Science.gov

Sample records for 3-4 shift valve

  1. VALVE

    DOEpatents

    Arkelyan, A.M.; Rickard, C.L.

    1962-04-17

    A gate valve for controlling the flow of fluid in separate concentric ducts or channels by means of a single valve is described. In one position, the valve sealing discs engage opposed sets of concentric ducts leading to the concentric pipes defining the flow channels to block flow therethrough. In another position, the discs are withdrawn from engagement with the opposed ducts and at the same time a bridging section is interposed therebetween to define concentric paths coextensive with and connecting the opposed ducts to facilitate flow therebetween. A wedge block arrangement is employed with each sealing disc to enable it to engage the ducts. The wedge block arrangement also facilitates unobstructcd withdrawal of the discs out of the intervening space between the sets of ducts. (AEC)

  2. Valve

    DOEpatents

    Cho, Nakwon

    1980-01-01

    A positive acting valve suitable for operation in a corrosive environment is provided. The valve includes a hollow valve body defining an open-ended bore for receiving two, axially aligned, spaced-apart, cylindrical inserts. One insert, designated the seat insert, terminates inside the valve body in an annular face which lies within plane normal to the axis of the two inserts. An elastomeric O-ring seal is disposed in a groove extending about the annular face. The other insert, designated the wedge insert, terminates inside the valve body in at least two surfaces oppositely inclined with respect to each other and with respect to a plane normal to the axis of the two inserts. An elongated reciprocable gate, movable between the two inserts along a path normal to the axis of the two inserts, has a first flat face portion disposed adjacent and parallel to the annular face of the seat insert. The gate has a second face portion opposite to the first face portion provided with at least two oppositely inclined surfaces for mating with respective inclined surfaces of the wedge insert. An opening is provided through the gate which registers with a flow passage through the two inserts when the valve is open. Interaction of the respective inclined surfaces of the gate and wedge insert act to force the first flat face portion of the gate against the O-ring seal in the seat insert at the limits of gate displacement where it reaches its respective fully open and fully closed positions.

  3. Conventional versus Transapical Aortic Valve Replacement: Is It Time for Shift in Indications?

    PubMed

    Baumbach, Hardy; Ahad, Samir; Rustenbach, Christian; Hill, Stephan; Schäufele, Tim; Wachter, Kristina; Franke, Ulrich Friedrich Wilhelm

    2016-08-12

    Background The incidence of degenerative aortic valve diseases has increased along with the life expectancy of our population. Although conventional aortic valve replacement (AVR) is the gold standard for symptomatic aortic stenosis, transcatheter procedures have proven to be a valid therapeutic option in high-risk patients. The aim of this study was to compare these procedures in a high-risk cohort. Methods We retrospectively analyzed all symptomatic (dyspnea or angina) high-risk patients (logistic EuroSCORE ≥ 15%) fulfilling the transcatheter aortic valve implantation (TAVI) indications. Most of the AVR patients (n = 180) were operated on before the implementation of TAVI. All TAVI procedures (n = 127) were performed transapically (TA). After matching for age, logistic EuroSCORE, and left ventricular ejection fraction, 82 pairs of patients were evaluated. Results When comparing AVR with TA-TAVI, there was no difference between groups in survival after 1 year (Kaplan-Meier analysis, 81.1% [95% CI: 72.5-89.7%] vs. 75.8% [95% CI: 66.2-75.9%], Log tank p = 0.660) and the complication rates (n for AVR vs. TA-TAVI: stroke, 2 vs. 0, p = 0.580; acute renal insufficiency, 8 vs. 12, p = 0.340; atrial fibrillation, 24 vs. 26, p = 0.813; pacemaker implantation, 4 vs. 4, p > 0.999). In addition, quality of life did not differ between groups. Patients in the TA-TAVI group had lower mean valvular gradients postoperatively compared with the AVR group (14.6 ± 6.6 vs. 10.2 ± 4.9 mm Hg, p < 0.001). Conclusion For high-risk patients, the TAVI procedure is comparable with conventional AVR, but is not advantageous. These results do not support the expansion of TAVI to low- or intermediate-risk patients.

  4. A case of tricuspid valve endocarditis due to Cardiobacterium hominis which emphasizes the shift between the poverty of clinical symptoms and the severity of cardiac damages.

    PubMed

    Molet, Lucie; Revest, Matthieu; Fournet, Maxime; Donal, Erwan; Bonnaure-Mallet, Martine; Minet, Jacques; Le Bars, Hervé

    2016-12-01

    Infectious endocarditis due to Cardiobacterium hominis is an uncommon event, accounting for less than 2% of all cases of infectious endocarditis. The infection of the tricuspid valve as it is reported here is extremely rare. We report the case of a tricuspid endocarditis due to Cardiobacterium hominis in a 56 year-old man who was admitted to hospital with pelvic and scapular pain. The diagnosis was established through positive blood cultures and echographic detection of a large tricuspid vegetation. Despite efficient antibiotic therapy, valve replacement was required. The clinical course of Cardiobacterium endocarditis is usually subacute, and the diagnosis may therefore be delayed. This case emphasizes the shift between the poverty of clinical symptoms and severity of cardiac damages, what we could call the Cardiobacterium paradox.

  5. Aortic valve replacement via right anterolateral thoracotomy in the case of a patient with extreme mediastinal right-shift following pneumonectomy.

    PubMed

    Wilhelmi, Mathias; Rodt, Thomas; Ismail, Issam; Haverich, Axel

    2013-01-25

    We report on the case of a 68-year-old male patient with the history of right pneumonectomy due to bronchial carcinoma, who was referred for aortic valve replacement due to severe calcified aortic stenosis. Pre-operative chest X-ray and computed tomography (CT) revealed an unusually pronounced mediastinal shift to the right. Despite this unusual anatomy, we decided to perform surgery using the right anterolateral thoracotomy following thorough pre-operative planning using 3D-volume rendering of the CT data-set. This approach yielded excellent exposure of the aortic root and the ascending aorta, respectively. Following an uneventful operative and post-operative course the patient could be discharged on post-OP day 6.Although only occasionally described for aortic valve replacement a right anterolateral thoracotomy may represent a valuable surgical approach, particular in patients with unusual anatomy, e.g. a mediastinal right-shift. However, thorough pre-operative planning, i.e. using visualization and planning techniques such as 3D-volume rendering should be mandatory as it provides information crucial to facilitate surgical steps and thus, may help avoid severe surgical complications.

  6. Safety valve

    DOEpatents

    Bergman, Ulf C.

    1984-01-01

    The safety valve contains a resilient gland to be held between a valve seat and a valve member and is secured to the valve member by a sleeve surrounding the end of the valve member adjacent to the valve seat. The sleeve is movable relative to the valve member through a limited axial distance and a gap exists between said valve member and said sleeve.

  7. Engine valve driving apparatus

    SciTech Connect

    Masuda, S.; Uesugi, T.; Oda, H.

    1989-01-03

    An engine valve driving apparatus for an internal combustion engine having a cam driven engine valve is described. It consists of a camshaft rotatable in synchronism with rotation of a crankshaft of an engine and a movable cam member supported by the camshaft for axial movement and prevented from turning relative to the camshaft. The movable cam member can be axially shifted between an operative position wherein the cam member is cooperative with a member of the engine valve so as to cause an operation of the engine valve and an inoperative position wherein the cam member is out of cooperation with the member.

  8. Heart valve surgery - discharge

    MedlinePlus

    ... surgery - minimally invasive Aortic valve surgery - open Bicuspid aortic valve Endocarditis Heart valve surgery Mitral valve prolapse Mitral valve surgery - minimally invasive Mitral valve surgery - open Pulmonary valve stenosis Smoking - tips on how to quit Patient Instructions ...

  9. Check valve

    DOEpatents

    Upton, H.A.; Garcia, P.

    1999-08-24

    A check valve for use in a GDCS of a nuclear reactor and having a motor driven disk including a rotatable armature for rotating the check valve disk over its entire range of motion is described. In one embodiment, the check valve includes a valve body having a coolant flow channel extending therethrough. The coolant flow channel includes an inlet end and an outlet end. A valve body seat is located on an inner surface of the valve body. The check valve further includes a disk assembly, sometimes referred to as the motor driven disc, having a counterweight and a disk shaped valve. The disk valve includes a disk base having a seat for seating with the valve body seat. The disk assembly further includes a first hinge pin member which extends at least partially through the disk assembly and is engaged to the disk. The disk valve is rotatable relative to the first hinge pin member. The check valve also includes a motor having a stator frame with a stator bore therein. An armature is rotatably positioned within the stator bore and the armature is coupled to the disk valve to cause the disk valve to rotate about its full range of motion. 5 figs.

  10. Check valve

    DOEpatents

    Upton, Hubert Allen; Garcia, Pablo

    1999-08-24

    A check valve for use in a GDCS of a nuclear reactor and having a motor driven disk including a rotatable armature for rotating the check valve disk over its entire range of motion is described. In one embodiment, the check valve includes a valve body having a coolant flow channel extending therethrough. The coolant flow channel includes an inlet end and an outlet end. A valve body seat is located on an inner surface of the valve body. The check valve further includes a disk assembly, sometimes referred to as the motor driven disc, having a counterweight and a disk shaped valve. The disk valve includes a disk base having a seat for seating with the valve body seat. The disk assembly further includes a first hinge pin member which extends at least partially through the disk assembly and is engaged to the disk. The disk valve is rotatable relative to the first hinge pin member. The check valve also includes a motor having a stator frame with a stator bore therein. An armature is rotatably positioned within the stator bore and the armature is coupled to the disk valve to cause the disk valve to rotate about its full range of motion.

  11. 3,4-Dimethylphenol

    Integrated Risk Information System (IRIS)

    3,4 - Dimethylphenol ; CASRN 95 - 65 - 8 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarcinogen

  12. Valve Disease

    MedlinePlus

    ... valves in the heart: tricuspid, pulmonary, mitral, and aortic. Two types of problems can disrupt blood flow though the valves: regurgitation or stenosis. Regurgitation is also called insufficiency or incompetence. Regurgitation ...

  13. Fast valve

    DOEpatents

    Van Dyke, W.J.

    1992-04-07

    A fast valve is disclosed that can close on the order of 7 milliseconds. It is closed by the force of a compressed air spring with the moving parts of the valve designed to be of very light weight and the valve gate being of wedge shaped with O-ring sealed faces to provide sealing contact without metal to metal contact. The combination of the O-ring seal and an air cushion create a soft final movement of the valve closure to prevent the fast air acting valve from having a harsh closing. 4 figs.

  14. Fast valve

    DOEpatents

    Van Dyke, William J.

    1992-01-01

    A fast valve is disclosed that can close on the order of 7 milliseconds. It is closed by the force of a compressed air spring with the moving parts of the valve designed to be of very light weight and the valve gate being of wedge shaped with O-ring sealed faces to provide sealing contact without metal to metal contact. The combination of the O-ring seal and an air cushion create a soft final movement of the valve closure to prevent the fast air acting valve from having a harsh closing.

  15. Valve operating system for an automotive engine

    SciTech Connect

    Maeda, S.

    1988-03-15

    In a valve operating system for an automotive engine having two or more intake valves for one cylinder, a camshaft having cams for operating the intake valves, the system is described comprising: one of the cams being rotatably and axially slidably mounted on the camshaft; clutch means for engaging the slidable cam with the camshaft at a predetermined angular position; shifting means for axially shifting the slidable cam to engage the cam with the camshaft by the clutch means.

  16. Piston and valve assembly

    SciTech Connect

    Rolder, G. K.

    1985-10-01

    A downhole hydraulically actuated pump assembly of either the free or fixed type lifts formation fluid from the bottom of a borehole to the surface of the ground. The downhole pump has a power piston which actuates a production plunger. A valve means is concentrically arranged within the power piston. A stationary, hollow valve control rod extends through the power piston and through the valve means, with a lower marginal end of the control rod terminating within the production plunger. Power fluid flows through the control rod and to the valve means. As the power piston reciprocates within the engine cylinder, means on the control rod actuates the valve means between two alternant positions so that power fluid is applied to the bottom face of the power piston to thereby cause the power piston to reciprocate upward; and thereafter, the control rod causes the valve means to shift to the other position, whereupon spent power fluid is exhausted from the engine cylinder. The spent power fluid is admixed with production fluid and is conducted to the surface of the ground.

  17. Depressurization valve

    DOEpatents

    Skoda, G.I.

    1989-03-28

    A depressurization valve for use in relieving completely the pressure in a simplified boiling water reactor is disclosed. The normally closed and sealed valve is provided with a valve body defining a conduit from an outlet of a manifold from the reactor through a valve seat. A closing valve disk is configured for fitting to the valve seat to normally close the valve. The seat below the disk is provided with a radially extending annulus extending a short distance into the aperture defined by the seat. The disk is correspondingly provided with a longitudinally extending annulus that extends downwardly through the aperture defined by the seat towards the high pressure side of the valve body. A ring shaped membrane is endlessly welded to the seat annulus and to the disk annulus. The membrane is conformed over the confronted surface of the seat and disk in a C-sectioned configuration to seal the depressurization valve against the possibility of weeping. The disk is held to the closed position by an elongate stem extending away from the high pressure side of the valve body. The stem has a flange configured integrally to the stem for bias by two springs. The first spring acts from a portion of the housing overlying the disk on the stem flange adjacent the disk. This spring urges the stem and attached disk away from the seat and thus will cause the valve to open at any pressure. A second spring-preferably of the Belleville variety-acts on a latch plate surrounding and freely moving relative to the end of the stem. This second spring overcomes the bias of the first spring and any pressure acting upon the disk. This Belleville spring maintains through its spring force the valve in the closed position. At the same time, the latch plate with its freedom of movement relative to the stem allows the stem to thermally expand during valve temperature excursion.

  18. Problem: Heart Valve Stenosis

    MedlinePlus

    ... valve . Learn about the different types of stenosis: Aortic stenosis Tricuspid stenosis Pulmonary stenosis Mitral stenosis Outlook for ... Disease "Innocent" Heart Murmur Problem: Valve Stenosis - Problem: Aortic Valve Stenosis - Problem: Mitral Valve Stenosis - Problem: Tricuspid Valve Stenosis - ...

  19. Structure elucidation of the designer drug N-(1-amino-3,3-dimethyl-1-oxobutan-2-yl)-1-(5-fluoropentyl)-3-(4-fluorophenyl)-pyrazole-5-carboxamide and the relevance of predicted (13) C NMR shifts - a case study.

    PubMed

    Girreser, Ulrich; Rösner, Peter; Vasilev, Andrej

    2016-07-01

    The detailed structure elucidation process of the new cannabimimetic designer drug, N-(1-amino-3,3-dimethyl-1-oxobutan-2-yl)-1-(5-fluoropentyl)-3-(4-fluorophenyl)-pyrazole-5-carboxamide, with a highly substituted pyrazole skeleton, using nuclear magnetic resonance (NMR) spectroscopic and mass spectrometric (MS) techniques is described. After a first analysis of the NMR spectra and comparison with 48 possible pyrazole and imidazole structures, a subset of six positional isomeric pyrazoles and six imidazoles remained conceivable. Four substituents of the heterocyclic skeleton were identified: a proton bound to a pyrazole ring carbon atom; a 5-fluoropentyl group; a 4-fluorophenyl substituent; and a carbamoyl group, which is N-substituted with a methyl residue carrying a tert.-butyl and a carbamoyl substituent. The 5-fluoropentyl residue is situated at the nitrogen ring atom. Additional NMR experiments like the (1) H,(13) C HMBC were performed, but due to the small number of signals based on long-range couplings, the comparison of predicted and observed (13) C chemical shifts became necessary. The open access Internet shift prediction programs NMRDB, NMRSHIFTDB2, and CSEARCH were employed for the prediction of (13) C shift values which allowed an efficient and unambiguous structure determination. For the identified N-(1-amino-3,3-dimethyl-1-oxobutan-2-yl)-1-(5-fluoropentyl)-3-(4-fluorophenyl)-pyrazole-5-carboxamide, the best agreement between predicted (13) C shifts and the observed chemical shifts and long-range couplings for the pyrazole ring carbon atoms, with a standard error of about 2 ppm, was found with each of the predictions. For the comparison of measured and predicted chemical shifts model compounds with simple substituents proved helpful. The identified compound is a homologue of AZ-037 which is offered by Internet suppliers. Copyright © 2015 John Wiley & Sons, Ltd.

  20. Depressurization valve

    DOEpatents

    Skoda, George I.

    1989-01-01

    A depressurization valve for use in relieving completely the pressure in a simplified boiling water reactor is disclosed. The normally closed and sealed valve is provided with a valve body defining a conduit from an outlet of a manifold from the reactor through a valve seat. A closing valve disk is configured for fitting to the valve seat to normally close the valve. The seat below the disk is provided with a radially extending annulus extending a short distance into the aperture defined by the seat. The disk is correspondingly provided with a longitudinally extending annulus that extends downwardly through the aperture defined by the seat towards the high pressure side of the valve body. A ring shaped membrane is endlessly welded to the seat annulus and to the disk annulus. The membrane is conformed over the confronted surface of the seat and disk in a C-sectioned configuration to seal the depressurization valve against the possibility of weeping. The disk is held to the closed position by an elongate stem extending away from the high pressure side of the valve body. The stem has a flange configured integrally to the stem for bias by two springs. The first spring acts from a portion of the housing overlying the disk on the stem flange adjacent the disk. This spring urges the stem and attached disk away from the seat and thus will cause the valve to open at any pressure. A second spring--preferably of the Belleville variety--acts on a latch plate surrounding and freely moving relative to the end of the stem. This second spring overcomes the bias of the first spring and any pressure acting upon the disk. This Belleville spring maintains through its spring force the valve in the closed position. At the same time, the latch plate with its freedom of movement relative to the stem allows the stem to thermally expand during valve temperature excursion. The latch plate in surrounding the stem is limited in its outward movement by a boss attached to the stem at the end of

  1. Nuclear radiation actuated valve

    DOEpatents

    Christiansen, David W.; Schively, Dixon P.

    1985-01-01

    A nuclear radiation actuated valve for a nuclear reactor. The valve has a valve first part (such as a valve rod with piston) and a valve second part (such as a valve tube surrounding the valve rod, with the valve tube having side slots surrounding the piston). Both valve parts have known nuclear radiation swelling characteristics. The valve's first part is positioned to receive nuclear radiation from the nuclear reactor's fuel region. The valve's second part is positioned so that its nuclear radiation induced swelling is different from that of the valve's first part. The valve's second part also is positioned so that the valve's first and second parts create a valve orifice which changes in size due to the different nuclear radiation caused swelling of the valve's first part compared to the valve's second part. The valve may be used in a nuclear reactor's core coolant system.

  2. Aortic Valve Regurgitation

    MedlinePlus

    ... valve. Also, a narrowing of the aortic valve (aortic stenosis) can be associated with leaking. High blood pressure (hypertension). High blood pressure may stretch the root of the aorta where the aortic valve sits. The valve flaps ( ...

  3. Mitral Valve Disease

    MedlinePlus

    ... Heart Disease Diseases of the arteries, valves, and aorta, as well as cardiac rhythm disturbances Aortic Valve ... are two main types of mitral valve disease: Stenosis – the valve does not open enough to allow ...

  4. A calcified polymeric valve for valve-in-valve applications.

    PubMed

    Falahatpisheh, Ahmad; Morisawa, Daisuke; Toosky, Taraz T; Kheradvar, Arash

    2017-01-04

    The prevalence of aortic valve stenosis (AS) is increasing in the aging society. More recently, novel treatments and devices for AS, especially transcatheter aortic valve replacement (TAVR) have significantly changed the therapeutic approach to this disease. Research and development related to TAVR require testing these devices in the calcified heart valves that closely mimic a native calcific valve. However, no animal model of AS has yet been available. Alternatively, animals with normal aortic valve that are currently used for TAVR experiments do not closely replicate the aortic valve pathology required for proper testing of these devices. To solve this limitation, for the first time, we developed a novel polymeric valve whose leaflets possess calcium hydroxyapatite inclusions immersed in them. This study reports the characteristics and feasibility of these valves. Two types of the polymeric valve, i.e., moderate and severe calcified AS models were developed and tested by deploying a transcatheter valve in those and measuring the related hemodynamics. The valves were tested in a heart flow simulator, and were studied using echocardiography. Our results showed high echogenicity of the polymeric valve, that was correlated to the severity of the calcification. Aortic valve area of the polymeric valves was measured, and the severity of stenosis was defined according to the clinical guidelines. Accordingly, we showed that these novel polymeric valves closely mimic AS, and can be a desired cost-saving solution for testing the performance of the transcatheter aortic valve systems in vitro.

  5. Wear resistant valve

    NASA Technical Reports Server (NTRS)

    Perkins, Gerald S. (Inventor)

    1980-01-01

    A valve which is resistant to wear caused by particles trapped between the valve seat and the valve member or poppet when the valve closes, including an outlet for directing washing fluid at the valve seat and/or sealing face of the poppet and means for supplying pressured fluid to the outlet at the time when the valve is closing.

  6. 49 CFR 236.383 - Valve locks, valves, and valve magnets.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 4 2013-10-01 2013-10-01 false Valve locks, valves, and valve magnets. 236.383... Inspection and Tests § 236.383 Valve locks, valves, and valve magnets. Valve locks on valves of the non-cut-off type shall be tested at least once every three months, and valves and valve magnets shall...

  7. 49 CFR 236.383 - Valve locks, valves, and valve magnets.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Valve locks, valves, and valve magnets. 236.383... Inspection and Tests § 236.383 Valve locks, valves, and valve magnets. Valve locks on valves of the non-cut-off type shall be tested at least once every three months, and valves and valve magnets shall...

  8. 49 CFR 236.383 - Valve locks, valves, and valve magnets.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 4 2014-10-01 2014-10-01 false Valve locks, valves, and valve magnets. 236.383... Inspection and Tests § 236.383 Valve locks, valves, and valve magnets. Valve locks on valves of the non-cut-off type shall be tested at least once every three months, and valves and valve magnets shall...

  9. 49 CFR 236.383 - Valve locks, valves, and valve magnets.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 4 2011-10-01 2011-10-01 false Valve locks, valves, and valve magnets. 236.383... Inspection and Tests § 236.383 Valve locks, valves, and valve magnets. Valve locks on valves of the non-cut-off type shall be tested at least once every three months, and valves and valve magnets shall...

  10. 49 CFR 236.383 - Valve locks, valves, and valve magnets.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 4 2012-10-01 2012-10-01 false Valve locks, valves, and valve magnets. 236.383... Inspection and Tests § 236.383 Valve locks, valves, and valve magnets. Valve locks on valves of the non-cut-off type shall be tested at least once every three months, and valves and valve magnets shall...

  11. Piezoelectric valve

    SciTech Connect

    Petrenko, Serhiy Fedorovich

    2013-01-15

    A motorized valve has a housing having an inlet and an outlet to be connected to a pipeline, a saddle connected with the housing, a turn plug having a rod, the turn plug cooperating with the saddle, and a drive for turning the valve body and formed as a piezoelectric drive, the piezoelectric drive including a piezoelectric generator of radially directed standing acoustic waves, which is connected with the housing and is connectable with a pulse current source, and a rotor operatively connected with the piezoelectric generator and kinematically connected with the rod of the turn plug so as to turn the turn plug when the rotor is actuated by the piezoelectric generator.

  12. Excess flow shutoff valve

    DOEpatents

    Kiffer, Micah S.; Tentarelli, Stephen Clyde

    2016-02-09

    Excess flow shutoff valve comprising a valve body, a valve plug, a partition, and an activation component where the valve plug, the partition, and activation component are disposed within the valve body. A suitable flow restriction is provided to create a pressure difference between the upstream end of the valve plug and the downstream end of the valve plug when fluid flows through the valve body. The pressure difference exceeds a target pressure difference needed to activate the activation component when fluid flow through the valve body is higher than a desired rate, and thereby closes the valve.

  13. 3D Printed Multimaterial Microfluidic Valve

    PubMed Central

    Patrick, William G.; Sharma, Sunanda; Kong, David S.; Oxman, Neri

    2016-01-01

    We present a novel 3D printed multimaterial microfluidic proportional valve. The microfluidic valve is a fundamental primitive that enables the development of programmable, automated devices for controlling fluids in a precise manner. We discuss valve characterization results, as well as exploratory design variations in channel width, membrane thickness, and membrane stiffness. Compared to previous single material 3D printed valves that are stiff, these printed valves constrain fluidic deformation spatially, through combinations of stiff and flexible materials, to enable intricate geometries in an actuated, functionally graded device. Research presented marks a shift towards 3D printing multi-property programmable fluidic devices in a single step, in which integrated multimaterial valves can be used to control complex fluidic reactions for a variety of applications, including DNA assembly and analysis, continuous sampling and sensing, and soft robotics. PMID:27525809

  14. Comparison of dysfunction with mechanical and porcine mitral valve prostheses.

    PubMed

    Magilligan, D J; Oyama, C; Alam, M

    1985-09-01

    We reviewed the incidence of dysfunction of the Smeloff-Cutter mechanical prosthetic valve and the Hancock porcine prosthetic valve in the mitral position. The Smeloff-Cutter valve was implanted from 1966 to 1972; 107 patients were discharged from the hospital and were at risk for dysfunction. Follow-up averaged 10 +/- 0.7 years SD. The Hancock valve was implanted from 1971 through 1984; 473 patients were at risk and follow-up averaged 4.7 +/- 3.4 years SD. Dysfunction of the Smeloff-Cutter valve occurred as thrombosis with incomplete poppet opening in 13 patients. Dysfunction of the Hancock valve occurred as primary tissue failure in 47 patients. At 10 years the freedom from dysfunction of the Smeloff-Cutter valve was 84 +/- 5% SE and that for the Hancock valve was 71 +/- 4% SE (p greater than .06). The mortality associated with dysfunction of the Smeloff-Cutter valve was 46%; mortality associated with dysfunction of the Hancock valve was 15% (p less than .02). At 10 years the Hancock valve had a greater incidence of dysfunction than the Smeloff-Cutter valve but this difference was not statistically significant. The mortality associated with dysfunction of the Smeloff-Cutter valve, however, was three times that associated with dysfunction of the Hancock valve.

  15. Hydrodynamic performance of a prototype bioprosthetic valve derived from the pulmonary valve of Phoca groenlandica.

    PubMed

    Agathos, E Andreas; Shen, Ming; Styrc, Witold; Giannakopoulou, Stamatina; Lachanas, Elias; Tomos, Perikles

    2012-01-01

    Biological valves offer significant advantages over mechanical valves, and for this reason, we studied the possibility of using a new animal source such as that of Phoca groenlandica. Four aortic and four pulmonary leaflets were cut radially and their uniaxial tensile testing was evaluated. Three prototype pulmonary valves of Phoca groenlandica preserved in buffered glutaraldehyde solution 0.625% at pH 7.4 were mounted on a 19, 21, and 27 mm novel support system (stent) with heart shape commissural posts covered with polytetrafluoroethylene. The valves were tested in a steady flow system, the peak pressure gradients (PPGs) were measured, and the effective orifice areas (EOAs) were calculated for the flows of 3, 4, 5, 6, and 8 L/min. There were five different measurements for each flow variant. Aortic and pulmonary leaflets present no statistically significant difference in failure strength (p = 0.93). The PPGs across the valves for the flow of 3, 4, 5, 6, and 8 L/min for all three tested valves were low and the corresponding calculated EOAs were large. The new bioprosthetic valve derived from the pulmonary valve of Phoca groenlandica mounted on this novel support system presented a satisfactory hydrodynamic performance in a steady flow system. More research is needed before it can be considered suitable for human cardiac valve replacement.

  16. ELECTROSTRICTION VALVE

    DOEpatents

    Kippenhan, D.O.

    1962-09-25

    An accurately controlled, pulse gas valve is designed capable of delivering output pulses which vary in length from one-tenth millisecond to one second or more, repeated at intervals of a few milliseconds or- more. The pulsed gas valve comprises a column formed of barium titanate discs mounted in stacked relation and electrically connected in parallel, with means for applying voltage across the discs to cause them to expand and effect a mechanical elongation axially of the column. The column is mounted within an enclosure having an inlet port and an outlet port with an internal seat in communication with the outlet port, such that a plug secured to the end of the column will engage the seat of the outlet port to close the outlet port in response to the application of voltage is regulated by a conventional electronic timing circuit connected to the column. (AEC)

  17. Dump valve

    SciTech Connect

    Webber, J.C.

    1981-06-23

    A swab assembly is provided having a dump valve responsive to fluid pressure and drag which will dump the fluid load should either fluid load or drag or the effect of both fluid load and drag become abnormal. Also if the fluid pressure and/or drag become abnormal, the fluid load on the cup will be released and wash away foreign material causing abnormal drag. When the cup is dumped the pulling capabilities of the wireline truck can concentrate on overcoming the drag. The dump valve opens to wide open position and remains open to dump the fluid to assist in washing away solid materials above the cup. A swab assembly also is provided which with normal drag and an overload, may be pulled relatively slowly, but if pulled too rapidly will result in the load on the swab being dumped to protect the swab assembly and the pulling apparatus from damage. 15 claims.

  18. Mitral Valve Prolapse

    MedlinePlus

    ... Personal Stories Support Network: You're Not Alone Heart Valve Disease Symptoms Dr. Robert Bonow describes the symptoms that may alert you to heart valve disease. Valve Disease Resources Patient Guide: Understanding Your Heart ...

  19. Automatic shutoff valve

    NASA Technical Reports Server (NTRS)

    Hawkins, S. F.; Overbey, C. W.

    1980-01-01

    Cellulose-sponge disk absorbs incoming water and expands with enough force to shut valve. When water recedes, valve opens by squeezing sponge dry to its original size. This direct mechanical action is considered more reliable than solenoid valve.

  20. Mitral Valve Prolapse

    MedlinePlus

    Mitral valve prolapse (MVP) occurs when one of your heart's valves doesn't work properly. The flaps of ... Migraine headaches Chest discomfort Most people who have mitral valve prolapse (MVP) don't need treatment because they ...

  1. Magnetically operated check valve

    NASA Technical Reports Server (NTRS)

    Morris, Brian G. (Inventor); Bozeman, Richard J., Jr. (Inventor)

    1994-01-01

    A magnetically operated check valve is disclosed. The valve is comprised of a valve body and a movable poppet disposed therein. A magnet attracts the poppet to hold the valve shut until the force of fluid flow through the valve overcomes the magnetic attraction and moves the poppet to an unseated, open position. The poppet and magnet are configured and disposed to trap a magnetically attracted particulate and prevent it from flowing to a valve seating region.

  2. Magnetically operated check valve

    NASA Astrophysics Data System (ADS)

    Morris, Brian G.; Bozeman, Richard J., Jr.

    1994-06-01

    A magnetically operated check valve is disclosed. The valve is comprised of a valve body and a movable poppet disposed therein. A magnet attracts the poppet to hold the valve shut until the force of fluid flow through the valve overcomes the magnetic attraction and moves the poppet to an unseated, open position. The poppet and magnet are configured and disposed to trap a magnetically attracted particulate and prevent it from flowing to a valve seating region.

  3. Fluid Shifts

    NASA Technical Reports Server (NTRS)

    Stenger, M.; Hargens, A.; Dulchavsky, S.; Ebert, D.; Lee, S.; Lauriie, S.; Garcia, K.; Sargsyan, A.; Martin, D.; Ribeiro, L.; Lui, J.; Macias, B.; Arbeille, P.; Danielson, R.; Chang, D.; Johnston, S.; Ploutz-Snyder, R.; Smith, S.

    2016-01-01

    ultrasound); (3) vascular dimensions by ultrasound (jugular veins, cerebral and carotid arteries, vertebral arteries and veins, portal vein); (4) vascular dynamics by MRI (head/neck blood flow, cerebrospinal fluid pulsatility); (5) ocular measures (optical coherence tomography, intraocular pressure, 2-dimensional ultrasound including optic nerve sheath diameter, globe flattening, and retina-choroid thickness, Doppler ultrasound of ophthalmic and retinal arteries, and veins); (6) cardiac variables by ultrasound (inferior vena cava, tricuspid flow and tissue Doppler, pulmonic valve, stroke volume, right heart dimensions and function, four-chamber views); and (7) ICP measures (tympanic membrane displacement, distortion-product otoacoustic emissions, and ICP calculated by MRI). On the ground, acute head-down tilt will induce cephalad fluid shifts, whereas LBNP will oppose these shifts. Controlled Mueller maneuvers will manipulate cardiovascular variables. Through interventions applied before, during, and after flight, we intend to fully evaluate the relationship between fluid shifts and the VIIP syndrome.

  4. Fast-Acting Valve

    NASA Technical Reports Server (NTRS)

    Wojciechowski, Bogdan V. (Inventor); Pegg, Robert J. (Inventor)

    2003-01-01

    A fast-acting valve includes an annular valve seat that defines an annular valve orifice between the edges of the annular valve seat, an annular valve plug sized to cover the valve orifice when the valve is closed, and a valve-plug holder for moving the annular valve plug on and off the annular valve seat. The use of an annular orifice reduces the characteristic distance between the edges of the valve seat. Rather than this distance being equal to the diameter of the orifice, as it is for a conventional circular orifice, the characteristic distance equals the distance between the inner and outer radii (for a circular annulus). The reduced characteristic distance greatly reduces the gap required between the annular valve plug and the annular valve seat for the valve to be fully open, thereby greatly reducing the required stroke and corresponding speed and acceleration of the annular valve plug. The use of a valve-plug holder that is under independent control to move the annular valve plug between its open and closed positions is important for achieving controllable fast operation of the valve.

  5. Rotary pneumatic valve

    DOEpatents

    Hardee, Harry C.

    1991-01-01

    A rotary pneumatic valve which is thrust balanced and the pneumatic pressure developed produces only radial loads on the valve cylinder producing negligible resistance and thus minimal torque on the bearings of the valve. The valve is multiplexed such that at least two complete switching cycles occur for each revolution of the cylinder spindle.

  6. Liquid rocket valve components

    NASA Technical Reports Server (NTRS)

    1973-01-01

    A monograph on valves for use with liquid rocket propellant engines is presented. The configurations of the various types of valves are described and illustrated. Design criteria and recommended practices for the various valves are explained. Tables of data are included to show the chief features of valve components in use on operational vehicles.

  7. Remote actuated valve implant

    DOEpatents

    McKnight, Timothy E; Johnson, Anthony; Moise, Jr., Kenneth J; Ericson, Milton Nance; Baba, Justin S; Wilgen, John B; Evans, III, Boyd McCutchen

    2014-02-25

    Valve implant systems positionable within a flow passage, the systems having an inlet, an outlet, and a remotely activatable valve between the inlet and outlet, with the valves being operable to provide intermittent occlusion of the flow path. A remote field is applied to provide thermal or magnetic activation of the valves.

  8. Microfluidic sieve valves

    DOEpatents

    Quake, Stephen R; Marcus, Joshua S; Hansen, Carl L

    2015-01-13

    Sieve valves for use in microfluidic device are provided. The valves are useful for impeding the flow of particles, such as chromatography beads or cells, in a microfluidic channel while allowing liquid solution to pass through the valve. The valves find particular use in making microfluidic chromatography modules.

  9. Dual stage check valve

    NASA Technical Reports Server (NTRS)

    Whitten, D. E. (Inventor)

    1973-01-01

    A dual stage seat valve head arrangement is described which consists of a primary sealing point located between a fixed orifice seat and a valve poppet, and a secondary sealing point between an orifice poppet and a valve poppet. Upstream of the valve orifice is a flexible, convoluted metal diaphragm attached to the orifice poppet. Downstream of the valve orifice, a finger spring exerts a force against the valve poppet, tending to keep the valve in a closed position. The series arrangement of a double seat and poppet is able to tolerate small particle contamination while minimizing chatter by controlling throttling or metering across the secondary seat, thus preserving the primary sealing surface.

  10. Double valve Implantation

    PubMed Central

    Stassano, Paolo; Mannacio, Vito; Musumeci, Antonino; Golino, Alessandro; Maida, Piero; Ferrigno, Vincenzo; Buonocore, Gaetano; Spampinato, Nicola

    1991-01-01

    From January 1976 through December 1987, 194 patients with a mean age of 43.3 ± 13.7 years (range, 11 to 74 years) underwent double (mitral and aortic) replacement of native valves with 8 types of bioprostheses: Carpentier-Edwards, 127 valves; Hancock, 76 valves; Liotta-Bioimplant, 57 valves; Ionescu-Shiley, 53 valves; Vascor, 27 valves; Carpentier-Edwards Pericardial, 22 valves; Angell-Shiley, 20 valves; and Implamedic, 6 valves. Concomitant cardiac procedures were performed in 25 patients (12.8%). There were 18 operative deaths (9.27%). Our retrospective analysis was restricted to 352 bioprostheses implanted in the 176 patients who survived surgery and were considered at risk for valve tissue failure. The overall cumulative duration of follow-up was 1,174.1 patient-years (range, 1 to 13 years). The durations of follow-up for specific valves were: Carpentier-Edwards, 920.2 valve-years; Hancock, 383.8 valve-years; Liotta-Bioimplant, 310.2 valve-years; Ionescu-Shiley, 357.7 valve-years; Vascor, 131.2 valve-years; Carpentier-Edwards Pericardial, 52.0 valve-years; Angell-Shiley, 167.0 valve-years; and Implamedic, 31.0 valve-years. Thirty patients had thromboembolic accidents, for a linearized incidence of 2.5% per patient-year. At 13 years, the actuarial freedom from thromboembolic accidents was 85.8% ± 10.7%. Nine patients had endocarditis, for a linearized incidence of 0.7% per patient-year. At 13 years, the actuarial freedom from endocarditis was 92.0% ± 1.5%. Twenty-four patients had valve tissue failure, for a cumulative linearized incidence of 1.87% per valve-year. The cumulative actuarial probability of freedom from valve tissue failure was 78.6% ± 3.7% at 10 years and 51.2% ± 10.7% at 13 years. The 24 patients with valve tissue failure all underwent reoperation: 20 of these had double valve replacement, 3 had aortic valve replacement alone, and 1 had mitral valve replacement alone. The mean interval between initial valve implantation and reoperation was

  11. Valve-in-Valve Replacement Using a Sutureless Aortic Valve

    PubMed Central

    Dohmen, Pascal M.; Lehmkuhl, Lukas; Borger, Michael A.; Misfeld, Martin; Mohr, Friedrich W.

    2016-01-01

    Patient: Female, 61 Final Diagnosis: Tissue degeneration Symptoms: Dyspnea Medication: — Clinical Procedure: Redo valve replacement Specialty: Surgery Objective: Rare disease Background: We present a unique case of a 61-year-old female patient with homograft deterioration after redo surgery for prosthetic valve endocarditis with root abscess. Case Report: The first operation was performed for type A dissection with root, arch, and elephant trunk replacement of the thoracic aorta. The present re-redo surgery was performed as valve-in-valve with a sutureless aortic biopros-thesis. The postoperative course was uneventful and the patient was discharged on day 6. Conclusions: The current case report demonstrates that sutureless bioprostheses are an attractive option for surgical valve-in-valve procedures, which can reduce morbidity and mortality. PMID:27694795

  12. Vacuum breaker valve assembly

    DOEpatents

    Thompson, Jeffrey L.; Upton, Hubert Allen

    1999-04-27

    Breaker valve assemblies for a simplified boiling water nuclear reactor are described. The breaker valve assembly, in one form, includes a valve body and a breaker valve. The valve body includes an interior chamber, and an inlet passage extends from the chamber and through an inlet opening to facilitate transporting particles from outside of the valve body to the interior chamber. The breaker valve is positioned in the chamber and is configured to substantially seal the inlet opening. Particularly, the breaker valve includes a disk which is sized to cover the inlet opening. The disk is movably coupled to the valve body and is configured to move substantially concentrically with respect to the valve opening between a first position, where the disk completely covers the inlet opening, and a second position, where the disk does not completely cover the inlet opening.

  13. Bellows sealed plug valve

    DOEpatents

    Dukas, Jr., Stephen J.

    1990-01-01

    A bellows sealed plug valve includes a valve body having an inlet passage and an outlet passage, a valve chamber between the inlet and outlet passages. A valve plug has substantially the same shape as the valve chamber and is rotatably disposed therein. A shaft is movable linearly in response to a signal from a valve actuator. A bellows is sealingly disposed between the valve chamber and the valve actuator and means are located between the bellows and the valve plug for converting linear movement of the shaft connected to the valve actuator to rotational movement of the plug. Various means are disclosed including helical thread mechanism, clevis mechanism and rack and pinion mechanism, all for converting linear motion to rotational motion.

  14. Scissor thrust valve actuator

    DOEpatents

    DeWall, Kevin G.; Watkins, John C; Nitzel, Michael E.

    2006-08-29

    Apparatus for actuating a valve includes a support frame and at least one valve driving linkage arm, one end of which is rotatably connected to a valve stem of the valve and the other end of which is rotatably connected to a screw block. A motor connected to the frame is operatively connected to a motor driven shaft which is in threaded screw driving relationship with the screw block. The motor rotates the motor driven shaft which drives translational movement of the screw block which drives rotatable movement of the valve driving linkage arm which drives translational movement of the valve stem. The valve actuator may further include a sensory control element disposed in operative relationship with the valve stem, the sensory control element being adapted to provide control over the position of the valve stem by at least sensing the travel and/or position of the valve stem.

  15. Heart valve surgery - series (image)

    MedlinePlus

    There are four valves in the heart: aortic valve, mitral valve, tricuspid valve, and pulmonary valve. The valves are designed to control the direction of blood flow through the heart. The opening and closing of the heart valves produce the heart-beat sounds.

  16. Magnetically operated check valve

    NASA Astrophysics Data System (ADS)

    Morris, Brian G.; Bozeman, Richard J., Jr.

    1993-03-01

    A magnetically operated check valve is disclosed having, in one aspect, a valve body and a movable poppet disposed therein. A magnet attracts the poppet to hold the valve shut until the force of fluid flow through the valve overcomes the magnetic attraction and moves the poppet to an unseated, open position. The poppet and magnet are configured and disposed to trap a magnetically attracted particulate and prevent it from flowing to a valve seating region.

  17. When a Heart Murmur Signals Valve Disease

    MedlinePlus

    ... Problem: Valve Stenosis - Problem: Aortic Valve Stenosis - Problem: Mitral Valve Stenosis - Problem: Tricuspid Valve Stenosis - Problem: Pulmonary Valve Stenosis Problem: Mitral Valve Prolapse Problem: Heart Valve Regurgitation - Problem: Aortic ...

  18. A thin film nitinol heart valve.

    PubMed

    Stepan, Lenka L; Levi, Daniel S; Carman, Gregory P

    2005-11-01

    In order to create a less thrombogenic heart valve with improved longevity, a prosthetic heart valve was developed using thin film nitinol (NiTi). A "butterfly" valve was constructed using a single, elliptical piece of thin film NiTi and a scaffold made from Teflon tubing and NiTi wire. Flow tests and pressure readings across the valve were performed in vitro in a pulsatile flow loop. Bio-corrosion experiments were conducted on untreated and passivated thin film nitinol. To determine the material's in vivo biocompatibility, thin film nitinol was implanted in pigs using stents covered with thin film NiTi. Flow rates and pressure tracings across the valve were comparable to those through a commercially available 19 mm Perimount Edwards tissue valve. No signs of corrosion were present on thin film nitinol samples after immersion in Hank's solution for one month. Finally, organ and tissue samples explanted from four pigs at 2, 3, 4, and 6 weeks after thin film NiTi implantation appeared without disease, and the thin film nitinol itself was without thrombus formation. Although long term testing is still necessary, thin film NiTi may be very well suited for use in artificial heart valves.

  19. Fast acting check valve

    NASA Technical Reports Server (NTRS)

    Perkins, Gerald S. (Inventor)

    1979-01-01

    A check valve which closes more rapidly to prevent wearing of the valve seat and of the valve member that seals thereagainst, including a solenoid or other actuator that aids the normal spring to quickly close the valve at approximately the time when downpath fluid flow would stop, the actuator then being deenergized. The control circuit that operates the actuator can include a pair of pressure sensors sensing pressure both upstream and downstream from the valve seat. Where the valve is utilized to control flow to or from a piston pump, energization of the actuator can be controlled by sensing when the pump piston reaches its extreme of travel.

