Science.gov

Sample records for 2nd floor emergency

  1. 2ND FLOOR HALLWAY LOOKING EAST, NOTE PRESSED TIN CEILING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    2ND FLOOR HALLWAY LOOKING EAST, NOTE PRESSED TIN CEILING - New York State Soldiers & Sailors Home, Building No. 29, Department of Veterans Affairs Medical Center, 76 Veterans Avenue, Bath, Steuben County, NY

  2. 37. MILL NO. 2, 2nd FLOOR, CLOSE SHOT OF 2 ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    37. MILL NO. 2, 2nd FLOOR, CLOSE SHOT OF 2 CREEL MACHINES, WHICH FEED YARN INTO KNITTING MACHINES. - Prattville Manufacturing Company, Number One, 242 South Court Street, Prattville, Autauga County, AL

  3. 42. OVERALL OF 2nd FLOOR PICKER ROOM OFF MILL NO. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    42. OVERALL OF 2nd FLOOR PICKER ROOM OFF MILL NO. 2. NOTE TRUSSWORK. SPACE TO RIGHT OF COLUMNS IS PART OF 1915 CLOTH ROOM ADDITION. - Prattville Manufacturing Company, Number One, 242 South Court Street, Prattville, Autauga County, AL

  4. 22. MILL NO. 1, 2nd FLOOR, LIGHT TABLES AND KNITTING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    22. MILL NO. 1, 2nd FLOOR, LIGHT TABLES AND KNITTING MACHINE. LIGHT TABLE USED TO CHECK FOR CLOTH DEFECTS. - Prattville Manufacturing Company, Number One, 242 South Court Street, Prattville, Autauga County, AL

  5. 27. INTERIOR, ADMINISTRATION BUILDING, 2ND FLOOR, SOUTHEAST CORNER SPACE, LOOKING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    27. INTERIOR, ADMINISTRATION BUILDING, 2ND FLOOR, SOUTHEAST CORNER SPACE, LOOKING UP AT CIRCULAR MOTIF AND BANDS IN THE CEILING ABOVE THE ACOUSTICAL TILES - Ford Motor Company Plant, 700 South Union Street, Alexandria, Independent City, VA

  6. 2nd Generation ELT Performance Specification Development

    NASA Technical Reports Server (NTRS)

    Stimson, Chad M.

    2015-01-01

    NASA Search And Rescue is supporting RTCA SC-229 with research and recommendations for performance specifications for the 2nd generation of emergency locator transmitters. Areas for improvement and methods for collecting data will be presented.

  7. Did the emergence of animals have an impact on the carbon cycle of the ocean floor?

    NASA Astrophysics Data System (ADS)

    Meysman, Filip; Maire, Olivier; Bockelmann, Frank; van Oevelen, Dick; Glud, Ronnie

    2010-05-01

    The first animals appeared at or near the ocean floor, and paleontologists have suggested that the ensuing Cambrian explosion resulted in a regime shift in the biogeochemical functioning of the ocean floor. The newly evolved animals rapidly adopted a burrowing lifestyle, and as result, sediments became mixed and reworked, thus "bulldozing" the microbial mats that had covered the ocean floor in the Precambrian. Sedimentary redox conditions also changed, as burrow networks were flushed with oxygenated overlying water. But did the emergence of large burrowing fauna truly have an impact on the carbon cycle of the ocean? Here, we try to answer this question by looking at the present-day situation, that is, we estimate how large the impact is of large burrowing fauna on organic carbon processing in the ocean floor. We addressed this by a global synthesis and model analysis of the in situ oxygen uptake rate in marine sediments, where the oxygen uptake is used as a proxy for organic carbon mineralization. The total oxygen uptake can be split into a diffusive oxygen uptake, linked to oxygen supply by diffusion across the sediment water interface, and a faunal mediated uptake, linked to faunal respiration and bio-irrigation. Our results show that the faunal mediated contribution to the total oxygen uptake is about 20% for the global ocean floor and 45% for the global continental shelves. About 25% of this faunal mediated contribution is explained by direct respiration of macrofauna and meiofauna, the other 75% is linked to the stimulation of microbial decomposition through bio-irrigation. Overall, our analysis suggests a large imprint of benthic fauna on the sedimentary processing of organic carbon, particularly in continental shelves and coastal sediments. This then suggests that the evolution of large burrowing fauna may have had a substantial impact on the rate of mineralization and sequestration of organic matter in marine sediments.

  8. PIRLS 2016 Assessment Framework. 2nd Edition

    ERIC Educational Resources Information Center

    Mullis, Ina V. S., Ed.; Martin, Michael O., Ed.

    2015-01-01

    The "PIRLS 2016 Assessment Framework, 2nd Edition" provides the foundation for the three international assessments planned as part of the International Association for the Evaluation of Educational Achievement's Progress in International Reading Literacy Study (PIRLS) 2016: PIRLS, PIRLS Literacy, and ePIRLS. PIRLS represents the…

  9. 76 FR 8778 - Construction Standards on Posting Emergency Telephone Numbers and Floor Load Limits; Extension of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-02-15

    ... Floor Load Limits; Extension of the Office of Management and Budget's (OMB) Approval of Information... extend OMB approval of the information collection requirements specified by the Construction Standards on... for the Information Collection Request (ICR) (OSHA-2011- 0032). All comments, including any...

  10. Medical museum, 2nd surgical hospital.

    PubMed

    Hawk, Alan J

    2013-12-01

    When his unit, the 2nd Surgical Hospital (MA), was established at An Khe in January 1966, MAJ Rich began collecting retrieved foreign bodies along with documentation of the wound. A museum displaying these objects was established at one end of the operating room Quonset hut. During Rich's tour of duty, there were 324 cases where the patient was wounded by a punji stick, representing 38% wounds because of hostile action.

  11. 2nd & 3rd Generation Vehicle Subsystems

    NASA Technical Reports Server (NTRS)

    2000-01-01

    This paper contains viewgraph presentation on the "2nd & 3rd Generation Vehicle Subsystems" project. The objective behind this project is to design, develop and test advanced avionics, power systems, power control and distribution components and subsystems for insertion into a highly reliable and low-cost system for a Reusable Launch Vehicles (RLV). The project is divided into two sections: 3rd Generation Vehicle Subsystems and 2nd Generation Vehicle Subsystems. The following topics are discussed under the first section, 3rd Generation Vehicle Subsystems: supporting the NASA RLV program; high-performance guidance & control adaptation for future RLVs; Evolvable Hardware (EHW) for 3rd generation avionics description; Scaleable, Fault-tolerant Intelligent Network or X(trans)ducers (SFINIX); advance electric actuation devices and subsystem technology; hybrid power sources and regeneration technology for electric actuators; and intelligent internal thermal control. Topics discussed in the 2nd Generation Vehicle Subsystems program include: design, development and test of a robust, low-maintenance avionics with no active cooling requirements and autonomous rendezvous and docking systems; design and development of a low maintenance, high reliability, intelligent power systems (fuel cells and battery); and design of a low cost, low maintenance high horsepower actuation systems (actuators).

  12. 2nd International Planetary Probe Workshop

    NASA Technical Reports Server (NTRS)

    Venkatapathy, Ethiraj; Martinez, Ed; Arcadi, Marla

    2005-01-01

    Included are presentations from the 2nd International Planetary Probe Workshop. The purpose of the second workshop was to continue to unite the community of planetary scientists, spacecraft engineers and mission designers and planners; whose expertise, experience and interests are in the areas of entry probe trajectory and attitude determination, and the aerodynamics/aerothermodynamics of planetary entry vehicles. Mars lander missions and the first probe mission to Titan made 2004 an exciting year for planetary exploration. The Workshop addressed entry probe science, engineering challenges, mission design and instruments, along with the challenges of reconstruction of the entry, descent and landing or the aerocapture phases. Topics addressed included methods, technologies, and algorithms currently employed; techniques and results from the rich history of entry probe science such as PAET, Venera/Vega, Pioneer Venus, Viking, Galileo, Mars Pathfinder and Mars MER; upcoming missions such as the imminent entry of Huygens and future Mars entry probes; and new and novel instrumentation and methodologies.

  13. 2nd Generation RLV Risk Definition Program

    NASA Technical Reports Server (NTRS)

    Davis, Robert M.; Stucker, Mark (Technical Monitor)

    2000-01-01

    The 2nd Generation RLV Risk Reduction Mid-Term Report summarizes the status of Kelly Space & Technology's activities during the first two and one half months of the program. This report was presented to the cognoscente Contracting Officer's Technical Representative (COTR) and selected Marshall Space Flight Center staff members on 26 September 2000. The report has been approved and is distributed on CD-ROM (as a PowerPoint file) in accordance with the terms of the subject contract, and contains information and data addressing the following: (1) Launch services demand and requirements; (2) Architecture, alternatives, and requirements; (3) Costs, pricing, and business cases analysis; (4) Commercial financing requirements, plans, and strategy; (5) System engineering processes and derived requirements; and (6) RLV system trade studies and design analysis.

  14. 2nd Generation Reusable Launch Vehicle NASA Led Propulsion Tasks

    NASA Technical Reports Server (NTRS)

    Richards, Steve

    2000-01-01

    Design, development and test of a 2nd generation Reusable Launch Vehicle (RLV) is presented. This current paper discusses the following: 2nd Generation RLV Propulsion Project, Overview of NASA Led Tasks in Propulsion, Gen2 Turbo Machinery Technology Demonstrator, and Combustion Devices Test Bed, GRCop-84 Sheet For Combustion Chambers, Nozzles and Large Actively Cooled Structures

  15. [Microsurgical 2nd toe transfer for catastrophic hand reconstruction].

    PubMed

    Placer, A; Lozano, Ja

    2007-01-01

    The correct reconstruction of the catastrophic hand requires complex surgical techniques. The microsurgical transference of a toe is indicated when all other reconstructive options are shown to be useless for the reconstruction of the required clamp function. In this clinical note we set out the case of a 32 year old man, who came to our accident and emergency department after suffering a traffic accident. After exploration the diagnosis was that of catastrophic left hand, among other policontusions. Urgent surgery was carried out, saving the maximum possible viable structures. The immediate result of this surgery was a hand with 1st, 4th and 5th functional fingers. As the essential clamp function between the 1st and 4th or 5th fingers was not totally satisfactory, we decided to reconstruct the 3rd finger of his hand with his ipsilateral 2nd toe. All pertinent studies to determine vascularisation of the flap were carried out in planning the surgery, and the microsurgical transfer was then realized, which was successful. Today, after a suitable rehabilitation, the patient has recovered a satisfactory function of heavy and fine clamp in the operated hand. Toe to hand transfer is a good option for finger reconstruction and its function. Rehabilitation is the key to functional recovery.

  16. Safety Education in Driving. 2nd Revision.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    Intended for driving instruction students, this publication contains instructional materials for safety education. It contains six sections on facts and figures; defensive driving; safety devices; restraints; emergency situations; and other highway users. Each section consists of reading material followed by an activity or activities. A total of…

  17. Molecular motors and the 2nd law of thermodynamics

    NASA Astrophysics Data System (ADS)

    Wang, Zhisong

    2014-03-01

    Molecular motors from biology and nanotechnology often operate on chemical energy of fuel molecules in an isothermal environment, unlike macroscopic heat engines that draw energy from a heat flow between two temperatures. Nevertheless, isothermal molecular motors are still subject to the 2nd law of thermodynamics in a fundamental way: their directional motion must cost a finite amount of energy other than the environmental heat even though no work is done; otherwise the 2nd law would be violated. Hence the 2nd law requires a finite energy price for pure direction of molecular motors. But what is the lowest price of direction allowed by the 2nd law? And how does the 2nd law-decreed price of direction limit performance of molecular motors? In the talk, I shall present our theoretical study of the 2nd law-molecular motor link on basis of the accumulated biomotor phenomenology, and also introduce our experimental effort to develop biomimetic DNA bipedal nanomotors following the mechanistic guidelines out of the theoretical study. [Main contents of this talk are from references:] This work is partially supported by FRC grants R-144-000-259-112, R-144-000-290-112 and R-144-000-320-112.

  18. 16. 3RD FLOOR, J.M. LEHMANN CO. FIVEROLL TOILET SOAP MILL ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    16. 3RD FLOOR, J.M. LEHMANN CO. FIVE-ROLL TOILET SOAP MILL INSTALLED 1950, TO WEST; BUCKET CONVEYOR AT RIGHT MOVED WASTE FROM 2ND FLOOR SOAP PRESSES TO 5TH FLOOR RE-MANUFACTURE - Colgate & Company Jersey City Plant, Building No. B-14, 54-58 Grand Street, Jersey City, Hudson County, NJ

  19. [Health and environment: the 2nd public health revolution.].

    PubMed

    Cicolella, André

    2010-01-01

    As of the mid-19th century, most infectious disease epidemics have been fought and slowed down by taking action on the environment (water, housing, waste) and education. This constitutes the 1st public health revolution paradigm. As we face the current epidemic of chronic diseases and the failure of the dominant biomedical model to stop them, a 2nd public health revolution is needed. The vision for this 2nd public health revolution requires a new paradigm built upon an eco-systemic definition of health and the recognition of the legitimacy for citizen participation based on the precautionary principle.

  20. Tangential Floor in a Classroom Setting

    ERIC Educational Resources Information Center

    Marti, Leyla

    2012-01-01

    This article examines floor management in two classroom sessions: a task-oriented computer lesson and a literature lesson. Recordings made in the computer lesson show the organization of floor when a task is given to students. Temporary or "incipient" side floors (Jones and Thornborrow, 2004) emerge beside the main floor. In the literature lesson,…

  1. Test Review: The Profile of Mood States 2nd Edition

    ERIC Educational Resources Information Center

    Lin, Shuqiong; Hsiao, Yu-Yu; Wang, Miao

    2014-01-01

    The "Profile of Mood States 2nd Edition" (POMS 2) was published in 2012 by Multi-Health Systems (MHS) to assess transient feelings and mood among individuals aged 13 years and above. Evolving from the original POMS (McNair, Lorr, & Droppleman, 1971, 1992), the POMS 2 was designed for youth (13-17 years old) and adults (18 years old…

  2. Book Review: Bioassays with Arthropods: 2nd Edition

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The technical book "Bioassays with Arthropods: 2nd Edition" (2007. Jacqueline L. Robertson, Robert M. Russell, Haiganoush K, Preisler and N. E. Nevin, Eds. CRC Press, Boca Raton, FL, 224 pp.) was reviewed for the scientific readership of the peer-reviewed publication Journal of Economic Entomology. ...

  3. SrF2:Nd3+ laser fluoride ceramics.

    PubMed

    Basiev, T T; Doroshenko, M E; Konyushkin, V A; Osiko, V V

    2010-12-01

    SrF(2):Nd(3+) fluoride ceramics of high optical quality was prepared and its spectroscopic and laser properties investigated. Oscillations of different optical centers depending on the excitation wavelength were obtained with a slope efficiency of up to 19%.

  4. A Handbook for Classroom Instruction That Works, 2nd Edition

    ERIC Educational Resources Information Center

    Association for Supervision and Curriculum Development, 2012

    2012-01-01

    Perfect for self-help and professional learning communities, this handbook makes it much easier to apply the teaching practices from the ASCD-McREL best-seller "Classroom Instruction That Works: Research-Based Strategies for Increasing Student Achievement, 2nd Edition." The authors take you through the refined Instructional Planning Guide, so you…

  5. [Model and enlightenment from rescue of August 2nd Kunshan explosion casualty].

    PubMed

    Tan, Q; Qiu, H B; Sun, B W; Shen, Y M; Nie, L J; Zhang, H W

    2016-01-01

    On August 2nd, 2014, a massive dust explosion occurred in a factory of Kunshan, resulting in a mass casualty involving 185 burn patients. They were transported to 20 medical institutions in Jiangsu province and Shanghai. More than one thousand of medical personnel of our country participated in this emergency rescue, and satisfactory results were achieved. In this paper, the characteristics of this accident were analyzed, the positive effects of interdisciplinary cooperation were affirmed, and the contingency plan, rescue process and pattern, and reserve, organization and management of talents during this rescue process were reviewed retrospectively.

  6. Third Floor Plan, Second Floor Plan, First Floor Plan, Ground ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Third Floor Plan, Second Floor Plan, First Floor Plan, Ground Floor Plan, West Bunkhouse - Kennecott Copper Corporation, On Copper River & Northwestern Railroad, Kennicott, Valdez-Cordova Census Area, AK

  7. First and Second Floor Window Sills; First Floor, Second Floor, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    First and Second Floor Window Sills; First Floor, Second Floor, and Third Floor Door Jambs; Stair and Second Floor Baseboards; First Floor Window Jamb - National Home for Disabled Volunteer Soldiers - Battle Mountain Sanitarium, Treasurer's Quarters, 500 North Fifth Street, Hot Springs, Fall River County, SD

  8. Monolithic Microwave Integrated Circuit (MMIC) Frequency Doublers - 2nd Pass Correction

    DTIC Science & Technology

    2013-09-01

    Monolithic Microwave Integrated Circuit (MMIC) Frequency Doublers—2nd Pass Correction by John E. Penn ARL-TN-0580 September 2013...September 2013 Monolithic Microwave Integrated Circuit (MMIC) Frequency Doublers—2nd Pass Correction John E. Penn Sensors and Electron...COVERED (From - To) 4. TITLE AND SUBTITLE Monolithic Microwave Integrated Circuit (MMIC) Frequency Doublers–2nd Pass Correction 5a. CONTRACT NUMBER

  9. 2nd Generation RLV: Program Goals and Acquisition Strategy

    NASA Technical Reports Server (NTRS)

    Graham, J. Bart; Dumbacher, D. L. (Technical Monitor)

    2001-01-01

    The risk to loss of life for Space Shuttle crewmembers is approximately one in 245 missions. U.S. launch service providers captured nearly 100%, of the commercial launch market revenues in the mid 1980s. Today, the U.S. captures less than 50% of that market. A launch system architecture is needed that will dramatically increase the safety of space flight while significantly reducing the cost. NASA's Space Launch Initiative, which is implemented by the 2nd Generation RLV Program Office at Marshall Space Flight Center, seeks to develop technology and reusable launch vehicle concepts which satisfy the commercial launch market needs and the unique needs of NASA. Presented in this paper are the five primary elements of NASA's Integrated Space Transportation Plan along with the highest level goals and the acquisition strategy of the 2nd Generation RLV Program. Approval of the Space Launch Initiative FY01 budget of $290M is seen as a major commitment by the Agency and the Nation to realize the commercial potential that space offers and to move forward in the exploration of space.

  10. The 2nd generation VLTI path to performance

    NASA Astrophysics Data System (ADS)

    Woillez, Julien; Alonso, Jaime; Berger, Jean-Philippe; Bonnet, Henri; de Wit, Willem-Jan; Egner, Sebastian; Eisenhauer, Frank; Gonté, Frédéric; Guieu, Sylvain; Haguenauer, Pierre; Mérand, Antoine; Pettazzi, Lorenzo; Poupar, Sébastien; Schöller, Markus; Schuhler, Nicolas

    2016-08-01

    The upgrade of the VLTI infrastructure for the 2nd generation instruments is now complete with the transformation of the laboratory, and installation of star separators on both the 1.8-m Auxiliary Telescopes (ATs) and the 8-m Unit Telescopes (UTs). The Gravity fringe tracker has had a full semester of commissioning on the ATs, and a first look at the UTs. The CIAO infrared wavefront sensor is about to demonstrate its performance relative to the visible wavefront sensor MACAO. First astrometric measurements on the ATs and astrometric qualification of the UTs are on-going. Now is a good time to revisit the performance roadmap for VLTI that was initiated in 2014, which aimed at coherently driving the developments of the interferometer, and especially its performance, in support to the new generation of instruments: Gravity and MATISSE.

  11. Philips' 2nd generation Novallure LED candle lamp

    NASA Astrophysics Data System (ADS)

    Li, Yun; Pei, Zhigang; Yuan, Chuan; Jiang, Tan; Lu, Zhengsong; Wang, Yuqian; Duan, Xiaoqing; Xiong, Yan; Zhong, Hong; Liu, Ye

    2010-08-01

    Finding an energy efficient replacement of incandescent candle lamp has been a technical challenge. Compact fluorescent lamps, for example, can be miniaturized to fit the form factor of a candle lamp but they fail to reproduce its "sparkle" effect. Empowered by solid state lighting technology along with original optical design, Philips has successfully developed LED-powered candle lamps "Novallure" with great energy savings (2W power consumption with lumen output of 55 lumen) and the "butterfly" radiation pattern that mimics the sparkle effect from an incandescent candle lamp. With new high performance LED packages, novel under-cut prismatic optics and state-of-the-art electronic driver solution and thermal solution, we have developed a 2nd generation Novallure with breakthrough performance: a dimmable 2700K 136 lumen LED candle lamp with CRI 90.

  12. Refraction data survey: 2nd generation correlation of myopia.

    PubMed

    Greene, Peter R; Medina, Antonio

    2016-10-01

    The objective herein is to provide refraction data, myopia progression rate, prevalence, and 1st and 2nd generation correlations, relevant to whether myopia is random or inherited. First- and second-generation ocular refraction data are assembled from N = 34 families, average of 2.8 children per family. From this group, data are available from N = 165 subjects. Inter-generation regressions are performed on all the data sets, including correlation coefficient r, and myopia prevalence [%]. Prevalence of myopia is [M] = 38.5 %. Prevalence of high myopes with |R| >6 D is [M-] = 20.5 %. Average refraction is  = -1.84 D ± 3.22 (N = 165). For the high myopes, |R| >6 D, prevalence for the parents is [M-] = 25 %, for the 2nd generation [M-] = 16.5 %. Average myopia level for the high myopes, both generations, is  = -7.52 D ± 1.31 D (N = 33). Regression parameters are calculated for all the data sets, yielding correlation coefficients in the range r = 0.48-0.72 for some groups of myopes and high myopes, fathers to daughters, and mothers to sons. Also of interest, some categories show essentially no correlation, -0.20 < r < 0.20, indicating that the refractive errors occur randomly. Time series results show myopia diopter rates = -0.50 D/year.

  13. Super Boiler 2nd Generation Technology for Watertube Boilers

    SciTech Connect

    Mr. David Cygan; Dr. Joseph Rabovitser

    2012-03-31

    This report describes Phase I of a proposed two phase project to develop and demonstrate an advanced industrial watertube boiler system with the capability of reaching 94% (HHV) fuel-to-steam efficiency and emissions below 2 ppmv NOx, 2 ppmv CO, and 1 ppmv VOC on natural gas fuel. The boiler design would have the capability to produce >1500 F, >1500 psig superheated steam, burn multiple fuels, and will be 50% smaller/lighter than currently available watertube boilers of similar capacity. This project is built upon the successful Super Boiler project at GTI. In that project that employed a unique two-staged intercooled combustion system and an innovative heat recovery system to reduce NOx to below 5 ppmv and demonstrated fuel-to-steam efficiency of 94% (HHV). This project was carried out under the leadership of GTI with project partners Cleaver-Brooks, Inc., Nebraska Boiler, a Division of Cleaver-Brooks, and Media and Process Technology Inc., and project advisors Georgia Institute of Technology, Alstom Power Inc., Pacific Northwest National Laboratory and Oak Ridge National Laboratory. Phase I of efforts focused on developing 2nd generation boiler concepts and performance modeling; incorporating multi-fuel (natural gas and oil) capabilities; assessing heat recovery, heat transfer and steam superheating approaches; and developing the overall conceptual engineering boiler design. Based on our analysis, the 2nd generation Industrial Watertube Boiler when developed and commercialized, could potentially save 265 trillion Btu and $1.6 billion in fuel costs across U.S. industry through increased efficiency. Its ultra-clean combustion could eliminate 57,000 tons of NOx, 460,000 tons of CO, and 8.8 million tons of CO2 annually from the atmosphere. Reduction in boiler size will bring cost-effective package boilers into a size range previously dominated by more expensive field-erected boilers, benefiting manufacturers and end users through lower capital costs.

  14. CRC handbook of geophysical exploration at sea, 2nd edition

    SciTech Connect

    Geuer, R.A. )

    1990-01-01

    This book presents some of the most advanced research and operational information currently available about hard minerals and hydrocarbons. Information is provided in an integrated, interdisciplinary manner, stressing case histories and review chapters. Illustrations, graphs, tables, and color satellite images are used to graphically present the results of gravity, geodetic and seismic surveys, and 3-D sea floor sub-bottom visualizations. Data has been obtained from the Atlantic and Pacific Oceans, Gulf of Mexico, and Caribbean Sea using satellites, aircraft, and ships.

  15. Floors: Selection and Maintenance.

    ERIC Educational Resources Information Center

    Berkeley, Bernard

    Flooring for institutional, commercial, and industrial use is described with regard to its selection, care, and maintenance. The following flooring and subflooring material categories are discussed--(1) resilient floor coverings, (2) carpeting, (3) masonry floors, (4) wood floors, and (5) "formed-in-place floors". The properties, problems,…

  16. What's Up With Mercury's 2nd-Degree Shape?

    NASA Astrophysics Data System (ADS)

    Chen, E.; Phillips, R. J.; Zhong, S.

    2015-12-01

    The long-wavelength topography and geoid of a planet are basic observations fundamental to understanding the planet's thermal and dynamical history. Observations by the MESSENGER spacecraft have significantly reduced the uncertainty in the spherical harmonic 2nd-degree (l2) topography and gravity coefficients. Similar to those of the Moon, the long wavelength shape and geoid of Mercury are significantly out of hydrostatic equilibrium [Perry et al., 2015]. The diversion from equilibrium of the Moon has been attributed to orbital evolution and the "freezing-in" of a fossil bulge. With respect to Mercury, the disequilibrium of the l2 shape and geoid is unlikely to be due to its orbital history [Matsuyama and Nimmo, 2009]. Non-hydrostatic models can explain the gravity and shape of Mercury. Buoyancy from thermal anomalies isostatically supporting the surface falls short of reproducing the observed l2 admittance and topography. We explore three scenarios that can generate high admittances at degree-2: flexural/membrane loading on the surface, buoyant structures within the mantle, or topography on the core-mantle boundary. We discuss both isostatic and dynamic models of compensation, and include variations of viscosity structure and elastic properties. However, typical sources of these mechanisms (e.g. large volcanic provinces that collectively have symmetry about the equator or mantle convection with a strong l2 component) are not obviously present on Mercury.

  17. PREFACE: 2nd International Symposium "Optics and its Applications"

    NASA Astrophysics Data System (ADS)

    Calvo, Maria L.; Dolganova, Irina N.; Gevorgyan, Narine; Guzman, Angela; Papoyan, Aram; Sarkisyan, Hayk; Yurchenko, Stanislav

    2016-01-01

    The ICTP smr2633: 2nd International Symposium "Optics and its Applications" (OPTICS-2014) http://indico.ictp.it/event/a13253/ was held in Yerevan and Ashtarak, Armenia, on 1-5 September 2014. The Symposium was organized by the Abdus Salam International Center for Theoretical Physics (ICTP) with the collaboration of the SPIE Armenian Student Chapter, the Armenian TC of ICO, the Russian-Armenian University (RAU), the Institute for Physical Research of the National Academy of Sciences of Armenia (IPR of NAS), the Greek-Armenian industrial company LT-Pyrkal, and the Yerevan State University (YSU). The Symposium was co-organized by the BMSTU SPIE & OSA student chapters. The International Symposium OPTICS-2014 was dedicated to the 50th anniversary of the Abdus Salam International Center for Theoretical Physics. This symposium "Optics and its Applications" was the First Official ICTP Scientific Event in Armenia. The presentations at OPTICS-2014 were centered on these topics: optical properties of nanostructures; quantum optics & information; singular optics and its applications; laser spectroscopy; strong field optics; nonlinear & ultrafast optics; photonics & fiber optics; optics of liquid crystals; and mathematical methods in optics.

  18. Aging Studies of 2nd Generation BaBar RPCs

    SciTech Connect

    Band, H.R.; /SLAC

    2007-09-25

    The BaBar detector, operating at the PEPII B factory of the Stanford Linear Accelerator Center (SLAC), installed over 200 2nd generation Resistive Plate Chambers (RPCs) in 2002. The streamer rates produced by backgrounds and signals from normal BaBar running vary considerably (0.1- >20 Hz/cm2) depending on the layer and position of the chambers, thus providing a broad spectrum test of RPC performance and aging. The lowest rate chambers have performed very well with stable efficiencies averaging 95%. Other chambers had rate-dependant inefficiencies due to Bakelite drying which were reversed by the introduction of humidified gases. RPC inefficiencies in the highest rate regions of the higher rate chambers have been observed and also found to be rate dependant. The inefficient regions grow with time and have not yet been reduced by operation with humidified input gas. Three of these chambers were converted to avalanche mode operation and display significantly improved efficiencies. The rate of production of HF in the RPC exhaust gases was measured in avalanche and streamer mode RPCs and found to be comparable despite the lower current of the avalanche mode RPCs.

  19. THE 2nd SCHIZOPHRENIA INTERNATIONAL RESEARCH SOCIETY CONFERENCE, 10–14 APRIL 2010, FLORENCE, ITALY: SUMMARIES OF ORAL SESSIONS

    PubMed Central

    Baharnoori, Moogeh; Bartholomeusz, Cali; Boucher, Aurelie A.; Buchy, Lisa; Chaddock, Christopher; Chiliza, Bonga; Föcking, Melanie; Fornito, Alex; Gallego, Juan A.; Hori, Hiroaki; Huf, Gisele; Jabbar, Gul A.; Kang, Shi Hyun; El Kissi, Yousri; Merchán-Naranjo, Jessica; Modinos, Gemma; Abdel-Fadeel, Nashaat A.M.; Neubeck, Anna-Karin; Ng, Hsiao Piau; Novak, Gabriela; Owolabi, Olasunmbo.O.; Prata, Diana P.; Rao, Naren P.; Riecansky, Igor; Smith, Darryl C.; Souza, Renan P.; Thienel, Renate; Trotman, Hanan D.; Uchida, Hiroyuki; Woodberry, Kristen A.; O'Shea, Anne; DeLisi, Lynn E.

    2014-01-01

    The 2nd Schizophrenia International Research Society Conference, was held in Florence, Italy, April 10–15, 2010. Student travel awardees served as rapporteurs of each oral session and focused their summaries on the most significant findings that emerged from each session and the discussions that followed. The following report is a composite of these reviews. It is hoped that it will provide an overview for those who were present, but could not participate in all sessions, and those who did not have the opportunity to attend, but who would be interested in an update on current investigations ongoing in the field of schizophrenia research. PMID:20934307

  20. The 2nd Generation Real Time Mission Monitor (RTMM) Development

    NASA Technical Reports Server (NTRS)

    Blakeslee, Richard; Goodman, Michael; Meyer, Paul; Hardin, Danny; Hall, John; He, Yubin; Regner, Kathryn; Conover, Helen; Smith, Tammy; Lu, Jessica; Garrett, Michelle

    2009-01-01

    The NASA Real Time Mission Monitor (RTMM) is a visualization and information system that fuses multiple Earth science data sources, to enable real time decisionmaking for airborne and ground validation experiments. Developed at the National Aeronautics and Space Administration (NASA) Marshall Space Flight Center, RTMM is a situational awareness, decision-support system that integrates satellite imagery and orbit data, radar and other surface observations (e.g., lightning location network data), airborne navigation and instrument data sets, model output parameters, and other applicable Earth science data sets. The integration and delivery of this information is made possible using data acquisition systems, network communication links, network server resources, and visualizations through the Google Earth virtual globe application. In order to improve the usefulness and efficiency of the RTMM system, capabilities are being developed to allow the end-user to easily configure RTMM applications based on their mission-specific requirements and objectives. This second generation RTMM is being redesigned to take advantage of the Google plug-in capabilities to run multiple applications in a web browser rather than the original single application Google Earth approach. Currently RTMM employs a limited Service Oriented Architecture approach to enable discovery of mission specific resources. We are expanding the RTMM architecture such that it will more effectively utilize the Open Geospatial Consortium Sensor Web Enablement services and other new technology software tools and components. These modifications and extensions will result in a robust, versatile RTMM system that will greatly increase flexibility of the user to choose which science data sets and support applications to view and/or use. The improvements brought about by RTMM 2nd generation system will provide mission planners and airborne scientists with enhanced decision-making tools and capabilities to more

  1. PREFACE: 2nd National Conference on Nanotechnology 'NANO 2008'

    NASA Astrophysics Data System (ADS)

    Czuba, P.; Kolodziej, J. J.; Konior, J.; Szymonski, M.

    2009-03-01

    This issue of Journal of Physics: Conference Series contains selected papers presented at the 2nd National Conference on Nanotechnology 'NANO2008', that was held in Kraków, Poland, 25-28 June 2008. It was organized jointly by the Polish Chemical Society, Polish Physical Society, Polish Vacuum Society, and the Centre for Nanometer-scale Science and Advanced Materials (NANOSAM) of the Jagiellonian University. The meeting presentations were categorized into the following topics: 1. Nanomechanics and nanotribology 2. Characterization and manipulation in nanoscale 3. Quantum effects in nanostructures 4. Nanostructures on surfaces 5. Applications of nanotechnology in biology and medicine 6. Nanotechnology in education 7. Industrial applications of nanotechnology, presentations of the companies 8. Nanoengineering and nanomaterials (international sessions shared with the fellows of Maria-Curie Host Fellowships within the 6th FP of the European Community Project 'Nano-Engineering for Expertise and Development, NEED') 9. Nanopowders 10. Carbon nanostructures and nanosystems 11. Nanoelectronics and nanophotonics 12. Nanomaterials in catalysis 13. Nanospintronics 14. Ethical, social, and environmental aspects of nanotechnology The Conference was attended by 334 participants. The presentations were delivered as 7 invited plenary lectures, 25 invited topical lectures, 78 oral and 108 poster contributions. Only 1/6 of the contributions presented during the Conference were submitted for publication in this Proceedings volume. From the submitted material, this volume of Journal of Physics: Conference Series contains 37 articles that were positively evaluated by independent referees. The Organizing Committee gratefully acknowledges all these contributions. We also thank all the referees of the papers submitted for the Proceedings for their timely and thorough work. We would like to thank all members of the National Program Committee for their work in the selection process of

  2. Development of a Hydrologic Characterization Technology for Fault Zones Phase II 2nd Report

    SciTech Connect

    Karasaki, Kenzi; Doughty, Christine; Gasperikova, Erika; Peterson, John; Conrad, Mark; Cook, Paul; Tiemi, Onishi

    2011-03-31

    This is the 2nd report on the three-year program of the 2nd phase of the NUMO-LBNL collaborative project: Development of Hydrologic Characterization Technology for Fault Zones under NUMO-DOE/LBNL collaboration agreement. As such, this report is a compendium of the results by Kiho et al. (2011) and those by LBNL.

  3. Highlights of the 2 nd Bioinformatics Student Symposium by ISCB RSG-UK

    PubMed Central

    White, Benjamen; Fatima, Vayani; Fatima, Nazeefa; Das, Sayoni; Rahman, Farzana; Hassan, Mehedi

    2016-01-01

    Following the success of the 1 st Student Symposium by ISCB RSG-UK, a 2 nd Student Symposium took place on 7 th October 2015 at The Genome Analysis Centre, Norwich, UK. This short report summarizes the main highlights from the 2 nd Bioinformatics Student Symposium. PMID:27239284

  4. The 2nd Generation Real Time Mission Monitor (RTMM) Development

    NASA Astrophysics Data System (ADS)

    Blakeslee, R. J.; Goodman, M.; Hardin, D. M.; Hall, J.; Yubin He, M.; Regner, K.; Conover, H.; Smith, T.; Meyer, P.; Lu, J.; Garrett, M.

    2009-12-01

    The NASA Real Time Mission Monitor (RTMM) is a visualization and information system that fuses multiple Earth science data sources, to enable real time decision-making for airborne and ground validation experiments. Developed at the National Aeronautics and Space Administration (NASA) Marshall Space Flight Center, RTMM is a situational awareness, decision-support system that integrates satellite imagery and orbit data, radar and other surface observations (e.g., lightning location network data), airborne navigation and instrument data sets, model output parameters, and other applicable Earth science data sets. The integration and delivery of this information is made possible using data acquisition systems, network communication links, network server resources, and visualizations through the Google Earth virtual globe application. In order to improve the usefulness and efficiency of the RTMM system, capabilities are being developed to allow the end-user to easily configure RTMM applications based on their mission-specific requirements and objectives. This second generation RTMM is being redesigned to take advantage of the Google plug-in capabilities to run multiple applications in a web browser rather than the original single application Google Earth approach. Currently RTMM employs a limited Service Oriented Architecture approach to enable discovery of mission specific resources. We are expanding the RTMM architecture such that it will more effectively utilize the Open Geospatial Consortium Sensor Web Enablement services and other new technology software tools and components. These modifications and extensions will result in a robust, versatile RTMM system that will greatly increase flexibility of the user to choose which science data sets and support applications to view and/or use. The improvements brought about by RTMM 2nd generation system will provide mission planners and airborne scientists with enhanced decision-making tools and capabilities to more

  5. 2nd interface between ecology and land development in California

    USGS Publications Warehouse

    Keeley, Jon E.; Baer-Keeley, Melanie; Fortheringham, C.J.

    2000-01-01

    The 2nd Interface Between Ecology and Land Development Conference was held in association with Earth Day 1997, five years after the first Interface Conference. Rapid population growth in California has intensified the inevitable conflict between land development and preservation of natural ecosystems. Sustainable development requires wise use of diminishing natural resources and, where possible, restoration of damaged landscapes. These Earth Week Celebrations brought together resource managers, scientists, politicians, environmental consultants, and concerned citizens in an effort to improve the communication necessary to maintain our natural biodiversity, ecosystem processes and general quality of life. As discussed by our keynote speaker, Michael Soule, the best predictor of habitat loss is population growth and nowhere is this better illustrated than in California. As urban perimeters expand, the interface between wildlands and urban areas increases. Few problems are more vexing than how to manage the fire prone ecosystems indigenous to California at this urban interface. Today resource managers face increasing challenges of dealing with this problem and the lead-off section of the proceedings considers both the theoretical basis for making decisions related to prescribed burning and the practical application. Habitat fragmentation is an inevitable consequence of development patterns with significant impacts on animal and plant populations. Managers must be increasingly resourceful in dealing with problems of fragmentation and the often inevitable consequences, including susceptibility to invasive oganisms. One approach to dealing with fragmentation problems is through careful landplanning. California is the national leader in the integration of conservation and economics. On Earth Day 1991, Governor Pete Wilson presented an environmental agenda that promised to create between land owners and environmentalists, agreements that would guarantee the protection of

  6. Pelvic Floor Disorders

    MedlinePlus

    ... NICHD Research Information Clinical Trials Resources and Publications Pelvic Floor Disorders: Condition Information Skip sharing on social media links Share this: Page Content What is the pelvic floor? The term "pelvic floor" refers to the group ...

  7. 1st- and 2nd-order motion and texture resolution in central and peripheral vision

    NASA Technical Reports Server (NTRS)

    Solomon, J. A.; Sperling, G.

    1995-01-01

    STIMULI. The 1st-order stimuli are moving sine gratings. The 2nd-order stimuli are fields of static visual texture, whose contrasts are modulated by moving sine gratings. Neither the spatial slant (orientation) nor the direction of motion of these 2nd-order (microbalanced) stimuli can be detected by a Fourier analysis; they are invisible to Reichardt and motion-energy detectors. METHOD. For these dynamic stimuli, when presented both centrally and in an annular window extending from 8 to 10 deg in eccentricity, we measured the highest spatial frequency for which discrimination between +/- 45 deg texture slants and discrimination between opposite directions of motion were each possible. RESULTS. For sufficiently low spatial frequencies, slant and direction can be discriminated in both central and peripheral vision, for both 1st- and for 2nd-order stimuli. For both 1st- and 2nd-order stimuli, at both retinal locations, slant discrimination is possible at higher spatial frequencies than direction discrimination. For both 1st- and 2nd-order stimuli, motion resolution decreases 2-3 times more rapidly with eccentricity than does texture resolution. CONCLUSIONS. (1) 1st- and 2nd-order motion scale similarly with eccentricity. (2) 1st- and 2nd-order texture scale similarly with eccentricity. (3) The central/peripheral resolution fall-off is 2-3 times greater for motion than for texture.

  8. PREFACE: 2nd Workshop on Germanium Detectors and Technologies

    NASA Astrophysics Data System (ADS)

    Abt, I.; Majorovits, B.; Keller, C.; Mei, D.; Wang, G.; Wei, W.

    2015-05-01

    The 2nd workshop on Germanium (Ge) detectors and technology was held at the University of South Dakota on September 14-17th 2014, with more than 113 participants from 8 countries, 22 institutions, 15 national laboratories, and 8 companies. The participants represented the following big projects: (1) GERDA and Majorana for the search of neutrinoless double-beta decay (0νββ) (2) SuperCDMS, EDELWEISS, CDEX, and CoGeNT for search of dark matter; (3) TEXONO for sub-keV neutrino physics; (4) AGATA and GRETINA for gamma tracking; (5) AARM and others for low background radiation counting; (5) as well as PNNL and LBNL for applications of Ge detectors in homeland security. All participants have expressed a strong desire on having better understanding of Ge detector performance and advancing Ge technology for large-scale applications. The purpose of this workshop was to leverage the unique aspects of the underground laboratories in the world and the germanium (Ge) crystal growing infrastructure at the University of South Dakota (USD) by brining researchers from several institutions taking part in the Experimental Program to Stimulate Competitive Research (EPSCoR) together with key leaders from international laboratories and prestigious universities, working on the forefront of the intensity to advance underground physics focusing on the searches for dark matter, neutrinoless double-beta decay (0νββ), and neutrino properties. The goal of the workshop was to develop opportunities for EPSCoR institutions to play key roles in the planned world-class research experiments. The workshop was to integrate individual talents and existing research capabilities, from multiple disciplines and multiple institutions, to develop research collaborations, which includes EPSCor institutions from South Dakota, North Dakota, Alabama, Iowa, and South Carolina to support multi-ton scale experiments for future. The topic areas covered in the workshop were: 1) science related to Ge

  9. Overview of the 2nd Gen 3.7m HIAD Static Load Test

    NASA Technical Reports Server (NTRS)

    Swanson, G. T.; Kazemba, C. D.; Johnson, R. K.; Hughes, S. J.; Calomino, A. M.; Cheatwood, F. M.; Cassell, A. M.; Anderson, P.; Lowery, A.

    2015-01-01

    To support NASAs long term goal of landing humans on Mars, technologies which enable the landing of heavy payloads are being developed. Current entry, decent, and landing technologies are not practical for human class payloads due to geometric constraints dictated by current launch vehicle fairing limitations. Therefore, past and present technologies are now being explored to provide a mass and volume efficient solution to atmospheric entry, including Hypersonic Inflatable Aerodynamic Decelerators (HIADs). In October of 2014, a 3.7m HIAD inflatable structure with an integrated flexible thermal protection sys-tem (F-TPS) was subjected to a static load test series to verify the designs structural performance. The 3.7m HIAD structure was constructed in a 70 deg sphere-cone stacked-toroid configuration using eight inflatable tori, which were joined together using adhesives and high strength textile webbing to help distribute the loads throughout the inflatable structure. The inflatable structure was fabricated using 2nd generation structural materials that permit an increase in use temperature to 400 C+ as compared to the 250 C limitation of the 1st generation materials. In addition to the temperature benefit, these materials also offer a 40 reduction in structure mass. The 3.7m F-TPS was fabricated using high performance materials to protect the inflatable structure from heat loads that would be seen during atmospheric entry. The F-TPS was constructed of 2nd generation TPS materials increasing its heating capability from 35W sq cm to over 100W sq cm. This test article is the first stacked-torus HIAD to be fabricated and tested with a 70 deg sphere-cone. All previous stacked-torus HIADs have employed a 60o sphere-cone. To perform the static load test series, a custom test fixture was constructed. The fixture consisted of a structural tub rim with enough height to allow for dis-placement of the inflatable structure as loads were applied. The tub rim was attached to the

  10. 4. VIEW WEST, WEST SIDE, SHOWING CHANNELS 1ST AND 2ND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    4. VIEW WEST, WEST SIDE, SHOWING CHANNELS 1ST AND 2ND VERTICAL BRACED DOUBLE ANGLES, DIAGONAL BRACING AND CROSS BRACED RAILING - Thirty-Sixth Street Bridge, Spanning Rabbit River, Hamilton, Allegan County, MI

  11. VIEW SOUTH/SOUTHEAST LOOKING DOWN ON 2ND AQUEDUCT AND 1ST AQUEDUCT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    VIEW SOUTH/SOUTHEAST LOOKING DOWN ON 2ND AQUEDUCT AND 1ST AQUEDUCT CASCADES TOWARDS FILTRATION PLANT AND LOS ANGELES RESERVOIR - Los Angeles Aqueduct, Cascades Structures, Los Angeles, Los Angeles County, CA

  12. Production and verification of a 2nd generation clonal group of Japanese flounder, Paralichthys olivaceus

    PubMed Central

    Hou, Jilun; Zhang, Xiaoyan; Wang, Yufen; Sun, Zhaohui; Si, Fei; Jiang, Xiufeng; Liu, Haijin

    2016-01-01

    Clonal fishes are useful tools in biology and aquaculture studies due to their isogenicity. In Japanese flounder (Paralichthys olivaceus), a group of homozygous clones was created by inducing meiogynogenesis in eggs from a mitogynogenetic homozygous diploid. As the clones reached sexual maturity, meiogynogenesis was again induced in order to produce a 2nd generation clonal group of Japanese flounder. After 3 months, there were 611 healthy, surviving individuals. Twenty-four microsatellite markers, that covered all the linkage groups of Japanese flounder, were used to identify the homozygosity of the 2nd generation clones; no heterozygous locus was detected. This indicates that the production of a 2nd generation clonal group of Japanese flounder was successful. Restriction-site DNA associated sequencing at the genomic level also confirmed the homozygosity and clonality of the 2nd generation clonal group. Furthermore, these 2nd generation clones had a small coefficient of variation for body shape indices at 210 days of age and showed a high degree of similarity in body characteristics among individuals. The successful production of 2nd generation clones has laid the foundation for the large-scale production of clonal Japanese flounder. PMID:27767055

  13. 2nd BASHH Oxford Diagnostics Course, November 2015.

    PubMed

    Patel, R R; White, J A; Menon-Johansson, A S; Sadiq, S T; Ross, J D

    2016-01-18

    The second British Association for Sexual Health and HIV Oxford Diagnostics Course of 2015 focussed on recent challenges and emerging concepts within diagnostics and service design. In response to increasing sexually transmitted infection rates and subsequent demand on UK sexual health services, multiple approaches to improving patient flow and reducing waiting times were presented. The value of novel remote sexually transmitted infection testing was explored, with a description of the patient journey, emerging demographics and rates of testing uptake for the UK's leading National Health Service provider. A cost-benefit evaluation was made for the use of nucleic acid amplification tests versus traditional microscopy and culture for detecting Trichomonas vaginalis, with practical consideration of application to higher risk groups. Two speakers stressed the importance of vigilance against growing antimicrobial resistance. The significance of testing for genotypic markers for antimicrobial resistance, and the emergence of point-of-care tests for resistance were also presented. The meeting closed with a first-hand account of tendering, and practical advice on rebuilding professional relationships and services after a competitive process.

  14. Mixed-Up Floors.

    ERIC Educational Resources Information Center

    Shaw, Richard

    2001-01-01

    Examines the maintenance management problems inherent in cleaning multiple flooring materials revealing the need for school officials to keep it simple when choosing flooring types. Also highlighted is a carpet recycling program used by Wright State University (Ohio). (GR)

  15. Cleaning up Floor Care.

    ERIC Educational Resources Information Center

    Carr, Richard; McLean, Doug

    1995-01-01

    Discusses how educational-facility maintenance departments can cut costs in floor cleaning through careful evaluation of floor equipment and products. Tips for choosing carpet detergents are highlighted. (GR)

  16. FIRST FLOOR FRONT ROOM. SECOND FLOOR HAS BEEN REMOVED NOTE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    FIRST FLOOR FRONT ROOM. SECOND FLOOR HAS BEEN REMOVED-- NOTE PRESENCE OF SECOND FLOOR WINDOWS (THE LATTER FLOOR WAS REMOVED MANY YEARS AGO), See also PA-1436 B-12 - Kid-Physick House, 325 Walnut Street, Philadelphia, Philadelphia County, PA

  17. Madeira Extreme Floods: 2009/2010 Winter. Case study - 2nd and 20th of February

    NASA Astrophysics Data System (ADS)

    Pires, V.; Marques, J.; Silva, A.

    2010-09-01

    Floods are at world scale the natural disaster that affects a larger fraction of the population. It is a phenomenon that extends it's effects to the surrounding areas of the hydrographic network (basins, rivers, dams) and the coast line. Accordingly to USA FEMA (Federal Emergency Management Agency) flood can be defined as:"A general and temporary condition of partial or complete inundation of two or more acres of normally dry land area or of two or more properties from: Overflow of inland or tidal waters; Unusual and rapid accumulation or runoff of surface waters from any source; Mudflow; Collapse or subsidence of land along the shore of a lake or similar body of water as a result of erosion or undermining caused by waves or currents of water exceeding anticipated cyclical levels that result in a flood as defined above." A flash flood is the result of intense and long duration of continuous precipitation and can result in dead casualties (i.e. floods in mainland Portugal in 1967, 1983 and 1997). The speed and strength of the floods either localized or over large areas, results in enormous social impacts either by the loss of human lives and or the devastating damage to the landscape and human infrastructures. The winter of 2009/2010 in Madeira Island was characterized by several episodes of very intense precipitation (specially in December 2009 and February 2010) adding to a new record of accumulated precipitation since there are records in the island. In February two days are especially rainy with absolute records for the month of February (daily records since 1949): 111mm and 97mm on the 2nd and 20th respectively. The accumulated precipitation ended up with the terrible floods on the 20th of February causing the lost of dozens of human lives and hundreds of millions of Euros of losses The large precipitation occurrences either more intense precipitation in a short period or less intense precipitation during a larger period are sometimes the precursor of

  18. BOOK REVIEW: Mind, Matter and Quantum Mechanics (2nd edition)

    NASA Astrophysics Data System (ADS)

    Mahler, G.

    2004-07-01

    that theory, construed as a description of reality.' This is taken to be entirely different within quantum mechanics. `The core idea of quantum mechanics is to describe our activities as knowledge-seeking and knowledge-using agents.' `21st century science does not reduce human beings to mechanical automata. Rather it elevates human beings to agents whose free choices can, according to the known laws, actually influence their behaviour.' An example with respect to perception is discussed: `Why, when we look at a triangle, do we experience three lines joined at three points and not some pattern of neuron firings?' The brain `does not convert an actual whole triangle into some jumbled set of particle motions; rather it converts a concatenation of separate external events into the actualization of some single integrated pattern of neural activity that is congruent to the perceived whole triangle.' How convincing is this proposal? It is hard to tell. I think Henry Stapp did a good job, but there are tight limitations to any such endeavour. Quantum mechanics is often strange indeed, but it also gives rise to our classical world around us. For the emergence of classicality jumps and measurement projections (the basic phenomena connected with those fundamental events of choice) are not needed. Therefore, I doubt whether the explanation of the evolution of our world really allows (or requires) that much free choice. On the other hand, most scientist will agree that empirical science was not possible without free will: we could not ask independent questions if this asking was part of a deterministic trajectory. The fact that the result of a quantum measurement is indeterminate (within given probabilities) does certainly not explain free will. How about the type of measurment? The experimentalist will have to assume that he can select the pertinent observable within some limits. But given a certain design the so-called pointer basis (producing stable measurement results) is no

  19. Emergence of morel (Morchella) and pixie cup (geopyxis carbonaria) ascocarps in response to the intensity of forest floor combustion during a wildfire.

    PubMed

    Greene, David F; Hesketh, Michael; Pounden, Edith

    2010-01-01

    We studied the density of ascocarps (mushrooms) of morels (Morchella) and pixie cups (Geo-pyxis carbonaria) as a function of postfire duff (forest floor organic layer) depth in the first 4 y after a wildfire. The great majority of ascocarps of both species appeared in the first summer (2004) after an Aug 2003 fire in predominantly pine-spruce montane stands in Kootenay National Park, British Columbia. The spatial distribution of the ascocarps of both species was strongly biased toward (i) microsites with thin postfire duff and (ii) proximity to standing burned tree trunks. The bases of ascocarps of both species invariably were found just below the surface of the mineral soil. A field experiment in nearby intact forest showed that complete or partial duff removal in the absence of damage to the roots or crown did not lead to ascocarps of either species. We conclude that for both fungal species an unusually large abundance of ascocarps simultaneously requires damage to the associated trees and major duff reduction.

  20. 2nd International Forum for Surveillance and Control of Mosquitoes and Mosquito-borne Diseases

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The Entomological Society of China (ESC) and Beijing Institute of Microbiology and Epidemiology (BIME) hosted the 2nd International Forum for Surveillance and Control of Mosquitoes and Mosquito-borne Diseases in Beijing, China, May 23-27, 2011. The theme of the Forum was “Impact of global climate ch...

  1. Methods for the Determination of Chemical Substances in Marine and Estuarine Environmental Matrices - 2nd Edition

    EPA Science Inventory

    This NERL-Cincinnati publication, “Methods for the Determination of Chemical Substances in Marine and Estuarine Environmental Matrices - 2nd Edition” was prepared as the continuation of an initiative to gather together under a single cover a compendium of standardized laborato...

  2. Stem cells and cancer immunotherapy: Arrowhead’s 2nd annual cancer immunotherapy conference

    PubMed Central

    2014-01-01

    Investigators from academia and industry gathered on April 4 and 5, 2013, in Washington DC at the Arrowhead’s 2nd Annual Cancer Immunotherapy Conference. Two complementary concepts were discussed: cancer “stem cells” as targets and therapeutic platforms based on stem cells.

  3. Proceedings of the 2nd symposium on valves for coal conversion and utilization

    SciTech Connect

    Maxfield, D.A.

