Science.gov

Sample records for 2nd generation system

  1. Life Cycle Systems Engineering Approach to NASA's 2nd Generation Reusable Launch Vehicle

    NASA Technical Reports Server (NTRS)

    Thomas, Dale; Smith, Charles; Safie, Fayssal; Kittredge, Sheryl

    2002-01-01

    The overall goal of the 2nd Generation RLV Program is to substantially reduce technical and business risks associated with developing a new class of reusable launch vehicles. NASA's specific goals are to improve the safety of a 2nd- generation system by 2 orders of magnitude - equivalent to a crew risk of 1 -in- 10,000 missions - and decrease the cost tenfold, to approximately $1,000 per pound of payload launched. Architecture definition is being conducted in parallel with the maturating of key technologies specifically identified to improve safety and reliability, while reducing operational costs. An architecture broadly includes an Earth-to-orbit reusable launch vehicle, on-orbit transfer vehicles and upper stages, mission planning, ground and flight operations, and support infrastructure, both on the ground and in orbit. The systems engineering approach ensures that the technologies developed - such as lightweight structures, long-life rocket engines, reliable crew escape, and robust thermal protection systems - will synergistically integrate into the optimum vehicle. Given a candidate architecture that possesses credible physical processes and realistic technology assumptions, the next set of analyses address the system's functionality across the spread of operational scenarios characterized by the design reference missions. The safety/reliability and cost/economics associated with operating the system will also be modeled and analyzed to answer the questions "How safe is it?" and "How much will it cost to acquire and operate?" The systems engineering review process factors in comprehensive budget estimates, detailed project schedules, and business and performance plans, against the goals of safety, reliability, and cost, in addition to overall technical feasibility. This approach forms the basis for investment decisions in the 2nd Generation RLV Program's risk-reduction activities. Through this process, NASA will continually refine its specialized needs and

  2. Systems Engineering Approach to Technology Integration for NASA's 2nd Generation Reusable Launch Vehicle

    NASA Technical Reports Server (NTRS)

    Thomas, Dale; Smith, Charles; Thomas, Leann; Kittredge, Sheryl

    2002-01-01

    The overall goal of the 2nd Generation RLV Program is to substantially reduce technical and business risks associated with developing a new class of reusable launch vehicles. NASA's specific goals are to improve the safety of a 2nd generation system by 2 orders of magnitude - equivalent to a crew risk of 1-in-10,000 missions - and decrease the cost tenfold, to approximately $1,000 per pound of payload launched. Architecture definition is being conducted in parallel with the maturating of key technologies specifically identified to improve safety and reliability, while reducing operational costs. An architecture broadly includes an Earth-to-orbit reusable launch vehicle, on-orbit transfer vehicles and upper stages, mission planning, ground and flight operations, and support infrastructure, both on the ground and in orbit. The systems engineering approach ensures that the technologies developed - such as lightweight structures, long-life rocket engines, reliable crew escape, and robust thermal protection systems - will synergistically integrate into the optimum vehicle. To best direct technology development decisions, analytical models are employed to accurately predict the benefits of each technology toward potential space transportation architectures as well as the risks associated with each technology. Rigorous systems analysis provides the foundation for assessing progress toward safety and cost goals. The systems engineering review process factors in comprehensive budget estimates, detailed project schedules, and business and performance plans, against the goals of safety, reliability, and cost, in addition to overall technical feasibility. This approach forms the basis for investment decisions in the 2nd Generation RLV Program's risk-reduction activities. Through this process, NASA will continually refine its specialized needs and identify where Defense and commercial requirements overlap those of civil missions.

  3. Systems Engineering Approach to Technology Integration for NASA's 2nd Generation Reusable Launch Vehicle

    NASA Technical Reports Server (NTRS)

    Thomas, Dale; Smith, Charles; Thomas, Leann; Kittredge, Sheryl

    2002-01-01

    The overall goal of the 2nd Generation RLV Program is to substantially reduce technical and business risks associated with developing a new class of reusable launch vehicles. NASA's specific goals are to improve the safety of a 2nd-generation system by 2 orders of magnitude - equivalent to a crew risk of 1-in-10,000 missions - and decrease the cost tenfold, to approximately $1,000 per pound of payload launched. Architecture definition is being conducted in parallel with the maturating of key technologies specifically identified to improve safety and reliability, while reducing operational costs. An architecture broadly includes an Earth-to-orbit reusable launch vehicle, on-orbit transfer vehicles and upper stages, mission planning, ground and flight operations, and support infrastructure, both on the ground and in orbit. The systems engineering approach ensures that the technologies developed - such as lightweight structures, long-life rocket engines, reliable crew escape, and robust thermal protection systems - will synergistically integrate into the optimum vehicle. To best direct technology development decisions, analytical models are employed to accurately predict the benefits of each technology toward potential space transportation architectures as well as the risks associated with each technology. Rigorous systems analysis provides the foundation for assessing progress toward safety and cost goals. The systems engineering review process factors in comprehensive budget estimates, detailed project schedules, and business and performance plans, against the goals of safety, reliability, and cost, in addition to overall technical feasibility. This approach forms the basis for investment decisions in the 2nd Generation RLV Program's risk-reduction activities. Through this process, NASA will continually refine its specialized needs and identify where Defense and commercial requirements overlap those of civil missions.

  4. 2nd & 3rd Generation Vehicle Subsystems

    NASA Technical Reports Server (NTRS)

    2000-01-01

    This paper contains viewgraph presentation on the "2nd & 3rd Generation Vehicle Subsystems" project. The objective behind this project is to design, develop and test advanced avionics, power systems, power control and distribution components and subsystems for insertion into a highly reliable and low-cost system for a Reusable Launch Vehicles (RLV). The project is divided into two sections: 3rd Generation Vehicle Subsystems and 2nd Generation Vehicle Subsystems. The following topics are discussed under the first section, 3rd Generation Vehicle Subsystems: supporting the NASA RLV program; high-performance guidance & control adaptation for future RLVs; Evolvable Hardware (EHW) for 3rd generation avionics description; Scaleable, Fault-tolerant Intelligent Network or X(trans)ducers (SFINIX); advance electric actuation devices and subsystem technology; hybrid power sources and regeneration technology for electric actuators; and intelligent internal thermal control. Topics discussed in the 2nd Generation Vehicle Subsystems program include: design, development and test of a robust, low-maintenance avionics with no active cooling requirements and autonomous rendezvous and docking systems; design and development of a low maintenance, high reliability, intelligent power systems (fuel cells and battery); and design of a low cost, low maintenance high horsepower actuation systems (actuators).

  5. Improved beam spot measurements in the 2nd generation proton beam writing system

    NASA Astrophysics Data System (ADS)

    Yao, Yong; van Mourik, Martin W.; Santhana Raman, P.; van Kan, Jeroen A.

    2013-07-01

    Nanosized ion beams (especially proton and helium) play a pivotal role in the field of ion beam lithography and ion beam analysis. Proton beam writing has shown lithographic details down to the 20 nm level, limited by the proton beam spot size. Introducing a smaller spot size will allow smaller lithographic features. Smaller probe sizes, will also drastically improve the spatial resolution for ion beam analysis techniques. Among many other requirements, having an ideal resolution standard, used for beam focusing and a reliable focusing method, is an important pre-requisite for sub-10 nm beam spot focusing. In this paper we present the fabrication processes of a free-standing resolution standard with reduced side-wall projection and high side-wall verticality. The resulting grid is orthogonal (90.0° ± 0.1), has smooth edges with better than 6 nm side-wall projection. The new resolution standard has been used in focusing a 2 MeV H2+ beam in the 2nd generation PBW system at Center for Ion Beam Applications, NUS. The beam size has been characterized using on- and off-axis scanning transmission ion microscopy (STIM) and ion induced secondary electron detection, carried out with a newly installed micro channel plate electron detector. The latter has been shown to be a realistic alternative to STIM measurements, as the drawback of PIN diode detector damage is alleviated. With these improvements we show reproducible beam focusing down to 14 nm.

  6. 2nd Generation ELT Performance Specification Development

    NASA Technical Reports Server (NTRS)

    Stimson, Chad M.

    2015-01-01

    NASA Search And Rescue is supporting RTCA SC-229 with research and recommendations for performance specifications for the 2nd generation of emergency locator transmitters. Areas for improvement and methods for collecting data will be presented.

  7. 2nd Generation RLV Risk Definition Program

    NASA Technical Reports Server (NTRS)

    Davis, Robert M.; Stucker, Mark (Technical Monitor)

    2000-01-01

    The 2nd Generation RLV Risk Reduction Mid-Term Report summarizes the status of Kelly Space & Technology's activities during the first two and one half months of the program. This report was presented to the cognoscente Contracting Officer's Technical Representative (COTR) and selected Marshall Space Flight Center staff members on 26 September 2000. The report has been approved and is distributed on CD-ROM (as a PowerPoint file) in accordance with the terms of the subject contract, and contains information and data addressing the following: (1) Launch services demand and requirements; (2) Architecture, alternatives, and requirements; (3) Costs, pricing, and business cases analysis; (4) Commercial financing requirements, plans, and strategy; (5) System engineering processes and derived requirements; and (6) RLV system trade studies and design analysis.

  8. Integrated vehicle test bed for IVHM systems on 2nd generation RLV

    NASA Technical Reports Server (NTRS)

    James, M. L.; Baroth, E.; Mellinger, L.; Park, H.; Stough, T.; Brown, S. A.; Meyer, C. M.

    2003-01-01

    The IVTB concept is to validate spacecraft system designs and evaluate new technologies; its focus is to identify and resolve problems at the early stages of development and facilitate new technology transfer.

  9. 2nd Generation Reusable Launch Vehicle NASA Led Propulsion Tasks

    NASA Technical Reports Server (NTRS)

    Richards, Steve

    2000-01-01

    Design, development and test of a 2nd generation Reusable Launch Vehicle (RLV) is presented. This current paper discusses the following: 2nd Generation RLV Propulsion Project, Overview of NASA Led Tasks in Propulsion, Gen2 Turbo Machinery Technology Demonstrator, and Combustion Devices Test Bed, GRCop-84 Sheet For Combustion Chambers, Nozzles and Large Actively Cooled Structures

  10. 2nd Generation RLV: Program Goals and Acquisition Strategy

    NASA Technical Reports Server (NTRS)

    Graham, J. Bart; Dumbacher, D. L. (Technical Monitor)

    2001-01-01

    The risk to loss of life for Space Shuttle crewmembers is approximately one in 245 missions. U.S. launch service providers captured nearly 100%, of the commercial launch market revenues in the mid 1980s. Today, the U.S. captures less than 50% of that market. A launch system architecture is needed that will dramatically increase the safety of space flight while significantly reducing the cost. NASA's Space Launch Initiative, which is implemented by the 2nd Generation RLV Program Office at Marshall Space Flight Center, seeks to develop technology and reusable launch vehicle concepts which satisfy the commercial launch market needs and the unique needs of NASA. Presented in this paper are the five primary elements of NASA's Integrated Space Transportation Plan along with the highest level goals and the acquisition strategy of the 2nd Generation RLV Program. Approval of the Space Launch Initiative FY01 budget of $290M is seen as a major commitment by the Agency and the Nation to realize the commercial potential that space offers and to move forward in the exploration of space.

  11. 2nd Generation QUATARA Flight Computer Project

    NASA Technical Reports Server (NTRS)

    Falker, Jay; Keys, Andrew; Fraticelli, Jose Molina; Capo-Iugo, Pedro; Peeples, Steven

    2015-01-01

    Single core flight computer boards have been designed, developed, and tested (DD&T) to be flown in small satellites for the last few years. In this project, a prototype flight computer will be designed as a distributed multi-core system containing four microprocessors running code in parallel. This flight computer will be capable of performing multiple computationally intensive tasks such as processing digital and/or analog data, controlling actuator systems, managing cameras, operating robotic manipulators and transmitting/receiving from/to a ground station. In addition, this flight computer will be designed to be fault tolerant by creating both a robust physical hardware connection and by using a software voting scheme to determine the processor's performance. This voting scheme will leverage on the work done for the Space Launch System (SLS) flight software. The prototype flight computer will be constructed with Commercial Off-The-Shelf (COTS) components which are estimated to survive for two years in a low-Earth orbit.

  12. Super Boiler 2nd Generation Technology for Watertube Boilers

    SciTech Connect

    Mr. David Cygan; Dr. Joseph Rabovitser

    2012-03-31

    This report describes Phase I of a proposed two phase project to develop and demonstrate an advanced industrial watertube boiler system with the capability of reaching 94% (HHV) fuel-to-steam efficiency and emissions below 2 ppmv NOx, 2 ppmv CO, and 1 ppmv VOC on natural gas fuel. The boiler design would have the capability to produce >1500 F, >1500 psig superheated steam, burn multiple fuels, and will be 50% smaller/lighter than currently available watertube boilers of similar capacity. This project is built upon the successful Super Boiler project at GTI. In that project that employed a unique two-staged intercooled combustion system and an innovative heat recovery system to reduce NOx to below 5 ppmv and demonstrated fuel-to-steam efficiency of 94% (HHV). This project was carried out under the leadership of GTI with project partners Cleaver-Brooks, Inc., Nebraska Boiler, a Division of Cleaver-Brooks, and Media and Process Technology Inc., and project advisors Georgia Institute of Technology, Alstom Power Inc., Pacific Northwest National Laboratory and Oak Ridge National Laboratory. Phase I of efforts focused on developing 2nd generation boiler concepts and performance modeling; incorporating multi-fuel (natural gas and oil) capabilities; assessing heat recovery, heat transfer and steam superheating approaches; and developing the overall conceptual engineering boiler design. Based on our analysis, the 2nd generation Industrial Watertube Boiler when developed and commercialized, could potentially save 265 trillion Btu and $1.6 billion in fuel costs across U.S. industry through increased efficiency. Its ultra-clean combustion could eliminate 57,000 tons of NOx, 460,000 tons of CO, and 8.8 million tons of CO2 annually from the atmosphere. Reduction in boiler size will bring cost-effective package boilers into a size range previously dominated by more expensive field-erected boilers, benefiting manufacturers and end users through lower capital costs.

  13. Advances with the new AIMS fab 193 2nd generation: a system for the 65 nm node including immersion

    NASA Astrophysics Data System (ADS)

    Zibold, Axel M.; Poortinga, E.; Doornmalen, H. v.; Schmid, R.; Scherubl, T.; Harnisch, W.

    2005-06-01

    The Aerial Image Measurement System, AIMS, for 193nm lithography emulation is established as a standard for the rapid prediction of wafer printability for critical structures including dense patterns and defects or repairs on masks. The main benefit of AIMS is to save expensive image qualification consisting of test wafer exposures followed by wafer CD-SEM resist or wafer analysis. By adjustment of numerical aperture (NA), illumination type and partial coherence (σ) to match any given stepper/ scanner, AIMS predicts the printability of 193nm reticles such as binary with, or without OPC and phase shifting. A new AIMS fab 193 second generation system with a maximum NA of 0.93 is now available. Improvements in field uniformity, stability over time, measurement automation and higher throughput meet the challenging requirements of the 65nm node. A new function, "Global CD Map" can be applied to automatically measure and analyse the global CD uniformity of repeating structures across a reticle. With the options of extended depth-of-focus (EDOF) software and the upcoming linear polarisation capability in the illumination the new AIMS fab 193 second generation system is able to cover both dry and immersion requirements for NA < 1. Rigorous simulations have been performed to study the effects of polarisation for imaging by comparing the aerial image of the AIMS to the resist image of the scanner.

  14. The 2nd Generation Real Time Mission Monitor (RTMM) Development

    NASA Technical Reports Server (NTRS)

    Blakeslee, Richard; Goodman, Michael; Meyer, Paul; Hardin, Danny; Hall, John; He, Yubin; Regner, Kathryn; Conover, Helen; Smith, Tammy; Lu, Jessica; Garrett, Michelle

    2009-01-01

    The NASA Real Time Mission Monitor (RTMM) is a visualization and information system that fuses multiple Earth science data sources, to enable real time decisionmaking for airborne and ground validation experiments. Developed at the National Aeronautics and Space Administration (NASA) Marshall Space Flight Center, RTMM is a situational awareness, decision-support system that integrates satellite imagery and orbit data, radar and other surface observations (e.g., lightning location network data), airborne navigation and instrument data sets, model output parameters, and other applicable Earth science data sets. The integration and delivery of this information is made possible using data acquisition systems, network communication links, network server resources, and visualizations through the Google Earth virtual globe application. In order to improve the usefulness and efficiency of the RTMM system, capabilities are being developed to allow the end-user to easily configure RTMM applications based on their mission-specific requirements and objectives. This second generation RTMM is being redesigned to take advantage of the Google plug-in capabilities to run multiple applications in a web browser rather than the original single application Google Earth approach. Currently RTMM employs a limited Service Oriented Architecture approach to enable discovery of mission specific resources. We are expanding the RTMM architecture such that it will more effectively utilize the Open Geospatial Consortium Sensor Web Enablement services and other new technology software tools and components. These modifications and extensions will result in a robust, versatile RTMM system that will greatly increase flexibility of the user to choose which science data sets and support applications to view and/or use. The improvements brought about by RTMM 2nd generation system will provide mission planners and airborne scientists with enhanced decision-making tools and capabilities to more

  15. The 2nd Generation Real Time Mission Monitor (RTMM) Development

    NASA Astrophysics Data System (ADS)

    Blakeslee, R. J.; Goodman, M.; Hardin, D. M.; Hall, J.; Yubin He, M.; Regner, K.; Conover, H.; Smith, T.; Meyer, P.; Lu, J.; Garrett, M.

    2009-12-01

    The NASA Real Time Mission Monitor (RTMM) is a visualization and information system that fuses multiple Earth science data sources, to enable real time decision-making for airborne and ground validation experiments. Developed at the National Aeronautics and Space Administration (NASA) Marshall Space Flight Center, RTMM is a situational awareness, decision-support system that integrates satellite imagery and orbit data, radar and other surface observations (e.g., lightning location network data), airborne navigation and instrument data sets, model output parameters, and other applicable Earth science data sets. The integration and delivery of this information is made possible using data acquisition systems, network communication links, network server resources, and visualizations through the Google Earth virtual globe application. In order to improve the usefulness and efficiency of the RTMM system, capabilities are being developed to allow the end-user to easily configure RTMM applications based on their mission-specific requirements and objectives. This second generation RTMM is being redesigned to take advantage of the Google plug-in capabilities to run multiple applications in a web browser rather than the original single application Google Earth approach. Currently RTMM employs a limited Service Oriented Architecture approach to enable discovery of mission specific resources. We are expanding the RTMM architecture such that it will more effectively utilize the Open Geospatial Consortium Sensor Web Enablement services and other new technology software tools and components. These modifications and extensions will result in a robust, versatile RTMM system that will greatly increase flexibility of the user to choose which science data sets and support applications to view and/or use. The improvements brought about by RTMM 2nd generation system will provide mission planners and airborne scientists with enhanced decision-making tools and capabilities to more

  16. Philips' 2nd generation Novallure LED candle lamp

    NASA Astrophysics Data System (ADS)

    Li, Yun; Pei, Zhigang; Yuan, Chuan; Jiang, Tan; Lu, Zhengsong; Wang, Yuqian; Duan, Xiaoqing; Xiong, Yan; Zhong, Hong; Liu, Ye

    2010-08-01

    Finding an energy efficient replacement of incandescent candle lamp has been a technical challenge. Compact fluorescent lamps, for example, can be miniaturized to fit the form factor of a candle lamp but they fail to reproduce its "sparkle" effect. Empowered by solid state lighting technology along with original optical design, Philips has successfully developed LED-powered candle lamps "Novallure" with great energy savings (2W power consumption with lumen output of 55 lumen) and the "butterfly" radiation pattern that mimics the sparkle effect from an incandescent candle lamp. With new high performance LED packages, novel under-cut prismatic optics and state-of-the-art electronic driver solution and thermal solution, we have developed a 2nd generation Novallure with breakthrough performance: a dimmable 2700K 136 lumen LED candle lamp with CRI 90.

  17. Aging Studies of 2nd Generation BaBar RPCs

    SciTech Connect

    Band, H.R.; /SLAC

    2007-09-25

    The BaBar detector, operating at the PEPII B factory of the Stanford Linear Accelerator Center (SLAC), installed over 200 2nd generation Resistive Plate Chambers (RPCs) in 2002. The streamer rates produced by backgrounds and signals from normal BaBar running vary considerably (0.1- >20 Hz/cm2) depending on the layer and position of the chambers, thus providing a broad spectrum test of RPC performance and aging. The lowest rate chambers have performed very well with stable efficiencies averaging 95%. Other chambers had rate-dependant inefficiencies due to Bakelite drying which were reversed by the introduction of humidified gases. RPC inefficiencies in the highest rate regions of the higher rate chambers have been observed and also found to be rate dependant. The inefficient regions grow with time and have not yet been reduced by operation with humidified input gas. Three of these chambers were converted to avalanche mode operation and display significantly improved efficiencies. The rate of production of HF in the RPC exhaust gases was measured in avalanche and streamer mode RPCs and found to be comparable despite the lower current of the avalanche mode RPCs.

  18. NASA 2nd Generation RLV Program Introduction, Status and Future Plans

    NASA Technical Reports Server (NTRS)

    Dumbacher, Dan L.; Smith, Dennis E. (Technical Monitor)

    2002-01-01

    The Space Launch Initiative (SLI), managed by the Second Generation Reusable Launch Vehicle (2ndGen RLV) Program, was established to examine the possibility of revolutionizing space launch capabilities, define conceptual architectures, and concurrently identify the advanced technologies required to support a next-generation system. Initial Program funds have been allocated to design, evaluate, and formulate realistic plans leading to a 2nd Gen RLV full-scale development (FSD) decision by 2006. Program goals are to reduce both risk and cost for accessing the limitless opportunities afforded outside Earth's atmosphere fo civil, defense, and commercial enterprises. A 2nd Gen RLV architecture includes a reusable Earth-to-orbit launch vehicle, an on-orbit transport and return vehicle, ground and flight operations, mission planning, and both on-orbit and on-the-ground support infrastructures All segments of the architecture must advance in step with development of the RLV if a next-generation system is to be fully operational early next decade. However, experience shows that propulsion is the single largest contributor to unreliability during ascent, requires the largest expenditure of time for maintenance, and takes a long time to develop; therefore, propulsion is the key to meeting safety, reliability, and cost goals. For these reasons, propulsion is SLI's top technology investment area.

  19. 2nd Generation Reusable Launch Vehicle Potential Commercial Development Scenarios

    NASA Technical Reports Server (NTRS)

    Creech, Stephen D.; Rogacki, John R. (Technical Monitor)

    2001-01-01

    The presentation will discuss potential commercial development scenarios for a Second Generation Reusable Launch Vehicle. The analysis of potential scenarios will include commercial rates of return, government return on investment, and market considerations. The presentation will include policy considerations in addition to analysis of Second Generation Reusable Launch Vehicle economics. The data discussed is being developed as a part of NASA's Second Generation Reusable Launch Vehicle Program, for consideration as potential scenarios for enabling a next generation system. Material will include potential scenarios not previously considered by NASA or presented at other conferences. Candidate paper has not been presented at a previous meeting, and conference attendance of the author has been approved by NASA.

  20. Support to 2nd Generation RLV Propulsion Project Office

    NASA Technical Reports Server (NTRS)

    Lee, Thomas J.

    2002-01-01

    In this final report regarding support to the second generation RLV (Reusable Launch Vehicle) propulsion project office, a list of tasks accomplished is presented. During this period, Lee & Associates, LLC participated in numerous Systems Requirements Reviews (SRR) related to the Cobra development program.

  1. Effects of Thermal Cycling on Control and Irradiated EPC 2nd Generation GaN FETs

    NASA Technical Reports Server (NTRS)

    Patterson, Richard L.; Scheick, Leif; Lauenstein, Jean-Marie; Casey, Megan; Hammoud, Ahmad

    2013-01-01

    The power systems for use in NASA space missions must work reliably under harsh conditions including radiation, thermal cycling, and exposure to extreme temperatures. Gallium nitride semiconductors show great promise, but information pertaining to their performance is scarce. Gallium nitride N-channel enhancement-mode field effect transistors made by EPC Corporation in a 2nd generation of manufacturing were exposed to radiation followed by long-term thermal cycling in order to address their reliability for use in space missions. Results of the experimental work are presented and discussed.

  2. Coal gasification for power generation. 2nd ed.

    SciTech Connect

    2006-10-15

    The report gives an overview of the opportunities for coal gasification in the power generation industry. It provides a concise look at the challenges faced by coal-fired generation, the ability of coal gasification to address these challenges, and the current state of IGCC power generation. Topics covered in the report include: An overview of coal generation including its history, the current market environment, and the status of coal gasification; A description of gasification technology including processes and systems; An analysis of the key business factors that are driving increased interest in coal gasification; An analysis of the barriers that are hindering the implementation of coal gasification projects; A discussion of Integrated Gasification Combined Cycle (IGCC) technology; An evaluation of IGCC versus other generation technologies; A discussion of IGCC project development options; A discussion of the key government initiatives supporting IGCC development; Profiles of the key gasification technology companies participating in the IGCC market; and A description of existing and planned coal IGCC projects.

  3. Integration of health management and support systems is key to achieving cost reduction and operational concept goals of the 2nd generation reusable launch vehicle

    NASA Astrophysics Data System (ADS)

    Koon, Phillip L.; Greene, Scott

    2002-07-01

    Our aerospace customers are demanding that we drastically reduce the cost of operating and supporting our products. Our space customer in particular is looking for the next generation of reusable launch vehicle systems to support more aircraft like operation. To achieve this goal requires more than an evolution in materials, processes and systems, what is required is a paradigm shift in the design of the launch vehicles and the processing systems that support the launch vehicles. This paper describes the Automated Informed Maintenance System (AIM) we are developing for NASA's Space Launch Initiative (SLI) Second Generation Reusable Launch Vehicle (RLV). Our system includes an Integrated Health Management (IHM) system for the launch vehicles and ground support systems, which features model based diagnostics and prognostics. Health Management data is used by our AIM decision support and process aids to automatically plan maintenance, generate work orders and schedule maintenance activities along with the resources required to execute these processes. Our system will automate the ground processing for a spaceport handling multiple RLVs executing multiple missions. To accomplish this task we are applying the latest web based distributed computing technologies and application development techniques.

  4. Coal-fired generation staging a comeback. 2nd ed.

    SciTech Connect

    2007-07-01

    The report is an overview of the renewed U.S. market interest in coal-fired power generation. It provides a concise look at what is driving interest in coal-fired generation, the challenges faced in implementing coal-fired generation projects, and the current and future state of coal-fired generation. Topics covered in the report include: An overview of coal-fired generation including its history, the current market environment, and its future prospects; An analysis of the key business factors that are driving renewed interest in coal-fired generation; An analysis of the challenges that are hindering the implementation of coal-fired generation projects; A description of coal-fired generation technologies; A review of the economic drivers of coal-fired generation project success; An evaluation of coal-fired generation versus other generation technologies; A discussion of the key government initiatives supporting new coal-fired generation; and A listing of planned coal-fired generation projects. 13 figs., 12 tabs., 1 app.

  5. Operations Analysis of the 2nd Generation Reusable Launch Vehicle

    NASA Technical Reports Server (NTRS)

    Noneman, Steven R.; Smith, C. A. (Technical Monitor)

    2002-01-01

    The Space Launch Initiative (SLI) program is developing a second-generation reusable launch vehicle. The program goals include lowering the risk of loss of crew to 1 in 10,000 and reducing annual operations cost to one third of the cost of the Space Shuttle. The SLI missions include NASA, military and commercial satellite launches and crew and cargo launches to the space station. The SLI operations analyses provide an assessment of the operational support and infrastructure needed to operate candidate system architectures. Measures of the operability are estimated (i.e. system dependability, responsiveness, and efficiency). Operations analysis is used to determine the impact of specific technologies on operations. A conceptual path to reducing annual operations costs by two thirds is based on key design characteristics, such as reusability, and improved processes lowering labor costs. New operations risks can be expected to emerge. They can be mitigated with effective risk management with careful identification, assignment, tracking, and closure. SLI design characteristics such as nearly full reusability, high reliability, advanced automation, and lowered maintenance and servicing coupled with improved processes are contributors to operability and large operating cost reductions.

  6. Control system for the 2nd generation Berkeley AutoMounters (BAM2) at GM/CA CAT macromolecular crystallography beamlines

    PubMed Central

    Makarov, O.; Hilgart, M.; Ogata, C.; Pothineni, S.; Cork, C.

    2011-01-01

    GM/CA CAT at Sector 23 of the Advanced Photon Source (APS) is an NIH funded facility for crystallographic structure determination of biological macromolecules by X-ray diffraction. A second generation Berkeley automounter is being integrated into the beamline control system at the 23-BM experimental station. This new device replaces the previous all-pneumatic gripper motions with a combination of pneumatics and XYZ motorized linear stages. The latter adds a higher degree of flexibility to the robot including auto-alignment capability, accommodation of a larger capacity sample Dewar of arbitrary shape, and support for advanced operations such as crystal washing, while preserving the overall simplicity and efficiency of the Berkeley automounter design. PMID:21822343

  7. SHARK (System for coronagraphy with High order Adaptive optics from R to K band): a proposal for the LBT 2nd generation instrumentation

    NASA Astrophysics Data System (ADS)

    Farinato, Jacopo; Pedichini, Fernando; Pinna, Enrico; Baciotti, Francesca; Baffa, Carlo; Baruffolo, Andrea; Bergomi, Maria; Bruno, Pietro; Cappellaro, Enrico; Carbonaro, Luca; Carlotti, Alexis; Centrone, Mauro; Close, Laird; Codona, Johanan; Desidera, Silvano; Dima, Marco; Esposito, Simone; Fantinel, Daniela; Farisato, Giancarlo; Fontana, Adriano; Gaessler, Wolfgang; Giallongo, Emanuele; Gratton, Raffaele; Greggio, Davide; Guerra, Juan Carlos; Guyon, Olivier; Hinz, Philip; Leone, Francesco; Lisi, Franco; Magrin, Demetrio; Marafatto, Luca; Munari, Matteo; Pagano, Isabella; Puglisi, Alfio; Ragazzoni, Roberto; Salasnich, Bernardo; Sani, Eleonora; Scuderi, Salvo; Stangalini, Marco; Testa, Vincenzo; Verinaud, Christophe; Viotto, Valentina

    2014-08-01

    This article presents a proposal aimed at investigating the technical feasibility and the scientific capabilities of high contrast cameras to be implemented at LBT. Such an instrument will fully exploit the unique LBT capabilities in Adaptive Optics (AO) as demonstrated by the First Light Adaptive Optics (FLAO) system, which is obtaining excellent results in terms of performance and reliability. The aim of this proposal is to show the scientific interest of such a project, together with a conceptual opto-mechanical study which shows its technical feasibility, taking advantage of the already existing AO systems, which are delivering the highest Strehl experienced in nowadays existing telescopes. Two channels are foreseen for SHARK, a near infrared channel (2.5-0.9 um) and a visible one (0.9 - 0.6 um), both providing imaging and coronagraphic modes. The visible channel is equipped with a very fast and low noise detector running at 1.0 kfps and an IFU spectroscopic port to provide low and medium resolution spectra of 1.5 x 1.5 arcsec fields. The search of extra solar giant planets is the main science case and the driver for the technical choices of SHARK, but leaving room for several other interesting scientific topics, which will be briefly depicted here.

  8. Technical Issues Map for the NHI System Interface and Support Systems Area: 2nd Quarter FY07

    SciTech Connect

    Steven R. Sherman

    2007-03-01

    This document provides a mapping of technical issues associated with development of the Next Generation Nuclear Plant (NGNP) intermediate heat transport loop and nuclear hydrogen plant support systems to the work that has been accomplished or is currently underway in the 2nd quarter of FY07.

  9. Automated CFD Database Generation for a 2nd Generation Glide-Back-Booster

    NASA Technical Reports Server (NTRS)

    Chaderjian, Neal M.; Rogers, Stuart E.; Aftosmis, Michael J.; Pandya, Shishir A.; Ahmad, Jasim U.; Tejmil, Edward

    2003-01-01

    A new software tool, AeroDB, is used to compute thousands of Euler and Navier-Stokes solutions for a 2nd generation glide-back booster in one week. The solution process exploits a common job-submission grid environment using 13 computers located at 4 different geographical sites. Process automation and web-based access to the database greatly reduces the user workload, removing much of the tedium and tendency for user input errors. The database consists of forces, moments, and solution files obtained by varying the Mach number, angle of attack, and sideslip angle. The forces and moments compare well with experimental data. Stability derivatives are also computed using a monotone cubic spline procedure. Flow visualization and three-dimensional surface plots are used to interpret and characterize the nature of computed flow fields.

  10. Computer Generation of Subduction Frequencies for 2ND Order Phase Transitions in Two-Dimensions

    NASA Astrophysics Data System (ADS)

    Deonarine, Samaroo

    The Landau theory of 2nd order phase transitions and Group theory Criteria are used to predict which subgroups G (L-HOOK EQ) G(,0) can occur in transitions for 2-D systems (plane-group to plane-group and diperiodic to diperiodic). Previous work 1 on the 17 plane space groups has been based on the tables of Coxeter & Moser 2 and the International Tables of X-ray Crystallography (ITXRC, 1965) 3 . These tables do not exhaust all the possible subgroups of a space group 4 . Since such explicit tables are non-existent for other families of space groups we have developed algorithms that make a systematic search of the parent unit cell of G(,0) to locate the origin and orientation of all its subgroups G, G (L-HOOK EQ) G(,0). We have written a RATFOR/FORTRAN program for the VAX 11-780 which will generate the subduction frequencies. (DIAGRAM, TABLE OR GRAPHIC OMITTED...PLEASE SEE DAI). for allowed second order phase transitions in 2-dimensional systems that are describable by the 80 diperiodic Groups G(,0) and G 5 . Our program gives a complete tabulation (Origin, new Translation Sublattice, Subduction Frequency, Subgroup and its Generators) of the allowed continuous or second order phase transitions from a parent diperiodic group G(,0) to another diperiodic subgroup G.

  11. Advanced Electron Beam Ion Sources (EBIS) for 2-nd generation carbon radiotherapy facilities

    NASA Astrophysics Data System (ADS)

    Shornikov, A.; Wenander, F.

    2016-04-01

    In this work we analyze how advanced Electron Beam Ion Sources (EBIS) can facilitate the progress of carbon therapy facilities. We will demonstrate that advanced ion sources enable operation of 2-nd generation ion beam therapy (IBT) accelerators. These new accelerator concepts with designs dedicated to IBT provide beams better suited for therapy and, are more cost efficient than contemporary IBT facilities. We will give a sort overview of the existing new IBT concepts and focus on those where ion source technology is the limiting factor. We will analyse whether this limitation can be overcome in the near future thanks to ongoing EBIS development.

  12. Emotional and Behavioral Disorders in 1.5th Generation, 2nd Generation Immigrant Children, and Foreign Adoptees.

    PubMed

    Tan, Tony Xing

    2016-10-01

    Existing theories (e.g., acculturative stress theory) cannot adequately explain why mental disorders in immigrants are less prevalent than in non-immigrants. In this paper, the culture-gene co-evolutionary theory of mental disorders was utilized to generate a novel hypothesis that connection to heritage culture reduces the risk for mental disorders in immigrant children. Four groups of children aged 2-17 years were identified from the 2007 United States National Survey of Children's Health: 1.5th generation immigrant children (n = 1378), 2nd generation immigrant children (n = 4194), foreign adoptees (n = 270), and non-immigrant children (n = 54,877). The 1.5th generation immigrant children's connection to their heritage culture is stronger than or similar to the 2nd generation immigrants, while the foreign adoptees have little connection to their birth culture. Controlling for age, sex, family type and SES, the odds for having ADD/ADHD, Conduct Disorder, Anxiety Disorder, and Depression diagnosis were the lowest for the 1.5th generation immigrant children, followed by the 2nd generation immigrant children and the foreign adoptees. The foreign adoptees and non-adopted children were similar in the odds of having these disorders. Connection to heritage culture might be the underlying mechanism that explained recent immigrants' lower rates of mental disorders. PMID:26972324

  13. The planar optics phase sensor: a study for the VLTI 2nd generation fringe tracker

    NASA Astrophysics Data System (ADS)

    Blind, Nicolas; Le Bouquin, Jean-Baptiste; Absil, Olivier; Alamir, Mazen; Berger, Jean-Philippe; Defrère, Denis; Feautrier, Philippe; Hénault, François; Jocou, Laurent; Kern, Pierre; Laurent, Thomas; Malbet, Fabien; Mourard, Denis; Rousselet-Perraut, Karine; Sarlette, Alain; Surdej, Jean; Tarmoul, Nassima; Tatulli, Eric; Vincent, Lionel

    2010-07-01

    In a few years, the second generation instruments of the Very Large Telescope Interferometer (VLTI) will routinely provide observations with 4 to 6 telescopes simultaneously. To reach their ultimate performance, they will need a fringe sensor capable to measure in real time the randomly varying optical paths differences. A collaboration between LAOG (PI institute), IAGL, OCA and GIPSA-Lab has proposed the Planar Optics Phase Sensor concept to ESO for the 2nd Generation Fringe Tracker. This concept is based on the integrated optics technologies, enabling the conception of extremely compact interferometric instruments naturally providing single-mode spatial filtering. It allows operations with 4 and 6 telescopes by measuring the fringes position thanks to a spectrally dispersed ABCD method. We present here the main analysis which led to the current concept as well as the expected on-sky performance and the proposed design.

  14. Enabling the 2nd Generation in Space: Building Blocks for Large Scale Space Endeavours

    NASA Astrophysics Data System (ADS)

    Barnhardt, D.; Garretson, P.; Will, P.

    Today the world operates within a "first generation" space industrial enterprise, i.e. all industry is on Earth, all value from space is from bits (data essentially), and the focus is Earth-centric, with very limited parts of our population and industry participating in space. We are limited in access, manoeuvring, on-orbit servicing, in-space power, in-space manufacturing and assembly. The transition to a "Starship culture" requires the Earth to progress to a "second generation" space industrial base, which implies the need to expand the economic sphere of activity of mankind outside of an Earth-centric zone and into CIS-lunar space and beyond, with an equal ability to tap the indigenous resources in space (energy, location, materials) that will contribute to an expanding space economy. Right now, there is no comfortable place for space applications that are not discovery science, exploration, military, or established earth bound services. For the most part, space applications leave out -- or at least leave nebulous, unconsolidated, and without a critical mass -- programs and development efforts for infrastructure, industrialization, space resources (survey and process maturation), non-traditional and persistent security situational awareness, and global utilities -- all of which, to a far greater extent than a discovery and exploration program, may help determine the elements of a 2nd generation space capability. We propose a focus to seed the pre-competitive research that will enable global industry to develop the necessary competencies that we currently lack to build large scale space structures on-orbit, that in turn would lay the foundation for long duration spacecraft travel (i.e. key technologies in access, manoeuvrability, etc.). This paper will posit a vision-to-reality for a step wise approach to the types of activities the US and global space providers could embark upon to lay the foundation for the 2nd generation of Earth in space.

  15. The New 2nd-Generation SRF R&D Facility at Jefferson Lab: TEDF

    SciTech Connect

    Reece, Charles E.; Reilly, Anthony V.

    2012-09-01

    The US Department of Energy has funded a near-complete renovation of the SRF-based accelerator research and development facilities at Jefferson Lab. The project to accomplish this, the Technical and Engineering Development Facility (TEDF) Project has completed the first of two phases. An entirely new 3,100 m{sup 2} purpose-built SRF technical work facility has been constructed and was occupied in summer of 2012. All SRF work processes with the exception of cryogenic testing have been relocated into the new building. All cavity fabrication, processing, thermal treatment, chemistry, cleaning, and assembly work is collected conveniently into a new LEED-certified building. An innovatively designed 800 m2 cleanroom/chemroom suite provides long-term flexibility for support of multiple R&D and construction projects as well as continued process evolution. The characteristics of this first 2nd-generation SRF facility are described.

  16. The 2nd NASA Aerospace Pyrotechnic Systems Workshop

    NASA Technical Reports Server (NTRS)

    St.Cyr, William W. (Compiler)

    1994-01-01

    This NASA Conference Publication contains the proceedings of the Second NASA Aerospace Pyrotechnics Systems Workshop held at Sandia National Laboratories, Albuquerque, New Mexico, February 8-9, 1994. The papers are grouped by sessions: (1) Session 1 - Laser Initiation and Laser Systems; (2) Session 2 - Electric Initiation; (3) Session 3 - Mechanisms & Explosively Actuated Devices; (4) Session 4 - Analytical Methods and Studies; and (5) Session 5 - Miscellaneous. A sixth session, a panel discussion and open forum, concluded the workshop.

  17. RTS2 - Remote Telescope System, 2nd Version

    SciTech Connect

    Kubanek, Petr; Topinka, Martin; Strobl, Jan; Jelinek, Martin; Nekola, Martin; Hudec, Rene; Sanguino, Tomas de J. Mateo; Postigo, Antonio de Ugarte; Castro-Tirado, Alberto J.

    2004-09-28

    BART is a small remote controlled robotic CCD telescope, devoted to rapid observation of prompt gamma ray burst transients. During its operation since early 2001, it had three prompt observations with world-competitive response time. The constraints to object magnitude were estimated and published in GCN circulars. Telescope is located in Astronomical Institute of the Czech Academy of Sciences in Ondrejov. This poster describes its new control system, named RTS2, which has been in service since February 2003.

  18. InAs/GaSb type II superlattices for advanced 2nd and 3rd generation detectors

    NASA Astrophysics Data System (ADS)

    Walther, Martin; Rehm, Robert; Schmitz, Johannes; Fleissner, Joachim; Rutz, Frank; Kirste, Lutz; Scheibner, Ralf; Wendler, Joachim; Ziegler, Johann

    2010-01-01

    InAs/GaSb short-period superlattices (SL) based on GaSb, InAs and AlSb have proven their great potential for high performance infrared detectors. Lots of interest is currently focused on the development of short-period InAs/GaSb SLs for advanced 2nd and 3rd generation infrared detectors between 3 - 30 μm. For the fabrication of mono- and bispectral thermal imaging systems in the mid-wavelength infrared region (MWIR) a manufacturable technology for high responsivity thermal imaging systems has been developed. InAs/GaSb short-period superlattices can be fabricated with up to 1000 periods in the intrinsic region without revealing diffusion limited behavior. This enables the fabrication of InAs/GaSb SL camera systems with high responsivity comparable to state of the art CdHgTe and InSb detectors. The material system is also ideally suited for the fabrication of dual-color MWIR/MWIR InAs/GaSb SL camera systems with high quantum efficiency for missile approach warning systems with simultaneous and spatially coincident detection in both spectral channels.

  19. BMI differences in 1st and 2nd generation immigrants of Asian and European origin to Australia.

    PubMed

    Hauck, Katharina; Hollingsworth, Bruce; Morgan, Lawrie

    2011-01-01

    We estimate assimilation of immigrants' body mass index (BMI) to the host population of Australia over one generation, conducting separate analyses for immigrants from 7 regions of Europe and Asia. We use quantile regressions to allow for differing impact of generational status across 19 quantiles of BMI from under-weight to morbidly obese individuals. We find that 1st generation South European immigrants have higher, and South and East Asian immigrants have lower BMI than Australians, but have assimilated to the BMI of their hosts in the 2nd generation. There are no or only small BMI differences between Australians and 1st and 2nd generation immigrants from East Europe, North-West Europe, Middle East and Pacific regions. We conclude that both upward and downward assimilation in some immigrant groups is most likely caused by factors which can change over one generation (such as acculturation), and not factors which would take longer to change (such as genetics). Our results suggest that public health policies targeting the lifestyles of well educated Asian immigrants may be effective in preventing BMI increase in this subgroup. PMID:20869292

  20. Time resolved 2nd harmonic generation at LaAlO3/SrTiO3 Interfaces

    NASA Astrophysics Data System (ADS)

    Adhikari, Sanjay; Eom, Chang-Beom; Ryu, Sangwoo; Cen, Cheng

    2014-03-01

    Ultrafast spectroscopy can produce information of carrier/lattice dynamics, which is especially valuable for understanding phase transitions at LaAlO3/SrTiO3 interfaces. LaAlO3 (LAO) and SrTiO3 (STO) are both associated with wide band gap, which allows deep penetration of commonly used laser wavelengths and therefore usually leads to overwhelming bulk signal background. Here we report a time resolved study of a 2nd harmonic generation (SHG) signal resulting from impulsive below-the-band-gap optical pumping. The nonlinear nature of the signal enables us to probe the interface directly. Output of a home built Ti:Sapphire laser and BBO crystal were used to generate 30fs pulses of two colors (405nm and 810nm). The 405nm pulse was used to pump the LAO/STO interfaces, while 2nd harmonics of the 810nm pulse generated at the interfaces was probed as a function of the time delay. Signals from samples with varying LAO thicknesses clearly correlates to the metal-insulator transition. Distinct time dependent signals were observed at LAO/STO interfaces grown on different substrates. Experiments performed at different optical polarization geometries, interface electric fields and temperatures allow us to paint a clearer picture of the novel oxide heterostructures under investigation.

  1. STARS 2.0: 2nd-generation open-source archiving and query software

    NASA Astrophysics Data System (ADS)

    Winegar, Tom

    2008-07-01

    The Subaru Telescope is in process of developing an open-source alternative to the 1st-generation software and databases (STARS 1) used for archiving and query. For STARS 2, we have chosen PHP and Python for scripting and MySQL as the database software. We have collected feedback from staff and observers, and used this feedback to significantly improve the design and functionality of our future archiving and query software. Archiving - We identified two weaknesses in 1st-generation STARS archiving software: a complex and inflexible table structure and uncoordinated system administration for our business model: taking pictures from the summit and archiving them in both Hawaii and Japan. We adopted a simplified and normalized table structure with passive keyword collection, and we are designing an archive-to-archive file transfer system that automatically reports real-time status and error conditions and permits error recovery. Query - We identified several weaknesses in 1st-generation STARS query software: inflexible query tools, poor sharing of calibration data, and no automatic file transfer mechanisms to observers. We are developing improved query tools and sharing of calibration data, and multi-protocol unassisted file transfer mechanisms for observers. In the process, we have redefined a 'query': from an invisible search result that can only transfer once in-house right now, with little status and error reporting and no error recovery - to a stored search result that can be monitored, transferred to different locations with multiple protocols, reporting status and error conditions and permitting recovery from errors.

  2. Impact of Insulin Resistance on Neointimal Tissue Proliferation after 2nd-Generation Drug-Eluting Stent Implantation

    PubMed Central

    Yaguchi, Isao; Komatsu, Sachiko; Nakahara, Shiro; Kobayashi, Sayuki; Sakai, Yoshihiko; Taguchi, Isao

    2015-01-01

    Percutaneous coronary intervention is established as an effective treatment for patients with ischemic heart disease; in particular, drug-eluting stent implantation is known to suppress in-stent restenosis. Diabetes mellitus is an independent risk factor for restenosis, so reducing insulin resistance is being studied as a new treatment approach. In this prospective study, we sought to clarify the factors associated with in-stent restenosis after percutaneous coronary intervention, and we evaluated the homeostasis model assessment of insulin resistance (HOMA-IR) index as a predictor of restenosis. We enrolled 136 consecutive patients who underwent elective percutaneous coronary intervention at our hospital from February 2010 through April 2013. All were implanted with a 2nd-generation drug-eluting stent. We distributed the patients in accordance with their HOMA-IR index values into insulin-resistant Group P (HOMA-IR, ≥2.5; n=77) and noninsulin-resistant Group N (HOMA-IR, <2.5; n=59). Before and immediately after stenting, we measured reference diameter, minimal lumen diameter, and percentage of stenosis, and after 8 months we measured the last 2 factors and late lumen loss, all by means of quantitative coronary angiography. After 8 months, the mean minimal lumen diameter was smaller in Group P than that in Group N (1.85 ± 1.02 vs 2.37 ± 0.66 mm; P=0.037), and the mean late lumen loss was larger (0.4 ± 0.48 vs 0.16 ± 0.21 mm; P=0.025). These results suggest that insulin resistance affects neointimal tissue proliferation after 2nd-generation drug-eluting stent implantation. PMID:26413014

  3. Space Ops 2002: Bringing Space Operations into the 21st Century. Track 3: Operations, Mission Planning and Control. 2nd Generation Reusable Launch Vehicle-Concepts for Flight Operations

    NASA Technical Reports Server (NTRS)

    Hagopian, Jeff

    2002-01-01

    With the successful implementation of the International Space Station (ISS), the National Aeronautics and Space Administration (NASA) enters a new era of opportunity for scientific research. The ISS provides a working laboratory in space, with tremendous capabilities for scientific research. Utilization of these capabilities requires a launch system capable of routinely transporting crew and logistics to/from the ISS, as well as supporting ISS assembly and maintenance tasks. The Space Shuttle serves as NASA's launch system for performing these functions. The Space Shuttle also serves as NASA's launch system for supporting other science and servicing missions that require a human presence in space. The Space Shuttle provides proof that reusable launch vehicles are technically and physically implementable. However, a couple of problems faced by NASA are the prohibitive cost of operating and maintaining the Space Shuttle and its relative inability to support high launch rates. The 2nd Generation Reusable Launch Vehicle (2nd Gen RLV) is NASA's solution to this problem. The 2nd Gen RLV will provide a robust launch system with increased safety, improved reliability and performance, and less cost. The improved performance and reduced costs of the 2nd Gen RLV will free up resources currently spent on launch services. These resource savings can then be applied to scientific research, which in turn can be supported by the higher launch rate capability of the 2nd Gen RLV. The result is a win - win situation for science and NASA. While meeting NASA's needs, the 2nd Gen RLV also provides the United States aerospace industry with a commercially viable launch capability. One of the keys to achieving the goals of the 2nd Gen RLV is to develop and implement new technologies and processes in the area of flight operations. NASA's experience in operating the Space Shuttle and the ISS has brought to light several areas where automation can be used to augment or eliminate functions

  4. A Plan for Advanced Guidance and Control Technology for 2nd Generation Reusable Launch Vehicles

    NASA Technical Reports Server (NTRS)

    Hanson, John M.; Fogle, Frank (Technical Monitor)

    2002-01-01

    Advanced guidance and control (AG&C) technologies are critical for meeting safety/reliability and cost requirements for the next generation of reusable launch vehicle (RLV). This becomes clear upon examining the number of expendable launch vehicle failures in the recent past where AG&C technologies would have saved a RLV with the same failure mode, the additional vehicle problems where this technology applies, and the costs associated with mission design with or without all these failure issues. The state-of-the-art in guidance and control technology, as well as in computing technology, is at the point where we can took to the possibility of being able to safely return a RLV in any situation where it can physically be recovered. This paper outlines reasons for AG&C, current technology efforts, and the additional work needed for making this goal a reality.

  5. Outcome of Treatment of CML with 2nd Generation Tyrosine Kinase Inhibitors After Imatinib Failure

    PubMed Central

    Cornelison, A. Megan; Kantarjian, Hagop; Cortes, Jorge; Jabbour, Elias

    2015-01-01

    Although imatinib revolutionized the management of chronic myeloid leukemia (CML), recent data indicate a transformation in the treatment approach likely in the near future. For patients who fail with standard-dose imatinib therapy, imatinib dose escalation is a second-line option. However, high-dose imatinib is not an appropriate approach for patients experiencing drug toxicity, and there remain questions over the durability of responses achieved with this strategy. Alternative second-line options include the newer tyrosine kinase inhibitors (TKIs) like dasatinib and nilotinib. A substantial amount of long-term data for these agents is available. Although both are potent and specific BCR-ABL TKIs, dasatinib and nilotinib exhibit unique pharmacological profiles and response patterns relative to different patient characteristics, such as disease stage and BCR-ABL mutational status. The superiority of second generation TKIs over imatinib in newly diagnosed disease has been recognized as well. They induce high and rapid rates of cytogenetic and molecular response, with less progression to advanced forms of disease in comparison with imatinib. Several investigational agents specific for those patients with the T315I mutation remain under evaluation. The future of CML therapy may include early use of these potent agents to help more patients achieve molecular remission and potentially be a path to a CML cure. PMID:22035738

  6. The new 2nd-generation laser station at Santiago de Cuba

    NASA Astrophysics Data System (ADS)

    Masevich, A. G.; Chepurnov, B. D.; Fundora, M.; del Pino, J.; Kautzleben, H.

    The new laser-radar station at Santiago de Cuba was equipped in cooperation between the Academies of Sciences of the USSR, Cuba and the G.D.R. The system is based on a modified satellite-tracking camera (SBG). Its basic concept and the technical performance are similar to the laser-radar station of the Central Institute for Physics of the Earth, Potsdam. During a first 6-weeks-observation campaign (Dec. 1985 - Jan. 1986), 70 satellite passes (including 40 passes of the geodynamical satellite LAGEOS) were obtained.

  7. Validation of the 2nd Generation Proteasome Inhibitor Oprozomib for Local Therapy of Pulmonary Fibrosis.

    PubMed

    Semren, Nora; Habel-Ungewitter, Nunja C; Fernandez, Isis E; Königshoff, Melanie; Eickelberg, Oliver; Stöger, Tobias; Meiners, Silke

    2015-01-01

    Proteasome inhibition has been shown to prevent development of fibrosis in several organs including the lung. However, effects of proteasome inhibitors on lung fibrosis are controversial and cytotoxic side effects of the overall inhibition of proteasomal protein degradation cannot be excluded. Therefore, we hypothesized that local lung-specific application of a novel, selective proteasome inhibitor, oprozomib (OZ), provides antifibrotic effects without systemic toxicity in a mouse model of lung fibrosis. Oprozomib was first tested on the human alveolar epithelial cancer cell line A549 and in primary mouse alveolar epithelial type II cells regarding its cytotoxic effects on alveolar epithelial cells and compared to the FDA approved proteasome inhibitor bortezomib (BZ). OZ was less toxic than BZ and provided high selectivity for the chymotrypsin-like active site of the proteasome. In primary mouse lung fibroblasts, OZ showed significant anti-fibrotic effects, i.e. reduction of collagen I and α smooth muscle actin expression, in the absence of cytotoxicity. When applied locally into the lungs of healthy mice via instillation, OZ was well tolerated and effectively reduced proteasome activity in the lungs. In bleomycin challenged mice, however, locally applied OZ resulted in accelerated weight loss and increased mortality of treated mice. Further, OZ failed to reduce fibrosis in these mice. While upon systemic application OZ was well tolerated in healthy mice, it rather augmented instead of attenuated fibrotic remodelling of the lung in bleomycin challenged mice. To conclude, low toxicity and antifibrotic effects of OZ in pulmonary fibroblasts could not be confirmed for pulmonary fibrosis of bleomycin-treated mice. In light of these data, the use of proteasome inhibitors as therapeutic agents for the treatment of fibrotic lung diseases should thus be considered with caution. PMID:26340365

  8. Validation of the 2nd Generation Proteasome Inhibitor Oprozomib for Local Therapy of Pulmonary Fibrosis

    PubMed Central

    Semren, Nora; Habel-Ungewitter, Nunja C.; Fernandez, Isis E.; Königshoff, Melanie; Eickelberg, Oliver; Stöger, Tobias; Meiners, Silke

    2015-01-01

    Proteasome inhibition has been shown to prevent development of fibrosis in several organs including the lung. However, effects of proteasome inhibitors on lung fibrosis are controversial and cytotoxic side effects of the overall inhibition of proteasomal protein degradation cannot be excluded. Therefore, we hypothesized that local lung-specific application of a novel, selective proteasome inhibitor, oprozomib (OZ), provides antifibrotic effects without systemic toxicity in a mouse model of lung fibrosis. Oprozomib was first tested on the human alveolar epithelial cancer cell line A549 and in primary mouse alveolar epithelial type II cells regarding its cytotoxic effects on alveolar epithelial cells and compared to the FDA approved proteasome inhibitor bortezomib (BZ). OZ was less toxic than BZ and provided high selectivity for the chymotrypsin-like active site of the proteasome. In primary mouse lung fibroblasts, OZ showed significant anti-fibrotic effects, i.e. reduction of collagen I and α smooth muscle actin expression, in the absence of cytotoxicity. When applied locally into the lungs of healthy mice via instillation, OZ was well tolerated and effectively reduced proteasome activity in the lungs. In bleomycin challenged mice, however, locally applied OZ resulted in accelerated weight loss and increased mortality of treated mice. Further, OZ failed to reduce fibrosis in these mice. While upon systemic application OZ was well tolerated in healthy mice, it rather augmented instead of attenuated fibrotic remodelling of the lung in bleomycin challenged mice. To conclude, low toxicity and antifibrotic effects of OZ in pulmonary fibroblasts could not be confirmed for pulmonary fibrosis of bleomycin-treated mice. In light of these data, the use of proteasome inhibitors as therapeutic agents for the treatment of fibrotic lung diseases should thus be considered with caution. PMID:26340365

  9. Neurobehavioral Evaluation System (NES): comparative performance of 2nd-, 4th-, and 8th-grade Czech children.

    PubMed

    Otto, D A; Skalik, I; House, D E; Hudnell, H K

    1996-01-01

    The Neurobehavioral Evaluation System was designed for field studies of workers, but many NES tests can be performed satisfactorily by children as young as 7 or 8 years old and a few tests, such as simple reaction time, can be performed by preschool children. However, little comparative data from children of different ages or grade levels are available. Studies of school children in the Czech Republic indicate that 2nd-grade children could perform the following NES tests satisfactorily: Finger Tapping, Visual Digit Span. Continuous Performance, Symbol-Digit Substitution, Pattern Comparison, and simpler conditions of Switching Attention. Comparative scores of boys and girls from the 2nd, 4th, and 8th grades and power analyses to estimate appropriate sample size were presented. Performance varied systematically with grade level and gender. Larger samples were needed with younger children to achieve comparable levels of statistical power. Gender comparisons indicated that boys responded faster, but made more errors than girls. PMID:8866533

  10. Immobilized High Level Waste (HLW) Interim Storage Alternative Generation and analysis and Decision Report 2nd Generation Implementing Architecture

    SciTech Connect

    CALMUS, R.B.

    2000-09-14

    Two alternative approaches were previously identified to provide second-generation interim storage of Immobilized High-Level Waste (IHLW). One approach was retrofit modification of the Fuel and Materials Examination Facility (FMEF) to accommodate IHLW. The results of the evaluation of the FMEF as the second-generation IHLW interim storage facility and subsequent decision process are provided in this document.

  11. Performance Evaluation of Electrochem's PEM Fuel Cell Power Plant for NASA's 2nd Generation Reusable Launch Vehicle

    NASA Technical Reports Server (NTRS)

    Kimble, Michael C.; Hoberecht, Mark

    2003-01-01

    NASA's Next Generation Launch Technology (NGLT) program is being developed to meet national needs for civil and commercial space access with goals of reducing the launch costs, increasing the reliability, and reducing the maintenance and operating costs. To this end, NASA is considering an all- electric capability for NGLT vehicles requiring advanced electrical power generation technology at a nominal 20 kW level with peak power capabilities six times the nominal power. The proton exchange membrane (PEM) fuel cell has been identified as a viable candidate to supply this electrical power; however, several technology aspects need to be assessed. Electrochem, Inc., under contract to NASA, has developed a breadboard power generator to address these technical issues with the goal of maximizing the system reliability while minimizing the cost and system complexity. This breadboard generator operates with dry hydrogen and oxygen gas using eductors to recirculate the gases eliminating gas humidification and blowers from the system. Except for a coolant pump, the system design incorporates passive components allowing the fuel cell to readily follow a duty cycle profile and that may operate at high 6:1 peak power levels for 30 second durations. Performance data of the fuel cell stack along with system performance is presented to highlight the benefits of the fuel cell stack design and system design for NGLT vehicles.

  12. Phase Relations of the CaO-SiO2-Nd2O3 System and the Implication for Rare Earths Recycling

    NASA Astrophysics Data System (ADS)

    Le, Thu Hoai; Malfliet, Annelies; Blanpain, Bart; Guo, Muxing

    2016-03-01

    CaO-SiO2-Nd2O3 slags were equilibrated at 1773 K and 1873 K (1500 °C and 1600 °C) for 24 hours in Ar, and quenched in water to determine the operative phase relations. The composition and crystallinity of the phases in equilibrium were determined by EPMA-WDS and EBSD, respectively. Based on these analyses, the liquid stability region was accurately determined, and a large part of the isothermal section of the phase diagram was constructed. Data resulting from this work can be used to generate a thermodynamic database for rare-earth oxide-containing systems and to support further investigation on separation of rare earths from metallurgical slags or other residues through high-temperature processing.

  13. Phase Relations of the CaO-SiO2-Nd2O3 System and the Implication for Rare Earths Recycling

    NASA Astrophysics Data System (ADS)

    Le, Thu Hoai; Malfliet, Annelies; Blanpain, Bart; Guo, Muxing

    2016-06-01

    CaO-SiO2-Nd2O3 slags were equilibrated at 1773 K and 1873 K (1500 °C and 1600 °C) for 24 hours in Ar, and quenched in water to determine the operative phase relations. The composition and crystallinity of the phases in equilibrium were determined by EPMA-WDS and EBSD, respectively. Based on these analyses, the liquid stability region was accurately determined, and a large part of the isothermal section of the phase diagram was constructed. Data resulting from this work can be used to generate a thermodynamic database for rare-earth oxide-containing systems and to support further investigation on separation of rare earths from metallurgical slags or other residues through high-temperature processing.

