Science.gov

Sample records for 3-month blanking period

  1. Testing the Reliability of Delay Discounting of Ten Commodities Using the Fill-in-the-Blank Method

    ERIC Educational Resources Information Center

    Weatherly, Jeffrey N.; Derenne, Adam; Terrell, Heather K.

    2011-01-01

    Several measures of delay discounting have been shown to be reliable over periods of up to 3 months. In the present study, 115 participants completed a fill-in-the-blank (FITB) delay-discounting task on sets of 5 different commodities, 12 weeks apart. Results showed that discounting rates were not well described by a hyperbolic function but were…

  2. Modified blank ammunition injuries.

    PubMed

    Ogunc, Gokhan I; Ozer, M Tahir; Coskun, Kagan; Uzar, Ali Ihsan

    2009-12-15

    Blank firing weapons are designed only for discharging blank ammunition cartridges. Because they are cost-effective, are easily accessible and can be modified to live firearms plus their unclear legal situation in Turkish Law makes them very popular in Turkey. 2004 through 2008, a total of 1115 modified blank weapons were seized in Turkey. Blank firing weapons are easily modified by owners, making them suitable for discharging live firearm ammunition or modified blank ammunitions. Two common methods are used for modification of blank weapons. After the modification, these weapons can discharge the live ammunition. However, due to compositional durability problems with these types of weapons; the main trend is to use the modified blank ammunitions rather than live firearm ammunition fired from modified blank firing weapons. In this study, two types of modified blank weapons and two types of modified blank cartridges were tested on three different target models. Each of the models' shooting side was coated with 1.3+/-2 mm thickness chrome tanned cowhide as a skin simulant. The first model was only coated with skin simulant. The second model was coated with skin simulant and 100% cotton police shirt. The third model was coated with skin simulant and jean denim. After the literature evaluation four high risky anatomic locations (the neck area; the eyes; the thorax area and inguinal area) were pointed out for the steel and lead projectiles are discharged from the modified blank weapons especially in close range (0-50 cm). The target models were designed for these anatomic locations. For the target models six Transparent Ballistic Candle blocks (TCB) were prepared and divided into two test groups. The first group tests were performed with lead projectiles and second group with steel projectile. The shortest penetration depth (lead projectile: 4.358 cm; steel projectile 8.032 cm) was recorded in the skin simulant and jean denim coated block for both groups. In both groups

  3. Modified blank ammunition injuries.

    PubMed

    Ogunc, Gokhan I; Ozer, M Tahir; Coskun, Kagan; Uzar, Ali Ihsan

    2009-12-15

    Blank firing weapons are designed only for discharging blank ammunition cartridges. Because they are cost-effective, are easily accessible and can be modified to live firearms plus their unclear legal situation in Turkish Law makes them very popular in Turkey. 2004 through 2008, a total of 1115 modified blank weapons were seized in Turkey. Blank firing weapons are easily modified by owners, making them suitable for discharging live firearm ammunition or modified blank ammunitions. Two common methods are used for modification of blank weapons. After the modification, these weapons can discharge the live ammunition. However, due to compositional durability problems with these types of weapons; the main trend is to use the modified blank ammunitions rather than live firearm ammunition fired from modified blank firing weapons. In this study, two types of modified blank weapons and two types of modified blank cartridges were tested on three different target models. Each of the models' shooting side was coated with 1.3+/-2 mm thickness chrome tanned cowhide as a skin simulant. The first model was only coated with skin simulant. The second model was coated with skin simulant and 100% cotton police shirt. The third model was coated with skin simulant and jean denim. After the literature evaluation four high risky anatomic locations (the neck area; the eyes; the thorax area and inguinal area) were pointed out for the steel and lead projectiles are discharged from the modified blank weapons especially in close range (0-50 cm). The target models were designed for these anatomic locations. For the target models six Transparent Ballistic Candle blocks (TCB) were prepared and divided into two test groups. The first group tests were performed with lead projectiles and second group with steel projectile. The shortest penetration depth (lead projectile: 4.358 cm; steel projectile 8.032 cm) was recorded in the skin simulant and jean denim coated block for both groups. In both groups

  4. Photomultiplier blanking circuit

    NASA Technical Reports Server (NTRS)

    Mcclenahan, J. O.

    1972-01-01

    Circuit for protecting photomultiplier equipment from current surges which occur when exposed to brilliant illumination is discussed. Components of circuit and details of operation are provided. Circuit diagram to show action of blanking pulse on zener diode is included.

  5. EUVL Mask Blank Repair

    SciTech Connect

    Barty, A; Mirkarimi, P; Stearns, D G; Sweeney, D; Chapman, H N; Clift, M; Hector, S; Yi, M

    2002-05-22

    EUV mask blanks are fabricated by depositing a reflective Mo/Si multilayer film onto super-polished substrates. Small defects in this thin film coating can significantly alter the reflected field and introduce defects in the printed image. Ideally one would want to produce defect-free mask blanks; however, this may be very difficult to achieve in practice. One practical way to increase the yield of mask blanks is to effectively repair multilayer defects, and to this effect they present two complementary defect repair strategies for use on multilayer-coated EUVL mask blanks. A defect is any area on the mask which causes unwanted variations in EUV dose in the aerial image obtained in a printing tool, and defect repair is correspondingly defined as any strategy that renders a defect unprintable during exposure. The term defect mitigation can be adopted to describe any strategy which renders a critical defect non-critical when printed, and in this regard a non-critical defect is one that does not adversely affect device function. Defects in the patterned absorber layer consist of regions where metal, typically chrome, is unintentionally added or removed from the pattern leading to errors in the reflected field. There currently exists a mature technology based on ion beam milling and ion beam assisted deposition for repairing defects in the absorber layer of transmission lithography masks, and it is reasonable to expect that this technology will be extended to the repair of absorber defects in EUVL masks. However, techniques designed for the repair of absorber layers can not be directly applied to the repair of defects in the mask blank, and in particular the multilayer film. In this paper they present for the first time a new technique for the repair of amplitude defects as well as recent results on the repair of phase defects.

  6. Mask Blank Defect Detection

    SciTech Connect

    Johnson, M A; Sommargren, G E

    2000-02-04

    Mask blanks are the substrates that hold the master patterns for integrated circuits. Integrated circuits are semiconductor devices, such as microprocessors (mPs), dynamic random access memory (DRAMs), and application specific integrated circuits (ASICs) that are central to the computer, communication, and electronics industries. These devices are fabricated using a set of master patterns that are sequentially imaged onto light-sensitive coated silicon wafers and processed to form thin layers of insulating and conductive materials on top of the wafer. These materials form electrical paths and transistors that control the flow of electricity through the device. For the past forty years the semiconductor industry has made phenomenal improvements in device functionality, compactness, speed, power, and cost. This progress is principally due to the exponential decrease in the minimum feature size of integrated circuits, which has been reduced by a factor of {radical}2 every three years. Since 1992 the Semiconductor Industry Association (SIA) has coordinated the efforts of producing a technology roadmap for semiconductors. In the latest document, ''The International Technology Roadmap for Semiconductors: 1999'', future technology nodes (minimum feature sizes) and targeted dates were specified and are summarized in Table 1. Lithography is the imaging technology for producing a de-magnified image of the mask on the wafer. A typical de-magnification factor is 4. Mask blank defects as small as one-eighth the equivalent minimum feature size are printable and may cause device failure. Defects might be the result of the surface preparation, such as polishing, or contamination due to handling or the environment. Table 2 shows the maximum tolerable defect sizes on the mask blank for each technology node. This downward trend puts a tremendous burden on mask fabrication, particularly in the area of defect detection and reduction. A new infrastructure for mask inspection will be

  7. 9 CFR 206.3 - Monthly report.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... STOCKYARDS PROGRAMS), DEPARTMENT OF AGRICULTURE SWINE CONTRACT LIBRARY § 206.3 Monthly report. (a) Do I need... reported on Form P&SP-341, which will be available on the Internet on the GIPSA Web site (http://www.gipsa... to submit information electronically, contact GIPSA through the Internet on the GIPSA Web site...

  8. 9 CFR 206.3 - Monthly report.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... STOCKYARDS PROGRAMS), DEPARTMENT OF AGRICULTURE SWINE CONTRACT LIBRARY § 206.3 Monthly report. (a) Do I need... will be available on the Internet on the GIPSA Web site (http://www.usda.gov/gipsa/) and at USDA GIPSA... GIPSA through the Internet on the GIPSA Web site (http://www.usda.gov/gipsa/) or at USDA GIPSA,...

  9. 9 CFR 206.3 - Monthly report.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... STOCKYARDS PROGRAMS), DEPARTMENT OF AGRICULTURE SWINE CONTRACT LIBRARY § 206.3 Monthly report. (a) Do I need... reported on Form P&SP-341, which will be available on the Internet on the GIPSA Web site (http://www.gipsa... to submit information electronically, contact GIPSA through the Internet on the GIPSA Web site...

  10. 9 CFR 206.3 - Monthly report.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... STOCKYARDS PROGRAMS), DEPARTMENT OF AGRICULTURE SWINE CONTRACT LIBRARY § 206.3 Monthly report. (a) Do I need... reported on Form P&SP-341, which will be available on the Internet on the GIPSA Web site (http://www.gipsa... to submit information electronically, contact GIPSA through the Internet on the GIPSA Web site...

  11. 9 CFR 206.3 - Monthly report.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... STOCKYARDS PROGRAMS), DEPARTMENT OF AGRICULTURE SWINE CONTRACT LIBRARY § 206.3 Monthly report. (a) Do I need... reported on Form P&SP-341, which will be available on the Internet on the GIPSA Web site (http://www.gipsa... to submit information electronically, contact GIPSA through the Internet on the GIPSA Web site...

  12. Feeding Your 1- to 3-Month-Old

    MedlinePlus

    ... About Zika & Pregnancy Feeding Your 1- to 3-Month-Old KidsHealth > For Parents > Feeding Your 1- to 3-Month-Old Print A A A Text Size What's ... About Spitting Up During your baby's first 3 months, breast milk or formula will provide all the ...

  13. 7 CFR 201.35 - Blank spaces.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 3 2011-01-01 2011-01-01 false Blank spaces. 201.35 Section 201.35 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards... REGULATIONS Labeling in General § 201.35 Blank spaces. Blank spaces on the label shall be deemed to imply...

  14. 7 CFR 201.35 - Blank spaces.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Blank spaces. 201.35 Section 201.35 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards... REGULATIONS Labeling in General § 201.35 Blank spaces. Blank spaces on the label shall be deemed to imply...

  15. 7 CFR 201.35 - Blank spaces.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 3 2014-01-01 2014-01-01 false Blank spaces. 201.35 Section 201.35 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards... REGULATIONS Labeling in General § 201.35 Blank spaces. Blank spaces on the label shall be deemed to imply...

  16. 7 CFR 201.35 - Blank spaces.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 3 2013-01-01 2013-01-01 false Blank spaces. 201.35 Section 201.35 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards... REGULATIONS Labeling in General § 201.35 Blank spaces. Blank spaces on the label shall be deemed to imply...

  17. 7 CFR 201.35 - Blank spaces.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 3 2012-01-01 2012-01-01 false Blank spaces. 201.35 Section 201.35 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards... REGULATIONS Labeling in General § 201.35 Blank spaces. Blank spaces on the label shall be deemed to imply...

  18. Medical Care and Your 1- to 3-Month-Old

    MedlinePlus

    ... Pregnancy Medical Care and Your 1- to 3-Month-Old KidsHealth > For Parents > Medical Care and Your 1- to 3-Month-Old Print A A A Text Size What's ... When to Call the Doctor During these early months, you may have many questions about your baby's ...

  19. Learning, Play, and Your 1- to 3-Month-Old

    MedlinePlus

    ... Pregnancy Learning, Play, and Your 1- to 3-Month-Old KidsHealth > For Parents > Learning, Play, and Your 1- to 3-Month-Old Print A A A Text Size What's ... start responding even more to you during these months — and will even give you a smile! Babies ...

  20. Deformed ellipsoidal diffraction grating blank

    NASA Technical Reports Server (NTRS)

    Decew, Alan E., Jr.

    1994-01-01

    The Deformed Ellipsoidal Grating Blank (DEGB) is the primary component in an ultraviolet spectrometer. Since one of the major concerns for these instruments is throughput, significant efforts are made to reduce the number of components and subsequently reflections. Each reflection results in losses through absorption and scattering. It is these two sources of photon loss that dictated the requirements for the DEGB. The first goal is to shape the DEGB in such a way that the energy at the entrance slit is focused as well as possible on the exit slit. The second goal is to produce a surface smooth enough to minimize the photon loss due to scattering. The program was accomplished in three phases. The first phase was the fabrication planning. The second phase was the actual fabrication and initial testing. The last phase was the final testing of the completed DEGB.

  1. Repairing native defects on EUV mask blanks

    NASA Astrophysics Data System (ADS)

    Lawliss, Mark; Gallagher, Emily; Hibbs, Michael; Seki, Kazunori; Isogawa, Takeshi; Robinson, Tod; LeClaire, Jeff

    2014-10-01

    Mask defectivity is a serious problem for all lithographic masks, but especially for EUV masks. Defects in the EUV blank are particularly challenging because their elimination is beyond control of the mask fab. If defects have been identified on a mask blank, patterns can be shifted to place as many blank defects as possible in regions where printing impact will be eliminated or become unimportant. For those defects that cannot be mitigated through pattern shift, repair strategies must be developed. Repairing defects that occur naturally in the EUV blank is challenging because the printability of these defects varies widely. This paper describes some types of native defects commonly found and begins to outline a triage strategy for defects that are identified on the blank. Sample defects best suited to nanomachining repair are treated in detail: repairs are attempted, characterized using mask metrology and then tested for printability. Based on the initial results, the viability of repairing EUV blank native defects is discussed.

  2. Advances in Low-Defect Multilayers for EUVL Mask Blanks

    SciTech Connect

    Folta, J A; Davidson, J C; Larson, C C; Walton, C C; Kearney, P A

    2002-04-15

    Low-defect multilayer coatings are required to fabricate mask blanks for Extreme Ultraviolet Lithography (EUVL). The mask blanks consist of high reflectance E W multilayers on low thermal expansion substrates. A defect density of 0.0025 printable defects/cm{sup 2} for both the mask substrate and the multilayer is required to provide a mask blank yield of 60%. Current low defect multilayer coating technology allows repeated coating-added defect levels of 0.05/cm{sup 2} for defects greater than 90 nm polystyrene latex sphere (PSL) equivalent size for lots of 20 substrates. Extended clean operation of the coating system at levels below 0.08/cm{sup 2} for 3 months of operation has also been achieved. Two substrates with zero added defects in the quality area have been fabricated, providing an existence proof that ultra low defect coatings are possible. Increasing the ion source-to-target distance from 410 to 560 mm to reduce undesired coating of the ion source caused the defect density to increase to 0.2/cm{sup 2}. Deposition and etching diagnostic witness substrates and deposition pinhole cameras showed a much higher level of ion beam spillover (ions missing the sputter target) than expected. Future work will quantify beam spillover, and test designs to reduce spillover, if it is confirmed to be the cause of the increased defect level. The LDD system will also be upgraded to allow clean coating of standard format mask substrates. The upgrade will confirm that the low defect process developed on Si wafers is compatible with the standard mask format 152 mm square substrates, and will provide a clean supply of EUVL mask blanks needed to support development of EUVL mask patterning processes and clean mask handling technologies.

  3. Senses and Your 1- to 3-Month-Old

    MedlinePlus

    ... enjoy listening to music (play a variety of styles) and may be fascinated by the routine sounds ... Parents MORE ON THIS TOPIC Your Child's Vision Communication and Your 1- to 3-Month-Old Feeding ...

  4. Inspection of lithographic mask blanks for defects

    DOEpatents

    Sommargren, Gary E.

    2001-01-01

    A visible light method for detecting sub-100 nm size defects on mask blanks used for lithography. By using optical heterodyne techniques, detection of the scattered light can be significantly enhanced as compared to standard intensity detection methods. The invention is useful in the inspection of super-polished surfaces for isolated surface defects or particulate contamination and in the inspection of lithographic mask or reticle blanks for surface defects or bulk defects or for surface particulate contamination.

  5. Latent Learning and Deferred Imitation at 3 Months

    ERIC Educational Resources Information Center

    Campanella, Jennifer; Rovee-Collier, Carolyn

    2005-01-01

    Young infants spend most of their waking time looking around, but whether they learn anything about what they see is unknown. We used a sensory preconditioning paradigm and a deferred imitation task to assess if 3-month-olds formed a latent association between 2 objects (S[subscript 1], S[subscript 2]) that they merely saw together. Because…

  6. Emotional and Social Development: Birth to 3 Months

    MedlinePlus

    ... Share Emotional and Social Development: Birth to 3 Months Page Content Article Body By the second month, your baby will spend much of each day ... he can smile, too. Even during his first month, he’ll experiment with primitive grins and grimaces. ...

  7. Complete transurethral bladder eversion 3 months after hemipelvectomy.

    PubMed

    Lowe, Gregory; Mandalapu, Subbarao; Gilleran, Jason

    2010-02-01

    A 46-year-old white female underwent a left hemipelvectomy for chondrosarcoma. She presented with total incontinence and a bulging vaginal mass. Exam confirmed complete transurethral bladder eversion that was addressed with transvaginal multilayer bladder neck closure and suprapubic tube placement. Eventually she underwent abdominal hysterectomy, mesh sacral colpopexy, and catheterizable stoma creation. Patient is continent of urine 3 months postoperatively. We present the first reported case of bladder eversion after hemipelvectomy and propose possible pathophysiologic mechanisms. PMID:19629370

  8. Automatic classification of blank substrate defects

    NASA Astrophysics Data System (ADS)

    Boettiger, Tom; Buck, Peter; Paninjath, Sankaranarayanan; Pereira, Mark; Ronald, Rob; Rost, Dan; Samir, Bhamidipati

    2014-10-01

    Mask preparation stages are crucial in mask manufacturing, since this mask is to later act as a template for considerable number of dies on wafer. Defects on the initial blank substrate, and subsequent cleaned and coated substrates, can have a profound impact on the usability of the finished mask. This emphasizes the need for early and accurate identification of blank substrate defects and the risk they pose to the patterned reticle. While Automatic Defect Classification (ADC) is a well-developed technology for inspection and analysis of defects on patterned wafers and masks in the semiconductors industry, ADC for mask blanks is still in the early stages of adoption and development. Calibre ADC is a powerful analysis tool for fast, accurate, consistent and automatic classification of defects on mask blanks. Accurate, automated classification of mask blanks leads to better usability of blanks by enabling defect avoidance technologies during mask writing. Detailed information on blank defects can help to select appropriate job-decks to be written on the mask by defect avoidance tools [1][4][5]. Smart algorithms separate critical defects from the potentially large number of non-critical defects or false defects detected at various stages during mask blank preparation. Mechanisms used by Calibre ADC to identify and characterize defects include defect location and size, signal polarity (dark, bright) in both transmitted and reflected review images, distinguishing defect signals from background noise in defect images. The Calibre ADC engine then uses a decision tree to translate this information into a defect classification code. Using this automated process improves classification accuracy, repeatability and speed, while avoiding the subjectivity of human judgment compared to the alternative of manual defect classification by trained personnel [2]. This paper focuses on the results from the evaluation of Automatic Defect Classification (ADC) product at MP Mask

  9. Penetrating ocular trauma associated with blank cartridge

    PubMed Central

    2014-01-01

    Background Blank cartridge guns are generally regarded as being harmless and relative safe. However recent published articles demonstrated that the gas pressure from the exploding propellant of blank cartridge is powerful enough to penetrate the thoracic wall, abdominal muscle, small intestine and the skull. And there has been a limited number of case reports of ocular trauma associated with blank cartridge injury. In addition, no report on case with split extraocular muscle injury with traumatic cataract and penetrating corneoscleral wound associated with blank cartridge has been previously documented. This report describes the case of patient who sustained penetrating ocular injury with extraocular muscle injury by a close-distance blank cartridge that required surgical intervention. Case presentation A 20-year-old man sustained a penetrating globe injury in the right eye while cleaning a blank cartridge pistol. His uncorrected visual acuity at presentation was hand motion and he had a flame burn of his right upper and lower lid with multiple missile wounds. On slit-lamp examination, there was a 12-mm laceration of conjunctiva along the 9 o'clock position with two pinhole-like penetrating injuries of cornea and sclera. There was also a 3-mm corneal laceration between 9 o'clock and 12 o'clock and the exposed lateral rectus muscle was split. Severe Descemet's membrane folding with stromal edema was observed, and numerous yellow, powder-like foreign bodies were impacted in the cornea. Layered anterior chamber bleeding with traumatic cataract was also noted. Transverse view of ultrasonography showed hyperechoic foreign bodies with mild reduplication echoes and shadowing. However, a computed tomographic scan using thin section did not reveal a radiopaque foreign body within the right globe. Conclusion To our best knowledge, this is the first case report of split extraocular muscle injury with traumatic cataract and penetrating ocular injury caused by blank cartridge

  10. 46 CFR 56.25-7 - Blanks.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Blanks. 56.25-7 Section 56.25-7 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING PIPING SYSTEMS AND APPURTENANCES Pipe Flanges... requirements of 104.5.3 of ASME B31.1 (incorporated by reference; see 46 CFR 56.01-2)....

  11. Cardiometabolic Health in Submariners Returning from a 3-Month Patrol

    PubMed Central

    Gasier, Heath G.; Young, Colin R.; Gaffney-Stomberg, Erin; McAdams, Douglas C.; Lutz, Laura J.; McClung, James P.

    2016-01-01

    Confined space, limited exercise equipment, rotating shift work and reduced sleep may affect cardiometabolic health in submariners. To test this hypothesis, 53 male U.S. Submariners (20–39 years) were studied before and after a 3-month routine submarine patrol. Measures included anthropometrics, dietary and physical activity, biomarkers of cardiometabolic health, energy and appetite regulation, and inflammation. Before deployment, 62% of submariners had a body fat % (BF%) ≥ 25% (obesity), and of this group, 30% met the criteria for metabolic syndrome. In obese volunteers, insulin, the homeostatic model assessment of insulin resistance (HOMA-IR), leptin, the leptin/adiponectin ratio, and pro-inflammatory chemokines growth-related oncogene and macrophage-derived chemokine were significantly higher compared to non-obese submariners. Following the patrol, a significant mean reduction in body mass (5%) and fat-mass (11%) occurred in the obese group as a result of reduced energy intake (~2000 kJ) during the patrol; and, independent of group, modest improvements in serum lipids and a mean reduction in interferon γ-induced protein 10 and monocyte chemotactic protein 1 were observed. Since 43% of the submariners remained obese, and 18% continued to meet the criteria for metabolic syndrome following the patrol, the magnitude of weight loss was insufficient to completely abolish metabolic dysfunction. Submergence up to 3-months, however, does not appear to be the cause of obesity, which is similar to that of the general population. PMID:26867201

  12. Cardiometabolic Health in Submariners Returning from a 3-Month Patrol.

    PubMed

    Gasier, Heath G; Young, Colin R; Gaffney-Stomberg, Erin; McAdams, Douglas C; Lutz, Laura J; McClung, James P

    2016-02-01

    Confined space, limited exercise equipment, rotating shift work and reduced sleep may affect cardiometabolic health in submariners. To test this hypothesis, 53 male U.S. Submariners (20-39 years) were studied before and after a 3-month routine submarine patrol. Measures included anthropometrics, dietary and physical activity, biomarkers of cardiometabolic health, energy and appetite regulation, and inflammation. Before deployment, 62% of submariners had a body fat % (BF%) ≥ 25% (obesity), and of this group, 30% met the criteria for metabolic syndrome. In obese volunteers, insulin, the homeostatic model assessment of insulin resistance (HOMA-IR), leptin, the leptin/adiponectin ratio, and pro-inflammatory chemokines growth-related oncogene and macrophage-derived chemokine were significantly higher compared to non-obese submariners. Following the patrol, a significant mean reduction in body mass (5%) and fat-mass (11%) occurred in the obese group as a result of reduced energy intake (~2000 kJ) during the patrol; and, independent of group, modest improvements in serum lipids and a mean reduction in interferon γ-induced protein 10 and monocyte chemotactic protein 1 were observed. Since 43% of the submariners remained obese, and 18% continued to meet the criteria for metabolic syndrome following the patrol, the magnitude of weight loss was insufficient to completely abolish metabolic dysfunction. Submergence up to 3-months, however, does not appear to be the cause of obesity, which is similar to that of the general population. PMID:26867201

  13. Novel EUV Mask Blank Defect Repair Developments

    SciTech Connect

    Hau-Riege, S; Barty, A; Mirkarimi, P

    2003-03-31

    The development of defect-free reticle blanks is an important challenge facing the commercialization of extreme ultraviolet lithography (EUVL). The basis of EUVL reticles are mask blanks consisting of a substrate and a reflective Mo/Si multilayer. Defects on the substrate or defects introduced during multilayer deposition can result in critical phase and amplitude defects. Amplitude- or phase-defect repair techniques are being developed with the goal to repair many of these defects. In this report, we discuss progress in two areas of defect repair: (1) We discuss the effect of the residual reflectance variation over the repair zone after amplitude-defect repair on the process window. This allows the determination of the maximum tolerable residual damage induced by amplitude defect repair. (2) We further performed a quantitative assessment of the yield improvement due to defect repair. We found that amplitude- and phase-defect repair have the potential to significantly improve mask blank yield. Our calculations further show that yield can be maximized by increasing the number of Mo/Si bilayers.

  14. Seeing Red and Shooting Blanks: Study of Red Quasars and Blank X-Ray Sources

    NASA Technical Reports Server (NTRS)

    Oliversen, Ronald (Technical Monitor); Elvis, Martin

    2005-01-01

    A major paper describing the technique and providing a list of 'blanks' was published in the Astrophysical Journal (abstract below). The results revealed a fascinating trove of novel X-ray sources: high redshift clusters of galaxies found efficiently; X-ray absorbed, optically clean AGN, which may be the bright prototypes of Chandra Deep Survey sources; and several with a still unknown nature. Recent XMM-Newton results confirm the existence of this class of X-ray source with much refined positions. During the first year of this project we have made a major discovery. The second 'blanks' X-ray source observed with Chandra was found to be extended. Using Chandra data and ground-based R and K band imaging we estimated this to be a high redshift cluster of galaxies with z approx. 0.85. Spectroscopy agrees with this estimate (z=0.89). This success shows that our method of hunting down 'blank' field X-ray sources is a highly efficient method of finding the otherwise elusive high redshift clusters. With extensive follow-up we should be able to use 'blanks' to make cosmological tests. The paper is now in press in the Astrophysical Journal (abstract below.) The other Chandra source is point-like, showing that there are a variety of 'blank' source types. Other follow-up observations with XMM-Newton, and (newly approved in cycle 2) with Chandra are eagerly awaited. A follow-up paper uses a large amount of supporting data for the remaining blanks. A combination of ROSAT, Chandra and ground based data convincingly identified one of the blanks as a Ultra-luminous X-ray source (ULX) in a spiral galaxy (abstract below). This program resulted in 3 refereed papers in major journals, 4 conference proceedings and a significant fraction of the PhD thesis of Dr. Ilaria Cagnoni. Details of the publications are given.

  15. Maternal depressive symptoms and parenting practices 3-months postpartum.

    PubMed

    Balbierz, Amy; Bodnar-Deren, Susan; Wang, Jason J; Howell, Elizabeth A

    2015-06-01

    Using data from two postpartum depression randomized trials, we examined the association between postpartum depressive symptoms and parenting practices among a diverse group of mothers. We examined the association between safety practices (back sleep position, car seat use, smoke alarm), feeding practices (breastfeeding, infant intake of cereal, juice, water), and health care practices (routine well child and Emergency Room (ER) visits) with 3-month postpartum depressive symptoms assessed using the Edinburgh Depression Scale (EPDS ≥10). Fifty-one percent of mothers were black or Latina, 33 % had Medicaid, and 30 % were foreign born. Depressed mothers were less likely to have their infant use back sleep position (60 vs. 79 %, p < .001), always use a car seat (67 vs. 84 %, p < .001), more likely to feed their infants water, juice, or cereal (36 vs. 25 %, p = .04 respectively), and to bring their babies for ER visits (26 vs. 16 %, p = .03) as compared with non-depressed mothers. In multivariable model, depressed mothers remained less likely to have their infant use the back sleep position, to use a car seat, and to have a working smoke alarm in the home. Findings suggest the need to intervene early among mothers with depressive symptoms and reinforce positive parenting practices. PMID:25374288

  16. Congenital diaphragmatic hernia, Meckel's diverticulum and malrotation in a 3-month-old infant

    PubMed Central

    Basani, Laxman; Aepala, Roja; Mohan Reddy, B. Madhu

    2016-01-01

    Congenital diaphragmatic hernia (CDH) is a common developmental anomaly that usually presents in the neonatal period. It is known to be associated with cardiac, renal, genital and chromosomal anomalies. Late presentation of CDH (beyond 1-month of age) is seen in 13% of the cases. Malrotation is reported in 42% of CDH cases. We report a case of a 3-month-old infant with concurrent CDH, Meckel's diverticulum and malrotation. This is the first case report of such an association in an infant. PMID:27251525

  17. Congenital diaphragmatic hernia, Meckel's diverticulum and malrotation in a 3-month-old infant.

    PubMed

    Basani, Laxman; Aepala, Roja; Reddy, B Madhu Mohan

    2016-01-01

    Congenital diaphragmatic hernia (CDH) is a common developmental anomaly that usually presents in the neonatal period. It is known to be associated with cardiac, renal, genital and chromosomal anomalies. Late presentation of CDH (beyond 1-month of age) is seen in 13% of the cases. Malrotation is reported in 42% of CDH cases. We report a case of a 3-month-old infant with concurrent CDH, Meckel's diverticulum and malrotation. This is the first case report of such an association in an infant. PMID:27251525

  18. EUV scanner printability evaluation of natural blank defects detected by actinic blank inspection

    NASA Astrophysics Data System (ADS)

    Takagi, Noriaki; Watanabe, Hidehiro; Van den Heuvel, Dieter; Jonckheere, Rik; Gallagher, Emily

    2015-07-01

    In this study, on-wafer printability test results of native blank defects on an EUV reticle, previously detected on the ABI (Actinic blank inspection) tool, were interpreted with on-mask analysis. One of the main factors that affects printability is the relative defect position to the absorber pattern. The ABI tool has been used for this purpose, by means of on-mask review. Subsequently, by removing covered defects (blank defects which are covered with absorber pattern), a clear relationship between DSI (ABI defect signal intensity) and printability was confirmed. By considering a relationship between relative defect position and printability precisely, a tentative printability threshold was defined with DSI. This result suggests that DSI has valuable information to define printability threshold, and shows significance of ABI inspection.

  19. Comparison of CAIRS and STATUS Information Storage and Retrieval Software over a 3-Month Period.

    ERIC Educational Resources Information Center

    Hoey, P. O'N.

    1982-01-01

    The Ministry of Agriculture, Fisheries and Food conducted an operational evaluation of the software packages CAIRS and STATUS, which were used to build databases and databanks. Setting up the trial, types of data involved (chemical products used as pesticides), searching and presentation of data, and the final choice are covered. (EJS)

  20. Artifacts induced by selective blanking of time-domain data in Fourier transform mass spectrometry.

    PubMed

    Xian, Feng; Valeja, Santosh G; Beu, Steve C; Hendrickson, Christopher L; Marshall, Alan G

    2013-11-01

    Fourier transform mass spectrometry (FTMS) of the isolated isotopic distribution for a highly charged biomolecule produces time-domain signal containing large amplitude signal "beats" separated by extended periods of much lower signal magnitude. Signal-to-noise ratio for data sampled between beats is low because of destructive interference of the signals induced by members of the isotopic distribution. Selective blanking of the data between beats has been used to increase spectral signal-to-noise ratio. However, blanking also eliminates signal components and, thus, can potentially distort the resulting FT spectrum. Here, we simulate the time-domain signal from a truncated isotopic distribution for a single charge state of an antibody. Comparison of the FT spectra produced with or without blanking and with or without added noise clearly show that blanking does not improve mass accuracy and introduces spurious peaks at both ends of the isotopic distribution (thereby making it more difficult to identify posttranslational modifications and/or adducts). Although the artifacts are reduced by use of multiple Gaussian (rather than square wave) windowing, blanking appears to offer no advantages for identifying true peaks or for mass measurement.

  1. Quasars in the MAMBO blank field survey

    NASA Astrophysics Data System (ADS)

    Voss, H.; Bertoldi, F.; Carilli, C.; Owen, F. N.; Lutz, D.; Holdaway, M.; Ledlow, M.; Menten, K. M.

    2006-03-01

    Our MAMBO 1.2 mm blank field imaging survey of ~0.75 sqd has uncovered four unusually bright sources, with flux densities between 10 and 90 mJy, all located in the Abell 2125 field. The three brightest are flat spectrum radio sources with bright optical and X-ray counterparts. Their mm and radio flux densities are variable on timescales of months. Their X-ray luminosities classify them as quasars. The faintest of the four mm bright sources appears to be a bright, radio-quiet starburst at z˜3, similar to the sources seen at lower flux densities in the MAMBO and SCUBA surveys. It may also host a mildly obscured AGN of quasar-like X-ray luminosity. The three non-thermal mm sources imply an areal density of flat spectrum radio sources higher by at least 7 compared with that expected from an extrapolation of the lower frequency radio number counts.

  2. Periodization

    PubMed Central

    Lorenz, Daniel S.; Reiman, Michael P.; Walker, John C.

    2010-01-01

    Background: Clinicians are constantly faced with the challenge of designing training programs for injured and noninjured athletes that maximize healing and optimize performance. Periodization is a concept of systematic progression—that is, resistance training programs that follow predictable patterns of change in training variables. The strength training literature is abundant with studies comparing periodization schemes on uninjured, trained, and untrained athletes. The rehabilitation literature, however, is scarce with information about how to optimally design resistance training programs based on periodization principles for injured athletes. The purpose of this review is to discuss relevant training variables and methods of periodization, as well as periodization program outcomes. A secondary purpose is to provide an anecdotal framework regarding implementation of periodization principles into rehabilitation programs. Evidence Acquisition: A Medline search from 1979 to 2009 was implemented with the keywords periodization, strength training, rehabilitation, endurance, power, hypertrophy, and resistance training with the Boolean term AND in all possible combinations in the English language. Each author also undertook independent hand searching of article references used in this review. Results: Based on the studies researched, periodized strength training regimens demonstrate improved outcomes as compared to nonperiodized programs. Conclusions: Despite the evidence in the strength training literature supporting periodization programs, there is a considerable lack of data in the rehabilitation literature about program design and successful implementation of periodization into rehabilitation programs. PMID:23015982

  3. Hydroforming Of Patchwork Blanks — Numerical Modeling And Experimental Validation

    NASA Astrophysics Data System (ADS)

    Lamprecht, Klaus; Merklein, Marion; Geiger, Manfred

    2005-08-01

    In comparison to the commonly applied technology of tailored blanks the concept of patchwork blanks offers a number of additional advantages. Potential application areas for patchwork blanks in automotive industry are e.g. local reinforcements of automotive closures, structural reinforcements of rails and pillars as well as shock towers. But even if there is a significant application potential for patchwork blanks in automobile production, industrial realization of this innovative technique is decelerated due to a lack of knowledge regarding the forming behavior and the numerical modeling of patchwork blanks. Especially for the numerical simulation of hydroforming processes, where one part of the forming tool is replaced by a fluid under pressure, advanced modeling techniques are required to ensure an accurate prediction of the blanks' forming behavior. The objective of this contribution is to provide an appropriate model for the numerical simulation of patchwork blanks' forming processes. Therefore, different finite element modeling techniques for patchwork blanks are presented. In addition to basic shell element models a combined finite element model consisting of shell and solid elements is defined. Special emphasis is placed on the modeling of the weld seam. For this purpose the local mechanical properties of the weld metal, which have been determined by means of Martens-hardness measurements and uniaxial tensile tests, are integrated in the finite element models. The results obtained from the numerical simulations are compared to experimental data from a hydraulic bulge test. In this context the focus is laid on laser- and spot-welded patchwork blanks.

  4. Blank fire configuration for automatic pistol

    DOEpatents

    Teague, Tommy L.

    1990-01-01

    A pistol configured to fire blank cartridges includes a modified barrel with a breech portion connected to an aligned inner sleeve. Around the inner sleeve, there is disposed an outer sleeve having a vent therein through which the cartridge discharges. The breech portion is connected to a barrel anchor to move backward in a slight arc when the pistol is fired. A spring retention rod projects from the barrel anchor and receives a shortened recoil spring therearound which recoil spring has one end abutting a stop on the barrel anchor and the other end in abutment with the end of a spring retaining cup. The spring retaining cup is engaged by a flange projecting from a slide so that when the pistol is fired, the slide moves rearwardly against the compression of the spring to eject the spent cartridge and then moves forwardly under the urging of the spring to load a fresh cartridge into the breech portion. The spring then returns all of the slidable elements to their initial position so that the pistol may again be fired.

  5. Novel acid-free cleaning process for mask blanks

    NASA Astrophysics Data System (ADS)

    Koster, Harald; Branz, Karsten; Dietze, Uwe; Dress, Peter; Hess, Guenter

    2005-06-01

    Knowledge of particle removal during the mask cleaning was transferred to the blank cleaning and vice versa. The experiments are focusing on a variety of blank substrates (glass substrates, chrome on glass blanks and phase shift mask blanks substrates). The principal equipment concept and the process optimization strategies for cleaning of those different kinds of blank substrates are presented. With a fixed process flow, including UV-treatment, Fulljet and MegaSonic treatment, Rinse and Dry, process parameters are varied to define the optimum process conditions. Criteria for an optimum process are particle removal efficiency in general and optical integrity for phase shift mask blanks in particular. The particle removal efficiency for all investigated blank types is within a range of 96-100%. Especially for Ta/SiO2 phase shift mask blanks we demonstrate that during the cleaning process the optical properties only change by 0.07° phase loss and 0.01% transmission loss per cleaning cycle, respectively.

  6. Coping Card Usage can Further Reduce Suicide Reattempt in Suicide Attempter Case Management Within 3-Month Intervention.

    PubMed

    Wang, Ying-Chuan; Hsieh, Ling-Yu; Wang, Ming-Yu; Chou, Cheng-Hsiang; Huang, Min-Wei; Ko, Huei-Chen

    2016-02-01

    This randomized controlled trial was designed to evaluate the effectiveness of using crisis coping cards (n = 32) in the case management of suicide prevention compared with case management without the use of coping cards (n = 32) over a 3-month intervention period. The generalized estimating equation was used to examine the interaction effect between treatments and time on suicide risk, depression, anxiety, and hopelessness. Results indicated that subsequent suicidal behaviors, severity of suicide risk, depression, anxiety, and hopelessness were reduced more in the coping card intervention group compared to the case management only group. Moreover, for the survival curves of time to suicide reattempt, the coping card group showed a significantly longer time to reattempt than the case management only group at 2-month and 3-month intervention periods.

  7. Evidence of printing blank-related defects on EUV masks missed by blank inspection

    NASA Astrophysics Data System (ADS)

    Jonckheere, Rik; Van den Heuvel, Dieter; Bret, Tristan; Hofmann, Thorsten; Magana, John; Aharonson, Israel; Meshulach, Doron; Hendrickx, Eric; Ronse, Kurt

    2011-03-01

    In this follow-up paper for our contribution at BACUS 2010, first evidence is shown that also the more advanced Lasertec M7360 has missed a few printing reticle defects caused by an imperfection of its EUV mirror, a so-called multilayer defect (ML-defect). This work continued to use a combination of blank inspection (BI), patterned mask inspection (PMI) and wafer inspection (WI) to find as many as possible printing defects on EUV reticles. The application of more advanced wafer inspection, combined with a separate repeater analysis for each of the multiple focus conditions used for exposure on the ASML Alpha Demo Tool (ADT) at IMEC, has allowed to increase the detectability of printing MLdefects. The latter uses the previous finding that ML-defects may have a through-focus printing behavior, i.e., they cause a different grade of CD impact on the pattern in their neighborhood, depending on the focus condition. Subsequent reticle review is used on the corresponding locations with both SEM (Secondary Electron Microscope) and AFM (Atomic Force Microscope). This review methodology has allowed achieving clear evidence of printing ML defects missed by this BI tool, despite of an unacceptable nuisance rate reported before. This is a next step in the investigation if it is possible to avoid actinic blank inspection (ABI) at all, the only presently known technique that is expected to be independent from the presence of a (residual) topography of the ML-defect at the top of the EUV mirror, in detecting those defects. This is considered an important asset of blank inspection, because the printability of a ML-defect on the EUV scanner and its detectability by ABI is determined by the distortion throughout the multilayer, not that at the surface.

  8. Advances in the detection capability on actinic blank inspection

    NASA Astrophysics Data System (ADS)

    Yamane, Takeshi; Amano, Tsuyoshi; Takagi, Noriaki; Watanabe, Hidehiro; Mori, Ichro; Ino, Tomohisa; Suzuki, Tomohiro; Takehisa, Kiwamu; Miyai, Hiroki; Kusunose, Haruhiko

    2016-03-01

    Improvements in the detection capability of a high-volume-manufacturing (HVM) actinic blank inspection (ABI) prototype for native defects caused by illumination numerical aperture (NA) enlargement were evaluated. A mask blank was inspected by varying the illumination NA. The defect signal intensity increased with illumination NA enlargement as predicted from simulation. The mask blank was also inspected with optical tools, and no additional phase defect was detected. All of the printable phase defects were verified to have been detected by the HVM ABI prototype.

  9. The effects of aerobic exercise on cognition in schizophrenia: A 3-month follow-up study.

    PubMed

    Su, Chwen-Yng; Wang, Peng-Wei; Lin, Yi-Jean; Tang, Tze-Chun; Liu, Mei-Fang; Chen, Ming-De

    2016-10-30

    Aerobic exercise (AE) has been shown to improve cognition in patients with schizophrenia. However, it remains unclear whether these exercise-induced cognitive benefits persist beyond the training period. Accordingly, the present study sought to examine the immediate and maintenance effects of AE on a wide range of cognitive functions in 75 schizophrenia patients randomized to 12 weeks of either moderate-intensity treadmill exercise or stretching and toning exercise that served as a control. Participants completed assessments of neurocognition and cardiovascular fitness at pretest, posttest, and 3-month follow-up. The results showed that the AE group outperformed the controls on processing speed and attention at the end of intervention. The two groups did not differ significantly in any cognitive outcome measured at follow-up; however, improvement over time was noted in certain cognitive domains in AE group. The average effect sizes at follow-up were 0.53 and 0.35 for AE and control groups, respectively. There were no significant between-group differences in aerobic fitness at posttest and follow-up, and that fitness level was not related to changes in cognitive performance. These findings provide preliminary evidence for a trend towards beneficial effects of physical activity on cognition over a short follow-up period in favor of AE. PMID:27525830

  10. The effects of aerobic exercise on cognition in schizophrenia: A 3-month follow-up study.

    PubMed

    Su, Chwen-Yng; Wang, Peng-Wei; Lin, Yi-Jean; Tang, Tze-Chun; Liu, Mei-Fang; Chen, Ming-De

    2016-10-30

    Aerobic exercise (AE) has been shown to improve cognition in patients with schizophrenia. However, it remains unclear whether these exercise-induced cognitive benefits persist beyond the training period. Accordingly, the present study sought to examine the immediate and maintenance effects of AE on a wide range of cognitive functions in 75 schizophrenia patients randomized to 12 weeks of either moderate-intensity treadmill exercise or stretching and toning exercise that served as a control. Participants completed assessments of neurocognition and cardiovascular fitness at pretest, posttest, and 3-month follow-up. The results showed that the AE group outperformed the controls on processing speed and attention at the end of intervention. The two groups did not differ significantly in any cognitive outcome measured at follow-up; however, improvement over time was noted in certain cognitive domains in AE group. The average effect sizes at follow-up were 0.53 and 0.35 for AE and control groups, respectively. There were no significant between-group differences in aerobic fitness at posttest and follow-up, and that fitness level was not related to changes in cognitive performance. These findings provide preliminary evidence for a trend towards beneficial effects of physical activity on cognition over a short follow-up period in favor of AE.

  11. Determinants of attentive blank stares. An EFRP study.

    PubMed

    Fudali-Czyż, Agnieszka; Francuz, Piotr; Augustynowicz, Paweł

    2014-10-01

    Attentive blank stares mean a failure to notice changes in a visual scene, despite looking at the area of change (Caplovitz, Fendrich, & Hughes, 2008). In this research project we have shown that people differ in terms of attentive blank stare incidences. Novices tend to fail to notice changes in the target area more often than experts. This effect is greater in persons with low visual working memory capacity (VWMC) than with high VWMC. In addition, in a group of novices with low VWMC, attentive blank stares are more frequent compared to a group with high VWMC. Attentive blank stares did not disappear even after the high VWMC group were given expertise training. With the method of eye-fixation-related potentials (EFRP) we analyzed the amplitude of lambda response, which may reflect the state of the attentional system, during encoding information about a change, prior to a decision whether a change has occurred or not. We demonstrate that the cases of attentive blank stares are accompanied by significantly lower amplitude of the lambda response compared with cases involving change detection. In addition, we discovered greater lambda responses in a group with expertise who noticed the change than in novices. The EFRP record coming from occipital electrodes in the 80-180ms window function was marked by left-sided asymmetry in the cases of change detection and by right-sided asymmetry in the cases of attentive blank stares.

  12. Determination of Optimal Blank Shape by Radius Vector Method

    NASA Astrophysics Data System (ADS)

    Shim, Hyun Bo; Park, Jong Kyu; Kim, Yang Soo

    2004-06-01

    A new method of optimal blank shape design for stampings of arbitrary shapes has been proposed. Similar to the sensitivity method, a past work of the present author, the basic nature of this method is iterative modification of an undeformed blank shape by adjusting the nodal positions at the boundary of the blank, until the final shape satisfies a target shape. The main difference from the sensitivity method is that both shape error measure and blank shape modification is done along the normal to a boundary direction in the current method instead of nodal moving direction as in the sensitivity method. Even though the sensitivity method has been proven to be excellent through experiment, huge computational effort is still a problem since the method requires a couple of deformation process analyses per each design stage. Differently from the sensitivity method, the present radius vector method requires only a single deformation analysis per each design step and it can handle an extraordinary motion due to a rigid-body rotation during forming. Drawings of L-shaped cup and wheel housing have been chosen as the examples to verify the present method. In every cases the optimal blank shapes have been obtained after a few times of modification. Through the investigation, the present method, which incorporates normal to boundary is found to be an excellent, or better than the sensitivity method, which incorporates moving direction, for the optimal blank design.

  13. Determinants of attentive blank stares. An EFRP study.

    PubMed

    Fudali-Czyż, Agnieszka; Francuz, Piotr; Augustynowicz, Paweł

    2014-10-01

    Attentive blank stares mean a failure to notice changes in a visual scene, despite looking at the area of change (Caplovitz, Fendrich, & Hughes, 2008). In this research project we have shown that people differ in terms of attentive blank stare incidences. Novices tend to fail to notice changes in the target area more often than experts. This effect is greater in persons with low visual working memory capacity (VWMC) than with high VWMC. In addition, in a group of novices with low VWMC, attentive blank stares are more frequent compared to a group with high VWMC. Attentive blank stares did not disappear even after the high VWMC group were given expertise training. With the method of eye-fixation-related potentials (EFRP) we analyzed the amplitude of lambda response, which may reflect the state of the attentional system, during encoding information about a change, prior to a decision whether a change has occurred or not. We demonstrate that the cases of attentive blank stares are accompanied by significantly lower amplitude of the lambda response compared with cases involving change detection. In addition, we discovered greater lambda responses in a group with expertise who noticed the change than in novices. The EFRP record coming from occipital electrodes in the 80-180ms window function was marked by left-sided asymmetry in the cases of change detection and by right-sided asymmetry in the cases of attentive blank stares. PMID:25087155

  14. Study on toxicity of danshensu in beagle dogs after 3-month continuous intravenous infusion.

    PubMed

    Li, Guisheng; Gao, Yonglin; Li, Shenjun; Li, Chunmei; Zhu, Xiaoyin; Li, Min; Liu, Zhifeng

    2009-09-01

    Danshensu (3-(3,4-dihydroxyphenyl) lactic acid), a natural phenolic acid, is isolated from root of Salvia miltiorrhiza, and is widely used as a traditional Chinese medicine for treatment of various cardiovascular diseases. In the present study, toxicity of danshensu was evaluated in male and female dogs after 3-month continuous intravenous infusion. Beagle dogs were treated with danshensu at doses of 17, 50, and 150 mg/kg/day, and observed for 90 days followed by recovery periods. Measurements included clinical observations, body weight, food consumption, temperature, electro-cardiography (EGC), hematology, blood chemistry, urinalysis, gross necropsy, organ weight, and histopathology. No significant adverse effects on these parameters were observed. The only treatment-related finding was a hard knot at injection site observed in the 150 mg/kg group after 2-3 weeks continuous administration, and returned to normal after 3-4 days withdrawal. From these results, it might be concluded that danshensu did not produce any significant cumulative toxicity at the doses administered, as reflected by the various parameters investigated. PMID:19778246

  15. Seeing Red and Shooting Blanks: A Study of Red Quasars And Blank Field X-Ray Sources

    NASA Technical Reports Server (NTRS)

    Oliversen, Ronald J. (Technical Monitor); Elvis, Martin

    2003-01-01

    The primary source catalog of 'blanks' (bright ROSAT sources with no optical counterparts) has been published in the Astrophysical Journal. The first follow-up paper has also been published. This paper used a combination of ROSAT, Chandra and ground based data to convincingly identify one of the blanks as a Ultra-luminous X-ray source (ULX) in a spiral galaxy. A paper detailing optical and near-IR imaging observations of the remaining sources is underway.

  16. Amplitude blanking in seismic profiles from Lake Baikal

    USGS Publications Warehouse

    Lee, M.W.; Agena, W.F.; Hutchinson, D.R.

    1996-01-01

    Imaging of the deepest sedimentary section in Lake Baikal using multichannel seismic profiling was hampered by amplitude blanking that is regionally extensive, is associated with water depths greater than about 900 m and occurs at sub-bottom depths of 1-2 km in association with the first water-bottom multiple. Application of a powerful multiple suppression technique improved the quality of occasional discontinuous, dipping primary reflections, but failed to substantially alter the non-reflective character of the blanking zone. Detailed analysis of amplitudes from original data and synthetic models show that the threshold for detecting primary energy in deep water of Lake Baikal occurs when the primary is about 14-20 dB less than the multiple energy. The blanking occurs because of anomalously low reflectivities of the deep sediments coupled with this 20 dB limitation in real data processing. The blanking cuts across seismic stratal boundaries, and is therefore probably unrelated to depositional lithologies. The deepest, early rift deposits, inferred to come from a mixed fluvial and lacustrine setting, do not easily explain the widespread and uniform character of the blanked deposits. More likely, blanking occurs because of processes or phenomena that physically alter the deposits, causing them to be non-reflective and/or highly attenuating. No single process explains all the observations, but a combination of diagenesis, overpressure, and the presence of dispersed free gas at sub-bottom depths of 1-2 km, offer plausible and possible conditions that contribute to blanking. Copyright ?? 1996 Published by Elsevier Science Ltd.

  17. Jointly structuring triadic spaces of meaning and action: book sharing from 3 months on

    PubMed Central

    Rossmanith, Nicole; Costall, Alan; Reichelt, Andreas F.; López, Beatriz; Reddy, Vasudevi

    2014-01-01

    This study explores the emergence of triadic interactions through the example of book sharing. As part of a naturalistic study, 10 infants were visited in their homes from 3–12 months. We report that (1) book sharing as a form of infant-caregiver-object interaction occurred from as early as 3 months. Using qualitative video analysis at a micro-level adapting methodologies from conversation and interaction analysis, we demonstrate that caregivers and infants practiced book sharing in a highly co-ordinated way, with caregivers carving out interaction units and shaping actions into action arcs and infants actively participating and co-ordinating their attention between mother and object from the beginning. We also (2) sketch a developmental trajectory of book sharing over the first year and show that the quality and dynamics of book sharing interactions underwent considerable change as the ecological situation was transformed in parallel with the infants' development of attention and motor skills. Social book sharing interactions reached an early peak at 6 months with the infants becoming more active in the coordination of attention between caregiver and book. From 7 to 9 months, the infants shifted their interest largely to solitary object exploration, in parallel with newly emerging postural and object manipulation skills, disrupting the social coordination and the cultural frame of book sharing. In the period from 9 to 12 months, social book interactions resurfaced, as infants began to effectively integrate manual object actions within the socially shared activity. In conclusion, to fully understand the development and qualities of triadic cultural activities such as book sharing, we need to look especially at the hitherto overlooked early period from 4 to 6 months, and investigate how shared spaces of meaning and action are structured together in and through interaction, creating the substrate for continuing cooperation and cultural learning. PMID:25540629

  18. Seeing Red and Shooting Blanks: A Study of Red Quasars and Blank Field X-Ray Sources

    NASA Technical Reports Server (NTRS)

    Elvis, Martin; Oliversen, Ronald J. (Technical Monitor)

    2002-01-01

    We have identified a population of 'blank field sources' (or 'blanks') among the ROSAT (Roentgen Satellite) bright unidentified X-ray sources with faint optical counterparts. The extreme X-ray over optical flux ratio of blank field sources is not compatible with the main classes of X-ray emitters except for extreme BL Lacertae objects at fx/fv is equal to or less than 35. From the analysis of ROSAT archival data we found evidence for only three sources, out of 16, needing absorption in excess of the Galactic value and no indication of variability. We also found evidence for an extended nature for only one of the five blanks with a serendipitous HRI (High Resolution Imager) detection; this source (1WGA J1226.9+3332) was confirmed as a z=0.89 cluster of galaxies. Palomar images reveal the presence of a red (O - E is equal to or greater than 2) counterpart in the X-ray error circle for six blanks. The identification process brought to the discovery of another high z cluster of galaxies, one (possibly extreme) BL Lac and two apparently normal type 1 AGNs (Active Galactic Nuclei). These AGNs, together with four more AGN-like objects seem to form a well defined group: they present type 1 X-ray spectra but red Palomar counterparts. We discuss the possible explanations for the discrepancy between the X-ray and optical data, among which: a suppressed big blue bump emission, an extreme dust to gas (approximately 40 - 60 the Galactic ratio) ratio value and a high redshift (z is greater than or equal to 3.5) QSO (Quasi-Stellar Object) nature. These AGN-like blanks seem to be the bright (and easier to study) analogs of the sources which are being found in deep Chandra observations. Five more blanks have a still an unknown nature.

  19. Influence of 3 months endurance training on red cell deformability in non insulin dependent type 2 diabetes mellitus patients.

    PubMed

    Ahmad, B; Opitz, D; Bloch, W; Brixius, K

    2013-08-01

    The main purpose of the study was to examine if 3 months of bicycle endurance training alters the red cell deformability in non insulin dependent type 2 diabetes mellitus men.The red cell deformability was measured with the Laser assisted optical rotational cell analyzer. The maximal elongation index and the semimaximal shear stress were measured with the Lineweaver Burke model.At the beginning and the end of the intervention the patients passed a bicycle ergometry test. As a reference group, 13 males without diabetes passed the same testing procedure. Blood samplings were taken before testing, immediately after physical exhaustion and after a 30 min recovery phase.After the training period diabetic patients could significantly reduce BMI, fasting glucose and HbA1c. The reference group had significantly higher elongation indices than the diabetes patients independent from training status. After the training period the basal values of the maximal elongation index did not change significantly. However, maximal elongation indices were significantly reduced after physical examination and in resting time.The semimaximal shear stress of diabetes patients did not alter during the training period. In comparison to the reference group semimaximal shear stress was significantly reduced at all measurement times.This pilot study proves that the maximal elongation index is significantly decreased in diabetes mellitus patients. After 3 months endurance training the red cells become more rigid while the semimaximal shear stress remains constant. Further interventions are required to analyze the exact cause of the presented findings.

  20. The sound insulations of studio doors. Part 1: Door blanks

    NASA Astrophysics Data System (ADS)

    Plumb, G. D.; Clark, R.

    The sound insulations of a range of different door blanks were measured. The results were compared with the sound insulations of existing BBC door blanks. The new doors were made from medium density fiberboard (MDF) which is more stable than the blockboard used in existing studio doors. Consequently, they should require less maintenance and adjustment and should have a longer lifespan. The doors had higher sound insulations for their weight than existing designs, which might permit savings in the costs of the surrounding building structures. Overall construction costs of the door blanks themselves are likely to be similar to those of existing designs. A companion Report (BBC RD 1994/15) describes sound insulation measurements made on plant-on door seals. The intention of this work was to simplify the construction of the door frame and the fitting of the seals to reduce costs.

  1. Strong Vocational Interest Blank Introversion Extraversion and Occupational Membership

    ERIC Educational Resources Information Center

    Johansson, Charles B.

    1970-01-01

    Item responses for the Strong Vocational Interest Blank (SVIB) were contrasted for a group of introverts and extraverts. A scale was constructed for the SVIB to measure a dimension of occupational introversion extraversion (OIE). Test retest reliability of the OIE was ofthe same magnitude as the other SVIB scales. Occupations were then ranked on…

  2. Analysis of heat transfer during quenching of a gear blank

    SciTech Connect

    Aceves, S M; Sahai, V

    1999-03-01

    This paper presents experimental and numerical results for the quench of a gear blank in agitated and stagnant oil. Heat transfer within the gear blank is analyzed with a whole domain-optimizer technique inverse solution method, to calculate the time history at every point in the gear blank. The development of this procedure represents the first stage in an overall analysis of the quench process that will later include material phase transformations and deformation. The paper presents ten variations in setting up the inverse problem, to analyze which combination of independent variables and decision variables results in the best match between experimental and numerical results. The results indicate that dividing the boundary of the gear blank into four zones and assigning a fixed heat transfer coefficient or heat flux to each zone yields an average RMS error (average difference between experimental and numerical results) of the order of 40 K. This error can be reduced by either increasing the number of zones, by reducing the number of thermocouples being matched, or by allowing the heat transfer or heat flux to vary within the zones. Of these possibilities, variation of heat transfer within the zones gives the best improvement in the quality of the match for the amount of extra effort required to run the problem.

  3. [Dangerousness of blank fright guns and salute rifles].

    PubMed

    Schöning, R; Krause, D; Lichtenberg, W; Schmidt, U; Effenberger, O

    1997-01-01

    According to the German law salute-fire guns altered weapons with a barrel length of more than 60 cm. They have inside the barrel special constructions, which are guiding the gunshot residues under high pressure to the muzzle. Therefore they own an high potential of injury, like blank-cartridge guns with short barrels.

  4. Grammatical Categories in Robert Frost's Blank Verse: A Quantitative Analysis.

    ERIC Educational Resources Information Center

    Lyford, Roland Hazen

    Structural linguistic techniques were utilized to categorize the grammatical elements employed by Robert Frost in 46 blank-verse poems. Nineteen main grammatical categories and 26 verb sub-categories based on distinctive selection criteria were devised to examine the range and distribution of Frost's grammatical patterns. Five control poems by E.…

  5. A randomized controlled trial of brain training with non-action video games in older adults: results of the 3-month follow-up.

    PubMed

    Ballesteros, Soledad; Mayas, Julia; Prieto, Antonio; Toril, Pilar; Pita, Carmen; Laura, Ponce de León; Reales, José M; Waterworth, John A

    2015-01-01

    This randomized controlled study (ClinicalTrials.gov NCT02007616) investigated the maintenance of training effects of 20 1-hr non-action video game training sessions with selected games from a commercial package on several age-declining cognitive functions and subjective wellbeing after a 3-month no-contact period. Two groups of cognitively normal older adults participated in both the post-training (posttest) and the present follow-up study, the experimental group who received training and the control group who attended several meetings with the research team during the study but did not receive training. Groups were similar at baseline on demographics, vocabulary, global cognition, and depression status. Significant improvements in the trained group, and no variation in the control group had been previously found at posttest, in processing speed, attention and visual recognition memory, as well as in two dimensions of subjective wellbeing. In the current study, improvement from baseline to 3 months follow-up was found only in wellbeing (Affection and Assertivity dimensions) in the trained group whereas there was no change in the control group. Previous significant improvements in processing speed, attention and spatial memory become non-significant after the 3-month interval. Training older adults with non-action video games enhanced aspects of cognition just after training but this effect disappeared after a 3-month no-contact follow-up period. Cognitive plasticity can be induced in older adults by training, but to maintain the benefits periodic boosting sessions would be necessary.

  6. EUV mask blank: defect detection at 100 nm

    NASA Astrophysics Data System (ADS)

    Hue, Jean; Quesnel, Etienne; Pelle, Catherine; Muffato, Viviane; Carini, G.; Favier, Sylvie; Besson, Pascal

    2003-06-01

    The characteristics of a defect counting tool, COMNET< based on scattering light measurement, is presented. This prototype supports the development of defect-free EUV blanks. Thanks to new improvements, it becomes possible to detect PSL particles having a diameter as low as 100 nm, with a video CCD camera, on silicon substrates or on EUV blanks. To reach this sensitivity, one of the enhancements consists in a laser irradiation close to 65°. The present configuration and the use of a CCD camera, with a variable exposure time, should lead to the detection of 80 nm PSL particles deposited on silicon substrate. This extrapolation is based on experimental results and on a simple model. To detect 100 nm particle and smaller particles, it is essential to reduce the level of stray light and to increase the signal to noise ratio. In our application, the stray light essentially comes from three sources: the noise induced by the roughness of the sample, the Rayleigh scattering of the atmosphere, and the stray light in the room. The restrictions induced by these phenomena are described in some detail. All the improvements are not only available for the characterization of silicon substrates but also for transparent blank substrates and for EUV mask blanks. The additional noise induced by the tranparent substrate is analyzed. The defects, whatever the compoent sizes and the component shapes can be detected. A cross characterization achieved with a commercial tool on silicon substate is reported. Counting measurements performed on EUV blanks are shown. Furthermore, a more explicit definition of added defects is proposed.

  7. Mental Rotation of Dynamic, Three-Dimensional Stimuli by 3-Month-Old Infants

    ERIC Educational Resources Information Center

    Moore, David S.; Johnson, Scott P.

    2011-01-01

    Mental rotation involves transforming a mental image of an object so as to accurately predict how the object would look if it were rotated in space. This study examined mental rotation in male and female 3-month-olds, using the stimuli and paradigm developed by Moore and Johnson (2008). Infants were habituated to a video of a three-dimensional…

  8. Action Experience Alters 3-Month-Old Infants' Perception of Others' Actions

    ERIC Educational Resources Information Center

    Sommerville, J.A.; Woodward, A.L.; Needham, A.

