in the hydration shells of highly charged ions

    NASA Astrophysics Data System (ADS)

    Weare, John

    2012-02-01

    Methods of direct simulation (Monte Carlo and molecular dynamics) have provided new insights into the structure and dynamics of electrolyte solutions. However, these methods are limited by the difficulty of developing reliable ion-solvent and solvent-solvent potential interactions in the highly perturbed hydration region. To model the interactions in this region methods of simulation that are based on the direct on the fly solution to the electronic Schr"odinger equation (ab-initio molecular dynamics, AIMD) are being developed. However, 1st principle methods have their own problems because the solution to the electronic structure problem is intractable unless rather uncontrolled approximations are made (e.g. density functional theory, DFT) and there is high computational cost to the solution to the Schr"odinger equation. To test the accuracy of AIMD methods we have directly simulated the XAFS spectra for a series of transition metal ions Ca^2+, Cr^3+, Mn^2+, Fe^3+, Co^2+, Ni^2+, Cu^2+, and Zn^2+. Despite DFT's well know deficiencies, the agreement between the calculated XAFS spectra and the data is almost quantitative for these test ions. This agreement supports the extension of the interpretation well beyond that of the usual XAFS analysis to include higher-order multiple scattering signals in the XAFS spectra, which provide a rigorous probe of the first shell distances and disorders. Less well resolved features of the spectra can still be analyzed and are related to 2nd shell structure. The combination of XAFS measurements and the parameter free AIMD method leads to new insights into the hydration structure of these ions. While strictly local DFT +gga provides excellent agreement with data, the addition of exact exchange seems to provide slightly better structural agreement. The computational complexity of these calculations requires the development of simulation tools that scale to high processor number on massively parallel supercomputers. Our present algorithm

  13. PREFACE: 1st European Conference on Gas Micro Flows (GasMems 2012)

    NASA Astrophysics Data System (ADS)

    Frijns, Arjan; Valougeorgis, Dimitris; Colin, Stéphane; Baldas, Lucien

    2012-05-01

    The aim of the 1st European Conference on Gas Micro Flows is to advance research in Europe and worldwide in the field of gas micro flows as well as to improve global fundamental knowledge and to enable technological applications. Gas flows in microsystems are of great importance and touch almost every industrial field (e.g. fluidic microactuators for active control of aerodynamic flows, vacuum generators for extracting biological samples, mass flow and temperature micro-sensors, pressure gauges, micro heat-exchangers for the cooling of electronic components or for chemical applications, and micro gas analyzers or separators). The main characteristic of gas microflows is their rarefaction, which for device design often requires modelling and simulation both by continuous and molecular approaches. In such flows various non-equilibrium transport phenomena appear, while the role played by the interaction between the gas and the solid device surfaces becomes essential. The proposed models of boundary conditions often need an empirical adjustment strongly dependent on the micro manufacturing technique. The 1st European Conference on Gas Micro Flows is organized under the umbrella of the recently established GASMEMS network (www.gasmems.eu/) consisting of 13 participants and six associate members. The main objectives of the network are to structure research and train researchers in the fields of micro gas dynamics, measurement techniques for gaseous flows in micro experimental setups, microstructure design and micro manufacturing with applications in lab and industry. The conference takes place on June 6-8 2012, at the Skiathos Palace Hotel, on the beautiful island of Skiathos, Greece. The conference has received funding from the European Community's Seventh Framework Programme FP7/2007-2013 under grant agreement ITN GASMEMS no. 215504. It owes its success to many people. We would like to acknowledge the support of all members of the Scientific Committee and of all

  14. PREFACE: 1st International Conference on Rheology and Modeling of Materials

    NASA Astrophysics Data System (ADS)

    Gömze, László A.

    2015-04-01

    Understanding the rheological properties of materials and their rheological behaviors during their manufacturing processes and in their applications in many cases can help to increase the efficiency and competitiveness not only of the finished goods and products but the organizations and societies also. The more scientific supported and prepared organizations develop more competitive products with better thermal, mechanical, physical, chemical and biological properties and the leading companies apply more competitive knowledge, materials, equipment and technology processes. The idea to organize in Hungary the 1st International Conference on Rheology and Modeling of Materials we have received from prospective scientists, physicists, chemists, mathematicians and engineers from Asia, Europe, North and South America including India, Korea, Russia, Turkey, Estonia, France, Italy, United Kingdom, Chile, Mexico and USA. The goals of ic-rmm1 the 1st International Conference on Rheology and Modeling of Materials are the following: • Promote new methods and results of scientific research in the fields of modeling and measurements of rheological properties and behavior of materials under processing and applications. • Change information between the theoretical and applied sciences as well as technical and technological implantations. • Promote the communication between the scientists of different disciplines, nations, countries and continents. The international conference ic-rmm1 provides a platform among the leading international scientists, researchers, PhD students and engineers for discussing recent achievements in measurement, modeling and application of rheology in materials technology and materials science of liquids, melts, solids, crystals and amorphous structures. Among the major fields of interest are the influences of material structures, mechanical stresses temperature and deformation speeds on rheological and physical properties, phase transformation of

  15. Build, install and demonstrate a variable stroke pump control and windmill system: 2nd quarterly technical progress report

    SciTech Connect

    Not Available

    1986-12-30

    Most of the time during the second quarter has been spent on the new gear drive. At the end of the 1st quarter the VSM (Variable Stroke Mechanism) was approximately 50% complete. Some work was done the second quarter on the VSM. An all steel mount was nearly completed for the hydraulic cyclinder. The purchased parts to finish the plumbing are on hand, the feedback control chain purchased, and one of the two pulleys was made. A safety device, that could be optional, is being designed and constructed. This addition would prevent damage to the equipment if all of the hydraulic fluid were lost for some reason.

  16. Ploughing the deep sea floor.

    PubMed

    Puig, Pere; Canals, Miquel; Company, Joan B; Martín, Jacobo; Amblas, David; Lastras, Galderic; Palanques, Albert

    2012-09-13

    Bottom trawling is a non-selective commercial fishing technique whereby heavy nets and gear are pulled along the sea floor. The direct impact of this technique on fish populations and benthic communities has received much attention, but trawling can also modify the physical properties of seafloor sediments, water–sediment chemical exchanges and sediment fluxes. Most of the studies addressing the physical disturbances of trawl gear on the seabed have been undertaken in coastal and shelf environments, however, where the capacity of trawling to modify the seafloor morphology coexists with high-energy natural processes driving sediment erosion, transport and deposition. Here we show that on upper continental slopes, the reworking of the deep sea floor by trawling gradually modifies the shape of the submarine landscape over large spatial scales. We found that trawling-induced sediment displacement and removal from fishing grounds causes the morphology of the deep sea floor to become smoother over time, reducing its original complexity as shown by high-resolution seafloor relief maps. Our results suggest that in recent decades, following the industrialization of fishing fleets, bottom trawling has become an important driver of deep seascape evolution. Given the global dimension of this type of fishery, we anticipate that the morphology of the upper continental slope in many parts of the world’s oceans could be altered by intensive bottom trawling, producing comparable effects on the deep sea floor to those generated by agricultural ploughing on land. PMID:22951970

  17. Flooring for Schools: Unsightly Walkways

    ERIC Educational Resources Information Center

    Baxter, Mark

    2011-01-01

    Many mattress manufacturers recommend that consumers rotate their mattresses at least twice a year to help prevent soft spots from developing and increase the product's life span. It's unfortunate that the same kind of treatment can't be applied to flooring for schools, such as carpeting, especially in hallways. Being able to flip or turn a carpet…

  18. Ploughing the deep sea floor.

    PubMed

    Puig, Pere; Canals, Miquel; Company, Joan B; Martín, Jacobo; Amblas, David; Lastras, Galderic; Palanques, Albert

    2012-09-13

    Bottom trawling is a non-selective commercial fishing technique whereby heavy nets and gear are pulled along the sea floor. The direct impact of this technique on fish populations and benthic communities has received much attention, but trawling can also modify the physical properties of seafloor sediments, water–sediment chemical exchanges and sediment fluxes. Most of the studies addressing the physical disturbances of trawl gear on the seabed have been undertaken in coastal and shelf environments, however, where the capacity of trawling to modify the seafloor morphology coexists with high-energy natural processes driving sediment erosion, transport and deposition. Here we show that on upper continental slopes, the reworking of the deep sea floor by trawling gradually modifies the shape of the submarine landscape over large spatial scales. We found that trawling-induced sediment displacement and removal from fishing grounds causes the morphology of the deep sea floor to become smoother over time, reducing its original complexity as shown by high-resolution seafloor relief maps. Our results suggest that in recent decades, following the industrialization of fishing fleets, bottom trawling has become an important driver of deep seascape evolution. Given the global dimension of this type of fishery, we anticipate that the morphology of the upper continental slope in many parts of the world’s oceans could be altered by intensive bottom trawling, producing comparable effects on the deep sea floor to those generated by agricultural ploughing on land.

  19. The 2nd Order Focusing by Energy for TOF Sector Field Mass Analyzer with an Orthogonal Acceleration: Theory, Modeling, Experiment

    NASA Astrophysics Data System (ADS)

    Poteshin, S. S.; Chernyshev, D. M.; Sysoev, Alexey A.; Sysoev, Alexander A.

    Currently axially symmetric type of analyzer with an electrostatic sector fields (AESF) is rarely used to construct time-of-flight mass spectrometers. The main drawback, hindering the wider use of the analyzers of this type, is the lack of chromatic second-order focusing by energy. However, the configuration of AESF in combination with orthogonal accelerator (OA) allows to achieved it through compensation of energy aberrations of the analyzer in the system of orthogonal input of the ion beam. In the presented work the results of theoretical calculation, simulation and experimentally obtained data are compared. Characteristics of the analyzer with OA in a large extent depend on the parameters of the incoming ion beam. Data of modeling the 2nd stage of gas-dynamic interface, which have the greatest influence on the parameters of the ion beam, is provided.

  20. Use of 2nd and 3rd Level Correlation Analysis for Studying Degradation in Polycrystalline Thin-Film Solar Cells

    SciTech Connect

    Albin, D. S.; del Cueto, J. A.; Demtsu, S. H.; Bansal, S.

    2011-03-01

    The correlation of stress-induced changes in the performance of laboratory-made CdTe solar cells with various 2nd and 3rd level metrics is discussed. The overall behavior of aggregated data showing how cell efficiency changes as a function of open-circuit voltage (Voc), short-circuit current density (Jsc), and fill factor (FF) is explained using a two-diode, PSpice model in which degradation is simulated by systematically changing model parameters. FF shows the highest correlation with performance during stress, and is subsequently shown to be most affected by shunt resistance, recombination and in some cases voltage-dependent collection. Large decreases in Jsc as well as increasing rates of Voc degradation are related to voltage-dependent collection effects and catastrophic shunting respectively. Large decreases in Voc in the absence of catastrophic shunting are attributed to increased recombination. The relevance of capacitance-derived data correlated with both Voc and FF is discussed.

  1. 2nd ESMO Consensus Conference in Lung Cancer: locally advanced stage III non-small-cell lung cancer.

    PubMed

    Eberhardt, W E E; De Ruysscher, D; Weder, W; Le Péchoux, C; De Leyn, P; Hoffmann, H; Westeel, V; Stahel, R; Felip, E; Peters, S

    2015-08-01

    To complement the existing treatment guidelines for all tumour types, ESMO organises consensus conferences to focus on specific issues in each type of tumour. The 2nd ESMO Consensus Conference on Lung Cancer was held on 11-12 May 2013 in Lugano. A total of 35 experts met to address several questions on non-small-cell lung cancer (NSCLC) in each of four areas: pathology and molecular biomarkers, first-line/second and further lines of treatment in advanced disease, early-stage disease and locally advanced disease. For each question, recommendations were made including reference to the grade of recommendation and level of evidence. This consensus paper focuses on locally advanced disease.

  2. Identifying 1st instar larvae for three forensically important blowfly species using "fingerprint" cuticular hydrocarbon analysis.

    PubMed

    Moore, Hannah E; Adam, Craig D; Drijfhout, Falko P

    2014-07-01

    Calliphoridae are known to be the most forensically important insects when it comes to establishing the minimum post mortem interval (PMImin) in criminal investigations. The first step in calculating the PMImin is to identify the larvae present to species level. Accurate identification which is conventionally carried out by morphological analysis is crucial because different insects have different life stage timings. Rapid identification in the immature larvae stages would drastically cut time in criminal investigations as it would eliminate the need to rear larvae to adult flies to determine the species. Cuticular hydrocarbon analysis on 1st instar larvae has been applied to three forensically important blowflies; Lucilia sericata, Calliphora vicina and Calliphora vomitoria, using gas chromatography-mass spectrometry (GC-MS) and principal component analysis (PCA). The results show that each species holds a distinct "fingerprint" hydrocarbon profile, allowing for accurate identification to be established in 1-day old larvae, when it can be challenging to apply morphological criteria. Consequently, this GC-MS based technique could accelerate and strengthen the identification process, not only for forensically important species, but also for other entomological samples which are hard to identify using morphological features.

  3. The U.S. Naval Observatory Robotic Astrometric Telescope 1st Catalog (URAT1)

    NASA Astrophysics Data System (ADS)

    Zacharias, Norbert; Finch, Charlie T.; Subasavage, John P.; Tilleman, Trudy; DiVittorio, Mike; Harris, Hugh C.; Rafferty, Ted; Wieder, Gary; Eric Ferguson, Chris Kilian, Albert Rhodes, Mike Schultheis

    2015-01-01

    The 1st USNO Robotic Astrometric Telescope Catalog (URAT1) is about tobe released. It contains accurate positions (typically 10 to 30 mas std.error) of 220 million stars, mainly on the northern hemisphere. Propermotions were obtained for 85% of these stars utilizing the 2MASS as 1stepoch. URAT1 is supplemented by 2MASS and APASS photometry. The URAT1catalog was derived from 2 years of operations (April 2012 to April 2014)of the USNO "redlens" astrograph with its 474 Mpx 4-shooter camera at theNaval Observatory Flagstaff Station (NOFS) in a joint effort betweenUSNO's Astrometry Department and NOFS. Due to a combination of longexposures and short exposures with objective grating, URAT1 observationscover the large 3 to 18.5 magnitude range in a single 680-750 nm bandpass.The catalog properties are presented together with a brief summary ofobservations and reductions methods. URAT1 has on average about 4-timesthe number of stars per square degree and is 4-times more accurate thanUCAC4. URAT1 will serve as the currently most accurate astrometric anddeep photometric optical reference star catalog until the delivery ofthe Gaia catalog.

  4. 1st Advanced Marine Renewable Energy Instrumentation Experts Workshop: April 5-7, 2011

    SciTech Connect

    Not Available

    2011-10-01

    The U.S. marine energy industry is actively pursuing development of offshore wind and marine hydrokinetic (MHK) energy systems. Experience in the wind energy sector demonstrates that new technology development requires thorough measurement and characterization of the environmental conditions prevalent at installation sites and of technology operating in the field. Presently, there are no turn-key instrumentation system solutions that meet the measurement needs of the marine energy industry. The 1st Advanced Marine Renewable Energy Instrumentation Experts Workshop brought together technical experts from government laboratories, academia, and industry representatives from marine energy, wind, offshore oil and gas, and instrumentation developers to present and discuss the instrumentation needs of the marine energy industry. The goals of the meeting were to: (1) Share the latest relevant knowledge among technical experts; (2) Review relevant state-of-the-art field measurement technologies and methods; (3) Review lessons learned from recent field deployments; (4) Identify synergies across different industries; (5) Identify gaps between existing and needed instrumentation capabilities; (6) Understand who are the leading experts; (7) Provide a forum where stakeholders from the marine energy industry could provide substantive input in the development of new marine energy field deployable instrumentation packages.

  5. Wind-US Results for the AIAA 1st Propulsion Aerodynamics Workshop

    NASA Technical Reports Server (NTRS)

    Yoder, Dennis; Dippold, Vance, III; Georgiadis, Nicholas

    2012-01-01

    This presentation contains Wind-US results presented at the 1st Propulsion Aerodynamics Workshop. The The workshop was organized by the American Institute of Aeronautics and Astronautics, Air Breathing Propulsion Propulsion Systems Integration Technical Committee with the purpose of assessing the accuracy of computational computational fluid dynamics for air breathing propulsion applications. Attendees included representatives from representatives from government, industry, academia, and commercial software companies. Participants were were encouraged to explore and discuss all aspects of the simulation process including the effects of mesh type and mesh type and refinement, solver numerical schemes, and turbulence modeling. The first set of challenge cases involved computing the thrust and discharge coefficients for a series of convergent convergent nozzles for a range of nozzle pressure ratios between 1.4 and 7.0. These configurations included a included a reference axisymmetric nozzle as well as 15deg , 25deg , and 40deg conical nozzles. Participants were also asked also asked to examine the plume shock structure for two cases where the 25deg conical nozzle was bifurcated by a bifurcated by a solid plate. The final test case was a serpentine inlet diffuser with an outlet to inlet area ratio of 1.52 ratio of 1.52 and an offset of 1.34 times the inlet diameter. Boundary layer profiles, wall static pressure, and total and total pressure at downstream rake locations were examined.

  6. PROPAGATION AND EVOLUTION OF THE JUNE 1st 2008 CME IN THE INTERPLANETARY MEDIUM

    NASA Astrophysics Data System (ADS)

    Nieves-Chinchilla, T.; Lamb, D. A.; Davila, J. M.; Vinas, A. F.; Moestl, C.; Hidalgo, M. A.; Farrugia, C. J.; Malandraki, O.; Dresing, N.; Gómez-Herrero, R.

    2009-12-01

    In this work we present a study of the coronal mass ejection (CME) of June 1st of 2008 in the interplanetary medium. This event has been extensively studied by others because of its favorable geometry and the possible consequences of its peculiar initiation for space weather forecasting. We show an analysis of the evolution of the CME in the interplanetary medium in order to shed some light on the propagation mechanism of the ICME. We have determined the typical shock associated characteristics of the ICME in order to understand the propagation properties. Using two different non force-free models of the magnetic cloud allows us to incorporate expansion of the cloud. We use in-situ measurements from STEREO B/IMPACT to characterize the ICME. In addition, we use images from STEREO A/SECCHI-HI to analyze the propagation and visual evolution of the associated flux rope in the interplanetary medium. We compare and contrast these observations with the results of the analytical models.

  7. Impact of Insulin Resistance on Neointimal Tissue Proliferation after 2nd-Generation Drug-Eluting Stent Implantation.

    PubMed

    Komatsu, Takaaki; Yaguchi, Isao; Komatsu, Sachiko; Nakahara, Shiro; Kobayashi, Sayuki; Sakai, Yoshihiko; Taguchi, Isao

    2015-08-01

    Percutaneous coronary intervention is established as an effective treatment for patients with ischemic heart disease; in particular, drug-eluting stent implantation is known to suppress in-stent restenosis. Diabetes mellitus is an independent risk factor for restenosis, so reducing insulin resistance is being studied as a new treatment approach. In this prospective study, we sought to clarify the factors associated with in-stent restenosis after percutaneous coronary intervention, and we evaluated the homeostasis model assessment of insulin resistance (HOMA-IR) index as a predictor of restenosis. We enrolled 136 consecutive patients who underwent elective percutaneous coronary intervention at our hospital from February 2010 through April 2013. All were implanted with a 2nd-generation drug-eluting stent. We distributed the patients in accordance with their HOMA-IR index values into insulin-resistant Group P (HOMA-IR, ≥2.5; n=77) and noninsulin-resistant Group N (HOMA-IR, <2.5; n=59). Before and immediately after stenting, we measured reference diameter, minimal lumen diameter, and percentage of stenosis, and after 8 months we measured the last 2 factors and late lumen loss, all by means of quantitative coronary angiography. After 8 months, the mean minimal lumen diameter was smaller in Group P than that in Group N (1.85 ± 1.02 vs 2.37 ± 0.66 mm; P=0.037), and the mean late lumen loss was larger (0.4 ± 0.48 vs 0.16 ± 0.21 mm; P=0.025). These results suggest that insulin resistance affects neointimal tissue proliferation after 2nd-generation drug-eluting stent implantation. PMID:26413014

  8. Laparoscopic hepatectomy is theoretically better than open hepatectomy: preparing for the 2nd International Consensus Conference on Laparoscopic Liver Resection.

    PubMed

    Wakabayashi, Go; Cherqui, Daniel; Geller, David A; Han, Ho-Seong; Kaneko, Hironori; Buell, Joseph F

    2014-10-01

    Six years have passed since the first International Consensus Conference on Laparoscopic Liver Resection was held. This comparatively new surgical technique has evolved since then and is rapidly being adopted worldwide. We compared the theoretical differences between open and laparoscopic liver resection, using right hepatectomy as an example. We also searched the Cochrane Library using the keyword "laparoscopic liver resection." The papers retrieved through the search were reviewed, categorized, and applied to the clinical questions that will be discussed at the 2nd Consensus Conference. The laparoscopic hepatectomy procedure is more difficult to master than the open hepatectomy procedure because of the movement restrictions imposed upon us when we operate from outside the body cavity. However, good visibility of the operative field around the liver, which is located beneath the costal arch, and the magnifying provide for neat transection of the hepatic parenchyma. Another theoretical advantage is that pneumoperitoneum pressure reduces hemorrhage from the hepatic vein. The literature search turned up 67 papers, 23 of which we excluded, leaving only 44. Two randomized controlled trials (RCTs) are underway, but their results are yet to be published. Most of the studies (n = 15) concerned short-term results, with some addressing long-term results (n = 7), cost (n = 6), energy devices (n = 4), and so on. Laparoscopic hepatectomy is theoretically superior to open hepatectomy in terms of good visibility of the operative field due to the magnifying effect and reduced hemorrhage from the hepatic vein due to pneumoperitoneum pressure. However, there is as yet no evidence from previous studies to back this up in terms of short-term and long-term results. The 2nd International Consensus Conference on Laparoscopic Liver Resection will arrive at a consensus on the basis of the best available evidence, with video presentations focusing on surgical techniques and the publication

  9. 78 FR 47698 - Notice to all Interested Parties of the Termination of the Receivership of 10183, 1st American...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-06

    ... From the Federal Register Online via the Government Publishing Office FEDERAL DEPOSIT INSURANCE CORPORATION Notice to all Interested Parties of the Termination of the Receivership of 10183, 1st American State Bank of Minnesota Hancock, MN Notice is hereby given that the Federal Deposit...

