Science.gov

Sample records for 3-4 km thick

  1. Changes in single skinfold thickness in 100 km ultramarathoners

    PubMed Central

    Knechtle, Beat; Baumgartner, Sabrina; Knechtle, Patrizia; Rüst, Christoph Alexander; Rosemann, Thomas; Bescós, Raúl

    2012-01-01

    Background Changes in single skinfold thickness and body fat have been investigated in ultraswimmers and ultracyclists, but not in ultrarunners. The present study investigated the changes in single skinfold thickness during a 100 km ultramarathon. Methods Firstly, we investigated associations between prerace preparation and prerace body composition and, secondly, changes in single skinfold thickness during a 100 km ultramarathon in 219 male ultramarathoners. Changes in fat mass and skeletal muscle were estimated using anthropometric methods. Results Kilometers run weekly prerace and running speed during training were negatively associated with all skinfold thicknesses (P < 0.05) except for the front thigh skinfold. During the race, skinfold thickness at the pectoral (−0.1%), suprailiac (−1.8%), and calf (−0.8%) sites decreased (P < 0.05). The subjects lost 1.9 ± 1.4 kg of body mass (P < 0.001), 0.7 ± 1.0 kg of estimated skeletal muscle mass (P < 0.001), and 0.2 ± 1.3 kg of estimated fat mass (P < 0.05). The decrease in body mass was positively related to the decrease in both estimated skeletal muscle mass (r = 0.21, P = 0.0017) and estimated fat mass (r = 0.41, P < 0.0001). Conclusion Firstly, prerace fat mass and prerace skinfold thickness were associated with both volume and speed in running training. Secondly, during the ultramarathon, skinfold thickness decreased at the pectoral, suprailiac, and calf sites, but not at the thigh site. Percent decreases in skinfold thickness for ultrarunners was lower than the percent decreases in skinfold thickness reported for ultraswimmers and ultracyclists. PMID:24198597

  2. Twelve-month, 12 km resolution North American WRF-Chem v3.4 air quality simulation: performance evaluation

    DOE PAGESBeta

    Tessum, C. W.; Hill, J. D.; Marshall, J. D.

    2015-04-07

    We present results from and evaluate the performance of a 12-month, 12 km horizontal resolution year 2005 air pollution simulation for the contiguous United States using the WRF-Chem (Weather Research and Forecasting with Chemistry) meteorology and chemical transport model (CTM). We employ the 2005 US National Emissions Inventory, the Regional Atmospheric Chemistry Mechanism (RACM), and the Modal Aerosol Dynamics Model for Europe (MADE) with a volatility basis set (VBS) secondary aerosol module. Overall, model performance is comparable to contemporary modeling efforts used for regulatory and health-effects analysis, with an annual average daytime ozone (O3) mean fractional bias (MFB) of 12%more » and an annual average fine particulate matter (PM2.5) MFB of −1%. WRF-Chem, as configured here, tends to overpredict total PM2.5 at some high concentration locations and generally overpredicts average 24 h O3 concentrations. Performance is better at predicting daytime-average and daily peak O3 concentrations, which are more relevant for regulatory and health effects analyses relative to annual average values. Predictive performance for PM2.5 subspecies is mixed: the model overpredicts particulate sulfate (MFB = 36%), underpredicts particulate nitrate (MFB = −110%) and organic carbon (MFB = −29%), and relatively accurately predicts particulate ammonium (MFB = 3%) and elemental carbon (MFB = 3%), so that the accuracy in total PM2.5 predictions is to some extent a function of offsetting over- and underpredictions of PM2.5 subspecies. Model predictive performance for PM2.5 and its subspecies is in general worse in winter and in the western US than in other seasons and regions, suggesting spatial and temporal opportunities for future WRF-Chem model development and evaluation.« less

  3. Twelve-month, 12 km resolution North American WRF-Chem v3.4 air quality simulation: performance evaluation

    DOE PAGESBeta

    Tessum, C. W.; Hill, J. D.; Marshall, J. D.

    2014-12-02

    We present results from and evaluate the performance of a 12 month, 12 km horizontal resolution air pollution simulation for the contiguous United States using the WRF-Chem (Weather Research and Forecasting with Chemistry) meteorology and chemical transport model (CTM). We employ the 2005 US National Emissions Inventory, the Regional Atmospheric Chemistry Mechanism (RACM), and the Modal Aerosol Dynamics Model for Europe (MADE) with a Volatility Basis Set (VBS) secondary aerosol module. Overall, model performance is comparable to contemporary models used for regulatory and health-effects analysis, with an annual average daytime ozone (O3) mean fractional bias (MFB) of 12% and anmore » annual average fine particulate matter (PM2.5) MFB of −1%. WRF-Chem, as configured here, tends to overpredict total PM2.5 at some high concentration locations, and generally overpredicts average 24 h O3 concentrations, with better performance at predicting average daytime and daily peak O3 concentrations. Predictive performance for PM2.5 subspecies is mixed: the model overpredicts particulate sulfate (MFB = 65%), underpredicts particulate nitrate (MFB = −110%) and organic carbon (MFB = −65%), and relatively accurately predicts particulate ammonium (MFB = 3%) and elemental carbon (MFB = 3%), so that the accuracy in total PM2.5 predictions is to some extent a function of offsetting over- and underpredictions of PM2.5 subspecies. Model predictive performance for PM2.5 and its subspecies is in general worse in winter and in the western US than in other seasons and regions, suggesting spatial and temporal opportunities for future WRF-Chem model development and evaluation.« less

  4. Twelve-month, 12 km resolution North American WRF-Chem v3.4 air quality simulation: performance evaluation

    NASA Astrophysics Data System (ADS)

    Tessum, C. W.; Hill, J. D.; Marshall, J. D.

    2015-04-01

    We present results from and evaluate the performance of a 12-month, 12 km horizontal resolution year 2005 air pollution simulation for the contiguous United States using the WRF-Chem (Weather Research and Forecasting with Chemistry) meteorology and chemical transport model (CTM). We employ the 2005 US National Emissions Inventory, the Regional Atmospheric Chemistry Mechanism (RACM), and the Modal Aerosol Dynamics Model for Europe (MADE) with a volatility basis set (VBS) secondary aerosol module. Overall, model performance is comparable to contemporary modeling efforts used for regulatory and health-effects analysis, with an annual average daytime ozone (O3) mean fractional bias (MFB) of 12% and an annual average fine particulate matter (PM2.5) MFB of -1%. WRF-Chem, as configured here, tends to overpredict total PM2.5 at some high concentration locations and generally overpredicts average 24 h O3 concentrations. Performance is better at predicting daytime-average and daily peak O3 concentrations, which are more relevant for regulatory and health effects analyses relative to annual average values. Predictive performance for PM2.5 subspecies is mixed: the model overpredicts particulate sulfate (MFB = 36%), underpredicts particulate nitrate (MFB = -110%) and organic carbon (MFB = -29%), and relatively accurately predicts particulate ammonium (MFB = 3%) and elemental carbon (MFB = 3%), so that the accuracy in total PM2.5 predictions is to some extent a function of offsetting over- and underpredictions of PM2.5 subspecies. Model predictive performance for PM2.5 and its subspecies is in general worse in winter and in the western US than in other seasons and regions, suggesting spatial and temporal opportunities for future WRF-Chem model development and evaluation.

  5. Twelve-month, 12 km resolution North American WRF-Chem v3.4 air quality simulation: performance evaluation

    NASA Astrophysics Data System (ADS)

    Tessum, C. W.; Hill, J. D.; Marshall, J. D.

    2014-12-01

    We present results from and evaluate the performance of a 12 month, 12 km horizontal resolution air pollution simulation for the contiguous United States using the WRF-Chem (Weather Research and Forecasting with Chemistry) meteorology and chemical transport model (CTM). We employ the 2005 US National Emissions Inventory, the Regional Atmospheric Chemistry Mechanism (RACM), and the Modal Aerosol Dynamics Model for Europe (MADE) with a Volatility Basis Set (VBS) secondary aerosol module. Overall, model performance is comparable to contemporary models used for regulatory and health-effects analysis, with an annual average daytime ozone (O3) mean fractional bias (MFB) of 12% and an annual average fine particulate matter (PM2.5) MFB of -1%. WRF-Chem, as configured here, tends to overpredict total PM2.5 at some high concentration locations, and generally overpredicts average 24 h O3 concentrations, with better performance at predicting average daytime and daily peak O3 concentrations. Predictive performance for PM2.5 subspecies is mixed: the model overpredicts particulate sulfate (MFB = 65%), underpredicts particulate nitrate (MFB = -110%) and organic carbon (MFB = -65%), and relatively accurately predicts particulate ammonium (MFB = 3%) and elemental carbon (MFB = 3%), so that the accuracy in total PM2.5 predictions is to some extent a function of offsetting over- and underpredictions of PM2.5 subspecies. Model predictive performance for PM2.5 and its subspecies is in general worse in winter and in the western US than in other seasons and regions, suggesting spatial and temporal opportunities for future WRF-Chem model development and evaluation.

  6. Three-dimensional structure and origin of a 1.8 km thick ice dome within Korolev Crater, Mars

    NASA Astrophysics Data System (ADS)

    Brothers, T. Charles; Holt, John W.

    2016-02-01

    Korolev is an 80 km diameter impact crater located at 72.7°N, 164.5°E containing a large domed deposit. Perennial water ice is thought to be currently unstable there; however, using a 3-D analysis of the dome's internal radar stratigraphy, we estimate that Korolev's central mound contains between 1400 and 3500 km3 of water ice that is up to 1.8 km thick. Furthermore, the stratigraphic structure of this ice dome is strikingly similar to the north polar layered deposits (NPLD) on Planum Boreum, approximately 600 km to the north. Additionally, our stratigraphic analysis suggests that Korolev ice was not previously part of a once larger polar ice sheet but rather it was deposited locally. We conclude that Korolev Crater's ice likely deposited during the same climate regime as Planum Boreum's NPLD, but independently. This implies that the incorporation of circumpolar ice deposits such as Korolev may prove useful in reconstructing a unique Mars polar climate history.

  7. 3,4-Dimethylphenol

    Integrated Risk Information System (IRIS)

    3,4 - Dimethylphenol ; CASRN 95 - 65 - 8 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarcinogen

  8. 3.4 Radiotherapy

    NASA Astrophysics Data System (ADS)

    Kramer, H.-M.; Selbach, H.-J.; Vatnitsky, S.

    This document is part of Subvolume A 'Fundamentals and Data in Radiobiology, Radiation Biophysics, Dosimetry and Medical Radiological Protection' of Volume 7 'Medical Radiological Physics' of Landolt-Börnstein - Group VIII 'Advanced Materials and Technologies'. It contains the Section '3.4 Radiotherapy' of the Chapter '3 Dosimetry in Diagnostic Radiology and Radiotherapy' with the contents:

  9. KM3NeT

    NASA Astrophysics Data System (ADS)

    de Jong, M.

    2015-07-01

    KM3NeT is a large research infrastructure, that will consist of a network of deep-sea neutrino telescopes in the Mediterranean Sea. The main objective of KM3NeT is the discovery and subsequent observation of high-energy neutrino sources in the Universe. A further physics perspective is the measurement of the mass hierarchy of neutrinos. A corresponding study, ORCA, is ongoing within KM3NeT. A cost effective technology for (very) large water Cherenkov detectors has been developed based on a new generation of low price 3-inch photo-multiplier tubes. Following the successful deployment and operation of two prototypes, the construction of the KM3NeT research infrastructure has started. The prospects of the different phases of the implementation of KM3NeT are summarised.

  10. KM3NeT

    SciTech Connect

    Jong, M. de; Collaboration: KM3NeT Collaboration

    2015-07-15

    KM3NeT is a large research infrastructure, that will consist of a network of deep-sea neutrino telescopes in the Mediterranean Sea. The main objective of KM3NeT is the discovery and subsequent observation of high-energy neutrino sources in the Universe. A further physics perspective is the measurement of the mass hierarchy of neutrinos. A corresponding study, ORCA, is ongoing within KM3NeT. A cost effective technology for (very) large water Cherenkov detectors has been developed based on a new generation of low price 3-inch photo-multiplier tubes. Following the successful deployment and operation of two prototypes, the construction of the KM3NeT research infrastructure has started. The prospects of the different phases of the implementation of KM3NeT are summarised.

  11. Plan Turbines 3 & 4, Side View Turbines ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Plan - Turbines 3 & 4, Side View - Turbines 3 & 4, Section A-A - American Falls Water, Power & Light Company, Island Power Plant, Snake River, below American Falls Dam, American Falls, Power County, ID

  12. Imaging Resolution of the 410-km and 660-km Discontinuities

    NASA Astrophysics Data System (ADS)

    Deng, K.; Zhou, Y.

    2014-12-01

    Structure of seismic discontinuities at depths of about 410 km and 660 km provides important constraints on mantle convection as the associated phase transformations in the transition zone are sensitive to thermal perturbations. Teleseismic P-to-S receiver functions have been widely used to map the depths of the two discontinuities. In this study, we investigate the resolution of receiver functions in imaging topographic variations of the 410-km and 660-km discontinuities based on wave propagation simulations using the Spectral Element Method (SEM). We investigate finite-frequency effects of direct P waves as well as P-to-S converted waves by varying the length scale of discontinuity topography in the transition zone. We show that wavefront healing effects are significant in broadband receiver functions. For example, at a period of 10 to 20 seconds, the arrival anomaly in P-to-S converted waves is about 50% of what predicted by ray theory when the topography length scale is in the order of 400 km. The observed arrival anomaly further reduces to 10-20% when the topography length scale reduces to about 200 km. We calculate 2-D boundary sensitivity kernels for direct P waves as well as receiver functions based on surface wave mode summation and confirm that finite frequency-effects can be properly accounted for. Three-dimensional wavespeed structure beneath seismic stations can also introduce significant artifacts in transition zone discontinuity topography if time corrections are not applied, and, the effects are dependent on frequency.

  13. 38 CFR 3.4 - Compensation.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 1 2013-07-01 2013-07-01 false Compensation. 3.4 Section 3.4 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS ADJUDICATION Pension, Compensation, and Dependency and Indemnity Compensation General § 3.4 Compensation. (a) Compensation. This term means a monthly payment made by...

  14. Knob manager (KM) operators guide

    SciTech Connect

    1993-10-08

    KM, Knob Manager, is a tool which enables the user to use the SUNDIALS knob box to adjust the settings of the control system. The followings are some features of KM: dynamic knob assignments with the user friendly interface; user-defined gain for individual knob; graphical displays for operating range and status of each process variable is assigned; backup and restore one or multiple process variable; save current settings to a file and recall the settings from that file in future.

  15. 43 CFR 3453.3-4 - Extensions.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 43 Public Lands: Interior 2 2012-10-01 2012-10-01 false Extensions. 3453.3-4 Section 3453.3-4 Public Lands: Interior Regulations Relating to Public Lands (Continued) BUREAU OF LAND MANAGEMENT, DEPARTMENT OF THE INTERIOR MINERALS MANAGEMENT (3000) MANAGEMENT OF EXISTING LEASES Transfers by...

  16. 43 CFR 3453.3-4 - Extensions.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 43 Public Lands: Interior 2 2011-10-01 2011-10-01 false Extensions. 3453.3-4 Section 3453.3-4 Public Lands: Interior Regulations Relating to Public Lands (Continued) BUREAU OF LAND MANAGEMENT, DEPARTMENT OF THE INTERIOR MINERALS MANAGEMENT (3000) MANAGEMENT OF EXISTING LEASES Transfers by...

  17. 43 CFR 3453.3-4 - Extensions.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 43 Public Lands: Interior 2 2013-10-01 2013-10-01 false Extensions. 3453.3-4 Section 3453.3-4 Public Lands: Interior Regulations Relating to Public Lands (Continued) BUREAU OF LAND MANAGEMENT, DEPARTMENT OF THE INTERIOR MINERALS MANAGEMENT (3000) MANAGEMENT OF EXISTING LEASES Transfers by...

  18. 43 CFR 3453.3-4 - Extensions.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 43 Public Lands: Interior 2 2014-10-01 2014-10-01 false Extensions. 3453.3-4 Section 3453.3-4 Public Lands: Interior Regulations Relating to Public Lands (Continued) BUREAU OF LAND MANAGEMENT, DEPARTMENT OF THE INTERIOR MINERALS MANAGEMENT (3000) MANAGEMENT OF EXISTING LEASES Transfers by...

  19. Possible identification of a cluster of galaxies at redshift z = 3.4

    NASA Technical Reports Server (NTRS)

    Giavalisco, Mauro; Steidel, Charles C.; Szalay, Alexander S.

    1994-01-01

    We report the possible detection of a cluster of 16 radio-quiet galaxies at z = 3.4, identified in the field around the optically thick absorption system toward Q0000-263 at z(sub abs) = 3.390. Two of them, a Lyman alpha emitter at z = 3.428 and the galaxy responsible for the absorption system, have redshifts spectroscopically confirmed. The other 14 galaxies identified using a multicolor imaging technique designed to detect sources in the redshift interval 3 approximately less than z approximately less than 3.5 which are characterized by a Lyman discontinuity in an otherwise flat spectrum, have broad-band spectral energy distributions identical to the two galaxies with known redshift. They are spatially distributed in two apparent clumps, around the damped absorber and the Lyman alpha galaxy, respectively. A clustering analysis excludes with 98.8% confidence that this association is a realization of a Poissonian distribution and confirms that the observed clumps are real. The implications are that the 16 galaxies are members of a cluster at z approximately equals 3.4, by far the most distant ever detected. An estimate of the mass bounded in stars of this cluster is 3 x 10(exp 12) solar mass (q(sub 0) = 0 and H(sub 0) = 50 km/s/Mpc throughout this Letter), while the total mass (baryonic + dark) is 6 x 10(exp 14) solar mass. We also estimate that at z = 3.4 the correlation length is 2.2 Mpc, which, compared to the present value of 11 Mpc, suggests that the clustering evolution is still close to the linear regime.

  20. Whipple bumper shield tests at over 10 km/s

    SciTech Connect

    Chhabildas, L.C.; Hertel, E.S. ); Hill, S.A. . George C. Marshall Space Flight Center)

    1991-01-01

    A series of experiments has been performed on the the Sandia HyperVelocity Launcher (HVL) to evaluate the effectiveness of a thin Whipple bumper shield at impact velocities up to 10.5 km/s by orbital space debris. Upon impact by an 0.67gm (0.87 mm thick) flier plate the thin aluminum bumper shield completely disintegrates into a debris cloud. The debris cloud front propagates axially at velocities in excess of 14 km/s and expands radially at a velocity of {approximately}7 km/s. Subsequent loading on a 3.2 mm thick aluminum substructure by the debris cloud penetrates the substructure completely. 8 refs., 4 figs.

  1. 32 CFR 3.4 - Definitions.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ..., GRANTS, OR COOPERATIVE AGREEMENTS FOR PROTOTYPE PROJECTS § 3.4 Definitions. Agency point of contact (POC). The individual identified by the military department or defense agency as its POC for prototype OTs... of a Defense Agency which has been delegated contracting authority through its agency...

  2. 32 CFR 3.4 - Definitions.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ..., GRANTS, OR COOPERATIVE AGREEMENTS FOR PROTOTYPE PROJECTS § 3.4 Definitions. Agency point of contact (POC). The individual identified by the military department or defense agency as its POC for prototype OTs... of a Defense Agency which has been delegated contracting authority through its agency...

  3. 32 CFR 3.4 - Definitions.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ..., GRANTS, OR COOPERATIVE AGREEMENTS FOR PROTOTYPE PROJECTS § 3.4 Definitions. Agency point of contact (POC). The individual identified by the military department or defense agency as its POC for prototype OTs... of a Defense Agency which has been delegated contracting authority through its agency...

  4. 2,3,4,6-Tetrachlorophenol

    Integrated Risk Information System (IRIS)

    2,3,4,6 - Tetrachlorophenol ; CASRN 58 - 90 - 2 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncar

  5. Career Education Guide: (3-4).

    ERIC Educational Resources Information Center

    Peterson, Marla; And Others

    One of a series of guides developed under the K-6 Teacher and Counselor Competencies in Career Education Program, this guide contains a section for each of the Grades 3-4 levels (Third Experience Level and Fourth Experience Level), each encompassing the two career education components: Subject Matter Areas (to reinforce science, language arts,…

  6. The metabolite 3,4,3',4'-tetrachloroazobenzene (TCAB) exerts a higher ecotoxicity than the parent compounds 3,4-dichloroaniline (3,4-DCA) and propanil.

    PubMed

    Xiao, Hongxia; Kuckelkorn, Jochen; Nüßer, Leonie Katharina; Floehr, Tilman; Hennig, Michael Patrick; Roß-Nickoll, Martina; Schäffer, Andreas; Hollert, Henner

    2016-05-01

    3,4,3',4'-tetrachloroazobenzene (TCAB) is not commercially manufactured but formed as an unwanted by-product in the manufacturing of 3,4-dichloroaniline (3,4-DCA) or metabolized from the degradation of chloranilide herbicides, like propanil. While a considerable amount of research has been done concerning the toxicological and ecotoxicological effects of propanil and 3,4-DCA, limited information is available on TCAB. Our study examined the toxicity of TCAB in comparison to its parent compounds propanil and 3,4-DCA, using a battery of bioassays including in vitro with aryl hydrocarbon receptor (AhR) mediated activity by the 7-ethoxyresorufin-O-deethylase (EROD) assay and micro-EROD, endocrine-disrupting activity with chemically activated luciferase gene expression (CALUX) as well as in vivo with fish embryo toxicity (FET) assays with Danio rerio. Moreover, the quantitative structure activity response (QSAR) concepts were applied to simulate the binding affinity of TCAB to certain human receptors. It was shown that TCAB has a strong binding affinity to the AhR in EROD and micro-EROD induction assay, with the toxic equivalency factor (TEF) of 8.7×10(-4) and 1.2×10(-5), respectively. TCAB presented to be a weak endocrine disrupting compound with a value of estradiol equivalence factor (EEF) of 6.4×10(-9) and dihydrotestosterone equivalency factor (DEF) of 1.1×10(-10). No acute lethal effects of TCAB were discovered in FET test after 96h of exposure. Major sub-lethal effects detected were heart oedema, yolk malformation, as well as absence of blood flow and tail deformation. QSAR modelling suggested an elevated risk to environment, particularly with respect to binding to the AhR. An adverse effect potentially triggering ERβ, mineralocorticoid, glucocorticoid and progesterone receptor activities might be expected. Altogether, the results obtained suggest that TCAB exerts a higher toxicity than both propanil and 3,4-DCA. This should be considered when assessing the

  7. Thick Toenails

    MedlinePlus

    ... be seen in individuals with nail fungus (onychomycosis), psoriasis, and hypothyroidism. Those who have problems with the thickness of their toenails should consult a foot and ankle surgeon for proper diagnosis and treatment. and or or and or or, browse by ...

  8. Peregrine 100-km Sounding Rocket Project

    NASA Technical Reports Server (NTRS)

    Zilliac, Gregory

    2012-01-01

    The Peregrine Sounding Rocket Program is a joint basic research program of NASA Ames Research Center, NASA Wallops, Stanford University, and the Space Propulsion Group, Inc. (SPG). The goal is to determine the applicability of this technology to a small launch system. The approach is to design, build, and fly a stable, efficient liquefying fuel hybrid rocket vehicle to an altitude of 100 km. The program was kicked off in October of 2006 and has seen considerable progress in the subsequent 18 months. This research group began studying liquifying hybrid rocket fuel technology more than a decade ago. The overall goal of the research was to gain a better understanding of the fundamental physics of the liquid layer entrainment process responsible for the large increase in regression rate observed in these fuels, and to demonstrate the effect of increased regression rate on hybrid rocket motor performance. At the time of this reporting, more than 400 motor tests were conducted with a variety of oxidizers (N2O, GOx, LOx) at ever increasing scales with thrust levels from 5 to over 15,000 pounds (22 N to over 66 kN) in order to move this technology from the laboratory to practical applications. The Peregrine program is the natural next step in this development. A number of small sounding rockets with diameters of 3, 4, and 6 in. (7.6, 10.2, and 15.2 cm) have been flown, but Peregrine at a diameter of 15 in. (38.1 cm) and 14,000-lb (62.3-kN) thrust is by far the largest system ever attempted and will be one of the largest hybrids ever flown. Successful Peregrine flights will set the stage for a wide range of applications of this technology.

  9. Detection of the structure near the 410 km and 660 km discontinuities in Japan subduction zone from the waveform triplication

    NASA Astrophysics Data System (ADS)

    Cui, H.; Zhou, Y.

    2015-12-01

    Slab subduction plays an important role in the mantle material circulation [Stern, 2002], and can also affect the feature of the 410 km and 660 km seismic discontinuities (410 and 660) [Lebedev et al., 2002]. Japan subduction zone is a natural laboratory for studying the mantle composition and velocity structure associated with the deep subduction of the Pacific plate. In this study, triplicated waveforms of an intermediate-depth earthquake at the Hokkaido of Japan (2011/10/21, 08:02:37.62, 142.5315°E, 43.8729°N, Mb6.0, relocated depth: 188 km) are retrieved from the dense Chinese Digital Seismic Network (CDSN). P and S waveforms are filtered with the band of 0.05-1.0 Hz and 0.02-0.5 Hz, respectively, and then integrated into the displacement data. The relative traveltime and synthetic waveform fitting is applied to mapping the deep structure. The best fitting models are obtained through the trial and error tests. We find a 15 km uplift of the 410 and a 25 km depression of the 660, indicating the cold environment caused by the subduction slab; both the 410 and 660 show the sharp discontinuity, but a smaller velocity contrast than the IASP91 model [Kennett and Engdahl, 1991]. Atop the 410 and 660, there are high-velocity layers associated with the subduction (or stagnant) slab. We also find a low-velocity anomaly with the thickness of ~65 km below the 660, which may relate to the slab dehydration or the hot upwelling at the top of the lower mantle. The seismic velocity ratio (VP/VS) shows a lower zone at the depth of ~210-395 km, showing the consistency with the low Poisson's ratio signature of the oceanic plate; a higher zone at the depth of ~560-685 km, implying the hydrous mantle transition zone.

  10. The KM3NeT Digital Optical Module

    NASA Astrophysics Data System (ADS)

    Vivolo, Daniele

    2016-04-01

    KM3NeT is a European deep-sea multidisciplinary research infrastructure in the Mediterranean Sea. It will host a km3-scale neutrino telescope and dedicated instruments for long-term and continuous measurements for Earth and Sea sciences. The KM3NeT neutrino telescope is a 3-dimensional array of Digital Optical Modules, suspended in the sea by means of vertical string structures, called Detection Units, supported by two pre-stretched Dyneema ropes, anchored to the seabed and kept taut with a system of buoys. The Digital Optical Module represents the active part of the neutrino telescope. It is composed by a 17-inch, 14 mm thick borosilicate glass (Vitrovex) spheric vessel housing 31 photomultiplier tubes with 3-inch photocathode diameter and the associated front-end and readout electronics. The technical solution adopted for the KM3NeT optical modules is characterized by an innovative design, considering that existing neutrino telescopes, Baikal, IceCube and ANTARES, all use large photomultipliers, typically with a diameter of 8″ or 10″. It offers several advantages: higher sensitive surface (1260 cm2), weaker sensitivity to Earth's magnetic field, better distinction between single-photon and multi-photon events (photon counting) and directional information with an almost isotropic field of view. In this contribution the design and the performance of the KM3NeT Digital Optical Modules are discussed, with a particular focus on enabling technologies and integration procedure.

  11. Fatal intoxication from 3,4-methylenedioxyamphetamine.

    PubMed

    Poklis, A; Mackell, M A; Drake, W K

    1979-01-01

    The symptoms of MDA intoxication exhibited by the decedent prior to death closely mimic those of acute amphetamine poisoning: profuse sweating, violent and irrational behavior, and stereotypically compulsive behavior. Therefore, if amphetamines are not detected in specimens from a person displaying classic symptoms of amphetamine poisoning, hallucinogenic amphetamine derivatives may be considered. In the case described, a divided dose of 850 mg of MDA ingested within 2 h and 15 min was sufficient to cause the death of a 24-year-old male, 4 h after the final dose. While the methaqualone may have contributed to the demise of the decedent, the authors think that the MDA itself was sufficient to cause death. Results of limited recovery studies of MDA extraction from blood and elution from TLC plates supported the observations of Cimbura [13]. Approximately 85% of MDA is extracted by the method described and its elution from TLC plates is quantitative. This case points out once again the dangers of false advertising in the illicit market. The decedent, himself a dealer in the illicit drug market, and all present at the party believed the ingested white powder to be a mixture of morphine, LSD, and amphetamine, hence MDA. They were totally unfamiliar with 3,4-methylenedioxyamphetamine, MDA. PMID:512617

  12. MAPPING THE ASYMMETRIC THICK DISK. III. THE KINEMATICS AND INTERACTION WITH THE GALACTIC BAR

    SciTech Connect

    Humphreys, Roberta M.; Grammer, Skyler; Davidson, Kris; Beers, Timothy C.; Lee, Young Sun; Cabanela, Juan E.; Larsen, Jeffrey A. E-mail: grammer@astro.umn.edu E-mail: beers@pa.msu.edu E-mail: cabanela@mnstate.edu

    2011-04-15

    In the first two papers of this series, Larsen et al. describe our faint CCD survey in the inner Galaxy and map the overdensity of thick disk stars in Quadrant 1 (Q1) to 5 kpc or more along the line of sight. The regions showing the strongest excess are above the density contours of the bar in the Galactic disk. In this third paper on the asymmetric thick disk, we report on radial velocities and derived metallicity parameters for over 4000 stars in Q1, above and below the plane, and in Quadrant 4 (Q4) above the plane. We confirm the corresponding kinematic asymmetry first reported by Parker et al., extended to greater distances and with more spatial coverage. The thick disk stars in Q1 have a rotational lag of 60-70 km s{sup -1} relative to circular rotation, and the metal-weak thick disk stars have an even greater lag of 100 km s{sup -1}. Both lag their corresponding populations in Q4 by {approx}30 km s{sup -1}. Interestingly, the disk stars in Q1 also appear to participate in the rotational lag by about 30 km s{sup -1}. The enhanced rotational lag for the thick disk in Q1 extends to 4 kpc or more from the Sun. At 3-4 kpc, our sight lines extend above the density contours on the near side of the bar, and as our lines of sight pass directly over the bar the rotational lag appears to decrease. This is consistent with a 'gravitational wake' induced by the rotating bar in the disk which would trap and pile up stars behind it. We conclude that a dynamical interaction with the stellar bar is the most probable explanation for the observed kinematic and spatial asymmetries.

  13. Phosphonic analogues of tyrosine and 3,4-dihydroxyphenylalanine (dopa) influence mushroom tyrosinase activity.

    PubMed Central

    Lejczak, B; Kafarski, P; Makowiecka, E

    1987-01-01

    A series of phosphonic analogues of tyrosine and 3,4-dihydroxyphenylalanine (dopa) were synthesized in order to study their interaction with mushroom tyrosinase. 1-Amino-2-(3,4-dihydroxyphenyl)ethylphosphonic acid and 1-amino-2-(3,4-dimethoxyphenyl)ethylphosphonic acid turned out to be substrates for mushroom tyrosinase with Km values of 3.3 mM and 9.3 mM respectively. Shortening of the alkyl chain by one methylene group gave amino-(3,4-dihydroxyphenyl)methylphosphonic acid, one of the most powerful known inhibitors of this enzyme. This compound, racemic as well as in its optically active forms, exerts a mixed type of inhibition with an affinity for the enzyme one order of magnitude greater than that of the natural substrate. PMID:3109385

  14. Rifting Thick Lithosphere - Canning Basin, Western Australia

    NASA Astrophysics Data System (ADS)

    Czarnota, Karol; White, Nicky

    2016-04-01

    The subsidence histories and architecture of most, but not all, rift basins are elegantly explained by extension of ~120 km thick lithosphere followed by thermal re-thickening of the lithospheric mantle to its pre-rift thickness. Although this well-established model underpins most basin analysis, it is unclear whether the model explains the subsidence of rift basins developed over substantially thick lithosphere (as imaged by seismic tomography beneath substantial portions of the continents). The Canning Basin of Western Australia is an example where a rift basin putatively overlies lithosphere ≥180 km thick, imaged using shear wave tomography. Subsidence modelling in this study shows that the entire subsidence history of the <300 km wide and <6 km thick western Canning Basin is adequately explained by mild Ordovician extension (β≈1.2) of ~120 km thick lithosphere followed by post-rift thermal subsidence. This is consistent with the established model, described above, albeit with perturbations due to transient dynamic topography support which are expressed as basin-wide unconformities. In contrast the <150 km wide and ~15 km thick Fitzroy Trough of the eastern Canning Basin reveals an almost continuous period of normal faulting between the Ordovician and Carboniferous (β<2.0) followed by negligible post-rift thermal subsidence. These features cannot be readily explained by the established model of rift basin development. We attribute the difference in basin architecture between the western and eastern Canning Basin to rifting of thick lithosphere beneath the eastern part, verified by the presence of ~20 Ma diamond-bearing lamproites intruded into the basin depocentre. In order to account for the observed subsidence, at standard crustal densities, the lithospheric mantle is required to be depleted in density by 50-70 kg m-3, which is in line with estimates derived from modelling rare-earth element concentrations of the ~20 Ma lamproites and global isostatic

  15. 3,4-methylenedioxymethamphetamine (MDMA): current perspectives

    PubMed Central

    Meyer, Jerrold S

    2013-01-01

    Ecstasy is a widely used recreational drug that usually consists primarily of 3,4-methylenedioxymethamphetamine (MDMA). Most ecstasy users consume other substances as well, which complicates the interpretation of research in this field. The positively rated effects of MDMA consumption include euphoria, arousal, enhanced mood, increased sociability, and heightened perceptions; some common adverse reactions are nausea, headache, tachycardia, bruxism, and trismus. Lowering of mood is an aftereffect that is sometimes reported from 2 to 5 days after a session of ecstasy use. The acute effects of MDMA in ecstasy users have been attributed primarily to increased release and inhibited reuptake of serotonin (5-HT) and norepinephrine, along with possible release of the neuropeptide oxytocin. Repeated or high-dose MDMA/ecstasy use has been associated with tolerance, depressive symptomatology, and persisting cognitive deficits, particularly in memory tests. Animal studies have demonstrated that high doses of MDMA can lead to long-term decreases in forebrain 5-HT concentrations, tryptophan hydroxylase activity, serotonin transporter (SERT) expression, and visualization of axons immunoreactive for 5-HT or SERT. These neurotoxic effects may reflect either a drug-induced degeneration of serotonergic fibers or a long-lasting downregulation in 5-HT and SERT biosynthesis. Possible neurotoxicity in heavy ecstasy users has been revealed by neuroimaging studies showing reduced SERT binding and increased 5-HT2A receptor binding in several cortical and/or subcortical areas. MDMA overdose or use with certain other drugs can also cause severe morbidity and even death. Repeated use of MDMA may lead to dose escalation and the development of dependence, although such dependence is usually not as profound as is seen with many other drugs of abuse. MDMA/ecstasy-dependent patients are treated with standard addiction programs, since there are no specific programs for this substance and no proven

  16. Neutral Wind Observations below 200 km altitudes

    NASA Astrophysics Data System (ADS)

    Watanabe, S.; Abe, T.; Habu, H.; Kakinami, Y.; Larsen, M. F.; Pfaff, R. F., Jr.; Yamamoto, M.

    2015-12-01

    Neutral Wind Observations below 200 km altitudesS. Watanabe1, T. Abe2, H. Habu2, Y. Kakinami3, M. Larsen4, R. Pfaff5, M. Yamamoto6, M-Y. Yamamoto31Hokkaido University/Hokkaido Information University, 2JAXA/ISAS, 3Kochi University of Technology, 4Clemson University, 5NASA/Goddard Space Flight Center, 6Kyoto University, Neutral wind in the thermosphere is one of the key parameters to understand the ionosphere-thermosphere coupling process. JAXA/ISAS successfully launched sounding rockets from Uchinoura Space Center (USC) on September 2, 2007, January 12, 2012, and July 20, 2013, and NASA launched sounding rockets from Kwajalein on May 7, 2013 and from Wallops on July 4, 2013. The rockets installed Lithium and/or TMA canisters as well as instruments for plasma and electric and magnetic fields. The atomic Lithium gases were released at altitudes between 150 km and 300 km in the evening on September 2, 2007, at altitude of ~100 km in the morning on January 12, 2012, at altitude of ~120km in the midnight on July 20, 2013, at altitude between 150 km and 300 km in the evening on May 7, 2013 and at altitude of ~150 km in the noon on July 4, 2013. The Lithium atoms were scattering sunlight by resonance scattering with wavelength of 670nm. However, the Lithium atoms scattered moon light on July 20, 2013. The moon light scattering is the first time to use for thermospheric wind measurement in the midnight. The Lithium clouds/trails and TMA trails showed clearly the neutral wind shears and atmospheric waves at ~150 km altitude in the lower thermosphere for all local time.

  17. News from KM3NeT

    SciTech Connect

    Katz, Ulrich F.; Collaboration: KM3NeT Collaboration

    2014-11-18

    KM3NeT is a future research infrastructure in the Mediterranean Sea, hosting a multi-cubic-kilometre neutrino telescope and nodes for Earth and Sea sciences. In this report we shortly summarise the genesis of the KM3NeT project and present key elements of its technical design. The physics objectives of the KM3NeT neutrino telescope and some selected sensitivity estimates are discussed. Finally, some first results from prototype operations and the next steps towards implementation – in particular the first construction phase in 2014/15 – are described.

  18. Status of KM3NeT

    NASA Astrophysics Data System (ADS)

    Riccobene, G.

    2016-07-01

    The recent observation of cosmic neutrinos by IceCube has pushed the quest towards the identification of cosmic sources of high-energy particles. The KM3NeT Collaboration is now ready to launch the massive construction of detection units to be installed in deep sea to build a km-cubic size neutrino telescope. The main elements of the detector, the status of the project and the expected perfomances are briefly reported.

  19. 21 CFR 3.4 - Designated agency component.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Designated agency component. 3.4 Section 3.4 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL PRODUCT JURISDICTION Assignment of Agency Component for Review of Premarket Applications § 3.4 Designated...

  20. 10 CFR 960.3-4 - Environmental impacts.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 4 2014-01-01 2014-01-01 false Environmental impacts. 960.3-4 Section 960.3-4 Energy... REPOSITORY Implementation Guidelines § 960.3-4 Environmental impacts. Environmental impacts shall be... process. The DOE shall mitigate significant adverse environmental impacts, to the extent...

  1. 10 CFR 960.3-4 - Environmental impacts.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 4 2012-01-01 2012-01-01 false Environmental impacts. 960.3-4 Section 960.3-4 Energy... REPOSITORY Implementation Guidelines § 960.3-4 Environmental impacts. Environmental impacts shall be... process. The DOE shall mitigate significant adverse environmental impacts, to the extent...

  2. 10 CFR 960.3-4 - Environmental impacts.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 4 2013-01-01 2013-01-01 false Environmental impacts. 960.3-4 Section 960.3-4 Energy... REPOSITORY Implementation Guidelines § 960.3-4 Environmental impacts. Environmental impacts shall be... process. The DOE shall mitigate significant adverse environmental impacts, to the extent...

  3. 40 CFR 257.3-4 - Ground water.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... to sewage sludge that is not used or disposed through a practice regulated in 40 CFR part 503 may... 40 Protection of Environment 25 2011-07-01 2011-07-01 false Ground water. 257.3-4 Section 257.3-4... and Practices § 257.3-4 Ground water. (a) A facility or practice shall not contaminate an...

  4. 40 CFR 257.3-4 - Ground water.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... to sewage sludge that is not used or disposed through a practice regulated in 40 CFR part 503 may... 40 Protection of Environment 26 2012-07-01 2011-07-01 true Ground water. 257.3-4 Section 257.3-4... and Practices § 257.3-4 Ground water. (a) A facility or practice shall not contaminate an...

  5. 40 CFR 257.3-4 - Ground water.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... to sewage sludge that is not used or disposed through a practice regulated in 40 CFR part 503 may... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Ground water. 257.3-4 Section 257.3-4... and Practices § 257.3-4 Ground water. (a) A facility or practice shall not contaminate an...

  6. 40 CFR 257.3-4 - Ground water.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... to sewage sludge that is not used or disposed through a practice regulated in 40 CFR part 503 may... 40 Protection of Environment 26 2013-07-01 2013-07-01 false Ground water. 257.3-4 Section 257.3-4... and Practices § 257.3-4 Ground water. (a) A facility or practice shall not contaminate an...

  7. 40 CFR 257.3-4 - Ground water.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... to sewage sludge that is not used or disposed through a practice regulated in 40 CFR part 503 may... 40 Protection of Environment 25 2014-07-01 2014-07-01 false Ground water. 257.3-4 Section 257.3-4... and Practices § 257.3-4 Ground water. (a) A facility or practice shall not contaminate an...

  8. 41 CFR 51-3.4 - Distribution of orders.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 41 Public Contracts and Property Management 1 2011-07-01 2009-07-01 true Distribution of orders. 51-3.4 Section 51-3.4 Public Contracts and Property Management Other Provisions Relating to Public... § 51-3.4 Distribution of orders. Central nonprofit agencies shall distribute orders from the...

  9. 43 CFR 3.4 - No exclusive permits granted.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 43 Public Lands: Interior 1 2011-10-01 2011-10-01 false No exclusive permits granted. 3.4 Section 3.4 Public Lands: Interior Office of the Secretary of the Interior PRESERVATION OF AMERICAN ANTIQUITIES § 3.4 No exclusive permits granted. No exclusive permits shall be granted for a larger area...

  10. 43 CFR 3.4 - No exclusive permits granted.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 43 Public Lands: Interior 1 2010-10-01 2010-10-01 false No exclusive permits granted. 3.4 Section 3.4 Public Lands: Interior Office of the Secretary of the Interior PRESERVATION OF AMERICAN ANTIQUITIES § 3.4 No exclusive permits granted. No exclusive permits shall be granted for a larger area...

  11. 43 CFR 3.4 - No exclusive permits granted.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 43 Public Lands: Interior 1 2013-10-01 2013-10-01 false No exclusive permits granted. 3.4 Section 3.4 Public Lands: Interior Office of the Secretary of the Interior PRESERVATION OF AMERICAN ANTIQUITIES § 3.4 No exclusive permits granted. No exclusive permits shall be granted for a larger area...

  12. 43 CFR 3.4 - No exclusive permits granted.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 43 Public Lands: Interior 1 2012-10-01 2011-10-01 true No exclusive permits granted. 3.4 Section 3.4 Public Lands: Interior Office of the Secretary of the Interior PRESERVATION OF AMERICAN ANTIQUITIES § 3.4 No exclusive permits granted. No exclusive permits shall be granted for a larger area...

  13. 43 CFR 3.4 - No exclusive permits granted.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 43 Public Lands: Interior 1 2014-10-01 2014-10-01 false No exclusive permits granted. 3.4 Section 3.4 Public Lands: Interior Office of the Secretary of the Interior PRESERVATION OF AMERICAN ANTIQUITIES § 3.4 No exclusive permits granted. No exclusive permits shall be granted for a larger area...

  14. 34 CFR 3.4 - Use of the seal.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 34 Education 1 2013-07-01 2013-07-01 false Use of the seal. 3.4 Section 3.4 Education Office of the Secretary, Department of Education OFFICIAL SEAL § 3.4 Use of the seal. (a) Use by any person or...) Requests by any person or organization outside of the Department for permission to use the Seal must...

  15. 34 CFR 3.4 - Use of the seal.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 34 Education 1 2012-07-01 2012-07-01 false Use of the seal. 3.4 Section 3.4 Education Office of the Secretary, Department of Education OFFICIAL SEAL § 3.4 Use of the seal. (a) Use by any person or...) Requests by any person or organization outside of the Department for permission to use the Seal must...

  16. 34 CFR 3.4 - Use of the seal.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 34 Education 1 2011-07-01 2011-07-01 false Use of the seal. 3.4 Section 3.4 Education Office of the Secretary, Department of Education OFFICIAL SEAL § 3.4 Use of the seal. (a) Use by any person or...) Requests by any person or organization outside of the Department for permission to use the Seal must...

  17. 34 CFR 3.4 - Use of the seal.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 34 Education 1 2014-07-01 2014-07-01 false Use of the seal. 3.4 Section 3.4 Education Office of the Secretary, Department of Education OFFICIAL SEAL § 3.4 Use of the seal. (a) Use by any person or...) Requests by any person or organization outside of the Department for permission to use the Seal must...

  18. 34 CFR 3.4 - Use of the seal.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 34 Education 1 2010-07-01 2010-07-01 false Use of the seal. 3.4 Section 3.4 Education Office of the Secretary, Department of Education OFFICIAL SEAL § 3.4 Use of the seal. (a) Use by any person or...) Requests by any person or organization outside of the Department for permission to use the Seal must...

  19. 7 CFR 3.4 - Delegations of authority.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 1 2010-01-01 2010-01-01 false Delegations of authority. 3.4 Section 3.4 Agriculture Office of the Secretary of Agriculture DEBT MANAGEMENT General § 3.4 Delegations of authority. The head of an agency is authorized to exercise any or all of the functions provided by this part with...

  20. 10 CFR 960.3-4 - Environmental impacts.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 4 2011-01-01 2011-01-01 false Environmental impacts. 960.3-4 Section 960.3-4 Energy... REPOSITORY Implementation Guidelines § 960.3-4 Environmental impacts. Environmental impacts shall be... process. The DOE shall mitigate significant adverse environmental impacts, to the extent...

  1. 10 CFR 960.3-4 - Environmental impacts.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Environmental impacts. 960.3-4 Section 960.3-4 Energy... REPOSITORY Implementation Guidelines § 960.3-4 Environmental impacts. Environmental impacts shall be... process. The DOE shall mitigate significant adverse environmental impacts, to the extent...

  2. 45 CFR 1210.3-4 - Initiation of termination.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 45 Public Welfare 4 2013-10-01 2013-10-01 false Initiation of termination. 1210.3-4 Section 1210.3-4 Public Welfare Regulations Relating to Public Welfare (Continued) CORPORATION FOR NATIONAL AND COMMUNITY SERVICE VISTA TRAINEE DESELECTION AND VOLUNTEER EARLY TERMINATION PROCEDURES VISTA Volunteer Early Termination § 1210.3-4 Initiation...

  3. Origins of the 520-km discontinuity

    NASA Astrophysics Data System (ADS)

    Vinnik, Lev

    2016-04-01

    The 520-km discontinuity is often explained by the phase transition from wadsleyite to ringwoodite, although the theoretical impedance of this transition is so small that the related converted and reflected seismic phases could hardly be seen in the seismograms. At the same time there are numerous reports on observations of a large discontinuity at this depth, especially in the data on SS precursors and P-wave wide-angle reflections. Revenaugh and Jordan (1991) argued that this discontinuity is related to the garnet/post-garnet transformation. Gu et al. (1998) preferred very deep continental roots extending into the transition zone. Deuss and Woodhouse proposed splitting of the 520-km discontinuity into two discontinuities, whilst Bock (1994) denied evidence of the 520-km discontinuity in the SS precursors. Our approach to this problem is based on the analysis of S and P receiver functions. Most of our data are related to hot-spots in and around the Atlantic where the appropriate converted phases are often comparable in amplitude with P410s and S410p. Both S and P receiver functions provide strong evidence of a low S velocity in a depth range from 450 km to 510 km at some locations. The 520-km discontinuity appears to be the base of this low-velocity layer. Our observations of the low S velocity in the upper transition zone are very consistent with the indications of a drop in the solidus temperature of carbonated peridotite in the same pressure range (Keshav et al. 2011), and this phenomenon provides a viable alternative to the other explanations of the 520-km discontinuity.

  4. Km3Net Italy - Seafloor network

    NASA Astrophysics Data System (ADS)

    Papaleo, Riccardo

    2016-04-01

    The KM3NeT European project aims to construct a large volume underwater neutrino telescope in the depths of the Mediterranean Sea. INFN and KM3NeT collaboration, thanks to a dedicated funding of 21.000.000 € (PON 2007-2013), are committed to build and deploy the Phase 1 of the telescope, composed of a network of detection units: 8 towers, equipped with single photomultiplier optical modules, and 24 strings, equipped with multi-photomultipliers optical modules. All the towers and strings are connected to the main electro optical cable by means of a network of junction boxes and electro optical interlink cables. Each junction box is an active node able to provide all the necessary power to the detection units and to guarantee the data transmission between the detector and the on-shore control station. The KM3NeT Italia project foresees the realization and the installation of the first part of the deep sea network, composed of three junction boxes, one for the towers and two for the strings. In July 2015, two junction boxes have been deployed and connected to the new cable termination frame installed during the same sea campaign. The third and last one will be installed in November 2015. The status of the deep sea network is presented together with technical details of the project.

  5. Large Circular Basin - 1300-km diameter

    NASA Technical Reports Server (NTRS)

    1974-01-01

    Close-up view of one-half of a 1300-km diameter circular basin the largest observed on Mercury. The other half is hidden beyond the terminator to the left. Hills and valleys extend in a radial fashion outward from the main ring. Interior of the large basin is completely flooded by plains materials; adjacent lowlands are also partially flooded and superimposed on the plains are bowl shaped craters. Wrinkle ridges are abundant on the plains materials. The area shown is 1008 miles (1600 km) from the top to the bottom of the picture. Sun's illumination is from the right. Blurred linear lines extending across the picture near bottom are missing data lines that have been filled in by the computer. Mariner 10 encountered Mercury on Friday, March 29th, 1974, passing the planet on the darkside 431 miles (690-km) from the surface.

    The Mariner 10 mission, managed by the Jet Propulsion Laboratory for NASA's Office of Space Science, explored Venus in February 1974 on the way to three encounters with Mercury-in March and September 1974 and in March 1975. The spacecraft took more than 7,000 photos of Mercury, Venus, the Earth and the Moon.

    NOTE: This image was scanned from physical media.

  6. Global anisotropy and the thickness of continents.

    PubMed

    Gung, Yuancheng; Panning, Mark; Romanowicz, Barbara

    2003-04-17

    For decades there has been a vigorous debate about the depth extent of continental roots. The analysis of heat-flow, mantle-xenolith and electrical-conductivity data all indicate that the coherent, conductive part of continental roots (the 'tectosphere') is at most 200-250 km thick. Some global seismic tomographic models agree with this estimate, but others suggest that a much thicker zone of high velocities lies beneath continental shields, reaching a depth of at least 400 km. Here we show that this disagreement can be reconciled by taking into account seismic anisotropy. We show that significant radial anisotropy, with horizontally polarized shear waves travelling faster than those that are vertically polarized, is present under most cratons in the depth range 250-400 km--similar to that found under ocean basins at shallower depths of 80-250 km. We propose that, in both cases, the anisotropy is related to shear in a low-viscosity asthenospheric channel, located at different depths under continents and oceans. The seismically defined 'tectosphere' is then at most 200-250 km thick under old continents. The 'Lehmann discontinuity', observed mostly under continents at about 200-250 km, and the 'Gutenberg discontinuity', observed under oceans at depths of about 60-80 km, may both be associated with the bottom of the lithosphere, marking a transition to flow-induced asthenospheric anisotropy. PMID:12700758

  7. 43 CFR 3435.3-4 - Determination of value.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 43 Public Lands: Interior 2 2011-10-01 2011-10-01 false Determination of value. 3435.3-4 Section....3-4 Determination of value. The value of the land to be leased, or added by lease modification, or... applicant and the Secretary, be equal to the estimated fair market value of the lease or lease...

  8. 43 CFR 3435.3-4 - Determination of value.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 43 Public Lands: Interior 2 2012-10-01 2012-10-01 false Determination of value. 3435.3-4 Section....3-4 Determination of value. The value of the land to be leased, or added by lease modification, or... applicant and the Secretary, be equal to the estimated fair market value of the lease or lease...

  9. 43 CFR 3435.3-4 - Determination of value.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 43 Public Lands: Interior 2 2013-10-01 2013-10-01 false Determination of value. 3435.3-4 Section....3-4 Determination of value. The value of the land to be leased, or added by lease modification, or... applicant and the Secretary, be equal to the estimated fair market value of the lease or lease...

  10. 43 CFR 9269.3-4 - Range management.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 43 Public Lands: Interior 2 2013-10-01 2013-10-01 false Range management. 9269.3-4 Section 9269.3-4 Public Lands: Interior Regulations Relating to Public Lands (Continued) BUREAU OF LAND MANAGEMENT... Range management. (a) Grazing administration—exclusive of Alaska—(1) Unlawful enclosures or...

  11. 43 CFR 9269.3-4 - Range management.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 43 Public Lands: Interior 2 2011-10-01 2011-10-01 false Range management. 9269.3-4 Section 9269.3-4 Public Lands: Interior Regulations Relating to Public Lands (Continued) BUREAU OF LAND MANAGEMENT... Range management. (a) Grazing administration—exclusive of Alaska—(1) Unlawful enclosures or...

  12. 43 CFR 9269.3-4 - Range management.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 43 Public Lands: Interior 2 2012-10-01 2012-10-01 false Range management. 9269.3-4 Section 9269.3-4 Public Lands: Interior Regulations Relating to Public Lands (Continued) BUREAU OF LAND MANAGEMENT... Range management. (a) Grazing administration—exclusive of Alaska—(1) Unlawful enclosures or...

  13. 43 CFR 9269.3-4 - Range management.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 43 Public Lands: Interior 2 2014-10-01 2014-10-01 false Range management. 9269.3-4 Section 9269.3-4 Public Lands: Interior Regulations Relating to Public Lands (Continued) BUREAU OF LAND MANAGEMENT... Range management. (a) Grazing administration—exclusive of Alaska—(1) Unlawful enclosures or...

  14. 41 CFR 60-3.4 - Information on impact.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 41 Public Contracts and Property Management 1 2012-07-01 2009-07-01 true Information on impact. 60-3.4 Section 60-3.4 Public Contracts and Property Management Other Provisions Relating to Public... employment practices, (2) where the weight of court decisions or administrative interpretations hold that...

  15. 41 CFR 60-3.4 - Information on impact.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 41 Public Contracts and Property Management 1 2014-07-01 2014-07-01 false Information on impact. 60-3.4 Section 60-3.4 Public Contracts and Property Management Other Provisions Relating to Public... employment practices, (2) where the weight of court decisions or administrative interpretations hold that...

  16. 43 CFR 3400.3-4 - Trust protection lands.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 43 Public Lands: Interior 2 2014-10-01 2014-10-01 false Trust protection lands. 3400.3-4 Section 3400.3-4 Public Lands: Interior Regulations Relating to Public Lands (Continued) BUREAU OF LAND... development of coal deposits held in trust by the United States for Indians. See 43 CFR...

  17. 43 CFR 3400.3-4 - Trust protection lands.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 43 Public Lands: Interior 2 2013-10-01 2013-10-01 false Trust protection lands. 3400.3-4 Section 3400.3-4 Public Lands: Interior Regulations Relating to Public Lands (Continued) BUREAU OF LAND... development of coal deposits held in trust by the United States for Indians. See 43 CFR...

  18. 43 CFR 3400.3-4 - Trust protection lands.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 43 Public Lands: Interior 2 2012-10-01 2012-10-01 false Trust protection lands. 3400.3-4 Section 3400.3-4 Public Lands: Interior Regulations Relating to Public Lands (Continued) BUREAU OF LAND... development of coal deposits held in trust by the United States for Indians. See 43 CFR...

  19. 15 CFR Supplement Nos. 3-4 to Part... - [Reserved

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 15 Commerce and Foreign Trade 2 2010-01-01 2010-01-01 false Nos. Supplement Nos. 3-4 to Part 742 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade (Continued) BUREAU OF... CONTROLS Supplement Nos. 3-4 to Part 742...

  20. 41 CFR 51-3.4 - Distribution of orders.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 41 Public Contracts and Property Management 1 2010-07-01 2010-07-01 true Distribution of orders. 51-3.4 Section 51-3.4 Public Contracts and Property Management Other Provisions Relating to Public Contracts COMMITTEE FOR PURCHASE FROM PEOPLE WHO ARE BLIND OR SEVERELY DISABLED 3-CENTRAL NONPROFIT...

  1. 43 CFR 3742.3-4 - Proof of publication.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 43 Public Lands: Interior 2 2011-10-01 2011-10-01 false Proof of publication. 3742.3-4 Section... DEVELOPMENT Procedures Under the Act § 3742.3-4 Proof of publication. After the period of newspaper publication has expired, the person requesting publication shall obtain from the office of the newspaper...

  2. 43 CFR 3742.3-4 - Proof of publication.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 43 Public Lands: Interior 2 2014-10-01 2014-10-01 false Proof of publication. 3742.3-4 Section... DEVELOPMENT Procedures Under the Act § 3742.3-4 Proof of publication. After the period of newspaper publication has expired, the person requesting publication shall obtain from the office of the newspaper...

  3. Anomalous South Pacific lithosphere dynamics derived from new total sediment thickness estimates off the West Antarctic margin

    NASA Astrophysics Data System (ADS)

    Wobbe, Florian; Lindeque, Ansa; Gohl, Karsten

    2014-12-01

    Paleotopographic models of the West Antarctic margin, which are essential for robust simulations of paleoclimate scenarios, lack information on sediment thickness and geodynamic conditions, resulting in large uncertainties. A new total sediment thickness grid spanning the Ross Sea-Amundsen Sea-Bellingshausen Sea basins is presented and is based on all the available seismic reflection, borehole, and gravity modeling data offshore West Antarctica. This grid was combined with NGDC's global 5 arc minute grid of ocean sediment thickness (Whittaker et al., 2013) and extends the NGDC grid further to the south. Sediment thickness along the West Antarctic margin tends to be 3-4 km larger than previously assumed. The sediment volume in the Bellingshausen, Amundsen, and Ross Sea basins amounts to 3.61, 3.58, and 2.78 million km3, respectively. The residual basement topography of the South Pacific has been revised and the new data show an asymmetric trend over the Pacific-Antarctic Ridge. Values are anomalously high south of the spreading ridge and in the Ross Sea area, where the topography seems to be affected by persistent mantle processes. In contrast, the basement topography offshore Marie Byrd Land cannot be attributed to dynamic topography, but rather to crustal thickening due to intraplate volcanism. Present-day dynamic topography models disagree with the presented revised basement topography of the South Pacific, rendering paleotopographic reconstructions with such a limited dataset still fairly uncertain.

  4. Pc3-4 ULF waves observed by the SuperDARN TIGER radar

    NASA Astrophysics Data System (ADS)

    Ponomarenko, P. V.; Menk, F. W. F. W.; Waters, C. L.; Sciffer, M. D.

    2005-06-01

    Despite extensive research, the mechanisms for propagation of Pc3-4 energy from the generation region at the bow shock to the high-latitude ionosphere remain unresolved. We used high temporal (6-12s) and spatial (45km) resolution data from the SuperDARN TIGER radar (Tasmania) to examine Pc3-4 wave signatures at the F-region heights. We focus on a case study on 28 September 2000, when large-amplitude band-limited Pc3-4 oscillations were observed across 10-20 range gates in beam #4 (which points towards the CGM pole) for about four hours preceding MLT noon. These waves were detected in sea-scatter echoes reflected from the ionospheric footprint of the plasmatrough. Nearby ground magnetometer data from Macquarie Island showed very similar variations in both the north-south and east-west components. The radar data revealed the occasional presence of quasi-FLR (field-line resonance) spatial structures with frequencies much higher than those of the local fundamental FLR modes. Detailed spectral analysis of the ionospheric and ground data shows that these structures most probably correspond to a 3rd-harmonic, poloidal-mode FLR. Such observations suggest that compressional Pc3-4 waves produced in the upstream solar wind travel earthward from the magnetopause in the magnetic equatorial plane depositing energy into the Alfvenic modes, as either forced or 3rd-harmonic FLR that reach ionospheric heights along magnetic field lines.

  5. The model of lithospheric thickness beneath China from gravity data

    NASA Astrophysics Data System (ADS)

    Zhang, H.; Ravat, D.

    2015-12-01

    We compare estimates of lithospheric thickness from several studies in China and examine whether the available gravity field anomalies can constrain these estimates. Ma (1987) suggested based on integrated geophysics that the lithospheric thickness varies from ~130 km in Qinling Dabie orogenic belt to ~60 km in Beijing, and ~50 km in Bohai bay. Lebedev and Nolet (2003) determined the lithospheric thickness in Bohai bay to be ~140 km from S wave tomography. Sodoudi et al.'s (2006) estimate of the lithospheric thickness is 72 km in Qinling Dabie orogenic belt and ~60 km in north China block. Since physical character differences exist between lithosphere and asthenosphere, it is possible to determine the thickness of lithospheric though gravity data. In this study, we use the crustal thickness obtained from teleseismic receiver functions (Li et al., 2014) to model the Moho gravity field variation and then remove this variation from the observed gravity field. Based on the residual field, the lithospheric thickness is obtained by the Parker inversion. Results show that the lithospheric thickness beneath China varies from ~80 km in the north of XinJiang to ~140 km in Tibet, and it changes to ~100 km in Eastern China. The residual field used for inversion is smooth which results in a smooth lithosphere-asthenosphere boundary (LAB). The LAB is generally in agreement with the previous seismic inversion result along profiles in eastern China (e.g. Li et al., 2011) and suggests that our method could be used to estimate the regional lithospheric variation in other areas in China, and somewhere else.

  6. Microbial metabolism of the pyridine ring. The metabolism of pyridine-3,4-diol (3,4-dihydroxypyridine) by Agrobacterium sp

    PubMed Central

    Watson, G. Keith; Houghton, Charles; Cain, Ronald B.