  20. Quickly Removable Valve

    NASA Technical Reports Server (NTRS)

    Robbins, John S.

    1988-01-01

    Unit removed with minimal disturbance. Valve inlet and outlet ports adjacent to each other on same side of valve body. Ports inserted into special manifold on fluid line. Valve body attached to manifold by four bolts or, alternatively, by toggle clamps. Electromechanical actuator moves in direction parallel to fluid line to open and close valve. When necessary to clean valve, removed simply by opening bolts or toggle clamps. No need to move or separate ports of fluid line. Valve useful where disturbance of fluid line detrimental or where fast maintenance essential - in oil and chemical industries, automotive vehicles, aircraft, and powerplants.

  1. Ball valve extractor

    DOEpatents

    Herndon, Charles; Brown, Roger A.

    2002-01-01

    An apparatus and process for removing a ball valve is provided. The ball valve removal tool provides a handle sliding along the length of a shaft. One end of the shaft is secured within an interior cavity of a ball valve while the opposite end of the shaft defines a stop member. By providing a manual sliding force to the handle, the handle impacts the stop member and transmits the force to the ball valve. The direction of the force is along the shaft of the removal tool and disengages the ball valve from the ball valve housing.

  2. Fluid Shifts

    NASA Technical Reports Server (NTRS)

    Stenger, Michael; Hargens, A.; Dulchavsky, S.; Ebert, D.; Lee, S.; Sargsyan, A.; Martin, D.; Lui, J.; Macias, B.; Arbeille, P.; Platts, S.

    2014-01-01

    ); (3) vascular dimensions by ultrasound (jugular veins, cerebral and carotid arteries, vertebral arteries and veins, portal vein); (4) vascular dynamics by MRI (head/neck blood flow, cerebrospinal fluid pulsatility); (5) ocular measures (optical coherence tomography, intraocular pressure, 2-dimensional ultrasound including optic nerve sheath diameter, globe flattening, and retina-choroid thickness, Doppler ultrasound of ophthalmic and retinal arteries, and veins); (6) cardiac variables by ultrasound (inferior vena cava, tricuspid flow and tissue Doppler, pulmonic valve, stroke volume, right heart dimensions and function, four-chamber views); and (7) ICP measures (tympanic membrane displacement, distortion-product otoacoustic emissions, and ICP calculated by MRI). On the ground, acute head-down tilt will induce cephalad fluid shifts, whereas LBNP will oppose these shifts. Controlled Mueller maneuvers will manipulate cardiovascular variables. Through interventions applied before, during, and after flight, we intend to fully evaluate the relationship between fluid shifts and the VIIP syndrome. This study has been selected for flight implementation and is one of the candidate investigations being considered for the one year mission.

  3. Living with Heart Valve Disease

    MedlinePlus

    ... page from the NHLBI on Twitter. Living With Heart Valve Disease Heart valve disease is a lifelong condition. However, ... all of your medicines as prescribed. Pregnancy and Heart Valve Disease Mild or moderate heart valve disease during pregnancy ...

  4. Simulation of a Hydraulic Pump Control Valve

    NASA Technical Reports Server (NTRS)

    Molen, G. Vander; Akers, A.

    1987-01-01

    This paper describes the mode of operation of a control valve assembly that is used with a hydraulic pump. The operating system of the valve is modelled in a simplified form, and an analogy for hydraulic resonance of the pressure sensing system is presented. For the control valve investigated, air entrainment, length and diameter of the resonator neck, and valve mass produced the greatest shift in resonant frequency. Experimental work was conducted on the hydraulic system so that the resonance levels and frequencies could be measured and the accuracy of the theory verified. The results obtained make it possible to evaluate what changes to any of the variables considered would be most effective in driving the second harmonic frequency above the operating range.

  5. Valve mechanism having variable valve timing

    SciTech Connect

    Oda, H.; Masuda, S.; Morita, Y.

    1986-04-08

    This patent describes a valve mechanism for an internal combustion engine which consists of a camshaft rotatable about a longitudinal axis and having a cam formed thereon, a swingable member mounted for swinging movement about the longitudinal axis of the camshaft and formed with a tappet receiving hole. A valve tapper is received in the tappet receiving hole for a slidable movement along the tappet receiving hole. The tappet has a cam which engages the surface at one end and a stem engages the surface at the other end. A valve stem is mounted for axial movement and engaged at one end with the stem engaging, surface of the tappet to be actuated thereby. A valve timing control swingably moves the swingable member and the tappet about the camshaft axis in accordance with predetermined engine operating conditions to thereby change valve opening and valve closing timing. The control includes means for holding the swingable member at a first position. The tappet and valve stem are in contact at a first position on the stem engaging surface of the tappet and the direction of the slidable movement of the tappet is aligned with the direction of the axial movement of the valve stem at least under heavy load, high speed engine operation, and for moving the swingable member from the first position to a second position. The tappet and valve stem are in contact at a second position on the stem engaging surface of the tappet at low speed engine operation to effect a change in valve opening and valve closing timing.

  6. Pump isolation valve

    DOEpatents

    Kinney, Calvin L.; Wetherill, Todd M.

    1983-08-02

    The pump isolation valve provides a means by which the pump may be selectively isolated from the remainder of the coolant system while being compatible with the internal hydraulic arrangement of the pump during normal operation of the pump. The valve comprises a valve cylinder disposed around the pump and adjacent to the last pump diffuser with a turning vane attached to the lower end of the valve cylinder in a manner so as to hydraulically match with the discharge diffuser. The valve cylinder is connected to a drive means for sliding the valve cylinder relative to the diffuser support cylinder so as to block flow in either direction through the discharge diffuser when the valve is in the closed position and to aid in the flow of the coolant from the discharge diffuser by means of the turning vane when the valve is in the open position.

  7. Problem: Mitral Valve Regurgitation

    MedlinePlus

    ... Options • Recovery and Healthy Living Goals • Personal Stories Heart Valve Disease Symptoms Dr. Robert Bonow describes the symptoms that may alert you to heart valve disease. Support Network: You're Not Alone Popular Articles ...

  8. Problem: Heart Valve Regurgitation

    MedlinePlus

    ... Options • Recovery and Healthy Living Goals • Personal Stories Heart Valve Disease Symptoms Dr. Robert Bonow describes the symptoms that may alert you to heart valve disease. Support Network: You're Not Alone Popular Articles ...

  9. Aortic Valve Disease

    MedlinePlus

    ... Ventricle Normal Heart Select Disease To Learn More Aortic Stenosis Aortic Insufficiency Aorta The aorta is the main ... the rest of your body. Aortic Valve In aortic stenosis, the aortic valve becomes narrowed and does not ...

  10. Aortic Valve Stenosis

    MedlinePlus

    ... By Mayo Clinic Staff Aortic valve stenosis — or aortic stenosis — occurs when the heart's aortic valve narrows. This ... pressure may prevent or slow the development of aortic stenosis. Ask your doctor if you need to lower ...

  11. Fluid Shifts

    NASA Technical Reports Server (NTRS)

    Stenger, M. B.; Hargens, A. R.; Dulchavsky, S. A.; Arbeille, P.; Danielson, R. W.; Ebert, D. J.; Garcia, K. M.; Johnston, S. L.; Laurie, S. S.; Lee, S. M. C.; Liu, J.; Macias, B.; Martin, D. S.; Minkoff, L.; Ploutz-Snyder, R.; Ribeiro, L. C.; Sargsyan, A.; Smith, S. M.

    2017-01-01

    pulsatility); (5) ocular measures (optical coherence tomography; intraocular pressure; 2-dimensional ultrasound including optic nerve sheath diameter, globe flattening, and retina-choroid thickness; Doppler ultrasound of ophthalmic and retinal arteries and veins); (6) cardiac variables by ultrasound (inferior vena cava, tricuspid flow and tissue Doppler, pulmonic valve, stroke volume, right heart dimensions and function, four-chamber views); and (7) ICP measures (tympanic membrane displacement, otoacoustic emissions). Pre- and post-flight, acute head-down tilt will induce cephalad fluid shifts, whereas lower body negative pressure will oppose these shifts. Controlled Mueller maneuvers will manipulate cardiovascular variables. Through interventions applied before, during, and after flight, we intend to fully evaluate the relationship between fluid shifts and the VIIP syndrome. Discussion. Ten subjects have consented to participate in this experiment, including the recent One-Year Mission crewmembers, who have recently completed R plus180 testing; all other subjects have completed pre-flight testing. Preliminary results from the One-Year Mission crewmembers will be presented, including measures of ocular structure and function, vascular dimensions, fluid distribution, and non-invasive estimates of intracranial pressure.

  12. Stemless Ball Valve

    NASA Technical Reports Server (NTRS)

    Burgess, Robert K.; Yakos, David; Walthall, Bryan

    2012-01-01

    This invention utilizes a new method of opening and closing a ball valve. Instead of rotating the ball with a perpendicular stem (as is the case with standard ball valves), the ball is rotated around a fixed axis by two guide pins. This innovation eliminates the leak point that is present in all standard ball valves due to the penetration of an actuation stem through the valve body. The VOST (Venturi Off-Set-Technology) valve has been developed for commercial applications. The standard version of the valve consists of an off-set venturi flow path through the valve. This path is split at the narrowest portion of the venturi, allowing the section upstream from the venturi to be rotated. As this rotation takes place, the venturi becomes restricted as one face rotates with respect to the other, eventually closing off the flow path. A spring-loaded seal made of resilient material is embedded in the upstream face of the valve, making a leak-proof seal between the faces; thus a valve is formed. The spring-loaded lip seal is the only seal that can provide a class six, or bubble-tight, seal against the opposite face of the valve. Tearing action of the seal by high-velocity gas on this early design required relocation of the seal to the downstream face of the valve. In the stemless embodiment of this valve, inner and outer magnetic cartridges are employed to transfer mechanical torque from the outside of the valve to the inside without the use of a stem. This eliminates the leak path caused by the valve stems in standard valves because the stems penetrate through the bodies of these valves.

  13. Aerodynamic Shutoff Valve

    NASA Technical Reports Server (NTRS)

    Horstman, Raymond H.

    1992-01-01

    Aerodynamic flow achieved by adding fixed fairings to butterfly valve. When valve fully open, fairings align with butterfly and reduce wake. Butterfly free to turn, so valve can be closed, while fairings remain fixed. Design reduces turbulence in flow of air in internal suction system. Valve aids in development of improved porous-surface boundary-layer control system to reduce aerodynamic drag. Applications primarily aerospace. System adapted to boundary-layer control on high-speed land vehicles.

  14. Valve technology: A compilation

    NASA Technical Reports Server (NTRS)

    1971-01-01

    A technical compilation on the types, applications and modifications to certain valves is presented. Data cover the following: (1) valves that feature automatic response to stimuli (thermal, electrical, fluid pressure, etc.), (2) modified valves changed by redesign of components to increase initial design effectiveness or give the item versatility beyond its basic design capability, and (3) special purpose valves with limited application as presented, but lending themselves to other uses with minor changes.

  15. Heart Valve Diseases

    MedlinePlus

    Your heart has four valves. Normally, these valves open to let blood flow through or out of your heart, and then shut to keep it from flowing ... close tightly. It's one of the most common heart valve conditions. Sometimes it causes regurgitation. Stenosis - when ...

  16. Mitral Valve Prolapse

    PubMed Central

    Rosser, Walter W.

    1992-01-01

    The author discusses the pathophysiology of mitral valve prolapse and provides guidelines to identify and treat low-to high-risk mitral valve prolapse. An approach to diagnosing bacterial endocarditis and its prophylaxis are also discussed. The author reviews mitral valve prolapse syndrome and the risk of sudden death.

  17. Double-Poppet Valve

    NASA Technical Reports Server (NTRS)

    Huber, W. C.

    1984-01-01

    New valve design includes two poppet/seat combinations actuated simultaneously. If one fails, other continues to seal against fluid flow. Valve primarily useful for handling dangerous fluids and lighter and more compact than comparable redundant-valve systems used at present.

  18. Liquid rocket valve assemblies

    NASA Technical Reports Server (NTRS)

    1973-01-01

    The design and operating characteristics of valve assemblies used in liquid propellant rocket engines are discussed. The subjects considered are as follows: (1) valve selection parameters, (2) major design aspects, (3) design integration of valve subassemblies, and (4) assembly of components and functional tests. Information is provided on engine, stage, and spacecraft checkout procedures.

  19. Dump valve assembly

    DOEpatents

    Owen, T.J.

    1984-01-01

    A dump valve assembly comprising a body having a bore defined by a tapered wall and a truncated spherical valve member adapted to seat along a spherical surface portion thereof against said tapered wall. Means are provided for pivoting said valve member between a closed position engagable with said tapered wall and an open position disengaged therefrom.

  20. Well safety valve

    SciTech Connect

    Vinzant, M.B.; Hilts, R.L.; Meaders, M.; Speegle, S.C.

    1984-07-24

    A retrievable well safety valve in a cased well system including a tubing string, a dual packer downhole around the tubing sealing with the casing and submersible pump in the tubing string below the packer. The safety valve controls flow of pumped fluids through the tubing to surface and directs gas flow into the casing annulus above the packer. When the safety valve is landed in cooperating tubing nipples above the packer, separated central annular flow passages are formed for pumped fluids and gas respectively. A ball valve in the central flow passage controls pumped fluid flow therethrough and an annular valve coupled to the ball valve controls gas flow from below the packer through the annular flow passage around and by the ball valve. When the ball valve is in the down and open position, the valve ball member engages a lower seat, which maintains the central and annular flow passages separate and prevents comingling flow of fluids and gas. The coupled valves are held open by pressured fluid from surface and are closed automatically on loss of pressure in their control fluid circuits. When the valves close, a circuit of flow passages for recirculating pumped fluids and gas are opened below the ball valve and the pump may continue operation without overload.

  1. Microblower assisted barometric valve

    DOEpatents

    Rossabi, Joseph; Hyde, Warren K.; Riha, Brian D.; Jackson, Dennis G.; Sappington, Frank

    2005-12-06

    A gas exchange apparatus is provided which provides for both passive fluid flow and blower associated fluid flow through a barometric valve. A battery powered blower is provided which allows for operation of the barometric valve during times when the barometric valve would otherwise be closed, and provides for enhanced volume of gas exchange.

  2. Lock For Valve Stem

    NASA Technical Reports Server (NTRS)

    Burley, Richard K.; Guirguis, Kamal S.

    1991-01-01

    Simple, cheap device locks valve stem so its setting cannot be changed by unauthorized people. Device covers valve stem; cover locked in place with standard padlock. Valve lock made of PVC pipe and packing band. Shears, drill or punch, and forming rod only tools needed.

  3. How Is Mitral Valve Prolapse Treated?

    MedlinePlus

    ... page from the NHLBI on Twitter. How Is Mitral Valve Prolapse Treated? Most people who have mitral valve ... all hospitals offer this method. Valve Repair and Valve Replacement In mitral valve surgery, the valve is repaired or replaced. ...

  4. Plan Turbines 3 & 4, Side View Turbines ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Plan - Turbines 3 & 4, Side View - Turbines 3 & 4, Section A-A - American Falls Water, Power & Light Company, Island Power Plant, Snake River, below American Falls Dam, American Falls, Power County, ID

  5. 32 CFR 3.4 - Definitions.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 32 National Defense 1 2010-07-01 2010-07-01 false Definitions. 3.4 Section 3.4 National Defense..., GRANTS, OR COOPERATIVE AGREEMENTS FOR PROTOTYPE PROJECTS § 3.4 Definitions. Agency point of contact (POC... organization reporting directly to a home office, usually identified with responsibility for profit...

  6. Main Oxidizer Valve Design

    NASA Technical Reports Server (NTRS)

    Addona, Brad; Eddleman, David

    2015-01-01

    A developmental Main Oxidizer Valve (MOV) was designed by NASA-MSFC using additive manufacturing processes. The MOV is a pneumatically actuated poppet valve to control the flow of liquid oxygen to an engine's injector. A compression spring is used to return the valve to the closed state when pneumatic pressure is removed from the valve. The valve internal parts are cylindrical in shape, which lends itself to traditional lathe and milling operations. However, the valve body represents a complicated shape and contains the majority of the mass of the valve. Additive manufacturing techniques were used to produce a part that optimized mass and allowed for design features not practical with traditional machining processes.

  7. CAM operated fuel valve

    SciTech Connect

    Kelly, S.T.; Katchka, J.R.

    1991-09-03

    This patent describes improvement in a fuel control valve construction comprising a housing means having an inlet means adapted to be interconnected to a fuel source and a main outlet means adapted to be interconnected to a main burner means, the housing means having a main valve seat for interconnecting the inlet means with the main outlet means, the housing means having a movable main valve member for opening and closing the main valve seat, the housing means having a movable lever operatively associated with the main valve member and having a manually operable actuator means for controlling the operating positions of the lever, the lever having an intermediate cam follower portion and opposed ends disposed on each side of the cam follower portion with one end of the opposed ends being pivotally mounted to the housing means and with the other end of the opposed ends for operating the main valve member, the housing means having biasing means operatively interconnected to the lever to tend to pivot the lever in one direction that opens the main valve member away from its the main valve seat. The improvement comprises; the housing means has a thermostatically controlled means that is operatively associated with the lever and is adapted to engage and hold the lever in a position wherein the main valve member is in a closed condition against its the main valve seat when the thermostatically controlled means is in one operating condition thereof and the actuator means is in the on condition thereof.

  8. Valve selection in aortic valve endocarditis

    PubMed Central

    Zubrytska, Yana

    2016-01-01

    Aortic prosthetic valve endocarditis (PVE) is a potentially life-threatening disease. Mortality and incidence of infective endocarditis have been reduced in the past 30 years. Medical treatment of aortic PVE may be successful in patients who have a prompt response after antibiotic treatment and who do not have prosthetic dysfunction. In advanced stages, antibiotic therapy alone is insufficient to control the disease, and surgical intervention is necessary. Surgical treatment may be lifesaving, but it is still associated with considerable morbidity and mortality. The aim of surgery is to perform a radical excision of all infected and necrotic tissue, reconstruction of the left ventricle outflow tract, and replacement of the aortic valve. There is no unanimous consensus on which is the optimal prosthesis to implant in this context, and several surgical techniques have been suggested. We aim to analyze the efficacy of the surgical treatment and discuss the issue of valve selection in patients with aortic valve endocarditis. PMID:27785132

  9. Guide to prosthetic cardiac valves

    SciTech Connect

    Morse, D.; Steiner, R.M.; Fernandez, J.

    1985-01-01

    This book contains 10 chapters. Some of the chapter titles are: The development of artificial heart valves: Introduction and historical perspective; The radiology of prosthetic heart valves; The evaluation of patients for prosthetic valve implantation; Pathology of cardiac valve replacement; and Bioengineering of mechanical and biological heart valve substitutes.

  10. What Is Heart Valve Disease?

    MedlinePlus

    ... flow properly. Acquired heart valve disease usually involves aortic or mitral valves. Although the valves are normal at first, problems develop over time. Both congenital and acquired heart valve disease can cause stenosis or backflow. Outlook Many people have heart valve ...

  11. Cryogenic Cam Butterfly Valve

    NASA Technical Reports Server (NTRS)

    McCormack, Kenneth J. (Inventor)

    2016-01-01

    A cryogenic cam butterfly valve has a body that includes an axially extending fluid conduit formed there through. A disc lug is connected to a back side of a valve disc and has a circular bore that receives and is larger than a cam of a cam shaft. The valve disc is rotatable for a quarter turn within the body about a lug axis that is offset from the shaft axis. Actuating the cam shaft in the closing rotational direction first causes the camming side of the cam of the cam shaft to rotate the disc lug and the valve disc a quarter turn from the open position to the closed position. Further actuating causes the camming side of the cam shaft to translate the valve disc into sealed contact with the valve seat. Opening rotational direction of the cam shaft reverses these motions.

  12. Minimally invasive valve surgery.

    PubMed

    Woo, Y Joseph; Seeburger, Joerg; Mohr, Friedrich W

    2007-01-01

    As alternatives to standard sternotomy, surgeons have developed innovative, minimally invasive approaches to conducting valve surgery. Through very small skin incisions and partial upper sternal division for aortic valve surgery and right minithoracotomy for mitral surgery, surgeons have become adept at performing complex valve procedures. Beyond cosmetic appeal, apparent benefits range from decreased pain and bleeding to improved respiratory function and recovery time. The large retrospective studies and few small prospective randomized studies are herein briefly summarized. The focus is then directed toward describing specific intraoperative technical details in current clinical use, covering anesthetic preparation, incision, mediastinal access, cardiovascular cannulation, valve exposure, and valve reconstruction. Finally, unique situations such as pulmonic valve surgery, reoperations, beating heart surgery, and robotics are discussed.

  13. Intelligent Flow Control Valve

    NASA Technical Reports Server (NTRS)

    Kelley, Anthony R (Inventor)

    2015-01-01

    The present invention is an intelligent flow control valve which may be inserted into the flow coming out of a pipe and activated to provide a method to stop, measure, and meter flow coming from the open or possibly broken pipe. The intelligent flow control valve may be used to stop the flow while repairs are made. Once repairs have been made, the valve may be removed or used as a control valve to meter the amount of flow from inside the pipe. With the addition of instrumentation, the valve may also be used as a variable area flow meter and flow controller programmed based upon flowing conditions. With robotic additions, the valve may be configured to crawl into a desired pipe location, anchor itself, and activate flow control or metering remotely.

  14. JenaValve.

    PubMed

    Treede, Hendrik; Rastan, Ardawan; Ferrari, Markus; Ensminger, Stephan; Figulla, Hans-Reiner; Mohr, Friedrich-Wilhelm

    2012-09-01

    The JenaValve is a next-generation TAVI device which consists of a well-proven porcine root valve mounted on a low-profile nitinol stent. Feeler guided positioning and clip fixation on the diseased leaflets allow for anatomically correct implantation of the device without rapid pacing. Safety and efficacy of transapical aortic valve implantation using the JenaValve were evaluated in a multicentre prospective study that showed good short and midterm results. The valve was CE-mark released in Europe in September 2011. A post-market registry ensures on-going and prospective data collection in "real-world" patients. The transfemoral JenaValve delivery system will be evaluated in a first-in-man study in the near future.

  15. Aortic or Mitral Valve Replacement With the Biocor and Biocor Supra

    ClinicalTrials.gov

    2016-03-09

    Aortic Valve Insufficiency; Aortic Valve Regurgitation; Aortic Valve Stenosis; Aortic Valve Incompetence; Mitral Valve Insufficiency; Mitral Valve Regurgitation; Mitral Valve Stenosis; Mitral Valve Incompetence

  16. [Modern mitral valve surgery].

    PubMed

    Bothe, W; Beyersdorf, F

    2016-04-01

    At the beginning of the 20th century, Cutler and Levine performed the first successful surgical treatment of a stenotic mitral valve, which was the only treatable heart valve defect at that time. Mitral valve surgery has evolved significantly since then. The introduction of the heart-lung machine in 1954 not only reduced the surgical risk, but also allowed the treatment of different mitral valve pathologies. Nowadays, mitral valve insufficiency has become the most common underlying pathomechanism of mitral valve disease and can be classified into primary and secondary mitral insufficiency. Primary mitral valve insufficiency is mainly caused by alterations of the valve (leaflets and primary order chords) itself, whereas left ventricular dilatation leading to papillary muscle displacement and leaflet tethering via second order chords is the main underlying pathomechanism for secondary mitral valve regurgitation. Valve reconstruction using the "loop technique" plus annuloplasty is the surgical strategy of choice and normalizes life expectancy in patients with primary mitral regurgitation. In patients with secondary mitral regurgitation, implanting an annuloplasty is not superior to valve replacement and results in high rates of valve re-insufficiency (up to 30 % after 3 months) due to ongoing ventricular dilatation. In order to improve repair results in these patients, we add a novel subvalvular technique (ring-noose-string) to the annuloplasty that aims to prevent ongoing ventricular remodeling and re-insufficiency. In modern mitral surgery, a right lateral thoracotomy is the approach of choice with excellent repair and cosmetic results.

  17. Passively actuated valve

    SciTech Connect

    Modro, S. Michael; Ougouag, Abderrafi M.

    2005-09-20

    A passively actuated valve for isolating a high pressure zone from a low pressure zone and discontinuing the isolation when the pressure in the high pressure zone drops below a preset threshold. If the pressure in the high pressure zone drops below the preset threshold, the valve opens and allows flow from the high pressure zone to the low pressure zone. The valve remains open allowing pressure equalization and back-flow should a pressure inversion between the two pressure zone occur.

  18. Transventricular mitral valve operations.

    PubMed

    Joseph Woo, Y; McCormick, Ryan C

    2011-10-01

    We report transventricular mitral valve operations in 2 patients with severe mitral regurgitation and postinfarction left ventricular rupture and pseudoaneurysm. The first patient had direct papillary muscle involvement necessitating replacement of the mitral valve. The second patient had indirect mitral involvement allowing for placement of an atrial mitral annuloplasty ring via the left ventricle. Both patients showed no mitral valve regurgitation after replacement or repair and had uneventful postoperative recoveries. These cases demonstrate a feasible, alternative, transventricular approach to mitral valve replacement and repair.

  19. Compact gate valve

    DOEpatents

    Bobo, Gerald E.

    1977-01-01

    This invention relates to a double-disc gate valve which is compact, comparatively simple to construct, and capable of maintaining high closing pressures on the valve discs with low frictional forces. The valve casing includes axially aligned ports. Mounted in the casing is a sealed chamber which is pivotable transversely of the axis of the ports. The chamber contains the levers for moving the valve discs axially, and an actuator for the levers. When an external drive means pivots the chamber to a position where the discs are between the ports and axially aligned therewith, the actuator for the levers is energized to move the discs into sealing engagement with the ports.

  20. Magnetic Check Valve

    NASA Technical Reports Server (NTRS)

    Morris, Brian G.; Bozeman, Richard J., Jr.

    1994-01-01

    Poppet in proposed check valve restored to closed condition by magnetic attraction instead of spring force. Oscillations suppressed, with consequent reduction of wear. Stationary magnetic disk mounted just upstream of poppet, also containing magnet. Valve body nonmagnetic. Forward pressure or flow would push poppet away from stationary magnetic disk so fluid flows easily around poppet. Stop in valve body prevents poppet from being swept away. When flow stopped or started to reverse, magnetic attraction draws poppet back to disk. Poppet then engages floating O-ring, thereby closing valve and preventing reverse flow. Floating O-ring facilitates sealing at low loads.

  1. Solid handling valve

    DOEpatents

    Williams, William R.

    1979-01-01

    The present invention is directed to a solids handling valve for use in combination with lock hoppers utilized for conveying pulverized coal to a coal gasifier. The valve comprises a fluid-actuated flow control piston disposed within a housing and provided with a tapered primary seal having a recessed seat on the housing and a radially expandable fluid-actuated secondary seal. The valve seals are highly resistive to corrosion, erosion and abrasion by the solids, liquids, and gases associated with the gasification process so as to minimize valve failure.

  2. Modeling the Mitral Valve

    NASA Astrophysics Data System (ADS)

    Kaiser, Alexander

    2016-11-01

    The mitral valve is one of four valves in the human heart. The valve opens to allow oxygenated blood from the lungs to fill the left ventricle, and closes when the ventricle contracts to prevent backflow. The valve is composed of two fibrous leaflets which hang from a ring. These leaflets are supported like a parachute by a system of strings called chordae tendineae. In this talk, I will describe a new computational model of the mitral valve. To generate geometry, general information comes from classical anatomy texts and the author's dissection of porcine hearts. An MRI image of a human heart is used to locate the tips of the papillary muscles, which anchor the chordae tendineae, in relation to the mitral ring. The initial configurations of the valve leaflets and chordae tendineae are found by solving solving an equilibrium elasticity problem. The valve is then simulated in fluid (blood) using the immersed boundary method over multiple heart cycles in a model valve tester. We aim to identify features and mechanisms that influence or control valve function. Support from National Science Foundation, Graduate Research Fellowship Program, Grant DGE 1342536.

  3. What Causes Heart Valve Disease?

    MedlinePlus

    ... page from the NHLBI on Twitter. What Causes Heart Valve Disease? Heart conditions and other disorders, age-related changes, ... valve disease. Other Conditions and Factors Linked to Heart Valve Disease Many other conditions and factors are linked to ...

  4. Options for Heart Valve Replacement

    MedlinePlus

    ... which may include human or animal donor tissue) Ross Procedure — “Borrowing” your healthy valve and moving it ... Considerations for Surgery Medications Valve Repair Valve Replacement - Ross Procedure - Newer Surgery Options - What is TAVR? - Types ...

  5. 38 CFR 3.4 - Compensation.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 1 2012-07-01 2012-07-01 false Compensation. 3.4 Section..., Compensation, and Dependency and Indemnity Compensation General § 3.4 Compensation. (a) Compensation. This term...) Disability compensation. (1) Basic entitlement for a veteran exists if the veteran is disabled as the...

  6. 38 CFR 3.4 - Compensation.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 1 2011-07-01 2011-07-01 false Compensation. 3.4 Section..., Compensation, and Dependency and Indemnity Compensation General § 3.4 Compensation. (a) Compensation. This term...) Disability compensation. (1) Basic entitlement for a veteran exists if the veteran is disabled as the...

  7. 38 CFR 3.4 - Compensation.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 1 2014-07-01 2014-07-01 false Compensation. 3.4 Section..., Compensation, and Dependency and Indemnity Compensation General § 3.4 Compensation. (a) Compensation. This term...) Disability compensation. (1) Basic entitlement for a veteran exists if the veteran is disabled as the...

  8. 38 CFR 3.4 - Compensation.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 1 2013-07-01 2013-07-01 false Compensation. 3.4 Section..., Compensation, and Dependency and Indemnity Compensation General § 3.4 Compensation. (a) Compensation. This term...) Disability compensation. (1) Basic entitlement for a veteran exists if the veteran is disabled as the...

  9. 38 CFR 3.4 - Compensation.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 1 2010-07-01 2010-07-01 false Compensation. 3.4 Section..., Compensation, and Dependency and Indemnity Compensation General § 3.4 Compensation. (a) Compensation. This term...) Disability compensation. (1) Basic entitlement for a veteran exists if the veteran is disabled as the...

  10. Valve mechanisms for at least two simultaneously actuable valves

    SciTech Connect

    Heimburg, F.

    1989-02-21

    This patent describes a valve gear for at least two valves of an internal combustion engine to be operated simultaneously on longitudinal axes, wherein the valve gear comprises a thrust device which is common to all valves and displaceable on an axis by a cam shaft and against which the valves abut by their valve stems to that displacement of the thrust device causes corresponding displacement of the valves, characterized in that the camshaft includes a single cam that is seated on the thrust device eccentrically relative to its axis causing rotation of the thrust device about its axis. When the thrust device is displaced, the thrust device is axially symmetrical, and the valve stems each abut against the thrust device at positions centered on points offset from the longitudinal axes of the valves causing rotation of the valves about their longitudinal axis when the valves are displaced.

  11. Understanding Heart Valve Problems and Causes

    MedlinePlus

    ... affecting the aortic valve, and can lead to aortic stenosis . Mediastinal radiation therapy (radiation to the chest) – Studies ... Disease "Innocent" Heart Murmur Problem: Valve Stenosis - Problem: Aortic Valve Stenosis - Problem: Mitral Valve Stenosis - Problem: Tricuspid Valve Stenosis - ...

  12. How Is Heart Valve Disease Treated?

    MedlinePlus

    ... and replacing it with a man-made or biological valve. Biological valves are made from pig, cow, or human ... the valve. Man-made valves last longer than biological valves and usually don’t have to be ...

  13. Temperature-Operated Valve

    NASA Technical Reports Server (NTRS)

    Morrison, Andrew D.

    1994-01-01

    Bimetallic valve stem positions orifice at end of inner pipe orifice so liquid flows to outlet when temperature lies within small range of preset value. If liquid too cold or too hot, orifices misaligned and liquid returned to source. Such as in shower, valve prevents outflow of dangerously hot or uncomfortably cold water.

  14. Heimlich valve and pneumothorax.

    PubMed

    Gogakos, Apostolos; Barbetakis, Nikolaos; Lazaridis, George; Papaiwannou, Antonis; Karavergou, Anastasia; Lampaki, Sofia; Baka, Sofia; Mpoukovinas, Ioannis; Karavasilis, Vasilis; Kioumis, Ioannis; Pitsiou, Georgia; Katsikogiannis, Nikolaos; Tsakiridis, Kosmas; Rapti, Aggeliki; Trakada, Georgia; Zissimopoulos, Athanasios; Tsirgogianni, Katerina; Zarogoulidis, Konstantinos; Zarogoulidis, Paul

    2015-03-01

    The Heimlich valve is a small one-way valve used for chest drainage that empties into a flexible collection device and prevents return of gases or fluids into the pleural space. The Heimlich valve is less than 13 cm (5 inches) long and facilitates patient ambulation. Currently there are several systems in the market. It can be used in many patients instead of a traditional water seal drainage system. The Heimlich chest drainage valve was developed so that the process of draining the pleural cavity could be accomplished in a safe, relatively simple, and efficient manner. This valve system has replaced the cumbersome underwater drainage bottle system. Moreover; the Heimlich valve system connects to chest tubing and allows fluid and air to pass in one direction only. This system functions in any position, and it does not ever need to be clamped, a regulated suction can be attached to it if necessary. The valve drains into a plastic bag that can be held at any level, allowing the patient undergoing chest drainage to be ambulatory simply by carrying the bag. In the current mini review we will present the Heimlich valve system and method of insertion.

  15. Mitral valve surgery - open

    MedlinePlus

    ... Saunders; 2012:chap 61. Otto CM, Bonow RO. Valvular heart disease. In: Mann DL, Zipes DP, Libby P, Bonow ... Editorial team. Related MedlinePlus Health Topics Heart Surgery Heart Valve Diseases Mitral Valve Prolapse Browse the Encyclopedia A.D. ...

  16. Minimally invasive valve surgery.

    PubMed

    Woo, Y Joseph

    2009-08-01

    Traditional cardiac valve replacement surgery is being rapidly supplanted by innovative, minimally invasive approaches toward the repair of these valves. Patients are experiencing benefits ranging from less bleeding and pain to faster recovery and greater satisfaction. These operations are proving to be safe, highly effective, and durable, and their use will likely continue to increase and become even more widely applicable.

  17. Linear motion valve

    NASA Technical Reports Server (NTRS)

    Chandler, J. A. (Inventor)

    1985-01-01

    The linear motion valve is described. The valve spool employs magnetically permeable rings, spaced apart axially, which engage a sealing assembly having magnetically permeable pole pieces in magnetic relationship with a magnet. The gap between the ring and the pole pieces is sealed with a ferrofluid. Depletion of the ferrofluid is minimized.

  18. Valve for abrasive material

    DOEpatents

    Gardner, Harold S.

    1982-01-01

    A ball valve assembly for controlling the flow of abrasive particulates including an enlarged section at the bore inlet and an enlarged section at the bore outlet. A refractory ceramic annular deflector is positioned in each of the enlarged sections, substantially extending the useful life of the valve.

  19. Heimlich valve and pneumothorax

    PubMed Central

    Gogakos, Apostolos; Barbetakis, Nikolaos; Lazaridis, George; Papaiwannou, Antonis; Karavergou, Anastasia; Lampaki, Sofia; Baka, Sofia; Mpoukovinas, Ioannis; Karavasilis, Vasilis; Kioumis, Ioannis; Pitsiou, Georgia; Katsikogiannis, Nikolaos; Tsakiridis, Kosmas; Rapti, Aggeliki; Trakada, Georgia; Zissimopoulos, Athanasios; Tsirgogianni, Katerina; Zarogoulidis, Konstantinos

    2015-01-01

    The Heimlich valve is a small one-way valve used for chest drainage that empties into a flexible collection device and prevents return of gases or fluids into the pleural space. The Heimlich valve is less than 13 cm (5 inches) long and facilitates patient ambulation. Currently there are several systems in the market. It can be used in many patients instead of a traditional water seal drainage system. The Heimlich chest drainage valve was developed so that the process of draining the pleural cavity could be accomplished in a safe, relatively simple, and efficient manner. This valve system has replaced the cumbersome underwater drainage bottle system. Moreover; the Heimlich valve system connects to chest tubing and allows fluid and air to pass in one direction only. This system functions in any position, and it does not ever need to be clamped, a regulated suction can be attached to it if necessary. The valve drains into a plastic bag that can be held at any level, allowing the patient undergoing chest drainage to be ambulatory simply by carrying the bag. In the current mini review we will present the Heimlich valve system and method of insertion. PMID:25861609

  20. Space Vehicle Valve System

    NASA Technical Reports Server (NTRS)

    Kelley, Anthony R. (Inventor); Lindner, Jeffrey L. (Inventor)

    2014-01-01

    The present invention is a space vehicle valve system which controls the internal pressure of a space vehicle and the flow rate of purged gases at a given internal pressure and aperture site. A plurality of quasi-unique variable dimension peaked valve structures cover the purge apertures on a space vehicle. Interchangeable sheet guards configured to cover valve apertures on the peaked valve structure contain a pressure-activated surface on the inner surface. Sheet guards move outwardly from the peaked valve structure when in structural contact with a purge gas stream flowing through the apertures on the space vehicle. Changing the properties of the sheet guards changes the response of the sheet guards at a given internal pressure, providing control of the flow rate at a given aperture site.

  1. ULTRA HIGH VACUUM VALVE

    DOEpatents

    Fry, W.A.

    1962-05-29

    A valve for high vacuum applications such as the CStellarator where chamber pressures as low as 2 x 10/sup -10/ mm Hg are necessary is designed with a line-of-sight path through the valve for visual inspection of the contents of reactants in such chambers. The valve comprises a turnable resilient metal ball having an aperture therethrough, means for selectively turning the ball to rotate the axis of its line-of-sight path, and soft, deformable opposing orifices that are movable relatively toward said ball to seal with opposite ball surfaces upon said movement of said axis of said line-of-sight path. The valve also includes a bellows seal connected between said orifices and internal actuating means that eliminates the requirement for gasketed turnable valve closing stems. (AEC)

  2. Boston Scientific Lotus valve.

    PubMed

    Meredith, Ian T; Hood, Kristin L; Haratani, Nicole; Allocco, Dominic J; Dawkins, Keith D

    2012-09-01

    As a result of recent randomised controlled trials and registry observations, transcatheter aortic valve replacement (TAVR) enjoys growing appeal for the treatment of patients at high or extreme risk from surgical aortic valve replacement. However, the current technologies and techniques have important limitations, including risk of stroke, vascular complications and paravalvular aortic regurgitation, which may in turn influence survival. While careful patient selection and screening may improve outcomes, new valve designs and iterations are required. The Lotus aortic valve replacement system is a new fully repositionable device designed to facilitate more precise delivery and minimise paravalvular regurgitation. The safety and efficacy of the Lotus valve are being studied systematically in the REPRISE clinical trial programme.

  3. Intermittent stuck valve after aortic valve replacement with a mechanical valve

    PubMed Central

    Luo, Wenzong; Wang, Xinxin; Li, Jing; Mu, Yun; Ni, Yiming

    2017-01-01

    Abstract Background: Intermittent stuck valve after mechanical valve replacement surgery is a very rare and severe complication. Case summary: We present 1 case of a 53-year-old woman after aortic valve replacement for severe aortic valve stenosis combined with hypertrophy septum. She was diagnosed with intermittent stuck valve only 1 day after surgery by clinical symptoms, intraoperative transoesophageal echocardiogram, and intraoperative findings. Conclusions: Although indications for concomitant myectomy during aortic valve replacement are not clear, we recommend myectomy to prevent stuck valve after St Jude Medical Regent prosthesis replacement for severe aortic valve stenosis combined with hypertrophy septum. PMID:28248877

  4. Face-Sealing Butterfly Valve

    NASA Technical Reports Server (NTRS)

    Tervo, John N.

    1992-01-01

    Valve plate made to translate as well as rotate. Valve opened and closed by turning shaft and lever. Interactions among lever, spring, valve plate, and face seal cause plate to undergo combination of translation and rotation so valve plate clears seal during parts of opening and closing motions.

  5. Sliding-gate valve

    DOEpatents

    Usnick, George B.; Ward, Gene T.; Blair, Henry O.; Roberts, James W.; Warner, Terry N.

    1979-01-01

    This invention is a novel valve of the slidable-gate type. The valve is designed especially for long-term use with highly abrasive slurries. The sealing surfaces of the gate are shielded by the valve seats when the valve is fully open or closed, and the gate-to-seat clearance is swept with an inflowing purge gas while the gate is in transit. A preferred form of the valve includes an annular valve body containing an annular seat assembly defining a flow channel. The seat assembly comprises a first seat ring which is slidably and sealably mounted in the body, and a second seat ring which is tightly fitted in the body. These rings cooperatively define an annular gap which, together with passages in the valve body, forms a guideway extending normal to the channel. A plate-type gate is mounted for reciprocation in the guideway between positions where a portion of the plate closes the channel and where a circular aperture in the gate is in register with the channel. The valve casing includes opposed chambers which extend outwardly from the body along the axis of the guideway to accommodate the end portions of the gate. The chambers are sealed from atmosphere; when the gate is in transit, purge gas is admitted to the chambers and flows inwardly through the gate-to-seat-ring, clearance, minimizing buildup of process solids therein. A shaft reciprocated by an external actuator extends into one of the sealed chambers through a shaft seal and is coupled to an end of the gate. Means are provided for adjusting the clearance between the first seat ring and the gate while the valve is in service.

  6. Long life valve design concepts

    NASA Technical Reports Server (NTRS)

    Jones, J. R.; Hall, A. H., Jr.

    1975-01-01

    Valve concept evaluation, final candidate selection, design, manufacture, and demonstration testing of a pneumatically actuated 10-inch hybrid poppet butterfly shutoff valve are presented. Conclusions and recommendations regarding those valve characteristics and features which would serve to guide in the formulation of future valve procurements are discussed. The pertinent design goals were temperature range of plus 200 to minus 423 F, valve inlet pressure 35 psia, actuation pressure 750 psia, main seal leakage 3 x 0.00001 sccs at 35 psia valve inlet pressure, and a storage and operating life of 10 years. The valve was designed to be compatible with RP-1, propane, LH2, LO2, He, and N2.

  7. Quartz ball valve

    NASA Technical Reports Server (NTRS)

    Goetz, C.; Ingle, W. M. (Inventor)

    1980-01-01

    A ball valve particularly suited for use in the handling of highly corrosive fluids is described. It is characterized by a valve housing formed of communicating segments of quartz tubing, a pair of communicating sockets disposed in coaxial alignment with selected segments of tubing for establishing a pair of inlet ports communicating with a common outlet port, a ball formed of quartz material supported for displacement between the sockets and configured to be received alternately thereby, and a valve actuator including a rod attached to the ball for selectively displacing the ball relative to each of the sockets for controlling fluid flow through the inlet ports.

  8. Mesofluidic two stage digital valve

    DOEpatents

    Jansen, John F; Love, Lonnie J; Lind, Randall F; Richardson, Bradley S

    2013-12-31

    A mesofluidic scale digital valve system includes a first mesofluidic scale valve having a valve body including a bore, wherein the valve body is configured to cooperate with a solenoid disposed substantially adjacent to the valve body to translate a poppet carried within the bore. The mesofluidic scale digital valve system also includes a second mesofluidic scale valve disposed substantially perpendicular to the first mesofluidic scale valve. The mesofluidic scale digital valve system further includes a control element in communication with the solenoid, wherein the control element is configured to maintain the solenoid in an energized state for a fixed period of time to provide a desired flow rate through an orifice of the second mesofluidic valve.

  9. Mitral Valve Prolapse

    MedlinePlus

    ... Kawasaki Disease Long Q-T Syndrome Marfan Syndrome Metabolic Syndrome Mitral Valve Prolapse Myocardial Bridge Myocarditis Obstructive Sleep Apnea Pericarditis Peripheral Vascular Disease Rheumatic Fever Sick Sinus Syndrome Silent Ischemia Stroke Sudden ...