    1981-01-01

    The 2nd symposium on valves for coal conversion and utilization was held October 15 to 17, 1980. It was sponsored by the US Department of Energy, Morgantown Energy Technology Center, in cooperation with the Valve Manufacturers Association. Seventeen papers have been entered individually into EDB and ERA. (LTN)

  4. Evaluation of a Hand Washing Program for 2nd-Graders

    ERIC Educational Resources Information Center

    Tousman, Stuart; Arnold, Dani; Helland, Wealtha; Roth, Ruth; Heshelman, Nannatte; Castaneda, Oralia; Fischer, Emily; O'Neil, Kristen; Bileto, Stephanie

    2007-01-01

    The purpose of this project was to determine if a multiple-week learner-centered hand washing program could improve hand hygiene behaviors of 2nd-graders in a northern Illinois public school system. Volunteers from the Rockford Hand Washing Coalition went into 19 different classrooms for 4 consecutive weeks and taught a learner-centered program.…

  5. Technical Adequacy of the Disruptive Behavior Rating Scale-2nd Edition--Self-Report

    ERIC Educational Resources Information Center

    Erford, Bradley T.; Miller, Emily M.; Isbister, Katherine

    2015-01-01

    This study provides preliminary analysis of the Disruptive Behavior Rating Scale-2nd Edition--Self-Report, which was designed to screen individuals aged 10 years and older for anxiety and behavior symptoms. Score reliability and internal and external facets of validity were good for a screening-level test.

  6. The Effect of Using Computer Edutainment on Developing 2nd Primary Graders' Writing Skills

    ERIC Educational Resources Information Center

    Mohammed Abdel Raheem, Azza Ashraf

    2011-01-01

    The present study attempted to examine the effect of using computer edutainment on developing 2nd graders' writing skills. The study comprised thirty-second year primary stage enrolled in Bani Hamad primary governmental school, Minia governorate. The study adopted the quasi-experimental design. Thirty participants were randomly assigned to one…

  7. 2nd-Order CESE Results For C1.4: Vortex Transport by Uniform Flow

    NASA Technical Reports Server (NTRS)

    Friedlander, David J.

    2015-01-01

    The Conservation Element and Solution Element (CESE) method was used as implemented in the NASA research code ez4d. The CESE method is a time accurate formulation with flux-conservation in both space and time. The method treats the discretized derivatives of space and time identically and while the 2nd-order accurate version was used, high-order versions exist, the 2nd-order accurate version was used. In regards to the ez4d code, it is an unstructured Navier-Stokes solver coded in C++ with serial and parallel versions available. As part of its architecture, ez4d has the capability to utilize multi-thread and Messaging Passage Interface (MPI) for parallel runs.

  8. Floors: Care and Maintenance.

    ERIC Educational Resources Information Center

    Post Office Dept., Washington, DC.

    Guidelines, methods and policies regarding the care and maintenance of post office building floors are overviewed in this handbook. Procedures outlined are concerned with maintaining a required level of appearance without wasting manpower. Flooring types and characteristics and the particular cleaning requirements of each type are given along with…

  9. School Flooring Factors

    ERIC Educational Resources Information Center

    McGrath, John

    2012-01-01

    With all of the hype that green building is receiving throughout the school facility-management industry, it's easy to overlook some elements that may not be right in front of a building manager's nose. It is helpful to examine the role floor covering plays in a green building project. Flooring is one of the most significant and important systems…

  10. A Communications Guide for Sustainable Development: How Interested Parties Become Partners, 2nd Edition

    SciTech Connect

    Fowler, Kimberly M.; Hund, Gretchen; Engel-Cox, Jill A.

    2016-03-06

    The 2nd edition is an updated version plus an e-book. This book was developed to assist organizations in designing and managing their communication and stakeholder involvement programs. The guidebook describes a step-by-step approach, provides case studies, and presents tools to consider. The book uses a scenario approach to outline changes an organization may confront, and provides a menu of communication and engagement activities that support organizational decision making.

  11. Summary and agreement statement of the 2nd International Conference on Concussion in Sport, Prague 2004

    PubMed Central

    McCrory, P; Johnston, K; Meeuwisse, W; Aubry, M; Cantu, R; Dvorak, J; Graf-Baumann, T; Kelly, J; Lovell, M; Schamasch, P

    2005-01-01

    In November 2001, the 1st International Symposium on Concussion in Sport was held in Vienna, Austria to provide recommendations for the improvement of safety and health of athletes who suffer concussive injuries in ice hockey, football (soccer), and other sports. The 2nd International Symposium on Concussion in Sport was organised by the same group and held in Prague, Czech Republic in November 2004. It resulted in a revision and update of the Vienna consensus recommendations, which are presented here.

  12. Summary and agreement statement of the 2nd International Conference on Concussion in Sport, Prague 2004

    PubMed Central

    McCrory, P; Johnston, K; Meeuwisse, W; Aubry, M; Cantu, R; Dvorak, J; Graf-Baumann, T; Kelly, J; Lovell, M; Schamasch, P

    2005-01-01

    In November 2001, the 1st International Symposium on Concussion in Sport was held in Vienna, Austria to provide recommendations for the improvement of safety and health of athletes who suffer concussive injuries in ice hockey, football (soccer), and other sports. The 2nd International Symposium on Concussion in Sport was organised by the same group and held in Prague, Czech Republic in November 2004. It resulted in a revision and update of the Vienna consensus recommendations, which are presented here. PMID:15793085

  13. Graphical shapes of the 2nd type singularities of a 3-RR̠R planar mechanism

    NASA Astrophysics Data System (ADS)

    Buium, F.; Duca, C.; Doroftei, I.; Leohchi, D.

    2016-08-01

    This paper intends to discuss about singularity curves of 2nd type inside the workspace of a 3R̠RR planar parallel mechanism used as robot structure. In order to attain this goal we will use certain variation of the links dimensional parameters. This characterization of the mechanism singularities located inside mechanism workspace depends on the dimensional parameters and can be useful in mechanism designing accorded to some functional particularities in the sense that it can help in avoiding singular configurations.

  14. Idaho National Laboratory Quarterly Performance Analysis for the 2nd Quarter FY 2015

    SciTech Connect

    Mitchell, Lisbeth A.

    2015-04-01

    This report is published quarterly by the Idaho National Laboratory (INL) Quality and Performance Management Organization. The Department of Energy (DOE) Occurrence Reporting and Processing System (ORPS), as prescribed in DOE Order 232.2, “Occurrence Reporting and Processing of Operations Information,” requires a quarterly analysis of events, both reportable and not reportable, for the previous 12 months. This report is the analysis of events for the 2nd Qtr FY-15.

  15. FIRST FLOOR REAR ROOM. SECOND FLOOR HAS BEEN REMOVED NOTE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    FIRST FLOOR REAR ROOM. SECOND FLOOR HAS BEEN REMOVED-- NOTE PRESENCE OF SECOND FLOOR WINDOWS AT LEFT. See also PA-1436 B-6 - Kid-Physick House, 325 Walnut Street, Philadelphia, Philadelphia County, PA

  16. FIRST FLOOR REAR ROOM. SECOND FLOOR HAS BEEN REMOVED NOTE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    FIRST FLOOR REAR ROOM. SECOND FLOOR HAS BEEN REMOVED-- NOTE PRESENCE OF SECOND FLOOR WINDOWS AT LEFT. See also PA-1436 B-13 - Kid-Physick House, 325 Walnut Street, Philadelphia, Philadelphia County, PA

  17. Application research on enhancing near-infrared micro-imaging quality by 2nd derivative

    NASA Astrophysics Data System (ADS)

    Wang, Dong; Ma, Zhi-hong; Zhao, Liu; Wang, Bei-hong; Han, Ping; Pan, Li-gang; Wang, Ji-hua

    2013-08-01

    Near-infrared micro-imaging will not only provide the sample's spatial distribution information, but also the spectroscopic information of each pixel. In this thesis, it took the artificial sample of wheat flour and formaldehyde sodium sulfoxylate distribution given for example to research the data processing method for enhancing the quality of near-infrared micro-imaging. Near-infrared spectroscopic feature of wheat flour and formaldehyde sodium sulfoxylate being studied on, compare correlation imaging and 2nd derivative imaging were applied in the imaging processing of the near-infrared micro-image of the artificial sample. Furthermore, the two methods were combined, i.e. 2nd derivative compare correlation imaging was acquired. The result indicated that the difference of the correlation coefficients between the two substances, i.e. wheat flour and formaldehyde sodium sulfoxylate, and the reference spectrum has been increased from 0.001 in compare correlation image to 0.796 in 2nd derivative compare correlation image respectively, which enhances the imaging quality efficiently. This study will, to some extent, be of important reference significance to near-infrared micro-imaging method research of agricultural products and foods.

  18. NASA 2nd Generation RLV Program Introduction, Status and Future Plans

    NASA Technical Reports Server (NTRS)

    Dumbacher, Dan L.; Smith, Dennis E. (Technical Monitor)

    2002-01-01

    The Space Launch Initiative (SLI), managed by the Second Generation Reusable Launch Vehicle (2ndGen RLV) Program, was established to examine the possibility of revolutionizing space launch capabilities, define conceptual architectures, and concurrently identify the advanced technologies required to support a next-generation system. Initial Program funds have been allocated to design, evaluate, and formulate realistic plans leading to a 2nd Gen RLV full-scale development (FSD) decision by 2006. Program goals are to reduce both risk and cost for accessing the limitless opportunities afforded outside Earth's atmosphere fo civil, defense, and commercial enterprises. A 2nd Gen RLV architecture includes a reusable Earth-to-orbit launch vehicle, an on-orbit transport and return vehicle, ground and flight operations, mission planning, and both on-orbit and on-the-ground support infrastructures All segments of the architecture must advance in step with development of the RLV if a next-generation system is to be fully operational early next decade. However, experience shows that propulsion is the single largest contributor to unreliability during ascent, requires the largest expenditure of time for maintenance, and takes a long time to develop; therefore, propulsion is the key to meeting safety, reliability, and cost goals. For these reasons, propulsion is SLI's top technology investment area.

  19. Development of fetal intestinal length during 2nd-trimester in normal and pathologic pregnancies.

    PubMed

    Marnerides, Andreas; Ghazi, Sam; Sundberg, Anders; Papadogiannakis, Nikos

    2012-01-01

    Linear growth of the human fetal gastrointestinal tract is not often discussed in the literature, and little is known about the effects of chromosomal abnormalities and intrauterine growth restriction (IUGR) on intestinal length, especially during the 2nd trimester. Accurate evaluation of intestinal length and knowledge of normal and reference values are of clinical importance. For example, intestinal resection may be necessary in preterm infants with necrotizing enterocolitis or mid-gut volvulus, and the surgeon should use data to be judicious in the amount removed. Linear measurements are essential in evaluating fetal development ultrasonographically and are an integral part of the postmortem examination. The intestinal lengths of 203 2nd-trimester fetuses and premature infants were measured. Small intestine length (SIL), colon length (CL), total bowel length (TBL; TBL  =  SIL + CL), and the length of the appendix (AL) increased with gestational age. No differences between the genders were observed. Colon length increased secondary to maceration, but no such effects were shown on SIL, TBL, or AL. No differences were shown in relation to IUGR. Small intestine length, CL, and TBL, but not AL, were shorter in fetuses with trisomy 21. Appendix length was not affected by any of the studied factors. We propose that the measurement of the length of the appendix may be used as an additional parameter for the postmortem evaluation of gestational age. Furthermore, its assessment may have potential as an ultrasonographic indicator of gestational age, particularly for the 2nd trimester.

  20. Healing of rat mouth mucosa after irradiation with CO2, Nd:YAG, and CO2-Nd:YAG combination lasers.

    PubMed

    Luomanen, M; Rauhamaa-Mäkinen, R; Meurman, J H; Kosloff, T; Tiitta, O

    1994-08-01

    The healing process of wounds made by a combination laser was studied in 90 rats. The laser system enabled both separate and combined use of CO2 and Nd:YAG laser irradiations. The laser wounds and the control excision wounds made by alligator forceps appeared on both sides of the tongue. Specimens from the wound sites were taken immediately, 6 h, and 1, 2, 4, 7, 11, 21, 28, and 42 days after surgery. The wound-healing process was studied by macroscopic evaluation before preparing the specimens for light microscopy. Some differences were noted in the wound-healing process among the three groups into which the experimental animals were divided. Tissue coagulation damage was most extensive in the Nd:YAG laser sites, where it was observed in its full extent 4 days after surgery. Epithelial cells were seen to begin to proliferate in all the wounds 6 h after surgery. Re-epithelialization was completed by between 7 (CO2) and 21 days (Nd:YAG) at all the wound sites. The inflammatory cell infiltration was more prominent in the Nd:YAG and the CO2-Nd:YAG combination laser wounds than in the CO2 and excision wounds during healing. Tissue regeneration occurred faster with less contraction in the combination CO2-Nd:YAG wounds than in Nd:YAG wounds. The best macroscopic healing result was seen in the CO2 wound sites. The combination laser was effective both at cutting and at coagulating tissue. Combining the CO2 and Nd:YAG laser irradiation into one beam resulted in a greater incision depth than what could have been expected from using the two lasers separately.

  1. 2nd Radio and Antenna Days of the Indian Ocean (RADIO 2014)

    NASA Astrophysics Data System (ADS)

    2014-10-01

    It was an honor and a great pleasure for all those involved in its organization to welcome the participants to the ''Radio and Antenna Days of the Indian Ocean'' (RADIO 2014) international conference that was held from 7th to 10th April 2014 at the Sugar Beach Resort, Wolmar, Flic-en-Flac, Mauritius. RADIO 2014 is the second of a series of conferences organized in the Indian Ocean region. The aim of the conference is to discuss recent developments, theories and practical applications covering the whole scope of radio-frequency engineering, including radio waves, antennas, propagation, and electromagnetic compatibility. The RADIO international conference emerged following discussions with engineers and scientists from the countries of the Indian Ocean as well as from other parts of the world and a need was felt for the organization of such an event in this region. Following numerous requests, the Island of Mauritius, worldwide known for its white sandy beaches and pleasant tropical atmosphere, was again chosen for the organization of the 2nd RADIO international conference. The conference was organized by the Radio Society, Mauritius and the Local Organizing Committee consisted of scientists from SUPELEC, France, the University of Mauritius, and the University of Technology, Mauritius. We would like to take the opportunity to thank all people, institutions and companies that made the event such a success. We are grateful to our gold sponsors CST and FEKO as well as URSI for their generous support which enabled us to partially support one PhD student and two scientists to attend the conference. We would also like to thank IEEE-APS and URSI for providing technical co-sponsorship. More than hundred and thirty abstracts were submitted to the conference. They were peer-reviewed by an international scientific committee and, based on the reviews, either accepted, eventually after revision, or rejected. RADIO 2014 brought together participants from twenty countries spanning

  2. A Sea Floor Penetrometer.

    DTIC Science & Technology

    processed through an analog-to-digital (A/D) converter, and stored in the memory of a mini-computer. Computer algorithms are applied to the deceleration data to provide real-time sea floor classification.

  3. Mars Curriculum for K-12 Science Education, 2nd Edition, Making Tracks on Mars Teacher Resource and Activity Guide

    NASA Astrophysics Data System (ADS)

    Aubele, J. C.; Stanley, J.; Grochowski, A.; Jones, K.; Aragon, J.

    2012-03-01

    A Mars K-12 curriculum, created by the New Mexico Museum of Natural History & Science, is now in 2nd edition DVD, approved by NASA educational review, 508 compliant to ensure accessibility for people with disabilities, and applicable to MSL.

  4. PREFACE: 2nd International Conference on Innovative Materials, Structures and Technologies

    NASA Astrophysics Data System (ADS)

    Ručevskis, Sandris

    2015-11-01

    The 2nd International Conference on Innovative Materials, Structures and Technologies (IMST 2015) took place in Riga, Latvia from 30th September - 2nd October, 2015. The first event of the conference series, dedicated to the 150th anniversary of the Faculty of Civil Engineering of Riga Technical University, was held in 2013. Following the established tradition, the aim of the conference was to promote and discuss the latest results of industrial and academic research carried out in the following engineering fields: analysis and design of advanced structures and buildings; innovative, ecological and energy efficient building materials; maintenance, inspection and monitoring methods; construction technologies; structural management; sustainable and safe transport infrastructure; and geomatics and geotechnics. The conference provided an excellent opportunity for leading researchers, representatives of the industrial community, engineers, managers and students to share the latest achievements, discuss recent advances and highlight the current challenges. IMST 2015 attracted over 120 scientists from 24 countries. After rigorous reviewing, over 80 technical papers were accepted for publication in the conference proceedings. On behalf of the organizing committee I would like to thank all the speakers, authors, session chairs and reviewers for their efficient and timely effort. The 2nd International Conference on Innovative Materials, Structures and Technologies was organized by the Faculty of Civil Engineering of Riga Technical University with the support of the Latvia State Research Programme under the grant agreement "INNOVATIVE MATERIALS AND SMART TECHNOLOGIES FOR ENVIRONMENTAL SAFETY, IMATEH". I would like to express sincere gratitude to Juris Smirnovs, Dean of the Faculty of Civil Engineering, and Andris Chate, manager of the Latvia State Research Programme. Finally, I would like to thank all those who helped to make this event happen. Special thanks go to Diana

  5. Systems Engineering Approach to Technology Integration for NASA's 2nd Generation Reusable Launch Vehicle

    NASA Technical Reports Server (NTRS)

    Thomas, Dale; Smith, Charles; Thomas, Leann; Kittredge, Sheryl

    2002-01-01

    The overall goal of the 2nd Generation RLV Program is to substantially reduce technical and business risks associated with developing a new class of reusable launch vehicles. NASA's specific goals are to improve the safety of a 2nd generation system by 2 orders of magnitude - equivalent to a crew risk of 1-in-10,000 missions - and decrease the cost tenfold, to approximately $1,000 per pound of payload launched. Architecture definition is being conducted in parallel with the maturating of key technologies specifically identified to improve safety and reliability, while reducing operational costs. An architecture broadly includes an Earth-to-orbit reusable launch vehicle, on-orbit transfer vehicles and upper stages, mission planning, ground and flight operations, and support infrastructure, both on the ground and in orbit. The systems engineering approach ensures that the technologies developed - such as lightweight structures, long-life rocket engines, reliable crew escape, and robust thermal protection systems - will synergistically integrate into the optimum vehicle. To best direct technology development decisions, analytical models are employed to accurately predict the benefits of each technology toward potential space transportation architectures as well as the risks associated with each technology. Rigorous systems analysis provides the foundation for assessing progress toward safety and cost goals. The systems engineering review process factors in comprehensive budget estimates, detailed project schedules, and business and performance plans, against the goals of safety, reliability, and cost, in addition to overall technical feasibility. This approach forms the basis for investment decisions in the 2nd Generation RLV Program's risk-reduction activities. Through this process, NASA will continually refine its specialized needs and identify where Defense and commercial requirements overlap those of civil missions.

  6. Systems Engineering Approach to Technology Integration for NASA's 2nd Generation Reusable Launch Vehicle

    NASA Technical Reports Server (NTRS)

    Thomas, Dale; Smith, Charles; Thomas, Leann; Kittredge, Sheryl

    2002-01-01

    The overall goal of the 2nd Generation RLV Program is to substantially reduce technical and business risks associated with developing a new class of reusable launch vehicles. NASA's specific goals are to improve the safety of a 2nd-generation system by 2 orders of magnitude - equivalent to a crew risk of 1-in-10,000 missions - and decrease the cost tenfold, to approximately $1,000 per pound of payload launched. Architecture definition is being conducted in parallel with the maturating of key technologies specifically identified to improve safety and reliability, while reducing operational costs. An architecture broadly includes an Earth-to-orbit reusable launch vehicle, on-orbit transfer vehicles and upper stages, mission planning, ground and flight operations, and support infrastructure, both on the ground and in orbit. The systems engineering approach ensures that the technologies developed - such as lightweight structures, long-life rocket engines, reliable crew escape, and robust thermal protection systems - will synergistically integrate into the optimum vehicle. To best direct technology development decisions, analytical models are employed to accurately predict the benefits of each technology toward potential space transportation architectures as well as the risks associated with each technology. Rigorous systems analysis provides the foundation for assessing progress toward safety and cost goals. The systems engineering review process factors in comprehensive budget estimates, detailed project schedules, and business and performance plans, against the goals of safety, reliability, and cost, in addition to overall technical feasibility. This approach forms the basis for investment decisions in the 2nd Generation RLV Program's risk-reduction activities. Through this process, NASA will continually refine its specialized needs and identify where Defense and commercial requirements overlap those of civil missions.

  7. Life Cycle Systems Engineering Approach to NASA's 2nd Generation Reusable Launch Vehicle

    NASA Technical Reports Server (NTRS)

    Thomas, Dale; Smith, Charles; Safie, Fayssal; Kittredge, Sheryl

    2002-01-01

    The overall goal of the 2nd Generation RLV Program is to substantially reduce technical and business risks associated with developing a new class of reusable launch vehicles. NASA's specific goals are to improve the safety of a 2nd- generation system by 2 orders of magnitude - equivalent to a crew risk of 1 -in- 10,000 missions - and decrease the cost tenfold, to approximately $1,000 per pound of payload launched. Architecture definition is being conducted in parallel with the maturating of key technologies specifically identified to improve safety and reliability, while reducing operational costs. An architecture broadly includes an Earth-to-orbit reusable launch vehicle, on-orbit transfer vehicles and upper stages, mission planning, ground and flight operations, and support infrastructure, both on the ground and in orbit. The systems engineering approach ensures that the technologies developed - such as lightweight structures, long-life rocket engines, reliable crew escape, and robust thermal protection systems - will synergistically integrate into the optimum vehicle. Given a candidate architecture that possesses credible physical processes and realistic technology assumptions, the next set of analyses address the system's functionality across the spread of operational scenarios characterized by the design reference missions. The safety/reliability and cost/economics associated with operating the system will also be modeled and analyzed to answer the questions "How safe is it?" and "How much will it cost to acquire and operate?" The systems engineering review process factors in comprehensive budget estimates, detailed project schedules, and business and performance plans, against the goals of safety, reliability, and cost, in addition to overall technical feasibility. This approach forms the basis for investment decisions in the 2nd Generation RLV Program's risk-reduction activities. Through this process, NASA will continually refine its specialized needs and

  8. PREFACE: 2nd International Meeting for Researchers in Materials and Plasma Technology

    NASA Astrophysics Data System (ADS)

    Niño, Ely Dannier V.

    2013-11-01

    These proceedings present the written contributions of the participants of the 2nd International Meeting for Researchers in Materials and Plasma Technology, 2nd IMRMPT, which was held from February 27 to March 2, 2013 at the Pontificia Bolivariana Bucaramanga-UPB and Santander and Industrial - UIS Universities, Bucaramanga, Colombia, organized by research groups from GINTEP-UPB, FITEK-UIS. The IMRMPT, was the second version of biennial meetings that began in 2011. The three-day scientific program of the 2nd IMRMPT consisted in 14 Magisterial Conferences, 42 Oral Presentations and 48 Poster Presentations, with the participation of undergraduate and graduate students, professors, researchers and entrepreneurs from Colombia, Russia, France, Venezuela, Brazil, Uruguay, Argentina, Peru, Mexico, United States, among others. Moreover, the objective of IMRMPT was to bring together national and international researchers in order to establish scientific cooperation in the field of materials science and plasma technology; introduce new techniques of surface treatment of materials to improve properties of metals in terms of the deterioration due to corrosion, hydrogen embrittlement, abrasion, hardness, among others; and establish cooperation agreements between universities and industry. The topics covered in the 2nd IMRMPT include New Materials, Surface Physics, Laser and Hybrid Processes, Characterization of Materials, Thin Films and Nanomaterials, Surface Hardening Processes, Wear and Corrosion / Oxidation, Modeling, Simulation and Diagnostics, Plasma Applications and Technologies, Biomedical Coatings and Surface Treatments, Non Destructive Evaluation and Online Process Control, Surface Modification (Ion Implantation, Ion Nitriding, PVD, CVD). The editors hope that those interested in the are of materials science and plasma technology, enjoy the reading that reflect a wide range of topics. It is a pleasure to thank the sponsors and all the participants and contributors for

  9. 2ND EF Conference in Turbulent Heat Transfer, Manchester, UK 1998. Volume 1

    DTIC Science & Technology

    1998-06-01

    1WB.7C 1W1UC •v*ataj «vnlMlai i-V 1 iBriMHI MWBlaj fprriatfa ■ HSV Of»U» Ia»fUC T-4UC : BBIW OIJIHIIM 1 *>IMC T»«MC (g) (h) Figure 7 Local...t’ k THE UNIVERSITY y MANCHESTER UMIST 2nd EF Conference in TURBULENT HEAT TRANSFER Manchester, UK 1 998 Approved /or public vil...QXTALTTY INSPECTED 1 CONTENTS VOLUME I Session 1 : Heat Transfer Under Simple Shearing (Chairmen: B. E. Launder and T. J. Hanratty) Y. Na, D. V

  10. Dynamic Recrystallization Behavior of a Coarse-Grained Mg-2Zn-2Nd Magnesium Alloy

    NASA Astrophysics Data System (ADS)

    Wang, Tong; Jonas, John J.; Yue, Stephen

    2017-02-01

    Compression tests were performed on samples of Mg-2Zn-2Nd at 673 K (400 °C) and at three different strain rates. At 0.1/s, three mechanisms of dynamic recrystallization (DRX) were observed to operate: discontinuous DRX (DDRX), twinning DRX (TDRX), and continuous DRX (CDRX). At 0.01/s, DDRX took place as a result of grain boundary bulging, followed by CDRX on further straining. At 0.001/s, only CDRX was observed. At a strain of 0.3, the activation of multiple DRX mechanisms in the 0.1/s samples produced the weakest deformation textures.

  11. Secular Motion in a 2nd Degree and Order-Gravity Field with no Rotation

    NASA Astrophysics Data System (ADS)

    Scheeres, D. J.; Hu, W.

    2001-03-01

    The motion of a particle about a non-rotating 2nd degree and order-gravity field is investigated. Averaging conditions are applied to the particle motion and a qualitative analysis which reveals the general character of motion in this system is given. It is shown that the orbit plane will either be stationary or precess about the body's axis of minimum or maximum moment of inertia. It is also shown that the secular equations for this system can be integrated in terms of trigonometric, hyperbolic or elliptic functions. The explicit solutions are derived in all cases of interest.

  12. Effects of Thermal Cycling on Control and Irradiated EPC 2nd Generation GaN FETs

    NASA Technical Reports Server (NTRS)

    Patterson, Richard L.; Scheick, Leif; Lauenstein, Jean-Marie; Casey, Megan; Hammoud, Ahmad

    2013-01-01

    The power systems for use in NASA space missions must work reliably under harsh conditions including radiation, thermal cycling, and exposure to extreme temperatures. Gallium nitride semiconductors show great promise, but information pertaining to their performance is scarce. Gallium nitride N-channel enhancement-mode field effect transistors made by EPC Corporation in a 2nd generation of manufacturing were exposed to radiation followed by long-term thermal cycling in order to address their reliability for use in space missions. Results of the experimental work are presented and discussed.

  13. VLT interferometer upgrade for the 2nd generation of interferometric instruments

    NASA Astrophysics Data System (ADS)

    Gonté, Frederic; Woillez, Julien; Schuhler, Nicolas; Egner, Sebastian; Merand, Antoine; Abad, José Antonio; Abadie, Sergio; Abuter, Roberto; Acuña, Margarita; Allouche, Fatmé; Alonso, Jaime; Andolfalto, Luigi; Antonelli, Pierre; Avila, Gerardo; Barriga, Pablo José; Beltran, Juan; Berger, Jean-Philippe; Bolados, Carlos; Bonnet, Henri; Bourget, Pierre; Brast, Roland; Bristow, Paul; Caniguante, Luis; Castillo, Roberto; Conzelmann, Ralf; Cortes, Angela; Delplancke, Françoise; Del Valle, Diego; Derie, Frederic; Diaz, Alvaro; Donoso, Reinaldo; Dorn, Reinhold; Duhoux, Philippe; Dupuy, Christophe; Eisenhauer, Frank; Elao, Christian; Fuenteseca, Eloy; Fernandez, Ruben; Gaytan, Daniel; Glindemann, Andreas; Gonzales, Jaime; Guieu, Sylvain; Guisard, Stephane; Haguenauer, Pierre; Haimerl, Andreas; Heinz, Volker; Henriquez, Juan Pablo; van der Heyden, P.; Hubin, Norbert; Huerta, Rodrigo; Jochum, Lieselotte; Leiva, Alfredo; Lévêque, Samuel; Lizon, Jean-Louis; Luco, Fernando; Mardones, Pedro; Mellado, Angel; Osorio, Juan; Ott, Jürgen; Pallanca, Laurent; Pavez, Marcus; Pasquini, Luca; Percheron, Isabelle; Pirard, Jean-Francois; Than Phan, Duc; Pineda, Juan Carlos; Pino, Andres; Poupar, Sebastien; Ramírez, Andres; Reinero, Claudio; Riquelme, Miguel; Romero, Juan; Rivinius, Thomas; Rojas, Chester; Rozas, Felix; Salgado, Fernando; Scheithauer, Silvia; Schmid, Christian; Schöller, Markus; Siclari, Waldo; Stephan, Christian; Tamblay, Richard; Tapia, Mario; Tristram, Konrad; Valdes, Guillermo; de Wit, Willem-Jan; Wright, Andrew; Zins, Gerard

    2016-08-01

    ESO is undertaking a large upgrade of the infrastructure on Cerro Paranal in order to integrate the 2nd generation of interferometric instruments Gravity and MATISSE, and increase its performance. This upgrade started mid 2014 with the construction of a service station for the Auxiliary Telescopes and will end with the implementation of the adaptive optics system for the Auxiliary telescope (NAOMI) in 2018. This upgrade has an impact on the infrastructure of the VLTI, as well as its sub-systems and scientific instruments.

  14. [How to read and understand Registries for Evaluating Patient Outcomes: A User's Guide (2nd Edition)].

    PubMed

    Yang, Wei; Xie, Yan-Ming

    2013-09-01

    Registry studies (RS) get more and more attention in recent years because it can reflect the health care situations of the real world. There are a number of large scale RS for traditional Chinese medicine (TCM). RS are observational studies that can complement randomized controlled trials (RCT). RS have an irreplaceable position in real word study (RWS), especially for small probability events. There are some different characters and qualities in RS. Registries for Evaluating Patient Outcomes: A User's Guide (2nd Edition) was published by the agency for healthcare research and quality (AHRQ) in 2010. It described the details of how to establish, maintain, and evaluate RS, and using 38 RS samples to illustrate the possible problems in undertaking such research. The User's Guide (2nd Edition) provides a reliable reference document for RS. TCM injections post-marketing safety surveillance RS is a national program involving multiple centers in China. This program can further improve RS quality their application in China and is a good illustration of how to follow this guide accurately.

  15. The relation between 1st grade grey matter volume and 2nd grade math competence.

    PubMed

    Price, Gavin R; Wilkey, Eric D; Yeo, Darren J; Cutting, Laurie E

    2016-01-01

    Mathematical and numerical competence is a critical foundation for individual success in modern society yet the neurobiological sources of individual differences in math competence are poorly understood. Neuroimaging research over the last decade suggests that neural mechanisms in the parietal lobe, particularly the intraparietal sulcus (IPS) are structurally aberrant in individuals with mathematical learning disabilities. However, whether those same brain regions underlie individual differences in math performance across the full range of math abilities is unknown. Furthermore, previous studies have been exclusively cross-sectional, making it unclear whether variations in the structure of the IPS are caused by or consequences of the development of math skills. The present study investigates the relation between grey matter volume across the whole brain and math competence longitudinally in a representative sample of 50 elementary school children. Results show that grey matter volume in the left IPS at the end of 1st grade relates to math competence a year later at the end of 2nd grade. Grey matter volume in this region did not change over that year, and was still correlated with math competence at the end of 2nd grade. These findings support the hypothesis that the IPS and its associated functions represent a critical foundation for the acquisition of mathematical competence.

  16. A novel 2nd-order bandpass MFSS filter with miniaturized structure

    NASA Astrophysics Data System (ADS)

    Fang, C. Y.; Gao, J. S.; Feng, X. G.

    2015-08-01

    In order to effectively obtain a miniaturized structure and good filtering properties, we propose a novel 2nd-order bandpass metamaterial frequency selective surface (MFSS) filter which contains two capacitive layers and one inductive layer, where there are multi-loop metallic patches as shunt capacitor C and planar wire grids as series inductor L respectively. Unlike the traditional operation way—the tuned elements used in resonant surface approximately equal to one wavelength in circumference and the structure thickness with a spacing of a quarter wavelength apart, by changing the value of L and C and matching multilayer dielectric to adjust the LC coupling resonance and the resonance impedance respectively, the proposed MFSS filter can achieves a miniatured structure with ideal bandpass properties. Measurement results of the fabricated prototype of the bandpass filter (BPF) indicate that the dimension of the tuned element on resonant surface is approximately 0.025 wavelength, i.e., 0.025λ. At the same time, the filter has the stable center frequency of f0 = 1.53GHz and the transmittance of T ⩾ 96.3% and high Q-value for the TE/TM wave polarization at various incidence angles. The novel 2nd-order bandpass MFSS filter with miniaturized structure not only can decrease structure dimension, but also has a wide range of applications to microwave and infrared band.

  17. Editorial: 2nd Special Issue on behavior change, health, and health disparities

    PubMed Central

    Higgins, Stephen T.

    2016-01-01

    This Special Issue of Preventive Medicine (PM) is the 2nd that we have organized on behavior change, health, and health disparities. This is a topic of fundamental importance to improving population health in the U.S. and other industrialized countries that are trying to more effectively manage chronic health conditions. There is broad scientific consensus that personal behavior patterns such as cigarette smoking, other substance abuse, and physical inactivity/obesity are among the most important modifiable causes of chronic disease and its adverse impacts on population health. As such behavior change needs to be a key component of improving population health. There is also broad agreement that while these problems extend across socioeconomic strata, they are overrepresented among more economically disadvantaged populations and contribute directly to the growing problem of health disparities. Hence, behavior change represents an essential step in curtailing that unsettling problem as well. In this 2nd Special Issue, we devote considerable space to the current U.S. prescription opioid addiction epidemic, a crisis that was not addressed in the prior Special Issue. We also continue to devote attention to the two largest contributors to preventable disease and premature death, cigarette smoking and physical inactivity/obesity as well as risks of co-occurrence of these unhealthy behavior patterns. Across each of these topics we included contributions from highly accomplished policymakers and scientists to acquaint readers with recent accomplishments as well as remaining knowledge gaps and challenges to effectively managing these important chronic health problems. PMID:26257372

  18. Scoping analysis of the Advanced Test Reactor using SN2ND

    SciTech Connect

    Wolters, E.; Smith, M.

    2012-07-26

    A detailed set of calculations was carried out for the Advanced Test Reactor (ATR) using the SN2ND solver of the UNIC code which is part of the SHARP multi-physics code being developed under the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program in DOE-NE. The primary motivation of this work is to assess whether high fidelity deterministic transport codes can tackle coupled dynamics simulations of the ATR. The successful use of such codes in a coupled dynamics simulation can impact what experiments are performed and what power levels are permitted during those experiments at the ATR. The advantages of the SN2ND solver over comparable neutronics tools are its superior parallel performance and demonstrated accuracy on large scale homogeneous and heterogeneous reactor geometries. However, it should be noted that virtually no effort from this project was spent constructing a proper cross section generation methodology for the ATR usable in the SN2ND solver. While attempts were made to use cross section data derived from SCALE, the minimal number of compositional cross section sets were generated to be consistent with the reference Monte Carlo input specification. The accuracy of any deterministic transport solver is impacted by such an approach and clearly it causes substantial errors in this work. The reasoning behind this decision is justified given the overall funding dedicated to the task (two months) and the real focus of the work: can modern deterministic tools actually treat complex facilities like the ATR with heterogeneous geometry modeling. SN2ND has been demonstrated to solve problems with upwards of one trillion degrees of freedom which translates to tens of millions of finite elements, hundreds of angles, and hundreds of energy groups, resulting in a very high-fidelity model of the system unachievable by most deterministic transport codes today. A space-angle convergence study was conducted to determine the meshing and angular cubature

  19. [Pelvic floor and pregnancy].

    PubMed

    Fritel, X

    2010-05-01

    Congenital factor, obesity, aging, pregnancy and childbirth are the main risk factors for female pelvic floor disorders (urinary incontinence, anal incontinence, pelvic organ prolapse, dyspareunia). Vaginal delivery may cause injury to the pudendal nerve, the anal sphincter, or the anal sphincter. However the link between these injuries and pelvic floor symptoms is not always determined and we still ignore what might be the ways of prevention. Of the many obstetrical methods proposed to prevent postpartum symptoms, episiotomy, delivery in vertical position, delayed pushing, perineal massage, warm pack, pelvic floor rehabilitation, results are disappointing or limited. Caesarean section is followed by less postnatal urinary incontinence than vaginal childbirth. However this difference tends to disappear with time and following childbirth. Limit the number of instrumental extractions and prefer the vacuum to forceps could reduce pelvic floor disorders after childbirth. Ultrasound examination of the anal sphincter after a second-degree perineal tear is useful to detect and repair infra-clinic anal sphincter lesions. Scientific data is insufficient to justify an elective cesarean section in order to avoid pelvic floor symptoms in a woman without previous disorders.

  20. Cooling Floor AC Systems

    NASA Astrophysics Data System (ADS)

    Jun, Lu; Hao, Ding; Hong, Zhang; Ce, Gao Dian

    The present HVAC equipments for the residential buildings in the Hot-summer-and-Cold-winter climate region are still at a high energy consuming level. So that the high efficiency HVAC system is an urgently need for achieving the preset government energy saving goal. With its advantage of highly sanitary, highly comfortable and uniform of temperature field, the hot-water resource floor radiation heating system has been widely accepted. This paper has put forward a new way in air-conditioning, which combines the fresh-air supply unit and such floor radiation system for the dehumidification and cooling in summer or heating in winter. By analyze its advantages and limitations, we found that this so called Cooling/ Heating Floor AC System can improve the IAQ of residential building while keep high efficiency quality. We also recommend a methodology for the HVAC system designing, which will ensure the reduction of energy cost of users.

  1. Establishment of the World Health Organization 2(nd) International Standard for Factor XI, Plasma, Human.

    PubMed

    Wilmot, Helen; Hockley, Jason; Rigsby, Peter; Gray, Elaine

    2017-01-01

    The 1(st) International Standard (IS) for blood coagulation factor XI (FXI), plasma, has been successfully used for potency labeling of FXI therapeutics and for diagnosis of FXI deficiency in patients. With stocks of the 1(st) IS near depletion, a replacement is required. In addition to the functional activity value, assignment of an antigen value to the 2(nd) IS would allow harmonization of antigen assay methods and differentiation of patients who have low functional activity but normal antigen FXI levels from patients who have both low functional and antigen FXI levels. The aims of this study were, therefore, to assign FXI functional activity to the 2(nd) IS for FXI, plasma, and to additionally assign a new analyte, FXI antigen, to the same International Standard. The candidate material was prepared from double-spun, virology negative, normal plasma, which was pooled and filled into siliconized glass ampoules and subsequently freeze-dried. Assignment of the functional activity (FXI:C) value in International Units (IUs) was performed by one-stage clotting assay by 29 laboratories, relative to the 1(st) IS. The overall geometric mean (GM) was 0.71 IU/amp with extremely low inter-laboratory variability (expressed as geometric coefficient of variation) of 1.8%. The antigen value assignment was performed by 11 laboratories and was calculated relative to normal plasma pools, as is customary with new coagulation factor analytes. The amount of antigen present in 1 ml of normal plasma was taken to be 1 U. The overall GM for the antigen assays was 0.78 IU/amp with an inter-laboratory variation of 10%. The candidate (National Institute for Biological Standards and Control code, 15/180) was established by the World Health Organization (WHO) Expert Committee on Biological Standardization in 2016 as the WHO 2(nd) IS for blood coagulation FXI, plasma, with a functional activity value (FXI:C) of 0.71 IU/amp and an antigen value (FXI:Ag) of 0.78 IU/amp.

  2. Establishment of the World Health Organization 2nd International Standard for Factor XI, Plasma, Human

    PubMed Central

    Wilmot, Helen; Hockley, Jason; Rigsby, Peter; Gray, Elaine

    2017-01-01

    The 1st International Standard (IS) for blood coagulation factor XI (FXI), plasma, has been successfully used for potency labeling of FXI therapeutics and for diagnosis of FXI deficiency in patients. With stocks of the 1st IS near depletion, a replacement is required. In addition to the functional activity value, assignment of an antigen value to the 2nd IS would allow harmonization of antigen assay methods and differentiation of patients who have low functional activity but normal antigen FXI levels from patients who have both low functional and antigen FXI levels. The aims of this study were, therefore, to assign FXI functional activity to the 2nd IS for FXI, plasma, and to additionally assign a new analyte, FXI antigen, to the same International Standard. The candidate material was prepared from double-spun, virology negative, normal plasma, which was pooled and filled into siliconized glass ampoules and subsequently freeze-dried. Assignment of the functional activity (FXI:C) value in International Units (IUs) was performed by one-stage clotting assay by 29 laboratories, relative to the 1st IS. The overall geometric mean (GM) was 0.71 IU/amp with extremely low inter-laboratory variability (expressed as geometric coefficient of variation) of 1.8%. The antigen value assignment was performed by 11 laboratories and was calculated relative to normal plasma pools, as is customary with new coagulation factor analytes. The amount of antigen present in 1 ml of normal plasma was taken to be 1 U. The overall GM for the antigen assays was 0.78 IU/amp with an inter-laboratory variation of 10%. The candidate (National Institute for Biological Standards and Control code, 15/180) was established by the World Health Organization (WHO) Expert Committee on Biological Standardization in 2016 as the WHO 2nd IS for blood coagulation FXI, plasma, with a functional activity value (FXI:C) of 0.71 IU/amp and an antigen value (FXI:Ag) of 0.78 IU/amp. PMID:28373973

  3. 16. STATIC TEST TOWER REMOVABLE FLOOR LEVEL VIEW OF FLOOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    16. STATIC TEST TOWER REMOVABLE FLOOR LEVEL VIEW OF FLOOR THAT FOLDS BACK TO ALLOW ROCKET PLACEMENT. - Marshall Space Flight Center, Saturn Propulsion & Structural Test Facility, East Test Area, Huntsville, Madison County, AL

  4. 16. SANDSORTING BUILDING, FIRST FLOOR, MEZZANINE ON LEFT (BELOW FLOOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    16. SAND-SORTING BUILDING, FIRST FLOOR, MEZZANINE ON LEFT (BELOW FLOOR ARE CONCRETE AND STORAGE BINS), LOOKING NORTH - Mill "C" Complex, Sand-Sorting Building, South of Dee Bennet Road, near Illinois River, Ottawa, La Salle County, IL

  5. 45. SECOND FLOOR WAREHOUSE, WITH CRANE AND WOODEN BLOCK FLOORING. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    45. SECOND FLOOR WAREHOUSE, WITH CRANE AND WOODEN BLOCK FLOORING. VIEW TO NORTH. - Ford Motor Company Long Beach Assembly Plant, Assembly Building, 700 Henry Ford Avenue, Long Beach, Los Angeles County, CA

  6. Two and Three Bedroom Units: First Floor Plan, Second Floor ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Two and Three Bedroom Units: First Floor Plan, Second Floor Plan, South Elevation (As Built), North Elevation (As Built), East Elevation (As Built), East Elevation (Existing), North Elevation (Existing) - Aluminum City Terrace, East Hill Drive, New Kensington, Westmoreland County, PA

  7. Simultaneous Vibrant Soundbridge Implantation and 2nd Stage Auricular Reconstruction for Microtia with Aural Atresia

    PubMed Central

    Lim, Lynne Hsueh Yee; Xiang, Ling; del Prado, Jocelynne; Ee Chin, Ling; Beltrame, Millo Achille

    2011-01-01

    Aural atresia and severe microtia are associated malformations that result in problems with hearing and cosmesis, associated speech and language difficulties and diminished self-esteem. In cases where middle ear ossiculoplasty and aural atresia canalplasty are expected to give poor hearing outcomes that would eventually require the use of hearing aids, bone anchored hearing aids or active middle ear implants may be better options. This case report describes a simultaneous Vibrant Soundbridge implantation and 2nd stage auricular reconstruction with rib graft cartilage for an 11-year-old boy with grade III microtia and aural atresia 8 months after the 1st stage reconstruction. Audiometric results of the Vibrant Soundbridge aided ear were comparable to that of the contralateral hearing aid aided ear. PMID:26557321

  8. A Perpendicular Biased 2nd Harmonic Cavity for the Fermilab Booster

    SciTech Connect

    Tan, C. Y.; Dey, J.; Madrak, R. L.; Pellico, W.; Romanov, G.; Sun, D.; Terechkine, I.

    2015-07-13

    A perpendicular biased 2nd harmonic cavity is currently being designed for the Fermilab Booster. Its purpose cavity is to flatten the bucket at injection and thus change the longitudinal beam distribution so that space charge effects are decreased. It can also with transition crossing. The reason for the choice of perpendicular biasing over parallel biasing is that the Q of the cavity is much higher and thus allows the accelerating voltage to be a factor of two higher than a similar parallel biased cavity. This cavity will also provide a higher accelerating voltage per meter than the present folded transmission line cavity. However, this type of cavity presents technical challenges that need to be addressed. The two major issues are cooling of the garnet material from the effects of the RF and the cavity itself from eddy current heating because of the 15 Hz bias field ramp. This paper will address the technical challenge of preventing the garnet from overheating.

  9. Preliminary GPS orbit combination results of the IGS 2nd reprocessing campaign

    NASA Astrophysics Data System (ADS)

    Choi, Kevin

    2015-04-01

    International GNSS Service (IGS) has contributed to the International Terrestrial Reference Frame by reprocessing historic GPS network data and submitting Terrestrial Reference Frame solutions and Earth Rotation Parameters. For the 2nd reprocessing campaign, Analysis Centers (ACs) used up to 21 years of GPS observation data with daily integrations. IERS2010 conventions are applied to model the physical effects of the Earth. Total eight ACs have participated (7 Global solutions, and 2 Tide Gauge solutions) by reprocessing entire time series in a consistent way using the latest models and methodology. IGS combined daily SINEX TRF and EOP combinations have already been submitted to the IERS for ITRF2013. This presentation mainly focuses on the preliminary quality assessment of the reprocessed AC orbits. Quality of the orbit products are examined by examining the repeatability between daily AC satellite ephemeris. Power spectral analysis shows the background noise characteristics of each AC products, and its periodic behaviors.

  10. Automated CFD Database Generation for a 2nd Generation Glide-Back-Booster

    NASA Technical Reports Server (NTRS)

    Chaderjian, Neal M.; Rogers, Stuart E.; Aftosmis, Michael J.; Pandya, Shishir A.; Ahmad, Jasim U.; Tejmil, Edward

    2003-01-01

    A new software tool, AeroDB, is used to compute thousands of Euler and Navier-Stokes solutions for a 2nd generation glide-back booster in one week. The solution process exploits a common job-submission grid environment using 13 computers located at 4 different geographical sites. Process automation and web-based access to the database greatly reduces the user workload, removing much of the tedium and tendency for user input errors. The database consists of forces, moments, and solution files obtained by varying the Mach number, angle of attack, and sideslip angle. The forces and moments compare well with experimental data. Stability derivatives are also computed using a monotone cubic spline procedure. Flow visualization and three-dimensional surface plots are used to interpret and characterize the nature of computed flow fields.

  11. Computation of equivalent poles placement for class of 2nd order discrete bilinear systems

    NASA Astrophysics Data System (ADS)

    Gadek, Lukasz; Koszalka, Leszek; Burnham, Keith

    2015-11-01

    This paper introduces an adaptation of the classical linear control theory representation of zeros, poles and gain into a bilinear approach. The placement of poles at the complex plane is a complete description of plants dynamics; hence it is a convenient form from which calculation of various properties, e.g. rise time, settling time, is plausible. Such technique can be adjusted into the bilinear structure if poles of a quasi-linear representation (linear with respect to input) are concerned. The research outcomes with conclusion on the equivalent poles displacement and generalized rules for a 2nd order bilinear system equivalent poles input dependent loci. The proposed approach seems to be promising, as simplification of design and identification of a bilinear system increases transparency during modelling and control in practical applications and hence it may be followed by applicability of such structure in common industrial problems.

  12. Improvement of a plasma uniformity of the 2nd ion source of KSTAR neutral beam injector

    SciTech Connect

    Jeong, S. H. Kim, T. S.; Lee, K. W.; Chang, D. H.; In, S. R.; Bae, Y. S.

    2014-02-15

    The 2nd ion source of KSTAR (Korea Superconducting Tokamak Advanced Research) NBI (Neutral Beam Injector) had been developed and operated since last year. A calorimetric analysis revealed that the heat load of the back plate of the ion source is relatively higher than that of the 1st ion source of KSTAR NBI. The spatial plasma uniformity of the ion source is not good. Therefore, we intended to identify factors affecting the uniformity of a plasma density and improve it. We estimated the effects of a direction of filament current and a magnetic field configuration of the plasma generator on the plasma uniformity. We also verified that the operation conditions of an ion source could change a uniformity of the plasma density of an ion source.

  13. Simultaneous Vibrant Soundbridge Implantation and 2nd Stage Auricular Reconstruction for Microtia with Aural Atresia.

    PubMed

    Lim, Lynne Hsueh Yee; Xiang, Ling; Del Prado, Jocelynne; Ee Chin, Ling; Beltrame, Millo Achille

    2011-07-01

    Aural atresia and severe microtia are associated malformations that result in problems with hearing and cosmesis, associated speech and language difficulties and diminished self-esteem. In cases where middle ear ossiculoplasty and aural atresia canalplasty are expected to give poor hearing outcomes that would eventually require the use of hearing aids, bone anchored hearing aids or active middle ear implants may be better options. This case report describes a simultaneous Vibrant Soundbridge implantation and 2(nd) stage auricular reconstruction with rib graft cartilage for an 11-year-old boy with grade III microtia and aural atresia 8 months after the 1(st) stage reconstruction. Audiometric results of the Vibrant Soundbridge aided ear were comparable to that of the contralateral hearing aid aided ear.

  14. The New 2nd-Generation SRF R&D Facility at Jefferson Lab: TEDF

    SciTech Connect

    Reece, Charles E.; Reilly, Anthony V.

    2012-09-01

    The US Department of Energy has funded a near-complete renovation of the SRF-based accelerator research and development facilities at Jefferson Lab. The project to accomplish this, the Technical and Engineering Development Facility (TEDF) Project has completed the first of two phases. An entirely new 3,100 m{sup 2} purpose-built SRF technical work facility has been constructed and was occupied in summer of 2012. All SRF work processes with the exception of cryogenic testing have been relocated into the new building. All cavity fabrication, processing, thermal treatment, chemistry, cleaning, and assembly work is collected conveniently into a new LEED-certified building. An innovatively designed 800 m2 cleanroom/chemroom suite provides long-term flexibility for support of multiple R&D and construction projects as well as continued process evolution. The characteristics of this first 2nd-generation SRF facility are described.

  15. Enabling the 2nd Generation in Space: Building Blocks for Large Scale Space Endeavours

    NASA Astrophysics Data System (ADS)

    Barnhardt, D.; Garretson, P.; Will, P.

    Today the world operates within a "first generation" space industrial enterprise, i.e. all industry is on Earth, all value from space is from bits (data essentially), and the focus is Earth-centric, with very limited parts of our population and industry participating in space. We are limited in access, manoeuvring, on-orbit servicing, in-space power, in-space manufacturing and assembly. The transition to a "Starship culture" requires the Earth to progress to a "second generation" space industrial base, which implies the need to expand the economic sphere of activity of mankind outside of an Earth-centric zone and into CIS-lunar space and beyond, with an equal ability to tap the indigenous resources in space (energy, location, materials) that will contribute to an expanding space economy. Right now, there is no comfortable place for space applications that are not discovery science, exploration, military, or established earth bound services. For the most part, space applications leave out -- or at least leave nebulous, unconsolidated, and without a critical mass -- programs and development efforts for infrastructure, industrialization, space resources (survey and process maturation), non-traditional and persistent security situational awareness, and global utilities -- all of which, to a far greater extent than a discovery and exploration program, may help determine the elements of a 2nd generation space capability. We propose a focus to seed the pre-competitive research that will enable global industry to develop the necessary competencies that we currently lack to build large scale space structures on-orbit, that in turn would lay the foundation for long duration spacecraft travel (i.e. key technologies in access, manoeuvrability, etc.). This paper will posit a vision-to-reality for a step wise approach to the types of activities the US and global space providers could embark upon to lay the foundation for the 2nd generation of Earth in space.

  16. Chronic pelvic floor dysfunction.

    PubMed

    Hartmann, Dee; Sarton, Julie

    2014-10-01

    The successful treatment of women with vestibulodynia and its associated chronic pelvic floor dysfunctions requires interventions that address a broad field of possible pain contributors. Pelvic floor muscle hypertonicity was implicated in the mid-1990s as a trigger of major chronic vulvar pain. Painful bladder syndrome, irritable bowel syndrome, fibromyalgia, and temporomandibular jaw disorder are known common comorbidities that can cause a host of associated muscular, visceral, bony, and fascial dysfunctions. It appears that normalizing all of those disorders plays a pivotal role in reducing complaints of chronic vulvar pain and sexual dysfunction. Though the studies have yet to prove a specific protocol, physical therapists trained in pelvic dysfunction are reporting success with restoring tissue normalcy and reducing vulvar and sexual pain. A review of pelvic anatomy and common findings are presented along with suggested physical therapy management.

  17. Floor of Hellas Basin

    NASA Technical Reports Server (NTRS)

    2002-01-01

    [figure removed for brevity, see original site]

    With a diameter of roughly 2000 km and a depth of over 7 km, the Hellas Basin is the largest impact feature on Mars. Because of its great depth, there is significantly more atmosphere to peer through in order to see its floor, reducing the quality of the images taken from orbit. This THEMIS image straddles a scarp between the Hellas floor and an accumulation of material at least a half kilometer thick that covers much of the floor. The southern half of the image contains some of this material. Strange ovoid landforms are present here that give the appearance of flow. It is possible that water ice or even liquid water was present in the deposits and somehow responsible for the observed landscape. The floor of Hellas remains a poorly understood portion of the planet that should benefit from the analysis of new THEMIS data.

    Note: this THEMIS visual image has not been radiometrically nor geometrically calibrated for this preliminary release. An empirical correction has been performed to remove instrumental effects. A linear shift has been applied in the cross-track and down-track direction to approximate spacecraft and planetary motion. Fully calibrated and geometrically projected images will be released through the Planetary Data System in accordance with Project policies at a later time.

    NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The Thermal Emission Imaging System (THEMIS) was developed by Arizona State University, Tempe, in collaboration with Raytheon Santa Barbara Remote Sensing. The THEMIS investigation is led by Dr. Philip Christensen at Arizona State University. Lockheed Martin Astronautics, Denver, is the prime contractor for the Odyssey project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in

  18. Modular Flooring System

    NASA Technical Reports Server (NTRS)

    Thate, Robert

    2012-01-01

    The modular flooring system (MFS) was developed to provide a portable, modular, durable carpeting solution for NASA fs Robotics Alliance Project fs (RAP) outreach efforts. It was also designed to improve and replace a modular flooring system that was too heavy for safe use and transportation. The MFS was developed for use as the flooring for various robotics competitions that RAP utilizes to meet its mission goals. One of these competitions, the FIRST Robotics Competition (FRC), currently uses two massive rolls of broadloom carpet for the foundation of the arena in which the robots are contained during the competition. The area of the arena is approximately 30 by 72 ft (approximately 9 by 22 m). This carpet is very cumbersome and requires large-capacity vehicles, and handling equipment and personnel to transport and deploy. The broadloom carpet sustains severe abuse from the robots during a regular three-day competition, and as a result, the carpet is not used again for competition. Similarly, broadloom carpets used for trade shows at convention centers around the world are typically discarded after only one use. This innovation provides a green solution to this wasteful practice. Each of the flooring modules in the previous system weighed 44 lb (.20 kg). The improvements in the overall design of the system reduce the weight of each module by approximately 22 lb (.10 kg) (50 %), and utilize an improved "module-to-module" connection method that is superior to the previous system. The MFS comprises 4-by-4-ft (.1.2-by- 1.2-m) carpet module assemblies that utilize commercially available carpet tiles that are bonded to a lightweight substrate. The substrate surface opposite from the carpeted surface has a module-to-module connecting interface that allows for the modules to be connected, one to the other, as the modules are constructed. This connection is hidden underneath the modules, creating a smooth, co-planar flooring surface. The modules are stacked and strapped

  19. Conference Proceedings: 2nd European Conference of Rehabilitation International; Disability in the Family. (Brighton, England, September 18-21, 1978)

    ERIC Educational Resources Information Center

    Royal Association for Disability and Rehabilitation, London (England).

    The conference proceedings of the 2nd European Conference of Rehabilitation International (1978) on the theme disability in the family contains the agenda and approximately 80 papers. National presentations consider the theme in papers by representatives of Finland, Hungary, Belgium, The Netherlands, Portugal, Hong Kong, India, The German…

  20. Curriculum on the Edge of Survival: How Schools Fail to Prepare Students for Membership in a Democracy. 2nd Edition

    ERIC Educational Resources Information Center

    Heller, Daniel

    2012-01-01

    Typically, school curriculum has been viewed through the lens of preparation for the workplace or higher education, both worthy objectives. However, this is not the only lens, and perhaps not even the most powerful one to use, if the goal is to optimize the educational system. "Curriculum on the Edge of Survival, 2nd Edition," attempts to define…

  1. Comparative analysis of 1st, 2nd, and 4th year MD students' attitudes toward Complementary Alternative Medicine (CAM)

    PubMed Central

    Riccard, Christopher P; Skelton, Michele

    2008-01-01

    Background To identify and report the attitudes and beliefs of 1st, 2nd, and 4th year medical students toward complementary alternative medicine (CAM). Methods The previously validated and reliability tested CHBQ was administered to medical students attending the University of South Florida School of Medicine. Results Significant changes were found between both 1st (46.0 ± 7.7) and 4th (37.8 ± 15.7) year students and 2nd (48.3 ± 7.8) and 4th (37.8 ± 15.7) year students. No significant difference was found between 1st (46.0 ± 7.7) and 2nd (48.3 ± 7.8) year students. When comparing scores based on gender, a significant difference was present between males (41.2 ± 12.2) and females (46.1 ± 11.0). Conclusion CHBQ scores were significantly more positive in both 1st and 2nd year medical students in comparison with 4th year student's scores. These findings suggest that as student exposure to allopathic techniques and procedures increases during the last year of medical school, their attitudes toward CAM decrease. Females were also significantly more likely to have stronger positive attitudes toward CAM than males, though both genders represented an overall positive attitude toward CAM. PMID:18799010

  2. The Hyphen as a Syllabification Cue in Reading Bisyllabic and Multisyllabic Words among Finnish 1st and 2nd Graders

    ERIC Educational Resources Information Center

    Häikiö, Tuomo; Bertram, Raymond; Hyönä, Jukka

    2016-01-01

    Finnish ABC books present words with hyphens inserted at syllable boundaries. Syllabification by hyphens is abandoned in the 2nd grade for bisyllabic words, but continues for words with three or more syllables. The current eye movement study investigated how and to what extent syllable hyphens in bisyllabic ("kah-vi" "cof-fee")…

  3. Give It a Shot! Toolkit for Nurses and Other Immunization Champions Working with Secondary Schools. 2nd Edition

    ERIC Educational Resources Information Center

    Boyer-Chu, Lynda; Wooley, Susan F.

    2008-01-01

    Adolescent immunization saves lives--but promoting immunization takes time and thought, and today's nurses and other health advocates are faced with a host of ever-expanding responsibilities in a time of reduced budgets and staff. This toolkit is thus structured as an easy and reliable resource. This 2nd edition contains: (1) a 64-page manual;…

  4. International Conference on Hyperbolic Problems (2nd). Theory, Numerical Methods and Applications, 14-18 March 1988

    DTIC Science & Technology

    1988-01-01

    SOlution of’ th icai Ele quations. Proceedings of (lie 2nd European Conference on Multigrid 3. - --- AND B. KoRSN (1997). A Non-linear Afiultq,’rid...of Aerospace Engineering Indian Institute of Science Bangalore, India A new upwind scheme called Kinetic Flux Vector Splitting (KFVS) method has been

  5. Perspectives on Art Therapy: The Proceedings of the Pittsburgh Conference on Art Therapy (2nd, Pittsburgh, Pennsylvania, May 20, 1977).

    ERIC Educational Resources Information Center

    Roth, Ellen A., Ed.; Rubin, Judith A., Ed.

    The proceedings of the 2nd annual Pittsburgh Conference on Art Therapy (with handicapped persons) consists of 44 items including full length papers, summaries of previously published papers, descriptions of workshops, and a limited number of abstracts (submitted by those who chose not to present a paper or workshop description). The papers are…

  6. Observation in a School without Walls: Peer Observation of Teaching in a 2nd-12th Grade Independent School

    ERIC Educational Resources Information Center

    Salvador, Josephine

    2012-01-01

    What happens when teachers start to observe each other's classes? How do teachers make meaning of observing and being observed? What effects, if any, does requiring peer observation have on the teaching community? This research explores these questions in a qualitative study of peer observation of teaching (POT) in the 2nd-12th grades of an…

  7. Efficient Simulation of Wing Modal Response: Application of 2nd Order Shape Sensitivities and Neural Networks

    NASA Technical Reports Server (NTRS)

    Kapania, Rakesh K.; Liu, Youhua

    2000-01-01

    At the preliminary design stage of a wing structure, an efficient simulation, one needing little computation but yielding adequately accurate results for various response quantities, is essential in the search of optimal design in a vast design space. In the present paper, methods of using sensitivities up to 2nd order, and direct application of neural networks are explored. The example problem is how to decide the natural frequencies of a wing given the shape variables of the structure. It is shown that when sensitivities cannot be obtained analytically, the finite difference approach is usually more reliable than a semi-analytical approach provided an appropriate step size is used. The use of second order sensitivities is proved of being able to yield much better results than the case where only the first order sensitivities are used. When neural networks are trained to relate the wing natural frequencies to the shape variables, a negligible computation effort is needed to accurately determine the natural frequencies of a new design.

  8. Wind-US Results for the AIAA 2nd Propulsion Aerodynamics Workshop

    NASA Technical Reports Server (NTRS)

    Dippold, Vance III; Foster, Lancert; Mankbadi, Mina

    2014-01-01

    This presentation contains Wind-US results presented at the 2nd Propulsion Aerodynamics Workshop. The workshop was organized by the American Institute of Aeronautics and Astronautics, Air Breathing Propulsion Systems Integration Technical Committee with the purpose of assessing the accuracy of computational fluid dynamics for air breathing propulsion applications. Attendees included representatives from government, industry, academia, and commercial software companies. Participants were encouraged to explore and discuss all aspects of the simulation process including the effects of mesh type and refinement, solver numerical schemes, and turbulence modeling. The first set of challenge cases involved computing the thrust and discharge coefficients for a 25deg conical nozzle for a range of nozzle pressure ratios between 1.4 and 7.0. Participants were also asked to simulate two cases in which the 25deg conical nozzle was bifurcated by a solid plate, resulting in vortex shedding (NPR=1.6) and shifted plume shock (NPR=4.0). A second set of nozzle cases involved computing the discharge and thrust coefficients for a convergent dual stream nozzle for a range of subsonic nozzle pressure ratios. The workshop committee also compared the plume mixing of these cases across various codes and models. The final test case was a serpentine inlet diffuser with an outlet to inlet area ratio of 1.52 and an offset of 1.34 times the inlet diameter. Boundary layer profiles, wall static pressure, and total pressure at downstream rake locations were examined.

  9. Plasmodium falciparum malaria in 1(st)-2(nd) century CE southern Italy.

    PubMed

    Marciniak, Stephanie; Prowse, Tracy L; Herring, D Ann; Klunk, Jennifer; Kuch, Melanie; Duggan, Ana T; Bondioli, Luca; Holmes, Edward C; Poinar, Hendrik N

    2016-12-05

    The historical record attests to the devastation malaria exacted on ancient civilizations, particularly the Roman Empire [1]. However, evidence for the presence of malaria during the Imperial period in Italy (1st-5th century CE) is based on indirect sources, such as historical, epigraphic, or skeletal evidence. Although these sources are crucial for revealing the context of this disease, they cannot establish the causative species of Plasmodium. Importantly, definitive evidence for the presence of malaria is now possible through the implementation of ancient DNA technology. As malaria is presumed to have been at its zenith during the Imperial period [1], we selected first or second molars from 58 adults from three cemeteries from this time: Isola Sacra (associated with Portus Romae, 1st-3rd century CE), Velia (1st-2nd century CE), and Vagnari (1st-4th century CE). We performed hybridization capture using baits designed from the mitochondrial (mtDNA) genomes of Plasmodium spp. on a prioritized subset of 11 adults (informed by metagenomic sequencing). The mtDNA sequences generated provided compelling phylogenetic evidence for the presence of P. falciparum in two individuals. This is the first genomic data directly implicating P. falciparum in Imperial period southern Italy in adults.

  10. Minimal Clinically Important Difference on Parkinson's Disease Sleep Scale 2nd Version

    PubMed Central

    Horváth, Krisztina; Aschermann, Zsuzsanna; Ács, Péter; Deli, Gabriella; Janszky, József; Komoly, Sámuel; Karádi, Kázmér; Kovács, Márton; Makkos, Attila; Faludi, Béla; Kovács, Norbert

    2015-01-01

    Background and Aims. The aim of the present study was to determine the estimates of minimal clinically important difference for Parkinson's Disease Sleep Scale 2nd version (PDSS-2) total score and dimensions. Methods. The subject population consisted of 413 PD patients. At baseline, MDS-UPDRS, Hoehn-Yahr Scale, Mattis Dementia Rating Scale, and PDSS-2 were assessed. Nine months later the PDSS-2 was reevaluated with the Patient-Reported Global Impression Improvement Scale. Both anchor-based techniques (within patients' score change method and sensitivity- and specificity-based method by receiver operating characteristic analysis) and distribution-based approaches (effect size calculations) were utilized to determine the magnitude of minimal clinically important difference. Results. According to our results, any improvements larger than −3.44 points or worsening larger than 2.07 points can represent clinically important changes for the patients. These thresholds have the effect size of 0.21 and −0.21, respectively. Conclusions. Minimal clinically important differences are the smallest change of scores that are subjectively meaningful to patients. Studies using the PDSS-2 as outcome measure should utilize the threshold of −3.44 points for detecting improvement or the threshold of 2.07 points for observing worsening. PMID:26539303

  11. Evaluation of a hand washing program for 2nd-graders.

    PubMed

    Tousman, Stuart; Arnold, Dani; Helland, Wealtha; Roth, Ruth; Heshelman, Nannatte; Castaneda, Oralia; Fischer, Emily; O'Neil, Kristen; Bileto, Stephanie

    2007-12-01

    The purpose of this project was to determine if a multiple-week learner-centered hand washing program could improve hand hygiene behaviors of 2nd-graders in a northern Illinois public school system. Volunteers from the Rockford Hand Washing Coalition went into 19 different classrooms for 4 consecutive weeks and taught a learner-centered program. The program consisted of interactive class discussions and activities using GlitterBug training devices and agar plate materials. A one-factor repeated measure analysis of variance indicated a statistically significant 34% decrease in the absenteeism rate for students in the intervention group. Chi-square analyses on agar plate data indicated that students had cleaner hands after washing. Qualitative data from parents and teachers indicated that a majority of the students were engaging in hand-washing behavior. These results indicate that integrating a learner-centered interactive program in a multiple-week structure can lead to improvement in hand hygiene behavior.

  12. Introduction of the 2nd Phase of the Integrated Hydrologic Model Intercomparison Project

    NASA Astrophysics Data System (ADS)

    Kollet, Stefan; Maxwell, Reed; Dages, Cecile; Mouche, Emmanuel; Mugler, Claude; Paniconi, Claudio; Park, Young-Jin; Putti, Mario; Shen, Chaopeng; Stisen, Simon; Sudicky, Edward; Sulis, Mauro; Ji, Xinye

    2015-04-01

    The 2nd Phase of the Integrated Hydrologic Model Intercomparison Project commenced in June 2013 with a workshop at Bonn University funded by the German Science Foundation and US National Science Foundation. Three test cases were defined and compared that are available online at www.hpsc-terrsys.de including a tilted v-catchment case; a case called superslab based on multiple slab-heterogeneities in the hydraulic conductivity along a hillslope; and the Borden site case, based on a published field experiment. The goal of this phase is to further interrogate the coupling of surface-subsurface flow implemented in various integrated hydrologic models; and to understand and quantify the impact of differences in the conceptual and technical implementations on the simulation results, which may constitute an additional source of uncertainty. The focus has been broadened considerably including e.g. saturated and unsaturated subsurface storages, saturated surface area, ponded surface storage in addition to discharge, and pressure/saturation profiles and cross-sections. Here, first results are presented and discussed demonstrating the conceptual and technical challenges in implementing essentially the same governing equations describing highly non-linear moisture redistribution processes and surface-groundwater interactions.

  13. Studies with Ferrous Sulfamate and Alternate Reductants for 2nd Uranium Cycle

    SciTech Connect

    Crowder, M.L.

    2003-01-15

    A wide range of miniature mixer-settler tests were conducted to determine the source of iron and sulfur contamination in the uranium product stream (''1EU'') of H Canyon's 2nd Uranium Cycle. The problem was reproduced on the laboratory scale mixer-settlers by changing the feed location of ferrous sulfamate from stage D4 to stage D1. Other process variables effected no change. It was later determined that ferrous sulfamate (FS) solids had plugged the FS line to stage D4, causing FS to backup a ventline and enter the Canyon process at stage D1. Pluggage was almost certainly due to precipitation of FS solids during extended process downtime. During the search for the root cause, tests showed that FS solids were quite small (1-10 mm), and a portion of them could bypass the current Canyon prefilter (3-mm). Also, additional tests were done to find an alternate means of reducing and thereby removing plutonium and neptunium from the uranium product. These tests showed that FS was a more effective reductant than either ascorbic acid or a hydroxylamine nitrate (HAN) / dilute FS combination.

  14. Crater Wall and Floor

    NASA Technical Reports Server (NTRS)

    2003-01-01

    [figure removed for brevity, see original site]

    3D Projection onto MOLA data [figure removed for brevity, see original site]

    The impact crater observed in this THEMIS image taken in Terra Cimmeria suggests sediments have filled the crater due to the flat and smooth nature of the floor compared to rougher surfaces at higher elevations. The abundance of several smaller impact craters on the floor of the larger crater indicate however that the flat surface has been exposed for an extended period of time. The smooth surface of the crater floor and rougher surfaces at higher elevations are observed in the 3-D THEMIS image that is draped over MOLA topography (2X vertical exaggeration).

    Note: this THEMIS visual image has not been radiometrically nor geometrically calibrated for this preliminary release. An empirical correction has been performed to remove instrumental effects. A linear shift has been applied in the cross-track and down-track direction to approximate spacecraft and planetary motion. Fully calibrated and geometrically projected images will be released through the Planetary Data System in accordance with Project policies at a later time.

    NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The Thermal Emission Imaging System (THEMIS) was developed by Arizona State University, Tempe, in collaboration with Raytheon Santa Barbara Remote Sensing. The THEMIS investigation is led by Dr. Philip Christensen at Arizona State University. Lockheed Martin Astronautics, Denver, is the prime contractor for the Odyssey project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena.

    Image information: VIS instrument. Latitude -22.9, Longitude 155.7 East (204.3 West). 19 meter/pixel resolution.

  15. The adenovirus type 2-simian virus 40 hybrid virus Ad2+ND4 requires deletion variants to grow in monkey cells.

    PubMed Central

    Lewis, A M; Westphal, H

    1983-01-01

    The Ad2+ND4 virus is an adenovirus type 2 (Ad2)-simian virus 40 (SV40) recombination. The Ad2 genome of this recombinant has a rearrangement within early region 3; Ad2 DNA sequences between map positions 81.3 and 85.5 have been deleted, and the SV40 DNA sequences between map positions 0.11 and 0.626 have been inserted into the deletion in an 81.3-0.626 orientation. Nonhybrid Ad2 is defective in monkey cells; however, the Ad2+ND4 virus can replicate in monkey cells due to the expression of the SV40-enhancing function encoded by the DNA insert. Stocks of the Ad2+ND4 hybrid were produced in primary monkey cells by using the progeny of a three-step plaque purification procedure and were considered to be homogeneous populations of Ad2+ND4 virions because they induced plaques in primary monkey cells by first-order kinetics. By studying the kinetics of plaque induction in continuous lines (BSC-1 and CV-1) of monkey cells, we have found that stocks (prepared with virions before and after plaque purification) of Ad2+ND4 are actually heterogeneous populations of Ad2+ND4 virions and Ad2+ND4 deletion variants that lack SV40 and frequently Ad2 DNA sequences at the left Ad2-SV40 junction. Due to the defectiveness of the Ad2+ND4 virus, the production of progeny in BSC-1 and CV-1 cells requires complementation between the Ad2+ND4 genome and the genome of an Ad2+ND4 deletion variant. Since the deletion variants that have been obtained from Ad2+ND4 stocks do not express the SV40-enhancing function in that they cannot produce progeny in monkey cells, we conclude that they are providing an Ad2 component that is essential for the production of Ad2+ND4 progeny. These data imply that the Ad2+ND4 virus is incapable of replicating in singly infected primary monkey cells without generating deletion variants that are missing various amounts of DNA around the left Ad2-SV40 junction in the hybrid genome. As the deletion variants that arise from the Ad2+ND4 virus are created by nonhomologous

  16. [Pelvic floor muscle training and pelvic floor disorders in women].

    PubMed

    Thubert, T; Bakker, E; Fritel, X

    2015-05-01

    Our goal is to provide an update on the results of pelvic floor rehabilitation in the treatment of urinary incontinence and genital prolapse symptoms. Pelvic floor muscle training allows a reduction of urinary incontinence symptoms. Pelvic floor muscle contractions supervised by a healthcare professional allow cure in half cases of stress urinary incontinence. Viewing this contraction through biofeedback improves outcomes, but this effect could also be due by a more intensive and prolonged program with the physiotherapist. The place of electrostimulation remains unclear. The results obtained with vaginal cones are similar to pelvic floor muscle training with or without biofeedback or electrostimulation. It is not known whether pelvic floor muscle training has an effect after one year. In case of stress urinary incontinence, supervised pelvic floor muscle training avoids surgery in half of the cases at 1-year follow-up. Pelvic floor muscle training is the first-line treatment of post-partum urinary incontinence. Its preventive effect is uncertain. Pelvic floor muscle training may reduce the symptoms associated with genital prolapse. In conclusion, pelvic floor rehabilitation supervised by a physiotherapist is an effective short-term treatment to reduce the symptoms of urinary incontinence or pelvic organ prolapse.

  17. Candor Chasma Floor

    NASA Technical Reports Server (NTRS)

    2005-01-01

    [figure removed for brevity, see original site] Context image for PIA03080 Candor Chasma Floor

    This VIS image shows part of the layered and wind sculpted deposit that occurs on the floor of Candor Chasma.

    Image information: VIS instrument. Latitude 6.6S, Longitude 284.4E. 17 meter/pixel resolution.

    Note: this THEMIS visual image has not been radiometrically nor geometrically calibrated for this preliminary release. An empirical correction has been performed to remove instrumental effects. A linear shift has been applied in the cross-track and down-track direction to approximate spacecraft and planetary motion. Fully calibrated and geometrically projected images will be released through the Planetary Data System in accordance with Project policies at a later time.

    NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The Thermal Emission Imaging System (THEMIS) was developed by Arizona State University, Tempe, in collaboration with Raytheon Santa Barbara Remote Sensing. The THEMIS investigation is led by Dr. Philip Christensen at Arizona State University. Lockheed Martin Astronautics, Denver, is the prime contractor for the Odyssey project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena.

  18. Canyon Floor Deposits

    NASA Technical Reports Server (NTRS)

    2005-01-01

    [figure removed for brevity, see original site] Context image for PIA03598 Canyon Floor Deposits

    The layered and wind eroded deposits seen in this VIS image occur on the floor of Chandor Chasma.

    Image information: VIS instrument. Latitude 5.2S, Longitude 283.4E. 17 meter/pixel resolution.

    Note: this THEMIS visual image has not been radiometrically nor geometrically calibrated for this preliminary release. An empirical correction has been performed to remove instrumental effects. A linear shift has been applied in the cross-track and down-track direction to approximate spacecraft and planetary motion. Fully calibrated and geometrically projected images will be released through the Planetary Data System in accordance with Project policies at a later time.

    NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The Thermal Emission Imaging System (THEMIS) was developed by Arizona State University, Tempe, in collaboration with Raytheon Santa Barbara Remote Sensing. The THEMIS investigation is led by Dr. Philip Christensen at Arizona State University. Lockheed Martin Astronautics, Denver, is the prime contractor for the Odyssey project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena.

  19. Spallanzani Cr. Floor

    NASA Technical Reports Server (NTRS)

    2005-01-01

    [figure removed for brevity, see original site] Context image for PIA03632 Spallanzani Cr. Floor

    This image was taken by one of the Mars Student Imaging Project (MSIP) teams. Their target is the unusual floor deposits in Spallanzani Crater. The wind may have affected the surface of the layered deposit. Small dunes have formed near the southern margin.

    Image information: VIS instrument. Latitude 57.9S, Longitude 86.5E. 17 meter/pixel resolution.

    Note: this THEMIS visual image has not been radiometrically nor geometrically calibrated for this preliminary release. An empirical correction has been performed to remove instrumental effects. A linear shift has been applied in the cross-track and down-track direction to approximate spacecraft and planetary motion. Fully calibrated and geometrically projected images will be released through the Planetary Data System in accordance with Project policies at a later time.

    NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The Thermal Emission Imaging System (THEMIS) was developed by Arizona State University, Tempe, in collaboration with Raytheon Santa Barbara Remote Sensing. The THEMIS investigation is led by Dr. Philip Christensen at Arizona State University. Lockheed Martin Astronautics, Denver, is the prime contractor for the Odyssey project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena.

  20. Floor of Juventae Chasma

    NASA Technical Reports Server (NTRS)

    2002-01-01

    (Released 30 May 2002) Juventae Chasma is an enormous box canyon (250 km X 100 km) which opens to the north and forms the outflow channel Maja Vallis. Most Martian outflow channels such as Maja, Kasei, and Ares Valles begin at point sources such as box canyons and chaotic terrain and then flow unconfined into a basin region. This image captures a portion of the western floor of Juventae Chasma and shows a wide variety of landforms. Conical hills, mesas, buttes and plateaus of layered material dominate this scene and seem to be 'swimming' in vast sand sheets. The conical hills have a spur and gully topography associated with them while the flat topped buttes and mesas do not. This may be indicative of different materials that compose each of these landforms or it could be that the flat-topped layer has been completely eroded off of the conical hills thereby exposing a different rock type. Both the conical hills and flat-topped buttes and mesas have extensive scree slopes (heaps of eroded rock and debris). Ripples, which are inferred to be dunes, can also be seen amongst the hills. No impact craters can be seen in this image, indicating that the erosion and transport of material down the canyon wall and across the floor is occurring at a relatively rapid rate, so that any craters that form are rapidly buried or eroded.

  1. The Ratio of 2nd to 4th Digit Length in Korean Alcohol-dependent Patients

    PubMed Central

    Han, Changwoo; Bae, Hwallip; Lee, Yu-Sang; Won, Sung-Doo; Kim, Dai Jin

    2016-01-01

    Objective The ratio of 2nd to 4th digit length (2D:4D) is a sexually dimorphic trait. Men have a relatively shorter second digit than fourth digit. This ratio is thought to be influenced by higher prenatal testosterone level or greater sensitivity to androgen. The purpose of this study is to investigate the relationship between alcohol dependence and 2D:4D in a Korean sample and whether 2D:4D can be a biologic marker in alcohol dependence. Methods In this study, we recruited 87 male patients with alcohol dependence from the alcohol center of one psychiatric hospital and 52 healthy male volunteers who were all employees in the same hospital as controls. We captured images of the right and left hands of patients and controls using a scanner and extracted data with a graphics program. We measured the 2D:4D of each hand and compared the alcohol dependence group with the control group. We analyzed these ratios using an independent-samples t-test. Results The mean 2D:4D of patients was 0.934 (right hand) and 0.942 (left hand), while the mean 2D:4D of controls was 0.956 (right hand) and 0.958 (left hand). Values for both hands were significantly lower for patients than controls (p<0.001, right hand; p=0.004, left hand). Conclusion Patients who are alcohol dependent have a significantly lower 2D:4D than controls, similar to the results of previous studies, which suggest that a higher prenatal testosterone level in the gonadal period is related to alcoholism. Furthermore, 2D:4D is a possible predictive marker of alcohol dependence. PMID:27121425

  2. PREFACE: 2nd International Conference on Competitive Materials and Technological Processes (IC-CMTP2)

    NASA Astrophysics Data System (ADS)

    László, Gömze A.

    2013-12-01

    Competitiveness is one of the most important factors in our life and it plays a key role in the efficiency both of organizations and societies. The more scientifically supported and prepared organizations develop more competitive materials with better physical, chemical and biological properties and the leading companies apply more competitive equipment and technology processes. The aims of the 2nd International Conference on Competitive Materials and Technology Processes (ic-cmtp2) are the following: Promote new methods and results of scientific research in the fields of material, biological, environmental and technology sciences; Change information between the theoretical and applied sciences as well as technical and technological implantations. Promote the communication between the scientist of different nations, countries and continents. Among the major fields of interest are materials with extreme physical, chemical, biological, medical, thermal, mechanical properties and dynamic strength; including their crystalline and nano-structures, phase transformations as well as methods of their technological processes, tests and measurements. Multidisciplinary applications of materials science and technological problems encountered in sectors like ceramics, glasses, thin films, aerospace, automotive and marine industry, electronics, energy, construction materials, medicine, biosciences and environmental sciences are of particular interest. In accordance to the program of the conference ic-cmtp2, more than 250 inquiries and registrations from different organizations were received. Researchers from 36 countries in Asia, Europe, Africa, North and South America arrived at the venue of conference. Including co-authors, the research work of more than 500 scientists are presented in this volume. Professor Dr Gömze A László Chair, ic-cmtp2 The PDF also contains lists of the boards, session chairs and sponsors.

  3. Conference Report on the 2nd International Symposium on Lithium Applications for Fusion Devices

    NASA Astrophysics Data System (ADS)

    Ono, M.; Bell, M. G.; Hirooka, Y.; Kaita, R.; Kugel, H. W.; Mazzitelli, G.; Menard, J. E.; Mirnov, S. V.; Shimada, M.; Skinner, C. H.; Tabares, F. L.

    2012-03-01

    The 2nd International Symposium on Lithium Applications for Fusion Devices (ISLA-2011) was held on 27-29 April 2011 at the Princeton Plasma Physics Laboratory (PPPL) with broad participation from the community working on aspects of lithium research for fusion energy development. This community is expanding rapidly in many areas including experiments in magnetic confinement devices and a variety of lithium test stands, theory and modeling and developing innovative approaches. Overall, 53 presentations were given representing 26 institutions from 10 countries. The latest experimental results from nine magnetic fusion devices were given in 24 presentations, from NSTX (PPPL, USA), LTX (PPPL, USA), FT-U (ENEA, Italy), T-11M (TRINITY, RF), T-10 (Kurchatov Institute, RF), TJ-II (CIEMAT, Spain), EAST (ASIPP, China), HT-7 (ASIPP, China), and RFX (Padova, Italy). Sessions were devoted to: I. Lithium in magnetic confinement experiments (facility overviews), II. Lithium in magnetic confinement experiments (topical issues), III. Special session on liquid lithium technology, IV. Lithium laboratory test stands, V. Lithium theory/modeling/comments, VI. Innovative lithium applications and VII. Panel discussion on lithium PFC viability in magnetic fusion reactors. There was notable participation from the fusion technology communities, including the IFE, IFMIF and TBM communities providing productive exchanges with the physics oriented magnetic confinement lithium research groups. It was agreed to continue future exchanges of ideas and data to help develop attractive liquid lithium solutions for very challenging magnetic fusion issues, such as development of a high heat flux steady-state divertor concept and acceptable plasma disruption mitigation techniques while improving plasma performance with lithium. The next workshop will be held at ENEA, Frascati, Italy in 2013.

  4. A convective divertor utilizing a 2nd-order magnetic field null

    NASA Astrophysics Data System (ADS)

    Rognlien, Thomas

    2014-10-01

    New results motivate a detailed study of a magnetic divertor concept characterized by strong plasma convection near a poloidal magnetic field (Bp) null region. The configuration is that of a near-2nd-order Bp null (Bp ~ Δ r2) , as in a snowflake divertor. The concept has 2 key features: (A) Convection spreads the heat flux between multiple divertor legs and further broadens the heat-flux profile within each leg, thereby greatly reducing target-plate heat loads. (B) The heat flux is further reduced by line radiation in each leg in detachment-like ionization zones. Theory indicates that convective turbulence arises when the poloidal plasma beta, βp = 2μ0nT/B p 2 >> 1 . Measurements in TCV now more fully quantify earlier NSTX and TCV observations of plasma mixing, and related modeling of TCV indicates that strongly enhanced null-region transport is present. Convective mixing provides a stabilizing mechanism to prevent the ionization fronts (hydrogenic and impurity) from collapsing to a highly radiating core MARFE. Also, the radiating zone maps to a very small region at the midplane owing to the very weak Bp in the convective region, thus minimizing its impact on the core plasma. Detailed calculations are reported that combine features A and B noted above. The plasma mixing mechanisms are described together with the corresponding transport model implemented in the 2D UEDGE edge transport code. UEDGE calculations are presented that quantify the roles of mixing, impurity radiation, and detachment stability for a realistic snowflake configuration. Work in collaboration with D.D. Ryutov, S.I. Krasheninnikov, and M.V. Umansky. Performed for the U.S. DoE by LLNS, LLC, LLNL, under Contract DE-AC52-07NA27344.

  5. The Influence of Instructional Climates on Time Spent in Management Tasks and Physical Activity of 2nd-Grade Students during Physical Education

    ERIC Educational Resources Information Center

    Logan, Samuel W.; Robinson, Leah E.; Webster, E. Kipling; Rudisill, Mary E.

    2015-01-01

    The purpose of this study is to determine the effect of two physical education (PE) instructional climates (mastery, performance) on the percentage of time students spent in a) moderate-to-vigorous physical activity (MVPA) and b) management tasks during PE in 2nd-grade students. Forty-eight 2nd graders (mastery, n = 23; performance, n = 25)…

  6. Evaluation of the Battelle Developmental Inventory, 2nd Edition, Screening Test for Use in States' Child Outcomes Measurement Systems under the Individuals with Disabilities Education Act

    ERIC Educational Resources Information Center

    Elbaum, Batya; Gattamorta, Karina A.; Penfield, Randall D.

    2010-01-01

    This study evaluated the Battelle Developmental Inventory, 2nd Edition, Screening Test (BDI-2 ST) for use in states' child outcomes accountability systems under the Individuals with Disabilities Education Act. Complete Battelle Developmental Inventory, 2nd Edition (BDI-2), assessment data were obtained for 142 children, ages 2 to 62 months, who…

  7. 4. STAIR, FROM SECOND FLOOR TO THIRD FLOOR, FROM NORTHEAST. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    4. STAIR, FROM SECOND FLOOR TO THIRD FLOOR, FROM NORTHEAST. Plan of stair is elliptical, the inside well measuring 54' on major axis and 14' on minor axis. ALSO NOTE HIGH REEDED WAINSCOT - Saltus-Habersham House, 802 Bay Street, Beaufort, Beaufort County, SC

  8. 18. FOURTH FLOOR BLDG. 28, RAISED CONCRETE SLAB FLOOR WITH ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    18. FOURTH FLOOR BLDG. 28, RAISED CONCRETE SLAB FLOOR WITH BLOCKS AND PULLEYS OVERHEAD LOOKING NORTHEAST. - Fafnir Bearing Plant, Bounded on North side by Myrtle Street, on South side by Orange Street, on East side by Booth Street & on West side by Grove Street, New Britain, Hartford County, CT

  9. Floor Plans: Section "AA", Section "BB"; Floor Framing Plans: Section ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Floor Plans: Section "A-A", Section "B-B"; Floor Framing Plans: Section "A-A", Section "B-B" - Fort Washington, Fort Washington Light, Northeast side of Potomac River at Fort Washington Park, Fort Washington, Prince George's County, MD

  10. VIEW OF WIDE STAIR TO SECOND FLOOR FROM GROUND FLOOR. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    VIEW OF WIDE STAIR TO SECOND FLOOR FROM GROUND FLOOR. VIEW FACING SOUTH - U.S. Naval Base, Pearl Harbor, Ford Island Polaris Missile Lab & U.S. Fleet Ballistic Missile Submarine Training Center, Between Lexington Boulvevard and the sea plane ramps on the southwest side of Ford Island, Pearl City, Honolulu County, HI

  11. 13. Bottom floor, tower interior showing concrete floor and cast ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    13. Bottom floor, tower interior showing concrete floor and cast iron bases for oil butts (oil butts removed when lighthouse lamp was converted to electric power.) - Block Island Southeast Light, Spring Street & Mohegan Trail at Mohegan Bluffs, New Shoreham, Washington County, RI

  12. 18. MAIN FLOOR HOLDING TANKS Main floor, looking at ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    18. MAIN FLOOR - HOLDING TANKS Main floor, looking at holding tanks against the west wall, from which sluice gates are seen protruding. Right foreground-wooden holding tanks. Note narrow wooden flumes through which fish were sluiced into holding and brining tanks. - Hovden Cannery, 886 Cannery Row, Monterey, Monterey County, CA

  13. Ocean floor boundaries.

    PubMed

    Hedberg, H D

    1979-04-13

    The base of the continental slope, combined with the concepts of a boudary zone, a technical advisory boundary commission, and special treatment for restricted seas, offers a readily attainable, natural, practicable, and equitable boundary between national and international jurisdiction over the ocean floor. There is no point in bringing into the boundary formula the unnecessary added complication of thickness of sediments, as recently proposed. Review of the U.S. offshore brings out the critical importance with respect to energy resources of proper choice of boundary principles and proper determination of the base-of-continent line about our shores. The advice of the pertinent science and technology community should urgently be sought and contributed to decisions on offshore boundaries.

  14. Floor-plan radar

    NASA Astrophysics Data System (ADS)

    Falconer, David G.; Ueberschaer, Ronald M.

    2000-07-01

    Urban-warfare specialists, law-enforcement officers, counter-drug agents, and counter-terrorism experts encounter operational situations where they must assault a target building and capture or rescue its occupants. To minimize potential casualties, the assault team needs a picture of the building's interior and a copy of its floor plan. With this need in mind, we constructed a scale model of a single- story house and imaged its interior using synthetic-aperture techniques. The interior and exterior walls nearest the radar set were imaged with good fidelity, but the distal ones appear poorly defined and surrounded by ghosts and artifacts. The latter defects are traceable to beam attenuation, wavefront distortion, multiple scattering, traveling waves, resonance phenomena, and other effects not accounted for in the traditional (noninteracting, isotropic point scatterer) model for radar imaging.

  15. Flow Along Valley Floors

    NASA Technical Reports Server (NTRS)

    2003-01-01

    [figure removed for brevity, see original site]

    Released 9 May 2003

    Lines indicative of flow in a valley floor (east to west) cut across similar lines in a slightly smaller valley (southeast to northwest), indicating both that material flowed along the valley floor (as opposed to across it) and that relative flow ages may be determined from crosscutting relationships.

    Image information: VIS instrument. Latitude 39.6, Longitude 31.1East (328.9). 19 meter/pixel resolution.

    Note: this THEMIS visual image has not been radiometrically nor geometrically calibrated for this preliminary release. An empirical correction has been performed to remove instrumental effects. A linear shift has been applied in the cross-track and down-track direction to approximate spacecraft and planetary motion. Fully calibrated and geometrically projected images will be released through the Planetary Data System in accordance with Project policies at a later time.

    NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The Thermal Emission Imaging System (THEMIS) was developed by Arizona State University, Tempe, in collaboration with Raytheon Santa Barbara Remote Sensing. The THEMIS investigation is led by Dr. Philip Christensen at Arizona State University. Lockheed Martin Astronautics, Denver, is the prime contractor for the Odyssey project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena.

  16. Differential contribution of specific working memory components to mathematics achievement in 2nd and 3rd graders.

    PubMed

    Meyer, M L; Salimpoor, V N; Wu, S S; Geary, D C; Menon, V

    2010-04-01

    The contribution of the three core components of working memory (WM) to the development of mathematical skills in young children is poorly understood. The relation between specific WM components and Numerical Operations, which emphasize computation and fact retrieval, and Mathematical Reasoning, which emphasizes verbal problem solving abilities in 48 2nd and 50 3rd graders was assessed using standardized WM and mathematical achievement measures. For 2nd graders, the central executive and phonological components predicted Mathematical Reasoning skills; whereas the visuo-spatial component predicted both Mathematical Reasoning and Numerical Operations skills in 3rd graders. This pattern suggests that the central executive and phonological loop facilitate performance during early stages of mathematical learning whereas visuo-spatial representations play an increasingly important role during later stages. We propose that these changes reflect a shift from prefrontal to parietal cortical functions during mathematical skill acquisition. Implications for learning and individual differences are discussed.

  17. [Re-operations for 2nd primary lung cancer detected during follow-up after lung cancer surgery].

    PubMed

    Tsuchida, Masanori

    2013-07-01

    Re-operations for 2nd primary lung cancers are one of the most challenging modality for thoracic surgeons. Surgeons should have knowledge of indication of re-operations as well as surgical techniques and perioperative management of patients with 2nd primary lung cancers. When performing repeated pulmonary resection on the same side of the 1st surgery, following points are important for accomplishment of a safe re-operation:1.Wide thoracotomy with muscle dissections is recommended. 2.Throughout adhesion lysis between lung parenchyma and surrounding structures are required before manipulating pulmonary vessels. 3.The main pulmonary artery is encircled before dissection of the pulmonary artery. 4.Surgeons should be familiar with intrapericardial exposure of the main pulmonary artery. The techniques consist of division of the ligament of arteriosum, incision of the pericardium, and encircle of the origin of the mail pulmonary. Re-operations for metachronous lung cancers provided favorable survival in patients with adequate physiologic pulmonary reserve.

  18. Physical properties of double perovskite-type barium neodymium osmate Ba{sub 2}NdOsO{sub 6}

    SciTech Connect

    Wakeshima, Makoto; Hinatsu, Yukio; Ohoyama, Kenji

    2013-01-15

    The crystal, magnetic structures and physical properties of the double perovskite-type barium neodymium osmate Ba{sub 2}NdOsO{sub 6} are investigated through powder X-ray and neutron diffraction, electrical conductivity, magnetic susceptibility, and specific heat measurements. The Rietveld analysis reveals that the Nd and Os ions are arranged with regularity over the six-coordinate B sites in a distorted perovskite ABO{sub 3} framework. The monoclinic crystal structure described by space group P2{sub 1}/n (tilt system a{sup -}a{sup -}c{sup +}) becomes more distorted with decreasing temperature from 300 K down to 2.5 K. This compound shows a long-range antiferromagnetic ordering of Os{sup 5+} below 65 K. An antiferromagnetic ordering of Nd{sup 3+} also occurs at lower temperatures ({approx}20 K). The magnetic structure is of Type I and the magnetic moments of Nd{sup 3+} and Os{sup 5+} ions are in the same direction in the ab-plane. - Graphical Abstract: The Magnetic structure of Ba{sub 2}NdOsO{sub 6} is of Type I, and the magnetic moments of the Nd{sup 3+} and Os{sup 5+} ions are in the same direction in the ab-plane. Highlights: Black-Right-Pointing-Pointer Crystal structures of Ba{sub 2}NdOsO{sub 6} are determined to be monoclinic below 300 K. Black-Right-Pointing-Pointer Its electrical resistivity shows a Mott variable-range hopping behavior with localized carriers. Black-Right-Pointing-Pointer An antiferromagnetic ordering of the Os{sup 5+}moment occurs at 65 K. Black-Right-Pointing-Pointer The magnetic structure of Ba{sub 2}NdOsO{sub 6} is determined to be of Type I.

  19. Teachers' Spatial Anxiety Relates to 1st-and 2nd-Graders' Spatial Learning

    ERIC Educational Resources Information Center

    Gunderson, Elizabeth A.; Ramirez, Gerardo; Beilock, Sian L.; Levine, Susan C.

    2013-01-01

    Teachers' anxiety about an academic domain, such as math, can impact students' learning in that domain. We asked whether this relation held in the domain of spatial skill, given the importance of spatial skill for success in math and science and its malleability at a young age. We measured 1st-and 2nd-grade teachers' spatial anxiety…

  20. What's New in Floor Care.

    ERIC Educational Resources Information Center

    Griffin, William R.

    1999-01-01

    Examines some of the new equipment, chemicals, and procedures in floor care to help educational facility managers develop floor care programs and improve performance. Trends include more mechanization, higher concentrations and environmentally preferable products for cleaning, and the use of written cleaning procedures. (GR)

  1. Emotional and Behavioral Disorders in 1.5th Generation, 2nd Generation Immigrant Children, and Foreign Adoptees.

    PubMed

    Tan, Tony Xing

    2016-10-01

    Existing theories (e.g., acculturative stress theory) cannot adequately explain why mental disorders in immigrants are less prevalent than in non-immigrants. In this paper, the culture-gene co-evolutionary theory of mental disorders was utilized to generate a novel hypothesis that connection to heritage culture reduces the risk for mental disorders in immigrant children. Four groups of children aged 2-17 years were identified from the 2007 United States National Survey of Children's Health: 1.5th generation immigrant children (n = 1378), 2nd generation immigrant children (n = 4194), foreign adoptees (n = 270), and non-immigrant children (n = 54,877). The 1.5th generation immigrant children's connection to their heritage culture is stronger than or similar to the 2nd generation immigrants, while the foreign adoptees have little connection to their birth culture. Controlling for age, sex, family type and SES, the odds for having ADD/ADHD, Conduct Disorder, Anxiety Disorder, and Depression diagnosis were the lowest for the 1.5th generation immigrant children, followed by the 2nd generation immigrant children and the foreign adoptees. The foreign adoptees and non-adopted children were similar in the odds of having these disorders. Connection to heritage culture might be the underlying mechanism that explained recent immigrants' lower rates of mental disorders.

  2. White Paper Summary of 2nd ASTM International Workshop on Hydrides in Zirconium Alloy Cladding

    SciTech Connect

    Sindelar, R.; Louthan, M.; PNNL, B.

    2015-05-29

    This white paper recommends that ASTM International develop standards to address the potential impact of hydrides on the long term performance of irradiated zirconium alloys. The need for such standards was apparent during the 2nd ASTM International Workshop on Hydrides in Zirconium Alloy Cladding and Assembly Components, sponsored by ASTM International Committee C26.13 and held on June 10-12, 2014, in Jackson, Wyoming. The potentially adverse impacts of hydrogen and hydrides on the long term performance of irradiated zirconium-alloy cladding on used fuel were shown to depend on multiple factors such as alloy chemistry and processing, irradiation and post irradiation history, residual and applied stresses and stress states, and the service environment. These factors determine the hydrogen content and hydride morphology in the alloy, which, in turn, influence the response of the alloy to the thermo-mechanical conditions imposed (and anticipated) during storage, transport and disposal of used nuclear fuel. Workshop presentations and discussions showed that although hydrogen/hydride induced degradation of zirconium alloys may be of concern, the potential for occurrence and the extent of anticipated degradation vary throughout the nuclear industry because of the variations in hydrogen content, hydride morphology, alloy chemistry and irradiation conditions. The tools and techniques used to characterize hydrides and hydride morphologies and their impacts on material performance also vary. Such variations make site-to-site comparisons of test results and observations difficult. There is no consensus that a single material or system characteristic (e.g., reactor type, burnup, hydrogen content, end-of life stress, alloy type, drying temperature, etc.) is an effective predictor of material response during long term storage or of performance after long term storage. Multi-variable correlations made for one alloy may not represent the behavior of another alloy exposed to

  3. PREFACE: 1st-2nd Young Researchers Meetings in Rome - Proceedings

    NASA Astrophysics Data System (ADS)

    YRMR Organizing Committee; Cannuccia, E.; Mazzaferro, L.; Migliaccio, M.; Pietrobon, D.; Stellato, F.; Veneziani, M.

    2011-03-01

    Students in science, particularly in physics, face a fascinating and challenging future. Scientists have proposed very interesting theories, which describe the microscopic and macroscopic world fairly well, trying to match the quantum regime with cosmological scales. Between the extremes of this scenario, biological phenomena in all their complexity take place, challenging the laws we observe in the atomic and sub-atomic world. More and more accurate and complex experiments have been devised and these are now going to test the paradigms of physics. Notable experiments include: the Large Hadronic Collider (LHC), which is going to shed light on the physics of the Standard Model of Particles and its extensions; the Planck-Herschel satellites, which target a very precise measurement of the properties of our Universe; and the Free Electron Lasers facilities, which produce high-brilliance, ultrafast X-ray pulses, allowing the investigation of the fundamental processes of solid state physics, chemistry, and biology. These projects are the result of huge collaborations spread across the world, involving scientists belonging to different and complementary research fields: physicists, chemists, biologists and others, keen to make the best of these extraordinary laboratories. Even though each branch of science is experiencing a process of growing specialization, it is very important to keep an eye on the global picture, remaining aware of the deep interconnections between inherent fields. This is even more crucial for students who are beginning their research careers. These considerations motivated PhD students and young post-docs connected to the Roman scientific research area to organize a conference, to establish the background and the network for interactions and collaborations. This resulted in the 1st and 2nd Young Researchers Meetings in Rome (http://ryrm.roma2.infn.it), one day conferences aimed primarily at graduate students and post-docs, working in physics in Italy

  4. Laparoscopy for pelvic floor disorders.

    PubMed

    Van Geluwe, B; Wolthuis, A; D'Hoore, A

    2014-02-01

    Surgical treatment of pelvic floor disorders has significantly evolved during the last decade, with increasing understanding of anatomy, pathophysiology and the minimally-invasive 'revolution' of laparoscopic surgery. Laparoscopic pelvic floor repair requires a thorough knowledge of pelvic floor anatomy and its supportive components before repair of defective anatomy is possible. Several surgical procedures have been introduced and applied to treat rectal prolapse syndromes. Transabdominal procedures include a variety of rectopexies with the use of sutures or prosthesis and with or without resection of redundant sigmoid colon. Unfortunately there is lack of one generally accepted standard treatment technique. This article will focus on recent advances in the management of pelvic floor disorders affecting defecation, with a brief overview of contemporary concepts in pelvic floor anatomy and different laparoscopic treatment options.

  5. Proceedings of the Biennial EO/EEO Research Symposium (2nd) Held in Cocoa Beach, Florida on December 2-4, 1997

    DTIC Science & Technology

    1998-04-01

    PROCEEDINGS 2ND BIENNIAL EO/EEO RESEARCH SYMPOSIUM December 2-4, 1997 Cocoa Beach, Florida Sponsored by the Directorate of Research Defense Equal...2-89) Prescribed by ANSI Std. Z39-18 298-102 USAPPC V1.00 PROCEEDINGS 2nd BIENNIAL EO/EEO RESEARCH SYMPOSIUM December 2-4, 1997 COCOA BEACH, FLORIDA...Proceedings Editor Published April 1998 Preface PROCEEDINGS 2nd BIENNIAL EO/EEO RESEARCH SYMPOSIUM December 2-4, 1997 COCOA BEACH, FLORIDA The EO/EEO

  6. Making A Precisely Level Floor

    NASA Technical Reports Server (NTRS)

    Simpson, William G.; Walker, William H.; Cather, Jim; Burch, John B.; Clark, Keith M.; Johnston, Dwight; Henderson, David E.

    1989-01-01

    Floor-pouring procedure yields large surface level, smooth, and hard. Floor made of self-leveling, slow-curing epoxy with added black pigment. Epoxy poured to thickness no greater than 0.33 in. (0.84 cm) on concrete base. Base floor seasoned, reasonably smooth and level, and at least 4 in. (10cm) thick. Base rests on thermal barrier of gravel or cinders and contains no steel plates, dividers, or bridges to minimize thermal distortion. Metal retaining wall surrounds base.

  7. Low floor mass transit vehicle

    DOEpatents

    Emmons, J. Bruce; Blessing, Leonard J.

    2004-02-03

    A mass transit vehicle includes a frame structure that provides an efficient and economical approach to providing a low floor bus. The inventive frame includes a stiff roof panel and a stiff floor panel. A plurality of generally vertical pillars extend between the roof and floor panels. A unique bracket arrangement is disclosed for connecting the pillars to the panels. Side panels are secured to the pillars and carry the shear stresses on the frame. A unique seating assembly that can be advantageously incorporated into the vehicle taking advantage of the load distributing features of the inventive frame is also disclosed.

  8. Flooring choices for newborn ICUs.

    PubMed

    White, R D

    2007-12-01

    Floors are a major element of newborn intensive care unit (NICU) construction. They provide visual cues, sound control, and with certain materials, some degree of physical comfort for workers. Flooring materials may entail a significant cost for installation and upkeep and can have substantial ecological impact, both in the choice of the flooring itself, as well as the substances used to clean it. In this article the important aspects to consider for each factor are explored and recommendations are offered for appropriate choices in various NICU areas.

  9. 2nd International Conference on Rheology and Modeling of Materials (IC-RMM2)

    NASA Astrophysics Data System (ADS)

    2017-01-01

    Understanding the rheological properties of materials and their rheological behaviors during their manufacturing processes and in their applications in many cases can help to increase the efficiency and competitiveness not only of the finished goods and products but the organizations and societies also. The more scientific supported and prepared organizations develop more competitive products with better thermal, mechanical, physical, chemical and biological properties and the leading companies apply more competitive equipment and technology processes. The aims of the 2nd International Conference on Rheology and Modeling of Materials (ic-rmm2) and the parallel organized symposiums of the 1st International Symposium on Powder Injection Molding (is-pim1) and the 1st International Symposium on Rheology and Fracture of Solids (is-rfs1) are the followings: Promote new methods and results of scientific research in the fields of modeling and measurements of rheological properties and behavior of materials under processing and applications; Change information between the theoretical and applied sciences as well as technical and technological implantations. Promote the communication and collaboration between the scientists, researchers and engineers of different disciplines, different nations, countries and continents. The international conference ic-rmm2 and symposiums of is-pim1 and is-rfs1 provide a platform among the leading international scientists, researchers, PhD students and engineers for discussing recent achievements in measurement, modeling and application of rheology in materials technology and materials science of liquids, melts, solids, crystals and amorphous structures. Among thr major fields of interest are the influence of materials structures, mechanical stresses, temperatures, deformation speeds and shear rates on rheological and physical properties, phase transformation of foams, foods, polymers, plastics and other competitive materials like ceramics

  10. Development of Hydrologic Characterization Technology of Fault Zones -- Phase I, 2nd Report

    SciTech Connect

    Karasaki, Kenzi; Onishi, Tiemi; Black, Bill; Biraud, Sebastien

    2009-03-31

    This is the year-end report of the 2nd year of the NUMO-LBNL collaborative project: Development of Hydrologic Characterization Technology of Fault Zones under NUMO-DOE/LBNL collaboration agreement, the task description of which can be found in the Appendix 3. Literature survey of published information on the relationship between geologic and hydrologic characteristics of faults was conducted. The survey concluded that it may be possible to classify faults by indicators based on various geometric and geologic attributes that may indirectly relate to the hydrologic property of faults. Analysis of existing information on the Wildcat Fault and its surrounding geology was performed. The Wildcat Fault is thought to be a strike-slip fault with a thrust component that runs along the eastern boundary of the Lawrence Berkeley National Laboratory. It is believed to be part of the Hayward Fault system but is considered inactive. Three trenches were excavated at carefully selected locations mainly based on the information from the past investigative work inside the LBNL property. At least one fault was encountered in all three trenches. Detailed trench mapping was conducted by CRIEPI (Central Research Institute for Electric Power Industries) and LBNL scientists. Some intriguing and puzzling discoveries were made that may contradict with the published work in the past. Predictions are made regarding the hydrologic property of the Wildcat Fault based on the analysis of fault structure. Preliminary conceptual models of the Wildcat Fault were proposed. The Wildcat Fault appears to have multiple splays and some low angled faults may be part of the flower structure. In parallel, surface geophysical investigations were conducted using electrical resistivity survey and seismic reflection profiling along three lines on the north and south of the LBNL site. Because of the steep terrain, it was difficult to find optimum locations for survey lines as it is desirable for them to be as

  11. 21. VIEW OF THE FIRST FLOOR PLAN. THE FIRST FLOOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    21. VIEW OF THE FIRST FLOOR PLAN. THE FIRST FLOOR WAS USED FOR DEPLETED AND ENRICHED URANIUM FABRICATION. THE ORIGINAL DRAWING HAS BEEN ARCHIVED ON MICROFILM. THE DRAWING WAS REPRODUCED AT THE BEST QUALITY POSSIBLE. LETTERS AND NUMBERS IN THE CIRCLES INDICATE FOOTER AND/OR COLUMN LOCATIONS. - Rocky Flats Plant, Uranium Rolling & Forming Operations, Southeast section of plant, southeast quadrant of intersection of Central Avenue & Eighth Street, Golden, Jefferson County, CO

  12. 23. VIEW OF THE FIRST FLOOR PLAN. THE FIRST FLOOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    23. VIEW OF THE FIRST FLOOR PLAN. THE FIRST FLOOR HOUSED ADMINISTRATIVE OFFICES, THE CENTRAL COMPUTING, UTILITY SYSTEMS, ANALYTICAL LABORATORIES, AND MAINTENANCE SHOPS. THE ORIGINAL DRAWING HAS BEEN ARCHIVED ON MICROFILM. THE DRAWING WAS REPRODUCED AT THE BEST QUALITY POSSIBLE. LETTERS AND NUMBERS IN THE CIRCLES INDICATE FOOTER AND/OR COLUMN LOCATIONS. - Rocky Flats Plant, General Manufacturing, Support, Records-Central Computing, Southern portion of Plant, Golden, Jefferson County, CO

  13. 22. VIEW OF THE SECOND FLOOR PLAN. THE SECOND FLOOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    22. VIEW OF THE SECOND FLOOR PLAN. THE SECOND FLOOR CONTAINS THE AIR PLENUM ND SOME OFFICE SPACE. THE ORIGINAL DRAWING HAS BEEN ARCHIVED ON MICROFILM. THE DRAWING WAS REPRODUCED AT THE BEST QUALITY POSSIBLE. LETTERS AND NUMBERS IN THE CIRCLES INDICATE FOOTER AND/OR COLUMN LOCATIONS. - Rocky Flats Plant, Uranium Rolling & Forming Operations, Southeast section of plant, southeast quadrant of intersection of Central Avenue & Eighth Street, Golden, Jefferson County, CO

  14. Pelvic floor muscle training exercises

    MedlinePlus

    ... nlm.nih.gov/pubmed/22258946 . Dumoulin C, Hay-Smith J. Pelvic floor muscle training versus no treatment, ... nlm.nih.gov/pubmed/20091581 . Herderschee R, Hay-Smith EJC, Herbison GP, Roovers JP, Heineman MJ. Feedback ...

