Science.gov

Sample records for 3-trimethoxysilyl propyl methacrylate

  1. Infrared and Raman spectroscopic studies of tris-[3-(trimethoxysilyl)propyl] isocyanurate, its sol-gel process, and coating on aluminum and copper.

    PubMed

    Li, Ying-Sing; Church, Jeffrey S; Woodhead, Andrea L; Vecchio, Nicolas E; Yang, Johnny

    2014-11-11

    Tris-[3-(trimethoxysilyl)propyl] isocyanurate (TTPI) has been used as a precursor to prepare a sol using ethanol as the solvent under acidic conditions. The sol-gel was applied for the surface treatment of aluminum and copper. Infrared and Raman spectra have been recorded for pure TTPI and the TTPI sol, xerogel and TTPI sol-gel coated metals. From the vibrational spectra, TTPI is likely to have the C1 point group. Vibrational assignments are suggested based on group frequencies, the expected reactions in the sol-gel process and the vibrational studies of some related molecules. From the experimental infrared spectra of xerogels annealed at different temperatures and from the thermal-gravimetric analysis, it is found that the TTPI xerogel decomposes at around 450°C with silica being the major decomposition product. A cyclic voltammetric study of the metal electrodes coated with different concentrations of TTPI ranging from 5% to 42% (v/v) has shown that the films with high concentrations of sol would provide better corrosion protection for aluminum and copper.

  2. Preparation and characterization of alkyl methacrylate-based monolithic columns for capillary gas chromatography applications.

    PubMed

    Yusuf, Kareem; Aqel, Ahmad; A L Othman, Zeid; Badjah-Hadj-Ahmed, Ahmed Yacine

    2013-08-01

    Gas chromatography (GC) is considered the least common application of both polymer and silica-based monolithic columns. This study describes the fabrication of alkyl methacrylate monolithic materials for use as stationary phases in capillary gas chromatography. Following the deactivation of the capillary surface with 3-(trimethoxysilyl)propyl methacrylate (TMSM), the monoliths were formed by the co-polymerization of either hexyl methacrylate (HMA) or lauryl methacrylate (LMA) with different percentage of ethylene glycol dimethacrylate (EDMA) in presence of an initiator (azobisisobutyronitrile, AIBN) and a mixture of porogens include 1-propanol, 1,4-butanediol and water. The monoliths were prepared in 500mm length capillaries possessing inner diameters of 250μm. The efficiencies of the monolithic columns for low molecular weight compounds significantly improved as the percentage of crosslinker was increased, because of the greater proportion of pores less than 50nm. The columns containing lower percentages of crosslinker were able to rapidly separate a series of 8 alkane members in 0.7min, but the separation was less efficient for the light alkanes. Columns prepared with the lauryl methacrylate monomer yielded a different morphology for the monolith-interconnected channels. The channels were more branched, which increased the separation time, and unlike the other columns, allowed for temperature programming.

  3. UV-curable nanocomposite based on methacrylic-siloxane resin and surface-modified TiO2 nanocrystals.

    PubMed

    Ingrosso, Chiara; Esposito Corcione, Carola; Striani, Raffaella; Comparelli, Roberto; Striccoli, Marinella; Agostiano, Angela; Curri, M Lucia; Frigione, Mariaenrica

    2015-07-22

    A novel UV-light-curable nanocomposite material formed of a methacrylic-siloxane resin loaded with 1 wt % oleic acid and 3-(trimethoxysilyl)propyl methacrylate silane (OLEA/MEMO)-coated TiO2 nanorods (NRs) has been manufactured as a potential self-curing structural coating material for protection of monuments and artworks, optical elements, and dental components. OLEA-coated TiO2 NRs, presynthesized by a colloidal chemistry route, have been surface-modified by a treatment with the methacrylic-based silane coupling agent MEMO. The resulting OLEA/MEMO-capped TiO2 NRs have been dispersed in MEMO; that is a monomer precursor of the organic formulation, used as a "common solvent" for transferring the NRs in prepolymer components of the formulation. Differential scanning calorimetry and Fourier transform infrared spectroscopy have allowed investigation of the effects of the incorporation of the OLEA/MEMO-capped TiO2 NRs on reactivity and photopolymerization kinetics of the nanocomposite, demonstrating that the embedded NRs significantly increase curing reactivity of the neat organic formulation both in air and inert atmosphere. Such a result has been explained on the basis of the photoactivity of the nanocrystalline TiO2 which behaves as a free-radical donor photocatalyst in the curing reaction, finally turning out more effective than the commonly used commercial photoinitiator. Namely, the NRs have been found to accelerate the cure rate and increase cross-linking density, promoting multiple covalent bonds between the resin prepolymers and the NR ligand molecules, and, moreover, they limit inhibition effect of oxygen on photopolymerization. The NRs distribute uniformly in the photocurable matrix, as assessed by transmission electron microscopy analysis, and increase glass transition temperature and water contact angle of the nanocomposite with respect to the neat resin. PMID:26151152

  4. Biomimetically-mineralized composite coatings on titanium functionalized with gelatin methacrylate hydrogels

    NASA Astrophysics Data System (ADS)

    Tan, Guoxin; Zhou, Lei; Ning, Chengyun; Tan, Ying; Ni, Guoxin; Liao, Jingwen; Yu, Peng; Chen, Xiaofeng

    2013-08-01

    Immobilizing organic-inorganic hybrid composites onto the implant surface is a promising strategy to improve host acceptance of the implant. The objective of this present study was to obtain a unique macroporous titanium-surface with the organic-mineral composite coatings consisting of gelatin methacrylate hydrogel (GelMA) and hydroxyapatite (HA). A 3-(trimethoxysilyl) propyl methacrylate (TMSPMA) layer was first coated onto the titanium surface, and surface was then covalently functionalized with GelMA using a photochemical method. Mineralization of the GelMA coating on the titanium surface was subsequently carried out by a biomimetic method. After 3-day mineralization, a large number of mineral phases comprising spherical amorphous nanoparticles were found randomly deposited inside GelMA matrix. The resulting mineralized hydrogel composites exhibited a unique rough surface of macroporous structure. The structure of the prepared GelMA/HA composite coating was studied by field emission scanning electron microscopy (FESEM), energy dispersive X-ray spectra (EDS), attenuated total refraction Fourier transform infrared spectroscopy (ATR-FTIR), X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD). Water contact angle measurement revealed the hydrophilicity properties of composite coatings. GelMA/HA on titanium after the TMSPMA treatment is very stable when tested in vitro with a PBS solution at 37 °C, due to the role of TMSPMA as a molecular bridge. It was expected that the macroporous GelMA/HA composite coatings might potentially promote and accelerate titanium (Ti)-based implants osseointegration for bone repair and regeneration.

  5. Solubility parameter of poly(propyl methacrylate)

    NASA Astrophysics Data System (ADS)

    Wohlfarth, Ch.

    This document is part of Subvolume D2 'Polymer Solutions - Physical Properties and their Relations I (Thermodynamic Properties: PVT -Data and miscellaneous Properties of polymer Solutions) of Volume 6 `Polymers' of Landolt-Börnstein - Group VIII `Advanced Materials and Technologies'.

  6. FT-IR SOLUTION SPECTRA OF PROPYL SULFIDE, PROPYL SULFOXIDE, AND PROPYL SULFONE

    EPA Science Inventory

    FT-IR spectra were obtained of 0.5% volumetric solutions of propyl sulfide, propyl sulfoxide, and propyl sulfone in hexane, CCl4, CS2, and CHCl3 to assist in the assignment of FT-IR-PAS spectra of propyl sulfoxide sorbed within the structure of several peats and onto cellulose. T...

  7. Solid phase extraction of trace amounts of silver, cadmium, copper, mercury, and lead in various food samples based on ethylene glycol bis-mercaptoacetate modified 3-(trimethoxysilyl)-1-propanethiol coated Fe3O4 nanoparticles.

    PubMed

    Mashhadizadeh, Mohammad Hossein; Amoli-Diva, Mitra; Shapouri, Mahmoud Reza; Afruzi, Hossein

    2014-05-15

    Extraction, pre-concentration, and determination of trace amounts of silver, cadmium, copper, mercury, and lead from some food samples were investigated by magnetic solid phase extraction using Fe3O4 nanoparticles coated with 3-(trimethoxysilyl)-1-propanethiol and modified with ethylene glycol bis-mercaptoacetate as a new adsorbent. SEM, X-ray diffraction, and FT-IR were used to characterise the adsorbent. Metal ions were measured using ICP-OES, except for mercury, which was determined by CV-AAS method. Various factors affecting the extraction and desorption of target metal ions were investigated. 1 mL of 1 mol/L HCl and 5% thiourea was used as eluent. The detection limits of 0.07, 0.06, 0.09, 0.01, and 0.08 ng/mL were obtained for silver, cadmium, copper, mercury, and lead with enrichment factors of 240, 294, 297, 291, and 236, respectively. The method was used for determination of target metal ions in rice, canned tuna fish, and tea leaves. PMID:24423536

  8. Ammonium methacrylate

    Integrated Risk Information System (IRIS)

    Ammonium methacrylate ; CASRN 16325 - 47 - 6 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarcin

  9. Methyl methacrylate

    Integrated Risk Information System (IRIS)

    Methyl methacrylate ; CASRN 80 - 62 - 6 ( 03 / 02 / 98 ) Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments f

  10. SWELLING OF PEATS IN LIQUID METHYL, TETRAMETHYLENE AND PROPYL SULFOXIDES AND IN LIQUID PROPYL SULFONE

    EPA Science Inventory

    The interactions of methyl, tetramethylene, and propyl sulfoxides and propyl sulfone during sorption onto four de-waxed, acid-form peats have been studied by means of swelling measurements. The results for sulfoxides are displayed as het-eromolecular sorption isotherms, which plo...

  11. Synthesis, characterization and molecular dynamic simulation on dendronized poly(diphtalimidoalky phenyl) methacrylates

    NASA Astrophysics Data System (ADS)

    Radić, D.; Alegría, L.; Sandoval, C.; Gargallo, L.

    2012-07-01

    Dendronized methacrylates containing 3,5-diphtalimido alkylphenyl moieties with ethyl (M-EthylG1), propyl (M-PropylG1) and butyl (M-ButylG1) spacer groups were synthesized. Monomers of the first generation were polymerized by radical polymerization using AIBN as initiator. The corresponding polymers (P-EthylG1), (P-PropylG1) and (P-ButylG1) were obtained. Monomers and polymers were characterized by 1H-NMR, 13C-NMR, FTIR spectroscopic measurements. Molecular weight was estimated by following the nitrogen content in the obtained polymers. Molecular Dynamic Simulation (MDS) was performed in order to evaluate the radius of gyration (Rg) and the end-to-end distance (ree) to estimate the stiffness of the backbone and of the dendrimers. According to the conformational analysis it is possible to observe different spacial arrangements depending on the length of the spacer group.

  12. 21 CFR 573.880 - Normal propyl alcohol.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Normal propyl alcohol. 573.880 Section 573.880 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additive Listing § 573.880 Normal propyl alcohol. Normal propyl alcohol may be safely used in feeds...

  13. 21 CFR 573.880 - Normal propyl alcohol.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Normal propyl alcohol. 573.880 Section 573.880 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additive Listing § 573.880 Normal propyl alcohol. Normal propyl alcohol may be safely used in feeds...

  14. 21 CFR 573.880 - Normal propyl alcohol.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Normal propyl alcohol. 573.880 Section 573.880 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additive Listing § 573.880 Normal propyl alcohol. Normal propyl alcohol may be safely used in feeds...

  15. 21 CFR 573.880 - Normal propyl alcohol.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Normal propyl alcohol. 573.880 Section 573.880 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additive Listing § 573.880 Normal propyl alcohol. Normal propyl alcohol may be safely used in feeds...

  16. 21 CFR 573.880 - Normal propyl alcohol.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Normal propyl alcohol. 573.880 Section 573.880 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additive Listing § 573.880 Normal propyl alcohol. Normal propyl alcohol may be safely used in feeds...

  17. 21 CFR 582.3660 - Propyl gallate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Propyl gallate. 582.3660 Section 582.3660 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Chemical Preservatives §...

  18. Thermoforming polymethyl methacrylate.

    PubMed

    Jagger, R G; Okdeh, A

    1995-11-01

    This study characterized a range of commercially available polymethyl methacrylate sheets with respect to molecular weight, residual monomer content, and glass transition temperature and then developed a thermoforming procedure that produced visually satisfactory thermoformed polymethyl methacrylate specimens. Molecular weight values of Perspex material were considerably greater than those of the other materials. All materials but Diakon had residual monomer concentrations of less than 1% and glass transition temperature values greater than 100 degrees C. Perspex material was selected for further investigation. It was necessary to preheat Perspex sheets in an oven at 160 degrees C for at least 30 minutes before heating and forming on the thermoforming apparatus to obtain acceptable specimens.

  19. Contact depigmentation induced by propyl gallate.

    PubMed

    Pandhi, D; Vij, A; Singal, A

    2011-06-01

    We report a 41-year-old woman who developed contact depigmentation at several body sites after using lipstick, liquid kumkum (a colouring usually made from turmeric or saffron used for social/religious markings), and plastic or rubber slippers (flip-flops). Propyl gallate, a common ingredient to all and a previously undocumented depigmenting agent, was incriminated on patch testing with the Indian standard series. PMID:21564173

  20. Colon-specific drug delivery behavior of pH-responsive PMAA/perlite composite.

    PubMed

    Mahkam, Mehrdad; Vakhshouri, Laleh

    2010-04-12

    The preparation, characterization, and in vitro release of 5-aminosalicylic acid (5-ASA) from methacrylic acid (MAA)/perlite composites (APC) prepared via a sol-gel route are reported. The free-radical graft polymerization of methacrylic acid (MAA) onto perlite particles was studied experimentally. The grafting procedure consisted of surface activation with 3-(trimethoxysilyl) propyl methacrylate (TSPA), followed by free-radical graft polymerization of methacrylic acid (MAA) in ethyl acetate with 2,2'-azobisisobutyronitrile (AIBN) initiator. The composition of the composites hybrid materials was determined by FTIR spectroscopy. Equilibrium swelling studies were carried out in enzyme-free simulated gastric and intestinal fluids (SGF and SIF, respectively). The dried composites were immersed in a saturated solution of 5-ASA in water overnight and dried over a period of three days at room temperature and the in vitro release profiles were established separately in both (SGF, pH 1) and (SIF, pH 7.4). The 5-ASA concentration of the solution was measured using a UV-Vis spectrophotometer (205 nm) at different time intervals. The in vitro drug release test revealed that the release rate of 5-ASA in buffer solutions increased with the silica content in the composites; on the contrary, the increase of the content of 3-(trimethoxysilyl)propyl methacrylate (TSPA), a coupling agent, decreased the drug release rate.

  1. Synthesis, Characterization, and In Vitro Evaluation of New Ibuprofen Polymeric Prodrugs Based on 2-Hydroxypropyl Methacrylate

    PubMed Central

    Babazadeh, Mirzaagha; Sheidaei, Maryam; Abbaspour, Sara; Edjlali, Ladan

    2013-01-01

    The present research work describes the synthesis and evaluation of new acrylic-type polymeric systems having degradable ester bonds linked to ibuprofen as materials for drug delivery. Ibuprofen was linked to 2-hydroxy-propyl methacrylate by an activated ester methodology in a one-pot procedure with a high yield. The resulting material was copolymerized with either 2-hydroxyethyl methacrylate or methyl methacrylate (in 1:3 mole ratios) by the free radical polymerization method, utilizing azoisobutyronitrile at 65–70 °C. The characterization of the resulting products by FTIR, 1H NMR, 13C NMR, DSC, and elemental analysis confirmed their synthesis successfully. Ibuprofen release from the obtained polymers was preliminarily evaluated at different buffered solutions (pH 1, 7.4, and 10) into dialysis bags to show the capacity of prodrugs to release the drug under hydrolytic conditions. Detection of hydrolysis by UV spectroscopy at selected intervals showed that the drug can be released by selective hydrolysis of the ester bond at the side of the drug moiety. The release profiles indicated that the hydrolytic behavior of polymers is strongly based on the polymer hydrophilicity and the pH value of the hydrolysis solution. The results suggest that these polymers could be useful in controlled release systems. PMID:23641345

  2. Chemical modification of nanometric TiO2 particles by anchoring functional silane molecules in supercritical CO2

    NASA Astrophysics Data System (ADS)

    López-Periago, Ana M.; Sandoval, Wendy; Domingo, Concepción

    2014-03-01

    Supercritical carbon dioxide (scCO2) was used as a green solvent for the grafting of complex functional organosilanes containing nitrogen moieties on titanium dioxide (TiO2) nanoparticles using two strategies. The first strategy involved the preparation of two functional silanes, 4-nitrophenyl-(3-(trimethoxysilyl)-propyl)methanimine (NPTMS) and 4-(((3-(trimethoxysilyl)propyl)imino)methyl)-benzaldehyde (FPTMS) and further deposited under anhydrous conditions and scCO2 onto the TiO2 surface. The second strategy involved the scCO2 anhydrous deposition of bifunctional commercial silanes on the TiO2 surface. Two structures were synthesized. The first consisted in grafted TiO2 nanoparticles prepared by addition of the ligand, ((1R,2R)-N-(pyridin-2-ylmethyl)-2-(((E)-pyridin-2-ylmethylene) amino)-cyclohexan-1-amine (LPy-red), and designated as Ti-Cl-LPy-red. The second structure was synthesized by the reaction of (1,2)-diaminocylohexane (Dac), through the reactive site of 3-(Trimethoxysilyl)propyl methacrylate (MPTMS) previously deposited on the TiO2 surface and designated as Ti-MP-Dac. The synthesized silanes were characterized by ATR-FT and NMR spectroscopies and mass spectrometry. ATR-FT spectroscopy confirmed the presence of the silanes on the surface of the hybrid nanoparticles. Thermogravimetic analysis was used to estimate the loading of the silane grafted through both hydrogen and covalent bonding on the TiO2 surface. Further characterization of the solid samples was done by N2 adsorption-desorption and UV-vis diffuse reflectance.

  3. 40 CFR 721.10153 - Modified methyl methacrylate, 2-hydroxyethyl methacrylate polymer (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ...-hydroxyethyl methacrylate polymer (generic). 721.10153 Section 721.10153 Protection of Environment...-hydroxyethyl methacrylate polymer (generic). (a) Chemical substance and significant new uses subject to... methacrylate polymer (PMN P-08-6) is subject to reporting under this section for the significant new...

  4. 40 CFR 721.10153 - Modified methyl methacrylate, 2-hydroxyethyl methacrylate polymer (generic).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ...-hydroxyethyl methacrylate polymer (generic). 721.10153 Section 721.10153 Protection of Environment...-hydroxyethyl methacrylate polymer (generic). (a) Chemical substance and significant new uses subject to... methacrylate polymer (PMN P-08-6) is subject to reporting under this section for the significant new...

  5. 40 CFR 721.9492 - Polymers of styrene, cyclohexyl methacrylate and substituted methacrylate.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Polymers of styrene, cyclohexyl... Significant New Uses for Specific Chemical Substances § 721.9492 Polymers of styrene, cyclohexyl methacrylate... generically as polymers of styrene, cyclohexyl methacrylate and substituted methacrylate (PMNs...

  6. 40 CFR 721.10153 - Modified methyl methacrylate, 2-hydroxyethyl methacrylate polymer (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ...-hydroxyethyl methacrylate polymer (generic). 721.10153 Section 721.10153 Protection of Environment...-hydroxyethyl methacrylate polymer (generic). (a) Chemical substance and significant new uses subject to... methacrylate polymer (PMN P-08-6) is subject to reporting under this section for the significant new...

  7. 40 CFR 721.10153 - Modified methyl methacrylate, 2-hydroxyethyl methacrylate polymer (generic).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...-hydroxyethyl methacrylate polymer (generic). 721.10153 Section 721.10153 Protection of Environment...-hydroxyethyl methacrylate polymer (generic). (a) Chemical substance and significant new uses subject to... methacrylate polymer (PMN P-08-6) is subject to reporting under this section for the significant new...

  8. 40 CFR 721.10153 - Modified methyl methacrylate, 2-hydroxyethyl methacrylate polymer (generic).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...-hydroxyethyl methacrylate polymer (generic). 721.10153 Section 721.10153 Protection of Environment...-hydroxyethyl methacrylate polymer (generic). (a) Chemical substance and significant new uses subject to... methacrylate polymer (PMN P-08-6) is subject to reporting under this section for the significant new...

  9. Phase holograms in polymethyl methacrylate

    NASA Technical Reports Server (NTRS)

    Maker, P. D.; Muller, R. E.

    1992-01-01

    A procedure is described for the fabrication of complex computer-generated phase holograms in polymethyl methacrylate (PMMA) by means of partial-exposure e-beam lithography and subsequent carefully controlled partial development. Following the development, the pattern appears (rendered in relief) in the PMMA, which then acts as the phase-delay medium. The devices fabricated were designed with 16 equal phase steps per retardation cycle, were up to 3 mm square, and consisted of up to 10 millions of 0.3-2.0-micron square pixels. Data files were up to 60 Mb-long, and the exposure times ranged to several hours. A Fresnel phase lens was fabricated with a diffraction-limited optical performance of 83-percent efficiency.

  10. Luminescent SiO 2-coated Gd 2O 3:Eu 3+ nanorods/poly(styrene) nanocomposites by in situ polymerization

    NASA Astrophysics Data System (ADS)

    Macedo, Andreia G.; Martins, Manuel A.; Fernandes, Sílvia E. M.; Barros-Timmons, Ana; Trindade, Tito; Carlos, Luís D.; Rocha, João

    2010-10-01

    Europium doped gadolinium oxide nanorods have been coated with silica via a sol-gel approach. The silica coating increases the Eu 3+ absolute emission quantum yields from 0.51 to 0.86 (255 nm excitation) and decay times from 1.43 to 1.80 ms (394.4 nm excitation). Subsequently the silica coating was modified with 3-(trimethoxysilyl)-propyl-methacrylate. Grafting of silica with the MPS coupling agent was confirmed by FTIR and contact angle measurements. The functionalized nanoparticles were used as core structures in the in situ radical polymerization of styrene via miniemulsion and solution routes. Depending on the polymerization technique used the morphology of the polymer coating consisted in isolated spheres or a homogenous film respectively. Although the optical properties of the ensuing nanocomposites were reduced the synthetic strategy developed to process this type of luminescent nanoparticles proved efficient and can be explored using different vinyl or (meth)acrylate monomers.

  11. 21 CFR 172.775 - Methacrylic acid-divinylbenzene copolymer.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Methacrylic acid-divinylbenzene copolymer. 172.775... Additives § 172.775 Methacrylic acid-divinylbenzene copolymer. Methacrylic acid-divinylbenzene copolymer may... produced by the polymerization of methacrylic acid and divinylbenzene. The divinylbenzene functions as...

  12. Methacrylated glycol chitosan as a photopolymerizable biomaterial.

    PubMed

    Amsden, Brian G; Sukarto, Abby; Knight, Darryl K; Shapka, Stephen N

    2007-12-01

    Glycol chitosan is a derivative of chitosan that is soluble at neutral pH and possesses potentially useful biological properties. With the goal of obtaining biocompatible hydrogels for use as tissue engineering scaffolds or drug delivery depots, glycol chitosan was converted to a photopolymerizable prepolymer through graft methacrylation using glycidyl methacrylate in aqueous media at pH 9. N-Methacrylation was verified by both (1)H NMR and (13)C NMR. The degree of N-methacrylation, measured via (1)H NMR, was easily varied from 1.5% to approximately 25% by varying the molar ratio of glycidyl methacrylate to glycol chitosan and the reaction time. Using a chondrocyte cell line, the N-methacrylated glycol chitosan was found to be noncytotoxic up to a concentration of 1 mg/mL. The prepolymer was cross-linked in solution using UV light and Irgacure 2959 photoinitiator under various conditions to yield gels of low sol content ( approximately 5%), high equilibrium water content (85-95%), and thicknesses of up to 6 mm. Cross-polarization magic-angle spinning (13)C solid state NMR verified the complete conversion of the double bonds in the gel. Chondrocytes seeded directly onto the gel surface, populated the entirety of the gel and remained viable for up to one week. The hydrogels degraded slowly in vitro in the presence of lysozyme at a rate that increased as the cross-link density of the gels decreased. PMID:18031015

  13. Photolithography with polymethyl methacrylate (PMMA)

    NASA Astrophysics Data System (ADS)

    Carbaugh, Daniel J.; Wright, Jason T.; Parthiban, Rajan; Rahman, Faiz

    2016-02-01

    Polymethyl methacrylate (PMMA) is widely used as an electron beam resist but is not used as a photoresist because of its insensitivity to electromagnetic radiation with wavelengths longer than about 300 nm. In this paper we describe a technique for performing conventional photolithography with high molecular weight PMMA at the widely used 365 nm i-line wavelength. The technique involves photosensitizing PMMA with Irgacure 651—a commercially available photo-initiator that can cause PMMA strands to cross-link. Optimum amount of Irgacure can produce a negative tone photoresist with adequate photosensitivity and plasma etch resistance. We describe this technique in detail with complete processing conditions and discuss the effects of varying Irgacure 651 concentration in PMMA as well as changes in UV exposure dose. We also show example structures patterned with commonly available materials and equipment. Finally, we show that it is possible to carry out gradient lithography with this approach, in order to produce structures in relief in photosensitive PMMA.

  14. Polymethyl methacrylate microspheres in collagen.

    PubMed

    Haneke, Eckart

    2004-12-01

    Artecoll was developed about 20 years ago and underwent a number of production changes until it recently became FDA approved under the new name of Artefill. This product contains 20% polymethyl methacrylate (PMMA) microspheres with a diameter of 30 to 40 microm, which are suspended in a 3.5% atelo-collagen solution. The PMMA microspheres are now purified and no longer have an electrostatic charge, which in part was the cause for the early granulomatous reactions. Further, PMMA has long been known as bone cement and has been used in cosmetic surgery with a very good safety record. PMMA microspheres are biologically inert and nondegradable. The treatment results are therefore permanent and technical errors as well as incorrect injections will last. Due to the early record of granuloma formation, there is still a debate as to whether this product-as well as all other permanent fillers-should be injected for cosmetic reasons or not. With proper indications, excellent injection techniques, and realistic expectations as to what can be expected, this product has now proved to be one of the superior permanent filler substances.

  15. Infrared Laser Spectroscopy of the n-PROPYL and i-PROPYL Radicals in Helium Droplets: Significant Bend-Stretch Coupling Revealed in the CH Stretch Region

    NASA Astrophysics Data System (ADS)

    Moradi, Christopher P.; Douberly, Gary E.; Tabor, Daniel P.; Sibert, Edwin

    2016-06-01

    The n-propyl and i-propyl radicals were generated in the gas phase via pyrolysis of n-butyl nitrite (CH3(CH2)3ONO) and i-butyl nitrite (CH3CH(CH3)CH2ONO) precursors, respectively. Nascent radicals were promptly solvated by a beam of He nanodroplets, and the infrared spectra of the radicals were recorded in the C-H stretching region. In addition to three vibrations of n-propyl previously measured in an Ar matrix, we observe many unreported bands between 2800 and 3150 wn, which we attribute to propyl radicals. The C-H stretching modes observed above 2960 wn for both radicals are in excellent agreement with anharmonic frequencies computed using VPT2. Between 2800 and 2960 wn, however, the spectra of n-propyl and i-propyl radicals become quite congested and difficult to assign due to the presence of multiple anharmonic resonances. Computations employing a local mode Hamiltonian reveal the origin of the spectral congestion to be strong coupling between the high frequency C-H stretching modes and the lower frequency bending/scissoring motions. The only significant local coupling is between stretches and bends on the same CH2/CH3 group.

  16. 40 CFR 721.9492 - Polymers of styrene, cyclohexyl methacrylate and substituted methacrylate.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Polymers of styrene, cyclohexyl... Significant New Uses for Specific Chemical Substances § 721.9492 Polymers of styrene, cyclohexyl methacrylate...) The chemical substances identified generically as polymers of styrene, cyclohexyl methacrylate...

  17. 40 CFR 721.9492 - Polymers of styrene, cyclohexyl methacrylate and substituted methacrylate.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Polymers of styrene, cyclohexyl... Significant New Uses for Specific Chemical Substances § 721.9492 Polymers of styrene, cyclohexyl methacrylate...) The chemical substances identified generically as polymers of styrene, cyclohexyl methacrylate...

  18. 40 CFR 721.9492 - Polymers of styrene, cyclohexyl methacrylate and substituted methacrylate.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Polymers of styrene, cyclohexyl... Significant New Uses for Specific Chemical Substances § 721.9492 Polymers of styrene, cyclohexyl methacrylate...) The chemical substances identified generically as polymers of styrene, cyclohexyl methacrylate...

  19. 40 CFR 721.9492 - Polymers of styrene, cyclohexyl methacrylate and substituted methacrylate.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Polymers of styrene, cyclohexyl... Significant New Uses for Specific Chemical Substances § 721.9492 Polymers of styrene, cyclohexyl methacrylate...) The chemical substances identified generically as polymers of styrene, cyclohexyl methacrylate...

  20. Positive rates to propyl gallate on patch testing: a change in trend.

    PubMed

    Perez, A; Basketter, D A; White, I R; McFadden, J

    2008-01-01

    Propyl gallate (E310) has, until recently, been used as a major antioxidant in fatty food and, in the cosmetic industry, in the manufacture of lipsticks. Propyl gallate has a high sensitizing potential; however, the frequency of allergic contact dermatitis from antioxidants of the gallate type was previously thought to be surprisingly low. Previous exposure and orally induced tolerance, as suggested by Khan and colleagues, may have explained the low rates of allergic contact dermatitis to propyl gallate in the past. The objectives were to assess the prevalence of allergic contact dermatitis to propyl gallate in our centre from 1988 to 2005. From 1988 to 2005, 9529 patients were patch tested to the face series, 6973 were females and 2556 were males. Patch tests were read at 2 D and 4 D. Positive reactions were scored as per International Contact Dermatitis Research Group recommendations as negative, +, ++, and +++ reactions. Propyl gallate was used at a 1% petrolatum (pet.). A total of 55 patients had positive reactions to propyl gallate 1% pet. (0.57%), 46 were female (0.65%) and 9 were male (0.33%). Using chi-square, there was a significant difference (P < 0.05) in the positivity rates between the 1988-96 period (0.45%) and the 1997-2005 period (0.77%). A review of our face series performed in the last 18 years has shown a statistically significant increase in propyl gallate-positive rates on patch testing over the last decade. An increase in its use in the cosmetic industry may well be the explanation for this. Nevertheless, a concomitant reduction of propyl gallate as an antioxidant in food, with oral tolerance being less likely to develop, may also be a contributing factor in the increasing trend of allergic contact dermatitis caused by propyl gallate.

  1. 21 CFR 882.5300 - Methyl methacrylate for cranioplasty.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... methacrylate for cranioplasty. (a) Identification. Methyl methacrylate for cranioplasty (skull repair) is a self-curing acrylic that a surgeon uses to repair a skull defect in a patient. At the time of...

  2. 21 CFR 882.5300 - Methyl methacrylate for cranioplasty.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... methacrylate for cranioplasty. (a) Identification. Methyl methacrylate for cranioplasty (skull repair) is a self-curing acrylic that a surgeon uses to repair a skull defect in a patient. At the time of...

  3. 21 CFR 882.5300 - Methyl methacrylate for cranioplasty.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... methacrylate for cranioplasty. (a) Identification. Methyl methacrylate for cranioplasty (skull repair) is a self-curing acrylic that a surgeon uses to repair a skull defect in a patient. At the time of...

  4. 21 CFR 882.5300 - Methyl methacrylate for cranioplasty.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... methacrylate for cranioplasty. (a) Identification. Methyl methacrylate for cranioplasty (skull repair) is a self-curing acrylic that a surgeon uses to repair a skull defect in a patient. At the time of...

  5. 21 CFR 882.5300 - Methyl methacrylate for cranioplasty.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... methacrylate for cranioplasty. (a) Identification. Methyl methacrylate for cranioplasty (skull repair) is a self-curing acrylic that a surgeon uses to repair a skull defect in a patient. At the time of...

  6. pH-sensitive methacrylic copolymers and the production thereof

    SciTech Connect

    Mallapragada, Surya K.; Anderson, Brian C.; Bloom, Paul D.; Sheares Ashby, Valerie V.

    2006-02-14

    The present invention provides novel multi-functional methacrylic copolymers that exhibit cationic pH-sensitive behavior as well as good water solubility under acidic conditions. The copolymers are constructed from tertiary amine methacrylates and poly(ethylene glycol) containing methacrylates. The copolymers are useful as gene vectors, pharmaceutical carriers, and in protein separation applications.

  7. pH-sensitive methacrylic copolymers and the production thereof

    SciTech Connect

    Mallapragada, Surya K.; Anderson, Brian C.; Bloom, Paul D.; Sheares Ashby, Valerie V.

    2007-01-09

    The present invention provides novel multi-functional methacrylic copolymers that exhibit cationic pH-sensitive behavior as well as good water solubility under acidic conditions. The copolymers are constructed from tertiary amine methacrylates and poly(ethylene glycol) containing methacrylates. The copolymers are useful as gene vectors, pharmaceutical carriers, and in protein separation applications.

  8. 21 CFR 172.775 - Methacrylic acid-divinylbenzene copolymer.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Methacrylic acid-divinylbenzene copolymer. 172.775... HUMAN CONSUMPTION Other Specific Usage Additives § 172.775 Methacrylic acid-divinylbenzene copolymer. Methacrylic acid-divinylbenzene copolymer may be safely used in food in accordance with the...

  9. 21 CFR 172.775 - Methacrylic acid-divinylbenzene copolymer.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Methacrylic acid-divinylbenzene copolymer. 172.775... HUMAN CONSUMPTION Other Specific Usage Additives § 172.775 Methacrylic acid-divinylbenzene copolymer. Methacrylic acid-divinylbenzene copolymer may be safely used in food in accordance with the...

  10. 21 CFR 172.775 - Methacrylic acid-divinylbenzene copolymer.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Methacrylic acid-divinylbenzene copolymer. 172.775... HUMAN CONSUMPTION Other Specific Usage Additives § 172.775 Methacrylic acid-divinylbenzene copolymer. Methacrylic acid-divinylbenzene copolymer may be safely used in food in accordance with the...

  11. A novel chemoenzymatic synthesis of propyl caffeate using lipase-catalyzed transesterification in ionic liquid.

    PubMed

    Pang, Na; Gu, Shuang-Shuang; Wang, Jun; Cui, Hong-Sheng; Wang, Fang-Qin; Liu, Xi; Zhao, Xing-Yu; Wu, Fu-An

    2013-07-01

    Propyl caffeate has the highest antioxidant capacity in the caffeate alkyl esters family, but industrial production of propyl caffeate is hindered by low yields using either the chemical or enzymatic catalysis method. To set up a high-yield process for obtaining propyl caffeate, a novel chemoenzymatic synthesis method using lipase-catalyzed transesterification of an intermediate methyl caffeate or ethyl caffeate and 1-propanol in ionic liquid was established. The maximum propyl caffeate yield of 98.5% was obtained using lipase-catalyzed transesterification under the following optimal conditions: Novozym 435 as a biocatalyst, [Bmim][CF3SO3] as a medium, a molar ratio of methyl caffeate to 1-propanol of 1:5, a mass ratio of methyl caffeate to lipase of 1:20, and a reaction temperature of 60°C. The two-step conversion of caffeic acid to propyl caffeate via methyl caffeate is an efficient way to prepare propyl caffeate with an overall yield of 82.7%.

  12. Temperature dependent surface modification of silica spheres with methacrylate

    NASA Astrophysics Data System (ADS)

    Kang, Kwang-Sun; Kim, Byoung-Ju; Jo, Dong-Hyun; Lim, Sae-Han; Park, Jin-Young; Kim, Do-gyun

    2014-09-01

    Surface modification of silica spheres with 3-(Trimethoxysilyl)propylmethacrylate (TMSPM) has been performed at ambient condition. However, the FTIR spectra and field emission scanning electron microscope (FESEM) images show no evidence of the surface modification. The reaction temperatures were varied from 60 to 80 °C with various reaction periods. Small absorption shoulder of the C=O stretching vibration was at 1700 cm-1, and slightly increased with the increase of the reaction time at 60 °C. The clear absorption peak appeared at 1698 cm-1 for the spheres reacted for 80 min at 70 °C and shifted toward 1720 cm-1 with the increase the reaction time. Strong absorption peak showed at 1698 cm-1 and shifted toward 1725 cm-1 with the increase of the reaction time at 80 °C. The spheres were dispersed to methanol and added photoinitiator (Irgacure-184). The solution was poured to a patterned glass substrate and exposed to the 254 nm UV-light during a self-assembly process. A large area and crack-free silica sphere film was formed. To increase the mechanical stability, a cellulose acetate solution was spin-coated to the film. The film was lift-off from the glass substrate to analyze the surface nanostructures. The surface nanostructures were maintained, and the film is stable enough to use as a mold to duplicate the nanopattern and flexible.

  13. Towards optimization of the silanization process of hydroxyapatite for its use in bone cement formulations.

    PubMed

    Cisneros-Pineda, Olga G; Herrera Kao, Wilberth; Loría-Bastarrachea, María I; Veranes-Pantoja, Yaymarilis; Cauich-Rodríguez, Juan V; Cervantes-Uc, José M

    2014-07-01

    The aim of this work was to provide some fundamental information for optimization of silanization of hydroxyapatite intended for bone cement formulations. The effect of 3-(trimethoxysilyl) propyl methacrylate (MPS) concentration and solvent system (acetone/water or methanol/water mixtures) during HA silanization was monitored by X-ray diffraction (XRD), FTIR spectroscopy and EDX analysis. The effect of silanized HA on the mechanical properties of acrylic bone cements is also reported. It was found that the silanization process rendered hydroxyapatite with lower crystallinity compared to untreated HA. Through EDX, it was observed that the silicon concentration in the HA particles was higher for acetone-water than that obtained for methanol-water system, although the mechanical performance of cements prepared with these particles exhibited the opposite behavior. Taking all these results together, it is concluded that methanol-water system containing MPS at 3wt.% provides the better results during silanization process of HA.

  14. Dimensional accuracy of thermoformed polymethyl methacrylate.

    PubMed

    Jagger, R G

    1996-12-01

    Thermoforming of polymethyl methacrylate sheet is used to produce a number of different types of dental appliances. The purpose of this study was to determine the dimensional accuracy of thermoformed polymethyl methacrylate specimens. Five blanks of the acrylic resin were thermoformed on stone casts prepared from a silicone mold of a brass master die. The distances between index marks were measured both on the cast and on the thermoformed blanks with an optical comparator. Measurements on the blanks were made again 24 hours after processing and then 1 week, 1 month, and 3 months after immersion in water. Linear shrinkage of less than 1% (range 0.37% to 0.52%) was observed 24 hours after removal of the blanks from the cast. Immersion of the thermoformed specimens in water resulted in an increase in measured dimensions, but after 3 months' immersion these increases were still less than those of the cast (range 0.07% to 0.18%). It was concluded that it is possible to thermoform Perspex polymethyl methacrylate accurately.

  15. The mechanical properties of elastomeric poly(alkyl methacrylate)s.

    PubMed

    Davy, K W; Braden, M

    1987-09-01

    A range of poly(alkyl methacrylate)s in the range C5 to C13 with varying degrees of crosslinking, have been studied with respect to stress-strain behaviour. Where the extensions to break were sufficiently high, stress-strain properties conformed well to the statistical theory of rubber elasticity, the Mooney/Rivlin C2 term being sensibly zero. All materials studied were very elastic, exhibiting extremely little permanent set. The energy to break decreases very rapidly as the homologous series is ascended, and 0.5% crosslinking agent is perfectly adequate to give elastic properties. Hence either n-pentyl or hexyl methacrylates are to be preferred in soft prosthesis formulations on mechanical grounds.

  16. Ecotoxicological effects of the antioxidant additive propyl gallate in five aquatic systems.

    PubMed

    Zurita, Jorge L; Jos, Angeles; del Peso, Ana; Salguero, Manuel; López-Artíguez, Miguel; Repetto, Guillermo

    2007-06-01

    Propyl gallate is an antioxidant widely used in foods, cosmetics and pharmaceuticals. The occurrence and fate of additives in the aquatic environment is an emerging issue in environmental chemistry. To date, there is little available information about the adverse effects of propyl gallate on aquatic organisms. Therefore, the toxic effects were investigated, using five model systems from four trophic levels. The most sensitive system was the hepatoma fish cell line PLHC-1 according to total protein content, with an EC(50) of 10 microM and a NOAEL of 1 microM at 72 h, followed by the immobilization of Daphnia magna, the inhibition of bioluminescence of Vibrio fischeri, the salmonid fish cell line RTG-2 and the inhibition of the growth of Chlorella vulgaris. Although protein content, neutral red uptake, methylthiazol metabolization and acetylcholinesterase activity were reduced in PLHC-1 cells, stimulations were observed for lysosomal function, succinate dehydrogenase, glucose-6-phosphate dehydrogenase and ethoxyresorufin-O-deethylase activities. No changes were observed in metallothionein levels. The main morphological observations were the loss of cells and the induction of cell death mainly by necrosis but also by apoptosis. The protective and toxic effects of propyl gallate were evaluated. General antioxidants and calcium chelators did not modify the toxicity of propyl gallate, but an iron-dependent lipid peroxidation inhibitor gave 22% protection. The results also suggest that propyl gallate cytotoxicity is dependent on glutathione levels, which were modulated by malic acid diethyl ester and 2-oxothiazolidine-4-carboxylic acid. According to the results, propyl gallate should be classified as toxic to aquatic organisms. PMID:17382989

  17. Zwitterionic Poly(amino acid methacrylate) Brushes

    PubMed Central

    2014-01-01

    A new cysteine-based methacrylic monomer (CysMA) was conveniently synthesized via selective thia-Michael addition of a commercially available methacrylate-acrylate precursor in aqueous solution without recourse to protecting group chemistry. Poly(cysteine methacrylate) (PCysMA) brushes were grown from the surface of silicon wafers by atom-transfer radical polymerization. Brush thicknesses of ca. 27 nm were achieved within 270 min at 20 °C. Each CysMA residue comprises a primary amine and a carboxylic acid. Surface zeta potential and atomic force microscopy (AFM) studies of the pH-responsive PCysMA brushes confirm that they are highly extended either below pH 2 or above pH 9.5, since they possess either cationic or anionic character, respectively. At intermediate pH, PCysMA brushes are zwitterionic. At physiological pH, they exhibit excellent resistance to biofouling and negligible cytotoxicity. PCysMA brushes undergo photodegradation: AFM topographical imaging indicates significant mass loss from the brush layer, while XPS studies confirm that exposure to UV radiation produces surface aldehyde sites that can be subsequently derivatized with amines. UV exposure using a photomask yielded sharp, well-defined micropatterned PCysMA brushes functionalized with aldehyde groups that enable conjugation to green fluorescent protein (GFP). Nanopatterned PCysMA brushes were obtained using interference lithography, and confocal microscopy again confirmed the selective conjugation of GFP. Finally, PCysMA undergoes complex base-catalyzed degradation in alkaline solution, leading to the elimination of several small molecules. However, good long-term chemical stability was observed when PCysMA brushes were immersed in aqueous solution at physiological pH. PMID:24884533

  18. Comprehensive Analysis of Interstellar Iso-PROPYL Cyanide up to 480 GHZ

    NASA Astrophysics Data System (ADS)

    Kolesniková, Lucie; Alonso, E. R.; Cabezas, Carlos; Mata, Santiago; Alonso, José L.

    2016-06-01

    Iso-propyl cyanide, also known as iso-butyronitrile, is a branched alkyl molecule recently detected in the interstellar medium. A combination of Stark-modulated microwave spectroscopy and frequency-modulated millimeter and submillimeter wave spectroscopy was used to analyze its rotational spectrum from 26 to 480 GHz. Spectral assignments and analysis include transitions from the ground state, eight excited vibrational states and 13C isotopologues. Results of this work should facilitate astronomers further observations of iso-propyl cyanide in the interstellar medium. A. Belloche, R. T. Garrod, H. S. P. Müller, K. M. Menten, Science, 2014, 345, 1584

  19. 40 CFR 721.10397 - Alkyl acrylate-polyfluoro methacrylate-poly(oxyalkylenediyl)-methacrylates (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Alkyl acrylate-polyfluoro methacrylate... SUBSTANCES Significant New Uses for Specific Chemical Substances § 721.10397 Alkyl acrylate-polyfluoro... subject to reporting. (1) The chemical substances identified generically as alkyl...

  20. 40 CFR 721.10397 - Alkyl acrylate-polyfluoro methacrylate-poly(oxyalkylenediyl)-methacrylates (generic).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Alkyl acrylate-polyfluoro methacrylate... SUBSTANCES Significant New Uses for Specific Chemical Substances § 721.10397 Alkyl acrylate-polyfluoro... subject to reporting. (1) The chemical substances identified generically as alkyl...

  1. 40 CFR 721.10397 - Alkyl acrylate-polyfluoro methacrylate-poly(oxyalkylenediyl)-methacrylates (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Alkyl acrylate-polyfluoro methacrylate... SUBSTANCES Significant New Uses for Specific Chemical Substances § 721.10397 Alkyl acrylate-polyfluoro... subject to reporting. (1) The chemical substances identified generically as alkyl...

  2. Injectible bodily prosthetics employing methacrylic copolymer gels

    DOEpatents

    Mallapragada, Surya K.; Anderson, Brian C.

    2007-02-27

    The present invention provides novel block copolymers as structural supplements for injectible bodily prosthetics employed in medical or cosmetic procedures. The invention also includes the use of such block copolymers as nucleus pulposus replacement materials for the treatment of degenerative disc disorders and spinal injuries. The copolymers are constructed by polymerization of a tertiary amine methacrylate with either a (poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide) polymer, such as the commercially available Pluronic.RTM. polymers, or a poly(ethylene glycol) methyl ether polymer.

  3. Single femtosecond pulse holography using polymethyl methacrylate.

    PubMed

    Li, Yan; Yamada, Kazuhiro; Ishizuka, Tomohiko; Watanabe, Wataru; Itoh, Kazuyoshi; Zhou, Zhongxiang

    2002-10-21

    Holographic gratings have been written on the surface and inside transparent polymethyl methacrylate (PMMA) with individual 130 fs laser pulses at 800 nm. A surface-relief grating is fabricated by ablation and the diffraction efficiency is measured to be about 20%. A volume grating inside PMMA is formed by the change in the refractive index induced by the two-beam interference fringes. Holographic data storage on the surface is realized when one beam carries information. The stored information can be nondestructively reconstructed when the fluence of the read beam is reduced below the threshold.

  4. Methacrylic resin having a high solar radiant energy absorbing property and process for producing the same

    SciTech Connect

    Abe, K.; Kamada, K.; Nakai, Y.

    1981-10-20

    A methacrylic resin having a high solar radiant energy absorbing property wherein an organic compound (A) containing cupric ion and a compound (B) having at least one p-o-h bond in a molecule are contained into the methacrylic resin selected from poly(Methyl methacrylate) or methacrylic polymers containing at least 50% by weight of a methyl methacrylate unit. A process for producing said methacrylic resin is also disclosed.

  5. Cell-laden microengineered gelatin methacrylate hydrogels

    PubMed Central

    Nichol, Jason W.; Koshy, Sandeep; Bae, Hojae; Hwang, Chang Mo; Yamanlar, Seda; Khademhosseini, Ali

    2010-01-01

    The cellular microenvironment plays an integral role in improving the function of microengineered tissues. Control of the microarchitecture in engineered tissues can be achieved through photopatterning of cell-laden hydrogels. However, despite high pattern fidelity of photopolymerizable hydrogels, many such materials are not cell-responsive and have limited biodegradability. Here we demonstrate gelatin methacrylate (GelMA) as an inexpensive, cell-responsive hydrogel platform for creating cell-laden microtissues and microfluidic devices. Cells readily bound to, proliferated, elongated and migrated both when seeded on micropatterned GelMA substrates as well as when encapsulated in microfabricated GelMA hydrogels. The hydration and mechanical properties of GelMA were demonstrated to be tunable for various applications through modification to the methacrylation degree and gel concentration. Pattern fidelity and resolution of GelMA was high and it could be patterned to create perfusable microfluidic channels. Furthermore, GelMA micropatterns could be used to create cellular micropatterns for in vitro cell studies or 3D microtissue fabrication. These data suggest that GelMA hydrogels could be useful for creating complex, cell-responsive microtissues, such as endothelialized microvasculature, or for other applications that requires cell-responsive microengineered hydrogels. PMID:20417964

  6. Cell-laden microengineered gelatin methacrylate hydrogels.

    PubMed

    Nichol, Jason W; Koshy, Sandeep T; Bae, Hojae; Hwang, Chang M; Yamanlar, Seda; Khademhosseini, Ali

    2010-07-01

    The cellular microenvironment plays an integral role in improving the function of microengineered tissues. Control of the microarchitecture in engineered tissues can be achieved through photopatterning of cell-laden hydrogels. However, despite high pattern fidelity of photopolymerizable hydrogels, many such materials are not cell-responsive and have limited biodegradability. Here, we demonstrate gelatin methacrylate (GelMA) as an inexpensive, cell-responsive hydrogel platform for creating cell-laden microtissues and microfluidic devices. Cells readily bound to, proliferated, elongated, and migrated both when seeded on micropatterned GelMA substrates as well as when encapsulated in microfabricated GelMA hydrogels. The hydration and mechanical properties of GelMA were demonstrated to be tunable for various applications through modification of the methacrylation degree and gel concentration. The pattern fidelity and resolution of GelMA were high and it could be patterned to create perfusable microfluidic channels. Furthermore, GelMA micropatterns could be used to create cellular micropatterns for in vitro cell studies or 3D microtissue fabrication. These data suggest that GelMA hydrogels could be useful for creating complex, cell-responsive microtissues, such as endothelialized microvasculature, or for other applications that require cell-responsive microengineered hydrogels.