  10. Laying a Foundation for Lifelong Learning: Case Studies of E-Assessment in Large 1st-Year Classes

    ERIC Educational Resources Information Center

    Nicol, David

    2007-01-01

    Concerns about noncompletion and the quality of the 1st-year student experience have been linked to recent changes in higher education such as modularisation, increased class sizes, greater diversity in the student intake and reduced resources. Improving formative assessment and feedback processes is seen as one way of addressing academic failure,…

  11. 78 FR 7781 - Filing Dates for the South Carolina Special Elections in the 1st Congressional District

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-04

    ... From the Federal Register Online via the Government Publishing Office FEDERAL ELECTION COMMISSION Filing Dates for the South Carolina Special Elections in the 1st Congressional District AGENCY: Federal Election Commission. ACTION: Notice of filing dates for special elections. SUMMARY: South Carolina...

  12. Bills to Increase Employment Opportunities through the Youth Conservation Corps and Other Means, 95th Congress, 1st Session.

    ERIC Educational Resources Information Center

    Congress of the U.S., Washington, DC.

    This packet contains nine Senate bills and eight House bills from the 95th Congress, 1st session, all dealing with various means of increasing employment opportunities. Most of the bills deal with the creation of new jobs or with programs for job training, counseling, or placement. Seven of the bills constitute amendments to the Youth Conservation…

  13. Jordanian Kindergarten and 1st-Grade Teachers' Beliefs about Child-Based Dimensions of School Readiness

    ERIC Educational Resources Information Center

    Fayez, Merfat; Ahmad, Jamal Fathi; Oliemat, Enass

    2016-01-01

    The purpose of this study was to explore the beliefs of Jordanian kindergarten and 1st-grade teachers regarding six child-based dimensions of school readiness: academic knowledge, basic thinking skills, socioemotional maturity, physical well-being and motor development, self-discipline, and communication skills. Questionnaires were used to collect…

  14. Maternal Sleep-Related Cognitions and Infant Sleep: A Longitudinal Study from Pregnancy through the 1st Year

    ERIC Educational Resources Information Center

    Tikotzky, Liat; Sadeh, Avi

    2009-01-01

    Infant sleep is a major source of concern for many parents. The aims of this longitudinal study were to assess: (a) the development of sleep patterns among infants, (b) the development of maternal cognitions regarding infant sleep, and (c) the relations between these domains during the 1st year of life. Eighty-five mothers were recruited during…

  15. Addressing the Effects of Reciprocal Teaching on the Receptive and Expressive Vocabulary of 1st-Grade Students

    ERIC Educational Resources Information Center

    Mandel, Eliana; Osana, Helena P.; Venkatesh, Vivek

    2013-01-01

    This study evaluated the effects of Adapted Reciprocal Teaching (ART) on the receptive and expressive flight-word vocabulary of 1st-grade students. During ART, classroom interactions produced narrative contexts within which students assumed responsibility for applying new flight words in personally meaningful ways. Students in the control group…

  16. Raise the Floor When Remodeling Science Labs

    ERIC Educational Resources Information Center

    Nation's Schools, 1972

    1972-01-01

    A new remodeling idea adopts the concept of raised floor covering gas, water, electrical, and drain lines. The accessible floor has removable panels set into an adjustable support frame 24 inches above a concrete subfloor. (Author)

  17. Sea-Floor Spreading and Transform Faults

    ERIC Educational Resources Information Center

    Armstrong, Ronald E.; And Others

    1978-01-01

    Presents the Crustal Evolution Education Project (CEEP) instructional module on Sea-Floor Spreading and Transform Faults. The module includes activities and materials required, procedures, summary questions, and extension ideas for teaching Sea-Floor Spreading. (SL)

  18. 49 CFR 38.59 - Floor surfaces.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 1 2012-10-01 2012-10-01 false Floor surfaces. 38.59 Section 38.59 Transportation Office of the Secretary of Transportation AMERICANS WITH DISABILITIES ACT (ADA) ACCESSIBILITY SPECIFICATIONS FOR TRANSPORTATION VEHICLES Rapid Rail Vehicles and Systems § 38.59 Floor surfaces. Floor surfaces on aisles, places for standees, and...

  19. 14 CFR 25.793 - Floor surfaces.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Floor surfaces. 25.793 Section 25.793 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY AIRPLANES Design and Construction Personnel and Cargo Accommodations § 25.793 Floor surfaces. The floor surface of...

  20. 49 CFR 38.59 - Floor surfaces.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 1 2013-10-01 2013-10-01 false Floor surfaces. 38.59 Section 38.59 Transportation Office of the Secretary of Transportation AMERICANS WITH DISABILITIES ACT (ADA) ACCESSIBILITY SPECIFICATIONS FOR TRANSPORTATION VEHICLES Rapid Rail Vehicles and Systems § 38.59 Floor surfaces. Floor surfaces on aisles, places for standees, and...

  1. 49 CFR 38.59 - Floor surfaces.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 1 2014-10-01 2014-10-01 false Floor surfaces. 38.59 Section 38.59 Transportation Office of the Secretary of Transportation AMERICANS WITH DISABILITIES ACT (ADA) ACCESSIBILITY SPECIFICATIONS FOR TRANSPORTATION VEHICLES Rapid Rail Vehicles and Systems § 38.59 Floor surfaces. Floor surfaces on aisles, places for standees, and...

  2. 7 CFR 2902.39 - Floor strippers.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Floor strippers. (a) Definition. Products that are formulated to loosen waxes, resins, or varnishes from floor surfaces. They can be in either liquid or gel form, and may also be used with or without... 7 Agriculture 15 2010-01-01 2010-01-01 false Floor strippers. 2902.39 Section 2902.39...

  3. 7 CFR 993.107 - Floor inspection.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Floor inspection. 993.107 Section 993.107 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... Administrative Rules and Regulations Definitions § 993.107 Floor inspection. Floor inspection means inspection...

  4. 7 CFR 993.505 - Floor inspection.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Floor inspection. 993.505 Section 993.505 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... Pack Specification as to Size Definitions § 993.505 Floor inspection. Floor inspection means...

  5. 49 CFR 38.59 - Floor surfaces.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 1 2011-10-01 2011-10-01 false Floor surfaces. 38.59 Section 38.59 Transportation Office of the Secretary of Transportation AMERICANS WITH DISABILITIES ACT (ADA) ACCESSIBILITY SPECIFICATIONS FOR TRANSPORTATION VEHICLES Rapid Rail Vehicles and Systems § 38.59 Floor surfaces. Floor...

  6. 7 CFR 993.505 - Floor inspection.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 8 2011-01-01 2011-01-01 false Floor inspection. 993.505 Section 993.505 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... Pack Specification as to Size Definitions § 993.505 Floor inspection. Floor inspection means...

  7. 14 CFR 25.793 - Floor surfaces.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Floor surfaces. 25.793 Section 25.793 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS... Floor surfaces. The floor surface of all areas which are likely to become wet in service must have...

  8. 7 CFR 993.107 - Floor inspection.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 8 2011-01-01 2011-01-01 false Floor inspection. 993.107 Section 993.107 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... Administrative Rules and Regulations Definitions § 993.107 Floor inspection. Floor inspection means inspection...

  9. 36 CFR 1192.59 - Floor surfaces.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 36 Parks, Forests, and Public Property 3 2011-07-01 2011-07-01 false Floor surfaces. 1192.59 Section 1192.59 Parks, Forests, and Public Property ARCHITECTURAL AND TRANSPORTATION BARRIERS COMPLIANCE... Rail Vehicles and Systems § 1192.59 Floor surfaces. Floor surfaces on aisles, places for standees,...

  10. 14 CFR 25.793 - Floor surfaces.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Floor surfaces. 25.793 Section 25.793 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS... Floor surfaces. The floor surface of all areas which are likely to become wet in service must have...

  11. 36 CFR 1192.59 - Floor surfaces.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false Floor surfaces. 1192.59 Section 1192.59 Parks, Forests, and Public Property ARCHITECTURAL AND TRANSPORTATION BARRIERS COMPLIANCE... Rail Vehicles and Systems § 1192.59 Floor surfaces. Floor surfaces on aisles, places for standees,...

  12. 49 CFR 38.59 - Floor surfaces.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 1 2010-10-01 2010-10-01 false Floor surfaces. 38.59 Section 38.59 Transportation Office of the Secretary of Transportation AMERICANS WITH DISABILITIES ACT (ADA) ACCESSIBILITY SPECIFICATIONS FOR TRANSPORTATION VEHICLES Rapid Rail Vehicles and Systems § 38.59 Floor surfaces. Floor...

  13. PREFACE: 1st Conference on Light and Particle Beams in Materials Science 2013 (LPBMS2013)

    NASA Astrophysics Data System (ADS)

    Kumai, Reiji; Murakami, Youichi

    2014-04-01

    From 29-31 August 2013, the 1st International Conference on Light and Particle Beams in Materials Science, LPBMS 2013, took place in the Tsukuba International Congress Center in the city of Tsukuba, Japan. The conference was a continuation of the international series Synchrotron Radiation in Materials Science (SRMS), which started in 1994. The last one, SRMS-7, was held in Oxford UK 11-14 July 2010, where the International Advisory Committee (IAC) recommended the conference be enlarged to incorporate Materials Research from Neutron, Muon, and Slow Positron Sources, as well as the science emerging from Synchrotron Light Sources. The conference brought together contributions from academics and industrial researchers with a diverse background and experience from the physics, chemistry and engineering communities. The topics covered in the LPBMS2013 include strongly correlated electron systems, magnetism and magnetic materials, soft matter, interface and surface defects, catalysts, biomaterials, and ceramics. In the 3-day scientific program, the conference consisted of 9 plenary talks, 33 invited talks, 20 oral presentations, and 126 poster presentations. We are pleased to publish the proceedings of the LPBMS2013 in this volume of Journal of Physics: Conference Series. This volume contains 58 papers representing the work that was presented and discussed at the conference. We hope that this volume will promote further development of this interdisciplinary materials research emerging from synchrotron light, neutron, muon, and slow positron sciences. Finally, we would like to thank the International Advisory Committee (Chair: Professor G N Greaves), sponsors, all the participants and contributors for making possible this international meeting of researchers. Reiji Kumai & Youichi Murakami Conference photograph Details of the program and organizing committees are available in the pdf

  14. Foreword to Selected presentations from the 1st European Hip Sport Meeting.

    PubMed

    Dallari, Dante; Ribas, Manuel

    2016-05-14

    Recent years have witnessed a growing number of people practising sports both at professional and amateur level. This trend led to a progressive rise in the incidence and prevalence of acute and chronic hip damage. The treatment of hip disease in subjects practising sports is a major challenge for the orthopaedic surgeon. The evaluation of patients, in particular those of young age with high functional demands, is inevitably complex and should be performed with a multidisciplinary approach; from a surgical point of view, it is essential to carefully assess whether the indication is towards conservative surgery or hip replacement surgery. The advent of arthroscopic surgery in recent years has allowed us to improve our knowledge of hip joint diseases, such as femoroacetabular impingement that is typical of sports and overuse activity. A correct and early diagnosis of the disease can direct the patient promptly to a conservative surgical treatment that could reduce the progression of degenerative pathology. However, when the joint is permanently damaged, the only reliable solution remains prosthetic surgery, leading to a series of issues that the orthopaedic surgeon should be able to master, leading to a thoughtful decision on, for example, which implant to use, which biomaterials, which surgical approach or which sport to practise after surgery. This supplement contains selected contributions stemming from the work performed by internationally recognised experts in the field and presented during the 1st European Hip Sport Meeting held in Bologna on May 19th, 20th, 2016 that we had the honour to co-chair. We hope that these contributions will help the orthopaedic surgeon, the sports physician and physiotherapist in their day-to-day practice, and will help in fulfilling our ultimate aim to improve the knowledge of the hip pathology related to sports and overuse activities. PMID:27174057

  15. Patterns of Irregular Burials in Western Europe (1st-5th Century A.D.)

    PubMed Central

    Milella, Marco; Mariotti, Valentina; Belcastro, Maria Giovanna; Knüsel, Christopher J.

    2015-01-01

    Background Irregular burials (IB—burials showing features that contrast with the majority of others in their geographic and chronological context) have been the focus of archaeological study because of their relative rarity and enigmatic appearance. Interpretations of IB often refer to supposed fear of the dead or to social processes taking place in time-specific contexts. However, a comprehensive and quantitative analysis of IB for various geographical contexts is still lacking, a fact that hampers any discussion of these burials on a larger scale. Methods Here, we collected a bibliographic dataset of 375 IB from both Britain and Continental Europe, altogether spanning a time period from the 1st to the 5th century AD. Each burial has been coded according to ten dichotomous variables, further analyzed by means of chi-squared tests on absolute frequencies, non-metric multidimensional scaling, and cluster analysis. Results Even acknowledging the limits of this study, and in particular the bias represented by the available literature, our results point to interesting patterns. Geographically, IB show a contrast between Britain and Continental Europe, possibly related to historical processes specific to these regions. Different types of IB (especially prone depositions and depositions with the cephalic extremity displaced) present a series of characteristics and associations between features that permit a more detailed conceptualization of these occurrences from a socio-cultural perspective that aids to elucidate their funerary meaning. Conclusions and Significance Altogether, the present work stresses the variability of IB, and the need to contextualize them in a proper archaeological and historical context. It contributes to the discussion of IB by providing a specific geographic and chronological frame of reference that supports a series of hypotheses about the cultural processes possibly underlying their occurrence. PMID:26115408

  16. Computational Simulations of Convergent Nozzles for the AIAA 1st Propulsion Aerodynamics Workshop

    NASA Technical Reports Server (NTRS)

    Dippold, Vance F., III

    2014-01-01

    Computational Fluid Dynamics (CFD) simulations were completed for a series of convergent nozzles in participation of the American Institute of Aeronautics and Astronautics (AIAA) 1st Propulsion Aerodynamics Workshop. The simulations were performed using the Wind-US flow solver. Discharge and thrust coefficients were computed for four axisymmetric nozzles with nozzle pressure ratios (NPR) ranging from 1.4 to 7.0. The computed discharge coefficients showed excellent agreement with available experimental data; the computed thrust coefficients captured trends observed in the experimental data, but over-predicted the thrust coefficient by 0.25 to 1.0 percent. Sonic lines were computed for cases with NPR >= 2.0 and agreed well with experimental data for NPR >= 2.5. Simulations were also performed for a 25 deg. conic nozzle bifurcated by a flat plate at NPR = 4.0. The jet plume shock structure was compared with and without the splitter plate to the experimental data. The Wind-US simulations predicted the shock structure well, though lack of grid resolution in the plume reduced the sharpness of the shock waves. Unsteady Reynolds-Averaged Navier-Stokes (URANS) simulations and Detached Eddy Simulations (DES) were performed at NPR = 1.6 for the 25 deg conic nozzle with splitter plate. The simulations predicted vortex shedding from the trailing edge of the splitter plate. However, the vortices of URANS and DES solutions appeared to dissipate earlier than observed experimentally. It is believed that a lack of grid resolution in the region of the vortex shedding may have caused the vortices to break down too soon

  17. PREFACE: 1st International Conference on Sensing for Industry, Control, Communication & Security Technologies

    NASA Astrophysics Data System (ADS)

    Shuja Syed, Ahmed

    2013-12-01

    The 1st International Conference on Sensing for Industry, Control, Communication & Security Technologies (ICSICCST-2013), took place in Karachi, Pakistan, from 24-26 June 2013. It was organized by Indus University, Karachi, in collaboration with HEJ Research Institute of Chemistry, University of Karachi, Karachi. More than 80 abstracts were submitted to the conference and were double blind-reviewed by an international scientific committee. The topics of the Conference were: Video, Image & Voice Sensing Sensing for Industry, Environment, and Health Automation and Controls Laser Sensors and Systems Displays for Innovative Applications Emerging Technologies Unmanned, Robotic, and Layered Systems Sensing for Defense, Homeland Security, and Law Enforcement The title of the conference, 'Sensing for Industry, Control, Communication & Security Technologies' is very apt in capturing the main issues facing the industry of Pakistan and the world. We believe the sensing industry, particularly in Pakistan, is currently at a critical juncture of its development. The future of the industry will depend on how the industry players choose to respond to the challenge of global competition and opportunities arising from strong growth in the Asian region for which we are pleased to note that the conference covered a comprehensive spectrum of issues with an international perspective. This will certainly assist industry players to make informed decisions in shaping the future of the industry. The conference gathered qualified researchers from developed countries like USA, UK, Sweden, Saudi Arabia, China, South Korea and Malaysia etc whose expertise resulting from the research can be drawn upon to build an exploitable area of new technology that has potential Defense, Homeland Security, and Military applicability. More than 250 researchers/students attended the event and made the event great success as the turnout was 100%. An exceptional line-up of speakers spoke at the occasion. We want

  18. Effects of the April 1st, 2014 GLONASS Outage on GNSS Receivers

    NASA Astrophysics Data System (ADS)

    Blume, F.; Berglund, H. T.; Romero, I.; D'Anastasio, E.

    2014-12-01

    The use of multi-constellation GNSS receivers has been assumed as a way to increase system integrity both by increased coverage during normal operations and failover redundancy in the event of a constellation failure. At approximately 21:00 UTC on April 1st the entire GLONASS constellation was disrupted as illegal ephemeris uploaded to each satellite took effect simultaneously. The outage continued for more than 10 hours. While ephemeris were incorrect, pseudoranges were correctly broadcast on both L1 and L2 and carrier phases were not affected; in the best case, GNSS receivers could be expected to continue to track all signals including GLONASS and at the worst to continue to track GPS and other constellations. It became clear to operators of the GeoNet network in New Zealand that the majority of their 79 GLONASS-enabled receivers experienced total tracking failures. Further detailed analysis of data from these and 315 additional GLONASS-enabled stations worldwide showed that receiver tracking behavior was affected for most receiver brands and models, both for GLONASS and GPS. Findings regarding the impacts of the GLONASS outage on receiver behavior will be highlighted. We use data recorded by GLONASS enabled global sites for the days during, preceding and following the outage to evaluate the impact of the outage on tracking and positioning performance. We observe that for some receiver types the onboard receiver autonomous integrity monitoring (RAIM) failed to ignore the incorrect messages, resulting in degraded GLONASS and GPS tracking and in some cases complete tracking failures and significant data loss. In addition, many of the receivers with clock steering enabled showed outliers in their receiver clock bias estimates that also coincided with the outage. Our results show in detail how different brands, configurations, and distributions of receivers were affected to varying extents, but no common factors are apparent. This event shows that many manufacturers

  19. Research and Prediction of the Application of Multimedia Teaching Aid in Teaching Technical Education on the 2nd Level of Primary Schools

    ERIC Educational Resources Information Center

    Stebila, Ján

    2011-01-01

    The purpose and the main aim of the pedagogic experiment were to practically verify the success of Multimedia Teaching Aid (MTA) in conditions of primary schools. We assumed that the use of our multimedia teaching aid in teaching technical education on the 2nd level of primary schools would significantly affect the level of knowledge of pupils…

  20. Growth, structure, and optical properties of a self-activated crystal: Na2Nd2O(BO3)2

    NASA Astrophysics Data System (ADS)

    Shan, Faxian; Zhang, Guochun; Yao, Jiyong; Xu, Tianxiang; Zhang, Xinyuan; Fu, Ying; Wu, Yicheng

    2015-08-01

    A self-activated crystal Na2Nd2O(BO3)2 has been grown from the Na2O-Nd2O3-B2O3-NaF system. Its structure was determined by single crystal X-ray diffraction, and verified by infrared spectrum and inductively coupled plasma optical emission spectrometry. Na2Nd2O(BO3)2 crystallizes in the monoclinic crystal system, space group P21/c with unit-cell parameters a = 10.804 Å, b = 6.421 Å, c = 10.450 Å, β = 117.95°, Z = 4, and V = 640.4 Å3. Its absorption and emission spectra were measured at room temperature. Based on the absorption spectrum, the spontaneous transition probabilities, fluorescence branch ratio, and the radiation lifetime of 4F3/2 state were calculated. The emission properties under the 355 nm excitation were also evaluated. The electronic structure of Na2Nd2O(BO3)2 was calculated by the first-principles method. The obtained results show that Na2Nd2O(BO3)2 may be a promising microchip laser material.