  15. Electrical Properties and Superconductivity of MSr2Nd2-xCexCu2O10-δ (M=Ta, Nb)

    NASA Astrophysics Data System (ADS)

    Zhu, Yingjie; Qian, Yitai; Li, Rukang; Wang, Shiwei; Chen, Zuyao; Chen, Zhaojia; Wang, Nanling; Zhou, Guien

    1992-09-01

    A new series of layered cuprate compounds MSr2Nd2-xCexCu2O10-δ (M=Ta, Nb) have been synthesized. The structure of the compounds is similar to that of T1-1222. A peak in the R-T curve for the sample of TaSr2Nd1.3Ce0.7Cu2O10-δ has been observed at about 50 K. For the sample of NbSr2Nd1.45Ce0.55Cu2O10-δ, metal-like conductivity behaviour has been observed. We have found superconductivity at about 13.2 K in the samples of NbSr2Nd2-xCexCu2O10-δ (x=0.49, 0.50, 0.51, 0.52).

  16. Japan's Global Role: Proceedings from the Symposium (2nd, Honolulu, Hawaii, October 25-26, 1991).

    ERIC Educational Resources Information Center

    Hawaii Univ., Honolulu. East-West Center.

    This document consists of eight presentations with responses given at the second in a series of symposia sponsored by the Japan-America Society of in a series of symposia sponsored by the Japan-America Society of Hawaii. Having emerged as an economic superpower, Japan's role on the global stage is still finding its full range and is a topic of…

  17. PROCEEDINGS: LOW- AND NO-VOC COATING TECHNOLOGIES - 2ND BIENNIAL INTERNATIONAL CONFERENCE

    EPA Science Inventory

    The report documents an international conference that provided a forum for the exchange of technical information on coating technologies. It focused on improved and emerging technologies that result in fewer volatile organic compound (VOC) and toxic air emissions that those from ...

  18. [In search of the ideal surgical treatment for lymphedema. Report of 2nd European Conference on supermicrosurgery (Barcelona - March 2012)].

    PubMed

    Rausky, J; Robert, N; Binder, J-P; Revol, M

    2012-12-01

    Since more than 50 years, many surgeons all around the world try to find the perfect surgical technique to treat limb lymphedemas. Decongestive physiotherapy associated with the use of a compressive garment has been the primary choice for lymphedema treatment. Many different surgical techniques have been developed, however, to date, there is no consensus on surgical procedure. Most surgical experts of lymphedema met in the second European Conference on supermicrosurgery, organized on March 1st and 2nd 2012, in San Pau Hospital, Barcelona. Together they tried to clarify these different options and ideally a strategy for using these techniques.

  19. 2nd International Salzburg Conference on Neurorecovery (ISCN 2013) Salzburg/ Austria | November 28th - 29th, 2013

    PubMed Central

    Brainin, M; Muresanu, D; Slavoaca, D

    2014-01-01

    The 2nd International Salzburg Conference on Neurorecovery was held on the 28th and 29th of November, 2013, in Salzburg, one of the most beautiful cities in Austria, which is well known for its rich cultural heritage, world-famous music and beautiful surrounding landscapes. The aim of the conference was to discuss the progress in the field of neurorecovery. The conference brought together internationally renowned scientists and clinicians, who described the clinical and therapeutic relevance of translational research and its applications in neurorehabilitation. PMID:25713602

  20. Comparison of the large scale structure of the ISM in the 2nd and 3rd Galactic Quadrants

    NASA Astrophysics Data System (ADS)

    Könyves, V.; Kiss, Cs.

    2002-05-01

    In this paper we are questing the large scale structure of the interstellar medium (ISM) using IRAS/ISSA 60 and 100 mum maps in the 3rd Galactic Quadrant (GQ). Here we identified 41 loop-like intensity enhancements and analysed their far-infrared (FIR) properties. We found major differences in the distribution and characteristics of these features when comparing the results of the 2nd and the 3rd GQs. This discrepancy can be satisfactorily explained by basic differences of the structure of the ISM in these two Galactic Quadrants.

  1. 2nd International Salzburg Conference on Neurorecovery (ISCN 2013) Salzburg/Austria|November 28th-29th, 2013.

    PubMed

    Brainin, M; Muresanu, D; Slavoaca, D

    2014-01-01

    The 2nd International Salzburg Conference on Neurorecovery was held on the 28th and 29th of November, 2013, in Salzburg, one of the most beautiful cities in Austria, which is well known for its rich cultural heritage, world-famous music and beautiful surrounding landscapes. The aim of the conference was to discuss the progress in the field of neurorecovery. The conference brought together internationally renowned scientists and clinicians, who described the clinical and therapeutic relevance of translational research and its applications in neurorehabilitation.

  2. Brain order disorder 2nd group report of f-EEG

    NASA Astrophysics Data System (ADS)

    Lalonde, Francois; Gogtay, Nitin; Giedd, Jay; Vydelingum, Nadarajen; Brown, David; Tran, Binh Q.; Hsu, Charles; Hsu, Ming-Kai; Cha, Jae; Jenkins, Jeffrey; Ma, Lien; Willey, Jefferson; Wu, Jerry; Oh, Kenneth; Landa, Joseph; Lin, C. T.; Jung, T. P.; Makeig, Scott; Morabito, Carlo Francesco; Moon, Qyu; Yamakawa, Takeshi; Lee, Soo-Young; Lee, Jong-Hwan; Szu, Harold H.; Kaur, Balvinder; Byrd, Kenneth; Dang, Karen; Krzywicki, Alan; Familoni, Babajide O.; Larson, Louis; Harkrider, Susan; Krapels, Keith A.; Dai, Liyi

    2014-05-01

    Since the Brain Order Disorder (BOD) group reported on a high density Electroencephalogram (EEG) to capture the neuronal information using EEG to wirelessly interface with a Smartphone [1,2], a larger BOD group has been assembled, including the Obama BRAIN program, CUA Brain Computer Interface Lab and the UCSD Swartz Computational Neuroscience Center. We can implement the pair-electrodes correlation functions in order to operate in a real time daily environment, which is of the computation complexity of O(N3) for N=102~3 known as functional f-EEG. The daily monitoring requires two areas of focus. Area #(1) to quantify the neuronal information flow under arbitrary daily stimuli-response sources. Approach to #1: (i) We have asserted that the sources contained in the EEG signals may be discovered by an unsupervised learning neural network called blind sources separation (BSS) of independent entropy components, based on the irreversible Boltzmann cellular thermodynamics(ΔS < 0), where the entropy is a degree of uniformity. What is the entropy? Loosely speaking, sand on the beach is more uniform at a higher entropy value than the rocks composing a mountain - the internal binding energy tells the paleontologists the existence of information. To a politician, landside voting results has only the winning information but more entropy, while a non-uniform voting distribution record has more information. For the human's effortless brain at constant temperature, we can solve the minimum of Helmholtz free energy (H = E - TS) by computing BSS, and then their pairwise-entropy source correlation function. (i) Although the entropy itself is not the information per se, but the concurrence of the entropy sources is the information flow as a functional-EEG, sketched in this 2nd BOD report. Area #(2) applying EEG bio-feedback will improve collective decision making (TBD). Approach to #2: We introduce a novel performance quality metrics, in terms of the throughput rate of faster (

  3. FOREWORD: 2nd International Workshop on New Computational Methods for Inverse Problems (NCMIP 2012)

    NASA Astrophysics Data System (ADS)

    Blanc-Féraud, Laure; Joubert, Pierre-Yves

    2012-09-01

    Conference logo This volume of Journal of Physics: Conference Series is dedicated to the scientific contributions presented during the 2nd International Workshop on New Computational Methods for Inverse Problems, (NCMIP 2012). This workshop took place at Ecole Normale Supérieure de Cachan, in Cachan, France, on 15 May 2012, at the initiative of Institut Farman. The first edition of NCMIP also took place in Cachan, France, within the scope of the ValueTools Conference, in May 2011 (http://www.ncmip.org/2011/). The NCMIP Workshop focused on recent advances in the resolution of inverse problems. Indeed inverse problems appear in numerous scientific areas such as geophysics, biological and medical imaging, material and structure characterization, electrical, mechanical and civil engineering, and finance. The resolution of inverse problems consists of estimating the parameters of the observed system or structure from data collected by an instrumental sensing or imaging device. Its success firstly requires the collection of relevant observation data. It also requires accurate models describing the physical interactions between the instrumental device and the observed system, as well as the intrinsic properties of the solution itself. Finally, it requires the design of robust, accurate and efficient inversion algorithms. Advanced sensor arrays and imaging devices provide high rate and high volume data; in this context, the efficient resolution of the inverse problem requires the joint development of new models and inversion methods, taking computational and implementation aspects into account. During this one-day workshop, researchers had the opportunity to bring to light and share new techniques and results in the field of inverse problems. The topics of the workshop were: algorithms and computational aspects of inversion, Bayesian estimation, kernel methods, learning methods, convex optimization, free discontinuity problems, metamodels, proper orthogonal decomposition

  4. Channel Floor Yardangs

    NASA Technical Reports Server (NTRS)

    2004-01-01

    [figure removed for brevity, see original site]

    Released 19 July 2004 The atmosphere of Mars is a dynamic system. Water-ice clouds, fog, and hazes can make imaging the surface from space difficult. Dust storms can grow from local disturbances to global sizes, through which imaging is impossible. Seasonal temperature changes are the usual drivers in cloud and dust storm development and growth.

    Eons of atmospheric dust storm activity has left its mark on the surface of Mars. Dust carried aloft by the wind has settled out on every available surface; sand dunes have been created and moved by centuries of wind; and the effect of continual sand-blasting has modified many regions of Mars, creating yardangs and other unusual surface forms.

    The yardangs in this image are forming in channel floor deposits. The channel itself is funneling the wind to cause the erosion.

    Image information: VIS instrument. Latitude 4.5, Longitude 229.7 East (133.3 West). 19 meter/pixel resolution.

    Note: this THEMIS visual image has not been radiometrically nor geometrically calibrated for this preliminary release. An empirical correction has been performed to remove instrumental effects. A linear shift has been applied in the cross-track and down-track direction to approximate spacecraft and planetary motion. Fully calibrated and geometrically projected images will be released through the Planetary Data System in accordance with Project policies at a later time.

    NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The Thermal Emission Imaging System (THEMIS) was developed by Arizona State University, Tempe, in collaboration with Raytheon Santa Barbara Remote Sensing. The THEMIS investigation is led by Dr. Philip Christensen at Arizona State University. Lockheed Martin Astronautics, Denver, is the prime contractor for the Odyssey project, and developed and built the orbiter. Mission operations are

  5. [Medical support of the 65th Army during the East Prussian offensive operation performed by the 2nd Belorussian Front].

    PubMed

    Shelepov, A M; Leonik, S I; Lemeshkin, R N

    2015-02-01

    Prussian offensive operation performed by the 2nd Belorussian Front. An activity of the medical An activity of the medical service of the 65th Army during the East Prussian offensive operation performed by the 2nd Belorussian Front is a typical example of the medical support of troops during the final stages of World War II. Forms and methods of medical support management, which were developed during the war, haven't lost their importance in modern conditions. These methods include the establishment of specialized surgical and therapeutic field hospital, establishment of medical institutions in the Army, which worked on the evacuation directions and reserve of mobile hospitals and transport, timely extension of the first echelons of the hospital base front to change institutions hospital deployed the army base. A research of experience in organizing medical support of the offensive operations performed during the last year of World War II provides the material for the development of the theory of modern medical support operations and ability to provide on this basis, the continuity of the hospitals, the continuity of qualified and specialized medical care, improve the performance of diagnostic and treatment work.

  6. Influence of Nd dopant amount on microstructure and photoluminescence of TiO2:Nd thin films

    NASA Astrophysics Data System (ADS)

    Wojcieszak, Damian; Mazur, Michal; Kaczmarek, Danuta; Morgiel, Jerzy; Zatryb, Grzegorz; Domaradzki, Jaroslaw; Misiewicz, Jan

    2015-10-01

    TiO2 and TiO2:Nd thin films were deposited using reactive magnetron sputtering process from mosaic Ti-Nd targets with various Nd concentration. The thin films were characterized using X-ray diffraction (XRD), transmission electron microscopy (TEM) and spectroscopic techniques. Photoluminescence (PL) in the near infrared obtained upon 514.5 nm excitation was also examined. The relationship between the Nd concentration, structural, optical and photoluminescence properties of prepared thin films was investigated and discussed. XRD and TEM measurements showed that an increase in the Nd concentration in the thin films hinders the crystal growth in the deposited coatings. Depending on the Nd amount in the thin films, TiO2 with the rutile, mixed rutile-amorphous or amorphous phase was obtained. Transmittance measurements revealed that addition of Nd dopant to titania matrix did not deteriorate optical transparency of the coatings, however it influenced on the position of the fundamental absorption edge and therefore on the width of optical band gap energy. All TiO2:Nd thin films exhibited PL emission that occurred at ca. 0.91, 1.09 and 1.38 μm. Finally, results obtained for deposited coatings showed that titania with the rutile structure and 1.0 at.% of Nd was the most efficient in VIS to NIR photon conversion.

  7. Efficacy and Safety of rAAV2-ND4 Treatment for Leber’s Hereditary Optic Neuropathy

    PubMed Central

    Wan, Xing; Pei, Han; Zhao, Min-jian; Yang, Shuo; Hu, Wei-kun; He, Heng; Ma, Si-qi; Zhang, Ge; Dong, Xiao-yan; Chen, Chen; Wang, Dao-wen; Li, Bin

    2016-01-01

    Leber’s hereditary optic neuropathy (LHON) is a mitochondrially inherited disease leading to blindness. A mitochondrial DNA point mutation at the 11778 nucleotide site of the NADH dehydrogenase subunit 4 (ND4) gene is the most common cause. The aim of this study was to evaluate the efficacy and safety of a recombinant adeno-associated virus 2 (AAV2) carrying ND4 (rAAV2-ND4) in LHON patients carrying the G11778A mutation. Nine patients were administered rAAV2-ND4 by intravitreal injection to one eye and then followed for 9 months. Ophthalmologic examinations of visual acuity, visual field, and optical coherence tomography were performed. Physical examinations included routine blood and urine. The visual acuity of the injected eyes of six patients improved by at least 0.3 log MAR after 9 months of follow-up. In these six patients, the visual field was enlarged but the retinal nerve fibre layer remained relatively stable. No other outcome measure was significantly changed. None of the nine patients had local or systemic adverse events related to the vector during the 9-month follow-up period. These findings support the feasible use of gene therapy for LHON. PMID:26892229

  8. Functional anatomy of pelvic floor.

    PubMed

    Rocca Rossetti, Salvatore

    2016-03-31

    Generally, descriptions of the pelvic floor are discordant, since its complex structures and the complexity of pathological disorders of such structures; commonly the descriptions are sectorial, concerning muscles, fascial developments, ligaments and so on. On the contrary to understand completely nature and function of the pelvic floor it is necessary to study it in the most unitary view and in the most global aspect, considering embriology, philogenesy, anthropologic development and its multiple activities others than urological, gynaecological and intestinal ones. Recent acquirements succeeded in clarifying many aspects of pelvic floor activity, whose musculature has been investigated through electromyography, sonography, magnetic resonance, histology, histochemistry, molecular research. Utilizing recent research concerning not only urinary and gynecologic aspects but also those regarding statics and dynamics of pelvis and its floor, it is now possible to study this important body part as a unit; that means to consider it in the whole body economy to which maintaining upright position, walking and behavior or physical conduct do not share less than urinary, genital, and intestinal functions. It is today possible to consider the pelvic floor as a musclefascial unit with synergic and antagonistic activity of muscular bundles, among them more or less interlaced, with multiple functions and not only the function of pelvic cup closure.

  9. [Looking back but facing ahead: implementing lessons learned from the 2nd Lebanon War].

    PubMed

    Adini, Bruria; Laor, Danny; Lev, Boaz; Israeli, Avi

    2010-07-01

    The medical system utilizes a structured culture for learning lessons in order to improve the supply of services. Various tools are utilized to evaluate performance. The aim of the article is to describe the processes for learning lessons which were carried out following the Second Lebanon War and the major lessons that were identified and implemented. Three processes were performed: a process of learning Lessons of the heaLthcare system, initiated and led by the Supreme HeaLth Authority (SHA); After action review (AAR), initiated and led by the military Medical Corps and; at a later stage, a critique, initiated and led by the State Comptroller, that examined the performance of the medical system, as part of a critique on the preparedness of the home front. The following elements were defined as highly prioritized for improvement to elevate the preparedness for a future war: (1) deployment of unified clinics in conflict areas; (2) supply of medical services to the population in shelters; (3) deploying emergency medicine services, including the relationship between the Ministry of Health (MOH) and the Home Front Command (HFC); (4) defining the relationships between the MOH and HFC in deploying the community health services in emergencies; (5) protecting medical facilities and personal protection equipment for medical teams and; (6) treating acute stress reactions. The AAR, critique and learning lessons signify three different processes that can sometimes be contradictory. Nevertheless, it is possible to achieve organizational improvement white integrating between these three processes, as was displayed by the SHA.

  10. Pelvic Floor Ultrasound: A Review.

    PubMed

    Dietz, Hans Peter

    2017-03-01

    Female pelvic floor dysfunction encompasses a number of prevalent conditions and includes pelvic organ prolapse, urinary and fecal incontinence, obstructed defecation, and sexual dysfunction. In most cases neither etiology nor pathophysiology are well understood. Imaging has great potential to enhance both research and clinical management capabilities, and to date this potential is underutilized. Of the available techniques such as x-ray, computed tomography, magnetic resonance imaging, and ultrasound, the latter is generally superior for pelvic floor imaging, especially in the form of perineal or translabial imaging. The technique is safe, simple, cheap, easily accessible and provides high spatial and temporal resolutions.

  11. Nonsyndromic palate Synechia with floor of mouth

    PubMed Central

    Naidoo, Sharan; Bütow, Kurt W.

    2015-01-01

    To discuss the embryological basis, sequela and management of intraoral synechia, and to report on the incidence of this condition at a facial cleft deformity clinic (FCDC), with specific attention to two rare cases of mucosal bands involving the floor of the mouth and palate. Review of the literature and a retrospective analysis of FCDC and case report of two cases. During the period of 30 years (1983–2013), the FCDC - University of Pretoria has managed in excess of 4000 cases. A review of the clinic statistics revealed only six cases in which intraoral synechiae occurred. The rarity of this condition at the FCDC is in keeping with the rare incidence in the international literature. Four syndromic cases were identified. Three cases were cleft palate lateral synechia syndrome, and one was an orofacial digital syndrome. Two nonsyndromic cases were identified, and both cases involved the floor of the mouth and palate. The attending physicians and surgeons should be aware of the most appropriate timing for management of this condition, in order to avoid unwanted sequelae. Supportive care should be provided, and emergency airway protocol should be available for all cases. A differential diagnosis should be considered which includes syndromic conditions. PMID:26389045

  12. The pelvic floor in health and disease.

    PubMed Central

    Shelton, A A; Welton, M L

    1997-01-01

    Normal pelvic floor function involves a set of learned and reflex responses that are essential for the normal control and evacuation of stool. A variety of functional disturbances of the pelvic floor, including incontinence and constipation, are not life threatening, but can cause significant distress to affected patients. Understanding the normal anatomy and physiology of the pelvic floor is essential to understanding and treating these disorders of defecation. This article describes the normal function of the pelvic floor, the diagnostic tools available to investigate pelvic floor dysfunction, and the etiology, diagnosis, and management of the functional pelvic floor disorders that lead to incontinence and constipation. Images Figure 1. PMID:9291746

  13. Use of 2nd and 3rd Level Correlation Analysis for Studying Degradation in Polycrystalline Thin-Film Solar Cells

    SciTech Connect

    Albin, D. S.; del Cueto, J. A.; Demtsu, S. H.; Bansal, S.

    2011-03-01

    The correlation of stress-induced changes in the performance of laboratory-made CdTe solar cells with various 2nd and 3rd level metrics is discussed. The overall behavior of aggregated data showing how cell efficiency changes as a function of open-circuit voltage (Voc), short-circuit current density (Jsc), and fill factor (FF) is explained using a two-diode, PSpice model in which degradation is simulated by systematically changing model parameters. FF shows the highest correlation with performance during stress, and is subsequently shown to be most affected by shunt resistance, recombination and in some cases voltage-dependent collection. Large decreases in Jsc as well as increasing rates of Voc degradation are related to voltage-dependent collection effects and catastrophic shunting respectively. Large decreases in Voc in the absence of catastrophic shunting are attributed to increased recombination. The relevance of capacitance-derived data correlated with both Voc and FF is discussed.

  14. Effect of the nanocrystalline structure type on the optical properties of TiO2:Nd (1 at.%) thin films

    NASA Astrophysics Data System (ADS)

    Mazur, Michal; Wojcieszak, Damian; Kaczmarek, Danuta; Domaradzki, Jaroslaw; Zatryb, Grzegorz; Misiewicz, Jan; Morgiel, Jerzy

    2015-04-01

    Titanium dioxide thin films, each doped with the same amount of neodymium (1 at.%) were deposited by Low Pressure Hot Target Reactive Sputtering and High Energy Reactive Magnetron Sputtering processes in order to obtain anatase and rutile thin film structures respectively. The microstructure and phase composition were analyzed using the transmission electron microscopy method including high resolution electron microscopy imaging. The measurements of the optical properties showed, that both prepared thin films were transparent in the visible light range and had a low extinction coefficient of ca. 3 ṡ 10-3. The thin film with the anatase structure had a lower cut-off wavelength and refractive index and a higher value of optical energy band gap as-compared to the TiO2:Nd coating with the rutile structure. Simultaneously, more efficient photoluminescence emission was observed for the rutile thin films.

  15. 2nd ESMO Consensus Conference in Lung Cancer: locally advanced stage III non-small-cell lung cancer.

    PubMed

    Eberhardt, W E E; De Ruysscher, D; Weder, W; Le Péchoux, C; De Leyn, P; Hoffmann, H; Westeel, V; Stahel, R; Felip, E; Peters, S

    2015-08-01

    To complement the existing treatment guidelines for all tumour types, ESMO organises consensus conferences to focus on specific issues in each type of tumour. The 2nd ESMO Consensus Conference on Lung Cancer was held on 11-12 May 2013 in Lugano. A total of 35 experts met to address several questions on non-small-cell lung cancer (NSCLC) in each of four areas: pathology and molecular biomarkers, first-line/second and further lines of treatment in advanced disease, early-stage disease and locally advanced disease. For each question, recommendations were made including reference to the grade of recommendation and level of evidence. This consensus paper focuses on locally advanced disease.

  16. International collaborative study for establishment of the 2nd WHO International Standard for Haemophilus influenzae type b polysaccharide.

    PubMed

    Mawas, Fatme; Burkin, Karena; Dougall, Thomas; Saydam, Manolya; Rigsby, Peter; Bolgiano, Barbara

    2015-11-01

    In this report we present the results of a collaborative study for the preparation and calibration of a replacement International Standard (IS) for Haemophilus influenzae type b polysaccharide (polyribosyl ribitol phosphate; 5-d-ribitol-(1 → 1)-β-d-ribose-3-phosphate; PRP). Two candidate preparations were evaluated. Thirteen laboratories from 9 different countries participated in the collaborative study to assess the suitability and determine the PRP content of two candidate standards. On the basis of the results from this study, Candidate 2 (NIBSC code 12/306) has been established as the 2nd WHO IS for PRP by the Expert Committee of Biological Standards of the World Health Organisation with a content of 4.904 ± 0.185mg/ampoule, as determined by the ribose assays carried out by 11 of the participating laboratories.

  17. The 2nd Order Focusing by Energy for TOF Sector Field Mass Analyzer with an Orthogonal Acceleration: Theory, Modeling, Experiment

    NASA Astrophysics Data System (ADS)

    Poteshin, S. S.; Chernyshev, D. M.; Sysoev, Alexey A.; Sysoev, Alexander A.

    Currently axially symmetric type of analyzer with an electrostatic sector fields (AESF) is rarely used to construct time-of-flight mass spectrometers. The main drawback, hindering the wider use of the analyzers of this type, is the lack of chromatic second-order focusing by energy. However, the configuration of AESF in combination with orthogonal accelerator (OA) allows to achieved it through compensation of energy aberrations of the analyzer in the system of orthogonal input of the ion beam. In the presented work the results of theoretical calculation, simulation and experimentally obtained data are compared. Characteristics of the analyzer with OA in a large extent depend on the parameters of the incoming ion beam. Data of modeling the 2nd stage of gas-dynamic interface, which have the greatest influence on the parameters of the ion beam, is provided.

  18. Characterization of γ and γ' phases in 2nd and 4th generation single crystal nickel-base superalloys

    NASA Astrophysics Data System (ADS)

    Zietara, Maciej; Neumeier, Steffen; Göken, Mathias; Czyrska-Filemonowicz, Aleksandra

    2017-01-01

    A Ni based single crystal superalloy from the 2nd generation, PWA 1484, and one from the 4th generation, PWA 1497, were comparatively studied by scanning electron microscopy, energy dispersive X-ray spectroscopy and nanoindentation technique in an atomic force microscope (NI-AFM) after high temperature creep deformation. During primary creep of both generations of superalloys, γ' precipitates start to coalesce and grow directionally. Further creep deformation leads to the topological inversion and coarsening of the rafted microstructure. The NI-AFM technique was used for measurements of the hardness of the γ and γ' phases in as-received and creep deformed samples in various conditions. The g matrix of the PWA 1497 superalloy is on average 0.8 GPa harder than that of PWA 1484 that can be explained by higher content of Re and Ru, since they partition predominantly to the matrix phase.

  19. 2nd International Conference on Pathways, Networks, and Systems: Theory and Experiments

    SciTech Connect

    Aegean Conferences

    2004-10-01

    With the availability of whole genome sequences, research attention shifts from gene sequences and genome content to protein functions and systems biology. Genes comprise a major component of the ''parts list'' that is required for building and maintaining of living organisms. Genome DNA sequences reveal the genetic inventory for a rapidly increasing number of species. Defining and interpreting the instruction manual for protein functions, individually and collectively, is the emerging challenge. Defining protein functions is a complex problem because each gene typically encodes several distinct proteins. As a result, the protein inventory includes as many as 100,000 distinct proteins. Protein functions can vary with developmental stage, anatomical location, and environmental context. Like the problem of sequencing the human genome, the multidimensional nature of protein functions in time, space and context constitutes one of the ''big'' problems in biomedical research. Resolving this problem is key to revolutionizing health care where a deep understanding of complex biological systems will lead to more powerful and specific ways to treat, and perhaps, even prevent birth defects and adult diseases. The meeting addressed the above issues.

  20. Early and comprehensive management of atrial fibrillation: executive summary of the proceedings from the 2nd AFNET-EHRA consensus conference 'research perspectives in AF'.

    PubMed

    Kirchhof, Paulus; Bax, Jeroen; Blomstrom-Lundquist, Carina; Calkins, Hugh; Camm, A John; Cappato, Ricardo; Cosio, Francisco; Crijns, Harry; Diener, Hans-Christian; Goette, Andreas; Israel, Carsten W; Kuck, Karl-Heinz; Lip, Gregory Y H; Nattel, Stanley; Page, Richard L; Ravens, Ursula; Schotten, Ulrich; Steinbeck, Gerhard; Vardas, Panos; Waldo, Albert; Wegscheider, Karl; Willems, Stephan; Breithardt, Günter

    2009-12-01

    Atrial fibrillation (AF) causes important mortality and morbidity on a population-level. So far, we do not have the means to prevent AF or AF-related complications adequately. Therefore, over 70 experts on atrial fibrillation convened for the 2nd AFNET/EHRA consensus conference to suggest directions for research to improve management of AF patients (Appendix 1). The group defined three main areas in need for research in AF: 1. better understanding of the mechanisms of AF; 2. Improving rhythm control monitoring and management; and 3. comprehensive cardiovascular risk management in AF patients. The group put forward the hypothesis that successful therapy of AF and its associated complications will require comprehensive therapy. This applies e.g. to the "old" debate of "rate versus rhythm control", since rhythm control is generally added to underlying (continued) rate control therapy, but also to the emerging debate of "antiarrhythmic drugs versus catheter ablation", of which both may be needed in most patients to maintain sinus rhythm, but also to therapy of conditions that predispose to AF and contribute to cardiovascular complications such as stroke, cognitive decline, heart failure, and acute coronary syndromes. We call for research initiatives aiming at a better understanding of the different causes of AF and its complications, and at development and validation of mechanism-based therapies. The future of AF therapy may require a combination of management of underlying and concomitant conditions, early and comprehensive rhythm control therapy, adequate control of ventricular rate and cardiac function, and continuous therapy to prevent AF-associated complications (e.g. antithrombotic therapy). The reasons for these suggestions are detailed in this paper.

  1. Ploughing the deep sea floor.

    PubMed

    Puig, Pere; Canals, Miquel; Company, Joan B; Martín, Jacobo; Amblas, David; Lastras, Galderic; Palanques, Albert

    2012-09-13

    Bottom trawling is a non-selective commercial fishing technique whereby heavy nets and gear are pulled along the sea floor. The direct impact of this technique on fish populations and benthic communities has received much attention, but trawling can also modify the physical properties of seafloor sediments, water–sediment chemical exchanges and sediment fluxes. Most of the studies addressing the physical disturbances of trawl gear on the seabed have been undertaken in coastal and shelf environments, however, where the capacity of trawling to modify the seafloor morphology coexists with high-energy natural processes driving sediment erosion, transport and deposition. Here we show that on upper continental slopes, the reworking of the deep sea floor by trawling gradually modifies the shape of the submarine landscape over large spatial scales. We found that trawling-induced sediment displacement and removal from fishing grounds causes the morphology of the deep sea floor to become smoother over time, reducing its original complexity as shown by high-resolution seafloor relief maps. Our results suggest that in recent decades, following the industrialization of fishing fleets, bottom trawling has become an important driver of deep seascape evolution. Given the global dimension of this type of fishery, we anticipate that the morphology of the upper continental slope in many parts of the world’s oceans could be altered by intensive bottom trawling, producing comparable effects on the deep sea floor to those generated by agricultural ploughing on land.

  2. Flooring for Schools: Unsightly Walkways

    ERIC Educational Resources Information Center

    Baxter, Mark

    2011-01-01

    Many mattress manufacturers recommend that consumers rotate their mattresses at least twice a year to help prevent soft spots from developing and increase the product's life span. It's unfortunate that the same kind of treatment can't be applied to flooring for schools, such as carpeting, especially in hallways. Being able to flip or turn a carpet…

  3. Laparoscopic hepatectomy is theoretically better than open hepatectomy: preparing for the 2nd International Consensus Conference on Laparoscopic Liver Resection.

    PubMed

    Wakabayashi, Go; Cherqui, Daniel; Geller, David A; Han, Ho-Seong; Kaneko, Hironori; Buell, Joseph F

    2014-10-01

    Six years have passed since the first International Consensus Conference on Laparoscopic Liver Resection was held. This comparatively new surgical technique has evolved since then and is rapidly being adopted worldwide. We compared the theoretical differences between open and laparoscopic liver resection, using right hepatectomy as an example. We also searched the Cochrane Library using the keyword "laparoscopic liver resection." The papers retrieved through the search were reviewed, categorized, and applied to the clinical questions that will be discussed at the 2nd Consensus Conference. The laparoscopic hepatectomy procedure is more difficult to master than the open hepatectomy procedure because of the movement restrictions imposed upon us when we operate from outside the body cavity. However, good visibility of the operative field around the liver, which is located beneath the costal arch, and the magnifying provide for neat transection of the hepatic parenchyma. Another theoretical advantage is that pneumoperitoneum pressure reduces hemorrhage from the hepatic vein. The literature search turned up 67 papers, 23 of which we excluded, leaving only 44. Two randomized controlled trials (RCTs) are underway, but their results are yet to be published. Most of the studies (n = 15) concerned short-term results, with some addressing long-term results (n = 7), cost (n = 6), energy devices (n = 4), and so on. Laparoscopic hepatectomy is theoretically superior to open hepatectomy in terms of good visibility of the operative field due to the magnifying effect and reduced hemorrhage from the hepatic vein due to pneumoperitoneum pressure. However, there is as yet no evidence from previous studies to back this up in terms of short-term and long-term results. The 2nd International Consensus Conference on Laparoscopic Liver Resection will arrive at a consensus on the basis of the best available evidence, with video presentations focusing on surgical techniques and the publication

  4. CO2 dynamics in nested catchments: a longitudinal perspective from soil to 1st and 2nd order streams

    NASA Astrophysics Data System (ADS)

    Johnson, M. S.; Lehmann, J.; Riha, S. J.; Couto, E. G.

    2005-12-01

    Fluxes of CO2 from terrestrial to aquatic environments were investigated in a nested catchment study in the seasonally-dry southern Amazon. Dissolved CO2 concentrations in groundwater springs, four 1st order streams and one 2nd order stream were determined via routine sampling and in-situ monitoring. CO2 concentrations were monitored in the soil atmosphere to 8m. Belowground, the seasonal trend in soil CO2 concentrations at depth lagged that of seasonal water table dynamics, with peak concentrations (8.7% CO2 vol/vol at 4m) occurring one month after maximum water table height, indicating a shift in root respiration and plant water uptake to deeper soil layers during the dry season. Peak dissolved CO2 concentrations in springs and streams lagged the soil CO2 maximum by an additional month. During storm events, streamflow CO2 concentrations were found to decrease initially, reflecting the initial contribution of low-CO2 direct precipitation and surface runoff. Streamwater CO2 then increased as the contribution of pre-event water to storm flow increased. Dissolved CO2 in springs was also found to increase during storm events. Diurnal fluctuations in dissolved CO2 of springs were also observed, indicating the connectivity of the biosphere, pedosphere and hydrosphere for headwater catchments. The dissolved CO2 concentration within 1st order streams decreases rapidly downstream from stream sources, with spring CO2 concentration 3.3 times that at headwater catchment outlets. This initial outgassing of CO2 within 1st order streams was found to be accompanied by a corresponding increase in the pH of stream water. However, dissolved CO2 concentrations were not found to be significantly different between 1st and 2nd order streams. This suggests a discontinuity between some processes at the terrestrial-aquatic interface in headwater catchments and those of larger-order watersheds.

  5. Directional fidelity of nanoscale motors and particles is limited by the 2nd law of thermodynamics--via a universal equality.

    PubMed

    Wang, Zhisong; Hou, Ruizheng; Efremov, Artem

    2013-07-21

    Directional motion of nanoscale motors and driven particles in an isothermal environment costs a finite amount of energy despite zero work as decreed by the 2nd law, but quantifying this general limit remains difficult. Here we derive a universal equality linking directional fidelity of an arbitrary nanoscale object to the least possible energy driving it. The fidelity-energy equality depends on the environmental temperature alone; any lower energy would violate the 2nd law in a thought experiment. Real experimental proof for the equality comes from force-induced motion of biological nanomotors by three independent groups - for translational as well as rotational motion. Interestingly, the natural self-propelled motion of a biological nanomotor (F1-ATPase) known to have nearly 100% energy efficiency evidently pays the 2nd law decreed least energy cost for direction production.

  6. How Are Pelvic Floor Disorders Diagnosed?

    MedlinePlus

    ... Information Clinical Trials Resources and Publications How are pelvic floor disorders diagnosed? Skip sharing on social media links ... fee ). This test is used to evaluate the pelvic floor and rectum while the patient is having a ...

  7. Raise the Floor When Remodeling Science Labs

    ERIC Educational Resources Information Center

    Nation's Schools, 1972

    1972-01-01

    A new remodeling idea adopts the concept of raised floor covering gas, water, electrical, and drain lines. The accessible floor has removable panels set into an adjustable support frame 24 inches above a concrete subfloor. (Author)

  8. Hospital Room Floors May Harbor 'Superbugs'

    MedlinePlus

    ... fullstory_163886.html Hospital Room Floors May Harbor 'Superbugs' But that area often overlooked when it comes ... Hospital room floors may be more of a "superbug" threat than many hospital staffers realize, new research ...

  9. Sea-Floor Spreading and Transform Faults

    ERIC Educational Resources Information Center

    Armstrong, Ronald E.; And Others

    1978-01-01

    Presents the Crustal Evolution Education Project (CEEP) instructional module on Sea-Floor Spreading and Transform Faults. The module includes activities and materials required, procedures, summary questions, and extension ideas for teaching Sea-Floor Spreading. (SL)

  10. Detection of 1st- and 2nd-order temporal-envelope cues in a patient with left superior cortical damage.

    PubMed

    Füllgrabe, Christian; Maillet, Didier; Moroni, Christine; Belin, Catherine; Lorenzi, Christian

    2004-06-01

    This psychophysical study explores the extent to which the auditory cortex is necessary for various aspects of temporal-envelope perception, that is, perception of the slow temporal modulations in amplitude known to be crucial for sound identification. The ability to detect 1st- and 2nd-order sinusoidal amplitude modulation (AM) is evaluated in a single patient showing left-hemisphere damage encroaching the primary and secondary auditory cortices. Here, 1st- and 2nd-order AM refer to (1) sinusoidal variation in the amplitude of a 2 kHz pure tone, and (2) sinusoidal variation in the depth of a 64 Hz AM applied to the 2 kHz pure tone, respectively. The results replicate previous findings by showing that damage to the left auditory cortex results in a selective deficit in auditory sensitivity to the lowest 1St-order AM (i.e., 1st-order AM frequencies < 16 Hz). Moreover, a dissociation is apparent between the ability to detect 1st- and 2nd-order temporal-envelope cues. The patient shows poorer than normal ability to detect 2nd-order AM at low frequencies ranging from 4-23 Hz, but normal ability to detect the high (64 Hz) 1st-order AM carrying these 2nd-order modulations. This result indicates that damage to the left primary and secondary auditory cortices affects the ability to detect temporal variations in the local properties of sounds(such as AM depth). It is also consistent with the idea that, as in vision, central nonlinear mechanisms are involved in the computation of such local (or 2nd-order) temporal properties.

  11. Design issues for floor control protocols

    NASA Astrophysics Data System (ADS)

    Dommel, Hans-Peter; Garcia-Luna-Aceves, Jose J.

    1995-03-01

    Floor control allows users of networked multimedia applications to remotely share resources like cursors, data views, video and audio channels, or entire applications without access conflicts. Floors are mutually exclusive permissions, granted dynamically to collaborating users, mitigating race conditions and guaranteeing fair and deadlock- free resource access. Although floor control is an early concept within computer-supported cooperative work, no framework exists and current floor control mechanisms are often limited to simple objects. While small-scale collaboration can be facilitated by social conventions, the importance of floors becomes evident for large-scale application sharing and teleconferencing orchestration. In this paper, the concept of a scalable session protocol is enhanced with floor control. Characteristics of collaborative environments are discussed, and session and floor control are discerned. The system's and user's requirements perspectives are discussed, including distributed storage policies, packet structure and user-interface design for floor presentation, manipulation, and triggering conditions for floor migration. Interaction stages between users, and scenarios of participant withdrawal, late joins, and establishment of subgroups are elicited with respect to floor generation, bookkeeping, and passing. An API is proposed to standardize and integrate floor control among shared applications. Finally, a concise classification for existing systems with a notion of floor control is introduced.

  12. 14 CFR 25.793 - Floor surfaces.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Floor surfaces. 25.793 Section 25.793 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS... Floor surfaces. The floor surface of all areas which are likely to become wet in service must have...

  13. 49 CFR 38.59 - Floor surfaces.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 1 2010-10-01 2010-10-01 false Floor surfaces. 38.59 Section 38.59 Transportation Office of the Secretary of Transportation AMERICANS WITH DISABILITIES ACT (ADA) ACCESSIBILITY SPECIFICATIONS FOR TRANSPORTATION VEHICLES Rapid Rail Vehicles and Systems § 38.59 Floor surfaces. Floor...

  14. 36 CFR 1192.59 - Floor surfaces.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false Floor surfaces. 1192.59 Section 1192.59 Parks, Forests, and Public Property ARCHITECTURAL AND TRANSPORTATION BARRIERS COMPLIANCE... Rail Vehicles and Systems § 1192.59 Floor surfaces. Floor surfaces on aisles, places for standees,...

  15. The Secrets of Effective Floor Care.

    ERIC Educational Resources Information Center

    Michels, Ed

    2002-01-01

    Discusses the importance of staff training and a maintenance program to the care of hard floors. Describes four key features to look for in a computer-based training program and types of floor pads and matting used to keep flooring clean. (EV)

  16. TINY FEET NO TREAT TO FLOORS.

    ERIC Educational Resources Information Center

    SMALLEY, DAVE E.

    A DISCUSSION OF FLOOR MAINTENANCE AND CARE INTERMS OF BROKEN, WARPED, AND OTHERWISE DAMAGED CONDITIONS WHICH OFTEN REQUIRE REPLACEMENTS GIVES SUGGESTIONS FOR VARIOUS TYPES OF FLOORING MATERIAL. WOOD FLOOR CONDITIONS MAY INCLUDE--(1) CUPPED BOARDS, (2) BUCKLING BOARDS, AND (3) BROKEN BOARDS. A DETAILED DISCUSSION IS GIVEN OF METHODS FOR REMOVING…

  17. Effects of different floor types and levels of washing of waterers on broiler performance and bacteria count of drinking water.

    PubMed

    Andrews, L D; Stamps, L K; Moore, R W; Newberry, L A

    1993-07-01

    The objective of the present experiment was to determine the effect of different flooring materials and washing of waterers on broiler performance. The floor treatments were 1) black, plastic-coated expanded metal, relatively rigid (B); 2) white plastic, semi-rigid, with rectangular openings (WR); 3) white plastic, semi-rigid, with square openings (WS); and 4) 3 cm of rice hull litter (C). One hanging waterer was placed in each pen. Wash treatments were 1) trough and bell washed every Monday, Wednesday, and Friday (AW); 2) wash trough only on Monday, Wednesday, and Friday (TW); and 3) the waterers were never washed after the 2nd wk (NW). Broilers reared on C has significantly lower BW than those broilers on B floors. Broilers reared on the B and WS floors had significantly higher breast blister scores and percentage of birds with blisters than broilers reared on C floors. Broilers reared on C had lower enlarged feather follicle scores than those reared on all raised floors and a lower percentage of enlarged feather follicles than those broilers reared on WS or WR floors. Broilers reared on WS+TW had significantly better feed conversion than WS+AW, B+TW, and B+AW treatments. Broilers reared on WR+TW treatment were significantly higher in breast blister score than broilers reared on WR+AW, C+TW, and C+AW treatments. Broilers reared on C+TW and C+AW treatments were significantly lower in breast blister score except for broilers reared on C+NW, WR+AW, and WS+AW treatments. Broilers reared on C+NW treatment were significantly lower in enlarged feather follicle score than those broilers reared on B+TW, WR+AW, and WS+NW treatments.(ABSTRACT TRUNCATED AT 250 WORDS)

  18. Physics and Industrial Development - Proceedings of the 2nd International Conference on Physics and Industrial Development

    NASA Astrophysics Data System (ADS)

    Gazzinelli, R.; Moreira, R. L.; Rodrigues, W. N.

    1997-04-01

    Fluorescence Detector in Biological Sciences and Chemistry * Quality Assessment of Solder Bonds of Printed Circuit Boards by Metallography * Observation of InAs Nanostructures on (100)-GaAs Substrate with Atomic Force Microscopy * In Situ Observations By Atomic Force Microscopy of Corrosion of An Aluminium Film in a Solution of HCl * Atomic Force Microscopy of Metallurgical Interactions in Integrated Circuit Contacts * Atomic Force Microscopy of Microcavity Semiconductor Devices * Characterization of the Emitted Air Particies By Steel Industries * A Comparative Study of the Anodic Behavior of Duplex Stainless Steels - Din 1.4462-In Synthetic Sea-water * Study of the Corrosion Resistance of Duplex Stainless Steels in Solutions Containing Chlorides, Compared with other Stainless Steels * Development of New Materials and Devices * Development of the Electronic Signal in Proportional Detectors * Development of a Portable Ultrasound Equipment for Backfat Evaluation of Live Pigs * Thermal Barrier Coatings by Plasma Spraying * Scaling in Fragmentation Phenomena * A Study of Sn:In2O3 (ITO)/CuInSe2 Heterojunction for Solar Energy Applications * Organising a Ceramic Powder Shape Electronic Database * Feasibility of a Mixer Using the Negative Resistance of a SNS Junction * Characteristics of v-SiO2 Melted in Refractory Metal Furnace * Lasers for Industrial and Medical Applications * Portable Cat Scanner Applied to Collapsible Soil Studies * Experiments with Slip Casting of Fine Ceramics and v-SiO2 * R2Fe17 Halides: The Birth of a Material for Potential Hard Magnetic Applications * Computerized System for Embryos Freezing Protocols Development * Ferroelectric Parent Materials as Possible High-Tc Superconductors: High Temperature Magnetic and Electric Properties of Modified BNN and SBN * CVD Diamond: Emerging Technology for Many Applications * Development of New Techniques and Processes * Application of Mechanical Relaxation Spectroscopy to the Development of Low Carbon Steels

  19. [Surgical dilemmas. Sinus floor elevation].

    PubMed

    ten Bruggenkate, C M; Schulten, E A J M; Zijderveld, S A

    2008-12-01

    Limited alveolar bone height prevents the placement of dental implants. Sinus floor elevation is an internal augmentation of the maxillary sinus that allows implants to be placed. The principle of this surgical procedure is the preparation of a 'top hinge door', that is raised together with the Schneiderian membrane in the cranial direction. The space which created under this lid is filled with a bone transplant. Autogenous bone is the standard transplant material, despite the fact that a second surgery site is necessary. Under certain circumstances bone substitutes can be used, with a longer healing phase. If sufficient alveolar bone height is available to secure implant stability, simultaneous implantation and sinus floor elevation are possible. Considering the significant anatomical variation in the region of the maxillary sinus, a sound knowledge of the anatomy is of great importance.

  20. Obesity and pelvic floor dysfunction.

    PubMed

    Ramalingam, Kalaivani; Monga, Ash

    2015-05-01

    Obesity is associated with a high prevalence of pelvic floor disorders. Patients with obesity present with a range of urinary, bowel and sexual dysfunction problems as well as uterovaginal prolapse. Urinary incontinence, faecal incontinence and sexual dysfunction are more prevalent in patients with obesity. Uterovaginal prolapse is also more common than in the non-obese population. Weight loss by surgical and non-surgical methods plays a major role in the improvement of these symptoms in such patients. The treatment of symptoms leads to an improvement in their quality of life. However, surgical treatment of these symptoms may be accompanied by an increased risk of complications in obese patients. A better understanding of the mechanism of obesity-associated pelvic floor dysfunction is essential.

  1. Roles of doping ions in afterglow properties of blue CaAl2O4:Eu2+,Nd3+ phosphors

    NASA Astrophysics Data System (ADS)

    Wako, A. H.; Dejene, B. F.; Swart, H. C.

    2014-04-01

    Eu2+ doped and Nd3+ co-doped calcium aluminate (CaAl2O4:Eu2+,Nd3+) phosphor was prepared by a urea-nitrate solution combustion method at furnace temperatures as low as 500 °C. The produced CaAl2O4:Eu2+,Nd3+ powder was investigated in terms of phase composition, morphology and luminescence by X-Ray diffraction (XRD), Scanning Electron Microscope (SEM), Fourier Transform Infra Red spectroscopy (FTIR) and Photoluminescence (PL) techniques respectively. XRD analysis depicts a dominant monoclinic phase that indicates no change in the crystalline structure of the phosphor with varying concentration of Eu2+ and Nd3+. SEM results show agglomerates with non-uniform shapes and sizes with a number of irregular network structures having lots of voids and pores. The Energy Dispersive X-ray Spectroscopy (EDS) and (FTIR) spectra confirm the expected chemical components of the phosphor. PL measurements indicated one broadband excitation spectra from 200 to 300 nm centered around 240 nm corresponding to the crystal field splitting of the Eu2+ d-orbital and an emission spectrum in the blue region with a maximum on 440 nm. This is a strong indication that there was dominantly one luminescence center, Eu2+ which represents emission from transitions between the 4f7 ground state and the 4f6-5d1 excited state configuration. High concentrations of Eu2+ and Nd3+ generally reduce both intensity and lifetime of the phosphor powders. The optimized content of Eu2+ is 1 mol% and for Nd3+ is 1 mol% for the obtained phosphors with excellent optical properties. The phosphor also emits visible light at around 587 and 616 nm. Such emissions can be ascribed to the 5D0-7F1 and 5D0-7F2 intrinsic transition of Eu3+ respectively. The decay characteristics exhibit a significant rise in initial intensity with increasing Eu2+ doping concentration while the decay time increased with Nd3+ co-doping. The observed afterglow can be ascribed to the generation of suitable traps due to the presence of the Nd3

  2. Dynamics of the properties of steppe paleosols of the Sarmatian time (2nd century BC-4th century AD) in relation to secular variations in climatic humidity

    NASA Astrophysics Data System (ADS)

    Demkin, V. A.; Zolotareva, B. N.; Demkina, T. S.; Khomutova, T. E.; Kashirskaya, N. N.; El'Tsov, M. V.; Udal'Tsov, S. N.

    2012-02-01

    Paleosols buried under kurgans of the Early (2nd-1st centuries BC), Middle (1st-2nd centuries AD) and Late (2nd-IV centuries AD) Sarmatian epochs were studied in dry steppes and desert steppes of the Lower Volga region (the Privolzhskaya and Ergeni Uplands and the Caspian Lowland). It was found that temporal variations in the morphological, chemical, microbiological, and magnetic properties of the paleosols in the interval of 2200-1600 BP were characterized by the cyclic pattern related to secular dynamics of climatic humidity with changes in the mean annual precipitation of ±30-50 mm. These climate changes did not transform chestnut paleosols and paleosolonetzes at the type or subtype taxonomic levels. However, they led to certain changes in the humus, carbonate, and salt profiles of the soils; in the character of solonetzic horizon B1; and in the state of microbial communities. According to these data, the Sarmatian time was characterized by alternation of micropluvial and microarid stages lasting fro about 100-200 years. In particular, the stages of humidization were observed in the 1st century BC-1st century AD and in the 4th century AD; the most arid conditions were observed in the second half of the 2nd and the first half of the 3rd century AD.

  3. Experimental observations on the response of 1(st) and 2(nd) order fibre optic long period grating coupling bands to the deposition of nanostructured coatings.

    PubMed

    James, Stephen W; Cheung, C S; Tatam, Ralph P

    2007-10-01

    The sensitivity of attenuation bands corresponding to the 2(nd) order coupling to cladding modes by a fibre optic long period grating (LPG) to the deposition of nanostructured coatings is investigated and compared with that of the 1(st) order coupling. The experimental observations support previously reported theoretical descriptions of LPGs with nanoscale coatings.

  4. Research and Prediction of the Application of Multimedia Teaching Aid in Teaching Technical Education on the 2nd Level of Primary Schools

    ERIC Educational Resources Information Center

    Stebila, Ján

    2011-01-01

    The purpose and the main aim of the pedagogic experiment were to practically verify the success of Multimedia Teaching Aid (MTA) in conditions of primary schools. We assumed that the use of our multimedia teaching aid in teaching technical education on the 2nd level of primary schools would significantly affect the level of knowledge of pupils…

  5. 2nd dimensional GC-MS analysis of sweat volatile organic compounds prepared by solid phase micro-extraction.

    PubMed

    Choi, Mi-Jung; Oh, Chang-Hwan

    2014-01-01

    The characteristics of an individual's odor from sweat, breath and skin provide important information for criminal tracking in field of forensic science. Solid phase micro-extraction gas chromatography/mass spectrometry (SPME-GC/MS) was used to determine human sweat volatile organic compounds (VOCs) profiles. The mass spectrometric analysis (with electron impact mode) followed by 2nd dimensional separation with two different GC columns (one polar and one relatively nonpolar) connected in parallel were used to identify the 574 compounds from sweat samples. The components included alcohols, aldehydes, aliphatics/aromatics, carboxylic acids, esters, ketones, and other organic compounds (amides/amines, thio/thioesters, oxide, sulfides, nitro compounds). Of these compounds, 1-tridecanol, 1,3-bis(1,1-dimethyl ethyl)-benzene, 4,4'-(1-methylethylidene) bis-phenol and 7-acetyl-6-ethyl-1,1,4,4,-tetramethyl-tetraline were common components in all donor's sweat volatile samples. Age-related specific compounds were also detected. The results suggest that characteristic volatile profiles of human sweat emanations could provide the valuable information to forensic scientists.