  7. Kinetics of the transformation of n-propyl gallate and structural analogs in the perfused rat liver

    SciTech Connect

    Eler, Gabrielle Jacklin; Santos, Israel Souza; Giaretta de Moraes, Amarilis; Mito, Márcio Shigueaki; Comar, Jurandir Fernando; Peralta, Rosane Marina; Bracht, Adelar

    2013-11-15

    n-Propyl gallate and its analogs are used in foods and other products to prevent oxidation. In the liver the compound exerts several harmful effects, especially gluconeogenesis inhibition. The mode of transport and distribution of n-propyl gallate and its kinetics of biotransformation have not yet been investigated. To fill this gap the transformation, transport and distribution of n-propyl gallate and two analogs were investigated in the rat liver. Isolated perfused rat liver was used. n-Propyl gallate, methyl gallate, n-octyl gallate and transformation products were quantified by high pressure-liquid chromatography coupled to fluorescence detection. The interactions of n-propyl gallate and analogs with the liver presented three main characteristics: (1) the hydrolytic release of gallic acid from n-propyl gallate and methyl gallate was very fast compared with the subsequent transformations of the gallic acid moiety; (2) transport of the esters was very fast and flow-limited in contrast to the slow and barrier-limited transport of gallic acid; (3) the apparent distribution volume of n-propyl gallate, but probably also of methyl gallate and n-octyl gallate, greatly exceeded the water space in the liver, contrary to the gallic acid space which is smaller than the water space. It can be concluded that at low portal concentrations (< 50 μM) the gallic acid esters are 100% extracted during a single passage through the liver, releasing mainly gallic acid into the systemic circulation. For the latter a considerable time is required until complete biotransformation. The exposure of the liver to the esters, however, is quite prolonged due to extensive intracellular binding. - Highlights: • The liver binds very strongly n-propyl gallate and releases basically gallic acid. • n-propyl gallate and analogs undergo concentrative flow-limited distribution. • Gallic acid undergoes barrier-limited distribution and is slowly transformed. • The long residence time of n-propyl

  8. 40 CFR 721.10053 - Alkyl silane methacrylate (generic).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Alkyl silane methacrylate (generic... Specific Chemical Substances § 721.10053 Alkyl silane methacrylate (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as alkyl...

  9. 40 CFR 721.10053 - Alkyl silane methacrylate (generic).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Alkyl silane methacrylate (generic... Specific Chemical Substances § 721.10053 Alkyl silane methacrylate (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as alkyl...

  10. 40 CFR 721.10053 - Alkyl silane methacrylate (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Alkyl silane methacrylate (generic... Specific Chemical Substances § 721.10053 Alkyl silane methacrylate (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as alkyl...

  11. 40 CFR 721.10053 - Alkyl silane methacrylate (generic).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Alkyl silane methacrylate (generic... Specific Chemical Substances § 721.10053 Alkyl silane methacrylate (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as alkyl...

  12. 40 CFR 721.10053 - Alkyl silane methacrylate (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Alkyl silane methacrylate (generic... Specific Chemical Substances § 721.10053 Alkyl silane methacrylate (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as alkyl...

  13. DEGRADATION OF POLY(METHYL METHACRYLATE) IN SOLUTION

    EPA Science Inventory

    The rate of degradation of poly(methyl methacrylate) (PMMA) to methyl methacrylate (MMA) was investigated in the liquid phase with toluene as the solvent. The degradation experiments were carried out in a tubular flow reactor at 1000 psig (6.8 MPa) and at four different temperat...

  14. Regioselective ester cleavage during the preparation of bisphosphonate methacrylate monomers

    PubMed Central

    Chougrani, Kamel; Niel, Gilles; Boutevin, Bernard

    2011-01-01

    Summary New functional monomers bearing a methacrylate, a bisphosphonate function and, for most, an internal carboxylate group, were prepared for incorporation into copolymers with adhesive or anticorrosive properties. Methanolysis of some trimethylsilyl bisphosphonate esters not only deprotects the desired bisphosphonate function but also regioselectively cleaves the alkyl ester function without affecting the methacrylate ester. PMID:21512600

  15. Studies on the Food Additive Propyl Gallate: Synthesis, Structural Characterization, and Evaluation of the Antioxidant Activity

    ERIC Educational Resources Information Center

    Garrido, Jorge; Garrido, E. Manuela; Borges, Fernanda

    2012-01-01

    Antioxidants are additives largely used in industry for delaying, retarding, or preventing the development of oxidative deterioration. Propyl gallate (E310) is a phenolic antioxidant extensively used in the food, cosmetics, and pharmaceutical industries. A series of lab experiments have been developed to teach students about the importance and…

  16. Improvement of holographic thermal stability in phenanthrenequinone-doped poly(methyl methacrylate-co-methacrylic acid) photopolymer

    NASA Astrophysics Data System (ADS)

    Yu, Dan; Liu, Hongpeng; Wang, Heng; Wang, Jian; Jiang, Yongyuan; Sun, Xiudong

    2011-08-01

    Experimental studies of holographic thermal stability in phenanthrenequinone (PQ)-doped poly(methyl methacrylate-co-methacrylic acid) [P(MMA-co-MAA)] photopolymers are presented. A possibility to improve the thermal stability of holograms is demonstrated by doping methacrylic acid (MAA) into the poly(methyl methacrylate) (PMMA) polymer matrix. MAA as a copolymerization monomer can form a more stable polymer matrix with methyl methacrylate (MMA) monomer and increase average molecular weight of photoproducts, which finally depress the diffusion of photoproduct. The optimized MAA concentration copolymerized into P(MMA-co-MAA) polymer matrix can bring nearly a month's lifetime of gratings, which is obviously an improvement over the usual PQ-PMMA material under thermal treatment.

  17. Preparation of ultrafine poly(methyl methacrylate-co-methacrylic acid) biodegradable nanoparticles loaded with ibuprofen.

    PubMed

    Saade, Hened; Diaz de León-Gómez, Ramón; Enríquez-Medrano, Francisco Javier; López, Raúl Guillermo

    2016-08-01

    Ibuprofen-loaded polymeric particles with around 9.2 nm in mean diameter, as determined by electron microscopy, dispersed in an aqueous media containing up to 12.8% solids were prepared by semicontinuous heterophase polymerization. The polymeric material is a (2/1 mol/mol) methyl methacrylate-co-methacrylic acid copolymer similar to Eudragit S100, deemed safe for human consumption and used in the manufacturing of drug-loaded pills as well as micro- and nanoparticles. The loading efficiency was 100%, attaining around 10-12% in drug content. Release studies showed that the drug is released from the nanoparticles at a slower rate than that in the case of free IB. Given their size as well as the pH values required for their dissolution, it is believed that this type of particles could be used as a basis for preparing nanosystems loaded with a variety of drugs.

  18. Preparation of ultrafine poly(methyl methacrylate-co-methacrylic acid) biodegradable nanoparticles loaded with ibuprofen.

    PubMed

    Saade, Hened; Diaz de León-Gómez, Ramón; Enríquez-Medrano, Francisco Javier; López, Raúl Guillermo

    2016-08-01

    Ibuprofen-loaded polymeric particles with around 9.2 nm in mean diameter, as determined by electron microscopy, dispersed in an aqueous media containing up to 12.8% solids were prepared by semicontinuous heterophase polymerization. The polymeric material is a (2/1 mol/mol) methyl methacrylate-co-methacrylic acid copolymer similar to Eudragit S100, deemed safe for human consumption and used in the manufacturing of drug-loaded pills as well as micro- and nanoparticles. The loading efficiency was 100%, attaining around 10-12% in drug content. Release studies showed that the drug is released from the nanoparticles at a slower rate than that in the case of free IB. Given their size as well as the pH values required for their dissolution, it is believed that this type of particles could be used as a basis for preparing nanosystems loaded with a variety of drugs. PMID:27126476

  19. Poly(ethyl methacrylate) and poly(2-ethoxyethyl methacrylate) based polymer gel electrolytes

    NASA Astrophysics Data System (ADS)

    Reiter, Jakub; Michálek, Jiří; Vondrák, Jiří; Chmelíková, Dana; Přádný, Martin; Mička, Zdeněk

    New poly(ethyl methacrylate) and poly(2-ethoxyethyl methacrylate) gel electrolytes containing immobilised lithium perchlorate solution in propylene carbonate were prepared by UV radical polymerisation. Materials exhibit high ionic conductivity up to 0.23 mS cm -1 and long-term stability of chemical and mechanical properties. Both materials keep their suitable conductivity above -20 °C. The effect of material composition, temperature, cross-linking agent and salt concentration on the electrochemical and mechanical properties were studied using impedance spectroscopy and cyclic voltammetry. The accessible electrochemical window of both polymer electrolytes was estimated from -2.1 to 1.5 V versus Cd/Cd 2+. Impedance measurements showed almost one-order increase of conductivity when ethylene dimethacrylate was used as a cross-linking agent in comparison with the polymer electrolyte without agent.

  20. Inhibitory effects of propyl gallate on tyrosinase and its application in controlling pericarp browning of harvested longan fruits.

    PubMed

    Lin, Yi-Fen; Hu, Yong-Hua; Lin, He-Tong; Liu, Xuan; Chen, Yi-Hui; Zhang, Shen; Chen, Qing-Xi

    2013-03-20

    Tyrosinase (EC 1.14.18.1), also known as polyphenol oxidase (PPO), is a key enzyme in pigment biosynthesis of organisms. The inhibitory effects of propyl gallate on the activity of mushroom tyrosinase and effects of propyl gallate on pericarp browning of harvested longan fruits in relation to phenolic metabolism were investigated. The results showed that propyl gallate could potently inhibit diphenolase activity of tyrosinase. The inhibitor concentration leading to 50% activity lost (IC50) was determined to be 0.685 mM. Kinetic analyses showed that propyl gallate was a reversible and mixed type inhibitor on this enzyme. The inhibition constants (K(IS) and K(I)) were determined to be 2.135 and 0.661 mM, respectively. Furthermore, the results also showed that propyl gallate treatment inhibited activities of PPO and POD in pericarp of harvested longan fruits, and maintained higher contents of total phenol and flavonoid of longan pericarp. Moreover, propyl gallate treatment also delayed the increases of browning index and browning degree in pericarp of harvested longan fruits. Therefore, application of propyl gallate may be a promising method for inhibiting tyrosinase activity, controlling pericarp browning, and extending shelf life of harvested longan fruits.

  1. Biocompatible Bacterial Cellulose-Poly(2-hydroxyethyl methacrylate) Nanocomposite Films

    PubMed Central

    Figueiredo, Andrea G. P. R.; Figueiredo, Ana R. P.; Alonso-Varona, Ana; Fernandes, Susana C. M.; Palomares, Teodoro; Rubio-Azpeitia, Eva; Barros-Timmons, Ana; Silvestre, Armando J. D.; Pascoal Neto, Carlos; Freire, Carmen S. R.

    2013-01-01

    A series of bacterial cellulose-poly(2-hydroxyethyl methacrylate) nanocomposite films was prepared by in situ radical polymerization of 2-hydroxyethyl methacrylate (HEMA), using variable amounts of poly(ethylene glycol) diacrylate (PEGDA) as cross-linker. Thin films were obtained, and their physical, chemical, thermal, and mechanical properties were evaluated. The films showed improved translucency compared to BC and enhanced thermal stability and mechanical performance when compared to poly(2-hydroxyethyl methacrylate) (PHEMA). Finally, BC/PHEMA nanocomposites proved to be nontoxic to human adipose-derived mesenchymal stem cells (ADSCs) and thus are pointed as potential dry dressings for biomedical applications. PMID:24093101

  2. Final report of the safety assessment of methacrylic acid.

    PubMed

    2005-01-01

    Methacrylic Acid is an organic acid used at concentrations between 50 and 88 percent to pretreat the nail and maximize the adhesion between the nail and artificial nail extender. Methacrylic Acid is readily absorbed through mucous membranes of the lungs, the gastrointestinal tract, and the skin; and is distributed to all major tissues. Oral LD50 values for rats ranged from 277 to 2260 mg/kg; acute toxicity symptoms included severe gastric irritation, gasping, labored respiration, prostration and hematuria. In a short-term inhalation study, rats exposed to Methacrylic Acid at 1300 ppm showed nose and eye irritation and weight loss, while necropsy results and blood and urine tests were normal. Methacrylic Acid is an ocular toxicant in animals. Undiluted Methacrylic Acid is corrosive to the skin of rabbits and guinea pigs. Exposure as limited as 3 minutes can cause severe erythema and slight to moderate edema. Exposure from 15 minutes to 24 hours under occlusive patches can cause marked to severe discoloration, slight to severe subcutaneous hemorrhages, necrosis, ulcerations, severe erythema, edema and concave eschar. Methacrylic Acid was irritating and caused strong rubefaction and scab formation in a guinea pig maximization test at challenge concentrations from 10 to 100 percent. It was difficult to determine if the results were type IV hypersensitivity reactions or simple irritation. In three other studies, guinea pigs were not sensitized. Methacrylic Acid was not a reproductive/developmental toxicant in rats or mice. Methacrylic Acid was negative in Salmonella typhimurium mutagenicity tests using strains TA98, TA100, TA1535 and TA1537 both with and without metabolic activation, but was positive in a DNA-cell-binding assay. Case reports involving Methacrylic Acid often involve children. Effects from ingestion include drooling, gagging, and vomiting. Children exposed to Methacrylic Acid as a result of accidental spills caused first and second degree burns to the

  3. Inhibitory effects of propyl gallate on membrane lipids metabolism and its relation to increasing storability of harvested longan fruit.

    PubMed

    Lin, Yifen; Lin, Yixiong; Lin, Hetong; Shi, John; Chen, Yihui; Wang, Hui

    2017-02-15

    Effects of propyl gallate on membrane lipids metabolism and its relation to storability of harvested longan fruits were studied. The results showed that the propyl gallate-treated longans maintained lower activities of pericarp phospholipase D (PLD), lipase and lipoxygenase (LOX) than those in control fruits. Such treatments could maintain higher levels of pericarp unsaturated fatty acids (USFAs), higher pericarp indices of unsaturated fatty acids (IUFA), and higher pericarp ratio of unsaturated fatty acids to saturated fatty acids (U/S) than those in control fruits. Furthermore, propyl gallate also delayed color changes of pericarp in the harvested longans. Therefore, the postharvest treatments of longan fruits with propyl gallate for increasing storability of longan fruits might be explained by a decrease in activities of PLD, lipase and LOX, and an the increased unsaturation of fatty acids, which could delay membrane lipids metabolism and maintain cell membrane characteristics. PMID:27664618

  4. Enhancement of propyl gallate yield in nonaqueous medium using novel cell-associated tannase of Bacillus massiliensis.

    PubMed

    Aithal, Mahesh; Belur, Prasanna D

    2013-01-01

    Enzymatic synthesis of propyl gallate in organic solvent was studied using cell-associated tannase (EC 3.1.1.20) of Bacillus massiliensis. Lyophilized biomass showing tannase activity was used as the biocatalyst. The effects of solvent, surfactant treatment, and bioimprinting on the propyl gallate synthesis were studied and subsequently optimized. Among various solvents, benzene followed by hexane was found to be the most favorable. Treatment of the biocatalyst with Triton X-100 at a lower concentration (0.2% w/v), before lyophilization, increased the propyl gallate yield by 24.5% compared to the untreated biocatalyst. The biocatalyst was imprinted with various concentrations of gallic acid and tannic acid. Biocatalyst imprinted with tannic acid showed 50% enhancement in the propyl gallate yield compared to the non-imprinted biocatalyst.

  5. Detection of a branched alkyl molecule in the interstellar medium: iso-propyl cyanide

    NASA Astrophysics Data System (ADS)

    Belloche, Arnaud; Garrod, Robin T.; Müller, Holger S. P.; Menten, Karl M.

    2014-09-01

    The largest noncyclic molecules detected in the interstellar medium (ISM) are organic with a straight-chain carbon backbone. We report an interstellar detection of a branched alkyl molecule, iso-propyl cyanide (i-C3H7CN), with an abundance 0.4 times that of its straight-chain structural isomer. This detection suggests that branched carbon-chain molecules may be generally abundant in the ISM. Our astrochemical model indicates that both isomers are produced within or upon dust grain ice mantles through the addition of molecular radicals, albeit via differing reaction pathways. The production of iso-propyl cyanide appears to require the addition of a functional group to a nonterminal carbon in the chain. Its detection therefore bodes well for the presence in the ISM of amino acids, for which such side-chain structure is a key characteristic.

  6. Interaction of single-walled carbon nanotubes with poly(propyl ether imine) dendrimers

    SciTech Connect

    Jayamurugan, G.; Rajesh, Y. B. R. D.; Jayaraman, N.; Vasu, K. S.; Kumar, S.; Sood, A. K.; Vasumathi, V.; Maiti, P. K.

    2011-03-14

    We study the complexation of nontoxic, native poly(propyl ether imine) dendrimers with single-walled carbon nanotubes (SWNTs). The interaction was monitored by measuring the quenching of inherent fluorescence of the dendrimer. The dendrimer-nanotube binding also resulted in the increased electrical resistance of the hole doped SWNT, due to charge-transfer interaction between dendrimer and nanotube. This charge-transfer interaction was further corroborated by observing a shift in frequency of the tangential Raman modes of SWNT. We also report the effect of acidic and neutral pH conditions on the binding affinities. Experimental studies were supplemented by all atom molecular dynamics simulations to provide a microscopic picture of the dendrimer-nanotube complex. The complexation was achieved through charge transfer and hydrophobic interactions, aided by multitude of oxygen, nitrogen, and n-propyl moieties of the dendrimer.

  7. Laboratory Evaluation of Drop-in Solvent Alternatives to n-Propyl Bromide for Vapor Degreasing

    NASA Technical Reports Server (NTRS)

    Mitchell, Mark A.; Lowrey, Nikki M.

    2012-01-01

    Based on this limited laboratory study, solvent blends of trans-1,2 dichloroethylene with HFEs, HFCs, or PFCs appear to be viable alternatives to n-propyl bromide for vapor degreasing. The lower boiling points of these blends may lead to greater solvent loss during use. Additional factors must be considered when selecting a solvent substitute, including stability over time, VOC, GWP, toxicity, and business considerations.

  8. 40 CFR 180.362 - Hexakis (2-methyl-2-phenyl-propyl)distannoxane; tolerances for residues.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... FOOD Specific Tolerances § 180.362 Hexakis (2-methyl-2-phenyl-propyl)distannoxane; tolerances for...: Commodity Parts per million Cattle, fat 0.5 Cattle, meat 0.5 Cattle, meat byproducts 0.5 Egg 0.1 Goat, fat 0.5 Goat, meat 0.5 Goat, meat byproducts 0.5 Hog, fat 0.5 Hog, meat 0.5 Hog, meat byproducts 0.5...

  9. 1,5-Bis(4-iso­propyl­benzyl­idene)thio­carbonohydrazide

    PubMed Central

    Han, Yan-Hua; Zhao, Qiao; Wang, Yong

    2013-01-01

    The title compound, C21H26N4S, was synthesized by the condensation reaction of 4-iso­propyl­benzaldehyde with thio­carbohydrazide in ethanol. The planes of the two benzene rings in the mol­ecule are inclined at 22.6 (1)°. In the crystal, pairs of inter­molecular N—H⋯S hydrogen bonds link the mol­ecules into inversion dimers. PMID:24454099

  10. Spectroscopic Study and Astronomical Detection of Vibrationally Excited n-PROPYL Cyanide

    NASA Astrophysics Data System (ADS)

    Müller, Holger S. P.; Wehres, Nadine; Wilkins, Olivia H.; Lewen, Frank; Schlemmer, Stephan; Walters, Adam; Vicente, Rémi; Liu, Delong; Garrod, Robin T.; Belloche, Arnaud; Menten, Karl M.

    2016-06-01

    We have obtained ALMA data of Sagittarius (Sgr for short) B2(N) between 84.0 and 114.4 GHz in its Early Science Cycles 0 and 1. We have focused our analyses on the northern, secondary hot molecular core Sgr B2(N2) because of the smaller line widths. The survey led to the first detection of a branched alkyl compound, iso-propyl cyanide, i-C_3H_7CN, in space besides the ˜2.5 times more abundant straight chain isomer n-propyl cyanide, a molecule which we had detected in our IRAM 30 m survey. We suspected to be able to detect n-propyl cyanide in vibrationally excited states in our ALMA data. We have recorded laboratory rotational spectra of this molecule in three large frequency regions and identified several excited vibrational states. The analyses of these spectra have focused on the 36 to 70 GHz and 89 to 127 GHz regions and on the four lowest excited vibrational states of both the lower lying gauche- and the slightly higher lying anti-conformer for which rotational constants had been published. We will present results of our laboratory spectroscopic investigations and will report on the detection of these states toward Sgr B2(N2). A. Belloche et al., Science 345 (2014) 1584. A. Belloche et al., A&A 499 (2009) 215. E. Hirota, J. Chem. Phys. 37 (1962) 2918.

  11. Final report of the Cosmetic Ingredient Review Expert Panel safety assessment of polymethyl methacrylate (PMMA), methyl methacrylate crosspolymer, and methyl methacrylate/glycol dimethacrylate crosspolymer.

    PubMed

    Becker, Lillian C; Bergfeld, Wilma F; Belsito, Donald V; Hill, Ronald A; Klaassen, Curtis D; Liebler, Daniel C; Marks, James G; Shank, Ronald C; Slaga, Thomas J; Snyder, Paul W; Andersen, F Alan

    2011-05-01

    Polymethyl methacrylate (PMMA) and related cosmetic ingredients methyl methacrylate crosspolymer and methyl methacrylate/glycol dimethacrylate crosspolymer are polymers that function as film formers and viscosity-increasing agents in cosmetics. The Food and Drug Administration (FDA) determination of safety of PMMA use in several medical devices, which included human and animal safety data, was used as the basis of safety of PMMA and related polymers in cosmetics by the Cosmetic Ingredient Review (CIR) Expert Panel.  The PMMA used in cosmetics is substantially the same as in medical devices.  The Panel concluded that these ingredients are safe as cosmetic ingredients in the practices of use and concentrations as described in this safety assessment. PMID:21772027

  12. Furfuryl methacrylate plasma polymers for biomedical applications.

    PubMed

    Shirazi, Hanieh Safizadeh; Rogers, Nicholas; Michelmore, Andrew; Whittle, Jason D

    2016-01-01

    Furfuryl methacrylate (FMA) is a promising precursor for producing polymers for biomedical and cell therapy applications. Herein, FMA plasma polymer coatings were prepared with different powers, deposition times, and flow rates. The plasma polymer coatings were characterized using atomic force microscopy (AFM), scanning electron microscopy (SEM), x-ray photoelectron spectroscopy (XPS), and time-of-flight secondary ion mass spectrometry (ToF-SIMS). The results from AFM and SEM show the early growth of the coatings and the existence of particle aggregates on the surfaces. XPS results indicated no measureable chemical differences between the deposited films produced under different power and flow rate conditions. ToF-SIMS analysis demonstrated differing amounts of C5H5O (81 m/z) and C10H9O2 (161 m/z) species in the coatings which are related to the furan ring structure. Through judicious choice of plasma polymerization parameters, the quantity of the particle aggregates was reduced, and the fabricated plasma polymer coatings were chemically uniform and smooth. Primary human fibroblasts were cultured on FMA plasma polymer surfaces to determine the effect of surface chemical composition and the presence of particle aggregates on cell culture. Particle aggregates were shown to inhibit fibroblast attachment and proliferation.

  13. Furfuryl methacrylate plasma polymers for biomedical applications.

    PubMed

    Shirazi, Hanieh Safizadeh; Rogers, Nicholas; Michelmore, Andrew; Whittle, Jason D

    2016-01-01

    Furfuryl methacrylate (FMA) is a promising precursor for producing polymers for biomedical and cell therapy applications. Herein, FMA plasma polymer coatings were prepared with different powers, deposition times, and flow rates. The plasma polymer coatings were characterized using atomic force microscopy (AFM), scanning electron microscopy (SEM), x-ray photoelectron spectroscopy (XPS), and time-of-flight secondary ion mass spectrometry (ToF-SIMS). The results from AFM and SEM show the early growth of the coatings and the existence of particle aggregates on the surfaces. XPS results indicated no measureable chemical differences between the deposited films produced under different power and flow rate conditions. ToF-SIMS analysis demonstrated differing amounts of C5H5O (81 m/z) and C10H9O2 (161 m/z) species in the coatings which are related to the furan ring structure. Through judicious choice of plasma polymerization parameters, the quantity of the particle aggregates was reduced, and the fabricated plasma polymer coatings were chemically uniform and smooth. Primary human fibroblasts were cultured on FMA plasma polymer surfaces to determine the effect of surface chemical composition and the presence of particle aggregates on cell culture. Particle aggregates were shown to inhibit fibroblast attachment and proliferation. PMID:27609095

  14. Laboratory spectroscopic study and astronomical detection of vibrationally excited n-propyl cyanide

    NASA Astrophysics Data System (ADS)

    Müller, Holger S. P.; Walters, Adam; Wehres, Nadine; Belloche, Arnaud; Wilkins, Olivia H.; Liu, Delong; Vicente, Rémi; Garrod, Robin T.; Menten, Karl M.; Lewen, Frank; Schlemmer, Stephan

    2016-11-01

    Context. We performed a spectral line survey called Exploring Molecular Complexity with ALMA (EMoCA) toward Sagittarius B2(N) between 84.1 and 114.4 GHz with the Atacama Large Millimeter/submillimeter Array (ALMA) in its Cycles 0 and 1. We determined line intensities of n-propyl cyanide in the ground vibrational states of its gauche and anti conformers toward the hot molecular core Sagittarius B2(N2) which suggest that we should also be able to detect transitions pertaining to excited vibrational states. Aims: We wanted to determine spectroscopic parameters of low-lying vibrational states of both conformers of n-propyl cyanide to search for them in our ALMA data. Methods: We recorded laboratory rotational spectra of n-propyl cyanide in two spectral windows between 36 and 127 GHz. We searched for emission lines produced by these states in the ALMA spectrum of Sagittarius B2(N2). We modeled their emission and the emission of the ground vibrational states assuming local thermodynamic equilibrium (LTE). Results: We have made extensive assignments of a- and b-type transitions of the four lowest vibrational states of the gauche conformer which reach J and Ka quantum numbers of 65 and 20, respectively. We assigned mostly a-type transitions for the anti conformer with J and Ka quantum numbers up to 48 and 24, respectively. Rotational and Fermi perturbations between two anti states allowed us to determine their energy difference. The resulting spectroscopic parameters enabled us to identify transitions of all four vibrational states of each conformer in our ALMA data. The emission features of all states, including the ground vibrational state, are well-reproduced with the same LTE modeling parameters, which gives us confidence in the reliability of the identifications, even for the states with only one clearly detected line. Conclusions: Emission features pertaining to the highest excited vibrational states of n-propyl cyanide reported in this work have been identified just

  15. The influences of the transfer method and particle surface chemistry on the dispersion of nanoparticles in nanocomposites

    NASA Astrophysics Data System (ADS)

    Pravaz, Olivier; Droz, Benoît; Schurtenberger, Peter; Dietsch, Hervé

    2012-10-01

    The synthesis via in situ polymerization and characterization of nanocomposites (NCs) made from silica (SiO2) nanoparticles in a methyl methacrylate (MMA) monomer matrix is reported. We first investigate the transfer of well-defined spherical silica nanoparticles (NPs) (average radius R = 24.2 +/- 3.2 nm) into the monomer solvent. We study the influence of two transfer methods and different surface chemistries on the resulting colloidal stability. The first transfer method consists of drying the silica particles into powder before dispersing them via ultrasonication in the MMA matrix. The second is based on repetitive centrifugations to exchange NPs from their synthetic milieu to pure MMA, avoiding the dried powder state. These transfer methods are compared for two kinds of NP surface chemistry, natural silanol (Si-OH) groups of the silica NPs and an additional silane coupling agent, namely 3-(trimethoxysilyl)propyl methacrylate (TPM), which mimics the monomeric group of the MMA dispersing milieu. We then characterize the morphology of the resulting nanocomposites prepared via in situ polymerization at a fixed amount of dispersed NPs (2.2 wt%; 1 vol%) using a combination of transmission electron microscopy (TEM) from ultramicrotomed nanocomposite films, thermogravimetry (TGA) and small angle X-ray scattering (SAXS).The synthesis via in situ polymerization and characterization of nanocomposites (NCs) made from silica (SiO2) nanoparticles in a methyl methacrylate (MMA) monomer matrix is reported. We first investigate the transfer of well-defined spherical silica nanoparticles (NPs) (average radius R = 24.2 +/- 3.2 nm) into the monomer solvent. We study the influence of two transfer methods and different surface chemistries on the resulting colloidal stability. The first transfer method consists of drying the silica particles into powder before dispersing them via ultrasonication in the MMA matrix. The second is based on repetitive centrifugations to exchange NPs from

  16. Antibacterial inorganic-organic hybrid coatings on stainless steel via consecutive surface-initiated atom transfer radical polymerization for biocorrosion prevention.

    PubMed

    Yuan, S J; Pehkonen, S O; Ting, Y P; Neoh, K G; Kang, E T

    2010-05-01

    To enhance the corrosion resistance of stainless steel (SS) and to impart its surface with antibacterial functionality for inhibiting biofilm formation and biocorrosion, well-defined inorganic-organic hybrid coatings, consisting of a polysilsesquioxane inner layer and quaternized poly(2-(dimethyamino)ethyl methacrylate) (P(DMAEMA)) outer blocks, were prepared via successive surface-initiated atom transfer radical polymerization (ATRP) of 3-(trimethoxysilyl)propyl methacrylate (TMSPMA) and 2-(dimethylamino)ethyl methacrylate (DMAEMA). The cross-linked P(TMASPMA), or polysilsesquioxane, inner layer provided a durable and resistant coating to electrolytes. The pendant tertiary amino groups of the P(DMAEMA) outer block were quaternized with alkyl halide to produce a high concentration of quaternary ammonium groups with biocidal functionality. The so-synthesized inorganic-organic hybrid coatings on the SS substrates exhibited good anticorrosion and antibacterial effects and inhibited biocorrosion induced by sulfate-reducing bacteria (SRB) in seawater media, as revealed by antibacterial assay and electrochemical analyses, and they are potentially useful to steel-based equipment under harsh industrial and marine environments.

  17. Kinetics of the transformation of n-propyl gallate and structural analogs in the perfused rat liver.

    PubMed

    Eler, Gabrielle Jacklin; Santos, Israel Souza; de Moraes, Amarilis Giaretta; Mito, Márcio Shigueaki; Comar, Jurandir Fernando; Peralta, Rosane Marina; Bracht, Adelar

    2013-11-15

    n-Propyl gallate and its analogs are used in foods and other products to prevent oxidation. In the liver the compound exerts several harmful effects, especially gluconeogenesis inhibition. The mode of transport and distribution of n-propyl gallate and its kinetics of biotransformation have not yet been investigated. To fill this gap the transformation, transport and distribution of n-propyl gallate and two analogs were investigated in the rat liver. Isolated perfused rat liver was used. n-Propyl gallate, methyl gallate, n-octyl gallate and transformation products were quantified by high pressure-liquid chromatography coupled to fluorescence detection. The interactions of n-propyl gallate and analogs with the liver presented three main characteristics: (1) the hydrolytic release of gallic acid from n-propyl gallate and methyl gallate was very fast compared with the subsequent transformations of the gallic acid moiety; (2) transport of the esters was very fast and flow-limited in contrast to the slow and barrier-limited transport of gallic acid; (3) the apparent distribution volume of n-propyl gallate, but probably also of methyl gallate and n-octyl gallate, greatly exceeded the water space in the liver, contrary to the gallic acid space which is smaller than the water space. It can be concluded that at low portal concentrations (<50μM) the gallic acid esters are 100% extracted during a single passage through the liver, releasing mainly gallic acid into the systemic circulation. For the latter a considerable time is required until complete biotransformation. The exposure of the liver to the esters, however, is quite prolonged due to extensive intracellular binding.

  18. 40 CFR 721.10565 - Ethanol, 2,2′-[[3-[(2-hydroxyethyl)amino]propyl]imino]bis-, N-(hydrogenated tallow alkyl) derivs.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Ethanol, 2,2â²- propyl]imino]bis-, N... Significant New Uses for Specific Chemical Substances § 721.10565 Ethanol, 2,2′- propyl]imino]bis-, N...) The chemical substance identified as ethanol, 2,2′- propyl]imino]bis-, N-(hydrogenated tallow...

  19. 40 CFR 721.10565 - Ethanol, 2,2′-[[3-[(2-hydroxyethyl)amino]propyl]imino]bis-, N-(hydrogenated tallow alkyl) derivs.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Ethanol, 2,2â²- propyl]imino]bis-, N... Significant New Uses for Specific Chemical Substances § 721.10565 Ethanol, 2,2′- propyl]imino]bis-, N...) The chemical substance identified as ethanol, 2,2′- propyl]imino]bis-, N-(hydrogenated tallow...

  20. Kinetics of tris (1-chloro-2-propyl) phosphate (TCIPP) metabolism in human liver microsomes and serum.

    PubMed

    Van den Eede, Nele; Tomy, Gregg; Tao, Fang; Halldorson, Thor; Harrad, Stuart; Neels, Hugo; Covaci, Adrian

    2016-02-01

    Tris(1-chloro-2-propyl) phosphate (TCIPP) is an emerging contaminant which is ubiquitous in the indoor and outdoor environment. Moreover, its presence in human body fluids and biota has been evidenced. Since no quantitative data exist on the biotransformation or stability of TCIPP in the human body, we performed an in vitro incubation of TCIPP with human liver microsomes (HLM) and human serum (HS). Two metabolites, namely bis(2-chloro-isopropyl) phosphate (BCIPP) and bis(1-chloro-2-propyl) 1-hydroxy-2-propyl phosphate (BCIPHIPP), were quantified in a kinetic study using HLM or HS (only BCIPP, the hydrolysis product) and LC-MS. The Michaelis-Menten model fitted best the NADPH-dependent formation of BCIPHIPP and BCIPP in HLM, with respective V(MAX) of 154 ± 4 and 1470 ± 110 pmol/min/mg protein and respective apparent K(m) of 80.2 ± 4.4 and 96.1 ± 14.5 μM. Hydrolases, which are naturally present in HLM, were also involved in the production of BCIPP. A HS paraoxonase assay could not detect any BCIPP formation above 38.6 ± 10.8 pmol/min/μL serum. Our data indicate that BCIPP is the major metabolite of TCIPP formed in the liver. To our knowledge, this is the first quantitative assessment of the stability of TCIPP in tissues of humans or any other species. Further research is needed to confirm whether these biotransformation reactions are associated with a decrease or increase in toxicity. PMID:26473552

  1. Endonucleolytic activity directed towards 8-(2-hydroxy-2-propyl) purines in double-stranded DNA.

    PubMed

    Livneh, Z; Elad, D; Sperling, J

    1979-11-01

    Photoalkylation of circular covalently closed DNA from phage PM2 with isopropyl alcohol by using a free radical photoinitiator and UV light of lambda greater than 305 nm led to the specific 8-substitution of purine moieties in the DNA, yielding 8-(2-hydroxy-2-propyl)adenine and 8-(2-hydroxy-2-propyl)guanine as the only detectable damage in the DNA. Using this specifically photoalkylated DNA as a substrate, we discovered in extracts of Micrococcus luteus an endonucleolytic activity that is directed towards 8-(2-hydroxy-2-propyl) purines in DNA. The activity is not a combination of a DNA-glycosylase and an apurinic site endonuclease. It is not inhibited by single-stranded DNA, by UV- or gamma-irradiated single-stranded DNA, or by normal or depurinated double-stranded DNA. however, gamma- or UV-(254 nm) irradiated double-stranded DNAs to inhibit the activity, hinting at the possibility of a common type of lesion in these damaged DNAs. Divalent cations are not required for the incising activity, and it is fully active in 1 mM EDTA, whereas caffeine and ATP cause inhibition. Extracts of mutant M. luteus lacking pyrimidine-dimer-directed endonucleases were found to contain the endonucleolytic activity in levels comparable to those present in the wild type. After the incision, we could demonstrate the specific excision of the 8-alkylated purines from the damaged DNA. The special conformational consequences of the 8-alkylation of purines, at the nucleotide level, namely their nonregular syn conformation, suggest that it is the distortion in the DNA that is recognized by the endonuclease. PMID:293658

  2. Antioxidant activity of propyl gallate in aqueous and lipid media: a theoretical study.

    PubMed

    Medina, Manuel E; Iuga, Cristina; Alvarez-Idaboy, Juan Raúl

    2013-08-21

    In this work, we have carried out a quantum chemistry and computational kinetics study on the reactivity of propyl gallate towards ˙OOH, ˙OOCH3 and ˙OOCHCH2 radicals, in aqueous and lipid media. We have considered three reaction mechanisms: hydrogen transfer (HT), radical adduct formation (RAF) and single electron transfer (SET). Rate constants and relative branching ratios for the different paths contributing to the overall reaction, at 298.15 K, are reported. Our results show that propyl gallate reacts mainly through the HT mechanism, independently of the solvent or the peroxyl radical, contrary to other phenols such as catechols and guayacols previously studied, which react mainly via the SET mechanism. In aqueous media at physiological pH, the calculated rate constants towards the ˙OOH, ˙OOCH3 and ˙OOCHCH2 radicals are 4.56 × 10(8), 1.59 × 10(6) and 4.05 × 10(8) M(-1) s(-1), while in lipid media the rate constants are 2.94 × 10(4), 7.73 × 10(3) and 9.94 × 10(5) M(-1) s(-1). Thus, a propyl gallate molecule acts as a very efficient peroxyl radical scavenger, both in aqueous and lipid media. Since the gallate moiety is a part of other naturally occurring polyphenols such as aflavine gallates and epigallocatechin gallates, the results of this study could be extrapolated to these compounds. Even if these compounds have other antioxidant structures or enhancers, the activity of the gallate moiety could be considered as a lower limit to their antioxidant activity.

  3. Complex microparticulate systems based on glycidyl methacrylate and xanthan.

    PubMed

    Lungan, Maria-Andreea; Popa, Marcel; Desbrieres, Jacques; Racovita, Stefania; Vasiliu, Silvia

    2014-04-15

    Porous microparticles based on glycidyl methacrylate, dimethacrylic monomers [ethylene glycol dimethacrylate, diethylene glycol dimethacrylate, triethylene glycol dimethacrylate] and xanthan gum were synthesized by aqueous suspension polymerization method in the presence of toluene as diluent using two types of initiators: benzoyl peroxide and ammonium persulfate. The G microparticles based on glycidyl methacrylate and dimethacrylic monomers and X microparticles based on glycidyl methacrylate, xanthan and dimethacrylic monomers were characterized by various techniques including FT-IR spectroscopy, TG analysis, SEM analysis and DVS method. The specific surface areas were determined by DVS method, while the copolymer porosities and pore volume were obtained from the apparent and skeletal densities. The results have indicated that xanthan was included in the crosslinked matrix by means of covalent bonds. X microparticles have a porous structure with higher specific surface area (129-44 m(2)/g) and higher sorption capacities compared with G microparticles (69-31 m(2)/g). PMID:24607180

  4. Allergic contact dermatitis to propyl gallate and pentylene glycol in an emollient cream.

    PubMed

    Foti, Caterina; Bonamonte, Domenico; Cassano, Nicoletta; Conserva, Anna; Vena, Gino A

    2010-05-01

    A 62-year-old man, with a 20-year history of seborrhoeic dermatitis, presented with a worsening of his dermatitis. He had previously been demonstrated to be allergic to various topical corticosteroids, so he had been using an emollient cream (Sebclair), containing piroctone olamine and various anti-inflammatory substances, for 6 months, with good effect. Patch testing to the cream and its ingredients revealed positive reactions to both propyl gallate and pentylene glycol. A positive reaction to propylene glycol was also detected, whereas patch testing to butylene glycol was negative. Complete remission followed avoidance of the offending substances. PMID:20546226

  5. 40 CFR 721.7200 - Perfluoroalkyl aromatic carbamate modified alkyl methacrylate copolymer.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... modified alkyl methacrylate copolymer. 721.7200 Section 721.7200 Protection of Environment ENVIRONMENTAL... alkyl methacrylate copolymer. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as perfluoroalkyl aromatic carbamate modified...

  6. 40 CFR 721.7200 - Perfluoroalkyl aromatic carbamate modified alkyl methacrylate copolymer.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... modified alkyl methacrylate copolymer. 721.7200 Section 721.7200 Protection of Environment ENVIRONMENTAL... alkyl methacrylate copolymer. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as perfluoroalkyl aromatic carbamate modified...

  7. 40 CFR 721.7200 - Perfluoroalkyl aromatic carbamate modified alkyl methacrylate copolymer.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... modified alkyl methacrylate copolymer. 721.7200 Section 721.7200 Protection of Environment ENVIRONMENTAL... alkyl methacrylate copolymer. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as perfluoroalkyl aromatic carbamate modified...

  8. 40 CFR 721.7200 - Perfluoroalkyl aromatic carbamate modified alkyl methacrylate copolymer.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... modified alkyl methacrylate copolymer. 721.7200 Section 721.7200 Protection of Environment ENVIRONMENTAL... alkyl methacrylate copolymer. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as perfluoroalkyl aromatic carbamate modified...

  9. 40 CFR 721.7200 - Perfluoroalkyl aromatic carbamate modified alkyl methacrylate copolymer.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... modified alkyl methacrylate copolymer. 721.7200 Section 721.7200 Protection of Environment ENVIRONMENTAL... alkyl methacrylate copolymer. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as perfluoroalkyl aromatic carbamate modified...

  10. DISPERSION POLYMERIZATION OF 2-HYDROXYETHYL METHACRYLATE IN SUPERCRITICAL CARBON DIOXIDE. (R826115)

    EPA Science Inventory

    Herein we report a successful dispersion polymerization of 2-hydroxyethyl methacrylate (HEMA) in a carbon dioxide continuous phase with a block copolymer consisting of polystyrene and poly(1,1-dihydroperfluorooctyl acrylate) as a stabilizer. Poly(2-hydroxyethyl methacrylate) was ...

  11. Structual Studies of Poly(Fluoroalkyl Methacrylate)s and Poly(Fluoroalkyl α-Fluoroacrylate)s

    NASA Astrophysics Data System (ADS)

    Koizumi, Shun; Ohmori, Akira; Shimizu, Tetuo; Iwami, Motohiro

    1992-10-01

    Poly(fluoroalkyl methacrylate)s and poly(fluoroalkyl α-fluoroacrylate)s with various fluoroalkyl groups were prepared. These polymers were characterized for tacticity by proton and fluorine nuclear magnetic resonance (1H and 19F NMR) and investigated by Electron Spectroscopy for Chemical Analysis (ESCA) to assign each signal. We found that tacticity of poly(fluoroalkyl α-fluoroacrylate)s were independent of the fluoroalkyl structure. The relationship between the structure of polymers and ESCA signals for all polymers was clarified. Also, we found an orientation effect of fluoroalkyl groups on the surface of the polymer films through the analysis of F1s ESCA signals.

  12. TiO2 nanowire FET device: encapsulation of biomolecules by electro polymerized pyrrole propylic acid.

    PubMed

    Chu, Yung-Ming; Lin, Chi-Chang; Chang, Hsien-Chang; Li, Changming; Guo, Chunxian

    2011-01-15

    Silane-based methods have become the standards for the conjugation of biomolecules, especially for the preparation of one-dimensional nanomaterial biosensors. However, the specific binding of those target molecules might raise problems with regard to the sensing and non-sensing regions, which may contaminate the sensing devices and decrease their sensitivity. This paper attempts to explore the encapsulation of biomolecules on a one-dimensional nanomaterial field effect transistor (FET) biosensor using polypyrrole propylic acid (PPa). Specifically, the encapsulation of biomolecules via the electropolymerization of pyrrole propylic acid (Pa), a self-made low-conductivity polymer, on TiO(2)-nanowire (NW)-based FETs is presented. The energy dispersive spectrum (EDS) was obtained and electrical analysis was conducted to investigate PPa entrapping anti-rabbit IgG (PPa/1°Ab) on a composite film. The specificity, selectivity and sensitivity of the sensor were analyzed in order to determine the immunoreaction of PPa/1°Ab immobilized NW biosensors. Our results show that PPa/1°Ab achieved high specificity immobilization on NWs under the EDS analysis. Furthermore, the TiO(2)-NW FET immunosensor developed in this work successfully achieved specificity, selectivity and sensitivity detection for the target protein rabbit IgG at the nano-gram level. The combination of PPa material and the electropolymerization method may provide an alternative method to immobilize biomolecules on a specific surface, such as NWs.

  13. 21 CFR 177.2000 - Vinylidene chloride/methyl acrylate/methyl methacrylate polymers.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... methacrylate polymers. 177.2000 Section 177.2000 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) INDIRECT FOOD ADDITIVES: POLYMERS Substances for Use as Basic.../methyl methacrylate polymers. The vinylidene chloride/methyl acrylate/methyl methacrylate polymers...

  14. 21 CFR 73.3127 - Vinyl alcohol/methyl methacrylate-dye reaction products.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Vinyl alcohol/methyl methacrylate-dye reaction... Vinyl alcohol/methyl methacrylate-dye reaction products. (a) Identity. The color additives are formed by... methacrylate-dye reaction product listed under this section into commerce shall submit to the Food and...

  15. 21 CFR 73.3127 - Vinyl alcohol/methyl methacrylate-dye reaction products.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 1 2011-04-01 2011-04-01 false Vinyl alcohol/methyl methacrylate-dye reaction... Vinyl alcohol/methyl methacrylate-dye reaction products. (a) Identity. The color additives are formed by... methacrylate-dye reaction product listed under this section into commerce shall submit to the Food and...

  16. 40 CFR 721.10375 - Hydroxypropyl methacrylate, reaction products with propylene oxide and ethylene oxide, copolymer...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Hydroxypropyl methacrylate, reaction... Substances § 721.10375 Hydroxypropyl methacrylate, reaction products with propylene oxide and ethylene oxide... reporting. (1) The chemical substance identified generically as hydroxypropyl methacrylate,...

  17. 21 CFR 73.3127 - Vinyl alcohol/methyl methacrylate-dye reaction products.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 1 2012-04-01 2012-04-01 false Vinyl alcohol/methyl methacrylate-dye reaction... Vinyl alcohol/methyl methacrylate-dye reaction products. (a) Identity. The color additives are formed by... methacrylate-dye reaction product listed under this section into commerce shall submit to the Food and...

  18. 40 CFR 721.10375 - Hydroxypropyl methacrylate, reaction products with propylene oxide and ethylene oxide, copolymer...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Hydroxypropyl methacrylate, reaction... Substances § 721.10375 Hydroxypropyl methacrylate, reaction products with propylene oxide and ethylene oxide... reporting. (1) The chemical substance identified generically as hydroxypropyl methacrylate,...

  19. 21 CFR 73.3127 - Vinyl alcohol/methyl methacrylate-dye reaction products.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 1 2013-04-01 2013-04-01 false Vinyl alcohol/methyl methacrylate-dye reaction... Vinyl alcohol/methyl methacrylate-dye reaction products. (a) Identity. The color additives are formed by... methacrylate-dye reaction product listed under this section into commerce shall submit to the Food and...

  20. 40 CFR 721.10375 - Hydroxypropyl methacrylate, reaction products with propylene oxide and ethylene oxide, copolymer...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Hydroxypropyl methacrylate, reaction... Substances § 721.10375 Hydroxypropyl methacrylate, reaction products with propylene oxide and ethylene oxide... reporting. (1) The chemical substance identified generically as hydroxypropyl methacrylate,...

  1. 21 CFR 73.3127 - Vinyl alcohol/methyl methacrylate-dye reaction products.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 1 2014-04-01 2014-04-01 false Vinyl alcohol/methyl methacrylate-dye reaction... Vinyl alcohol/methyl methacrylate-dye reaction products. (a) Identity. The color additives are formed by... methacrylate-dye reaction product listed under this section into commerce shall submit to the Food and...

  2. Crosslinked superhydrophobic films fabricated by simply casting poly(methyl methacrylate-butyl acrylate-hydroxyethyl methacrylate)-b-poly(perfluorohexylethyl methacrylate) solution

    NASA Astrophysics Data System (ADS)

    Wen, Xiufang; Ye, Chao; Cai, Zhiqi; Xu, Shouping; Pi, Pihui; Cheng, Jiang; Zhang, Lijuan; Qian, Yu

    2015-06-01

    This study focuses on the preparation of superhydrophobic films by crosslinkable polymer material-Poly(methyl methacrylate-butyl acrylate-hydroxyethyl methacrylate)-b-Poly(perfluorohexylethyl methacrylate) (P (MMA-BA-HEMA)-b-PFMA) with a simple one-step casting process. Nanoscale micelle particles with core-shell structure was obtained by dissolving the polymer and curing agent in the mixture of acetone and 1H, 1H, 5H octafluoropentyl-1,1,2,2 tetrafluoroethyl ether (FHT). Superhydrophobic films were fabricated by casting the micelle solution on the glass slides. By controlling the polymer concentration and acetone/FHT volume ratio, superhydrophobic polymer film with water contact angle of 153.2 ± 2.1° and sliding angle of 4° was obtained. By introducing a curing agent into the micelle solution, mechanical properties of the films can be improved. The adhension grade and hardness of the crosslinked superhydrophobic films reached 2 grade and 3H, respectively. The hydrophobicity is attributed to the synergistic effect of micro-submicro-nano-meter scale roughness by nanoscale micelle particles and low surface energy of fluoropolymer. This procedure makes it possible for widespread applications of superhydrophobic film due to its simplicity and practicability.