    2005-01-01

    An intervention facilitated 3-month-old infants' apprehension of objects either prior to (reach first), or after (watch first) viewing another person grasp similar objects in a visual habituation procedure. Action experience facilitated action perception: reach-first infants focused on the relation between the actor and her goal, but watch-first…

  9. A Smile Enhances 3-Month-Olds' Recognition of an Individual Face

    ERIC Educational Resources Information Center

    Turati, Chiara; Montirosso, Rosario; Brenna, Viola; Ferrara, Veronica; Borgatti, Renato

    2011-01-01

    Recent studies demonstrated that in adults and children recognition of face identity and facial expression mutually interact (Bate, Haslam, & Hodgson, 2009; Spangler, Schwarzer, Korell, & Maier-Karius, 2010). Here, using a familiarization paradigm, we explored the relation between these processes in early infancy, investigating whether 3-month-old…

  10. The adverse effect of spasticity on 3-month poststroke outcome using a population-based model.

    PubMed

    Belagaje, S R; Lindsell, C; Moomaw, C J; Alwell, K; Flaherty, M L; Woo, D; Dunning, K; Khatri, P; Adeoye, O; Kleindorfer, D; Broderick, J; Kissela, B

    2014-01-01

    Several devices and medications have been used to address poststroke spasticity. Yet, spasticity's impact on outcomes remains controversial. Using data from a cohort of 460 ischemic stroke patients, we previously published a validated multivariable regression model for predicting 3-month modified Rankin Score (mRS) as an indicator of functional outcome. Here, we tested whether including spasticity improved model fit and estimated the effect spasticity had on the outcome. Spasticity was defined by a positive response to the question "Did you have spasticity following your stroke?" on direct interview at 3 months from stroke onset. Patients who had expired by 90 days (n = 30) or did not have spasticity data available (n = 102) were excluded. Spasticity affected the 3-month functional status (β = 0.420, 95 CI = 0.194 to 0.645) after accounting for age, diabetes, leukoaraiosis, and retrospective NIHSS. Using spasticity as a covariable, the model's R (2) changed from 0.599 to 0.622. In our model, the presence of spasticity in the cohort was associated with a worsened 3-month mRS by an average of 0.4 after adjusting for known covariables. This significant adverse effect on functional outcomes adds predictive value beyond previously established factors. PMID:25147752

  11. The Adverse Effect of Spasticity on 3-Month Poststroke Outcome Using a Population-Based Model

    PubMed Central

    Belagaje, S. R.; Lindsell, C.; Moomaw, C. J.; Alwell, K.; Flaherty, M. L.; Woo, D.; Dunning, K.; Khatri, P.; Adeoye, O.; Kleindorfer, D.; Broderick, J.; Kissela, B.

    2014-01-01

    Several devices and medications have been used to address poststroke spasticity. Yet, spasticity's impact on outcomes remains controversial. Using data from a cohort of 460 ischemic stroke patients, we previously published a validated multivariable regression model for predicting 3-month modified Rankin Score (mRS) as an indicator of functional outcome. Here, we tested whether including spasticity improved model fit and estimated the effect spasticity had on the outcome. Spasticity was defined by a positive response to the question “Did you have spasticity following your stroke?” on direct interview at 3 months from stroke onset. Patients who had expired by 90 days (n = 30) or did not have spasticity data available (n = 102) were excluded. Spasticity affected the 3-month functional status (β = 0.420, 95 CI = 0.194 to 0.645) after accounting for age, diabetes, leukoaraiosis, and retrospective NIHSS. Using spasticity as a covariable, the model's R2 changed from 0.599 to 0.622. In our model, the presence of spasticity in the cohort was associated with a worsened 3-month mRS by an average of 0.4 after adjusting for known covariables. This significant adverse effect on functional outcomes adds predictive value beyond previously established factors. PMID:25147752

  12. Stability and Changes in Sleep Regulation: A Longitudinal Study from 3 Months to 3 Years

    ERIC Educational Resources Information Center

    Scher, Anat; Epstein, Rachel; Tirosh, Emmanuel

    2004-01-01

    The goal of the study was to examine the developmental course of sleep consolidation from infancy to preschool. The sleep of 50 healthy infants aged 3 months was recorded, at home, with actigraphs (computerised activity monitors). Follow-up recordings were carried out at 6, 9, 12, 20, and 42 months (due to attrition and occasional technical…

  13. The Face Perception System becomes Species-Specific at 3 Months: An Eye-Tracking Study

    ERIC Educational Resources Information Center

    Di Giorgio, Elisa; Meary, David; Pascalis, Olivier; Simion, Francesca

    2013-01-01

    The current study aimed at investigating own- vs. other-species preferences in 3-month-old infants. The infants' eye movements were recorded during a visual preference paradigm to assess whether they show a preference for own-species faces when contrasted with other-species faces. Human and monkey faces, equated for all low-level perceptual…

  14. Auditory-Visual Context and Memory Retrieval in 3-Month-Old Infants

    ERIC Educational Resources Information Center

    Daman-Wasserman, Michelle; Brennan, Barbara; Radcliffe, Fiona; Prigot, Joyce; Fagen, Jeffrey

    2006-01-01

    In 3 experiments, 3-month-old infants were trained to move an overhead mobile by kicking 1 of their feet in the presence of a distinctive visual (crib bumpers) and auditory (music) context. In Experiment 1A, 5-day but not 1-day retention was disrupted if either or both elements of the context present during the retention test were novel. In…

  15. Patient-reported outcomes 3 months after spine surgery: is it an accurate predictor of 12-month outcome in real-world registry platforms?

    PubMed

    Parker, Scott L; Asher, Anthony L; Godil, Saniya S; Devin, Clinton J; McGirt, Matthew J

    2015-12-01

    OBJECT The health care landscape is rapidly shifting to incentivize quality of care rather than quantity of care. Quality and outcomes registry platforms lie at the center of all emerging evidence-driven reform models and will be used to inform decision makers in health care delivery. Obtaining real-world registry outcomes data from patients 12 months after spine surgery remains a challenge. The authors set out to determine whether 3-month patient-reported outcomes accurately predict 12-month outcomes and, hence, whether 3-month measurement systems suffice to identify effective versus noneffective spine care. METHODS All patients undergoing lumbar spine surgery for degenerative disease at a single medical institution over a 2-year period were enrolled in a prospective longitudinal registry. Patient-reported outcome instruments (numeric rating scale [NRS], Oswestry Disability Index [ODI], 12-Item Short Form Health Survey [SF-12], EQ-5D, and the Zung Self-Rating Depression Scale) were recorded prospectively at baseline and at 3 months and 12 months after surgery. Linear regression was performed to determine the independent association of 3- and 12-month outcome. Receiver operating characteristic (ROC) curve analysis was performed to determine whether improvement in general health state (EQ-5D) and disability (ODI) at 3 months accurately predicted improvement and achievement of minimum clinical important difference (MCID) at 12 months. RESULTS A total of 593 patients undergoing elective lumbar surgery were included in the study. There was a significant correlation between 3-month and 12-month EQ-5D (r = 0.71; p < 0.0001) and ODI (r = 0.70; p < 0.0001); however, the authors observed a sizable discrepancy in achievement of a clinically significant improvement (MCID) threshold at 3 versus 12 months on an individual patient level. For postoperative disability (ODI), 11.5% of patients who achieved an MCID threshold at 3 months dropped below this threshold at 12 months; 10

  16. FSW of Aluminum Tailor Welded Blanks across Machine Platforms

    SciTech Connect

    Hovanski, Yuri; Upadhyay, Piyush; Carlson, Blair; Szymanski, Robert; Luzanski, Tom; Marshall, Dustin

    2015-02-16

    Development and characterization of friction stir welded aluminum tailor welded blanks was successfully carried out on three separate machine platforms. Each was a commercially available, gantry style, multi-axis machine designed specifically for friction stir welding. Weld parameters were developed to support high volume production of dissimilar thickness aluminum tailor welded blanks at speeds of 3 m/min and greater. Parameters originally developed on an ultra-high stiffness servo driven machine where first transferred to a high stiffness servo-hydraulic friction stir welding machine, and subsequently transferred to a purpose built machine designed to accommodate thin sheet aluminum welding. The inherent beam stiffness, bearing compliance, and control system for each machine were distinctly unique, which posed specific challenges in transferring welding parameters across machine platforms. This work documents the challenges imposed by successfully transferring weld parameters from machine to machine, produced from different manufacturers and with unique control systems and interfaces.

  17. Modification methods of blank pistols in Turkey in 2006.

    PubMed

    Saribey, Aylin Yalçin; Tarimci, Celik

    2009-05-01

    This study describes the modification methods of blank cartridge firing pistols in Turkey. We have examined cases submitted to the Aydin Regional Criminal Laboratory of Turkey in 2006. In total, 95 modified pistols and 300 modified cartridges were examined. The blank cartridge firing pistols are guns which look similar to "real" pistols, however, there are blockages in their barrel in order to prevent the discharge of a bullet. However, as a result of simple modifications, these pistols can be easily converted into "real" firearms. Studied modification methods are removing the obstruction from the barrel, removing the partial obstruction from the barrel, sleeving a smaller diameter tube into the original barrel, using a replacement barrel, and rifling the original barrel. Special cartridges for these modified pistols are also produced. These modified pistols and cartridges were evaluated in respect of the converting methods.

  18. Extension of the standard addition method by blank addition.

    PubMed

    Steliopoulos, Panagiotis

    2015-01-01

    Standard addition involves adding varying amounts of the analyte to sample portions of fixed mass or fixed volume and submitting those portions to the sample preparation procedure. After measuring the final extract solutions, the observed signals are linearly regressed on the spiked amounts. The original unknown amount is estimated by the opposite of the abscissa intercept of the fitted straight line [1]. A limitation of this method is that only data points with abscissa values equal to and greater than zero are available so that there is no information on whether linearity holds below the spiking level zero. An approach to overcome this limitation is introduced.•Standard addition is combined with blank addition.•Blank addition means that defined mixtures of blank matrix and sample material are subjected to sample preparation to give final extract solutions.•Equations are presented to estimate the original unknown amount and to calculate the 1-2α confidence interval about this estimate using the combined data set.

  19. Fatal cranial shot by blank cartridge gun: two suicide cases.

    PubMed

    Buyuk, Yalcin; Cagdir, Sadi; Avsar, Abdullah; Duman, Gokce U; Melez, D Oguzhan; Sahin, Feyzi

    2009-08-01

    Blank firing pistols are generally considered to be harmless and these guns are not accepted as being firearms in most countries. Due to lack of legal regulations these guns are easily purchased by anyone aged over 18 years. Reports of serious injuries and even fatalities due to these guns are increasing in the literature. These guns when modified or even unmodified can cause serious and potentially fatal injuries. Without doing any changes to the barrel, using blank or tear gas cartridges, firing at contact range can cause penetration of gas into the body including bone originated from gun powder. We report two suicide cases shooting themselves at temporal region with a blank cartridge gun at contact range. There was no foreign body on radiological examination and there was no trajectory of a bullet inside the brain. In both cases the wound was at the right temporal region and there was defect at temporal bone. There was circular soot around this bone defect. The injury of the brain tissue was localized at the level of the defect but there was widespread subarachnoidal bleeding. We discussed the potential danger of these guns and stressed the need of legal regulations concerning these guns.

  20. Extension of the standard addition method by blank addition

    PubMed Central

    Steliopoulos, Panagiotis

    2015-01-01

    Standard addition involves adding varying amounts of the analyte to sample portions of fixed mass or fixed volume and submitting those portions to the sample preparation procedure. After measuring the final extract solutions, the observed signals are linearly regressed on the spiked amounts. The original unknown amount is estimated by the opposite of the abscissa intercept of the fitted straight line [1]. A limitation of this method is that only data points with abscissa values equal to and greater than zero are available so that there is no information on whether linearity holds below the spiking level zero. An approach to overcome this limitation is introduced.•Standard addition is combined with blank addition.•Blank addition means that defined mixtures of blank matrix and sample material are subjected to sample preparation to give final extract solutions.•Equations are presented to estimate the original unknown amount and to calculate the 1-2α confidence interval about this estimate using the combined data set. PMID:26844210

  1. Pivotal Response Treatment Parent Training for Autism: Findings from a 3-Month Follow-Up Evaluation.

    PubMed

    Gengoux, Grace W; Berquist, Kari L; Salzman, Emma; Schapp, Salena; Phillips, Jennifer M; Frazier, Thomas W; Minjarez, Mendy B; Hardan, Antonio Y

    2015-09-01

    This study's objective was to assess maintenance of treatment effects 3 months after completion of a 12-week Pivotal Response Treatment (PRT) parent education group. Families who completed the active treatment (N = 23) were followed for an additional 12 weeks to measure changes in language and cognitive skills. Results indicated a significant improvement in frequency of functional utterances, with maintenance at 3-month follow-up [F(2, 21): 5.9, p = .009]. Children also made significant gains on the Vineland Communication Domain Standard Score [F(2, 12):11.74, p = .001] and the Mullen Scales of Early Learning Composite score [F(1, 20) = 5.43, p = .03]. These results suggest that a brief PRT parent group intervention can lead to improvements in language and cognitive functioning that are maintained 12 weeks post treatment.

  2. Blunt traumatic infrarenal aortic intimal flap progressing to pseudoaneurysm over 3 months

    PubMed Central

    Carr, John Alfred

    2016-01-01

    Blunt traumatic infrarenal aortic injuries are unusual, and the formation of a delayed pseudoaneurysm of the aorta is even more rare. In this report, a young woman developed a small intimal flap of the infrarenal aorta after a motor vehicle accident which progressed into a 3 cm pseudoaneurysm after 3 months. Operative repair was successful and the patient recovered. This case illustrates the importance of repeat imaging of small blunt aortic injuries since progression can occur. PMID:27252519

  3. In Hospital and 3-Month Mortality and Functional Recovery Rate in Patients Treated for Hip Fracture by a Multidisciplinary Team

    PubMed Central

    Rostagno, Carlo; Buzzi, Roberto; Campanacci, Domenico; Boccacini, Alberto; Cartei, Alessandro; Virgili, Gianni; Belardinelli, Andrea; Matarrese, Daniela; Ungar, Andrea; Rafanelli, Martina; Gusinu, Roberto; Marchionni, Niccolò

    2016-01-01

    Objectives Medical comorbidities affect outcome in elderly patients with hip fracture. This study was designed to preliminarily evaluate the usefulness of a hip-fracture unit led by an internal medicine specialist. Methods In-hospital and 3-month outcomes in patients with hip fracture were prospectively evaluated in 121 consecutive patients assessed before and followed after surgery by a multidisciplinary team led by internal medicine specialist; 337 consecutive patients were recalled from ICD-9 discharge records and considered for comparison regarding in-hospital mortality. Results In the intervention period, patients treated within 48 hours were 54% vs. 26% in the historical cohort (P<0.0001). In-hospital mortality remained stable at about 2.3 per 1000 person-days. At 3 months, 10.3% of discharged patients had died, though less than 8% of patients developed postoperative complications (mainly pneumonia and respiratory failure). The presence of more than 2 major comorbidities and the loss of 3 or more BADL were independent predictors of death. 50/105 patients recovered previous functional capacity, but no independent predictor of functional recovery could be identified. Mean length of hospital stay significantly decreased in comparison to the historical cohort (13.6± 4.7 vs 17 ± 5 days, p = 0.0001). Combined end-point of mortality and length of hospitalization < 12 days was significantly lower in study period (27 vs 34%, p <0.0132). Conclusions Identification and stabilization of concomitant clinical problems by internal medicine specialists may safely decrease time to surgery in frail subjects with hip fracture. Moreover, integrated perioperative clinical management may shorten hospital stay with no apparent increase in in-hospital mortality and ultimately improve the outcome. These results are to be confirmed by a larger study presently ongoing at our institution. PMID:27389193

  4. Observed coparenting and triadic dynamics in African American fragile families at 3 months' postpartum.

    PubMed

    McHale, James P; Coates, Erica E

    2014-01-01

    This report examines coparenting and triadic interactions in 19 unmarried, first-time African American families as fathers, mothers, and 3-month-old infants navigated the Lausanne Trilogue Play (LTP; E. Fivaz-Depeursinge & A. Corboz-Warnery, ). Parents in 10 of the 19 families reported coresidence at the time of the 3-month assessment, and the other 9 sets of coparents lived apart. All participating families had taken part in a prenatal intervention emphasizing the importance of father engagement in children's lives, and in all families, parents reported episodic to regular father contact with the children at 3 months. Analyses of LTP sessions revealed that 9 of the 19 families exhibited high levels of coparenting solidarity-cooperation and family warmth accompanied by low levels of coparenting competition and disengagement. Among the remaining 10 families, competitiveness (verbal sparring, interference) and/or disengagement (repeated, episodic absenting by one or both parents from the ongoing interaction) signaled strain and challenges to solidarity. Differences between the higher and lower solidarity groups were found in father-reported relationship rapport. However, coresidentiality versus noncoresidentiality of the parents did not distinguish high- from low-solidarity groups. A case analysis of one family's triadic session is presented to elucidate the rich potential for clinical intervention in triadic work with fragile family systems. Implications of the study and its findings for theory, research, and clinical work with unmarried fathers and families, along with limits of the study design and generalizability of findings, are discussed.

  5. The Relationship between Gentle Tactile Stimulation on the Fetus and Its Temperament 3 Months after Birth

    PubMed Central

    Wang, Zhe-Wei; Hua, Jing; Xu, Yu-Hong

    2015-01-01

    Objective. The aim of this study was to evaluate the effect of gentle tactile stimulation on the fetus in its temperament 3 months after birth. Method. A total of 302 mother-3-month-infant dyads enrolled the retrospective cohort study. 76 mothers had regular gentle tactile stimulation on the fetus in their pregnancy; 62 mothers had irregular tactile stimulation on the fetus, and the rest of 164 mothers who had no tactile stimulation served as nonexposure group. Temperament was assessed using the EITS (a nine-dimensional scale of temperament). Results. Significant difference in temperament type was found among infants in 3 groups at 3 months of age. In the regular practice group, the babies with easy type temperament accounted for 73.7%, which was higher than that in irregular practice group (53.2%, P = 0.012) and that in the control group (42.1%, P < 0.001). Compared to infants in no practice group, the infants who had received regular gentle tactile stimulation before birth were lower in negative mood (P = 0.047) while higher in adaptability (P < 0.001), approach (P = 0.001), and persistence (P = 0.001), respectively. Conclusion. Regular gentle tactile stimulation on fetus may promote the formation of easy type infant temperament. PMID:26180374

  6. Observed coparenting and triadic dynamics in African American fragile families at 3 months' postpartum.

    PubMed

    McHale, James P; Coates, Erica E

    2014-01-01

    This report examines coparenting and triadic interactions in 19 unmarried, first-time African American families as fathers, mothers, and 3-month-old infants navigated the Lausanne Trilogue Play (LTP; E. Fivaz-Depeursinge & A. Corboz-Warnery, ). Parents in 10 of the 19 families reported coresidence at the time of the 3-month assessment, and the other 9 sets of coparents lived apart. All participating families had taken part in a prenatal intervention emphasizing the importance of father engagement in children's lives, and in all families, parents reported episodic to regular father contact with the children at 3 months. Analyses of LTP sessions revealed that 9 of the 19 families exhibited high levels of coparenting solidarity-cooperation and family warmth accompanied by low levels of coparenting competition and disengagement. Among the remaining 10 families, competitiveness (verbal sparring, interference) and/or disengagement (repeated, episodic absenting by one or both parents from the ongoing interaction) signaled strain and challenges to solidarity. Differences between the higher and lower solidarity groups were found in father-reported relationship rapport. However, coresidentiality versus noncoresidentiality of the parents did not distinguish high- from low-solidarity groups. A case analysis of one family's triadic session is presented to elucidate the rich potential for clinical intervention in triadic work with fragile family systems. Implications of the study and its findings for theory, research, and clinical work with unmarried fathers and families, along with limits of the study design and generalizability of findings, are discussed. PMID:25798494

  7. Review of Trace-Element Field-Blank Data Collected for the California Groundwater Ambient Monitoring and Assessment (GAMA) Program, May 2004-January 2008

    USGS Publications Warehouse

    Olsen, Lisa D.; Fram, Miranda S.; Belitz, Kenneth

    2010-01-01

    Trace-element quality-control samples (for example, source-solution blanks, field blanks, and field replicates) were collected as part of a statewide investigation of groundwater quality in California, known as the Priority Basins Project of the Groundwater Ambient Monitoring and Assessment (GAMA) Program. The GAMA Priority Basins Project is being conducted by the U.S. Geological Survey (USGS) in cooperation with the California State Water Resources Control Board (SWRCB) to assess and monitor the quality of groundwater resources used for drinking-water supply and to improve public knowledge of groundwater quality in California. Trace-element field blanks were collected to evaluate potential bias in the corresponding environmental data. Bias in the environmental data could result from contamination in the field during sample collection, from the groundwater coming into contact with contaminants on equipment surfaces or from other sources, or from processing, shipping, or analyzing the samples. Bias affects the interpretation of environmental data, particularly if any constituents are present solely as a result of extrinsic contamination that would have otherwise been absent from the groundwater that was sampled. Field blanks were collected, analyzed, and reviewed to identify and quantify extrinsic contamination bias. Data derived from source-solution blanks and laboratory quality-control samples also were considered in evaluating potential contamination bias. Eighty-six field-blank samples collected from May 2004 to January 2008 were analyzed for the concentrations of 25 trace elements. Results from these field blanks were used to interpret the data for the 816 samples of untreated groundwater collected over the same period. Constituents analyzed were aluminum (Al), antimony (Sb), arsenic (As), barium (Ba), beryllium (Be), boron (B), cadmium (Cd), chromium (Cr), cobalt (Co), copper (Cu), iron (Fe), lead (Pb), lithium (Li), manganese (Mn), mercury (Hg), molybdenum

  8. Seeing Red and Shooting Blanks: A Study of Red Quasars and Blank Field X-Ray Sources

    NASA Technical Reports Server (NTRS)

    Oliversen, Ronald J. (Technical Monitor); Elvis, Martin

    2004-01-01

    One type of "Blank Field X-ray Source" is now being seen in deep Chandra and XMM-Newton surveys. These are the newly dubbed "XBONGs" (X-ray Bright, Optically Normal Galaxies). The study of the brighter counterparts from ROSAT and XMM- Newton serendipitous surveys is therefore of renewed interest and topicality. We continue to define the properties of the ROSAT sample which is the basis of this grant. We expect to publish the SEDs of these sources soon.

  9. 33 CFR 149.115 - What are the requirements for blank flange and shutoff valves?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... blank flange and shutoff valves? 149.115 Section 149.115 Navigation and Navigable Waters COAST GUARD... EQUIPMENT Pollution Prevention Equipment § 149.115 What are the requirements for blank flange and shutoff valves? Each floating hose string must have a blank flange and a shutoff valve at the vessel's...

  10. Serum Soluble Corin Deficiency Predicts Major Disability within 3 Months after Acute Stroke

    PubMed Central

    Zhu, Fangfang; Shi, Jijun; Han, Xiujie; Zhou, Dan; Zhi, Zhongwen; Zhang, Fuding; Shen, Yun; Ma, Juanjuan; Liu, Chun-Feng

    2016-01-01

    Objective Serum soluble corin has been associated with stroke. However, whether it is associated with stroke prognosis has not yet been studied. Therefore, we aimed to study the association of serum soluble corin with risk of poor outcomes within 3 months after stroke. Methods We followed 522 stroke patients for 3 months to identify major disability, death and vascular events. Serum soluble corin was measured at baseline for all participants. Logistic regression was used to examine the associations of baseline serum soluble corin with outcomes of stroke, adjusting for age, sex, baseline NIHSS score, hours from onset to hospitalization, smoking, drinking, hypertension, diabetes, coronary heart disease, atrial fibrillation, family history of stroke, and stroke subtype. Results Patients with high corin had a significantly lower crude risk for the composite outcome of major disability or death (OR = 0.64, 95%CI: 0.43–0.96) than patients with low corin (the lowest tertile). After adjustment for age and baseline NIHSS score, patients with high corin still had a significantly lower risk for the composite outcome of major disability or death (OR = 0.60, 95%CI: 0.36–0.99). This association became bottom line significant after additionally adjusting for other conventional factors (OR = 0.61, P = 0.058). No association was found between serum soluble corin and other composite outcomes. Conclusion Serum soluble corin deficiency predicted risk for major disability within 3 months after stroke, independent of baseline neurological deficient. Our results may indicate a probable role of corin in stroke prognosis. PMID:27658255

  11. Septic Arthritis in Infants Younger Than 3 Months: A Retrospective Review.

    PubMed

    Bono, Kenneth T; Samora, Julie Balch; Klingele, Kevin E

    2015-09-01

    Septic arthritis in infants is rare and can be difficult to diagnose. This study reviewed a series of patients younger than 3 months to identify factors that may assist in early diagnosis and treatment. A query of records at a large Midwestern pediatric hospital (1994-2010) was performed to identify all patients younger than 3 months at the time of diagnosis. Analysis included birth history, joint involvement, physical examination findings, laboratory results, imaging results, method of treatment, and outcome. In 14 cases (11 boys, 3 girls; mean age at diagnosis, 42.2 days), complete records were available for review. Involved joints included the knee, hip, and shoulder. The most common findings on physical examination were decreased range of motion (100%), tenderness (100%), and swelling (71.4%). Mean temperature was 38.5°C. Mean white blood cell count was 18.5 K/µL, mean erythrocyte sedimentation rate was 48.9 mm/h, and mean C-reactive protein level was 6.1 mg/dL. More than half (57.1%) of joint aspirates grew positive cultures, and 41.7% of blood cultures had positive results. Causative organisms were group B streptococcus, methicillin-sensitive Staphylococcus aureus, Haemophilus influenzae, Streptococcus pneumoniae, Salmonella enterica, and Candida albicans. The most common physical examination findings in infants younger than 3 months with septic arthritis include tenderness, decreased range of motion, and swelling. White blood cell count, C-reactive protein level, and erythrocyte sedimentation rate are likely to be elevated, but these findings should be used in combination with findings on physical examination and radiographic studies to aid in diagnosis.

  12. Press formability YAG laser welded TRIP/DP tailored blanks

    NASA Astrophysics Data System (ADS)

    Nagasaka, A.; Sugimoto, K. I.; Kobayashi, M.; Makii, K.; Ikeda, S.

    2004-06-01

    In the present work, to improve the press formability of the combination of the TRIP steel and ferrite-martensite dual-phase (DP) steel, the mechanical properties and press formability (stretch-formability) of YAG laser welded TRIP/DP tailored blanks were investigated. An as-cold-rolled sheet steel with the chemical composition of (0.1 0.3)C 1.5Si 1.5Mn (mass%) was used in this study. For comparison, 0.14C 0.22Si 1.78Mn (mass%) DP steel was also prepared. The quenched DP steel is called MDP0, and the tempered MDP0 steel is called MDP4. For butt welding, the blank obtained after the heat treatment was cut using a fine cutter, and YAG laser processing equipment was used. The press formability was evaluated from the maximum stretch-height (Hmax). Tensile tests and stretch forming tests have been conducted for laser butt welded joints obtained from the combination of the different steel. The Hmax value of the MDP0 steel was not controlled at the strength level of the DP steel, and was not different from the Hmax value of the MDP4 steel. It is thought that this was assisted to TRIP of the TDP steel because the tensile strength of the TDP steel is consequentially lower than that of the MDP0 steel. High ductility and the high stretch-formability were able to be secured by the high strength TRIP/DP tailored blanks.

  13. Solitary Myofibroma of the Bladder Trigone in a 3-Month-Old Patient: First Case Report

    PubMed Central

    Pensabene, Marco; Siracusa, Fortunato; Rodolico, Vito; Li Voti, Giuseppe; Zambaiti, Elisa; Cimador, Marcello

    2016-01-01

    Visceral solitary myofibromas are uncommon in childhood. We report a case of a solitary asymptomatic visceral myofibroma of the bladder trigone occurring in a 3-month-old boy. Once malignancies were ruled out by cystoscopy, radical excision was performed in order to avoid any potential impairment of bladder dynamic. Postoperative course was uneventful and patient was discharged on day 3 after surgery. After 36 months of follow-up, the patient is toilet-trained and remains well; bladder function is normal. PMID:27242942

  14. Method and apparatus for inspecting an EUV mask blank

    DOEpatents

    Goldberg, Kenneth A.

    2005-11-08

    An apparatus and method for at-wavelength EUV mask-blank characterization for inspection of moderate and low spatial frequency coating uniformity using a synchrotron or other source of EUV light. The apparatus provides for rapid, non-destruction, non-contact, at-wavelength qualification of large mask areas, and can be self-calibrating or be calibrated to well-characterized reference samples. It can further check for spatial variation of mask reflectivity or for global differences among masks. The apparatus and method is particularly suited for inspection of coating uniformity and quality and can detect defects in the order of 50 .mu.m and above.

  15. Automatic classification and accurate size measurement of blank mask defects

    NASA Astrophysics Data System (ADS)

    Bhamidipati, Samir; Paninjath, Sankaranarayanan; Pereira, Mark; Buck, Peter

    2015-07-01

    A blank mask and its preparation stages, such as cleaning or resist coating, play an important role in the eventual yield obtained by using it. Blank mask defects' impact analysis directly depends on the amount of available information such as the number of defects observed, their accurate locations and sizes. Mask usability qualification at the start of the preparation process, is crudely based on number of defects. Similarly, defect information such as size is sought to estimate eventual defect printability on the wafer. Tracking of defect characteristics, specifically size and shape, across multiple stages, can further be indicative of process related information such as cleaning or coating process efficiencies. At the first level, inspection machines address the requirement of defect characterization by detecting and reporting relevant defect information. The analysis of this information though is still largely a manual process. With advancing technology nodes and reducing half-pitch sizes, a large number of defects are observed; and the detailed knowledge associated, make manual defect review process an arduous task, in addition to adding sensitivity to human errors. Cases where defect information reported by inspection machine is not sufficient, mask shops rely on other tools. Use of CDSEM tools is one such option. However, these additional steps translate into increased costs. Calibre NxDAT based MDPAutoClassify tool provides an automated software alternative to the manual defect review process. Working on defect images generated by inspection machines, the tool extracts and reports additional information such as defect location, useful for defect avoidance[4][5]; defect size, useful in estimating defect printability; and, defect nature e.g. particle, scratch, resist void, etc., useful for process monitoring. The tool makes use of smart and elaborate post-processing algorithms to achieve this. Their elaborateness is a consequence of the variety and

  16. Sensitivity Analysis For Determination The Optimal Blank Shape For Hydromechanical Deep Drawing Of Steel Cups

    NASA Astrophysics Data System (ADS)

    Zamani, S. A.; Hossinzade, M.

    2011-08-01

    In the deep drawing of cups, the earing defects are caused by planar anisotropy in the sheet. Several methods have been developed to predicting the optimal blank to avoid the formation of ears. In the deep drawing processes, the use of an optimal blank shape not only saves the material but also it may reduce the occurrence of defects e.g. wrinkling and tearing. In addition, finding the desirable flange contour, eliminate the trimming step in the deep drawing of parts with flange. In this study, a systematic method based on sensitivity analysis has been used to find the optimal blank to obtain a desirable flange contour for a cylindrical cup by hydromechanical deep drawing process. With the aid of a well-known dynamic explicit analysis code ABAQUS; optimum initial blank shape has been obtained. With the predicted optimal blank, both computer simulation and experiment are performed and the effect of blank shape on the some parameters such as thickness distribution and blank holder force during the forming process were investigated. It is shown that formed cup with an optimum blank shape has a better thickness distribution in the both rolled and perpendicular of rolled direction. And it was shown that the blank holder force of modified blank is higher than circular blank.

  17. A randomized controlled trial of brain training with non-action video games in older adults: results of the 3-month follow-up.

    PubMed

    Ballesteros, Soledad; Mayas, Julia; Prieto, Antonio; Toril, Pilar; Pita, Carmen; Laura, Ponce de León; Reales, José M; Waterworth, John A

    2015-01-01

    This randomized controlled study (ClinicalTrials.gov NCT02007616) investigated the maintenance of training effects of 20 1-hr non-action video game training sessions with selected games from a commercial package on several age-declining cognitive functions and subjective wellbeing after a 3-month no-contact period. Two groups of cognitively normal older adults participated in both the post-training (posttest) and the present follow-up study, the experimental group who received training and the control group who attended several meetings with the research team during the study but did not receive training. Groups were similar at baseline on demographics, vocabulary, global cognition, and depression status. Significant improvements in the trained group, and no variation in the control group had been previously found at posttest, in processing speed, attention and visual recognition memory, as well as in two dimensions of subjective wellbeing. In the current study, improvement from baseline to 3 months follow-up was found only in wellbeing (Affection and Assertivity dimensions) in the trained group whereas there was no change in the control group. Previous significant improvements in processing speed, attention and spatial memory become non-significant after the 3-month interval. Training older adults with non-action video games enhanced aspects of cognition just after training but this effect disappeared after a 3-month no-contact follow-up period. Cognitive plasticity can be induced in older adults by training, but to maintain the benefits periodic boosting sessions would be necessary. PMID:25926790

  18. A randomized controlled trial of brain training with non-action video games in older adults: results of the 3-month follow-up

    PubMed Central

    Ballesteros, Soledad; Mayas, Julia; Prieto, Antonio; Toril, Pilar; Pita, Carmen; Laura, Ponce de León; Reales, José M.; Waterworth, John A.

    2015-01-01

    This randomized controlled study (ClinicalTrials.gov NCT02007616) investigated the maintenance of training effects of 20 1-hr non-action video game training sessions with selected games from a commercial package on several age-declining cognitive functions and subjective wellbeing after a 3-month no-contact period. Two groups of cognitively normal older adults participated in both the post-training (posttest) and the present follow-up study, the experimental group who received training and the control group who attended several meetings with the research team during the study but did not receive training. Groups were similar at baseline on demographics, vocabulary, global cognition, and depression status. Significant improvements in the trained group, and no variation in the control group had been previously found at posttest, in processing speed, attention and visual recognition memory, as well as in two dimensions of subjective wellbeing. In the current study, improvement from baseline to 3 months follow-up was found only in wellbeing (Affection and Assertivity dimensions) in the trained group whereas there was no change in the control group. Previous significant improvements in processing speed, attention and spatial memory become non-significant after the 3-month interval. Training older adults with non-action video games enhanced aspects of cognition just after training but this effect disappeared after a 3-month no-contact follow-up period. Cognitive plasticity can be induced in older adults by training, but to maintain the benefits periodic boosting sessions would be necessary. PMID:25926790

  19. Orientation tuning in the visual cortex of 3-month-old human infants.

    PubMed

    Baker, Thomas J; Norcia, Anthony M; Candy, T Rowan

    2011-03-01

    Sensitivity to orientation is critical for making a whole and complete picture of the world. We measured the orientation tuning of mechanisms in the visual cortex of typically developing 3-month-olds and adults using a nonlinear analysis of the two-input steady-state Visually Evoked Potential (VEP). Two gratings, one a fixed test and the other a variable orientation masker were tagged with distinct temporal frequencies and the corresponding evoked responses were measured at the harmonics of the test and masker frequencies and at a frequency equal to the sum of the two stimulus frequencies. The magnitude of the sum frequency component depended strongly on the relative orientation of the test and masker in both infants and adults. The VEP tuning bandwidths of the 3-month-olds measured at the sum frequency were similar to those of adults, suggesting that behavioral immaturities in functions such as orientation discrimination and contour integration may result from other immaturities in long-range lateral projections or feedback mechanisms.

  20. Posterior Urethral Polyp: First Holmium-YAG Laser Ablation on a 3-Month-Old Infant

    PubMed Central

    Keskin, Ercument; Yapanoglu, Turgut; Adanur, Senol; Ziypak, Tevfik; Altay, Mehmet Sefa; Aksoy, Yılmaz

    2016-01-01

    Abstract Background: Urethral polyps are rare benign pathologies seen in the male posterior urethra, more frequently originating from verumontanum. In this article, we aimed to discuss diagnosis and treatment of a urethral polyp causing hematuria and urinary infection in a 3-month-old male infant. This is the first case in the literature in which a urethral polyp is treated with Holmium yttrium-aluminum-garnet (YAG) laser. Case Presentation: The patient was a 3-month-old male infant, and complains were hematuria and crying during micturition. Ultrasonography and voiding cystourethrogram were used for diagnosis. Urethral polyp was observed on urethrocystoscopy. Ablation was performed with a newborn cystoscope. Conclusion: Urethral polyp can cause hematuria and urinary obstruction and should be considered in the differential diagnosis of pathologies such as posterior urethral valve and cecoureterocele that could cause infravesical obstruction. Holmium-YAG laser is a good choice of treatment with easy application possibilities using a newborn cystoscope, especially for newborns and infants who have thin urethra. PMID:27579428

  1. Error modeling for tailored blank laser welding machine

    NASA Astrophysics Data System (ADS)

    Xin, Liming; Xu, Zhigang; Zhao, Mingyang; Zhu, Tianxu

    2008-12-01

    This paper introduces the research on error modeling of tailored blank laser welding machine which has four linear axes. The error models are established based on multi-body system (MBS) theories which are developed in this paper. The number arrays of low-order body are used to describe the topological structures which are taken to generalize and refine MBS, and the characteristic matrices are employed to represent the relative positions and gestures between any two bodies in MBS. Position error associated function which can reflect the influence of each error origin on the positioning error of the machine tool is given to describe transmission error of the machine in detail. Based on this method, the paper puts forward the error model of the tailored blank laser welding machine. The measurement and evaluation of their error parameters start, after complete error modeling of the machine. Leica Laser Tracker is introduced to measure the errors of the machine and to check the result of the error model.

  2. Parental Relationship with Twins from Pregnancy to 3 Months: The Relation Among Parenting Stress, Infant Temperament, and Well-Being

    PubMed Central

    Prino, Laura E.; Rollè, Luca; Sechi, Cristina; Patteri, Luciana; Ambrosoli, Anna; Caldarera, Angela M.; Gerino, Eva; Brustia, Piera

    2016-01-01

    Objective: The transition to parenthood, from pregnancy to postpartum period, is a critical process, particularly for couples expecting twins. There is very little literature regarding the links between anxiety, depression, dyadic adjustment, parental stress, and infant temperament spanning from pregnancy to postpartum. This study has two aims: first, to examine whether mothers’ and fathers’ anxiety, depression, and dyadic adjustment, assessed at the sixth month of pregnancy and 3 months postpartum, are associated with infants’ negative affectivity (NA) and parenting stress; second, to examine whether there is any difference between fathers’ and mothers’ levels of parenting stress and perception of the twins’ temperament, as well as to evaluate, separately for mothers and fathers, whether the levels of parenting stress and perception of child temperament differ for each twin. Method: The study participants were 58 parents (29 couples) and their healthy 58 twin babies (51.7% boys, 48.3% girls). Mothers’ ages ranged from 30 to 44 years, (MAge = 36.3 years, SD = 3.2 years), and fathers’ ages ranged from 32 to 52 years, (MAge = 38.2 years, SD = 4.4 years). The parents, during the pregnancy period and 3 months after delivery, filled out the Edinburgh Postnatal Depression Scale, the State-Trait Anxiety Inventory, and the Dyadic Adjustment Scale. Three months after delivery they also filled out the Parenting Stress Index—Short Form and the Infant Behavior Questionnaire Revised. Results: The analyses showed a significant correlation between parental anxiety/depression symptoms and infants’ NA and parenting stress (in both mothers and fathers). Moreover, compared to fathers, mothers reported higher scores on specific dimensions of the infants’ NA, [t(28) = -2.62 and p < 0.05; t(28) = 2.09 and p < 0.05], and parenting stress, [t(28) = 2.19 and p < 0.05; t(28) = 2.23 and p < 0.05], but only for Twin 2. Finally, the results showed that mothers

  3. Defects caused by blank masks and repair solution with nanomachining for 20nm node

    NASA Astrophysics Data System (ADS)

    Lee, HyeMi; Kim, ByungJu; Kim, MunSik; Jung, HoYong; Kim, Sang Pyo; Yim, DongGyu

    2014-09-01

    As the number of masks per wafer product set is increasing and low k1 lithography requires tight mask specifications, the patterning process below sub 20nm tech. node for critical layers will be much more expensive compared with previous tech. generations. Besides, the improved resolution and the zero defect level are necessary to meet tighter specifications on a mask and these resulted in the increased the blank mask price as well as the mask fabrication cost. Unfortunately, in spite of expensive price of blank masks, the certain number of defects on the blank mask is transformed into the mask defects and its ratio is increased. But using high quality blank mask is not a good idea to avoid defects on the blank mask because the price of a blank mask is proportional to specifications related to defect level. Furthermore, particular defects generated from the specific process during manufacturing a blank mask are detected as a smaller defect than real size by blank inspection tools because of its physical properties. As a result, it is almost impossible to prevent defects caused by blank masks during the mask manufacturing. In this paper, blank defect types which is evolved into mask defects and its unique characteristics are observed. Also, the repair issues are reviewed such as the pattern damage according to the defect types and the repair solution is suggested to satisfy the AIMS (Arial Image Measurement System) specification using a nanomachining tool.

  4. Action experience alters 3-month-old infants’ perception of others’ actions

    PubMed Central

    Sommerville, Jessica A.; Woodward, Amanda L.; Needham, Amy

    2014-01-01

    An intervention facilitated 3-month-old infants’ apprehension of objects either prior to (reach first), or after (watch first) viewing another person grasp similar objects in a visual habituation procedure. Action experience facilitated action perception: reach-first infants focused on the relation between the actor and her goal, but watch-first infants did not. Infants’ sensitivity to the actor’s goal was correlated with their engagement in object-directed contact with the toys. These findings indicate that infants can rapidly form goal-based action representations and suggest a developmental link between infants’ goal directed actions and their ability to detect goals in the actions of others. PMID:15833301

  5. Gastroesophageal Variceal Bleeding as a Complication of Cystic Fibrosis in a 3-Month-Old Patient.

    PubMed

    Motamed, Farzaneh; Fallahi, Gholamhossein; Ahmadi, Faezeh; Bazvand, Fatemeh; Ahmadi, Maedeh; Eftekhari, Kambiz; Rezaei, Nima

    2016-03-01

    Cystic fibrosis (CF) is a hereditary disease of mucous and sweat glands, which affects the respiratory and gastrointestinal systems. Herein, we describe a 3-month-old girl with a history of recurrent episodes of urinary tract infections that required hospitalization. She was referred to our center at the age of three months, with massive gastroesophageal variceal bleeding. In physical examination, she had clubbing, hepatosplenomegaly, and mild ascites. Laboratory studies revealed high serum levels of liver enzymes and low level of Albumin. As of suspicious to CF, sweat tests were performed twice which confirmed the diagnosis of CF. Gastrointestinal bleeding due to gastroesophageal varices is a rare complication of CF, which could result as a consequence of hepatobiliary involvement of disease. Early diagnosis of CF could prevent severe complications and even death in this group of patients. PMID:27107529

  6. Understanding EUV mask blank surface roughness induced LWR and associated roughness requirement

    SciTech Connect

    Yan, Pei-Yang; Zhang, Guojing; Gullickson, Eric M.; Goldberg, Kenneth A.; Benk, Markus P.

    2015-03-01

    Extreme ultraviolet lithography (EUVL) mask multi-layer (ML) blank surface roughness specification historically comes from blank defect inspection tool requirement. Later, new concerns on ML surface roughness induced wafer pattern line width roughness (LWR) arise. In this paper, we have studied wafer level pattern LWR as a function of EUVL mask surface roughness via High-NA Actinic Reticle Review Tool. We found that the blank surface roughness induced LWR at current blank roughness level is in the order of 0.5nm 3σ for NA=0.42 at the best focus. At defocus of ±40nm, the corresponding LWR will be 0.2nm higher. Further reducing EUVL mask blank surface roughness will increase the blank cost with limited benefit in improving the pattern LWR, provided that the intrinsic resist LWR is in the order of 1nm and above.

  7. A New Modelling of Blanking for Thin Sheet in Copper Alloys with Dynamic Recrystallization

    SciTech Connect

    Touache, A.; Thibaud, S.; Chambert, J.; Picart, P.

    2007-05-17

    Precision blanking process is widely used by electronic and micromechanical industries to produce small and thin components in large quantities. To take account of the influence of strain rate and temperature on precision blanking of thin sheet in copper alloys, we have proposed a thermo-elasto-visco-plastic modelling. In addition, dynamic recrystallization takes place in Cual copper alloy during the blanking process of thin sheet. A new modelling of dynamic recrystallization based on the thermodynamics of irreversible processes is presented. Blanking simulations of Cual copper sheet are carried out in order to analyze the softening effect induced by dynamic recrystallization.

  8. A New Modelling of Dynamic Recrystallization - Application to Blanking Process of Thin Sheet in Copper Alloy

    SciTech Connect

    Thibaud, Sebastien; Touache, Abdelhamid; Chambert, Jerome; Picart, Philippe

    2007-04-07

    Blanking process is widely used by electronic and micromechanical industries to produce small and thin components in large quantities. To take into consideration the influence of strain rate and temperature on precision blanking of thin sheet in copper alloy, a thermo-elasto-visco-plastic modelling has been developed. Furthermore the blanking of thin sheet in Cual copper presents dynamic recrystallization. A new modelling of dynamic recrystallization based on the thermodynamics of irreversible processes is proposed. Blanking simulations of Cual copper sheet are performed to analyze the softening effect induced by dynamic recrystallization.

  9. Safety of aerosol tobramycin administration for 3 months to patients with cystic fibrosis.

    PubMed

    Smith, A L; Ramsey, B W; Hedges, D L; Hack, B; Williams-Warren, J; Weber, A; Gore, E J; Redding, G J

    1989-01-01

    To determine the potential toxicity of prolonged aerosol tobramycin administration, 22 patients with cystic fibrosis were monitored while receiving inhaled tobramycin three times a day for 12 weeks. Prior to, four times during administration and approximately 6 weeks after discontinuation of treatment, we assessed pulmonary function, weight, height, body temperature, eighth cranial nerve function, serum creatinine, blood urea nitrogen, urinary creatinine clearance, plasma iothalamate clearance, urinary beta-2 microglobulin concentration, and Pseudomonas aeruginosa density in sputum. There was no detectable laboratory evidence of nephrotoxicity. Neither a decrease in auditory acuity (range 250-20,000 Hz) nor vestibular dysfunction was detected. Pulmonary function tests significantly improved during the first month in all subjects (P less than 0.05) but returned to enrollment values by the end of the 12th week of administration of tobramycin aerosol. Sputum P. aeruginosa density initially decreased from a mean of 10(7) cfu/gm to a mean of 10(4) cfu/gm after 2 weeks of aerosol tobramycin administration and remained significantly below the enrollment value throughout. Coincident with the reduced bacterial density, a reduction in cough frequency and sputum production, as well as a weight gain was observed. Seventy-three percent of the patients with sputum P. aeruginosa isolates susceptible to tobramycin on enrollment yielded resistant organisms during aerosol administration. However, 1 year later all sputum P. aeruginosa isolates obtained from patients were susceptible to tobramycin. We conclude that thrice daily aerosol tobramycin administration for 3 months is not associated with detectable eighth cranial nerve or renal toxicity. Transient emergence of tobramycin resistant P. aeruginosa may occur.

  10. Differential changes in self-reported aspects of interoceptive awareness through 3 months of contemplative training

    PubMed Central

    Bornemann, Boris; Herbert, Beate M.; Mehling, Wolf E.; Singer, Tania

    2015-01-01

    Interoceptive body awareness (IA) is crucial for psychological well-being and plays an important role in many contemplative traditions. However, until recently, standardized self-report measures of IA were scarce, not comprehensive, and the effects of interoceptive training on such measures were largely unknown. The Multidimensional Assessment of Interoceptive Awareness (MAIA) questionnaire measures IA with eight different scales. In the current study, we investigated whether and how these different aspects of IA are influenced by a 3-months contemplative intervention in the context of the ReSource project, in which 148 subjects engaged in daily practices of “Body Scan” and “Breath Meditation.” We developed a German version of the MAIA and tested it in a large and diverse sample (n = 1,076). Internal consistencies were similar to the English version (0.56–0.89), retest reliability was high (rs: 0.66–0.79), and the MAIA showed good convergent and discriminant validity. Importantly, interoceptive training improved five out of eight aspects of IA, compared to a retest control group. Participants with low IA scores at baseline showed the biggest changes. Whereas practice duration only weakly predicted individual differences in change, self-reported liking of the practices and degree of integration into daily life predicted changes on most scales. Interestingly, the magnitude of observed changes varied across scales. The strongest changes were observed for the regulatory aspects of IA, that is, how the body is used for self-regulation in daily life. No significant changes were observed for the Noticing aspect (becoming aware of bodily changes), which is the aspect that is predominantly assessed in other IA measures. This differential pattern underscores the importance to assess IA multi-dimensionally, particularly when interested in enhancement of IA through contemplative practice or other mind–body interventions. PMID:25610410

  11. Numerical and experimental investigations into Tailored Welded Blanks formability

    SciTech Connect

    Gaied, Sadok; Balabane, Mikhael

    2007-05-17

    A Tailor welded blank (TWB) technology gives automotive designers the ability to selectively vary body panel thickness and alloy to optimize the use of material. TWBs offer several notable benefits including decreased part weight, reduced manufacturing costs, increased environmental friendliness, and improved dimensional consistency. In order to take advantage of these benefits, however, designers need to overcome the formability of TWBs and be able to accurately predict unique characteristics related to TWB forming early in the design process. In this paper, a numerical model to predict the forming height dome and a specific forming curve of TWBs is presented. Finite element analyses of standard TWB forming tests (Nakazima) were performed in Arcelor Mittal Auto Application Research Center to determine the interaction between the weaker and the stronger materials. To measure the critical strain at necking a numerical method is used. A comparison of numerical and experimental results highlights a good agreement. The numerical approach offers a considerable gain to obtain specific FLC for all configurations.

  12. Mind-blanking: when the mind goes away

    PubMed Central

    Ward, Adrian F.; Wegner, Daniel M.

    2013-01-01

    People often feel like their minds and their bodies are in different places. Far from an exotic experience, this phenomenon seems to be a ubiquitous facet of human life (e.g., Killingsworth and Gilbert, 2010). Many times, people's minds seem to go “somewhere else”—attention becomes disconnected from perception, and people's minds wander to times and places removed from the current environment (e.g., Schooler et al., 2004). At other times, however, people's minds may seem to go nowhere at all—they simply disappear. This mental state—mind-blanking—may represent an extreme decoupling of perception and attention, one in which attention fails to bring any stimuli into conscious awareness. In the present research, we outline the properties of mind-blanking, differentiating this mental state from other mental states in terms of phenomenological experience, behavioral outcomes, and underlying cognitive processes. Seven experiments suggest that when the mind seems to disappear, there are times when we have simply failed to monitor its whereabouts—and there are times when it is actually gone. PMID:24098287

  13. Optimisation of the blank shape for micro deep drawing of rectangular parts

    SciTech Connect

    Hu Zhenyu; Vollertsen, Frank

    2011-05-04

    In this investigation the blank shape for micro deep drawing of rectangular parts was for the first time optimized using FEM method with consideration of the real process conditions in micro forming, i.e. the coefficient of friction and the flow curves of thin foils. The acquired optimized blank shape was then validated by applying it to experiments. For both numerical and experimental investigations a punch with a section of 2x1 mm{sup 2} was used. Aluminum Al99.5 with a sheet thickness of 20 {mu}m was used as blank material in this investigation. A flange free drawn part was successfully obtained from experiment using the blank shape and blank holder force optimized using FEM.

  14. Prescription patterns of analgesics in the last 3 months of life: a retrospective analysis of 10202 lung cancer patients

    PubMed Central

    Gao, W; Gulliford, M; Higginson, I J

    2011-01-01

    Background: To describe the prescription patterns of analgesics during the last 3 months of life in lung cancer and to determine the associated factors. Methods: Data on lung cancer patients (N=10 202) who died during 2000–2008 were extracted from the General Practice Research Database (GPRD). This database records prescriptions of patients received from UK general practices (GP), but not those from non-GP routes. Prescription prevalences were estimated. The associated factors were investigated using log-binomial regression. Results: The overall prescription prevalences were 50.4% (95% confidence interval (CI): 49.4–51.4%) for level 1 (e.g., paracetamol), 34.1% (95% CI: 33.2–35.0%) for level 2 (weak opioids), and 55.5 % (95% CI: 54.5–56.4%) for level 3 analgesics (strong opioids). Prescription prevalence of analgesics of all levels showed an increasing trend over the period 2000–2008 (annual increases range: 1.1–1.5%) but a decreasing trend with age (average decrease per group range: −5.8 to −1.8%). Patients in the older age groups were less likely to be prescribed level 3 analgesics than those in the younger age groups (PR‘90+' vs ‘<50'=0.55 (95% CI: 0.45–0.67); PR‘80−89' vs ‘<50'=0.73 (95% CI: 0.66–0.79); PR‘70−79' vs ‘<50'=0.84 (95% CI: 0.77–0.90)). Conclusion: Analgesics have been increasingly prescribed in lung cancer. However, analgesics, especially at level 3, were relatively under-prescribed to people older than 70 years, warranting further investigation. PMID:21540860

  15. Critical appraisal of 3-monthly paliperidone depot injections in the treatment of schizophrenia

    PubMed Central

    Carpiniello, Bernardo; Pinna, Federica

    2016-01-01

    Aims Three-monthly injections of paliperidone palmitate (PP-3M) represent a new and recently introduced long-acting antipsychotic therapeutic option. This review focuses on available data relating to the efficacy and safety of PP-3M and its position in the current therapeutic scenario. Method An analysis of PubMed, Scopus, and ISI Web of Knowledge databases was conducted, and all available papers on PP-3M, including poster presentations, were selected and considered for the purpose of the present review. Findings: to date, three full papers have been published, the first, a Phase 1 randomized, open label study investigating the pharmacokinetics, safety, and tolerability of the drug; the second, a Phase 3 double blind study vs placebo focusing on efficacy and tolerability; and the last relating to the practical use of PP-3M. The five posters identified describe data reported in the above-cited papers. Overall, the pharmacokinetic findings obtained in these studies highlight the feasibility of administering PP-3M on a 3-monthly basis, subsequent to the administration of four 1-monthly injections of PP at doses 3.5 times higher than the stabilized dose of 1-monthly injections of PP (ie, 175, 300, 450, and 525 mgs). The published studies highlight a significantly longer time to relapse compared to placebo, and significantly better results compared to placebo for all secondary end-points (Positive and Negative Syndrome Scale, Clinical Global Impression-Severity Scale, Personal and Social Performance Scale scores), in addition to reasonably good safety and tolerability profiles. Conclusion PP-3M emerges as a potential candidate for use as a first-line long-acting agent in the maintenance treatment of patients with schizophrenia. Further studies should however be conducted to confirm this expectation. In view of its efficacy, tolerability, and safety, together with the longer timespan between injections, PP-3M currently represents one of the best available options, and

  16. Low-defect reflective mask blanks for extreme ultraviolet lithography

    SciTech Connect

    Burkhart, S C; Cerjarn, C; Kearney, P; Mirkarimi, P; Walton, C; Ray-Chaudhuri, A

    1999-03-11

    Extreme Ultraviolet Lithgraphy (EUVL) is an emerging technology for fabrication of sub-100 nm feature sizes on silicon, following the SIA roadmap well into the 21st century. The specific EUVL system described is a scanned, projection lithography system with a 4:1 reduction, using a laser plasma EUV source. The mask and all of the system optics are reflective, multilayer mirrors which function in the extreme ultraviolet at 13.4 nm wavelength. Since the masks are imaged to the wafer exposure plane, mask defects greater than 80% of the exposure plane CD (for 4:1 reduction) will in many cases render the mask useless, whereas intervening optics can have defects which are not a printing problem. For the 100 nm node, we must reduce defects to less than 0.01/cm² @ 80nm or larger to obtain acceptable mask production yields. We have succeeded in reducing the defects to less than 0.1/cm² for defects larger than 130 nm detected by visible light inspection tools, however our program goal is to achieve 0.01/cm² in the near future. More importantly though, we plan to have a detailed understanding of defect origination and the effect on multilayer growth in order to mitigate defects below the 10-2/cm² level on the next generation of mask blank deposition systems. In this paper we will discuss issues and results from the ion-beam multilayer deposition tool, details of the defect detection and characterization facility, and progress on defect printability modeling.

  17. Detectability and printability of EUVL mask blank defects for the32 nm HP node

    SciTech Connect

    Cho, Wonil; Han, Hak-Seung; Goldberg, Kenneth A.; Kearney,Patrick A.; Jeon, Chan-Uk

    2007-08-01

    The readiness of a defect-free extreme ultraviolet lithography (EUVL) mask blank infrastructure is one of the main enablers for the insertion of EUVL technology into production. It is essential to have sufficient defect detection capability and understanding of defect printability to develop a defect-free EUVL mask blank infrastructure. The SEMATECH Mask Blank Development Center (MBDC) has been developing EUVL mask blanks with low defect densities with the Lasertec M1350 and M7360, the 1st and 2nd generations, respectively, of visible light EUVL mask blank inspection tools. Although the M7360 represents a significant improvement in our defect detection capability, it is time to start developing a 3rd generation tool for EUVL mask blank inspection. The goal of this tool is to detect all printable defects; therefore, understanding defect printability criteria is critical to this tool development. In this paper, we will investigate the defect detectability of a 2nd generation blank inspection tool and a patterned EUVL mask inspection tool. We will also compare the ability of the inspection tools to detect programmed defects whose printability has been estimated from wafer printing results and actinic aerial images results.

  18. Visit-to-Visit Variability and Reduction in Blood Pressure After a 3-Month Cardiac Rehabilitation Program in Patients With Cardiovascular Disease.

    PubMed

    Ishida, Toshihisa; Miura, Shin-Ichiro; Fujimi, Kanta; Ueda, Takashi; Ueda, Yoko; Matsuda, Takuro; Sakamoto, Maaya; Arimura, Tadaaki; Shiga, Yuhei; Kitajima, Ken; Saku, Keijiro

    2016-09-28

    Visit-to-visit variability (VVV) in blood pressure (BP) has been shown to be a predictor of cardiovascular events. It is unknown whether CR can improve VVV in BP as well as reducing BP. We enrolled 84 patients who had cardiovascular disease (CVD) and participated in a 3-month CR program. We measured systolic and diastolic BP (SBP and DBP), pulse pressure (PP), and heart rate (HR) before exercise training at each visit and determined VVV in BP or HR expressed as the standard deviation of the average BP or HR. Patients who had uncontrolled BP at baseline and who did not change their antihypertensive drugs throughout the study period showed a significant reduction of both SBP and DBP with a decrease in PP after 3 months. Patients who did not change their antihypertensive drugs were divided into larger (L-) and smaller (S-) VVV in the SBP groups and L- and S-VVV in the DBP groups according to the average value of VVV in SBP or DBP. In the L-VVV in the SBP and DBP groups, VVV in SBP and DBP in the 1st month was significantly decreased after the 3rd month in both groups. HR at baseline was significantly decreased after 3 months. In addition, CR induced a significant increase in the level of high-density lipoprotein cholesterol (HDL-C) in blood. In conclusion, CR improved VVV in BP in patients with L-VVV in BP and evoked a significant reduction in HR and an increase in HDL-C. These effects due to the CR program may be cardioprotective.

  19. Foil Blanking Mechanism Research Using Rubber Tool by Finite Element Simulation and Experiment

    NASA Astrophysics Data System (ADS)

    Chen, Yang-Kai; Li, Xiao-Xing; Lang, Li-Hui; Xiao, Rui; Ge, Yu-Long

    2016-08-01

    For foil blanking process, the usage of flexible tool can effectively reduce the requirement of the manufacturing and assembling precision, compared with using conventional tool. However, the blanking mechanism using rubber tool is not clear. To investigate this question, the Finite Element (FE) model of rubber and process is established using ABAQUS package. The result of FE simulation affirm that the fracture emerges as a result of shear, not tensile. Then, for titanium foil with 0.08mm thickness, the cutting experiment is executed to verify the validity of blanking mechanism and FE simulation.

  20. Prediction of glycated hemoglobin levels at 3 months after metabolic surgery based on the 7-day plasma metabolic profile.

    PubMed

    Kwon, Hyuk Nam; Lee, Yeon Ji; Kang, Ju-Hee; Choi, Ji-Ho; An, Yong Jin; Kang, Sunmi; Lee, Dae Hyun; Suh, Young Ju; Heo, Yoonseok; Park, Sunghyouk

    2014-01-01

    Metabolic surgery has been shown to provide better glycemic control for type 2 diabetes than conventional therapies. Still, the outcomes of the surgery are variable, and prognostic markers reflecting the metabolic changes by the surgery are yet to be established. NMR-based plasma metabolomics followed by multivariate regression was used to test the correlation between the metabolomic profile at 7-days after surgery and glycated hemoglobin (HbA1c) levels at 3-months (and up to 12 months with less patients), and to identify the relevant markers. Metabolomic profiles at 7-days could differentiate the patients according to the HbA1c improvement status at 3-months. The HbA1c values were predicted based on the metabolomics profile with partial least square regression, and found to be correlated with the observed values. Metabolite analysis suggested that 3-Hydroxybutyrate (3-HB) and glucose contributes to this prediction, and the [3-HB]/[glucose] exhibited a modest to good correlation with the HbA1c level at 3-months. The prediction of 3-month HbA1c using 7-day metabolomic profile and the suggested new criterion [3-HB]/[glucose] could augment current prognostic modalities and help clinicians decide if drug therapy is necessary.