    1974-01-01

    1. Pyridine-3,4-diol (3,4-dihydroxypyridine, 3-hydroxypyrid-4-one), an intermediate in 4-hydroxypyridine metabolism by an Agrobacterium sp (N.C.I.B. 10413), was converted by extracts into 1mol of pyruvate, 2mol of formate and 1mol of NH3 at pH7.0. 2. Formate, but not the alternative likely product formamide, was further oxidized fivefold faster by 4-hydroxypyridine-grown washed cells than by similar organisms grown on succinate. 3. The oxidation of pyridine-3,4-diol by crude extracts at pH8.5 required 1mol of O2/mol of substrate, produced 1mol of acid and led to the formation of formate and a new compound with an extinction maximum of 285nm (Compound I). This step was believed to be mediated by a new labile dioxygenase (t½=4h at pH7.0, 4°C) cleaving the pyridine ring between C-2 and C-3. 4. Many of the properties of this pyridine-3,4-diol dioxygenase paralleled those of the extradiol (`meta') oxygenases of aromatic-ring cleavage. The extreme lability of the enzyme has so far precluded extensive purification. 5. Compound I showed changes in the u.v.-absorption spectrum with pH but after acidification it was converted into a new product, 3-formylpyruvate, with an extinction maximum now at 279nm. 6. Both Compound I and 3-formylpyruvate were metabolized by extracts but at very different rates. The slower rate of metabolism of Compound I was nevertheless consistent with that of pyridine-3,4-diol metabolism. 7. On acidification Compound I released about 0.65mol of NH3 and has been identified as 3-formiminopyruvate. 8. 3-Formylpyruvate was hydrolysed to formate and pyruvate (Km 2μm) by an acylpyruvate hydrolase active against several other dioxo homologues. The activity of this enzyme was much lower in extracts of succinate-grown cells. PMID:4375963

  7. Global modeling with GEOS-5 from 50-km to 1-km with a single unified GCM

    NASA Astrophysics Data System (ADS)

    Putman, William; Suarez, Max; Molod, Andrea; Barahona, Donifan

    2015-04-01

    The Goddard Earth Observing System model (GEOS-5) of the Global Modeling and Assimilation Office (GMAO) at NASA Goddard Space Flight Center is uniquely designed to adapt to increasing resolution. This supports application of GEOS-5 for decadal scale climate simulation and reanalysis with a horizontal resolution of 50-kilometers (km), high-resolution numerical weather prediction at 25- to 14-km, and global mesoscale modeling at resolutions of 7- to 1.5-km. Resolution-aware parameterizations and dynamics support this diverse portfolio of applications within a single unified GEOS-5 GCM code-base. We will discuss the adaptation of physics parameterizations with increasing resolution. This includes the role of deep convective parameterization, the move to an improved two-moment microphysics scheme, the need for shallow convective parameterization, and the role of non-hydrostatic dynamics and implicit/explicit damping. Parameterization and dynamics evaluation are explored not only in global integrations with GEOS-5 but with radiative convective equilibrium tests that permit the rapid exploration of high-resolution simulations in a smaller doubly periodic Cartesian domain. Simulation results will highlight intercomparisons of model biases in cloud forcing and precipitation from the 30-year 50-km MERRA-2 reanalysis, 50- to 25-km free-running AMIP simulations, a 2-year 7-km global mesoscale simulation, and monthly global simulations at 3.5-km. A global 1.5-km simulation with GEOS-5 highlights our pursuit of truly convection permitting global simulations with GEOS-5. The tuning evaluation for this simulation using doubly periodic radiative convective equilibrium experiments will be discussed.

  8. Electrical and Optical Properties of Poly(3,4-dialkylthiophene)

    NASA Astrophysics Data System (ADS)

    Yoshino, Katsumi; Manda, Yasuhisa; Sawada, Keiji; Morita, Shigenori; Takahashi, Hiroyuki; Sugimoto, Ryu-ichi; Onoda, Mitsuyoshi

    1989-04-01

    Poly(3,4-dialkylthiophene) films prepared by both electrochemical and chemical methods utilizing FeCl3 as catalyst exhibit much larger band gap compared with non-substituted and 3-substituted polythiophene films. Poly(3,4-dialkylthiophene)s with long alkyl chains are soluble in several solvent. However, thermochromism has not been found contrary to poly(3-alkylthiophene), which are explained in terms of large torsion angle between neighbouring thiophene rings due to the steric hindrance by bulky alkyl group. Poly(3,4-dimethylthiophene) with large band gap also demonstrates drastic spectral, electron spin resonance (ESR) and conductivity changes upon doping due to an insulator-metal transition.

  9. Conductimetric immunosensor based on poly(3,4-ethylenedioxythiophene).

    PubMed

    Kanungo, Mandakini; Srivastava, Divesh N; Kumar, Anil; Contractor, A Q

    2002-04-01

    A conductimetric reagentless immunosensor using the biospecific binding pair of goat antirabbit IgG and rabbit IgG has been designed and fabricated using poly (3,4-ethylenedioxythiophene) as the immobilization matrix-cumtransducer. PMID:12119672

  10. Kv3.4 channel function and dysfunction in nociceptors

    PubMed Central

    Ritter, David M; Zemel, Benjamin M; Lepore, Angelo C; Covarrubias, Manuel

    2015-01-01

    Recently, we reported the isolation of the Kv3.4 current in dorsal root ganglion (DRG) neurons and described dysregulation of this current in a spinal cord injury (SCI) model of chronic pain. These studies strongly suggest that rat Kv3.4 channels are major regulators of excitability in DRG neurons from pups and adult females, where they help determine action potential (AP) repolarization and spiking properties. Here, we characterized the Kv3.4 current in rat DRG neurons from adult males and show that it transfers 40–70% of the total repolarizing charge during the AP across all ages and sexes. Following SCI, we also found remodeling of the repolarizing currents during the AP. In the light of these studies, homomeric Kv3.4 channels expressed in DRG nociceptors are emerging novel targets that may help develop new approaches to treat neuropathic pain. PMID:26039360

  11. 34. DETAILS OF CAISSON FOR PIERS 2, 3, 4 AND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    34. DETAILS OF CAISSON FOR PIERS 2, 3, 4 AND 5 TO BE BUILT ON SOIL OVERBURDEN - East Bloomsburg Bridge, Spanning Susquehanna River at Pennsylvania Route 487 (Legislative Route 283), Bloomsburg, Columbia County, PA

  12. VIEW OF APALACHICOLA RIVER BRIDGE SPANS 2, 3, 4, AND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    VIEW OF APALACHICOLA RIVER BRIDGE SPANS 2, 3, 4, AND 5, EAST SIDE, FROM NORTH SHORE OF RIVER (CALHOUN COUNTY SIDE), FACING SOUTH - Apalachicola River Bridge, State Route 20 spanning the Apalachicola River, Blountstown, Calhoun County, FL

  13. VIEW OF APALACHICOLA RIVER BRIDGE SPANS 1, 2, 3, 4, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    VIEW OF APALACHICOLA RIVER BRIDGE SPANS 1, 2, 3, 4, AND 5, EAST SIDE, FROM SOUTH SHORE OF RIVER (LIBERTY COUNTY SIDE), FACING WEST - Apalachicola River Bridge, State Route 20 spanning the Apalachicola River, Blountstown, Calhoun County, FL

  14. VIEW OF APALACHICOLA RIVER BRIDGE SPANS 3, 4, AND 5, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    VIEW OF APALACHICOLA RIVER BRIDGE SPANS 3, 4, AND 5, WEST SIDE, FROM NORTH SHORE OF RIVER (CALHOUN COUNTY SIDE), FACING SOUTHEAST - Apalachicola River Bridge, State Route 20 spanning the Apalachicola River, Blountstown, Calhoun County, FL

  15. ANCHOR SETTING PLAN FOR PIERS 1, 2, 3, 4, 5 ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    ANCHOR SETTING PLAN FOR PIERS 1, 2, 3, 4, 5 AND 6, APALACHICOLA RIVER BRIDGE, SHEET 5505 TO 8-M1 - Apalachicola River Bridge, State Route 20 spanning the Apalachicola River, Blountstown, Calhoun County, FL

  16. Predicting km-scale shear zone formation

    NASA Astrophysics Data System (ADS)

    Gerbi, Christopher; Culshaw, Nicholas; Shulman, Deborah; Foley, Maura; Marsh, Jeffrey

    2015-04-01

    Because km-scale shear zones play a first-order role in lithospheric kinematics, accurate conceptual and numerical models of orogenic development require predicting when and where they form. Although a strain-based algorithm in the upper crust for weakening due to faulting appears to succeed (e.g., Koons et al., 2010, doi:10.1029/2009TC002463), a comparable general rule for the viscous crust remains unestablished. Here we consider two aspects of the geological argument for a similar algorithm in the viscous regime, namely (1) whether predicting km-scale shear zone development based on a single parameter (such as strain or shear heating) is reasonable; and (2) whether lithologic variability inherent in most orogenic systems precludes a simple predictive rule. A review of tectonically significant shear zones worldwide and more detailed investigations in the Central Gneiss belt of the Ontario segment of the Grenville Province reveals that most km-scale shear zones occur at lithological boundaries and involve mass transfer, but have fairly little else in common. As examples, the relatively flat-lying Twelve Mile Bay shear zone in the western Central Gneiss belt bounds the Parry Sound domain and is likely the product of both localized anatexis and later retrograde hydration with attendant metamorphism. Moderately dipping shear zones in granitoids of the Grenville Front Tectonic Zone apparently resulted from cooperation among several complementary microstructural processes, such as grain size reduction, enhanced diffusion, and a small degree of metamorphic reaction. Localization into shear zones requires the operation of some spatially restricted processes such as stress concentration, metamorphism/fluid access, textural evolution, and thermal perturbation. All of these could be due in part to strain, but not necessarily linearly related to strain. Stress concentrations, such as those that form at rheological boundaries, may be sufficient to nucleate high strain

  17. Ubiquitous Low-Velocity Layer Atop the 410-km Discontinuity in the Northern Rocky Mountains

    NASA Astrophysics Data System (ADS)

    Jasbinsek, J. J.; Dueker, K. G.

    2006-12-01

    Receiver functions (RF) from three 30-station IRIS-PASSCAL small aperture arrays (2-15 km station spacing) operated for ten months each in the northern Rocky Mountains show a ubiquitous negative polarity P to S arrival (NPA) just preceding the 410-km discontinuity arrival. Data from the arrays was divided into NW, SE and SW backazimuths and stacked to form nine quadrant stacks (QS). Remarkably, the NPA is apparent in 8 of the 9 QS, with 7 of the 8 displaying a similar dipole shape (paired negative and positive swings). Each QS contains clear P to S arrivals from the 410- and 660-km discontinuities and display the correct moveout. To model the NPA, a "double gradient slab" model consisting of five parameters is used: top gradient thickness and shear wave velocity drop; a constant velocity layer; bottom gradient thickness and shear wave velocity increase. Model misfit is assessed via a grid search over the model space using a reflectivity code to calculate synthetic seismograms. Assessment of model likelihood is done by calculating 1- and 2-D marginal probability density functions (PDF). Model parameters for each QS are well resolved and uncorrelated, with the exception of the anti-correlation of the top and bottom gradients. To define an average model, the probability distributions of each QS for each parameter are multiplied to form summary 1-D marginal PDF from which 90% probability bounds are calculated. These probability bounds are: the top gradient is < 8 km with a velocity decrement of 0.3-0.5 km/s; the constant velocity layer thickness is < 5 km; and, the bottom gradient is 29-37 km with a velocity increase of 0.4-0.6 km/s. The effective width of the low velocity layer atop the 410 (herein called the 410-LVL) is characterized as the layer thickness plus half the two gradient widths. Thus, the 410-LVL is found to have a mean thickness of 26 km and a mean shear wave velocity decrement of 8.3%. These results contrast with 410-LVL widths of 25-90 km and shear

  18. Variations in effective elastic thickness of the North American lithosphere

    NASA Technical Reports Server (NTRS)

    Bechtel, Timothy D.; Forsyth, Donald W.; Sharpton, Virgil L.; Grieve, Richard A. F.

    1990-01-01

    A technique for estimating flexural rigidity that is not limited to sedimentary basins is used here to map variations in the effective elastic thickness of the North American lithosphere. The effective elastic thickness ranges from a minimum of about 4 km in the Basin and Range Province to more than 100 km in the Precambrian core of the continent. This finding supports the idea that flexural rigidity has increased with time since the last thermal event.

  19. 45 Km Horizontal Path Optical Link Experiment

    NASA Technical Reports Server (NTRS)

    Biswas, A.; Ceniceros, J.; Novak, M.; Jeganathan, M.; Portillo, A.; Erickson, D.; Depew, J.; Sanii, B.; Lesh, J. R.

    2000-01-01

    Mountain-top to mountain-top optical link experiments have been initiated at JPL, in order to perform a systems level evaluation of optical communications. Progress made so far is reported. ne NASA, JPL developed optical communications demonstrator (OCD) is used to transmit a laser signal from Strawberry Peak (SP), located in the San Bernadino mountains of California. This laser beam is received by a 0.6 m aperture telescope at JPL's Table Mountain Facility (TMF), located in Wrightwood, California. The optical link is bi-directional with the TMF telescope transmitting a continuous 4-wave (cw) 780 run beacon and the OCD sending back a 840 nm, 100 - 500 Mbps pseudo noise (PN) modulated, laser beam. The optical link path is at an average altitude of 2 km above sea level, covers a range of 46.8 km and provides an atmospheric channel equivalent to approx. 4 air masses. Average received power measured at either end fall well within the uncertainties predicted by link analysis. The reduction in normalized intensity variance (sigma(sup 2, sub I)) for the 4-beam beacon, compared to each individual beam, at SP, was from approx. 0.68 to 0.22. With some allowance for intra-beam mis-alignment, this is consistent with incoherent averaging. The sigma(sup2, sub I) measured at TMF approx. 0.43 +/- 0.22 exceeded the expected aperture averaged value of less than 0.1, probably because of beam wander. The focused spot sizes of approx. 162 +/- 6 microns at the TMF Coude and approx. 64 +/- 3 microns on the OCD compare to the predicted size range of 52 - 172 microns and 57 - 93 microns, respectively. This is consistent with 4 - 5 arcsec of atmospheric "seeing". The preliminary evaluation of OCD's fine tracking indicates that the uncompensated tracking error is approx. 3.3 micro rad compared to approx. 1.7 micro rad observed in the laboratory. Fine tracking performance was intermittent, primarily due to beacon fades on the OCD tracking sensor. The best bit error rates observed while

  20. Method for preparation of 7-hydroxy-1,2,3,4-tetrahydroquinoline from 1,2,3,4-tetrahydroquinoline

    DOEpatents

    Field, George; Hammond, Peter R.

    1994-01-01

    Methods for the efficient preparation of 7-hydroxy-1,2,3,4-tetrahydroquinoline include a first method in which the acylation of m-aminophenol obtains a lactam which is reduced to give the desired quinoline and a second method in which tetrahydroquinoline is nitrated and hydrogenated and then hydrolyzed to obtain the desire quinoline. 7-hydroxy-1,2,3,4-tetrahydroquinoline is used in the efficient synthesis of four lasing dyes of the rhodamine class.

  1. Method for preparation of 7-hydroxy-1,2,3,4-tetrahydroquinoline from 1,2,3,4-tetrahydroquinoline

    DOEpatents

    Field, G.; Hammond, P.R.

    1994-02-01

    Methods for the efficient preparation of 7-hydroxy-1,2,3,4-tetrahydroquinoline include a first method in which the acylation of m-aminophenol obtains a lactam which is reduced to give the desired quinoline and a second method in which tetrahydroquinoline is nitrated and hydrogenated and then hydrolyzed to obtain the desire quinoline. 7-hydroxy-1,2,3,4-tetrahydroquinoline is used in the efficient synthesis of four lasing dyes of the rhodamine class.

  2. Thickness of western mare basalts

    NASA Technical Reports Server (NTRS)

    Dehon, R. A.

    1979-01-01

    An isopach map of the basalt thickness in the western mare basins is constructed from measurements of the exposed external rim height of partially buried craters. The data, although numerically sparse, is sufficiently distributed to yield gross thickness variations. The average basalt thickness in Oceanus Procellarum and adjacent regions is 400 m with local lenses in excess of 1500 m in the circular maria. The total volume of basalt in the western maria is estimated to be in the range of 1.5 x 10 to the 6th power cu km. The chief distinction between the eastern and western maria appears to be one of basalt volumes erupted to the surface. Maximum volumes of basalt are deposited west of the central highlands and flood subjacent terrain to a greater extent than on the east. The surface structures of the western maria reflect the probability of a greater degree of isostatic response to a larger surface loading by the greater accumulation of mare basalt.

  3. Teleportation of entanglement over 143 km.

    PubMed

    Herbst, Thomas; Scheidl, Thomas; Fink, Matthias; Handsteiner, Johannes; Wittmann, Bernhard; Ursin, Rupert; Zeilinger, Anton

    2015-11-17

    As a direct consequence of the no-cloning theorem, the deterministic amplification as in classical communication is impossible for unknown quantum states. This calls for more advanced techniques in a future global quantum network, e.g., for cloud quantum computing. A unique solution is the teleportation of an entangled state, i.e., entanglement swapping, representing the central resource to relay entanglement between distant nodes. Together with entanglement purification and a quantum memory it constitutes a so-called quantum repeater. Since the aforementioned building blocks have been individually demonstrated in laboratory setups only, the applicability of the required technology in real-world scenarios remained to be proven. Here we present a free-space entanglement-swapping experiment between the Canary Islands of La Palma and Tenerife, verifying the presence of quantum entanglement between two previously independent photons separated by 143 km. We obtained an expectation value for the entanglement-witness operator, more than 6 SDs beyond the classical limit. By consecutive generation of the two required photon pairs and space-like separation of the relevant measurement events, we also showed the feasibility of the swapping protocol in a long-distance scenario, where the independence of the nodes is highly demanded. Because our results already allow for efficient implementation of entanglement purification, we anticipate our research to lay the ground for a fully fledged quantum repeater over a realistic high-loss and even turbulent quantum channel. PMID:26578764

  4. Teleportation of entanglement over 143 km

    PubMed Central

    Herbst, Thomas; Scheidl, Thomas; Fink, Matthias; Handsteiner, Johannes; Wittmann, Bernhard; Ursin, Rupert; Zeilinger, Anton

    2015-01-01

    As a direct consequence of the no-cloning theorem, the deterministic amplification as in classical communication is impossible for unknown quantum states. This calls for more advanced techniques in a future global quantum network, e.g., for cloud quantum computing. A unique solution is the teleportation of an entangled state, i.e., entanglement swapping, representing the central resource to relay entanglement between distant nodes. Together with entanglement purification and a quantum memory it constitutes a so-called quantum repeater. Since the aforementioned building blocks have been individually demonstrated in laboratory setups only, the applicability of the required technology in real-world scenarios remained to be proven. Here we present a free-space entanglement-swapping experiment between the Canary Islands of La Palma and Tenerife, verifying the presence of quantum entanglement between two previously independent photons separated by 143 km. We obtained an expectation value for the entanglement-witness operator, more than 6 SDs beyond the classical limit. By consecutive generation of the two required photon pairs and space-like separation of the relevant measurement events, we also showed the feasibility of the swapping protocol in a long-distance scenario, where the independence of the nodes is highly demanded. Because our results already allow for efficient implementation of entanglement purification, we anticipate our research to lay the ground for a fully fledged quantum repeater over a realistic high-loss and even turbulent quantum channel. PMID:26578764

  5. Cloud Thickness from Offbeam Returns - Thor Lidar

    NASA Technical Reports Server (NTRS)

    Cahalan, R.; Kolasinski, J.; McGill, M.; Lau, William K. M. (Technical Monitor)

    2002-01-01

    Physical thickness of a cloud layer, and sometimes multiple cloud layers, can be estimated from the time delay of off-beam returns from a pulsed laser source illuminating one side of the cloud layer. In particular, the time delay of light returning from the outer diffuse halo of light surrounding the beam entry point, relative to the time delay at beam center, determines the cloud physical thickness. The delay combined with the pulse stretch gives the optical thickness. The halo method works best for thick cloud layers, typically optical thickness exceeding 2, and thus compliments conventional lidar which cannot penetrate thick clouds. Cloud layer top and base have been measured independently over the ARM/SGP site using conventional laser ranging (lidar) and the top minus base thickness are compared with a cloud top halo estimate obtained from the NASA/Goddard THOR System (THOR = THickness from Offbeam Returns). THOR flies on the NASA P3, and measures the halo timings from several km above cloud top, at the same time providing conventional lidar cloud top height. The ARM/SGP micropulse lidar provides cloud base height for validation.

  6. Thickness of the magnetic crust of Mars

    NASA Astrophysics Data System (ADS)

    Voorhies, Coerte V.

    2008-04-01

    To estimate the thickness of the magnetic crust of Mars, six observational magnetic spectra are fitted with the theoretical spectrum expected from a novel, bimodal distribution of magnetic sources. Observational spectra differ, for each comes from a different map or model of variously selected and analyzed Mars Global Surveyor Magnetometer/Electron Reflectometer measurements of the vector magnetic field around Mars. The new theoretical spectrum represents fields from both compact sources and extended, laterally correlated sources on a spherical shell, so the estimated shell depth can now be doubled to obtain layer thickness. This typical magnetic crustal thickness is put at 47.8 +/- 8.4 km. The extensive sources are enormous, typically 650 km across, and account for over half the magnetic energy at low degrees. There is some indication that these sources are relatively shallow, but the typical area remains about 330,000 km2. Granted such extended sources represent magnetization of Mars' ancient crust in a core source field dominated by a reversing, areocentric paleodipole, each one arguably formed during a single polarity chron. How did such vast regions of magnetic crust form? A survey of many eligible mechanisms suggests magnetization of cooling igneous rock at minimal rates of about 1 to 0.1 km3/a during superchrons of order 15 to 150 Ma long.

  7. Polyimides containing the cyclobutene-3,4-dione moiety

    NASA Technical Reports Server (NTRS)

    St.clair, Terry L. (Inventor)

    1993-01-01

    In the present invention, linear aromatic polyimides containing the cyclobutene-3,4-dione moiety were produced from the reaction of a substituted or unsubstituted 1,2-bis(4-aminoanilino) cyclobutene-3,4-dione (SQDA) with various aromatic dianhydrides. These polymers had high molecular weights and their glass transition temperatures (Tgs) were greater than 500 C. Despite the very high Tg, these polymers exhibited excellent adhesion to glass. In addition, the films of these polyimides increased in flexibility with increasing cure temperatures. The novelty of this invention lies in the linear aromatic polyimide containing the cyclobutene-3,4-dione moiety. The presence of this moiety causes such changes in properties as Tgs greater than 500 C, excellent adhesion to glass, and increased flexibility with increasing cure temperatures.

  8. Copolyimides prepared from ODPA, BTDA and 3,4'-ODA

    NASA Technical Reports Server (NTRS)

    Chang, Alice C. (Inventor); St. Clair, Terry L. (Inventor)

    1996-01-01

    A copolyimide was prepared by reacting 3,4'-oxydianiline (3,4'-ODA) with a dianhydride blend comprising, based on the total amount of the dianhydride blend, about 67 to 80 mole percent of 4,4'-oxydiphthalic anhydride (ODPA) and about 20 to 33 mole percent of 3,3',4,4'-benzophenonetetracarboxylic dianhydride (BTDA). The copolyimide may be endcapped with up to about 10 mole percent of a monofunctional aromatic anhydride and has unbalanced stoichiometry such that a molar deficit in the dianhydride blend is compensated with twice the molar amount of the monofunctional aromatic anhydride. The copolyimide was used to prepare composites, films and adhesives. The film and adhesive properties were significantly better than those of LaRC.TM.-IA.

  9. Taming of 3,4-Di(nitramino)furazan.

    PubMed

    Tang, Yongxing; Zhang, Jiaheng; Mitchell, Lauren A; Parrish, Damon A; Shreeve, Jean'ne M

    2015-12-30

    Highly energetic 3,4-di(nitramino)furazan (1, DNAF) was synthesized and confirmed structurally by using single-crystal X-ray diffraction. Its highly sensitive nature can be attributed to the shortage of hydrogen-bonding interactions and an interactive nitro chain in the crystal structure. In order to stabilize this structure, a series of corresponding nitrogen-rich salts (3-10) has been prepared and fully characterized. Among these energetic materials, dihydrazinium 3,4-dinitraminofurazanate (5) exhibits a very promising detonation performance (νD = 9849 m s(-1); P = 40.9 GPa) and is one of the most powerful explosives to date. To ensure the practical applications of 5, rather than preparing the salts of 1 through acid-base reactions, an alternative route through the nitration of N-ethoxycarbonyl-protected 3,4-diaminofurazan and aqueous alkaline workup was developed. PMID:26669520

  10. 3,4,5-Trinitropyrazole-based energetic salts.

    PubMed

    Zhang, Yanqiang; Guo, Yong; Joo, Young-Hyuk; Parrish, Damon A; Shreeve, Jean'ne M

    2010-09-17

    High-density energetic salts that are comprised of nitrogen-rich cations and the 3,4,5-trinitropyrazolate anion were synthesized in high yield by neutralization or metathesis reactions. The resulting salts were fully characterized by (1)H, (13)C NMR, and IR spectroscopy; differential scanning calorimetry; and elemental analysis. Additionally, the structures of the 3,5-diaminotriazolium and triaminoguanidinium 3,4,5-trinitropyrazolates were confirmed by single-crystal X-ray diffraction. Based on the measured densities and calculated heats of formation, the detonation performances (pressure: 23.74-31.89 GPa; velocity: 7586-8543 ms(-1); Cheetah 5.0) of the 3,4,5-trinitropyrazolate salts are comparable with 1,3,5-triamino-2,4,6-trinitrobenzene (TATB; 31.15 GPa and 8114 ms(-1)). Impact sensitivities were determined to be no less than 35 J by hammer tests, which places these salts in the insensitive class. PMID:20661962

  11. Crustal-thickness variations in the central Andes

    SciTech Connect

    Beck, S.L.; Myers, S.C.; Wallace, T.C.; Zandt, G. |; Silver, P.G.; Drake, L.

    1996-05-01

    We estimated the crustal thickness along an east-west transect across the Andes at lat 20{degree}S and along a north-south transect along the eastern edge of the Altiplano from data recorded on two arrays of portable broadband seismic stations (BANJO and SEDA). We found crustal-thickness variations of nearly 40 km across the Andes. Maximum crustal thicknesses of 70-74 km under the Western Cordillera and the Eastern Cordillera thin to 32-38 km 200 km east of the Andes in the Chaco Plain. The central Altiplano at 20{degree}S has crustal thicknesses of 60 to 65 km. The crust also appears to thicken from north (16{degree}S, 55-60 km) to south (20{degree}S, 70-74 km) along the Eastern Cordillera. The Subandean zone crust has intermediate thicknesses of 43 to 47 km. Crustal-thickness predictions for the Andes based on Airy-type isostatic behavior show remarkable overall correlation with observed crustal thickness in the regions of high elevation. In contrast, at the boundary between the Eastern Cordillera and the Subandean zone and in the Chaco Plain, the crust is thinner than predicted, suggesting that the crust in these regions is supported in part by the flexural rigidity of a strong lithosphere. With additional constraints, we conclude that the observation of Airy-type isostasy is consistent with thickening associated with compressional shortening of a weak lithosphere squeezed between the stronger lithosphere of the subducting Nazca plate and the cratonic lithosphere of the Brazilian craton. 26 refs., 4 figs.

  12. Predicting gravity and sediment thickness in Afghanistan

    NASA Astrophysics Data System (ADS)

    Jung, W.; Brozena, J.; Peters, M.

    2013-02-01

    The US Naval Research Laboratory conducted comprehensive high-altitude (7 km above mean sea level) aero-geophysical surveys over Afghanistan in 2006 (Rampant Lion I). The surveys were done in collaboration with the US Geological Survey and upon the request of Islamic Republic of Afghanistan Ministry of Mines. In this study, we show that a best fitting admittance between topography and airborne gravity in western Afghanistan can be used to predict airborne gravity for the no-data area of eastern Afghanistan where the mountains are too high to conduct airborne surveys, due to the threat of ground fire. The differences between the airborne and the predicted gravity along a tie-track through the no-data area were found to be within ±12 mGal range with rms difference 7.3 mGal, while those between the predicted gravity from a simple Airy model (with compensation depth of 32 km and crustal density of 2.67 g cm-3) and the airborne gravity were within ±22 mGal range with rms difference 10.3 mGal. A combined airborne free-air anomaly has been constructed by merging the predicted gravity with the airborne data. We also demonstrate that sediment thickness can be estimated for basin areas where surface topography and airborne free-air anomaly profiles do not show a correlation presumably because of thick sediments. In order to estimate sediment thickness, we first determine a simple linear relationship from a scatter plot of the airborne gravity points and the interpolated Shuttle Radar Topography Mission (SRTM) topography along the Rampant Lion I tracks, and computed corresponding quasi-topography tracks by multiplying the linear relationship with the airborne free-air anomalies. We then take the differences between the SRTM and quasi-topography as a first-order estimate of sediment thickness. A global gravity model (GOCO02S), upward continued to the same altitude (7 km above mean sea level) as the data collection, was compared with the low-pass filtered (with cutoff

  13. Corneal thickness in glaucoma.

    PubMed

    De Cevallos, E; Dohlman, C H; Reinhart, W J

    1976-02-01

    The central corneal stromal thickness of patients with open angle glaucoma, secondary glaucoma (the majority aphakic), or a history of unilateral acute angle closure glaucoma were measured and compared with the stromal thickness of a group of normal patients. In open angle glaucoma, there was a small but significant increase in the average stromal thickness. This thickness increase was, in all likelihood, due to an abnormal function of the endothelium in this disease since the level of the intraocular pressure did not seem to be a factor. There was no correlation between stromal thickness and duration of the glaucoma or type of anti-glaucomatous medication. Most cases of secondary glaucome, controlled medically or not, had markedly increased corneal thickness, again, most likely, due to endothelial damage rather than to level of intraocular pressure. After an angle closure attack, permanent damage to the cornea was found to be rare. PMID:1247273

  14. 6. GATES 3, 4, AND 5, INTAKE CHANNEL LOOKING EAST; ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    6. GATES 3, 4, AND 5, INTAKE CHANNEL LOOKING EAST; WATER THAT PASSED INTO PIPES ENTERED SETTLING VAULT. - Hondius Water Line, 1.6 miles Northwest of Park headquarters building & 1 mile Northwest of Beaver Meadows entrance station, Estes Park, Larimer County, CO

  15. 9 CFR 3.4 - Outdoor housing facilities.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... Transportation of Dogs and Cats 1 Facilities and Operating Standards § 3.4 Outdoor housing facilities. (a) Restrictions. (1) The following categories of dogs or cats must not be kept in outdoor facilities, unless that practice is specifically approved by the attending veterinarian: (i) Dogs or cats that are not...

  16. 9 CFR 3.4 - Outdoor housing facilities.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... Transportation of Dogs and Cats 1 Facilities and Operating Standards § 3.4 Outdoor housing facilities. (a) Restrictions. (1) The following categories of dogs or cats must not be kept in outdoor facilities, unless that practice is specifically approved by the attending veterinarian: (i) Dogs or cats that are not...

  17. 9 CFR 3.4 - Outdoor housing facilities.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... Transportation of Dogs and Cats 1 Facilities and Operating Standards § 3.4 Outdoor housing facilities. (a) Restrictions. (1) The following categories of dogs or cats must not be kept in outdoor facilities, unless that practice is specifically approved by the attending veterinarian: (i) Dogs or cats that are not...

  18. 9 CFR 3.4 - Outdoor housing facilities.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Transportation of Dogs and Cats 1 Facilities and Operating Standards § 3.4 Outdoor housing facilities. (a) Restrictions. (1) The following categories of dogs or cats must not be kept in outdoor facilities, unless that practice is specifically approved by the attending veterinarian: (i) Dogs or cats that are not...

  19. 9 CFR 3.4 - Outdoor housing facilities.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... Transportation of Dogs and Cats 1 Facilities and Operating Standards § 3.4 Outdoor housing facilities. (a) Restrictions. (1) The following categories of dogs or cats must not be kept in outdoor facilities, unless that practice is specifically approved by the attending veterinarian: (i) Dogs or cats that are not...

  20. 43 CFR 4120.3-4 - Standards, design and stipulations.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 43 Public Lands: Interior 2 2014-10-01 2014-10-01 false Standards, design and stipulations. 4120.3... ALASKA Grazing Management § 4120.3-4 Standards, design and stipulations. Range improvement permits and cooperative range improvement agreements shall specify the standards, design, construction and...

  1. 43 CFR 4120.3-4 - Standards, design and stipulations.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 43 Public Lands: Interior 2 2012-10-01 2012-10-01 false Standards, design and stipulations. 4120.3... ALASKA Grazing Management § 4120.3-4 Standards, design and stipulations. Range improvement permits and cooperative range improvement agreements shall specify the standards, design, construction and...

  2. 43 CFR 5511.3-4 - Removal by agent.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ..., DEPARTMENT OF THE INTERIOR FOREST MANAGEMENT (5000) FREE USE OF TIMBER Free Use Regulations § 5511.3-4 Removal by agent. A free-use permittee may procure the timber by agent. Such agent shall not, however, be paid more than fair compensation for the time, labor and money expended in procuring timber...

  3. 43 CFR 5511.3-4 - Removal by agent.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ..., DEPARTMENT OF THE INTERIOR FOREST MANAGEMENT (5000) FREE USE OF TIMBER Free Use Regulations § 5511.3-4 Removal by agent. A free-use permittee may procure the timber by agent. Such agent shall not, however, be paid more than fair compensation for the time, labor and money expended in procuring timber...

  4. 43 CFR 5511.3-4 - Removal by agent.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ..., DEPARTMENT OF THE INTERIOR FOREST MANAGEMENT (5000) FREE USE OF TIMBER Free Use Regulations § 5511.3-4 Removal by agent. A free-use permittee may procure the timber by agent. Such agent shall not, however, be paid more than fair compensation for the time, labor and money expended in procuring timber...

  5. 43 CFR 5511.3-4 - Removal by agent.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ..., DEPARTMENT OF THE INTERIOR FOREST MANAGEMENT (5000) FREE USE OF TIMBER Free Use Regulations § 5511.3-4 Removal by agent. A free-use permittee may procure the timber by agent. Such agent shall not, however, be paid more than fair compensation for the time, labor and money expended in procuring timber...

  6. Anxiety Self Report (ASR (1,2,3,4,). X

    ERIC Educational Resources Information Center

    Parsons, Jane S.

    The Anxiety Self Report (ASR 1,2,3,4) is provided, followed by information about the report. The ASR is discussed as to its development, description, response bias, scoring procedures, reliability, stability, validity, and correlation between the ASR and the Manifest Anxiety Scale. (For related documents, see TM 002 928, 929.) (DB)

  7. Hepatitis C Virus NS3/4A Protease Inhibitors.

    PubMed

    López-Labrador, Francesc-Xavier

    2008-11-01

    Chronic hepatitis C virus infection is a global problem worldwide due to the lack of an effective therapy (the current standard of care treatment is effective in about 40-50% of the cases), and the difficulties in developing a protective vaccine. Chronic infection progresses to end-stage liver disease and liver failure in a considerable number of infected individuals. Once liver function is compromised, the only reliable therapeutic intervention is liver transplantation. Unfortunately, re-infection of the graft is unavoidable, and a new chronic hepatitis is early established in transplant recipients, that can result in graft loss. Thus, there is an urgent need for new, specifically targeted therapies for the treatment of HCV chronic infection. Among the viral proteins, the NS3/4A protease and the NS5b RNA-dependent RNA-polymerase, essential for the virus life cycle, have concentrated the efforts in the development of new antivirals, and some promising ones have already entered clinical trials. In particular, inhibitors of the HCV NS3/4A protease are the most advanced in clinical development. This review summarizes the available data for the most important HCV NS3/4A protease inhibitors in development, the most recent patents of these type of compounds, the envisioned options for future HCV therapies, and the eventual impact of HCV genetic variability on resistance to new NS3/4A protease inhibitors. PMID:18991798

  8. 13. PRATT STREET BULKHEAD: SECTIONS 2, 3, 4, 5, AND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    13. PRATT STREET BULKHEAD: SECTIONS 2, 3, 4, 5, AND 6, DRAWER 10, PLAN NO. 1, 1 IN. = 15 FT. AND 1/2 IN. = 1 FT., APRIL 25, 1906, DRAWING SHOWS DESIGN FOR PRATT STREET BULKHEAD BETWEEN PIERS - Baltimore Inner Harbor, Pier 5, South of Pratt Street between Market Place & Concord Street, Baltimore, Independent City, MD

  9. Lead Thickness Measurements

    SciTech Connect

    Rucinski, R.; /Fermilab

    1998-02-16

    The preshower lead thickness applied to the outside of D-Zero's superconducting solenoid vacuum shell was measured at the time of application. This engineering documents those thickness measurements. The lead was ordered in sheets 0.09375-inch and 0.0625-inch thick. The tolerance on thickness was specified to be +/- 0.003-inch. The sheets all were within that thickness tolerance. The nomenclature for each sheet was designated 1T, 1B, 2T, 2B where the numeral designates it's location in the wrap and 'T' or 'B' is short for 'top' or 'bottom' half of the solenoid. Micrometer measurements were taken at six locations around the perimeter of each sheet. The width,length, and weight of each piece was then measured. Using an assumed pure lead density of 0.40974 lb/in{sup 3}, an average sheet thickness was calculated and compared to the perimeter thickness measurements. In every case, the calculated average thickness was a few mils thinner than the perimeter measurements. The ratio was constant, 0.98. This discrepancy is likely due to the assumed pure lead density. It is not felt that the perimeter is thicker than the center regions. The data suggests that the physical thickness of the sheets is uniform to +/- 0.0015-inch.

  10. 3,4,6-Trimethyl-1-phenyl-1H-pyrazolo­[3,4-b]pyridine

    PubMed Central

    Hamri, Salha; Hafid, Abderrafia; Zouihri, Hafid; Lazar, Saïd; Khouili, Mostafa

    2010-01-01

    In the title compound, C15H15N3, the 1H-pyrazolo­[3,4-b]pyridine system and the phenyl ring are each individually planar, with r.m.s. deviations of 0.017 (2) and 0.011 (2) Å, respectively; the dihedral angle between the two aromatic systems is 9.33 (10)°. The crystal packing is stabilized by offset π–π stacking between parallel pyrazolo­[3,4-b]pyridine ring systems [face-to-face distance = 3.449 (6) Å]. PMID:21588287

  11. Lithosphere thickness and mantle viscosity inverted from GPS-derived deformation rates in Fennoscandia

    NASA Astrophysics Data System (ADS)

    Zhao, S.; Lambeck, K.; Lidberg, M.

    2012-07-01

    Crustal deformation in Fennoscandia is associated with the glacial isostatic adjustment (GIA) process that is caused by ongoing stress release of the mantle after removal of the Late Pleistocene ice sheet by ˜10 cal ka BP. With an earth model of defined structure and rheology and an ice-sheet model of known melting history, the GIA process can be simulated by geophysical models, and the surface deformation rates can be calculated and used to compare with global positioning system (GPS) observations. Therefore, the crustal deformation rates observed by GPS in Fennoscandia provide constraints on the geophysical models. On the basis of two ice sheet models (ANU-ICE and ICE-5G) reconstructed independently by the Australian National University (ANU) and University of Toronto, we use the GPS-derived deformation rates to invert for lithosphere thickness and mantle viscosity in Fennoscandia. The results show that only a three-layer earth model can be resolved from current GPS data, providing robust estimates of effective lithosphere thickness, upper and lower mantle viscosity. The earth models estimated from inversion of GPS data with two different ice sheet models define a narrow range of parameter space: the lithosphere thickness between 93 and 110 km, upper mantle viscosity between 3.4 and 5.0 × 1020 Pa s, and lower mantle viscosity between 7 × 1021 and 13 × 1021 Pa s. The estimates are consistent with those inverted from relative sea-level indicators.

  12. Thick film hydrogen sensor

    DOEpatents

    Hoffheins, Barbara S.; Lauf, Robert J.

    1995-01-01

    A thick film hydrogen sensor element includes an essentially inert, electrically-insulating substrate having deposited thereon a thick film metallization forming at least two resistors. The metallization is a sintered composition of Pd and a sinterable binder such as glass frit. An essentially inert, electrically insulating, hydrogen impermeable passivation layer covers at least one of the resistors.

  13. Thick film hydrogen sensor

    DOEpatents

    Hoffheins, B.S.; Lauf, R.J.

    1995-09-19

    A thick film hydrogen sensor element includes an essentially inert, electrically-insulating substrate having deposited thereon a thick film metallization forming at least two resistors. The metallization is a sintered composition of Pd and a sinterable binder such as glass frit. An essentially inert, electrically insulating, hydrogen impermeable passivation layer covers at least one of the resistors. 8 figs.

  14. Education and "Thick" Epistemology

    ERIC Educational Resources Information Center

    Kotzee, Ben

    2011-01-01

    In this essay Ben Kotzee addresses the implications of Bernard Williams's distinction between "thick" and "thin" concepts in ethics for epistemology and for education. Kotzee holds that, as in the case of ethics, one may distinguish between "thick" and "thin" concepts of epistemology and, further, that this distinction points to the importance of…

  15. Evaluation of Whipple Bumper shields at 7 and 10 km/s

    NASA Technical Reports Server (NTRS)

    Ang, J. A.; Chhabildas, L. C.; Cour-Palais, B. G.; Christiansen, E. L.; Crews, J. L.

    1992-01-01

    A series of experiments has been performed on the Sandia Hypervelocity Launcher to determine the performance limits of conventional Whipple shields against representative 0.8 g aluminum orbital debris plate-like fragments with velocities of 7 and 10 km/s. Supporting diagnostics include flash X-rays, high speed photography and transient digitizers for timing correlation. Two Whipple shield designs were tested with either a 0.030 cm or a 0.127 cm thick front sheet and a 0.407 cm thick backsheet separated by 30.5 cm. These two designs bracket the ballistic penetration limit curve for protection against these debris simulants for 7 km/s impacts.

  16. Neurotoxicity of Methamphetamine and 3,4-methylenedioxymethamphetamine

    PubMed Central

    Halpin, Laura E.; Collins, Stuart A.; Yamamoto, Bryan K.

    2013-01-01

    Amphetamines are a class of psychostimulant drugs that are widely abused for their stimulant, euphoric, empathogenic and hallucinogenic properties. Many of these effects result from acute increases in dopamine and serotonin neurotransmission. Subsequent to these acute effects, methamphetamine and 3,4 methylenedioxymethamphetamine (MDMA) produce persistent damage to dopamine and serotonin nerve terminals. This review summarizes the numerous interdependent mechanisms including excitotoxicity, mitochondrial damage and oxidative stress that have been demonstrated to contribute to this damage. Emerging non-neuronal mechanisms by which the drugs may contribute to monoaminergic terminal damage, as well as the neuropsychiatric consequences of this terminal damage are also presented. Methamphetamine and 3,4-methylenedioxymethamphetamine (MDMA) have similar chemical structures and pharmacologic properties compared to other abused substances including cathinone (khat), as well as a relatively new class of novel synthetic amphetamines known as ‘bath salts’ that have gained popularity amongst drug abusers. PMID:23892199

  17. Neurotoxicity of methamphetamine and 3,4-methylenedioxymethamphetamine.

    PubMed

    Halpin, Laura E; Collins, Stuart A; Yamamoto, Bryan K

    2014-02-27

    Amphetamines are a class of psychostimulant drugs that are widely abused for their stimulant, euphoric, empathogenic and hallucinogenic properties. Many of these effects result from acute increases in dopamine and serotonin neurotransmission. Subsequent to these acute effects, methamphetamine and 3,4 methylenedioxymethamphetamine (MDMA) produce persistent damage to dopamine and serotonin nerve terminals. This review summarizes the numerous interdependent mechanisms including excitotoxicity, mitochondrial damage and oxidative stress that have been demonstrated to contribute to this damage. Emerging non-neuronal mechanisms by which the drugs may contribute to monoaminergic terminal damage, as well as the neuropsychiatric consequences of this terminal damage are also presented. Methamphetamine and 3,4-methylenedioxymethamphetamine (MDMA) have similar chemical structures and pharmacologic properties compared to other abused substances including cathinone (khat), as well as a relatively new class of novel synthetic amphetamines known as 'bath salts' that have gained popularity among drug abusers. PMID:23892199

  18. Photoinduced 1,2,3,4-tetrahydropyridine ring conversions.

    PubMed

    Turovska, Baiba; Lund, Henning; Lūsis, Viesturs; Lielpētere, Anna; Liepiņš, Edvards; Beljakovs, Sergejs; Goba, Inguna; Stradiņš, Jānis

    2015-01-01

    Stable heterocyclic hydroperoxide can be easily prepared as a product of fast oxidation of a 1,2,3,4-tetrahydropyridine by (3)O2 if the solution is exposed to sunlight. The driving force for the photoinduced electron transfer is calculated from electrochemical and spectroscopic data. The outcome of the reaction depends on the light intensity and the concentration of O2. In the solid state the heterocyclic hydroperoxide is stable; in solution it is involved in further reactions. PMID:26664638

  19. Photoinduced 1,2,3,4-tetrahydropyridine ring conversions

    PubMed Central

    Lund, Henning; Lūsis, Viesturs; Lielpētere, Anna; Liepiņš, Edvards; Beljakovs, Sergejs; Goba, Inguna; Stradiņš, Jānis

    2015-01-01

    Summary Stable heterocyclic hydroperoxide can be easily prepared as a product of fast oxidation of a 1,2,3,4-tetrahydropyridine by 3O2 if the solution is exposed to sunlight. The driving force for the photoinduced electron transfer is calculated from electrochemical and spectroscopic data. The outcome of the reaction depends on the light intensity and the concentration of O2. In the solid state the heterocyclic hydroperoxide is stable; in solution it is involved in further reactions. PMID:26664638

  20. The crustal thickness of West Antarctica

    NASA Astrophysics Data System (ADS)

    Chaput, J.; Aster, R. C.; Huerta, A.; Sun, X.; Lloyd, A.; Wiens, D.; Nyblade, A.; Anandakrishnan, S.; Winberry, J. P.; Wilson, T.

    2014-01-01

    P-to-S receiver functions (PRFs) from the Polar Earth Observing Network (POLENET) GPS and seismic leg of POLENET spanning West Antarctica and the Transantarctic Mountains deployment of seismographic stations provide new estimates of crustal thickness across West Antarctica, including the West Antarctic Rift System (WARS), Marie Byrd Land (MBL) dome, and the Transantarctic Mountains (TAM) margin. We show that complications arising from ice sheet multiples can be effectively managed and further information concerning low-velocity subglacial sediment thickness may be determined, via top-down utilization of synthetic receiver function models. We combine shallow structure constraints with the response of deeper layers using a regularized Markov chain Monte Carlo methodology to constrain bulk crustal properties. Crustal thickness estimates range from 17.0±4 km at Fishtail Point in the western WARS to 45±5 km at Lonewolf Nunataks in the TAM. Symmetric regions of crustal thinning observed in a transect deployment across the West Antarctic Ice Sheet correlate with deep subice basins, consistent with pure shear crustal necking under past localized extension. Subglacial sediment deposit thicknesses generally correlate with trough/dome expectations, with the thickest inferred subice low-velocity sediment estimated as ˜0.4 km within the Bentley Subglacial Trench. Inverted PRFs from this study and other published crustal estimates are combined with ambient noise surface wave constraints to generate a crustal thickness map for West Antarctica south of 75°S. Observations are consistent with isostatic crustal compensation across the central WARS but indicate significant mantle compensation across the TAM, Ellsworth Block, MBL dome, and eastern and western sectors of thinnest WARS crust, consistent with low density and likely dynamic, low-viscosity high-temperature mantle.

  1. Impurities in Illicit Drug Preparations: 3,4-(Methylenedioxy)amphetamine and 3,4-(Methylenedioxy)methylamphetamine.

    PubMed

    Verweij, A M

    1992-12-01

    Attention is given here to the mass spectral data of impurities present in illicit drug preparations of 3,4-(methylenedioxy)amphetamine and 3,4-(methylenedioxy)methylamphetamine. These "designer" drugs, having emphatic properties, were synthesized following well-known procedures such as the reductive amination route, the Leuckart reaction, and the nitropropene and the bromopropane routes. Based on the structure elucidation of impurities - especially those so-called "route specific" ones - present in these illicit drug preparations conclusions can be drawn about the method of preparation of a drug sample. Furthermore, on the basis of this kind of information methods can be developed for the comparison of drug samples, by which questions about the origin of drug samples can be solved (commonly known as the signature method). PMID:26267375

  2. Inactivation of 3-(3,4-dihydroxyphenyl)alanine decarboxylase by 2-(fluoromethyl)-3-(3,4-dihydroxyphenyl)alanine.

    PubMed

    Maycock, A L; Aster, S D; Patchett, A A

    1980-02-19

    2-(Fluoromethyl)-3-(3,4-dihydroxyphenyl)alanine [alpha-FM-Dopa (I)] causes rapid, time-dependent, stereospecific, and irreversible inhibition of hog kidney aromatic amino acid (Dopa) decarboxylase. The inactivation occurs with loss of both the carboxyl carbon and fluoride from I and results in the stoichimetric formation of a covalent enzyme-inhibitor adduct. The data are consistent with I being a suicide inactivator of the enzyme, and a plausible mechanism for the inactivation process is presented. The inactivation is highly efficient in that there is essentially no enzymatic turnover of I to produce the corresponding amine, 1-(fluoromethyl)-2-(3,4-dihydroxyphenyl)ethylamine [alpha-FM-dopamine (II)]. Amine II is also a potent inactivator of the enzyme. In vivo compound I is found to inactivate both brain and peripheral (liver) Dopa decarboxylase activity. The possible significance of these data with respect to the known antihypertensive effect of I is discussed. PMID:7356954

  3. Origami of thick panels

    NASA Astrophysics Data System (ADS)

    Chen, Yan; Peng, Rui; You, Zhong

    2015-07-01

    Origami patterns, including the rigid origami patterns in which flat inflexible sheets are joined by creases, are primarily created for zero-thickness sheets. In order to apply them to fold structures such as roofs, solar panels, and space mirrors, for which thickness cannot be disregarded, various methods have been suggested. However, they generally involve adding materials to or offsetting panels away from the idealized sheet without altering the kinematic model used to simulate folding. We develop a comprehensive kinematic synthesis for rigid origami of thick panels that differs from the existing kinematic model but is capable of reproducing motions identical to that of zero-thickness origami. The approach, proven to be effective for typical origami, can be readily applied to fold real engineering structures.

  4. Measuring coal thickness

    NASA Technical Reports Server (NTRS)

    Barker, C.; Blaine, J.; Geller, G.; Robinson, R.; Summers, D.; Tyler, J.

    1980-01-01

    Laboratory tested concept, for measuring thickness of overhead coal using noncontacting sensor system coupled to controller and high pressure water jet, allows mining machines to remove virtually all coal from mine roofs without danger of cutting into overlying rock.

  5. Importance of Corneal Thickness

    MedlinePlus

    ... News About Us Donate In This Section The Importance of Corneal Thickness email Send this article to ... is important because it can mask an accurate reading of eye pressure, causing doctors to treat you ...

  6. MODIS 3km Aerosol Product: Algorithm and Global Perspective

    NASA Technical Reports Server (NTRS)

    Remer, L. A.; Mattoo, S.; Levy, R. C.; Munchak, L.

    2013-01-01

    After more than a decade of producing a nominal 10 km aerosol product based on the dark target method, the MODIS aerosol team will be releasing a nominal 3 km product as part of their Collection 6 release. The new product differs from the original 10 km product only in the manner in which reflectance pixels are ingested, organized and selected by the aerosol algorithm. Overall, the 3 km product closely mirrors the 10 km product. However, the finer resolution product is able to retrieve over ocean closer to islands and coastlines, and is better able to resolve fine aerosol features such as smoke plumes over both ocean and land. In some situations, it provides retrievals over entire regions that the 10 km product barely samples. In situations traditionally difficult for the dark target algorithm, such as over bright or urban surfaces the 3 km product introduces isolated spikes of artificially high aerosol optical depth (AOD) that the 10 km algorithm avoids. Over land, globally, the 3 km product appears to be 0.01 to 0.02 higher than the 10 km product, while over ocean, the 3 km algorithm is retrieving a proportionally greater number of very low aerosol loading situations. Based on collocations with ground-based observations for only six months, expected errors associated with the 3 km land product are determined to be greater than for the 10 km product: 0.05 0.25 AOD. Over ocean, the suggestion is for expected errors to be the same as the 10 km product: 0.03 0.05 AOD. The advantage of the product is on the local scale, which will require continued evaluation not addressed here. Nevertheless, the new 3 km product is expected to provide important information complementary to existing satellite-derived products and become an important tool for the aerosol community.

  7. United States crustal thickness

    NASA Technical Reports Server (NTRS)

    Allenby, R. J.; Schnetzler, C. C.

    1983-01-01

    The thickness of the crust, the thickness of the basal (intermediate or lower) crustal layer, and the average velocity at the top of the mantle have been mapped using all available deep-penetrating seismic-refraction profiles in the conterminous United States and surrounding border areas. These profiles are indexed to their literature data sources. The more significant long wavelength anomalies on the three maps are briefly discussed and analyzed. An attempt to use Bouguer gravity to validate mantle structure was inconclusive.

  8. WISE 3.4 micron Detection of PTF10acbp

    NASA Astrophysics Data System (ADS)

    Cutri, R. M.; Hoffman, D.; Masci, F.; Conrow, T.; Kasliwal, M. M.; Helou, G.; Ofek, E. O.; Kulkarni, S. R.; Surace, J.

    2011-01-01

    The Wide-field Infrared Survey Explorer (WISE; Wright et al. 2010 AJ 140, 1868) scanned the position of PTF10acbp (ATEL #3094), the luminous red nova in the spiral galaxy UGC 11973, 23 times between 2010 June 17 and June 23, and again 30 times between 2010 December 12 and December 16, just five days after the transient's discovery. The June observations were made during the WISE cryogenic survey yielding images at 3.4, 4.6, 12 and 22 microns.

  9. AGR 3/4 Irradiation Test Final As Run Report

    SciTech Connect

    Collin, Blaise P.

    2015-06-01

    Several fuel and material irradiation experiments have been planned for the Idaho National Laboratory Advanced Reactor Technologies Technology Development Office Advanced Gas Reactor Fuel Development and Qualification Program (referred to as the INL ART TDO/AGR fuel program hereafter), which supports the development and qualification of tristructural-isotropic (TRISO) coated particle fuel for use in HTGRs. The goals of these experiments are to provide irradiation performance data to support fuel process development, qualify fuel for normal operating conditions, support development and validation of fuel performance and fission product transport models and codes, and provide irradiated fuel and materials for post irradiation examination and safety testing (INL 05/2015). AGR-3/4 combined the third and fourth in this series of planned experiments to test TRISO coated low enriched uranium (LEU) oxycarbide fuel. This combined experiment was intended to support the refinement of fission product transport models and to assess the effects of sweep gas impurities on fuel performance and fission product transport by irradiating designed-to-fail fuel particles and by measuring subsequent fission metal transport in fuel-compact matrix material and fuel-element graphite. The AGR 3/4 fuel test was successful in irradiating the fuel compacts to the burnup and fast fluence target ranges, considering the experiment was terminated short of its initial 400 EFPD target (Collin 2015). Out of the 48 AGR-3/4 compacts, 42 achieved the specified burnup of at least 6% fissions per initial heavy-metal atom (FIMA). Three capsules had a maximum fuel compact average burnup < 10% FIMA, one more than originally specified, and the maximum fuel compact average burnup was <19% FIMA for the remaining capsules, as specified. Fast neutron fluence fell in the expected range of 1.0 to 5.5×1025 n/m2 (E >0.18 MeV) for all compacts. In addition, the AGR-3/4 experiment was globally successful in keeping the

  10. 3.4 GHz composite thin film bulk acoustic wave resonator for miniaturized atomic clocks

    SciTech Connect

    Artieda, Alvaro; Muralt, Paul

    2011-06-27

    Triple layer SiO{sub 2}/AlN/SiO{sub 2} composite thin film bulk acoustic wave resonators (TFBARs) were studied for applications in atomic clocks. The TFBAR's were tuned to 3.4 GHz, corresponding to half the hyperfine splitting of the ground state of rubidium {sup 87}Rb atoms. The quality factor (Q) was equal to 2300 and the temperature coefficient of the resonance frequency f{sub r} amounted to 1.5 ppm/K. A figure of merit Qf{sub r} of {approx} 0.8 x 10{sup 13} Hz and a thickness mode coupling factor of 1% were reached. Such figures are ideal for frequency sources in an oscillator circuit that tracks the optical signal in atomic clocks.

  11. Functional end-capped conducting poly (3,4-ethylenedioxythiophene)

    NASA Astrophysics Data System (ADS)

    Sabatini, V.; Farina, H.; Ortenzi, Marco A.

    2016-05-01

    Methacrylate-terminated Poly(3,4-Ethylenedioxythiophene) (PEDOT) polymers with controlled degree of polymerization were successfully prepared by direct oxidative polycondensation between Ethylenedioxythiophene (EDOT) and a cross-linkable methacrylate end-capper monomer, obtained via Friedel Crafts acylation starting from EDOT and Methacryloyl chloride. The new polymer was synthesized in order to overcome the well-known technical problems of PEDOT, i.e. difficult processability and patterning, due to its poor solubility in common organic and inorganic solvents. The chemical structure and the degree of polymerization of the end-capped polymers were determined by 1H NMR spectra. A new synthesis of Methacrylate end-capped PEDOT with controlled degree of polymerization, soluble in common organic and chlorinated solvents and with improved conductivity, 210 S/cm, was performed. This method includes: direct oxidative polycondensation of 3,4-Ethylenedioxythiophene (EDOT) in the presence of a cross-linkable end-capper, i.e. Methacrylate end-capped EDOT prepared via Friedel Crafts acylation with Methacryloyl chloride and oxidant species, i.e. ferric sulfate. Furthermore, the oxidative polycondensation of EDOT monomer and Methacrylate end-capped EDOT in the presence of Sulfonated Polyethersulfone (SPES)- characterized by different degree of Sulfonation (DS)- as dopant agent was performed, leading to functional end-capped conducting PEDOT, easy to process and pattern, with conductivity of 210 S/cm, 50 S/cm higher than the one of commercial PEDOT.

  12. Possible identifications of the 3.4 micrometer feature

    NASA Technical Reports Server (NTRS)

    Danks, Anthony C.; Lambert, D. L.

    1988-01-01

    A feature at 3.4 micrometer was first detected in Comet Halley by the IKS spectrometer on board the Vega 1 probe; and subsequently from the ground. The feature has since been reported in Comet Wilson. The presence of the feature is of considerable interest for a number of reasons. First, it may represent the detection of a new parent molecule, and when combined with data from Giotto and Vega yield new information on cometary chemistry and the early solar system composition. Secondly, it may represent a link to the interstellar medium, the feature corresponds in wavelength and shape with an interstellar feature seen in absorption in a luminous star, towards the Galactic center known as GC-IRS7. The feature in turn is thought to be related with a growing family of unidentified infrared emission features seen in stellar objects, planetary nebulae, reflection nebulae, HII regions and extra galactic sources. These features occur at wavelengths 3.3, 3.4, 3.5, 6.2, 7.7, 8.6, and 11.25 micrometers. Further identification theory is given.

  13. Role of the transition zone and 660 km discontinuity in mantle dynamics

    NASA Astrophysics Data System (ADS)

    Ringwood, A. E.

    1994-10-01

    Recent seismic evidence suggests that subducted slabs experience resistance to further descent when they encounter the 660 km seismic discontinuity. Several possible causes of this resistance are evaluated. It is concluded that the chemical composition of the lower mantle is similar to that of the upper mantle, and that compositional change is therefore unlikely to be the cause of resistance to slab penetration. The proposal that a large increase of viscosity at the 660 km discontinuity impedes descending slabs is also rejected. However, three other factors are identified, each of which is capable of causing substantial resistance to descending slabs: (1) the negative slope of the transformation of silicate spinel to Mg-perovskite+magnesiowuestite; (2) differentiation of oceanic lithosphere into basaltic and depleted peridotitic layers, causing the slab to be buoyant compared with surrounding mantle pyrolite between depths of 660-800 km; (3) the accumulation of former oceanic crust to produce a gravitationally stable layer of garnetite (about 50 km thick) on top of the 660 km discontinuity. The combined effects of these sources of resistance provide a filter for subducted slabs. Those slabs with seismic zones extending below 600 km may possess sufficient negative buoyancy and strength to overcome the barriers and penetrate into the lower mantle. However, the resistance causes strong buckling and plastic thickening of these slabs, which accumulate to form huge blobs or 'megaliths' underneath the 660 km discontinuity. In contrast, slabs with seismic zones extending no deeper than 300 km possess much smaller degrees of negative buoyancy and strength and hence are unable to penetrate the 660 km discontinuity. Slabs of this type are recycled within the transition zone and upper mantle. Mixing and petrological homogenization processes are less efficient in the transition zone than in the upper mantle (above 400 km). The transition zone is composed mainly of ancient slabs

  14. Ground observations of high-latitude Pc3-4 ULF waves

    NASA Astrophysics Data System (ADS)

    Howard, T. A.; Menk, F. W.