  3. Allergic contact dermatitis to methacrylates in ECG electrode dots.

    PubMed

    Lyons, Georgina; Nixon, Rosemary

    2013-02-01

    Acrylates are used widely in acrylic nails, dental restorative materials, paint, varnish, printing ink, adhesives, glue, orthopaedic prostheses, bone cement and diathermy pads. This is the first case of allergic contact dermatitis to methacrylates in electrocardiogram electrode dots reported in the literature.

  4. Synthesis of acrylates and methacrylates from coal-derived syngas

    SciTech Connect

    Spivey, J.J.; Gogate, M.R.; Jang, B.W.L.

    1995-12-31

    Acrylates and methacrylates are among the most widely used chemical intermediates in the world. One of the key chemicals of this type is methyl methacrylate. Of the 4 billion pounds produced each year, roughly 85% is made using the acetone-cyanohydrin process, which requires handling of large quantities of hydrogen cyanide and produces ammonium sulfate wastes that pose an environmental disposal challenge. The U.S. Department of Energy and Eastman Chemical Company are sharing the cost of research to develop an alternative process for the synthesis of methyl methacrylate from syngas. Research Triangle Institute is focusing on the synthesis and testing of active catalysts for the condensation reactions, and Bechtel is analyzing the costs to determine the competitiveness of several process alternatives. Results thus far show that the catalysts for the condensation of formaldehyde and the propionate are key to selectively producing the desired product, methacrylic acid, with a high yield. These condensation catalysts have both acid and base functions and the strength and distribution of these acid-base sites controls the product selectivity and yield.

  5. 21 CFR 172.775 - Methacrylic acid-divinylbenzene copolymer.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Methacrylic acid-divinylbenzene copolymer. 172.775 Section 172.775 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) FOOD ADDITIVES PERMITTED FOR DIRECT ADDITION TO FOOD...

  6. 21 CFR 177.1830 - Styrene-methyl methacrylate copolymers.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Styrene-methyl methacrylate copolymers. 177.1830 Section 177.1830 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) INDIRECT FOOD ADDITIVES: POLYMERS Substances for Use as Basic Components of Single and...

  7. Release of Water Soluble Drugs from Dynamically Swelling POLY(2-HYDROXYETHYL Methacrylate - CO - Methacrylic Acid) Hydrogels.

    NASA Astrophysics Data System (ADS)

    Kou, Jim Hwai-Cher

    In this study, ionizable copolymers of HEMA and methacrylic acid (MA) are investigated for their potential use in developing pH dependent oral delivery systems. Because of the MA units, these gels swell extensively at high pH. Since solute diffusion in the hydrophilic polymers depends highly on the water content of the matrix, it is anticipated that the release rate will be modulated by this pH induced swelling. From a practical point of view, the advantage of the present system is that one can minimize drug loss in the stomach and achieve a programmed release in intestine. This approach is expected to improve delivery of acid labile drugs or drugs that cause severe gastrointestinal side effects. This work mainly focuses on the basic understanding of the mechanism involved in drug release from the poly(HEMA -co- MA) gels, especially under dynamic swelling conditions. Equilibrium swelling is first characterized since water content is the major determinant of transport properties in these gels. Phenylpropanolamine (PPA) is chosen as the model drug for the release study and its diffusion characteristics in the gel matrix determined. The data obtained show that the PPA diffusivity follows the free volume theory of Yasuda, which explains the accelerating effect of swelling on drug release. A mathematical model based on a diffusion mechanism has been developed to describe PPA release from the swelling gels. Based on this model, several significant conclusions can be drawn. First, the release rate can be modulated by the aspect ratio of the cylindrical geometry, and this has a practical implication in dosage form design. Second, the release rate can be lowered quite considerably if the dimensional increase due to swelling is significant. Consequently, it is the balance between the drug diffusivity increase and the gel dimensional growth that determines the release rate from the swelling matrix. Third, quasi-steady release kinetics, which are characteristic of swelling

  8. Effect of reaction parameters on synthesis of citronellyl methacrylate by lipase-catalyzed transesterification.

    PubMed

    Athawale, Vilas; Manjrekar, Narendra; Athawale, Manoj

    2003-01-01

    The methacrylate ester of citronellol was synthesized using various lipases as catalyst. The effect of different reaction parameters such as amount of lipase, solvent, temperature, and acylating agent on the conversion of citronellol to citronellyl methacrylate was studied. Methyl methacrylate, vinyl methacrylate, and 2,3-butanedione mono-oxime methacrylate were used as acylating agents. Porcine pancreatic lipase (PPL), Candida rugosa lipase (CRL), and Pseudomonas cepacia lipase (Amano-PS) were used as biocatalysts. Diisopropyl ether (DIPE) was found to be the most suitable solvent. The stereoselectivity of CRL in transesterification of (+/-)-citronellol was tested for the optimized reaction parameters.

  9. Polymerization contraction and conversion of light-curing BisGMA-based methacrylate resins.

    PubMed

    Venhoven, B A; de Gee, A J; Davidson, C L

    1993-09-01

    The aim of this study was to investigate the polymerization contraction and the conversion of light-curing methacrylate resins based on bisphenol-A bis(2-hydroxypropyl)methacrylate (BisGMA) diluted with triethylene glycol dimethyacrylate (TEGDMA), methyl methacrylate (MMA), hydroxypropyl methacrylate (HPMA) or (+/-)-2-ethylhexyl methacrylate (EHMA). The contraction measurements were carried out with a linometer, a simple device to determine true linear polymerization contraction of liquid monomers at ambient temperature. The contraction increased with the amount of diluting monomer. The estimated conversion of the BisGMA-TEGDMA, calculated using the contraction, is consistent with literature values. The BisGMA-HPMA mixtures showed high conversions at moderate contraction.

  10. The Use of Chlorhexidine/n-Propyl Gallate (CPG) as an Ambient-Temperature Urine Preservative

    NASA Technical Reports Server (NTRS)

    Nillen, Jeannie L.; Smith, Scott M.

    2003-01-01

    A safe, effective ambient temperature urine preservative, chlorhexidine/n-propyl gallate (CPG), has been formulated for use during spacefli ght that reduces the effects of oxidation and bacterial contamination on sample integrity while maintaining urine pH. The ability of this preservative to maintain stability of nine key analytes was evaluated for a period of one year. CPG effectively maintained stability of a mmonia, total nitrogen, 3-methylhistidine, chloride, sodium, potassiu m, and urea; however, creatinine and osmolality were not preserved by CPG. These data indicate that CPG offers prolonged room-temperature storage for multiple urine analytes, reducing the requirements for f rozen urine storage on future spaceflights. Iii medical applications on Earth, this technology can allow urine samples to be collected in remote settings and eliminate the need to ship frozen samples.

  11. Boronic acid-functionalized core-shell-shell magnetic composite microspheres for the selective enrichment of glycoprotein.

    PubMed

    Pan, Miaorong; Sun, Yangfei; Zheng, Jin; Yang, Wuli

    2013-09-11

    In this work, core-shell-shell-structured boronic acid-functionalized magnetic composite microspheres Fe3O4@SiO2@poly (methyl methacrylate-co-4-vinylphenylbornoic acid) (Fe3O4@SiO2@P(MMA-co-VPBA)) with a uniform size and fine morphology were synthesized. Here, Fe3O4 magnetic particles were prepared by a solvothermal reaction, whereas the Fe3O4@SiO2 microspheres with a core-shell structure were obtained by a sol-gel process. 3-(Trimethoxysilyl) propyl methacrylate (MPS)-modified Fe3O4@SiO2 was used as the seed in the emulsion polymerization of MMA and VPBA to form the core-shell-shell-structured magnetic composite microspheres. As the boronic acid groups on the surface of Fe3O4@SiO2@P(MMA-co-VPBA) could form tight yet reversible covalent bonds with the cis-1,2-diols groups of glycoproteins, the magnetic composite microspheres were applied to enrich a standard glycoprotein, horseradish peroxidase (HRP), and the results demonstrated that the composite microspheres have a higher affinity for the glycoproteins in the presence of the nonglycoprotein bovine serum albumin (BSA) over HRP. Additionally, different monomer mole ratios of MMA/VPBA were studied, and the results implied that using MMA as the major monomer could reduce the amount of VPBA with a similar glycoprotein enrichment efficiency but a lower cost. PMID:23924282

  12. Organic overlayer model of a dental composite analyzed by laser desorption postionization mass spectrometry and photoemission.

    PubMed

    Zhou, Manshui; Wu, Chunping; Edirisinghe, Praneeth D; Drummond, James L; Hanley, Luke

    2006-04-01

    Some dental composites consist of a polymerizable resin matrix bound to glass filler particles by silane coupling agents. The resin in these composites includes bisphenol A diglycidyl methacrylate (Bis-GMA) as well as other organic components. Silane coupling agents such as 3-(trimethoxysilyl) propyl methacrylate (MPS) have been used to improve the mechanical properties of the dental composites by forming a covalent bond between the glass filler particles and the resin. These resin-glass composites undergo material property changes during exposure to the oral environment, but degradation studies of the commercial composites are severely limited by their chemical complexity. A simplified model of the dental composite has been developed, which captures the essential chemical characteristics of the filler particle-silane-resin interface. This model system consists of the resin matrix compound Bis-GMA covalently bound via a methacryloyl overlayer to amorphous silicon oxide (SiO2) surface via a siloxane bond. Scanning electron microscopy shows the porous characteristic and elemental composition of the SiO2 film, which approximately mimics that of the glass filler particles used in dental composites. LDPI MS and XPS verify the chemistry and morphology of the Bis-GMA-methacryloyl overlayer. Preliminary results demonstrate that LDPI MS will be able to follow the chemical processes resulting from aging Bis-GMA-methacryloyl overlayers aged in water, artificial saliva, or other aging solutions.

  13. Preparation and evaluation of dual-enzyme microreactor with co-immobilized trypsin and chymotrypsin.

    PubMed

    Meller, Kinga; Pomastowski, Paweł; Grzywiński, Damian; Szumski, Michał; Buszewski, Bogusław

    2016-04-01

    The preparation of capillary microfluidic reactor with co-immobilized trypsin and chymotrypsin with the use of a low-cost commercially available enzymatic reagent (containing these proteases) as well as the evaluation of its usefulness in proteomic research were presented. The monolithic copolymer synthesized from glycidyl methacrylate (GMA) and ethylene glycol dimethacrylate (EDMA) was used as a support. Firstly, the polymerization conditions were optimized and the monolithic bed was synthesized in the fused silica capillary modified with 3-(trimethoxysilyl)propyl methacrylate (γ-MAPS). The polymer containing epoxy groups was then modified with 1,6-diaminohexane, followed by the attachment of glutaraldehyde and immobilization of enzymes. The efficiency of the prepared monolithic Immobilized Enzyme Microreactor (μ-IMER) with regard to trypsin activity was evaluated using the low-molecular mass compound (Nα-benzoyl-l-arginine ethyl ester, BAEE). The activities of both enzymes were investigated using a macromolecular protein (human transferrin, Tf) as a substrate. In the case of BAEE, the reaction product was separated from the substrate using the capillary liquid chromatography and the efficiency of the reaction was determined by the peak area of the substrate. The hydrolysis products of transferrin were analyzed with MALDI-TOF which allows for the verification of the prepared enzymatic system applicability in the field of proteomic research. PMID:26947160

  14. Large-area electrochromic coatings: Composites of polyaniline and polyacrylate-silica hybrid sol-gel materials

    SciTech Connect

    Jang, G.W.; Chen, C.; Gumbs, R.W.; Wei, Y.; Yeh, J.M.

    1996-08-01

    A low-cost technique for fabricating large-area electrochromic coatings is described. Polyaniline was incorporated into polyacrylate-silica hybrid sol-gel networks using suspended particles or solutions. A solution of polyaniline and poly[methyl methacrylate-co-3-(trimethoxysilyl)propyl methacrylate] can be spray- or brush-coated on transparent indium-tin oxide substrates to form robust electrochromic coatings. Silane functional groups on the polyacrylate chain act as coupling and cross-linking agents to improve surface adhesion and mechanical properties of the resulting composite coatings. These coatings showed reversible transparent to green color change when polarized at potentials between {minus}0.4 and +0.4 V vs. Ag/AgCl in a 0.2 M LiClO{sub 4}/acetonitrile electrolyte solution. The cycle lifetimes of polyaniline films were improved by incorporating the polymer in the polyacrylate-silica matrix. Electrochromic switching was demonstrated for the composite coatings in large-area all-solid-state devices.

  15. Investigation of Methacrylic Acid at High Pressure Using Neutron Diffraction.

    PubMed

    Marshall, William G; Urquhart, Andrew J; Oswald, Iain D H

    2015-09-10

    This article shows that pressure can be a low-intensity route to the synthesis of polymethacrylic acid. The exploration of perdeuterated methacrylic acid at high pressure using neutron diffraction reveals that methacrylic acid exhibits two polymorphic phase transformations at relatively low pressures. The first is observed at 0.39 GPa, where both phases were observed simultaneously and confirm our previous observations. This transition is followed by a second transition at 1.2 GPa to a new polymorph that is characterized for the first time. On increasing pressure, the diffraction pattern of phase III deteriorates significantly. On decompression phase III persists to 0.54 GPa before transformation to the ambient pressure phase. There is significant loss of signal after decompression, signifying that there has been a loss of material through polymerization. The orientation of the molecules in phase III provides insight into the possible polymerization reaction. PMID:26289930

  16. SYNTHESIS OF METHACRYLATES FROM COAL-DERIVED SYNGAS

    SciTech Connect

    Jang, B.W.L.; Spivey, J.J.; Gogate, M.R.; Zoeller, J.R.; Colberg, R.D.; Choi, G.N.

    1999-12-01

    Research Triangle Institute (RTI), Eastman Chemical Company, and Bechtel have developed a novel process for synthesis of methyl methacrylate (MMA) from coal-derived syngas, under a contract from the US Department of Energy/Fossil Energy Technology Center (DOE/FETC). This project has resulted in five US patents (four already published and one pending publication). It has served as the basis for the technical and economic assessment of the production of this high-volume intermediate from coal-derived synthesis gas. The three-step process consists of the synthesis of a propionate from ethylene carbonylation using coal-derived CO, condensation of the propionate with formaldehyde to form methacrylic acid (MAA); and esterification of MAA with methanol to yield MMA. The first two steps, propionate synthesis and condensation catalysis, are the key technical challenges and the focus of the research presented here.

  17. SYNTHESIS OF METHYL METHACRYLATE FROM COAL-DERIVED SYNGAS

    SciTech Connect

    Makarand R. Gogate; James J. Spivey; Joseph R. Zoeller; Richard D. Colberg; Gerald N. Choi; Samuel S. Tam

    1999-04-21

    Research Triangle Institute (RTI), Eastman Chemical Company, and Bechtel collectively are developing a novel three-step process for the synthesis of methyl methacrylate (MMA) from coal-derived syngas that consists of the steps of synthesis of a propionate, its condensation with formaldehyde to form methacrylic acid (MAA), and esterification of MAA with methanol to produce MMA. The research team has completed the research on the three-step methanol-based route to MMA. Under an extension to the original contract, we are currently evaluating a new DME-based process for MMA. The key research need for DME route is to develop catalysts for DME partial oxidation reactions and DME condensation reactions. Over the last quarter (January-March/99), in-situ formaldehyde generation and condensation with methyl propionate were tested over various catalysts and reaction conditions. The patent application is in preparation and the results are retained for future reports.

  18. Physical properties of agave cellulose graft polymethyl methacrylate

    SciTech Connect

    Rosli, Noor Afizah; Ahmad, Ishak; Abdullah, Ibrahim; Anuar, Farah Hannan

    2013-11-27

    The grafting polymerization of methyl methacrylate and Agave cellulose was prepared and their structural analysis and morphology were investigated. The grafting reaction was carried out in an aqueous medium using ceric ammonium nitrate as an initiator. The structural analysis of the graft copolymers was carried out by Fourier transform infrared and X-ray diffraction. The graft copolymers were also characterized by field emission scanning electron microscopy (FESEM). An additional peak at 1732 cm{sup −1} which was attributed to the C=O of ester stretching vibration of poly(methyl methacrylate), appeared in the spectrum of grafted Agave cellulose. A slight decrease of crystallinity index upon grafting was found from 0.74 to 0.68 for cellulose and grafted Agave cellulose, respectively. Another evidence of grafting showed in the FESEM observation, where the surface of the grafted cellulose was found to be roughed than the raw one.

  19. Preparation and characterization of methacrylate hydrogels for zeta potential control

    NASA Technical Reports Server (NTRS)

    Gregonis, D. E.; Ma, S. M.; Vanwagenen, R.; Andrade, J. D.

    1976-01-01

    A technique based on the measurement of streaming potentials has been developed to evaluate the effects of hydrophilic coatings on electroosmotic flow. The apparatus and procedure are described as well as some results concerning the electrokinetic potential of glass capillaries as a function of ionic strength, pH, and temperature. The effect that turbulence and entrance flow conditions have on accurate streaming potential measurements is discussed. Various silane adhesion promoters exhibited only a slight decrease in streaming potential. A coating utilizing a glycidoxy silane base upon which methylcellulose is applied affords a six-fold decrease over uncoated tubes. Hydrophilic methacrylate gels show similar streaming potential behavior, independent of the water content of the gel. By introduction of positive or negative groups into the hydrophilic methacrylate gels, a range of streaming potential values are obtained having absolute positive or negative signs.

  20. Physical properties of agave cellulose graft polymethyl methacrylate

    NASA Astrophysics Data System (ADS)

    Rosli, Noor Afizah; Ahmad, Ishak; Abdullah, Ibrahim; Anuar, Farah Hannan

    2013-11-01

    The grafting polymerization of methyl methacrylate and Agave cellulose was prepared and their structural analysis and morphology were investigated. The grafting reaction was carried out in an aqueous medium using ceric ammonium nitrate as an initiator. The structural analysis of the graft copolymers was carried out by Fourier transform infrared and X-ray diffraction. The graft copolymers were also characterized by field emission scanning electron microscopy (FESEM). An additional peak at 1732 cm-1 which was attributed to the C=O of ester stretching vibration of poly(methyl methacrylate), appeared in the spectrum of grafted Agave cellulose. A slight decrease of crystallinity index upon grafting was found from 0.74 to 0.68 for cellulose and grafted Agave cellulose, respectively. Another evidence of grafting showed in the FESEM observation, where the surface of the grafted cellulose was found to be roughed than the raw one.

  1. Jumplike deformation of γ-irradiated polymethyl methacrylate

    NASA Astrophysics Data System (ADS)

    Peschanskaya, N. N.; Smolyanskiĭ, A. S.; Shvedov, A. S.

    2009-06-01

    Nonuniformity of the microdeformation rate and the parameters of microdeformation jumps were studied in the creep regime for a polymethyl methacrylate irradiated by various dozes of the Co-60 γ radiation. The creep rate during compression of the polymethyl methacrylate was measured by an interferogram on 300-nm deformation increments. It is shown that the periods L of rate oscillations (jumps of deformation) on three scale levels are dependent on the irradiation doze and are also changed after prolonged exposure of samples in air. In the doze range 0 to 330 kGy, both a decrease and an increase in L are observed, which corresponds to the unstable kinetics of radiation chemical processes. The deformation jumps permit estimates of the radiation effect on various structural levels. It is concluded that the effect of radiation on coarser microstructural formations is the largest.

  2. Synthesis and characterization of magnetic poly(glycidyl methacrylate) microspheres

    NASA Astrophysics Data System (ADS)

    Horák, Daniel; Petrovský, Eduard; Kapička, Aleš; Frederichs, Theodor

    2007-04-01

    Magnetic nanoparticles encapsulated in poly(glycidyl methacrylate) microspheres were prepared and their detailed structural and magnetic characteristics given. Iron oxide nanoparticles were obtained by chemical coprecipitation of Fe(II) and Fe(III) salts and stabilized with dextran, (carboxymethyl)dextran or tetramethylammonium hydroxide. The microspheres were prepared by emulsion or dispersion polymerization of glycidyl methacrylate in the presence of ferrofluid. The microspheres were uniform both in shape and usually also in size; their size distribution was narrow. All the magnetic parameters confirm superparamagnetic nature of the microspheres. Blocking temperature was not observed, suggesting the absence of magnetic interactions at low temperatures. This is most probably caused by complete encapsulation and the absence of agglomeration. Such microspheres can be used in biomedical applications.

  3. Preparation and recovery of methacrylic acid and its esters

    SciTech Connect

    Frank, P.J.; Hite, J.R.

    1986-07-15

    This patent describes a process for the vapor phase catalytic oxydehydrogenation of isobutyric acid or its esters to form methacrylic acid or its esters wherein the gaseous product is condensed and purified. The improvement described here consists of adding to the gaseous product at or about the point of its condensation from 1 to 6000 ppm of a surfactant material selected from the group consisting of an anionic a cationic and non-ionic surfactant.

  4. Catalytic esterification of methacrylic acid with methyl alcohol

    SciTech Connect

    Lunin, A.F.; Zheleznaya, L.L.; Karakhanov, R.A.; Meshcheryakov, S.V.; Magadov, R.S.; Mkrtychan, V.R.; Fomin, V.A.

    1987-08-10

    The authors contend that virtually all methods for the production of methacrylic acid esters suffer from the drawbacks of low conversion, dependence on costly catalysts, low feed rates, and the need to use inhibitors in the process. To eliminate these drawbacks, they propose and test a new catalyst, sulfopolyphenyl ketone, which contains an extensive conjugated bond system together with ionic hydroxide groups. The catalytic esterification rate and yield is given for this catalyst and chromatography is performed for the resulting esters.

  5. Methacrylate monolith chromatography as a tool for waterborne virus removal.

    PubMed

    Rački, N; Kramberger, P; Steyer, A; Gašperšič, J; Štrancar, A; Ravnikar, M; Gutierrez-Aguirre, I

    2015-02-13

    Enteric viruses are commonly present in environmental waters and represent the major cause of waterborne infections and outbreaks. Since traditional wastewater treatments fail to remove enteric viruses in the water purification process, they are released daily into environmental waters. Monolithic supports have enabled chromatography to enter the field of virology. They have been successfully used in virus purification and concentration. In this work quaternary amine (QA) methacrylate monoliths were exploited to remove enteric viruses from wastewater treatment plant effluent. Expectedly, chromatographic processing of such a complex medium was troublesome, even for monoliths, characterized by extremely large pore dimensions. This problem was solved by introducing a pre-step chromatography using hydroxyl (OH) methacrylate monoliths. This way, molecules, that would hinder virus binding to the anion-exchanger monolith, were removed. As a result, the OH pre-column reduced backpressure increase on the subsequent anion-exchanger column, and increased both QA column binding capacity and life time. Wastewater effluent samples were successfully purified from five waterborne enteric viruses (rotavirus, norovirus genogroup I and II, astrovirus, sapovirus), below the detection limit of RT-qPCR. The breakthrough of the rotavirus binding capacity was not reached for concentrations that significantly exceeded those expected in effluent waters. The obtained results confirm that methacrylate monoliths can be a valuable tool for simultaneous removal of different waterborne viruses from contaminated water sources.

  6. Magnetic poly(glycidyl methacrylate) microspheres for protein capture.

    PubMed

    Koubková, Jana; Müller, Petr; Hlídková, Helena; Plichta, Zdeněk; Proks, Vladimír; Vojtěšek, Bořivoj; Horák, Daniel

    2014-09-25

    The efficient isolation and concentration of protein antigens from complex biological samples is a critical step in several analytical methods, such as mass spectrometry, flow cytometry and immunochemistry. These techniques take advantage of magnetic microspheres as immunosorbents. The focus of this study was on the development of new superparamagnetic polymer microspheres for the specific isolation of the tumor suppressor protein p53. Monodisperse macroporous poly(glycidyl methacrylate) (PGMA) microspheres measuring approximately 5 μm and containing carboxyl groups were prepared by multistep swelling polymerization of glycidyl methacrylate (GMA), 2-[(methoxycarbonyl)methoxy]ethyl methacrylate (MCMEMA) and ethylene dimethylacrylate (EDMA) as a crosslinker in the presence of cyclohexyl acetate as a porogen. To render the microspheres magnetic, iron oxide was precipitated within their pores; the Fe content in the particles received ∼18 wt%. Nonspecific interactions between the magnetic particles and biological media were minimized by coating the microspheres with poly(ethylene glycol) (PEG) terminated by carboxyl groups. The carboxyl groups of the magnetic PGMA microspheres were conjugated with primary amino groups of mouse monoclonal DO-1 antibody using conventional carbodiimide chemistry. The efficiency of protein p53 capture and the degree of nonspecific adsorption on neat and PEG-coated magnetic microspheres were determined by western blot analysis.

  7. Different in vitro and in vivo behaviors between Poly(carboxybetaine methacrylate) and poly(sulfobetaine methacrylate).

    PubMed

    Lin, Weifeng; Ma, Guanglong; Wu, Jiang; Chen, Shengfu

    2016-10-01

    Poly(sulfobetaine methacrylate) (pSBMA) and poly(carboxybetaine methacrylate) (pCBMA) are two well-known zwitterionic polymers known for their excellent antifouling properties. In this work, these two zwitterionic polymers were compared both in vitro and in vivo. Both of them exhibited excellent antifouling properties and low macrophage uptake although there were negligible differences in resistance to nonspecific protein adsorption of their hydrogels and cell internalization of their star polymers. However, it is found that the β- Cyclodextrin-CBMA (CD-CBMA) showed a circulation time one order of magnitude longer than CD-SBMA, which implied that small differences in vitro may lead to a dramatic difference in vivo. This work demonstrated that pCBMA showed greater potential than pSBMA in biomedical applications.

  8. Different in vitro and in vivo behaviors between Poly(carboxybetaine methacrylate) and poly(sulfobetaine methacrylate).

    PubMed

    Lin, Weifeng; Ma, Guanglong; Wu, Jiang; Chen, Shengfu

    2016-10-01

    Poly(sulfobetaine methacrylate) (pSBMA) and poly(carboxybetaine methacrylate) (pCBMA) are two well-known zwitterionic polymers known for their excellent antifouling properties. In this work, these two zwitterionic polymers were compared both in vitro and in vivo. Both of them exhibited excellent antifouling properties and low macrophage uptake although there were negligible differences in resistance to nonspecific protein adsorption of their hydrogels and cell internalization of their star polymers. However, it is found that the β- Cyclodextrin-CBMA (CD-CBMA) showed a circulation time one order of magnitude longer than CD-SBMA, which implied that small differences in vitro may lead to a dramatic difference in vivo. This work demonstrated that pCBMA showed greater potential than pSBMA in biomedical applications. PMID:27459415

  9. Densities and vapor-liquid equilibria in binary mixtures formed by propyl methanoate + ethanol, + propan-1-ol, and + butan-1-ol at 160.0 kPa

    SciTech Connect

    Falcon, J.; Ortega, J.; Gonzalez, E.

    1996-07-01

    Densities and excess volumes were determined at 298.15 K for propyl methanoate + ethanol, + propan-1-ol, and + butan-1-ol. The results of those quantities were then correlated to get the concentrations of vapor-liquid equilibrium obtained isobarically at 160 kPa for the same mixtures. Two mixtures show azeotropes: for propyl methanoate (1) + ethanol (2), x{sub 1} = 0.443 at T = 358.7 K; and for propyl methanoate (1) + propan-1-ol (2), x{sub 1} = 0.762 at T = 368.2 K. The mixtures are thermodynamically consistent, and the predictions made using several group-contribution models are satisfactory.

  10. Micro- and nanostructured poly[oligo(ethylene glycol)methacrylate] brushes grown from photopatterned halogen initiators by atom transfer radical polymerization.

    PubMed

    Ahmad, Shah Alang; Leggett, Graham J; Hucknall, Angus; Chilkoti, Ashutosh

    2011-03-01

    Photolithographic techniques have been used to fabricate polymer brush micro- and nanostructures. On exposure to UV light with a wavelength of 244 nm, halogens were selectively removed from films of chloromethylphenyltrichlorosilane and 3-(2-bromoisobutyramido)propyl-triethoxysilane on silicon dioxide. Patterning was achieved at the micrometer scale, by using a mask in conjunction with the incident laser beam, and at the nanometer scale, by utilizing interferometric lithography (IL). Friction force microscopy images of patterned surfaces exhibited frictional contrast due to removal of the halogen but no topographical contrast. In both cases the halogenated surface was used as an initiator for surface atom-transfer radical polymerization. Patterning of the surface by UV lithography enabled the definition of patterns of initiator from which micro- and nanostructured poly[oligo(ethylene glycol)methacrylate] bottle brushes were grown. Micropatterned brushes formed on both surfaces exhibited excellent resistance to protein adsorption, enabling the formation of protein patterns. Using IL, brush structures were formed that covered macroscopic areas (approximately 0.5 cm²) but exhibited a full width at half maximum height as small as 78 nm, with a period of 225 nm. Spatially selective photolytic removal of halogens that are immobilized on a surface thus appears to be a simple, rapid, and versatile method for the formation of micro- and nanostructured polymer brushes and for the control of protein adsorption.

  11. LC50 values for rats acutely exposed to vapors of acrylic and methacrylic acid esters

    SciTech Connect

    Oberly, R.; Tansy, M.F.

    1985-01-01

    Acute exposure studies were conducted using adult male Sprague-Dawley rats to obtain LC50/24 concentrations for the common esters of acrylic and methacrylic acids. The order of acute toxicity was determined to be methyl acrylate > ethyl acrylate > butyl acrylate > butyl methacrylate > methyl methacrylate > ethyl methacrylate. Four-hour daily exposures (excluding weekends) of young adult male rats to 110 ppm methyl acrylate in air over a period of 32 d failed to produce significant differences in body or tissue weights, blood chemistries, gross metabolic performance, and spontaneous small-intestinal motor activities when compared with a sham-exposed group.

  12. SBA-15 mesoporous silica free-standing thin films containing copper ions bounded via propyl phosphonate units - preparation and characterization

    NASA Astrophysics Data System (ADS)

    Laskowski, Lukasz; Laskowska, Magdalena; Jelonkiewicz, Jerzy; Dulski, Mateusz; Wojtyniak, Marcin; Fitta, Magdalena; Balanda, Maria

    2016-09-01

    The SBA-15 silica thin films containing copper ions anchored inside channels via propyl phosphonate groups are investigated. Such materials were prepared in the form of thin films, with hexagonally arranged pores, laying rectilinear to the substrate surface. However, in the case of our thin films, their free standing form allowed for additional research possibilities, that are not obtainable for typical thin films on a substrate. The structural properties of the samples were investigated by X-ray reflectometry, atomic force microscopy (AFM) and transmission electron microscopy (TEM). The molecular structure was examined by Raman spectroscopy supported by numerical simulations. Magnetic measurements (SQUID magnetometry and EPR spectroscopy) showed weak antiferromagnetic interactions between active units inside silica channels. Consequently, the pores arrangement was determined and the process of copper ions anchoring by propyl phosphonate groups was verified in unambiguous way. Moreover, the type of interactions between magnetic atoms was determined.

  13. Phase diagram of the iodine-sodium iodide-water-propyl alcohol system at 298.15 K

    NASA Astrophysics Data System (ADS)

    Rubtsova, E. M.; Varlamova, T. M.; Monakhova, Y. B.; Mushtakova, S. P.

    2015-06-01

    Phase equilibria in the cross sections of isothermal-isobaric sections of the phase diagram of four-component iodine-potassium iodide-water-propyl alcohol are investigated at 298.15 K and pressure of 101325 Pa. It is shown that a three-phase equilibrium of the eutonic type occurs in the cross sections containing (I) 10 and (II) 30 wt % of propyl alcohol, and two three-phase equilibria of the monotectic type are found in cross section II. It is shown that the solid phases of saturated solutions in the investigated cross sections are potassium iodide and crystalline iodine. The compositions of the mixed solvents with the strongest iodine dissolving ability relative to individual solvents are established.

  14. Pathologically activated neuroprotection via uncompetitive blockade of N-methyl-D-aspartate receptors with fast off-rate by novel multifunctional dimer bis(propyl)-cognitin.

    PubMed

    Luo, Jialie; Li, Wenming; Zhao, Yuming; Fu, Hongjun; Ma, Dik-Lung; Tang, Jing; Li, Chaoying; Peoples, Robert W; Li, Fushun; Wang, Qinwen; Huang, Pingbo; Xia, Jun; Pang, Yuanping; Han, Yifan

    2010-06-25

    Uncompetitive N-methyl-d-aspartate (NMDA) receptor antagonists with fast off-rate (UFO) may represent promising drug candidates for various neurodegenerative disorders. In this study, we report that bis(propyl)-cognitin, a novel dimeric acetylcholinesterase inhibitor and gamma-aminobutyric acid subtype A receptor antagonist, is such an antagonist of NMDA receptors. In cultured rat hippocampal neurons, we demonstrated that bis(propyl)-cognitin voltage-dependently, selectively, and moderately inhibited NMDA-activated currents. The inhibitory effects of bis(propyl)-cognitin increased with the rise in NMDA and glycine concentrations. Kinetics analysis showed that the inhibition was of fast onset and offset with an off-rate time constant of 1.9 s. Molecular docking simulations showed moderate hydrophobic interaction between bis(propyl)-cognitin and the MK-801 binding region in the ion channel pore of the NMDA receptor. Bis(propyl)-cognitin was further found to compete with [(3)H]MK-801 with a K(i) value of 0.27 mum, and the mutation of NR1(N616R) significantly reduced its inhibitory potency. Under glutamate-mediated pathological conditions, bis(propyl)-cognitin, in contrast to bis(heptyl)-cognitin, prevented excitotoxicity with increasing effectiveness against escalating levels of glutamate and much more effectively protected against middle cerebral artery occlusion-induced brain damage than did memantine. More interestingly, under NMDA receptor-mediated physiological conditions, bis(propyl)-cognitin enhanced long-term potentiation in hippocampal slices, whereas MK-801 reduced and memantine did not alter this process. These results suggest that bis(propyl)-cognitin is a UFO antagonist of NMDA receptors with moderate affinity, which may provide a pathologically activated therapy for various neurodegenerative disorders associated with NMDA receptor dysregulation. PMID:20404346

  15. Pathologically activated neuroprotection via uncompetitive blockade of N-methyl-D-aspartate receptors with fast off-rate by novel multifunctional dimer bis(propyl)-cognitin.

    PubMed

    Luo, Jialie; Li, Wenming; Zhao, Yuming; Fu, Hongjun; Ma, Dik-Lung; Tang, Jing; Li, Chaoying; Peoples, Robert W; Li, Fushun; Wang, Qinwen; Huang, Pingbo; Xia, Jun; Pang, Yuanping; Han, Yifan

    2010-06-25

    Uncompetitive N-methyl-d-aspartate (NMDA) receptor antagonists with fast off-rate (UFO) may represent promising drug candidates for various neurodegenerative disorders. In this study, we report that bis(propyl)-cognitin, a novel dimeric acetylcholinesterase inhibitor and gamma-aminobutyric acid subtype A receptor antagonist, is such an antagonist of NMDA receptors. In cultured rat hippocampal neurons, we demonstrated that bis(propyl)-cognitin voltage-dependently, selectively, and moderately inhibited NMDA-activated currents. The inhibitory effects of bis(propyl)-cognitin increased with the rise in NMDA and glycine concentrations. Kinetics analysis showed that the inhibition was of fast onset and offset with an off-rate time constant of 1.9 s. Molecular docking simulations showed moderate hydrophobic interaction between bis(propyl)-cognitin and the MK-801 binding region in the ion channel pore of the NMDA receptor. Bis(propyl)-cognitin was further found to compete with [(3)H]MK-801 with a K(i) value of 0.27 mum, and the mutation of NR1(N616R) significantly reduced its inhibitory potency. Under glutamate-mediated pathological conditions, bis(propyl)-cognitin, in contrast to bis(heptyl)-cognitin, prevented excitotoxicity with increasing effectiveness against escalating levels of glutamate and much more effectively protected against middle cerebral artery occlusion-induced brain damage than did memantine. More interestingly, under NMDA receptor-mediated physiological conditions, bis(propyl)-cognitin enhanced long-term potentiation in hippocampal slices, whereas MK-801 reduced and memantine did not alter this process. These results suggest that bis(propyl)-cognitin is a UFO antagonist of NMDA receptors with moderate affinity, which may provide a pathologically activated therapy for various neurodegenerative disorders associated with NMDA receptor dysregulation.

  16. Rapid synthesis of propyl caffeate in ionic liquid using a packed bed enzyme microreactor under continuous-flow conditions.

    PubMed

    Wang, Jun; Gu, Shuang-Shuang; Cui, Hong-Sheng; Yang, Liu-Qing; Wu, Xiang-Yang

    2013-12-01

    Propyl caffeate has the highest antioxidant activity among caffeic acid alkyl esters, but its industrial production via enzymatic transesterification in batch reactors is hindered by a long reaction time (24h). To develop a rapid process for the production of propyl caffeate in high yield, a continuous-flow microreactor composed of a two-piece PDMS in a sandwich-like microchannel structure was designed for the transesterification of methyl caffeate and 1-propanol catalyzed by Novozym 435 in [B mim][CF3SO3]. The maximum yield (99.5%) in the microreactor was achieved in a short period of time (2.5h) with a flow rate of 2 μL/min, which kinetic constant Km was 16 times lower than that of a batch reactor. The results indicated that the use of a continuous-flow packed bed enzyme microreactor is an efficient method of producing propyl caffeate with an overall yield of 84.0%. PMID:24128399

  17. Hydroxy propyl cellulose capped silver nanoparticles produced by simple dialysis process

    SciTech Connect

    Francis, L.; Balakrishnan, A.; Marsano, E.

    2010-08-15

    Silver (Ag) nanoparticles ({approx}6 nm) were synthesized using a novel dialysis process. Silver nitrate was used as a starting precursor, ethylene glycol as solvent and hydroxy propyl cellulose (HPC) introduced as a capping agent. Different batches of reaction mixtures were prepared with different concentrations of silver nitrate (AgNO{sub 3}). After the reduction and aging, these solutions were subjected to ultra-violet visible spectroscopy (UVS). Optimized solution, containing 250 mg AgNO{sub 3} revealed strong plasmon resonance peak at {approx}410 nm in the spectrum indicating good colloidal state of Ag nanoparticles in the diluted solution. The optimized solution was subjected to dialysis process to remove any unreacted solvent. UVS of the optimized solution after dialysis showed the plasmon resonance peak shifting to {approx}440 nm indicating the reduction of Ag ions into zero-valent Ag. This solution was dried at 80 {sup o}C and the resultant HPC capped Ag (HPC/Ag) nanoparticles were studied using transmission electron microscopy (TEM) for their particle size and morphology. The particle size distribution (PSD) analysis of these nanoparticles showed skewed distribution plot with particle size ranging from 3 to 18 nm. The nanoparticles were characterized for phase composition using X-ray diffractrometry (XRD) and Fourier transform infrared spectroscopy (FT-IR).

  18. Vibrational spectra and normal coordinate analysis of 2-hydroxy-3-(2-methoxyphenoxy) propyl carbamate

    NASA Astrophysics Data System (ADS)

    Muthu, S.; Renuga, S.

    2014-11-01

    In this work, the vibrational spectral analysis was carried out by using FT-Raman and FTIR spectroscopy in the range 50-4000 cm-1 and 450-4000 cm-1 respectively, for 2-hydroxy-3-(2-methoxyphenoxy) propyl carbamate (2H3MPPLC) molecule. The molecular structure, fundamental vibrational frequencies and intensities of the vibrational bands were interpreted with the aid of structure optimizations and normal coordinate force field calculations based on density functional theory (DFT) and ab initio HF methods with 6-31G(d,p) basis set. The complete vibrational assignments of wave numbers were made on the basis of potential energy distribution (PED). The results of the calculations were applied to simulated spectra of the title compound, which show excellent agreement with observed spectra. The scaled B3LYP/6-31G(d,p) results show the best agreement with the experimental values over the other method. Stability of the molecule arising from hyper conjugative interactions, charge delocalization has been analyzed using natural bond orbital (NBO) analysis. The results confirm the occurrence of intramolecular charge-transfer (ICT) within the molecule. The dipole moment (μ), polarizability (α) and hyperpolarizability (β) of the investigated molecule has been computed using B3LYP/6-31G(d,p) method. Mulliken population analysis on atomic charges was also calculated. Besides, frontier molecular orbitals, molecular electrostatic potential (MEP) and thermodynamic properties were performed.

  19. "Sign-on/off" sensing interface design and fabrication for propyl gallate recognition and sensitive detection.

    PubMed

    Dai, Yunlong; Li, Xueyan; Fan, Limei; Lu, Xiaojing; Kan, Xianwen

    2016-12-15

    A new strategy based on sign-on and sign-off was proposed for propyl gallate (PG) determination by an electrochemical sensor. The successively modified poly(thionine) (PTH) and molecular imprinted polymer (MIP) showed an obvious electrocatalysis and a good recognition toward PG, respectively. Furthermore, the rebound PG molecules in imprinted cavities not only were oxidized but also blocked the electron transmission channels for PTH redox. Thus, a sign-on from PG current and a sign-off from PTH current were combined as a dual-sign for PG detection. Meanwhile, the modified MIP endowed the sensor with recognition capacity. The electrochemical experimental results demonstrated that the prepared sensor possessed good selectivity and high sensitivity. A linear ranging from 5.0×10(-8) to 1.0×10(-4)mol/L for PG detection was obtained with a limit of detection of 2.4×10(-8)mol/L. And the sensor has been applied to analyze PG in real samples with satisfactory results. The simple, low cost, and effective strategy reported here can be further used to prepare electrochemical sensors for other compounds selective recognition and sensitive detection. PMID:27476055

  20. Jumpwise deformation of polymethyl methacrylate in the microplasticity region

    NASA Astrophysics Data System (ADS)

    Shpeizman, V. V.; Yakushev, P. N.; Mukhina, Zh. V.; Kuznetsov, E. V.; Smolyanskii, A. S.

    2013-05-01

    The deformation rate with a step of 325 nm has been measured under uniaxial compression at the initial stage of creep and shape recovery of a polymethyl methacrylate (PMMA) sample after unloading. The effect of low γ-ray doses and magnetic fields on the deformation has been studied. It has been shown that a weak pre-exposure of the PMMA sample structure to radiation and magnetic fields can cause a slight hardening in the microplasticity region. The deformation jump sizes have been determined on micro- and nanoscales. The effect of irradiation and magnetic fields manifests itself as redistributed contributions of various jumps to the deformation.

  1. Mechanism of the photoinduced refractive index increase in polymethyl methacrylate.

    PubMed

    Bowden, M J; Chandross, E A; Kaminow, I P

    1974-01-01

    Polymethyl methacrylate prepared under special circumstances exhibits a substantial increase in refractive index after irradiation with uv light. The essential step in the preparation is peroxidation of the monomer prior to polymerization. This increase in refractive index results from a photoinduced polymerization of unreacted monomer (1-2%) within the film which produces an increase in density (and hence refractive index) in the irradiated region. It is believed that peroxides, both polymeric and monomeric, act as photoinitiators. Sensitivity depends on the concentration of photoinitiator, but the absolute value of Deltan depends on the amount of unreacte monomer.

  2. The immobilization of enzymes onto poly(ethylene)—g.co—methacrylic acid, [poly(ethylene)—g.co—hydroxyethyl methacrylate]—g.co—methacrylic acid and [poly(ethylene)—g.co—methacrylic acid]—g.co—hydroxyethyl methacrylate

    NASA Astrophysics Data System (ADS)

    Da Silva, M. Alves; Gil, M. H.; Guiomar, J.; Lapa, E.; Machado, E.; Moreira, M.; Guthrie, J. T.; Kotov, S.

    A series of graft copolymers has been prepared based on the poly(ethylene) backbone. These carry functional groups which are effective in coupling and provide a level of hydrophilicity which is thought to be consistent with generating a suitable micro-environment for enzyme immobilization and subsequent enhanced biocatalyst stability. Four enzymes have been immobilized. These are papain, trypsin, glucose oxidase and α-chymotrypsin. The parent copolymers were assembled via radiation-induced grafting. Secondary grafting was achieved in two ways. The first involved grafting methacrylic acid onto poly(ethylene)—g.co—hydroxyethyl methacrylate, while the second involved grafting hydroxyethyl methacrylate onto poly(ethylene)—g.co—methacrylic acid. The results suggest that a high degree of specificity arises in the systems examined with regard to the enzymes, the type of copolymers and the coupling procedures. Generally, relatively large amounts of enzyme become covalently attached to the copolymers, though the overall level of activity is low. In this work it has been observed that the most satisfactory results were obtained when the partly hydrolyzed poly(ethylene)—g.co—hydroxyethyl methacrylate was used in the immobilization of the biocatalysts.

  3. Preparation of novel poly(hydroxyethyl methacrylate-co-glycidyl methacrylate)-grafted core-shell magnetic chitosan microspheres and immobilization of lactase.

    PubMed

    Zhao, Wei; Yang, Rui-Jin; Qian, Ting-Ting; Hua, Xiao; Zhang, Wen-Bin; Katiyo, Wendy

    2013-06-06

    Poly(hydroxyethyl methacrylate-co-glycidyl methacrylate)-grafted magnetic chitosan microspheres (HG-MCM) were prepared using reversed-phase suspension polymerization method. The HG-MCM presented a core-shell structure and regular spherical shape with poly(hydroxyethyl methacrylate-co-glycidyl methacrylate) grafted onto the chitosan layer coating the Fe3O4 cores. The average diameter of the magnetic microspheres was 10.67 μm, within a narrow size distribution of 6.6-17.4 μm. The saturation magnetization and retentivity of the magnetic microspheres were 7.0033 emu/g and 0.6273 emu/g, respectively. The application of HG-MCM in immobilization of lactase showed that the immobilized enzyme presented higher storage, pH and thermal stability compared to the free enzyme. This indicates that HG-MCM have potential applications in bio-macromolecule immobilization.

  4. 40 CFR 721.10450 - Oxirane, 2-[[3-(trimethoxysilyl)propoxy]methyl]-, reaction products with wollastonite (Ca(SiO3)).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Oxirane, 2- methyl]-, reaction... Significant New Uses for Specific Chemical Substances § 721.10450 Oxirane, 2- methyl]-, reaction products with... substance identified as oxirane, 2- methyl]-, reaction products with wollastonite (Ca(SiO3)) (PMN...

  5. 40 CFR 721.10450 - Oxirane, 2-[[3-(trimethoxysilyl)propoxy]methyl]-, reaction products with wollastonite (Ca(SiO3)).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Oxirane, 2- methyl]-, reaction... Significant New Uses for Specific Chemical Substances § 721.10450 Oxirane, 2- methyl]-, reaction products with... substance identified as oxirane, 2- methyl]-, reaction products with wollastonite (Ca(SiO3)) (PMN...

  6. Silane to enhance the bond between polymethyl methacrylate and titanium.

    PubMed

    May, K B; Fox, J; Razzoog, M E; Lang, B R

    1995-05-01

    The machined surface of wrought titanium frameworks used in implant-supported, fixed prostheses does not bond well with acrylic resin. Surface pretreatment has been suggested to enhance the retention of polymethyl methacrylate to machined titanium surfaces. This study evaluated a new bonding material (Rocatec) to determine its effect on the bond strength between titanium and polymethyl methacrylate. Twenty rod-shaped specimens of grade 2 titanium (7.6 x 0.3 cm in diameter) were divided into two groups of 10 samples. Group A received no pretreatment and group B was pretreated with 110 microns alumina air abrasive and the Rocatec material. Heat-cured denture base resin was processed around each titanium sample in a cylindrical shape approximately 0.9 x 1.5 cm. A Shell-Nielsen shear test was performed with a universal testing machine at a crosshead speed of 0.5 mm/minute to determine the bond strength in megapascals (MPa). Group B specimens (23.8 +/- 1.78 MPa) had a shear strength 68% greater than group A (16.1 +/- 1.61 MPa) (p 0.0001). The results of this study indicated that surface pretreatment of grade 2 titanium with 110 microns alumina air abrasive plus Rocatec bonding material significantly enhances the shear bond strength to PMMA.

  7. Synthesis of Methyl Methacrylate from Coal-Derived Syngas

    SciTech Connect

    Gerald N. Choi; James J. Spivey; Jospeh R. Zoeller; Makarand R. Gogate; Richard D. Colberg; Samuel S. Tam

    1998-04-17

    Research Triangle Institute (RTI), Eastman Chemical Company, and Bechtel collectively are developing a novel three-step process for the synthesis of methyl methacrylate (MMA) from coal-derived syngas that consists of the steps of synthesis of a propionate, its condensation with formaldehyde to form methacrylic acid (MAA), and esterification of MAA with methanol to produce MMA. RTI has completed the research on the three-step methanol-based route to MMA. Under an extension to the original contract, RTI is currently evaluating a new DME-based process for MMA. The key research need for DME route is to develop catalysts for DME partial oxidation reactions and DME condensation reactions. Over the last month, RTI has finalized the design of a fixed-bed microreactor system for DME partial oxidation reactions. RTI incorporated some design changes to the feed blending system, so as to be able to blend varying proportions of DME and oxygen. RTI has also examined the flammability limits of DME-air mixtures. Since the lower flammability limit of DME in air is 3.6 volume percent, RTI will use a nominal feed composition of 1.6 percent in air, which is less than half the lower explosion limit for DME-air mixtures. This nominal feed composition is thus considered operationally safe, for DME partial oxidation reactions. RTI is also currently developing an analytical system for DME partial oxidation reaction system.