  14. Digital avionics systems - Principles and practices (2nd revised and enlarged edition)

    NASA Technical Reports Server (NTRS)

    Spitzer, Cary R.

    1993-01-01

    The state of the art in digital avionics systems is surveyed. The general topics addressed include: establishing avionics system requirements; avionics systems essentials in data bases, crew interfaces, and power; fault tolerance, maintainability, and reliability; architectures; packaging and fitting the system into the aircraft; hardware assessment and validation; software design, assessment, and validation; determining the costs of avionics.

  15. Systems and Procedures of Certification of Qualifications in Luxembourg. National Report. 2nd Edition. CEDEFOP Panorama.

    ERIC Educational Resources Information Center

    Frideres-Poos, Jose; Tagliaferri, Jean

    This report describes systems and procedures for the certification of qualifications and skills in Luxembourg. All areas of education and the various levels of training are covered. An introduction offers an overview of the characteristics of the Luxembourg education system, including funding and structure. Section 2 describes systems of training…

  16. Efficient 2(nd) and 4(th) harmonic generation of a single-frequency, continuous-wave fiber amplifier.

    PubMed

    Sudmeyer, Thomas; Imai, Yutaka; Masuda, Hisashi; Eguchi, Naoya; Saito, Masaki; Kubota, Shigeo

    2008-02-01

    We demonstrate efficient cavity-enhanced second and fourth harmonic generation of an air-cooled, continuous-wave (cw), single-frequency 1064 nm fiber-amplifier system. The second harmonic generator achieves up to 88% total external conversion efficiency, generating more than 20-W power at 532 nm wavelength in a diffraction-limited beam (M(2) < 1.05). The nonlinear medium is a critically phase-matched, 20-mm long, anti-reflection (AR) coated LBO crystal operated at 25 degrees C. The fourth harmonic generator is based on an AR-coated, Czochralski-grown beta-BaB(2)O(4) (BBO) crystal optimized for low loss and high damage threshold. Up to 12.2 W of 266-nm deep-UV (DUV) output is obtained using a 6-mm long critically phase-matched BBO operated at 40 degrees C. This power level is more than two times higher than previously reported for cw 266-nm generation. The total external conversion efficiency from the fundamental at 1064 nm to the fourth harmonic at 266 nm is >50%. PMID:18542230

  17. The 2nd Conference on Remotely Manned Systems (RMS): Technology and Applications

    NASA Technical Reports Server (NTRS)

    1975-01-01

    Control theory and the design of manipulators, teleoperators, and robots are considered. Applications of remotely manned vehicles to space maintenance and orbital assembly, industry and productivity, undersea operations, and rehabilitation systems are emphasized.

  18. 2nd annual conference on health monitoring for space propulsion systems

    SciTech Connect

    Paxson, D.E.

    1990-01-01

    A simple static model is presented which solves for the flow properties of pressure, temperature, and mass flow in the Space Shuttle Main Engine pressure Oxidizer Turbopump Shaft Seal Systems. This system includes the primary and secondary turbine seals, the primary and secondary turbine drains, the helium purge seals and feed line, the primary oxygen drain, and the slinger/labyrinth oxygen seal pair. The model predicts the changes in flow variables that occur during and after failures of the various seals. Such information would be particularly useful in a post flight situation where processing of sensor information using this model could identify a particular seal that had experienced excessive wear. Most of the seals in the system are modeled using simple one dimensional equations which can be applied to almost any seal provided that the fluid is gaseous. A failure is modeled as an increase in the clearance between the shaft and the seal. Thus, the model does not attempt to predict how the failure process actually occurs (e.g., wear, seal crack initiation). The results presented were obtained using a FORTRAN implementation of the model running on a VAX computer. Solution for the seal system properties is obtained iteratively; however, a further simplified implementation (which does not include the slinger/labyrinth combination) was also developed which provides fast and reasonable results for most engine operating conditions. Results from the model compare favorably with the limited redline data available.

  19. General Guide for Community College System Physical Planning. 2nd Printing.

    ERIC Educational Resources Information Center

    Mogi, Hitoshi

    Part I describes a general outline for producing long range development plans for the Hawaii Community College System. Long-range planning is defined and discussed in terms of basic elements of academic requirements, quality of campus, space requirements, environmental factors, administrative factors, and adjustment factors of the general plans.…

  20. FBG application in bridge health monitoring system of Wuhan Yangtze River 2nd Bridge

    NASA Astrophysics Data System (ADS)

    Liu, Jun

    2009-10-01

    For the traditional resistance strain sensor's shortage,for example,their stability,durability and monitoring scorpe could not satisfied the requirement of bridge monitoring system,put forward to adopt advanced fiber-optic bragg grating sensor and its technology to build up the bridge health monitoring system.Analysed the application scope and aim of difference kinds of fiber bragg grating sensors used, including stress strain sensors,temperature sensors,crack sensors and testing force ring sensors.According to the key construction sections as the project designed,expatiated their specific installation methods and construction craftwork in Wuhan Yangtze River 2th bridge.It formed distributed fiber sensing network of bridge with large-scale located fiber-optic bragg grating sensors, and pointed out the becareful prodeeding when to link no more than twenty sensors to one fiber for the demodulator precision.Discussed how to construct the data acquisition system and its function via the sensors and their demodulator.One fiber of the linked sensors connected to one channel of the demodulator and all together reached sixteen channels.The demodulator were connected to the switch through rj45 interface and communicated with the acquisition server.Designed the software program of data acquisition software system and the database,which used the Sqlite of the embed database to storage the configure information and receive the data through the TCP/IP protocol.It has been build a bridge health monitoring system base on fiber bragg grating technology.

  1. Proceedings of the 2nd Annual Workshop on Meteorological and Environmental Inputs to Aviation Systems

    NASA Technical Reports Server (NTRS)

    Frost, W. (Editor); Camp, D. W. (Editor); Durham, D. E. (Editor)

    1978-01-01

    The proceedings of a workshop held at the University of Tennessee Space Institute, Tullahoma, Tennessee, March 28-30, 1978, are reported. The workshop was jointly sponsored by NASA, NOAA, FAA, and brought together many disciplines of the aviation communities in round table discussions. The major objectives of the workshop are to satisfy such needs of the sponsoring agencies as the expansion of our understanding and knowledge of the interactions of the atmosphere with aviation systems, as the better definition and implementation of services to operators, and as the collection and interpretation of data for establishing operational criteria, relating the total meteorological inputs from the atmospheric sciences to the needs of aviation communities.

  2. 2nd International Conference on Pathways, Networks, and Systems: Theory and Experiments

    SciTech Connect

    Aegean Conferences

    2004-10-01

    With the availability of whole genome sequences, research attention shifts from gene sequences and genome content to protein functions and systems biology. Genes comprise a major component of the ''parts list'' that is required for building and maintaining of living organisms. Genome DNA sequences reveal the genetic inventory for a rapidly increasing number of species. Defining and interpreting the instruction manual for protein functions, individually and collectively, is the emerging challenge. Defining protein functions is a complex problem because each gene typically encodes several distinct proteins. As a result, the protein inventory includes as many as 100,000 distinct proteins. Protein functions can vary with developmental stage, anatomical location, and environmental context. Like the problem of sequencing the human genome, the multidimensional nature of protein functions in time, space and context constitutes one of the ''big'' problems in biomedical research. Resolving this problem is key to revolutionizing health care where a deep understanding of complex biological systems will lead to more powerful and specific ways to treat, and perhaps, even prevent birth defects and adult diseases. The meeting addressed the above issues.

  3. Autocommander: A Supervisory Controller for Integrated Guidance and Control for the 2nd Generation Reusable Launch Vehicle

    NASA Technical Reports Server (NTRS)

    Fisher, J. E.; Lawrence, D. A.; Zhu, J. J.; Jackson, Scott (Technical Monitor)

    2002-01-01

    This paper presents a hierarchical architecture for integrated guidance and control that achieves risk and cost reduction for NASA's 2d generation reusable launch vehicle (RLV). Guidance, attitude control, and control allocation subsystems that heretofore operated independently will now work cooperatively under the coordination of a top-level autocommander. In addition to delivering improved performance from a flight mechanics perspective, the autocommander is intended to provide an autonomous supervisory control capability for traditional mission management under nominal conditions, G&C reconfiguration in response to effector saturation, and abort mode decision-making upon vehicle malfunction. This high-level functionality is to be implemented through the development of a relational database that is populated with the broad range of vehicle and mission specific data and translated into a discrete event system model for analysis, simulation, and onboard implementation. A Stateflow Autocoder software tool that translates the database into the Stateflow component of a Matlab/Simulink simulation is also presented.

  4. [Modalities of use of ceritinib (Zykadia™), a 2nd generation ALK inhibitor, in advanced stage non-small cell lung cancer].

    PubMed

    Giroux Leprieur, Etienne; Fallet, Vincent; Wislez, Marie

    2015-12-01

    Around 4% of advanced non-small cell lung cancers (NSCLC) harbor a ALK rearrangement, with high sensitivity to ALK inhibitor as crizotinib. However, the vast majority of these tumors end with a tumor progression after several months of treatment with crizotinib. Ceritinib is a 2nd generation ALK inhibitor, which showed high efficiency in NSCLC with ALK rearrangement. Results from phase I trial showed a response rate at 58% in these tumors, with a similar rate for previously crizotinib-treated patients or crizotinib-naïve patients. Moreover, cerebral responses were observed with ceritinib. Preliminary date from a phase 2 trial confirmed these results. These promising results allowed a European marketing authorization (autorisation de mise sur le marché [AMM]) since May 2015 for the treatment of advanced NSCLC with ALK rearrangement and resistance or intolerance to crizotinib. PMID:26597476

  5. Contribution of ion beam analysis methods to the development of 2nd generation high temperature superconducting (HTS) wires

    SciTech Connect

    Usov, Igor O; Arendt, Paul N; Stan, Liliana; Holesinger, Terry G; Foltyn, Steven R; Depaula, Raymond F

    2009-01-01

    One of the crucial steps in the second generation high temperature superconducting wire program was development of the buffer layer architecture. The architecture designed at the Superconductivity Technology Center at Los Alamos National Laboratory consists of several oxide layers wherein each layer plays a specific role, namely: nucleation layer, diffusion barrier, biaxially textured template, and an intermediate layer with a good match to the lattice parameter of superconducting Y{sub 1}Ba{sub 2}Cu{sub 3}O{sub 7} (YBCO) compound. This report demonstrates how a wide range of ion beam analysis techniques (SIMS, RBS, channeling, PIXE, PIGE, NRA, ERD) was employed for analysis of each buffer layer and the YBCO films. These results assisted in understanding of a variety of physical processes occurring during the buffet layer fabrication and helped to optimize the buffer layer architecture as a whole.

  6. Study of recovery characteristics of 2nd generation HTS tapes with different stabilizers for resistive type superconducting fault current limiters

    NASA Astrophysics Data System (ADS)

    Sheng, Jie; Zeng, Weina; Ma, Jun; Yao, Zhihao; Li, Zhuyong; Jin, Zhijian; Hong, Zhiyong

    2016-02-01

    The resistive type superconducting fault current limiter (SFCL) is one of the most important superconducting power applications nowadays. As known, this type of SFCL is settled directly in the power transmission line. When a short fault happens, the temperature of the superconductors in the SFCL will increase sharply due to the huge generated heat. This means the superconductors need time to recover the superconducting properties and be ready for the next short fault. So the recovery characteristics become one of the most crucial features of the resistive type SFCL. In this paper, several different kinds of measuring methods are presented to calculate the recovery time of the HTS tapes, and comparison of these methods is also carried out by a standard test. On basis of this, samples with different kinds of stabilizers are used to explore the influence of stabilizer on their recovery characteristics. In addition, the influence of the encapsulation technology is also discussed in this paper.

  7. Explaining the Success of High-Achieving 2nd-Generation Latino Students at Elite Colleges and Universities

    ERIC Educational Resources Information Center

    Kula, Stacy M.

    2013-01-01

    Latinos represent the largest minority population in the US, yet are one of the most underserved groups in the educational system. As such, they have been the focus of much attention by educational researchers. However, there is little work enabling researchers to understand how many factors might interactively support achievement. Moreover, the…

  8. Comparison of Five 2nd-Generation Supraglottic Airway Devices for Airway Management Performed by Novice Military Operators

    PubMed Central

    Henlin, Tomas; Sotak, Michal; Kovaricek, Petr; Tyll, Tomas; Balcarek, Lukas; Michalek, Pavel

    2015-01-01

    Objectives. Five different second-generation supraglottic airway devices, ProSeal LMA, Supreme LMA, i-gel, SLIPA, and Laryngeal Tube Suction-D, were studied. Operators were inexperienced users with a military background, combat lifesavers, nurses, and physicians. Methods. This was a prospective, randomized, single-blinded study. Devices were inserted in the operating room in low light conditions after induction of general anesthesia. Primary outcome was successful insertion on the first attempt while secondary aims were insertion time, number of attempts, oropharyngeal seal pressure, ease of insertion, fibre optic position of device, efficacy of ventilation, and intraoperative trauma or regurgitation of gastric contents. Results. In total, 505 patients were studied. First-attempt insertion success rate was higher in the Supreme LMA (96%), i-gel (87.9%), and ProSeal LMA (85.9%) groups than in the Laryngeal Tube Suction-D (80.6%) and SLIPA (69.4%) groups. Insertion time was shortest in the Supreme LMA (70.4 ± 32.5 s) and i-gel (74.4 ± 41.1 s) groups (p < 0.001). Oropharyngeal seal pressures were higher in the Laryngeal Tube Suction-D and ProSeal LMA groups than in other three devices. Conclusions. Most study parameters for the Supreme LMA and i-gel were found to be superior to the other three tested supraglottic airway devices when inserted by novice military operators. PMID:26495289

  9. New approaches for improving the production of the 1st and 2nd generation ethanol by yeast.

    PubMed

    Kurylenko, Olena; Semkiv, Marta; Ruchala, Justyna; Hryniv, Orest; Kshanovska, Barbara; Abbas, Charles; Dmytruk, Kostyantyn; Sibirny, Andriy

    2016-01-01

    Increase in the production of 1st generation ethanol from glucose is possible by the reduction in the production of ethanol co-products, especially biomass. We have developed a method to reduce biomass accumulation of Saccharomyces cerevisiae by the manipulation of the intracellular ATP level due to overexpression of genes of alkaline phosphatase, apyrase or enzymes involved in futile cycles. The strains constructed accumulated up to 10% more ethanol on a cornmeal hydrolysate medium. Similar increase in ethanol accumulation was observed in the mutants resistant to the toxic inhibitors of glycolysis like 3-bromopyruvate and others. Substantial increase in fuel ethanol production will be obtained by the development of new strains of yeasts that ferment sugars of the abundant lignocellulosic feedstocks, especially xylose, a pentose sugar. We have found that xylose can be fermented under elevated temperatures by the thermotolerant yeast, Hansenula polymorpha. We combined protein engineering of the gene coding for xylose reductase (XYL1) along with overexpression of the other two genes responsible for xylose metabolism in yeast (XYL2, XYL3) and the deletion of the global transcriptional activator CAT8, with the selection of mutants defective in utilizing ethanol as a carbon source using the anticancer drug, 3-bromopyruvate. Resulted strains accumulated 20-25 times more ethanol from xylose at the elevated temperature of 45°C with up to 12.5 g L(-1) produced. Increase in ethanol yield and productivity from xylose was also achieved by overexpression of genes coding for the peroxisomal enzymes: transketolase (DAS1) and transaldolase (TAL2), and deletion of the ATG13 gene. PMID:26619255

  10. Optical coherence tomography analysis of the stent strut and prediction of resolved strut malapposition at 3 months after 2nd-generation drug-eluting stent implantation.

    PubMed

    Izumi, Daisuke; Miyahara, Masatoshi; Fujimoto, Naoki; Fukuoka, Shusuke; Sakai, Masataka; Dohi, Kaoru; Ito, Masaaki

    2016-08-01

    Our objective was to clarify whether thrombogenic problems with stent struts are resolved at 3 months after 2nd-generation drug-eluting stent implantation. Twenty-one patients with stable angina pectoris having 28 (22 zotarolimus-eluting, 6 everolimus-eluting) stents with optical coherence tomography (OCT)-guided percutaneous coronary intervention (PCI) were evaluated. Stent strut coverage and malapposition were evaluated by OCT immediately after PCI and at 3-month follow-up. Acute strut malapposition was observed in 26 out of 28 analyzed stents (92.9 %). At 3-month follow-up, 7 (26.9 %) of those 26 stents with strut malapposition were completely resolved, and the mean percentages of uncovered struts and malapposed struts were 8.3 and 2.0 % when analyzed by each individual stent. When analyzing a total of 30,060 struts, 807 struts (2.7 %) demonstrated acute strut malapposition. Among these, 219 struts (27.1 %) demonstrated persistent strut malapposition. On the basis of receiver-operating characteristic curve analysis, a strut-to-vessel (S-V) distance ≤160 µm on post-stenting OCT images was the corresponding cutoff point for resolved malapposed struts (sensitivity 78.1 %, specificity 62.8 %, area under the curve 0.758). The S-V distance of persistent malapposed struts on post-stenting OCT images was longer than that of resolved malapposed struts (235 ± 112 vs. 176 ± 93 µm, p < 0.01). At 3 months after PCI, the prevalence rates of uncovered and malapposed struts were relatively low in 2nd-generation drug-eluting stent. Our results suggest that OCT-guide PCI with an S-V distance ≤160 µm may be recommended especially in patients with planed short-term DAPT. PMID:26334709

  11. New efficient artemisinin derived agents against human leukemia cells, human cytomegalovirus and Plasmodium falciparum: 2nd generation 1,2,4-trioxane-ferrocene hybrids.

    PubMed

    Reiter, Christoph; Fröhlich, Tony; Zeino, Maen; Marschall, Manfred; Bahsi, Hanife; Leidenberger, Maria; Friedrich, Oliver; Kappes, Barbara; Hampel, Frank; Efferth, Thomas; Tsogoeva, Svetlana B

    2015-06-01

    In our ongoing search for highly active hybrid molecules exceeding their parent compounds in anticancer, antimalaria as well as antiviral activity and being an alternative to the standard drugs, we present the synthesis and biological investigations of 2nd generation 1,2,4-trioxane-ferrocene hybrids. In vitro tests against the CCRF-CEM leukemia cell line revealed di-1,2,4-trioxane-ferrocene hybrid 7 as the most active compound (IC50 of 0.01 μM). Regarding the activity against the multidrug resistant subline CEM/ADR5000, 1,2,4-trioxane-ferrocene hybrid 5 showed a remarkable activity (IC50 of 0.53 μM). Contrary to the antimalaria activity of hybrids 4-8 against Plasmodium falciparum 3D7 strain with slightly higher IC50 values (between 7.2 and 30.2 nM) than that of their parent compound DHA, hybrids 5-7 possessed very promising activity (IC50 values lower than 0.5 μM) against human cytomegalovirus (HCMV). The application of 1,2,4-trioxane-ferrocene hybrids against HCMV is unprecedented and demonstrated here for the first time. PMID:25965779

  12. Direct and non-destructive proof of authenticity for the 2nd generation of Brazilian real banknotes via easy ambient sonic spray ionization mass spectrometry.

    PubMed

    Schmidt, Eduardo Morgado; Franco, Marcos Fernando; Regino, Karen Gomes; Lehmann, Eraldo Luiz; Arruda, Marco Aurélio Zezzi; de Carvalho Rocha, Werickson Fortunato; Borges, Rodrigo; de Souza, Wanderley; Eberlin, Marcos Nogueira; Correa, Deleon Nascimento

    2014-12-01

    Using a desorption/ionization technique, easy ambient sonic-spray ionization coupled to mass spectrometry (EASI-MS), documents related to the 2nd generation of Brazilian Real currency (R$) were screened in the positive ion mode for authenticity based on chemical profiles obtained directly from the banknote surface. Characteristic profiles were observed for authentic, seized suspect counterfeit and counterfeited homemade banknotes from inkjet and laserjet printers. The chemicals in the authentic banknotes' surface were detected via a few minor sets of ions, namely from the plasticizers bis(2-ethylhexyl)phthalate (DEHP) and dibutyl phthalate (DBP), most likely related to the official offset printing process, and other common quaternary ammonium cations, presenting a similar chemical profile to 1st-generation R$. The seized suspect counterfeit banknotes, however, displayed abundant diagnostic ions in the m/z 400-800 range due to the presence of oligomers. High-accuracy FT-ICR MS analysis enabled molecular formula assignment for each ion. The ions were separated by 44 m/z, which enabled their characterization as Surfynol® 4XX (S4XX, XX=40, 65, and 85), wherein increasing XX values indicate increasing amounts of ethoxylation on a backbone of 2,4,7,9-tetramethyl-5-decyne-4,7-diol (Surfynol® 104). Sodiated triethylene glycol monobutyl ether (TBG) of m/z 229 (C10H22O4Na) was also identified in the seized counterfeit banknotes via EASI(+) FT-ICR MS. Surfynol® and TBG are constituents of inks used for inkjet printing. PMID:25498934

  13. Early onset hypercholesterolemia induced by the 2nd-generation tyrosine kinase inhibitor nilotinib in patients with chronic phase-chronic myeloid leukemia

    PubMed Central

    Rea, Delphine; Mirault, Tristan; Cluzeau, Thomas; Gautier, Jean-François; Guilhot, François; Dombret, Hervé; Messas, Emmanuel

    2014-01-01

    Despite a well-recognized clinical benefit of the 2nd-generation tyrosine kinase inhibitor nilotinib in patients with imatinib-resistant/-intolerant or newly diagnosed chronic myeloid leukemia, recent evidence suggests that nilotinib has a propensity to increase the risk of occlusive arterial events, especially in patients with pre-existing cardiovascular risk factors. Given the key role of lipids in cardiovascular diseases, we studied the plasma lipid profile and global cardiovascular risk prior to and during nilotinib therapy in a series of 27 patients in the setting of a prospective single center study. Data from a minimum 1-year follow up showed that nilotinib significantly increased total, low- and high-density lipoprotein cholesterol within three months. Consequently, the proportion of patients with non-optimal low-density lipoprotein cholesterol increased from 48.1% to 88.9% by 12 months, leading to cholesterol-lowering drug intervention in 22.2% of patients. The proportion of patients with low levels of high-density lipoprotein cholesterol decreased from 40.7% to 7.4% by 12 months. In contrast, a significant decrease in triglycerides was observed. Global cardiovascular risk worsened in 11.1% of patients due to diabetes or occlusive arterial events. Whether hypercholesterolemia was the main driver of occlusive arterial events was uncertain: a longer follow up is necessary to ask whether nilotinib-induced hypercholesterolemia increases long-term risk of atherosclerotic diseases. Nevertheless, given key atherogenic properties of low-density lipoprotein cholesterol, we conclude that when prescribing nilotinib, commitment to detect lipid disorders at baseline and during follow up is mandatory given their frequency, requirement for changes in lifestyle or drug intervention, and potential for long-term cardiovascular complications. PMID:24658819

  14. Enhanced animal productivity and health with improved manure management in 2nd Generation Environmentally Superior Technology in North Carolina: II. Air quality

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The aim of this study was to evaluate the effects of improved manure management on air quality and the beneficial effect of a cleaner environment on animal productivity and health using a second generation of Environmentally Superior Technology. The second generation system combines solid-liquid sep...

  15. Gasification. 2nd. ed.

    SciTech Connect

    Christopher Higman; Maarten van der Burgt

    2008-02-15

    This book covers gasification as a comprehensive topic, covering its many uses, from refining, to natural gas, to coal. It provides an overview of commercial processes and covers applications relevant to today's demands. The new edition is expanded and provides more detail on the integration issues for current generation, state-of-the-art Integrated Gasification Combined Cycles (IGCC); CO{sub 2} capture in the IGCC context addressing the issues of pre-investment and retrofitting as well as defining what the term 'CO{sub 2} capture ready' might mean in practice; issues of plant reliability, availability and maintainability (RAM) including as evaluation of feedback from existing plants; implementation of fuel cell technology in IGCC concepts. Contents are: Introduction; The Thermodynamics of Gasification; The Kinetics of Gasification and Reactor Theory; Feedstocks and Feedstock Characteristics; Gasification Processes; Practical Issues; Applications; Auxiliary Technologies; Economics, environmental, and Safety Issues; Gasification and the Future. 5 apps.

  16. Exogenous attention enhances 2nd-order contrast sensitivity.

    PubMed

    Barbot, Antoine; Landy, Michael S; Carrasco, Marisa

    2011-05-11

    Natural scenes contain a rich variety of contours that the visual system extracts to segregate the retinal image into perceptually coherent regions. Covert spatial attention helps extract contours by enhancing contrast sensitivity for 1st-order, luminance-defined patterns at attended locations, while reducing sensitivity at unattended locations, relative to neutral attention allocation. However, humans are also sensitive to 2nd-order patterns such as spatial variations of texture, which are predominant in natural scenes and cannot be detected by linear mechanisms. We assess whether and how exogenous attention--the involuntary and transient capture of spatial attention--affects the contrast sensitivity of channels sensitive to 2nd-order, texture-defined patterns. Using 2nd-order, texture-defined stimuli, we demonstrate that exogenous attention increases 2nd-order contrast sensitivity at the attended location, while decreasing it at unattended locations, relative to a neutral condition. By manipulating both 1st- and 2nd-order spatial frequency, we find that the effects of attention depend both on 2nd-order spatial frequency of the stimulus and the observer's 2nd-order spatial resolution at the target location. At parafoveal locations, attention enhances 2nd-order contrast sensitivity to high, but not to low 2nd-order spatial frequencies; at peripheral locations attention also enhances sensitivity to low 2nd-order spatial frequencies. Control experiments rule out the possibility that these effects might be due to an increase in contrast sensitivity at the 1st-order stage of visual processing. Thus, exogenous attention affects 2nd-order contrast sensitivity at both attended and unattended locations. PMID:21356228

  17. Exogenous attention enhances 2nd-order contrast sensitivity

    PubMed Central

    Barbot, Antoine; Landy, Michael S.; Carrasco, Marisa

    2011-01-01

    Natural scenes contain a rich variety of contours that the visual system extracts to segregrate the retinal image into perceptually coherent regions. Covert spatial attention helps extract contours by enhancing contrast sensitivity for 1st-order, luminance-defined patterns at attended locations, while reducing sensitivity at unattended locations, relative to neutral attention allocation. However, humans are also sensitive to 2nd-order patterns such as spatial variations of texture, which are predominant in natural scenes and cannot be detected by linear mechanisms. We assess whether and how exogenous attention—the involuntary and transient capture of spatial attention—affects the contrast sensitivity of channels sensitive to 2nd-order, texture-defined patterns. Using 2nd-order, texture-defined stimuli, we demonstrate that exogenous attention increases 2nd-order contrast sensitivity at the attended location, while decreasing it at unattended locations, relative to a neutral condition. By manipulating both 1st- and 2nd-order spatial frequency, we find that the effects of attention depend both on 2nd-order spatial frequency of the stimulus and the observer’s 2nd-order spatial resolution at the target location. At parafoveal locations, attention enhances 2nd-order contrast sensitivity to high, but not to low 2nd-order spatial frequencies; at peripheral locations attention also enhances sensitivity to low 2nd-order spatial frequencies. Control experiments rule out the possibility that these effects might be due to an increase in contrast sensitivity at the 1st-order stage of visual processing. Thus, exogenous attention affects 2nd-order contrast sensitivity at both attended and unattended locations. PMID:21356228

  18. Universe (2nd edition)

    SciTech Connect

    Kaufmann, W.J. III

    1988-01-01

    A general text on astronomy is presented. The foundations of the science are reviewed, including descriptions of naked-eye observatons of eclipses and planetary motions and such basic tools as Kepler's laws, the fundamental properties of light, and the optics of telescopes. The formation of the solar system is addressed, and the planets and their satellites are discussed individually. Solar science is treated in detail. Stellar evolution is described chronologically from birth to death. Molecular clouds, star clusters, nebulae, neutron stars, black holes, and various other phenomena that occur in the life of a star are examined in the sequence in which they naturally occur. A survey of the Milky Way introduces galactic astronomy. Quasars and cosmology are addressed, including the most recent developments in research. 156 references.

  19. Test Review: Naglieri, J. A., Das, J. P., & Goldstein, S. (2014). Cognitive Assessment System-Second Edition (2nd Ed.)

    ERIC Educational Resources Information Center

    McGill, Ryan J.

    2015-01-01

    The Cognitive Assessment System-Second Edition (CAS2) is an individually administered measure of cognitive ability designed for children and adolescents ages 5 through 18 years. The measure, authored by Jack A. Naglieri, J. P. Das, and Sam Goldstein, was published by Pro-Ed in 2014 and is the first revision of the Cognitive Assessment System (CAS;…

  20. Proceedings of Seminar on UDC and Mechanized Information Systems (2nd, Frankfurt, 1st-5th June 1970).

    ERIC Educational Resources Information Center

    Molgaard-Hansen, R., Ed.; Westring-Nielsen, Margit, Ed.

    The 20 papers included in this report are arranged in five parts: (1) Opening addresses, (2) Universal Decimal Classification (UDC) in computer-prepared catalogues, (3) UDC in SDI/IR systems and compatability with thesauri, (4) UDC in future information systems and networks and (5) seminar organization. English abstracts are provided for those…

  1. Annual Health Monitoring Conference for Space Propulsion Systems, 2nd, Cincinnati, OH, Nov. 14, 15, 1990, Proceedings

    NASA Technical Reports Server (NTRS)

    1990-01-01

    This conference discusses health management systems for liquid rocket engines, signal processing of spectroscopic data for engine diagnostic applications, real-time diagnostics of the reusable rocket engine using on-line system identification, and nonlinear parameter estimation for rocket engine health monitoring. Plume diagnostics are considered including discussion on preliminary plume diagnostics on the SSME using video digitization techniques and baseline plume emmissions. The development of a Fabry-Perot Interferometer for rocket engine plumes is also considered. The topic of computational modeling is also discussed, addressing such topics as probabalistic dynamics of material loss in the SSME turbomachinery, state-variable modelling of fluid-dynamics processes, and a model for the SSME high pressure oxidizer turbopump shaft seal system. A discussion of sensor development includes the topics of sensor development for the rocket engine condition monitoring system and the heat flux measurements in SSME turbine blade tester.

  2. Enhanced animal productivity and health with improved manure management in 2nd Generation Environmentally Superior Technology in North Carolina: I. Water quality

    Technology Transfer Automated Retrieval System (TEKTRAN)

    New legislation in North Carolina promotes the replacement of old lagoon technology with new Environmentally Superior Technology. Scientists at ARS Florence Center and industry cooperators completed design and demonstration of a second generation treatment system for swine waste that can achieve hig...

  3. Handbook of Response to Intervention: The Science and Practice of Multi-Tiered Systems of Support, 2nd Edition

    ERIC Educational Resources Information Center

    Jimerson, Shane R., Ed.; Burns, Matthew K., Ed.; VanDerHeyden, Amanda M., Ed.

    2016-01-01

    The second edition of this essential handbook provides a comprehensive, updated overview of the science that informs best practices for the implementation of response to intervention (RTI) processes within Multi-Tiered Systems of Support (MTSS) to facilitate the academic success of all students. The volume includes insights from leading scholars…

  4. Second-order adjoint sensitivity analysis methodology (2nd-ASAM) for computing exactly and efficiently first- and second-order sensitivities in large-scale linear systems: II. Illustrative application to a paradigm particle diffusion problem

    NASA Astrophysics Data System (ADS)

    Cacuci, Dan G.

    2015-03-01

    This work presents an illustrative application of the second-order adjoint sensitivity analysis methodology (2nd-ASAM) to a paradigm neutron diffusion problem, which is sufficiently simple to admit an exact solution, thereby making transparent the underlying mathematical derivations. The general theory underlying 2nd-ASAM indicates that, for a physical system comprising Nα parameters, the computation of all of the first- and second-order response sensitivities requires (per response) at most (2Nα + 1) "large-scale" computations using the first-level and, respectively, second-level adjoint sensitivity systems (1st-LASS and 2nd-LASS). Very importantly, however, the illustrative application presented in this work shows that the actual number of adjoint computations needed for computing all of the first- and second-order response sensitivities may be significantly less than (2Nα + 1) per response. For this illustrative problem, four "large-scale" adjoint computations sufficed for the complete and exact computations of all 4 first- and 10 distinct second-order derivatives. Furthermore, the construction and solution of the 2nd-LASS requires very little additional effort beyond the construction of the adjoint sensitivity system needed for computing the first-order sensitivities. Very significantly, only the sources on the right-sides of the diffusion (differential) operator needed to be modified; the left-side of the differential equations (and hence the "solver" in large-scale practical applications) remained unchanged. All of the first-order relative response sensitivities to the model parameters have significantly large values, of order unity. Also importantly, most of the second-order relative sensitivities are just as large, and some even up to twice as large as the first-order sensitivities. In the illustrative example presented in this work, the second-order sensitivities contribute little to the response variances and covariances. However, they have the

  5. Techno-economic evaluation of 2nd generation bioethanol production from sugar cane bagasse and leaves integrated with the sugar-based ethanol process

    PubMed Central

    2012-01-01

    Background Bioethanol produced from the lignocellulosic fractions of sugar cane (bagasse and leaves), i.e. second generation (2G) bioethanol, has a promising market potential as an automotive fuel; however, the process is still under investigation on pilot/demonstration scale. From a process perspective, improvements in plant design can lower the production cost, providing better profitability and competitiveness if the conversion of the whole sugar cane is considered. Simulations have been performed with AspenPlus to investigate how process integration can affect the minimum ethanol selling price of this 2G process (MESP-2G), as well as improve the plant energy efficiency. This is achieved by integrating the well-established sucrose-to-bioethanol process with the enzymatic process for lignocellulosic materials. Bagasse and leaves were steam pretreated using H3PO4 as catalyst and separately hydrolysed and fermented. Results The addition of a steam dryer, doubling of the enzyme dosage in enzymatic hydrolysis, including leaves as raw material in the 2G process, heat integration and the use of more energy-efficient equipment led to a 37 % reduction in MESP-2G compared to the Base case. Modelling showed that the MESP for 2G ethanol was 0.97 US$/L, while in the future it could be reduced to 0.78 US$/L. In this case the overall production cost of 1G + 2G ethanol would be about 0.40 US$/L with an output of 102 L/ton dry sugar cane including 50 % leaves. Sensitivity analysis of the future scenario showed that a 50 % decrease in the cost of enzymes, electricity or leaves would lower the MESP-2G by about 20%, 10% and 4.5%, respectively. Conclusions According to the simulations, the production of 2G bioethanol from sugar cane bagasse and leaves in Brazil is already competitive (without subsidies) with 1G starch-based bioethanol production in Europe. Moreover 2G bioethanol could be produced at a lower cost if subsidies were used to compensate for the opportunity cost from the

  6. [Implications of TCGA Network Data on 2nd Generation Immunotherapy Concepts Based on PD-L1 and PD-1 Target Structures].

    PubMed

    Peters, I; Tezval, H; Kramer, M W; Wolters, M; Grünwald, V; Kuczyk, M A; Serth, J

    2015-11-01

    The era of cytokines, given to patients with metastatic renal cell carcinoma (mRCC) as part of an unspecific immunomodulatory treatment concept, seems to have ended with the introduction of targeted therapies. However, preliminary data from studies on treatment with checkpoint inhibitors (e. g. anti-PD-1 and anti-PD-L1) may point the way to second-generation immunotherapy. The rationale of such immunomodulatory treatment is to stop or interrupt the tumour from "escaping" the body's immune defence. Thompson et al. report that increased protein expression of PD-L1 (CD274/ B7-H1) in tumour cells and tumour-infiltrating immune cells (TILs; lymphocytes and histiocytes) is associated with unfavourable clinical pathological parameters as well as poor survival. In small pilot groups of mRCC patients it was found that increased PD-L1 protein expression in tumours and TILs may be correlated with the objective response to anti-PD-1 treatment. Sometimes, however, a very wide variety of response rates was observed, which raises the question if this can be explained by individual expression levels of PD-L1 (CD 274) or PD-1 (PDCD1).Recently published data from the Cancer Genome Atlas (TCGA) Kidney Renal Clear Cell Carcinoma (KIRC) Network now provide a genome-wide data base that allows us to review or validate the molecular results obtained in clear cell renal cell carcinomas (ccRCC) to date.In this study, we analysed the TCGA KIRC mRNA expression data for PD-L1 and PD-1 for a possible association with clinical pathological parameters and the survival of 417 ccRCC patients.The mRNA expression of PD-L1 in primary nephrectomy specimens revealed no significant association with unfavourable clinical parameters. Interestingly, though, a positive correlation with patient survival was found (HR=0,59, p=0,006).These results, which partly contradict the concept applied to date, point out the necessity to ascertain the characteristics of PD-L1 and PD-1 expression at mRNA and protein

  7. Test Review: The Profile of Mood States 2nd Edition

    ERIC Educational Resources Information Center

    Lin, Shuqiong; Hsiao, Yu-Yu; Wang, Miao

    2014-01-01

    The "Profile of Mood States 2nd Edition" (POMS 2) was published in 2012 by Multi-Health Systems (MHS) to assess transient feelings and mood among individuals aged 13 years and above. Evolving from the original POMS (McNair, Lorr, & Droppleman, 1971, 1992), the POMS 2 was designed for youth (13-17 years old) and adults (18 years old…

  8. Aquatic pollution, 2nd ed

    SciTech Connect

    Laws, E.A.

    1993-01-01

    This book systematically covers all aspects of water pollution in marine and freshwater systems. Didactic style, frequent use of case studies and an extensive bibliography facilitate understanding of fundamental concepts. Offers basic, relevant ecological and toxicological information. Straightforward presentation of the scientific aspects of environmental issues. Information updated, particularly the discussion of toxicology and the case studies of water pollution. Three new chapters on acid rain, groundwater pollution and plastics are added.

  9. Phase equilibria and crystal chemistry of the CaO–1/2 Nd{sub 2}O{sub 3}–CoO{sub z} system at 885 °C in air

    SciTech Connect

    Wong-Ng, W.; Laws, W.; Talley, K.R.; Huang, Q.; Yan, Y.; Martin, J.; Kaduk, J.A.

    2014-07-01

    The phase diagram of the CaO–1/2 Nd{sub 2}O{sub 3}–CoO{sub z} system at 885 °C in air has been determined. The system consists of two calcium cobaltate compounds that have promising thermoelectric properties, namely, the 2D thermoelectric oxide solid solution, (Ca{sub 3−x}Nd{sub x})Co{sub 4}O{sub 9−z} (0≤x≤0.5), which has a misfit layered structure, and Ca{sub 3}Co{sub 2}O{sub 6} which consists of 1D chains of alternating CoO{sub 6} trigonal prisms and CoO{sub 6} octahedra. Ca{sub 3}Co{sub 2}O{sub 6} was found to be a point compound without the substitution of Nd on the Ca site. The reported Nd{sub 2}CoO{sub 4} phase was not observed at 885 °C. A ternary (Ca{sub 1−x}Nd{sub 1+x})CoO{sub 4−z} (x=0) phase, or (CaNdCo)O{sub 4−z}, was found to be stable at this temperature. A solid solution region of distorted perovskite (Nd{sub 1−x}Ca{sub x})CoO{sub 3−z} (0≤x≤0.25, space group Pnma) was established. In the peripheral binary systems, while a solid solution region was identified for (Nd{sub 1−x}Ca{sub x}){sub 2}O{sub 3−z} (0≤x≤0.2), Nd was not found to substitute in the Ca site of CaO. Six solid solution tie-line regions and six three-phase regions were determined in the CaO–Nd{sub 2}O{sub 3}–CoO{sub z} system in air. - Graphical abstract: Phase diagram of the 1/2 Nd{sub 2}O{sub 3}–CaO–CoO{sub x} system at 885 °C, showing the limits of various solid solutions, and the tie-line relationships of various phases. - Highlights: • Phase diagram of the CaO–1/2 Nd{sub 2}O{sub 3}–CoO{sub z} system constructed. • System consists of thermoelectric oxide (Ca{sub 3−x}Nd{sub x})Co{sub 4}O{sub 9−z} (0≤x≤0.5). • Structures of (Nd{sub 1−x}Ca{sub x})CoO{sub 3−z} and (CaNdCo)O{sub 4−z} determined.

  10. PIRLS 2016 Assessment Framework. 2nd Edition

    ERIC Educational Resources Information Center

    Mullis, Ina V. S., Ed.; Martin, Michael O., Ed.

    2015-01-01

    The "PIRLS 2016 Assessment Framework, 2nd Edition" provides the foundation for the three international assessments planned as part of the International Association for the Evaluation of Educational Achievement's Progress in International Reading Literacy Study (PIRLS) 2016: PIRLS, PIRLS Literacy, and ePIRLS. PIRLS represents the…

  11. AIAA/NASA International Symposium on Space Information Systems, 2nd, Pasadena, CA, Sept. 17-19, 1990, Proceedings. Vols. 1 & 2

    NASA Technical Reports Server (NTRS)

    Tavenner, Leslie A. (Editor)

    1991-01-01

    These proceedings overview major space information system projects and lessons learned from current missions. Other topics include the science information system requirements for the 1990s, an information systems design approach for major programs, the technology needs and projections, the standards for space data information systems, the artificial intelligence technology and applications, international interoperability, and spacecraft data systems and architectures advanced communications. Other topics include the software engineering technology and applications, the multimission multidiscipline information system architectures, the distributed planning and scheduling systems and operations, and the computer and information systems architectures. Paper presented include prospects for scientific data analysis systems for solar-terrestrial physics in the 1990s, the Columbus data management system, data storage technologies for the future, the German aerospace research establishment, and launching artificial intelligence in NASA ground systems.

  12. The transient nature of 2nd-order stereopsis.

    PubMed

    Hess, Robert F; Wilcox, Laurie M

    2008-05-01

    There are currently two competing dichotomies used to describe how local stereoscopic information is processed by the human visual system. The first is in terms of the type of the spatial filtering operations used to extract relevant image features prior to stereoscopic analysis (i.e. 1st- vs 2nd-order stereo; [Hess, R. F., & Wilcox, L. M. (1994). Linear and non-linear filtering in stereopsis. Vision Research, 34, 2431-2438]). The second is in terms of the temporal properties of the mechanisms used to process stereoscopic information (i.e. sustained vs transient stereo; [Schor, C. M., Edwards, M., & Pope, D. R. (1998). Spatial-frequency and contrast tuning of the transient-stereopsis system. Vision Research, 38(20), 3057-3068]). Here we compare the dynamics of 1st- and 2nd-order stereopsis using several types of stimuli and find a clear dissociation in which 1st-order stimuli exhibit sustained properties while 2nd-order patterns show more transient properties. Our results and analyses unify and simplify two complimentary bodies of work. PMID:18407312

  13. Building the System: Making Science Education Work. Putting the Pieces Together. Proceedings of the Annual Conference (2nd, Washington, D.C., February 24-26, 1994).

    ERIC Educational Resources Information Center

    National Science Foundation, Washington, DC. Directorate for Education and Human Resources.

    Systemic reform, by definition, requires a concerted effort on the part of many toward change. In an effort to continue to promote systemic reform in science and mathematics education, a 3-day conference provided the forum necessary for many to share their insights and concerns on the issues. A brief discussion of four components of the conference…

  14. Method and system for knowledge discovery using non-linear statistical analysis and a 1st and 2nd tier computer program

    DOEpatents

    Hively, Lee M.

    2011-07-12

    The invention relates to a method and apparatus for simultaneously processing different sources of test data into informational data and then processing different categories of informational data into knowledge-based data. The knowledge-based data can then be communicated between nodes in a system of multiple computers according to rules for a type of complex, hierarchical computer system modeled on a human brain.

  15. IBM Academic Information Systems University AEP Conference: "Tools for Learning" (2nd, San Diego, California, April 5-8, 1986). Agenda [and Abstracts].

    ERIC Educational Resources Information Center

    International Business Machines Corp., Milford, CT. Academic Information Systems.

    This agenda lists activities scheduled for the second IBM (International Business Machines) Academic Information Systems University AEP (Advanced Education Projects) Conference, which was designed to afford the universities participating in the IBM-sponsored AEPs an opportunity to demonstrate their AEP experiments in educational computing. In…

  16. Test Review: Kovacs, M. "Children's Depression Inventory 2 (CDI 2)" (2nd ed.). North Tonawanda, NY: Multi-Health Systems Inc, 2011

    ERIC Educational Resources Information Center

    Bae, Yunhee

    2012-01-01

    This article presents a review of the Children's Depression Inventory 2 (CDI 2), published by Multi-Health Systems (MHS) to assess depressive symptoms in 7- to 17-year-old children and adolescents. Given the importance of early diagnosis and treatment (Kovacs & Devlin, 1998), the CDI 2 can assist professionals to pinpoint critical depressive…

  17. Joint conference of iMEC 2015 (2nd International Manufacturing Engineering Conference & APCOMS 2015 (3rd Asia-Pacific Conference on Manufacturing Systems)

    NASA Astrophysics Data System (ADS)

    2016-02-01

    The iMEC 2015 is the second International Manufacturing Engineering Conference organized by the Faculty of Manufacturing, Universiti Malaysia Pahang (UMP), held from 12-14th November 2015 in Kuala Lumpur, Malaysia, with a theme "Materials, Manufacturing and Systems for Tomorrow". For the first time, iMEC is organized together with 3rd Asia- Pacific Conference on Manufacturing System (APCOMS 2015) which owned by Fakulti Teknologi Industri, Institut Teknologi Bandung (ITB), Indonesia. This is an extended collaboration between UMP and ITB to intensify knowledge sharing and experiences between higher learning institutions. This conference (iMEC & APCOMS 2015) is a platform for knowledge exchange and the growth of ideas, particularly in manufacturing engineering. The conference aims to bring researchers, academics, scientists, students, engineers and practitioners from around the world together to present their latest findings, ideas, developments and applications related to manufacturing engineering and other related research areas. With rapid advancements in manufacturing engineering, iMEC is an appropriate medium for the associated community to keep pace with the changes. In 2015, the conference theme is “Materials, Manufacturing and Systems for Tomorrow” which reflects the acceleration of knowledge and technology in global manufacturing. The papers in these proceedings are examples of the work presented at the conference. They represent the tip of the iceberg, as the conference attracted over 200 abstracts from Malaysia, Indonesia, Japan, United Kingdom, Australia, India, Bangladesh, South Africa, Turkey and Morocco and 151 full papers were accepted in these proceedings. The conference was run in four parallel sessions with 160 presenters sharing their latest finding in the areas of manufacturing process, systems, advanced materials and automation. The first keynote presentation was given by Prof. B. S. Murthy (IIT, Madras) on "Nanomaterials with Exceptional

  18. 2nd International Planetary Probe Workshop

    NASA Technical Reports Server (NTRS)

    Venkatapathy, Ethiraj; Martinez, Ed; Arcadi, Marla

    2005-01-01

    Included are presentations from the 2nd International Planetary Probe Workshop. The purpose of the second workshop was to continue to unite the community of planetary scientists, spacecraft engineers and mission designers and planners; whose expertise, experience and interests are in the areas of entry probe trajectory and attitude determination, and the aerodynamics/aerothermodynamics of planetary entry vehicles. Mars lander missions and the first probe mission to Titan made 2004 an exciting year for planetary exploration. The Workshop addressed entry probe science, engineering challenges, mission design and instruments, along with the challenges of reconstruction of the entry, descent and landing or the aerocapture phases. Topics addressed included methods, technologies, and algorithms currently employed; techniques and results from the rich history of entry probe science such as PAET, Venera/Vega, Pioneer Venus, Viking, Galileo, Mars Pathfinder and Mars MER; upcoming missions such as the imminent entry of Huygens and future Mars entry probes; and new and novel instrumentation and methodologies.

  19. Scoping analysis of the Advanced Test Reactor using SN2ND

    SciTech Connect

    Wolters, E.; Smith, M.

    2012-07-26

    A detailed set of calculations was carried out for the Advanced Test Reactor (ATR) using the SN2ND solver of the UNIC code which is part of the SHARP multi-physics code being developed under the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program in DOE-NE. The primary motivation of this work is to assess whether high fidelity deterministic transport codes can tackle coupled dynamics simulations of the ATR. The successful use of such codes in a coupled dynamics simulation can impact what experiments are performed and what power levels are permitted during those experiments at the ATR. The advantages of the SN2ND solver over comparable neutronics tools are its superior parallel performance and demonstrated accuracy on large scale homogeneous and heterogeneous reactor geometries. However, it should be noted that virtually no effort from this project was spent constructing a proper cross section generation methodology for the ATR usable in the SN2ND solver. While attempts were made to use cross section data derived from SCALE, the minimal number of compositional cross section sets were generated to be consistent with the reference Monte Carlo input specification. The accuracy of any deterministic transport solver is impacted by such an approach and clearly it causes substantial errors in this work. The reasoning behind this decision is justified given the overall funding dedicated to the task (two months) and the real focus of the work: can modern deterministic tools actually treat complex facilities like the ATR with heterogeneous geometry modeling. SN2ND has been demonstrated to solve problems with upwards of one trillion degrees of freedom which translates to tens of millions of finite elements, hundreds of angles, and hundreds of energy groups, resulting in a very high-fidelity model of the system unachievable by most deterministic transport codes today. A space-angle convergence study was conducted to determine the meshing and angular cubature

  20. The crystal structure of ^7Li2ND

    NASA Astrophysics Data System (ADS)

    Tsubota, Masami; Sorby, Magnus H.; Hino, Satoshi; Ichikawa, Takayuki; Hauback, Bjorn C.; Kojima, Yoshitsugu

    2008-03-01

    Recently much attention has been given to reversible hydrogen storage materials possessing high gravimetric capacity. Lithium amide/imide systems are promising candidates. Chen et al.[1] found that a mixture of lithium amide and lithium hydride can reversibly store hydrogen up to 6.5 mass% forming lithium imide (Li2NH). Among them, the crystal structure of Li2NH is still controversial. Balogh et al.[2] have reported a cubic structure model. However, this model differs significantly from theoretical structure models. In this work, the crystal structure of the isotopically substituted ^7Li2ND has been investigated by powder neutron and synchrotron X-ray diffraction experiments. In our data some peaks, which should be a single peak for cubic symmetry, were obviously split indicating a lower symmetry than cubic for lithium imide. The structure of ^7Li2ND will be described. [1] P. Chen et al., J. Phys. Chem. B 107 (2003) 10967. [2] M.P. Balogh et al., J. Alloys Compd. 420 (2006) 326.

  1. Electrical power generating system

    NASA Technical Reports Server (NTRS)

    Nola, F. J. (Inventor)

    1983-01-01

    A power generating system for adjusting coupling an induction motor, as a generator, to an A.C. power line wherein the motor and power line are connected through a triac is described. The triac is regulated to normally turn on at a relatively late point in each half cycle of its operation, whereby at less than operating speed, and thus when the induction motor functions as a motor rather than as a generator, power consumption from the line is substantially reduced.

  2. Distributed generation systems model

    SciTech Connect

    Barklund, C.R.

    1994-12-31

    A slide presentation is given on a distributed generation systems model developed at the Idaho National Engineering Laboratory, and its application to a situation within the Idaho Power Company`s service territory. The objectives of the work were to develop a screening model for distributed generation alternatives, to develop a better understanding of distributed generation as a utility resource, and to further INEL`s understanding of utility concerns in implementing technological change.

  3. Wind turbine generator system

    SciTech Connect

    Kirschbaum, H.S.

    1982-11-02

    Wind turbine generator systems incorporating a multi-speed pole amplitude modulated type dynamo electric machine allow efficient operation at consecutive speeds in a ratio preferably less than 2:1. A current limiting reactor, preferably including an inductance coil, and an over-running clutch, are utilized in conjunction with any multi-speed generation system to alleviate impact on a utility grid during switching among operational speeds.

  4. Steam generator support system

    DOEpatents

    Moldenhauer, James E.

    1987-01-01

    A support system for connection to an outer surface of a J-shaped steam generator for use with a nuclear reactor or other liquid metal cooled power source. The J-shaped steam generator is mounted with the bent portion at the bottom. An arrangement of elongated rod members provides both horizontal and vertical support for the steam generator. The rod members are interconnected to the steam generator assembly and a support structure in a manner which provides for thermal distortion of the steam generator without the transfer of bending moments to the support structure and in a like manner substantially minimizes forces being transferred between the support structure and the steam generator as a result of seismic disturbances.

  5. Steam generator support system

    DOEpatents

    Moldenhauer, J.E.

    1987-08-25

    A support system for connection to an outer surface of a J-shaped steam generator for use with a nuclear reactor or other liquid metal cooled power source is disclosed. The J-shaped steam generator is mounted with the bent portion at the bottom. An arrangement of elongated rod members provides both horizontal and vertical support for the steam generator. The rod members are interconnected to the steam generator assembly and a support structure in a manner which provides for thermal distortion of the steam generator without the transfer of bending moments to the support structure and in a like manner substantially minimizes forces being transferred between the support structure and the steam generator as a result of seismic disturbances. 4 figs.

  6. Wind power generating system

    SciTech Connect

    Schachle, Ch.; Schachle, E. C.; Schachle, J. R.; Schachle, P. J.

    1985-03-12

    Normally feathered propeller blades of a wind power generating system unfeather in response to the actuation of a power cylinder that responds to actuating signals. Once operational, the propellers generate power over a large range of wind velocities. A maximum power generation design point signals a feather response of the propellers so that once the design point is reached no increase in power results, but the system still generates power. At wind speeds below this maximum point, propeller speed and power output optimize to preset values. The propellers drive a positive displacement pump that in turn drives a positive displacement motor of the swash plate type. The displacement of the motor varies depending on the load on the system, with increasing displacement resulting in increasing propeller speeds, and the converse. In the event of dangerous but not clandestine problems developing in the system, a control circuit dumps hydraulic pressure from the unfeathering cylinder resulting in a predetermined, lower operating pressure produced by the pump. In the event that a problem of potentially cladestine consequence arises, the propeller unfeathering cylinder immediately unloads. Upon startup, a bypass around the motor is blocked, applying a pressure across the motor. The motor drives the generator until the generator reaches a predetermined speed whereupon the generator is placed in circuit with a utility grid and permitted to motor up to synchronous speed.

  7. Elements of the Next Generation Science Standards' (NGSS) New Framework for K-12 Science Education aligned with STEM designed projects created by Kindergarten, 1st and 2nd grade students in a Reggio Emilio project approach setting

    NASA Astrophysics Data System (ADS)

    Facchini, Nicole

    This paper examines how elements of the Next Generation Science Standards' (NGSS) New Framework for K-12 Science Education standards (National Research Council 2011)---specifically the cross-cutting concept "cause and effect" are aligned with early childhood students' creation of projects of their choice. The study took place in a Reggio Emilio-inspired, K-12 school, in a multi-aged kindergarten, first and second grade classroom with 14 students. Students worked on their projects independently with the assistance of their peers and teachers. The students' projects and the alignment with the Next Generation Science Standards' New Framework were analyzed by using pre and post assessments, student interviews, and discourse analysis. Results indicate that elements of the New Framework for K-12 Science Education emerged through students' project presentation, particularly regarding the notion of "cause and effect". More specifically, results show that initially students perceived the relationship between "cause and effect" to be negative.

  8. Florida Investigates 2nd Possible Local Transmission of Zika Virus

    MedlinePlus

    ... html Florida Investigates 2nd Possible Local Transmission of Zika Virus If confirmed, cases would be first instances ... investigating a second possible case of locally transmitted Zika infection. On Tuesday, the first possible case of ...

  9. 2nd Quarter Transportation Report FY 2014

    SciTech Connect

    Gregory, L.

    2014-07-30

    This report satisfies the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Field Office (NNSA/NFO) commitment to prepare a quarterly summary report of radioactive waste shipments to the Nevada National Security Site (NNSS) Radioactive Waste Management Complex (RWMC) at Area 5. There were no shipments sent for offsite treatment and returned to the NNSS this quarter. This report summarizes the second quarter of fiscal year (FY) 2014 low-level radioactive waste (LLW) and mixed low-level radioactive waste (MLLW) shipments. This report also includes annual summaries for FY 2014 in Tables 4 and 5. Tabular summaries are provided which include the following: Sources of and carriers for LLW and MLLW shipments to and from the NNSS; Number and external volume of LLW and MLLW shipments; Highway routes used by carriers; and Incident/accident data applicable to LLW and MLLW shipments. In this report shipments are accounted for upon arrival at the NNSS, while disposal volumes are accounted for upon waste burial. The disposal volumes presented in this report do not include minor volumes of non-radioactive materials that were approved for disposal. Volume reports showing cubic feet (ft3) generated using the Low-Level Waste Information System may vary slightly due to differing rounding conventions.

  10. Evaluation of a Hand Washing Program for 2nd-Graders

    ERIC Educational Resources Information Center

    Tousman, Stuart; Arnold, Dani; Helland, Wealtha; Roth, Ruth; Heshelman, Nannatte; Castaneda, Oralia; Fischer, Emily; O'Neil, Kristen; Bileto, Stephanie

    2007-01-01

    The purpose of this project was to determine if a multiple-week learner-centered hand washing program could improve hand hygiene behaviors of 2nd-graders in a northern Illinois public school system. Volunteers from the Rockford Hand Washing Coalition went into 19 different classrooms for 4 consecutive weeks and taught a learner-centered program.…

  11. Molecular motors and the 2nd law of thermodynamics

    NASA Astrophysics Data System (ADS)

    Wang, Zhisong

    2014-03-01

    Molecular motors from biology and nanotechnology often operate on chemical energy of fuel molecules in an isothermal environment, unlike macroscopic heat engines that draw energy from a heat flow between two temperatures. Nevertheless, isothermal molecular motors are still subject to the 2nd law of thermodynamics in a fundamental way: their directional motion must cost a finite amount of energy other than the environmental heat even though no work is done; otherwise the 2nd law would be violated. Hence the 2nd law requires a finite energy price for pure direction of molecular motors. But what is the lowest price of direction allowed by the 2nd law? And how does the 2nd law-decreed price of direction limit performance of molecular motors? In the talk, I shall present our theoretical study of the 2nd law-molecular motor link on basis of the accumulated biomotor phenomenology, and also introduce our experimental effort to develop biomimetic DNA bipedal nanomotors following the mechanistic guidelines out of the theoretical study. [Main contents of this talk are from references:] This work is partially supported by FRC grants R-144-000-259-112, R-144-000-290-112 and R-144-000-320-112.

  12. Electrical power generating system. [for windpowered generation

    NASA Technical Reports Server (NTRS)

    Nola, F. J. (Inventor)

    1981-01-01

    An alternating current power generation system adopted to inject power in an already powered power line is discussed. The power generating system solves to adjustably coup an induction motor, as a generator, to an ac power line wherein the motor and power line are connected through a triac. The triac is regulated to normally turn on at a relatively late point in each half cycle of its operation, whereby at less than operating speed, and thus when the induction motor functions as a motor rather than as a generator, power consumption from the line is substantially reduced. The principal application will be for windmill powered generation.

  13. 2nd PEGS Annual Symposium on Antibodies for Cancer Therapy

    PubMed Central

    Ho, Mitchell; Royston, Ivor; Beck, Alain

    2012-01-01

    The 2nd Annual Antibodies for Cancer Therapy symposium, organized again by Cambridge Healthtech Institute as part of the Protein Engineering Summit, was held in Boston, USA from April 30th to May 1st, 2012. Since the approval of the first cancer antibody therapeutic, rituximab, fifteen years ago, eleven have been approved for cancer therapy, although one, gemtuzumab ozogamicin, was withdrawn from the market.  The first day of the symposium started with a historical review of early work for lymphomas and leukemias and the evolution from murine to human antibodies. The symposium discussed the current status and future perspectives of therapeutic antibodies in the biology of immunoglobulin, emerging research on biosimilars and biobetters, and engineering bispecific antibodies and antibody-drug conjugates. The tumor penetration session was focused on the understanding of antibody therapy using ex vivo tumor spheroids and the development of novel agents targeting epithelial junctions in solid tumors. The second day of the symposium discussed the development of new generation recombinant immunotoxins with low immunogenicity, construction of chimeric antigen receptors, and the proof-of-concept of ‘photoimmunotherapy’. The preclinical and clinical session presented antibodies targeting Notch signaling and chemokine receptors.  Finally, the symposium discussed emerging technologies and platforms for therapeutic antibody discovery. PMID:22864478

  14. Plasma motor generator system

    NASA Technical Reports Server (NTRS)

    Hite, Gerald E.

    1987-01-01

    The significant potential advantages of a plasma motor generator system over conventional systems for the generation of electrical power and propulsion for spacecraft in low Earth orbits warrants its further investigation. The two main components of such a system are a long insulated wire and the plasma generating hollow cathodes needed to maintain electrical contact with the ionosphere. Results of preliminary theoretical and experimental investigations of this system are presented. The theoretical work involved the equilibrium configurations of the wire and the nature of small oscillation about these equilibrium positions. A particularly interesting result was that two different configurations are allowed when the current is above a critical value. Experimental investigations were made of the optimal starting and running conditions for the proposed, low current hollow cathodes. Although optimal ranges of temperature, argon pressure and discharge voltage were identified, start up became progressively more difficult. This supposed depletion or contamination of the emissive surface could be countered by the addition of new emissive material.