    2005-04-01

    A detailed study has been undertaken of Pc3-4 waves recorded on the ground with the IMAGE magnetometer array (56° < Λ < 76°) during January and March 1998. We focus only on daytime events exhibiting high coherence (>0.6) across the entire station array. Most of these had well-defined wave packet appearance in time series records and a clear peak in power spectra. Their occurrence and frequency suggest the waves are generated by the upstream ion-cyclotron resonance mechanism, with no evidence of generation by the Kelvin-Helmholtz instability. For each event the amplitude, phase, coherence, ellipticity, azimuth angle, and degree of polarization across the ground array were examined. The coherence length, azimuthal wave number, and hence the apparent wave propagation velocity were thus determined, with emphasis on the precision and significance of these measurements. It was found that these daytime Pc3-4 pulsations usually have maximum amplitude near the magnetopause projection, meridional coherence lengths of order 1.5-2.0 × 103 km, and low azimuthal wave numbers during morning hours, averaging around -4.0 (indicating westward propagation). Over 80% of events propagated poleward and westward, with average equivalent ground velocity of 41 km/s N43°W for the H component. About 24-30% of the events are higher harmonics of field line resonances. There is no evidence that the remaining events arise from cavity modes or localized modulated electron precipitation. The observations instead suggest a mechanism involving mode coupling and field-guided propagation. In this model, fast mode waves in the Pc3-4 range entering near the subsolar point propagate earthward and due to the inhomogeneity of the magnetosphere couple to the field-guided Alfvén mode. At certain latitudes, standing oscillations are established at harmonics of the local resonant frequency, while at other latitudes traveling waves convey energy to low altitudes. The expected L dependence of wave power

  15. Conceptual design of a high-Q, 3.4-GHz thin film quartz resonator.

    PubMed

    Patel, Mihir S; Yong, Yook-Kong

    2009-05-01

    Theoretical analyses and designs of high-Q, quartz thin film resonators are presented. The resonators operate at an ultra-high frequency of 3.4 GHz for application to high-frequency timing devices such as cesium chip-scale atomic clocks. The frequency spectra for the 3.4-GHz thin film quartz resonators, which serve as design aids in selecting the resonator dimensions/configurations for simple electrodes, and ring electrode mesa designs are presented here for the first time. The thin film aluminum electrodes are found to play a major role in the resonators because the electrodes are only one third the thickness and mass of the active areas of the plate resonator. Hence, in addition to the material properties of quartz, the elastic, viscoelastic, and thermal properties of the electrodes are included in the models. The frequency-temperature behavior is obtained for the best resonator designs. To improve the frequency-temperature behavior of the resonators, new quartz cuts are proposed to compensate for the thermal stresses caused by the aluminum electrodes and the mounting supports. Frequency response analyses are performed to determine the Q-factor, motional resistance, capacitance ratio, and other figures of merit. The resonators have Q's of about 3800, resistance of about 1300 to 1400 ohms, and capacitance ratios of 1100 to 2800. PMID:19473909

  16. Sediment thickness beneath the Indo-Gangetic Plain and Siwalik Himalaya inferred from receiver function modelling

    NASA Astrophysics Data System (ADS)

    Borah, Kajaljyoti; Kanna, Nagaraju; Rai, S. S.; Prakasam, K. S.

    2015-03-01

    The Indo-Gangetic Plain and the adjoining Siwalik Himalaya are the seismically most vulnerable regions due to high density of human population and presence of thick sediments that amplify the seismic waves due to an earthquake in the region. We investigate the sedimentary structure and crustal thickness of the region through joint inversion of the receiver function time series at 14 broadband seismograph locations and the available Rayleigh velocity data for the region. Results show significant variability of sedimentary layer thicknesses from 1.0 to 2.0 km beneath the Delhi region to 2.0-5.0 km beneath the Indo-Gangetic Plain and the Siwalik Himalaya. As we progress from the Delhi to the Indo-Gangetic Plain, we observe a decrease in the shear velocity in sedimentary layer from ∼2.0 km/s to ∼1.3 km/s while the layer thickness increases progressively from ∼1.0 km in south to 2.0-5.0 km in the north. Average S-velocity in the sedimentary layer beneath the Siwalik Himalaya is ∼2.1 km/s. Crustal thicknesses varies from ∼42 in the Delhi region, ∼48 km in the Indo-Gangetic Plain, ∼50 km in the western part of Siwalik Himalaya to ∼60 km in the Kumaon region of Siwalik Himalaya.

  17. Microphysical Model of the Venus clouds between 40km and 80km

    NASA Astrophysics Data System (ADS)

    McGouldrick, Kevin

    2013-10-01

    I am continuing to adapt the Community Aerosol and Radiation Model for Atmospheres (CARMA) to successfully simulate the multi-layered clouds of Venus. The present version of the one-dimensional model now includes a simple parameterization of the photochemicial production of sulfuric acid around altitudes of 62km, and its thermochemical destruction below cloud base. Photochemical production in the model is limited by the availability of water vapor and insolation. Upper cloud particles are introduced into the model via binary homogeneous nucleation, while the lower and middle cloud particles are created via activation of involatile cloud condensation nuclei. Growth by condensation and coagulation and coalescence are also treated. Mass loadings and particle sizes compare favorably with the in situ observations by the Pioneer Venus Large Probe Particle Size Spectrometer, and mixing ratios of volatiles compare favorably with remotely sensed observations of water vapor and sulfuric acid vapor. This work was supported by the NASA Planetary Atmospheres Program, grant number NNX11AD79G.

  18. Liquid thickness gauge

    NASA Technical Reports Server (NTRS)

    Weinstein, Leonard M. (Inventor)

    1988-01-01

    A method and apparatus are developed to measure the thickness of a liquid on a surface independent of liquid conductivity. Two pairs of round, corrosion resistant wires are mounted in an insulating material such that the cross-sectional area of each wire is flush with and normal to the surface. The resistance between each pair of wires is measured using two ac resistance measuring circuits, in which the ratio of the outputs of the two resistance measuring circuits is indicative of the thickness of the liquid on the surface.

  19. Crustal Thickness of Iran Inferred from Converted Waves

    NASA Astrophysics Data System (ADS)

    Taghizadeh-Farahmand, Fataneh; Afsari, Narges; Sodoudi, Forough

    2015-02-01

    The Iranian plate is part of the Alpine-Himalayan orogenic belt, which has been formed by the continental collision between the Arabian and Eurasian plates. The present-day Iranian plate is characterized by diverse tectonic domains including mountain belts (e.g. Zagros and Alborz, Kopeh-Dagh) and oceanic plate subduction (e.g. Makran). Here we present the lateral variations of the Moho discontinuity beneath Iran using a detailed P receiver function study. Our results allow for more precise estimations of the crustal thickness and enable us to provide a detailed Moho depth map for all of Iran for the first time. We used the teleseismic events recorded from 1995 to 2011 at 77 national permanent stations (24 broadband and 53 short period stations). Our results show significant variations in the crustal thickness, which are related to the different geological features within Iran. In general, the average crustal thickness beneath Iran is about 40-45 km. A relatively thick crust of about 54 ± 2 km due to the shortening is observed beneath the Alborz mountain ranges. The crust beneath the Alborz zone shows a thickness changing from 47 ± 2 to 45 ± 2 km from west to east and reaches a thickness of about 50 ± 2 km beneath the Kopeh-Dagh mountain range. We find the thinnest crust of about 33 ± 2 km beneath the Makran subduction zone in southeast Iran showing a normal continental crust, which has not been influenced by collisional processes. The thickest crust (~66 ± 2 km) is locally observed beneath the Sanandaj-Sirjan Zone, which is considered the suture zone of the collision between the Arabian and Eurasian plates.

  20. Thick Film Interference.

    ERIC Educational Resources Information Center

    Trefil, James

    1983-01-01

    Discusses why interference effects cannot be seen with a thick film, starting with a review of the origin of interference patterns in thin films. Considers properties of materials in films, properties of the light source, and the nature of light. (JN)

  1. Debris cloud characterization at impact velocities of 5 to 11 km/s

    SciTech Connect

    Chhabildas, L.C.; Boslough, M.B.; Reinhart, W.D.; Hall, C.A.

    1993-08-01

    A series of experiments has been performed on the Sandia HyperVelocity Launcher to impact a 1.25-mm thick aluminum bumper by an aluminum flier plate 17-mm diameter by 0.92-mm thick over the velocity range of 5 km/s to 11 km/s. Radiographic techniques were employed to record the debris cloud generated upon impact. The shape of the debris cloud is found to depend on the flier plate tilt. Generally -- the data indicate a central core of higher density surrounded by a diffused layer. These experiments allow measurements of debris cloud expansion velocities as the material undergoes a phase change from solid fragments at impact velocities of 5 km/s to a mixture of liquid and vapor phase at higher impact velocities. The expansion velocity of the debris cloud increases with increasing impact velocity, with the high-density leading edge traveling faster than the impact velocity. There is a difference between the X-ray and photographic measurements of expansion velocities at higher impact velocities. This is believed to be due to the presence of very low-density vapor in the photographic records that are not detecting using X-ray techniques.

  2. Hypervelocity impact tests and simulations of single Whipple bumper shield concepts at 10 km/s

    SciTech Connect

    Chhabildas, L.C.; Hertel, E.S. ); Hill, S.A. )

    1992-01-01

    A series of experiments has been performed to evaluate the effectiveness of a Whipple bumper shield to orbital space debris at impact velocities of [approximately] 10 km/s. Upon impact by a 19 mm (0.87 nun thick, L/D [approximately]0.5) flier plate, the thin aluminum bumper shield disintegrates into a debris cloud. The debris cloud front propagates axially at velocities of [approximately]14 km/s and expands radially at a velocity of [approximately]7 km/s. Subsequent loading by the debris on a 3.2 mm thick aluminum substructure placed 114 mm from the bumper penetrates the substructure completely. However, when the diameter of the flier plate is reduced to 12.7 mm, the substructure, although damaged, is not perforated over the duration of the experiment. Numerical simulations performed using the multi-dimensional hydrodynamics code CTH also predict complete perforation of the substructure by the subsequent debris cloud for the larger flier plate. The numerical simulation for a 12.7 mm flier plate, however, shows a strong dependence on assumed impact geometry, i.e., a spherical projectile impact geometry does not result in perforation of the substructure by the subsequent debris cloud, while the flat plate impact geometry results in perforation.

  3. Hypervelocity impact tests and simulations of single Whipple bumper shield concepts at 10 km/s

    SciTech Connect

    Chhabildas, L.C.; Hertel, E.S.; Hill, S.A.

    1992-12-01

    A series of experiments has been performed to evaluate the effectiveness of a Whipple bumper shield to orbital space debris at impact velocities of {approximately} 10 km/s. Upon impact by a 19 mm (0.87 nun thick, L/D {approximately}0.5) flier plate, the thin aluminum bumper shield disintegrates into a debris cloud. The debris cloud front propagates axially at velocities of {approximately}14 km/s and expands radially at a velocity of {approximately}7 km/s. Subsequent loading by the debris on a 3.2 mm thick aluminum substructure placed 114 mm from the bumper penetrates the substructure completely. However, when the diameter of the flier plate is reduced to 12.7 mm, the substructure, although damaged, is not perforated over the duration of the experiment. Numerical simulations performed using the multi-dimensional hydrodynamics code CTH also predict complete perforation of the substructure by the subsequent debris cloud for the larger flier plate. The numerical simulation for a 12.7 mm flier plate, however, shows a strong dependence on assumed impact geometry, i.e., a spherical projectile impact geometry does not result in perforation of the substructure by the subsequent debris cloud, while the flat plate impact geometry results in perforation.

  4. Whipple bumper shield results and CTH simulations at velocities in excess of 10 km/s

    SciTech Connect

    Chhabildas, L.C.; Hertel, E.S. Jr.; Reinhart, W.D.; Miller, J.M.

    1992-09-01

    A series of experiments has been performed on the Sandia HyperVelocity Launcher (HVL) to evaluate the effectiveness of a Whipple bumper shield to orbital space debris at impact velocities in excess of 10 km/s. Upon impact by a 0.67 g (0.87 mm thick) flier plate, the thin aluminum bumper shield disintegrates into a debris cloud. The debris cloud front propagates axially at velocities of {approximately}14 km/s and expands radially at a velocity of {approximately}7 km/s. Subsequent loading on a 3.2 mm thick aluminum substructure by the debris penetrates the substructure completely. However, when the mass of the flier plate is reduced to 0.33 g, the substructure, although damaged, is not perforated over the duration of the experiment. Numerical simulations performed using the multi-dimensional hydrodynamics code CTH also predict complete penetration of the substructure by the subsequent debris cloud for a 0.87 g flier plate. The numerical simulations for a 0.33 g flier plate show a strong dependence on assumed impact geometry. For the assumption of a spherical projectile impact geometry, perforation of the substructure by the subsequent debris cloud is not predicted by CTH.

  5. Whipple bumper shield results and CTH simulations at velocities in excess of 10 km/s

    SciTech Connect

    Chhabildas, L.C.; Hertel, E.S. Jr.; Reinhart, W.D.; Miller, J.M.

    1992-09-01

    A series of experiments has been performed on the Sandia HyperVelocity Launcher (HVL) to evaluate the effectiveness of a Whipple bumper shield to orbital space debris at impact velocities in excess of 10 km/s. Upon impact by a 0.67 g (0.87 mm thick) flier plate, the thin aluminum bumper shield disintegrates into a debris cloud. The debris cloud front propagates axially at velocities of [approximately]14 km/s and expands radially at a velocity of [approximately]7 km/s. Subsequent loading on a 3.2 mm thick aluminum substructure by the debris penetrates the substructure completely. However, when the mass of the flier plate is reduced to 0.33 g, the substructure, although damaged, is not perforated over the duration of the experiment. Numerical simulations performed using the multi-dimensional hydrodynamics code CTH also predict complete penetration of the substructure by the subsequent debris cloud for a 0.87 g flier plate. The numerical simulations for a 0.33 g flier plate show a strong dependence on assumed impact geometry. For the assumption of a spherical projectile impact geometry, perforation of the substructure by the subsequent debris cloud is not predicted by CTH.

  6. The Century Survey Galactic Halo Project III: A Complete 4300 DEG2 Survey of Blue Horizontal Branch Stars in the Metal-Weak Thick Disk and Inner Halo

    NASA Astrophysics Data System (ADS)

    Brown, Warren R.; Beers, Timothy C.; Wilhelm, Ronald; Allende Prieto, Carlos; Geller, Margaret J.; Kenyon, Scott J.; Kurtz, Michael J.

    2008-02-01

    We present a complete spectroscopic survey of 2414 2MASS-selected blue horizontal branch (BHB) candidates selected over 4300 deg2 of the sky. We identify 655 BHB stars in this non-kinematically selected sample. We calculate the luminosity function of field BHB stars, and find evidence for very few hot BHB stars in the field. The BHB stars located at a distance from the Galactic plane |Z| < 4 kpc trace what is clearly a metal-weak thick disk population, with a mean metallicity of [Fe/H] = -1.7, a rotation velocity gradient of dvrot/d|Z| = -28 ± 3.4 km s-1 in the region |Z| < 6 kpc, and a density scale height of hZ = 1.26 ± 0.1 kpc. The BHB stars located at 5 < |Z| < 9 kpc are a predominantly inner-halo population, with a mean metallicity of [Fe/H] = -2.0 and a mean Galactic rotation of -4 ± 31 km s-1. We infer the density of halo and thick disk BHB stars is 104 ± 37 kpc-3 near the Sun, and the relative normalization of halo to thick-disk BHB stars is 4 ± 1% near the Sun.

  7. The thickness history of the northern sector of the Laurentide Ice Sheet: an assessment of glacial isostatic adjustment models, sea-level measurements, and vertical land motion rates

    NASA Astrophysics Data System (ADS)

    Simon, K. M.; James, T. S.; Henton, J. A.; Dyke, A.

    2014-12-01

    The fit of glacial isostatic adjustment (GIA) model predictions to 24 relative sea-level histories and an additional 18 present-day GPS-measured vertical land motion rates constrains the thickness and volume history of the central and northern Laurentide Ice Sheet. The predictions of the best-fit GIA model indicate respective peak ice thicknesses west and east of Hudson Bay of 3.4-3.6 km and approximately 4 km. These values represent, respectively, a large decrease, and a moderate increase, to the load thickness compared to ICE-5G. This result is generally consistent with other GIA studies focussing on space-geodetic constraints. The large reduction to the ice load west of Hudson Bay also reduces the vertical mantle response along the margins of the load centre, which improves the fit to relative sea-level data from the southern Canadian Arctic Archipelago. The fit of GIA model predictions to relative sea-level data from the Baffin Sector of the Laurentide Ice Sheet indicate peak ice thicknesses there of 1.2-1.3 km, a modest reduction compared to ICE-5G. On Baffin Island, the modelled elastic crustal response of the Earth to present-day ice mass changes is large. Accounting for this effect improves the agreement between GPS measurements of vertical crustal motion and the GIA model predictions. However, work is needed to incorporate more detailed observations and modelling of present-day changes to glaciers and ice caps. Overall, the fit to the data is most strongly improved in the region west of Hudson Bay (the χ2 RSL misfit is reduced by a factor of ~4) although the entire revised reconstruction for the central and northern Laurentide Ice Sheet provides an improved fit to both the regional RSL data (the cumulative χ2 misfit is reduced by a factor of >2) and the GPS data (the RMS misfit is reduced by a factor of 9).

  8. 7 CFR 29.1035 - Mixed color (KM).

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Mixed color (KM). 29.1035 Section 29.1035 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Type 92) § 29.1035 Mixed color (KM). Distinctly different colors of the type mingled together....

  9. 7 CFR 29.1035 - Mixed color (KM).

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 2 2014-01-01 2014-01-01 false Mixed color (KM). 29.1035 Section 29.1035 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Type 92) § 29.1035 Mixed color (KM). Distinctly different colors of the type mingled together....

  10. 7 CFR 29.1035 - Mixed color (KM).

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 2 2011-01-01 2011-01-01 false Mixed color (KM). 29.1035 Section 29.1035 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Type 92) § 29.1035 Mixed color (KM). Distinctly different colors of the type mingled together....

  11. 7 CFR 29.1035 - Mixed color (KM).

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 2 2012-01-01 2012-01-01 false Mixed color (KM). 29.1035 Section 29.1035 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Type 92) § 29.1035 Mixed color (KM). Distinctly different colors of the type mingled together....

  12. 7 CFR 29.1035 - Mixed color (KM).

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 2 2013-01-01 2013-01-01 false Mixed color (KM). 29.1035 Section 29.1035 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Type 92) § 29.1035 Mixed color (KM). Distinctly different colors of the type mingled together....

  13. Exploring KM Features of High-Performance Companies

    NASA Astrophysics Data System (ADS)

    Wu, Wei-Wen

    2007-12-01

    For reacting to an increasingly rival business environment, many companies emphasize the importance of knowledge management (KM). It is a favorable way to explore and learn KM features of high-performance companies. However, finding out the critical KM features of high-performance companies is a qualitative analysis problem. To handle this kind of problem, the rough set approach is suitable because it is based on data-mining techniques to discover knowledge without rigorous statistical assumptions. Thus, this paper explored KM features of high-performance companies by using the rough set approach. The results show that high-performance companies stress the importance on both tacit and explicit knowledge, and consider that incentives and evaluations are the essentials to implementing KM.

  14. Conformational preferences of 3,4-dihydroxyphenylacetic acid (DOPAC)

    NASA Astrophysics Data System (ADS)

    Lopes Jesus, A. J.; Jarmelo, S.; Fausto, R.; Reva, I.

    2015-04-01

    The conformational space of 3,4-dihydroxyphenylacetic acid (DOPAC), an important dopamine metabolite, has been investigated by quantum chemical methods (B3LYP and MP2, with the 6-311++G(d,p) basis set) and matrix-isolation infrared spectroscopy. Detailed analysis of the calculated potential energy surfaces of the molecule led to identification of thirteen unique conformers, all of them showing the acetic acid side chain out of the aromatic ring plane by 60-95°. According to the calculated Gibbs energies, the five lowest energy conformers make up 99.7% of the conformational mixture at 298.15 K, exhibiting individual populations falling between 16% and 24%. The main conformational trends of this molecule were interpreted on the grounds of a thorough analysis of the structural parameters and by the application of the Natural Bond Orbital theory. The role of the intramolecular interactions on the relative stability and structure of the conformers was also investigated. The infrared spectrum of DOPAC was registered after isolation of its monomers in argon and xenon matrices. Only one of DOPAC forms populated in the gas phase could be trapped in both matrix gases. This result is in agreement with the predicted low energy barriers for conformational isomerization and is also supported by annealing experiments. The spectra of matrix-isolated model compounds, phenylacetic acid and catechol, were studied under the same experimental conditions. These data were used as references and assisted in the interpretation of the results obtained for DOPAC.

  15. Developmental effects of 3,4-methylenedioxymethamphetamine: a review.

    PubMed

    Skelton, Matthew R; Williams, Michael T; Vorhees, Charles V

    2008-03-01

    +/-3,4-Methylenedioxymethamphetamine (MDMA) is a chemical derivative of amphetamine that has become a popular drug of abuse and has been shown to deplete serotonin in the brains of users and animals exposed to it. To date, most studies have investigated the effects of MDMA on adult animals. With a majority of users of MDMA being young adults, the chances of the users becoming pregnant and exposing the fetuses to MDMA are also a concern. Evidence to date has shown that developmental exposure to MDMA results in learning and memory impairments in the Morris water maze, a task known to be sensitive to hippocampal disruption, when the animals are tested as adults. Developmental MDMA exposure leads to hypoactivity in the offspring as adults but does not affect outcome on tests of anxiety. MDMA administration decreases pup weight, increases corticosterone and brain-derived neurotrophic factor levels during treatment while decreasing brain levels of serotonin; a decrease that initially dissipates and then reappears in adulthood. Neonatal MDMA exposure increases the sensitivity of the serotonin 1A receptor, a possible mechanism underlying the learning and memory deficits seen. Taken together, the evidence shows that MDMA exposure has adverse effects on the developing brain and behavior. The animal and human data on developmental MDMA exposure are reviewed and their public health implications discussed. PMID:18332674

  16. Harmonic structure of Pc 3--4 pulsations

    SciTech Connect

    Takahashi, K.; McPherron, R.L.

    1982-03-01

    Power spectra of magnetic pulsations observed at synchronous orbit by the ATS 6 satellite often show several spectral peaks simultaneously. Such pulsations, which we call harmonic events because of the nearly constant separation between successive peaks, are continuously observed in the dayside in the Pc 3--4 frequency range (6.6--100 mHz). The harmonic events are seen clearly only in the east-west magnetic field component. The spectral peaks are regularly spaced with a typical minimum separation of 14 mHz in the morining gradually decreasing to 10 mHz in the afternoon. In the dynamic spectra of harmonic events, the fundamental mode is usually absent. In addition, the relative amplitudes of the higher harmonics depend on the magnetic latitude. These observed features can be explained by a standing Alfven wave consisting of many discrete harmonic frequencies. A statistical analysis of power spectra demonstrates that at least 10--30% of Pc 3 pulsations can be classified as harmonic events. Using the harmonic events, we are able to estimate the plasma mass density. For a selected event on August 7, 1975, the plasma mass density at the synchronous orbit is estimated to be 3--8 hydrogen mass/cm/sup 3/.

  17. Deposition of 3,4,4'-trichlorocarbanilide on human skin.

    PubMed

    North-Root, H; Demetrulias, J; Wester, R; Maibach, H; Corbin, N

    1984-08-01

    For rinse-off products such as soaps, quantitating the deposition of ingredients left behind on the skin following rinsing may be important particularly if the ingredient is biologically active, e.g. germicides, perfumes. The residue comprises the major portion of material which is available for percutaneous penetration. A method is described for quantitating the deposition of the soap germicide, 3,4,4'-trichlorocarbanilide (TCC) as the result of direct application of bar soap on human skin. A soap pellet containing 1.5% [14C]TCC was gently rubbed on a small area of the volar forearm for 30 s. 90 s after soap application the site was thoroughly rinsed with water. After rinsing, 1.4% of the applied [14C]TCC, or 0.33 micrograms/cm2, remained on the treated site as determined by cellophane tape stripping followed by scintillation counting. The amount of TCC deposited from a simulated wash with a bar soap onto human skin is compared to the amount deposited onto the skin of other species. PMID:6474513

  18. [Monograph for 3-(4-methylbenzylidene)camphor (4-MBC)--HBM values for the sum of metabolites 3-(4-carboxybenzylidene)camphor (3-4CBC) and 3-(4-carboxybenzylidene)-6-hydroxycamphor (3-4 CBHC) in the urine of adults and children. Statement of the HBM Commission of the German Federal Environment Agency].

    PubMed

    2016-01-01

    The substance 3-(4-methylbenzylidene)camphor (4-MBC, CAS-No. 36861-47-9 as well as 38102-62-4) is used as UV-filter in cosmetics, mainly in sunscreen lotions. National as well as European evaluations are available for the substance, especially from the Scientific Committee on Consumer Products (SCCP). The SCCP did not derive a TDI-value, but used for a MoS assessment a NOAEL of 25 mg/(kg bw · d) based on effects on the thyroid gland of rats in a subchronic study with oral administration. Newer studies, however, indicate lower NOAEL values, leading to tolerable daily intakes of 0,01 mg/kg bw. The HBM Commission established for the metabolite 3-(4-carboxybenzylidene)camphor (3-4CBC) HBM-I values of 0,09 mg/l urine for adults and 0,06 mg/l urine for children. HBM-I values for the metabolite 3-(4-carboxybenzylidene)-6-hydroxycamphor (3-4CBHC) were set at 0,38 mg/l urine for adults and 0,25 mg/l urine for children. The rounded HBM-I value for the sum of metabolites 3-4CBC und 3-4CBHC is accordingly 0,5 mg/l urine for adults and 0,3 mg/l urine for children. PMID:26721474

  19. Marshall Space Flight Center Propulsion Systems Department (PSD) KM Initiative

    NASA Technical Reports Server (NTRS)

    Caraccioli, Paul; Varnadoe, Tom; McCarter, Mike

    2006-01-01

    NASA Marshall Space Flight Center s Propulsion Systems Department (PSD) is four months into a fifteen month Knowledge Management (KM) initiative to support enhanced engineering decision making and analyses, faster resolution of anomalies (near-term) and effective, efficient knowledge infused engineering processes, reduced knowledge attrition, and reduced anomaly occurrences (long-term). The near-term objective of this initiative is developing a KM Pilot project, within the context of a 3-5 year KM strategy, to introduce and evaluate the use of KM within PSD. An internal NASA/MSFC PSD KM team was established early in project formulation to maintain a practitioner, user-centric focus throughout the conceptual development, planning and deployment of KM technologies and capabilities with in the PSD. The PSD internal team is supported by the University of Alabama's Aging Infrastructure Systems Center Of Excellence (AISCE), Intergraph Corporation, and The Knowledge Institute. The principle product of the initial four month effort has been strategic planning of PSD KM implementation by first determining the "as is" state of KM capabilities and developing, planning and documenting the roadmap to achieve the desired "to be" state. Activities undertaken to support the planning phase have included data gathering; cultural surveys, group work-sessions, interviews, documentation review, and independent research. Assessments and analyses have been performed including industry benchmarking, related local and Agency initiatives, specific tools and techniques used and strategies for leveraging existing resources, people and technology to achieve common KM goals. Key findings captured in the PSD KM Strategic Plan include the system vision, purpose, stakeholders, prioritized strategic objectives mapped to the top ten practitioner needs and analysis of current resource usage. Opportunities identified from research, analyses, cultural/KM surveys and practitioner interviews include

  20. The Retrieval of Aerosol Optical Thickness Using the MERIS Instrument

    NASA Astrophysics Data System (ADS)

    Mei, L.; Rozanov, V. V.; Vountas, M.; Burrows, J. P.; Levy, R. C.; Lotz, W.

    2015-12-01

    Retrieval of aerosol properties for satellite instruments without shortwave-IR spectral information, multi-viewing, polarization and/or high-temporal observation ability is a challenging problem for spaceborne aerosol remote sensing. However, space based instruments like the MEdium Resolution Imaging Spectrometer (MERIS) and the successor, Ocean and Land Colour Instrument (OLCI) with high calibration accuracy and high spatial resolution provide unique abilities for obtaining valuable aerosol information for a better understanding of the impact of aerosols on climate, which is still one of the largest uncertainties of global climate change evaluation. In this study, a new Aerosol Optical Thickness (AOT) retrieval algorithm (XBAER: eXtensible Bremen AErosol Retrieval) is presented. XBAER utilizes the global surface spectral library database for the determination of surface properties while the MODIS collection 6 aerosol type treatment is adapted for the aerosol type selection. In order to take the surface Bidirectional Reflectance Distribution Function (BRDF) effect into account for the MERIS reduce resolution (1km) retrieval, a modified Ross-Li mode is used. The AOT is determined in the algorithm using lookup tables including polarization created using Radiative Transfer Model SCIATRAN3.4, by minimizing the difference between atmospheric corrected surface reflectance with given AOT and the surface reflectance calculated from the spectral library. The global comparison with operational MODIS C6 product, Multi-angle Imaging SpectroRadiometer (MISR) product, Advanced Along-Track Scanning Radiometer (AATSR) aerosol product and the validation using AErosol RObotic NETwork (AERONET) show promising results. The current XBAER algorithm is only valid for aerosol remote sensing over land and a similar method will be extended to ocean later.

  1. Thick film ink chemistry

    NASA Astrophysics Data System (ADS)

    Gehman, R. W.

    1982-03-01

    Twenty-six thick film inks from two vendors were proved for hybrid microcircuit production use. A data base of chemical information was established for all the inks to aid in future diagnostic and failure analysis activities. Efforts included both organic chemical analysis of printing vehicles and binders and inorganic chemical analysis of glass frits and electrically active phases. Analytical methods included infrared spectroscopy, mass spectroscopy, gas chromatography, X-ray fluorescence, emission spectroscopy, atomic absorption spectroscopy, and wet chemical techniques.

  2. Time-resolved wave-profile measurements at impact velocities of 10 km/s

    SciTech Connect

    Chhabildas, L.C.; Furnish, M.D.; Reinhart, W.D.

    1998-06-01

    Development of well-controlled hypervelocity launch capabilities is the first step to understand material behavior at extreme pressures and temperatures not available using conventional gun technology. In this paper, techniques used to extend both the launch capabilities of a two-stage light-gas gun to 10 km/s and their use to determine material properties at pressures and temperature states higher than those ever obtained in the laboratory are summarized. Time-resolved interferometric techniques have been used to determine shock loading and release characteristics of materials impacted by titanium and aluminum fliers launched by the only developed three-stage light-gas gun at 10 km/s. In particular, the Sandia three stage light gas gun, also referred to as the hypervelocity launcher, HVL, which is capable of launching 0.5 mm to 1.0 mm thick by 6 mm to 19 mm diameter plates to velocities approaching 16 km/s has been used to obtain the necessary impact velocities. The VISAR, interferometric particle-velocity techniques has been used to determine shock loading and release profiles in aluminum and titanium at impact velocities of 10 km/s.

  3. One-hundred-km-scale basins on Enceladus: Evidence for an active ice shell

    NASA Astrophysics Data System (ADS)

    Schenk, Paul M.; McKinnon, William B.

    2009-08-01

    Stereo-derived topographic mapping of ˜50% of Enceladus reveals at least 6 large-scale, ovoid depressions (basins) 90-175 km across and 800-to-1500 m deep and uncorrelated with geologic boundaries. In contrast, the south polar depression is larger and apparently shallower and correlates with active resurfacing. The shape and scale of the basins is inconsistent with impact, geoid surface deflections, or with dynamically supported topography. Isostatic thinning of Enceladus' ice shell associated with upwellings (and tidally-driven ice melting) can plausibly account for these basins. Thinning implies upwarping of the base of the shell of ˜10-20 km beneath the depressions, depending on total shell thickness; loss of near-surface porosity due to enhanced heat flow may also contribute to basin lows. Alternatively, the basins may overly cold, inactive, and hence denser ice, but thermal isostasy alone requires thermal expansion more consistent with clathrate hydrate than water ice.

  4. The temperature gradient between 100 and 120 km

    NASA Technical Reports Server (NTRS)

    Donahue, T. M.; Carignan, G. R.

    1975-01-01

    Oxygen density profiles inferred from Ogo 6 green nightglow emission vary too sharply between 100 and 120 km to be consistent with temperature gradients in standard model atmospheres, and the eddy diffusion coefficient K determined from these observations reaches its maximum below 115 km. For three atomic oxygen profiles obtained at geographic latitudes of -27.69, +48.89, and +59.10 the temperature profiles required to create a downward flux that varies with altitude as the integrated photolytic production rate above that altitude are calculated, assuming K to be invariant with altitude and latitude. The oxygen distribution can be reconciled with a constant eddy coefficient above 100 km if the temperature gradient reaches a value between 10 and 20 deg K/km for low values of the eddy coefficient (about 500,000 sq cm/sec) or between 30 and 50 deg K/km for a higher eddy coefficient (about 1.6 million sq cm/sec). The maximum gradient for the Jacchia (1971) model is about 10 deg K/km. These temperature profiles predict Ar/N ratios consistent with those measured by sounding rockets. The low K profiles are large enough to remove a large part of the solar energy deposited below 120 km by thermal conduction.

  5. Synthesis and electromagnetic, microwave absorbing properties of core-shell Fe3O4-poly(3, 4-ethylenedioxythiophene) microspheres.

    PubMed

    Zhou, Wencai; Hu, Xiujie; Bai, Xiaoxia; Zhou, Shuyun; Sun, Chenghua; Yan, Jun; Chen, Ping

    2011-10-01

    Highly regulated core-shell Fe(3)O(4)-poly(3, 4-ethylenedioxythiophene) (PEDOT) microspheres were successfully synthesized by a two-step method in the presence of polyvinyl alcohol (PVA) and p-toluenesulfonic acid (p-TSA). And their morphology, microstructure, electromagnetic and microwave absorbing properties were subsequently characterized. By simply adjusting the molar ratio of 3, 4-ethylenedioxythiophene (EDOT) to Fe(3)O(4) (represented by (EDOT)/(Fe(3)O(4))), the thickness of the polymer shell can be tuned from tens to hundreds of nanometers. Moreover, it was found that the composite exhibited excellent microwave absorbing property with a minimum reflection loss (RL) of about -30 dB at 9.5 GHz with a (EDOT)/(Fe(3)O(4)) ratio of 20. PMID:21913665

  6. Antarctic Crustal Thickness from Gravity Inversion

    NASA Astrophysics Data System (ADS)

    Vaughan, A. P.; Kusznir, N. J.; Ferraccioli, F.; Jordan, T. A.

    2013-12-01

    Using gravity anomaly inversion, we have produced the first comprehensive regional maps of crustal thickness and oceanic lithosphere distribution for Antarctica and the Southern Ocean. We determine Moho depth, crustal basement thickness, continental lithosphere thinning (1-1/β) and ocean-continent transition location using a 3D spectral domain gravity inversion method, which incorporates a lithosphere thermal gravity anomaly correction. The continental lithosphere thinning distribution, used to define the initial thermal model temperature perturbation is derived from the gravity inversion and uses no a priori isochron information; as a consequence the gravity inversion method provides a prediction of ocean-continent transition location, which is independent of ocean isochron information. The gravity anomaly contribution from ice thickness is included in the gravity inversion, as is the contribution from sediments which assumes a compaction controlled sediment density increase with depth. Data used in the gravity inversion are elevation and bathymetry, free-air gravity anomaly, the most recent Bedmap2 ice thickness and bedrock topography compilation south of 60 degrees south (Fretwell et al., 2013) and relatively sparse constraints on sediment thickness. Our gravity inversion study predicts thick crust (> 45 km) under interior East Antarctica penetrated by narrow continental rifts that feature relatively thinner crust. The East Antarctic Rift System (EARS) is a major Permian to Cretaceous age rift system that appears to extend from the continental margin at the Lambert Rift to the South Pole region, a distance of 2500 km. This is comparable in scale to the well-studied East African rift system. Intermediate crustal thickness with an inferred linear rift fabric is predicted under Coates Land. An extensive region of either thick oceanic crust or highly thinned continental crust is predicted offshore Oates Land and north Victoria Land, and also off West Antarctica

  7. 3,4-Methylenedioxymethamphetamine facilitates fear extinction learning.

    PubMed

    Young, M B; Andero, R; Ressler, K J; Howell, L L

    2015-01-01

    Acutely administered 3,4-methylenedioxymethamphetamine (MDMA, 'ecstasy') has been proposed to have long-term positive effects on post-traumatic stress disorder (PTSD) symptoms when combined with psychotherapy. No preclinical data support a mechanistic basis for these claims. Given the persistent nature of psychotherapeutic gains facilitated by MDMA, we hypothesized that MDMA improves fear extinction learning, a key process in exposure-based therapies for PTSD. In these experiments, mice were first exposed to cued fear conditioning and treated with drug vehicle or MDMA before extinction training 2 days later. MDMA was administered systemically and also directly targeted to brain structures known to contribute to extinction. In addition to behavioral measures of extinction, changes in mRNA levels of brain-derived neurotrophic factor (Bdnf) and Fos were measured after MDMA treatment and extinction. MDMA (7.8 mg kg(-1)) persistently and robustly enhanced long-term extinction when administered before extinction training. MDMA increased the expression of Fos in the amygdala and medial prefrontal cortex (mPFC), whereas increases in Bdnf expression were observed only in the amygdala after extinction training. Extinction enhancements were recapitulated when MDMA (1 μg) was infused directly into the basolateral complex of the amygdala (BLA), and enhancement was abolished when BDNF signaling was inhibited before extinction. These findings suggest that MDMA enhances fear memory extinction through a BDNF-dependent mechanism, and that MDMA may be a useful adjunct to exposure-based therapies for PTSD and other anxiety disorders characterized by altered fear learning. PMID:26371762

  8. Modulation of 3,4-methylenedioxymethamphetamine effects by endocannabinoid system.

    PubMed

    Valverde, Olga; Rodríguez-Árias, Marta

    2013-01-01

    The amphetamine derivative 3, 4 Methylenedioxymethanphetamine (MDMA) is a powerful central nervous system stimulant that displays numerous pharmacological effects, including neurotoxicity. MDMA, or ecstasy, acts by inducing the release of different neurotransmitters depending on the animal species and, in particular, it produces the release of serotonin and dopamine. MDMA induces rewarding and reinforcing effects in rodents, primates and humans, and is currently consumed as an illicit psychostimulant among young people. One of the most reported side effects is the hyperthermic effect and the neurotoxicity on central serotonergic and dopaminergic neurons, depending on the species of animal. It seems that MDMA may also produce neurotoxic effects in humans. To date, the most consistent findings associated to MDMA consumption in humans relate to cognitive deficits in heavy users. MDMA when consumed as an illicit psychostimulant is commonly co-used with other abusers, being frequently associated with cannabinoids. The interaction between MDMA and cannabis effects is complex. Cannabis derivatives act on endocannabinoid system. Thus, at cellular levels, cannabinoids acting through CB1 cannabinoid receptors display opposite effects to those induced by MDMA, and they have been reported to develop neuroprotective actions, including the blockage of MDMA induced neurotoxicity, in laboratory animals. However, cannabis use is a recognized risk factor in the presentation and development of neuropsychiatric disorders, and also contributes to the development of psychological problems and cognitive failures observed in MDMA users. This paper represents a brief overview of the pharmacological interaction between MDMA and cannabis derivatives acting in the endocannabinoid system. We have evaluated recent findings in the literature of the most representative pharmacological effects displayed by both types of drugs. We analyze both, the synergic and opposite effects produced by these

  9. The KM phase in semi-realistic heterotic orbifold models

    SciTech Connect

    Giedt, Joel

    2000-07-05

    In string-inspired semi-realistic heterotic orbifolds models with an anomalous U(1){sub X},a nonzero Kobayashi-Masakawa (KM) phase is shown to arise generically from the expectation values of complex scalar fields, which appear in nonrenormalizable quark mass couplings. Modular covariant nonrenormalizable superpotential couplings are constructed. A toy Z{sub 3} orbifold model is analyzed in some detail. Modular symmetries and orbifold selection rules are taken into account and do not lead to a cancellation of the KM phase. We also discuss attempts to obtain the KM phase solely from renormalizable interactions.

  10. Accelerating Thick Aluminum Liners Using Pulsed Power

    SciTech Connect

    Kyrala, G.A.; Hammerburg, J.E.; Bowers, D.; Stokes, J.; Morgan, D.V.; Anderson, W.E.; Cochrane, J.C.

    1999-06-28

    The authors have investigated the acceleration of very thick cylindrical aluminum liners using the Pegasus II capacitory bank. These accelerated solid liners will be used to impact other objects at velocities below 1.5 km/sec, allowing one to generate and sustain shocks of a few 100 kilobar for a few microseconds. A cylindrical shell of 1100 series aluminum with an initial inner radius of 23.61 mm, an initial thickness of 3.0 mm, and a height of 20 mm, was accelerated using a current pulse of 7.15 MA peak current and a 7.4 microsecond quarter cycle time. The aluminum shell was imploded within confining copper glide planes with decreasing separation with an inward slope of 8 degrees. At impact with a cylindrical target of diameter 3-cm, the liner was moving at 1.4 km/sec and its thickness increased to 4.5 mm. Radial X-ray radiograms of the liner showed both the liner and the glide plane interface. The curvature of the inner surface of the liner was measured before impact with the 15-mm radius target. The radiograms also showed that the copper glide planes distorted as the liner radius decreased and that some axial stress is induced in the liner. The axial stresses did not affect the inner curvature significantly. Post-shot calculations of the liner behavior indicated that the thickness of the glide plane played a significant role in the distortion of the interface between the liner and the glide plane.

  11. Constraining Enceladus’s ice shell thickness using tidally driven Coulomb failure models of the tiger stripe fractures

    NASA Astrophysics Data System (ADS)

    Olgin, J. G.; Smith-Konter, B. R.; Pappalardo, R. T.

    2009-12-01

    The thickness of Enceladus’s ice shell, and subsequently the depth of its underlying ocean, plays an important role in determining the magnitude and orientation of tidal stresses on the surface of the satellite. The objective of this study is to attempt to constrain Enceladus’s ice shell thickness through assessment of tidally driven Coulomb failure of the tiger stripe fractures, probable sources of tectonic activity that reside along Enceladus’s south polar region. Using the SatStress computational model and assuming a global ocean and uniform ice shell thickness, we compare tidal stresses resulting from a suite of models of variable ice shell thickness (6 km, 24 km, 30 km, 40 km, 50 km, 75 km, and 90 km). Evaluation of the Love numbers for each model (l2, h2 and k2) suggest that ice shell thicknesses greater than a few 10s of km are not capable of generating stress conditions conducive to fault failure on Enceladus. We further investigate the feasibility of tiger stripe failure by applying a Coulomb failure model to the resulting tidal stresses. Based on previous work, we have shown that a 24 km thick ice shell model is capable of generating stress conditions that promote Coulomb failure and strike-slip displacements of ~0.4 m along some portions of the tiger stripe system, assuming a coefficient of friction of 0.2. We compare this reference model to the 6 km, 30 km, 40 km, 50 km, 75 km, and 90 km ice shell models and find that thin to moderate ice shell models do indeed support fault failure, while thick ice shell models do not. Models based on a 6 km ice shell thickness can yield strike-slip displacements on the order of 1 m along all segments of the tiger stripe system. Models based on a 30 km ice shell thickness can also generate strike-slip displacements (~0.1 m), however only on isolated fault segments. Finally, models based on a 40 km ice shell thickness or greater cannot generate stresses capable of Coulomb failure along any of the tiger stripe

  12. New cation-exchange material based on a sulfonated 3,4-ethylenedioxythiophene monomer

    NASA Astrophysics Data System (ADS)

    Stéphan, O.; Schottland, P.; Le Gall, P.-Y.; Chevrot, C.

    1998-06-01

    The electrochemical oxidation, in aqueous medium, of a 3,4-ethylenedioxythiophene monomer functionalized by a sulfonate group exhibiting cation-exchange properties, allows the synthesis of a new type of water-soluble material. In order to synthesize in water, by oxidative electropolymerization, polymer films of controlled thickness containing attached sulfonate groups, we have investigated the polymerization of the functionalized monomer in the presence of the unsubstituted one without supporting electrolyte. Using an equimolar mixture (0.01 mol/l) of both monomers, copolymers exhibiting cation exchange abilities have been synthesized. As an example, th easy incorporation of hexaamine-ruthenium(III) into one of these copolymers is briefly reported. L'oxydation électrochimique en milieu aqueux d'un monomère de type 3,4- éthylènedioxythiophène fonctionnalisé par un groupement sulfonate permet d'envisager la synthèse d'un nouveau type de polymère hydrosoluble. Afin d'obtenir électrochimiquement en milieu aqueux, un film de polymère d'épaisseur contrôlée contenant des groupements sulfonates, nous avons evisagé de polymériser ce monomère en présence de son homologue non substitué. En partant d'un mélange équimolaire (0.01 mol/l) des deux monomères et en l'absence d'électrolyte support, nous avons synthétisé un matériau possédant des propriétés d'échange de cations. A titre d'exemple, nous présentons brièvement l'incorporation d'un complexe hexaaminé du ruthénium(III) dans un de ces copolymères.

  13. 240 kW peak power at 266 nm in nonlinear YAl3(BO3)4 single crystal.

    PubMed

    Ilas, Simon; Loiseau, Pascal; Aka, Gérard; Taira, Takunori

    2014-12-01

    We report the fourth harmonic generation at 266 nm using a type I YAl3(BO3)4 (YAB) single crystal from a Q-switch microchip laser Nd:YAG/Cr⁴⁺:YAG frequency doubled with a LiB3O5 (LBO) crystal. 240 kW peak power at 266 nm corresponding to a mean conversion efficiency of 12.2% from 532 to 266 nm has been obtained with a 2.94 mm thick YAB crystal. The influences of optical homogeneity and absorption on the conversion efficiency are discussed. PMID:25606961

  14. 4-km body(ies?) embedded in Saturn's Huygens Ringlet

    NASA Astrophysics Data System (ADS)

    Spitale, Joseph N.; Hahn, Joseph M.; Tamayo, Daniel

    2016-05-01

    Saturn's 20-km-wide Huygens ringlet, located ~250 km exterior to the B ring, displays unusual kinematics, as evidenced by a time variable width-relation. The cause of this behavior is not clear, but may be related to the presence of large embedded bodies (Spitale and Hahn 2016). The largest such bodies produce half-propeller-shaped disturbances originating at the inner edge of the ringlet, whose radial widths imply a size of ~4 km, based on simple scaling from A-ring propellers. Here, we show that a numerical N-body model of the ringlet with a 4-km body embedded near the inner edge produces features that are consistent with the observed half propellers.

  15. High energy neutrino detection with KM3NeT

    NASA Astrophysics Data System (ADS)

    Migliozzi, Pasquale; KM3NeT Collaboration

    2016-05-01

    The KM3NeT Collaboration has started the construction of a next generation high-energy neutrino telescope in the Mediterranean Sea: the largest and most sensitive neutrino research infrastructure. The full KM3NeT detector will be a several cubic kilometres distributed, networked infrastructure. In Italy, off the coast of Capo Passero, and in France, off the coast of Toulon. Thanks to its location in the Northern hemisphere and to its large instrumented volume, KM3NeT will be the optimal instrument to search for neutrinos from the Southern sky and in particular from the Galactic plane, thus making it complementary to IceCube. In this work the technologically innovative component of the detector, the status of construction and the first results from prototypes of the KM3NeT detector will be described as well as its capability to discover neutrino sources are reported.

  16. Akeno 20 km (2) air shower array (Akeno Branch)

    NASA Technical Reports Server (NTRS)

    Teshima, M.; Ohoka, H.; Matsubara, Y.; Hara, T.; Hatano, Y.; Hayashida, N.; He, C. X.; Honda, M.; Ishikawa, F.; Kamata, K.

    1985-01-01

    As the first stage of the future huge array, the Akeno air shower array was expanded to about 20 sq. km. by adding 19 scintillation detectors of 2.25 sq m area outside the present 1 sq. km. Akeno array with a new data collection system. These detectors are spaced about 1km from each other and connected by two optical fiber cables. This array has been in partial operation from 8th, Sep. 1984 and full operation from 20th, Dec. 1984. 20 sq m muon stations are planned to be set with 2km separation and one of them is now under construction. The origin of the highest energy cosmic rays is studied.

  17. Subtask 3.4 - Fischer - Tropsch Fuels Development

    SciTech Connect

    Strege, Joshua; Snyder, Anthony; Laumb, Jason; Stanislowski, Joshua; Swanson, Michael

    2012-05-01

    Under Subtask 3.4, the Energy & Environmental Research Center (EERC) examined the opportunities and challenges facing FischerTropsch (FT) technology in the United States today. Work was completed in two distinct budget periods (BPs). In BP1, the EERC examined the technical feasibility of using modern warm-gas cleanup techniques for FT synthesis. FT synthesis is typically done using more expensive and complex cold-gas sweetening. Warm-gas cleanup could greatly reduce capital and operating costs, making FT synthesis more attractive for domestic fuel production. Syngas was generated from a variety of coal and biomass types; cleaned of sulfur, moisture, and condensables; and then passed over a pilot-scale FT catalyst bed. Laboratory and modeling work done in support of the pilot-scale effort suggested that the catalyst was performing suboptimally with warm-gas cleanup. Long-term trends showed that the catalyst was also quickly deactivating. In BP3, the EERC compared FT catalyst results using warm-gas cleanup to results using cold-gas sweetening. A gas-sweetening absorption system (GSAS) was designed, modeled, and constructed to sweeten syngas between the gasifier and the pilot-scale FT reactor. Results verified that the catalyst performed much better with gas sweetening than it had with warm-gas cleanup. The catalyst also showed no signs of rapid deactivation when the GSAS was running. Laboratory tests in support of this effort verified that the catalyst had deactivated quickly in BP1 because of exposure to syngas, not because of any design flaw with the pilot-scale FT reactor itself. Based on these results, the EERC concludes that the two biggest issues with using syngas treated with warm-gas cleanup for FT synthesis are high concentrations of CO{sub 2} and volatile organic matter. Other catalysts tested by the EERC may be more tolerant of CO{sub 2}, but volatile matter removal is critical to ensuring long-term FT catalyst operation. This subtask was funded through

  18. How does music aid 5 km of running?

    PubMed

    Bigliassi, Marcelo; León-Domínguez, Umberto; Buzzachera, Cosme F; Barreto-Silva, Vinícius; Altimari, Leandro R

    2015-02-01

    This research investigated the effects of music and its time of application on a 5-km run. Fifteen well-trained male long-distance runners (24.87 ± 2.47 years; 78.87 ± 10.57 kg; 178 ± 07 cm) participated in this study. Five randomized experimental conditions during a 5-km run on an official track were tested (PM: motivational songs, applied before 5 km of running; SM: slow motivational songs, applied during 5 km of running; FM: fast and motivational songs, applied during 5 km of running; CS: calm songs, applied after 5 km of running; CO: control condition). Psychophysiological assessments were performed before (functional near-infrared spectroscopy, heart rate variability [HRV], valence, and arousal), during (performance time, heart rate, and rate of perceived exertion [RPE]), and after (mood, RPE, and HRV) tests. The chosen songs were considered pleasurable and capable of activating. Furthermore, they activated the 3 assessed prefrontal cortex (PFC) areas (medial, right dorsolateral, and left dorsolateral) similarly, generating positive emotional consequences by autonomous system analysis. The first 800 m was accomplished faster for SM and FM compared with other conditions (p ≤ 0.05); moreover, there was a high probability of improving running performance when music was applied (SM: 89%; FM: 85%; PM: 39%). Finally, music was capable of accelerating vagal tonus after 5 km of running with CS (p ≤ 0.05). In conclusion, music was able to activate the PFC area, minimize perceptions, improve performance, and accelerate recovery during 5 km of running. PMID:25029009

  19. Seismology and lateral thickness variations of the lunar crust

    NASA Astrophysics Data System (ADS)

    Chenet, H.; Lognonné, P.; Wieczorek, M.; Mizutani, H.

    The Apollo missions set up a seismic network on the nearside of the Moon (1969-1977), which allowed to address the fundamental questions of lunar science. Recently this dataset was re-investigated in order to shed light on ambiguous results of ancient studies. One of them was the proposed 60 km crustal thickness below the Apollo station 12 and 14 sites. Today, Khan and Mosegaard (2002) and Lognonné et al. (2003), both propose that the crust is much thinner than expected, respectively around 45 and 30 km. On the other hand, lateral relative variations of crustal thickness can be determined by inversion of gravity and topography data, but this process requires the use of a reference thickness brought by seismic determination, in order to build a crustal thickness map. This present work goes further. In this study, we constrain for the first time the lateral variations of crustal thickness with seismic and topography data only. We use a Markov-Chain Monte-Carlo method to invert for the lateral crustal thickness, determined by the arrival times of impacts at the 4 Apollo stations. Each impact and station site is associated to an independent Moho depth. Thus, we find independent seismological constraints on the Moho depth for 30 different locations on the lunar surface instead of one. We will present here the results of this study via a comparison between this first lunar crustal thickness map we built with seismology, and the map resulting from analysis of the gravity data.

  20. The Crustal Thickness of Mars: Accuracy and Resolution

    NASA Technical Reports Server (NTRS)

    Smith, D. E.; Zuber, M. T.

    2002-01-01

    The accuracy of the most recent crustal thickness models of Mars is investigated along with their resolution. Evidence is presented of noise-like features in the maps and spectra that suggest the basic data only represent features down to resolutions of about 300 to 600 km. Additional information is contained in the original extended abstract.

  1. Status of the KM3NeT project

    NASA Astrophysics Data System (ADS)

    Margiotta, A.

    2014-04-01

    KM3NeT is a deep-sea research infrastructure being constructed in the Mediterranean Sea. It will be installed at three sites: KM3NeT-Fr, offshore Toulon, France, KM3NeT-It, offshore Portopalo di Capo Passero, Sicily (Italy) and KM3NeT-Gr, offshore Pylos, Peloponnese, Greece. It will host the next generation Cherenkov neutrino telescope and nodes for a deep sea multidisciplinary observatory, providing oceanographers, marine biologists, and geophysicists with real time measurements. The neutrino telescope will search for Galactic and extra-Galactic sources of neutrinos, complementing IceCube in its field of view. The detector will have a modular structure and consists of six building blocks, each including about one hundred Detection Units (DUs). Each DU will be equipped with 18 multi-PMT digital optical modules. The first phase of construction has started and shore and deep-sea infrastructures hosting the future KM3NeT detector are being prepared in France near Toulon and in Italy, near Capo Passero in Sicily. The technological solutions for KM3NeT and the expected performance of the detector are presented and discussed.

  2. Anisotropic Molecular Orientation of Poly [4, 4'-oxydiphenylene- 1, 2, 3, 4-cyclobutanetetracarboximide] Films Irradiated by Linearly Polarized UV Light

    NASA Astrophysics Data System (ADS)

    Sakamoto, Kenji; Usami, Kiyoaki; Araya, Takeshi; Ushioda, Sukekatsu

    1999-12-01

    We have investigated the anisotropic molecular orientation of poly [4, 4'-oxydiphenylene-1, 2, 3, 4-cyclobutanetetracarboximide] (CBDA-ODA) films induced by irradiation with linearly polarized ultraviolet light (LPUVL). The molecular orientation was monitored by measuring the polarized infrared (IR) absorption spectra of a 10-nm-thick film. The anisotropy of the molecular orientation exceeded that of a rubbed film with the same film thickness. From the LPUVL exposure dependence of IR absorption we found that preferential cleavage occurs to the cyclobutane ring in the polyimide backbone structure oriented parallel to the polarization direction of LPUVL. Then the orientation of the cleaved polyimide molecule is randomized. We conclude that the large anisotropy of the LPUVL-exposed film is caused by the anisotropic cleavage of the cyclobutane rings and the orientational randomization of the cleaved polyimide molecules.

  3. The vertical structure and thickness of Saturn's rings

    NASA Technical Reports Server (NTRS)

    Cuzzi, J. N.; Burns, J. A.; Durisen, R. H.; Hamill, P. M.

    1979-01-01

    An explanation for the vertical structure and thickness of Saturn's rings compatible with observational data is presented. The model of the rings as being many particles thick is shown to be possible, with random particle motions preventing the complete flattening of the system and a gaussian distribution of particle density with vertical displacement. The model prediction of a maximum ring thickness of tens of meters, however, is in conflict with observations of ring thickness of at least 0.8 km at ring-plane passage. It is shown that perturbations to ring particle orbits caused by the sun and Saturn's large satellites may produce long- and short-period coherent vertical ring displacements and a nonlinear displacement of the ring plane from the equatorial plane with radial distance, leading to an apparent edge-on thickness of a few hundred meters.

  4. Fetal nuchal translucency thickness.

    PubMed

    Witters, I; Fryns, J R

    2007-01-01

    In the early 1990s Nicolaides introduced screening for trisomy 21 by fetal nuchal translucency thickness measurement with ultrasound between 11-13(+6) weeks. Already in 1866 L. Down noted that common features of patients with trisomy 21 are a skin being too large for the body and a flat face with a small nose. While detection rates for trisomy 21, given an invasive testing rate of 5%, were only 30% for screening by maternal age and 65% for screening by maternal serum triple test, the detection rate for screening by nuchal translucency combined with maternal age was 75% and this could be increased to 90% in combination with maternal serum screening (serum B-human chorionic gonadotropin and pregnancy-associated plasma protein-A) at 11-13(+6) weeks. The additional soft markers in the first trimester are the fetal nasal bone, the Doppler velocity waveform in the ductus venosus and tricuspid regurgitation and these markers can be used to further increase the detection rate of trisomy 21. In addition increased nuchal translucency thickness can also identify other chromosomal defects (mainly trisomy 13 and 18 and monosomy X) and major congenital malformations (mainly cardiac defects) and genetic syndromes. PMID:17515296

  5. On the relations between cratonic lithosphere thickness, plate motions, and basal drag

    USGS Publications Warehouse

    Artemieva, I.M.; Mooney, W.D.

    2002-01-01

    An overview of seismic, thermal, and petrological evidence on the structure of Precambrian lithosphere suggests that its local maximum thickness is highly variable (140-350 km), with a bimodal distribution for Archean cratons (200-220 km and 300-350 km). We discuss the origin of such large differences in lithospheric thickness, and propose that the lithospheric base can have large depth variations over short distances. The topography of Bryce Canyon (western USA) is proposed as an inverted analog of the base of the lithosphere. The horizontal and vertical dimensions of Archean cratons are strongly correlated: larger cratons have thicker lithosphere. Analysis of the bimodal distribution of lithospheric thickness in Archean cratons shows that the "critical" surface area for cratons to have thick (>300 km) keels is >6-8 ?? 106 km2 . Extrapolation of the linear trend between Archean lithospheric thickness and cratonic area to zero area yields a thickness of 180 km. This implies that the reworking of Archean crust should be accompanied by thinning and reworking of the entire lithospheric column to a thickness of 180 km in accord with thickness estimates for Proterozoic lithosphere. Likewise, extrapolation of the same trend to the size equal to the total area of all Archean cratons implies that the lithospheric thickness of a hypothesized early Archean supercontinent could have been 350-450 km decreasing to 280-400 km for Gondwanaland. We evaluate the basal drag model as a possible mechanism that may thin the cratonic lithosphere. Inverse correlations are found between lithospheric thickness and (a) fractional subduction length and (b) the effective ridge length. In agreement with theoretical predictions, lithospheric thickness of Archean keels is proportional to the square root of the ratio of the craton length (along the direction of plate motion) to the plate velocity. Large cratons with thick keels and low plate velocities are less eroded by basal drag than small

  6. STP/S3-4 satellite experiment: high latitude large scale density irregularities. Memorandum report

    SciTech Connect

    Rodriguez, P.; Singh, M.; Szuszczewicz, E.P.; Walker, D.N.; Holmes, J.C.

    1981-05-26

    Large scale density irregularities in the nighttime auroral zone F-region are routinely detected by a pair of pulsed plasma probes on the S3-4 satellite. The absolute density variations can be as large as an order of magnitude and in the case of a quiet diffuse aurora, the irregularities appear to be consistent with the sheet-like structures that have been postulated to explain high latitude scintillation enhancements. In a more dynamic situation, which we believe to be a surging aurora, the density variations may be associated with a density gradient and/or current-driven plasma instability. We have made preliminary analyses of the density fluctuations and FFT power spectra for evidence of characteristic scale sizes and power law dependence. Scale sizes from 10 to 300 km are clearly evident in the irregularities; power law fits to the spectra have spectral indices in the range -1.5 to -1.7. For the diffuse aurora our results suggest support for a recent numerical study of the nonlinear evolution of the current convective instability.

  7. Hubble Space Telescope imaging of a radio-quiet galaxy at redshift z = 3.4

    NASA Technical Reports Server (NTRS)

    Giavalisco, Mauro; Macchetto, F. Duccio; Madau, Piero; Sparks, William B.

    1995-01-01

    We have observed with the Wide Field/Planetary Camera (WF/PC) on the Hubble Space Telescope (HST) a radio-quiet Ly alpha-emitting galaxy at redshift z = 3.428 (G2 below). The images probe the rest-frame UV light around 1250 A with an angular resolution of approx. = 0.1 sec, corresponding to 1.4 h(exp -1, sub 50) kpc at redshift z = 3.4 (in this Letter we use q(sub 0) = 0 and H(sub 0) = 50 h(exp -1, sub 50) km/s/Mpc). The light profile of the central approx. 10h(exp -1, sub 50) kpc region is well fitted by an r(exp 1/4) law with r(sub e) approx. = 1.3 h(exp -1, sub 50) kpc, suggesting a dynamically relaxed state. The outer regions are characterized by the presence of substructures, such as an elongated formation and low surface brightness nebulosities. The isophotal analysis shows no evidence of an active galactic nuclei (AGN)-like unresolved source in the center. The structural properties of G2 are consistent with a dynamically hot stellar system observed during an early phase of star formation, very likely the progenitor of an elliptical or the bulge of a spiral galaxy.

  8. New modeling results of the Bunte breccia ejecta morphology and thickness variations outside the Ries impact crater, southern Germany

    NASA Astrophysics Data System (ADS)

    Sturm, S.; Wulf, G.; Jung, D.; Kenkmann, T.