  1. Explicit formulas for 2nd-order driving terms due to sextupoles and chromatic effects of quadrupoles.

    SciTech Connect

    Wang, C-X. )

    2012-04-25

    Optimization of nonlinear driving terms have become a useful tool for designing storage rings, especially modern light sources where the strong nonlinearity is dominated by the large chromatic effects of quadrupoles and strong sextupoles for chromaticity control. The Lie algebraic method is well known for computing such driving terms. However, it appears that there was a lack of explicit formulas in the public domain for such computation, resulting in uncertainty and/or inconsistency in widely used codes. This note presents explicit formulas for driving terms due to sextupoles and chromatic effects of quadrupoles, which can be considered as thin elements. The computation is accurate to the 4th-order Hamiltonian and 2nd-order in terms of magnet parameters. The results given here are the same as the APS internal note AOP-TN-2009-020. This internal nte has been revised and published here as a Light Source Note in order to get this information into the public domain, since both ELEGANT and OPA are using these formulas.

  2. Study on microstructure and properties of extruded Mg-2Nd-0.2Zn alloy as potential biodegradable implant material.

    PubMed

    Li, Junlei; Tan, Lili; Wan, Peng; Yu, Xiaoming; Yang, Ke

    2015-04-01

    Mg-2Nd-0.2Zn (NZ20) alloy was prepared for the application as biodegradable implant material in this study. The effects of the extrusion process on microstructure, mechanical and corrosion properties of the alloy were investigated. The as-cast alloy was composed of α-Mg matrix and Mg12Nd eutectic compound. The solution treatment could lead to the Mg12Nd phase dissolution and the grain coarsening. The alloy (E1) preheated at 380°C for 1h and extruded at 390°C presents fine grains with amounts of tiny Mg12Nd particles uniformly dispersed throughout the boundaries and the interior of the grains. The alloy (E2) preheated at 480°C for 1h and extruded at 500°C exhibits relatively larger grains with few nano-scale Mg12Nd phase particles dispersed. The alloy of E1, compared with E2, showed relatively lower corrosion rate, higher yield strength and slightly lower elongation. PMID:25686968

  3. [JAN JĘDRZEJEWICZ AND EUROPEAN ASTRONOMY OF THE 2ND HALF OF THE 19TH CENTURY].

    PubMed

    Siuda-Bochenek, Magda

    2015-01-01

    Jan Jędrzejewicz was an amateur astronomer who in the 2nd half of the 19th century created an observation centre, which considering the level of research was comparable to the European ones. Jędrzejewicz settled down in Plonsk in 1862 and worked as a doctor ever since but his greatest passion was astronomy, to which he dedicated all his free time. In 1875 Jędrzejewicz finished the construction of his observatory. He equipped it with basic astronomical and meteorological instruments, then began his observations and with time he became quite skilled in it. Jędrzejewicz focused mainly on binary stars but he also pointed his telescopes at the planets of the solar system, the comets, the Sun, as well as all the phenomena appearing in the sky at that time. Thanks to the variety of the objects observed and the number of observations he stood out from other observers in Poland and took a very good position in the mainstream of the 19th-century astronomy in Europe. Micrometer observations of binary stars made in Płońsk gained recognition in the West and were included in the catalogues of binary stars. Interest in Jędrzejewicz and his observatory was confirmed by numerous references in the English "Nature" magazine.

  4. Report on the 2nd International Consortium on Hallucination Research: evolving directions and top-10 "hot spots" in hallucination research.

    PubMed

    Waters, Flavie; Woods, Angela; Fernyhough, Charles

    2014-01-01

    This article presents a report on the 2nd meeting of the International Consortium on Hallucination Research, held on September 12th and 13th 2013 at Durham University, UK. Twelve working groups involving specialists in each area presented their findings and sought to summarize the available knowledge, inconsistencies in the field, and ways to progress. The 12 working groups reported on the following domains of investigation: cortical organisation of hallucinations, nonclinical hallucinations, interdisciplinary approaches to phenomenology, culture and hallucinations, subtypes of auditory verbal hallucinations, a Psychotic Symptoms Rating Scale multisite study, visual hallucinations in the psychosis spectrum, hallucinations in children and adolescents, Research Domain Criteria behavioral constructs and hallucinations, new methods of assessment, psychological therapies, and the Hearing Voices Movement approach to understanding and working with voices. This report presents a summary of this meeting and outlines 10 hot spots for hallucination research, which include the in-depth examination of (1) the social determinants of hallucinations, (2) translation of basic neuroscience into targeted therapies, (3) different modalities of hallucination, (4) domain convergence in cross-diagnostic studies, (5) improved methods for assessing hallucinations in nonclinical samples, (6) using humanities and social science methodologies to recontextualize hallucinatory experiences, (7) developmental approaches to better understand hallucinations, (8) changing the memory or meaning of past trauma to help recovery, (9) hallucinations in the context of sleep and sleep disorders, and (10) subtypes of hallucinations in a therapeutic context. PMID:24282321

  5. [JAN JĘDRZEJEWICZ AND EUROPEAN ASTRONOMY OF THE 2ND HALF OF THE 19TH CENTURY].

    PubMed

    Siuda-Bochenek, Magda

    2015-01-01

    Jan Jędrzejewicz was an amateur astronomer who in the 2nd half of the 19th century created an observation centre, which considering the level of research was comparable to the European ones. Jędrzejewicz settled down in Plonsk in 1862 and worked as a doctor ever since but his greatest passion was astronomy, to which he dedicated all his free time. In 1875 Jędrzejewicz finished the construction of his observatory. He equipped it with basic astronomical and meteorological instruments, then began his observations and with time he became quite skilled in it. Jędrzejewicz focused mainly on binary stars but he also pointed his telescopes at the planets of the solar system, the comets, the Sun, as well as all the phenomena appearing in the sky at that time. Thanks to the variety of the objects observed and the number of observations he stood out from other observers in Poland and took a very good position in the mainstream of the 19th-century astronomy in Europe. Micrometer observations of binary stars made in Płońsk gained recognition in the West and were included in the catalogues of binary stars. Interest in Jędrzejewicz and his observatory was confirmed by numerous references in the English "Nature" magazine. PMID:26455002

  6. Near infrared emission and energy transfer in Eu2+ - Nd3+ co-doped Ca2BO3Cl

    NASA Astrophysics Data System (ADS)

    Talewar, R. A.; Joshi, C. P.; Moharil, S. V.

    2016-05-01

    Novel near infrared (NIR) emitting phosphor, Ca2BO3Cl:Eu2+, Nd3+ was synthesized by conventional solid-state reaction and characterized with X-ray diffraction, photoluminescence emission, photoluminescence excitation spectra and fluorescence decay measurements. When excited with 400 nm, the phosphor gives broadband emission at 560 nm, which corresponds to the allowed 5d → 4f transition of Eu2+ and an intense NIR emissions in the range 800-1400 nm, which are assigned to the characteristic 4I9/2,11/2,13/2 transitions of Nd3+ ions. The dependence of visible and NIR emissions, decay lifetime and the energy transfer efficiency (ηETE) were investigated in detail. The luminescence spectra, both in visible (VIS) and NIR regions, and decay lifetime curves of Eu2+ have been measured to prove energy transfer (ET) from Eu2+ to Nd3+. These results demonstrate the possibility for enhancing the photovoltaic conversion efficiency of silicon solar cell by modifying the absorption and utilizing the UV to blue part of the solar spectrum where the efficiency of c-Silicon solar cell is low.

  7. VizieR Online Data Catalog: 2nd Cat. of Radial Velocities with Astrometric Data (Kharchenko+, 2007)

    NASA Astrophysics Data System (ADS)

    Kharchenko, N. V.; Scholz, R.-D.; Piskunov, A. E.; Roeser, S.; Schilbach, E.

    2007-06-01

    The catalogue of radial velocities of Galactic stars with high precision astrometric data, 2nd version (CRVAD-2), is the result of a merging of star lists from the All-Sky Compiled Catalogue of 2.5 Million Stars (ASCC-2.5, Cat. I/280) with the General Catalogue of Radial Velocities (GCRV, Cat. III/213) and with other recently published radial velocity lists and catalogues. Cross identification of objects was carried out with help of coordinate, magnitude, colour and/or spectral type criteria. Data from the Catalogue of Components of Double and Multiple Stars (CCDM, Cat. I/274) were taken into account for the identification of multiple system components. Altogether 54907 stars from the ASCC-2.5 were identified with 51762 stars from the RV source catalogues, 3085 stars have secondary components and 30 stars have 3rd components in multiple systems. The CRVAD-2 includes accurate J2000 equatorial coordinates, proper motions and trigonometric parallaxes in the Hipparcos system, Johnson's BV photometric data, spectral types, radial velocities, multiplicity and variability flags. Stars are sorted in the order of increasing right ascension J2000. This catalogue supersedes the previous version numbered . (1 data file).

  8. InAs/GaSb type II superlattices for advanced 2nd and 3rd generation detectors

    NASA Astrophysics Data System (ADS)

    Walther, Martin; Rehm, Robert; Schmitz, Johannes; Fleissner, Joachim; Rutz, Frank; Kirste, Lutz; Scheibner, Ralf; Wendler, Joachim; Ziegler, Johann

    2010-01-01

    InAs/GaSb short-period superlattices (SL) based on GaSb, InAs and AlSb have proven their great potential for high performance infrared detectors. Lots of interest is currently focused on the development of short-period InAs/GaSb SLs for advanced 2nd and 3rd generation infrared detectors between 3 - 30 μm. For the fabrication of mono- and bispectral thermal imaging systems in the mid-wavelength infrared region (MWIR) a manufacturable technology for high responsivity thermal imaging systems has been developed. InAs/GaSb short-period superlattices can be fabricated with up to 1000 periods in the intrinsic region without revealing diffusion limited behavior. This enables the fabrication of InAs/GaSb SL camera systems with high responsivity comparable to state of the art CdHgTe and InSb detectors. The material system is also ideally suited for the fabrication of dual-color MWIR/MWIR InAs/GaSb SL camera systems with high quantum efficiency for missile approach warning systems with simultaneous and spatially coincident detection in both spectral channels.

  9. Universe (2nd edition)

    SciTech Connect

    Kaufmann, W.J. III

    1988-01-01

    A general text on astronomy is presented. The foundations of the science are reviewed, including descriptions of naked-eye observatons of eclipses and planetary motions and such basic tools as Kepler's laws, the fundamental properties of light, and the optics of telescopes. The formation of the solar system is addressed, and the planets and their satellites are discussed individually. Solar science is treated in detail. Stellar evolution is described chronologically from birth to death. Molecular clouds, star clusters, nebulae, neutron stars, black holes, and various other phenomena that occur in the life of a star are examined in the sequence in which they naturally occur. A survey of the Milky Way introduces galactic astronomy. Quasars and cosmology are addressed, including the most recent developments in research. 156 references.

  10. Educational impact of a clinical anatomy workshop on 1st-year orthopedic and rheumatology fellows in Mexico City.

    PubMed

    Saavedra, M A; Villaseñor-Ovies, P; Harfush, L A; Navarro-Zarza, J E; Canoso, J J; Cruz-Domínguez, P; Vargas, A; Hernández-Díaz, C; Chiapas-Gasca, K; Camacho-Galindo, J; Alvarez-Nemegyei, J; Kalish, R A

    2016-05-01

    We aim to study the educational impact of a clinical anatomy workshop in 1st-year orthopedic and rheumatology fellows. First-year rheumatology fellows (N = 17) and a convenience sample of 1st-year orthopedic fellows (N = 14) from Mexico City in the 9th month of training participated in the study. The pre- and the post- workshop tests included the same 20 questions that had to be answered by identification or demonstration of relevant anatomical items. The questions, arranged by anatomical regions, were asked in five dynamic stations. Overall, the 31 participants showed an increase of correct answers, from a median of 6 (range 1 to 12) in the pre-workshop test, to a median of 14 (range 7 to 19) in the post-workshop test. In the pre-workshop test, the correct median answers were 7 (range 2 to 12) in the orthopedic fellows and 5 (range 1 to 10) in the rheumatology fellows (p = 0.297). Corresponding scores in the post-workshop were 15 (range 10 to 19) and 12 (range 7 to 18) (p = 0.026) showing a significant difference favoring the orthopedic group. Our clinical anatomy workshop was efficacious, in the short term, as a teaching instrument for 1st-year orthopedic and rheumatology fellows. The post-workshop scores, although significantly improved in both groups, particularly in the orthopedic fellows, were still suboptimal. Further refinements of our workshop might yield better results.

  11. Gene-Environment Interaction Effects on the Development of Immune Responses in the 1st Year of Life

    PubMed Central

    Hoffjan, Sabine; Nicolae, Dan; Ostrovnaya, Irina; Roberg, Kathy; Evans, Michael; Mirel, Daniel B.; Steiner, Lori; Walker, Karen; Shult, Peter; Gangnon, Ronald E.; Gern, James E.; Martinez, Fernando D.; Lemanske, Robert F.; Ober, Carole

    2005-01-01

    Asthma is a common disease that results from both genetic and environmental risk factors. Children attending day care in the 1st year of life have lower risks for developing asthma, although the mechanism for this “day care” effect is largely unknown. We investigated the interactions between day care exposure in the 1st 6 mo of life and genotypes for 72 polymorphisms at 45 candidate loci and their effects on cytokine response profiles and on the development of atopic phenotypes in the 1st year of life in the Childhood Onset of Asthma (COAST) cohort of children. Six interactions (at four polymorphisms in three loci) with “day care” that had an effect on early-life immune phenotypes were significant at P<.001. The estimated false-discovery rate was 33%, indicating that an estimated four P values correspond to true associations. Moreover, the “day care” effect at some loci was accounted for by the increased number of viral infections among COAST children attending day care, whereas interactions at other loci were independent of the number of viral infections, indicating the presence of additional risk factors associated with day care environment. This study identified significant gene-environment interactions influencing the early patterning of the immune system and the subsequent development of asthma and highlights the importance of considering environmental risk factors in genetic analyses. PMID:15726497

  12. [Functional aspects of pelvic floor surgery].

    PubMed

    Wagenlehner, F M E; Gunnemann, A; Liedl, B; Weidner, W

    2009-11-01

    Pelvic floor dysfunctions are frequently seen in females. The human pelvic floor is a complex structure and heavily stressed throughout female life. Recent findings in the functional anatomy of the pelvic floor have led to a much better understand-ing, on the basis of which enormous improvements in the therapeutic options have arisen. The pelvic floor activity is regulated by three main muscular forces that are responsible for vaginal tension and suspension of the pelvic floor -organs, bladder and rectum. For different reasons laxity in the vagina or its supporting ligaments as a result of altered connective tissue can distort this functional anatomy. A variety of symptoms can derive from these pelvic floor dysfunctions, such as urinary urge and stress incontinence, abnormal bladder emptying, faecal incontinence, obstructive bowel disease syndrome and pelvic pain. Pelvic floor reconstruction is nowadays driven by the concept that in the case of pelvic floor symptoms restoration of the anatomy will translate into restoration of the physiology and ultimately improve the patients' symptoms. The exact surgical reconstruction of the anatomy is there-fore almost exclusively focused on the restoration of the lax pelvic floor ligaments. An exact identification of the anatomic lesions preoperatively is eminently necessary, to allow for an exact anatomic reconstruction with respect to the muscular forces of the pelvic floor.

  13. Scaling on a limestone flooring

    NASA Astrophysics Data System (ADS)

    Carmona-Quiroga, P. M.; Blanco-Varela, M. T.; Martínez-Ramírez, S.

    2012-04-01

    Natural stone can be use on nearly every surface, inside and outside buildings, but decay is more commonly reported from the ones exposed to outdoor aggressively conditions. This study instead, is an example of limestone weathering of uncertain origin in the interior of a residential building. The stone, used as flooring, started to exhibit loss of material in the form of scaling. These damages were observed before the building, localized in the South of Spain (Málaga), was inhabited. Moreover, according to the company the limestone satisfies the following European standards UNE-EN 1341: 2002, UNE-EN 1343: 2003; UNE-EN 12058: 2004 for floorings. Under these circumstances the main objective of this study was to assess the causes of this phenomenon. For this reason the composition of the mortar was determined and the stone was characterized from a mineralogical and petrological point of view. The last material, which is a fossiliferous limestone from Egypt with natural fissure lines, is mainly composed of calcite, being quartz, kaolinite and apatite minor phases. Moreover, under different spectroscopic and microscopic techniques (FTIR, micro-Raman, SEM-EDX, etc) samples of the weathered, taken directly from the buildings, and unweathered limestone tiles were examined and a new mineralogical phase, trona, was identified at scaled areas which are connected with the natural veins of the stone. In fact, through BSE-mapping the presence of sodium has been detected in these veins. This soluble sodium carbonate would was dissolved in the natural waters from which limestone was precipitated and would migrate with the ascendant capilar humidity and crystallized near the surface of the stone starting the scaling phenomenon which in historic masonry could be very damaging. Therefore, the weathering of the limestone would be related with the hygroscopic behaviour of this salt, but not with the constructive methods used. This makes the limestone unable to be used on restoration

  14. PREFACE: PAGES 1st Young Scientists Meeting (YSM) - 'Retrospective views on our planet's future'

    NASA Astrophysics Data System (ADS)

    Margrethe Basse, Ellen

    2010-03-01

    more recent pollution. The concept and format of the 1st PAGES YSM worked very well, and

  15. Crash Tests of Protective Airplane Floors

    NASA Technical Reports Server (NTRS)

    Carden, H. D.

    1986-01-01

    Energy-absorbing floors reduce structural buckling and impact forces on occupants. 56-page report discusses crash tests of energy-absorbing aircraft floors. Describes test facility and procedures; airplanes, structural modifications, and seats; crash dynamics; floor and seat behavior; and responses of anthropometric dummies seated in airplanes. Also presents plots of accelerations, photographs and diagrams of test facility, and photographs and drawings of airplanes before, during, and after testing.

  16. Electrocradiographic Qrs Axis, Q Wave and T-wave Changes in 2nd and 3rd Trimester of Normal Pregnancy

    PubMed Central

    S., Chandrasekharappa; Brid, S.V

    2014-01-01

    Background: Pregnancy although a physiological phenomena affects all the functions of the maternal body and brings about remarkable changes in the cardiovascular system. The cardiovascular changes and many of the physiological adaptations of normal pregnancy alter the physical findings thus, sometimes misleading the diagnosis of heart disease. Pregnancy also brings about various changes in the electrocardiogram, further confusing with that of heart disease. This study is undertaken to highlight the effect of normal pregnancy on the QRS axis, Q wave and T-wave of the Electrocardiogram and thereby helps us to distinguish it from that of pathological changes. Objectives: To study the effect of normal pregnancy on the QRS axis, Q wave and T-wave in the electrocardiogram and to compare with that of normal non pregnant women. Materials and Methods: Fifty normal pregnant women in 2nd and 3rd trimester each between 20– 35 y of age and 50 normal non pregnant women of the same age group were selected for the study. A 12 lead ECG was recorded by using ECG machine with special emphasis on QRS axis, Q wave and T-wave changes and all the parameters were analysed. Results: The ECG changes observed in our study include, deviation of QRS axis towards left as pregnancy advanced, significant increased incidence of occurrence of prominent Q waves in lead II, III and avF in pregnant group (p < 0.05 ) and, T-wave abnormalities like flat and inverted T-waves in lead III, V1 – V3 were more frequent in pregnant group ( p<0.05 ) than in non pregnant group. Conclusion:Normal pregnancy brings about various changes in ECG. These changes during pregnancy should be interpretated with caution by the physicians. It is necessary to understand the normal physiological changes which in turn help us in better management of those with cardiac disease. PMID:25386425

  17. Pelvic floor muscle rehabilitation using biofeedback.

    PubMed

    Newman, Diane K

    2014-01-01

    Pelvic floor muscle exercises have been recommended for urinary incontinence since first described by obstetrician gynecologist Dr. Arnold Kegel more than six decades ago. These exercises are performed to strengthen pelvic floor muscles, provide urethral support to prevent urine leakage, and suppress urgency. In clinical urology practice, expert clinicians also teach patients how to relax the muscle to improve bladder emptying and relieve pelvic pain caused by muscle spasm. When treating lower urinary tract symptoms, an exercise training program combined with biofeedback therapy has been recommended as first-line treatment. This article provides clinical application of pelvic floor muscle rehabilitation using biofeedback as a technique to enhance pelvic floor muscle training.

  18. Side Elevation; 1/4 Plans of Floor Framing, Floor Planking, Roof ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Side Elevation; 1/4 Plans of Floor Framing, Floor Planking, Roof Framing and Roof; Longitudinal Section, Cross Section, End Elevation - Eames Covered Bridge, Spanning Henderson Creek, Oquawka, Henderson County, IL

  19. 17. 4th floor roof, view south, 4th and 5th floor ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    17. 4th floor roof, view south, 4th and 5th floor setback to left and atrium structure to right - Sheffield Farms Milk Plant, 1075 Webster Avenue (southwest corner of 166th Street), Bronx, Bronx County, NY

  20. Assessment of the orbits from the 1st IGS reprocessing campaign (Invited)

    NASA Astrophysics Data System (ADS)

    Griffiths, J.; Gendt, G.; Nischan, T.; Ray, J.