  15. 2nd Generation Reusable Launch Vehicle (2G RLV). Revised

    NASA Technical Reports Server (NTRS)

    Matlock, Steve; Sides, Steve; Kmiec, Tom; Arbogast, Tim; Mayers, Tom; Doehnert, Bill

    2001-01-01

    This is a revised final report and addresses all of the work performed on this program. Specifically, it covers vehicle architecture background, definition of six baseline engine cycles, reliability baseline (space shuttle main engine QRAS), and component level reliability/performance/cost for the six baseline cycles, and selection of 3 cycles for further study. This report further addresses technology improvement selection and component level reliability/performance/cost for the three cycles selected for further study, as well as risk reduction plans, and recommendation for future studies.

  16. ASTM standards on thermocouples, 2nd edition

    SciTech Connect

    Not Available

    1986-01-01

    This edition has been expanded to include sixteen selected ASTM methods and practices on thermocouples. It also contains a Temperature Electromotive Force (EMF) Table for the NICROSIL-NISIL Thermocouple System.

  17. Emissions trading: principles and practice. 2nd

    SciTech Connect

    Tietenberg, T.H.

    2006-02-15

    The author demonstrates how emissions trading became an attractive alternative to command-and-control policies that would have required the EPA to disallow the opening of new plants in the middle of the recession-burdened 1970s. His examination of the evolution of this system includes, among other applications, the largest multinational trading system ever conceived, the European Union's Greenhouse Gas Emission Trading Scheme (EUETG), and the use of emissions trading in the Kyoto Protocol.

  18. Next Generation HVAC System

    NASA Astrophysics Data System (ADS)

    Takagi, Yasuo; Murakami, Yoshiki; Hanada, Yuuichi; Nishimura, Nobutaka; Yamazaki, Kenichi; Itoh, Yasuyuki

    A new HVAC (Heating, Ventilating, and Air-Conditioning) system for buildings is proposed. The key technology for the system is a twin coil air handling unit (AHU) and its advanced control method. One coil is equipped to cool and dehumidify the fresh air intake, and the other coil is for cooling circulated air. The deeply chilled water is necessary only for removing the moisture from the fresh air. The latter coil requires moderately cool water according to the HVAC load. Then 2 kinds of chilled water in terms of temperature should be prepared. The structure helps saving the energy consumption for air-conditioning because the higher chilled water temperature implies the better chiller efficiency (COP: Coefficient of Performance). In addition, an advanced control method that is called an ‘Air-Water cooperation system’ is introduced. The control system mainly focuses on energy savings through changing the temperature of the chilled water and supply air according to the HVAC load and weather conditions. In this paper, we introduce a Next Generation HVAC system with its control system and present evaluation results of the system for the model-building simulator.

  19. Space physiology and medicine (2nd edition)

    NASA Technical Reports Server (NTRS)

    Nicogossian, Arnauld E. (Editor); Huntoon, Carolyn Leach (Editor); Pool, Sam L. (Editor)

    1989-01-01

    The fundamental biomedical issues involved in manned space flight are examined in review chapters contributed by leading U.S. experts. Sections are devoted to the history of manned space flight, the space environment, space-flight systems and procedures, physiological adaptation to space flight, health maintenance of space crewmembers, and medical problems of space flight. Extensive diagrams, drawings, graphs, photographs, and tables of numerical data are provided.

  20. Next generation information systems

    SciTech Connect

    Limback, Nathan P; Medina, Melanie A; Silva, Michelle E

    2010-01-01

    The Information Systems Analysis and Development (ISAD) Team of the Safeguards Systems Group at Los Alamos National Laboratory (LANL) has been developing web based information and knowledge management systems for sixteen years. Our vision is to rapidly and cost effectively provide knowledge management solutions in the form of interactive information systems that help customers organize, archive, post and retrieve nonproliferation and safeguards knowledge and information vital to their success. The team has developed several comprehensive information systems that assist users in the betterment and growth of their organizations and programs. Through our information systems, users are able to streamline operations, increase productivity, and share and access information from diverse geographic locations. The ISAD team is also producing interactive visual models. Interactive visual models provide many benefits to customers beyond the scope of traditional full-scale modeling. We have the ability to simulate a vision that a customer may propose, without the time constraints of traditional engineering modeling tools. Our interactive visual models can be used to access specialized training areas, controlled areas, and highly radioactive areas, as well as review site-specific training for complex facilities, and asset management. Like the information systems that the ISAD team develops, these models can be shared and accessed from any location with access to the internet. The purpose of this paper is to elaborate on the capabilities of information systems and interactive visual models as well as consider the possibility of combining the two capabilities to provide the next generation of infonnation systems. The collection, processing, and integration of data in new ways can contribute to the security of the nation by providing indicators and information for timely action to decrease the traditional and new nuclear threats. Modeling and simulation tied to comprehensive

  1. Conceptual design and optimization of a 1-1/2 generation PFBC plant task 14. Topical report

    SciTech Connect

    White, J.S.; Witman, P.M.; Harbaugh, L.; Rubow, L.N.; Horazak, D.A.

    1994-12-01

    The economics and performance of advanced pressurized fluidized bed (PFBC) cycles developed for utility applications during the last 10 years (especially the 2nd-Generation PFBC cycle) are projected to be favorable compared to conventional pulverized coal power plants. However, the improved economics of 2nd-Generation PFBC cycles are accompanied by the perception of increased technological risk related to the pressurized carbonizer and its associated gas cleanup systems. A PFBC cycle that removed the uncertainties of the carbonizer while retaining the high efficiency and low cost of a 2nd-Generation PFBC cycle could improve the prospects for early commercialization and pave the way for the introduction of the complete 2nd-Generation PFBC cycle at some later date. One such arrangement is a PFBC cycle with natural gas topping combustion, referred to as the 1.5-Generation PFBC cycle. This cycle combines the advantages of the 2nd-Generation PFBC plant with the reduced risk associated with a gas turbine burning natural gas, and can potentially be part of a phased approach leading to the commercialization of utility 2nd-Generation PFBC cycles. The 1.5-Generation PFBC may also introduce other advantages over the more complicated 2nd-Generation PFBC system. This report describes the technical and economic evaluation of 1.5-Generation PFBC cycles for utility or industrial power generation.

  2. Gas well deliquification. 2nd. ed.

    SciTech Connect

    James Lea; Henry Nickens; Mike Wells

    2008-03-15

    Chapter 1: Introduction; Chapter 2: Recognizing Symptoms of Liquid Loading in Gas Wells; Chapter 3: Critical Velocity; Chapter 4: Systems Nodal Analysis; Chapter 5: Sizing Tubing; Chapter 6: Compression; Chapter 7: Plunger Lift; Chapter 8: Use of Foam to Deliquefy Gas Wells; Chapter 9: Hydraulic Pumping; Chapter 10: Use of Beam Pumps to Deliquefy Gas Wells; Chapter 11: Gas Lift; Chapter 12: Electric Submersible Pumps; Chapter 13: Progressing Cavity Pumps; Chapter 14: Coal Bed Methane; Chapter 15: Production Automation. Chapter 14, by David Simpson, based in the San Juan Basin, addresses issues in coal bed methane, low pressure operations, gas compression, gas measurement, oil field construction, gas well deliquification and project management.

  3. Space Science Reference Guide, 2nd Edition

    NASA Technical Reports Server (NTRS)

    Dotson, Renee (Editor)

    2003-01-01

    This Edition contains the following reports: GRACE: Gravity Recovery and Climate Experiment; Impact Craters in the Solar System; 1997 Apparition of Comet Hale-Bopp Historical Comet Observations; Baby Stars in Orion Solve Solar System Mystery; The Center of the Galaxy; The First Rock in the Solar System; Fun Times with Cosmic Rays; The Gamma-Ray Burst Next Door; The Genesis Mission: An Overview; The Genesis Solar Wind Sample Return Mission; How to Build a Supermassive Black Hole; Journey to the Center of a Neutron Star; Kepler's Laws of Planetary Motion; The Kuiper Belt and Oort Cloud ; Mapping the Baby Universe; More Hidden Black Hole Dangers; A Polarized Universe; Presolar Grains of Star Dust: Astronomy Studied with Microscopes; Ring Around the Black Hole; Searching Antarctic Ice for Meteorites; The Sun; Astrobiology: The Search for Life in the Universe; Europa and Titan: Oceans in the Outer Solar System?; Rules for Identifying Ancient Life; Inspire ; Remote Sensing; What is the Electromagnetic Spectrum? What is Infrared? How was the Infrared Discovered?; Brief History of Gyroscopes ; Genesis Discovery Mission: Science Canister Processing at JSC; Genesis Solar-Wind Sample Return Mission: The Materials ; ICESat: Ice, Cloud, and Land Elevation Satellite ICESat: Ice, Cloud, and Land; Elevation Satellite ICESat: Ice, Cloud, and Land Elevation Satellite ICESat: Ice, Cloud, and Land Elevation Satellite ICESat: Ice, Cloud, and Land Elevation Satellite Measuring Temperature Reading; The Optical Telescope ; Space Instruments General Considerations; Damage by Impact: The Case at Meteor Crater, Arizona; Mercury Unveiled; New Data, New Ideas, and Lively Debate about Mercury; Origin of the Earth and Moon; Space Weather: The Invisible Foe; Uranus, Neptune, and the Mountains of the Moon; Dirty Ice on Mars; For a Cup of Water on Mars; Life on Mars?; The Martian Interior; Meteorites from Mars, Rocks from Canada; Organic Compounds in Martian Meteorites May be Terrestrial

  4. Advanced Chemistry Collection, 2nd Edition

    NASA Astrophysics Data System (ADS)

    2001-11-01

    Software requirements are given in Table 3. Some programs have additional special requirements. Please see the individual program abstracts at JCE Online or the documentation included on the CD-ROM for more specific information. Table 3. General software requirements for the Advanced Chemistry Collection.

    ComputerSystemOther Software(Required by one or more programs)
    Mac OS compatibleSystem 7.6.1 or higherAcrobat Reader (included)Mathcad; Mathematica;MacMolecule2; QuickTime 4; HyperCard Player
    Windows CompatibleWindows 2000, 98, 95, NT 4Acrobat Reader (included)Mathcad; Mathematica;PCMolecule2; QuickTime 4;HyperChem; Excel

    Literature Cited

    1. General Chemistry Collection, 5th ed.; J. Chem. Educ. Software, 2001, SP16.
    2. Advanced Chemistry Collection; J. Chem. Educ. Software, 2001, SP28.

  5. Antenna engineering handbook /2nd edition/

    NASA Astrophysics Data System (ADS)

    Johnson, R. C.; Jasik, H.

    Essential principles, methods, and data for solving a wide range of problems in antenna design and application are presented. The basic concepts and fundamentals of antennas are reviewed, followed by a discussion of arrays of discrete elements. Then all primary types of antennas currently in use are considered, providing concise descriptions of operating principles, design methods, and performance data. Small antennas, microstrip antennas, frequency-scan antennas, conformal and low-profile arrays, adaptive antennas, and phased arrays are covered. The major applications of antennas and the design methods peculiar to those applications are discussed in detail. The employment of antennas to meet the requirements of today's complex electronic systems is emphasized, including earth station antennas, satellite antennas, seeker antennas, microwave-relay antennas, tracking antennas, radiometer antennas, and ECM and ESM antennas. Finally, significant topics related to antenna engineering, such as transmission lines and waveguides, radomes, microwave propagation, and impedance matching and broadbanding, are addressed.

  6. Solar power generating system

    SciTech Connect

    Watson, J.C.

    1981-08-18

    A volatile liquid is circulated through a normally closed circuit, including expansion tubes within an expansion chamber where the sun's rays are focused on the tubes to heat the liquid, transforming it to an expanding gas to drive a fluid-operated motor, also in the circuit. The motor may drive a mechanical load or an electric generator. The generator drives a pump which compresses the gas back to a liquid state and returns the same to a reservoir and to the inlets of the expansion tubes in the expansion chamber. An air reservoir which is pressurized by a pump driven by the fluid operated motor has its outlet connected to the motor inlet so that during periods of darkness or cloud cover in which the volatile liquid is not expanded into a gas, the pressurized air will be automatically fed into the motor to continue to drive the same. A gimbal system automatically controlled by sun tracking devices supports the expansion chamber to continually focus the sun's rays onto the expansion tubes, regardless of the relative position of the sun and the base on which the gimbal system is mounted.

  7. Book Review: Bioassays with Arthropods: 2nd Edition

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The technical book "Bioassays with Arthropods: 2nd Edition" (2007. Jacqueline L. Robertson, Robert M. Russell, Haiganoush K, Preisler and N. E. Nevin, Eds. CRC Press, Boca Raton, FL, 224 pp.) was reviewed for the scientific readership of the peer-reviewed publication Journal of Economic Entomology. ...

  8. A Handbook for Classroom Instruction That Works, 2nd Edition

    ERIC Educational Resources Information Center

    Association for Supervision and Curriculum Development, 2012

    2012-01-01

    Perfect for self-help and professional learning communities, this handbook makes it much easier to apply the teaching practices from the ASCD-McREL best-seller "Classroom Instruction That Works: Research-Based Strategies for Increasing Student Achievement, 2nd Edition." The authors take you through the refined Instructional Planning Guide, so you…

  9. Intravenous Fluid Generation System

    NASA Technical Reports Server (NTRS)

    McQuillen, John; McKay, Terri; Brown, Daniel; Zoldak, John

    2013-01-01

    The ability to stabilize and treat patients on exploration missions will depend on access to needed consumables. Intravenous (IV) fluids have been identified as required consumables. A review of the Space Medicine Exploration Medical Condition List (SMEMCL) lists over 400 medical conditions that could present and require treatment during ISS missions. The Intravenous Fluid Generation System (IVGEN) technology provides the scalable capability to generate IV fluids from indigenous water supplies. It meets USP (U.S. Pharmacopeia) standards. This capability was performed using potable water from the ISS; water from more extreme environments would need preconditioning. The key advantage is the ability to filter mass and volume, providing the equivalent amount of IV fluid: this is critical for remote operations or resource- poor environments. The IVGEN technology purifies drinking water, mixes it with salt, and transfers it to a suitable bag to deliver a sterile normal saline solution. Operational constraints such as mass limitations and lack of refrigeration may limit the type and volume of such fluids that can be carried onboard the spacecraft. In addition, most medical fluids have a shelf life that is shorter than some mission durations. Consequently, the objective of the IVGEN experiment was to develop, design, and validate the necessary methodology to purify spacecraft potable water into a normal saline solution, thus reducing the amount of IV fluids that are included in the launch manifest. As currently conceived, an IVGEN system for a space exploration mission would consist of an accumulator, a purifier, a mixing assembly, a salt bag, and a sterile bag. The accumulator is used to transfer a measured amount of drinking water from the spacecraft to the purifier. The purifier uses filters to separate any air bubbles that may have gotten trapped during the drinking water transfer from flowing through a high-quality deionizing cartridge that removes the impurities in

  10. Idaho National Laboratory Quarterly Performance Analysis for the 2nd Quarter FY 2015

    SciTech Connect

    Mitchell, Lisbeth A.

    2015-04-01

    This report is published quarterly by the Idaho National Laboratory (INL) Quality and Performance Management Organization. The Department of Energy (DOE) Occurrence Reporting and Processing System (ORPS), as prescribed in DOE Order 232.2, “Occurrence Reporting and Processing of Operations Information,” requires a quarterly analysis of events, both reportable and not reportable, for the previous 12 months. This report is the analysis of events for the 2nd Qtr FY-15.

  11. Information Systems for Government and Business: Trends, Issues, Challenges. Proceedings of the Kawasaki International Seminar on the Information Systems Challenge for Government and Business (2nd, Kawasaki City, Japan, July 21-24, 1987).

    ERIC Educational Resources Information Center

    United Nations Centre for Regional Development, Nagoya (Japan).

    The 25 papers in this proceedings were presented by national and international information systems experts, development planners, and scholars at a seminar that was jointly sponsored by the United Nations Centre for Regional Development and the city of Kawasaki, Japan. Designed to reach a wider group of interested planning practitioners and…

  12. MHD Generating system

    DOEpatents

    Petrick, Michael; Pierson, Edward S.; Schreiner, Felix

    1980-01-01

    According to the present invention, coal combustion gas is the primary working fluid and copper or a copper alloy is the electrodynamic fluid in the MHD generator, thereby eliminating the heat exchangers between the combustor and the liquid-metal MHD working fluids, allowing the use of a conventional coalfired steam bottoming plant, and making the plant simpler, more efficient and cheaper. In operation, the gas and liquid are combined in a mixer and the resulting two-phase mixture enters the MHD generator. The MHD generator acts as a turbine and electric generator in one unit wherein the gas expands, drives the liquid across the magnetic field and thus generates electrical power. The gas and liquid are separated, and the available energy in the gas is recovered before the gas is exhausted to the atmosphere. Where the combustion gas contains sulfur, oxygen is bubbled through a side loop to remove sulfur therefrom as a concentrated stream of sulfur dioxide. The combustor is operated substoichiometrically to control the oxide level in the copper.

  13. 11 Years of Cloud Characteristics from SEVIRI: 2nd Edition of the CLAAS Dataset by CMSAF

    NASA Astrophysics Data System (ADS)

    Finkensieper, Stephan; Stengel, Martin; Fokke Meirink, Jan; van Zadelhoff, Gerd-Jan; Kniffka, Anke

    2016-04-01

    Spatiotemporal variability of clouds is an important aspect of the climate system. Therefore climate data records of cloud properties are valuable to many researchers in the climate community. The passive SEVIRI imager onboard the geostationary Meteosat Second Generation satellites is well suited for the needs of cloud retrievals as it provides measurements in 12 spectral channels every 15 minutes and thus allows for capturing both the spatial and the temporal variability of clouds. However, requirements on climate data records are high in terms of record length and homogeneity, so that intercalibration and homogenization among the available SEVIRI instruments becomes a crucial factor. We present the 2nd edition of the CLoud Property DAtAset using SEVIRI (CLAAS-2) generated within the EUMETSAT Satellite Application Facility on Climate Monitoring (CMSAF), that is temporally extended and qualitatively improved compared to the 1st edition. CLAAS-2 covers the time period 2004-2014 and features cloud mask, cloud top properties, cloud phase, cloud type, and microphysical cloud properties on the complete SEVIRI disc in 15-minute temporal resolution. Temporally and spatially averaged quantities, mean diurnal cycles and monthly histograms are included as well. CLAAS-2 was derived from a homogenized data basis, obtained by intercalibrating visible and infrared SEVIRI radiances (of Meteosat 8, 9 and 10) with MODIS, using state-of-the-art retrieval schemes. In addition to the dataset characteristics, we will present validation results using CALIPSO as reference observations. The CLAAS-2 dataset will allow for a large variety of applications of which some will be indicated in our presentation, with focus on determining diurnal to seasonal cycles, spatially resolved frequencies of cloud properties as well as showing the potential for using CLAAS-2 data for model process studies.

  14. PROCEEDINGS OF THE STATIONARY SOURCE COMBUSTION SYMPOSIUM (2ND) HELD IN NEW ORLEANS, LA. ON AUGUST 29-SEPTEMBER 1, 1977. VOLUME III. STATIONARY ENGINE, INDUSTRIAL PROCESS COMBUSTION SYSTEMS, AND ADVANCED PROCESSES

    EPA Science Inventory

    ;Contents: Application of combustion modifications to industrial combustion equipment; Boiler burner design criteria for retrofit with low-Btu gases; Environmental assessment of afterburner combustion systems; Advanced combustion systems for stationary gas turbine engines; Develo...

  15. Curriculum on the Edge of Survival: How Schools Fail to Prepare Students for Membership in a Democracy. 2nd Edition

    ERIC Educational Resources Information Center

    Heller, Daniel

    2012-01-01

    Typically, school curriculum has been viewed through the lens of preparation for the workplace or higher education, both worthy objectives. However, this is not the only lens, and perhaps not even the most powerful one to use, if the goal is to optimize the educational system. "Curriculum on the Edge of Survival, 2nd Edition," attempts to define…

  16. Two 2nd Circuit decisions represent mixed bag on insurance.

    PubMed

    2000-01-21

    The 2nd U.S. Circuit Court of Appeals in New York issued two important rulings within a week on the extent to which the Americans with Disabilities Act (ADA) regulates insurance practices. [Name removed] v. Allstate Life Insurance Co. was a plaintiff-friendly decision, finding that the insurance company illegally refused to sell life insurance to a married couple because of their mental disability, major depression. [Name removed]. v. Israel Discount Bank of New York was more defendant friendly and tackled the issue of whether the ADA permits different benefit caps for mental and physical disabilities. PMID:11367226

  17. Practical Approaches to Resolving Behaviour Problems. Selected Papers from the National Conference on Practical Approaches to Resolving Behaviour Problems (2nd, Sydney, New South Wales, Australia, July 1990). Programs Implementation and System Initiatives.

    ERIC Educational Resources Information Center

    Richardson, Susanna, Ed.; Izard, John, Ed.

    This collection of papers focuses on practical approaches to resolving behavior problems in the Australian school system. The papers are divided into four general categories: perspectives on behavior problems, focusing on families, schools and system initiatives, and programs in special settings. The papers include: (1) "Beyond Punishment," by…

  18. Hydrogen storage and generation system

    DOEpatents

    Dentinger, Paul M.; Crowell, Jeffrey A. W.

    2010-08-24

    A system for storing and generating hydrogen generally and, in particular, a system for storing and generating hydrogen for use in an H.sub.2/O.sub.2 fuel cell. The hydrogen storage system uses the beta particles from a beta particle emitting material to degrade an organic polymer material to release substantially pure hydrogen. In a preferred embodiment of the invention, beta particles from .sup.63Ni are used to release hydrogen from linear polyethylene.

  19. Book Review: Exploration of the Solar System by Infrared Remote Sensing. R.A. Hanel, B.J. Conrath, D.E. Jennings, R.E. Samuelson, 2nd ed., Cambridge University Press, Cambridge, 2003, ISBN 0521 818974

    NASA Astrophysics Data System (ADS)

    Crawford, Ian

    2004-12-01

    This book provides an astonishingly comprehensive review of its subject, from the fundamental physics of radiative transfer, through the design, calibration and operation of infrared spectrometers, to a summary of recent results. Along the way, it deals also with the spectra of diatomic and polyatomic molecules, and the structure and composition of planetary atmospheres. The treatment is authoritative-the authors have all been leading researchers in the field, and between them have something like 130 years experience in the study of planetary spectra using ground-based and space-borne instruments. While not shrinking from mathematical rigour, where this is required, the style is generally easy to follow, and should be accessible to postgraduate, and advanced undergraduate students, in relevant disciplines. Moreover, the treatment is so comprehensive that it is hard to imagine that even the most established planetary scientist would not learn something from it. The community can be grateful that the authors have chosen to distil their knowledge into a form suitable for passing on to their colleagues, and most importantly, the next generation of researchers.

  20. The Aussat second generation system

    NASA Astrophysics Data System (ADS)

    Nowland, Wayne

    This paper outlines the design of Aussat's second generation satellites, and overviews the proposed service applications for which the system has been designed. Market data are presented for Aussat's planned mobile satellite services, together with an outline of the associated mobile satellite terminal development program. The unique procurement arrangements for which Aussat is adopting its second generation system, including the requirements for 'turnkey' in-orbit delivery and contractor-supplied risk management, are also described.

  1. Generative electronic background music system

    SciTech Connect

    Mazurowski, Lukasz

    2015-03-10

    In this short paper-extended abstract the new approach to generation of electronic background music has been presented. The Generative Electronic Background Music System (GEBMS) has been located between other related approaches within the musical algorithm positioning framework proposed by Woller et al. The music composition process is performed by a number of mini-models parameterized by further described properties. The mini-models generate fragments of musical patterns used in output composition. Musical pattern and output generation are controlled by container for the mini-models - a host-model. General mechanism has been presented including the example of the synthesized output compositions.

  2. R&D on wireless broadband communication systems: new generation ubiquitous mobile network

    NASA Astrophysics Data System (ADS)

    Ogawa, Hiroyo

    2007-09-01

    R&D on new generation mobile network has attracted a growing interest over the world on the background of rapid market growth for 2nd and 3rd - generation cellular networks and wireless LANs/MANs. The National Institute of Information and Communications Technology (NICT) has been carried out the New Generation Mobile Network Project from April 2002 to March 2006, and has developed fundamental technologies to enable seamless and secure integration of various wireless access networks such as existing cellular networks, wireless LANs, home networks, intelligent transport systems (ITS), the Beyond-3G (B3G) cellular and other wireless access systems. From April 2006, Ubiquitous Mobile Network project focused on cognitive radio technology and integrated seamless networking technology was started. This paper overviews the achievement and the future plan of these projects.

  3. Grants Document-Generation System

    NASA Technical Reports Server (NTRS)

    Hairell, Terri; Kreymer, Lev; Martin, Greg; Sheridan, Patrick

    2008-01-01

    The Grants Document-Generation System (GDGS) software allows the generation of official grants documents for distribution to the appropriate parties. The documents are created after the selection and entry of specific data elements and clauses. GDGS is written in Cold Fusion that resides on an SQL2000 database and is housed on-site at Goddard Space Flight Center. It includes access security written around GSFC's (Goddard Space Flight Center's) LIST system, and allows for the entry of Procurement Request information necessary for the generation of the resulting Grant Award.

  4. Program status. 2nd quarter - FY 1995. Confinement systems programs

    SciTech Connect

    1995-04-18

    We conducted physics experiments: record normalized {Beta} = 4.9 achieved in VH-mode, {Beta} limits of ITER-like configurations evaluated, FWCD commissioning. The tokamak vessel was opened to atmosphere for six weeks and a number of key diagnostics for understanding the divertor were installed. The DIII-D Advisory Committee met in January to review the DIII-D program and plan. They commended us for recent progress and supported the vanadium divertor design. The U.S./Japan DIII-D steering committee met and recommended extending the agreement to the year 2000. The field work proposal for FY 96/97 was presented in Washington on March 29, 1995. A review of the DIII-D plan to install vanadium structural components as part of the new radiative divertor modification was held in Washington 31, 1995 and the panel endorsed the plans. Preliminary plans were developed with PPPL for collaborations in FY96,

  5. The Overhead System: Production, Implementation and Utilization. 2nd Edition.

    ERIC Educational Resources Information Center

    Smith, Richard E.; Pearson, Jerry D.

    This handbook is designed to help three groups: the administrator who does not have the services of a media specialist, the media specialist who wishes to expand his knowledge or skills, and the classroom teacher who recognizes the value of the overhead as a teaching tool and is looking for practical assistance. Guidelines are provided in 11…

  6. Sustainable Landscape Systems for Managing Storm Water 2nd Edition

    EPA Science Inventory

    Rain gardens are designed to capture and infiltrate rainwater in the landscape. These gardens are also called "rain water gardens". Rainwater is routed to the garden and filtered naturally by the plants and soils in the garden. This filtration process removes nutrients and poll...

  7. FABRIC FILTER SYSTEM STUDY: ANNUAL REPORT (2ND)

    EPA Science Inventory

    The report describes the second year's activities of a comprehensive EPA-funded study of a commercial fabric filter on a 350-MW low sulfur coal-fired unit at Southwestern Public Service Company's Harrington Station, near Amarillo, Texas. Special tests were performed to characteri...

  8. Power generation systems and methods

    NASA Technical Reports Server (NTRS)

    Jones, Jack A. (Inventor); Chao, Yi (Inventor)

    2011-01-01

    A power generation system includes a plurality of submerged mechanical devices. Each device includes a pump that can be powered, in operation, by mechanical energy to output a pressurized output liquid flow in a conduit. Main output conduits are connected with the device conduits to combine pressurized output flows output from the submerged mechanical devices into a lower number of pressurized flows. These flows are delivered to a location remote of the submerged mechanical devices for power generation.

  9. Efficacy and Safety of rAAV2-ND4 Treatment for Leber's Hereditary Optic Neuropathy.

    PubMed

    Wan, Xing; Pei, Han; Zhao, Min-Jian; Yang, Shuo; Hu, Wei-Kun; He, Heng; Ma, Si-Qi; Zhang, Ge; Dong, Xiao-Yan; Chen, Chen; Wang, Dao-Wen; Li, Bin

    2016-01-01

    Leber's hereditary optic neuropathy (LHON) is a mitochondrially inherited disease leading to blindness. A mitochondrial DNA point mutation at the 11778 nucleotide site of the NADH dehydrogenase subunit 4 (ND4) gene is the most common cause. The aim of this study was to evaluate the efficacy and safety of a recombinant adeno-associated virus 2 (AAV2) carrying ND4 (rAAV2-ND4) in LHON patients carrying the G11778A mutation. Nine patients were administered rAAV2-ND4 by intravitreal injection to one eye and then followed for 9 months. Ophthalmologic examinations of visual acuity, visual field, and optical coherence tomography were performed. Physical examinations included routine blood and urine. The visual acuity of the injected eyes of six patients improved by at least 0.3 log MAR after 9 months of follow-up. In these six patients, the visual field was enlarged but the retinal nerve fibre layer remained relatively stable. No other outcome measure was significantly changed. None of the nine patients had local or systemic adverse events related to the vector during the 9-month follow-up period. These findings support the feasible use of gene therapy for LHON. PMID:26892229

  10. Improvement of a plasma uniformity of the 2nd ion source of KSTAR neutral beam injector

    NASA Astrophysics Data System (ADS)

    Jeong, S. H.; Kim, T. S.; Lee, K. W.; Chang, D. H.; In, S. R.; Bae, Y. S.

    2014-02-01

    The 2nd ion source of KSTAR (Korea Superconducting Tokamak Advanced Research) NBI (Neutral Beam Injector) had been developed and operated since last year. A calorimetric analysis revealed that the heat load of the back plate of the ion source is relatively higher than that of the 1st ion source of KSTAR NBI. The spatial plasma uniformity of the ion source is not good. Therefore, we intended to identify factors affecting the uniformity of a plasma density and improve it. We estimated the effects of a direction of filament current and a magnetic field configuration of the plasma generator on the plasma uniformity. We also verified that the operation conditions of an ion source could change a uniformity of the plasma density of an ion source.

  11. Improvement of a plasma uniformity of the 2nd ion source of KSTAR neutral beam injector.

    PubMed

    Jeong, S H; Kim, T S; Lee, K W; Chang, D H; In, S R; Bae, Y S

    2014-02-01

    The 2nd ion source of KSTAR (Korea Superconducting Tokamak Advanced Research) NBI (Neutral Beam Injector) had been developed and operated since last year. A calorimetric analysis revealed that the heat load of the back plate of the ion source is relatively higher than that of the 1st ion source of KSTAR NBI. The spatial plasma uniformity of the ion source is not good. Therefore, we intended to identify factors affecting the uniformity of a plasma density and improve it. We estimated the effects of a direction of filament current and a magnetic field configuration of the plasma generator on the plasma uniformity. We also verified that the operation conditions of an ion source could change a uniformity of the plasma density of an ion source. PMID:24593593

  12. The Second Stellar Spectrum and the non-LTE Problem of the 2nd Kind

    NASA Astrophysics Data System (ADS)

    Trujillo Bueno, Javier

    2009-09-01

    This paper presents an overview of the radiative transfer problem of calculating the spectral line intensity and polarization that emerges from a (generally magnetized) astrophysical plasma composed of atoms and molecules whose excitation state is significantly influenced by radiative transitions produced by an anisotropic radiation field. The numerical solution of this non-LTE problem of the 2nd kind is facilitating the physical understanding of the second solar spectrum and the exploration of the complex magnetism of the extended solar atmosphere, but much more could be learned if high-sensitivity polarimeters were developed also for the present generation of night-time telescopes. Interestingly, I find that the population ratio between the levels of some resonance line transitions can be efficiently modulated by the inclination of a weak magnetic field when the anisotropy of the incident radiation is significant, something that could provide a new diagnostic tool in astrophysics.

  13. [Microsurgical 2nd toe transfer for catastrophic hand reconstruction].

    PubMed

    Placer, A; Lozano, Ja

    2007-01-01

    The correct reconstruction of the catastrophic hand requires complex surgical techniques. The microsurgical transference of a toe is indicated when all other reconstructive options are shown to be useless for the reconstruction of the required clamp function. In this clinical note we set out the case of a 32 year old man, who came to our accident and emergency department after suffering a traffic accident. After exploration the diagnosis was that of catastrophic left hand, among other policontusions. Urgent surgery was carried out, saving the maximum possible viable structures. The immediate result of this surgery was a hand with 1st, 4th and 5th functional fingers. As the essential clamp function between the 1st and 4th or 5th fingers was not totally satisfactory, we decided to reconstruct the 3rd finger of his hand with his ipsilateral 2nd toe. All pertinent studies to determine vascularisation of the flap were carried out in planning the surgery, and the microsurgical transfer was then realized, which was successful. Today, after a suitable rehabilitation, the patient has recovered a satisfactory function of heavy and fine clamp in the operated hand. Toe to hand transfer is a good option for finger reconstruction and its function. Rehabilitation is the key to functional recovery. PMID:18227902

  14. PREFACE: 2nd International Symposium "Optics and its Applications"

    NASA Astrophysics Data System (ADS)

    Calvo, Maria L.; Dolganova, Irina N.; Gevorgyan, Narine; Guzman, Angela; Papoyan, Aram; Sarkisyan, Hayk; Yurchenko, Stanislav

    2016-01-01

    The ICTP smr2633: 2nd International Symposium "Optics and its Applications" (OPTICS-2014) http://indico.ictp.it/event/a13253/ was held in Yerevan and Ashtarak, Armenia, on 1-5 September 2014. The Symposium was organized by the Abdus Salam International Center for Theoretical Physics (ICTP) with the collaboration of the SPIE Armenian Student Chapter, the Armenian TC of ICO, the Russian-Armenian University (RAU), the Institute for Physical Research of the National Academy of Sciences of Armenia (IPR of NAS), the Greek-Armenian industrial company LT-Pyrkal, and the Yerevan State University (YSU). The Symposium was co-organized by the BMSTU SPIE & OSA student chapters. The International Symposium OPTICS-2014 was dedicated to the 50th anniversary of the Abdus Salam International Center for Theoretical Physics. This symposium "Optics and its Applications" was the First Official ICTP Scientific Event in Armenia. The presentations at OPTICS-2014 were centered on these topics: optical properties of nanostructures; quantum optics & information; singular optics and its applications; laser spectroscopy; strong field optics; nonlinear & ultrafast optics; photonics & fiber optics; optics of liquid crystals; and mathematical methods in optics.

  15. APTWG: 2nd Asia-Pacific Transport Working Group Meeting

    NASA Astrophysics Data System (ADS)

    Dong, J. Q.; Shi, Y. J.; Tamura, N.; Jhang, Hogun; Watanabe, T.-H.; Ding, X. T.

    2013-02-01

    This conference report summarizes the contributions to and discussions at the 2nd Asia-Pacific Transport Working Group Meeting held in Chengdu, China, from 15 to 18 May 2012. The topics of the meeting were organized under five main headings: momentum transport, non-locality in transport, edge turbulence and L-H transition, three-dimensional effects on transport physics, and particle, momentum and heat pinches. It is found that lower hybrid wave and ion cyclotron wave induce co-current rotation while electron cyclotron wave induces counter-current rotation. A four-stage imaging for low (L) to high (H) confinement transition gradually emerges and a more detailed verification is urgently expected. The new edge-localized modes mitigation technique with supersonic molecular beam injection was approved to be effective to some extent on HL-2A and KSTAR. It is also found that low collisionality, trapped electron mode to ion temperature gradient transition (or transition of higher to lower density and temperature gradients), fuelling and lithium coating are in favour of inward pinch of particles in tokamak plasmas.

  16. Handbook of industrial and hazardous wastes treatment. 2nd ed.

    SciTech Connect

    Lawrence Wang; Yung-Tse Hung; Howard Lo; Constantine Yapijakis

    2004-06-15

    This expanded Second Edition offers 32 chapters of industry- and waste-specific analyses and treatment methods for industrial and hazardous waste materials - from explosive wastes to landfill leachate to wastes produced by the pharmaceutical and food industries. Key additional chapters cover means of monitoring waste on site, pollution prevention, and site remediation. Including a timely evaluation of the role of biotechnology in contemporary industrial waste management, the Handbook reveals sound approaches and sophisticated technologies for treating: textile, rubber, and timber wastes; dairy, meat, and seafood industry wastes; bakery and soft drink wastes; palm and olive oil wastes; pesticide and livestock wastes; pulp and paper wastes; phosphate wastes; detergent wastes; photographic wastes; refinery and metal plating wastes; and power industry wastes. This final chapter, entitled 'Treatment of power industry wastes' by Lawrence K. Wang, analyses the stream electric power generation industry, where combustion of fossil fuels coal, oil, gas, supplies heat to produce stream, used then to generate mechanical energy in turbines, subsequently converted to electricity. Wastes include waste waters from cooling water systems, ash handling systems, wet-scrubber air pollution control systems, and boiler blowdown. Wastewaters are characterized and waste treatment by physical and chemical systems to remove pollutants is presented. Plant-specific examples are provided.

  17. AUTO: Automatic script generation system

    NASA Astrophysics Data System (ADS)

    Granacki, John; Hom, Ivan; Kazi, Tauseef

    1993-11-01

    This technical manual describes an automatic script generation system (Auto) for guiding the physical design of a printed circuit board. Auto accepts a printed circuit board design as specified in a netlist and partslist and returns a script to automatically provide all the necessary commands and file specifications required by Harris EDA's Finesse CAD system for placing and routing the printed circuit board. Auto insulates the designer from learning the details of commercial CAD systems, allows designers to modify the script for customized design entry, and performs format and completeness checking of the design files. This technical manual contains a complete tutorial/design example describing how to use the Auto system and also contains appendices describing the format of files required by the Finesse CAD system.

  18. Highlights of the 2 nd Bioinformatics Student Symposium by ISCB RSG-UK

    PubMed Central

    White, Benjamen; Fatima, Vayani; Fatima, Nazeefa; Das, Sayoni; Rahman, Farzana; Hassan, Mehedi

    2016-01-01

    Following the success of the 1 st Student Symposium by ISCB RSG-UK, a 2 nd Student Symposium took place on 7 th October 2015 at The Genome Analysis Centre, Norwich, UK. This short report summarizes the main highlights from the 2 nd Bioinformatics Student Symposium. PMID:27239284

  19. Examples to Accompany "Descriptive Cataloging of Rare Books, 2nd Edition."

    ERIC Educational Resources Information Center

    Association of Coll. and Research Libraries, Chicago, IL.

    This book is intended to be used with "Descriptive Cataloging of Rare Books," 2nd edition (DCRB) as an illustrative aid to catalogers and others interested in or needing to interpret rare book cataloging. As such, it is to be used in conjunction with the rules it illustrates, both in DCRB and in "Anglo-American Cataloging Rules," 2nd edition…

  20. Development of a Hydrologic Characterization Technology for Fault Zones Phase II 2nd Report

    SciTech Connect

    Karasaki, Kenzi; Doughty, Christine; Gasperikova, Erika; Peterson, John; Conrad, Mark; Cook, Paul; Tiemi, Onishi

    2011-03-31

    This is the 2nd report on the three-year program of the 2nd phase of the NUMO-LBNL collaborative project: Development of Hydrologic Characterization Technology for Fault Zones under NUMO-DOE/LBNL collaboration agreement. As such, this report is a compendium of the results by Kiho et al. (2011) and those by LBNL.

  1. A new generation of stationary digital breast tomosynthesis system with wider angular span and faster scanning time

    NASA Astrophysics Data System (ADS)

    Calliste, Jabari; Wu, Gongting; Laganis, Philip E.; Spronk, Derrek; Jafari, Houman; Olson, Kyle; Gao, Bo; Lee, Yueh Z.; Zhou, Otto; Lu, Jianping

    2016-03-01

    We have developed a clinically ready first generation stationary breast tomosynthesis system (s-DBT). In the s-DBT system, focal spot blur associated with x-ray source motion is completely eliminated, allowing for rapid acquisition of projection images over a larger angular span without changing the acquisition time. In the phantom studies the 1st generation s-DBT system has demonstrated 30% higher spatial resolution than the corresponding continuous motion DBT systems. The system is currently being evaluated for its diagnostic performance in 100 patient clinical evaluation against FFDM. Initial results indicate that the s­-DBT system can produce increased lesion conspicuity and comparable MC visibility. However due to x­-ray flux limitations, certain large size patients have to be excluded. Recent studies have shown that increasing the angular span beyond 30° can be beneficial for enhanced depth resolution. We report the preliminary characterization of the 2nd generation s-­DBT system with a new CNT x-­ray source array, increased tube flux and a larger angular span. Increasing x-ray tube flux allows for a larger patient population and dual energy imaging. Results indicate that the system delivers more than twice the flux, allowing for imaging of all size patients with acquisition time of 2­-4 seconds. A 7° increase in angular span over 1st generation decreased the ASF by 37%. Additionally, the 2nd generation s-DBT system utilizing a specific AFVR reconstruction method resulted in a 92% increase in the in plane resolution over CM DBT system, and a 37% increase in spatial resolution over the 1st generation s--DBT system.

  2. Solar Thermal Electricity Generating System

    NASA Astrophysics Data System (ADS)

    Mishra, Sambeet; Tripathy, Pratyasha

    2012-08-01

    A Solar Thermal Electricity generating system also known as Solar Thermal Power plant is an emerging renewable energy technology, where we generate the thermal energy by concentrating and converting the direct solar radiationat medium/high temperature (300∫C ñ 800∫C). The resulting thermal energy is then used in a thermodynamic cycleto produce electricity, by running a heat engine, which turns a generator to make electricity. Solar thermal power is currently paving the way for the most cost-effective solar technology on a large scale and is heading to establish a cleaner, pollution free and secured future. Photovoltaic (PV) and solar thermal technologies are two main ways of generating energy from the sun, which is considered the inexhaustible source of energy. PV converts sunlight directly into electricity whereas in Solar thermal technology, heat from the sun's rays is concentrated to heat a fluid, whose steam powers a generator that produces electricity. It is similar to the way fossil fuel-burning power plants work except that the steam is produced by the collected heat rather than from the combustion of fossil fuels. In order to generate electricity, five major varieties of solar thermal technologies used are:* Parabolic Trough Solar Electric Generating System (SEGS).* Central Receiver Power Plant.* Solar Chimney Power Plant.* Dish Sterling System.* Solar Pond Power Plant.Most parts of India,Asia experiences a clear sunny weather for about 250 to 300 days a year, because of its location in the equatorial sun belt of the earth, receiving fairly large amount of radiation as compared to many parts of the world especially Japan, Europe and the US where development and deployment of solar technologies is maximum.Whether accompanied with this benefit or not, usually we have to concentrate the solar radiation in order to compensate for the attenuation of solar radiation in its way to earthís surface, which results in from 63,2 GW/m2 at the Sun to 1 kW/m2 at

  3. PREFACE: 2nd National Conference on Nanotechnology 'NANO 2008'

    NASA Astrophysics Data System (ADS)

    Czuba, P.; Kolodziej, J. J.; Konior, J.; Szymonski, M.

    2009-03-01

    This issue of Journal of Physics: Conference Series contains selected papers presented at the 2nd National Conference on Nanotechnology 'NANO2008', that was held in Kraków, Poland, 25-28 June 2008. It was organized jointly by the Polish Chemical Society, Polish Physical Society, Polish Vacuum Society, and the Centre for Nanometer-scale Science and Advanced Materials (NANOSAM) of the Jagiellonian University. The meeting presentations were categorized into the following topics: 1. Nanomechanics and nanotribology 2. Characterization and manipulation in nanoscale 3. Quantum effects in nanostructures 4. Nanostructures on surfaces 5. Applications of nanotechnology in biology and medicine 6. Nanotechnology in education 7. Industrial applications of nanotechnology, presentations of the companies 8. Nanoengineering and nanomaterials (international sessions shared with the fellows of Maria-Curie Host Fellowships within the 6th FP of the European Community Project 'Nano-Engineering for Expertise and Development, NEED') 9. Nanopowders 10. Carbon nanostructures and nanosystems 11. Nanoelectronics and nanophotonics 12. Nanomaterials in catalysis 13. Nanospintronics 14. Ethical, social, and environmental aspects of nanotechnology The Conference was attended by 334 participants. The presentations were delivered as 7 invited plenary lectures, 25 invited topical lectures, 78 oral and 108 poster contributions. Only 1/6 of the contributions presented during the Conference were submitted for publication in this Proceedings volume. From the submitted material, this volume of Journal of Physics: Conference Series contains 37 articles that were positively evaluated by independent referees. The Organizing Committee gratefully acknowledges all these contributions. We also thank all the referees of the papers submitted for the Proceedings for their timely and thorough work. We would like to thank all members of the National Program Committee for their work in the selection process of

  4. Physical properties of double perovskite-type barium neodymium osmate Ba{sub 2}NdOsO{sub 6}

    SciTech Connect

    Wakeshima, Makoto; Hinatsu, Yukio; Ohoyama, Kenji

    2013-01-15

    The crystal, magnetic structures and physical properties of the double perovskite-type barium neodymium osmate Ba{sub 2}NdOsO{sub 6} are investigated through powder X-ray and neutron diffraction, electrical conductivity, magnetic susceptibility, and specific heat measurements. The Rietveld analysis reveals that the Nd and Os ions are arranged with regularity over the six-coordinate B sites in a distorted perovskite ABO{sub 3} framework. The monoclinic crystal structure described by space group P2{sub 1}/n (tilt system a{sup -}a{sup -}c{sup +}) becomes more distorted with decreasing temperature from 300 K down to 2.5 K. This compound shows a long-range antiferromagnetic ordering of Os{sup 5+} below 65 K. An antiferromagnetic ordering of Nd{sup 3+} also occurs at lower temperatures ({approx}20 K). The magnetic structure is of Type I and the magnetic moments of Nd{sup 3+} and Os{sup 5+} ions are in the same direction in the ab-plane. - Graphical Abstract: The Magnetic structure of Ba{sub 2}NdOsO{sub 6} is of Type I, and the magnetic moments of the Nd{sup 3+} and Os{sup 5+} ions are in the same direction in the ab-plane. Highlights: Black-Right-Pointing-Pointer Crystal structures of Ba{sub 2}NdOsO{sub 6} are determined to be monoclinic below 300 K. Black-Right-Pointing-Pointer Its electrical resistivity shows a Mott variable-range hopping behavior with localized carriers. Black-Right-Pointing-Pointer An antiferromagnetic ordering of the Os{sup 5+}moment occurs at 65 K. Black-Right-Pointing-Pointer The magnetic structure of Ba{sub 2}NdOsO{sub 6} is determined to be of Type I.

  5. 2nd interface between ecology and land development in California

    USGS Publications Warehouse

    Keeley, Jon E.; Baer-Keeley, Melanie; Fortheringham, C.J.

    2000-01-01

    The 2nd Interface Between Ecology and Land Development Conference was held in association with Earth Day 1997, five years after the first Interface Conference. Rapid population growth in California has intensified the inevitable conflict between land development and preservation of natural ecosystems. Sustainable development requires wise use of diminishing natural resources and, where possible, restoration of damaged landscapes. These Earth Week Celebrations brought together resource managers, scientists, politicians, environmental consultants, and concerned citizens in an effort to improve the communication necessary to maintain our natural biodiversity, ecosystem processes and general quality of life. As discussed by our keynote speaker, Michael Soule, the best predictor of habitat loss is population growth and nowhere is this better illustrated than in California. As urban perimeters expand, the interface between wildlands and urban areas increases. Few problems are more vexing than how to manage the fire prone ecosystems indigenous to California at this urban interface. Today resource managers face increasing challenges of dealing with this problem and the lead-off section of the proceedings considers both the theoretical basis for making decisions related to prescribed burning and the practical application. Habitat fragmentation is an inevitable consequence of development patterns with significant impacts on animal and plant populations. Managers must be increasingly resourceful in dealing with problems of fragmentation and the often inevitable consequences, including susceptibility to invasive oganisms. One approach to dealing with fragmentation problems is through careful landplanning. California is the national leader in the integration of conservation and economics. On Earth Day 1991, Governor Pete Wilson presented an environmental agenda that promised to create between land owners and environmentalists, agreements that would guarantee the protection of

  6. NEXT GENERATION TURBINE SYSTEM STUDY

    SciTech Connect

    Frank Macri

    2002-02-28

    Rolls-Royce has completed a preliminary design and marketing study under a Department of Energy (DOE) cost shared contract (DE-AC26-00NT40852) to analyze the feasibility of developing a clean, high efficiency, and flexible Next Generation Turbine (NGT) system to meet the power generation market needs of the year 2007 and beyond. Rolls-Royce evaluated the full range of its most advanced commercial aerospace and aeroderivative engines alongside the special technologies necessary to achieve the aggressive efficiency, performance, emissions, economic, and flexibility targets desired by the DOE. Heavy emphasis was placed on evaluating the technical risks and the economic viability of various concept and technology options available. This was necessary to ensure the resulting advanced NGT system would provide extensive public benefits and significant customer benefits without introducing unacceptable levels of technical and operational risk that would impair the market acceptance of the resulting product. Two advanced cycle configurations were identified as offering significant advantages over current combined cycle products available in the market. In addition, balance of plant (BOP) technologies, as well as capabilities to improve the reliability, availability, and maintainability (RAM) of industrial gas turbine engines, have been identified. A customer focused survey and economic analysis of a proposed Rolls-Royce NGT product configuration was also accomplished as a part of this research study. The proposed Rolls-Royce NGT solution could offer customers clean, flexible power generation systems with very high efficiencies, similar to combined cycle plants, but at a much lower specific cost, similar to those of simple cycle plants.

  7. 1st- and 2nd-order motion and texture resolution in central and peripheral vision

    NASA Technical Reports Server (NTRS)

    Solomon, J. A.; Sperling, G.

    1995-01-01

    STIMULI. The 1st-order stimuli are moving sine gratings. The 2nd-order stimuli are fields of static visual texture, whose contrasts are modulated by moving sine gratings. Neither the spatial slant (orientation) nor the direction of motion of these 2nd-order (microbalanced) stimuli can be detected by a Fourier analysis; they are invisible to Reichardt and motion-energy detectors. METHOD. For these dynamic stimuli, when presented both centrally and in an annular window extending from 8 to 10 deg in eccentricity, we measured the highest spatial frequency for which discrimination between +/- 45 deg texture slants and discrimination between opposite directions of motion were each possible. RESULTS. For sufficiently low spatial frequencies, slant and direction can be discriminated in both central and peripheral vision, for both 1st- and for 2nd-order stimuli. For both 1st- and 2nd-order stimuli, at both retinal locations, slant discrimination is possible at higher spatial frequencies than direction discrimination. For both 1st- and 2nd-order stimuli, motion resolution decreases 2-3 times more rapidly with eccentricity than does texture resolution. CONCLUSIONS. (1) 1st- and 2nd-order motion scale similarly with eccentricity. (2) 1st- and 2nd-order texture scale similarly with eccentricity. (3) The central/peripheral resolution fall-off is 2-3 times greater for motion than for texture.

  8. Heat engine generator control system

    DOEpatents

    Rajashekara, K.; Gorti, B.V.; McMullen, S.R.; Raibert, R.J.

    1998-05-12

    An electrical power generation system includes a heat engine having an output member operatively coupled to the rotor of a dynamoelectric machine. System output power is controlled by varying an electrical parameter of the dynamoelectric machine. A power request signal is related to an engine speed and the electrical parameter is varied in accordance with a speed control loop. Initially, the sense of change in the electrical parameter in response to a change in the power request signal is opposite that required to effectuate a steady state output power consistent with the power request signal. Thereafter, the electrical parameter is varied to converge the output member speed to the speed known to be associated with the desired electrical output power. 8 figs.

  9. Heat engine generator control system

    DOEpatents

    Rajashekara, Kaushik; Gorti, Bhanuprasad Venkata; McMullen, Steven Robert; Raibert, Robert Joseph

    1998-01-01

    An electrical power generation system includes a heat engine having an output member operatively coupled to the rotor of a dynamoelectric machine. System output power is controlled by varying an electrical parameter of the dynamoelectric machine. A power request signal is related to an engine speed and the electrical parameter is varied in accordance with a speed control loop. Initially, the sense of change in the electrical parameter in response to a change in the power request signal is opposite that required to effectuate a steady state output power consistent with the power request signal. Thereafter, the electrical parameter is varied to converge the output member speed to the speed known to be associated with the desired electrical output power.

  10. PREFACE: 2nd Workshop on Germanium Detectors and Technologies

    NASA Astrophysics Data System (ADS)

    Abt, I.; Majorovits, B.; Keller, C.; Mei, D.; Wang, G.; Wei, W.

    2015-05-01

    The 2nd workshop on Germanium (Ge) detectors and technology was held at the University of South Dakota on September 14-17th 2014, with more than 113 participants from 8 countries, 22 institutions, 15 national laboratories, and 8 companies. The participants represented the following big projects: (1) GERDA and Majorana for the search of neutrinoless double-beta decay (0νββ) (2) SuperCDMS, EDELWEISS, CDEX, and CoGeNT for search of dark matter; (3) TEXONO for sub-keV neutrino physics; (4) AGATA and GRETINA for gamma tracking; (5) AARM and others for low background radiation counting; (5) as well as PNNL and LBNL for applications of Ge detectors in homeland security. All participants have expressed a strong desire on having better understanding of Ge detector performance and advancing Ge technology for large-scale applications. The purpose of this workshop was to leverage the unique aspects of the underground laboratories in the world and the germanium (Ge) crystal growing infrastructure at the University of South Dakota (USD) by brining researchers from several institutions taking part in the Experimental Program to Stimulate Competitive Research (EPSCoR) together with key leaders from international laboratories and prestigious universities, working on the forefront of the intensity to advance underground physics focusing on the searches for dark matter, neutrinoless double-beta decay (0νββ), and neutrino properties. The goal of the workshop was to develop opportunities for EPSCoR institutions to play key roles in the planned world-class research experiments. The workshop was to integrate individual talents and existing research capabilities, from multiple disciplines and multiple institutions, to develop research collaborations, which includes EPSCor institutions from South Dakota, North Dakota, Alabama, Iowa, and South Carolina to support multi-ton scale experiments for future. The topic areas covered in the workshop were: 1) science related to Ge

  11. Wave activated power generation system

    SciTech Connect

    Ono, Y.

    1983-08-09

    A wave activated power generation system of the float type is disclosed, comprising at least one piston-cylinder device having an anchored cylinder and a piston slidable in the cylinder and cooperating with the cylinder to form a pumping chamber above the piston and a low pressure chamber below the piston. The cylinder has an intake port and an exhaust port both formed at an upper port thereof to communicate with the pumping chamber and each provided with a check valve. A float is connected through a cable to the piston of the piston- cylinder device. A pair of fluid storages are connected to the intake port and the exhaust port of the pumping chamber, respectively. A waterwheel generator is driven by the fluid flowing from one of the fluid storages to another. A pressure regulating device is connected to the low pressure chamber so as to maintain the low pressure chamber at a pressure lower than the pressure in the pumping chamber, the difference in pressure ceaselessly applying a downward force on the piston to keep the cable in a tensed condition.

  12. Technetium-99m generator system

    DOEpatents

    Mirzadeh, S.; Knapp, F.F. Jr.; Collins, E.D.

    1998-06-30

    A {sup 99}Mo/{sup 99m}Tc generator system includes a sorbent column loaded with a composition containing {sup 99}Mo. The sorbent column has an effluent end in fluid communication with an anion-exchange column for concentrating {sup 99m}Tc eluted from the sorbent column. A method of preparing a concentrated solution of {sup 99m}Tc includes the general steps of: (a) providing a sorbent column loaded with a composition containing {sup 99}Mo, the sorbent column having an effluent end in fluid communication with an anion-exchange column; (b) eluting the sorbent column with a salt solution to elute {sup 99m}Tc from the sorbent and to trap and concentrate the eluted {sup 99m}Tc on the ion-exchange column; and (c) eluting the concentrated {sup 99m}Tc from the ion-exchange column with a solution comprising a reductive complexing agent. 1 fig.

  13. Technetium-99m generator system

    DOEpatents

    Mirzadeh, Saed; Knapp, Jr., Furn F.; Collins, Emory D.

    1998-01-01

    A .sup.99 Mo/.sup.99m Tc generator system includes a sorbent column loaded with a composition containing .sup.99 Mo. The sorbent column has an effluent end in fluid communication with an anion-exchange column for concentrating .sup.99m Tc eluted from the sorbent column. A method of preparing a concentrated solution of .sup.99m Tc includes the general steps of: a. providing a sorbent column loaded with a composition containing .sup.99 Mo, the sorbent column having an effluent end in fluid communication with an anion-exchange column; b. eluting the sorbent column with a salt solution to elute .sup.99m Tc from the sorbent and to trap and concentrate the eluted .sup.99m Tc on the ion-exchange column; and c. eluting the concentrated .sup.99m Tc from the ion-exchange column with a solution comprising a reductive complexing agent.

  14. VIEW SOUTH/SOUTHEAST LOOKING DOWN ON 2ND AQUEDUCT AND 1ST AQUEDUCT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    VIEW SOUTH/SOUTHEAST LOOKING DOWN ON 2ND AQUEDUCT AND 1ST AQUEDUCT CASCADES TOWARDS FILTRATION PLANT AND LOS ANGELES RESERVOIR - Los Angeles Aqueduct, Cascades Structures, Los Angeles, Los Angeles County, CA

  15. MAGAZINE E30. VIEW FROM BETWEEN 1ST AND 2ND BLAST WALL ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    MAGAZINE E-30. VIEW FROM BETWEEN 1ST AND 2ND BLAST WALL LOOKING TO THE REAR OF THE MAGAZINE. - Naval Magazine Lualualei, Waikele Branch, Tunnel Magazine Type, Waikakalaua & Kipapa Gulches, Pearl City, Honolulu County, HI

  16. 22. MILL NO. 1, 2nd FLOOR, LIGHT TABLES AND KNITTING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    22. MILL NO. 1, 2nd FLOOR, LIGHT TABLES AND KNITTING MACHINE. LIGHT TABLE USED TO CHECK FOR CLOTH DEFECTS. - Prattville Manufacturing Company, Number One, 242 South Court Street, Prattville, Autauga County, AL

  17. 12. Bldg #13, 2nd floor, interior stone walls w/windows and ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    12. Bldg #13, 2nd floor, interior stone walls w/windows and bent pipe thru wall L and light bulbs in ceiling, to NE - Lawrence Machine Shop, Building No. 13, Union & Canal Streets, Lawrence, Essex County, MA

  18. 4. VIEW WEST, WEST SIDE, SHOWING CHANNELS 1ST AND 2ND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    4. VIEW WEST, WEST SIDE, SHOWING CHANNELS 1ST AND 2ND VERTICAL BRACED DOUBLE ANGLES, DIAGONAL BRACING AND CROSS BRACED RAILING - Thirty-Sixth Street Bridge, Spanning Rabbit River, Hamilton, Allegan County, MI

  19. 2nd U.S. Case of Bacteria Resistant to Last-Resort Antibiotic

    MedlinePlus

    ... news/fullstory_159807.html 2nd U.S. Case of Bacteria Resistant to Last-Resort Antibiotic Scientists concerned it ... the United States who was infected with a bacteria that is resistant to an antibiotic of last ...

  20. Front elevation of Rostrum with 2nd Division American Expeditionary Force ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Front elevation of Rostrum with 2nd Division American Expeditionary Force Monument in foreground, view to northwest - Cypress Hills National Cemetery, Jamaica Avenue Unit, 625 Jamaica Avenue, Brooklyn, Kings County, NY

  1. 37. MILL NO. 2, 2nd FLOOR, CLOSE SHOT OF 2 ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    37. MILL NO. 2, 2nd FLOOR, CLOSE SHOT OF 2 CREEL MACHINES, WHICH FEED YARN INTO KNITTING MACHINES. - Prattville Manufacturing Company, Number One, 242 South Court Street, Prattville, Autauga County, AL

  2. 73. VIEW OF NORTHWEST SIDE OF 2ND TEE, LOOKING NORTHWEST, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    73. VIEW OF NORTHWEST SIDE OF 2ND TEE, LOOKING NORTHWEST, SHOWING STEPPED PLATFORM, BENCHES, AND LIGHT STANDARDS - Huntington Beach Municipal Pier, Pacific Coast Highway at Main Street, Huntington Beach, Orange County, CA

  3. 21. VIEW FROM INTERIOR OF 2ND FLOOR ARCHED WINDOW WITH ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    21. VIEW FROM INTERIOR OF 2ND FLOOR ARCHED WINDOW WITH HOLLOW STEEL SASH AND POLISHED PLATE WIRE GLASS. THIS WINDOW IS AT THE FRONT OF THE BUILDING. - Pacific Telephone & Telegraph Company Building, 1519 Franklin Street, Oakland, Alameda County, CA

  4. The 2nd-order Post-Newtonian Orbit Equation of Light

    NASA Astrophysics Data System (ADS)

    Xiao, Yu; Fei, Bao-Jun; Sun, Wei-Jin; Ji, Cheng-Xiang

    2008-10-01

    Based on the 2nd-order post-Newtonian approximation under the DSX frame of the general relativity theory, the 2nd-order post-Newtonian orbital equation of light in the axis-symmetrical stationary spacetime is derived, and from this, the angle of deflection of light propagating in the equatorial plane is derived. The obtained results are consistent with those of the Schwarzchild and Kerr metrics within the limits of measuring precision.