  8. Novel syngas-based process for methyl methacrylate

    SciTech Connect

    Gogate, M.R.; Spivey, J.J.; Zoeller, J.R.; Choi, G.N.; Tam, S.S.; Tischer, R.E.; Srivastava, R.D.

    1996-12-31

    Research Triangle Institute (RTI), Eastman Chemical Company, and Bechtel are developing a novel process for synthesis of methyl methacrylate (MMA) from coal-derived syngas, under a contract from the U.S. Department of Energy, Pittsburgh Energy Technology Center. This three-step process consists of synthesis of a propionate, its condensation with formaldehyde, and esterification of resulting methacrylic acid (MAA) with methanol to produce MMA. Eastman has focused on the research on propionate synthesis step. The resultant Mo catalysts work efficiently at much less severe conditions (170{degrees}C and 30 atm) than the conventional Ni catalysts (270{degrees}C and 180 atm). Bechtel has performed an extensive cost analysis, which shows that Eastman`s propionate synthesis process is competitive with other technologies to produce the anhydride. In the second step, RTI and Eastman have developed active and stable V-SI-P and Ta metal oxide catalysts for condensation reactions of propionates with formaldehyde. RTI has demonstrated a novel correlation among the catalyst acid-base properties, condensation reaction yield, and long-term catalyst activity. Current research focuses on enhancing the condensation reaction yields, acid-base properties, in situ condensation in a high- temperature, high-pressure (HTHP) slurry reactor, and alternate formaldehyde feedstocks. Based on Eastman and RTI laboratory reactor operating data, a cost estimate is also being developed for the integrated process.

  9. Superhydrophobic terpolymer nanofibers containing perfluoroethyl alkyl methacrylate by electrospinning

    NASA Astrophysics Data System (ADS)

    Cengiz, Ugur; Avci, Merih Z.; Erbil, H. Yildirim; Sarac, A. Sezai

    2012-05-01

    A new statistical terpolymer containing perfluoroethyl alkyl methacrylate (Zonyl-TM), methyl methacrylate and butyl acrylate, poly(Zonyl-TM-ran-MMA-ran-BA) was synthesized in supercritical carbon dioxide at 200 bar and 80 °C using AIBN as an initiator by heterogeneous free radical copolymerization. Nanofibers of this terpolymer were produced by electrospinning from its DMF solution. The structural and thermal properties of terpolymers and electrospun poly(Zonyl-TM-MMA-BA) nanofibers were analyzed using Fourier transform infrared spectroscopy, nuclear magnetic resonance spectroscopy and differential scanning calorimetry. Nanofiber morphology was investigated by scanning electron microscopy. Electrospun nanofiber layer was found to be superhydrophobic with a water contact angle of 172 ± 1° and highly oleophobic with hexadecane, glycerol and ethylene glycol contact angles of 70 ± 1°, 167 ± 1° and 163 ± 1° respectively. The change of the contact angle results on the electrospun fiber layer and flat terpolymer surfaces by varying feed monomer composition were compared and discussed in the text.

  10. 40 CFR 721.6920 - Butyl acrylate, polymer with substituted methyl styrene, methyl methacrylate, and substituted...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Butyl acrylate, polymer with... acrylate, polymer with substituted methyl styrene, methyl methacrylate, and substituted silane. (a... butyl acrylate, polymer with substituted methyl styrene, methyl methacrylate, and substituted...

  11. 40 CFR 721.6920 - Butyl acrylate, polymer with substituted methyl styrene, methyl methacrylate, and substituted...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Butyl acrylate, polymer with... acrylate, polymer with substituted methyl styrene, methyl methacrylate, and substituted silane. (a... butyl acrylate, polymer with substituted methyl styrene, methyl methacrylate, and substituted...

  12. 21 CFR 177.2000 - Vinylidene chloride/methyl acrylate/methyl methacrylate polymers.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... methacrylate polymers. 177.2000 Section 177.2000 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF...: POLYMERS Substances for Use as Basic Components of Single and Repeated Use Food Contact Surfaces § 177.2000 Vinylidene chloride/methyl acrylate/methyl methacrylate polymers. The vinylidene chloride/methyl...

  13. 40 CFR 721.6920 - Butyl acrylate, polymer with substituted methyl styrene, methyl methacrylate, and substituted...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Butyl acrylate, polymer with... acrylate, polymer with substituted methyl styrene, methyl methacrylate, and substituted silane. (a... butyl acrylate, polymer with substituted methyl styrene, methyl methacrylate, and substituted...

  14. 21 CFR 177.2000 - Vinylidene chloride/methyl acrylate/methyl methacrylate polymers.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... methacrylate polymers. 177.2000 Section 177.2000 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF...: POLYMERS Substances for Use as Basic Components of Single and Repeated Use Food Contact Surfaces § 177.2000 Vinylidene chloride/methyl acrylate/methyl methacrylate polymers. The vinylidene chloride/methyl...

  15. 40 CFR 721.6920 - Butyl acrylate, polymer with substituted methyl styrene, methyl methacrylate, and substituted...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Butyl acrylate, polymer with... acrylate, polymer with substituted methyl styrene, methyl methacrylate, and substituted silane. (a... butyl acrylate, polymer with substituted methyl styrene, methyl methacrylate, and substituted...

  16. 21 CFR 177.2000 - Vinylidene chloride/methyl acrylate/methyl methacrylate polymers.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... methacrylate polymers. 177.2000 Section 177.2000 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF...: POLYMERS Substances for Use as Basic Components of Single and Repeated Use Food Contact Surfaces § 177.2000 Vinylidene chloride/methyl acrylate/methyl methacrylate polymers. The vinylidene chloride/methyl...

  17. 40 CFR 721.6920 - Butyl acrylate, polymer with substituted methyl styrene, methyl methacrylate, and substituted...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Butyl acrylate, polymer with... acrylate, polymer with substituted methyl styrene, methyl methacrylate, and substituted silane. (a... butyl acrylate, polymer with substituted methyl styrene, methyl methacrylate, and substituted...

  18. 21 CFR 177.2000 - Vinylidene chloride/methyl acrylate/methyl methacrylate polymers.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... methacrylate polymers. 177.2000 Section 177.2000 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF...: POLYMERS Substances for Use as Basic Components of Single and Repeated Use Food Contact Surfaces § 177.2000 Vinylidene chloride/methyl acrylate/methyl methacrylate polymers. The vinylidene chloride/methyl...

  19. The acute aquatic toxicity of a series of acrylate and methacrylate esters

    SciTech Connect

    Staples, C.A.; McLaughlin, J.E.; Hamilton, J.D.

    1994-12-31

    Acute aquatic toxicity data for several acrylate and methacrylate esters were reviewed. Acrylates included acrylic acid, ethyl-, and butyl-acrylate. Methacrylates included methacrylic acid, methyl-, and butyl-methacrylate. Tests were 48 hr or 96 hr standard flow through (invertebrates and fish) assays (measured exposure concentrations). These data are currently used in a risk assessment of acrylate/methacrylate environmental safety. Algal growth (Selanastrum capricomutum) 96 hr EC{sub 50}s were 0.17 mg/L (NOEC < 0.13 mg/L) for acrylic acid, 11.0 mg/L (NOEC < 6.5 mg/L) for ethyl acrylate, and 5.2 mg/L (NOEC < 3.8 mg/L) for butyl acrylate. Invertebrate (Daphnia magna) 48 hr LC{sub 50}s were 95.0 mg/L (NOEC 23.0 mg/L) for acrylic acid, 7.9 mg/L (NOEC 3.4 mg/L) for ethyl acrylate, and 8.2 mg/L (NOEC 2.4 mg/L) for butyl acrylate. Rainbow trout (Oncorhynchus mykiss) 96 hr LC{sub 50}s were 27.0 mg/L (NOEC 6.3 mg/L) for acrylic acid, 4.6 mg/L (NOEC 0.78 mg/L) for ethyl acrylate, and 5.2 mg/L (NOEC 3.8 mg/L) for butyl acrylate. Algae 96 hr EC{sub 50}s were 0.59 mg/L (NOEC 0.38 mg/L) for methacrylic acid, 170.0 mg/L (NOEC 100.0 mg/L) for methyl methacrylate, and 130.0 mg/L for butyl methacrylate. Daphnia magna 48 hr LC{sub 50}s were > 130.0 mg/L (NOEC 130.0 mg/L) for methacrylic acid, 69.0 mg/L (NOEC 48.0 mg/L) for methyl methacrylate, and 32.0 mg/L (NOEC 23.0 mg/L) for butyl methacrylate. Trout 96 hr LC{sub 50}s were 85.0 mg/L (NOEC 12.0 mg/L) for methacrylic acid and > 79.0 mg/L (NOEC 40.0 mg/L) for methyl methacrylate. The fathead minnow (Pimephales promelas) 96 hr LC{sub 50} was 11.0 mg/L for butyl methacrylate.

  20. Investigation of infrared calibration methods for application to the study of methyl methacrylate polymerization.

    PubMed

    Kaczmarczyk, B; Morejko-Buz, B; Stolarzewicz, A

    2001-08-01

    Infrared spectroscopy has been used to monitor the polymerization of methyl methacrylate. Concentrations of methyl methacrylate in the reaction mixture were determined by use of three calibration methods. Classical quantitative analysis was used to measure the height of the stretching vibration bands of the vinyl group at 1639 cm(-1). A calibration procedure using the considerably higher intensity of the C = O stretching vibration band of the carbonyl ester group at 1725 cm(-1) seemed useful only for high concentrations of methyl methacrylate, i.e. at the beginning of reaction, because this band overlaps that of poly(methyl methacrylate). Use of second-derivative spectra and measuring their values at 1725 cm(-1) enabled estimation of ten times lower concentrations of methyl methacrylate the calibration using the band from the vinyl group. PMID:11569872

  1. Disruption of DNA Damage-Response by Propyl Gallate and 9-Aminoacridine.

    PubMed

    Matsuda, Shun; Matsuda, Yoko; Yanagisawa, Shin-Ya; Ikura, Masae; Ikura, Tsuyoshi; Matsuda, Tomonari

    2016-06-01

    The DNA-damage response (DDR) protects the genome from various types of endogenous and exogenous DNA damage, and can itself be a target of certain chemicals that give rise to chromosomal aberrations. Here, we developed a screening method to detect inhibition of Mediator of DNA damage Checkpoint 1 (MDC1) foci formation (the Enhanced Green Fluorescent Protein (EGFP)-MDC1 foci formation-inhibition assay) using EGFP-MDC1-expressing human cells. The assay identified propyl gallate (PG) and 9-aminoacridine (9-AA) as inhibitors of camptothecin (CPT)-induced MDC1 foci formation. We demonstrated that the inhibition of CPT-induced MDC1 foci formation by PG was caused by the direct suppression of histone H2AX phosphorylation at Ser139 (γH2AX), which is required for MDC1 foci formation, by quantifying γH2AX in cells and in vitro 9-AA also directly suppressed H2AX Ser139-phosphorylation in vitro but the concentration was much higher than that required to suppress CPT-induced MDC1 foci formation in cells. Consistent with these findings, PG and 9-AA both suppressed CPT-induced G2/M cell-cycle arrest and increased the number of abnormal nuclei. Our results suggest that early DDR-inhibitory effects of PG and 9-AA contribute to their chromosome-damaging potential, and that the EGFP-MDC1 foci formation-inhibition assay is useful for detection of and screening for H2AX Ser139-phosphorylation-inhibitory effects of chemicals.

  2. Protection against radiation-induced damage of 6-propyl-2-thiouracil (PTU) in thyroid cells.

    PubMed

    Perona, Marina; Dagrosa, María A; Pagotto, Romina; Casal, Mariana; Pignataro, Omar P; Pisarev, Mario A; Juvenal, Guillermo J

    2013-03-01

    Many epidemiologic studies have shown that the exposure to high external radiation doses increases thyroid neoplastic frequency, especially when given during childhood or adolescence. The use of radioprotective drugs may decrease the damage caused by radiation therapy and therefore could be useful to prevent the development of thyroid tumors. The aim of this study was to investigate the possible application of 6-propyl-2-thiouracil (PTU) as a radioprotector in the thyroid gland. Rat thyroid epithelial cells (FRTL-5) were exposed to different doses of γ irradiation with or without the addition of PTU, methimazole (MMI), reduced glutathione (GSH) and perchlorate (KClO4). Radiation response was analyzed by clonogenic survival assay. Cyclic AMP (cAMP) levels were measured by radioimmunoassay (RIA). Apoptosis was quantified by nuclear cell morphology and caspase 3 activity assays. Intracellular reactive oxygen species (ROS) levels were measured using the fluorescent dye 2',7'-dichlorofluorescein-diacetate. Catalase, superoxide dismutase and glutathione peroxidase activities were also determined. Pretreatment with PTU, MMI and GSH prior to irradiation significantly increased the surviving cell fraction (SF) at 2 Gy (P < 0.05), while no effect was observed with KClO4. An increase in extracellular levels of cAMP was found only in PTU treated cells in a dose and time-dependent manner. Cells incubated with agents that stimulate cAMP (forskolin and dibutyril cAMP) mimicked the effect of PTU on SF. Moreover, pretreatment with the inhibitor of protein kinase A, H-89, abolished the radioprotective effect of PTU. PTU treatment diminished radiation-induced apoptosis and protected cells against radiation-induced ROS elevation and suppression of the antioxidant enzyme's activity. PTU was found to radioprotect normal thyroid cells through cAMP elevation and reduction in both apoptosis and radiation-induced oxidative stress damage.

  3. Viability of hydroxyethyl methacrylate-methyl methacrylate-microencapsulated PC12 cells after omental pouch implantation within agarose gels.

    PubMed

    Fleming, A J; Sefton, M V

    2003-10-01

    Hydroxyethyl methacrylate-methyl methacrylate (HEMA-MMA, 75 mol% HEMA). Microcapsules containing viable PC12 cells (as an allogeneic transplant model) were implanted into omental pouches in Wistar rats. Two different capsule preparations were tested, based on differences in polymer solutions during extrusion: 10% HEMA-MMA in TEG, and 9% HEMA-MMA in TEG with 30% poly(vinyl pyrrolidone) (PVP). The omental pouch proved to be an ideal transplant site in terms of implantation, recovery, and blood vessel proximity (nutrient supply). To minimize the fibrous overgrowth and damaged capsules previously seen on implantation of individual capsules, agarose gels were used to embed the capsules before implantation. Cells proliferated within the microcapsule-agarose device during the first 7 days of implantation, but overall cell viability declined over the 3-week period, when compared with similar capsules maintained in vitro. Nonetheless, approximately 50% of the initial encapsulated cells were still viable after 3 weeks in vivo. This approach to HEMA-MMA microcapsule implantation improved cell viability and capsule integrity after 3 weeks in vivo, compared with capsules implanted without agarose.

  4. Acrylic resins: methacrylate polymers. 1964-April, 1981 (citations from the NTIS data base). Report for 1964-April 1981

    SciTech Connect

    Not Available

    1981-05-01

    Polymethyl methacrylate, polymethacrylic acid, and other methacrylate and methacrylic polymers, copolymers, and resins are covered in this bibliography. The citations include references concerning physical and chemical properties, synthesis, polymerization, and processing. (This updated bibliography contains 278 citations, 40 of which are new entries to the previous edition.)

  5. SYNTHESIS OF METHYL METHACRYLATE FROM COAL-DERIVED SYNGAS

    SciTech Connect

    BEN W.-L. JANG; GERALD N. CHOI; JAMES J. SPIVEY; JOSPEH R. ZOELLER; RICHARD D. COLBERG.

    1999-01-20

    Research Triangle Institute (RTI), Eastman Chemical Company, and Bechtel collectively are developing a novel three-step process for the synthesis of methyl methacrylate (MMA) from coal-derived syngas that consists of the steps of synthesis of a propionate, its condensation with formaldehyde to form methacrylic acid (MAA), and esterification of MAA with methanol to produce MMA. The research team has completed the research on the three-step methanol-based route to MMA. Under an extension to the original contract, we are currently evaluating a new DME-based process for MMA. The key research need for DME route is to develop catalysts for DME partial oxidation reactions and DME condensation reactions. Over the last quarter(Oct.-Dec./98), we have investigated the condensation between methyl propionate and formaldehyde (MP/HCHO=4.5/1) at various reaction temperatures(280-360EC) over 5%, 10%, and 20% Nb O /SiO catalysts. The conversion of HCHO increases with reaction 2 5 2 temperature and niobium loading. MMA+MAA selectivity goes through a maximum with the temperature over both 10% and 20% Nb O /SiO . The selectivities to MMA+MAA are 67.2%, 2 5 2 72.3%and 58.1% at 320EC over 5%, 10%, 20% Nb O /SiO , respectively. However, the 2 5 2 conversion of formaldehyde decreases rapidly with time on stream. The results suggest that silica supported niobium catalysts are active and selective for condensation of MP with HCHO, but deactivation needs to be minimized for the consideration of commercial application. We have preliminarily investigated the partial oxidation of dimethyl ether(DME) over 5% Nb O /SiO catalyst. Reactant gas mixture of 0.1% DME, 0.1% O and balance nitrogen is 2 5 2 2 studied with temperature ranging from 200C to 500C. The conversion of DME first increases with temperature reaching an maximum at 400C then decreases. The selectivity to HCHO also increases with reaction temperature first. But the selectivity to HCHO decreases at temperature above 350C accompanied by

  6. SYNTHESIS OF METHYL METHACRYLATE FROM COAL-DERIVED SYNGAS

    SciTech Connect

    BEN W.-L. JANG; GERALD N. CHOI; JAMES J. SPIVEY; JOSPEH R. ZOELLER; RICHARD D. COLBERG

    1999-01-20

    Research Triangle Institute (RTI), Eastman Chemical Company, and Bechtel collectively are developing a novel three-step process for the synthesis of methyl methacrylate (MMA) from coal-derived syngas that consists of the steps of synthesis of a propionate, its condensation with formaldehyde to form methacrylic acid (MAA), and esterification of MAA with methanol to produce MMA. The research team has completed the research on the three-step methanol-based route to MMA. Under an extension to the original contract, we are currently evaluating a new DME-based process for MMA. The key research need for DME route is to develop catalysts for DME partial oxidation reactions and DME condensation reactions. Over the last quarter(Oct.-Dec./98), we have investigated the condensation between methyl propionate and formaldehyde (MP/HCHO=4.5/1) at various reaction temperatures(280-360EC) over 5%, 10%, and 20% Nb O /SiO catalysts. The conversion of HCHO increases with reaction 2 5 2 temperature and niobium loading. MMA+MAA selectivity goes through a maximum with the temperature over both 10% and 20% Nb O /SiO . The selectivities to MMA+MAA are 67.2%, 2 5 2 72.3%and 58.1% at 320EC over 5%, 10%, 20% Nb O /SiO , respectively. However, the 2 5 2 conversion of formaldehyde decreases rapidly with time on stream. The results suggest that silica supported niobium catalysts are active and selective for condensation of MP with HCHO, but deactivation needs to be minimized for the consideration of commercial application. We have preliminarily investigated the partial oxidation of dimethyl ether(DME) over 5% Nb O /SiO catalyst. Reactant gas mixture of 0.1% DME, 0.1% O and balance nitrogen is 2 5 2 2 studied with temperature ranging from 200°C to 500°C. The conversion of DME first increases with temperature reaching an maximum at 400°C then decreases. The selectivity to HCHO also increases with reaction temperature first. But the selectivity to HCHO decreases at temperature above 350

  7. Propyl gallate synthesis using acidophilic tannase and simultaneous production of tannase and gallic acid by marine Aspergillus awamori BTMFW032.

    PubMed

    Beena, P S; Basheer, Soorej M; Bhat, Sarita G; Bahkali, Ali H; Chandrasekaran, M

    2011-07-01

    Marine Aspergillus awamori BTMFW032, recently reported by us, produce acidophilic tannase as extracellular enzyme. Here, we report the application of this enzyme for synthesis of propyl gallate by direct transesterification of tannic acid and in tea cream solubilisation besides the simultaneous production of gallic acid along with tannase under submerged fermentation by this fungus. This acidophilic tannase enabled synthesis of propyl gallate by direct transesterification of tannic acid using propanol as organic reaction media under low water conditions. The identity of the product was confirmed with thin layer chromatography and Fourier transform infrared spectroscopy. It was noted that 699 U/ml of enzyme could give 60% solubilisation of tea cream within 1 h. Enzyme production medium was optimized adopting Box-Behnken design for simultaneous synthesis of tannase and gallic acid. Process variables including tannic acid, sodium chloride, ferrous sulphate, dipotassium hydrogen phosphate, incubation period and agitation were recognized as the critical factors that influenced tannase and gallic acid production. The model obtained predicted 4,824.61 U/ml of tannase and 136.206 μg/ml gallic acid after 48 h of incubation, whereas optimized medium supported 5,085 U/ml tannase and 372.6 μg/ml of gallic acid production after 36 and 84 h of incubation, respectively, with a 15-fold increase in both enzyme and gallic acid production. Results indicated scope for utilization of this acidophilic tannase for transesterification of tannic acid into propyl gallate, tea cream solubilisation and simultaneous production of gallic acid along with tannase.

  8. Deterioration of polymethyl methacrylate dentures in the oral cavity.

    PubMed

    Matsuo, Hiroshi; Suenaga, Hanako; Takahashi, Masatoshi; Suzuki, Osamu; Sasaki, Keiichi; Takahashi, Nobuhiro

    2015-01-01

    Polymethyl methacrylate (PMMA)-made prostheses used in the oral cavity were evaluated by multimodal assessment in order to elucidate the biodeterioration of PMMA. In used dentures (UD), the micro-Vickers hardness of the polished denture surface and denture basal surface was lower than that of the torn surface (p<0.05), whereas the shaved surface approximately 100 µm from the polished surface showed a similar value to the torn surface. By contrast, there were no differences among these surfaces in new resin (NR). The volatile content of UD was higher than that of NR (p<0.05). Component analysis by ATR-FTIR showed specific spectra (1,700-1,400 cm(-1)) only in UD. This study revealed that PMMA deteriorated during long-term use in the oral cavity in terms of hardness and volatile content with component alteration, and suggests the involvement of biodeterioration, possibly due to saliva and oral microbiota.

  9. Chest wall reconstruction with methacrylate prosthesis in Poland syndrome.

    PubMed

    Arango Tomás, Elisabet; Baamonde Laborda, Carlos; Algar Algar, Javier; Salvatierra Velázquez, Angel

    2013-10-01

    Poland syndrome is a rare congenital malformation. This syndrome was described in 1841 by Alfred Poland at Guy's Hospital in London. It is characterized by hypoplasia of the breast and nipple, subcutaneous tissue shortages, lack of the costosternal portion of the pectoralis major muscle and associated alterations of the fingers on the same side. Corrective treatment of the chest and soft tissue abnormalities in Poland syndrome varies according to different authors. We report the case of a 17-year-old adolescent who underwent chest wall reconstruction with a methyl methacrylate prosthesis. This surgical procedure is recommended for large anterior chest wall defects, and it prevents paradoxical movement. Moreover it provides for individual remodeling of the defect depending on the shape of the patient's chest. PMID:23453291

  10. Radiation synthesis of nanosilver nanohydrogels of poly(methacrylic acid)

    NASA Astrophysics Data System (ADS)

    Gupta, Bhuvanesh; Gautam, Deepti; Anjum, Sadiya; Saxena, Shalini; Kapil, Arti

    2013-11-01

    Nanosilver nanohydrogels (nSnH) of poly(methacrylic acid) were synthesized and stabilized using gamma irradiation. The main objective of this study was to develop silver nanoparticles and to evaluate the antimicrobial activity. Radiation helps in the polymerization, crosslinking and reduction of silver nitrate as well. Highly stable and uniformly distributed silver nanoparticles have been obtained within hydrogel network by water in oil nanoemulsion polymerization and were evaluated by dynamic light scattering (DLS) and transmission electron microscopy (TEM) respectively. TEM showed almost spherical and uniform distribution of silver nanoparticles through the hydrogel network. The mean size of silver nanoparticles ranging is 10-50 nm. The nanohydrogels showed good swelling in water. Antibacterial studies of nSnH suggest that it can be a good candidate as coating material in biomedical applications.

  11. Fabrication of electrospun poly (methyl methacrylate) nanofiber membranes

    NASA Astrophysics Data System (ADS)

    Sethupathy, M.; Sethuraman, V.; Manisankar, P.

    2013-02-01

    Electrospun nanofiber of poly(methyl methacrylate) (PMMA) was fabricated with different concentrations of polymer solution and the optimum concentration arrived at was 15 wt %. The surface morphology of the electrospun membrane was observed by scanning electron microscopy. It consist of thin fibers with an average diameter of about 200-450 nm. The images revealed that the nanofibers showed uniform diameter and no bead formation was observed. Impedance measurements were done for the membranes. PMMA nanofiber membrane showed an ionic conductivity of 1.53 × 10-3 Scm-1 at room temperature. FTIR results confirmed that there was no chemical change in the polymer. The results suggested that electrolyte uptake, ionic conduction and thermal behavior were improved for the PMMA electrospun nanofiber. Hence these nanofibres can very well be employed for the construction of dye-sensitized solar cells and Lithium batteries.

  12. Interaction between N-vinylpyrrolidone and methyl methacrylate

    NASA Astrophysics Data System (ADS)

    Zaitseva, V. V.; Shtonda, A. V.; Tyurina, T. G.; Bagdasarova, A. R.; Zaitsev, S. Yu.

    2014-04-01

    It is established that the interaction of the isomers of N-vinylpyrrolidone (NVP) and methyl methacrylate (MMA) leads to the formation of molecular π-H- and H-complexes with energies within the limits of 10.2-13.6 (AM1) or 18.2-24.0 (B3LYP/6-311++G( d)) kJ/mol. The structures of complex-bound molecules are examined with respect to changes in the charges on terminal -C1=C2- groups, the distance between them and atoms in an H-bond, and the presence of combined overlapping molecular orbitals (MOs). The presence of an averaged complex that includes presumably all possible structures and allows us to perform the copolymerization of specified monomers in the absence of an initiator is confirmed by means of UV and NMR spectroscopy.

  13. Chest wall reconstruction with methacrylate prosthesis in Poland syndrome.

    PubMed

    Arango Tomás, Elisabet; Baamonde Laborda, Carlos; Algar Algar, Javier; Salvatierra Velázquez, Angel

    2013-10-01

    Poland syndrome is a rare congenital malformation. This syndrome was described in 1841 by Alfred Poland at Guy's Hospital in London. It is characterized by hypoplasia of the breast and nipple, subcutaneous tissue shortages, lack of the costosternal portion of the pectoralis major muscle and associated alterations of the fingers on the same side. Corrective treatment of the chest and soft tissue abnormalities in Poland syndrome varies according to different authors. We report the case of a 17-year-old adolescent who underwent chest wall reconstruction with a methyl methacrylate prosthesis. This surgical procedure is recommended for large anterior chest wall defects, and it prevents paradoxical movement. Moreover it provides for individual remodeling of the defect depending on the shape of the patient's chest.

  14. Laser processing of poly(methyl methacrylate) Lambertian diffusers

    NASA Astrophysics Data System (ADS)

    Bubb, Daniel M.; Yi, Sunyong; Kuchmek, John; Corgan, Jeffrey; Papantonakis, Michael

    2010-10-01

    Matrix-assisted pulsed laser deposition was used to deposit poly(methyl methacrylate) on silicon wafers and sodium silicate glass slides for the purpose of making optical diffusers. After deposition, the reflectance of the coated substrates was measured as a function of scattering angle. We found that the angular dependence of the reflectance could be described as the sum of two functions. First, a Gaussian describes the specular reflection of the underlying substrate that has been broadened by passage through the film. Second, a cosine function describes the reflectance contribution from the film itself. We found that by increasing the thickness of the deposited film that we could eliminate the specular reflection to obtain Lambertian diffusers. Since we can control the surface roughness by adjusting the ratio of the two matrices in laser processing, this deposition technique offers the possibility of producing a wide range of diffusers of different types.

  15. Accuracy of adaptation of thermoformed poly(methyl methacrylate).

    PubMed

    Jagger, R G; Milward, P J; Jagger, D C; Vowles, R W

    2003-04-01

    Thermoformed poly(methyl methacrylate) (PMMA) sheet is used to produce a number of different dental appliances such as stents, occlusal splints and baseplates for occlusal rims. The purpose of the present study was to measure the accuracy of adaptation of Perspex PMMA sheet and to determine the effect of annealing on the accuracy of the thermoformed specimens. The results of the study showed that PMMA can produce specimens that are accurately adapted to the cast. Immersion in water resulted in an increase in the space between the cast and the specimen for both thermoformed and thermoformed and annealed acrylic resin. Annealing of the thermoformed specimens had significantly less increase in space between the cast and the specimens when immersed in water over a period of 3 months.

  16. Synthesis of acrylates and Methacrylates from Coal-Derived Syngas

    SciTech Connect

    1997-05-12

    Research Triangle Institute (RTI), Eastman Chemical Company, and Bechtel collectively are developing a novel process for the synthesis of methyl methacrylate (MMA) from coal-derived syngas, under a contract from the U.S. Department of Energy, Federal Energy Technology Center. This three-step process consists of synthesis of a propionate, its condensation with formaldehyde, and esterification of resulting methacrylic acid (MAA) with methanol to produce MMA. Eastman has focused on the propionate synthesis step. The resultant Mo catalysts work efficiently at much less severe conditions (170{degrees}C and 30 atm) than the conventional Ni catalysts (270{degrees} C and 180 atm). Bechtel has performed an extensive cost analysis which shows that Eastman`s propionate synthesis step is competitive with other technologies to produce the anhydride. Eastman and Bechtel have also compared the RTI- Eastman-Bechtel three-step methanol route to five other process routes to MMA. The results show that the product MMA can be produced at 520/lb, for a 250 Mlb/year MMA plant, and this product cost is competitive to all other process routes to MMA, except propyne carbonylation. In the second step, RTI and Eastman have developed active and stable V-SI-P tertiary metal oxide catalysts, Nb/Si0{sub 2}, and Ta/Si0{sub 2} catalysts for condensation of propionic anhydride or propionic acid with formaldehyde. RTI has demonstrated a novel correlation among the catalyst acid-base properties, condensation reaction yield, and long-term catalyst performance. Eastman and Bechtel have used the RTI experimental results of a 20 percent Nb/Si0{sub 2} catalyst, in terms of reactant conversions, MAA selectivities, and MAA yield, for their economic analysis. Recent research focuses on enhancing the condensation reaction yields, a better understanding of the acid-base property correlation and enhancing the catalyst lifetime.

  17. Synthesis of Methyl Methacrylate From Coal-Derived Syngas

    SciTech Connect

    Ben W.-L. Jang; Gerald N. Choi; James J. Spivey; Jospeh R. Zoeller; Richard D. Colberg; Samuel S. Tam

    1998-07-27

    Research Triangle Institute (RTI), Eastman Chemical Company, and Bechtel collectively are developing a novel three-step process for the synthesis of methyl methacrylate (MMA) from coal-derived syngas that consists of the steps of synthesis of a propionate, its condensation with formaldehyde to form methacrylic acid (MAA), and esterification of MAA with methanol to produce MMA. RTI has completed the research on the three-step methanol-based route to MMA. Under an extension to the original contract, RTI is currently evaluating a new DME-based process for MMA. The key research need for DME route is to develop catalysts for DME partial oxidation reactions and DME condensation reactions. Over the last quarter(April-June, 1998), RTI has modified the reactor system including a new preheater and new temperature settings for the preheater. Continuous condensation of formaldehyde with propionic acid were carried out over 10% Nb O /SiO at 300°C without 2 5 2 interruption. Five activity and four regeneration cycles have been completed without plugging or material balance problems. The results show that 10% Nb O /SiO deactivates slowly with time 2 5 2 but can be regenerated, at least four times, to 100% of its original activity with 2% O in nitrogen 2 at 400°C. The cycles continue with consistent 90-95% of carbon balance. The reaction is scheduled to complete with 6 activity cycles and 5 regenerations. Used catalysts will be analyzed with TGA and XPS to determine bulk and surface coke content and coke properties. RTI will start the investigation of effects of propionic acid/formaldehyde ratio on reaction activity and product selectivity over 20% Nb O /SiO catalysts.

  18. Macrophage response to methacrylate conversion using a gradient approach.

    PubMed

    Lin, Nancy J; Bailey, LeeAnn O; Becker, Matthew L; Washburn, Newell R; Henderson, Lori A

    2007-03-01

    Incomplete conversion, an ongoing challenge facing photopolymerized methacrylate-based polymers, affects leachables as well as the resulting polymer network. As novel polymers and composites are developed, methods to efficiently screen cell response to these materials and their properties, including conversion, are needed. In this study, an in vitro screening methodology was developed to assess cells cultured directly on cross-linked polymer networks. A gradient in methacrylate double bond conversion was used to increase the experimental throughput. A substrate of 2,2-bis[4-(2-hydroxy-3-methacryloxypropoxy)phenyl] propane (BisGMA) and triethylene glycol dimethacrylate (TEGDMA) was prepared with a conversion ranging from 43.0% to 61.2%. Substrates aged for 7 days had no significant differences in surface roughness or hydrophilicity as a function of conversion. Leachables were detectable for at least 7 days using UV absorption, but their global cytotoxicity was insignificant after 5 days of aging. Thus, RAW 264.7 macrophage-like cells were cultured on aged substrates to evaluate the cell response to conversion, with possible contributions from the polymer network and local leachables. Conversions of 45% and 50% decreased viability (via calcein/ethidium staining) and increased apoptosis (via annexin-V staining). No significant changes (p>0.05) in tumor necrosis factor-alpha and interleukin-1beta gene expression, as measured by quantitative, real-time reverse transcription-polymerase chain reaction, were seen as conversion increased. Thus, conversions greater than 50% are recommended for equimolar BisGMA/TEGDMA. The ability to distinguish cell response as a function of conversion is useful as an initial biological screening platform to optimize dental polymers.

  19. Functional Human Vascular Network Generated in Photocrosslinkable Gelatin Methacrylate Hydrogels.

    PubMed

    Chen, Ying-Chieh; Lin, Ruei-Zeng; Qi, Hao; Yang, Yunzhi; Bae, Hojae; Melero-Martin, Juan M; Khademhosseini, Ali

    2012-05-23

    The generation of functional, 3D vascular networks is a fundamental prerequisite for the development of many future tissue engineering-based therapies. Current approaches in vascular network bioengineering are largely carried out using natural hydrogels as embedding scaffolds. However, most natural hydrogels present a poor mechanical stability and a suboptimal durability, which are critical limitations that hamper their widespread applicability. The search for improved hydrogels has become a priority in tissue engineering research. Here, the suitability of a photopolymerizable gelatin methacrylate (GelMA) hydrogel to support human progenitor cell-based formation of vascular networks is demonstrated. Using GelMA as the embedding scaffold, it is shown that 3D constructs containing human blood-derived endothelial colony-forming cells (ECFCs) and bone marrow-derived mesenchymal stem cells (MSCs) generate extensive capillary-like networks in vitro. These vascular structures contain distinct lumens that are formed by the fusion of ECFC intracellular vacuoles in a process of vascular morphogenesis. The process of vascular network formation is dependent on the presence of MSCs, which differentiate into perivascular cells occupying abluminal positions within the network. Importantly, it is shown that implantation of cell-laden GelMA hydrogels into immunodeficient mice results in a rapid formation of functional anastomoses between the bioengineered human vascular network and the mouse vasculature. Furthermore, it is shown that the degree of methacrylation of the GelMA can be used to modulate the cellular behavior and the extent of vascular network formation both in vitro and in vivo. These data suggest that GelMA hydrogels can be used for biomedical applications that require the formation of microvascular networks, including the development of complex engineered tissues.

  20. In vitro viability of external eye microbial flora in hydroxy-propyl-methylcellulose.

    PubMed

    Mastropasqua, L; Piccolomini, R; Carpineto, P; Ciancaglini, M; Falconio, G; Di Bonaventura, G; Costagliola, C; Gallenga, P E

    1999-01-01

    The aim of this study was to verify the in vitro influence of various dilutions of a viscoelastic substance containing 2% hydroxy-propyl-methylcellulose (HPMC) on the viability of some microbial strains representative of the normal flora of the external eye. Pure reference strain cultures of Candida albicans, Pseudomonas aeruginosa, Propionibacterium acnes, Staphylococcus aureus, Staphylococcus epidermidis and a fresh clinical isolate of Proteus mirabilis were selected for this study. Serial twofold dilutions of 2% HPMC, prepared so as to obtain a final concentration ranging from 50 to 0.78% of the product in sterile saline solution (0.85% NaCl), were taken out with a pipette that delivered 1.0 ml per tube. One hundred microliters of the abovementioned microbial inocula, used for the evaluation of the positive control of the test organism, were dispensed into each tube. After 24 h of incubation, 100 microl of samples were taken from each tube and plated into the specific medium for the growth of the test organism. After 24-48 h of incubation, these agar plates were examined and the colony-forming-unit count of each test organism was compared to the corresponding total colony count, acting as a positive control, in order to determine the quantitative variation of the test organism grown in the presence of the viscoelastic compounds. C. albicans and P. aeruginosa showed a statistically significant increase in growth with HPMC dilutions varying from 1:2 to 1:16. P. acnes and P. mirabilis growth was significantly reduced by all dilutions except for the 1:128 one. S. epidermidis growth was also significantly reduced in the presence of HPMC dilutions varying from 1:2 to 1:64. S. aureus growth was not significantly influenced. The viability of P. aeruginosa in HPMC dilutions needs to be carefully considered because of the ability of this organism to induce endophthalmitis, and the possibility that during cataract surgery, a small amount of HPMC may be left in the eye

  1. In vitro viability of external eye microbial flora in hydroxy-propyl-methylcellulose.

    PubMed

    Mastropasqua, L; Piccolomini, R; Carpineto, P; Ciancaglini, M; Falconio, G; Di Bonaventura, G; Costagliola, C; Gallenga, P E

    1999-01-01

    The aim of this study was to verify the in vitro influence of various dilutions of a viscoelastic substance containing 2% hydroxy-propyl-methylcellulose (HPMC) on the viability of some microbial strains representative of the normal flora of the external eye. Pure reference strain cultures of Candida albicans, Pseudomonas aeruginosa, Propionibacterium acnes, Staphylococcus aureus, Staphylococcus epidermidis and a fresh clinical isolate of Proteus mirabilis were selected for this study. Serial twofold dilutions of 2% HPMC, prepared so as to obtain a final concentration ranging from 50 to 0.78% of the product in sterile saline solution (0.85% NaCl), were taken out with a pipette that delivered 1.0 ml per tube. One hundred microliters of the abovementioned microbial inocula, used for the evaluation of the positive control of the test organism, were dispensed into each tube. After 24 h of incubation, 100 microl of samples were taken from each tube and plated into the specific medium for the growth of the test organism. After 24-48 h of incubation, these agar plates were examined and the colony-forming-unit count of each test organism was compared to the corresponding total colony count, acting as a positive control, in order to determine the quantitative variation of the test organism grown in the presence of the viscoelastic compounds. C. albicans and P. aeruginosa showed a statistically significant increase in growth with HPMC dilutions varying from 1:2 to 1:16. P. acnes and P. mirabilis growth was significantly reduced by all dilutions except for the 1:128 one. S. epidermidis growth was also significantly reduced in the presence of HPMC dilutions varying from 1:2 to 1:64. S. aureus growth was not significantly influenced. The viability of P. aeruginosa in HPMC dilutions needs to be carefully considered because of the ability of this organism to induce endophthalmitis, and the possibility that during cataract surgery, a small amount of HPMC may be left in the eye

  2. Determination of polycyclic aromatic hydrocarbons in coffee and tea samples by magnetic solid-phase extraction coupled with HPLC-FLD.

    PubMed

    Shi, Yating; Wu, Hao; Wang, Chaoqiong; Guo, Xiaozhen; Du, Juanli; Du, Liming

    2016-05-15

    This study reports the synthesis of a benign nano-adsorbent based on an ionic liquid of immobilized Fe3O4@3-(Trimethoxysilyl)propyl methacrylate@ionic liquid magnetic nanoparticles (Fe3O4@MPS@IL NPs). This material was applied to the magnetic solid phase extraction of seven heavy molecular weight polycyclic aromatic hydrocarbons (PAHs) from coffee and tea samples for high performance liquid chromatography coupled with fluorescence detection. The effects of various parameters of the analytical method were investigated, including pH, sorbent amount, desorption solvent, desorption volume, and extraction and desorption time. Under the optimized conditions, good linearities were obtained, with correlation coefficients (R(2)) between 0.9987 and 0.9998. The detection limits of the proposed method were in the range of 0.1-10ngL(-1). The spiked recoveries of the seven PAHs in coffee and tea samples ranged from 87.5% to 104.5%, with RSDs of less than 3.7%. In addition, a satisfactory reproducibility was achieved, with intra- and inter-day precisions with RSDs of less than 3.1% and 3.8%, respectively.

  3. Electrical Properties of PVP-SiO2-TMSPM Hybrid Thin Films as OFET Gate Dielectric

    NASA Astrophysics Data System (ADS)

    Bahari, A.; Shahbazi, M.

    2016-02-01

    Organic-inorganic polyvinylpyrrolidone-silicon dioxide-3-(trimethoxysilyl)propyl methacrylate (PVP-SiO2-TMSPM) hybrid solutions have been synthesized using the sol-gel process with different amounts of TMSPM as coupling agent and equivalent amounts of PVP and SiO2. Hybrid solutions were deposited on p-type Si(111) substrates using the spin coating technique, as a gate dielectric material for use in thin-film transistors. The structural properties of the samples were investigated using Fourier-transform infrared spectroscopy and x-ray diffraction analysis. Atomic force microscopy and scanning electron microscopy techniques were applied to study the topography and morphology of the hybrid thin-film samples. Current-voltage ( I- V) curves, capacitance-voltage ( C- V) measurements, and the electrical properties of the organic hybrid thin-film gate dielectrics were also studied in a metal-insulator/polymer-semiconductor structure. According to the results, the J GS curves in terms of V GS showed gate leakage current densities small enough for use as gate dielectric material at interface layers. At V DS = 30 V, in the saturation region, I DS curves in terms of V GS presented higher charge carrier mobility ( μ FET,S = 0.0584 cm2 s-1 V-1) due to lower dielectric constant ( k = 11.43) in the sample with 0.05 weight ratio of TMSPM compared with other samples with different weight ratios of TMSPM.

  4. Determination of polycyclic aromatic hydrocarbons in coffee and tea samples by magnetic solid-phase extraction coupled with HPLC-FLD.

    PubMed

    Shi, Yating; Wu, Hao; Wang, Chaoqiong; Guo, Xiaozhen; Du, Juanli; Du, Liming

    2016-05-15

    This study reports the synthesis of a benign nano-adsorbent based on an ionic liquid of immobilized Fe3O4@3-(Trimethoxysilyl)propyl methacrylate@ionic liquid magnetic nanoparticles (Fe3O4@MPS@IL NPs). This material was applied to the magnetic solid phase extraction of seven heavy molecular weight polycyclic aromatic hydrocarbons (PAHs) from coffee and tea samples for high performance liquid chromatography coupled with fluorescence detection. The effects of various parameters of the analytical method were investigated, including pH, sorbent amount, desorption solvent, desorption volume, and extraction and desorption time. Under the optimized conditions, good linearities were obtained, with correlation coefficients (R(2)) between 0.9987 and 0.9998. The detection limits of the proposed method were in the range of 0.1-10ngL(-1). The spiked recoveries of the seven PAHs in coffee and tea samples ranged from 87.5% to 104.5%, with RSDs of less than 3.7%. In addition, a satisfactory reproducibility was achieved, with intra- and inter-day precisions with RSDs of less than 3.1% and 3.8%, respectively. PMID:26775946

  5. Chemical-assisted bonding of thermoplastics/elastomer for fabricating microfluidic valves.

    PubMed

    Gu, Pan; Liu, Ke; Chen, Hong; Nishida, Toshikazu; Fan, Z Hugh

    2011-01-01

    Thermoplastics such as cyclic olefin copolymer (COC) and polymethylmethacrylate (PMMA) have been increasingly used in fabricating microfluidic devices. However, the state-of-the-art microvalve technology is a polydimethylsiloxane (PDMS)-based three-layer structure. In order to integrate such a valve with a thermoplastics-based microfluidic device, a bonding method for thermoplastics/PDMS must be developed. We report here a method to bond COC with PDMS through surface activation by corona discharge, surface modification using 3-(trimethoxysilyl)propyl methacrylate (TMSPMA), and thermal annealing. The method is also applicable to PMMA. The bonding strength between thermoplastics and PDMS was represented by the peeling force, which was measured using a method established by the International Organization for Standardization (ISO). The bonding strength measurement offered an objective and quantitative indicator for protocol optimization, as well as comparison with other PDMS-associated bonding methods. Using optimized bonding conditions, two valve arrays were fabricated in a COC/PDMS/COC device and cyclic operations of valve closing/opening were successfully demonstrated. The valve-containing devices withstood 100 psi (∼689 KPa) without delamination. Further, we integrated such valve arrays in a device for protein separation and demonstrated isoelectric focusing in the presence of valves.

  6. Characterization of bonding between poly(dimethylsiloxane) and cyclic olefin copolymer using corona discharge induced grafting polymerization.

    PubMed

    Liu, Ke; Gu, Pan; Hamaker, Kiri; Fan, Z Hugh

    2012-01-01

    Thermoplastics have been increasingly used for fabricating microfluidic devices because of their low cost, mechanical/biocompatible attributes, and well-established manufacturing processes. However, there is sometimes a need to integrate such a device with components made from other materials such as polydimethylsiloxane (PDMS). Bonding thermoplastics with PDMS to produce hybrid devices is not straightforward. We have reported our method to modify the surface property of a cyclic olefin copolymer (COC) substrate by using corona discharge and grafting polymerization of 3-(trimethoxysilyl)propyl methacrylate; the modified surface enabled strong bonding of COC with PDMS. In this paper, we report our studies on the surface modification mechanism using attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM) and contact angle measurement. Using this bonding method, we fabricated a three-layer (COC/PDMS/COC) hybrid device consisting of elastomer-based valve arrays. The microvalve operation was confirmed through the displacement of a dye solution in a fluidic channel when the elastomer membrane was pneumatically actuated. Valve-enabled microfluidic handling was demonstrated.

  7. Monomolecular layers and thin films of silane coupling agents by vapor-phase adsorption on oxidized aluminum

    SciTech Connect

    Kurth, D.G.; Bein, T.

    1992-08-06

    Thin films of tetraethoxysilane [TEOS], (3-bromopropyl)trimethoxysilane [BPS], trimethoxyvinylsilane [VS], and 3-(trimethoxysilyl) propyl methacrylate [TPM] on oxidized aluminum surfaces have been investigated by reflection-absorption FTIR spectroscopy, ellipsometry, contact angle, and quartz crystal microbalance (QCM) measurements. Gravimetric measurements with the QCM can reveal quantitative aspects of adsorption and film formation, even for films as thin as monolayers. Adsorption of these silane coupling agents from solution typically produces multilayer films. Vapor-phase adsorption of TEOS and TPM at room temperature results in monomolecular layers. The coupling agents VS and BPS require additional heating after the vapor-phase adsorption to initiate the hydrolysis and condensation reactions necessary for the surface attachment, which produces one to three layers. For vapor adsorbed films a packing density of 4-7 molecules/nm{sup 2} was found. The data strongly suggest that the organic moieties in several of these films have a preferential orientation on the surface; they can be viewed as two-dimensional, oligomeric siloxane networks with oriented organic chains. Subsequent heating of TPM films results in structural rearrangements; heating of TEOS results in complete condensation to SiO{sub 2} films. 43 refs., 6 figs., 4 tabs.

  8. Monitoring of acid-base status of workers at a methyl methacrylate and polymethyl methacrylate production plant in Bulgaria.

    PubMed

    Prakova, Gospodinka R

    2003-01-01

    This study was carried out on 104 workers at three work operations and a control (nonproduction) area, within a methyl methacrylate (MMA)/polymethyl methacrylate (PMMA) production facility in Bulgaria. Airborne monitoring was conducted over a 10-year period for MMA and the reactant chemicals methanol and acetone cyanhydrine at the MMA operation, and MMA was monitored at the PMMA operation. Acid-base status of the workers was evaluated using traditional criteria (pH, pCO(2), pO(2), and HCO(3) in plasma). Data from retrospective monitoring of air levels of the chemicals were compared with the acid-base status of workers at the plant. In some cases air concentrations exceeded the threshold limit value, with the highest percentage of overexposure occurring with airborne MMA in the PMMA production operation. Acid-base disruption indicated by reductions in plasma pH and HCO(3) was found for all groups except the control population. The highest percentage reduction was associated with PMMA production workers. Additionally, respiratory acidosis, indicated by increased pCO(2), was noted in the MMA production and maintenance groups, implying that the response to MMA exposure may involve both the metabolic and respiratory acidosis component. This study was unique in that the combined exposure to MMA and the precursor chemical (methanol) were shown to produce the same effects in workers. It is suggested that when combined exposure occurs, disruption of acid-base status may occur. Enforcement of PPM requirements for coveralls and gloves should prevent skin contamination. Additionally, improvement of equipment in MMA and PMMA production areas is recommended: (1) automation of some manual operations; (2) use of respiratory protection during equipment cleaning; and (3) installation of local ventilation when applicable.