  1. Holistic Face Processing in Newborns, 3-Month-Old Infants, and Adults: Evidence from the Composite Face Effect

    ERIC Educational Resources Information Center

    Turati, Chiara; Di Giorgio, Elisa; Bardi, Lara; Simion, Francesca

    2010-01-01

    Holistic face processing was investigated in newborns, 3-month-old infants, and adults through a modified version of the composite face paradigm and the recording of eye movements. After familiarization to the top portion of a face, participants (N = 70) were shown 2 aligned or misaligned faces, 1 of which comprised the familiar top part. In the…

  2. Externally Contingent and Unstable Self-Worth as Predictors of Depression in College Women: A 3-Month Study

    ERIC Educational Resources Information Center

    Lopez, Frederick G.; Thorne, Brittany; Schoenecker, Sydney; Siffert, Kevin; Chaliman, Rebecca; Castleberry, Erica

    2014-01-01

    Undergraduate women completed measures of externally contingent self-worth, self-esteem instability, and depression at the beginning (Time 1) and again 3 months later near the end (Time 2) of an academic semester. Findings indicated that when Time 1 depression scores were controlled for, each Time 1 facet of self-esteem made significant…

  3. Positive, but Not Negative, Facial Expressions Facilitate 3-Month-Olds' Recognition of an Individual Face

    ERIC Educational Resources Information Center

    Brenna, Viola; Proietti, Valentina; Montirosso, Rosario; Turati, Chiara

    2013-01-01

    The current study examined whether and how the presence of a positive or a negative emotional expression may affect the face recognition process at 3 months of age. Using a familiarization procedure, Experiment 1 demonstrated that positive (i.e., happiness), but not negative (i.e., fear and anger) facial expressions facilitate infants'…

  4. Prediction of Glycated Hemoglobin Levels at 3 Months after Metabolic Surgery Based on the 7-Day Plasma Metabolic Profile

    PubMed Central

    Choi, Ji-ho; An, Yong Jin; Kang, Sunmi; Lee, Dae Hyun; Suh, Young Ju; Heo, Yoonseok; Park, Sunghyouk

    2014-01-01

    Metabolic surgery has been shown to provide better glycemic control for type 2 diabetes than conventional therapies. Still, the outcomes of the surgery are variable, and prognostic markers reflecting the metabolic changes by the surgery are yet to be established. NMR-based plasma metabolomics followed by multivariate regression was used to test the correlation between the metabolomic profile at 7-days after surgery and glycated hemoglobin (HbA1c) levels at 3-months (and up to 12 months with less patients), and to identify the relevant markers. Metabolomic profiles at 7-days could differentiate the patients according to the HbA1c improvement status at 3-months. The HbA1c values were predicted based on the metabolomics profile with partial least square regression, and found to be correlated with the observed values. Metabolite analysis suggested that 3-Hydroxybutyrate (3-HB) and glucose contributes to this prediction, and the [3-HB]/[glucose] exhibited a modest to good correlation with the HbA1c level at 3-months. The prediction of 3-month HbA1c using 7-day metabolomic profile and the suggested new criterion [3-HB]/[glucose] could augment current prognostic modalities and help clinicians decide if drug therapy is necessary. PMID:25384027

  5. Recognition of Faces and Greebles in 3-Month-Old Infants: Influence of Temperament and Cognitive Abilities

    ERIC Educational Resources Information Center

    Spangler, Sibylle M.; Freitag, Claudia; Schwarzer, Gudrun; Vierhaus, Marc; Teubert, Manuel; Lamm, Bettina; Kolling, Thorsten; Graf, Frauke; Goertz, Claudia; Fassbender, Ina; Lohaus, Arnold; Knopf, Monika; Keller, Heidi

    2011-01-01

    The aim of the present study was to investigate whether temperament and cognitive abilities are related to recognition performance of Caucasian and African faces and of a nonfacial stimulus class, Greebles. Seventy Caucasian infants were tested at 3 months with a habituation/dishabituation paradigm and their temperament and cognitive abilities…

  6. Infants' Vocal Engagement Oriented towards Mother versus Stranger at 3 Months and Avoidant Attachment Behavior at 12 Months

    ERIC Educational Resources Information Center

    Volker, Susanne

    2007-01-01

    The aim of the present study was to demonstrate that mother avoidance in infants at the age of 12 months can be predicted by the infants' differential vocal engagement to mother versus a female stranger at the age of 3 months. Differential engagement in favor of the mother was supposed to relate to low future avoidance. The vocal behavior of 26…

  7. Lown-Ganong-Levine syndrome in a 3-month-old infant with isolated left ventricular noncompaction.

    PubMed

    Shabanian, Reza; Kiani, Abdolrazagh; Rad, Elaheh Malakan; Eslamiyeh, Hosein

    2010-02-01

    This report describes a 3-month-old boy with isolated left ventricular noncompaction admitted to a medical facility due to heart failure and dysrhythmia. His electrocardiogram showed a short PR interval and a normal QRS complex after abortion of supraventricular tachycardia in favor of Lown-Ganong-Levine syndrome or enhanced atrioventricular nodal conduction.

  8. Numerical and experimental analysis on the formability of tailor welded blanks based on digital image correlation

    NASA Astrophysics Data System (ADS)

    Li, Yanhua; Lin, Jianping; Guo, Ruiquan

    2013-12-01

    Formability of tailor welded blanks (TWBs) and control of blank deformation during stamping is always a challenge for manufacturing designers due to different properties or thicknesses of the blanks. The plastic deformation capacity of TWBs is reduced even when the material and thickness are the same. Same material same gauge TWBs (SMSG- TWBs) are now widely applied to mass production of automobile components for raising the utilization ratio of materials and expanding the dimension of steel coil. The aim of this work is to investigate the formability of SMSG-TWBs by both numerical and experimental approaches. Local constitutive properties of laser welded beads are determined by tensile tests with the aid of digital image correlation (DIC). Based on these mechanical properties, the formability of TWBs and monolithic blank are evaluated by performing Erichsen cupping tests numerically and experimentally. The influence of weld on strain distribution is discussed as well. Comparisons with the experimental results showed general agreement.

  9. Investigation Of Tailored Blank Production By The Process Class Sheet-Bulk Metal Forming

    NASA Astrophysics Data System (ADS)

    Merklein, M.; Opel, S.

    2011-01-01

    Nowadays efforts are made to improve sheet metal manufacturing processes and forming capability. Functional sheet metal components, for example toothed synchronizer rings, show closely-tolerated complex geometric features, especially in the automotive industry. Unfortunately sheet metal forming operations do not offer the possibility for complex shapes as do for example cutting technologies [1]. To avoid this restriction, the usage of semi-finished products with a material pre-distribution in the blank is investigated. So-called tailored blanks are usually made of different materials or sheet thicknesses. A common way of joining diverse blanks is welding [2]. In most cases the joining has a significant influence on the consecutively forming process due to varying local mechanical properties [3]. Hence the manufacturing of tailored blanks with a defined sheet thickness characteristic by the process class "sheet-bulk metal forming" is investigated. Subsequent the tailored blanks are provided for forming operations such as deep-drawing and the direct forming of complex functional shape elements. Aim of the project is the manufacturing of circular blanks with a sheet thickening in the exterior area by an upsetting operation. At the beginning, FE-based studies and physical experiments using blanks of DC04 are carried out, to create a fundamental knowledge base of the forming process. A comparatively large contact area between blank and forming tool, a three-dimensional material flow and the low sheet thickness cause high process forces. Building up a multi-stage upsetting process with different sequenced tool geometries is one approach to meet this challenge. The material flow out of the sheet center is realized step-by-step to lower the actual contact area and sequential the appearing forces.

  10. Evaluation of volatile organic compound (VOC) blank data and application of study reporting levels to groundwater data collected for the California GAMA Priority Basin Project, May 2004 through September 2010

    USGS Publications Warehouse

    Fram, Miranda S.; Olsen, Lisa D.; Belitz, Kenneth

    2012-01-01

    Volatile organic compounds (VOCs) were analyzed in quality-control samples collected for the California Groundwater Ambient Monitoring and Assessment (GAMA) Program Priority Basin Project. From May 2004 through September 2010, a total of 2,026 groundwater samples, 211 field blanks, and 109 source-solution blanks were collected and analyzed for concentrations of 85 VOCs. Results from analyses of these field and source-solution blanks and of 2,411 laboratory instrument blanks during the same time period were used to assess the quality of data for the 2,026 groundwater samples. Eighteen VOCs were detected in field blanks or source-solution blanks: acetone, benzene, bromodichloromethane, 2-butanone, carbon disulfide, chloroform, 1,1-dichloroethene, dichloromethane, ethylbenzene, tetrachloroethene, styrene, tetrahydrofuran, toluene, trichloroethene, trichlorofluoromethane, 1,2,4-trimethylbenzene, m- and p-xylenes, and o-xylene. The objective of the evaluation of the VOC-blank data was to determine if study reporting levels (SRLs) were needed for any of the VOCs detected in blanks to ensure the quality of the data from groundwater samples. An SRL is equivalent to a raised reporting level that is used in place of the reporting level used by the analyzing laboratory [long‑term method detection level (LT-MDL) or laboratory reporting level (LRL)] to reduce the probability of reporting false-positive detections. Evaluation of VOC-blank data was done in three stages: (1) identification of a set of representative quality‑control field blanks (QCFBs) to be used for calculation of SRLs and identification of VOCs amenable to the SRL approach, (2) evaluation of potential sources of contamination to blanks and groundwater samples by VOCs detected in field blanks, and (3) selection of appropriate SRLs from among four potential SRLs for VOCs detected in field blanks and application of those SRLs to the groundwater data. An important conclusion from this study is that to ensure the

  11. Inadequacy of 3-month Oswestry Disability Index outcome for assessing individual longer-term patient experience after lumbar spine surgery.

    PubMed

    Asher, Anthony L; Chotai, Silky; Devin, Clinton J; Speroff, Theodore; Harrell, Frank E; Nian, Hui; Dittus, Robert S; Mummaneni, Praveen V; Knightly, John J; Glassman, Steven D; Bydon, Mohamad; Archer, Kristin R; Foley, Kevin T; McGirt, Matthew J

    2016-08-01

    OBJECTIVE Prospective longitudinal outcomes registries are at the center of evidence-driven health care reform. Obtaining real-world outcomes data at 12 months can be costly and challenging. In the present study, the authors analyzed whether 3-month outcome measurements sufficiently represent 12-month outcomes for patients with degenerative lumbar disease undergoing surgery. METHODS Data from 3073 patients undergoing elective spine surgery for degenerative lumbar disease were entered into a prospective multicenter registry (N(2)QOD). Baseline, 3-month, and 12-month follow-up Oswestry Disability Index (ODI) scores were recorded. The absolute differences between actual 12- and 3-month ODI scores was evaluated. Additionally, the authors analyzed the absolute difference between actual 12-month ODI scores and a model-predicted 12-month ODI score (the model used patients' baseline characteristics and actual 3-month scores). The minimal clinically important difference (MCID) for ODI of 12.8 points and the substantial clinical benefit (SCB) for ODI of 18.8 points were used based on the previously published values. The concordance rate of achieving MCID and SCB for ODI at 3-and 12-months was computed. RESULTS The 3-month ODI scores differed from 12-month scores by an absolute difference of 11.9 ± 10.8, and predictive modeling estimations of 12-month ODI scores differed from actual 12-month scores by a mean (± SD) of 10.7 ± 9.0 points (p = 0.001). Sixty-four percent of patients (n = 1982) achieved an MCID for ODI at 3 months in comparison with 67% of patients (n = 2088) by 12 months; 51% (n = 1731) and 61% (n = 1860) of patients achieved SCB for ODI at 3 months and 12 months, respectively. Almost 20% of patients had ODI scores that varied at least 20 points (the point span of an ODI functional category) between actual 3- and 12-month values. In the aggregate analysis of achieving MCID, 77% of patients were concordant and 23% were discordant in achieving or not achieving

  12. Inadequacy of 3-month Oswestry Disability Index outcome for assessing individual longer-term patient experience after lumbar spine surgery.

    PubMed

    Asher, Anthony L; Chotai, Silky; Devin, Clinton J; Speroff, Theodore; Harrell, Frank E; Nian, Hui; Dittus, Robert S; Mummaneni, Praveen V; Knightly, John J; Glassman, Steven D; Bydon, Mohamad; Archer, Kristin R; Foley, Kevin T; McGirt, Matthew J

    2016-08-01

    OBJECTIVE Prospective longitudinal outcomes registries are at the center of evidence-driven health care reform. Obtaining real-world outcomes data at 12 months can be costly and challenging. In the present study, the authors analyzed whether 3-month outcome measurements sufficiently represent 12-month outcomes for patients with degenerative lumbar disease undergoing surgery. METHODS Data from 3073 patients undergoing elective spine surgery for degenerative lumbar disease were entered into a prospective multicenter registry (N(2)QOD). Baseline, 3-month, and 12-month follow-up Oswestry Disability Index (ODI) scores were recorded. The absolute differences between actual 12- and 3-month ODI scores was evaluated. Additionally, the authors analyzed the absolute difference between actual 12-month ODI scores and a model-predicted 12-month ODI score (the model used patients' baseline characteristics and actual 3-month scores). The minimal clinically important difference (MCID) for ODI of 12.8 points and the substantial clinical benefit (SCB) for ODI of 18.8 points were used based on the previously published values. The concordance rate of achieving MCID and SCB for ODI at 3-and 12-months was computed. RESULTS The 3-month ODI scores differed from 12-month scores by an absolute difference of 11.9 ± 10.8, and predictive modeling estimations of 12-month ODI scores differed from actual 12-month scores by a mean (± SD) of 10.7 ± 9.0 points (p = 0.001). Sixty-four percent of patients (n = 1982) achieved an MCID for ODI at 3 months in comparison with 67% of patients (n = 2088) by 12 months; 51% (n = 1731) and 61% (n = 1860) of patients achieved SCB for ODI at 3 months and 12 months, respectively. Almost 20% of patients had ODI scores that varied at least 20 points (the point span of an ODI functional category) between actual 3- and 12-month values. In the aggregate analysis of achieving MCID, 77% of patients were concordant and 23% were discordant in achieving or not achieving

  13. Chewing nicotine gum for 3 months: what happens to plasma nicotine levels?

    PubMed Central

    McNabb, M E

    1984-01-01

    Techniques that help patients stop smoking should also reduce their exposure to agents such as nicotine. The mean plasma nicotine levels in 50 subjects while they were still smoking and then while they were chewing pieces of gum containing either 2 or 4 mg of nicotine over a 12-week period of abstinence were 35, 9 and 23 ng/mL (217, 56 and 143 nmol/L) respectively. A small number of subjects given an unlimited supply of gum used 14 to 24 pieces of 4-mg gum daily and had plasma nicotine levels exceeding the levels achieved while smoking. There were no acute symptoms necessitating medical intervention associated with these excessive levels. Side effects were uncommon and usually controllable. When simple dosage rules are followed people who chew nicotine gum for a few months to stop smoking lower their exposure to nicotine. PMID:6478344

  14. Improvement of total quality on EUV mask blanks toward volume production

    NASA Astrophysics Data System (ADS)

    Shoki, Tsutomu; Mitsui, Masaru; Sakamoto, Minoru; Sakaya, Noriyuki; Ootsuka, Masato; Asakawa, Tasuto; Yamada, Takeyuki; Mitsui, Hideaki

    2010-04-01

    Total quality on EUV mask blanks have to be improved toward future volume production. In this paper, progress in EUV blank development and improvement in flatness, bow and ML blank defects as critical issues on EUV blanks were reported. Steadily progress in flatness improvement was made in the past five years by improving polishing processes. A LTE substrate with a high flatness of 78 nm PV in 142 mm square area was achieved in average. Annealing process was developed to make small bow of less than 600 nm after ML coating. It was confirmed that annealed ML blank has stable performance in bow and centroid wavelength values through mask making process. Small bow of less than 300 nm was successfully demonstrated using annealing process and a CrN back side film with high compressive stress. Low defects of 0.05 defects/cm2 at 70 nm SiO2 sensitivity inspected by a Lasertec M1350 was demonstrated on a multilayer (ML) blank with a LTE substrate as best. Small defects over 50 nm in a M7360 were effectively reduced by improvement of polishing process consisting of local polish, touch polish and cleaning.

  15. High-speed blanking of copper alloy sheets: Material modeling and simulation

    NASA Astrophysics Data System (ADS)

    Husson, Ch.; Ahzi, S.; Daridon, L.

    2006-08-01

    To optimize the blanking process of thin copper sheets ( ≈ 1. mm thickness), it is necessary to study the influence of the process parameters such as the punch-die clearance and the wear of the punch and the die. For high stroke rates, the strain rate developed in the work-piece can be very high. Therefore, the material modeling must include the dynamic effects.For the modeling part, we propose an elastic-viscoplastic material model combined with a non-linear isotropic damage evolution law based on the theory of the continuum damage mechanics. Our proposed modeling is valid for a wide range of strain rates and temperatures. Finite Element simulations, using the commercial code ABAQUS/Explicit, of the blanking process are then conducted and the results are compared to the experimental investigations. The predicted cut edge of the blanked part and the punch-force displacement curves are discussed as function of the process parameters. The evolution of the shape errors (roll-over depth, fracture depth, shearing depth, and burr formation) as function of the punch-die clearance, the punch and the die wear, and the contact punch/die/blank-holder are presented. A discussion on the different stages of the blanking process as function of the processing parameters is given. The predicted results of the blanking dependence on strain-rate and temperature using our modeling are presented (for the plasticity and damage). The comparison our model results with the experimental ones shows a good agreement.

  16. Estimation of Thermal Contact Conductance between Blank and Tool Surface in Hot Stamping Process

    NASA Astrophysics Data System (ADS)

    Taha, Zahari; Hanafiah Shaharudin, M. A.

    2016-02-01

    In hot stamping, the determination of the thermal contact conductance values between the blank and tool surface during the process is crucial for the purpose of simulating the blank rapid cooling inside the tool using finite element analysis (FEA). The thermal contact conductance value represents the coefficient of the heat transfer at the surface of two solid bodies in contact and is known to be influenced greatly by the applied pressure. In order to estimate the value and its dependency on applied pressure, the process of hot stamping was replicated and simplified into a process of compression of heated flat blank in between the tool at different applied pressure. The temperature of the blank and tool surface were measured by means of thermocouples installed inside the tool. Based on the measured temperature, the thermal contact conductance between the surfaces was calculated using Newton's cooling law equation. The calculated value was then used to simulate the blank cooling inside the tool using FEA commercial software. This paper describes an experimental approach to estimate the thermal contact conductance between a blank made of Boron Steel (USIBOR 1500) and tool made of Tool Steel (STAVAX). Its dependency on applied pressure is also studied and the experimental results were then compared with FEA simulations.

  17. Five-day inhalation toxicity study of three types of synthetic amorphous silicas in Wistar rats and post-exposure evaluations for up to 3 months.

    PubMed

    Arts, Josje H E; Muijser, Hans; Duistermaat, Evert; Junker, Karin; Kuper, C Frieke

    2007-10-01

    Evidence suggests that short-term animal exposures to synthetic amorphous silicas (SAS) and crystalline silica can provide comparable prediction of toxicity to those of 90-day studies, therefore providing the opportunity to screen these types of substances using short-term rather than 90-day studies. To investigate this hypothesis, the inhalation toxicity of three SAS, precipitated silica Zeosil 45, silica gel Syloid 74, and pyrogenic silica Cab-O-Sil M5 was studied in Wistar rats. Rats were exposed nose-only to concentrations of 1, 5 or 25mg/m(3) of one of the SAS 6h a day for five consecutive days. Positive controls were exposed to 25mg/m(3) crystalline silica (quartz dust), negative controls to clean air. Animals were necropsied the day after the last exposure or 1 or 3 months later. All exposures were tolerated without serious clinical effects, changes in body weight or food intake. Differences in the effects associated with exposure to the three types of SAS were limited and almost exclusively confined to the 1-day post-exposure time point. Silicon levels in tracheobronchial lymph nodes were below the detection limit in all groups at all time points. Silicon was found in the lungs of all high concentration SAS groups 1-day post-exposure, and was cleared 3 months later. Exposure to all three SAS at 25mg/m(3) induced elevations in biomarkers of cytotoxicity in bronchoalveolar lavage fluid (BALf), increases in lung and tracheobronchial lymph node weight and histopathological lung changes 1-day post-exposure. Exposure to all three SAS at 5mg/m(3) induced histopathological changes and changes in BALf only. With all three SAS these effects were transient and, with the exception of slight histopathological lung changes at the higher exposure levels, were reversible during the 3-month recovery period. No adverse changes were observed in animals exposed to any of the SAS at 1mg/m(3). In contrast, with quartz-exposed animals the presence of silicon in the lungs was

  18. Impact of the analytical blank in the uncertainty evaluation of the copper content in waters by flame atomic absorption spectrometry.

    PubMed

    de Oliveira, Elcio Cruz; Monteiro, Maria Inês Couto; Pontes, Fernanda Veronesi Marinho; de Almeida, Marcelo Dominguez; Carneiro, Manuel Castro; da Silva, Lílian Irene Dias; Alcover Neto, Arnaldo

    2012-01-01

    Chemical analysts use analytical blanks in their analyses, but seldom is this source of uncertainty evaluated. Generally, there is great confusion. Although the numerical value of the blank, in some situations, can be negligible, its source of uncertainty cannot be. This article discusses the uncertainty contribution of the analytical blank using a numerical example of the copper content in waters by flame atomic absorption spectrometry. The results indicate that the uncertainties of the analytical blank can contribute up to 50% when the blank sample is considered in this analysis, confirming its high impact. This effect can be primarily observed where the analyte concentration approaches the lower range of the analytical curve. Even so, the blank is not always computed. Therefore, the relevance of the analytical blank can be confirmed by uncertainty evaluation.

  19. Breastfeeding Self-Efficacy Scale: Validation of the Italian Version and Correlation With Breast-feeding at 3 Months.

    PubMed

    Petrozzi, Angela; Gagliardi, Luigi

    2016-01-01

    Psychological factors can influence breast-feeding. We translated into Italian and validated the Breastfeeding Self-Efficacy Scale Short Form (BSES-SF) and investigated its predictive ability and its relation with postpartum depression symptoms.BSES-SF and Edinburgh Postnatal Depression Scale (EPDS) were administered 2 to 3 days after delivery to 122 mothers. Breast-feeding was assessed at 3 months.The BSES-SF displayed good validity (receiver operating characteristic area = 0.69) for predicting full breast-feeding at 3 months. In multivariate analysis, the probability of full breast-feeding increased 2.4% for 1-point increase of BSES-SF. The BSES-SF and EPDS scores were inversely correlated. BSES-SF is a useful tool to identify the risk of early breast-feeding attrition.

  20. Breastfeeding Self-Efficacy Scale: Validation of the Italian Version and Correlation With Breast-feeding at 3 Months.

    PubMed

    Petrozzi, Angela; Gagliardi, Luigi

    2016-01-01

    Psychological factors can influence breast-feeding. We translated into Italian and validated the Breastfeeding Self-Efficacy Scale Short Form (BSES-SF) and investigated its predictive ability and its relation with postpartum depression symptoms.BSES-SF and Edinburgh Postnatal Depression Scale (EPDS) were administered 2 to 3 days after delivery to 122 mothers. Breast-feeding was assessed at 3 months.The BSES-SF displayed good validity (receiver operating characteristic area = 0.69) for predicting full breast-feeding at 3 months. In multivariate analysis, the probability of full breast-feeding increased 2.4% for 1-point increase of BSES-SF. The BSES-SF and EPDS scores were inversely correlated. BSES-SF is a useful tool to identify the risk of early breast-feeding attrition. PMID:26192699

  1. Evaluation of volatile organic compound (VOC) blank data and application of study reporting levels to groundwater data collected for the California GAMA Priority Basin Project, May 2004 through September 2010

    USGS Publications Warehouse

    Fram, Miranda S.; Olsen, Lisa D.; Belitz, Kenneth

    2012-01-01

    Volatile organic compounds (VOCs) were analyzed in quality-control samples collected for the California Groundwater Ambient Monitoring and Assessment (GAMA) Program Priority Basin Project. From May 2004 through September 2010, a total of 2,026 groundwater samples, 211 field blanks, and 109 source-solution blanks were collected and analyzed for concentrations of 85 VOCs. Results from analyses of these field and source-solution blanks and of 2,411 laboratory instrument blanks during the same time period were used to assess the quality of data for the 2,026 groundwater samples. Eighteen VOCs were detected in field blanks or source-solution blanks: acetone, benzene, bromodichloromethane, 2-butanone, carbon disulfide, chloroform, 1,1-dichloroethene, dichloromethane, ethylbenzene, tetrachloroethene, styrene, tetrahydrofuran, toluene, trichloroethene, trichlorofluoromethane, 1,2,4-trimethylbenzene, m- and p-xylenes, and o-xylene. The objective of the evaluation of the VOC-blank data was to determine if study reporting levels (SRLs) were needed for any of the VOCs detected in blanks to ensure the quality of the data from groundwater samples. An SRL is equivalent to a raised reporting level that is used in place of the reporting level used by the analyzing laboratory [long‑term method detection level (LT-MDL) or laboratory reporting level (LRL)] to reduce the probability of reporting false-positive detections. Evaluation of VOC-blank data was done in three stages: (1) identification of a set of representative quality‑control field blanks (QCFBs) to be used for calculation of SRLs and identification of VOCs amenable to the SRL approach, (2) evaluation of potential sources of contamination to blanks and groundwater samples by VOCs detected in field blanks, and (3) selection of appropriate SRLs from among four potential SRLs for VOCs detected in field blanks and application of those SRLs to the groundwater data. An important conclusion from this study is that to ensure the

  2. In the first 3 months after stroke is progressive resistance training safe and does it improve activity? A systematic review.

    PubMed

    Salter, Karen; Musovic, Amie; F Taylor, Nicholas

    2016-10-01

    BACKGROUND Progressive resistance training (PRT) can improve strength and function in people with chronic stroke, but less is known about whether this intervention is safe and beneficial during the first 3 months following stroke. OBJECTIVE To systematically review the evidence about the safety and effectiveness of PRT to improve activity in people within the first 3 months after stroke. METHODS After database searching and selection of studies a risk of bias assessment was conducted. Data for the primary outcome of safety was synthesised descriptively and meta-analyses for other outcomes were conducted using a random effects model. RESULTS The quality of the 5 included studies ranged from good to excellent (mean 24.2, range 20-28). For the trials investigating adverse events, none reported any significant increase in events after PRT. There was high level evidence that PRT had little or no effect on strength (SMD (standardized mean difference) 0.17, 95% CI -0.16 to 0.50, I(2) = 0%). There were no significant benefit for upper limb function (SMD 0.11, 95% CI -0.41 to 0.63, I(2) = 0%) and mobility (SMD 0.11, 95% CI -0.21 to 0.43, I(2) = 27%) after PRT compared with controls. CONCLUSIONS There was no evidence reported that PRT is unsafe in people within the first 3 months after stroke, although there was a lack of reporting about adverse events. The lack of demonstration of effect in improving muscle strength and activity suggests there is insufficient evidence to recommend the prescription of PRT for people within the first 3 months after stroke.

  3. Dental plaque associated with self-ligating brackets during the initial phase of orthodontic treatment: A 3-month preliminary study

    PubMed Central

    Al-Anezi, Saud A

    2014-01-01

    Background: To compare changes in the amount and distribution of dental plaque associated with placement of elastomeric modules over a self-ligating bracket during orthodontic treatment and to relate these changes to the periodontal inflammation. Materials and Methods: A cross-arch randomization trial was carried out at Bristol Dental School, United Kingdom. Clinical measurements of periodontal inflammation and plaque accumulation and microbiological test were done on 24 patients aged 11-14 years [Mean (SD) age = 12.6 (1.01) years] wearing fixed appliances (Damon 2 brackets, Ormco, Orange, CA, USA) at the start and 3 months into fixed orthodontic treatment. Results: In the first 3 months of treatment there was no statistically significant difference in bleeding on probing between incisors with and without elastomeric modules (P = 0.125 and 0.508, respectively). The difference in plaque accumulation was not statistically significant (P = 0.78). The difference in probing depths between the incisors was not statistically significant (P = 0.84). The microbiological analysis showed no difference. Conclusions: Based on this preliminary 3 months study, elastomeric modules were not significantly associated with any increased risk during treatment when compared to self-ligating brackets. The longer term studies are needed to further confirm the findings of the present study. PMID:24987657

  4. Effect of 3 months of doxazosin therapy on T-cell subsets in type 2 diabetic patients.

    PubMed

    Mácsai, E; Cseh, A; Budai, G; Mészáros, G; Vásárhelyi, B; Fischer, K; Szabó, A; Treszl, A

    2009-01-01

    Doxazosin, an alpha(1)-adrenergic receptor inhibitor, is commonly administered to patients with type 2 diabetes, hypertension and nephropathy. The impact of 3 months' doxazosin therapy on the prevalence of activated and regulatory T lymphocytes was analysed in this pilot study of men with type 2 diabetes (n = 10) who received doxazosin 4 mg/day in addition to their ongoing therapy. The prevalence of CD4(+), CD8(+), CD25(+) and CD69(+) cells at baseline and after 3 months of add-on therapy was determined. The prevalence of regulatory T-cells was detected by two different approaches: forkhead box P3 (FoxP3) positivity; and the number of CD4(+)CD25(+high) cells. During 3 months of doxazosin therapy, patients' blood pressure, blood glucose control and lipid profiles all significantly improved. Simultaneously, the prevalence of activated T-cells (CD4(+)CD69(+) and CD8(+)CD69(+) cells) decreased, whereas that of regulatory T-cells increased. These results indicate an immunomodulatory action of doxazosin in type 2 diabetic patients.

  5. Edge Length and Surface Area of a Blank: Experimental Assessment of Measures, Size Predictions and Utility

    PubMed Central

    Dogandžić, Tamara; Braun, David R.; McPherron, Shannon P.

    2015-01-01

    Blank size and form represent one of the main sources of variation in lithic assemblages. They reflect economic properties of blanks and factors such as efficiency and use life. These properties require reliable measures of size, namely edge length and surface area. These measures, however, are not easily captured with calipers. Most attempts to quantify these features employ estimates; however, the efficacy of these estimations for measuring critical features such as blank surface area and edge length has never been properly evaluated. In addition, these parameters are even more difficult to acquire for retouched implements as their original size and hence indication of their previous utility have been lost. It has been suggested, in controlled experimental conditions, that two platform variables, platform thickness and exterior platform angle, are crucial in determining blank size and shape meaning that knappers can control the interaction between size and efficiency by selecting specific core angles and controlling where fracture is initiated. The robustness of these models has rarely been tested and confirmed in context other than controlled experiments. In this paper, we evaluate which currently employed caliper measurement methods result in the highest accuracy of size estimations of blanks, and we evaluate how platform variables can be used to indirectly infer aspects of size on retouched artifacts. Furthermore, we investigate measures of different platform management strategies that control the shape and size of artifacts. To investigate these questions, we created an experimental lithic assemblage, we digitized images to calculate 2D surface area and edge length, which are used as a point of comparison for the caliper measurements and additional analyses. The analysis of aspects of size determinations and the utility of blanks contributes to our understanding of the technological strategies of prehistoric knappers and what economic decisions they made

  6. Numerical simulation and experimental assessment for cold cylindrical deep drawing without blank-holder

    NASA Astrophysics Data System (ADS)

    Chiorescu, D.; Chiorescu, E.; Filipov, F.

    2016-08-01

    The metal forming process through plastic deformation, represented by deep drawing, is an extremely vast research field. In this article we analyse the influence of the die punch clearance, the average velocity in the active phase as well as of the lubrication on the deep drawing quality revealed by the thickness evenness on the finished product surface. For thorough research and in order to minimize the number of experimental trials, a fractional factorial design of TAGUCHI type was developed attached to an orthogonal array, thus analysing the contribution of the three aforementioned parameters to the quality of cylindrical deep drawing without a blank holder. In order to compare the experimental results, a conceptual 3D model of the system punch-blank-die was made, which respects entirely the geometry of the active elements and of the blank, but schematizes/approximates the material properties of the blank. Thus, using these simulations, we can investigate the variation of the deformation parameters throughout the drawing process: from the initial blank form to the final drawn part. The numerical simulation of the drawing of cylindrical cups was made using the ANSYS V14 program, the Explicit Dynamic module. Using the signal-to-noise ratio suggested by TAGUCHI, we determined the influence of each of the three parameters under study on deep drawing quality, as well as their optimal values.

  7. Deep blank-field catalogue for medium- and large-sized telescopes

    NASA Astrophysics Data System (ADS)

    Jiménez Esteban, F. M.; Cabrera Lavers, A.; Cardiel, N.; Alacid, J. M.

    2012-11-01

    The observation of blank fields, defined as regions of the sky that are devoid of stars down to a given threshold magnitude, constitutes one of the most relevant calibration procedures required for the proper reduction of astronomical data obtained following typical observing strategies. In this work, we have used Delaunay triangulation to search for deep blank fields throughout the whole sky, with a minimum size of 10 arcmin in diameter and an increasing threshold magnitude from 15 to 18 in the R band of the USNO-B Catalog of the United States Naval Observatory. The result is a catalogue with the deepest blank fields known so far. A short sample of these regions has been tested with the 10.4-m Gran Telescopio Canarias, and it has been shown to be extremely useful for medium- and large-sized telescopes. Because some of the regions found could also be suitable for new extragalactic studies, we have estimated the galactic extinction in the direction of each deep blank field. This catalogue is accessible through the virtual observatory tool TESELA, and the user can retrieve - and visualize using ALADIN - the deep blank fields available near a given position in the sky.

  8. Electrical Responses and Spontaneous Activity of Human iPS-Derived Neuronal Networks Characterized for 3-month Culture with 4096-Electrode Arrays

    PubMed Central

    Amin, Hayder; Maccione, Alessandro; Marinaro, Federica; Zordan, Stefano; Nieus, Thierry; Berdondini, Luca

    2016-01-01

    The recent availability of human induced pluripotent stem cells (hiPSCs) holds great promise as a novel source of human-derived neurons for cell and tissue therapies as well as for in vitro drug screenings that might replace the use of animal models. However, there is still a considerable lack of knowledge on the functional properties of hiPSC-derived neuronal networks, thus limiting their application. Here, upon optimization of cell culture protocols, we demonstrate that both spontaneous and evoked electrical spiking activities of these networks can be characterized on-chip by taking advantage of the resolution provided by CMOS multielectrode arrays (CMOS-MEAs). These devices feature a large and closely-spaced array of 4096 simultaneously recording electrodes and multi-site on-chip electrical stimulation. Our results show that networks of human-derived neurons can respond to electrical stimulation with a physiological repertoire of spike waveforms after 3 months of cell culture, a period of time during which the network undergoes the expression of developing patterns of spontaneous spiking activity. To achieve this, we have investigated the impact on the network formation and on the emerging network-wide functional properties induced by different biochemical substrates, i.e., poly-dl-ornithine (PDLO), poly-l-ornithine (PLO), and polyethylenimine (PEI), that were used as adhesion promoters for the cell culture. Interestingly, we found that neuronal networks grown on PDLO coated substrates show significantly higher spontaneous firing activity, reliable responses to low-frequency electrical stimuli, and an appropriate level of PSD-95 that may denote a physiological neuronal maturation profile and synapse stabilization. However, our results also suggest that even 3-month culture might not be sufficient for human-derived neuronal network maturation. Taken together, our results highlight the tight relationship existing between substrate coatings and emerging network

  9. Electrical Responses and Spontaneous Activity of Human iPS-Derived Neuronal Networks Characterized for 3-month Culture with 4096-Electrode Arrays.

    PubMed

    Amin, Hayder; Maccione, Alessandro; Marinaro, Federica; Zordan, Stefano; Nieus, Thierry; Berdondini, Luca

    2016-01-01

    The recent availability of human induced pluripotent stem cells (hiPSCs) holds great promise as a novel source of human-derived neurons for cell and tissue therapies as well as for in vitro drug screenings that might replace the use of animal models. However, there is still a considerable lack of knowledge on the functional properties of hiPSC-derived neuronal networks, thus limiting their application. Here, upon optimization of cell culture protocols, we demonstrate that both spontaneous and evoked electrical spiking activities of these networks can be characterized on-chip by taking advantage of the resolution provided by CMOS multielectrode arrays (CMOS-MEAs). These devices feature a large and closely-spaced array of 4096 simultaneously recording electrodes and multi-site on-chip electrical stimulation. Our results show that networks of human-derived neurons can respond to electrical stimulation with a physiological repertoire of spike waveforms after 3 months of cell culture, a period of time during which the network undergoes the expression of developing patterns of spontaneous spiking activity. To achieve this, we have investigated the impact on the network formation and on the emerging network-wide functional properties induced by different biochemical substrates, i.e., poly-dl-ornithine (PDLO), poly-l-ornithine (PLO), and polyethylenimine (PEI), that were used as adhesion promoters for the cell culture. Interestingly, we found that neuronal networks grown on PDLO coated substrates show significantly higher spontaneous firing activity, reliable responses to low-frequency electrical stimuli, and an appropriate level of PSD-95 that may denote a physiological neuronal maturation profile and synapse stabilization. However, our results also suggest that even 3-month culture might not be sufficient for human-derived neuronal network maturation. Taken together, our results highlight the tight relationship existing between substrate coatings and emerging

  10. Electrical Responses and Spontaneous Activity of Human iPS-Derived Neuronal Networks Characterized for 3-month Culture with 4096-Electrode Arrays.

    PubMed

    Amin, Hayder; Maccione, Alessandro; Marinaro, Federica; Zordan, Stefano; Nieus, Thierry; Berdondini, Luca

    2016-01-01

    The recent availability of human induced pluripotent stem cells (hiPSCs) holds great promise as a novel source of human-derived neurons for cell and tissue therapies as well as for in vitro drug screenings that might replace the use of animal models. However, there is still a considerable lack of knowledge on the functional properties of hiPSC-derived neuronal networks, thus limiting their application. Here, upon optimization of cell culture protocols, we demonstrate that both spontaneous and evoked electrical spiking activities of these networks can be characterized on-chip by taking advantage of the resolution provided by CMOS multielectrode arrays (CMOS-MEAs). These devices feature a large and closely-spaced array of 4096 simultaneously recording electrodes and multi-site on-chip electrical stimulation. Our results show that networks of human-derived neurons can respond to electrical stimulation with a physiological repertoire of spike waveforms after 3 months of cell culture, a period of time during which the network undergoes the expression of developing patterns of spontaneous spiking activity. To achieve this, we have investigated the impact on the network formation and on the emerging network-wide functional properties induced by different biochemical substrates, i.e., poly-dl-ornithine (PDLO), poly-l-ornithine (PLO), and polyethylenimine (PEI), that were used as adhesion promoters for the cell culture. Interestingly, we found that neuronal networks grown on PDLO coated substrates show significantly higher spontaneous firing activity, reliable responses to low-frequency electrical stimuli, and an appropriate level of PSD-95 that may denote a physiological neuronal maturation profile and synapse stabilization. However, our results also suggest that even 3-month culture might not be sufficient for human-derived neuronal network maturation. Taken together, our results highlight the tight relationship existing between substrate coatings and emerging network

  11. Transition to being the mother of a new infant in the first 3 months: maternal problem solving and self-appraisals.

    PubMed

    Pridham, K F; Chang, A S

    1992-02-01

    This study explored components of a model of transition to being the mother of a new infant during an infant's first 3 months. Personal and situational conditions and maternal problem-solving factors (issue formulating and the use of help with issues) that may influence transition markers (maternal appraisal of problem-solving competence and evaluation of parenting) were examined for two study periods: the first 30 days postpartum and the next 60 days. For the second study period, variables contributing to maternal attention to infant growth, development and temperament (knowing issues) were also explored. Questionnaires and a daily log kept by 62 mothers of healthy term infants were data sources. Everyday supports (situational condition) contributed to use of lay help for the second period. Caretaking issues positively influenced use of clinician help throughout the study. The number of knowing issues a mother formulated contributed positively to problem-solving competence and to parenting evaluation; the use of problem-solving help had no effect. More clinician help received during the first month meant higher need for maternal action for both knowing and caretaking issues in the second and third months. Further study of the mechanisms of these relationships and examination of factors contributing to shifts in the transition process are needed. PMID:1556329

  12. Effect of whole-body vibration for 3 months on arterial stiffness in the middle-aged and elderly

    PubMed Central

    Lai, Chung-Liang; Chen, Han-Yu; Tseng, Shiuan-Yu; Liao, Wan-Chun; Liu, Bing-Tang; Lee, Meng-Chih; Chen, Hsin-Shui

    2014-01-01

    Background Cardiovascular disease (CVD) is a common problem of middle-aged and older adults. Increased arterial stiffness is a CVD risk factor. Whole-body vibration (WBV) is a simple and convenient exercise for middle-aged and older adults; however, there have been few studies investigating the effect of WBV on arterial stiffness. This study mainly investigated the effect of WBV on arterial stiffness in middle-aged and older adults. Methods A total of 38 (21 women and 17 men) middle-aged and elderly subjects (average age, 61.9 years) were randomly divided into the WBV group and the control group for a 3-month trial. The WBV group received an intervention of 30 Hz and 3.2 g WBV in a natural full standing posture at a sports center. The brachial–ankle pulse wave velocity (baPWV), a marker of systemic arterial stiffness, and blood pressure and heart rate were measured before and after the intervention. Results After 3 months, there were no significant changes in blood pressure or heart rate in both groups. However, the bilateral baPWV was significantly reduced in the WBV group (decreased by 0.65 m/second [P=0.014]; 0.63 m/second [P=0.041] in either side), but not in the control group. The comparison between the two groups was not statistically significant. Conclusion This study found that 3 months of WBV had a positive effect on arterial stiffness in middle-aged and older adults and could therefore be regarded as a supplementary exercise. Larger-scale studies are needed to confirm the effects of WBV in the future. PMID:24872684

  13. The ingestion of cow's milk formula in the first 3 months of life prevents the development of cow's milk allergy

    PubMed Central

    Sugiura, Shiro; Ito, Komei

    2016-01-01

    Background IgE-mediated cow's milk allergy (CMA) is one of the most common food allergies in infants. It is still controversial whether the early introduction of cow's milk formula (CMF) prevents the development of CMA. Objective We aimed to evaluate the duration and frequency of CMF ingestion as compere with exclusive breast-fed for preventing CMA in high-risk infants. Methods We enrolled the patients diagnosed with hen's egg allergy by an oral food challenge. A questionnaire was completed by the caregivers of the patients regarding the timing of introduction and discontinuation of CMF, and the frequency of CMF ingestion. Based on the information, we analyzed the relationship between the duration and frequency of CMF ingestion and the development of CMA at 3–24 months of age. Results Three hundred seventy-four patients were analyzed; 171 were diagnosed with CMA (45.7%). The analyzed patients (n = 374) were categorized into the following subgroups: exclusively breast-fed (breast-fed group, n = 75); discontinued ingestion of CMF before 3 months of age (temporary group, n = 177); continuous ingestion of CMF, but not daily, up to 3 months of age (nondaily group, n = 47); continuous ingestion of CMF at least once daily (daily group, n = 75). The incidence of developing CMA between the breast-fed group and temporary group did not show any statistical difference. Nondaily group and daily group had significantly lower incidence of developing CMA in comparison to the breast-fed group (nondaily group odds ratio 0.43; p = 0.02, daily group odds ratio 0.11; p < 0.001). Conclusion Ingestion of CMF during the first 3 months of life might prevent the development of CMA in high-risk infants. PMID:27803880

  14. Postnatal depression among Sudanese women: prevalence and validation of the Edinburgh Postnatal Depression Scale at 3 months postpartum

    PubMed Central

    Khalifa, Dina Sami; Glavin, Kari; Bjertness, Espen; Lien, Lars

    2015-01-01

    Purpose Postnatal depression (PND) rates in low-resource countries have reached levels between 4.9% and 59%. Maternal mental health has not been researched in Sudan, and there are no existing statistics on prevalence or significant risk factors for PND. Consequently, no screening test has been validated to screen for PND at the primary health care level. This study investigates the 3 months prevalence of PND and validates the Edinburgh Postnatal Depression Scale (EPDS) against the Mini-International Neuropsychiatric Interview (MINI). Methodology Pregnant Sudanese women in the second and third trimesters were recruited to the study during routine antenatal care visits in two major maternity hospitals in Khartoum state. They were screened for PND at 3 months postpartum using the EPDS. Test positive women were matched with test negative women according to nearest date of birth. A clinical psychologist verified their depression status using the MINI. Results The follow-up rate was 79%. At a cutoff point of ≥12, the 3 months prevalence of PND was 9.2%. The sensitivity and specificity of the EPDS were 89% and 82%, respectively. The EPDS and MINI showed a strong positive relationship (odds ratio =36). The positive predictive value and negative predictive value, using this study’s prevalence, were 33% and 98.7%, respectively. The receiver operator characteristic analysis showed an area under the curve of 0.89. The cut-off point ≥12 was the most acceptable point as it had the lowest number needed to diagnose (1.4) and a false-positive rate of 18%. Conclusion The EPDS is a valid tool for screening for PND on a Sudanese population. It was accepted, easily administered, and understood by postnatal women. Health care personnel, especially village midwives, should be trained on screening and referral of depressed women for clinical evaluation and management. Due to limited resources available in Sudan, shorter screening tests need to be validated in the future. PMID

  15. Pain-related stress in the Neonatal Intensive Care Unit and salivary cortisol reactivity to socio-emotional stress in 3-month-old very preterm infants.

    PubMed

    Provenzi, Livio; Giusti, Lorenzo; Fumagalli, Monica; Tasca, Hilarj; Ciceri, Francesca; Menozzi, Giorgia; Mosca, Fabio; Morandi, Francesco; Borgatti, Renato; Montirosso, Rosario

    2016-10-01

    Very preterm (VPT) infants are hospitalized in the Neonatal Intensive Care Unit (NICU) and exposed to varying levels of skin-breaking procedures (pain-related stress), even in absence of severe clinical conditions. Repeated and prolonged pain exposure may alter hypothalamic-pituitary-adrenal (HPA) axis reactivity in VPT infants. During the post-discharge period, altered HPA axis reactivity has been documented in response to non-social stressors, using salivary cortisol as a biomarker. However, little is known about the effects of NICU pain-related stress on subsequent HPA axis reactivity to socio-emotional stress in infants. We examined the relationship between pain-related stress in NICU and HPA axis reactivity (i.e., salivary cortisol reactivity) to an age-appropriate socio-emotional condition in 37 healthy VPT infants compared to 53 full-term (FT) controls. The number of skin-breaking procedures was obtained across NICU stay for VPT infants. At 3 months (corrected age for prematurity), all infants participated in the maternal Face-to-Face Still-Face (FFSF) procedure, in order to assess HPA axis reactivity to socio-emotional stress (i.e., maternal unresponsiveness). VPT infants exhibited a blunted salivary cortisol reactivity, which was associated with the amount of skin-breaking procedures during NICU: greater pain-related stress predicted lower salivary cortisol reactivity, adjusting for neonatal confounders. These findings further advance our knowledge of how early exposure to pain-related stress in NICU contributes to the programming of an altered HPA axis reactivity to socio-emotional stress in 3-month-old VPT infants, even in the absence of major perinatal complications.

  16. Microbiological and biochemical effectiveness of an antiseptic gel on the bacterial contamination of the inner space of dental implants: a 3-month human longitudinal study.

    PubMed

    D'Ercole, S; Tetè, S; Catamo, G; Sammartino, G; Femminella, B; Tripodi, D; Spoto, G; Paolantonio, M

    2009-01-01

    Microbial penetration inside the implants internal cavity produces a bacterial reservoir that is associated with an area of inflamed connective tissue facing the fixture-abutment junction. The aim of this clinical trial is to evaluate the effectiveness of a 1 percent chlorhexidine gel on the internal bacterial contamination of implants with screw-retained abutments and on the level of AST secreted in peri-implant crevicular fluid. Twenty-five patients (aged 29 to 58 years) each received one implant. Three months after the end of the restorative treatment, and immediately after a clinical and radiographic examination and the abutment removal, microbiological samples were obtained from the internal part of each fixture and biochemical samples were collected by peri-implant sulci. The patients were then divided into two groups: the control (CG; n=10) and test (TG; n=15) groups. The CG had the abutment screwed into place and the crown cemented without any further intervention. In contrast, before the abutment placement and screw tightening, the TG had the internal part of the fixture filled with a 1 percent chlorhexidine gel. Three months later, the same clinical, microbiological and biochemical procedures were repeated in both groups. Total bacterial count, specific pathogens and AST activity were detected. The clinical parameters remained stable throughout the study. From baseline to the 3-month examination, the total bacterial counts underwent a significant reduction only in the TG. In contrast, the AST activity showed a significant increase in the CG. The administration of a 1% chlorhexidine gel appears to be an effective method for the reduction of bacterial colonization of the implant cavity and for safeguarding the health status of peri-implant tissue over a 3-month administration period.

  17. A method for repairing amplitude defects in multilayer-coated EUV mask blanks

    SciTech Connect

    Barty, A; Hau-Riege, S; Stearns, D; Clift, M; Mirkarimi, P; Gullikson, E; Chapman, H; Sweeney, D

    2003-10-20

    EUV mask blanks are fabricated by depositing a reflective Mo/Si multilayer film onto super-polished substrates. Localized defects in this thin film coating can significantly perturb the reflected field and produce errors in the printed image. Ideally one would want to manufacture defect-free mask blanks; however, this may be very difficult to achieve in practice. One practical way to increase the yield of mask blanks is to be able to repair a significant number of the defects in the multilayer coating. In this paper we present a method for repairing defects that are near the top surface of the coating; we call these amplitude defects because they predominantly attenuate the amplitude of the reflected field. Although the discussion is targeted to the application of manufacturing masks for EUV lithography, the conclusions and results are also applicable to understanding the optical effects of multilayer erosion, including ion-induced multilayer erosion and condenser erosion in EUVL steppers.

  18. Fatalities caused by spherical bullets fired from blank cartridge guns in Istanbul, Turkey.

    PubMed

    Uzün, Ibrahim; Büyük, Yalçin; Erkol, Zerrin; Ağritmiş, Hasan; Kir, Ziya

    2009-09-01

    Blank cartridge guns are generally regarded as being harmless and are not considered to be firearms in the legal sense in most countries. To show the danger of these guns upon simple modifications, we report 59 fatalities resulting from these simply modified blank cartridge guns in Istanbul, Turkey. The great majority of the victims were males and the age of those ranged from 11 to 61 years. In 55.9% of these cases, homicide was the origin followed by suicide (39%). The right temporal region was detected to be the preferred region in suicidal shots by blank cartridge guns with a frequency of 56.5%. In trial shots, all these guns were detected to discharge steel or lead spherical objects, generally 4 or 5 mm in diameter, successfully. Our findings strongly suggest that these guns should also be considered as handguns in the legal sense.

  19. Enhanced procedural blank control for organic geochemical studies of critical sample material.

    PubMed

    Leider, A; Schumacher, T C; Hallmann, C

    2016-09-01

    Organic contamination of sedimentary rocks can produce artefacts in studies of hydrocarbon composition, and this can have significant negative consequences for interpretations of the geobiological record. False positives - that is cases of non-syngenetic hydrocarbon biomarkers - are common in Precambrian studies, and significant challenges persist despite the intensive effort devoted to these studies. Efforts to standardize the 'burden of proof' for distinguishing between contamination and syngenetic material have to date failed to yield a simple or universal protocol, yet the need remains great, as both bitumen-lean rocks and bitumen-rich samples can be vulnerable to the accumulation of false-positive signals. In an effort to determine the best approach to quality control, we tested the capability of different blank materials to collect ambient contamination by assessing their capacity to adsorb hydrocarbons during storage in plastic bags and found that commonly used Quartz sand does not provide an adequate measure of storage- or laboratory-induced contamination. Brick blanks, having the advantage that they can parallel rock samples even during the sawing process, are characterized by similar poor adsorption properties. Primarily steered by mineralogy, organic carbon content and surface area, model-black shales can adsorb up to 20 times more contaminants than sand blanks and up to 200 times more contaminants than organic-free model-carbonates. This observation provides an explanation for reports and observations of seemingly systematic stratigraphic variation of contaminants, but mostly should raise awareness for the evaluation of procedural blanks, in particular of sample-to-blank ratios, when studying bitumen-lean rock samples of varying lithologies. Additionally, differences between the hydrocarbon profiles in plastic bags and the hydrocarbon signatures transferred to blank materials emphasize difficulties in the unequivocal detection of contamination sources

  20. Enhanced procedural blank control for organic geochemical studies of critical sample material.

    PubMed

    Leider, A; Schumacher, T C; Hallmann, C

    2016-09-01

    Organic contamination of sedimentary rocks can produce artefacts in studies of hydrocarbon composition, and this can have significant negative consequences for interpretations of the geobiological record. False positives - that is cases of non-syngenetic hydrocarbon biomarkers - are common in Precambrian studies, and significant challenges persist despite the intensive effort devoted to these studies. Efforts to standardize the 'burden of proof' for distinguishing between contamination and syngenetic material have to date failed to yield a simple or universal protocol, yet the need remains great, as both bitumen-lean rocks and bitumen-rich samples can be vulnerable to the accumulation of false-positive signals. In an effort to determine the best approach to quality control, we tested the capability of different blank materials to collect ambient contamination by assessing their capacity to adsorb hydrocarbons during storage in plastic bags and found that commonly used Quartz sand does not provide an adequate measure of storage- or laboratory-induced contamination. Brick blanks, having the advantage that they can parallel rock samples even during the sawing process, are characterized by similar poor adsorption properties. Primarily steered by mineralogy, organic carbon content and surface area, model-black shales can adsorb up to 20 times more contaminants than sand blanks and up to 200 times more contaminants than organic-free model-carbonates. This observation provides an explanation for reports and observations of seemingly systematic stratigraphic variation of contaminants, but mostly should raise awareness for the evaluation of procedural blanks, in particular of sample-to-blank ratios, when studying bitumen-lean rock samples of varying lithologies. Additionally, differences between the hydrocarbon profiles in plastic bags and the hydrocarbon signatures transferred to blank materials emphasize difficulties in the unequivocal detection of contamination sources

  1. Lithographic qualification of high-transmission mask blank for 10nm node and beyond

    NASA Astrophysics Data System (ADS)

    Xu, Yongan; Faure, Tom; Viswanathan, Ramya; Lobb, Granger; Wistrom, Richard; Burns, Sean; Hu, Lin; Graur, Ioana; Bleiman, Ben; Fischer, Dan; Mignot, Yann; Sakamoto, Yoshifumi; Toda, Yusuke; Bolton, John; Bailey, Todd; Felix, Nelson; Arnold, John; Colburn, Matthew

    2016-04-01

    In this paper, we discuss the lithographic qualification of high transmission (High T) mask for Via and contact hole applications in 10nm node and beyond. First, the simulated MEEF and depth of focus (DoF) data are compared between the 6% and High T attnPSM masks with the transmission of High T mask blank varying from 12% to 20%. The 12% High T blank shows significantly better MEEF and larger DoF than those of 6% attnPSM mask blank, which are consistent with our wafer data. However, the simulations show no obvious advantage in MEEF and DoF when the blank transmittance is larger than 12%. From our wafer data, it has been seen that the common process window from High T mask is 40nm bigger than that from the 6% attnPSM mask. In the elongated bar structure with smaller aspect ratio, 1.26, the 12% High T mask shows significantly less develop CD pull back in the major direction. Compared to the High T mask, the optimized new illumination condition for 6% attnPSM shows limited improvement in MEEF and the DoF through pitch. In addition, by using the High T mask blank, we have also investigated the SRAF printing, side lobe printing and the resist profile through cross sections, and no patterning risk has been found for manufacturing. As part of this work new 12% High T mask blank materials and processes were developed, and a brief overview of key mask technology development results have been shared. Overall, it is concluded that the High T mask, 12% transmission, provides the most robust and extendable lithographic solution for 10nm node and beyond.

  2. Mercury Deposition Network Site Operator Training for the System Blank and Blind Audit Programs

    USGS Publications Warehouse

    Wetherbee, Gregory A.; Lehmann, Christopher M.B.

    2008-01-01

    The U.S. Geological Survey operates the external quality assurance project for the National Atmospheric Deposition Program/Mercury Deposition Network. The project includes the system blank and blind audit programs for assessment of total mercury concentration data quality for wet-deposition samples. This presentation was prepared to train new site operators and to refresh experienced site operators to successfully process and submit system blank and blind audit samples for chemical analysis. Analytical results are used to estimate chemical stability and contamination levels of National Atmospheric Deposition Program/Mercury Deposition Network samples and to evaluate laboratory variability and bias.

  3. Effect of marginal maternal zinc intake on zinc absorption and growth of 3-month-old infant rhesus monkeys

    SciTech Connect

    Loennerdal, B.K.; Keen, C.L.; Bell, J.G.; Golub, M.S.; Hendrickx, A.G.; Gershwin, M.E. )

    1990-09-01

    One compensatory mechanism for marginal zinc intake may be through an enhanced absorption of zinc. Such a compensatory mechanism could be of value to the neonate, as poor zinc nutriture during early life has severe consequences on growth and development. We studied the uptake of zinc by 3-month-old infant rhesus monkeys born to dams fed control diets 100 micrograms of zinc per gram of diet or zinc-restricted diets (4 micrograms of zinc per gram of diet). Zinc uptake/retention was studied by feeding 3-month-old infant monkeys that had fasted an infant formula containing zinc 65 by gavage. Whole body radioactivity was counted immediately after intubation and on days 10 and 17 after intubation. Regardless of dietary group, 65-zinc retention was high, ranging from 33% to 71% of the dose fed to the monkeys. There were no significant differences between the two dietary groups in the percentage of zinc retention at days 10 and 17. Independent of the dietary group, there was no correlation between plasma zinc and zinc absorption. A positive correlation was found between weight gain and zinc retention in the marginal zinc infants, while a negative correlation between weight gain and zinc retention was observed in the control infants. These observations suggest that the mechanisms underlying growth may be different in infants born to dams fed control vs marginal zinc diets.

  4. Effect of colostrum redox balance on the oxidative status of calves during the first 3 months of life and the relationship with passive immune acquisition.

    PubMed

    Abuelo, Angel; Pérez-Santos, María; Hernández, Joaquín; Castillo, Cristina

    2014-02-01

    New-born calves depend upon colostrum intake for the acquisition of immunoglobulins (Ig) and other beneficial substances. However, colostrum is also a source of reactive oxygen species (ROS). Intrinsic production of ROS also increases after birth, so the combination of colostral and intrinsic ROS could overwhelm the antioxidant capacity of the calf leading to oxidative stress (OS), a condition that has been shown to play a key role in the initiation and development of several pathological conditions. The aim of this observational study was to assess the effects of the redox balance of colostrum on the oxidative status of calves and on passive immune transfer. Serum samples were taken from 20 calves on their day of birth, every week during their first month of life and at 2 and 3 months of age, and the concentrations of ROS and serum antioxidant capacity (SAC) assayed. The oxidative/anti-oxidative profile and IgG content of the colostrum were also assessed. The redox balance of the colostrum had a significant effect on both calf oxidative status and on passive immune transfer (as measured by calf serum IgG concentration), which indicates that the oxidative/antioxidative profile of colostrum should be measured when colostrum quality is assessed. The highest risk of OS during the study period was found to be when the calves were fed artificial milk replacer; this suggests that calves should be supplemented with antioxidants during this period in order to minimize any harmful consequences of high ROS generation.

  5. Avoiding the Blank Stare: Teacher Training with the Gradual Release of Responsibility in Mind

    ERIC Educational Resources Information Center

    Clark, Sandra

    2014-01-01

    Most teachers have experienced the "blank stare" when after teaching a lesson implementing all their best strategies using their best language-learning English and at the moment of releasing responsibility--that is, moving from the teacher's responsibility to prepare students for the task to their responsibility to carry it out--the…

  6. Repair of phase defects in extreme-ultraviolet lithography mask blanks

    SciTech Connect

    Hau-Riege, Stefan P.; Barty, Anton; Mirkarimi, Paul B.; Baker, Sherry; Coy, Michael A.; Mita, Masaaki; Robertson, Vernon E.; Liang, Ted; Stivers, Alan

    2004-12-01

    Phase defects that introduce errors in the printed image are one of the major yield limiters for reticles in extreme-ultraviolet lithography. The basis for a reticle is a mask blank, consisting of an ultra-low-expansion substrate and a reflective multilayer stack that is made up of Mo and Si. A potential methodology for repairing phase defects in these mask blanks is to locally irradiate it with a high-resolution electron beam to induce structural deformations that cancel out the distortion of the multilayer. We present experimental and modeling results that show that the interaction of an electron beam with a mask blank can only be understood when the contraction of the multilayer through silicide formation and substrate compaction, as well as the mechanical response of the mask blank, are considered. One of the consequences is that electron beams with energies around 10 keV that are less than 20 nm in diameter induce depressions in multilayers made up of 50 Mo/Si bilayers that have a surprisingly large diameter of about a micrometer. Our models suggest that these unacceptably large diameters can only be reduced if the compaction of the substrate is prevented.

  7. Enabling high speed friction stir welding of aluminum tailor welded blanks

    NASA Astrophysics Data System (ADS)

    Hovanski, Yuri

    Current welding technologies for production of aluminum tailor-welded blanks (TWBs) are utilized in low-volume and niche applications, and have yet to be scaled for the high-volume vehicle market. This study targeted further weight reduction, part reduction, and cost savings by enabling tailor-welded blank technology for aluminum alloys at high-volumes. While friction stir welding (FSW) has traditionally been applied at linear velocities less than one meter per minute, high volume production applications demand the process be extended to higher velocities more amenable to cost sensitive production environments. Unfortunately, weld parameters and performance developed and characterized at low to moderate welding velocities do not directly translate to high speed linear friction stir welding. Therefore, in order to facilitate production of high volume aluminum FSW components, parameters were developed with a minimum welding velocity of three meters per minute. With an emphasis on weld quality, welded blanks were evaluated for post-weld formability using a combination of numerical and experimental methods. Evaluation across scales was ultimately validated by stamping full-size production door inner panels made from dissimilar thickness aluminum tailor-welded blanks, which provided validation of the numerical and experimental analysis of laboratory scale tests.

  8. Fill in the Blank: Culture Jamming and the Advertising of Agency

    ERIC Educational Resources Information Center

    Lambert-Beatty, Carrie

    2010-01-01

    This article is a review on billboard liberation and some other projects that develop the idea of talking back or over advertising in a playful and youthful way. In one of them, Ji Lee's Bubble Project, an artist places blank thought-bubble stickers on street advertisements and waits to see what people write on them, completing the work of art and…

  9. Use of Monocrystalline Silicon as Tool Material for Highly Accurate Blanking of Thin Metal Foils

    SciTech Connect

    Hildering, Sven; Engel, Ulf; Merklein, Marion

    2011-05-04

    The trend towards miniaturisation of metallic mass production components combined with increased component functionality is still unbroken. Manufacturing these components by forming and blanking offers economical and ecological advantages combined with the needed accuracy. The complexity of producing tools with geometries below 50 {mu}m by conventional manufacturing methods becomes disproportional higher. Expensive serial finishing operations are required to achieve an adequate surface roughness combined with accurate geometry details. A novel approach for producing such tools is the use of advanced etching technologies for monocrystalline silicon that are well-established in the microsystems technology. High-precision vertical geometries with a width down to 5 {mu}m are possible. The present study shows a novel concept using this potential for the blanking of thin copper foils with monocrystallline silicon as a tool material. A self-contained machine-tool with compact outer dimensions was designed to avoid tensile stresses in the brittle silicon punch by an accurate, careful alignment of the punch, die and metal foil. A microscopic analysis of the monocrystalline silicon punch shows appropriate properties regarding flank angle, edge geometry and surface quality for the blanking process. Using a monocrystalline silicon punch with a width of 70 {mu}m blanking experiments on as-rolled copper foils with a thickness of 20 {mu}m demonstrate the general applicability of this material for micro production processes.

  10. The MDT Innovation: Machine-Scoring of Fill-in-the-Blank Tests.

    ERIC Educational Resources Information Center

    Anderson, Paul S.

    The Multi-Digit Technologies (MDT) testing technique is discussed as the first major advance in computer assisted testing in several decades. The MDT testing method uses fill-in-the-blank or completion-type questions, with an alphabetized long list of possible responses. An MDT answer sheet is used to record the code number of the answer. For…

  11. Ultrasonic detection of laminar-type defects in iridium alloy blanks

    SciTech Connect

    Cook, K.V.; Cunningham, R.A. Jr.; Simpson, W.A. Jr.; McClung, R.W.