  5. The Goodrich 3rd generation DB-110 system: successful flight test on the F-16 aircraft

    NASA Astrophysics Data System (ADS)

    Lange, Davis; Iyengar, Mrinal; Maver, Larry; Dyer, Gavin; Francis, John

    2007-04-01

    The 3rd Generation Goodrich DB-110 system provides users with a three (3) field-of-view high performance Airborne Reconnaissance capability that incorporates a dual-band day and nighttime imaging sensor, a real time recording and a real time data transmission capability to support long range, medium range, and short range standoff and over-flight mission scenarios, all within a single pod. Goodrich developed their 3rd Generation Airborne Reconnaissance Pod for operation on a range of aircraft types including F-16, F-15, F-18, Euro-fighter and older aircraft such as the F-4, F-111, Mirage and Tornado. This system upgrades the existing, operationally proven, 2nd generation DB-110 design with enhancements in sensor resolution, flight envelope and other performance improvements. Goodrich recently flight tested their 3rd Generation Reconnaissance System on a Block 52 F-16 aircraft with first flight success and excellent results. This paper presents key highlights of the system and presents imaging results from flight test.

  6. Informed maintenance for next generation reusable launch systems

    NASA Astrophysics Data System (ADS)

    Fox, Jack J.; Gormley, Thomas J.

    2001-03-01

    system software. This paper will summarize NASA's long-term strategy, development, and implementation plans for Informed Maintenance for next generation RLVs. This will be done through a convergence into a single IM vision the work being performed throughout NASA, industry and academia. Additionally, a current status of IM development throughout NASA programs such as the Space Shuttle, X-33, X-34 and X-37 will be provided and will conclude with an overview of near-term work that is being initiated in FY00 to support NASA's 2 nd Generation Reusable Launch Vehicle Program.

  7. Informed maintenance for next generation space transportation systems

    NASA Astrophysics Data System (ADS)

    Fox, Jack J.

    2001-02-01

    system software. This paper will summarize NASA's long-term strategy, development, and implementation plans for Informed Maintenance for next generation RLVs. This will be done through a convergence into a single IM vision the work being performed throughout NASA, industry and academia. Additionally, a current status of IM development throughout NASA programs such as the Space Shuttle, X-33, X-34 and X-37 will be provided and will conclude with an overview of near-term work that is being initiated in FY00 to support NASA's 2nd Generation Reusable Launch Vehicle Program. .

  8. Severe weather phenomena: SQUALL LINES The case of July 2nd 2009

    NASA Astrophysics Data System (ADS)

    Paraschivescu, Mihnea; Tanase, Adrian

    2010-05-01

    The wind intensity plays an important role, among the dangerous meteorological phenomena, to produce negative effects on the economy and the social activities, particularly when the wind is about to turn into a storm. During the past years one can notice an increase of wind frequency and intensity due to climate changes and, consequently, as a result of the extreme meteorological phenomena not only on a planetary level but also on a regional one. Although dangerous meteorological phenomena cannot be avoided, since they are natural, nevertheless they can be anticipated and decision making institutions and mass media can be informed. This is the reason why, in this paper, we set out to identify the synoptic conditions that led to the occurrence of the severe storm case in Bucharest on July 2nd, 2009, as well as the matrices that generate such cases. At the same time we sought to identify some indications evidence especially from radar data so as to lead to the improvement of the time interval between the nowcasting warning and the actual occurrence of the phenomenon.

  9. Growth, structure, and optical properties of a self-activated crystal: Na2Nd2O(BO3)2

    NASA Astrophysics Data System (ADS)

    Shan, Faxian; Zhang, Guochun; Yao, Jiyong; Xu, Tianxiang; Zhang, Xinyuan; Fu, Ying; Wu, Yicheng

    2015-08-01

    A self-activated crystal Na2Nd2O(BO3)2 has been grown from the Na2O-Nd2O3-B2O3-NaF system. Its structure was determined by single crystal X-ray diffraction, and verified by infrared spectrum and inductively coupled plasma optical emission spectrometry. Na2Nd2O(BO3)2 crystallizes in the monoclinic crystal system, space group P21/c with unit-cell parameters a = 10.804 Å, b = 6.421 Å, c = 10.450 Å, β = 117.95°, Z = 4, and V = 640.4 Å3. Its absorption and emission spectra were measured at room temperature. Based on the absorption spectrum, the spontaneous transition probabilities, fluorescence branch ratio, and the radiation lifetime of 4F3/2 state were calculated. The emission properties under the 355 nm excitation were also evaluated. The electronic structure of Na2Nd2O(BO3)2 was calculated by the first-principles method. The obtained results show that Na2Nd2O(BO3)2 may be a promising microchip laser material.

  10. Entropy Generation in Regenerative Systems

    NASA Technical Reports Server (NTRS)

    Kittel, Peter

    1995-01-01

    Heat exchange to the oscillating flows in regenerative coolers generates entropy. These flows are characterized by oscillating mass flows and oscillating temperatures. Heat is transferred between the flow and heat exchangers and regenerators. In the former case, there is a steady temperature difference between the flow and the heat exchangers. In the latter case, there is no mean temperature difference. In this paper a mathematical model of the entropy generated is developed for both cases. Estimates of the entropy generated by this process are given for oscillating flows in heat exchangers and in regenerators. The practical significance of this entropy is also discussed.

  11. Radioisotope thermoelectric generator transport trailer system

    NASA Astrophysics Data System (ADS)

    Ard, Kevin E.; King, David A.; Leigh, Harley; Satoh, Juli A.

    1995-01-01

    The Radioisotope Thermoelectric Generator (RTG) Transportation System, designated as System 100, comprises four major systems. The four major systems are designated as the Packaging System (System 120), Trailer System (System 140), Operations and Ancillary Equipment System (System 160), and Shipping and Receiving Facility Transport System (System 180). Packaging System (System 120), including the RTG packaging is licensed (regulatory) hardware; it is certified by the U.S. Department of Energy to be in accordance with Title 10, Code of Federal Regulations, Part 71 (10 CFR 71). System 140, System 160, and System 180 are nonlicensed (nonregulatory) hardware.

  12. Radioisotope thermoelectric generator transport trailer system

    SciTech Connect

    Ard, K.E.; King, D.A.; Leigh, H.; Satoh, J.A.

    1995-01-20

    The Radioisotope Thermoelectric Generator (RTG) Transportation System, designated as System 100, comprises four major systems. The four major systems are designated as the Packaging System (System 120), Trailer System (System 140), Operations and Ancillary Equipment System (System 160), and Shipping and Receiving Facility Transport System (System 180). Packaging System (System 120), including the RTG packaging is licensed (regulatory) hardware; it is certified by the U.S. Department of Energy to be in accordance with Title 10, {ital Code} {ital of} {ital Federal} {ital Regulations}, Part 71 (10 CFR 71). System 140, System 160, and System 180 are nonlicensed (nonregulatory) hardware. {copyright} {ital 1995} {ital American} {ital Institute} {ital of} {ital Physics}

  13. Wind-US Results for the AIAA 2nd Propulsion Aerodynamics Workshop

    NASA Technical Reports Server (NTRS)

    Dippold, Vance III; Foster, Lancert; Mankbadi, Mina

    2014-01-01

    This presentation contains Wind-US results presented at the 2nd Propulsion Aerodynamics Workshop. The workshop was organized by the American Institute of Aeronautics and Astronautics, Air Breathing Propulsion Systems Integration Technical Committee with the purpose of assessing the accuracy of computational fluid dynamics for air breathing propulsion applications. Attendees included representatives from government, industry, academia, and commercial software companies. Participants were encouraged to explore and discuss all aspects of the simulation process including the effects of mesh type and refinement, solver numerical schemes, and turbulence modeling. The first set of challenge cases involved computing the thrust and discharge coefficients for a 25deg conical nozzle for a range of nozzle pressure ratios between 1.4 and 7.0. Participants were also asked to simulate two cases in which the 25deg conical nozzle was bifurcated by a solid plate, resulting in vortex shedding (NPR=1.6) and shifted plume shock (NPR=4.0). A second set of nozzle cases involved computing the discharge and thrust coefficients for a convergent dual stream nozzle for a range of subsonic nozzle pressure ratios. The workshop committee also compared the plume mixing of these cases across various codes and models. The final test case was a serpentine inlet diffuser with an outlet to inlet area ratio of 1.52 and an offset of 1.34 times the inlet diameter. Boundary layer profiles, wall static pressure, and total pressure at downstream rake locations were examined.

  14. Transient 2(nd) Degree Av Block Mobitz Type II: A Rare Finding in Dengue Haemorrhagic Fever.

    PubMed

    Nigam, Ashwini Kumar; Singh, Omkar; Agarwal, Ayush; Singh, Amit K; Yadav, Subhash

    2015-05-01

    Dengue has been a major problem as endemic occurs almost every year and causes a state of panic due to lack of proper diagnostic methods and facilities for proper management. Patients presenting with classical symptoms are easy to diagnose, however as a large number of cases occur every year, a number of cases diagnosed with dengue fever on occasion presents with atypical manifestations, which cause extensive evaluation of the patients, unnecessary referral to higher centre irrespective of the severity and therefore a rough idea of these manifestations must be present in the backdrop in order to prevent these problems. Involvement of cardiovascular system in dengue has been reported in previous studies, and they are usually benign and self-limited. The importance of study of conduction abnormalities is important as sometimes conduction blocks are the first sign of acute myocarditis in patients of Dengue Hemorrhagic Fever in shock. We present here a case of 2(nd) Degree Mobitz Type II atrioventricular AV block in a case of Dengue Hemorrhagic fever reverting to the normal rhythm in recovery phase and no signs thereafter on follow up. PMID:26155512

  15. Solar energy thermally powered electrical generating system

    NASA Technical Reports Server (NTRS)

    Owens, William R. (Inventor)

    1989-01-01

    A thermally powered electrical generating system for use in a space vehicle is disclosed. The rate of storage in a thermal energy storage medium is controlled by varying the rate of generation and dissipation of electrical energy in a thermally powered electrical generating system which is powered from heat stored in the thermal energy storage medium without exceeding a maximum quantity of heat. A control system (10) varies the rate at which electrical energy is generated by the electrical generating system and the rate at which electrical energy is consumed by a variable parasitic electrical load to cause storage of an amount of thermal energy in the thermal energy storage system at the end of a period of insolation which is sufficient to satisfy the scheduled demand for electrical power to be generated during the next period of eclipse. The control system is based upon Kalman filter theory.

  16. Physics design of the DARHT 2nd axis accelerator cell

    SciTech Connect

    Chen, Y J; Houck, T L; Reginato, L J; Shang, C C; Yu, S S

    1999-08-19

    The next generation of radiographic machines based on induction accelerators require very high brightness electron beams to realize the desired x-ray spot size and intensity. This high brightness must be maintained throughout the beam transport, from source to x-ray converter target. The accelerator for the second-axis of the Dual Axis Radiographic Hydrodynamic Test (DARHT) facility is being designed to accelerate a 4-kA, 2-{micro}s pulse of electrons to 20 MeV. After acceleration, the 2-{micro}s pulse will be chopped into a train of four 50-ns pulses with variable temporal spacing by rapidly deflecting the beam between a beam stop and the final transport section. The short beam pulses will be focused onto an x-ray converter target generating four radiographic pulses within the 2-{micro}s window. Beam instability due to interaction with the accelerator cells can very adversely effect the beam brightness and radiographic pulse quality. This paper describes the various issues considered in the design of the accelerator cell with emphasis on transverse impedance and minimizing beam instabilities.

  17. Terminological systems: bridging the generation gap.

    PubMed Central

    Rogers, J. E.; Rector, A. L.

    1997-01-01

    A rigorous formal description of the intended behaviour of a compositional terminology, a 'third generation' system, enables powerful semantic processing techniques to assist in the building of a large terminology. Use of an intermediate representation derived from such a formalism, but simplified to resemble a 'second generation' system, enables authors to work in an simpler and more familiar environment, avoiding many of the technical complications of the 'third generation' system. PMID:9357698

  18. Four-dimensional investigation of the 2nd order volume autocorrelation technique

    NASA Astrophysics Data System (ADS)

    Faucher, O.; Tzallas, P.; Benis, E. P.; Kruse, J.; Peralta Conde, A.; Kalpouzos, C.; Charalambidis, D.

    2009-10-01

    The 2nd order volume autocorrelation technique, widely utilized in directly measuring ultra-short light pulses durations, is examined in detail via model calculations that include three-dimensional integration over a large ionization volume, temporal delay and spatial displacement of the two beams of the autocorrelator at the focus. The effects of the inherent displacement to the 2nd order autocorrelation technique are demonstrated for short and long pulses, elucidating the appropriate implementation of the technique in tight focusing conditions. Based on the above investigations, a high accuracy 2nd order volume autocorrelation measurement of the duration of the 5th harmonic of a 50 fs long laser pulse, including the measurement of the carrier wavelength oscillation, is presented.

  19. Lymphatic imaging: Lymphography, computed tomography and scintigraphy, 2nd ed

    SciTech Connect

    Close, M.E.; Wallace, S.

    1985-01-01

    The latest addition to the Golden's Diagnostic Radiology series deals not only with imaging of the lymphatic system but also with lymphatic anatomy, its pathophysiology, and treatment of disorders. The first two chapters deal with the history of the discovery of the lymphatic system and its normal anatomy. The section on technique contains practical information and discussion of lymphatic physiology and the pathology of lymphomas. Half of the book's 16 chapters are devoted to problems encountered in clinical imaging. The approach is both by anatomy (thorax, neck, abdomen) and pathology (benign disease, lymphoma, solid tumors).

  20. Easy Steps to STAIRS. 2nd Revised Edition.

    ERIC Educational Resources Information Center

    National Library of Australia, Canberra.

    This manual for computer searchers describes the software package--IBM's STAIRS (Storage And Information Retrieval System)--used for searching databases in AUSINET (AUStralian Information NETwork). Whereas the first edition explained STAIRS in the context of the National Library's Online ERIC Project and the ERIC data base, this second edition…

  1. Proceedings of the 2nd NASA Ada User's Symposium

    NASA Technical Reports Server (NTRS)

    1989-01-01

    Several presentations, mostly in viewgraph form, on various topics relating to Ada applications are given. Topics covered include the use of Ada in NASA, Ada and the Space Station, the software support environment, Ada in the Software Engineering Laboratory, Ada at the Jet Propulsion Laboratory, the Flight Telerobotic Servicer, and lessons learned in prototyping the Space Station Remote Manipulator System control.

  2. Owl: Next Generation System Monitoring

    SciTech Connect

    Schulz, M; White, B S; McKee, S A; Lee, H S; Jeitner, J

    2005-02-16

    As microarchitectural and system complexity grows, comprehending system behavior becomes increasingly difficult, and often requires obtaining and sifting through voluminous event traces or coordinating results from multiple, non-localized sources. Owl is a proposed framework that overcomes limitations faced by traditional performance counters and monitoring facilities in dealing with such complexity by pervasively deploying programmable monitoring elements throughout a system. The design exploits reconfigurable or programmable logic to realize hardware monitors located at event sources, such as memory buses. These monitors run and writeback results autonomously with respect to the CPU, mitigating the system impact of interrupt-driven monitoring or the need to communicate irrelevant events to higher levels of the system. The monitors are designed to snoop any kind of system transaction, e.g., within the core, on a bus, across the wire, or within I/O devices.

  3. Proceedings of the 2nd Experimental Chaos Conference

    NASA Astrophysics Data System (ADS)

    Ditto, William; Pecora, Lou; Shlesinger, Michael; Spano, Mark; Vohra, Sandeep

    1995-02-01

    The Table of Contents for the full book PDF is as follows: * Introduction * Spatiotemporal Phenomena * Experimental Studies of Chaotic Mixing * Using Random Maps in the Analysis of Experimental Fluid Flows * Transition to Spatiotemporal Chaos in a Reaction-Diffusion System * Ion-Dynamical Chaos in Plasmas * Optics * Chaos in a Synchronously Driven Optical Resonator * Chaos, Patterns and Defects in Stimulated Scattering Phenomena * Test of the Normal Form for a Subcritical Bifurcation * Observation of Bifurcations and Chaos in a Driven Fiber Optic Coil * Applications -- Communications * Robustness and Signal Recovery in a Synchronized Chaotic System * Synchronizing Nonautonomous Chaotic Circuits * Synchronization of Pulse-Coupled Chaotic Oscillators * Ocean Transmission Effects on Chaotic Signals * Controlling Symbolic Dynamics for Communication * Applications -- Control * Analysis of Nonlinear Actuators Using Chaotic Waveforms * Controlling Chaos in a Quasiperiodic Electronic System * Control of Chaos in a CO2 Laser * General Research * Video-Based Analysis of Bifurcation Phenomena in Radio-Frequency-Excited Inert Gas Plasmas * Transition from Soliton to Chaotic Motion During the Impact of a Nonlinear Structure * Sonoluminescence in a Single Bubble: Periodic, Quasiperiodic and Chaotic Light Source * Quantum Chaos Experiments Using Microwave Cavities * Experiments on Quantum Chaos With and Without Time Reversibility * When Small Noise Imposed on Deterministic Dynamics Becomes Important * Biology * Chaos Control for Cardiac Arrhythmias * Irregularities in Spike Trains of Cat Retinal Ganglion Cells * Broad-Band Synchronization in Monkey Neocortex * Applicability of Correlation Dimension Calculations to Blood Pressure Signal in Rats * Tests for Deterministic Chaos in Noisy Time Series * The Crayfish Mechanoreceptor Cell: A Biological Example of Stochastic Resonance * Chemistry * Chaos During Heterogeneous Chemical Reactions * Stabilizing and Tracking Unstable Periodic

  4. Regional Observations of North Korea Explosions: 1st and 2nd Tests

    NASA Astrophysics Data System (ADS)

    Chi, Heon Cheol; Shin, Jin Soo; Lee, Hee-Il; Park, Jung Ho; Sheen, Dong-Hoon; Kim, Geunyoung; Kim, Tea Sung; Che, Il-Young; Lim, In-Seub

    2010-05-01

    Through data exchanging with China, Russia and Japan, KIGAM could monitor North Korea explosion tests in near real time with azimuthally full coverage from the test site. Except for the East Sea (Japan Sea) side, the seismic stations are distributed uniformly along the boundaries of North Korea and adjacent countries. The error ellipses of epicentral determination of test site for 1st and 2nd tests showed almost identical pattern if they were separately calculated with the same configuration of stations. But the combined use of the 1st and the 2nd test data showed that the 2nd test site was moved approximately 2 Km westward from 1st site. The Pn/Lg spectral ratio clearly discriminate these events from two nearby natural earthquakes above 4 Hz. Full moment tensor inversion also indicate the 2nd test had a very large isotropic component. But mb-Ms discrimination, which has been considered one of the most reliable discriminants for separating explosions and earthquakes, did not show apparently the known pattern of explosion for both tests. Body wave magnitude, mb(Pn) of the 2nd test, which was evaluated as 4.5 by KIGAM, varies with directional location of stations widely from 4.1 to 5.2. The magnitude obtained from Lg, mb(Lg), showed narrow variation between 4.3 to 4.7 with the average of 4.5. In the case of both 1st and 2nd tests, both mb(Pn) and mb(Lg) showed equivalently large variation with directional station location. These variations are mainly due to lateral variation of crustal structures surrounding the test site. Remarkably mb(Lg) showed very linear relationship with mb(Pn). By considering attenuation characteristics according to the propagation path, the variations could be effectively reduced. The cut-off frequencies of P wave of both tests showed no or negligible difference even though the estimated yield of the 2nd test were much larger than that of the 1st one. The ratio of P-wave amplitudes of two tests showed from 2 to 3.1 times. Correspondingly the

  5. Monitoring North Korea Explosions: Status and Result of 1st and 2nd Tests (Invited)

    NASA Astrophysics Data System (ADS)

    Chi, H.; Lee, H.; Shin, J.; Park, J.; Sheen, D.; Kim, G.; Che, I.; Lim, I.; Kim, T.

    2009-12-01

    Through data exchanging with China, Russia and Japan, KIGAM could monitor North Korea explosion tests in near real time with azimuthal full coverage from the test site. Except for the East Sea (Japan Sea) side, the seismic stations are distributed uniformly along the boundaries of North Korea and adjacent countries, and only stations with the distance of 200 to 550 Km from the test site were considered. Irrespective of azimuthal directions of stations from the test site, the conventional discrimination, Pn/Lg spectral ratio clearly showed that both tests were explosion. But mb-Ms discrimination did not show apparently the known pattern of explosion for both tests. Body wave magnitude, mb(Pn) of 2nd test, which was evaluated as 4.5 by KIGAM, varies with directional location of stations widely from 4.1 to 5.2. The magnitude obtained from Lg, mb(Lg), showed narrow variation between 4.3 to 4.7 with the average of 4.5. In the case of 1st test, both mb(Pn) and mb(Lg) showed equivalently large variation with directional station location. The error ellipses of epicentral determination of test site for 1st and 2nd tests showed almost identical pattern if they were separately calculated with the same configuration of stations. But the combined use of 1st and 2nd test data showed that 2nd test site was moved approximately 2 Km westward from 1st site. The cut-off frequencies of P wave of 1st and 2nd tests showed no or negligible difference even though the estimated yield of 2nd test were much larger than that of 1st one. The ratio of 1st and 2nd P-wave amplitudes showed from 2 to 3.1 times. Correspondingly the estimated energy or yield were ranged from 4 to roughly 10 times. KIGAM evaluated the yield of 2nd test were 8 times in the average larger than that of 1st one.

  6. 2nd ISS Treadmill Development "T2 Project"

    NASA Technical Reports Server (NTRS)

    MacNeill, Kevin; Wiederhoeft, Curt

    2007-01-01

    An overview of the development of a treadmill for the International Space Station is presented. Topics discussed include: flight certification of a Commercial Off the Shelf (COTS) Woodway Path treadmill; development and certificaiton of a crew interface to optimize use of the COTS design and/or existing NASA design (such as the ARED Pacebook); development and certification of a power supply to provide power from the ISS Vehicle to the treadmill system (crew interfaces, motor, controller and subject loading devices).

  7. DOE performance indicators for 2nd quarter CY 1993

    SciTech Connect

    Not Available

    1993-11-01

    The Department of Energy (DOE) has established a Department-wide Performance Indicator (PI) Program for trending and analysis of operational data as directed by DOE Order 5480.26. The PI Program was established to provide a means for monitoring the environment, safety, and health (ES&H) performance of the DOE at the Secretary and other management levels. This is the tenth in a series of quarterly reports generated for the Department of Energy Idaho Operations Office (DOE-ID) by EG&G Idaho, Inc. to meet the requirements of the PI Program as directed by the DOE Standard (DOE-STD-1048-92). The information in this tenth quarterly report, while contributing to a historical database for supporting future trending analysis, does not at this time provide a sound basis for developing trend-related conclusions. In the future, it is expected that trending and analysis of operational data will enhance the safety culture in both DOE and contractor organizations by providing an early warning of deteriorating environment, safety, and health conditions. DOE-STD-1048-92 identifies four general areas of PIs. They are: Personnel Safety, Operational Incidents, Environment, and Management. These four areas have been subdivided into 26 performance indicators. Approximately 115 performance indicator control and distribution charts comprise the body of this report. A brief summary of PIs contained in each of these general areas is provided. The four EG&G facilities whose performance is charted herein are as follows: (1) The Advanced Test Reactor (ATR), (2) The Radioactive Waste Management Complex (RWMC), (3) The Waste Experimental Reduction Facility (WERF), and (4) The Test Reactor Area (TRA) Hot Cells.

  8. Discrete mathematics for computer scientists and mathematicians: 2nd ed

    SciTech Connect

    Mott, J.L.; Kandel, A.; Baker, T.P.

    1986-01-01

    This book considers such algorithms as the least mean-square (LMS) algorithm, different versions of the Kalman algorithm, the recursive least squares (RLS) algorithm, the fast transversal filters (FTF) algorithm, the exact least squares lattice (LSL) algorithm, and the recursive-QR decomposition-LS algorithm; offers thorough discussion of the Wiener and Kalman filter theories and considers the structures of transversal filter, lattice predictor, and systolic array; and explores such applications as adaptive prediction, adaptive equalization, system identification, analysis of superimposed sinusoids in noise, adaptive detection, and adaptive beam forming.

  9. Primary Standards Laboratory report, 2nd half 1993

    SciTech Connect

    Not Available

    1994-05-01

    The Primary Standards Laboratory (PSL) operates a system-wide primary standards and calibration program for the US Department of Energy, Albuquerque Field Office (DOE/AL). The PSL mission is as follows: to develop and maintain primary standards; to calibrate electrical, physical, and radiation reference standards for customer laboratories (DOE/AL nuclear weapon contractors); to conduct the technical surveys and measurement audits of these laboratories; and to recommend and implement system-wide improvements. This report summarizes activities of the PSL for the second half of 1993 and provides information pertinent to the operation of the DOE/AL Standards and Calibration Program. Specific areas covered include development projects, improvement projects, calibration and special measurements, surveys and audits, customer service, and significant events. Appendixes include certifications and reports;; a discussion about commercial calibration laboratories; PSL memoranda (PSLM); test numbers from the National Institute of Standards and Technology (NIST), formerly the National Bureau of Standards (NBS); and DOE/PSL memoranda on the Standards and Calibration Program with emphasis on traceability of PSL calibrations.

  10. Second generation laser manufacturing systems

    NASA Astrophysics Data System (ADS)

    La Rocca, Aldo V.

    1996-03-01

    Laser processing can show its full capacity in laser multiprocessing systems applications in which the laser is not hindered by the constraints imposed when the laser is inserted in conventional systems without reassessing the overall system design. In these cases the laser process performance up to now was kept at very low levels because conventional systems would not need or accept higher ones. Instead now said performance must be brought to the upper limits inasmuch as the lasers will be the pacesetter for the performance of the new systems freed from all the old design bondage. Hence the importance to get the maximum performance from each process singly and from their combinations. Better understanding and control of the fluidynamic effects becomes mandatory because of their paramount role on process energy efficiency and thus process productivity and more important yet quality, repeatability and transferability. At present one of the dedicated laser multiprocessing systems of greatest interest is the laser cut-weld of which several have made appearance on the market. Next to come are the 'augmented' laser multiprocessing obtained by combining the laser with conventional processes in a manner which takes advantages of unexpected synergies permitted by the laser. In this manner, the system is allowed to outperform, in all aspects from productivity to quality, the already much higher performance of dedicated all laser multi- processing system. One of the most important 'augmented' laser multiprocessing is the cut- bend-weld. It should be clear that these flexible multiprocessing machines tend to grow naturally in multistation cells and their aggregation in isles and complete manufacturing centers; i.e., the first viable realizations of computer integrated manufacturing.

  11. Efficacy and Safety of rAAV2-ND4 Treatment for Leber’s Hereditary Optic Neuropathy

    PubMed Central

    Wan, Xing; Pei, Han; Zhao, Min-jian; Yang, Shuo; Hu, Wei-kun; He, Heng; Ma, Si-qi; Zhang, Ge; Dong, Xiao-yan; Chen, Chen; Wang, Dao-wen; Li, Bin

    2016-01-01

    Leber’s hereditary optic neuropathy (LHON) is a mitochondrially inherited disease leading to blindness. A mitochondrial DNA point mutation at the 11778 nucleotide site of the NADH dehydrogenase subunit 4 (ND4) gene is the most common cause. The aim of this study was to evaluate the efficacy and safety of a recombinant adeno-associated virus 2 (AAV2) carrying ND4 (rAAV2-ND4) in LHON patients carrying the G11778A mutation. Nine patients were administered rAAV2-ND4 by intravitreal injection to one eye and then followed for 9 months. Ophthalmologic examinations of visual acuity, visual field, and optical coherence tomography were performed. Physical examinations included routine blood and urine. The visual acuity of the injected eyes of six patients improved by at least 0.3 log MAR after 9 months of follow-up. In these six patients, the visual field was enlarged but the retinal nerve fibre layer remained relatively stable. No other outcome measure was significantly changed. None of the nine patients had local or systemic adverse events related to the vector during the 9-month follow-up period. These findings support the feasible use of gene therapy for LHON. PMID:26892229

  12. Systems Prototyping with Fourth Generation Tools.

    ERIC Educational Resources Information Center

    Sholtys, Phyllis

    1983-01-01

    The development of information systems using an engineering approach that uses both traditional programing techniques and fourth generation software tools is described. Fourth generation applications tools are used to quickly develop a prototype system that is revised as the user clarifies requirements. (MLW)

  13. The adaptive control system of acetylene generator

    NASA Astrophysics Data System (ADS)

    Kovaliuk, D. O.; Kovaliuk, Oleg; Burlibay, Aron; Gromaszek, Konrad

    2015-12-01

    The method of acetylene production in acetylene generator was analyzed. It was found that impossible to provide the desired process characteristics by the PID-controller. The adaptive control system of acetylene generator was developed. The proposed system combines the classic controller and fuzzy subsystem for controller parameters tuning.

  14. Solid State Energy Conversion Alliance 2nd Annual Workshop Proceedings

    SciTech Connect

    National Energy Technology Laboratory

    2001-03-30

    The National Energy Technology Laboratory (NETL) and the Pacific Northwest National Laboratory (PNNL) are pleased to provide the proceedings of the second annual Solid State Energy Conversion Alliance (SECA) Workshop held on March 29-30, 2001 in Arlington. The package includes the presentations made during the workshop, a list of participants, and the results of the breakout sessions. Those sessions covered stack materials and processes, power electronics, balance of plant and thermal integration, fuel processing technologies, and stack and system performance modeling. The breakout sessions have been reported as accurately as possible; however, due to the recording and transcription process errors may have occurred. If you note any significant omissions or wish to provide additional information, we welcome your comments and hope that all stakeholder groups will use the enclosed information in their planning endeavors.

  15. The planet Jupiter: The observer's handbook /2nd revised edition/

    NASA Astrophysics Data System (ADS)

    Peek, B. M.; Moore, P.

    The book presents an account of observations of the planet Jupiter, complete to the year 1947 and including additional material to 1957, as well as the data revealed by these observations, revised in light of the Voyager results. Following remarks on the aims, methods and limitations of visual observations of the Jovian surface, attention is given to color and position observations, and observations of the individual polar regions, belts and zones, the Great Red Spot and South Tropical Disturbance, oscillating spots, and to the limitations, methods and achievements of photographic observations. A brief survey is presented of the satellite system and the mutual occultations and eclipses within it. Computational methods are also noted as regards the reduction of latitude measurements, times of apparent central meridian passage of a satellite shadow, and central meridian movements.

  16. Firewall systems: the next generation

    NASA Astrophysics Data System (ADS)

    McGhie, Lynda L.

    1996-01-01

    To be competitive in today's globally connected marketplace, a company must ensure that their internal network security methodologies and supporting policies are current and reflect an overall understanding of today's technology and its resultant threats. Further, an integrated approach to information security should ensure that new ways of sharing information and doing business are accommodated; such as electronic commerce, high speed public broadband network services, and the federally sponsored National Information Infrastructure. There are many challenges, and success is determined by the establishment of a solid and firm baseline security architecture that accommodate today's external connectivity requirements, provides transitional solutions that integrate with evolving and dynamic technologies, and ultimately acknowledges both the strategic and tactical goals of an evolving network security architecture and firewall system. This paper explores the evolution of external network connectivity requirements, the associated challenges and the subsequent development and evolution of firewall security systems. It makes the assumption that a firewall is a set of integrated and interoperable components, coming together to form a `SYSTEM' and must be designed, implement and managed as such. A progressive firewall model will be utilized to illustrates the evolution of firewall systems from earlier models utilizing separate physical networks, to today's multi-component firewall systems enabling secure heterogeneous and multi-protocol interfaces.

  17. BOOK REVIEW: Mind, Matter and Quantum Mechanics (2nd edition)

    NASA Astrophysics Data System (ADS)

    Mahler, G.

    2004-07-01

    Quantum mechanics is usually defined in terms of some loosely connected axioms and rules. Such a foundation is far from the beauty of, e.g., the `principles' underlying classical mechanics. Motivated, in addition, by notorious interpretation problems, there have been numerous attempts to modify or `complete' quantum mechanics. A first attempt was based on so-called hidden variables; its proponents essentially tried to expel the non-classical nature of quantum mechanics. More recent proposals intend to complete quantum mechanics not within mechanics proper but on a `higher (synthetic) level'; by means of a combination with gravitation theory (R Penrose), with quantum information theory (C M Caves, C A Fuchs) or with psychology and brain science (H P Stapp). I think it is fair to say that in each case the combination is with a subject that, per se, suffers from a very limited understanding that is even more severe than that of quantum mechanics. This was acceptable, though, if it could convincingly be argued that scientific progress desperately needs to join forces. Quantum mechanics of a closed system was a beautiful and well understood theory with its respective state being presented as a point on a deterministic trajectory in Liouville space---not unlike the motion of a classical N-particle system in its 6N-dimensional phase-space. Unfortunately, we need an inside and an outside view, we need an external reference frame, we need an observer. This unavoidable partition is the origin of most of the troubles we have with quantum mechanics. A pragmatic solution is introduced in the form of so-called measurement postulates: one of the various incompatible properties of the system under consideration is supposed to be realized (i.e. to become a fact, to be defined without fundamental dispersion) based on `instantaneous' projections within some externally selected measurement basis. As a result, the theory becomes essentially statistical rather than deterministic

  18. An Introduction to Thermodynamics and Statistical Mechanics - 2nd Edition

    NASA Astrophysics Data System (ADS)

    Stowe, Keith

    2003-03-01

    This introductory textbook for standard undergraduate courses in thermodynamics has been completely rewritten. Starting with an overview of important quantum behaviours, the book teaches students how to calculate probabilities, in order to provide a firm foundation for later chapters. It introduces the ideas of classical thermodynamics and explores them both in general and as they are applied to specific processes and interactions. The remainder of the book deals with statistical mechanics - the study of small systems interacting with huge reservoirs. The changes to this second edition have been made after more than 10 years classroom testing and student feedback. Each topic ends with a boxed summary of ideas and results, and every chapter contains numerous homework problems, covering a broad range of difficulties. Answers are given to odd numbered problems, and solutions to even problems are available to instructors at www.cambridge.org/9780521865579. The entire book has been re-written and now covers more topics It has a greater number of homework problems which range in difficulty from warm-ups to challenges It is concise and has an easy reading style

  19. Generation-IV Nuclear Energy Systems

    NASA Astrophysics Data System (ADS)

    McFarlane, Harold

    2008-05-01

    Nuclear power technology has evolved through roughly three generations of system designs: a first generation of prototypes and first-of-a-kind units implemented during the period 1950 to 1970; a second generation of industrial power plants built from 1970 to the turn of the century, most of which are still in operation today; and a third generation of evolutionary advanced reactors which began being built by the turn of the 20^th century, usually called Generation III or III+, which incorporate technical lessons learned through more than 12,000 reactor-years of operation. The Generation IV International Forum (GIF) is a cooperative international endeavor to develop advanced nuclear energy systems in response to the social, environmental and economic requirements of the 21^st century. Six Generation IV systems under development by GIF promise to enhance the future contribution and benefits of nuclear energy. All Generation IV systems aim at performance improvement, new applications of nuclear energy, and/or more sustainable approaches to the management of nuclear materials. High-temperature systems offer the possibility of efficient process heat applications and eventually hydrogen production. Enhanced sustainability is achieved primarily through adoption of a closed fuel cycle with reprocessing and recycling of plutonium, uranium and minor actinides using fast reactors. This approach provides significant reduction in waste generation and uranium resource requirements.

  20. Proceedings of the 2nd symposium on valves for coal conversion and utilization

    SciTech Connect

    Maxfield, D.A.

    1981-01-01

    The 2nd symposium on valves for coal conversion and utilization was held October 15 to 17, 1980. It was sponsored by the US Department of Energy, Morgantown Energy Technology Center, in cooperation with the Valve Manufacturers Association. Seventeen papers have been entered individually into EDB and ERA. (LTN)

  1. Methods for the Determination of Chemical Substances in Marine and Estuarine Environmental Matrices - 2nd Edition

    EPA Science Inventory

    This NERL-Cincinnati publication, “Methods for the Determination of Chemical Substances in Marine and Estuarine Environmental Matrices - 2nd Edition” was prepared as the continuation of an initiative to gather together under a single cover a compendium of standardized laborato...

  2. 2nd International Forum for Surveillance and Control of Mosquitoes and Mosquito-borne Diseases

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The Entomological Society of China (ESC) and Beijing Institute of Microbiology and Epidemiology (BIME) hosted the 2nd International Forum for Surveillance and Control of Mosquitoes and Mosquito-borne Diseases in Beijing, China, May 23-27, 2011. The theme of the Forum was “Impact of global climate ch...

  3. Technical Adequacy of the Disruptive Behavior Rating Scale-2nd Edition--Self-Report

    ERIC Educational Resources Information Center

    Erford, Bradley T.; Miller, Emily M.; Isbister, Katherine

    2015-01-01

    This study provides preliminary analysis of the Disruptive Behavior Rating Scale-2nd Edition--Self-Report, which was designed to screen individuals aged 10 years and older for anxiety and behavior symptoms. Score reliability and internal and external facets of validity were good for a screening-level test.

  4. Stem cells and cancer immunotherapy: Arrowhead’s 2nd annual cancer immunotherapy conference

    PubMed Central

    2014-01-01

    Investigators from academia and industry gathered on April 4 and 5, 2013, in Washington DC at the Arrowhead’s 2nd Annual Cancer Immunotherapy Conference. Two complementary concepts were discussed: cancer “stem cells” as targets and therapeutic platforms based on stem cells.

  5. The Effect of Using Computer Edutainment on Developing 2nd Primary Graders' Writing Skills

    ERIC Educational Resources Information Center

    Mohammed Abdel Raheem, Azza Ashraf

    2011-01-01

    The present study attempted to examine the effect of using computer edutainment on developing 2nd graders' writing skills. The study comprised thirty-second year primary stage enrolled in Bani Hamad primary governmental school, Minia governorate. The study adopted the quasi-experimental design. Thirty participants were randomly assigned to one…

  6. 70. VIEW OF LIFEGUARD TOWER ON SOUTHEAST SIDE OF 2ND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    70. VIEW OF LIFEGUARD TOWER ON SOUTHEAST SIDE OF 2ND TEE (LEFT) AND NORTHWEST SIDE OF TEE (RIGHT), WITH VIEW OF PILINGS, LOOKING SOUTH-SOUTHWEST - Huntington Beach Municipal Pier, Pacific Coast Highway at Main Street, Huntington Beach, Orange County, CA

  7. 71. VIEW OF NORTHWEST SIDE OF 2ND TEE (LEFT), SHOWING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    71. VIEW OF NORTHWEST SIDE OF 2ND TEE (LEFT), SHOWING VIEW OF PILINGS, LIFEGURD TOWER ON SOUTHEAST SIDE OF TEE (RIGHT), LOOKING EAST-NORTHEAST - Huntington Beach Municipal Pier, Pacific Coast Highway at Main Street, Huntington Beach, Orange County, CA

  8. Fuel cell using a hydrogen generation system

    DOEpatents

    Dentinger, Paul M.; Crowell, Jeffrey A. W.

    2010-10-19

    A system is described for storing and generating hydrogen and, in particular, a system for storing and generating hydrogen for use in an H.sub.2/O.sub.2 fuel cell. The hydrogen storage system uses beta particles from a beta particle emitting material to degrade an organic polymer material to release substantially pure hydrogen. In a preferred embodiment of the invention, beta particles from .sup.63Ni are used to release hydrogen from linear polyethylene.

  9. Brachytherapy next generation: robotic systems.

    PubMed

    Popescu, Tiberiu; Kacsó, Alex Cristian; Pisla, Doina; Kacsó, Gabriel

    2015-12-01

    In a field dominated by external beam radiation therapy (EBRT), both the therapeutic and technical possibilities of brachytherapy (BT) are underrated, shadowed by protons and intensity modulated radiotherapy. Decreasing expertise and indications, as well as increasing lack of specific BT training for radiation therapy (RT) residents led to the real need of shortening its learning curve and making it more popular. Developing robotic BT devices can be a way to mitigate the above issues. There are many teams working at custom-made robotic BT platforms to perfect and overcome the limitations of the existing systems. This paper provides a picture of the current state-of-the-art in robotic assisted BT, as it also conveys the author's solution to the problem, a parallel robot that uses CT-guidance. PMID:26816510

  10. Brachytherapy next generation: robotic systems

    PubMed Central

    Popescu, Tiberiu; Kacsó, Alex Cristian; Pisla, Doina

    2015-01-01

    In a field dominated by external beam radiation therapy (EBRT), both the therapeutic and technical possibilities of brachytherapy (BT) are underrated, shadowed by protons and intensity modulated radiotherapy. Decreasing expertise and indications, as well as increasing lack of specific BT training for radiation therapy (RT) residents led to the real need of shortening its learning curve and making it more popular. Developing robotic BT devices can be a way to mitigate the above issues. There are many teams working at custom-made robotic BT platforms to perfect and overcome the limitations of the existing systems. This paper provides a picture of the current state-of-the-art in robotic assisted BT, as it also conveys the author's solution to the problem, a parallel robot that uses CT-guidance. PMID:26816510

  11. POWER GENERATING NEUTRONIC REACTOR SYSTEM

    DOEpatents

    Vernon, H.C.

    1958-03-01

    This patent relates to reactor systems of the type wherein the cooiing medium is a liquid which is converted by the heat of the reaction to steam which is conveyed directly to a pnime mover such as a steam turbine driving a generatore after which it is condensed and returred to the coolant circuit. In this design, the reactor core is disposed within a tank for containing either a slurry type fuel or an aggregation of solid fuel elements such as elongated rods submerged in a liquid moderator such as heavy water. The top of the tank is provided with a nozzle which extends into an expansion chamber connected with the upper end of the tank, the coolant being maintained in the expansion chamber at a level above the nozzle and the steam being formed in the expansion chamber.

  12. Mechanosensitivity of the 2nd Kind: TGF-β Mechanism of Cell Sensing the Substrate Stiffness

    PubMed Central

    Cockerill, Max; Rigozzi, Michelle K.; Terentjev, Eugene M.

    2015-01-01

    Cells can sense forces applied to them, but also the stiffness of their environment. These are two different phenomena, and here we investigate the mechanosensitivity of the 2nd kind: how the cell can measure an elastic modulus at a single point of adhesion—and how the cell can receive and interpret the chemical signal released from the sensor. Our model uses the example of large latent complex of TGF-β as a sensor. Stochastic theory gives the rate of breaking of latent complex, which initiates the signaling feedback loop after the active TGF-β release and leads to a change of cell phenotype driven by the α-smooth muscle actin. We investigate the dynamic and steady-state behaviors of the model, comparing them with experiments. In particular, we analyse the timescale of approach to the steady state, the stability of the non-linear dynamical system, and how the steady-state concentrations of the key markers vary depending on the elasticity of the substrate. We discover a crossover region for values of substrate elasticity closely corresponding to that of the fibroblast to myofibroblast transition. We suggest that the cell could actively vary the parameters of its dynamic feedback loop to ‘choose’ the position of the transition region and the range of substrate elasticity that it can detect. In this way, the theory offers the unifying mechanism for a variety of phenomena, such as the myofibroblast conversion in fibrosis of wounds and lungs and smooth muscle cell dysfunction in cardiac disease. PMID:26448620

  13. Entry System Design Considerations for Mars Landers

    NASA Technical Reports Server (NTRS)

    Lockwood, Mary Kae; Powell, Richard W.; Graves, Claude A.; Carman, Gilbert L.

    2001-01-01

    The objective for the next generation or Mars landers is to enable a safe landing at specific locations of scientific interest. The 1st generation entry, descent and landing systems, ex. Viking and Pathfinder, provided successful landing on Mars but by design were limited to large scale, 100s of km, landing sites with minimal local hazards. The 2 nd generation landers, or smart landers, will provide scientists with access to previously unachievable landing sites by providing precision landing to less than 10 km of a target landing site, with the ability to perform local hazard avoidance, and provide hazard tolerance. This 2nd generation EDL system can be utilized for a range of robotic missions with vehicles sized for science payloads from the small 25-70 kg, Viking, Pathfinder, Mars Polar Lander and Mars Exploration Rover-class, to the large robotic Mars Sample Return, 300 kg plus, science payloads. The 2nd generation system can also be extended to a 3nd generation EDL system with pinpoint landing, 10's of meters of landing accuracy, for more capable robotic or human missions. This paper will describe the design considerations for 2nd generation landers. These landers are currently being developed by a consortium of NASA centers, government agencies, industry and academic institutions. The extension of this system and additional considerations required for a 3nd generation human mission to Mars will be described.

  14. Control system for fluid heated steam generator

    DOEpatents

    Boland, James F.; Koenig, John F.

    1985-01-01

    A control system for controlling the location of the nucleate-boiling region in a fluid heated steam generator comprises means for measuring the temperature gradient (change in temperature per unit length) of the heating fluid along the steam generator; means for determining a control variable in accordance with a predetermined function of temperature gradients and for generating a control signal in response thereto; and means for adjusting the feedwater flow rate in accordance with the control signal.

  15. Control system for fluid heated steam generator

    DOEpatents

    Boland, J.F.; Koenig, J.F.

    1984-05-29

    A control system for controlling the location of the nucleate-boiling region in a fluid heated steam generator comprises means for measuring the temperature gradient (change in temperature per unit length) of the heating fluid along the steam generator; means for determining a control variable in accordance with a predetermined function of temperature gradients and for generating a control signal in response thereto; and means for adjusting the feedwater flow rate in accordance with the control signal.

  16. Aircraft Photovoltaic Power-Generating System.

    NASA Astrophysics Data System (ADS)

    Doellner, Oscar Leonard

    Photovoltaic cells, appropriately cooled and operating in the combustion-created high radiant-intensity environment of gas-turbine and jet engines, may replace the conventional (gearbox-driven) electrical power generators aboard jet aircraft. This study projects significant improvements not only in aircraft electrical power-generating-system performance, but also in overall aircraft performance. Jet -engine design modifications incorporating this concept not only save weight (and thus fuel), but are--in themselves --favorable to jet-engine performance. The dissertation concentrates on operational, constructional, structural, thermal, optical, radiometrical, thin-film, and solid-state theoretical aspects of the overall project. This new electrical power-generating system offers solid-state reliability with electrical power-output capability comparable to that of existing aircraft electromechanical power-generating systems (alternators and generators). In addition to improvements in aircraft performance, significant aircraft fuel- and weight-saving advantages are projected.

  17. BOOK REVIEW: Quantum Field Theory in a Nutshell (2nd edn) Quantum Field Theory in a Nutshell (2nd edn)

    NASA Astrophysics Data System (ADS)

    Peskin, Michael E.

    2011-04-01

    and topology, and applications to condensed matter systems including the Peierls instability and the quantum Hall fluid. It is a large amount of territory to cover in a single volume. Few derivations are more than one page long. Those that fit in that space are very smooth, but others are too abbreviated to be fully comprehensible. The prose that accompanies the derivations, though, is always enticing. Zee misses no opportunity to point out that an argument he gives opens the door to some deeper subject that he encourages the reader to explore. I do warn students that it is easy to learn from this book how to talk quantum field theory without understanding it. To avoid this pitfall, it is important (as Zee emphasizes) to fill in the steps of his arguments with hard calculation. One topic from which Zee does not restrain himself is the quantum theory of gravity. In the first hundred pages we find a `concise introduction to curved spacetime' that includes a very pretty derivation of the Christoffel symbol from the geodesic equation. Toward the end of the book, there is a set of chapters devoted to the quantization of the gravitational field. The structure of the graviton propagator is worked out carefully. The van Dam-Veltman discontinuity between massless and massive spin 2 exchange is explained clearly. But after this Zee runs out of steam in presenting fully worked arguments. Still, there is room for more prose on connections to the great mysteries of the subject: the ultraviolet behavior, the cosmological constant, and the unification of forces. A new chapter added to the second edition discusses `Is Einstein Gravity The Square Of Yang-Mills Theory?' and suggests an affirmative answer, based on brand-new developments in perturbative quantum field theory. Quantum field theory is a large subject that still has not reached its definitive form. As such, there is room for many textbooks of complementary character. Zee states frankly, `It is not the purpose of this book

  18. BOOK REVIEW: Quantum Field Theory in a Nutshell (2nd edn) Quantum Field Theory in a Nutshell (2nd edn)

    NASA Astrophysics Data System (ADS)

    Peskin, Michael E.

    2011-04-01

    and topology, and applications to condensed matter systems including the Peierls instability and the quantum Hall fluid. It is a large amount of territory to cover in a single volume. Few derivations are more than one page long. Those that fit in that space are very smooth, but others are too abbreviated to be fully comprehensible. The prose that accompanies the derivations, though, is always enticing. Zee misses no opportunity to point out that an argument he gives opens the door to some deeper subject that he encourages the reader to explore. I do warn students that it is easy to learn from this book how to talk quantum field theory without understanding it. To avoid this pitfall, it is important (as Zee emphasizes) to fill in the steps of his arguments with hard calculation. One topic from which Zee does not restrain himself is the quantum theory of gravity. In the first hundred pages we find a `concise introduction to curved spacetime' that includes a very pretty derivation of the Christoffel symbol from the geodesic equation. Toward the end of the book, there is a set of chapters devoted to the quantization of the gravitational field. The structure of the graviton propagator is worked out carefully. The van Dam-Veltman discontinuity between massless and massive spin 2 exchange is explained clearly. But after this Zee runs out of steam in presenting fully worked arguments. Still, there is room for more prose on connections to the great mysteries of the subject: the ultraviolet behavior, the cosmological constant, and the unification of forces. A new chapter added to the second edition discusses `Is Einstein Gravity The Square Of Yang-Mills Theory?' and suggests an affirmative answer, based on brand-new developments in perturbative quantum field theory. Quantum field theory is a large subject that still has not reached its definitive form. As such, there is room for many textbooks of complementary character. Zee states frankly, `It is not the purpose of this book

  19. Automated Concurrent Blackboard System Generation in C++

    NASA Technical Reports Server (NTRS)

    Kaplan, J. A.; McManus, J. W.; Bynum, W. L.

    1999-01-01

    In his 1992 Ph.D. thesis, "Design and Analysis Techniques for Concurrent Blackboard Systems", John McManus defined several performance metrics for concurrent blackboard systems and developed a suite of tools for creating and analyzing such systems. These tools allow a user to analyze a concurrent blackboard system design and predict the performance of the system before any code is written. The design can be modified until simulated performance is satisfactory. Then, the code generator can be invoked to generate automatically all of the code required for the concurrent blackboard system except for the code implementing the functionality of each knowledge source. We have completed the port of the source code generator and a simulator for a concurrent blackboard system. The source code generator generates the necessary C++ source code to implement the concurrent blackboard system using Parallel Virtual Machine (PVM) running on a heterogeneous network of UNIX(trademark) workstations. The concurrent blackboard simulator uses the blackboard specification file to predict the performance of the concurrent blackboard design. The only part of the source code for the concurrent blackboard system that the user must supply is the code implementing the functionality of the knowledge sources.

  20. Individual Differences In The School Performance of 2nd-Grade Children Born to Low-Income Adolescent Mothers

    ERIC Educational Resources Information Center

    Apiwattanalunggarn, Kunlakarn Lekskul; Luster, Tom

    2005-01-01

    The purpose of this study was to investigate factors that contribute to individual differences in the school performance of 2nd-grade children born to adolescent mothers. The sample of this study was 90 low-income adolescent mothers and their children. Data were collected from the adolescent mothers and their first-born children, now in 2nd grade,…

  1. Collisionless shock generation in counter-streaming plasmas produced by a high-power laser system

    NASA Astrophysics Data System (ADS)

    Sakawa, Youichi; Kuramitsu, Y.; Morita, T.; Aoki, H.; Tanji, H.; Shibata, S.; Ide, T.; Ozaki, N.; Kodama, R.; Shiroshita, A.; Shigemori, K.; Sano, T.; Norimatsu, T.; Kato, T.; Takabe, H.; Waugh, J.; Woolsey, N.; Loupias, B.; Gregory, C.; Koenig, M.

    2009-11-01

    Laboratory experiments to study collisionless shock generation in counter-streaming plasmas have been investigated using Gekko XII HIPER laser system (352 nm (3φ), 500 ps, ˜100 J / beam, one or four beams, < 10^15 W/cm^2) at ILE. Two types of double-plane targets, Jet and Ablation types were used. In the Jet (Ablation) type, 10 μm (60 μm) and 60 μm thick CH planes were placed with the separation of 4.5 mm; beams were irradiated on the 1st CH and a rear-side (an ablation) plasma is formed, and the plasma from the 2nd CH is created by radiation and/or plasmas from the1st CH. The plasmas and shocks were diagnosed transverse to the main laser propagation direction; shadowgraphy and modified Nomarski interferometry using a probe laser with ICCD and streak cameras, and SOP and GOI using a visible (450 nm) self-emission. Counter-streaming plasmas were produced, and shock waves were observed. The width of the transition region is much shorter than ion-ion mean-free-path. A particle-in-cell simulation has predicted generation of an electrostatic shock.

  2. Performance of 2nd Generation BaBar Resistive Plate Chambers

    SciTech Connect

    Anulli, F.; Baldini, R.; Calcaterra, A.; de Sangro, R.; Finocchiaro, G.; Patteri, P.; Piccolo, M.; Zallo, A.; Cheng, C.H.; Lange, D.J.; Wright, D.M.; Messner, R.; Wisniewski, William J.; Pappagallo, M.; Andreotti, M.; Bettoni, D.; Calabrese, R.; Cibinetto, G.; Luppi, E.; Negrini, M.; Capra, R.; /Genoa U. /INFN, Genoa /Naples U. /INFN, Naples /Perugia U. /INFN, Perugia /Pisa U. /INFN, Pisa /Rome U. /INFN, Rome /Oregon U. /UC, Riverside /Wisconsin U., Madison

    2005-07-12

    The BaBar detector has operated nearly 200 Resistive Plate Chambers (RPCs), constructed as part of an upgrade of the forward endcap muon detector, for the past two years. The RPCs experience widely different background and luminosity-driven singles rates (0.01-10 Hz/cm{sup 2}) depending on position within the endcap. Some regions have integrated over 0.3 C/cm{sup 2}. RPC efficiency measured with cosmic rays is high and stable. The average efficiency measured with beam is also high. However, a few of the highest rate RPCs have suffered efficiency losses of 5-15%. Although constructed with improved techniques and minimal use of linseed oil, many of the RPCs, which are operated in streamer mode, have shown increased dark currents and noise rates that are correlated with the direction of the gas flow and the integrated current. Studies of the above aging effects are presented and correlated with detector operating conditions.

  3. Utilisation of 2nd Generation Web Technologies in Master Level Vocational Teacher Training

    ERIC Educational Resources Information Center

    Tóth, Péter

    2009-01-01

    The Masters level Opportunities and Technological Innovation in Vocational Teacher Education project (project site: http://motivate.tmpk.bmf.hu/) aims to develop the use and management of virtual learning environments in the area of vocational teacher training, drawing on a well established international partnership of institutions providing both…

  4. Reed canary grass as a feedstock for 2nd generation bioethanol production.

    PubMed

    Kallioinen, Anne; Uusitalo, Jaana; Pahkala, Katri; Kontturi, Markku; Viikari, Liisa; Weymarn, Niklas von; Siika-Aho, Matti

    2012-11-01

    The enzymatic hydrolysis and fermentation of reed canary grass, harvested in the spring or autumn, and barley straw were studied. Steam pretreated materials were efficiently hydrolysed by commercial enzymes with a dosage of 10-20FPU/g d.m. Reed canary grass harvested in the spring was hydrolysed more efficiently than the autumn-harvested reed canary grass. Additional β-glucosidase improved the release of glucose and xylose during the hydrolysis reaction. The hydrolysis rate and level of reed canary grass with a commercial Trichoderma reesei cellulase could be improved by supplementation of purified enzymes. The addition of CBH II improved the hydrolysis level by 10% in 48hours' hydrolysis. Efficient mixing was shown to be important for hydrolysis already at 10% dry matter consistency. The highest ethanol concentration (20g/l) and yield (82%) was obtained with reed canary grass at 10% d.m. consistency. PMID:22939601

  5. 2nd-Order CESE Results For C1.4: Vortex Transport by Uniform Flow

    NASA Technical Reports Server (NTRS)

    Friedlander, David J.

    2015-01-01

    The Conservation Element and Solution Element (CESE) method was used as implemented in the NASA research code ez4d. The CESE method is a time accurate formulation with flux-conservation in both space and time. The method treats the discretized derivatives of space and time identically and while the 2nd-order accurate version was used, high-order versions exist, the 2nd-order accurate version was used. In regards to the ez4d code, it is an unstructured Navier-Stokes solver coded in C++ with serial and parallel versions available. As part of its architecture, ez4d has the capability to utilize multi-thread and Messaging Passage Interface (MPI) for parallel runs.

  6. Control system for bearingless motor-generator

    NASA Technical Reports Server (NTRS)

    Kascak, Peter E. (Inventor); Jansen, Ralph H. (Inventor); Dever, Timothy P. (Inventor)

    2010-01-01

    A control system for an electromagnetic rotary drive for bearingless motor-generators comprises a winding configuration comprising a plurality of individual pole pairs through which phase current flows, each phase current producing both a lateral force and a torque. A motor-generator comprises a stator, a rotor supported for movement relative to the stator, and a control system. The motor-generator comprises a winding configuration supported by the stator. The winding configuration comprises at least three pole pairs through which phase current flows resulting in three three-phase systems. Each phase system has a first rotor reference frame axis current that produces a levitating force with no average torque and a second rotor reference frame axis current that produces torque.

  7. Control System for Bearingless Motor-generator

    NASA Technical Reports Server (NTRS)

    Kascak, Peter E. (Inventor); Jansen, Ralph H. (Inventor); Dever, Timothy P. (Inventor)

    2008-01-01

    A control system for an electromagnetic rotary drive for bearingless motor-generators comprises a winding configuration comprising a plurality of individual pole pairs through which phase current flows, each phase current producing both a lateral force and a torque. A motor-generator comprises a stator, a rotor supported for movement relative to the stator, and a control system. The motor-generator comprises a winding configuration supported by the stator. The winding configuration comprises at least three pole pairs through which phase current flows resulting in three three-phase systems. Each phase system has a first rotor reference frame axis current that produces a levitating force with no average torque and a second rotor reference frame axis current that produces torque.

  8. 2nd-Order CESE Results For C1.1: Transonic Ringleb Flow

    NASA Technical Reports Server (NTRS)

    Friedlander, David J.

    2015-01-01

    The Conservation Element and Solution Element (CESE) method was used as implemented in the NASA research code ez4d (an unstructured Navier-Stokes solver coded in C++ with serial and parallel versions available.) The CESE method is a time-accurate formulation with flux-conservation in both space and time. The method treats the discretized derivatives of space and time identically and while the 2nd-order accurate version was used, high-order versions exist.

  9. [Employment and education in the 2nd economic and social development plan of Togo].

    PubMed

    Dovi-sodemekou, F B

    1985-01-01

    Togo is a developing country whose population is increasing at the rapid rate of 2.7%/year. Economic development is therefore a necessity to ensure at least an average standard of living. Plans of development include objectives of structural societal changes, including improvements in education and employment. This study analyzes the evolution of population activities. It identifies obstacles to the improvement of education and employment. The investigation examines the employment and education situation before adoption of the 2nd plan of Togo and predicts the probable evolution of the situation. Despite the priority accorded to agriculture, the 2nd plan appears to give greater importance to industry. The industrial and commercial sector has witnessed a 65.2% investment increase, whereas the rural sector had an investment increase of 11.8%. The 2nd plan, in view of its relation to the evolution of economic activities, took into account the demand for manual labor. In the private sector, industries should occupy an important position. The dualism of a modern and a traditional sector is considered a cause of underdevelopment. The modern sector should be developed in order to suppress the traditional sector and allow progress in society. As a result of this approach, agriculture is given a 2ndary role. PMID:12267415

  10. Very large millimeter/submillimeter array toward search for 2nd Earth

    NASA Astrophysics Data System (ADS)

    Iguchi, Satoru; Saito, Masao

    2012-09-01

    ALMA (Atacama Large Millimeter/submillimeter Array) is a revolutionary radio telescope and its early scientific operation has just started. It is expected that ALMA will resolve several cosmic questions and will give us a new cosmic view. Our passion for astronomy naturally goes beyond ALMA because we believe that the 21st-century astronomy should pursue the new scientific frontier. In this conference, we propose a project of the future radio telescope to search for habitable planets and finally detect 2nd Earth as a migratable planet. Detection of 2nd Earth is one of the ultimate dreams not only for astronomers but also for every human being. To directly detect 2nd Earth, we have to carefully design the sensitivity and angular resolution of the telescope by conducting trade-off analysis between the confusion limit and the minimum detectable temperature. The result of the sensitivity analysis is derived assuming an array that has sixty-four (64) 50-m antennas with 25-μm surface accuracy mainly located within the area of 300 km (up to 3000 km), dual-polarization SSB receivers with the best noise temperature performance achieved by ALMA or better, and IF bandwidth of 128 or 256 GHz.. We temporarily name this telescope "Very Large Millimeter/Submillimeter Array (VLMSA)". Since this sensitivity is extremely high, we can have a lot of chances to study the galaxy, star formation, cosmology and of course the new scientific frontier.