    2009-12-01

    All eight Finals Analysis Centers (ACs) of the International GNSS Service (IGS), plus three allied groups, for a total of eleven contributing ACs, are using the latest models and methodology to reanalyze the history of Global Positioning System (GPS) data collected since 1994 by a global network of tracking stations. The solutions from the contributing ACs will be used to form a fully consistent, long-term set of official IGS products, specifically Earth orientation parameters, clocks, orbits and station coordinates. This is the first such reprocessing campaign by the IGS, which is expected to be complete by mid-November, 2009. A second reprocessing campaign will follow as further updates and improvements are made to the models and methodology. This paper, then, focuses on assessing the reliability and quality of the combined orbits from this first campaign, and making recommendations to be considered in preparation for the second campaign. In our preliminary assessment of the reliability of the combined orbits, we have examined the reprocessed AC orbit estimates from the 1025 days of results until the end of 2007. Each daily AC satellite ephemeris for each pair of consecutive days has been fitted to the extended CODE orbit model, extrapolated to the mid-point epoch between the days, and the geocentric satellite position differences computed to give time series of orbit repeatabilities. Occasional data gaps have been filled by linear interpolation, FFT power spectra computed, and the spectra stacked over the full GPS constellation and lightly smoothed. This preliminary analysis of the midnight discontinuities reveals considerable diversity among AC orbits. Several show broad semi-annual and fortnightly spectral peaks, as well as even harmonics of the GPS draconitic year (1.040 cpy) with varying amplitudes. High-frequency white noise floors can be detected in most AC orbit spectra, with an average sigma of 14 mm and larger. The statistics from preliminary orbit

  1. Eastern Floor of Holden Crater

    NASA Technical Reports Server (NTRS)

    2002-01-01

    (Released 15 April 2002) The Science Today's THEMIS image covers territory on the eastern floor of Holden Crater, which is located in region of the southern hemisphere called Noachis Terra. Holden Crater is 154 km in diameter and named after American Astronomer Edward Holden (1846-1914). This image shows a mottled surface with channels, hills, ridges and impact craters. The largest crater seen in this image is 5 km in diameter. This crater has gullies and what appears to be horizontal layers in its walls. The Story With its beautiful symmetry and gullies radially streaming down to the floor, the dominant crater in this image is an impressive focal point. Yet, it is really just a small crater within a much larger one named Holden Crater. Take a look at the context image to the right to see just how much bigger Holden Crater is. Then come back to the image strip that shows the mottled surface of Holden Crater's eastern floor in greater detail, and count how many hills, ridges, channels, and small impact craters can be seen. No perfectly smooth terrain abounds there, that's for sure. The textured terrain of Holden Crater has been particularly intriguing ever since the Mars Orbital Camera on the Mars Global Surveyor spacecraft found evidence of sedimentary rock layers there that might have formed in lakes or shallow seas in Mars' ancient past. This finding suggests that Mars may have been more like Earth long ago, with water on its surface. Holden Crater might even have held a lake long ago. No one knows for sure, but it's an exciting possibility. Why? If water was once on the surface of Mars long enough to form sedimentary materials, maybe it was there long enough for microbial life to have developed too. (Life as we know it just isn't possible without the long-term presence of liquid water.) The question of life on the red planet is certainly tantalizing, but scientists will need to engage in a huge amount of further investigation to begin to know the answer. That

  2. 16. THIRD FLOOR BLDG. 28A, DETAIL CUTOUT IN FLOOR FOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    16. THIRD FLOOR BLDG. 28A, DETAIL CUTOUT IN FLOOR FOR WOOD BLOCK FLOORING LOOKING EAST. - Fafnir Bearing Plant, Bounded on North side by Myrtle Street, on South side by Orange Street, on East side by Booth Street & on West side by Grove Street, New Britain, Hartford County, CT

  3. [Functional rehabilitation of the pelvic floor].

    PubMed

    Minschaert, M

    2003-09-01

    Pelvic floor revalidation is devoted to conserve perineal functions as statics, urinary continence and sexual harmony. The therapeutics includes preventive and curative actions, and is based upon muscular and neuromuscular properties of pelvic floor. The different steps are: information, local muscular work, behavioral education, biofeedback, functional electrostimulation, intraabdominal pressure control. The therapeutics is only continued if clinical improvement is demonstrated after 10 sessions.

  4. 9 CFR 91.26 - Concrete flooring.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 9 Animals and Animal Products 1 2014-01-01 2014-01-01 false Concrete flooring. 91.26 Section 91.26... LIVESTOCK FOR EXPORTATION Inspection of Vessels and Accommodations § 91.26 Concrete flooring. (a) Pens aboard an ocean vessel shall have a 3 inch concrete pavement, proportioned and mixed to give 2000...

  5. 9 CFR 91.26 - Concrete flooring.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Concrete flooring. 91.26 Section 91.26... LIVESTOCK FOR EXPORTATION Inspection of Vessels and Accommodations § 91.26 Concrete flooring. (a) Pens aboard an ocean vessel shall have a 3 inch concrete pavement, proportioned and mixed to give 2000...

  6. Floor Time: Rethinking Play in the Classroom

    ERIC Educational Resources Information Center

    Kordt-Thomas, Chad; Lee, Ilene M.

    2006-01-01

    Floor time is a play-based, one-to-one approach to helping children develop relationships, language, and thinking. Developed by child psychiatrist Stanley Greenspan, floor time is helpful not only for children with special needs but also for children who are developing typically. It can be used by teachers, caregivers, and families in brief…

  7. Learning4Life on the Exhibit Floor

    ERIC Educational Resources Information Center

    Sullivan, Margaret

    2009-01-01

    The exhibit floor is a wealth of knowledge. One can read, view, and listen to information presented in many formats. Somewhere on the exhibit floor there are experts on every topic, ready and waiting for one's questions. But like any research topic, frequently a structured search is required to find the best answers. This article discusses how to…

  8. 36 CFR 910.60 - Gross floor area.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 36 Parks, Forests, and Public Property 3 2011-07-01 2011-07-01 false Gross floor area. 910.60... DEVELOPMENT AREA Glossary of Terms § 910.60 Gross floor area. Gross floor area is defined in section 1201... of the several floors from the ground floor up of all buildings of a development occurring on a...

  9. Studies of Nondefective Adenovirus 2-Simian Virus 40 Hybrid Viruses III. Base Composition, Molecular Weight, and Conformation of the Ad2+ND1 Genome

    PubMed Central

    Crumpacker, Clyde S.; Henry, Patrick H.; Kakefuda, Tuyoski; Rowe, Wallace P.; Levin, Myron J.; Lewis, Andrew M.

    1971-01-01

    The nondefective adenovirus 2 (Ad2)-simian virus 40 (SV40) hybrid virus, Ad2+ND1, differs from the defective Ad-SV40 hybrid populations previously described, in that this hybrid virus can replicate without the aid of nonhybrid adenovirus helper. Consequently, the deoxyribonucleic acid (DNA) from this virus, which can be obtained free of nonhybrid adenovirus DNA, is well suited for biophysical studies on Ad-SV40 hybrid DNA. Such studies have been performed and demonstrate Ad2+ND1 DNA to have a buoyant density (1.715 g/cm3) and thermal denaturation profile (Tm = 75.1 C) almost identical with nonhybrid Ad2 DNA. Furthermore, its molecular weight, as determined by analytical zone sedimentation and electron microscopy, was 22 × 106 to 25 × 106 daltons, which is also very similar to that determined for Ad2. Electron micrographs showed all of the hybrid molecules to be double-stranded and linear. By using this determination of the molecular weight of Ad2+ND1 DNA and assuming that 1% of this molecule consists of covalently linked SV40 DNA (see companion paper), we calculate that the hybrid DNA molecule contains 220 × 103 to 250 × 103 daltons of SV40 DNA, or the equivalent of one-tenth of the SV40 genome. PMID:4323710

  10. Cloud Occurrence Measurements Over Sea during the 2nd 7 Southeast Asian Studies (7SEAS) Field Campaign in Palawan Archipelago

    NASA Astrophysics Data System (ADS)

    Antioquia, C. T.; Uy, S. N.; Caballa, K.; Lagrosas, N.

    2014-12-01

    Ground based sky imaging cameras have been used to measure cloud cover over an area to aid in radiation budget models. During daytime, certain clouds tend to help decrease atmospheric temperature by obstructing sunrays in the atmosphere. Thus, the detection of clouds plays an important role in the formulation of radiation budget in the atmosphere. In this study, a wide angled sky imager (GoPro Hero 2) was brought on board M/Y Vasco to detect and quantity cloud occurrence over sea during the 2nd 7SEAS field campaign. The camera is just a part of a number of scientific instruments used to measure weather, aerosol chemistry and solar radiation among others. The data collection started during the departure from Manila Bay on 05 September 2012 and went on until the end of the cruise (29 September 2012). The camera was placed in a weather-proof box that is then affixed on a steel mast where other instruments are also attached during the cruise. The data has a temporal resolution of 1 minute, and each image is 500x666 pixels in size. Fig. 1a shows the track of the ship during the cruise. The red, blue, hue, saturation, and value of the pixels are analysed for cloud occurrence. A pixel is considered to "contain" thick cloud if it passes all four threshold parameters (R-B, R/B, R-B/R+B, HSV; R is the red pixel color value, blue is the blue pixel color value, and HSV is the hue saturation value of the pixel) and considered thin cloud if it passes two or three parameters. Fig. 1b shows the daily analysis of cloud occurrence. Cloud occurrence here is quantified as the ratio of the pixels with cloud to the total number of pixels in the data image. The average cloud cover for the days included in this dataset is 87%. These measurements show a big contrast when compared to cloud cover over land (Manila Observatory) which is usually around 67%. During the duration of the cruise, only one day (September 6) has an average cloud occurrence below 50%; the rest of the days have

  11. EDITORIAL: Selected Papers from OMS'07, the 2nd Topical Meeting of the European Optical Society on Optical Microsystems (OMS)

    NASA Astrophysics Data System (ADS)

    Rendina, Ivo; Fazio, Eugenio; Ferraro, Pietro

    2008-06-01

    OMS'07 was the 2nd Topical Meeting of the European Optical Society (EOS) on Optical Microsystems (OMS). It was organized by the EOS in the frame of its international topical meeting activity, and after the success of the inaugural meeting was once again held in Italy, 30 September to 3 October 2007, amidst the wonderful scenery of the Island of Capri. The local organizing committee was composed of researchers from `La Sapienza' University in Rome and the National Council of Research (CNR) in Naples, Italy. A selected group of leading scientists in the field formed the international scientific committee. The conference was fully dedicated to the most recent advancements carried out in the field of optical microsystems. More then 150 scientists coming from five continents attended the conference and more than 100 papers were presented, organized into the following sessions: Photonic cystals and metamaterials Optofluidic microsystems and devices Optical microsystems and devices New characterization methods for materials and devices Application of optical systems Optical sources and photodetectors Optical resonators Nonlinear optic devices Micro-optical devices. Four keynote lecturers were invited for the Plenary sessions: Federico Capasso, Harvard University, USA; Bahram Javidi, University of Connecticut, USA (Distinguished Lecturer, Emeritus of LEOS--IEEE Society); Demetri Psaltis, EPFL, Lausanne, Switzerland; Ammon Yariv, California Institute of Technology, USA. Furthermore, 21 invited speakers opened each session of the conference with their talks. In addition a special session was organized to celebrate eighty years of the Isituto Nazionale di Ottica Applicata (INOA) of CNR. The special invited speaker for this session was Professor Theodor W Hänsch (Nobel Prize in Physics, 2005), who gave a lecture entitled `What can we do with optical frequency combs?' In this special issue of Journal of Optics A: Pure and Applied Optics, a selection of the most interesting

  12. PREFACE: The 2nd International Conference on Geological, Geographical, Aerospace and Earth Sciences 2014 (AeroEarth 2014)

    NASA Astrophysics Data System (ADS)

    Lumban Gaol, Ford; Soewito, Benfano

    2015-01-01

    The 2nd International Conference on Geological, Geographical, Aerospace and Earth Sciences 2014 (AeroEarth 2014), was held at Discovery Kartika Plaza Hotel, Kuta, Bali, Indonesia during 11 - 12 October 2014. The AeroEarth 2014 conference aims to bring together researchers and engineers from around the world. Through research and development, earth scientists have the power to preserve the planet's different resource domains by providing expert opinion and information about the forces which make life possible on Earth. Earth provides resources and the exact conditions to make life possible. However, with the advent of technology and industrialization, the Earth's resources are being pushed to the brink of depletion. Non-sustainable industrial practices are not only endangering the supply of the Earth's natural resources, but are also putting burden on life itself by bringing about pollution and climate change. A major role of earth science scholars is to examine the delicate balance between the Earth's resources and the growing demands of industrialization. Through research and development, earth scientists have the power to preserve the planet's different resource domains by providing expert opinion and information about the forces which make life possible on Earth. We would like to express our sincere gratitude to all in the Technical Program Committee who have reviewed the papers and developed a very interesting Conference Program as well as the invited and plenary speakers. This year, we received 98 papers and after rigorous review, 17 papers were accepted. The participants come from eight countries. There are four Parallel Sessions and two invited Speakers. It is an honour to present this volume of IOP Conference Series: Earth and Environmental Science (EES) and we deeply thank the authors for their enthusiastic and high-grade contributions. Finally, we would like to thank the conference chairmen, the members of the steering committee, the organizing committee

  13. [Analysis of reconstruction procedures for defects of the mouth floor. Report of 96 cases].

    PubMed

    Michelet, V; Duroux, S; Majoufre, C; Caix, P; Siberchicot, F

    1996-12-01

    The aim of this study was to assess the reconstruction of floor of the mouth defects after cancer surgery. The medical records of 140 patients treated between January 1st, 1987 and December 31st, 1995 were reviewed. Ninety-six patients had primary reconstruction: there were 82 cutaneous or osteomyocutaneous flaps and 14 microsurgical transfers. Among these patients 15 had titanium mandibular reconstruction plates. The reconstruction procedures and postoperative follow-up were evaluated. Healing by first intention is appropriate for superficial soft tissue defects. The nasolabial flap is used only for small mucosal defects. A forearm flap should be the first choice treatment for large soft tissue defects owing to its plasticity and reliable vessels. Segmental mandibular resections often imply mandibular reconstruction. Titanium plates may be used alone or with a cutaneous flap. Tolerance of plates after radiotherapy is very good and they are an effective method of reconstruction for fragile patients. PMID:9768172

  14. Male pelvic floor: history and update.

    PubMed

    Dorey, Grace

    2005-08-01

    Our understanding of the male pelvic floor has evolved over more than 2,000 years. Gradually medical science has sought to dispel ancient myths and untruths. The male pelvic floor has many diverse functions. Importantly, it helps to support the abdominal contents, maintains urinary and fecal continence, and plays a major role in gaining and maintaining penile erection. Weakness of the male pelvic floor muscles may cause urinary and fecal incontinence and erectile dysfunction. Function may be restored in each of these areas by a comprehensive pelvic floor muscle training program. Spasm of the pelvic floor muscles may produce pain and require relaxation techniques. Additional research is needed to add further evidence to our knowledge base.

  15. Attitudes towards General Practice: a comparative cross-sectional survey of 1st and 5th year medical students

    PubMed Central

    Kruschinski, Carsten; Wiese, Birgitt; Hummers-Pradier, Eva

    2012-01-01

    Objective: Positive attitudes towards General Practice can be understood as a prerequisite for becoming a General Practitioner (GP) and for collaboration with GPs later on. This study aimed to assess attitudes of medical students at the beginning and the end of medical school. Methods: A total of 160 1st year students at Hannover Medical School were surveyed. Their attitudes were compared to those of 287 5th year students. Descriptive, bi- and multivariate analyses were performed to investigate influences of year of study and gender. Results: Year of study and gender both were associated with the attitudes towards General Practice. The interest in General Practice and patient-orientation (communication, care of older patients with chronic diseases) was higher in 1st year students compared to more advanced students. Female students valued such requirements more than male students, the differences in attitudes between the years of study being more pronounced in male students. Conclusion: Despite some limitations caused by the cross-sectional design, the attitudes towards General Practice competencies changed to their disadvantage during medical school. This suggests a formative influence of the strategies used in medical education. Educational strategies, however, could be used to bring about a change of attitudes in the other direction. PMID:23255966

  16. Ultrasonic Inspection Of The LTAB Floor

    SciTech Connect

    Thomas, G

    2001-07-31

    The National Ignition Facility's (NIF) floor is damaged by transporter operations. Two basic operations, rotating the wheels in place and traversing the floor numerous times can cause failure in the grout layer. The floor is composed of top wear surface (Stonhard) and an osmotic grout layer on top of concrete, Fig. 1. An ultrasonic technique was implemented to assess the condition of the floor as part of a study to determine the damage mechanisms. The study considered damage scenarios and ways to avoid the damage. A possible solution is to install thin steel plates where the transporter traverses on the floor. These tests were conducted with a fully loaded transporter that applies up to 1300 psi loads to the floor. A contact ultrasonic technique evaluated the condition of the grout layer in NIF's floor. Figure 1 displays the configuration of the ultrasonic transducer on the floor. We inspected the floor after wheel rotation damage and after wheel traversal damage. Figure 2a and 2b are photographs of the portable ultrasonic system and data acquisition. We acquired ultrasonic signals in a known pristine area and a damaged area to calibrate the inspection. Figure 3 is a plot of the typical ultrasonic response from an undamaged area (black) overlapped with a signal (red) from a damaged area. The damage area data was acquired at a location next to a hole in the floor that was caused by the transporter. Five megahertz pulses are propagated from the transducer and through a Plexiglas buffer rod into the floor. The ultrasonic pulse reflects from each discontinuity in the floor. The ultrasonic signal reflects from the top surface, the Stonhard-to-grout interface, and the grout to concrete interface. We expect to see reflections from each of these interfaces in an undamaged floor. If the grout layer pulverizes then the high frequency signal cannot traverse the layer and the grout to concrete interface signal will decrease or vanish. The more damage to the grout the more the

  17. 41. Ground level photograph of two floors of skeleton complete ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    41. Ground level photograph of two floors of skeleton complete with 3rd and 4th floors being started,upper floors of county bldg visible - Chicago City Hall, 121 North LaSalle Street, Chicago, Cook County, IL

  18. Typical Newel Post, First Floor Newel Post, Typical Baluster, Typical ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Typical Newel Post, First Floor Newel Post, Typical Baluster, Typical Nosing, First Floor Stringer Profile, Second Floor Stringer Profile - National Home for Disabled Volunteer Soldiers - Battle Mountain Sanitarium, Treasurer's Quarters, 500 North Fifth Street, Hot Springs, Fall River County, SD

  19. Pelvic floor and sexual male dysfunction.

    PubMed

    Pischedda, Antonella; Fusco, Ferdinando; Curreli, Andrea; Grimaldi, Giovanni; Pirozzi Farina, Furio

    2013-04-19

    The pelvic floor is a complex multifunctional structure that corresponds to the genito-urinary-anal area and consists of muscle and connective tissue. It supports the urinary, fecal, sexual and reproductive functions and pelvic statics. The symptoms caused by pelvic floor dysfunction often affect the quality of life of those who are afflicted, worsening significantly more aspects of daily life. In fact, in addition to providing support to the pelvic organs, the deep floor muscles support urinary continence and intestinal emptying whereas the superficial floor muscles are involved in the mechanism of erection and ejaculation. So, conditions of muscle hypotonia or hypertonicity may affect the efficiency of the pelvic floor, altering both the functionality of the deep and superficial floor muscles. In this evolution of knowledge it is possible imagine how the rehabilitation techniques of pelvic floor muscles, if altered and able to support a voiding or evacuative or sexual dysfunction, may have a role in improving the health and the quality of life.

  20. Dunes in a Crater Floor

    NASA Technical Reports Server (NTRS)

    2003-01-01

    [figure removed for brevity, see original site]

    Released 6 August 2003

    This image shows the floor of a crater just north of the Argyre basin in the southern hemisphere. Dark dunes have been pushed up against the northeastern interior rim of the crater, indicating that the prevailing winds blow from the southwest.

    Image information: VIS instrument. Latitude -35.7, Longitude 324.1 East (35.9 West). 19 meter/pixel resolution.

    Note: this THEMIS visual image has not been radiometrically nor geometrically calibrated for this preliminary release. An empirical correction has been performed to remove instrumental effects. A linear shift has been applied in the cross-track and down-track direction to approximate spacecraft and planetary motion. Fully calibrated and geometrically projected images will be released through the Planetary Data System in accordance with Project policies at a later time.

    NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The Thermal Emission Imaging System (THEMIS) was developed by Arizona State University, Tempe, in collaboration with Raytheon Santa Barbara Remote Sensing. The THEMIS investigation is led by Dr. Philip Christensen at Arizona State University. Lockheed Martin Astronautics, Denver, is the prime contractor for the Odyssey project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena.

  1. Ultrasound Imaging of the Pelvic Floor.

    PubMed

    Stone, Daniel E; Quiroz, Lieschen H

    2016-03-01

    This article discusses the background and appraisal of endoluminal ultrasound of the pelvic floor. It provides a detailed anatomic assessment of the muscles and surrounding organs of the pelvic floor. Different anatomic variability and pathology, such as prolapse, fecal incontinence, urinary incontinence, vaginal wall cysts, synthetic implanted material, and pelvic pain, are easily assessed with endoluminal vaginal ultrasound. With pelvic organ prolapse in particular, not only is the prolapse itself seen but the underlying cause related to the anatomic and functional abnormalities of the pelvic floor muscle structures are also visualized.