    1986-07-01

    Encapsulated isotopic heat sources for use in generating electrical power for space applications require flight-quality hardware material. Iridium is the chosen material for such applications, and Oak Ridge National Laboratory has been the prime supplier of iridium alloy forming blanks 52 mm in diameter by 0.66 mm thick (1.0 by 0.026 in.). Prior to the work reported here, these blanks were ultrasonically examined by using 0.9-mm-diam (0.035-in.) simulated flaw standards. However, as a result of this effort, the sensitivity of our ultrasonic pulse-echo test system has been increased. The improved ultrasonic test system permits blank inspection at the 0.5-mm-diam (0.020-in.) simulated flaw detection level. This test system was successfully demonstrated on the initial blanks provided via an improved processing route (consumable arc-melting, extruding, and rolling). The equipment modification and/or selection and the specific focused search unit immersion technique developed to provide this capability are described. The improved flaw detection capability also provides data maps of a common type of defect in iridium (delaminations).

  12. Seismic blanking zones in the deep-water Ullung Basin, East Sea of Korea.

    NASA Astrophysics Data System (ADS)

    Ryu, Byong-Jae; Riedel, Michael; Yoo, Dong-Geun

    2015-04-01

    A total 12366.395 L.km of 2D multichannel seismic data were acquired by the Korea Institute of Geoscience and Mineral Resources (KIGAM) for detecting and mapping seismic indicators for the presence of gas hydrate in the deep-water Ulleung Basin, East Sea of Korea. The seismic data were acquired using Trilogy System of Geco-Prakla, Bolt Air-gun System onboard the R/V TAMHAE II of KIGAM during the years of 2000 to 2004. The seismic faices of shallow sediments were also analyzed to understand the sedimentary strata developed in the basin. Seismic data were processed to define gas hydrate indicators such as bottom simulating reflectors (BSRs) and seismic blank zones. The BSR was identified by (a) its polarity opposite to the seafloor, (b) its seafloor-parallel reflection behavior, and (c) its occurrence at a sub-bottom depth corresponding to the expected base of gas hydrate stability zone, on heat flow and other thermal data for the region and on seismic velocity data. The seismic velocity analysis was also conducted for determining the velocity deviation effect of high-velocity gas hydrate and underlying low-velocity free gas. The BSRs occur mainly in the southern part of the basin where mass transport deposits are widely occurring. A number of vertical to sub-vertical seismic blanking zones were identified in the basin. The blanking zones are near-vertical broad chimney-like structures of reduced seismic reflectivity. They may be formed by gas and/or fluid upwelling through fractures and faults. Many of the blanking zones show apparent velocity pull-up effects of sediment layering structures that are interpreted to be a result of higher velocity gas hydrate. The presence of substantial amounts of gas hydrate in the blank zones were first found by piston coring in 2007, and subsequently confirmed by two deep-drilling expeditions in 2007 and 2010. Most of the blanking zones occur in well-bedded turbidite/hemi-pelagic sediments in the northern deep basin. The

  13. A 3-month intervention of Dance Dance Revolution improves interference control in elderly females: a preliminary investigation.

    PubMed

    Chuang, Lan-Ya; Hung, Hsiao-Yun; Huang, Chung-Ju; Chang, Yu-Kai; Hung, Tsung-Min

    2015-04-01

    Exercise regimens suitable to the elderly remain under investigated; therefore, this study examined the effects of Dance Dance Revolution (DDR) on cognitive control in elderly females. Twenty-six healthy elderly females leading a sedentary lifestyle were assigned to a DDR, brisk walking, or control group. Participants in the DDR and brisk walking groups engaged in moderate physical exercise three times per week for 3 months, whereas the control group maintained a sedentary lifestyle. Each participant performed a flanker task before and after the intervention. The results revealed that both DDR and brisk walking shortened reaction time, N2 latency, and P3 latency relative to those of the control group. These findings suggest that DDR intervention is as effective as that of brisk walking in improving inhibitory control for elderly people. Therefore, DDR can be used as a viable alternative exercise to enhance cognitive function for the elderly and motivate individuals who are less willing to be active. PMID:25595954

  14. A 3-month intervention of Dance Dance Revolution improves interference control in elderly females: a preliminary investigation.

    PubMed

    Chuang, Lan-Ya; Hung, Hsiao-Yun; Huang, Chung-Ju; Chang, Yu-Kai; Hung, Tsung-Min

    2015-04-01

    Exercise regimens suitable to the elderly remain under investigated; therefore, this study examined the effects of Dance Dance Revolution (DDR) on cognitive control in elderly females. Twenty-six healthy elderly females leading a sedentary lifestyle were assigned to a DDR, brisk walking, or control group. Participants in the DDR and brisk walking groups engaged in moderate physical exercise three times per week for 3 months, whereas the control group maintained a sedentary lifestyle. Each participant performed a flanker task before and after the intervention. The results revealed that both DDR and brisk walking shortened reaction time, N2 latency, and P3 latency relative to those of the control group. These findings suggest that DDR intervention is as effective as that of brisk walking in improving inhibitory control for elderly people. Therefore, DDR can be used as a viable alternative exercise to enhance cognitive function for the elderly and motivate individuals who are less willing to be active.

  15. Blank corrections for ramped pyrolysis radiocarbon dating of sedimentary and soil organic carbon.

    PubMed

    Fernandez, Alvaro; Santos, Guaciara M; Williams, Elizabeth K; Pendergraft, Matthew A; Vetter, Lael; Rosenheim, Brad E

    2014-12-16

    Ramped pyrolysis (RP) targets distinct components of soil and sedimentary organic carbon based on their thermochemical stabilities and allows the determination of the full spectrum of radiocarbon ((14)C) ages present in a soil or sediment sample. Extending the method into realms where more precise ages are needed or where smaller samples need to be measured involves better understanding of the blank contamination associated with the method. Here, we use a compiled data set of RP measurements of samples of known age to evaluate the mass of the carbon blank and its associated (14)C signature, and to assess the performance of the RP system. We estimate blank contamination during RP using two methods, the modern-dead and the isotope dilution method. Our results indicate that during one complete RP run samples are contaminated by 8.8 ± 4.4 μg (time-dependent) of modern carbon (MC, fM ∼ 1) and 4.1 ± 5.5 μg (time-independent) of dead carbon (DC, fM ∼ 0). We find that the modern-dead method provides more accurate estimates of uncertainties in blank contamination; therefore, the isotope dilution method should be used with caution when the variability of the blank is high. Additionally, we show that RP can routinely produce accurate (14)C dates with precisions ∼100 (14)C years for materials deposited in the last 10,000 years and ∼300 (14)C years for carbon with (14)C ages of up to 20,000 years.

  16. Sudden unexpected death in infants under 3 months of age and vaccination status – a case-control study

    PubMed Central

    Jonville-Béra, Annie-Pierre; Autret-Leca, Elisabeth; Barbeillon, Florence; Paris-Llado, Josepha

    2001-01-01

    Aims To determine whether DTPP+Hib vaccination (diphtheria, tetanus, pertussis, poliomyelitis +/− haemophilus) increased the risk of sudden unexpected death (SUD) in children under 3 months of age. Methods We conducted a multicentre case-control study in the 28 French ‘SIDS Centers’. Case selection was based on death labelled sudden infant death syndrome (SIDS) of an infant aged between 30 and 90 days. Three living controls were selected, matched for sex, gestational age and born immediately after the victim in the same maternity unit. Results We identified 114 cases of SUD aged between 30 and 90 days and 341 live controls matched for age and sex and born in the same maternity unit as the case. DTPP±Hib immunization did not increase the risk of SUD (OR 1.08) (95% CI 0.49, 2.36) in children under 3 months of age when adjusted for sleeping position, illness in the week before death, maternal tobacco consumption, birth weight, type of mattress, breastfeeding and sex. However, low birth-weight (6.53 [2.29, 18.9]), multiple birth (5.1 [1.76, 15.13]), no breastfeeding (1.77 [1.1, 2.85]), prone sleeping position (9.8 [5, 8, 18, 9]), soft mattress (3.26 [1.69, 6.29]), recent illness (3.44 [1.84, 6.41]) and parental smoking (1.74 [1.2, 2.96]) were confirmed as risk factors in early SIDS. Conclusions DTPP±Hib immunization is not a risk factor for early SUD. In this population, we found the same risk factors as described for SIDS. PMID:11298074

  17. Effect of Intensive Salt-Restriction Education on Clinic, Home, and Ambulatory Blood Pressure Levels in Treated Hypertensive Patients During a 3-Month Education Period.

    PubMed

    Nakano, Masahiro; Eguchi, Kazuo; Sato, Toshiko; Onoguchi, Atsuko; Hoshide, Satoshi; Kario, Kazuomi

    2016-05-01

    The authors tested the hypothesis that low-salt diet education by nutritionists would lower blood pressure (BP) levels in treated hypertensive patients. The amount of urinary salt excretion and clinic, home, and ambulatory BP values at baseline and at 3 months were measured in 95 patients with hypertension. After randomization to a nutritional education group (E group, n=51) or a control group (C group, n=44), the C group received conventional salt-restriction education and the E group received intensive nutritional education aimed at salt restriction to 6 g/d by nutritionists. From baseline to the end of the study, 24-hour urinary sodium excretion was significantly lowered in the E group compared with the C group (6.8±2.9 g/24 h vs 8.6±3.4 g/24 h, P<.01). Morning home systolic BP tended to be lowered in the E group (P=.051), and ambulatory 24-hour systolic BP was significantly lowered in the E group (-4.5±1.3 mm Hg) compared with the C group (2.8±1.3 mm Hg, P<.001). Intensive nutritional education by nutritionists was shown to be effective in lowering BP in treated hypertensive patients. PMID:26732187

  18. Quartz sand as "blank" compound in rehabilitation experience of industrial barren

    NASA Astrophysics Data System (ADS)

    Gorbacheva, T. T.; Ivanova, L. A.; Kikuchi, R.; Gerardo, R.

    2010-05-01

    During 2008 the field test was performed near the smelter complex Monchegorsk (67°51'N, 32°48'E) to estimate suitability of innovate method for site remediation in severe conditions such as in industrial barren. The method is based on cultivation of perennial grasses using hydroponics with thermally inflated vermiculite from local deposit (Kovdor) followed by rolled lawn placement on very contaminated sites near Monchegorsk. Growing in very contaminated ground resulted in 50% rolled lawn surface loss during first year but with biodiversity maintenance. Field experiment was carried out in three variants (1- mineral ground - flat site; 2- mineral ground- slope sites; 3- organogenic ground - flat site in depression in five replicates. More comprehensive results were received for mineral ground due to better natural washing compared to organogenic ground. In all variants we observed secondary roots formation. It seems obvious that plant roots choose the best zones of soils to grow, and that they avoided toxic zones. Observations continued during 2009 to follow freezing influence and nutrient loss rate. We observed grass survival of about 20-30% during second year of field test but grass roots proliferated very slowly in contaminated ground. Affinity to the ground is one of most important estimate of rolled lawn efficiency for grass cover creation. One of possible measure to improve rolled lawn affinity is to establish additional permeable barrier for grass roots isolation from toxic ground. Simultaneously with rolled lawn placement litterbag experiment was carried out with quartz sand as filling. Quartz was chosen as blank compound and as possible material for permeable barrier creation. Original quartz have some initial nutritional status: pH 6.87, available forms of K 1.9 mg g-1, Ca 9.5 mg g-1, Mg 2.8 mg g-1, P 0.4 mg g-1. There was both increasing and decreasing of quartz nutritional status during 2008-2009 period. Besides quartz is recognized to be some barrier

  19. Blank Slate

    ERIC Educational Resources Information Center

    Webber-Thrush, Diane

    2011-01-01

    Ullysses Tucker likes a good challenge. After spending the first 20 years of his career working in media, he entered the development profession in 2000. He worked for the State University of New York Plattsburgh, New Jersey's Montclair State University, Louisiana's Grambling State University, and Western Illinois University before joining London…

  20. A Rapid and Portable DIC Analysis for Aquatic Systems: Rise of the Blanks.

    NASA Astrophysics Data System (ADS)

    Olack, G.; Pfister, C. A.; Wootton, J. T.; Colman, A. S.

    2015-12-01

    Dissolved inorganic carbon analysis, in both fresh water and marine systems, can help determine carbon sources, sinks and flows through an ecosystem (Apongwa et al. 2013). Methods to measure DIC with small quantities in situ are becoming more important as the need for DIC estimation increases across aquatic ecosystems. Recently a number of papers have measured both δ13CVPDB and concentrations by injecting a relatively small amount of sample, e.g. 1 to 2 mL, into prepared sample tubes and then analyzing the headspace gas (Spötl 2004, Torres et al. 2005, Assayag et al. 2006). The initial sampling can be done in the field and samples are stable for weeks to months (Capasso et al. 2005, Taipale and Sonninen 2009) prior to analysis. However, CO2 gas samples can have a contaminant interfering with measurements when concentrations are low, e.g. 0.04% CO2 (Knohl et al. 2004), though the effect can be negligible at higher concentrations, e.g. 1% (Spötl 2005). We investigate fitting a blank correction to a suite of standards to quantify the contamination and more accurately measure the DIC concentration and isotopic values. We examined 6 and 18 month time points, using the suite of standards with δ13CVPDB of 18.69, -2.69 and -16.86 ‰, 2 to 3 mM concentration range. Fitting the blank correction allows us to detect the blank in the 6 month time point. The blank only has a minor effect on the -2.69 and -16.86 ‰ standards, <0.1 ‰, but a significant one for the 18.69 ‰ standard, ~0.4 ‰. Samples run ca. 2 mM in the range of 0 ‰ only see a blank effect in the range of 0.15 ‰, but samples run at < 1 mM show potential shifts of up to 0.8 ‰. The 18 month test showed the tubes are under vacuum—apparently the He diffuses thru the chlorobutyl rubber septa. Those samples can still be analyzed, either by charging them with He so they will not be under vacuum, or running as is and letting the vacuum in the tubes draw in air during the analysis. After correcting for the

  1. Ethyl glucuronide in human hair after daily consumption of 16 or 32 g of ethanol for 3 months.

    PubMed

    Kronstrand, Robert; Brinkhagen, Linda; Nyström, Fredrik H

    2012-02-10

    The overall objectives of the study were to develop a sensitive method for ethyl glucuronide (EtG) determination in hair and then investigate if a low or moderate intake of ethanol could be differentiated from total abstinence. Forty-four subjects were included in the study, 12 males (7 drinkers and 5 abstinent) and 32 females (14 drinkers and 18 abstinent). The study lasted 3 months and the female drinkers consumed one glass (16 g of ethanol) and the males consumed two glasses (32 g of ethanol) of wine (13.5-14%) daily. Hair samples were collected as close as possible above the skin and the proximal 2 cm were analyzed for EtG. Hair was cut into pieces of about 0.5 cm length and washed before incubation overnight in water and then extracted on Clean Screen EtG Carbon columns. The LC/MS/MS system consisted of a Waters ACQUITY UPLC connected to an API 4000 triple quadrupole instrument. Two transitions for EtG and one for the internal standard EtG-D(5) were measured. The method was linear from 60 to 10,000 pg/sample. Imprecision studies were performed at three levels as well as with an authentic sample. Total imprecision was 16% at 200 pg/sample, 8% at 1000 pg/sample, 6% at 8000 pg/sample and 13% at 29 pg/mg in the authentic sample. Of those who drank two glasses of wine every day, four had measurable amounts of EtG in their hair (5-11 pg/mg), and in only one of the females drinking one glass of wine EtG was quantified (3 pg/mg). Among the 23 abstinent subjects two had traces of EtG in the hair. We conclude that persons who ingested 16 or 32 g of ethanol daily for 3 months presented with low concentrations of EtG in hair, well below the proposed threshold for overconsumption set at 30 pg/mg. In addition, none of those who ingested 16 g/day had concentrations over the proposed abstinence threshold of 7 pg/mg. PMID:21367545

  2. Method for fabricating an ultra-low expansion mask blank having a crystalline silicon layer

    SciTech Connect

    Cardinale, Gregory F.

    2002-01-01

    A method for fabricating masks for extreme ultraviolet lithography (EUVL) using Ultra-Low Expansion (ULE) substrates and crystalline silicon. ULE substrates are required for the necessary thermal management in EUVL mask blanks, and defect detection and classification have been obtained using crystalline silicon substrate materials. Thus, this method provides the advantages for both the ULE substrate and the crystalline silicon in an Extreme Ultra-Violet (EUV) mask blank. The method is carried out by bonding a crystalline silicon wafer or member to a ULE wafer or substrate and thinning the silicon to produce a 5-10 .mu.m thick crystalline silicon layer on the surface of the ULE substrate. The thinning of the crystalline silicon may be carried out, for example, by chemical mechanical polishing and if necessary or desired, oxidizing the silicon followed by etching to the desired thickness of the silicon.

  3. Actinic defect counting statistics over 1 cm2 area of EUVL mask blank

    SciTech Connect

    Jeong, Seongtae; Lai, Chih-Wei; Rekawa, Seno; Walton, Chris W.; Bokor, Jeffrey

    2000-02-18

    As a continuation of comparison experiments between EUV inspection and visible inspection of defects on EUVL mask blanks, we report on the result of an experiment where the EUV defect inspection tool is used to perform at-wavelength defect counting over 1 cm{sup 2} of EUVL mask blank. Initial EUV inspection found five defects over the scanned area and the subsequent optical scattering inspection was able to detect all of the five defects. Therefore, if there are any defects that are only detectable by EUV inspection, the density is lower than the order of unity per cm2. An upgrade path to substantially increase the overall throughput of the EUV inspection system is also identified in the manuscript.

  4. A Grain Structure Model based on Voronoi polygon of Non- oriented Electrical Steel in Blanking Process

    NASA Astrophysics Data System (ADS)

    Wang, Zhe; Li, Shuhui; Dong, Liang; He, Ji

    2016-08-01

    World-wide there is a trend to develop higher permeability grades, thin thickness and coarse grain of non-oriented electrical steels, a core function material of motors. Blanking is the most popular technique for producing the motor laminations. However, the deformation of material is significantly influenced by grain size. In this paper, Voronoi polygon is used for generate the random microstructures of the studied non-oriented electrical steel. Finite Element (FE) model considering grain size is thus established to analysis the blanking process. The material behaviour of grains is derived from the widely accepted surface layer model. Compared to the conventional model without considering the grain size, the novel model shows good matching with the experimental results.

  5. Amplitude blanking related to the pore-filling of gas hydrate in sediments

    USGS Publications Warehouse

    Lee, M.W.; Dillon, William P.

    2001-01-01

    Seismic indicators of gas-hydrate-bearing sediments include elevated interval velocities and amplitude reduction of seismic reflections owing to the presence of gas hydrate in the sediment's pore spaces. However, large amplitude blanking with relatively low interval velocities observed at the Blake Ridge has been enigmatic because realistic seismic models were absent to explain the observation. This study proposes models in which the gas hydrate concentrations vary in proportion to the porosity. Where gas hydrate concentrations are greater in more porous media, a significant amplitude blanking can be achieved with relatively low interval velocity. Depending on the amount of gas hydrate concentration in the pore space, reflection amplitudes from hydrate-bearing sediments can be much less, less or greater than those from corresponding non-hydrate-bearing sediments.

  6. Fill in the blank: culture jamming and the advertising of agency.

    PubMed

    Lambert-Beatty, Carrie

    2010-01-01

    This article is a review on billboard liberation and some other proj-ects that develop the idea of talking back or over advertising in a playful and youthful way. In one of them, Ji Lee's Bubble Project, an artist places blank thought-bubble stickers on street advertisements and waits to see what people write on them, completing the work of art and transgression. In other initiative, blank pages with the word God were placed around the city in place of advertising, inviting people to complete the prayer/complaint and to participate in a Suggestion Box, a project that collected "suggestions" from people out in the street. A review of playful and youthful ways to "rebel" against the impositions of powers like media and advertising. PMID:20391621

  7. Randomized, double-blind, 3-month parallel study of the effects of pramipexole, pergolide, and placebo on Parkinsonian tremor.

    PubMed

    Navan, Prithiva; Findley, Leslie J; Jeffs, Jim A R; Pearce, Ronald K B; Bain, Peter G

    2003-11-01

    We compared the antitremor effect of pramipexole, pergolide, or placebo in Parkinson's disease (PD). A double-blind, randomly controlled, parallel protocol was deployed to examine the effects of placebo, pergolide, and pramipexole [doses escalated to 1.5 mg three times daily (t.i.d.) over 3 months] on a compound Tremor Index (TI) and Unified Parkinson's Disease Rating Scale (UPDRS) part III. Thirty PD patients (19 men, 11 women; mean age 69 years, range 54-80 years; mean disease duration 3.9 years, range, 0.5-10 years) participated in the study, with 10 patients in each arm. Six subjects failed to complete the study (4 on pergolide and 2 on placebo). Analysis of covariance demonstrated strong evidence for a treatment effect on both TI and UPDRS III. There was no significant difference between the active treatments on either TI or UPDRS III. Both pergolide and pramipexole were significantly better than placebo. The results indicate that pergolide and pramipexole (1.5 mg t.i.d.) have similar anti-PD tremor and UPDRS III actions that are significantly superior to placebo. Patients on pergolide were more likely to drop out because of adverse events than those on pramipexole.

  8. The transition to coparenthood: parents' pre-birth expectations and early coparental adjustment at 3 months postpartum.

    PubMed

    McHale, James P; Kazali, Christina; Rotman, Tamir; Talbot, Jean; Carleton, Meagan; Lieberson, Rebecca

    2004-01-01

    In the decade since the first observationally based empirical studies of coparenting process in nuclear families made their mark, most investigations of early coparenting dynamics have examined whether and how such dynamics drive child development trajectories, rather than identifying factors that may contribute to the differential development of such dynamics in the first place. In this prospective study, we examined both individual-representational and dyadic-interpersonal predictors of early coparental process. Fifty married couples expecting their first child portrayed their expectations and concerns about family life after the baby's arrival, and took part in a set of problem-solving tasks used to help evaluate marital quality. Both mothers' and fathers' prebaby expectations about the future family, and prenatal marital quality, predicted observed coparenting cohesion at 3 months postpartum. Maternal- and marriage-coparenting trajectories differed as a function of infant characteristics, with pathways most pronounced when infants were rated high in negative reactivity. Results reveal how the prenatal environment can come to shape early coparenting process, and indicate that family models must take into account the role that child characteristics can play in altering prebirth-postpartum pathways.

  9. A 3-month-old infant with recurrent apparent life-threatening events in a car seat.

    PubMed

    DelRosso, Lourdes M

    2015-04-01

    A 3-month-old infant was brought to clinic for evaluation of recurrent apparent life-threatening events (ALTEs). Two ALTE episodes occurred while the infant was sleeping in a safety car seat. The first one occurred when he was 4 weeks old. His mother noticed that he was not breathing; he appeared limp with full body cyanosis. His mother picked him up from the car seat, and he started breathing spontaneously and without any sign of distress. His skin color returned to normal. He was evaluated at the ED where the physical examination was normal. He was hospitalized 1 day for observation. During this time, workup, including ECG and chest radiograph, was normal. The parents were instructed on cardiorespiratory resuscitation and recommended to change car seats. The infant was discharged with an apnea monitor. He wore the apnea monitor while in the car seat. A second similar episode occurred at 10 weeks of age for which he was seen at the ED and referred to our clinic for further evaluation. Neither episode was related to feeding. PMID:25846540

  10. Higher Retail Prices of Sugar-Sweetened Beverages 3 Months After Implementation of an Excise Tax in Berkeley, California

    PubMed Central

    Rojas, Nadia; Grummon, Anna H.; Madsen, Kristine A.

    2015-01-01

    Objectives. We assessed the short-term ability to increase retail prices of the first US 1-cent-per-ounce excise tax on the distribution of sugar-sweetened beverages (SSBs), which was implemented in March 2015 by Berkeley, California. Methods. In 2014 and 2015, we examined pre- to posttax price changes of SSBs and non-SSBs in a variety of retailers in Berkeley and in the comparison cities Oakland and San Francisco, California. We examined price changes by beverage, brand, size, and retailer type. Results. For smaller beverages (≤ 33.8 oz), price increases (cents/oz) in Berkeley relative to those in comparison cities were 0.69 (95% confidence interval [CI] = 0.36, 1.03) for soda, 0.47 (95% CI = 0.08, 0.87) for fruit-flavored beverages, and 0.47 (95% CI = 0.25, 0.69) for SSBs overall. For 2-liter bottles and multipacks of soda, relative price increases were 0.46 (95% CI = 0.03, 0.89) and 0.49 (95% CI = 0.21, 0.77). We observed no relative price increases for nontaxed beverages overall. Conclusions. Approximately 3 months after the tax was implemented, SSB retail prices increased more in Berkeley than in nearby cities, marking a step in the causal pathway between the tax and reduced SSB consumption. PMID:26444622

  11. Formability Analysis of Diode-Laser-Welded Tailored Blanks of Advanced High-Strength Steel Sheets

    NASA Astrophysics Data System (ADS)

    Panda, S. K.; Baltazar Hernandez, V. H.; Kuntz, M. L.; Zhou, Y.

    2009-08-01

    Currently, advances due to tailored blanking can be enhanced by the development of new grades of advanced high-strength steels (HSSs), for the further weight reduction and structural improvement of automotive components. In the present work, diode laser welds of three different grades of advanced high-strength dual-phase (DP) steel sheets (with tensile strengths of 980, 800, and 450 MPa) to high-strength low-alloy (HSLA) material were fabricated by applying the proper welding parameters. Formability in terms of Hecker’s limiting dome height (LDH), the strain distribution on the hemispherical dome surface, the weld line movement during deformation, and the load-bearing capacity during the stretch forming of these different laser-welded blanks were compared. Finite element (FE) analysis of the LDH tests of both the parent metals and laser-welded blanks was done using the commercially available software package LS-DYNA (Livermore Software Technology Corporation, Livermore, CA); the results compared well with the experimental data. It was also found that the LDH was not affected by the soft zone or weld zone properties; it decreased, however, with an increase in a nondimensional parameter, the “strength ratio” (SR). The weld line movement during stretch forming is an indication of nonuniform deformation resulting in a decrease in the LDH. In all the dissimilar weldments, fracture took place on the HSLA side, but the fracture location shifted to near the weld line (at the pole) in tailor-welded blanks (TWBs) of a higher strength ratio.

  12. Process optimization for particle removal on blank chrome mask plates in preparation for resist application

    NASA Astrophysics Data System (ADS)

    Osborne, Stephen; Smith, Eryn; Woster, Eric; Pelayo, Anthony

    2002-03-01

    As integrated circuits require smaller lines to provide the memory and processing capability for tomorrow's marketplace, the photomask industry is adopting higher contrast resists to improve photomask lithography. Photomask yield for several high-contrast resist recipes may be improved by coating masks at the mask shop. When coating at a mask shop, an effective method is available that uses coat/bake cluster tools to ensure blanks are clean prior to coating. Many high-contrast resists are available, and some are more susceptible to time-dependent performance factors than conventional resists. One of these factors is the time between coating and writing. Although future methods may reduce the impact of this factor, one current trend is to reduce this time by coating plates at the mask shop just prior to writing. Establishing an effective process to clean blanks prior to coating is necessary for product quality control and is a new task that is critical for maskmakers who previously purchased mask plates but have decided to begin coating them within their facility. This paper provides a strategy and method to be used within coat/bake cluster tools to remove particle contamination from mask blanks. The process uses excimer-UV ionizing radiation and ozone to remove organic contaminants, and then uses a wet process combined with megasonic agitation, surfactant, and spin forces. Megasonic agitation with surfactant lifts up particles, while the convective outflow of water enhances centripetal shear without accumulating harmful charge.

  13. High-Speed Friction-Stir Welding To Enable Aluminum Tailor-Welded Blanks

    SciTech Connect

    Hovanski, Yuri; Upadhyay, Piyush; Carsley, John; Luzanski, Tom; Carlson, Blair; Eisenmenger, Mark; Soulami, Ayoub; Marshall, Dustin; Landino, Brandon; Hartfield-Wunsch, Susan

    2015-05-01

    Current joining technologies for automotive aluminum alloys are utilized in low-volume and niche applications, and have yet to be scaled for the high-volume vehicle market. This study targeted further weight reduction, part reduction, and cost savings by enabling tailor-welded blank technology for aluminum alloys at high-volumes. While friction stir welding has been traditionally applied at linear velocities less than one meter per minute, high volume production applications demand the process be extended to higher velocities more amenable to cost sensitive production environments. Unfortunately, weld parameters and performance developed and characterized at low to moderate welding velocities do not directly translate to high speed linear friction stir welding. Therefore, in order to facilitate production of high volume aluminum welded components, parameters were developed with a minimum welding velocity of three meters per minute. With an emphasis on weld quality, welded blanks were evaluated for post-weld formability utilizing a combination of numerical and experimental methods. Evaluation across scales was ultimately validated by stamping full-size production door inner panels made from dissimilar thickness aluminum tailor-welded blanks, which provided validation of the numerical and experimental analysis of laboratory scale tests.

  14. High-Speed Friction-Stir Welding to Enable Aluminum Tailor-Welded Blanks

    NASA Astrophysics Data System (ADS)

    Hovanski, Yuri; Upadhyay, Piyush; Carsley, John; Luzanski, Tom; Carlson, Blair; Eisenmenger, Mark; Soulami, Ayoub; Marshall, Dustin; Landino, Brandon; Hartfield-Wunsch, Susan

    2015-05-01

    Current welding technologies for production of aluminum tailor-welded blanks (TWBs) are utilized in low-volume and niche applications, and they have yet to be scaled for the high-volume vehicle market. This study targeted further weight reduction, part reduction, and cost savings by enabling tailor-welded blank technology for aluminum alloys at high volumes. While friction-stir welding (FSW) has been traditionally applied at linear velocities less than 1 m/min, high-volume production applications demand the process be extended to higher velocities more amenable to cost-sensitive production environments. Unfortunately, weld parameters and performance developed and characterized at low-to-moderate welding velocities do not directly translate to high-speed linear FSW. Therefore, to facilitate production of high-volume aluminum FSW components, parameters were developed with a minimum welding velocity of 3 m/min. With an emphasis on weld quality, welded blanks were evaluated for postweld formability using a combination of numerical and experimental methods. An evaluation across scales was ultimately validated by stamping full-size production door inner panels made from dissimilar thickness aluminum TWBs, which provided validation of the numerical and experimental analysis of laboratory-scale tests.

  15. Mother-preterm infant interactions at 3 months of corrected age: influence of maternal depression, anxiety and neonatal birth weight

    PubMed Central

    Neri, Erica; Agostini, Francesca; Salvatori, Paola; Biasini, Augusto; Monti, Fiorella

    2015-01-01

    Maternal depression and anxiety represent risk factors for the quality of early mother-preterm infant interactions, especially in the case of preterm birth. Despite the presence of many studies on this topic, the comorbidity of depressive and anxious symptoms has not been sufficiently investigated, as well as their relationship with the severity of prematurity and the quality of early interactions. The Aim of this study was to evaluate the quality of early mother-infant interactions and the prevalence of maternal depression and anxiety comparing dyads of extremely low birth weight (ELBW) and very low birth weight (VLBW) preterm infants with full-term ones. Seventy seven preterm infants (32 ELBW; 45 VLBW) and 120 full term (FT) infants and their mothers were recruited. At 3 months of corrected age, 5 min of mother-infant interactions were recorded and later coded through the Global Ratings Scales. Mothers completed the Edinburgh Postnatal Depression Scale and Penn State Worry Questionnaire. Infant levels of development were assessed through the Griffiths Mental Development Scales. A relation emerged among the severity of prematurity, depression, anxiety, and the quality of interactions. When compared with the FT group, the ELBW interactions were characterized by high maternal intrusiveness and low remoteness, while the VLBW dyads showed high levels of maternal sensitivity and infant communication. Depression was related to maternal remoteness and negative affective state, anxiety to low sensitivity, while infant interactive behaviors were impaired only in case of comorbidity. ELBW’s mothers showed the highest prevalence of depressive and anxious symptoms; moreover, only in FT dyads, low maternal sensitivity, negative affective state and minor infant communication were associated to the presence of anxious symptoms. The results confirmed the impact of prematurity on mother–infant interactions and on maternal affective state. Early diagnosis can help to plan

  16. How a hat may affect 3-month-olds' recognition of a face: an eye-tracking study.

    PubMed

    Bulf, Hermann; Valenza, Eloisa; Turati, Chiara

    2013-01-01

    Recent studies have shown that infants' face recognition rests on a robust face representation that is resilient to a variety of facial transformations such as rotations in depth, motion, occlusion or deprivation of inner/outer features. Here, we investigated whether 3-month-old infants' ability to represent the invariant aspects of a face is affected by the presence of an external add-on element, i.e. a hat. Using a visual habituation task, three experiments were carried out in which face recognition was investigated by manipulating the presence/absence of a hat during face encoding (i.e. habituation phase) and face recognition (i.e. test phase). An eye-tracker system was used to record the time infants spent looking at face-relevant information compared to the hat. The results showed that infants' face recognition was not affected by the presence of the external element when the type of the hat did not vary between the habituation and test phases, and when both the novel and the familiar face wore the same hat during the test phase (Experiment 1). Infants' ability to recognize the invariant aspects of a face was preserved also when the hat was absent in the habituation phase and the same hat was shown only during the test phase (Experiment 2). Conversely, when the novel face identity competed with a novel hat, the hat triggered the infants' attention, interfering with the recognition process and preventing the infants' preference for the novel face during the test phase (Experiment 3). Findings from the current study shed light on how faces and objects are processed when they are simultaneously presented in the same visual scene, contributing to an understanding of how infants respond to the multiple and composite information available in their surrounding environment.

  17. Topography and raytracing analysis of patients with excellent visual acuity 3 months after excimer laser photorefractive keratectomy for myopia.

    PubMed

    Maguire, L J; Zabel, R W; Parker, P; Lindstrom, R L

    1991-01-01

    We performed topography and raytracing analysis 3 months after surgery on five consecutive eyes of five patients, which had excimer laser photorefractive keratectomy for myopia. Three of the five eyes had uncorrected postoperative visual acuity of 20/20 or better. Two eyes had an uncorrected vision of 20/40. In three of five eyes, the area of excimer ablation was centered within 1.0 mm of the optical axis. Three other eyes showed decentration that ranged from 1.1 to 1.5 mm. The range of surface power seen within 2 mm of the central keratoscope ring was as follows: patient CK = 37.50 to 39.50 diopters; patient CA = 40.50 D to 44.80 D; patient CW = 37.90 D to 42.20 D; patient AC = 35.50 D to 39.00 D; patient DT = 34.50 D to 41.40 D. Topography patterns differed from eye to eye. A raytracing program modeled refraction of 20/80 and 20/20 "E" of 100%, 50%, 25%, 12.5% and 6.25% contrast through all measured points on the central 10 keratoscope rings of the five postoperative corneas. The five computer-derived images were ranked subjectively according to the observed degree of image degradation by three observers. Two eyes showed discernible 20/20 E's even at the 12.5% contrast level. Little to no ghost image was seen. Two eyes showed degraded but discernible 20/20 letters at higher levels of contrast only. These eyes showed moderate ghost images that were most apparent in the high-contrast 20/80 letters. One eye showed poor resolution of the 100% contrast 20/20 letter and moderately severe ghost images.(ABSTRACT TRUNCATED AT 250 WORDS) PMID:2043557

  18. Population Pharmacokinetics Analysis To Inform Efavirenz Dosing Recommendations in Pediatric HIV Patients Aged 3 Months to 3 Years.

    PubMed

    Luo, Man; Chapel, Sunny; Sevinsky, Heather; Savant, Ishani; Cirincione, Brenda; Bertz, Richard; Roy, Amit

    2016-06-01

    Efavirenz (EFV) is a nonnucleoside reverse transcriptase inhibitor approved worldwide for the treatment of HIV in adults and children over 3 years of age or weighing over 10 kg. Only recently EFV was approved in children over 3 months and weighing at least 3.5 kg in the United States and the European Union. The objective of this analysis was to support the selection of an appropriate dose for this younger pediatric population and to explore the impact of CYP2B6 genetic polymorphisms on EFV systemic exposures. A population pharmacokinetic (PPK) model was developed using data from three studies in HIV-1-infected pediatric subjects (n = 168) and one study in healthy adults (n = 24). The EFV concentration-time profile was best described by a two-compartment model with first-order absorption and elimination. Body weight was identified as a significant predictor of efavirenz apparent clearance (CL), oral central volume of distribution (VC), and absorption rate constant (Ka). The typical values of efavirenz apparent CL, VC, oral peripheral volume of distribution (VP), and Ka for a reference pediatric patient were 4.8 liters/h (4.5 to 5.1 liters/h), 84.9 liters (76.8 to 93.0 liters), 287 liters (252.6 to 321.4 liters), and 0.414 h(-1) (0.375 to 0.453 h(-1)), respectively. The final model was used to simulate steady-state efavirenz concentrations in pediatric patients weighing <10 kg to identify EFV doses that produce comparable exposure to adult and pediatric patients weighing ≥10 kg. Results suggest that administration of EFV doses of 100 mg once daily (QD) to children weighing ≥3.5 to <5 kg, 150 mg QD to children weighing ≥5 to <7.5 kg, and 200 mg QD to children weighing ≥7.5 to <10 kg produce exposures within the target range. Further evaluation of the impact of CYP2B6 polymorphisms on EFV PK showed that the identification of CYP2B6 genetic status is not predictive of EFV exposure and thus not informative to guide pediatric dosing regimens. PMID:27067333

  19. Factors associated with morbidity, mortality, and growth of dairy heifer calves up to 3 months of age.

    PubMed

    Windeyer, M C; Leslie, K E; Godden, S M; Hodgins, D C; Lissemore, K D; LeBlanc, S J

    2014-02-01

    Calfhood disease is an important problem on many dairy operations that can have substantial effects on heifer survival and productivity, and has economic and welfare impacts. Neonatal calf diarrhea (NCD) and bovine respiratory disease (BRD) are the most common causes of morbidity and mortality in young dairy cattle. The objective of this observational study was to investigate factors associated with the risks of morbidity and mortality, and with growth, in commercial dairy heifers calves. A total of 2874 heifer calves from 19 commercial dairy farms in Minnesota and Ontario were enrolled at 1-7 days of age and followed for approximately 3 months. Using cut-points of serum total protein of 5.2 and 5.7 g/dl, the incidences of failure of transfer of passive immunity (FTPI) were 11 and 32%, respectively. A cut-point of 5.7 g/dl was the most predictive of BRD before 5 weeks of age (sensitivity=40%, specificity=69%). The positive predictive value was poor (PPV=18%), but the negative predictive value was good (NPV=87%). A cut-point of 5.2g/dl was most predictive of death before 5 weeks of age (sensitivity=27%, specificity=89%, PPV=5%, NPV=98%). Serum total protein during the first week of life was a poor predictor of NCD. Over 23% of calves were treated for diarrhea. Risk factors were weight at enrollment, other diseases before 2 weeks of age, and an interaction between season of birth and herd-level incidence of NCD. Almost 22% of calves were treated at least once for BRD. Factors associated with an increased risk of BRD included herd-level incidence of BRD, season of birth, navel dipping, other diseases before 2 weeks of age, failure of transfer of passive immunity, and manual control of temperature in pre-weaning housing. Administration of supplemental antibody products at birth was associated with a reduced incidence of BRD. Overall mortality was 3.5%. Risk of mortality was increased by treatment for BRD and other diseases. The mean average weight gain was 0.95 kg

  20. Population Pharmacokinetics Analysis To Inform Efavirenz Dosing Recommendations in Pediatric HIV Patients Aged 3 Months to 3 Years.

    PubMed

    Luo, Man; Chapel, Sunny; Sevinsky, Heather; Savant, Ishani; Cirincione, Brenda; Bertz, Richard; Roy, Amit

    2016-06-01

    Efavirenz (EFV) is a nonnucleoside reverse transcriptase inhibitor approved worldwide for the treatment of HIV in adults and children over 3 years of age or weighing over 10 kg. Only recently EFV was approved in children over 3 months and weighing at least 3.5 kg in the United States and the European Union. The objective of this analysis was to support the selection of an appropriate dose for this younger pediatric population and to explore the impact of CYP2B6 genetic polymorphisms on EFV systemic exposures. A population pharmacokinetic (PPK) model was developed using data from three studies in HIV-1-infected pediatric subjects (n = 168) and one study in healthy adults (n = 24). The EFV concentration-time profile was best described by a two-compartment model with first-order absorption and elimination. Body weight was identified as a significant predictor of efavirenz apparent clearance (CL), oral central volume of distribution (VC), and absorption rate constant (Ka). The typical values of efavirenz apparent CL, VC, oral peripheral volume of distribution (VP), and Ka for a reference pediatric patient were 4.8 liters/h (4.5 to 5.1 liters/h), 84.9 liters (76.8 to 93.0 liters), 287 liters (252.6 to 321.4 liters), and 0.414 h(-1) (0.375 to 0.453 h(-1)), respectively. The final model was used to simulate steady-state efavirenz concentrations in pediatric patients weighing <10 kg to identify EFV doses that produce comparable exposure to adult and pediatric patients weighing ≥10 kg. Results suggest that administration of EFV doses of 100 mg once daily (QD) to children weighing ≥3.5 to <5 kg, 150 mg QD to children weighing ≥5 to <7.5 kg, and 200 mg QD to children weighing ≥7.5 to <10 kg produce exposures within the target range. Further evaluation of the impact of CYP2B6 polymorphisms on EFV PK showed that the identification of CYP2B6 genetic status is not predictive of EFV exposure and thus not informative to guide pediatric dosing regimens.

  1. Population Pharmacokinetics Analysis To Inform Efavirenz Dosing Recommendations in Pediatric HIV Patients Aged 3 Months to 3 Years

    PubMed Central

    Luo, Man; Chapel, Sunny; Sevinsky, Heather; Savant, Ishani; Cirincione, Brenda; Bertz, Richard

    2016-01-01

    Efavirenz (EFV) is a nonnucleoside reverse transcriptase inhibitor approved worldwide for the treatment of HIV in adults and children over 3 years of age or weighing over 10 kg. Only recently EFV was approved in children over 3 months and weighing at least 3.5 kg in the United States and the European Union. The objective of this analysis was to support the selection of an appropriate dose for this younger pediatric population and to explore the impact of CYP2B6 genetic polymorphisms on EFV systemic exposures. A population pharmacokinetic (PPK) model was developed using data from three studies in HIV-1-infected pediatric subjects (n = 168) and one study in healthy adults (n = 24). The EFV concentration-time profile was best described by a two-compartment model with first-order absorption and elimination. Body weight was identified as a significant predictor of efavirenz apparent clearance (CL), oral central volume of distribution (VC), and absorption rate constant (Ka). The typical values of efavirenz apparent CL, VC, oral peripheral volume of distribution (VP), and Ka for a reference pediatric patient were 4.8 liters/h (4.5 to 5.1 liters/h), 84.9 liters (76.8 to 93.0 liters), 287 liters (252.6 to 321.4 liters), and 0.414 h−1 (0.375 to 0.453 h−1), respectively. The final model was used to simulate steady-state efavirenz concentrations in pediatric patients weighing <10 kg to identify EFV doses that produce comparable exposure to adult and pediatric patients weighing ≥10 kg. Results suggest that administration of EFV doses of 100 mg once daily (QD) to children weighing ≥3.5 to <5 kg, 150 mg QD to children weighing ≥5 to <7.5 kg, and 200 mg QD to children weighing ≥7.5 to <10 kg produce exposures within the target range. Further evaluation of the impact of CYP2B6 polymorphisms on EFV PK showed that the identification of CYP2B6 genetic status is not predictive of EFV exposure and thus not informative to guide pediatric dosing regimens. PMID:27067333

  2. Indications for laboratory tests in primary care: assessment of the most frequent indications and requests with blank clinical information

    PubMed Central

    Salinas, Maria; López-Garrigós, Maite; Flores, Emilio; Leiva-Salinas, Maria; Esteban, Patricia; Ahumada, Miguel; Leiva-Salinas, Carlos

    2016-01-01

    Introduction The aim of this work is twofold. Firstly, to study the temporal evolution in the number of laboratory requests from primary care without clinical indication, and to analyse the number of such requests before and after the implementation of an automated requesting procedure. Secondly, to investigate what are the most frequent clinical indications that prompted laboratory testing. Materials and methods This is a retrospective observational study conducted from January 2009 to December 2015. We counted the requests without clinical question, calculated the number of such requests per total number of requests and listed the most frequent indications. Results The number of tests requests with a blank clinical indication was significantly higher in 2009 when compared to 2015 (80% vs. 20%; P < 0.001). For every year in this 7-year period, dyslipidemia, essential hypertension and diabetes were the most prevalent diagnoses that prompted a laboratory test in primary care, accounting for more than 20% of all indications. Conclusions The number of primary care requests without patient clinical question has decreased after the implementation of an automated requesting procedure. Disorders of lipid metabolism, essential hypertension and diabetes mellitus were the most prevalent diagnoses that prompted a laboratory test in primary care. PMID:27812310

  3. EUV actinic blank inspection tool with a high magnification review mode

    NASA Astrophysics Data System (ADS)

    Suzuki, Tomohiro; Miyai, Hiroki; Takehisa, Kiwamu; Kusunose, Haruhiko; Yamane, Takeshi; Terasawa, Tsuneo; Watanabe, Hidehiro; Inoue, Soichi; Mori, Ichiro

    2012-06-01

    Because the realization of defect-free Extreme Ultra-violet Lithography (EUVL) mask blanks is uncertain, the defect mitigation techniques are becoming quite important. One mitigation technique, "Pattern shift", is a technique that places a device pattern to cover multilayer (ML) defects underneath the absorber pattern in such a way that the ML defects are not printed onto wafers. This mitigation method requires the defect coordinate accuracy of down to tens of nanometers. Consequently, there is a strong demand for a Blank Inspection tool that is capable of providing such defect coordinate accuracy. To meet such requirement, we have started to develop a high accuracy defect locating function as an optional feature to our EUV Actinic Blank Inspection (ABI) system which is currently being developed aiming at HVM hp16 nm-11 nm node. Since a 26x Schwarzschild optics is used in this inspection tool, it is quite difficult to pinpoint defect location with high accuracy. Therefore we have decided to realize a high magnification review optics of 600x or higher by adding two mirrors to the Schwarzschild optics. One of the additional two mirrors is retractable so that the magnification can be switched according to the purpose of inspections. The high magnification review mode locates defect coordinates accurately with respect to the fiducial position. We set the accuracy target at 20 nm so that the mitigation technique can be implemented successfully. The optical configuration proposed in this paper allows both a high speed inspection for HVM and a high accuracy defect locating function to be achieved on one inspection system.

  4. Cone of Darkness: Finding Blank-sky Positions for Multi-object Wide-field Observations

    NASA Astrophysics Data System (ADS)

    Lorente, N. P. F.

    2014-05-01

    We present the Cone of Darkness, an application to automatically configure blank-sky positions for a series of stacked, wide-field observations, such as those carried out by the SAMI instrument on the Anglo-Australian Telescope (AAT). The Sydney-AAO Multi-object Integral field spectrograph (SAMI) uses a plug-plate to mount its 13×61 core imaging fibre bundles (hexabundles) in the optical plane at the telescope's prime focus. To make the most efficient use of each plug-plate, several observing fields are typically stacked to produce a single plate. When choosing blank-sky positions for the observations it is most effective to select these such that one set of 26 holes gives valid sky positions for all fields on the plate. However, when carried out manually this selection process is tedious and includes a significant risk of error. The Cone of Darkness software aims to provide uniform blank-sky position coverage over the field of observation, within the limits set by the distribution of target positions and the chosen input catalogs. This will then facilitate the production of the best representative median sky spectrum for use in sky subtraction. The application, written in C++, is configurable, making it usable for a range of instruments. Given the plate characteristics and the positions of target holes, the software segments the unallocated space on the plate and determines the position which best fits the uniform distribution requirement. This position is checked, for each field, against the selected catalog using a TAP ADQL search. The process is then repeated until the desired number of sky positions is attained.

  5. A numerical study on intended and unintended failure mechanisms in blanking of sandwich plates

    NASA Astrophysics Data System (ADS)

    Chen, L.; Soyarslan, C.; Tekkaya, A. E.

    2013-05-01

    Metal-polymer-metal sandwich plates are widely used in the automotive and aerospace industry. As for different applications the sandwich plates can be divided into two types. They are sound-damping laminates with a polymer core much thinner than the metallic faces and low-density laminates with a core thickness of approximately 40-60% of the total thickness. One frequent process step in production of parts made of these plates is the blanking process whose hereditary effects draw the limits of further forming stages or service performance and life; e.g. the failure of the adhesive in the thermoplastic polymer interface affects the sound-damping efficiency intensively. With this motivation, we present FE simulation of an axi-symmetric blanking process of steel/polyethylene/steel sound-damping laminates. The mechanical behavior of the metallic layers was characterized by finite strain rate independent elasto-plasticity where progressive material deterioration and fracture are given account for using continuum damage mechanics (CDM). This material model is made accessible via implementations as VUMAT subroutines for ABAQUS/Explicit. Possible failure of the thermoplastic polymer which may lead to delamination of the metallic layers is modeled using ABAQUS built-in cohesive zone elements. The results show that existing intended and unintended failure modes, e.g. blanking of the metallic and thermoplastic polymer constituents as well as failure of polymer layer under shear and compression, can be effectively studied with the proposed framework for process enhancement. As a future work, a damage coupled nonlinear visco-elastic constitutive model will be devised for the simulation of the thermoplastic layer in low-density laminates.

  6. Comparing Laser Welding Technologies with Friction Stir Welding for Production of Aluminum Tailor-Welded Blanks

    SciTech Connect

    Hovanski, Yuri; Carsley, John; Carlson, Blair; Hartfield-Wunsch, Susan; Pilli, Siva Prasad

    2014-01-15

    A comparison of welding techniques was performed to determine the most effective method for producing aluminum tailor-welded blanks for high volume automotive applications. Aluminum sheet was joined with an emphasis on post weld formability, surface quality and weld speed. Comparative results from several laser based welding techniques along with friction stir welding are presented. The results of this study demonstrate a quantitative comparison of weld methodologies in preparing tailor-welded aluminum stampings for high volume production in the automotive industry. Evaluation of nearly a dozen welding variations ultimately led to down selecting a single process based on post-weld quality and performance.

  7. Advanced laser heat treatment with respect for the application for Tailored Heat Treated Blanks

    NASA Astrophysics Data System (ADS)

    Merklein, Marion; Nguyen, Hung

    Aluminum alloys offer a great potential for lightweight construction. By application of Tailored Heat Treated Blanks (THTB), the feasibility of complex car parts out of aluminum alloys can be enhanced decisively. To extend the process window for forming of aluminum, a large scale area has to be heat treated. Accordingly, this paper deals with the large scale heat treatment via laser radiation. Thereby, a multi-path heating strategy is developed and discussed. In order to get a sharp transition area, different cooling methods and the influence on the heat distribution is qualified as well. In this context, the temperature and hardness are measured.

  8. Corrective finishing of extreme ultraviolet photomask blanks by precessed bonnet polisher.

    PubMed

    Beaucamp, Anthony; Namba, Yoshiharu; Charlton, Phillip

    2014-05-10

    The progressive transition from Excimer to extreme ultraviolet (EUV) lithography is driving a need for flatter and smoother photomask blanks. It is, however, proving difficult to meet the next-generation specification with the conventional chemical mechanical polishing technology commonly used for finishing photomask blanks. This paper reports on the application of subaperture computer numerical control precessed bonnet polishing technology to the corrective finishing of photomask substrates for EUV lithography. Full-factorial analysis was used to identify process parameters capable of delivering microroughness below 0.5 nm rms while retaining relatively high removal rates. Experimental results show that masks prepolished to 300-600 nm peak-to-valley (P-V) flatness by chemical/mechanical polishing can then be improved down to 50-100 nm P-V flatness using the automated technology described in this paper. A series of edge polishing experiments also hints at the possibility of increasing the quality area beyond the 142 mm square defined in the official EUV photomask specification. PMID:24922029

  9. Recycled content sign blanks. Final research report, December 1994-September 1996

    SciTech Connect

    Roschke, P.N.; Harrison, B.F.; Benson, F.

    1996-10-01

    This report documents a study of the feasibility of using sign blanks constructed of reclaimed materials instead of conventional high-grade plywood and aluminum. Traditional sign substrates constructed of wood and aluminum currently are not designed according to engineering formulas. Lack of design and analysis procedures integrated with a set of performance specifications has made it difficult to apply results to field tests conducted by various highway departments. This study presents the engineering techniques necessary for judicious use of recycled materials in roadside sign applications. Various types of recycled materials were solicited from commercial manufacturers and subjected to an array of laboratory tests and numerical simulations. Materials that were received were manufactured from variety of materials including high-density polyethylene, polycarbonate, polyvinyl chloride, and calcium carbonate. This study discusses analysis, performance, and properties of tested materials. A total of seven recycled materials are tested in flexure, uni-axial tension, creep, free vibration, and exposure to ultraviolet radiation. Corollaires of this study are development of performance-based specifications and a new design procedure for sign blanks.

  10. Formability of Friction Stir-Welded Blanks with Different Thickness Ratios

    NASA Astrophysics Data System (ADS)

    Kolahgar, Sina; Ghaffarpour, Morteza; Habibi, Niloufar; Kokabi, Amir Hossein; Akbarzadeh, Abbas

    2016-05-01

    Welded sheets with different thicknesses are one of the interesting types of tailor-welded blanks (TWBs) that are widely used in metal-forming industries. In the present work, the formability behavior of different 1100-aluminum TWBs was studied. In this regard, the TWBs were made with different thickness ratios by using friction stir welding (FSW) at different welding rotational speeds ( ω). The thickness ratios of 1.0, 1.3, and 1.7 were investigated where the thinner sheets had 1.5 mm thick for all conditions; i.e., the volume of welded material increased when the thickness ratio increased. Macrostructural observations, mechanical investigations, and sheet-forming limit tests were conducted. The results indicate that increasing ω leads to increasing the weld nugget size up to a maximum level and welding became impossible at higher ω. Furthermore, increasing heat input during FSW, the ultimate tensile strength of welds reduced in comparison with the initial cold-worked base metal. However, the ductility improved by increasing the heat input, which produced the sound welds. Formability studies of the friction stir-welded blanks with equal thicknesses have shown that the forming ratio improves up to 2.8 times the base metal. Forming limit curves also illustrate that increasing the thickness ratio of TWB causes the formability ratio to decrease steadily. Thus, when the thickness ratio becomes 1.7, the formability of TWB decreases approximately to the thinnest base metal.

  11. Technique for rapid at-wavelength inspection of extreme ultraviolet mask blanks

    SciTech Connect

    Spector, S. J.; White, D. L.; Tennant, D. M.; Ocola, L. E.; Novembre, A. E.; Peabody, M. L.; Wood, O. R. II

    1999-11-01

    We have developed two new methods for at-wavelength inspection of mask blanks for extreme-ultraviolet (EUV) lithography. In one method an EUV photoresist is applied directly to a mask blank which is then flood exposed with EUV light and partially developed. In the second method, the photoresist is applied to an EUV transparent membrane that is placed in close proximity to the mask and then exposed and developed. Both reflectivity defects and phase defects alter the exposure of the resist, resulting in mounds of resist at defect sites that can then be located by visual inspection. In the direct application method, a higher contrast resist was shown to increase the height of the mounds, thereby improving the sensitivity of the technique. In the membrane method, a holographic technique was used to reconstruct an image of the mask, revealing the presence of very small defects, approximately 0.2 {mu}m in size. The demonstrated clean transfer of phase and amplitude defects to resist features on a membrane will be important when flagging defects in an automatic inspection tool. (c) 1999 American Vacuum Society.

  12. Complete sternal cleft — A rare congenital malformation and its repair in a 3-month-old boy: A case report

    PubMed Central

    Kothari, Paras; Gupta, Abhaya; Patil, Prashant S.; Kekre, Geeta; Kamble, Ravi; Dikshit, Kiran Vishesh

    2016-01-01

    Complete midline sternal cleft is a rare congenital anomaly resulting from failed midline ventral fusion of the sternal bars. Very few cases of complete sternal cleft have been described in literature. We present a case of complete sternal cleft in a 3-month-old child. The patient underwent primary closure of the defect using stainless steel wires. PMID:27046980

  13. Mortality in the First 3 Months on Antiretroviral Therapy Among HIV-Positive Adults in Low- and Middle-income Countries: A Meta-analysis.

    PubMed

    Brennan, Alana T; Long, Lawrence; Useem, Johanna; Garrison, Lindsey; Fox, Matthew P

    2016-09-01

    Previous meta-analyses reported mortality estimates of 12-month post-antiretroviral therapy (ART) initiation; however, 40%-60% of deaths occur in the first 3 months on ART, a more sensitive measure of averted deaths through early ART initiation. To determine whether early mortality is dropping as treatment thresholds have increased, we reviewed studies of 3 months on ART initiation in low- to middle-income countries. Studies of 3-month mortality from January 2003 to April 2016 were searched in 5 databases. Articles were included that reported 3-month mortality from a low- to middle-income country; nontrial setting and participants were ≥15. We assessed overall mortality and stratified by year using random effects models. Among 58 included studies, although not significant, pooled estimates show a decline in mortality when comparing studies whose enrollment of patients ended before 2010 (7.0%; 95% CI: 6.0 to 8.0) with the studies during or after 2010 (4.0%; 95% CI: 3.0 to 5.0). To continue to reduce early HIV-related mortality at the population level, intensified efforts to increase demand for ART through active testing and facilitated referral should be a priority. Continued financial investments by multinational partners and the implementation of creative interventions to mitigate multidimensional complex barriers of accessing care and treatment for HIV are needed. PMID:27513571

  14. Diet and gender are important factors modulating low frequency EEG activity during processing of language sounds in 3 month old infants

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Little is known about how early postnatal diet affects brain processes related to cognitive function in healthy infants. To address this question we examined EEG activity recorded from 3 month old infants [breastfed (BF: n = 104, 55 males), milk-based formula fed (MF: n = 114, 57 males) or soy for...

  15. Acute and 3-month effects of microcrystalline hydroxyapatite, calcium citrate and calcium carbonate on serum calcium and markers of bone turnover: a randomised controlled trial in postmenopausal women.

    PubMed

    Bristow, Sarah M; Gamble, Greg D; Stewart, Angela; Horne, Lauren; House, Meaghan E; Aati, Opetaia; Mihov, Borislav; Horne, Anne M; Reid, Ian R

    2014-11-28

    Ca supplements are used for bone health; however, they have been associated with increased cardiovascular risk, which may relate to their acute effects on serum Ca concentrations. Microcrystalline hydroxyapatite (MCH) could affect serum Ca concentrations less than conventional Ca supplements, but its effects on bone turnover are unclear. In the present study, we compared the acute and 3-month effects of MCH with conventional Ca supplements on concentrations of serum Ca, phosphate, parathyroid hormone and bone turnover markers. We randomised 100 women (mean age 71 years) to 1 g/d of Ca as citrate or carbonate (citrate-carbonate), one of two MCH preparations, or a placebo. Blood was sampled for 8 h after the first dose, and after 3 months of daily supplementation. To determine whether the acute effects changed over time, eight participants assigned to the citrate dose repeated 8 h of blood sampling at 3 months. There were no differences between the citrate and carbonate groups, or between the two MCH groups, so their results were pooled. The citrate-carbonate dose increased ionised and total Ca concentrations for up to 8 h, and this was not diminished after 3 months. MCH increased ionised Ca concentrations less than the citrate-carbonate dose; however, it raised the concentrations of phosphate and the Ca-phosphate product. The citrate-carbonate and MCH doses produced comparable decreases in bone resorption (measured as serum C-telopeptide (CTX)) over 8 h and bone turnover (CTX and procollagen type-I N-terminal propeptide) at 3 months. These findings suggest that Ca preparations, in general, produce repeated sustained increases in serum Ca concentrations after ingestion of each dose and that Ca supplements with smaller effects on serum Ca concentrations may have equivalent efficacy in suppressing bone turnover.

  16. Intra-Arterial Chemotherapy as Primary Therapy for Retinoblastoma in Infants Less than 3 Months of Age: A Series of 10 Case-Studies

    PubMed Central

    Xia, Jiejun; Liu, Zhenyin; Jiang, Hua; Shen, Gang; Li, Haibo; Jiang, Yizhou; Zhang, Jing

    2016-01-01

    Purpose Retinoblastoma is the most common primary malignant intra-ocular tumor in children. Although intra-arterial chemotherapy (IAC) by selectively infusing chemotherapy through the ophthalmic artery has become an essential technique in the treatment of advanced intra-ocular retinoblastoma in children, the outcome of IAC as primary therapy for infants less than 3 months of age remains unknown. In this retrospective study, we reviewed the outcome of IAC as primary therapy for retinoblastoma in infants less than 3 months of age. Methods We retrospectively reviewed ten retinoblastoma patients attending our center from January 2009 to September 2015 and beginning primary IAC before the age of 3 months. The patient characteristics, overall outcomes and therapy-related complications were assessed. Results The mean patient age at the first IAC treatment was 10.4 weeks (range 4.9–12.9 weeks). These eyes were classified according to the International Classification of Retinoblastoma (ICRB) as group A (n = 0), B (n = 2), C (n = 0), D (n = 9), or E (n = 2). A total of 28 catheterizations were performed, and the procedure was stopped in one patient because of internal carotid artery spasm. Each eye received a mean of 2.6 cycles of IAC (range 2–4 cycles). After IAC with a mean follow-up of 28.3 months (range 9–65 months), tumor regression was observed in 12 of 13 eyes. One eye was enucleated due to tumor progression. All patients are alive and no patient has developed metastatic disease or other malignancies. Conclusions Our experience suggests IAC as primary therapy is a feasible and promising treatment for retinoblastoma in infants less than 3 months of age. PMID:27504917

  17. Genetic algorithm optimization of the forming process in case of a U-shaped part made from tailor welded blanks

    NASA Astrophysics Data System (ADS)

    Aurelian, Albut

    2013-05-01

    This paper presents an optimization method to minimize the springback phenomenon, which generate the main dimensional errors in case of sheet metal forming. The present work deals with numerical simulation related to draw bending and springback of U-shaped part made from tailor welded blanks. The base materials from tailor welded blanks have different springback behaviours, fact that must be taken in consideration in the optimisation process. The Dynaform 5.8.1 software was used to simulate the forming process, in which the blank holder is segmented in two parts in order to apply different holding force for each material. In this research the blank holder forces and the deformation speed take different numerical values. The factorial simulations test plan was made using the Design Experts 7.0 software to cover completely the variation domain. The part obtained after each simulation is analyzed and measured to quantify the errors caused by springback. Parameters as: angle between flange and sidewall, angle between sidewall and part bottom are recorded in a data base. The initial simulations plan together with the obtained results is used to understand the influence of the variable parameters on the springback behaviour of the U-shaped part made from tailor welded blanks. The gained knowledge is used to generate the objective function required by the genetic algorithm optimization method.