    2012-04-01

    The Ries impact crater with a diameter of ~25 km represents a relatively pristine, complex impact crater in southern Germany that was formed during the Miocene (14.34+-0.08 Ma) [1, 2]. The impact occurred into a two-layered target that consists of ~650 m partly water-saturated and subhorizontally layered sediments (limestones, sandstones, shales) of Triassic to Tertiary ages underlain by crystalline basement rocks (mainly gneisses, granites and amphibolites) [3, 4]. The continuous ejecta blanket of the crater ejected up to a distance of 45 km from the crater center is built up by so called Bunte breccias, a polymict lithic breccia. The ejected breccia material mainly consists of unshocked to weakly shocked sedimentary target clasts in addition to a minority of crystalline basement clasts and reworked surfical sediments (e.g., Upper Freshwater Molasses or Upper Seawater Molasses) [5, 6]. Here we present new results of the morphology of the (i) paleo-relief and (ii) the thickness variations of the continuous ejecta blanket with radial range. For this study we combined digital elevation data and geologic information of the recent geologic map [7] in ArcGIS (ESRI) and RockWorks14 (RockWare) to extract the elevation of the lower contact plane ("paleo-surface") and the contact between the Bunte breccia and the overlain Suevite deposits. In detail, we extracted the mapping information of the autochthonous-allochthonous ("Bunte breccia base") and allochthonous-suevite ("Bunte breccia top") intersections from the geologic map [7], descriptions of nine NASA drilling sites [6], and included up to 40 drillings carried out by the Bavarian Environment Agency to interpolate the morphology and thickness variation of the Bunte breccia ejecta outside the Ries impact crater. Due to the highest data density and the widespread occurrence of Bunte breccia deposits as well as Suevite, the southwestern part of the ejecta blanket was selected for the study and delivered a more or less

  9. Local fluctuations of ozone from 16 km to 45 km deduced from in situ vertical ozone profile

    NASA Technical Reports Server (NTRS)

    Moreau, G.; Robert, C.

    1994-01-01

    A vertical ozone profile obtained by an in situ ozone sonde from 16 km to 45 km, has allowed to observe local ozone concentration variations. These variations can be observed, thanks to a fast measurement system based on a UV absorption KrF excimer laser beam in a multipass cell. Ozone standard deviation versus altitude calculated from the mean is derived. Ozone variations or fluctuations are correlated with the different dynamic zones of the stratosphere.

  10. Similarities and Differences in Pacing Patterns in a 161-km and 101-km Ultra-Distance Road Race.

    PubMed

    Tan, Philip L S; Tan, Frankie H Y; Bosch, Andrew N

    2016-08-01

    Tan, PLS, Tan, FHY, and Bosch, AN. Similarities and differences in pacing patterns in a 161-km and 101-km ultra-distance road race. J Strength Cond Res 30(8): 2145-2155, 2016-The purpose of this study was to establish and compare the pacing patterns of fast and slow finishers in a tropical ultra-marathon. Data were collected from the Craze Ultra-marathon held on the 22nd and 21st of September in 2012 and 2013, respectively. Finishers of the 161-km (N = 47) and 101-km (N = 120) categories of the race were divided into thirds (groups A-C) by merit of finishing time. Altogether, 17 and 11 split times were recorded for the 161-km and 101-km finishers, respectively, and used to calculate the mean running speed for each distance segment. Running speed for the first segment was normalized to 100, with all subsequent splits adjusted accordingly. Running speed during the last 5 km was calculated against the mean race pace to establish the existence of an end spurt. A reverse J-shaped pacing profile was demonstrated in all groups for both distance categories and only 38% of the finishers executed an end spurt. In the 101-km category, in comparison with groups B and C, group A maintained a significantly more even pace (p = 0.013 and 0.001, respectively) and completed the race at a significantly higher percent of initial starting speed (p = 0.001 and 0.001, respectively). Descriptive data also revealed that the top 5 finishers displayed a "herd-behavior" by staying close to the lead runner in the initial portion of the race. These findings demonstrate that to achieve a more even pace, recreational ultra-runners should adopt a patient sustainable starting speed, with less competitive runners setting realistic performance goals whereas competitive runners with a specific time goal to consider running in packs of similar pace. PMID:26808845

  11. The Equivalent Slab Thickness of Mars' Ionosphere

    NASA Astrophysics Data System (ADS)

    Mendillo, M.; Lawler, G.; Narvaez, C.; Kofman, W.; Mouginot, J.; Morgan, D.; Gurnett, D.

    2014-04-01

    The integral with height of an electron density profile, called the ionospheric total electron content (TEC), is dominated by plasma near the height of maximum electron density (Nmax). The ratio τ = TEC/Nmax has a unit of distance, representing the thickness of a slab of plasma of uniform density (Nmax) with the same TEC. At Earth, the parameter τ has been found to vary far less than either Nmax or TEC, and thus models of τ can be used to generate values of TEC or Nmax when only one is observed. For an ionospheric layer dominated by photo-chemical processes, τ has also been related to the scale height of the neutral gas (H = kT/mg) that is ionized by sunlight. The MARSIS radio science package on the Mars Express satellite has produced large independent data sets of TEC and Nmax. We have used them to form slab thickness patterns versus phase of the solar cycle and solar zenith angle. The overall sample average for daytime (SZA < 90o) conditions is < τ >day = 71 ± 21 km, and for SZA between 90o - 100o, < τ >terminator = 55 ± 25 km. We will report on the possible use of τ patterns to infer characteristics of the martian ionosphere and thermosphere.

  12. Degradation of aqueous 3,4-dichloroaniline by a novel dielectric barrier discharge plasma reactor.

    PubMed

    Feng, Jingwei; Liu, Runlong; Chen, Pei; Yuan, Shoujun; Zhao, Dayong; Zhang, Jibiao; Zheng, Zheng

    2015-03-01

    Degradation of aqueous 3,4-dichloroaniline (3,4-DCA) was conducted in a novel dielectric barrier discharge (DBD) plasma reactor. The factors affecting the degradation efficiency of 3,4-DCA and the degradation mechanism of 3,4-DCA were investigated. The experimental results indicated that the degradation efficiency of 3,4-DCA increased with increasing input power intensity, and the degradation of 3,4-DCA by the novel DBD plasma reactor fitted pseudo-first-order kinetics. Higher degradation efficiency of 3,4-DCA was observed in acidic conditions. The degradation efficiency of 3,4-DCA, the removal rate of total organic carbon (TOC), and the detected Cl(-) increased dramatically with adding Fe(2+) or Fe(3+). Degradation of 3,4-DCA could be accelerated or inhibited in the presence of H2O2 depending on the dosage. Several degradation intermediates of 3,4-DCA such as 1,2-dichlorobenzene, 2-chloro-1,4-benzoquinone, 3,4-dichlorophenyl isocyanate, 2-chlorohydroquinone, 3,4-dichloronitrobenzene, and 3,4-dichlorophenol were identified by gas chromatography mass spectrometry (GC-MS) analysis. Based on the identification of aromatic intermediates, acetic acid, formic acid, oxalic acid, and Cl(-) released, a possible mineralization pathway of 3,4-DCA was proposed. PMID:25315933

  13. Ultrasonic Inspection Of Thick Sections

    NASA Technical Reports Server (NTRS)

    Friant, C. L.; Djordjevic, B. B.; O'Keefe, C. V.; Ferrell, W.; Klutz, T.

    1993-01-01

    Ultrasonics used to inspect large, relatively thick vessels for hidden defects. Report based on experiments in through-the-thickness transmission of ultrasonic waves in both steel and filament-wound composite cases of solid-fuel rocket motors.

  14. Gravity Waves Near 300 km Over the Polar Caps

    NASA Technical Reports Server (NTRS)

    Johnson, F. S.; Hanson, W. B.; Hodges, R. R.; Coley, W. R.; Carignan, G. R.; Spencer, N. W.

    1995-01-01

    Distinctive wave forms in the distributions of vertical velocity and temperature of both neutral particles and ions are frequently observed from Dynamics Explorer 2 at altitudes above 250 km over the polar caps. These are interpreted as being due to internal gravity waves propagating in the neutral atmosphere. The disturbances characterized by vertical velocity perturbations of the order of 100 m/s and horizontal wave lengths along the satellite path of about 500 km. They often extend across the entire polar cap. The associated temperature perturbations indicate that the horizontal phase progression is from the nightside to the dayside. Vertical displacements are inferred to be of the order of 10 km and the periods to be of the order of 10(exp 3) s. The waves must propagate in the neutral atmosphere, but they usually are most clearly recognizable in the observations of ion vertical velocity and ion temperature. By combining the neutral pressure calculated from the observed neutral concentration and temperature with the vertical component of the neutral velocity, an upward energy flux of the order of 0.04 erg/sq cm-s at 250 km has been calculated, which is about equal to the maximum total solar ultraviolet heat input above that altitude. Upward energy fluxes calculated from observations on orbital passes at altitudes from 250 to 560 km indicate relatively little attenuation with altitude.

  15. Full 40 km crustal reflection seismic datasets in several Indonesian basins

    NASA Astrophysics Data System (ADS)

    Dinkelman, M. G.; Granath, J. W.; Christ, J. M.; Emmet, P. A.; Bird, D. E.

    2010-12-01

    Long offset, deep penetration regional 2D seismic data sets have been acquired since 2002 by GX Technology in a number of regions worldwide (www.iongeo.com/Data_Libraries/Spans/). Typical surveys consist of 10+ lines located to image specific critical aspects of basin structure. Early surveys were processed to 20 km, but more recent ones have extended to 40-45 km from 16 sec records. Pre-stack time migration is followed by pre-stack depth migration using gravity and in some cases magnetic modeling to constrain the velocity structure. We illustrate several cases in the SE Asian and Australasian area. In NatunaSPAN™ two generations of inversion can be distinguished, one involving Paleogene faults with Neogene inversion and one involving strike slip-related uplift in the West Natuna Basin. Crustal structure in the very deep Neogene East Natuna Basin has also been imaged. The JavaSPAN™ program traced Paleogene sediments onto oceanic crust of the Flores Sea, thus equating back arc spreading there to the widespread Eocene extension. It also imaged basement in the Makassar Strait beneath as much as 6 km of Cenozoic sedimentary rocks that accumulated Eocene rift basins (the North and South Makassar basins) on the edge of Sundaland, the core of SE Asia. The basement is seismically layered: a noisy upper crust overlies a prominent 10 km thick transparent zone, the base of which marks another change to slightly noisier reflectivity. Eocene normal faults responsible for the opening of extensional basins root in the top of the transparent layer which may be Moho or a brittle-ductile transition within the extended continental crust. Of particular significance is the first image of thick Precambrian basins comprising the bulk of continental crust under the Arafura Sea in the ArafuraSPAN™ program. Four lines some 1200 km long located between Australia and New Guinea on the Arafura platform image a thin Phanerozoic section overlying a striking Precambrian basement composed of

  16. Adsorption and thermal decomposition of 2-octylthieno[3,4-b]thiophene on Au(111).

    PubMed

    Park, Joon B; Zong, Kyukwan; Jeon, Il Chul; Hahn, Jae Ryang; Stacchiola, Dario; Starr, David; Müller, Kathrin; Noh, Jaegeun

    2012-10-15

    The adsorption and thermal stability of 2-octylthieno[3,4-b]thiophene (OTTP) on the Au(111) surfaces have been studied using scanning tunneling microscopy (STM), temperature programmed desorption (TPD), and X-ray photoelectron spectroscopy (XPS). UHV-STM studies revealed that the vapor-deposited OTTP on Au(111) generated disordered adlayers with monolayer thickness even at saturation coverage. XPS and TPD studies indicated that OTTP molecules on Au(111) are stable up to 450 K and further heating of the sample resulted in thermal decomposition to produce H(2) and H(2)S via C-S bond scission in the thieno-thiophene rings. Dehydrogenation continues to occur above 600 K and the molecules were ultimately transformed to carbon clusters at 900 K. Highly resolved air-STM images showed that OTTP adlayers on Au(111) prepared from solution are composed of a well-ordered and low-coverage phase where the molecules lie flat on the surface, which can be assigned as a (9×2√33)R5° structure. Finally, based on analysis of STM, TPD, and XPS results, we propose a thermal decomposition mechanism of OTTP on Au(111) as a function of annealing temperature. PMID:22818203

  17. Depressed mantle discontinuities beneath Iceland: Evidence of a garnet controlled 660 km discontinuity?

    NASA Astrophysics Data System (ADS)

    Jenkins, J.; Cottaar, S.; White, R. S.; Deuss, A.

    2016-01-01

    The presence of a mantle plume beneath Iceland has long been hypothesised to explain its high volumes of crustal volcanism. Practical constraints in seismic tomography mean that thin, slow velocity anomalies representative of a mantle plume signature are difficult to image. However it is possible to infer the presence of temperature anomalies at depth from the effect they have on phase transitions in surrounding mantle material. Phase changes in the olivine component of mantle rocks are thought to be responsible for global mantle seismic discontinuities at 410 and 660 km depth, though exact depths are dependent on surrounding temperature conditions. This study uses P to S seismic wave conversions at mantle discontinuities to investigate variation in topography allowing inference of temperature anomalies within the transition zone. We employ a large data set from a wide range of seismic stations across the North Atlantic region and a dense network in Iceland, including over 100 stations run by the University of Cambridge. Data are used to create over 6000 receiver functions. These are converted from time to depth including 3D corrections for variations in crustal thickness and upper mantle velocity heterogeneities, and then stacked based on common conversion points. We find that both the 410 and 660 km discontinuities are depressed under Iceland compared to normal depths in the surrounding region. The depression of 30 km observed on the 410 km discontinuity could be artificially deepened by un-modelled slow anomalies in the correcting velocity model. Adding a slow velocity conduit of -1.44% reduces the depression to 18 km; in this scenario both the velocity reduction and discontinuity topography reflect a temperature anomaly of 210 K. We find that much larger velocity reductions would be required to remove all depression on the 660 km discontinuity, and therefore correlated discontinuity depressions appear to be a robust feature of the data. While it is not possible

  18. The -145 km/S Absorption System of Eta Carinae

    NASA Technical Reports Server (NTRS)

    Vieira, G.; Gull, T. R.; Danks, A.; Johansson, S.

    2002-01-01

    With the STIS E230H mode (R-118,000) , we have identified about twenty absorption components in line of sight from Eta Carinae. Two components, one at -513 km/s and another at -145 W s , are quite different in character from the others, mostly at intermediate velocities. The -145 km/s component is significantly wider in fwhm, is seen in many more species, and the lower level can be above 20,000/cm, well above the 2000/cm noted in the -513 km/s component. In the spectral region from 2400 to 3160A, approximately 500 absorption lines have been identified. In this poster, we will present line identifications and atomic parameters of the measured lines, hopefully providing insight as to what levels are being excited and by what processes.

  19. Greener and rapid access to bio-active heterocycles: one-pot solvent-free synthesis of 1,3,4-oxadiazoles and 1,3,4-thiadiazoles

    EPA Science Inventory

    A novel one-pot solvent free synthesis of 1,3,4-oxadiazoles and 1,3,4-thiadiazoles by condensation of acid hydrazide and triethyl orthoalkanates under microwave irradiations is reported. This green protocol was catalyzed efficiently by solid supported Nafion®NR50 and phosphorus p...

  20. Evaluation of triggering schemes for KM3NeT

    NASA Astrophysics Data System (ADS)

    Seitz, T.; Herold, B.; Shanidze, R.

    2013-10-01

    The future neutrino telescope KM3NeT, to be built in the Mediterranean Sea, will be the largest of its kind. It will include nearly two hundred thousand photomultiplier tubes (PMT) mounted in multi-PMT digital optical modules (DOM). The dominant source of the PMT signals is decays of 40K and marine fauna bioluminescence. Selection of neutrino and muon events from this continuous optical background signals requires the implementation of fast and efficient triggers. Various schemes for the filtering of background data and the selection of neutrino and muon events were evaluated for the KM3NeT telescope using Monte Carlo simulations.

  1. Simulation of CO2 release at 800 km altitude

    NASA Astrophysics Data System (ADS)

    Setayesh, A.

    1993-08-01

    The SOCRATES contamination-interaction code has been used to simulate the reactions of 0 + CO2 yields CO2(v) + O, O + CO2 - CO(v) + O2, and CO2 + H - CO + OH(v) at an altitude of 800 km in both ram and wake directions of the spacecraft. These simulations show that the radiation from these reactions can be measurable for the parameters which have been used in these calculations. The investigation carries out the simulations as much as 30 km from the spacecraft. The radiative intensity of CO(v) and OH(v) show the highest and lowest, respectively.

  2. Cascade sensitivity studies for KM3NeT

    NASA Astrophysics Data System (ADS)

    Fusco, Luigi Antonio

    2016-07-01

    KM3NeT is a future research infrastructure in the deep seas of the Mediterranean housing a large scale neutrino telescope. The first phase of construction of the telescope has started. Next step is an intermediate phase realising a detector volume of about one-third of the final detector volume. We report on calculations of the sensitivity of the KM3NeT detector to showering neutrino events, the strategy to optimise the detector to a cosmic neutrino flux analogous to the one reported by the IceCube Collaboration and the results of this strategy applied to the intermediate phase detector.

  3. [Genetic effects in mice exposed to the 10-km area around the Chernobyl Atomic Energy Station].

    PubMed

    Pomerantseva, M D; Chekhovich, A V; Ramaiĭa, L K; Shevchenko, V A; Shaks, A I; Lobaneva, N V

    1990-10-01

    Mice (CBAxC57BL) F of both sexes were exposed within the 10 km zone of Chernobyl nuclear power station. Genetic damage of phone chronic effect of increased radiation in exposed adult mice and in the course of embryogenesis was studied. The total absorbed radiation doses in testes varied from 1.85 to 0.42 Gy in embryos and from 3.4 to 2.7 Gy in adult males. Increase of dominant lethal mutations (DLM) and abnormal sperm heads (ASH) was only observed right after the end of exposure of adult males. The yield of reciprocal translocations (RT) in these males was relatively low. Among the males exposed at the stage of early embryogenesis, 4 heterozygotes for RT were revealed. In other males of this group the RT yield was low. PMID:2283055

  4. Non-uniform thickness in Europa's icy shell: implications for astrobiology mission design

    NASA Astrophysics Data System (ADS)

    Fairén, A.; Amils, R.

    The exploration of Europa's subsurface ocean is hardly constrained by the presence of an outer ice shell of unknown thickness: a somewhat thin crust would allow easier access to the ocean below. Current estimates for the thickness of Europa's icy surface range from a few km [1] to a few tens of km [2], the shell overlying a liquid water ocean up to 150 km thick [3,4,5]. The surface is believed to be young (mean age of 30-80 Myr [6]) and geologically active [7,8,9], as it is sparsely cratered. Here we report geological evidence indicating that the thickness of Europa's ice crust is actually a complex combination of thicker and thinner areas, highlighting the implications of such structure in the future exploration of the inner ocean. Detailed geologic mapping of impact craters, palimpsests and chaotic terrains distribution on Europa's surface, offers an initial approach to a comprehensive description of the thickness variation in the ice shell. Our analysis is based in: (1) Crater distribution, morphology, diameter and depth. Seminal work by Schenk [2] of transitions in crater shape/diameter suggested enhanced structural collapse of craters with diameter >27-33 km, that will consequently form multiring basins, due to weaker ice or a global ocean at depths >19-25 km. This being true, strictly can only be interpreted regionally: multiring basins indicate regions where the ice shell is thick; in those regions where the icy surface is thin, a bolide impact will breach the ice and leave neither crater nor multiring basin behind, but probably Ganymede's type palimpsests. (2) Palimpsest-type features distribution, indicating regions where the ice shell is too thin to support crater formation after big bolide impacts. In Ganymede, palimpsests are circular, low albedo and relief features formerly formed by impacts [10,11]. (3) Chaotic terrain distribution, considering features tens to hundreds of km across, that may be the evidence for very thin ice areas (from ˜ 2 km to

  5. Thermal thickness and evolution of Precambrian lithosphere: A global study

    USGS Publications Warehouse

    Artemieva, I.M.; Mooney, W.D.

    2001-01-01

    The thermal thickness of Precambrian lithosphere is modeled and compared with estimates from seismic tomography and xenolith data. We use the steady state thermal conductivity equation with the same geothermal constraints for all of the Precambrian cratons (except Antarctica) to calculate the temperature distribution in the stable continental lithosphere. The modeling is based on the global compilation of heat flow data by Pollack et al. [1993] and more recent data. The depth distribution of heat-producing elements is estimated using regional models for ???300 blocks with sizes varying from 1?? ?? 1?? to about 5?? ?? 5?? in latitude and longitude and is constrained by laboratory, seismic and petrologic data and, where applicable, empirical heat flow/heat production relationships. Maps of the lateral temperature distribution at depths 50, 100, and 150 km are presented for all continents except Antarctica. The thermal thickness of the lithosphere is calculated assuming a conductive layer overlying the mantle with an adiabat of 1300??C. The Archean and early Proterozoic lithosphere is found to have two typical thicknesses, 200-220 km and 300-350 km. In general, thin (???220 km) roots are found for Archean and early Proterozoic cratons in the Southern Hemisphere (South Africa, Western Australia, South America, and India) and thicker (>300 km) roots are found in the Northern Hemisphere (Baltic Shield, Siberian Platform, West Africa, and possibly the Canadian Shield). We find that the thickness of continental lithosphere generally decreases with age from >200 km beneath Archean cratons to intermediate values of 200 ?? 50 km in early Proterozoic lithosphere, to about 140 ?? 50 km in middle and late Proterozoic cratons. Using known crustal thickness, our calculated geotherms, and assuming that isostatic balance is achieved at the base of the lithosphere, we find that Archean and early Proterozoic mantle lithosphere is 1.5% less dense (chemically depleted) than the

  6. Subduction of thick crust: the Alaska example (Invited)

    NASA Astrophysics Data System (ADS)

    Abers, G. A.; Kim, Y.; Christensen, D. H.

    2013-12-01

    It is a paradigm of plate tectonics that oceanic lithosphere subducts readily, while lithosphere transporting much thicker continental crust does not. Analyses of plate buoyancy have included a variety of effects, such as eclogitization, crustal compositional stratification, and plate strength, but all lead to the conclusion that crust needs to be thinner than about 15-25 km in order to subduct. A test of this conclusion is underway in southern Alaska, where the Yakutat terrane is being driven by the Pacific plate into the Alaskan margin. Its crust is 15-30 km thick, varying along strike, with a seismic velocity structure resembling an oceanic plateau; thus it spans the predicted limit in thickness of subductable crust. In the eastern thicker part, the terrane appears to be colliding and driving orogenesis in the St. Elias-Chugach ranges, although voluminous volcanism of the Wrangell Volcanic Field may be a consequence of some crust subducting. Farther west, the Yakutat terrane is 15-20 km thick and clearly subducting beneath the Prince William Sound and Kenai Peninsula. It forms the slab subducting beneath the central Alaska Range 400 km inland. The thick crust has been imaged at all depths less than 130 km, through receiver functions, travel-time tomography, and offshore by active-source imaging, with similar structure in most images. Greater than 130 km depth the imaged crust vanishes in seismic images, consistent with predicted depths of eclogitization of weakly hydrated metagabbroic crust, and the lack of a velocity contrast between eclogite and peridotite. Lithosphere including the thick Yakutat crust gives a net buoyancy close to neutral, so its subduction will depend on other factors. The high buoyancy may be responsible for the remarkably shallow dip of the plate at depths less than 50 km, producing one of the widest seismogenic thrust zones on the planet, allowing it to host the great (Mw 9.3) 1964 Gulf of Alaska earthquake. The shallow dip may also aid

  7. Near-infrared spectra and intrinsic luminosities of candidate type II quasars at 2 < z < 3.4

    SciTech Connect

    Greene, Jenny E.; Strauss, Michael A.; Pattarakijwanich, Petchara; Alexandroff, Rachael; Zakamska, Nadia L.; Liu, Guilin; Lang, Dustin; Hamann, Frederick; Ross, Nicholas P.; Myers, Adam D.; Brandt, W. Niel; Schneider, Donald P.; York, Donald

    2014-06-10

    We present JHK near-infrared (NIR) spectroscopy of 25 candidate Type II quasars selected from the Sloan Digital Sky Survey (SDSS), using Triplespec on the Apache Point Observatory 3.5 m telescope, the Folded-port InfraRed Echellette at the Magellan/Baade 6.5 m telescope, and the Gemini Near-Infrared Spectrograph on Gemini. At redshifts of 2 < z < 3.4, our NIR spectra probe the rest-frame optical region of these targets, which were initially selected to have strong lines of C IV and Ly α, with FWHM < 2000 km s{sup –1} from the SDSS pipeline. We use the [O III] λ5007 line shape as a model for the narrow-line region emission and find that Hα consistently requires a broad component with FWHMs ranging from 1000 to 7500 km s{sup –1}. Interestingly, the C IV lines also require broad bases, but with considerably narrower widths of 1000-4500 km s{sup –1}. Estimating the extinction using the Balmer decrement and also the relationship in lower-z quasars between rest equivalent width and luminosity in the [O III] line, we find typical A{sub V} values of 0-2 mag, which naturally explains the attenuated C IV lines relative to Hα. We propose that our targets are moderately obscured quasars. We also describe one unusual object with three distinct velocity peaks in its [O III] spectrum.

  8. Waterway Ice Thickness Measurements

    NASA Technical Reports Server (NTRS)

    1978-01-01

    The ship on the opposite page is a U. S. Steel Corporation tanker cruising through the ice-covered waters of the Great Lakes in the dead of winter. The ship's crew is able to navigate safely by plotting courses through open water or thin ice, a technique made possible by a multi-agency technology demonstration program in which NASA is a leading participant. Traditionally, the Great Lakes-St. Lawrence Seaway System is closed to shipping for more than three months of winter season because of ice blockage, particularly fluctuations in the thickness and location of ice cover due to storms, wind, currents and variable temperatures. Shippers have long sought a system of navigation that would allow year-round operation on the Lakes and produce enormous economic and fuel conservation benefits. Interrupted operations require that industrial firms stockpile materials to carry them through the impassable months, which is costly. Alternatively, they must haul cargos by more expensive overland transportation. Studies estimate the economic benefits of year-round Great Lakes shipping in the hundreds of millions of dollars annually and fuel consumption savings in the tens of millions of gallons. Under Project Icewarn, NASA, the U.S. Coast Guard and the National Oceanic Atmospheric Administration collaborated in development and demonstration of a system that permits safe year-round operations. It employs airborne radars, satellite communications relay and facsimile transmission to provide shippers and ships' masters up-to-date ice charts. Lewis Research Center contributed an accurate methods of measuring ice thickness by means of a special "short-pulse" type of radar. In a three-year demonstration program, Coast Guard aircraft equipped with Side-Looking Airborne Radar (SLAR) flew over the Great Lakes three or four times a week. The SLAR, which can penetrate clouds, provided large area readings of the type and distribution of ice cover. The information was supplemented by short

  9. Castro ring zone: a 4,500-km2 fossil hydrothermal system in the Challis volcanic field, central Idaho.

    USGS Publications Warehouse

    Criss, R.E.; Ekren, E.B.; Hardyman, R.F.

    1984-01-01

    The largest fossil hydrothermal system occupying a 4500 km2 area in central Idaho is revealed by delta 18O studies. The remains of this meteoric-hydrothermal system are preserved within a sharply bounded, 15 km wide, 70-km-diameter annulus of low delta 18O rock (+2.0 to -8.8per mille) termed the Castro ring zone. The zone is centred on a less depleted (+4.5) core zone consisting of granitic rocks of the Castro pluton. This 700-km2 Eocene subvolcanic batholith has intruded, domed, and hydrothermally metamorphosed a thick sequence of Challis Volcanics, the stratigraphically low rocks in the 2000-km2 Van Horn Peak and the 1000-km2 Thunder Mountain cauldron complexes being most strongly altered. Less extreme 18O depletions occur in the youngest major ash-flow sheets of these complexes, indicating a vertical 18O gradient. Water/rock ratios of geothermal systems are surprisingly insensitive to the circulation scale.-L.-di H.

  10. Gravity wave vertical energy flux at 95 km

    NASA Technical Reports Server (NTRS)

    Jacob, P. G.; Jacka, F.

    1985-01-01

    A three-field photometer (3FP) located at Mt. Torrens near Adelaide, is capable of monitoring different airglow emissions from three spaced fields in the sky. A wheel containing up to six different narrow bandpass interference filters can be rotated, allowing each of the filters to be sequentially placed into each of the three fields. The airglow emission of interest is the 557.7 nm line which has an intensity maximum at 95 km. Each circular field of view is located at the apexes of an equilateral triangle centered on zenith with diameters of 5 km and field separations of 13 km when projected to the 95-km level. The sampling period was 30 seconds and typical data lengths were between 7 and 8 hours. The analysis and results from the interaction of gravity waves on the 557.7 nm emission layer are derived using an atmospheric model similar to that proposed by Hines (1960) where the atmosphere is assumed isothermal and perturbations caused by gravity waves are small and adiabatic, therefore, resulting in linearized equations of motion. In the absence of waves, the atmosphere is also considered stationary. Thirteen nights of quality data from January 1983 to October 1984, covering all seasons, are used in this analysis.

  11. The KM3NeT neutrino telescope

    NASA Astrophysics Data System (ADS)

    de Jong, M.; KM3NeT Consortium

    2010-11-01

    KM3NeT is a deep-sea research infrastructure to be constructed in the Mediterranean Sea hosting a neutrino telescope with a volume of at least one cubic kilometre. The scientific case for a neutrino telescope of a cubic kilometre scale is overwhelming. The infrastructure it requires will be shared by a host of other sciences, making continuous and long-term measurements in the fields of oceanography, geophysics, and marine biological sciences possible. The feasibility of neutrino astronomy with a detector in the deep sea was proven by the successful deployment and operation of the ANTARES prototype detector. The potential of the detection technique, based on the reconstruction of the tracks of muons, the possible reaction products of the sought after neutrinos, has been demonstrated. With two other pilot projects, NEMO and NESTOR, different detector configurations and techniques were explored. The three projects have provided a wealth of information on the technologies required for a large deep-sea neutrino telescope. KM3NeT will reap the benefits. It is planned to make KM3NeT a CO2-neutral facility, using wind or solar energy to supply the required power for the underwater system as well as the shore station. The proposed infrastructure will be built by a European consortium (KM3NeT). The total cost is estimated at 220-250 M€.

  12. The -145 km/s Absorption System of Eta Carinae

    NASA Astrophysics Data System (ADS)

    Vieira, G. L.; Gull, T. R.; Danks, A. C.; Johansson, S.

    2002-12-01

    With the STIS E230H mode (R 118,000), we have identified about twenty absorption components in line of sight from Eta Carinae. Two components, one at -513 km/s and another at -145 km/s, are quite different in character from the others, mostly at intermediate velocities (See adjacent posters by T. Gull and A. Danks). The -145 km/s component is significantly wider in fwhm, is seen in many more species, and the lower level can be above 20,000 cm-1, well above the 2000 cm-1 noted in the -513 km/s component. In the spectral region from 2400 to 3160A, approximately 500 absorption lines have been identified. In this poster, we will present line identifications and atomic parameters of the measured lines, hopefully providing insight as to what levels are being excited and by what processes. Observations were accomplished through STScI under proposal 9242 (Danks, P.I.). Funding is through the STIS GTO resources.

  13. Models of earth's atmosphere (90 to 2500 km)

    NASA Technical Reports Server (NTRS)

    1973-01-01

    This monograph replaces a monograph on the upper atmosphere which was a computerized version of Jacchia's model. The current model has a range from 90 to 2500 km. In addition to the computerized model, a quick-look prediction method is given that may be used to estimate the density for any time and spatial location without using a computer.

  14. Body Composition Measurements of 161-km Ultramarathon Participants

    Technology Transfer Automated Retrieval System (TEKTRAN)

    This study compares body composition characteristics with performance among participants in a 161-km trail ultramarathon. Height, mass, and percent body fat from bioimpedence spectroscopy were measured on 72 starters. Correlation analyses were used to compare body characteristics with finish time, ...

  15. 22 CFR 3.4 - Restriction on acceptance of gifts and decorations.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 22 Foreign Relations 1 2012-04-01 2012-04-01 false Restriction on acceptance of gifts and decorations. 3.4 Section 3.4 Foreign Relations DEPARTMENT OF STATE GENERAL GIFTS AND DECORATIONS FROM FOREIGN GOVERNMENTS § 3.4 Restriction on acceptance of gifts and decorations. (a) An employee is prohibited...

  16. 45 CFR 3.4 - False reports and reports of injury or damage.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 45 Public Welfare 1 2012-10-01 2012-10-01 false False reports and reports of injury or damage. 3.4 Section 3.4 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL ADMINISTRATION CONDUCT OF PERSONS AND TRAFFIC ON THE NATIONAL INSTITUTES OF HEALTH FEDERAL ENCLAVE General § 3.4 False reports...

  17. 45 CFR 3.4 - False reports and reports of injury or damage.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 45 Public Welfare 1 2011-10-01 2011-10-01 false False reports and reports of injury or damage. 3.4 Section 3.4 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL ADMINISTRATION CONDUCT OF PERSONS AND TRAFFIC ON THE NATIONAL INSTITUTES OF HEALTH FEDERAL ENCLAVE General § 3.4 False reports...

  18. 45 CFR 3.4 - False reports and reports of injury or damage.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 45 Public Welfare 1 2014-10-01 2014-10-01 false False reports and reports of injury or damage. 3.4 Section 3.4 Public Welfare Department of Health and Human Services GENERAL ADMINISTRATION CONDUCT OF PERSONS AND TRAFFIC ON THE NATIONAL INSTITUTES OF HEALTH FEDERAL ENCLAVE General § 3.4 False reports...

  19. 45 CFR 3.4 - False reports and reports of injury or damage.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 45 Public Welfare 1 2010-10-01 2010-10-01 false False reports and reports of injury or damage. 3.4 Section 3.4 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL ADMINISTRATION CONDUCT OF PERSONS AND TRAFFIC ON THE NATIONAL INSTITUTES OF HEALTH FEDERAL ENCLAVE General § 3.4 False reports...

  20. 45 CFR 3.4 - False reports and reports of injury or damage.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 45 Public Welfare 1 2013-10-01 2013-10-01 false False reports and reports of injury or damage. 3.4 Section 3.4 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL ADMINISTRATION CONDUCT OF PERSONS AND TRAFFIC ON THE NATIONAL INSTITUTES OF HEALTH FEDERAL ENCLAVE General § 3.4 False reports...

  1. 43 CFR 2812.3-4 - Where no road use agreement is required.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 43 Public Lands: Interior 2 2011-10-01 2011-10-01 false Where no road use agreement is required. 2812.3-4 Section 2812.3-4 Public Lands: Interior Regulations Relating to Public Lands (Continued... LOGGING ROADS Over O. and C. and Coos Bay Revested Lands § 2812.3-4 Where no road use agreement...

  2. 43 CFR 2812.3-4 - Where no road use agreement is required.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 43 Public Lands: Interior 2 2013-10-01 2013-10-01 false Where no road use agreement is required. 2812.3-4 Section 2812.3-4 Public Lands: Interior Regulations Relating to Public Lands (Continued... LOGGING ROADS Over O. and C. and Coos Bay Revested Lands § 2812.3-4 Where no road use agreement...

  3. 43 CFR 2812.3-4 - Where no road use agreement is required.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 43 Public Lands: Interior 2 2014-10-01 2014-10-01 false Where no road use agreement is required. 2812.3-4 Section 2812.3-4 Public Lands: Interior Regulations Relating to Public Lands (Continued... LOGGING ROADS Over O. and C. and Coos Bay Revested Lands § 2812.3-4 Where no road use agreement...

  4. 43 CFR 2812.3-4 - Where no road use agreement is required.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 43 Public Lands: Interior 2 2012-10-01 2012-10-01 false Where no road use agreement is required. 2812.3-4 Section 2812.3-4 Public Lands: Interior Regulations Relating to Public Lands (Continued... LOGGING ROADS Over O. and C. and Coos Bay Revested Lands § 2812.3-4 Where no road use agreement...

  5. 28 CFR 3.4 - Registration to be made by letter.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 28 Judicial Administration 1 2010-07-01 2010-07-01 false Registration to be made by letter. 3.4 Section 3.4 Judicial Administration DEPARTMENT OF JUSTICE GAMBLING DEVICES § 3.4 Registration to be made by letter. No special forms are prescribed for the purpose of registering under the Act....

  6. Radar Interferometric Possibilities for Determining Sea Ice Thickness

    NASA Astrophysics Data System (ADS)

    Hensley, S.; Holt, B.; Jaruwatanadilok, S.; Steward, J.; Oveisgharan, S.; Moller, D.; Mahoney, A. R.; Reis, J.

    2014-12-01

    Sea ice thickness is a primary indicator of climate change in the polar oceans, as the thickness is a time-integrated result of both thermodynamic and dynamic processes. The large-scale ocean and atmospheric forcing acts on the fine-scale (a few to 10s of meters) opening and closing of the sea ice cover along fractures. The mean thickness and variance of sea thickness at km scales (50 cm uncertainty) are derived from recent spaceborne observations from the ICESat lidar and in the Arctic from sporadic upward looking sonar measurements. However, accurate measurements of sea ice thickness at the fine-scales at which the forcing is occurring are virtually non-existent. In this paper we explore two potential radar interferometric means of obtaining sea ice thickness. One method uses high frequency Ka-band (8.5 mm wavelength) to infer sea ice thickness by measuring elevations to the surface of the ice and to the ocean surface in nearby open leads. Data from the NASA Glistin radar is used to illustrate this methodology. Alternatively, we consider the use of dual frequency X-band and P-band (3 cm and 85 cm wavelengths) to exploit the differential penetration of longer versus shorter wavelength to estimate sea ice thickness. This technique is illustrated with data collected by the Furgo Earthdata GeoSAR system. Portions of this research were conducted at the Jet Propulsion Laboratory, California Institute of Technology, under contract with the National Aeronautics and Space Administration.

  7. Regional anomalies of sediment thickness, basement depth and isostatic crustal thickness in the North Atlantic Ocean

    NASA Astrophysics Data System (ADS)

    Louden, Keith E.; Tucholke, Brian E.; Oakey, Gordon N.

    2004-07-01

    We calculate the anomalous basement topography for the North Atlantic Ocean from 30° to 70°N latitude and from 0° to 70°W longitude at a resolution of roughly 6×6 km, using grids of total sediment thickness and observed and predicted sea-floor bathymetry to correct for the effects of isostatic sediment loading and lithospheric age. Plotting this residual topography for various plate reconstructions during opening of the North Atlantic, we delineate consistent patterns of basement highs related to variations in hotspot-related volcanism. In addition to Iceland and the Azores, we recognize three centers of excess volcanism at the mid-Atlantic ridge: the Milne Seamounts and Azores-Biscay Rise (˜75-40 Ma), the Southeast Newfoundland Ridge and Madeira-Tore Rise (˜130-110 Ma), and the East and West Thulean Rises (˜60-50 Ma). The duration of volcanic activity ranges from 8 to 10 m.y. (Thulean Rises) to 60 m.y. (Iceland) and thus it appears that both long- and short-lived hotspots coexist, even in relatively close proximity. In contrast, during the period 110-60 Ma we observe little excess volcanism during either continental breakup or seafloor spreading. We estimate isostatic crustal thickness from the anomalous basement depths, after first removing dynamic effects created by mantle flow. Maximum thicknesses of volcanic features, from 30 km beneath the Greenland-Iceland-Faeroe ridge to ˜15 km beneath the Azores-Biscay Rise, are broadly consistent with seismic data and predictions of decompression melting. Widths of volcanic features indicate that thickening primarily occurs within 100-200 km of hotspots except along continental margins that rifted at the time of the hotspot activity (i.e. East Greenland and the Hatton-Rockall Bank). We observe conjugate structures south of Greenland and Edoras Bank, where excess volcanism appears to have extended beyond the margin proper and into oceanic crust. Similar conjugate features appear in the Labrador Sea south of Davis

  8. Redox reaction between amino-(3,4-dihydroxyphenyl)methyl phosphonic acid and dopaquinone is responsible for the apparent inhibitory effect on tyrosinase.

    PubMed

    Gasowska, Beata; Wojtasek, Hubert; Hurek, Józef; Drag, Marcin; Nowak, Kornel; Kafarski, Paweł

    2002-08-01

    Amino-(3,4-dihydroxyphenyl)methyl phosphonic acid, the phosphonic analog of 3,4-dihydroxyphenylglycine, had been previously reported as a potent inhibitor of tyrosinase. The mechanism of the apparent enzyme inhibition by this compound has now been established. Amino-(3,4-dihydroxyphenyl)methyl phosphonic acid turned out to be a substrate and was oxidized to o-quinone, which evolved to a final product identified as 3,4-dihydroxybenzaldehyde, the same as for 3,4-dihydroxyphenylglycine. Monohydroxylated compounds (amino-(3-hydroxyphenyl)methyl phosphonic acid and amino-(4-hydroxyphenyl)methyl phosphonic acid) were not oxidized, neither was 4-hydroxy-l-phenylglycine. However, the relatively high Km for amino-(3,4-dihydroxyphenyl)methyl phosphonic acid (0.52 mm) indicated that competitive inhibition could not entirely explain the previously reported strong inhibitory effect (Ki = 50 and 97 micro m for tyrosine and 3-(3,4-dihydroxyphenyl)alanine (Dopa) as substrates, respectively). Neither was the enzyme covalently inactivated to a significant degree. Spectroscopic and electrochemical analysis of the oxidation of a mixture of Dopa and the inhibitor demonstrated that the phosphonic compound reduced dopaquinone back to Dopa, thus diminishing and delaying the formation of dopachrome. This produces an apparent strong inhibitory effect when the reaction is monitored spectrophotometrically at 475 nm. In this peculiar case Dopa acts as a redox shuttle mediating the oxidation of the shorter phosphonic homolog. Decomposition of the phosphonic o-quinone to 3,4-dihydroxybenzaldehyde drives the reaction against the slightly unfavorable difference in redox potentials. PMID:12180986

  9. Caffeine and 3-km cycling performance: Effects of mouth rinsing, genotype, and time of day.

    PubMed

    Pataky, M W; Womack, C J; Saunders, M J; Goffe, J L; D'Lugos, A C; El-Sohemy, A; Luden, N D

    2016-06-01

    We assessed the efficacy of caffeine mouth rinsing on 3-km cycling performance and determined whether caffeine mouth rinsing affects performance gains influenced by the CYP1A2 polymorphism. Thirty-eight recreational cyclists completed four simulated 3-km time trials (TT). Subjects ingested either 6 mg/kg BW of caffeine or placebo 1 h prior to each TT. Additionally, 25 mL of 1.14% caffeine or placebo solution were mouth rinsed before each TT. The treatments were Placebo, caffeine Ingestion, caffeine Rinse and Ingestion+Rinse. Subjects were genotyped and classified as AA homozygotes or AC heterozygotes for the rs762551 polymorphism of the CYP1A2 gene involved in caffeine metabolism. Magnitude-based inferences were used to evaluate treatment differences in mean power output based on a predetermined meaningful treatment effect of 1.0%. AC heterozygotes (4.1%) and AA homozygotes (3.4%) benefited from Ingestion+Rinse, but only AC performed better with Ingestion (6.0%). Additionally, Rinse and Ingestion+Rinse elicited better performance relative to Placebo among subjects that performed prior to 10:00 h (Early) compared with after 10:00 h (Late). The present study provides additional evidence of genotype and time of day factors that affect the ergogenic value of caffeine intake that may allow for more personalized caffeine intake strategies to maximize performance. PMID:26062916

  10. The marine polyketide myriaporone 3/4 stalls translation by targeting the elongation phase.

    PubMed

    Muthukumar, Yazh; Roy, Myriam; Raja, Aruna; Taylor, Richard E; Sasse, Florenz

    2013-01-21

    Myriaporone 3/4, a cytotoxic polyketide, has been reported as an inhibitor of eukaryotic protein synthesis. However, the mechanism by which it inhibits translation was unknown. Here we show that myriaporone 3/4 stalls protein synthesis in the elongation phase by inducing phosphorylation of eukaryotic elongation factor 2. The phosphorylation results from direct binding of myriaporone 3/4 to eukaryotic elongation factor 2 kinase. Our study also shows that myriaporone 3/4 in the nanomolar range inhibits in vitro tube formation by endothelial cells without being cytotoxic. In general, myriaporone 3/4 was at least 300 times less toxic to primary cells than to tumor cells. PMID:23303710

  11. Determination of Ice Crust Thickness from Flanking Cracks Along Ridges on Europa

    NASA Technical Reports Server (NTRS)

    Billings, S. E.; Kattenhorn, S. A.

    2002-01-01

    We use equations describing the deflection of an elastic plate below a line load to estimate ice crust thickness below ridges on Europa. Using a range of elastic parameters, ice thickness is calculated to fall in the range 0.2 2.6 km. Additional information is contained in the original extended abstract.

  12. A relative sea-level history for Arviat, Nunavut, and implications for Laurentide Ice Sheet thickness west of Hudson Bay

    NASA Astrophysics Data System (ADS)

    Simon, Karen M.; James, Thomas S.; Forbes, Donald L.; Telka, Alice M.; Dyke, Arthur S.; Henton, Joseph A.

    2014-07-01

    Thirty-six new and previously published radiocarbon dates constrain the relative sea-level history of Arviat on the west coast of Hudson Bay. As a result of glacial isostatic adjustment (GIA) following deglaciation, sea level fell rapidly from a high-stand of nearly 170 m elevation just after 8000 cal yr BP to 60 m elevation by the mid Holocene (~ 5200 cal yr BP). The rate of sea-level fall decreased in the mid and late Holocene, with sea level falling 30 m since 3000 cal yr BP. Several late Holocene sea-level measurements are interpreted to originate from the upper end of the tidal range and place tight constraints on sea level. A preliminary measurement of present-day vertical land motion obtained by repeat Global Positioning System (GPS) occupations indicates ongoing crustal uplift at Arviat of 9.3 ± 1.5 mm/yr, in close agreement with the crustal uplift rate inferred from the inferred sea-level curve. Predictions of numerical GIA models indicate that the new sea-level curve is best fit by a Laurentide Ice Sheet reconstruction with a last glacial maximum peak thickness of ~ 3.4 km. This is a 30-35% thickness reduction of the ICE-5G ice-sheet history west of Hudson Bay.

  13. KM3NeT-ARCA project status and plan

    NASA Astrophysics Data System (ADS)

    Coniglione, R.

    2016-04-01

    The KM3NeT Collaboration aims at building a research infrastructure in the depths of the Mediterranean Sea hosting a cubic kilometre neutrino telescope. The KM3NeT/ARCA detector is the ideal instrument to look for high-energy neutrino sources thanks to the latitude of the detector and to the optical characteristics of the sea water. The detector latitude allows for a wide coverage of the observable sky including the region of the Galactic centre and the optical sea water properties allow for the measure of the neutrino direction with excellent angular resolution also for cascade events. The technologically innovative components of the detector and the status of construction will be presented as well as the capability it offers to discover neutrinos.

  14. Neutral winds above 200 km at high latitudes.

    NASA Technical Reports Server (NTRS)

    Meriwether, J. W.; Heppner, J. P.; Stolarik, J. D.; Wescott, E. M.

    1973-01-01

    Electrically neutral, luminous clouds are a by-product of chemical releases conducted to create barium ion clouds for the measurement of electric fields. Wind measurements provided by the motions of these clouds are particularly valuable in that the motions can be directly compared with convective ion drift motions to test the importance of ion drag forces. Motion from multiple releases between 200 and 300 km from 15 rockets launched from four high-latitude locations is analyzed in this paper. The observations in the evening and midnight hours at magnetic latitudes above 65 deg strongly suggest that in these regions ion drag is the dominant force in driving neutral winds between 200 and 300 km. In the morning sector, it is evident that neutral wind observations cannot be directly interpreted in terms of ion drag; other factors must be considered.

  15. Fact Sheet for KM200 Front-end Electronics

    SciTech Connect

    Ianakiev, Kiril Dimitrov; Iliev, Metodi; Swinhoe, Martyn Thomas

    2015-07-08

    The KM200 device is a versatile, configurable front-end electronics boards that can be used as a functional replacement for Canberra’s JAB-01 boards based on the Amptek A-111 hybrid chip, which continues to be the preferred choice of electronics for large number of the boards in junction boxes of multiplicity counters that process the signal from an array of 3He detectors. Unlike the A-111 chip’s fixed time constants and sensitivity range, the shaping time and sensitivity of the new KM200 can be optimized for demanding applications such as spent fuel, and thus could improve the safeguards measurements of existing systems where the A-111 or PDT electronics does not perform well.

  16. Remote (250 km) Fiber Bragg Grating Multiplexing System

    PubMed Central

    Fernandez-Vallejo, Montserrat; Rota-Rodrigo, Sergio; Lopez-Amo, Manuel

    2011-01-01

    We propose and demonstrate two ultra-long range fiber Bragg grating (FBG) sensor interrogation systems. In the first approach four FBGs are located 200 km from the monitoring station and a signal to noise ratio of 20 dB is obtained. The second improved version is able to detect the four multiplexed FBGs placed 250 km away, offering a signal to noise ratio of 6–8 dB. Consequently, this last system represents the longest range FBG sensor system reported so far that includes fiber sensor multiplexing capability. Both simple systems are based on a wavelength swept laser to scan the reflection spectra of the FBGs, and they are composed by two identical-lengths optical paths: the first one intended to launch the amplified laser signal by means of Raman amplification and the other one is employed to guide the reflection signal to the reception system. PMID:22164101

  17. Real Km-synthesis via generalized Popov multipliers

    NASA Technical Reports Server (NTRS)

    Chiang, R. Y.; Safonov, M. G.

    1992-01-01

    The authors refine their H-infinity control designs presented at the 1990 and 1991 American Control Conference by introducing a new real Km-synthesis technique involving the use of generalized Popov multipliers. This multiplier technique substantially reduces, and in some cases may even eliminate altogether, the conservativeness associated with traditional Km-synthesis solutions in which all uncertainties are treated as complex, even when they arise from real parameters such as the masses and spring constants in the benchmark problem. The design results demonstrate how this approach permits a very precise analysis of the intrinsic tradeoffs between robustness, performance, and control energy requirements. Also included is an open-loop H-infinity prefilter design that makes it possible to address the command response shaping issue. The design concept has been applied to the benchmark problem no. 4 and successfully removes the initial undesired transient and cuts down the percent overshoot.

  18. Quantum Cryptography Over 24 km of Underground Optical Fibers

    NASA Astrophysics Data System (ADS)

    Hughes, Richard; Luther, Gabriel; Morgan, George; Peterson, Charles; Simmons, Charles

    1997-04-01

    The secure distribution of the secret random bit sequences known as ''key'' material, is an essential precursor to their use for the encryption and decryption of confidential communications. Quantum cryptography is an emerging technology for secure key distribution with single-photon transmissions: Heisenberg's uncertainty principle ensures that an adversary can neither successfully tap the key transmissions, nor evade detection (eavesdropping raises the key error rate above a threshold value). We are performing quantum cryptography over 24-km of underground optical fiber using non-orthogonal single-photon interference states. Key material is built up by transmitting a single-photon per bit of an initial secret random sequence. A quantum-mechanically random subset of this sequence is identified, becoming the key material after a data reconciliation stage with the sender. Our experiment demonstrates that secure, real-time key generation over "open" multi-km node-to-node optical fiber communications links is feasible.

  19. Towards a 1km resolution global flood risk model

    NASA Astrophysics Data System (ADS)

    Bates, Paul; Neal, Jeff; Sampson, Chris; Smith, Andy

    2014-05-01

    Recent advances in computationally efficient numerical algorithms and new High Performance Computing architectures now make high (1-2km) resolution global hydrodynamic models a realistic proposition. However in many areas of the world the data sets and tools necessary to undertake such modelling do not currently exist. In particular, five major problems need to be resolved: (1) the best globally available terrain data (SRTM) was generated from X-band interferometric radar data which does not penetrate vegetation canopies and which has significant problems in determining ground elevations in urban areas; (2) a global river bathymetry data set does not currently exist; (3) most river channels globally are less than the smallest currently resolvable grid scale (1km) and therefore require a sub-grid treatment; (4) a means to estimate the magnitude of the T year flood at any point along the global river network does not currently exist; and (5) a large proportion of flood losses are generated by off-floodplain surface water flows which are not well represented in current hydrodynamic modelling systems. In this paper we propose solutions to each of these five issues as part of a concerted effort to develop a 1km (or better) resolution global flood hazard model. We describe the new numerical algorithms, computer architectures and computational resources used, and demonstrate solutions to the five previously intractable problems identified above. We conduct a validation study of the modelling against satellite imagery of major flooding on the Mississippi-Missouri confluence plain in the central USA before outlining a proof-of-concept regional study for SE Asia as a step towards a global scale model. For SE Asia we simulate flood hazard for ten different flood return periods over the entire Thailand, Cambodia, Vietnam, Malaysia and Laos region at 1km resolution and show that the modelling produces coherent, consistent and sensible simulations of extent and water depth.

  20. Organizations, Paradigms, and People: The Challenge of KM Interventions

    NASA Technical Reports Server (NTRS)

    Bailey, Teresa; Burton, Yvette

    1999-01-01

    This paper presents viewgraphs on Knowledge Management (KM) and how these interventions are put into practice by organizations and society. The topics include: 1) The Multiple Paradigm Tool; 2) Four Paradigms: tool for the Analyzing Organizations; 3) Assumptions About the Nature of Social Science; 4) Assumptions About the Nature of Society; 5) Schools of Sociological and Organizational Theory; 6) Meaning and Metaphors in the Four Paradigms; and 7) Possibilities and Conclusions.

  1. Kinematic characteristics of elite men's 50 km race walking.

    PubMed

    Hanley, Brian; Bissas, Athanassios; Drake, Andrew

    2013-01-01

    Race walking is an endurance event which also requires great technical ability, particularly with respect to its two distinguishing rules. The 50 km race walk is the longest event in the athletics programme at the Olympic Games. The aims of this observational study were to identify the important kinematic variables in elite men's 50 km race walking, and to measure variation in those variables at different distances. Thirty men were analysed from video data recorded during a World Race Walking Cup competition. Video data were also recorded at four distances during the European Cup Race Walking and 12 men analysed from these data. Two camcorders (50 Hz) recorded at each race for 3D analysis. The results of this study showed that walking speed was associated with both step length (r=0.54,P=0.002) and cadence (r=0.58,P=0.001). While placing the foot further ahead of the body at heel strike was associated with greater step lengths (r=0.45,P=0.013), it was also negatively associated with cadence (r= -0.62,P<0.001). In the World Cup, knee angles ranged between 175 and 186° at initial contact and between 180 and 195° at midstance. During the European Cup, walking speed decreased significantly (F=9.35,P=0.002), mostly due to a decrease in step length between 38.5 and 48.5 km (t=8.59,P=0.014). From this study, it would appear that the key areas a 50 km race walker must develop and coordinate are step length and cadence, although it is also important to ensure legal walking technique is maintained with the onset of fatigue. PMID:23679143

  2. Saqqar: A 34 km diameter impact structure in Saudi Arabia

    NASA Astrophysics Data System (ADS)

    Kenkmann, Thomas; Afifi, Abdulkader M.; Stewart, Simon A.; Poelchau, Michael H.; Cook, Douglas J.; Neville, Allen S.

    2015-11-01

    Here we present the first proof of an impact origin for the Saqqar circular structure in northwestern Saudi Arabia (Neville et al. ), with an apparent diameter of 34 km, centered at 29°35'N, 38°42'E. The structure is formed in Cambrian-Devonian siliciclastics and is unconformably overlain by undeformed Cretaceous and Paleogene sediments. The age of impact is not well constrained and lies somewhere between 410 and 70 Ma. The subsurface structure is constrained by 2-D reflection seismic profiles and six drilled wells. First-order structural features are a central uplift that rises approximately 2 km above regional datums, surrounded by a ring syncline. The crater rim is defined by circumferential normal faults. The central uplift and ring syncline correspond to a Bouguer gravity high and an annular ring-like low, respectively. The wells were drilled within the central uplift, the deepest among them exceed 2 km depth. Sandstone core samples from these wells show abundant indicators of a shock metamorphic overprint. Planar deformation features (PDFs) were measured with orientations along (0001), {101¯3}, and less frequently along {101¯1} and {101¯4}. Planar fractures (PFs) predominantly occur along (0001) and {101¯1}, and are locally associated with feather features (FFs). In addition, some shocked feldspar grains and strongly deformed mica flakes were found. The recorded shock pressure ranges between 5 and 15 GPa. The preserved level of shock and the absence of an allochthonous crater fill suggest that Saqqar was eroded by 1-2 km between the Devonian and Maastrichtian. The documentation of unequivocal shock features proves the formation of the Saqqar structure by a hypervelocity impact event.

  3. Towards Mapping the Ocean Surface Topography at 1 KM Resolution

    NASA Astrophysics Data System (ADS)

    Fu, L. L.; Rodriguez, E.

    2006-07-01

    We propose to apply the technique of synthetic aperture radar interferometry to the measurement of ocean surface topography at spatial resolu tion approaching 1 km . The measurement w ill have wide ranging applications in oceanography , hydrology , and marine geophysics. The oceanographic and related societal applications are briefly discussed in the paper. To meet the requirements for oceanographic application s, the in strument must be flown in an orbit w ith proper samp ling of ocean tides.

  4. Towards Mapping the Ocean Surface Topography at 1 km Resolution

    NASA Technical Reports Server (NTRS)

    Fu, Lee-Lueng; Rodriquez, Ernesto

    2006-01-01

    We propose to apply the technique of synthetic aperture radar interferometry to the measurement of ocean surface topography at spatial resolution approaching 1 km. The measurement will have wide ranging applications in oceanography, hydrology, and marine geophysics. The oceanographic and related societal applications are briefly discussed in the paper. To meet the requirements for oceanographic applications, the instrument must be flown in an orbit with proper sampling of ocean tides.

  5. Calcium accumulation during sporulation of Bacillus megaterium KM.

    PubMed Central

    Hogarth, C; Ellar, D J

    1978-01-01

    Accumulation of Ca2+ in Bacilli occurs during stages IV to VI of sporulation. Ca2+ uptake into the sporangium was investigated in Bacillus megaterium KM in protoplasts prepared in stage III of sporulation and cultured to continue sporulation. These protoplasts and whole cells exhibit essentially identical Ca2+ uptake, which is compared with that of forespores isolated in stage V of sporulation. Ca2+, uptake into both sporangial protoplasts and isolated forespores occurs by Ca2+-specific carrier-mediated processes. However, protoplasts exhibit a Km value of 31 micrometer, and forespores have a Km value of 2.1 mM. Sporangial protoplasts accumulate Ca2+ against a concentration gradient. In contrast, Ca2+ uptake into isolated forespores is consistent with downhill transfer in which both rate and extent of uptake are affected by the external Ca2+ concontration. Dipicolinic acid has no effect on Ca2+ uptake by isolated forespores, apart from decreasing the external Ca2+ concentration by chelation. A model for sporulation-specific Ca2+ accumulation is proposed, in which Ca2+ is transported into the sporangium, resulting in a concentration of 3--9 mM in the mother-cell cytoplasm. This high concentration of Ca2+ enables carrier-mediated transfer down a concentration gradient into the forespore compartment, where a low free Ca2+ concentration is maintained by complexing with dipicolinic acid. PMID:103543

  6. Observations of magnetoconvection in Sunspots with 100 km resolution

    NASA Astrophysics Data System (ADS)

    Berger, T. E.; Löfdahl, M. G.; Scharmer, G.; Title, A. M.

    2003-05-01

    We present new observations from the Swedish 1-meter Solar Telescope (SST) on La Palma with ˜0.1 arcsecond ( ˜100 km) resolution: the highest resolution yet achieved in solar observations. We focus on sunspot and active region magnetoconvective phenomena using G-band 4305 Å, 4877 Å continuum, 7507 Å TiO bandhead, and Ca II 3968 Å H-line filtergram movies. The G-band data are post-processed using Joint Phase Diverse Speckle wavefront restoration to create a full diffraction limited time series. Sunspot light-bridges are shown to have dark lanes less than 300 km in width that are coherent along the entire length of the bridge. Similarly, we find elongated dark ``canals'' in plage regions, particularly near pores, that appear to be highly modified intergranular downflow lanes. The canals are less than 200 km in width and are much more coherent than intergranular lanes in non-magnetic regions, often retaining their basic structure for more than one granular turn-over time. Both the light-bridge central lane and the canals appear to be the result of highly constrained flow structure in strong magnetic field regions -- an aspect of solar magnetoconvection that has not previously been observed. This reseach was supported by funding from the Royal Swedish Academy of Sciences, a SOHO Guest Investigator subcontract to California State University Northridge, and the NASA TRACE contract NAS5-38099 at Lockheed Martin.

  7. Acceleration of barium ions near 8000 km above an aurora

    NASA Technical Reports Server (NTRS)

    Stenbaek-Nielsen, H. C.; Hallinan, T. J.; Wescott, E. M.; Foeppl, H.

    1984-01-01

    A barium shaped charge, named Limerick, was released from a rocket launched from Poker Flat Research Range, Alaska, on March 30, 1982, at 1033 UT. The release took place in a small auroral breakup. The jet of ionized barium reached an altitude of 8100 km 14.5 min after release, indicating that there were no parallel electric fields below this altitude. At 8100 km the jet appeared to stop. Analysis shows that the barium at this altitude was effectively removed from the tip. It is concluded that the barium was actually accelerated upward, resulting in a large decrease in the line-of-sight density and hence the optical intensity. The parallel electric potential in the acceleration region must have been greater than 1 kV over an altitude interval of less than 200 km. The acceleration region, although presumably auroral in origin, did not seem to be related to individual auroral structures, but appeared to be a large-scale horizontal structure. The perpendicular electric field below, as deduced from the drift of the barium, was temporally and spatially very uniform and showed no variation related to individual auroral structures passing through.

  8. Mesoscale (50-km) Boundary Layer Eddies in CASES-97

    NASA Astrophysics Data System (ADS)

    LeMone, M. A.; Grossman, R. L.; Yates, D.; Chen, F.; Ikeda, K.