  10. Pulmonary valve stenosis

    MedlinePlus

    ... valvuloplasty - pulmonary Images Heart valves References Carabello BA. Valvular heart disease. In: Goldman L, Schafer AI, eds. Goldman's Cecil ... Saunders; 2016:chap 69. Otto CM, Bownow RO. Valvular heart disease. In: Mann DL, Zipes DP, Libby P, Bonow ...

  11. Valve Repair or Replacement

    MedlinePlus

    ... invasive valve surgery can be done using a robot. Robotic surgery does not require a large incision ... the procedure. The Texas Heart Institute has a robot. With robotic surgery, the surgeon has a control ...

  12. Mitral Valve Prolapse.

    ERIC Educational Resources Information Center

    Bergy, Gordon G.

    1980-01-01

    Mitral valve prolapse is the most common heart disease seen in college and university health services. It underlies most arrhythmia and many chest complaints. Activity and exercise restrictions are usually unnecessary. (Author/CJ)

  13. Pulmonary Valve Stenosis

    MedlinePlus

    ... as mild, moderate or severe, depending on a measurement of the blood pressure difference between the right ... balloon, widening the narrowed valve to increase blood flow, and then removes the balloon. The most common ...

  14. Bidirectional piston valve

    DOEpatents

    Fischer, Harry C.

    1977-01-01

    This invention is a reversing valve having an inlet, an outlet, and an inlet-outlet port. The valve is designed to respond to the introduction of relatively high-pressure fluid at its inlet or, alternatively, of lower-pressure fluid at its inlet-outlet port. The valve includes an axially slidable assembly which is spring-biased to a position where it isolates the inlet and connects the inlet-outlet port to the outlet. The admission of high-pressure fluid to the inlet displaces the slidable assembly to a position where the outlet is isolated and the inlet is connected to the inlet-outlet port. The valve is designed to minimize pressure drops and leakage. It is of a reliable and comparatively simple design.

  15. Bicuspid aortic valve

    MedlinePlus

    ... stiff and not open up. This is called aortic stenosis , which causes the heart to pump harder than usual to get blood through the valve. The aorta may become enlarged with this condition. BAV is ...

  16. THERMALLY OPERATED VAPOR VALVE

    DOEpatents

    Dorward, J.G. Jr.

    1959-02-10

    A valve is presented for use in a calutron to supply and control the vapor to be ionized. The invention provides a means readily operable from the exterior of the vacuum tank of the apparatuss without mechanical transmission of forces for the quick and accurate control of the ionizing arc by a corresponding control of gas flow theretos thereby producing an effective way of carefully regulating the operation of the calutron. The invention consists essentially of a tube member extending into the charge bottle of a calutron devices having a poppet type valve closing the lower end of the tube. An electrical heating means is provided in the valve stem to thermally vary the length of the stem to regulate the valve opening to control the flow of material from the charge bottle.

  17. Liquid blocking check valve

    DOEpatents

    Merrill, John T.

    1984-01-01

    A liquid blocking check valve useful particularly in a pneumatic system utilizing a pressurized liquid fill chamber. The valve includes a floatable ball disposed within a housing defining a chamber. The housing is provided with an inlet aperture disposed in the top of said chamber, and an outlet aperture disposed in the bottom of said chamber in an offset relation to said inlet aperture and in communication with a cutaway side wall section of said housing.

  18. Valve for gas centrifuges

    DOEpatents

    Hahs, Charles A.; Burbage, Charles H.

    1984-01-01

    The invention is a pneumatically operated valve assembly for simultaneously (1) closing gas-transfer lines connected to a gas centrifuge or the like and (2) establishing a recycle path between two of the lines so closed. The valve assembly is especially designed to be compact, fast-acting, reliable, and comparatively inexpensive. It provides large reductions in capital costs for gas-centrifuge cascades.

  19. Bicuspid Aortic Valve

    DTIC Science & Technology

    2006-08-01

    severe aortic stenosis . Figure 1F. Oblique axial cine bright blood imaging through the valve plane of the aorta, demonstrates the aortic valve to...the ascending aorta. This moderate to large jet is consistent with moderate to severe aortic stenosis . No diastolic jet to suggest aortic ...conditions. Functional impairment of the aortic valve—namely aortic stenosis and aortic regurgitation—is the most common complication (in up to 68-85% of

  20. Engine valve train module

    SciTech Connect

    Wirth, R.C.; De Klep, E.L.

    1988-01-26

    In a reciprocating internal combustion engine of the type having an engine block means defining at least one cylinder with a first port and a second port in flow communication therewith, a first valve and a second valve reciprocably located to control flow through the first and second ports, respectively, and normally biased to a port closed position, the improvement is described comprising a valve train module that includes a housing adapted to be secured by machine screws to the engine block means above the first and second valves; an engine driven camshaft having axial spaced apart first and second cam lobes operatively supported for rotation in the housing; a lifter guide bore in the housing located substantially coaxial with the reciprocating axis of the first valve; a direct acting hydraulic lash adjuster operatively supported in the lifter guide bore with one end thereof engaging the first cam lobe and at its opposite end being operatively connected to the first valve. A follower guide bore is in the housing operatively aligned relative to the second cam lobe; a hollow rocker shaft is operatively fixed in the housing in parallel spaced apart relationship to the engine driven camshaft; a rocker arm pivotably supported intermediate its ends by the rocker shaft.

  1. 2,3,4,6-Tetrachlorophenol

    Integrated Risk Information System (IRIS)

    2,3,4,6 - Tetrachlorophenol ; CASRN 58 - 90 - 2 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncar

  2. Mitral disc-valve variance

    PubMed Central

    Berroya, Renato B.; Escano, Fernando B.

    1972-01-01

    This report deals with a rare complication of disc-valve prosthesis in the mitral area. A significant disc poppet and struts destruction of mitral Beall valve prostheses occurred 20 and 17 months after implantation. The resulting valve incompetence in the first case contributed to the death of the patient. The durability of Teflon prosthetic valves appears to be in question and this type of valve probably will be unacceptable if there is an increasing number of disc-valve variance in the future. Images PMID:5017573

  3. LiHo(PO3)4

    PubMed Central

    Ben Zarkouna, Emna; Driss, Ahmed; Férid, Mokhtar

    2009-01-01

    Lithium holmium(III) polyphosphate(V), LiHo(PO3)4, belongs to the type I of polyphosphates with general formula ALn(PO3)4, where A is a monovalent cation and Ln is a trivalent rare earth cation. In the crystal structure, the polyphosphate chains spread along the b-axis direction, with a repeat period of four tetra­hedra and 21 inter­nal symmetry. The Li and Ho atoms are both located on twofold rotation axes and are surrounded by four and eight O atoms, leading to a distorted tetra­hedral and dodeca­hedral coordination, respectively. The HoO8 polyhedra are isolated from each other, the closest Ho⋯Ho distance being 5.570 (1) Å. PMID:21581738

  4. 9. BUTTERFLY VALVE CONTROL DIABLO POWERHOUSE. BUTTERFLY VALVES WERE MANUFACTURED ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    9. BUTTERFLY VALVE CONTROL DIABLO POWERHOUSE. BUTTERFLY VALVES WERE MANUFACTURED BY THE PELTON WATER WHEEL COMPANY IN 1931, 1989. - Skagit Power Development, Diablo Powerhouse, On Skagit River, 6.1 miles upstream from Newhalem, Newhalem, Whatcom County, WA

  5. Implantation of the CoreValve percutaneous aortic valve.

    PubMed

    Lamarche, Yoan; Cartier, Raymond; Denault, André Y; Basmadjian, Arsène; Berry, Colin; Laborde, Jean-Claude; Bonan, Raoul

    2007-01-01

    Surgical aortic valve replacement is the only recommended treatment for significant aortic valve stenosis. Percutaneous aortic valve replacement appears to be a novel option for high-risk patients. We report the implantation of the ReValving system (CoreValve, Paris, France) in a 64-year-old woman who was refused aortic valve replacement surgery for critical aortic stenosis and left ventricular dysfunction because of severe pulmonary fibrosis. After anesthesia, the patient was put on femorofemoral cardiopulmonary bypass, and underwent a balloon valvuloplasty with subsequent retrograde aortic valve replacement by the ReValving system. Transesophageal echocardiographic monitoring of the patient's hemodynamics showed immediate improvements of the valvular area and left ventricular ejection fraction and only traces of paravalvular leaks. The patient was easily weaned from ventilation and resumed activity soon after the surgery. A multidisciplinary approach is presently necessary to offer a reliable and safe procedure.

  6. Perceval Sutureless Valve – are Sutureless Valves Here?

    PubMed Central

    Chandola, Rahul; Teoh, Kevin; Elhenawy, Abdelsalam; Christakis, George

    2015-01-01

    With the advent of transcatheter aortic valve implantation (TAVI) techniques, a renewed interest has developed in sutureless aortic valve concepts in the last decade. The main feature of sutureless aortic valve implantation is the speed of insertion, thus making implantation easier for the surgeon. As a result, cross clamp times and myocardial ischemia may be reduced. The combined procedures (CABG with AVR in particular) can be done with a short cross clamp time. Perceval valve also provides an increased effective orifice area as compared with a stented bioprosthesis. Sutureless implantation of the Perceval valve is not only associated with shorter cross-clamp and cardiopulmonary bypass times but improved clinical outcomes too. This review covers the sutureless aortic valves and their evolution, with elaborate details on Perceval S valve in particular (which is the most widely used sutureless valve around the globe). PMID:25394851

  7. Fast closing valve

    SciTech Connect

    Hanson, C.L.

    1984-01-10

    A valve is provided for protecting the high vacuum of a particle accelerator in the event of air leakage, wherein the valve provides an axially symmetrical passage to avoid disturbance of the partical beam during normal operation, and yet enables very rapid and tight closure of the beam-carrying pipe in the event of air leakage. The valve includes a ball member which can rotate between a first position wherein a bore in the member is aligned with the beam pipe, and a second position out of line with the pipe. A seal member is flexibly sealed to the pipe, and has a seal end which can move tightly against the ball member after the bore has rotated out of line with the pipe, to thereby assure that the seal member does not retard rapid rotation of the ball valve member. The ball valve member can be rapidly rotated by a conductive arm fixed to it and which is rotated by the discharge of a capacitor bank through coils located adjacent to the arm.

  8. Fast closing valve

    DOEpatents

    Hanson, Clark L.

    1984-01-10

    A valve is provided for protecting the high vacuum of a particle accelera in the event of air leakage, wherein the valve provides an axially symmetrical passage to avoid disturbance of the partical beam during normal operation, and yet enables very rapid and tight closure of the beam-carrying pipe in the event of air leakage. The valve includes a ball member (30) which can rotate between a first position wherein a bore (32) in the member is aligned with the beam pipe, and a second position out of line with the pipe. A seal member (38) is flexibly sealed to the pipe, and has a seal end which can move tightly against the ball member after the bore has rotated out of line with the pipe, to thereby assure that the seal member does not retard rapid rotation of the ball valve member. The ball valve member can be rapidly rotated by a conductive arm (40) fixed to it and which is rotated by the discharge of a capacitor bank through coils (44, 45) located adjacent to the arm.

  9. Sutureless aortic valve replacement

    PubMed Central

    Phan, Kevin

    2015-01-01

    The increasing incidence of aortic stenosis and greater co-morbidities and risk profiles of the contemporary patient population has driven the development of minimally invasive aortic valve surgery and percutaneous transcatheter aortic valve implantation (TAVI) techniques to reduce surgical trauma. Recent technological developments have led to an alternative minimally invasive option which avoids the placement and tying of sutures, known as “sutureless” or rapid deployment aortic valves. Potential advantages for sutureless aortic prostheses include reducing cross-clamp and cardiopulmonary bypass (CPB) duration, facilitating minimally invasive surgery and complex cardiac interventions, whilst maintaining satisfactory hemodynamic outcomes and low paravalvular leak rates. However, given its recent developments, the majority of evidence regarding sutureless aortic valve replacement (SU-AVR) is limited to observational studies and there is a paucity of adequately-powered randomized studies. Recently, the International Valvular Surgery Study Group (IVSSG) has formulated to conduct the Sutureless Projects, set to be the largest international collaborative group to investigate this technology. This keynote lecture will overview the use, the potential advantages, the caveats, and current evidence of sutureless and rapid deployment aortic valve replacement (AVR). PMID:25870807

  10. Aortic valve replacement with the De Bakey valve.

    PubMed

    Paton, B C; Pine, M B

    1976-10-01

    De Bakey prostheses were inserted in 29 patients with aortic valve disease between October, 1970, and May, 1972. Ten patients have died, but all but one of the remaining 19 have beel followed for a minimum of 19 months. Evaluation of the results in these subjects indicates that the function of the De Bakey valve compares favorably with that of other aortic valve prostheses.

  11. 81. View of 41 valve house (right) and 42 valve ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    81. View of 4-1 valve house (right) and 4-2 valve house (left); in the foreground is penstock which extends from Penstock No. 1 to the 4-1 valve house; looking south. Photo by Jet Lowe, HAER, 1989. - Puget Sound Power & Light Company, White River Hydroelectric Project, 600 North River Avenue, Dieringer, Pierce County, WA

  12. 83. Interior of 42 valve house; the motor and valve ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    83. Interior of 4-2 valve house; the motor and valve mechanism is identical to that in the 4-1 valve house. Photo by Jet Lowe, HAER, 1989. - Puget Sound Power & Light Company, White River Hydroelectric Project, 600 North River Avenue, Dieringer, Pierce County, WA

  13. What Is Mitral Valve Prolapse?

    MedlinePlus

    ... may not close tightly. These flaps normally help seal or open the valve. Much of the time, ... and tricuspid valves close. They form a tight seal that prevents blood from flowing back into the ...

  14. Medications for Heart Valve Symptoms

    MedlinePlus

    ... Peripheral Artery Disease Venous Thromboembolism Aortic Aneurysm More Medications for Heart Valve Symptoms Updated:Sep 21,2016 How do medications help people with valve problems? People who are ...

  15. Locking apparatus for gate valves

    DOEpatents

    Fabyan, Joseph; Williams, Carl W.

    1988-01-01

    A locking apparatus for fluid operated valves having a piston connected to the valve actuator which moves in response to applied pressure within a cylinder housing having a cylinder head, a catch block is secured to the piston, and the cylinder head incorporates a catch pin. Pressure applied to the cylinder to open the valve moves the piston adjacent to the cylinder head where the catch pin automatically engages the catch block preventing futher movement of the piston or premature closure of the valve. Application of pressure to the cylinder to close the valve, retracts the catch pin, allowing the valve to close. Included are one or more selector valves, for selecting pressure application to other apparatus depending on the gate valve position, open or closed, protecting such apparatus from damage due to premature closing caused by pressure loss or operational error.

  16. Locking apparatus for gate valves

    DOEpatents

    Fabyan, J.; Williams, C.W.

    A locking apparatus for fluid operated valves having a piston connected to the valve actuator which moves in response to applied pressure within a cylinder housing having a cylinder head, a catch block is secured to the piston, and the cylinder head incorporates a catch pin. Pressure applied to the cylinder to open the valve moves the piston adjacent to the cylinder head where the catch pin automatically engages the catch block preventing further movement of the piston or premature closure of the valve. Application of pressure to the cylinder to close the valve, retracts the catch pin, allowing the valve to close. Included are one or more selector valves, for selecting pressure application to other apparatus depending on the gate valve position, open or closed, protecting such apparatus from damage due to premature closing caused by pressure loss or operational error.

  17. Aortic valve surgery - minimally invasive

    MedlinePlus

    ... of the heart is reduced. This is called aortic stenosis. The aortic valve can be replaced using: Minimally ... RN, Wang A. Percutaneous heart valve replacement for aortic stenosis: state of the evidence. Ann Intern Med . 2010; ...

  18. Valve-spring Surge

    NASA Technical Reports Server (NTRS)

    Marti, Willy

    1937-01-01

    Test equipment is described that includes a system of three quartz indicators whereby three different pressures could be synchronized and simultaneously recorded on a single oscillogram. This equipment was used to test the reliction of waves at ends of valve spring, the dynamical stress of the valve spring for a single lift of the valve, and measurement of the curve of the cam tested. Other tests included simultaneous recording of the stress at both ends of the spring, spring oscillation during a single lift as a function of speed, computation of amplitude of oscillation for a single lift by harmonic analysis, effect of cam profile, the setting up of resonance, and forced spring oscillation with damping.

  19. Sliding valve pump

    SciTech Connect

    Rupert, C.L.

    1980-09-09

    A sliding valve pump for oil wells which includes a working barrel having a plurality of apertures located in spaced relationship in the wall thereof and a pair of travelling valves fitted within the working barrel and carried by a plunger rod, the valves also having a plurality of apertures or ports for periodic registration with the ports in the working barrel wall to facilitate pumping of fluid from an oil reservoir or pool to the surface. The pump is designed to pull the oil-gas mixture from the reservoir pool into the lower section of the working barrel on the downward stroke, and to subsequently pump the collected oil through the barrel and tubing upwardly toward the surface on the upward stroke.

  20. Variable Valve Actuation

    SciTech Connect

    Jeffrey Gutterman; A. J. Lasley

    2008-08-31

    Many approaches exist to enable advanced mode, low temperature combustion systems for diesel engines - such as premixed charge compression ignition (PCCI), Homogeneous Charge Compression Ignition (HCCI) or other HCCI-like combustion modes. The fuel properties and the quantity, distribution and temperature profile of air, fuel and residual fraction in the cylinder can have a marked effect on the heat release rate and combustion phasing. Figure 1 shows that a systems approach is required for HCCI-like combustion. While the exact requirements remain unclear (and will vary depending on fuel, engine size and application), some form of substantially variable valve actuation is a likely element in such a system. Variable valve actuation, for both intake and exhaust valve events, is a potent tool for controlling the parameters that are critical to HCCI-like combustion and expanding its operational range. Additionally, VVA can be used to optimize the combustion process as well as exhaust temperatures and impact the after treatment system requirements and its associated cost. Delphi Corporation has major manufacturing and product development and applied R&D expertise in the valve train area. Historical R&D experience includes the development of fully variable electro-hydraulic valve train on research engines as well as several generations of mechanical VVA for gasoline systems. This experience has enabled us to evaluate various implementations and determine the strengths and weaknesses of each. While a fully variable electro-hydraulic valve train system might be the 'ideal' solution technically for maximum flexibility in the timing and control of the valve events, its complexity, associated costs, and high power consumption make its implementation on low cost high volume applications unlikely. Conversely, a simple mechanical system might be a low cost solution but not deliver the flexibility required for HCCI operation. After modeling more than 200 variations of the

  1. Hydrogen gas relief valve

    DOEpatents

    Whittlesey, Curtis C.

    1985-01-01

    An improved battery stack design for an electrochemical system having at least one cell from which a gas is generated and an electrolyte in communication with the cell is described. The improved battery stack design features means for defining a substantially closed compartment for containing the battery cells and at least a portion of the electrolyte for the system, and means in association with the compartment means for selectively venting gas from the interior of the compartment means in response to the level of the electrolyte within the compartment means. The venting means includes a relief valve having a float member which is actuated in response to the level of the electrolyte within the compartment means. This float member is adapted to close the relief valve when the level of the electrolyte is above a predetermined level and open the relief valve when the level of electrolyte is below this predetermined level.

  2. Magnetostrictive valve assembly

    NASA Technical Reports Server (NTRS)

    Richard, James A. (Inventor)

    2008-01-01

    A magnetostrictive valve assembly includes a housing that defines a passage with a seat being formed therein. A magnetically-biased and axially-compressed magnetostrictive assembly slidingly fitted in the passage is configured as a hollow and open-ended conduit adapted to support a flow of a fluid therethrough. Current-carrying coil(s) disposed about the passage in the region of the magnetostrictive assembly generate a magnetic field in the passage when current flows through the coil(s). A hollow valve body with side ports is coupled on one end thereof to an axial end of the magnetostrictive assembly. The other end of the valve body is designed to seal with the seat formed in the housing's passage when brought into contact therewith.

  3. Josephson magnetic rotary valve

    SciTech Connect

    Soloviev, I. I.; Klenov, N. V.; Bakurskiy, S. V.; Bol'ginov, V. V.; Ryazanov, V. V.; Kupriyanov, M. Yu.; Golubov, A. A.

    2014-12-15

    We propose a control element for a Josephson spin valve. It is a complex Josephson device containing ferromagnetic (F) layer in the weak-link area consisting of two regions, representing 0 and π Josephson junctions, respectively. The valve's state is defined by mutual orientations of the F-layer magnetization vector and boundary line between 0 and π sections of the device. We consider possible implementation of the control element by introduction of a thin normal metal layer in a part of the device area. By means of theoretical simulations, we study properties of the valve's structure as well as its operation, revealing such advantages as simplicity of control, high characteristic frequency, and good legibility of the basic states.

  4. Shifting Attention

    ERIC Educational Resources Information Center

    Ingram, Jenni

    2014-01-01

    This article examines the shifts in attention and focus as one teacher introduces and explains an image that represents the processes involved in a numeric problem that his students have been working on. This paper takes a micro-analytic approach to examine how the focus of attention shifts through what the teacher and students do and say in the…

  5. Self-regulating valve

    DOEpatents

    Humphreys, D.A.

    1982-07-20

    A variable, self-regulating valve having a hydraulic loss coefficient proportional to a positive exponential power of the flow rate. The device includes two objects in a flow channel and structure which assures that the distance between the two objects is an increasing function of the flow rate. The range of spacing between the objects is such that the hydraulic resistance of the valve is an increasing function of the distance between the two objects so that the desired hydraulic loss coefficient as a function of flow rate is obtained without variation in the flow area.

  6. Ball valve safety screen

    SciTech Connect

    Bolding, B.H.

    1981-09-01

    A device for preventing unwanted objects from entering the ball assembly of a float collar or float shoe and otherwise damaging or plugging the valve mechanism therein is disclosed. The device comprises a screen constructed of expanded metal and rigidly affixed to the interior of the float collar or float shoe above the ball valve assembly. The screen portion is either mounted to the interior surface of the float collar sleeve by an annular structural member or mounted to a structural band which is partially embedded in the concrete portion of the float collar or casing guide shoe.

  7. LiDy(PO3)4

    PubMed Central

    Chehimi-Moumen, Fathia; Férid, Mokhtar

    2008-01-01

    Single crystals of lithium dysprosium polyphosphate, LiDy(PO3)4, were prepared by the flux method. The atomic arrangement is built up by infinite (PO3)n chains extending along the b axis. Dy3+ and Li+ cations alternate in the middle of four such chains, with Dy⋯Li distances of 3.54 (1) and 3.48 (1) Å. The DyO8 dodeca­hedra and LiO4 tetra­hedra deviate significantly from the ideal geometry. Both Dy and Li occupy special positions (Wyckoff position 4e, site symmetry 2). PMID:21202729

  8. STARS Proceedings (3-4 December 1991)

    DTIC Science & Technology

    1991-12-04

    SUBTITLE S FUNDING NUMBERS STARS 󈨟 Proceedings 3-4 December, 1991 F19628-88-D-0031 6. AUTHOR (S) Paramax Corporation 7. PERFORMING ORGANIZATION NAME...See authorities . Block 4. Title and Subtitle. A title is taken from NASA - See Handbook NH8 2200.2. ,he part of the report that provides the most NTIS...numbers shown in the Authors Index found at the back of these proceedings include a coded prefix (P, 1, 2, 3, or 4) to indicate the part of the

  9. Lightweight Valve Closes Duct Quickly

    NASA Technical Reports Server (NTRS)

    Fournier, Walter L.; Burgy, N. Frank

    1991-01-01

    Expanding balloon serves as lightweight emergency valve to close wide duct. Uninflated balloon stored in housing of duct. Pad resting on burst diaphragm protects balloon from hot gases in duct. Once control system triggers valve, balloon inflates rapidly to block duct. Weighs much less than does conventional butterfly, hot-gas, or poppet valve capable of closing duct of equal diameter.

  10. Lipomatous hamartoma of mitral valve.

    PubMed

    Bhat, Seetharama P S; Gowda, Girish S L; Chikkatur, Raghavendra; Nanjappa, Manjunath C

    2016-01-01

    Primary cardiac tumors are very rare, and tumors arising from cardiac valves are extremely rare. We present a case of lipomatous hamartoma of the mitral valve in a young female. This is the 6th case of lipomatous hamartoma of the mitral valve to be reported. We discuss the operative and histopathological findings.

  11. Valve stem and packing assembly

    DOEpatents

    Wordin, John J.

    1991-01-01

    A valve stem and packing assembly is provided in which a rotatable valve stem includes a first tractrix surface for sliding contact with a stem packing and also includes a second tractrix surface for sliding contact with a bonnet. Force is applied by means of a spring, gland flange, and gland on the stem packing so the stem packing seals to the valve stem and bonnet. This configuration serves to create and maintain a reliable seal between the stem packing and the valve stem. The bonnet includes a second complementary tractrix surface for contacting the second sliding tractrix surface, the combination serving as a journal bearing for the entire valve stem and packing assembly. The journal bearing so configured is known as a Schiele's pivot. The Schiele's pivot also serves to maintain proper alignment of the valve stem with respect to the bonnet. Vertical wear between the surfaces of the Schiele's pivot is uniform at all points of contact between the second sliding tractrix surface and the second complementary tractrix surface of a bonnet. The valve stem is connected to a valve plug by means of a slip joint. The valve is opened and closed by rotating the valve stem. The slip joint compensates for wear on the Schiele's pivot and on the valve plug. A ledge is provided on the valve bonnet for the retaining nut to bear against. The ledge prevents overtightening of the retaining nut and the resulting excessive friction between stem and stem packing.

  12. Valve stem and packing assembly

    DOEpatents

    Wordin, J.J.

    1991-09-03

    A valve stem and packing assembly is provided in which a rotatable valve stem includes a first tractrix surface for sliding contact with a stem packing and also includes a second tractrix surface for sliding contact with a bonnet. Force is applied by means of a spring, gland flange, and gland on the stem packing so the stem packing seals to the valve stem and bonnet. This configuration serves to create and maintain a reliable seal between the stem packing and the valve stem. The bonnet includes a second complementary tractrix surface for contacting the second sliding tractrix surface, the combination serving as a journal bearing for the entire valve stem and packing assembly. The journal bearing so configured is known as a Schiele's pivot. The Schiele's pivot also serves to maintain proper alignment of the valve stem with respect to the bonnet. Vertical wear between the surfaces of the Schiele's pivot is uniform at all points of contact between the second sliding tractrix surface and the second complementary tractrix surface of a bonnet. The valve stem is connected to a valve plug by means of a slip joint. The valve is opened and closed by rotating the valve stem. The slip joint compensates for wear on the Schiele's pivot and on the valve plug. A ledge is provided on the valve bonnet for the retaining nut to bear against. The ledge prevents over tightening of the retaining nut and the resulting excessive friction between stem and stem packing. 2 figures.

  13. Transcatheter Valve-in-Valve: A Cautionary Tale.

    PubMed

    Luc, Jessica G Y; Shanks, Miriam; Tyrrell, Benjamin D; Welsh, Robert C; Butler, Craig R; Meyer, Steven R

    2016-09-01

    Transcatheter aortic valve replacement (TAVR) by valve-in-valve (VIV) implantation is an alternative treatment for high-risk patients with a degenerating aortic bioprosthesis. We present a case of transapical TAVR VIV with a 29-mm Edwards SAPIEN XT (ESV) (Edwards Lifesciences, Irvine, CA) into a 29-mm Medtronic Freestyle stentless bioprosthesis (Medtronic Inc, Minneapolis, MN) in which unanticipated dilatation of the Freestyle bioprosthesis resulted in intraprocedural embolization of the TAVR valve, necessitating urgent conversion to a conventional surgical aortic valve replacement (AVR). Our experience suggests that TAVR VIV with the 29-mm ESV in the setting of a degenerated 29-mm Freestyle stentless bioprosthesis must be undertaken with caution.

  14. Mechanism utilizing a single rocker arm for controlling an internal combustion engine valve

    SciTech Connect

    Burandt, C.O.

    1988-02-09

    This patent describes in combination with an internal combustion engine having a rotatable camshaft, a cam on the camshaft, a combustion chamber and a reciprocable valve member for opening and closing a valve port in communication with the combustion chamber, a mechanism for operating the valve member comprising a rocker arm having first and second angularly disposed and integrally connected legs. The first leg having a cam follower suface thereon having a first section thereof extending in the same general direction that the valve member reciprocates and having a second section thereof curving toward the valve member and toward the direction in which the valve member reciprocates, means mounting the rocker arm for rocking movement about a first axis, and means for shifting the first axis relative to the camshaft in also the same general direction the valve member reciprocates so that various portions of the first and second sections of the cam follower surface on the first leg are relatively engageable with the cam, sufficient shifting of the first axis in the same general direction producing a desmodromic action, and the second leg including a single portion thereof engaging the valve member so that only the single portion acts on the valve member.

  15. Improved Merge Valve

    NASA Technical Reports Server (NTRS)

    George-Falvy, Dez

    1992-01-01

    Circumferential design combines compactness and efficiency. In remotely controlled valve, flow in tributary duct along circumference of primary duct merged with flow in primary duct. Flow in tributary duct regulated by variable throat nuzzle driven by worm gear. Design leak-proof, and most components easily fabricated on lathe.

  16. Aortic valve surgery - open

    MedlinePlus

    ... Saunders; 2012:chap 61. Otton CM, Bowow RO. Valvular heart disease. In: Mann DL, Zipes DP, Libby P, Bonow ... Editorial team. Related MedlinePlus Health Topics Heart Surgery Heart Valve Diseases Browse the Encyclopedia A.D.A.M., Inc. ...

  17. Valve for cryogenic service

    DOEpatents

    Worwetz, H.A.

    1975-09-02

    This patent relates to a valve for use with a liquefied gas at cryogenic temperatures in which a pair of joined knife edges are bellows controlled to contact an indium alloy seat in an annular slot when flow is to be stopped. The sealing alloy may be renewed by heating in situ. (auth)

  18. Poppet valve tester

    NASA Technical Reports Server (NTRS)

    Tellier, G. F.

    1973-01-01

    Tester investigates fundamental factors affecting cyclic life and sealing performance of valve seats and poppets. Tester provides for varying impact loading of poppet against seat and rate of cycling, and controls amount and type of relative motion between sealing faces of seat and poppet. Relative motion between seat and poppet can be varied in three modes.

  19. Thermostatic Radiator Valve Evaluation

    SciTech Connect

    Dentz, Jordan; Ansanelli, Eric

    2015-01-01

    A large stock of multifamily buildings in the Northeast and Midwest are heated by steam distribution systems. Losses from these systems are typically high and a significant number of apartments are overheated much of the time. Thermostatically controlled radiator valves (TRVs) are one potential strategy to combat this problem, but have not been widely accepted by the residential retrofit market.

  20. Valve for gas centrifuges

    DOEpatents

    Hahs, C.A.; Rurbage, C.H.

    1982-03-17

    The invention is pneumatically operated valve assembly for simulatenously (1) closing gas-transfer lines connected to a gas centrifuge or the like and (2) establishing a recycle path between two on the lines so closed. The value assembly is especially designed to be compact, fast-acting, reliable, and comparatively inexpensive. It provides large reductions in capital costs for gas-centrifuge cascades.

  1. Transcatheter aortic valve replacement

    MedlinePlus

    ... fully will restrict blood flow. This is called aortic stenosis. If there is also a leak, it is ... TAVR is used for people with severe aortic stenosis who aren't ... valve . In adults, aortic stenosis usually occurs due to calcium ...

  2. TUBE SHEARING VALVE

    DOEpatents

    Wilner, L.B.

    1960-05-24

    Explosive operated valves can be used to join two or more containers in fluid flow relationship, one such container being a sealed reservoir. The valve is most simply disposed by mounting it on the reservoir so thst a tube extends from the interior of the reservoir through the valve body, terminating at the bottom of the bore in a closed end; other containers may be similarly connected or may be open connected, as desired. The piston of the valve has a cutting edge at its lower end which shears off the closed tube ends and a recess above the cutting edge to provide a flow channel. Intermixing of the fluid being transferred with the explosion gases is prevented by a copper ring at the top of the piston which is force fitted into the bore at the beginning of the stroke. Although designed to avoid backing up of the piston at pressures up to 10,000 psi in the transferred fluid, proper operation is independent of piston position, once the tube ends were sheared.

  3. Miniature Latching Valve

    NASA Technical Reports Server (NTRS)

    Johnson, A. David; Benson, Glendon M.

    2008-01-01

    A miniature latching valve has been invented to satisfy a need for an electrically controllable on/off pneumatic valve that is lightweight and compact and remains in the most recently commanded open or closed state when power is not supplied. The valve includes a poppet that is moved into or out of contact with a seat to effect closure or opening, respectively, of the flow path. Motion of the poppet is initiated by electrical heating of one of two opposing pairs of nickel/titanium shape-memory alloy (SMA) wires above their transition temperature: heated wires contract to their remembered length, applying tension to pull the poppet toward or away from the seat. A latch consisting mainly of a bistable Belleville washer (a conical spring) made of a hardened stainless steel operates between two stable positions corresponding to the fully closed or fully open state, holding the poppet in one of these positions when power is not applied to either pair of SMA wires. To obtain maximum actuation force and displacement, the SMA wires must be kept in tension. The mounting fixtures at the ends of the wires must support large tensile stresses without creating stress concentrations that would limit the fatigue lives of the wires. An earlier design provided for each wire to be crimped in a conical opening with a conical steel ferrule that was swaged into the opening to produce a large, uniformly distributed holding force. In a subsequent design, the conical ferrule was replaced with a larger crimped cylindrical ferrule depicted in the figure. A major problem in designing the valve was to protect the SMA wires from a bake-out temperature of 300 C. The problem was solved by incorporating the SMA wires into an actuator module that is inserted into a barrel of the valve body and is held in place by miniature clip rings.

  4. Determination of amphetamine, methamphetamine, 3,4-methylenedioxyamphetamine, 3,4-methylenedioxyethylamphetamine, and 3,4-methylenedioxymethamphetamine in urine by online solid-phase extraction and ion-pairing liquid chromatography with detection by electrospray tandem mass spectrometry.

    PubMed

    Wu, Ti-Yu; Fuh, Ming-Ren

    2005-01-01

    A method using an online solid-phase extraction (SPE) and ion-pairing liquid chromatography with electrospray tandem mass spectrometry (LC/ES-MS/MS) was developed for determination of amphetamine (Amp), methamphetamine (mAmp), 3,4-methylenedioxyamphetamine (MDA), 3,4-methylenedioxyethylamphetamine (MDEA), and 3,4-methylenedioxymethamphetamine (MDMA) in urine samples. A SPE cartridge column with both hydrophilic and lipophilic functions was utilized for online extraction. A reversed-phase C18 LC column was employed for LC separation and MS/MS was used for detection. Trifluoroacetic acid was added to the mobile phase as an ion-pairing reagent. This method was fully automated and the extraction and analysis procedures were controlled by a six-port switch valve. Recoveries ranging from 85-101% were measured. Good linear ranges (10-500 ng/mL) for Amp and mAmp were determined. For MDA, MDMA and MDEA, dual linear ranges were obtained from 5-100 and 100-500 ng/mL, respectively. The detection limit of each analytical compound, based on a signal-to-noise ratio of 3, ranged from 1-3 ng/mL. The applicability of this newly developed method was examined by analyzing several urine samples from drug users. Good agreement was obtained between the results from this method and a literature GC/MS method.

  5. Multi-port valve assembly

    DOEpatents

    Guggenheim, S. Frederic

    1986-01-01

    A multi-port fluid valve apparatus is used to control the flow of fluids through a plurality of valves and includes a web, which preferably is a stainless steel endless belt. The belt has an aperture therethrough and is progressed, under motor drive and control, so that its aperture is moved from one valve mechanism to another. Each of the valve mechanisms comprises a pair of valve blocks which are held in fluid-tight relationship against the belt. Each valve block consists of a block having a bore through which the fluid flows, a first seal surrounding the bore and a second seal surrounding the first seal, with the distance between the first and second seals being greater than the size of the belt aperture. In order to open a valve, the motor progresses the belt aperture to where it is aligned with the two bores of a pair of valve blocks, such alignment permitting a flow of the fluid through the valve. The valve is closed by movement of the belt aperture and its replacement, within the pair of valve blocks, by a solid portion of the belt.

  6. Valve assembly for internal combustion engine

    SciTech Connect

    Wakeman, R.J.; Shea, S.F.

    1989-09-05

    This patent describes an improvement in a valve assembly for an internal combustion engine of the type including a valve having a valve stem, a valve guideway for mounting this valve for reciprocal strokes between opened and seated position, and spring means for biasing the valve into the seated position. The improvement comprising a valve spool of greater cross-sectional diameter as compared to the valve stem, and a valve spool guideway within which the valve spool is movable during the strokes of the valve, an upper surface of the valve spool and a portion of the spool guideway collectively establishing a damper chamber which varies in volume during the valve strokes. a feed passage for introducing oil into the damper chamber, and a bleed passage for discharging oil from the damper chamber. The bleed passages each laterally opening into the valve spool guideway.

  7. Micro-valve pump light valve display

    DOEpatents

    Lee, Yee-Chun

    1993-01-01

    A flat panel display incorporates a plurality of micro-pump light valves (MLV's) to form pixels for recreating an image. Each MLV consists of a dielectric drop sandwiched between substrates, at least one of which is transparent, a holding electrode for maintaining the drop outside a viewing area, and a switching electrode from accelerating the drop from a location within the holding electrode to a location within the viewing area. The sustrates may further define non-wetting surface areas to create potential energy barriers to assist in controlling movement of the drop. The forces acting on the drop are quadratic in nature to provide a nonlinear response for increased image contrast. A crossed electrode structure can be used to activate the pixels whereby a large flat panel display is formed without active driver components at each pixel.

  8. Micro-valve pump light valve display

    DOEpatents

    Yeechun Lee.

    1993-01-19

    A flat panel display incorporates a plurality of micro-pump light valves (MLV's) to form pixels for recreating an image. Each MLV consists of a dielectric drop sandwiched between substrates, at least one of which is transparent, a holding electrode for maintaining the drop outside a viewing area, and a switching electrode from accelerating the drop from a location within the holding electrode to a location within the viewing area. The sustrates may further define non-wetting surface areas to create potential energy barriers to assist in controlling movement of the drop. The forces acting on the drop are quadratic in nature to provide a nonlinear response for increased image contrast. A crossed electrode structure can be used to activate the pixels whereby a large flat panel display is formed without active driver components at each pixel.

  9. Electron attachment to Ni(PF(3))(4) and Pt(PF(3))(4).

    PubMed

    Friedman, Jeffrey F; Miller, Thomas M; Friedman-Schaffer, Jessica K; Viggiano, A A; Rekha, G K; Stevens, Amy E

    2008-03-14

    An experimental study has been made of thermal electron attachment to the transition-metal trifluorophosphine complexes Ni(PF(3))(4) and Pt(PF(3))(4) using a flowing-afterglow Langmuir-probe apparatus. Both complexes are efficient at electron attachment, although the rate constants are somewhat less than collisional. The rate constant for electron attachment to Ni(PF(3))(4) is 1.9 x 10(-7) cm(3) s(-1) at room temperature, about a factor of 2 less than collisional. The activation energy is 39+/-5 meV for the attachment reaction. The rate constant for electron attachment to Pt(PF(3))(4) is 5.4 x 10(-8) cm(3) s(-1) at room temperature, and the activation energy is 84+/-8 meV. For both complexes, a PF(3) ligand is lost on electron attachment, and only the M(PF(3))(3)(-) ion is observed in the negative-ion mass spectrum. Density functional calculations were carried out on Ni(PF(3))(4) and various fragments in order to describe the thermochemistry of the attachment reaction.

  10. Electron attachment to Ni(PF3)4 and Pt(PF3)4

    NASA Astrophysics Data System (ADS)

    Friedman, Jeffrey F.; Miller, Thomas M.; Friedman-Schaffer, Jessica K.; Viggiano, A. A.; Rekha, G. K.; Stevens, Amy E.

    2008-03-01

    An experimental study has been made of thermal electron attachment to the transition-metal trifluorophosphine complexes Ni(PF3)4 and Pt(PF3)4 using a flowing-afterglow Langmuir-probe apparatus. Both complexes are efficient at electron attachment, although the rate constants are somewhat less than collisional. The rate constant for electron attachment to Ni(PF3)4 is 1.9×10-7cm3s-1 at room temperature, about a factor of 2 less than collisional. The activation energy is 39±5meV for the attachment reaction. The rate constant for electron attachment to Pt(PF3)4 is 5.4×10-8cm3s-1 at room temperature, and the activation energy is 84±8meV. For both complexes, a PF3 ligand is lost on electron attachment, and only the M(PF3)3- ion is observed in the negative-ion mass spectrum. Density functional calculations were carried out on Ni(PF3)4 and various fragments in order to describe the thermochemistry of the attachment reaction.

  11. KPr(PO3)4

    PubMed Central

    Oudahmane, Abdelghani; Daoud, Mohamed; Tanouti, Boumediene; Avignant, Daniel; Zambon, Daniel

    2010-01-01

    Single crystals of the title compound, potassium praseodymium(III) polyphosphate, were obtained by solid-state reaction. The monoclinic non-centrosymmetric structure is isotypic with all other KLn(PO3)4 analogues from Ln = La to Er, inclusive. The crystal structure of these long-chain polyphosphates is built up from infinite crenelated polyphosphate chains of corner-sharing PO4 tetra­hedra with a repeating unit of four tetra­hedra. These chains, running along [100], are arranged in a pseudo-tetra­gonal rod packing and are further linked by isolated PrO8 square anti­prisms [Pr—O = 2.3787 (9)–2.5091 (8) Å], forming a three-dimensional framework. The K+ ions reside in channels parallel to [010] and exhibit a highly distorted coordination sphere by eight O atoms at distances ranging from 2.7908 (9) to 3.1924 (11) Å. PMID:21588081

  12. Fast acting multiple element valve

    DOEpatents

    Yang, Jefferson Y. S.; Wada, James M.

    1991-01-01

    A plurality of slide valve elements having plural axial-spaced annular parts and an internal slide are inserted into a bulkhead in a fluid conduit from a downstream side of the bulkhead, locked in place by a bayonet coupling and set screw, and project through the bulkhead into the upstream conduit. Pneumatic lines connecting the slide valve element actuator to pilot valves are brought out the throat of the valve element to the downstream side. Pilot valves are radially spaced around the exterior of the valve to permit the pneumatic lines to be made identical, thereby to minimize adverse timing tolerances in operation due to pressure variations. Ring manifolds surround the valve adjacent respective pilot valve arrangements to further reduce adverse timing tolerances due to pressure variations, the manifolds being directly connected to the respective pilot valves. Position sensors are provided the valve element slides to signal the precise time at which a slide reaches or passes through a particular point in its stroke to initiate a calibrated timing function.

  13. Fluid Shifts

    NASA Technical Reports Server (NTRS)

    Stenger, M. B.; Hargens, A.; Dulchavsky, S.; Ebert, D.; Lee, S.; Laurie, S.; Garcia, K.; Sargsyan, A.; Martin, D.; Lui, J.; Macias, B.; Arbeille, P.; Danielson, R.; Chang, D.; Gunga, H.; Johnston, S.; Westby, C.; Ribeiro, L.; Ploutz-Snyder, R.; Smith, S.