  18. Warm Deep Drawing of Rectangular Parts of AZ31 Magnesium Alloy Sheet Adopting Variable Blank Holder Force

    NASA Astrophysics Data System (ADS)

    Ying-hong, Peng; Qun-feng, Chang; Da-yong, Li; Xiao-qin, Zeng

    2007-05-01

    AZ31 magnesium alloy sheet with good shape and formability is fabricated by warm cross rolling. Uniaxial tensile tests are conducted using a Gleeble 3500 thermal - mechanical simulator, and the mechanical properties of AZ31 magnesium alloy sheet are analyzed. A warm deep drawing process of square part is also simulated by the finite element method. The influences of blank holder force on the formability are numerically investigated. A double-action hydraulic press that can realize adjustable blank holder forces is developed and its working principle and control system are introduced. Some warm deep drawing experiments of square parts of AZ31 magnesium alloy sheet are also performed. Different variation schemes of the blank holder force with the stroke of the punch are tested, and the experiment results are compared. Results show that the suitable blank holder force variation scheme is a ladder curve with the punch stroke. Adopting the variable blank holder force technique can improve 13.2% of the drawing depth of square parts of AZ31 magnesium alloy sheet.

  19. Recent advances in SEMATECH's mask blank development program, the remaining technical challenges, and future outlook

    NASA Astrophysics Data System (ADS)

    Goodwin, Frank; Kearney, Patrick; Kadaksham, Arun J.; Wurm, Stefan

    2013-10-01

    film for the device. In addition to the increase in complexity of the mask, introduction of EUVL requires infrastructure development of new substrate, mask blank, and finished reticle inspection tools and techniques for handling and storage of a mask without a pellicle. This paper will highlight recent advances in the ability to produce pilot line quality EUV mask blanks to meet the near-term requirements and review the existing technology gaps which must be closed to extend the current capability to meet HVM needs. A special focus will be put on substrate and mask blank defect densities; other process and infrastructure challenges will also be discussed.

  20. Feasibility study of transmission of OTV camera control information in the video vertical blanking interval

    NASA Technical Reports Server (NTRS)

    White, Preston A., III

    1994-01-01

    The Operational Television system at Kennedy Space Center operates hundreds of video cameras, many remotely controllable, in support of the operations at the center. This study was undertaken to determine if commercial NABTS (North American Basic Teletext System) teletext transmission in the vertical blanking interval of the genlock signals distributed to the cameras could be used to send remote control commands to the cameras and the associated pan and tilt platforms. Wavelength division multiplexed fiberoptic links are being installed in the OTV system to obtain RS-250 short-haul quality. It was demonstrated that the NABTS transmission could be sent over the fiberoptic cable plant without excessive video quality degradation and that video cameras could be controlled using NABTS transmissions over multimode fiberoptic paths as long as 1.2 km.

  1. A study on laser weldability and formability of high thickness ratio tailor welded blanks

    NASA Astrophysics Data System (ADS)

    Wang, Guangwei; Li, Guohua; Cai, Yan; Hua, Xueming; Wu, Yixiong

    2008-03-01

    Cold-rolled steel sheets of thickness ranging from 0.7 (with zinc coating) to 2.0 mm were used to produce tailor laser welded blanks (TLWBs) with various thickness ratios, the maximum of which reaches 2.86:1. In this study, the laser weldability and formability of the TLWBs, as well as the mechanical characteristics of the weld zones, were analyzed experimentally under the effects of various thickness ratios of TWLBs. The results showed that the hardness of the weld beads are 1.9 times higher than respective parent metal at most but the formability of TLWBs as evaluated by the Erichsen cup test was lower than that of the parent material.

  2. Experimental Investigations on Formability of Aluminum Tailor Friction Stir Welded Blanks in Deep Drawing Process

    NASA Astrophysics Data System (ADS)

    Kesharwani, R. K.; Panda, S. K.; Pal, S. K.

    2015-02-01

    In the present work, tailor friction stir welded blanks (TFSWBs) were fabricated successfully using 2.0-mm-thick AA5754-H22 and AA5052-H32 sheet metals with optimized tool design and process parameters. Taguchi L9 orthogonal array has been used to design the friction stir welding experiments, and the Grey relational analysis has been applied for the multi objective optimization in order to maximize the weld strength and total elongation reducing the surface roughness and energy consumption. The formability of the TFSWBs and parent materials was evaluated and compared in terms of limiting drawing ratio (LDR) using a conventional circular die. It was found that the formability of the TFSWBs was comparable with that of both the parent materials without failure in the weldment. A modified conical tractrix die (MCTD) was proposed to enhance the LDR of the TFSWBs. It was found that the formability was improved by 27% using the MCTD.

  3. [Suicidal shot in the mouth with an unmodified blank cartridge pistol].

    PubMed

    Bungardt, Nikola; Dettmeyer, Reinhard; Madea, Burkhard

    2005-01-01

    In the medicolegal literature reports of suicides with weapons designed for self-defence, especially gas pistols, are rare. We report on a suicide of a 54-year-old woman who fired a fatal shot in her mouth with an unmanipulated blank cartridge pistol, make Röhm RG 8, calibre 8 mm. The autopsy findings (lips and mucosa of the buccal vestibule without injuries, but extensive lesions of the tongue and the middle and rear third of the smooth palate) suggest that the shot was fired - as observed by a witness - with the barrel of the weapon inside the oral cavity. Both macroscopic inspection and histological investigations excluded the possibility that death was caused by an injury of the brain, in particular the brain stem. The immediate cause of death was deep aspiration of chyme with concurrent aspiration of blood.

  4. Repair of localized defects in multilayer-coated reticle blanks for extreme ultraviolet lithography

    DOEpatents

    Stearns, Daniel G.; Sweeney, Donald W.; Mirkarimi, Paul B.

    2004-11-23

    A method is provided for repairing defects in a multilayer coating layered onto a reticle blank used in an extreme ultraviolet lithography (EUVL) system. Using high lateral spatial resolution, energy is deposited in the multilayer coating in the vicinity of the defect. This can be accomplished using a focused electron beam, focused ion beam or a focused electromagnetic radiation. The absorbed energy will cause a structural modification of the film, producing a localized change in the film thickness. The change in film thickness can be controlled with sub-nanometer accuracy by adjusting the energy dose. The lateral spatial resolution of the thickness modification is controlled by the localization of the energy deposition. The film thickness is adjusted locally to correct the perturbation of the reflected field. For example, when the structural modification is a localized film contraction, the repair of a defect consists of flattening a mound or spreading out the sides of a depression.

  5. A study of defects on EUV mask using blank inspection, patterned mask inspection, and wafer inspection

    SciTech Connect

    Huh, S.; Ren, L.; Chan, D.; Wurm, S.; Goldberg, K. A.; Mochi, I.; Nakajima, T.; Kishimoto, M.; Ahn, B.; Kang, I.; Park, J.-O.; Cho, K.; Han, S.-I.; Laursen, T.

    2010-03-12

    The availability of defect-free masks remains one of the key challenges for inserting extreme ultraviolet lithography (EUVL) into high volume manufacturing. yet link data is available for understanding native defects on real masks. In this paper, a full-field EUV mask is fabricated to investigate the printability of various defects on the mask. The printability of defects and identification of their source from mask fabrication to handling were studied using wafer inspection. The printable blank defect density excluding particles and patterns is 0.63 cm{sup 2}. Mask inspection is shown to have better sensitivity than wafer inspection. The sensitivity of wafer inspection must be improved using through-focus analysis and a different wafer stack.

  6. Effect of Gaboxadol on Patient-reported Measures of Sleep and Waking Function in Patients with Primary Insomnia: Results from Two Randomized, Controlled, 3-month Studies

    PubMed Central

    Roth, Thomas; Lines, Christopher; Vandormael, Kristel; Ceesay, Paulette; Anderson, Donald; Snavely, Duane

    2010-01-01

    Objective: To evaluate the efficacy and safety of gaboxadol in the treatment of Primary Insomnia. Methods: Two studies were performed in patients 18 to 65 years of age with Primary Insomnia. After a 7-day single-blind placebo run-in, patients were randomized to double-blind treatment with gaboxadol 15 mg (N = 310), 10 mg (N = 308), or placebo (N = 309) over 3 months in Study 1; and gaboxadol 15 mg (N = 304) or placebo (N = 301) over 12 months in Study 2. Treatment was administered at bedtime. The primary efficacy endpoints in each study were change from baseline in patient-reported total sleep time (sTST) and time to sleep onset (sTSO) at month 3. Safety was assessed primarily by adverse event reports. Results: In Study 1, gaboxadol 15 mg significantly improved sTST (difference vs. placebo of 20.4 min, p < 0.01) and sTSO (difference vs. placebo of −9.8 min, p < 0.05) at 3 months, while gaboxadol 10 mg had no significant effects on these measures. In Study 2, gaboxadol 15 mg showed numerical superiority for improvements on sTST (difference vs. placebo of 14.5 min) and sTSO (difference vs. placebo of −4.9 min) at 3 months, but these differences were not significant. In both studies, there was evidence that the efficacy of gaboxadol was more pronounced in women than men. Gaboxadol was generally well tolerated over 3 months in Study 1, and over 12 months in Study 2. Conclusion: Gaboxadol 15 mg showed variable efficacy on measures of sleep duration and onset at 3 months in adult patients with Primary Insomnia in these studies and appeared to be more effective in women than men. Gaboxadol 10 mg was not effective in these studies. (Clinical trial registration numbers: NCT00103818, NCT00095069) Citation: Roth T; Lines C; Vandormael K; Ceesay P; Anderson D; Snavely D. Effect of gaboxadol on patient-reported measures of sleep and waking function in patients with Primary Insomnia: results from two randomized, controlled, 3-month studies. J Clin Sleep Med 2010

  7. Statistical investigation of a blank holder force distribution system for a multi-step deep drawing process

    NASA Astrophysics Data System (ADS)

    Tommerup, So/ren; Endelt, Benny; Nielsen, Karl Brian

    2013-12-01

    This paper investigates process control possibilities obtained from a new tool concept for adaptive blank holder force (BHF) distribution. The investigation concerns the concept's application to a multi-step deep drawing process exemplified by the NUMISHEET2014 benchmark 2: Springback of draw-redraw pan. An actuator system, where several cavities are embedded into the blank holder plate is used. By independently controlling the pressure of hydraulic fluid in these cavities, a controlled deflection of the blank holder plate surface can be achieved whereby the distribution of the BHF can be controlled. Using design of experiments, a full 3-level factorial experiments is conducted with respect to the cavity pressures, and the effects and interactions are evaluated.

  8. Manufacture of Φ1.2m reaction bonded silicon carbide mirror blank CFID

    NASA Astrophysics Data System (ADS)

    Zhang, Ge; Zhao, Rucheng; Zhao, Wenxing; Bao, Jianxun

    2010-05-01

    Silicon carbide (SiC) is a new type candidate material for large-scale lightweight space mirror. Its low thermal distortion, high stiffness, fine optical quality and dimensional stability, make SiC an ideal material for large space born telescope. Since ten years Changchun institute optics, fine mechanics and physics (CIOMP) has developed reaction bonded SiC (RB-SiC) technology for space application, and can fabricate RB-SiC mirror with scale less than 1.0 meter for telescope. The green body is prepared with gel-casting method which is an attractive new ceramic forming process for making high-quality, complex-shaped ceramic parts. And then unmolding, drying, binder burning out, reacting bonded, the RB-SiC can be obtained. But with the development of space-born or ground telescope, the scale of primary mirror has exceeded 1.0 meter. So CIOMP has developed an assembly technique which called novel reaction-formed joint technology for larger RB-SiC mirror blank. The steps include joining of green bodies with mixture comprised of SiC particles and phenolic resin etc, firing, machining and sintering. Joining the Φ1.2 meter RB-SiC mirror blank by the novel reaction-formed joint technology. And testing the welding layer's performance, the results show that the thickness of 54-77μm, the microstructure and thermal property can be comparable to the substrate and the mechanical property are excellent in bending strength of 307MPa.

  9. Production of the 4.26 m ZERODUR mirror blank for the Advanced Technology Solar telescope (ATST)

    NASA Astrophysics Data System (ADS)

    Jedamzik, Ralf; Werner, Thomas; Westerhoff, Thomas

    2014-07-01

    The Daniel K. Inouye Solar Telescope (DKIST, formerly the Advanced Technology Solar Telescope, ATST) will be the most powerful solar telescope in the world. It is currently being built by the Association of Universities for Research in Astronomy (AURA) in a height of 3000 m above sea level on the mountain Haleakala of Maui, Hawaii. The primary mirror blank of diameter 4.26 m is made of the extremely low thermal expansion glass ceramic ZERODUR® of SCHOTT AG Advanced Optics. The DKIST primary mirror design is extremely challenging. With a mirror thickness of only 78 to 85 mm it is the smallest thickness ever machined on a mirror of 4.26 m in diameter. Additionally the glassy ZERODUR® casting is one of the largest in size ever produced for a 4 m class ZERODUR® mirror blank. The off axis aspherical mirror surface required sophisticated grinding procedures to achieve the specified geometrical tolerance. The small thickness of about 80 mm required special measures during processing, lifting and transport. Additionally acid etch treatment was applied to the convex back-surface and the conical shaped outer diameter surface to improve the strength of the blank. This paper reports on the challenging tasks and the achievements on the material property and dimensional specification parameter during the production of the 4.26 m ZERODUR® primary mirror blank for AURA.

  10. 76 FR 14697 - Aleris Blanking and Rim Products, Inc., a Division of Aleris International, Inc., Terre Haute, IN...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-17

    ... the Federal Register on March 2, 2010 (75 FR 9436-9437). The workers produce aluminum blanks and hoops... International, Inc., Terre Haute, IN; Notice of Revised Determination on Reconsideration On February 18, 2010, the Department issued an Affirmative Determination Regarding Application for Reconsideration for...

  11. 75 FR 9436 - Aleris Blanking and Rim Products, Inc., a Division of Aleris International, Inc., Terre Haute, IN...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-02

    ... (75 FR 3932). The initial investigation resulted in a negative determination based on the findings... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF LABOR Employment and Training Administration Aleris Blanking and Rim Products, Inc., a Division of...

  12. Summary and evaluation of pesticides in field blanks collected for the National Water-Quality Assessment Program, 1992-95

    USGS Publications Warehouse

    Martin, Jeffrey D.; Gilliom, Robert J.; Schertz, Terry L.

    1999-01-01

    Field blanks did show evidence of contamination by some pesticides. Most of the pesticides detected in field blanks, however, were detected more frequently and at higher concentrations in environmental water samples. Two criteria were used to evaluate the need to consider contamination in water-quality assessments: (1) a ratio of the frequency of pesticide detection in environmental water samples to the frequency of detection in field blanks of 5.0 or less and (2) a ratio of the median concentration detected in environmental water samples to the maximum concentration detected in field blanks of 2.0 or less. These criteria indicate that contamination, for the majority of the pesticide data collected for the NAWQA Program, probably does not need to be considered in the analysis and interpretation of (1) the frequency of pesticide detection or (2) the median concentration of pesticides detected. Contamination must be considered, however, in detection frequency for cispermethrin, pronamide, p,p' -DDE, pebulate, propargite, ethalfluralin, and triallate in surface water and fenuron, benfluralin, pronamide, cis-permethrin, triallate, chlorpyrifos, trifluralin, propanil, p,p' -DDE, bromacil, dacthal, diazinon, and diuron in ground water. Contamination also must be considered in median concentrations detected for pronamide, p,p' -DDE, propargite, napropamide, and triallate in surface water and benfluralin, cis-permethrin, triallate, chlorpyrifos, trifluralin, p,p' -DDE, dacthal, and diazinon in ground water.

  13. Effect of complications within 90 days on patient-reported outcomes 3 months and 12 months following elective surgery for lumbar degenerative disease.

    PubMed

    Chotai, Silky; Parker, Scott L; Sivaganesan, Ahilan; Sielatycki, J Alex; Asher, Anthony L; McGirt, Matthew J; Devin, Clinton J

    2015-12-01

    OBJECT There is a paradigm shift toward rewarding providers for quality rather than volume. Complications appear to occur at a fairly consistent frequency in large aggregate data sets. Understanding how complications affect long-term patient-reported outcomes (PROs) following degenerative lumbar surgery is vital. The authors hypothesized that 90-day complications would adversely affect long-term PROs. METHODS Nine hundred six consecutive patients undergoing elective surgery for degenerative lumbar disease over a period of 4 years were enrolled into a prospective longitudinal registry. The following PROs were recorded at baseline and 12-month follow-up: Oswestry Disability Index (ODI) score, numeric rating scales for back and leg pain, quality of life (EQ-5D scores), general physical and mental health (SF-12 Physical Component Summary [PCS] and Mental Component Summary [MCS] scores) and responses to the North American Spine Society (NASS) satisfaction questionnaire. Previously published minimum clinically important difference (MCID) threshold were used to define meaningful improvement. Complications were divided into major (surgicalsite infection, hardware failure, new neurological deficit, pulmonary embolism, hematoma and myocardial infarction) and minor (urinary tract infection, pneumonia, and deep venous thrombosis). RESULTS Complications developed within 90 days of surgery in 13% (118) of the patients (major in 12% [108] and minor in 8% [68]). The mean improvement in ODI scores, EQ-5D scores, SF-12 PCS scores, and satisfaction at 3 months after surgery was significantly less in the patients with complications than in those who did not have major complications (ODI: 13.5 ± 21.2 vs 21.7 ± 19, < 0.0001; EQ-5D: 0.17 ± 0.25 vs 0.23 ± 0.23, p = 0.04; SF-12 PCS: 8.6 ± 13.3 vs 13.0 ± 11.9, 0.001; and satisfaction: 76% vs 90%, p = 0.002). At 12 months after surgery, the patients with major complications had higher ODI scores than those without complications (29.1

  14. Effect of complications within 90 days on patient-reported outcomes 3 months and 12 months following elective surgery for lumbar degenerative disease.

    PubMed

    Chotai, Silky; Parker, Scott L; Sivaganesan, Ahilan; Sielatycki, J Alex; Asher, Anthony L; McGirt, Matthew J; Devin, Clinton J

    2015-12-01

    OBJECT There is a paradigm shift toward rewarding providers for quality rather than volume. Complications appear to occur at a fairly consistent frequency in large aggregate data sets. Understanding how complications affect long-term patient-reported outcomes (PROs) following degenerative lumbar surgery is vital. The authors hypothesized that 90-day complications would adversely affect long-term PROs. METHODS Nine hundred six consecutive patients undergoing elective surgery for degenerative lumbar disease over a period of 4 years were enrolled into a prospective longitudinal registry. The following PROs were recorded at baseline and 12-month follow-up: Oswestry Disability Index (ODI) score, numeric rating scales for back and leg pain, quality of life (EQ-5D scores), general physical and mental health (SF-12 Physical Component Summary [PCS] and Mental Component Summary [MCS] scores) and responses to the North American Spine Society (NASS) satisfaction questionnaire. Previously published minimum clinically important difference (MCID) threshold were used to define meaningful improvement. Complications were divided into major (surgicalsite infection, hardware failure, new neurological deficit, pulmonary embolism, hematoma and myocardial infarction) and minor (urinary tract infection, pneumonia, and deep venous thrombosis). RESULTS Complications developed within 90 days of surgery in 13% (118) of the patients (major in 12% [108] and minor in 8% [68]). The mean improvement in ODI scores, EQ-5D scores, SF-12 PCS scores, and satisfaction at 3 months after surgery was significantly less in the patients with complications than in those who did not have major complications (ODI: 13.5 ± 21.2 vs 21.7 ± 19, < 0.0001; EQ-5D: 0.17 ± 0.25 vs 0.23 ± 0.23, p = 0.04; SF-12 PCS: 8.6 ± 13.3 vs 13.0 ± 11.9, 0.001; and satisfaction: 76% vs 90%, p = 0.002). At 12 months after surgery, the patients with major complications had higher ODI scores than those without complications (29.1

  15. Phase defect analysis with actinic full-field EUVL mask blank inspection

    NASA Astrophysics Data System (ADS)

    Yamane, Takeshi; Tanaka, Toshihiko; Terasawa, Tsuneo; Suga, Osamu

    2011-11-01

    We had developed an actinic full-field inspection system to detect multilayer phase-defects with dark field imaging. Regarding the actinic inspection of native defects, the influence of the defect's surface dimension and multilayer structure, on the intensity-signal obtained from the inspection was analyzed. Three mask blanks were inspected from which 55 defects, observed with AFM and SEM, were classified as amplitude-defects or phase-defects. The surface dimensions and SEVDs (sphere equivalent volume diameters) of the defects were measured with the AFM. In the case where their SEVDs were same as of the programmed phase-defects, they were found to produce stronger intensitysignals in comparison to the ones from the programmed phase-defects. Cross-sectional multilayer structures of two native phase-defects were observed with TEM, and those defects formed non-conformal structures in the multilayer. This result means that most of the native phase-defects tend to form a non-conformal structure, and can make large impact on the wafer image in comparison to the ones from a conformal structure. Besides phase-defects, the actinic inspection also detected amplitude-defects. Although the sensitivities of the amplitude-defects were found to be lower than those of the phase-defects, an amplitude-defect higher than 30 nm could be detected with high probability.

  16. Impact of EUVL mask surface roughness on an actinic blank inspection image and a wafer image

    NASA Astrophysics Data System (ADS)

    Yamane, Takeshi; Terasawa, Tsuneo

    2012-11-01

    An impact of EUVL mask surface roughness on actinic inspection was studied. The background level (BGL) of an actinic inspection image is caused by the light scattered from the mask blank surface roughness. The BGL is found to be proportional to the square of the mask surface roughness measured by AFM. By using this proportionality coefficient, a global distribution of the surface roughness can be obtained at the same time while inspection a mask. On the other hand, any local variation of BGL indicates variation of the mask surface roughness at each pixel. Assuming that the roughness at a center pixel is 0.15 nm rms (SEMI standard specification) and those at the surrounding pixels are 0.1 nm rms, the signal intensity at the center pixel is found to be approximately the same as that of a 1.2 nm-high and 40 nm-wide programmed defect. In that case, CD error on a wafer image due to the reflectivity loss by the roughness is found to be not critical. This means that the local roughness should be less than 0.15 nm rms, and that the inspection system can detect such a local variation of the roughness with 100 % probability.

  17. Temperature Distribution in Teeth and Blanks of Ultra-High-Speed Gears

    NASA Astrophysics Data System (ADS)

    Tozaki, Yasuyoshi; Matsumoto, Susumu; Fukutomi, Masatoshi

    Currently in industries, high-speed turbo machineries such as compressors and steam or gas turbines are required to have increased power capacities. Due to this, a large gear size is required which leads to nonuniform temperature distribution. As the result of nonuniform temperature distribution, nonuniform thermal distortion occurs. Change in load distribution due to this thermal distortion is considered to be closely related to scoring and pitting failures. In order to ensure reliability of high-speed gear units, it is necessary to improve the following techniques. (1) The method of predicting the temperature rise of gears and thermal distortion. (2) Tooth correction against thermal distortion. In this paper, a three-dimensional model for calculating the temperature of teeth surfaces and blanks is presented. This model includes the effects of convective cooling by lubricating oil and the change in load distribution due to mechanical deformation. The calculated results of gear teeth temperature and bending stress are in reasonable agreement with the experimental results. It is confirmed that the analytical method is practical and useful.

  18. Low-blank isotope ratio measurement of small samples of lithium using multiple-collector ICPMS

    NASA Astrophysics Data System (ADS)

    Magna, Tomás; Wiechert, Uwe H.; Halliday, Alex N.

    2004-12-01

    A new method is presented for separation of lithium from silicate rocks and high precision MC-ICPMS analysis. A relatively small (3.57 meq) resin volume is able to separate lithium from all silicate rocks in a single step using only 16 ml of nitric acid mixed with methanol. Some advantages of the method are high sample throughput, low blanks and elution parameters that are insensitive to lithology. Elution schemes are presented for a range of igneous rocks and minerals. [delta]7Li values for standards from the U.S. Geological Survey (USGS) for BCR-1, BHVO-2 and AGV-2 are 2.4[per mille sign], 4.6[per mille sign] and 7.9[per mille sign], respectively. Reference materials from the Geological Survey of Japan (GSJ) JB-2 and JR-2 give [delta]7Li values of 4.7[per mille sign] and 3.8[per mille sign], respectively. The data for most reference rocks reproduce to within better than 0.5[per mille sign]. This column method can also be used for the direct separation of high-field-strength elements (Ti, Zr, Hf, Nb, Ta) from silicate rocks.

  19. Spatial biases during mental arithmetic: evidence from eye movements on a blank screen

    PubMed Central

    Hartmann, Matthias; Mast, Fred W.; Fischer, Martin H.

    2014-01-01

    While the influence of spatial-numerical associations in number categorization tasks has been well established, their role in mental arithmetic is less clear. It has been hypothesized that mental addition leads to rightward and upward shifts of spatial attention (along the “mental number line”), whereas subtraction leads to leftward and downward shifts. We addressed this hypothesis by analyzing spontaneous eye movements during mental arithmetic. Participants solved verbally presented arithmetic problems (e.g., 2 + 7, 8–3) aloud while looking at a blank screen. We found that eye movements reflected spatial biases in the ongoing mental operation: Gaze position shifted more upward when participants solved addition compared to subtraction problems, and the horizontal gaze position was partly determined by the magnitude of the operands. Interestingly, the difference between addition and subtraction trials was driven by the operator (plus vs. minus) but was not influenced by the computational process. Thus, our results do not support the idea of a mental movement toward the solution during arithmetic but indicate a semantic association between operation and space. PMID:25657635

  20. Microstructure-Texture-Mechanical Properties in Hot Rolling of a Centrifugal Casting Ring Blank

    NASA Astrophysics Data System (ADS)

    Qin, Fang-cheng; Li, Yong-tang; Qi, Hui-ping; Ju, Li

    2016-03-01

    Deformation characteristic of centrifugal casting 25Mn steel was investigated by compression tests, and then processing maps were established. According to the deformation parameters identified from the established processing maps and hot ring rolling (HRR) process, the industrial test for the 25Mn ring blank was performed. Optical microscope (OM) and electron backscatter diffraction (EBSD) techniques were used for detecting grain boundary features and textures of deformation structures. The morphologies and mechanisms of tensile and impact fracture were revealed. The results show that softening effect plays a dominant role in higher temperatures of 1050-1150 °C and strain rates lower than 0.1 s-1. The average grain size of the rolled 25Mn ring is about 28 μm, but the grains are more coarse and inhomogeneous on the middle layer than that on rest of the areas. The texture on the outer layer is characterized by strong {110} <112> and weak {112} <111>, followed by {001} <100> and {001} <110> on the inner layer and {110} <110> on the center layer, which is mainly associated with the shear deformation. The rolled ring with precise geometrical dimensions and sound mechanical properties is fabricated by HRR. Tensile fracture is composed of clear river-shaped pattern and a little dimple near the inner layer and outer layer, and the fracture mechanism is mainly quasi-cleavage fracture, accompanied by dimple fracture. The morphologies of impact fracture consist of tear ridge and cleavage platform.

  1. Velocity Interferometer blanking due to preheating in a double pulse planar experiment

    NASA Astrophysics Data System (ADS)

    Laffite, S.; Baton, S. D.; Combis, P.; Clerouin, J.; Koenig, M.; Recoules, V.; Rousseaux, C.; Videau, L.

    2014-08-01

    Optical diagnostics, such as VISAR (Velocity Interferometer System for Any Reflector) or SOP (Streaked Optical Pyrometry), have become essential in shock timing experiments. Their high precision allows for accurate measurements of shock velocities, chronometry, and brightness temperature. However, in some instances, these measurements can be compromised. In planar shock coalescence experiments recently performed at the LULI facility [Baton et al., Phys. Rev. Lett. 108, 195002 (2012)], VISAR signal loss was observed. In these experiments, a strong shock launched by a high-intensity spike catches up with a previously shock launched by an earlier, low-intensity beam. The disappearance of the VISAR signal is attributed to a preheating of the coronal plasma by x-rays generated by the high intensity spike. The signal does not disappear if the high-intensity spike starts after VISAR probe beam begins to reflect off of the first shock. The VISAR diagnostic, modeled using an assessment of the optical index in quartz, compares favorably to experimental results. This provides evidence that x-ray preheating can cause blanking of the VISAR signal in quartz.

  2. Velocity Interferometer blanking due to preheating in a double pulse planar experiment

    SciTech Connect

    Laffite, S.; Combis, P.; Clerouin, J.; Recoules, V.; Rousseaux, C.; Videau, L.; Baton, S. D.; Koenig, M.

    2014-08-15

    Optical diagnostics, such as VISAR (Velocity Interferometer System for Any Reflector) or SOP (Streaked Optical Pyrometry), have become essential in shock timing experiments. Their high precision allows for accurate measurements of shock velocities, chronometry, and brightness temperature. However, in some instances, these measurements can be compromised. In planar shock coalescence experiments recently performed at the LULI facility [Baton et al., Phys. Rev. Lett. 108, 195002 (2012)], VISAR signal loss was observed. In these experiments, a strong shock launched by a high-intensity spike catches up with a previously shock launched by an earlier, low-intensity beam. The disappearance of the VISAR signal is attributed to a preheating of the coronal plasma by x-rays generated by the high intensity spike. The signal does not disappear if the high-intensity spike starts after VISAR probe beam begins to reflect off of the first shock. The VISAR diagnostic, modeled using an assessment of the optical index in quartz, compares favorably to experimental results. This provides evidence that x-ray preheating can cause blanking of the VISAR signal in quartz.

  3. A model to predict 3-month mortality risk of acute-on-chronic hepatitis B liver failure using artificial neural network.

    PubMed

    Zheng, M-H; Shi, K-Q; Lin, X-F; Xiao, D-D; Chen, L-L; Liu, W-Y; Fan, Y-C; Chen, Y-P

    2013-04-01

    Model for end-stage liver disease (MELD) scoring was initiated using traditional statistical technique by assuming a linear relationship between clinical features, but most phenomena in a clinical situation are not linearly related. The aim of this study was to predict 3-month mortality risk of acute-on-chronic hepatitis B liver failure (ACHBLF) on an individual patient level using an artificial neural network (ANN) system. The ANN model was built using data from 402 consecutive patients with ACHBLF. It was trained to predict 3-month mortality by the data of 280 patients and validated by the remaining 122 patients. The area under the curve of receiver operating characteristic (AUROC) was calculated for ANN and MELD-based scoring systems. The following variables age (P < 0.001), prothrombin activity (P < 0.001), serum sodium (P < 0.001), total bilirubin (P = 0.015), hepatitis B e antigen positivity rate (P < 0.001) and haemoglobin (P < 0.001) were significantly related to the prognosis of ACHBLF and were selected to build the ANN. The ANN performed significantly better than MELD-based scoring systems both in the training cohort (AUROC = 0.869 vs 0.667, 0.591, 0.643, 0.571 and 0.577; P < 0.001, respectively) and in the validation cohort (AUROC = 0.765 vs 0.599, 0.563, 0.601, 0.521 and 0.540; P ≤ 0.006, respectively). Thus, the ANN model was shown to be more accurate in predicting 3-month mortality of ACHBLF than MELD-based scoring systems. PMID:23490369

  4. Minimum Acceptable Diet at 9 Months but Not Exclusive Breastfeeding at 3 Months or Timely Complementary Feeding Initiation Is Predictive of Infant Growth in Rural Bangladesh

    PubMed Central

    Owais, Aatekah; Schwartz, Benjamin; Kleinbaum, David G.; Suchdev, Parminder S.; Faruque, A. S. G.; Das, Sumon K.; Stein, Aryeh D.

    2016-01-01

    The association between suboptimal infant feeding practices and growth faltering is well-established. However, most of this evidence comes from cross-sectional studies. To prospectively assess the association between suboptimal infant feeding practices and growth faltering, we interviewed pregnant women at 28–32 weeks’ gestation and followed-up their offspring at postnatal months 3, 9, 16 and 24 months in rural Bangladesh. Using maternal recall over the past 24 hours, exclusive breastfeeding (EBF) status at 3 months, age at complementary feeding (CF) initiation, and receipt of minimum acceptable diet (MAD; as defined by WHO) at 9 months were assessed. Infant length and weight measurements were used to produce length-for-age (LAZ) and weight-for-length (WLZ) z-scores at each follow-up. Generalized estimating equations were used to estimate associations of LAZ and WLZ with infant feeding practices. All models were adjusted for baseline SES, infant sex, maternal height, age, literacy and parity. Follow-up was completed by 2189, 2074, 1969 and 1885 mother-child dyads at 3, 9, 16 and 24 months, respectively. Stunting prevalence increased from 28% to 57% between infant age 3 and 24 months. EBF at 3 months and age at CF initiation were not associated with linear infant growth, but receipt of MAD at 9 months was. By age 24 months, infants receiving MAD had attained a higher LAZ compared to infants who did not receive MAD (adjusted β = 0.25, 95% CI: 0.13–0.37). Although prevalence of stunting was already high at age 3 months, ensuring infants receive a diverse, high quality diet from 6 months onwards may reduce rates of stunting in the second year of life. PMID:27776161

  5. The effect of a 3-month moderate-intensity physical activity program on body composition in overweight and obese African American college females

    PubMed Central

    Casazza, K.; Durant, N. H.

    2014-01-01

    Summary This study evaluated body composition outcomes following a 3-month exercise program for overweight/obese Black women. BMI decreased over the 3-month study despite an observed increase in body fat. Enhancements in bone marrow density and muscle density were also observed. Results show promising yet hypothesis-generating findings to explore in future research. Introduction Few studies have evaluated the relationship between aerobic physical activity (PA) and body composition among young adult overweight/obese African American (AA) women. Purpose The current study evaluated the effect of a 3-month moderate-intensity aerobic physical activity intervention for overweight and obese young adult women on bone, lean, and fat mass. Methods Participants (n=15) were a randomly selected subset of AA female college students (M age=21.7 years; M BMI= 33.3) enrolled in a larger PA promotion pilot study (n=31). Study protocol required participants to engage in four 30–60-min moderate-intensity aerobic PA sessions each week. Whole body composition was measured by dual-energy X-ray absorptiometry (DXA), and peripheral quantitative computed tomography (pQCT) was used to assess additional quantitative and qualitative assessment of the radius. Results BMI decreased over the duration of the study (P=.034), reflected by a marginal decrease in body weight (P=.057). However, unexpectedly, increases in adipose tissue measures were observed, including total body fat (P=.041), percent body fat (P=.044), trunk fat (P=.031), and percent trunk fat (P=.041). No changes in DXA-measured bone outcomes were observed (i.e., bone mineral density, P=.069; bone mineral content, P=.211). Results from the pQCT assessment showed that bone marrow density increased (P=.011), but cortical density remained stable (P=.211). A marginally significant increase in muscle density (P=.053) and no changes in muscle area (P=.776) were observed. Conclusions A 3-month moderate-intensity PA program was associated

  6. Distortion product otoacoustic emission (2f1-f2) suppression in 3-month-old infants: Evidence for postnatal maturation of human cochlear function?

    NASA Astrophysics Data System (ADS)

    Abdala, Carolina

    2004-12-01

    The complete timeline for maturation of human cochlear function has not been defined. Distortion product otoacoustic emission (DPOAE)-based measures of cochlear function show non-adult-like responses from premature and term-born neonates at high f2 frequencies; however, older infants were not included in these studies. In the present experiment, previously collected DPOAE ipsilateral suppression data from premature neonates were combined with new data collected from adults, term-born neonates, and 3-month-old infants to further examine the time course for maturation of cochlear function. DPOAE suppression tuning curves (STC) and suppression growth patterns were measured in the three age groups at f2=6000 Hz, L1=65, L2=55 dB SPL, with an f2/f1 of 1.2. Results indicate that term-born neonates and 3-month-old infants have non-adult-like STC width, slope on the low-frequency flank, and tip features. However, the two infant groups are not significantly different from one another. Suppression growth patterns for low-frequency suppressor tones show a clear developmental progression. In general, the younger the infant, the more shallow and compressive the suppression growth for the lowest suppressor frequencies. These findings suggest a high-frequency postnatal immaturity in cochlear function as measured by DPOAE suppression. Results may have been influenced by noncochlear factors, such as middle-ear immaturity. These factors are reviewed and considered. .

  7. Severe weight loss in 3 months after allogeneic hematopoietic SCT was associated with an increased risk of subsequent non-relapse mortality.

    PubMed

    Fuji, S; Mori, T; Khattry, N; Cheng, J; Do, Y R; Yakushijin, K; Kohashi, S; Fukuda, T; Kim, S-W

    2015-01-01

    Patients after allogeneic hematopoietic SCT (HSCT) are at risk of malnutrition. To assess the impact of malnutrition after allogeneic HSCT on transplant outcomes, we conducted a retrospective study. Adult patients who received allogeneic HSCT from 2000 to 2009 for standard-risk leukemia and achieved disease-free survival up to 3 months after allogeneic HSCT were included. From participating centers, 145 patients were enrolled. Median age was 46 years (19-68). Patients were classified based on weight loss during 3 months after allogeneic HSCT as follows: normal group (weight loss <5%, n=53), mild malnutrition group (5%⩽weight loss<10%, n=47), severe malnutrition group (10% ⩽weight loss, n=45). The cumulative incidences of 2-year nonrelapse mortality (NRM) were 3.8% in the normal group, 8.5% in the mild malnutrition group and 27.3% in the severe malnutrition group. The probabilities of a 2-year OS were 73.2% in the normal group, 74.5% in the mild malnutrition group and 55.3% in the severe malnutrition group. In multivariate analysis, severe malnutrition was associated with an increased risk of NRM and a worse OS. In conclusion, weight loss ⩾10% was associated with a worse clinical outcome. Prospective studies that identify patients at risk of malnutrition and intervention by a nutritional support team are warranted. PMID:25285803

  8. The impact of prenatal serotonin reuptake inhibitor (SRI) antidepressant exposure and maternal mood on mother-infant interactions at 3 months of age.

    PubMed

    Weikum, Whitney M; Mayes, Linda C; Grunau, Ruth E; Brain, Ursula; Oberlander, Tim F

    2013-12-01

    Exposure to maternal depression increases risks for altered mother-infant interactions. Serotonin reuptake inhibitor (SRI) antidepressants are increasingly prescribed to manage antenatal maternal illness. The impact of SRIs on early mother-infant interactions was unknown. Three-month-old infants of 32 depressed mothers treated with SRI medications during pregnancy and 43 non-medicated mothers were studied. Using an established face-to-face mother-infant interaction paradigm, dyad interactions were studied with and without a toy. Videotaped sessions yielded 4 measures: maternal sensitivity, dyadic organization, infant readiness to interact, and maternal interruptive behaviors. Even with prenatal SRI treatment, depressed mothers interrupted their infants more during toy play. In the absence of prenatal SRI treatment, maternal postnatal depression adversely influenced infant behavior. Higher levels of maternal depression symptoms at 3 months predicted poorer infant readiness to interact during the toy session. Conversely, in the SRI-exposed group, higher prenatal depression scores predicted greater infant readiness to interact at 3 months. Increased infant readiness with SRI exposure suggests a "fetal programming effect" whereby prenatal maternal mood disturbances shaped a future response to a postnatal depressed maternal environment. PMID:23728194

  9. Periodontal health status in patients treated with the Invisalign® system and fixed orthodontic appliances: A 3 months clinical and microbiological evaluation

    PubMed Central

    Levrini, Luca; Mangano, Alessandro; Montanari, Paola; Margherini, Silvia; Caprioglio, Alberto; Abbate, Gian Marco

    2015-01-01

    Objective: The aim of this prospective study was to compare the periodontal health and the microbiological changes via real-time polymerase chain reaction (PCR) in patients treated with fixed orthodontic appliances and Invisalign® system (Align Technology, Santa Clara, California). Materials and Methods: Seventy-seven patients were enrolled in this study and divided into three groups (Invisalign® group, fixed orthodontic appliances group and control group). Plaque index, probing depth, bleeding on probing were assessed. Total biofilm mass and periodontal pathogens were analyzed and detected via real-time PCR. All these data were analyzed at the T0 (beginning of the treatment) T1 (1-month) and T2 (3 months); and statistically compared using the Mann–Whitney test for independent groups. Results: After 1-month and after 3 months of treatment there was only one sample with periodontopathic anaerobes found in patient treated using fixed orthodontic appliances. The Invisalign® group showed better results in terms of periodontal health and total biofilm mass compared to the fixed orthodontic appliance group. A statistical significant difference (P < 0.05) at the T2 in the total biofilm mass was found between the two groups. Conclusion: Patients undergoing orthodontic treatment with the Invisalign® System show a superior periodontal health in the short-term when compared to patients in treatment with fixed orthodontic appliances. Invisalign® should be considered as a first treatment option in patients with risk of developing periodontal disease. PMID:26430371

  10. Technology and experiments of 42CrMo bearing ring forming based on casting ring blank

    NASA Astrophysics Data System (ADS)

    Li, Yongtang; Ju, Li; Qi, Huiping; Zhang, Feng; Chen, Guozhen; Wang, Mingli

    2014-03-01

    Bearing ring is the crucial component of bearing. With regard to such problems as material waste, low efficiency and high energy consumption in current process of producing large bearing ring, a new process named "casting-rolling compound forming technology" is researched by taking the typical 42CrMo slew bearing as object. Through theoretical analysis, the design criteria of the main casting-rolling forming parameters are put forward at first. Then the constitutive relationship model of as-cast 42CrMo steel and its mathematical model of dynamic recrystallization are obtained according to the results of the hot compression experiment. By a coupled thermal-mechanical finite element model for radial-axial rolling of bearing ring, the fraction of dynamic recrystallization is calculated and recrystallized grains size are predicated. Meanwhile, the effects of the initial rolling temperature and feed rate of idle roll on material microstructure evolution are analyzed. Finally, the industrial rolling experiment is designed and performed, based on the simulation results. In addition, mechanical and metallographic tests are conducted on rolled bearing ring to get the mechanical parameters and metallographic structure. The experimental data and results show that the mechanical properties of bearing ring produced by casting-rolling compound forming technology are up to industrial standard, and a qualified bearing ring can be successfully formed by employing this new technology. Through the study, a process of forming large bearing ring directly by using casting ring blank is obtained, which could provide an effective theoretical guidance for manufacturing large ring parts. It also has an edge in saving material, lowering energy and improving efficiency.

  11. Blank problems in trace analysis of diethylhexyl and dibutyl phthalate: investigation of the sources, tips and tricks.

    PubMed

    Fankhauser-Noti, Anja; Grob, Koni

    2007-01-23

    The analysis of phthalates, particularly that of di(2-ethylhexyl)phthalate (DEHP) and dibutyl phthalate (DBP), is notorious for blank problems. Methods and tools are listed to identify the sources and reduce the system contamination to below 1 pg DEHP and DBP or below 1 ng mL(-1) of sample solution. Once direct contact with phthalate-containing plastic articles is ruled out, the air is the major source, primarily via absorption to the surfaces of laboratory glass ware. A main improvement was achieved by cleaning solvents with aluminium oxide permanently left in the reservoirs. The data enables to estimate the contamination to be expected and to design methods keeping blanks below a critical threshold. PMID:17386513

  12. Mask blank defect printability comparison using optical and SEM mask and wafer inspection and bright field actinic mask imaging

    NASA Astrophysics Data System (ADS)

    Mangat, Pawitter; Verduijn, Erik; Wood, Obert R.; Benk, Markus P.; Wojdyla, Antoine; Goldberg, Kenneth A.

    2015-07-01

    Despite significant enhancements in defect detection using optical and e-beam methodology, the smaller length scales and increasing challenges of future technology nodes motivate ongoing research into the need and associated cost of actinic inspection for EUV masks. This paper reports an extensive study of two EUV patterned masks, wherein the mask blank defectivity was characterized using optical (mask and wafer) methods and bright-field mask imaging (using the SHARP actinic microscope) of previously identified blank defects. We find that the bright field actinic imaging tool microscope captures and images many defects that are not seen by the automated optical inspection of patterned masks and printed wafers. In addition, actinic review reveals the impact of multilayer damage and depicts the printability profile which can be used as an added metric to define the patterned mask repair and defect compensation strategies.

  13. Investigation of pitch and angle in the gradual-triangle lenticular lens for point-blank LED fog lamp.

    PubMed

    Chen, Hsi-Chao; Yang, Chi-Hao

    2014-05-10

    The effects of different pitch and angle of gradual-triangle lenticular lens for the point-blank LED fog lamp were investigated under the standard of ECE R19. The novel LED fog lamp was assembled from a point-blank LED light source, a parabolic reflector, and a gradual-triangle lenticular lens. Light tracing analysis was used for the design of the gradual-triangle lenticular lens. The pitch, which varied from 1 to 6 mm, and the apex angle, which changed from 5 to 32 deg, were both investigated in regard to the gradual-triangle lenticular lens. The optimum pitch was 5 mm, and the efficiency of the lamp system and lenticular lens could reach 93% and 98.1% by simulation, respectively. The results of experiment had over 94%, which is similar to that of simulation by normalized cross correlation (NCC) for the light intensity.

  14. Rapid, automated measurement of layer thicknesses on steel coin blanks using laser-induced-breakdown spectroscopy depth profiling

    SciTech Connect

    Asimellis, George; Giannoudakos, Aggelos; Kompitsas, Michael

    2007-02-20

    We report application of a near-real-time method to determine layer thickness on electroplated coin blanks. The method was developed on a simple laser-induced-breakdown spectroscopy (LIBS) arrangement by monitoring relative emission-line intensities from key probe elements via successive laser ablation shots. This is a unique LIBS application where no other current spectroscopic method (inductively coupled plasma or x-ray fluorescence) can be applied effectively. Method development is discussed, and results with precalibrated coins are presented.

  15. Low blank rhenium isotope ratio determinations by V2O5 coated nickel filaments using negative thermal ionization mass spectrometry

    NASA Astrophysics Data System (ADS)

    Walczyk, Thomas; Hebeda, Erhard H.; Heumann, Klaus G.

    1994-02-01

    Thenium isotope ratio determinations are, in principle, possible by negative thermal ionization mass spectrometry (NTI-MS). Relatively high rhenium blanks from the commonly-used filament materials prevent accurate isotope ratio determinations, especially for small rhenium sample amounts which are of importance, for example, in geochronology in connection with the Re/Os dating method. Platinum and nickel filaments were tested by different preparation techniques to reduce the rhenium blank contribution from the filament material. The lowest rhenium blank of less than 1 pg was achieved by coating nickel filaments with V2O5 prior to degassing under high vacuum conditions at 850°C. Obviously, the vanadium--nickel oxide layer formed on the surface of the filament during this process prevents further emission of rhenium ions from the filament material. Using Ba(OH)2 for the enhancement of negative thermal ions, 1 ng of rhenium resulted in ion currents at the detector side of about 10-11 A with an ionization efficiency of up to 20%. The 185Re/187Re isotope ratio of a sample of natural isotopic composition could be determined to be 0.59818 ± 0.00026 with a relative precision of 0.04%. The isotope ratio determination for an 187Re spike was comparable in precision but the relative standard deviation of an 185Re spike was significantly higher, which could be explained by mass fractionations of oxygen in the measured ReO-4 ion. The ReO-4 ion is about 200 to 2500 times more abundant than the only other detectable rhenium ion in NTI-MSReO-3. The ReO-4/ReO-4 ratio decreases with increasing temperature. By the low blank NTI-MS technique described in this work, more precise and accurate determinations of the rhenium isotope ratio and the rhenium concentration by isotope dilution analysis from nanogramme samples are possible.

  16. Evaluating the blank contamination and recovery of sample pretreatment procedures for analyzing organophosphorus flame retardants in waters.

    PubMed

    Liang, Kang; Niu, Yumin; Yin, Yongguang; Liu, Jingfu

    2015-08-01

    Organophosphate esters (OPEs), used as flame retardants and plasticizers, are widely present in environmental waters. Development of accurate determination methods for trace OPEs in water is urgent for understanding the fate and risk of this class of emerging pollutants. However, the wide use of OPEs in experimental materials results in blank interference, which influences the accuracy of analytical results. In the present work, blank contamination and recovery of pretreatment procedures for analysis of OPEs in water samples were systematically examined for the first time. Blank contaminations were observed in filtration membranes, glass bottles, solid phase extraction cartridges, and nitrogen blowing instruments. These contaminations could be as high as 6.4-64ng/L per treatment. Different kinds of membranes were compared in terms of contamination levels left after common glassware cleaning, and a special wash procedure was proposed to eliminate the contamination from membranes. Meanwhile, adsorption of highly hydrophobic OPEs on the inside wall of glass bottles was found to be 42.4%-86.1%, which was the primary cause of low recoveries and was significantly reduced by an additional washing step with acetonitrile. This work is expected to provide guidelines for the establishment of analysis methods for OPEs in aqueous samples.

  17. Reduction in systemic and VLDL triacylglycerol concentration after a 3-month Mediterranean-style diet in high-cardiovascular-risk subjects.

    PubMed

    Perona, Javier S; Covas, María-Isabel; Fitó, Montserrat; Cabello-Moruno, Rosana; Aros, Fernando; Corella, Dolores; Ros, Emilio; Garcia, Maria; Estruch, Ramon; Martinez-Gonzalez, Miguel A; Ruiz-Gutierrez, Valentina

    2010-09-01

    The first results of the PREDIMED (PREvencion con Dieta MEDiterranea) randomized trial, after 3-month intervention, showed that the Mediterranean Diet (MD), supplemented with either virgin olive oil (VOO) or nuts, reduced systolic blood pressure, serum cholesterol and triacylglycerol (TG) concentrations and increased high-density lipoprotein (HDL)-cholesterol when compared to a control (low-fat diet) group. Serum TG levels are an independent risk factor for coronary heart disease and are strongly determined by very low-density lipoprotein (VLDL) composition, which can be specifically modified by dietary lipid source. Within the context of the PREDIMED study, we assessed the VLDL composition in 50 participants after 3 months of intake of two MD, supplemented with VOO or nuts, compared with a low-fat diet. Total and low-density lipoprotein cholesterol concentrations were reduced in subjects on the MD+nuts, whereas HDL-cholesterol increased after consumption of the MD+VOO. Serum TG concentrations were significantly lowered in both intervention groups (either the MD+nuts or MD+VOO). However, only the MD+VOO reduced the VLDL-cholesterol and VLDL-TG content and the TG/apolipoprotein B ratio in VLDL, which was used to estimate particle size. Although VLDL-TG fatty acids were very slightly modified, VLDL-TG molecular species in VLDL after consumption of the MD+nuts were characterized by a higher presence of linoleic acid (18:2, n-6), whereas after the intake of MD+VOO, they were rich in oleic acid (18:1, n-9). Therefore, we conclude that the reduction in systemic TG concentrations observed after consumption of the MD may be explained by reduction of the lipid core of VLDL and a selective modification of the molecular species composition in the particle. PMID:19962297

  18. [The possibility of forensic medical assessment of the damage to clothes caused by a blank shots with the MP-79-9TM pistol].

    PubMed

    Kutsenko, K I; Makarov, I Iu

    2013-01-01

    The authors undertook an analysis of constructional features of standard blank and non-lethal cartridges for the MP-79-9TM pistol. The composition of gunshot products and the maximum distance over which they propagate have been determined. Special attention is given to the peculiarities of the damage caused to the target cloths (cotton and woolen) by blank rounds shot from different distances. A new chemical method was used for the first time to detect the particles of gunpowder on the victim's cloth; the possibility of its application for differential diagnostics of gunshot damages inflicted by blank and traumatic cartridges affected from different distances was estimated.

  19. Irregular Periods

    MedlinePlus

    ... number of days after the last one. The Menstrual Cycle Most girls get their first period between the ... to skip periods or to have an irregular menstrual cycle. Illness, rapid weight change, or stress can also ...

  20. Efficacy and Safety of Paliperidone Palmitate 3-Month Formulation for Patients with Schizophrenia: A Randomized, Multicenter, Double-Blind, Noninferiority Study

    PubMed Central

    Xu, Haiyan; Gopal, Srihari; Nuamah, Isaac; Ravenstijn, Paulien; Janik, Adam; Schotte, Alain; Hough, David; Fleischhacker, Wolfgang W.

    2016-01-01

    Background: This double-blind, parallel-group, multicenter, phase-3 study was designed to test the noninferiority of paliperidone palmitate 3-month formulation (PP3M) to the currently marketed 1-month formulation (PP1M) in patients (age 18–70 years) with schizophrenia, previously stabilized on PP1M. Methods: After screening (≤3 weeks) and a 17-week, flexible-dosed, open-label phase (PP1M: day 1 [150mg eq. deltoid], day 8 [100mg eq. deltoid.], weeks 5, 9, and 13 [50, 75, 100, or 150mg eq., deltoid/gluteal]), clinically stable patients were randomized (1:1) to PP3M (fixed-dose, 175, 263, 350, or 525mg eq. deltoid/gluteal) or PP1M (fixed-dose, 50, 75, 100, or 150mg eq. deltoid/gluteal) for a 48-week double-blind phase. Results: Overall, 1016/1429 open-label patients entered the double-blind phase (PP3M: n=504; PP1M: n=512) and 842 completed it (including patients with relapse). PP3M was noninferior to PP1M: relapse rates were similar in both groups (PP3M: n=37, 8%; PP1M: n=45, 9%; difference in relapse-free rate: 1.2% [95% CI:-2.7%; 5.1%]) based on Kaplan-Meier estimates (primary efficacy). Secondary endpoint results (changes from double-blind baseline in positive and negative symptom score total and subscale scores, Clinical Global Impression-Severity, and Personal and Social Performance scores) were consistent with primary endpoint results. No clinically relevant differences were observed in pharmacokinetic exposures between PP3M and PP1M. Both groups had similar tolerability profiles; increased weight was the most common treatment-emergent adverse event (double-blind phase; 21% each). No new safety signals were detected. Conclusion: Taken together, PP3M with its 3-month dosing interval is a unique option for relapse prevention in schizophrenia. PMID:26902950

  1. Estimation of organic carbon blank values and error structures of the speciation trends network data for source apportionment.

    PubMed

    Kim, Eugene; Hopke, Philip K; Qin, Youjun

    2005-08-01

    Because the particulate organic carbon (OC) concentrations reported in U.S. Environment Protection Agency Speciation Trends Network (STN) data were not blank corrected, the OC blank concentrations were estimated using the intercept in particulate matter < or = 2.5 microm in aerodynamic diameter (PM2.5) regression against OC concentrations. The estimated OC blank concentrations ranged from 1 to 2.4 microg/m3 showing higher values in urban areas for the 13 monitoring sites in the northeastern United States. In the STN data, several different samplers and analyzers are used, and various instruments show different method detection limit (MDL) values, as well as errors. A comprehensive set of error structures that would be used for numerous source apportionment studies of STN data was estimated by comparing a limited set of measured concentrations and their associated uncertainties. To examine the estimated error structures and investigate the appropriate MDL values, PM2.5 samples collected at a STN site in Burlington, VT, were analyzed through the application of the positive matrix factorization. A total of 323 samples that were collected between December 2000 and December 2003 and 49 species based on several variable selection criteria were used, and eight sources were successfully identified in this study with the estimated error structures and min values among different MDL values from the five instruments: secondary sulfate aerosol (41%), secondary nitrate aerosol (20%), airborne soil (15%), gasoline vehicle emissions (7%), diesel emissions (7%), aged sea salt (4%), copper smelting (3%), and ferrous smelting (2%). Time series plots of contributions from airborne soil indicate that the highly elevated impacts from this source were likely caused primarily by dust storms.

  2. Estimation of organic carbon blank values and error structures of the speciation trends network data for source apportionment

    SciTech Connect

    Eugene Kim; Philip K. Hopke; Youjun Qin

    2005-08-01

    Because the particulate organic carbon (OC) concentrations reported in U.S. Environment Protection Agency Speciation Trends Network (STN) data were not blank corrected, the OC blank concentrations were estimated using the intercept in particulate matter {lt} 2.5 {mu}m in aerodynamic diameter (PM2.5) regression against OC concentrations. The estimated OC blank concentrations ranged from 1 to 2.4 {mu}g/m{sup 3} showing higher values in urban areas for the 13 monitoring sites in the northeastern United States. In the STN data, several different samplers and analyzers are used, and various instruments show different method detection limit (MDL) values, as well as errors. A comprehensive set of error structures that would be used for numerous source apportionment studies of STN data was estimated by comparing a limited set of measured concentrations and their associated uncertainties. To examine the estimated error structures and investigate the appropriate MDL values, PM2.5 samples collected at a STN site in Burlington, VT, were analyzed through the application of the positive matrix factorization. A total of 323 samples that were collected between December 2000 and December 2003 and 49 species based on several variable selection criteria were used, and eight sources were successfully identified in this study with the estimated error structures and min values among different MDL values from the five instruments: secondary sulfate aerosol (41%) identified as the result of emissions from coal-fired power plants, secondary nitrate aerosol (20%), airborne soil (15%), gasoline vehicle emissions (7%), diesel emissions (7%), aged sea salt (4%), copper smelting (3%), and ferrous smelting (2%). Time series plots of contributions from airborne soil indicate that the highly elevated impacts from this source were likely caused primarily by dust storms.

  3. A Preliminary Evaluation of Near-Transducer Velocities Collected with Low-Blank Acoustic Doppler Current Profiler

    USGS Publications Warehouse

    Gartner, J.W.; Ganju, N.K.

    2002-01-01

    Many streams and rivers for which the US Geological Survey must provide discharge measurements are too shallow to apply existing acoustic Doppler current profiler techniques for flow measurements of satisfactory quality. Because the same transducer is used for both transmitting and receiving acoustic signals in most Doppler current profilers, some small time delay is required for acoustic "ringing" to be damped out of transducers before meaningful measurements can be made. The result of that time delay is that velocity measurements cannot be made close to the transducer thus limiting the usefulness of these instruments in shallow regions. Manufacturers and users are constantly striving for improvements to acoustic instruments which would permit useful discharge measurements in shallow rivers and streams that are still often measured with techniques and instruments more than a century old. One promising area of advance appeared to be reduction of time delay (blank) required between transmitting and receiving signals during acoustic velocity measurements. Development of a low- or zero-blank transducer by RD Instruments3 held promise that velocity measurements could be made much closer to the transducer and thus in much shallower water. Initial experience indicates that this is not the case; limitation of measurement quality appears to be related to the physical presence of the transducer itself within the flow field. The limitation may be the result of changes to water flow pattern close to the transducer rather than transducer ringing characteristics as a function of blanking distance. Results of field experiments are discussed that support this conclusion and some minimum measurement distances from transducer are suggested based on water current speed and ADCP sample modes.

  4. Reticle blanks for extreme ultraviolet lithography: Ion beam sputter deposition of low defect density Mo/Si multilayers

    SciTech Connect

    Vernon, S.P.; Kania, D.R.; Kearney, P.A.; Levesque, R.A.; Hayes, A.V.; Druz, B.; Osten, E.; Rajan, R.; Hedge, H.

    1996-06-24

    We report on growth of low defect density Mo/Si multilayer (ML) coatings. The coatings were grown in a deposition system designed for EUVL reticle blank fabrication. Complete, 81 layer, high reflectance Mo/Si ML coatings were deposited on 150 mm dia (100) oriented Si wafer substrates using ion beam sputter deposition. Added defects, measured by optical scattering, correspond to defect densities of 2x10{sup -2}/cm{sup 2}. This represents a reduction in defect density of Mo/Si ML coatings by a factor of 10{sup 5}.

  5. Prevalence and risk factors of posttraumatic stress disorder among teachers 3 months after the Lushan earthquake: A cross-sectional study.

    PubMed

    Zhang, Jun; Zhang, Ye; Du, Changhui; Zhu, Shenyue; Huang, Yalin; Tian, Yulian; Chen, Decao; Li, Haimin; Gong, Yao; Zhang, Mengmeng; Gu, Bo

    2016-07-01

    Teachers and students often suffer from the same disaster. The prevalence of PTSD in students has been given great attention. However, in acting as mentors to students and their families, teachers are more likely to have vicarious and indirect exposure via hearing stories of their aftermath and witnessing the consequences of traumatic events. There are limited data pertaining to the prevalence of PTSD and its risk factors among teachers. A total of 316 teachers from 21 primary and secondary schools in Baoxing County were administered a project-developed questionnaire which included the items regarding demographic characteristics, earthquake-related experiences, somatic discomforts, emotional reactions, support status, and everyday functioning 2 weeks after the Lushan earthquake, and they finished a 1-to-1 telephone interview for addressing the PTSD criteria of the Mini International Neuropsychiatric Interview (MINI) 3 months after the earthquake. The prevalence of PTSD was 24.4% among teachers. Somatic discomforts (odds ratio [OR] 1.89, 95% confidence interval [CI] 1.06-3.37) were positive risk factors of PTSD. Perceived social support (OR 0.30, 95% CI 0.14-0.62) and being able to calm down (OR 0.25, 95% CI 0.09-0.75) in teaching were negative risk factors. PTSD is commonly seen among teachers after an earthquake, and risk factors of PTSD were identified. These findings may help those providing psychological health programs to find the teachers who are at high risk of PTSD in schools after an earthquake in China.

  6. Safety of purified decolorized (low anthraquinone) whole leaf Aloe vera (L) Burm. f. juice in a 3-month drinking water toxicity study in F344 rats.

    PubMed

    Shao, A; Broadmeadow, A; Goddard, G; Bejar, E; Frankos, V

    2013-07-01

    Decolorized (purified, low anthraquinone) whole leaf Aloe vera (L.) Burm. f. juice was administered at concentrations of 0%, 0.5%, 1% and 2% in the drinking water of F344Du rats for 3 months without any adverse effect. The no-observed-adverse-effect level (NOAEL) in this study was considered to be >2%w/v (>1845 mg/kg bodyweight/day for males and >2920 mg/kg bodyweight for females). The test material contained total anthraquinones at <0.1 parts per million. In the present study there was a complete absence of any histological alteration in samples from the cecum, colon (proximal, mid and distal regions). Similar concentrations of non-decolorized (unpurified, high anthraquinone) Aloe vera extracts tested in other studies have resulted in an increased incidence and severity of diarrhea and colon adenomas and carcinomas. The results of this study supports the assertion that the high levels of anthraquinone present in orally administered, non-purified whole leaf Aloe vera extract may be responsible for the adverse effects observed on the colon.

  7. Effect of a low glycaemic index diet in gestational diabetes mellitus on post-natal outcomes after 3 months of birth: a pilot follow-up study.

    PubMed

    Louie, Jimmy Chun Yu; Markovic, Tania P; Ross, Glynis P; Foote, Deborah; Brand-Miller, Jennie C

    2015-07-01

    A low glycaemic index (LGI) diet during pregnancy complicated by gestational diabetes mellitus (GDM) may offer benefits to the mother and infant pair beyond those during pregnancy. We aimed to investigate the effect of an LGI diet during pregnancy complicated with GDM on early post-natal outcomes. Fifty-eight women (age: 23-41 years; mean ± SD pre-pregnancy body mass index: 24.5 ± 5.6 kg m(-2) ) who had GDM and followed either an LGI diet (n = 33) or a conventional high-fibre diet (HF; n = 25) during pregnancy had a 75-g oral glucose tolerance test and blood lipid tests at 3 months post-partum. Anthropometric assessments were conducted for 55 mother-infant pairs. The glycaemic index of the antenatal diets differed modestly (mean ± SD: 46.8 ± 5.4 vs. 52.4 ± 4.4; P < 0.001), but there were no significant differences in any of the post-natal outcomes. In conclusion, an LGI diet during pregnancy complicated by GDM has outcomes similar to those of a conventional healthy diet. Adequately powered studies should explore the potential beneficial effects of LGI diet on risk factors for chronic disease.