  2. Impact of volcanic eruptions on the climate of the 1st millennium AD in a comprehensive climate simulation

    NASA Astrophysics Data System (ADS)

    Wagner, Sebastian; Zorita, Eduardo

    2015-04-01

    The climate of the 1st millennium AD shows some remarkable differences compared to the last millennium concerning variation in external forcings. Together with an orbitally induced increased solar insolation during the northern hemisphere summer season and a general lack of strong solar minima, the frequency and intensity of large tropical and extratropical eruptions is decreased. Here we present results of a new climate simulation carried out with the comprehensive Earth System Model MPI-ESM-P forced with variations in orbital, solar, volcanic and greenhouse gas variations and land use changes for the last 2,100 years. The atmospheric model has a horizontal resolution of T63 (approx. 125x125 km) and therefore also allows investigations of regional-to-continental scale climatic phenomena. The volcanic forcing was reconstructed based on a publication by Sigl et al. (2013) using the sulfate records of the NEEM and WAIS ice cores. To obtain information on the aerosol optical depth (AOD) these sulfate records were scaled to an established reconstruction from Crowley and Unterman (2010), which is also a standard forcing in the framework of CMIP5/PMIP3. A comparison between the newly created data set with the Crowley and Unterman dataset reveals that the new reconstruction shows in general weaker intensities, especially of the large tropical outbreaks and fewer northern hemispheric small-to-medium scale eruptions. However, the general pattern in the overlapping period is similar. A hypothesis that can be tested with the simulation is whether the reduced volcanic intensity of the 1st millennium AD contributed to the elevated temperature levels over Europe, evident within a new proxy-based reconstruction. On the other hand, the few but large volcanic eruptions, e.g. the 528 AD event, also induced negative decadal-scale temperature anomalies. Another interesting result of the simulation relates to the 79 AD eruption of the Vesuvius, which caused the collapse of the city of

  3. 9 CFR 91.26 - Concrete flooring.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... composite material diagonally scored one-half inch deep may be used on iron decks instead of wooden flooring... aft with flat side down, and so placed as to provide in-between spaces of 12, 14, 26, and 14...

  4. 9 CFR 91.26 - Concrete flooring.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... composite material diagonally scored one-half inch deep may be used on iron decks instead of wooden flooring... aft with flat side down, and so placed as to provide in-between spaces of 12, 14, 26, and 14...

  5. 9 CFR 91.26 - Concrete flooring.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... composite material diagonally scored one-half inch deep may be used on iron decks instead of wooden flooring... aft with flat side down, and so placed as to provide in-between spaces of 12, 14, 26, and 14...

  6. Magnetic Resonance Imaging (MRI): Dynamic Pelvic Floor

    MedlinePlus

    ... a powerful magnetic field, radio waves and a computer to produce detailed pictures of the pelvic floor, ... powerful magnetic field, radio frequency pulses and a computer to produce detailed pictures of organs, soft tissues, ...

  7. Floor Fractured Craters around Syrtis Major, Mars

    NASA Astrophysics Data System (ADS)

    Bamberg, M.; Jaumann, R.; Asche, H.

    2012-04-01

    Craters around Syrtis Major are eroded and/or refilled. Syrtis Major is one of the large Hesperian-aged volcanic regions on Mars. Basaltic deposits originating from nearby Syrtis Major cover the floor of impact craters. In particular some craters exhibit a fractured floor. Floor Fractured Craters can be divided in types. The grade of erosion and the geologic process, which formed the crater, can be different. Type 1: Crater floor affected by pit chains or narrow crevices which are sometimes discontinuous. Type 2: More developed and dense networks of crevices as type 1. Crevices are wide and deep enough to be detected. A circular moat starts to develop as crevices concentrate along the rim. Type 3: Mainly distinguished from type 2 by the presence of a fully developed circular moat. The flat central part is divided into several blocks by crevices. Type 4: They show also a continuous moat along the rim but the central part consists of many flat-top blocks and small conical mounds. Type 5: Crater floor has many mounds of irregular sizes, but the flattop blocks are absent. It should be noted that the knobby surface shows typical characteristics of chaotic terrains and could be alternatively classified as such. Type 6: Crater without a circular moat, crevices are not fully developed, flat-top blocks are present. Fractured floor could have been reshaped through geologic processes. Floor fractured craters can be found in three different areas. The first area is located in the south-eastern part of Syrtis Major, bordering to the highlands. Volcanic features like lava flow fronts, lava flows and wrinkle ridges dominate this region. The crater floor is separated in sharp-edged plates and the interior seems to be flooded by basaltic material. The second area is in the north of Syrtis Major and transcend to the chaotic terrain further north. Near the martian dichotomy boundary fluvial activity was the decisive process. The crater rims are highly eroded, channels are cutting

  8. Improving conversion yield of fermentable sugars into fuel ethanol in 1st generation yeast-based production processes.

    PubMed

    Gombert, Andreas K; van Maris, Antonius J A

    2015-06-01

    Current fuel ethanol production using yeasts and starch or sucrose-based feedstocks is referred to as 1st generation (1G) ethanol production. These processes are characterized by the high contribution of sugar prices to the final production costs, by high production volumes, and by low profit margins. In this context, small improvements in the ethanol yield on sugars have a large impact on process economy. Three types of strategies used to achieve this goal are discussed: engineering free-energy conservation, engineering redox-metabolism, and decreasing sugar losses in the process. Whereas the two former strategies lead to decreased biomass and/or glycerol formation, the latter requires increased process and/or yeast robustness.

  9. Plasma properties from the multi-wavelength analysis of the November 1st 2003 CME/shock event

    PubMed Central

    Benna, Carlo; Mancuso, Salvatore; Giordano, Silvio; Gioannini, Lorenzo

    2012-01-01

    The analysis of the spectral properties and dynamic evolution of a CME/shock event observed on November 1st 2003 in white-light by the LASCO coronagraph and in the ultraviolet by the UVCS instrument operating aboard SOHO, has been performed to compute the properties of some important plasma parameters in the middle corona below about 2R⊙. Simultaneous observations obtained with the MLSO/Mk4 white-light coronagraph, providing both the early evolution of the CME expansion in the corona and the pre-shock electron density profile along the CME front, were also used to study this event. By combining the above information with the analysis of the metric type II radio emission detected by ground-based radio spectrographs, we finally derive estimates of the values of the local Alfvén speed and magnetic field strength in the solar corona. PMID:25685432

  10. [Epidermoid cyst of the mouth floor].

    PubMed

    Sanjuán Rodríguez, S; Morán Penco, J M; Ruiz Orpez, A; Santamaria Ossorio, J I; Berchi García, F J

    2003-07-01

    The epidermoid cysts are frequent during childhood, however mouth floor location are very unusual, because of their more difficult diagnosis and therapeutic approach. We present a 5 years old male, symptoms free until a week before, when his parents noticed a well defined mass in the mouth floor. A physical examination leaded to the diagnosis of possible epidermoid cyst. The tumor was excised through an introral approach. A review of different diagnostic means and surgical management are undertaken.

  11. [Functional rehabilitation of the pelvic floor].

    PubMed

    Minschaert, M

    2003-09-01

    Pelvic floor revalidation is devoted to conserve perineal functions as statics, urinary continence and sexual harmony. The therapeutics includes preventive and curative actions, and is based upon muscular and neuromuscular properties of pelvic floor. The different steps are: information, local muscular work, behavioral education, biofeedback, functional electrostimulation, intraabdominal pressure control. The therapeutics is only continued if clinical improvement is demonstrated after 10 sessions. PMID:14606287

  12. Levels of innate immune factors in preterm and term mothers' breast milk during the 1st month postpartum.

    PubMed

    Trend, Stephanie; Strunk, Tobias; Lloyd, Megan L; Kok, Chooi Heen; Metcalfe, Jessica; Geddes, Donna T; Lai, Ching Tat; Richmond, Peter; Doherty, Dorota A; Simmer, Karen; Currie, Andrew

    2016-04-14

    There is a paucity of data on the effect of preterm birth on the immunological composition of breast milk throughout the different stages of lactation. We aimed to characterise the effects of preterm birth on the levels of immune factors in milk during the 1st month postpartum, to determine whether preterm milk is deficient in antimicrobial factors. Colostrum (days 2-5 postpartum), transitional milk (days 8-12) and mature milk (days 26-30) were collected from mothers of extremely preterm (<28 weeks of gestation, n 15), very preterm (28-<32 weeks of gestation, n 15), moderately preterm (32-<37 weeks of gestation, n 15) and term infants (37-41 weeks of gestation, n 15). Total protein, lactoferrin, secretory IgA, soluble CD14 receptor (sCD14), transforming growth factor-β2 (TGF-β2), α defensin 5 (HD5), β defensins 1 (HBD1) and 2, IL-6, IL-10, IL-13, interferon-γ, TNF-α and lysozyme (LZ) were quantified in milk. We examined the effects of lactation stage, gestational age, volume of milk expressed, mode of delivery, parity and maternal infection on milk immune factor concentrations using repeated-measures regression analysis. The concentrations of all factors except LZ and HD5 decreased over the 1st month postpartum. Extremely preterm mothers had significantly higher concentrations of HBD1 and TGF-β2 in colostrum than term mothers did. After controlling for other variables in regression analyses, preterm birth was associated with higher concentrations of HBD1, LZ and sCD14 in milk samples. In conclusion, preterm breast milk contains significantly higher concentrations of some immune proteins than term breast milk.

  13. Physical therapy for female pelvic floor disorders.

    PubMed

    Bourcier, A P

    1994-08-01

    Non-surgical, non-pharmacological treatment for female pelvic floor dysfunction is represented by rehabilitation in urogynecology. Since Kegel, in 1948, who proposed the concept of functional restoration of the perineal muscles, no specific term has actually been established. Owing to the number of specialists involved in the management of female pelvic floor disorders (such as gynecologists, urologists, coloproctologists, and neurologists) and the different types of health care providers concerned (such as physicians, physical therapists, nurses, and midwives), it is difficult to make the proper choice between 'physical therapy for pelvic floor', 'pelvic floor rehabilitation', 'pelvic muscle re-education', and 'pelvic floor training'. Because muscle re-education is under the control of physical therapists, we have chosen the term of physical therapy for female pelvic floor disorders. Muscle re-education has an important role in the primary treatment of lower urinary tract dysfunction. A multidisciplinary collaboration may be of particular interest, and a thorough evaluation is useful for a proper selection of patients.

  14. ETRA, TRA642. ON BASEMENT FLOOR. IBEAM COLUMNS SUPPORTING CONSOLE FLOOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    ETRA, TRA-642. ON BASEMENT FLOOR. I-BEAM COLUMNS SUPPORTING CONSOLE FLOOR HAVE BEEN SURROUNDED BY CONCRETE IN RECTANGULAR PILLARS. BASEMENT FLOOR IS BEING PREPARED FOR PLACEMENT OF CONCRETE. ABOVE CEILING IS CONSOLE FLOOR, IN WHICH CUT-OUT HAS PRESERVED SPACE FOR REACTOR AND ITS SHIELDING. CIRCULAR FORM IN REACTOR AREA IS CONCRETE FORMING. NOTE VERTICAL CONDUIT AT INTERVALS AROUND REACTOR PITS. INL NEGATIVE NO. 56-1237. Jack L. Anderson, Photographer, 4/17/1956 - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

  15. Nonlinearly generated harmonic signals in ultra-small waveguides with magnetic films: Tunable enhancements of 2nd and 4th harmonics

    NASA Astrophysics Data System (ADS)

    Marsh, J.; Zagorodnii, V.; Celinski, Z.; Camley, R. E.

    2012-03-01

    The nonlinear generation of high harmonic signals (up to 5th harmonic) is explored in an ultra-small waveguide which contains a thin ferromagnetic film. The strength of the different harmonics is highly tunable. In particular, the power in the 2nd and 4th harmonic signals may be enhanced by over two orders of magnitude by varying the direction of a static magnetic field with respect to the long axis of the waveguide. In contrast, the 3rd and 5th harmonics are relatively insensitive to the direction of the magnetic field. The experimental results are explained by analytical and numerical calculations.

  16. Social and moral norm differences among Portuguese 1st and 6th year medical students towards their intention to comply with hand hygiene.

    PubMed

    Roberto, Magda S; Mearns, Kathryn; Silva, Silvia A

    2012-01-01

    This study examines social and moral norms towards the intention to comply with hand hygiene among Portuguese medical students from 1st and 6th years (N = 175; 121 from the 1st year, 54 from the 6th year). The study extended the theory of planned behaviour theoretical principles and hypothesised that both subjective and moral norms will be the best predictors of 1st and 6th year medical students' intention to comply with hand hygiene; however, these predictors ability to explain intention variance will change according to medical students' school year. Results indicated that the subjective norm, whose referent focuses on professors, is a relevant predictor of 1st year medical students' intention, while the subjective norm that emphasises the relevance of colleagues predicts the intentions of medical students from the 6th year. In terms of the moral norm, 6th year students' intention is better predicted by a norm that interferes with compliance; whereas intentions from 1st year students are better predicted by a norm that favours compliance. Implications of the findings highlight the importance of role models and mentors as key factors in teaching hand hygiene in medical undergraduate curricula. PMID:22111788

  17. PREFACE: 2nd International Conference on Particle Physics in memoriam Engin Arık and her Colleagues

    NASA Astrophysics Data System (ADS)

    Çetin, Serkant Ali; Jenni, Peter; Erkcan Özcan, Veysi; Nefer Şenoğuz, Vedat

    2012-02-01

    The 2nd International Conference on Particle Physics in memoriam Engin Arık and her Colleagues: Fatma Şenel Boydağ, İskender Hikmet, Mustafa Fidan, Berkol Doğan and Engin Abat was held at Doğuş University, İstanbul, Turkey on 20-25 June 2011. The conference was organized jointly by the Doğuş and Boğaziçi Universities, with support from CERN and the Turkish Academy of Sciences. This was the second International Conference on Particle Physics (ICPP) organized in memory of Engin Arık and her Colleagues who lost their lives in the tragic plane accident on November 30 2007, on their way to the workshop of the Turkish Accelerator Center (TAC) Project. The first of this conference series was held on 27-31 October 2008 at Boğaziçi University, İstanbul, Turkey. The conference is intended to be repeated every two years in Istanbul as a Conference Series under the name 'ICPP-Istanbul'. Professor Engin Arık had a pioneering role in experimental particle physics in Turkey, and was an inspiring teacher to many colleagues. She led the Turkish participation in experiments at CERN such as CHARMII, SMC, CHORUS, ATLAS and CAST. One of her latest involvements was in the national project to design the Turkish Accelerator Center with the collaboration of 10 Turkish universities including Doğuş and Boğaziçi. Our dear colleagues not only participated in the TAC project but also collaborated on the ATLAS (E Arık, E Abat and B Doğan) and CAST (E Arık, F Şenel Boydağ, İ Hikmet and B Doğan) experiments. We believe that the ICPP-Istanbul conference series has been, and will always be, a way to commemorate them in a most appropriate context. The topics covered in ICPP-Istanbul-II were 'LHC Physics and Tevatron Results', 'Neutrinos and Dark Matter', 'Particle Factories' and 'Accelerator Physics and Future TeV Scale Colliders'. The main emphasis was on the recent experimental results in high-energy physics with discussions on expectations from existing or future

  18. 2. VIEW OF LOWER MILL FLOOR FOUNDATION, SHOWING, LEFT TO ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    2. VIEW OF LOWER MILL FLOOR FOUNDATION, SHOWING, LEFT TO RIGHT, EDGE OF MILLING FLOOR, TABLE FLOOR, VANNING FLOOR, LOADING LEVEL, TAILINGS POND IN RIGHT BACKGROUND. VIEW IS LOOKING FROM THE NORTHWEST - Mountain King Gold Mine & Mill, 4.3 Air miles Northwest of Copperopolis, Copperopolis, Calaveras County, CA

  19. Indirect orbital floor fractures: a meta-analysis.

    PubMed

    Gonzalez, Mithra O; Durairaj, Vikram D

    2010-04-01

    Orbit fractures are common in the context of orbital trauma. Fractures of the orbital floor without orbital rim involvement are known as indirect orbital floor fractures, pure internal floor fractures, and orbital blowout fractures. In this paper, we have reported a meta-analysis of orbital floor fractures focusing on indications and timing of surgical repair, outcomes, and complications. PMID:20616920

  20. 76 FR 7098 - Dealer Floor Plan Pilot Program

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-02-09

    ... ADMINISTRATION 13 CFR Parts 120 and 121 Dealer Floor Plan Pilot Program AGENCY: U.S. Small Business... Dealer Floor Plan Pilot Program to make available 7(a) loan guaranties for lines of credit that provide floor plan financing. This new Dealer Floor Plan Pilot Program was created in the Small Business...

  1. Branching ratio and angular distribution of ejected electrons from Eu 4f76p1/2nd auto-ionizing states

    NASA Astrophysics Data System (ADS)

    Wu, Xiao-Rui; Shen, Li; Zhang, Kai; Dai, Chang-Jian; Yang, Yu-Na

    2016-09-01

    The branching ratios of ions and the angular distributions of electrons ejected from the Eu 4f76p1/2nd auto-ionizing states are investigated with the velocity-map-imaging technique. To populate the above auto-ionizing states, the relevant bound Rydberg states have to be detected first. Two new bound Rydberg states are identified in the region between 41150 cm‑1 and 44580 cm‑1, from which auto-ionization spectra of the Eu 4f76p1/2nd states are observed with isolated core excitation method. With all preparations above, the branching ratios from the above auto-ionizing states to different final ionic states and the angular distributions of electrons ejected from these processes are measured systematically. Energy dependence of branching ratios and anisotropy parameters within the auto-ionization spectra are carefully analyzed, followed by a qualitative interpretation. Project supported by the National Natural Science Foundation of China (Grant No. 11174218).

  2. Hyperfine structure and lifetime measurements in the 4s2nd 2D3/2 Rydberg sequence of Ga I by time-resolved laser spectroscopy

    NASA Astrophysics Data System (ADS)

    Liu, Chunqing; Tian, Yanshan; Yu, Qi; Bai, Wanshuang; Wang, Xinghao; Wang, Chong; Dai, Zhenwen

    2016-05-01

    The hyperfine structure (HFS) constants of the 4s2nd 2D3/2 (n=6-18) Rydberg sequence and the 4s26p 2P3/2 level for two isotopes of 69Ga and 71Ga atoms were measured by means of the time-resolved laser-induced fluorescence (TR-LIF) technique and the quantum beat method. The observed hyperfine quantum beat spectra were analyzed and the magnetic-dipole HFS constants A as well as the electric-quadrupole HFS constants B of these levels were obtained by Fourier transform and a program for multiple regression analysis. Also using TR-LIF method radiative lifetimes of the above sequence states were determined at room temperature. The measured lifetime values range from 69 to 2279 ns with uncertainties no more than 10%. To our knowledge, the HFS constants of this Rydberg sequence and the lifetimes of the 4s2nd 2D3/2 (n=10-18) levels are reported for the first time. Good agreement between our results and the previous is achieved.

  3. Branching ratio and angular distribution of ejected electrons from Eu 4f76p1/2nd auto-ionizing states

    NASA Astrophysics Data System (ADS)

    Wu, Xiao-Rui; Shen, Li; Zhang, Kai; Dai, Chang-Jian; Yang, Yu-Na

    2016-09-01

    The branching ratios of ions and the angular distributions of electrons ejected from the Eu 4f76p1/2nd auto-ionizing states are investigated with the velocity-map-imaging technique. To populate the above auto-ionizing states, the relevant bound Rydberg states have to be detected first. Two new bound Rydberg states are identified in the region between 41150 cm-1 and 44580 cm-1, from which auto-ionization spectra of the Eu 4f76p1/2nd states are observed with isolated core excitation method. With all preparations above, the branching ratios from the above auto-ionizing states to different final ionic states and the angular distributions of electrons ejected from these processes are measured systematically. Energy dependence of branching ratios and anisotropy parameters within the auto-ionization spectra are carefully analyzed, followed by a qualitative interpretation. Project supported by the National Natural Science Foundation of China (Grant No. 11174218).

  4. Carbon dioxide emissions and the overshoot ratio change resulting from the implementation of 2nd Energy Master Plan in South Korea

    NASA Astrophysics Data System (ADS)

    Yeo, M. J.; Kim, Y. P.

    2015-12-01

    The direction of the energy policies of the country is important in the projection of environmental impacts of the country. The greenhouse gases (GHGs) emission of the energy sector in South Korea is very huge, about 600 MtCO2e in 2011. Also the carbon footprint due to the energy consumption contributes to the ecological footprint is also large, more than 60%. Based on the official plans (the national greenhouse gases emission reduction target for 2030 (GHG target for 2030) and the 2nd Energy Master Plan (2nd EMP)), several scenarios were proposed and the sensitivity of the GHG emission amount and 'overshoot ratio' which is the ratio of ecological footprint to biocapacity were estimated. It was found that to meet the GHG target for 2030 the ratio of non-emission energy for power generation should be over 71% which would be very difficult. We also found that the overshoot ratio would increase from 5.9 in 2009 to 7.6 in 2035. Thus, additional efforts are required to reduce the environmental burdens in addition to optimize the power mix configuration. One example is the conversion efficiency in power generation. If the conversion efficiency in power generation rises up 50% from the current level, 40%, the energy demand and resultant carbon dioxide emissions would decrease about 10%. Also the influence on the environment through changes in consumption behavior, for example, the diet choice is expected to be meaningful.