    2015-01-01

    INTRODUCTION: Mechanisms responsible for the ocular structural and functional changes that characterize the visual impairment and intracranial pressure (ICP) syndrome (VIIP) are unclear, but hypothesized to be secondary to the cephalad fluid shift experienced in spaceflight. This study will relate the fluid distribution and compartmentalization associated with long-duration spaceflight with VIIP symptoms. We also seek to determine whether the magnitude of fluid shifts during spaceflight, as well as the VIIP-related effects of those shifts, can be predicted preflight with acute hemodynamic manipulations, and also if lower body negative pressure (LBNP) can reverse the VIIP effects. METHODS: Physiologic variables will be examined pre-, in- and post-flight in 10 International Space Station crewmembers including: fluid compartmentalization (D2O and NaBr dilution); interstitial tissue thickness (ultrasound); vascular dimensions and dynamics (ultrasound and MRI (including cerebrospinal fluid pulsatility)); ocular measures (optical coherence tomography, intraocular pressure, ultrasound); and ICP measures (tympanic membrane displacement, otoacoustic emissions). Pre- and post-flight measures will be assessed while upright, supine and during 15 deg head-down tilt (HDT). In-flight measures will occur early and late during 6 or 12 month missions. LBNP will be evaluated as a countermeasure during HDT and during spaceflight. RESULTS: The first two crewmembers are in the preflight testing phase. Preliminary results characterize the acute fluid shifts experienced from upright, to supine and HDT postures (increased stroke volume, jugular dimensions and measures of ICP) which are reversed with 25 millimeters Hg LBNP. DISCUSSION: Initial results indicate that acute cephalad fluid shifts may be related to VIIP symptoms, but also may be reversible by LBNP. The effect of a chronic fluid shift has yet to be evaluated. Learning Objectives: Current spaceflight VIIP research is described

  14. Fast-acting valve and uses thereof

    DOEpatents

    Meyer, J.A.

    1980-05-16

    A very fast acting valve capable of producing a very well-defined plug of gas suitable for filling a theta pinch vacuum vessel is given. The valve requires no springs, instead being stopped mainly by a nonlinear force. Thus, the valve is not subject to bouncing; and the ratio of the size of the valve housing to the size of the valve stem is smaller than it would be if springs were needed to stop the valve stem. Furthermore, the valve can be used for thousands of valve firings with no apparent valve damage.

  15. Fast-acting valve and uses thereof

    DOEpatents

    Meyer, James A.

    1982-01-01

    A very fast acting valve capable of producing a very well-defined plug of gas suitable for filling a theta pinch vacuum vessel is given. The valve requires no springs, instead being stopped mainly by a nonlinear force. Thus, the valve is not subject to bouncing; and the ratio of the size of the valve housing to the size of the valve stem is smaller than it would be if springs were needed to stop the valve stem. Furthermore, the valve can be used for thousands of valve firings with no apparent valve damage.

  16. Rotary multiposition valve

    DOEpatents

    Barclay, John A.; Dyson, Jack E.

    1985-01-01

    The disclosure is directed to a rotary multiposition valve for selectively directing the flow of a fluid through a plurality of paths. The valve comprises an inner member and a hollow housing with a row of ducts on its outer surface. The ducts are in fluid communication with the housing. An engaging section of the inner member is received in the housing. A seal divides the engaging section into a hollow inlet segment and a hollow outlet segment. A plurality of inlet apertures are disposed in the inlet segment and a plurality of outlet apertures are disposed in the outlet segment. The inlet apertures are disposed in a longitudinally and radially spaced-apart pattern that can be a helix. The outlet apertures are disposed in a corresponding pattern. As the inner member is rotated, whenever an inlet aperture overlaps one of the ducts, the corresponding outlet aperture overlaps a different duct, thus forming a fluid pathway.

  17. Stemless ball valve

    NASA Technical Reports Server (NTRS)

    Burgess, Kevin (Inventor); Yakos, David (Inventor); Walthall, Bryan (Inventor)

    2011-01-01

    A stemless ball valve comprising two flanges and a ball with a channel, two axis pins and two travel pins. One end of each axis and travel pin is fixedly attached to the ball, and the other end of each axis pin is lodged into a notch in the first or second flange such that the axis pin is allowed to rotate in the notch. The guide sleeve comprises two channels, and one end of each travel pin is situated within one of the two channels in the guide sleeve. An outer magnetic cartridge causes the inner magnetic cartridge and guide sleeve to rotate, and when the guide sleeve rotates, the travel pins move up and down within the channels in the guide sleeve. The movement of the travel pins within the channels in the guide sleeve causes the ball to rotate, thereby opening and closing the ball valve.

  18. Rotary multiposition valve

    DOEpatents

    Barclay, J.A.; Dyson, J.E.

    1984-04-06

    The disclosure is directed to a rotary multiposition valve for selectively directing the flow of a fluid through a plurality of paths. The valve comprises an inner member and a hollow housing with a row of ducts on its outer surface. The ducts are in fluid communication with the housing. An engaging section of the inner member is received in the housing. A seal divides the engaging section into a hollow inlet segment and a hollow outlet segment. A plurality of inlet apertures are disposed in the inlet sgegment and a plurality of outlet apertures are disposed in the outlet segment. The inlet apertures are disposed in a longitudinally and radially spaced-apart pattern that can be a helix. The outlet apertures are disposed in a corresponding pattern. As the inner member is rotated, whenever an inlet aperture overlaps one of the ducts, the corresponding outlet aperture overlaps a different duct, thus forming a fluid pathway.

  19. Bioprosthetic mitral valve dysfunction due to native valve preserving procedure.

    PubMed

    Matsuno, Yukihiro; Mori, Yoshio; Umeda, Yukio; Takiya, Hiroshi

    2016-03-01

    Mitral valve replacement with preservation of the mitral leaflets and subvalvular apparatus is considered to maintain left ventricular geometry and function and reduce the risk of myocardial rupture. However, the routine use of this technique may lead to early complications such as left ventricular outflow tract obstruction and even mitral inflow obstruction, requiring reoperation. We describe a rare case of bioprosthetic mitral valve dysfunction caused by a native valve preserving procedure.

  20. Performance Characteristics of an Isothermal Freeze Valve

    SciTech Connect

    Hailey, A.E.

    2001-08-22

    This document discusses performance characteristics of an isothermal freeze valve. A freeze valve has been specified for draining the DWPF melter at the end of its lifetime. Two freeze valve designs have been evaluated on the Small Cylindrical Melter-2 (SCM-2). In order to size the DWPF freeze valve, the basic principles governing freeze valve behavior need to be identified and understood.

  1. Slow opening valve. [valve design for shuttle portable oxygen system

    NASA Technical Reports Server (NTRS)

    Drapeau, D. F. (Inventor)

    1984-01-01

    A valve control is described having a valve body with an actuator stem and a rotating handle connected to the actuator stem by a differential drive mechanism which, during uniform movement of the handle in one direction, initially opens the valve at a relatively slow rate and, thereafter, complete the valve movement at a substantially faster rate. A series of stop rings are received about the body in frictional abutting relationship and serially rotated by the handle to uniformly resist handle movement independently of the extent of handle movement.

  2. Sequenced drive for rotary valves

    DOEpatents

    Mittell, Larry C.

    1981-01-01

    A sequenced drive for rotary valves which provides the benefits of applying rotary and linear motions to the movable sealing element of the valve. The sequenced drive provides a close approximation of linear motion while engaging or disengaging the movable element with the seat minimizing wear and damage due to scrubbing action. The rotary motion of the drive swings the movable element out of the flowpath thus eliminating obstruction to flow through the valve.

  3. Semi-active compressor valve

    DOEpatents

    Brun, Klaus; Gernentz, Ryan S.

    2010-07-27

    A method and system for fine-tuning the motion of suction or discharge valves associated with cylinders of a reciprocating gas compressor, such as the large compressors used for natural gas transmission. The valve's primary driving force is conventional, but the valve also uses an electromagnetic coil to sense position of the plate (or other plugging element) and to provide an opposing force prior to impact.

  4. Streamline coal slurry letdown valve

    DOEpatents

    Platt, Robert J.; Shadbolt, Edward A.

    1983-01-01

    A streamlined coal slurry letdown valve is featured which has a two-piece throat comprised of a seat and seat retainer. The two-piece design allows for easy assembly and disassembly of the valve. A novel cage holds the two-piece throat together during the high pressure letdown. The coal slurry letdown valve has long operating life as a result of its streamlined and erosion-resistance surfaces.

  5. Streamline coal slurry letdown valve

    DOEpatents

    Platt, R.J.; Shadbolt, E.A.

    1983-11-08

    A streamlined coal slurry letdown valve is featured which has a two-piece throat comprised of a seat and seat retainer. The two-piece design allows for easy assembly and disassembly of the valve. A novel cage holds the two-piece throat together during the high pressure letdown. The coal slurry letdown valve has long operating life as a result of its streamlined and erosion-resistance surfaces. 5 figs.

  6. 3,4-methylenedioxymethamphetamine (MDMA): current perspectives

    PubMed Central

    Meyer, Jerrold S

    2013-01-01

    Ecstasy is a widely used recreational drug that usually consists primarily of 3,4-methylenedioxymethamphetamine (MDMA). Most ecstasy users consume other substances as well, which complicates the interpretation of research in this field. The positively rated effects of MDMA consumption include euphoria, arousal, enhanced mood, increased sociability, and heightened perceptions; some common adverse reactions are nausea, headache, tachycardia, bruxism, and trismus. Lowering of mood is an aftereffect that is sometimes reported from 2 to 5 days after a session of ecstasy use. The acute effects of MDMA in ecstasy users have been attributed primarily to increased release and inhibited reuptake of serotonin (5-HT) and norepinephrine, along with possible release of the neuropeptide oxytocin. Repeated or high-dose MDMA/ecstasy use has been associated with tolerance, depressive symptomatology, and persisting cognitive deficits, particularly in memory tests. Animal studies have demonstrated that high doses of MDMA can lead to long-term decreases in forebrain 5-HT concentrations, tryptophan hydroxylase activity, serotonin transporter (SERT) expression, and visualization of axons immunoreactive for 5-HT or SERT. These neurotoxic effects may reflect either a drug-induced degeneration of serotonergic fibers or a long-lasting downregulation in 5-HT and SERT biosynthesis. Possible neurotoxicity in heavy ecstasy users has been revealed by neuroimaging studies showing reduced SERT binding and increased 5-HT2A receptor binding in several cortical and/or subcortical areas. MDMA overdose or use with certain other drugs can also cause severe morbidity and even death. Repeated use of MDMA may lead to dose escalation and the development of dependence, although such dependence is usually not as profound as is seen with many other drugs of abuse. MDMA/ecstasy-dependent patients are treated with standard addiction programs, since there are no specific programs for this substance and no proven

  7. Double-disc gate valve

    DOEpatents

    Wheatley, Seth J.

    1979-01-01

    This invention relates to an improvement in a conventional double-disc gate valve having a vertically movable gate assembly including a wedge, spreaders slidably engaged therewtih, a valve disc carried by the spreaders. When the gate assembly is lowered to a selected point in the valve casing, the valve discs are moved transversely outward to close inlet and outlet ports in the casing. The valve includes hold-down means for guiding the disc-and-spreader assemblies as they are moved transversely outward and inward. If such valves are operated at relatively high differential pressures, they sometimes jam during opening. Such jamming has been a problem for many years in gate valves used in gaseous diffusion plants for the separtion of uranium isotopes. The invention is based on the finding that the above-mentioned jamming results when the outlet disc tilts about its horizontal axis in a certain way during opening of the valve. In accordance with the invention, tilting of the outlet disc is maintained at a tolerable value by providing the disc with a rigid downwardly extending member and by providing the casing with a stop for limiting inward arcuate movement of the member to a preselected value during opening of the valve.

  8. Innovative Stemless Valve Eliminates Emissions

    NASA Technical Reports Server (NTRS)

    2008-01-01

    Big Horn Valve Inc. (BHVI), of Sheridan, Wyoming, won a series of SBIR and Small Business Technology Transfer (STTR) contracts with Kennedy Space Center and Marshall Space Flight Center to explore and develop a revolutionary valve technology. BHVI developed a low-mass, high-efficiency, leak-proof cryogenic valve using composites and exotic metals, and had no stem-actuator, few moving parts, with an overall cylindrical shape. The valve has been installed at a methane coal gas field, and future applications are expected to include in-flight refueling of military aircraft, high-volume gas delivery systems, petroleum refining, and in the nuclear industry.

  9. Potential flow in engine valves

    NASA Technical Reports Server (NTRS)

    Eck, Bruno

    1925-01-01

    The extensive applicability of the hydrodynamic theory to the problems of engine construction is clearly shown in the following attempt to determine by exact methods the nature of the flow in valves under variously restricted conditions. Observation shows that two principal kinds of flow occur in simple flat-seated valves. For small valve lifts, the flow is along the horizontal wall and is therefore deflected 90 degrees, but for greater valve lifts the flow separates and forms a free stream, whose angle of deflection naturally increases with increasing lift. Both these kinds of flow can, in fact, be theoretically explained

  10. Prosthetic valve endocarditis: an overview.

    PubMed

    Gnann, J W; Dismukes, W E

    1983-12-01

    Infection of an intracardiac prosthesis, the incidence of which is about 2.5% among patients having undergone valve replacement, is a serious complication with considerable morbidity and mortality. Early prosthetic valve endocarditis (PVE), with an onset within 60 days of valve replacement, accounts for approximately one-third of all cases, while the remaining two-thirds, occur more than two months postoperatively (late prosthetic valve endocarditis). Prosthetic valve endocarditis is most commonly caused by Staphylococcus epidermidis, less frequently by viridans streptococci, Staphylococcus aureus, and gram-negative bacilli. The most likely pathogenetic mechanisms in prosthetic valve endocarditis are intraoperative contamination and postoperative infections at extracardiac sites. Prominent clinical features include fever, new or changing heart murmurs, leukocytosis, anemia and hematuria. The etiologic microorganism can be isolated in more than 90% of all cases. Patients with proven prosthetic valve endocarditis should be examined daily to detect signs of congestive heart failure and changes in murmurs; electrocardiographic monitoring is essential for documentation of arrhythmias. With limitations, echocardiography, especially two-dimensional, may help to demonstrate vegetations or valvular dehiscence. Cinefluoroscopy may reveal loosening or dehiscence of the sewing ring or impaired motion of a radio-opaque poppet due to thrombus or vegetation. Cardiac catheterization, not always necessary even when surgical intervention is anticipated, may provide valuable information on the degree of dysfunction, multiple valve involvement, left ventricular function and extent of concomitant coronary artery disease. In patients with mechanical valves, prosthetic valve endocarditis may be associated with a high incidence of valve ring and myocardial abscesses; the reported frequency of valve ring abscesses is lower with porcine heterografts. Infections on mechanical valves

  11. Latest design of gate valves

    SciTech Connect

    Kurzhofer, U.; Stolte, J.; Weyand, M.

    1996-12-01

    Babcock Sempell, one of the most important valve manufacturers in Europe, has delivered valves for the nuclear power industry since the beginning of the peaceful application of nuclear power in the 1960s. The latest innovation by Babcock Sempell is a gate valve that meets all recent technical requirements of the nuclear power technology. At the moment in the United States, Germany, Sweden, and many other countries, motor-operated gate and globe valves are judged very critically. Besides the absolute control of the so-called {open_quotes}trip failure,{close_quotes} the integrity of all valve parts submitted to operational forces must be maintained. In case of failure of the limit and torque switches, all valve designs have been tested with respect to the quality of guidance of the gate. The guidances (i.e., guides) shall avoid a tilting of the gate during the closing procedure. The gate valve newly designed by Babcock Sempell fulfills all these characteristic criteria. In addition, the valve has cobalt-free seat hardfacing, the suitability of which has been proven by friction tests as well as full-scale blowdown tests at the GAP of Siemens in Karlstein, West Germany. Babcock Sempell was to deliver more than 30 gate valves of this type for 5 Swedish nuclear power stations by autumn 1995. In the presentation, the author will report on the testing performed, qualifications, and sizing criteria which led to the new technical design.

  12. Fluid mechanics of heart valves.

    PubMed

    Yoganathan, Ajit P; He, Zhaoming; Casey Jones, S

    2004-01-01

    Valvular heart disease is a life-threatening disease that afflicts millions of people worldwide and leads to approximately 250,000 valve repairs and/or replacements each year. Malfunction of a native valve impairs its efficient fluid mechanic/hemodynamic performance. Artificial heart valves have been used since 1960 to replace diseased native valves and have saved millions of lives. Unfortunately, despite four decades of use, these devices are less than ideal and lead to many complications. Many of these complications/problems are directly related to the fluid mechanics associated with the various mechanical and bioprosthetic valve designs. This review focuses on the state-of-the-art experimental and computational fluid mechanics of native and prosthetic heart valves in current clinical use. The fluid dynamic performance characteristics of caged-ball, tilting-disc, bileaflet mechanical valves and porcine and pericardial stented and nonstented bioprostheic valves are reviewed. Other issues related to heart valve performance, such as biomaterials, solid mechanics, tissue mechanics, and durability, are not addressed in this review.

  13. All metal valve structure for gas systems

    DOEpatents

    Baker, Ray W.; Pawlak, Donald A.; Ramey, Alford J.

    1984-11-13

    A valve assembly with a resilient metal seat member is disclosed for providing a gas-tight seal in a gas handling system. The valve assembly also includes a valve element for sealing against the valve seat member; and an actuating means for operating the valve element. The valve seat member is a one-piece stainless steel ring having a central valve port and peripheral mounting flange, and an annular corrugation in between. A groove between the first and second ridges serves as a flexure zone during operation of the valve member and thus provides the seating pressure between the inner ridge or valve seat and the valve element. The outer annular ridge has a diameter less than said valve element to limit the seating motion of the valve element, preventing non-elastic deformation of the seat member.

  14. Heart Valve Surgery Recovery and Follow Up

    MedlinePlus

    ... Venous Thromboembolism Aortic Aneurysm More Heart Valve Surgery Recovery and Follow Up Updated:Sep 14,2016 What to expect after heart valve surgery The normal recovery time after a heart valve surgery is usually ...

  15. 49 CFR 195.116 - Valves.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ...) Each valve must be both hydrostatically shell tested and hydrostatically seat tested without leakage to... the position of the valve (open, closed, etc.). (f) Each valve must be marked on the body or...

  16. 241-AN-B valve pit manifold valves and position indication acceptance test procedure

    SciTech Connect

    VANDYKE, D.W.

    1999-08-25

    This document describes the method used to test design criteria for gear actuated ball valves installed in 241-AN-B Valve Pit located at 200E Tank Farms. The purpose of this procedure is to demonstrate the following: Equipment is properly installed, labeled, and documented on As-Built drawings; New Manifold Valves in the 241-AN-B Valve Pit are fully operable using the handwheel of the valve operators; New valve position indicators on the valve operators will show correct valve positions; New valve position switches will function properly; and New valve locking devices function properly.

  17. 241-AN-A valve pit manifold valves and position indication acceptance test procedure

    SciTech Connect

    VANDYKE, D.W.

    1999-08-25

    This document describes the method used to test design criteria for gear actuated ball valves installed in 241-AN-A Valve Pit located at 200E Tank Farms. The purpose of this procedure is to demonstrate the following: Equipment is properly installed, labeled, and documented on As-Built drawings; New Manifold Valves in the 241-AN-A Valve Pit are fully operable using the handwheel of the valve operators; New valve position indicators on the valve operators will show correct valve positions; New valve position switches will function properly; and New valve locking devices function properly.

  18. Rotary selector valve

    SciTech Connect

    Jones, J.A.; Herndon, J.W.

    1991-02-05

    This paper discusses a multi-port valve which internally supports a rotatable trunnion having an elbow passage between a nozzle portion of the trunnion and a lower end outlet that communicates with a test port of the valve body. The outer end of the nozzle has an axially reciprocable hollow seal piston with a seal support ring whose outer face is formed with an endless groove to receive an O-ring. An actuating shaft is coaxially mounted in an upper end of the trunnion and has a lower end with an eccentric pin engaged in a slot of the seal piston to reciprocate the seal piston into and out of sealing registration around a port selected by rotation of the trunnion. External ends of the actuating shaft and trunnion are respectively drivably coupled to a coaxial sprocket wheel and geneva wheel. A housing on top of the valve contains an input rotor fitted with a cam and a drive roller for engaging radial slots of the geneva wheel alternately with cam engagement of the dwell notches of the geneva wheel. Concurrently and in advance of forward rotation of the geneva wheel, a rotor driven seal actuating yoke a free end engages one of a series of radial slots of the sprocket to rotate the sprocket in a retrograde direction to disengage the seal. When the yoke is disengaged, a detent mechanism temporarily locks the geneva and sprocket wheels together for co-rotation in a forward direction as the geneva drive roller again comes into engagement with the geneva wheel. After the nozzle has been advanced one step, further rotation of the input rotor advances an arm independently pivotally mounted on the yoke to compress a spring mechanism to bias the yoke and sprocket to compress the seal on a seat around the next port.

  19. Overhead-valve engine

    SciTech Connect

    Tamba, S.; Miyake, H.; Fukui, N.

    1987-05-05

    An overhead valve engine is described comprising: push rod receiving bores, at least one of the push rod receiving bores being maintained in communication at one end with a crank chamber and at an opposite end with a rocker arm chamber and at least one other push rod receiving bore being maintained in communication with the rocker arm chamber; push rods contained within push rod receiving bores; and a breather chamber in communication with at least one other push rod receiving bore in the vicinity of a camshaft.

  20. Mitral valve surgery - minimally invasive

    MedlinePlus

    ... Saunders; 2012:chap 61. Otto CM, Bonow RO. Valvular heart disease. In: Mann DL, Zipes DP, Libby P, Bonow ... Editorial team. Related MedlinePlus Health Topics Heart Surgery Heart Valve Diseases Mitral Valve Prolapse Browse the Encyclopedia A.D. ...

  1. Valve-"Health"-Monitoring System

    NASA Technical Reports Server (NTRS)

    Jensen, Scott L.; Drouant, George J.

    2009-01-01

    A system that includes sensors and data acquisition, wireless data-communication, and data-processing subsystems has been developed as a means of both real-time and historical tracking of information indicative of deterioration in the mechanical integrity and performance of a highgeared ball valve or a linearly actuated valve that operates at a temperature between cryogenic and ambient.

  2. Valve designed with elastic seat

    NASA Technical Reports Server (NTRS)

    Mac Glashan, W. F., Jr.

    1965-01-01

    Absolute valve closure is accomplished by a machined valve with an axially annular channel which changes the outlet passage into a thin tubular elastic seat member with a retainer backup ring. The elasticity of the seat provides tight conformity to ball irregularity.

  3. Variable gas leak rate valve

    DOEpatents

    Eernisse, Errol P.; Peterson, Gary D.

    1976-01-01

    A variable gas leak rate valve which utilizes a poled piezoelectric element to control opening and closing of the valve. The gas flow may be around a cylindrical rod with a tubular piezoelectric member encircling the rod for seating thereagainst to block passage of gas and for reopening thereof upon application of suitable electrical fields.

  4. Air flow through poppet valves

    NASA Technical Reports Server (NTRS)

    Lewis, G W; Nutting, E M

    1920-01-01

    Report discusses the comparative continuous flow characteristics of single and double poppet valves. The experimental data presented affords a direct comparison of valves, single and in pairs of different sizes, tested in a cylinder designed in accordance with current practice in aviation engines.

  5. Surge-damping vacuum valve

    DOEpatents

    Bullock, Jack C.; Kelly, Benjamin E.

    1980-01-01

    A valve having a mechanism for damping out flow surges in a vacuum system which utilizes a slotted spring-loaded disk positioned adjacent the valve's vacuum port. Under flow surge conditions, the differential pressure forces the disk into sealing engagement with the vacuum port, thereby restricting the flow path to the slots in the disk damping out the flow surge.

  6. FLUID PURIFIER AND SEALING VALVE

    DOEpatents

    Swanton, W.F.

    1962-04-24

    An improved cold trap designed to condense vapors and collect foreign particles in a flowing fluid is described. In the arrangement, a valve is provided to prevent flow reversal in case of pump failure and to act as a sealing valve. Provision is made for reducing the temperature of the fluid being processed, including a pre-cooling stage. (AEC)

  7. Heimlich valve for chest drainage.

    PubMed

    Heimlich, H J

    1983-01-01

    The Heimlich chest drainage valve was developed so that the process of draining the pleural cavity could be accomplished in a safe, relatively simple, and efficient manner. Replacing the cumbersome underwater drainage bottle system, the Heimlich valve connects to chest tubing and allows fluid and air to pass in one direction only. The valve, which functions in any position, need never be clamped, and regulated suction can be attached to it if necessary. The valve drains into a plastic bag that can be held at any level, allowing the patient undergoing chest drainage to be ambulatory simply by carrying the bag. The construction and function of the valve is easily understood by medical and nursing staffs. It is presterilized, stored in a sterile package, and readily utilized on emergency vehicles and in the operating room.

  8. Electro-Mechanical Coaxial Valve

    NASA Technical Reports Server (NTRS)

    Patterson, Paul R (Inventor)

    2004-01-01

    Coaxial valves usually contain only one moving part. It has not been easy, then, to provide for electric motor actuation. Many actuators being proposed involve designs which lead to bulky packages. The key facing those improving coaxial valves is the provision of suitable linear actuation. The valve herein indudes a valve housing with a flow channel there-through. Arranged in the flow channel is a closing body. In alignment with the closing body is a ball screw actuator which includes a ball nut and a cylindrical screw. The ball nut sounds a threaded portion of the cylindrical screw. The cylindrical screw is provided with a passageway there-through through which fluid flows. The cylindrical screw is disposed in the flow channel to become a control tube adapted to move toward and away from the valve seat. To rotate the ball nut an actuating drive is employed driven by a stepper motor.

  9. Titanium aluminide automotive engine valves

    SciTech Connect

    Hartfield-Wuensch, S.E.; Sperling, A.A.; Morrison, R.S.; Dowling, W.E. Jr.; Allison, J.E.

    1995-12-31

    The low density and high elevated temperature strength make titanium aluminide alloys an excellent candidate for automotive exhaust valve applications. Lighter weight valve train components allow either improved performance or reduction of valve spring loads which reduce noise and friction, thereby improving fuel economy. The key to successful application of TiAl alloys for automotive engine valves is not optimization of strength and ductility, but rather the development of a low-cost, high-volume manufacturing method. Different manufacturing approaches will be discussed in this paper, along with their advantages and disadvantages. Currently, casting appears to be the lowest-cost alternative that produces adequate material properties and emphasis is being placed on this manufacturing approach. The results of several successful engine tests will also be discussed, including results on a binary TiAl alloy. However, these engine tests have indicated that TiAl alloy valves will require tip protection and stem coating.

  10. A Parylene MEMS Electrothermal Valve

    PubMed Central

    Li, Po-Ying; Givrad, Tina K.; Holschneider, Daniel P.; Maarek, Jean-Michel I.; Meng, Ellis

    2011-01-01

    The first microelectromechanical-system normally closed electrothermal valve constructed using Parylene C is described, which enables both low power (in milliwatts) and rapid operation (in milliseconds). This low-power valve is well suited for applications in wirelessly controlled implantable drug-delivery systems. The simple design was analyzed using both theory and modeling and then characterized in benchtop experiments. Operation in air (constant current) and water (current ramping) was demonstrated. Valve-opening powers of 22 mW in air and 33 mW in water were obtained. Following integration of the valve with catheters, our valve was applied in a wirelessly operated microbolus infusion pump, and the in vivo functionality for the appropriateness of use of this pump for future brain mapping applications in small animals was demonstrated. PMID:21350679

  11. Atmospheric dump valve engineering analysis

    SciTech Connect

    Mendoza, B.; McNemar, P.

    1990-01-01

    This report documents the activities undertaken after the atmospheric dump valves (ADVs) failed to operate following a Unit 3 reactor trip. The activities consisted of testing valves in all three units, examining Palo Verde Nuclear Generating Station (PVNGS) history with the valves, determining causes for failures, and making recommendations. The PVNGS engineering departments performed an in-depth review of the history, operation, maintenance, and design of ADVs. A preliminary mathematical model of the valves' dynamic behavior was developed by Arizona State University. The corrective actions are designed to eliminate the anomalies noted with the Unit 1 and 3 ADVs. Subsequent monitoring and testing activities following the planned modifications will ensure the ADVs remain operable during modes required by the PVNGS technical specifications. Through this increased monitoring and testing program, the valve modifications will be evaluated to confirm that the required level of reliability has been reached for the ADVs. The specific failures have been evaluated and the causes determined.

  12. Dynamic Spin Valve

    NASA Astrophysics Data System (ADS)

    Demirtas, Sezen; Koymen, Ali; Salamon, Myron

    2010-03-01

    In this study we investigate a dynamic extension of well known classic spin valves. Ultra thin films were dc sputtered in a UHV chamber and their dynamic responses were measured by ferromagnetic resonance (FMR). Two Co layers, separated by a nonmagnetic Ag layer--thick enough to suppress exchange coupling--were deposited, with one of them coupled to a Gd underlayer, forming a Co(1)/Ag/Co(2)/Gd multilayer. At room temperature both Co(1) and Co(2) FMR's are observed for the external magnetic field in the plane of the film. The field for resonance of Co(2) is reduced significantly relative to Co(1), with the paramagnetic moment of the Gd apparently added to the Co magnetization, and the linewidth is broader. Spin pumping effects are minimal since Co(1) and Co(2) do not resonate at the same field.. The Co(2) FMR disappears at the TC of Gd leaving the linewidth of the Co(1) FMR weakly temperature dependent down to the compensation temperature of the Co(2)/Gd bilayer. Below that point, the two Co layers in this dynamic spin valve device are in antiparallel alignment, leading to strong broadening of the Co(1) FMR with decreasing temperature.

  13. Recirculating valve lash adjuster

    SciTech Connect

    Stoody, R.R.

    1987-02-24

    This patent describes an internal combustion engine with a valve assembly of the type including overhead valves supported by a cylinder head for opening and closing movements in a substantially vertical direction and a rotatable overhead camshaft thereabove lubricated by engine oil pumped by an engine oil pump. A hydraulic lash adjuster with an internal reservoir therein is solely supplied with run-off lubricating oil from the camshaft which oil is pumped into the internal reservoir of the lash adjuster by self-pumping operation of the lash adjuster produced by lateral forces thereon by the rotative operation of the camshaft comprising: a housing of the lash adjuster including an axially extending bore therethrough with a lower wall means of the housing closing the lower end thereof; a first plunger member being closely slidably received in the bore of the housing and having wall means defining a fluid filled power chamber with the lower wall means of the housing; and a second plunger member of the lash adjuster having a portion being loosely slidably received and extending into the bore of the housing for reciprocation therein. Another portion extends upwardly from the housing to operatively receive alternating side-to-side force inputs from operation of the camshaft.

  14. Mitral Valve Annuloplasty

    PubMed Central

    Rausch, Manuel K.; Bothe, Wolfgang; Kvitting, John-Peder Escobar; Swanson, Julia C.; Miller, D. Craig; Kuhl, Ellen

    2012-01-01

    Mitral valve annuloplasty is a common surgical technique used in the repair of a leaking valve by implanting an annuloplasty device. To enhance repair durability, these devices are designed to increase leaflet coaptation, while preserving the native annular shape and motion; however, the precise impact of device implantation on annular deformation, strain, and curvature is unknown. Here we quantify how three frequently used devices significantly impair native annular dynamics. In controlled in vivo experiments, we surgically implanted eleven flexible-incomplete, eleven semi-rigid-complete, and twelve rigid-complete devices around the mitral annuli of 34 sheep, each tagged with 16 equally-spaced tantalum markers. We recorded four-dimensional marker coordinates using biplane videofluoroscopy, first with device and then without, which were used to create mathematical models using piecewise cubic splines. Clinical metrics (characteristic anatomical distances) revealed significant global reduction in annular dynamics upon device implantation. Mechanical metrics (strain and curvature fields) explained this reduction via a local loss of anterior dilation and posterior contraction. Overall, all three devices unfavorably reduced annular dynamics. The flexible-incomplete device, however, preserved native annular dynamics to a larger extent than the complete devices. Heterogeneous strain and curvature profiles suggest the need for heterogeneous support, which may spawn more rational design of annuloplasty devices using design concepts of functionally graded materials. PMID:22037916

  15. 46 CFR 131.845 - Instructions for shift of steering gear.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... specify that each steering wheel or lever, and each rudder, must be amidships before any shift of steering gear or steering stations. (d) Each clutch, gear, wheel, lever, valve, or switch used during any...

  16. 46 CFR 131.845 - Instructions for shift of steering gear.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... specify that each steering wheel or lever, and each rudder, must be amidships before any shift of steering gear or steering stations. (d) Each clutch, gear, wheel, lever, valve, or switch used during any...

  17. 46 CFR 131.845 - Instructions for shift of steering gear.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... specify that each steering wheel or lever, and each rudder, must be amidships before any shift of steering gear or steering stations. (d) Each clutch, gear, wheel, lever, valve, or switch used during any...

  18. 46 CFR 131.845 - Instructions for shift of steering gear.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... specify that each steering wheel or lever, and each rudder, must be amidships before any shift of steering gear or steering stations. (d) Each clutch, gear, wheel, lever, valve, or switch used during any...

  19. Self-Rupturing Hermetic Valve

    NASA Technical Reports Server (NTRS)

    Tucker, Curtis E., Jr.; Sherrit, Stewart

    2011-01-01

    For commercial, military, and aerospace applications, low-cost, small, reliable, and lightweight gas and liquid hermetically sealed valves with post initiation on/off capability are highly desirable for pressurized systems. Applications include remote fire suppression, single-use system-pressurization systems, spacecraft propellant systems, and in situ instruments. Current pyrotechnic- activated rupture disk hermetic valves were designed for physically larger systems and are heavy and integrate poorly with portable equipment, aircraft, and small spacecraft and instrument systems. Additionally, current pyrotechnically activated systems impart high g-force shock loads to surrounding components and structures, which increase the risk of damage and can require additional mitigation. The disclosed mechanism addresses the need for producing a hermetically sealed micro-isolation valve for low and high pressure for commercial, aerospace, and spacecraft applications. High-precision electrical discharge machining (EDM) parts allow for the machining of mated parts with gaps less than a thousandth of an inch. These high-precision parts are used to support against pressure and extrusion, a thin hermetically welded diaphragm. This diaphragm ruptures from a pressure differential when the support is removed and/or when the plunger is forced against the diaphragm. With the addition of conventional seals to the plunger and a two-way actuator, a derivative of this design would allow nonhermetic use as an on/off or metering valve after the initial rupturing of the hermetic sealing disk. In addition, in a single-use hermetically sealed isolation valve, the valve can be activated without the use of potential leak-inducing valve body penetrations. One implementation of this technology is a high-pressure, high-flow-rate rupture valve that is self-rupturing, which is advantageous for high-pressure applications such as gas isolation valves. Once initiated, this technology is self

  20. Transcatheter valve-in-valve implantation for failed mitral prosthesis: the first experience in Japan.

    PubMed

    Tada, Norio; Enta, Yusuke; Sakurai, Mie; Ootomo, Tatsushi; Hata, Masaki

    2017-01-01

    An 82-year-old woman had a history of mitral valve replacement with a 25-mm MOSAIC (Medtronic, USA) for severe mitral regurgitation (MR) 8 years previously. Recently, she developed heart failure due to MR secondary to prosthetic valve failure. She underwent transcatheter valve-in-valve implantation with a 23-mm SAPIEN XT (Edwards Lifesciences, USA) to the prosthetic mitral valve by transapical approach. To our knowledge, this is the first reported case of transcatheter valve implantation for failed mitral prosthetic valve using valve-in-valve technique in Japan.

  1. 10 CFR 960.3-4 - Environmental impacts.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 4 2011-01-01 2011-01-01 false Environmental impacts. 960.3-4 Section 960.3-4 Energy... REPOSITORY Implementation Guidelines § 960.3-4 Environmental impacts. Environmental impacts shall be... process. The DOE shall mitigate significant adverse environmental impacts, to the extent...

  2. 10 CFR 960.3-4 - Environmental impacts.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Environmental impacts. 960.3-4 Section 960.3-4 Energy... REPOSITORY Implementation Guidelines § 960.3-4 Environmental impacts. Environmental impacts shall be... process. The DOE shall mitigate significant adverse environmental impacts, to the extent...

  3. 34 CFR 3.4 - Use of the seal.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 34 Education 1 2014-07-01 2014-07-01 false Use of the seal. 3.4 Section 3.4 Education Office of the Secretary, Department of Education OFFICIAL SEAL § 3.4 Use of the seal. (a) Use by any person or...) Requests by any person or organization outside of the Department for permission to use the Seal must...

  4. 34 CFR 3.4 - Use of the seal.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 34 Education 1 2013-07-01 2013-07-01 false Use of the seal. 3.4 Section 3.4 Education Office of the Secretary, Department of Education OFFICIAL SEAL § 3.4 Use of the seal. (a) Use by any person or...) Requests by any person or organization outside of the Department for permission to use the Seal must...

  5. 43 CFR 3400.3-4 - Trust protection lands.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 43 Public Lands: Interior 2 2011-10-01 2011-10-01 false Trust protection lands. 3400.3-4 Section 3400.3-4 Public Lands: Interior Regulations Relating to Public Lands (Continued) BUREAU OF LAND...: General § 3400.3-4 Trust protection lands. The regulations in this group do not apply to the leasing...

  6. 45 CFR 1210.3-4 - Initiation of termination.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 45 Public Welfare 4 2011-10-01 2011-10-01 false Initiation of termination. 1210.3-4 Section 1210.3-4 Public Welfare Regulations Relating to Public Welfare (Continued) CORPORATION FOR NATIONAL AND COMMUNITY SERVICE VISTA TRAINEE DESELECTION AND VOLUNTEER EARLY TERMINATION PROCEDURES VISTA Volunteer Early Termination § 1210.3-4 Initiation...

  7. 34 CFR 3.4 - Use of the seal.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 34 Education 1 2012-07-01 2012-07-01 false Use of the seal. 3.4 Section 3.4 Education Office of the Secretary, Department of Education OFFICIAL SEAL § 3.4 Use of the seal. (a) Use by any person or organization outside of the Department may be made only with the Department's prior written approval....

  8. 10 CFR 960.3-4 - Environmental impacts.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 4 2014-01-01 2014-01-01 false Environmental impacts. 960.3-4 Section 960.3-4 Energy DEPARTMENT OF ENERGY GENERAL GUIDELINES FOR THE PRELIMINARY SCREENING OF POTENTIAL SITES FOR A NUCLEAR WASTE REPOSITORY Implementation Guidelines § 960.3-4 Environmental impacts. Environmental impacts shall...

  9. 10 CFR 960.3-4 - Environmental impacts.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 4 2013-01-01 2013-01-01 false Environmental impacts. 960.3-4 Section 960.3-4 Energy DEPARTMENT OF ENERGY GENERAL GUIDELINES FOR THE PRELIMINARY SCREENING OF POTENTIAL SITES FOR A NUCLEAR WASTE REPOSITORY Implementation Guidelines § 960.3-4 Environmental impacts. Environmental impacts shall...

  10. 10 CFR 960.3-4 - Environmental impacts.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 4 2012-01-01 2012-01-01 false Environmental impacts. 960.3-4 Section 960.3-4 Energy DEPARTMENT OF ENERGY GENERAL GUIDELINES FOR THE PRELIMINARY SCREENING OF POTENTIAL SITES FOR A NUCLEAR WASTE REPOSITORY Implementation Guidelines § 960.3-4 Environmental impacts. Environmental impacts shall...

  11. 40 CFR 257.3-4 - Ground water.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 25 2014-07-01 2014-07-01 false Ground water. 257.3-4 Section 257.3-4... and Practices § 257.3-4 Ground water. (a) A facility or practice shall not contaminate an underground drinking water source beyond the solid waste boundary or beyond an alternative boundary specified...

  12. 40 CFR 257.3-4 - Ground water.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 25 2011-07-01 2011-07-01 false Ground water. 257.3-4 Section 257.3-4... and Practices § 257.3-4 Ground water. (a) A facility or practice shall not contaminate an underground drinking water source beyond the solid waste boundary or beyond an alternative boundary specified...

  13. 40 CFR 257.3-4 - Ground water.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 26 2013-07-01 2013-07-01 false Ground water. 257.3-4 Section 257.3-4... and Practices § 257.3-4 Ground water. (a) A facility or practice shall not contaminate an underground drinking water source beyond the solid waste boundary or beyond an alternative boundary specified...

  14. 40 CFR 257.3-4 - Ground water.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Ground water. 257.3-4 Section 257.3-4... and Practices § 257.3-4 Ground water. (a) A facility or practice shall not contaminate an underground drinking water source beyond the solid waste boundary or beyond an alternative boundary specified...

  15. 40 CFR 257.3-4 - Ground water.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 26 2012-07-01 2011-07-01 true Ground water. 257.3-4 Section 257.3-4... and Practices § 257.3-4 Ground water. (a) A facility or practice shall not contaminate an underground drinking water source beyond the solid waste boundary or beyond an alternative boundary specified...

  16. Minimally invasive aortic valve surgery

    PubMed Central

    Castrovinci, Sebastiano; Emmanuel, Sam; Moscarelli, Marco; Murana, Giacomo; Caccamo, Giuseppa; Bertolino, Emanuela Clara; Nasso, Giuseppe; Speziale, Giuseppe; Fattouch, Khalil

    2016-01-01

    Aortic valve disease is a prevalent disorder that affects approximately 2% of the general adult population. Surgical aortic valve replacement is the gold standard treatment for symptomatic patients. This treatment has demonstrably proven to be both safe and effective. Over the last few decades, in an attempt to reduce surgical trauma, different minimally invasive approaches for aortic valve replacement have been developed and are now being increasingly utilized. A narrative review of the literature was carried out to describe the surgical techniques for minimally invasive aortic valve surgery and report the results from different experienced centers. Minimally invasive aortic valve replacement is associated with low perioperative morbidity, mortality and a low conversion rate to full sternotomy. Long-term survival appears to be at least comparable to that reported for conventional full sternotomy. Minimally invasive aortic valve surgery, either with a partial upper sternotomy or a right anterior minithoracotomy provides early- and long-term benefits. Given these benefits, it may be considered the standard of care for isolated aortic valve disease. PMID:27582764

  17. Cavitation guide for control valves

    SciTech Connect

    Tullis, J.P.

    1993-04-01

    This guide teaches the basic fundamentals of cavitation to provide the reader with an understanding of what causes cavitation, when it occurs, and the potential problems cavitation can cause to a valve and piping system. The document provides guidelines for understanding how to reduce the cavitation and/or select control valves for a cavitating system. The guide provides a method for predicting the cavitation intensity of control valves, and how the effect of cavitation on a system will vary with valve type, valve function, valve size, operating pressure, duration of operation and details of the piping installation. The guide defines six cavitation limits identifying cavitation intensities ranging from inception to the maximum intensity possible. The intensity of the cavitation at each limit Is described, including a brief discussion of how each level of cavitation influences the valve and system. Examples are included to demonstrate how to apply the method, including making both size and pressure scale effects corrections. Methods of controlling cavitation are discussed providing information on various techniques which can be used to design a new system or modify an existing one so it can operate at a desired level of cavitation.

  18. Lock Culvert Valves; Hydraulic Design Considerations

    DTIC Science & Technology

    2011-06-01

    lock culvert valves with particular emphasis on reverse tainter valves. Hydraulic coefficients, used to quantify energy losses at valves and the jet...due to a sudden culvert expansion did increase the energy losses in the flow as the jet was dissipated. This additional head loss and associated...8 Figure 5. Loss coefficient for vertical-lift valve having a 45 degree lip

  19. 14 CFR 125.137 - Oil valves.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 3 2011-01-01 2011-01-01 false Oil valves. 125.137 Section 125.137....137 Oil valves. (a) Each oil valve must— (1) Comply with § 125.155; (2) Have positive stops or... the valve. (b) The closing of an oil shutoff means must not prevent feathering the propeller,...

  20. 14 CFR 125.137 - Oil valves.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 3 2014-01-01 2014-01-01 false Oil valves. 125.137 Section 125.137....137 Oil valves. (a) Each oil valve must— (1) Comply with § 125.155; (2) Have positive stops or... the valve. (b) The closing of an oil shutoff means must not prevent feathering the propeller,...

  1. 14 CFR 125.137 - Oil valves.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Oil valves. 125.137 Section 125.137....137 Oil valves. (a) Each oil valve must— (1) Comply with § 125.155; (2) Have positive stops or... the valve. (b) The closing of an oil shutoff means must not prevent feathering the propeller,...