  8. Effect of biostimulation on the microbial community in PCB-contaminated sediments through periodic amendment of sediment with iron.

    PubMed

    Srinivasa Varadhan, A; Khodadoust, Amid P; Brenner, Richard C

    2011-10-01

    Reductive dehalogenation of polychlorinated biphenyls (PCBs) by indigenous dehalorespiring microorganisms in contaminated sediments may be enhanced via biostimulation by supplying hydrogen generated through the anaerobic corrosion of elemental iron added to the sediment. In this study, the effect of periodic amendment of sediment with various dosages of iron on the microbial community present in sediment was investigated using phospholipid fatty acid analysis (PLFA) over a period of 18 months. Three PCB-contaminated sediments (two freshwater lake sediments and one marine sediment) were used. Signature biomarker analysis of the microbial community present in all three sediments revealed the enrichment of Dehalococcoides species, the population of which was sustained for a longer period of time when the sediment microcosms were amended with the lower dosage of iron (0.01 g iron per g dry sediment) every 6 months as compared to the blank system (without iron). Lower microbial stress levels were reported for the system periodically amended with 0.01 g of iron per g dry sediment every 6 months, thus reducing the competition from other hydrogen-utilizing microorganisms like methanogens, iron reducers, and sulfate reducers. The concentration of hydrogen in the system was found to be an important factor influencing the shift in microbial communities in all sediments with time. Periodic amendment of sediment with larger dosages of iron every 3 months resulted in the early prevalence of Geobacteraceae and sulfate-reducing bacteria followed by methanogens. An average pH of 8.4 (range of 8.2-8.6) and an average hydrogen concentration of 0.75% (range of 0.3-1.2%) observed between 6 and 15 months of the study were found to be conducive to sustaining the population of Dehalococcoides species in the three sediments amended with 0.01 g iron per g dry sediment. Biostimulation of indigenous PCB dechlorinators by the periodic amendment of contaminated sediments with low dosages of

  9. NTP 3-month toxicity studies of estragole (CAS No. 140-67-0) administered by gavage to F344/N rats and B6C3F1 mice.

    PubMed

    Bristol, D W

    2011-01-01

    Estragole is a natural organic compound that is used as an additive, flavoring agent, or fragrance in a variety of food, cleaning, and cosmetic products; as an herbal medicine; as an antimicrobial agent against acid-tolerant food microflora; and to produce synthetic anise oil. Estragole was nominated for toxicity testing by the National Institute of Environmental Health Sciences to characterize its toxicity when administered by gavage to F344/N rats and B6C3F1 mice and to determine how similar its effects might be to those of the structurally related compound, methyleugenol. Male and female F344/N rats and B6C3F1 mice were given estragole (greater than 99% pure) in corn oil by gavage for 3 months. Genetic toxicology studies were conducted in Salmonella typhimurium and mouse peripheral blood erythrocytes. Core and special study (rats only) groups of 10 male and 10 female rats and mice were administered 37.5, 75, 150, 300, or 600 mg estragole/kg body weight in corn oil by gavage, 5 days per week. The core study groups were given estragole for 3 months and the special study groups for 30 days. All core study rats survived the 3-month exposure period. Mean body weights of the 300 and 600 mg/kg groups were 73% to 92%, respectively, of those of the vehicle control groups. A staining pattern on the ventral surface anterior to the genitalia beginning at week 9 in the 300 and 600 mg/kg groups was attributed to residue of estragole or metabolites in the urine. Alterations in the erythron related to estragole administration occurred in male and female rats; male rats demonstrated a stronger response. The changes in the erythron were characterized as a microcytic, normochromic, nonresponsive anemia. There were decreases in serum iron concentration in the 300 mg/kg females and 600 mg/kg males and females. The average percent saturation of total iron binding capacity was decreased in the 600 mg/kg males and females. Dose-related increases in platelet counts occurred in most of

  10. NTP 3-month toxicity studies of estragole (CAS No. 140-67-0) administered by gavage to F344/N rats and B6C3F1 mice.

    PubMed

    Bristol, D W

    2011-01-01

    Estragole is a natural organic compound that is used as an additive, flavoring agent, or fragrance in a variety of food, cleaning, and cosmetic products; as an herbal medicine; as an antimicrobial agent against acid-tolerant food microflora; and to produce synthetic anise oil. Estragole was nominated for toxicity testing by the National Institute of Environmental Health Sciences to characterize its toxicity when administered by gavage to F344/N rats and B6C3F1 mice and to determine how similar its effects might be to those of the structurally related compound, methyleugenol. Male and female F344/N rats and B6C3F1 mice were given estragole (greater than 99% pure) in corn oil by gavage for 3 months. Genetic toxicology studies were conducted in Salmonella typhimurium and mouse peripheral blood erythrocytes. Core and special study (rats only) groups of 10 male and 10 female rats and mice were administered 37.5, 75, 150, 300, or 600 mg estragole/kg body weight in corn oil by gavage, 5 days per week. The core study groups were given estragole for 3 months and the special study groups for 30 days. All core study rats survived the 3-month exposure period. Mean body weights of the 300 and 600 mg/kg groups were 73% to 92%, respectively, of those of the vehicle control groups. A staining pattern on the ventral surface anterior to the genitalia beginning at week 9 in the 300 and 600 mg/kg groups was attributed to residue of estragole or metabolites in the urine. Alterations in the erythron related to estragole administration occurred in male and female rats; male rats demonstrated a stronger response. The changes in the erythron were characterized as a microcytic, normochromic, nonresponsive anemia. There were decreases in serum iron concentration in the 300 mg/kg females and 600 mg/kg males and females. The average percent saturation of total iron binding capacity was decreased in the 600 mg/kg males and females. Dose-related increases in platelet counts occurred in most of

  11. Accurate Die Design for Automotive Panel Stamping Considering the Compensation Related with Die Deflection and Blank Thinning

    NASA Astrophysics Data System (ADS)

    Chen, Jun; Xu, Dongkai; Xia, Guodong; Li, Xifeng; Chen, Jieshi; Zhang, Jian; Yan, Wei; Li, Yue

    2011-08-01

    In order to improve assembly accuracy, automotive body panels have to be fabricated with higher dimensional and surface quality requirements, therefore the die faces should be designed more accurately to consider more relevant factors. In the presented study, we proposed algorithms to realize the following functions: through forming process simulation, the thinning distribution on the deformed blank was extracted as first kind of compensation; through die structural CAE analysis which automatically mapped the boundary contact forces onto the die surfaces from process simulation results, the die deflection was calculated as second kind of compensation. These two quantitative contributions were added together to compensate the die face. The proposed methodologies were programmed and integrated with LS-Dyna and HyperWorks, and also integrated with Autoform and CATIA linear CAE functionalities separately. In addition, a software toolkit to calculate the contacting ratio was also developed to evaluate the effectiveness of die face compensation. The second toolkit developed was verified by an automotive structural part forming die design, through die compensation and geometric optimization, the predicted contact ratio between the die face and formed blank was improved a lot, and the first toolkit was testified by a fender drawing die design. It shows that the die face compensation can be realized and integrated seamlessly between CAD model, process simulation model and die structural CAE model with the help of data I/O tools developed by the authors.

  12. Design study of the geometry of the blanking tool to predict the burr formation of Zircaloy-4 sheet

    NASA Astrophysics Data System (ADS)

    Ha, Jisun; Lee, Hyungyil; Kim, Dongchul; Kim, Naksoo

    2013-12-01

    In this work, we investigated factors that influence burr formation for zircaloy-4 sheet used for spacer grids of nuclear fuel roads. Factors we considered are geometric factors of punch. We changed clearance and velocity in order to consider the failure parameters, and we changed shearing angle and corner radius of L-shaped punch in order to consider geometric factors of punch. First, we carried out blanking test with failure parameter of GTN model using L-shaped punch. The tendency of failure parameters and geometric factors that affect burr formation by analyzing sheared edges is investigated. Consequently, geometric factor's influencing on the burr formation is also high as failure parameters. Then, the sheared edges and burr formation with failure parameters and geometric factors is investigated using FE analysis model. As a result of analyzing sheared edges with the variables, we checked geometric factors more affect burr formation than failure parameters. To check the reliability of the FE model, the blanking force and the sheared edges obtained from experiments are compared with the computations considering heat transfer.

  13. Blank-comparison matching-to-sample reveals a false positive symmetry test in a capuchin monkey

    PubMed Central

    de Faria Brino, Ana Leda; da Silva Campos, Rodolfo; de Faria Galvão, Olavo; McIlvane, William Jay

    2014-01-01

    A positive symmetry test result was obtained with a capuchin monkey that had previously exhibited virtually errorless AB and BA arbitrary matching-to-sample (MTS) with different stimuli. The symmetry test (BA) followed the acquisition of a new AB relation. It seemed possible, however, that the positive result could have occurred through the exclusion of previously defined comparison stimuli and not because the new AB and BA relations had the property of symmetry. To assess this possibility, a blank-comparison MTS procedure was implemented that permitted the separate assessment of select and reject (i.e., exclusion) control with both baseline and BA matching relations. In this assessment, the monkey did not exhibit reliable BA matching when exclusion was not possible, thus showing that the symmetry result was a false positive. However, the study demonstrated the feasibility of using a blank comparison MTS procedure with capuchins. The present results may set the stage for more successful methodology for establishing desired forms of relational stimulus control in capuchins and ultimately improving the assessment of relational learning capacity in that species, other nonhuman species, and nonverbal humans. PMID:25383161

  14. 40 CFR 53.58 - Operational field precision and blank test.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... as the standard deviation or relative standard deviation of a set of PM measurements obtained..., as the standard deviation, using equation 27 of this section: ER17OC06.039 (ii) For each of the 10 test periods, also calculate and record the precision as the relative standard deviation, in...

  15. Prevalence and risk factors of posttraumatic stress disorder among teachers 3 months after the Lushan earthquake: A cross-sectional study.

    PubMed

    Zhang, Jun; Zhang, Ye; Du, Changhui; Zhu, Shenyue; Huang, Yalin; Tian, Yulian; Chen, Decao; Li, Haimin; Gong, Yao; Zhang, Mengmeng; Gu, Bo

    2016-07-01

    Teachers and students often suffer from the same disaster. The prevalence of PTSD in students has been given great attention. However, in acting as mentors to students and their families, teachers are more likely to have vicarious and indirect exposure via hearing stories of their aftermath and witnessing the consequences of traumatic events. There are limited data pertaining to the prevalence of PTSD and its risk factors among teachers. A total of 316 teachers from 21 primary and secondary schools in Baoxing County were administered a project-developed questionnaire which included the items regarding demographic characteristics, earthquake-related experiences, somatic discomforts, emotional reactions, support status, and everyday functioning 2 weeks after the Lushan earthquake, and they finished a 1-to-1 telephone interview for addressing the PTSD criteria of the Mini International Neuropsychiatric Interview (MINI) 3 months after the earthquake. The prevalence of PTSD was 24.4% among teachers. Somatic discomforts (odds ratio [OR] 1.89, 95% confidence interval [CI] 1.06-3.37) were positive risk factors of PTSD. Perceived social support (OR 0.30, 95% CI 0.14-0.62) and being able to calm down (OR 0.25, 95% CI 0.09-0.75) in teaching were negative risk factors. PTSD is commonly seen among teachers after an earthquake, and risk factors of PTSD were identified. These findings may help those providing psychological health programs to find the teachers who are at high risk of PTSD in schools after an earthquake in China. PMID:27442675

  16. Fractional Erbium laser in the treatment of photoaging: randomized comparative, clinical and histopathological study of ablative (2940nm) vs. non-ablative (1540nm) methods after 3 months*

    PubMed Central

    Borges, Juliano; Cuzzi, Tullia; Mandarim-de-Lacerda, Carlos Alberto; Manela-Azulay, Mônica

    2014-01-01

    BACKGROUND Fractional non-ablative lasers keep the epidermis intact, while fractional ablative lasers remove it, making them theoretically more effective. OBJECTIVES To evaluate the clinical and histological alterations induced by fractional photothermolysis for treating photoaging, comparing the possible equivalence of multiple sessions of 1540nm Erbium, to one session of 2940nm Erbium. METHODS Eighteen patients (mean age 55.9) completed the treatment with three sessions of 1540nm fractional Erbium laser on one side of the face (50 mJ/mB, 15ms, 2 passes), and one session of 2940nm on the other side (5mJ/mB, 0.25ms, 2 passes). Biopsies were performed before and 3 months after treatment. Clinical, histological and morphometric evaluations were carried out. RESULTS All patients presented clinical improvement with no statistically significant difference (p> 0.05) between the treated sides. Histopathology revealed a new organization of collagen and elastic fibers, accompanied by edema, which was more evident with the 2940nm laser. This finding was confirmed by morphometry, which showed a decrease in collagen density for both treatments, with a statistical significance for the 2940nm laser (p > 0.001). CONCLUSIONS Three 1540nm sessions were clinically equivalent to one 2940nm session. The edema probably contributed to the positive results after three months, togheter with the new collagen and elastic fibers organization. The greater edema after the 2940nm session indicates that dermal remodeling takes longer than with 1540nm. It is possible that this histological superiority relates to a more prolonged effect, but a cohort longer than three months is needed to confirm that supposition. PMID:24770501

  17. Factors influencing quality of anticoagulation control and warfarin dosage in patients after aortic valve replacement within the 3 months of follow up.

    PubMed

    Wypasek, E; Mazur, P; Bochenek, M; Awsiuk, M; Grudzien, G; Plincer, D; Undas, A

    2016-06-01

    Warfarin dosage estimation using the pharmacogenetic algorithms has been shown to improve the quality of anticoagulation control in patients with atrial fibrillation. We sought to assess the genetic, demographic and clinical factors that determine the quality of anticoagulation in patients following aortic valve replacement (AVR). We studied 200 consecutive patients (130 men) aged 63 ± 12.3 years, undergoing AVR, in whom warfarin dose was established using a pharmacogenetic algorithm. The quality of anticoagulation within the first 3 months since surgery was expressed as the time of international normalized ratio (INR) in the therapeutic range (TTR). The median TTR in the entire cohort was 59.6% (interquartile range, 38.7 - 82.7). Ninety-nine (49.5%) patients with TTR ≥ 60% did not differ from those with poor anticoagulation control (TTR < 60%) with regard to demographic and cardiovascular risk factors. Coronary artery disease (n = 84, 42%) and previous stroke (n = 5, 2.5%) predicted higher TTR, while possession of CYP2C9*2 variant allele (n = 49, 25%) was associated with lower TTR (P = 0.01). In turn, VKORC1 c.-1639A, CYP2C9*2 and *3 variants were independently associated with actual warfarin dose (P < 0.0001). In AVR patients better anticoagulation control is observed in patients with coronary artery disease and history of stroke, which might result in part from previous lifestyle modification and therapy. Possession of CYP2C9*2 and/or CYP2C9*3 allele variants is associated with lower TTR values and warfarin dose variations in AVR patients, the latter affected also by VKORC1 c.-1693G>A polymorphism. PMID:27511999

  18. Usability, Participant Acceptance, and Safety of a Prefilled Insulin Injection Device in a 3-Month Observational Survey in Everyday Clinical Practice in Australia

    PubMed Central

    Carter, John; Beilin, Jonathan; Morton, Adam; De Luise, Mario

    2009-01-01

    Background SoloSTAR® (SOL; sanofi-aventis, Paris, France) is a prefilled insulin pen device for the injection of insulin glargine and insulin glulisine. This is the first Australian survey to determine its usability, participant acceptance, and safety in clinical practice. Methods A 3-month, nonrandomized, noncomparative, observational survey in Australia was conducted in individuals with diabetes. Participants were given SOL pens containing glargine, the instruction leaflet, and a toll-free helpline number. Training was offered to all participants. Safety data, including product technical complaints (PTCs), were gathered from ongoing feedback given by the participant or health care professional (HCP) and by independent interviews conducted 6–10 weeks after study start. Results Some 2674 people consented to take part across 93 sites (150 HCPs), and 2029 participated in interviews. Of these, 52.6% had type 1 diabetes, 16.3% had manual dexterity problems, and 15.5% had poor eyesight not corrected by glasses. At the time of interview, 96.8% of participants were still using SOL. None of the eight PTCs reported were due to technical defects; most were related to handling errors. Some 62 participants reported 77 adverse events; none were related to a PTC. The vast majority of participants (95.4%) were “very satisfied” or “satisfied” with using SOL, and 89.7% of the participants had no questions or concerns using SOL on a daily basis. Similar positive findings were reported by participants with manual or dexterity impairments. Conclusions In this survey of everyday clinical practice, SOL had a good safety profile and was very well accepted by participants. PMID:20144398

  19. 40 CFR 53.58 - Operational field precision and blank test.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... section 6 of 40 CFR part 50, appendix L, conditioned and preweighed as required by section 8 of 40 CFR..., calculate and record the average of the three measured PM concentrations as Cave,j where j is the test period using equation 26 of this section: ER41AD07.005 (ii) If Cave,j < 3 µg/m 3 for any test...

  20. Determination of elastoplastic mechanical properties of the weld and heat affected zone metals in tailor-welded blanks by nanoindentation test

    NASA Astrophysics Data System (ADS)

    Ma, Xiangdong; Guan, Yingping; Yang, Liu

    2015-09-01

    The elastoplastic mechanical properties of the weld and heat affected zone metals have comparatively major impact on the forming process of tailor-welded blanks. A few scholars investigated the elastoplastic mechanical properties of the weld and heat affected zone, but they only simply assumed that it was a uniform distribution elastoplastic material different from the base materials. Four types of tailor-welded blanks which consist of ST12 and 304 stainless steel plates are selected as the research objects, the elastoplastic mechanical properties of the tailor-welded blanks weld and heat affected zone metals are obtained based on the nanoindentation tests, and the Erichsen cupping tests are conducted by combining numerical simulation with physical experiment. The nanoindentation tests results demonstrate that the elastoplastic mechanical properties of the weld and heat affected zone metals are not only different from the base materials, but also varying between the weld metals and the heat affected zone metals. Comparing the Erichsen cupping test resulted from numerical with that from experimental method, it is found that the numerical value of Erichsen cupping test which consider the elastoplastic mechanical properties of the weld and heat affected zone metals have a good agreement with the experimental result, and the relative error is only 4.8%. The proposed research provides good solutions for the inhomogeneous elastoplastic mechanical properties of the tailor-welded blanks weld and heat affected zone metals, and improves the control performance of tailor-welded blanks forming accuracy.

  1. A model study of the pollution effects of the first 3 months of the Holuhraun volcanic fissure: comparison with observations and air pollution effects

    NASA Astrophysics Data System (ADS)

    Steensen, Birthe Marie; Schulz, Michael; Theys, Nicolas; Fagerli, Hilde

    2016-08-01

    Norway, a region with frequent precipitation during westerly winds. Over a 3-month average (during SON 2014) over Europe, SO2 and PM2.5 surface concentrations, due to the volcanic emissions, increased by only ten and 6 % respectively. Although the percent increase of PM2.5 concentration is highest over Scandinavia and Scotland, an increase in PM exceedance days is found over Ireland and the already polluted Benelux region (up to 3 additional days), where any small increase in particulate matter concentration leads to an increase in exceedance days.

  2. Anammox enrichment from reject water on blank biofilm carriers and carriers containing nitrifying biomass: operation of two moving bed biofilm reactors (MBBR).

    PubMed

    Zekker, Ivar; Rikmann, Ergo; Tenno, Toomas; Lemmiksoo, Vallo; Menert, Anne; Loorits, Liis; Vabamäe, Priit; Tomingas, Martin; Tenno, Taavo

    2012-07-01

    The anammox bacteria were enriched from reject water of anaerobic digestion of municipal wastewater sludge onto moving bed biofilm reactor (MBBR) system carriers-the ones initially containing no biomass (MBBR1) as well as the ones containing nitrifying biomass (MBBR2). Duration of start-up periods of the both reactors was similar (about 100 days), but stable total nitrogen (TN) removal efficiency occurred earlier in the system containing nitrifying biomass. Anammox TN removal efficiency of 70% was achieved by 180 days in both 20 l volume reactors at moderate temperature of 26.0°C. During the steady state phase of operation of MBBRs the average TN removal efficiencies and maximum TN removal rates in MBBR1 were 80% (1,000 g-N/m(3)/day, achieved by 308 days) and in MBBR2 85% (1,100 g-N/m(3)/day, achieved by 266 days). In both reactors mixed bacterial cultures were detected. Uncultured Planctomycetales bacterium clone P4, Candidatus Nitrospira defluvii and uncultured Nitrospira sp. clone 53 were identified by PCR-DGGE from the system initially containing blank biofilm carriers as well as from the nitrifying biofilm system; from the latter in addition to these also uncultured ammonium oxidizing bacterium clone W1 and Nitrospira sp. clone S1-62 were detected. FISH analysis revealed that anammox microorganisms were located in clusters in the biofilm. Using previously grown nitrifying biofilm matrix for anammox enrichment has some benefits over starting up the process from zero, such as less time for enrichment and protection against severe inhibitions in case of high substrate loading rates.

  3. A reliability study of springback on the sheet metal forming process under probabilistic variation of prestrain and blank holder force

    NASA Astrophysics Data System (ADS)

    Mrad, Hatem; Bouazara, Mohamed; Aryanpour, Gholamreza

    2013-08-01

    This work deals with a reliability assessment of springback problem during the sheet metal forming process. The effects of operative parameters and material properties, blank holder force and plastic prestrain, on springback are investigated. A generic reliability approach was developed to control springback. Subsequently, the Monte Carlo simulation technique in conjunction with the Latin hypercube sampling method was adopted to study the probabilistic springback. Finite element method based on implicit/explicit algorithms was used to model the springback problem. The proposed constitutive law for sheet metal takes into account the adaptation of plastic parameters of the hardening law for each prestrain level considered. Rackwitz-Fiessler algorithm is used to find reliability properties from response surfaces of chosen springback geometrical parameters. The obtained results were analyzed using a multi-state limit reliability functions based on geometry compensations.

  4. Modeling and Simulating Material Behavior during Hot Blank - Cold Die (HB-CD) Stamping of Aluminium Alloy Sheets

    NASA Astrophysics Data System (ADS)

    Zhang, Nan; Abu-Farha, Fadi

    2016-08-01

    Hot blank - cold die (HB-CD) stamping, non-isothermal hot stamping, of aluminium alloy sheets offers great opportunities for high production rates at low cost, while overcoming limited material formability issues. Yet developing an accurate model that can describe the complex material behavior over the wide ranging conditions of HB-CD stamping (temperatures ranging between 25 and 350 °C) is challenging. Moreover, validation of the developed models under transient conditions is problematic. This work presents he results of a comprehensive characterization, material modeling, FE simulation and experimental validation effort to capture the behavior of an aluminium alloy sheet during HB-CD stamping. In particular, we highlight the integration between temperature measurements (thermography) and strain measurements (digital image correlation) for the accurate validation of model predictions of non-isothermal material deformation.

  5. On becomine a psychiatrist: discussion of "Empathy and intuition in becoming a psychiatrist," by Ronald J. Blank.

    PubMed

    Langs, R

    1976-01-01

    Using the data from Blank's (1976) description of his clinical efforts with his first patient, selected tissues on becoming a psychiatrist and psychotherapist are explored. Considered among the motives for entering this profession are opportunities for the therapist to projectively identify into his patients, and to introjectively identify with and contain his patients' psychopathology. The relationship between empathy and intuition on the one hand, and projection and projective identification on the other, is also studied, as is the need for the application of the validating process in confirming all so-called empathic and intuitive responses on the part of the therapist. Counter-transference influences on the experience and use of empathy and intuition are also investigated. The development of therapeutic misalliances and framework "cures," the distinction between transference and nontransference, the constructive elements contained in essentially countertransference-based interventions, the mastery of countertransference difficulties, and the choice of insight-oriented versus noninsightful therapeutic modalities are discussed.

  6. Impact of the phase defect structure on an actinic dark-field blank inspection signal and wafer printability

    NASA Astrophysics Data System (ADS)

    Amano, Tsuyoshi; Murachi, Tetsunori; Yamane, Takeshi; Arisawa, Yukiyasu; Terasawa, Tsuneo

    2012-03-01

    A variety of phase defects (PDs) such as programmed bump and pit PDs, and native bump and pit PDs were detected by a dark-field ABI (Actinic Blank Inspection) tool. Among the PDs, some of them seemed to grow and propagate in an angular direction, away from substrate surface as was found by a TEM analysis. This presentation reports on the influence of 3-D phase defect on wafer printability, and on defect detection signals of an ABI tool. The result shows that the impact of the inclination angle on printing performance was quite significant when the PDs were not covered with the absorber pattern. On the other hand, the defect detection signal intensity was negligibly small in the case where the inclination angle was less than 9 degrees. However, ABI with its high magnification optics can pinpoint the PD's actual location as defined by the EUV light, rather than the ones that are not so clearly define by the surface topography.

  7. Shielding gas influences on laser weldability of tailored blanks of advanced automotive steels

    NASA Astrophysics Data System (ADS)

    Reisgen, Uwe; Schleser, Markus; Mokrov, Oleg; Ahmed, Essam

    2010-12-01

    The effects of shielding gas types and flow rates on CO 2 laser weldability of DP600/TRIP700 steel sheets were studied in this work. The evaluated shielding gases were helium (He), argon (Ar) and different mixtures of He and Ar. Weld penetration, tensile strength and formability (Erichsen test) of laser welds were found to be strongly dependent upon the shielding gas types. The ability of shielding gas in removing plasma plume and thus increasing weld penetration is believed to be closely related to ionization potential and atomic weight which determine the period of plasma formation and disappearance. It was found that the higher helium shielding gas flow rate, the deeper weld penetration and the lower weld width.

  8. Radiocarbon Analysis of Individual Amino Acids: Carbon Blank Quantification for a Small-Sample High-Pressure Liquid Chromatography Purification Method.

    PubMed

    Bour, Amy L; Walker, Brett D; Broek, Taylor A B; McCarthy, Matthew D

    2016-04-01

    Compound-specific radiocarbon analysis (CSRA) of amino acids (AAs) is of great interest as a proxy for organic nitrogen (N) cycling rates, dating archeological bone collagen, and investigating processes shaping the biogeochemistry of global N reservoirs. However, recoverable quantities of individual compounds from natural samples are often insufficient for radiocarbon ((14)C) analyses (<50 μg C). Constraining procedural carbon (C) blanks and their isotopic contributions is critical for reporting of accurate CSRA measurements. Here, we report the first detailed quantification of C blanks (including sources, magnitudes, and variability) for a high-pressure liquid chromatography (HPLC) method designed to purify individual AAs from natural samples. We used pairs of AA standards with either modern (M) or dead (D) fraction modern (Fm) values to quantify MC and DC blanks within several chromatographic regions. Blanks were determined for both individual and mixed AA standard injections with peak loadings ranging from 10 to 85 μg C. We found 0.8 ± 0.4 μg of MC and 1.0 ± 0.5 μg of DC were introduced by downstream sample preparation (drying, combustion, and graphitization), which accounted for essentially the entire procedural blank for early eluting AAs. For late-eluting AAs, higher eluent organic content and fraction collected volumes contributed to total blanks of 1.5 ± 0.75 μg of MC and 3.0 ± 1.5 μg of DC. Our final measurement uncertainty for 20 μg of C of most AAs was ±0.02 Fm, although sample size requirements are larger for similar uncertainty in late-eluting AAs. These results demonstrate the first CSRA protocol for many protein AAs with uncertainties comparable to the lowest achieved in prior studies.

  9. Design and evaluation of a field study on the contamination of selected volatile organic compounds and wastewater-indicator compounds in blanks and groundwater samples

    USGS Publications Warehouse

    Thiros, Susan A.; Bender, David A.; Mueller, David K.; Rose, Donna L.; Olsen, Lisa D.; Martin, Jeffrey D.; Bernard, Bruce; Zogorski, John S.

    2011-01-01

    The Field Contamination Study (FCS) was designed to determine the field processes that tend to result in clean field blanks and to identify potential sources of contamination to blanks collected in the field from selected volatile organic compounds (VOCs) and wastewater-indicator compounds (WICs). The VOCs and WICs analyzed in the FCS were detected in blanks collected by the U.S. Geological Survey (USGS) National Water-Quality Assessment (NAWQA) Program during 1996-2008 and 2002-08, respectively. To minimize the number of variables, the study required ordering of supplies just before sampling, storage of supplies and equipment in clean areas, and use of adequate amounts of purge-and-trap volatile-grade methanol and volatile pesticide-grade blank water (VPBW) to clean sampling equipment and to collect field blanks. Blanks and groundwater samples were collected during 2008-09 at 16 sites, which were a mix of water-supply and monitoring wells, located in 9 States. Five different sample types were collected for the FCS at each site: (1) a source-solution blank collected at the USGS National Water Quality Laboratory (NWQL) using laboratory-purged VPBW, (2) source-solution blanks collected in the field using laboratory-purged VPBW, (3) source-solution blanks collected in the field using field-purged VPBW, (4) a field blank collected using field-purged VPBW, and (5) a groundwater sample collected from a well. The source-solution blank and field-blank analyses were used to identify, quantify, and document extrinsic contamination and to help determine the sources and causes of data-quality problems that can affect groundwater samples. Concentrations of compounds detected in FCS analyses were quantified and results were stored in the USGS National Water Information System database after meeting rigorous identification and quantification criteria. The study also utilized information provided by laboratory analysts about evidence indicating the presence of selected compounds

  10. Periodic Polymers

    NASA Astrophysics Data System (ADS)

    Thomas, Edwin

    2013-03-01

    Periodic polymers can be made by self assembly, directed self assembly and by photolithography. Such materials provide a versatile platform for 1, 2 and 3D periodic nano-micro scale composites with either dielectric or impedance contrast or both, and these can serve for example, as photonic and or phononic crystals for electromagnetic and elastic waves as well as mechanical frames/trusses. Compared to electromagnetic waves, elastic waves are both less complex (longitudinal modes in fluids) and more complex (longitudinal, transverse in-plane and transverse out-of-plane modes in solids). Engineering of the dispersion relation between wave frequency w and wave vector, k enables the opening of band gaps in the density of modes and detailed shaping of w(k). Band gaps can be opened by Bragg scattering, anti-crossing of bands and discrete shape resonances. Current interest is in our group focuses using design - modeling, fabrication and measurement of polymer-based periodic materials for applications as tunable optics and control of phonon flow. Several examples will be described including the design of structures for multispectral band gaps for elastic waves to alter the phonon density of states, the creation of block polymer and bicontinuous metal-carbon nanoframes for structures that are robust against ballistic projectiles and quasi-crystalline solid/fluid structures that can steer shock waves.

  11. Initial Molecular Response at 3 Months May Predict Both Response and Event-Free Survival at 24 Months in Imatinib-Resistant or -Intolerant Patients With Philadelphia Chromosome–Positive Chronic Myeloid Leukemia in Chronic Phase Treated With Nilotinib

    PubMed Central

    Branford, Susan; Kim, Dong-Wook; Soverini, Simona; Haque, Ariful; Shou, Yaping; Woodman, Richard C.; Kantarjian, Hagop M.; Martinelli, Giovanni; Radich, Jerald P.; Saglio, Giuseppe; Hochhaus, Andreas; Hughes, Timothy P.; Müller, Martin C.

    2012-01-01

    Purpose The association between initial molecular response and longer-term outcomes with nilotinib was examined. Patients and Methods Patients with imatinib-resistant or -intolerant chronic myeloid leukemia in chronic phase from the phase II nilotinib registration study with available postbaseline BCR-ABL1 transcript assessments were included (N = 237). Results BCR-ABL1 transcript levels (International Scale [IS]) at 3 months correlated with complete cytogenetic response (CCyR) by 24 months. Patients with BCR-ABL1 (IS) of > 1% to ≤ 10% at 3 months with nilotinib had higher cumulative incidence of CCyR by 24 months than patients with BCR-ABL1 (IS) of > 10% (53% v 16%). BCR-ABL1 (IS) at 3 months predicted major molecular response (MMR) by 24 months. Cumulative incidence of MMR by 24 months for patients with BCR-ABL1 (IS) of > 0.1% to ≤ 1%, > 1% to ≤ 10%, and > 10% was 65%, 27%, and 9%, respectively. These differences were observed for patients with or without baseline BCR–ABL1 mutations and for those with imatinib resistance or intolerance. Estimated event-free survival (EFS) rates at 24 months decreased with higher transcript levels at 3 months; patients with BCR-ABL1 (IS) of ≤ 1% had an estimated 24-month EFS rate of 82%, compared with 70% for patients with BCR-ABL1 (IS) of > 1% to ≤ 10% and 48% for patients with BCR-ABL1 (IS) of > 10%. Conclusion Patients with BCR-ABL1 (IS) of > 10% at 3 months had a lower cumulative incidence of CCyR and MMR and lower rates of EFS versus patients with BCR-ABL1 (IS) of ≤ 10%. Prospective studies may determine whether close monitoring or alternative therapies are warranted for patients with minimal initial molecular response. PMID:23109697

  12. A Study on the Welding Characteristics of Tailor Welded Blank Metal Sheets Using GTAW and Laser Welding

    NASA Astrophysics Data System (ADS)

    Thasanaraphan, Pornsak

    In this study, a computational and experimental effort was carried out to qualitatively understand the weld pool shape, distortion and residual stress for continuous laser welding and manual pulsed gas metal arc welding. For all the welding simulations given in this dissertation, a welding specific finite element package, SYSWELD, is used. This research focuses on the welding behavior observed in light-weight metal structures known as the tailor-welded blanks, TWBs. They are a combination of two or more metal sheets with different thickness and/or different materials that are welded together in a single plane prior to forming, e.g., stamping. They made from the low carbon steel. As laser welding experiment results show, the weld pool shape at the top and bottom surface, is strongly influenced by surface tension, giving it a characteristic hourglass shape. In order to simulate the hourglass shape, a new volumetric heat source model was developed to predict the transient temperature profile and weld pool shape, including the effect of surface tension. Tailor welded blanks with different thicknesses were examined in the laser welding process. All major physical phenomena such as thermal conduction, heat radiation and convection heat losses are taken into account in the model development as well as temperature-dependant thermal and mechanical material properties. The model is validated for the case of butt joint welding of cold rolled steel sheets. The results of the numerical simulations provide temperature distributions representing the shape of the molten pool, distortion and residual stress with varying laser beam power and welding speed. It is demonstrated that the finite element simulation results are in good agreement with the experiment results. This includes the weld pool shape and sheet metal distortion. While there is no experimental data to compare directly with residual stress results, the distorted shape provides an indirect measure of the welding

  13. Can we still dream when the mind is blank? Sleep and dream mentations in auto-activation deficit.

    PubMed

    Leu-Semenescu, Smaranda; Uguccioni, Ginevra; Golmard, Jean-Louis; Czernecki, Virginie; Yelnik, Jerome; Dubois, Bruno; Forgeot d'Arc, Baudouin; Grabli, David; Levy, Richard; Arnulf, Isabelle

    2013-10-01

    Bilateral damage to the basal ganglia causes auto-activation deficit, a neuropsychological syndrome characterized by striking apathy, with a loss of self-driven behaviour that is partially reversible with external stimulation. Some patients with auto-activation deficit also experience a mental emptiness, which is defined as an absence of any self-reported thoughts. We asked whether this deficit in spontaneous activation of mental processing may be reversed during REM sleep, when dreaming activity is potentially elicited by bottom-up brainstem stimulation on the cortex. Sleep and video monitoring over two nights and cognitive tests were performed on 13 patients with auto-activation deficit secondary to bilateral striato-pallidal lesions and 13 healthy subjects. Dream mentations were collected from home diaries and after forced awakenings in non-REM and REM sleep. The home diaries were blindly analysed for length, complexity and bizarreness. A mental blank during wakefulness was complete in six patients and partial in one patient. Four (31%) patients with auto-activation deficit (versus 92% of control subjects) reported mentations when awakened from REM sleep, even when they demonstrated a mental blank during the daytime (n = 2). However, the patients' dream reports were infrequent, short, devoid of any bizarre or emotional elements and tended to be less complex than the dream mentations of control subjects. The sleep duration, continuity and stages were similar between the groups, except for a striking absence of sleep spindles in 6 of 13 patients with auto-activation deficit, despite an intact thalamus. The presence of spontaneous dreams in REM sleep in the absence of thoughts during wakefulness in patients with auto-activation deficit supports the idea that simple dream imagery is generated by brainstem stimulation and is sent to the sensory cortex. However, the lack of complexity in these dream mentations suggests that the full dreaming process (scenario

  14. Effects of Post-Weld Heat Treatment on the Mechanical Properties of Similar- and Dissimilar-Alloy Friction Stir Welded Blanks

    SciTech Connect

    Zadpoor, Amir Abbas; Sinke, Jos

    2011-01-17

    Friction stir welding is a solid state joining process with relatively low welding temperatures. Nevertheless, the mechanical properties of friction stir welded blanks are degraded after welding. Indeed, both strength and ductility of the welds are decreased after welding. Often, the resulting friction stir welded blanks need to be formed to their final structural shape. Therefore, the formability of friction stir welded blanks is of primary importance in the manufacturing of structural parts. This paper studies how the mechanical properties and particularly formability of friction stir welded blanks can be improved by applying a post weld heat treatment. Two aluminum alloys from 2000 and 7000 series, namely 2024-T3 and 7075-T6, are selected for the study. The sheet thickness of both materials is 2,0 mm. The selected alloys are welded in three configurations: 2024-T3 and 2024-T3, 7075-T6 and 7075-T6, and 2024-T3 and 7075-T6. The resulting welds are naturally aged for a few months. Three sets of standard dog bone shape tensile test specimens are then machined from the welds. The first set of the specimens is tested without any heat treatment. The second set of the specimens is solution heat treated and quenched before testing. The third set of the specimens is solution heat treated, quenched, and naturally aged for a week before testing. The mechanical properties of the three different sets of specimens are compared with each other. It is shown that careful selection of post weld heat-treatment can greatly improve the formability of friction stir welded blanks.

  15. The Mars Phoenix Thermal Evolved-Gas Analysis: The Role of an Organic Free Blank in the Search for Organics

    NASA Technical Reports Server (NTRS)

    Lauer, H. V., Jr.; Ming, Douglas W.; Sutter, B.; Golden, D. C.; Morris, Richard V.; Boynton, W. V.

    2008-01-01

    The Thermal Evolved-Gas Analyzer (TEGA) instrument onboard the 2007 Phoenix Lander will perform differential scanning calorimetry (DSC) and evolved-gas analysis of soil samples collected from the surface. Data from the instrument will be compared with Mars analog mineral standards, collected under TEGA Mars-like conditions to identify the volatile-bearing mineral phases [1] (e.g., Fe-oxyhydroxides, phyllosilicates, carbonates, and sulfates) found in the Martian soil. Concurrently, the instrument will be looking for indications of organics that might also be present in the soil. Organic molecules are necessary building blocks for life, although their presence in the ice or soil does not indicate life itself. The spacecraft will certainly bring organic contaminants to Mars even though numerous steps were taken to minimize contamination during the spacecraft assembly and testing. It will be essential to distinguish possible Mars organics from terrestrial contamination when TEGA instrument begins analyzing icy soils. To address the above, an Organic Free Blank (OFB) was designed, built, tested, and mounted on the Phoenix spacecraft providing a baseline for distinguishing Mars organics from terrestrial organic contamination. Our objective in this report is to describe some of the considerations used in selecting the OFB material and then report on the processing and analysis of the final candidate material

  16. High-performance 6-inch EUV mask blanks produced under real production conditions by ion-beam sputter deposition

    NASA Astrophysics Data System (ADS)

    Becker, Hans W.; Sobel, Frank; Aschke, Lutz; Renno, Markus; Krieger, Juergen; Buttgereit, Ute; Hess, Guenter; Lenzen, Frank; Knapp, Konrad; Yulin, Sergey A.; Feigl, Torsten; Kuhlmann, Thomas; Kaiser, Norbert

    2002-12-01

    EUV mask blanks consist of two thin film systems deposited on low thermal expansion 6 inch substrates (LTEM). First there is the multilayer stack with around 100 alternating layers of elements with different optical properties which are topped by a capping layer. The absorber stack which consists of a buffer and a absorber layer is next. Here a minimum absorption of EUV light of 99 % is required. The stress in both layer systems should be as low as possible. The reduction of defects to an absolute minimum is one of the main challenges. The high-reflective Mo/Si multilayer coatings were designed for normal incidence reflectivity and successfully deposited on 6-inch LTEM substrates by ion-beam sputtering. X-ray scattering, transmission electron microscopy and atomic force microscopy were used for characterization of the multilayer interfaces and the surface morphology. The results are correlated to the measured normal incidence reflectivity using synchrotron radiation at the "Physikalisch- Technischen Bundesanstalt" (PTB) refelctometer at BESSY II, Berlin, Germany. A high resolution laser scanner was used to measure the particle distribution. First multilayer defect results are presented.

  17. Blank peak current-suppressed electrochemical aptameric sensing platform for highly sensitive signal-on detection of small molecule

    PubMed Central

    Zhang, Songbai; Hu, Rong; Hu, Peng; Wu, Zai-Sheng; Shen, Guo-Li; Yu, Ru-Qin

    2010-01-01

    In this contribution, an electrochemical aptameric sensing scheme for the sensitive detection of small molecules is proposed using adenosine as a target model. A ferrocene (Fc)-functionalized thiolated aptamer probe is adapted and immobilized onto an electrode surface. Introducing a recognition site for EcoRI into the aptamer sequence not only suppresses the peak current corresponding to blank sample but also provides a signal-on response mechanism. In the absence of adenosine, the aptamer can fold into a hairpin structure and form a cleavable double-stranded region. Fc is capable of being removed from electrode surface by treatment with endonuclease, and almost no peak current is observed. The adenosine/aptamer binding induces the conformational transition of designed aptamer, dissociating the cleavable double-stranded segment. Therefore, the integrated aptamer sequence is maintained when exposing to endonuclease, generating a peak current of Fc. Utilizing the present sensing scheme, adenosine even at a low concentration can give a detectable current signal. Thus, a detection limit of 10−10 M and a linear response range from 3.74 × 10−9 to 3.74 × 10−5 M are achieved. The proposed proof-of-principle of a novel electrochemical sensing is expected to extend to establish various aptameric platforms for the analysis of a broad range of target molecules of interest. PMID:20724441

  18. Contribution of the bees and combs to honey volatiles: blank-trial probe for chemical profiling of honey biodiversity.

    PubMed

    Jerković, Igor; Marijanović, Zvonimir; Ljubicić, I; Gugić, M

    2010-05-01

    This research is focused on the immediate contribution of the bees and combs to honey volatiles in order to exclude these compounds as botanical-origin biomarkers for honey authentification. Therefore, the bees were closed in a hive containing empty combs under controlled food-flow conditions (saccharose solution). The obtained 'saccharose honey' probe samples were subjected to ultrasonic solvent extraction (USE), followed by gas chromatography and mass spectrometry analyses (GC and GC/MS). A total of 66 compounds were identified. Higher alcohols made up ca. 50% of the total volatiles, mainly (Z)-octadec-9-en-1-ol, hexadecan-1-ol, and octadecan-1-ol, with minor percentages of undecan-1-ol, dodecan-1-ol, tetradecan-1-ol, pentadecan-1-ol, and heptadecan-1-ol. Other abundant compounds were saturated long-chain linear hydrocarbons, C(10)-C(25), C(27), and C(28), particularly C(23), C(25), and C(27)). Identified chemical structures were related to the composition of combs and cuticular waxes, and less to the bee pheromones. In addition, the impact of two-hour heat treatment at 80 degrees and one-year storage at room temperature on the same probe was investigated in order to identify thermal and storage artefacts. These findings can be considered as blank-trial probe (no plant source) for honey chemical profiling and identification of reliable botanical origin biomarkers. PMID:20491078

  19. Forces between blank surfaces as measured by the colloidal probe technique and by optical tweezers--a comparison.

    PubMed

    Elmahdy, Mahdy M; Drechsler, Astrid; Gutsche, Christof; Synytska, Alla; Uhlmann, Petra; Kremer, Friedrich; Stamm, Manfred

    2009-11-17

    The well-established atomic force microscopy (AFM)-based colloidal probe technique (CPT) and optical tweezers (OT) are combined to measure the interaction forces between blank SiO(2) surfaces in aqueous ionic solutions (CaCl(2)) of varying concentration at pH 7. Spherical colloids (SiO(2), diameter approximately 4.63 +/- 0.05 microm) taken out of the same batch are used by both methods. In the case of CPT, a single colloid is glued to a cantilever, and the interaction forces with a plain SiO(2) surface are determined in dependence on the concentration of the surrounding medium. For the OT studies, two colloids (one fixed to a micropipet by capillary action, the other held with the optical trap) are approached to each other in nanometer steps, and the resulting forces are measured for the same media as in the CPT experiment. Both techniques fit well to each other and enable one to cover interaction energies ranging from 10(-5) to 1 mN/m. The experimental data are well described by the Derjaguin-Landau-Verwey-Overbeek (DLVO) theory revealing that the effective surface charge density changes slightly with concentration.

  20. ADHERENCE TO RECTAL GEL USE AMONG MAINLY ETHNIC MINORITY YOUNG MEN WHO HAVE SEX WITH MEN DURING A 3-MONTH PLACEBO GEL TRIAL: IMPLICATIONS FOR MICROBICIDE RESEARCH

    PubMed Central

    Carballo-Diéguez, Alex; Giguere, Rebecca; Dolezal, Curtis; Bauermeister, José; Leu, Cheng-Shiun; Valladares, Juan; Frasca, Timothy; Labbett, Rita; Cranston, Ross D.; Febo, Irma; Mayer, Kenneth; McGowan, Ian

    2014-01-01

    To study adherence to product use prior to a Phase I microbicide trial, we recruited young men who have sex with men (YMSM) with a history of unprotected receptive anal intercourse (RAI) and provided them with 40 rectal applicators containing a placebo gel to use prior to RAI during a 12-week period. Ninety-five YMSM completed the trial. Based on a Computer Assisted Self Interview, 83 participants had receptive anal intercourse (RAI) (Median 12 occasions) using gel on 82.4% of occasions (SD 26.7; 0–100). Based on an interactive voice response system, 88 participants had RAI (Median 10 occasions) using gel on 87.9% of occasions (SD 20.0; 20–100). By applicator counts the median gel use was 12. Participants showed high adherence to gel use. Those who did not use the product consistently (n=40) adduced not having it with them (85%), forgetting to use it (48%), not wanting to use it (13%), partner refusal (10%) and gel messiness (10%). PMID:24719200

  1. The pilot study of 3-month course of melatonin treatment of patients with nonalcoholic steatohepatitis: effect on plasma levels of liver enzymes, lipids and melatonin.

    PubMed

    Gonciarz, M; Gonciarz, Z; Bielanski, W; Mularczyk, A; Konturek, P C; Brzozowski, T; Konturek, S J

    2010-12-01

    The mechanism by which nonalcoholic fatty liver disease (NAFLD) progresses into nonalcoholic steatohepatitis (NASH) is unknown, however, the major process is oxidative stress with increased production of reactive oxygen species and excessive inflammatory cytokine generation. To date, there are no effective treatments for NASH and the published data with treatment using antioxidants are not satisfactory. Melatonin (MT), the potent endogenous antioxidant secreted in circadian rhythm by pinealocytes and in large amounts in the digestive system, was reported to improve oxidative status and to exert beneficial effects in NASH pathology in experimental animals, but no study attempted to determine the possible effectiveness of MT in humans with NASH. In this study, 42 patients (12 placebo controls and 30 MT-treated) with histological evidence (liver biopsy) of NASH and no history of alcohol abuse, were included. The treatment group took melatonin (2x5 mg/daily orally), while controls were treated with placebo. At baseline no significant differences between the groups were found for age, body mass index (BMI) as well as for plasma alanine aminotransferase (ALT), aspartate aminotransferase (AST), gamma-glutamyl transpeptidase (GGT), alkaline phosphatase (ALP), and concentrations of cholesterol, triglycerides (TG), glucose and MT. During the study period plasma ALT level and cholesterol concentration decreased significantly in both MT-treated and control groups, however AST and GGT levels decreased significantly only in MT-treated groups. Median value of AST level at baseline was 76.5 (64.2-114.2) IU/L and its percentage decrease at 4, 8 and 12 week was 20, 36 and 38%, resp. Baseline GGT median level was 113 (75.7-210.7) IU/L and its mean percentage decrease at week 4, 8 and 12 was 46, 48 and 47%, resp. Plasma ALP levels did not change significantly during MT treatment. Median value of plasma concentrations of MT (pg/mL) in MT-treated group rose from 7.5 (5.0-14.25) at

  2. Complementary Effects of Genetic Variations in LEPR on Body Composition and Soluble Leptin Receptor Concentration after 3-Month Lifestyle Intervention in Prepubertal Obese Children.

    PubMed

    Gajewska, Joanna; Kuryłowicz, Alina; Mierzejewska, Ewa; Ambroszkiewicz, Jadwiga; Chełchowska, Magdalena; Weker, Halina; Puzianowska-Kuźnicka, Monika

    2016-01-01

    In obese individuals, weight loss might be affected by variants of the adipokine-encoding genes. We verified whether selected functional single nucleotide polymorphisms in LEP, LEPR and ADIPOQ are associated with changes in serum levels of the respective adipokines and weight loss in 100 prepubertal obese (SDS-BMI > 2) Caucasian children undergoing lifestyle intervention. Frequencies of the -2548G > A LEP, Q223R LEPR, K656N LEPR, -11377C > G and -11426A > G ADIPOQ polymorphisms were analyzed by restriction fragment length polymorphism. Serum adipokine and soluble leptin receptor (sOB-R) concentrations were measured using the ELISA method. Among the analyzed polymorphisms, only LEPR polymorphisms were associated with changes of SDS-BMI or sOB-R concentrations in children after therapy. Carriers of the wild-type K665N and at least one minor Q223R allele had the greatest likelihood of losing weight (OR = 5.09, p = 0.006), an increase in sOB-R (ptrend = 0.022) and decrease in SDS-BMI correlated with the decrease of fat mass (p < 0.001). In contrast, carrying of the wild-type Q223R and at least one minor K665N allele were associated with a decrease in sOB-R concentrations and a decrease in SDS-BMI correlated with a decrease in fat-free mass (p = 0.002). We suggest that the combination of different LEPR variants, not a single variant, might determine predisposition to weight loss in the prepubertal period. PMID:27240401

  3. Efficacy and tolerability of 1- and 3-month leuprorelin acetate depot formulations (Eligard®/Depo-Eligard®) for advanced prostate cancer in daily practice: a Belgian prospective non-interventional study

    PubMed Central

    Michielsen, Dirk

    2014-01-01

    Introduction The 1-, 3- and 6- month biodegradable polymer matrix depot formulations of leuprorelin acetate (Eligard®/Depo-Eligard®, Astellas Pharma Inc/BV) were shown to reduce testosterone and prostate-specific antigen levels and to be well tolerated in patients with advanced prostate cancer in several clinical trials. This study aimed at evaluating the efficacy, safety and tolerability of the 1- and 3-month leuprorelin acetate depot formulations in daily clinical practice. Material and methods A prospective, open-label, non-interventional, phase IV study (MANTA) was conducted in 243 Belgian prostate cancer patients who had been prescribed the 1-month (7.5 mg) or 3-month (22.5 mg) leuprorelin acetate depot formulation. Patients were followed for at least 3 months. Results Median serum prostate-specific antigen levels were reduced by 95% from 12.0 ng/ml at baseline to 0.60 ng/ml after a median follow-up time of 132 days, while median testosterone levels were reduced by 94% from 360 ng/dl to 20 ng/dl. Partial or complete treatment response was observed in 83% of patients at the final visit (according to the physician's assessment). Ninety-two patients (37.86%) experienced treatment-emergent adverse events, with injection site-related reactions, hot flushes and tumor flare being the most common ones. Overall safety and tolerability of the leuprorelin acetate depot formulation were rated as good or excellent by 90% of physicians. Conclusions These data are consistent with efficacy and tolerability results from clinical trials. They confirm that the 1- and 3-month leuprorelin acetate depot formulations are well tolerated and reliably lower serum prostate-specific antigen and testosterone levels in routine clinical practice. PMID:25097577

  4. Two randomized, double-blind, placebo-controlled studies of fluticasone propionate lotion 0.05% for the treatment of atopic dermatitis in subjects from 3 months of age.

    PubMed

    Eichenfield, Lawrence F; Miller, B H

    2006-04-01

    A novel lotion formulation of fluticasone propionate 0.05% has recently become available. Two large, randomized, placebo-controlled, double-blind studies involving 438 subjects demonstrated its efficacy and safety when applied once daily in the treatment of atopic dermatitis in subjects from 3 months to 87 years of age. The studies were limited to 4 weeks duration of use of fluticasone lotion and did not assess longer term efficacy or side effects.

  5. Zinc Finger Takes on a Whole New Meaning: Reducing and Monitoring Zinc Blanks in the Isotope Lab

    NASA Astrophysics Data System (ADS)

    Wilkes, E. B.; Wasylenki, L. E.; Anbar, A. D.

    2010-12-01

    In terms of avoiding contamination, zinc is one of the most difficult elements to study isotopically. The reason for this is that zinc stearate is a very common mold release agent in the production of plastics, including those most often used in isotope geochemistry clean labs. While polyethylene bottles, polypropylene centrifuge tubes, pipette tips, and Kimwipes are all potential sources of contaminant zinc, by far the largest amount of zinc is introduced to the laboratory by gloves. Most items can be effectively rid of zinc by soaking in dilute hydrochloric acid, but gloves cannot be cleaned easily, and use of gloves can quickly lead to contamination on many surfaces throughout the lab. We recently conducted several experiments in which dissolved zinc was partly adsorbed onto synthetic Mn oxyhydroxide particles. The dissolved and adsorbed pools were separated by filtration, purified with ion exchange chemistry, and analyzed for isotope composition by MC-ICP-MS. We used a commercially purchased ICP standard solution both as our standard (delta66/64Zn = 0) and as the source of the zinc in the experiments. Whenever gloves were worn during purification, process blanks contained as much as 150 ng Zn, and both the dissolved and adsorbed pools of zinc came out enriched in heavy isotopes relative to the starting pool, contrary to our expectation of mass balance. When gloves were not worn, blanks were <10 ng, and, as expected, one pool of Zn was lighter and one heavier than the standard. Zinc leached from two different brands of vinyl gloves, including one brand recommended to us for being “low” in zinc, measured +10‰ relative to our standard. We therefore concluded that glove zinc contaminated most of our experimental samples. We were only able to see such clear evidence of contamination because (1) we were doing an experiment in which we expected one light and one heavy pool of zinc compared to our standard, and (2) we happened to use an ICP standard solution for

  6. Promoting metacognition in first year anatomy laboratories using plasticine modeling and drawing activities: a pilot study of the "blank page" technique.

    PubMed

    Naug, Helen L; Colson, Natalie J; Donner, Daniel G

    2011-01-01

    Many first year students of anatomy and physiology courses demonstrate an inability to self-regulate their learning. To help students increase their awareness of their own learning in a first year undergraduate anatomy course, we piloted an exercise that incorporated the processes of (1) active learning: drawing and plasticine modeling and (2) metacognition: planning, monitoring, reaction, and reflection. The activity was termed "blank page" because all learning cues were removed and students had to create models and diagrams from reflection and recall. Two hundred and eighty-two students responded to a questionnaire reporting qualitative feedback on the exercise. Based on student responses, the "blank page" activity was a positive learning experience and confirmed a need to teach metacognitive skills. From this pilot study, we established that drawing or plasticine modeling is an excellent vehicle for demonstration of the metacognitive processes that enable self-regulation: a known predictor of academic success. PMID:21618445

  7. Promoting metacognition in first year anatomy laboratories using plasticine modeling and drawing activities: a pilot study of the "blank page" technique.

    PubMed

    Naug, Helen L; Colson, Natalie J; Donner, Daniel G

    2011-01-01

    Many first year students of anatomy and physiology courses demonstrate an inability to self-regulate their learning. To help students increase their awareness of their own learning in a first year undergraduate anatomy course, we piloted an exercise that incorporated the processes of (1) active learning: drawing and plasticine modeling and (2) metacognition: planning, monitoring, reaction, and reflection. The activity was termed "blank page" because all learning cues were removed and students had to create models and diagrams from reflection and recall. Two hundred and eighty-two students responded to a questionnaire reporting qualitative feedback on the exercise. Based on student responses, the "blank page" activity was a positive learning experience and confirmed a need to teach metacognitive skills. From this pilot study, we established that drawing or plasticine modeling is an excellent vehicle for demonstration of the metacognitive processes that enable self-regulation: a known predictor of academic success.

  8. The Impact of Structure on Word Meaning and Fill-in-The-Blank Tests Procedures on Short-Term and Long-Term Retention of Vocabulary Items

    ERIC Educational Resources Information Center

    Fazeli, Seyed Hossein

    2009-01-01

    The purpose of research described in the current study to investigate the impact of structure knowing on two types of test, i.e. word-meaning test and fill-in-the-blank test, their correlation and procedures on both short-term and long-term retention of vocabulary items. The importance of the present study, to test the condition that learners are…

  9. Candidate isolated neutron stars and other optically blank x-ray fields identified from the rosat all-sky and sloan digital sky surveys

    SciTech Connect

    Agueros, Marcel A.; Anderson, Scott F.; Margon, Bruce; Haberl, Frank; Voges, Wolfgang; Annis, James; Schneider, Donald P.; Brinkmann, Jonathan; /Apache Point Observ.

    2005-11-01

    Only seven radio-quiet isolated neutron stars (INSs) emitting thermal X rays are known, a sample that has yet to definitively address such fundamental issues as the equation of state of degenerate neutron matter. We describe a selection algorithm based on a cross-correlation of the ROSAT All-Sky Survey (RASS) and the Sloan Digital Sky Survey (SDSS) that identifies X-ray error circles devoid of plausible optical counterparts to the SDSS g {approx} 22 magnitudes limit. We quantitatively characterize these error circles as optically blank; they may host INSs or other similarly exotic X-ray sources such as radio-quiet BL Lacs, obscured AGN, etc. Our search is an order of magnitude more selective than previous searches for optically blank RASS error circles, and excludes the 99.9% of error circles that contain more common X-ray-emitting subclasses. We find 11 candidates, nine of which are new. While our search is designed to find the best INS candidates and not to produce a complete list of INSs in the RASS, it is reassuring that our number of candidates is consistent with predictions from INS population models. Further X-ray observations will obtain pinpoint positions and determine whether these sources are entirely optically blank at g {approx} 22, supporting the presence of likely isolated neutron stars and perhaps enabling detailed follow-up studies of neutron star physics.

  10. Episodic spontaneous hypothermia: a periodic childhood syndrome.

    PubMed

    Ruiz, Cynthia; Gener, Blanca; Garaizar, Carmen; Prats, José M

    2003-04-01

    Episodic spontaneous hypothermia is an infrequent disorder, with unknown pathogenic mechanisms. A systemic cause or underlying brain lesion has not been found for the disease. We report four new patients, 3-9 years old, with episodic hypothermia lower than 35 degrees C, marked facial pallor, and absent shivering. The episodes could last a few hours or four days, and recurred once a week or every 2-3 months. Two patients also demonstrated bradycardia, mild hypertension, and somnolence during the events; in one of them, profuse sweating was also a feature, and all four presented with either headache, a periodic childhood syndrome, or both (recurrent abdominal pain, cyclic vomiting, or vertigo). Three patients reported a family history of migraine. Neurologic examination, endocrine function, and imaging studies were normal. Migraine prophylactic therapy was of moderate efficacy. Spontaneous resolution was observed in one patient. The clinical characteristics of the syndrome allow for its inclusion as a childhood periodic syndrome related to migraine. PMID:12849886

  11. A 3-Month Randomized Controlled Pilot Trial of a Patient-Centered, Computer-Based Self-Monitoring System for the Care of Type 2 Diabetes Mellitus and Hypertension.

    PubMed

    Or, Calvin; Tao, Da

    2016-04-01

    This study was performed to evaluate the effects of a patient-centered, tablet computer-based self-monitoring system for chronic disease care. A 3-month randomized controlled pilot trial was conducted to compare the use of a computer-based self-monitoring system in disease self-care (intervention group; n = 33) with a conventional self-monitoring method (control group; n = 30) in patients with type 2 diabetes mellitus and/or hypertension. The system was equipped with a 2-in-1 blood glucose and blood pressure monitor, a reminder feature, and video-based educational materials for the care of the two chronic diseases. The control patients were given only the 2-in-1 monitor for self-monitoring. The outcomes reported here included the glycated hemoglobin (HbA1c) level, fasting blood glucose level, systolic blood pressure, diastolic blood pressure, chronic disease knowledge, and frequency of self-monitoring. The data were collected at baseline and at 1-, 2-, and 3-month follow-up visits. The patients in the intervention group had a significant decrease in mean systolic blood pressure from baseline to 1 month (p < 0.001) and from baseline to 3 months (p = 0.043) compared with the control group. Significant improvements in the mean diastolic blood pressure were seen in the intervention group compared with the control group after 1 month (p < 0.001) and after 2 months (p = 0.028), but the change was not significant after 3 months. No significant differences were observed between the groups in the fasting blood glucose level, the HbA1c level, or chronic disease knowledge. The frequency of self-monitoring of blood glucose level and blood pressure was similar in both groups. The performances of the tablet computer-assisted and conventional disease self-monitoring appear to be useful to support/maintain blood pressure and diabetes control. The beneficial effects of the use of electronic self-care resources and support provided via mobile technologies require further

  12. A 3-Month Randomized Controlled Pilot Trial of a Patient-Centered, Computer-Based Self-Monitoring System for the Care of Type 2 Diabetes Mellitus and Hypertension.

    PubMed

    Or, Calvin; Tao, Da

    2016-04-01

    This study was performed to evaluate the effects of a patient-centered, tablet computer-based self-monitoring system for chronic disease care. A 3-month randomized controlled pilot trial was conducted to compare the use of a computer-based self-monitoring system in disease self-care (intervention group; n = 33) with a conventional self-monitoring method (control group; n = 30) in patients with type 2 diabetes mellitus and/or hypertension. The system was equipped with a 2-in-1 blood glucose and blood pressure monitor, a reminder feature, and video-based educational materials for the care of the two chronic diseases. The control patients were given only the 2-in-1 monitor for self-monitoring. The outcomes reported here included the glycated hemoglobin (HbA1c) level, fasting blood glucose level, systolic blood pressure, diastolic blood pressure, chronic disease knowledge, and frequency of self-monitoring. The data were collected at baseline and at 1-, 2-, and 3-month follow-up visits. The patients in the intervention group had a significant decrease in mean systolic blood pressure from baseline to 1 month (p < 0.001) and from baseline to 3 months (p = 0.043) compared with the control group. Significant improvements in the mean diastolic blood pressure were seen in the intervention group compared with the control group after 1 month (p < 0.001) and after 2 months (p = 0.028), but the change was not significant after 3 months. No significant differences were observed between the groups in the fasting blood glucose level, the HbA1c level, or chronic disease knowledge. The frequency of self-monitoring of blood glucose level and blood pressure was similar in both groups. The performances of the tablet computer-assisted and conventional disease self-monitoring appear to be useful to support/maintain blood pressure and diabetes control. The beneficial effects of the use of electronic self-care resources and support provided via mobile technologies require further

  13. Toward Radiocarbon Measurement of Individual Amino Acids in Marine Dissolved Organic Matter (DOM): Δ14C Blank Quantification for an HPLC Purification Method.