  6. RF SOI CMOS technology on 1st and 2nd generation trap-rich high resistivity SOI wafers

    NASA Astrophysics Data System (ADS)

    Kazemi Esfeh, B.; Makovejev, S.; Basso, Didier; Desbonnets, Eric; Kilchytska, V.; Flandre, D.; Raskin, J.-P.

    2017-02-01

    In this work three different types of UNIBOND™ Silicon-on-Insulator (SOI) wafers including one standard HR-SOI and two types of trap-rich high resistivity HR-SOI substrates named enhanced signal integrity high resistivity silicon-on-insulator (eSI HR-SOI) provided by SOITEC are studied and compared. The DC and RF performances of these wafers are compared by means of passive and active devices such as coplanar waveguide (CPW) lines, crosstalk- and noise injection-structures as well as partially-depleted (PD) SOI MOSFETs. It is demonstrated that by employing enhanced signal integrity high resistivity silicon-on-insulator (eSI HR-SOI) compared to HR-SOI wafer, a reduction of 24 dB is measured on both generations of trap-rich HR-SOI for 2nd harmonics. Furthermore, it is shown that in eSI HR-SOI, digital substrate noise is effectively reduced compared with HR-SOI. Purely capacitive behavior of eSI HR-SOI is demonstrated by crosstalk structure. Reduction of self-heating effect in the trap-rich HR-SOI with thinner BOX is finally studied.

  7. Explicit formulas for 2nd-order driving terms due to sextupoles and chromatic effects of quadrupoles.

    SciTech Connect

    Wang, C-X. )

    2012-04-25

    Optimization of nonlinear driving terms have become a useful tool for designing storage rings, especially modern light sources where the strong nonlinearity is dominated by the large chromatic effects of quadrupoles and strong sextupoles for chromaticity control. The Lie algebraic method is well known for computing such driving terms. However, it appears that there was a lack of explicit formulas in the public domain for such computation, resulting in uncertainty and/or inconsistency in widely used codes. This note presents explicit formulas for driving terms due to sextupoles and chromatic effects of quadrupoles, which can be considered as thin elements. The computation is accurate to the 4th-order Hamiltonian and 2nd-order in terms of magnet parameters. The results given here are the same as the APS internal note AOP-TN-2009-020. This internal nte has been revised and published here as a Light Source Note in order to get this information into the public domain, since both ELEGANT and OPA are using these formulas.

  8. 1st and 2nd order Raman scattering from n-Graphene Layer (nGL) Films on Silicon Substrates.

    NASA Astrophysics Data System (ADS)

    Gupta, Awnish; Chen, Gugang; Eklund, Peter

    2007-03-01

    Results of room temperature Raman scattering experiments on graphene and n-graphene layer films (nGLs) will be presented [1]. We find that the G band at ˜ 1582 cm-1 exhibits an interesting upshift in frequency with 1/n which we tentatively assign to a surface strain phenomenon connected with surface roughness of the substrate and compensated by the increase in stiffness of the nGL with increasing n. Interesting n-specific bands are observed in the ˜1350 cm-1 (or D-band) region which may correlate with deviations from planarity of the nGL. The second order scattering is very interesting and for small n (n<4) the (2D' or G') band intensity at ˜ 2700 cm-1 is actually higher than the first-order G-band scattering. The shape of this band is sensitive to n and thus can be used to identify n without an AFM measurement. Whereas, the 2D' band is sensitive to n, the 2nd order 2G band ˜ 3248 cm-1 is independent of n. These observations will be discussed in terms of the phonon and electronic dispersion of nGLs. 1 A. Gupta, G. Chen, P. Joshi, S. Tadigadapa and P.C. Eklund, `` Raman Scattering from High-Frequency Phonons in Supported n-Graphene Layer Films'' NanoLett (in Press).

  9. Increasing the water temperature of a 2nd order stream reach: Hydraulic aspects of a whole-stream manipulative experiment

    NASA Astrophysics Data System (ADS)

    de Lima, João L. M. P.; Canhoto, Cristina

    2015-04-01

    What will happen when water temperatures of streams increases, due to climate changes or in connection with rapidly changing human systems? Trying to answer to this question a whole-stream manipulative experiment was undertaken, where an increase in water temperature was artificially induced on a 2nd order stream reach. The main objective of this poster is to describe this experiment focusing on the design of the hydraulic system. The system maintained a steady flow while allowing natural variation in abiotic factors and was successfully used to evaluate the effects of warming on a stream ecosystem at several levels of biological organization. A constant flow of stream water was controlled by a hydraulic setup (~22m long; ~1.5m width) subdivided into two independent channels. One channel of the study reach received heated water (~3°C above the other), while the other received water at stream ambient temperature. The warming system maintained a steady gravity controlled flow making use of weirs and valves.

  10. Fabrication of 30 mm long baseline single-layer 2nd-order high- Tc SQUID gradiometer

    NASA Astrophysics Data System (ADS)

    Lee, Soon-Gul; Oh, Soo-Ho; Kang, Chan Seok; Kim, In-Seon

    2007-09-01

    We have designed and fabricated a 30 mm long baseline 2nd-order SQUID gradiometer from a single-layer YBa 2Cu 3O 7 film. The design rule was the same as that of our previous study on short baseline gradiometers. Three linearly aligned 10.2 mm × 10.2 mm pickup loops were coupled directly to a dc SQUID to measure ∂ 2Bz/∂ x2. The device had an overall size of 70.2 mm × 10.6 mm and was patterned from a single layer of YBa 2Cu 3O 7 film on a sapphire substrate by argon ion milling with a photoresist mask. The Josephson element of the SQUID was YBa 2Cu 3O 7 nanobridges formed by focused ion beam writing technique. Balancing of the device was achieved by optimizing the inductance of the center loop. Estimated sensitivity of the gradiometer was ∼1.8 × 10 -10 T/m 2/Hz 1/2, which is equivalent to a field noise of 160 fT/Hz 1/2, for an intrinsic SQUID flux noise of 10 -5 ϕ0/Hz 1/2.

  11. Horizontal transmission of hepatitis B virus amongst British 2nd World War soldiers in South-East Asia.

    PubMed

    Gill, G V; Bell, D R; Vandervelde, E M

    1991-01-01

    Infection with hepatitis B virus (HBV) is much more common in tropical than in temperate countries. Visitors to the tropics are thus at risk from HBV, though the degree of risk, and the routes of infection involved are uncertain. We report serological markers of HBV in two groups of 2nd World War soldiers, who served in the Thai/Burma jungles. The groups comprised 100 ex-prisoners of the Japanese (POW), and 100 Burma Campaign Veterans (BCV). Surface antigen to HBV (HbsAg) was positive in 0% of POW and 2% of BCV (P = not significant). Surface antibody (anti-HBs) and core antibody (anti-HBc) were both positive in 40% POW and 13% BCV (P less than 0.001). Quoted UK prevalence rates for these markers are 0.1% for HBsAg, 1.5% for anti-HBs and 0.7% for anti-HBc. Both groups thus show very high rates of past HBV infection. For the POW there were many possible reasons, including contaminated surgical instruments and needles, blood transfusions, and multiple beatings with common weapons. None of these factors operated significantly for BCV. Malarial transmission was, however, intense in both groups, though more so in POW. The data thus again raise the possibility of horizontal transmission of HBV by biting insects in tropical countries.

  12. [JAN JĘDRZEJEWICZ AND EUROPEAN ASTRONOMY OF THE 2ND HALF OF THE 19TH CENTURY].

    PubMed

    Siuda-Bochenek, Magda

    2015-01-01

    Jan Jędrzejewicz was an amateur astronomer who in the 2nd half of the 19th century created an observation centre, which considering the level of research was comparable to the European ones. Jędrzejewicz settled down in Plonsk in 1862 and worked as a doctor ever since but his greatest passion was astronomy, to which he dedicated all his free time. In 1875 Jędrzejewicz finished the construction of his observatory. He equipped it with basic astronomical and meteorological instruments, then began his observations and with time he became quite skilled in it. Jędrzejewicz focused mainly on binary stars but he also pointed his telescopes at the planets of the solar system, the comets, the Sun, as well as all the phenomena appearing in the sky at that time. Thanks to the variety of the objects observed and the number of observations he stood out from other observers in Poland and took a very good position in the mainstream of the 19th-century astronomy in Europe. Micrometer observations of binary stars made in Płońsk gained recognition in the West and were included in the catalogues of binary stars. Interest in Jędrzejewicz and his observatory was confirmed by numerous references in the English "Nature" magazine.

  13. Gasification. 2nd. ed.

    SciTech Connect

    Christopher Higman; Maarten van der Burgt

    2008-02-15

    This book covers gasification as a comprehensive topic, covering its many uses, from refining, to natural gas, to coal. It provides an overview of commercial processes and covers applications relevant to today's demands. The new edition is expanded and provides more detail on the integration issues for current generation, state-of-the-art Integrated Gasification Combined Cycles (IGCC); CO{sub 2} capture in the IGCC context addressing the issues of pre-investment and retrofitting as well as defining what the term 'CO{sub 2} capture ready' might mean in practice; issues of plant reliability, availability and maintainability (RAM) including as evaluation of feedback from existing plants; implementation of fuel cell technology in IGCC concepts. Contents are: Introduction; The Thermodynamics of Gasification; The Kinetics of Gasification and Reactor Theory; Feedstocks and Feedstock Characteristics; Gasification Processes; Practical Issues; Applications; Auxiliary Technologies; Economics, environmental, and Safety Issues; Gasification and the Future. 5 apps.

  14. Universe (2nd edition)

    SciTech Connect

    Kaufmann, W.J. III

    1988-01-01

    A general text on astronomy is presented. The foundations of the science are reviewed, including descriptions of naked-eye observatons of eclipses and planetary motions and such basic tools as Kepler's laws, the fundamental properties of light, and the optics of telescopes. The formation of the solar system is addressed, and the planets and their satellites are discussed individually. Solar science is treated in detail. Stellar evolution is described chronologically from birth to death. Molecular clouds, star clusters, nebulae, neutron stars, black holes, and various other phenomena that occur in the life of a star are examined in the sequence in which they naturally occur. A survey of the Milky Way introduces galactic astronomy. Quasars and cosmology are addressed, including the most recent developments in research. 156 references.

  15. Scaling on a limestone flooring

    NASA Astrophysics Data System (ADS)

    Carmona-Quiroga, P. M.; Blanco-Varela, M. T.; Martínez-Ramírez, S.

    2012-04-01

    Natural stone can be use on nearly every surface, inside and outside buildings, but decay is more commonly reported from the ones exposed to outdoor aggressively conditions. This study instead, is an example of limestone weathering of uncertain origin in the interior of a residential building. The stone, used as flooring, started to exhibit loss of material in the form of scaling. These damages were observed before the building, localized in the South of Spain (Málaga), was inhabited. Moreover, according to the company the limestone satisfies the following European standards UNE-EN 1341: 2002, UNE-EN 1343: 2003; UNE-EN 12058: 2004 for floorings. Under these circumstances the main objective of this study was to assess the causes of this phenomenon. For this reason the composition of the mortar was determined and the stone was characterized from a mineralogical and petrological point of view. The last material, which is a fossiliferous limestone from Egypt with natural fissure lines, is mainly composed of calcite, being quartz, kaolinite and apatite minor phases. Moreover, under different spectroscopic and microscopic techniques (FTIR, micro-Raman, SEM-EDX, etc) samples of the weathered, taken directly from the buildings, and unweathered limestone tiles were examined and a new mineralogical phase, trona, was identified at scaled areas which are connected with the natural veins of the stone. In fact, through BSE-mapping the presence of sodium has been detected in these veins. This soluble sodium carbonate would was dissolved in the natural waters from which limestone was precipitated and would migrate with the ascendant capilar humidity and crystallized near the surface of the stone starting the scaling phenomenon which in historic masonry could be very damaging. Therefore, the weathering of the limestone would be related with the hygroscopic behaviour of this salt, but not with the constructive methods used. This makes the limestone unable to be used on restoration

  16. Crash Tests of Protective Airplane Floors

    NASA Technical Reports Server (NTRS)

    Carden, H. D.

    1986-01-01

    Energy-absorbing floors reduce structural buckling and impact forces on occupants. 56-page report discusses crash tests of energy-absorbing aircraft floors. Describes test facility and procedures; airplanes, structural modifications, and seats; crash dynamics; floor and seat behavior; and responses of anthropometric dummies seated in airplanes. Also presents plots of accelerations, photographs and diagrams of test facility, and photographs and drawings of airplanes before, during, and after testing.

  17. Use of prelecture assignment to enhance learning in pharmacology lectures for the 2nd year medical students

    PubMed Central

    Ahsan, Marya; Mallick, Ayaz Khurram

    2016-01-01

    Objectives: Majority of teaching hours allotted by the Medical Council of India in pharmacology are utilized in the form of didactic lecture. Although these lectures are an excellent tool to deliver the information to a large group of students, it usually ends up as a one-sided teaching session with most students being the passive listeners. To make these lectures interesting and effective, we introduced the students to prelecture assignment (PLA) in the form of clinical case before the delivery of the lecture. Methods: This prospective educational trial was conducted in the Department of Pharmacology with undergraduate medical students in their 2nd year of their professional course. They were divided into two groups of 75 each. Group A was provided the PLA before the lecture. Group B students directly attended the lecture, sans the PLA. Multiple-choice questions-based test was conducted 2 days after the lecture. Students who failed to complete the assignment and were absent from the lecture and test were excluded from the study. Feedback from the students was obtained after the lecture. The scores in the test and responses were compiled and analyzed using Statistical Package for Social Sciences (SPSS) software version 21.0 (SPSS Inc., Chicago, IL, USA). Results were expressed in percentages and as mean ± standard deviation as applicable. P < 0.05 was considered statistically significant. Results: Fifty-six students from Group A and 42 from Group B appeared for the test. The students who were given PLA scored better. They felt more confident in answering and understood the topic better than the students of other group. Conclusion: PLA is a useful teaching-learning tool. The pharmacology lectures are interactive, interesting, and easy to understand with this tool. PMID:28031612

  18. Differences in risk factors for 2nd and 3rd degree hypospadias in the National Birth Defects Prevention Study

    PubMed Central

    in 't Woud, Sander Groen; van Rooij, Iris A.L.M.; van Gelder, Marleen M.H.J.; Olney, Richard S.; Carmichael, Suzan L.; Roeleveld, Nel; Reefhuis, Jennita

    2015-01-01

    Background Hypospadias is a frequent birth defect with three phenotypic subtypes. With data from the National Birth Defects Prevention Study, a large, multi-state, population-based, case-control study, we compared risk factors for second and third degree hypospadias. Methods A wide variety of data on maternal and pregnancy-related risk factors for isolated second and third degree hypospadias was collected via computer-assisted telephone interviews to identify potential etiological differences between the two phenotypes. Logistic regression was used to calculate odds ratios including a random effect by study center. Results In total, 1547 second degree cases, 389 third degree cases, and 5183 male controls were included in our study. Third degree cases were more likely to have a non-Hispanic black or Asian/Pacific Islander mother, be delivered preterm, have a low birth weight, be small for gestational age, and be conceived with fertility treatments than second degree cases and controls. Associations with both second and third degree hypospadias were observed for maternal age, family history, parity, plurality, and hypertension during pregnancy. Risk estimates were generally higher for third degree hypospadias except for family history. Conclusions Most risk factors were associated with both or neither phenotype. Therefore, it is likely that the underlying mechanism is at least partly similar for both phenotypes. However, some associations were different between 2nd and 3rd degree hypospadias, and went in opposite directions for second and third degree hypospadias for Asian/Pacific Islander mothers. Effect estimates for subtypes of hypospadias may be over- or underestimated in studies without stratification by phenotype. PMID:25181604

  19. ENABLE -- A systolic 2nd level trigger processor for track finding and e/[pi] discrimination for ATLAS/LHC

    SciTech Connect

    Klefenz, F.; Noffz, K.H.; Zoz, R. . Lehrstuhl fuer Informatik V); Maenner, R. . Interdisziplinaeres Zentrum fuer Wissenschaftliches Rechnen)

    1994-08-01

    The Enable Machine is a systolic 2nd level trigger processor for the transition radiation detector (TRD) of ATLAS/LHC. It is developed within the EAST/RD-11 collaboration at CERN. The task of the processor is to find electron tracks and to reject pion tracks according to the EAST benchmark algorithm in less than 10[mu]s. Track are identified by template matching in a ([psi],z) region of interest (RoI) selected by a 1st level trigger. In the ([psi],z) plane tracks of constant curvature are straight lines. The relevant lines form mask templates. Track identification is done by histogramming the coincidences of the templates and the RoI data for each possible track. The Enable Machine is an array processor that handles tracks of the same slope in parallel, and tracks of different slope in a pipeline. It is composed of two units, the Enable histogrammer unit and the Enable z/[psi]-board. The interface daughter board is equipped with a HIPPI-interface developed at JINR/-Dubna, and Xilinx 'corner turning' data converter chips. Enable uses programmable gate arrays (XILINX) for histogramming and synchronous SRAMs for pattern storage. With a clock rate of 40 MHz the trigger decision time is 6.5 [mu]s and the latency 7.0 [mu]s. The Enable machine is scalable in the RoI size as well as in the number of tracks processed. It can be adapted to different recognition tasks and detector setups. The prototype of the Enable Machine has been tested in a beam time of the RD6 collaboration at CERN in October 1993.

  20. Interaction between Short-Term Heat Pretreatment and Fipronil on 2nd Instar Larvae of Diamondback Moth, Plutella Xylostella (Linn)

    PubMed Central

    Gu, Xiaojun; Tian, Sufen; Wang, Dehui; Gao, Fei; Wei, Hui

    2010-01-01

    Based on the cooperative virulence index (c.f.) and LC50 of fipronil, the interaction effect between short-term heat pretreatment and fipronil on 2nd instar larvae of diamondback moth (DBM), Plutella xylostella (Linnaeus), was assessed. The results suggested that pretreatment of the tested insects at 30 °C for 2, 4 and 8h could somewhat decrease the toxicity of fipronil at all set concentrations. The LC50 values of fipronil increased after heat pretreatment and c.f. values in all these treatments were below zero. These results indicated that real mortalities were less than theoretical ones and antagonism was found in the treatments of fipronil at 0.39 and 0.78 mg/L after heat pretreatment at 30 °C at 2, 4 and 8 h. However, pretreatment at 30 °C for 12h could increase the toxicity of fipronil at all set concentrations, the LC50 of fipronil decreased after heat pretreatment and c.f. values in all these treatments were above zero, which indicated real mortalities were higher than theoretical ones. Pretreatment of the tested insects at 35 °C for 2, 4, 8 and 12h was found to increase the toxicity of fipronil at all set concentrations which resulted in the decrease of LC50 values of fipronil and c.f. above zero in all treatments with only one exception. Most interactions were assessed as synergism. The results indicated that cooperative virulence index (c.f.) may be adopted in hormetic effect assessment. PMID:20877489

  1. The floor plate: multiple cells, multiple signals.

    PubMed

    Placzek, Marysia; Briscoe, James

    2005-03-01

    One of the key organizers in the CNS is the floor plate - a group of cells that is responsible for instructing neural cells to acquire distinctive fates, and that has an important role in establishing the elaborate neuronal networks that underlie the function of the brain and spinal cord. In recent years, considerable controversy has arisen over the mechanism by which floor plate cells form. Here, we describe recent evidence that indicates that discrete populations of floor plate cells, with characteristic molecular properties, form in different regions of the neuraxis, and we discuss data that imply that the mode of floor plate induction varies along the anteroposterior axis.

  2. Pelvic floor muscle rehabilitation using biofeedback.

    PubMed

    Newman, Diane K

    2014-01-01

    Pelvic floor muscle exercises have been recommended for urinary incontinence since first described by obstetrician gynecologist Dr. Arnold Kegel more than six decades ago. These exercises are performed to strengthen pelvic floor muscles, provide urethral support to prevent urine leakage, and suppress urgency. In clinical urology practice, expert clinicians also teach patients how to relax the muscle to improve bladder emptying and relieve pelvic pain caused by muscle spasm. When treating lower urinary tract symptoms, an exercise training program combined with biofeedback therapy has been recommended as first-line treatment. This article provides clinical application of pelvic floor muscle rehabilitation using biofeedback as a technique to enhance pelvic floor muscle training.

  3. Side Elevation; 1/4 Plans of Floor Framing, Floor Planking, Roof ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Side Elevation; 1/4 Plans of Floor Framing, Floor Planking, Roof Framing and Roof; Longitudinal Section, Cross Section, End Elevation - Eames Covered Bridge, Spanning Henderson Creek, Oquawka, Henderson County, IL

  4. Eastern Floor of Holden Crater

    NASA Technical Reports Server (NTRS)

    2002-01-01

    (Released 15 April 2002) The Science Today's THEMIS image covers territory on the eastern floor of Holden Crater, which is located in region of the southern hemisphere called Noachis Terra. Holden Crater is 154 km in diameter and named after American Astronomer Edward Holden (1846-1914). This image shows a mottled surface with channels, hills, ridges and impact craters. The largest crater seen in this image is 5 km in diameter. This crater has gullies and what appears to be horizontal layers in its walls. The Story With its beautiful symmetry and gullies radially streaming down to the floor, the dominant crater in this image is an impressive focal point. Yet, it is really just a small crater within a much larger one named Holden Crater. Take a look at the context image to the right to see just how much bigger Holden Crater is. Then come back to the image strip that shows the mottled surface of Holden Crater's eastern floor in greater detail, and count how many hills, ridges, channels, and small impact craters can be seen. No perfectly smooth terrain abounds there, that's for sure. The textured terrain of Holden Crater has been particularly intriguing ever since the Mars Orbital Camera on the Mars Global Surveyor spacecraft found evidence of sedimentary rock layers there that might have formed in lakes or shallow seas in Mars' ancient past. This finding suggests that Mars may have been more like Earth long ago, with water on its surface. Holden Crater might even have held a lake long ago. No one knows for sure, but it's an exciting possibility. Why? If water was once on the surface of Mars long enough to form sedimentary materials, maybe it was there long enough for microbial life to have developed too. (Life as we know it just isn't possible without the long-term presence of liquid water.) The question of life on the red planet is certainly tantalizing, but scientists will need to engage in a huge amount of further investigation to begin to know the answer. That

  5. 16. THIRD FLOOR BLDG. 28A, DETAIL CUTOUT IN FLOOR FOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    16. THIRD FLOOR BLDG. 28A, DETAIL CUTOUT IN FLOOR FOR WOOD BLOCK FLOORING LOOKING EAST. - Fafnir Bearing Plant, Bounded on North side by Myrtle Street, on South side by Orange Street, on East side by Booth Street & on West side by Grove Street, New Britain, Hartford County, CT

  6. Abdominal emergencies during pregnancy.

    PubMed

    Bouyou, J; Gaujoux, S; Marcellin, L; Leconte, M; Goffinet, F; Chapron, C; Dousset, B

    2015-12-01

    Abdominal emergencies during pregnancy (excluding obstetrical emergencies) occur in one out of 500-700 pregnancies and may involve gastrointestinal, gynecologic, urologic, vascular and traumatic etiologies; surgery is necessary in 0.2-2% of cases. Since these emergencies are relatively rare, patients should be referred to specialized centers where surgical, obstetrical and neonatal cares are available, particularly because surgical intervention increases the risk of premature labor. Clinical presentations may be atypical and misleading because of pregnancy-associated anatomical and physiologic alterations, which often result in diagnostic uncertainty and therapeutic delay with increased risks of maternal and infant morbidity. The most common abdominal emergencies are acute appendicitis (best treated by laparoscopic appendectomy), acute calculous cholecystitis (best treated by laparoscopic cholecystectomy from the first trimester through the early part of the third trimester) and intestinal obstruction (where medical treatment is the first-line approach, just as in the non-pregnant patient). Acute pancreatitis is rare, usually resulting from trans-ampullary passage of gallstones; it usually resolves with medical treatment but an elevated risk of recurrent episodes justifies laparoscopic cholecystectomy in the 2nd trimester and endoscopic sphincterotomy in the 3rd trimester. The aim of the present work is to review pregnancy-induced anatomical and physiological modifications, to describe the main abdominal emergencies during pregnancy, their specific features and their diagnostic and therapeutic management.

  7. Biological Damage Threshold Induced by Ultrashort Fundamental, 2nd, and 4th Harmonic Light Pulses from a Mode-Locked Nd: Glass Laser.

    DTIC Science & Technology

    1980-12-01

    BY ULTRASHORT FUNDAMENTAL, 2ND, AND 4TH HARMONIC LIGHT PULSES 00 , FROM A MODE-LOCKED Nd:GLASS LASER C Adam P. Bruckner, Ph.D. J. Michael Schurr, Ph.D...Medicine, Aerospace Medical Division, AFSC, Brooks Air Force Base, Texas. Dr. Taboada (USAFSAM/RZL) was the Laboratory Project Scientist-in-Charge. When... TABOADA , Ph.D. /AONN E. PICKERING, M.S. Project Scientist Chief, Radiation Sciences Division ROY L. DEHART Colonel, USAF, MC Commander UNCLASSIFIED S

  8. Learning4Life on the Exhibit Floor

    ERIC Educational Resources Information Center

    Sullivan, Margaret

    2009-01-01

    The exhibit floor is a wealth of knowledge. One can read, view, and listen to information presented in many formats. Somewhere on the exhibit floor there are experts on every topic, ready and waiting for one's questions. But like any research topic, frequently a structured search is required to find the best answers. This article discusses how to…

  9. 9 CFR 91.26 - Concrete flooring.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 9 Animals and Animal Products 1 2011-01-01 2011-01-01 false Concrete flooring. 91.26 Section 91.26... LIVESTOCK FOR EXPORTATION Inspection of Vessels and Accommodations § 91.26 Concrete flooring. (a) Pens aboard an ocean vessel shall have a 3 inch concrete pavement, proportioned and mixed to give 2000...

  10. 9 CFR 91.26 - Concrete flooring.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Concrete flooring. 91.26 Section 91.26... LIVESTOCK FOR EXPORTATION Inspection of Vessels and Accommodations § 91.26 Concrete flooring. (a) Pens aboard an ocean vessel shall have a 3 inch concrete pavement, proportioned and mixed to give 2000...

  11. 9 CFR 91.26 - Concrete flooring.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 9 Animals and Animal Products 1 2014-01-01 2014-01-01 false Concrete flooring. 91.26 Section 91.26... LIVESTOCK FOR EXPORTATION Inspection of Vessels and Accommodations § 91.26 Concrete flooring. (a) Pens aboard an ocean vessel shall have a 3 inch concrete pavement, proportioned and mixed to give 2000...

  12. 9 CFR 91.26 - Concrete flooring.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 9 Animals and Animal Products 1 2013-01-01 2013-01-01 false Concrete flooring. 91.26 Section 91.26... LIVESTOCK FOR EXPORTATION Inspection of Vessels and Accommodations § 91.26 Concrete flooring. (a) Pens aboard an ocean vessel shall have a 3 inch concrete pavement, proportioned and mixed to give 2000...

  13. 9 CFR 91.26 - Concrete flooring.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 9 Animals and Animal Products 1 2012-01-01 2012-01-01 false Concrete flooring. 91.26 Section 91.26... LIVESTOCK FOR EXPORTATION Inspection of Vessels and Accommodations § 91.26 Concrete flooring. (a) Pens aboard an ocean vessel shall have a 3 inch concrete pavement, proportioned and mixed to give 2000...

  14. On-grade insulated panel floor system

    SciTech Connect

    Bjornson, D.; Briscoe, J.; Brown, G.Z.; Fremouw, S.; Kline, J.; Northcutt, D.

    1999-07-01

    The on-grade insulated panel floor system combines floor and foundation to reduce cost, increase energy and structural performance, and provide easy dismantling and recycling upon demolition. The system uses one-sided structural insulated panels (SIPs with one layer of OSB attached to foam insulation), a compacted gravel bed, and engineered lumber for the perimeter beam. Tests show that an on-grade panel floor system of 20 ft by 36 ft (6.1 by 11.0 m) is $895 less expensive and has a 55% better insulating value than an insulated concrete slab, exceeds deflection and flatness criteria for wood and concrete slab floors and supports structural loads in excess of those in residential construction. The flexible nature of the foam and wood may also improve the standing comfort of the floor compared to a concrete slab floor. In addition, the panel and engineered wood components increase the recyclability of the floor. The system is easily adaptable to use over an existing concrete floor.

  15. Lightweight Integrally Armored Floor (LIAF) Ballistic Testing

    DTIC Science & Technology

    2011-03-01

    UHMWPE ), and a mini-core sandwich structure which serves as the walking surface of the floor system (Figure 1). Specimen details are covered in...SIDE Strike Face Backing Plate (walking surface) Ballistic Material ( UHMWPE ) Projectile Lightweight Integrally Armored Floor (LIAF

  16. All-optical 1st- and 2nd-order differential equation solvers with large tuning ranges using Fabry-Pérot semiconductor optical amplifiers.

    PubMed

    Chen, Kaisheng; Hou, Jie; Huang, Zhuyang; Cao, Tong; Zhang, Jihua; Yu, Yuan; Zhang, Xinliang

    2015-02-09

    We experimentally demonstrate an all-optical temporal computation scheme for solving 1st- and 2nd-order linear ordinary differential equations (ODEs) with tunable constant coefficients by using Fabry-Pérot semiconductor optical amplifiers (FP-SOAs). By changing the injection currents of FP-SOAs, the constant coefficients of the differential equations are practically tuned. A quite large constant coefficient tunable range from 0.0026/ps to 0.085/ps is achieved for the 1st-order differential equation. Moreover, the constant coefficient p of the 2nd-order ODE solver can be continuously tuned from 0.0216/ps to 0.158/ps, correspondingly with the constant coefficient q varying from 0.0000494/ps(2) to 0.006205/ps(2). Additionally, a theoretical model that combining the carrier density rate equation of the semiconductor optical amplifier (SOA) with the transfer function of the Fabry-Pérot (FP) cavity is exploited to analyze the solving processes. For both 1st- and 2nd-order solvers, excellent agreements between the numerical simulations and the experimental results are obtained. The FP-SOAs based all-optical differential-equation solvers can be easily integrated with other optical components based on InP/InGaAsP materials, such as laser, modulator, photodetector and waveguide, which can motivate the realization of the complicated optical computing on a single integrated chip.

  17. Hybrid distributed Raman amplification combining random fiber laser based 2nd-order and low-noise LD based 1st-order pumping.

    PubMed

    Jia, Xin-Hong; Rao, Yun-Jiang; Yuan, Cheng-Xu; Li, Jin; Yan, Xiao-Dong; Wang, Zi-Nan; Zhang, Wei-Li; Wu, Han; Zhu, Ye-Yu; Peng, Fei

    2013-10-21

    A configuration of hybrid distributed Raman amplification (H-DRA), that is formed by incorporating a random fiber laser (RFL) based 2nd-order pump and a low-noise laser-diode (LD) based 1st-order pump, is proposed in this paper. In comparison to conventional bi-directional 1st-order DRA, the effective noise figure (ENF) is found to be lower by amount of 0 to 4 dB due to the RFL-based 2nd-order pump, depending on the on-off gain, while the low-noise 1st-order Raman pump is used for compensating the worsened signal-to-noise ratio (SNR) in the vicinity towards the far end of the fiber and avoiding the potential nonlinear impact induced by excess injection of pump power and suppressing the pump-signal relative intensity noise (RIN) transfer. As a result, the gain distribution can be optimized along ultra-long fiber link, due to combination of the 2nd-order RFL and low-noise 1st-order pumping, making the transmission distance be extended significantly. We utilized such a configuration to achieve ultra-long-distance distributed sensing based on Brillouin optical time-domain analysis (BOTDA). A repeater-less sensing distance record of up to 154.4 km with 5 m spatial resolution and ~ ± 1.4 °C temperature uncertainty is successfully demonstrated.

  18. Cloud Occurrence Measurements Over Sea during the 2nd 7 Southeast Asian Studies (7SEAS) Field Campaign in Palawan Archipelago

    NASA Astrophysics Data System (ADS)

    Antioquia, C. T.; Uy, S. N.; Caballa, K.; Lagrosas, N.

    2014-12-01

    Ground based sky imaging cameras have been used to measure cloud cover over an area to aid in radiation budget models. During daytime, certain clouds tend to help decrease atmospheric temperature by obstructing sunrays in the atmosphere. Thus, the detection of clouds plays an important role in the formulation of radiation budget in the atmosphere. In this study, a wide angled sky imager (GoPro Hero 2) was brought on board M/Y Vasco to detect and quantity cloud occurrence over sea during the 2nd 7SEAS field campaign. The camera is just a part of a number of scientific instruments used to measure weather, aerosol chemistry and solar radiation among others. The data collection started during the departure from Manila Bay on 05 September 2012 and went on until the end of the cruise (29 September 2012). The camera was placed in a weather-proof box that is then affixed on a steel mast where other instruments are also attached during the cruise. The data has a temporal resolution of 1 minute, and each image is 500x666 pixels in size. Fig. 1a shows the track of the ship during the cruise. The red, blue, hue, saturation, and value of the pixels are analysed for cloud occurrence. A pixel is considered to "contain" thick cloud if it passes all four threshold parameters (R-B, R/B, R-B/R+B, HSV; R is the red pixel color value, blue is the blue pixel color value, and HSV is the hue saturation value of the pixel) and considered thin cloud if it passes two or three parameters. Fig. 1b shows the daily analysis of cloud occurrence. Cloud occurrence here is quantified as the ratio of the pixels with cloud to the total number of pixels in the data image. The average cloud cover for the days included in this dataset is 87%. These measurements show a big contrast when compared to cloud cover over land (Manila Observatory) which is usually around 67%. During the duration of the cruise, only one day (September 6) has an average cloud occurrence below 50%; the rest of the days have

  19. PREFACE: The 2nd International Conference on Geological, Geographical, Aerospace and Earth Sciences 2014 (AeroEarth 2014)

    NASA Astrophysics Data System (ADS)

    Lumban Gaol, Ford; Soewito, Benfano

    2015-01-01

    The 2nd International Conference on Geological, Geographical, Aerospace and Earth Sciences 2014 (AeroEarth 2014), was held at Discovery Kartika Plaza Hotel, Kuta, Bali, Indonesia during 11 - 12 October 2014. The AeroEarth 2014 conference aims to bring together researchers and engineers from around the world. Through research and development, earth scientists have the power to preserve the planet's different resource domains by providing expert opinion and information about the forces which make life possible on Earth. Earth provides resources and the exact conditions to make life possible. However, with the advent of technology and industrialization, the Earth's resources are being pushed to the brink of depletion. Non-sustainable industrial practices are not only endangering the supply of the Earth's natural resources, but are also putting burden on life itself by bringing about pollution and climate change. A major role of earth science scholars is to examine the delicate balance between the Earth's resources and the growing demands of industrialization. Through research and development, earth scientists have the power to preserve the planet's different resource domains by providing expert opinion and information about the forces which make life possible on Earth. We would like to express our sincere gratitude to all in the Technical Program Committee who have reviewed the papers and developed a very interesting Conference Program as well as the invited and plenary speakers. This year, we received 98 papers and after rigorous review, 17 papers were accepted. The participants come from eight countries. There are four Parallel Sessions and two invited Speakers. It is an honour to present this volume of IOP Conference Series: Earth and Environmental Science (EES) and we deeply thank the authors for their enthusiastic and high-grade contributions. Finally, we would like to thank the conference chairmen, the members of the steering committee, the organizing committee

  20. Male pelvic floor: history and update.

    PubMed

    Dorey, Grace

    2005-08-01

    Our understanding of the male pelvic floor has evolved over more than 2,000 years. Gradually medical science has sought to dispel ancient myths and untruths. The male pelvic floor has many diverse functions. Importantly, it helps to support the abdominal contents, maintains urinary and fecal continence, and plays a major role in gaining and maintaining penile erection. Weakness of the male pelvic floor muscles may cause urinary and fecal incontinence and erectile dysfunction. Function may be restored in each of these areas by a comprehensive pelvic floor muscle training program. Spasm of the pelvic floor muscles may produce pain and require relaxation techniques. Additional research is needed to add further evidence to our knowledge base.

  1. Floor temperature preference of sows at farrowing.

    PubMed

    Phillips; Fraser; Pawluczuk

    2000-03-22

    A preference testing apparatus was used to provide sows with continuous access to three identical farrowing crates, each with a different floor temperature. The concrete floor under each crate contained copper pipe through which temperature-controlled water was circulated to achieve unoccupied floor temperatures of 22 degrees C (+/-3.5), 29 degrees C (+/-1) and 35 degrees C (+/-1). Eighteen sows were tested in the apparatus. Video recording was used to determine sow position from 7 days before farrowing (Days -7 to -1) to 14 days after (Days 1 to 14). On Days -7 to -1, sows showed no significant preference among the three temperatures when selecting a resting area. Once farrowing had begun, there was a significant increase (P<0.01) in the use of the 35 degrees C floor and it became the most preferred resting area for Days 1 to 3. After this interval, use of the 35 degrees C floor declined significantly (P<0.01), and use of the cooler floors increased, resulting in no significant thermal preference during Days 4 to 6. There was a further decline in the use of the 35 degrees C floor after Days 4 to 6 (P<0.01) to the extent that the coolest floor (22 degrees C) became the most preferred from Days 7 to 14. In summary, sows showed a pronounced increase in preference for a warm floor during the 3 days after the start of farrowing. This change in preference may explain how free-living sows select a suitable thermal environment for their young, and why sows try to avoid metal flooring at the time of farrowing.

  2. The Promise and Perils of Emerging Information Technologies. Forum Report. A Report of the Annual Roundtable on Information Technology (2nd, Aspen, Colorado, August 4-8, 1993).

    ERIC Educational Resources Information Center

    Bollier, David

    This report summarizes the roundtable on information technology which brought together leaders from business, government, the non-profit sector, and academia to explore the use of complex adaptive systems as a model for determining information technology's role in both the workplace and diverse societal settings. Topics covered in this document…

  3. Typical Newel Post, First Floor Newel Post, Typical Baluster, Typical ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Typical Newel Post, First Floor Newel Post, Typical Baluster, Typical Nosing, First Floor Stringer Profile, Second Floor Stringer Profile - National Home for Disabled Volunteer Soldiers - Battle Mountain Sanitarium, Treasurer's Quarters, 500 North Fifth Street, Hot Springs, Fall River County, SD

  4. 23. FIRST AND SECOND FLOOR: STAIRCASE AND MAIN ENTRY WAY ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    23. FIRST AND SECOND FLOOR: STAIRCASE AND MAIN ENTRY WAY ON FIRST AND SECOND FLOOR FROM LANDING BETWEEN FIRST AND SECOND FLOOR LOOKING EAST - Masonic Temple, 1111-1119 Eleventh Street, Altoona, Blair County, PA

  5. 5. INTERIOR, CENTRAL BLOCK, FIRST FLOOR, VIEW THROUGH DOORWAY IN ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. INTERIOR, CENTRAL BLOCK, FIRST FLOOR, VIEW THROUGH DOORWAY IN EAST WALL OF NORTHEAST ROOM, SHOWING (EAST) WALL OF EAST ROOM (FIRST AND SECOND FLOORS), AND SECOND FLOOR JOISTS - Bulows Minde Estate House, Bulows Minde, Bulows Minde, St. Croix, VI

  6. 41. Ground level photograph of two floors of skeleton complete ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    41. Ground level photograph of two floors of skeleton complete with 3rd and 4th floors being started,upper floors of county bldg visible - Chicago City Hall, 121 North LaSalle Street, Chicago, Cook County, IL

  7. Dunes in a Crater Floor

    NASA Technical Reports Server (NTRS)

    2003-01-01

    [figure removed for brevity, see original site]

    Released 6 August 2003

    This image shows the floor of a crater just north of the Argyre basin in the southern hemisphere. Dark dunes have been pushed up against the northeastern interior rim of the crater, indicating that the prevailing winds blow from the southwest.

    Image information: VIS instrument. Latitude -35.7, Longitude 324.1 East (35.9 West). 19 meter/pixel resolution.

    Note: this THEMIS visual image has not been radiometrically nor geometrically calibrated for this preliminary release. An empirical correction has been performed to remove instrumental effects. A linear shift has been applied in the cross-track and down-track direction to approximate spacecraft and planetary motion. Fully calibrated and geometrically projected images will be released through the Planetary Data System in accordance with Project policies at a later time.

    NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The Thermal Emission Imaging System (THEMIS) was developed by Arizona State University, Tempe, in collaboration with Raytheon Santa Barbara Remote Sensing. The THEMIS investigation is led by Dr. Philip Christensen at Arizona State University. Lockheed Martin Astronautics, Denver, is the prime contractor for the Odyssey project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena.

  8. Pulsations, interpulsations, and sea-floor spreading.

    NASA Technical Reports Server (NTRS)

    Pessagno, E. A., Jr.

    1973-01-01

    It is postulated that worldwide transgressions (pulsations) and regressions (interpulsations) through the course of geologic time are related to the elevation and subsidence of oceanic ridge systems and to sea-floor spreading. Two multiple working hypotheses are advanced to explain major transgressions and regressions and the elevation and subsidence of oceanic ridge systems. One hypothesis interrelates the sea-floor spreading hypothesis to the hypothesis of sub-Mohorovicic serpentinization. The second hypothesis relates the sea-floor spreading hypothesis to a hypothesis involving thermal expansion and contraction.

  9. Ultrasound Imaging of the Pelvic Floor.

    PubMed

    Stone, Daniel E; Quiroz, Lieschen H

    2016-03-01

    This article discusses the background and appraisal of endoluminal ultrasound of the pelvic floor. It provides a detailed anatomic assessment of the muscles and surrounding organs of the pelvic floor. Different anatomic variability and pathology, such as prolapse, fecal incontinence, urinary incontinence, vaginal wall cysts, synthetic implanted material, and pelvic pain, are easily assessed with endoluminal vaginal ultrasound. With pelvic organ prolapse in particular, not only is the prolapse itself seen but the underlying cause related to the anatomic and functional abnormalities of the pelvic floor muscle structures are also visualized.

  10. Floor Maintenance: Tips from the Experts.

    ERIC Educational Resources Information Center

    O'Connor, Shannon

    2001-01-01

    Presents advice from three university maintenance directors on what they see as the most important parts involved in keeping floors in top shape. Training, staff motivation, flexible scheduling, and proper use of supplies are addressed. (GR)

  11. Floor Fractured Craters around Syrtis Major, Mars

    NASA Astrophysics Data System (ADS)

    Bamberg, M.; Jaumann, R.; Asche, H.

    2012-04-01

    Craters around Syrtis Major are eroded and/or refilled. Syrtis Major is one of the large Hesperian-aged volcanic regions on Mars. Basaltic deposits originating from nearby Syrtis Major cover the floor of impact craters. In particular some craters exhibit a fractured floor. Floor Fractured Craters can be divided in types. The grade of erosion and the geologic process, which formed the crater, can be different. Type 1: Crater floor affected by pit chains or narrow crevices which are sometimes discontinuous. Type 2: More developed and dense networks of crevices as type 1. Crevices are wide and deep enough to be detected. A circular moat starts to develop as crevices concentrate along the rim. Type 3: Mainly distinguished from type 2 by the presence of a fully developed circular moat. The flat central part is divided into several blocks by crevices. Type 4: They show also a continuous moat along the rim but the central part consists of many flat-top blocks and small conical mounds. Type 5: Crater floor has many mounds of irregular sizes, but the flattop blocks are absent. It should be noted that the knobby surface shows typical characteristics of chaotic terrains and could be alternatively classified as such. Type 6: Crater without a circular moat, crevices are not fully developed, flat-top blocks are present. Fractured floor could have been reshaped through geologic processes. Floor fractured craters can be found in three different areas. The first area is located in the south-eastern part of Syrtis Major, bordering to the highlands. Volcanic features like lava flow fronts, lava flows and wrinkle ridges dominate this region. The crater floor is separated in sharp-edged plates and the interior seems to be flooded by basaltic material. The second area is in the north of Syrtis Major and transcend to the chaotic terrain further north. Near the martian dichotomy boundary fluvial activity was the decisive process. The crater rims are highly eroded, channels are cutting

  12. Late extrusion of alloplastic orbital floor implants.

    PubMed

    Brown, A E; Banks, P

    1993-06-01

    Complications following the use of alloplastic orbital floor implants are well documented but it is not widely recognised that these can occur many years after initial treatment. Three patients who presented with late extrusion of an implant through the facial skin are reported. This complication occurred 10, 16 and 17 years respectively after treatment of the orbital floor fracture. The tissue reaction to silicone rubber and Teflon inplants is reviewed and the possible cause for this late complication is discussed.

  13. [Epidermoid cyst of the mouth floor].

    PubMed

    Sanjuán Rodríguez, S; Morán Penco, J M; Ruiz Orpez, A; Santamaria Ossorio, J I; Berchi García, F J

    2003-07-01

    The epidermoid cysts are frequent during childhood, however mouth floor location are very unusual, because of their more difficult diagnosis and therapeutic approach. We present a 5 years old male, symptoms free until a week before, when his parents noticed a well defined mass in the mouth floor. A physical examination leaded to the diagnosis of possible epidermoid cyst. The tumor was excised through an introral approach. A review of different diagnostic means and surgical management are undertaken.

  14. [Functional anatomy of the female pelvic floor: interdisciplinary continence and pelvic floor surgery].

    PubMed

    Muctar, S; Schmidt, W U; Batzill, W; Westphal, J

    2011-07-01

    Knowledge of functional anatomy is a prerequisite for the safe and targeted reconstructive therapy of incontinence and the prolapse syndrome of the female pelvic floor. We illustrate the interaction of muscles and connective tissue of the pelvic floor with anatomical illustrations and demonstrate their impact on the function of the urethra, bladder, vagina, uterus and rectum. Examples for the therapeutic rationale for a surgical reconstruction of the pelvic floor are defined and justified from their functional anatomy.

  15. The Full-Day Kindergarten: Planning and Practicing a Dynamic Themes Curriculum. Early Childhood Education Series. 2nd Edition.

    ERIC Educational Resources Information Center

    Fromberg, Doris Pronin

    Examining problems and questions related to full-day kindergarten, this book deals broadly with early childhood curriculum design and development. It suggests specific step-by-step ways to plan an emergent curriculum based upon integrated, dynamic themes that grow out of children's diverse personal and cultural experiences. Addressed to teachers,…

  16. Characterization of the 1st and 2nd EF-hands of NADPH oxidase 5 by fluorescence, isothermal titration calorimetry, and circular dichroism

    PubMed Central

    2012-01-01

    Background Superoxide generated by non-phagocytic NADPH oxidases (NOXs) is of growing importance for physiology and pathobiology. The calcium binding domain (CaBD) of NOX5 contains four EF-hands, each binding one calcium ion. To better understand the metal binding properties of the 1st and 2nd EF-hands, we characterized the N-terminal half of CaBD (NCaBD) and its calcium-binding knockout mutants. Results The isothermal titration calorimetry measurement for NCaBD reveals that the calcium binding of two EF-hands are loosely associated with each other and can be treated as independent binding events. However, the Ca2+ binding studies on NCaBD(E31Q) and NCaBD(E63Q) showed their binding constants to be 6.5 × 105 and 5.0 × 102 M-1 with ΔHs of -14 and -4 kJ/mol, respectively, suggesting that intrinsic calcium binding for the 1st non-canonical EF-hand is largely enhanced by the binding of Ca2+ to the 2nd canonical EF-hand. The fluorescence quenching and CD spectra support a conformational change upon Ca2+ binding, which changes Trp residues toward a more non-polar and exposed environment and also increases its α-helix secondary structure content. All measurements exclude Mg2+-binding in NCaBD. Conclusions We demonstrated that the 1st non-canonical EF-hand of NOX5 has very weak Ca2+ binding affinity compared with the 2nd canonical EF-hand. Both EF-hands interact with each other in a cooperative manner to enhance their Ca2+ binding affinity. Our characterization reveals that the two EF-hands in the N-terminal NOX5 are Ca2+ specific. Graphical abstract PMID:22490336

  17. ETRA, TRA642. ON BASEMENT FLOOR. IBEAM COLUMNS SUPPORTING CONSOLE FLOOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    ETRA, TRA-642. ON BASEMENT FLOOR. I-BEAM COLUMNS SUPPORTING CONSOLE FLOOR HAVE BEEN SURROUNDED BY CONCRETE IN RECTANGULAR PILLARS. BASEMENT FLOOR IS BEING PREPARED FOR PLACEMENT OF CONCRETE. ABOVE CEILING IS CONSOLE FLOOR, IN WHICH CUT-OUT HAS PRESERVED SPACE FOR REACTOR AND ITS SHIELDING. CIRCULAR FORM IN REACTOR AREA IS CONCRETE FORMING. NOTE VERTICAL CONDUIT AT INTERVALS AROUND REACTOR PITS. INL NEGATIVE NO. 56-1237. Jack L. Anderson, Photographer, 4/17/1956 - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

  18. The current status of research into Attention Deficit Hyperactivity Disorder: Proceedings of the 2nd International Congress on ADHD: From Childhood to Adult Disease.

    PubMed

    Thome, Johannes; Reddy, Duvvoor Prathap

    2009-12-01

    Despite being a devastating psychiatric condition with high prevalence, ADHD has traditionally been widely under-researched, specifically in adult patients. Therefore, the recent surge in scientific projects focusing on ADHD is impressive. By reviewing selected research findings presented at the 2nd International Congress on ADHD, this paper gives an overview about current state-of-the art research in such different areas as diagnosis, classification, epidemiology, differential diagnosis and comorbidity, neurobiology (including molecular genetics, proteomics, neuroimaging and electrophysiology), environmental factors, modelling of ADHD, treatment (pharmacological and non-pharmacological), as well as forensic and social aspects.

  19. Second-order adjoint sensitivity analysis methodology (2nd-ASAM) for computing exactly and efficiently first- and second-order sensitivities in large-scale linear systems: I. Computational methodology

    NASA Astrophysics Data System (ADS)

    Cacuci, Dan G.

    2015-03-01

    This work presents the second-order forward and adjoint sensitivity analysis methodologies (2nd-FSAM and 2nd-ASAM) for computing exactly and efficiently the second-order functional derivatives of physical (engineering, biological, etc.) system responses (i.e., "system performance parameters") to the system's model parameters. The definition of "system parameters" used in this work includes all computational input data, correlations, initial and/or boundary conditions, etc. For a physical system comprising Nα parameters and Nr responses, we note that the 2nd-FSAM requires a total of (Nα2/2 + 3Nα / 2) large-scale computations for obtaining all of the first- and second-order sensitivities, for all Nr system responses. On the other hand, for one functional-type system response, the 2nd-ASAM requires one large-scale computation using the first-level adjoint sensitivity system for obtaining all of the first-order sensitivities, followed by at most Nα large-scale computations using the second-level adjoint sensitivity systems for obtaining exactly all of the second-order sensitivities. Therefore, the 2nd-FSAM should be used when Nr ≫Nα, while the 2nd-ASAM should be used when Nα ≫Nr. The original 2nd-ASAM presented in this work should enable the hitherto very difficult, if not intractable, exact computation of all of the second-order response sensitivities (i.e., functional Gateaux-derivatives) for large-systems involving many parameters, as usually encountered in practice. Very importantly, the implementation of the 2nd-ASAM requires very little additional effort beyond the construction of the adjoint sensitivity system needed for computing the first-order sensitivities.

  20. 76 FR 7098 - Dealer Floor Plan Pilot Program

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-02-09

    ... ADMINISTRATION 13 CFR Parts 120 and 121 Dealer Floor Plan Pilot Program AGENCY: U.S. Small Business... Dealer Floor Plan Pilot Program to make available 7(a) loan guaranties for lines of credit that provide floor plan financing. This new Dealer Floor Plan Pilot Program was created in the Small Business...

  1. 9 CFR 354.222 - Floors, walls, ceilings, etc.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 9 Animals and Animal Products 2 2013-01-01 2013-01-01 false Floors, walls, ceilings, etc. 354.222 Section 354.222 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE... Facilities § 354.222 Floors, walls, ceilings, etc. (a) Floors. All floors in rooms where exposed products...

  2. Carbon dioxide emissions and the overshoot ratio change resulting from the implementation of 2nd Energy Master Plan in South Korea

    NASA Astrophysics Data System (ADS)

    Yeo, M. J.; Kim, Y. P.

    2015-12-01

    The direction of the energy policies of the country is important in the projection of environmental impacts of the country. The greenhouse gases (GHGs) emission of the energy sector in South Korea is very huge, about 600 MtCO2e in 2011. Also the carbon footprint due to the energy consumption contributes to the ecological footprint is also large, more than 60%. Based on the official plans (the national greenhouse gases emission reduction target for 2030 (GHG target for 2030) and the 2nd Energy Master Plan (2nd EMP)), several scenarios were proposed and the sensitivity of the GHG emission amount and 'overshoot ratio' which is the ratio of ecological footprint to biocapacity were estimated. It was found that to meet the GHG target for 2030 the ratio of non-emission energy for power generation should be over 71% which would be very difficult. We also found that the overshoot ratio would increase from 5.9 in 2009 to 7.6 in 2035. Thus, additional efforts are required to reduce the environmental burdens in addition to optimize the power mix configuration. One example is the conversion efficiency in power generation. If the conversion efficiency in power generation rises up 50% from the current level, 40%, the energy demand and resultant carbon dioxide emissions would decrease about 10%. Also the influence on the environment through changes in consumption behavior, for example, the diet choice is expected to be meaningful.

  3. Management of osteoporosis in central and eastern Europe (CEE): conclusions of the "2nd Summit on Osteoporosis-CEE", 21-22 November 2008, Warsaw, Poland.