  11. Application research on enhancing near-infrared micro-imaging quality by 2nd derivative

    NASA Astrophysics Data System (ADS)

    Wang, Dong; Ma, Zhi-hong; Zhao, Liu; Wang, Bei-hong; Han, Ping; Pan, Li-gang; Wang, Ji-hua

    2013-08-01

    Near-infrared micro-imaging will not only provide the sample's spatial distribution information, but also the spectroscopic information of each pixel. In this thesis, it took the artificial sample of wheat flour and formaldehyde sodium sulfoxylate distribution given for example to research the data processing method for enhancing the quality of near-infrared micro-imaging. Near-infrared spectroscopic feature of wheat flour and formaldehyde sodium sulfoxylate being studied on, compare correlation imaging and 2nd derivative imaging were applied in the imaging processing of the near-infrared micro-image of the artificial sample. Furthermore, the two methods were combined, i.e. 2nd derivative compare correlation imaging was acquired. The result indicated that the difference of the correlation coefficients between the two substances, i.e. wheat flour and formaldehyde sodium sulfoxylate, and the reference spectrum has been increased from 0.001 in compare correlation image to 0.796 in 2nd derivative compare correlation image respectively, which enhances the imaging quality efficiently. This study will, to some extent, be of important reference significance to near-infrared micro-imaging method research of agricultural products and foods.

  12. Thermoelectric power generation system optimization studies

    NASA Astrophysics Data System (ADS)

    Karri, Madhav A.

    A significant amount of energy we consume each year is rejected as waste heat to the ambient. Conservative estimates place the quantity of energy wasted at about 70%. Converting the waste heat into electrical power would be convenient and effective for a number of primary and secondary applications. A viable solution for converting waste heat into electrical energy is to use thermoelectric power conversion. Thermoelectric power generation is based on solid state technology with no moving parts and works on the principle of Seebeck effect. In this work a thermoelectric generator (TEG) system simulator was developed to perform various parametric and system optimization studies. Optimization studies were performed to determine the effect of system size, exhaust and coolant ow conditions, and thermoelectric material on the net gains produced by the TEG system and on the optimum TEG system design. A sports utility vehicle was used as a case study for the application of TEG in mobile systems.

  13. White Paper Summary of 2nd ASTM International Workshop on Hydrides in Zirconium Alloy Cladding

    SciTech Connect

    Sindelar, R.; Louthan, M.; PNNL, B.

    2015-05-29

    This white paper recommends that ASTM International develop standards to address the potential impact of hydrides on the long term performance of irradiated zirconium alloys. The need for such standards was apparent during the 2nd ASTM International Workshop on Hydrides in Zirconium Alloy Cladding and Assembly Components, sponsored by ASTM International Committee C26.13 and held on June 10-12, 2014, in Jackson, Wyoming. The potentially adverse impacts of hydrogen and hydrides on the long term performance of irradiated zirconium-alloy cladding on used fuel were shown to depend on multiple factors such as alloy chemistry and processing, irradiation and post irradiation history, residual and applied stresses and stress states, and the service environment. These factors determine the hydrogen content and hydride morphology in the alloy, which, in turn, influence the response of the alloy to the thermo-mechanical conditions imposed (and anticipated) during storage, transport and disposal of used nuclear fuel. Workshop presentations and discussions showed that although hydrogen/hydride induced degradation of zirconium alloys may be of concern, the potential for occurrence and the extent of anticipated degradation vary throughout the nuclear industry because of the variations in hydrogen content, hydride morphology, alloy chemistry and irradiation conditions. The tools and techniques used to characterize hydrides and hydride morphologies and their impacts on material performance also vary. Such variations make site-to-site comparisons of test results and observations difficult. There is no consensus that a single material or system characteristic (e.g., reactor type, burnup, hydrogen content, end-of life stress, alloy type, drying temperature, etc.) is an effective predictor of material response during long term storage or of performance after long term storage. Multi-variable correlations made for one alloy may not represent the behavior of another alloy exposed to

  14. Third-generation imaging sensor system concepts

    NASA Astrophysics Data System (ADS)

    Reago, Donald A.; Horn, Stuart B.; Campbell, James, Jr.; Vollmerhausen, Richard H.

    1999-07-01

    Second generation forward looking infrared sensors, based on either parallel scanning, long wave (8 - 12 um) time delay and integration HgCdTe detectors or mid wave (3 - 5 um), medium format staring (640 X 480 pixels) InSb detectors, are being fielded. The science and technology community is now turning its attention toward the definition of a future third generation of FLIR sensors, based on emerging research and development efforts. Modeled third generation sensor performance demonstrates a significant improvement in performance over second generation, resulting in enhanced lethality and survivability on the future battlefield. In this paper we present the current thinking on what third generation sensors systems will be and the resulting requirements for third generation focal plane array detectors. Three classes of sensors have been identified. The high performance sensor will contain a megapixel or larger array with at least two colors. Higher operating temperatures will also be the goal here so that power and weight can be reduced. A high performance uncooled sensor is also envisioned that will perform somewhere between first and second generation cooled detectors, but at significantly lower cost, weight, and power. The final third generation sensor is a very low cost micro sensor. This sensor can open up a whole new IR market because of its small size, weight, and cost. Future unattended throwaway sensors, micro UAVs, and helmet mounted IR cameras will be the result of this new class.

  15. Apollo experience report: Power generation system

    NASA Technical Reports Server (NTRS)

    Bell, D., III; Plauche, F. M.

    1973-01-01

    A comprehensive review of the design philosophy and experience of the Apollo electrical power generation system is presented. The review of the system covers a period of 8 years, from conception through the Apollo 12 lunar-landing mission. The program progressed from the definition phase to hardware design, system development and qualification, and, ultimately, to the flight phase. Several problems were encountered; however, a technology evolved that enabled resolution of the problems and resulted in a fully manrated power generation system. These problems are defined and examined, and the corrective action taken is discussed. Several recommendations are made to preclude similar occurrences and to provide a more reliable fuel-cell power system.

  16. OCSEGen: Open Components and Systems Environment Generator

    NASA Technical Reports Server (NTRS)

    Tkachuk, Oksana

    2014-01-01

    To analyze a large system, one often needs to break it into smaller components.To analyze a component or unit under analysis, one needs to model its context of execution, called environment, which represents the components with which the unit interacts. Environment generation is a challenging problem, because the environment needs to be general enough to uncover unit errors, yet precise enough to make the analysis tractable. In this paper, we present a tool for automated environment generation for open components and systems. The tool, called OCSEGen, is implemented on top of the Soot framework. We present the tool's current support and discuss its possible future extensions.

  17. Synchronous generator wind energy conversion control system

    SciTech Connect

    Medeiros, A.L.R.; Lima, A.M.N.; Jacobina, C.B.; Simoes, F.J.

    1996-12-31

    This paper presents the performance evaluation and the design of the control system of a WECS (Wind Energy Conversion System) that employs a synchronous generator based on its digital simulation. The WECS discussed in this paper is connected to the utility grid through two Pulse Width Modulated (PWM) power converters. The structure of the proposed WECS enables us to achieve high performance energy conversion by: (i) maximizing the wind energy capture and (ii) minimizing the reactive power flowing between the grid and the synchronous generator. 8 refs., 19 figs.

  18. Safety monitoring system for radioisotope thermoelectric generators

    NASA Technical Reports Server (NTRS)

    Zoltan, A.

    1973-01-01

    System alerts personnel of hazards which may develop while they are performing tests on radioisotope thermoelectric generator (RTG). Remedial action is initiated to minimize damage. Five operating conditions are monitored: hot junction temperature, cold junction temperature, thermal shroud coolant flow, vacuum in test chamber, and alpha radiation.

  19. An Automatic Chinese Character Maltifont Generating System

    NASA Astrophysics Data System (ADS)

    Jeng, Bor-Shenn; Chang, Kuang-Yao; Liu, Tsann-Shyong; Lin, Jang-Keng; Wu, Tieh-Min; Wu, Yung-Lai; Chang, Gan-How; Yang, Chih-Yen; Tzou, Kou-Hu

    1986-12-01

    In computerized Chinese character printing, it is infeasible to use the fully-formed character approach since there are about 8,000 Chinese characters in common use. Therefore, dot-matrix printing with a large dictionary of binary images of Chinese characters stored in memory is commonly used. To generate these Chinese character patterns in the dot-matrix form by manual operation is tedious. A better approach is to apply image processing techniques to automatically convert the image of a character into its corresponding dot-matrix pattern. We developed a system that can automatically generate a Chinese character multifont. This system includes image processing and CAD subsystems. Each input picture, consisting of about 100 Chinese characters, is scanned by a scanner. The digitized line-scanned image is processed by the image processing subsystem to form the Chinese characters by a dot matrix. The modules of the image processing subsystem include noise reducer, text detector, adaptive threshold, slicer, and size corrector. Due to the effect of quantization error, there are some defects in these digitized Chinese characters. The CAD subsystem is used to trim these characters. The modules of the CAD subsystem include radical extractor, radical classifier , radical generator, radical copier, stroke extractor, and stroke trimmer. This system can automatically generate Chinese characters in a wide range of resolutions ( 24x24 to 240x240 ) and in any specified font, such as Sung style, Ming style, Formal style, Running style, and Script style of Chinese characters. Using the proposed system, we have generated about 160,000 Chinese characters, which consist of five styles in four dif-ferent resolutions. The advantages of this system are time saving, cost saving and high quality.

  20. Advanced IRFPAs for next-generation sensors

    NASA Astrophysics Data System (ADS)

    Caulfield, John T.; Fletcher, Christopher L.; Graham, Roger W.; Patten, Elizabeth A.; Pham, Le T.; Pierce, Gregory; Scribner, Dean A.; Skele, Martins; Taylor, Scott M.; Trautfield, Walter C.

    2004-08-01

    Raytheon Vision Systems (RVS) has invented and demonstrated a new class of advanced focal plane arrays. These Advanced FPAs are sometimes called 3rd Generation or "Next Generation" FPAs because they have integrated onto the FPA the ability to sense multiple IR spectrums, have improved resolution and performance, and conduct image processing on the FPA ROIC. These next generation of FPAs are allowing more functionality and the detection of a more diverse set of data than previously possible with 2nd Gen FPAs. Examples and history of advanced next generation FPAs are reviewed including RVS"s Multispectral, Uncooled, Adaptive Sensors and other advanced sensors.

  1. Next Generation Multimedia Distributed Data Base Systems

    NASA Technical Reports Server (NTRS)

    Pendleton, Stuart E.

    1997-01-01

    The paradigm of client/server computing is changing. The model of a server running a monolithic application and supporting clients at the desktop is giving way to a different model that blurs the line between client and server. We are on the verge of plunging into the next generation of computing technology--distributed object-oriented computing. This is not only a change in requirements but a change in opportunities, and requires a new way of thinking for Information System (IS) developers. The information system demands caused by global competition are requiring even more access to decision making tools. Simply, object-oriented technology has been developed to supersede the current design process of information systems which is not capable of handling next generation multimedia.

  2. Development of a nitrogen generation system

    NASA Technical Reports Server (NTRS)

    Heppner, D. B.; Marshall, R. D.; Powell, J. D., III; Schubert, F. H.

    1980-01-01

    An eight-stage nitrogen generation module was developed. The design integrated a hydrazine catalytic dissociator, three ammonia dissociation stages and four palladium/silver hydrogen separator stages. Alternating ammonia dissociation and hydrogen separation stages are used to remove hydrogen and ammonia formed in the dissociation of hydrazine which results in negligible ammonia and hydrogen concentrations in the product nitrogen stream. An engineering breadboard nitrogen supply subsystem was also developed. It was developed as an integratable subsystem for a central spacecraft air revitalization system. The subsystem consists of the hydrazine storage and feed mechanism, the nitrogen generation module, the peripheral mechanical and electrical components required to control and monitor subsystem performance, and the instrumentation required to interface with other subsystems of an air revitalization system. The breadboard nitrogen supply subsystem was integrated and tested with a one-person capacity experimental air revitalization system. The integration, checkout and testing was successfully accomplished.

  3. PASCAL LR(1) Parser Generator System

    1988-05-04

    LRSYS is a complete LR(1) parser generator system written entirely in a portable subset of Pascal. The system, LRSYS, includes a grammar analyzer program (LR) which reads a context-free (BNF) grammar as input and produces LR(1) parsing tables as output, a lexical analyzer generator (LEX) which reads regular expressions created by the REG process as input and produces lexical tables as output, and various parser skeletons that get merged with the tables to produce completemore » parsers (SMAKE). Current parser skeletons include Pascal, FORTRAN 77, and C. Other language skeletons can easily be added to the system. LRSYS is based on the LR program.« less

  4. Aircraft photovoltaic power-generating system

    NASA Astrophysics Data System (ADS)

    Doellner, Oscar Leonard

    Photovoltaic cells, appropriately cooled and operating in the combustion-created high radiant-intensity environment of gas-turbine and jet engines, may replace the conventional (gearbox-driven) electrical power generators aboard jet aircraft. This study projects significant improvements not only in aircraft electrical power-generating-system performance, but also in overall aircraft performance. Jet-engine design modifications incorporating this concept not only save weight (and thus fuel), but are - in themselves - favorable to jet-engine performance. The dissertation concentrates on operational, constructional, structural, thermal, optical, radiometrical, thin-film, and solid-state theoretical aspects of the overall project.

  5. Protective, Modular Wave Power Generation System

    SciTech Connect

    Vvedensky, Jane M.; Park, Robert Y.

    2012-11-27

    The concept of small wave energy conversion modules that can be built into large, scalable arrays, in the same vein as solar panels, has been developed. This innovation lends itself to an organic business and development model, and enables the use of large-run manufacturing technology to reduce system costs. The first prototype module has been built to full-scale, and tested in a laboratory wave channel. The device has been shown to generate electricity and dissipate wave energy. Improvements need to be made to the electrical generator and a demonstration of an array of modules should be made in natural conditions.

  6. Development of a downhole steam generator system

    SciTech Connect

    Not Available

    1984-04-01

    This report describes the development of a downhole steam generator system for use in enhanced oil recovery. The system is composed of four major components: A state-of-the-art review indicated that advances in technology would be necessary in two areas (high pressure combustion and high temperature packer seals) in order to fabricate a field-worthy system. As a result, two tasks were undertaken which resulted in the development of a novel ceramic-lined combustor and a unique all-metal packer. These elements were incorporated into an overall system design. Key system components were built and tested in the laboratory. The program culminated in a successful simulated downhole test of the entire system, less tube string, at Sandia National Laboratories. 5 references, 41 figures, 9 tables.

  7. Carbon dioxide emissions and the overshoot ratio change resulting from the implementation of 2nd Energy Master Plan in South Korea

    NASA Astrophysics Data System (ADS)

    Yeo, M. J.; Kim, Y. P.

    2015-12-01

    The direction of the energy policies of the country is important in the projection of environmental impacts of the country. The greenhouse gases (GHGs) emission of the energy sector in South Korea is very huge, about 600 MtCO2e in 2011. Also the carbon footprint due to the energy consumption contributes to the ecological footprint is also large, more than 60%. Based on the official plans (the national greenhouse gases emission reduction target for 2030 (GHG target for 2030) and the 2nd Energy Master Plan (2nd EMP)), several scenarios were proposed and the sensitivity of the GHG emission amount and 'overshoot ratio' which is the ratio of ecological footprint to biocapacity were estimated. It was found that to meet the GHG target for 2030 the ratio of non-emission energy for power generation should be over 71% which would be very difficult. We also found that the overshoot ratio would increase from 5.9 in 2009 to 7.6 in 2035. Thus, additional efforts are required to reduce the environmental burdens in addition to optimize the power mix configuration. One example is the conversion efficiency in power generation. If the conversion efficiency in power generation rises up 50% from the current level, 40%, the energy demand and resultant carbon dioxide emissions would decrease about 10%. Also the influence on the environment through changes in consumption behavior, for example, the diet choice is expected to be meaningful.

  8. PREFACE: 2nd International Conference on Innovative Materials, Structures and Technologies

    NASA Astrophysics Data System (ADS)

    Ručevskis, Sandris

    2015-11-01

    The 2nd International Conference on Innovative Materials, Structures and Technologies (IMST 2015) took place in Riga, Latvia from 30th September - 2nd October, 2015. The first event of the conference series, dedicated to the 150th anniversary of the Faculty of Civil Engineering of Riga Technical University, was held in 2013. Following the established tradition, the aim of the conference was to promote and discuss the latest results of industrial and academic research carried out in the following engineering fields: analysis and design of advanced structures and buildings; innovative, ecological and energy efficient building materials; maintenance, inspection and monitoring methods; construction technologies; structural management; sustainable and safe transport infrastructure; and geomatics and geotechnics. The conference provided an excellent opportunity for leading researchers, representatives of the industrial community, engineers, managers and students to share the latest achievements, discuss recent advances and highlight the current challenges. IMST 2015 attracted over 120 scientists from 24 countries. After rigorous reviewing, over 80 technical papers were accepted for publication in the conference proceedings. On behalf of the organizing committee I would like to thank all the speakers, authors, session chairs and reviewers for their efficient and timely effort. The 2nd International Conference on Innovative Materials, Structures and Technologies was organized by the Faculty of Civil Engineering of Riga Technical University with the support of the Latvia State Research Programme under the grant agreement "INNOVATIVE MATERIALS AND SMART TECHNOLOGIES FOR ENVIRONMENTAL SAFETY, IMATEH". I would like to express sincere gratitude to Juris Smirnovs, Dean of the Faculty of Civil Engineering, and Andris Chate, manager of the Latvia State Research Programme. Finally, I would like to thank all those who helped to make this event happen. Special thanks go to Diana

  9. PREFACE: 2nd International Meeting for Researchers in Materials and Plasma Technology

    NASA Astrophysics Data System (ADS)

    Niño, Ely Dannier V.

    2013-11-01

    These proceedings present the written contributions of the participants of the 2nd International Meeting for Researchers in Materials and Plasma Technology, 2nd IMRMPT, which was held from February 27 to March 2, 2013 at the Pontificia Bolivariana Bucaramanga-UPB and Santander and Industrial - UIS Universities, Bucaramanga, Colombia, organized by research groups from GINTEP-UPB, FITEK-UIS. The IMRMPT, was the second version of biennial meetings that began in 2011. The three-day scientific program of the 2nd IMRMPT consisted in 14 Magisterial Conferences, 42 Oral Presentations and 48 Poster Presentations, with the participation of undergraduate and graduate students, professors, researchers and entrepreneurs from Colombia, Russia, France, Venezuela, Brazil, Uruguay, Argentina, Peru, Mexico, United States, among others. Moreover, the objective of IMRMPT was to bring together national and international researchers in order to establish scientific cooperation in the field of materials science and plasma technology; introduce new techniques of surface treatment of materials to improve properties of metals in terms of the deterioration due to corrosion, hydrogen embrittlement, abrasion, hardness, among others; and establish cooperation agreements between universities and industry. The topics covered in the 2nd IMRMPT include New Materials, Surface Physics, Laser and Hybrid Processes, Characterization of Materials, Thin Films and Nanomaterials, Surface Hardening Processes, Wear and Corrosion / Oxidation, Modeling, Simulation and Diagnostics, Plasma Applications and Technologies, Biomedical Coatings and Surface Treatments, Non Destructive Evaluation and Online Process Control, Surface Modification (Ion Implantation, Ion Nitriding, PVD, CVD). The editors hope that those interested in the are of materials science and plasma technology, enjoy the reading that reflect a wide range of topics. It is a pleasure to thank the sponsors and all the participants and contributors for

  10. [Model and enlightenment from rescue of August 2nd Kunshan explosion casualty].

    PubMed

    Tan, Q; Qiu, H B; Sun, B W; Shen, Y M; Nie, L J; Zhang, H W

    2016-01-01

    On August 2nd, 2014, a massive dust explosion occurred in a factory of Kunshan, resulting in a mass casualty involving 185 burn patients. They were transported to 20 medical institutions in Jiangsu province and Shanghai. More than one thousand of medical personnel of our country participated in this emergency rescue, and satisfactory results were achieved. In this paper, the characteristics of this accident were analyzed, the positive effects of interdisciplinary cooperation were affirmed, and the contingency plan, rescue process and pattern, and reserve, organization and management of talents during this rescue process were reviewed retrospectively. PMID:27426066

  11. Easy Glide in a Coarse-Grained Mg-2Zn-2Nd Alloy

    NASA Astrophysics Data System (ADS)

    Wang, Tong; Jonas, John J.; Yue, Stephen

    2016-08-01

    Compression tests were performed at 673 K (400 °C) on a Mg-2Zn-2Nd alloy at the strain rates of 0.1, 0.01, and 0.001/s. The 0.1 and 0.01/s flow curves displayed work hardening to a peak stress at around 0.2 true strain. However, testing at 0.001/s led to steady-state flow at about 22 MPa from 0.03 true strain onwards. Such a steady-state flow is attributed to the predominance of basal slip under these conditions.

  12. The ratio of 2nd to 4th digit length: a new predictor of disease predisposition?

    PubMed

    Manning, J T; Bundred, P E

    2000-05-01

    The ratio between the length of the 2nd and 4th digits is: (a) fixed in utero; (b) lower in men than in women; (c) negatively related to testosterone and sperm counts; and (d) positively related to oestrogen concentrations. Prenatal levels of testosterone and oestrogen have been implicated in infertility, autism, dyslexia, migraine, stammering, immune dysfunction, myocardial infarction and breast cancer. We suggest that 2D:4D ratio is predictive of these diseases and may be used in diagnosis, prognosis and in early life-style interventions which may delay the onset of disease or facilitate its early detection. PMID:10859702

  13. [Infected chorionic hematoma as a cause of infection in the 2nd trimester].

    PubMed

    Weigel, M; Friese, K; Schmitt, W; Strittmatter, H J; Melchert, F

    1992-12-01

    Superinfected subchorionic haematomas are a rare septic focus in the 2nd trimenon. Symptoms being unspecific, the diagnosis has to be made by exclusion, in most cases. As the changes of a successful treatment of the manifest infection is poor, antibiotic prophylaxis as well as close laboratory controls and early antibiotic therapy should be discussed after sonographic diagnosis of an intrauterine haematoma. Two of our three patients reported on having suffered a miscarriage; only one pregnancy could be maintained after spontaneous depletion of the infected haemorrhage. PMID:1490559

  14. Generation adequacy assessment of power systems with significant wind generation: A system planning and operations perspective

    NASA Astrophysics Data System (ADS)

    D'Annunzio, Claudine

    One of the great challenges to increasing the use of wind generation is the need to ensure generation adequacy. In this dissertation, we address that need by investigating and assessing the planning and operational generation adequacy of power systems with significant wind generation. At the onset of this dissertation, key metrics are presented for determining a power system's generation adequacy assessment based on loss-of-load analytical methods. With these key metrics understood, a detailed methodology is put forward on how to integrate wind plants in the assessment's framework. Then, through the examination of a case study, we demonstrate that wind generation does contribute capacity to the system generation adequacy. Indeed, results indicates that at wind penetration levels of less than 5%, a wind plant's reliability impact is comparable to an energy equivalent conventional unit. We then show how to quantify a wind plant's capacity contribution by using the effective load carrying capability metric (ELCC), providing a detailed description of how to implement this metric in the context of wind generation. However, as certain computational setbacks are inherent to the metric, a novel noniterative approximation is proposed and applied to various case studies. The accuracy of the proposed approximation is evaluated in a comparative study by contrasting the resulting estimates to conventionally-computed ELCC values and the wind plant's capacity factor. The non-iterative method is shown to yield accurate ELCC estimates with relative errors averaging around 2%. Case study findings also suggest the importance of period-specific ELCC calculations to better evaluate the variable capacity contribution of wind plants. Even when considering a well-planned system in which wind generation has been appropriately integrated in the adequacy assessment, wind plants do create significant challenges in maintaining generation adequacy on an operational level. To address these

  15. Condition monitoring system of wind turbine generators

    NASA Astrophysics Data System (ADS)

    Abdusamad, Khaled B.

    The development and implementation of the condition monitoring systems (CMS) play a significant role in overcoming the number of failures in the wind turbine generators that result from the harsh operation conditions, such as over temperature, particularly when turbines are deployed offshore. In order to increase the reliability of the wind energy industry, monitoring the operation conditions of wind generators is essential to detect the immediate faults rapidly and perform appropriate preventative maintenance. CMS helps to avoid failures, decrease the potential shutdowns while running, reduce the maintenance and operation costs and maintain wind turbines protected. The knowledge of wind turbine generators' faults, such as stator and rotor inter-turn faults, is indispensable to perform the condition monitoring accurately, and assist with maintenance decision making. Many techniques are utilized to avoid the occurrence of failures in wind turbine generators. The majority of the previous techniques that are applied to monitor the wind generator conditions are based on electrical and mechanical concepts and theories. An advanced CMS can be implemented by using a variety of different techniques and methods to confirm the validity of the obtained electrical and mechanical condition monitoring algorithms. This thesis is focused on applying CMS on wind generators due to high temperature by contributing the statistical, thermal, mathematical, and reliability analyses, and mechanical concepts with the electrical methodology, instead of analyzing the electrical signal and frequencies trends only. The newly developed algorithms can be compared with previous condition monitoring methods, which use the electrical approach in order to establish their advantages and limitations. For example, the hazard reliability techniques of wind generators based on CMS are applied to develop a proper maintenance strategy, which aims to extend the system life-time and reduce the potential

  16. Electronic data generation and display system

    NASA Technical Reports Server (NTRS)

    Wetekamm, Jules

    1988-01-01

    The Electronic Data Generation and Display System (EDGADS) is a field tested paperless technical manual system. The authoring provides subject matter experts the option of developing procedureware from digital or hardcopy inputs of technical information from text, graphics, pictures, and recorded media (video, audio, etc.). The display system provides multi-window presentations of graphics, pictures, animations, and action sequences with text and audio overlays on high resolution color CRT and monochrome portable displays. The database management system allows direct access via hierarchical menus, keyword name, ID number, voice command or touch of a screen pictoral of the item (ICON). It contains operations and maintenance technical information at three levels of intelligence for a total system.

  17. Performance of a dynamic atmosphere generation system

    SciTech Connect

    Nano, G.; Borroni, A.; Mazza, B.

    1987-09-01

    A controlled test atmosphere system for gaseous pollutants was designed and constructed. For a reliable characterization of indoor air pollution, a suitable set of sampling and analysis procedures has to be devised and accomplished. The precision and accuracy of the measurements must be determined exactly for a correct interpretation of the results. The two main difficulties appear to be the actual generation of the individual standard and the preparations of physico-chemically thoroughly characterized mixtures. This system utilized two methods for generation of dynamic standards: permeation tubes and gas saturators. Special care also was devoted to the achievement of both a good time stability of the concentration of the standard mixtures and a satisfactory agreement between expected and measured concentration values.

  18. Plasma generators, reactor systems and related methods

    DOEpatents

    Kong, Peter C.; Pink, Robert J.; Lee, James E.

    2007-06-19

    A plasma generator, reactor and associated systems and methods are provided in accordance with the present invention. A plasma reactor may include multiple sections or modules which are removably coupled together to form a chamber. Associated with each section is an electrode set including three electrodes with each electrode being coupled to a single phase of a three-phase alternating current (AC) power supply. The electrodes are disposed about a longitudinal centerline of the chamber and are arranged to provide and extended arc and generate an extended body of plasma. The electrodes are displaceable relative to the longitudinal centerline of the chamber. A control system may be utilized so as to automatically displace the electrodes and define an electrode gap responsive to measure voltage or current levels of the associated power supply.

  19. A second-generation mobile satellite system

    NASA Technical Reports Server (NTRS)

    Sue, M. K.; Park, Y. H.

    1986-01-01

    A design for a low-user-cost, 9000 channel capacity second generation mobile satellite system (Msat-2) for continental U.S., Alaska and Canada using two geostationary satellites at 90 and 130 deg west longitude, is presented. The increased capacity over the first generation system is obtained by use of a 20 m deployable antenna with an offset-fed antenna configuration, a high-power satellite bus, and by relaxing the north-south stationkeeping requirement to + or - 2 deg and the eclipse capability to 50 percent. Efficient frequency utilization is achieved for uplink and downlink spectra by a 7-frequency reuse scheme with 285 5-kHz channels per subband, and subband reuse of up to four times. Problems of interbeam interference and multipath fading contributed to the choice of a nonoverlapping feed for the Msat-2, and a proper modulation scheme using Gaussian baseband filtered minimum-shift-keying with differential detection.

  20. Pulsed Energy Systems for Generating Plasmas

    NASA Technical Reports Server (NTRS)

    Rose, M. Franklin; Shotts, Z.

    2005-01-01

    This paper will describe the techniques needed to electrically generate highly ionized dense plasmas for a variety of applications. The components needed in pulsed circuits are described in terms of general performance parameters currently available from commercial vendors. Examples of pulsed systems using these components are described and technical data from laboratory experiments presented. Experimental data are given for point designs, capable of multi-megawatt power levels.

  1. Implementation of optimum solar electricity generating system

    NASA Astrophysics Data System (ADS)

    Singh, Balbir Singh Mahinder; Sivapalan, Subarna; Najib, Nurul Syafiqah Mohd; Menon, Pradeep; Karim, Samsul Ariffin A.

    2014-10-01

    Under the 10th Malaysian Plan, the government is expecting the renewable energy to contribute approximately 5.5% to the total electricity generation by the year 2015, which amounts to 98MW. One of the initiatives to ensure that the target is achievable was to establish the Sustainable Energy Development Authority of Malaysia. SEDA is given the authority to administer and manage the implementation of the feed-in tariff (FiT) mechanism which is mandated under the Renewable Energy Act 2011. The move to establish SEDA is commendable and the FiT seems to be attractive but there is a need to create awareness on the implementation of the solar electricity generating system (SEGS). In Malaysia, harnessing technologies related to solar energy resources have great potential for implementation. However, the main issue that plagues the implementation of SEGS is the intermittent nature of this source of energy. The availability of sunlight is during the day time, and there is a need for electrical energy storage system, so that there is electricity available during the night time as well. The meteorological condition such as clouds, haze and pollution affects the SEGS as well. The PV based SEGS is seems to be promising electricity generating system that can contribute towards achieving the 5.5% target and will be able to minimize the negative effects of utilizing fossil fuels for electricity generation on the environment. Malaysia is committed to Kyoto Protocol, which emphasizes on fighting global warming by achieving stabilization of greenhouse gas concentrations in the atmosphere at a level that would prevent dangerous anthropogenic interference with the climate system. In this paper, the technical aspects of the implementation of optimum SEGS is discussed, especially pertaining to the positioning of the PV panels.

  2. Implementation of optimum solar electricity generating system

    SciTech Connect

    Singh, Balbir Singh Mahinder Karim, Samsul Ariffin A.; Sivapalan, Subarna; Najib, Nurul Syafiqah Mohd; Menon, Pradeep

    2014-10-24

    Under the 10{sup th} Malaysian Plan, the government is expecting the renewable energy to contribute approximately 5.5% to the total electricity generation by the year 2015, which amounts to 98MW. One of the initiatives to ensure that the target is achievable was to establish the Sustainable Energy Development Authority of Malaysia. SEDA is given the authority to administer and manage the implementation of the feed-in tariff (FiT) mechanism which is mandated under the Renewable Energy Act 2011. The move to establish SEDA is commendable and the FiT seems to be attractive but there is a need to create awareness on the implementation of the solar electricity generating system (SEGS). In Malaysia, harnessing technologies related to solar energy resources have great potential for implementation. However, the main issue that plagues the implementation of SEGS is the intermittent nature of this source of energy. The availability of sunlight is during the day time, and there is a need for electrical energy storage system, so that there is electricity available during the night time as well. The meteorological condition such as clouds, haze and pollution affects the SEGS as well. The PV based SEGS is seems to be promising electricity generating system that can contribute towards achieving the 5.5% target and will be able to minimize the negative effects of utilizing fossil fuels for electricity generation on the environment. Malaysia is committed to Kyoto Protocol, which emphasizes on fighting global warming by achieving stabilization of greenhouse gas concentrations in the atmosphere at a level that would prevent dangerous anthropogenic interference with the climate system. In this paper, the technical aspects of the implementation of optimum SEGS is discussed, especially pertaining to the positioning of the PV panels.

  3. NEXT GENERATION GAS TURBINE SYSTEMS STUDY

    SciTech Connect

    Benjamin C. Wiant; Ihor S. Diakunchak; Dennis A. Horazak; Harry T. Morehead

    2003-03-01

    Under sponsorship of the U.S. Department of Energy's National Energy Technology Laboratory, Siemens Westinghouse Power Corporation has conducted a study of Next Generation Gas Turbine Systems that embraces the goals of the DOE's High Efficiency Engines and Turbines and Vision 21 programs. The Siemens Westinghouse Next Generation Gas Turbine (NGGT) Systems program was a 24-month study looking at the feasibility of a NGGT for the emerging deregulated distributed generation market. Initial efforts focused on a modular gas turbine using an innovative blend of proven technologies from the Siemens Westinghouse W501 series of gas turbines and new enabling technologies to serve a wide variety of applications. The flexibility to serve both 50-Hz and 60-Hz applications, use a wide range of fuels and be configured for peaking, intermediate and base load duty cycles was the ultimate goal. As the study progressed the emphasis shifted from a flexible gas turbine system of a specific size to a broader gas turbine technology focus. This shift in direction allowed for greater placement of technology among both the existing fleet and new engine designs, regardless of size, and will ultimately provide for greater public benefit. This report describes the study efforts and provides the resultant conclusions and recommendations for future technology development in collaboration with the DOE.

  4. Increasing the water temperature of a 2nd order stream reach: Hydraulic aspects of a whole-stream manipulative experiment

    NASA Astrophysics Data System (ADS)

    de Lima, João L. M. P.; Canhoto, Cristina

    2015-04-01

    What will happen when water temperatures of streams increases, due to climate changes or in connection with rapidly changing human systems? Trying to answer to this question a whole-stream manipulative experiment was undertaken, where an increase in water temperature was artificially induced on a 2nd order stream reach. The main objective of this poster is to describe this experiment focusing on the design of the hydraulic system. The system maintained a steady flow while allowing natural variation in abiotic factors and was successfully used to evaluate the effects of warming on a stream ecosystem at several levels of biological organization. A constant flow of stream water was controlled by a hydraulic setup (~22m long; ~1.5m width) subdivided into two independent channels. One channel of the study reach received heated water (~3°C above the other), while the other received water at stream ambient temperature. The warming system maintained a steady gravity controlled flow making use of weirs and valves.

  5. Goldstone Solar System Radar Waveform Generator

    NASA Technical Reports Server (NTRS)

    Quirk, Kevin J.; Patawaran, Ferze D.; Nguyen, Danh H.; Nguyen, Huy

    2012-01-01

    Due to distances and relative motions among the transmitter, target object, and receiver, the time-base between any transmitted and received signal will undergo distortion. Pre-distortion of the transmitted signal to compensate for this time-base distortion allows reception of an undistorted signal. In most radar applications, an arbitrary waveform generator (AWG) would be used to store the pre-calculated waveform and then play back this waveform during transmission. The Goldstone Solar System Radar (GSSR), however, has transmission durations that exceed the available memory storage of such a device. A waveform generator capable of real-time pre-distortion of a radar waveform to a given time-base distortion function is needed. To pre-distort the transmitted signal, both the baseband radar waveform and the RF carrier must be modified. In the GSSR, this occurs at the up-conversion mixing stage to an intermediate frequency (IF). A programmable oscillator (PO) is used to generate the IF along with a time-varying phase component that matches the time-base distortion of the RF carrier. This serves as the IF input to the waveform generator where it is mixed with a baseband radar waveform whose time-base has been distorted to match the given time-base distortion function producing the modulated IF output. An error control feedback loop is used to precisely control the time-base distortion of the baseband waveform, allowing its real-time generation. The waveform generator produces IF modulated radar waveforms whose time-base has been pre-distorted to match a given arbitrary function. The following waveforms are supported: continuous wave (CW), frequency hopped (FH), binary phase code (BPC), and linear frequency modulation (LFM). The waveform generator takes as input an IF with a time varying phase component that matches the time-base distortion of the carrier. The waveform generator supports interconnection with deep-space network (DSN) timing and frequency standards, and

  6. FOREWORD: 2nd International Workshop on New Computational Methods for Inverse Problems (NCMIP 2012)

    NASA Astrophysics Data System (ADS)

    Blanc-Féraud, Laure; Joubert, Pierre-Yves

    2012-09-01

    Conference logo This volume of Journal of Physics: Conference Series is dedicated to the scientific contributions presented during the 2nd International Workshop on New Computational Methods for Inverse Problems, (NCMIP 2012). This workshop took place at Ecole Normale Supérieure de Cachan, in Cachan, France, on 15 May 2012, at the initiative of Institut Farman. The first edition of NCMIP also took place in Cachan, France, within the scope of the ValueTools Conference, in May 2011 (http://www.ncmip.org/2011/). The NCMIP Workshop focused on recent advances in the resolution of inverse problems. Indeed inverse problems appear in numerous scientific areas such as geophysics, biological and medical imaging, material and structure characterization, electrical, mechanical and civil engineering, and finance. The resolution of inverse problems consists of estimating the parameters of the observed system or structure from data collected by an instrumental sensing or imaging device. Its success firstly requires the collection of relevant observation data. It also requires accurate models describing the physical interactions between the instrumental device and the observed system, as well as the intrinsic properties of the solution itself. Finally, it requires the design of robust, accurate and efficient inversion algorithms. Advanced sensor arrays and imaging devices provide high rate and high volume data; in this context, the efficient resolution of the inverse problem requires the joint development of new models and inversion methods, taking computational and implementation aspects into account. During this one-day workshop, researchers had the opportunity to bring to light and share new techniques and results in the field of inverse problems. The topics of the workshop were: algorithms and computational aspects of inversion, Bayesian estimation, kernel methods, learning methods, convex optimization, free discontinuity problems, metamodels, proper orthogonal decomposition

  7. Comparison of Next-Generation Sequencing Systems

    PubMed Central

    Liu, Lin; Li, Yinhu; Li, Siliang; Hu, Ni; He, Yimin; Pong, Ray; Lin, Danni; Lu, Lihua; Law, Maggie

    2012-01-01

    With fast development and wide applications of next-generation sequencing (NGS) technologies, genomic sequence information is within reach to aid the achievement of goals to decode life mysteries, make better crops, detect pathogens, and improve life qualities. NGS systems are typically represented by SOLiD/Ion Torrent PGM from Life Sciences, Genome Analyzer/HiSeq 2000/MiSeq from Illumina, and GS FLX Titanium/GS Junior from Roche. Beijing Genomics Institute (BGI), which possesses the world's biggest sequencing capacity, has multiple NGS systems including 137 HiSeq 2000, 27 SOLiD, one Ion Torrent PGM, one MiSeq, and one 454 sequencer. We have accumulated extensive experience in sample handling, sequencing, and bioinformatics analysis. In this paper, technologies of these systems are reviewed, and first-hand data from extensive experience is summarized and analyzed to discuss the advantages and specifics associated with each sequencing system. At last, applications of NGS are summarized. PMID:22829749

  8. SNAP-8 electrical generating system development program

    NASA Technical Reports Server (NTRS)

    1971-01-01

    The SNAP-8 program has developed the technology base for one class of multikilowatt dynamic space power systems. Electrical power is generated by a turbine-alternator in a mercury Rankine-cycle loop to which heat is transferred and removed by means of sodium-potassium eutectic alloy subsystems. Final system overall criteria include a five-year operating life, restartability, man rating, and deliverable power in the 90 kWe range. The basic technology was demonstrated by more than 400,000 hours of major component endurance testing and numerous startup and shutdown cycles. A test system, comprised of developed components, delivered up to 35 kWe for a period exceeding 12,000 hours. The SNAP-8 system baseline is considered to have achieved a level of technology suitable for final application development for long-term multikilowatt space missions.

  9. Next Generation CAD/CAM/CAE Systems

    NASA Technical Reports Server (NTRS)

    Noor, Ahmed K. (Compiler); Malone, John B. (Compiler)

    1997-01-01

    This document contains presentations from the joint UVA/NASA Workshop on Next Generation CAD/CAM/CAE Systems held at NASA Langley Research Center in Hampton, Virginia on March 18-19, 1997. The presentations focused on current capabilities and future directions of CAD/CAM/CAE systems, aerospace industry projects, and university activities related to simulation-based design. Workshop attendees represented NASA, commercial software developers, the aerospace industry, government labs, and academia. The workshop objectives were to assess the potential of emerging CAD/CAM/CAE technology for use in intelligent simulation-based design and to provide guidelines for focused future research leading to effective use of CAE systems for simulating the entire life cycle of aerospace systems.

  10. Editorial: 2nd Special Issue on behavior change, health, and health disparities.

    PubMed

    Higgins, Stephen T

    2015-11-01

    This Special Issue of Preventive Medicine (PM) is the 2nd that we have organized on behavior change, health, and health disparities. This is a topic of fundamental importance to improving population health in the U.S. and other industrialized countries that are trying to more effectively manage chronic health conditions. There is broad scientific consensus that personal behavior patterns such as cigarette smoking, other substance abuse, and physical inactivity/obesity are among the most important modifiable causes of chronic disease and its adverse impacts on population health. As such behavior change needs to be a key component of improving population health. There is also broad agreement that while these problems extend across socioeconomic strata, they are overrepresented among more economically disadvantaged populations and contribute directly to the growing problem of health disparities. Hence, behavior change represents an essential step in curtailing that unsettling problem as well. In this 2nd Special Issue, we devote considerable space to the current U.S. prescription opioid addiction epidemic, a crisis that was not addressed in the prior Special Issue. We also continue to devote attention to the two largest contributors to preventable disease and premature death, cigarette smoking and physical inactivity/obesity as well as risks of co-occurrence of these unhealthy behavior patterns. Across each of these topics we included contributions from highly accomplished policy makers and scientists to acquaint readers with recent accomplishments as well as remaining knowledge gaps and challenges to effectively managing these important chronic health problems. PMID:26257372

  11. The relation between 1st grade grey matter volume and 2nd grade math competence.

    PubMed

    Price, Gavin R; Wilkey, Eric D; Yeo, Darren J; Cutting, Laurie E

    2016-01-01

    Mathematical and numerical competence is a critical foundation for individual success in modern society yet the neurobiological sources of individual differences in math competence are poorly understood. Neuroimaging research over the last decade suggests that neural mechanisms in the parietal lobe, particularly the intraparietal sulcus (IPS) are structurally aberrant in individuals with mathematical learning disabilities. However, whether those same brain regions underlie individual differences in math performance across the full range of math abilities is unknown. Furthermore, previous studies have been exclusively cross-sectional, making it unclear whether variations in the structure of the IPS are caused by or consequences of the development of math skills. The present study investigates the relation between grey matter volume across the whole brain and math competence longitudinally in a representative sample of 50 elementary school children. Results show that grey matter volume in the left IPS at the end of 1st grade relates to math competence a year later at the end of 2nd grade. Grey matter volume in this region did not change over that year, and was still correlated with math competence at the end of 2nd grade. These findings support the hypothesis that the IPS and its associated functions represent a critical foundation for the acquisition of mathematical competence. PMID:26334946

  12. Editorial: 2nd Special Issue on behavior change, health, and health disparities

    PubMed Central

    Higgins, Stephen T.

    2016-01-01

    This Special Issue of Preventive Medicine (PM) is the 2nd that we have organized on behavior change, health, and health disparities. This is a topic of fundamental importance to improving population health in the U.S. and other industrialized countries that are trying to more effectively manage chronic health conditions. There is broad scientific consensus that personal behavior patterns such as cigarette smoking, other substance abuse, and physical inactivity/obesity are among the most important modifiable causes of chronic disease and its adverse impacts on population health. As such behavior change needs to be a key component of improving population health. There is also broad agreement that while these problems extend across socioeconomic strata, they are overrepresented among more economically disadvantaged populations and contribute directly to the growing problem of health disparities. Hence, behavior change represents an essential step in curtailing that unsettling problem as well. In this 2nd Special Issue, we devote considerable space to the current U.S. prescription opioid addiction epidemic, a crisis that was not addressed in the prior Special Issue. We also continue to devote attention to the two largest contributors to preventable disease and premature death, cigarette smoking and physical inactivity/obesity as well as risks of co-occurrence of these unhealthy behavior patterns. Across each of these topics we included contributions from highly accomplished policymakers and scientists to acquaint readers with recent accomplishments as well as remaining knowledge gaps and challenges to effectively managing these important chronic health problems. PMID:26257372

  13. Criteria for evaluation of grid generation systems

    NASA Technical Reports Server (NTRS)

    Ascoli, Edward P.; Barson, Steven L.; Decroix, Michele E.; Hsu, Wayne W.

    1993-01-01

    Many CFD grid generation systems are in use nationally, but few comparative studies have been performed to quantify their relative merits. A study was undertaken to systematically evaluate and select the best CFD grid generation codes available. Detailed evaluation criteria were established as the basis for the evaluation conducted. Descriptions of thirty-four separate criteria, grouped into eight general categories are provided. Benchmark test cases, developed to test basic features of selected codes, are described in detail. Scoring guidelines were generated to establish standards for measuring code capabilities, ensuring uniformity of ratings, and minimizing personal bias among the three code evaluators. Ten candidate codes were identified from government, industry, universities, and commercial software companies. A three phase evaluation was conducted. In Phase 1, ten codes identified were screened through conversations with code authors and other industry experts. Seven codes were carried forward into a Phase 2 evaluation in which all codes were scored according to the predefined criteria. Two codes emerged as being significantly better than the others: RAGGS and GRIDGEN. Finally, these two codes were carried forward into a Phase 3 evaluation in which complex 3-D multizone grids were generated to verify capability.

  14. SOFC combined cycle systems for distributed generation

    SciTech Connect

    Brown, R.A.

    1997-05-01

    The final phase of the tubular SOFC development program will focus on the development and demonstration of pressurized solid oxide fuel cell (PSOFC)/gas turbine (GT) combined cycle power systems for distributed power applications. The commercial PSOFC/GT product line will cover the power range 200 kWe to 50 MWe, and the electrical efficiency for these systems will range from 60 to 75% (net AC/LHV CH4), the highest of any known fossil fueled power generation technology. The first demonstration of a pressurized solid oxide fuel cell/gas turbine combined cycle will be a proof-of-concept 250 kWe PSOFC/MTG power system consisting of a single 200 kWe PSOFC module and a 50 kWe microturbine generator (MTG). The second demonstration of this combined cycle will be 1.3 MWe fully packaged, commercial prototype PSOFC/GT power system consisting of two 500 kWe PSOFC modules and a 300 kWe gas turbine.

  15. Development of Hydrologic Characterization Technology of Fault Zones -- Phase I, 2nd Report

    SciTech Connect

    Karasaki, Kenzi; Onishi, Tiemi; Black, Bill; Biraud, Sebastien

    2009-03-31

    This is the year-end report of the 2nd year of the NUMO-LBNL collaborative project: Development of Hydrologic Characterization Technology of Fault Zones under NUMO-DOE/LBNL collaboration agreement, the task description of which can be found in the Appendix 3. Literature survey of published information on the relationship between geologic and hydrologic characteristics of faults was conducted. The survey concluded that it may be possible to classify faults by indicators based on various geometric and geologic attributes that may indirectly relate to the hydrologic property of faults. Analysis of existing information on the Wildcat Fault and its surrounding geology was performed. The Wildcat Fault is thought to be a strike-slip fault with a thrust component that runs along the eastern boundary of the Lawrence Berkeley National Laboratory. It is believed to be part of the Hayward Fault system but is considered inactive. Three trenches were excavated at carefully selected locations mainly based on the information from the past investigative work inside the LBNL property. At least one fault was encountered in all three trenches. Detailed trench mapping was conducted by CRIEPI (Central Research Institute for Electric Power Industries) and LBNL scientists. Some intriguing and puzzling discoveries were made that may contradict with the published work in the past. Predictions are made regarding the hydrologic property of the Wildcat Fault based on the analysis of fault structure. Preliminary conceptual models of the Wildcat Fault were proposed. The Wildcat Fault appears to have multiple splays and some low angled faults may be part of the flower structure. In parallel, surface geophysical investigations were conducted using electrical resistivity survey and seismic reflection profiling along three lines on the north and south of the LBNL site. Because of the steep terrain, it was difficult to find optimum locations for survey lines as it is desirable for them to be as

  16. Next generation low cost wet FGD system

    SciTech Connect

    Klingspor, J.S.; Bresowar, G.E.

    1995-12-31

    Limestone based wet flue gas desulfurization (FGD) has been the dominating control technology since the introduction of the clean air act and is projected to be the preferred FGD technology for the foreseeable future. Following the introduction of wet FGD systems in the late `60s, the technology quickly reached maturity with only incremental improvements during recent years. However, deregulation, emission trading, and market forces have demanded significant improvements in capital and operating costs, performance, environmental impact, ease of retrofit and cycle time. In response to market demands, ABB has developed a new generation wet FGD system, named LS-2, based on the traditional open spray tower technology. The development of the LS-2 system has progressed methodically within the ABB R and D community within the last three years and is currently being demonstrated at Ohio Edison`s Niles station. The LS-2 system features cost savings and performance improvements never before demonstrated in wet FGD systems. The cost level of the LS-2 system will make it a clear alternative to fuel switching when applied in a manner similar to the installation at Niles. The economics of the LS-2 system is discussed in some detail.

  17. Fourth-generation photovoltaic concentrator system development

    SciTech Connect

    O`Neill, M.J.; McDanal, A.J.

    1995-10-01

    In 1991, under a contract with Sandia for the Concentrator Initiative, the ENTECH team initiated the design and development of a fourth-generation concentrator module. In 1992, Sandia also contracted with ENTECH to develop a new control and drive system for the ENTECH array. This report documents the design and development work performed under both contracts. Manufacturing processes for the new module were developed at the same time under a complementary PVMaT contract with the National Renewable Energy Laboratory. Two 100-kW power plants were deployed in 1995 in Texas using the newly developed fourth-generation concentrator technology, one at the CSW Solar Park near Ft. Davis and one at TUE Energy Park in Dallas. Technology developed under the Sandia contracts has made a successful transition from the laboratory to the production line to the field.

  18. Next Generation Flight Controller Trainer System

    NASA Technical Reports Server (NTRS)

    Arnold, Scott; Barry, Matthew R.; Benton, Isaac; Bishop, Michael M.; Evans, Steven; Harvey, Jason; King, Timothy; Martin, Jacob; Mercier, Al; Miller, Walt; Payne, Dan L.; Phu, Hanh; Thompson, James C.; Aadsen, Ron

    2008-01-01

    The Next Generation Flight Controller Trainer (NGFCT) is a relatively inexpensive system of hardware and software that provides high-fidelity training for spaceshuttle flight controllers. NGFCT provides simulations into which are integrated the behaviors of emulated space-shuttle vehicle onboard general-purpose computers (GPCs), mission-control center (MCC) displays, and space-shuttle systems as represented by high-fidelity shuttle mission simulator (SMS) mathematical models. The emulated GPC computers enable the execution of onboard binary flight-specific software. The SMS models include representations of system malfunctions that can be easily invoked. The NGFCT software has a flexible design that enables independent updating of its GPC, SMS, and MCC components.

  19. Next generation low cost wet FGD system

    SciTech Connect

    Klingspor, J.S.; Bresowar, G.E.; Gray, D.E.

    1995-12-31

    Limestone based wet flue gas desulfurization (FGD) has been the dominating control technology since the introduction of the clean air act and is projected to be the preferred FGD technology for the foreseeable future. Following the introduction of wet FGD systems in the late `60s, the technology quickly reached maturity with only incremental improvements during recent years. However, deregulation, emission trading, and market forces have demanded significant improvements in capital and operating costs, performance, environmental impact, ease of retrofit and cycle time. In response to market demands, ABB has developed a new generation wet FGD system, named LS-2, based on the traditional open spray tower technology. The development of the LS-2 system has progressed methodically within the ABB R&D community within the last three years and is currently being demonstrated at Ohio Edison`s Niles station.

  20. Tsunami Generation Modelling for Early Warning Systems

    NASA Astrophysics Data System (ADS)

    Annunziato, A.; Matias, L.; Ulutas, E.; Baptista, M. A.; Carrilho, F.

    2009-04-01

    In the frame of a collaboration between the European Commission Joint Research Centre and the Institute of Meteorology in Portugal, a complete analytical tool to support Early Warning Systems is being developed. The tool will be part of the Portuguese National Early Warning System and will be used also in the frame of the UNESCO North Atlantic Section of the Tsunami Early Warning System. The system called Tsunami Analysis Tool (TAT) includes a worldwide scenario database that has been pre-calculated using the SWAN-JRC code (Annunziato, 2007). This code uses a simplified fault generation mechanism and the hydraulic model is based on the SWAN code (Mader, 1988). In addition to the pre-defined scenario, a system of computers is always ready to start a new calculation whenever a new earthquake is detected by the seismic networks (such as USGS or EMSC) and is judged capable to generate a Tsunami. The calculation is performed using minimal parameters (epicentre and the magnitude of the earthquake): the programme calculates the rupture length and rupture width by using empirical relationship proposed by Ward (2002). The database calculations, as well the newly generated calculations with the current conditions are therefore available to TAT where the real online analysis is performed. The system allows to analyze also sea level measurements available worldwide in order to compare them and decide if a tsunami is really occurring or not. Although TAT, connected with the scenario database and the online calculation system, is at the moment the only software that can support the tsunami analysis on a global scale, we are convinced that the fault generation mechanism is too simplified to give a correct tsunami prediction. Furthermore short tsunami arrival times especially require a possible earthquake source parameters data on tectonic features of the faults like strike, dip, rake and slip in order to minimize real time uncertainty of rupture parameters. Indeed the earthquake

  1. System requirements for computerized scan report generation

    SciTech Connect

    Thompson, W.L.; De Puey, E.G.; Murphy, P.H.; Burdine, J.A.

    1984-01-01

    A patient report generation system on a small computer (IBM series/1) has been designed for a large nuclear medicine department. Requirements for much a system differ considerably from those of computers used for image processing. This system has eleven terminals and four printers located in both the main laboratory and a satellite cardiac stress laboratory 23 floors below. Patient records are independently accessed by clerical staff, technologists, and physicians for the addition of information. Individual programs for each organ link and display screens of selectable statements. Those preprogrammed selections together with free text are processed to form a personalized report in complete sentences. Software design minimizes delays in computer response due to increasing numbers of users. Printer spooling enables the physician to immediately proceed to the next patient report without waiting for the previous one to finish printing. Logical decisions are made by the software to print reports in appropriate locations, such as near the cardiac clinic in the case of cardiac studies. One can display the status of the day's schedule with incomplete studies highlighted, and generate a list of billing charges at the end of each day. Logistical problems of transmitting dictated reports to a central office, having them transcribed, proofread, retyped and distributed to key areas of the hospital are eliminated. The authors' experience over a two year period has indicated that ''static screen'' terminal hardware capability, high terminal speed, and printer spooling are essential, all of which are commonplace on small business computers.

  2. Method and system for radioisotope generation

    SciTech Connect

    Toth, James J.; Soderquist, Chuck Z.; Greenwood, Lawrence R.; Mattigod, Shas V.; Fryxell, Glen E.; O'Hara, Matthew J.

    2014-07-15

    A system and a process for producing selected isotopic daughter products from parent materials characterized by the steps of loading the parent material upon a sorbent having a functional group configured to selectively bind the parent material under designated conditions, generating the selected isotopic daughter products, and eluting said selected isotopic daughter products from the sorbent. In one embodiment, the process also includes the step of passing an eluent formed by the elution step through a second sorbent material that is configured to remove a preselected material from said eluent. In some applications a passage of the material through a third sorbent material after passage through the second sorbent material is also performed.

  3. Generating functions for canonical systems of fermions.

    PubMed

    Pain, Jean-Christophe; Gilleron, Franck; Porcherot, Quentin

    2011-06-01

    The method proposed by Pratt to derive recursion relations for systems of degenerate fermions [S. Pratt, Phys. Rev. Lett. 84, 4255 (2000)] relies on diagrammatic techniques. This efficient formalism assumes no explicit two-body interactions, makes possible the inclusion of conservation laws, and requires low computational time. In this Brief Report, we show that such recursion relations can be obtained from generating functions, without any restriction in relation to the number of conservation laws (e.g., total energy or angular momentum). PMID:21797523

  4. Optimization of Gear Ratio in the Tidal Current Generation System based on Generated Energy

    NASA Astrophysics Data System (ADS)

    Naoi, Kazuhisa; Shiono, Mitsuhiro; Suzuki, Katsuyuki

    It is possible to predict generating power of the tidal current generation, because of the tidal current's periodicity. Tidal current generation is more advantageous than other renewable energy sources, when the tidal current generation system is connected to the power system and operated. In this paper, we propose a method used to optimize the gear ratio and generator capacity, that is fundamental design items in the tidal current generation system which is composed of Darrieus type water turbine and squirrel-cage induction generator coupled with gear. The proposed method is applied to the tidal current generation system including the most large-sized turbine that we have developed and studied. This paper shows optimum gear ratio and generator capacity that make generated energy maximum, and verify effectiveness of the proposed method. The paper also proposes a method of selecting maximum generating current velocity in order to reduce the generator capacity, from the viewpoint of economics.

  5. New Generation Power System for Space Applications

    NASA Technical Reports Server (NTRS)

    Jones, Loren; Carr, Greg; Deligiannis, Frank; Lam, Barbara; Nelson, Ron; Pantaleon, Jose; Ruiz, Ian; Treicler, John; Wester, Gene; Sauers, Jim; Giampoli, Paul; Haskell, Russ; Mulvey, Jim; Repp, John

    2004-01-01

    The Deep Space Avionics (DSA) Project is developing a new generation of power system building blocks. Using application specific integrated circuits (ASICs) and power switching modules a scalable power system can be constructed for use on multiple deep space missions including future missions to Mars, comets, Jupiter and its moons. The key developments of the DSA power system effort are five power ASICs and a mod ule for power switching. These components enable a modular and scalab le design approach, which can result in a wide variety of power syste m architectures to meet diverse mission requirements and environments . Each component is radiation hardened to one megarad) total dose. The power switching module can be used for power distribution to regular spacecraft loads, to propulsion valves and actuation of pyrotechnic devices. The number of switching elements per load, pyrotechnic firin gs and valve drivers can be scaled depending on mission needs. Teleme try data is available from the switch module via an I2C data bus. The DSA power system components enable power management and distribution for a variety of power buses and power system architectures employing different types of energy storage and power sources. This paper will describe each power ASIC#s key performance characteristics as well a s recent prototype test results. The power switching module test results will be discussed and will demonstrate its versatility as a multip urpose switch. Finally, the combination of these components will illu strate some of the possible power system architectures achievable fro m small single string systems to large fully redundant systems.

  6. A System For Temporal Plan Generation

    NASA Astrophysics Data System (ADS)

    Tirumala, Bharadwaj S.; Hall, Lawrence O.

    1989-03-01

    Temporal reasoning, which is a way of pursuing goals and drawing inferences based on events occurring over time, plays an important role in automated planning systems and in general in common sense reasoning. This work is an attempt at exploring the problems involved in reasoning over time which typically involve updating a plan structure with changing world patterns. This involves developing the appropriate knowledge representation in addition to a plan generation system. A deductive retrieval mechanism, which has been tailored to the needs of temporal retrievals, has been imple-mented. Uncertainty due to incomplete information and indecision is resolved using fuzzy values and a dynamic resolution over a temporal data base. Imprecise temporal information is captured in fuzzy intervals. These intervals are made up of a beginning hour and ending hour. The system can find the tightest possible bounds on a possible event or step in a plan. The system user provides the constraint information for plan development. This is combined with basic domain information in the knowledge base. A plan or set of steps through some temporal constraints will be presented based upon the constraints and domain information. A fuzzy belief in the chance of the plans' success is associated with the information provided by the system.

  7. Integrated control of next generation power system

    SciTech Connect

    None, None

    2010-02-28

    The multi-agent system (MAS) approach has been applied with promising results for enhancing an electric power distribution circuit, such as the Circuit of the Future as developed by Southern California Edison. These next generation power system results include better ability to reconfigure the circuit as well as the increased capability to improve the protection and enhance the reliability of the circuit. There were four main tasks in this project. The specific results for each of these four tasks and their related topics are presented in main sections of this report. Also, there were seven deliverables for this project. The main conclusions for these deliverables are summarized in the identified subtask section of this report. The specific details for each of these deliverables are included in the “Project Deliverables” section at the end of this Final Report.

  8. Selective evolutionary generation systems: Theory and applications

    NASA Astrophysics Data System (ADS)

    Menezes, Amor A.