    NASA Astrophysics Data System (ADS)

    Bour, A. L.; Broek, T.; Walker, B. D.; Mccarthy, M. D.

    2014-12-01

    The presence of much of the marine dissolved organic nitrogen (DON) pool as uncharacterized, biologically recalcitrant molecules is a central mystery in the marine nitrogen cycle. Radiocarbon (Δ14C) isotopic measurements have been perhaps the most important data constraining the cycling of dissolved organic matter (DOM), but little Δ14C data specific to DON is available. Amino acids (AAs) are the major component of DON that can be isolated on a molecular level. Δ14C measurements for the operational "protein-like" fraction of DOM in the deep ocean indicate that this compound class has radiocarbon ages greater than several ocean mixing cycles, suggesting remarkable preservation of labile AAs exported from the surface. However, it is possible that the previously defined operational "protein-like" fraction may also contain non-AA material. Radiocarbon measurement of purified individual AAs would provide a more direct and reliable proxy for DON Δ14C age and cycling rate. We present here Δ14C blank characterization of an AA purification method based on HPLC, with on-line fraction collection. This method allows the recovery of unmodified AAs, but accurate measurement of small AA samples that can be extracted from DOM requires a system with extremely low Δ 14C blanks. Here we assess the impact of HPLC purification on the Δ14C age of known amino acids standards. Individual AA standards with contrasting (modern vs. dead) and well- characterized Δ14C ages were processed in a range of sample sizes. The eluted peaks were collected and dried, and measurement of their post-chromatography Δ14C content allowed for determination of the Δ14C blank by method of additions. The same protocol was applied to a mixture of six AA standards, to evaluate tailing effects in consecutive AA peaks of contrasting Δ14C age. AA standards were selected to include both Δ14C modern and dead AAs that elute both early and late in the chromatographic solvent program. We discuss implications

  14. Combination of White Blood Cell Count at Presentation With Molecular Response at 3 Months Better Predicts Deep Molecular Responses to Imatinib in Newly Diagnosed Chronic-Phase Chronic Myeloid Leukemia Patients

    PubMed Central

    Qin, Ya-Zhen; Jiang, Qian; Jiang, Hao; Lai, Yue-Yun; Zhu, Hong-Hu; Liu, Yan-Rong; Jiang, Bin; Huang, Xiao-Jun

    2016-01-01

    Abstract The aim of this study was to evaluate the impact of white blood cell (WBC) counts at presentation on the achievement of deep molecular response. A total of 362 newly diagnosed chronic-phase chronic myeloid leukemia patients (CML-CP) receiving 400 mg/day imatinib were serially monitored for a median of 36 months (range 6–115). Patients showing an optimal response at 3, 6, and 12 months as defined by the 2013 European LeukemiaNet recommendations had significantly lower WBC counts at presentation than those showing nonoptimal responses (all P < 0.0001). Among the cutoff values with a similar Youden index, 150 × 10E9/L (abbreviated WBC > 150) was selected to identify the greatest amount of patients with the potential to achieve a sustained molecular response of 4.5 (MR4.5). Regardless of whether the Sokal risk score was included, the BCR-ABLIS value at 3 months, WBC counts at presentation, hemoglobin levels, and sex were the common independent predictors for an MR4.5, with the former 2 presenting the highest hazard risk. Low Sokal risk scores did not independently predict the achievement of an MR4.5. Patients with concurrent WBC > 150 and BCR-ABLIS ≤ 10% had a similar incidence of 4-year MR4.5 compared with patients with concurrent WBC ≤ 150 and BCR-ABLIS > 10% and concurrent WBC > 150 and BCR-ABLIS > 10% (13.5% vs 13.2% vs 8.8%, P = 0.47), and all of these values were significantly lower than the values for patients with concurrent WBC ≤ 150 and BCR-ABLIS ≤ 10% (55.0%, all P < 0.0001). Patients with concurrent WBC ≤ 150 and BCR-ABLIS ≤ 10% had better 4-year event-free survival rates, progression-free survival rates, and overall survival rates compared with patients with WBC > 150 or BCR-ABLIS > 10%. The combination of WBC count at presentation and BCR-ABLIS at 3 months provides improved predictions of deep molecular response in imatinib-treated CML-CP patients. Therefore, the WBC count at presentation might be used to

  15. Familial Periodic Paralyses

    MedlinePlus

    ... NINDS NINDS Familial Periodic Paralyses Information Page Synonym(s): Periodic Paralyses Table of Contents (click to jump to sections) What are Familial Periodic Paralyses? Is there any treatment? What is the ...

  16. Happy crisis tests hospitals' PR plan. Septuplets' arrival swamps Iowa hospitals with national, international media. Blank Children's Hospital, Iowa Methodist Medical Center, Des Moines.

    PubMed

    1998-01-01

    The public relations staff believed the birth of healthy septuplets would become a human interest story for local media. But the staff was stunned at the outpouring of international and national media knocking at their front doors. The staff of both Iowa Methodist Medical Center and Blank Children's Hospital in Des Moines, Iowa, organized a communications plan for 14 official press conferences, constant updates to the media and a website to handle ongoing inquiries from the public. As a result, the story of the McCaughey septuplets was shown in more than 10,000 television stories around the world. The hospitals received more than 36,000 magazine and newspaper articles. The public relations staff not only fielded more than 2,000 phone calls in the days following the Nov. 19 birth, but more than 15 major networks parked their vehicles and satellite dishes in front of the hospital.

  17. Is it safe? Talking to teens with HIV/AIDS about death and dying: a 3-month evaluation of Family Centered Advance Care (FACE) planning – anxiety, depression, quality of life

    PubMed Central

    Lyon, Maureen E; Garvie, Patricia A; Briggs, Linda; He, Jianping; Malow, Robert; D’Angelo, Lawrence J; McCarter, Robert

    2010-01-01

    Purpose To determine the safety of engaging HIV-positive (HIV+) adolescents in a Family Centered Advance Care (FACE) planning intervention. Patients and methods We conducted a 2-armed, randomized controlled clinical trial in 2 hospital-based outpatient clinics from 2006–2008 with HIV+ adolescents and their surrogates (n = 76). Three 60–90 minutes sessions were conducted weekly. FACE intervention groups received: Lyon FCACP Survey©, the Respecting Choices® interview, and completion of The Five Wishes©. The Healthy Living Control (HLC) received: Developmental History, Healthy Tips, Future Planning (vocational, school or vocational rehabilitation). Three-month post-intervention outcomes were: completion of advance directive (Five Wishes©); psychological adjustment (Beck Depression, Anxiety Inventories); quality of life (PedsQL™); and HIV symptoms (General Health Self-Assessment). Results Adolescents had a mean age, 16 years; 40% male; 92% African-American; 68% with perinatally acquired HIV, 29% had AIDS diagnosis. FACE participants completed advance directives more than controls, using time matched comparison (P < 0.001). Neither anxiety, nor depression, increased at clinically or statistically significant levels post-intervention. FACE adolescents maintained quality of life. FACE families perceived their adolescents as worsening in their school (P = 0.018) and emotional (P = 0.029) quality of life at 3 months, compared with controls. Conclusions Participating in advance care planning did not unduly distress HIV+ adolescents. PMID:22096382

  18. Investigating Long-Range Dependence in American Treasury Bills Variations and Volatilities during Stable and Unstable Periods

    NASA Astrophysics Data System (ADS)

    Lahmiri, Salim

    2016-05-01

    Detrended fluctuation analysis (DFA) is used to examine long-range dependence in variations and volatilities of American treasury bills (TB) during periods of low and high movements in TB rates. Volatility series are estimated by generalized autoregressive conditional heteroskedasticity (GARCH) model under Gaussian, Student, and the generalized error distribution (GED) assumptions. The DFA-based Hurst exponents from 3-month, 6-month, and 1-year TB data indicates that in general the dynamics of the TB variations process is characterized by persistence during stable time period (before 2008 international financial crisis) and anti-persistence during unstable time period (post-2008 international financial crisis). For volatility series, it is found that; for stable period; 3-month volatility process is more likely random, 6-month volatility process is anti-persistent, and 1-year volatility process is persistent. For unstable period, estimation results show that the generating process is persistent for all maturities and for all distributional assumptions.

  19. PRINCE-1: safety and efficacy of atazanavir powder and ritonavir liquid in HIV-1-infected antiretroviral-naïve and -experienced infants and children aged ≥3 months to <6 years

    PubMed Central

    Strehlau, Renate; Donati, Anamaria Pena; Arce, Pedro Martinez; Lissens, Jurgen; Yang, Rong; Biguenet, Sophie; Cambilargiu, Daniela; Hardy, Hélène; Correll, Todd

    2015-01-01

    Introduction PRINCE-1 is an ongoing prospective, international, multicentre, nonrandomized, two-stage clinical trial assessing safety and efficacy of once-daily atazanavir (ATV) powder boosted with ritonavir (RTV) liquid plus optimized dual nucleoside reverse-transcriptase inhibitor (NRTI) background therapy in antiretroviral (ARV)-naïve and -experienced children with HIV-1 infection aged ≥3 months to <6 years. Methods Children with HIV-1 infection without prior ATV exposure and with a screening HIV-1 RNA ≥1000 copies/mL were enrolled. The dosing of ATV powder, boosted with 80 mg RTV liquid, was based on three baseline weight bands (5 to <10 kg=150 mg, 10 to <15 kg=200 mg and 15 to <25 kg=250 mg). Results Of the 56 treated patients, 46 completed 48 weeks of therapy, 67.9% were from Africa and 60.7% were ART-naïve. Median ages at baseline were 6, 35 and 55 months, and proportions with HIV-1 RNA >100,000 were 85.7, 52.6 and 25% in the three baseline weight bands, respectively. No unexpected safety events occurred and no deaths were reported. Over 48 weeks, upper respiratory tract infections, diarrhoea, vomiting and Grade 3 to 4 hyperbilirubinaemia occurred in 35.7, 35.7, 28.6, and 9.4% of patients, respectively; five patients (8.9%) discontinued due to adverse events (AEs); and 11 patients (19.6%) experienced serious adverse events. At Week 48, using a modified intent-to-treat analysis (two patients were excluded because they switched to ATV capsules before Week 48), 61.1 and 74.1% of patients overall had an HIV-1 RNA level <50 copies/mL and <400 copies/mL, respectively. Virologic suppression rates increased across the lowest to highest baseline weight bands (47.6, 68.4 and 71.4% had HIV-1 RNA <50 copies/mL, and 66.7, 73.7 and 85.7% had HIV-RNA <400 copies/mL, respectively) but did not differ meaningfully between ARV-naïve and -experienced patients. Overall, the median change from baseline in CD4 cell count was +363 cells/mm3, and the median change from

  20. Period meter for reactors

    DOEpatents

    Rusch, Gordon K.

    1976-01-06

    An improved log N amplifier type nuclear reactor period meter with reduced probability for noise-induced scrams is provided. With the reactor at low power levels a sampling circuit is provided to determine the reactor period by measuring the finite change in the amplitude of the log N amplifier output signal for a predetermined time period, while at high power levels, differentiation of the log N amplifier output signal provides an additional measure of the reactor period.

  1. The Periodic Pyramid

    ERIC Educational Resources Information Center

    Hennigan, Jennifer N.; Grubbs, W. Tandy

    2013-01-01

    The chemical elements present in the modern periodic table are arranged in terms of atomic numbers and chemical periodicity. Periodicity arises from quantum mechanical limitations on how many electrons can occupy various shells and subshells of an atom. The shell model of the atom predicts that a maximum of 2, 8, 18, and 32 electrons can occupy…

  2. Analysis and design of triple-band high-impedance surface absorber with periodic diversified impedance

    NASA Astrophysics Data System (ADS)

    Rui Zhang, Guo; Heng Zhou, Pei; Bin Zhang, Hui; Bo Zhang, Lin; Liang Xie, Jian; Jiang Deng, Long

    2013-10-01

    In this paper, a triple-band planar absorber with high-impedance surface (HIS) is designed and fabricated. The absorber structure is composed of polyurethane foam sandwiched between a lossy sheet of frequency selective surfaces (FSS) and a perfect electric conductor. The lossy FSS possesses different resistances in a periodic composite unit as compared with typical HIS absorber. Losses in the FSS are introduced by printing the periodic composite square ring pattern on blank stickers using various resistive inks. Physical mechanism of the HIS absorbers is analyzed by equivalent circuit model and electric field distribution studies. The proposed absorber with periodic composite units offers superimposed triple-band absorption as compared with that of the single units having single- or dual-band absorption characteristics. The reflection loss measurements show that the 90% absorption bandwidth of the HIS absorber is increased by 42% by the proposed composite periodic units.

  3. The criterion for blanking-off heat-transfer tubes in the steam generators at VVER-based nuclear power plants based on the results of eddy-current examination

    NASA Astrophysics Data System (ADS)

    Lunin, V. P.; Zhdanov, A. G.; Chegodaev, V. V.; Stolyarov, A. A.

    2015-05-01

    The problem of defining the criterion for blanking off heat-transfer tubes in the steam generators at nuclear power plants on the basis of signals obtained from the standard multifrequency eddy-current examination is considered. The decision about blanking off one or another tube is presently made with reference to one parameter of the relevant signal at the working frequency, namely, with reference to its phase, which directly depends on the depth of the flaw being detected, i.e., a crack in the tube. The crack depth equal to 60% of the tube wall thickness is regarded to be the critical one, at which a decision about withdrawing such a tube out from operation (blanking off) must be taken. However, since mechanical tensile rupture tests of heat-transfer tubes show the possibility of their further use with such flaws, the secondary parameter of the signal, namely, its amplitude, must be used for determining the blanking-off criterion. The signals produced by the standard flow-type transducers in response to flaws in the form of a longitudinal crack having the depth and length within the limits permitted by the relevant regulations were calculated using 3D finite-element modeling. Based on the obtained results, the values of the eddy-current signal amplitude were determined, which, together with the signal phase value, form a new amplitude-phase criterion for blanking off heat-transfer tubes. For confirming the effectiveness of this technique, the algorithm for revealing the signal indications satisfying the proposed amplitude-phase criterion was tested on real signals obtained from operational eddy-current examination of the state of steam generator heat-transfer tubes carried out within the framework of planned preventive repair.

  4. Solution for blank and matrix difficulties encountered during phthalate analysis of edible oils by high performance liquid chromatography coupled with tandem mass spectrometry.

    PubMed

    Vavrouš, Adam; Pavloušková, Jana; Ševčík, Václav; Vrbík, Karel; Čabala, Radomír

    2016-07-22

    Worldwide production of phthalates has led to their undesirable presence in the food chain. Particularly edible oils have become an area of growing concern owing to numerous reported occurrences of phthalates. The analytical methods used in this field face difficulties associated mainly with matrix complexity or phthalate contamination which this study has aimed to describe and resolve. The proposed procedure consisting of liquid-liquid extraction, solid phase extraction and high performance liquid chromatography coupled with tandem mass spectrometry allowed us to analyze simultaneously 6 individual phthalates and 2 phthalate isomeric mixtures. DSC-18 SPE phase was selected for cleanup owing to the most efficient co-extract removal (assessed using high resolution mass spectrometry). Several sources of phthalate contamination were identified, however, the mobile phase was the most serious. The key improvement was achieved by equipping a contamination trap, a 50-mm reverse phase HPLC column, generating a delay between target and mobile phase peaks of the same compounds. RSDs ranging between 2.4 and 16 % confirm good precision and LOQs between 5.5 and 110μgkg(-1) reflect satisfactory blank management. With up to 19 occurrences in 25 analyzed edible oil samples and levels up to 33mgkg(-1), bis(2-ethylhexyl), diisononyl and diisodecyl phthalates were the most important contaminants. PMID:27318508

  5. [Scientific periodicals: quality criteria].

    PubMed

    Ferreira, Maria Cecilia Gonzaga; Krzyzanowski, Rosaly Favero

    2003-05-01

    This paper presents a historical literature review on the evaluation of periodicals and the methodology employed for their evaluation. It emphasizes the attention that should be given to the contents of the periodicals and their format based on technical standards in order to reach a global quality of the publications. This paper includes a summary of the most important aspects of the technical standards for periodicals and scientific articles.

  6. Hospital inquiries. The listening blank.

    PubMed

    Higgins, J

    2001-09-13

    The major failures reported in the Bristol inquiry have been highlighted in most hospital inquiry reports over the past 30 years. The tendency to victimise the whistleblower has characterised virtually all inquiries. Inadequate leadership, isolation, system failures, poor communication and disempowerment of staff and service users are the common themes. While organisational reform is essential, the real challenge is to change behaviour. And this depends on the example of senior staff.

  7. Saturn's variable radio period

    NASA Astrophysics Data System (ADS)

    Kurth, W. S.; Lecacheux, A.; Zarka, P.; Gurnett, D. A.; Cecconi, B.

    Temporal modulations in radio emissions are often used to determine the rotation rate of the emitting body. The rotation period (presumably) of Jupiter's interior was established in this way [Burke et al., 1962] and has recently been refined by Higgins et al. [1997]. Rotation periods for the remainder of the outer planet gas giants were determined from Voyager planetary radio astronomy observations. Similar techniques have been applied to astrophysical objects, including pulsars, for which the radio period is assumed to be the rotation period of the neutron star. In 2001, however, this simple relation between the radio period and rotation period became suspect, at least for the case of Saturn. Galopeau and Lecacheux [2001] reported that the radio period of Saturn had changed by as much as 1% from that determined by Voyager and, further, exhibited variations on time scales of years. More recently, Cassini observations indicate that the Saturn kilometric radiation is modulated with a period longer than that observed by Voyager and that this period is variable on a time scale of a year or less. The recent Higgins et al. result suggests that Jupiter's period is steady, within measurement accuracy. There are no additional measurements from Uranus or Neptune with which to look for time variations in their radio periods. For conservation of energy and angular momentum reasons, true variations of the rotation period of Saturn's deep interior are not believed to be a viable explanation for the variation in radio period, hence, it would appear that there is some disconnection of the radio period from the rotation period in the case of Saturn. One possible contributing factor may be that since Saturn's magnetic field is very accurately aligned with its rotational axis, there is no first-order beaming effect caused by the wobbling of the magnetic field, contrary to the situation at the other magnetized planets. Another explanation suggested by Galopeau and Lecacheux [2001] and

  8. Sequences close to periodic

    NASA Astrophysics Data System (ADS)

    Muchnik, Andrei A.; Pritykin, Yurii L.; Semenov, Aleksei L.

    2009-10-01

    This paper is a survey of concepts and results connected with generalizations of the notion of a periodic sequence, both classical and new. The topics discussed relate to almost periodicity in such areas as combinatorics on words, symbolic dynamics, expressibility in logical theories, computability, Kolmogorov complexity, and number theory. Bibliography: 124 titles.

  9. Multidimensional period doubling structures.

    PubMed

    Lee, Jeong Yup; Flom, Dvir; Ben-Abraham, Shelomo I

    2016-05-01

    This paper develops the formalism necessary to generalize the period doubling sequence to arbitrary dimension by straightforward extension of the substitution and recursion rules. It is shown that the period doubling structures of arbitrary dimension are pure point diffractive. The symmetries of the structures are pointed out. PMID:27126116

  10. The Living Periodic Table

    ERIC Educational Resources Information Center

    Nahlik, Mary Schrodt

    2005-01-01

    To help make the abstract world of chemistry more concrete eighth-grade students, the author has them create a living periodic table that can be displayed in the classroom or hallway. This display includes information about the elements arranged in the traditional periodic table format, but also includes visual real-world representations of the…

  11. Periodically poled silicon

    NASA Astrophysics Data System (ADS)

    Hon, Nick K.; Tsia, Kevin K.; Solli, Daniel R.; Jalali, Bahram

    2009-03-01

    We propose a new class of photonic devices based on periodic stress fields in silicon that enable second-order nonlinearity as well as quasi-phase matching. Periodically poled silicon (PePSi) adds the periodic poling capability to silicon photonics and allows the excellent crystal quality and advanced manufacturing capabilities of silicon to be harnessed for devices based on second-order nonlinear effects. As an example of the utility of the PePSi technology, we present simulations showing that midwave infrared radiation can be efficiently generated through difference frequency generation from near-infrared with a conversion efficiency of 50%.

  12. Genealogy of periodic trajectories

    SciTech Connect

    de Adguiar, M.A.M.; Maldta, C.P.; de Passos, E.J.V.

    1986-05-20

    The periodic solutions of non-integrable classical Hamiltonian systems with two degrees of freedom are numerically investigated. Curves of periodic families are given in plots of energy vs. period. Results are presented for this Hamiltonian: H = 1/2(p/sub x//sup 2/ + p/sub y//sup 2/) + 1/2 x/sup 2/ + 3/2 y/sup 2/ - x/sup 2/y + 1/12 x/sup 4/. Properties of the families of curves are pointed out. (LEW)

  13. Periodized Daubechies wavelets

    SciTech Connect

    Restrepo, J.M.; Leaf, G.K.; Schlossnagle, G.

    1996-03-01

    The properties of periodized Daubechies wavelets on [0,1] are detailed and counterparts which form a basis for L{sup 2}(R). Numerical examples illustrate the analytical estimates for convergence and demonstrated by comparison with Fourier spectral methods the superiority of wavelet projection methods for approximations. The analytical solution to inner products of periodized wavelets and their derivatives, which are known as connection coefficients, is presented, and their use ius illustrated in the approximation of two commonly used differential operators. The periodization of the connection coefficients in Galerkin schemes is presented in detail.

  14. On the construction of a 2-metre mirror blank for the universal reflecting telescope in Tautenburg (German Title: Über die Fertigung eines 2-Meter-Spiegelträgers für das Universal-Spiegelteleskop in Tautenburg )

    NASA Astrophysics Data System (ADS)

    Lödel, Wolfgang

    The astronomers' desire to penetrate deeper into space transforms into a demand for larger telescopes. The primary mirror constitutes the main part of a reflecting telescope, and it determines all subsequent activities. Already in the 1930s activities existed in the Schott company to manufacture mirror blanks up to diameters of 2 metres, which could not be pursued because of political constraints. This ambitious goal was again picked up a few years after the war. At a time when the procurement of raw materials was extremely difficult, the glass workers of Schott in Jena attacked this large project. After some failures, a good mirror blank could be delivered to the Carl Zeiss Company in 1951 for further processing and for the construction of the first 2-metre reflecting telescope. From 1960 to 1986, this mirror made from optical glass ZK7 served its purpose at the Karl Schwarzschild Observatory in Tautenburg. lt was then replaced by a zero expansion glass ceramics mirror.

  15. Your First Period

    MedlinePlus

    ... severe asthma). Always follow the directions on the bottle about how much to take. Exercise. Place a ... days. Glossary Amenorrhea: The absence of menstrual periods. Egg: The female reproductive cell produced in and released ...

  16. The Periodic Table CD.

    ERIC Educational Resources Information Center

    Banks, Alton J.; Holmes, Jon L.

    1995-01-01

    Describes the characteristics of the digitized version of The Periodic Table Videodisc. Provides details about the organization of information and access to the data via Macintosh and Windows computers. (DDR)

  17. Setting the Periodic Table.

    ERIC Educational Resources Information Center

    Saturnelli, Annette

    1985-01-01

    Examines problems resulting from different forms of the periodic table, indicating that New York State schools use a form reflecting the International Union of Pure and Applied Chemistry's 1984 recommendations. Other formats used and reasons for standardization are discussed. (DH)

  18. Thyrotoxic periodic paralysis

    MedlinePlus

    ... high levels of thyroid hormone in their blood ( hyperthyroidism , thyrotoxicosis). Causes This is a rare condition that ... include a family history of periodic paralysis and hyperthyroidism. Symptoms Symptoms involve attacks of muscle weakness or ...

  19. 24 CFR 203.266 - Period covered by periodic MIP.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 24 Housing and Urban Development 2 2011-04-01 2011-04-01 false Period covered by periodic MIP. 203.266 Section 203.266 Housing and Urban Development Regulations Relating to Housing and Urban...-Periodic Payment § 203.266 Period covered by periodic MIP. The initial MIP shall cover the period...

  20. 24 CFR 203.266 - Period covered by periodic MIP.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 24 Housing and Urban Development 2 2013-04-01 2013-04-01 false Period covered by periodic MIP. 203.266 Section 203.266 Housing and Urban Development Regulations Relating to Housing and Urban...-Periodic Payment § 203.266 Period covered by periodic MIP. The initial MIP shall cover the period...

  1. 24 CFR 203.266 - Period covered by periodic MIP.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 24 Housing and Urban Development 2 2014-04-01 2014-04-01 false Period covered by periodic MIP. 203.266 Section 203.266 Housing and Urban Development Regulations Relating to Housing and Urban...-Periodic Payment § 203.266 Period covered by periodic MIP. The initial MIP shall cover the period...

  2. 24 CFR 203.266 - Period covered by periodic MIP.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 24 Housing and Urban Development 2 2012-04-01 2012-04-01 false Period covered by periodic MIP. 203.266 Section 203.266 Housing and Urban Development Regulations Relating to Housing and Urban...-Periodic Payment § 203.266 Period covered by periodic MIP. The initial MIP shall cover the period...

  3. 24 CFR 203.266 - Period covered by periodic MIP.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 24 Housing and Urban Development 2 2010-04-01 2010-04-01 false Period covered by periodic MIP. 203.266 Section 203.266 Housing and Urban Development Regulations Relating to Housing and Urban...-Periodic Payment § 203.266 Period covered by periodic MIP. The initial MIP shall cover the period...

  4. Hyperthyroid hypokalemic periodic paralysis.

    PubMed

    Neki, N S

    2016-01-01

    Hyperthyroid periodic paralysis (HPP) is a rare life threatening complication of hyperthyroidism commonly occurring in young Asian males but sporadically found in other races. It is characterised by hypokalemia and acute onset paraparesis with prevalence of one in one hundred thousand (1 in 100000). The symptoms resolve promptly with potassium supplementation. Nonselective beta blockers like propranol can also be used to ameliorate and prevent subsequent paralytic attack. We report a case of 22 year old male presenting with hyperthyroid periodic paralysis (HPP) having very low serum potassium level. PMID:27648066

  5. Periodically kicked turbulence

    PubMed

    Lohse

    2000-10-01

    Periodically kicked turbulence is theoretically analyzed within a mean-field theory. For large enough kicking strength A and kicking frequency f the Reynolds number grows exponentially and then runs into some saturation. The saturation level Re(sat) can be calculated analytically; different regimes can be observed. For large enough Re we find Re(sat) approximately Af, but intermittency can modify this scaling law. We suggest an experimental realization of periodically kicked turbulence to study the different regimes we theoretically predict and thus to better understand the effect of forcing on fully developed turbulence. PMID:11089041

  6. Hyperthyroid hypokalemic periodic paralysis

    PubMed Central

    Neki, N.S.

    2016-01-01

    Hyperthyroid periodic paralysis (HPP) is a rare life threatening complication of hyperthyroidism commonly occurring in young Asian males but sporadically found in other races. It is characterised by hypokalemia and acute onset paraparesis with prevalence of one in one hundred thousand (1 in 100000). The symptoms resolve promptly with potassium supplementation. Nonselective beta blockers like propranol can also be used to ameliorate and prevent subsequent paralytic attack. We report a case of 22 year old male presenting with hyperthyroid periodic paralysis (HPP) having very low serum potassium level. PMID:27648066

  7. Spontaneous periodic hypothermia.

    PubMed

    Kloos, R T

    1995-09-01

    Spontaneous periodic hypothermia is a rare syndrome of recurrent, centrally mediated hypothermia without an identifiable systemic cause or brain lesion. Most patients defend a temporarily lowered temperature "set point" during episodes of hypothermia, despite manifesting many well-known systemic consequences of core temperature hypothermia. No case of death directly attributable to an episode of spontaneous periodic hypothermia has been reported, although many of the serious systemic effects of hypothermia have been documented in these cases, so it is not unlikely that death may occur. The syndrome's cause, and that of Shapiro syndrome, remains unknown. Pharmacologic trials to date have been only modestly successful. Anticonvulsant agents, clonidine, and cyproheptadine appear the most likely to succeed, with cyproheptadine being a reasonable first choice. Given that the term "spontaneous periodic hypothermia" describes a syndrome, and not a pathophysiologic mechanism, it is likely to encompass a common eventuality, arrived at via several different pathways. One can postulate mechanisms such as structural abnormalities, trauma, infection, irritation, and degeneration involving strategic locations which create a focus for epileptic or other periodic dysfunction whose scope involves the centers for thermoregulation. The existence of 2 distinct, oppositional thermoregulatory centers would allow for speculation of similar mechanisms accounting for cases of both periodic hypo- and hyperthermia (61). Postmortem data regarding the hypothalamic and surrounding areas from future cases of Shapiro syndrome and spontaneous periodic hypothermia would be of great interest. Further, more sensitive in vivo testing methods are clearly needed. The role of PET or single photon emission computed tomography (SPECT) with technetium 99m-labeled hexamethylpropylene amine oxime (Tc 99m HMPAO) performed acutely during an episode remains to be characterized (64, 103, 105). The term

  8. Weldability of Advanced High Strength Steels using Ytterbium:Yttrium Aluminium Garnet high power laser for Tailor-Welded Blank applications

    NASA Astrophysics Data System (ADS)

    Sharma, Rajashekhar Shivaram

    Use of a high power Yb:YAG laser is investigated for joining advanced high strength steel materials for use in tailor-welded blank (TWB) applications. TWB's are materials of different chemistry, coating or thicknesses that are joined before metal forming and other operations such as trimming, assembly and painting are carried out. TWB is becoming an important design tool in the automotive industry for reducing weight, improving fuel economy and passenger safety, while reducing the overall costs for the customer. Three advanced high strength steels, TRIP780, DP980 and USIBOR, which have many unique properties that are conducive to achieving these objectives, along with mild steel, are used in this work. The objective of this work is to ensure that high quality welds can be obtained using Yb:YAG lasers which are also becoming popular for metal joining operations, since they produce high quality laser beams that suffer minimal distortion when transported via fiber optic cables. Various power levels and speeds for the laser beam were used during the investigation. Argon gas was consistently used for shielding purposes during the welding process. After the samples were welded, metallographic examination of the fusion and heat-affected zones using optical and scanning electron microscopes were carried out to determine the microstructures as well as weld defects. Optical and scanning electron microscopes were also used to examine the top of welds as well as fracture surfaces. Additionally, cross-weld microhardness evaluations, tensile tests using Instron tester, limited fatigue tests as well as formability evaluations using OSU plane strain evaluation were carried out. The examinations included a 2-factor full factorial design of experiments to determine the impact of coatings on the surface roughness on the top of the welds. Tensile strengths of DP980, TRIP780 and mild steel materials as well as DP980 welded to TRIP780 and mild steel in the rolling direction as well as

  9. Periodically poled silicon

    NASA Astrophysics Data System (ADS)

    Hon, Nick K.; Tsia, Kevin K.; Solli, Daniel R.; Khurgin, Jacob B.; Jalali, Bahram

    2010-02-01

    Bulk centrosymmetric silicon lacks second-order optical nonlinearity χ(2) - a foundational component of nonlinear optics. Here, we propose a new class of photonic device which enables χ(2) as well as quasi-phase matching based on periodic stress fields in silicon - periodically-poled silicon (PePSi). This concept adds the periodic poling capability to silicon photonics, and allows the excellent crystal quality and advanced manufacturing capabilities of silicon to be harnessed for devices based on χ(2)) effects. The concept can also be simply achieved by having periodic arrangement of stressed thin films along a silicon waveguide. As an example of the utility, we present simulations showing that mid-wave infrared radiation can be efficiently generated through difference frequency generation from near-infrared with a conversion efficiency of 50% based on χ(2) values measurements for strained silicon reported in the literature [Jacobson et al. Nature 441, 199 (2006)]. The use of PePSi for frequency conversion can also be extended to terahertz generation. With integrated piezoelectric material, dynamically control of χ(2)nonlinearity in PePSi waveguide may also be achieved. The successful realization of PePSi based devices depends on the strength of the stress induced χ(2) in silicon. Presently, there exists a significant discrepancy in the literature between the theoretical and experimentally measured values. We present a simple theoretical model that produces result consistent with prior theoretical works and use this model to identify possible reasons for this discrepancy.

  10. Scheduling: Seven Period Day

    ERIC Educational Resources Information Center

    Williamson, Ronald

    2010-01-01

    Driven by stable or declining financial resources many school districts are considering the costs and benefits of a seven-period day. While there is limited evidence that any particular scheduling model has a greater impact on student learning than any other, it is clear that the school schedule is a tool that can significantly impact teacher…

  11. Periodic Table of Students.

    ERIC Educational Resources Information Center

    Johnson, Mike

    1998-01-01

    Presents an exercise in which an eighth-grade science teacher decorated the classroom with a periodic table of students. Student photographs were arranged according to similarities into vertical columns. Students were each assigned an atomic number according to their placement in the table. The table is then used to teach students about…

  12. A Modern Periodic Table.

    ERIC Educational Resources Information Center

    Herrenden-Harker, B. D.

    1997-01-01

    Presents a modern Periodic Table based on the electron distribution in the outermost shell and the order of filling of the sublevels within the shells. Enables a student to read off directly the electronic configuration of the element and the order in which filling occurs. (JRH)

  13. Getting Your Period

    MedlinePlus

    ... for a woman to have a baby. During sexual intercourse, the egg can get fertilized by a male’s sperm and then attach to the lining of the uterus ( endometrium ) and grow into a baby. ( Read more about reproduction. ) Does your period come each month? top Menstrual ...

  14. Astrophysical implications of periodicity

    NASA Technical Reports Server (NTRS)

    Muller, Richard A.

    1988-01-01

    Two remarkable discoveries of the last decade have profound implications for astrophysics and for geophysics. These are the discovery by Alvarez et al., that certain mass extinctions are caused by the impact on the earth of a large asteroid or comet, and the discovery by Raup and Sepkoski that such extinctions are periodic, with a cycle time of 26 to 30 million years. The validity of both of these discoveries is assumed and the implications are examined. Most of the phenomena described depend not on periodicity, but just on the weaker assumption that the impacts on the earth take place primarily in showers. Proposed explanations for the periodicity include galactic oscillations, the Planet X model, and the possibility of Nemesis, a solar companion star. These hypotheses are critically examined. Results of the search for the solar companion are reported. The Deccan flood basalts of India have been proposed as the impact site for the Cretaceous impact, but this hypotheisis is in contradiction with the conclusion of Courtillot et al., that the magma flow began during a period of normal magnetic field. A possible resolution of this contradiction is proposed.

  15. Cells anticipate periodic events

    NASA Astrophysics Data System (ADS)

    Nakagaki, Toshiyuki

    2009-03-01

    We show that an amoeboid organism can anticipate the timing of periodic events. The plasmodium of the true slime mold Physarum polycephalum moves rapidly under favourable conditions, but stops moving when transferred to less-favourable conditions. Plasmodia exposed to unfavourable conditions, presented in three consecutive pulses at constant intervals, reduced their locomotive speed in response to each episode. When subsequently subjected to favourable conditions, the plasmodia spontaneously reduced their locomotive speed at the time point when the next unfavourable episode would have occurred. This implied anticipation of impending environmental change. After this behaviour had been evoked several times, the locomotion of the plasmodia returned to normal; however, the anticipatory response could subsequently be induced by a single unfavourable pulse, implying recall of the memorized periodicity. We explored the mechanisms underlying these behaviours from a dynamical systems perspective. Our results hint at the cellular origins of primitive intelligence and imply that simple dynamics might be sufficient to explain its emergence.

  16. Thyrotoxic periodic paralysis

    SciTech Connect

    Ferreiro, J.E.; Arguelles, D.J.; Rams, H. Jr.

    1986-01-01

    A case of thyrotoxic periodic paralysis is reported in a Hispanic man with an unusual recurrence six weeks after radioactive iodine treatment. Thyrotoxic periodic paralysis has now been well characterized in the literature: it occurs primarily in Orientals with an overwhelming male preponderance and a higher association of specific HLA antigens. Clinical manifestations include onset after high carbohydrate ingestion or heavy exertion, with progressive symmetric weakness leading to flaccid paralysis of the extremities and other muscle groups, lasting several hours. If hypokalemia is present, potassium administration may help abort the attack. Although propranolol can be efficacious in preventing further episodes, the only definitive treatment is establishing a euthyroid state. The pathophysiology is still controversial, but reflects altered potassium and calcium dynamics as well as certain morphologic characteristics within the muscle unit itself.

  17. Periodic minimal surfaces

    NASA Astrophysics Data System (ADS)

    Mackay, Alan L.

    1985-04-01

    A minimal surface is one for which, like a soap film with the same pressure on each side, the mean curvature is zero and, thus, is one where the two principal curvatures are equal and opposite at every point. For every closed circuit in the surface, the area is a minimum. Schwarz1 and Neovius2 showed that elements of such surfaces could be put together to give surfaces periodic in three dimensions. These periodic minimal surfaces are geometrical invariants, as are the regular polyhedra, but the former are curved. Minimal surfaces are appropriate for the description of various structures where internal surfaces are prominent and seek to adopt a minimum area or a zero mean curvature subject to their topology; thus they merit more complete numerical characterization. There seem to be at least 18 such surfaces3, with various symmetries and topologies, related to the crystallographic space groups. Recently, glyceryl mono-oleate (GMO) was shown by Longley and McIntosh4 to take the shape of the F-surface. The structure postulated is shown here to be in good agreement with an analysis of the fundamental geometry of periodic minimal surfaces.

  18. Attention Reorients Periodically.

    PubMed

    Dugué, Laura; Roberts, Mariel; Carrasco, Marisa

    2016-06-20

    Reorienting of voluntary attention enables the processing of stimuli at previously unattended locations. Although studies have identified a ventral fronto-parietal network underlying attention [1, 2], little is known about whether and how early visual areas are involved in involuntary [3, 4] and even less in voluntary [5] reorienting, and their temporal dynamics are unknown. We used transcranial magnetic stimulation (TMS) over the occipital cortex to interfere with attentional reorienting and study its role and temporal dynamics in this process. Human observers performed an orientation discrimination task, with either valid or invalid attention cueing, across a range of stimulus contrasts. Valid cueing induced a behavioral response gain increase, higher asymptotic performance for attended than unattended locations. During subsequent TMS sessions, observers performed the same task, with high stimulus contrast. Based on phosphene mapping, TMS double pulses were applied at one of various delays to a consistent brain location in retinotopic areas (V1/V2), corresponding to the evoked signal of the target or distractor, in a valid or invalid trial. Thus, the stimulation was identical for the four experimental conditions (valid/invalid cue condition × target/distractor-stimulated). TMS modulation of the target and distractor were both periodic (5 Hz, theta) and out of phase with respect to each other in invalid trials only, when attention had to be disengaged from the distractor and reoriented to the target location. Reorientation of voluntary attention periodically involves V1/V2 at the theta frequency. These results suggest that TMS probes theta phase-reset by attentional reorienting and help link periodic sampling in time and attention reorienting in space.

  19. Controls on geyser periodicity.

    PubMed

    Ingebritsen, S E; Rojstaczer, S A

    1993-11-01

    Geyser eruption frequency is not constant over time and has been shown to vary with small (periodicity. Much of the responsiveness to remote seismicity and other small strains in the Earth can be explained in terms of variations in permeability and lateral recharge rates.

  20. Controls on geyser periodicity

    USGS Publications Warehouse

    Ingebritsen, S.E.; Rojstaczer, S.A.

    1993-01-01

    Geyser eruption frequency is not constant over time and has been shown to vary with small (???10-6) strains induced by seismic events, atmospheric loading, and Earth tides. The geyser system is approximated as a permeable conduit of intensely fractured rock surrounded by a less permeable rock matrix. Numerical simulation of this conceptual model yields a set of parameters that controls geyser existence and periodicity. Much of the responsiveness to remote seismicity and other small strains in the Earth can be explained in terms of variations in permeability and lateral recharge rates.

  1. Controls on geyser periodicity.

    PubMed

    Ingebritsen, S E; Rojstaczer, S A

    1993-11-01

    Geyser eruption frequency is not constant over time and has been shown to vary with small (periodicity. Much of the responsiveness to remote seismicity and other small strains in the Earth can be explained in terms of variations in permeability and lateral recharge rates. PMID:17757358

  2. The postanesthetic period. Complications.

    PubMed

    Malamed, S F

    1987-01-01

    Postanesthetic complications can occur even in the best of circumstances. Proper preparation of the staff, aggressive monitoring of the recovering patient, and early recognition and management of the complications are essential if the outcome is to be successful. In reviewing postanesthetic complications, two factors are present in the overwhelming majority of situations--hypoxia and hypercarbia--often the direct result of inadequate monitoring during the postanesthetic period. The anesthetic procedure is not over once the anesthetic agents are discontinued. The skillful anesthetist is aware of the possibilities of postoperative complications and prevents problems by employing enhanced monitoring techniques during the recovery phase.

  3. Intermittent ambiguous stimuli: Implicit memory causes periodic perceptual alternations

    PubMed Central

    Brascamp, J. W.; Pearson, J.; Blake, R.; van den Berg, A. V.

    2009-01-01

    When viewing a stimulus that has multiple plausible real-world interpretations, perception alternates between these interpretations every few seconds. Alternations can be halted by intermittently removing the stimulus from view. The same interpretation dominates over many successive presentations, and perception stabilizes. Here we study perception during long sessions of such intermittent presentation. We demonstrate that, rather than causing truly stable perception, intermittent presentation gives rise to a perceptual alternation cycle with its own characteristics and dependencies, different from those during continuous presentation. Alternations during intermittent viewing typically occur once every few minutes—much less frequently than the seconds-scale alternations during continuous viewing. Strikingly, alternations during intermittent viewing occur at fairly regular intervals, making for a surprisingly periodic alternation cycle. The duration of this cycle becomes longer as the blank duration between presentations is increased, reaching dozens of minutes in some cases. We interpret our findings in terms of a mathematical model that describes a neural network with competition between alternative interpretations. Network sensitivities depend on prior dominance, thus providing a memory for past perception. Slow changes in sensitivity produce both perceptual stabilization and the regular but infrequent alternations, meaning that the same memory traces are responsible for both. This model provides a good description of psychophysical findings, and offers several indications regarding their neural basis. PMID:19757942

  4. Transition from non-periodic to periodic explosions.

    PubMed

    Cartes, Carlos; Descalzi, Orazio

    2015-12-13

    We show the existence of periodic exploding dissipative solitons. These non-chaotic explosions appear when higher-order nonlinear and dispersive effects are added to the complex cubic-quintic Ginzburg-Landau equation modelling soliton transmission lines. This counterintuitive phenomenon is the result of period-halving bifurcations leading to order (periodic explosions), followed by period-doubling bifurcations (or intermittency) leading to chaos (non-periodic explosions). PMID:26527807

  5. Periodically oscillating plasma sphere

    SciTech Connect

    Park, J.; Nebel, R.A.; Stange, S.; Murali, S. Krupakar

    2005-05-15

    The periodically oscillating plasma sphere, or POPS, is a novel fusion concept first proposed by D. C. Barnes and R. A. Nebel [Fusion Technol. 38, 28 (1998)]. POPS utilizes the self-similar collapse of an oscillating ion cloud in a spherical harmonic oscillator potential well formed by electron injection. Once the ions have been phase-locked, their coherent motion simultaneously produces very high densities and temperatures during the collapse phase of the oscillation. A requirement for POPS is that the electron injection produces a stable harmonic oscillator potential. This has been demonstrated in a gridded inertial electrostatic confinement device and verified by particle simulation. Also, the POPS oscillation has been confirmed experimentally through observation that the ions in the potential well exhibit resonance behavior when driven at the POPS frequency. Excellent agreement between the observed POPS frequencies and the theoretical predictions has been observed for a wide range of potential well depths and three different ion species. Practical applications of POPS require large plasma compressions. These large compressions have been observed in particle simulations, although space charge neutralization remains a major issue.

  6. [Bibliometry of biomedical periodicals].

    PubMed

    Similowski, T; Derenne, J P

    1995-01-01

    Bibliometry or the science citation index is a quantitative evaluation of periodical literature, biomedical or others. It depends above all on an analysis of citations which allows for a calculation of different indices characterising and classifying journals (number of articles published, frequency of citation, impact, topicality...). The applications of bibliometry are varied from the administration of library collections to the appreciation of the significance of a review in its own speciality area. By extension the bibliometry index are sometimes used to evaluate the importance of a discipline in the literature, the place of a nation within a discipline, the significance of certain opinions or the quality of research. The intrinsic limits of bibliometry are such that this last application should be handled with caution. In effect, various biases can mechanically affect the value of different indices and particularly the fact that an article appearing in a prestigious review should not prejudge its quality such as the relevance of the question posed, the validity of the methodology employed or the accuracy of the results. For this, the study of citations is insufficient and some qualitative or semi-quantitative criteria bearing on the contents of the article should be used (critical reading, gate analysis, etc.) This general review has, as its aim, to expose both the definitions and limits of bibliometry illustrating them with some information calculated from the principal respiratory journals.

  7. Treatment of bronchial asthma with low-level laser in attack-free period at children

    NASA Astrophysics Data System (ADS)

    Ailioaie, C.; Ailioaie, Laura

    2000-06-01

    Bronchial asthma is a common disease in both the pediatric and adult populations, characterized by wide variations over short periods of time in resistance to airflow in intrapulmonary airways. A primary goal in the use of low- level laser therapy (LLLT) was the safe, effective and rapid palliation of symptoms owing to tracheal or bronchial obstruction. We have investigated the effects of LLLT comparatively with other modality trials in children's asthma. In the study were included 98 patients aged 10-18 years diagnosed with moderate or severe asthma, in attack- free period. The patients were divided into 3 groups. Group 1 received only laser therapy using extra meridian acupuncture points and scanning technique. Group 2 was treated only with inhaled Serevent 2 X 25 micrometers , two times daily, 3 months. Group 3 was tread with Theophylline retard in dosage of 15-mg/kg/12 h, 3 months. At the end of treatment we remarked a noticeable improvement of the clinical, functional and immunological characteristics at 83 percent of patients in group 1, comparatively with only 70 percent (group 2) and 53 percent (group 3). The LLLT had a very good action on bronchial patency , displayed an immunocorrecting action and is recommended in attack-free periods at children.

  8. Model gives a 3-month warning of Amazonian forest fires

    NASA Astrophysics Data System (ADS)

    Schultz, Colin

    2011-08-01

    The widespread drought suffered by the Amazon rain forest in the summer of 2005 was heralded at the time as the drought of the century. Because of the dehydrated conditions, supplemented by slash and burn agricultural practices, the drought led to widespread forest fires throughout the western Amazon, a portion of the rain forest usually too lush to support spreading wildfires. Only 5 years later, the 2005 season was outdone by even more widespread drought, with fires decimating more than 3000 square kilometers of western Amazonian rain forest. Blame for the wildfires has been consistently laid on deforestation and agricultural practices, but a convincing climatological explanation exists as well. (Geophysical Research Letters, doi:10.1029/2011GL047392, 2011)

  9. Bilingual Children with Primary Language Impairment: 3 Months after Treatment

    ERIC Educational Resources Information Center

    Pham, Giang; Ebert, Kerry Danahy; Kohnert, Kathryn

    2015-01-01

    Background: Evidence on the treatment effectiveness for bilingual children with primary language impairment (PLI) is needed to advance both theory and clinical practice. Of key interest is whether treatment effects are maintained following the completion of short-term intense treatments. Aims: To investigate change in select language and cognitive…

  10. The redoubtable ecological periodic table

    EPA Science Inventory

    Ecological periodic tables are repositories of reliable information on quantitative, predictably recurring (periodic) habitat–community patterns and their uncertainty, scaling and transferability. Their reliability derives from their grounding in sound ecological principle...

  11. New Galactic Double Periodic Variables

    NASA Astrophysics Data System (ADS)

    Mennickent, R. E.; Rosales, J.

    2014-10-01

    We discovered two new Double Periodic Variables in the ASAS catalogue of variable stars, viz., V495 Cen and V4142 Sgr. Other 3 candidates for Double Periodic Variables were found. All systems have relatively long orbital periods. We present improved ephemerides and disentangled light curves.

  12. 75 FR 1301 - Periodic Reporting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-01-11

    ... 39 CFR Part 3050 Periodic Reporting AGENCY: Postal Regulatory Commission. ACTION: Proposed rule... rulemaking proceeding to consider changes in the analytical methods approved for use in periodic reporting.\\1... Docket No. RM2009-10, Order on Analytical Principles Used in Periodic Reporting (Proposals Three...

  13. Evolutionary ecology of periodical insects.

    PubMed

    Heliövaara, K; Väisänen, R; Simon, C

    1994-12-01

    To be periodical, a species must have a fixed life cycle length and adults must appear synchronously, reproduce only once, and die. The consequence of this life history is that, at a given location, adults of a periodical species will be absent or rare in some years and abundant in others. The relative scarcity of periodical Insect species suggests that periodicity does not evolve easily. The major obstacle to its evolution is selection favoring life cycles In which the offspring of any given female appear over a two- or three-year period. Chance events which disrupt this 'bet-hedging' strategy set the stage for periodicity. Mathematical models predict that, given certain initial conditions, intraspecific competition and predation favor its development. Recent studies suggest that periodicity is rarely perfect but that it can persist in the face of limited gene flow through time.

  14. Positive periodic solutions of delayed periodic Lotka-Volterra systems

    NASA Astrophysics Data System (ADS)

    Lin, Wei; Chen, Tianping

    2005-01-01

    In this Letter, for a general class of delayed periodic Lotka-Volterra systems, we prove some new results on the existence of positive periodic solutions by Schauder's fixed point theorem. The global asymptotical stability of positive periodic solutions is discussed further, and conditions for exponential convergence are given. The conditions we obtained are weaker than the previously known ones and can be easily reduced to several special cases.

  15. Fractional-period excitations in continuum periodic systems

    SciTech Connect

    Nistazakis, H. E.; Frantzeskakis, D. J.; Porter, Mason A.; Kevrekidis, P. G.; Nicolin, A.; Chin, J. K.

    2006-12-15

    We investigate the generation of fractional-period states in continuum periodic systems. As an example, we consider a Bose-Einstein condensate confined in an optical-lattice potential. We show that when the potential is turned on nonadiabatically, the system explores a number of transient states whose periodicity is a fraction of that of the lattice. We illustrate the origin of fractional-period states analytically by treating them as resonant states of a parametrically forced Duffing oscillator and discuss their transient nature and potential observability.

  16. On the Period-Amplitude and Amplitude-Period Relationships

    NASA Technical Reports Server (NTRS)

    Wilson, Robert M.; Hathaway, David H.

    2008-01-01

    Examined are Period-Amplitude and Amplitude-Period relationships based on the cyclic behavior of the 12-month moving averages of monthly mean sunspot numbers for cycles 0.23, both in terms of Fisher's exact tests for 2x2 contingency tables and linear regression analyses. Concerning the Period-Amplitude relationship (same cycle), because cycle 23's maximum amplitude is known to be 120.8, the inferred regressions (90-percent prediction intervals) suggest that its period will be 131 +/- 24 months (using all cycles) or 131 +/- 18 months (ignoring cycles 2 and 4, which have the extremes of period, 108 and 164 months, respectively). Because cycle 23 has already persisted for 142 months (May 1996 through February 2008), based on the latter prediction, it should end before September 2008. Concerning the Amplitude-Period relationship (following cycle maximum amplitude versus preceding cycle period), because cycle 23's period is known to be at least 142 months, the inferred regressions (90-percent prediction intervals) suggest that cycle 24's maximum amplitude will be about less than or equal to 96.1 +/- 55.0 (using all cycle pairs) or less than or equal to 91.0 +/- 36.7 (ignoring statistical outlier cycle pairs). Hence, cycle 24's maximum amplitude is expected to be less than 151, perhaps even less than 128, unless cycle pair 23/24 proves to be a statistical outlier.

  17. From Periodic Properties to a Periodic Table Arrangement

    ERIC Educational Resources Information Center

    Besalú, Emili

    2013-01-01

    A periodic table is constructed from the consideration of periodic properties and the application of the principal components analysis technique. This procedure is useful for objects classification and data reduction and has been used in the field of chemistry for many applications, such as lanthanides, molecules, or conformers classification.…

  18. Changing Periods of ST Puppis

    NASA Astrophysics Data System (ADS)

    Walker, S.; Butterworth, N.; Pearce, A.

    2015-12-01

    ST Puppis is a reasonably bright W Virginis variable star, a Type 2 Cepheid with a record of substantial and erratic period changes—21 during the interval 1900 to 1985 with a range of magnitude from 17.4 to 19.2. It was observed as part of Variable Stars South's Cepheid project by Butterworth in 2014 and 2015 using DSLR photometry in BGR passbands and visually by Pearce in 2015. The known period changes are shown graphically and doubtful ones examined and discarded if necessary. With its period and amplitude with a frequently changing period it is a suitable and worthwhile object for visual observing.

  19. Assessing Periodicity of Periodic Leg Movements During Sleep

    PubMed Central

    Rummel, Christian; Gast, Heidemarie; Schindler, Kaspar; Müller, Markus; Amor, Frédérique; Hess, Christian W.; Mathis, Johannes

    2010-01-01

    Background: Periodic leg movements (PLM) during sleep consist of involuntary periodic movements of the lower extremities. The debated functional relevance of PLM during sleep is based on correlation of clinical parameters with the PLM index (PLMI). However, periodicity in movements may not be reflected best by the PLMI. Here, an approach novel to the field of sleep research is used to reveal intrinsic periodicity in inter movement intervals (IMI) in patients with PLM. Methods: Three patient groups of 10 patients showing PLM with OSA (group 1), PLM without OSA or RLS (group 2) and PLM with RLS (group 3) are considered. Applying the “unfolding” procedure, a method developed in statistical physics, enhances or even reveals intrinsic periodicity of PLM. The degree of periodicity of PLM is assessed by fitting one-parameter distributions to the unfolded IMI distributions. Finally, it is investigated whether the shape of the IMI distributions allows to separate patients into different groups. Results: Despite applying the unfolding procedure, periodicity is neither homogeneous within nor considerably different between the three clinically defined groups. Data-driven clustering reveals more homogeneous and better separated clusters. However, they consist of patients with heterogeneous demographic data and comorbidities, including RLS and OSA. Conclusions: The unfolding procedure may be necessary to enhance or reveal periodicity. Thus this method is proposed as a pre-processing step before analyzing PLM statistically. Data-driven clustering yields much more reasonable results when applied to the unfolded IMI distributions than to the original data. Despite this effort no correlation between the degree of periodicity and demographic data or comorbidities is found. However, there are indications that the nature of the periodicity might be determined by long-range interactions between LM of patients with PLM and OSA. PMID:20948585

  20. Robust increase in concurrent hot and dry periods at the global scale

    NASA Astrophysics Data System (ADS)

    Zscheischler, Jakob; Seneviratne, Sonia I.

    2016-04-01

    Ongoing climate change is largely affecting the frequency and magnitude of climate extremes in many areas of the world. Most studies investigating extreme events focus on a single variable such as, for instance, extreme temperature, drought, and heavy precipitation. Often, however, it is compound extremes that have the strongest impacts on ecosystems and society. For example, extreme rainfall in combination with high soil moisture causes floods with severe impacts. Similarly, droughts combined with extreme hot temperatures have particularly devastating impacts on ecosystem functioning. The magnitude of an extreme event can be reflected in its return period. Recently, the concept of copulas has been adapted to estimate multivariate return periods of, e.g., drought extent and duration, peak flow and peak volume, or extreme precipitation events at nearby stations. We use this concept here and estimate bivariate return periods of concurrent hot and dry, and concurrent cold and wet periods of 3 months length on gridded temperature and precipitation data from 1901 onwards. We find a strong increase of concurrent dry and hot periods over the recent decades, in particular in the northern hemisphere. At the same time we detect a decrease in concurrent wet and cold periods. This can be primarily attributed to the strong increase in temperature in many land areas. Averaged over the land surface, the variations of concurrently dry and hot, and cold and wet periods over the 20th century can be related to changes in surface radiation (global dimming and global brightening), which affected both temperature and the hydrological cycle.

  1. Mid-term quasi-periodicities in the CaII-K plage index of the Sun and their implications

    NASA Astrophysics Data System (ADS)

    Chowdhury, Partha; Gokhale, M. H.; Singh, Jagdev; Moon, Y.-J.

    2016-02-01

    We present results of the fast Fourier transform (FFT), the MEM analysis, and the wavelet analysis (WA), of the temporal variation of the monthly disk integrated "CaII-K plage-area and enhanced network (EN) area" hereafter called `plage index' derived by Tlatov et al. (2009), from spectro-heliograms taken in Ca II K line at Kodaikanal Observatory, from February 1907 to April, 1998, In the range {>}3 months and < decade, the Fourier transform power spectra reveal solar cycle periodicity {˜}122 months, its sub-harmonic ˜61 months, two short quasi-periodicities ({>}2 and <4 months), and nine `intermediate-range' quasi-periodicities (≳ 4 mo and <11 yr), in the variation of the plage index. The quasi-periodicities include Rieger, Rieger type and quasi-biennial. The presence of quasi-periodicities and the mean values of the periods are confirmed by the maximum entropy method (MEM). The temporal spans of the quasi-periodicities during different solar cycles are determined from the complex Morlet-wavelet analyses. The Rieger quasi-periodicity (150-160 days) appeared during cycle 21 and cycle 22. Each of the quasi-periodicities in the studied range lies close to one or more planetary periodicities (orbital, or spring tidal, or heliocentric conjunction frequency). We discuss possible interpretations of our results, and those of similar results obtained earlier by other authors, towards understanding the mechanisms of excitation of various quasi-periodicities detected in solar variability parameters.

  2. Time domain period determination techniques

    NASA Technical Reports Server (NTRS)

    Stellingwerf, R. F.

    1980-01-01

    Two simple period determination schemes are discussed. They are well suited to problems involving non-sinusoidal periodic phenomena sampled at a few irregularly spaced points. Statistical properties are discussed. The techniques are applied to the double mode Cepheids BK Cen and TU Cas as test cases.

  3. 76 FR 297 - Periodic Reporting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-01-04

    ... 39 CFR Part 3050 Periodic Reporting AGENCY: Postal Regulatory Commission. ACTION: Notice of proposed... a proposed change in certain analytical methods used in periodic reporting. This action responds to... INFORMATION: Regulatory History, 75 FR 58449 (Sept. 24, 2010). On December 20, 2010, the Postal Service...

  4. 75 FR 7426 - Periodic Reporting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-02-19

    ... 39 CFR Part 3050 Periodic Reporting AGENCY: Postal Regulatory Commission. ACTION: Advance notice of...-789-6820 or stephen.sharfman@prc.gov . SUPPLEMENTARY INFORMATION: Table of Contents I. Background II... approved for use in periodic reporting.\\1\\ The Postal Service labels its proposal ``Proposal One''...

  5. Latino Periodicals: A Selection Guide.

    ERIC Educational Resources Information Center

    Guerena, Salvador, Ed.; Pisano, Vivian M., Ed.

    This guide is a collection development tool of national scope for librarians who need in-depth coverage of Latino periodicals suitable for public, school, and academic libraries. Periodicals evaluated include general interest and popular magazines and newspapers that appeal to Spanish-speaking, bilingual, and English-speaking library patrons and…

  6. 76 FR 296 - Periodic Reporting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-01-04

    ... consider a proposed change in certain analytical methods used in periodic reporting. The proposed change... rulemaking proceeding to consider changes in the analytical methods approved for use in periodic reporting.\\1... Requesting Initiation of a Proceeding to Consider Proposed Changes in Analytic Principles (Proposals...

  7. 76 FR 52915 - Periodic Reporting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-24

    ... informal rulemaking on proposed changes in certain analytical methods used in periodic reporting. The... rulemaking proceeding to consider changes in the analytical methods approved for use in periodic reporting.\\1... Proposed Changes in Analytical Principles (Proposals Four-Eight), August 8, 2011 (Petition). Proposal...

  8. Forward Period Analysis Method of the Periodic Hamiltonian System

    PubMed Central

    Wang, Pengfei

    2016-01-01

    Using the forward period analysis (FPA), we obtain the period of a Morse oscillator and mathematical pendulum system, with the accuracy of 100 significant digits. From these results, the long-term [0, 1060] (time unit) solutions, ranging from the Planck time to the age of the universe, are computed reliably and quickly with a parallel multiple-precision Taylor series (PMT) scheme. The application of FPA to periodic systems can greatly reduce the computation time of long-term reliable simulations. This scheme provides an efficient way to generate reference solutions, against which long-term simulations using other schemes can be tested. PMID:27727295

  9. Schuler Period in LEO Satellites

    NASA Technical Reports Server (NTRS)

    Carpenter, Russell J.; Bar-Itzhack, Itzhack Y.

    2004-01-01

    This paper generalizes and extends the concept of the Schuler oscillation that occurs in the theory of inertial navigation systems, allowing one to see how the Schuler phenomenon affects inertial navigation systems operating in space. We show why a low earth orbit satellite's orbital period is identical to the period of the Schuler pendulum, which is the period of the errors for terrestrial inertial navigation systems. We also show that the generalized form of the Schuler oscillation takes the same form as the Hill-Clohessy-Wiltshire equations for satellite relative motion and that the period of the out-of-plane motion in neighboring satellite relative trajectories is the same as the Schuler period. Finally, we describe how INS gyro drift manifests itself in different coordinate systems for the orbital case. These results may assist orbital flight dynamics and attitude control systems engineers in the design and analysis of INS-equipped spacecraft

  10. LYRA Mid-Term Periodicities

    NASA Astrophysics Data System (ADS)

    Wauters, L.; Dominique, M.; Dammasch, I. E.

    2016-08-01

    The spectra of the PROBA2/LYRA data, similarly to every other solar time series, show predominant periodicities that can be of solar or instrumental origin. In this article, we compare the main periodicities characterizing the LYRA spectrum to those found in the sunspot number, in the 10.7 cm flux, in an X-ray flare index, and in the sunspot area evolution. We focused on the 2010 to 2014 time range, for which the LYRA data are available, although we also briefly address the evolution of the main periodicities in the longer range. The mid-term periodicities at {˜} 28, {˜} 44, {˜} 54, {˜} 59, {˜} 100, {˜} 110, and {˜} 150 days appear as highly significant in several analyzed datasets. The consistency of distinct periodicities between datasets provides characteristics for the global Sun. This consistency also strengthens the reliability of LYRA data.