  5. ETR, TRA642. FLOOR PLAN UNDER BALCONY ON CONSOLE FLOOR. MOTORGENERATOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    ETR, TRA-642. FLOOR PLAN UNDER BALCONY ON CONSOLE FLOOR. MOTOR-GENERATOR SETS AND OTHER ELECTRICAL EQUIPMENT. PHILLIPS PETROLEUM COMPANY ETR-D-1781, 7/1960. INL INDEX NO. 532-0642-00-706-020384, REV. 1. - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

  6. Total pelvic floor ultrasound for pelvic floor defaecatory dysfunction: a pictorial review.

    PubMed

    Hainsworth, Alison J; Solanki, Deepa; Schizas, Alexis M P; Williams, Andrew B

    2015-01-01

    Total pelvic floor ultrasound is used for the dynamic assessment of pelvic floor dysfunction and allows multicompartmental anatomical and functional assessment. Pelvic floor dysfunction includes defaecatory, urinary and sexual dysfunction, pelvic organ prolapse and pain. It is common, increasingly recognized and associated with increasing age and multiparity. Other options for assessment include defaecation proctography and defaecation MRI. Total pelvic floor ultrasound is a cheap, safe, imaging tool, which may be performed as a first-line investigation in outpatients. It allows dynamic assessment of the entire pelvic floor, essential for treatment planning for females who often have multiple diagnoses where treatment should address all aspects of dysfunction to yield optimal results. Transvaginal scanning using a rotating single crystal probe provides sagittal views of bladder neck support anteriorly. Posterior transvaginal ultrasound may reveal rectocoele, enterocoele or intussusception whilst bearing down. The vaginal probe is also used to acquire a 360° cross-sectional image to allow anatomical visualization of the pelvic floor and provides information regarding levator plate integrity and pelvic organ alignment. Dynamic transperineal ultrasound using a conventional curved array probe provides a global view of the anterior, middle and posterior compartments and may show cystocoele, enterocoele, sigmoidocoele or rectocoele. This pictorial review provides an atlas of normal and pathological images required for global pelvic floor assessment in females presenting with defaecatory dysfunction. Total pelvic floor ultrasound may be used with complementary endoanal ultrasound to assess the sphincter complex, but this is beyond the scope of this review. PMID:26388109

  7. ETR ELECTRICAL BUILDING, TRA648. FLOOR PLANS FOR FIRST FLOOR AND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    ETR ELECTRICAL BUILDING, TRA-648. FLOOR PLANS FOR FIRST FLOOR AND BASEMENT. SECTIONS. KAISER ETR-5528-MTR-648-A-2, 12/1955. INL INDEX NO. 532-0648-00-486-101402, REV. 6. - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

  8. 24. FIFTH FLOOR BLDG. 28B, DETAIL WOOD BLOCK FLOORING LOOKING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    24. FIFTH FLOOR BLDG. 28B, DETAIL WOOD BLOCK FLOORING LOOKING NORTH. - Fafnir Bearing Plant, Bounded on North side by Myrtle Street, on South side by Orange Street, on East side by Booth Street & on West side by Grove Street, New Britain, Hartford County, CT

  9. 23. FIFTH FLOOR BLDG. 28B, DETAIL WOOD BLOCK FLOORING LOOKING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    23. FIFTH FLOOR BLDG. 28B, DETAIL WOOD BLOCK FLOORING LOOKING WEST. - Fafnir Bearing Plant, Bounded on North side by Myrtle Street, on South side by Orange Street, on East side by Booth Street & on West side by Grove Street, New Britain, Hartford County, CT

  10. LOFT, TAN650. Service building preamp tower, top three floors. Floor ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    LOFT, TAN-650. Service building pre-amp tower, top three floors. Floor plan, cable mazes, duct labyrinth. Borated water tank enclosure on roof. Kaiser engineers 6413-11-STEP/LOFT-650-A-3. Date: October 1964. INEEL index code no. 036-650-00-486-122215 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

  11. Evaluation of cage floor systems for production of commercial broilers.

    PubMed

    Akpobome, G O; Fanguy, R C

    1992-02-01

    Flooring materials evaluated consisted of three types of mesh (wire, steel, and plastic), three types of perforated floor (wood, styrofoam, and plastic), and three types of doweling (rigid, rotating, and padded). A solid wood floor with wood shavings litter served as a control. Parameters measured included body weight at 4, 6, and 8 wk and dressed carcass weight. Breast blisters, feather soilage, broken bones, feed consumption, percentage abdominal fat, and mortality rate for each floor type were also evaluated. Birds grown on wire mesh floors experienced a significant reduction in live body weight at 6 and 8 wk of age when compared with all other floor types tested. The remaining experimental floor types were comparable to the litter floor control group when using body weight as the performance criterion. The mesh floors experienced the highest incidence of breast blisters and the padded dowel group experienced the least. Feather soilage was a problem only with the perforated wood and styrofoam floor systems. Abdominal fat did not seem to be related to experimental floor type. The incidence of wing breakage during processing was significantly greater than leg breakage for all floor systems tested. Mortality was only a problem with the birds reared on wire mesh floors. The overall data suggests that a padded dowel floor system can be used to produce cage broilers about 2,500 g in weight without leg or breast damage and that these birds will be equivalent to those currently produced by the industry on a litter floor system.

  12. Synthetic biomaterials for pelvic floor reconstruction.

    PubMed

    Karlovsky, Matthew E; Kushner, Leslie; Badlani, Gopal H

    2005-09-01

    Pelvic organ prolapse and stress urinary incontinence increase with age. The increasing proportion of the aging female population is likely to result in a demand for care of pelvic floor prolapse and incontinence. Experimental evidence of altered connective tissue metabolism may predispose to pelvic floor dysfunction, supporting the use of biomaterials, such as synthetic mesh, to correct pelvic fascial defects. Re-establishing pelvic support and continence calls for a biomaterial to be inert, flexible, and durable and to simultaneously minimize infection and erosion risk. Mesh as a biomaterial has evolved considerably throughout the past half century to the current line that combines ease of use, achieves good outcomes, and minimizes risk. This article explores the biochemical basis for pelvic floor attenuation and reviews various pelvic reconstructive mesh materials, their successes, failures, complications, and management.

  13. Pathophysiology of pelvic floor hypertonic disorders.

    PubMed

    Butrick, Charles W

    2009-09-01

    The pelvic floor represents the neuromuscular unit that provides support and functional control for the pelvic viscera. Its integrity, both anatomic and functional, is the key in some of the basic functions of life: storage of urine and feces, evacuation of urine and feces, support of pelvic organs, and sexual function. When this integrity is compromised, the results lead to many of the problems seen by clinicians. Pelvic floor dysfunction can involve weakness and result in stress incontinence, fecal incontinence, and pelvic organ prolapse. Pelvic floor dysfunction can also involve the development of hypertonic, dysfunctional muscles. This article discusses the pathophysiology of hypertonic disorders that often result in elimination problems, chronic pelvic pain, and bladder disorders that include bladder pain syndromes, retention, and incontinence. The hypertonic disorders are very common and are often not considered in the evaluation and management of patients with these problems.

  14. Frontline nilotinib in patients with chronic myeloid leukemia in chronic phase: results from the European ENEST1st study

    PubMed Central

    Hochhaus, A; Rosti, G; Cross, N C P; Steegmann, J L; le Coutre, P; Ossenkoppele, G; Petrov, L; Masszi, T; Hellmann, A; Griskevicius, L; Wiktor-Jedrzejczak, W; Rea, D; Coriu, D; Brümmendorf, T H; Porkka, K; Saglio, G; Gastl, G; Müller, M C; Schuld, P; Di Matteo, P; Pellegrino, A; Dezzani, L; Mahon, F-X; Baccarani, M; Giles, F J

    2016-01-01

    The Evaluating Nilotinib Efficacy and Safety in Clinical Trials as First-Line Treatment (ENEST1st) study included 1089 patients with newly diagnosed chronic myeloid leukemia in chronic phase. The rate of deep molecular response (MR4 (BCR-ABL1⩽0.01% on the International Scale or undetectable BCR-ABL1 with ⩾10 000 ABL1 transcripts)) at 18 months was evaluated as the primary end point, with molecular responses monitored by the European Treatment and Outcome Study network of standardized laboratories. This analysis was conducted after all patients had completed 24 months of study treatment (80.9% of patients) or discontinued early. In patients with typical BCR-ABL1 transcripts and ⩽3 months of prior imatinib therapy, 38.4% (404/1052) achieved MR4 at 18 months. Six patients (0.6%) developed accelerated or blastic phase, and 13 (1.2%) died. The safety profile of nilotinib was consistent with that of previous studies, although the frequencies of some nilotinib-associated adverse events were lower (for example, rash, 21.4%). Ischemic cardiovascular events occurred in 6.0% of patients. Routine monitoring of lipid and glucose levels was not mandated in the protocol. These results support the use of frontline nilotinib, particularly when achievement of a deep molecular response (a prerequisite for attempting treatment-free remission in clinical trials) is a treatment goal. PMID:26437782

  15. Stem Cell Gene Therapy for Fanconi Anemia: Report from the 1st International Fanconi Anemia Gene Therapy Working Group Meeting

    PubMed Central

    Tolar, Jakub; Adair, Jennifer E; Antoniou, Michael; Bartholomae, Cynthia C; Becker, Pamela S; Blazar, Bruce R; Bueren, Juan; Carroll, Thomas; Cavazzana-Calvo, Marina; Clapp, D Wade; Dalgleish, Robert; Galy, Anne; Gaspar, H Bobby; Hanenberg, Helmut; Von Kalle, Christof; Kiem, Hans-Peter; Lindeman, Dirk; Naldini, Luigi; Navarro, Susana; Renella, Raffaele; Rio, Paula; Sevilla, Julián; Schmidt, Manfred; Verhoeyen, Els; Wagner, John E; Williams, David A; Thrasher, Adrian J

    2011-01-01

    Survival rates after allogeneic hematopoietic cell transplantation (HCT) for Fanconi anemia (FA) have increased dramatically since 2000. However, the use of autologous stem cell gene therapy, whereby the patient's own blood stem cells are modified to express the wild-type gene product, could potentially avoid the early and late complications of allogeneic HCT. Over the last decades, gene therapy has experienced a high degree of optimism interrupted by periods of diminished expectation. Optimism stems from recent examples of successful gene correction in several congenital immunodeficiencies, whereas diminished expectations come from the realization that gene therapy will not be free of side effects. The goal of the 1st International Fanconi Anemia Gene Therapy Working Group Meeting was to determine the optimal strategy for moving stem cell gene therapy into clinical trials for individuals with FA. To this end, key investigators examined vector design, transduction method, criteria for large-scale clinical-grade vector manufacture, hematopoietic cell preparation, and eligibility criteria for FA patients most likely to benefit. The report summarizes the roadmap for the development of gene therapy for FA. PMID:21540837

  16. Embryonic development of chicken (Gallus Gallus Domesticus) from 1st to 19th day-ectodermal structures.

    PubMed

    Toledo Fonseca, Erika; De Oliveira Silva, Fernanda Menezes; Alcântara, Dayane; Carvalho Cardoso, Rafael; Luís Franciolli, André; Sarmento, Carlos Alberto Palmeira; Fratini, Paula; José Piantino Ferreira, Antônio; Miglino, Maria Angélica

    2013-12-01

    Birds occupy a prominent place in the Brazilian economy not only in the poultry industry but also as an animal model in many areas of scientific research. Thus the aim of this study was to provide a description of macro and microscopic aspects of the ectoderm-derived structures in chicken embryos / fetuses poultry (Gallus gallus domesticus) from 1st to 19th day of incubation. 40 fertilized eggs, from a strain of domestic chickens, with an incubation period of 2-19 days were subjected to macroscopic description, biometrics, light, and scanning microscopy. All changes observed during the development were described. The nervous system, skin and appendages and organs related to vision and hearing began to be identified, both macro and microscopically, from the second day of incubation. The vesicles from the primitive central nervous system-forebrain, midbrain, and hindbrain-were identified on the third day of incubation. On the sixth day of incubation, there was a clear vascularization of the skin. The optic vesicle was first observed fourth day of development and on the fifth day there was the beginning of the lens formation. Although embryonic development is influenced by animal line as well as external factors such as incubation temperature, this paper provides a chronological description for chicken (Gallus gallus domesticus) during its embryonic development. PMID:24019213

  17. 1st Quarter Transportation Report FY 2015: Radioactive Waste Shipments to and from the Nevada National Security Site (NNSS)

    SciTech Connect

    Gregory, Louis

    2015-02-20

    This report satisfies the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Field Office (NNSA/NFO) commitment to prepare a quarterly summary report of radioactive waste shipments to and from the Nevada National Security Site (NNSS) Radioactive Waste Management Complex (RWMC) at Area 5. There were no shipments sent for offsite treatment and returned to the NNSS this quarter. This report summarizes the 1st quarter of Fiscal Year (FY) 2015 low-level radioactive waste (LLW) and mixed low-level radioactive waste (MLLW) shipments. Tabular summaries are provided which include the following: Sources of and carriers for LLW and MLLW shipments to and from the NNSS; Number and external volume of LLW and MLLW shipments; Highway routes used by carriers; and Incident/accident data applicable to LLW and MLLW shipments. In this report shipments are accounted for upon arrival at the NNSS, while disposal volumes are accounted for upon waste burial. The disposal volumes presented in this report include minor volumes of non-radioactive classified waste/material that were approved for disposal (non-radioactive classified or nonradioactive classified hazardous). Volume reports showing cubic feet generated using the Low-Level Waste Information System may vary slightly due to rounding conventions for volumetric conversions from cubic meters to cubic feet.

  18. A collaborative study to establish the 1st WHO International Standard for human cytomegalovirus for nucleic acid amplification technology.

    PubMed

    Fryer, Jacqueline F; Heath, Alan B; Minor, Philip D

    2016-07-01

    Variability in the performance of nucleic acid amplification technology (NAT)-based assays presents a significant problem in the diagnosis and management of human cytomegalovirus (HCMV) infections. Here we describe a collaborative study to evaluate the suitability of candidate reference materials to harmonize HCMV viral load measurements in a wide range of NAT assays. Candidate materials comprised lyophilized Merlin virus, liquid Merlin virus, liquid AD169 virus, and purified HCMV Merlin DNA cloned into a bacterial artificial chromosome. Variability in the laboratory mean HCMV concentrations determined for virus samples across the different assays was 2 log10. Variability for the purified DNA sample was higher (>3 log10). The agreement between laboratories was markedly improved when the potencies of the liquid virus samples were expressed relative to the lyophilized virus candidate. In contrast, the agreement between laboratories for the purified DNA sample was not improved. Results indicated the suitability of the lyophilized Merlin virus preparation as the 1st WHO International Standard for HCMV for NAT. It was established in October 2010, with an assigned potency of 5 × 10(6) International Units (IU) (NIBSC code 09/162). It is intended to be used to calibrate secondary references, used in HCMV NAT assays, in IU. PMID:27179913

  19. Embryonic development of chicken (Gallus Gallus Domesticus) from 1st to 19th day-ectodermal structures.

    PubMed

    Toledo Fonseca, Erika; De Oliveira Silva, Fernanda Menezes; Alcântara, Dayane; Carvalho Cardoso, Rafael; Luís Franciolli, André; Sarmento, Carlos Alberto Palmeira; Fratini, Paula; José Piantino Ferreira, Antônio; Miglino, Maria Angélica

    2013-12-01

    Birds occupy a prominent place in the Brazilian economy not only in the poultry industry but also as an animal model in many areas of scientific research. Thus the aim of this study was to provide a description of macro and microscopic aspects of the ectoderm-derived structures in chicken embryos / fetuses poultry (Gallus gallus domesticus) from 1st to 19th day of incubation. 40 fertilized eggs, from a strain of domestic chickens, with an incubation period of 2-19 days were subjected to macroscopic description, biometrics, light, and scanning microscopy. All changes observed during the development were described. The nervous system, skin and appendages and organs related to vision and hearing began to be identified, both macro and microscopically, from the second day of incubation. The vesicles from the primitive central nervous system-forebrain, midbrain, and hindbrain-were identified on the third day of incubation. On the sixth day of incubation, there was a clear vascularization of the skin. The optic vesicle was first observed fourth day of development and on the fifth day there was the beginning of the lens formation. Although embryonic development is influenced by animal line as well as external factors such as incubation temperature, this paper provides a chronological description for chicken (Gallus gallus domesticus) during its embryonic development.

  20. Child gender and weight status moderate the relation of maternal feeding practices to body esteem in 1st grade children.

    PubMed

    Shriver, Lenka H; Hubbs-Tait, Laura; Harrist, Amanda W; Topham, Glade; Page, Melanie

    2015-06-01

    Prevention of body dissatisfaction development is critical for minimizing adverse effects of poor body esteem on eating behaviors, self-esteem, and overall health. Research has examined body esteem and its correlates largely in pre-adolescents and adolescents; however, important questions remain about factors influencing body esteem of younger children. The main purpose of this study was to test moderation by children's gender and weight status of the relation of maternal controlling feeding practices to 1st graders' body esteem. The Body Esteem Scale (BES) and anthropometric measurements were completed during one-on-one child interviews at school. Mothers completed the Child Feeding Questionnaire (restriction, monitoring, concern, self-assessed maternal weight). A total of 410 mother/child dyads (202 girls) participated. Percent of children classified as overweight (BMI-for-age ≥85th) was: girls - 29%; boys - 27%. Gender moderated the relation between restriction and body esteem (β = -.140, p = .05), with maternal restriction predicting body esteem in girls but not boys. The hypothesized three-way interaction among gender, child weight status, and monitoring was confirmed. Monitoring was significantly inversely related to body esteem only for overweight/obese girls (b = -1.630). The moderating influence of gender or gender and weight status on the link between maternal feeding practices and body esteem suggests the importance of body esteem interventions for girls as early as first grade. PMID:25624022

  1. Dynamics of the 1st order phase transition between the nuclear ordered phases of solid 3He

    NASA Astrophysics Data System (ADS)

    Tanaka, Takayoshi; Ito, Hideaki; Sasaki, Yutaka; Mizusaki, Takao

    2005-08-01

    Dynamics of the 1st order phase transition between the U2D2 and the high field phases (HFP) was studied by field-cycling method between these phases by using ultra low temperature magnetic resonance imaging (ULT-MRI). Single Crystal of U2D2 3He was produced at the bottom of compressional cell in superfluid 3He-B at about 0.5 mK. Domain distribution in the U2D2 crystal was examined by ULT-MRI. We have measured the NMR signal intensity to extract the time-evolution of the HFP, after the static magnetic field was swept quickly through the critical field BC1 and was stayed at B=BC1+ΔB. The volume concentration of the U2D2 decreased exponentially in time during the early stage of the phase transition. The rate constant depended positively on ΔB. After the phase transition to the HFP was completed, the static field decreased through BC1 and was fixed at B=BC1-ΔB. The observed rate constant was similar to the value in the opposite direction with identical ΔB. This exponential evolution and ΔB dependence of its rate suggest that the early stage of the phase transition is controlled by the nucleation process.

  2. Synthesis of nanomagnetic fluids and their UV spectrophotometric response with aliphatic organic acids and 1st tier dendrimers

    NASA Astrophysics Data System (ADS)

    Pandya, Shivani R.; Singh, Man

    2016-04-01

    Synthesis of Magnetic nanoparticles were made using coprecipitation method on mixing Fe+3 and Fe+2 in 2:1 ratio with aqueous 8M NaOH which on heating at 90°C for 2 h has yielded 85% magnetic (Fe3O4) nanoparticles (MNPs), characterized by XRD, VSM, SEM, and HR-TEM. The formic acid (FA), oxalic acid (OA) and citric acid (CA), the series of aliphatic organic acids along with Trimesoyl 1, 3, 5 tridimethyl malonate (TTDMM), trimesoyl 1, 3, 5 tridiethyl malonate (TTDEM), trimesoyl 1, 3, 5 tridipropyl malonate (TTDPM), trimesoyl 1, 3, 5 tridibutyl malonate (TTDBM) and trimesoyl 1, 3, 5 tridihexyl malonate (TTDHM) 1st tier dendrimers were used separately for preparing nanomagnetic fluid. From 25 to 150 µM MNPs at an interval of 25 µM were dispersed in 150 µM of acids and dendrimers separately with DMSO. UV-VIS spectrophotometry showed a maximum MNPs dispersion with TTDMM against others and found to be most stable nanomagnetic fluid on account of capping type mechanism of acids.

  3. Child gender and weight status moderate the relation of maternal feeding practices to body esteem in 1st grade children.

    PubMed

    Shriver, Lenka H; Hubbs-Tait, Laura; Harrist, Amanda W; Topham, Glade; Page, Melanie

    2015-06-01

    Prevention of body dissatisfaction development is critical for minimizing adverse effects of poor body esteem on eating behaviors, self-esteem, and overall health. Research has examined body esteem and its correlates largely in pre-adolescents and adolescents; however, important questions remain about factors influencing body esteem of younger children. The main purpose of this study was to test moderation by children's gender and weight status of the relation of maternal controlling feeding practices to 1st graders' body esteem. The Body Esteem Scale (BES) and anthropometric measurements were completed during one-on-one child interviews at school. Mothers completed the Child Feeding Questionnaire (restriction, monitoring, concern, self-assessed maternal weight). A total of 410 mother/child dyads (202 girls) participated. Percent of children classified as overweight (BMI-for-age ≥85th) was: girls - 29%; boys - 27%. Gender moderated the relation between restriction and body esteem (β = -.140, p = .05), with maternal restriction predicting body esteem in girls but not boys. The hypothesized three-way interaction among gender, child weight status, and monitoring was confirmed. Monitoring was significantly inversely related to body esteem only for overweight/obese girls (b = -1.630). The moderating influence of gender or gender and weight status on the link between maternal feeding practices and body esteem suggests the importance of body esteem interventions for girls as early as first grade.

  4. Case Study of Severe Lightning Activity Prior to and During the Outbreak of the June 1st Greenbelt Tornado

    NASA Astrophysics Data System (ADS)

    Barnum, B. H.; Badesha, S.; Shishineh, A.; Adams, N. H.