  9. 1,2:5,6-Di-O-iso­propyl­idene-3-C-methyl-α-d-allo­furan­ose

    PubMed Central

    Forezi, Luana da Silva Magalhães; Silva, Marcos Moitrel Pequeno; Santos, Fernanda da Costa; Ferreira, Vitor Francisco; de Souza, Maria Cecília Bastos Vieira

    2013-01-01

    The title carbohydrate, C13H22O6, is a derivative of d-glycose, in which the furan­osidic and iso­propyl­idene rings are in twisted conformations. The mean plane of the furan­osidic ring makes a dihedral angle of 70.32 (18)° with the mean plane of the fused iso­propyl­idene ring. The methyl groups in the other iso­propyl­idene ring are disordered over two sets of sites, with an occupancy ratio of 0.74 (6):0.26 (6). In the crystal, mol­ecules are linked by O—H⋯O hydrogen bonds into chains with graph-set notation C(5) along [100]. Weak C—H⋯O interactions also occur. PMID:24098204

  10. Poly(pyrrole-co-pyrrole propylic acid) film and its application in label-free surface plasmon resonance immunosensors.

    PubMed

    Hu, Weihua; Li, Chang Ming; Dong, Hua

    2008-12-01

    In this work, surface plasmon resonance (SPR) was used to study protein immobilization on poly(pyrrole-co-pyrrole propylic acid) (PPy/PPa) for immunosensing applications. SPR was employed to in situ monitor the electropolymerization process and to control thickness of the PPy/PPa copolymer film. Goat IgG as a model protein was covalently immobilized on the carboxyl-containing film through EDC/NHS as the coupling reagents. The effect of pyrrole propylic acid (Pa) proportion in the deposition solution on the protein immobilization capability was systemically investigated. The immobilization efficiency was demonstrated by a label-free SPR immunosensor. The heterogeneous kinetics of the immune reaction was discussed. This work could provide a facile method to immobilize proteins on an electrode surface by electropolymerized copolymer, and renders a universal approach to in situ study the protein immobilization process and sensing kinetics for scientific insights of the heteroimmunosensing scheme particularly in surface chemistry and molecular biology for further improvement of immunosensors.

  11. Conformations and Barriers to Methyl Group Internal Rotation in Two Asymmetric Ethers: Propyl Methyl Ether and Butyl Methyl Ether

    NASA Astrophysics Data System (ADS)

    Long, B. E.; Dechirico, F.; Cooke, S. A.

    2012-06-01

    The conformational preferences of the O-C-C-C unit are important in many biological systems with the unit generally preferring a gauche configuration compared to an anti configuration. Butyl methyl ether and propyl methyl ether provide very simple systems for this phenomenom to manifest. Pure rotational spectra of the title molecules have been recorded using chirped pulse Fourier transform microwave spectroscopy (CP-FTMW). In the case of butyl methyl ether, only one conformer has been observed. This conformer has torsional angles of COCC = 180°, OCCC = 62° and CCCC = 180° (anti-gauche-anti) and rotational constants of A = 10259.4591(33) MHz, B = 1445.6470(13) MHz, and C = 1356.2944(14) MHz. The rotational spectrum was doubled and has been analyzed to produce an effective barrier to methyl group internal rotation of 780(35) cm-1. A prior rotational spectroscopic study on propyl methyl ether had focused only on the high energy anti-anti conformer. We have analyzed spectra from the lowest energy anti-gauche conformer and the spectroscopic constants will be presented. A summary of the differences in conformational energies and methyl group internal rotation barriers for the class of aliphatic asymmetric ethers will be presented. K. N. Houk, J. E. Eksterowicz, Y.-D. Wu, C. D. Fuglesang, D. B. Mitchell. J. Am. Chem. Soc. 115 (4170), 1993. Hiroshi Kato, Jun Nakagawa, Michiro Hayashi. J. Mol. Spectrosc. 80 (272), 1980.

  12. Evaluation of H2CHXdedpa, H2dedpa- and H2CHXdedpa-N,N'-propyl-2-NI ligands for (64)Cu(ii) radiopharmaceuticals.

    PubMed

    Ramogida, Caterina F; Boros, Eszter; Patrick, Brian O; Zeisler, Stefan K; Kumlin, Joel; Adam, Michael J; Schaffer, Paul; Orvig, Chris

    2016-08-16

    The chiral acyclic "pa" ligand (pa = picolinic acid) H2CHXdedpa (N4O2) and two NI-containing dedpa analogues (H2CHXdedpa-N,N'-propyl-2-NI, H2dedpa-N,N'-propyl-2-NI, NI = nitroimidazole) were studied as chelators for copper radiopharmaceuticals (CHX = cyclohexyl, H2dedpa = 1,2-[[carboxypyridin-2-yl]methylamino]ethane). The hexadentate ligand H2CHXdedpa was previously established as a superb system for (67/68)Ga radiochemistry. The solid state X-ray crystal structures of [Cu(CHXdedpa-N,N'-propyl-2-NI)] and [Cu(dedpa-N,N'-propyl-2-NI)] reveal the predicted hexadentate, distorted octahedral binding of the copper(ii) ion. Cyclic voltammetry of [Cu(dedpa-N,N'-propyl-2-NI)] shows that there is one reversible couple associated with the NI redox, and one irreversible but reproducible couple attributed to the Cu(ii)/Cu(i) redox cycle. Quantitative radiolabeling (>99%) of CHXdedpa(2-) and (dedpa-N,N'-propyl-2-NI)(2-) with (64)Cu was achieved under fast and efficient labeling conditions (10 min, RT, 0.5 M sodium acetate buffer, pH 5.5) at ligand concentrations as low as 10(-6) M. In vitro kinetic inertness studies of the (64)Cu labelled complexes were studied in human serum at 37 °C over 24 hours; [(64)Cu(CHXdedpa)] was found to be 98% stable compared to previously investigated [(64)Cu(dedpa)] which was only 72% intact after 24 hours. PMID:27161975

  13. Magnetic hydrophilic methacrylate-based polymer microspheres designed for polymerase chain reactions applications.

    PubMed

    Spanová, Alena; Horák, Daniel; Soudková, Eva; Rittich, Bohuslav

    2004-02-01

    Magnetic hydrophilic non-porous P(HEMA-co-EDMA), P(HEMA-co-GMA) and PGMA microspheres were prepared by dispersion (co)polymerization of 2-hydroxyethyl methacrylate (HEMA) and ethylene dimethacrylate (EDMA) or glycidyl methacrylate (GMA) in the presence of several kinds of magnetite. It was found that some components used in the preparation of magnetic carriers interfered with polymerase chain reaction (PCR). Influence of non-magnetic and magnetic microspheres, including magnetite nanoparticles and various components used in their synthesis, on the PCR course was thus investigated. DNA isolated from bacterial cells of Bifidobacterium longum was used in PCR evaluation of non-interfering magnetic microspheres. The method enabled verification of the incorporation of magnetite nanoparticles in the particular methacrylate-based polymer microspheres and evaluation of suitability of their application in PCR. Preferably, electrostatically stabilized colloidal magnetite (ferrofluid) should be used in the design of new magnetic methacrylate-based microspheres by dispersion polymerization. PMID:14698232

  14. 21 CFR 73.3121 - Poly(hydroxyethyl methacrylate)-dye copolymers.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ...(hydroxyethyl methacrylate)-dye copolymers. (a) Identity. The color additives are formed by reacting one or more... sulfate group (or groups) or chlorine substituent of the dye is replaced by an ether linkage to...

  15. 21 CFR 73.3121 - Poly(hydroxyethyl methacrylate)-dye copolymers.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ...(hydroxyethyl methacrylate)-dye copolymers. (a) Identity. The color additives are formed by reacting one or more... sulfate group (or groups) or chlorine substituent of the dye is replaced by an ether linkage to...

  16. 21 CFR 73.3121 - Poly(hydroxyethyl methacrylate)-dye copolymers.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ...(hydroxyethyl methacrylate)-dye copolymers. (a) Identity. The color additives are formed by reacting one or more... sulfate group (or groups) or chlorine substituent of the dye is replaced by an ether linkage to...

  17. 40 CFR 180.1065 - 2-Amino-4,5-dihydro-6-methyl-4-propyl-s-triazolo(1,5-alpha)pyrimidin-5-one; exemption from the...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...-Amino-4,5-dihydro-6-methyl-4-propyl-s-triazolo(1,5-alpha)pyrimidin-5-one; exemption from the requirement of a tolerance. The inert ingredient, 2-amino-4,5-dihydro-6-methyl-4-propyl-s-triazolo(1,5-alpha... 40 Protection of Environment 24 2011-07-01 2011-07-01 false...

  18. 40 CFR 180.1065 - 2-Amino-4,5-dihydro-6-methyl-4-propyl-s-triazolo(1,5-alpha)pyrimidin-5-one; exemption from the...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...-Amino-4,5-dihydro-6-methyl-4-propyl-s-triazolo(1,5-alpha)pyrimidin-5-one; exemption from the requirement of a tolerance. The inert ingredient, 2-amino-4,5-dihydro-6-methyl-4-propyl-s-triazolo(1,5-alpha... 40 Protection of Environment 23 2010-07-01 2010-07-01 false...

  19. SYNTHESIS OF METHYL METHACRYLATE FROM COAL-DERIVED SYNGAS

    SciTech Connect

    Makarand R. Gogate; James J. Spivey; Joseph R. Zoeller; Richard D. Colberg; Gerald N. Choi

    1999-07-19

    Research Triangle Institute (RTI), Eastman Chemical Company, and Bechtel collectively are developing a novel three-step process for the synthesis of methyl methacrylate (MMA) from coal-derived syngas that consists of the steps of synthesis of a propionate, its condensation with formaldehyde to form methacrylic acid (MAA), and esterification of MAA with methanol to produce MMA. The research team has completed the research on the three-step methanol-based route to MMA. Under an extension to the original contract, we are currently evaluating a new DME-based process for MMA. The key research need for DME route is to develop catalysts for DME partial oxidation reactions and DME condensation reactions. During the April-June quarter(04-06/99) the first in-situ formaldehyde generation from DME and condensation with methyl propionate is demonstrated and the results are summarized. The supported niobium catalyst shows better condensation activity, but supported tungsten catalyst has higher formaldehyde selectivity. The project team has also completed a 200-hour long term test of PA-HCHO condensation over 30% Nb{sub 2}O{sub 5}/SiO{sub 2}. Three activity cycles and two regeneration cycles were carried out. 30% Nb{sub 2}O{sub 5}/SiO{sub 2} showed similar MAA yields as 10% Nb{sub 2}O{sub 5}/SiO{sub 2} at 300 C. However, the deactivation appears to be slower with 30% Nb{sub 2}O{sub 5}/SiO{sub 2} than 10% Nb{sub 2}O{sub 5}/SiO{sub 2}. An detailed economic analysis of PA-HCHO condensation process for a 250 million lb/yr MMA plant is currently studied by Bechtel. Using the Amoco data-based azeotropic distillation model as the basis, an ASPEN flow sheet model was constructed to simulate the formaldehyde and propionic acid condensation processing section based on RTI's design data. The RTI MAA effluent azeotropic distillation column was found to be much more difficult to converge. The presence of non-condensible gases along with the byproduct DEK (both of which were not presented in

  20. Synthesis of Acrylates and Methacrylates from Coal-Derived Syngas.

    SciTech Connect

    Gogate, M.R.; Spivey, J.J.; Zoeller, J.R.; Colberg, R.D.; Choi, G.N.; Tam, S.S.

    1997-10-17

    Research Triangle Institute (RTI), Eastman Chemical Company, and Bechtel collectively are developing a novel process for the synthesis of methyl methacrylate (MMA) from coal-derived syngas, under a contract from the U.S. Department of Energy/Federal Energy Technology Center (DOE/FETC). This three-step process consists of synthesis of a propionate, its condensation with formaldehyde, and esterification of resulting methacrylic acid (MAA) with methanol to produce MMA. Over the last quarter, RTI carried out activity tests on a pure (99 percent) Nb{sub 2}O{sub 5} catalyst, received from Alfa Aesar, under the following experimental conditions: T=300 C; P=4 atm, 72:38:16:4:220 mmol/h, PA:H{sub 2}0:HCHO:CH{sub 3}0H:N{sub 2}; 5-g catalyst charge. For the pure material, the MAA yields (based on HCHO and PA) were at 8.8 and 1.5 percent, clearly inferior compared to those for a 10-percent Nb{sub 2}O{sub 5}/Si0{sub 2} catalyst (20.1 and 4.5 percent). The X-ray diffraction (XRD) patterns of pure Nb{sub 2}O{sub 5} and 20-percent Nb{sub 2}O{sub 5}/Si0{sub 2} that while pure Nb{sub 2}O{sub 5} is very highly crystalline, Si0{sub 2} support for an amorphous nature of the 20 percent Nb{sub 2}O{sub 5}/Si0{sub 2} catalyst the last quarter, RTI also began research on the use of dimethyl ether (DME), product of methanol dehydrocondensation, as an alternate feedstock in MMA synthesis. As a result, formaldehyde is generated either externally or in situ, from DME, in the process envisaged in the contract extension. The initial work on the DME extension of the contract focuses on a tradeoff analysis that will include a preliminary economic analysis of the DME and formaldehyde routes and catalyst synthesis and testing for DME partial oxidation and condensation reactions. Literature guides exist for DME partial oxidation catalysts; however, there are no precedent studies on catalyst development for DME-methyl propionate (MP) condensation reactions, thereby making DME-MP reaction studies a

  1. SYNTHESIS OF METHYL METHACRYLATE FROM COAL-DERIVED SYNGAS

    SciTech Connect

    BEN W.-L. JANG; GERALD N. CHOI; JAMES J. SPIVEY; JOSPEH R. ZOELLER; RICHARD D. COLBERG

    1998-10-20

    Research Triangle Institute (RTI), Eastman Chemical Company, and Bechtel collectively are developing a novel three-step process for the synthesis of methyl methacrylate (MMA) from coal-derived syngas that consists of the steps of synthesis of a propionate, its condensation with formaldehyde to form methacrylic acid (MAA), and esterification of MAA with methanol to produce MMA. RTI has completed the research on the three-step methanol-based route to MMA. Under an extension to the original contract, RTI is currently evaluating a new DME-based process for MMA. The key research need for DME route is to develop catalysts for DME partial oxidation reactions and DME condensation reactions. Over the last quarter (July-September, 1998), the project team has completed the continuous condensation of formaldehyde with propionic acid over 10% Nb{sub 2}O{sub 5}/SiO{sub 2} at 300 C. Six activity and five regeneration cycles have been completed. The results show that 10% Nb{sub 2}O{sub 5}/SiO{sub 2} deactivates slowly with time but can be regenerated to its original activity with 2% O{sub 2} in nitrogen over night at 400 C. We have investigated the effects of regeneration, propionic acid/formaldehyde ratio (PA/HCHO = 4.5/1 to 1.5/1) and reaction temperature(280-300 C) on reaction activity and product selectivity over 20% Nb{sub 2}O{sub 5}/SiO{sub 2} catalysts. The regeneration effect on 20% Nb{sub 2}O{sub 5}/SiO{sub 2} is similar to the effect on 10% Nb{sub 2}O{sub 5}/SiO{sub 2}. The regeneration can bring the deactivated catalyst to its original activity. However, the selectivity to MAA decreases with regeneration while the selectivity to DEK and CO{sub 2} increases. When PA/HCHO ratio is decreased from 4.5/1 to 2.25/1 then to 1.5/1 at 300 C the MAA yield decreases but the MAA selectivity first increases then decreases. Decreasing the reaction temperature from 300 C to 280 C decreases the MAA yield from 39.5% to 30.7% but increases the MAA selectivity from 73.7% to 82.2%. The

  2. Novel catalysts for the environmentally friendly synthesis of methyl methacrylate

    SciTech Connect

    Spivey, J.J.; Gogate, M.R.; Zoeller, J.R.; Colberg, R.D.

    1997-11-01

    The development of a process for the synthesis of methyl methacrylate (MMA) from coal-derived syngas can alleviate the environmental hazards associated with the current commercial MMA technology, the acetone cyanohydrin (ACH) process. A three-step syngas-based process consisted of synthesis of a propionic acid, its condensation with formaldehyde, and esterification of resulting methacrylic acid (MAA) to form MMA. The first two steps, propionic acid synthesis and condensation, are discussed here. The low-temperature, low-pressure process for single-step hydrocarbonylation of ethylene to propionic acid is carried out using a homogeneous iodine-promoted Mo(CO){sub 6} catalyst at pressures (30--70 atm) and temperatures (150--200 C) lower than those reported for other catalysts. Mechanistic investigations suggest that catalysis is initiated by a rate-limiting CO dissociation from Mo(CO){sub 6}. This dissociation appears to be followed by an inner electron-transfer process of an I atom from EtI to the coordinately unsaturated Mo(CO){sub 5}. This homogeneous catalyst for propionate synthesis represents the first case of an efficient carbonylation process based on Cr group metals. The condensation of formaldehyde with propionic acid is carried out by acid-base bifunctional catalysts. As a result of screening over 80 catalytic materials, group V metals supported on an amorphous silica are found to be most effective. A 20% Nb/SiO{sub 2} catalyst appears to be the most active and stable catalyst thus far. Preliminary relations among the reaction yield and catalyst properties indicate that a high surface area and a low overall surface acidity (<50 = mol of NH{sub 3}/g), with a high proportion of the acidity being weak (<350 C desorption of NH{sub 3}), are desirable. Long-term deactivation of V-Si-P, Nb-Si, and Ta-Si catalysts suggests that carbon deposition is the primary cause for activity decay, and the catalyst activity is partially restorable by oxidative regeneration.

  3. Staining methods applied to glycol methacrylate embedded tissue sections.

    PubMed

    Cerri, P S; Sasso-Cerri, E

    2003-01-01

    The use of glycol methacrylate (GMA) avoids some technical artifacts, which are usually observed in paraffin-embedded sections, providing good morphological resolution. On the other hand, weak staining have been mentioned during the use of different methods in plastic sections. In the present study, changes in the histological staining procedures have been assayed during the use of staining and histochemical methods in different GMA-embedded tissues. Samples of tongue, submandibular and sublingual glands, cartilage, portions of respiratory tract and nervous ganglion were fixed in 4% formaldehyde and embedded in glycol methacrylate. The sections of tongue and nervous ganglion were stained by H&E. Picrosirius, Toluidine Blue and Sudan Black B methods were applied, respectively, for identification of collagen fibers in submandibular gland, sulfated glycosaminoglycans in cartilage (metachromasia) and myelin lipids in nervous ganglion. Periodic Acid-Schiff (PAS) method was used for detection of glycoconjugates in submandibular gland and cartilage while AB/PAS combined methods were applied for detection of mucins in the respiratory tract. In addition, a combination of Alcian Blue (AB) and Picrosirius methods was also assayed in the sublingual gland sections. The GMA-embedded tissue sections showed an optimal morphological integrity and were favorable to the staining methods employed in the present study. In the sections of tongue and nervous ganglion, a good contrast of basophilic and acidophilic structures was obtained by H&E. An intense eosinophilia was observed either in the striated muscle fibers or in the myelin sheaths in which the lipids were preserved and revealed by Sudan Black B. In the cartilage matrix, a strong metachromasia was revealed by Toluidine Blue in the negatively-charged glycosaminoglycans. In the chondrocytes, glycogen granules were intensely positive to PAS method. Extracellular glycoproteins were also PAS positive in the basal membrane and in the

  4. Barrier layers against oxygen transmission on the basis of electron beam cured methacrylated gelatin

    NASA Astrophysics Data System (ADS)

    Scherzer, Tom

    1997-08-01

    The development of barrier layers against oxygen transmission on the basis of radiation-curable methacrylated gelatin will be reported. The electron beam cured gelatin coatings show an extremely low oxygen permeability and a high resistance against boiling water. Moreover, the methacrylated gelatins possess good adhesion characteristics. Therefore, they are suited as barrier adhesives in laminates for food packaging applications. If substrate foils from biodegradable polymers are used, the development of completely biodegradable packaging materials seems to be possible.

  5. Transparent and luminescent ionogels composed of Eu(3+)-coordinated ionic liquids and poly(methyl methacrylate).

    PubMed

    Zhou, Fan; Wang, Tianren; Li, Zhiqiang; Wang, Yige

    2015-12-01

    We report here on transparent and luminescent ionogels that consist of ionic ternary europium (III) complexes and the inexpensive non-toxic compound, poly(methyl methacrylate) (PMMA) and that were formed by dissolving these complexes in methacrylate (MMA) monomers followed by in situ polymerization. The resulting ionogels show a bright red emission under near-UV light irradiation. Luminescence data confirm the energy transfer from terpyridine-functionalized ionic liquid to Eu(3+) ions.

  6. Holographic Recording in Methacrylate Photopolymer Film Codoped with Benzyl n-Butyl Phthalate and Silica Nanoparticles

    NASA Astrophysics Data System (ADS)

    Takahashi, Hiroshi; Naito, Takahiro; Tomita, Yasuo

    2006-06-01

    Transmission volume holograms recorded in methacrylate photopolymer films codoped with benzyl n-butyl phthalate (BBP) and silica nanoparticles are studied. It is found that BBP, which is a well-known plasticizer, can be directly mixed with methacrylate monomer and that a refractive index modulation as high as ˜0.006 is recorded with a BBP concentration of 36 vol %. It is also found that the additional dispersion of silica nanoparticles substantially suppresses polymerization shrinkage without increasing optical scattering loss.

  7. The siloxane bond in contact lens materials: the siloxanyl alkyl methacrylate copolymers.

    PubMed

    Refojo, M F

    1984-11-01

    The siloxanyl alkyl methacrylate copolymers with methyl methacrylate and other components including hydrophilic monomers and crosslinking agents are used to make siloxane methacrylate oxygen-permeable rigid contact lenses. These copolymers contain the element silicon as siloxane bonds in side branches of the main polymer chain, which is made of carbon-to-carbon bonds. The siloxane bonds are the main contributing factor to the oxygen permeability of these materials. Because silicone is not a component of these contact lenses, it is not appropriate to refer to them as silicone methacrylate contact lenses. This paper analyzes data from three fundamental patents and gives the oxygen permeability coefficients of three types of siloxanyl alkyl methacrylate copolymers. In one type the siloxanyl component contains two silicon atoms, in the second type it contains three silicon atoms, and in the third type it contains four silicon atoms. A general relationship, expressed by a power function, is developed between the oxygen permeability coefficients of siloxanyl alkyl methacrylate copolymers and dimethylsilicone rubber and their percent disiloxane or silicon content. PMID:6517434

  8. In vivo genotoxicity assessment of acrylamide and glycidyl methacrylate.

    PubMed

    Dobrovolsky, Vasily N; Pacheco-Martinez, M Monserrat; McDaniel, L Patrice; Pearce, Mason G; Ding, Wei

    2016-01-01

    Acrylamide (ACR) and glycidyl methacrylate (GMA) are structurally related compounds used for making polymers with various properties. Both chemicals can be present in food either as a byproduct of processing or a constituent of packaging. We performed a comprehensive evaluation of ACR and GMA genotoxicity in Fisher 344 rats using repeated gavage administrations. Clastogenicity was measured by scoring micronucleated (MN) erythrocytes from peripheral blood, DNA damage in liver, bone marrow and kidneys was measured using the Comet assay, and gene mutation was measured using the red blood cell (RBC) and reticulocyte Pig-a assay. A limited histopathology evaluation was performed in order to determine levels of cytotoxicity. Doses of up to 20 mg/kg/day of ACR and up to 250 mg/kg/day of GMA were used. ACR treatment resulted in DNA damage in the liver, but not in the bone marrow. While ACR was not a clastogen, it was a weak (equivocal) mutagen in the cells of bone marrow. GMA caused DNA damage in the cells of bone marrow, liver and kidney, and induced MN reticulocytes and Pig-a mutant RBCs in a dose-dependent manner. Collectively, our data suggest that both compounds are in vivo genotoxins, but the genotoxicity of ACR is tissue specific.

  9. Ageing and moisture uptake in polymethyl methacrylate (PMMA) bone cements☆

    PubMed Central

    Ayre, Wayne Nishio; Denyer, Stephen P.; Evans, Samuel L.

    2014-01-01

    Bone cements are extensively employed in orthopaedics for joint arthroplasty, however implant failure in the form of aseptic loosening is known to occur after long-term use. The exact mechanism causing this is not well understood, however it is thought to arise from a combination of fatigue and chemical degradation resulting from the hostile in vivo environment. In this study, two commercial bone cements were aged in an isotonic fluid at physiological temperatures and changes in moisture uptake, microstructure and mechanical and fatigue properties were studied. Initial penetration of water into the cement followed Fickian diffusion and was thought to be caused by vacancies created by leaching monomer. An increase in weight of approximately 2% was experienced after 30 days ageing and was accompanied by hydrolysis of poly(methyl methacrylate) (PMMA) in the outermost layers of the cement. This molecular change and the plasticising effect of water resulted in reduced mechanical and fatigue properties over time. Cement ageing is therefore thought to be a key contributor in the long-term failure of cemented joint replacements. The results from this study have highlighted the need to develop cements capable of withstanding long-term degradation and for more accurate test methods, which fully account for physiological ageing. PMID:24445003

  10. Directed endothelial cell morphogenesis in micropatterned gelatin methacrylate hydrogels.

    PubMed

    Nikkhah, Mehdi; Eshak, Nouran; Zorlutuna, Pinar; Annabi, Nasim; Castello, Marco; Kim, Keekyoung; Dolatshahi-Pirouz, Alireza; Edalat, Faramarz; Bae, Hojae; Yang, Yunzhi; Khademhosseini, Ali

    2012-12-01

    Engineering of organized vasculature is a crucial step in the development of functional and clinically relevant tissue constructs. A number of previous techniques have been proposed to spatially regulate the distribution of angiogenic biomolecules and vascular cells within biomaterial matrices to promote vascularization. Most of these approaches have been limited to two-dimensional (2D) micropatterned features or have resulted in formation of random vasculature within three-dimensional (3D) microenvironments. In this study, we investigate 3D endothelial cord formation within micropatterned gelatin methacrylate (GelMA) hydrogels with varying geometrical features (50-150 μm height). We demonstrated the significant dependence of endothelial cells proliferation, alignment and cord formation on geometrical dimensions of the patterned features. The cells were able to align and organize within the micropatterned constructs and assemble to form cord structures with organized actin fibers and circular/elliptical cross-sections. The inner layer of the cord structure was filled with gel showing that the micropatterned hydrogel constructs guided the assembly of endothelial cells into cord structures. Notably, the endothelial cords were retained within the hydrogel microconstructs for all geometries after two weeks of culture; however, only the 100 μm-high constructs provided the optimal microenvironment for the formation of circular and stable cord structures. Our findings suggest that endothelial cord formation is a preceding step to tubulogenesis and the proposed system can be used to develop organized vasculature for engineered tissue constructs.

  11. Directed Endothelial Cell Morphogenesis in Micropatterned Gelatin Methacrylate Hydrogels

    PubMed Central

    Nikkhah, Mehdi; Eshak, Nouran; Zorlutuna, Pinar; Annabi, Nasim; Castello, Marco; Kim, Keekyoung; Dolatshahi-Pirouz, Alireza; Edalat, Faramarz; Bae, Hojae; Yang, Yunzhi; Khademhosseini, Ali

    2013-01-01

    Engineering of organized vasculature is a crucial step in the development of functional and clinically relevant tissue constructs. A number of previous techniques have been proposed to spatially regulate the distribution of angiogenic biomolecules and vascular cells within biomaterial matrices to promote vascularization. Most of these approaches have been limited to two-dimensional (2D) micropatterned features or have resulted in formation of random vasculature within three-dimensional (3D) microenvironments. In this study, we investigate 3D endothelial cord formation within micropatterned gelatin methacrylate (GelMA) hydrogels with varying geometrical features (50–150 µm height). We demonstrated the significance dependence of endothelial cells proliferation, alignment and cord formation on geometrical dimensions of the patterned features. The cells were able to align and organize within the micropatterned constructs and assemble to form cord structures with organized actin fibers and circular/elliptical cross-sections. The inner layer of the cord structure was filled with gel showing that the micropatterned hydrogel constructs guided the assembly of endothelial cells into cord structures. Notably, the endothelial cords were retained within the hydrogel microconstructs for all geometries after two weeks of culture; however, only the 100 µm-high constructs provided the optimal microenvironment for the formation of circular and stable cord structures. Our findings suggest that endothelial cord formation is a preceding step to tubulogenesis and the proposed system can be used to develop organized vasculature for engineered tissue constructs. PMID:23018132

  12. Manufacture of poly(methyl methacrylate) microspheres using membrane emulsification.

    PubMed

    Bux, Jaiyana; Manga, Mohamed S; Hunter, Timothy N; Biggs, Simon

    2016-07-28

    Accurate control of particle size at relatively narrow polydispersity remains a key challenge in the production of synthetic polymer particles at scale. A cross-flow membrane emulsification (XME) technique was used here in the preparation of poly(methyl methacrylate) microspheres at a 1-10 l h(-1) scale, to demonstrate its application for such a manufacturing challenge. XME technology has previously been shown to provide good control over emulsion droplet sizes with careful choice of the operating conditions. We demonstrate here that, for an appropriate formulation, equivalent control can be gained for a precursor emulsion in a batch suspension polymerization process. We report here the influence of key parameters on the emulsification process; we also demonstrate the close correlation in size between the precursor emulsion and the final polymer particles. Two types of polymer particle were produced in this work: a solid microsphere and an oil-filled matrix microcapsule.This article is part of the themed issue 'Soft interfacial materials: from fundamentals to formulation'.

  13. Thermal Properties of Polymethyl Methacrylate Composite Containing Copper Nanoparticles.

    PubMed

    Yu, Wei; Xie, Huaqing; Xin, Sha; Yin, Junshan; Jiang, Yitong; Wang, Mingzhu

    2015-04-01

    Thermal functional Materials have wide applications in thermal management fields, and inserting highly thermal conductive materials is effective in enhancing thermal conductivity of matrix. In this paper, copper nanoparticles were selected as the additive to prepare polymethyl methacrylate (PMMA) based nanocomposite with enhanced thermal properties. Uniform copper nanoparticles with pure face-centered lattice were prepared by liquid phase reduction method. Then, they were added into PMMA/N, N-Dimethylmethanamide (DMF) solution according to the different mass fraction for uniform dispersion. After DMF was evaporated, Cu-PMMA nanocomposites were gained. The thermal analysis measurement results showed that the decomposition temperature of nanocomposites decreased gradually with the increasing particle loadings. The thermal conductivity of the Cu-PMMA nanocomposites rose with the increasing contents of copper nanoparticles. With a 20 vol.% addition, the thermal conductivity was up to 1.2 W/m · K, a 380.5% increase compared to the pure PMMA. The results demonstrate that copper nanoparticles have great potential in enhancing thermal transport properties of polymer.

  14. Methyl methacrylate and respiratory sensitization: A Critical review

    PubMed Central

    Borak, Jonathan; Fields, Cheryl; Andrews, Larry S; Pemberton, Mark A

    2011-01-01

    Methyl methacrylate (MMA) is a respiratory irritant and dermal sensitizer that has been associated with occupational asthma in a small number of case reports. Those reports have raised concern that it might be a respiratory sensitizer. To better understand that possibility, we reviewed the in silico, in chemico, in vitro, and in vivo toxicology literature, and also epidemiologic and occupational medicine reports related to the respiratory effects of MMA. Numerous in silico and in chemico studies indicate that MMA is unlikely to be a respiratory sensitizer. The few in vitro studies suggest that MMA has generally weak effects. In vivo studies have documented contact skin sensitization, nonspecific cytotoxicity, and weakly positive responses on local lymph node assay; guinea pig and mouse inhalation sensitization tests have not been performed. Cohort and cross-sectional worker studies reported irritation of eyes, nose, and upper respiratory tract associated with short-term peaks exposures, but little evidence for respiratory sensitization or asthma. Nineteen case reports described asthma, laryngitis, or hypersensitivity pneumonitis in MMA-exposed workers; however, exposures were either not well described or involved mixtures containing more reactive respiratory sensitizers and irritants.The weight of evidence, both experimental and observational, argues that MMA is not a respiratory sensitizer. PMID:21401327

  15. Spallation Characteristics of Poly-Methyl Meth-Acrylic (PMMA)

    NASA Astrophysics Data System (ADS)

    Bartkowski, Peter; Dandekar, D. P.

    1999-06-01

    This work describes the results derived from plane shock wave spallation experiments performed on Poly-Methyl Meth-Acrylic (PMMA) Polymer. These experiments were conducted using the Army Research Laboratories 102 mm Bore, 8 m long Light Gas Gun located at Aberdeen Proving Ground, MD. The PMMA used in this work was manufactured by Rohm & Haas as their Ultra-Violet Absorbing (UVA), Type II Plexiglass. Its density is 1.188 Mg/m3 and longitudinal shock velocity is 2.72 mm/μ s. Spallation experiments were conducted at impact stresses between 0.2 and 2.0 GPa. The PMMA appears to exhibit a constant tensile strength of 0.15 GPa up to an impact stress of 0.75 GPa. Unlike metal and ceramic materials, the PMMA exhibits a dwell time in the spallation inversly proportional to the impact stress. At a low impact stress of 0.40 GPa, spallation of the PMMA occurs over a time period of 0.80 micro-seconds. At an impact stress of 0.75 GPa, the spallation occurs over 0.40 micro-seconds. This variation in time required to spall the PMMA will be analyzed and theories discussed.

  16. Characterization of methacrylate chromatographic monoliths bearing affinity ligands.

    PubMed

    Černigoj, Urh; Vidic, Urška; Nemec, Blaž; Gašperšič, Jernej; Vidič, Jana; Lendero Krajnc, Nika; Štrancar, Aleš; Podgornik, Aleš

    2016-09-16

    We investigated effect of immobilization procedure and monolith structure on chromatographic performance of methacrylate monoliths bearing affinity ligands. Monoliths of different pore size and various affinity ligands were prepared and characterized using physical and chromatographic methods. When testing protein A monoliths with different protein A ligand densities, a significant nonlinear effect of ligand density on dynamic binding capacity (DBC) for IgG was obtained and accurately described by Langmuir isotherm curve enabling estimation of protein A utilization as a function of ligand density. Maximal IgG binding capacity was found to be at least 12mg/mL exceeding theoretical monolayer adsorption value of 7.8mg/mL assuming hexagonal packing and IgG hydrodynamic diameter of 11nm. Observed discrepancy was explained by shrinkage of IgG during adsorption on protein A experimentally determined through calculated adsorbed IgG layer thickness of 5.4nm from pressure drop data. For monoliths with different pore size maximal immobilized densities of protein A as well as IgG dynamic capacity linearly correlates with monolith surface area indicating constant ligand utilization. Finally, IgGs toward different plasma proteins were immobilized via the hydrazide coupling chemistry to provide oriented immobilization. DBC was found to be flow independent and was increasing with the size of bound protein. Despite DBC was lower than IgG capacity to immobilized protein A, ligand utilization was higher. PMID:27554023

  17. Manufacture of poly(methyl methacrylate) microspheres using membrane emulsification.

    PubMed

    Bux, Jaiyana; Manga, Mohamed S; Hunter, Timothy N; Biggs, Simon

    2016-07-28

    Accurate control of particle size at relatively narrow polydispersity remains a key challenge in the production of synthetic polymer particles at scale. A cross-flow membrane emulsification (XME) technique was used here in the preparation of poly(methyl methacrylate) microspheres at a 1-10 l h(-1) scale, to demonstrate its application for such a manufacturing challenge. XME technology has previously been shown to provide good control over emulsion droplet sizes with careful choice of the operating conditions. We demonstrate here that, for an appropriate formulation, equivalent control can be gained for a precursor emulsion in a batch suspension polymerization process. We report here the influence of key parameters on the emulsification process; we also demonstrate the close correlation in size between the precursor emulsion and the final polymer particles. Two types of polymer particle were produced in this work: a solid microsphere and an oil-filled matrix microcapsule.This article is part of the themed issue 'Soft interfacial materials: from fundamentals to formulation'. PMID:27298430

  18. Properties of holographic gratings photoinduced in polymethyl methacrylate.

    PubMed

    Moran, J M; Kaminow, I P

    1973-08-01

    Polymethyl methacrylate, PMMA, sensitized for lambda = 0.325 microm, is shown to exhibit a peak refractive index change of 2.3 x 10(-3). The index change has been characterized in relation to its sensitivity, temperature dependence, and development time. The sensitivity of the material is shown to be 1.7 x10(-4) alpha, where alpha is the intensity absorption coefficient. Laser light scattered by an exposed region is found to produce a double ring pattern due to the graininess of the index variation. Three-dimensional holographic diffraction gratings were made in the PMMA, and its diffraction efficiency was measured as a function of thickness, refractive index change, and reconstruction angle. The efficiencies measured agree fairly well with the theoretical sin(2) curve; however, higher peak diffraction efficiencies were obtained further out on this oscillatory curve. A maximum diffraction efficiency of 96% was obtained. Angular sensitivity measurements indicated that the effective thickness of the grating was less than its actual thickness due to the nonuniformity of the index variation with thickness. Potential applications as a dielectric waveguide, diffraction grating, and wavelength selector are discussed. Scattering, the relatively small maximum index change, and poor reproducibility are the chief limiting factors.

  19. Spectrophotometric Determination of 6-Propyl-2-Thiouracil in Pharmaceutical Formulations Based on Prussian Blue Complex Formation: An Undergraduate Instrumental Analysis Laboratory Experiment

    ERIC Educational Resources Information Center

    Zakrzewski, Robert; Skowron, Monika; Ciesielski, Witold; Rembisz, Zaneta

    2016-01-01

    The laboratory experiment challenges students to determine 6-propyl-2-thiouracil (PTU) based on Prussian blue complex formation. Prussian blue is formed by ferricyanide and Fe(II) ions which are generated in situ from Fe(III) ions reduced by PTU. The absorbance of this product was measured at a wavelength of 840 nm, after a reaction time of 30…

  20. One-pot synthesis with in situ preconcentration of spherical monodispersed gold nanoparticles using thermoresponsive 3-(alkyldimethylammonio)-propyl sulfate zwitterionic surfactants.

    PubMed

    Takagai, Yoshitaka; Miura, Ryo; Endo, Arata; Hinze, Willie L

    2016-08-21

    Homogeneous solutions of thermoresponsive zwitterionic 3-(alkyldimethylammonio)-propyl sulfate surfactants at elevated temperatures were employed for the synthesis of gold nanoparticles (AuNPs) by the citrate reduction method. Upon cooling at completion of the reaction, the mixture phase separates with the monodispersed AuNPs condensed and concentrated in the small volume surfactant-rich phase. PMID:27430646

  1. 40 CFR 721.9516 - Siloxanes and silicones, 3-[(2-aminoethyl) amino]propyl Me, di-Me, reaction products with...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ..., di-Me, reaction products with polyethylene-polypropylene glycol Bu glycidal ether. 721.9516 Section... Substances § 721.9516 Siloxanes and silicones, 3- propyl Me, di-Me, reaction products with polyethylene..., reaction products with polyethylene-polypropylene glycol Bu glycidyl ether (PMN P-97-740; CAS No....

  2. 40 CFR 721.9516 - Siloxanes and silicones, 3-[(2-aminoethyl) amino]propyl Me, di-Me, reaction products with...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ..., di-Me, reaction products with polyethylene-polypropylene glycol Bu glycidal ether. 721.9516 Section... Substances § 721.9516 Siloxanes and silicones, 3- propyl Me, di-Me, reaction products with polyethylene..., reaction products with polyethylene-polypropylene glycol Bu glycidyl ether (PMN P-97-740; CAS No....

  3. 40 CFR 721.9516 - Siloxanes and silicones, 3-[(2-aminoethyl) amino]propyl Me, di-Me, reaction products with...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ..., di-Me, reaction products with polyethylene-polypropylene glycol Bu glycidal ether. 721.9516 Section... Substances § 721.9516 Siloxanes and silicones, 3- propyl Me, di-Me, reaction products with polyethylene..., reaction products with polyethylene-polypropylene glycol Bu glycidyl ether (PMN P-97-740; CAS No....

  4. 40 CFR 721.9516 - Siloxanes and silicones, 3-[(2-aminoethyl) amino]propyl Me, di-Me, reaction products with...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ..., di-Me, reaction products with polyethylene-polypropylene glycol Bu glycidal ether. 721.9516 Section... Substances § 721.9516 Siloxanes and silicones, 3- propyl Me, di-Me, reaction products with polyethylene..., reaction products with polyethylene-polypropylene glycol Bu glycidyl ether (PMN P-97-740; CAS No....

  5. 40 CFR 721.9516 - Siloxanes and silicones, 3-[(2-aminoethyl) amino]propyl Me, di-Me, reaction products with...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ..., di-Me, reaction products with polyethylene-polypropylene glycol Bu glycidal ether. 721.9516 Section... Substances § 721.9516 Siloxanes and silicones, 3- propyl Me, di-Me, reaction products with polyethylene..., reaction products with polyethylene-polypropylene glycol Bu glycidyl ether (PMN P-97-740; CAS No....

  6. Neurotoxicological and thyroid evaluations of rats developmentally exposed to tris(1,3-dichloro-2-propyl)phosphate (TDICPP) and tris(2-chloro-2-ethyl)phosphate(TCEP)

    EPA Science Inventory

    ABSTRACT: Tris(1,3-dichloro-2-propyl)phosphate (TDICPP) and tris(2-chloro-2-ethyl)phosphate (TCEP) are organophosphorous flame retardants with widespread usage and human exposures through food, inhalation, and dust ingestion. They have been detected in human tissues including ur...

  7. Poly(glycidyl methacrylate-co-2-hydroxyethyl methacrylate) Brushes as Peptide/Protein Microarray Substrate for Improving Protein Binding and Functionality.

    PubMed

    Lei, Zhen; Gao, Jiaxue; Liu, Xia; Liu, Dianjun; Wang, Zhenxin

    2016-04-27

    We developed a three-dimensional (3D) polymer-brush substrate for protein and peptide microarray fabrication, and this substrate was facilely prepared by copolymerization of glycidyl methacrylate (GMA) and 2-hydroxyethyl methacrylate (HEMA) monomers via surface-initiated atom transfer radical polymerization (SI-ATRP) on a glass slide. The performance of obtained poly(glycidyl methacrylate-co-2-hydroxyethyl methacrylate) (P(GMA-HEMA)) brush substrate was assessed by binding of human IgG with rabbit antihuman IgG antibodies on a protein microarray and by the determination of matrix metalloproteinase (MMP) activities on a peptide microarray. The P(GMA-HEMA) brush substrate exhibited higher immobilization capacities for proteins and peptides than those of a two-dimensional (2D) planar epoxy slide. Furthermore, the sensitivity of the P(GMA-HEMA) brush-based microarray on rabbit antihuman IgG antibody detection was much higher than that of its 2D counterpart. The enzyme activities of MMPs were determined specifically with a low detection limit of 6.0 pg mL(-1) for MMP-2 and 5.7 pg mL(-1) for MMP-9. By taking advantage of the biocompatibility of PHEMA, the P(GMA-HEMA) brush-based peptide microarray was also employed to evaluate the secretion of MMP-2 and MMP-9 by cells cultured off the chip or directly on the chip, and satisfactory results were obtained. PMID:27049528

  8. Poly(glycidyl methacrylate-co-2-hydroxyethyl methacrylate) Brushes as Peptide/Protein Microarray Substrate for Improving Protein Binding and Functionality.

    PubMed

    Lei, Zhen; Gao, Jiaxue; Liu, Xia; Liu, Dianjun; Wang, Zhenxin

    2016-04-27

    We developed a three-dimensional (3D) polymer-brush substrate for protein and peptide microarray fabrication, and this substrate was facilely prepared by copolymerization of glycidyl methacrylate (GMA) and 2-hydroxyethyl methacrylate (HEMA) monomers via surface-initiated atom transfer radical polymerization (SI-ATRP) on a glass slide. The performance of obtained poly(glycidyl methacrylate-co-2-hydroxyethyl methacrylate) (P(GMA-HEMA)) brush substrate was assessed by binding of human IgG with rabbit antihuman IgG antibodies on a protein microarray and by the determination of matrix metalloproteinase (MMP) activities on a peptide microarray. The P(GMA-HEMA) brush substrate exhibited higher immobilization capacities for proteins and peptides than those of a two-dimensional (2D) planar epoxy slide. Furthermore, the sensitivity of the P(GMA-HEMA) brush-based microarray on rabbit antihuman IgG antibody detection was much higher than that of its 2D counterpart. The enzyme activities of MMPs were determined specifically with a low detection limit of 6.0 pg mL(-1) for MMP-2 and 5.7 pg mL(-1) for MMP-9. By taking advantage of the biocompatibility of PHEMA, the P(GMA-HEMA) brush-based peptide microarray was also employed to evaluate the secretion of MMP-2 and MMP-9 by cells cultured off the chip or directly on the chip, and satisfactory results were obtained.

  9. Further studies into the photodissociation pathways of 2-bromo-2-nitropropane and the dissociation channels of the 2-nitro-2-propyl radical intermediate.

    PubMed

    Booth, Ryan S; Brynteson, Matthew D; Lee, Shih-Huang; Lin, J J; Butler, Laurie J

    2014-07-01

    These experiments investigate the decomposition mechanisms of geminal dinitro energetic materials by photolytically generating two key intermediates: 2-nitropropene and 2-nitro-2-propyl radicals. To characterize the unimolecular dissociation of each intermediate, we form them under collision-free conditions using the photodissociation of 2-bromo-2-nitropropane; the intermediates are formed at high internal energies and undergo a multitude of subsequent unimolecular dissociation events investigated herein. Complementing our prior work on this system, the new data obtained with a crossed-laser molecular beam scattering apparatus with VUV photoionization detection at Taiwan's National Synchrotron Radiation Research Center (NSRRC) and new velocity map imaging data better characterize two of the four primary 193 nm photodissociation channels. The C-Br photofission channel forming the 2-nitro-2-propyl radicals has a trimodal recoil kinetic energy distribution, P(ET), suggesting that the 2-nitro-2-propyl radicals are formed both in the ground electronic state and in two low-lying excited electronic states. The new data also revise the HBr photoelimination P(ET) forming the 2-nitropropene intermediate. We then resolved the multiple competing unimolecular dissociation channels of each photoproduct, confirming many of the channels detected in the prior study, but not all. The new data detected HONO product at m/e = 47 using 11.3 eV photoionization from both intermediates; analysis of the momentum-matched products allows us to establish that both 2-nitro-2-propyl → HONO + CH3CCH2 and 2-nitropropene → HONO + C3H4 occur. Photoionization at 9.5 eV allowed us to detect the mass 71 coproduct formed in OH loss from 2-nitro-2-propyl; a channel missed in our prior study. The dynamics of the highly exothermic 2-nitro-2-propyl → NO + acetone dissociation is also better characterized; it evidences a sideways scattered angular distribution. The detection of some stable 2

  10. A study of the interaction between rhodamine 6g and hydroxy propyl β-cyclodextrin by steady state fluorescence

    NASA Astrophysics Data System (ADS)

    Bakkialakshmi, S.; menaka, T.

    2011-10-01

    The binding of rhodamine 6G and hydroxy propyl β-cyclodextrin (Hβ-CD) was investigated measuring fluorescence and absorption at pH 7.0. The solid inclusion complex of Rh6G and Hβ-CD has been studied by Ultraviolet (UV) spectroscopy, Fluorimetry, Fourier Transform Infrared (FTIR), 1H Nuclear Magnetic Resonance ( 1HNMR) and in the Scanning Electron Microscope (SEM). Association constant Kg and Ke were determined by the enhancement of the fluorescence of rhodamine 6G in the presence of Hβ-CD. Fluorescence of Rh6G is generally enhanced, in complexes of Rh6G and β-Cyclodextrin in aqueous solutions. The free energy change for the ground state (Δ Gg) and for the excited state (Δ Ge) have also been determined. The experimental results indicated that the inclusion process is an exothermic and spontaneous.

  11. A study of the interaction between rhodamine 6g and hydroxy propyl β-cyclodextrin by steady state fluorescence.

    PubMed

    Bakkialakshmi, S; Menaka, T

    2011-10-15

    The binding of rhodamine 6G and hydroxy propyl β-cyclodextrin (Hβ-CD) was investigated measuring fluorescence and absorption at pH 7.0. The solid inclusion complex of Rh6G and Hβ-CD has been studied by Ultraviolet (UV) spectroscopy, Fluorimetry, Fourier Transform Infrared (FTIR), (1)H Nuclear Magnetic Resonance ((1)HNMR) and in the Scanning Electron Microscope (SEM). Association constant K(g) and K(e) were determined by the enhancement of the fluorescence of rhodamine 6G in the presence of Hβ-CD. Fluorescence of Rh6G is generally enhanced, in complexes of Rh6G and β-Cyclodextrin in aqueous solutions. The free energy change for the ground state (ΔG(g)) and for the excited state (ΔG(e)) have also been determined. The experimental results indicated that the inclusion process is an exothermic and spontaneous.