  11. Incorporating Spectra Into Periodic Timing

    NASA Astrophysics Data System (ADS)

    Connors, Alanna; Hong, J.; Protopapas, P.; Kashyap, V.

    2011-09-01

    The Chandra surveys have resulted in a wealth of data on low-luminosity X-ray sources (Lx 1030-34 erg/s) of Galactic scales beyond the local solar neighborhood. Many of these are compact binaries, in particular, cataclysmic variables, often identified by their periodic X-ray variability and spectra. Hong et al. (2009, 2011) have used energy quantiles (Hong, Schlegel & Grindlay, 2004) as a fast, robust indicator of spectral hardness and absorption of the X-ray sources. Energy quantiles also enable a simple but effective illustration of spectral changes with phase in these periodic systems: e.g. absorption by the accreting material is understood to drive the periodic light-curves. An interesting question is how to best make use of the information encapsulated in the periodic change in energy spectrum, along with the periodic change in intensity, especially for cases of ambiguous period determination? And, how to do it computationally efficiently? A first approach is to do the period search in intensity, as is standard; and then use a criterion of spectral variation to verify possible periods. Huijse, Zegers & Protopapas (2011) recently demonstrated a powerful period estimation technique using information potential and correntropy embedded in the light curve. Similar quantities based on energies (or energy quantiles) of X-ray photons can serve as criteria of spectral variation. A different approach treats the spectrum variations and intensity variations completely independently, searching through period-space in each, and then combining the results. A more general method would include both at the same time, looking for statistically significant variations above what is expected for a constant (in intensity and spectrum).

  12. Periodic and Quasi-Periodic Orbitsfor the Standard Map

    NASA Astrophysics Data System (ADS)

    Berretti, Alberto; Gentile, Guido

    We consider both periodic and quasi-periodic solutions for the standard map, and we study the corresponding conjugating functions, i.e. the functions conjugating the motions to trivial rotations. We compare the invariant curves with rotation numbers ω satisfying the Bryuno condition and the sequences of periodic orbits with rotation numbers given by their convergents ωN = pN/qN. We prove the following results for N--> ∞: (1) for rotation numbers ωNN we study the radius of convergence of the conjugating functions and we find lower bounds on them, which tend to a limit which is a lower bound on the corresponding quantity for ω (2) the periodic orbits consist of points which are more and more close to the invariant curve with rotation number ω (3) such orbits lie on analytical curves which tend uniformly to the invariant curve.

  13. Cyclical Period Changes in Short-Period Dwarf Novae

    NASA Astrophysics Data System (ADS)

    Baptista, R.; Borges, B. W.; Bond, H. E.; Jablonski, F.; Steiner, J. E.; Grauer, A. D.

    2004-01-01

    The observed-minus-calculated (O-C) diagrams of the eclipse timings of three dwarf novae of the SU UMa sub-class are presented and discussed. The (O-C) diagrams cover 28 24 and 15 years respectively for Z~Cha V2051~Oph and V4140~Sgr and show clear orbital period changes. Z~Cha shows conspicuous cyclical changes of period 28+/-2 yr and amplitude 60+/-12 s. V2051~Oph shows a cyclical period change of period 22+/-2 yr and amplitude 17+/-3 s. The (O-C) diagram of V4140~Sgr shows less convincing evidence but can also be explained in terms of a cyclical period modulation with an amplitude of about 16s and a time scale of 6.9+/-0.3 years. The best explanation for these observations is that of a solar-type magnetic activity cycle in the secondary star modulating its radius and consequently the mass transfer rate and the orbital separation on time scales of years. These results support the recent findings of Ak Ozkan & Mattei that the quiescent magnitudes and outburst interval of a sample of dwarf novae (including many SU UMa stars) show cyclical variations produced by solar-type magnetic activity cycles. Our results also confirm that the fully-convective secondary stars of these short period binaries still possess non-negligible magnetic fields.

  14. 75 FR 65593 - Periodic Reporting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-10-26

    ... Rules Concerning Periodic Reporting of Service Performance Measurements and Customer Satisfaction, May... From the Federal Register Online via the Government Publishing Office POSTAL REGULATORY COMMISSION... waiver request. SUMMARY: The Commission is establishing a docket to address a recent Postal...

  15. 76 FR 80312 - Periodic Reporting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-12-23

    .... SUMMARY: The Commission is establishing a docket to consider new measurement of Flats Sequencing Systems... of the Business Reply Mail cost model in periodic reporting of service performance measurement...). Proposal Sixteen: proposed productivity measurement for Flats Sequencing System. Proposal...

  16. Autism: a "critical period" disorder?

    PubMed

    LeBlanc, Jocelyn J; Fagiolini, Michela

    2011-01-01

    Cortical circuits in the brain are refined by experience during critical periods early in postnatal life. Critical periods are regulated by the balance of excitatory and inhibitory (E/I) neurotransmission in the brain during development. There is now increasing evidence of E/I imbalance in autism, a complex genetic neurodevelopmental disorder diagnosed by abnormal socialization, impaired communication, and repetitive behaviors or restricted interests. The underlying cause is still largely unknown and there is no fully effective treatment or cure. We propose that alteration of the expression and/or timing of critical period circuit refinement in primary sensory brain areas may significantly contribute to autistic phenotypes, including cognitive and behavioral impairments. Dissection of the cellular and molecular mechanisms governing well-established critical periods represents a powerful tool to identify new potential therapeutic targets to restore normal plasticity and function in affected neuronal circuits.

  17. Period Adjustment of TT Scuti

    NASA Astrophysics Data System (ADS)

    Cederbloom, Steve E.

    1985-12-01

    The RR Lyrae variable TT Scuti was studied using photographic photometry. The O-C data show a possible downwards curve, which would indicate a decreasing period, but the results are not conclusive. New linear elements are: JD(max) = 2439384.915 + 0.45293855 E. A limit for the maximum rate of change of the period is -0.03 +/- 0.04 cycles per million years.

  18. Shortest recurrence periods of novae

    SciTech Connect

    Kato, Mariko; Saio, Hideyuki; Hachisu, Izumi; Nomoto, Ken'ichi

    2014-10-01

    Stimulated by the recent discovery of the 1 yr recurrence period nova M31N 2008-12a, we examined the shortest recurrence periods of hydrogen shell flashes on mass-accreting white dwarfs (WDs). We discuss the mechanism that yields a finite minimum recurrence period for a given WD mass. Calculating the unstable flashes for various WD masses and mass accretion rates, we identified a shortest recurrence period of about two months for a non-rotating 1.38 M {sub ☉} WD with a mass accretion rate of 3.6 × 10{sup –7} M {sub ☉} yr{sup –1}. A 1 yr recurrence period is realized for very massive (≳ 1.3 M {sub ☉}) WDs with very high accretion rates (≳ 1.5 × 10{sup –7} M {sub ☉} yr{sup –1}). We revised our stability limit of hydrogen shell burning, which will be useful for binary evolution calculations toward Type Ia supernovae.

  19. Bragg interactions in periodic media

    NASA Technical Reports Server (NTRS)

    Jaggard, D. L.

    1976-01-01

    The interaction of electromagnetic waves of wavelength lambda with periodic structures of spatial period lambda are studied. The emphasis of the work is on Bragg interactions where lambda approximately equal to 2 lambda/N and the Bragg order N takes on the values 1, 2,.... An extended coupled waves (ECW) theory is developed for the case N greater or equal to 2 and the results of the theory are found to compare favorably with the exact results of Floquet theory. Numerous numerical results are displayed as Brillouin diagrams for the first few Bragg orders. Moreover, explicit expressions for coupling coefficients, bandgap shifts and bandgap widths are derived for singly periodic media. Particular note is taken of phase speeding effects.

  20. Periodicity in marine extinction events

    NASA Technical Reports Server (NTRS)

    Sepkoski, J. John, Jr.; Raup, David M.

    1986-01-01

    The periodicity of extinction events is examined in detail. In particular, the temporal distribution of specific, identifiable extinction events is analyzed. The nature and limitations of the data base on the global fossil record is discussed in order to establish limits of resolution in statistical analyses. Peaks in extinction intensity which appear to differ significantly from background levels are considered, and new analyses of the temporal distribution of these peaks are presented. Finally, some possible causes of periodicity and of interdependence among extinction events over the last quarter billion years of earth history are examined.

  1. 7 CFR 51.2001 - Blank.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE REGULATIONS AND STANDARDS UNDER THE AGRICULTURAL MARKETING ACT OF 1946... containing no kernel or a kernel filling less than one-fourth the capacity of the shell....

  2. Rotational Period of 2770 Tsvet

    NASA Astrophysics Data System (ADS)

    Franco, Lorenzo; Papini, Riccardo

    2014-07-01

    Photometric observations of main-belt asteroid 2770 Tsvet were made over three nights during 2014 March. Lightcurve analysis shows a synodic period P = 7.82 ± 0.01 h with an amplitude A = 0.47 ± 0.03 mag.

  3. 76 FR 8325 - Periodic Reporting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-02-14

    ... Service Performance Measurements and Customer Satisfaction, May 25, 2010, at 22-24 (Order No. 465). Order... From the Federal Register Online via the Government Publishing Office POSTAL REGULATORY COMMISSION... certain temporary waivers from periodic reporting of service performance measurement. Establishing...

  4. On Some Periodic Toda Lattices

    PubMed Central

    Kac, M.; Van Moerbeke, Pierre

    1975-01-01

    A discrete version of Floquet's theory is developed and applied to a system of non-linear differential equations related to the periodic Toda lattice. A special solution previously found by Toda is thus seen to fit into the formalism of inverse scattering problems. PMID:16592244

  5. Shell Games: Uncovering Periodic Properties.

    ERIC Educational Resources Information Center

    Lamb, William G.

    1983-01-01

    Describes activities (demonstrations/experiments) used to introduce history of periodic properties--without electrons, orbitals, filling shells, or any conception of atoms beyond Dalton's model. Activities supplement first chapter in a currently available chemistry text. Indicates potential danger of experiments if proper safety precautions are…

  6. The Period of Salutary Neglect.

    ERIC Educational Resources Information Center

    Hyland, John T.; And Others

    1987-01-01

    Presents a lesson designed to teach students about the period of Salutary Neglect (100 years before the French and Indian Wars) and its effects on later historical events. Provides an advance organizer which puts students in a situation of salutary neglect and includes student and teacher resources on the Stamp Act, the Townshend Acts, and the…

  7. Quantifying periodicity in omics data.

    PubMed

    Amariei, Cornelia; Tomita, Masaru; Murray, Douglas B

    2014-01-01

    Oscillations play a significant role in biological systems, with many examples in the fast, ultradian, circadian, circalunar, and yearly time domains. However, determining periodicity in such data can be problematic. There are a number of computational methods to identify the periodic components in large datasets, such as signal-to-noise based Fourier decomposition, Fisher's g-test and autocorrelation. However, the available methods assume a sinusoidal model and do not attempt to quantify the waveform shape and the presence of multiple periodicities, which provide vital clues in determining the underlying dynamics. Here, we developed a Fourier based measure that generates a de-noised waveform from multiple significant frequencies. This waveform is then correlated with the raw data from the respiratory oscillation found in yeast, to provide oscillation statistics including waveform metrics and multi-periods. The method is compared and contrasted to commonly used statistics. Moreover, we show the utility of the program in the analysis of noisy datasets and other high-throughput analyses, such as metabolomics and flow cytometry, respectively.

  8. 76 FR 20906 - Periodic Reporting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-04-14

    ... a proposed change in certain analytical methods used in periodic reporting. This action responds to... an informal rulemaking proceeding to consider changes in the analytical methods approved for use in... Proceeding to Consider Proposed Changes in Analytic Principles (Proposal One), April 6, 2011...

  9. Hyperkalemic periodic paralysis associated with multiple sleep onset REM periods.

    PubMed

    Iranzo, A; Santamaria, J

    1999-12-15

    A 24-year-old man with sporadic hyperkalemic periodic paralysis (HPP) presented with moderate excessive daytime sleepiness and transitory episodes of weakness which occurred during and after sleep. Multiple sleep latency test (MSLT) demonstrated the presence of five sleep onset REM periods (SOREMPs) and a sleep latency of five minutes. Treatment with a diuretic which decreases serum potassium resolved all the clinical symtomps and a new MSLT showed the absence of SOREMPs and a sleep latency of 13.5 minutes. To our knowledge, the patient herein reported is the first case that associates sleep abnormalities and multiple SOREMPs with HPP. Furthermore, the present case suggests that SOREMPs may be explained by an increased extracellular potassium conductance related to HPP.

  10. [Effect of alcohol in combination with stress in the prenatal period on adult mice behaviour].

    PubMed

    Morozova, M V; Popova, N K

    2010-11-01

    The aim of the present study was to investigate the effects of the prenatal alcohol and stress on behaviour of adult CBA/LacJ male mice. Pregnant mice were given ethanol 11% from to 21 days of the gestation and were exposed to restraint stress for two hours daily from 15 to 21 days gestation. At 3 months of age, the offspring were tested for behaviour. Alcohol and stress-exposed animals buried more marbles in the marble-burying test, which models obsessive-compulsive disorders (OCD). In addition, the alcohol and stress-exposed males showed increased social activity. No significant effects of the prenatal alcohol and stress exposure on locomotor activity, anxiety, exploring activity of the adult male mice were revealed. Conclusion was made that exposure to the alcohol and stress combination in prenatal period produces predisposition to OCD.

  11. Quantum gates by periodic driving

    PubMed Central

    Shi, Z. C.; Wang, W.; Yi, X. X.

    2016-01-01

    Topological quantum computation has been extensively studied in the past decades due to its robustness against decoherence. One way to realize the topological quantum computation is by adiabatic evolutions—it requires relatively long time to complete a gate, so the speed of quantum computation slows down. In this work, we present a method to realize single qubit quantum gates by periodic driving. Compared to adiabatic evolution, the single qubit gates can be realized at a fixed time much shorter than that by adiabatic evolution. The driving fields can be sinusoidal or square-well field. With the sinusoidal driving field, we derive an expression for the total operation time in the high-frequency limit, and an exact analytical expression for the evolution operator without any approximations is given for the square well driving. This study suggests that the period driving could provide us with a new direction in regulations of the operation time in topological quantum computation. PMID:26911900

  12. Periodic Structures in Optical Fibres.

    NASA Astrophysics Data System (ADS)

    Hand, Duncan Paul

    1990-01-01

    Available from UMI in association with The British Library. The work presented in this thesis concerns techniques for the formation of periodic structures in optical fibres. Two different methods of producing such structures are studied in detail. The first of these involves a breakdown mechanism (known as the 'fibre fuse') that permanently damages the core glass in a periodic manner leaving it unable to guide light. The dynamics of this mechanism are studied, with a view to controlling it for the production of interactive grating structures. It is determined that, due to a sharp rise in fibre absorption with temperature, a thermal shock -wave, with a typical thermal gradient of several hundred degrees Kelvin per micron, forms and travels along the fibre, heating the core glass to such an extent that damage occurs. The periodicity of the resultant damage arises from thermal focusing and defocusing of light in the region of this shock-wave. The second method makes use of the photorefractivity observed in certain germanosilicate fibres on exposure to moderate intensity blue light of wavelength ~480nm or UV light ~240nm. A single-mode fibre transmission filter is demonstrated for the first time, produced by exposing a fibre Sagnac loop mirror to 488nm holographic fringes. Average index changes are shown to occur if such fibres are exposed to spatially uniform blue or UV light, indicating that grating formation is by a different mechanism to the local charge separation which occurs in photorefractive crystals. The various characteristics of these average index changes are measured and analysed, with the conclusion that they result from defect centre formation, driven by two photon absorption with blue light, or single photon absorption with UV light. Associated birefringence changes are also measured and are exploited in a hi-bi fibre to periodically perturb the birefringence axes, producing a narrow-line transmission filter.

  13. Down hole periodic seismic generator

    DOEpatents

    Hardee, Harry C.; Hills, Richard G.; Striker, Richard P.

    1989-01-01

    A down hole periodic seismic generator system for transmitting variable frequency, predominantly shear-wave vibration into earth strata surrounding a borehole. The system comprises a unitary housing operably connected to a well head by support and electrical cabling and contains clamping apparatus for selectively clamping the housing to the walls of the borehole. The system further comprises a variable speed pneumatic oscillator and a self-contained pneumatic reservoir for producing a frequency-swept seismic output over a discrete frequency range.

  14. Advanced downhole periodic seismic generator

    DOEpatents

    Hardee, Harry C.; Hills, Richard G.; Striker, Richard P.

    1991-07-16

    An advanced downhole periodic seismic generator system for transmitting variable frequency, predominantly shear-wave vibration into earth strata surrounding a borehole. The system comprises a unitary housing operably connected to a well head by support and electrical cabling and contains clamping apparatus for selectively clamping the housing to the walls of the borehole. The system further comprises a variable speed pneumatic oscillator and a self-contained pneumatic reservoir for producing a frequency-swept seismic output over a discrete frequency range.

  15. Act No. 16.094 of 26 October 1989 amending Number 2 of Article 187 of the Civil Code, with respect to the time periods applicable in grounds for divorce.

    PubMed

    1989-01-01

    This Act amends Article 187 of the Uruguayan Civil Code to eliminate the requirement that a marriage last 2 years before a couple can obtain a divorce on the grounds of mutual consent and to lower from 6 months to 3 months the length of each of 2 periods that a couple must wait after they appear in court before the divorce on the grounds of mutual consent is granted.

  16. Left Ventricular Morphology in Different Periods of the Training Season in Elite Young Swimmers.

    PubMed

    Csajági, Eszter; Szauder, Ipoly; Major, Zsuzsanna; Pavlik, Gábor

    2015-05-01

    Training adaptation of the left ventricle (LV) and it's reversibility following the cessation of training in adults is well known and also studied in children. In the current study we describe the changes in the LV morphology in association with the training season during a 1.5 year follow-up period. 15 elite adolescent swimmers, seven girls and 8 boys with 6 years of swimming history and 20 hr per week training were observed. Their data were compared with 15 age and gender matched nonathletes. LV adaptation was measured with 2D-echocardiography at the baseline preseason and every 3 months, according to the macro cyclic periods of training. Nonathletes were observed at the first and fifth stage of the study. Remarkable LV morphological adaptation has been detected in the swimmers. The greatest LV muscle mass (LVMM: 228 ± 46g) and smallest end-diastolic diameter (LVIDd:44.9 ± 3.4mm) were observed at the end of the second general endurance preparation period (GEP2), but the LVMM/BSA (Rel.LVMM: 85 ± 10g/m) failed to change during the follow-up in athletes. On the basis of our results, we suggest comparing absolute LV dimensions only in studies made at the same training period to avoid bias due to alterations with the training season.

  17. Haemocytic periodicity and periodic disorders: Periodic neutropenia, thrombocytopenia, lymphocytosis and anaemia

    PubMed Central

    Reimann, Hobart A.

    1971-01-01

    Evidence has accumulated of rhythmic numerical oscillation of each of the blood cells either independently or in combinations. The cyclic changes originate in the marrow of some normal persons and animals without causing illness, and can be induced experimentally. In more than 100 reported instances, periodic oscillations of various cells were accompanied by respective episodes of the disorders named in the title. The disorders may be transitory but usually recur throughout life and occasionally are fatal. All resist therapy. Features in common suggest an interrelationship of the haemal disorders and other disparate heritable periodic diseases. Theoretically, the rhythms are regulated by ubiquitous, inherent, intracellular bioclocks controlled hypothalamically or neurohumorally in relation to a feedback mechanism. Reactions to long cycles are of greater clinical importance than disturbances arising from the circadian rhythm. PMID:4397784

  18. Rotational period of GQ Lupi

    NASA Astrophysics Data System (ADS)

    Broeg, C.; Schmidt, T. O. B.; Guenther, E.; Gaedke, A.; Bedalov, A.; Neuhäuser, R.; Walter, F. M.

    2007-06-01

    Aims: We wanted to determine the rotation parameters of GQ Lup A, thereby constraining the evolutionary history of the GQ Lup system. Methods: We have undertaken a photometric monitoring campaign on GQ Lup A consisting of two epochs spaced one year apart. We also searched the photometric archives to enlarge the data set. Results: We were able to determine the photometric period (8.45±0.2 days) in both epochs in several photometric bands. This periodicity could also be found in some of the archival data. The combined false-alarm probability is 0.015. The variation is most likely caused by hot spots on the surface of GQ Lup A. This, combined with high-resolution spectra (v sin i) allows calculation of GQ Lup A's inclination (i=27±5°). Radial velocity data also contains this period but is inconclusive. Nevertheless, the RV data supports the interpretation that hot spots cause the photometric variation. We use the known K-band variability, amplitude, and phase of GQ Lup A together with a new image of GQ Lup A+b, taken quasi-simultaneously with our monitoring of the star, to confirm the magnitude and, hence, luminosity of the companion. Based on observations obtained on Cerro Paranal, Chile, in ESO program 075.C-0710(C) and on La Silla, Chile, in ESO programs 074.C-0034(A),075.C-0710(E), 075.C-0710(F), 075.C-0202(A), 076.C-0010(A) as well as with ANDICAM of the SMARTS consortium. Photometry data of epochs I and II are only available in electronic form at the CDS via anonymous ftp to cdsarc.u-strasbg.fr (130.79.128.5) or via http://cdsweb.u-strasbg.fr/cgi-bin/qcat?J/A+A/468/1039

  19. Periodic roads and quantized wheels

    NASA Astrophysics Data System (ADS)

    de Campos Valadares, Eduardo

    2016-08-01

    We propose a simple approach to determine all possible wheels that can roll smoothly without slipping on a periodic roadbed, while maintaining the center of mass at a fixed height. We also address the inverse problem that of obtaining the roadbed profile compatible with a specific wheel and all other related "quantized wheels." The role of symmetry is highlighted, which might preclude the center of mass from remaining at a fixed height. A straightforward consequence of such geometric quantization is that the gravitational potential energy and the moment of inertia are discrete, suggesting a parallelism between macroscopic wheels and nano-systems, such as carbon nanotubes.

  20. Periodic permanent magnet focused klystron

    SciTech Connect

    Ferguson, Patrick; Read, Michael; Ives, R Lawrence

    2015-04-21

    A periodic permanent magnet (PPM) klystron has beam transport structures and RF cavity structures, each of which has permanent magnets placed substantially equidistant from a beam tunnel formed about the central axis, and which are also outside the extent of a cooling chamber. The RF cavity sections also have permanent magnets which are placed substantially equidistant from the beam tunnel, but which include an RF cavity coupling to the beam tunnel for enhancement of RF carried by an electron beam in the beam tunnel.

  1. 43 CFR 10010.45 - Time periods.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 43 Public Lands: Interior 2 2014-10-01 2014-10-01 false Time periods. 10010.45 Section 10010.45... Environmental Impact Statements § 10010.45 Time periods. (a) The minimum review period for a draft EIS will be... proposed reductions in time periods or any extensions of time periods proposed by those agencies....

  2. 43 CFR 10010.45 - Time periods.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 43 Public Lands: Interior 2 2013-10-01 2013-10-01 false Time periods. 10010.45 Section 10010.45... Environmental Impact Statements § 10010.45 Time periods. (a) The minimum review period for a draft EIS will be... proposed reductions in time periods or any extensions of time periods proposed by those agencies....

  3. 43 CFR 10010.45 - Time periods.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 43 Public Lands: Interior 2 2012-10-01 2012-10-01 false Time periods. 10010.45 Section 10010.45... Environmental Impact Statements § 10010.45 Time periods. (a) The minimum review period for a draft EIS will be... proposed reductions in time periods or any extensions of time periods proposed by those agencies....

  4. 7 CFR 930.7 - Fiscal period.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... Definitions § 930.7 Fiscal period. Fiscal period is synonymous with fiscal year and means the 12-month period beginning on July 1 of any year and ending on June 30 of the following year, or such other period as the... 7 Agriculture 8 2011-01-01 2011-01-01 false Fiscal period. 930.7 Section 930.7...

  5. Periodic bedrock ridges on Mars

    NASA Astrophysics Data System (ADS)

    Montgomery, David R.; Bandfield, Joshua L.; Becker, Scott K.

    2012-03-01

    Evidence for sediment transport and erosion by wind is widespread over the surface of Mars today and was likely a major geomorphic process for much of its geological past. Although Martian surface features resembling aeolian dunes and ripples have been recognized since the Mariner and Viking missions, such features have been interpreted previously as active, indurated, or exhumed sedimentary forms. Here we report evidence based on High Resolution Imaging Science Experiment images that show some megaripple forms are eroded into cohesive substrate rather than being composed of loose granular material or fossilized dunes. Exposure of stratigraphic continuity within layered, cohesive material extending crest to trough through features with mean wavelengths of 18 to 51 m demonstrates the primarily erosional formation of what we term periodic bedrock ridges (PBRs). Hence some surfaces on Mars previously considered to be covered by wind-deposited material are actually wind-carved exposures that offer windows into Martian history. PBRs lack the distinctive streamlining associated with wind-parallel yardangs and comparison of PBR orientation to yardangs, megayardangs, and active sedimentary dunes in the same vicinity confirm that these PBRs formed transverse to prevailing winds. Observed wavelengths of PBRs are comparable to those predicted by a simple model for erosional wavelengths of periodic transverse bed forms owing to the spacing of flow separations within the flow. Recognition of these transverse aeolian erosional forms brings up the question of how widespread Martian PBRs are and how many have been misinterpreted as active or indurated (fossilized) sedimentary dunes.

  6. Quasi-periodic spatiotemporal filtering.

    PubMed

    Burghouts, Gertjan J; Geusebroek, Jan-Mark

    2006-06-01

    This paper presents the online estimation of temporal frequency to simultaneously detect and identify the quasiperiodic motion of an object. We introduce color to increase discriminative power of a reoccurring object and to provide robustness to appearance changes due to illumination changes. Spatial contextual information is incorporated by considering the object motion at different scales. We combined spatiospectral Gaussian filters and a temporal reparameterized Gabor filter to construct the online temporal frequency filter. We demonstrate the online filter to respond faster and decay faster than offline Gabor filters. Further, we show the online filter to be more selective to the tuned frequency than Gabor filters. We contribute to temporal frequency analysis in that we both identify ("what") and detect ("when") the frequency. In color video, we demonstrate the filter to detect and identify the periodicity of natural motion. The velocity of moving gratings is determined in a real world example. We consider periodic and quasiperiodic motion of both stationary and nonstationary objects. PMID:16764282

  7. Permeability relation for periodic structures.

    PubMed

    Dunn, K J; LaTorraca, G A; Bergman, D J

    1998-01-01

    The permeability relation for periodic porous media is studied with respect to other petrophysical parameters such as formation factor, porosity, surface-to-volume ratio, and nuclear magnetic resonance (NMR) relaxation time. All these quantities were computed for periodic structures of simple, body-centered, and face-centered cubic arrays of touching and overlapping spheres. The formation factors were calculated by using a method which is based on a Fourier-space representation of an integral equation for the electric potential in a two-component composite. The nuclear magnetic resonance relaxation time for the case where surface-enchanced relaxation plays a dominant role is known to be V P/rho S (VP is the pore volume, S is the pore surface, is the surface relaxation strength) when rho is not too large. Previously calculated permeabilities for these structures from the literature were used for correlation studies with other petrophysical parameters. Various correlation schemes among these quantities, such as k = aTbFc, and k = aTb phi c, were investigated, where k is permeability, T is the NMR relaxation time, phi is the porosity, and F is the formation factor. PMID:9803908

  8. A periodic table for cancer.

    PubMed

    Epstein, Richard J

    2015-01-01

    Cancers exhibit differences in metastatic behavior and drug sensitivity that correlate with certain tumor-specific variables such as differentiation grade, growth rate/extent and molecular regulatory aberrations. In practice, patient management is based on the past results of clinical trials adjusted for these biomarkers. Here, it is proposed that treatment strategies could be fine-tuned upfront simply by quantifying tumorigenic spatial (cell growth) and temporal (genetic stability) control losses, as predicted by genetic defects of cell-cycle-regulatory gatekeeper and genome-stabilizing caretaker tumor suppressor genes, respectively. These differential quantifications of tumor dysfunction may in turn be used to create a tumor-specific 'periodic table' that guides rational formulation of survival-enhancing anticancer treatment strategies.

  9. Periodic folding of viscous sheets

    NASA Astrophysics Data System (ADS)

    Ribe, Neil M.

    2003-09-01

    The periodic folding of a sheet of viscous fluid falling upon a rigid surface is a common fluid mechanical instability that occurs in contexts ranging from food processing to geophysics. Asymptotic thin-layer equations for the combined stretching-bending deformation of a two-dimensional sheet are solved numerically to determine the folding frequency as a function of the sheet’s initial thickness, the pouring speed, the height of fall, and the fluid properties. As the buoyancy increases, the system bifurcates from “forced” folding driven kinematically by fluid extrusion to “free” folding in which viscous resistance to bending is balanced by buoyancy. The systematics of the numerically predicted folding frequency are in good agreement with laboratory experiments.

  10. Spontaneous periodic hypothermia and hyperhidrosis.

    PubMed

    Dundar, Nihal Olgac; Boz, Adil; Duman, Ozgur; Aydin, Funda; Haspolat, Senay

    2008-12-01

    We present a patient diagnosed with Shapiro syndrome without corpus callosum agenesis. A 4-year-old-girl was admitted to the hospital with complaints of sweating, cooling, and drowsiness that continued during the last week of her admission. Attacks occurred almost daily, and lasted for about 1 hour. All laboratory findings, as well as Holter and echocardiography results, were normal. Cranial magnetic resonance imaging demonstrated an intact corpus callosum, and electroencephalography obtained during an attack revealed normal findings. However, technetium 99m-labeled hexamethylpropylene amine oxime brain single-photon emission computed tomography indicated increased perfusion in the right thalamus, basal ganglia, and inferior frontal areas during a hypothermic period. Although oxcarbazepine reduced the frequency of attacks, they were not halted completely. The patient responded better to carbamazepine. PMID:19027594

  11. Deep-sea octopus (Graneledone boreopacifica) conducts the longest-known egg-brooding period of any animal.

    PubMed

    Robison, Bruce; Seibel, Brad; Drazen, Jeffrey

    2014-01-01

    Octopuses typically have a single reproductive period and then they die (semelparity). Once a clutch of fertilized eggs has been produced, the female protects and tends them until they hatch. In most shallow-water species this period of parental care can last from 1 to 3 months, but very little is known about the brooding of deep-living species. In the cold, dark waters of the deep ocean, metabolic processes are often slower than their counterparts at shallower depths. Extrapolations from data on shallow-water octopus species suggest that lower temperatures would prolong embryonic development periods. Likewise, laboratory studies have linked lower temperatures to longer brooding periods in cephalopods, but direct evidence has not been available. We found an opportunity to directly measure the brooding period of the deep-sea octopus Graneledone boreopacifica, in its natural habitat. At 53 months, it is by far the longest egg-brooding period ever reported for any animal species. These surprising results emphasize the selective value of prolonged embryonic development in order to produce competitive hatchlings. They also extend the known boundaries of physiological adaptations for life in the deep sea.

  12. Deep-sea octopus (Graneledone boreopacifica) conducts the longest-known egg-brooding period of any animal.

    PubMed

    Robison, Bruce; Seibel, Brad; Drazen, Jeffrey

    2014-01-01

    Octopuses typically have a single reproductive period and then they die (semelparity). Once a clutch of fertilized eggs has been produced, the female protects and tends them until they hatch. In most shallow-water species this period of parental care can last from 1 to 3 months, but very little is known about the brooding of deep-living species. In the cold, dark waters of the deep ocean, metabolic processes are often slower than their counterparts at shallower depths. Extrapolations from data on shallow-water octopus species suggest that lower temperatures would prolong embryonic development periods. Likewise, laboratory studies have linked lower temperatures to longer brooding periods in cephalopods, but direct evidence has not been available. We found an opportunity to directly measure the brooding period of the deep-sea octopus Graneledone boreopacifica, in its natural habitat. At 53 months, it is by far the longest egg-brooding period ever reported for any animal species. These surprising results emphasize the selective value of prolonged embryonic development in order to produce competitive hatchlings. They also extend the known boundaries of physiological adaptations for life in the deep sea. PMID:25075745

  13. Deep-Sea Octopus (Graneledone boreopacifica) Conducts the Longest-Known Egg-Brooding Period of Any Animal

    PubMed Central

    Robison, Bruce; Seibel, Brad; Drazen, Jeffrey

    2014-01-01

    Octopuses typically have a single reproductive period and then they die (semelparity). Once a clutch of fertilized eggs has been produced, the female protects and tends them until they hatch. In most shallow-water species this period of parental care can last from 1 to 3 months, but very little is known about the brooding of deep-living species. In the cold, dark waters of the deep ocean, metabolic processes are often slower than their counterparts at shallower depths. Extrapolations from data on shallow-water octopus species suggest that lower temperatures would prolong embryonic development periods. Likewise, laboratory studies have linked lower temperatures to longer brooding periods in cephalopods, but direct evidence has not been available. We found an opportunity to directly measure the brooding period of the deep-sea octopus Graneledone boreopacifica, in its natural habitat. At 53 months, it is by far the longest egg-brooding period ever reported for any animal species. These surprising results emphasize the selective value of prolonged embryonic development in order to produce competitive hatchlings. They also extend the known boundaries of physiological adaptations for life in the deep sea. PMID:25075745

  14. 7 CFR 1280.613 - Voting period.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 10 2010-01-01 2010-01-01 false Voting period. 1280.613 Section 1280.613 Agriculture... INFORMATION ORDER Procedures To Request a Referendum Definitions § 1280.613 Voting period. The term voting period means a 4-week period to be announced by the Secretary for voting the referendum. Procedures...

  15. 7 CFR 1280.613 - Voting period.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 10 2011-01-01 2011-01-01 false Voting period. 1280.613 Section 1280.613 Agriculture... INFORMATION ORDER Procedures To Request a Referendum Definitions § 1280.613 Voting period. The term voting period means a 4-week period to be announced by the Secretary for voting the referendum. Procedures...

  16. 7 CFR 926.5 - Fiscal period.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... RECORDKEEPING REQUIREMENTS APPLICABLE TO CRANBERRIES NOT SUBJECT TO THE CRANBERRY MARKETING ORDER § 926.5 Fiscal period. Fiscal period is synonymous with fiscal year and crop year and means the 12-month period... 7 Agriculture 8 2012-01-01 2012-01-01 false Fiscal period. 926.5 Section 926.5...

  17. 7 CFR 924.7 - Fiscal period.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... COUNTIES IN WASHINGTON AND IN UMATILLA COUNTY, OREGON Order Regulating Handling Definitions § 924.7 Fiscal period. Fiscal period is synonymous with fiscal year and means the 12-month period ending on March 31 of... 7 Agriculture 8 2010-01-01 2010-01-01 false Fiscal period. 924.7 Section 924.7...

  18. 7 CFR 926.5 - Fiscal period.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... RECORDKEEPING REQUIREMENTS APPLICABLE TO CRANBERRIES NOT SUBJECT TO THE CRANBERRY MARKETING ORDER § 926.5 Fiscal period. Fiscal period is synonymous with fiscal year and crop year and means the 12-month period... 7 Agriculture 8 2014-01-01 2014-01-01 false Fiscal period. 926.5 Section 926.5...

  19. 7 CFR 926.5 - Fiscal period.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... RECORDKEEPING REQUIREMENTS APPLICABLE TO CRANBERRIES NOT SUBJECT TO THE CRANBERRY MARKETING ORDER § 926.5 Fiscal period. Fiscal period is synonymous with fiscal year and crop year and means the 12-month period... 7 Agriculture 8 2010-01-01 2010-01-01 false Fiscal period. 926.5 Section 926.5...

  20. 7 CFR 916.7 - Fiscal period.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Regulating Handling Definitions § 916.7 Fiscal period. Fiscal period is synonymous with fiscal year and means the 12-month period beginning on March 1 of one year and ending on the last day of February of the... 7 Agriculture 8 2010-01-01 2010-01-01 false Fiscal period. 916.7 Section 916.7...

  1. 7 CFR 926.5 - Fiscal period.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... RECORDKEEPING REQUIREMENTS APPLICABLE TO CRANBERRIES NOT SUBJECT TO THE CRANBERRY MARKETING ORDER § 926.5 Fiscal period. Fiscal period is synonymous with fiscal year and crop year and means the 12-month period... 7 Agriculture 8 2011-01-01 2011-01-01 false Fiscal period. 926.5 Section 926.5...

  2. 7 CFR 924.7 - Fiscal period.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... COUNTIES IN WASHINGTON AND IN UMATILLA COUNTY, OREGON Order Regulating Handling Definitions § 924.7 Fiscal period. Fiscal period is synonymous with fiscal year and means the 12-month period ending on March 31 of... 7 Agriculture 8 2011-01-01 2011-01-01 false Fiscal period. 924.7 Section 924.7...

  3. 7 CFR 926.5 - Fiscal period.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... RECORDKEEPING REQUIREMENTS APPLICABLE TO CRANBERRIES NOT SUBJECT TO THE CRANBERRY MARKETING ORDER § 926.5 Fiscal period. Fiscal period is synonymous with fiscal year and crop year and means the 12-month period... 7 Agriculture 8 2013-01-01 2013-01-01 false Fiscal period. 926.5 Section 926.5...

  4. 46 CFR 9.8 - Broken periods.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 1 2013-10-01 2013-10-01 false Broken periods. 9.8 Section 9.8 Shipping COAST GUARD... § 9.8 Broken periods. In computing extra compensation where the services rendered are in broken periods and less than 2 hours intervene between such broken periods the time served should be...

  5. 46 CFR 9.8 - Broken periods.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 1 2012-10-01 2012-10-01 false Broken periods. 9.8 Section 9.8 Shipping COAST GUARD... § 9.8 Broken periods. In computing extra compensation where the services rendered are in broken periods and less than 2 hours intervene between such broken periods the time served should be...

  6. 46 CFR 9.8 - Broken periods.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 1 2014-10-01 2014-10-01 false Broken periods. 9.8 Section 9.8 Shipping COAST GUARD... § 9.8 Broken periods. In computing extra compensation where the services rendered are in broken periods and less than 2 hours intervene between such broken periods the time served should be...

  7. 46 CFR 9.8 - Broken periods.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Broken periods. 9.8 Section 9.8 Shipping COAST GUARD... § 9.8 Broken periods. In computing extra compensation where the services rendered are in broken periods and less than 2 hours intervene between such broken periods the time served should be...

  8. 46 CFR 9.8 - Broken periods.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 1 2011-10-01 2011-10-01 false Broken periods. 9.8 Section 9.8 Shipping COAST GUARD... § 9.8 Broken periods. In computing extra compensation where the services rendered are in broken periods and less than 2 hours intervene between such broken periods the time served should be...

  9. Effect of lavender scent inhalation on prevention of stress, anxiety and depression in the postpartum period

    PubMed Central

    Kianpour, Maryam; Mansouri, Akram; Mehrabi, Tayebeh; Asghari, Gholamreza

    2016-01-01

    Background: Stress, anxiety, and postpartum depression are the most common problems among women in their childbearing age. Research has shown that aromatherapy administered during labor reduces anxiety in mothers. With regard to the specific biological conditions in postpartum period and the subsequent drop in hormone levels, this study investigated the effect of lavender on prevention of stress, anxiety, and postpartum depression in women. Materials and Methods: In a clinical trial, 140 women admitted to the obstetric and gynecological unit were randomly divided into aromatherapy and non-aromatherapy groups immediately after delivery. Intervention with aromatherapy consisted of inhaling three drops of lavender essential oil every 8 h with for 4 weeks. The control group received routine care after discharge and was followed up by telephone only. After 2 weeks, 1 and 3 months of delivery, women were assessed by the 21-item Depression, Anxiety, and Stress Scale and the Edinburgh stress, anxiety, and depression scale in the two groups. Data analysis was performed by Mann-Whitney, analysis of variance (ANOVA), and post hoc tests. Level of significance was set as 0.05 for all tests. Results: The results showed that the mean stress, anxiety, and depression at time point of 2 weeks (P = 0.012, P < 0.0001, and P = 0.003, respectively) and stress, anxiety, and depression scores at time points of 1 month (P < 0.0001) and 3 months after delivery (P < 0.0001) were significantly lower in the study group compared with the control group. Conclusions: Inhaling the scent of lavender for 4 weeks can prevent stress, anxiety, and depression after childbirth. PMID:27095995

  10. Epigenetics in the perioperative period

    PubMed Central

    Lirk, P; Fiegl, H; Weber, N C; Hollmann, M W

    2015-01-01

    The perioperative period is characterized by profound changes in the body's homoeostatic processes. This review seeks to address whether epigenetic mechanisms may influence an individual's reaction to surgery and anaesthesia. Evidence from animal and human studies suggests that epigenetic mechanisms can explain many facets of susceptibility to acute and chronic pain, making them potential therapeutic targets. Modern pain management is still based upon opiates, and both the developmental expression of opioid receptors and opioid-induced hyperalgesia have been linked to epigenetic mechanisms. In general, opiates seem to increase global DNA methylation levels. This is in contrast to local anaesthetics, which have been ascribed a global demethylating effect. Even though no direct investigations have been carried out, the potential influence of epigenetics on the inflammatory response that follows surgery seems a promising area for research. There is a considerable body of evidence that supports the involvement of epigenetics in the complex process of wound healing. Epigenetics is an important emerging research topic in perioperative medicine, with a huge potential to positively influence patient outcome. PMID:25073649

  11. Periodic motion near the surface of asteroids

    NASA Astrophysics Data System (ADS)

    Jiang, Yu; Baoyin, Hexi; Li, Hengnian

    2015-12-01

    We are interested in the periodic motion and bifurcations near the surface of an asteroid. The gravity field of an irregular asteroid and the equation of motion of a particle near the surface of an asteroid are studied. The periodic motions around the major body of triple asteroid 216 Kleopatra and the OSIRIS-REx mission target-asteroid 101955 Bennu are discussed. We find that motion near the surface of an irregular asteroid is quite different from the motion near the surface of a homoplastically spheroidal celestial body. The periodic motions around the asteroid 101955 Bennu and 216 Kleopatra indicate that the geometrical shapes of the orbits are probably very sophisticated. There exist both stable periodic motions and unstable periodic motions near the surface of the same irregular asteroid. This periodic motion which is unstable can be resonant or non-resonant. The period-doubling bifurcation and pseudo period-doubling bifurcation of periodic orbits coexist in the same gravity field of the primary of the triple asteroid 216 Kleopatra. It is found that both of the period-doubling bifurcations of periodic orbits and pseudo period-doubling bifurcation of periodic orbits have four different paths. The pseudo period-doubling bifurcation found in the potential field of primary of triple asteroid 216 Kleopatra shows that there exist stable periodic orbits near the primary's equatorial plane, which gives an explanation for the motion stability of the triple asteroid 216 Kleopatra's two moonlets, Alexhelios and Cleoselene.

  12. Man Made Elements Periodic Table, Astronomical Periodic Table, Geographic Periodic Table-Dimitri Mendeleev Imitation in the 21st Century

    NASA Astrophysics Data System (ADS)

    Struck, J.-T.

    2013-11-01

    A man made elements periodic table, including every single current element not just synthetic elements can be built differently than the naturally occurring element periodic table. Implications for knowing producible elements in space travel.

  13. Dearth of short-period Neptunian exoplanets: A desert in period-mass and period-radius planes

    NASA Astrophysics Data System (ADS)

    Mazeh, T.; Holczer, T.; Faigler, S.

    2016-05-01

    A few studies have reported a significant dearth of exoplanets with Neptune mass and radius with orbital periods below 2-4 d. This cannot be explained by observational biases because many Neptunian planets with longer orbital periods have been detected. The existence of this desert is similar to the appearance of the so-called brown-dwarf desert that suggests different formation mechanisms of planets and stellar companions with short orbital periods. Similarly, the Neptunian desert might indicate different mechanisms of formation and evolution for hot Jupiters and short-period super-Earths. We here follow a previous study and examine the location and shape of the desert in both the period-mass and period-radius planes, using the currently available large samples of planets. The desert in the period-mass plane has a relatively sharp upper edge, with a planetary mass that is inversely proportional to the planetary orbital period, while the lower, somewhat blurred, boundary is located along masses that are apparently linearly proportional to the period. The desert in the period-radius plane of the transiting planets is less clear. It seems as if the radius along the upper boundary is inversely proportional to the period to the power of one-third, while the lower boundary shows a radius that is proportional to the period to the power of two-thirds. The combination of the two upper bounds of the desert, in the period-mass and period-radius planes, yields a planetary mass-radius relation of Rp/RJup ≃ (1.2 ± 0.3)(Mp/MJup)0.27 ± 0.11 for 0.1 ≲ Mp/MJup ≲ 1. The derived shape of the desert, which might extend up to periods of 5-10 d, could shed some light on the formation and evolution of close-in planets.

  14. 7 CFR 1205.20 - Representative period.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 10 2010-01-01 2010-01-01 false Representative period. 1205.20 Section 1205.20 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING... period means the 2006 calendar year....

  15. Periodic behavior in a random environment.

    PubMed

    Broadbent, H A

    1994-04-01

    Animals' tendency to search periodically in temporally random environments was studied by presenting rats with random-interval (RI) 60-s and 120-s schedules. Power spectra revealed a periodicity of responding of 20-50 s for all animals regardless of condition. A second periodicity of 5-10-s was strongest under the RI 60-s schedule. Optimality theory suggests that periodic responding is better than random responding in obtaining food sooner on average, but the theory does not account for multiple periodicities. These multiple periodicities also cannot be explained by a single-oscillator, information-processing version of scalar expectancy theory (J. Gibbon & R. M. Church, 1992) or by the behavioral theory of timing (P.R. Killeen & J. G. Fetterman, 1988). The periodicities are consistent with a connectionist version of scalar expectancy theory that has nonscalar emergent properties, including multiple periodicities that are not proportional to the rate of random events.

  16. 25 CFR 140.11 - License period.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... is the owner or beneficial owner or holds a use right to the land on which the business is to be... land on which the business is to be conducted. The license period shall correspond to the period of...

  17. Continuing Diversity: A Column of Periodical Reviews.

    ERIC Educational Resources Information Center

    Juedes, D. R.

    1995-01-01

    Presents brief reviews of four periodicals that address diversity themes. Periodicals reviewed are: "Parabola: The Magazine of Myth and Traditions,""Race, Sex & Class: An Interdisciplinary Journal,""Third Force," and "Rhythm Music Magazine." Purchase information is included. (GR)

  18. 75 FR 65677 - Periodic Reporting Rules

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-10-26

    ... periodic reporting of service performance measurement for Applications and Mailing Permits, pursuant to... performance measurement reporting requirements. ADDRESSES: Submit comments electronically via the Commission's... Exception from Periodic Reporting of Service Performance Measurement, September 30, 2010 (Request); see...

  19. The two periods of TT ARIETIS

    NASA Astrophysics Data System (ADS)

    Thorstensen, J. R.; Smak, J.; Hessman, F. V.

    1985-05-01

    To clarify the spectroscopic period and demonstrate that the spectroscopic and photometric periods are distinct, velocities of the cataclysmic variable TT Ari in its high and intermediate photometric states are obtained. Evidence for periodicity is found near the period of Cowley et al. (1975) in both the high-state and intermediate-state velocities and in a reanalysis of the Cowley et al. velocities no evidence is found for periodicity near the photometric period. Since no single period fits all the data well and since the original Cowley et al. period fits all the high-state data quite well, it is shown that the velocities change phase between the high and the intermediate states. Results indicate that the intermediate-state velocities lag the high-state velocities by 0.28 of a cycle and that in the high-state data, the gamma velocities tend to be systematically lower for the high-order Balmer lines.

  20. 24 CFR 58.21 - Time periods.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 24 Housing and Urban Development 1 2014-04-01 2014-04-01 false Time periods. 58.21 Section 58.21...: Environmental Review Procedures § 58.21 Time periods. All time periods in this part shall be counted in calendar days. The first day of a time period begins at 12:01 a.m. local time on the day following...

  1. 24 CFR 58.21 - Time periods.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 24 Housing and Urban Development 1 2011-04-01 2011-04-01 false Time periods. 58.21 Section 58.21...: Environmental Review Procedures § 58.21 Time periods. All time periods in this part shall be counted in calendar days. The first day of a time period begins at 12:01 a.m. local time on the day following...

  2. 24 CFR 58.21 - Time periods.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 24 Housing and Urban Development 1 2012-04-01 2012-04-01 false Time periods. 58.21 Section 58.21...: Environmental Review Procedures § 58.21 Time periods. All time periods in this part shall be counted in calendar days. The first day of a time period begins at 12:01 a.m. local time on the day following...

  3. 24 CFR 58.21 - Time periods.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 24 Housing and Urban Development 1 2013-04-01 2013-04-01 false Time periods. 58.21 Section 58.21...: Environmental Review Procedures § 58.21 Time periods. All time periods in this part shall be counted in calendar days. The first day of a time period begins at 12:01 a.m. local time on the day following...

  4. 24 CFR 58.21 - Time periods.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Time periods. 58.21 Section 58.21...: Environmental Review Procedures § 58.21 Time periods. All time periods in this part shall be counted in calendar days. The first day of a time period begins at 12:01 a.m. local time on the day following...

  5. Study of gratings with variable periods

    NASA Astrophysics Data System (ADS)

    Olivares-Pérez, Arturo; Fuentes-Tapia, Israel; Toxqui-López, Santa; Ortiz-Gutiérrez, Mauricio; Ordoñez-Padilla, Manuel Jorge; Mejias-Brizuela, Nildia Y.

    2016-03-01

    A theoretical study with sinusoidal amplitude diffraction gratings, elaborated with variable periods is shown. The diffraction pattern behavior and the symmetry degree of the gratings were observed. The grating period is increased, fringe to fringe, starting with a small period and ending with a big period that is; the grating edge, start with high spatial frequency and finish with low spatial frequency. This gratings modulation causes a widening in the diffracted orders.

  6. Liftings and stresses for planar periodic frameworks

    PubMed Central

    Borcea, Ciprian; Streinu, Ileana

    2015-01-01

    We formulate and prove a periodic analog of Maxwell’s theorem relating stressed planar frameworks and their liftings to polyhedral surfaces with spherical topology. We use our lifting theorem to prove deformation and rigidity-theoretic properties for planar periodic pseudo-triangulations, generalizing features known for their finite counterparts. These properties are then applied to questions originating in mathematical crystallography and materials science, concerning planar periodic auxetic structures and ultrarigid periodic frameworks. PMID:26973370

  7. Inter-comparison of radon detectors for one to four week measurement periods.

    PubMed

    Gunning, G A; Murray, M; Long, S C; Foley, M J; Finch, E C

    2016-03-01

    Seven different types of radon detectors (Atmos 12 dpx, RAD7, RStone, Sun Nuclear 1028, Ramon 2.2, Canary and CR-39) were compared for exposure periods of 1, 2, 3 and 4 weeks. The comparison was conducted under two conditions: (a) in a purpose-built radon chamber with an average radon concentration of 2560 Bq m(-3) (b) in a home environment with a radon concentration of 57 Bq m(-3), in both cases measured by the reference detector (Atmos 12 dpx) with a  ±10% uncertainty range. In (a) 5 out of 8 detectors recorded radon concentrations within the Atmos uncertainty range and all detectors recorded within  ±15%; in (b) 3 out of 9 detectors recorded within the Atmos uncertainty range and 6 out of 9 measured within  ±20%, for a 4 week measurement. The results from this study show that radon surveys can be conducted for shorter periods than the recommended 3 months where a rapid indication is needed of whether the radon concentration is above the reference level, such as when assessing the concentration during and after remediation work.

  8. The development of Japanese mother-infant feeding interactions during the weaning period.

    PubMed

    Toyama, Noriko

    2014-05-01

    During the weaning period, infants are not skilled at self-feeding and caregivers play a prominent role in feeding. Solid feeding is therefore an inherently collaborative and interactive process between infants and caregivers. The present study examined how caregivers and infants coordinate their solid feeding interactions, based on naturalistic longitudinal observations of three Japanese mother-infant dyads. The main results were as follows. Four or five months after weaning (about 10-11 months of age), children's mouth movements and mothers' arm movements became more synchronized, and the success or failure of coordinated feeding became independent on children's gaze behavior. During this same period, both mothers' and children's body movements accelerated. Specifically, children's food-intake motions and mothers' food-carrying movements became faster together, although before 10-11 months fluctuations of these motions were not as correlated. Finally, at 9-11 months of age rhythmic body movements became frequent. From the first day of weaning, all three mothers swayed their bodies rhythmically while feeding, and about 2-3 months later their children also began to sway as they ate, at first infectiously but later spontaneously. These observations indicate how specific behavioral development contributes to mother-infant coordination in feeding.

  9. 40 CFR 35.538 - Project period.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 1 2013-07-01 2013-07-01 false Project period. 35.538 Section 35.538... ASSISTANCE Environmental Program Grants for Tribes Performance Partnership Grants § 35.538 Project period. If... that is added to a Performance Partnership Grant extends beyond the end of the project period for...

  10. 40 CFR 35.538 - Project period.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 1 2012-07-01 2012-07-01 false Project period. 35.538 Section 35.538... ASSISTANCE Environmental Program Grants for Tribes Performance Partnership Grants § 35.538 Project period. If... that is added to a Performance Partnership Grant extends beyond the end of the project period for...

  11. 40 CFR 35.538 - Project period.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 1 2014-07-01 2014-07-01 false Project period. 35.538 Section 35.538... ASSISTANCE Environmental Program Grants for Tribes Performance Partnership Grants § 35.538 Project period. If... that is added to a Performance Partnership Grant extends beyond the end of the project period for...

  12. 40 CFR 35.538 - Project period.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 1 2011-07-01 2011-07-01 false Project period. 35.538 Section 35.538... ASSISTANCE Environmental Program Grants for Tribes Performance Partnership Grants § 35.538 Project period. If... that is added to a Performance Partnership Grant extends beyond the end of the project period for...

  13. 7 CFR 1437.5 - Coverage period.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 10 2013-01-01 2013-01-01 false Coverage period. 1437.5 Section 1437.5 Agriculture... Provisions § 1437.5 Coverage period. (a) The coverage period is the time during which coverage is available against loss of production of the eligible crop as a result of natural disaster. (b) The coverage...

  14. Prebifurcation periodic ghost orbits in semiclassical quantization

    SciTech Connect

    Kus, M. ); Haake, F. ); Delande, D. )

    1993-10-04

    Classical periodic orbits are stationary-phase points in path integral representations of quantum propagators. We show that complex solutions of the stationary-phase equation, not corresponding to real classical periodic orbits, give additional contributions to the propagator which can be important, especially near bifurcations. We reveal the existence and relevance of such periodic ghost orbits for a kicked top.

  15. 21 CFR 573.240 - Calcium periodate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... DRUGS, FEEDS, AND RELATED PRODUCTS FOOD ADDITIVES PERMITTED IN FEED AND DRINKING WATER OF ANIMALS Food Additive Listing § 573.240 Calcium periodate. The food additive calcium periodate may be safely used in... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Calcium periodate. 573.240 Section 573.240...

  16. 21 CFR 573.240 - Calcium periodate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... DRUGS, FEEDS, AND RELATED PRODUCTS FOOD ADDITIVES PERMITTED IN FEED AND DRINKING WATER OF ANIMALS Food Additive Listing § 573.240 Calcium periodate. The food additive calcium periodate may be safely used in... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Calcium periodate. 573.240 Section 573.240...

  17. 21 CFR 573.240 - Calcium periodate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... DRUGS, FEEDS, AND RELATED PRODUCTS FOOD ADDITIVES PERMITTED IN FEED AND DRINKING WATER OF ANIMALS Food Additive Listing § 573.240 Calcium periodate. The food additive calcium periodate may be safely used in... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Calcium periodate. 573.240 Section 573.240...

  18. 21 CFR 573.240 - Calcium periodate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... DRUGS, FEEDS, AND RELATED PRODUCTS FOOD ADDITIVES PERMITTED IN FEED AND DRINKING WATER OF ANIMALS Food Additive Listing § 573.240 Calcium periodate. The food additive calcium periodate may be safely used in... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Calcium periodate. 573.240 Section 573.240...

  19. 21 CFR 573.240 - Calcium periodate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... DRUGS, FEEDS, AND RELATED PRODUCTS FOOD ADDITIVES PERMITTED IN FEED AND DRINKING WATER OF ANIMALS Food Additive Listing § 573.240 Calcium periodate. The food additive calcium periodate may be safely used in... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Calcium periodate. 573.240 Section 573.240...

  20. 40 CFR 46.195 - Project period.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Project period. 46.195 Section 46.195... During the Fellowship § 46.195 Project period. Based on the “Date Fellow Will Enter on Duty” which you enter on the Activation Notice (see § 46.185(a)), EPA will establish the project period for...

  1. 30 CFR 725.14 - Grant periods.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 3 2011-07-01 2011-07-01 false Grant periods. 725.14 Section 725.14 Mineral... REGULATIONS REIMBURSEMENTS TO STATES § 725.14 Grant periods. The Director or his authorized designee shall normally approve a grant for a period of one year or less. OSM shall fund a program that extends over...

  2. 49 CFR 236.588 - Periodic test.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Periodic test. 236.588 Section 236.588..., Train Control and Cab Signal Systems Inspection and Tests; Locomotive § 236.588 Periodic test. Except as provided in § 236.586, periodic test of the automatic train stop, train control, or cab signal...

  3. 47 CFR 22.1035 - Construction period.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 47 Telecommunication 2 2010-10-01 2010-10-01 false Construction period. 22.1035 Section 22.1035 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES PUBLIC MOBILE SERVICES Offshore Radiotelephone Service § 22.1035 Construction period. The construction period (see § 22.142)...

  4. 30 CFR 725.14 - Grant periods.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Grant periods. 725.14 Section 725.14 Mineral... REGULATIONS REIMBURSEMENTS TO STATES § 725.14 Grant periods. The Director or his authorized designee shall normally approve a grant for a period of one year or less. OSM shall fund a program that extends over...

  5. 30 CFR 887.13 - Grant period.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... remaining at the end of any grant period to us according to 43 CFR part 12. ... 30 Mineral Resources 3 2012-07-01 2012-07-01 false Grant period. 887.13 Section 887.13 Mineral... LAND RECLAMATION SUBSIDENCE INSURANCE PROGRAM GRANTS § 887.13 Grant period. The grant funding...

  6. 30 CFR 887.13 - Grant period.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... remaining at the end of any grant period to us according to 43 CFR part 12. ... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Grant period. 887.13 Section 887.13 Mineral... LAND RECLAMATION SUBSIDENCE INSURANCE PROGRAM GRANTS § 887.13 Grant period. The grant funding...

  7. 30 CFR 725.14 - Grant periods.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 3 2012-07-01 2012-07-01 false Grant periods. 725.14 Section 725.14 Mineral... REGULATIONS REIMBURSEMENTS TO STATES § 725.14 Grant periods. The Director or his authorized designee shall normally approve a grant for a period of one year or less. OSM shall fund a program that extends over...

  8. 39 CFR 3055.55 - Periodicals.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 39 Postal Service 1 2011-07-01 2011-07-01 false Periodicals. 3055.55 Section 3055.55 Postal Service POSTAL REGULATORY COMMISSION PERSONNEL SERVICE PERFORMANCE AND CUSTOMER SATISFACTION REPORTING Periodic Reporting of Service Performance Achievements § 3055.55 Periodicals. (a) Within County...

  9. 12 CFR 226.7 - Periodic statement.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... and Banking FEDERAL RESERVE SYSTEM (CONTINUED) BOARD OF GOVERNORS OF THE FEDERAL RESERVE SYSTEM TRUTH... periodic rates apply to different types of transactions, the types of transactions to which the periodic... amount(s) of any other type of finance charge. If there is more than one periodic rate, the amount of...

  10. 7 CFR 1230.621 - Voting period.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE PORK PROMOTION, RESEARCH, AND CONSUMER INFORMATION Procedures for the Conduct of Referendum Definitions § 1230.621 Voting period. The term Voting period means the 3-consecutive business day period for in-person voting. Referendum...

  11. 7 CFR 1230.621 - Voting period.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE PORK PROMOTION, RESEARCH, AND CONSUMER INFORMATION Procedures for the Conduct of Referendum Definitions § 1230.621 Voting period. The term Voting period means the 3-consecutive business day period for in-person voting. Referendum...

  12. 32 CFR 552.80 - Suspension period.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 32 National Defense 3 2010-07-01 2010-07-01 true Suspension period. 552.80 Section 552.80 National... Suspension period. All solicitation privileges suspended by installation commanders will be for a specific time. Normally, it will not exceed 2 years. When the suspension period expires, the agent may...

  13. 32 CFR 552.80 - Suspension period.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 32 National Defense 3 2011-07-01 2009-07-01 true Suspension period. 552.80 Section 552.80 National... Suspension period. All solicitation privileges suspended by installation commanders will be for a specific time. Normally, it will not exceed 2 years. When the suspension period expires, the agent may...

  14. 5 CFR 9901.411 - Appraisal period.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ....411 Administrative Personnel DEPARTMENT OF DEFENSE HUMAN RESOURCES MANAGEMENT AND LABOR RELATIONS... PERSONNEL SYSTEM (NSPS) Performance Management § 9901.411 Appraisal period. (a) Except as provided in... period, an employee has not met the minimum period of performance, management may extend the...

  15. 10 CFR 603.1295 - Periodic audit.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Periodic audit. 603.1295 Section 603.1295 Energy... Used in this Part § 603.1295 Periodic audit. An audit of a participant, performed at an agreed-upon... an audit may cover. A periodic audit of a participant differs from an award-specific audit of...

  16. 32 CFR 37.1325 - Periodic audit.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 32 National Defense 1 2010-07-01 2010-07-01 false Periodic audit. 37.1325 Section 37.1325 National... TECHNOLOGY INVESTMENT AGREEMENTS Definitions of Terms Used in This Part § 37.1325 Periodic audit. An audit of... awards. Appendix C to this part describes what such an audit may cover. A periodic audit of a...

  17. 40 CFR 35.108 - Funding period.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 1 2013-07-01 2013-07-01 false Funding period. 35.108 Section 35.108... ASSISTANCE Environmental Program Grants Preparing An Application § 35.108 Funding period. The Regional Administrator and applicant may negotiate the length of the funding period for environmental program...

  18. 40 CFR 35.508 - Funding period.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 1 2012-07-01 2012-07-01 false Funding period. 35.508 Section 35.508... ASSISTANCE Environmental Program Grants for Tribes Preparing An Application § 35.508 Funding period. The Regional Administrator and applicant may negotiate the length of the funding period for...

  19. 40 CFR 35.108 - Funding period.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 1 2012-07-01 2012-07-01 false Funding period. 35.108 Section 35.108... ASSISTANCE Environmental Program Grants Preparing An Application § 35.108 Funding period. The Regional Administrator and applicant may negotiate the length of the funding period for environmental program...

  20. 40 CFR 35.508 - Funding period.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 1 2013-07-01 2013-07-01 false Funding period. 35.508 Section 35.508... ASSISTANCE Environmental Program Grants for Tribes Preparing An Application § 35.508 Funding period. The Regional Administrator and applicant may negotiate the length of the funding period for...