    PubMed

    Lorenc, Roman S; Resch, Heinrich

    2009-12-01

    In November 2008, the "2nd Summit on Osteoporosis-Central and Eastern Europe (CEE)" was held in Warsaw, Poland. Discussions at this meeting focused on the identification and discussion of diagnostic, preventive, and therapeutic measures used in CEE. Evaluated information was used to identify issues regarding diagnosis and therapy of osteoporosis in these countries to facilitate the subsequent setup of appropriate support and development strategies. The main debate was structured according to the following five subjects: (1) present status and future perspectives for implementation of FRAX(R) into local (CEE) diagnostic algorithms, (2) principles of drug selection in osteoporosis treatment in CEE countries, (3) nonpharmacological interventions in osteoporosis treatment and prophylaxis in CEE countries, (4) treatment benefit evaluation, and (5) cost-effectiveness and evaluation of reimbursement policies in CEE countries. The most important and substantial comments of the delegates are summarized in the present article. The multinational panel of experts with representatives from many CEE countries as well as Austria and Switzerland made the "2nd Summit on Osteoporosis-CEE" a perfect platform to identify issues and needs regarding diagnosis and therapy of osteoporosis as well as the cost-effectiveness of osteoporosis management in CEE countries. The information gained will serve as a basis for the development of strategies to resolve the identified issues at the "3rd Summit on Osteoporosis-CEE" in November 2009.

  4. [Aging-related changes of the female pelvic floor].

    PubMed

    Scheiner, David; Betschart, Cornelia; Perucchini, Daniele

    2010-01-01

    The pelvic floor as lower closure of the abdominal cavity has to withstand the abdominal pressure. Meanwhile, the pelvic floor has to allow physiologic functions like micturition, defecation, sexual function and reproduction. But while pregnancy and vaginal delivery damage the pelvic floor directly, chronic stress like caugh, heavy lifting, or obesity lead to a chronic overstraining of the pelvic floor. Aging, structural changes, and possibly estrogen deficiency have a negative impact on the pelvic floor.

  5. 14 CFR 25.807 - Emergency exits.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... STANDARDS: TRANSPORT CATEGORY AIRPLANES Design and Construction Emergency Provisions § 25.807 Emergency.... Type II exits must be floor-level exits unless located over the wing, in which case they must not have... not more than 20 inches. If the exit is located over the wing, the step-down outside the airplane...

  6. 14 CFR 25.807 - Emergency exits.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... STANDARDS: TRANSPORT CATEGORY AIRPLANES Design and Construction Emergency Provisions § 25.807 Emergency.... Type II exits must be floor-level exits unless located over the wing, in which case they must not have... not more than 20 inches. If the exit is located over the wing, the step-down outside the airplane...

  7. 14 CFR 25.807 - Emergency exits.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... STANDARDS: TRANSPORT CATEGORY AIRPLANES Design and Construction Emergency Provisions § 25.807 Emergency.... Type II exits must be floor-level exits unless located over the wing, in which case they must not have... not more than 20 inches. If the exit is located over the wing, the step-down outside the airplane...

  8. The cleaning of ward floors and the bacteriological study of floor-cleaning machines

    PubMed Central

    Bate, J. G.

    1961-01-01

    Current trends in ward flooring materials and cleaning methods are considered from the point of view of the hospital bacteriologist. Methods employed in an investigation into the bacteriological safety of a number of floor-cleaning machines are described, and some considerations governing the choice of vacuum cleaners for ward use are discussed. Images PMID:13687726

  9. 24. FIFTH FLOOR BLDG. 28B, DETAIL WOOD BLOCK FLOORING LOOKING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    24. FIFTH FLOOR BLDG. 28B, DETAIL WOOD BLOCK FLOORING LOOKING NORTH. - Fafnir Bearing Plant, Bounded on North side by Myrtle Street, on South side by Orange Street, on East side by Booth Street & on West side by Grove Street, New Britain, Hartford County, CT

  10. 23. FIFTH FLOOR BLDG. 28B, DETAIL WOOD BLOCK FLOORING LOOKING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    23. FIFTH FLOOR BLDG. 28B, DETAIL WOOD BLOCK FLOORING LOOKING WEST. - Fafnir Bearing Plant, Bounded on North side by Myrtle Street, on South side by Orange Street, on East side by Booth Street & on West side by Grove Street, New Britain, Hartford County, CT

  11. Total pelvic floor ultrasound for pelvic floor defaecatory dysfunction: a pictorial review.

    PubMed

    Hainsworth, Alison J; Solanki, Deepa; Schizas, Alexis M P; Williams, Andrew B

    2015-01-01

    Total pelvic floor ultrasound is used for the dynamic assessment of pelvic floor dysfunction and allows multicompartmental anatomical and functional assessment. Pelvic floor dysfunction includes defaecatory, urinary and sexual dysfunction, pelvic organ prolapse and pain. It is common, increasingly recognized and associated with increasing age and multiparity. Other options for assessment include defaecation proctography and defaecation MRI. Total pelvic floor ultrasound is a cheap, safe, imaging tool, which may be performed as a first-line investigation in outpatients. It allows dynamic assessment of the entire pelvic floor, essential for treatment planning for females who often have multiple diagnoses where treatment should address all aspects of dysfunction to yield optimal results. Transvaginal scanning using a rotating single crystal probe provides sagittal views of bladder neck support anteriorly. Posterior transvaginal ultrasound may reveal rectocoele, enterocoele or intussusception whilst bearing down. The vaginal probe is also used to acquire a 360° cross-sectional image to allow anatomical visualization of the pelvic floor and provides information regarding levator plate integrity and pelvic organ alignment. Dynamic transperineal ultrasound using a conventional curved array probe provides a global view of the anterior, middle and posterior compartments and may show cystocoele, enterocoele, sigmoidocoele or rectocoele. This pictorial review provides an atlas of normal and pathological images required for global pelvic floor assessment in females presenting with defaecatory dysfunction. Total pelvic floor ultrasound may be used with complementary endoanal ultrasound to assess the sphincter complex, but this is beyond the scope of this review.

  12. ETR, TRA642. FLOOR PLAN UNDER BALCONY ON CONSOLE FLOOR. MOTORGENERATOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    ETR, TRA-642. FLOOR PLAN UNDER BALCONY ON CONSOLE FLOOR. MOTOR-GENERATOR SETS AND OTHER ELECTRICAL EQUIPMENT. PHILLIPS PETROLEUM COMPANY ETR-D-1781, 7/1960. INL INDEX NO. 532-0642-00-706-020384, REV. 1. - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

  13. Lung Emergencies

    MedlinePlus

    ... Emergencies Cardiac Emergencies Eye Emergencies Lung Emergencies Surgeries Lung Emergencies People with Marfan syndrome can be at ... should be considered an emergency. Symptoms of sudden lung collapse (pneumothorax) Symptoms of a sudden lung collapse ...

  14. Anatomical aspects of sinus floor elevations.

    PubMed

    van den Bergh, J P; ten Bruggenkate, C M; Disch, F J; Tuinzing, D B

    2000-06-01

    Inadequate bone height in the lateral part of the maxilla forms a contra-indication for implant surgery. This condition can be treated with an internal augmentation of the maxillary sinus floor. This sinus floor elevation, formerly called sinus lifting, consists of a surgical procedure in which a top hinge door in the lateral maxillary sinus wall is prepared and internally rotated to a horizontal position. The new elevated sinus floor, together with the inner maxillary mucosa, will create a space that can be filled with graft material. Sinus lift procedures depend greatly on fragile structures and anatomical variations. The variety of anatomical modalities in shape of the inner aspect of the maxillary sinus defines the surgical approach. Conditions such as sinus floor convolutions, sinus septum, transient mucosa swelling and narrow sinus may form a (usually relative) contra-indication for sinus floor elevation. Absolute contra-indications are maxillary sinus diseases (tumors) and destructive former sinus surgery (like the Caldwell-Luc operation). The lateral sinus wall is usually a thin bone plate, which is easily penetrated with rotating or sharp instruments. The fragile Schneiderian membrane plays an important role for the containment of the bonegraft. The surgical procedure of preparing the trap door and luxating it, together with the preparation of the sinus mucosa, may cause a mucosa tear. Usually, when these perforations are not too large, they will fold together when turning the trap door inward and upward, or they can be glued with a fibrin sealant, or they can be covered with a resorbable membrane. If the perforation is too large, a cortico-spongious block graft can be considered. However, in most cases the sinus floor elevation will be deleted. Perforations may also occur due to irregularities in the sinus floor or even due to immediate contact of sinus mucosa with oral mucosa. Obstruction of the antro-nasal foramen is, due to its high location, not a

  15. PREFACE: 2nd Russia-Japan-USA Symposium on the Fundamental and Applied Problems of Terahertz Devices and Technologies (RJUS TeraTech - 2013)

    NASA Astrophysics Data System (ADS)

    Karasik, Valeriy; Ryzhii, Viktor; Yurchenko, Stanislav

    2014-03-01

    The 2nd Russia-Japan-USA Symposium 'The Fundamental & Applied Problems of Terahertz Devices & Technologies' (RJUS TeraTech - 2013) Bauman Moscow State Technical University Moscow, Russia, 3-6 June, 2013 The 2nd Russia-Japan-USA Symposium 'The Fundamental & Applied Problems of Terahertz Devices & Technologies' (RJUS TeraTech - 2013) was held in Bauman Moscow State Technical University on 3-6 June 2013 and was devoted to modern problems of terahertz optical technologies. RJUS TeraTech 2013 was organized by Bauman Moscow State Technical University in cooperation with Tohoku University (Sendai, Japan) and University of Buffalo (The State University of New York, USA). The Symposium was supported by Bauman Moscow State Technical University (Moscow, Russia) and Russian Foundation for Basic Research (grant number 13-08-06100-g). RJUS TeraTech - 2013 became a foundation for sharing and discussing modern and promising achievements in fundamental and applied problems of terahertz optical technologies, devices based on grapheme and grapheme strictures, condensed matter of different nature. Among participants of RJUS TeraTech - 2013, there were more than 100 researchers and students from different countries. This volume contains proceedings of the 2nd Russia-Japan-USA Symposium 'The Fundamental & Applied Problems of Terahertz Devices & Technologies'. Valeriy Karasik, Viktor Ryzhii and Stanislav Yurchenko Bauman Moscow State Technical University Symposium chair Anatoliy A Aleksandrov, Rector of BMSTU Symposium co-chair Valeriy E Karasik, Head of the Research and Educational Center 'PHOTONICS AND INFRARED TECHNOLOGY' (Russia) Invited Speakers Taiichi Otsuji, Research Institute of Electrical Communication, Tohoku University, Sendai, Japan Akira Satou, Research Institute of Electrical Communication, Tohoku University, Sendai, Japan Michael Shur, Electrical, Computer and System Engineering and Physics, Applied Physics, and Astronomy, Rensselaer Polytechnic Institute, NY, USA Natasha

  16. A&M. TAN607 floor plans. Shows three floor levels of pool, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    A&M. TAN-607 floor plans. Shows three floor levels of pool, hot shop, and warm shop. Includes view of pool vestibule, personnel labyrinth, location of floor rails, and room numbers of office areas, labs, instrument rooms, and stairways. This drawing was re-drawn to show as-built features in 1993. Ralph M. Parsons 902-3-ANP-607-A 96. Date of original: December 1952. Approved by INEEL Classification Office for public release. INEEL index code no. 034-0607-00-693-106748 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

  17. Report from the 2nd Cardiovascular Outcome Trial (CVOT) Summit of the Diabetes and Cardiovascular Disease (D&CVD) EASD Study Group.

    PubMed

    Schnell, Oliver; Standl, Eberhard; Catrinoiu, Doina; Genovese, Stefano; Lalic, Nebojsa; Skra, Jan; Valensi, Paul; Rahelic, Dario; Ceriello, Antonio

    2017-03-11

    The 2nd Cardiovascular Outcome Trial (CVOT) Summit of the Diabetes and Cardiovascular Disease (D&CVD) EASD Study Group was held on the 20th-21st October 2016 in Munich. This second Summit was organized in light of recently published CVOTs on diabetes, with the aim of serving as a reference meeting for discussion on this topic. Along with presentations on the results of the most recently published CVOTs, panel discussions on trial implications for reimbursement and the perspective of cardiologists and/or nephrologists, as well as on CVOTs weaknesses and potentials constituted the heart of the program. Future activities of the D&CVD EASD Study Group in 2017 include an annual meeting in Milano and the 3rd CVOT Summit on Diabetes of the D&CVD EASD Study Group, in Munich ( http://www.dcvd.org ).

  18. Phase transition in tungsten-bronze Li2Pb2Nd2W2Ti4Nb4O30 ferroelectric

    NASA Astrophysics Data System (ADS)

    Parida, B. N.; Das, Piyush R.; Padhee, R.; Choudhary, R. N. P.

    2013-08-01

    The polycrystalline sample of Li2Pb2Nd2W2Ti4Nb4O30 was prepared by a solid-state reaction technique. Room temperature X-ray structural analysis confirms the formation of a single-phase compound. The morphology of the sintered sample recorded by scanning electron microscope exhibits a uniform grain distribution. Detailed studies of the nature of variation of dielectric constant, tangent loss, and polarization with temperature and frequency confirmed the existence of ferroelectricity in the material at room temperature. The temperature and frequency dependence of impedance parameters (impedance, modulus, etc.) of the material exhibits a strong correlation of its microstructure (i.e., bulk, grain boundary, etc.). Furthermore, the temperature dependence of DC conductivity shows a typical Arrhenius behavior of the material. The nature of variation of pyroelectric coefficient and current with temperature suggests that material has good pyroelectric properties useful for pyroelectric detector.

  19. Crystal structure of nonsuperconducting Pb 2(Sr 0.94Nd 0.06) 2(Nd 0.76Sr 0.24)Cu 3O 8

    NASA Astrophysics Data System (ADS)

    Hayri, Eric A.; Kvick, Åke

    1990-01-01

    The crystal structure of Pb 2(Sr 0.94Nd 0.06) 2(Nd 0.76Sr 0.24)Cu 3O 8 was determined by single crystal X-ray diffraction. The compound was found to be orthorhombic ( Cmmm) with a = 5.437(3), b = 5.472(2), c = 15.797(7)Å and Z = 2. In the structure double layers of CuO square pyramids are separated by (Nd, Sr) oxygen deficient layers which are stacked between (PbO)Cu(PbO) slabs. The oxygen in the Pb planes is shifted toward a pair of Pb atoms resulting in an orthorhombic distortion of the tetragonal unit cell. The possibilities for modulations and superlattices are discussed as is the role of the PbO planes in superconductivity.

  20. Concentric Crater Floor Deposits in Daedalia Planum

    NASA Technical Reports Server (NTRS)

    2003-01-01

    [figure removed for brevity, see original site]

    Released 3 September 2003

    Concentric crater floor deposits in Daedalia Planum. Lava flows appear to be converging on this crater from the northeast as well as on the crater floor. The concentric floor deposits may be the result of exposed and eroded layers of sediment that make up the crater floor.

    Image information: VIS instrument. Latitude -22.3, Longitude 221.5 East (138.5 West). 19 meter/pixel resolution.

    Note: this THEMIS visual image has not been radiometrically nor geometrically calibrated for this preliminary release. An empirical correction has been performed to remove instrumental effects. A linear shift has been applied in the cross-track and down-track direction to approximate spacecraft and planetary motion. Fully calibrated and geometrically projected images will be released through the Planetary Data System in accordance with Project policies at a later time.

    NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The Thermal Emission Imaging System (THEMIS) was developed by Arizona State University, Tempe, in collaboration with Raytheon Santa Barbara Remote Sensing. The THEMIS investigation is led by Dr. Philip Christensen at Arizona State University. Lockheed Martin Astronautics, Denver, is the prime contractor for the Odyssey project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena.

  1. Sea Floor off San Diego, California

    USGS Publications Warehouse

    Dartnell, Peter; Gibbons, Helen

    2009-01-01

    Ocean-floor image generated from multibeam-bathymetry data acquired by the U.S. Geological Survey (USGS); Woods Hole Oceanographic Institution; Scripps Institution of Oceanography; California State University, Monterey Bay; and Fugro Pelagos. To learn more, visit http://pubs.usgs.gov/sim/2007/2959/.

  2. Extending the sub-sea-floor biosphere.

    PubMed

    Roussel, Erwan G; Bonavita, Marie-Anne Cambon; Querellou, Joël; Cragg, Barry A; Webster, Gordon; Prieur, Daniel; Parkes, R John

    2008-05-23

    Sub-sea-floor sediments may contain two-thirds of Earth's total prokaryotic biomass. However, this has its basis in data extrapolation from ~500-meter to 4-kilometer depths, whereas the deepest documented prokaryotes are from only 842 meters. Here, we provide evidence for low concentrations of living prokaryotic cells in the deepest (1626 meters below the sea floor), oldest (111 million years old), and potentially hottest (~100 degrees C) marine sediments investigated. These Newfoundland margin sediments also have DNA sequences related to thermophilic and/or hyperthermophilic Archaea. These form two unique clusters within Pyrococcus and Thermococcus genera, suggesting unknown, uncultured groups are present in deep, hot, marine sediments (~54 degrees to 100 degrees C). Sequences of anaerobic methane-oxidizing Archaea were also present, suggesting a deep biosphere partly supported by methane. These findings demonstrate that the sub-sea-floor biosphere extends to at least 1600 meters below the sea floor and probably deeper, given an upper temperature limit for prokaryotic life of at least 113 degrees C and increasing thermogenic energy supply with depth.

  3. Performance Support on the Shop Floor.

    ERIC Educational Resources Information Center

    Kasvi, Jyrki J. J.; Vartiainen, Matti

    2000-01-01

    Discussion of performance support on the shop floor highlights four support systems for assembly lines that incorporate personal computer workstations in local area networks and use multimedia documents. Considers new customer-focused production paradigms; organizational learning; knowledge development; and electronic performance support systems…

  4. Seeing Results in Flooring for Schools

    ERIC Educational Resources Information Center

    Simmons, Brian

    2011-01-01

    Operations staffs at education facilities of all sizes are tasked with selecting a hard floor cleaning program that is cost-effective, efficient and highly productive. With an increased focus on the sustainability of an environment, facility managers also must select a program that meets sustainability goals while maintaining a healthful, safe…

  5. Organizational Learning in Shop Floor Level

    ERIC Educational Resources Information Center

    Cheung, Che Keung; Geng, Shuang; Chuah, Kong Bieng; Chau, Yiu Chung; Kwong, Kar Fai

    2016-01-01

    Purpose: This paper aims to present the result of the pilot run of a research project which aims at evaluating the applicability of project-based action learning (PAL) to shop floor organizational learning (OL) component in a manufacturing company in Dongguan, China. How the PAL framework was introduced and implemented is described. The factors…

  6. Building Trades. Block III. Floor Framing.

    ERIC Educational Resources Information Center

    Texas A and M Univ., College Station. Vocational Instructional Services.

    This document contains three units of a course on floor framing to be used as part of a building trades program. Each unit consists, first, of an informational lesson, with complete lesson plan for the teacher's use. Included in each lesson plan are the lesson aim; lists of teaching aids, materials, references, and prerequisites for students;…

  7. Wound healing and soft tissue effects of CO2, contact Nd: YAG and combined CO2-Nd: YAG laser beams on rabbit trachea.

    PubMed

    Laranne, J; Lagerstedt, A; Pukander, J; Rantala, I

    1997-11-01

    Rabbit trachea was used as an experimental model to study tissue effects and healing of full-thickness tracheal lesions produced by CO2, contact Nd: YAG and combined, coaxial CO2-Nd: YAG (Combo) laser beams. Two power settings (10 W and 16 W) were used with CO2 and contact Nd: YAG lasers. Three different CO2/Nd:YAG power ratios (1:1, 1:2 and 1:4) and power settings (12 W 15 W and 16 W) were used with the Combolaser. Histological specimens for light and transmission electron microscopy were prepared immediately and 1, 3, 5, 7, 14 and 21 days postoperatively. The wound with the most precise and fastest healing was produced by contact Nd: YAG laser. CO2 laser produced a moderate amount of charring and the largest amount of coagulated tissue with a slightly prolonged healing period. In the acute phase, tissue defects produced by the Combolaser with power ratios 1:1 and 1:2 resembled the CO2 laser lesions but with slightly less charring. The power ratio 1:4 diminished the cutting properties of the beam considerably. During the healing period the Combolaser produced the most intensive inflammation and granulation tissue formation resulting in delayed regeneration of the lesion. In transmission electron micrographs the most severe damage to chondrocytes was seen after using the Combolaser. These findings indicate that the Combolaser produces deeper tissue damage than CO2 or contact Nd:YAG laser. However, the Combolaser appears to be suitable for tracheobronchial operations, owing to its good simultaneous cutting and haemostatic properties.

  8. The influence of Nd3+ in CaAl2O4:Eu2+,Nd3+ phosphor fabricated by combustion synthesis

    NASA Astrophysics Data System (ADS)

    Yang, Zhiping; Yang, Yong; Li, Xingmin; Li, Xu; Liu, Chong; Feng, Jianwei

    2005-01-01

    Eu2+, Nd3+ co-doped calcium aluminate (CaAl2O4) phosphor with high brightness and long afterglow were fabricated by urea-nitrate solution combustion synthesis at 600°C. The phosphor powder of combustion synthesis were generally more homogeneous and had fewer impurity than phosphor fabricated by conventional solid-state methods, the character could conduce to obtain more exact data. The excitation and emission spectrum indicated that there waxs only one luminescence center Eu2+, both of the characteristic spectrums of Eu3+ and Nd3+ weren't discovered. As a secondary activator, Nd3+ could make remarkable influence on the afterglow of phosphor. From altering the moral ratio of Eu2+ and Nd3+, the lasting time of afterglow and thermoluminescence were studied respectively, when Nd3+ wasn't appended, the intensity of initial brightness could compared with other materials which had different ratio of Eu2+ and Nd3+, however the brightness of afterglow decayed rapidly, the lasting time and brightness of afterglow were improved with reduce the radio of Eu2+ and Nd3+, while the ratio achieved some value, the lasting time of afterglow become shorten with the reduce of ratio of Eu2+ and Nd3+. Moreover the depth of trap was calculated from the parameter of thermoluminescence. However, the emission spectrum and XRD patterns didn't change obviously with the altering ratio of Eu2+ and Nd3+. It showed that the little amount of doped rear earth ions (Eu2+ and Nd3+) had almost no effect on the CaAl2O4 phase composition. Based on these conclusions, the model of the luminescence process of CaAl2O4:Eu2+, Nd3+ was built.

  9. Evaluation of 2nd generation flue gas conditioning for hot-side and cold-side ESPs

    SciTech Connect

    Durham, M.D.; Bustard, C.J.; Baldrey, K.E.; Martin, C.E.; Jackson, D.W.; Lindsey, C.V.; Millar, T.J.

    1999-07-01

    New and emerging regulations such as PM2.5 and restrictions on emission of air toxics have created a demand for new technologies to reduce the emissions of fine particles from large industrial sources. ADA Environmental Solutions, LLC (ADA-ES) has commercialized a family of proprietary, flue gas conditioning agents to provide utilities and industries with a cost-effective means of complying with environmental regulations on particulate emissions and opacity. The phosphate-based flue gas conditioning additives decrease particle resistivity and improve the performance of ESPs with resistivity related performance problems. In addition, the new additives are effective on a wide range of coal-ash chemistries, which allows the utility flexibility to select the most economical coal. Finally, this technology is effective in applications where conventional SO{sub 3} flue gas conditioning does not work such as hot-side ESPs and cold-side ESPs that operate above 375 degrees F. Based upon performance and economic criteria, ADA-ES expects to fill the following niches for improving performance of ESPs: (1) All hot-side ESPs and warm-side ({gt}350 degrees F) ESPs; (2) Cold-side ESPs with difficult to collect ash, such as those collecting ash from PRB coal; (3) Older units with limited operating life remaining; (4) ESP's that annually only need conditioning on an intermittent basis; and (5) Units that burn several coals with only a few that cause problems. This paper provides a summary of the relevant experience gained from the use of the ADA-ES conditioning technology at several different sites. Laboratory tests are presented which help explain the performance observed at some sites. In addition, a description of the development and the latest results from full-scale trials with an improved version of the product, ADA-34, are presented.

  10. Super Bugs, Resurgent and Emerging Diseases, and Pandemics: A National Security Perspective

    DTIC Science & Technology

    2008-01-01

    1 - SUPERBUGS , RESURGENT AND EMERGING DISEASES, AND PANDEMICS: A NATIONAL SECURITY PERSPECTIVE By Frances T. Pilch and 2nd Lt Kenneth...in reality, ― superbugs ‖ (those bacteria that have developed immunity to a wide number of antibiotics), emergent and resurgent diseases, and pandemics...release; distribution is unlimited. While not often considered, ― superbugs ‖ may pose a greater threat to U.S. national security than terrorists or WMDs

  11. FLOOR PLAN OF MAIN PROCESSING BUILDING (CPP601), FIRST FLOOR SHOWING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    FLOOR PLAN OF MAIN PROCESSING BUILDING (CPP-601), FIRST FLOOR SHOWING SAMPLE CORRIDORS AND EIGHTEEN CELLS AND ADJOINING REMOTE ANALYTICAL FACILITY (CPP-627) SHOWING REMOTE ANALYTICAL FACILITIES LAB, DECONTAMINATION ROOM, AND MULTICURIE CELL ROOM. TO LEFT ARE LABORATORY BUILDING (CPP-602) AND MAINTENANCE BUILDING (CPP-630). INL DRAWING NUMBER 200-0601-00-706-051979. ALTERNATE ID NUMBER CPP-E-1979. - Idaho National Engineering Laboratory, Idaho Chemical Processing Plant, Fuel Reprocessing Complex, Scoville, Butte County, ID

  12. FLOOR PLAN OF MAIN PROCESSING BUILDING (CPP601), SECOND FLOOR SHOWING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    FLOOR PLAN OF MAIN PROCESSING BUILDING (CPP-601), SECOND FLOOR SHOWING PROCESS MAKEUP AREA AND EIGHTEEN CELLS AND ADJOINING REMOTE ANALYTICAL FACILITY (CPP-627) SHOWING COLD LAB, DECONTAMINATION ROOM, MULTICURIE CELL ROOM, AND OFFICES. TO LEFT ARE LABORATORY BUILDING (CPP-602) AND MAINTENANCE BUILDING (CPP-630). INL DRAWING NUMBER 200-0601-00-706-051980. ALTERNATE ID NUMBER CPP-E-1980. - Idaho National Engineering Laboratory, Idaho Chemical Processing Plant, Fuel Reprocessing Complex, Scoville, Butte County, ID

  13. Interior view of groundfloor porch showing exposed concrete floor slab ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Interior view of ground-floor porch showing exposed concrete floor slab system, facing west. - Albrook Air Force Station, Field Officer's Quarters, West side of Dargue Avenue Circle, Balboa, Former Panama Canal Zone, CZ

  14. View of double floor boards with mortises cross beams, showing ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View of double floor boards with mortises cross beams, showing spikes and flooring nails (Lower board layer exposed) - Silas C. Read Sawmill, Outlet of Maxwell Lake near North Range Road, Fort Gordon, Richmond County, GA

  15. 5. Light tower, stairs to second floor, looking northeast from ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. Light tower, stairs to second floor, looking northeast from first floor - Little River Light Station, East end of Little River Island, at mouth of Little River & entrance to Cutler Harbor, Cutler, Washington County, ME

  16. 30. GENERAL TEST ROOM IN 1946 ADDITION, FOURTH FLOOR, LOOKING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    30. GENERAL TEST ROOM IN 1946 ADDITION, FOURTH FLOOR, LOOKING WEST. ORIGINALLY HAD SUSPENDED ACOUSTICAL CEILINGS WITH FLOURESCENT LIGHTING AND ASPHALT MASTIC TILE FLOORS - Underwriters' Laboratories, 207-231 East Ohio Street, Chicago, Cook County, IL

  17. 32. Coffee bean sluiceway on ground floor showing chute bringing ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    32. Coffee bean sluiceway on ground floor showing chute bringing beans from first floor hopper. HAER PR, 6-MAGU, 1B-17 - Hacienda Buena Vista, PR Route 10 (Ponce to Arecibo), Magueyes, Ponce Municipio, PR

  18. 8. DETAIL: GENERATOR FLOOR DIABLO POWERHOUSE SHOWING BUTTERFLY VALVE CONTROL, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    8. DETAIL: GENERATOR FLOOR DIABLO POWERHOUSE SHOWING BUTTERFLY VALVE CONTROL, MOSAIC TILE FLOOR, AS SEEN FROM VISITORS GALLERY, 1989. - Skagit Power Development, Diablo Powerhouse, On Skagit River, 6.1 miles upstream from Newhalem, Newhalem, Whatcom County, WA

  19. 3. MILK BARN, INTERIOR VIEW OF GROUND FLOOR, LOOKING 132 ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3. MILK BARN, INTERIOR VIEW OF GROUND FLOOR, LOOKING 132 DEGREES SOUTHEAST, SHOWING RAISED FLOOR OF CENTRAL AISLE. - Hudson-Cippa-Wolf Ranch, Milk Barn, Sorento Road, Sacramento, Sacramento County, CA

  20. 50. Ground floor, looking northwest at former location of ground ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    50. Ground floor, looking northwest at former location of ground floor (bottom) level of milk room - Sheffield Farms Milk Plant, 1075 Webster Avenue (southwest corner of 166th Street), Bronx, Bronx County, NY

  1. 11. BUILDING 1: FIRST FLOOR (Center Section), WEST AND NORTH ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    11. BUILDING 1: FIRST FLOOR (Center Section), WEST AND NORTH WALLS, SHOWING TWO TIERS OF COLUMNS WITH SECOND FLOOR REMOVED - Boston Beer Company, 225-249 West Second Street, South Boston, Suffolk County, MA

  2. 46. NORTHEAST CORNER OF SECOND FLOOR WAREHOUSE, WITH DETAIL OF ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    46. NORTHEAST CORNER OF SECOND FLOOR WAREHOUSE, WITH DETAIL OF WOODEN BLOCK FLOORING. VIEW TO NORTH. - Ford Motor Company Long Beach Assembly Plant, Assembly Building, 700 Henry Ford Avenue, Long Beach, Los Angeles County, CA

  3. 21. REMAINS OF HOP BAILING CHUTE ON SECOND FLOOR; THIS ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    21. REMAINS OF HOP BAILING CHUTE ON SECOND FLOOR; THIS CHUTE EXTENDS TO THE GROUND FLOOR. - James W. Seavey Hop Driers, 0.6 mile East from junction of Highway 99 & Alexander Avenue, Corvallis, Benton County, OR

  4. 20. REMAINS OF HOP BAILING CHUTE ON GROUND FLOOR; THIS ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    20. REMAINS OF HOP BAILING CHUTE ON GROUND FLOOR; THIS CHUTE EXTENDS TO THE SECOND FLOOR. - James W. Seavey Hop Driers, 0.6 mile East from junction of Highway 99 & Alexander Avenue, Corvallis, Benton County, OR

  5. 27 CFR 46.231 - Floor stocks tax return.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... CIGARETTE PAPERS AND TUBES Floor Stocks Tax on Certain Tobacco Products, Cigarette Papers, and Cigarette....28T09, 2009 Floor Stocks Tax Return—Tobacco Products and Cigarette Papers and Tubes, is available...

  6. 73. STAIR PASSAGE LOOKING SOUTHEAST, SECOND FLOOR, LOCATED AT EAST ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    73. STAIR PASSAGE LOOKING SOUTHEAST, SECOND FLOOR, LOCATED AT EAST END OF HOUSE OVER FIRST FLOOR KITCHEN WING, BETWEEN TWO BEDROOMS - Carter's Grove, U.S. Route 60 vicinity, Williamsburg, Williamsburg, VA

  7. 5. EAST SECTION OF BUILDING, FIRST FLOOR, WEST ROOM. NOTE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. EAST SECTION OF BUILDING, FIRST FLOOR, WEST ROOM. NOTE OVEN AT LEFT. All construction original except wood flooring, plumbing and electricity. - Ralph Izard House, Kitchen Building, 110 Broad Street, Charleston, Charleston County, SC

  8. Refrigeration Plant, North Elevation, Second Floor Plan, East Elevation, Ground ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Refrigeration Plant, North Elevation, Second Floor Plan, East Elevation, Ground Floor Plan, Section A-A - Kennecott Copper Corporation, On Copper River & Northwestern Railroad, Kennicott, Valdez-Cordova Census Area, AK

  9. 18. 1925 Main Factory building, interior, second floor, view looking ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    18. 1925 Main Factory building, interior, second floor, view looking northeast at opening in the floor for dropping warp rolls - North Star Woolen Mill, 109 Portland Avenue South, Minneapolis, Hennepin County, MN

  10. 20. View of second floor to the Cherry Hill lettuce ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    20. View of second floor to the Cherry Hill lettuce shed looking at floor area - Richmond Hill Plantation, Cherry Hill Lettuce Shed, East of Richmond Hill on Ford Neck Road, Richmond Hill, Bryan County, GA

  11. 27. INTERIOR, FIRST FLOOR, SOUTH ENTRANCE, SOUTH LOBBY, DETAIL OF ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    27. INTERIOR, FIRST FLOOR, SOUTH ENTRANCE, SOUTH LOBBY, DETAIL OF BRONZE SEAL IN FLOOR (4' x 5' negative; 8' x 10' print) - U.S. Department of the Interior, Eighteenth & C Streets Northwest, Washington, District of Columbia, DC

  12. 3. FIRST FLOOR, FRONT SOUTHWEST CORNER ROOM WITH STAIRWAY TO ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3. FIRST FLOOR, FRONT SOUTHWEST CORNER ROOM WITH STAIRWAY TO SECOND FLOOR - Penn School Historic District, Benezet House, 1 mile South of Frogmore, Route 37, St Helena Island, Frogmore, Beaufort County, SC

  13. CAR MACHINE SHOP, SECOND FLOOR, PAINT SPRAY ROOM EXTERIOR AND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    CAR MACHINE SHOP, SECOND FLOOR, PAINT SPRAY ROOM EXTERIOR AND ATTIC FLOOR SUPPORT COLUMNS AND BEAMS, LOOKING WEST. - Southern Pacific, Sacramento Shops, Car Machine Shop, 111 I Street, Sacramento, Sacramento County, CA

  14. 27 CFR 46.231 - Floor stocks tax return.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... CIGARETTE PAPERS AND TUBES Floor Stocks Tax on Certain Tobacco Products, Cigarette Papers, and Cigarette....28T09, 2009 Floor Stocks Tax Return—Tobacco Products and Cigarette Papers and Tubes, is available...

  15. 27 CFR 46.233 - Payment of floor stocks tax.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... PRODUCTS AND CIGARETTE PAPERS AND TUBES Floor Stocks Tax on Certain Tobacco Products, Cigarette Papers, and Cigarette Tubes Held for Sale on April 1, 2009 Filing Requirements § 46.233 Payment of floor stocks tax....

  16. 27 CFR 46.231 - Floor stocks tax return.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... CIGARETTE PAPERS AND TUBES Floor Stocks Tax on Certain Tobacco Products, Cigarette Papers, and Cigarette....28T09, 2009 Floor Stocks Tax Return—Tobacco Products and Cigarette Papers and Tubes, is available...

  17. 25. FIRST FLOOR, EAST DRAWING ROOM MANTLE. Details of mantle ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    25. FIRST FLOOR, EAST DRAWING ROOM MANTLE. Details of mantle are copied in the major first floor rooms on the door and window cornices and architraves. - Charles Edmonston House, 21 East Battery Street, Charleston, Charleston County, SC

  18. NORTHEAST ELEVATION SHOWING THE COVERED PROMENADE AT THE FIRST FLOOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    NORTHEAST ELEVATION SHOWING THE COVERED PROMENADE AT THE FIRST FLOOR AND THREE WINDOWS (BOARDED) AT THE SECOND FLOOR. VIEW FACING SOUTHWEST - U.S. Naval Base, Pearl Harbor, Theater, Hornet Avenue between Enterprise & Pokomoke Streets, Pearl City, Honolulu County, HI

  19. Formaldehyde and TVOC emission behavior of laminate flooring by structure of laminate flooring and heating condition.

    PubMed

    An, Jae-Yoon; Kim, Sumin; Kim, Hyun-Joong

    2011-03-15

    Formaldehyde was measured with a desiccator, a 20 L chamber and the FLEC method. The formaldehyde emission rate from laminate was the highest at 32 °C using the desiccator, which then decreased with time. The formaldehyde emission using the 20 L small chamber and FLEC showed a similar tendency. There was a strong correlation between the formaldehyde and total volatile organic compounds (TVOCs) with both types of floorings using the two different methods. The formaldehyde emission rate and TVOC results were higher when tested using the FLEC method than with the 20 L small chamber method. The emission rate was affected by the joint edge length in laminate flooring. Toluene, ethylbenzene and xylene were the main VOCs emitted from laminate flooring, and there were more unidentified VOCs emitted than identified VOCs. The samples heated with a floor heating system emitted more formaldehyde than those heated using an air circulation system due to the temperature difference between the bottom panel and flooring. The TVOC emission level of the samples was higher when an air circulation system was used than when a floor heating system was used due to the high ventilation rate.

  20. 77 FR 8839 - Proposed Collection; Comment Request

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-15

    ... System Office, 4800 Mark Center Drive, 2nd Floor, East Tower, Suite 02G09, Alexandria, VA 22350-3100... seeks to uncover the emerging trends in supply chain management (SCM) practices, processes and...

  1. The Emergence of Cultural Self-Constructs: Autobiographical Memory and Self-Description in European American and Chinese Children

    ERIC Educational Resources Information Center

    Wang, Qi

    2004-01-01

    This study examined the emergence of cultural self-constructs as reflected in children's remembered and conceptual aspects of the self. European American and Chinese children in preschool through 2nd grade participated (N=180). Children each recounted 4 autobiographical events and described themselves in response to open-ended questions. American…

  2. 13. INTERIOR VIEW, FIRST FLOOR SHOWING THE ELEVATORS FEEDING GRAIN ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    13. INTERIOR VIEW, FIRST FLOOR SHOWING THE ELEVATORS FEEDING GRAIN FROM THE SECOND FLOOR TO THE GRINDING STONES, WITH GRAIN ELEVATORS IN BACKGROUND (NOTE OUTLINE ON THE FLOOR WHERE ROLLER MILLS WERE ORIGINALLY PLACED) - Schech's Mill, Beaver Creek State Park, La Crescent, Houston County, MN

  3. What Do You Really Know About Floor Finishes & Strippers?

    ERIC Educational Resources Information Center

    Wirth, T. J.

    1972-01-01

    An independent testing laboratory reveals the results of comparative studies done on vinyl flooring and the question of to wax or not to wax'' and which waxes work best with what flooring; and provides six evaluation tips on floor strippers. (EA)

  4. 27 CFR 46.233 - Payment of floor stocks tax.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2014-04-01 2014-04-01 false Payment of floor stocks... PRODUCTS AND CIGARETTE PAPERS AND TUBES Floor Stocks Tax on Certain Tobacco Products, Cigarette Papers, and Cigarette Tubes Held for Sale on April 1, 2009 Filing Requirements § 46.233 Payment of floor stocks tax....

  5. 27 CFR 46.195 - Floor stocks requirements.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2012-04-01 2011-04-01 true Floor stocks requirements... CIGARETTE PAPERS AND TUBES Floor Stocks Tax on Certain Tobacco Products, Cigarette Papers, and Cigarette Tubes Held for Sale on April 1, 2009 General § 46.195 Floor stocks requirements. (a) Take inventory....

  6. 27 CFR 46.231 - Floor stocks tax return.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2014-04-01 2014-04-01 false Floor stocks tax return... CIGARETTE PAPERS AND TUBES Floor Stocks Tax on Certain Tobacco Products, Cigarette Papers, and Cigarette Tubes Held for Sale on April 1, 2009 Filing Requirements § 46.231 Floor stocks tax return. Form...

  7. 27 CFR 46.195 - Floor stocks requirements.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Floor stocks requirements... CIGARETTE PAPERS AND TUBES Floor Stocks Tax on Certain Tobacco Products, Cigarette Papers, and Cigarette Tubes Held for Sale on April 1, 2009 General § 46.195 Floor stocks requirements. (a) Take inventory....

  8. 27 CFR 46.221 - Floor stocks tax rates.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2013-04-01 2013-04-01 false Floor stocks tax rates. 46... CIGARETTE PAPERS AND TUBES Floor Stocks Tax on Certain Tobacco Products, Cigarette Papers, and Cigarette Tubes Held for Sale on April 1, 2009 Tax Liability Calculation § 46.221 Floor stocks tax rates....

  9. 27 CFR 46.233 - Payment of floor stocks tax.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2013-04-01 2013-04-01 false Payment of floor stocks... PRODUCTS AND CIGARETTE PAPERS AND TUBES Floor Stocks Tax on Certain Tobacco Products, Cigarette Papers, and Cigarette Tubes Held for Sale on April 1, 2009 Filing Requirements § 46.233 Payment of floor stocks tax....

  10. 27 CFR 46.221 - Floor stocks tax rates.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2014-04-01 2014-04-01 false Floor stocks tax rates. 46... CIGARETTE PAPERS AND TUBES Floor Stocks Tax on Certain Tobacco Products, Cigarette Papers, and Cigarette Tubes Held for Sale on April 1, 2009 Tax Liability Calculation § 46.221 Floor stocks tax rates....

  11. 27 CFR 46.195 - Floor stocks requirements.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2011-04-01 2011-04-01 false Floor stocks requirements... CIGARETTE PAPERS AND TUBES Floor Stocks Tax on Certain Tobacco Products, Cigarette Papers, and Cigarette Tubes Held for Sale on April 1, 2009 General § 46.195 Floor stocks requirements. (a) Take inventory....

  12. 27 CFR 46.233 - Payment of floor stocks tax.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2012-04-01 2011-04-01 true Payment of floor stocks tax... CIGARETTE PAPERS AND TUBES Floor Stocks Tax on Certain Tobacco Products, Cigarette Papers, and Cigarette Tubes Held for Sale on April 1, 2009 Filing Requirements § 46.233 Payment of floor stocks tax....

  13. 27 CFR 46.195 - Floor stocks requirements.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2014-04-01 2014-04-01 false Floor stocks requirements... CIGARETTE PAPERS AND TUBES Floor Stocks Tax on Certain Tobacco Products, Cigarette Papers, and Cigarette Tubes Held for Sale on April 1, 2009 General § 46.195 Floor stocks requirements. (a) Take inventory....

  14. 27 CFR 46.231 - Floor stocks tax return.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2013-04-01 2013-04-01 false Floor stocks tax return... CIGARETTE PAPERS AND TUBES Floor Stocks Tax on Certain Tobacco Products, Cigarette Papers, and Cigarette Tubes Held for Sale on April 1, 2009 Filing Requirements § 46.231 Floor stocks tax return. Form...

  15. 27 CFR 46.195 - Floor stocks requirements.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2013-04-01 2013-04-01 false Floor stocks requirements... CIGARETTE PAPERS AND TUBES Floor Stocks Tax on Certain Tobacco Products, Cigarette Papers, and Cigarette Tubes Held for Sale on April 1, 2009 General § 46.195 Floor stocks requirements. (a) Take inventory....

  16. 36 CFR 1192.117 - Floors, steps and thresholds.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 36 Parks, Forests, and Public Property 3 2013-07-01 2012-07-01 true Floors, steps and thresholds. 1192.117 Section 1192.117 Parks, Forests, and Public Property ARCHITECTURAL AND TRANSPORTATION BARRIERS... Intercity Rail Cars and Systems § 1192.117 Floors, steps and thresholds. (a) Floor surfaces on aisles,...

  17. 29 CFR 1926.855 - Manual removal of floors.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... floor arch, debris and other material shall be removed from such arch and other adjacent floor area... inches wide, formed of planks not less than 2 inches thick if wood, or of equivalent strength if metal... upon exposed beams. (d) Stringers of ample strength shall be installed to support the flooring...

  18. 75 FR 70061 - Dealer Floor Plan Pilot Program Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-11-16

    ... ADMINISTRATION Dealer Floor Plan Pilot Program Meeting AGENCY: U.S. Small Business Administration (SBA). ACTION... agenda for a meeting regarding the Dealer Floor Plan Pilot Program established in the Small Business Jobs Act of 2010. The meeting will be open to the public. DATES: The Dealer Floor Plan Pilot...

  19. Evaluation of splash erosion at forest floor in mature Japanese cypress plantations

    NASA Astrophysics Data System (ADS)

    Nanko, K.; Mizugaki, S.; Onda, Y.; Hiramatsu, S.

    2005-12-01

    Poorly managed mature Japanese cypress ( Chamaecyparis obtusa) plantations in Japan have bared floor with little surface cover because cypress litter readily decomposes small pieces and weak penetration of sunlight results in poor growth of forest undergrowth, therefore suffered from surface erosion. In surface erosion process at forest floor, the effect of raindrop-impact-induced erosion would be high because the canopy produces large raindrops and promotes raindrops' erosive potential by increasing their kinetic energy. In this study, we evaluated the effect of slopes and transition of the splash erosion in order to investigate the process of surface erosion at bared forest floor. This study area is a mature Japanese cypress plantation in Taisho town, Shikoku Island, Japan. The splash erosion was observed by 27 splash cups (exposed soil area with 10cm in diameter) at forest slope with the inclination from 9 to 39°, respectively. The splash cups were divided five slope classes; each class value was 12.5, 20.5, 25.5, 29.5, and 37°. The splashed soil was separately collected in three split periods; each period had 86.2, 68.0, and 84.0 mm throughfall precipitation. Raindrop kinetic energy was simultaneously monitored by 2 laser raindrop-sizing instruments. Throughfall had similar drop size distribution and kinetic energy during each period and mean drop kinetic energy was 15.0 J m-2 mm-1. The splash rate during all observation period was 14.5, 11.4, 12.2, 9.1, and 4.6 g m-2 mm-1 at the each slope class, respectively. The splashed soil was found to reduce as time. Particularly the gentlest slope class had marked decrease for the splash rate; 25.2, 10.4, and 6.9 g m-2 mm-1 during 1st, 2nd, and 3rd period, respectively. On the other hand the steepest slope class had little change of the splash rate; 3.3, 6.7, and 4.2 g m-2 mm-1 . Some earlier studies using cultivated soil showed the splash rate increased with slopes, but this study showed contrary results. Although

  20. TRITIUM LABORATORY, TRA666, INTERIOR. MAIN FLOOR. CONTROL ROOM ENCLOSURE AT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    TRITIUM LABORATORY, TRA-666, INTERIOR. MAIN FLOOR. CONTROL ROOM ENCLOSURE AT CENTER OF VIEW. SIGN ABOVE DOOR SAYS "HYDRAULIC TEST FACILITY CONTROL ROOM." SIGN IN WINDOW SAYS "EATING AREA." "EVACUATION AND EMERGENCY INFORMATION" IS POSTED ON CABINET AT LEFT OF VIEW. INL NEGATIVE NO. HD30-2-3. Mike Crane, Photographer, 6/2001 - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

  1. Beyond the Floor Effect on the Wechsler Intelligence Scale for Children-4th Ed. (WISC-IV): Calculating IQ and Indexes of Subjects Presenting a Floored Pattern of Results

    ERIC Educational Resources Information Center

    Orsini, A.; Pezzuti, L.; Hulbert, S.

    2015-01-01

    Background: It is now widely known that children with severe intellectual disability show a 'floor effect' on the Wechsler scales. This effect emerges because the practice of transforming raw scores into scaled scores eliminates any variability present in participants with low intellectual ability and because intelligence quotient (IQ) scores are…

  2. Imaging of pediatric floor of mouth lesions.

    PubMed

    Edwards, Rachael M; Chapman, Teresa; Horn, David L; Paladin, Angelisa M; Iyer, Ramesh S

    2013-03-01

    There is a vast spectrum of pathology that afflicts the floor of mouth in children. These span inflammatory conditions, vascular malformations, developmental anomalies, benign tumors and malignancies. While this area is readily evaluated on clinical exam, imaging is often performed to better characterize the disorder prior to management. The imaging modalities most frequently utilized are US, CT and MR. The purpose of this article is to describe the primary conditions that occur in this location in children so that radiologists may provide an appropriate differential diagnosis. These include ranula, venolymphatic malformation, dermoid, teratoma, foregut duplication cyst, hairy polyp, thyroglossal duct cyst and rhabdomyosarcoma. For each pathological condition, there will be a focus on describing its imaging manifestation. Floor of mouth anatomy, imaging approach during both prenatal and postnatal life and etiologies will be discussed. Surgical considerations and operative photographs will also be presented.

  3. RFID Data Cleaning for Shop Floor Applications

    NASA Astrophysics Data System (ADS)

    Ziekow, Holger; Ivantysynova, Lenka; Günter, Oliver

    In several case studies we found that shop-floor applications in manufacturing pose special challenges to cleaning RFID data. The underlying problem in many scenarios is the uncertainty about the exact location of observed RFID tags. Simple filter s provided in common middleware solutions do not cope well with these challenges. Therefore we have developed an approach based on maximum-likelihood estimation to infer a tag's location within the reader range. This enables improved RFID data cleaning in a number of application scenarios. We stress the benefits of our approach along exemplary application scenarios that we found in manufacturing. In simulations and experiments with real world data we show that our approach outperforms existing solutions. Our approach can extend RFID middleware or reader firmware, to improve the use of RFID in a range of shop-floor applications.

  4. Laparoscopic herniorrhaphy. Transabdominal preperitoneal floor repair.

    PubMed

    Felix, E L; Michas, C A; McKnight, R L

    1994-02-01

    The purpose of this study was to evaluate the results of a laparoscopic transabdominal preperitoneal (TAPP) approach to inguinal hernia repair which dissected the entire inguinal floor and repaired the indirect, direct, and femoral areas in all patients without tension. In our series, 183 patients had 205 hernia repairs and were followed for more than 6 months. Of this group, 128 hernias were indirect, 55 direct, 22 pantaloon, 26 recurrent, and 22 bilateral. All 12 females and the first 11 males had a single-buttress repair with polypropylene mesh. The other 160 male patients had a double-buttress repair. With median follow-up of 12 months, ranging from 6 to 21 months, no recurrences were found. Patients returned to normal activity in an average of 1 week. Dissection and buttressing of the entire inguinal floor with mesh appeared to solve the problem of early recurrence first seen in laparoscopic herniorrhaphy.

  5. High-Frequency CTD Measurements for Accurate GPS/acoustic Sea-floor Crustal Deformation Measurement System

    NASA Astrophysics Data System (ADS)

    Tadokoro, K.; Yasuda, K.; Taniguchi, S.; Uemura, Y.; Matsuhiro, K.

    2015-12-01

    The GPS/acoustic sea-floor crustal deformation measurement system has developed as a useful tool to observe tectonic deformation especially at subduction zones. One of the factors preventing accurate GPS/acoustic sea-floor crustal deformation measurement is horizontal heterogeneity of sound speed in the ocean. It is therefore necessary to measure the gradient directly from sound speed structure. We report results of high-frequency CTD measurements using Underway CTD (UCTD) in the Kuroshio region. We perform the UCTD measurements on May 2nd, 2015 at two stations (TCA and TOA) above the sea-floor benchmarks installed across the Nankai Trough, off the south-east of Kii Peninsula, middle Japan. The number of measurement points is six at each station along circles with a diameter of 1.8 nautical miles around the sea-floor benchmark. The stations TCA and TOA are located on the edge and the interior of the Kuroshio current, respectively, judging from difference in sea water density measured at the two stations, as well as a satellite image of sea-surface temperature distribution. We detect a sound speed gradient of high speeds in the southern part and low speeds in the northern part at the two stations. At the TCA station, the gradient is noticeable down to 300 m in depth; the maximum difference in sound speed is +/- 5 m/s. The sound speed difference is as small as +/- 1.3 m/s at depths below 300 m, which causes seafloor benchmark positioning error as large as 1 m. At the TOA station, the gradient is extremely small down to 100 m in depth. The maximum difference in sound speed is less than +/- 0.3 m/s that is negligible small for seafloor benchmark positioning error. Clear gradient of high speed is observed to the depths; the maximum difference in sound speed is +/- 0.8-0.9 m/s, causing seafloor benchmark positioning error of several tens centimeters. The UCTD measurement is effective tool to detect sound speed gradient. We establish a method for accurate sea-floor

  6. Ocean floor mounting of wave energy converters

    DOEpatents

    Siegel, Stefan G

    2015-01-20

    A system for mounting a set of wave energy converters in the ocean includes a pole attached to a floor of an ocean and a slider mounted on the pole in a manner that permits the slider to move vertically along the pole and rotate about the pole. The wave energy converters can then be mounted on the slider to allow adjustment of the depth and orientation of the wave energy converters.

  7. The Medusa Sea Floor Monitoring System

    NASA Astrophysics Data System (ADS)

    Flynn, F. T.; Schultz, A.; Gupta, M.; Powers, L.; Klinkhammer, G.

    2004-12-01

    The Medusa Sea Floor Monitoring System (MSMS) is a technology development project that is designed to enable fundamental research into understanding the potential for and limits to chemolithoautotrophic life. This is life within which inorganic carbon is converted to organic carbon and where only inorganic compounds serve as electron acceptors and electron donors. Such life forms are postulated to be capable of surviving in a Europan ocean. If we can prove that such life forms exist on Earth it would provide credence to the hypothesis that they might exist on other planets or moons in our Solar System. It has been hypothesized that one environment which might foster such life is associated with sub-seafloor hydrothermal vent structures. The goal of the MSMS project is to develop an instrument capable of testing this hypothesis. The MSMS instrument is an evolution of a sea floor monitoring system developed by Dr. Adam Schultz. Its design is the result of many generations of hardware and dive programs. Medusa provides the capability to measure and sample effluent and influent sea floor hydraulic flows associated with hydrothermal vent structures, active sea mounds, and sea floor bore holes. Through this proposal we are developing the next generation Medusa system and initiating the integration of several select chemical and biological sensors into the Medusa backbone. These sensors are an in situ flow-through spectral chemistry system, a cavity ringdown 12C/13C system, and an intrinsic fluorescence instrument. der way. This instrument can be used to target and discriminate between biological samples for automated sample collection

  8. Floor of Lake Tahoe, California and Nevada

    USGS Publications Warehouse

    Dartnell, Peter; Gibbons, Helen

    2011-01-01

    Lake-floor depths shown by color, from light tan (shallowest) to blue (deepest). Arrows on map (C) show orientations of perspective views. A, view toward McKinney Bay over blocks tumbled onto the lake floor by a massive landslide 10s to 100s of thousands of years ago; dark triangular block near center is approximately 1.5 km (0.9 mi) across and 120 m (390 ft) high. B, view toward South Lake Tahoe and Emerald Bay (on right) over sediment waves as much as 10 m (30 ft) high, created by sediment flowing down the south margin of the lake. Slopes appear twice as steep as they are. Lake-floor imagery from U.S. Geological Survey (USGS) multibeam bathymetric data and U.S. Army Corps of Engineers bathymetric lidar data. Land imagery generated by overlaying USGS digital orthophoto quadrangles (DOQs) on USGS digital elevation models (DEMs). All data available at http://tahoe.usgs.gov/.