    2001-05-01

    Boundery-layer eddies 50 km across are documented for the morning of 10 May 1997 during the Cooperative Atmosphere Surface Exchange Study (CASES-97). CASES-97 was held from 21 April to 21 May 1997, in the lower Walnut River Watershed in south central Kansas, to study the role of the heterogeneous surface in boundary-layer evolution. The eddies appear to be tied to terrain, with warm, upwelling air over the relatively high terrain that forms the eastern edge of the watershed, and downwelling air over the watershed. The winds on this day were 5 m/s out of the south, and there were strong horizontal contrasts in vegetation and surface fluxes, suggesting that surfact fluxes could also play a role. For comparison, we examine two other days for the presence of mesoscale eddies, 29 April (characterized by high horizontal heterogeneity of vegetation and 10 m/s southerlies), and 20 May (characterized by a uniformly green and moist surface with winds ENE at 7 m/s). 29 April had significant but rapidly-changing horizontal variability at scales greater than 10 km, but variability on 20 May was on scales less than 5 km. Estimates of the sensible heat budgets for the three days revealed a large residual for 10 May, the day with the mesoscale eddies. Calculation of the expected errors and reasonable corrections for bias errors and radiative heating did not account for the residual, leading to the hypothesis that the residual is associated with the mesoscale eddies.

  9. Inhibition of dual-specificity phosphatase 26 by ethyl-3,4-dephostatin: Ethyl-3,4-dephostatin as a multiphosphatase inhibitor.

    PubMed

    Seo, Huiyun; Cho, Sayeon

    2016-04-01

    Protein tyrosine phosphatases (PTPs) regulate protein function by dephosphorylating phosphorylated proteins in many signaling cascades and some of them have been targets for drug development against many human diseases. There have been many reports that some chemical inhibitors could regulate particular phosphatases. However, there was no extensive study on specificity of inhibitors towardss phosphatases. We investigated the effects of ethyl-3,4-dephostatin, a potent inhibitor of five PTPs including PTP-1B and Src homology-2-containing protein tyrosine phosphatase-1 (SHP-1), on thirteen other PTPs using in vitro phosphatase assays. Of them, dual-specificity protein phosphatase 26 (DUSP26), which inhibits mitogen-activated protein kinase (MAPK) and p53 tumor suppressor and is known to be overexpressed in anaplastic thyroid carcinoma, was inhibited by ethyl-3,4-dephostatin in a concentration-dependent manner. Kinetic studies with ethyl-3,4-dephostatin and DUSP26 revealed competitive inhibition, suggesting that ethyl-3,4-dephostatin binds to the catalytic site of DUSP26 like other substrate PTPs. Moreover, ethyl-3,4-dephostatin protects DUSP26-mediated dephosphorylation of p38, a member of the MAPK family, and p53. Taken together, these results suggest that ethyl-3,4-dephostatin functions as a multiphosphatase inhibitor and is useful as a therapeutic agent for cancers overexpressing DUSP26. PMID:27209699

  10. Synthesis and antimicrobial activity of some novel fused heterocyclic 1,2,4-triazolo [3,4-b][1,3,4] thiadiazine derivatives

    PubMed Central

    Sahu, Jagdish K.; Ganguly, Swastika; Kaushik, Atul

    2014-01-01

    In the present investigation, the synthesis and antimicrobial evaluation of 1,2,4-triazolo [3,4-b][1,3,4] thiadiazine including different pharmacophores are aimed at. In this study, a series of 6-aryl-3- (3,4 -dialkoxyphenyl)-7H -[1,2,4]triazolo [3,4-b][1,3,4] thiadiazine (7a-7k) was synthesized by condensing 4-amino-5-(3,4-dialkoxyphenyl)-4H-[1,2,4]- triazole-3-thiol (6) with various aromatic carboxylic acids in the presence of phenacyl bromides through one-pot reaction. Eleven fused heterocyclic derivatives were successfully synthesized. The structures of these newly synthesized compounds were characterized by IR, 1H NMR and mass spectroscopic studies. All the synthesized compounds were screened for their antimicrobial evaluation. Some of the compounds exhibited promising antimicrobial activity. From the present study it may be concluded that synthesized compounds are fruitful in terms of their structural novelty and marked biological activities. These compounds could be further modified to develop potential and safer antifungal agents. PMID:24959418

  11. Impact of 3,4-dideoxyglucosone-3-ene (3,4-DGE) on cytotoxicity of acidic heat-sterilized peritoneal dialysis fluid.

    PubMed

    Tomo, Tadashi; Okabe, Eiji; Yamamoto, Takashi; Namoto, Shinji; Iwashita, Tomohiko; Matsuyama, Kazuhiro; Kadota, Jun-ichi

    2007-01-01

    Of the glucose degradation products (GDPs) in glucose-rich peritoneal dialysate, we investigated the influence of 3,4-dideoxyglucosone-3-ene (3,4-DGE) on the cytotoxicity of acidic heat-sterilized peritoneal dialysis fluid (L-H PDF) using human peritoneal mesothelial cells (HPMC). We prepared acidified filtration-sterilized PDF (glucose concentration 3.86%) containing eight types of added GDP [3,4-DGE, glyoxal (GO), methylglyoxal (MGO), 3-deoxyglucosone (3-DG), formaldehyde (FA), acetaldehyde (AA), 5-hydroxymethyl-2-furaldehyde (5-HMF), and furfural (FF)] or seven types of GDP (GO, MGO, 3-DG, FA, AA, 5-HMF, and FF). HPMC were exposed to these two types of solution and acidic heat-sterilized PDF (glucose concentration 3.86%, L-H 3.86) for 4 h. Cell viability was determined by 3,(4,5-dimethythiazol-2-yl)2,5-diphenyl-terazolium bromide (MTT) assay. MTT viability was decreased significantly compared with the control when treated with L-H 3.86 or acidified neutral filtration-sterilized PDF (glucose concentration 3.86%) containing eight GDPs. However, no significant decrease in MTT viability was observed when HPMC were treated with acidified neutral filtration-sterilized PDF (glucose concentration 3.86%) containing seven GDPs. Thus, 3,4-DGE strongly affects the cytotoxicity of L-H PDF. It is suggested that the cytotoxicity of L-H PDF is based on the presence of 3,4-DGE. PMID:17380297

  12. Satellite Observations of Antarctic Sea Ice Thickness and Volume

    NASA Technical Reports Server (NTRS)

    Kurtz, Nathan; Markus, Thorsten

    2012-01-01

    We utilize satellite laser altimetry data from ICESat combined with passive microwave measurements to analyze basin-wide changes in Antarctic sea ice thickness and volume over a 5 year period from 2003-2008. Sea ice thickness exhibits a small negative trend while area increases in the summer and fall balanced losses in thickness leading to small overall volume changes. Using a five year time-series, we show that only small ice thickness changes of less than -0.03 m/yr and volume changes of -266 cu km/yr and 160 cu km/yr occurred for the spring and summer periods, respectively. The calculated thickness and volume trends are small compared to the observational time period and interannual variability which masks the determination of long-term trend or cyclical variability in the sea ice cover. These results are in stark contrast to the much greater observed losses in Arctic sea ice volume and illustrate the different hemispheric changes of the polar sea ice covers in recent years.

  13. Observations of CO dayglow at 4.7 mu, CO mixing ratios, and temperatures at 74 and 105 km on Venus

    NASA Astrophysics Data System (ADS)

    Krasnopolsky, Vladimir

    630 ± 130 ppm. The observed values of CO and temperatures are compared and discussed with those in other observations and models. Numerous CO and CO2 absorption lines in the observed spectra are used to retrieve CO abundances and temperatures at 74 km on Venus. The measured CO mixing ratio is constant at 40 ppm from 50(°) S to 30(°) N with a weak increase to the higher latitudes. Temperature at 74 km is almost constant at 222.6 ± 3.4 K, in perfect agreement with VIRA.

  14. Observations of CO dayglow at 4.7 μm, CO mixing ratios, and temperatures at 74 and 104-111 km on Venus

    NASA Astrophysics Data System (ADS)

    Krasnopolsky, Vladimir A.

    2014-07-01

    of 560 ± 100 ppm. The observed values of CO and temperatures are compared and discussed with those in other observations and models. Numerous CO and CO2 absorption lines in the observed spectra are used to retrieve CO abundances and temperatures at 74 km on Venus. The measured CO mixing ratio is found constant at 40 ppm from 50°S to 30°N with a weak increase to the higher latitudes. The temperature at 74 km is almost constant at 222.6 ± 3.4 K, in perfect agreement with the Venus International Reference Atmosphere (Seiff, A. et al. [1985]. Adv. Space Res. 5, 3-58).

  15. Comparison of orbital chemistry with crustal thickness and lunar sample chemistry

    NASA Technical Reports Server (NTRS)

    Schonfeld, E.

    1977-01-01

    A correlation between orbital chemistry (FeO, Al2O3, Mg/Al, MgO/FeO, Th) and the lunar crustal thickness is examined. The correlation suggests either lack of complete homogenization by lateral or vertical mixing, or lateral variation in the differentiation process. In addition, links between orbital chemistry and lunar sample chemistry are investigated. In regions with crustal thickness between 100 and 110 km, gabbroic anorthosites are very abundant, while in regions with crustal thickness of about 80 km anorthositic gabbros are frequent. Special attention is given to the distribution of low-potassium Fra Mauro basalt, found in high concentrations in regions with 50 to 60 km crustal thickness.

  16. Investigation of neutral endopeptidases (EC 3.4.24.11) and of neutral proteinases (EC 3.4.24.4) using a new sensitive two-stage enzymatic reaction.

    PubMed

    Indig, F E; Ben-Meir, D; Spungin, A; Blumberg, S

    1989-09-25

    A sensitive two-stage enzymatic reaction for mammalian and bacterial metalloendopeptidases has been developed using the substrate 3-carboxypropanoyl-alanyl-alanyl-leucine-4-nitroanilide supplemented with Streptomyces griseus amino-peptidase. Neutral endopeptidase EC 3.4.24.11 from bovine kidney hydrolyzes the substrate (pH 7.5, 25 degrees C) with a catalytic efficiency (kcat = 1.2 x 10(2) s-1, Km = 0.15 mM) of the highest ever reported for the enzyme acting on synthetic chromophoric and fluorogenic substrates. Thermolysin hydrolyzes the substrate at a faster rate (kcat = 1.2 x 10(3) s-1) but the overall efficiency is diminished by a higher Km (4.2 mM). Suspensions of human neutrophil cells and culture filtrates of Bacillus cereus have been assayed sensitively for their neutral endopeptidases and neutral proteinase activities, respectively. The assay provides a convenient tool for the kinetic investigation of neutral endopeptidases and neutral proteinases and for assessing their function in biological systems. PMID:2507355

  17. Measuring Thicknesses of Wastewater Films

    NASA Technical Reports Server (NTRS)

    Schubert, F. H.; Davenport, R. J.

    1987-01-01

    Sensor determines when thickness of film of electrically conductive wastewater on rotating evaporator drum exceeds preset value. Sensor simple electrical probe that makes contact with liquid surface. Made of materials resistant to chemicals in liquid. Mounted on shaft in rotating cylinder, liquid-thickness sensor extends toward cylinder wall so tip almost touches. Sensor body accommodates probe measuring temperature of evaporated water in cylinder.

  18. Thicknesses and Volumes of Lunar Mare Basalt Flow Units

    NASA Astrophysics Data System (ADS)

    Hiesinger, H.; Head, J. W.; Wolf, U.; Jaumann, R.; Neukum, G.

    Reliable estimates of the flow thickness are crucial to our understanding of the vol- umes and the flux of lunar mare basalt volcanism. Previous work on basalt flow unit thicknesses was based on (1) shadow measurements in high-resolution images that were taken under low-sun conditions, (2) in situ observations, e.g. of Hadley Rille at the Apollo 15 landing site, and (3) on studies of the chemical kinetic aspects of lava emplacement and cooling. These studies revealed flow unit thicknesses between 1 and 96 m. Flow unit thicknesses derived from imaging data are on average ~21 m, in contrast to chemical kinetic considerations that yield thicknesses of less than 10 m. We used crater size-distribution measurements to estimate flow unit thicknesses. A large number (~60) of our crater counts show evidence for resurfacing events and these "irregularities" in the crater size distributions are used to infer the thickness of the resurfacing layer, that is the thickness of lava flows in several nearside basins. We find that the average minimum flow unit height of all investigated units is on the order of 34 m (+7/-6 m) and that the average maximum flow unit height is about 53 m (+9/- 9 m). On average the thinnest flow units were detected for units in Mare Insularum, Mare Cognitum, and Mare Nubium, thickest flows are exposed in Mare Tranquilli- tatis and Mare Humorum. Average thicknesses of flow units in Oceanus Procellarum and Mare Imbrium are slightly larger than in Mare Insularum, Mare Cognitum, and Mare Nubium, but are smaller than in Mare Tranquillitatis and Mare Humorum. The minimum average volume of all investigated flow units is~590 km3 and the maximum average volume is~940 km3. Our data indicate that the most voluminous flow units are located in Mare Humorum and Mare Tranquillitatis. As crater counts for units in Mare Serenitatis do not exhibit prominent deflections we conclude that these units have not to been resurfaced with flows thick enough to be detected in the

  19. Comparison of broadband mode arrivals at ranges of 3515 km and 5171 km in the North Pacific

    NASA Astrophysics Data System (ADS)

    Wage, Kathleen E.

    2003-04-01

    The Acoustic Thermometry of Ocean Climate (ATOC) provided an opportunity to observe signals propagating in the low-order modes of the ocean waveguide. Understanding the fluctuations of these mode signals is an important prerequisite to using them for tomography or other applications. In previous work, we characterized the cross-mode coherence and temporal variability of the low-order mode arrivals at 3515 km range [Wage et al., J. Acoust. Soc. Am. (in press)]. This study compares the mode arrivals for two different ranges : 3515 km and 5171 km, using data from the ATOC vertical line arrays at Hawaii and Kiritimati. We discuss the mode intensity and coherence statistics for each of the arrays and examine mean arrival time trends over the year-long deployment. Experimental results are compared to PE simulations of propagation through a realistic background environment perturbed by internal waves of varying strengths. The dependence of mode statistics on the path-dependent changes in the background sound speed and the parameters of the internal wave field is explored. [Work supported by an ONR Ocean Acoustics Young Faculty Award.] a)A. B. Baggeroer, T. G. Birdsall, C. Clark, J. A. Colosi, B. D. Cornuelle, D. Costa, B. D. Dushaw, M. A. Dzieciuch, A. M. G. Forbes, B. M. Howe, D. Menemenlis, J. A. Mercer, K. Metzger, W. H. Munk, R. C. Spindel, P. F. Worcester, and C. Wunsch.

  20. A Revised Thermosphere for the Mars Global Reference Atmospheric Model (Mars-GRAM Version 3.4)

    NASA Technical Reports Server (NTRS)

    Justus, C. G.; Johnson, D. L.; James, B. F.

    1996-01-01

    This report describes the newly-revised model thermosphere for the Mars Global Reference Atmospheric Model (Mars-GRAM, Version 3.4). It also provides descriptions of other changes made to the program since publication of the programmer's guide for Mars-GRAM Version 3.34. The original Mars-GRAM model thermosphere was based on the global-mean model of Stewart. The revised thermosphere is based largely on parameterizations derived from output data from the three-dimensional Mars Thermospheric Global Circulation Model (MTGCM). The new thermospheric model includes revised dependence on the 10.7 cm solar flux for the global means of exospheric temperature, temperature of the base of the thermosphere, and scale height for the thermospheric temperature variations, as well as revised dependence on orbital position for global mean height of the base of the thermosphere. Other features of the new thermospheric model are: (1) realistic variations of temperature and density with latitude and time of day, (2) more realistic wind magnitudes, based on improved estimates of horizontal pressure gradients, and (3) allowance for user-input adjustments to the model values for mean exospheric temperature and for height and temperature at the base of the thermosphere. Other new features of Mars-GRAM 3.4 include: (1) allowance for user-input values of climatic adjustment factors for temperature profiles from the surface to 75 km, and (2) a revised method for computing the sub-solar longitude position in the 'ORBIT' subroutine.

  1. Subduction of European continental crust to 70 km depth imaged in the Western Alps

    NASA Astrophysics Data System (ADS)

    Paul, Anne; Zhao, Liang; Guillot, Stéphane; Solarino, Stefano

    2015-04-01

    amplitude negative-polarity converted phases (generated by downward velocity decreases) beneath the Dora Maira massif and the westernmost Po plain. Records in the Po plain display a strong but intricate converted signal from the Adria Moho between 10 and 35 km depth. We propose that the negative-polarity converted phases are generated by downward decreasing velocity between, from top to bottom, the Ivrea body of mantle origin, a thick wedge of HP/UHP metamorphic rocks and the European lower crust. Our receiver-function section thus displays the classical wedge-shaped image of the Alpine crust, but with the deepest European Moho ever recorded (70-75 km), and clear evidence of continental subduction of the European lower crust beneath the Ivrea mantle body (and possibly Adria mantle) as a negative-polarity converted phase indicative of an inverted Moho. Based on our seismic section, complemented with seismic and gravity modelling and geological arguments, we propose a new crustal-scale cross-section of the Western Alps.

  2. Exhumation of an unusually large, ~3000 km3 coherent block of oceanic crust from >40 km depth

    NASA Astrophysics Data System (ADS)

    Barrow, Wendy; Metcalf, Rodney; Fairhurst, Robert

    2010-05-01

    The Central Metamorphic terrane (CMt) is an unusually large (~3000 km3) coherent block of mid-ocean ridge (MOR) metabasites; the first one of this scale reported with eclogite facies relicts, decompression assemblages, and thermobarometry indicating exhumation of the entire block from >40 km depth. The CMt is exposed in the eastern Klamath Mountains of northern California and is dominantly an amphibolite facies metabasite which represents remnant oceanic crust subducted in a mid-Paleozoic Pacific-type margin. Thermochronology indicates that the CMt was subsequently exhumed along the Trinity fault during an early Permian extensional event. Newly discovered relict textures with new thermobarometry results suggest the CMt metabasites record the retrograde segment of the P-T-deformation-time path during exhumation from hornblende eclogite facies P-T conditions. A decompression and cooling sequence consisting of rutile cores within ilmenite crystals mantled by titanite is observed in CMt amphibolite samples. Zr-in-rutile thermometry combined with experimental data for rutile stability in metabasites suggests that relict rutile crystals preserve early P-T conditions of ~600° C and >1.3 GPa. Transition from eclogite facies is further supported by ilmenite-plagioclase-amphibole symplectites suggesting replacement of garnet or omphacite during decompression. The dominant mineral assemblages and metamorphic fabrics indicate dynamic recrystallization of metabasites during declining P-T conditions through amphibolite - epidote amphibolite facies. Exhumation via extension along the Trinity fault is suggested by the coplanar relationship between metabasite decompression-related deformation fabrics and the Trinity fault. We propose that subducted oceanic crust (CMt) was subsequently exhumed as a large coherent block from depths >40 km. This is significant because the conversion of mafic oceanic crust to eclogite produces the negative buoyancy (relative to mantle peridotite) that

  3. Mapping the global land surface using 1 km AVHRR data

    USGS Publications Warehouse

    Lauer, D.T.; Eidenshink, J.C.

    1998-01-01

    The scientific requirements for mapping the global land surface using 1 km advanced very high resolution radiometer (AVHRR) data have been set forth by the U.S. Global Change Research Program; the International Geosphere Biosphere Programme (IGBP); The United Nations; the National Oceanic and Atmospheric Administration (NOAA); the Committee on Earth Observations Satellites; and the National Aeronautics and Space Administration (NASA) mission to planet Earth (MTPE) program. Mapping the global land surface using 1 km AVHRR data is an international effort to acquire, archive, process, and distribute 1 km AVHRR data to meet the needs of the international science community. A network of AVHRR receiving stations, along with data recorded by NOAA, has been acquiring daily global land coverage since April 1, 1992. A data set of over 70,000 AVHRR images is archived and distributed by the United States Geological Survey (USGS) EROS Data Center, and the European Space Agency. Under the guidance of the IGBP, processing standards have been developed for calibration, atmospheric correction, geometric registration, and the production of global 10-day maximum normalized difference vegetation index (NDVI) composites. The major uses of the composites are for the study of surface vegetation condition, mapping land cover, and deriving biophysical characteristics of terrestrial ecosystems. A time-series of 54 10-day global vegetation index composites for the period of April 1, 1992 through September 1993 has been produced. The production of a time-series of 33 10-day global vegetation index composites using NOAA-14 data for the period of February 1, 1995 through December 31, 1995 is underway. The data products are available from the USGS, in cooperation with NASA's MTPE program and other international organizations.

  4. An evaluation of the global 1-km AVHRR land dataset

    USGS Publications Warehouse

    Teillet, P.M.; El Saleous, N.; Hansen, M.C.; Eidenshink, Jeffery C.; Justice, C.O.; Townshend, J.R.G.

    2000-01-01

    This paper summarizes the steps taken in the generation of the global 1-km AVHRR land dataset, and it documents an evaluation of the data product with respect to the original specifications and its usefulness in research and applications to date. The evaluation addresses data characterization, processing, compositing and handling issues. Examples of the main scientific outputs are presented and options for improved processing are outlined and prioritized. The dataset has made a significant contribution, and a strong recommendation is made for its reprocessing and continuation to produce a long-term record for global change research.

  5. Microorganisms cultured from stratospheric air samples obtained at 41 km.

    PubMed

    Wainwright, M; Wickramasinghe, N C; Narlikar, J V; Rajaratnam, P

    2003-01-21

    Samples of air removed from the stratosphere, at an altitude of 41 km, were previously found to contain viable, but non-cultureable bacteria (cocci and rods). Here, we describe experiments aimed at growing these, together with any other organisms, present in these samples. Two bacteria (Bacillus simplex and Staphylococcus pasteuri) and a single fungus, Engyodontium album (Limber) de Hoog were isolated from the samples. Although the possibility of contamination can never be ruled out when space-derived samples are studied on earth, we are confident that the organisms originated from the stratosphere. Possible mechanisms by which these organisms could have attained such a height are discussed. PMID:12583913

  6. A Proposed International Tropical Reference Atmosphere up to 80 Km

    NASA Technical Reports Server (NTRS)

    Ananthasayanam, M. R.; Narasimha, R.

    1985-01-01

    Based upon previous standard reference atmosphere, which are usually inspired by temperature regions, a proposal is made for an International Tropical Reference Atmosphere (ITRA). It is a modification of the Indian Standard Tropical Atmosphere (ISIA). The data at the available longitudinal stations in the tropics was considered in formulating the present proposal. Balloonsonde, rocketsonde, and grenade and falling sphere data was used in developing the temperature data bse fromt he stratosphere, troposphere and mesosphere. Temperature distribution and mean sea level pressures up to 80 km altitudes is discussed.

  7. PMT characterisation for the KM3NeT project

    NASA Astrophysics Data System (ADS)

    Herold, B.; Kalekin, O.; Reubelt, J.; KM3NeT Consortium

    2011-05-01

    The KM3NeT project aims to design and to construct at least a cubic kilometre scale neutrino telescope in the Mediterranean Sea. The main task is to instrument this deep-sea water volume with optical modules, each housing one or several photomultiplier tubes. Three-, 8- and 10-in. PMTs from ET Enterprises, Hamamatsu and MELZ-FEU have been investigated as candidates for the telescope's optical modules. Various parameters of these photomultiplier tubes have been measured in a test bench at the Erlangen Centre for Astroparticle Physics. These results are presented.

  8. EVLA/NMA: Within and Beyond the 21-km Radius

    NASA Astrophysics Data System (ADS)

    Durand, Steve; Romney, Jonathan D.

    NRAO's Expanded Very Large Array (EVLA) project is being implemented in two phases. Each involves extremely wide- bandwidth data transmission over optical fibers, but the two phases necessarily involve quite different approaches to the required fiber infrastructure, which make for an interesting contrast. Phase 1, formally called the "Ultrasensitive Array", involves replacing almost all of the existing electronics, leaving only the mechanical and track infrastructure of the VLA. The data transmission system being implemented for Phase 1 uses dedicated optical fibers, currently being buried at the VLA site. Twelve standard single-mode fibers will run from each of 72 antenna pads to the central building. One of these fibers will support the wideband data transmission system, using a dense wavelength division multiplexing technique to carry a bandwidth of 96 Gbps (120 Gbps formatted) per antenna. Fibers from the 27 active antenna pads will carry a total bandwidth of 2.6 Tbps. The longest of these fibers will extend the full 21- km length of each arm. Phase 2 will add the "New Mexico Array". Eight new stations will be built, and the electronics of the VLBA Pie Town and Los Alamos stations will be upgraded, to create a medium-resolution array, with sensitivity even higher than Phase 1. All ten NMA stations will lie within the State of New Mexico. The new antennas will range as far as 265 km from the VLA site, and will be located so as to facilitate access to existing fiber trunks installed, primarily, by rural telephone companies. These trunks include numerous unused fibers which, it is anticipated, can be leased economically. The longest fiber run from the VLA is 480 km. The same 96-Gbps total bandwidth per station will be supported, with the same underlying sub-band structure. Signals from up to three NMA stations will be multiplexed onto a single fiber in the existing trunks. This will limit the total length of fiber which must be leased or acquired to about 1240 km.

  9. The 10 km/s, 10 kg railgun

    SciTech Connect

    Marshall, R.A. ); Barber, J.P. )

    1991-01-01

    In this paper the system design for a railgun powered by capacitor-based energy stores distributed along its length is presented. It is assumed that it is required to accelerate a mass of 10kg to a velocity of 10 km/s. Parameters for the railgun and its energy stores are derived and the performance of the system is computed with particular attention being paid to the efficiency with which store energy is converted to launch package kinetic energy. It is shown that efficiencies of 90 percent can be expected from a properly designed system.

  10. The relational database system of KM3NeT

    NASA Astrophysics Data System (ADS)

    Albert, Arnauld; Bozza, Cristiano

    2016-04-01

    The KM3NeT Collaboration is building a new generation of neutrino telescopes in the Mediterranean Sea. For these telescopes, a relational database is designed and implemented for several purposes, such as the centralised management of accounts, the storage of all documentation about components and the status of the detector and information about slow control and calibration data. It also contains information useful during the construction and the data acquisition phases. Highlights in the database schema, storage and management are discussed along with design choices that have impact on performances. In most cases, the database is not accessed directly by applications, but via a custom designed Web application server.

  11. 157km BOTDA with pulse coding and image processing

    NASA Astrophysics Data System (ADS)

    Qian, Xianyang; Wang, Zinan; Wang, Song; Xue, Naitian; Sun, Wei; Zhang, Li; Zhang, Bin; Rao, Yunjiang

    2016-05-01

    A repeater-less Brillouin optical time-domain analyzer (BOTDA) with 157.68km sensing range is demonstrated, using the combination of random fiber laser Raman pumping and low-noise laser-diode-Raman pumping. With optical pulse coding (OPC) and Non Local Means (NLM) image processing, temperature sensing with +/-0.70°C uncertainty and 8m spatial resolution is experimentally demonstrated. The image processing approach has been proved to be compatible with OPC, and it further increases the figure-of-merit (FoM) of the system by 57%.

  12. One-Hundred-km-Scale Basins on Enceladus: Evidence for an Active Ice Shell

    NASA Technical Reports Server (NTRS)

    Schenk, Paul M.; McKinnon, William B.

    2009-01-01

    Stereo-derived topographic mapping of 50% of Enceladus reveals at least 6 large-scale, ovoid depressions (basins) 90-175 km across and 800-to-1500 m deep and uncorrelated with geologic boundaries. Their shape and scale are inconsistent with impact, geoid deflection, or with dynamically supported topography. Isostatic thinning of Enceladus ice shell associated with upwellings (and tidally-driven ice melting) can plausibly account for the basins. Thinning implies upwarping of the base of the shell of 10-20 km beneath the depressions, depending on total shell thickness; loss of near-surface porosity due to enhanced heat flow may also contribute to basin lows. Alternatively, the basins may overly cold, inactive, and hence denser ice, but thermal isostasy alone requires thermal expansion more consistent with clathrate hydrate than water ice. In contrast to the basins, the south polar depression (SPD) is larger (350 wide) and shallower (0.4-to-0.8 km deep) and correlates with the area of tectonic deformation and active resurfacing. The SPD also differs in that the floor is relatively flat (i.e., conforms roughly to the global triaxial shape, or geoid) with broad, gently sloping flanks. The relative flatness across the SPD suggests that it is in or near isostatic equilibrium, and underlain by denser material, supporting the polar sea hypothesis of Collins and Goodman. Near flatness is also predicted by a crustal spreading origin for the "tiger stripes (McKinnon and Barr 2007, Barr 2008); the extraordinary, high CIRS heat flows imply half-spreading rates in excess of 10 cm/yr, a very young surface age (250,000 yr), and a rather thin lithosphere (hence modest thermal topography). Topographic rises in places along the outer margin of the SPD correlate with parallel ridges and deformation along the edge of the resurfaced terrain, consistent with a compressional, imbricate thrust origin for these ridges, driven by the spreading.

  13. Wall thickness design and corrosion management

    SciTech Connect

    Gestel, W.M. van; Guijt, J.

    1994-12-31

    In 1995, Norske Shell will install two 36-in. sweet wet gas pipe lines in the Norwegian sector of the North Sea. The lines cross the Norwegian trench with water depths up to 350 meter. For the last 3.5 km. of the route the pipelines will be laid in a tunnel which will be flooded after construction. The two lines will transport largely untreated well fluids from the Troll field to an onshore processing plant at Kollsness, North of Bergen. From there sales gas will be transported to the continent via the Furopipe and Zeepipe systems. Gas contracts covering 30 years have been concluded with gas utilities on the continent. The maximum wall thickness that could be installed was limited by the capabilities of the present generation of lay barges and pipe mill capacities. The over-thickness, i.e. beyond that what is required for pressure containment and external collapse, is available as corrosion allowance. The paper discusses a novel probabilistic approach to define the corrosion control measures. The corrosion control system is based on the injection of glycol for corrosion mitigation and inspection by ultrasonic internal smart pigs, which in combination with identified fall back options, ensure a minimum 50 year service life.

  14. How thick are lunar mare basalts

    NASA Technical Reports Server (NTRS)

    Hoerz, F.

    1978-01-01

    It is argued that De Hon's estimates of the thickness of lunar mare basalts, made by analyzing 'ghost' craters on mare surfaces, were inflated as the result of the crater morphometric data of Pike (1977) to reconstruct rim heights of degraded craters. Crater rim heights of 82 randomly selected highland craters of various states of degradation were determined, and median rim height was compared to that of corresponding fresh impact structures. Results indicate that the thickness estimates of De Hon may be reduced by a factor of 2, and that the total volume of mare basalt produced throughout lunar history could be as little as 1-2 million cubic kilometers. A survey of geochemical and petrographic evidence indicates that lateral transport of regolith components over distances of much greater than 10 km is relatively inefficient; it is suggested that vertical mixing of a highland substrate underlying the basaltic fill may have had a primordial role in generating the observed mare width distributions and high concentrations of exotic components in intrabasin regoliths.

  15. Ineffectiveness of 3,4-diaminopyridine as a therapy for type C botulism.

    USGS Publications Warehouse

    Siegel, L.S.; Price, J.I.

    1987-01-01

    Clostridium botulinum neurotoxins inhibit acetylcholine release at neuromuscular junctions. Agents stimulating neurotransmitter efflux, such as 3,4-diaminopyridine (3,4-DAP), could be useful for botulism therapy. Treatment with 3,4-DAP (8 mg/kg hourly, beginning 3 hr after toxin injection) failed to increase the survival times of mice receiving 10, 20 or 40 LD50 type C, but did prolong the survival of those receiving 20 LD50 type A. This difference in 3,4-DAP efficacy may reflect variations in the molecular mechanism of action of types A and C botulinum neurotoxins.

  16. Analysis of sex differences in open-water ultra-distance swimming performances in the FINA World Cup races in 5 km, 10 km and 25 km from 2000 to 2012

    PubMed Central

    2014-01-01

    Background The present study investigated the changes in swimming speeds and sex differences for elite male and female swimmers competing in 5 km, 10 km and 25 km open-water FINA World Cup races held between 2000 and 2012. Methods The changes in swimming speeds and sex differences across years were analysed using linear, non-linear, and multi-level regression analyses for the annual fastest and the annual ten fastest competitors. Results For the annual fastest, swimming speed remained stable for men and women in 5 km (5.50 ± 0.21 and 5.08 ± 0.19 km/h, respectively), in 10 km (5.38 ± 0.21 and 5.05 ± 0.26 km/h, respectively) and in 25 km (5.03 ± 0.32 and 4.58 ± 0.27 km/h, respectively). In the annual ten fastest, swimming speed remained constant in 5 km in women (5.02 ± 0.19 km/h) but decreased significantly and linearly in men from 5.42 ± 0.03 km/h to 5.39 ± 0.02 km/h. In 10 km, swimming speed increased significantly and linearly in women from 4.75 ± 0.01 km/h to 5.74 ± 0.01 km/h but remained stable in men at 5.36 ± 0.21 km/h. In 25 km, swimming speed decreased significantly and linearly in women from 4.60 ± 0.06 km/h to 4.44 ± 0.08 km/h but remained unchanged at 4.93 ± 0.34 km/h in men. For the annual fastest, the sex difference in swimming speed remained unchanged in 5 km (7.6 ± 3.0%), 10 km (6.1 ± 2.5%) and 25 km (9.0 ± 3.7%). For the annual ten fastest, the sex difference remained stable in 5 km at 7.6 ± 0.6%, decreased significantly and linearly in 10 km from 7.7 ± 0.7% to 1.2 ± 0.3% and increased significantly and linearly from 4.7 ± 1.4% to 9.6 ± 1.5% in 25 km. Conclusions To summarize, elite female open-water ultra-distance swimmers improved in 10 km but impaired in 25 km leading to a linear decrease in sex difference in 10 km and a linear increase in sex difference in 25 km. The linear changes in sex differences

  17. Near-Cloud Aerosol Properties from the 1 Km Resolution MODIS Ocean Product

    NASA Technical Reports Server (NTRS)

    Varnai, Tamas; Marshak, Alexander

    2014-01-01

    This study examines aerosol properties in the vicinity of clouds by analyzing high-resolution atmospheric correction parameters provided in the MODIS (Moderate Resolution Imaging Spectroradiometer) ocean color product. The study analyzes data from a 2 week long period of September in 10 years, covering a large area in the northeast Atlantic Ocean. The results indicate that on the one hand, the Quality Assessment (QA) flags of the ocean color product successfully eliminate cloud-related uncertainties in ocean parameters such as chlorophyll content, but on the other hand, using the flags introduces a sampling bias in atmospheric products such as aerosol optical thickness (AOT) and Angstrom exponent. Therefore, researchers need to select QA flags by balancing the risks of increased retrieval uncertainties and sampling biases. Using an optimal set of QA flags, the results reveal substantial increases in optical thickness near clouds-on average the increase is 50% for the roughly half of pixels within 5 km from clouds and is accompanied by a roughly matching increase in particle size. Theoretical simulations show that the 50% increase in 550nm AOT changes instantaneous direct aerosol radiative forcing by up to 8W/m2 and that the radiative impact is significantly larger if observed near-cloud changes are attributed to aerosol particles as opposed to undetected cloud particles. These results underline that accounting for near-cloud areas and understanding the causes of near-cloud particle changes are critical for accurate calculations of direct aerosol radiative forcing.

  18. How to evacuate 10 km3 of mud: saturate with gas and decrease the pressure!

    NASA Astrophysics Data System (ADS)

    Imbert, Patrice; Geiss, Bernard; Fatjó de Martín, Núria

    2014-06-01

    The crest of the Absheron anticline in the South Caspian Basin at a few hundred meters below the present seafloor shows a subcircular depression about 8 km in diameter and 200 m deep, bounded by steep edges dipping 15° to 45° into it. The depression and the surrounding series are respectively filled and overlain by a regional mass-transport deposit (MTD) 150 m thick outside the depression and 300 m thick inside, composed mostly of extensional blocks. Geometric and stratigraphic analyses indicate that 150 m of initially deposited sediment were removed from a closed area after burial. Seismic evidence of shallow gas accumulations below the crater-like feature suggests that gas likely played a significant role in its development. The model proposed for the emplacement of the crater is that the gas-bearing cover of a shallow gas reservoir underwent exsolution when its overburden thinned during an episode of extensional slope failure. This resulted in loss of resistance to shear and evacuation of the gas-bearing sediment, likely at the shearing base of the failed mass. This evacuation feature is considered an example where the presence of gas locally governs the morphology of an MTD. The interpreted process shows a positive feedback between slope failure and loss of strength at the base of the resulting MTD.

  19. Infrared emission from the atmosphere above 200 km

    NASA Technical Reports Server (NTRS)

    Simpson, J. P.

    1976-01-01

    The infrared radiation over the range from 4 to 1000 microns from atoms and molecules in the earth's atmosphere, between 200 and 400 km, was calculated. Only zenith lines of sight were considered. The excitation of the atoms and molecules is due to collisions with other molecules and to absorption of radiation from the earth and sun. In some cases, the abundances of the molecules had to be estimated. The most important lines are the forbidden lines from atomic oxygen at 63.1 and 147 micron, and the vibration-rotation band of nitric oxide at 5.3 micron. These lines can have intensities as high as a few times 0.001 ergs/sq cm/sec/steradian at 200 km altitude. In addition, the vibration-rotation bands of NO(+) at 4.3 micron and CO at 4.7 micron and the pure rotation lines of NO and NO(+) could be detected by infrared telescopes in space.

  20. Km typing with PCR: application to population screening.

    PubMed Central

    Kurth, J H; Bowcock, A M; Erlich, H A; Nevo, S; Cavalli-Sforza, L L

    1991-01-01

    The immunoglobulin kappa light chain (IgK) locus may play a significant role in the pathology of both infectious and autoimmune diseases. Most of the work on IgK genetics has been conducted using immunological techniques for allelic typing and sequence analysis. This is restricted by availability of reagents and can be both expensive and time-consuming. PCR primers were designed to amplify the kappa constant gene (Ck), and four allele-specific oligonucleotides (ASOs) were used to distinguish the alleles in the amplified PCR products. Direct sequencing of PCR products was performed to confirm that the primers specifically amplified the Ck region and the ASOs differentiated the Km alleles. Sequencing of an average of 209 nucleotides of DNA from 50 individuals revealed no variation except at codon 191, which is known to be involved in a frequent polymorphism. An analysis of 347 different individual DNAs from 10 human populations was conducted to determine Km allelic frequencies within these populations and to apply this type of data collection to population studies. Images Figure 4 Figure 5 PMID:1900145

  1. KM3NeT/ORCA status and plans

    NASA Astrophysics Data System (ADS)

    Samtleben, Dorothea F. E.

    2016-04-01

    Neutrinos created in interactions of cosmic rays with the atmosphere can serve as a powerful tool to unveil the neutrino mass hierarchy (NMH). At low energies, around a few GeV, matter effects from the transition through the Earth are expected to imprint a distinct but also subtle signature on the oscillation pattern, specific to the ordering of the neutrino masses. KM3NeT/ORCA (Oscillations Research with Cosmics in the Abyss), a densely instrumented building block of the upcoming KM3NeT neutrino telescope, will be designated to measuring this signature in the Mediterranean Sea. Using detailed simulations the sensitivity towards this signature has been evaluated. The multi-PMT detectors allow in the water for an accurate reconstruction of GeV neutrino event signatures and distinction of neutrino flavours. For the determination of the mass hierarchy a median significance of 2-6σ has been estimated for three years of data taking, depending on the actual hierarchy and the oscillation parameters. At the same time the values of several oscillation parameters like θ23 will be determined to unprecedented precision.

  2. Quantum crytography over 14km of installed optical fiber

    SciTech Connect

    Hughes, R.J.; Luther, G.G.; Morgan, G.L.; Simmons, C.

    1995-09-01

    We have made the first demonstration that low error rate quantum cryptography over long distances (14km) of installed optical fiber in a real-world environment, subject to uncontrolled temperature and mechanical influences, representing an important new step towards incorporation of quantum cryptography into existing information security systems. We also point out that the high visibility single-photon interference in our experiment allows us to infer a test of the superposition principle of quantum mechanics: a photon reaching the detector has traveled over 14km of optical fiber in a wavepacket comprising a coherent superposition of two components that are spatially separated by about 2m. In principle, there are decoherence processes (or even possible modifications of quantum mechanics) that could cause the photon`s wavefunction to collapse into one component or the other during propagation, leading to a reduction in visibility. However, our results are consistent with no such loss of quantum coherence during the 67-{mu}s propagation time.

  3. Shape from equal thickness contours

    SciTech Connect

    Cong, G.; Parvin, B.

    1998-05-10

    A unique imaging modality based on Equal Thickness Contours (ETC) has introduced a new opportunity for 3D shape reconstruction from multiple views. We present a computational framework for representing each view of an object in terms of its object thickness, and then integrating these representations into a 3D surface by algebraic reconstruction. The object thickness is inferred by grouping curve segments that correspond to points of second derivative maxima. At each step of the process, we use some form of regularization to ensure closeness to the original features, as well as neighborhood continuity. We apply our approach to images of a sub-micron crystal structure obtained through a holographic process.

  4. Laser detection of material thickness

    DOEpatents

    Early, James W.

    2002-01-01

    There is provided a method for measuring material thickness comprising: (a) contacting a surface of a material to be measured with a high intensity short duration laser pulse at a light wavelength which heats the area of contact with the material, thereby creating an acoustical pulse within the material: (b) timing the intervals between deflections in the contacted surface caused by the reverberation of acoustical pulses between the contacted surface and the opposite surface of the material: and (c) determining the thickness of the material by calculating the proportion of the thickness of the material to the measured time intervals between deflections of the contacted surface.

  5. Through thick and thin: Structure of the Galactic thick disc from extragalactic surveys

    NASA Astrophysics Data System (ADS)

    Kordopatis, G.; Hill, V.; Irwin, M.; Gilmore, G.; Wyse, R. F. G.; Tolstoy, E.; de Laverny, P.; Recio-Blanco, A.; Battaglia, G.; Starkenburg, E.

    2013-07-01

    . This population was earlier detected, but our more detailed analysis provides robust estimates of its location (|Z| < 1 kpc), metallicity (-2 < [M/H] < -1 dex) and azimuthal orbital velocity (Vφ ~ 120 km s-1). Conclusions: Given the chemo-dynamical properties of the over-density towards the Carina line-of-sight, we suggest that it represents the metal-poor tail of the canonical thick disc. In spite of the small number of stars available, we suggest that this metal-weak thick disc follows the often suggested canonical thick disc velocity-metallicity correlation of ∂Vφ/∂ [M/H] ~ 40-50 km s-1 dex-1. Based on observations collected at the European Southern Observatory at Paranal, Chile, ESO Large Programme 171.B-0588 (DART) and 171.B-0520(A).Full Tables 2 and 4 are only available at the CDS via anonymous ftp to http://cdsarc.u-strasbg.fr (ftp://130.79.128.5) or via http://cdsarc.u-strasbg.fr/viz-bin/qcat?J/A+A/555/A12

  6. Biological and Electrophysiologic Effects of Poly(3,4-ethylenedioxythiophene) on Regenerating Peripheral Nerve Fibers

    PubMed Central

    Baghmanli, Ziya; Sugg, Kristoffer B.; Wei, Benjamin; Shim, Bong S.; Martin, David C.; Cederna, Paul S.; Urbanchek, Melanie G.

    2014-01-01

    Background Uninjured peripheral nerves in upper-limb amputees represent attractive sites for connectivity with neuroprostheses because their predictable internal topography allows for precise sorting of motor and sensory signals. The inclusion of poly(3,4-ethylenedioxythiophene) reduces impedance and improves charge transfer at the biotic-abiotic interface. This study evaluates the in vivo performance of poly(3,4-ethylenedioxythiophene)–coated interpositional decellularized nerve grafts across a critical nerve conduction gap, and examines the long-term effects of two different poly(3,4-ethylenedioxythiophene) formulations on regenerating peripheral nerve fibers. Methods In 48 rats, a 15-mm gap in the common peroneal nerve was repaired using a nerve graft of equivalent length, including (1) decellularized nerve chemically polymerized with poly(3,4-ethylenedioxythiophene) (dry); (2) decellularized nerve electrochemically polymerized with poly(3,4-ethylenedioxythiophene) (wet); (3) intact nerve; (4) autogenous nerve graft; (5) decellularized nerve alone; and (6) unrepaired nerve gap controls. All groups underwent electrophysiologic characterization at 3 months, and nerves were harvested for histomorphometric analysis. Results Conduction velocity was significantly faster in the dry poly(3,4-ethylenedioxythiophene) group compared with the sham, decellularized nerve, and wet poly(3,4-ethylenedioxythiophene) groups. Maximum specific force for the dry poly(3,4-ethylenedioxythiophene) group was more similar to sham than were decellularized nerve controls. Evident neural regeneration was demonstrated in both dry and wet poly(3,4-ethylenedioxythiophene) groups by the presence of normal regenerating axons on histologic cross-section. Conclusions Both poly(3,4-ethylenedioxythiophene) formulations were compatible with peripheral nerve regeneration at 3 months. This study supports poly(3,4-ethylenedioxythiophene) as a promising adjunct for peripheral nerve interfaces for

  7. 3,4-DGE is cytotoxic and decreases HSP27/HSPB1 in podocytes.

    PubMed

    Sanchez-Niño, Maria Dolores; Poveda, Jonay; Sanz, Ana Belen; Carrasco, Susana; Ruiz-Ortega, Marta; Selgas, Rafael; Egido, Jesus; Ortiz, Alberto

    2014-03-01

    Hyperglycemia is the key driver of diabetic complications and increased concentrations of glucose degradation products. The study of peritoneal dialysis solution biocompatibility has highlighted the adverse biological effects of glucose degradation products. Recently, 3,4-dideoxyglucosone-3-ene (3,4-DGE) was identified as the most toxic glucose degradation product in peritoneal dialysis fluids. In addition, 3,4-DGE is present in high-fructose corn syrup, and its precursor 3-deoxyglucosone is increased in diabetes. The role of 3,4-DGE in glomerular injury had not been addressed. We studied the effects of 3,4-DGE on cultured human podocytes and in vivo in mice. 3,4-DGE induced apoptosis in podocytes in a dose- and time-dependent manner. 3,4-DGE promoted the release of cytochrome c from mitochondria and activation of caspase-3. While high glucose concentrations increased the levels of the podocyte intracellular antiapoptotic protein HSP27/HSPB1, 3,4-DGE decreased the expression of podocyte HSP27/HSPB1. Apoptosis induced by 3,4-DGE was caspase-dependent and could be prevented by the broad-spectrum caspase inhibitor zVAD-fmk. Antagonism of Bax by a Ku-70-derived peptide also prevented apoptosis. Intravenous administration of 3,4-DGE to healthy mice resulted in a decreased expression of HSP27/HSPB1 and caspase-3 activation in whole kidney and in podocytes in vivo. In conclusion, 3,4-DGE induces apoptotic cell death in cultured human podocytes, suggesting a potential role in glomerular injury resulting from metabolic disorders. PMID:24337777

  8. Cratering and penetration experiments in Teflon targets at velocities from 1 to 7 km/s

    NASA Technical Reports Server (NTRS)

    Hoerz, Friedrich; Bernhard, Ronald P.; Cintala, Mark J.; See, Thomas H.

    1995-01-01

    Approximately 20 sq m of protective thermal blankets, largely composed of Teflon, were retrieved from the Long Duration Exposure Facility (LDEF) after the spacecraft had spent approximately 5.7 years in space. Examination of these blankets revealed that they contained thousands of hypervelocity impact features ranging from micron-sized craters to penetration holes several millimeters in diameter. We conducted impact experiments in an effort to reproduce such features and to -- hopefully -- understand the relationships between projectile size and the resulting crater or penetration-hole diameter over a wide range of impact velocity. Such relationships are needed to derive the size- and mass-frequency distribution and flux of natural and man-made particles in low-Earth orbit. Powder propellant and light-gas guns were used to launch soda-lime glass spheres of 3.175 mm (1/8 inch) nominal diameter (Dp) into pure Teflon FEP targets at velocities ranging from 1 to 7 km/s. Target thickness (T) was varied over more than three orders of magnitude from infinite halfspace targets (Dp/T less than 0.1) to very thin films (Dp/T greater than 100). Cratering and penetration of massive Teflon targets is dominated by brittle failure and the development of extensive spall zones at the target's front and, if penetrated, the target's rear side. Mass removal by spallation at the back side of Teflon targets may be so severe that the absolute penetration-hole diameter (Dh) can become larger than that of a standard crater (Dc) at relative target thicknesses of Dp/T = 0.6-0.9. The crater diameter is infinite halfspace Teflon targets increases -- at otherwise constant impact conditions -- with encounter velocity by a factor of V0.44. In contrast, the penetration-hole size is very thin foils (Dp/T greater than 50) is essentially unaffected by impact velocity. Penetrations at target thicknesses intermediate to these extremes will scale with variable exponents of V. Our experimental matrix is

  9. Practical and Efficient Synthesis of α-Aminophosphonic Acids Containing 1,2,3,4-Tetrahydroquinoline or 1,2,3,4-Tetrahydroisoquinoline Heterocycles.

    PubMed

    Ordóñez, Mario; Arizpe, Alicia; Sayago, Fracisco J; Jiménez, Ana I; Cativiela, Carlos

    2016-01-01

    We report here a practical and efficient synthesis of α-aminophosphonic acid incorporated into 1,2,3,4-tetrahydroquinoline and 1,2,3,4-tetrahydroisoquinoline heterocycles, which could be considered to be conformationally constrained analogues of pipecolic acid. The principal contribution of this synthesis is the introduction of the phosphonate group in the N-acyliminium ion intermediates, obtained from activation of the quinoline and isoquinoline heterocycles or from the appropriate δ-lactam with benzyl chloroformate. Finally, the hydrolysis of phosphonate moiety with simultaneous cleavage of the carbamate afforded the target compounds. PMID:27589713

  10. Hybrid fine scale climatology and microphysics of in-cloud icing: From 32 km reanalysis to 5 km mesoscale modeling

    NASA Astrophysics Data System (ADS)

    Lamraoui, Fayçal; Benoit, Robert; Perron, Jean; Fortin, Guy; Masson, Christian

    2015-03-01

    In-cloud icing can impose safety concerns and economic challenges for various industries. Icing climate representations proved beneficial for optimal designs and careful planning. The current study investigates in-cloud icing, its related cloud microphysics and introduces a 15-year time period climatology of icing events. The model was initially driven by reanalysis data from North American Regional Reanalysis and downscaled through a two-level nesting of 10 km and 5 km, using a limited-area version of the Global Environment Multiscale Model of the Canadian Meteorological Center. In addition, a hybrid approach is used to reduce time consuming calculations. The simulation realized exclusively on significant icing days, was combined with non-significant icing days as represented by data from NARR. A proof of concept is presented here for a 1000 km area around Gaspé during January for those 15 years. An increase in the number and intensity of icing events has been identified during the last 15 years. From GEM-LAM simulations and within the atmospheric layer between 10 m and 200 m AGL, supercooled liquid water contents indicated a maximum of 0.4 g m- 3, and 50% of the values are less than 0.05 g m- 3. All values of median volume diameters (MVD) are approximately capped by 70 μm and the typical values are around 15 μm. Supercooled Large Droplets represent approximately 5%. The vertical profile of icing climatology demonstrates a steady duration of icing events until the level of 60 m. The altitudes of 60 m and 100 m indicate substantial icing intensification toward higher elevations. GEM-LAM demonstrated a substantial improvement in the calculation of in-cloud icing, reducing significantly the challenge posed by complex terrains.

  11. An Instrument Suite for the Vertical Characterization of the Ionosphere-Thermosphere System from 100 km to 700km Altitude.

    NASA Astrophysics Data System (ADS)

    Herrero, F.; Nicholas, A.

    2008-05-01

    We describe an instrument suite that includes WTS (the Wind-Temperature Spectrometer developed for the ANDE mission of the Naval Research Laboratory), a new Ion-Drift-Temperature Spectrometer (IDTS) and one each of our new Neutral (NMS) and Ion (IMS) Mass Spectrometers. The WTS and IDTS both implement Small- Deflection Energy Analyzers (SDEAs) developed at NASA Goddard; thus, they are capable of measuring the differential energy and angular distributions of neutrals and ions with the capability of detecting and characterizing non-Maxwellian ion and neutral distributions in the upper atmosphere. The mass spectrometers have a mass resolution of approximately 1/60. The suite is designed for sounding rocket investigations to obtain the vertical distribution of the neutral wind, ion drift, respective temperatures, and relative densities of the major species, e.g., O/N2; in addition it will provide ion and neutral composition, to include metals. The sensitivity of each instrument is sufficient to provide data over altitudes ranging from about 100 to about 700 km. The vertical spatial resolution in the neutral wind/temperature gradually increases from a few meters between 100 and 150 km to 100's of meters above 400 km. The ion drift measurements will have spatial resolution less than 1 m at the peak of the F- region and larger above and below. The wind and ion-drift measurements require large vehicle velocity in the sampled region. We will discuss this and other performance requirements. The capability offered in this instrument suite will make it possible to add new data in our pursuit of two long standing questions: a) the transition from Maxwellian to non-Maxwellian as the thermosphere becomes the exosphere and b) the true O/O2 and O/N2 ratio without instrument contamination due to O recombination in the ion source.

  12. MAPPING THE ASYMMETRIC THICK DISK. II. DISTANCE, SIZE, AND MASS OF THE HERCULES THICK DISK CLOUD

    SciTech Connect

    Larsen, Jeffrey A.; Cabanela, Juan E.; Humphreys, Roberta M. E-mail: cabanela@mnstate.edu

    2011-04-15

    The Hercules Thick Disk Cloud was initially discovered as an excess in the number of faint blue stars between Quadrants 1 and 4 of the Galaxy. The origin of the Cloud could be an interaction with the disk bar, a triaxial Thick Disk, or a merger remnant or stream. To better map the spatial extent of the Cloud along the line of sight, we have obtained multi-color UBVR photometry for 1.2 million stars in 63 fields each of approximately 1 deg{sup 2}. Our analysis of the fields beyond the apparent boundaries of the excess has already ruled out a triaxial Thick Disk as a likely explanation. In this paper, we present our results for the star counts over all of our fields, determine the spatial extent of the overdensity across and along the line of sight, and estimate the size and mass of the Cloud. Using photometric parallaxes, the stars responsible for the excess are between 1 and 6 kpc from the Sun, 0.5-4 kpc above the Galactic plane, and extend approximately 3-4 kpc across our line of sight. The Cloud is thus a major substructure in the Galaxy. The distribution of the excess along our sight lines corresponds with the density contours of the bar in the Disk, and its most distant stars are directly over the bar. We also see through the Cloud to its far side. Over the entire 500 deg{sup 2} of the sky containing the Cloud, we estimate more than 5.6 million stars and 1.9 million solar masses of material. If the overdensity is associated with the bar, it would exceed 1.4 billion stars and more than 50 million solar masses. Finally, we argue that the Hercules-Aquila Cloud is actually the Hercules Thick Disk Cloud.

  13. A 700 km long crustal transect across northern Morocco

    NASA Astrophysics Data System (ADS)

    Carbonell, Ramon; Gallart, Josep; Díaz, Jordi; Gil, Alba; Harnafi, Mimoun; Ouraini, Fadila; Ayarza, Puy; Teixell, Antonio; Arboleya, Maria Luisa; Palomeras, Imma; Levander, Alan

    2013-04-01

    Two controlled-source wide angle seismic reflection experiments have been acquired recently (2010 and 2011) in northern Africa across Morocco. A lithospheric scale transect can be constructed by joining both data sets. Hence, an approximately 700 km-long seismic velocity cross section can be derived. From south-to-north the transect goes from the Sahara Platform, south of Merzouga, to Tanger in the north. The first experiment, SIMA, aimed to constrain the crustal structure across the Atlas Mountains. The Rif, the orogenic belt located just south of the coast of Alboran Sea, was the target of the second experiment, RIFSIS. In both cases 900 recording instruments (TEXANS) from the IRIS-PASSCAL instrument center were used to record the acoustic energy generated by explosion shots. In both experiments the shots consisted of 1 TM of explosives fired in ~30 m deep boreholes. Although the data quality varies from shot to shot, key seismic phases as Pg, PmP, Pn, and a few intra-crustal arrivals have been identified to constrain the velocity-depth structure along the whole transect. Forward modelling of the seismic reflection/refraction phases reveals a crust consisting of 3 layers in average. The Moho topography shows from south to north a relatively moderate crustal root beneath the High Atlas, which can reach 40-42 km depth. The crust is thicker beneath the Rif where the Moho is imaged as an asymmetric feature that locally defines a crustal root reaching depths of 50 km and suggesting a crustal imbrication. P wave velocities are rather low in the crust and upper mantle. First arrivals/reflections tomography supports the forward modelling results. Low fold wide-angle stacks obtained by using hyperbolic move-out reveals the geometry of the Moho along the entire transect. Beneath the Atlas, the moderate crustal root inferred is not isostatically consistent with the high surface elevations, hence supporting the idea of a 'mantle plume' as main contributor to the Atlas

  14. TOXICITY, BIOCONCENTRATION, AND METABOLISM OF THE HERBICIDE PROPANIL (3',4'-DICHLOROPROPIONANILIDE) IN FRESHWATER FISH

    EPA Science Inventory

    Fathead minnows (Pimephales promelas) were exposed to technical grade propanil (3',4'-dichloropropionanilide) in a flow-through diluter system to determine acute lethality. LC50 values were 11.5, 10.2, 8.6, and 3.4 mg.per L at 24, 48, 96, and 192 hr, respectively. Eggs, newly hat...

  15. REACTION OF CYCLOPENTA[CD]PYRENE-3,4-EPOXIDE WITH DNA AND DEOXYNUCLEOTIDES

    EPA Science Inventory

    Cyclopenta[cd]pyrene (CPP) is a ubiquitous polycyclic aromatic hydrocarbon with potent mutagenic and carcinogenic activity. he trans isomer of 3,4-dihydro-3,4-dihydroxy-cyclopenta[cd]pyrene has been shown to be the major metabolic product of CPP in rat, mouse, or human microsomal...

  16. The Phenolic, 3,4-Dihydroxybenzoic Acid, is an Endogenous Regulator of Rooting in Protea Cynaroides

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Bioassays indicated the presence of allelochemicals in Protea cynaroides stem cuttings. Analysis of stem extracts identified large quantities of 3,4-dihydroxybenzoic acid and other simlar phenolics. Phytotoxicity bioassay showed that 3,4-dihydroxybenzoic acid both stimulated and inhibited root gro...

  17. 43 CFR 3420.3-4 - Regional tract ranking, selection, environmental analysis and scheduling.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 43 Public Lands: Interior 2 2013-10-01 2013-10-01 false Regional tract ranking, selection, environmental analysis and scheduling. 3420.3-4 Section 3420.3-4 Public Lands: Interior Regulations Relating to Public Lands (Continued) BUREAU OF LAND MANAGEMENT, DEPARTMENT OF THE INTERIOR MINERALS MANAGEMENT (3000) COMPETITIVE LEASING Competitive...

  18. Natural and synthetic diastereoisomeric (−)-3′,4′,7-trihydroxyflavan-3,4-diols

    PubMed Central

    Drewes, S. E.; Roux, D. G.

    1965-01-01

    1. Rhodesian copalwood (Guibourtia coleosperma) contains three diastereo-isomeric leuco-fisetinidins. These consist of the (−)-2,3-cis–3,4-cis (2R,3R,4R) and (−)-2,3-cis–3,4-trans (2R,3R,4S) 3′,4′,7-trihydroxyflavan-3,4-diols, and the third was shown to be a 2,3-trans–3,4-cis isomer by means of paper ionophoresis. 2. There occurrence in similar proportions as tannin precursors also in the tropical hardwoods G. tessmannii and G. demeusii implies a close taxonomic relationship between these, and with G. coleosperma. 3. Epimerization of the natural (−)-3′,4′,7- trihydroxy-2,3-trans-flavan-3,4-trans-diol affords a mixture from which the (−)-2,3-cis–3,4-cis isomer was separated readily, but the (−)-2,3-trans–3,4-cis isomer was obtained with difficulty. These were formed by epimerization of the (−)-2,3-trans–3,4-trans isomer at C-2 and C-4, and at C-4, respectively. PMID:5862407

  19. Improved Coal-Thickness Measurement

    NASA Technical Reports Server (NTRS)

    Barr, T. A.

    1984-01-01

    Summed signals and dielectric-filled antenna improve measurement. Improved FM radar for measuring thickness of coal seam eliminates spectrum splitting and reduces magnitude of echo from front coal surface.

  20. Metal thickness measurements using radiography

    NASA Astrophysics Data System (ADS)

    Achrekar, P. M.

    1986-04-01

    The present invention relates broadly to a radiographic inspection technique, and in particular to a metal thickness measurement method using radiography. The localized areas wherein the effective metal thickness is less than the minimum that is required for radiation shielding and which can render a shielding enclosure functionless, is readily determined. The invention comprises a process for assuring metal thickness in small regions. The actual metal thickness of small regions can be verified by comparing the optical densities of sections of the metal i.e., stepwedge. A comparator microphotometer, which compares optical densities of spectrum lines from spectrophotometers, compares the optical density of spectrum lines on an exposed spectrum plate (metal under test) with a standard plate (stepwedge).

  1. Edge-on thick discs

    NASA Astrophysics Data System (ADS)

    Kasparova, A.; Katkov, I.; Chilingarian, I.; Silchenko, O.; Moiseev, A.; Borisov, S.

    2016-06-01

    Although thick stellar discs are detected in nearly all edge-on disc galaxies, their formation scenarios still remain a matter of debate. Due to observational difficulties, there is a lack of information about their stellar populations. Using the Russian 6-m telescope BTA we collected deep spectra of thick discs in three edge-on early-type disc galaxies located in different environments: NGC4111 in a dense group, NGC4710 in the Virgo cluster, and NGC5422 in a sparse group. We see intermediate age (4 ‑ 5 Gyr) metal rich ([Fe/H] ~ ‑0.2 ‑ 0.0 dex) stellar populations in NGC4111 and NGC4710. On the other hand, NGC5422 does not harbour young stars, its only disc is thick and old (10 Gyr) and its α-element abundance suggests a long formation epoch implying its formation at high redshift. Our results prove the diversity of thick disc formation scenarios.