    This dissertation is devoted to the problem of behavior design, which is a generalization of the standard global optimization problem: instead of generating the optimizer, the generalization produces, on the space of candidate optimizers, a probability density function referred to as the behavior. The generalization depends on a parameter, the level of selectivity, such that as this parameter tends to infinity, the behavior becomes a delta function at the location of the global optimizer. The motivation for this generalization is that traditional off-line global optimization is non-resilient and non-opportunistic. That is, traditional global optimization is unresponsive to perturbations of the objective function. On-line optimization methods that are more resilient and opportunistic than their off-line counterparts typically consist of the computationally expensive sequential repetition of off-line techniques. A novel approach to inexpensive resilience and opportunism is to utilize the theory of Selective Evolutionary Generation Systems (SECS), which sequentially and probabilistically selects a candidate optimizer based on the ratio of the fitness values of two candidates and the level of selectivity. Using time-homogeneous, irreducible, ergodic Markov chains to model a sequence of local, and hence inexpensive, dynamic transitions, this dissertation proves that such transitions result in behavior that is called rational; such behavior is desirable because it can lead to both efficient search for an optimizer as well as resilient and opportunistic behavior. The dissertation also identifies system-theoretic properties of the proposed scheme, including equilibria, their stability and their optimality. Moreover, this dissertation demonstrates that the canonical genetic algorithm with fitness proportional selection and the (1+1) evolutionary strategy are particular cases of the scheme. Applications in three areas illustrate the versatility of the SECS theory: flight

  9. Tetragonal ZrO2:Nd3+ nanosphere: Combustion synthesis, luminescence and photoacoustic spectroscopy

    NASA Astrophysics Data System (ADS)

    Gupta, Santosh K.; Chandrasekhar, D.; Kadam, R. M.

    2015-12-01

    Nanocrystalline ZrO2:Nd3+ was synthesised using gel-combustion method and characterized systematically using X-ray diffraction (XRD) and transmission electron microscopy (TEM). Through this route we can stabilize metastable tetragonal phase at 500 °C through addition of 1 mol % Nd3+ which is technologically more important. Optical characterization of the sample was done using photoluminescence (PL) and photoacoustic spectroscopy (PAS). PL studies shows an intense and optimum stimulated emission cross section of 1065 nm peak corresponding to 4F3/2 → 4I11/2 which and thus it can be a probable laser material. PAS is used to investigate electronic absorption of Nd3 in zirconia. Various covalency parameters like nephelauxetic ratio (β), covalency factor (b1/2) and Sinha parameter (δ) were evaluated for pure oxide powder and as well as for Nd3+ doped zirconia.

  10. International symposium on peripheral nerve repair and regeneration and 2nd club Brunelli meeting

    PubMed Central

    2010-01-01

    The International Symposium "Peripheral Nerve Repair and Regeneration and 2nd Club Brunelli Meeting" was held on December 4-5, 2009 in Turin, Italy (Organizers: Bruno Battiston, Stefano Geuna, Isabelle Perroteau, Pierluigi Tos). Interest in the study of peripheral nerve regeneration is very much alive because complete recovery of nerve function almost never occurs after nerve reconstruction and, often, the clinical outcome is rather poor. Therefore, there is a need for defining innovative strategies for improving the success of recovery after nerve lesion and repair and this meeting was intended to discuss, from a multidisciplinary point of view, some of today's most important issues in this scientific field, arising from both basic and clinical neurosciences. PMID:20214775

  11. International symposium on peripheral nerve repair and regeneration and 2nd club Brunelli meeting.

    PubMed

    Turgut, Mehmet; Geuna, Stefano

    2010-01-01

    The International Symposium "Peripheral Nerve Repair and Regeneration and 2nd Club Brunelli Meeting" was held on December 4-5, 2009 in Turin, Italy (Organizers: Bruno Battiston, Stefano Geuna, Isabelle Perroteau, Pierluigi Tos). Interest in the study of peripheral nerve regeneration is very much alive because complete recovery of nerve function almost never occurs after nerve reconstruction and, often, the clinical outcome is rather poor. Therefore, there is a need for defining innovative strategies for improving the success of recovery after nerve lesion and repair and this meeting was intended to discuss, from a multidisciplinary point of view, some of today's most important issues in this scientific field, arising from both basic and clinical neurosciences. PMID:20214775

  12. A Perpendicular Biased 2nd Harmonic Cavity for the Fermilab Booster

    SciTech Connect

    Tan, C. Y.; Dey, J.; Madrak, R. L.; Pellico, W.; Romanov, G.; Sun, D.; Terechkine, I.

    2015-07-13

    A perpendicular biased 2nd harmonic cavity is currently being designed for the Fermilab Booster. Its purpose cavity is to flatten the bucket at injection and thus change the longitudinal beam distribution so that space charge effects are decreased. It can also with transition crossing. The reason for the choice of perpendicular biasing over parallel biasing is that the Q of the cavity is much higher and thus allows the accelerating voltage to be a factor of two higher than a similar parallel biased cavity. This cavity will also provide a higher accelerating voltage per meter than the present folded transmission line cavity. However, this type of cavity presents technical challenges that need to be addressed. The two major issues are cooling of the garnet material from the effects of the RF and the cavity itself from eddy current heating because of the 15 Hz bias field ramp. This paper will address the technical challenge of preventing the garnet from overheating.

  13. Glass fiber laser at 1. 36. mu. m from SiO sub 2 :Nd

    SciTech Connect

    Hakimi, F.; Po, H.; Tumminelli, R.; McCollum, B.C.; Zenteno, L.; Cho, N.M.; Snitzer, E. )

    1989-10-01

    By adding 14 mol % P{sub 2}O{sub 5} to the core of a SiO{sub 2}:Nd fiber, laser emission was obtained at 1.36 {mu}m. From the fluorescent spectra and laser thresholds for the {sup 4}{ital F}{sub 3/2} to {sup 4}{ital I}{sub 11/2} and {sup 4}{ital F}{sub 3/2} to {sup 4}{ital I}{sub 3/2} transitions, the net gain at 1.36 {mu}m is 0.024 dB/mW, and the ratio of excited-state absorption (the {sup 4}{ital F}{sub 3/2} to {sup 4}{ital G}{sub 1/2} transition) to stimulated emission is estimated to be 0.78.

  14. Preliminary GPS orbit combination results of the IGS 2nd reprocessing campaign

    NASA Astrophysics Data System (ADS)

    Choi, Kevin

    2015-04-01

    International GNSS Service (IGS) has contributed to the International Terrestrial Reference Frame by reprocessing historic GPS network data and submitting Terrestrial Reference Frame solutions and Earth Rotation Parameters. For the 2nd reprocessing campaign, Analysis Centers (ACs) used up to 21 years of GPS observation data with daily integrations. IERS2010 conventions are applied to model the physical effects of the Earth. Total eight ACs have participated (7 Global solutions, and 2 Tide Gauge solutions) by reprocessing entire time series in a consistent way using the latest models and methodology. IGS combined daily SINEX TRF and EOP combinations have already been submitted to the IERS for ITRF2013. This presentation mainly focuses on the preliminary quality assessment of the reprocessed AC orbits. Quality of the orbit products are examined by examining the repeatability between daily AC satellite ephemeris. Power spectral analysis shows the background noise characteristics of each AC products, and its periodic behaviors.

  15. [JAN JĘDRZEJEWICZ AND EUROPEAN ASTRONOMY OF THE 2ND HALF OF THE 19TH CENTURY].

    PubMed

    Siuda-Bochenek, Magda

    2015-01-01

    Jan Jędrzejewicz was an amateur astronomer who in the 2nd half of the 19th century created an observation centre, which considering the level of research was comparable to the European ones. Jędrzejewicz settled down in Plonsk in 1862 and worked as a doctor ever since but his greatest passion was astronomy, to which he dedicated all his free time. In 1875 Jędrzejewicz finished the construction of his observatory. He equipped it with basic astronomical and meteorological instruments, then began his observations and with time he became quite skilled in it. Jędrzejewicz focused mainly on binary stars but he also pointed his telescopes at the planets of the solar system, the comets, the Sun, as well as all the phenomena appearing in the sky at that time. Thanks to the variety of the objects observed and the number of observations he stood out from other observers in Poland and took a very good position in the mainstream of the 19th-century astronomy in Europe. Micrometer observations of binary stars made in Płońsk gained recognition in the West and were included in the catalogues of binary stars. Interest in Jędrzejewicz and his observatory was confirmed by numerous references in the English "Nature" magazine. PMID:26455002

  16. [Measurement report on the horizontal position relationship between the umbilicus and the 2nd lum- bar spinal process in adults].

    PubMed

    Zhao, Jingyi; Fu, Liyuan; Wang, Yueqi; Qiu, Wenqi; Yao, Miaojie; Zhao, Baixiao; Guo, Changqing

    2016-04-01

    The impact factors were explored to determine the horizontal positional relationship between the umbilicus and the 2nd lumbar spinal process in adults and to verify the accuracy of the localization of Shenshu (BL 23) via the umbilicus. The position of the umbilicus and the 2nd lumbar spinal process was measured in 100 participants and the data were analyzed through SPSS 20.0 software. It was found that the umbilicus and the 2nd lumbar process were not positioned horizontally. The positional relationship of these two sites was not apparently correlated with gender, age, body weight, body height, BMI, waistline and discomfort of lumbar region. The umbilicus was commonly and posteriorly projected on the site between the 4th and 5th lumbar vertebra. It is explained that the localization of Shenshu (BL23) via the umbilicus is not accurate. PMID:27352498

  17. Brain order disorder 2nd group report of f-EEG

    NASA Astrophysics Data System (ADS)

    Lalonde, Francois; Gogtay, Nitin; Giedd, Jay; Vydelingum, Nadarajen; Brown, David; Tran, Binh Q.; Hsu, Charles; Hsu, Ming-Kai; Cha, Jae; Jenkins, Jeffrey; Ma, Lien; Willey, Jefferson; Wu, Jerry; Oh, Kenneth; Landa, Joseph; Lin, C. T.; Jung, T. P.; Makeig, Scott; Morabito, Carlo Francesco; Moon, Qyu; Yamakawa, Takeshi; Lee, Soo-Young; Lee, Jong-Hwan; Szu, Harold H.; Kaur, Balvinder; Byrd, Kenneth; Dang, Karen; Krzywicki, Alan; Familoni, Babajide O.; Larson, Louis; Harkrider, Susan; Krapels, Keith A.; Dai, Liyi

    2014-05-01

    Since the Brain Order Disorder (BOD) group reported on a high density Electroencephalogram (EEG) to capture the neuronal information using EEG to wirelessly interface with a Smartphone [1,2], a larger BOD group has been assembled, including the Obama BRAIN program, CUA Brain Computer Interface Lab and the UCSD Swartz Computational Neuroscience Center. We can implement the pair-electrodes correlation functions in order to operate in a real time daily environment, which is of the computation complexity of O(N3) for N=102~3 known as functional f-EEG. The daily monitoring requires two areas of focus. Area #(1) to quantify the neuronal information flow under arbitrary daily stimuli-response sources. Approach to #1: (i) We have asserted that the sources contained in the EEG signals may be discovered by an unsupervised learning neural network called blind sources separation (BSS) of independent entropy components, based on the irreversible Boltzmann cellular thermodynamics(ΔS < 0), where the entropy is a degree of uniformity. What is the entropy? Loosely speaking, sand on the beach is more uniform at a higher entropy value than the rocks composing a mountain - the internal binding energy tells the paleontologists the existence of information. To a politician, landside voting results has only the winning information but more entropy, while a non-uniform voting distribution record has more information. For the human's effortless brain at constant temperature, we can solve the minimum of Helmholtz free energy (H = E - TS) by computing BSS, and then their pairwise-entropy source correlation function. (i) Although the entropy itself is not the information per se, but the concurrence of the entropy sources is the information flow as a functional-EEG, sketched in this 2nd BOD report. Area #(2) applying EEG bio-feedback will improve collective decision making (TBD). Approach to #2: We introduce a novel performance quality metrics, in terms of the throughput rate of faster (

  18. Generative engineering databases - Toward expert systems

    NASA Technical Reports Server (NTRS)

    Rasdorf, W. J.; Salley, G. C.

    1985-01-01

    Engineering data management, incorporating concepts of optimization with data representation, is receiving increasing attention as the amount and complexity of information necessary for performing engineering operations increases and the need to coordinate its representation and use increases. Research in this area promises advantages for a wide variety of engineering applications, particularly those which seek to use data in innovative ways in the engineering process. This paper presents a framework for a comprehensive, relational database management system that combines a knowledge base of design constraints with a database of engineering data items in order to achieve a 'generative database' - one which automatically generates new engineering design data according to the design constraints stored in the knowledge base. The representation requires a database that is able to store all of the data normally associated with engineering design and to accurately represent the interactions between constraints and the stored data while guaranteeing its integrity. The representation also requires a knowledge base that is able to store all the constraints imposed upon the engineering design process.

  19. The Meteosat Second Generation (MSG) power system

    SciTech Connect

    Haines, J.E.; Levins, D.; Robben, A.; Sepers, A.

    1997-12-31

    Under the direction of the European Meteorological Satellite Organization (EUMETSAT) and the European Space Agency (ESA), space industries within Europe are in the process of developing a new series of larger and more performant geostationary weather satellites. The initial three spacecraft within this new series, which are known by the name of Meteosat Second Generation (MSG), are due to be progressively launched from the year 2000 onwards. The major objective of this mission is the continuation of the European weather watch and space borne atmospheric sensing services provided by the present series of Meteosat spacecraft. To satisfy this mission requirement, the payload compliment to be supported by MSG will consist of a comprehensive earth viewing instrument capable of operating in both the infra-red and visible spectrum, an earth radiation measurement system and a search and rescue facility. In furnishing the power needs for these payloads, the power generating element on the spin stabilized MSG spacecraft consists of a body mounted solar array, capable of providing 628 watts of electrical power at the end of seven years of geosynchronous orbital lifetime. The energy storage elements for the spacecraft consists of two, 29 ampere-hour batteries, while centralized power management is achieved by the Power Control Unit (PCU), which satisfies the payload and battery re-charge demands by controlling the available solar array power. Power distribution for the spacecraft electrical loads and heaters is achieved by the Power Distribution Unit (PDU) and for the pyrotechnic devices by the Pyrotechnic Release Unit.

  20. System for generating timing and control signals

    NASA Technical Reports Server (NTRS)

    Perlman, M.; Rousey, W. J.; Messner, A. (Inventor)

    1975-01-01

    A system capable of generating every possible data frame subperiod and delayed subperiod of a data frame of length of M clock pulse intervals (CPIs) comprised of parallel modulo-m sub i counters is presented. Each m sub i is a prime power divisor of M and a cascade of alpha sub i identical modulo-p sub i counters. The modulo-p sub i counters are feedback shift registers which cycle through p sub i distinct states. Every possible nontrivial data frame subperiod and delayed subperiod is derived and a specific CPI in the data frame is detected. The number of clock pulses required to bring every modulo-p sub i counter to a respective designated state or count is determined by the Chinese remainder theorem. This corresponds to the solution of simultaneous congruences over relatively prime moduli.

  1. Spray generators for absorption refrigeration systems

    DOEpatents

    Sibley, Howard W.

    1979-06-19

    A spray generator for an absorption refrigeration system that includes a heat exchanger comprised of a multiplicity of variably spaced heat exchange tubes. The tubes are spaced close together near the top of the heat exchanger and spaced more widely apart near the bottom of the heat exchanger. Dilute absorbent solution is sprayed down through the heat exchanger. The close nesting of the tubes in the top portion of the heat exchanger retards liquid flow and aids heating of the solution. The wide spacing of the tubes in the lower section of the heat exchanger facilitate vapor flow out of the heat exchanger and eliminates liquid "blow-off". The top tubes are covered by a baffle to prevent the liquid solution from splashing out of the heat exchanger off of these top tubes.

  2. FOREWORD: 2nd International Workshop on New Computational Methods for Inverse Problems (NCMIP 2012)

    NASA Astrophysics Data System (ADS)

    Blanc-Féraud, Laure; Joubert, Pierre-Yves

    2012-09-01

    Conference logo This volume of Journal of Physics: Conference Series is dedicated to the scientific contributions presented during the 2nd International Workshop on New Computational Methods for Inverse Problems, (NCMIP 2012). This workshop took place at Ecole Normale Supérieure de Cachan, in Cachan, France, on 15 May 2012, at the initiative of Institut Farman. The first edition of NCMIP also took place in Cachan, France, within the scope of the ValueTools Conference, in May 2011 (http://www.ncmip.org/2011/). The NCMIP Workshop focused on recent advances in the resolution of inverse problems. Indeed inverse problems appear in numerous scientific areas such as geophysics, biological and medical imaging, material and structure characterization, electrical, mechanical and civil engineering, and finance. The resolution of inverse problems consists of estimating the parameters of the observed system or structure from data collected by an instrumental sensing or imaging device. Its success firstly requires the collection of relevant observation data. It also requires accurate models describing the physical interactions between the instrumental device and the observed system, as well as the intrinsic properties of the solution itself. Finally, it requires the design of robust, accurate and efficient inversion algorithms. Advanced sensor arrays and imaging devices provide high rate and high volume data; in this context, the efficient resolution of the inverse problem requires the joint development of new models and inversion methods, taking computational and implementation aspects into account. During this one-day workshop, researchers had the opportunity to bring to light and share new techniques and results in the field of inverse problems. The topics of the workshop were: algorithms and computational aspects of inversion, Bayesian estimation, kernel methods, learning methods, convex optimization, free discontinuity problems, metamodels, proper orthogonal decomposition

  3. GENNY: A Knowledge-Based Text Generation System.

    ERIC Educational Resources Information Center

    Maybury, Mark T.

    1989-01-01

    Describes a computational model of the human process of generating text. The system design and generation process are discussed with particular attention to domain independence and cross language portability. The results of system tests are presented, the generator is evaluated with respect to current generators, and future directions are…

  4. Next generation: In-space transportation system(s)

    NASA Technical Reports Server (NTRS)

    Huffaker, Fredrick; Redus, Jerry; Kelley, David L.

    1991-01-01

    The development of the next generation In-Space Transportation System presents a unique challenge to the design of a propulsion system for the Space Exploration Initiative (SEI). Never before have the requirements for long-life, multiple mission use, space basing, high reliability, man-rating, and minimum maintenance come together with performance in one system that must protect the lives of space travelers, support the mission logistics needs, and do so at an acceptable cost. The challenge that is presented is to quantify the bounds of these requirements. The issue is one of degree. The length of acceptable life in space, the time it takes for reuse to pay off, and the degree to which space basing is practical (full, partial, or expended) are the issues that determine the reusable bounds of a design and include dependability, contingency capabilities, resilency, and minimum dependence on a maintenance node in preparation for and during a mission. Missions to planet earth, other non-NASA missions, and planetary missions will provide important but less demanding requirements for the transportation systems of the future. The mission proposed for the SEI require a family of transportation vehicles to meet the requirements for establishing a permanent human presence on the Moon and eventually on Mars. Specialized vehicles are needed to accomplish the different phases of each mission. These large scale missions require assembly in space and will provide the greatest usage of the planned integrated transportation system. The current approach to defining the In-Space Transportation System for the SEI Moon missions with later Mars mission applications is presented. Several system development options, propulsion concepts, current/proposed activities are reviewed, and key propulsion design criteria, issues, and technology challenges for the next generation In-Space Transportation System(s) are outlined.

  5. Environmental Control and Life Support System, Oxygen Generation System

    NASA Technical Reports Server (NTRS)

    2000-01-01

    The Environmental Control and Life Support System (ECLSS) Group of the Flight Projects Directorate at the Marshall Space Flight Center (MSFC) in Huntsville, Alabama, is responsible for designing and building the life support systems that will provide the crew of the International Space Station (ISS) a comfortable environment in which to live and work. This is a close-up view of ECLSS Oxygen Generation System (OGS) rack. The ECLSS Group at the MSFC oversees the development of the OGS, which produces oxygen for breathing air for the crew and laboratory animals, as well as for replacing oxygen lost due to experiment use, airlock depressurization, module leakage, and carbon dioxide venting. The OGS consists primarily of the Oxygen Generator Assembly (OGA), provided by the prime contractor, the Hamilton Sundstrand Space Systems, International (HSSSI) in Windsor Locks, Cornecticut and a Power Supply Module (PSM), supplied by the MSFC. The OGA is comprised of a cell stack that electrolyzes (breaks apart the hydrogen and oxygen molecules) some of the clean water provided by the Water Recovery System and the separators that remove the gases from water after electrolysis. The PSM provides the high power to the OGA needed to electrolyze the water.

  6. Application of field-modulated generator systems to dispersed solar thermal electric generation

    NASA Technical Reports Server (NTRS)

    Ramakumar, R.

    1979-01-01

    The state-of-the-art of field modulated generation system (FMGS) is presented, and the application of FMGS to dispersed solar thermal electric generation is discussed. The control and monitoring requirements for solar generation system are defined. A comparison is presented between the FMGS approach and other options and the technological development needs are discussed.

  7. The Hyphen as a Syllabification Cue in Reading Bisyllabic and Multisyllabic Words among Finnish 1st and 2nd Graders

    ERIC Educational Resources Information Center

    Häikiö, Tuomo; Bertram, Raymond; Hyönä, Jukka

    2016-01-01

    Finnish ABC books present words with hyphens inserted at syllable boundaries. Syllabification by hyphens is abandoned in the 2nd grade for bisyllabic words, but continues for words with three or more syllables. The current eye movement study investigated how and to what extent syllable hyphens in bisyllabic ("kah-vi" "cof-fee")…

  8. Give It a Shot! Toolkit for Nurses and Other Immunization Champions Working with Secondary Schools. 2nd Edition

    ERIC Educational Resources Information Center

    Boyer-Chu, Lynda; Wooley, Susan F.

    2008-01-01

    Adolescent immunization saves lives--but promoting immunization takes time and thought, and today's nurses and other health advocates are faced with a host of ever-expanding responsibilities in a time of reduced budgets and staff. This toolkit is thus structured as an easy and reliable resource. This 2nd edition contains: (1) a 64-page manual;…

  9. Conference Proceedings: 2nd European Conference of Rehabilitation International; Disability in the Family. (Brighton, England, September 18-21, 1978)

    ERIC Educational Resources Information Center

    Royal Association for Disability and Rehabilitation, London (England).

    The conference proceedings of the 2nd European Conference of Rehabilitation International (1978) on the theme disability in the family contains the agenda and approximately 80 papers. National presentations consider the theme in papers by representatives of Finland, Hungary, Belgium, The Netherlands, Portugal, Hong Kong, India, The German…

  10. The Influence of Neighborhood Density and Word Frequency on Phoneme Awareness in 2nd and 4th Grades

    ERIC Educational Resources Information Center

    Hogan, Tiffany P.; Bowles, Ryan P.; Catts, Hugh W.; Storkel, Holly L.

    2011-01-01

    Purpose: The purpose of this study was to test the hypothesis that two lexical characteristics--neighborhood density and word frequency--interact to influence performance on phoneme awareness tasks. Methods: Phoneme awareness was examined in a large, longitudinal dataset of 2nd and 4th grade children. Using linear logistic test model, the relation…

  11. Observation in a School without Walls: Peer Observation of Teaching in a 2nd-12th Grade Independent School

    ERIC Educational Resources Information Center

    Salvador, Josephine

    2012-01-01

    What happens when teachers start to observe each other's classes? How do teachers make meaning of observing and being observed? What effects, if any, does requiring peer observation have on the teaching community? This research explores these questions in a qualitative study of peer observation of teaching (POT) in the 2nd-12th grades of an…

  12. Iron metabolism in African American women during the 2nd and 3rd trimester of a high-risk pregnancy

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Objective: To examine iron metabolism during the 2nd and 3rd trimester in African American women classified as a high-risk pregnancy. Design: Longitudinal. Setting: Large, university-based, urban Midwestern medical center. Participants: Convenience sample of 47 African American women classified a...

  13. Chemically generated convective transport in microfluidic system

    NASA Astrophysics Data System (ADS)

    Shklyaev, Oleg; Das, Sambeeta; Altemose, Alicia; Shum, Henry; Balazs, Anna; Sen, Ayusman

    High precision manipulation of small volumes of fluid, containing suspended micron sized objects like cells, viruses, and large molecules, is one of the main goals in designing modern lab-on-a-chip devices which can find a variety of chemical and biological applications. To transport the cargo toward sensing elements, typical microfluidic devices often use pressure driven flows. Here, we propose to use enzymatic chemical reactions which decompose reagent into less dense products and generate flows that can transport particles. Density variations that lead to flow in the assigned direction are created between the place where reagent is fed into the solution and the location where it is decomposed by enzymes attached to the surface of the microchannel. When the reagent is depleted, the fluid motion stops and particles sediment to the bottom. We demonstrate how the choice of chemicals, leading to specific reaction rates, can affect the transport properties. In particular, we show that the intensity of the fluid flow, the final location of cargo, and the time for cargo delivery are controlled by the amount and type of reagent in the system.

  14. NEXT GENERATION GAS TURBINE (NGGT) SYSTEMS STUDY

    SciTech Connect

    Unknown

    2001-12-05

    , both in terms of incorporation of technology into current products, as well as to an NGGT product. In summary, potential program costs are shown for development of the candidate systems along with the importance of future DOE enabling participation. Three main conclusions have been established via this study: (1) Rapid recent changes within the power generation regulatory environment and the resulting ''bubble'' of gas turbine orders has altered the timing and relative significance associated with the conclusions of the ADL study upon which the original DOE NGGT solicitation was based. (2) Assuming that the relevant technologies were developed and available for an NGGT market opportunity circa 2010, the top candidate system that meets or exceeds the DOE PRDA requirements was determined to be a hybrid aero-derivative/heavy duty concept. (3) An investment by DOE of approximately $23MM/year to develop NGGT technologies near/mid term for validation and migration into a reasonable fraction of the installed base of GE F-class products could be leveraged into $1.2B Public Benefit, with greatest benefits resulting from RAM improvements. In addition to the monetary Public Benefit, there is also significant benefit in terms of reduced energy consumption, and reduced power plant land usage.

  15. Minimal Clinically Important Difference on Parkinson's Disease Sleep Scale 2nd Version

    PubMed Central

    Horváth, Krisztina; Aschermann, Zsuzsanna; Ács, Péter; Deli, Gabriella; Janszky, József; Komoly, Sámuel; Karádi, Kázmér; Kovács, Márton; Makkos, Attila; Faludi, Béla; Kovács, Norbert

    2015-01-01

    Background and Aims. The aim of the present study was to determine the estimates of minimal clinically important difference for Parkinson's Disease Sleep Scale 2nd version (PDSS-2) total score and dimensions. Methods. The subject population consisted of 413 PD patients. At baseline, MDS-UPDRS, Hoehn-Yahr Scale, Mattis Dementia Rating Scale, and PDSS-2 were assessed. Nine months later the PDSS-2 was reevaluated with the Patient-Reported Global Impression Improvement Scale. Both anchor-based techniques (within patients' score change method and sensitivity- and specificity-based method by receiver operating characteristic analysis) and distribution-based approaches (effect size calculations) were utilized to determine the magnitude of minimal clinically important difference. Results. According to our results, any improvements larger than −3.44 points or worsening larger than 2.07 points can represent clinically important changes for the patients. These thresholds have the effect size of 0.21 and −0.21, respectively. Conclusions. Minimal clinically important differences are the smallest change of scores that are subjectively meaningful to patients. Studies using the PDSS-2 as outcome measure should utilize the threshold of −3.44 points for detecting improvement or the threshold of 2.07 points for observing worsening. PMID:26539303

  16. Efficient Simulation of Wing Modal Response: Application of 2nd Order Shape Sensitivities and Neural Networks

    NASA Technical Reports Server (NTRS)

    Kapania, Rakesh K.; Liu, Youhua

    2000-01-01

    At the preliminary design stage of a wing structure, an efficient simulation, one needing little computation but yielding adequately accurate results for various response quantities, is essential in the search of optimal design in a vast design space. In the present paper, methods of using sensitivities up to 2nd order, and direct application of neural networks are explored. The example problem is how to decide the natural frequencies of a wing given the shape variables of the structure. It is shown that when sensitivities cannot be obtained analytically, the finite difference approach is usually more reliable than a semi-analytical approach provided an appropriate step size is used. The use of second order sensitivities is proved of being able to yield much better results than the case where only the first order sensitivities are used. When neural networks are trained to relate the wing natural frequencies to the shape variables, a negligible computation effort is needed to accurately determine the natural frequencies of a new design.

  17. Introduction of the 2nd Phase of the Integrated Hydrologic Model Intercomparison Project

    NASA Astrophysics Data System (ADS)

    Kollet, Stefan; Maxwell, Reed; Dages, Cecile; Mouche, Emmanuel; Mugler, Claude; Paniconi, Claudio; Park, Young-Jin; Putti, Mario; Shen, Chaopeng; Stisen, Simon; Sudicky, Edward; Sulis, Mauro; Ji, Xinye

    2015-04-01

    The 2nd Phase of the Integrated Hydrologic Model Intercomparison Project commenced in June 2013 with a workshop at Bonn University funded by the German Science Foundation and US National Science Foundation. Three test cases were defined and compared that are available online at www.hpsc-terrsys.de including a tilted v-catchment case; a case called superslab based on multiple slab-heterogeneities in the hydraulic conductivity along a hillslope; and the Borden site case, based on a published field experiment. The goal of this phase is to further interrogate the coupling of surface-subsurface flow implemented in various integrated hydrologic models; and to understand and quantify the impact of differences in the conceptual and technical implementations on the simulation results, which may constitute an additional source of uncertainty. The focus has been broadened considerably including e.g. saturated and unsaturated subsurface storages, saturated surface area, ponded surface storage in addition to discharge, and pressure/saturation profiles and cross-sections. Here, first results are presented and discussed demonstrating the conceptual and technical challenges in implementing essentially the same governing equations describing highly non-linear moisture redistribution processes and surface-groundwater interactions.

  18. Development of a generator stator insulation system

    NASA Astrophysics Data System (ADS)

    Buritz, R. S.

    1983-04-01

    The insulation of stator windings in generators is an old technology, dating to the turn of the century with kraft paper insulated, oil filled cables. Recently, two new classes of machines requiring much more advanced techniques of insulation have emerged. These generators are designed for relatively short duty in situations where light weight and small size are crucial to the overall mission, and mobility is a must. One class of machines uses superconducting windings to achieve small size. The other class consists of conventional generators designed to have extremely high power densities and specific powers. These machines represent a considerable engineering achievement, being significantly smaller than any previous generator. In one of these generators, manufactured by Bendix, substantial problems have been encountered in the stator winding insulation, because of the high fields dictated by the extremely high power density. This report presents the Hughes Aircraft Company approach and solution to these problems.

  19. G-EVER Activities and the Next-generation Volcanic Hazard Assessment System

    NASA Astrophysics Data System (ADS)

    Takarada, S.

    2013-12-01

    The Asia-Pacific Region Global Earthquake and Volcanic Eruption Risk Management (G-EVER) is a consortium of Asia-Pacific geohazard research institutes that was established in 2012. G-EVER aims to formulate strategies to reduce the risks of disasters worldwide caused by the occurrence of earthquakes, tsunamis and volcanic eruptions. G-EVER is working on enhancing collaboration, sharing of resources, and making information on the risks of earthquakes and volcanic eruptions freely available and understandable. The 1st G-EVER International Symposium was held in Tsukuba, Japan in March 11, 2013. The 2nd Symposium is scheduled in Sendai, Tohoku Japan, in Oct. 19-20, 2013. Currently, 4 working groups were proposed in the G-EVER Consortium. The next-generation volcano hazard assessment WG is developing a useful system for volcanic eruption prediction, risk assessment, and evacuation at various eruption stages. The assessment system is based on volcanic eruption history datasets, volcanic eruption database, and numerical simulations. Volcanic eruption histories including precursor phenomena leading to major eruptions of active volcanoes are very important for future prediction of volcanic eruptions. A high quality volcanic eruption database, which contains compilations of eruption dates, volumes, and types, is important for the next-generation volcano hazard assessment system. Proposing international standards on how to estimate the volume of volcanic products is important to make a high quality volcanic eruption database. Spatial distribution database of volcanic products (e.g. tephra and pyroclastic flow distributions), encoded into a GIS based database is necessary for more precise area and volume estimation and risk assessments. The volcanic eruption database is developed based on past eruption results, which only represents a subset of possible future scenarios. Therefore, numerical simulations with controlled parameters are needed for more precise volcanic eruption

  20. Electrocradiographic Qrs Axis, Q Wave and T-wave Changes in 2nd and 3rd Trimester of Normal Pregnancy

    PubMed Central

    S., Chandrasekharappa; Brid, S.V

    2014-01-01

    Background: Pregnancy although a physiological phenomena affects all the functions of the maternal body and brings about remarkable changes in the cardiovascular system. The cardiovascular changes and many of the physiological adaptations of normal pregnancy alter the physical findings thus, sometimes misleading the diagnosis of heart disease. Pregnancy also brings about various changes in the electrocardiogram, further confusing with that of heart disease. This study is undertaken to highlight the effect of normal pregnancy on the QRS axis, Q wave and T-wave of the Electrocardiogram and thereby helps us to distinguish it from that of pathological changes. Objectives: To study the effect of normal pregnancy on the QRS axis, Q wave and T-wave in the electrocardiogram and to compare with that of normal non pregnant women. Materials and Methods: Fifty normal pregnant women in 2nd and 3rd trimester each between 20– 35 y of age and 50 normal non pregnant women of the same age group were selected for the study. A 12 lead ECG was recorded by using ECG machine with special emphasis on QRS axis, Q wave and T-wave changes and all the parameters were analysed. Results: The ECG changes observed in our study include, deviation of QRS axis towards left as pregnancy advanced, significant increased incidence of occurrence of prominent Q waves in lead II, III and avF in pregnant group (p < 0.05 ) and, T-wave abnormalities like flat and inverted T-waves in lead III, V1 – V3 were more frequent in pregnant group ( p<0.05 ) than in non pregnant group. Conclusion:Normal pregnancy brings about various changes in ECG. These changes during pregnancy should be interpretated with caution by the physicians. It is necessary to understand the normal physiological changes which in turn help us in better management of those with cardiac disease. PMID:25386425

  1. 2nd International Joint Topical Meeting on Emergency Preparedness and Response and Robotic and Remote Systems

    SciTech Connect

    Lu, Po-Yung; Thomas, Richard D.; Wassom, John S.

    2008-01-01

    It is desirable for the Department of Energy/National Nuclear Security Administration emergency preparedness and response community to have available every resource to enhance its capabilities for assessing the health effects of environmental agents. Such resources will aid DOE/NNSA in achieving its goal of protecting the health and safety of workers, the public, and environment in event of the release of radiological, chemical, or biological agents into the environment. Studies are reported in this paper where composite data analyses were done for the chemicals included in DOE's Protective Action Criteria (PACs) database. PACs define the concentration of airborne chemicals at which protective actions are required. They are used by DOE/NNSA in developing Emergency Preparedness Procedures and for Operational Emergencies. Data analyses were conducted to discern structure-activity relationship patterns among PAC chemicals by assigned classification schemes based on the 30 accepted categories used by the EPA Gene-Tox Program. PAC chemicals were scored according to their frequency of distribution, severity of toxicity index, and structural classification. These studies yielded results that could be helpful in assessing the toxicity of new chemicals. It is suggested that provisions be made to include chemical structural information in the PAC database.

  2. 2nd stage lint cleaning system total particulate emission factors and rates for cotton gins

    Technology Transfer Automated Retrieval System (TEKTRAN)

    This manuscript is part of a series of manuscripts that characterize cotton gin emissions from the standpoint of stack sampling. The impetus behind this project was the urgent need to collect additional cotton gin emissions data to address current regulatory issues. A key component of this study was...

  3. Analysis methods for solar heating and cooling applications: passive and active systems. 2nd edition

    SciTech Connect

    1980-01-01

    Brief descriptions of analysis methods and design tools which are valuable in performing parametric studies of candidate designs are presented in this brochure. The methods included range from rules-of-thumb for builders to the simulation packages used by researchers. (MHR)

  4. 2nd stage mote system PM2.5 emission factors and rates for cotton gins

    Technology Transfer Automated Retrieval System (TEKTRAN)

    This manuscript is part of a series of manuscripts that detail a project to characterize cotton gin emissions from the standpoint of stack and ambient sampling. The impetus behind the project was the 2006 EPA implementation of a more stringent standard for particulate matter less than or equal to 2....

  5. Project DEEP STEAM 2nd and 3rd quarter reports, April 1-September 30, 1981

    SciTech Connect

    Moreno, J.B.; Aeschliman, D.P.; Clay, R.G.; Lee, D.O.; Marshall, B.W.; Muir, J.F.

    1982-03-01

    The objective of Project DEEP STEAM is to develop the technology required to economically produce heavy oil from deep reservoirs. The tasks included in this project are development of thermally efficient delivery systems and downhole steam-generation systems. During the period April 1-September 30, 1981, activity was completed on the development of a low-pressure-combustion, indirect-contact downhole generator (Rocketdyne), and effort continued on two high-pressure, direct-contact designs (Foster-Miller Associates, Sandia National Laboratories). Field testing of the Sandia design began in the Wilmington Field at Long Beach, California. This was the first test of a high-pressure, direct-contact downhole steam generator in a deep well. Development of a second Sandia design, using pure oxygen as the oxidizer, was initiated. Progress continued on the Min-Stress II packer concept at L'Garde, Inc., and on the extruded metal packer at Foster-Miller. A new insulant test series was begun at the Tacoma test tower. The instrumented bare-string steam injection test in Canada, initiated in cooperation with Husky Oil in the last report period, was successfully completed in early May. A redesigned test program to allow simultaneous testing of several different insulated tubulars is scheduled for October 1981.

  6. Electrical power systems for distributed generation

    SciTech Connect

    Robertson, T.A.; Huval, S.J.

    1996-12-31

    {open_quotes}Distributed Generation{close_quotes} has become the {open_quotes}buzz{close_quotes} word of an electric utility industry facing deregulation. Many industrial facilities utilize equipment in distributed installations to serve the needs of a thermal host through the capture of exhaust energy in a heat recovery steam generator. The electrical power generated is then sold as a {open_quotes}side benefit{close_quotes} to the cost-effective supply of high quality thermal energy. Distributed generation is desirable for many different reasons, each with unique characteristics of the product. Many years of experience in the distributed generation market has helped Stewart & Stevenson to define a range of product features that are crucial to most any application. The following paper will highlight a few of these applications. The paper will also examine the range of products currently available and in development. Finally, we will survey the additional services offered by Stewart & Stevenson to meet the needs of a rapidly changing power generation industry.

  7. The Influence of Instructional Climates on Time Spent in Management Tasks and Physical Activity of 2nd-Grade Students during Physical Education

    ERIC Educational Resources Information Center

    Logan, Samuel W.; Robinson, Leah E.; Webster, E. Kipling; Rudisill, Mary E.

    2015-01-01

    The purpose of this study is to determine the effect of two physical education (PE) instructional climates (mastery, performance) on the percentage of time students spent in a) moderate-to-vigorous physical activity (MVPA) and b) management tasks during PE in 2nd-grade students. Forty-eight 2nd graders (mastery, n = 23; performance, n = 25)…

  8. Madeira Extreme Floods: 2009/2010 Winter. Case study - 2nd and 20th of February

    NASA Astrophysics Data System (ADS)

    Pires, V.; Marques, J.; Silva, A.

    2010-09-01

    Floods are at world scale the natural disaster that affects a larger fraction of the population. It is a phenomenon that extends it's effects to the surrounding areas of the hydrographic network (basins, rivers, dams) and the coast line. Accordingly to USA FEMA (Federal Emergency Management Agency) flood can be defined as:"A general and temporary condition of partial or complete inundation of two or more acres of normally dry land area or of two or more properties from: Overflow of inland or tidal waters; Unusual and rapid accumulation or runoff of surface waters from any source; Mudflow; Collapse or subsidence of land along the shore of a lake or similar body of water as a result of erosion or undermining caused by waves or currents of water exceeding anticipated cyclical levels that result in a flood as defined above." A flash flood is the result of intense and long duration of continuous precipitation and can result in dead casualties (i.e. floods in mainland Portugal in 1967, 1983 and 1997). The speed and strength of the floods either localized or over large areas, results in enormous social impacts either by the loss of human lives and or the devastating damage to the landscape and human infrastructures. The winter of 2009/2010 in Madeira Island was characterized by several episodes of very intense precipitation (specially in December 2009 and February 2010) adding to a new record of accumulated precipitation since there are records in the island. In February two days are especially rainy with absolute records for the month of February (daily records since 1949): 111mm and 97mm on the 2nd and 20th respectively. The accumulated precipitation ended up with the terrible floods on the 20th of February causing the lost of dozens of human lives and hundreds of millions of Euros of losses The large precipitation occurrences either more intense precipitation in a short period or less intense precipitation during a larger period are sometimes the precursor of

  9. The Ratio of 2nd to 4th Digit Length in Korean Alcohol-dependent Patients

    PubMed Central

    Han, Changwoo; Bae, Hwallip; Lee, Yu-Sang; Won, Sung-Doo; Kim, Dai Jin

    2016-01-01

    Objective The ratio of 2nd to 4th digit length (2D:4D) is a sexually dimorphic trait. Men have a relatively shorter second digit than fourth digit. This ratio is thought to be influenced by higher prenatal testosterone level or greater sensitivity to androgen. The purpose of this study is to investigate the relationship between alcohol dependence and 2D:4D in a Korean sample and whether 2D:4D can be a biologic marker in alcohol dependence. Methods In this study, we recruited 87 male patients with alcohol dependence from the alcohol center of one psychiatric hospital and 52 healthy male volunteers who were all employees in the same hospital as controls. We captured images of the right and left hands of patients and controls using a scanner and extracted data with a graphics program. We measured the 2D:4D of each hand and compared the alcohol dependence group with the control group. We analyzed these ratios using an independent-samples t-test. Results The mean 2D:4D of patients was 0.934 (right hand) and 0.942 (left hand), while the mean 2D:4D of controls was 0.956 (right hand) and 0.958 (left hand). Values for both hands were significantly lower for patients than controls (p<0.001, right hand; p=0.004, left hand). Conclusion Patients who are alcohol dependent have a significantly lower 2D:4D than controls, similar to the results of previous studies, which suggest that a higher prenatal testosterone level in the gonadal period is related to alcoholism. Furthermore, 2D:4D is a possible predictive marker of alcohol dependence. PMID:27121425

  10. A convective divertor utilizing a 2nd-order magnetic field null

    NASA Astrophysics Data System (ADS)

    Rognlien, Thomas

    2014-10-01

    New results motivate a detailed study of a magnetic divertor concept characterized by strong plasma convection near a poloidal magnetic field (Bp) null region. The configuration is that of a near-2nd-order Bp null (Bp ~ Δ r2) , as in a snowflake divertor. The concept has 2 key features: (A) Convection spreads the heat flux between multiple divertor legs and further broadens the heat-flux profile within each leg, thereby greatly reducing target-plate heat loads. (B) The heat flux is further reduced by line radiation in each leg in detachment-like ionization zones. Theory indicates that convective turbulence arises when the poloidal plasma beta, βp = 2μ0nT/B p 2 >> 1 . Measurements in TCV now more fully quantify earlier NSTX and TCV observations of plasma mixing, and related modeling of TCV indicates that strongly enhanced null-region transport is present. Convective mixing provides a stabilizing mechanism to prevent the ionization fronts (hydrogenic and impurity) from collapsing to a highly radiating core MARFE. Also, the radiating zone maps to a very small region at the midplane owing to the very weak Bp in the convective region, thus minimizing its impact on the core plasma. Detailed calculations are reported that combine features A and B noted above. The plasma mixing mechanisms are described together with the corresponding transport model implemented in the 2D UEDGE edge transport code. UEDGE calculations are presented that quantify the roles of mixing, impurity radiation, and detachment stability for a realistic snowflake configuration. Work in collaboration with D.D. Ryutov, S.I. Krasheninnikov, and M.V. Umansky. Performed for the U.S. DoE by LLNS, LLC, LLNL, under Contract DE-AC52-07NA27344.

  11. PREFACE: 2nd International Conference on Competitive Materials and Technological Processes (IC-CMTP2)

    NASA Astrophysics Data System (ADS)

    László, Gömze A.

    2013-12-01

    Competitiveness is one of the most important factors in our life and it plays a key role in the efficiency both of organizations and societies. The more scientifically supported and prepared organizations develop more competitive materials with better physical, chemical and biological properties and the leading companies apply more competitive equipment and technology processes. The aims of the 2nd International Conference on Competitive Materials and Technology Processes (ic-cmtp2) are the following: Promote new methods and results of scientific research in the fields of material, biological, environmental and technology sciences; Change information between the theoretical and applied sciences as well as technical and technological implantations. Promote the communication between the scientist of different nations, countries and continents. Among the major fields of interest are materials with extreme physical, chemical, biological, medical, thermal, mechanical properties and dynamic strength; including their crystalline and nano-structures, phase transformations as well as methods of their technological processes, tests and measurements. Multidisciplinary applications of materials science and technological problems encountered in sectors like ceramics, glasses, thin films, aerospace, automotive and marine industry, electronics, energy, construction materials, medicine, biosciences and environmental sciences are of particular interest. In accordance to the program of the conference ic-cmtp2, more than 250 inquiries and registrations from different organizations were received. Researchers from 36 countries in Asia, Europe, Africa, North and South America arrived at the venue of conference. Including co-authors, the research work of more than 500 scientists are presented in this volume. Professor Dr Gömze A László Chair, ic-cmtp2 The PDF also contains lists of the boards, session chairs and sponsors.

  12. Onboard Inert Gas Generation System/Onboard Oxygen Gas Generation System (OBIGGS/OBOGS) Study. Part 1; Aircraft System Requirements

    NASA Technical Reports Server (NTRS)

    Reynolds, Thomas L.; Bailey, Delbert B.; Lewinski, Daniel F.; Roseburg, Conrad M.; Palaszewski, Bryan (Technical Monitor)

    2001-01-01

    The purpose of this technology assessment is to define a multiphase research study program investigating Onboard Inert Gas Generation Systems (OBIGGS) and Onboard Oxygen Generation Systems (OBOGS) that would identify current airplane systems design and certification requirements (Subtask 1); explore state-of-the-art technology (Subtask 2); develop systems specifications (Subtask 3); and develop an initial system design (Subtask 4). If feasible, consideration may be given to the development of a prototype laboratory test system that could potentially be used in commercial transport aircraft (Subtask 5). These systems should be capable of providing inert nitrogen gas for improved fire cargo compartment fire suppression and fuel tank inerting and emergency oxygen for crew and passenger use. Subtask I of this research study, presented herein, defines current production aircraft certification requirements and design objectives necessary to meet mandatory FAA certification requirements and Boeing design and performance specifications. These requirements will be utilized for baseline comparisons for subsequent OBIGGS/OBOGS application evaluations and assessments.

  13. Rigel: An interactive structured grid generation system

    SciTech Connect

    Hachfeld, W.D.; Khamayseh, A.K.; Hansen, G.A.

    1998-02-01

    An interactive structured grid generation application that facilitates the construction of complex, discretized, simulation models directly from the original CAD geometry specifications is presented. The application, named Rigel, reads physical model descriptions generated by modern CAD packages. Rigel includes a suite of interactive geometry editing functions to assist the user in the construction of a topologically correct geometry from the original CAD specification. Once a topologically correct geometry is created, an interactively steered grid generation capability is provided to facilitate the construction of an appropriate discretization for the simulation. Grid quality enhancement is supported with the application of user-directed elliptic smoothing, refinement, and coarsening operators. After a grid is completed, various output filters are supplied to write an input file for the target simulation code. This paper is intended to provide an overview of the mechanics of this process and to highlight some of the novel algorithms and techniques employed.

  14. An automated system for generating program documentation

    NASA Technical Reports Server (NTRS)

    Hanney, R. J.

    1970-01-01

    A documentation program was developed in which the emphasis is placed on text content rather than flowcharting. It is keyword oriented, with 26 keywords that control the program. Seventeen of those keywords are recognized by the flowchart generator, three are related to text generation, and three have to do with control card and deck displays. The strongest advantage offered by the documentation program is that it produces the entire document. The document is prepared on 35mm microfilm, which is easy to store, and letter-size reproductions can be made inexpensively on bond paper.

  15. Synchronization System for Next Generation Light Sources

    SciTech Connect

    Zavriyev, Anton

    2014-03-27

    An alternative synchronization technique – one that would allow explicit control of the pulse train including its repetition rate and delay is clearly desired. We propose such a scheme. Our method is based on optical interferometry and permits synchronization of the pulse trains generated by two independent mode-locked lasers. As the next generation x-ray sources will be driven by a clock signal derived from a mode-locked optical source, our technique will provide a way to synchronize x-ray probe with the optical pump pulses.

  16. Computer Generated Hologram System for Wavefront Measurement System Calibration

    NASA Technical Reports Server (NTRS)

    Olczak, Gene

    2011-01-01

    Computer Generated Holograms (CGHs) have been used for some time to calibrate interferometers that require nulling optics. A typical scenario is the testing of aspheric surfaces with an interferometer placed near the paraxial center of curvature. Existing CGH technology suffers from a reduced capacity to calibrate middle and high spatial frequencies. The root cause of this shortcoming is as follows: the CGH is not placed at an image conjugate of the asphere due to limitations imposed by the geometry of the test and the allowable size of the CGH. This innovation provides a calibration system where the imaging properties in calibration can be made comparable to the test configuration. Thus, if the test is designed to have good imaging properties, then middle and high spatial frequency errors in the test system can be well calibrated. The improved imaging properties are provided by a rudimentary auxiliary optic as part of the calibration system. The auxiliary optic is simple to characterize and align to the CGH. Use of the auxiliary optic also reduces the size of the CGH required for calibration and the density of the lines required for the CGH. The resulting CGH is less expensive than the existing technology and has reduced write error and alignment error sensitivities. This CGH system is suitable for any kind of calibration using an interferometer when high spatial resolution is required. It is especially well suited for tests that include segmented optical components or large apertures.

  17. Automatic control system generation for robot design validation

    NASA Technical Reports Server (NTRS)

    Bacon, James A. (Inventor); English, James D. (Inventor)

    2012-01-01

    The specification and drawings present a new method, system and software product for and apparatus for generating a robotic validation system for a robot design. The robotic validation system for the robot design of a robotic system is automatically generated by converting a robot design into a generic robotic description using a predetermined format, then generating a control system from the generic robotic description and finally updating robot design parameters of the robotic system with an analysis tool using both the generic robot description and the control system.

  18. Post-flight BET products for the 2nd discovery entry, STS-19 (51-A)

    NASA Technical Reports Server (NTRS)

    Kelly, G. M.; Mcconnell, J. G.; Heck, M. L.; Troutman, P. A.; Waters, L. A.; Findlay, J. T.

    1985-01-01

    The post-flight products for the second Discovery flight, STS-19 (51-A), are summarized. The inertial best estimate trajectory (BET), BT19D19/UN=169750N, was developed using spacecraft dynamic measurements from Inertial Measurement Unit 2 (IMU2) in conjunction with the best tracking coverage available for any of the earlier Shuttle entries. As a consequence of the latter, an anchor epoch was selected which conforms to an initial altitude of greater than a million feet. The Extended BET, ST19BET/UN=274885C, incorporated the previously mentioned inertial reconstructed state information and the Langley Atmospheric Information Retrieval System (LAIRS) atmosphere, ST19MET/UN=712662N, with some minor exceptions. Primary and back-up AEROBET reels are NK0165 and NK0201, respectively. This product was only developed over the lowermost 360 kft altitude range due to atmosphere problems but this relates to altitudes well above meaningful signal in the IMUs. Summary results generated from the AEROBET for this flight are presented with meaningful configuration and statistical comparisons from the previous thirteen flights. Modified maximum likelihood estimation (MMLE) files were generated based on IMU2 and the Rate Gyro Assembly/Accelerometer Assembly (RGA/AA), respectively. Appendices attached define spacecraft and physical constants utilized, show plots of the final tracking data residuals from the post-flight fit, list relevant parameters from the BET at a two second spacing, and retain for archival purpose all relevant input and output tapes and files generated.

  19. Study on Micro Wind Generator System for Automobile

    NASA Astrophysics Data System (ADS)

    Fujimoto, Koji; Washizu, Shinsuke; Ichikawa, Tomohiko; Yukita, Kazuto; Goto, Yasuyuki; Ichiyanagi, Katsuhiro; Oshima, Takamitsu; Hayashi, Niichi; Tobi, Nobuo

    This paper proposes the micro wind generator system for automobile. This proposes system is composed of the deflector, the micro windmill, the generator, and electric storage device. Then, the effectiveness is confirmed from an examination using air blower. Therefore, new energy can be expected to be obtained by installing this system in the truck.

  20. PREFACE: 2nd Russia-Japan-USA Symposium on the Fundamental and Applied Problems of Terahertz Devices and Technologies (RJUS TeraTech - 2013)

    NASA Astrophysics Data System (ADS)

    Karasik, Valeriy; Ryzhii, Viktor; Yurchenko, Stanislav

    2014-03-01

    The 2nd Russia-Japan-USA Symposium 'The Fundamental & Applied Problems of Terahertz Devices & Technologies' (RJUS TeraTech - 2013) Bauman Moscow State Technical University Moscow, Russia, 3-6 June, 2013 The 2nd Russia-Japan-USA Symposium 'The Fundamental & Applied Problems of Terahertz Devices & Technologies' (RJUS TeraTech - 2013) was held in Bauman Moscow State Technical University on 3-6 June 2013 and was devoted to modern problems of terahertz optical technologies. RJUS TeraTech 2013 was organized by Bauman Moscow State Technical University in cooperation with Tohoku University (Sendai, Japan) and University of Buffalo (The State University of New York, USA). The Symposium was supported by Bauman Moscow State Technical University (Moscow, Russia) and Russian Foundation for Basic Research (grant number 13-08-06100-g). RJUS TeraTech - 2013 became a foundation for sharing and discussing modern and promising achievements in fundamental and applied problems of terahertz optical technologies, devices based on grapheme and grapheme strictures, condensed matter of different nature. Among participants of RJUS TeraTech - 2013, there were more than 100 researchers and students from different countries. This volume contains proceedings of the 2nd Russia-Japan-USA Symposium 'The Fundamental & Applied Problems of Terahertz Devices & Technologies'. Valeriy Karasik, Viktor Ryzhii and Stanislav Yurchenko Bauman Moscow State Technical University Symposium chair Anatoliy A Aleksandrov, Rector of BMSTU Symposium co-chair Valeriy E Karasik, Head of the Research and Educational Center 'PHOTONICS AND INFRARED TECHNOLOGY' (Russia) Invited Speakers Taiichi Otsuji, Research Institute of Electrical Communication, Tohoku University, Sendai, Japan Akira Satou, Research Institute of Electrical Communication, Tohoku University, Sendai, Japan Michael Shur, Electrical, Computer and System Engineering and Physics, Applied Physics, and Astronomy, Rensselaer Polytechnic Institute, NY, USA Natasha

  1. Thermoelectric generator cooling system and method of control

    SciTech Connect

    Prior, Gregory P; Meisner, Gregory P; Glassford, Daniel B

    2012-10-16

    An apparatus is provided that includes a thermoelectric generator and an exhaust gas system operatively connected to the thermoelectric generator to heat a portion of the thermoelectric generator with exhaust gas flow through the thermoelectric generator. A coolant system is operatively connected to the thermoelectric generator to cool another portion of the thermoelectric generator with coolant flow through the thermoelectric generator. At least one valve is controllable to cause the coolant flow through the thermoelectric generator in a direction that opposes a direction of the exhaust gas flow under a first set of operating conditions and to cause the coolant flow through the thermoelectric generator in the direction of exhaust gas flow under a second set of operating conditions.

  2. System and method for generating a relationship network

    DOEpatents

    Franks, Kasian; Myers, Cornelia A.; Podowski, Raf M.

    2011-07-26

    A computer-implemented system and process for generating a relationship network is disclosed. The system provides a set of data items to be related and generates variable length data vectors to represent the relationships between the terms within each data item. The system can be used to generate a relationship network for documents, images, or any other type of file. This relationship network can then be queried to discover the relationships between terms within the set of data items.

  3. System and method for generating a relationship network

    DOEpatents

    Franks, Kasian; Myers, Cornelia A; Podowski, Raf M

    2015-05-05

    A computer-implemented system and process for generating a relationship network is disclosed. The system provides a set of data items to be related and generates variable length data vectors to represent the relationships between the terms within each data item. The system can be used to generate a relationship network for documents, images, or any other type of file. This relationship network can then be queried to discover the relationships between terms within the set of data items.

  4. Differential contribution of specific working memory components to mathematics achievement in 2nd and 3rd graders.

    PubMed

    Meyer, M L; Salimpoor, V N; Wu, S S; Geary, D C; Menon, V

    2010-04-01

    The contribution of the three core components of working memory (WM) to the development of mathematical skills in young children is poorly understood. The relation between specific WM components and Numerical Operations, which emphasize computation and fact retrieval, and Mathematical Reasoning, which emphasizes verbal problem solving abilities in 48 2nd and 50 3rd graders was assessed using standardized WM and mathematical achievement measures. For 2nd graders, the central executive and phonological components predicted Mathematical Reasoning skills; whereas the visuo-spatial component predicted both Mathematical Reasoning and Numerical Operations skills in 3rd graders. This pattern suggests that the central executive and phonological loop facilitate performance during early stages of mathematical learning whereas visuo-spatial representations play an increasingly important role during later stages. We propose that these changes reflect a shift from prefrontal to parietal cortical functions during mathematical skill acquisition. Implications for learning and individual differences are discussed. PMID:21660238

  5. On-line diagnostic system for power generators

    SciTech Connect

    Skormin, V.A.; Goodenough, G.S.; Huber, R.K.

    1996-12-31

    A novel approach to diagnostics of a power generator is developed. It utilizes readily available data acquired by the existing computer-based monitoring/control system. Diagnostic procedures detect various trends in the generator data and interpret these trends in the generator data and interpret these trends as changes in the generator performance caused by incipient failures. Results of trend analyses, subjected to statistical validation, facilitate failure prediction and identification thus providing the justification for service when needed. The procedures are incorporated in a diagnostic system implemented in a PC interfaced with the existing VAX-based process monitoring and control system. The diagnostic system provides graphical display of the diagnostic messages.

  6. Next Generation Space Surveillance System-of-Systems

    NASA Astrophysics Data System (ADS)

    McShane, B.

    2014-09-01

    International economic and military dependence on space assets is pervasive and ever-growing in an environment that is now congested, contested, and competitive. There are a number of natural and man-made risks that need to be monitored and characterized to protect and preserve the space environment and the assets within it. Unfortunately, today's space surveillance network (SSN) has gaps in coverage, is not resilient, and has a growing number of objects that get lost. Risks can be efficiently and effectively mitigated, gaps closed, resiliency improved, and performance increased within a next generation space surveillance network implemented as a system-of-systems with modern information architectures and analytic techniques. This also includes consideration for the newest SSN sensors (e.g. Space Fence) which are born Net-Centric out-of-the-box and able to seamlessly interface with the JSpOC Mission System, global information grid, and future unanticipated users. Significant opportunity exists to integrate legacy, traditional, and non-traditional sensors into a larger space system-of-systems (including command and control centers) for multiple clients through low cost sustainment, modification, and modernization efforts. Clients include operations centers (e.g. JSpOC, USSTRATCOM, CANSPOC), Intelligence centers (e.g. NASIC), space surveillance sensor sites (e.g. AMOS, GEODSS), international governments (e.g. Germany, UK), space agencies (e.g. NASA), and academic institutions. Each has differing priorities, networks, data needs, timeliness, security, accuracy requirements and formats. Enabling processes and technologies include: Standardized and type accredited methods for secure connections to multiple networks, machine-to-machine interfaces for near real-time data sharing and tip-and-queue activities, common data models for analytical processing across multiple radar and optical sensor types, an efficient way to automatically translate between differing client and

  7. Teachers' Spatial Anxiety Relates to 1st-and 2nd-Graders' Spatial Learning

    ERIC Educational Resources Information Center

    Gunderson, Elizabeth A.; Ramirez, Gerardo; Beilock, Sian L.; Levine, Susan C.

    2013-01-01

    Teachers' anxiety about an academic domain, such as math, can impact students' learning in that domain. We asked whether this relation held in the domain of spatial skill, given the importance of spatial skill for success in math and science and its malleability at a young age. We measured 1st-and 2nd-grade teachers' spatial anxiety…

  8. Generating Apparatus for Gas Heat Pump System using Sensorless-Controlled Permanent Magnet Synchronous Generator

    NASA Astrophysics Data System (ADS)

    Toba, Akio; Fujita, Kouetsu; Maeda, Toshihiro; Kato, Tomohiko

    A unique generating system for Gas heat pump system (GHP) is presented. The GHP is an air-conditioning system, in which the compressors are driven by a gas engine. The proposed system is applied to the outside unit of GHP to feed the electrical equipments inside. The system utilizes a permanent magnet synchronous generator, which is connected to the gas engine, to realize high-efficiency and small-size. The generator is controlled by a converter with sensorless control technology to eliminate the position sensor. Another major topic is the “free-run startup" technique to start the converter when the generator is rotating. The system configuration and principles of the techniques are set forth, followed by experimental results which show that the system works properly and successfully.