  2. 14 CFR 125.137 - Oil valves.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 3 2012-01-01 2012-01-01 false Oil valves. 125.137 Section 125.137....137 Oil valves. (a) Each oil valve must— (1) Comply with § 125.155; (2) Have positive stops or... the valve. (b) The closing of an oil shutoff means must not prevent feathering the propeller,...

  3. 14 CFR 125.137 - Oil valves.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 3 2013-01-01 2013-01-01 false Oil valves. 125.137 Section 125.137....137 Oil valves. (a) Each oil valve must— (1) Comply with § 125.155; (2) Have positive stops or... the valve. (b) The closing of an oil shutoff means must not prevent feathering the propeller,...

  4. Thermostatic Radiator Valve Evaluation

    SciTech Connect

    Dentz, J.; Ansanelli, E.

    2015-01-01

    A large stock of multifamily buildings in the Northeast and Midwest are heated by steam distribution systems. Losses from these systems are typically high and a significant number of apartments are overheated much of the time. Thermostatically controlled radiator valves (TRVs) are one potential strategy to combat this problem, but have not been widely accepted by the residential retrofit market. In this project, the ARIES team sought to better understand the current usage of TRVs by key market players in steam and hot water heating and to conduct limited experiments on the effectiveness of new and old TRVs as a means of controlling space temperatures and reducing heating fuel consumption. The project included a survey of industry professionals, a field experiment comparing old and new TRVs, and cost-benefit modeling analysis using BEopt™ (Building Energy Optimization software).

  5. Stemless ball valve

    NASA Technical Reports Server (NTRS)

    Burgess, Kevin (Inventor); Yakos, David (Inventor); Walthall, Bryan (Inventor)

    2012-01-01

    A stemless ball valve comprising: a right flange; left flange; ball with an axis pin and two travel pins; ball seal on either side of the ball; guide sleeve with inner walls comprising two channels; cartridge guide holder; inner magnetic cartridge; and outer magnetic cartridge. The ball is situated inside of the guide sleeve, and a travel pin is located in each of the two channels. The guide sleeve is situated inside of the cartridge guide holder, which is located adjacent to and outside of the inner magnetic cartridge and secured to the inner magnetic cartridge such that when the inner magnetic cartridge rotates, the cartridge guide holder also rotates. The cartridge guide holder is secured to the guide sleeve such that when the cartridge guide holder rotates, the travel pins move within the channels in the inner walls of the guide sleeve, thereby causing the ball to rotate.

  6. Check valve with poppet damping mechanism

    NASA Technical Reports Server (NTRS)

    Morris, Brian G. (Inventor)

    1993-01-01

    An inline check valve for a flow line is presented where the valve element is guided for inline travel forward and rearward of a valve sealing member and is spring biased to a closed sealing condition. One of the guides for the valve element includes a dashpot bore and plunger member to control the rate of travel of the valve element in either direction as well as provided a guiding function. The dashpot is not anchored to the valve body so that the valve can be functional even if the plunger member becomes jammed in the dashpot.

  7. Check valve with poppet damping mechanism

    NASA Astrophysics Data System (ADS)

    Morris, Brian G.

    1993-08-01

    An inline check valve for a flow line is presented where the valve element is guided for inline travel forward and rearward of a valve sealing member and is spring biased to a closed sealing condition. One of the guides for the valve element includes a dashpot bore and plunger member to control the rate of travel of the valve element in either direction as well as provided a guiding function. The dashpot is not anchored to the valve body so that the valve can be functional even if the plunger member becomes jammed in the dashpot.

  8. Check valve with poppet damping mechanism

    NASA Astrophysics Data System (ADS)

    Morris, Brian G.

    1992-06-01

    An inline check valve for a flow line is presented where the valve element is guided for inline travel forward and rearward of a valve sealing member and is spring biased to a closed sealing condition. One of the guides for the valve element includes a dashpot bore and plunger member to control the rate of travel of the valve element in either direction as well as provided a guiding function. The dashpot is not anchored to the valve body so that the valve can be functional even if the plunger member becomes jammed in the dashpot.

  9. Multi-port valve

    DOEpatents

    Lewin, Keith F.

    1997-04-15

    A multi-port valve for regulating, as a function of ambient air having varying wind velocity and wind direction in an open-field control area, the distribution of a fluid, particularly carbon dioxide (CO.sub.2) gas, in a fluid distribution system so that the control area remains generally at an elevated fluid concentration or level of said fluid. The multi-port valve generally includes a multi-port housing having a plurality of outlets therethrough disposed in a first pattern of outlets and at least one second pattern of outlets, and a movable plate having a plurality of apertures extending therethrough disposed in a first pattern of apertures and at least one second pattern of apertures. The first pattern of apertures being alignable with the first pattern of outlets and the at least one second pattern of apertures being alignable with the second pattern of outlets. The first pattern of apertures has a predetermined orientation with the at least one second pattern of apertures. For an open-field control area subject to ambient wind having a low velocity from any direction, the movable plate is positioned to equally distribute the supply of fluid in a fluid distribution system to the open-field control area. For an open-field control area subject to ambient wind having a high velocity from a given direction, the movable plate is positioned to generally distribute a supply of fluid in a fluid distribution system to that portion of the open-field control area located upwind.

  10. Multi-port valve

    DOEpatents

    Lewin, K.F.

    1997-04-15

    A multi-port valve is described for regulating, as a function of ambient air having varying wind velocity and wind direction in an open-field control area, the distribution of a fluid, particularly carbon dioxide (CO{sub 2}) gas, in a fluid distribution system so that the control area remains generally at an elevated fluid concentration or level of said fluid. The multi-port valve generally includes a multi-port housing having a plurality of outlets there through disposed in a first pattern of outlets and at least one second pattern of outlets, and a movable plate having a plurality of apertures extending there through disposed in a first pattern of apertures and at least one second pattern of apertures. The first pattern of apertures being alignable with the first pattern of outlets and the at least one second pattern of apertures being alignable with the second pattern of outlets. The first pattern of apertures has a predetermined orientation with the at least one second pattern of apertures. For an open-field control area subject to ambient wind having a low velocity from any direction, the movable plate is positioned to equally distribute the supply of fluid in a fluid distribution system to the open-field control area. For an open-field control area subject to ambient wind having a high velocity from a given direction, the movable plate is positioned to generally distribute a supply of fluid in a fluid distribution system to that portion of the open-field control area located upwind. 7 figs.

  11. Ferroelectric Fluid Flow Control Valve

    NASA Technical Reports Server (NTRS)

    Jalink, Antony, Jr. (Inventor); Hellbaum, Richard F. (Inventor); Rohrbach, Wayne W. (Inventor)

    1999-01-01

    An active valve is controlled and driven by external electrical actuation of a ferroelectric actuator to provide for improved passage of the fluid during certain time periods and to provide positive closure of the valve during other time periods. The valve provides improved passage in the direction of flow and positive closure in the direction against the flow. The actuator is a dome shaped internally prestressed ferroelectric actuator having a curvature, said dome shaped actuator having a rim and an apex. and a dome height measured from a plane through said rim said apex that varies with an electric voltage applied between an inside and an outside surface of said dome shaped actuator.

  12. Fluid relief and check valve

    DOEpatents

    Blaedel, K.L.; Lord, S.C.; Murray, I.

    1986-07-17

    A passive fluid pressure relief and check valve allows the relief pressure to be slaved to a reference pressure independently of the exhaust pressure. The pressure relief valve is embodied by a submerged vent line in a sealing fluid, the relief pressure being a function of the submerged depth. A check valve is embodied by a vertical column of fluid (the maximum back pressure being a function of the height of the column of fluid). The pressure is vented into an exhaust system which keeps the exhaust out of the area providing the reference pressure.

  13. FLUID PRESSURE AND CAM OPERATED VACUUM VALVE

    DOEpatents

    Batzer, T.H.

    1963-11-26

    An ultra-high vacuum valve that is bakable, reusable, and capable of being quickly opened and closed is described. A translationally movable valve gate having an annular ridge is adapted to contact an annular soft metal gasket disposed at the valve seat such that the soft metal gasket extends beyond the annular ridge on all sides. The valve gate is closed, by first laterally aligning the valve gate with the valve seat and then bringing the valve gate and valve seat into seating contact by the translational movement of a ramp-like wedging means that engages similar ramp-like stractures at the base of the valve gate to force the valve gate into essentially pressureless contact with the annular soft metal gasket. This gasket is then pressurized from beneath by a fluid thereby effecting a vacuura tight seal between the gasket and the ridge. (AEC)

  14. Shifting sugars and shifting paradigms.

    PubMed

    Siegal, Mark L

    2015-02-01

    No organism lives in a constant environment. Based on classical studies in molecular biology, many have viewed microbes as following strict rules for shifting their metabolic activities when prevailing conditions change. For example, students learn that the bacterium Escherichia coli makes proteins for digesting lactose only when lactose is available and glucose, a better sugar, is not. However, recent studies, including three PLOS Biology papers examining sugar utilization in the budding yeast Saccharomyces cerevisiae, show that considerable heterogeneity in response to complex environments exists within and between populations. These results join similar recent results in other organisms that suggest that microbial populations anticipate predictable environmental changes and hedge their bets against unpredictable ones. The classical view therefore represents but one special case in a range of evolutionary adaptations to environmental changes that all organisms face.

  15. Energy conservation with automatic flow control valves

    SciTech Connect

    Phillips, D.

    1984-12-01

    Automatic flow control valves are offered in a wide range of sizes starting at 1/2 in. with flow rates of 0.5 gpm and up. They are also provided with materials and end connections to meet virtually any fan-coil system requirement. Among these are copper sweat type valves; ductile iron threaded valves; male/female threaded brass valves; and combination flow control/ball valves with union ends.

  16. Spectral behavior study of 3-(4-dimethylamino-phenyl)-1-{6-[3-(4-dimethylamino-phenyl)-acryloyl]-pyridin-2-yl}-propanone

    NASA Astrophysics Data System (ADS)

    Gaber, M.; El-Sayed, Y. S.; Diab, H.

    2011-04-01

    The photophysical properties such as singlet absorption, molar absorptivity, fluorescence spectra, fluorescence quantum yield ( ϕf) and transition dipole moment ( μ12) of 3-(4-dimethylamino-phenyl)-1-{6-[3-(4-dimethylamino-phenyl)-acryloyl]-pyridin-2-yl}-propanone (DMAPAPP) have been studied in different media. DMAPAPP exhibits a large red-shift in both absorption and emission spectra as the solvent polarity increases, indicating a large change in dipole moment of molecule upon excitation. The fluorescence quantum yield depends on the nature of the solvent. The absorption and emission spectra of DMAPAPP in dioxane-water mixture are also studied. The effect of different type of surfactants to determine their critical micellar concentration (CMC) and the microemulsion effect on the electronic absorption and emission spectra of DMAPAPP are recorded. The effect of acidity on the electronic absorption and emission spectra of DMAPAPP is studied to determine the pKa and pKa* values.

  17. Diseases of the Tricuspid Valve

    MedlinePlus

    ... Kawasaki Disease Long Q-T Syndrome Marfan Syndrome Metabolic Syndrome Mitral Valve Prolapse Myocardial Bridge Myocarditis Obstructive Sleep Apnea Pericarditis Peripheral Vascular Disease Rheumatic Fever Sick Sinus Syndrome Silent Ischemia Stroke Sudden ...

  18. What Is Heart Valve Surgery?

    MedlinePlus

    ... valve separates the left ventricle (your heart’s main pumping chamber) and the aorta (the major artery that ... surgery, you‘ll go to an intensive care unit (ICU). •Your family can visit you briefly in ...

  19. Simpler valve for reciprocating engines

    NASA Technical Reports Server (NTRS)

    Akkerman, J. W.

    1978-01-01

    Simpler design eliminating camshafts, cams, and mechanical springs should improve reliability of hydrazine powered reciprocating engines. Valve is expected to improve efficiency, and reduce weight of engines in range up to 50 horsepower.

  20. Mitral Valve Prolapse (For Parents)

    MedlinePlus

    ... Atrial Septal Defect Ventricular Septal Defect Heart and Circulatory System Congenital Heart Defects Getting an EKG (Video) Your Heart & Circulatory System Heart Murmurs Marfan Syndrome Mitral Valve Prolapse EKG ( ...

  1. Bipropellant shut-off valve

    NASA Technical Reports Server (NTRS)

    Smith, J. V.

    1971-01-01

    An advanced design of an all metal, fast response, bipropellant, shut-off valve for use on long duration space missions is reported. The valve provides the flow control capability for a 1,000 lb thrust, bipropellant engine using oxygen difluoride and diborane as propellants. The shutoff seal selection is a soft-on-hard metal concept. The soft seal is a spherical shell that seats against a hard conical seat. Beryllium copper and beryllium nickel seals were selected to seal against an electrolyzed Inconel 718 seat. Poppet shaft sealing is achieved by use of hydroformed, Inconel 718 bellows. Two valve assemblies were fabricated and subjected to a series of tests including leak, response time, flow capacity, dry cycles, water cycles, liquid nitrogen cycles, liquid fluorine cycles, and lead-lag operation cycles. These tests demonstrated the ability of the valve to meet design goals.

  2. Liquid-blocking check valve

    DOEpatents

    Merrill, J.T.

    1982-09-27

    A liquid blocking check valve useful particularly in a pneumatic system utilizing a pressurized liquid fill chamber. The valve includes a floatable ball disposed within a housing defining a chamber. The housing is provided with an inlet aperture disposed in the top of said chamber, and an outlet aperture disposed in the bottom of said chamber in an offset relation to said inlet aperture and in communication with a cutaway side wall section of said housing.

  3. Prosthetic valve endocarditis. A survey.

    PubMed Central

    Ben Ismail, M; Hannachi, N; Abid, F; Kaabar, Z; Rougé, J F

    1987-01-01

    Fifty eight patients (aged 8-59 years, mean 27) treated for prosthetic valve endocarditis from January 1966 to January 1985 were studied retrospectively by review of case notes. There were 12 cases of early and 46 cases of late prosthetic valve endocarditis. These developed in 28 patients with an isolated aortic valve, in 26 with an isolated mitral valve, and in four with both aortic and mitral prosthetic valves. Streptococci were the most commonly isolated microorganisms, followed by staphylococci, Gram negative bacteria, and fungi. A surgical (34 cases) or a necropsy specimen (10 cases) from 44 cases was examined. Eighty two per cent of the patients had congestive heart failure. Twenty four of the 58 patients were medically treated and 17 died (70% mortality). Combined medical and surgical treatment was used in 34 patients; the main indication for surgery was congestive heart failure. Fourteen patients on combined treatment died (40% mortality). Persistent sepsis and prosthetic valve dehiscence were the most common early and late operative complications. The most important influences on outcome were congestive heart failure, the type of micro-organism, the severity and extent of anatomical lesions, the time of onset of prosthetic valve endocarditis, and the type of treatment. This survey indicates that only patients without congestive heart failure or embolic complications and with sensitive micro-organism should be treated medically. In view of the poor prognosis patients with prosthetic valve endocarditis associated with congestive heart failure, persistent sepsis, and repeat arterial emboli should be treated by early surgical intervention. PMID:3620246

  4. 3D Bioprinting of Heterogeneous Aortic Valve Conduits with Alginate/Gelatin Hydrogels

    PubMed Central

    Duan, Bin; Hockaday, Laura A.; Kang, Kevin H.; Butcher, Jonathan T.

    2013-01-01

    Heart valve disease is a serious and growing public health problem for which prosthetic replacement is most commonly indicated. Current prosthetic devices are inadequate for younger adults and growing children. Tissue engineered living aortic valve conduits have potential for remodeling, regeneration, and growth, but fabricating natural anatomical complexity with cellular heterogeneity remain challenging. In the current study, we implement 3D bioprinting to fabricate living alginate/gelatin hydrogel valve conduits with anatomical architecture and direct incorporation of dual cell types in a regionally constrained manner. Encapsulated aortic root sinus smooth muscle cells (SMC) and aortic valve leaflet interstitial cells (VIC) were viable within alginate/gelatin hydrogel discs over 7 days in culture. Acellular 3D printed hydrogels exhibited reduced modulus, ultimate strength, and peak strain reducing slightly over 7-day culture, while the tensile biomechanics of cell-laden hydrogels were maintained. Aortic valve conduits were successfully bioprinted with direct encapsulation of SMC in the valve root and VIC in the leaflets. Both cell types were viable (81.4±3.4% for SMC and 83.2±4.0% for VIC) within 3D printed tissues. Encapsulated SMC expressed elevated alpha-smooth muscle actin when printed in stiff matrix, while VIC expressed elevated vimentin in soft matrix. These results demonstrate that anatomically complex, heterogeneously encapsulated aortic valve hydrogel conduits can be fabricated with 3D bioprinting. PMID:23015540

  5. Noninvasive valve monitor using alternating electromagnetic field

    DOEpatents

    Eissenberg, David M.; Haynes, Howard D.; Casada, Donald A.

    1993-01-01

    One or more electrical coils are carefully located on the outside of a valve body. An alternating current passing through the coil(s) results in an alternating electromagnetic field being transmitted into the valve body and valve internals. The electromagnetic field varies in intensity and polarity in the valve. As the position of a valve internal part is changed, the electromagnetic field throughout the valve body and its internals is altered. A passive receiver coil carefully located on the outside of the valve body detects the intensity of the electromagnetic field at that location as an induced electrical voltage in the coil. With the change in position of the valve internal part, there is a corresponding change in the induced voltage as a result of the alteration in the alternating electromagnetic field at that location. Changes in the voltage provide an indication of the position and motion of valve internals.

  6. Noninvasive valve monitor using alternating electromagnetic field

    DOEpatents

    Eissenberg, D.M.; Haynes, H.D.; Casada, D.A.

    1993-03-16

    One or more electrical coils are carefully located on the outside of a valve body. An alternating current passing through the coil(s) results in an alternating electromagnetic field being transmitted into the valve body and valve internals. The electromagnetic field varies in intensity and polarity in the valve. As the position of a valve internal part is changed, the electromagnetic field throughout the valve body and its internals is altered. A passive receiver coil carefully located on the outside of the valve body detects the intensity of the electromagnetic field at that location as an induced electrical voltage in the coil. With the change in position of the valve internal part, there is a corresponding change in the induced voltage as a result of the alteration in the alternating electromagnetic field at that location. Changes in the voltage provide an indication of the position and motion of valve internals.

  7. Development of an effective valve packing program

    SciTech Connect

    Hart, K.A.

    1996-12-01

    Current data now shows that graphite valve packing installed within the guidance of a controlled program produces not only reliable stem sealing but predictable running loads. By utilizing recent technological developments in valve performance monitoring for both MOV`s and AOV`s, valve packing performance can be enhanced while reducing maintenance costs. Once known, values are established for acceptable valve packing loads, the measurement of actual valve running loads via the current MOV/AOV diagnostic techniques can provide indication of future valve stem sealing problems, improper valve packing installation or identify the opportunity for valve packing program improvements. At times the full benefit of these advances in material and predictive technology remain under utilized due to simple past misconceptions associated with valve packing. This paper will explore the basis for these misconceptions, provide general insight into the current understanding of valve packing and demonstrate how with this new understanding and current valve diagnostic equipment the key aspects required to develop an effective, quality valve packing program fit together. The cost and operational benefits provided by this approach can be significant impact by the: elimination of periodic valve repacking, reduction of maintenance costs, benefits of leak-free valve operation, justification for reduced Post Maintenance Test Requirements, reduced radiation exposure, improved plant appearance.

  8. Ischemic mitral valve prolapse

    PubMed Central

    Cristiano, Spadaccio; Nenna, Antonio; Chello, Massimo

    2016-01-01

    Ischemic mitral prolapse (IMP) is a pathologic entity encountered in about one-third among the patients undergoing surgery for ischemic mitral regurgitation (IMR). IMP is generally the result of a papillary muscle injury consequent to myocardial, but the recent literature is progressively unveiling a more complex pathogenesis. The mechanisms underlying its development regards the impairment of one or more components of the mitral apparatus, which comprises the annulus, the chordae tendineae, the papillary muscle and the left ventricular wall. IMP is not only a disorder of valvular function, but also entails coexistent aspects of a geometric disturbance of the mitral valve configuration and of the left ventricular function and dimension and a correct understanding of all these aspects is crucial to guide and tailor the correct therapeutic strategy to be adopted. Localization of prolapse, anatomic features of the prolapsed leaflets and the subvalvular apparatus should be carefully evaluated as also constituting the major determinants defining patient’s outcomes. This review will summarize our current understanding of the pathophysiology and clinical evidence on IMP with a particular focus on the surgical treatment. PMID:28149574

  9. Valve-less microdispenser

    NASA Astrophysics Data System (ADS)

    Tan, Ming Kwang; Xin, Wang; Lee, Weng Kent

    2015-11-01

    We demonstrate the concept of valve-less microdispenser to control of the liquid flow through the nozzle, by incorporating Leidenfrost effect into the nozzle design. When the nozzle is heated above the Leidenfrost point, a thin vapor layer is formed between the heated substrate and the liquid above it. The vapor pressure due to the presence of the vapor layer, together with the effect of surface tension of the liquid, exerted on the liquid-vapor interface, preventing the flow of the liquid through the nozzle. The experimental results shown that nozzles of diameter 400 micrometer and below, the nozzle temperature of 150 degree Celsius is sufficient to prevent the continuous flowing of the liquid, whereas for nozzles of diameter between 400 to 500 micrometer, the nozzle temperature needs to increase to 160 degree Celsius in order to prevent the continuous flowing of the liquid. When nozzle temperature below 160 degree Celsius, intermittent ejection of microdroplets, whose size is a function of nozzle temperature, is observed.

  10. Annular flow diverter valve

    DOEpatents

    Rider, Robert L.

    1980-01-01

    A valve for diverting flow from the center of two concentric tubes to the annulus between the tubes or, operating in the reverse direction, for mixing fluids from concentric tubes into a common tube and for controlling the volume ratio of said flow consists of a toroidal baffle disposed in sliding engagement with the interior of the inner tube downstream of a plurality of ports in the inner tube, a plurality of gates in sliding engagement with the interior of the inner tube attached to the baffle for movement therewith, a servomotor having a bullet-shaped plug on the downstream end thereof, and drive rods connecting the servomotor to the toroidal baffle, the servomotor thereby being adapted to move the baffle into mating engagement with the bullet-shaped plug and simultaneously move the gates away from the ports in the inner tube and to move the baffle away from the bullet-shaped plug and simultaneously move the gates to cover the ports in the inner tube.

  11. Spring-Loaded Joule-Thomson Valve

    NASA Technical Reports Server (NTRS)

    Jones, J. A.; Britcliffe, M. J.

    1986-01-01

    Improved design reduces clogging and maintains constant pressure drop as flow rate varies. Spring-Loaded Joule-Thomson Valve pressure drop regulated by spring pushing stainless-steel ball against soft brass seat. Pressure drop remains nearly constant, regardless of helium flow rate and of any gas contaminants frozen on valve seat. Because springloaded J-T valve maintains constant pressure drop, upstream roomtemperature throttle valve adjusts flow rate precisely for any given upstream pressure. In addition, new valve relatively invulnerable to frozen gas contaminants, which clog fixed-orifice J-T valves.

  12. Valve system incorporating single failure protection logic

    DOEpatents

    Ryan, Rodger; Timmerman, Walter J. H.

    1980-01-01

    A valve system incorporating single failure protective logic. The system consists of a valve combination or composite valve which allows actuation or de-actuation of a device such as a hydraulic cylinder or other mechanism, integral with or separate from the valve assembly, by means of three independent input signals combined in a function commonly known as two-out-of-three logic. Using the input signals as independent and redundant actuation/de-actuation signals, a single signal failure, or failure of the corresponding valve or valve set, will neither prevent the desired action, nor cause the undesired action of the mechanism.

  13. 43 CFR 9269.3-4 - Range management.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 43 Public Lands: Interior 2 2011-10-01 2011-10-01 false Range management. 9269.3-4 Section 9269.3-4 Public Lands: Interior Regulations Relating to Public Lands (Continued) BUREAU OF LAND MANAGEMENT... Range management. (a) Grazing administration—exclusive of Alaska—(1) Unlawful enclosures or...

  14. 43 CFR 9269.3-4 - Range management.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 43 Public Lands: Interior 2 2013-10-01 2013-10-01 false Range management. 9269.3-4 Section 9269.3-4 Public Lands: Interior Regulations Relating to Public Lands (Continued) BUREAU OF LAND MANAGEMENT... Range management. (a) Grazing administration—exclusive of Alaska—(1) Unlawful enclosures or...

  15. 43 CFR 9269.3-4 - Range management.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 43 Public Lands: Interior 2 2014-10-01 2014-10-01 false Range management. 9269.3-4 Section 9269.3-4 Public Lands: Interior Regulations Relating to Public Lands (Continued) BUREAU OF LAND MANAGEMENT... Range management. (a) Grazing administration—exclusive of Alaska—(1) Unlawful enclosures or...

  16. 43 CFR 9269.3-4 - Range management.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 43 Public Lands: Interior 2 2012-10-01 2012-10-01 false Range management. 9269.3-4 Section 9269.3-4 Public Lands: Interior Regulations Relating to Public Lands (Continued) BUREAU OF LAND MANAGEMENT... Range management. (a) Grazing administration—exclusive of Alaska—(1) Unlawful enclosures or...

  17. 21 CFR 3.4 - Designated agency component.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 1 2013-04-01 2013-04-01 false Designated agency component. 3.4 Section 3.4 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL PRODUCT.... Where the primary mode of action is that of: (1) A drug (other than a biological product), the...

  18. 21 CFR 3.4 - Designated agency component.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 1 2012-04-01 2012-04-01 false Designated agency component. 3.4 Section 3.4 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL PRODUCT.... Where the primary mode of action is that of: (1) A drug (other than a biological product), the...

  19. 43 CFR 3162.3-4 - Well abandonment.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 43 Public Lands: Interior 2 2011-10-01 2011-10-01 false Well abandonment. 3162.3-4 Section 3162.3... Operating Rights Owners and Operators § 3162.3-4 Well abandonment. (a) The operator shall promptly plug and... newly completed or recompleted well in which oil or gas is not encountered in paying quantities or...

  20. 43 CFR 3162.3-4 - Well abandonment.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 43 Public Lands: Interior 2 2014-10-01 2014-10-01 false Well abandonment. 3162.3-4 Section 3162.3... Operating Rights Owners and Operators § 3162.3-4 Well abandonment. (a) The operator shall promptly plug and... newly completed or recompleted well in which oil or gas is not encountered in paying quantities or...

  1. 43 CFR 3162.3-4 - Well abandonment.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 43 Public Lands: Interior 2 2012-10-01 2012-10-01 false Well abandonment. 3162.3-4 Section 3162.3... Operating Rights Owners and Operators § 3162.3-4 Well abandonment. (a) The operator shall promptly plug and... newly completed or recompleted well in which oil or gas is not encountered in paying quantities or...

  2. 43 CFR 3162.3-4 - Well abandonment.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 43 Public Lands: Interior 2 2013-10-01 2013-10-01 false Well abandonment. 3162.3-4 Section 3162.3... Operating Rights Owners and Operators § 3162.3-4 Well abandonment. (a) The operator shall promptly plug and... newly completed or recompleted well in which oil or gas is not encountered in paying quantities or...

  3. BORED AND ASSEMBLED GATE VALVES RECEIVING PROTECTIVE COATING IN THE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    BORED AND ASSEMBLED GATE VALVES RECEIVING PROTECTIVE COATING IN THE VALVE PAINT BOOTH OF THE VALVE ASSEMBLY BUILDING. - Stockham Pipe & Fittings Company, Valve Assembly Building, 4000 Tenth Avenue North, Birmingham, Jefferson County, AL

  4. Determination of oxidation state of iron in normal and pathologically altered human aortic valves

    NASA Astrophysics Data System (ADS)

    Czapla-Masztafiak, J.; Lis, G. J.; Gajda, M.; Jasek, E.; Czubek, U.; Bolechała, F.; Borca, C.; Kwiatek, W. M.

    2015-12-01

    In order to investigate changes in chemical state of iron in normal and pathologically altered human aortic valves X-ray absorption spectroscopy was applied. Since Fe is suspected to play detrimental role in aortic valve stenosis pathogenesis the oxidation state of this element has been determined. The experimental material consisted of 10 μm sections of valves excised during routine surgery and from autopsies. The experiment was performed at the MicroXAS beamline of the SLS synchrotron facility in Villigen (Switzerland). The Fe K-edge XANES spectra obtained from tissue samples were carefully analyzed and compared with the spectra of reference compounds containing iron in various chemical structures. The analysis of absorption edge position and shape of the spectra revealed that both chemical forms of iron are presented in valve tissue but Fe3+ is the predominant form. Small shift of the absorption edge toward higher energy in the spectra from stenotic valve samples indicates higher content of the Fe3+ form in pathological tissue. Such a phenomenon suggests the role of Fenton reaction and reactive oxygen species in the etiology of aortic valve stenosis. The comparison of pre-edge regions of XANES spectra for control and stenotic valve tissue confirmed no differences in local symmetry or spin state of iron in analyzed samples.

  5. Analysis of Complex Valve and Feed Systems

    NASA Technical Reports Server (NTRS)

    Ahuja, Vineet; Hosangadi, Ashvin; Shipman, Jeremy; Cavallo, Peter; Dash, Sanford

    2007-01-01

    A numerical framework for analysis of complex valve systems supports testing of propulsive systems by simulating key valve and control system components in the test loop. In particular, it is designed to enhance the analysis capability in terms of identifying system transients and quantifying the valve response to these transients. This system has analysis capability for simulating valve motion in complex systems operating in diverse flow regimes ranging from compressible gases to cryogenic liquids. A key feature is the hybrid, unstructured framework with sub-models for grid movement and phase change including cryogenic cavitations. The multi-element unstructured framework offers improved predictions of valve performance characteristics under steady conditions for structurally complex valves such as pressure regulator valve. Unsteady simulations of valve motion using this computational approach have been carried out for various valves in operation at Stennis Space Center such as the split-body valve and the 10-in. (approx.25.4-cm) LOX (liquid oxygen) valve and the 4-in. (approx.10 cm) Y-pattern valve (liquid nitrogen). Such simulations make use of variable grid topologies, thereby permitting solution accuracy and resolving important flow physics in the seat region of the moving valve. An advantage to this software includes possible reduction in testing costs incurred due to disruptions relating to unexpected flow transients or functioning of valve/flow control systems. Prediction of the flow anomalies leading to system vibrations, flow resonance, and valve stall can help in valve scheduling and significantly reduce the need for activation tests. This framework has been evaluated for its ability to predict performance metrics like flow coefficient for cavitating venturis and valve coefficient curves, and could be a valuable tool in predicting and understanding anomalous behavior of system components at rocket propulsion testing and design sites.

  6. FLUID MECHANICS OF ARTIFICIAL HEART VALVES

    PubMed Central

    Dasi, Lakshmi P; Simon, Helene A; Sucosky, Philippe; Yoganathan, Ajit P

    2009-01-01

    SUMMARY 1. Artificial heart valves have been in use for over five decades to replace diseased heart valves. Since the first heart valve replacement performed with a caged-ball valve, more than 50 valve designs have been developed, differing principally in valve geometry, number of leaflets and material. To date, all artificial heart valves are plagued with complications associated with haemolysis, coagulation for mechanical heart valves and leaflet tearing for tissue-based valve prosthesis. For mechanical heart valves, these complications are believed to be associated with non-physiological blood flow patterns. 2. In the present review, we provide a bird’s-eye view of fluid mechanics for the major artificial heart valve types and highlight how the engineering approach has shaped this rapidly diversifying area of research. 3. Mechanical heart valve designs have evolved significantly, with the most recent designs providing relatively superior haemodynamics with very low aerodynamic resistance. However, high shearing of blood cells and platelets still pose significant design challenges and patients must undergo life-long anticoagulation therapy. Bioprosthetic or tissue valves do not require anticoagulants due to their distinct similarity to the native valve geometry and haemodynamics, but many of these valves fail structurally within the first 10–15 years of implantation. 4. These shortcomings have directed present and future research in three main directions in attempts to design superior artificial valves: (i) engineering living tissue heart valves; (ii) development of advanced computational tools; and (iii) blood experiments to establish the link between flow and blood damage. PMID:19220329

  7. Mechanical heart valve cavitation in patients with bileaflet valves.

    PubMed

    Johansen, Peter; Andersen, Tina S; Hasenkam, J Michael; Nygaard, Hans; Paulsen, Peter K

    2014-01-01

    Today, the quality of mechanical heart valves is quite high, and implantation has become a routine clinical procedure with a low operative mortality (< 5%). However, patients still face the risks of blood cell damage, thromboembolic events, and material failure of the prosthetic device. One mechanism found to be a possible contributor to these adverse effects is cavitation. In vitro, cavitation has been directly demonstrated by visualization and indirectly in vivo by registering of high frequency pressure fluctuations (HFPF). Tilting disc valves are thought of having higher cavitation potential than bileaflet valves due to higher closing velocities. However, the thromboembolic potential seems to be the same. Further studies are therefore needed to investigate the cavitation potential of bileaflet valves in vivo. The post processing of HFPF have shown difficulties when applied on bileaflet vavles due to asynchronous closure of the two leaflets. The aim of this study was therefore to isolate the pressure signature from each leaflet closure and perform cavitation analyses on each component. Six patients were included in the study (St. Jude Medical (n=3) and CarboMedics (n=3); all aortic bileaflet mechanical heart valves). HFPFs were recorded intraoperatively through a hydrophone at the aortic root. The pressure signature relating to the first and second leaflet closure was isolated and cavitation parameters were calculated (RMS after 50 kHz highpass filtering and signal energy). Data were averaged over 30 heart cycles. For all patients both the RMS value and signal energy of the second leaflet closure were higher than for the first leaflet closure. This indicates that the second leaflet closure is most prone to cause cavitation. Therefore, quantifying cavitation based on the HFPF related to the second leaflet closure may suggest that the cavitation potential for bileaflet valves in vivo may be higher than previous studies have suggested.

  8. Large Scale Magnetostrictive Valve Actuator

    NASA Technical Reports Server (NTRS)

    Richard, James A.; Holleman, Elizabeth; Eddleman, David

    2008-01-01

    Marshall Space Flight Center's Valves, Actuators and Ducts Design and Development Branch developed a large scale magnetostrictive valve actuator. The potential advantages of this technology are faster, more efficient valve actuators that consume less power and provide precise position control and deliver higher flow rates than conventional solenoid valves. Magnetostrictive materials change dimensions when a magnetic field is applied; this property is referred to as magnetostriction. Magnetostriction is caused by the alignment of the magnetic domains in the material s crystalline structure and the applied magnetic field lines. Typically, the material changes shape by elongating in the axial direction and constricting in the radial direction, resulting in no net change in volume. All hardware and testing is complete. This paper will discuss: the potential applications of the technology; overview of the as built actuator design; discuss problems that were uncovered during the development testing; review test data and evaluate weaknesses of the design; and discuss areas for improvement for future work. This actuator holds promises of a low power, high load, proportionally controlled actuator for valves requiring 440 to 1500 newtons load.

  9. Valve packings conquer fugitive emissions

    SciTech Connect

    1995-11-01

    In the early 1990s, when the US Environmental Protection Agency (EPA; Washington, D.C.) declared its intent to regulate fugitive emissions from valve-stem leakage, much of the chemical process industries (CPI) responded with fear and uncertainty. The biggest fear was that valve packing would not meet the required limits on leak rates and that expensive bellows seals may be required on many applications. The uncertainly was about how much it would cost. Today, for the most part, these concerns have been mitigated. It is estimated that about 80--90% of valves satisfy the emission requirements. The rest need some improvement in their packing systems to meet the regulations. Generally, these valves can be brought within compliance if the packing designers follow a few basic principles: Employ less-pliable outer rings and more-pliable inner rings; and don`t use excessive packing. While interest in valve packing remains high, mechanical seals continue to become more user-friendly. Many of those covered below are designed to run dry, and some can even tolerate high shaft-wobble without damage. Also look for improved flange gaskets and a host of seals to protect bearings. Twenty-one summaries are presented on new products and services.

  10. Titanium in Engine Valve Systems

    NASA Astrophysics Data System (ADS)

    Allison, J. E.; Sherman, A. M.; Bapna, M. R.

    1987-03-01

    Titanium alloys offer a unique combination of high strength-to-weight ratio, good corrosion resistance and favorable high temperature mechanical properties. Still, their relatively high cost has discouraged consideration for widespread use in automotive components. Recent demands for increased fuel economy have led to the consideration of these alloys for use as valve train materials where higher costs might be offset by improvements in performance and fuel economy. Lighter weight valve train components permit the use of lower spring loads, thus reducing friction and increasing fuel economy. Camshaft friction measurements made on a typical small displacement engine indicate that a twoto-four percent increase in fuel economy can be achieved. Valve train components are, however, subject to a severe operating environment, including elevated temperatures, sliding wear and high mechanical loads. This paper discusses the details of alloy and heat treatment selection for optimizing valve performance. When properly manufactured, titanium valves have been shown to withstand very stringent durability testing, indicating the technical feasibility of this approach to fuel economy improvement.

  11. Pulmonary Valve Replacement With a Trifecta Valve Is Associated With Reduced Transvalvular Gradient

    PubMed Central

    Gulack, Brian C.; Benrashid, Ehsan; Jaquiss, Robert D. B.; Lodge, Andrew J.

    2016-01-01

    Background Outcomes after surgical pulmonary valve replacement (PVR) in patients with congenital cardiac disease are limited by long-term valve deterioration, which may be hastened by turbulent flow. The use of the Trifecta valve (St. Jude Medical, Little Canada, MN) at our institution (Duke University Medical Center, Durham, NC) appears to result in low postimplantation transvalvular gradients. This study was performed to compare the early transvalvular gradient associated with the Trifecta valve with that associated with two other valves commonly used for PVR. Methods We performed a single institution review of patients undergoing PVR with the Perimount valve (Edwards Lifesciences, Irvine, CA), the Biocor valve (St. Jude Medical), or the Trifecta valve between November 1993 and January 2014. Multivariable linear regression modeling was used to determine the adjusted association between valve type and transvalvular gradient as determined by early postoperative echocardiography. Results A total of 186 patients met study criteria; 54 (29%) received a Biocor valve, 87 (47%) received a Perimount valve, and 45 (24%) received a Trifecta valve. There were no baseline differences among the groups, but the peak transvalvular gradient was significantly decreased among patients with the Trifecta valve. After adjustment for age, valve size, patients’ weight, and time to the assessment, as compared with the Trifecta valve, the Biocor valve was associated with a 57% higher peak valve gradient (p < 0.01), whereas the Perimount valve was associated with a 26% higher peak valve gradient (p = 0.04). Conclusions PVR for congenital heart disease with the Trifecta bioprosthetic valve is associated with a reduced early transvalvular gradient. This finding may be associated with reduced valve deterioration over time. PMID:27570156

  12. 5. DIABLO DAM: DETAIL VIEW OF RELIEF VALVES AT ELEVATION ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. DIABLO DAM: DETAIL VIEW OF RELIEF VALVES AT ELEVATION 1044. VALVE IN FOREGROUND IS A BUTTERFLY VALVE SIX FEET IN DIAMETER; VALVE TO THE REAR IS A JOHNSON-TYPE NEEDLE VALVE BOTH VALVES WERE MANUFACTURED BY THE PELTON WATER WHEEL COMPANY, 1989. - Skagit Power Development, Diablo Dam, On Skagit River, 6.9 miles upstream from Newhalem, Newhalem, Whatcom County, WA

  13. Coolant-Control Valves For Fluid-Sampling Probes

    NASA Technical Reports Server (NTRS)

    Schultz, Donald F.

    1989-01-01

    Small built-in leaks prevent overheating. Downstream flow-control globe valve replaced with modified gate valve. Modification consists of drilling small hole through valve gate, so valve never turned completely off. This "leaky" valve provides enough flow of coolant to prevent overheating causing probe to fail. Principle also applied to automatic control system by installing small bypass line around control valve.

  14. 46 CFR 56.20-15 - Valves employing resilient material.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... Category B, and shall be tested and used as follows: (1) Positive shutoff valves. The closed valve must... Category A or Category B valve. (2) Category A valves. The closed valve must pass less than the greater of...) from functioning as designed. (iii) Valves providing closure for any opening in the shell of the...

  15. Improved technique of transapical aortic valve implantation: "the Berlin addition".

    PubMed

    Pasic, Miralem; Dreysse, Stephan; Drews, Thorsten; Buz, Semih; Unbehaun, Axel; Kukucka, Marian; Mladenow, Alexandar; Hetzer, Roland

    2010-06-01

    Transapical aortic valve implantation carries some degree of uncertainty regarding the definitive valve position. We added angiographic visualization of the aortic root while the prosthetic valve is being slowly deployed. It enables easy correction of the position of the valve so that perfect alignment can be achieved of the relationships between the prosthetic valve, aortic valve annulus, aortic cusps, and the coronary arteries.

  16. How Is Heart Valve Disease Diagnosed?

    MedlinePlus

    ... page from the NHLBI on Twitter. How Is Heart Valve Disease Diagnosed? Your primary care doctor may detect a heart murmur or other signs of heart valve disease. However, a cardiologist usually will diagnose the condition. ...

  17. SLM Produced Hermetically Sealed Isolation Valve

    NASA Technical Reports Server (NTRS)

    Richard, James

    2014-01-01

    Marshall Space Flight Center (MSFC) has developed a valve concept to replace traditional pyrotechnic-driven isolation valves. This paper will describe the valve design and development process. The valve design uses a stem/wedge to support a disk inside the valve. That disk hermetically seals the pressurized fluids. A release mechanism holds the stem/wedge and a large spring in place. When required to open, a solenoid is energized and pulls the release mechanism allowing the spring to pull the stem/wedge away from the disk. Now the disk is unsupported and the pressure ruptures the disk allowing flow to the outlet of the valve. This paper will provide details of this design, describe the development testing, and show the results from the valve level tests performed. Also, a trade study is presented to show the advantages of this design to a conventional pyrotechnic-based valve.

  18. SLM Produced Hermetically Sealed Isolation Valve

    NASA Technical Reports Server (NTRS)

    Richard, James A.

    2014-01-01

    Marshall Space Flight Center (MSFC) has developed a valve concept to replace traditional pyrotechnic driven isolation valves. This paper will describe the valve design and development process. The valve design uses a stem/wedge to support a disk inside the valve. That disk hermetically seals the pressurized fluids. A release mechanism holds the stem/wedge and a large spring in place. When required to open, a solenoid is energized and pulls the release mechanism allowing the spring to pull the stem/wedge away from the disk. Now the disk is unsupported and the pressure ruptures the disk allowing flow to the outlet of the valve. This paper will provide details of this design, describe the development testing, and show the results from the valve level tests performed. Also, a trade study is presented to show the advantages of this design to a conventional pyrotechnic based valve.

  19. Abrasion and resistant discharge valve developed

    NASA Technical Reports Server (NTRS)

    Gottwald, W. L.

    1969-01-01

    Discharge valve capable of withstanding intense radiation and high abrasion was developed for use in a fluidized bed reactor. The valve which employs a replaceable Teflon seal, has only one moving part and is designed for remote assembly and disassembly.

  20. Design criteria monograph for valve assemblies

    NASA Technical Reports Server (NTRS)

    1974-01-01

    Monograph is limited to valve selection factors for trade-off studies, configuration analyses, actuator selection, and integration of components. Material is organized along lines of valve design sequence.

  1. Geometry of aortic heart valves. [prosthetic design

    NASA Technical Reports Server (NTRS)

    Karara, H. M.

    1975-01-01

    Photogrammetric measurements of the surface topography of the aortic valves obtained from silicon rubber molds of freshly excised human aortic valves are presented. The data are part of an investigation into the design of a new prosthetic valve which will be a central-flow device, like the real valve and unlike previous central-occluding prostheses. Since the maximum stress on the heart valve is induced when the valve is closed and subject to diastolic back-pressure, it was decided to determine the valve geometry during diastole. That is, the molds were formed by pouring the rubber down the excised aortas, causing the valves to close. The molds were made under different pressures (20-120 torr); photogrammetry served as a vehicle for the assessment of the mold topography through the following outputs: digital models, surface profiles, and contour maps.