  9. [Pelvic floor disorders from the surgeon's viewpoint].

    PubMed

    Schiedeck, T H

    2013-10-01

    Pelvic floor disorders present very differently with regard to symptoms and manifestation. Both diagnostic and treatment options require specific experience and an interdisciplinary approach. Diagnostic work-up is primarily based on medical history, physical examination and procto-rectoscopy. Furthermore, endosonography and perineal sonography have also gained importance. In almost all cases following these basic examinations conservative therapy options should be considered. As the interdisciplinary concept is very important, for careful diagnosis of pelvic floor disorders it became crucial to find an adequate form of treatment. Every decision for surgical therapy should not only focus on the results of previous examinations but should also consider the individual situation of each patient. In pelvic floor disorders a large variety of symptoms are confronted with a vast number of different and often highly specific procedures. The decisions on who to treat and how to treat are not only based on individual patient requests and desires but also on the experience and preference of the surgeon.

  10. Basaltic injections into floored silicic magma chambers

    NASA Astrophysics Data System (ADS)

    Wiebe, R. A.

    Recent studies have provided compelling evidence that many large accumulations of silicic volcanic rocks erupted from long-lasting, floored chambers of silicic magma that were repeatedly injected by basaltic magma. These basaltic infusions are commonly thought to play an important role in the evolution of the silicic systems: they have been proposed as a cause for explosive silicic eruptions [Sparks and Sigurdsson, 1977], compositional variation in ash-flow sheets [Smith, 1979], mafic magmatic inclusions in silicic volcanic rocks [Bacon, 1986], and mixing of mafic and silicic magmas [Anderson, 1976; Eichelberger, 1978]. If, as seems likely, floored silicic magma chambers have frequently been invaded by basalt, then plutonic bodies should provide records of these events. Although plutonic evidence for mixing and commingling of mafic and silicic magmas has been recognized for many years, it has been established only recently that some intrusive complex originated through multiple basaltic injections into floored chambers of silicic magma [e.g., Wiebe, 1974; Michael, 1991; Chapman and Rhodes, 1992].

  11. The Safety of Artemisinin Derivatives for the Treatment of Malaria in the 2nd or 3rd Trimester of Pregnancy: A Systematic Review and Meta-Analysis

    PubMed Central

    van Eijk, Anna Maria; Sevene, Esperanca; Dellicour, Stephanie; Weiss, Noel S.; Emerson, Scott; Steketee, Richard; ter Kuile, Feiko O.; Stergachis, Andy

    2016-01-01

    Given the high morbidity for mother and fetus associated with malaria in pregnancy, safe and efficacious drugs are needed for treatment. Artemisinin derivatives are the most effective antimalarials, but are associated with teratogenic and embryotoxic effects in animal models when used in early pregnancy. However, several organ systems are still under development later in pregnancy. We conducted a systematic review and meta-analysis of the occurrence of adverse pregnancy outcomes among women treated with artemisinins monotherapy or as artemisinin-based combination therapy during the 2nd or 3rd trimesters relative to pregnant women who received non-artemisinin antimalarials or none at all. Pooled odds ratio (POR) were calculated using Mantel-Haenszel fixed effects model with a 0.5 continuity correction for zero events. Eligible studies were identified through Medline, Embase, and the Malaria in Pregnancy Consortium Library. Twenty studies (11 cohort studies and 9 randomized controlled trials) contributed to the analysis, with 3,707 women receiving an artemisinin, 1,951 a non-artemisinin antimalarial, and 13,714 no antimalarial. The PORs (95% confidence interval (CI)) for stillbirth, fetal loss, and congenital anomalies when comparing artemisinin versus quinine were 0.49 (95% CI 0.24–0.97, I2 = 0%, 3 studies); 0.58 (95% CI 0.31–1.16, I2 = 0%, 6 studies); and 1.00 (95% CI 0.27–3.75, I2 = 0%, 3 studies), respectively. The PORs comparing artemisinin users to pregnant women who received no antimalarial were 1.13 (95% CI 0.77–1.66, I2 = 86.7%, 3 studies); 1.10 (95% CI 0.79–1.54, I2 = 0%, 4 studies); and 0.79 (95% CI 0.37–1.67, I2 = 0%, 3 studies) for miscarriage, stillbirth and congenital anomalies respectively. Treatment with artemisinin in 2nd and 3rd trimester was not associated with increased risks of congenital malformations or miscarriage and may be was associated with a reduced risk of stillbirths compared to quinine. This study updates the reviews

  12. Effects of Floor Level and Building Type on Residential Levels of Outdoor and Indoor Polycyclic Aromatic Hydrocarbons, Black Carbon, and Particulate Matter in New York City

    PubMed Central

    Jung, Kyung Hwa; Bernabé, Kerlly; Moors, Kathleen; Yan, Beizhan; Chillrud, Steven N.; Whyatt, Robin; Camann, David; Kinney, Patrick L.; Perera, Frederica P.; Miller, Rachel L.

    2011-01-01

    Consideration of the relationship between residential floor level and concentration of traffic-related airborne pollutants may predict individual residential exposure among inner city dwellers more accurately. Our objective was to characterize the vertical gradient of residential levels of polycyclic aromatic hydrocarbons (PAH; dichotomized into Σ8PAHsemivolatile (MW 178–206), and Σ8PAHnonvolatile (MW 228–278), black carbon (BC), PM2.5 (particulate matter) by floor level (FL), season and building type. We hypothesize that PAH, BC and PM2.5 concentrations may decrease with higher FL and the vertical gradients of these compounds would be affected by heating season and building type. PAH, BC and PM2.5 were measured over a two-week period outdoor and indoor of the residences of a cohort of 5–6 year old children (n = 339) living in New York City’s Northern Manhattan and the Bronx. Airborne-pollutant levels were analyzed by three categorized FL groups (0–2nd, 3rd–5th, and 6th–32nd FL) and two building types (low-rise versus high-rise apartment building). Indoor Σ8PAHnonvolatile and BC levels declined with increasing FL. During the nonheating season, the median outdoor Σ8PAHnonvolatile, but not Σ8PAHsemivolatile, level at 6th–2nd FL was 1.5–2 times lower than levels measured at lower FL. Similarly, outdoor and indoor BC concentrations at 6th–32nd FL were significantly lower than those at lower FL only during the nonheating season (p < 0.05). In addition, living in a low-rise building was associated significantly with higher levels of Σ8PAHnonvolatile and BC. These results suggest that young inner city children may be exposed to varying levels of air pollutants depending on their FL, season, and building type. PMID:21886868

  13. 112. Stage level floor structure. Generial view from downstage left, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    112. Stage level floor structure. Generial view from downstage left, facing northeast, showing structural supports for the stage floor after some of the flooring was removed. Openings in the stage floor could be made by rolling eight movable sections to the side and down under the fixed floor (see sheet 4 of 9, notes 1A and 1B). Once opened, another floor section of the same size as the opening could be raised to stage level by a hydraulic ram (type D1). The movable section in the foreground is in the retracted position, with its top surface below the flange of the beam supporting the fixed floor. Compare it to the height of the un-retracted section to the left (see sheet 6 of 9, notes 2A and 2B). - Auditorium Building, 430 South Michigan Avenue, Chicago, Cook County, IL

  14. Eye Emergencies

    MedlinePlus

    ... Fight for victory. Marfan & Related Disorders What is Marfan Syndrome? What are Related Disorders? What are the Signs? ... Emergencies Eye Emergencies Lung Emergencies Surgeries Eye Emergencies Marfan syndrome significantly increases your risk of retinal detachment, a ...

  15. Childhood Emergencies

    MedlinePlus

    ... SUBSCRIBE Emergency 101 Share this! Home » Emergency 101 Childhood Emergencies Keeping children healthy and safe is every ... and tools to prevent, recognize and address a childhood emergency is the first step in keeping your ...

  16. The Futures of Adult Educator(s): Agency, Identity and Ethos. Joint Conference Proceedings of the 2nd ESREA/ReNAdET Meeting and the 4th TQF Seminar (Tallinn, Estonia, November 9-11, 2011)

    ERIC Educational Resources Information Center

    Heikkinen, Anja, Ed.; Jogi, Larissa, Ed.; Jutte, Wolfgang, Ed.; Zarifis, Georgios K., Ed.

    2012-01-01

    This edited volume contains the papers presented in the 2nd ESREA|ReNAdet meeting that was jointly organised with the VET & CULTURE Network in the University of Tallinn (Estonia), 9-11 November 2011. The papers that appear in the volume discuss the future (or the futures) of adult educators in respect to issues of developing their identities…

  17. Stable isotope and trace element studies on gladiators and contemporary Romans from Ephesus (Turkey, 2nd and 3rd Ct. AD)--mplications for differences in diet.

    PubMed

    Lösch, Sandra; Moghaddam, Negahnaz; Grossschmidt, Karl; Risser, Daniele U; Kanz, Fabian

    2014-01-01

    The gladiator cemetery discovered in Ephesus (Turkey) in 1993 dates to the 2nd and 3rd century AD. The aim of this study is to reconstruct diverse diet, social stratification, and migration of the inhabitants of Roman Ephesus and the distinct group of gladiators. Stable carbon, nitrogen, and sulphur isotope analysis were applied, and inorganic bone elements (strontium, calcium) were determined. In total, 53 individuals, including 22 gladiators, were analysed. All individuals consumed C3 plants like wheat and barley as staple food. A few individuals show indication of consumption of C4 plants. The δ13C values of one female from the gladiator cemetery and one gladiator differ from all other individuals. Their δ34S values indicate that they probably migrated from another geographical region or consumed different foods. The δ15N values are relatively low in comparison to other sites from Roman times. A probable cause for the depletion of 15N in Ephesus could be the frequent consumption of legumes. The Sr/Ca-ratios of the gladiators were significantly higher than the values of the contemporary Roman inhabitants. Since the Sr/Ca-ratio reflects the main Ca-supplier in the diet, the elevated values of the gladiators might suggest a frequent use of a plant ash beverage, as mentioned in ancient texts.

  18. Stable Isotope and Trace Element Studies on Gladiators and Contemporary Romans from Ephesus (Turkey, 2nd and 3rd Ct. AD) - Implications for Differences in Diet

    PubMed Central

    Lösch, Sandra; Moghaddam, Negahnaz; Grossschmidt, Karl; Risser, Daniele U.; Kanz, Fabian

    2014-01-01

    The gladiator cemetery discovered in Ephesus (Turkey) in 1993 dates to the 2nd and 3rd century AD. The aim of this study is to reconstruct diverse diet, social stratification, and migration of the inhabitants of Roman Ephesus and the distinct group of gladiators. Stable carbon, nitrogen, and sulphur isotope analysis were applied, and inorganic bone elements (strontium, calcium) were determined. In total, 53 individuals, including 22 gladiators, were analysed. All individuals consumed C3 plants like wheat and barley as staple food. A few individuals show indication of consumption of C4 plants. The δ13C values of one female from the gladiator cemetery and one gladiator differ from all other individuals. Their δ34S values indicate that they probably migrated from another geographical region or consumed different foods. The δ15N values are relatively low in comparison to other sites from Roman times. A probable cause for the depletion of 15N in Ephesus could be the frequent consumption of legumes. The Sr/Ca-ratios of the gladiators were significantly higher than the values of the contemporary Roman inhabitants. Since the Sr/Ca-ratio reflects the main Ca-supplier in the diet, the elevated values of the gladiators might suggest a frequent use of a plant ash beverage, as mentioned in ancient texts. PMID:25333366

  19. Bone fractures as indicators of intentional violence in the eastern Adriatic from the antique to the late medieval period (2nd-16th century AD).

    PubMed

    Slaus, Mario; Novak, Mario; Bedić, Zeljka; Strinović, Davor

    2012-09-01

    To test the historically documented hypothesis of a general increase in deliberate violence in the eastern Adriatic from the antique (AN; 2nd-6th c.) through the early medieval (EM; 7th-11th c.) to the late-medieval period (LM; 12th-16th c.), an analysis of the frequency and patterning of bone trauma was conducted in three skeletal series from these time periods. A total of 1,125 adult skeletons-346 from the AN, 313 from the EM, and 466 from the LM series-were analyzed. To differentiate between intentional violence and accidental injuries, data for trauma frequencies were collected for the complete skeleton, individual long bones, and the craniofacial region as well as by type of injury (perimortem vs. antemortem). The results of our analyses show a significant temporal increase in total fracture frequencies when calculated by skeleton as well as of individuals exhibiting one skeletal indicator of deliberate violence (sharp force lesions, craniofacial injuries, "parry" fractures, or perimortem trauma). No significant temporal increases were, however, noted in the frequencies of craniofacial trauma, "parry" fractures, perimortem injuries, or of individuals exhibiting multiple skeletal indicators of intentional violence. Cumulatively, these data suggest that the temporal increase in total fracture frequencies recorded in the eastern Adriatic was caused by a combination of factors that included not only an increase of intentional violence but also a significant change in lifestyle that accompanied the transition from a relatively affluent AN urban lifestyle to a more primitive rural medieval way of life.

  20. Development and Validation of Big Four Personality Scales for the Schedule for Nonadaptive and Adaptive Personality-2nd Edition (SNAP-2)

    PubMed Central

    Calabrese, William R.; Rudick, Monica M.; Simms, Leonard J.; Clark, Lee Anna

    2012-01-01

    Recently, integrative, hierarchical models of personality and personality disorder (PD)—such as the Big Three, Big Four and Big Five trait models—have gained support as a unifying dimensional framework for describing PD. However, no measures to date can simultaneously represent each of these potentially interesting levels of the personality hierarchy. To unify these measurement models psychometrically, we sought to develop Big Five trait scales within the Schedule for Adaptive and Nonadaptive Personality–2nd Edition (SNAP-2). Through structural and content analyses, we examined relations between the SNAP-2, Big Five Inventory (BFI), and NEO-Five Factor Inventory (NEO-FFI) ratings in a large data set (N = 8,690), including clinical, military, college, and community participants. Results yielded scales consistent with the Big Four model of personality (i.e., Neuroticism, Conscientiousness, Introversion, and Antagonism) and not the Big Five as there were insufficient items related to Openness. Resulting scale scores demonstrated strong internal consistency and temporal stability. Structural and external validity was supported by strong convergent and discriminant validity patterns between Big Four scale scores and other personality trait scores and expectable patterns of self-peer agreement. Descriptive statistics and community-based norms are provided. The SNAP-2 Big Four Scales enable researchers and clinicians to assess personality at multiple levels of the trait hierarchy and facilitate comparisons among competing “Big Trait” models. PMID:22250598

  1. XUV spectra of 2nd transition row elements: identification of 3d-4p and 3d-4f transition arrays

    NASA Astrophysics Data System (ADS)

    Lokasani, Ragava; Long, Elaine; Maguire, Oisin; Sheridan, Paul; Hayden, Patrick; O'Reilly, Fergal; Dunne, Padraig; Sokell, Emma; Endo, Akira; Limpouch, Jiri; O'Sullivan, Gerry

    2015-12-01

    The use of laser produced plasmas (LPPs) in extreme ultraviolet/soft x-ray lithography and metrology at 13.5 nm has been widely reported and recent research efforts have focused on developing next generation sources for lithography, surface morphology, patterning and microscopy at shorter wavelengths. In this paper, the spectra emitted from LPPs of the 2nd transition row elements from yttrium (Z = 39) to palladium (Z = 46), with the exception of zirconium (Z = 40) and technetium (Z = 43), produced by two Nd:YAG lasers which delivered up to 600 mJ in 7 ns and 230 mJ in 170 ps, respectively, are reported. Intense emission was observed in the 2-8 nm spectral region resulting from unresolved transition arrays (UTAs) due to 3d-4p, 3d-4f and 3p-3d transitions. These transitions in a number of ion stages of yttrium, niobium, ruthenium and rhodium were identified by comparison with results from Cowan code calculations and previous studies. The theoretical data were parameterized using the UTA formalism and the mean wavelength and widths were calculated and compared with experimental results.

  2. The photoluminescence and thermoluminescence properties of novel green long-lasting phosphorescence materials Ca8Mg(SiO4)4Cl2:Eu2+,Nd3+

    NASA Astrophysics Data System (ADS)

    Wang, J.; Zhang, M.; Zhang, Q.; Ding, W.; Su, Q.

    2007-04-01

    The novel green long-lasting phosphorescence (LLP) material Ca8Mg(SiO4)4Cl2:Eu2+,Nd3+ was systematically investigated by means of photoluminescence (PL) excitation and emission, a thermal quenching process, long-lasting phosphorescent emission, decay curves, chromaticity and thermoluminescence (TL) spectra. It is clearly observed that there exist two distinguishable Eu sites, EuI for 426-nm and EuII for 504-nm emissions, but only the green LLP appears at the EuII site. The emissions for both PL and LLP are due to the 5d→4f transitions. The green phosphorescence with the chromaticity coordination x=0.196, y=0.506 can still be observed in the dark for no less than 5 h by the naked eye. The results of TL show that Nd3+ ions induce the predominating band at 335 K, associated with the charge-trapping centers that are responsible for the appearance of intense green phosphorescence.

  3. A low-pass differentiation filter based on the 2nd-order B-spline wavelet for calculating augmentation index.

    PubMed

    He, Zijun; Zhang, Yongliang; Ma, Zuchang; Hu, Fusong; Sun, Yining

    2014-06-01

    The key point to calculate augmentation index (AIx) related to cardiovascular diseases is the precise identification of the shoulder point. The commonly used method for extracting the shoulder point is to calculate the fourth derivative of the pulse waveform by numerical differentiation. However, this method has a poor anti-noise capability and is computationally intensive. The aims of this study were to develop a new method based on the 2nd-order B-spline wavelet for calculating AIx, and to compare it with numerical differentiation and Savitzky-Golay digital differentiator (SGDD). All the three methods were applied to pulse waveforms derived from 60 healthy subjects. There was a significantly high correlation between the proposed method and numerical differentiation (r=0.998 for carotid pulses, and r=0.997 for radial pulses), as well as between the proposed method and the SGDD (r=0.995 for carotid pulses, and r=0.993 for radial pulses). In addition, the anti-noise capability of the proposed method was evaluated by adding simulated noise (>10Hz) on pulse waveforms. The results showed that the proposed method was advantageous in noise tolerance than the other two methods. These findings indicate that the proposed method can quickly and accurately calculate AIx with a good anti-noise capability.

  4. Report on 2nd Royan Institute International Summer School on developmental biology and stem cells Tehran, Iran, 17-22nd July 2011.

    PubMed

    Newgreen, Donald; Grounds, Miranda; Jesuthasan, Suresh; Rashidi, Hassan; Familari, Mary

    2012-03-01

    The 2nd Royan Institute International Summer School was built around the topic of stem cells and grounding in the discipline of developmental biology. The meeting provided not only direct transfer of technical and intellectual information, the normal process in scientific meetings, but was also a forum for the exchange of personal ideas of science as a creative pursuit. This summer school introduced aspiring young Iranian scientists to international researchers and exposed the latter to a rich culture that highly values learning and education, attested by the confident, intelligent young men and women who asked probing questions and who were eager to participate in the workshops. Hossein Baharvand's dedication and passion for science have led to an impressive record of national and international peer-reviewed publications and an increasing number of students who pursue science in Iran, and shows how the right people can create an environment where good science, good science education and motivation will flourish. This report summarizes some of the activities of the workshop in the Royan Institute and the impressions of the visiting scientists in the wider context of the scientific and cultural heritage of Iran.

  5. Report on the 2nd International Consortium on Hallucination Research: Evolving Directions and Top-10 “Hot Spots” in Hallucination Research

    PubMed Central

    Waters, Flavie

    2014-01-01

    This article presents a report on the 2nd meeting of the International Consortium on Hallucination Research, held on September 12th and 13th 2013 at Durham University, UK. Twelve working groups involving specialists in each area presented their findings and sought to summarize the available knowledge, inconsistencies in the field, and ways to progress. The 12 working groups reported on the following domains of investigation: cortical organisation of hallucinations, nonclinical hallucinations, interdisciplinary approaches to phenomenology, culture and hallucinations, subtypes of auditory verbal hallucinations, a Psychotic Symptoms Rating Scale multisite study, visual hallucinations in the psychosis spectrum, hallucinations in children and adolescents, Research Domain Criteria behavioral constructs and hallucinations, new methods of assessment, psychological therapies, and the Hearing Voices Movement approach to understanding and working with voices. This report presents a summary of this meeting and outlines 10 hot spots for hallucination research, which include the in-depth examination of (1) the social determinants of hallucinations, (2) translation of basic neuroscience into targeted therapies, (3) different modalities of hallucination, (4) domain convergence in cross-diagnostic studies, (5) improved methods for assessing hallucinations in nonclinical samples, (6) using humanities and social science methodologies to recontextualize hallucinatory experiences, (7) developmental approaches to better understand hallucinations, (8) changing the memory or meaning of past trauma to help recovery, (9) hallucinations in the context of sleep and sleep disorders, and (10) subtypes of hallucinations in a therapeutic context. PMID:24282321

  6. Results of on-line tests of the ENABLE prototype, a 2nd level trigger processor for the TRT of ATLAS/LHC

    SciTech Connect

    Noffz, K.H.; Kugel, A.; Klefenz, F.; Zoz, R.; Maenner, R.

    1994-12-31

    The Enable Machine is a systolic 2nd level trigger processor for the transition radiation tracker (TRT) of ATLAS/LHC. The task of the processor is to find the best candidate for a lepton track in a high background of pions according to the EAST benchmark algorithm in less than 10 {mu}s. As described earlier, this is done in three steps. First all interesting tracks are histogrammed by accumulating for each track the coincidences between the track mask and the region-of-interest (RoI). Next the best defined track is identified. Eventually this track is classified as e or {pi}. A prototype has been developed and tested within the EAST/RD-11 collaboration at CERN. It operates at 50 MHz and finds up to 400 tracks in less than 10 {mu}s. It is assembled of an interface board and one or more histogrammer boards. The modular design makes the Enable Machine easily scalable. The histogrammer units are systolic arrays consisting of a matrix of 36 field programmable gate arrays. Through this it is possible to optimize the trigger algorithm, to adapt it to a changed detector setup, and even to implement completely new algorithms. For the beam tests in autumn 1993 at CERN the overall functionality within the detector environment could be shown. The authors were able to link successfully the Enable prototype to the detector raw data stream as well as to the data acquisition.

  7. The effect of magnetic field annealing on the texture of 2nd recrystallization for a deformed Fe-3.2% Si steel sheet

    NASA Astrophysics Data System (ADS)

    Kim, Byung Geol; Part, Su Dong; Kim, Shang Shu

    2004-12-01

    The effects of deformation on 2nd recrystallization behavior with or without magnetic field for a 1st recrystallized electrical steel sheet have been investigated. Annealing temperatures (800, 1000 °C) and cold-rolling rates (50, 70 %) were experimental parameters. A magnetic field of 5 T using a superconducting magnet at a heating rate of 15 °C/min was applied in a direction parallel to the rolling direction. The intensity of α-fiber was increased due to the deformation and, in particular, the formation of {100}<110> component was tremendous. Considerable formation of {001}<100> component was also found. At 800 °C, α-fiber was developed rapidly due to deformation, and η-fiber was also formed in the components {100}<100> and {110}<100> The effect of magnetic field annealing was more significant at 800 °C, while the effect at 1000 °C was negligible. These results are discussed in a phenomenological context considering the atomic fluctuation and magnetic induction depending on annealing temperature and magnetic field.

  8. Stable isotopic evidence for diet at the Imperial Roman coastal site of Velia (1st and 2nd centuries AD) in Southern Italy.

    PubMed

    Craig, Oliver E; Biazzo, Marco; O'Connell, Tamsin C; Garnsey, Peter; Martinez-Labarga, Cristina; Lelli, Roberta; Salvadei, Loretana; Tartaglia, Gianna; Nava, Alessia; Renò, Lorena; Fiammenghi, Antonella; Rickards, Olga; Bondioli, Luca

    2009-08-01

    Here we report on a stable isotope palaeodietary study of a Imperial Roman population interred near the port of Velia in Southern Italy during the 1st and 2nd centuries AD. Carbon and nitrogen stable isotope analyses were performed on collagen extracted from 117 adult humans as well as a range of fauna to reconstruct individual dietary histories. For the majority of individuals, we found that stable isotope data were consistent with a diet high in cereals, with relatively modest contributions of meat and only minor contributions of marine fish. However, substantial isotopic variation was found within the population, indicating that diets were not uniform. We suggest that a number of individuals, mainly but not exclusively males, had greater access to marine resources, especially high trophic level fish. However, the observed dietary variation did not correlate with burial type, number of grave goods, nor age at death. Also, individuals buried at the necropolis at Velia ate much less fish overall compared with the contemporaneous population from the necropolis of Portus at Isola Sacra, located on the coast close to Rome. Marine and riverine transport and commerce dominated the economy of Portus, and its people were in a position to supplement their own stocks of fish with imported goods in transit to Rome, whereas at Velia marine exploitation existed side-by-side with land-based economic activities.

  9. General Physics, 2nd Edition

    NASA Astrophysics Data System (ADS)

    Sternheim, Morton M.; Kane, Joseph W.

    1991-01-01

    Introduces physics to science students with a wide range of interests. Unlike many other physics texts, the coverage and emphasis here is influenced by the specific needs of science majors, including those in the life sciences, and thus treats topics such as geometric optics, mechanics of fluids and acoustics. The derivative is introduced in Chapter One and integrals are used sparingly until electricity and magnetism are covered. Entire chapters are devoted to applications of physics covering subjects such as nerve conduction, ionizing radiation and nuclear magnetic resonance, demonstrating the widespread utility of physics and the unity of science. To aid in comprehension, calculations involving calculus are carried out with a good deal of detail and discussion. Each chapter features a checklist of terms to define or explain as well as problems and exercises. Additional problems and exercises are located in the Supplementary Topics section.

  10. Contaminant Hydrogeology, 2nd Edition

    NASA Astrophysics Data System (ADS)

    Smith, James E.

    Groundwater is a valuable resource that has received much attention over the last couple of decades. Extremely large sums of money have been and will be spent on groundwater contamination problems and the public has become increasingly sensitive to groundwater issues. Groundwater contamination has even become the subject of a major Hollywood movie with the recent release of A Civil Action starring John Travolta. The high profile of groundwater contaminant problems, the associated relatively strong job market over the last 20 years, and the general shift toward an environmental emphasis in science and engineering have resulted in a sustained high demand for senior undergraduate courses and graduate programs in hydrogeology Many voice the opinion that we have seen the peak demand for hydrogeologists pass, but the placement of graduates from hydrogeology programs into career-oriented positions has remained very high.

  11. Sedimentary petrology. 2nd edition

    SciTech Connect

    Blatt, H.

    1992-01-01

    The second edition of Sedimentary Petrology is extensively revised and updated; much effort has been expended to strengthen the weaknesses of the earlier edition, and much of this effort has been successful. It consists of sixteen chapters. Following two introductory chapters (occurrence of sedimentary rocks; weathering and soils), eleven chapters cover the various sedimentary rock types. Coverage is allocated in proportion to their relative abundance and relative ease of study -- three chapters on conglomerates and sandstones (textures and structures, composition, and diagenesis); one on mud rocks; three on carbonates (limestone textures, structures, and environments; limestone mineralogy and diagenesis; and dolostones); and one each on evaporites, cherts, iron-rich rocks, and phosphorites. A novel and useful chapter on paleogeothermometry rounds out the discussion of rocks, followed by chapters on The Development of a Research Project'' and common laboratory methods.

  12. Aquatic pollution, 2nd ed

    SciTech Connect

    Laws, E.A.

    1993-01-01

    This book systematically covers all aspects of water pollution in marine and freshwater systems. Didactic style, frequent use of case studies and an extensive bibliography facilitate understanding of fundamental concepts. Offers basic, relevant ecological and toxicological information. Straightforward presentation of the scientific aspects of environmental issues. Information updated, particularly the discussion of toxicology and the case studies of water pollution. Three new chapters on acid rain, groundwater pollution and plastics are added.

  13. Longwall mining. 2nd ed.

    SciTech Connect

    Peng, S.S.

    2006-10-15

    The book covers US longwall mining technology that was developed and practiced in the US for the past 30 years. It covers all phases of longwall technology in 14 chapters. Each chapter is devoted to a subsystem of equipment or engineering technology. Each chapter begins with a brief introduction on the historical trends of development of the subsystem equipment or engineering technology, followed by a detailed description of the subsystem and engineering technology as they are practiced in the US today.

  14. Electromagnetic Fields, 2nd Edition

    NASA Astrophysics Data System (ADS)

    Wangsness, Roald K.

    1986-07-01

    This revised edition provides patient guidance in its clear and organized presentation of problems. It is rich in variety, large in number and provides very careful treatment of relativity. One outstanding feature is the inclusion of simple, standard examples demonstrated in different methods that will allow students to enhance and understand their calculating abilities. There are over 145 worked examples; virtually all of the standard problems are included.

  15. Modern Physics, 2nd Edition

    NASA Astrophysics Data System (ADS)

    Krane, Kenneth S.

    1995-08-01

    Bring Modern Physics to Life with a Realistic Software Simulation! Enhance the thorough coverage of Krane's Modern Physics 2e with hands-on, real-world experience! Modern Physics Simulations, developed by the Consortium for Upper-Level Physics Software (CUPS), offers complex, realistic calculations of models of various physical systems. Like all of the CUPS simulations, it is remarkably easy to use, yet sophisticated enough for explorations of new ideas. Important Features Include: * Powerful simulations covering Historic Experiments in Electron Diffraction, Laser Cavities & Dynamics, Classical Scattering, Nuclear Properties & Decays, Special Relativity, Quantum Mechanics, and the Hydrogen Atom & the H2+ Molecule. * Pascal source code for all programs and a number of exercises suggesting specific ways the programs can be modified. * Graphical (often animated) displays in most simulations. The entire CUPS simulation series consists of nine books/software simulations which cover Astrophysics, Electricity and Magnetism, Classical Mechanics, Modern Physics, Quantum Mechanics, Nuclear and Particle Physics, Solid State Physics, Thermal and Statistical Physics, and Waves and Optics.

  16. MTRETR MAINTENANCE SHOP, TRA653. FLOOR PLAN FOR FIRST FLOOR: MACHINE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    MTR-ETR MAINTENANCE SHOP, TRA-653. FLOOR PLAN FOR FIRST FLOOR: MACHINE SHOP, ELECTRICAL AND INSTRUMENT SHOP, TOOL CRIB, ELECTRONIC SHOP, LOCKER ROOM, SPECIAL TEMPERATURE CONTROLLED ROOM, AND OFFICES. "NEW" ON DRAWING REFERS TO REVISION OF 11/1956 DRAWING ON WHICH AREAS WERE DESIGNATED AS "FUTURE." HUMMEL HUMMEL & JONES 810-MTR-ETR-653-A-7, 5/1957. INL INDEX NO. 532-0653-00-381-101839, REV. 2. - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

  17. A&M. TAN607 floor plan for first floor. Shows stepped door ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    A&M. TAN-607 floor plan for first floor. Shows stepped door plug design from hot shop into special services cubicle, cubicle windows, and other details. This drawing was re-drawn to show as-built conditions in 1985. Ralph M. Parsons 902-3-ANP-607-A 99. Date of original: January 1955. Approved by INEEL Classification Office for public release. INEEL index code no. 034-0607-00-693-106751 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

  18. Buffing, burnishing, and stripping of vinyl asbestos floor tile

    SciTech Connect

    Hollett, B.A.; Edwards, A.; Clark, P.J.

    1995-10-01

    Studies were conducted to evaluate airborne asbestos concentrations during the three principal types of preventative maintenance (low-speed spray-buffing, ultra high-speed burnishing, and wet-stripping) used on asbestos-containing floor tiles. These were done under pre-existing and prepared levels of floor care maintenance. Airborne asbestos concentrations were measured before and during each floor care procedure to determine the magnitude of the increase in airborne asbestos levels during each procedure. Airborne total fiber concentrations were also measured for comparison with the Occupational Safety and Health Administration`s (OSHA) Permissible Exposure Limit (PEL) of 0.1 f/cm{sup 3}. Low-speed spray-buffing and wet-stripping were evaluated on pre-existing floor conditions and three levels of prepared floor care conditions (poor, medium, and good). Ultra high-speed burnishing and wet-stripping were evaluated on two levels of prepared floor care conditions (poor and good). Floor care conditions were defined in consultation with the Chemical Specialty Manufacturers Association and other representatives of floor-care chemical manufacturers. Controlled studies were conducted in an unoccupied building at the decommissioned Chanute Air Force Base in Rantoul, Illinois, with the cooperation of the U.S. Air Force. The building offered approximately 8600 ft{sup 2} of open floor space tiled with 9-inch by 9-inch resilient floor tile containing approximately 5% chrysotile asbestos.

  19. Deflection of resilient materials for reduction of floor impact sound.

    PubMed

    Lee, Jung-Yoon; Kim, Jong-Mun

    2014-01-01

    Recently, many residents living in apartment buildings in Korea have been bothered by noise coming from the houses above. In order to reduce noise pollution, communities are increasingly imposing bylaws, including the limitation of floor impact sound, minimum thickness of floors, and floor soundproofing solutions. This research effort focused specifically on the deflection of resilient materials in the floor sound insulation systems of apartment houses. The experimental program involved conducting twenty-seven material tests and ten sound insulation floating concrete floor specimens. Two main parameters were considered in the experimental investigation: the seven types of resilient materials and the location of the loading point. The structural behavior of sound insulation floor floating was predicted using the Winkler method. The experimental and analytical results indicated that the cracking strength of the floating concrete floor significantly increased with increasing the tangent modulus of resilient material. The deflection of the floating concrete floor loaded at the side of the specimen was much greater than that of the floating concrete floor loaded at the center of the specimen. The Winkler model considering the effect of modulus of resilient materials was able to accurately predict the cracking strength of the floating concrete floor.

  20. Ocean Floor Geomagnetic Data Collection System.

    DTIC Science & Technology

    1982-12-01

    gOoPoCS1o41a or too$ 000g¢fe .oe gmo Item 20. (continued) acquisition time, synchronization with land site data. and a data format that is readily...collection systemi co ,)s.st ad of two channels, each with a coil artenna sensor,, oreamplifier, variable gain amplifier, voltage ontrol .’ oscillator...Line Buoyancy Sphere Instrumentation I Sphere I Two 30 Meter I Coaxial Cables Sensor Spheres en , Non -me taic Stand Sea Floor Figure 1. 2 Diagram af

  1. Physical activity and the pelvic floor.

    PubMed

    Nygaard, Ingrid E; Shaw, Janet M

    2016-02-01

    Pelvic floor disorders are common, with 1 in 4 US women reporting moderate to severe symptoms of urinary incontinence, pelvic organ prolapse, or fecal incontinence. Given the high societal burden of these disorders, identifying potentially modifiable risk factors is crucial. Physical activity is one such potentially modifiable risk factor; the large number of girls and women participating in sport and strenuous training regimens increases the need to understand associated risks and benefits of these exposures. The aim of this review was to summarize studies reporting the association between physical activity and pelvic floor disorders. Most studies are cross-sectional and most include small numbers of participants. The primary findings of this review include that urinary incontinence during exercise is common and is more prevalent in women during high-impact sports. Mild to moderate physical activity, such as brisk walking, decreases both the odds of having and the risk of developing urinary incontinence. In older women, mild to moderate activity also decreases the odds of having fecal incontinence; however, young women participating in high-intensity activity are more likely to report anal incontinence than less active women. Scant data suggest that in middle-aged women, lifetime physical activity increases the odds of stress urinary incontinence slightly and does not increase the odds of pelvic organ prolapse. Women undergoing surgery for pelvic organ prolapse are more likely to report a history of heavy work than controls; however, women recruited from the community with pelvic organ prolapse on examination report similar lifetime levels of strenuous activity as women without this examination finding. Data are insufficient to determine whether strenuous activity while young predisposes to pelvic floor disorders later in life. The existing literature suggests that most physical activity does not harm the pelvic floor and does provide numerous health benefits for

  2. Female pelvic floor anatomy: the pelvic floor, supporting structures, and pelvic organs.

    PubMed

    Herschorn, Sender

    2004-01-01

    The development of novel, less invasive therapies for stress urinary incontinence in women requires a thorough knowledge of the relationship between the pathophysiology of incontinence and anatomy. This article provides a review of the anatomy of the pelvic floor and lower urinary tract. Also discussed is the hammock hypothesis, which describes urethral support within the pelvis and provides an explanation of the continence mechanism.

  3. 115. Stage Level floor structure. Detail of the ends of ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    115. Stage Level floor structure. Detail of the ends of three movable stage floor sections. An inclined steel angle track attached to the web of the floor beam allows the sections to roll under the fixed floor. The upper section of the inclined track is hinged so it can be moved upward by a cam mechanism to raise the end of the movable section level with the stage floor. A similar mechanism was used to open and close the floor sections for the star lifts (see sheet 4 of 9, note 6; sheet 8 of 9, details 5, 6A and 6B; sheet 6 of 9, notes 2A, 2B, and 3; and photo IL-1007-120). The pulley, and tongue extending out from the end of the movable section, were used to move the sections back and forth. - Auditorium Building, 430 South Michigan Avenue, Chicago, Cook County, IL

  4. Female pelvic floor dysfunction--an imaging perspective.

    PubMed

    Dietz, Hans Peter

    2011-12-20

    Female pelvic floor dysfunction encompasses a range of morbidities, including urinary incontinence, female pelvic organ prolapse, anal incontinence and obstructed defecation. Patients often present with symptoms covered by several specialties including gastroenterology, colorectal surgery, urology and gynecology. Imaging can therefore bring clinicians from multiple specialties together by revealing that we frequently deal with different aspects of one underlying problem or pathophysiological process. This article provides an interdisciplinary imaging perspective on the pelvic floor. Modern pelvic floor imaging comprises defecation proctography, translabial and endorectal ultrasound, and static and dynamic MRI. This Perspectives focuses on the potential use of translabial ultrasound, including 3D and 4D applications, for diagnosis of pelvic floor disorders. Over the next decade, pelvic floor imaging will most likely be integrated into mainstream diagnostics in obstetrics and gynecology and colorectal surgery. Using imaging to facilitate communication between different specialties has the potential to greatly improve the multidisciplinary management of complex pelvic floor disorders.

  5. The influence of different footwear on floor contamination.

    PubMed

    Hambraeus, A; Malmborg, A S

    1979-01-01

    The importance of walking as a source of floor contamination and the influence of different footwear routines on floor contamination was evaluated. The contamination of a floor due to walking was about 16 times higher than contamination of the floor due to sedimentation only, measured with impression plates. No significant difference in floor contamination could be seen with different footwear (ordinary shoes, clean shoes, shoe covers). In all experiments the amount of bacteria, was low in the morning and increased in the middle of the day when a steady state seemed to be reached. The number of Staphylococcus aureus continued to increase. A footwear regimen is only recommended in areas where floors are cleaned frequently during the day as in operating wards.

  6. The truncated Newton using 1st and 2nd order adjoint-state method: a new approach for traveltime tomography without rays

    NASA Astrophysics Data System (ADS)

    Bretaudeau, F.; Metivier, L.; Brossier, R.; Virieux, J.

    2013-12-01

    named as the truncated Newton (TCN) (Métivier et al. 2012) with a more accurate estimation of the impact of the Hessian. We propose an efficient implementation for first-arrival traveltime tomography. In TCN, the model update Δm is obtained through the iterative resolution of the Newton linear system H Δm = - g. Based on a matrix-free conjugate gradient resolution, the iterative solver requires only the computation of the gradient and of Hessian-vector products. We propose a generalization of the computation of the gradient using the adjoint-state method that allows to consider receivers located anywhere. Then the Hessian-vector products are computed using an original formulation based on a 2nd-order adjoint-state method, at the cost of an additional forward modeling. The TCN algorithm is composed of two nested loops: an internal loop to compute Δm, and an external loop where a line search is performed to update the subsurface parameters. TCN thus considers locally the inversion of the traveltime data using an estimation of the full Hessian (both 1st and 2nd order terms) at an acceptable cost. Tomography with TCN is an improvement over the simple gradient-based adjoint-state tomography due to its good convergence property, to the better consideration of illumination, and is a promising tool for multi-parameter inversion as rescaling is given by the Hessian.

  7. 48. STAIRWAY TO THE SECOND FLOOR, SOUTH END OF THE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    48. STAIRWAY TO THE SECOND FLOOR, SOUTH END OF THE EAST WING. STAIRWAY AND WOODEN DECK ADDED IN 1976. WOODEN DECK FILLS A CIRCULAR HOLE LEFT IN THE FLOOR FOR THE POSSIBLE ADDITION OF A THIRD BISCUIT AND KILN. A SMALLER HOLE WAS LEFT IN THE WEST WING FLOOR TO ALLOW CONSTRUCTION OF AN ADDITIONAL GLAZE KILN. NEITHER EXTRA KILN WAS BUILT. - Moravian Pottery & Tile Works, Southwest side of State Route 313 (Swamp Road), Northwest of East Court Street, Doylestown, Bucks County, PA

  8. Calibrating floor field cellular automaton models for pedestrian dynamics by using likelihood function optimization

    NASA Astrophysics Data System (ADS)

    Lovreglio, Ruggiero; Ronchi, Enrico; Nilsson, Daniel

    2015-11-01

    The formulation of pedestrian floor field cellular automaton models is generally based on hypothetical assumptions to represent reality. This paper proposes a novel methodology to calibrate these models using experimental trajectories. The methodology is based on likelihood function optimization and allows verifying whether the parameters defining a model statistically affect pedestrian navigation. Moreover, it allows comparing different model specifications or the parameters of the same model estimated using different data collection techniques, e.g. virtual reality experiment, real data, etc. The methodology is here implemented using navigation data collected in a Virtual Reality tunnel evacuation experiment including 96 participants. A trajectory dataset in the proximity of an emergency exit is used to test and compare different metrics, i.e. Euclidean and modified Euclidean distance, for the static floor field. In the present case study, modified Euclidean metrics provide better fitting with the data. A new formulation using random parameters for pedestrian cellular automaton models is also defined and tested.

  9. The 1st and the 2nd Italian Consensus Conferences on low-density lipoprotein-apheresis. A practical synopsis and update

    PubMed Central

    Stefanutti, Claudia

    2017-01-01

    The clinical indications and guidelines for low-density lipoprotein (LDL)-apheresis set by the 1st Italian Consensus Conference held in Ostuni in 1990 and completed in 1992, but never published, are reported schematically. In 1994, within the Project “Prevention and control of the factors of the disease (FATMA)” by the Italian National Research Council, subproject 8 “Control of cardiovascular disease”, a “Hearing on therapeutic apheresis: need for a target-oriented project” was organised. The meeting was the last scientific initiative on LDL-apheresis supported by public funds in Italy. After roughly two decades of use of LDL-apheresis, new guidelines were required based on the latest scientific evidence. In 2006, the Italian multicentre study on LDL-apheresis Working Group (IMSLDLa-WP), a scientific initiative at national level, was developed. It initially gathered together 19 Italian centres qualified for the application of lipid apheresis and LDL-apheresis (2007–2008), then 23 in 2010, located in the north, south, centre of Italy and in Sicily and Sardinia. The multicentre study aimed to validate the protocol for selecting patients and to create a network between the Italian centres. A secondary objective was the creation of a database of patients with familial hypercholesterolaemia and other severe forms of dyslipidaemia undergoing treatment with LDL-apheresis using the available techniques. Since LDL-apheresis has multidisciplinary treatment indications, the agreement on the new guidelines was reached through a panel of experts, of different medical and surgical specialties, with scientific and medical interest in the treatment indications, application and development of LDL-apheresis. The initiatives of the IMSLDLa-WP led to the 2nd Italian Consensus Conference on LDL-apheresis held in Rome in 2009. The previous and most recent guidelines are reported here synoptically. PMID:27416576

  10. 2nd International Symposium on Fundamental Aspects of Rare-earth Elements Mining and Separation and Modern Materials Engineering (REES-2015)

    NASA Astrophysics Data System (ADS)

    Tavadyan, Levon, Prof; Sachkov, Viktor, Prof; Godymchuk, Anna, Dr.; Bogdan, Anna

    2016-01-01

    The 2nd International Symposium «Fundamental Aspects of Rare-earth Elements Mining and Separation and Modern Materials Engineering» (REES2015) was jointly organized by Tomsk State University (Russia), National Academy of Science (Armenia), Shenyang Polytechnic University (China), Moscow Institute of Physics and Engineering (Russia), Siberian Physical-technical Institute (Russia), and Tomsk Polytechnic University (Russia) in September, 7-15, 2015, Belokuriha, Russia. The Symposium provided a high quality of presentations and gathered engineers, scientists, academicians, and young researchers working in the field of rare and rare earth elements mining, modification, separation, elaboration and application, in order to facilitate aggregation and sharing interests and results for a better collaboration and activity visibility. The goal of the REES2015 was to bring researchers and practitioners together to share the latest knowledge on rare and rare earth elements technologies. The Symposium was aimed at presenting new trends in rare and rare earth elements mining, research and separation and recent achievements in advanced materials elaboration and developments for different purposes, as well as strengthening the already existing contacts between manufactures, highly-qualified specialists and young scientists. The topics of the REES2015 were: (1) Problems of extraction and separation of rare and rare earth elements; (2) Methods and approaches to the separation and isolation of rare and rare earth elements with ultra-high purity; (3) Industrial technologies of production and separation of rare and rare earth elements; (4) Economic aspects in technology of rare and rare earth elements; and (5) Rare and rare earth based materials (application in metallurgy, catalysis, medicine, optoelectronics, etc.). We want to thank the Organizing Committee, the Universities and Sponsors supporting the Symposium, and everyone who contributed to the organization of the event and to

  11. Early onset hypercholesterolemia induced by the 2nd-generation tyrosine kinase inhibitor nilotinib in patients with chronic phase-chronic myeloid leukemia.

    PubMed

    Rea, Delphine; Mirault, Tristan; Cluzeau, Thomas; Gautier, Jean-François; Guilhot, François; Dombret, Hervé; Messas, Emmanuel

    2014-07-01

    Despite a well-recognized clinical benefit of the 2(nd)-generation tyrosine kinase inhibitor nilotinib in patients with imatinib-resistant/-intolerant or newly diagnosed chronic myeloid leukemia, recent evidence suggests that nilotinib has a propensity to increase the risk of occlusive arterial events, especially in patients with pre-existing cardiovascular risk factors. Given the key role of lipids in cardiovascular diseases, we studied the plasma lipid profile and global cardiovascular risk prior to and during nilotinib therapy in a series of 27 patients in the setting of a prospective single center study. Data from a minimum 1-year follow up showed that nilotinib significantly increased total, low- and high-density lipoprotein cholesterol within three months. Consequently, the proportion of patients with non-optimal low-density lipoprotein cholesterol increased from 48.1% to 88.9% by 12 months, leading to cholesterol-lowering drug intervention in 22.2% of patients. The proportion of patients with low levels of high-density lipoprotein cholesterol decreased from 40.7% to 7.4% by 12 months. In contrast, a significant decrease in triglycerides was observed. Global cardiovascular risk worsened in 11.1% of patients due to diabetes or occlusive arterial events. Whether hypercholesterolemia was the main driver of occlusive arterial events was uncertain: a longer follow up is necessary to ask whether nilotinib-induced hypercholesterolemia increases long-term risk of atherosclerotic diseases. Nevertheless, given key atherogenic properties of low-density lipoprotein cholesterol, we conclude that when prescribing nilotinib, commitment to detect lipid disorders at baseline and during follow up is mandatory given their frequency, requirement for changes in lifestyle or drug intervention, and potential for long-term cardiovascular complications.

  12. Direct and non-destructive proof of authenticity for the 2nd generation of Brazilian real banknotes via easy ambient sonic spray ionization mass spectrometry.

    PubMed

    Schmidt, Eduardo Morgado; Franco, Marcos Fernando; Regino, Karen Gomes; Lehmann, Eraldo Luiz; Arruda, Marco Aurélio Zezzi; de Carvalho Rocha, Werickson Fortunato; Borges, Rodrigo; de Souza, Wanderley; Eberlin, Marcos Nogueira; Correa, Deleon Nascimento

    2014-12-01

    Using a desorption/ionization technique, easy ambient sonic-spray ionization coupled to mass spectrometry (EASI-MS), documents related to the 2nd generation of Brazilian Real currency (R$) were screened in the positive ion mode for authenticity based on chemical profiles obtained directly from the banknote surface. Characteristic profiles were observed for authentic, seized suspect counterfeit and counterfeited homemade banknotes from inkjet and laserjet printers. The chemicals in the authentic banknotes' surface were detected via a few minor sets of ions, namely from the plasticizers bis(2-ethylhexyl)phthalate (DEHP) and dibutyl phthalate (DBP), most likely related to the official offset printing process, and other common quaternary ammonium cations, presenting a similar chemical profile to 1st-generation R$. The seized suspect counterfeit banknotes, however, displayed abundant diagnostic ions in the m/z 400-800 range due to the presence of oligomers. High-accuracy FT-ICR MS analysis enabled molecular formula assignment for each ion. The ions were separated by 44 m/z, which enabled their characterization as Surfynol® 4XX (S4XX, XX=40, 65, and 85), wherein increasing XX values indicate increasing amounts of ethoxylation on a backbone of 2,4,7,9-tetramethyl-5-decyne-4,7-diol (Surfynol® 104). Sodiated triethylene glycol monobutyl ether (TBG) of m/z 229 (C10H22O4Na) was also identified in the seized counterfeit banknotes via EASI(+) FT-ICR MS. Surfynol® and TBG are constituents of inks used for inkjet printing.

  13. PREFACE: 2nd International School and Conference Saint-Petersburg OPEN on Optoelectronics, Photonics, Engineering and Nanostructures (SPbOPEN2015)

    NASA Astrophysics Data System (ADS)

    2015-11-01

    The 2nd International School and Conference ''Saint Petersburg OPEN 2015'' on Optoelectronics, Photonics, Engineering and Nanostructures was held on April 6 - 8, 2015 at St. Petersburg Academic University. The School and Conference included a series of invited talks given by leading professors with the aim to introduce young scientists with actual problems and major advances in physics and technology. The keynote speakers were Mikhail V. Maximov (Ioffe Physico-Technical Institute RAS, Russia) Vladimir G. Dubrovskii (St. Petersburg Academic University and St. Petersburg State University, Russia) Anton Yu. Egorov (JSC Connector Optics, Russia) Victor V. Luchinin (St. Petersburg State Electrotechnical University, Russia) Vladislav E. Bugrov (St. Petersburg University of Internet Technologies, Mechanics and Optics, Russia) Vitali A. Schukin (VI Systems, Germany) Yuri P. Svirko (University of Eastern Finland, Finland) During the poster session all undergraduate and graduate students attending the conference presented their works. A sufficiently large number of participants, with more than 170 student attendees from all over the world, allowed the Conference to provide a fertile ground for fruitful discussions between the young scientists as well as to become a perfect platform for valuable discussions between student authors and highly experienced scientists. The best student papers, which were selected by the Program Committee and by the invited speakers basing on the theses and their poster presentation, were awarded with diplomas of the conference - see the photos. This year ''Saint Petersburg OPEN 2015'' is organized by St. Petersburg Academic University in cooperation with Peter the Great St. Petersburg Polytechnic University. The School and Conference is supported by Russian Science Foundation, SPIE (The International Society for Optics and Photonics), OSA (The Optical Society) and by Skolkovo Foundation. It is a continuation of the annual schools and seminars for

  14. Audit of primary care electrocardiograms sent as emergency to a telehealth service - the Telehealth Network of Minas Gerais, Brazil.

    PubMed

    Marcolino, Milena S; Carvalho, Bárbara C; Lucena, Aline M; França, Ana Luiza N; Pessoa, Cristiane G; Neves, Daniel S; Alkmim, Maria Beatriz M

    2015-01-01

    The Telehealth Network of Minas Gerais (TNMG) is a public telehealth service in Brazil that has performed electrocardiogram (ECG) analysis since 2005. From February to March 2014, 28% of ECGs were classified as "emergency" by the primary care tele-health sites. This quasi-experimental study aimed to investigate the reasons behind the high number of emergency ECGs being sent in, the implementation of corrective actions, and an assessment of the impact of these actions. In the 1st phase, primary care units that sent >70% of ECGs as emergency from February to March 2014 were selected. The 2nd phase consisted of the intervention. In the 3rd phase, the proportion of ECGs sent as an emergency during the 1st and 2nd months post intervention were assessed. Of the 63 cities selected during the 1st phase, 50% of the practitioners did not know the proper definition of emergency. After the intervention, 67% of the cities had a significant reduction in the proportion of ECGs sent as an emergency during the 1st month, and 17% had a significant reduction during the 2nd month.