  12. Crystal structure of 2-[2-(hy-droxy-imino)-1-phenyl-propyl-idene]-N-phen-ylhydrazinecarbo-thio-amide.

    PubMed

    Anderson, Brian J; Freedman, Michael B; Millikan, Sean P; Smolenski, Victoria A; Jasinski, Jerry P

    2015-10-01

    In the title compound, C16H16N4OS, an intra-molecular C-H⋯S hydrogen bond is observed. With the exception of the phenyl ring of the phenyl-propyl-idene unit, the remainder of the mol-ecule has an almost planar skeleton with an r.m.s. deviation of 0.121 (5) Å from the plane through the remaining 16 atoms. In the crystal O-H⋯N hydrogen bonds are observed between the terminal hy-droxy-imino groups, forming inverson dimers with R 2 (2)(6) graph-set motifs. Additional C-H⋯N contacts stack the dimers along [100]. While no π-π inter-actions are present, weak C-H⋯O and O-H⋯Cg inter-actions are also observed and help stabilize the crystal packing.

  13. Solvent effects on the cinnamoylation of n-propyl alcohol catalyzed by N-methylimidazole and 4-dimethylaminopyridine.

    PubMed

    Connors, K A; Eboka, C J

    1983-04-01

    The kinetics of reaction of trans-cinnamic anhydride or trans-cinnamoyl chloride with n-propyl alcohol, catalyzed by N-methylimidazole or 4-dimethylaminopyridine, were studied spectrophotometrically at 25 degrees in methyl ethyl ketone, ethylene dichloride, methylene chloride, and toluene. The acid chloride reacted in all solvents via the intermediate formation of the N-acyl catalyst, which underwent reaction with the alcohol catalyzed by another molecule of the base. The anhydride did not form the intermediate in any of the solvents, but underwent direct general base catalysis. The rate of the anhydride reactions was not sensitive to solvent polarity, whereas the rate of the chloride reactions tended to increase as the solvent polarity decreased. A kinetic analysis is given of the effect of ion-pair formation on the kinetics of acyl transfer in systems where the charged N-acyl catalyst intermediate is formed.

  14. Anharmonic modeling of the conformation-specific IR spectra of ethyl, n-propyl, and n-butylbenzene

    NASA Astrophysics Data System (ADS)

    Tabor, Daniel P.; Hewett, Daniel M.; Bocklitz, Sebastian; Korn, Joseph A.; Tomaine, Anthony J.; Ghosh, Arun K.; Zwier, Timothy S.; Sibert, Edwin L.

    2016-06-01

    Conformation-specific UV-IR double resonance spectra are presented for ethyl, n-propyl, and n-butylbenzene. With the aid of a local mode Hamiltonian that includes the effects of stretch-scissor Fermi resonance, the spectra can be accurately modeled for specific conformers. These molecules allow for further development of a first principles method for calculating alkyl stretch spectra. Across all chain lengths, certain dihedral patterns impart particular spectral motifs at the quadratic level. However, the anharmonic contributions are consistent from molecule to molecule and conformer to conformer. This transferability of anharmonicities allows for the Hamiltonian to be constructed from only a harmonic frequency calculation, reducing the cost of the model. The phenyl ring alters the frequencies of the CH2 stretches by about 15 cm-1 compared to their n-alkane counterparts in trans configurations. Conformational changes in the chain can lead to shifts in frequency of up to 30 cm-1.

  15. Convenient Synthesis of 18F-Radiolabeled R-(−)-N-n-propyl-2-(3-fluoropropanoxy-11-hydroxynoraporphine

    PubMed Central

    Sromek, Anna W.; Zhang, Shaohui; Akurathi, Vamsidar; Packard, Alan B.; Li, Wei; Alagille, David; Morley, Thomas J.; Baldwin, Ronald; Tamagnan, Gilles; Neumeyer, John L.

    2014-01-01

    Aporphines are attractive candidates for imaging D2 receptor function because, as agonists rather than antagonists, they are selective for the receptor in the high affinity state. In contrast, D2 antagonists do not distinguish between the high and low affinity states, and in vitro data suggests that this distinction may be important in studying diseases characterized by D2 dysregulation, such as schizophrenia and Parkinson’s disease. Accordingly, MCL-536 (R-(−)-N-n-propyl-2-(3-[18F]fluoropropanoxy-11-hydroxynoraporphine) was selected for labeling with 18F based on in vitro data obtained for the non-radioactive (19F) compound. Fluorine-18-labeled MCL-536 was synthesized in 70% radiochemical yield, >99% radiochemical purity and specific activity of 167 GBq/μmol (4.5 Ci/μmol) using p-toluenesulfonyl (tosyl) both as a novel protecting group for the phenol and a leaving group for the radiofluorination. PMID:25400260

  16. Propylation technique for the simultaneous determination of tetraalkyllead and ionic alkyllead species by gas chromatography/atomic absorption spectrometry

    SciTech Connect

    Radojevic, M.; Allen, A.; Rapsomanikis, S.; Harrison, R.M.

    1986-03-01

    The only technique capable of simultaneous determination of R/sub 4/Pb and ionic alkyllead compounds involves extraction into an organic solvent in the presence of sodium diethyldithiocarbamate (NaDDTC) and derivatizations of ionic species to R/sub 4/Pb forms using a butylating Grignard reagent (n-butylmagnesium chloride) followed by GC/AAS analysis. This technique has been applied to many environmental samples with some degree of success, although for many less polluted samples even greater sensitivity is required. In this communication the authors present an improved and novel derivatization technique of the simultaneous determination R/sub 4/Pb and ionic alkyllead species involving extraction into n-hexane and propylation to the tetraalkyllead form using propylmagnesium chloride with GC/electrothermal AAS analysis. The technique is compared to the previously reported butylation method, and procedures of extract concentration are investigated. 11 references, 2 figures, 1 table.

  17. Corrosion mitigation of N-(2-hydroxy-3-trimethyl ammonium)propyl chitosan chloride as inhibitor on mild steel.

    PubMed

    Sangeetha, Y; Meenakshi, S; SairamSundaram, C

    2015-01-01

    The biopolymer N-(2-hydroxy-3-trimethyl ammonium)propyl chitosan chloride (HTACC) was synthesised and its influence as a novel corrosion inhibitor on mild steel in 1M HCl was studied using gravimetric and electrochemical experiments. The compound obtained was characterised using FTIR and NMR studies. The inhibition efficiency increased with the increase in concentration and reached a maximum of 98.9% at 500 ppm concentration. Polarisation studies revealed that HTACC acts both as anodic and cathodic inhibitor. Electrochemical impedance studies confirmed that the inhibition is through adsorption on the metal surface. The extent of inhibition exhibits a negative trend with increase in temperature. Langmuir isotherm provides the best description on the adsorption nature of the inhibitor. SEM analysis indicated the presence of protective film formed by the inhibitor on the metal surface.

  18. Crystal structure of 2-[2-(hy-droxy-imino)-1-phenyl-propyl-idene]-N-phen-ylhydrazinecarbo-thio-amide.

    PubMed

    Anderson, Brian J; Freedman, Michael B; Millikan, Sean P; Smolenski, Victoria A; Jasinski, Jerry P

    2015-10-01

    In the title compound, C16H16N4OS, an intra-molecular C-H⋯S hydrogen bond is observed. With the exception of the phenyl ring of the phenyl-propyl-idene unit, the remainder of the mol-ecule has an almost planar skeleton with an r.m.s. deviation of 0.121 (5) Å from the plane through the remaining 16 atoms. In the crystal O-H⋯N hydrogen bonds are observed between the terminal hy-droxy-imino groups, forming inverson dimers with R 2 (2)(6) graph-set motifs. Additional C-H⋯N contacts stack the dimers along [100]. While no π-π inter-actions are present, weak C-H⋯O and O-H⋯Cg inter-actions are also observed and help stabilize the crystal packing. PMID:26594484

  19. Predictors of Tris(1,3-dichloro-2-propyl) phosphate Metabolite in the Urine of Office Workers

    PubMed Central

    Carignan, Courtney C.; McClean, Michael D.; Cooper, Ellen M.; Watkins, Deborah J.; Fraser, Alicia J.; Heiger-Bernays, Wendy; Stapleton, Heather M.; Webster, Thomas F.

    2013-01-01

    Tris(1,3-dichloro-2-propyl) phosphate (TDCPP) is a flame retardant widely used in furniture containing polyurethane foam. It is a carcinogen, endocrine disruptor, and potentially neurotoxic. Our objectives were to characterize exposure of adult office workers (n=29) to TDCPP by measuring its primary metabolite, bis(1,3-dichloro-2-propyl) phosphate (BDCPP), in their urine; measuring TDCPP in dust from their homes; offices and vehicles; and assessing possible predictors of exposure. We identified TDCPP in 99% of dust (GM=4.43 µg/g) and BDCPP in 100% of urine samples (GM=408 pg/mL). Concentrations of TDCPP in dust were significantly higher in vehicles (GM=12.5 µg/g) and offices (GM=6.06 µg/g) than in dust from the main living area (GM=4.21 µg/g) or bedrooms (GM=1.40 µg/g) of worker homes. Urinary BDCPP concentrations among participants who worked in a new office building were 26% of those who worked in older buildings (p=0.01). We found some evidence of a positive trend between urinary BDCPP and TDCPP in office dust that was not observed in the other microenvironments and may be related to the timing of urine sample collection during the afternoon of a workday. Overall our findings suggest that exposure to TDCPP in the work environment is one of the contributors to the personal exposure for office workers. Further research is needed to confirm specific exposure sources (e.g., polyurethane foam), determine the importance of exposure in other microenvironments such as homes and vehicles, and address the inhalation and dermal exposure pathways. PMID:23523854

  20. Design, synthesis and biological evaluation of novel benzimidazole-2-substituted phenyl or pyridine propyl ketene derivatives as antitumour agents.

    PubMed

    Wu, Lin-tao; Jiang, Zhi; Shen, Jia-jia; Yi, Hong; Zhan, Yue-chen; Sha, Ming-quan; Wang, Zhen; Xue, Si-tu; Li, Zhuo-rong

    2016-05-23

    A series of novel benzimidazole-2-subsituted phenyl or pyridine propyl ketene derivatives were designed and synthesized. The biological activities of these derivatives were then evaluated as potential antitumour agents. These compounds were assayed for growth-inhibitory activity against HCT116, MCF-7 and HepG2 cell lines in vitro. The IC50 values of compounds A1 and A7 against the cancer cells were 0.06-3.64 μM and 0.04-9.80 μM, respectively. Their antiproliferative activities were significantly better than that of 5-Fluorouracil (IC50: 56.96-174.50 μM) and were close to that of Paclitaxel (IC50: 0.026-1.53 μM). The activity of these derivatives was over 100 times more effective than other reported structures of chalcone analogues (licochalcone A). A preliminary mechanistic study suggested that these compounds inhibit p53-MDM2 binding. Compounds A1, A7 and A9 effectively inhibited tumour growth in BALB/c mice with colon carcinoma HCT116 cells. The group administered 200 mg/kg of compound A7 showed a 74.6% tumour growth inhibition with no signs of toxicity at high doses that was similar to the inhibition achieved with the 12.5 mg/kg irinotecan positive control (70.2%). Therefore, this class of benzimidazole-2-subsituted phenyl or pyridine propyl ketene derivatives represents a promising lead structure for the development of possible p53-MDM2 inhibitors as new antitumour agents. PMID:27017265

  1. Can quaternary ammonium methacrylates inhibit matrix MMPs and cathepsins?

    PubMed Central

    Tezvergil-Mutluay, Arzu; Agee, Kelli A.; Mazzoni, Annalisa; Carvalho, Ricardo M.; Carrilho, Marcela; Tersariol, Ivarne L.; Nascimento, Fabio D.; Imazato, Satoshi; Tjäderhane, Leo; Breschi, Lorenzo; Tay, Franklin R; Pashley, David H.

    2014-01-01

    Objective Dentin matrices release ICTP and CTX fragments during collagen degradation. ICTP fragments are known to be produced by MMPs. CTX fragments are thought to come from cathepsin K activity. The purpose of this study was to determine if quaternary methacrylates (QAMs) can inhibit matrix MMPs and cathepsins. Methods Dentin beams were demineralizated, and dried to constant weight. Beams were incubated with rh-cathepsin B, K, L or S for 24 h at pH 7.4 to identify which cathepsins release CTX at neutral pH. Beams were dipped in ATA, an antimicrobial QAM to determine if it can inhibit dentin matrix proteases. Other beams were dipped in another QAM (MDPB) to determine if it produced similar inhibition of dentin proteases. Results Only beams incubated with cathepsin K lost more dry mass than the controls and released CTX. Dentin beams dipped in ATA and incubated for 1 week at pH 7.4, showed a concentration-dependent reduction in weight-loss. There was no change in ICTP release from control values, meaning that ATA did not inhibit MMPs. Media concentrations of CTX fell significantly at 15 wt% ATA indicating that ATA inhibits capthesins. Beams dipped in increasing concentrations of MDPB lost progressively less mass, showing that MDPB is a protease-inhibitor. ICTP released from controls or beams exposed to low concentrations were the same, while 5 or 10% MDPB significantly lowered ICTP production. CTX levels were strongly inhibited by 2.5–10% MDPB, indicating that MDPB is a potent inhibitor of both MMPs and cathepsin K. Significance CTX seems to be released from dentin matrix only by cathepsin K. MMPs and cathepsin K and B may all contribute to matrix degradation. PMID:25467953

  2. Facile Fabrication of Gradient Surface Based on (meth)acrylate Copolymer Films

    NASA Astrophysics Data System (ADS)

    Zhang, Y.; Yang, H.; Wen, X.-F.; Cheng, J.; Xiong, J.

    2016-08-01

    This paper describes a simple and economic approach for fabrication of surface wettability gradient on poly(butyl acrylate - methyl methacrylate) [P (BA-MMA)] and poly(butyl acrylate - methyl methacrylate - 2-hydroxyethyl methacrylate) [P (BA-MMA-HEMA)] films. The (meth)acrylate copolymer [including P (BA-MMA) and P (BA-MMA-HEMA)] films are hydrolyzed in an aqueous solution of NaOH and the transformation of surface chemical composition is achieved by hydrolysis in NaOH solution. The gradient wetting properties are generated based on different functional groups on the P (BA-MMA) and P (BA-MMA-HEMA) films. The effects of both the surface chemical and surface topography on wetting of the (meth)acrylate copolymer film are discussed. Surface chemical composition along the materials length is determined by XPS, and surface topography properties of the obtained gradient surfaces are analyzed by FESEM and AFM. Water contact angle system (WCAs) results show that the P (BA-MMA-HEMA) films provide a larger slope of the gradient wetting than P (BA-MMA). Moreover, this work demonstrates that the gradient concentration of chemical composition on the poly(meth) acrylate films is owing to the hydrolysis processes of ester group, and the hydrolysis reactions that have negligible influence on the surface morphology of the poly(meth) acrylate films coated on the glass slide. The gradient wettability surfaces may find broad applications in the field of polymer coating due to the compatibility of (meth) acrylate polymer.

  3. Conversion of (Meth)acrylic acids to methane granular sludge: Initiation by specific anerobic microflora

    SciTech Connect

    Shtarkman, N.B.; Obraztova, A.Y.; Laurinavichyus, K.S.; Galushko, A.S.; Akimenko, V.K.

    1995-03-01

    The role of a specific anaerobic microflora in the initiation of degradation of (meth)acrylic acids to methane by granular sludge from a UASB reactor was investigated. Associations of anaerobic bacteria isolated from the anaerobic sludge, which was used for a long time for treatment of wastewater from (meth)acrylate production, were able to realize the initial stage of (meth)acrylic acid decomposition, i.e., a conversion of acrylic and methacrylic acids to propionic and isobutyric acids, respectively. When added to granules, these association played a role of an {open_quotes}initiator{close_quotes} of the degradation process, which was then continued by the granular sludge microflora utilizing propionate and isobutyrate. Some characteristics of the granules adapted to propionate or isobutyrate are presented. The rates of propionate and isobutyrate consumption by adapted granules is, respectively, 21 and 53 times higher than the values obtained for nonadapted granules. A combined use of {open_quotes}initiating{close_quotes} bacteria and adapted granules provided degradation of (meth)acrylic acids with a maximum methane yield. The possibility is discussed of employing the granules, which are adapted to short-chain fatty acids, and the {open_quotes}initiating{close_quotes} bacteria, which accomplish the initial steps of the organic material decomposition to lower fatty acids, for the conversion of various chemical compounds to methane. 10 refs., 3 figs., 2 tabs.

  4. Swelling equilibria for cationic 2-hydroxyethyl methacrylate (HEMA)-based hydrogels

    SciTech Connect

    Baker, J.P.; Blanch, H.W.; Prausnitz, J.M.

    1993-08-01

    Cationic HEMA-based hydrogels were synthesized by copolymerizing HEMA with [(methacrylamido)propyl]trimethylammonium chloride (MAPTAC). Swelling equilibria were measured in pure water an in aqueous sodium chloride solutions. Hydrogel swelling is an increasing function of the MAPTAC content. A Flory-type swelling model using a concentration-dependent Flory {Chi} parameter semi-qualitatively describes poly(HEMA co-MAPTAC) hydrogel swelling in aqueous sodium chloride.

  5. Influencing Factors for Organic Spill Recovery Performance with a Novel Polypropylene-Methacrylate Sorbent.

    PubMed

    Li, Shaoning; Wei, Junfu; Chen, Yuan; Cui, Li; Zhang, Yue; Dai, Zhao; Zhao, Shihuai

    2015-08-01

    Insoluble organic matter released to the water body through accidental spillage imposes serious damage on the environment. Polypropylene (PP) fiber and methacrylate resin, however, end up in certain morphology or low sorption capacity after a single use. In this study, a novel sorbent was prepared by radiation-induced graft polymerization of butyl methacrylate (BMA) onto PP fiber matrix to retain the advantages of both PP fibers and methacrylate resins to overcome the shortcomings of each used alone. The different parameters including irradiation power, irradiation time and monomer concentration that effect the grafting degree of grafted fiber were studied. The resulting grafted fibers (PP-g-BMA) were evaluated in this study in terms of sorption capacity, retention behaviors and reusability properties. The investigation revealed that the homopolymerization rate, organic matter temperature and pH values of organic-over-water aqueous solution are the most important factors in the sorption performance of polypropylene grafted fiber sorbent. PMID:26237685

  6. Effects of surfactants on the properties of mortar containing styrene/methacrylate superplasticizer.

    PubMed

    Negim, El-Sayed; Kozhamzharova, Latipa; Khatib, Jamal; Bekbayeva, Lyazzat; Williams, Craig

    2014-01-01

    The physical and mechanical properties of mortar containing synthetic cosurfactants as air entraining agent are investigated. The cosurfactants consist of a combination of 2% dodecyl benzene sodium sulfonate (DBSS) and either 1.5% polyvinyl alcohol (PVA) or 1.5% polyoxyethylene glycol monomethyl ether (POE). Also these cosurfactants were used to prepare copolymers latex: styrene/butyl methacrylate (St/BuMA), styrene/methyl methacrylate (St/MMA), and styrene/glycidyl methacrylate (St/GMA), in order to study their effects on the properties of mortar. The properties of mortar examined included flow table, W/C ratio, setting time, water absorption, compressive strength, and combined water. The results indicate that the latex causes improvement in mortar properties compared with cosurfactants. Also polymer latex containing DBSS/POE is more effective than that containing DBSS/PVA.

  7. Chondrocyte Generation of Cartilage-Like Tissue Following Photoencapsulation in Methacrylated Polysaccharide Solution Blends.

    PubMed

    Hayami, James W S; Waldman, Stephen D; Amsden, Brian G

    2016-07-01

    Chondrocyte-seeded, photo-cross-linked hydrogels prepared from solutions containing 50% mass fractions of methacrylated glycol chitosan or methacrylated hyaluronic acid (MHA) with methacrylated chondroitin sulfate (MCS) are cultured in vitro under static conditions over 35 d to assess their suitability for load-bearing soft tissue repair. The photo-cross-linked hydrogels have initial equilibrium moduli between 100 and 300 kPa, but only the MHAMCS hydrogels retain an approximately constant modulus (264 ± 5 kPa) throughout the culture period. Visually, the seeded chondrocytes in the MHAMCS hydrogels are well distributed with an apparent constant viability in culture. Multicellular aggregates are surrounded by cartilaginous matrix, which contain aggrecan and collagen II. Thus, co-cross-linked MCS and MHA hydrogels may be suited for use in an articular cartilage or nucleus pulposus repair applications. PMID:27061241

  8. Effects of Surfactants on the Properties of Mortar Containing Styrene/Methacrylate Superplasticizer

    PubMed Central

    Negim, El-Sayed; Kozhamzharova, Latipa; Khatib, Jamal; Bekbayeva, Lyazzat; Williams, Craig

    2014-01-01

    The physical and mechanical properties of mortar containing synthetic cosurfactants as air entraining agent are investigated. The cosurfactants consist of a combination of 2% dodecyl benzene sodium sulfonate (DBSS) and either 1.5% polyvinyl alcohol (PVA) or 1.5% polyoxyethylene glycol monomethyl ether (POE). Also these cosurfactants were used to prepare copolymers latex: styrene/butyl methacrylate (St/BuMA), styrene/methyl methacrylate (St/MMA), and styrene/glycidyl methacrylate (St/GMA), in order to study their effects on the properties of mortar. The properties of mortar examined included flow table, W/C ratio, setting time, water absorption, compressive strength, and combined water. The results indicate that the latex causes improvement in mortar properties compared with cosurfactants. Also polymer latex containing DBSS/POE is more effective than that containing DBSS/PVA. PMID:24955426

  9. Toughening epoxy resin with poly(methyl methacrylate)-grafted natural rubber

    SciTech Connect

    Rezaifard, A.H.; Hodd, K.A.; Barton, J.M.

    1993-12-31

    A novel rubber, poly(methyl methacrylate)-g-natural rubber (Hevea-plus MG), has been studied as a toughening agent for bisphenol A diglycidyl ether (Shell 828 epoxy resin) cured with piperidine. Effective dispersions of the rubber, in concentrations of 2-10 parts per hundred parts resin, were achieved by adjusting the solubility parameter of the epoxy to approximate that of poly(methyl methacrylate) by adding bisphenol A. The fracture energy of the rubber-modified resin was determined by compact tension tests (in the temperature range -60 to +40{degrees}C) and by Charpy impact tests. The poly(methyl methacrylate)-g-natural rubber was found to be an effective toughening agent for the epoxy resin at both low and high rates of strain. Possible fracture mechanisms are discussed. 22 refs., 16 figs., 5 tabs.

  10. Assessment of the skin sensitising potency of the lower alkyl methacrylate esters.

    PubMed

    Kimber, Ian; Pemberton, Mark A

    2014-10-01

    There is continued interest in, and imperatives for, the classification of contact allergens according to their relative skin sensitising potency. However, achieving that end can prove problematic, not least when there is an apparent lack of concordance between experimental assessments of potency and the prevalence allergic contact dermatitis as judged by clinical experience. For the purpose of exploring this issue, and illustrating the important considerations that are required to reach sound judgements about potency categorisation, the lower alkyl methacrylate esters (LAM) have been employed here as a case study. Although the sensitising potential of methyl methacrylate (MMA) has been reviewed previously, there is available new information that is relevant for assessment of skin sensitising potency. Moreover, for the purposes of this article, analyses have been extended to include also other LAM for which relevant data are available: ethyl methacrylate (EMA), n-butyl methacrylate (nBMA), isobutyl methacrylate (iBMA), and 2-ethylhexyl methacrylate (EHMA). In addressing the skin sensitising activity of these chemicals and in drawing conclusions regarding relative potency, a number of sources of information has been considered, including estimates of potency derived from local lymph node assay (LLNA) data, the results of guinea pig assays, and data derived from in silico methods and from recently developed in vitro approaches. Moreover, clinical experience of skin sensitisation of humans by LAM has also been evaluated. The conclusion drawn is that MMA and other LAM are contact allergens, but that none of these chemicals has any more than weak skin sensitising potency. We have also explored here the possible bases for this modest sensitising activity. Finally, the nature of exposure to LAM has been reviewed briefly and on the basis of that information, together with an understanding of skin sensitising potency, a risk assessment has been prepared. PMID:24956587

  11. Polymer-induced fractal patterns of [60]fullerene containing poly(methacrylic acid) in salt solutions.

    PubMed

    Tan, Chung How; Ravi, Palaniswamy; Dai, Sheng; Tam, Kam Chiu

    2004-11-01

    Well-defined water-soluble pH-responsive [60]fullerene (C60) containing poly(methacrylic acid) (PMAA-b-C60) was synthesized using the atom transfer radical polymerization technique. By varying pH and salt concentration, different types of fractal patterns at nano- to microscopic dimensions were observed for negatively charged PMAA-b-C60, while such structure was not observed for positively charged poly(2-dimethylaminoethyl methacrylate)-b-C60. We demonstrated that negatively charged fullerene containing polymeric systems can serve as excellent nanotemplates for the controlled growth of inorganic crystals at the nano- to micrometer length scale, and the possible mechanism was proposed.

  12. Synthesis and characterization of carbon fibers functionalized with poly (glycidyl methacrylate) via atom transfer radical polymerization

    NASA Astrophysics Data System (ADS)

    Wu, Yongwei; Xiong, Lei; Qin, Xiaokang; Wang, Zhengyue; Ding, Bei; Ren, Huan; Pi, Xiaolong

    2015-07-01

    In this work, polyacrylonitrile (PAN)-based carbon fibers (CF) were chemically modified with poly (glycidyl methacrylate) (PGMA) via atom transfer radical polymerization (ATRP) to improve the interaction between the CF and polymer matrix. The FT-IR, TGA, and XPS were used to determine the chemical structure of the resulting products and the quantities of PGMA chains grafted from the CF surface. The experimental results confirm that the CF surface was functionalized and glycidyl methacrylate was graft-polymerized onto the CF, and the grafting content of polymer could reach 10.2%.

  13. Synthesis and physicochemical properties of organofluorine esters of acrylic, methacrylic, and maleic acids

    SciTech Connect

    Gol'din, G.S.; Averbakh, K.O.; Lavygin, I.A.; Nekrasova, L.A.

    1985-12-01

    The authors synthesize and study the physicochemical properties of organofluorine acrylates, methacrylates, and maleates. The organofluorine esters are colorless liquids; their composition and structure were confirmed by elemental analysis and IR spectra. The results of studies of the dependence of the density, surface tension, and viscosity of these compounds on temperature are presented. The results revealed the influence of the length of the fluorocarbon chain on the combination of the physicochemical properties of organofluorine acrylates, methacrylates, and maleates, and also provided a method for estimating certain thermophysical characteristics of such compounds without recourse to experimental measurements.

  14. pH-sensitive methacrylic copolymer gels and the production thereof

    DOEpatents

    Mallapragada, Surya K.; Anderson, Brian C.

    2007-05-15

    The present invention provides novel gel forming methacrylic blocking copolymers that exhibit cationic pH-sensitive behavior as well as good water solubility. The copolymers are constructed by polymerization of a tertiary amine methacrylate with either a (poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide) polymer, such as the commercially available Pluronic.RTM. polymers, or a poly(ethylene glycol)methyl ether polymer. The polymers may be used for drug and gene delivery, protein separation, as structural supplements, and more.

  15. NTP Carcinogenesis Bioassay of Propyl Gallate (CAS No. 121-79-9) in F344/N Rats and B6C3F1 Mice (Feed Study).

    PubMed

    1982-12-01

    Propyl gallate is a white to nearly white odorless powder having a slightly bitter taste. Solutions of propyl gallate turn dark in the presence of iron or iron salts. Propyl gallate has been used since 1948 as an antioxidant to stabilize cosmetics, food packaging materials, and foods containing fats. As an additive, it may be found in edible fats, oils, mayonnaise, shortening, baked goods, candy, dried meat, fresh pork sausage, and dried milk, and it is used in hair grooming products, pressure-sensitive adhesives, lubricating oil additives, and transforming oils. A NTP Carcinogenesis bioassay of propyl gallate was conducted by feeding diets containing 6,000 or 12,000 ppm propyl gallate to groups of 50 F344/N rats and 50 B6C3F1 mice of each sex for 103 weeks. Groups of 50 untreated rats and 50 untreated mice of each sex served as controls. Survival of rats and mice was not adversely affected by propyl gallate, but mean body weights of dosed rats and mice of each sex were lower than those of the controls. At 104 weeks, mean body weights of low-and high-dose rats were 4% and 8% lower than those of the controls for males and 11% and 19% lower than those of the controls for females. Similarly, mean body weights of low-and high-dose mice were 5% and 8% lower than those of the controls for males and 11% (both dose groups) lower than those of the controls for females. Thyroid follicular-cell adenomas or carcinomas (combined) occurred in male rats with a statistically significant (P<0.05) positive trend, but the incidences in the dosed groups were not statistically significant in direct comparisons with the control groups. Moreover, the incidence of high-dose male rats with follicular-cell tumors (3/50, 6%) was not statistically different from the historical control rate (14/584, 2.4%) for the laboratory that conducted this bioassay. Rare tumors (an astrocytoma or a glioma) were found in the brains of two low-dose female rats. The incidence of all brain tumors in the

  16. Reactive Poly(Amic Acid)/ Poly(Glycidyl Methacrylate-r-Poly(ethylene Glycol) Methyl Ether Methacrylate) Blends as Gas Permeation Membranes

    NASA Astrophysics Data System (ADS)

    Beaulieu, Michael; Watkins, James

    2012-02-01

    Polymers containing polar moieties, such as ether groups show an affinity for acidic gases, such as CO2 due to dipole-quadrapole interactions. Polymer blends in which one of the components is poly(ethylene glycol) (PEG) have been studied extensively in literature as a CO2/light gas permeation membrane, but due to the crystallization and poor mechanical properties have been difficult to incorporate PEG above 60wt%. In this study, a series of random copolymers containing both glycidyl methacrylate and poly(ethylene glycol) methyl ether methacrylate in different ratios are blended with a poly(amic acid) prepolymer made from 4, 4'-oxydianiline and pyromellitic dianhydride to create gas permeation membranes. By using a reactive blend PEG loadings above 70% have been realized with sufficient mechanical properties, and since the side chain on the PEGMA is short these blends do not suffer from crystallization.

  17. Molecularly imprinted films of acrylonitrile/methyl methacrylate/acrylic acid terpolymers: influence of methyl methacrylate in the binding performance of L-ephedrine imprinted films.

    PubMed

    Brisbane, Carrie; McCluskey, Adam; Bowyer, Michael; Holdsworth, Clovia I

    2013-05-01

    Molecularly imprinted polymeric films (MIPFs) highly selective to 1R,2S(-)ephedrine (L-ephedrine, EPD) were produced by phase inversion post-polymerization imprinting on poly(acrylonitrile-co-methyl methacrylate-co-acrylic acid) (PAMA) terpolymers. The inclusion of methyl methacrylate (MMA) to the polymer formulation resulted in enhanced EPD selectivity which appears to be dictated by polymer composition to achieve the necessary balance between polymer rigidity and porosity. Substitution of MMA with methyl acrylate, ethyl acrylate and n-butyl acrylate resulted in a loss of EPD selectivity and EPD entrapment within the polymer matrix not observed in PAMA MIPFs. MMA, by virtue of its methyl group, is able to provide the scaffolding and rigidity necessary for stability and preservation of imprinted cavities within the PAMA MIPF leading to high EPD selectivity.

  18. Nanoscale chemical interaction enhances the physical properties of bioglass composites.

    PubMed

    Ravarian, Roya; Zhong, Xia; Barbeck, Mike; Ghanaati, Shahram; Kirkpatrick, Charles James; Murphy, Ciara M; Schindeler, Aaron; Chrzanowski, Wojciech; Dehghani, Fariba

    2013-10-22

    Bioglasses are favorable biomaterials for bone tissue engineering; however, their applications are limited due to their brittleness. In addition, the early failure in the interface is a common problem of composites of bioglass and a polymer with high mechanical strength. This effect is due to the phase separation, nonhomogeneous mixture, nonuniform mechanical strength, and different degradation properties of two compounds. To address these issues, in this study a nanoscale interaction between poly(methyl methacrylate) (PMMA) and bioactive glass was formed via silane coupling agent (3-trimethoxysilyl)propyl methacrylate (MPMA). A monolith was produced at optimum composition from this hybrid by the sol-gel method at 50 °C with a rapid gelation time (<50 min) that possessed superior physicochemical properties compared to pure bioglass and physical mixture. For instance, the Young's modulus of bioglass was decreased 40-fold and the dissolution rate of silica was retarded 1.5-fold by integration of PMMA. Prolonged dissolution of silica fosters bone integration due to the continuous dissolution of bioactive silica. The primary osteoblast cells were well anchored and cell migration was observed on the surface of the hybrid. The in vivo studies in mice demonstrated that the integrity of the hybrids was maintained in subcutaneous implantation. They induced mainly a mononuclear phagocytic tissue reaction with a low level of inflammation, while bioglass provoked a tissue reaction with TRAP-positive multinucleated giant cells. These results demonstrated that the presence of a nanoscale interaction between bioglass and PMMA affects the properties of bioglass and broadens its potential applications for bone replacement.

  19. A Comparative Study on Graphene Oxide and Carbon Nanotube Reinforcement of PMMA-Siloxane-Silica Anticorrosive Coatings.

    PubMed

    Harb, Samarah V; Pulcinelli, Sandra H; Santilli, Celso V; Knowles, Kevin M; Hammer, Peter

    2016-06-29

    Carbon nanotubes (CNTs) and graphene oxide (GO) have been used to reinforce PMMA-siloxane-silica nanocomposites considered to be promising candidates for environmentally compliant anticorrosive coatings. The organic-inorganic hybrids were prepared by benzoyl peroxide (BPO)-induced polymerization of methyl methacrylate (MMA) covalently bonded through 3-(trimethoxysilyl)propyl methacrylate (MPTS) to silica domains formed by hydrolytic condensation of tetraethoxysilane (TEOS). Single-walled carbon nanotubes and graphene oxide nanosheets were dispersed by surfactant addition and in a water/ethanol solution, respectively. These were added to PMMA-siloxane-silica hybrids at a carbon (CNT or GO) to silicon (TEOS and MPTS) molar ratio of 0.05% in two different matrices, both prepared at BPO/MMA molar ratios of 0.01 and 0.05. Atomic force microscopy and scanning electron microscopy showed very smooth, homogeneous, and defect-free surfaces of approximately 3-7 μm thick coatings deposited onto A1020 carbon steel by dip coating. Mechanical testing and thermogravimetric analysis confirmed that both additives CNT and GO improved the scratch resistance, adhesion, wear resistance, and thermal stability of PMMA-siloxane-silica coatings. Results of electrochemical impedance spectroscopy in 3.5% NaCl solution, discussed in terms of equivalent circuits, showed that the reinforced hybrid coatings act as a very efficient anticorrosive barrier with an impedance modulus up to 1 GΩ cm(2), approximately 5 orders of magnitude higher than that of bare carbon steel. In the case of GO addition, the high corrosion resistance was maintained for more than 6 months in saline medium. These results suggest that both carbon nanostructures can be used as structural reinforcement agents, improving the thermal and mechanical resistance of high performance anticorrosive PMMA-siloxane-silica coatings and thus extending their application range to abrasive environments.

  20. A Comparative Study on Graphene Oxide and Carbon Nanotube Reinforcement of PMMA-Siloxane-Silica Anticorrosive Coatings.

    PubMed

    Harb, Samarah V; Pulcinelli, Sandra H; Santilli, Celso V; Knowles, Kevin M; Hammer, Peter

    2016-06-29

    Carbon nanotubes (CNTs) and graphene oxide (GO) have been used to reinforce PMMA-siloxane-silica nanocomposites considered to be promising candidates for environmentally compliant anticorrosive coatings. The organic-inorganic hybrids were prepared by benzoyl peroxide (BPO)-induced polymerization of methyl methacrylate (MMA) covalently bonded through 3-(trimethoxysilyl)propyl methacrylate (MPTS) to silica domains formed by hydrolytic condensation of tetraethoxysilane (TEOS). Single-walled carbon nanotubes and graphene oxide nanosheets were dispersed by surfactant addition and in a water/ethanol solution, respectively. These were added to PMMA-siloxane-silica hybrids at a carbon (CNT or GO) to silicon (TEOS and MPTS) molar ratio of 0.05% in two different matrices, both prepared at BPO/MMA molar ratios of 0.01 and 0.05. Atomic force microscopy and scanning electron microscopy showed very smooth, homogeneous, and defect-free surfaces of approximately 3-7 μm thick coatings deposited onto A1020 carbon steel by dip coating. Mechanical testing and thermogravimetric analysis confirmed that both additives CNT and GO improved the scratch resistance, adhesion, wear resistance, and thermal stability of PMMA-siloxane-silica coatings. Results of electrochemical impedance spectroscopy in 3.5% NaCl solution, discussed in terms of equivalent circuits, showed that the reinforced hybrid coatings act as a very efficient anticorrosive barrier with an impedance modulus up to 1 GΩ cm(2), approximately 5 orders of magnitude higher than that of bare carbon steel. In the case of GO addition, the high corrosion resistance was maintained for more than 6 months in saline medium. These results suggest that both carbon nanostructures can be used as structural reinforcement agents, improving the thermal and mechanical resistance of high performance anticorrosive PMMA-siloxane-silica coatings and thus extending their application range to abrasive environments. PMID:27266403

  1. Sensitized chemiluminescence of 2-phenyl-4,5-di(2-furyl)-1H-imidazole/K₃Fe(CN)₆/propyl gallate system combining with solid-phase extraction for the determination of propyl gallate in edible oil.

    PubMed

    Kang, Jing; Han, Lu; Chen, Zhonglin; Shen, Jimin; Nan, Jun; Zhang, Yihua

    2014-09-15

    In this paper, a novel chemiluminescence (CL) method has been developed for the determination of propyl gallate (PG). The proposed method was based on the enhancing effect of PG on the CL signal of 2-phenyl-4,5-di(2-furyl)-1H-imidazole (PDFI) and K3Fe(CN)6 reaction in an alkaline solution. Under the optimum conditions, the enhanced CL intensity was linearly related to the concentration of PG. The linear range of the calibration curve was 0.05-8 μg/mL, and the corresponding detection limit (3σ) was 0.036 μg/mL. The relative standard deviation for determining 1.0 μg/mL PG was 2.8% (n=11). The proposed method has been successfully applied to the determination of PG in edible oil. The edible oil samples were prepared by the solid-phase extraction (SPE) with a C18 column served as the stationary phase. Furthermore, the possible CL mechanism was also discussed briefly based on the photoluminescence (PL) and CL spectra.

  2. Phenolic acid derivatives with potential anticancer properties--a structure-activity relationship study. Part 1: methyl, propyl and octyl esters of caffeic and gallic acids.

    PubMed

    Fiuza, S M; Gomes, C; Teixeira, L J; Girão da Cruz, M T; Cordeiro, M N D S; Milhazes, N; Borges, F; Marques, M P M

    2004-07-01

    The antiproliferative and cytotoxic properties of polyphenolic acid derivatives, structurally related with the natural models caffeic and gallic acids, have been tested in human cervix adenocarcinoma cells (HeLa). Simultaneous structural information was obtained for these compounds through theoretical ab initio methods. This study was conducted for the following esters: methyl caffeate (MC, 1), propyl caffeate (PC, 2), octyl caffeate (OC, 3), methyl gallate (MG, 4), propyl gallate (PG, 5) and octyl gallate (OG, 6). A significant growth-inhibition effect was assessed for some of these compounds, clearly dependent on their structural characteristics. Marked structure-activity relationships (SARs)--namely the number of hydroxyl ring substituents--were found to rule the biological effect of such systems.

  3. Assignment of Milk Fat Fatty Acid Propyl Esters by GC-FID Analysis with the Aid of Ag-ion Solid-phase Extraction.

    PubMed

    Sasaki, Ryo; Umezawa, Masatoshi; Tsukahara, Satoru; Ishiguro, Takashi; Sato, Shinichi; Watanabe, Yomi

    2015-01-01

    The recovery of short-chain fatty acids (FAs) in milk fat (MF) is improved when the analysis of the FA composition of MF by gas chromatography (GC) is conducted with the propyl or butyl ester derivatives, instead of the methyl esters. However, this approach complicates the detection of minor FAs, such as the minor positional isomers of 16:1, which represent <0.2% of the total content. In addition, the standards of these minor esters are not commercially available. In this study, with the aim to identify minor FAs, the fatty acid propyl esters (FAPEs) of MF were fractionated by Ag-ion solid phase extraction (Ag(+)-SPE) and analyzed by GC using a DB-23 capillary column. FAPEs were successfully fractionated mainly according to the degree of unsaturation by adjusting the elution conditions of the Ag(+)-SPE, and the minor FAPEs were easily determined without the aid of standard compounds. For example, by comparison of the GC profile of the saturated Ag(+)-SPE fraction with that of the original MF, minor FAs, such as iso-, anteiso-, and saturated FAs of 15:0 and 17:0, were expected to be eluted in this order. In addition, 16:1 propyl ester was co-eluted with iso 17:0 propyl ester under the GC conditions used in this study, as confirmed by the detection of the corresponding molecular ions (296 and 312, respectively) by GC-MS. Moreover, 9c,11t-conjugated linoleic acid was found to elute between 18:3 and 20:0. To the best of our knowledge, this is the first report suggesting that the peak observed before that of cis-12:1 corresponds to trans-12:1. In conclusion, Ag(+)-SPE fractionation of FAPEs contributed to the identification of minor FAs in MF without the use of standard compounds.

  4. Complete Genome Sequence of Aneurinibacillus migulanus E1, a Gramicidin S- and d-Phenylalanyl-l-Propyl Diketopiperazine-Deficient Mutant

    PubMed Central

    Alenezi, Faizah N.; Luptakova, Lenka; Rateb, Mostafa E.; Woodward, Steve

    2015-01-01

    We report here the complete genome sequence of the Aneurinibacillus migulanus E1 mutant deficient in gramicidin S (GS) and d-phenylalanyl-l-propyl diketopiperazine (DKP) formation. The genome consists of a circular chromosome (6,301,904 bp, 43.20% G+C content) without any plasmid. The complete genome sequence enables further investigation of the biosynthetic mechanism and the biological function of gramicidin S. PMID:26679577

  5. RATE CONSTANTS FOR THE REACTIONS OF OH RADICALS AND CL ATOMS WITH DI-N-PROPYL ETHER AND DI-N-BUTYL ETHER AND THEIR DEUTERATED ANALOGS. (R825252)

    EPA Science Inventory

    Using relative rate methods, rate constants for the gas-phase reactions of OH radicals and Cl atoms with di-n-propyl ether, di-n-propyl ether-d14, di-n-butyl ether and di-n-butyl ether-d18 have been measured at 296 ? 2 K and atmos...

  6. Genotoxicity assessment of propyl thiosulfinate oxide, an organosulfur compound from Allium extract, intended to food active packaging.

    PubMed

    Mellado-García, P; Maisanaba, S; Puerto, M; Llana-Ruiz-Cabello, M; Prieto, A I; Marcos, R; Pichardo, S; Cameán, A M

    2015-12-01

    Essential oils from onion (Allium cepa L.), garlic (Allium sativum L.), and their main components, such as propyl thiosulfinate oxide (PTSO) are being intended for active packaging with the purpose of maintaining and extending food product quality and shelf life. The present work aims to assess for the first time the potential mutagenicity/genotoxicity of PTSO (0-50 µM) using the following battery of genotoxicity tests: (1) the bacterial reverse-mutation assay in Salmonella typhimurium (Ames test, OECD 471); (2) the micronucleus test (OECD 487) (MN) and (3) the mouse lymphoma thymidine-kinase assay (OECD 476) (MLA) on L5178YTk(+/-), cells; and (4) the comet assay (with and without Endo III and FPG enzymes) on Caco-2 cells. The results revealed that PTSO was not mutagenic in the Ames test, however it was mutagenic in the MLA assay after 24 h of treatment (2.5-20 µM). The parent compound did not induce MN on mammalian cells; however, its metabolites (in the presence S9) produced positive results (from 15 µM). Data from the comet assay indicated that PTSO did not induce DNA breaks or oxidative DNA damage. Further in vivo genotoxicity tests are needed to confirm its safety before it is used as active additive in food packaging.

  7. Genotoxicity assessment of propyl thiosulfinate oxide, an organosulfur compound from Allium extract, intended to food active packaging.

    PubMed

    Mellado-García, P; Maisanaba, S; Puerto, M; Llana-Ruiz-Cabello, M; Prieto, A I; Marcos, R; Pichardo, S; Cameán, A M

    2015-12-01

    Essential oils from onion (Allium cepa L.), garlic (Allium sativum L.), and their main components, such as propyl thiosulfinate oxide (PTSO) are being intended for active packaging with the purpose of maintaining and extending food product quality and shelf life. The present work aims to assess for the first time the potential mutagenicity/genotoxicity of PTSO (0-50 µM) using the following battery of genotoxicity tests: (1) the bacterial reverse-mutation assay in Salmonella typhimurium (Ames test, OECD 471); (2) the micronucleus test (OECD 487) (MN) and (3) the mouse lymphoma thymidine-kinase assay (OECD 476) (MLA) on L5178YTk(+/-), cells; and (4) the comet assay (with and without Endo III and FPG enzymes) on Caco-2 cells. The results revealed that PTSO was not mutagenic in the Ames test, however it was mutagenic in the MLA assay after 24 h of treatment (2.5-20 µM). The parent compound did not induce MN on mammalian cells; however, its metabolites (in the presence S9) produced positive results (from 15 µM). Data from the comet assay indicated that PTSO did not induce DNA breaks or oxidative DNA damage. Further in vivo genotoxicity tests are needed to confirm its safety before it is used as active additive in food packaging. PMID:26607106

  8. Effects of Tris(1,3-dichloro-2-propyl) Phosphate (TDCPP) in Tetrahymena Thermophila: Targeting the Ribosome.

    PubMed

    Li, Jing; Giesy, John P; Yu, Liqin; Li, Guangyu; Liu, Chunsheng

    2015-05-21

    Tris(1,3-dichloro-2-propyl) phosphate (TDCPP) has been frequently detected in the environment, and exposure to TDCPP appears widespread. It has been implicated to cause toxicity in vertebrates, but its potential to affect lower-trophic-level species remains unknown. In the present study, the ciliated protozoan, Tetrahymena thermophila, was used as a model to evaluate toxic effects of TDCPP and explore molecular mechanisms by integrating phenotypic observation, RNA-Seq and transmission electron microscopy (TEM) Imaging technologies. Exposure to 0.01, 0.1 or 1 μM TDCPP for 5 days significantly decreased the relative biomass by reducing number of cells, size of cells and quantity of cilia in a dose-dependent manner. RNA-Seq analysis demonstrated that expression of twenty-one ribosome protein genes was down-regulated and these genes were enriched in "ribosome" term in KEGG pathway analysis. Furthermore, down-regulation of genes expressing ribosome proteins was accompanied by decreased ribosome quantity in rough endoplasmic reticulum and cytoplasm and enlarged ribosome size. Therefore, taken together, the data from the present study suggest that exposure to TDCPP affects growth and reproduction of Tetrahymena thermophila by targeting the ribosome. This information might provide insights into critical mechanisms of toxic action in other species and lead to useful bioindicators of exposure to TDCPP.

  9. Effects of Tris(1,3-dichloro-2-propyl) Phosphate (TDCPP) in Tetrahymena Thermophila: Targeting the Ribosome

    NASA Astrophysics Data System (ADS)

    Li, Jing; Giesy, John P.; Yu, Liqin; Li, Guangyu; Liu, Chunsheng

    2015-05-01

    Tris(1,3-dichloro-2-propyl) phosphate (TDCPP) has been frequently detected in the environment, and exposure to TDCPP appears widespread. It has been implicated to cause toxicity in vertebrates, but its potential to affect lower-trophic-level species remains unknown. In the present study, the ciliated protozoan, Tetrahymena thermophila, was used as a model to evaluate toxic effects of TDCPP and explore molecular mechanisms by integrating phenotypic observation, RNA-Seq and transmission electron microscopy (TEM) Imaging technologies. Exposure to 0.01, 0.1 or 1 μM TDCPP for 5 days significantly decreased the relative biomass by reducing number of cells, size of cells and quantity of cilia in a dose-dependent manner. RNA-Seq analysis demonstrated that expression of twenty-one ribosome protein genes was down-regulated and these genes were enriched in “ribosome” term in KEGG pathway analysis. Furthermore, down-regulation of genes expressing ribosome proteins was accompanied by decreased ribosome quantity in rough endoplasmic reticulum and cytoplasm and enlarged ribosome size. Therefore, taken together, the data from the present study suggest that exposure to TDCPP affects growth and reproduction of Tetrahymena thermophila by targeting the ribosome. This information might provide insights into critical mechanisms of toxic action in other species and lead to useful bioindicators of exposure to TDCPP.

  10. Synthesis and characterization of N-(2-hydroxy)propyl-3-trimethyl ammonium chitosan chloride for potential application in gene delivery.