  2. 21 CFR 868.5870 - Nonrebreathing valve.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ...) Identification. A nonrebreathing valve is a one-way valve that directs breathing gas flow to the patient and vents exhaled gases into the atmosphere. (b) Classification. Class II (performance standards)....

  3. Intro to Valve Guide Reconditioning. Automotive Mechanics. Valves. Instructor's Guide [and] Student Guide.

    ERIC Educational Resources Information Center

    Horner, W.

    This instructional package, one in a series of individualized instructional units on tools and techniques for repairing worn valve guides in motor vehicles, provides practical experience for students in working on cylinder heads. Covered in the module are reaming valve guides that are oversized to match a new oversized valve, reaming valve guides…

  4. Aortic valve replacement with the Nicks annulus enlargement procedure 12 years after mitral valve replacement.

    PubMed

    Kazama, S; Kurata, A; Yamashita, Y

    1999-10-01

    An aortic valve replacement was successfully performed employing the Nicks annulus enlargement procedure in a case of aortic valve stenosis with small annulus 12 years after mitral valve replacement. Previous mitral valve replacement does not preclude feasibility of the Nicks procedure.

  5. Propellant isolation shutoff valve program

    NASA Technical Reports Server (NTRS)

    Merritt, F. L.

    1973-01-01

    An analysis and design effort directed to advancing the state-of-the-art of space storable isolation valves for control of flow of the propellants liquid fluorine/hydrazine and Flox/monomethylhydrazine is discussed. Emphasis is on achieving zero liquid leakage and capability of withstanding missions up to 10 years in interplanetary space. Included is a study of all-metal poppet sealing theory, an evaluation of candidate seal configurations, a valve actuator trade-off study and design description of a pneumo-thermally actuated soft metal poppet seal valve. The concepts and analysis leading to the soft seal approach are documented. A theoretical evaluation of seal leakage versus seal loading, related finishes and yield strengths of various materials is provided. Application of a confined soft aluminum seal loaded to 2 to 3 times yield strength is recommended. Use of either an electro-mechanical or pneumatic actuator appears to be feasible for the application.

  6. Bistable diverter valve in microfluidics

    NASA Astrophysics Data System (ADS)

    Tesař, V.; Bandalusena, H. C. H.

    2011-05-01

    Bistable diverter valves are useful for a large number of no-moving-part flow control applications, and there is a considerable interest in using them also in microfluidics, especially for handling small pressure-driven flows. However, with decreasing Reynolds number, the Coanda effect—on which the flow diverting effect depends—becomes less effective. Authors performed a study, involving flow visualisation, PIV experiments, measurements of the flow rates, and numerical flowfield computations, aimed at clarifying behaviour of a typical fluidic valve at low Reynolds numbers. A typical fluidic valve originally developed for high Re operation was demonstrated to be useful, though with progressively limited efficiency, down to surprisingly low Re values as small as Re = 800. Also observed was a previously not reported discontinuation in the otherwise monotonic decrease in performance at Re between 1,500 and 2,000.

  7. Novel Active Combustion Control Valve

    NASA Technical Reports Server (NTRS)

    Caspermeyer, Matt

    2014-01-01

    This project presents an innovative solution for active combustion control. Relative to the state of the art, this concept provides frequency modulation (greater than 1,000 Hz) in combination with high-amplitude modulation (in excess of 30 percent flow) and can be adapted to a large range of fuel injector sizes. Existing valves often have low flow modulation strength. To achieve higher flow modulation requires excessively large valves or too much electrical power to be practical. This active combustion control valve (ACCV) has high-frequency and -amplitude modulation, consumes low electrical power, is closely coupled with the fuel injector for modulation strength, and is practical in size and weight. By mitigating combustion instabilities at higher frequencies than have been previously achieved (approximately 1,000 Hz), this new technology enables gas turbines to run at operating points that produce lower emissions and higher performance.

  8. Non-collinear valve actuator

    NASA Technical Reports Server (NTRS)

    Richard, James A. (Inventor)

    2012-01-01

    A non-collinear valve actuator includes a primary actuating system and a return spring system with each applying forces to a linkage system in order to regulate the flow of a quarter-turn valve. The primary actuating system and return spring system are positioned non-collinearly, which simply means the primary actuating system and return spring system are not in line with each other. By positioning the primary actuating system and return spring system in this manner, the primary actuating system can undergo a larger stroke while the return spring system experiences significantly less displacement. This allows the length of the return spring to be reduced due to the minimization of displacement thereby reducing the weight of the return spring system. By allowing the primary actuating system to undergo longer strokes, the weight of the primary actuating system may also be reduced. Accordingly, the weight of the non-collinear valve actuator is reduced.

  9. Active combustion flow modulation valve

    DOEpatents

    Hensel, John Peter; Black, Nathaniel; Thorton, Jimmy Dean; Vipperman, Jeffrey Stuart; Lambeth, David N; Clark, William W

    2013-09-24

    A flow modulation valve has a slidably translating hollow armature with at least one energizable coil wound around and fixably attached to the hollow armature. The energizable coil or coils are influenced by at least one permanent magnet surrounding the hollow armature and supported by an outer casing. Lorentz forces on the energizable coils which are translated to the hollow armature, increase or decrease the flow area to provide flow throttling action. The extent of hollow armature translation depends on the value of current supplied and the direction of translation depends on the direction of current flow. The compact nature of the flow modulation valve combined with the high forces afforded by the actuator design provide a flow modulation valve which is highly responsive to high-rate input control signals.

  10. Minimally Invasive Versus Conventional Aortic Valve Replacement

    PubMed Central

    Attia, Rizwan Q.; Hickey, Graeme L.; Grant, Stuart W.; Bridgewater, Ben; Roxburgh, James C.; Kumar, Pankaj; Ridley, Paul; Bhabra, Moninder; Millner, Russell W. J.; Athanasiou, Thanos; Casula, Roberto; Chukwuemka, Andrew; Pillay, Thasee; Young, Christopher P.

    2016-01-01

    Objective Minimally invasive aortic valve replacement (MIAVR) has been demonstrated as a safe and effective option but remains underused. We aimed to evaluate outcomes of isolated MIAVR compared with conventional aortic valve replacement (CAVR). Methods Data from The National Institute for Cardiovascular Outcomes Research (NICOR) were analyzed at seven volunteer centers (2006–2012). Primary outcomes were in-hospital mortality and midterm survival. Secondary outcomes were postoperative length of stay as well as cumulative bypass and cross-clamp times. Propensity modeling with matched cohort analysis was used. Results Of 307 consecutive MIAVR patients, 151 (49%) were performed during the last 2 years of study with a continued increase in numbers. The 307 MIAVR patients were matched on a 1:1 ratio. In the matched CAVR group, there was no statistically significant difference in in-hospital mortality [MIAVR, 4/307,(1.3%); 95% confidence interval (CI), 0.4%–3.4% vs CAVR, 6/307 (2.0%); 95% CI, 0.8%–4.3%; P = 0.752]. One-year survival rates in the MIAVR and CAVR groups were 94.4% and 94.6%, respectively. There was no statistically significant difference in midterm survival (P = 0.677; hazard ratio, 0.90; 95% CI, 0.56–1.46). Median postoperative length of stay was lower in the MIAVR patients by 1 day (P = 0.009). The mean cumulative bypass time (94.8 vs 91.3 minutes; P = 0.333) and cross-clamp time (74.6 vs 68.4 minutes; P = 0.006) were longer in the MIAVR group; however, this was significant only in the cross-clamp time comparison. Conclusions Minimally invasive aortic valve replacement is a safe alternative to CAVR with respect to operative and 1-year mortality and is associated with a shorter postoperative stay. Further studies are required in high-risk (logistic EuroSCORE > 10) patients to define the role of MIAVR. PMID:26926521

  11. Synthesis and pharmacological properties of benzothiazole, 1,3-4-oxadiazole and 1,3,4-thiadiazole derivatives.

    PubMed

    Santagati, M; Modica, M; Santagati, A; Russo, F; Caruso, A; Cutuli, V; Di Pietro, E; Amico-Roxas, M

    1994-12-01

    The reaction of the 2-amino-substituted 1,3,4-oxadiazoles 9, 10 and the benzothiazoles 11, 12 with ethyl cyanoacetate is described. The obtained cyanoacetamide derivatives 13-16 gave the benzylidene derivatives 18-21 by condensation with benzaldehyde. 2-Phenyl-5-amino-1,3,4-oxadiazolo[3,2-a]pyrimidin-7-one (17) was also obtained. Moreover, the preparation of 6,7,8,9-tetraydro-5H-1,3,4-thiadiazolo[2,3-b]quinazolin++ +-5-thio-derivatives 22-25 and N-(1,3,4-thiadiazol-2-yl-5-substituted)-3,4-5,6-tetrahydro-anthran ilic acids 26-29 is also described. All above compounds and compounds, related to them, 1-8 were tested for their analgesic and antiinflammatory activities and the pharmacological screening results are reported and discussed.

  12. Ambulatory percutaneous lung biopsy with early discharge and Heimlich valve management of iatrogenic pneumothorax: more for less.

    PubMed

    Tavare, A N; Creer, D D; Khan, S; Vancheeswaran, R; Hare, S S

    2016-02-01

    A prospective study of 489 consecutive outpatient image-guided percutaneous lung biopsies was conducted to determine whether early discharge, incorporating ambulatory Heimlich valve drain, is potentially advantageous to the National Health Service. Patients were discharged at 30 or 60 min, with significant pneumothoraces treated using Heimlich valve. 485 (99.2%) patients were successfully discharged early, 402 at 30 min. 87 (17.8%) patients developed pneumothorax: 52 required Heimlich valve; 5 proceeded to biopsy with Heimlich valve in situ. All drains were removed within 48 h, 38/52 (73.1%) at 24 h. Our results provide evidence for a paradigm shift in UK practice: early discharge lung biopsy, facilitated by ambulatory Heimlich valve, is safe with significant clinical and economic benefits.

  13. Towards Performance Prognostics of a Launch Valve

    DTIC Science & Technology

    2014-10-02

    works are related to this paper’s efforts. Gomes et. al. developed a health monitoring system for a pneumatic valve using a Probability Integral...Transform based technique (Gomes 2010) and Daigle et. al. developed a model-based prognostics approach for pneumatic valves (Daigle 2011). While the...Launch Valve in this work is hydraulically controlled, the methods used for pneumatic valve PHM are quite relevant. Diagle et. al. used a Probability

  14. AM2 3-4 Alternate Lay Pattern Evaluation

    DTIC Science & Technology

    2014-09-01

    ER D C/ G SL T R- 14 -3 8 Airfield Damage Repair Modernization Program AM2 3-4 Alternate Lay Pattern Evaluation G eo te ch ni ca l a nd...Airfield Damage Repair Modernization Program ERDC/GSL TR-14-38 September 2014 AM2 3-4 Alternate Lay Pattern Evaluation Timothy W. Rushing, Lyan...brickwork pattern. Therefore, the 3-4 alternate lay pattern was designed to allow Marines to use any mats on hand to fill in designated portions of the

  15. Bis (4-(3,4-dimethylene-pyrrolidyl)-phenyl) methane

    NASA Technical Reports Server (NTRS)

    Ottenbrite, Raphael M. (Inventor)

    1990-01-01

    The primary objective is to prepare high temperature polymeric materials, especially linear aromatic polyimides, which maintain their integrity and toughness during long exposure times at elevated temperatures. The attained benefits are obtained by first providing the bis (exocyclodiene) bis (4-(3,4-dimethylene-pyrrolidyl)-phenyl) methane, which is a novel material formed from the monomer N-phenyl-3,4-dimethylene-pyrrolidine. This compound undergoes Diels-Alder reaction with a bismaleimide, without the evolution of gaseous by-products, to form the aromatic polyimide bis (4-(3,4-dimethylene-pyrrolidyl)-phenyl) methane.

  16. TWO-WAY FREEZE VALVE

    DOEpatents

    Lantz, K.D.; Clark, P.M.

    1960-01-01

    A valve for closing off the flow of radioactive and corrosive gases and liquids or mixtures thereof and forming a leak tight barrier is described. This valve has no mechanical moving parts which would require design to close tolerances and retention of the usual seal tighthess. Instead, there is provided a cavity in which a fusible metal is contained. Heating and cooling are provided to exercise control over the state of the metal. Baffle chambers are utilized to separate the molten fusible metal from the gas or liquid which is being passed through and return the molten metal to its cavity.

  17. Fast-acting valve actuator

    DOEpatents

    Cho, Nakwon

    1980-01-01

    A fast-acting valve actuator utilizes a spring driven pneumatically loaded piston to drive a valve gate. Rapid exhaust of pressurized gas from the pneumatically loaded side of the piston facilitates an extremely rapid piston stroke. A flexible selector diaphragm opens and closes an exhaust port in response to pressure differentials created by energizing and de-energizing a solenoid which controls the pneumatic input to the actuator as well as selectively providing a venting action to one side of the selector diaphragm.

  18. Surface spin-valve effect.

    PubMed

    Yanson, I K; Naidyuk, Yu G; Fisun, V V; Konovalenko, A; Balkashin, O P; Triputen, L Yu; Korenivski, V

    2007-04-01

    We report an observation of spin-valve-like hysteresis within a few atomic layers at a ferromagnetic interface. We use phonon spectroscopy of nanometer-sized point contacts as an in situ probe to study the mechanism of the effect. Distinctive energy phonon peaks for contacts with dissimilar nonmagnetic outer electrodes allow localizing the observed spin switching to the top or bottom interfaces for nanometer thin ferromagnetic layers. The mechanism consistent with our data is energetically distinct atomically thin surface spin layers that can form current- or field-driven surface spin-valves within a single ferromagnetic film.

  19. Aerodynamic Characteristics of Tracheostomy Speaking Valves.

    ERIC Educational Resources Information Center

    Fornataro-Clerici, Lisa; Zajac, David J.

    1993-01-01

    Pressure-flow characteristics were determined for four different one-way valves (Kisner, Montgomery, Olympic, and Passy-Muir) used for speech production in tracheotomy patients. Results indicated significant differences in resistance among the valves, with the resistance of one valve substantially greater than that of the normal upper airways.…

  20. 49 CFR 229.109 - Safety valves.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 4 2012-10-01 2012-10-01 false Safety valves. 229.109 Section 229.109..., DEPARTMENT OF TRANSPORTATION RAILROAD LOCOMOTIVE SAFETY STANDARDS Safety Requirements Steam Generators § 229.109 Safety valves. Every steam generator shall be equipped with at least two safety valves that have...

  1. 49 CFR 229.109 - Safety valves.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 4 2011-10-01 2011-10-01 false Safety valves. 229.109 Section 229.109..., DEPARTMENT OF TRANSPORTATION RAILROAD LOCOMOTIVE SAFETY STANDARDS Safety Requirements Steam Generators § 229.109 Safety valves. Every steam generator shall be equipped with at least two safety valves that have...

  2. Minimally Invasive Mitral Valve Surgery II

    PubMed Central

    Wolfe, J. Alan; Malaisrie, S. Chris; Farivar, R. Saeid; Khan, Junaid H.; Hargrove, W. Clark; Moront, Michael G.; Ryan, William H.; Ailawadi, Gorav; Agnihotri, Arvind K.; Hummel, Brian W.; Fayers, Trevor M.; Grossi, Eugene A.; Guy, T. Sloane; Lehr, Eric J.; Mehall, John R.; Murphy, Douglas A.; Rodriguez, Evelio; Salemi, Arash; Segurola, Romualdo J.; Shemin, Richard J.; Smith, J. Michael; Smith, Robert L.; Weldner, Paul W.; Lewis, Clifton T. P.; Barnhart, Glenn R.; Goldman, Scott M.

    2016-01-01

    Abstract Techniques for minimally invasive mitral valve repair and replacement continue to evolve. This expert opinion, the second of a 3-part series, outlines current best practices for nonrobotic, minimally invasive mitral valve procedures, and for postoperative care after minimally invasive mitral valve surgery. PMID:27654406

  3. Pentacuspid aortic valve diagnosed by transoesophageal echocardiography

    PubMed Central

    Cemri, M; Cengel, A; Timurkaynak, T

    2000-01-01

    Congenital aortic valve anomalies are quite a rare finding in echocardiographic examinations. A case of a 19 year old man with a pentacuspid aortic valve without aortic stenosis and regurgitation, detected by transoesophageal echocardiography, is presented.


Keywords: pentacuspid aortic valve; echocardiography PMID:10995427

  4. Staphylococcus saprophyticus causing native valve endocarditis.

    PubMed

    Garduño, Eugenio; Márquez, Irene; Beteta, Alicia; Said, Ibrahim; Blanco, Javier; Pineda, Tomás

    2005-01-01

    Coagulase negative staphylococci are a rare cause of native valve endocarditis. Staphylococcus saprophyticus is a coagulase-negative Staphylococcus infrequently reported as a human pathogen, and most of the cases reported are urinary tract infections. We describe a case of native valve endocarditis attributed to this organism. The patient needed valve replacement due to heart failure.

  5. Echocardiographic assessment of prosthetic heart valves.

    PubMed

    Blauwet, Lori A; Miller, Fletcher A

    2014-01-01

    Valvular heart disease is a global health problem. It is estimated that more than 280,000 prosthetic heart valves are implanted worldwide each year. As the world's population is aging, the incidence of prosthetic heart valve implantation and the prevalence of prosthetic heart valves continue to increase. Assessing heart valve prosthesis function remains challenging, as prosthesis malfunction is unpredictable but not uncommon. Transthoracic two-dimensional and Doppler echocardiography is the preferred method for assessing prosthetic valve function. Clinically useful Doppler-derived measures for assessing prosthetic valve hemodynamic profiles have been reported for aortic, mitral, and tricuspid valve prostheses, but echocardiographic data regarding pulmonary valve prostheses remain limited. Complete prosthetic valve evaluation by transthoracic echocardiography (TTE) is sometimes challenging due to acoustic shadowing and artifacts. In these cases, further imaging with transesophageal echocardiography, fluoroscopy and/or gated CT may be warranted, particularly if prosthetic valve dysfunction is suspected. Being able to differentiate pathologic versus functional obstruction of an individual prosthesis is extremely important, as this distinction affects management decisions. Transprosthetic and periprosthetic regurgitation may be difficult to visualize on TTE, so careful review of Doppler-derived data combined with a high index of suspicion is warranted, particularly in symptomatic patients. A baseline TTE soon after valve implantation is indicated in order to "fingerprint" the prosthesis hemodynamic profile. It remains unclear how frequently serial imaging should be performed in order to assess prosthetic valve function, as this issue has not been systematically studied.

  6. Aspirator increases relief valve poppet stroke

    NASA Technical Reports Server (NTRS)

    Biddle, M. E.

    1967-01-01

    Addition of an aspirator to a relief valve increases the valve poppet stroke under dynamic flow conditions. The aspirator allows poppet inlet dynamic forces to overcome relief valve spring force. It reduces the fluid pressure in the skirt cavity by providing a low pressure sense probe.

  7. Design criteria monograph for valve components

    NASA Technical Reports Server (NTRS)

    1974-01-01

    Monograph treats valve design technology problems as they were solved in successful development of flightweight operational valves for liquid rocket systems. General practices for cleaning and contamination prevention are summarized. Balance of information is arranged by topic, since detail design requirements apply to most types of valves.

  8. 14 CFR 125.133 - Fuel valves.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 3 2011-01-01 2011-01-01 false Fuel valves. 125.133 Section 125.133 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIR CARRIERS....133 Fuel valves. Each fuel valve must— (a) Comply with § 125.155; (b) Have positive stops or...

  9. 14 CFR 25.995 - Fuel valves.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Fuel valves. 25.995 Section 25.995... STANDARDS: TRANSPORT CATEGORY AIRPLANES Powerplant Fuel System Components § 25.995 Fuel valves. In addition to the requirements of § 25.1189 for shutoff means, each fuel valve must— (a) (b) Be supported...

  10. 14 CFR 25.995 - Fuel valves.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Fuel valves. 25.995 Section 25.995... STANDARDS: TRANSPORT CATEGORY AIRPLANES Powerplant Fuel System Components § 25.995 Fuel valves. In addition to the requirements of § 25.1189 for shutoff means, each fuel valve must— (a) (b) Be supported...

  11. 14 CFR 125.133 - Fuel valves.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 3 2014-01-01 2014-01-01 false Fuel valves. 125.133 Section 125.133 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIR CARRIERS....133 Fuel valves. Each fuel valve must— (a) Comply with § 125.155; (b) Have positive stops or...

  12. 14 CFR 25.995 - Fuel valves.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Fuel valves. 25.995 Section 25.995... STANDARDS: TRANSPORT CATEGORY AIRPLANES Powerplant Fuel System Components § 25.995 Fuel valves. In addition to the requirements of § 25.1189 for shutoff means, each fuel valve must— (a) (b) Be supported...

  13. 14 CFR 125.133 - Fuel valves.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 3 2012-01-01 2012-01-01 false Fuel valves. 125.133 Section 125.133 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIR CARRIERS....133 Fuel valves. Each fuel valve must— (a) Comply with § 125.155; (b) Have positive stops or...

  14. 14 CFR 27.995 - Fuel valves.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Fuel valves. 27.995 Section 27.995... STANDARDS: NORMAL CATEGORY ROTORCRAFT Powerplant Fuel System Components § 27.995 Fuel valves. (a) There must be a positive, quick-acting valve to shut off fuel to each engine individually. (b) The control...

  15. 14 CFR 27.995 - Fuel valves.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Fuel valves. 27.995 Section 27.995... STANDARDS: NORMAL CATEGORY ROTORCRAFT Powerplant Fuel System Components § 27.995 Fuel valves. (a) There must be a positive, quick-acting valve to shut off fuel to each engine individually. (b) The control...

  16. 14 CFR 29.995 - Fuel valves.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Fuel valves. 29.995 Section 29.995... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Powerplant Fuel System Components § 29.995 Fuel valves. In addition to meeting the requirements of § 29.1189, each fuel valve must— (a) (b) Be supported so that no...

  17. 14 CFR 27.995 - Fuel valves.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Fuel valves. 27.995 Section 27.995... STANDARDS: NORMAL CATEGORY ROTORCRAFT Powerplant Fuel System Components § 27.995 Fuel valves. (a) There must be a positive, quick-acting valve to shut off fuel to each engine individually. (b) The control...

  18. 14 CFR 29.995 - Fuel valves.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Fuel valves. 29.995 Section 29.995... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Powerplant Fuel System Components § 29.995 Fuel valves. In addition to meeting the requirements of § 29.1189, each fuel valve must— (a) (b) Be supported so that no...

  19. 14 CFR 25.995 - Fuel valves.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Fuel valves. 25.995 Section 25.995... STANDARDS: TRANSPORT CATEGORY AIRPLANES Powerplant Fuel System Components § 25.995 Fuel valves. In addition to the requirements of § 25.1189 for shutoff means, each fuel valve must— (a) (b) Be supported...

  20. 14 CFR 125.133 - Fuel valves.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 3 2013-01-01 2013-01-01 false Fuel valves. 125.133 Section 125.133 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIR CARRIERS....133 Fuel valves. Each fuel valve must— (a) Comply with § 125.155; (b) Have positive stops or...

  1. 14 CFR 29.995 - Fuel valves.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Fuel valves. 29.995 Section 29.995... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Powerplant Fuel System Components § 29.995 Fuel valves. In addition to meeting the requirements of § 29.1189, each fuel valve must— (a) (b) Be supported so that no...

  2. 14 CFR 27.995 - Fuel valves.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Fuel valves. 27.995 Section 27.995... STANDARDS: NORMAL CATEGORY ROTORCRAFT Powerplant Fuel System Components § 27.995 Fuel valves. (a) There must be a positive, quick-acting valve to shut off fuel to each engine individually. (b) The control...

  3. 14 CFR 29.995 - Fuel valves.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Fuel valves. 29.995 Section 29.995... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Powerplant Fuel System Components § 29.995 Fuel valves. In addition to meeting the requirements of § 29.1189, each fuel valve must— (a) (b) Be supported so that no...

  4. 14 CFR 29.995 - Fuel valves.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Fuel valves. 29.995 Section 29.995... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Powerplant Fuel System Components § 29.995 Fuel valves. In addition to meeting the requirements of § 29.1189, each fuel valve must— (a) (b) Be supported so that no...

  5. 14 CFR 25.995 - Fuel valves.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Fuel valves. 25.995 Section 25.995... STANDARDS: TRANSPORT CATEGORY AIRPLANES Powerplant Fuel System Components § 25.995 Fuel valves. In addition to the requirements of § 25.1189 for shutoff means, each fuel valve must— (a) (b) Be supported...

  6. 14 CFR 27.995 - Fuel valves.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Fuel valves. 27.995 Section 27.995... STANDARDS: NORMAL CATEGORY ROTORCRAFT Powerplant Fuel System Components § 27.995 Fuel valves. (a) There must be a positive, quick-acting valve to shut off fuel to each engine individually. (b) The control...

  7. 14 CFR 125.133 - Fuel valves.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Fuel valves. 125.133 Section 125.133 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIR CARRIERS....133 Fuel valves. Each fuel valve must— (a) Comply with § 125.155; (b) Have positive stops or...

  8. 49 CFR 192.145 - Valves.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ...) Except for cast iron and plastic valves, each valve must meet the minimum requirements of API 6D...-temperature ratings contained in those requirements. (b) Each cast iron and plastic valve must comply with the..., cover, and/or end flange) components made of cast iron, malleable iron, or ductile iron may be used...

  9. 49 CFR 192.145 - Valves.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ...) Except for cast iron and plastic valves, each valve must meet the minimum requirements of API 6D...-temperature ratings contained in those requirements. (b) Each cast iron and plastic valve must comply with the..., cover, and/or end flange) components made of cast iron, malleable iron, or ductile iron may be used...

  10. Valve for fuel pin loading system

    DOEpatents

    Christiansen, David W.

    1985-01-01

    A cyclone valve surrounds a wall opening through which cladding is projected. An axial valve inlet surrounds the cladding. Air is drawn through the inlet by a cyclone stream within the valve. An inflatable seal is included to physically engage a fuel pin subassembly during loading of fuel pellets.

  11. Valve for fuel pin loading system

    DOEpatents

    Christiansen, D.W.

    1984-01-01

    A cyclone valve surrounds a wall opening through which cladding is projected. An axial valve inlet surrounds the cladding. Air is drawn through the inlet by a cyclone stream within the valve. An inflatable seal is included to physically engage a fuel pin subassembly during loading of fuel pellets.

  12. AUTOMOTIVE DIESEL MAINTENANCE 2. UNIT XXIII, MICHIGAN/CLARK TRANSMISSION--HYDRAULIC SHIFT.

    ERIC Educational Resources Information Center

    Minnesota State Dept. of Education, St. Paul. Div. of Vocational and Technical Education.

    THIS MODULE OF A 25-MODULE COURSE IS DESIGNED TO DEVELOP AN UNDERSTANDING OF THE SHIFTING AND CONTROL FUNCTIONS OF A SPECIFIC TRANSMISSION USED ON DIESEL POWERED EQUIPMENT. TOPICS ARE MECHANICAL AND HYDRAULIC SHIFTING, AND OIL FLOW THROUGH THE CONTROL VALVE. THE MODULE CONSISTS OF A SELF-INSTRUCTIONAL PROGRAMED TRAINING FILM "MICHIGAN/CLARK…

  13. Mitral valve repair versus replacement in simultaneous aortic and mitral valve surgery

    PubMed Central

    Urban, Marian; Pirk, Jan; Szarszoi, Ondrej; Skalsky, Ivo; Maly, Jiri; Netuka, Ivan

    2013-01-01

    BACKGROUND: Double valve replacement for concomitant aortic and mitral valve disease is associated with substantial morbidity and mortality. Excellent results with valve repair in isolated mitral valve lesions have been reported; therefore, whether its potential benefits would translate into better outcomes in patients with combined mitral-aortic disease was investigated. METHODS: A retrospective observational study was performed involving 341 patients who underwent aortic valve replacement with either mitral valve repair (n=42) or double valve replacement (n=299). Data were analyzed for early mortality, late valve-related complications and survival. RESULTS: The early mortality rate was 11.9% for valve repair and 11.0% for replacement (P=0.797). Survival (± SD) was 67±11% in mitral valve repair with aortic valve replacement and 81±3% in double valve replacement at five years of follow-up (P=0.187). The percentage of patients who did not experience major adverse valve-related events at five years of follow-up was 83±9% in those who underwent mitral valve repair with aortic valve replacement and 89±2% in patients who underwent double valve replacement (P=0.412). Age >70 years (HR 2.4 [95% CI 1.1 to 4.9]; P=0.023) and renal dysfunction (HR 1.9 [95% CI 1.2 to 3.7]; P=0.01) were independent predictors of decreased survival. CONCLUSIONS: In patients with double valve disease, both mitral valve repair and replacement provided comparable early outcomes. There were no significant differences in valve-related reoperations, anticoagulation-related complications or prosthetic valve endocarditis. Patient-related factors appear to be the major determinant of late survival, irrespective of the type of operation. PMID:24294032

  14. Aortic valve insufficiency in the teenager and young adult: the role of prosthetic valve replacement.

    PubMed

    Bradley, Scott M

    2013-10-01

    The contents of this article were presented in the session "Aortic insufficiency in the teenager" at the congenital parallel symposium of the 2013 Society of Thoracic Surgeons (STS) annual meeting. The accompanying articles detail the approaches of aortic valve repair and the Ross procedure.(1,2) The current article focuses on prosthetic valve replacement. For many young patients requiring aortic valve surgery, either aortic valve repair or a Ross procedure provides a good option. The advantages include avoidance of anticoagulation and potential for growth. In other patients, a prosthetic valve is an appropriate alternative. This article discusses the current state of knowledge regarding mechanical and bioprosthetic valve prostheses and their specific advantages relative to valve repair or a Ross procedure. In current practice, young patients requiring aortic valve surgery frequently undergo valve replacement with a prosthetic valve. In STS adult cardiac database, among patients ≤30 years of age undergoing aortic valve surgery, 34% had placement of a mechanical valve, 51% had placement of a bioprosthetic valve, 9% had aortic valve repair, and 2% had a Ross procedure. In the STS congenital database, among patients 12 to 30 years of age undergoing aortic valve surgery, 21% had placement of a mechanical valve, 18% had placement of a bioprosthetic valve, 30% had aortic valve repair, and 24% had a Ross procedure. In the future, the balance among these options may be altered by design improvements in prosthetic valves, alternatives to warfarin, the development of new patch materials for valve repair, and techniques to avoid Ross autograft failure.

  15. 17. BUILDING I, BAYS 3, 4 AND 5, VIEW NORTHWEST, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    17. BUILDING I, BAYS 3, 4 AND 5, VIEW NORTHWEST, SOUTHEAST ELEVATION - Public Service Railway Company, Newton Avenue Car Shops, Bounded by Tenth, Mount Ephraim, Border & Newton Avenue, Camden, Camden County, NJ

  16. Kv3.4 channel function and dysfunction in nociceptors

    PubMed Central

    Ritter, David M; Zemel, Benjamin M; Lepore, Angelo C; Covarrubias, Manuel

    2015-01-01

    Recently, we reported the isolation of the Kv3.4 current in dorsal root ganglion (DRG) neurons and described dysregulation of this current in a spinal cord injury (SCI) model of chronic pain. These studies strongly suggest that rat Kv3.4 channels are major regulators of excitability in DRG neurons from pups and adult females, where they help determine action potential (AP) repolarization and spiking properties. Here, we characterized the Kv3.4 current in rat DRG neurons from adult males and show that it transfers 40–70% of the total repolarizing charge during the AP across all ages and sexes. Following SCI, we also found remodeling of the repolarizing currents during the AP. In the light of these studies, homomeric Kv3.4 channels expressed in DRG nociceptors are emerging novel targets that may help develop new approaches to treat neuropathic pain. PMID:26039360

  17. Kv3.4 channel function and dysfunction in nociceptors.

    PubMed

    Ritter, David M; Zemel, Benjamin M; Lepore, Angelo C; Covarrubias, Manuel

    2015-01-01

    Recently, we reported the isolation of the Kv3.4 current in dorsal root ganglion (DRG) neurons and described dysregulation of this current in a spinal cord injury (SCI) model of chronic pain. These studies strongly suggest that rat Kv3.4 channels are major regulators of excitability in DRG neurons from pups and adult females, where they help determine action potential (AP) repolarization and spiking properties. Here, we characterized the Kv3.4 current in rat DRG neurons from adult males and show that it transfers 40-70% of the total repolarizing charge during the AP across all ages and sexes. Following SCI, we also found remodeling of the repolarizing currents during the AP. In the light of these studies, homomeric Kv3.4 channels expressed in DRG nociceptors are emerging novel targets that may help develop new approaches to treat neuropathic pain.

  18. 1. 3/4 VIEW, LOOKING NE. Philadelphia & Reading Railroad, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. 3/4 VIEW, LOOKING NE. - Philadelphia & Reading Railroad, Pedestrian Suspension Bridge, Foot of Sixth Street at Schuylkill River (formerly spanned Philadelphia & Reading main line at Reading Depot), Reading, Berks County, PA

  19. 34. DETAILS OF CAISSON FOR PIERS 2, 3, 4 AND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    34. DETAILS OF CAISSON FOR PIERS 2, 3, 4 AND 5 TO BE BUILT ON SOIL OVERBURDEN - East Bloomsburg Bridge, Spanning Susquehanna River at Pennsylvania Route 487 (Legislative Route 283), Bloomsburg, Columbia County, PA

  20. 1,3,4-oxadiazole: a biologically active scaffold.

    PubMed

    Khalilullah, H; Ahsan, M J; Hedaitullah, Md; Khan, S; Ahmed, B

    2012-07-01

    There has been considerable interest in the development of novel compounds with anticonvulsant, antidepressant, analgesic, anti-inflammatory, antiallergic, antipsychotic, antimicrobial, antimycobecterial, antitumour, antiviral and antitubercular activities. 1,3,4-oxadiazoles constitute an important class of compounds for new drug development. Therefore, many researchers have synthesized these compounds as target structures and evaluated their biological activities. These observations led to the development of new 1,3,4-oxadiazole derivatives. This review article describes the various biological activities associated with 1,3,4-oxadiazole ring system and is useful in guiding the researchers across the world working on this moiety and consequently have been instrumental in the advancement of 1,3,4-oxadiazole chemistry.

  1. Valve timing adjusting mechanism for internal combustion engine for adjusting timing of intake valve and/or exhaust valve corresponding to engine operating conditions

    SciTech Connect

    Akassaka, A.; Suga, S.; Sawada, T.

    1989-03-14

    A valve timing adjusting mechanism for an internal combustion engine is described, comprising: a camshaft carrying a cam for driving one of an intake valve and an exhaust valve, the camshaft having a section formed with first helical gear teeth; a cam pulley engaging a timing belt driven by the engine for rotation in synchronism with engine revolution, the cam pulley having second helical gear teeth; a ring gear having inner and outer helical gear teeth engageable with the first and second gear teeth of the camshaft and the cam pulley; first means for defining an enclosed chamber facing one planar face of the ring gear and connected with a fluid pressure source to receive pressurized fluid therefrom; a spring means associated with the other planar face of the ring gear for exerting an initial biasing force on the ring gear in opposition to the force due to the pressure on the ring gear from the enclosed chamber; and second means for controlling the fluid pressure introduced into the enclosed chamber in accordance with engine operating conditions so as to shift the ring gear between two positions.

  2. Aortic valve stenosis after previous coronary bypass: Transcatheter valve implantation or aortic valve replacement?

    PubMed Central

    2012-01-01

    We report a prospective comparison between transcatheter valve implantation (TAVI, n = 13) and surgical aortic valve replacement (AVR, n = 10) in patients with severe aortic valve stenosis and previous coronary bypass surgery (CABG). All patients had at least bilateral patent internal thoracic arteries bypass without indication of repeat revascularization. After a similar post-procedure outcome, despite one early death in TAVI group, the 1-year survival was 100% in surgical group and in transfemoral TAVI group, and 73% in transapical TAVI group. When previous CABG is the lone surgical risk factor, indications for a TAVI procedure have to be cautious, specially if transfemoral approach is not possible. PMID:22642844

  3. Valve-in-Valve Transcatheter Valve Implantation in the Non-Aortic Position

    PubMed Central

    Ranney, David N.; Williams, Judson B.; Wang, Andrew; Gaca, Jeffrey G.

    2016-01-01

    Background Transcatheter valve-in-valve (VIV) procedures are an alternative to standard surgical valve replacement in high risk patients. Methods Cases in which a commercially approved transcatheter aortic valve replacement (TAVR) device was used for a non-aortic VIV procedure between November 2013 and September 2015 are reviewed. Clinical, echocardiographic, and procedural details, patient survival, and symptom severity by NYHA class at follow-up were assessed. Results All patients were heart-team determined high-risk for conventional redo surgery (mean STS PROM = 6.8 ± 2.2%). Five patients underwent VIV replacement in the non-aortic position, 4 for bioprosthetic mitral valve dysfunction and one for bioprosthetic tricuspid valve dysfunction. Bioprosthetic failure was due to stenosis in 3 patients and regurgitation in 2 others. A balloon-expandable device was used for all patients (Edwards Lifesciences, Irvine, CA). Transcatheter VIV replacement was accomplished by the transapical (mitral) and transfemoral venous (tricuspid) approaches. Median post-operative length of stay was 5 days (range 3-12). No deaths occurred at a mean follow-up of 21 months. NYHA class at follow-up decreased from class IV at baseline to class I or II for all patients. No paravalvular leaks greater than trivial were encountered. Median mean gradient following mitral replacement was 6.5 mmHg (range 6-13 mmHg), and following tricuspid replacement was 4 mmHg. Post-operative complications included hematuria, epistaxis, acute kidney injury, and atrial fibrillation. Conclusions Transcatheter VIV implantation in the non-aortic position for dysfunctional bioprostheses can be performed safely with favorable clinical outcomes using a balloon expandable TAVR device. PMID:27059552

  4. Spatiotemporal control of endocytosis by phosphatidylinositol-3,4-bisphosphate.

    PubMed

    Posor, York; Eichhorn-Gruenig, Marielle; Puchkov, Dmytro; Schöneberg, Johannes; Ullrich, Alexander; Lampe, André; Müller, Rainer; Zarbakhsh, Sirus; Gulluni, Federico; Hirsch, Emilio; Krauss, Michael; Schultz, Carsten; Schmoranzer, Jan; Noé, Frank; Haucke, Volker

    2013-07-11

    Phosphoinositides serve crucial roles in cell physiology, ranging from cell signalling to membrane traffic. Among the seven eukaryotic phosphoinositides the best studied species is phosphatidylinositol-4,5-bisphosphate (PI(4,5)P2), which is concentrated at the plasma membrane where, among other functions, it is required for the nucleation of endocytic clathrin-coated pits. No phosphatidylinositol other than PI(4,5)P2 has been implicated in clathrin-mediated endocytosis, whereas the subsequent endosomal stages of the endocytic pathway are dominated by phosphatidylinositol-3-phosphates(PI(3)P). How phosphatidylinositol conversion from PI(4,5)P2-positive endocytic intermediates to PI(3)P-containing endosomes is achieved is unclear. Here we show that formation of phosphatidylinositol-3,4-bisphosphate (PI(3,4)P2) by class II phosphatidylinositol-3-kinase C2α (PI(3)K C2α) spatiotemporally controls clathrin-mediated endocytosis. Depletion of PI(3,4)P2 or PI(3)K C2α impairs the maturation of late-stage clathrin-coated pits before fission. Timed formation of PI(3,4)P2 by PI(3)K C2α is required for selective enrichment of the BAR domain protein SNX9 at late-stage endocytic intermediates. These findings provide a mechanistic framework for the role of PI(3,4)P2 in endocytosis and unravel a novel discrete function of PI(3,4)P2 in a central cell physiological process.

  5. Hydraulic servo control spool valve

    DOEpatents

    Miller, Donald M.

    1983-01-01

    A servo operated spool valve having a fixed sleeve and axially movable spool. The sleeve is machined in two halves to form a long, narrow tapered orifice slot across which a transverse wall of the spool is positioned. The axial position of the spool wall along the slot regulates the open orifice area with extreme precision.

  6. Valve operating mechanism for internal combustion engine

    SciTech Connect

    Nagahiro, K.; Ajiki, Y.; Katoh, M.; Inoue, K.

    1988-03-01

    A valve operating mechanism for operating a pair of valves of an internal combustion engine is described, comprising: a camshaft rotatable in synchronism with rotation of the internal combustion engine an having cams of different cam profiles; rocker arms held in sliding contact with the cams, respectively, for operating the valves according to the cam profiles of the cams; and means for independently selectively interconnecting and disconnecting selected of the rocker arms to operate the valves at different valve timings in low, medium and high speed ranges of the internal combustion engine.

  7. Valve operating mechanism for internal combustion engine

    SciTech Connect

    Inoue, K.; Nagahiro, K.; Ajiki, Y.; Katoh, M.

    1988-12-27

    A valve operating mechanism for operating a single valve of a particular cylinder of an internal combustion engine is described comprising: a camshaft rotatable in synchronism with rotation of the internal combustion engine; a plurality of cams on the camshaft with each of the cams bearing a different cam profile; a plurality of cam followers, each of which slidably engages one of the cams for selectively operating the valve according to the profile of the selected cam and one of which engages the valve; and means for selectively interconnecting and disconnecting the respective cam followers to operate the valve differently in different speed ranges of the internal combustion engine.

  8. Valve operating mechanism for internal combustion engine

    SciTech Connect

    Inoue, K.; Nagahiro, K.; Ajiki, Y.; Katoh, M.

    1988-12-13

    This patent describes a valve operating mechanism for operating valves of a particular cylinder of an internal combustion engine, comprising: a camshaft rotatable in synchronism with rotation of the internal combustion engine and having at least one cam; cam followers, one of which slidably engages with the cam for selectively operating the valves according to a cam profile of the cam; and means for selectively interconnecting and disconnecting the cam followers to operate the valves differently in different speed ranges of the internal combustion engine, the speed ranges including a range in which all of the valves remain inoperative.

  9. Intimal sarcoma of the pulmonary valve.

    PubMed

    Scheidl, Stefan; Taghavi, Shahrokh; Reiter, Ursula; Tröster, Natascha; Kovacs, Gabor; Rienmüller, Rainer; Lang, Susanna; Klepetko, Walter; Olschewski, Horst

    2010-04-01

    Pulmonary artery intimal sarcoma is a rare tumor of the cardiovascular system. Intimal sarcoma of the pulmonary valve itself has not been described. Embolization into pulmonary arteries originating from the pulmonary valve intimal sarcoma can mimic chronic thromboembolic pulmonary hypertension and mislead the diagnosis. We present and discuss a patient initially diagnosed as chronic thromboembolic pulmonary hypertension, treated by pulmonary endarterectomy. After 24 months, a tumor of the pulmonary valve was detected by echocardiography. The patient underwent removal and replacement of the pulmonary valve. Histology revealed pulmonary valve intimal sarcoma.

  10. Miniature motor-driven instrument valve

    NASA Technical Reports Server (NTRS)

    Minkin, H. L.

    1980-01-01

    Valve consists of small geared reversible motor, operated by momentary contact closure, which drives shaft with O-rings placed to seal selected ports. Shaft rotates and also moves axially, causing ports to be alternately connected and disconnected. Electrical control of valve is provided by limit switches and relays. Design has advantage over other available valves: less precision machining of parts is required; machining operations are less expensive. Seals are made with O-rings, which are easily replaceable and inexpensive; valve uses less power. It can be used in any application requiring pilot valves for control devices.

  11. Method for preparation of 7-hydroxy-1,2,3,4-tetrahydroquinoline from 1,2,3,4-tetrahydroquinoline

    DOEpatents

    Field, George; Hammond, Peter R.

    1994-01-01

    Methods for the efficient preparation of 7-hydroxy-1,2,3,4-tetrahydroquinoline include a first method in which the acylation of m-aminophenol obtains a lactam which is reduced to give the desired quinoline and a second method in which tetrahydroquinoline is nitrated and hydrogenated and then hydrolyzed to obtain the desire quinoline. 7-hydroxy-1,2,3,4-tetrahydroquinoline is used in the efficient synthesis of four lasing dyes of the rhodamine class.