  9. Completion system for downhole steam generator

    SciTech Connect

    Vandevier, J.E.

    1989-05-30

    This patent describes an apparatus for providing electrical power to a downhole steam generator in a cased well. The method consists of: a packer supported on a string of tubing, the packer having means for sealing against casing in the well and at least one conduit extending longitudinally through the packer; a connector box mounted below the lower end of the packer, the connector box having a connector plate containing a plurality of passages; a plurality of feed through electrical connectors mounted in insulators in the passages in the connector plate; support means for mounting the steam generator below the connector box; an aperture located in the sidewall of the tubing immediately above the packer; an electrical cable extending from the surface alongside the tubing into the aperture and through the conduit into the connector box, the electrical cable having a plurality of electrical conductors, each of which ends in a terminal that is electrically connected to one of the electrical connectors; and electrical conductors extending between the steam generator and engaging a lower end of each electrical connector in the connection plate.

  10. Natural discourse reference generation reduces cognitive load in spoken systems

    PubMed Central

    Campana, E.; Tanenhaus, M. K.; Allen, J. F.; Remington, R.

    2014-01-01

    The generation of referring expressions is a central topic in computational linguistics. Natural referring expressions – both definite references like ‘the baseball cap’ and pronouns like ‘it’ – are dependent on discourse context. We examine the practical implications of context-dependent referring expression generation for the design of spoken systems. Currently, not all spoken systems have the goal of generating natural referring expressions. Many researchers believe that the context-dependency of natural referring expressions actually makes systems less usable. Using the dual-task paradigm, we demonstrate that generating natural referring expressions that are dependent on discourse context reduces cognitive load. Somewhat surprisingly, we also demonstrate that practice does not improve cognitive load in systems that generate consistent (context-independent) referring expressions. We discuss practical implications for spoken systems as well as other areas of referring expression generation. PMID:25328423

  11. Resilient Control Systems: Next Generation Design Research

    SciTech Connect

    Craig Rieger

    2009-05-01

    Since digital control systems were introduced to the market more than 30 years ago, the operational efficiency and stability gained through their use have fueled our migration and ultimate dependence on them for the monitoring and control of critical infrastructure. While these systems have been designed for functionality and reliability, a hostile cyber environment and uncertainties in complex networks and human interactions have placed additional parameters on the design expectations for control systems.

  12. PREFACE: 1st-2nd Young Researchers Meetings in Rome - Proceedings

    NASA Astrophysics Data System (ADS)

    YRMR Organizing Committee; Cannuccia, E.; Mazzaferro, L.; Migliaccio, M.; Pietrobon, D.; Stellato, F.; Veneziani, M.

    2011-03-01

    Students in science, particularly in physics, face a fascinating and challenging future. Scientists have proposed very interesting theories, which describe the microscopic and macroscopic world fairly well, trying to match the quantum regime with cosmological scales. Between the extremes of this scenario, biological phenomena in all their complexity take place, challenging the laws we observe in the atomic and sub-atomic world. More and more accurate and complex experiments have been devised and these are now going to test the paradigms of physics. Notable experiments include: the Large Hadronic Collider (LHC), which is going to shed light on the physics of the Standard Model of Particles and its extensions; the Planck-Herschel satellites, which target a very precise measurement of the properties of our Universe; and the Free Electron Lasers facilities, which produce high-brilliance, ultrafast X-ray pulses, allowing the investigation of the fundamental processes of solid state physics, chemistry, and biology. These projects are the result of huge collaborations spread across the world, involving scientists belonging to different and complementary research fields: physicists, chemists, biologists and others, keen to make the best of these extraordinary laboratories. Even though each branch of science is experiencing a process of growing specialization, it is very important to keep an eye on the global picture, remaining aware of the deep interconnections between inherent fields. This is even more crucial for students who are beginning their research careers. These considerations motivated PhD students and young post-docs connected to the Roman scientific research area to organize a conference, to establish the background and the network for interactions and collaborations. This resulted in the 1st and 2nd Young Researchers Meetings in Rome (http://ryrm.roma2.infn.it), one day conferences aimed primarily at graduate students and post-docs, working in physics in Italy

  13. Integrated geometry and grid generation system for complex configurations

    NASA Technical Reports Server (NTRS)

    Akdag, Vedat; Wulf, Armin

    1992-01-01

    A grid generation system was developed that enables grid generation for complex configurations. The system called ICEM/CFD is described and its role in computational fluid dynamics (CFD) applications is presented. The capabilities of the system include full computer aided design (CAD), grid generation on the actual CAD geometry definition using robust surface projection algorithms, interfacing easily with known CAD packages through common file formats for geometry transfer, grid quality evaluation of the volume grid, coupling boundary condition set-up for block faces with grid topology generation, multi-block grid generation with or without point continuity and block to block interface requirement, and generating grid files directly compatible with known flow solvers. The interactive and integrated approach to the problem of computational grid generation not only substantially reduces manpower time but also increases the flexibility of later grid modifications and enhancements which is required in an environment where CFD is integrated into a product design cycle.

  14. Sullair low pressure downhole steam generator system

    SciTech Connect

    Klingler, R.P.

    1982-01-01

    Scientists and engineers are continually searching for techniques to release more oil from known reservoirs to improve productivity and lessen dependence on new finds. Based on a record of success dating to the early 1960s, thermal methods, and in particular methodology for steam treating deep reservoirs, have become an area of intense activity. In the U.S. alone, it has been reported that ca 300,000 bopd was produced in 1981 by traditional surface steam methods. Of the thermal techniques emerging, downhole steam generation is of particular interest in this discussion. 11 references.

  15. Introduction to grid generation systems in turbomachinery

    NASA Astrophysics Data System (ADS)

    Camarero, R.; Ozell, B.; Reggio, M.; Caron, A.

    Body-fitted curvilinear grid generation for the numerical simulation of three dimensional flow in turbomachines is introduced. The grids yield coordinate curves aligned with the domain boundaries. The numerical scheme for the governing equations is carried out on a rectangular mesh, giving a simpler and more accurate algorithm since bondaries coincide with coordinate grids, and no interpolation is required. The geometric complexity, through the transformation, is imbedded into the coefficients of the governing equations, affording the possibility of writing generalized codes applicable to a variety of geometries. This results in a great saving in the code development effort.

  16. 3-D Mesh Generation Nonlinear Systems

    1994-04-07

    INGRID is a general-purpose, three-dimensional mesh generator developed for use with finite element, nonlinear, structural dynamics codes. INGRID generates the large and complex input data files for DYNA3D, NIKE3D, FACET, and TOPAZ3D. One of the greatest advantages of INGRID is that virtually any shape can be described without resorting to wedge elements, tetrahedrons, triangular elements or highly distorted quadrilateral or hexahedral elements. Other capabilities available are in the areas of geometry and graphics. Exact surfacemore » equations and surface intersections considerably improve the ability to deal with accurate models, and a hidden line graphics algorithm is included which is efficient on the most complicated meshes. The primary new capability is associated with the boundary conditions, loads, and material properties required by nonlinear mechanics programs. Commands have been designed for each case to minimize user effort. This is particularly important since special processing is almost always required for each load or boundary condition.« less

  17. Expert system for generating fuel movement procedures

    SciTech Connect

    Hendrickson, J.P. )

    1991-01-01

    Commercial nuclear power reactors are required by federal law and their operating license to track and control the movement of nuclear fuel. Planning nuclear fuel movements during a refueling outage by hand is a tedious process involving an initial state and final state separated by physical and administrative constraints. Since the initial and final states as well as all constraints are known, an expert computer system for planning this process is possible. Turkey Point station worked with the Electric Power Research Institute (EPRI)-selected vendor to implement such a system. Over the course of a 2-yr period, the EPRI Fuel Shuffle Planning System evolved from a high-tech word processor to an expert system capable of planning all fuel movement sequences required to refuel a nuclear reactor core. Turkey Point site is composed to two pressurized water reactor units owned and operated by Florida Power and Light Company.

  18. The Controlled Drug Delivery Systems: Past Forward and Future Back

    PubMed Central

    Park, Kinam

    2014-01-01

    The controlled drug delivery technology has progressed over the last six decades. It began in 1952 with the introduction of the first sustained release formulation. The 1st generation (1950-1980) of drug delivery was focused on developing oral and transdermal sustained release systems and establishing the controlled drug release mechanisms. Attention of the 2nd generation (1980-2010) was dedicated to development of zero-order release systems, self-regulated drug delivery systems, long-term depot formulations, and nanotechnology-based delivery systems. The latter part of the 2nd generation was consumed mostly for studying nanoparticle formulations. The Journal of Controlled Release (JCR) has played a pivotal role during the 2nd generation of drug delivery technologies, and it will continue playing a leading role for the next generation. Taking the right path towards the productive 3rd generation of drug delivery technologies requires honest open dialogues without any preconceived ideas of the past. The drug delivery field needs to take a bold approach of designing the future drug delivery formulations first, based on today’s necessities, and produce necessary innovations. The JCR will provide the forum for sharing the new ideas that will shape the 3rd generation of drug delivery technologies. PMID:24794901

  19. Generator and rechargeable battery system for pedal powered vehicles

    SciTech Connect

    Ryan, D.

    1985-11-26

    A generator and rechargeable battery system for use with pedal powered vehicles, such as bicycles, and where either the generator or battery can intermittently power a load such as a lighting system of the vehicle in one mode of operation, and in which the generator can recharge the battery in another mode of operation. A simple selection switch which is manually operable by the operator of the vehicle enables selection between powering of the load or recharging of the battery.

  20. Fifth Generation Computer-Assisted Career Guidance Systems.

    ERIC Educational Resources Information Center

    Carson, Andrew D.; Cartwright, Glenn F.

    1997-01-01

    Emerging "fifth-generation" computer-assisted career guidance systems include Internet-based resources such as listservs and Web sites. Obstacles to fifth-generation systems include confidentiality, counselor resistance, and lack of training. Counselors can aid their development by authoring, collaborating, evaluating, and advocating for equal…

  1. A System for Automatically Generating Scheduling Heuristics

    NASA Technical Reports Server (NTRS)

    Morris, Robert

    1996-01-01

    The goal of this research is to improve the performance of automated schedulers by designing and implementing an algorithm by automatically generating heuristics by selecting a schedule. The particular application selected by applying this method solves the problem of scheduling telescope observations, and is called the Associate Principal Astronomer. The input to the APA scheduler is a set of observation requests submitted by one or more astronomers. Each observation request specifies an observation program as well as scheduling constraints and preferences associated with the program. The scheduler employs greedy heuristic search to synthesize a schedule that satisfies all hard constraints of the domain and achieves a good score with respect to soft constraints expressed as an objective function established by an astronomer-user.

  2. EDITORIAL: Selected Papers from OMS'07, the 2nd Topical Meeting of the European Optical Society on Optical Microsystems (OMS)

    NASA Astrophysics Data System (ADS)

    Rendina, Ivo; Fazio, Eugenio; Ferraro, Pietro

    2008-06-01

    OMS'07 was the 2nd Topical Meeting of the European Optical Society (EOS) on Optical Microsystems (OMS). It was organized by the EOS in the frame of its international topical meeting activity, and after the success of the inaugural meeting was once again held in Italy, 30 September to 3 October 2007, amidst the wonderful scenery of the Island of Capri. The local organizing committee was composed of researchers from `La Sapienza' University in Rome and the National Council of Research (CNR) in Naples, Italy. A selected group of leading scientists in the field formed the international scientific committee. The conference was fully dedicated to the most recent advancements carried out in the field of optical microsystems. More then 150 scientists coming from five continents attended the conference and more than 100 papers were presented, organized into the following sessions: Photonic cystals and metamaterials Optofluidic microsystems and devices Optical microsystems and devices New characterization methods for materials and devices Application of optical systems Optical sources and photodetectors Optical resonators Nonlinear optic devices Micro-optical devices. Four keynote lecturers were invited for the Plenary sessions: Federico Capasso, Harvard University, USA; Bahram Javidi, University of Connecticut, USA (Distinguished Lecturer, Emeritus of LEOS--IEEE Society); Demetri Psaltis, EPFL, Lausanne, Switzerland; Ammon Yariv, California Institute of Technology, USA. Furthermore, 21 invited speakers opened each session of the conference with their talks. In addition a special session was organized to celebrate eighty years of the Isituto Nazionale di Ottica Applicata (INOA) of CNR. The special invited speaker for this session was Professor Theodor W Hänsch (Nobel Prize in Physics, 2005), who gave a lecture entitled `What can we do with optical frequency combs?' In this special issue of Journal of Optics A: Pure and Applied Optics, a selection of the most interesting

  3. Thermochemistry of glasses along the 2NdAlO3 3SiO2 join

    NASA Astrophysics Data System (ADS)

    Zhang, Yahong; Navrotsky, Alexandra; Tangeman, Jean A.; Weber, J. K. Richard

    2003-08-01

    Five Nd-aluminosilicate glasses along the 2NdAlO3-3SiO2 join were synthesized using conventional drop-quench techniques. A sixth glass, with the end-member NdAlO3 composition, required synthesis by containerless liquid-phase processing methods to avoid crystallization. Enthalpies of drop solution (DeltaHds) and formation (DeltaHf) for the Nd-aluminosilicate glasses and the NdAlO3-composition end-member glass were measured in molten 2PbO-B2O3 at 1078 K in a twin Calvet type calorimeter. Values for DeltaHds for the Nd-aluminosilicate glasses increase with decreasing silica content from 130.7 +/- 1.5 to 149.6 +/- 0.6 kJ mol-1. Similarly, values of DeltaHf increase with decreasing silica content from 41.0 +/- 2.0 to 59.0 +/- 1.6 kJ mol-1. Values of DeltaHds and DeltaHf for NdAlO3-composition glass were measured as 99.3 +/- 0.9 and 139.2 +/- 2.1 kJ mol-1, respectively. Using transposed temperature drop calorimetry, the enthalpy of vitrification for NdAlO3-composition glass was measured as 69.5 +/- 0.9 kJ mol-1 relative to the stable crystalline neodymium aluminium perovskite (NdAlO3) phase. Enthalpies of mixing were calculated based on amorphous end members; the strongly negative values support the absence of immiscibility in this system. Differential scanning calorimetry was used to determine glass transition (Tg) and crystallization (Tx) temperatures, as well as values for the configurational heat capacity (DeltaCP(Tg)) and the temperature range of the supercooled liquid interval (DeltaT(SCL)). The NdAlO3-composition glass showed no evidence of a glass transition prior to crystallization; only a single exotherm was observed, the onset of which occurred at 1045 K. For the Nd-aluminosilicates, values of Tg and DeltaT(SCL) increase with increasing silica content, from 1128 to 1139 K and from ~95 to ~175 K, respectively. Values of (DeltaCP(Tg)) increase with decreasing silica content, from ~27 to ~75 J/g fw lowastK, reflecting the increasing fragility and decreasing

  4. Solar Energy Systems for Lunar Oxygen Generation

    NASA Technical Reports Server (NTRS)

    Colozza, Anthony J.; Heller, Richard S.; Wong, Wayne A.; Hepp, Aloysius F.

    2010-01-01

    An evaluation of several solar concentrator-based systems for producing oxygen from lunar regolith was performed. The systems utilize a solar concentrator mirror to provide thermal energy for the oxygen production process. Thermal energy to power a Stirling heat engine and photovoltaics are compared for the production of electricity. The electricity produced is utilized to operate the equipment needed in the oxygen production process. The initial oxygen production method utilized in the analysis is hydrogen reduction of ilmenite. Utilizing this method of oxygen production a baseline system design was produced. This baseline system had an oxygen production rate of 0.6 kg/hr with a concentrator mirror size of 5 m. Variations were performed on the baseline design to show how changes in the system size and process (rate) affected the oxygen production rate. An evaluation of the power requirements for a carbothermal lunar regolith reduction reactor has also been conducted. The reactor had a total power requirement between 8,320 to 9,961 W when producing 1000 kg/year of oxygen. The solar concentrator used to provide the thermal power (over 82 percent of the total energy requirement) would have a diameter of less than 4 m.

  5. Next generation interatomic potentials for condensed systems

    NASA Astrophysics Data System (ADS)

    Handley, Christopher Michael; Behler, Jörg

    2014-07-01

    The computer simulation of condensed systems is a challenging task. While electronic structure methods like density-functional theory (DFT) usually provide a good compromise between accuracy and efficiency, they are computationally very demanding and thus applicable only to systems containing up to a few hundred atoms. Unfortunately, many interesting problems require simulations to be performed on much larger systems involving thousands of atoms or more. Consequently, more efficient methods are urgently needed, and a lot of effort has been spent on the development of a large variety of potentials enabling simulations with significantly extended time and length scales. Most commonly, these potentials are based on physically motivated functional forms and thus perform very well for the applications they have been designed for. On the other hand, they are often highly system-specific and thus cannot easily be transferred from one system to another. Moreover, their numerical accuracy is restricted by the intrinsic limitations of the imposed functional forms. In recent years, several novel types of potentials have emerged, which are not based on physical considerations. Instead, they aim to reproduce a set of reference electronic structure data as accurately as possible by using very general and flexible functional forms. In this review we will survey a number of these methods. While they differ in the choice of the employed mathematical functions, they all have in common that they provide high-quality potential-energy surfaces, while the efficiency is comparable to conventional empirical potentials. It has been demonstrated that in many cases these potentials now offer a very interesting new approach to study complex systems with hitherto unreached accuracy.

  6. An Integrated Safety Assessment Methodology for Generation IV Nuclear Systems

    SciTech Connect

    Timothy J. Leahy

    2010-06-01

    The Generation IV International Forum (GIF) Risk and Safety Working Group (RSWG) was created to develop an effective approach for the safety of Generation IV advanced nuclear energy systems. Early work of the RSWG focused on defining a safety philosophy founded on lessons learned from current and prior generations of nuclear technologies, and on identifying technology characteristics that may help achieve Generation IV safety goals. More recent RSWG work has focused on the definition of an integrated safety assessment methodology for evaluating the safety of Generation IV systems. The methodology, tentatively called ISAM, is an integrated “toolkit” consisting of analytical techniques that are available and matched to appropriate stages of Generation IV system concept development. The integrated methodology is intended to yield safety-related insights that help actively drive the evolving design throughout the technology development cycle, potentially resulting in enhanced safety, reduced costs, and shortened development time.

  7. Next Generation Avionics System for Satellite Application

    NASA Astrophysics Data System (ADS)

    Wiegand, M.; Schmidt, G.; Hahn, M.

    This paper describes the new modular avionics system developed at Astrium GmbH in Munich in the frame of Gammabus, a DLR-funded development for constellation programs. Modularity, reusability and time to market are major goals of the development. The system consists of the on-board computer core modules, namely processor module, telemetry/telecommand/reconfiguration/safeguard-memory module and power converter module, an onboard software computing environment as well as a development and verification environment including a real-time testbed and ground station interface (SCOS) to support mission simulation tests. The new concept is taking advantage of improvements in microelectronics and software technology to improve performance while reducing costs.

  8. Reengineering refinery systems: The next generation desktop

    SciTech Connect

    Kennedy, J.P.

    1996-09-01

    As refiners reengineer, flatten, or downsize, they remove entire levels of people, leaving in a state of flux the legacy systems and procedures that were designed to support the old organization. The remaining people have new, expanded positions as they absorb roles of the flattened organization. Reengineering will thus drive a new type of structural obsolescence. In addition to normal departmental software aging, many roles must be supported throughout the corporation instead of within a dedicated group. The net result is that reengineering provides an opportunity and mandate to rethink what roles are needed to support refining and what software is needed to support those roles. This article provides both a component architecture technology background and a plan of action for implementing a new manufacturing system that includes the software required to support refinery operations. The emphasis on infrastructure is key to success; these projects are too big to implement immediately. A solid infrastructure and good support feed the continuous improvement process.

  9. 2nd Radio and Antenna Days of the Indian Ocean (RADIO 2014)

    NASA Astrophysics Data System (ADS)

    2014-10-01

    It was an honor and a great pleasure for all those involved in its organization to welcome the participants to the ''Radio and Antenna Days of the Indian Ocean'' (RADIO 2014) international conference that was held from 7th to 10th April 2014 at the Sugar Beach Resort, Wolmar, Flic-en-Flac, Mauritius. RADIO 2014 is the second of a series of conferences organized in the Indian Ocean region. The aim of the conference is to discuss recent developments, theories and practical applications covering the whole scope of radio-frequency engineering, including radio waves, antennas, propagation, and electromagnetic compatibility. The RADIO international conference emerged following discussions with engineers and scientists from the countries of the Indian Ocean as well as from other parts of the world and a need was felt for the organization of such an event in this region. Following numerous requests, the Island of Mauritius, worldwide known for its white sandy beaches and pleasant tropical atmosphere, was again chosen for the organization of the 2nd RADIO international conference. The conference was organized by the Radio Society, Mauritius and the Local Organizing Committee consisted of scientists from SUPELEC, France, the University of Mauritius, and the University of Technology, Mauritius. We would like to take the opportunity to thank all people, institutions and companies that made the event such a success. We are grateful to our gold sponsors CST and FEKO as well as URSI for their generous support which enabled us to partially support one PhD student and two scientists to attend the conference. We would also like to thank IEEE-APS and URSI for providing technical co-sponsorship. More than hundred and thirty abstracts were submitted to the conference. They were peer-reviewed by an international scientific committee and, based on the reviews, either accepted, eventually after revision, or rejected. RADIO 2014 brought together participants from twenty countries spanning

  10. Method and system for storing and generating hydrogen

    NASA Technical Reports Server (NTRS)

    Kindler, Andrew (Inventor); Narayanan, Sri R. (Inventor); Huang, Yuhong (Inventor)

    2011-01-01

    A method and system for storing and generating hydrogen. The method comprises generating hydrogen and heat from the reaction of a metal or metal compound with water. The heat generated from this reaction may then be converted to other forms of energy such as by passing the heat through a thermal electric device to recover electrical energy for storage in a battery. In an alternative and preferred embodiment, the heat is used to drive additional reactions for generating more hydrogen and is preferably used to drive an endothermic dehydrogenation reaction resulting in increased hydrogen generation and consumption of the heat.

  11. Automatic generation control of a hydrothermal system with new area control error considering generation rate constraint

    SciTech Connect

    Das, D.; Nanda, J.; Kothari, M.L.; Kothari, D.P. )

    1990-01-01

    The paper presents an analysis of the automatic generation control based on a new area control error strategy for an interconnected hydrothermal system in the discrete-mode considering generation rate constraints (GRCs). The investigations reveal that the system dynamic performances following a step load perturbation in either of the areas with constrained optimum gain settings and unconstrained optimum gain settings are not much different, hence optimum controller settings can be achieved without considering GRCs in the mathematical model.

  12. Model-Driven Test Generation of Distributed Systems

    NASA Technical Reports Server (NTRS)

    Easwaran, Arvind; Hall, Brendan; Schweiker, Kevin

    2012-01-01

    This report describes a novel test generation technique for distributed systems. Utilizing formal models and formal verification tools, spe cifically the Symbolic Analysis Laboratory (SAL) tool-suite from SRI, we present techniques to generate concurrent test vectors for distrib uted systems. These are initially explored within an informal test validation context and later extended to achieve full MC/DC coverage of the TTEthernet protocol operating within a system-centric context.

  13. Research at the CEA in the field of safety in 2nd and 3rd generation light water reactors

    NASA Astrophysics Data System (ADS)

    Billot, Philippe

    2012-05-01

    The research programs at the CEA in the field of safety in nuclear reactors are carried out in a framework of international partnerships. Their purpose is to develop studies on: The methods allowing for the determination of earthquake hazards and their consequences; The behaviour of fuel in an accident situation; The comprehension of deflagration and detonation phenomena of hydrogen and the search for effective prevention methods involving an explosion risk; The cooling of corium in order to stop its progression in and outside the vessel thereby reducing the risk of perforating the basemat; The behaviour of the different fission product families according to their volatility for the UO2 and MOX fuels.

  14. Development of a 2nd Generation Decision Support Tool to Optimize Resource and Energy Recovery for Municipal Solid Waste

    EPA Science Inventory

    In 2012, EPA’s Office of Research and Development released the MSW decision support tool (MSW-DST) to help identify strategies for more sustainable MSW management. Depending upon local infrastructure, energy grid mix, population density, and waste composition and quantity,...

  15. 2nd Generation RLV Risk Reduction Definition Program: Pratt & Whitney Propulsion Risk Reduction Requirements Program (TA-3 & TA-4)

    NASA Technical Reports Server (NTRS)

    Matlock, Steve

    2001-01-01

    This is the final report and addresses all of the work performed on this program. Specifically, it covers vehicle architecture background, definition of six baseline engine cycles, reliability baseline (space shuttle main engine QRAS), and component level reliability/performance/cost for the six baseline cycles, and selection of 3 cycles for further study. This report further addresses technology improvement selection and component level reliability/performance/cost for the three cycles selected for further study, as well as risk reduction plans, and recommendation for future studies.

  16. Transient Current Analysis of Induction Generators for Wind Power Generating System

    NASA Astrophysics Data System (ADS)

    Senjyu, Tomonobu; Sueyoshi, Norihide; Uezato, Katsumi; Fujita, Hideki

    In recent year, non-conventional energy generation is coming up for effective use of natural energy, such as wind energy. Induction generators consisting squirrel-cage rotors are widly used as wind generators because of their salient features like robust rotor design, simple in the construction, maintenance free operation, etc. However these induction generators will draw large transient inrush current, several times as large as the machine rated current, the instant when they are connected to utility grid or restored after the fault clearance. Under such situations, there will be a severe voltage fluctuations in the power system. In this paper, we present transient analysis of induction generators before and after a three-phase fault conditions. Theoretical discission is developed to determine the initial phase angle and the time at which maximum transient currents flow in the system.

  17. Structure Theory for Extended Kepler-Coulomb 3D Classical Superintegrable Systems

    NASA Astrophysics Data System (ADS)

    Kalnins, Ernie G.; Miller, Willard, Jr.

    2012-06-01

    The classical Kepler-Coulomb system in 3 dimensions is well known to be 2nd order superintegrable, with a symmetry algebra that closes polynomially under Poisson brackets. This polynomial closure is typical for 2nd order superintegrable systems in 2D and for 2nd order systems in 3D with nondegenerate (4-parameter) potentials. However the degenerate 3-parameter potential for the 3D extended Kepler-Coulomb system (also 2nd order superintegrable) is an exception, as its quadratic symmetry algebra doesn't close polynomially. The 3D 4-parameter potential for the extended Kepler-Coulomb system is not even 2nd order superintegrable. However, Verrier and Evans (2008) showed it was 4th order superintegrable, and Tanoudis and Daskaloyannis (2011) showed that in the quantum case, if a second 4th order symmetry is added to the generators, the double commutators in the symmetry algebra close polynomially. Here, based on the Tremblay, Turbiner and Winternitz construction, we consider a! n infinite class of classical extended Kepler-Coulomb 3- and 4-parameter systems indexed by a pair of rational numbers (k1,k2) and reducing to the usual systems when k1=k2=1. We show these systems to be superintegrable of arbitrarily high order and work out explicitly the structure of the symmetry algebras determined by the 5 basis generators we have constructed. We demonstrate that the symmetry algebras close rationally; only for systems admitting extra discrete symmetries is polynomial closure achieved. Underlying the structure theory is the existence of raising and lowering constants of the motion, not themselves polynomials in the momenta, that can be employed to construct the polynomial symmetries and their structure relations.

  18. Next Generation Active Buffet Suppression System

    NASA Technical Reports Server (NTRS)

    Galea, Stephen C.; Ryall, Thomas G.; Henderson, Douglas A.; Moses, Robert W.; White, Edward V.; Zimcik, David G.

    2003-01-01

    Buffeting is an aeroelastic phenomenon that is common to high performance aircraft, especially those with twin vertical tails like the F/A-18, at high angles of attack. These loads result in significant random stresses, which may cause fatigue damage leading to restricted capabilities and availability of the aircraft. This paper describes an international collaborative research activity among Australia, Canada and the United States involving the use of active structural control to alleviate the damaging structural response to these loads. The research program is being co-ordinated by the Air Force Research Laboratory (AFRL) and is being conducted under the auspices of The Technical Cooperative Program (TTCP). This truly unique collaborative program has been developed to enable each participating country to contribute resources toward a program that coalesces a broad range of technical knowledge and expertise into a single investigation. This collaborative program is directed toward a full-scale test of an F/A-18 empennage, which is an extension of an earlier initial test. The current program aims at applying advanced directional piezoactuators, the aircraft rudder, switch mode amplifiers and advanced control strategies on a full-scale structure to demonstrate the enhanced performance and capability of the advanced active BLA control system in preparation for a flight test demonstration.

  19. BUILDOUT AND UPGRADE OF CENTRAL EMERGENCY GENERATOR SYSTEM, GENERATOR 3 AND 4 ELECTRICAL INSTALLATION

    SciTech Connect

    Gary D. Seifert; G. Shawn West; Kurt S. Myers; Jim Moncur

    2006-07-01

    SECTION 01000—SUMMARY OF WORK PART 1—GENERAL 1.1 SUMMARY The work to be performed under this project consists of providing the labor, equipment, and materials to perform "Buildout and Upgrade of Central Emergency Generator System, Generator 3 and 4 Electrical Installation" for the National Aeronautics and Space Administration at the Dryden Flight Research Center (NASA/DFRC), Edwards, California 93523. All modifications to existing substations and electrical distribution systems are the responsibility of the contractor. It is the contractor’s responsibility to supply a complete and functionally operational system. The work shall be performed in accordance with these specifications and the related drawings. The work of this project is defined by the plans and specifications contained and referenced herein. This work specifically includes but is not limited to the following: Scope of Work - Installation 1. Install all electrical wiring and controls for new generators 3 and 4 to match existing electrical installation for generators 1 and 2 and in accordance with drawings. Contractor shall provide as-built details for electrical installation. 2. Install battery charger systems for new generators 3 and 4 to match existing battery charging equipment and installation for generators 1 and 2. This may require exchange of some battery charger parts already on-hand. Supply power to new battery chargers from panel and breakers as shown on drawings. Utilize existing conduits already routed to generators 3 and 4 to field route the new wiring in the most reasonable way possible. 3. Install electrical wiring for fuel/lube systems for new generators 3 and 4 to match existing installation for generators 1 and 2. Supply power to lube oil heaters and fuel system (day tanks) from panel and breakers as shown on drawings. Utilize existing conduits already routed to generators 3 and 4 to field route the new wiring in the most reasonable way possible. Add any conduits necessary to

  20. Dispersed solar thermal generation employing parabolic dish-electric transport with field modulated generator systems

    NASA Technical Reports Server (NTRS)

    Ramakumar, R.; Bahrami, K.

    1981-01-01

    This paper discusses the application of field modulated generator systems (FMGS) to dispersed solar-thermal-electric generation from a parabolic dish field with electric transport. Each solar generation unit is rated at 15 kWe and the power generated by an array of such units is electrically collected for insertion into an existing utility grid. Such an approach appears to be most suitable when the heat engine rotational speeds are high (greater than 6000 r/min) and, in particular, if they are operated in the variable speed mode and if utility-grade a.c. is required for direct insertion into the grid without an intermediate electric energy storage and reconversion system. Predictions of overall efficiencies based on conservative efficiency figures for the FMGS are in the range of 25 per cent and should be encouraging to those involved in the development of cost-effective dispersed solar thermal power systems.

  1. High voltage pulse generators for use in laser systems

    SciTech Connect

    Dymoke-Bradshaw, A.K.L.; Hares, J.D.; Kellett, P.A.

    1995-12-31

    Solid state pulse generators with controlled multi-kilovolt outputs are now production items. The range of applications within the field of lasers has increased so that they can control laser pulse width and shape, cavity dumping and seeding, stage isolation and coherence reduction for smoothing irradiation. Such pulse generators can now be built with embedded computer systems for remote control, interrogation and diagnosis of pulser parameters. Diagnostic equipment to monitor laser beam profiles with respectable time resolution also employs these pulse generators.

  2. Order and disorder in Ca 2ND 0.90H 0.10-A structural and thermal study

    NASA Astrophysics Data System (ADS)

    Verbraeken, Maarten C.; Suard, Emmanuelle; Irvine, John T. S.

    2011-08-01

    The structure of calcium nitride hydride and its deuterided form has been re-examined at room temperature and studied at high temperature using neutron powder diffraction and thermal analysis. When synthesised at 600 °C, a mixture of both ordered and disordered Ca 2ND 0.90H 0.10 phases results. The disordered phase is the minor component and has a primitive rocksalt structure (spacegroup Fm3 m) with no ordering of D/N on the anion sites and the ordered phase is best described using the rhombohedral spacegroup R-3 m with D and N arranged in alternate layers in (111) planes. This mixture of ordered and disordered phases exists up to 580 °C, at which the loss of deuterium yields Ca 2ND 0.85 with the disappearance of the disordered phase. In the new ordered phase there exists a similar content of vacancies on both anion sites; to achieve this balance, a little N transfers onto the D site, whereas there is no indication of D transferring onto the N-sites. These observations are thought to indicate that the D/N ordering is difficult to achieve with fully occupied anion sites. It has previously been reported that Ca 2ND has an ordered cubic cell with alternating D and N sites in the [100] directions [1]; however, for the samples studied herein, there were clearly two coexisting phases with apparent broadening/splitting of the primitive peaks but not for the ordered peaks. The rhombohedral phase was in fact metrically cubic; however, all the observed peaks were consistent with the rhombohedral unit cell with no peaks requiring the larger ordered cubic unit cell to be utilised. Furthermore this rhombohedral cell displays the same form of N-D ordering as the Sr and Ba analogues, which are metrically rhombohedral.

  3. 2nd International Salzburg Conference on Neurorecovery (ISCN 2013) Salzburg/ Austria | November 28th - 29th, 2013

    PubMed Central

    Brainin, M; Muresanu, D; Slavoaca, D

    2014-01-01

    The 2nd International Salzburg Conference on Neurorecovery was held on the 28th and 29th of November, 2013, in Salzburg, one of the most beautiful cities in Austria, which is well known for its rich cultural heritage, world-famous music and beautiful surrounding landscapes. The aim of the conference was to discuss the progress in the field of neurorecovery. The conference brought together internationally renowned scientists and clinicians, who described the clinical and therapeutic relevance of translational research and its applications in neurorehabilitation. PMID:25713602

  4. [Combined Anterior and Posterior Surgical Approaches for Resection of a 2nd-rib Chondrosarcoma Occupying the Superior Sulcus].

    PubMed

    Shinohara, Yoshikazu; Anraku, Masaki; Saito, Noriyuki; Fukumoto, Kento; Kobayashi, Hiroshi; Shinoda, Yusuke; Chikuda, Hirotaka; Nakajima, Jun

    2016-06-01

    A 77-year-old man with right chest wall chondrosarcoma invading vertebral bodies underwent resection. Computed tomography (CT) showed that the tumor occupied the right superior sulcus, and was close to mediastinal organs including the trachea and esophagus. We adopted a combined anterior and posterior approaches that made safe and curative resection possible. In the anterior approach, we dissected and mobilized the neurovascular structures and neighboring organs from the tumor. A-4 cm gutter on the ventral side of the 1st, 2nd, and 3rd thoracic vertebral bodies was created for safe resection. By the subsequent posterior approach, successful resection was achieved without violating tumor margins. PMID:27246126

  5. THE 2nd SCHIZOPHRENIA INTERNATIONAL RESEARCH SOCIETY CONFERENCE, 10–14 APRIL 2010, FLORENCE, ITALY: SUMMARIES OF ORAL SESSIONS

    PubMed Central

    Baharnoori, Moogeh; Bartholomeusz, Cali; Boucher, Aurelie A.; Buchy, Lisa; Chaddock, Christopher; Chiliza, Bonga; Föcking, Melanie; Fornito, Alex; Gallego, Juan A.; Hori, Hiroaki; Huf, Gisele; Jabbar, Gul A.; Kang, Shi Hyun; El Kissi, Yousri; Merchán-Naranjo, Jessica; Modinos, Gemma; Abdel-Fadeel, Nashaat A.M.; Neubeck, Anna-Karin; Ng, Hsiao Piau; Novak, Gabriela; Owolabi, Olasunmbo.O.; Prata, Diana P.; Rao, Naren P.; Riecansky, Igor; Smith, Darryl C.; Souza, Renan P.; Thienel, Renate; Trotman, Hanan D.; Uchida, Hiroyuki; Woodberry, Kristen A.; O'Shea, Anne; DeLisi, Lynn E.

    2014-01-01

    The 2nd Schizophrenia International Research Society Conference, was held in Florence, Italy, April 10–15, 2010. Student travel awardees served as rapporteurs of each oral session and focused their summaries on the most significant findings that emerged from each session and the discussions that followed. The following report is a composite of these reviews. It is hoped that it will provide an overview for those who were present, but could not participate in all sessions, and those who did not have the opportunity to attend, but who would be interested in an update on current investigations ongoing in the field of schizophrenia research. PMID:20934307

  6. Quantitative metabolic profiles of 2nd and 3rd trimester human amniotic fluid using 1H HR-MAS spectroscopy

    PubMed Central

    Cohn, Brad R.; Zhao, Shoujun; Kornak, John; Zhang, Vickie Y.; Iman, Rahwa; Kurhanewicz, John; Vahidi, Kiarash; Yu, Jingwei; Caughey, Aaron B.; Swanson, Mark G.

    2016-01-01

    Object To establish and compare normative metabolite concentrations in 2nd and 3rd trimester human amniotic fluid samples in an effort to reveal metabolic biomarkers of fetal health and development. Materials and methods Twenty-one metabolite concentrations were compared between 2nd (15–27 weeks gestation, N = 23) and 3rd (29–39 weeks gestation, N = 27) trimester amniotic fluid samples using 1H high resolution magic angle spinning (HR-MAS) spectroscopy. Data were acquired using the electronic reference to access in vivo concentrations method and quantified using a modified semi-parametric quantum estimation algorithm modified for high-resolution ex vivo data. Results Sixteen of 21 metabolite concentrations differed significantly between 2nd and 3rd trimester groups. Betaine (0.00846±0.00206 mmol/kg vs. 0.0133±0.0058 mmol/kg, P <0.002) and creatinine (0.0124±0.0058 mmol/kg vs. 0.247±0.011 mmol/kg, P <0.001) concentrations increased significantly, while glucose (5.96±1.66 mmol/kg vs. 2.41±1.69 mmol/kg, P <0.001), citrate (0.740±0.217 mmol/kg vs. 0.399±0.137 mmol/kg, P <0.001), pyruvate (0.0659±0.0103 mmol/kg vs. 0.0299±0.286 mmol/kg, P <0.001), and numerous amino acid (e.g. alanine, glutamate, isoleucine, leucine, lysine, and valine) concentrations decreased significantly with advancing gestation. A stepwise multiple linear regression model applied to 50 samples showed that gestational age can be accurately predicted using combinations of alanine, glucose and creatinine concentrations. Conclusion These results provide key normative data for 2nd and 3rd trimester amniotic fluid metabolite concentrations and provide the foundation for future development of magnetic resonance spectroscopy (MRS) biomarkers to evaluate fetal health and development. PMID:19779747

  7. Roadmap for Next-Generation State Accountability Systems. Second Edition

    ERIC Educational Resources Information Center

    Council of Chief State School Officers, 2011

    2011-01-01

    This Roadmap, developed by the Council of Chief State School Officers (CCSSO) Next-Generation State Accountability Taskforce, presents a vision for next-generation accountability systems to support college and career readiness for all students. It is written by and for states, building on the leadership toward college and career readiness. This…

  8. A power conditioning system for radioisotope thermoelectric generator energy sources

    NASA Technical Reports Server (NTRS)

    Gillis, J. A., Jr.

    1974-01-01

    The use of radioisotope thermoelectric generators (RTG) as the primary source of energy in unmanned spacecraft is discussed. RTG output control, power conditioning system requirements, the electrical design, and circuit performance are also discussed.

  9. Brain order disorder 2nd group report of f-EEG

    NASA Astrophysics Data System (ADS)

    Lalonde, Francois; Gogtay, Nitin; Giedd, Jay; Vydelingum, Nadarajen; Brown, David; Tran, Binh Q.; Hsu, Charles; Hsu, Ming-Kai; Cha, Jae; Jenkins, Jeffrey; Ma, Lien; Willey, Jefferson; Wu, Jerry; Oh, Kenneth; Landa, Joseph; Lin, C. T.; Jung, T. P.; Makeig, Scott; Morabito, Carlo Francesco; Moon, Qyu; Yamakawa, Takeshi; Lee, Soo-Young; Lee, Jong-Hwan; Szu, Harold H.; Kaur, Balvinder; Byrd, Kenneth; Dang, Karen; Krzywicki, Alan; Familoni, Babajide O.; Larson, Louis; Harkrider, Susan; Krapels, Keith A.; Dai, Liyi

    2014-05-01

    Since the Brain Order Disorder (BOD) group reported on a high density Electroencephalogram (EEG) to capture the neuronal information using EEG to wirelessly interface with a Smartphone [1,2], a larger BOD group has been assembled, including the Obama BRAIN program, CUA Brain Computer Interface Lab and the UCSD Swartz Computational Neuroscience Center. We can implement the pair-electrodes correlation functions in order to operate in a real time daily environment, which is of the computation complexity of O(N3) for N=102~3 known as functional f-EEG. The daily monitoring requires two areas of focus. Area #(1) to quantify the neuronal information flow under arbitrary daily stimuli-response sources. Approach to #1: (i) We have asserted that the sources contained in the EEG signals may be discovered by an unsupervised learning neural network called blind sources separation (BSS) of independent entropy components, based on the irreversible Boltzmann cellular thermodynamics(ΔS < 0), where the entropy is a degree of uniformity. What is the entropy? Loosely speaking, sand on the beach is more uniform at a higher entropy value than the rocks composing a mountain - the internal binding energy tells the paleontologists the existence of information. To a politician, landside voting results has only the winning information but more entropy, while a non-uniform voting distribution record has more information. For the human's effortless brain at constant temperature, we can solve the minimum of Helmholtz free energy (H = E - TS) by computing BSS, and then their pairwise-entropy source correlation function. (i) Although the entropy itself is not the information per se, but the concurrence of the entropy sources is the information flow as a functional-EEG, sketched in this 2nd BOD report. Area #(2) applying EEG bio-feedback will improve collective decision making (TBD). Approach to #2: We introduce a novel performance quality metrics, in terms of the throughput rate of faster (

  10. An extremum-seeking MHD generator channel flow control system

    SciTech Connect

    Vasil`ev, V.V.

    1995-01-01

    Progress in the development and study of new electric energy generation methods, based on direct conversion of heat energy, raises the problem of more effective use of their power characteristics. A self-optimizing control system for an object with a unimodal quality function has been developed. The system consists of the object, a divider, a band-pass filter, an averaging filter, a multiplier, a final control element, an adder, and a search signal generator.

  11. Cold weather hydrogen generation system and method of operation

    DOEpatents

    Dreier, Ken Wayne; Kowalski, Michael Thomas; Porter, Stephen Charles; Chow, Oscar Ken; Borland, Nicholas Paul; Goyette, Stephen Arthur

    2010-12-14

    A system for providing hydrogen gas is provided. The system includes a hydrogen generator that produces gas from water. One or more heat generation devices are arranged to provide heating of the enclosure during different modes of operation to prevent freezing of components. A plurality of temperature sensors are arranged and coupled to a controller to selectively activate a heat source if the temperature of the component is less than a predetermined temperature.

  12. Network generation and analysis of complex biomass conversion systems

    SciTech Connect

    Rangarajan, S.; Kaminski, T.; Van Wyk, E.; Bhan, A.; Daoutidis, P.

    2011-01-01

    A modular computational tool for automated generation and rule-based post-processing of reaction systems in biomass conversion is presented. Cheminformatics and graph theory algorithms are used to generate chemical transformations pertaining to heterogeneous and homogeneous chemistries in the automated rule-based network generator. A domain-specific language provides a user-friendly English-like chemistry specification interface to the network generator. A rule-based pathway analysis module enables the user to extract and query pathways from the reaction network. A demonstration of the features of this tool is presented using Fructose to 5-Hydroxymethylfurfural as a case study.

  13. Welfare and Generational Equity in Sustainable Unfunded Pension Systems

    PubMed Central

    Auerbach, Alan J.; Lee, Ronald

    2011-01-01

    Using stochastic simulations we analyze how public pension structures spread the risks arising from demographic and economic shocks across generations. We consider several actual and hypothetical sustainable PAYGO pension structures, including: (1) versions of the US Social Security system with annual adjustments of taxes or benefits to maintain fiscal balance; (2) Sweden’s Notional Defined Contribution system and several variants developed to improve fiscal stability; and (3) the German system, which also includes annual adjustments to maintain fiscal balance. For each system, we present descriptive measures of uncertainty in representative outcomes for a typical generation and across generations. We then estimate expected utility for generations based on simplifying assumptions and incorporate these expected utility calculations in an overall social welfare measure. Using a horizontal equity index, we also compare the different systems’ performance in terms of how neighboring generations are treated. While the actual Swedish system smoothes stochastic fluctuations more than any other and produces the highest degree of horizontal equity, it does so by accumulating a buffer stock of assets that alleviates the need for frequent adjustments. In terms of social welfare, this accumulation of assets leads to a lower average rate of return that more than offsets the benefits of risk reduction, leaving systems with more frequent adjustments that spread risks broadly among generations as those most preferred. PMID:21818166

  14. Time generation and distribution system for a military national synchronization

    NASA Astrophysics Data System (ADS)

    Mourier, V.

    1992-06-01

    The requirements, concept, and principle of a French air force time generation and distribution system are presented. The system provides homogeneous dating of events throughout the country. It generates and distributes time codes and precise frequency used for high precision measurements, telecommunications, etc. Accordingly the need is to provide on each operational site an accurate and stable time reference based on UTC time scale. The system consists of a common reference (GPS (Global Positioning System)) independent clocks and time distribution that provides time to all the user equipment on each operational site.

  15. Density functional theory calculations on the active site of biotin synthase: mechanism of S transfer from the Fe(2)S(2) cluster and the role of 1st and 2nd sphere residues.

    PubMed

    Rana, Atanu; Dey, Subal; Agrawal, Amita; Dey, Abhishek

    2015-10-01

    Density functional theory (DFT) calculations are performed on the active site of biotin synthase (BS) to investigate the sulfur transfer from the Fe(2)S(2) cluster to dethiobiotin (DTB). The active site is modeled to include both the 1st and 2nd sphere residues. Molecular orbital theory considerations and calculation on smaller models indicate that only an S atom (not S²⁻) transfer from an oxidized Fe(2)S(2) cluster leads to the formation of biotin from the DTB using two adenosyl radicals generated from S-adenosyl-L-methionine. The calculations on larger protein active site model indicate that a 9-monothiobiotin bound reduced cluster should be an intermediate during the S atom insertion from the Fe(2)S(2) cluster consistent with experimental data. The Arg260 bound to Fe1, being a weaker donor than cysteine bound to Fe(2), determines the geometry and the electronic structure of this intermediate. The formation of this intermediate containing the C9-S bond is estimated to have a ΔG(≠) of 17.1 kcal/mol while its decay by the formation of the 2nd C6-S bond is calculated to have a ΔG(≠) of 29.8 kcal/mol, i.e. the 2nd C-S bond formation is calculated to be the rate determining step in the cycle and it leads to the decay of the Fe(2)S(2) cluster. Significant configuration interaction (CI), present in these transition states, helps lower the barrier of these reactions by ~30-25 kcal/mol relative to a hypothetical outer-sphere reaction. The conserved Phe285 residue near the Fe(2)S(2) active site determines the stereo selectivity at the C6 center of this radical coupling reaction. Reaction mechanism of BS investigated using DFT calculations. Strong CI and the Phe285 residue control the kinetic rate and stereochemistry of the product. PMID:26369537

  16. Development of China Hydrogeology Exploring Techniques in 30 Years --Comparison of Handbook of Hydrogeology of 1st and 2nd Edition

    NASA Astrophysics Data System (ADS)

    Tong, Y.

    2013-12-01

    Handbook of Hydrogeology (2nd edition) is supported by one program from China Geological Survey (CGS): Research of Technical Methods of Hydrogeological Survey and Revision of Handbook of Hydrogeology. It is a reference book for those who are engaged in hydrogeological survey and research in China and covers fundamental principles, theories, survey and exploring techniques, and traditional experiences and achievements in hydrogeology. By comparing the 1st (1978) and 2nd (2012) edition of Handbook of Hydrogeology (in Chinese), this paper analyses the development of China hydrogeological survey and exploring techniques in last 30 years, especially the great change and progress in survey techniques of hydro-remote sensing and hydro-geophysical prospecting. In the first edition of Handbook of Hydrogeology, hydro-remote sensing was only mentioned as an interpretation of aerial pictures in a hydrogeological way, but had not yet formed an independent system and discipline. In the second edition, hydro-remote sensing is an important and independent chapter as one of the hydrogeological techniques. In it, various survey techniques of hydro-remote sensing and types and features of remote sensing data are classified. General systems of interpretation marks of remote sensing images are established, including marks of landform and Quaternary sediment, bedrock, structure types, water yield property, environmental elements of hydrogeology, aquifer group and so on. Systematic workflow is constructed, esp. in remote sensing images mapping and interpreting techniques. GPS and GIS are integrated into remote sensing. Remote sensing exploring instruments and interpreting softwares are also introduced and classified. Although hydro-geophysical prospecting, in the first edition of Handbook of Hydrogeology, was one independent chapter, there were only 10 exploring techniques. Equipments and instruments were simple and lagged in comparison to those in the second edition. The precision and

  17. Proceedings of the 2nd Annual Conference on NASA/University Advanced Space Design Program

    NASA Technical Reports Server (NTRS)

    1986-01-01

    Topics discussed include: lunar transportation system, Mars rover, lunar fiberglass production, geosynchronous space stations, regenerative system for growing plants, lunar mining devices, lunar oxygen transporation system, mobile remote manipulator system, Mars exploration, launch/landing facility for a lunar base, and multi-megawatt nuclear power system.

  18. Influence of Nd dopant amount on microstructure and photoluminescence of TiO2:Nd thin films

    NASA Astrophysics Data System (ADS)

    Wojcieszak, Damian; Mazur, Michal; Kaczmarek, Danuta; Morgiel, Jerzy; Zatryb, Grzegorz; Domaradzki, Jaroslaw; Misiewicz, Jan

    2015-10-01

    TiO2 and TiO2:Nd thin films were deposited using reactive magnetron sputtering process from mosaic Ti-Nd targets with various Nd concentration. The thin films were characterized using X-ray diffraction (XRD), transmission electron microscopy (TEM) and spectroscopic techniques. Photoluminescence (PL) in the near infrared obtained upon 514.5 nm excitation was also examined. The relationship between the Nd concentration, structural, optical and photoluminescence properties of prepared thin films was investigated and discussed. XRD and TEM measurements showed that an increase in the Nd concentration in the thin films hinders the crystal growth in the deposited coatings. Depending on the Nd amount in the thin films, TiO2 with the rutile, mixed rutile-amorphous or amorphous phase was obtained. Transmittance measurements revealed that addition of Nd dopant to titania matrix did not deteriorate optical transparency of the coatings, however it influenced on the position of the fundamental absorption edge and therefore on the width of optical band gap energy. All TiO2:Nd thin films exhibited PL emission that occurred at ca. 0.91, 1.09 and 1.38 μm. Finally, results obtained for deposited coatings showed that titania with the rutile structure and 1.0 at.% of Nd was the most efficient in VIS to NIR photon conversion.

  19. Surface-emitting quantum cascade laser with 2nd-order metal-semiconductor gratings for single-lobe emission

    NASA Astrophysics Data System (ADS)

    Boyle, C.; Sigler, C.; Kirch, J. D.; Lindberg, D.; Earles, T.; Botez, D.; Mawst, L. J.

    2016-03-01

    Grating-coupled, surface-emitting (GCSE) quantum-cascade lasers (QCLs) are demonstrated with high-power, single-lobe surface emission. A 2nd-order Au-semiconductor distributed-feedback (DFB)/ distributed-Bragg-reflector (DBR) grating is used for feedback and out-coupling. The DFB and DBR grating regions are 2.55 mm- and 1.28 mm-long, respectively, for a total grating length of 5.1 mm. The lasers are designed to operate in a symmetric longitudinal mode by causing resonant coupling of the guided optical mode to the antisymmetric surface-plasmon modes of the 2nd-order metal/semiconductor grating. In turn, the antisymmetric longitudinal modes are strongly absorbed by the metal in the grating, causing the symmetric longitudinal mode to be favored to lase, which produces a single lobe beam over a grating duty-cycle range of 36-41 %. Simulations indicate that the symmetric mode is always favored to lase, independent of the random phase of residual reflections from the device's cleaved ends. Peak pulsed output powers of ~ 0.4 W were measured with single-lobe, single-mode operation near 4.75 μm.

  20. A third generation mobile high energy radiography system

    SciTech Connect

    Fry, D.A.; Valdez, J.E.; Johnson, C.S.; Kimerly, H.J.; Vananne, J.R.

    1997-12-01

    A third generation mobile high energy radiographic capability has been completed and put into service by the Los Alamos National Laboratory. The system includes a 6 MeV linac x-ray generator, Co-60 gamma source, all-terrain transportation, on-board power, real-time radiography (RTR), a control center, and a complete darkroom capability. The latest version includes upgraded and enhanced portability, flexibility, all-terrain operation, all-weather operation, and ease of use features learned from experience with the first and second generation systems. All systems were required to have the following characteristics; all-terrain, all-weather operation, self-powered, USAF airlift compatible, reliable, simple to setup, easy to operate, and all components two-person portable. The systems have met these characteristics to differing degrees, as is discussed in the following section, with the latest system being the most capable.

  1. XUV spectra of 2nd transition row elements: identification of 3d-4p and 3d-4f transition arrays

    NASA Astrophysics Data System (ADS)

    Lokasani, Ragava; Long, Elaine; Maguire, Oisin; Sheridan, Paul; Hayden, Patrick; O'Reilly, Fergal; Dunne, Padraig; Sokell, Emma; Endo, Akira; Limpouch, Jiri; O'Sullivan, Gerry

    2015-12-01

    The use of laser produced plasmas (LPPs) in extreme ultraviolet/soft x-ray lithography and metrology at 13.5 nm has been widely reported and recent research efforts have focused on developing next generation sources for lithography, surface morphology, patterning and microscopy at shorter wavelengths. In this paper, the spectra emitted from LPPs of the 2nd transition row elements from yttrium (Z = 39) to palladium (Z = 46), with the exception of zirconium (Z = 40) and technetium (Z = 43), produced by two Nd:YAG lasers which delivered up to 600 mJ in 7 ns and 230 mJ in 170 ps, respectively, are reported. Intense emission was observed in the 2-8 nm spectral region resulting from unresolved transition arrays (UTAs) due to 3d-4p, 3d-4f and 3p-3d transitions. These transitions in a number of ion stages of yttrium, niobium, ruthenium and rhodium were identified by comparison with results from Cowan code calculations and previous studies. The theoretical data were parameterized using the UTA formalism and the mean wavelength and widths were calculated and compared with experimental results.

  2. Experimental Investigation and Modeling of Integrated Tri-generation Systems

    NASA Astrophysics Data System (ADS)

    Cetinkaya, Eda

    Energy demand in the world is increasing with population growth and higher living standards. Today, the need for energy requires a focus on renewable sources without abandoning fossil fuels. Efficient use of energy is one of the most important tasks in modern energy systems to achieve. In addition to the energy need, growing environmental concerns are linked with energy is emerged. Multi-purpose energy generation allows a higher efficiency by generating more outputs with the same input in the same system. Tri-generation systems are expected to provide at least three commodities, such as heating, cooling, desalination, storable fuel production and some other useful outputs, in addition to power generation. In this study, an experimental investigation of gasification is presented and two integrated tri-generation systems are proposed. The first integrated tri-generation system (System 1) utilizes solar energy as input and the outputs are power, fresh water and hot water. It consists of four sub-systems, namely solar power tower system, desalination system, Rankine cycle and organic Rankine cycle (ORC). The second integrated tri-generation system (System 2) utilizes coal and biomass as input and the outputs are power, fuel and hot water. It consists of five sub-systems: gasification plant, Brayton cycle, Rankine cycle, Fischer-Tropsch synthesis plant and an organic Rankine cycle (ORC). Experimental investigation includes coal and biomass gasification, where the experimental results of synthesis gas compositions are utilized in the analysis of the second systems. To maximize efficiency, heat losses from the system should be minimized through a recovery system to make the heat a useful commodity for other systems, such as ORCs which can utilize the low-grade heat. In this respect, ORCs are first analyzed for three different configurations in terms of energy and exergy efficiencies altering working fluids to increase the power output. Among two types of coal and one type

  3. The next generation of oxy-fuel boiler systems

    SciTech Connect

    Ochs, Thomas L.; Gross, Alex; Patrick, Brian; Oryshchyn, Danylo B.; Summers, Cathy A.; Turner, Paul C.

    2005-01-01

    Research in the area of oxy-fuel combustion which is being pioneered by Jupiter Oxygen Corporation combined with boiler research conducted by the USDOE/Albany Research Center has been applied to designing the next generation of oxy-fuel combustion systems. The new systems will enhance control of boiler systems during turn-down and improve response time while improving boiler efficiency. These next generation boiler systems produce a combustion product that has been shown to be well suited for integrated pollutant removal. These systems have the promise of reducing boiler foot-print and boiler construction costs. The modularity of the system opens the possibility of using this design for replacement of boilers for retrofit on existing systems.

  4. Ariadne: The Next Generation of Electronic Document Delivery Systems.

    ERIC Educational Resources Information Center

    Roes, Hans; Dijkstra, Joost

    1994-01-01

    Describes an approach to electronic document delivery which has evolved at Tilburg University (Netherlands), leading to the development of a system called Ariadne. Highlights include various generations of electronic document delivery systems; standards, including the work of the Group on Electronic Document Interchange; and a description of the…

  5. Automatic Thesaurus Generation for an Electronic Community System.

    ERIC Educational Resources Information Center

    Chen, Hsinchun; And Others

    1995-01-01

    This research reports an algorithmic approach to the automatic generation of thesauri for electronic community systems. The techniques used include term filtering, automatic indexing, and cluster analysis. The Worm Community System, used by molecular biologists studying the nematode worm C. elegans, was used as the testbed for this research.…

  6. Road electric generation system with use of solar power

    SciTech Connect

    Meiarashi, S.; Ohara, Toshimasa

    1997-09-01

    The temperature of road pavement surface becomes more than 70 C because of the solar power in summer. The characteristics of asphalt pavement on heat transfer and the relatively huge occupation with urban area have caused the heat-island phenomena. The phenomena increase the temperature and the energy consumption for conditioners. Road administrators have to keep the road pavement surface out of freezing in winter. For the purpose, the use of dusting powder becomes popular in recent days. However, the negative influence of the huge amount of the powder could not be ignored, for instance, corrosion of steel bridge and cars, water pollution, and soil pollution. Another way is a road heating system. The enormous electric energy consumption prevents the system from becoming popular. The authors have devised the new system that generates electric power and works as a road heating system. The authors call the system as ``Road Electric Generation System (REGS).`` The basic principal of the electric generation and road heating is Seebeck and Pertier effect, respectively. In this paper, the authors have calculated the electric power generated by the system, road surface temperature after introducing the system, and the heat radiation from the road surface.

  7. SCOS2: ESA's new generation of mission control systems

    NASA Technical Reports Server (NTRS)

    Kaufeler, J. F.; Head, N. C.

    1993-01-01

    The paper describes the next generation Spacecraft Control System infrastructure (SCOSII) which is being developed at the Operations Centre (ESOC) of the European Space Agency (ESA). The objectives of the new system and selected areas of the proposed hardware and software approach are described.

  8. New Generation System. "An Interstate Information Network Serving America's Children."

    ERIC Educational Resources Information Center

    Texas A and I Univ., Kingsville.

    The New Generation System (NGS) is a computer network developed to transfer academic records of migrant students. NGS was developed as a result of the phasing out of the Migrant Student Record Transfer System. NGS is backed by a 29-state consortium that uses the Internet to transfer records because of its speed, availability, and…

  9. Single module pressurized fuel cell turbine generator system

    DOEpatents

    George, Raymond A.; Veyo, Stephen E.; Dederer, Jeffrey T.

    2001-01-01

    A pressurized fuel cell system (10), operates within a common pressure vessel (12) where the system contains fuel cells (22), a turbine (26) and a generator (98) where preferably, associated oxidant inlet valve (52), fuel inlet valve (56) and fuel cell exhaust valve (42) are outside the pressure vessel.

  10. Laser systems for the generation of sodium layer guide stars

    SciTech Connect

    Friedman, H.; Erbert, G.; Kuklo, T.; Salmon, T.; Thompson, G.; Wong, N.; Malik, J.

    1996-03-05

    Laser generated guide stars in the mesosphere at 90 km provide an effective beacon for adaptive optics schemes which compensate the effects of atmospheric turbulence. This report discusses the attributes of the laser systems which are desirable from a point of view of overall adaptive optics system performance and operation ease.

  11. Second generation thermal imaging system design trades modeling

    NASA Astrophysics Data System (ADS)

    Vroombout, Leo O.