    2012-12-01

    Surges in lightning activity have been known to be associated with the outbreak of tornado activity. We present a case study of a tornado that touched down near Greenbelt Maryland during the evening of June 1st 2012. Preceding the tornado touchdown, two single point lightning detection systems, a Boltek LD-250 and Vaisala SA20, recorded very high lightning activity rates. An electric field mill (EFM) was also making measurements and recorded large, rapid amplitude oscillations in the vertical electric fields. These electric field oscillations quickly subsided after the initial tornado touchdown. The lightning activity also generated significant RF interference in the S-band dish antenna operated at the Applied Physics Laboratory. It was somewhat surprising that the lightning activity produced enough radiation at these frequencies to cause measured levels of interference which could potentially impair satellite communications. Our interpretation of the EFM data is that intensive vertical forcing and rotation in the thunderstorm during the tornado formation caused the observed rapid electric field oscillations. At the same time, the vertical mixing in the storm caused a surge in lightning activity rates recorded by the Boltek and Vaisala sensors. Following the tornado touchdown, there was a rapid decrease in the lightning rates from the sensors. The EFM oscillations also abruptly ceased and went to a more normal slow-varying pattern typically observed during other thunderstorms without associated tornado activity. It is suggested that a network of field mills could provide realtime warning of imminent tornado activity.

  5. PREFACE: 2nd Russia-Japan-USA Symposium on the Fundamental and Applied Problems of Terahertz Devices and Technologies (RJUS TeraTech - 2013)

    NASA Astrophysics Data System (ADS)

    Karasik, Valeriy; Ryzhii, Viktor; Yurchenko, Stanislav

    2014-03-01

    The 2nd Russia-Japan-USA Symposium 'The Fundamental & Applied Problems of Terahertz Devices & Technologies' (RJUS TeraTech - 2013) Bauman Moscow State Technical University Moscow, Russia, 3-6 June, 2013 The 2nd Russia-Japan-USA Symposium 'The Fundamental & Applied Problems of Terahertz Devices & Technologies' (RJUS TeraTech - 2013) was held in Bauman Moscow State Technical University on 3-6 June 2013 and was devoted to modern problems of terahertz optical technologies. RJUS TeraTech 2013 was organized by Bauman Moscow State Technical University in cooperation with Tohoku University (Sendai, Japan) and University of Buffalo (The State University of New York, USA). The Symposium was supported by Bauman Moscow State Technical University (Moscow, Russia) and Russian Foundation for Basic Research (grant number 13-08-06100-g). RJUS TeraTech - 2013 became a foundation for sharing and discussing modern and promising achievements in fundamental and applied problems of terahertz optical technologies, devices based on grapheme and grapheme strictures, condensed matter of different nature. Among participants of RJUS TeraTech - 2013, there were more than 100 researchers and students from different countries. This volume contains proceedings of the 2nd Russia-Japan-USA Symposium 'The Fundamental & Applied Problems of Terahertz Devices & Technologies'. Valeriy Karasik, Viktor Ryzhii and Stanislav Yurchenko Bauman Moscow State Technical University Symposium chair Anatoliy A Aleksandrov, Rector of BMSTU Symposium co-chair Valeriy E Karasik, Head of the Research and Educational Center 'PHOTONICS AND INFRARED TECHNOLOGY' (Russia) Invited Speakers Taiichi Otsuji, Research Institute of Electrical Communication, Tohoku University, Sendai, Japan Akira Satou, Research Institute of Electrical Communication, Tohoku University, Sendai, Japan Michael Shur, Electrical, Computer and System Engineering and Physics, Applied Physics, and Astronomy, Rensselaer Polytechnic Institute, NY, USA Natasha

  6. The Impact of Gender-Fair versus Gender-Stereotyped Basal Readers on 1st-Grade Children's Gender Stereotypes: A Natural Experiment

    ERIC Educational Resources Information Center

    Karniol, Rachel; Gal-Disegni, Michal

    2009-01-01

    Israeli 1st-grade children in two different schools in the same neighborhood who were using either a gender-stereotyped or a gender-fair basal reader were asked to judge for a series of female-stereotyped, male-stereotyped, and gender-neutral activities whether they were characteristic of females, of males, or of both. Children using the…

  7. Moving beyond the Lone Scientist: Helping 1st-Grade Students Appreciate the Social Context of Scientific Work Using Stories about Scientists

    ERIC Educational Resources Information Center

    Sharkawy, Azza

    2009-01-01

    While several studies have documented young children's (K-2) stereotypic views of scientists and scientific work, few have examined students' views of the social nature of scientific work and the strategies effective in broadening these views. The purpose of this study is to examine how stories about scientists influence 1st-grade students' views…

  8. Diagnostic Online Assessment of Basic IT Skills in 1st-Year Undergraduates in the Medical Sciences Division, University of Oxford

    ERIC Educational Resources Information Center

    Sieber, Vivien

    2009-01-01

    Attitude, experience and competence (broadly covered by the European Computer Driving Licence syllabus) in information technology (IT) were assessed in 846 1st-year Medical Sciences Division undergraduates (2003-06) at the start of their first term. Online assessments delivered during induction workshops were presented as an opportunity for…

  9. Space Ops 2002: Bringing Space Operations into the 21st Century. Track 3: Operations, Mission Planning and Control. 2nd Generation Reusable Launch Vehicle-Concepts for Flight Operations

    NASA Technical Reports Server (NTRS)

    Hagopian, Jeff

    2002-01-01

    With the successful implementation of the International Space Station (ISS), the National Aeronautics and Space Administration (NASA) enters a new era of opportunity for scientific research. The ISS provides a working laboratory in space, with tremendous capabilities for scientific research. Utilization of these capabilities requires a launch system capable of routinely transporting crew and logistics to/from the ISS, as well as supporting ISS assembly and maintenance tasks. The Space Shuttle serves as NASA's launch system for performing these functions. The Space Shuttle also serves as NASA's launch system for supporting other science and servicing missions that require a human presence in space. The Space Shuttle provides proof that reusable launch vehicles are technically and physically implementable. However, a couple of problems faced by NASA are the prohibitive cost of operating and maintaining the Space Shuttle and its relative inability to support high launch rates. The 2nd Generation Reusable Launch Vehicle (2nd Gen RLV) is NASA's solution to this problem. The 2nd Gen RLV will provide a robust launch system with increased safety, improved reliability and performance, and less cost. The improved performance and reduced costs of the 2nd Gen RLV will free up resources currently spent on launch services. These resource savings can then be applied to scientific research, which in turn can be supported by the higher launch rate capability of the 2nd Gen RLV. The result is a win - win situation for science and NASA. While meeting NASA's needs, the 2nd Gen RLV also provides the United States aerospace industry with a commercially viable launch capability. One of the keys to achieving the goals of the 2nd Gen RLV is to develop and implement new technologies and processes in the area of flight operations. NASA's experience in operating the Space Shuttle and the ISS has brought to light several areas where automation can be used to augment or eliminate functions

  10. A&M. TAN607 floor plans. Shows three floor levels of pool, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    A&M. TAN-607 floor plans. Shows three floor levels of pool, hot shop, and warm shop. Includes view of pool vestibule, personnel labyrinth, location of floor rails, and room numbers of office areas, labs, instrument rooms, and stairways. This drawing was re-drawn to show as-built features in 1993. Ralph M. Parsons 902-3-ANP-607-A 96. Date of original: December 1952. Approved by INEEL Classification Office for public release. INEEL index code no. 034-0607-00-693-106748 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

  11. What's new with the flu? Reflections regarding the management and prevention of influenza from the 2nd New Zealand Influenza Symposium, November 2015.

    PubMed

    Charania, Nadia A; Mansoor, Osman D; Murfitt, Diana; Turner, Nikki M

    2016-01-01

    Influenza is a common respiratory viral infection. Seasonal outbreaks of influenza cause substantial morbidity and mortality that burdens healthcare services every year. The influenza virus constantly evolves by antigenic drift and occasionally by antigenic shift, making this disease particularly challenging to manage and prevent. As influenza viruses cause seasonal outbreaks and also have the ability to cause pandemics leading to widespread social and economic losses, focused discussions on improving management and prevention efforts is warranted. The Immunisation Advisory Centre (IMAC) hosted the 2nd New Zealand Influenza Symposium (NZiS) in November 2015. International and national participants discussed current issues in influenza management and prevention. Experts in the field presented data from recent studies and discussed the ecology of influenza viruses, epidemiology of influenza, methods of prevention and minimisation, and experiences from the 2015 seasonal influenza immunisation campaign. The symposium concluded that although much progress in this field has been made, many areas for future research remain. PMID:27607085

  12. Phase Relations of the CaO-SiO2-Nd2O3 System and the Implication for Rare Earths Recycling

    NASA Astrophysics Data System (ADS)

    Le, Thu Hoai; Malfliet, Annelies; Blanpain, Bart; Guo, Muxing

    2016-06-01

    CaO-SiO2-Nd2O3 slags were equilibrated at 1773 K and 1873 K (1500 °C and 1600 °C) for 24 hours in Ar, and quenched in water to determine the operative phase relations. The composition and crystallinity of the phases in equilibrium were determined by EPMA-WDS and EBSD, respectively. Based on these analyses, the liquid stability region was accurately determined, and a large part of the isothermal section of the phase diagram was constructed. Data resulting from this work can be used to generate a thermodynamic database for rare-earth oxide-containing systems and to support further investigation on separation of rare earths from metallurgical slags or other residues through high-temperature processing.

  13. Sea Floor off San Diego, California

    USGS Publications Warehouse

    Dartnell, Peter; Gibbons, Helen

    2009-01-01

    Ocean-floor image generated from multibeam-bathymetry data acquired by the U.S. Geological Survey (USGS); Woods Hole Oceanographic Institution; Scripps Institution of Oceanography; California State University, Monterey Bay; and Fugro Pelagos. To learn more, visit http://pubs.usgs.gov/sim/2007/2959/.

  14. 36 CFR 1192.59 - Floor surfaces.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 36 Parks, Forests, and Public Property 3 2013-07-01 2012-07-01 true Floor surfaces. 1192.59 Section 1192.59 Parks, Forests, and Public Property ARCHITECTURAL AND TRANSPORTATION BARRIERS COMPLIANCE BOARD AMERICANS WITH DISABILITIES ACT (ADA) ACCESSIBILITY GUIDELINES FOR TRANSPORTATION VEHICLES Rapid Rail Vehicles and Systems § 1192.59...

  15. 36 CFR 1192.59 - Floor surfaces.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 36 Parks, Forests, and Public Property 3 2012-07-01 2012-07-01 false Floor surfaces. 1192.59 Section 1192.59 Parks, Forests, and Public Property ARCHITECTURAL AND TRANSPORTATION BARRIERS COMPLIANCE BOARD AMERICANS WITH DISABILITIES ACT (ADA) ACCESSIBILITY GUIDELINES FOR TRANSPORTATION VEHICLES Rapid Rail Vehicles and Systems § 1192.59...

  16. 36 CFR 1192.59 - Floor surfaces.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 36 Parks, Forests, and Public Property 3 2014-07-01 2014-07-01 false Floor surfaces. 1192.59 Section 1192.59 Parks, Forests, and Public Property ARCHITECTURAL AND TRANSPORTATION BARRIERS COMPLIANCE BOARD AMERICANS WITH DISABILITIES ACT (ADA) ACCESSIBILITY GUIDELINES FOR TRANSPORTATION VEHICLES Rapid Rail Vehicles and Systems § 1192.59...

  17. Lead exposures from varnished floor refinishing.

    PubMed

    Schirmer, Joseph; Havlena, Jeff; Jacobs, David E; Dixon, Sherry; Ikens, Robert

    2012-01-01

    We evaluated the presence of lead in varnish and factors predicting lead exposure from floor refinishing and inexpensive dust suppression control methods. Lead in varnish, settled dust, and air were measured using XRF, laboratory analysis of scrape and wipe samples, and National Institute for Occupational Safety and Health (NIOSH) Method 7300, respectively, during refinishing (n = 35 homes). Data were analyzed using step-wise logistic regression. Compared with federal standards, no lead in varnish samples exceeded 1.0 mg/cm(2), but 52% exceeded 5000 ppm and 70% of settled dust samples after refinishing exceeded 40 μg/ft(2). Refinishing pre-1930 dwellings or stairs predicted high lead dust on floors. Laboratory analysis of lead in varnish was significantly correlated with airborne lead (r = 0.23, p = 0.014). Adding dust collection bags into drum sanders and HEPA vacuums to edgers and buffers reduced mean floor lead dust by 8293 μg Pb/ft(2) (p<0.05) on floors and reduced most airborne lead exposures to less than 50 μg/m(3). Refinishing varnished surfaces in older housing produces high but controllable lead exposures. PMID:22494405

  18. Seeing Results in Flooring for Schools

    ERIC Educational Resources Information Center

    Simmons, Brian

    2011-01-01

    Operations staffs at education facilities of all sizes are tasked with selecting a hard floor cleaning program that is cost-effective, efficient and highly productive. With an increased focus on the sustainability of an environment, facility managers also must select a program that meets sustainability goals while maintaining a healthful, safe…

  19. Building Trades. Block III. Floor Framing.

    ERIC Educational Resources Information Center

    Texas A and M Univ., College Station. Vocational Instructional Services.

    This document contains three units of a course on floor framing to be used as part of a building trades program. Each unit consists, first, of an informational lesson, with complete lesson plan for the teacher's use. Included in each lesson plan are the lesson aim; lists of teaching aids, materials, references, and prerequisites for students;…

  20. Concentric Crater Floor Deposits in Daedalia Planum

    NASA Technical Reports Server (NTRS)

    2003-01-01

    [figure removed for brevity, see original site]

    Released 3 September 2003

    Concentric crater floor deposits in Daedalia Planum. Lava flows appear to be converging on this crater from the northeast as well as on the crater floor. The concentric floor deposits may be the result of exposed and eroded layers of sediment that make up the crater floor.

    Image information: VIS instrument. Latitude -22.3, Longitude 221.5 East (138.5 West). 19 meter/pixel resolution.

    Note: this THEMIS visual image has not been radiometrically nor geometrically calibrated for this preliminary release. An empirical correction has been performed to remove instrumental effects. A linear shift has been applied in the cross-track and down-track direction to approximate spacecraft and planetary motion. Fully calibrated and geometrically projected images will be released through the Planetary Data System in accordance with Project policies at a later time.

    NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The Thermal Emission Imaging System (THEMIS) was developed by Arizona State University, Tempe, in collaboration with Raytheon Santa Barbara Remote Sensing. The THEMIS investigation is led by Dr. Philip Christensen at Arizona State University. Lockheed Martin Astronautics, Denver, is the prime contractor for the Odyssey project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena.

  1. Performance Support on the Shop Floor.

    ERIC Educational Resources Information Center

    Kasvi, Jyrki J. J.; Vartiainen, Matti

    2000-01-01

    Discussion of performance support on the shop floor highlights four support systems for assembly lines that incorporate personal computer workstations in local area networks and use multimedia documents. Considers new customer-focused production paradigms; organizational learning; knowledge development; and electronic performance support systems…

  2. Nontraumatic orbital floor fracture after nose blowing.

    PubMed

    Sandhu, Ranjit S; Shah, Akash D

    2016-03-01

    A 40-year-old woman with no history of trauma or prior surgery presented to the emergency department with headache and left eye pain after nose blowing. Noncontrast maxillofacial computed tomography examination revealed an orbital floor fracture that ultimately required surgical repair. There are nontraumatic causes of orbital blowout fractures, and imaging should be obtained irrespective of trauma history. PMID:26973725

  3. Establishment of the 1st World Health Organization international standards for human papillomavirus type 16 DNA and type 18 DNA.

    PubMed

    Wilkinson, Dianna E; Baylis, Sally A; Padley, David; Heath, Alan B; Ferguson, Morag; Pagliusi, Sonia R; Quint, Wim G; Wheeler, Cosette M

    2010-06-15

    A World Health Organization collaborative study was conducted to evaluate candidate international standards for human papillomavirus (HPV) Type 16 DNA (NIBSC code 06/202) and HPV Type 18 DNA (NIBSC code 06/206) for use in the amplification and detection steps of nucleic acid-based assays. The freeze-dried candidate international standards were prepared from bulk preparations of cloned plasmid containing full-length HPV-16 or HPV-18 genomic DNA. Nineteen laboratories from 13 countries participated in the study using a variety of commercial and in-house quantitative and qualitative assays. The data presented here indicate that, upon freeze-drying, there is no significant loss in potency for the candidate HPV-18 DNA and a slight loss in potency for the candidate HPV-16 DNA; although this is likely not scientifically relevant when assay precision is considered. In general, the individual laboratory mean estimates for each study sample were grouped +/- approximately 2 log(10) around the theoretical HPV DNA concentration of the reconstituted ampoule (1 x 10(7) HPV genome equivalents/mL). The agreement between laboratories is improved when potencies are made relative to the candidate international standards, demonstrating their utility in harmonizing amplification and detection steps of HPV-16 and -18 DNA assays. Degradation studies indicate that the candidate international standards are extremely stable and suitable for long-term use. Based on these findings, the candidate standards were established as the 1st WHO international standards for HPV-16 DNA and HPV-18 DNA, each with a potency of 5 x 10(6) international units (IU) per ampoule or 1 x 10(7) IU mL(-1) when reconstituted as directed.

  4. Cognitive-based approach in teaching 1st year Physics for Life Sciences, including Atmospheric Physics and Climate Change components

    NASA Astrophysics Data System (ADS)

    Petelina, S. V.

    2009-12-01

    Most 1st year students who take the service course in Physics - Physics for Life Sciences - in Australia encounter numerous problems caused by such factors as no previous experience with this subject; general perception that Physics is hard and only very gifted people are able to understand it; lack of knowledge of elementary mathematics; difficulties encountered by lecturers in teaching university level Physics to a class of nearly 200 students with no prior experience, diverse and sometime disadvantageous backgrounds, different majoring areas, and different learning abilities. As a result, many students either drop, or fail the subject. In addition, many of those who pass develop a huge dislike towards Physics, consider the whole experience as time wasted, and spread this opinion among their peers and friends. The above issues were addressed by introducing numerous changes to the curriculum and modifying strategies and approaches in teaching Physics for Life Sciences. Instead of a conventional approach - teaching Physics from simple to complicated, topic after topic, the students were placed in the world of Physics in the same way as a newborn child is introduced to this world - everything is seen all the time and everywhere. That created a unique environment where a bigger picture and all details were always present and interrelated. Numerous concepts of classical and modern physics were discussed, compared, and interconnected all the time with “Light” being a key component. Our primary field of research is Atmospheric Physics, in particular studying the atmospheric composition and structure using various satellite and ground-based data. With this expertise and also inspired by an increasing importance of training a scientifically educated generation who understands the challenges of the modern society and responsibilities that come with wealth, a new section on environmental physics has been developed. It included atmospheric processes and the greenhouse

  5. FLOOR PLAN OF MAIN PROCESSING BUILDING (CPP601), SECOND FLOOR SHOWING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    FLOOR PLAN OF MAIN PROCESSING BUILDING (CPP-601), SECOND FLOOR SHOWING PROCESS MAKEUP AREA AND EIGHTEEN CELLS AND ADJOINING REMOTE ANALYTICAL FACILITY (CPP-627) SHOWING COLD LAB, DECONTAMINATION ROOM, MULTICURIE CELL ROOM, AND OFFICES. TO LEFT ARE LABORATORY BUILDING (CPP-602) AND MAINTENANCE BUILDING (CPP-630). INL DRAWING NUMBER 200-0601-00-706-051980. ALTERNATE ID NUMBER CPP-E-1980. - Idaho National Engineering Laboratory, Idaho Chemical Processing Plant, Fuel Reprocessing Complex, Scoville, Butte County, ID

  6. FLOOR PLAN OF MAIN PROCESSING BUILDING (CPP601), FIRST FLOOR SHOWING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    FLOOR PLAN OF MAIN PROCESSING BUILDING (CPP-601), FIRST FLOOR SHOWING SAMPLE CORRIDORS AND EIGHTEEN CELLS AND ADJOINING REMOTE ANALYTICAL FACILITY (CPP-627) SHOWING REMOTE ANALYTICAL FACILITIES LAB, DECONTAMINATION ROOM, AND MULTICURIE CELL ROOM. TO LEFT ARE LABORATORY BUILDING (CPP-602) AND MAINTENANCE BUILDING (CPP-630). INL DRAWING NUMBER 200-0601-00-706-051979. ALTERNATE ID NUMBER CPP-E-1979. - Idaho National Engineering Laboratory, Idaho Chemical Processing Plant, Fuel Reprocessing Complex, Scoville, Butte County, ID

  7. Studies of Nondefective Adenovirus 2-Simian Virus 40 Hybrid Viruses IV. Characterization of the Simian Virus 40 Ribonucleic Acid Species Induced by Wild-Type Simian Virus 40 and by the Nondefective Hybrid Virus, Ad2+ND1

    PubMed Central

    Oxman, Michael N.; Levine, Arthur S.; Crumpacker, Clyde S.; Levin, Myron J.; Henry, Patrick H.; Lewis, Andrew M.