    PubMed

    Xiao, Bo; Wan, Ying; Wang, Xiaoyu; Zha, Qichen; Liu, Haoming; Qiu, Zhiye; Zhang, Shengmin

    2012-03-01

    A series of N-(2-hydroxy)propyl-3-trimethyl ammonium chitosan chloride (HTCC) samples with various degrees of quaternization ranging from 12.4 to 43.7% was synthesized. The structures and properties of HTCC were investigated by FT-IR, (1)H NMR, conductometric titration and XRD analysis. It was found that HTCC had a more amorphous structure than chitosan. HTCC samples showed significantly lower cytotoxicity than polyethyleneimine in HepG2 and HeLa cell lines. The samples spontaneously formed complexes with pGL3 luciferase plasmid. These complexes had desirable particle sizes (160-300 nm) and zeta potentials (10.8-18.7 mV) when the weight ratios of HTCC to plasmid altered in the range of 3:1-20:1. In vitro gene transfection results indicated that HTCC had significantly high transfection efficiency compared with chitosan for delivering pGL3 luciferase plasmid to HeLa cells. The results suggest that HTCC could be a promising non-viral vector for safe and efficient DNA delivery.

  11. Characterization of bioimprinted tannase and its kinetic and thermodynamics properties in synthesis of propyl gallate by transesterification in anhydrous medium.

    PubMed

    Nie, Guangjun; Zheng, Zhiming; Gong, Guohong; Zhao, Genhai; Liu, Yan; Song, Junying; Dai, Jun

    2012-08-01

    Tannase has been extensively applied to synthesize gallic acid esters. Bioimprinting technique can evidently enhance transesterification-catalyzing performance of tannase. In order to promote the practical utilization of the modified tannase, a few enzymatic characteristics of the enzyme and its kinetic and thermodynamics properties in synthesis of propyl gallate by transesterification in anhydrous medium have been studied. The investigations of pH and temperature found that the imprinted tannase holds an optimum activity at pH 5.0 and 40 °C. On the other hand, the bioimprinting technique has a profound enhancing effect on the adapted tannase in substrate affinity and thermostability. The kinetic and thermodynamic analyses showed that the modified tannase has a longer half-time of 1,710 h at 40 °C; the kinetic constants, the activation energy of reversible thermal inactivation, and the activation energy of irreversible thermal inactivation, respectively, are 0.054 mM, 17.35 kJ mol(-1), and 85.54 kJ mol(-1) with tannic acid as a substrate at 40 °C; the free energy of Gibbs (ΔG) and enthalpy (ΔH) were found to be 97.1 and 82.9 kJ mol(-1) separately under the same conditions.

  12. Evaluation of poly{-N-isopropylacrylamide-co-[3-(methacryloylamino)propyl]trimethylammonium} as a stationary phase for capillary electrochromatography.

    PubMed

    Zhang, Xin; Colón, Luis A

    2006-03-01

    A cationic polyacrylamide-based stationary phase was synthesized and characterized for CEC. The stationary phase was prepared by radical copolymerization of N-isopropylacrylamide (NIPAAm) and (3-(methacryloylamino)propyl)trimethylammonium chloride (MAPTA), producing a copolymer attached to 5 microm porous silica particles. Fourier transform infrared spectroscopy and thermogravimetric analysis were used to characterize the copolymer. Under capillary electrochromatographic conditions, the poly-NIPAAm-co-MAPTA stationary phase showed to be stable in a wide pH range. The amino groups in the MAPTA provided an anodic EOF for CEC separation. The electroosmotic mobility changed less than 10% when the pH of the mobile phase was changed from 2 to 12. The run-to-run RSD of analyte migration time was less than 1.5% (n = 3), and the RSD of peak area was less than 3% (n = 3). The day-to-day RSD for migration time was less than 2% (n = 3). The polar groups present in the stationary phase contributed to the selectivity of the phase providing for hydrophilic interactions. In the separation of a series of neutral and acidic compounds, the stationary phase shows a mixed-mode separation mechanism with both hydrophobicity and hydrophilicity contributing to the separation.

  13. No synergism between bis(propyl)-cognitin and rasagiline on protecting dopaminergic neurons in Parkinson's disease mice

    PubMed Central

    Zheng, Cheng-you; Guo, Bao-jian; Cai, Wei; Cui, Wei; Mak, Shing-hung; Wang, Yu-qiang; Lee, Simon Ming-yuen; Han, Yi-fan; Zhang, Zai-jun

    2016-01-01

    Rasagiline, a monoamine oxidase-B inhibitor, and bis(propyl)-cognitin (B3C), a novel dimer are reported to be neuroprotective. Herein, the synergistical neuroprotection produced by rasagiline and B3C was investigated in 1-methyl-4-phenyl-1,2,3,6-tetrahydropyridine (MPTP)-induced mice of Parkinsonism. By using neurobehavioural tests, high-performance liquid chromatography and western blot assay, we showed that B3C at 0.3 mg/kg, rasagiline at 0.02 mg/kg, as well as co-treatment with B3C and rasagiline prevented MPTP-induced behavioural abnormities, increased the concentrations of dopamine and its metabolites in the striatum, and up-regulated the expression of tyrosine hydroxylase in the substantia nigra. However, the neuroprotective effects of co-treatment were not significantly improved when compared with those of B3C or rasagiline alone. Collectively, we have demonstrated that B3C at 0.3 mg/kg and rasagline at 0.02 mg/kg could not produce synergistic neuroprotective effects.

  14. Propyl gallate inhibits adipogenesis by stimulating extracellular signal-related kinases in human adipose tissue-derived mesenchymal stem cells.

    PubMed

    Lee, Jeung-Eun; Kim, Jung-Min; Jang, Hyun-Jun; Lim, Se-Young; Choi, Seon-Jeong; Lee, Nan-Hee; Suh, Pann-Ghill; Choi, Ung-Kyu

    2015-04-01

    Propyl gallate (PG) used as an additive in various foods has antioxidant and anti-inflammatory effects. Although the functional roles of PG in various cell types are well characterized, it is unknown whether PG has effect on stem cell differentiation. In this study, we demonstrated that PG could inhibit adipogenic differentiation in human adipose tissue-derived mesenchymal stem cells (hAMSCs) by decreasing the accumulation of intracellular lipid droplets. In addition, PG significantly reduced the expression of adipocyte-specific markers including peroxisome proliferator-activated receptor-γ (PPAR-γ), CCAAT enhancer binding protein-α (C/EBP-α), lipoprotein lipase (LPL), and adipocyte fatty acid-binding protein 2 (aP2). PG inhibited adipogenesis in hAMSCs through extracellular regulated kinase (ERK) pathway. Decreased adipogenesis following PG treatment was recovered in response to ERK blocking. Taken together, these results suggest a novel effect of PG on adipocyte differentiation in hAMSCs, supporting a negative role of ERK1/2 pathway in adipogenic differentiation.

  15. Tris(1,3-dichloro-2-propyl)phosphate Induces Genome-Wide Hypomethylation within Early Zebrafish Embryos

    PubMed Central

    2016-01-01

    Tris(1,3-dichloro-2-propyl)phosphate (TDCIPP) is a high-production volume organophosphate-based plasticizer and flame retardant widely used within the United States. Using zebrafish as a model, the objectives of this study were to determine whether (1) TDCIPP inhibits DNA methyltransferase (DNMT) within embryonic nuclear extracts; (2) uptake of TDCIPP from 0.75 h postfertilization (hpf, 2-cell) to 2 hpf (64-cell) or 6 hpf (shield stage) leads to impacts on the early embryonic DNA methylome; and (3) TDCIPP-induced impacts on cytosine methylation are localized to CpG islands within intergenic regions. Within this study, 5-azacytidine (5-azaC, a DNMT inhibitor) was used as a positive control. Although 5-azaC significantly inhibited zebrafish DNMT, TDCIPP did not affect DNMT activity in vitro at concentrations as high as 500 μM. However, rapid embryonic uptake of 5-azaC and TDCIPP from 0.75 to 2 hpf resulted in chemical- and chromosome-specific alterations in cytosine methylation at 2 hpf. Moreover, TDCIPP exposure predominantly resulted in hypomethylation of positions outside of CpG islands and within intragenic (exon) regions of the zebrafish genome. Overall, these findings provide the foundation for monitoring DNA methylation dynamics within zebrafish as well as identifying potential associations among TDCIPP exposure, adverse health outcomes, and DNA methylation status within human populations. PMID:27574916

  16. Stability of the complex BSA-6-propyl-2-thiouracil in the presence of Gu·HCl and urea

    NASA Astrophysics Data System (ADS)

    Równicka, Joanna; Sułkowska, Anna; Pożycka, Jadwiga; Bojko, Barbara; Sułkowski, Wiesław W.

    2006-07-01

    Pathologic structure of albumin is present in blood of uremic or diabetic patients. The defective binding of albumin can cause, among others, inhibition of the metabolism of amphipathic hormones and the enhancement of the toxicity of drugs. We aim to show the alteration of the binding site of 6-propyl-2-thiouracil (PTU) in bovine serum albumin (BSA) in the presence of urea and guanidine hydrochloride. This study shows that PTU has the tendency to interact within the hydrophobic domain IIA or IB of serum albumin and to quench the fluorescence of tryptophanyl side chains by the static and collisional quenching mechanism. For the binding to the native protein, two classes of binding sites are seen. In the first one, the binding constant is equal to K bI-9.6×10 4 M -1, and in the second class, the binding constant is K bII-7.1×10 3 M -1. For the binding to the denaturated serum albumin, only one class of the binding sites can be observed. The binding constants for BSA denatured with urea and Gu·HCl are lower and are equal to 2.2×10 4 M -1 and 3.5×10 4 M -1, respectively. Evaluation of the binding ability of serum albumin is also important in case of older people because weaker drug-protein interaction can result in the increase of drug concentration in the blood serum.

  17. No synergism between bis(propyl)-cognitin and rasagiline on protecting dopaminergic neurons in Parkinson's disease mice.

    PubMed

    Zheng, Cheng-You; Guo, Bao-Jian; Cai, Wei; Cui, Wei; Mak, Shing-Hung; Wang, Yu-Qiang; Lee, Simon Ming-Yuen; Han, Yi-Fan; Zhang, Zai-Jun

    2016-08-01

    Rasagiline, a monoamine oxidase-B inhibitor, and bis(propyl)-cognitin (B3C), a novel dimer are reported to be neuroprotective. Herein, the synergistical neuroprotection produced by rasagiline and B3C was investigated in 1-methyl-4-phenyl-1,2,3,6-tetrahydropyridine (MPTP)-induced mice of Parkinsonism. By using neurobehavioural tests, high-performance liquid chromatography and western blot assay, we showed that B3C at 0.3 mg/kg, rasagiline at 0.02 mg/kg, as well as co-treatment with B3C and rasagiline prevented MPTP-induced behavioural abnormities, increased the concentrations of dopamine and its metabolites in the striatum, and up-regulated the expression of tyrosine hydroxylase in the substantia nigra. However, the neuroprotective effects of co-treatment were not significantly improved when compared with those of B3C or rasagiline alone. Collectively, we have demonstrated that B3C at 0.3 mg/kg and rasagline at 0.02 mg/kg could not produce synergistic neuroprotective effects. PMID:27651784

  18. Modeling of boldine alkaloid adsorption onto pure and propyl-sulfonic acid-modified mesoporous silicas. A comparative study.

    PubMed

    Geszke-Moritz, Małgorzata; Moritz, Michał

    2016-12-01

    The present study deals with the adsorption of boldine onto pure and propyl-sulfonic acid-functionalized SBA-15, SBA-16 and mesocellular foam (MCF) materials. Siliceous adsorbents were characterized by nitrogen sorption analysis, transmission electron microscopy (TEM), scanning electron microscopy (SEM), Fourier-transform infrared (FT-IR) spectroscopy and thermogravimetric analysis. The equilibrium adsorption data were analyzed using the Langmuir, Freundlich, Redlich-Peterson, and Temkin isotherms. Moreover, the Dubinin-Radushkevich and Dubinin-Astakhov isotherm models based on the Polanyi adsorption potential were employed. The latter was calculated using two alternative formulas including solubility-normalized (S-model) and empirical C-model. In order to find the best-fit isotherm, both linear regression and nonlinear fitting analysis were carried out. The Dubinin-Astakhov (S-model) isotherm revealed the best fit to the experimental points for adsorption of boldine onto pure mesoporous materials using both linear and nonlinear fitting analysis. Meanwhile, the process of boldine sorption onto modified silicas was described the best by the Langmuir and Temkin isotherms using linear regression and nonlinear fitting analysis, respectively. The values of adsorption energy (below 8kJ/mol) indicate the physical nature of boldine adsorption onto unmodified silicas whereas the ionic interactions seem to be the main force of alkaloid adsorption onto functionalized sorbents (energy of adsorption above 8kJ/mol).

  19. Corrosion inhibition behavior of propyl phosphonic acid-Zn2+ system for carbon steel in aqueous solution

    NASA Astrophysics Data System (ADS)

    Prabakaran, M.; Venkatesh, M.; Ramesh, S.; Periasamy, V.

    2013-07-01

    The effectiveness of propyl phosphonic acid (PPA) as a corrosion inhibitor in association with a bivalent cation like Zn2+ has been studied. An eco-friendly inhibitor in controlling corrosion of carbon steel in neutral aqueous medium in the absence and presence of Zn2+ has been evaluated by gravimetric method. Impedance studies of the metal/solution interface indicated that the surface film is highly protective against the corrosion of carbon steel in the aqueous environment. Potentiodynamic polarization studies showed that the inhibitor is a mixed inhibitor. X-ray photoelectron spectroscopic analysis (XPS) of the protective film exhibited the presence of the elements viz., iron, phosphorus, oxygen, carbon and zinc. The chemical shifts in the binding energies of these elements inferred that the surface film is composed of oxides/hydroxides of iron(III), Zn(OH)2 and [Fe(II)/(III)-Zn(II)-PPA] complex. Further, the surface analysis techniques viz., FT-IR, AFM and SEM studies confirm the formation of an adsorbed protective film on the carbon steel surface. Based on all these results, a plausible mechanism of corrosion inhibition is proposed.

  20. No synergism between bis(propyl)-cognitin and rasagiline on protecting dopaminergic neurons in Parkinson's disease mice

    PubMed Central

    Zheng, Cheng-you; Guo, Bao-jian; Cai, Wei; Cui, Wei; Mak, Shing-hung; Wang, Yu-qiang; Lee, Simon Ming-yuen; Han, Yi-fan; Zhang, Zai-jun

    2016-01-01

    Rasagiline, a monoamine oxidase-B inhibitor, and bis(propyl)-cognitin (B3C), a novel dimer are reported to be neuroprotective. Herein, the synergistical neuroprotection produced by rasagiline and B3C was investigated in 1-methyl-4-phenyl-1,2,3,6-tetrahydropyridine (MPTP)-induced mice of Parkinsonism. By using neurobehavioural tests, high-performance liquid chromatography and western blot assay, we showed that B3C at 0.3 mg/kg, rasagiline at 0.02 mg/kg, as well as co-treatment with B3C and rasagiline prevented MPTP-induced behavioural abnormities, increased the concentrations of dopamine and its metabolites in the striatum, and up-regulated the expression of tyrosine hydroxylase in the substantia nigra. However, the neuroprotective effects of co-treatment were not significantly improved when compared with those of B3C or rasagiline alone. Collectively, we have demonstrated that B3C at 0.3 mg/kg and rasagline at 0.02 mg/kg could not produce synergistic neuroprotective effects. PMID:27651784

  1. Modeling of boldine alkaloid adsorption onto pure and propyl-sulfonic acid-modified mesoporous silicas. A comparative study.

    PubMed

    Geszke-Moritz, Małgorzata; Moritz, Michał

    2016-12-01

    The present study deals with the adsorption of boldine onto pure and propyl-sulfonic acid-functionalized SBA-15, SBA-16 and mesocellular foam (MCF) materials. Siliceous adsorbents were characterized by nitrogen sorption analysis, transmission electron microscopy (TEM), scanning electron microscopy (SEM), Fourier-transform infrared (FT-IR) spectroscopy and thermogravimetric analysis. The equilibrium adsorption data were analyzed using the Langmuir, Freundlich, Redlich-Peterson, and Temkin isotherms. Moreover, the Dubinin-Radushkevich and Dubinin-Astakhov isotherm models based on the Polanyi adsorption potential were employed. The latter was calculated using two alternative formulas including solubility-normalized (S-model) and empirical C-model. In order to find the best-fit isotherm, both linear regression and nonlinear fitting analysis were carried out. The Dubinin-Astakhov (S-model) isotherm revealed the best fit to the experimental points for adsorption of boldine onto pure mesoporous materials using both linear and nonlinear fitting analysis. Meanwhile, the process of boldine sorption onto modified silicas was described the best by the Langmuir and Temkin isotherms using linear regression and nonlinear fitting analysis, respectively. The values of adsorption energy (below 8kJ/mol) indicate the physical nature of boldine adsorption onto unmodified silicas whereas the ionic interactions seem to be the main force of alkaloid adsorption onto functionalized sorbents (energy of adsorption above 8kJ/mol). PMID:27612776

  2. Effects of Tris(1,3-dichloro-2-propyl) Phosphate (TDCPP) in Tetrahymena Thermophila: Targeting the Ribosome

    PubMed Central

    Li, Jing; Giesy, John P.; Yu, Liqin; Li, Guangyu; Liu, Chunsheng

    2015-01-01

    Tris(1,3-dichloro-2-propyl) phosphate (TDCPP) has been frequently detected in the environment, and exposure to TDCPP appears widespread. It has been implicated to cause toxicity in vertebrates, but its potential to affect lower-trophic-level species remains unknown. In the present study, the ciliated protozoan, Tetrahymena thermophila, was used as a model to evaluate toxic effects of TDCPP and explore molecular mechanisms by integrating phenotypic observation, RNA-Seq and transmission electron microscopy (TEM) Imaging technologies. Exposure to 0.01, 0.1 or 1 μM TDCPP for 5 days significantly decreased the relative biomass by reducing number of cells, size of cells and quantity of cilia in a dose-dependent manner. RNA-Seq analysis demonstrated that expression of twenty-one ribosome protein genes was down-regulated and these genes were enriched in “ribosome” term in KEGG pathway analysis. Furthermore, down-regulation of genes expressing ribosome proteins was accompanied by decreased ribosome quantity in rough endoplasmic reticulum and cytoplasm and enlarged ribosome size. Therefore, taken together, the data from the present study suggest that exposure to TDCPP affects growth and reproduction of Tetrahymena thermophila by targeting the ribosome. This information might provide insights into critical mechanisms of toxic action in other species and lead to useful bioindicators of exposure to TDCPP. PMID:25994279

  3. Evaluation of poly{-N-isopropylacrylamide-co-[3-(methacryloylamino)propyl]trimethylammonium} as a stationary phase for capillary electrochromatography.

    PubMed

    Zhang, Xin; Colón, Luis A

    2006-03-01

    A cationic polyacrylamide-based stationary phase was synthesized and characterized for CEC. The stationary phase was prepared by radical copolymerization of N-isopropylacrylamide (NIPAAm) and (3-(methacryloylamino)propyl)trimethylammonium chloride (MAPTA), producing a copolymer attached to 5 microm porous silica particles. Fourier transform infrared spectroscopy and thermogravimetric analysis were used to characterize the copolymer. Under capillary electrochromatographic conditions, the poly-NIPAAm-co-MAPTA stationary phase showed to be stable in a wide pH range. The amino groups in the MAPTA provided an anodic EOF for CEC separation. The electroosmotic mobility changed less than 10% when the pH of the mobile phase was changed from 2 to 12. The run-to-run RSD of analyte migration time was less than 1.5% (n = 3), and the RSD of peak area was less than 3% (n = 3). The day-to-day RSD for migration time was less than 2% (n = 3). The polar groups present in the stationary phase contributed to the selectivity of the phase providing for hydrophilic interactions. In the separation of a series of neutral and acidic compounds, the stationary phase shows a mixed-mode separation mechanism with both hydrophobicity and hydrophilicity contributing to the separation. PMID:16523452

  4. Chest Wall Reconstruction Using a Methyl Methacrylate Neo-Rib and Mesh.

    PubMed

    Suzuki, Kei; Park, Bernard J; Adusumilli, Prasad S; Rizk, Nabil P; Huang, James; Jones, David R; Bains, Manjit S

    2015-08-01

    Prosthetic reconstruction of the chest wall after oncologic resection is performed by means of various techniques using different materials. We describe a new technique of chest wall reconstruction that includes the use of Marlex mesh and the creation of a neo-rib from a Steinmann pin and methyl methacrylate. PMID:26234861

  5. Chest Wall Reconstruction Using a Methyl Methacrylate Neo-rib and Mesh

    PubMed Central

    Suzuki, Kei; Park, Bernard J.; Adusumilli, Prasad S.; Rizk, Nabil P.; Huang, James; Jones, David R.; Bains, Manjit S.

    2016-01-01

    Prosthetic reconstruction of the chest wall after oncologic resection is performed by means of various techniques using different materials. We describe a new technique of chest wall reconstruction that includes the use of Marlex mesh and the creation of a neo-rib from a Steinmann pin and methyl methacrylate. PMID:26234861

  6. Recent Origin of the Methacrylate Redox System in Geobacter sulfurreducens AM-1 through Horizontal Gene Transfer

    PubMed Central

    Arkhipova, Oksana V.; Meer, Margarita V.; Mikoulinskaia, Galina V.; Zakharova, Marina V.; Galushko, Alexander S.; Kondrashov, Fyodor A.

    2015-01-01

    The origin and evolution of novel biochemical functions remains one of the key questions in molecular evolution. We study recently emerged methacrylate reductase function that is thought to have emerged in the last century and reported in Geobacter sulfurreducens strain AM-1. We report the sequence and study the evolution of the operon coding for the flavin-containing methacrylate reductase (Mrd) and tetraheme cytochrome с (Mcc) in the genome of G. sulfurreducens AM-1. Different types of signal peptides in functionally interlinked proteins Mrd and Mcc suggest a possible complex mechanism of biogenesis for chromoproteids of the methacrylate redox system. The homologs of the Mrd and Mcc sequence found in δ-Proteobacteria and Deferribacteres are also organized into an operon and their phylogenetic distribution suggested that these two genes tend to be horizontally transferred together. Specifically, the mrd and mcc genes from G. sulfurreducens AM-1 are not monophyletic with any of the homologs found in other Geobacter genomes. The acquisition of methacrylate reductase function by G. sulfurreducens AM-1 appears linked to a horizontal gene transfer event. However, the new function of the products of mrd and mcc may have evolved either prior or subsequent to their acquisition by G. sulfurreducens AM-1. PMID:25962149

  7. Organometallic nonlinear optical (NLO) polymers. Further development of pendant ferrocene poly(methyl methacrylate) copolymers

    SciTech Connect

    Wright, M.E.; Toplikar, E.G.

    1993-12-31

    The synthesis of several new ferrocene monomers is reported. The copolymerization of these new monomers with methyl methacrylate affords polymers of moderate molecular weights. Synthetic procedures for both monomers and polymers as well as analysis of the properties of the polymers will be presented.

  8. 40 CFR 721.10517 - Alkyl methacrylates, polymer with substituted carbomonocycle, hydroxymethyl acrylamide and...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Alkyl methacrylates, polymer with substituted carbomonocycle, hydroxymethyl acrylamide and fluorinatedalkyl acrylate (generic). 721.10517 Section 721.10517 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT SIGNIFICANT NEW USES OF...

  9. Enthalpy of mixing of methacrylic acid with organic solvents at 293 K

    NASA Astrophysics Data System (ADS)

    Sergeev, V. V.

    2016-03-01

    The enthalpies of mixing of binary systems of methacrylic acid with acetonitrile, benzene, hexane, 1,2-dichloroethane, and acetic acid are measured calorimetrically at 293 K and atmospheric pressure. The enthalpy of mixing of all the studied binary systems is positive over the range of concentrations.

  10. 78 FR 55644 - Styrene, Copolymers with Acrylic Acid and/or Methacrylic Acid; Tolerance Exemption

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-09-11

    ... number average molecular weight (in amu), 1,200 when used as an inert ingredient in a pesticide chemical... Register of July 19, 2013 (78 FR 43118) (FRL-9392- 9), EPA issued a notice pursuant to section 408 of FFDCA... number average molecular weight (in amu), 1,200 to include the monomer lauryl methacrylate. That...

  11. RAFT "grafting-through" approach to surface-anchored polymers: Electrodeposition of an electroactive methacrylate monomer.

    PubMed

    Grande, C D; Tria, M C; Felipe, M J; Zuluaga, F; Advincula, R

    2011-02-01

    The synthesis of homopolymer and diblock copolymers on surfaces was demonstrated using electrodeposition of a methacrylate-functionalized carbazole dendron and subsequent reversible addition-fragmentation chain transfer (RAFT) "grafting-through" polymerization. First, the anodically electroactive carbazole dendron with methacrylate moiety (G1CzMA) was electrodeposited over a conducting surface (i.e. gold or indium tin oxide (ITO)) using cyclic voltammetry (CV). The electrodeposition process formed a crosslinked layer of carbazole units bearing exposed methacrylate moieties. This film was then used as the surface for RAFT polymerization process of methyl methacrylate (MMA), styrene (S), and tert-butyl acrylate (TBA) in the presence of a free RAFT agent and a free radical initiator, resulting in grafted polymer chains. The molecular weights and the polydispersity indices (PDI) of the sacrificial polymers were determined by gel permeation chromatography (GPC). The stages of surface modification were investigated using X-ray photoelectron spectroscopy (XPS), ellipsometry, and atomic force microscopy (AFM) to confirm the surface composition, thickness, and film morphology, respectively. UV-Vis spectroscopy also confirmed the formation of an electro-optically active crosslinked carbazole film with a [Formula: see text] - [Formula: see text] absorption band from 450-650nm. Static water contact angle measurements confirmed the changes in surface energy of the ultrathin films with each modification step. The controlled polymer growth from the conducting polymer-modified surface suggests the viability of combining electrodeposition and grafting-through approach to form functional polymer ultrathin films.

  12. Copolymer of methacrylic acid with its diethylammonium salt: Effective waterproofing agent for oil wells

    SciTech Connect

    Kuznetsova, O.N.; Avvakumova, N.I.

    1992-08-10

    In the development of technology for the copolymerization of methacrylic acid with its diethylammonium salt (MAA-MAA{center_dot}DEA), the polymer-like reaction of polymethacrylic acid (PMAA) with diethylamine (DEA) and the polymerization of MAA in the presence of DEA have been studied. 13 refs., 3 figs., 4 tabs.

  13. Crack resistance of polycarbonate and polymethyl methacrylate at high loading rates

    SciTech Connect

    Eremenko, A.S.; Girin, A.S.; Novikov, S.A.; Sinitsyn, V.A.

    1986-01-01

    The authors study the temperature and rate relationships of crack resistance of polymers. Disk specimens of polymethyl methacrylate and type PK-1 polycarbonate were tested at 20 + or - 1 C and -15 + or - 1 C. It was established that in the initial portion the crack propagates at an almost constant rate.

  14. Exposure to airborne methacrylates and natural rubber latex allergens in dental clinics.

    PubMed

    Henriks-Eckerman, M L; Alanko, K; Jolanki, R; Kerosuo, H; Kanerva, L

    2001-06-01

    The exposure of dental personnel to airborne methacrylates and natural rubber latex (NRL) allergens was studied during placing of composite resin restorations in six dental clinics in Finland. Both area and personal sampling were performed, and special attention was paid to measurement of short-term emissions from the patient's mouth. Methacrylates were collected onto thermal desorption tubes filled with Tenax TA and NRL allergens onto membrane filters. The methacrylate samples were thermally desorbed and analysed by gas chromatography with mass selective detection. The NRL allergen concentrations were determined by the allergen-specific IgE-ELISA-inhibition method. The median concentration of 2-hydroxyethylmethacrylate (2-HEMA) was 0.004 mg m-3 close to the dental nurse's work-desk and 0.003 mg m-3 in the breathing zone of the nurse with a maximum concentration of 0.033 mg m-3. Above the patient's mouth the concentration of 2-HEMA was about 0.01 mg m-3 during both working stages, i.e., during application of adhesive and composite resins and during finishing and polishing of the fillings. Maximum concentrations of 3-5 times higher than median concentrations were also measured. Triethyleneglycol dimethacrylate was released into the air mainly during the removal of old composite resin restorations (0.05 mg m-3) and only to a minor extent during finishing and polishing procedures. The median concentration of the NRL allergen was 0.12 au m-3 (au = arbitrary unit) with a maximum concentration of 1.1 au m-3. The results show that, except for short-term emissions from the patient's mouth, the exposure of dental personnel to methacrylates and NRL allergens is very low. Measures to reduce exposure are discussed, as the airborne concentrations of methacrylates should be kept as low as possible in order to reduce the risk of hypersensitivity.

  15. Electroantennogram, flight orientation and oviposition responses of Anopheles stephensi and Aedes aegypti to a fatty acid ester-propyl octadecanoate.

    PubMed

    Seenivasagan, Thangaraj; Sharma, Kavita R; Prakash, Shri

    2012-10-01

    Studies were carried out to evaluate the role of a C(21)-fatty acid ester; propyl octadecanoate (PO) for olfaction-mediated behavioral responses of urban malaria vector, Anopheles stephensi and dengue vector, Aedes aegypti mosquitoes using electroantennogram (EAG), flight orientation and oviposition experiments. Dose dependent electrophysiological responses were recorded for PO from the antenna of both mosquito species in which 10(-5) g elicited significant EAG response. An. stephensi exhibited 2.4, 4.2 and 5.5 fold increased EAG response compared to control, while Ae. aegypti showed 1.9, 4.6 and 5.8 fold EAG responses respectively at 10(-7) g, 10(-6) g and 10(-5) g doses. In the Y-tube olfactometer, 77-80% gravid females of An. stephensi, and 64-77% of Ae. aegypti were caught in the chambers releasing 10(-6) g and 10(-5) g plume of PO. The synthetic fatty acid ester loaded onto an effervescent tablet at 0.1 mg/L, 1 mg/L and 10 mg/L elicited increased ovipositional responses from gravid mosquitoes compared to control. The oviposition activity indices (OAI) of An. stephensi females were +0.40, +0.51 and +0.58, whereas the OAI for Ae. aegypti females were +0.05, +0.36 and +0.57 respectively in 0.1, 1, 10 mg/L of PO; indicated concentration dependent increased egg deposition. Similarly, in the residual activity studies, oviposition substrates treated with PO on effervescent tablet at 1mg/L and 10mg/L received significantly increased egg deposition by gravid females of both mosquito species for up to 1 week compared to control substrates. PO can potentially be used in ovitraps to monitor An. stephensi and Ae. aegypti populations in the vector surveillance programs.

  16. Evaluation of an injectable bone substitute (betaTCP/hydroxyapatite/hydroxy-propyl-methyl-cellulose) in severely osteopenic and aged rats.

    PubMed

    Blouin, S; Moreau, M F; Weiss, P; Daculsi, G; Baslé, M F; Chappard, D

    2006-09-01

    The use of injectable biomaterials is of interest in osteoporotic patients to locally restore bone mass in sites at risk of fracture. An injectable bone substitute (IBS1 made of betaTCP/hydroxyapatite as a calcium phosphate substitute and hydroxy-propyl-methyl-cellulose as a polymer carrier) was used in a severely osteopenic rat model obtained by combining orchidectomy (ORX) and disuse (paralysis induced by botulinum toxin - BTX). Fifty-six aged male rats were randomized into three groups: 18 were SHAM operated; 38 were ORX and BTX injected in the right hindlimb; they constituted the OP (osteoporotic) group. One month after ORX-BTX surgery, 20 of these OP rats received a IBS1 injection in the right femur (OP-IBS1 rats). Animals were studied at the time of IBS1 injection 1 month post ORX-BTX (M1), 1 month (M2) and 2 months (M3) after IBS1 injection. Bone mass (BV/TV) and microarchitectural parameters were measured by microCT. BV/TV was decreased after ORX-BTX; ORX and BTX had cumulative effects on bone loss (differences maximized on the right femur). BV/TV (combining the volume of both bone and material in OP-IBS1 rats) was elevated at M1 but decreased at M2. Marked bone formation was found onto the biomaterial granules but bone had a woven texture. A marked increase in the number of nonosteoclastic TRAcP+ cells was found in the implanted area. IBS1 induced new bone formation shortly after implantation but both IBS1 and woven bone were resorbed without inducing lamellar bone. Biomaterial trials must be conducted with long-term implantation periods, in aged osteoporotic animals.

  17. Effect of butylated hydroxytoluene, curcumin, propyl gallate and thiabendazole on cytochrome P450 forms in cultured human hepatocytes.

    PubMed

    Price, R J; Scott, M P; Giddings, A M; Walters, D G; Stierum, R H; Meredith, C; Lake, B G

    2008-06-01

    1. The objective of this study was to investigate the effects of four food chemicals, namely butylated hydroxytoluene (BHT), curcumin (CC), propyl gallate (PG) and thiabendazole (TB), on cytochrome P450 (CYP) forms in cultured human hepatocytes. 2. Treatment of human hepatocytes for 72 h with 2-200 microM TB produced concentration-dependent increases in CYP1A2, CYP2B6 and CYP3A4 mRNA levels, whereas treatment with BHT increased CYP2B6 and CYP3A4 mRNA levels. CYP1A2, CYP2B6 and CYP3A4 mRNA levels were induced around 48-, 21- and 9-fold, respectively, by 200 microM TB, with CYP2B6 and CYP 3A4 mRNA levels being induced around 12- and 7-fold, respectively, by 200 microM BHT. 3. In contrast, the treatment of human hepatocytes for 72 h with PG and CC had little or no effect on CYP mRNA levels. 4. The treatment of human hepatocytes with TB also induced CYP1A-dependent 7-ethoxyresorufin O-deethylase activity, whereas BHT induced CYP3A-dependent testosterone 6beta-hydroxylase activity. 5. In summary, the results demonstrate that TB is a mixed inducer of CYP forms in human hepatocytes inducing CYP1A, CYP2B and CYP3A forms, whereas BHT is an inducer of CYP2B and CYP3A forms.

  18. Pharmacodynamic profile of the new potent antibronchospastic agent 7-[(2,2-dimethyl)propyl]-1-methyl xanthine.

    PubMed

    Evangelista, S; Ballati, L; Boni, P; Castellucci, A; Perretti, F; Tramontana, M; Toja, E

    1995-05-01

    The pharmacodynamic profile of a new xanthine derivative, 7-[(2,2-dimethyl)propyl]-1-methyl xanthine (CAS 155006-67-0, MX2/120), was investigated in comparison with theophylline. The compound reduces in vitro the bronchospastic tone induced by carbachol or histamine in guinea-pig bronchi, with a potency 11 and 5 fold greater than theophylline, respectively. MX2/120 is significantly more active and long-lasting than theophylline in in vivo experiments toward spasmogens such as acetylcholine (ED50 over 5 h = 15 mumol/kg p.o. vs 230 mumol/kg p.o.) or histamine (ED50 over 5 h = 122 mumol/kg p.o. vs 500 mumol/kg p.o.) while being almost equiactive to theophylline toward antigen and capsaicin induced cough strokes. MX2/120, if administered by i.p. route reduces hyperresponsiveness to histamine induced by PAF and extravasation of protein into bronchoalveolar lavage fluid induced by capsaicin. These anti-inflammatory effects of MX2/120 are of similar extent when compared to theophylline. Unlike theophylline, MX2/120 up to 275 mumol/kg p.o. possesses little or no CNS excitatory effects in mice in terms of reduction of sleeping time induced by chlordiazepoxide, increase in mortality and convulsions induced by pentetrazol and increase in locomotor activity. This reduced neuroexcitatory action is probably related to its lack of affinity to adenosine receptors that could also explain the absence of effect on basal gastric secretion. Chronotropic effects of MX2/120 in conscious rats are similar to those of theophylline while the effects of both drugs on blood pressure are of minor extent. The overall pharmacodynamic properties of MX2/120 are superior to those of theophylline in relation to its antibronchospastic activity and lack of excitatory effects on CNS.

  19. Antidepressant Potential of 5-HT3 Receptor Antagonist, N-n- propyl-3-ethoxyquinoxaline-2-carboxamide (6n)

    PubMed Central

    Mahesh, R; Bhatt, S; Devadoss, T; Jindal, AK; Gautam, BK; Pandey, DK

    2012-01-01

    The present study was designed to evaluate the antidepressant potential of 5-HT3 receptor antagonist N-n-propyl-3-ethoxyquinoxaline-2-carboxamide (6n). The compound ‘6n’ with optimum log P and pA2 value identified from a series of compounds synthesized in our laboratory was subjected to forced Swim Test (FST) (1, 2, and 4 mg/kg, i.p) and Tail Suspension Test (TST) (1, 2, and 4 mg/kg, i.p.). The compound ‘6n’ significantly reduced the duration of immobility in mice without affecting the baseline locomotion. Moreover, ‘6n’ (2 mg/kg, i.p.) potentiated the 5-hydroxytryptophan (5-HTP)-induced head twitch responses in mice and ‘6n’ at tested dose (1 and 2 mg/kg, i.p.) reversed the reserpine-induced hypothermia in rats. In interaction studies of ‘6n’ with various standard drugs/ligands using FST, ‘6n’ (1 mg/kg, i.p.) potentiated the antidepressant effect of venlafaxine (4 and 8 mg/kg, i.p.) and fluoxetine (10 and 20 mg/kg, i.p.). Additionally, ‘6n’ (1 and 2 mg/kg, i.p.) influenced the effect of harmane (5 mg/ kg, i.p.) as well as reversed the effect of parthenolide (1 mg/kg, i.p.) by reducing the duration of immobility in FST. Furthermore, ‘6n’ (1 mg/kg, i.p.) potentiated the effect of bupropion (10 and 20 mg/kg, i.p.) in TST. Chronic ‘6n’ (1 and 2 mg/kg, i.p.) treatment attenuated the behavioral abnormalities in olfactory bulbectomized rats. In conclusion, these various findings reiterated the antidepressant-like effects of ‘6n’ in behavioral models of depression. PMID:23493308

  20. Morphology and water resistance of mixed silane films of bis[3-(triethoxysilyl) propyl]tetrasulfide and bis-[trimethoxysilylpropyl]amine

    SciTech Connect

    Pan, Guirong; Schaefer, Dale W.; van Ooij, Wim J.; Kent, Michael S.; Majewski, Jaroslaw; Yim, Hyun

    2010-12-03

    Functional organosilanes are powerful interface-active agents that find applications as adhesion promoters as well as optical, dielectric and protective coatings. Bis-silanes are of particular interest because they are highly crosslinked leading to very robust films. In almost all applications, the water resistance of the films is a critical performance measure. Here we use neutron reflectivity to address the effect of bridging group on the hydrothermal response of bis-silane films prepared using bis[3-(triethoxysilyl) propyl]tetrasulfide and bis-[trimethoxysilylpropyl]amine. Neat and mixed films are examined as-prepared, after exposure to water vapor and then in the re-dried state. The bridging group is the key factor that controls the morphology and water resistance of silane films. Although bis-sulfur silane is not as condensed as bis-amino silane, bis-sulfur swells less in water because of the hydrophobic nature of bridging group. The reflectivity of bis-sulfur silane film is reversible after room-temperature water conditioning but not at 80 C, indicating chemical alternation of the film at 80 C. The water resistance of mixed silane is roughly that of both components weighted by their volume fraction. But based on the enhanced shrinkage that occurs following water-vapor conditioning of the mixed film, condensation is accelerated in the mixed silane. Regarding the precursor solution, bis-amino silane may act as a catalyst in the hydrolysis of bis-sulfur silane leading to more silanols in the solution and further condensation in the film. Variation in the structure normal to the substrate is also examined by swelling the film with d-nitrobenzene, a non-reacting swelling agent.

  1. Synthesis of [.sup.13C] and [.sup.2H] substituted methacrylic acid, [.sup.13C] and [.sup.2H] substituted methyl methacrylate and/or related compounds

    DOEpatents

    Alvarez, Marc A.; Martinez, Rodolfo A.; Unkefer, Clifford J.

    2008-01-22

    The present invention is directed to labeled compounds of the formulae ##STR00001## wherein Q is selected from the group consisting of --S--, --S(.dbd.O)--, and --S(.dbd.O).sub.2--, Z is selected from the group consisting of 1-naphthyl, substituted 1-naphthyl, 2-naphthyl, substituted 2-naphthyl, and phenyl groups with the structure ##STR00002## wherein R.sub.1, R.sub.2, R.sub.3, R.sub.4 and R.sub.5 are each independently selected from the group consisting of hydrogen, a C.sub.1-C.sub.4 lower alkyl, a halogen, and an amino group selected from the group consisting of NH.sub.2, NHR and NRR' where R and R' are each independently selected from the group consisting of a C.sub.1-C.sub.4 lower alkyl, an aryl, and an alkoxy group, and X is selected from the group consisting of hydrogen, a C.sub.1-C.sub.4 lower alkyl group, and a fully-deuterated C.sub.1-C.sub.4 lower alkyl group. The present invention is also directed to a process of preparing labeled compounds, e.g., process of preparing [.sup.13C]methacrylic acid by reacting a (CH.sub.3CH.sub.2O--.sup.13C(O)--.sup.13CH.sub.2)-- aryl sulfone precursor with .sup.13CHI to form a (CH.sub.3CH.sub.2O--.sup.13C(O)--.sup.13C(.sup.13CH.sub.3).sub.2)-- aryl sulfone intermediate, and, reacting the (CH.sub.3CH.sub.2O--.sup.13C(O)--.sup.13C(.sup.13CH.sub.3).sub.2)-- aryl sulfone intermediate with sodium hydroxide, followed by acid to form [.sup.13C]methacrylic acid. The present invention is further directed to a process of preparing [.sup.2H.sub.8]methyl methacrylate by reacting a (HOOC--C(C.sup.2H.sub.3).sub.2-- aryl sulfinyl intermediate with CD.sub.3I to form a (.sup.2H.sub.3COOC--C(C.sup.2H.sub.3).sub.2)-- aryl sulfinyl intermediate, and heating the(.sup.2H.sub.3COOC--C(C.sup.2H.sub.3).sub.2)-- aryl sulfinyl intermediate at temperatures and for time sufficient to form [.sup.2H.sub.8]methyl methacrylate.

  2. Process for producing a well-adhered durable optical coating on an optical plastic substrate. [abrasion resistant polymethyl methacrylate lenses

    NASA Technical Reports Server (NTRS)

    Kubacki, R. M. (Inventor)

    1978-01-01

    A low temperature plasma polymerization process is described for applying an optical plastic substrate, such as a polymethyl methacrylate lens, with a single layer abrasive resistant coating to improve the durability of the plastic.

  3. ATOM TRANSFER RADICAL POLYMERIZATION OF N-BUTYL METHACRYLATE IN AQUEOUS DISPERSED SYSTEMS: A MINIEMULSION APPROACH. (R826735)

    EPA Science Inventory

    Ultrasonication was applied in combination with a hydrophobe for the copper-mediated atom transfer radical polymerization of n-butyl methacrylate in an aqueous dispersed system. A controlled polymerization was successfully achieved, as demonstrated by a linear correlation between...

  4. Effect of epoxidation on 30% poly(methyl methacrylate)-grafted natural rubber polymer electrolytes

    SciTech Connect

    Nazir, Khuzaimah; Aziz, Ahmad Fairoz; Adam, Nurul Ilham; Yahya, Muhd Zu Azhan; Ali, Ab Malik Marwan

    2015-08-28

    Epoxidized 30% poly(methyl methacrylate)-grafted natural rubber (EMG 30) as a polymer host in solid polymer electrolytes (SPEs) has been investigated. EMG30 was synthesized via performicepoxidation method onto 30% poly(methyl methacrylate)-grafted natural rubber (MG30) and the formations of epoxy group were discussed. The EMG30 were characterized by proton nuclear magnetic resonance ({sup 1}HNMR) to investigate their chemical structure and differential scanning calorimeter to determine their crystallinity. A new peak in {sup 1}HNMR spectra (2.71 ppm) confirmed the appearance of epoxy group. SPE based on EMG30 doped with 40 wt% LiCF{sub 3}SO{sub 3} show the highest conductivity. The complexation between EMG30 and LiCF{sub 3}SO{sub 3} were confirmed by attenuated total reflection Fourier transform infrared (ATR-FTIR)

  5. Separation of heavy metals from water by functionalized glycidyl methacrylate poly (high internal phase emulsions).

    PubMed

    Huš, Sebastjan; Kolar, Mitja; Krajnc, Peter

    2016-03-11

    Removal of silver, lead and cadmium ions from both model solutions and real contaminated water was achieved, in a flow through manner, by using highly porous functionalized poly(glycidyl methacrylate) materials, prepared by the polymerisation of high internal phase emulsions (polyHIPE), with significant sorption differences between metals allowing for selective removal. PolyHIPEs, initially prepared from glycidyl methacrylate as a functional monomer, were functionalized with pentaerythritol tetrakis(3-mercaptopropionate), 1,9-nonanedithiol and 2-aminobenzenethiol via the epoxy ring opening on the polymer supports and applied in a flow-through manner via encasements into dedicated disk holders. Capacity of 21.7mg Ag per gram of polymer was found for 1,9-nonanedithiol functionalized polymers, while the capacity was decreasing with the decreasing ionic radius of the metal; the dynamics of sorption also depended on metal ion size and furthermore on the thiol used for the polymer functionalization.

  6. Preparation of monodisperse porous silica particles using poly(glycidyl methacrylate) microspheres as a template.

    PubMed

    Grama, S; Horák, D

    2015-01-01

    Monodisperse macroporous poly(glycidyl methacrylate) (PGMA) microspheres were used as a template for preparing porous silica particles. The starting polymer microspheres that were 9.3 microm in size were synthesized by multistep swelling polymerization using a modified Ugelstad technique. Subsequently, silica (SiO2) was deposited on the surface and inside the PGMA microspheres to produce poly(glycidyl methacrylate)-silica hybrid particles (PGMA-SiO2). Upon calcination of the PGMA-SiO2 microspheres, porous silica particles were formed. The morphology, particle size, polydispersity and inner structure of the silica microspheres were investigated by scanning and transmission electron microscopy. Thermogravimetric analysis and dynamic adsorption of nitrogen determined the amount of silica formed and its specific surface area. Compared with the starting PGMA microspheres, the size of the porous silica particles decreased by up to 30%. These porous silica microspheres are promising for chromatography and biomedical applications. PMID:26447591

  7. Experimental and theoretical investigation of the complexation of methacrylic acid and diisopropyl urea.

    PubMed

    Pogány, Peter; Razali, Mayamin; Szekely, Gyorgy

    2017-01-01

    The present paper explores the complexation ability of methacrylic acid which is one of the most abundant functional monomer for the preparation of molecularly imprinted polymers. Host-guest interactions and the mechanism of complex formation between methacrylic acid and potentially genotoxic 1,3-diisopropylurea were investigated in the pre-polymerization solution featuring both experimental (NMR, IR) and in silico density functional theory (DFT) tools. The continuous variation method revealed the presence of higher-order complexes and the appearance of self-association which were both taken into account during the determination of the association constants. The quantum chemical calculations - performed at B3LYP 6-311++G(d,p) level with basis set superposition error (BSSE) corrections - are in agreement with the experimental observations, reaffirming the association constants and justifying the validity of computational investigation of such systems. Furthermore, natural bond orbital analysis was carried out to appraise the binding properties of the complexes.

  8. Unbiased phosphoproteomic method identifies the initial effects of a methacrylic acid copolymer on macrophages.

    PubMed

    Chamberlain, Michael Dean; Wells, Laura A; Lisovsky, Alexandra; Guo, Hongbo; Isserlin, Ruth; Talior-Volodarsky, Ilana; Mahou, Redouan; Emili, Andrew; Sefton, Michael V

    2015-08-25

    An unbiased phosphoproteomic method was used to identify biomaterial-associated changes in the phosphorylation patterns of macrophage-like cells. The phosphorylation differences between differentiated THP1 (dTHP1) cells treated for 10, 20, or 30 min with a vascular regenerative methacrylic acid (MAA) copolymer or a control methyl methacrylate (MM) copolymer were determined by MS. There were 1,470 peptides (corresponding to 729 proteins) that were differentially phosphorylated in dTHP1 cells treated with the two materials with a greater cellular response to MAA treatment. In addition to identifying pathways (such as integrin signaling and cytoskeletal arrangement) that are well known to change with cell-material interaction, previously unidentified pathways, such as apoptosis and mRNA splicing, were also discovered. PMID:26261332

  9. Amphiphilic Copolymers of Polyfluorene Methacrylates Exhibiting Tunable Emissions for Ink-Jet Printing.

    PubMed

    Deng, Chao; Ling, Jun

    2016-08-01

    Functionalized polyfluorene receives more and more attention due to its wide applications. Here, the syntheses of three novel polyfluorene-based methacrylate macromonomers exhibiting a vast flexibility for further applications are reported. Their emissions strongly depend on the end groups and thus the macromonomers provide blue, green, and red emissions simultaneously with the same excitation light of 365 nm. Their well-defined copolymers with 2-(dimethylamino) ethyl methacrylate via reversible addition-fragmentation chain transfer polymerization are investigated in detail. These copolymers exhibit high quantum yields in solid film (up to 0.8), and self-assemble into photoluminescent nanoparticles in aqueous solutions with pure blue, green, and red emissions. By simply mixing them, perfect white light emission with high quality is obtained. These aqueous nanoparticles solutions are ready for ink-jet printing to produce exquisite bright and colorful fluorescent pictures. PMID:27310485

  10. Experimental and theoretical investigation of the complexation of methacrylic acid and diisopropyl urea.

    PubMed

    Pogány, Peter; Razali, Mayamin; Szekely, Gyorgy

    2017-01-01

    The present paper explores the complexation ability of methacrylic acid which is one of the most abundant functional monomer for the preparation of molecularly imprinted polymers. Host-guest interactions and the mechanism of complex formation between methacrylic acid and potentially genotoxic 1,3-diisopropylurea were investigated in the pre-polymerization solution featuring both experimental (NMR, IR) and in silico density functional theory (DFT) tools. The continuous variation method revealed the presence of higher-order complexes and the appearance of self-association which were both taken into account during the determination of the association constants. The quantum chemical calculations - performed at B3LYP 6-311++G(d,p) level with basis set superposition error (BSSE) corrections - are in agreement with the experimental observations, reaffirming the association constants and justifying the validity of computational investigation of such systems. Furthermore, natural bond orbital analysis was carried out to appraise the binding properties of the complexes. PMID:27419640

  11. Preparation of monodisperse porous silica particles using poly(glycidyl methacrylate) microspheres as a template.

    PubMed

    Grama, S; Horák, D

    2015-01-01

    Monodisperse macroporous poly(glycidyl methacrylate) (PGMA) microspheres were used as a template for preparing porous silica particles. The starting polymer microspheres that were 9.3 microm in size were synthesized by multistep swelling polymerization using a modified Ugelstad technique. Subsequently, silica (SiO2) was deposited on the surface and inside the PGMA microspheres to produce poly(glycidyl methacrylate)-silica hybrid particles (PGMA-SiO2). Upon calcination of the PGMA-SiO2 microspheres, porous silica particles were formed. The morphology, particle size, polydispersity and inner structure of the silica microspheres were investigated by scanning and transmission electron microscopy. Thermogravimetric analysis and dynamic adsorption of nitrogen determined the amount of silica formed and its specific surface area. Compared with the starting PGMA microspheres, the size of the porous silica particles decreased by up to 30%. These porous silica microspheres are promising for chromatography and biomedical applications.