  2. ICESat: Sea ice freeboard, snow depth, and thickness

    NASA Astrophysics Data System (ADS)

    Kwok, R.

    2007-12-01

    Total freeboard (snow and ice) and thickness of the Arctic Ocean sea ice cover are derived from ICESat data for two 35-day periods: one during the fall (Oct-Nov) of 2005 and the other during the winter (Feb-Mar) of 2006. Our freeboard retrieval approach is based on reflectivity and the expected statistics of freeboard variability from combined analysis of RADARSAT/ICESat data. Results suggest that our retrieval procedures could provide consistent freeboard estimates along 25-km segments with uncertainties of better than several centimeters. With a climatology of snow density, ECMWF snowfall is used to construct a time-varying field of snow depth for the conversion of freeboard to sea ice thickness. The derived ice thickness estimates are compared with ice draft observations from moored upward looking sonar data and the snow depth/thickness data from mass balance buoys in the Beaufort Sea. Preliminary results show that the estimated ICESat thickness estimates are within 0.5 m of the ice drafts reported by moorings. In this talk, we highlight some of the issues associated with the process of freeboard retrieval, thickness estimation, and quality assessment due to the disparity of spatial resolution between the ICESat footprint and those from in-situ measurements.

  3. Peripapillary choroidal thickness in childhood.

    PubMed

    Read, Scott A; Alonso-Caneiro, David; Vincent, Stephen J; Collins, Michael J

    2015-06-01

    Changes in the thickness of the invivo peripapillary choroid have been documented in a range of ocular conditions in adults; however, choroidal thickness in the peripapillary region of children has not been examined in detail. This study therefore aimed to investigate the thickness of the peripapillary choroid and the overlying retinal nerve fibre layer (RNFL) in a population of normal children with a range of refractive errors. Ninety-three children (37 myopes and 56 non-myopes) aged between 11 and 16 years, had measurements of peripapillary choroidal and RNFL thickness derived from enhanced depth imaging optical coherence tomography images (EDI-OCT, Heidelberg Spectralis). The average thickness was determined in a series of five 0.25 mm width concentric annuli (each divided into 8 equal sized 45° sectors) centred on the optic nerve head boundary, accounting for individual ocular magnification factors and the disc-fovea angle. Significant variations in peripapillary choroidal thickness were found to occur with both annulus location (p < 0.001) and sector position (p < 0.001) in this population of children. The innermost annulus (closest to the edge of the optic disc) exhibited the thinnest choroid (mean 77 ± 16 μm) and the outermost annulus, the thickest choroid (191 ± 52 μm). The choroid was thinnest inferior to the optic nerve head (139 ± 38 μm) and was thickest in the superior temporal sector (157 ± 40 μm). Significant differences in the distribution of choroidal thickness were also associated with myopia, with myopic children having significantly thinner choroids in the inner and outer annuli of the nasal and temporal sectors respectively (p < 0.001). RNFL thickness also varied significantly with annulus location and sector (p < 0.001), and showed differences in thickness distribution associated with refractive error. This study establishes the normal variations in the thickness of the peripapillary choroid with radial distance and azimuthal angle

  4. Inositol 1,3,4,6-tetrakisphosphate mobilizes calcium in Xenopus oocytes with high potency.

    PubMed Central

    Ivorra, I; Gigg, R; Irvine, R F; Parker, I

    1991-01-01

    Injection of Ins(1,3,4,6)P4 into Xenopus oocytes evoked Ca2(+)-dependent membrane currents with a potency 5-10 times less than Ins(1,4,5)P3, whereas Ins(1,3,4)P3 and Ins(1,3,4,5,6)P5 were almost ineffective. Responses to Ins(1,3,4,6)P4 arose through liberation of intracellular Ca2+ and through entry of extracellular Ca2+. These results, together with the observation that Ins(1,3,4,6)P4 facilitated responses to Ins(1,4,5)P3, suggests that both of these compounds may act on the same intracellular receptors. PMID:1991032

  5. The ion population between 1300 km and 230000 km in the coma of comet P/Halley

    NASA Technical Reports Server (NTRS)

    Altwegg, K.; Balsiger, H.; Geiss, J.; Goldstein, R.; Ip, W. -H.; Meier, A.; Neugebauer, M.; Rosenbauer, H.; Shelley, E.

    1993-01-01

    During the encounter of the spacecraft Giotto with Comet Halley the two sensors of the ion mass spectrometer (IMS), high energy range spectrometer (HERS) and high intensity spectrometer (HIS), measured the mass and the three-dimensional velocity distributions of cometary ions. HIS looked mainly at the cold, slow part of the distribution close to the nucleus, HERS at the more energetic pick-up ions further out. After a thorough recalibration of the HIS flight spare unit and an extensive data analysis we present here continuous ion density-, composition-, velocity-, and temperature profiles for the water group ion (mass range 16-19 amu/e) along Giotto's inbound trajectory from 230,000 to 1300 km from the comet nucleus. The two sensors are in very good agreement in the region where their measurements overlap thus giving an excellent data base for the discussion of theoretical comet models. The most prominent feature where models and observations disagree is the so called pile up region between 8000 and 15,000 km from the nucleus.

  6. 2540 km: bimagic baseline for neutrino oscillation parameters.

    PubMed

    Dighe, Amol; Goswami, Srubabati; Ray, Shamayita

    2010-12-31

    We show that a source-to-detector distance of 2540 km, motivated recently [S. K. Raut, R. S. Singh, and S. U. Sankar, arXiv:0908.3741] for a narrow band superbeam, offers multiple advantages for a low energy neutrino factory with a detector that can identify muon charge. At this baseline, for any neutrino hierarchy, the wrong-sign muon signal is almost independent of CP violation and θ(13) in certain energy ranges. This allows the identification of the hierarchy in a clean way. In addition, part of the muon spectrum is also sensitive to the CP violating phase and θ(13), so that the same setup can be used to probe these parameters as well. PMID:21231644

  7. Transport System for Delivery Tourists At Altitude 140 km

    NASA Technical Reports Server (NTRS)

    Bolonkin, Alexander

    2002-01-01

    The author offers a new method and installation for flight in space. This method uses the centrifugal force of a rotating circular cable that provides a means for the launch of a payload into outer space, to keep the fixed space stations at high altitudes (up to 200 km). The method may also be useful for landing to space bodies, for launching of the space ships (crafts), and for moving and accelerating other artificial apparatuses. The offered installation may be used as a propulsion system for space ships and/or probes. This system uses the material of any space body (i.e. stones) for acceleration and change of the space vehicle trajectory. The suggested system may be also used as a high capacity energy accumulator.

  8. Readout and data acquisition for KM3NeT

    NASA Astrophysics Data System (ADS)

    Belias, Anastasios; Manolopoulos, Konstantinos

    2013-05-01

    In the KM3NeT neutrino telescope design the readout concept is based on a point-to-point network connecting tenthousands of optical modules in the deep sea through a photonic network with the shore station. The time-over-threshold data from each Photo Multiplier Tube (PMT) of each optical module will be send to shore over fibres using dedicated wavelengths. Nanosecond timing accuracy will be schieved using a clock signal embedded in the data stream and measuring the roundtrip time from the shore to each optical module individually. The DAQ software architecture based on the Internet Communications Engine (ICE) will provide a common and uniform software framework for the control of each optical module and the data acquisition of the whole neutrino telescope.

  9. Fatal truck-bicycle accident involving dragging for 45 km.

    PubMed

    Klintschar, M; Darok, M; Roll, P

    2003-08-01

    Vehicle-bicycle accidents with subsequent dragging of the rider over long distances are extremely rare. The case reported here is that of a 16-year-old mentally retarded bike rider who was run over by a truck whose driver failed to notice the accident. The legs of the victim became trapped by the rear axle of the trailer and the body was dragged over 45 km before being discovered under the parked truck. The autopsy revealed that the boy had died from the initial impact and not from the dragging injuries which had caused extensive mutilation. The reports of the technical expert and the forensic pathologist led the prosecutor to drop the case against the truck driver for manslaughter. PMID:12748865

  10. Calibration methods and tools for KM3NeT

    NASA Astrophysics Data System (ADS)

    Kulikovskiy, Vladimir

    2016-04-01

    The KM3NeT detectors, ARCA and ORCA, composed of several thousands digital optical modules, are in the process of their realization in the Mediterranean Sea. Each optical module contains 31 3-inch photomultipliers. Readout of the optical modules and other detector components is synchronized at the level of sub-nanoseconds. The position of the module is measured by acoustic piezo detectors inside the module and external acoustic emitters installed on the bottom of the sea. The orientation of the module is obtained with an internal attitude and heading reference system chip. Detector calibration, i.e. timing, positioning and sea-water properties, is overviewed in this talk and discussed in detail in this conference. Results of the procedure applied to the first detector unit ready for installation in the deep sea will be shown.

  11. Estimating worldwide solar radiation resources on a 40km grid

    SciTech Connect

    Maxwell, E.L.; George, R.L.; Brady, E.H.

    1996-11-01

    During 1995, the National Renewable Energy Laboratory (NREL), initiated the Data Grid Task under the auspices of DOE`s Resource Assessment Program. A data grid is a framework of uniformly spaced locations (grid points) for which data are available. Estimates of monthly averages of direct normal, diffuse horizontal, and global horizontal daily-total solar radiation energy (kWh/m{sup 2}) are being made for each point on a grid covering the US, Mexico, the Caribbean, and southern Canada. The grid points are separated by approximately 40 km. Using interpolation methods, the digital data grid can be used to estimate solar resources at any location. The most encouraging result to date has been the location of sources providing worldwide data for most of the input parameters required for modeling daily total solar radiation. This is a multiyear task expected to continue through the rest of this century.

  12. Inositol 1,3,4,5,6-Pentakisphosphate 2-Kinase from Maize: Molecular and Biochemical Characterization[OA

    PubMed Central

    Sun, Yuejin; Thompson, Mark; Lin, Gaofeng; Butler, Holly; Gao, Zhifang; Thornburgh, Scott; Yau, Kerrm; Smith, Doug A.; Shukla, Vipula K.

    2007-01-01

    Inositol 1,3,4,5,6-pentakisphosphate 2-kinase, an enzyme encoded by the gene IPK1, catalyzes the terminal step in the phytic acid biosynthetic pathway. We report here the isolation and characterization of IPK1 cDNA and genomic clones from maize (Zea mays). DNA Southern-blot analysis revealed that ZmIPK1 in the maize genome constitutes a small gene family with two members. Two nearly identical ZmIPK1 paralogs, designated as ZmIPK1A and ZmIPK1B, were identified. The transcripts of ZmIPK1A were detected in various maize tissues, including leaves, silks, immature ears, seeds at 12 d after pollination, midstage endosperm, and maturing embryos. However, the transcripts of ZmIPK1B were exclusively detected in roots. A variety of alternative splicing products of ZmIPK1A were discovered in maize leaves and seeds. These products are derived from alternative acceptor sites, alternative donor sites, and retained introns in the transcripts. Consequently, up to 50% of the ZmIPK1A transcripts in maize seeds and leaves have an interrupted open reading frame. In contrast, only one type of splicing product of ZmIPK1B was detected in roots. When expressed in Escherichia coli and subsequently purified, the ZmIPK1 enzyme catalyzes the conversion of myo-inositol 1,3,4,5,6-pentakisphosphate to phytic acid. In addition, it is also capable of catalyzing the phosphorylation of myo-inositol 1,4,6-trisphosphate, myo-inositol 1,4,5,6-tetrakisphosphate, and myo-inositol 3,4,5,6-tetrakisphosphate. Nuclear magnetic resonance spectroscopy analysis indicates that the phosphorylation product of myo-inositol 1,4,6-trisphosphate is inositol 1,2,4,6-tetrakisphosphate. Kinetic studies showed that the Km for ZmIPK1 using myo-inositol 1,3,4,5,6-pentakisphosphate as a substrate is 119 μm with a Vmax at 625 nmol/min/mg. These data describing the tissue-specific accumulation and alternative splicing of the transcripts from two nearly identical ZmIPK1 paralogs suggest that maize has a highly sophisticated

  13. Constraining density and velocity jumps across the 410 km discontinuity

    NASA Astrophysics Data System (ADS)

    Saki, Morvarid; Thomas, Christine; Cobden, Laura; Abreu, Rafael

    2016-04-01

    We investigate the velocity and density structure of the olivine-to-wadsleyite transition using polarities of precursor arrivals to PP seismic waves that reflect off the 410 km discontinuity beneath the Northern Atlantic. Numerous source-receiver combinations have been used in order to collect a dataset of reflection points beneath our investigation area. We analyzed over 1700 seismograms from Mw > 5.8 using array seismology methods to enhance the signal to noise ratio. For each event the polarity of the PP phase is compared to polarity of the precursor signal and we find several events where the polarity of the precursors are opposite to that of PP. There does not seem to be any dependency of the observed polarities on the propagation direction of the seismic waves but interestingly there seems to be a dependency on the distance between source and receiver. The events with epicentral distances greater than 119 degrees mostly show opposite polarities, while for those with smaller epicentral distances the same polarity of the main phase and precursor signal is dominant. Using Zeoppritz equations, we analyzed more than 64 million combinations of density, compressional and shear wave velocities for both layers, above and below the 410 km discontinuity in order to find the best combination of those parameters that can explain the observations. The results are indicating combinations of density, P and S wave velocity exhibiting a smaller contrast compared to those from the pyrolite model (the density jump, however is still positive to provide physically meaningful results). The calculated reductions in both compressional and shear wave velocities go up to 13% but mostly fall within the range of less than 7- 8%. We interpret this reduction in elastic properties and seismic velocity of minerals as the effect of a higher than normal content of water of wadsleyite in this region, while we can exclude a reduction in iron.

  14. Dysregulation of Kv3.4 channels in dorsal root ganglia following spinal cord injury.

    PubMed

    Ritter, David M; Zemel, Benjamin M; Hala, Tamara J; O'Leary, Michael E; Lepore, Angelo C; Covarrubias, Manuel

    2015-01-21

    Spinal cord injury (SCI) patients develop chronic pain involving poorly understood central and peripheral mechanisms. Because dysregulation of the voltage-gated Kv3.4 channel has been implicated in the hyperexcitable state of dorsal root ganglion (DRG) neurons following direct injury of sensory nerves, we asked whether such a dysregulation also plays a role in SCI. Kv3.4 channels are expressed in DRG neurons, where they help regulate action potential (AP) repolarization in a manner that depends on the modulation of inactivation by protein kinase C (PKC)-dependent phosphorylation of the channel's inactivation domain. Here, we report that, 2 weeks after cervical hemicontusion SCI, injured rats exhibit contralateral hypersensitivity to stimuli accompanied by accentuated repetitive spiking in putative DRG nociceptors. Also in these neurons at 1 week after laminectomy and SCI, Kv3.4 channel inactivation is impaired compared with naive nonsurgical controls. At 2-6 weeks after laminectomy, however, Kv3.4 channel inactivation returns to naive levels. Conversely, Kv3.4 currents at 2-6 weeks post-SCI are downregulated and remain slow-inactivating. Immunohistochemistry indicated that downregulation mainly resulted from decreased surface expression of the Kv3.4 channel, as whole-DRG-protein and single-cell mRNA transcript levels did not change. Furthermore, consistent with Kv3.4 channel dysregulation, PKC activation failed to shorten the AP duration of small-diameter DRG neurons. Finally, re-expressing synthetic Kv3.4 currents under dynamic clamp conditions dampened repetitive spiking in the neurons from SCI rats. These results suggest a novel peripheral mechanism of post-SCI pain sensitization implicating Kv3.4 channel dysregulation and potential Kv3.4-based therapeutic interventions. PMID:25609640

  15. Dysregulation of Kv3.4 Channels in Dorsal Root Ganglia Following Spinal Cord Injury

    PubMed Central

    Ritter, David M.; Zemel, Benjamin M.; Hala, Tamara J.; O'Leary, Michael E.; Lepore, Angelo C.

    2015-01-01

    Spinal cord injury (SCI) patients develop chronic pain involving poorly understood central and peripheral mechanisms. Because dysregulation of the voltage-gated Kv3.4 channel has been implicated in the hyperexcitable state of dorsal root ganglion (DRG) neurons following direct injury of sensory nerves, we asked whether such a dysregulation also plays a role in SCI. Kv3.4 channels are expressed in DRG neurons, where they help regulate action potential (AP) repolarization in a manner that depends on the modulation of inactivation by protein kinase C (PKC)-dependent phosphorylation of the channel's inactivation domain. Here, we report that, 2 weeks after cervical hemicontusion SCI, injured rats exhibit contralateral hypersensitivity to stimuli accompanied by accentuated repetitive spiking in putative DRG nociceptors. Also in these neurons at 1 week after laminectomy and SCI, Kv3.4 channel inactivation is impaired compared with naive nonsurgical controls. At 2–6 weeks after laminectomy, however, Kv3.4 channel inactivation returns to naive levels. Conversely, Kv3.4 currents at 2–6 weeks post-SCI are downregulated and remain slow-inactivating. Immunohistochemistry indicated that downregulation mainly resulted from decreased surface expression of the Kv3.4 channel, as whole-DRG-protein and single-cell mRNA transcript levels did not change. Furthermore, consistent with Kv3.4 channel dysregulation, PKC activation failed to shorten the AP duration of small-diameter DRG neurons. Finally, re-expressing synthetic Kv3.4 currents under dynamic clamp conditions dampened repetitive spiking in the neurons from SCI rats. These results suggest a novel peripheral mechanism of post-SCI pain sensitization implicating Kv3.4 channel dysregulation and potential Kv3.4-based therapeutic interventions. PMID:25609640

  16. Aromatic Heterocycle 1,3,4-Oxadiazole-Substituted Thieno[3,4-b]thiophene to Build Low-Bandgap Polymer for Photovoltaic Application.

    PubMed

    Zhu, Dangqiang; Sun, Liang; Liu, Qian; Wen, Shuguang; Han, Liangliang; Bao, Xichang; Yang, Renqiang

    2015-12-01

    Electron-deficient heterocycle 1,3,4-oxadiazole is first introduced to the 2-position of thieno[3,4-b]thiophene (TT) to construct a new building block 2-(thieno[3,4-b]thiophen-2-yl)-5-(alkylthio)-1,3,4-oxadiazole (TTSO) with alkylthio chain. The polymer PBDT-TTSO based on TTSO and benzodithiophene (BDT) exhibits a deep lying highest occupied molecular orbital (HOMO) energy level of -5.32 eV and low-bandgap of 1.62 eV. The power conversion efficiency (PCE) of 5.86% is obtained with a relatively high V OC of 0.74 V, a J SC of 13.1 mA cm(-2), and FF of 60.5%. Furthermore, as S atom in thioether can be oxidized easily, the optoelectronic properties of PBDT-TTSO treated with different oxidants are preliminary investigated. Interestingly, the oxidation products still maintain high PCE with reduction less than 30%. This work demonstrates a new method to regulate HOMO energy levels by introducing electron-deficient aromatic heterocyclic moiety. PMID:26332871

  17. Models of crustal thickness for South America from seismic refraction, receiver functions and surface wave tomography

    NASA Astrophysics Data System (ADS)

    Assumpção, Marcelo; Feng, Mei; Tassara, Andrés; Julià, Jordi

    2013-12-01

    An extensive compilation of crustal thicknesses is used to develop crustal models in continental South America. We consider point crustal thicknesses from seismic refraction experiments, receiver function analyses, and surface-wave dispersion. Estimates of crustal thickness derived from gravity anomalies were only included along the continental shelf and in some areas of the Andes to fill large gaps in seismic coverage. Two crustal models were developed: A) by simple interpolation of the point estimates, and B) our preferred model, based on the same point estimates, interpolated with surface-wave tomography. Despite gaps in continental coverage, both models reveal interesting crustal thickness variations. In the Andean range, the crust reaches 75 km in Southern Peru and the Bolivian Altiplano, while crustal thicknesses seem to be close to the global continental average (~ 40 km) in Ecuador and southern Colombia (despite high elevations), and along the southern Andes of Chile-Argentina (elevation lower than 2000 m). In the stable continental platform the average thickness is 38 ± 5 km (1-st. deviation) and no systematic differences are observed among Archean-Paleoproterozoic cratons, NeoProterozoic fold belts, and low-altitude intracratonic sedimentary basins. An exception is the Borborema Province (NE Brazil) with crust ~ 30-35 km thick. Narrow belts surrounding the cratons are suggested in central Brazil, parallel to the eastern and southern border of the Amazon craton, and possibly along the TransBrasiliano Lineament continuing into the Chaco basin, where crust thinner than 35 km is observed. In the sub-Andean region, between the mid-plate cratons and the Andean cordillera, the crust tends to be thinner (~ 35 km) than the average crust in the stable platform, a feature possibly inherited from the old pre-Cambrian history of the continent. We expect that these crustal models will be useful for studies of isostasy, dynamic topography, and crustal evolution of the

  18. Models of Crustal Thickness for South America from Seismic Refraction, Receiver Functions and Surface Wave Tomography

    NASA Astrophysics Data System (ADS)

    Assumpcao, M.; Feng, M.; Tassara, A.; Julia, J.

    2013-05-01

    An extensive compilation of crustal thicknesses is used to develop crustal models in continental South America. We consider point crustal thicknesses from seismic seismic refraction experiments, receiver function analyses, and surface-wave dispersion. Estimates of crustal thickness derived from gravity anomalies were only included along the continental shelf and in some areas of the Andes to fill large gaps in seismic coverage. Two crustal models were developed: A) by simple interpolation of the ~1000 point estimates, and B) our preferred model, based on the same point estimates, interpolated with surface-wave tomography. Despite gaps in continental coverage, both models reveal interesting crustal thickness variations. In the Andean range, the crust reaches 75 km in Southern Peru and the Bolivian Altiplano, while crustal thicknesses seem to be close to the global continental average (~40 km) in Ecuador and southern Colombia (despite high elevations), and along the southern Andes of Chile-Argentina (elevation lower than 2000 m). In the stable continental platform the average thickness is 38 ± 5 km (1 std. deviation) and no systematic differences are observed among Archean-Paleoproterozoic cratons, NeoProterozoic fold belts, and low-altitude intracratonic sedimentary basins. An exception is the Borborema Province (NE Brazil) with crust ~30-35 km thick. Narrow belts surrounding the cratons are suggested in central Brazil, parallel to the eastern and southern border of the Amazon craton, and possibly along the Transbrasiliano Lineament continuing into the Chaco basin, where crust thinner than 35 km is observed. In the sub-Andean region, between the mid-plate cratons and the Andean cordillera, the crust tends to be thinner (~35 km) than the average crust in the stable platform, a feature possibly inherited from the old pre-Cambrian history of the continent. We expect these crustal models will be useful for studies of isostasy, dynamic topography, and crustal evolution

  19. On the Spatial Variability of the Martian Elastic Lithosphere Thickness: Evidence for Mantle Plumes?

    NASA Astrophysics Data System (ADS)

    Grott, M.; Breuer, D.

    2009-12-01

    The elastic lithosphere thickness at the Martian North Pole has recently been constrained by estimating the flexural response of the lithosphere to loading at the polar caps and a minimum elastic thickness of 300 km has been determined. This is a factor of three to four larger than elastic thickness estimates for other Amazonian surface units like the Tharsis volcanoes, which exhibit elastic thicknesses around 75 to 90 km. Here we investigate the spatial heterogeneity of the Martian elastic lithosphere thickness and present a model which takes the locally varying crustal thickness, the local concentration of heat producing elements as well as variations of strain rate into account. The model predicts D = 225 km at the North Pole today, whereas D = 75-90 km is obtained at the Tharsis volcanoes if a mid Amazonian loading age is assumed. Therefore, although a large degree of spatial heterogeneity can be explained by the presented model, large elastic thicknesses in excess of 300 km cannot be reproduced. In order to fit all elastic thickness values derived from observations the mantle heat flow at the North Pole needs to be smaller than the global average. A local reduction of heat flow by 25% with respect to the chondritic value would be sufficient to explain the large elastic thicknesses observed there. However, a local reduction of heat flow can only be reconciled with a bulk chondritic concentration of heat producing elements in the Martian interior if the excess heat is deposited elsewhere. This could be achieved by mantle plumes, possibly active underneath Tharsis. The size and strength of such a plume is constrained by the elastic thickness at the Tharsis Montes and maximum average heat flows between 8 and 20 mW/m2, corresponding to central peak heat flows of 40 to 100 mW/m2, are consistent with the observations. Such a plume would leave a clear signature in the surface heat flow and should be readily detectable by in-situ heat flow measurements. Gray

  20. Regional crustal thickness and precipitation in young mountain chains

    PubMed Central

    Ernst, W. G.

    2004-01-01

    Crustal thickness is related to climate through precipitation-induced erosion. Along the Andes, the highest mountains and thickest crust (≈70 km) occur at 25° south, a region of low precipitation. Westerly winds warm passing over the Atacama Desert; precipitation is modest in the High Andes and eastward over the Altiplano. Severe aridity, hence low erosion rates, helps to account for the elevated volcanogenic contractional arc and high, internally draining plateau in its rain shadow. Weak erosion along the north-central arc provides scant amounts of sediment to the Chile–Peru Trench, starving the subduction channel. Subcrustal removal might be expected to reduce the crustal thickness, but is not a factor at 25° south. The thickness of the gravitationally compensated continental crust cannot reflect underplating and/or partial fusion of sediments, but must be caused chiefly by volcanism-plutonism and contraction. Contrasting climate typifies the terrane at 45° south where moisture-laden westerly winds encounter a cool margin, bringing abundant precipitation. The alpine landscape is of lower average elevation compared with the north-central Andes and is supported by thinner continental crust (≈35 km). Intense erosion supplies voluminous clastic debris to the offshore trench, and vast quantities are subducted. However, the southern Andean crust is only about half as thick as that at 25° south, suggesting that erosion, not subcrustal sediment accretion or anatexis, is partly responsible for the thickness of the mountain belt. The Himalayas plus Tibetan Plateau, the Sierra Nevada plus Colorado Plateau, and the Japanese Islands exhibit analogous relationships between crustal thickness and climate. PMID:15471988

  1. Regional crustal thickness and precipitation in young mountain chains.

    PubMed

    Ernst, W G

    2004-10-19

    Crustal thickness is related to climate through precipitation-induced erosion. Along the Andes, the highest mountains and thickest crust (approximately 70 km) occur at 25 degrees south, a region of low precipitation. Westerly winds warm passing over the Atacama Desert; precipitation is modest in the High Andes and eastward over the Altiplano. Severe aridity, hence low erosion rates, helps to account for the elevated volcanogenic contractional arc and high, internally draining plateau in its rain shadow. Weak erosion along the north-central arc provides scant amounts of sediment to the Chile-Peru Trench, starving the subduction channel. Subcrustal removal might be expected to reduce the crustal thickness, but is not a factor at 25 degrees south. The thickness of the gravitationally compensated continental crust cannot reflect underplating and/or partial fusion of sediments, but must be caused chiefly by volcanism-plutonism and contraction. Contrasting climate typifies the terrain at 45 degrees south where moisture-laden westerly winds encounter a cool margin, bringing abundant precipitation. The alpine landscape is of lower average elevation compared with the north-central Andes and is supported by thinner continental crust (approximately 35 km). Intense erosion supplies voluminous clastic debris to the offshore trench, and vast quantities are subducted. However, the southern Andean crust is only about half as thick as that at 25 degrees south, suggesting that erosion, not subcrustal sediment accretion or anatexis, is partly responsible for the thickness of the mountain belt. The Himalayas plus Tibetan Plateau, the Sierra Nevada plus Colorado Plateau, and the Japanese Islands exhibit analogous relationships between crustal thickness and climate. PMID:15471988

  2. Photographer : JPL Range : 241,000km (150,600 mi.). This black and white image of Europa, smallest

    NASA Technical Reports Server (NTRS)

    1979-01-01

    Photographer : JPL Range : 241,000km (150,600 mi.). This black and white image of Europa, smallest of Jupiter's four Galilean satellites, was acquired by Voyager 2. Europa, the brightest of the Galiliean satellites, has a density slightly less than Io, suggesting it has a substantial quantity of water. Scientists previously speculated that the water must have cooled from the interior and formed a mantle of ice perhaps 100 km thick. The complex patterns on its surface suggest that the icy surface was fractured, and that the cracks filled with dark material from below. Very few impact craters are visible on the surface, suggesting that active processes on the surface are still modifying Europa. The tectonic pattern seen on its surface differs drastically from the fault systems seen on Ganymede where pieces of the crust have moved relative to each other. On Europa, the crust evidently fractures but the pieces remain in roughly their original position.

  3. Evaluation of the 7-km GEOS-5 Nature Run

    NASA Technical Reports Server (NTRS)

    Gelaro, Ronald; Putman, William M.; Pawson, Steven; Draper, Clara; Molod, Andrea; Norris, Peter M.; Ott, Lesley; Prive, Nikki; Reale, Oreste; Achuthavarier, Deepthi; Bosilovich, Michael; Buchard, Virginie; Chao, Winston; Coy, Lawrence; Cullather, Richard; da Silva, Arlindo; Darmenov, Anton; Koster, Randal; McCarty, Will; Schubert, Siegfried

    2015-01-01

    This report documents an evaluation by the Global Modeling and Assimilation Office (GMAO) of a two-year 7-km-resolution non-hydrostatic global mesoscale simulation produced with the Goddard Earth Observing System (GEOS-5) atmospheric general circulation model. The simulation was produced as a Nature Run for conducting observing system simulation experiments (OSSEs). Generation of the GEOS-5 Nature Run (G5NR) was motivated in part by the desire of the OSSE community for an improved high-resolution sequel to an existing Nature Run produced by the European Centre for Medium-Range Weather Forecasts (ECMWF), which has served the community for several years. The intended use of the G5NR in this context is for generating simulated observations to test proposed observing system designs regarding new instruments and their deployments. Because NASA's interest in OSSEs extends beyond traditional weather forecasting applications, the G5NR includes, in addition to standard meteorological components, a suite of aerosol types and several trace gas concentrations, with emissions downscaled to 10 km using ancillary information such as power plant location, population density and night-light information. The evaluation exercise described here involved more than twenty-five GMAO scientists investigating various aspects of the G5NR performance, including time mean temperature and wind fields, energy spectra, precipitation and the hydrological cycle, the representation of waves, tropical cyclones and midlatitude storms, land and ocean surface characteristics, the representation and forcing effects of clouds and radiation, dynamics of the stratosphere and mesosphere, and the representation of aerosols and trace gases. Comparisons are made with observational data sets when possible, as well as with reanalyses and other long model simulations. The evaluation is broad in scope, as it is meant to assess the overall realism of basic aspects of the G5NR deemed relevant to the conduct of OSSEs

  4. Tube wall thickness measurement apparatus

    DOEpatents

    Lagasse, Paul R.

    1987-01-01

    An apparatus for measuring the thickness of a tube's wall for the tube's entire length and circumference by determining the deviation of the tube wall thickness from the known thickness of a selected standard item. The apparatus comprises a base and a first support member having first and second ends. The first end is connected to the base and the second end is connected to a spherical element. A second support member is connected to the base and spaced apart from the first support member. A positioning element is connected to and movable relative to the second support member. An indicator is connected to the positioning element and is movable to a location proximate the spherical element. The indicator includes a contact ball for first contacting the selected standard item and holding it against the spherical element. The contact ball then contacts the tube when the tube is disposed about the spherical element. The indicator includes a dial having a rotatable needle for indicating the deviation of the tube wall thickness from the thickness of the selected standard item.

  5. Tube wall thickness measurement apparatus

    DOEpatents

    Lagasse, P.R.

    1985-06-21

    An apparatus for measuring the thickness of a tube's wall for the tube's entire length and radius by determining the deviation of the tube wall thickness from the known thickness of a selected standard item. The apparatus comprises a base and a first support member having first and second ends. The first end is connected to the base and the second end is connected to a spherical element. A second support member is connected to the base and spaced apart from the first support member. A positioning element is connected to and movable relative to the second support member. An indicator is connected to the positioning element and is movable to a location proximate the spherical element. The indicator includes a contact ball for first contacting the selected standard item and holding it against the spherical element. The contact ball then contacts the tube when the tube is disposed about the spherical element. The indicator includes a dial having a rotatable needle for indicating the deviation of the tube wall thickness from the thickness of the selected standard item.

  6. System for measuring film thickness

    DOEpatents

    Batishko, Charles R.; Kirihara, Leslie J.; Peters, Timothy J.; Rasmussen, Donald E.

    1990-01-01

    A system for determining the thicknesses of thin films of materials exhibiting fluorescence in response to exposure to excitation energy from a suitable source of such energy. A section of film is illuminated with a fixed level of excitation energy from a source such as an argon ion laser emitting blue-green light. The amount of fluorescent light produced by the film over a limited area within the section so illuminated is then measured using a detector such as a photomultiplier tube. Since the amount of fluorescent light produced is a function of the thicknesses of thin films, the thickness of a specific film can be determined by comparing the intensity of fluorescent light produced by this film with the intensity of light produced by similar films of known thicknesses in response to the same amount of excitation energy. The preferred embodiment of the invention uses fiber optic probes in measuring the thicknesses of oil films on the operational components of machinery which are ordinarily obscured from view.

  7. Toxicokinetics and biotransformation of 3-(4-methylbenzylidene)camphor in rats after oral administration

    SciTech Connect

    Voelkel, Wolfgang; Colnot, Thomas; Schauer, Ute M.D.; Broschard, Thomas H.; Dekant, Wolfgang . E-mail: dekant@toxi.uni-wuerzburg.de

    2006-10-15

    3-(4-Methylbenzylidene)camphor (4-MBC) is an UV-filter frequently used in sunscreens and cosmetics. Equivocal findings in some screening tests for hormonal activity initiated a discussion on a possible weak estrogenicity of 4-MBC. In this study, the toxicokinetics and biotransformation of 4-MBC were characterized in rats after oral administration. Male and female Sprague-Dawley rats (n = 3 per group) were administered single oral doses of 25 or 250 mg/kg bw of 4-MBC in corn oil. Metabolites formed were characterized and the kinetics of elimination for 4-MBC and its metabolites from blood and with urine were determined. Metabolites of 4-MBC were characterized by {sup 1}H NMR and LC-MS/MS as 3-(4-carboxybenzylidene)camphor and as four isomers of 3-(4-carboxybenzylidene)hydroxycamphor containing the hydroxyl group located in the camphor ring system with 3-(4-carboxybenzylidene)-6-hydroxycamphor as the major metabolite. After oral administration of 4-MBC, only very low concentrations of 4-MBC were present in blood and the peak concentrations of 3-(4-carboxybenzylidene)camphor were approximately 500-fold above those of 4-MBC; blood concentrations of 3-(4-carboxybenzylidene)-6-hydroxycamphor were below the limit of detection. Blood concentration of 4-MBC and 3-(4-carboxybenzylidene)camphor peaked within 10 h after 4-MBC administration and then decreased with half-lives of approximately 15 h. No major differences in peak blood levels between male and female rats were seen. In urine, one isomer of 3-(4-carboxybenzylidene)hydroxycamphor was the predominant metabolite [3-(4-carboxybenzylidene)-6-hydroxycamphor], the other isomers and 3-(4-carboxybenzylidene)camphor were only minor metabolites excreted with urine. However, urinary excretion of 4-MBC-metabolites represents only a minor pathway of elimination for 4-MBC, since most of the applied dose was recovered in feces as 3-(4-carboxybenzylidene)camphor and, to a smaller extent, as 3-(4-carboxybenzylidene)-6-hydroxycamphor

  8. Toxicokinetics and biotransformation of 3-(4-methylbenzylidene)camphor in rats after oral administration.

    PubMed

    Völkel, Wolfgang; Colnot, Thomas; Schauer, Ute M D; Broschard, Thomas H; Dekant, Wolfgang

    2006-10-15

    3-(4-Methylbenzylidene)camphor (4-MBC) is an UV-filter frequently used in sunscreens and cosmetics. Equivocal findings in some screening tests for hormonal activity initiated a discussion on a possible weak estrogenicity of 4-MBC. In this study, the toxicokinetics and biotransformation of 4-MBC were characterized in rats after oral administration. Male and female Sprague-Dawley rats (n = 3 per group) were administered single oral doses of 25 or 250 mg/kg bw of 4-MBC in corn oil. Metabolites formed were characterized and the kinetics of elimination for 4-MBC and its metabolites from blood and with urine were determined. Metabolites of 4-MBC were characterized by (1)H NMR and LC-MS/MS as 3-(4-carboxybenzylidene)camphor and as four isomers of 3-(4-carboxybenzylidene)hydroxycamphor containing the hydroxyl group located in the camphor ring system with 3-(4-carboxybenzylidene)-6-hydroxycamphor as the major metabolite. After oral administration of 4-MBC, only very low concentrations of 4-MBC were present in blood and the peak concentrations of 3-(4-carboxybenzylidene)camphor were approximately 500-fold above those of 4-MBC; blood concentrations of 3-(4-carboxybenzylidene)-6-hydroxycamphor were below the limit of detection. Blood concentration of 4-MBC and 3-(4-carboxybenzylidene)camphor peaked within 10 h after 4-MBC administration and then decreased with half-lives of approximately 15 h. No major differences in peak blood levels between male and female rats were seen. In urine, one isomer of 3-(4-carboxybenzylidene)hydroxycamphor was the predominant metabolite [3-(4-carboxybenzylidene)-6-hydroxycamphor], the other isomers and 3-(4-carboxybenzylidene)camphor were only minor metabolites excreted with urine. However, urinary excretion of 4-MBC-metabolites represents only a minor pathway of elimination for 4-MBC, since most of the applied dose was recovered in feces as 3-(4-carboxybenzylidene)camphor and, to a smaller extent, as 3-(4-carboxybenzylidene)-6-hydroxycamphor

  9. Enantioselective synthesis and antioxidant activity of 3,4,5-substituted piperidine derivatives.

    PubMed

    Kim, Jin Ho; Shyam, Pranab K; Kim, Mi Jeong; Lee, Hwa-Jung; Lee, Jeong Tae; Jang, Hye-Young

    2016-07-01

    In this study, 3,4,5-trisubstituted piperidines were synthesized enantioselectively, and their antioxidant activity was evaluated. The 3,4,5-trisubstituted piperidines containing TEMPO (2,2,6,6-tetramethylpiperidine-1-oxyl) and a spatially proximal hydroxy group showed good antioxidant activity. Some of these compounds showed IC50 values in a nanomolar range, comparable to that of TEMPO. Probably the TEMPO generated from the homolysis of the CON bond of 3,4,5-trisubstituted piperidines functions as a radical-scavenging entity, and the hydroxy group of piperidines has a synergistic effect to the antioxidant activity. PMID:27177825

  10. Mutagenicity of 3,4-diphenyl-5-nitrofuran analogs in Salmonella typhimurium.

    PubMed

    Ichikawa, M; Yamamoto, K; Tanaka, A; Swaminathan, S; Hatcher, J F; Erturk, E; Bryan, G T

    1986-08-01

    A new series of chemicals comprising eight different 3,4-diphenyl-substituted furan analogs, namely, methyl-3,4-diphenyl-2-furoate, methyl-3,4-diphenyl-5-nitro-2-furoate, 3,4-diphenyl-5-nitro-2-furoic acid, 3,4-diphenyl-5-nitro-2-acetylfuran, 3,4-diphenyl-5-nitro-2-bromoacetylfuran, 2-amino-4-(3,4-diphenyl-5-nitro-2-furyl)thiazole, 2-acetyl-amino-4-(3,4-diphenyl-5-nitro-2-furyl)thiazole and 2-formyl-amino-4-(3,4-diphenyl-5-nitro-2-furyl)thiazole were synthesized and their mutagenic activities tested in Salmonella typhimurium. The structure--activity relationship studies revealed that for mutagenic activity the nitro group is essential and that the potency of activity is greatly altered by the nature of the substituent at the 2-position of the furan ring. The mutagenic activities of these chemicals were generally much higher in TA100 compared to TA98. The relative order of activities for 2-substituted, 3,4-diphenyl-5-nitrofurans were COOCH3 greater than COCH2BR greater than COCH3 greater than COOH in S. typhimurium TA100. 3,4-Diphenyl-5-nitro-2-bromoacetylfuran was equally active in nitroreductase-proficient (TA98, TA100) and in nitroreductase-deficient (TA98NR, TA100NR) strains. In contrast, the acetyl and carboxymethyl ester analogs were relatively less active in nitroreductase-deficient strains. Mutagenic activities of 3,4-diphenyl-substituted furylthiazoles in comparison with the unsubstituted analogs of N-[4-(5-nitro-2-furyl)-2-thiazolyl]-formamide, N-[4-(5-nitro-2-furyl)-2-thiazolyl]-acetamide and 2-amino-4-(5-nitro-2-furyl)thiazole revealed that the phenyl groups drastically reduced their mutagenic activities. However, the relative order of activities formylamino greater than or equal to acetylamino greater than amino were the were the same between phenyl-substituted and unsubstituted analogs. PMID:3524891

  11. The Crust and Mantle Relationships Beneath Central and Southern Iberian Peninsula constrained by a 550 km long multiseismic transect

    NASA Astrophysics Data System (ADS)

    Ehsan, Siddique Akhtar; Carbonell, Ramon; Simancas, Jose Fernando; Martinez Poyatos, David; Azor, Antonio; Ayarza, Puy; Storti, Fabrizio

    2013-04-01

    A composite lithospheric cross section which is composed by data from controlled source multiseismic experiments strongly constrains the lithospheric structure of southwestern Iberia. The data includes coincident normal incidence and wide-angle profiles along an, approximately, 550 km long transect. This transect goes across, from North-to-South, the major tectonic zones that build up Southwestern part of the Iberian Peninsula (the Central Iberian Zone -CIZ-, the Ossa-Morena Zone -OMZ- and the South Portuguese Zone -SPZ-). The knowledge provided by these datasets constitutes the base to develop multidisciplinary models of the lithosphere. The multichannel deep seismic high resolution (60-90 fold) profiles, IBERSEIS & ALCUDIA were acquired in summer 2001 and 2007 are about 300 and 250 km long respectively. The transects image 20 s (TWTT), about 70 km depth. To address the crust and upper mantle structural relationships a reassessment of the normal incidence seismic reflection transect ALCUDIA has been carried out. We revised the key processing steps and applied advance analysis on the ALCUDIA transect with the aim to improve the signal to noise ratio especially in the deep parts and to produce a depth migrated image. The velocity model generated through wide-angle seismic survey (2003) was used to convert IBERSEIS time migrated stack image into depth. The new data processing flow provide better structural constraints on the shallow and deep structures as the current images reveal indentation features which strongly suggest horizontal tectonics. The ALCUDIA transect shows slightly less reflective upper crust about 13 km thick decoupled from the comparatively reflective lower crust. The reflectivity of the lower crust is continuous, high amplitude, horizontal and parallel though evidences of deformation are present as flat-ramp-flat geometry on the northeastern portion and a "Crocodile structure" wedging into the upper mantle on the southwestern portion of the ALCUDIA

  12. ASIC design in the KM3NeT detector

    NASA Astrophysics Data System (ADS)

    Gajanana, D.; Gromov, V.; Timmer, P.

    2013-02-01

    In the KM3NeT project [1], Cherenkov light from the muon interactions with transparent matter around the detector, is used to detect neutrinos. Photo multiplier tubes (PMT) used as photon sensor, are housed in a glass sphere (aka Optical Module) to detect single photons from the Cherenkov light. The PMT needs high operational voltage ( ~ 1.5 kV) and is generated by a Cockroft-Walton (CW) multiplier circuit. The electronics required to control the PMT's and collect the signals is integrated in two ASIC's namely: 1) a front-end mixed signal ASIC (PROMiS) for the readout of the PMT and 2) an analog ASIC (CoCo) to generate pulses for charging the CW circuit and to control the feedback of the CW circuit. In this article, we discuss the two integrated circuits and test results of the complete setup. PROMiS amplifies the input charge, converts it to a pulse width and delivers the information via LVDS signals. These LVDS signals carry accurate information on the Time of arrival ( < 2 ns) and Time over Threshold. A PROM block provides unique identification to the chip. The chip communicates with the control electronics via an I2C bus. This unique combination of the ASIC's results in a very cost and power efficient PMT base design.

  13. Nausea is associated with endotoxemia during a 161-km ultramarathon.

    PubMed

    Stuempfle, Kristin J; Valentino, Taylor; Hew-Butler, Tamara; Hecht, Frederick M; Hoffman, Martin D

    2016-09-01

    This study explored possible contributing factors to gastrointestinal distress, including endotoxemia, hyperthermia, dehydration and nutrition, during a 161-km ultramarathon. Thirty runners participated in the study and 20 finished the race. At three checkpoints and the finish, runners were interviewed to assess the incidence and severity of 12 gastrointestinal symptoms and to determine dietary intake. Core temperature was measured at the same locations. Runners were weighed pre-race, at the three checkpoints and the finish to monitor hydration status. Blood markers for endotoxemia (sCD14) and inflammation (interleukin-6 and C-reactive protein) were measured pre- and post-race. Gastrointestinal symptoms were experienced by most runners (80%), with nausea being the most common complaint (60%). Runners with nausea experienced significantly greater (P = 0.02) endotoxemia than those without nausea (sCD14 mean increase 0.7 versus 0.5 µg · mL(-1)). There was a significant positive correlation (r = 0.652, P = 0.005) between nausea severity and endotoxemia level. Inflammatory response, core temperature, hydration level and race diet were similar between runners with and without nausea. This study links endotoxemia to nausea in ultramarathon runners. Other possible contributing factors to nausea such as hyperthermia, dehydration and nutrition did not appear to play a role in the symptomatic runners in this study. PMID:26707127

  14. A 233 km tunnel for lepton and hadron colliders

    NASA Astrophysics Data System (ADS)

    Summers, D. J.; Cremaldi, L. M.; Datta, A.; Duraisamy, M.; Luo, T.; Lyons, G. T.

    2012-12-01

    A decade ago, a cost analysis was conducted to bore a 233 km circumference Very Large Hadron Collider (VLHC) tunnel passing through Fermilab. Here we outline implementations of e+e-, pp, and μ+μ- collider rings in this tunnel using recent technological innovations. The 240 and 500 GeV e+e- colliders employ Crab Waist Crossings, ultra low emittance damped bunches, short vertical IP focal lengths, superconducting RF, and low coercivity, grain oriented silicon steel/concrete dipoles. Some details are also provided for a high luminosity 240 GeV e+e- collider and 1.75 TeV muon accelerator in a Fermilab site filler tunnel. The 40 TeV pp collider uses the high intensity Fermilab p source, exploits high cross sections for pp production of high mass states, and uses 2 Tesla ultra low carbon steel/YBCO superconducting magnets run with liquid neon. The 35 TeV muon ring ramps the 2 Tesla superconducting magnets at 9 Hz every 0.4 seconds, uses 250 GV of superconducting RF to accelerate muons from 1.75 to 17.5 TeV in 63 orbits with 71% survival, and mitigates neutrino radiation with phase shifting, roller coaster motion in a FODO lattice.

  15. KM3NeT Digital Optical Module electronics

    NASA Astrophysics Data System (ADS)

    Real, Diego

    2016-04-01

    The KM3NeT collaboration is currently building of a neutrino telescope with a volume of several cubic kilometres at the bottom of the Mediterranean Sea. The telescope consists of a matrix of Digital Optical Modules that will detect the Cherenkov light originated by the interaction of the neutrinos in the proximity of the detector. This contribution describes the main components of the read-out electronics of the Digital Optical Module: the Power Board, which delivers all the power supply required by the Digital Optical Molule electronics; the Central Logic Board, the main core of the read-out system, hosting 31 Time to Digital Converters with 1 ns resolution and the White Rabbit protocol embedded in the Central Logic Board Field Programmable Gate Array; the Octopus boards, that transfer the Low Voltage Digital Signals from the PMT bases to the Central Logic Board and finally the PMT bases, in charge of converting the analogue signal produced in the 31 3" PMTs into a Low Voltage Digital Signal.

  16. A 233 km tunnel for lepton and hadron colliders

    SciTech Connect

    Summers, D. J.; Cremaldi, L. M.; Datta, A.; Duraisamy, M.; Luo, T.; Lyons, G. T.

    2012-12-21

    A decade ago, a cost analysis was conducted to bore a 233 km circumference Very Large Hadron Collider (VLHC) tunnel passing through Fermilab. Here we outline implementations of e{sup +}e{sup -}, pp-bar , and {mu}{sup +}{mu}{sup -} collider rings in this tunnel using recent technological innovations. The 240 and 500 GeV e{sup +}e{sup -} colliders employ Crab Waist Crossings, ultra low emittance damped bunches, short vertical IP focal lengths, superconducting RF, and low coercivity, grain oriented silicon steel/concrete dipoles. Some details are also provided for a high luminosity 240 GeV e{sup +}e{sup -} collider and 1.75 TeV muon accelerator in a Fermilab site filler tunnel. The 40 TeV pp-bar collider uses the high intensity Fermilab p-bar source, exploits high cross sections for pp-bar production of high mass states, and uses 2 Tesla ultra low carbon steel/YBCO superconducting magnets run with liquid neon. The 35 TeV muon ring ramps the 2 Tesla superconducting magnets at 9 Hz every 0.4 seconds, uses 250 GV of superconducting RF to accelerate muons from 1.75 to 17.5 TeV in 63 orbits with 71% survival, and mitigates neutrino radiation with phase shifting, roller coaster motion in a FODO lattice.

  17. Determination of the Elastic Thickness of the Crust using GOES and LIDAR images

    NASA Astrophysics Data System (ADS)

    Taghavi, Farahnaz; Ghalenoiee, Samira; Ebrahim-zadeh Ardestani, Vahid

    2016-07-01

    In this study, to identify the elastic thickness (Te) of the crust, the local variations of the coherence between Bouguer gravity and topography in the three area included Canadian Shield region, Appalachian region, and Basin and Range region are determined. We use a coherence method based on Windowed Fourier Transform (WFT) under the assumption of an isotropic lithosphere. Data sources are selected from GOES and LIDAR images for Bouguer gravity and topography, respectively. First, the coherence distribution is calculated and then, the characteristic wavelengths are obtained where the coherence is 0.5. Results show that values of the elastic thickness of the lithosphere are 110km in the Canadian Shield region, 49km in the Appalachian region and 3.5km in the Basin and Range region. The results are in good agreement with the existing values calculated from other spectral methods. Key words: Effective elastic thickness, Coherence method, Bouguer gravity anomaly, topography, satellite images.

  18. Fermion localization on thick branes

    SciTech Connect

    Melfo, Alejandra; Pantoja, Nelson; Tempo, Jose David

    2006-02-15

    We consider chiral fermion confinement in scalar thick branes, which are known to localize gravity, coupled through a Yukawa term. The conditions for the confinement and their behavior in the thin-wall limit are found for various different BPS branes, including double walls and branes interpolating between different AdS{sub 5} spacetimes. We show that only one massless chiral mode is localized in all these walls, whenever the wall thickness is keep finite. We also show that, independently of wall's thickness, chiral fermionic modes cannot be localized in dS{sub 4} walls embedded in a M{sub 5} spacetime. Finally, massive fermions in double wall spacetimes are also investigated. We find that, besides the massless chiral mode localization, these double walls support quasilocalized massive modes of both chiralities.

  19. LTCC Thick Film Process Characterization

    DOE PAGESBeta

    Girardi, M. A.; Peterson, K. A.; Vianco, P. T.

    2016-05-01

    Low temperature cofired ceramic (LTCC) technology has proven itself in military/space electronics, wireless communication, microsystems, medical and automotive electronics, and sensors. The use of LTCC for high frequency applications is appealing due to its low losses, design flexibility and packaging and integration capability. Moreover, we summarize the LTCC thick film process including some unconventional process steps such as feature machining in the unfired state and thin film definition of outer layer conductors. The LTCC thick film process was characterized to optimize process yields by focusing on these factors: 1) Print location, 2) Print thickness, 3) Drying of tapes and panels,more » 4) Shrinkage upon firing, and 5) Via topography. Statistical methods were used to analyze critical process and product characteristics in the determination towards that optimization goal.« less

  20. Applications of film thickness equations

    NASA Technical Reports Server (NTRS)

    Hamrock, B. J.; Dowson, D.

    1983-01-01

    A number of applications of elastohydrodynamic film thickness expressions were considered. The motion of a steel ball over steel surfaces presenting varying degrees of conformity was examined. The equation for minimum film thickness in elliptical conjunctions under elastohydrodynamic conditions was applied to roller and ball bearings. An involute gear was also introduced, it was again found that the elliptical conjunction expression yielded a conservative estimate of the minimum film thickness. Continuously variable-speed drives like the Perbury gear, which present truly elliptical elastohydrodynamic conjunctions, are favored increasingly in mobile and static machinery. A representative elastohydrodynamic condition for this class of machinery is considered for power transmission equipment. The possibility of elastohydrodynamic films of water or oil forming between locomotive wheels and rails is examined. The important subject of traction on the railways is attracting considerable attention in various countries at the present time. The final example of a synovial joint introduced the equation developed for isoviscous-elastic regimes of lubrication.

  1. A unique approach to accurately measure thickness in thick multilayers.

    PubMed

    Shi, Bing; Hiller, Jon M; Liu, Yuzi; Liu, Chian; Qian, Jun; Gades, Lisa; Wieczorek, Michael J; Marander, Albert T; Maser, Jorg; Assoufid, Lahsen

    2012-05-01

    X-ray optics called multilayer Laue lenses (MLLs) provide a promising path to focusing hard X-rays with high focusing efficiency at a resolution between 5 nm and 20 nm. MLLs consist of thousands of depth-graded thin layers. The thickness of each layer obeys the linear zone plate law. X-ray beamline tests have been performed on magnetron sputter-deposited WSi(2)/Si MLLs at the Advanced Photon Source/Center for Nanoscale Materials 26-ID nanoprobe beamline. However, it is still very challenging to accurately grow each layer at the designed thickness during deposition; errors introduced during thickness measurements of thousands of layers lead to inaccurate MLL structures. Here, a new metrology approach that can accurately measure thickness by introducing regular marks on the cross section of thousands of layers using a focused ion beam is reported. This new measurement method is compared with a previous method. More accurate results are obtained using the new measurement approach. PMID:22514179

  2. 3-(2-Fluoro-phen-yl)-6-(phenoxy-meth-yl)-1,2,4-triazolo[3,4-b][1,3,4]thia-diazole.

    PubMed

    Holm, Melanie; Schollmeyer, Dieter; Laufer, Stefan

    2008-01-01

    The crystal structure of the title compound, C(16)H(11)FN(4)OS, was synthesized in the course of our studies on 1,2,4-triazolo[3,4-b][1,3,4]thia-diazo-les as inhibitors of p38 mitogen-activated protein kinase (MAPK). The three-dimensional data obtained were used to generate a three-dimensional pharmacophore model for in silico database screening. The dihedral angles between the central heterocylic system and the fluoro-phenyl and phenyl rings are 20.21 (3) and 5.43 (1)°, respectively; the dihedral angle between the two benzene rings is 15.80 (4)°. PMID:21202091

  3. [Pd4(μ3-SbMe3)4(SbMe3)4]: A Pd(0) Tetrahedron with μ3-Bridging Trimethylantimony Ligands.

    PubMed

    Benjamin, Sophie L; Krämer, Tobias; Levason, William; Light, Mark E; Macgregor, Stuart A; Reid, Gillian

    2016-06-01

    The palladium(II) chlorostibine complex [PdCl2(SbMe2Cl)2]2 has a dimeric structure in the solid state, stabilized by hyper-coordination at the Lewis amphoteric Sb centers. Reaction with 8 equiv of MeLi forms [Pd4(μ3-SbMe3)4(SbMe3)4], whose structure comprises a tetrahedral Pd(0) core with four terminal SbMe3 ligands and four μ3-SbMe3 ligands, one capping each triangular Pd3 face. Density functional theory calculations, supported by energy decomposition analysis and the natural orbitals for chemical valence scheme, highlight significant donor and acceptor orbital contributions to the bonding between both the terminal and the bridging SbMe3 ligands and the Pd4 core. PMID:27200501

  4. Synthesis of 1,3,4-thiadiazole, 1,3,4-thiadiazine, 1,3,6-thiadiazepane and quinoxaline derivatives from symmetrical dithiobiureas and thioureidoethylthiourea derivatives.

    PubMed

    Hassan, Alaa A; Mourad, Aboul-Fetouh; El-Shaieb, Kamal M; Abou-Zied, Ashraf H

    2005-01-01

    Reactions of N,N;-disubstituted hydrazinecarbothioamides 8a-c and substituted thioureidoethylthioureas 9a-c with 2,3,5,6-tetrachloro-1,4-benzoquinone (chloranil, 10a) and 2,3,5,6-tetrabromo-1,4-benzoquinone (bromanil, 10b) to form N,N;-disubstituted [1,3,4]thiadiazole-2,5-diamines 11a-c, 6,7-dichloro-3-substituted amino-1H-benzo[1,3,4]- thiadiazine-5,8-diones 12a-c, 2,3,7,8-tetrahalothianthrene-1,4,6,9-tetraones 13a,b, 5,6,8- trihalo-7-oxo-3,7-dihydro-2H-quinoxaline-1-carbothioic acid substituted amides 14a-c, 15a-c and 7-substituted imino-[1,3,6]thiadiazepane-3-thiones 16a-c are reported. Rationales for the observed conversions are presented. PMID:18007352

  5. Synthesis and fluorescence properties of 1,2,4-triazolo[3,4-b]-1,3,4-thiadiazol derivatives and their terbium complexes.

    PubMed

    Zhang, Wu; Chai, Yuchao; Li, Kangyun; Chen, Yanwen; Yan, Dong; Guo, Dongcai

    2014-12-01

    Eight novel 1,2,4-triazolo[3,4-b]-1,3,4-thiadiazol derivatives have been designed and synthesized, and their corresponding Tb(3+) complexes were also prepared successfully. The fluorescence properties and fluorescence quantum yields of the target complexes were investigated, the results showed that the ligands were an efficient sensitizer for Tb(3+) luminescence, and the target complexes exhibited characteristic fluorescence emissions of Tb(3+) ion. The fluorescence intensity of the complex substituted by chlorine was stronger than that of other complexes. The substituents' nature has a great effect upon the electrochemical properties of the target complexes. The results showed that the introduction of the electron-withdrawing groups tended to decrease the oxidation potential and highest occupied molecular orbital energy levels of the target Tb(3+) complexes; however, introduction of the electron-donating groups can increase the corresponding complexes' oxidation potential and highest occupied molecular orbital energy levels. PMID:24846775

  6. Copolyimides Prepared from 3,4'-Oxydianiline and 1,3-Bis(3-Aminophenoxy) Benzene with 3,3', 4,4'-Biphenylcarboxylic Dianhydride

    NASA Technical Reports Server (NTRS)

    Jensen, Brian J. (Inventor)

    1999-01-01

    Polyimide copolymers were prepared by reacting different ratios of 3,4'-oxydianiline (ODA) and 1,3-bis(3- aminophenoxy)benzene (APB) with 3,3',4,4'- biphenylcarboxylic dianhydride (BPDA) and endcappfng with an effective amount of a non-reactive endcapper. Within a narrow ratio of diamines, from -50% ODA/50% APB to -95% ODA/5% APB, the copolyimides prepared with BPDA have a unique combination of properties that make them very attractive for various applications. This unique combination of properties includes low pressure processing (200 psi and below), long term melt stability (several hours at 390 C.), improved toughness, improved solvent resistance, improved adhesive properties, and improved composite mechanical properties.

  7. Thyroid-vitamin A interactions in Chicks exposed to 3,4,3,4-tetrachlorobiphenyl: influence of low dietary vitamin A and iodine

    SciTech Connect

    Spear, P.A.; Moon, T.W.

    1986-06-01

    Poultry chicks receiving a low vitamin A semipurified diet and exposed to 3,4,3',4'-tetrachlorobiphenyl became hypothyroid in comparison with unexposed controls. Metabolic rate, total serum thyroxine, total serum triiodothyronine, and food intake decreased significantly while thyroid weight increased. Unexpectedly, growth rate was not affected on this diet. In the case of chicks receiving a low vitamin A-low iodine semipurified diet and exposed to the PCB congener, the hypothyroid response was apparently antagonized. Comparing exposed chicks with unexposed controls, metabolic rate and the proportion of free T/sub 3/ (i.e., %T/sub 3/ resin uptake) increased while total serum thyroxine and thyroid weight were unchanged. In addition, growth rate, food consumption, and serum retinol decreased on this diet. These results are interpreted to mean that (i) growth rate may have been altered by circulating levels of retinol, and (ii) vitamin A insufficiency may predispose birds to the hypothyroid effects of PCBs.

  8. Seismic Shaking Removal of Craters 0.2-0.5 km in Diameter on Asteroid 433 Eros

    NASA Technical Reports Server (NTRS)

    Thomas, P. C.; Robinson, M. S.

    2005-01-01

    Impact cratering acts in a variety of ways to create a surprising range of scenery on small satellites and asteroids. The visible crater population is a self-modifying characteristic of these airless objects, and determining the various ways younger craters can add or subtract from the population is an important aspect of small body "geology." Asteroid 433 Eros, the most closely studied of any small body, has two aspects of its crater population that have attracted attention: a fall-off of crater densities below approx.100 m diameter relative to an expected equilibrium population [1] and regions of substantially lower large crater densities [2, 3, 4]. In this work we examine the global variation of the density of craters on Eros larger than 0.177 km, a size range above that involved in small crater depletion hypotheses [1, 5]. We counted all craters on Eros to a size range somewhat below 0.177 km diameter (and different from data used in [3]). The primary metric for this study is the number of craters between 0.177 and 1.0 km within a set radius of each grid point on the 2deg x 2deg shape model of Eros. This number can be expressed as an R-value [6], provided that it is remembered that the large bin size makes individual R values slightly different from those obtained in the usual root-2 bins.