  15. 18. First floor, sun porch room, looking north Veterans ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    18. First floor, sun porch room, looking north - Veterans Administration Center, Officers Duplex Quarters, 5302 East Kellogg (Legal Address); 5500 East Kellogg (Common Address), Wichita, Sedgwick County, KS

  16. site plan, floor plan, southeast and east elevations, detail showing ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    site plan, floor plan, southeast and east elevations, detail showing original front entrance, interior detail showing fireplace in elevation - Neiman House, 1930 Providence Road, Charlotte, Mecklenburg County, NC

  17. 9. FIRST FLOOR CAR BARN SPACE. VIEW TO NORTHWEST. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    9. FIRST FLOOR CAR BARN SPACE. VIEW TO NORTHWEST. - Commercial & Industrial Buildings, Key City Electric Street Railroad, Powerhouse & Storage Barn, Eighth & Washington Streets, Dubuque, Dubuque County, IA

  18. Ergonomic Assessment of Floor-based and Overhead Lifts

    PubMed Central

    Waters, Thomas R.; Dick, Robert; Lowe, Brian; Werren, Dwight; Parsons, Kelley

    2015-01-01

    Manual full-body vertical lifts of patients have high risk for developing musculoskeletal disorders. Two primary types of battery-powered lift assist devices are available for these tasks: floor-based and overhead-mounted devices. Studies suggest that the operation of floor-based devices may require excessive pushing and pulling forces and that overhead-mounted devices are safer and require lower operating forces. This study evaluated required operating hand forces and resulting biomechanical spinal loading for overhead-mounted lifts versus floor-based lifts across various floor surfaces and patient weight conditions. We did not examine differences in how operators performed the tasks, but rather focused on differences in required operating forces and estimated biomechanical loads across various exposure conditions for a typical operator. Findings show that the floor-based lifts exceeded recommended exposure limits for pushing and pulling for many of the floor/weight conditions and that the overhead-mounted lifts did not. As expected, forces and spinal loads were greater for nonlinoleum floor surfaces compared with linoleum floors. Based on these findings, it is suggested that overhead-mounted devices be used whenever possible, particularly in instances where carpeted floors would be encountered. PMID:26550545

  19. INTERIOR OF SECOND FLOOR AIRFIELD MANAGEMENT SUPERINTENDENT'S OFFICE. VIEW TO ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    INTERIOR OF SECOND FLOOR AIRFIELD MANAGEMENT SUPERINTENDENT'S OFFICE. VIEW TO SOUTHEAST - Plattsburgh Air Force Base, Base Operations Building, Idaho at Alabama Avenue, Plattsburgh, Clinton County, NY

  20. Pelvic Organ Prolapse: New Concepts in Pelvic Floor Anatomy.

    PubMed

    Maldonado, Pedro A; Wai, Clifford Y

    2016-03-01

    As the field of reconstructive pelvic surgery continues to evolve, with descriptions of new procedures to repair pelvic organ prolapse, it remains imperative to maintain a functional understanding of pelvic floor anatomy and support. The goal of this review was to provide a focused, conceptual approach to differentiating anatomic defects contributing to prolapse in the various compartments of the vagina. Rather than provide exhaustive descriptions of pelvic floor anatomy, basic pelvic floor anatomy is reviewed, new and historical concepts of pelvic floor support are discussed, and relevance to the surgical management of specific anatomic defects is addressed.

  1. [Use of bone blocks by sinus floor lifting].

    PubMed

    Nazarian, D N; Karaian, A S; Zakharov, G K; Seniuk, A N; Aliev, S E

    2014-01-01

    The paper presents clinical cases illustrating two sinus floor lifting technique performed for dental implant placement in areas with maxillary sinus floor atrophy: bone block fixation for vertical augmentation (used for immediate implant placement by sinus floor atrophy to 1 mm thickness) and perforation closure. Sinus floor perforations wider than 5 mm were repaired by mandible bone graft providing the possibility of immediate implantation. Bone block was fixed between cortical layers of the maxilla with no internal fixation. Free bone blocks provide additional primary stability of dental implants.

  2. 19. CLASSROOM 312 (SECOND FLOOR). VIEW TO SOUTHWEST. OTHER CENTRAL ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    19. CLASSROOM 312 (SECOND FLOOR). VIEW TO SOUTHWEST. OTHER CENTRAL (SOUTH) BLOCK CLASSROOMS ARE SIMILAR - Frederika Bremer Intermediate School, 1214 Lowry Avenue North, Minneapolis, Hennepin County, MN

  3. 13. VIEW INTO BLOCK AREA SHOWING KEY MECHANISM, NOTE FLOOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    13. VIEW INTO BLOCK AREA SHOWING KEY MECHANISM, NOTE FLOOR SEPARATION AT THRESHOLD AND KEY-WINDING MECHANISM - Montgomery County Jail, Washington & Spring Streets, Crawfordsville, Montgomery County, IN

  4. Interior view of second floor sleeping area; camera facing south. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Interior view of second floor sleeping area; camera facing south. - Mare Island Naval Shipyard, Marine Barracks, Cedar Avenue, west side between Twelfth & Fourteenth Streets, Vallejo, Solano County, CA

  5. INTERIOR FIRST FLOOR WEST CENTRAL ELEVATOR LOBBY DETAIL VIEW, FACING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    INTERIOR FIRST FLOOR WEST CENTRAL ELEVATOR LOBBY DETAIL VIEW, FACING SOUTHEAST. - NASA Industrial Plant, Systems Integration & Checkout Facility, 12214 Lakewood Boulevard, Downey, Los Angeles County, CA

  6. Distinct modes of floor plate induction in the chick embryo.

    PubMed

    Patten, Iain; Kulesa, Paul; Shen, Michael M; Fraser, Scott; Placzek, Marysia

    2003-10-01

    To begin to reconcile models of floor plate formation in the vertebrate neural tube, we have performed experiments aimed at understanding the development of the early floor plate in the chick embryo. Using real-time analyses of cell behaviour, we provide evidence that the principal contributor to the early neural midline, the future anterior floor plate, exists as a separate population of floor plate precursor cells in the epiblast of the gastrula stage embryo, and does not share a lineage with axial mesoderm. Analysis of the tissue interactions associated with differentiation of these cells to a floor plate fate reveals a role for the nascent prechordal mesoderm, indicating that more than one inductive event is associated with floor plate formation along the length of the neuraxis. We show that Nr1, a chick nodal homologue, is expressed in the nascent prechordal mesoderm and we provide evidence that Nodal signalling can cooperate with Shh to induce the epiblast precursors to a floor-plate fate. These results indicate that a shared lineage with axial mesoderm cells is not a pre-requisite for floor plate differentiation and suggest parallels between the development of the floor plate in amniote and anamniote embryos.

  7. 5. GENERAL VIEW, SECOND FLOOR, SHOWING TYPICAL WINDOW TRIM AND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. GENERAL VIEW, SECOND FLOOR, SHOWING TYPICAL WINDOW TRIM AND THE PRESSED METAL CEILING, VIEW FROM SOUTHWEST. - 443 Seventh Street, Northwest (Commercial Building), Washington, District of Columbia, DC

  8. INTERIOR SECOND FLOOR EAST ENGINEERING DESIGN AREA DETAIL VIEW, FACING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    INTERIOR SECOND FLOOR EAST ENGINEERING DESIGN AREA DETAIL VIEW, FACING NORTH. - NASA Industrial Plant, Systems Integration & Checkout Facility, 12214 Lakewood Boulevard, Downey, Los Angeles County, CA

  9. 13. FOURTH FLOOR ROASTING ROOM, SHOWING CLERESTORY. VIEW TO SOUTH. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    13. FOURTH FLOOR ROASTING ROOM, SHOWING CLERESTORY. VIEW TO SOUTH. - Commercial & Industrial Buildings, McFadden Coffee & Spice Company, Factory & Warehouse, 145 First Street, Dubuque, Dubuque County, IA

  10. 19. VIEW TO SOUTHWEST OF FIRST FLOOR SHOWING CONVEYOR FOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    19. VIEW TO SOUTHWEST OF FIRST FLOOR SHOWING CONVEYOR FOR MOVING MATERIAL TO SECOND FLOOR. (NOTE: THIS IS NOT AN ORIGINAL CONVEYOR FOR MOVING BODY PARTS) STAIRS IN BACKGROUND LEAD TO SECOND FLOOR VIA TOILET ROOM NO. 4 AND COAT ROOM AT MEZZANINES LEVEL SITUATED BETWEEN THE TWO SETS OF STAIRS. THERE ARE THREE OTHER TOILET/COAT ROOM MEZZANINES TO THE NORTH LOCATED ALONG THE WALL BETWEEN THE FIRST AND SECOND FLOORS, BEHIND AND TO THE LEFT OF THE STAIRS IS A FREIGHT ELEVATOR SHAFT. - Rosie the Riveter National Historical Park, Ford Assembly Plant, 1400 Harbour Way South, Richmond, Contra Costa County, CA

  11. 95. ROOM 402 (LAW LIBRARY), EAST WING, FOURTH FLOOR, LOOKING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    95. ROOM 402 (LAW LIBRARY), EAST WING, FOURTH FLOOR, LOOKING SOUTHEAST - Smithsonian Institution Building, 1000 Jefferson Drive, between Ninth & Twelfth Streets, Southwest, Washington, District of Columbia, DC

  12. 13. DISPATCHER'S OFFICE OF SECOND FLOOR HEAD HOUSE. VIEW TO ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    13. DISPATCHER'S OFFICE OF SECOND FLOOR HEAD HOUSE. VIEW TO NORTHEAST. - Commercial & Industrial Buildings, Chicago, Milwaukee & St. Paul Railroad Freight Depot, Sixth & White Streets, Dubuque, Dubuque County, IA

  13. 14. DISPATCHER'S OFFICE OF SECOND FLOOR HEAD HOUSE. VIEW TO ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    14. DISPATCHER'S OFFICE OF SECOND FLOOR HEAD HOUSE. VIEW TO SOUTH. - Commercial & Industrial Buildings, Chicago, Milwaukee & St. Paul Railroad Freight Depot, Sixth & White Streets, Dubuque, Dubuque County, IA

  14. Emergency contraception

    MedlinePlus

    Morning-after pill; Postcoital contraception; Birth control - emergency; Plan B; Family planning - emergency contraception ... Emergency contraception most likely prevents pregnancy in the same way as regular birth control pills: By preventing or delaying ...

  15. Emergency Contraception

    MedlinePlus

    ... contraception are available: emergency contraceptive pills and the copper-containing intrauterine device (IUD).Emergency contraceptive pills include ... for emergency use, talk to your doctor.The copper-containing IUD (brand name: Paragard) is a small, ...

  16. PHYSICAL ACTIVITY AND THE PELVIC FLOOR

    PubMed Central

    Nygaard, Ingrid E.; Shaw, Janet M.

    2015-01-01

    Pelvic floor disorders (PFDs) are common, with one in four U.S. women reporting moderate to severe symptoms of urinary incontinence, pelvic organ prolapse or fecal incontinence. Given the high societal burden of these disorders, identifying potentially modifiable risk factors is crucial. Physical activity is one such potentially modifiable risk factor; the large number of girls and women participating in sport and strenuous training regimens increases the need to understand associated risks and benefits of these exposures. The aim of this review is to summarize studies reporting the association between physical activity and PFDs. Most studies are cross-sectional and most include small numbers of participants. The primary findings of this review include: Urinary incontinence during exercise is common and is more prevalent in women during high-impact sports. Mild to moderate physical activity, such as brisk walking, decreases both the odds of having and the risk of developing urinary incontinence. In older women, mild to moderate activity also decreases the odds of having fecal incontinence; however, young women participating in high intensity activity are more likely to report anal incontinence than less active women. Scant data suggest that in middle-aged women, lifetime physical activity increases the odds of stress urinary incontinence slightly and does not increase the odds of pelvic organ prolapse. Women undergoing surgery for pelvic organ prolapse are more likely to report a history of heavy work than controls; however, women recruited from the community with pelvic organ prolapse on examination report similar lifetime levels of strenuous activity as women without this exam finding. Data are insufficient to determine whether strenuous activity while young predisposes to pelvic floor disorders later in life. The existing literature suggests that most physical activity does not harm the pelvic floor and does provide numerous health benefits for women. However

  17. Floors and Toilets: Association of Floors and Sanitation Practices with Fecal Contamination in Peruvian Amazon Peri-Urban Households.

    PubMed

    Exum, Natalie G; Olórtegui, Maribel Paredes; Yori, Pablo Peñataro; Davis, Meghan F; Heaney, Christopher D; Kosek, Margaret; Schwab, Kellogg J

    2016-07-19

    Over two billion people worldwide lack access to an improved sanitation facility that adequately retains or treats feces. This results in the potential for fecal material containing enteric pathogens to contaminate the environment, including household floors. This study aimed to assess how floor type and sanitation practices impacted the concentration of fecal contamination on household floors. We sampled 189 floor surfaces within 63 households in a peri-urban community in Iquitos, Peru. All samples were analyzed for colony forming units (CFUs) of E. coli, and households were evaluated for their water, sanitation, and hygiene characteristics. Results of multivariate linear regression indicated that households with improved sanitation and cement floors in the kitchen area had reduced fecal contamination to those with unimproved sanitation and dirt floors (Beta: -1.18 log10 E. coli CFU/900 cm(2); 95% confidence interval [CI]: -1.77, -0.60). Households that did not versus did share their sanitation facility also had less contaminated kitchen floors (Beta: -0.65 log10 E. coli CFU/900 cm(2); 95% CI: -1.15, -0.16). These findings suggest that the sanitation facilities of a home may impact the microbial load found on floors, contributing to the potential for household floors to serve as an indirect route of fecal pathogen transmission to children.

  18. Flatness floor system by caterpillar rail

    NASA Astrophysics Data System (ADS)

    Motoyama, Teizou; Motoyama, Tomomi

    2000-01-01

    The grooves on the floor to allow sliding of automatic doors in office buildings, hospitals, etc., can cause inconvenience or even accidents because the wheels of wheel chairs or high-heeled shoes can get stuck within the grooves. In addition, collection of rainwater and dust within the grooves impede the proper functioning of the automatic doors. As a counter measure to this problem, a caterpillar-like retractable groove cover was designed and made from stainless steel. Since the edges of the cover required high precision, high speed laser processing was applied in the making of its component parts. The caterpillar cover design, laser processing conditions, durability testing by repetition of door opening/closing etc. are explained in this paper. The covers developed through this study were installed in the automatic doors of a high rise building and have been found to be effective in overcoming the problems mentioned above.

  19. Floor tile and mastic removal project report

    SciTech Connect

    Not Available

    1992-11-01

    A test program was developed and coordinated with State and Federal Regulators and carried out at Fort Sill, Oklahoma. This program was carefully designed to create the worst conditions in order to evaluate whether asbestos fibers are released when asbestos containing floor tile and mastic are removed. There were over 1,000 samples taken and analyzed during the execution of the program. The conclusions reached were based upon analysis of the critical samples using the Transmission Electron Microscope (TEM) technology. Additionally, the TEM procedures were used to evaluate personnel samples to determine whether those fibers found were asbestos or other materials. Most of the (TEM) samples were analyzed by the US Environmental Protection Agency (EPA) Risk Reduction Engineering Laboratory in Cincinnati, Ohio.

  20. PFP Emergency Lighting Study

    SciTech Connect

    BUSCH, M.S.

    2000-02-02

    NFPA 101, section 5-9 mandates that, where required by building classification, all designated emergency egress routes be provided with adequate emergency lighting in the event of a normal lighting outage. Emergency lighting is to be arranged so that egress routes are illuminated to an average of 1.0 footcandle with a minimum at any point of 0.1 footcandle, as measured at floor level. These levels are permitted to drop to 60% of their original value over the required 90 minute emergency lighting duration after a power outage. The Plutonium Finishing Plant (PFP) has two designations for battery powered egress lights ''Emergency Lights'' are those battery powered lights required by NFPA 101 to provide lighting along officially designated egress routes in those buildings meeting the correct occupancy requirements. Emergency Lights are maintained on a monthly basis by procedure ZSR-12N-001. ''Backup Lights'' are battery powered lights not required by NFPA, but installed in areas where additional light may be needed. The Backup Light locations were identified by PFP Safety and Engineering based on several factors. (1) General occupancy and type of work in the area. Areas occupied briefly during a shiftly surveillance do not require backup lighting while a room occupied fairly frequently or for significant lengths of time will need one or two Backup lights to provide general illumination of the egress points. (2) Complexity of the egress routes. Office spaces with a standard hallway/room configuration will not require Backup Lights while a large room with several subdivisions or irregularly placed rooms, doors, and equipment will require Backup Lights to make egress safer. (3) Reasonable balance between the safety benefits of additional lighting and the man-hours/exposure required for periodic light maintenance. In some plant areas such as building 236-Z, the additional maintenance time and risk of contamination do not warrant having Backup Lights installed in all rooms

  1. 76 FR 26685 - Multilayered Wood Flooring From the People's Republic of China: Alignment of Final Countervailing...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-05-09

    ... International Trade Administration Multilayered Wood Flooring From the People's Republic of China: Alignment of... multilayered wood flooring (``wood flooring'') from the People's Republic of China (``PRC'') with the final... wood flooring from the PRC. See Multilayered Wood Flooring from the People's Republic of...

  2. STEEL BEAMS FOR FIRST FLOOR BEING READIED FOR CONCRETE POUR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    STEEL BEAMS FOR FIRST FLOOR BEING READIED FOR CONCRETE POUR UNDER WEATHER SHELTER DURING COLD WINTER. NOTE ABUNDANCE OF BEAMS; THE FLOOR WILL SUPPORT HEAVY LOADS. INL NEGATIVE NO. 1175. Unknown Photographer, 12/20/1950 - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

  3. 4. AERIAL VIEW, LOOKING SOUTHSOUTHWEST, OF BUILDING 371 GROUND FLOOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    4. AERIAL VIEW, LOOKING SOUTH-SOUTHWEST, OF BUILDING 371 GROUND FLOOR UNDER CONSTRUCTION. THE GROUND FLOOR, WHICH CONTAINS THE MAJORITY OF THE PLUTONIUM RECOVERY PROCESSING EQUIPMENT, IS DIVIDED INTO COMPARTMENTS BY FIREWALLS, AIRLOCKS, AND USE OF NEGATIVE AIR PRESSURE. (1/7/75) - Rocky Flats Plant, Plutonium Recovery Facility, Northwest portion of Rocky Flats Plant, Golden, Jefferson County, CO

  4. INTERIOR VIEW OF THE SECOND FLOOR HALL. SHOWING THE IRON ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    INTERIOR VIEW OF THE SECOND FLOOR HALL. SHOWING THE IRON RAIL, TONGUE-AND-GROOVE WOOD FLOOR, AND THE SLIDING WINDOW TO BEDROOM 3. VIEW FACING SOUTHEAST. - Hickam Field, Officers' Housing Type N, 204B Second Street, Honolulu, Honolulu County, HI

  5. 76 FR 76435 - Multilayered Wood Flooring From China

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-12-07

    ... COMMISSION Multilayered Wood Flooring From China Determinations On the basis of the record \\1\\ developed in... China of multilayered wood flooring, provided for in subheadings 4409.10, 4409.29, 4412.31, 4412.32... orders on imports of this product from China. Background The Commission instituted these...

  6. 75 FR 79019 - Multilayered Wood Flooring From China

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-12-17

    ... COMMISSION Multilayered Wood Flooring From China Determinations On the basis of the record \\1\\ developed in... reason of imports from China of multilayered wood flooring, provided for in subheadings 4409.10, 4409.29... than fair value (LTFV) and subsidized by the Government of China. \\1\\ The record is defined in Sec....

  7. 50. INTERIOR VIEW TO SOUTH AT FIRST FLOOR MACHINE SHOP: ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    50. INTERIOR VIEW TO SOUTH AT FIRST FLOOR MACHINE SHOP: Interior view towards south of the machine shop located on the first floor of the powerhouse and car barn. Compare this view with CA-12-74, taken seventeen years earlier. - San Francisco Cable Railway, Washington & Mason Streets, San Francisco, San Francisco County, CA

  8. 12. INTERIOR OF COVERED WALKWAY BEHIND SECOND FLOOR APARTMENTS FROM ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    12. INTERIOR OF COVERED WALKWAY BEHIND SECOND FLOOR APARTMENTS FROM OPPOSITE VIEW OF CA-XXX-11. DOOR AT PHOTO LEFT OPENS INTO THE KITCHEN OF THE WEST SIDE SECOND FLOOR APARTMENT. VIEW TO EAST. - Lee Vining Creek Hydroelectric System, Triplex Cottage, Lee Vining Creek, Lee Vining, Mono County, CA

  9. 27 CFR 46.233 - Payment of floor stocks tax.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... PRODUCTS AND CIGARETTE PAPERS AND TUBES Floor Stocks Tax on Certain Tobacco Products, Cigarette Papers, and Cigarette Tubes Held for Sale on April 1, 2009 Filing Requirements § 46.233 Payment of floor stocks tax. (a) Electronic funds transfer. If the dealer pays any other excise taxes collected by TTB by electronic...

  10. 9. SANDSORTING BUILDING, SIXTH (TOP) FLOOR, VIEW OF ELECTRIC MOTOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    9. SAND-SORTING BUILDING, SIXTH (TOP) FLOOR, VIEW OF ELECTRIC MOTOR THAT POWERS ELEVATOR No. (ELEVATOR No. 2 EXTENDS FROM THE THIRD TO THE SIXTH FLOOR) AND WOODEN CHUTE, LOOKING NORTHWEST - Mill "C" Complex, Sand-Sorting Building, South of Dee Bennet Road, near Illinois River, Ottawa, La Salle County, IL

  11. 10. SANDSORTING BUILDING, FIFTH FLOOR, VIEW OF STAIRWAY LEADING TO ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    10. SAND-SORTING BUILDING, FIFTH FLOOR, VIEW OF STAIRWAY LEADING TO SIXTH FLOOR, ELEVATOR No. 2, AND WOODEN STAIRWAY (LEFT) LEADING TO PLATFORM FOR ACCESS TO WOODEN CHUTES (WOODEN CHUTES CAN BE SEEN PARALLELLING STAIRWAY), LOOKING SOUTHEAST - Mill "C" Complex, Sand-Sorting Building, South of Dee Bennet Road, near Illinois River, Ottawa, La Salle County, IL

  12. 13. Missile site control building, third and fourth floor interior, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    13. Missile site control building, third and fourth floor interior, showing east corner and former electrical equipment area, room #306. This building was salvaged and sealed in the 1970's; the lower floors also suffered flooding - Stanley R. Mickelsen Safeguard Complex, Missile Site Control Building, Northeast of Tactical Road; southeast of Tactical Road South, Nekoma, Cavalier County, ND

  13. 5. VIEW OF INTERIOR OF BUILDING 220, DECORATIVE FLOOR AT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. VIEW OF INTERIOR OF BUILDING 220, DECORATIVE FLOOR AT ENTRANCE. VINYL TILE INLAID FLOOR WITH A RED BACKGROUND, GREEN EMBLEM, BROWN AND WHITE EAGLE, RED AND WHITE SHIELD, BLACK ANCHOR, RED ARROWS AND LETTERING. - U.S. Naval Base, Pearl Harbor, Brig, Neville Way near Ninth Street at Marine Barracks, Pearl City, Honolulu County, HI

  14. 49 CFR 38.117 - Floors, steps and thresholds.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 1 2011-10-01 2011-10-01 false Floors, steps and thresholds. 38.117 Section 38.117 Transportation Office of the Secretary of Transportation AMERICANS WITH DISABILITIES ACT (ADA) ACCESSIBILITY SPECIFICATIONS FOR TRANSPORTATION VEHICLES Intercity Rail Cars and Systems § 38.117 Floors,...

  15. 49 CFR 38.117 - Floors, steps and thresholds.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 1 2012-10-01 2012-10-01 false Floors, steps and thresholds. 38.117 Section 38.117 Transportation Office of the Secretary of Transportation AMERICANS WITH DISABILITIES ACT (ADA) ACCESSIBILITY SPECIFICATIONS FOR TRANSPORTATION VEHICLES Intercity Rail Cars and Systems § 38.117 Floors,...

  16. 6. Photographic copy of floor plan drawing, dated August 10, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    6. Photographic copy of floor plan drawing, dated August 10, 1968, Selfridge ANG Base, in possession of Selfridge Base Museum, Mt. Clemens, Michigan. FLOOR PLANS BLDGS. 1582 & 1584. - Selfridge Field, Building Nos. 1582, 1583, 1584, South of East Joy Boulevard, west of Taxiway C, Mount Clemens, Macomb County, MI

  17. 7. Photographic copy of floor plan drawing, dated September 26, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    7. Photographic copy of floor plan drawing, dated September 26, 1975, Selfridge ANG Base, in possession of Selfridge Base Museum, Mt. Clemens, Michigan. FLOOR PLAN BLDG. 1583. - Selfridge Field, Building Nos. 1582, 1583, 1584, South of East Joy Boulevard, west of Taxiway C, Mount Clemens, Macomb County, MI

  18. 16. INTERIOR DETAIL, SECOND FLOOR OF ADDITION AT SOUTH WALL ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    16. INTERIOR DETAIL, SECOND FLOOR OF ADDITION AT SOUTH WALL OF TOILET ROOM, SHOWING LARGER, DIFFERENT STYLE RADIATOR THAN AT FIRST FLOOR, AND TONGUE AND GROOVE WAINSCOTING WITH WOOD CAP TRIM. - Mills Hall, Mills College, 5000 MacArthur Boulevard, Oakland, Alameda County, CA

  19. Rubber Flooring Impact on Production and Herdlife of Dairy Cows

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Use of rubber flooring in dairies has become popular because of perceived cow comfort. The overall objective of this longitudinal study was to evaluate production, reproduction, and retention of first and second lactations of cows assigned to either rubber (RUB) or concrete (CON) flooring at the fe...

  20. Pelvic floor muscle training in males: practical applications.

    PubMed

    Siegel, Andrew L

    2014-07-01

    The pelvic floor muscles are vital to male genitourinary health. Pelvic floor muscle training may prove helpful in a variety of clinical circumstances: stress urinary incontinence that follows prostate surgery, overactive bladder, postvoid dribbling, erectile dysfunction, ejaculation issues including premature ejaculation, and pelvic pain due to levator muscle spasm.

  1. 27 CFR 46.221 - Floor stocks tax rates.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... CIGARETTE PAPERS AND TUBES Floor Stocks Tax on Certain Tobacco Products, Cigarette Papers, and Cigarette... Floor stocks tax rate Small cigars $48.502 per thousand. Small cigarettes 30.83 per thousand. Large cigarettes 6½ inch or less in length 64.74 per thousand. Large cigarettes more than 6½ inch in length...

  2. Photographic copy of floor plan drawing, dated March 7, 1968, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Photographic copy of floor plan drawing, dated March 7, 1968, Department of the Air Force Air Defense Command Installations, in possession of Selfridge Base Museum, Mt. Clemens, Michigan. FLOOR PLAN BLDG. 1575 - Selfridge Field, Building No. 1575, South of East Joy Boulevard, west of Taxiway C, Mount Clemens, Macomb County, MI

  3. 1. VIEW SOUTHEAST OF BUILDING 24 ON ORGAN STREET; FLOORS ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. VIEW SOUTHEAST OF BUILDING 24 ON ORGAN STREET; FLOORS 1 AND 2 HOUSED PACKING AND SHIPPING DEPARTMENTS; FLOORS 3 AND 4 WERE PLASTIC COMPOUNDING AND INJECTION MOLDING DEPARTMENTS - Bryant Electric Company, Building No. 24, 80 Organ Street, Bridgeport, Fairfield County, CT

  4. 32. LARGE LADLE, BOX FLOOR, GREY IRON FOUNDRY IS USED ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    32. LARGE LADLE, BOX FLOOR, GREY IRON FOUNDRY IS USED TO CARRY LARGE BATCHES OF IRON FROM THE CUPOLA AREAS TO THE LARGE MOLDS MADE ON BOX FLOOR AREA. - Stockham Pipe & Fittings Company, Grey Iron Foundry, 4000 Tenth Avenue North, Birmingham, Jefferson County, AL

  5. 11. INTERIOR VIEW OF THIRD FLOOR OF ORIGINAL FACTORY, LOOKING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    11. INTERIOR VIEW OF THIRD FLOOR OF ORIGINAL FACTORY, LOOKING NORTHWEST. THIS SECTION OF THE FACTORY WAS USED FOR STORAGE; THE STAIRWAY LEADS DOWN TO THE SECOND FLOOR WHICH WAS THE LOCATION OF THE COMPANY OFFICE AND EMPLOYEE CHANGE ROOM. - Illinois Pure Aluminum Company, 109 Holmes Street, Lemont, Cook County, IL

  6. MTR BUILDING AND BALCONY FLOORS. CAMERA FACING EASTERLY. PHOTOGRAPHER DID ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    MTR BUILDING AND BALCONY FLOORS. CAMERA FACING EASTERLY. PHOTOGRAPHER DID NOT EXPLAIN DARK CLOUD. MTR WING WILL ATTACH TO GROUND FLOOR. INL NEGATIVE NO. 1567. Unknown Photographer, 2/28/1951 - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

  7. Short communication: Flooring preferences of dairy cows at calving.

    PubMed

    Campler, M; Munksgaard, L; Jensen, M B; Weary, D M; von Keyserlingk, M A G

    2014-02-01

    The present study investigated the flooring preference during the 30 h before parturition in Holstein dairy cows housed individually in a maternity pen. Seventeen multiparous cows were moved, on average, 2 d before expected calving date into an individual maternity pen with 3 different flooring surfaces: 10 cm of sand, pebble-top rubber mats, or concrete flooring, each covered with 15 cm of straw. Calving location, lying time, and total time and number of lying bouts on each of the floor types were recorded during 2 periods: precalving (24 to 29 h before calving) and at calving (0 to 5h before calving). Ten cows calved on sand, 6 on concrete, and 1 on the rubber mat. Lying bouts increased during the hours closest to calving, regardless of flooring. The number of lying bouts did not differ between flooring types precalving but cows had more lying bouts on sand and concrete compared with rubber at calving. Cows spent more time lying down on sand and concrete compared with rubber precalving, but lying times did not differ between treatments at calving. Cows that calved on sand spent more time lying on sand at calving compared with the other 2 flooring types. Cows that calved on concrete did not show a flooring preference at calving. These results indicate that rubber mats are the least preferred by dairy cows in the maternity pens, even when covered with a deep layer of straw.

  8. INTERIOR VIEW OF BATHROOM 1, SECOND FLOOR. NOTE THE ORIGINAL ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    INTERIOR VIEW OF BATHROOM 1, SECOND FLOOR. NOTE THE ORIGINAL MOSAIC PATTERN FLOOR TILE, TILE WAINSCOT, CERAMIC ACCESSORIES, AND SINGLE-PANEL DOOR TO LINEN CLOSET. VIEW FACING NORTHEAST. - Hickam Field, Officers' Housing Type K, 304 Sixth Street, Honolulu, Honolulu County, HI

  9. 22. TRANSPORTING STEEL FLOOR PLATES ON HAND CART TO NORTH ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    22. TRANSPORTING STEEL FLOOR PLATES ON HAND CART TO NORTH END OF BRIDGE. NOTE RETAINING ANGLE FOR SURFACING AT CUT-SIDE EDGE OF FLOOR PLATES. NOTE TUNNELS IN TOP OF ROCK FACE FOR MAIN CABLES - Kaibab Trail Suspension Bridge, Spanning Colorado River, Grand Canyon, Coconino County, AZ

  10. 10. INTERIOR VIEW OF DECONTAMINATION ROOM ON MAIN FLOOR. CAMERA ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    10. INTERIOR VIEW OF DECONTAMINATION ROOM ON MAIN FLOOR. CAMERA FACING SOUTH. NOTE DRAIN PAN ON FLOOR. THIS WAS THE ONLY PROCESS-RELATED ROOM ACCESSIBLE TO PHOTOGRAPHER. INEEL PROOF SHEET NOT NUMBERED. - Idaho National Engineering Laboratory, Old Waste Calcining Facility, Scoville, Butte County, ID

  11. 29. FLOOR PLAN OF WASTE CALCINATION FACILITY SHOWING MAIN ABOVEGRADE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    29. FLOOR PLAN OF WASTE CALCINATION FACILITY SHOWING MAIN ABOVE-GRADE FLOOR LEVEL. INEEL DRAWING NUMBER 200-0633-00-287-106354. FLUOR NUMBER 5775-CPP-633-A-4. - Idaho National Engineering Laboratory, Old Waste Calcining Facility, Scoville, Butte County, ID

  12. "How-To" Guide to Pelvic Floor Muscle Dysfunction.

    PubMed

    Albrecht, Katie B

    2015-09-01

    The purpose of this paper is to assist the clinician in recognizing pelvic floor muscle dysfunction in women with vulvar symptoms, to provide general treatment algorithms, and to facilitate understanding of the scientific rationale behind appropriate treatment. In short, this paper is meant to provide a "how-to" guide to pelvic floor pain management for the Ob/Gyn.

  13. Interior view, ground floor passage crossing the main corridor at ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Interior view, ground floor passage crossing the main corridor at its center, looking east through the doorway linking the two perpendicular axes. The door at the end of the passage opens onto a passage running under the entrance portico bearing ground floor exterior doors at each end. - U. S. Naval Asylum, Biddle Hall, Gray's Ferry Avenue, Philadelphia, Philadelphia County, PA

  14. 24. Interior view of third floor attic of 1896 south ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    24. Interior view of third floor attic of 1896 south section of building. Note steel truss supports and wooden roof. Top floor round window in seen from outside in photo WA-116-A-2. - Puget Sound Naval Shipyard, Pattern Shop, Farragut Avenue, Bremerton, Kitsap County, WA

  15. 46. INTERIOR VIEW TO SOUTH ON SECOND FLOOR: Interior view ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    46. INTERIOR VIEW TO SOUTH ON SECOND FLOOR: Interior view looking south along the east wall on the second floor of the powerhouse and car barn. Note the cable car truck in the foreground. - San Francisco Cable Railway, Washington & Mason Streets, San Francisco, San Francisco County, CA

  16. 45. INTERIOR VIEW TO SOUTHWEST ON SECOND FLOOR: Interior view ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    45. INTERIOR VIEW TO SOUTHWEST ON SECOND FLOOR: Interior view towards southwest on second floor of main portion of the powerhouse and car barn. This space is used for repair and storage of cable cars. Note wooden trussed roof. - San Francisco Cable Railway, Washington & Mason Streets, San Francisco, San Francisco County, CA

  17. 44. SECOND FLOOR 'ANNEX' INTERIOR VIEW TO SOUTHWEST: Interior ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    44. SECOND FLOOR 'ANNEX' - INTERIOR VIEW TO SOUTHWEST: Interior view towards southwest on second floor of the powerhouse 'annex.' Note the steel column and beam construction and the old shunt car formerly used to move cable cars around the yard. - San Francisco Cable Railway, Washington & Mason Streets, San Francisco, San Francisco County, CA

  18. 29 CFR 1926.855 - Manual removal of floors.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 8 2010-07-01 2010-07-01 false Manual removal of floors. 1926.855 Section 1926.855 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Demolition § 1926.855 Manual removal of floors....

  19. 27 CFR 46.221 - Floor stocks tax rates.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... CIGARETTE PAPERS AND TUBES Floor Stocks Tax on Certain Tobacco Products, Cigarette Papers, and Cigarette... Floor stocks tax rate Small cigars $48.502 per thousand. Small cigarettes 30.83 per thousand. Large cigarettes 6½ inch or less in length 64.74 per thousand. Large cigarettes more than 6½ inch in length...

  20. 27 CFR 46.221 - Floor stocks tax rates.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... CIGARETTE PAPERS AND TUBES Floor Stocks Tax on Certain Tobacco Products, Cigarette Papers, and Cigarette... Floor stocks tax rate Small cigars $48.502 per thousand. Small cigarettes 30.83 per thousand. Large cigarettes 6½ inch or less in length 64.74 per thousand. Large cigarettes more than 6½ inch in length...

  1. 8. EXTERIOR OF ENCLOSED PORTION OF SECOND FLOOR WEST SIDE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    8. EXTERIOR OF ENCLOSED PORTION OF SECOND FLOOR WEST SIDE APARTMENT ENTRANCE. SIDE HUNG CASEMENT WINDOWS AT PHOTO LEFT OPEN TO FIRST FLOOR APARTMENT KITCHEN AND PANTRY. VIEW TO SOUTHWEST. - Lee Vining Creek Hydroelectric System, Triplex Cottage, Lee Vining Creek, Lee Vining, Mono County, CA

  2. 11. INTERIOR OF COVERED WALKWAY BEHIND SECOND FLOOR APARTMENTS. THE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    11. INTERIOR OF COVERED WALKWAY BEHIND SECOND FLOOR APARTMENTS. THE LEFT SIDE OF WALKWAY IS A CONCRETE RETAINING WALL. THE RIGHT SIDE IS PIERCED BY WINDOWS TO SECOND FLOOR KITCHENS, BATHROOMS, AND PANTRIES. VIEW TO WEST. - Lee Vining Creek Hydroelectric System, Triplex Cottage, Lee Vining Creek, Lee Vining, Mono County, CA

  3. INTERIOR VIEW ON SEVENTH FLOOR ALONG EAST (CLAY STREET) FRONT. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    INTERIOR VIEW ON SEVENTH FLOOR ALONG EAST (CLAY STREET) FRONT. TYPICAL INTERIOR CONDITIONS OF PARTIAL DEMOLITION; SUSPENDED CEILING AND MOVABLE PARTITION WALLS REMOVED, REMAINS OF DEMOLISHED SHEET METAL CORNICE FROM BUILDING EXTERIOR VISIBLE ON FLOOR - John Breuner & Company Building, 1515 Clay Street, Oakland, Alameda County, CA

  4. 44. MAIN MEETING ROOM, SOUTH SIDE GALLERY. Under the flooring ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    44. MAIN MEETING ROOM, SOUTH SIDE GALLERY. Under the flooring were sleepers used to elevate the 1812 raised floor sections. These sleepers were fashioned from the 1755 Greater Meeting House salvaged gallery railing. Note the initials and date: 'EB 1788'. Other graffiti has dates as early as the 1760s. - Twelfth Street Meeting House, 20 South Twelfth Street, Philadelphia, Philadelphia County, PA

  5. Interior view of loading dock, main floor, looking east. View ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Interior view of loading dock, main floor, looking east. View shows roof truss system, elevated dock floor, and metal roll-up doors with metal casement windows above them - Southern Pacific Railroad Depot, Railroad Terminal Post Office & Express Building, Fifth & I Streets, Sacramento, Sacramento County, CA

  6. Female Pelvic Floor Anatomy: The Pelvic Floor, Supporting Structures, and Pelvic Organs

    PubMed Central

    Herschorn, Sender

    2004-01-01

    The development of novel, less invasive therapies for stress urinary incontinence in women requires a thorough knowledge of the relationship between the pathophysiology of incontinence and anatomy. This article provides a review of the anatomy of the pelvic floor and lower urinary tract. Also discussed is the hammock hypothesis, which describes urethral support within the pelvis and provides an explanation of the continence mechanism. PMID:16985905

  7. Development of the 2nd generation z(Redshift) and early universe spectrometer & the study of far-IR fine structure emission in high-z galaxies

    NASA Astrophysics Data System (ADS)

    Ferkinhoff, Carl

    The 2nd generation z (Redshift) and Early Universe Spectrometer (ZEUS-2), is a long-slit echelle-grating spectrometer (R~1000) for observations at submillimeter wavelengths from 200 to 850 microm. Its design is optimized for the detection of redshifted far-infrared spectral lines from galaxies in the early universe. Combining exquisite sensitivity, broad wavelength coverage, and large (˜2.5%) instantaneous bandwidth, ZEUS-2 is uniquely suited for studying galaxies between z˜0.2 and 5---spanning the peaks in both the star formation rate and number of AGN in the universe. ZEUS-2 saw first light at the Caltech Submillimeter Observatory (CSO) in the Spring of 2012 and was commissioned on the Atacama Pathfinder Experiment (APEX) in November 2012. Here we detail the design and performance of ZEUS-2, first however we discuss important science results that are examples of the science enabled by ZEUS-2. Using the first generation z (Redshift) and Early Universe Spectrometer (ZEUS-1) we made the first high-z detections of the [NII] 122 microm and [OIII] 88 microm lines. We detect these lines from starburst galaxies between z ˜2.5 and 4 demonstrating the utility of these lines for characterizing the properties of early galaxies. Specifically we are able to determine the most massive star still on the main sequence, the number of those stars and a lower limit on the mass of ionized gas in the source. Next we present ZEUS-2's first science result. Using ZEUS-2 on APEX we have detected the [CII] 158 microm line from the z = 1.78 galaxy H-ATLAS J091043.1-000322 with a line flux of (6.44 +/- 0.42) ˜ 10-18 W m-2. Combined with its far-infrared luminosity and a new Herschel-PACS detection of the [OI] 63 microm line we are able to conclude that H-ATLAS J091043.1-000322 is a high redshift analogue of a local ultra-luminous infrared galaxy, i.e. it is likely the site of a compact starburst due to a major merger. This detection, combined with the ZEUS-1 observations of the [NII

  8. Recognition and Management of Nonrelaxing Pelvic Floor Dysfunction

    PubMed Central

    Faubion, Stephanie S.; Shuster, Lynne T.; Bharucha, Adil E.

    2012-01-01

    Nonrelaxing pelvic floor dysfunction is not widely recognized. Unlike in pelvic floor disorders caused by relaxed muscles (eg, pelvic organ prolapse or urinary incontinence, both of which often are identified readily), women affected by nonrelaxing pelvic floor dysfunction may present with a broad range of nonspecific symptoms. These may include pain and problems with defecation, urination, and sexual function, which require relaxation and coordination of pelvic floor muscles and urinary and anal sphincters. These symptoms may adversely affect quality of life. Focus on the global symptom complex, rather than the individual symptoms, may help the clinician identify the condition. The primary care provider is in a position to intervene early, efficiently, and effectively by (1) recognizing the range of symptoms that might suggest nonrelaxing pelvic floor dysfunction, (2) educating patients, (3) performing selective tests when needed to confirm the diagnosis, and (4) providing early referral for physical therapy. PMID:22305030

  9. Effect of pelvic floor muscle exercises on pulmonary function

    PubMed Central

    Han, DongWook; Ha, Misook

    2015-01-01

    [Purpose] This study aimed to determine the correlation between pelvic floor muscle strength and pulmonary function. In particular, we examined whether pelvic floor muscle exercises can improve pulmonary function. [Subjects] Thirty female college students aged 19–21 with no history of nervous or musculoskeletal system injury were randomly divided into experimental and control groups. [Methods] For the pulmonary function test, spirometry items included forced vital capacity and maximal voluntary ventilation. Pelvic floor muscle exercises consisted of Kegel exercises performed three times daily for 4 weeks. [Results] Kegel exercises performed in the experimental group significantly improved forced vital capacity, forced expiratory volume in 1 second, PER, FEF 25–75%, IC, and maximum voluntary ventilation compared to no improvement in the control group. [Conclusion] Kegel exercises significantly improved pulmonary function. When abdominal pressure increased, pelvic floor muscles performed contraction at the same time. Therefore, we recommend that the use of pelvic floor muscle exercises be considered for improving pulmonary function. PMID:26644681

  10. Second-order adjoint sensitivity analysis methodology (2nd-ASAM) for computing exactly and efficiently first- and second-order sensitivities in large-scale linear systems: II. Illustrative application to a paradigm particle diffusion problem

    NASA Astrophysics Data System (ADS)

    Cacuci, Dan G.

    2015-03-01

    This work presents an illustrative application of the second-order adjoint sensitivity analysis methodology (2nd-ASAM) to a paradigm neutron diffusion problem, which is sufficiently simple to admit an exact solution, thereby making transparent the underlying mathematical derivations. The general theory underlying 2nd-ASAM indicates that, for a physical system comprising Nα parameters, the computation of all of the first- and second-order response sensitivities requires (per response) at most (2Nα + 1) "large-scale" computations using the first-level and, respectively, second-level adjoint sensitivity systems (1st-LASS and 2nd-LASS). Very importantly, however, the illustrative application presented in this work shows that the actual number of adjoint computations needed for computing all of the first- and second-order response sensitivities may be significantly less than (2Nα + 1) per response. For this illustrative problem, four "large-scale" adjoint computations sufficed for the complete and exact computations of all 4 first- and 10 distinct second-order derivatives. Furthermore, the construction and solution of the 2nd-LASS requires very little additional effort beyond the construction of the adjoint sensitivity system needed for computing the first-order sensitivities. Very significantly, only the sources on the right-sides of the diffusion (differential) operator needed to be modified; the left-side of the differential equations (and hence the "solver" in large-scale practical applications) remained unchanged. All of the first-order relative response sensitivities to the model parameters have significantly large values, of order unity. Also importantly, most of the second-order relative sensitivities are just as large, and some even up to twice as large as the first-order sensitivities. In the illustrative example presented in this work, the second-order sensitivities contribute little to the response variances and covariances. However, they have the

  11. Symptomatic Floor-of-Mouth Swelling with Neck Extension in a 14-Year-Old Girl

    PubMed Central

    Dayton, Kristin; Ryan, Matthew F.

    2014-01-01

    A plunging ranula is a soft-tissue mass stemming from a mucous extravasation cyst of the sublingual gland which can herniate through the mylohyoid muscle. We describe a case in which a 14-year-old girl presented with a rapidly expanding mass on the floor of her mouth affecting her ability to swallow and speak and causing tracheal compression. The patient was initially managed conservatively with antibiotics and steroids; however, the mass continued to expand necessitating emergent bedside incision and drainage and subsequent surgical intervention. The pathophysiology and management options for ranulas are also discussed herein. PMID:25548707

  12. a Schema for Extraction of Indoor Pedestrian Navigation Grid Network from Floor Plans

    NASA Astrophysics Data System (ADS)

    Niu, Lei; Song, Yiquan

    2016-06-01

    The requirement of the indoor navigation related tasks such emergency evacuation calls for efficient solutions for handling data sources. Therefore, the navigation grid extraction from existing floor plans draws attentions. To this, we have to thoroughly analyse the source data, such as Autocad dxf files. Then, we could establish a sounding navigation solution, which firstly complements the basic navigation rectangle boundaries, secondly subdivides these rectangles and finally generates accessible networks with these refined rectangles. Test files are introduced to validate the whole workflow and evaluate the solution performance. In conclusion, we have achieved the preliminary step of forming up accessible network from the navigation grids.

  13. 76 FR 64313 - Multilayered Wood Flooring From the People's Republic of China: Final Affirmative Countervailing...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-10-18

    ... International Trade Administration Multilayered Wood Flooring From the People's Republic of China: Final... countervailable subsidies are being provided to producers and exporters of multilayered wood flooring (``wood... since our Preliminary Determination. See Multilayered Wood Flooring From the People's Republic of...

  14. 76 FR 92 - Multilayered Wood Flooring From the People's Republic of China: Postponement of Preliminary...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-01-03

    ... International Trade Administration Multilayered Wood Flooring From the People's Republic of China: Postponement..., 2010, the Department of Commerce (``the Department'') initiated an investigation of multilayered wood flooring from the People's Republic of China (``PRC''). See Multilayered Wood Flooring From the...

  15. A strong pelvic floor is associated with higher rates of sexual activity in women with pelvic floor disorders

    PubMed Central

    Kanter, Gregg; Rogers, Rebecca G; Pauls, Rachel N; Kammerer-Doak, Dorothy; Thakar, Ranee

    2015-01-01

    Introduction and Hypothesis We evaluated the associations between pelvic floor muscle strength and tone with sexual activity and sexual function in women with pelvic floor disorders. Methods This was a secondary analysis of a multicenter study of women with pelvic floor disorders from the US and UK performed to validate the Pelvic Organ Prolapse/Incontinence Sexual Questionnaire, IUGA-Revised (PISQ-IR). Participants were surveyed about whether they were sexually active and completed the PISQ-IR and Female Sexual Function Index (FSFI) questionnaires to assess sexual function. Physical exams included assessment of pelvic floor strength by the Oxford Grading Scale, and assessment of pelvic floor tone per ICS guidelines. Results The cohort of 585 women was middle aged (mean age 54.9 +/−12.1) with 395 (67.5%) reporting sexual activity. Women with a strong pelvic floor (n=275) were more likely to report sexual activity than women with weak strength (n=280) (75.3 vs. 61.8%, p<0.001), but normal or hypoactive pelvic floor tone was not associated with sexual activity (68.8 vs. 60.2%, normal vs. hypoactive, p=0.08). After multivariable analysis, a strong pelvic floor remained predictive of sexual activity (OR 1.89, CI 1.18–3.03, p<0.01). Among sexually active women (n=370), a strong pelvic floor was associated with higher scores on the PISQ-IR domain of condition impact (Parameter Estimate 0.20+/−0.09, P=0.04), and FSFI orgasm domain (PE 0.51+/−0.17, P=0.004). Conclusion A strong pelvic floor is associated with higher rates of sexual activity as well as higher sexual function scores on the condition impact domain of the PISQ-IR and orgasm domain of the FSFI. PMID:25994625

  16. Redesign and treatment planning orbital floor reconstruction using computer analysis anatomical landmarks.

    PubMed

    Ozer, Mehmet Asim; Govsa, Figen; Kazak, Zuhal; Erdogmus, Senem; Celik, Servet

    2016-08-01

    Orbital floor fractures are one of the most commonly encountered maxillofacial fractures due to their weak anatomical structure. Restoration of the orbital floor following a traumatic injury or a tumor surgery is often difficult due to inadequate visibility and lack of knowledge on its anatomical details. The aim of this study is to investigate the locations of the inferior orbital fissure (IOF), infraorbital groove (G), and infraorbital foramen (Fo) and their relationship with the orbital floor using a software. Measurements from the inferior orbital rim (IOR) using the Fo, the IOF, G, and the optic canal (OC) were calculated in 268 orbits as reference points. The surgical landmarks from the G and the OC, the G and the IOF, the G and the intersection point were measured as 31.6 ± 6, 12.9 ± 4, and 12 ± 5 mm, respectively. The mean distances between the G and the IOR, the Fo and the IOF, and the Fo and the OC were found as 8.3 ± 2.1, 28.7 ± 3.5, and 53.6 ± 5.9 mm, respectively. The mean angles were calculated as OC-IOF-G 68.1° ± 16.4°; intersection-G-IOF as 61.4° ± 15.8°; IOF-OC-G as 19° ± 5.5°; OC-G-intersection as 31.5° ± 11.9°, G-intersection-OC as 129.5°, IOF-intersection-G as 50.5°. Furthermore, variable bony changes on the orbital floor which may lead to the differences at intersection point of the G and Fo were determined. In 28 specimens (20.9 %), unilateral accessory Fo (AcFo) was present. In 27 specimens, AcFo was situated supermaedially (96.4 %) on the main aperture. In one specimen, two intraorbital canals and Fo emerged from different points and coursed into different apertures. The measured mean distances of the AcFo-IOR and the AcFo-Fo were as 7 ± 2 and 7.3 ± 3.2 mm, respectively. The primary principle in the oculoplastic treatment of orbital floor reconstructions must be repositioning the herniated orbital aperture by maintaining the infraorbital artery and the nerve in the orbital floor. The IOF and

  17. A field assessment of floor slipperiness in a student cafeteria.

    PubMed

    Yu, Ruifeng; Li, Kai Way

    2013-01-01

    Investigation of floor slipperiness is critical in studying the risk of slips and falls. This research conducted friction measurements and employee survey on floor slipperiness in a student cafeteria in a university in China in order to study the correlation between the two types of floor slipperiness measure. It was found that the fryer area in kitchen 1 and the meat defrost sink in kitchen 2 had significantly the lowest coefficient of friction (COF) values among all areas in the same kitchen. The results showed that the levels of friction on the floors in different areas in each kitchen were significantly different. Employee perceptions of floor slipperiness among areas were also significantly different. The level of friction and employee perception of floor slipperiness was highly correlated (ρ = 0.87). This implies a good agreement between the two measures. A linear regression model was established to describe the relationship between the perceived floor slipperiness and the measured COF. The model was significant at p < 0.0001 with an R (2) of 0.59.

  18. Knowledge of the pelvic floor in nulliparous women

    PubMed Central

    Neels, Hedwig; Wyndaele, Jean-Jacques; Tjalma, Wiebren A. A.; De Wachter, Stefan; Wyndaele, Michel; Vermandel, Alexandra

    2016-01-01

    [Purpose] Proper pelvic floor function is important to avoid serious dysfunctions including incontinence, prolapse, and sexual problems. The current study evaluated the knowledge of young nulliparous women about their pelvic floor and identified what additional information they wanted. [Subjects and Methods] In this cross-sectional survey, a validated, 36 item questionnaire was distributed to 212 nulliparous women. The questionnaire addressed demography, pelvic floor muscles, pelvic floor dysfunction, and possible information sources. Descriptive statistics were generated for all variables. Stability and validity testing were performed using Kappa statistics and intra class correlation coefficients to define agreement for each question. The study was approved by the ethics Committee (B300201318334). [Results] Using a VAS scale (0 to 10), the women rated their knowledge about the pelvic floor as a mean of 2.4 (SD 2.01). A total of 93% of the women were insufficiently informed and requested more information; 25% had concerns about developing urinary incontinence, and 14% about fecal incontinence. Many of the women were unaware what pelvic floor training meant. [Conclusion] There was a significant lack of knowledge about pelvic floor function among nulliparous women. The majority of nulliparous women expressed a need for education, which might offer a way to reduce dysfunction. PMID:27313364

  19. Knowledge of the pelvic floor in nulliparous women.

    PubMed

    Neels, Hedwig; Wyndaele, Jean-Jacques; Tjalma, Wiebren A A; De Wachter, Stefan; Wyndaele, Michel; Vermandel, Alexandra

    2016-05-01

    [Purpose] Proper pelvic floor function is important to avoid serious dysfunctions including incontinence, prolapse, and sexual problems. The current study evaluated the knowledge of young nulliparous women about their pelvic floor and identified what additional information they wanted. [Subjects and Methods] In this cross-sectional survey, a validated, 36 item questionnaire was distributed to 212 nulliparous women. The questionnaire addressed demography, pelvic floor muscles, pelvic floor dysfunction, and possible information sources. Descriptive statistics were generated for all variables. Stability and validity testing were performed using Kappa statistics and intra class correlation coefficients to define agreement for each question. The study was approved by the ethics Committee (B300201318334). [Results] Using a VAS scale (0 to 10), the women rated their knowledge about the pelvic floor as a mean of 2.4 (SD 2.01). A total of 93% of the women were insufficiently informed and requested more information; 25% had concerns about developing urinary incontinence, and 14% about fecal incontinence. Many of the women were unaware what pelvic floor training meant. [Conclusion] There was a significant lack of knowledge about pelvic floor function among nulliparous women. The majority of nulliparous women expressed a need for education, which might offer a way to reduce dysfunction.

  20. Automated sea floor extraction from underwater video

    NASA Astrophysics Data System (ADS)

    Kelly, Lauren; Rahmes, Mark; Stiver, James; McCluskey, Mike

    2016-05-01

    Ocean floor mapping using video is a method to simply and cost-effectively record large areas of the seafloor. Obtaining visual and elevation models has noteworthy applications in search and recovery missions. Hazards to navigation are abundant and pose a significant threat to the safety, effectiveness, and speed of naval operations and commercial vessels. This project's objective was to develop a workflow to automatically extract metadata from marine video and create image optical and elevation surface mosaics. Three developments made this possible. First, optical character recognition (OCR) by means of two-dimensional correlation, using a known character set, allowed for the capture of metadata from image files. Second, exploiting the image metadata (i.e., latitude, longitude, heading, camera angle, and depth readings) allowed for the determination of location and orientation of the image frame in mosaic. Image registration improved the accuracy of mosaicking. Finally, overlapping data allowed us to determine height information. A disparity map was created using the parallax from overlapping viewpoints of a given area and the relative height data was utilized to create a three-dimensional, textured elevation map.