    1971-01-01

    Ad2+ND1, a nondefective adenovirus 2 (Ad2)-simian virus 40 (SV40) hybrid virus, has been previously shown to contain a small segment of the SV40 genome covalently linked to Ad2 deoxyribonucleic acid (DNA). The SV40 portion of this hybrid virus has been characterized by relating the SV40-specific ribonucleic acid (RNA) sequences transcribed from the Ad2+ND1 DNA to those transcribed from the DNA of SV40 itself. RNA-DNA hybridization-competition studies indicate that the SV40 component of Ad2+ND1 consists of some, but not all, of that part of the SV40 genome which is transcribed early, i.e., prior to viral DNA replication, in SV40 lytic infection. PMID:4329969

  8. 27 CFR 46.233 - Payment of floor stocks tax.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... PRODUCTS AND CIGARETTE PAPERS AND TUBES Floor Stocks Tax on Certain Tobacco Products, Cigarette Papers, and Cigarette Tubes Held for Sale on April 1, 2009 Filing Requirements § 46.233 Payment of floor stocks tax....

  9. 27 CFR 46.231 - Floor stocks tax return.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... CIGARETTE PAPERS AND TUBES Floor Stocks Tax on Certain Tobacco Products, Cigarette Papers, and Cigarette....28T09, 2009 Floor Stocks Tax Return—Tobacco Products and Cigarette Papers and Tubes, is available...

  10. 27 CFR 46.231 - Floor stocks tax return.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... CIGARETTE PAPERS AND TUBES Floor Stocks Tax on Certain Tobacco Products, Cigarette Papers, and Cigarette....28T09, 2009 Floor Stocks Tax Return—Tobacco Products and Cigarette Papers and Tubes, is available...

  11. 27 CFR 46.233 - Payment of floor stocks tax.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... PRODUCTS AND CIGARETTE PAPERS AND TUBES Floor Stocks Tax on Certain Tobacco Products, Cigarette Papers, and Cigarette Tubes Held for Sale on April 1, 2009 Filing Requirements § 46.233 Payment of floor stocks tax....

  12. 27 CFR 46.231 - Floor stocks tax return.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... CIGARETTE PAPERS AND TUBES Floor Stocks Tax on Certain Tobacco Products, Cigarette Papers, and Cigarette....28T09, 2009 Floor Stocks Tax Return—Tobacco Products and Cigarette Papers and Tubes, is available...

  13. 27 CFR 46.233 - Payment of floor stocks tax.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... PRODUCTS AND CIGARETTE PAPERS AND TUBES Floor Stocks Tax on Certain Tobacco Products, Cigarette Papers, and Cigarette Tubes Held for Sale on April 1, 2009 Filing Requirements § 46.233 Payment of floor stocks tax....

  14. 27 CFR 46.231 - Floor stocks tax return.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... CIGARETTE PAPERS AND TUBES Floor Stocks Tax on Certain Tobacco Products, Cigarette Papers, and Cigarette....28T09, 2009 Floor Stocks Tax Return—Tobacco Products and Cigarette Papers and Tubes, is available...

  15. 27 CFR 46.233 - Payment of floor stocks tax.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... PRODUCTS AND CIGARETTE PAPERS AND TUBES Floor Stocks Tax on Certain Tobacco Products, Cigarette Papers, and Cigarette Tubes Held for Sale on April 1, 2009 Filing Requirements § 46.233 Payment of floor stocks tax....

  16. 27 CFR 46.231 - Floor stocks tax return.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... CIGARETTE PAPERS AND TUBES Floor Stocks Tax on Certain Tobacco Products, Cigarette Papers, and Cigarette....28T09, 2009 Floor Stocks Tax Return—Tobacco Products and Cigarette Papers and Tubes, is available...

  17. 5. EAST SECTION OF BUILDING, FIRST FLOOR, WEST ROOM. NOTE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. EAST SECTION OF BUILDING, FIRST FLOOR, WEST ROOM. NOTE OVEN AT LEFT. All construction original except wood flooring, plumbing and electricity. - Ralph Izard House, Kitchen Building, 110 Broad Street, Charleston, Charleston County, SC

  18. 12. TRIPLE WINDOW, FIRST FLOOR, SOUTH SIDE. Typical for all ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    12. TRIPLE WINDOW, FIRST FLOOR, SOUTH SIDE. Typical for all triple windows on first and second floors. Note single swing jib door - John Joyner Smith House, 400 Wilmington Street, Beaufort, Beaufort County, SC

  19. 11. BUILDING 1: FIRST FLOOR (Center Section), WEST AND NORTH ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    11. BUILDING 1: FIRST FLOOR (Center Section), WEST AND NORTH WALLS, SHOWING TWO TIERS OF COLUMNS WITH SECOND FLOOR REMOVED - Boston Beer Company, 225-249 West Second Street, South Boston, Suffolk County, MA

  20. Portable flooring protects finished surfaces, is easily moved

    NASA Technical Reports Server (NTRS)

    Carmody, R. J.

    1964-01-01

    To protect curved, finished surface and provide support for workmen, portable flooring has been made from rigid plastic foam blocks, faced with aluminum strips. Held together by nylon webbing, the flooring can be rolled up for easy carrying.

  1. 23. GRAINELEVATOR SECTION, FIRST FLOOR, INTERIOR, DETAIL OF FRAMING IN ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    23. GRAIN-ELEVATOR SECTION, FIRST FLOOR, INTERIOR, DETAIL OF FRAMING IN SOUTHWEST CORNER SUPPORTING GRAIN STORAGE CRIBS ON FLOORS ABOVE, LOOKING SOUTHWEST - Standard Mill, 116-118 Portland Avenue South, Minneapolis, Hennepin County, MN

  2. Refrigeration Plant, North Elevation, Second Floor Plan, East Elevation, Ground ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Refrigeration Plant, North Elevation, Second Floor Plan, East Elevation, Ground Floor Plan, Section A-A - Kennecott Copper Corporation, On Copper River & Northwestern Railroad, Kennicott, Valdez-Cordova Census Area, AK

  3. 15. View northeast, interior, second floor, central hallway (door to ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    15. View northeast, interior, second floor, central hallway (door to northwest bedroom at left, doorway to second floor porch at right in photograph) - Abraham Cyrus Farmstead, Farmhouse, 3271 Cyrus Road (County Road 1/6), Cyrus, Wayne County, WV

  4. 25. Interior view, second floor, showing numerous spouts and Simpson ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    25. Interior view, second floor, showing numerous spouts and Simpson Rotex sifter (Orville Simpson, Co; Cincinnati) on floor in middle-foreground. - Fisher-Fallgatter Mill, Waupaca, Waupaca County, WI

  5. 30. GENERAL TEST ROOM IN 1946 ADDITION, FOURTH FLOOR, LOOKING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    30. GENERAL TEST ROOM IN 1946 ADDITION, FOURTH FLOOR, LOOKING WEST. ORIGINALLY HAD SUSPENDED ACOUSTICAL CEILINGS WITH FLOURESCENT LIGHTING AND ASPHALT MASTIC TILE FLOORS - Underwriters' Laboratories, 207-231 East Ohio Street, Chicago, Cook County, IL

  6. CAR MACHINE SHOP, SECOND FLOOR, PAINT SPRAY ROOM EXTERIOR AND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    CAR MACHINE SHOP, SECOND FLOOR, PAINT SPRAY ROOM EXTERIOR AND ATTIC FLOOR SUPPORT COLUMNS AND BEAMS, LOOKING WEST. - Southern Pacific, Sacramento Shops, Car Machine Shop, 111 I Street, Sacramento, Sacramento County, CA

  7. INTERIOR VIEW OF THE SECOND FLOOR HALL. SHOWING THE IRON ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    INTERIOR VIEW OF THE SECOND FLOOR HALL. SHOWING THE IRON RAILING. NOTE THE TONGUE-AND-GROOVE WOOD FLOORING AND SINGLE PANEL DOORS. VIEW FACING SOUTH. - Hickam Field, Officers' Housing Type C, 208 Second Street, Honolulu, Honolulu County, HI

  8. INTERIOR VIEW OF THE SECOND FLOOR STAIR HALL. NOTE THE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    INTERIOR VIEW OF THE SECOND FLOOR STAIR HALL. NOTE THE TONGUE-AND-GROOVE WOOD FLOORING AND THE WINDOW ABOVE THE STAIR LANDING. VIEW FACING SOUTH. - Hickam Field, Officers' Housing Type D, 111 Beard Avenue, Honolulu, Honolulu County, HI

  9. 3. MILK BARN, INTERIOR VIEW OF GROUND FLOOR, LOOKING 132 ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3. MILK BARN, INTERIOR VIEW OF GROUND FLOOR, LOOKING 132 DEGREES SOUTHEAST, SHOWING RAISED FLOOR OF CENTRAL AISLE. - Hudson-Cippa-Wolf Ranch, Milk Barn, Sorento Road, Sacramento, Sacramento County, CA

  10. 50. Ground floor, looking northwest at former location of ground ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    50. Ground floor, looking northwest at former location of ground floor (bottom) level of milk room - Sheffield Farms Milk Plant, 1075 Webster Avenue (southwest corner of 166th Street), Bronx, Bronx County, NY

  11. 27. INTERIOR, FIRST FLOOR, SOUTH ENTRANCE, SOUTH LOBBY, DETAIL OF ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    27. INTERIOR, FIRST FLOOR, SOUTH ENTRANCE, SOUTH LOBBY, DETAIL OF BRONZE SEAL IN FLOOR (4' x 5' negative; 8' x 10' print) - U.S. Department of the Interior, Eighteenth & C Streets Northwest, Washington, District of Columbia, DC

  12. 3. FIRST FLOOR, FRONT SOUTHWEST CORNER ROOM WITH STAIRWAY TO ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3. FIRST FLOOR, FRONT SOUTHWEST CORNER ROOM WITH STAIRWAY TO SECOND FLOOR - Penn School Historic District, Benezet House, 1 mile South of Frogmore, Route 37, St Helena Island, Frogmore, Beaufort County, SC

  13. 33. Third floor, looking north, elevator and central stair to ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    33. Third floor, looking north, elevator and central stair to the right (original ice manufacturing floor) - Sheffield Farms Milk Plant, 1075 Webster Avenue (southwest corner of 166th Street), Bronx, Bronx County, NY

  14. 71. FIRST FLOOR, SENATE OFFICE HALLWAY IN 1902 ADDITION, LOOKING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    71. FIRST FLOOR, SENATE OFFICE HALLWAY IN 1902 ADDITION, LOOKING NORTHWEST, SHOWING ITALIAN MARBLE TILE FLOOR, PILASTERS, WAINSCOATING, DOOR SURROUND AND PLASTER CORNICE - Maryland State House, State Circle, Annapolis, Anne Arundel County, MD

  15. View of double floor boards with mortises cross beams, showing ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View of double floor boards with mortises cross beams, showing spikes and flooring nails (Lower board layer exposed) - Silas C. Read Sawmill, Outlet of Maxwell Lake near North Range Road, Fort Gordon, Richmond County, GA

  16. 8. DETAIL: GENERATOR FLOOR DIABLO POWERHOUSE SHOWING BUTTERFLY VALVE CONTROL, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    8. DETAIL: GENERATOR FLOOR DIABLO POWERHOUSE SHOWING BUTTERFLY VALVE CONTROL, MOSAIC TILE FLOOR, AS SEEN FROM VISITORS GALLERY, 1989. - Skagit Power Development, Diablo Powerhouse, On Skagit River, 6.1 miles upstream from Newhalem, Newhalem, Whatcom County, WA

  17. Interior view of groundfloor porch showing exposed concrete floor slab ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Interior view of ground-floor porch showing exposed concrete floor slab system, facing west. - Albrook Air Force Station, Field Officer's Quarters, West side of Dargue Avenue Circle, Balboa, Former Panama Canal Zone, CZ

  18. 8. DETAIL OF EAST FRONT, SHOWING FIRST FLOOR STOREFRONT AND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    8. DETAIL OF EAST FRONT, SHOWING FIRST FLOOR STOREFRONT AND SECOND FLOOR WINDOWS. VIEW TO WEST. - Commercial & Industrial Buildings, Dubuque Seed Company Warehouse, 169-171 Iowa Street, Dubuque, Dubuque County, IA

  19. 5. Light tower, stairs to second floor, looking northeast from ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. Light tower, stairs to second floor, looking northeast from first floor - Little River Light Station, East end of Little River Island, at mouth of Little River & entrance to Cutler Harbor, Cutler, Washington County, ME

  20. Detail of first floor of loading dock showing composition tile ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Detail of first floor of loading dock showing composition tile over wood floor/basement ceiling - Southern Pacific Railroad Depot, Railroad Terminal Post Office & Express Building, Fifth & I Streets, Sacramento, Sacramento County, CA

  1. 32. Coffee bean sluiceway on ground floor showing chute bringing ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    32. Coffee bean sluiceway on ground floor showing chute bringing beans from first floor hopper. HAER PR, 6-MAGU, 1B-17 - Hacienda Buena Vista, PR Route 10 (Ponce to Arecibo), Magueyes, Ponce Municipio, PR

  2. 20. View of second floor to the Cherry Hill lettuce ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    20. View of second floor to the Cherry Hill lettuce shed looking at floor area - Richmond Hill Plantation, Cherry Hill Lettuce Shed, East of Richmond Hill on Ford Neck Road, Richmond Hill, Bryan County, GA

  3. Formaldehyde and TVOC emission behavior of laminate flooring by structure of laminate flooring and heating condition.

    PubMed

    An, Jae-Yoon; Kim, Sumin; Kim, Hyun-Joong

    2011-03-15

    Formaldehyde was measured with a desiccator, a 20 L chamber and the FLEC method. The formaldehyde emission rate from laminate was the highest at 32 °C using the desiccator, which then decreased with time. The formaldehyde emission using the 20 L small chamber and FLEC showed a similar tendency. There was a strong correlation between the formaldehyde and total volatile organic compounds (TVOCs) with both types of floorings using the two different methods. The formaldehyde emission rate and TVOC results were higher when tested using the FLEC method than with the 20 L small chamber method. The emission rate was affected by the joint edge length in laminate flooring. Toluene, ethylbenzene and xylene were the main VOCs emitted from laminate flooring, and there were more unidentified VOCs emitted than identified VOCs. The samples heated with a floor heating system emitted more formaldehyde than those heated using an air circulation system due to the temperature difference between the bottom panel and flooring. The TVOC emission level of the samples was higher when an air circulation system was used than when a floor heating system was used due to the high ventilation rate.

  4. Four-wave-mixing and nonlinear cavity dumping of 280 picosecond 2nd Stokes pulse at 1.3 μm from Nd:SrMoO4 self-Raman laser

    NASA Astrophysics Data System (ADS)

    Smetanin, S. N.; Jelínek, M., Jr.; Kubeček, V.; Jelínková, H.; Ivleva, L. I.; Shurygin, A. S.

    2016-01-01

    The 280 picosecond 2nd Stokes Raman pulses at 1.3 μm were generated directly from the miniature diode-pumped Nd:SrMoO4 self-Raman laser. Using the 90° phase matching insensitive to the angular mismatch, the self-Raman laser allowed for the achievement of the four-wave-mixing generation of the 2nd Stokes Raman pulse directly in the active Nd:SrMoO4 crystal at stimulated Raman scattering (SRS) self-conversion of the laser radiation. The passive Cr:YAG Q-switching and nonlinear cavity dumping was used without any phase locking device.

  5. 13. INTERIOR VIEW, FIRST FLOOR SHOWING THE ELEVATORS FEEDING GRAIN ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    13. INTERIOR VIEW, FIRST FLOOR SHOWING THE ELEVATORS FEEDING GRAIN FROM THE SECOND FLOOR TO THE GRINDING STONES, WITH GRAIN ELEVATORS IN BACKGROUND (NOTE OUTLINE ON THE FLOOR WHERE ROLLER MILLS WERE ORIGINALLY PLACED) - Schech's Mill, Beaver Creek State Park, La Crescent, Houston County, MN

  6. 17. Same floor as hot water vats looking towards the ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    17. Same floor as hot water vats looking towards the front of the building. These have to do with grain from upper floor judging from ceiling to floor progression. Note nice iron work. - Tivoli-Union Brewery, 1320-1348 Tenth Street, Denver, Denver County, CO

  7. 48. GROUND FLOOR OF 1852 WING LOOKING WEST. NOTE THAT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    48. GROUND FLOOR OF 1852 WING LOOKING WEST. NOTE THAT THERE ARE FIVE ROWS OF COLUMNS ON THIS FLOOR. ROWS 1, 3, AND 5 ARE CAST IRON. ROWS 2 AND 4 ARE SOUTHERN PINE. FLOORS ABOVE HAVE ONLY 2 ROWS OF CAST IRON COLUMNS. - Boston Manufacturing Company, 144-190 Moody Street, Waltham, Middlesex County, MA

  8. What Do You Really Know About Floor Finishes & Strippers?

    ERIC Educational Resources Information Center

    Wirth, T. J.

    1972-01-01

    An independent testing laboratory reveals the results of comparative studies done on vinyl flooring and the question of to wax or not to wax'' and which waxes work best with what flooring; and provides six evaluation tips on floor strippers. (EA)

  9. 62. Photocopied August 1978. 'CARBIDE' OR SECOND FLOOR LOOKING EAST ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    62. Photocopied August 1978. 'CARBIDE' OR SECOND FLOOR LOOKING EAST FROM WEST END, OCTOBER 29, 1902. THE STAIRS TO THE POWER COMPANY'S SUPPLEMENTAL THIRD FLOOR APPEARS AT THE RIGHT; THE HOLLOW TILES WHICH FORMED THIS FLOOR AT THE TOP. (435) - Michigan Lake Superior Power Company, Portage Street, Sault Ste. Marie, Chippewa County, MI

  10. 36 CFR 1192.79 - Floors, steps and thresholds.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false Floors, steps and thresholds... Light Rail Vehicles and Systems § 1192.79 Floors, steps and thresholds. (a) Floor surfaces on aisles, step treads, places for standees, and areas where wheelchair and mobility aid users are to...

  11. 36 CFR 1192.117 - Floors, steps and thresholds.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false Floors, steps and thresholds... Intercity Rail Cars and Systems § 1192.117 Floors, steps and thresholds. (a) Floor surfaces on aisles, step.... (b) All step edges and thresholds shall have a band of color(s) running the full width of the step...

  12. 36 CFR 1192.99 - Floors, steps and thresholds.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false Floors, steps and thresholds... Commuter Rail Cars and Systems § 1192.99 Floors, steps and thresholds. (a) Floor surfaces on aisles, step... shall be slip-resistant. (b) All thresholds and step edges shall have a band of color(s) running...

  13. 49 CFR 38.117 - Floors, steps and thresholds.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 1 2011-10-01 2011-10-01 false Floors, steps and thresholds. 38.117 Section 38...) ACCESSIBILITY SPECIFICATIONS FOR TRANSPORTATION VEHICLES Intercity Rail Cars and Systems § 38.117 Floors, steps and thresholds. (a) Floor surfaces on aisles, step treads and areas where wheelchair and mobility...

  14. 49 CFR 38.99 - Floors, steps and thresholds.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 1 2010-10-01 2010-10-01 false Floors, steps and thresholds. 38.99 Section 38.99... SPECIFICATIONS FOR TRANSPORTATION VEHICLES Commuter Rail Cars and Systems § 38.99 Floors, steps and thresholds. (a) Floor surfaces on aisles, step treads, places for standees, and areas where wheelchair...

  15. 49 CFR 38.79 - Floors, steps and thresholds.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 1 2010-10-01 2010-10-01 false Floors, steps and thresholds. 38.79 Section 38.79... SPECIFICATIONS FOR TRANSPORTATION VEHICLES Light Rail Vehicles and Systems § 38.79 Floors, steps and thresholds. (a) Floor surfaces on aisles, step treads, places for standees, and areas where wheelchair...

  16. 36 CFR 1192.79 - Floors, steps and thresholds.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 36 Parks, Forests, and Public Property 3 2011-07-01 2011-07-01 false Floors, steps and thresholds... Light Rail Vehicles and Systems § 1192.79 Floors, steps and thresholds. (a) Floor surfaces on aisles, step treads, places for standees, and areas where wheelchair and mobility aid users are to...

  17. 49 CFR 38.79 - Floors, steps and thresholds.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 1 2011-10-01 2011-10-01 false Floors, steps and thresholds. 38.79 Section 38.79... SPECIFICATIONS FOR TRANSPORTATION VEHICLES Light Rail Vehicles and Systems § 38.79 Floors, steps and thresholds. (a) Floor surfaces on aisles, step treads, places for standees, and areas where wheelchair...

  18. 36 CFR 1192.99 - Floors, steps and thresholds.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 36 Parks, Forests, and Public Property 3 2011-07-01 2011-07-01 false Floors, steps and thresholds... Commuter Rail Cars and Systems § 1192.99 Floors, steps and thresholds. (a) Floor surfaces on aisles, step... shall be slip-resistant. (b) All thresholds and step edges shall have a band of color(s) running...

  19. 49 CFR 38.117 - Floors, steps and thresholds.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 1 2010-10-01 2010-10-01 false Floors, steps and thresholds. 38.117 Section 38...) ACCESSIBILITY SPECIFICATIONS FOR TRANSPORTATION VEHICLES Intercity Rail Cars and Systems § 38.117 Floors, steps and thresholds. (a) Floor surfaces on aisles, step treads and areas where wheelchair and mobility...

  20. 36 CFR 1192.117 - Floors, steps and thresholds.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 36 Parks, Forests, and Public Property 3 2011-07-01 2011-07-01 false Floors, steps and thresholds... Intercity Rail Cars and Systems § 1192.117 Floors, steps and thresholds. (a) Floor surfaces on aisles, step.... (b) All step edges and thresholds shall have a band of color(s) running the full width of the step...