  9. 3/4 VIEW OF PORT SIDE ELEVATION LOOKING AFT. FIREFIGHTING EQUIPMENT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3/4 VIEW OF PORT SIDE ELEVATION LOOKING AFT. FIREFIGHTING EQUIPMENT CAN BE SEEN ON DECK. WATER INTAKE PORTS ARE LOCATED AMIDSHIP UNDER THE WATERLINE. - Fireboat JOHN J. HARVEY, Pier 63, North River, New York County, NY

  10. 3/4 view of exterior looking northeast from street. The church ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3/4 view of exterior looking northeast from street. The church is at the right of the view and the rectory is at the left. - Our Lady of Good Voyage Church, 142 Prospect Street, Gloucester, Essex County, MA

  11. 2. 3/4 view looking SW showing threeroll can mill, reduction ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    2. 3/4 view looking SW showing three-roll can mill, reduction gear, flywheel with steam engine in background. - Hacienda Azucarera la Igualdad, Sugar Mill Ruins & Steam Engine, PR Route 332, Guanica, Guanica Municipio, PR

  12. Exterior 3/4 view of north and west sides of la ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Exterior 3/4 view of north and west sides of la casa, showing entrance to first story, view towards the south. - Pou Coffee Processing Structure, Casa No. 2, Highway 139, Kilometer 12, Maraguez, Ponce Municipio, PR

  13. Framing detail at stern. 3/4 view looking aft towards stern ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Framing detail at stern. 3/4 view looking aft towards stern logs, lifts, horn timber, framing and ceiling planks. Rudder shaft on horn timber. - Purse Seiner SHENANDOAH, Gig Harbor Peninsula Historical Society and Museum, Gig Harbor, Pierce County, WA

  14. 3/4 view of old rain shed (Building No. 43) showing ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3/4 view of old rain shed (Building No. 43) showing southwest corner with open bays. - Hawaii Volcanoes National Park Water Collection System, Hawaii Volcanoes National Park, Volcano, Hawaii County, HI

  15. 3/4 view of old rain shed (Building No. 43) showing ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3/4 view of old rain shed (Building No. 43) showing northwest corner with corrugated siding. - Hawaii Volcanoes National Park Water Collection System, Hawaii Volcanoes National Park, Volcano, Hawaii County, HI

  16. 43 CFR 4750.3-4 - Approval or disapproval of applications.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... CONTROL OF WILD FREE-ROAMING HORSES AND BURROS Private Maintenance § 4750.3-4 Approval or disapproval of... to select the appropriate number, sex, age and species of animals from those available. If...

  17. 43 CFR 4750.3-4 - Approval or disapproval of applications.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... CONTROL OF WILD FREE-ROAMING HORSES AND BURROS Private Maintenance § 4750.3-4 Approval or disapproval of... to select the appropriate number, sex, age and species of animals from those available. If...

  18. 43 CFR 4750.3-4 - Approval or disapproval of applications.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... CONTROL OF WILD FREE-ROAMING HORSES AND BURROS Private Maintenance § 4750.3-4 Approval or disapproval of... to select the appropriate number, sex, age and species of animals from those available. If...

  19. 43 CFR 4750.3-4 - Approval or disapproval of applications.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... CONTROL OF WILD FREE-ROAMING HORSES AND BURROS Private Maintenance § 4750.3-4 Approval or disapproval of... to select the appropriate number, sex, age and species of animals from those available. If...

  20. 1,3,4-Oxadiazole Derivatives. Optical Properties in Pure and Mixed Solvents.

    PubMed

    Homocianu, Mihaela; Airinei, Anton

    2016-09-01

    1,3,4-Oxadiazole derivatives-organic materials are an interesting and continuously developing area of research. This review describes some optical properties and highlights the current applications of these compounds in biomedical and optoelectronic fields. The relationships between polymer structures, environmental factors and optical properties (absorption and fluorescence) of several selected and relevant l,3,4-oxadiazole-containing molecules were presented in this review. These aspects were analyzed in various pure solvents and microheterogeneous media (mixed solvents). Also, the selectivity and sensitivity of some 1,3,4-oxadiazole derivatives-organic materials for different metal ions were discussed and evaluated by using spectral techniques. Finally, some important photophysical characteristics of 34 series of organic materials containing -1,3,4-oxadiazole rings, were collected in a table. PMID:27324952

  1. 12. Building H9; 3/4 view, looking SE; showing relationship of ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    12. Building H-9; 3/4 view, looking SE; showing relationship of blast barricade to building. (Ryan and Harms) - Holston Army Ammunition Plant, RDX-and-Composition-B Manufacturing Line 9, Kingsport, Sullivan County, TN

  2. 14. Building 09; 3/4 view, looking NE; showing relationship of ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    14. Building 0-9; 3/4 view, looking NE; showing relationship of blast barricades to building. (Ryan) - Holston Army Ammunition Plant, RDX-and-Composition-B Manufacturing Line 9, Kingsport, Sullivan County, TN

  3. 2. Building D9; 3/4 view, looking NE; showing relationship of ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    2. Building D-9; 3/4 view, looking NE; showing relationship of reactor leg to building proper. (Ryan) - Holston Army Ammunition Plant, RDX-and-Composition-B Manufacturing Line 9, Kingsport, Sullivan County, TN

  4. 11. Building H9; 3/4 view, looking NW; showing relationship of ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    11. Building H-9; 3/4 view, looking NW; showing relationship of wheeling ramp to building. (Ryan and Harms) - Holston Army Ammunition Plant, RDX-and-Composition-B Manufacturing Line 9, Kingsport, Sullivan County, TN

  5. 3/4 view of elliptical stern looking forward along starboard side ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3/4 view of elliptical stern looking forward along starboard side - horizontal composition with Mike Vlahovich working on deck. - Purse Seiner SHENANDOAH, Gig Harbor Peninsula Historical Society and Museum, Gig Harbor, Pierce County, WA

  6. 1. 3/4 view of N & W elevations, showing relationship ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. 3/4 view of N & W elevations, showing relationship to Building 140 at right; looking SE. - Rock Island Arsenal, Building No. 139, Second Street between Ramsey Street & South Avenue, Rock Island, Rock Island County, IL

  7. 2. 3/4 view of N & W elevations, W wing; ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    2. 3/4 view of N & W elevations, W wing; North elevation of Building 75 (the kitchen); looking SE. (Ceronie) - Rock Island Arsenal, Building No. 60, Rodman Avenue between Gillespie Avenue & First Street, Rock Island, Rock Island County, IL

  8. Four-Component Bicyclization Approaches to Skeletally Diverse Pyrazolo[3,4-b]pyridine Derivatives

    PubMed Central

    2015-01-01

    A novel four-component bicyclization strategy has been established, allowing a flexible and practical approach to 37 examples of multicyclic pyrazolo[3,4-b]pyridines from low-cost and readily accessible arylglyoxals, pyrazol-5-amines, aromatic amines, 4-hydroxy-6-methyl-2H-pyran-2-one, and cyclohexane-1,3-diones. The polysubstituted cyclopenta[d]pyrazolo[3,4-b]pyridines were stereoselectively synthesized through a microwave-assisted special [3+2+1]/[3+2] bicyclization with good control of the spatial configuration of exocyclic double bonds. The novel [3+2+1]/[2+2+1] bicyclization resulted in 17 examples of unreported pyrazolo[3,4-b]pyrrolo[4,3,2-de]quinolones. Reasonable mechanisms for forming two new types of multicyclic pyrazolo[3,4-b]pyridines are also proposed. PMID:25338160

  9. Cratering and penetration experiments in teflon targets at velocities from 1 to 7 km/s

    NASA Technical Reports Server (NTRS)

    Horz, Friedrich; Cintala, Mark; Bernhard, Ronald P.; Cardenas, Frank; Davidson, William; Haynes, Gerald; See, Thomas H.; Winkler, Jerry; Knight, Jeffrey

    1994-01-01

    Approximately 20 sq m of protective thermal blankets, largely composed of Teflon, were retrieved from the Long Duration Exposure Facility after the spacecraft spent approximately 5.7 years in space. Examination of these blankets revealed that they contained thousands of hypervelocity impact features ranging from micron-sized craters to penetration holes several millimeters in diameter. We conducted impact experiments to reproduce such features and to understand the relationships between projectile size and the resulting crater or penetration hole diameter over a wide range of impact velocities. Such relationships are needed to derive the size and mass frequency distribution and flux of natural and man-made particles in low-earth orbit. Powder propellant and light-gas guns were used to launch soda-lime glass spheres into pure Teflon targets at velocities ranging from 1 to 7 km/s. Target thickness varied over more than three orders of magnitude from finite halfspace targets to very thin films. Cratering and penetration of massive Teflon targets is dominated by brittle failure and the development of extensive spall zones at the target's front and, if penetrated, the target's rear side. Mass removal by spallation at the back side of Teflon targets may be so severe that the absolute penetration hole diameter can become larger than that of a standard crater. The crater diameter in infinite halfspace Teflon targets increases, at otherwise constant impact conditions, with encounter velocity by a factor of V (exp 0.44). In contrast, the penetration hole size in very thin foils is essentially unaffected by impact velocity. Penetrations at target thicknesses intermediate to these extremes will scale with variable exponents of V. Our experimental matrix is sufficiently systematic and complete, up to 7 km/s, to make reasonable recommendations for velocity-scaling of Teflon craters and penetrations. We specifically suggest that cratering behavior and associated equations apply

  10. Process for the preparation of 3,4-dihydroxybutanoic acid and salts thereof

    DOEpatents

    Hollingsworth, Rawle I.

    1994-01-01

    A process for the preparation of 3,4-dihydroxybutanoic acid (1) and salts thereof from a glucose source containing 1,4-linked glucose as a substituent is described. The process uses an alkali metal hdyroxide and hydrogen peroxide to convert the glucose source to (1). The compound (1) is useful as a chemical intermediate to naturally occurring fatty acids and is used to prepare 3,4-dihydroxybutanoic acid-gamma-lactone (2) and furanone (3), particularly stereoisomers of these compounds.

  11. Process For The Preparation Of 3,4-Dihyd Roxybutanoic Acid And Salts Thereof

    DOEpatents

    Hollingsworth, Rawle I.

    1994-06-07

    A process for the preparation of 3,4-dihydroxybutanoic acid (1) and salts thereof from a glucose source containing 1,4-linked glucose as a substituent is described. The process uses an alkali metal hdyroxide and hydrogen peroxide to convert the glucose source to (1). The compound (1) is useful as a chemical intermediate to naturally occurring fatty acids and is used to prepare 3,4-dihydroxybutanoic acid-gamma-lactone (2) and furanone (3), particularly stereoisomers of these compounds.

  12. Novel action of 3,4-DAA ameliorating acute liver allograft injury.

    PubMed

    Sun, Qing-Feng; Ding, Ji-Guang; Sheng, Ji-Fang; Zhu, Man-Hua; Li, Jun-Jie; Sheng, Zi-Ke; Tang, Xiao-Feng

    2011-12-01

    The anti-allergic drug, N-(3,4-dimethoxycinnamonyl) anthranilic acid (3,4-DAA), is a synthetic anthranilic acid derivative that has been used therapeutically in Japan for many years. In this study, to investigate the effects of 3,4-DAA in allograft immunorejection model, liver orthotopic transplants were performed using inbred male Dark Agouti donors and Lewis rat recipients (allografts). The levels of indoleamine 2,3-dioxygenases (IDO) enzymic activities in five groups, allografts (control), dimethyl sulphoxide-treated group (vehicle control), 200 mg·kg(-1) ·day(-1) of 3,4-DAA-treated group and 200 mg·kg(-1) ·day(-1) of 3,4-DAA + 5 mg·ml(-1) of 1-methyl-D-tryptophan (1-MT)-treated group were confirmed by determination of L-kynurenine (L-Kyn) concentrations. The serum alanine aminotransferase levels in 3,4-DAA-treated rats significantly decreased compared with those in mock and control group, whereas treatment of 1-MT in allografts led to the opposite effect. Administration of 3,4-DAA reduced histological severity of allograft immunorejection, decreased serum levels of cytokines tumour necrosis factor-alpha (TNF-α) and interferon-gamma (IFN-γ), and raised serum levels of interleukin-10 (IL-10), suggesting that 3,4-DAA has both anti-inflammatory and anti-immunorejection properties through IDO in immune regulation and may therefore be useful in filling an unmet need, in the treatment of allograft immunorejection. PMID:21932299

  13. Syntheses, spectral, X-ray and DFT studies of 5-benzyl-N-phenyl-1,3,4-thiadiazol-2-amine, 2-(5-phenyl-1,3,4-thiadiazol-2-yl) pyridine and 2-(5-methyl-1,3,4-thiadiazole-2-ylthio)-5-methyl-1,3,4-thiadiazole obtained by Mn(II) catalyzed reactions

    NASA Astrophysics Data System (ADS)

    Dani, R. K.; Bharty, M. K.; Kushawaha, S. K.; Paswan, S.; Prakash, Om; Singh, Ranjan K.; Singh, N. K.

    2013-12-01

    New compounds 5-benzyl-N-phenyl-1,3,4-thiadiazol-2-amine (Bptha, 1), 2-(5-phenyl-1,3,4-thiadiazol-2-yl) pyridine (Pthp, 2) and 2-(5-methyl-1,3,4-thiadiazole-2-ylthio)-5-methyl-1,3,4-thiadiazole (Mtmth, 3) have been synthesized and characterized with the aid of elemental analyses, IR, NMR and single crystal X-ray data. The structure of compounds 1, 2 and 3 are stabilized via intramolecular as well as intermolecular hydrogen bonding and crystallize in monoclinic system with space group P 1, P21/n and P 1, respectively. During the course of reaction, the substituted thiosemicarbazide/thiohydrazide get cyclized into the corresponding thiadiazole in the presence of manganese(II) nitrate via loss of H2O to yield compounds 1 and 2. However condensation occurred in the case of 5-methyl-1,3,4-thiadiazole-2-thiol which yielded 2-(5-methyl-1,3,4-thiadiazole-2-ylthio)-5-methyl-1,3,4-thiadiazole (3) by loss of one mole of H2S from two moles of 5-methyl-1,3,4-thiadiazole-2-thiol in the presence of manganese(II) acetate. The geometry optimization has been performed using DFT method and geometrical parameters thus obtained for the compounds have been compared with their single crystal X-ray data. The negative values of HOMO and LUMO energies for the molecules indicate that they are stable. The electronic transition from the ground state to the excited state due to a transfer of electrons from the HOMO to LUMO levels is mainly associated with the π⋯π transition.

  14. New 3,4-seco-ent-kaurene dimers from Croton micans.

    PubMed

    Mateu, Elsa; Chavez, Katiuska; Riina, Ricarda; Compagnone, Reinaldo S; Delle Monache, Franco; Suárez, Alírica I

    2012-01-01

    From the stems of Croton micans Sw., five new 3,4-seco-ent-kaurene dimers: micansinoic acid (1), isomicansinoic acid (2), and the dimethyl (3), monomethyl (4) and monoethyl ester (5) of micansinoic acid were isolated. The structures of the new compounds were elucidated by spectroscopic data interpretation, mainly 1D and 2D NMR experiments and MS. These compounds are the first 3,4-seco-ent-kaurene dimers from a Croton species. PMID:22428229

  15. Implementation experiences of NASTRAN on CDC CYBER 74 SCOPE 3.4 operating system

    NASA Technical Reports Server (NTRS)

    Go, J. C.; Hill, R. G.

    1973-01-01

    The implementation of the NASTRAN system on the CDC CYBER 74 SCOPE 3.4 Operating System is described. The flexibility of the NASTRAN system made it possible to accomplish the change with no major problems. Various sizes of benchmark and test problems, ranging from two hours to less than one minute CP time were run on the CDC CYBER SCOPE 3.3, Univac EXEC-8, and CDC CYBER SCOPE 3.4. The NASTRAN installation deck is provided.

  16. Kinematics of the New Zealand plate boundary: Relative motion by GPS across networks of 1000 km and 50 km spacing

    NASA Technical Reports Server (NTRS)

    Meertens, Charles M.; Rocken, Christian; Perin, Barbara; Walcott, Richard

    1993-01-01

    The NASA/DOSE 'Kinematics of the New Zealand Plate Boundary' experiment is a four-year cooperative Global Positioning System (GPS) experiment involving 6 universities and institutions in New Zealand and the United States. The investigation covers two scales, the first on the scale of plates (approximately 1000 km) and the second is on the scale of the plate boundary zone (approximately 50 km). In the first portion of the experiment, phase A, the objective is to make direct measurements of tectonic plate motion between the Australian and Pacific plates using GPS in order to determine the Euler vector of this plate pair. The phase A portion of this experiment was initiated in December 1992 with the first-epoch baseline measurements on the large scale network. The network will be resurveyed two years later to obtain velocities. The stations which were observed for phase A are shown and listed. Additional regional stations which will be used for this study are listed and are part of either CIGNET or other global tracking networks. The phase A portion of the experiment is primarily the responsibility of the UNAVCO investigators. Therefore, this report concentrates on phase A. The first year of NASA funding for phase A included only support for the field work. Processing and analysis will take place with the second year of funding. The second part of the experiemnt measured relative motion between the Australian and Pacific plates across the pate boundary zone between Hokitika and Christchurch on the South Island of New Zealand. The extent and rate of deformation will be determined by comparisons with historical, conventional surveys and by repeated GPS measurements to be made in two years. This activity was the emphasis of the LDGO portion of the study. An ancillary experiment, phase C, concentrated on plate boundary deformation in the vicinity of Wellington and was done as part of training during the early portion of the field campaign. Details of the objectives of the

  17. File Specification for the 7-km GEOS-5 Nature Run, Ganymed Release Non-Hydrostatic 7-km Global Mesoscale Simulation

    NASA Technical Reports Server (NTRS)

    da Silva, Arlindo M.; Putman, William; Nattala, J.

    2014-01-01

    This document describes the gridded output files produced by a two-year global, non-hydrostatic mesoscale simulation for the period 2005-2006 produced with the non-hydrostatic version of GEOS-5 Atmospheric Global Climate Model (AGCM). In addition to standard meteorological parameters (wind, temperature, moisture, surface pressure), this simulation includes 15 aerosol tracers (dust, sea-salt, sulfate, black and organic carbon), O3, CO and CO2. This model simulation is driven by prescribed sea-surface temperature and sea-ice, daily volcanic and biomass burning emissions, as well as high-resolution inventories of anthropogenic sources. A description of the GEOS-5 model configuration used for this simulation can be found in Putman et al. (2014). The simulation is performed at a horizontal resolution of 7 km using a cubed-sphere horizontal grid with 72 vertical levels, extending up to to 0.01 hPa (approximately 80 km). For user convenience, all data products are generated on two logically rectangular longitude-latitude grids: a full-resolution 0.0625 deg grid that approximately matches the native cubed-sphere resolution, and another 0.5 deg reduced-resolution grid. The majority of the full-resolution data products are instantaneous with some fields being time-averaged. The reduced-resolution datasets are mostly time-averaged, with some fields being instantaneous. Hourly data intervals are used for the reduced-resolution datasets, while 30-minute intervals are used for the full-resolution products. All full-resolution output is on the model's native 72-layer hybrid sigma-pressure vertical grid, while the reduced-resolution output is given on native vertical levels and on 48 pressure surfaces extending up to 0.02 hPa. Section 4 presents additional details on horizontal and vertical grids. Information of the model surface representation can be found in Appendix B. The GEOS-5 product is organized into file collections that are described in detail in Appendix C. Additional

  18. A high resolution (1 km) groundwater model for Indonesia

    NASA Astrophysics Data System (ADS)

    Sutanudjaja, Edwin; Verkaik, Jarno; de Graaf, Inge; van Beek, Rens; Erkens, Gilles; Bierkens, Marc

    2015-04-01

    Groundwater is important in many parts of Indonesia. It serves as a primary source of drinking water and industrial activities. During times of drought, it sustains water flows in streams, rivers, lakes and wetlands, and thus support ecosystem habitat and biodiversity as well as preventing hazardous forest fire. Besides its importance, groundwater is known as a vulnerable resource as unsustainable groundwater exploitation and management occurs in many areas of the country. Therefore, in order to ensure sustainable management of groundwater resources, monitoring and predicting groundwater changes in Indonesia are imperative. However, large extent groundwater models to assess these changes on a regional scale are almost non-existent and are hampered by the strong topographical and lithological transitions that characterize Indonesia. In this study, we built an 1 km resolution groundwater model for the entire Indonesian archipelago (total inland area: about 2 million km2). We adopted the approaches of Sutanudjaja et al. (2011, 2014a) and de Graaf et al. (2014) in order to make a MODFLOW (Harbaugh et al., 2000) groundwater model by using only global datasets. Aquifer schematization and properties of the groundwater model were developed from available global lithological maps (e.g. Dürr et al., 2005; Gleeson et al., 2011; Hartmann & Moorsdorf, 2012; Gleeson et al., 2014). We forced the groundwater model with the recent output of global hydrological model PCR-GLOBWB version 2.0 (Sutanudjaja et al., 2014b; van Beek et al., 2011), specifically the long term average of groundwater recharge and average surface water levels derived from channel discharge. Simulation results were promising. The MODFLOW model converged with realistic aquifer properties (i.e. transmissivities) and produced reasonable groundwater head spatial distribution reflecting the positions of major groundwater bodies and surface water bodies in the country. In Vienna, we aim to show and demonstrate these

  19. Novel Variants of Oct-3/4 Gene Expressed in Mouse Somatic Cells*S⃞

    PubMed Central

    Mizuno, Nobuhiko; Kosaka, Mitsuko

    2008-01-01

    It has been suggested that Oct-3/4 may regulate self-renewal in somatic stem cells, as it does in embryonic stem cells. However, recent reports raise the possibility that detection of human Oct-3/4 expression by RT-PCR is prone to artifacts generated by pseudogene transcripts and argue against a role for Oct-3/4 in somatic cells. In this study, we clarified Oct-3/4 expression in mouse somatic tissues using designed PCR primers, which can exclude amplification of its pseudogenes. We found that novel alternative transcripts are indeed expressed in somatic tissues, rather than the normal length transcripts in germline and ES cells. The alternative transcripts indicate the expression of two kinds of truncated proteins. Furthermore, we determined novel promoter regions that are sufficient for the expression of Oct-3/4 transcript variants in somatic cells. These findings provide new insights into the postnatal role of Oct-3/4 in somatic tissues. PMID:18765667

  20. Radioluminescence properties of Ce 3+-activated MGd(PO 3) 4 (M = Li, Na, K, Cs)

    NASA Astrophysics Data System (ADS)

    Zhong, Jiuping; Liang, Hongbin; Su, Qiang; Zhou, Jianying; Khodyuk, Ivan V.; Dorenbos, Pieter

    2009-12-01

    Rare-earth phosphates MGd(PO 3) 4:1.0 mol% Ce 3+ (M = Li, Na, K, Cs) powder samples were prepared by a solid-state reaction technique at high temperature. The radioluminescence spectra and light-yield characteristic of MGd(PO 3) 4:Ce 3+ under X-ray irradiation were determined. It was found that, from LiGd(PO 3) 4:Ce 3+ to CsGd(PO 3) 4:Ce 3+, with the increasing of M + radius, the doublet emission energy of Ce 3+ ions decrease gradually but the light-yield increase significantly. Especially, CsGd(PO 3) 4:1.0 mol% Ce 3+ has the highest X-ray excited light-yield of 24,400 photons/MeV with maximal emission peaks at 337 nm and 358 nm at room temperature. Due to its suitable emission wavelength range, high light-yield, high chemical stability and fast luminescence decay of Ce 3+ emission, CsGd(PO 3) 4:Ce 3+ may be a promising scintillation material.

  1. Estimation of Land Surface Temperature from 1-km AVHRR data

    NASA Astrophysics Data System (ADS)

    Frey, Corinne

    2016-04-01

    In order to re-process DLRs 1km AVHRR data archive to different geophysical and descriptive parameters of the land surface and the atmosphere, a series of scientific data processors are being developed in the framework of the TIMELINE project. The archive of DLR ranges back to the 80ies. One of the data processors is SurfTemp, which processes L2 LST and emissivity datasets from AVHRR L1b data. The development of the data processor included the selection of statistical procedures suitable for time series processing, including four mono-window and six split window algorithms. For almost all of these algorithms, new constants were generated, which better account for different atmospheric and geometric acquisition situations. The selection of optimal algorithms for SurfTemp is based on a round robin approach, in which the selected mono-window and split window algorithms are tested on the basis of a large number of TOA radiance/LST pairs, which were generated using a radiative transfer model and the SeeBorV5 profile database. The original LSTs are thereby compared to the LSTs derived from the TOA radiances using the mono- and split window algorithms. The algorithm comparison includes measures of precision, as well as the sensitivity of a method to the accuracy of its input data. The results of the round robin are presented, as well as the implementation of selected algorithms into SurfTemp. Further, first cross-validation results between the AVHRR LST and MODIS LST are shown.

  2. Gastrointestinal distress is common during a 161-km ultramarathon.

    PubMed

    Stuempfle, Kristin Jean; Hoffman, Martin Dean

    2015-01-01

    This study examined the incidence, severity, and timing of gastrointestinal (GI) symptoms in finishers and non-finishers of the 161-km Western States Endurance Run. A total of 272 runners (71.0% of starters) completed a post-race questionnaire that assessed the incidence and severity (none = 0, mild = 1, moderate = 2, severe = 3, very severe = 4) of 12 upper (reflux/heartburn, belching, stomach bloating, stomach cramps/pain, nausea, vomiting) and lower (intestinal cramps/pain, flatulence, side ache/stitch, urge to defecate, loose stool/diarrhoea, intestinal bleeding/bloody faeces) GI symptoms experienced during each of four race segments. GI symptoms were experienced by most runners (96.0%). Flatulence (65.9% frequency, mean value 1.0, s = 0.6 severity), belching (61.3% frequency, mean value 1.0, s = 0.6 severity), and nausea (60.3% frequency, mean value 1.0, s = 0.7 severity) were the most common symptoms. Among race finishers, 43.9% reported that GI symptoms affected their race performance, with nausea being the most common symptom (86.0%). Among race non-finishers, 35.6% reported that GI symptoms were a reason for dropping out of the race, with nausea being the most common symptom (90.5%). For both finishers and non-finishers, nausea was greatest during the most challenging and hottest part of the race. GI symptoms are very common during ultramarathon running, and in particular, nausea is the most common complaint for finishers and non-finishers. PMID:25716739

  3. Processing techniques for global land 1-km AVHRR data

    USGS Publications Warehouse

    Eidenshink, Jeffery C.; Steinwand, Daniel R.; Wivell, Charles E.; Hollaren, Douglas M.; Meyer, David

    1993-01-01

    The U.S. Geological Survey's (USGS) Earth Resources Observation Systems (EROS) Data Center (EDC) in cooperation with several international science organizations has developed techniques for processing daily Advanced Very High Resolution Radiometer (AVHRR) 1-km data of the entire global land surface. These techniques include orbital stitching, geometric rectification, radiometric calibration, and atmospheric correction. An orbital stitching algorithm was developed to combine consecutive observations acquired along an orbit by ground receiving stations into contiguous half-orbital segments. The geometric rectification process uses an AVHRR satellite model that contains modules for forward mapping, forward terrain correction, and inverse mapping with terrain correction. The correction is accomplished by using the hydrologic features coastlines and lakes from the Digital Chart of the World. These features are rasterized into the satellite projection and are matched to the AVHRR imagery using binary edge correlation techniques. The resulting coefficients are related to six attitude correction parameters: roll, roll rate, pitch, pitch rate, yaw, and altitude. The image can then be precision corrected to a variety of map projections and user-selected image frames. Because the AVHRR lacks onboard calibration for the optical wavelengths, a series of time-variant calibration coefficients derived from vicarious calibration methods and are used to model the degradation profile of the instruments. Reducing atmospheric effects on AVHRR data is important. A method has been develop that will remove the effects of molecular scattering and absorption from clear sky observations, using climatological measurements of ozone. Other methods to remove the effects of water vapor and aerosols are being investigated.

  4. Seismotectonics and Crustal Thickness of Northwest Mindoro, Philippines

    NASA Astrophysics Data System (ADS)

    Chen, P. F.; Olavere, E. A.; Lee, K. M.; Bautista, B.; Solidum, R., Jr.; Huang, B. S.

    2015-12-01

    Mindoro Island locates where the Palawan Continental Block (PCB) indented into the Philippine Mobile Belt (PMB) during the Early Miocene and where the Manila Trench terminates, having ceased convergence due to collision. On the transition from subduction to collision, Northwest Mindoro exhibits vigorous seismic activity and has been debated about its affiliation being PCB or PMB. Here, we use data from both the EHB and Global Centroid Moment Tensor catalogues to study the regional seismotectonics. We also deployed five broadband stations to probe the crustal thickness beneath NW Mindoro using receiver function analysis. Results show that, following the southeasterly reduction of convergence rates at the southern termination of the Manila Trench, the slab dipping angles steepen, were initiated at depth (~200 km) and propagate upwards. The horizontal distances of the trench and slab, as measured from the Wadati-Benioff zone at 200 km depth, also reduce in a southeasterly direction. Observations of intermediate-depth earthquakes that exhibit predominantly down-dip extensional stress patterns attest that the steepening of slab dipping angles is due to the negative buoyancy of the slab. Preliminary results of receiver function analysis suggest that the crustal thickness beneath NW Mindoro is about 40 km and is probably PCB affiliated.

  5. Response of mantle transition zone thickness to plume buoyancy flux

    NASA Astrophysics Data System (ADS)

    Das Sharma, S.; Ramesh, D. S.; Li, X.; Yuan, X.; Sreenivas, B.; Kind, R.

    2010-01-01

    The debate concerning thermal plumes in the Earth's mantle, their geophysical detection and depth characterization remains contentious. Available geophysical, petrological and geochemical evidence is at variance regarding the very existence of mantle plumes. Utilizing P-to-S converted seismic waves (P receiver functions) from the 410 and 660 km discontinuities, we investigate disposition of these boundaries beneath a number of prominent hotspot regions. The thickness of the mantle transition zone (MTZ), measured as P660s-P410s differential times (tMTZ), is determined. Our analyses suggest that the MTZ thickness beneath some hotspots correlates with the plume strength. The relationship between tMTZ, in response to the thermal perturbation, and the strength of plumes, as buoyancy flux B, follows a power law. This B-tMTZ behavior provides unprecedented insights into the relation of buoyancy flux and excess temperature at 410-660 km depth below hotspots. We find that the strongest hotspots, which are located in the Pacific, are indeed plumes originating at the MTZ or deeper. According to the detected power law, even the strongest plumes may not shrink the transition zone by significantly more than ~40 km (corresponding to a maximum of 300-400° excess temperature).

  6. Eddy current thickness measurement apparatus

    DOEpatents

    Rosen, Gary J.; Sinclair, Frank; Soskov, Alexander; Buff, James S.

    2015-06-16

    A sheet of a material is disposed in a melt of the material. The sheet is formed using a cooling plate in one instance. An exciting coil and sensing coil are positioned downstream of the cooling plate. The exciting coil and sensing coil use eddy currents to determine a thickness of the solid sheet on top of the melt.

  7. K--Ar dating, geological and paleomagnetic study of a 5-KM lava succession in northern Iceland

    SciTech Connect

    Saemundsson, K.; Kristjansson, L.; McDougall, I.; Watkins, N.D.

    1980-07-10

    A 5-km section of basalt lavas exposed at Troellaskagi on the western flank of the Eyjafjoerdur structural dome in northern Iceland has been subjected to K--Ar age and paleomagnetic analysis from which detailed results are tabulated (34 dated lavas, 455 paleomagnetic directions). The upper 4 km of the sequence was erupted between about 11 and 9 m.y. ago. The rate of growth of the lava pile changed about 9.5 m.y. ago. Growth rates in the lower part were of the order of 1 km/m.y., whereas growth rates in the upper part may have been as high as 4 km/m.y. A 1.8 km-thick normal polarity interval in the middle part of the section is correlated with marine magnetic anomaly 5. A good match is observed between the polarity sequence of the Troellaskagi section and the marine magnetic polarity pattern above and below anamaly 5. Regression analysis of the K-Ar data gives an age of 10.5 m.y. for the older boundary of anomaly 5 but a questionable o.3-m.y. age for its younger limit. Structural characteristics of the lava pile indicate that eruption of the sequence was associated with a now extinct rift axis in the western part of northern Iceland. Low-lattice virtual poles are more prevalent in this survey than in two comparable recent surveys on younger Icelandic lavas and much more common than may be expected from a Fisherian distribution. There is no evidence to confirm that such transitional poles are predominantly due to nondipole fields. No significant difference was found in overall strength or stability between normal and reverse geomagnetic fields, as recorded in over 1000 lava flows in Iceland.

  8. Thick resist for MEMS processing

    NASA Astrophysics Data System (ADS)

    Brown, Joe; Hamel, Clifford

    2001-11-01

    The need for technical innovation is always present in today's economy. Microfabrication methods have evolved in support of the demand for smaller and faster integrated circuits with price performance improvements always in the scope of the manufacturing design engineer. The dispersion of processing technology spans well beyond IC fabrication today with batch fabrication and wafer scale processing lending advantages to MEMES applications from biotechnology to consumer electronics from oil exploration to aerospace. Today the demand for innovative processing techniques that enable technology is apparent where only a few years ago appeared too costly or not reliable. In high volume applications where yield and cost improvements are measured in fractions of a percent it is imperative to have process technologies that produce consistent results. Only a few years ago thick resist coatings were limited to thickness less than 20 microns. Factors such as uniformity, edge bead and multiple coatings made high volume production impossible. New developments in photoresist formulation combined with advanced coating equipment techniques that closely controls process parameters have enable thick photoresist coatings of 70 microns with acceptable uniformity and edge bead in one pass. Packaging of microelectronic and micromechanical devices is often a significant cost factor and a reliability issue for high volume low cost production. Technologies such as flip- chip assembly provide a solution for cost and reliability improvements over wire bond techniques. The processing for such technology demands dimensional control and presents a significant cost savings if it were compatible with mainstream technologies. Thick photoresist layers, with good sidewall control would allow wafer-bumping technologies to penetrate the barriers to yield and production where costs for technology are the overriding issue. Single pass processing is paramount to the manufacturability of packaging

  9. Modeling Li-ion conductivity in LiLa(PO3)4 powder

    NASA Astrophysics Data System (ADS)

    Mounir, Ferhi; Karima, Horchani-Naifer; Khaled, Ben Saad; Mokhtar, Férid

    2012-07-01

    Polycrystalline powder and single-crystal of LiLa(PO3)4 are synthesized by solid state reaction and flux technique, respectively. A morphological description of the obtained product was made based on scanning electron microscopy micrographs. The obtained powder was characterized by X-ray powder diffraction, FTIR and Raman spectroscopies. Ionic conductivity of the LiLa(PO3)4 powder was measured and evaluated over a temperature range from 553 to 913 K. Single crystals of LiLa(PO3)4 are characterized by single-crystal X-ray diffraction. The LiLa(PO3)4 structure was found to be isotypic with LiNd(PO3)4. It crystallizes in the monoclinic system with space group C2/c and cell parameters: a=16.635(6) Å, b=7.130(3) Å, c=9.913(3) Å, β=126.37(4)°, V=946.72(6) Å3 and Z=4. The LiLa(PO3)4 structure was described as an alternation between spiraling chains (PO3)n and (La3+, Li+) cations along the b direction. The small Li+ ions, coordinated to four oxygen atoms, were located in the large connected cavities created between the LaO8 polyhedra and the polyphosphate chains. The jumping of Li+ through tunnels of the crystalline network was investigated using complex impedance spectroscopy. The close value of the activation energies calculated through the analysis of conductivity data and loss spectra indicate that the transport in the investigated system is through hopping mechanism. The correlation between ionic conductivity of LiLa(PO3)4 and its crystallographic structure was investigated and the most probably transport pathway model was determined.

  10. Is inositol (1,3,4,5)-tetrakisphosphate a new second messenger

    SciTech Connect

    Hansen, C.A.; Williamson, J.R.

    1986-05-01

    Hormone-stimulated hydrolysis of inositol (Ins) lipids results in the rapid formation of Ins(1,4,5)P/sub 3/, the second messenger for intracellular Ca/sup 2 +/ mobilization. Recently, a more polar inositol phosphate, Ins(1,3,4,5)P/sub 4/ as well as its probable hydrolysis product Ins(1,3,4)P/sub 3/ have been reported to accumulate in carbachol-stimulated brain slices. Vasopressin addition to hepatocytes prelabeled with (/sup 3/H)-Ins also showed a rapid increase of Ins(1,3,4,5)P/sub 4/, which was similar to that of Ins(1,4,5)P/sub 3/, while the accumulation of Ins(1,3,4)P/sub 3/ was slower. In order to examine whether Ins(1,3,4,5)P/sub 4/ has any functional effects on Ca/sup 2 +/ homeostasis, it was synthesized enzymatically from (/sup 3/H)-Ins(1,4,5)P/sub 3/ using a partially purified phosphoinositol kinase activity from rat brain cortex. (/sup 3/H)-labeled inositol phosphates were separated by anion exchange chromatography and analyzed by HPLC using ammonium formate/phosphoric acid gradient elution. Preliminary experiments indicate that Ins(1,3,4,5)P/sub 4/ up to 10 ..mu..M does not release Ca/sup 2 +/ from vesicular pools in saponin-permeabilized hepatocytes. It has a slight inhibitory effect on Ins(1,4,5)P/sub 3/-induced Ca/sup 2 +/ release. The effect of Ins(1,3,4,5)P/sub 4/ on plasma membrane Ca/sup 2 +/ fluxes are presently being investigated.

  11. Platelet activating factor antagonist design. 2. X-ray structure of dimethyl 2,3,4,5-tetrahydro-5 beta-(3,4-methylenedioxyphenyl)-2-oxo-3 beta-(3,4,5-trimethoxybenzoyl)-3 alpha,4 alpha-furandicarboxylate.

    PubMed

    Peterson, J R; Do, H D; Rogers, R D

    1989-07-15

    C25H24O12, Mr = 516.46, triclinic, P-1, a = 8.780 (3), b = 11.298 (4), c = 13.271 (6) A, alpha = 71.77 (4), beta = 70.31 (3), gamma = 72.66 (3) degrees, V = 1189 A3, Z = 2, Dx = 1.44 g cm-3, lambda (Mo K alpha) = 0.71073 A, mu = 0.74 cm-1, F(000) = 540, T = 293 K, final R = 0.046 for 2495 observed [Fo greater than or equal to 5 sigma (Fo)] reflections. The observed structure reveals a trans disposition for the methoxycarbonyl and aryl substituents at positions 4 and 5 of the heterocycle and a cis-3,4-bis(methoxycarbonyl) relationship. There is no crystallographically imposed symmetry. Several intermolecular van der Waals interactions occur in the cell lattice of this compound. PMID:2610989

  12. Using a New Crustal Thickness Model to Test Previous Candidate Lunar Basins and to Search for New Candidates

    NASA Technical Reports Server (NTRS)

    Meyer, H. M.; Frey, H. V.

    2012-01-01

    A new crustal thickness model was used to test the viability of 110 candidate large lunar basins previously identified using older topographic and crustal thickness data as well as photogeologic data. The new model was also used to search for new candidate lunar basins greater than 300 km in diameter. We eliminated 11 of 27 candidates previously identified in the older crustal thickness model, and found strong evidence for at least 8 new candidates.

  13. Constraining the thickness of Europa's water-ice shell: Insights from tidal dissipation and conductive cooling

    NASA Astrophysics Data System (ADS)

    Quick, Lynnae C.; Marsh, Bruce D.

    2015-06-01

    The time of crystallization of a 100 km thick ocean on Europa is estimated using a Stefan-style solidification solution. This solution is then extended to estimate the present thickness of the ice shell. It is assumed that the shell is initially in a steady-state conductive regime, and the ocean is taken to be an infinite liquid half space cooling from above. We find that in the absence of tidal heating and without the presence of low-eutectic impurities to serve as anti-freezes, a 100 km thick ocean solidifies in about 64 Myr. Conversely, when considering the present thickness of Europa's ice shell, if tidal heating is included at a global dissipation rate of ∼1 TW, the shell is found to be, on average, approximately 28 km thick. However, if this dissipative heating is solely restricted to the shell, the local rate of heating may vary significantly due to crustal compositional heterogeneities and it is shown that this process may, in turn, produce thermal maxima in the crust, which could lead to local melting and structural instabilities, perhaps associated with the formation of chaos regions. Our approach is also extended to Ganymede and Callisto in order to estimate the time of solidification of their putative subsurface oceans and the current thicknesses of their ice-I shells.

  14. Phosphatidylinositol-3,4,5-Triphosphate and Cellular Signaling: Implications for Obesity and Diabetes

    PubMed Central

    Manna, Prasenjit; Jain, Sushil K.

    2015-01-01

    Phosphatidylinositol-3,4,5-triphosphate (PtdIns(3,4,5)P3) is one of the most important phosphoinositides and is capable of activating a wide range of proteins through its interaction with their specific binding domains. Localization and activation of these effector proteins regulate a number of cellular functions, including cell survival, proliferation, cytoskeletal rearrangement, intracellular vesicle trafficking, and cell metabolism. Phosphoinositides have been investigated as an important agonist-dependent second messenger in the regulation of diverse physiological events depending upon the phosphorylation status of their inositol group. Dysregulation in formation as well as metabolism of phosphoinositides is associated with various pathophysiological disorders such as inflammation, allergy, cardiovascular diseases, cancer, and metabolic diseases. Recent studies have demonstrated that the impaired metabolism of PtdIns(3,4,5)P3 is a prime mediator of insulin resistance associated with various metabolic diseases including obesity and diabetes. This review examines the current status of the role of PtdIns(3,4,5)P3 signaling in the regulation of various cellular functions and the implications of dysregulated PtdIns(3,4,5)P3 signaling in obesity, diabetes, and their associated complications. PMID:25721445

  15. Quantifying Uncertainties in Tephra Thickness and Volume Estimates

    NASA Astrophysics Data System (ADS)

    Engwell, S. L.; Aspinall, W.; Sparks, R. S.

    2013-12-01

    Characterization of explosive volcanic eruptive processes from interpretations of deposits is a key to assessing long-term volcanic hazards and risks, particularly for large explosive eruptions which occur relatively infrequently and others whose deposits, particularly distal deposits, are transient in the geological record. Whilst eruption size - determined by measurement and interpretation of tephra fall deposits - is of particular importance, uncertainties for such measurements and volume estimates are rarely presented. In this study, we quantify the main sources of variance in determining tephra volume from thickness measurements and isopachs in terms of number and spatial distribution of such measurements, using the Fogo A deposit, São Miguel, Azores as an example. Analysis of Fogo A fall deposits show measurement uncertainties are approximately 9 % of measured thickness while uncertainty associated with natural deposit variability ranges between 10 % and 40 % of average thickness, with an average variation of 30 %. Correlations between measurement uncertainties and natural deposit variability are complex and depend on a unit's thickness, position within a succession and distance from source and local topography. The degree to which thickness measurement errors impact on volume uncertainty depends on the number of measurements in a given dataset and their associated individual uncertainties. For Fogo A, the consequent uncertainty in volume associated with thickness measurement uncertainty is 1.3 %, equivalent to a volume uncertainty of 1.5 × 0.02 km3. Uncertainties also arise in producing isopach maps: the spatial relationships between source location and different deposit thicknesses are described by contours subjectively drawn to encompass measurements of a given thickness, generally by eye. Recent advances in volume estimation techniques involve the application of mathematical models directly to tephra thickness data. Here, uncertainties in tephra volumes

  16. Focusing of relative plate motion at a continental transform fault: Cenozoic dextral displacement >700 km on New Zealand's Alpine Fault, reversing >225 km of Late Cretaceous sinistral motion

    NASA Astrophysics Data System (ADS)

    Lamb, Simon; Mortimer, Nick; Smith, Euan; Turner, Gillian

    2016-03-01

    The widely accepted ˜450 km Cenozoic dextral strike-slip displacement on New Zealand's Alpine Fault is large for continental strike-slip faults, but it is still less than 60% of the Cenozoic relative plate motion between the Australian and Pacific plates through Zealandia, with the remaining motion assumed to be taken up by rotation and displacement on other faults in a zone up to 300 km wide. We show here that the 450 km total displacement across the Alpine Fault is an artifact of assumptions about the geometry of New Zealand's basement terranes in the Eocene, and the actual Cenozoic dextral displacement across the active trace is greater than 665 km, with more than 700 km (and <785 km since 25 Ma) occurring in a narrow zone less than 10 km wide. This way, the Alpine Fault has accommodated almost all (>94%) of the relative plate motion in the last 25 Ma at an average rate in excess of 28 mm/yr. It reverses more than 225 km (and <300 km) of sinistral shear through Zealandia in the Late Cretaceous, when Zealandia lay on the margin of Gondwana, providing a direct constraint on the kinematics of extension between East and West Antarctica at this time.

  17. Accurate thickness measurement of graphene

    NASA Astrophysics Data System (ADS)

    Shearer, Cameron J.; Slattery, Ashley D.; Stapleton, Andrew J.; Shapter, Joseph G.; Gibson, Christopher T.

    2016-03-01

    Graphene has emerged as a material with a vast variety of applications. The electronic, optical and mechanical properties of graphene are strongly influenced by the number of layers present in a sample. As a result, the dimensional characterization of graphene films is crucial, especially with the continued development of new synthesis methods and applications. A number of techniques exist to determine the thickness of graphene films including optical contrast, Raman scattering and scanning probe microscopy techniques. Atomic force microscopy (AFM), in particular, is used extensively since it provides three-dimensional images that enable the measurement of the lateral dimensions of graphene films as well as the thickness, and by extension the number of layers present. However, in the literature AFM has proven to be inaccurate with a wide range of measured values for single layer graphene thickness reported (between 0.4 and 1.7 nm). This discrepancy has been attributed to tip-surface interactions, image feedback settings and surface chemistry. In this work, we use standard and carbon nanotube modified AFM probes and a relatively new AFM imaging mode known as PeakForce tapping mode to establish a protocol that will allow users to accurately determine the thickness of graphene films. In particular, the error in measuring the first layer is reduced from 0.1-1.3 nm to 0.1-0.3 nm. Furthermore, in the process we establish that the graphene-substrate adsorbate layer and imaging force, in particular the pressure the tip exerts on the surface, are crucial components in the accurate measurement of graphene using AFM. These findings can be applied to other 2D materials.

  18. Preparation of thick molybdenum targets

    NASA Technical Reports Server (NTRS)

    Singh, J. J.

    1974-01-01

    Thick natural molybdenum deposits on nickel plated copper substrates were prepared by thermal decomposition of molybdenum hexacarbonyl vapors on a heated surface in an inert gas atmosphere. The molybdenum metal atoms are firmly bonded to the substrate atoms, thus providing an excellent thermal contact across the junction. Molybdenum targets thus prepared should be useful for internal bombardment in a cyclotron where thermal energy inputs can exceed 10 kW.

  19. Soliton models for thick branes

    NASA Astrophysics Data System (ADS)

    Peyravi, Marzieh; Riazi, Nematollah; Lobo, Francisco S. N.

    2016-05-01

    In this work, we present new soliton solutions for thick branes in 4+1 dimensions. In particular, we consider brane models based on the sine-Gordon (SG), φ 4 and φ 6 scalar fields, which have broken Z2 symmetry in some cases and are responsible for supporting and stabilizing the thick branes. The origin of the symmetry breaking in these models resides in the fact that the modified scalar field potential may have non-degenerate vacua. These vacua determine the cosmological constant on both sides of the brane. We also study the geodesic equations along the fifth dimension, in order to explore the particle motion in the neighborhood of the brane. Furthermore, we examine the stability of the thick branes, by determining the sign of the w^2 term in the expansion of the potential for the resulting Schrödinger-like equation, where w is the five-dimensional coordinate. It turns out that the φ ^4 brane is stable, while there are unstable modes for certain ranges of the model parameters in the SG and φ ^6 branes.

  20. Central Corneal Thickness in Children

    PubMed Central

    2011-01-01

    Objective To report the central corneal thickness (CCT) in healthy white, African-American, and Hispanic children from birth to 17 years of age. Design Prospective observational multicenter study. Central corneal thickness was measured with a hand-held contact pachymeter. Results Two thousand seventy-nine children were included in the study, with ages ranging from day of birth to 17 years. Included were 807 white, 494 Hispanic, and 474 African-American individuals, in addition to Asian, unknown and mixed race individuals. African-American children had thinner corneas on average than that of both white (p< .001) and Hispanic children (p< .001) by approximately 20 micrometers. Thicker median CCT was observed with each successive year of age from age 1 to 11 years, with year-to-year differences steadily decreasing and reaching a plateau after age 11 at 573 micrometers in white and Hispanic children and 551 micrometers in African-American children. For every 100 micrometers of thicker CCT measured, the intraocular pressure was 1.5 mmHg higher on average (p< 0.001). For every diopter of increased myopic refractive error (p< 0.001) CCT was 1 micrometer thinner on average. Conclusions Median CCT increases with age from 1 to 11 years with the greatest increase present in the youngest age groups. African-American children on average have thinner central corneas than white and Hispanic children, while white and Hispanic children demonstrate similar central corneal thickness. PMID:21911662

  1. Synthesis and anticancer evaluation of 1,3,4-oxadiazoles, 1,3,4-thiadiazoles, 1,2,4-triazoles and Mannich bases.

    PubMed

    Megally Abdo, Nadia Youssef; Kamel, Mona Monir

    2015-01-01

    A series of 5-(pyridin-4-yl)-N-substituted-1,3,4-oxadiazol-2-amines (3a-d), 5-(pyridin-4-yl)-N-substituted-1,3,4-thiadiazol-2-amines (4a-d) and 5-(pyridin-4-yl)-4-substituted-1,2,4-triazole-3-thiones (5a-d) were obtained by the cyclization of hydrazinecarbothioamide derivatives 2a-d derived from isonicotinic acid hydrazide. Aminoalkylation of compounds 5a-d with formaldehyde and various secondary amines furnished the Mannich bases 6a-p. The structures of the newly synthesized compounds were confirmed on the basis of their spectral data and elemental analyses. All the compounds were screened for their in vitro anticancer activity against six human cancer cell lines and normal fibroblast cells. Sixteen of the tested compounds exhibited significant cytotoxicity against most cell lines. Among these derivatives, the Mannich bases 6j, 6m and 6p were found to exhibit the most potent activity. The Mannich base 6m showed more potent cytotoxic activity against gastric cancer NUGC (IC50=0.021 µM) than the standard CHS 828 (IC50=0.025 µM). Normal fibroblast cells WI38 were affected to a much lesser extent (IC50>10 µM). PMID:25948330

  2. Synthesis and antimicrobial evaluation of novel 4-amino-6-(1,3,4-oxadiazolo/1,3,4-thiadiazolo)-pyrimidine derivatives.

    PubMed

    Shetty, Poornima; Praveen, B M; Raghavendra, M; Manjunath, K; Cheruku, Srinivas

    2016-05-01

    A series of novel 4-amino-6-(1,3,4-oxadiazolo/1,3,4-thiadiazolo)-pyrimidine derivatives of biological interest were prepared by sequential amination, hydrazide formation, and hydrazine carbothioamidination followed by cyclization. All the synthesized compounds (6a-6h and 7a-7f) were screened for antibacterial and antifungal activity. From this group, compound 7f (MIC (μg/mL μg/mL )/Inhibition (mm): 6.25/23-30) showed good antibacterial and antifungal activity. Reagents and conditions: (a) Ethyl acetoacetate, 60% NaH, 1,4-dioxane, 60°C, 6 h; (b) DIPEA, 1,4-dioxane, 100°C, 14 h; (c) NH2NH2 ⋅ H2O, EtOH, reflux, 14 h; (d) Tolyl isothiocyanatobenzene, DMF, RT, 2 h; (e) (if X = O) EDC⋅ HCl, TEA, DMF, RT, 14 h; (f) (if X = S) Conc. H2O4, RT, 14h. PMID:26498121

  3. Homology modeling and QSAR analysis of 1,3,4-thiadiazole and 1,3,4-triazole derivatives as carbonic anhydrase inhibitors.

    PubMed

    Akula, N V Murali Krishna; Kumar, Surendra; Singh, Vineet; Tiwari, Meena

    2010-08-01

    Carbonic anhydrase (CA) inhibitors are very interesting target for designing anticancer (hypoxic) and antiglaucoma drugs. In the present study, a 3D homology modeling of human carbonic anhydrase-IX (hCA-IX) isozyme, based upon the crystal structure of murine CA-XIVA (PDB CODE 1RJ5) was performed, as no experimental 3D structures are available. A homology model of hCA-IX was developed and validated. To explore the responsible physicochemical properties of 1,3,4-thiadiazole and 1,3,4-triazole derivatives for carbonic anhydrase inhibition, a quantitative structure activity relationship (QSAR) study was performed having hCA-II and hCA-IX inhibitory activity respectively. In hCA-II and hCA-IX inhibitory activities, four significant models with good correlations (> or = 0.945 & > or = 0.926) were obtained; two models (models 1 and 3) were selected based on statistical criterion. The QSAR study revealed that in case of hCA-II, overall increase in size and volume of molecule, introduction of electropositive surfaces might increase the inhibitory activity, whereas in case of hCA-IX, decreasing the hydrophobicity and introduction of electron releasing substituents might increase the hCA-IX inhibitory activity. PMID:21174951

  4. Tin(IV) tetrahalide complexes of 2-amino-1,3,4-thiadiazole and 2-ethylamino-1,3,4-thiadiazole

    NASA Astrophysics Data System (ADS)

    Benedetti, Adriano; Fabretti, Antonio C.; Peyronel, Giorgio; Zanoli, Aline F.

    The following tin(IV) tetrahalide complexes of 2-amino-1,3,4-thiadiazole ( atz, L) and 2-ethylamino-1,3,4-thiadiazole ( eatz, L') have been prepared and investigated by i.r. and Raman spectroscopy: SnCl 4L 1.5, SnBr 4L 1.5, SnBr 4L 4, SnI 4L 3, SnI 4L 6, SnCl 4L' 1.33, SnCl 4L' 2.25·CH 2Cl 2, SnBr 4L' 2, SnBr 4L' 3, SnBr 4L' 5, SnI 4L' 5. The ligands are bonded through the aminic nitrogen atom with ν(SnN) bands in the 555-385 and 520-355 cm -1 regions for the atz and eatz complexes, respectively. In some complexes some bridging ligand molecules may be bonded also through a ring-nitrogen atom. For the first four eatz-complexes a cis-configuration may be established.

  5. Microbial Hydroxylation of 5-Anilino-1,2,3,4-Thiatriazole

    PubMed Central

    Theriault, Robert J.; Longfield, Thomas H.

    1973-01-01

    Two hundred eighty-five fungi, including 100 basidiomycetes and 35 yeasts, 75 actinomycetes, and 40 bacteria were screened for their ability to convert 5-anilino-1,2,3,4-thiatriazole (AT) to 5-(p-hydroxyanilino)-1,2,3,4-thiatriazole (p-HT). Eleven cultures were found that formed p-HT, which was isolated and whose structure was determined. Aspergillus tamarii NRRL 3280 formed 8.6 g of p-HT/liter from 10 g of AT/liter (78.9% conversion) in shaken flasks and 4.57 g of p-HT/liter from 6 g of AT/liter (69.8% conversion) in 30-liter fermentors. Washed cells of A. tamarii NRRL 3280 also carried out this conversion. 5-(o-hydroxyanilino)-1,2,3,4-thiatriazole (o-HT) was identified as a second product formed by Aspergillus terreus NRRL 1960. PMID:4699219

  6. Luminescent lanthanide coordination polymers synthesized via in-situ hydrolysis of dimethyl-3,4-furandicarboxylate

    NASA Astrophysics Data System (ADS)

    Greig, Natalie E.; Einkauf, Jeffrey D.; Clark, Jessica M.; Corcoran, Eric J.; Karram, Joseph P.; Kent, Charles A.; Eugene, Vadine E.; Chan, Benny C.; de Lill, Daniel T.

    2015-05-01

    Dimethyl-3,4-furandicarboxylate undergoes hydrolysis under hydrothermal conditions with lanthanide (Ln) ions to form two-dimensional coordination polymers, [Ln(C6H2O5)(C6H3O5)(H2O)]n (Ln=Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu). The resulting materials exhibit luminescent properties with quantum yields and lifetimes for the Eu(III) and Tb(III) compounds of 1.1±0.3% and 0.387±0.0001 ms, and 3.3±0.8% and 0.769±0.006 ms, respectively. Energy values for the singlet and triplet states were determined for dimethyl-3,4-furandicarboxylate and 3,4-furandicarboxylic acid. Excited state dynamics and structural features are examined to explicate the reported quantum yields. A series of other FDC structures is briefly presented.

  7. Metabolites of 1,2,3,4-tetrachlorobenzene in monkey urine

    SciTech Connect

    Schwartz, H.; Chu, I.; Villeneuve, D.C.; Viau, A.; Benoit, F.M.

    1985-01-01

    (/sup 14/C(U))-Labeled 1,2,3,4-tetrachlorobenzene was administered orally to squirrel monkeys. Urine was collected from these animals, pooled and analyzed for metabolites by thin-layer chromatography, high-performance liquid chromatography, and gas chromatography-mass spectroscopy. N-Acetyl-s(2,3,4,5-tetrachlorophenyl) cysteine was shown to be the major metabolite and accounted for 85% of the radioactivity found in urine. A minor metabolite was identified at 2,3,4,5-tetrachlorophenol. This study demonstrates for the first time that an N-acetyl cysteine conjugate has been isolated and identified as metabolite of a chlorinated benzene. This pattern of chlorobenzene metabolism is significantly different from the one obtained with the rat and rabbit, where tetrachlorophenols constitute the major metabolites.

  8. Molecular control of PtdIns(3,4,5)P3 signaling in neutrophils

    PubMed Central

    Luo, Hongbo R; Mondal, Subhanjan

    2015-01-01

    Neutrophils play critical roles in innate immunity and host defense. However, excessive neutrophil accumulation or hyper-responsiveness of neutrophils can be detrimental to the host system. Thus, the response of neutrophils to inflammatory stimuli needs to be tightly controlled. Many cellular processes in neutrophils are mediated by localized formation of an inositol phospholipid, phosphatidylinositol (3,4,5)-trisphosphate (PtdIns(3,4,5)P3), at the plasma membrane. The PtdIns(3,4,5)P3 signaling pathway is negatively regulated by lipid phosphatases and inositol phosphates, which consequently play a critical role in controlling neutrophil function and would be expected to act as ideal therapeutic targets for enhancing or suppressing innate immune responses. Here, we comprehensively review current understanding about the action of lipid phosphatases and inositol phosphates in the control of neutrophil function in infection and inflammation. PMID:25576302

  9. Measuring Metal Thickness With an Electric Probe

    NASA Technical Reports Server (NTRS)

    Shumka, A.

    1986-01-01

    Thickness of metal parts measured from one side with aid of Kelvin probe. Method developed for measuring thickness of end plate on sealed metal bellows from outside. Suitable for thicknesses of few thousandth's of inch (few hundred micrometers). Method also used to determine thickness of metal coatings applied by sputtering, electroplating, and flame spraying.

  10. Measuring Rind Thickness on Polyurethane Foam

    NASA Technical Reports Server (NTRS)

    Johnson, C.; Miller, J.; Brown, H.

    1985-01-01

    Nondestructive test determines rind thickness of polyurethane foam. Surface harness of foam measured by Shore durometer method: hardness on Shore D scale correlates well with rind thickness. Shore D hardness of 20, for example, indicates rind thickness of 0.04 inch (1 millimeter). New hardness test makes it easy to determine rind thickness of sample nondestructively and to adjust fabrication variables accordingly.

  11. Effect of Varying Crustal Thickness on CHAMP Geopotential Data

    NASA Technical Reports Server (NTRS)

    Taylor, P. T.; Kis, K. I.; vonFrese, R. R. B.; Korhonen, J. V.; Wittmann, G.; Kim, H. R.; Potts, L. V.

    2003-01-01

    To determine the effect of crustal thickness variation on satellite-altitude geopotential anomalies we compared two regions of Europe with vastly different values, Central/Southern Finland and the Pannonian Basin. Crustal thickness exceeds 62 km in Finland and is less than 26 km in the Pannonian Basin. Heat-flow maps indicate that the thinner and more active crust of the Pannonian Basin has a value nearly three times that of the Finnish Svecofennian Province. Ground based gravity mapping in Hungary shows that the free-air gravity anomalies across the Pannonian Basin are near 0 to +20 mGal with shorter wavelength anomalies from +40 to less than +60 mGal and some 0 to greater than -20 mGal. Larger anomalies are detected in the mountainous areas. The minor value anomalies can indicate the isostatic equilibrium for Hungary (the central part of the Pannonian Basin). Gravity data over Finland are complicated by de-glaciation. CHAMP gravity data (400 km) indicates a west-east positive gradient of greater than 4 mGal across Central/Southern Finland and an ovoid positive anomaly (approximately 4 mGal) quasi-coincidental with the magnetic anomaly traversing the Pannonian Basin. CHAMP magnetic data (425 km) reveal elongated semicircular negative anomalies for both regions with South-Central Finland having larger amplitude (less than -6 nT) than that over the Pannonian Basin, Hungary (less than -5 nT). In both regions subducted oceanic lithosphere has been proposed as the anomalous body.