  12. Method for preparation of 7-hydroxy-1,2,3,4-tetrahydroquinoline from 1,2,3,4-tetrahydroquinoline

    DOEpatents

    Field, G.; Hammond, P.R.

    1994-02-01

    Methods for the efficient preparation of 7-hydroxy-1,2,3,4-tetrahydroquinoline include a first method in which the acylation of m-aminophenol obtains a lactam which is reduced to give the desired quinoline and a second method in which tetrahydroquinoline is nitrated and hydrogenated and then hydrolyzed to obtain the desire quinoline. 7-hydroxy-1,2,3,4-tetrahydroquinoline is used in the efficient synthesis of four lasing dyes of the rhodamine class.

  13. Solenoid-valve-controlled fuel injection device

    SciTech Connect

    Oshizawa, H.

    1988-12-06

    This patent describes a solenoid-valve-controlled fuel injection device comprising: a fuel injection pump having a pump cylinder, a plunger rotatably and reciprocably disposed in the pump cylinder in a fluid-tight manner and defining a fuel pressurization chamber between a distal end of the plunger and the pump cylinder, a drive shaft rotatable in synchronism with an output shaft of an internal combustion engine, means responsive to rotation of the drive shaft for reciprocably displacing the plunger to pressurize fuel in the pressurization chamber, and a fuel chamber for being supplied with fuel from a fuel tank in response to rotation of the drive shaft, whereby the pressurized fuel can be fed into cylinders of the internal combustion engine; a solenoid valve for selectively opening and closing a communication passage by which the pressurization chamber and the fuel chamber communicate with each other; valve opening delay time detecting means for detecting a valve opening delay time of the solenoid valve; valve closing delay time detecting means for detecting a valve closing delay time of the solenoid valve; valve closing period calculating means for calculating a valve closing time of the solenoid valve according to operating conditions of the internal combustion engine; target fuel injection time calculating means for calculating a target fuel injection time according to the operating conditions of the internal combustion engine.

  14. Manufacturable plastic microfluidic valves using thermal actuation.

    PubMed

    Pitchaimani, Karthik; Sapp, Brian C; Winter, Adam; Gispanski, Austin; Nishida, Toshikazu; Hugh Fan, Z

    2009-11-07

    A low-cost, manufacturable, thermally actuated, plastic microfluidic valve has been developed. The valve contains an encapsulated, temperature-sensitive fluid, which expands, deflecting a thin elastomeric film into a fluidic channel to control fluid flow. The power input for thermal expansion of each microfluidic valve can be controlled using a printed circuit board (PCB)-based controller, which is suitable for mass production and large-scale integration. A plastic microfluidic device with such valves was fabricated using compression molding and thermal lamination. The operation of the valves was investigated by measuring a change in the microchannel's ionic conduction current mediated by the resistance variation corresponding to the deflection of the microvalve. Valve closing was also confirmed by the disappearance of fluorescence when a fluorescent solution was displaced in the valve region. Valve operation was characterized for heater power ranging from 36 mW to 80 mW. When the valve was actuating, the local channel temperature was 10 to 19 degrees C above the ambient temperature depending on the heater power used. Repetitive valve operations (up to 50 times) have been demonstrated with a flow resulting from a hydrostatic head. Valve operation was tested for a flow rate of 0.33-4.7 microL/min.

  15. Dual motion valve with single motion input

    NASA Technical Reports Server (NTRS)

    Belew, Robert (Inventor)

    1987-01-01

    A dual motion valve includes two dual motion valve assemblies with a rotary input which allows the benefits of applying both rotary and axial motion to a rotary sealing element with a plurality of ports. The motion of the rotary sealing element during actuation provides axial engagement of the rotary sealing element with a stationary valve plate which also has ports. Fluid passages are created through the valve when the ports of the rotary sealing element are aligned with the ports of the stationary valve plate. Alignment is achieved through rotation of the rotary sealing element with respect to the stationary valve plate. The fluid passages provide direct paths which minimize fluid turbulence created in the fluid as it passes through the valve.

  16. Evaluation of silicon-nitride ceramic valves.

    SciTech Connect

    Sun, J. G.; Zhang, J. M.; Andrews, M. J.; Tretheway, J. S.; Phillips, N. S .L.; Jensen, J. A.; Nuclear Engineering Division; Univ. of Texas; Caterpillar, Inc.

    2008-01-01

    Silicon-nitride ceramic valves can improve the performance of both light- and heavy-duty automotive engines because of the superior material properties of silicon nitrides over current metal alloys. However, ceramics are brittle materials that may introduce uncertainties in the reliability and durability of ceramic valves. As a result, the lifetime of ceramic valves are difficult to predict theoretically due to wide variations in the type and distribution of microstructural flaws in the material. Nondestructive evaluation (NDE) methods are therefore required to assess the quality and reliability of these valves. Because ceramic materials are optically translucent and the strength-limiting flaws are normally located near the valve surface, a laser-scatter method can be used for NDE evaluation of ceramic valves. This paper reviews the progress in the development of this NDE method and its application to inspect silicon-nitride ceramic valves at various stages of manufacturing and bench and engine tests.

  17. Spectroscopic properties of Eu 3+-doped KLa(PO 3) 4 and LiLa(PO 3) 4 powders

    NASA Astrophysics Data System (ADS)

    Ferhi, M.; Horchani-Naifer, K.; Férid, M.

    2011-11-01

    KLa(PO 3) 4 (KLP) and LiLa(PO 3) 4 (LLP) doped with different concentrations of Eu 3+ are grown by solid state reaction. The obtained powders are identified by X-ray diffraction, Raman and FT-IR spectroscopies. These polyphosphates KLa(PO 3) 4 and LiLa(PO 3) 4 crystallize in the monoclinic system but with different space groups respectively P2 1 and C2/c. The evolution of crystal lattice parameters as function of Eu 3+ concentration in these host lattices was studied. Spectroscopic properties of the Eu 3+-doped KLa(PO 3) 4 and LiLa(PO 3) 4 at room temperature (RT) are presented. The excitation spectra of the Eu 3+ ion in condensed polyphosphates along the UV-Visible domain are registered. They show that the position of the charge transfer band (CTB) depends on the host lattices. The effect of structural characteristics of condensed polyphosphates on their optical and colorimetric properties was investigated for the first time. Colorimetric parameters of the Eu 3+ ions red emission in KLP and LLP are determined and compared with other host matrices. Evolution of colorimetric properties as function of Eu 3+concentration was discussed.

  18. How to Make a Heart Valve: From Embryonic Development to Bioengineering of Living Valve Substitutes

    PubMed Central

    MacGrogan, Donal; Luxán, Guillermo; Driessen-Mol, Anita; Bouten, Carlijn; Baaijens, Frank; de la Pompa, José Luis

    2014-01-01

    Cardiac valve disease is a significant cause of ill health and death worldwide, and valve replacement remains one of the most common cardiac interventions in high-income economies. Despite major advances in surgical treatment, long-term therapy remains inadequate because none of the current valve substitutes have the potential for remodeling, regeneration, and growth of native structures. Valve development is coordinated by a complex interplay of signaling pathways and environmental cues that cause disease when perturbed. Cardiac valves develop from endocardial cushions that become populated by valve precursor mesenchyme formed by an epithelial–mesenchymal transition (EMT). The mesenchymal precursors, subsequently, undergo directed growth, characterized by cellular compartmentalization and layering of a structured extracellular matrix (ECM). Knowledge gained from research into the development of cardiac valves is driving exploration into valve biomechanics and tissue engineering directed at creating novel valve substitutes endowed with native form and function. PMID:25368013

  19. Synthesis and reactivity of coumarin 3,4-epoxide.

    PubMed

    Born, S L; Rodriguez, P A; Eddy, C L; Lehman-McKeeman, L D

    1997-11-01

    Coumarin is used widely as a fragrance constituent and is administered clinically in the treatment of certain lymphedemas and malignancies. Although toxicity occurs only rarely in humans treated clinically with high-dose coumarin, it is well established that coumarin is hepatotoxic in the rat. This species difference in susceptibility to toxicity reflects the disparate metabolic processes occurring in humans and rodents. In humans, coumarin is converted extensively via cytochrome P450 2A6 to the nontoxic 7-hydroxycoumarin metabolite. In contrast, coumarin 3,4-epoxidation is thought to predominate in rodent species, resulting in the formation of several potentially toxic metabolites. Coumarin epoxide is thought to be highly unstable and has not been isolated synthetically or as a microsomal product. To address this issue, coumarin 3,4-epoxide was synthesized, and its stability and fate have been determined. Coumarin 3,4-epoxide was prepared by reacting coumarin with dimethyldioxirane. The epoxide was stable in organic solvents and survived conditions required for analysis by gas chromotography. Its structure was confirmed via 1H-NMR and gas chromatography-mass spectrometry-infrared spectroscopy (GC-MS-IR). In contrast, coumarin 3,4-epoxide was unstable in aqueous solution, converting within 20 sec to a ring-opened compound. Using GC-MS-IR analysis, the single coumarin 3,4-epoxide product was identified as o-hydroxyphenylacetaldehyde (o-HPA). Although other investigators have suggested that 3-hydroxycoumarin is an intermediate in o-HPA formation from coumarin 3,4-epoxide, we have demonstrated that 3-hydroxycoumarin, incubated in an aqueous system or with liver microsomal proteins, does not form o-HPA. Thus, the results of the present work establish that coumarin 3,4-epoxide can be synthesized and that o-HPA, which has previously been shown to be a prominent coumarin metabolite in rat liver microsomal incubations, is formed directly from coumarin 3,4-epoxide. These

  20. Conical Seat Shut-Off Valve

    NASA Technical Reports Server (NTRS)

    Farner, Bruce

    2013-01-01

    A moveable valve for controlling flow of a pressurized working fluid was designed. This valve consists of a hollow, moveable floating piston pressed against a stationary solid seat, and can use the working fluid to seal the valve. This open/closed, novel valve is able to use metal-to-metal seats, without requiring seat sliding action; therefore there are no associated damaging effects. During use, existing standard high-pressure ball valve seats tend to become damaged during rotation of the ball. Additionally, forces acting on the ball and stem create large amounts of friction. The combination of these effects can lead to system failure. In an attempt to reduce damaging effects and seat failures, soft seats in the ball valve have been eliminated; however, the sliding action of the ball across the highly loaded seat still tends to scratch the seat, causing failure. Also, in order to operate, ball valves require the use of large actuators. Positioning the metal-to-metal seats requires more loading, which tends to increase the size of the required actuator, and can also lead to other failures in other areas such as the stem and bearing mechanisms, thus increasing cost and maintenance. This novel non-sliding seat surface valve allows metal-to-metal seats without the damaging effects that can lead to failure, and enables large seating forces without damaging the valve. Additionally, this valve design, even when used with large, high-pressure applications, does not require large conventional valve actuators and the valve stem itself is eliminated. Actuation is achieved with the use of a small, simple solenoid valve. This design also eliminates the need for many seals used with existing ball valve and globe valve designs, which commonly cause failure, too. This, coupled with the elimination of the valve stem and conventional valve actuator, improves valve reliability and seat life. Other mechanical liftoff seats have been designed; however, they have only resulted in

  1. Enhancement of Long-Wavelength Sensitivity of Optogenetic Microbial Rhodopsins by 3,4-Dehydroretinal†

    PubMed Central

    Sineshchekov, Oleg A.; Govorunova, Elena G.; Wang, Jihong; Spudich, John L.

    2012-01-01

    Electrogenic microbial rhodopsins (ion pumps and channelrhodopsins) are widely used to control activity of neurons and other cells by light (optogenetics). Long-wavelength absorption by optogenetic tools is desirable to increase the penetration depth of the stimulus light by minimizing tissue scattering and absorption by hemoglobin. A2 retinal (3,4-dehydroretinal) is a natural retinoid that serves as the chromophore in red-shifted visual pigments of several lower aquatic animals. Here we show that A2 retinal reconstitutes a fully functional archaerhodopsin-3 (AR-3) proton pump and four channelrhodopsin variants (CrChR1, CrChR2, CaChR1 and MvChR1). Substitution of A1 by A2 retinal significantly shifted the spectral sensitivity of all tested rhodopsins to longer wavelengths without altering other aspects of their function. The spectral shift upon substitution of A1 by A2 in AR-3 was close to that measured in other archaeal rhodopsins. Notably, the shifts in channelrhodopsins were larger than those measured in archaeal rhodopsins and close to those in animal visual pigments with similar absorption maxima of their A1-bound forms. Our results show that chromophore substitution provides a complementary strategy to improve the efficiency of optogenetic tools. PMID:22577956

  2. Field dependence of switching currents in an exchange biased spin valve.

    PubMed

    Nguyen, Hoang Yen Thi; Joo, Sung-Jung; Jung, Kuyoul; Shin, Kyung-Ho

    2007-01-01

    Current induced magnetic reversal due to spin transfer torque is a promising candidate in advanced information storage technology. It has been intensively studied. This work reports the field-dependence of switching-currents for current induced magnetization switching in a uncoupled nano-sized cobalt-based spin valve of exchange biased type. The dependency is investigated in hysteretic regime at room temperature, in comparison with that of a trilayer simple spin valve. In the simple spin valve, the switching currents behave to the positive and the negative applied magnetic field symmetrically. In the exchange biased type, in contrast, the switching currents respond to the negative field in a quite unusual and different manner than to the positive field. A negative magnetic field then can shift the switching-currents into either negative or positive current range, dependently on whether a parallel or an antiparallel state of the spin valve was produced by that field. This different character of switching currents in the negative field range can be explained by the effect of the exchange bias pinning field on the spin-polarizer (the fixed Co layer) of the exchange biased spin valve. That unidirectional pinning filed could suppress the thermal magnetization fluctuation in the spin-polarizer, leading to a higher spin polarization of the current, and hence a lower switching current density than in the simple spin valve.

  3. Early Clinical Outcome of Mitral Valve Replacement Using a Newly Designed Stentless Mitral Valve for Failure of Initial Mitral Valve Repair.

    PubMed

    Nishida, Hidefumi; Kasegawa, Hitoshi; Kin, Hajime; Takanashi, Shuichiro

    2016-12-21

    Here we report the early outcome of mitral valve replacement using a newly designed stentless mitral valve for failure of initial mitral valve repair. Mitral valve plasty (MVP) for mitral regurgitation is currently a standard technique performed worldwide. However, whether mitral valve repair should be performed for patients with advanced leaflet damage or complicated pathology remains controversial. Mitral valve replacement might be feasible for patients who have undergone failed initial MVP; however, it is not an optimal treatment because of poor valve durability and the need for anticoagulative therapy. We report two cases of successful mitral valve replacement using a newly designed stentless mitral valve made of fresh autologous pericardium, which may have a potential benefit over mitral valve repair or mitral valve replacement with a mechanical or bioprosthetic valve.

  4. 1,3,4-oxadiazole derivatives as potential biological agents.

    PubMed

    Sun, Juan; Makawana, Jigar A; Zhu, Hai-Liang

    2013-10-01

    The synthesis of novel compound libraries along with screening is a rapid and effective approach for the discovery of potential chemical agents, and it becomes an important method in pharmaceutical chemistry research. 1,3,4- oxadiazole derivatives as the typical heterocyclic compounds, exhibit a broad spectrum of biological activities and vital leading compounds for the development of chemical drugs. Herein, we focus on the synthesis and screening of novel 1,3,4-oxadiazoles derivatives with antimicrobial, antitumor or antiviral activities during the past decade. In this review, we discussed the synthetic development of 1,3,4-oxadiazoles derivatives, and also the relevant bioactivity and their prospects as the potential chemical drugs.

  5. Poly(1,3,4-oxadiazoles) via aromatic nucleophilic displacement

    NASA Technical Reports Server (NTRS)

    Connell, John W. (Inventor); Hergenrother, Paul M. (Inventor); Wolf, Peter (Inventor)

    1992-01-01

    Poly(1,3,4-oxadiazoles) (POX) are prepared by the aromatic nucleophilic displacement reaction of di(hydroxyphenyl) 1,3,4-oxadiazole monomers with activated aromatic dihalides or activated aromatic dinitro compounds. The polymerizations are carried out in polar aprotic solvents such as sulfolane or diphenylsulfone using alkali metal bases such as potassium carbonate at elevated temperatures under nitrogen. The di(hydroxyphenyl) 1,3,4-oxadiazole monomers are synthesized by reacting 4-hydroxybenzoic hydrazide with phenyl 4-hydrobenzoate in the melt and also by reacting aromatic dihydrazides with two moles of phenyl 4-hydroxybenzoate in the melt. This synthetic route has provided high molecular weight POX of new chemical structure, is economically and synthetically more favorable than other routes, and allows for facile chemical structure variation due to the large variety of activated aromatic dihalides which are available.

  6. Bis(4-(3,4-dimethylenepyrrolidyl)-phenyl) methane

    NASA Technical Reports Server (NTRS)

    Ottenbrite, Raphael M. (Inventor)

    1989-01-01

    It is the primary object of the present invention to prepare high temperature polymeric materials, especially linear aromatic polyimides, which maintain their integrity and toughness during long exposure times at elevated temperatures. According to the present invention, this object is achieved, and the attending benefits are obtained, by first providing the bis(exocyclodiene) bis(4-(3,4-dinethylene pyrrolidyl) phenyl) methane, which is formed from the monomer N-phenyl 3,4-dimethylene pyrrolidine. This bis-(exocyclodiene) undergoes Diels-Alder reaction with a bismaleimide without the evolution of gaseous by-products, to form the aromatic polyimide.

  7. Psychopathology of Shift Work.

    ERIC Educational Resources Information Center

    Akinnawo, Ebenezer Olutope

    1989-01-01

    Examined incidence and nature of general psychopathology among Nigerian shift workers (N=320). Found shift workers more significantly psychopathological than non-shift workers (p<0.001). Prominent disorders among shift workers were intellectual, sleep, mood, and general somatic disorders. No significant difference could be attributed to gender…

  8. Smart actuators: Valve Health Monitor (VHM) system

    NASA Astrophysics Data System (ADS)

    Perotti, José; Lucena, Angel; Burns, Bradley

    2006-05-01

    The health of electromechanical systems (actuators) and specifically of solenoid valves is a primary concern at Kennedy Space Center (KSC). These systems control the storage and transfer of such commodities as liquid hydrogen. The potential for the failure of electromechanical systems to delay a scheduled launch or to cause personnel injury requires continual maintenance and testing of the systems to ensure their readiness. Monitoring devices need to be incorporated into these systems to verify the health and performance of the valves during real operating conditions. It is very advantageous to detect degradation and/or potential problems before they happen. This feature will not only provide safer operation but save the cost of unnecessary maintenance and inspections. Solenoid valve status indicators are often based upon microswitches that work by physically contacting a valve's poppet assembly. All of the physical contact and movement tends to be very unreliable and is subject to wear and tear of the assemblies, friction, breakage of the switch, and even leakage of the fluid (gas or liquid) in the valve. The NASA Instrumentation Branch, together with its contractor, ASRC Aerospace, has developed a solenoid valve smart current signature sensor that monitors valves in a noninvasive mode. The smart system monitors specific electrical parameters of the solenoid valves and detects and predicts the performance and health of the device. The information obtained from the electrical signatures of these valves points to not only electrical components failures in the valves but also mechanical failures and/or degradations.

  9. Thermostatic Valves Containing Silicone-Oil Actuators

    NASA Technical Reports Server (NTRS)

    Bhandari, Pradeep; Birur, Gajanana C.; Bame, David P.; Karlmann, Paul B.; Prina, Mauro; Young, William; Fisher, Richard

    2009-01-01

    Flow-splitting and flow-mixing thermally actuated spool valves have been developed for controlling flows of a heat-transfer fluid in a temperature-regulation system aboard the Mars Science Laboratory (MSL) rover. Valves like these could also be useful in terrestrial temperature-regulation systems, including automobile air-conditioning systems and general refrigeration systems. These valves are required to provide smoother actuation over a wider temperature range than the flow-splitting, thermally actuated spool valves used in the Mars Explorer Rover (MER). Also, whereas the MER valves are unstable (tending to oscillate) in certain transition temperature ranges, these valves are required not to oscillate. The MER valves are actuated by thermal expansion of a wax against spring-loaded piston rods (as in common automotive thermostats). The MSL valves contain similar actuators that utilize thermal expansion of a silicone oil, because silicone-oil actuators were found to afford greater and more nearly linear displacements, needed for smoother actuation, over the required wider temperature range. The MSL valves also feature improved spool designs that reflect greater understanding of fluid dynamics, consideration of pressure drops in valves, and a requirement for balancing of pressures in different flow branches.

  10. In Vitro System for Measuring Chordal Force Changes Following Mitral Valve Patch Repair

    PubMed Central

    Ostli, B; Vester-Petersen, J; Askov, JB; Honge, JL; Levine, RA; Hagège, A; Nielsen, SL; Hasenkam, JM; Nygaard, H; Jensen, MO

    2013-01-01

    Background Attention towards optimization of mitral valve repair methods is increasing. Patch augmentation is one strategy utilized to correct functional mitral regurgitation or systolic anterior motion in complex mitral valve repairs. This article describes a system for investigating the redistribution of chordae tendineae tension as a reflection of altered stress distribution of the valve leaflet following patch augmentation. Methods and materials An in vitro test setup was constructed to hold native porcine mitral valves containing an annulus and papillary muscle positioning system. The alterations caused by patch augmentation should be visual from both the atrial and ventricular views. Ventricular pressure was regulated stepwise in a range of 0-150 mmHg. To test the system, the anterior mitral leaflet was extended by a pericardial patch sutured to the mid/basal part of the leaflet, and the chordae tendineae force was measured as the ventricular pressure was applied. Results The system demonstrated the capacity to hold native porcine mitral valves and introducing patch repairs according to clinical practice. The porcine mitral valve test setup indicated strong correlation between the forces in the mitral valve secondary chordae tendineae and the applied transvalvular pressure (R2 = 0.95). Conclusion This test setup proved the ability to obtain normal mid-systolic mitral valve function, secondary chordae force measurements, and important preservation of the visual access: Hence, obtaining the pressure-force relationship as well as identifying any shift of the secondary chordae insertion point on the anterior leaflet relative to the coaptation zone was made possible. PMID:26273417

  11. Simple Check Valves for Microfluidic Devices

    NASA Technical Reports Server (NTRS)

    Willis, Peter A.; Greer, Harold F.; Smith, J. Anthony

    2010-01-01

    A simple design concept for check valves has been adopted for microfluidic devices that consist mostly of (1) deformable fluorocarbon polymer membranes sandwiched between (2) borosilicate float glass wafers into which channels, valve seats, and holes have been etched. The first microfluidic devices in which these check valves are intended to be used are micro-capillary electrophoresis (microCE) devices undergoing development for use on Mars in detecting compounds indicative of life. In this application, it will be necessary to store some liquid samples in reservoirs in the devices for subsequent laboratory analysis, and check valves are needed to prevent cross-contamination of the samples. The simple check-valve design concept is also applicable to other microfluidic devices and to fluidic devices in general. These check valves are simplified microscopic versions of conventional rubber- flap check valves that are parts of numerous industrial and consumer products. These check valves are fabricated, not as separate components, but as integral parts of microfluidic devices. A check valve according to this concept consists of suitably shaped portions of a deformable membrane and the two glass wafers between which the membrane is sandwiched (see figure). The valve flap is formed by making an approximately semicircular cut in the membrane. The flap is centered over a hole in the lower glass wafer, through which hole the liquid in question is intended to flow upward into a wider hole, channel, or reservoir in the upper glass wafer. The radius of the cut exceeds the radius of the hole by an amount large enough to prevent settling of the flap into the hole. As in a conventional rubber-flap check valve, back pressure in the liquid pushes the flap against the valve seat (in this case, the valve seat is the adjacent surface of the lower glass wafer), thereby forming a seal that prevents backflow.

  12. Mechanical Prosthetic Valves and Pregnancy

    PubMed Central

    Panduranga, Prashanth; El-Deeb, Mohammed; Jha, Chitra

    2014-01-01

    Choosing the best anticoagulant therapy for a pregnant patient with a mechanical prosthetic valve is controversial and the published international guidelines contain no clear-cut consensus on the best approach. This is due to the fact that there is presently no anticoagulant which can reliably decrease thromboembolic events while avoiding damage to the fetus. Current treatments include either continuing oral warfarin or substituting warfarin for subcutaneous unfractionated heparin or low-molecular-weight heparin (LMWH) in the first trimester (6–12 weeks) or at any point throughout the pregnancy. However, LMWH, while widely-prescribed, requires close monitoring of the blood anti-factor Xa levels. Unfortunately, facilities for such monitoring are not universally available, such as within hospitals in developing countries. This review evaluates the leading international guidelines concerning anticoagulant therapy in pregnant patients with mechanical prosthetic valves as well as proposing a simplified guideline which may be more relevant to hospitals in this region. PMID:25364545

  13. Vitrification of heart valve tissues.

    PubMed

    Brockbank, Kelvin G M; Chen, Zhenzhen; Greene, Elizabeth D; Campbell, Lia H

    2015-01-01

    Application of the original vitrification protocol used for pieces of heart valves to intact heart valves has evolved over time. Ice-free cryopreservation by Protocol 1 using VS55 is limited to small samples where relatively rapid cooling and warming rates are possible. VS55 cryopreservation typically provides extracellular matrix preservation with approximately 80 % cell viability and tissue function compared with fresh untreated tissues. In contrast, ice-free cryopreservation using VS83, Protocols 2 and 3, has several advantages over conventional cryopreservation methods and VS55 preservation, including long-term preservation capability at -80 °C; better matrix preservation than freezing with retention of material properties; very low cell viability, reducing the risks of an immune reaction in vivo; reduced risks of microbial contamination associated with use of liquid nitrogen; improved in vivo functions; no significant recipient allogeneic immune response; simplified manufacturing process; increased operator safety because liquid nitrogen is not used; and reduced manufacturing costs.

  14. [MINIMALLY INVASIVE AORTIC VALVE REPLACEMENT].

    PubMed

    Tabata, Minoru

    2016-03-01

    Minimally invasive aortic valve replacement (MIAVR) is defined as aortic valve replacement avoiding full sternotomy. Common approaches include a partial sternotomy right thoracotomy, and a parasternal approach. MIAVR has been shown to have advantages over conventional AVR such as shorter length of stay and smaller amount of blood transfusion and better cosmesis. However, it is also known to have disadvantages such as longer cardiopulmonary bypass and aortic cross-clamp times and potential complications related to peripheral cannulation. Appropriate patient selection is very important. Since the procedure is more complex than conventional AVR, more intensive teamwork in the operating room is essential. Additionally, a team approach during postoperative management is critical to maximize the benefits of MIAVR.

  15. Year 3/4 Children's Forms of Justification

    ERIC Educational Resources Information Center

    Widjaja, Wanty

    2014-01-01

    Engaging children in justifying, forming conjectures and generalising is critical to develop their mathematical reasoning. Previous studies have revealed limited opportunities for primary school children to justify their thinking, form conjectures and generalise in mathematics lessons. Forms of justification of Year 3/4 children from three schools…

  16. Accidental ingestion of 'Ecstasy' (3,4-methylenedioxymethylamphetamine).

    PubMed Central

    Bedford Russell, A R; Schwartz, R H; Dawling, S

    1992-01-01

    There is no report of the effects of 'Ecstasy' (3,4-methylenedioxymethylamphetamine) poisoning in childhood. The case of a 13 month old boy who ingested one capsule of Ecstasy is reported. Neurological and cardiovascular side effects predominated, which responded well to treatment with a chlormethiazole infusion. PMID:1358033

  17. Anxiety Self Report (ASR (1,2,3,4,). X

    ERIC Educational Resources Information Center

    Parsons, Jane S.

    The Anxiety Self Report (ASR 1,2,3,4) is provided, followed by information about the report. The ASR is discussed as to its development, description, response bias, scoring procedures, reliability, stability, validity, and correlation between the ASR and the Manifest Anxiety Scale. (For related documents, see TM 002 928, 929.) (DB)

  18. 43 CFR 4120.3-4 - Standards, design and stipulations.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... LAND MANAGEMENT, DEPARTMENT OF THE INTERIOR RANGE MANAGEMENT (4000) GRAZING ADMINISTRATION-EXCLUSIVE OF ALASKA Grazing Management § 4120.3-4 Standards, design and stipulations. Range improvement permits and... 43 Public Lands: Interior 2 2014-10-01 2014-10-01 false Standards, design and stipulations....

  19. 6. GATES 3, 4, AND 5, INTAKE CHANNEL LOOKING EAST; ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    6. GATES 3, 4, AND 5, INTAKE CHANNEL LOOKING EAST; WATER THAT PASSED INTO PIPES ENTERED SETTLING VAULT. - Hondius Water Line, 1.6 miles Northwest of Park headquarters building & 1 mile Northwest of Beaver Meadows entrance station, Estes Park, Larimer County, CO

  20. 41 CFR 60-3.4 - Information on impact.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 3-UNIFORM GUIDELINES ON EMPLOYEE SELECTION PROCEDURES (1978) General Principles § 60-3.4 Information... records or other information which will disclose the impact which its tests and other selection procedures... selection rates. The “bottom line.” If the information called for by sections 4A and B of this section...

  1. 43 CFR 5511.3-4 - Removal by agent.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ..., DEPARTMENT OF THE INTERIOR FOREST MANAGEMENT (5000) FREE USE OF TIMBER Free Use Regulations § 5511.3-4 Removal by agent. A free-use permittee may procure the timber by agent. Such agent shall not, however, be paid more than fair compensation for the time, labor and money expended in procuring timber...

  2. 43 CFR 5511.3-4 - Removal by agent.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ..., DEPARTMENT OF THE INTERIOR FOREST MANAGEMENT (5000) FREE USE OF TIMBER Free Use Regulations § 5511.3-4 Removal by agent. A free-use permittee may procure the timber by agent. Such agent shall not, however, be paid more than fair compensation for the time, labor and money expended in procuring timber...

  3. 13. PRATT STREET BULKHEAD: SECTIONS 2, 3, 4, 5, AND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    13. PRATT STREET BULKHEAD: SECTIONS 2, 3, 4, 5, AND 6, DRAWER 10, PLAN NO. 1, 1 IN. = 15 FT. AND 1/2 IN. = 1 FT., APRIL 25, 1906, DRAWING SHOWS DESIGN FOR PRATT STREET BULKHEAD BETWEEN PIERS - Baltimore Inner Harbor, Pier 5, South of Pratt Street between Market Place & Concord Street, Baltimore, Independent City, MD

  4. 43 CFR 4120.3-4 - Standards, design and stipulations.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 43 Public Lands: Interior 2 2012-10-01 2012-10-01 false Standards, design and stipulations. 4120.3... ALASKA Grazing Management § 4120.3-4 Standards, design and stipulations. Range improvement permits and cooperative range improvement agreements shall specify the standards, design, construction and...

  5. 9 CFR 3.4 - Outdoor housing facilities.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Transportation of Dogs and Cats 1 Facilities and Operating Standards § 3.4 Outdoor housing facilities. (a) Restrictions. (1) The following categories of dogs or cats must not be kept in outdoor facilities, unless that practice is specifically approved by the attending veterinarian: (i) Dogs or cats that are not...

  6. 9 CFR 3.4 - Outdoor housing facilities.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... Transportation of Dogs and Cats 1 Facilities and Operating Standards § 3.4 Outdoor housing facilities. (a) Restrictions. (1) The following categories of dogs or cats must not be kept in outdoor facilities, unless that practice is specifically approved by the attending veterinarian: (i) Dogs or cats that are not...

  7. 9 CFR 3.4 - Outdoor housing facilities.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... Transportation of Dogs and Cats 1 Facilities and Operating Standards § 3.4 Outdoor housing facilities. (a) Restrictions. (1) The following categories of dogs or cats must not be kept in outdoor facilities, unless that practice is specifically approved by the attending veterinarian: (i) Dogs or cats that are not...

  8. 9 CFR 3.4 - Outdoor housing facilities.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... Transportation of Dogs and Cats 1 Facilities and Operating Standards § 3.4 Outdoor housing facilities. (a) Restrictions. (1) The following categories of dogs or cats must not be kept in outdoor facilities, unless that practice is specifically approved by the attending veterinarian: (i) Dogs or cats that are not...

  9. 9 CFR 3.4 - Outdoor housing facilities.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... Transportation of Dogs and Cats 1 Facilities and Operating Standards § 3.4 Outdoor housing facilities. (a) Restrictions. (1) The following categories of dogs or cats must not be kept in outdoor facilities, unless that practice is specifically approved by the attending veterinarian: (i) Dogs or cats that are not...

  10. Short-term hemodynamic performance of the mitral Carpentier-Edwards PERIMOUNT pericardial valve. Carpentier-Edwards PERIMOUNT Investigators

    NASA Technical Reports Server (NTRS)

    Firstenberg, M. S.; Morehead, A. J.; Thomas, J. D.; Smedira, N. G.; Cosgrove, D. M. 3rd; Marchand, M. A.

    2001-01-01

    BACKGROUND: Although long-term durability data exist, little data are available concerning the hemodynamic performance of the Carpentier-Edwards PERIMOUNT pericardial valve in the mitral position. METHODS: Sixty-nine patients who were implanted with mitral PERIMOUNT valves at seven international centers between January 1996 and February 1997 consented to participate in a short-term echocardiography follow-up. Echocardiographs were collected at a mean of 600+/-133 days after implantation (range, 110 to 889 days); all underwent blinded core lab analysis. RESULTS: At follow-up, peak gradients were 9.09+/-3.43 mm Hg (mean, 4.36+/-1.79 mm Hg) and varied inversely with valve size (p < 0.05). The effective orifice areas were 2.5+/-0.6 cm2 and tended to increase with valve size (p = 0.08). Trace mitral regurgitation (MR) was common (n = 48), 9 patients had mild MR, 1 had moderate MR, none had severe MR. All MR was central (n = 55) or indeterminate (n = 3). No paravalvular leaks were observed. Mitral regurgitation flow areas were 3.4+/-2.8 cm2 and were without significant volumes. CONCLUSIONS: In this multicenter study, these mitral valves are associated with trace, although physiologically insignificant, central MR. Despite known echocardiographic limitations, the PERIMOUNT mitral valves exhibit similar hemodynamics to other prosthetic valves.

  11. [Research on the modeling of biological valves poppet].

    PubMed

    Yuan, Quan; Zhou, Yonghui; Cong, Hua

    2005-12-01

    In this paper are described the construction of biological valves poppet and the establishment of mathematical model according to cardiac valves hydrokinetics and the theory of membrane. Finite elements of biological valves leaflets connected with biological valves poppet are analyzed. The method of constructing geometric model is reasonable. CAD of biological valves poppet is realized by structured programming and parameterization.

  12. 46 CFR 56.20-9 - Valve construction.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ...) motion of the handwheel or operating lever as seen by one facing the end of the valve stem. Each gate, globe, and angle valve must generally be of the rising-stem type, preferably with the stem threads... nonrising-stem valve will be acceptable. Each nonrising-stem valve, lever-operated valve, or other...

  13. 46 CFR 56.20-9 - Valve construction.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ...) motion of the handwheel or operating lever as seen by one facing the end of the valve stem. Each gate, globe, and angle valve must generally be of the rising-stem type, preferably with the stem threads... nonrising-stem valve will be acceptable. Each nonrising-stem valve, lever-operated valve, or other...

  14. 46 CFR 56.20-9 - Valve construction.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ...) motion of the handwheel or operating lever as seen by one facing the end of the valve stem. Each gate, globe, and angle valve must generally be of the rising-stem type, preferably with the stem threads... nonrising-stem valve will be acceptable. Each nonrising-stem valve, lever-operated valve, or other...

  15. Miniature electrically operated diaphragm valve

    DOEpatents

    Adkins, Douglas R.; Spletzer, Barry L.; Wong, Chungnin C.; Frye-Mason, Gregory C.; Fischer, Gary J.; Hesketh, Peter J.

    2001-01-01

    The present invention provides a miniature electrically operated valve that can stand off significant pressures, that can be inexpensively produced, and that can be made to operate without continuous electrical power. A valve according to the present invention comprises a housing and a beam mounted with the housing. A diaphragm mounted with the housing forms a sealed fluid volume. An electromagnetic energy source, such as an electromagnetic coil, mounts with the housing and when energized urges the beam in one direction. The beam can be urged in the opposing direction by passive means or by reversing the polarity of the electromagnetic energy source or by a second electromagnetic energy source. Two fluid ports mount with the housing. A first fluid port mounts so that, as the beam is urged in one direction or the opposite, the beam urges the diaphragm to move between engaging and substantially sealing the fluid port and disengaging and not substantially sealing the fluid port. A seat can be mounted with the diaphragm to aid in sealing the fluid port. Latching mechanisms such as permanent magnets can be mounted so that the valve remains in the open or closed positions without continuous electrical power input. Fluid can flow through the housing between the two fluid ports when the diaphragm does not seal the first fluid port, but can be prevented from flowing by urging the beam so that the diaphragm seals the first fluid port. Various embodiments accommodate various latching mechanisms, electromagnetic energy sources, number of fluid ports, and diaphragm design considerations.

  16. Vascularization of bioprosthetic valve material

    NASA Astrophysics Data System (ADS)

    Boughner, Derek R.; Dunmore-Buyze, Joy; Heenatigala, Dino; Lohmann, Tara; Ellis, Chris G.

    1999-04-01

    Cell membrane remnants represent a probable nucleation site for calcium deposition in bioprosthetic heart valves. Calcification is a primary failure mode of both bovine pericardial and porcine aortic heterograft bioprosthesis but the nonuniform pattern of calcium distribution within the tissue remains unexplained. Searching for a likely cellular source, we considered the possibility of a previously overlooked small blood vessel network. Using a videomicroscopy technique, we examined 5 matched pairs of porcine aortic and pulmonary valves and 14 samples from 6 bovine pericardia. Tissue was placed on a Leitz Metallux microscope and transilluminated with a 75 watt mercury lamp. Video images were obtained using a silicon intensified target camera equipped with a 431 nm interference filter to maximize contrast of red cells trapped in a capillary microvasculature. Video images were recorded for analysis on a Silicon Graphics Image Analysis work station equipped with a video frame grabber. For porcine valves, the technique demonstrated a vascular bed in the central spongiosa at cusp bases with vessel sizes from 6-80 micrometers . Bovine pericardium differed with a more uniform distribution of 7-100 micrometers vessels residing centrally. Thus, small blood vessel endothelial cells provide a potential explanation patterns of bioprosthetic calcification.

  17. VACUUM TRAP AND VALVE COMBINATION

    DOEpatents

    Milleron, N.; Levenson, L.

    1963-02-19

    This patent relates to a vacuum trap and valve combination suitable for use in large ultra-high vacuum systems. The vacuum trap is a chamber having an inlet and outlet opening which may be made to communicate with a chamber to be evacuated and a diffusion pump, respectively. A valve is designed to hermeticaliy seal with inlet opening and, when opened, block the line-of- sight'' between the inlet and outlet openings, while allowing a large flow path between the opened vaive and the side walls of the trap. The interior of the trap and the side of the valve facing the inlet opening are covered with an impurity absorbent, such as Zeolite or activated aluminum. Besides the advantage of combining two components of a vacuum system into one, the present invention removes the need for a baffle between the pump and the chamber to be evacuated. In one use of a specific embodiment of this invention, the transmission probability was 45 and the partial pressure of the pump fluid vapor in the vacuum chamber was at least 100 times lower than its vapor pressure. (AEC)

  18. Rapid simultaneous determination of amphetamine, methamphetamine, 3,4-methylenedioxyamphetamine, 3,4-methylenedioxymethamphetamine, and 3,4-methylenedioxyethylamphetamine in urine by fast gas chromatography-mass spectrometry.

    PubMed

    Klette, Kevin L; Jamerson, Matthew H; Morris-Kukoski, Cynthia L; Kettle, Aaron R; Snyder, J Jacob

    2005-10-01

    The use of fast gas chromatography-mass spectrometry (FGC-MS) was investigated to improve the efficiency of analysis of urine specimens that previously screened presumptively positive for amphetamine (AMP), methamphetamine (MAMP), 3,4-methylenedioxyamphetamine (MDA), 3,4-methylenedioxymethamphetamine (MDMA), and/or 3,4 methylenedioxyethylamphetamine (MDEA) by immunoassay testing. Specimens were pretreated with basic sodium periodate, extracted using a positive-pressure manifold/cation-exchange solid-phase cartridge methodology, and derivatized using 4-carbethoxyhexafluorobutyryl chloride (4-CB). The analytical method was compared to traditional GC-MS analysis and evaluated with respect to assay chromatography, linearity, sensitivity, precision, accuracy, and reproducibility. The limits of detection were 62.5 ng/mL for MDA and 31.25 ng/mL for AMP, MAMP, MDMA, and MDEA. All of the target analytes were linear to 12,000 ng/mL with the exception of MAMP which was linear to 10,000 ng/mL. The intra-assay precision of a 500 ng/mL multiconstituent control (n=15) ranged from 522.6 to 575.9 ng/mL with a coefficient of variation of less than 3.8%. Authentic human urine specimens (n=187) previously determined to contain the target analytes were re-extracted and analyzed by both FGC-MS and the currently utilized GC-MS method. No significant differences in specimen concentration were observed between these analytical methods. No interferences were seen when the performance of the FGC-MS method was challenged with ephedrine, pseudoephedrine, phenylpropanolamine, and phentermine. When compared to traditional GC-MS analysis, FGC-MS analysis provided a dramatic reduction in retention time for amphetamine (1.8 min vs. 4.12 min). For example, the FGC-MS method reduced overall run time for a batch of 56 specimens from 12.0 h to 7.25 h. This reduction in analysis time makes FGC-MS an attractive alternative to traditional GC-MS by allowing a laboratory greater flexibility in the purchase

  19. Substituent effect on photophysical properties of bi-1,3,4-oxadiazole derivatives in solution

    NASA Astrophysics Data System (ADS)

    Chen, Fangyi; Tian, Taiji; Zhao, Chengxiao; Bai, Binglian; Li, Min; Wang, Haitao

    2016-04-01

    A series of phenyl substituted bi-1,3,4-oxadiazole derivatives were designed and synthesized; the effect of substituent on the photophysical properties and molecular electronic structures was fully studied by the combination of experimental techniques and theoretical calculations. Compared to parent compound without any substituent (BOXD), fluoro-substituent shows little effect on the absorption and emission spectra, whilst a little larger spectral red-shift could be observed for methoxy-, nitro-substituted derivatives and thienyl-substituted bi-1,3,4-oxadiazole (TBOXD). These spectral changes can be well explained by theoretically calculated HOMO and LUMO energy level changes. All these molecules show high fluorescence quantum yield except for nitro-substituted derivative in dilute solutions. The quantum yield of BOXD changes with the concentration and exhibits a high value at the concentrated solution. This work revealed the influence of substituent on the photophysical properties of bi-1,3,4-oxadizaole derivatives in dilute solutions and provided guidance for designing molecules with potential application.

  20. The spectroscopic and quantum chemical studies of 3,4-difluoroaniline

    NASA Astrophysics Data System (ADS)

    Kose, Etem; Karabacak, Mehmet; Atac, Ahmet

    2015-05-01

    Spectroscopic and structural investigations of 3,4-difluoroaniline molecule are presented by using experimental (FT-IR, FT-Raman, 1H and 13C NMR, and UV-Vis) techniques and theoretical (DFT approach) calculations. FT-IR and FT-Raman spectra of 3,4-difluoroaniline molecule are recorded in the region 4000-400 cm-1 and 3500-10 cm-1 in the liquid phase, respectively. The NMR chemical shifts (1H and 13C) are recorded in chloroform-d solution. The UV absorption spectra of 3,4-difluoroaniline dissolved in ethanol and water are recorded in the range of 200-400 nm. Experimental results are supported with the following theoretical calculations; the optimized geometry and vibrational (FT-IR and FT-Raman) spectra are carried out by DFT (B3LYP)/6-311++G(d,p) basis set calculations. The nuclear magnetic resonance spectra (1H and 13C NMR) are obtained by using the gauge-invariant atomic orbital method. Moreover, electronic characteristics, such as HOMO and LUMO energies, density of state diagrams, and molecular electrostatic potential surface are investigated. Nonlinear optical properties and thermodynamic features are also outlined theoretically. An excellent correlation of theoretical and experimental results provides a detailed description of the structural and physicochemical properties of the molecule. Thus, this work leads to a deep understanding of the characteristics of di-substituted aniline derivatives.