    1990-10-01

    The Night Vision Laboratory static performance model is considered for thermal viewing systems. Since the model is not initially intended to be a design tool and is not usable for conducting system or component design trades, it has to be restructured. The approach to updating the first-generation static performance model and to configuring it as a design tool is presented. Second-generation imaging systems exploit infrared focal-plane arrays, high-reliability cryogenic coolers, precision scanning devices, and high-speed digital electronics. They also use optical materials and coatings and optomechanical and electronics packaging techniques.

  12. Practical system for generating digital mixed reality video holograms.

    PubMed

    Song, Joongseok; Kim, Changseob; Park, Hanhoon; Park, Jong-Il

    2016-07-10

    We propose a practical system that can effectively mix the depth data of real and virtual objects by using a Z buffer and can quickly generate digital mixed reality video holograms by using multiple graphic processing units (GPUs). In an experiment, we verify that real objects and virtual objects can be merged naturally in free viewing angles, and the occlusion problem is well handled. Furthermore, we demonstrate that the proposed system can generate mixed reality video holograms at 7.6 frames per second. Finally, the system performance is objectively verified by users' subjective evaluations. PMID:27409312

  13. Mathematical modeling of control system for the experimental steam generator

    NASA Astrophysics Data System (ADS)

    Podlasek, Szymon; Lalik, Krzysztof; Filipowicz, Mariusz; Sornek, Krzysztof; Kupski, Robert; Raś, Anita

    2016-03-01

    A steam generator is an essential unit of each cogeneration system using steam machines. Currently one of the cheapest ways of the steam generation can be application of old steam generators came from army surplus store. They have relatively simple construction and in case of not so exploited units - quite good general conditions, and functionality of mechanical components. By contrast, electrical components and control systems (mostly based on relay automatics) are definitely obsolete. It is not possible to use such units with cooperation of steam bus or with steam engines. In particular, there is no possibility for automatically adjustment of the pressure and the temperature of the generated steam supplying steam engines. Such adjustment is necessary in case of variation of a generator load. The paper is devoted to description of improvement of an exemplary unit together with construction of the measurement-control system based on a PLC. The aim was to enable for communication between the steam generator and controllers of the steam bus and steam engines in order to construction of a complete, fully autonomic and maintenance-free microcogeneration system.

  14. Automatic generation of fuzzy inference systems via unsupervised learning.

    PubMed

    Er, Meng Joo; Zhou, Yi

    2008-12-01

    In this paper, a novel approach termed Enhanced Dynamic Self-Generated Fuzzy Q-Learning (EDSGFQL) for automatically generating Fuzzy Inference Systems (FISs) is presented. In the EDSGFQL approach, structure identification and parameter estimations of FISs are achieved via Unsupervised Learning (UL) (including Reinforcement Learning (RL)). Instead of using Supervised Learning (SL), UL clustering methods are adopted for input space clustering when generating FISs. At the same time, structure and preconditioning parts of a FIS are generated in a RL manner in that fuzzy rules are adjusted and deleted according to reinforcement signals. The proposed EDSGFQL methodologies can automatically create, delete and adjust fuzzy rules dynamically. Simulation studies on wall-following and obstacle avoidance tasks by a mobile robot show that the proposed approach is superior in generating efficient FISs. PMID:18653313

  15. Literacy: The Key to Success. A Literacy Handbook, 2nd Edition.

    ERIC Educational Resources Information Center

    Mid-York Library System, Utica, NY.

    Designed to provide a comprehensive literacy reference for public libraries, this handbook presents a glossary of terms, background information on functional literacy, and brief reviews of 14 additional topics: (1) literacy statistics; (2) adult performance levels; (3) the problem of adult education; (4) illiteracy generates itself; (5) about…

  16. Solid Oxide Fuel Cell Hybrid System for Distributed Power Generation

    SciTech Connect

    David Deangelis; Rich Depuy; Debashis Dey; Georgia Karvountzi; Nguyen Minh; Max Peter; Faress Rahman; Pavel Sokolov; Deliang Yang

    2004-09-30

    This report summarizes the work performed by Hybrid Power Generation Systems, LLC (HPGS) during the April to October 2004 reporting period in Task 2.3 (SOFC Scaleup for Hybrid and Fuel Cell Systems) under Cooperative Agreement DE-FC26-01NT40779 for the U. S. Department of Energy, National Energy Technology Laboratory (DOE/NETL), entitled ''Solid Oxide Fuel Cell Hybrid System for Distributed Power Generation''. This study analyzes the performance and economics of power generation systems for central power generation application based on Solid Oxide Fuel Cell (SOFC) technology and fueled by natural gas. The main objective of this task is to develop credible scale up strategies for large solid oxide fuel cell-gas turbine systems. System concepts that integrate a SOFC with a gas turbine were developed and analyzed for plant sizes in excess of 20 MW. A 25 MW plant configuration was selected with projected system efficiency of over 65% and a factory cost of under $400/kW. The plant design is modular and can be scaled to both higher and lower plant power ratings. Technology gaps and required engineering development efforts were identified and evaluated.

  17. System and method for key generation in security tokens

    DOEpatents

    Evans, Philip G.; Humble, Travis S.; Paul, Nathanael R.; Pooser, Raphael C.; Prowell, Stacy J.

    2015-10-27

    Functional randomness in security tokens (FRIST) may achieve improved security in two-factor authentication hardware tokens by improving on the algorithms used to securely generate random data. A system and method in one embodiment according to the present invention may allow for security of a token based on storage cost and computational security. This approach may enable communication where security is no longer based solely on onetime pads (OTPs) generated from a single cryptographic function (e.g., SHA-256).

  18. High temperature VSCF (Variable Speed Constant Frequency) generator system

    NASA Astrophysics Data System (ADS)

    Maphet, Thomas Allen; McCabria, Jack Lee; Kouba, Carroll Charles; Mitchell, James Thomas; Kwiecinski, James Robert

    1989-04-01

    The high temperature VSCF generator program was designed to develop a generating system capable of withstanding constantly high oil-in temperatures of 200 C in an ambient environment of 200 C. This is a requirement due to anticipated new fighter aircraft designs that will not be capable of cooling the oil to 100 C as in today's designs due to size restrictions of the heat exchanger and/or extended operation of the aircraft at supersonic speeds. The generator uses composite material to withstand the constant use of 200 C inlet oil.

  19. The Geostationary Operational Environmental Satellite (GOES) Product Generation System

    NASA Technical Reports Server (NTRS)

    Haines, S. L.; Suggs, R. J.; Jedlovec, G. J.

    2004-01-01

    The Geostationary Operational Environmental Satellite (GOES) Product Generation System (GPGS) is introduced and described. GPGS is a set of computer programs developed and maintained at the Global Hydrology and Climate Center and is designed to generate meteorological data products using visible and infrared measurements from the GOES-East Imager and Sounder instruments. The products that are produced by GPGS are skin temperature, total precipitable water, cloud top pressure, cloud albedo, surface albedo, and surface insolation. A robust cloud mask is also generated. The retrieval methodology for each product is described to include algorithm descriptions and required inputs and outputs for the programs. Validation is supplied where applicable.

  20. Attenuating noise generated by variable-air-volume systems

    SciTech Connect

    Stokes, R.

    1985-03-01

    Sound generated by HVAC systems is receiving much attention because they are generally the principal contributors to room background sound levels that may become irritating and distracting noise if not controlled. This article discusses the creation of a quiet working environment through an analysis of the three traditional sound paths associated with air handling systems: radiated sound, inlet or return air sound and discharge sound. Recommended standards are given as well as a brief overview of materials used to fabricate HVAC system components.

  1. Feasibility demonstration of a second-generation electronic monitoring system

    NASA Astrophysics Data System (ADS)

    Murphy, John H.

    1997-02-01

    First generation electronic monitoring systems are being used by the criminal justice system to effect behavioral modifications of persons in pre-trial release programs, on parole, and on probation. Current systems are merely radio frequency proximity detection systems that operate over limited ranges, on the order of 45 to 70 meters. One major defect with proximity detection systems is that when the offenders leave the area being monitored, there is no way to ensure that the offenders travel where they should. As a result, the first generation electronic monitoring systems are only applied to a restricted number of low risk cases. There is a growing need for a second generation electronic monitoring system which utilizes community-wide tracking and location technologies to increase the public safety and to expand the number of offenders monitored by these systems. Even though GPS (Global Positioning System) is rapidly becoming the technology of choice for vehicle tracking and location, GPS is not an ideal candidate for the second generation electronic monitoring system. Urban environments prevent GPS systems from providing continuous and accurate location service due to satellite occlusion by obstacles such as: hills, mountains, vehicles, buildings, and trees. An inverse-GPS approach which overcomes these urban environment related limitations has been evaluated by Northrop Grumman as a means to track people. This paper presents the results of a National Institute of Justice funded program to demonstrate in downtown Pittsburgh the feasibility of spread spectrum based time-of-arrival location systems for intelligently tracking people on probation and parole.

  2. Generating target system specifications from a domain model using CLIPS

    NASA Technical Reports Server (NTRS)

    Sugumaran, Vijayan; Gomaa, Hassan; Kerschberg, Larry

    1991-01-01

    The quest for reuse in software engineering is still being pursued and researchers are actively investigating the domain modeling approach to software construction. There are several domain modeling efforts reported in the literature and they all agree that the components that are generated from domain modeling are more conducive to reuse. Once a domain model is created, several target systems can be generated by tailoring the domain model or by evolving the domain model and then tailoring it according to the specified requirements. This paper presents the Evolutionary Domain Life Cycle (EDLC) paradigm in which a domain model is created using multiple views, namely, aggregation hierarchy, generalization/specialization hierarchies, object communication diagrams and state transition diagrams. The architecture of the Knowledge Based Requirements Elicitation Tool (KBRET) which is used to generate target system specifications is also presented. The preliminary version of KBRET is implemented in the C Language Integrated Production System (CLIPS).

  3. Development of large wind energy power generation system

    NASA Technical Reports Server (NTRS)

    1985-01-01

    The background and development of an experimental 100 kW wind-energy generation system are described, and the results of current field tests are presented. The experimental wind turbine is a two-bladed down-wind horizontal axis propeller type with a 29.4 m diameter rotor and a tower 28 m in height. The plant was completed in March, 1983, and has been undergoing trouble-free tests since then. The present program calls for field tests during two years from fiscal 1983 to 1984. The development of technologies relating to the linkage and operation of wind-energy power generation system networks is planned along with the acquisition of basic data for the development of a large-scale wind energy power generation system.

  4. Compact pulsed electron beam system for microwave generation

    NASA Astrophysics Data System (ADS)

    Sharma, S. K.; Deb, P.; Shukla, R.; Banerjee, P.; Prabaharan, T.; Adhikary, B.; Verma, R.; Sharma, A.; Shyam, A.

    2012-11-01

    A compact 180 kV electron beam system is designed for high power microwave generation. The electron beam system is consists of a secondary energy storage device, which can deliver energy to the load at faster rate than usual primary energy storage system such as tesla transformers or marx generator. The short duration, high voltage pulse with fast rise time and good flattop is applied to vacuum diode for high power microwave generation. The compact electron beam system is made up of single turn primary tesla transformer which charges a helical pulse forming line and transfers its energy to vacuum diode through a high voltage pressurized spark gap switch. We have used helical pulse forming line which has higher inductance as compared to coaxial pulse forming line, which in turns increases, the pulse width and reduce the length of the pulse forming line. Water dielectric medium is used because of its high dielectric constant, high dielectric strength and efficient energy storage capability. The time dependent breakdown property and high relative permittivity of water makes it an ideal choice for this system. The high voltage flat-top pulse of 90 kV, 260 ns is measured across the matched load. In this article we have reported the design details, simulation and initial experimental results of 180 kV pulsed electron beam system for high power microwave generation.

  5. Motor/Generator and Inverter Characterization for Flywheel System Applications

    NASA Technical Reports Server (NTRS)

    Tamarcus, Jeffries L.

    2004-01-01

    The Advanced Electrical Systems Development Branch at NASA Glenn Research Center (GRC) has been involved in the research and development of high speed flywheels systems for satellite energy storage and attitude applications. These flywheels will serve as replacement for chemical nickel hydrogen, nickel cadmium batteries and gyroscopic wheels. The advantages of using flywheel systems for energy storage on satellites are high energy density, high power density, long life, deep depth of discharge, and broad operating temperature ranges. A flywheel system for space applications consist of a number of flywheel modules, the motor/generator and magnetic bearing, and an electronics package. The motor/generator electronics package includes a pulse-width modulated inverter that drives the flywheel permanent magnet motor/generator located at one end of the shaft. This summer, I worked under the direct supervision of my mentor, Walter Santiago, and the goal for this summer was to characterize motor generator and inverter attributes in order to increase their viability as a more efficient energy storage source for space applications. To achieve this goal, magnetic field measurements around the motor/generator permanent magnet and the impedance of the motor/generator three phase windings were characterized, and a recreation of the inverter pulse width modulated control system was constructed. The Flywheel modules for space use are designed to maximize energy density and minimize loss, and attaining these values will aid in locating and reducing losses within the flywheel system as a whole, making flywheel technology more attractive for use as energy storage in future space applications.

  6. Induction generator-induction motor wind-powered pumping system

    SciTech Connect

    Miranda, M.S.; Lyra, R.O.C.; Silva, S.R.

    1997-12-31

    The energy storage matter plays an important role in wind-electric conversion systems for isolated applications. Having that in mind, two different approaches can be basically considered: either the immediate conversion of the generated electric energy, as in a water pumping system or electric energy storage for later use, as in a battery charging system. Due to some features such as no need of an external reactive power source and, sometimes, a gearbox, permanent-magnet synchronous generators have been broadly used in low rated power isolated systems. Despite that, system performance can be affected when the generator is feeding an inductive load (e.g., an induction motor) under variable-speed-variable-frequency operational conditions. Since there is no effective flux control, motor overload may occur at high wind speeds. Thus, good system performance can be obtained through additional control devices which may increase system cost. Although being rugged and cheap, induction machines always work as a reactive power drain; therefore, they demand an external reactive power source. Considering that, reactive static compensators appear as an attractive alternative to the cost x performance problem. In addition to that, different control strategies can be used so that system performance can be improved.

  7. Control System for the LLNL Kicker Pulse Generator

    SciTech Connect

    Watson, J A; Anaya, R M; Cook, E G; Lee, B S; Hawkins, S A

    2002-06-18

    A solid-state high voltage pulse generator with multi-pulse burst capability, very fast rise and fall times, pulse width agility, and amplitude modulation capability for use with high speed electron beam kickers has been designed and tested at LLNL. A control system calculates a desired waveform to be applied to the kicker based on measured electron beam displacement then adjusts the pulse generators to provide the desired waveform. This paper presents the design of the control system and measure performance data from operation on the ETA-11 accelerator at LLNL.

  8. Generating compact classifier systems using a simple artificial immune system.

    PubMed

    Leung, Kevin; Cheong, France; Cheong, Christopher

    2007-10-01

    Current artificial immune system (AIS) classifiers have two major problems: 1) their populations of B-cells can grow to huge proportions, and 2) optimizing one B-cell (part of the classifier) at a time does not necessarily guarantee that the B-cell pool (the whole classifier) will be optimized. In this paper, the design of a new AIS algorithm and classifier system called simple AIS is described. It is different from traditional AIS classifiers in that it takes only one B-cell, instead of a B-cell pool, to represent the classifier. This approach ensures global optimization of the whole system, and in addition, no population control mechanism is needed. The classifier was tested on seven benchmark data sets using different classification techniques and was found to be very competitive when compared to other classifiers. PMID:17926714

  9. Effect of the nanocrystalline structure type on the optical properties of TiO2:Nd (1 at.%) thin films

    NASA Astrophysics Data System (ADS)

    Mazur, Michal; Wojcieszak, Damian; Kaczmarek, Danuta; Domaradzki, Jaroslaw; Zatryb, Grzegorz; Misiewicz, Jan; Morgiel, Jerzy

    2015-04-01

    Titanium dioxide thin films, each doped with the same amount of neodymium (1 at.%) were deposited by Low Pressure Hot Target Reactive Sputtering and High Energy Reactive Magnetron Sputtering processes in order to obtain anatase and rutile thin film structures respectively. The microstructure and phase composition were analyzed using the transmission electron microscopy method including high resolution electron microscopy imaging. The measurements of the optical properties showed, that both prepared thin films were transparent in the visible light range and had a low extinction coefficient of ca. 3 ṡ 10-3. The thin film with the anatase structure had a lower cut-off wavelength and refractive index and a higher value of optical energy band gap as-compared to the TiO2:Nd coating with the rutile structure. Simultaneously, more efficient photoluminescence emission was observed for the rutile thin films.

  10. Morgenröthe or business as usual: a personal account of the 2nd Annual EULAR Congress, Prague

    PubMed Central

    Wollheim, Frank A

    2001-01-01

    The 2nd Annual European League Against Rheumatism (EULAR) Congress, held in Prague, 13–16 June 2001, was an impressive event with a record turnout of 8300 delegates. It offered a large variety of first-class state of the art lectures by some 180 invited worldwide speakers. Several new and ongoing therapeutic developments were discussed. The aim to attract the young scientific community was only partly achieved, and the dependence on industry posed some problems. The organization, however, was a big improvement compared with the previous congress in this series. The number of submitted abstracts was relatively low (1200) compared with the number of delegates. Accommodation of satellite symposia and organization of poster sessions remain problem areas of this meeting. The Annual EULAR Congress emerges as one of the two most important annual congresses of rheumatology, the other being the American College of Rheumatology meeting.

  11. Use of 2nd and 3rd Level Correlation Analysis for Studying Degradation in Polycrystalline Thin-Film Solar Cells

    SciTech Connect

    Albin, D. S.; del Cueto, J. A.; Demtsu, S. H.; Bansal, S.

    2011-03-01

    The correlation of stress-induced changes in the performance of laboratory-made CdTe solar cells with various 2nd and 3rd level metrics is discussed. The overall behavior of aggregated data showing how cell efficiency changes as a function of open-circuit voltage (Voc), short-circuit current density (Jsc), and fill factor (FF) is explained using a two-diode, PSpice model in which degradation is simulated by systematically changing model parameters. FF shows the highest correlation with performance during stress, and is subsequently shown to be most affected by shunt resistance, recombination and in some cases voltage-dependent collection. Large decreases in Jsc as well as increasing rates of Voc degradation are related to voltage-dependent collection effects and catastrophic shunting respectively. Large decreases in Voc in the absence of catastrophic shunting are attributed to increased recombination. The relevance of capacitance-derived data correlated with both Voc and FF is discussed.

  12. CRACking ion channel targets: 2nd annual Ion Channel Targets Conference. 12-13 September 2006, Boston, MA, USA.

    PubMed

    Mathes, Chris

    2007-01-01

    The 2nd Annual Ion Channel Targets (ICT) Conference (by Select Bioscience LLC) was held in Boston on 12-13 September 2006. A healthy mixture of scientists from pharma, biotech and academic sectors attended the meeting. The speaker list reflected this mixture. In general, the conference focused on new ion channel targets and the methods for studying them in detail. Keynote lectures from Professors David Clapham (Harvard Medical School, USA) and Reinhold Penner (University of Hawaii, USA) set the tone by highlighting recent findings with a voltage-gated proton channel (Clapham), cation channel in sperm (Clapham) and the calcium-release-activated calcium channel (Penner). Also described at ICT were voltage-gated sodium, potassium, transmembrane-receptor-potential channels, as well as ligand-gated nicotinic acetylcholine (nAChR) and GABA type A receptors. PMID:17150038

  13. The influence of neighborhood density and word frequency on phoneme awareness in 2nd and 4th grades

    PubMed Central

    Hogan, Tiffany P.; Bowles, Ryan P.; Catts, Hugh W.; Storkel, Holly L.

    2010-01-01

    Purpose The purpose of this study was to test the hypothesis that two lexical characteristics – neighborhood density and word frequency – interact to influence performance on phoneme awareness tasks. Methods Phoneme awareness was examined in a large, longitudinal dataset of 2nd and 4th grade children. Using linear logistic test model, the relation between words' neighborhood density, word frequency, and phoneme awareness performance was examined across grades while covarying type and place of deletion. Results A predicted interaction was revealed: words from dense neighborhoods or those with high frequency were more likely to yield correct phoneme awareness responses across grades. Conclusions Findings support an expansion to the lexical restructuring model to include interactions between neighborhood density and word frequency to account for phoneme awareness. PMID:20691979

  14. International collaborative study for establishment of the 2nd WHO International Standard for Haemophilus influenzae type b polysaccharide.

    PubMed

    Mawas, Fatme; Burkin, Karena; Dougall, Thomas; Saydam, Manolya; Rigsby, Peter; Bolgiano, Barbara

    2015-11-01

    In this report we present the results of a collaborative study for the preparation and calibration of a replacement International Standard (IS) for Haemophilus influenzae type b polysaccharide (polyribosyl ribitol phosphate; 5-d-ribitol-(1 → 1)-β-d-ribose-3-phosphate; PRP). Two candidate preparations were evaluated. Thirteen laboratories from 9 different countries participated in the collaborative study to assess the suitability and determine the PRP content of two candidate standards. On the basis of the results from this study, Candidate 2 (NIBSC code 12/306) has been established as the 2nd WHO IS for PRP by the Expert Committee of Biological Standards of the World Health Organisation with a content of 4.904 ± 0.185mg/ampoule, as determined by the ribose assays carried out by 11 of the participating laboratories. PMID:26298195

  15. Numerical Simulation of the Francis Turbine and CAD used to Optimized the Runner Design (2nd).

    NASA Astrophysics Data System (ADS)

    Sutikno, Priyono

    2010-06-01

    Hydro Power is the most important renewable energy source on earth. The water is free of charge and with the generation of electric energy in a Hydroelectric Power station the production of green house gases (mainly CO2) is negligible. Hydro Power Generation Stations are long term installations and can be used for 50 years and more, care must be taken to guarantee a smooth and safe operation over the years. Maintenance is necessary and critical parts of the machines have to be replaced if necessary. Within modern engineering the numerical flow simulation plays an important role in order to optimize the hydraulic turbine in conjunction with connected components of the plant. Especially for rehabilitation and upgrading existing Power Plants important point of concern are to predict the power output of turbine, to achieve maximum hydraulic efficiency, to avoid or to minimize cavitations, to avoid or to minimized vibrations in whole range operation. Flow simulation can help to solve operational problems and to optimize the turbo machinery for hydro electric generating stations or their component through, intuitive optimization, mathematical optimization, parametric design, the reduction of cavitations through design, prediction of draft tube vortex, trouble shooting by using the simulation. The classic design through graphic-analytical method is cumbersome and can't give in evidence the positive or negative aspects of the designing options. So it was obvious to have imposed as necessity the classical design methods to an adequate design method using the CAD software. There are many option chose during design calculus in a specific step of designing may be verified in ensemble and detail form a point of view. The final graphic post processing would be realized only for the optimal solution, through a 3 D representation of the runner as a whole for the final approval geometric shape. In this article it was investigated the redesign of the hydraulic turbine's runner

  16. Laparoscopic hepatectomy is theoretically better than open hepatectomy: preparing for the 2nd International Consensus Conference on Laparoscopic Liver Resection.

    PubMed

    Wakabayashi, Go; Cherqui, Daniel; Geller, David A; Han, Ho-Seong; Kaneko, Hironori; Buell, Joseph F

    2014-10-01

    Six years have passed since the first International Consensus Conference on Laparoscopic Liver Resection was held. This comparatively new surgical technique has evolved since then and is rapidly being adopted worldwide. We compared the theoretical differences between open and laparoscopic liver resection, using right hepatectomy as an example. We also searched the Cochrane Library using the keyword "laparoscopic liver resection." The papers retrieved through the search were reviewed, categorized, and applied to the clinical questions that will be discussed at the 2nd Consensus Conference. The laparoscopic hepatectomy procedure is more difficult to master than the open hepatectomy procedure because of the movement restrictions imposed upon us when we operate from outside the body cavity. However, good visibility of the operative field around the liver, which is located beneath the costal arch, and the magnifying provide for neat transection of the hepatic parenchyma. Another theoretical advantage is that pneumoperitoneum pressure reduces hemorrhage from the hepatic vein. The literature search turned up 67 papers, 23 of which we excluded, leaving only 44. Two randomized controlled trials (RCTs) are underway, but their results are yet to be published. Most of the studies (n = 15) concerned short-term results, with some addressing long-term results (n = 7), cost (n = 6), energy devices (n = 4), and so on. Laparoscopic hepatectomy is theoretically superior to open hepatectomy in terms of good visibility of the operative field due to the magnifying effect and reduced hemorrhage from the hepatic vein due to pneumoperitoneum pressure. However, there is as yet no evidence from previous studies to back this up in terms of short-term and long-term results. The 2nd International Consensus Conference on Laparoscopic Liver Resection will arrive at a consensus on the basis of the best available evidence, with video presentations focusing on surgical techniques and the publication

  17. Utilization of geothermal energy in the mining and processing of tungsten ore. 2nd quarterly report

    SciTech Connect

    Erickson, M.V.; Willens, C.A.; Walter, K.M.; Carrico, R.L.; Lowe, G.D.; Lacy, S.B.

    1980-06-01

    The completed geochemical analysis of groundwater in the Pine Creek area for evaluation of the geothermal potential of this location is presented. Also included is an environmental constraints analysis of Pine Creek noting any potential environmental problems if a geothermal system was developed onsite. Design of a geothermal system is discussed for site-specific applications and is discussed in detail with equipment recommendations and material specifications. A preliminary financial, economic, and institutional assessment of geothermal system located totally on Union Carbide property at Pine Creek is included. (MHR)

  18. Stabilization of Wind Turbine Generator System by STATCOM

    NASA Astrophysics Data System (ADS)

    Muyeen, S. M.; Mannan, Mohammad Abdul; Ali, Mohd. Hasan; Takahashi, Rion; Murata, Toshiaki; Tamura, Junji

    Recently voltage-source or current-source inverter based various FACTS devices have been used for flexible power flow control, secure loading, damping of power system oscillation and even for the stabilization of wind energy generation. In this paper, we propose the static synchronous compensator (STATCOM) based on voltage source converter (VSC) PWM technique to stabilize grid connected wind generator system. A simple control strategy of STATCOM is adopted where only measurement of rms voltage at the wind generator terminal is needed. Fuzzy logic controller rather than conventional PI controller is proposed as the control methodology of STATCOM. Multi-mass shaft model of wind turbine generator system (WTGS) is also considered as shaft modeling has a big influence on the transient performance of WTGS. Transient performance of STATCOM connected WTGS is compared also with that of pitch controlled WTGS. Both symmetrical and unsymmetrical faults are analyzed. Moreover, the steady state performance of STATCOM connected WTGS is analyzed. It is reported that STATCOM can reduce the voltage fluctuation significantly. Finally STATCOM is applied to a wind park model with multiple wind generators. Comprehensive results are presented to assess the performance of STATCOM connected WTGS, where the simulations have been done by PSCAD/EMTDC.

  19. Model based document and report generation for systems engineering

    NASA Astrophysics Data System (ADS)

    Delp, C.; Lam, D.; Fosse, E.; Lee, Cin-Young

    As Model Based Systems Engineering (MBSE) practices gain adoption, various approaches have been developed in order to simplify and automate the process of generating documents from models. Essentially, all of these techniques can be unified around the concept of producing different views of the model according to the needs of the intended audience. In this paper, we will describe a technique developed at JPL of applying SysML Viewpoints and Views to generate documents and reports. An architecture of model-based view and document generation will be presented, and the necessary extensions to SysML with associated rationale will be explained. A survey of examples will highlight a variety of views that can be generated, and will provide some insight into how collaboration and integration is enabled. We will also describe the basic architecture for the enterprise applications that support this approach.

  20. Waveform generation for ultra-wideband radar system

    NASA Astrophysics Data System (ADS)

    Chiang, Hsiao-Feng

    1993-12-01

    In the current literature, ultra-wideband (UWB) waveforms are said to possess several potential advantages such as penetration of foliage, walls and ground, as well as target identification and detection of stealth targets. Due to the potential advantages of UWB waveforms, UWB power sources are currently being developed. This thesis investigates the Fourier synthesis method of waveform generation which is to be used with ultra-wideband radar. The major advantages of this method over traditional methods are that accurate control of pulse shapes and pulse repetition intervals (PRI) can be generated. In this thesis, the Fourier method is extended to generation of binary coded waveforms for UWB systems. The generation of such codes is important as it allows for the use of longer coded pulses. These coded pulses contain more energy and improve signal to noise ratio (SNR) while still retaining the range resolution and other benefits of smaller pulse widths.

  1. Model Based Document and Report Generation for Systems Engineering

    NASA Technical Reports Server (NTRS)

    Delp, Christopher; Lam, Doris; Fosse, Elyse; Lee, Cin-Young

    2013-01-01

    As Model Based Systems Engineering (MBSE) practices gain adoption, various approaches have been developed in order to simplify and automate the process of generating documents from models. Essentially, all of these techniques can be unified around the concept of producing different views of the model according to the needs of the intended audience. In this paper, we will describe a technique developed at JPL of applying SysML Viewpoints and Views to generate documents and reports. An architecture of model-based view and document generation will be presented, and the necessary extensions to SysML with associated rationale will be explained. A survey of examples will highlight a variety of views that can be generated, and will provide some insight into how collaboration and integration is enabled. We will also describe the basic architecture for the enterprise applications that support this approach.

  2. The integration of terrestrial and extraterrestrial solar generators into existing power generation systems

    NASA Astrophysics Data System (ADS)

    Stoy, B.; Beyer, U.

    The effectiveness of a decentralized terrestrial solar-power generation system and a solar-power-satellite/microwave-transmission generation system is analyzed comparatively for the case of the Federal Republic of Germany (FRG). The models considered are a 5-GW-peak-capacity network comprising one million 50-sq-m roof arrays of Si solar cells and the 5-GW-capacity 52-sq-km-array 100-sq-km-receiver reference satellite system proposed by the DOE and NASA; both models are assumed to be integrated into the present FRG power network, and the load requirements and system outputs are compared in a series of graphs and diagrams. The terrestrial system is found to provide no savings in grid-capacity or plant-capacity requirements and minimal fuel savings (at least in the FRG climate) corresponding to at most 5 Pfennig/kWh. The satellite system, assuming that a European grid can provide an emergency reserve, offers substantial fuel and plant-capacity savings corresponding to about 8.75 Pfennig/kWh. It is pointed out that the overall economy of these systems depends on the investment costs of installing them (plus the investment cost of additional conventional plant capacity for the terrestrial model).

  3. Power fluctuations smoothing and regulations in wind turbine generator systems

    NASA Astrophysics Data System (ADS)

    Babazadehrokni, Hamed

    Wind is one of the most popular renewable energy sources and it has the potential to become the biggest energy source in future. Since the wind does not always blow constantly, the output wind power is not constant which may make some problem for the power grid. According to the grid code which is set by independent system operator, ISO, wind turbine generator systems need to follow some standards such as the predetermined acceptable power fluctuations. In order to smooth the output powers, the energy storage system and some power electronics modules are employed. The utilized power electronics modules in the wind turbine system can pursue many different goals, such as maintaining the voltage stability, frequency stability, providing the available and predetermined output active and reactive power. On the other side, the energy storage system can help achieving some of these goals but its main job is to store the extra energy when not needed and release the stored energy when needed. The energy storage system can be designed in different sizes, material and also combination of different energy storage systems (hybrid designs). Combination of power electronics devises and also energy storage system helps the wind turbine systems to smooth the output power according to the provided standards. In addition prediction of wind speed may improve the performance of wind turbine generator systems. In this research study all these three topics are studied and the obtained results are written in 10 papers which 7 of them are published and three of them are under process.

  4. Procurement of a fully licensed radioisotope thermoelectric generator transportation system

    SciTech Connect

    Adkins, H.E.; Bearden, T.E.

    1990-10-01

    A fully licensed transportation system for Radioisotope Thermoelectric Generators and Light-Weight Radioisotope Heater Units is currently being designed and built. The system will comply with all applicable US Department of Transportation regulations without the use of a DOE Alternative.'' The US Department of Transportation has special double containment'' requirements for plutonium. The system packaging uses a doubly contained bell jar'' concept. A refrigerated trailer is used for cooling the high-heat payloads. The same packaging is used for both high- and low-heat payloads. The system is scheduled to be available for use by mid-1992. 4 refs., 4 figs., 2 tabs.

  5. A smoke generator system for aerodynamic flight research

    NASA Technical Reports Server (NTRS)

    Richwine, David M.; Curry, Robert E.; Tracy, Gene V.

    1989-01-01

    A smoke generator system was developed for in-flight vortex flow studies on the F-18 high alpha research vehicle (HARV). The development process included conceptual design, a survey of existing systems, component testing, detailed design, fabrication, and functional flight testing. Housed in the forebody of the aircraft, the final system consists of multiple pyrotechnic smoke cartridges which can be fired simultaneously or in sequence. The smoke produced is ducted to desired locations on the aircraft surface. The smoke generator system (SGS) has been used successfully to identify vortex core and core breakdown locations as functions of flight condition. Although developed for a specific vehicle, this concept may be useful for other aerodynamic flight research which requires the visualization of local flows.

  6. Solid Oxide Fuel Cell Hybrid System for Distributed Power Generation

    SciTech Connect

    Faress Rahman; Nguyen Minh

    2004-01-04

    This report summarizes the work performed by Hybrid Power Generation Systems, LLC (HPGS) during the July 2003 to December 2003 reporting period under Cooperative Agreement DE-FC26-01NT40779 for the U. S. Department of Energy, National Energy Technology Laboratory (DOE/NETL) entitled ''Solid Oxide Fuel Cell Hybrid System for Distributed Power Generation''. The main objective of this project is to develop and demonstrate the feasibility of a highly efficient hybrid system integrating a planar Solid Oxide Fuel Cell (SOFC) and a micro-turbine. In addition, an activity included in this program focuses on the development of an integrated coal gasification fuel cell system concept based on planar SOFC technology. Also, another activity included in this program focuses on the development of SOFC scale up strategies.

  7. Solid Oxide Fuel Cell Hybrid System for Distributed Power Generation

    SciTech Connect

    Nguyen Minh

    2004-07-04

    This report summarizes the work performed by Hybrid Power Generation Systems, LLC (HPGS) during the January to June 2004 reporting period under Cooperative Agreement DE-FC26-01NT40779 for the U. S. Department of Energy, National Energy Technology Laboratory (DOE/NETL) entitled ''Solid Oxide Fuel Cell Hybrid System for Distributed Power Generation''. The main objective of this project is to develop and demonstrate the feasibility of a highly efficient hybrid system integrating a planar Solid Oxide Fuel Cell (SOFC) and a micro-turbine. In addition, an activity included in this program focuses on the development of an integrated coal gasification fuel cell system concept based on planar SOFC technology. Also, another activity included in this program focuses on the development of SOFC scale up strategies.

  8. MULTIOBJECTIVE OPTIMIZATION POWER GENERATION SYSTEMS INVOLVING CHEMICAL LOOPING COMBUSTION

    SciTech Connect

    Juan M. Salazar; Urmila M. Diwekar; Stephen E. Zitney

    2009-01-01

    Integrated Gasification Combined Cycle (IGCC) system using coal gasification is an important approach for future energy options. This work focuses on understading the system operation and optimizing it in the presence of uncertain operating conditions using ASPEN Plus and CAPE-OPEN compliant stochastic simulation and multiobjective optimization capabilities developed by Vishwamitra Research Institute. The feasible operating surface for the IGCC system is generated and deterministic multiobjective optimization is performed. Since the feasible operating space is highly non-convex, heuristics based techniques that do not require gradient information are used to generate the Pareto surface. Accurate CFD models are simultaneously developed for the gasifier and chemical looping combustion system to characterize and quantify the process uncertainty in the ASPEN model.

  9. Concept selection and analysis of large wind generator systems

    NASA Technical Reports Server (NTRS)

    Meier, R. C.

    1975-01-01

    The increasing need to develop alternative energy sources has renewed interest in the use of wind energy for the generation of utility quality electricity. This paper discusses a program to evolve a preliminary design of a cost competitive large wind generator system. An examination of a number of technically feasible alternative wind energy configurations is reported, and the rationale used in selecting the preferred system concept is presented. In addition, preliminary results of an optimization study conducted on the preferred concept are summarized. These show that considerable latitude in the selection of the system design parameters is possible. This permits design decisions to be based on other important factors such as development risk and the suitability of common component designs for systems with different power ratings.

  10. Performance optimization for doubly-fed generation systems

    NASA Astrophysics Data System (ADS)

    Bhowmik, Shibashis

    A variable speed generation (VSG) system converts energy from a variable resource such as wind or water flow into variable rotational mechanical energy of a turbine or a similar device that converts translational kinetic energy into rotational mechanical energy. The mechanical energy is then converted into electrical energy by an electrical generator. Presently available and proposed generators include systems based mainly on dc machines, synchronous and induction machine technology as well as reluctance machines. While extracting more energy from the resource, most proposed VSG systems suffer a cost disadvantage due to the required rating of the power electronic interface. This cost penalty may eventually render the additional energy capture meaningless. Thus, reducing the cost of the power electronic hardware is essential for VSG systems to achieve viable and competitive $/kWh ratios when compared to fossil fuel-based generating systems. A variable speed constant frequency (VSCF) system and controller are proposed that utilize a doubly-fed machine (DFM) as the energy conversion device. The system includes a power converter that provides the current excitation for the control winding of the DFM. Both the magnitude and frequency of the excitation is determined by an adaptive model-based controller which maximizes the power flow from the mechanical turbine to the electrical grid and reduces the generator losses by maintaining the maximum efficiency point throughout the mechanical input power range. The proposed strategy has been experimentally verified in controlled laboratory conditions for a proof-of-concept brushless doubly-fed machine (BDFM) system of 1500 Watts power rating. Issues relating to power converter development and its incorporation in the system have been investigated. The controller and circuit design of a four quadrant, AC/AC power converter is presented and a novel sensorless current controller for the active rectifier stage is presented in detail

  11. Generative Representations for Computer-Automated Design Systems

    NASA Technical Reports Server (NTRS)

    Hornby, Gregory S.

    2004-01-01

    With the increasing computational power of Computers, software design systems are progressing from being tools for architects and designers to express their ideas to tools capable of creating designs under human guidance. One of the main limitations for these computer-automated design programs is the representation with which they encode designs. If the representation cannot encode a certain design, then the design program cannot produce it. Similarly, a poor representation makes some types of designs extremely unlikely to be created. Here we define generative representations as those representations which can create and reuse organizational units within a design and argue that reuse is necessary for design systems to scale to more complex and interesting designs. To support our argument we describe GENRE, an evolutionary design program that uses both a generative and a non-generative representation, and compare the results of evolving designs with both types of representations.

  12. Radioisotope thermoelectric generator transportation system subsystem 143 software development plan

    NASA Astrophysics Data System (ADS)

    King, D. A.

    1994-11-01

    This plan describes the activities to be performed and the controls to be applied to the process of specifying, developing, and qualifying the data acquisition software for the Radioisotope Thermoelectric Generator (RTG) Transportation System Subsystem 143 Instrumentation and Data Acquisition System (IDAS). This plan will serve as a software quality assurance plan, a verification and validation (V and V) plan, and a configuration management plan.

  13. Radioisotope thermoelectric generator transportation system subsystem 143 software development plan

    SciTech Connect

    King, D.A.

    1994-11-10

    This plan describes the activities to be performed and the controls to be applied to the process of specifying, developing, and qualifying the data acquisition software for the Radioisotope Thermoelectric Generator (RTG) Transportation System Subsystem 143 Instrumentation and Data Acquisition System (IDAS). This plan will serve as a software quality assurance plan, a verification and validation (V and V) plan, and a configuration management plan.

  14. Control System for a Diesel Generator and UPS Based Microgrid

    NASA Astrophysics Data System (ADS)

    Palamar, Andriy; Pettai, Elmo; Beldjajev, Viktor

    2010-01-01

    In this paper a microgrid composed of a diesel generator and two uninterruptible power supply systems with separate battery banks is introduced. The microgrid located in three academic buildings of Tallinn University of Technology. A three-level control and monitoring system for the microgrid based on the EtherNet/IP communication network is developed. In addition, a control strategy of the microgrid in the grid-connected and stand-alone mode of operation is proposed.

  15. Primary electric power generation systems for advanced-technology engines

    NASA Technical Reports Server (NTRS)

    Cronin, M. J.

    1983-01-01

    The advantages of the all electric airplane are discussed. In the all electric airplane the generator is the sole source of electric power; it powers the primary and secondary flight controls, the environmentals, and the landing gear. Five candidates for all electric power systems are discussed and compared. Cost benefits of the all electric airplane are discussed.

  16. Next-Generation Linear Collider Final Focus System Stability Tolerances

    SciTech Connect

    Roy, G.; Irwin, J.; /SLAC

    2007-04-25

    The design of final focus systems for the next generation of linear colliders has evolved largely from the experience gained with the design and operation of the Stanford Linear Collider (SLC) and with the design of the Final Focus Test Beam (FFTB). We will compare the tolerances for two typical designs for a next-generation linear collider final focus system. The chromaticity generated by strong focusing systems, like the final quadrupole doublet before the interaction point of a linear collider, can be canceled by the introduction of sextupoles in a dispersive region. These sextupoles must be inserted in pairs separated by a -I transformation (Chromatic Correction Section) in order to cancel the strong geometric aberrations generated by sextupoles. Designs proposed for both the JLC or NLC final focus systems have two separate chromatic correction sections, one for each transverse plane separated by a ''{beta}-exchanger'' to manipulate the {beta}-function between the two CCS. The introduction of sextupoles and bending magnets gives rise to higher order aberrations (long sextupole and chrome-geometries) and radiation induced aberrations (chromaticity unbalance and ''Oide effect'') and one must optimize the lattice accordingly.

  17. Wind turbine generator interaction with diesel generators on an isolated power system

    NASA Technical Reports Server (NTRS)

    Scott, G. W.; Wilreker, V. F.; Shaltens, R. K.

    1983-01-01

    The results of a dynamic interaction investigation to characterize any disturbances caused by interfacing the Mod 0A wind turbine (150 kW configuration) with the Block Island utility diesel generator grid are reported. The tests were run when only two diesel generators were on line, and attention was given to power, frequency, and voltage time profiles. The interconnected system was examined in the start-up and synchronization phase, normal shutdown and cut-out of the wind turbine, during fixed pitch generation, and during variable pitch operation. Governors were installed on the diesel generators to accommodate the presence of wind-derived electricity. The blade pitch control was set to maintain power at 150 kW or below. Power and voltage transients were insignificant during start-up and shutdown, and frequency aberrations were within the range caused by load fluctuations. It is concluded that wind turbine generation can be successfully implemented by an isolated utility, even with a significant penetration to the total grid output.

  18. Wind turbine generator interaction with diesel generators on an isolated power system

    SciTech Connect

    Scott, G.W.; Wilreker, V.F.

    1983-01-01

    The results of a dynamic interaction investigation to characterize any disturbances caused by interfacing the Mod 0A wind turbine (150 kW configuration) with the Block Island utility diesel generator grid are reported. The tests were run when only two diesel generators were on line, and attention was given to power, frequency, and voltage time profiles. The interconnected system was examined in the start-up and synchronization phase, normal shutdown and cut-out of the wind turbine, during fixed pitch generation, and during variable pitch operation. Governors were installed on the diesel generators to accommodate the presence of wind-derived electricity. The blade pitch control was set to maintain power at 150 kW or below. Power and voltage transients were insignificant during start-up and shutdown, and frequency aberrations were within the range caused by load fluctuations. It is concluded that wind turbine generation can be successfully implemented by an isolated utility, even with a significant penetration to the total grid output. 5 references.

  19. System for real-time generation of georeferenced terrain models

    NASA Astrophysics Data System (ADS)

    Schultz, Howard J.; Hanson, Allen R.; Riseman, Edward M.; Stolle, Frank; Zhu, Zhigang; Hayward, Christopher D.; Slaymaker, Dana

    2001-02-01

    A growing number of law enforcement applications, especially in the areas of border security, drug enforcement and anti- terrorism require high-resolution wide area surveillance from unmanned air vehicles. At the University of Massachusetts we are developing an aerial reconnaissance system capable of generating high resolution, geographically registered terrain models (in the form of a seamless mosaic) in real-time from a single down-looking digital video camera. The efficiency of the processing algorithms, as well as the simplicity of the hardware, will provide the user with the ability to produce and roam through stereoscopic geo-referenced mosaic images in real-time, and to automatically generate highly accurate 3D terrain models offline in a fraction of the time currently required by softcopy conventional photogrammetry systems. The system is organized around a set of integrated sensor and software components. The instrumentation package is comprised of several inexpensive commercial-off-the-shelf components, including a digital video camera, a differential GPS, and a 3-axis heading and reference system. At the heart of the system is a set of software tools for image registration, mosaic generation, geo-location and aircraft state vector recovery. Each process is designed to efficiently handle the data collected by the instrument package. Particular attention is given to minimizing geospatial errors at each stage, as well as modeling propagation of errors through the system. Preliminary results for an urban and forested scene are discussed in detail.

  20. VizieR Online Data Catalog: Cool Galactic Carbon Stars, 2nd Edition (Stephenson 1989)

    NASA Astrophysics Data System (ADS)

    Stephenson, C. B.

    1996-06-01

    The catalog is intended to list all 5987 cool carbon stars having known positions of at least roughly the precision of The Henry Draper Catalogue. Cool carbon stars are defined as stars whose spectra at low dispersion (say a resolution no better than 1-2 angstroms) are known to show bands of the Swan system of the C2 molecule; or, if the spectral region of the Swan system is inadequately observed, they show the red or infrared bands of CN in strength adequate to infer that the Swan bands almost certainly would be seen if their presence could be tested. The closing date for literature search was 1989 June 30, defined by literature received in the author's library by that date. The catalog includes equatorial coordinates (B1900.0); photographic, visual, and infrared magnitudes; spectral types, galactic coordinates, and cross identifications to various other designation systems. (4 data files).

  1. Catalan: The Catalan Language in Education in Spain, 2nd Edition. Regional Dossiers Series

    ERIC Educational Resources Information Center

    Areny, Maria, Comp.; Mayans, Pere, Comp.; Forniès, David, Comp.

    2013-01-01

    Regional dossiers aim at providing a concise description and basic statistics about minority language education in a specific region of Europe. Aspects that are addressed include features of the education system, recent educational policies, main actors, legal arrangements, and support structures, as well as quantitative aspects, such as the…

  2. Swedish: The Swedish Language in Education in Finland, 2nd Edition. Regional Dossiers Series

    ERIC Educational Resources Information Center

    Østern, Anna-Lena, Comp.; Harju-Luukkainen, Heidi, Comp.

    2013-01-01

    This regional dossier aims to provide a concise, description and basic statistics about minority language education in a specific region of Europe. Aspects that are addressed include features of the education system, recent educational policies, main actors, legal arrangements, and support structures, as well as quantitative aspects, such as the…

  3. Asturian: The Asturian Language in Education in Spain, 2nd Edition. Regional Dossiers Series

    ERIC Educational Resources Information Center

    González-Riaño, Xosé Antón, Comp.; Fernández-Costales, Alberto, Comp.

    2014-01-01

    This regional dossier aims to provide a concise, description and basic statistics about minority language education in a specific region of Europe. Aspects that are addressed include features of the education system, recent educational policies, main actors, legal arrangements, and support structures, as well as quantitative aspects, such as the…

  4. Welsh: The Welsh Language in Education in the UK, 2nd Edition. Regional Dossiers Series

    ERIC Educational Resources Information Center

    Jones, Meirion Prys, Comp.; Jones, Ceinwen, Comp.

    2014-01-01

    This regional dossier aims to provide a concise, description and basic statistics about minority language education in a specific region of Europe. Aspects that are addressed include features of the education system, recent educational policies, main actors, legal arrangements, and support structures, as well as quantitative aspects, such as the…

  5. English L2 Reading: Getting to the Bottom. 2nd Edition

    ERIC Educational Resources Information Center

    Birch, Barbara M.

    2007-01-01

    This book remains a comprehensive, myth-debunking examination of how L1 features (orthographic system, phonology, morphology) can influence English L2 reading at the "bottom" of the reading process. It provides a thorough but very accessible linguistic/psycholinguistic examination of the lowest levels of the reading process. It is both theoretical…

  6. Prison Education in England and Wales. (2nd Revised Edition). Mendip Papers MP 022.

    ERIC Educational Resources Information Center

    Ripley, Paul

    In response to prison disturbances in England and Wales in the late 1980s, the education program for prisoners was improved and more prisoners were given access to educational services. Although education is a relatively new phenomenon in the English and Welsh penal system, by the 20th century, education had become an integral part of prison life.…

  7. German: The German Language in Education in Alsace, France. 2nd Edition. Regional Dossiers Series.

    ERIC Educational Resources Information Center

    Van der Schaaf, Alie, Comp.; Morgen, Daniel, Comp.

    This regional dossier aims to provide concise, descriptive information and basic educational statistics about minority language education in a specific region of the European Union-- Alsace, a part of France along the German border. Details about the features of the educational system, recent educational policies, divisions of responsibilities,…

  8. A numerical investigation of a thermodielectric power generation system

    NASA Astrophysics Data System (ADS)

    Sklar, Akiva A.

    The performance of a novel micro-thermodielectric power generation system was investigated in order to determine if thermodielectric power generation can be practically employed and if its performance can compete with current portable power generation technologies. Thermodielectric power generation is a direct energy conversion technology that converts heat directly into high voltage direct current. It requires dielectric (i.e., capacitive) materials whose charge storing capabilities are a function of temperature. This property can be exploited by heating these materials after they are charged; as their temperature increases, their charge storage capability decreases, forcing them to eject a portion of their surface charge. This ejected charge can then be supplied to an appropriate electronic storage device. There are several advantages associated with thermodielectric energy conversion; first, it requires heat addition at relatively low conventional power generation temperatures, i.e., less than 600 °K, and second, devices that utilize it have the potential for excellent power density and device reliability. The predominant disadvantage of using this power generation technique is that the device must operate in an unsteady manner; this can lead to substantial heat transfer losses that limit the device's thermal efficiency. The studied power generation system was designed so that the power generating components of the system (i.e., the thermodielectric materials) are integrated within a micro-scale heat exchange apparatus designed specifically to provide the thermodielectric materials with the unsteady heating and cooling necessary for efficient power generation. This apparatus is designed to utilize a liquid as a working fluid in order to maximize its heat transfer capabilities, minimize the size of the heat exchanger, and maximize the power density of the power generation system. The thermodielectric materials are operated through a power generation cycle that

  9. Rocketdyne - J-2 Saturn V 2nd and 3rd Stage Engine. Chapter 2, Appendix D

    NASA Technical Reports Server (NTRS)

    Coffman, Paul

    2009-01-01

    The J-2 engine was unique in many respects. Technology was not nearly as well-developed in oxygen/hydrogen engines at the start of the J-2 project. As a result, it experienced a number of "teething" problems. It was used in two stages on the Saturn V vehicle in the Apollo Program, as well as on the later Skylab and Apollo/Soyuz programs. In the Apollo Program, it was used on the S-II stage, which was the second stage of the Saturn V vehicle. There were five J-2 engines at the back end of the S-II Stage. In the S-IV-B stage, it was a single engine, but that single engine had to restart. The Apollo mission called for the entire vehicle to reach orbital velocity in low Earth orbit after the first firing of the Saturn-IV-B stage and, subsequently, to fire a second time to go on to the moon. The engine had to be man-rated (worthy of transporting humans). It had to have a high thrust rate and performance associated with oxygen/hydrogen engines, although there were some compromises there. It had to gimbal for thrust vector control. It was an open-cycle gas generator engine delivering up to 230,000 pounds of thrust.

  10. SOLID OXIDE FUEL CELL HYBRID SYSTEM FOR DISTRIBUTED POWER GENERATION

    SciTech Connect

    Faress Rahman; Nguyen Minh

    2003-07-01

    This report summarizes the work performed by Hybrid Power Generation Systems, LLC during the January 2003 to June 2003 reporting period under Cooperative Agreement DE-FC26-01NT40779 for the U. S. Department of Energy, National Energy Technology Laboratory (DOE/NETL) entitled ''Solid Oxide Fuel Cell Hybrid System for Distributed Power Generation''. The main objective of this project is to develop and demonstrate the feasibility of a highly efficient hybrid system integrating a planar Solid Oxide Fuel Cell (SOFC) and a micro-turbine. In addition, an activity included in this program focuses on the development of an integrated coal gasification fuel cell system concept based on planar SOFC technology. This report summarizes the results obtained to date on: System performance analysis and model optimization; Reliability and cost model development; System control including dynamic model development; Heat exchanger material tests and life analysis; Pressurized SOFC evaluation; and Pre-baseline system definition for coal gasification fuel cell system concept.

  11. Proceedings from the 2nd International Symposium on Formation Flying Missions and Technologies

    NASA Technical Reports Server (NTRS)

    2004-01-01

    Topics discussed include: The Stellar Imager (SI) "Vision Mission"; First Formation Flying Demonstration Mission Including on Flight Nulling; Formation Flying X-ray Telescope in L2 Orbit; SPECS: The Kilometer-baseline Far-IR Interferometer in NASA's Space Science Roadmap Presentation; A Tight Formation for Along-track SAR Interferometry; Realization of the Solar Power Satellite using the Formation Flying Solar Reflector; SIMBOL-X : Formation Flying for High-Energy Astrophysics; High Precision Optical Metrology for DARWIN; Close Formation Flight of Micro-Satellites for SAR Interferometry; Station-Keeping Requirements for Astronomical Imaging with Constellations of Free-Flying Collectors; Closed-Loop Control of Formation Flying Satellites; Formation Control for the MAXIM Mission; Precision Formation Keeping at L2 Using the Autonomous Formation Flying Sensor; Robust Control of Multiple Spacecraft Formation Flying; Virtual Rigid Body (VRB) Satellite Formation Control: Stable Mode-Switching and Cross-Coupling; Electromagnetic Formation Flight (EMFF) System Design, Mission Capabilities, and Testbed Development; Navigation Algorithms for Formation Flying Missions; Use of Formation Flying Small Satellites Incorporating OISL's in a Tandem Cluster Mission; Semimajor Axis Estimation Strategies; Relative Attitude Determination of Earth Orbiting Formations Using GPS Receivers; Analysis of Formation Flying in Eccentric Orbits Using Linearized Equations of Relative Motion; Conservative Analytical Collision Probabilities for Orbital Formation Flying; Equations of Motion and Stability of Two Spacecraft in Formation at the Earth/Moon Triangular Libration Points; Formations Near the Libration Points: Design Strategies Using Natural and Non-Natural Ares; An Overview of the Formation and Attitude Control System for the Terrestrial Planet Finder Formation Flying Interferometer; GVE-Based Dynamics and Control for Formation Flying Spacecraft; GNC System Design for a New Concept of X

  12. Solar Stirling power generation - Systems analysis and preliminary tests

    NASA Technical Reports Server (NTRS)

    Selcuk, M. K.; Wu, Y.-C.; Moynihan, P. I.; Day, F. D., III

    1977-01-01

    The feasibility of an electric power generation system utilizing a sun-tracking parabolic concentrator and a Stirling engine/linear alternator is being evaluated. Performance predictions and cost analysis of a proposed large distributed system are discussed. Design details and preliminary test results are presented for a 9.5 ft diameter parabolic dish at the Jet Propulsion Laboratory (Caltech) Table Mountain Test Facility. Low temperature calorimetric measurements were conducted to evaluate the concentrator performance, and a helium flow system is being used to test the solar receiver at anticipated working fluid temperatures (up to 650 or 1200 C) to evaluate the receiver thermal performance. The receiver body is designed to adapt to a free-piston Stirling engine which powers a linear alternator assembly for direct electric power generation. During the next phase of the program, experiments with an engine and receiver integrated into the concentrator assembly are planned.

  13. An MHD generator energy flow time rate extremal controlling system

    SciTech Connect

    Vasiliev, V.V.

    1993-12-31

    The progress in the development and studying of new methods of producing electric energy, based on direct conversion of heat energy, raises the problem of more effective use of their power characteristics. Disclosure is made of a self-optimizing control system for an object with a unimodal quality function. The system comprises an object, a divider, a band-pass filter, an averaging filter, a multiplier, a final control element, an adder and further includes a search signal generator. The fashion and the system are presented in the USSR No. 684510, in the USA No. 4179730, in France No. 2386854, In Germany No. 2814963, in Japan No. 1369882. The progress in the development and studying of new method of producing electric energy, based on direct conversion of heat in MHD generator into electric energy, raises the problem of more effective use of their power characteristics.

  14. Generative design in architecture using an expert system

    NASA Astrophysics Data System (ADS)

    Gullichsen, E.; Chang, E.

    The mathematician-architect Christopher Alexander has devised a theory of objective architectural design. He believes that all architectural forms can be described as interacting patterns, all possible relationships of which are governed by generative rules. These form a pattern language' capable of generating forms appropriate for a given environmental context. The complexity of interaction among these rules leads to difficulties in their representation by conventional methods. Here, a Prolog-based expert system is presented which implements Alexander's design methodology to produce perspective views of partially and fully differentiated 3-dimensional architectural forms.

  15. Systems engineering approach towards performance monitoring of emergency diesel generator

    NASA Astrophysics Data System (ADS)

    Ramli, Nurhayati; Yong-kwan, Lee

    2014-02-01

    Systems engineering is an interdisciplinary approach and means to enable the realization of successful systems. In this study, systems engineering approach towards the performance monitoring of Emergency Diesel Generator (EDG) is presented. Performance monitoring is part and parcel of predictive maintenance where the systems and components conditions can be detected before they result into failures. In an effort to identify the proposal for addressing performance monitoring, the EDG boundary has been defined. Based on the Probabilistic Safety Analysis (PSA) results and industry operating experiences, the most critical component is identified. This paper proposed a systems engineering concept development framework towards EDG performance monitoring. The expected output of this study is that the EDG reliability can be improved by the performance monitoring alternatives through the systems engineering concept development effort.

  16. Systems engineering approach towards performance monitoring of emergency diesel generator

    SciTech Connect

    Ramli, Nurhayati Yong-kwan, Lee

    2014-02-12

    Systems engineering is an interdisciplinary approach and means to enable the realization of successful systems. In this study, systems engineering approach towards the performance monitoring of Emergency Diesel Generator (EDG) is presented. Performance monitoring is part and parcel of predictive maintenance where the systems and components conditions can be detected before they result into failures. In an effort to identify the proposal for addressing performance monitoring, the EDG boundary has been defined. Based on the Probabilistic Safety Analysis (PSA) results and industry operating experiences, the most critical component is identified. This paper proposed a systems engineering concept development framework towards EDG performance monitoring. The expected output of this study is that the EDG reliability can be improved by the performance monitoring alternatives through the systems engineering concept development effort.

  17. Molten carbonate fuel cell product design & improvement - 2nd quarter, 1996. Quarterly report, April 1--June 30, 1996

    SciTech Connect

    1997-05-01

    The main objective of this project is to establish the commercial readiness of a molten carbonate fuel cell power plant for distributed power generation, cogeneration, and compressor station applications. This effort includes marketing, systems design and analysis, packaging and assembly, test facility development, and technology development, improvement, and verification.

  18. Plasma motor generator tether system for orbit reboost

    NASA Technical Reports Server (NTRS)

    Hulkower, Neal D.; Rusch, Roger J.

    1988-01-01

    This paper describes a comprehensive study of an electrodynamic tether used as a Plasma Motor Generator (PMG). The paper summarizes the work performed in the study and includes: (1) a detailed design of a 2 kW PMG tether system to be used for orbit reboost, (2) the selection of the Orbiting Maneuvering Vehicle (OMV) and the European Retrievable Carrier (EURECA) as the primary candidate spacecraft to host the experimental system, (3) analysis of the integration of the PMG tether system with these two spacecraft, (4) the simulation of the deployment of the tether, and (5) an engineering design and development plan leading to a flight demonstration of this PMG tether.

  19. Small Accelerators for the Next Generation of BNCT Irradiation Systems

    SciTech Connect

    Kobayashi, T.; Tanaka, K.; Bengua, G.; Hoshi, M.; Nakagawa, Y.

    2005-01-15

    The neutron irradiation system for boron neutron capture therapy (BNCT) using compact accelerators installed at hospitals was mainly investigated for the usage of direct neutrons from near-threshold {sup 7}Li(p,n){sup 7}Be, and moderated neutrons from 2.5 MeV {sup 7}Li(p,n){sup 7}Be reactions and other reactions. This kind of system can supply the medical doctors and patients with convenience to carry out BNCT in hospitals. The accelerator system would be regarded as the next-generation of BNCT in the near future.

  20. Design of robust level control system of nuclear steam generator

    NASA Astrophysics Data System (ADS)

    Lee, Y. J.; Na, M. G.

    2007-12-01

    The nuclear steam generator feedwater control system is designed by the robust control methods. The design is divided into two steps. First, the feedwater controller in the feedwater station is designed by H ∞ and MWS methods. Then the controller located on the feedback loop is designed both by classical PID and by robust technique. It is found that the feedback controller of simple PID whose coefficients vary with the power is proper for the system performance. The simulations show that the hybrid system of H ∞ and PID has a good performance with proper stability margins.