  12. Arctic sea ice volume and thickness: trends and observations

    NASA Astrophysics Data System (ADS)

    Kwok, Ronald

    The sea ice extent of the Northern Hemisphere has been declining at an average rate of ˜3% per decade over the satellite record (1978-present) and the summer decline seems to be accelerating (Comiso et al., 2008). In September 2007, the summer ice extent reached a record minimum of 4.2×106 km2, which was 1.6×106 km2 or 23% less than the previous record set in September 2005. The loss of old ice is occurring at an even higher rate of ˜10% per decade. In addition to these remarkable trends in summer ice coverage, combined submarine and satellite records show a parallel thinning of the central Arctic ice cover from a winter thickness of 3.64 m in 1980 to only 1.89 m by 2008, a net decrease of 1.75 m or 48% in thickness (Kwok and Rothrock, 2009). More than two-thirds of the Arctic is now covered by thinner seasonal ice. If current rates persist, both trajectories point to the potential of ice-free summers in the not too distant future. Recent thickness observations from ICESat-1 have also provided a short record of the total sea ice volume of the Arctic Ocean -an important indicator of the state of the sea ice system. However, sustaining a capability to construct a long-term climate record of thickness and volume is a challenge. At this writing, ICESat-1 is near the end of its mission life and CryoSat-2 is about to be launched. CryoSat-2 is designed to have a mission life of 3 years that would likely end prior to launch of ICESat-II in ˜2015. Cross-calibration of the ICESat and CryoSat-2 (and eventually ICESat-II) ice thickness estimates is needed for linking the two data sets to extend the record of the seasonal, interannual, and decadal trends in thickness and volume. This is crucial for understanding the trends, process studies, as well as for improvement of long-term climate projections. Through this decade, there will be gaps in observations that need to be bridged with airborne assets augmented perhaps other new approaches to measure sea ice thickness. In

  13. Nitrative DNA damage and Oct3/4 expression in urinary bladder cancer with Schistosomahaematobium infection

    SciTech Connect

    Ma, Ning; Thanan, Raynoo; Kobayashi, Hatasu; Hammam, Olfat; Wishahi, Mohamed; Leithy, Tarek El; Hiraku, Yusuke; Amro, EL-Karef; Oikawa, Shinji; Ohnishi, Shiho; Murata, Mariko; Kawanishi, Shosuke

    2011-10-22

    Highlights: {yields} Oct3/4-positive cells increase in Schistosoma haematobium (SH)-associated bladder cancer. {yields} iNOS-dependent DNA lesion, 8-nitroguanine, was formed in Oct3/4-positive cells. {yields} 8-Nitroguanine formed in stem-like cells plays a role in SH-induced carcinogenesis. {yields} Mutant stem cells may participate in inflammation-related carcinogenesis. -- Abstract: To investigate whether mutant stem cells participate in inflammation-related carcinogenesis, we performed immunohistochemical analysis to examine nitrative and oxidative DNA lesions (8-nitroguanine and 8-oxodG) and a stem cell marker Oct3/4 in bladder tissues obtained from cystitis and bladder cancer patients infected with Schistosomahaematobium (S. haematobium). We also detected the expression of nuclear factor-{kappa}B (NF-{kappa}B) and inducible nitric oxide synthase (iNOS), which lead to 8-nitroguanine formation. The staining intensity of 8-nitroguanine and 8-oxodG was significantly higher in bladder cancer and cystitis tissues than in normal tissues. iNOS expression was colocalized with NF-{kappa}B in 8-nitroguanine-positive tumor cells from bladder cancer patients. Oct3/4 expression was significantly increased in cells from S. haematobium-associated bladder cancer tissues in comparison to normal bladder and cancer tissues without infection. Oct3/4 was also expressed in epithelial cells of cystitis patients. Moreover, 8-nitroguanine was formed in Oct3/4-positive stem cells in S. haematobium-associated cystitis and cancer tissues. In conclusion, inflammation by S.haematobium infection may increase the number of mutant stem cells, in which iNOS-dependent DNA damage occurs via NF-{kappa}B activation, leading to tumor development.

  14. Formation of Mud Volcanoes, Giant Polygons and Chaotic Terrains on Mars as the Result of Compaction and Convection of Thick Altered Pyroclastic Deposit

    NASA Astrophysics Data System (ADS)

    Lopez, T.; Baratoux, D.; Antoine, R.; Rabinowicz, M.; Le Deit, L.; Kurita, K.; D'Uston, L.

    2013-12-01

    Rheology of crustal material is a key parameter to understand surface morphology on solid planets. Detections of phyllosilicate-rich units on Mars, made by OMEGA and CRISM instruments, over a major part of the Southern Plains [1] and in some specific regions as ejectas and craters central peaks in the Northern Plains [2], suggest a widespread extend of phyllosicate-rich deposits. Analysis of recent experimental characterization of the rheology of phyllosilicates leads us to propose a link between several types of surface features on Mars and the hydrodynamic instabilities that may develop in such material. More precisely, we propose and argue that the formation of mud volcanoes, giant polygons and chaotic terrains results from the interplay of compaction, hydrothermal convection and plastic convection in thick phyllosilicate-rich units. Indeed, the compaction and hydrothermal convection that may develop in the 4° tilted sedimentary layers in Firsoff crater [3] would lead to the formation of a top light-layered deposit intruded by mud volcanoes. In the same way, compaction coupled with hydrothermal and plastic convection in the 2.5 km thick sediment cover of Utopia [4] and Acidalia Planitiae can explain the formation of the giant polygons and their associated set of mud volcanoes. Besides, strong plastic and hydrothermal convection coupled with compaction acting in the 5 km thick cover of Hydraotes Chaos would explain the formation of (i) the kilometre deep troughs separating the polygonal mesas recorded there, and (ii) the km large pitted mud cones paving these troughs. Finally, we obtain new insights into the sub-surface structure prevailing to the formation of outflow channels. Indeed, we propose the formation of a network of connected deconsolidated clays tubes would provide the necessary hydrological connectivity that eventually led to the major outflow events. [1] e.g. Ehlmann et al., 2013, Spa. Sci. Rev., 174 (1-4); [2] Carter et al., 2010, Science, 328

  15. Decameter thick remnant glacial ice deposits on Mars

    NASA Astrophysics Data System (ADS)

    Conway, Susan J.; Balme, Matthew R.

    2014-08-01

    On Mars, a smooth, draping unit—the "latitude-dependant mantle" (LDM), believed to comprise meter thick layers of dust and ice—extends from the midlatitudes to the poles, covering at least 23% of the surface. We show that the LDM can be 30 m deep on pole-facing crater walls, and by measuring the erosional and depositional volumes of small gullies that incise these LDM deposits, we show that it must contain between 46% and 95% ice by volume. Extrapolating to a global scale, these deposits account for ~104 km3 of near-surface ice, doubling previous LDM volume estimates. Thick LDM deposits can be emplaced during the many orbital variation-driven climate excursions that occurred during the Amazonian period. We suggest that LDM deposits are similar to ice sheets composed of massive ice with a surface lag.

  16. 3.4-Billion-year-old biogenic pyrites from Barberton, South Africa: sulfur isotope evidence

    NASA Technical Reports Server (NTRS)

    Ohmoto, H.; Kakegawa, T.; Lowe, D. R.

    1993-01-01

    Laser ablation mass spectroscopy analyses of sulfur isotopic compositions of microscopic-sized grains of pyrite that formed about 3.4 billion years ago in the Barberton Greenstone Belt, South Africa, show that the pyrite formed by bacterial reduction of seawater sulfate. These data imply that by about 3.4 billion years ago sulfate-reducing bacteria had become active, the oceans were rich in sulfate, and the atmosphere contained appreciable amounts (>>10(-13) of the present atmospheric level) of free oxygen.

  17. 3.4-Billion-year-old biogenic pyrites from Barberton, South Africa: sulfur isotope evidence.

    PubMed

    Ohmoto, H; Kakegawa, T; Lowe, D R

    1993-10-22

    Laser ablation mass spectroscopy analyses of sulfur isotopic compositions of microscopic-sized grains of pyrite that formed about 3.4 billion years ago in the Barberton Greenstone Belt, South Africa, show that the pyrite formed by bacterial reduction of seawater sulfate. These data imply that by about 3.4 billion years ago sulfate-reducing bacteria had become active, the oceans were rich in sulfate, and the atmosphere contained appreciable amounts (>10(-13) of the present atmospheric level) of free oxygen. PMID:11539502

  18. 3/4 inch scale sections and details. San Bernardino Valley Union ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3/4 inch scale sections and details. San Bernardino Valley Union Junior College, Auditorium Building. Cornice and corbels; cement exterior grilles; wood interior grilles; ceiling beams; exterior wall section. G. Stanley Wilson, Architect, A.I.A., Riverside, California. Sheet 10, job no. 692. Scale 3/4 inch to the foot. March 27, 1936. Application no. 1446, approved by the State of California, Department of Public Works, Division of Architecture, April 22, 1936. - San Bernardino Valley College, Auditorium, 701 South Mount Vernon Avenue, San Bernardino, San Bernardino County, CA

  19. 3/4 inch scale detail auditorium ceiling. San Bernardino Valley Union ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3/4 inch scale detail auditorium ceiling. San Bernardino Valley Union Junior College, Auditorium Building. Section and plan of center part of ceiling. G. Stanley Wilson, Architect, A.I.A., Riverside California. Sheet 11, job no. 692. Scale 3/4 inch to the foot. March 27, 1936. Application no. 1446, approved by the State of California, Department of Public Works, Division of Architecture, April 22, 1936. - San Bernardino Valley College, Auditorium, 701 South Mount Vernon Avenue, San Bernardino, San Bernardino County, CA

  20. Organocatalytic Doubly Annulative Approach to 3,4-Dihydrocoumarins Bearing a Fused Pyrrolidine Scaffold.

    PubMed

    Kowalczyk, Dorota; Albrecht, Łukasz

    2016-08-01

    A new strategy for the highly enantio- and diastereoselective synthesis of 3,4-dihydrocoumarin derivatives bearing a fused pyrrolidine ring is reported. It is based on a Brønsted base catalyzed cascade reactivity between β,γ-unsaturated-α-ketophosphonates and imines (derived from various salicylaldehydes and diethyl aminomalonate). The approach can be described as a doubly annulative strategy where both the pyrrolidine moiety and the δ-lactone ring of the 3,4-dihydrocoumarin framework are constructed starting from acyclic precursors. PMID:27351069

  1. Microwave-Assisted Piloty-Robinson Synthesis of 3,4-Disubstituted Pyrroles

    PubMed Central

    Milgram, Benjamin C.; Eskildsen, Katrine; Richter, Steven M.; Scheidt, W. Robert; Scheidt, Karl A.

    2007-01-01

    The synthesis of N-acyl 3,4-disubstituted pyrroles can be accomplished directly from hydrazine and an aldehyde via a Piloty-Robinson pyrrole synthesis. The use of microwave radiation for the cyclization and pyrrole formation greatly reduces the time necessary for this process and facilitates moderate to good yields from hydrazine for the corresponding 3,4-disubstituted products (5–12). By simple hydrolysis, the free N–H pyrroles can be accessed after the Piloty-Robinson reaction and then used directly in the synthesis of octaethylporphyrin (H2OEP, 14) and octaethyltetraphenylporphyrin (H2OETPP, 15). PMID:17432915

  2. Process for the preparation of 3,4-dihydroxybutanoic acid and salts thereof

    DOEpatents

    Hollingsworth, Rawle I.

    1994-01-01

    A process for the preparation of 3,4-dihydroxybutanoic acid (1) and salts thereof from a glucose source containing 1,4-1inked glucose as a substituent is described. The process uses an alkali metal hdyroxide and hydrogen peroxide to convert the glucose source to (1). The compound (1) is useful as a chemical intermediate to naturally occurring fatty acids and is used to prepare 3,4-dihydroxybutanoic acid-gamma-lactone (2) and furanone (3), particularly stereoisomers of these compounds.

  3. Discovery of MK-5172, a Macrocyclic Hepatitis C Virus NS3/4a Protease Inhibitor

    PubMed Central

    2012-01-01

    A new class of HCV NS3/4a protease inhibitors containing a P2 to P4 macrocyclic constraint was designed using a molecular modeling-derived strategy. Building on the profile of previous clinical compounds and exploring the P2 and linker regions of the series allowed for optimization of broad genotype and mutant enzyme potency, cellular activity, and rat liver exposure following oral dosing. These studies led to the identification of clinical candidate 15 (MK-5172), which is active against genotype 1–3 NS3/4a and clinically relevant mutant enzymes and has good plasma exposure and excellent liver exposure in multiple species. PMID:24900473

  4. Synthesis, characterization, and crystal structure of 2-iodo-3,4,5-trimethoxybenzoic acid

    NASA Astrophysics Data System (ADS)

    Kolev, Iliyan N.; Petrova, Svetlana P.; Nikolova, Rositsa P.; Dimowa, Louiza T.; Shivachev, Boris L.

    2013-02-01

    This work describes the synthesis of 2-iodo-3,4,5-trimethoxybenzoic acid. The combination of iodine and silver trifluoroacetate (AgTFA) reagents was used successfully for the iodination of 3,4,5-trimetoxybenzoic acid. To improve the efficiency of the synthetic process a significant modification on the experimental design was also performed. The main structural features of the obtained aryl iodide were investigated by a single crystal X-ray diffraction analysis, FTIR, 1H and 13C NMR spectroscopy.

  5. 3. 4-billion-year-old biogenic pyrites from Barberton, South Africa: Sulfur isotope evidence

    SciTech Connect

    Ohmoto, H.; Kakegawa, T. ); Lowe, D.R. )

    1993-10-22

    Laser ablation mass spectroscopy analysis of sulfur isotopic compositions of microscopic-sized grains of pyrite that formed about 3.4 billion years ago in the Barberton Greenstone Belt, South Africa, show that the pyrite formed by bacterial reduction of seawater sulfate. These data imply that by about 3.4 billion years ago sulfate-reducing bacteria had become active, the oceans were rich in sulfate, and the atmosphere contained appreciable amounts (> > 10[sup [minus]13] of the present atmospheric level) of free oxygen.

  6. Syntheses and Degradations of Fluorinated Heterocyclics. 3; Perfluoroalkyl and Perfluoroalkylether-1,3,4-Oxadiazoles

    NASA Technical Reports Server (NTRS)

    Paciorek, K. J. L.; Kaufman, J.; Nakahara, J. H.; Ito, T. I.; Kratzer, R. H.; Rosser, R. W.; Parker, J. A.

    1977-01-01

    2,5-Bis(perfluoro-n-heptyl)-, 2-perfluoroalkylether-5-perfluoro-n- heptyl- , and 2 , 5-bisperfluoroalkylether-1,3,4-oxadiazoles were synthesized and characterized. 2,5-Bis(perfluoro-n-heptyl)-1,3,4-oxadiazole was thermally and hydrolytically stable at 325 C; however, in the presence of air, degradation took place at 235 C. The perfluoroalkylether analogue exhibited thermal and hydrolytic stability at 325 C; it was found to be unaffected by jet-A fuel and air at 235 C. At 325 C in air some degradation occurred as evidenced by volatiles production, oxygen consumption, and 96% starting material recovery.

  7. Highly efficient poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate)/Si hybrid solar cells with imprinted nanopyramid structures

    NASA Astrophysics Data System (ADS)

    Chen, Jheng-Yuan; Yu, Ming-Hung; Chang, Shun-Fa; Wen Sun, Kien

    2013-09-01

    High-efficiency hybrid solar cells based on nanostructured silicon and poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate), which were fabricated via a simple nanoimprint fabrication process, demonstrated an excellent power conversion efficiency of 10.86%. The complex and costly high-temperature photolithography and masking steps were replaced by techniques that are low-cost and capable of mass production. The nanopyramid structures fabricated on the silicon surface provided an antireflective effect and have a radial junction architecture that enhanced the light absorption and carrier collection efficiency. The short-circuit current density (Jsc) of the hybrid solar cell with nanopyramid structures was greatly improved from 24.5 mA/cm2 to 32.5 mA/cm2 compared with that of a flat surface device. The highest solar cell efficiency was achieved on a 525 μm-thick 2.3 Ω cm n-type Czochralski process (CZ) Si substrate with a designated area of 4 cm2.

  8. Tetra-kis(μ-3,4-dimeth-oxy-phenyl-acetato)-bis-[(3,4-dimeth-oxy-phenyl-acetato)(1,10-phenanthroline)holmium(III)].

    PubMed

    Zhao, Guo-Liang; Liu, Jia-Lu; Liu, Jian-Feng

    2010-01-01

    In the centrosymmetric title compound, [Ho(2)(C(10)H(11)O(4))(6)(C(12)H(8)N(2))(2)], the Ho(III) atom is nine-coordinated by seven O atoms from the 3,4-dimeth-oxy-phenyl-acetate (L) anions and two N atoms from a 1,10-phenanthroline (phen) mol-ecule. The L ligands are coordinated to the Ho(III) ions in three modes: chelating, bridging and bridging-tridentate. Intra-molecular C-H⋯O inter-actions occur. The crystal packing is stabilized by inter-molecular C-H⋯O inter-actions and weak aromatic π-π inter-actions between phen mol-ecules and the aromatic rings of the L ligands [centroid-centroid distance = 3.821 (2) Å]. PMID:21587417

  9. Spin-Phonon and Electron-Phonon Interactions in Multiferroic GdFe3 (BO3)4 and TbFe3 (BO3)4 Evidenced by IR Reflection Spectroscopy

    NASA Astrophysics Data System (ADS)

    Klimin, S. A.; Kashchenko, M. A.; Bezmaternykh, L. N.

    2016-03-01

    We study temperature-dependent polarized reflection spectra of multiferroic GdFe3 (BO3)4 and TbFe3 (BO3)4 single crystals. Signatures of spin-lattice interactions in both compounds and of a formation of the electron-phonon coupled mode in TbFe3 (BO3)4 are discussed.

  10. Methamphetamine, 3,4-methylenedioxymethamphetamine (MDMA) and 3,4-methylenedioxypyrovalerone (MDPV) induce differential cytotoxic effects in bovine brain microvessel endothelial cells.

    PubMed

    Rosas-Hernandez, Hector; Cuevas, Elvis; Lantz, Susan M; Rice, Kenner C; Gannon, Brenda M; Fantegrossi, William E; Gonzalez, Carmen; Paule, Merle G; Ali, Syed F

    2016-08-26

    Designer drugs such as synthetic psychostimulants are indicative of a worldwide problem of drug abuse and addiction. In addition to methamphetamine (METH), these drugs include 3,4-methylenedioxy-methamphetamine (MDMA) and commercial preparations of synthetic cathinones including 3,4-methylenedioxypyrovalerone (MDPV), typically referred to as "bath salts." These psychostimulants exert neurotoxic effects by altering monoamine systems in the brain. Additionally, METH and MDMA adversely affect the integrity of the blood-brain barrier (BBB): there are no current reports on the effects of MDPV on the BBB. The aim of this study was to compare the effects of METH, MDMA and MDPV on bovine brain microvessel endothelial cells (bBMVECs), an accepted in vitro model of the BBB. Confluent bBMVEC monolayers were treated with METH, MDMA and MDPV (0.5mM-2.5mM) for 24h. METH and MDMA increased lactate dehydrogenase release only at the highest concentration (2.5mM), whereas MDPV induced cytotoxicity at all concentrations. MDMA and METH decreased cellular proliferation only at 2.5mM, with similar effects observed after MDPV exposures starting at 1mM. Only MDPV increased reactive oxygen species production at all concentrations tested whereas all 3 drugs increased nitric oxide production. Morphological analysis revealed different patterns of compound-induced cell damage. METH induced vacuole formation at 1mM and disruption of the monolayer at 2.5mM. MDMA induced disruption of the endothelial monolayer from 1mM without vacuolization. On the other hand, MDPV induced monolayer disruption at doses ≥0.5mM without vacuole formation; at 2.5mM, the few remaining cells lacked endothelial morphology. These data suggest that even though these synthetic psychostimulants alter monoaminergic systems, they each induce BBB toxicity by different mechanisms with MDPV being the most toxic. PMID:27320055

  11. Highly conductive poly(3,4-ethylenedioxypyrrole) and poly(3,4-ethylenedioxythiophene) enwrapped Sb2S3 nanorods for flexible supercapacitors.

    PubMed

    Reddy, B Narsimha; Deepa, Melepurath; Joshi, Amish G

    2014-02-01

    Composites of poly(3,4-ethylenedioxypyrrole) or PEDOP and poly(3,4-ethylenedioxythiophene) or PEDOT enwrapped Sb2S3 nanorods have been synthesized for the first time for use as supercapacitor electrodes. Hydrothermally synthesized Sb2S3 nanorods, several microns in length and 50-150 nm wide, offer high surface area and serve as a scaffold for coating conducting polymers, and are a viable alternative to carbon nanostructures. Fibrillar morphologies are achieved for the PEDOP-Sb2S3 and PEDOT-Sb2S3 films in contrast to the regular granular topologies attained for the neat polymers. The remarkably high nanoscale (∼5 S cm(-1)) conductivity of the Sb2S3 nanorods enables facile electron transport in the composites. We constructed asymmetric supercapacitors using the neat polymer or composite and graphite as electrodes. High specific capacitances of 1008 F g(-1) and 830 F g(-1) (at 1 A g(-1)), enhanced power densities (504 and 415 W kg(-1)) and excellent cycling stability (88 and 85% capacitance retention at the end of 1000 cycles) are delivered by the PEDOP-Sb2S3 and PEDOT-Sb2S3 cells relative to the neat polymer cells. A demonstration of a light emitting diode illumination using a light-weight, flexible, supercapacitor fabricated with PEDOP-Sb2S3 and carbon-fiber cloth shows the applicability of Sb2S3 enwrapped conducting polymers as sustainable electrodes for ultra-thin supercapacitors. PMID:24343566

  12. Contrasting effects of d-methamphetamine, 3,4-methylenedioxymethamphetamine, 3,4-methylenedioxypyrovalerone, and 4-methylmethcathinone on wheel activity in rats

    PubMed Central

    Huang, Pai-Kai; Aarde, Shawn M.; Angrish, Deepshikha; Houseknecht, Karen L.; Dickerson, Tobin J.; Taffe, Michael A.

    2012-01-01

    BACKGROUND Reports from US, UK and European drug policy entities, and ongoing media accounts, show increasing recreational use of 4-methylmethcathinone (4-MMC, mephedrone) and 3,4-methylenedioxypyrovalerone (MDPV). Severe sympathomimetic symptoms, hallucinations, psychoses, and even deaths have been reported, yet little scientific information is available on the effects of these compounds in laboratory models. Available studies on the neurochemistry of these drugs show that 4-MMC and MDPV enhance DA neurotransmission, while 4-MMC additionally enhances 5-HT neurotransmission- a pattern much like that reported for methamphetamine vs. 3,4-methylenedioxymethamphetamine (MDMA). As is the case for designer amphetamines, these neurochemical distinctions may predict differential potential for repetitive versus episodic abuse and distinct lasting toxicities. METHODS This study determined relative locomotor stimulant effects of 4-MMC (1–10 mg/kg, s.c.) and MDPV (0.5–5.6 mg/kg, s.c.), in comparison with d-methamphetamine (MA; 0.5–5.6 mg/kg, s.c.) and MDMA (1–7.5 mg/kg, s.c.) on a measure of locomotor activity – voluntary wheel running – in male Wistar rats (N=8). RESULTS Compared to counts of wheel rotations after saline, a biphasic change in the pattern of counts was observed after injections of MA and MDPV, with relatively higher counts following lower doses and lower counts following the highest dose. However, monophasic, dose-dependent reductions in counts were observed in response to injections of MDMA and 4-MMC. CONCLUSION Thus, voluntary wheel running yielded the same categorical distinctions for these drugs as did prior experiments testing the effects of these drugs on monoaminergic neurotransmission. These data indicate that MDPV produces prototypical locomotor stimulant effects whereas 4-MMC is more similar to the entactogen MDMA. PMID:22664136

  13. Analysis of the Rotational Spectra of 2,3,4,5,6-PENTAFLUOROTOLUENE and 1-CHLORO-2,3,4,5,6-PENTAFLUOROBENZENE

    NASA Astrophysics Data System (ADS)

    Osthoff, Ashley A.; Peebles, Rebecca A.; Peebles, Sean A.; Grubbs, Garry S. Grubbs, II; Cooke, Stephen A.; Pate, Brooks H.; Neill, Justin L.; Muckle, Matt T.

    2009-06-01

    The microwave spectra of two substituted pentafluorobenzenes have been obtained. 2,3,4,5,6-Pentafluorotoluene was measured using the FTMW spectrometer at Eastern Illinois University and the chirped-pulse FTMW spectrometer at University of North Texas. The heavy atom structure has been obtained from the assigned ^{13}C transitions and is in reasonable agreement with ab initio calculations at the MP2/6-311++G(2d, 2p) level. The ground state rotational constants are A = 1036.61253(10) MHz, B = 1030.94126(10) MHz, and C = 516.92062(9) MHz, and the single dipole moment component is μ_b = 1.98(17) D. Very small splittings for many of the assigned transitions and multiple, as yet unassigned, lines were presumably due to excited torsional states of the methyl group. In a related study, the microwave spectrum of 1-chloro-2,3,4,5,6-pentafluorobenzene was obtained for both the ^{35}Cl and the ^{37}Cl isotopologues using the chirped-pulse microwave spectrometer at University of Virginia. The preliminary ground state rotational constants for this compound are A = 1028.5403(14) MHz, B = 751.8198(3) MHz and C = 434.3533(4) MHz for ^{35}Cl and A = 1028.5435(7) MHz, B = 734.4786(2) MHz and C = 428.5082(2) MHz for ^{37}Cl. Initial fits of the nuclear quadrupole coupling constants give χ_{aa} = -79.512(15) MHz, χ_{bb} = 43.593(8) MHz, χ_{cc} = 35.92(2) MHz for the ^{35}Cl species and χ_{aa} = -62.68(2) MHz, χ_{bb} = 34.38(4) MHz, χ_{cc} = 28.29(17) MHz for the ^{37}Cl species. These results will be compared with pentafluorotoluene to observe the effects on the structure of the benzene ring when substituting a chlorine atom for a methyl group.

  14. High-temperature heat capacity of YFe3(BO3)4

    NASA Astrophysics Data System (ADS)

    Denisov, V. M.; Denisova, L. T.; Gudim, I. A.; Temerov, V. L.; Volkov, N. V.; Patrin, G. S.; Chumilina, L. G.

    2014-02-01

    The molar heat capacity of YFe3(BO3)4 has been measured using differential scanning calorimetry in the temperature range 339-1086 K. It has been found that the dependence C p = f( T) exhibits an extremum at a temperature of 401 K due to the structural transition.

  15. Project ACE Activity Sets. Book I: Grades 3, 4, and 5.

    ERIC Educational Resources Information Center

    Eden City Schools, NC.

    Eleven activity sets suitable for supplementing social studies units in grades 3, 4, and 5 are presented. Each set lists appropriate resources, concepts, general objectives and instructional objectives for each activity within the set. Grade 3 sets are "You Can Help Conserve Our Natural Resources,""Urban Decay and Urban Renewal,""The Use of…

  16. Reversible glutathionylation of Sir2 by monothiol glutaredoxins Grx3/4 regulates stress resistance.

    PubMed

    Vall-Llaura, Núria; Reverter-Branchat, Gemma; Vived, Celia; Weertman, Naomi; Rodríguez-Colman, María José; Cabiscol, Elisa

    2016-07-01

    The regulatory mechanisms of yeast Sir2, the founding member of the sirtuin family involved in oxidative stress and aging, are unknown. Redox signaling controls many cellular functions, especially under stress situations, with dithiol glutaredoxins (Grxs) playing an important role. However, monothiol Grxs are not considered to have major oxidoreductase activity. The present study investigated the redox regulation of yeast Sir2, together with the role and physiological impact of monothiol Grx3/4 as Sir2 thiol-reductases upon stress. S-glutathionylation of Sir2 upon disulfide stress was demonstrated both in vitro and in vivo, and decreased Sir2 deacetylase activity. Physiological levels of nuclear Grx3/4 can reverse the observed post-translational modification. Grx3/4 interacted with Sir2 and reduced it after stress, thereby restoring telomeric silencing activity. Using site-directed mutagenesis, key cysteine residues at the catalytic domain of Sir2 were identified as a target of S-glutathionylation. Mutation of these residues resulted in cells with increased resistance to disulfide stress. We provide new mechanistic insights into Grx3/4 regulation of Sir2 by S-deglutathionylation to increase cell resistance to stress. This finding offers news perspectives on monothiol Grxs in redox signaling, describing Sir2 as a physiological substrate regulated by S-glutathionylation. These results might have a relevant role in understanding aging and age-related diseases. PMID:27085841

  17. 40 CFR 721.10584 - Cyclopentene, 1,3,3,4,4,5,5-heptafluoro-.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ...) TOXIC SUBSTANCES CONTROL ACT SIGNIFICANT NEW USES OF CHEMICAL SUBSTANCES Significant New Uses for Specific Chemical Substances § 721.10584 Cyclopentene, 1,3,3,4,4,5,5-heptafluoro-. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as...

  18. 40 CFR 721.10584 - Cyclopentene, 1,3,3,4,4,5,5-heptafluoro-.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ...) TOXIC SUBSTANCES CONTROL ACT SIGNIFICANT NEW USES OF CHEMICAL SUBSTANCES Significant New Uses for Specific Chemical Substances § 721.10584 Cyclopentene, 1,3,3,4,4,5,5-heptafluoro-. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as...

  19. 40 CFR 721.10433 - Cyclopentene, 1,2,3,3,4,4,5,5-octafluoro-.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ....80(f) and (j) (dry etching agent and chemical vapor deposition agent for the production of...) TOXIC SUBSTANCES CONTROL ACT SIGNIFICANT NEW USES OF CHEMICAL SUBSTANCES Significant New Uses for Specific Chemical Substances § 721.10433 Cyclopentene, 1,2,3,3,4,4,5,5-octafluoro-. (a) Chemical...

  20. 40 CFR 721.10433 - Cyclopentene, 1,2,3,3,4,4,5,5-octafluoro-.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ....80(f) and (j) (dry etching agent and chemical vapor deposition agent for the production of...) TOXIC SUBSTANCES CONTROL ACT SIGNIFICANT NEW USES OF CHEMICAL SUBSTANCES Significant New Uses for Specific Chemical Substances § 721.10433 Cyclopentene, 1,2,3,3,4,4,5,5-octafluoro-. (a) Chemical...

  1. QSAR analysis of antitumor activities of 3,4-ethylenedioxythiphene derivatives

    NASA Astrophysics Data System (ADS)

    Rastija, Vesna; Bajić, Miroslav; Stolić, Ivana; Krstulović, Luka; Jukić, Marijana; Glavaš-Obrovac, Ljubica

    2015-12-01

    QSAR analysis was performed for the antitumor activity of 27 derivatives of 3,4-ethylenedioxythiophene against six carcinoma cell lines. The best models were obtained with surface area (SAG) in combination with lipohilicity (log P) as descriptors. Results have shown that molecules with smaller solvent accessible surface area and higher lipophilicy should have higher biological activity against carcinoma cell.

  2. Dual PDE3/4 inhibitors as therapeutic agents for chronic obstructive pulmonary disease

    PubMed Central

    Banner, Katharine H; Press, Neil J

    2009-01-01

    Phosphodiesterase (PDE)4, and to a lesser extent, PDE3/4 inhibitors have attracted considerable interest as potential therapeutic agents for diseases including chronic obstructive pulmonary disease. Indeed, ibudilast and theophylline are utilized clinically, and roflumilast is in late-stage clinical development. Unfortunately, however many PDE4 and dual PDE3/4 inhibitors have failed in early development due to low therapeutic ratios. The majority of these compounds are however orally administered and non-selective for either PDE3(A, B) or PDE4(A, B, C, D) subtypes. Developing an inhaled dual PDE3/4 inhibitor with subtype specificity may represent one strategy to improve the therapeutic index. Indeed combined inhibition of PDE3 and PDE4 inhibitor has additive and synergistic anti-inflammatory and bronchodilatory effects versus inhibition of either PDE3 or PDE4 alone. Given that synergy has been seen in terms of efficacy end points, an obvious concern is that synergy may also be observed in side effects. Interestingly, however, no synergy or additive effects with a combination of a PDE3 and PDE4 inhibitor in a cardiomyocyte assay were observed. This review will summarize the rationale for developing an inhaled dual PDE3/4 inhibitor, as a treatment for chronic obstructive pulmonary disease together with recent advances in trying to understand the pathogenesis of PDE inhibitor-induced mesenteric vasculitis (a key potential dose-limiting side effect of these agents), highlighting potential early and sensitive predictive biomarkers. PMID:19508401

  3. 3/4 view of waterfront facade looking southwest from across the ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3/4 view of waterfront facade looking southwest from across the creek. Note the 1965 concrete block addition to the main oyster house. Lifting derrick can be seen at left in front of the building and next to the hoist house. - J.C. Lore Oyster House, 14430 Solomons Island Road, Solomons, Calvert County, MD

  4. The Role of PI(3,4,5)P3 Signaling During Axonal Growth Cone Chemotaxis

    NASA Astrophysics Data System (ADS)

    Henle, Steven J.

    Development of the nervous system is a remarkably complex process that involves the birth of billions of neurons leading to the formation of trillions of synapses. Many biological programs underlie the formation of a functional nervous system. I focused on trying to understand the process by which a newly formed axon navigates a series of signals in the environment that guide it to a synaptic partner. At the tip of the extending neurite is a conical expansion known as the growth cone that primarily is responsible for performing this pathfinding process. In order to do so it senses the environment, and induces a program of intracellular signaling that in turn leads to directed axon extension. My work has focused on understanding this signaling machinery. I have aimed to understand the role the phosphoinositde PI(3,4,5)P3 due to the critical role it plays in amoeboid chemotaxis. I discovered that PI(3,4,5)P3 and its downstream kinase Akt define the leading edge during growth cone chemotaxis and lead to activation of a TRP (Transient Receptor Potential) channel. Furthermore, I found that the PI(3,4,5)P3 phosphatase PTEN appears to be exclusively linked to guiding growth cone migration in response to a gradient of chemorepellent. Taken together my data demonstrate that PI(3,4,5)P3 functions as a key instructive mediator of growth cone chemotaxis.

  5. EFFECTS OF 3,4-METHYLDENDIOXYMETHAMPHETAMINE ON AUTONOMIC THERMOREGULATORY RESPONSES OF THE RAT

    EPA Science Inventory

    3,4-methylenedioxymethamphetamine (MDMA), a substituted amphetamine analogue which stimulates serotonin release in the CNS, has been shown to induce near lethal elevations in core temperature in the rat. o characterize the effects of MDMA on temperature regulation, we measured me...

  6. PHOTOSOLVOLYSIS OF 3,4-DICHLOROANILINE IN WATER: EVIDENCE FOR AN ARYL CATION INTERMEDIATE

    EPA Science Inventory

    Irradiation of 3,4-dichloroaniline in water (lambda > 290nm) gave 2-chloro-5-aminophenol with a conversion of 78 plus or minus 5%. The photolysis quantum yield at 313nm of 0.05 plus or minus 0.003 was unaffected by cyanide (0.35M) or pH changes between 4 and 12. A MO calculation ...

  7. Temperature dependence of 35Cl NQR in 3,4-Dichlorophenol

    NASA Astrophysics Data System (ADS)

    Chandramani, R.; Devaraj, N.; Indumathy, A.; Ramakrishna, J.

    NQR frequencies in 3,4-dichlorophenol are investigated in the temperature range 77 K to room temperature. Two resonances have been observed throughout the temperature range, corresponding to the two chemically inequivalent chlorine sites. Using Bayer's theory and Brown's method torsional frequencies and their temperature dependence in this range are estimated.

  8. Growth and optical properties of nonlinear LuAl3(BO3)4 crystals.

    PubMed

    Fang, Shenghao; Liu, Hua; Huang, Lingxiong; Ye, Ning

    2013-07-15

    The optical properties of pure LuAl(3)(BO(3))(4) (abbreviated as LuAB) crystals were investigated for the first time. Large UV-transparent LuAl(3)(BO(3))(4) crystals were grown by a high-temperature top-seeding method with Li(2)WO(4)O(7)-B(2)O(3) as the flux. The refractive indices of LuAl(3)(BO(3))(4) at several wavelengths covering ultraviolet-visible and near-infrared regions were measured by the auto-collimation method. The parameters of Sellmeier's dispersion equation were determined from the experimental data. The phase-matching curve of second harmonic generation was measured. The nonlinear optical coefficient d(11) of LuAB crystal was determined to be 1.10 pm/V by a phase-matching method. The UV cut-off wavelength of the LuAl(3)(BO(3))(4) crystal was shorter than 190 nm. PMID:23938492

  9. 3/4 VIEW OF PORT SIDE FROM BOW AFT SHOWING BILGE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3/4 VIEW OF PORT SIDE FROM BOW AFT SHOWING BILGE KEEL STABILIZERS ON HULL BOTTOM. - U.S. Coast Guard Buoy Tenders, 180' Class, U.S. Coast Guard Headquarters, 2100 Second Street Southwest, Washington, District of Columbia, DC

  10. The Use of Psychological State Words by Late Talkers at Ages 3, 4, and 5 Years

    ERIC Educational Resources Information Center

    Lee, Eliza Carlson; Rescorla, Leslie

    2008-01-01

    The use of four types of psychological state words (physiological, emotional, desire, and cognitive) during mother-child play sessions at ages 3, 4, and 5 years was examined in 30 children diagnosed with delayed expressive language at 24-31 months and 15 age-matched comparison children with typical development. The children's mean length of…

  11. 32. VERTICAL OSCILLATIONS, 3/4 VIEW, 7 NOVEMBER 1940, FROM 16MM ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    32. VERTICAL OSCILLATIONS, 3/4 VIEW, 7 NOVEMBER 1940, FROM 16MM FILM SHOT PROFESSOR F.B. FARQUHARSON, UNIVERSITY OF WASHINGTON. (LABORATORY STUDIES ON THE TACOMA NARROWS BRIDGE, AT UNIVERSITY OF WASHINGTON (SEATTLE: UNIVERSITY OF WASHINGTON, DEPARTMENT OF CIVIL ENGINEERING, 1941) - Tacoma Narrows Bridge, Spanning Narrows at State Route 16, Tacoma, Pierce County, WA

  12. 33. VERTICAL AND TORSIONAL OSCILLATIONS, 3/4 VIEW, 7 NOVEMBER 1940, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    33. VERTICAL AND TORSIONAL OSCILLATIONS, 3/4 VIEW, 7 NOVEMBER 1940, FROM 16MN FILM SHOT BY PROFESSOR F.B. FARQUHARSON, UNIVERSITY OF WASHINGTON. (LABORATORY STUDIES ON THE TACOMA NARROWS BRIDGE, AT UNIVERSITY OF WASHINGTON (SEATTLE: UNIVERSITY OF WASHINGTON, DEPARTMENT OF CIVIL ENGINEERING, 1941) - Tacoma Narrows Bridge, Spanning Narrows at State Route 16, Tacoma, Pierce County, WA

  13. Synthesis and antifungal activity of natural product-based 6-alkyl-2 3 4 5-tetrahydropyridines

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Seven 6-alkyl-2,3,4,5-tetrahydropyridines (5a–5g) that mimic the natural products piperideines that were recently identified in the fire ant venom have been synthesized. Compounds 5c–5g with the C-6 alkyl chain lengths from C14 to C18 showed varying degrees of antifungal activities, with 5e (6-hexa...

  14. 5. 3/4 VIEW OF BRIDGE FROM THE WEST BANK OF ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. 3/4 VIEW OF BRIDGE FROM THE WEST BANK OF THE IOWA RIVER, LOOKING SOUTHWEST. PIERS FROM THE OLD BENTON STREET BRIDGE CAN BE SEEN IN THE WATER TO THE LEFT OF THE BRIDGE Harms - Benton Street Bridge, Spanning Iowa River at Benton Street, Iowa City, Johnson County, IA

  15. 2,2\\',3,3\\',4,4\\',5,5\\',6,6\\'-Decabromodiphenyl ether (BDE-209)

    Integrated Risk Information System (IRIS)

    2,2 ' , 3,3 ' , 4,4 ' , 5,5 ' , 6,6 ' - Decabromodiphenyl ether ( BDE - 209 ) ; CASRN 1163 - 19 - 5 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process

  16. Fuel compositions containing maleic derivatives of 2,5-dimercapto-1,3,4-thiadiazole

    SciTech Connect

    Karol, T.J.

    1989-11-14

    This patent describes a diesel fuel composition. It is characterized by improved wear properties. It comprises: a major portion of middle distillates boiling in the range of about 163{degrees}to 400{degrees}C. and a minor wear improving amount of a reaction product of a maleic compound and 2,5-dimercapto-1,3,4-thiadiazole.

  17. 3. DETAIL, 3/4 VIEW OF HOT BLAST STOVE ON TOP ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3. DETAIL, 3/4 VIEW OF HOT BLAST STOVE ON TOP OF FURNACE SHOWING CAST-IRON RETORTS AND TURNED HEAD (WHERE RAW MATERIALS WERE LOADED INTO FURNACE). - Nassawango Iron Furnace, Furnace Road, 1.2 miles west of Maryland Route 12, Snow Hill, Worcester County, MD

  18. Guidelines for Health Assessment and Intervention Techniques for 3, 4, and 5 Year Old Children.

    ERIC Educational Resources Information Center

    Bentley, Judy K.

    These guidelines were developed to help registered nurses identify preschoolers with potential handicaps in the course of health assessments. Contents include guidelines on 3-, 4-, and 5-year-olds. Contents are organized within age levels in terms of functioning levels and anticipatory guidance. Functional areas covered include physical,…

  19. Polyimides from 2,3,3',4'-Biphenyltetracarboxylic Dianhydride and Aromatic Diamines

    NASA Technical Reports Server (NTRS)

    Hergenrother, Paul M. (Inventor); Smith, Joseph G. (Inventor); Connell, John W. (Inventor); Watson, Kent A. (Inventor)

    2005-01-01

    The present invention relates generally to polyimides. It relates particularly to novel polyimides prepared from 2,3, 3',4' -biphenyltetracarboxylic dianhydride and aromatic diamines. These novel polyimides have low color, good solubility, high thermal emissivity, low solar absorptivity and high tensile strength.

  20. Synthesis of Some Benzimidazole Derivatives Bearing 1,3,4-Oxadiazole Moiety as Anticancer Agents

    PubMed Central

    MAZZIO, ELIZABETH; GANGAPURUM, MADHAVEI; MATEEVA, NELLY; REDDA, K. K.

    2015-01-01

    In an effort to establish new benzimidazole related structural leads with improved anticancer activity, several new benzimidazole derivatives (5a–i) with 1,3,4-oxadiazole scaffold incorporated were synthesized and studied for their anticancer activity. The anticancer screening against MDA-MB-231 breast cancer cell lines showed that compound (5c) exhibited moderate cytotoxicity. PMID:26451350

  1. Treatment Implications for Young Adult Users of MDMA (3,4-Methylenedyoxymethamphetamine)

    ERIC Educational Resources Information Center

    Dew, Brian J.; Elifson, Kirk W.; Sterk, Claire E.

    2006-01-01

    Young adults' 3,4-methylenedyoxymethamphetamine (MDMA) use is a national public health concern. Although research on the epidemiology of MDMA use has increased, inquiry into intervention and treatment is needed. The authors examine results from an epidemiological investigation from a clinical perspective and provide suggestions for clinicians…

  2. 23. Building N9; 3/4 view, looking NW at loading dock. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    23. Building N-9; 3/4 view, looking NW at loading dock. The view also shows the relationship of the blast barricades to the building. (Ryan) - Holston Army Ammunition Plant, RDX-and-Composition-B Manufacturing Line 9, Kingsport, Sullivan County, TN

  3. 1. Building C9; 3/4 view, looking SE; showing storage tanks ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. Building C-9; 3/4 view, looking SE; showing storage tanks on the west side of the building and the railroad tracks in foreground. (Ryan and Harms) - Holston Army Ammunition Plant, RDX-and-Composition-B Manufacturing Line 9, Kingsport, Sullivan County, TN

  4. 7. Building G9; 3/4 view, looking SE. Storage tanks for ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    7. Building G-9; 3/4 view, looking SE. Storage tanks for Building G-9 are in the foreground and the blast barricade for Building H-9 is in the background. (Ryan) - Holston Army Ammunition Plant, RDX-and-Composition-B Manufacturing Line 9, Kingsport, Sullivan County, TN

  5. 3/4-Fractional Superdiffusion in a System of Harmonic Oscillators Perturbed by a Conservative Noise

    NASA Astrophysics Data System (ADS)

    Bernardin, Cédric; Gonçalves, Patrícia; Jara, Milton

    2016-05-01

    We consider a harmonic chain perturbed by an energy conserving noise and show that after a space-time rescaling the energy-energy correlation function is given by the solution of a skew-fractional heat equation with exponent 3/4.

  6. 43 CFR 3420.3-4 - Regional tract ranking, selection, environmental analysis and scheduling.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 43 CFR subpart 1821). BLM will publish a notice in the Federal Register of the 60-day comment period... 43 Public Lands: Interior 2 2011-10-01 2011-10-01 false Regional tract ranking, selection...) COMPETITIVE LEASING Competitive Leasing § 3420.3-4 Regional tract ranking, selection, environmental...

  7. 43 CFR 3420.3-4 - Regional tract ranking, selection, environmental analysis and scheduling.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 43 CFR subpart 1821). BLM will publish a notice in the Federal Register of the 60-day comment period... 43 Public Lands: Interior 2 2012-10-01 2012-10-01 false Regional tract ranking, selection...) COMPETITIVE LEASING Competitive Leasing § 3420.3-4 Regional tract ranking, selection, environmental...

  8. 2. GENERAL VIEW OF HAWAII MARITIME CENTER WITH PORT 3/4 ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    2. GENERAL VIEW OF HAWAII MARITIME CENTER WITH PORT 3/4 STERN VIEW OF OIL TANKER FALLS OF CLYDE REPLICA POLYNESIAN SAILING CRAFT ARE SEEN ALONGSIDE AND BEHIND HER. - Ship "Falls of Clyde", Hawaii Maritime Center,Pier 7, Honolulu, Honolulu County, HI

  9. Markers for Persistent Specific Expressive Language Delay in 3-4-Year-Olds

    ERIC Educational Resources Information Center

    Everitt, Andrea; Hannaford, Philip; Conti-Ramsden, Gina

    2013-01-01

    Background: Identifying 3-4-year-olds who are most at risk of persisting language difficulties, and possibly specific language impairment (SLI), is difficult due to the natural variation of language in young children. In older children, markers for SLI have been identified that differentiate between children with and without SLI. It is not known…

  10. Antiviral activity of 3,4'-dihydroxyflavone on influenza a virus.

    PubMed

    Hossain, Mohammed Kawser; Choi, Hye Yeon; Hwang, Jae-Seon; Dayem, Ahmed Abdal; Kim, Jung-Hyun; Kim, Young Bong; Poo, Haryoung; Cho, Ssang-Goo

    2014-06-01

    Influenza virus infection causes thousands of deaths and millions of hospitalizations worldwide every year and the emergence of resistance to anti-influenza drugs has prompted scientists to seek new natural antiviral materials. In this study, we screened 13 different flavonoids from various flavonoid groups to identify the most potent antiviral flavonoid against human influenza A/PR/8/34 (H1N1). The 3-hydroxyl group flavonoids, including 3,2᾿dihydroxyflavone (3,2᾿DHF) and 3,4᾿dihydroxyflavone (3,4᾿DHF), showed potent anti-influenza activity. They inhibited viral neuraminidase activity and viral adsorption onto cells. To confirm the anti-influenza activity of these flavonoids, we used an in vivo mouse model. In mice infected with human influenza, oral administration of 3,4᾿DHF significantly decreased virus titers and pathological changes in the lung and reduced body weight loss and death. Our data suggest that 3-hydroxyl group flavonoids, particularly 3,4᾿DHF, have potent antiviral activity against human influenza A/PR/8/34 (H1N1) in vitro and in vivo. Further clinical studies are needed to investigate the therapeutic and prophylactic potential of the 3-hydroxyl group flavonoids in treating influenza pandemics. PMID:24871979

  11. CLONING IN PSEUDOMONAS CEPACIA: EXPRESSION AND REGULATION OF THE PROTOCATECHUATE 3,4-DIOXYGENASE GENES

    EPA Science Inventory

    Genes for the a and B subunits of the enzyme protocatechuate 3,4-dioxygenase were cloned from the Pseudomonas cepacia DB01 chromosome on a 9.5 kilobase pair PstI fragment into the broad-host-range cloning vector pR023l7. he resultant clone was able to complement protocatechuate 3...

  12. Thicknesses of mare basalts on the Moon from gravity and topography

    NASA Astrophysics Data System (ADS)

    Gong, Shengxia; Wieczorek, Mark A.; Nimmo, Francis; Kiefer, Walter S.; Head, James W.; Huang, Chengli; Smith, David E.; Zuber, Maria T.

    2016-05-01

    A new method of determining the thickness of mare basalts on the Moon is introduced that is made possible by high-resolution gravity data acquired from NASA's Gravity Recovery and Interior Laboratory (GRAIL) mission. Using a localized multitaper spherical-harmonic analysis, an effective density spectrum is calculated that provides an estimate of the average crustal density as a function of spherical harmonic degree. By comparing the observed effective density spectrum with one generated from a theoretical model, the thickness of mare basalts can be constrained. We assume that the grain density of the basalts is known from remote sensing data and petrologic considerations, we assign a constant porosity to the basalts, and we let both the thickness of the basalts and the density of the underlying crust vary. Using this method, the total thickness of basalts was estimated on the nearside hemisphere, yielding an average of 0.74 km with 1σ upper and lower bounds of 1.62 km and 100 m, respectively. The region of Marius Hills, which is a long-lived volcanic complex, is found to have the thickest basalts, with an average of 2.86 km and 1σ limits of 3.65 and 1.02 km, respectively. The crust beneath the Mare Imbrium basalts is found to have an atypically high density of about 3000 kg m-3 that we interpret as representing a mafic, unfractured, impact melt sheet.

  13. Thickness of the Magnetic Crust of Mars from Magneto-Spectral Analysis

    NASA Technical Reports Server (NTRS)

    Voorhies, Coerte V.

    2006-01-01

    Previous analysis of the magnetic spectrum of Mars showed only a crustal source field. The observational spectrum was fairly well fitted by the spectrum expected from random dipolar sources scattered on a spherical shell about 46 plus or minus 10 km below Mars' 3389.5 km mean radius. This de-correlation depth overestimates the typical depth of extended magnetized structures, and so was judged closer to mean source layer thickness than twice its value. To better estimate the thickness of the magnetic crust of Mars, six different magnetic spectra were fitted with the theoretical spectrum expected from a novel, bimodal distribution of magnetic sources. This theoretical spectrum represents both compact and extended, laterally correlated sources, so source shell depth is doubled to obtain layer thickness. The typical magnetic crustal thickness is put at 47.8 plus or minus 8.2 km. The extended sources are enormous, typically 650 km across, and account for over half the magnetic energy at low degrees. How did such vast regions form?

  14. Conformational Changes in Inositol 1,3,4,5,6-Pentakisphosphate 2-Kinase upon Substrate Binding

    PubMed Central

    Baños-Sanz, José Ignacio; Sanz-Aparicio, Julia; Whitfield, Hayley; Hamilton, Chris; Brearley, Charles A.; González, Beatriz

    2012-01-01

    Inositol 1,3,4,5,6-pentakisphosphate 2-kinase (IP5 2-K) catalyzes the synthesis of inositol 1,2,3,4,5,6-hexakisphosphate from ATP and IP5. Inositol 1,2,3,4,5,6-hexakisphosphate is implicated in crucial processes such as mRNA export, DNA editing, and phosphorus storage in plants. We previously solved the first structure of an IP5 2-K, which shed light on aspects of substrate recognition. However, failure of IP5 2-K to crystallize in the absence of inositide prompted us to study putative conformational changes upon substrate binding. We have made mutations to residues on a region of the protein that produces a clasp over the active site. A W129A mutant allowed us to capture IP5 2-K in its different conformations by crystallography. Thus, the IP5 2-K apo-form structure displays an open conformation, whereas the nucleotide-bound form shows a half-closed conformation, in contrast to the inositide-bound form obtained previously in a closed conformation. Both nucleotide and inositide binding produce large conformational changes that can be understood as two rigid domain movements, although local changes were also observed. Changes in intrinsic fluorescence upon nucleotide and inositide binding are in agreement with the crystallographic findings. Our work suggests that the clasp might be involved in enzyme kinetics, with the N-terminal lobe being essential for inositide binding and subsequent conformational changes. We also show how IP5 2-K discriminates between inositol 1,3,4,5-tetrakisphosphate and 3,4,5,6-tetrakisphosphate enantiomers and that substrate preference can be manipulated by Arg130 mutation. Altogether, these results provide a framework for rational design of specific inhibitors with potential applications as biological tools for in vivo studies, which could assist in the identification of novel roles for IP5 2-K in mammals. PMID:22745128

  15. Molecular and Electronic Structure of Re2Br4(PMe3)4.

    PubMed

    Johnstone, Erik V; Poineau, Frederic; Todorova, Tanya K; Forster, Paul M; Sørensen, Lasse K; Fdez Galván, Ignacio; Lindh, Roland; Czerwinski, Kenneth R; Sattelberger, Alfred P

    2016-07-18

    The dinuclear rhenium(II) complex Re2Br4(PMe3)4 was prepared from the reduction of [Re2Br8](2-) with (n-Bu4N)BH4 in the presence of PMe3 in propanol. The complex was characterized by single-crystal X-ray diffraction (SCXRD) and UV-visible spectroscopy. It crystallizes in the monoclinic C2/c space group and is isostructural with its molybdenum and technetium analogues. The Re-Re distance (2.2521(3) Å) is slightly longer than the one in Re2Cl4(PMe3)4 (2.247(1) Å). The molecular and electronic structure of Re2X4(PMe3)4 (X = Cl, Br) were studied by multiconfigurational quantum chemical methods. The computed ground-state geometry is in excellent agreement with the experimental structure determined by SCXRD. The calculated total bond order (2.75) is consistent with the presence of an electron-rich triple bond and is similar to the one found for Re2Cl4(PMe3)4. The electronic absorption spectrum of Re2Br4(PMe3)4 was recorded in benzene and shows a series of low-intensity bands in the range 10 000-26 000 cm(-1). The absorption bands were assigned based on calculations of the excitation energies with the multireference wave functions followed by second-order perturbation theory using the CASSCF/CASPT2 method. Calculations predict that the lowest energy band corresponds to the δ* → σ* transition, while the next higher energy bands were attributed to the δ* → π*, δ → σ*, and δ → π* transitions. PMID:27387436

  16. 3.4 Micron Emission from Aliphatic Hydrocarbons in Proto-Planetary Nebulae

    NASA Astrophysics Data System (ADS)

    Hrivnak, B. J.; Kwok, S.; Geballe, T. R.

    2002-12-01

    A family of infrared emission features at 3.3, 6.2, 7.7, 8.6, 11.3 μ m are seen in a variety of objects with strong uv radiation fields. These features are attributed to stretching and bending modes of aromatic compounds. An aliphatic feature has been detected at 3.4 μ m in some of these same objects. Proto-planetary nebulae (PPNs) are in a short-lived stage of evolution between the asymptotic giant branch and planetary nebula (PN) phases. It is observed that in this transitional stage, the strengths of some of these infrared emission features differ from those seen in PNs. In particular, the 3.4 μ m feature, which is usually much weaker than the 3.3 μ m feature, is of comparable strength in some PPNs. To better understand the properties of these features, we carried out medium-resolution (R ~2000) spectroscopy of a sample of PPNs in the 3 μ m region using the NIRSPEC spectrograph on the Keck II telescope. Eight PPNs were observed. These resulted in the first detection of the 3.4 μ m feature in two objects and possible detections in two others and the first detection of the 3.3 μ m feature in two other objects. We will discuss what has been learned from the observations of the 3.4 μ m feature and review the evidence for a correlation of the ratio of the 3.4 to 3.3 μ m features with spectral type. These observations were carried out in the service observing mode as part of a program of limited access to Keck provided to the Gemini Observatory community. This work was funded in part by grants to BJH from the NSF and to SK by NSERC.

  17. Gliotoxin Suppresses Macrophage Immune Function by Subverting Phosphatidylinositol 3,4,5-Trisphosphate Homeostasis

    PubMed Central

    Schlam, Daniel; Canton, Johnathan; Carreño, Marvin; Kopinski, Hannah; Freeman, Spencer A.; Grinstein, Sergio

    2016-01-01

    ABSTRACT Aspergillus fumigatus, an opportunistic fungal pathogen, spreads in the environment by releasing numerous conidia that are capable of reaching the small alveolar airways of mammalian hosts. In otherwise healthy individuals, macrophages are responsible for rapidly phagocytosing and eliminating these conidia, effectively curbing their germination and consequent invasion of pulmonary tissue. However, under some circumstances, the fungus evades phagocyte-mediated immunity and persists in the respiratory tree. Here, we report that A. fumigatus escapes macrophage recognition by strategically targeting phosphatidylinositol 3,4,5-trisphosphate [PtdIns(3,4,5)P3] metabolism through gliotoxin, a potent immunosuppressive mycotoxin. Time-lapse microscopy revealed that, in response to the toxin, macrophages cease to ruffle, undergo abrupt membrane retraction, and fail to phagocytose large targets effectively. Gliotoxin was found to prevent integrin activation and interfere with actin dynamics, both of which are instrumental for phagocytosis; similar effects were noted in immortalized and primary phagocytes. Detailed studies of the underlying molecular mechanisms of toxicity revealed that inhibition of phagocytosis is attributable to impaired accumulation of PtdIns(3,4,5)P3 and the associated dysregulation of downstream effectors, including Rac and/or Cdc42. Strikingly, in response to the diacylglycerol mimetic phorbol 12-myristate 13-acetate, gliotoxin-treated macrophages reactivate beta integrins, reestablish actin dynamics, and regain phagocytic capacity, despite the overt absence of plasmalemmal PtdIns(3,4,5)P3. Together, our findings identify phosphoinositide metabolism as a critical upstream target of gliotoxin and also indicate that increased diacylglycerol levels can bypass the requirement for PtdIns(3,4,5)P3 signaling during membrane ruffling and phagocytosis. PMID:27048806

  18. Developing Knowledge Management (KM): Contributions by Organizational Learning and Total Quality Management (TQM)

    ERIC Educational Resources Information Center

    Hung, Richard Yu-Yuan; Lien, Bella Ya-Hui

    2005-01-01

    Knowledge management is an integral business function for many organizations to manage intellectual resources effectively. From a resource-based perspective, organizational learning and TQM are antecedents that are closely related to KM. The purposes of this study were to explain the contents of KM, and explore the relationship between KM-related…

  19. Deformation of an elastic shell with variable thickness: a comparison of different methods

    NASA Astrophysics Data System (ADS)

    Kalousová, K.; Souček, O.; Čadek, O.

    2012-08-01

    Deformation of the outermost parts of single-plate planetary bodies is often modelled in terms of the response of a spherical elastic shell to surface or basal loading. As the thickness of such elastic lithosphere is usually much smaller than the radius of the body, the deformation is commonly approximated by that obtained for a thin elastic shell of uniform thickness. The main advantage of the thin shell approximation is its simplicity—the solution can be expressed analytically if the thickness of the shell is uniform, but even in the case of a thin shell of variable thickness, when the problem must be solved numerically, the computational costs are much lower than in a fully 3-D case. Here we analyse the error of the thin shell approximation by comparing it with the solution obtained for a shell of finite thickness using finite element methods. Special attention is paid to a shell of variable thickness and, in general, to the effect of elastic thickness variations on local deformation. For a shell of uniform thickness with the outer radius corresponding to Mars, we find that the error in radial displacement at low harmonic degrees (ℓ≤ 20) does not exceed 5 per cent for small shell thicknesses (d≤ 50 km) and 10 per cent for thick shells (d˜ 250 km). Similar accuracy is also found for a shell of variable thickness if the thin shell approximation is used. Our numerical tests indicate that local deformation of a shell is mostly sensitive to the average thickness of the shell in the near zone while the effect of thickness variations in the far zone can be neglected in the first approximation. Consequently, the extremely simple thin shell method, designed for shells of uniform thickness, can be effectively used to obtain a reasonably accurate estimate of deflection even in the case of a shell with varying thickness. Finally, we investigate the deformation of an elastic lithosphere due to viscous flow beneath the shell, and we propose an extension of the

  20. Time-temperature-burial significance of Devonian anthracite implies former great (approx. 6. 5 km) depth of burial of Catskill Mountains, New York

    SciTech Connect

    Friedman, G.M.; Sanders, J.E.

    1982-02-01

    Specimens of coalified plant debris in Tully-correlative strata of the Gilboa Formation (uppermost Middle Devonian) within the eastern Catskill Mountains of New York State have been converted to anthracite having a vitrinite reflectance of 2.5%. This implies a level of organic metamorphism (LOM) of 16. The specimens are about 350 m.y. old; if 200 m.y. is taken as the duration of the time of exposure to the maximum geothermal temperature, then the LOM of 16 and other thermal indicators imply a maximum temperature of 190/sup 0/C. Using a geothermal gradient of 26/sup 0/C.km/sup -1/ (17/sup 0/F.1,000 ft/sup -1/), a former depth of burial of 6.5 km is implied. Such former deep burial is not usually inferred for the Catskills, but it is consistent with the idea that the thick (about 6.4 km or 21,000 ft) Carboniferous strata of northeastern Pennsylvania formerly extended northeast far enough to bury the Catskills. The lack of metamorphism of the Paleozoic strata lying about 4.5 km beneath the Tully-correlative rocks and exposed in the adjacent Hudson Valley places low limits on the former geothermal gradient; this supports the concept of great depth of former burial of the Catskills. For example, 6.5 km of former burial and a geothermal gradient of 26/sup 0/C.km/sup -1/ imply a temperature of 307/sup 0/C for the base of the Paleozoic. By contrast, only 1 km of former burial requires a geothermal gradient of 170/sup 0/C.km/sup -1/, which would have subjected the base of the Paleozoic to a temperature of 955/sup 0/GAMMA, which is far higher than the 600 to 650/sup 0/C recently inferred for the Acadian-age metamorphism of the Taconic allochthon in southwestern Massachusetts and adjoining areas.