  1. Percutaneous implantation of CoreValve aortic prostheses in patients with a mechanical mitral valve.

    PubMed

    Bruschi, Giuseppe; De Marco, Federico; Oreglia, Jacopo; Colombo, Paola; Fratto, Pasquale; Lullo, Francesca; Paino, Roberto; Frigerio, Maria; Martinelli, Luigi; Klugmann, Silvio

    2009-11-01

    Concerns exist in the field of transcatheter aortic valve implantation regarding the treatment of patients with mechanical mitral valve for possible interference between the percutaneous aortic valve and the mechanical mitral prosthesis. We report our experience with percutaneous aortic valve implantation in 4 patients with severe aortic stenosis, previously operated on for mitral valve replacement with a mechanical prosthesis. All patients underwent uneventful percutaneous retrograde CoreValve implantation (CoreValve Inc, Irvine, CA). No deformation of the nitinol tubing of the prostheses (ie, neither distortion nor malfunction of the mechanical valve in the mitral position) occurred in any of the patients. All patients are alive and asymptomatic at a mean follow-up of 171 days.

  2. Force measuring valve assemblies, systems including such valve assemblies and related methods

    DOEpatents

    DeWall, Kevin George [Pocatello, ID; Garcia, Humberto Enrique [Idaho Falls, ID; McKellar, Michael George [Idaho Falls, ID

    2012-04-17

    Methods of evaluating a fluid condition may include stroking a valve member and measuring a force acting on the valve member during the stroke. Methods of evaluating a fluid condition may include measuring a force acting on a valve member in the presence of fluid flow over a period of time and evaluating at least one of the frequency of changes in the measured force over the period of time and the magnitude of the changes in the measured force over the period of time to identify the presence of an anomaly in a fluid flow and, optionally, its estimated location. Methods of evaluating a valve condition may include directing a fluid flow through a valve while stroking a valve member, measuring a force acting on the valve member during the stroke, and comparing the measured force to a reference force. Valve assemblies and related systems are also disclosed.

  3. 100. INTERIOR OF SKID 9A: VENT VALVE AND RELIEF VALVE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    100. INTERIOR OF SKID 9A: VENT VALVE AND RELIEF VALVE FOR RAPID-LOAD LIQUID OXYGEN TANK - Vandenberg Air Force Base, Space Launch Complex 3, Launch Pad 3 East, Napa & Alden Roads, Lompoc, Santa Barbara County, CA

  4. Miniature piezo electric vacuum inlet valve

    DOEpatents

    Keville, R.F.; Dietrich, D.D.

    1998-03-24

    A miniature piezo electric vacuum inlet valve having a fast pulse rate and is battery operated with variable flow capability is disclosed. The low power (<1.6 watts), high pulse rate (<2 milliseconds), variable flow inlet valve is utilized for mass spectroscopic applications or other applications where pulsed or continuous flow conditions are needed. The inlet valve also has a very minimal dead volume of less than 0.01 std/cc. The valve can utilize, for example, a 12 Vdc input/750 Vdc, 3 mA output power supply compared to conventional piezo electric valves which require preloading of the crystal drive mechanism and 120 Vac, thus the valve of the present invention is smaller by a factor of three. 6 figs.

  5. Miniature piezo electric vacuum inlet valve

    DOEpatents

    Keville, Robert F.; Dietrich, Daniel D.

    1998-03-24

    A miniature piezo electric vacuum inlet valve having a fast pulse rate and is battery operated with variable flow capability. The low power (<1.6 watts), high pulse rate (<2 milliseconds), variable flow inlet valve is utilized for mass spectroscopic applications or other applications where pulsed or continuous flow conditions are needed. The inlet valve also has a very minimal dead volume of less than 0.01 std/cc. The valve can utilize, for example, a 12 Vdc input/750 Vdc, 3 mA output power supply compared to conventional piezo electric valves which require preloading of the crystal drive mechanism and 120 Vac, thus the valve of the present invention is smaller by a factor of three.

  6. Tappet arrangement for engine valve train

    SciTech Connect

    Ohmi, M.

    1987-01-20

    This patent describes a valve arrangement for an internal combustion engine comprising a cylinder head assembly, poppet valves supported by the cylinder head assembly at one side thereof for reciprocation between opened and closed positions, the valves being juxtaposed to each other, a camshaft, and a slidably supported tappets supported by the cylinder head assembly and each interposed between the camshaft and a respective one of the valves. The improvement described here comprises at least one of the tappets being non-circular in cross-sections taken perpendicular to its line of reciprocation and having a short dimension extending in the direction of the adjacent valves and a long dimension extending in the perpendicular direction. The distance between the valves is less than the long dimension.

  7. Valve operating mechanism for internal combustion engine

    SciTech Connect

    Inoue, K.; Nagahiro, K.; Ajiki, Y.; Katoh, M.

    1988-12-06

    This patent describes a valve operating mechanism of operating valves of an internal combustion engine, comprising: a camshaft rotatable in synchronism with rotation of the internal combustion engine and having an array of three cams each having a different cam profile and including a high-speed cam position at one end of the array; three cam followers held in sliding contact with the cams, respectively, for operating the valves according to the cam profiles of the cams; and means for selectively interconnecting and disconnecting the cam followers to operate the valves at different valve timings in different speed ranges of the internal combustion engine, the speed ranges including a high-speed range in which all of the valves are controlled by the cam profile of the high-speed cam.

  8. Mitral valve repair for ischemic mitral regurgitation.

    PubMed

    Mohebali, Jahan; Chen, Frederick Y

    2015-05-01

    Mitral valve repair for ischemic mitral valve regurgitation remains controversial. In moderate mitral regurgitation (MR), controversy exists whether revascularization alone will be adequate to restore native valve geometry or whether intervention on the valve (repair) should be performed concomitantly. When MR is severe, the need for valve intervention is not disputed. Rather, the controversy is whether repair versus replacement should be undertaken. In contrast to degenerative or myxomatous disease that directly affects leaflet integrity and morphology, ischemic FMR results from a distortion and dilation of native ventricular geometry that normally supports normal leaflet coaptation. To address this, the first and most crucial step in successful valve repair is placement of an undersized, complete remodeling annuloplasty ring to restore the annulus to its native geometry. The following article outlines the steps for repair of ischemic mitral regurgitation.

  9. Gear shift control mechanism

    SciTech Connect

    Janson, D.A.

    1987-03-10

    A gear shift control mechanism is described comprising: multiple shift rods directed substantially parallel to one another, each rod carrying a shift fork for axial movement; a shift lever supported for pivotal movement about a first axis directed parallel to the axes of the shift rods and for pivotal movement about a second axis directed substantially perpendicular to the axes of the shift rods. The lever is moveable about the first axis and the second axis into engagement with a selected shift fork; interlock means located on each lateral side of the shift lever and mounted for pivotal movement about the first axis for blocking engagement with the shift forks; detent means for holding the shift lever in multiple predetermined angular positions about the second axis; and spring means located on a lateral side of the shift lever and mounted for pivotal movement about the first axis into interference contact with the shift forks for producing a force tending to resiliently bias the shift lever out of engagement with the selected shift fork.

  10. Propellant actuated nuclear reactor steam depressurization valve

    DOEpatents

    Ehrke, Alan C.; Knepp, John B.; Skoda, George I.

    1992-01-01

    A nuclear fission reactor combined with a propellant actuated depressurization and/or water injection valve is disclosed. The depressurization valve releases pressure from a water cooled, steam producing nuclear reactor when required to insure the safety of the reactor. Depressurization of the reactor pressure vessel enables gravity feeding of supplementary coolant water through the water injection valve to the reactor pressure vessel to prevent damage to the fuel core.

  11. Watts Bar Lock Valve Model Study

    DTIC Science & Technology

    2013-08-01

    challenges. ERDC develops innovative solutions in civil and military engineering, geospatial sciences, water resources, and environmental sciences for the...stream of the valve, and cavitation potential for various valve openings. Design modifications to improve performance were to be recommended. The...with rod hoist: 740-ft upper pool, 692-ft CWSEL, 8.0-ft valve opening .......... 13  Figure 17. Chamber water -surface elevation vs. Hydraulic load

  12. Field Experience with Lock Culvert Valves

    DTIC Science & Technology

    2013-12-01

    factors pertaining to valves such as the hoist loads, cavitation parameter, and effects of venting. To reduce the surge in the navigation channel...2 min 15 sec, filling-and-emptying valve opening time) ensures that adequate air is drawn into the culvert to cushion the cavitation implosions...than originally thought. The top third of the valve skin plate was removed (Figure 3) and replaced. Evidence of cavitation damage, more common

  13. Improved valve and dash-pot assembly

    DOEpatents

    Chang, S.C.

    1985-04-23

    A dash-pot valve comprises a cylinder submerged in the fluid of a housing and have a piston attached to a plunger projecting into the path of closing movement of a pivotal valve member. A vortex chamber in said cylinder is provided with targentially directed inlets to generate vortex flow upon retraction of said plunger and effect increasing resistance against said piston to progressively retard the closing rate of said valve member toward its seat.

  14. Valve and dash-pot assembly

    DOEpatents

    Chang, Shih-Chih

    1986-01-01

    A dash-pot valve comprising a cylinder submerged in the fluid of a housing and having a piston attached to a plunger projecting into the path of closing movement of a pivotal valve member. A vortex chamber in said cylinder is provided with tangentially directed inlets to generate vortex flow upon retraction of said plunger and effect increasing resistance against said piston to progressively retard the closing rate of said valve member toward its seat.

  15. Check valve slam analysis in pumping station

    NASA Astrophysics Data System (ADS)

    Himr, D.; Habán, V.; Dokoupil, P.

    2016-03-01

    Pumping station supplies water for technological process. The check valve in the station was replaced with a new one. The regular test of black out discovered the high pressure pulsations accompanied with noticeable pipeline movement of discharge pipe. It was caused by late check valve closing, probably, when the back flow reached the highest possible velocity. This statement was supported with analysis of results of pressure measurement near the check valve and with a numerical simulation of the flow in the pipeline system.

  16. Bistable (latching) solenoid actuated propellant isolation valve

    NASA Technical Reports Server (NTRS)

    Wichmann, H.; Deboi, H. H.

    1979-01-01

    The design, fabrication, assembly and test of a development configuration bistable (latching) solenoid actuated propellant isolation valve suitable for the control hydrazine and liquid fluorine to an 800 pound thrust rocket engine is described. The valve features a balanced poppet, utilizing metal bellows, a hard poppet/seat interface and a flexure support system for the internal moving components. This support system eliminates sliding surfaces, thereby rendering the valve free of self generated particles.

  17. Double-reed exhaust valve engine

    DOEpatents

    Bennett, Charles L.

    2015-06-30

    An engine based on a reciprocating piston engine that extracts work from pressurized working fluid. The engine includes a double reed outlet valve for controlling the flow of low-pressure working fluid out of the engine. The double reed provides a stronger force resisting closure of the outlet valve than the force tending to open the outlet valve. The double reed valve enables engine operation at relatively higher torque and lower efficiency at low speed, with lower torque, but higher efficiency at high speed.

  18. Additively Manufactured Main Fuel Valve Housing

    NASA Technical Reports Server (NTRS)

    Eddleman, David; Richard, Jim

    2015-01-01

    Selective Laser Melting (SLM) was utilized to fabricate a liquid hydrogen valve housing typical of those found in rocket engines and main propulsion systems. The SLM process allowed for a valve geometry that would be difficult, if not impossible to fabricate by traditional means. Several valve bodies were built by different SLM suppliers and assembled with valve internals. The assemblies were then tested with liquid nitrogen and operated as desired. One unit was also burst tested and sectioned for materials analysis. The design, test results, and planned testing are presented herein.

  19. Current Status of Prosthetic Cardiac Valves

    PubMed Central

    Huse, Wilfred M.; Wareham, Ellsworth E.

    1967-01-01

    The majority of patients with acquired valvular heart disease have severe damage to valves which is not amenable to repair but can now be treated by valve replacement with an acceptable mortality and morbidity. The caged ball or disc valve is widely used and is proving clinically satisfactory for cardiac valve replacement. Thromboembolism is the significant complication. With improvement in technique the incidence of infection, detachment and other complications has been reduced. ImagesFigure 1.Figure 2.Figure 4.Figure 5.Figure 6.Figure 7.Figure 8.Figure 9.Figure 10. PMID:6039188

  20. Electrically Controlled Valve With Small Motor

    NASA Technical Reports Server (NTRS)

    Reinicke, Robert H.; Mohtar, Rafic; Nelson, Richard O.

    1992-01-01

    Design of electrically controlled valve exploits force-multiplying principle to overcome large back-pressure force resisting initial opening. Design makes possible to open valve by use of relatively small motor adequate for rest of valve motion, but otherwise not large enough to open valve. In simple linear lifting, small horizontal forces applied to pair of taut cables to lift large weight through short distance. In rotary lifting, similar effect achieved by rotating, about an axis, disk to which initially axial cables attached.

  1. Matching flow characteristics of standard shutoff valves eliminates need for custom fabricated valves

    NASA Technical Reports Server (NTRS)

    Bevan, A. F.

    1966-01-01

    Standard high pressure valves are used in low pressure fluid system testing when a substantial system pressure increase is required. The flow-vs-valve stroke is matched with that of the valves being replaced. Some correction to the plug contour may be necessary.

  2. Acute tricuspid valve obstruction following the use of tricuspid ball valve prosthesis

    PubMed Central

    Samaan, H. A.; Murali, R.

    1970-01-01

    A case is presented in which the mitral and tricuspid valves were replaced by a ball-valve prosthesis. The patient was admitted as an emergency 18 months later with the clinical picture of acute venous inflow obstruction to the heart due to tricuspid ball-valve prosthesis obstruction. Successful replacement under emergency open heart surgery, using assisted circulation, is described. Images PMID:5452288

  3. Simultaneous transapical transcatheter aortic valve replacement and transcatheter mitral valve replacement for native valvular stenosis.

    PubMed

    Elkharbotly, Ali; Delago, Augustin; El-Hajjar, Mohammad

    2016-06-01

    Transcatheter aortic valve replacement (TAVR) is well established for patients who cannot undergo surgery (Leon et al., N Engl J Med 2010;363:1597) or are high risk for surgery (Smith et al., N Engl J Med 2011;364:2187-2198). Experience with the TAVR procedure has led to recent reports of successful transcatheter mitral valve replacement (TMVR) procedures (Cheung et al., J Am Coll Cardiol 2014;64:1814; Seiffert et al., J Am Coll Cardiol Interv 2012;5:341-349) separately or simultaneously with the TAVR. However, these reports were of simultaneous valve-in-valve procedures (Cheung Anson, et al. J Am Coll Cardiol 2013;61:1759-1766). A recent report from Portugal also reported simultaneous transpical implantation of an inverted transcatheter aortic valve-in-ring in the mitral position and transcatheter aortic valve (Hasan et al., Circulation 2013;128:e74-e76). There has been an experience of TMVR only in native mitral valve for mitral valve stenosis, but none in both aortic and mitral valves. We report the first in human case of simultaneous transapical TAVR and TMVR in native valves secondary to valvular stenosis. Our patient was not a candidate for percutaneous balloon mitral valvuloplasty secondary to a high Wilkins Score. Sizing of the aortic valve was based on the transesophageal echocardiogram (TEE), whereas sizing of the mitral valve was based on TEE measurements and balloon inflation during left ventriculography. © 2015 Wiley Periodicals, Inc.

  4. Ferrocyanide Safety Project: Subtask 3. 4, Aging Studies

    SciTech Connect

    Lilga, M.A.; Lumetta, M.R.; Riemath, W.F.; Romine, R.A.; Schiefelbein, G.F.

    1992-11-01

    The Hanford Ferrocyanide Task Team is addressing issues involving ferrocyanide precipitates in single-shell waste storage tanks (SSTs), in particular the storage of waste in a safe manner. This Task Team, composed of researchers from Westinghouse Hanford Company (WHC), Pacific Northwest Laboratory (PNL), and outside consultants, was formed in response to the need for an updated analysis of safety questions about the Hanford ferrocyanide tanks. This annual report gives the results of the work conducted by PNL in FY 1992 on Subtask 3.4, Aging Studies, which is part of Task 3, Chemical Nature of Feffocyanide in Wastes. Subtask 3.4 deals with the aging behavior and solubilization of ferrocyanide tank waste sludges in a basic aqueous environment. Investigated were the effects of pH variation, ionic strength, salts present in SSTS, and gamma radiation on solubilization of vendor-prepared Na[sub 2]NiFe(CN)[sub 6].

  5. Neurotoxicity of methamphetamine and 3,4-methylenedioxymethamphetamine.

    PubMed

    Halpin, Laura E; Collins, Stuart A; Yamamoto, Bryan K

    2014-02-27

    Amphetamines are a class of psychostimulant drugs that are widely abused for their stimulant, euphoric, empathogenic and hallucinogenic properties. Many of these effects result from acute increases in dopamine and serotonin neurotransmission. Subsequent to these acute effects, methamphetamine and 3,4 methylenedioxymethamphetamine (MDMA) produce persistent damage to dopamine and serotonin nerve terminals. This review summarizes the numerous interdependent mechanisms including excitotoxicity, mitochondrial damage and oxidative stress that have been demonstrated to contribute to this damage. Emerging non-neuronal mechanisms by which the drugs may contribute to monoaminergic terminal damage, as well as the neuropsychiatric consequences of this terminal damage are also presented. Methamphetamine and 3,4-methylenedioxymethamphetamine (MDMA) have similar chemical structures and pharmacologic properties compared to other abused substances including cathinone (khat), as well as a relatively new class of novel synthetic amphetamines known as 'bath salts' that have gained popularity among drug abusers.

  6. A monoclinic polymorph of KY(PO(3))(4).

    PubMed

    Horchani-Naifer, Karima; Jouini, Anis; Férid, Mokhtar

    2008-05-17

    The title compound, potassium yttrium polyphosphate, KY(PO(3))(4), was synthesized using the flux method. The atomic arrangement consists of an infinite long-chain polyphosphate organization. Chains, with a period of four PO(4) tetra-hedra, run along the a-axis direction. Two other polymorphs of this phosphate are known, in space groups P21/n and C2/c.

  7. A monoclinic polymorph of KY(PO3)4

    PubMed Central

    Horchani-Naifer, Karima; Jouini, Anis; Férid, Mokhtar

    2008-01-01

    The title compound, potassium yttrium polyphosphate, KY(PO3)4, was synthesized using the flux method. The atomic arrangement consists of an infinite long-chain polyphosphate organization. Chains, with a period of four PO4 tetra­hedra, run along the a-axis direction. Two other polymorphs of this phosphate are known, in space groups P21/n and C2/c. PMID:21202436

  8. All-metal valve structure for gas systems

    DOEpatents

    Baker, R.W.; Pawlak, D.A.; Ramey, A.J.

    1982-06-10

    A valve assembly with a resilient metal seat member is disclosed for providing a gas-tight seal in a gas handling system. The valve assembly also includes a valve element for sealing against the valve seat member; and an actuating means for operating the valve element. The valve seat member is a one-piece stainless steel ring having a central valve port and peripheral mounting flange, and an annular corrugation in between. A groove between the first and second ridges serves as a flexure zone during operation of the valve member and thus provides the seating pressure between the inner ridge or valve seat and the valve element. The outer annular ridge has a diameter less than said valve element to limit the seating motion of the valve element, preventing non-elastic deformation of the seat member.

  9. 30. Engine controls and valve gear, looking aft on main ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    30. Engine controls and valve gear, looking aft on main (promenade) deck level. Threaded admission valve lift rods (two at immediate left of chronometer) permit adjustment of valve timing in lower and upper admission valves of cylinder (left rod controls lower valve, right rod upper valve). Valve rods are lifted by jaw-like "wipers" during operation. Exhaust valve lift rods and wipers are located to right of chronometer. Crank at extreme right drives valve wiper shaft when engaged to end of eccentric rod, shown under "Crank Indicator" dial. Pair of handles to immediate left of admission valve rods control condenser water valves; handles to right of exhaust valve rods control feedwater flow to boilers from pumps. Gauges indicate boiler pressure (left) and condenser vacuum (right); "Crank Indicator" on wall aids engineer in keeping engine crank off "dead-center" at stop so that engine may be easily restarted. - Ferry TICONDEROGA, Route 7, Shelburne, Chittenden County, VT

  10. Hydraulic engine valve actuation system including independent feedback control

    DOEpatents

    Marriott, Craig D

    2013-06-04

    A hydraulic valve actuation assembly may include a housing, a piston, a supply control valve, a closing control valve, and an opening control valve. The housing may define a first fluid chamber, a second fluid chamber, and a third fluid chamber. The piston may be axially secured to an engine valve and located within the first, second and third fluid chambers. The supply control valve may control a hydraulic fluid supply to the piston. The closing control valve may be located between the supply control valve and the second fluid chamber and may control fluid flow from the second fluid chamber to the supply control valve. The opening control valve may be located between the supply control valve and the second fluid chamber and may control fluid flow from the supply control valve to the second fluid chamber.

  11. 49 CFR 179.400-19 - Valves and gages.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... the lading temperature. (1) Liquid control valves must be of extended stem design. (2) Packing, if... effectively seal the valve stem without causing difficulty of operation. (3) Each control valve and...

  12. APPROACH BRIDGE PORTION OF VALVE TOWER FOOT BRIDGE, AS SEEN ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    APPROACH BRIDGE PORTION OF VALVE TOWER FOOT BRIDGE, AS SEEN FROM BELOW, SHOWING VALVE TOWER TO RIGHT. VIEW FACING NORTH - Schofield Barracks Military Reservation, Ku Tree Reservoir, Valve Tower Foot Bridge, Kalakoa Stream, East Range, Wahiawa, Honolulu County, HI

  13. Uncertainty Quantification of Calculated Temperatures for the AGR 3/4 Experiment

    SciTech Connect

    Pham, Binh Thi-Cam

    2015-09-01

    A series of Advanced Gas Reactor (AGR) irradiation experiments are being conducted within the Advanced Reactor Technology (ART) Fuel Development and Qualification Program. The main objectives of the fuel experimental campaign are to provide the necessary data on fuel performance to support fuel process development, qualify a fuel design and fabrication process for normal operation and accident conditions, and support development and validation of fuel performance and fission product transport models and codes (PLN 3636, “Technical Program Plan for INL Advanced Reactor Technologies Technology Development Office/Advanced Gas Reactor Fuel Development and Qualification Program”). The AGR 3/4 test was inserted in the Northeast Flux Trap position in the Advanced Test Reactor (ATR) core at Idaho National Laboratory (INL) in December 2011 and successfully completed irradiation in mid-April 2014, resulting in irradiation of the tristructural isotropic (TRISO) fuel for 369.1 effective full-power days (EFPDs) during approximately 2.4 calendar years. The AGR 3/4 data, including the irradiation data and calculated results, were qualified and stored in the Nuclear Data Management and Analysis System (NDMAS). To support the U.S. TRISO fuel performance assessment and to provide data for validation of fuel performance and fission product transport models and codes, the daily as run thermal analysis has been performed separately on each of twelve AGR 3/4 capsules for the entire irradiation as discussed in ECAR-2807, “AGR 3/4 Daily As Run Thermal Analyses”. The ABAQUS code’s finite element-based thermal model predicts the daily average volume average (VA) fuel temperature (FT), peak FT, and graphite matrix, sleeve, and sink temperature in each capsule. The JMOCUP simulation codes were also created to perform depletion calculations for the AGR 3/4 experiment (ECAR-2753, “JMOCUP As-Run Daily Physics Depletion Calculation for the AGR 3/4 TRISO Particle Experiment in ATR

  14. Lock Culvert Valve Loss Coefficients. Hydraulic Laboratory Investigation.

    DTIC Science & Technology

    1981-09-01

    expansion on valve loss coefficients.,_ DO FORM M4 EDITION OF INOV 6S IS OBSOLETE Unclassified SECURITY CLASSIFICATION OF THIS PAGE (tan Data Entered) Ot...v 1 /2g where K = valve loss coefficient v AE = energy loss of the valve, ft V = average velocity in the culvert upstream from the valve, fps g...22g , to the head loss the total energy loss at the valve section, AE , was determined. The valve loss coefficient was then computed using Equation I

  15. Globe stability during simulated vitrectomy with valved and non-valved trocar cannulas

    PubMed Central

    Abulon, Dina Joy; Charles, Martin; Charles, Daniel E

    2015-01-01

    Purpose To compare the effects of valved and non-valved cannulas on intraocular pressure (IOP), fluid leakage, and vitreous incarceration during simulated vitrectomy. Methods Three-port pars plana incisions were generated in six rubber eyes using 23-, 25-, and 27-gauge valved and non-valved trocar cannulas. The models were filled with air and IOP was measured. Similar procedures were followed for 36 acrylic eyes filled with saline solution. Vitreous incarceration was analyzed in eleven rabbit and twelve porcine cadaver eyes. Results In the air-filled model, IOP loss was 89%–94% when two non-valved cannulas were unoccupied versus 1%–5% when two valved cannulas were unoccupied. In the fluid-filled model, with non-valved cannulas, IOP dropped while fluid leaked from the open ports. With two open ports, the IOP dropped to 20%–30% of set infusion pressure, regardless of infusion pressure and IOP compensation. The IOP was maintained in valved cannulas when one or two ports were left open, regardless of IOP compensation settings. There was no or minimal fluid leakage through open ports at any infusion pressure. Direct microscopic analysis of rabbit eyes showed that vitreous incarceration was significantly greater with 23-gauge non-valved than valved cannulas (P<0.005), and endoscopy of porcine eyes showed that vitreous incarceration was significantly greater with 23-gauge (P<0.05) and 27-gauge (P<0.05) non-valved cannulas. External observation of rabbit eyes showed vitreous prolapse through non-valved, but not valved, cannulas. Conclusion Valved cannulas surpassed non-valved cannulas in maintaining IOP, preventing fluid leakage, and reducing vitreous incarceration during simulated vitrectomy. PMID:26445520

  16. Beware of the B(e)all valve: mistaken valve identity, 30-year survival, and valve replacement.

    PubMed

    Topaz, On; Rutherford, Molly S; Mackey-Bojack, Shannon; Polkampally, Pritam R; Topaz, Allyne; Prinz, Andreas; Szentpetery, Szabolcs

    2010-01-01

    Effective management of patients after the implantation of mechanical cardiac valves includes correct recognition of each valve and its related complications. Herein, we present the case of a patient who had undergone implantation of a floating-disc Beall-Surgitool mitral valve in 1976 and developed multiple valve-related complications. Over 30 years and in multiple medical centers, the device was mistakenly assumed to be a "ball" valve. The correct identification of the prosthesis led to the recognition of valvular failure, and the patient underwent its replacement with an On-X bileaflet carbon valve. Pathologic and microscopic examination of the explanted Beall valve showed massive pannus formation that extended over the sewing cuff on the atrial and ventricular side, preventing complete disc closure; disrupted fabric coating of the sewing ring, with exposure of the underlying metal; and a marked inflammatory reaction. We report one of the longest intervals on record between the implantation and replacement of a Beall-Surgitool valve.

  17. Infective Endocarditis of the Aortic Valve with Anterior Mitral Valve Leaflet Aneurysm.

    PubMed

    Tomsic, Anton; Li, Wilson W L; van Paridon, Marieke; Bindraban, Navin R; de Mol, Bas A J M

    2016-08-01

    Mitral valve leaflet aneurysm is a rare and potentially devastating complication of aortic valve endocarditis. We report the case of a 48-year-old man who had endocarditis of the native aortic valve and a concomitant aneurysm of the anterior mitral valve leaflet. Severe mitral regurgitation occurred after the aneurysm perforated. The patient showed no signs of heart failure and completed a 6-week regimen of antibiotic therapy before undergoing successful aortic and mitral valve replacement. In addition to the patient's case, we review the relevant medical literature.

  18. (3R,4S)-3,4-Isopropylidenedioxy-5-phenylsulfonylmethyl-3,4-dihydro-2H-pyrrole 1-oxide

    PubMed Central

    Flores, Mari Fe; Garcia, P.; M. Garrido, Narciso; Sanz, Francisca; Diez, David

    2011-01-01

    The title compound, C14H17NO5S, was prepared by oxidation of (2R,3S,4R)-2-phenyl­sulfonyl­methyl-1-hy­droxy-3,4-iso­pro­pyl­idene­dioxy­pyrrolidine. Its crystal structure confirms unequivocally its configuration. Two inter­molecular C—H⋯O inter­actions help to establish the packing. PMID:21754431

  19. Cylinder valve packing nut studies

    SciTech Connect

    Blue, S.C.

    1991-12-31

    The design, manufacture, and use of cylinder valve packing nuts have been studied to improve their resistance to failure from stress corrosion cracking. Stress frozen photoelastic models have been analyzed to measure the stress concentrations at observed points of failure. The load effects induced by assembly torque and thermal expansion of stem packing were observed by strain gaging nuts. The effects of finishing operations and heat treatment were studied by the strain gage hole boring and X-ray methods. Modifications of manufacturing and operation practices are reducing the frequency of stress corrosion failures.

  20. 49 CFR 195.420 - Valve maintenance.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 3 2011-10-01 2011-10-01 false Valve maintenance. 195.420 Section 195.420 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY... PIPELINE Operation and Maintenance § 195.420 Valve maintenance. (a) Each operator shall maintain each...

  1. Fail-safe bidirectional valve driver

    NASA Technical Reports Server (NTRS)

    Fujimoto, H.

    1974-01-01

    Cross-coupled diodes are added to commonly used bidirectional valve driver circuit to protect circuit and power supply. Circuit may be used in systems requiring fail-safe bidirectional valve operation, particularly in chemical- and petroleum-processing control systems and computer-controlled hydraulic or pneumatic systems.

  2. Mitral valve disease—morphology and mechanisms

    PubMed Central

    Levine, Robert A.; Hagége, Albert A.; Judge, Daniel P.; Padala, Muralidhar; Dal-Bianco, Jacob P.; Aikawa, Elena; Beaudoin, Jonathan; Bischoff, Joyce; Bouatia-Naji, Nabila; Bruneval, Patrick; Butcher, Jonathan T.; Carpentier, Alain; Chaput, Miguel; Chester, Adrian H.; Clusel, Catherine; Delling, Francesca N.; Dietz, Harry C.; Dina, Christian; Durst, Ronen; Fernandez-Friera, Leticia; Handschumacher, Mark D.; Jensen, Morten O.; Jeunemaitre, Xavier P.; Le Marec, Hervé; Le Tourneau, Thierry; Markwald, Roger R.; Mérot, Jean; Messas, Emmanuel; Milan, David P.; Neri, Tui; Norris, Russell A.; Peal, David; Perrocheau, Maelle; Probst, Vincent; Pucéat, Michael; Rosenthal, Nadia; Solis, Jorge; Schott, Jean-Jacques; Schwammenthal, Ehud; Slaugenhaupt, Susan A.; Song, Jae-Kwan; Yacoub, Magdi H.

    2016-01-01

    Mitral valve disease is a frequent cause of heart failure and death. Emerging evidence indicates that the mitral valve is not a passive structure, but—even in adult life—remains dynamic and accessible for treatment. This concept motivates efforts to reduce the clinical progression of mitral valve disease through early detection and modification of underlying mechanisms. Discoveries of genetic mutations causing mitral valve elongation and prolapse have revealed that growth factor signalling and cell migration pathways are regulated by structural molecules in ways that can be modified to limit progression from developmental defects to valve degeneration with clinical complications. Mitral valve enlargement can determine left ventricular outflow tract obstruction in hypertrophic cardiomyopathy, and might be stimulated by potentially modifiable biological valvular–ventricular interactions. Mitral valve plasticity also allows adaptive growth in response to ventricular remodelling. However, adverse cellular and mechanobiological processes create relative leaflet deficiency in the ischaemic setting, leading to mitral regurgitation with increased heart failure and mortality. Our approach, which bridges clinicians and basic scientists, enables the correlation of observed disease with cellular and molecular mechanisms, leading to the discovery of new opportunities for improving the natural history of mitral valve disease. PMID:26483167

  3. Ferrofluid Would Seal Linear-Motion Valve

    NASA Technical Reports Server (NTRS)

    Chandler, J. A.

    1983-01-01

    Proposed valve employs ferrofluid to make tight seal. Seal requires no precisely machined parts, and hand lapping of valve seats are unnecessary. Magnetic fluid fills gap between shaft and annular pole piece in chamber wall. Precise shaft fit is not necessary.

  4. Mitral valve disease--morphology and mechanisms.

    PubMed

    Levine, Robert A; Hagége, Albert A; Judge, Daniel P; Padala, Muralidhar; Dal-Bianco, Jacob P; Aikawa, Elena; Beaudoin, Jonathan; Bischoff, Joyce; Bouatia-Naji, Nabila; Bruneval, Patrick; Butcher, Jonathan T; Carpentier, Alain; Chaput, Miguel; Chester, Adrian H; Clusel, Catherine; Delling, Francesca N; Dietz, Harry C; Dina, Christian; Durst, Ronen; Fernandez-Friera, Leticia; Handschumacher, Mark D; Jensen, Morten O; Jeunemaitre, Xavier P; Le Marec, Hervé; Le Tourneau, Thierry; Markwald, Roger R; Mérot, Jean; Messas, Emmanuel; Milan, David P; Neri, Tui; Norris, Russell A; Peal, David; Perrocheau, Maelle; Probst, Vincent; Pucéat, Michael; Rosenthal, Nadia; Solis, Jorge; Schott, Jean-Jacques; Schwammenthal, Ehud; Slaugenhaupt, Susan A; Song, Jae-Kwan; Yacoub, Magdi H

    2015-12-01

    Mitral valve disease is a frequent cause of heart failure and death. Emerging evidence indicates that the mitral valve is not a passive structure, but--even in adult life--remains dynamic and accessible for treatment. This concept motivates efforts to reduce the clinical progression of mitral valve disease through early detection and modification of underlying mechanisms. Discoveries of genetic mutations causing mitral valve elongation and prolapse have revealed that growth factor signalling and cell migration pathways are regulated by structural molecules in ways that can be modified to limit progression from developmental defects to valve degeneration with clinical complications. Mitral valve enlargement can determine left ventricular outflow tract obstruction in hypertrophic cardiomyopathy, and might be stimulated by potentially modifiable biological valvular-ventricular interactions. Mitral valve plasticity also allows adaptive growth in response to ventricular remodelling. However, adverse cellular and mechanobiological processes create relative leaflet deficiency in the ischaemic setting, leading to mitral regurgitation with increased heart failure and mortality. Our approach, which bridges clinicians and basic scientists, enables the correlation of observed disease with cellular and molecular mechanisms, leading to the discovery of new opportunities for improving the natural history of mitral valve disease.

  5. Minimally Invasive Mitral Valve Surgery I

    PubMed Central

    Ailawadi, Gorav; Agnihotri, Arvind K.; Mehall, John R.; Wolfe, J. Alan; Hummel, Brian W.; Fayers, Trevor M.; Farivar, R. Saeid; Grossi, Eugene A.; Guy, T. Sloane; Hargrove, W. Clark; Khan, Junaid H.; Lehr, Eric J.; Malaisrie, S. Chris; Murphy, Douglas A.; Rodriguez, Evelio; Ryan, William H.; Salemi, Arash; Segurola, Romualdo J.; Shemin, Richard J.; Smith, J. Michael; Smith, Robert L.; Weldner, Paul W.; Goldman, Scott M.; Lewis, Clifton T. P.; Barnhart, Glenn R.

    2016-01-01

    Abstract Widespread adoption of minimally invasive mitral valve repair and replacement may be fostered by practice consensus and standardization. This expert opinion, first of a 3-part series, outlines current best practices in patient evaluation and selection for minimally invasive mitral valve procedures, and discusses preoperative planning for cannulation and myocardial protection. PMID:27654407

  6. 46 CFR 108.444 - Lockout valves.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... Fire Extinguishing Systems Fixed Carbon Dioxide Fire Extinguishing Systems § 108.444 Lockout valves. (a) A lockout valve must be provided on any carbon dioxide extinguishing system protecting a space over... complete isolation of the system from the protected space or spaces, making it impossible for...

  7. High precision high flow range control valve

    DOEpatents

    McCray, J.A.

    1999-07-13

    A fluid control valve is described having a valve housing having first and second valve housing openings for the ingress and egress of fluid through the control valve. Disposed within a void formed by the control valve is a sleeve having at least one sleeve opening to permit the flow of fluid therethrough. A flow restricter travels within the sleeve to progressively block off the sleeve opening and thereby control flow. A fluid passageway is formed between the first valve housing opening and the outer surface of the sleeve. A second fluid passageway is formed between the inside of the sleeve and the second valve housing opening. Neither fluid passageway contains more than one 90 [degree] turn. In the preferred embodiment only one of the two fluid passageways contains a 90[degree] turn. In another embodiment, the control valve housing is bifurcated by a control surface having control surface opening disposed therethrough. A flow restricter is in slidable contact with the control surface to restrict flow of fluid through the control surface openings. 12 figs.

  8. High precision high flow range control valve

    DOEpatents

    McCray, John A.

    1999-01-01

    A fluid control valve is described having a valve housing having first and second valve housing openings for the ingress and egress of fluid through the control valve. Disposed within a void formed by the control valve is a sleeve having at least one sleeve opening to permit the flow of fluid therethrough. A flow restricter travels within the sleeve to progressively block off the sleeve opening and thereby control flow. A fluid passageway is formed between the first valve housing opening and the outer surface of the sleeve. A second fluid passageway is formed between the inside of the sleeve and the second valve housing opening. Neither fluid passageway contains more than one 90.degree. turn. In the preferred embodiment only one of the two fluid passageways contains a 90.degree. turn. In another embodiment, the control valve housing is bifurcated by a control surface having control surface opening disposed therethrough. A flow restricter is in slidable contact with the control surface to restrict flow of fluid through the control surface openings.

  9. Aortic Valve Calcification in Mild Primary Hyperparathyroidism

    PubMed Central

    Iwata, Shinichi; Walker, Marcella Donovan; Di Tullio, Marco R.; Hyodo, Eiichi; Jin, Zhezhen; Liu, Rui; Sacco, Ralph L.; Homma, Shunichi

    2012-01-01

    Context: It is unclear whether cardiovascular disease is present in primary hyperparathyroidism (PHPT). Objective: Aortic valve structure and function were compared in PHPT patients and population-based controls. Design: This is a case-control study. Setting: The study was conducted in a university hospital metabolic bone disease unit. Participants: We studied 51 patients with PHPT and 49 controls. Outcome Measures: We measured the aortic valve calcification area and the transaortic pressure gradient. Results: Aortic valve calcification area was significantly higher in PHPT (0.24 ± 0.02 vs. 0.17 ± 0.02 cm2, p<0.01), although there was no difference in the peak transaortic pressure gradient, a functional measure of valvular calcification (5.6 ± 0.3 vs. 6.0 ± 0.3 mm Hg, P = 0.39). Aortic valve calcification area was positively associated with PTH (r = 0.34; P < 0.05) but not with serum calcium, phosphorus, or 25-hydroxyvitamin D levels or with calcium-phosphate product. Serum PTH level remained an independent predictor of aortic valve calcification area after adjustment for age, sex, body mass index, smoking status, history of hypercholesterolemia and hypertension, and estimated glomerular filtration rate. Conclusions: Mild PHPT is associated with subclinical aortic valve calcification. PTH, but not serum calcium concentration, predicted aortic valve calcification. PTH was a more important predictor of aortic valve calcification than well-accepted cardiovascular risk factors. PMID:22031523

  10. Whole Teflon valves for handling droplets.

    PubMed

    Cybulski, Olgierd; Jakiela, Slawomir; Garstecki, Piotr

    2016-06-21

    We propose and test a new whole-Teflon gate valve for handling droplets. The valve allows droplet plugs to pass through without disturbing them. This is possible due to the geometric design, the choice of material and lack of any pulses of flow generated by closing or opening the valve. The duct through the valve resembles a simple segment of tubing, without constrictions, change in lumen or side pockets. There are no extra sealing materials with different wettability or chemical resistance. The only material exposed to liquids is FEP Teflon, which is resistant to aggressive chemicals and fully biocompatible. The valve can be integrated into microfluidic systems: we demonstrate a complex system for culturing bacteria in hundreds of microliter droplet chemostats. The valve effectively isolates modules of the system to increase precision of operations on droplets. We verified that the valve allowed millions of droplet plugs to safely pass through, without any cross-contamination with bacteria between the droplets. The valve can be used in automating complex microfluidic systems for experiments in biochemistry, biology and organic chemistry.

  11. Rubber valve seal with tough skin

    NASA Technical Reports Server (NTRS)

    Martin, J. W.

    1979-01-01

    Curing technique for producing variable viscosity seal has hard sealing surface supported by softer rubber. Valve seal is clamped between two jaws for curing with hotter jaw at temperature of approximately 350 F and lower at room temperature. Result is durable tight valve-seat.

  12. 14 CFR 121.235 - Fuel valves.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 3 2011-01-01 2011-01-01 false Fuel valves. 121.235 Section 121.235 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIR CARRIERS..., FLAG, AND SUPPLEMENTAL OPERATIONS Special Airworthiness Requirements § 121.235 Fuel valves. Each...

  13. 14 CFR 121.235 - Fuel valves.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 3 2013-01-01 2013-01-01 false Fuel valves. 121.235 Section 121.235 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIR CARRIERS..., FLAG, AND SUPPLEMENTAL OPERATIONS Special Airworthiness Requirements § 121.235 Fuel valves. Each...

  14. 14 CFR 121.235 - Fuel valves.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 3 2012-01-01 2012-01-01 false Fuel valves. 121.235 Section 121.235 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIR CARRIERS..., FLAG, AND SUPPLEMENTAL OPERATIONS Special Airworthiness Requirements § 121.235 Fuel valves. Each...

  15. 14 CFR 121.235 - Fuel valves.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 3 2014-01-01 2014-01-01 false Fuel valves. 121.235 Section 121.235 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIR CARRIERS..., FLAG, AND SUPPLEMENTAL OPERATIONS Special Airworthiness Requirements § 121.235 Fuel valves. Each...

  16. 14 CFR 121.235 - Fuel valves.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Fuel valves. 121.235 Section 121.235 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIR CARRIERS..., FLAG, AND SUPPLEMENTAL OPERATIONS Special Airworthiness Requirements § 121.235 Fuel valves. Each...

  17. 49 CFR 229.109 - Safety valves.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ..., DEPARTMENT OF TRANSPORTATION RAILROAD LOCOMOTIVE SAFETY STANDARDS Safety Requirements Steam Generators § 229.109 Safety valves. Every steam generator shall be equipped with at least two safety valves that have a... as closely to the separator as possible without discharging inside of the generator compartment....

  18. 46 CFR 64.67 - Shutoff valve.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Shutoff valve. 64.67 Section 64.67 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING MARINE PORTABLE TANKS AND CARGO HANDLING SYSTEMS Pressure Relief Devices and Vacuum Relief Devices for MPTs § 64.67 Shutoff valve. A shutoff...

  19. 46 CFR 64.67 - Shutoff valve.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 2 2014-10-01 2014-10-01 false Shutoff valve. 64.67 Section 64.67 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING MARINE PORTABLE TANKS AND CARGO HANDLING SYSTEMS Pressure Relief Devices and Vacuum Relief Devices for MPTs § 64.67 Shutoff valve. A shutoff...

  20. 46 CFR 64.67 - Shutoff valve.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 2 2011-10-01 2011-10-01 false Shutoff valve. 64.67 Section 64.67 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING MARINE PORTABLE TANKS AND CARGO HANDLING SYSTEMS Pressure Relief Devices and Vacuum Relief Devices for MPTs § 64.67 Shutoff valve. A shutoff...