  12. Grafting of Chitosan and Chitosantrimethoxylsilylpropyl Methacrylate on Single Walled Carbon Nanotubes-Synthesis and Characterization

    PubMed Central

    Carson, Laura; Kelly-Brown, Cordella; Stewart, Melisa; Oki, Aderemi; Regisford, Gloria; Stone, Julia; Traisawatwong, Pasakorn; Durand-Rougely, Clarissa; Luo, Zhiping

    2011-01-01

    Acid functionalized single walled carbon nanotubes (CNTs) were grafted to chitosan by first reacting the oxidized CNTs with thionyl chloride to form acyl-chlorinated CNTs. This product was subsequently dispersed in chitosan and covalently grafted to form CNT-chitosan. CNT-chitosan was further grafted onto 3-trimethoxysilylpropyl methacrylate by free radical polymerization conditions, to yield CNT-g-chitosan-g-3-trimethoxysilylpropyl methacrylate (TMSPM), hereafter referred to as CNT-chitosan-3-TMSPM. These composites were characterized by Fourier Transform Infrared Resonance Spectroscopy (FTIR), carbon-13 nuclear magnetic resonance (13C NMR), Thermogravimetric Analysis (TGA), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The composite showed improved thermal stability and could be of great potential use in bone tissue engineering. PMID:21765959

  13. Surface-initiated Polymerization of Azidopropyl Methacrylate and its Film Elaboration via Click Chemistry

    PubMed Central

    Saha, Sampa; Bruening, Merlin L.; Baker, Gregory L.

    2013-01-01

    Azidopropyl methacrylate (AzPMA), a functional monomer with a pendent azido group, polymerizes from surfaces and provides polymer brushes amenable to subsequent elaboration via click chemistry. In DMF at 50 °C, click reactions between poly(AzPMA) brushes and an alkynylated dye proceed with >90% conversion in a few minutes. However, in aqueous solutions, reaction with an alkyne-containing poly(ethylene glycol) methyl ether (mPEG, Mn=5000) gives <10% conversion after a 12-h reaction at room temperature. Formation of copolymers with AzPMA and polyethylene glycol methyl ether methacrylate (mPEGMA) enables control over the hydrophilicity and functional group density in the copolymer to increase the yield of aqueous click reactions. The copolymers show reaction efficiencies as high as 60%. These studies suggest that for aqueous applications such as bioconjugation via click chemistry, control over brush hydrophilicity is vital. PMID:24293702

  14. Quaternary ammonium silane-functionalized, methacrylate resin composition with antimicrobial activities and self-repair potential

    PubMed Central

    Gong, Shi-qiang; Niu, Li-na; Kemp, Lisa K.; Yiu, Cynthia K.Y.; Ryou, Heonjune; Qi, Yi-pin; Blizzard, John D.; Nikonov, Sergey; Brackett, Martha G.; Messer, Regina L.W.; Wu, Christine D.; Mao, Jing; Brister, L. Bryan; Rueggeberg, Frederick A.; Arola, Dwayne D.; Pashley, David H.; Tay, Franklin R.

    2012-01-01

    Design of antimicrobial polymers for enhancing healthcare issues and minimizing environmental problems is an important endeavor with both fundamental and practical implications. Quaternary ammonium silane-functionalized methacrylate (QAMS) represents an example of antimicrobial macromonomers synthesized by a sol-gel chemical route; these compounds possess flexible Si-O-Si bonds. In present work, a partially-hydrolyzed QAMS copolymerized with bis-GMA is introduced. This methacrylate resin was shown to possess desirable mechanical properties with both a high degree of conversion and minimal polymerization shrinkage. Kill-on-contact microbiocidal activities of this resin were demonstrated using single-species biofilms of Streptococcus mutans (ATCC 36558), Actinomyces naeslundii (ATCC 12104) and Candida albicans (ATCC 90028). Improved mechanical properties after hydration provided the proof-of-concept that QAMS-incorporated resin exhibits self-repair potential via water-induced condensation of organic modified silicate (ormosil) phases within the polymerized resin matrix. PMID:22659173

  15. Synthesis and characterization of hydrolysed starch-g-poly(methacrylic acid) composite.

    PubMed

    Zahran, Magdy K; Ahmed, Enas M; El-Rafie, Mohamed H

    2016-06-01

    A novel method for the synthesis of starch-g-poly(methacrylic acid) composite was adopted by graft polymerization of hydrolysed starch (HS) and methacrylic acid (MAA) in aqueous medium using an efficient sodium perborate (SPB)-thiourea (TU) redox initiation system. The parameters influencing the redox system efficiency and thence the polymerization method were considered. These parameters comprehended the concentrations of MAA, SPB, TU and SPB/TU molar ratio as well as the polymerization temperature. The polymerization reaction was scrutinized through calculation of the MAA total conversion percent (TC%). The resultant poly(MAA-HS) composite was assessed by evaluating the polymer criteria (the graft yield, GY%; the grafting efficiency, GE%; the homopolymer, HP%; and the total conversion). The comportment of the apparent viscosity of the cooked poly(MAA)-starch composite paste, obtained under diverse polymerization conditions, was examined. Tentative mechanisms, which depict all occasions that happen amid the entire course of the polymerization reaction, have been proffered. PMID:26968925

  16. Atom transfer radical polymerization to fabricate monodisperse poly[glycidyl methacrylate-co-poly (ethylene glycol) methacrylate] microspheres and its application for protein affinity purification.

    PubMed

    Yu, Ling; Shi, Zhuan Zhuan; Li, Chang Ming

    2015-09-01

    Poly[glycidyl methacrylate-co-poly (ethylene glycol) methacrylate] microspheres for the first time were successfully synthesized by atom transfer radical polymerization (ATRP) method at room temperature. The co-polymerization approach was investigated to delicately control the microsphere morphology and size-distribution by reaction conditions including solvent percentage, monomer loading and rotation speed. The results show that the average size of the microspheres is ∼5.7 μm with coexistence of epoxy, hydroxyl and ether groups, which provide plentiful functional sites for protein anchoring. The mechanism of the microsphere formation is proposed. The microsphere successfully demonstrates its unique application for affinity purification of proteins, in which the functional epoxy group facilitates a simple and efficient protein covalent immobilization to purify immunoglobulin G on the microspheres, while the hydrophilic poly (ethylene glycol) motif can repulse nonspecific protein adsorption for good specificity. This microspheres can be used in broad protein biosensors due to their abundant functional groups and high surface to volume ratio.

  17. Study of the water structure in poly(methyl methacrylate-block-2-hydroxyethyl methacrylate) and its relationship to platelet adhesion on the copolymer surface.

    PubMed

    Mochizuki, Akira; Namiki, Takahiro; Nishimori, Yusuke; Ogawa, Haruki

    2015-01-01

    The water structure and platelet compatibility of poly(methyl methacrylate (MMA)-block-2-hydroxyethyl methacrylate (HEMA)) were investigated. The molecular weight (Mn) of the polyHEMA segment was kept constant (average: 9600), while the Mn of the polyMMA segment was varied from 1340 to 7390. The equilibrium water content of the copolymers was found to be mainly governed by the HEMA content. The water structure in the copolymers was characterized in terms of the amounts of non-freezing and freezing water (abbreviated as Wnf and Wfz, respectively) using differential scanning calorimetry. It was found that the Wnf for the copolymers were higher than those estimated from the Wnf for the HEMA and MMA homopolymers and that the amount of excess non-freezing water depended on the polyMMA segment length. In addition, X-ray diffraction analysis revealed that some of the copolymers had cold-crystallizable water. These facts suggested that the polyMMA segments were involved in determining the water structures in the copolymers. Furthermore, the platelet compatibility of the copolymers was improved as compared to that of the HEMA homopolymer. It was therefore concluded that the platelet compatibility of the copolymer was related to the amount of excess non-freezing water.

  18. Production of propyl gallate in nonaqueous medium using cell-associated tannase of Bacillus massiliensis: effect of various parameters and statistical optimization.

    PubMed

    Aithal, Mahesh; Belur, Prasanna D

    2013-01-01

    Enzymatic synthesis of propyl gallate in an organic solvent was studied using cell-associated tannase (E.C. 3.1.1.20) of Bacillus massiliensis. Lyophilized biomass showing tannase activity was used as a biocatalyst. The influence of buffer pH and strength, water activity, temperature, biocatalyst loading, gallic acid concentration, and 1-propanol concentration was studied by the one-factor-at-a-time method. Subsequently, response surface methodology was applied based on a central composite design to determine the effects of three independent variables (biocatalyst loading, gallic acid concentration, and 1-propanol concentration) and their mutual interactions. A total of 20 experiments were conducted, and a statistical model was developed, which predicted the maximum propyl gallate yield of 20.28 μg/mL in the reaction mixture comprising 40.4 mg biocatalyst, 0.4 mM gallic acid, and 6.52 % (v/v) 1-propanol in 9.5 mL benzene at 30°C. The subsequent verification experiments established the validity of the model. Under optimal conditions, 25% conversion of gallic acid to propyl gallate was achieved on a molar basis. The absence of the need for enzyme purification and subsequent immobilization steps and good conversion efficiency makes this enzyme system an interesting one. Reports on the applications of bacterial whole cell systems for synthetic reactions in organic solvents are scarce, and perhaps this is the first report on bacterial cell-associated tannase-mediated esterification in a nonaqueous medium. PMID:23600575

  19. No-carrier-added carbon-11-labeled sn-1,2- and sn-1,3-diacylglycerols by (11C)propyl ketene method

    SciTech Connect

    Imahori, Y.; Fujii, R.; Ueda, S.; Ido, T.; Nishino, H.; Moriyama, Y.; Yamamoto, Y.L.; Nakahashi, H. )

    1991-08-01

    This article describes the preparation of sn-1,2-(11C)diacylglycerols and sn-1,3-(11C)diacylglycerols by a no-carrier-added reaction based on a labeling method using (1-11C)propyl ketene, which is one of the most potent acylating agents. (1-11C)Propyl ketene was produced by pyrolytic decomposition of (1-11C)butyric acid and was trapped in pyridine containing L-alpha-palmitoyl-lysophosphatidylcholine, producing L-alpha-palmitoyl-2-(1-11C)butyryl-sn-glycero-3-phosphorylcholine. The authors adopted an enzymatic reaction to remove the phosphorylcholine, in which L-alpha-palmitoyl-2-(1-11C)butyryl-sn-glycero-3-phosphorylcholine was incubated with phospholipase C, hydrolyzing to produce 1-palmitoyl-sn-2-(1-11C)butyrylglycerol. Total synthesis time was about 50 minutes and the specific activity was estimated at 93 GBq/mumol (2.5 Ci/mumol) at end of synthesis. Radiochemical yield was 3.8% based on the trapped 11CO2. sn-1,3-(11C)Diacylglycerol was also synthesized by (1-11C)propyl ketene reaction with 1-palmitoyl-sn-glycerol in a single procedure. The regional brain tissue radioactivities obtained in sn-1,2-(11C)diacylglycerol were higher than those of sn-1,3-(11C)diacylglycerol, and the regional values varied widely. In autoradiography of brain slices from conscious rats, sn-1,2-(11C)diacylglycerol incorporation sites were discretely localized, especially in the amygdala, cerebral cortex, and hippocampus, suggesting that intensive neuronal processing occurred in these areas on the basis of phosphatidylinositol turnover.

  20. Fabrication of Poly(methyl Methacrylate) microfluidic chips by redox-initiated polymerization

    SciTech Connect

    Chen, Jiang; Lin, Yuehe; Chen, Gang

    2007-08-16

    In this report, a method based on the redox-initiated polymerization of methyl methacrylate (MMA) has been developed for the rapid fabrication of PMMA microfluidic chips.The new fabrication approach obviates the need for special equipment and significantly simplifies the process of fabricating microdevices. The attractive performance of the novel PMMA microchips has been demonstrated in connection with contactless conductivity detection for the separation and detection of ionic species.

  1. Carboxybetaine methacrylate polymers offer robust, long-term protection against cell adhesion

    PubMed Central

    Mahmud, Goher; Huda, Sabil; Yang, Wei; Kandere-Grzybowska, Kristiana; Pilans, Didzis; Jiang, Shaoyi; Grzybowski, Bartosz A.

    2013-01-01

    Films of poly(carboxybetaine methacrylate), poly(CBMA), grafted onto microetched gold slides are effective in preventing non-specific adhesion of cells of different types. The degree of adhesion resistance is comparable to that achieved with the self-assembled monolayers, SAMs, of oligo(ethylene glycol) alkanethiolates. In sharp contrast to the SAMs, however, substrates protected with poly(CBMA) can be stored in dry state without losing their protective properties for periods up to two weeks. PMID:21711048

  2. Durability of Poly(Methyl Methacrylate) Lenses Used in Concentrating Photovoltaic Technology (Revised) (Presentation)

    SciTech Connect

    Miller, D. C.; Carloni, J. D.; Pankow, J. W.; Gjersing, E. L.; To, B.; Packard, C. E.; Kennedy, C. E.; Kurtz, S. R.

    2012-01-01

    Concentrating photovoltaic (CPV) technology recently gained interest based on its expected low levelized cost of electricity, high efficiency, and scalability. Many CPV systems employ Fresnel lenses composed of poly(methyl methacrylate) (PMMA) to obtain a high optical flux density on the cell. The optical and mechanical durability of these lenses, however, is not well established relative to the desired surface life of 30 years. Our research aims to quantify the expected lifetime of PMMA in key market locations (FL, AZ, and CO).

  3. Radiation-grafting of ethylene glycol dimethacrylate (EGDMA) and glycidyl methacrylate (GMA) onto silicone rubber

    NASA Astrophysics Data System (ADS)

    Flores-Rojas, G. G.; Bucio, E.

    2016-10-01

    Silicone rubber (SR) was modified with a graft of ethylene glycol dimethacrylate (EGDMA) and glycidyl methacrylate (GMA) using either gamma-radiation or azobisisobutyronitrile (AIBN). The graft efficiency was evaluated as a function of monomer concentration, absorbed dose, reaction temperature, and concentration of AIBN. The hydrophilicity of the grafted films was measured by contact angle and their equilibrium swelling time in ethanol. Additional characterization by infrared (FTIR-ATR) spectroscopy, thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) is also reported.

  4. Reactive aluminum metal nanoparticles within a photodegradable poly(methyl methacrylate) matrix

    NASA Astrophysics Data System (ADS)

    Patel, Ashish; Becic, Jasmin; Buckner, Steven W.; Jelliss, Paul A.

    2014-01-01

    We report here on new photoreactive core-matrix reactive metal nanoparticles. Poly(methyl methacrylate)-capped aluminum nanoparticles (PMMA-Al NPs) were synthesized and demonstrated air stability on the order of 2 months. Upon exposure of the PMMA-Al NPs to UV radiation the composite reacts more rapidly to release H2 gas from alkaline solution. FTIR spectroscopy indicates that the PMMA cap degrades under UV irradiation, exposing the reactive metal core.

  5. Polypropylene fumarate/phloroglucinol triglycidyl methacrylate blend for use as partially biodegradable orthopaedic cement.

    PubMed

    Jayabalan, M; Thomas, V; Rajesh, P N

    2001-10-01

    Polypropylene fumarate/phloroglucinol triglycidyl methacrylate oligomeric blend-based bone cement was studied. Higher the percentage of phloroglucinol triglycidyl methacrylate, lesser the setting time. An optimum setting time could be arrived with 50:50 blend composition of the two oligomers. Composite cement of 50:50 blend prepared with hydroxyapatite granules of particle size 125 microm binds bovine rib bones. The tensile strength of this adhesive bond was found to be 1.11 kPa. The thermal studies suggest the onset of cross-linking reaction in the cured blend if the blend is heated. The absence of softening endotherm in the cured blend shows the thermosetting-like amorphous nature of blend system, which may restrict the changes in creep properties. The in vitro biodegradation studies reveal possible association of calcium ions with negatively charged units of degrading polymer chain resulting in slow down of degradation. Relatively slow degradation was observed in Ringer's solution. The study reveals the potential use of polypropylene fumarate/phloroglucinol triglycidyl methacrylate as partially degradable polymeric cement for orthopaedic applications. PMID:11545309

  6. Mechanical Properties of Individual Composite Poly(methyl-methacrylate) -Multiwalled Carbon Nanotubes Nanofibers

    NASA Astrophysics Data System (ADS)

    Grabbert, Niels; Wang, Bei; Avnon, Asaf; Zhuo, Shuyao; Datsyuk, Vitaliy; Trotsenko, Svitlana; Mackowiak, Piotr; Kaletta, Katrin; Lang, Klaus-Dieter; Ngo, Ha-Duong

    2014-08-01

    Multiwalled carbon nanotubes with their superb mechanical properties are an unique filler material for polymer composites. Here, we present an investigation of mechanical properties of electrospun Poly-(methyl-methacrylate) multiwalled carbon nanotubes composite nanofibers. The method of electrospinning was used to fabricate suspended individual Poly-(methyl-methacrylate) multiwalled carbon nanotubes nanofibers. In order to reinforce the nanofibers, different high concentration of multiwalled carbon nanotubes were used. Transmission electron microscopy measurements reveal a successful filling of the nanofibers. The different types of nanofibers were deposited at SiO2 substrates. Which were previously etched, to create trenches for bend tests. Followed by fixing the nanofiber with a focus ion beam platinum deposition at the trench edges. An atomic force microscopy was used to perform the mechanical nanofiber bending tests over trenches. The results were compared with pristine Poly-(methyl- methacrylate) nanofibers to nanofibers with 15 weight% and 20 weight% multiwalled carbon nanotubes composite fibers. We observed that pristine nanofibers have Young's modulus of 136 MPa, while for composite nanofibers with 15 weight% have 2.65 GPa and with 20 weight% have 6.06 GPa (at room temperature and air ambiance). This corresponds to an increase of Young's modulus of 19 fold between the pristine nanofibers and the 15 weight% of mutliwalled carbon nanotubes filled nanofibers. Therefore the increase of the Young's modulus compared between the pristine and the 20 weight% MWCNT filled nanofibers corresponds to 45 fold.

  7. Cell-laden microengineered pullulan methacrylate hydrogels promote cell proliferation and 3D cluster formation.

    PubMed

    Bae, Hojae; Ahari, Amir F; Shin, Hyeongho; Nichol, Jason W; Hutson, Che B; Masaeli, Mahdokht; Kim, Su-Hwan; Aubin, Hug; Yamanlar, Seda; Khademhosseini, Ali

    2011-01-01

    The ability to encapsulate cells in three-dimensional (3D) environments is potentially of benefit for tissue engineering and regenerative medicine. In this paper, we introduce pullulan methacrylate (PulMA) as a promising hydrogel platform for creating cell-laden microscale tissues. The hydration and mechanical properties of PulMA were demonstrated to be tunable through modulation of the degree of methacrylation and gel concentration. Cells encapsulated in PulMA exhibited excellent viability. Interestingly, while cells did not elongate in PulMA hydrogels, cells proliferated and organized into clusters, the size of which could be controlled by the hydrogel composition. By mixing with gelatin methacrylate (GelMA), the biological properties of PulMA could be enhanced as demonstrated by cells readily attaching to, proliferating, and elongating within the PulMA/GelMA composite hydrogels. These data suggest that PulMA hydrogels could be useful for creating complex, cell-responsive microtissues, especially for applications that require controlled cell clustering and proliferation.

  8. Rapid determination of sterols in vegetable oils by CEC using methacrylate ester-based monolithic columns.

    PubMed

    Lerma-García, María Jesús; Simó-Alfonso, Ernesto F; Ramis-Ramos, Guillermo; Herrero-Martínez, José M

    2008-11-01

    A method for the determination of sterols in vegetable oils by CEC with UV-Vis detection, using methacrylate ester-based monolithic columns, has been developed. To prepare the columns, polymerization mixtures containing monomers of different hydrophobicities were tried. The influence of composition of polymerization mixture was optimized in terms of porogenic solvent, monomers/porogens and monomer/crosslinker ratios. The composition of the mobile phase was also studied. The optimum monolith was obtained with lauryl methacrylate monomer at 60:40% (wt:wt) lauryl methacrylate/ethylene dimethacrylate ratio and 60 wt% porogens with 20 wt% of 1,4-butanediol (12 wt% 1,4-butanediol in the polymerization mixture). Excellent resolution between sterols was achieved in less than 7 min with an 85:10:5 v/v/v ACN-2-propanol-water buffer containing 5 mM Tris at pH 8.0. The limits of detection were lower than 0.04 mM, and inter-day and column-to-column reproducibilities at 0.75 mM were better than 6.2%. The method was applied to the determination of sterols in vegetable oils with different botanical origins and to detect olive oil adulteration with sunflower and soybean oils.

  9. Study of sodium dodecyl sulfate-poly(propylene oxide) methacrylate mixed micelles.

    PubMed

    Bastiat, Guillaume; Grassl, Bruno; Khoukh, Abdel; François, Jeanne

    2004-07-01

    Sodium dodecyl sulfate (SDS)-poly(propylene oxide) methacrylate (PPOMA) (of molecular weight M(w) = 434 g x mol(-1)) mixtures have been studied using conductimetry, static light scattering, fluorescence spectroscopy, and 1H NMR. It has been shown that SDS and PPOMA form mixed micelles, and SDS and PPOMA aggregation numbers, N(ag SDS) and N(ag PPOMA), have been determined. Total aggregation numbers of the micelles (N(ag SDS) + N(ag PPOMA)) and those of SDS decrease upon increasing the weight ratio R = PPOMA/SDS. Localization of PPOMA inside the mixed micelles is considered (i) using 1H NMR to localize the methacrylate function at the hydrophobic core-water interface and (ii) by studying the SDS-PPO micellar system (whose M(w) = 400 g x mol(-1)). Both methods have indicated that the PPO chain of the macromonomer is localized at the SDS micelle surface. Models based on the theorical prediction of the critical micellar concentration of mixed micelles and structural model of swollen micelles are used to confirm the particular structure proposed for the SDS-PPOMA system, i.e., the micelle hydrophobic core is primarily composed of the C12 chains of the sodium dodecyl sulfate, the hydrophobic core-water interface is made up of the SDS polar heads as well as methacrylate functions of the PPOMA, the PPO chains of the macromonomer are adsorbed preferentially on the surface, i.e., on the polar heads of the SDS.

  10. CEC column behaviour of butyl and lauryl methacrylate monoliths prepared in non-aqueous media.

    PubMed

    Cantó-Mirapeix, Amparo; Herrero-Martínez, José M; Mongay-Fernández, Carlos; Simó-Alfonso, Ernesto F

    2009-02-01

    Polymeric monolithic stationary phases for capillary electrochromatography were prepared using two bulk monomers, butyl methacrylate (BMA) and lauryl methacrylate (LMA), by in situ polymerization in non-aqueous media. The effect of 1,4-butanediol/1-propanol ratio on porous properties was investigated separately for each monomer, keeping the proportion of monomers to pore-forming solvents fixed at 40:60 wt:wt. Also, mixtures of BMA and LMA at different 1,4-butanediol/1-propanol ratios were studied for tailoring the morphological features of the monolithic columns. The chromatographic performance of the different columns was evaluated by means of van Deemter plots of polycyclic aromatic hydrocarbons. Mercury-intrusion porosimetry, SEM, and nitrogen-adsorption measurements were also performed in order to understand their retention behaviour and porous properties. A comparison of these features was also performed for monoliths made with one bulk monomer (BMA or LMA) and with mixtures of both. These mixed monoliths showed satisfactory efficiencies and analysis times compared with those made with one bulk monomer; thus, the BMA-LMA monoliths constitute an attractive alternative to manipulate the electrochromatographic properties of methacrylate beds in CEC. PMID:19170053

  11. Reactive electrospinning and biodegradation of cross-linked methacrylated polycarbonate nanofibers.

    PubMed

    Wu, Ruizhi; Zhang, Jian-Feng; Fan, Yuwei; Stoute, Diana; Lallier, Thomas; Xu, Xiaoming

    2011-06-01

    The objectives of this study were to fabricate cross-linked biodegradable polycarbonate nanofibers and to investigate their biodegradability by different enzymes. Poly(2,3-dihydroxycarbonate) was synthesized from naturally occurring l-tartaric acid. The hydroxyl groups on the functional polycarbonate were converted to methacrylate groups to enable the polymer to cross-link under UV irradiation. Smooth cross-linked methacrylated polycarbonate nanofibers (300-1800 nm) were fabricated by a reactive electrospinning process with in situ UV radiation from a mixed solution of linear methacrylated polycarbonate (MPC) and poly(ethylene oxide) (PEO) (MPC:PEO = 9:1) in methanol/chloroform (50/50). These cross-linked nanofibers have shown excellent solvent resistance and their solubility decreases with increasing degree of cross-linking. The thermal properties of linear and cross-linked polycarbonate nanofibers were investigated by differential scanning calorimetry and thermogravimetric analysis. The cross-linked polycarbonate nanofibers show no melting point below 200 °C and their decomposition temperature increases with increasing cross-linking degree. Their biodegradation products by five different enzymes were analyzed using liquid chromatography-mass spectrometry (LC-MS). The biodegradability of the polycarbonate nanofibers decreases with increasing cross-linking degree. These nanofibers were found to support human fibroblast survival and to promote cell attachment. This study demonstrates that cross-linked biodegradable polycarbonate nanofibers with different chemical properties and biodegradability can be fabricated using the novel reactive electrospinning technology to meet the needs of different biomedical applications.

  12. Determination of thermodynamic properties of poly (cyclohexyl methacrylate) by inverse gas chromatography.

    PubMed

    Kaya, Ismet; Pala, Cigdem Yigit

    2014-07-01

    In this work, some thermodynamic properties of poly (cyclohexyl methacrylate) were studied by inverse gas chromatography (IGC). For this purpose, the polymeric substance was coated on Chromosorb W and which was filled into a glass column. The retention times (t(r)) of the probes were determined from the interactions of poly (cyclohexyl methacrylate) with n-pentane, n-hexane, n-heptane, n-octane, n-decane, methanol, ethanol, 2-propanol, butanol, acetone, ethyl methyl ketone, benzene, toluene and o-xylene by IGC technique. Then, the specific volume (Vg(0)) was determined for each probe molecule. By using (1/T; lnVg(0)) graphics, the glass transition temperature of poly (cyclohexyl methacrylate) was found to be 373 K. The adsorption heat under the glass transition temperature (deltaH(a)), and partial molar heat of sorption above the glass transition (deltaH1(S)), partial molar free energy of sorption (deltaG1(S)) and partial molar entropy of sorption (deltaS1(S)) belonging to sorption for every probe were calculated. The partial molar heat of mixing at infinite dilution (deltaH1(infinity)), partial molar free energy of mixing at infinite dilution (deltaG1(infinity)), Flory-Huggins interaction parameter (chi12(infinity)) and weight fraction activity coefficient (a1/w1)(infinity) values of polymer-solute systems were calculated at different column temperatures. The solubility parameters (delta2) of the polymer were obtained by IGC technique. PMID:25255568

  13. Radiation grafting of acrylic and methacrylic acid to cellulose fibers to impart high water sorbency

    SciTech Connect

    Zahran, A.H.; Williams, J.L.; Stannett, V.T.

    1980-04-01

    Acrylic and methacrylic acids have been directly grafted to rayon and cotton using the preirradiation technique with /sup 60/ Co gamma rays. The rate of grafting increased with increasing temperature and monomer concentration, as did the final degree of grafting. The amount and rate of grafting also increased with the total irradiation dose but tended to level off at higher doses, in agreement with the leveling off of the radical content reported previously. Methacrylic acid grafted more and faster than acrylic acid to both rayon and cotton. Methacrylic acid grafted more with rayon than cotton, but acrylic acid gave somewhat similar yields with both fibers. The water abosrbency of the grafted fibers depended strongly on their posttreatment. Decrystallizing with 70% zinc chloride or with hot sodium hydroxidy developed supersorbency. The two treatments in succession, respectively, gave the highest values. Metacrylic acid brought about less sorbency than the corrsponding acrylic acid grafts. Useful levels of grafting and supersorbency could be readily and practically achieved by the methods described.

  14. Hypercalcemia secondary to granulomatous disease caused by the injection of methacrylate: a case series

    PubMed Central

    Negri, Armando Luis; Rosa Diez, Guillermo; Del Valle, Elisa; Piulats, Elsa; Greloni, Gustavo; Quevedo, Alejandra; Varela, Federico; Diehl, Maria; Bevione, Pablo

    2014-01-01

    Summary Association of dysregulated calcium homeostasis and granulomatous disease is well established. There exist reports in the literature of granulomatous reactions produced by silicones associated with hypercalcemia. In this case series we report four young women that underwent methacrylate injections in gluteus, thighs and calves that developed granulomas with posterior appearance of hypercalcemia. This complication presented as subacute around 6 months after the procedure. The four patients have as common elements the presence of moderate to severe renal insufficiency, suppressed PTH and elevated calcitriol levels for the degree of renal function. In the image studies, two patients presented in the nuclear magnetic resonance of the gluteus hypodense nodular images compatible with granulomas. Two patients had a positron emission tomography performed showing increased metabolic activity in the muscles of the gluteal region compatible with granulomas. Two patients had a partial surgical resection of the gluteal lesions with the finding of methacrylate associated to foreign body granulomas. In these patients hypercalcemia was treated with oral or local injections of corticoids, intravenous bisphosphonates or ketoconazole with good response. Although the prevalence of this complication with methacrylate injection is not common, hypercalcemia secondary to granulomas should be considered in the differential diagnosis of patients with hypercalcemia when there is a history of this procedure, and especially if they have a reduction in their renal function. PMID:25002879

  15. Synthesis of a Nanostructured Composite: Octakis(1-propyl-1H-1,2,3-triazole-4-yl(methyl 2-chlorobenzoate))octasilsesquioxane via Click Reaction.

    PubMed

    Ghodsi, Mohammadi Ziarani; Shakiba Nahad, Monireh; Lashgari, Negar; Alireza, Badiei

    2015-01-01

    Octakis(1-propyl-1H-1,2,3-triazole-4-yl(methyl 2-chlorobenzoate))octasilsesquioxanes as functionalized silsesquioxanes were synthesized via click reaction (copper-catalyzed Huisgen 1,3-dipolar cycloaddition reaction) between azidemoiety functionalized silsesquioxane and prop-2-ynyl 2-chlorobenzoate. The latter one was synthesized via the condensation reaction of propargyl alcohol and 2-chlorobenzoyl chloride in the presence of SBA-Pr-NH(2) (Santa Barbara Amorphous type material) as a nano basic catalyst. This approach provides a simple and convenient route to efficiently functionalize a wide range of new structures on the surface of silsesquioxanes. PMID:26454606

  16. Antimicrobial activity of some alkyl esters of gallic acid (3,4,5,-trihydroxybenzoic acid) against Escherichia coli NCTC 5933 with particular reference to n-propyl gallate.

    PubMed

    Boyd, L; Beveridge, E G

    1981-01-01

    The growth inhibitory and bactericidal activities of eight alkyl esters of gallic acid towards Escherichia coli NCTC 5933 have been determined. A previously suggested role for gallic acid and its esters as shikimate antimetabolites could not be substantiated. No induction of gross changes in cell morphology was observed. Bactericidal activity was accompanied only be very slight leakage of general ionic materials from the bacteria. Propyl gallate did not appear to uncouple oxidative phosphorylation from respiration as indicated by its failure to stimulate proton translocation across the cytoplasmic membrane.

  17. Preliminary study of propyl bromide exposure among New Jersey dry cleaners as a result of a pending ban on perchloroethylene.

    PubMed

    Blando, James D; Schill, Donald P; De La Cruz, Mary Pauline; Zhang, Lin; Zhang, Junfeng

    2010-09-01

    Many states are considering, and some states have actively pursued, banning the use of perchloroethylene (PERC) in dry cleaning establishments. Proposed legislation has led many dry cleaners to consider the use of products that contain greater than 90% n-propyl bromide (n-PB; also called 1-bromopropane or 1-BP). Very little information is known about toxicity and exposure to n-PB. Some n-PB-containing products are marketed as nonhazardous and "green" or "organic." This has resulted in some users perceiving the solvent as nontoxic and has resulted in at least one significant poisoning incident in New Jersey. In addition, many dry cleaning operators may not realize that the machine components and settings must be changed when converting from PERC to n-PB containing products. Not performing these modifications may result in overheating and significant leaks in the dry cleaning equipment. A preliminary investigation was conducted of the potential exposures to n-PB and isopropyl bromide (iso-PB; also called 2-bromopropane or 2-BP) among dry cleaners in New Jersey who have converted their machines from PERC to these new solvent products. Personal breathing zone and area samples were collected using the National Institute for Occupational Safety and Health Sampling and Analytical Method 1025, with a slight modification to gas chromatography conditions to facilitate better separation of n-PB from iso-PB. During the preliminary investigation, exposures to n-PB among some workers in two of three shops were measured that were greater than the American Conference of Governmental Industrial Hygienists (ACGIH) threshold limit value (TLV) for n-PB. The highest exposure measured among a dry cleaning machine operator was 54 parts per million (ppm) as an 8-hr time-weighted average, which is more than 5 times the ACGIH TLV of 10 ppm. The preliminary investigation also found that the work tasks most likely to result in the highest short-term exposures included the introduction of

  18. Development of dental restorative materials based on visible light-cured multi-methacrylates

    NASA Astrophysics Data System (ADS)

    Tiba, Amer

    The studies described in this dissertation focus on new visible light-curing (VLC) oligomers exhibiting low shrinkage, low water sorption, and improved mechanical properties. A family of multi-methacrylates, based on poly(isopropylidenediphenol) resin (BPA), was synthesized, characterized, and evaluated. The commercial BPA resin is prepared from enzymatic polymerization (oligomerization) of bisphenol A. The BPA resin, having an average of eight phenolic hydroxyl groups per molecule, was treated with propylene carbonate, and the resultant product, i.e., propoxylated BPA (PEBPA) oligomer, was confirmed by Fourier transform infrared spectroscopy (FT-IR) and sp{13}C nuclear magnetic resonance (NMR). The propoxylated BPA was subsequently treated with methacryloyl chloride to produce the multi-methacrylates, identified by FT-IR and NMR. The PEBPA oligomer multimethacrylate: triethylene glycol dimethacrylate (TEGDMA) (50:50/wt:wt) blends were combined with 0.5 wt. % camphoroquinone (CQ) and 1.0 wt. % N,N-dimethylaminoethyl methacrylate (DMAEMA). The control polymers were 2,2-bis(4-(2-hydroxy-3-methacryloyloxypropoxy)phenyl) propane (BisGMA): TEGDMA(50:50/wt:wt) blends having the same levels of CQ/DMAEMA. Differential photocalorimetry (DPC) and differential scanning calorimetry (DSC) showed these multimethacrylate/TEGDMA (neat resin) blends have polymerization characteristics comparable to the BisGMA/TEGDMA controls. These new multifunctional oligomers have lower polymerization shrinkage and lower uptake of water and other liquids, compared to BisGMA based materials. In addition, two experimental oligomers, PEBPA #2 and #3, have higher compressive strength than the BisGMA control. A biocompatibility test of the polymerized multi-methacrylate resins was performed and compared with the conventional BisGMA/TEGDMA resin and blank controls, using cell culture techniques. Human gingival fibroblasts were used for biocompatibility evaluation of these resins. The results revealed

  19. Developmental exposure to the organophosphorus flame retardant tris(1,3-dichloro-2-propyl) phosphate: estrogenic activity, endocrine disruption and reproductive effects on zebrafish.

    PubMed

    Wang, Qiangwei; Lam, James C W; Han, Jian; Wang, Xianfeng; Guo, Yongyong; Lam, Paul K S; Zhou, Bingsheng

    2015-03-01

    Tris(1,3-dichloro-2-propyl) phosphate (TDCPP) is an organophosphate flame retardant that is detectable in the environment and biota, prompting concern over its risk to wildlife and human health. Our objective was to investigate whether long-term exposure to low concentrations of TDCPP can affect fish reproduction. Zebrafish embryos were exposed to low concentrations (0, 4, 20 and 100μg/L) of TDCPP from 2h post-fertilization until sexual maturation. Exposure to TDCPP significantly increased plasma estradiol and testosterone levels in females, but had no effect in males. TDCPP exposure also caused a significant reduction in fecundity as indicated by decreased egg production. Real-time PCR was performed to examine selected genes in the hypothalamic-pituitary-gonadal (HPG) axis and liver. Principle component analysis (PCA) showed that sex hormone levels and fecundity were related to the mRNA level of several genes in the HPG axis. Furthermore, hepatic vitellogenin (vtg1 and vtg3) expression was upregulated in both females and males, suggesting TDCPP has estrogenic activity. Histological examination revealed promotion of oocyte maturation in the females, but retardation of spermiation in males. Reduced egg quality (e.g., egg diameter) and increased malformation rates were observed in the F1 generation. Chemical analysis showed significant levels of TDCPP and its metabolite bis(1,3-dichloro-2-propyl) phosphate in the gonads of males and females. In conclusion, long-term exposure to low concentrations of TDCPP impairs fish reproduction.

  20. Sequestering ability of butylated hydroxytoluene, propyl gallate, resveratrol, and vitamins C and E against ABTS, DPPH, and hydroxyl free radicals in chemical and biological systems.

    PubMed

    Soares, Daniele G; Andreazza, Ana C; Salvador, Mirian

    2003-02-12

    The antioxidant capacity of butylated hydroxytoluene (BHT; 2,6-di-tert-butyl-p-cresol), propyl gallate (3,4,5-trihydroxybenzoic acid n-propyl ester), resveratrol (trans-3,4',5-trihydroxystilbene), and vitamins C (l-ascorbic acid) and E [(+)-alpha-tocopherol] was studied in chemical and biological systems. The chemical assays evaluated the capacity of these antioxidants to sequester 2,2'-azinobis(3-ethylbenzthiazoline-6-sulfonic acid) (ABTS.) and 1,1 diphenyl-2-picrylhydrazyl (DPPH.). A new colorimetric method to determine hydroxyl radical scavenging is also described. The biological tests use the eucaryotic cells of Saccharomyces cerevisiae treated with the antioxidants in the presence of the stressing agents apomorphine, hydrogen peroxide, and paraquat dichloride (methylviologen; 1,1'-dimethyl-4,4'-bipyridinium dichloride). The results in chemical systems showed that all of the antioxidants were able to significantly inhibit the oxidation of beta-carotene by hydroxyl free radicals. The assays in yeast showed that the antioxidant activity of the tested compounds depended on the stressing agent used and the mechanism of action of the antioxidant.

  1. Increased complexity in interstellar chemistry: detection and chemical modeling of ethyl formate and n-propyl cyanide in Sagittarius B2(N)

    NASA Astrophysics Data System (ADS)

    Belloche, A.; Garrod, R. T.; Müller, H. S. P.; Menten, K. M.; Comito, C.; Schilke, P.

    2009-05-01

    Context: In recent years, organic molecules of increasing complexity have been found toward the prolific Galactic center source Sagittarius B2. Aims: We wish to explore the degree of complexity that the interstellar chemistry can reach in star-forming regions. Methods: We carried out a complete line survey of the hot cores Sgr B2(N) and (M) with the IRAM 30 m telescope in the 3 mm range, plus partial surveys at 2 and 1.3 mm. We analyzed this spectral survey in the local thermodynamical equilibrium approximation. We modeled the emission of all known molecules simultaneously, which allows us to search for less abundant, more complex molecules. We compared the derived column densities with the predictions of a coupled gas-phase and grain-surface chemical code. Results: We report the first detection in space of ethyl formate (C2H5OCHO) and n-propyl cyanide (C3H7CN) toward Sgr B2(N). The detection of n-propyl cyanide is based on refined spectroscopic parameters derived from combined analyses of available laboratory spectroscopic data. For each molecule, we identified spectral features at the predicted frequencies having intensities compatible with a unique rotation temperature. For an assumed source size of 3 arcsec, our modeling yields a column density of 5.4 × 1016 cm-2, a temperature of 100 K, and a linewidth of 7 km s-1 for ethyl formate. n-Propyl cyanide is detected with two velocity components having column densities of 1.5 × 1016 cm-2 and 6.6 × 1015 cm-2, respectively, for a source size of 3 arcsec, a temperature of 150 K, and a linewidth of 7 km s-1. The abundances of ethyl formate and n-propyl cyanide relative to H2 are estimated to be 3.6 × 10-9 and 1.0 × 10-9, respectively. We derived column density ratios of 0.8/15/1 for the related species t-HCOOH/CH3OCHO/C2H5OCHO and 108/80/1 for CH3CN/C2H5CN/C3H7CN. Our chemical modeling reproduces these ratios reasonably well. It suggests that the sequential, piecewise construction of ethyl and n-propyl cyanide from

  2. Photo-controlled binding of MutS to photo-caged DNA duplexes incorporating 4-O-(2-nitrobenzyl) or 4-O-[2-(2-nitrophenyl)propyl]thymidine.

    PubMed

    Seio, Kohji; Ohno, Yurie; Ohno, Kentaro; Takeshita, Leo; Kanamori, Takashi; Masaki, Yoshiaki; Sekine, Mitsuo

    2016-10-01

    Mismatch binding protein MutS binding to bulge structure in DNA duplexes was controlled by UV irradiation. 4-O-(2-Nitrobenzyl)thymidine or 4-O-[2-(2-nitrophenyl)propyl]thymidine was incorporated into DNA duplexes a bulged position. The MutS did not bind to the caged DNA duplexes but bound after removing the 2-nitrobenzyl or 2-(2-nitrophenyl)propyl group by photo-irradiation. By using photo-caged DNA duplex, we revealed that binding of MutS to the uncaged DNA downstream of the T7 RNA promoter weakly inhibited transcription by T7 RNA polymerase.

  3. Ultralight multiwalled carbon nanotube aerogel.

    PubMed

    Zou, Jianhua; Liu, Jianhua; Karakoti, Ajay Singh; Kumar, Amit; Joung, Daeha; Li, Qiang; Khondaker, Saiful I; Seal, Sudipta; Zhai, Lei

    2010-12-28

    Ultralight multiwalled carbon nanotube (MWCNT) aerogel is fabricated from a wet gel of well-dispersed pristine MWCNTs. On the basis of a theoretical prediction that increasing interaction potential between CNTs lowers their critical concentration to form an infinite percolation network, poly(3-(trimethoxysilyl) propyl methacrylate) (PTMSPMA) is used to disperse and functionalize MWCNTs where the subsequent hydrolysis and condensation of PTMSPMA introduces strong and permanent chemical bonding between MWCNTs. The interaction is both experimentally and theoretically proven to facilitate the formation of a MWCNT percolation network, which leads to the gelation of MWCNT dispersion at ultralow MWCNT concentration. After removing the liquid component from the MWCNT wet gel, the lightest ever free-standing MWCNT aerogel monolith with a density of 4 mg/cm(3) is obtained. The MWCNT aerogel has an ordered macroporous honeycomb structure with straight and parallel voids in 50-150 μm separated by less than 100 nm thick walls. The entangled MWCNTs generate mesoporous structures on the honeycomb walls, creating aerogels with a surface area of 580 m(2)/g which is much higher than that of pristine MWCNTs (241 m(2)/g). Despite the ultralow density, the MWCNT aerogels have an excellent compression recoverable property as demonstrated by the compression test. The aerogels have an electrical conductivity of 3.2 × 10(-2) S·cm(-1) that can be further increased to 0.67 S·cm(-1) by a high-current pulse method without degrading their structures. The excellent compression recoverable property, hierarchically porous structure with large surface area, and high conductivity grant the MWCNT aerogels exceptional pressure and chemical vapor sensing capabilities. PMID:21090673

  4. Ormocomp-modified glass increases collagen binding and promotes the adherence and maturation of human embryonic stem cell-derived retinal pigment epithelial cells.

    PubMed

    Käpylä, Elli; Sorkio, Anni; Teymouri, Shokoufeh; Lahtonen, Kimmo; Vuori, Leena; Valden, Mika; Skottman, Heli; Kellomäki, Minna; Juuti-Uusitalo, Kati

    2014-12-01

    In in vitro live-cell imaging, it would be beneficial to grow and assess human embryonic stem cell-derived retinal pigment epithelial (hESC-RPE) cells on thin, transparent, rigid surfaces such as cover glasses. In this study, we assessed how the silanization of glass with 3-aminopropyltriethoxysilane (APTES), 3-(trimethoxysilyl)propyl methacrylate (MAPTMS), or polymer-ceramic material Ormocomp affects the surface properties, protein binding, and maturation of hESC-RPE cells. The surface properties were studied by contact angle measurements, X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), and a protein binding assay. The cell adherence and proliferation were evaluated by culturing hESCRPE cells on collagen IV-coated untreated or silanized surfaces for 42 days. The Ormocomp treatment significantly increased the hydrophobicity and roughness of glass surfaces compared to the APTES and MAPTMS treatments. The XPS results indicated that the Ormocomp treatment changes the chemical composition of the glass surface by increasing the carbon content and the number of C-O/═O bonds. The protein-binding test confirmed that the Ormocomp-treated surfaces bound more collagen IV than did APTES- or MAPTMS-treated surfaces. All of the silane treatments increased the number of cells: after 42 days of culture, Ormocomp had 0.38, APTES had 0.16, MAPTMS had 0.19, and untreated glass had only 0.062, all presented as million cells cm(-2). There were no differences in cell numbers compared to smoother to rougher Ormocomp surfaces, suggesting that the surface chemistry and, more specifically, the collagen binding in combination with Ormocomp are beneficial to hESC-RPE cell culture. This study clearly demonstrates that Ormocomp treatment combined with collagen coating significantly increases hESC-RPE cell attachment compared to commonly used silanizing agents APTES and MAPTMS. Ormocomp silanization could thus enable the use of microscopic live cell imaging methods for h

  5. Development of a high-sensitivity immunoassay for amyloid-beta 1-42 using a silicon microarray platform.

    PubMed

    Gagni, Paola; Sola, Laura; Cretich, Marina; Chiari, Marcella

    2013-09-15

    In this work, we present a highly sensitive immunoassay for the detection of the Alzheimer's disease (AD) biomarker amyloid-beta 1-42 (Aβ42) based on a label/label-free microarray platform that utilises silicon/silicon oxide (Si/SiO2) substrates. Due to constructive interference, Si/SiO2 layered slides allow enhancement of the fluorescence intensity on the surface with significant improvements in sensitivity of detection. The same substrate allows the label-free multiplexed detection of targets using the Interferometric Reflectance Imaging Sensor (IRIS), a platform amenable to high-throughput detection of mass changes on microarray substrates. Silicon chips are coated with copoly(DMA-NAS-MAPS), a ter-copolymer made from dimethylacrylamide (DMA), 3-(trimethoxysilyl)propyl methacrylate (MAPS) and N-Acryloyloxy succinimide (NAS). Aβ42 aggregation was studied by circular dichroism (CD), and an optimal antibody pair was selected based on specificity of recognition, binding yield and spot morphology of the capture antibody on the coated silicon surface as analysed by IRIS. Finally, incubation conditions were optimised, and an unprecedented Aβ42 detection sensitivity of 73pg/mL was achieved using an artificial cerebrospinal fluid (CSF) sample. Because of their multiplexing capability, low volume sample consumption and efficient sample-to-result time for population-wide screening, microarrays are ideal tools for the identification of individuals with preclinical AD who are still cognitively healthy. The high sensitivity of this assay format, potentially coupled to a pre-concentration step or signal-enhancing modifications, could lead to a non-invasive, inexpensive diagnostic tool for population-wide screening of AD biomarkers in biological fluids other than CSF, such as serum or plasma. PMID:23624018

  6. Hot embossing and thermal bonding of poly(methyl methacrylate) microfluidic chips using positive temperature coefficient ceramic heater.

    PubMed

    Wang, Xia; Zhang, Luyan; Chen, Gang

    2011-11-01

    As a self-regulating heating device, positive temperature coefficient ceramic heater was employed for hot embossing and thermal bonding of poly(methyl methacrylate) microfluidic chip because it supplied constant-temperature heating without electrical control circuits. To emboss a channel plate, a piece of poly(methyl methacrylate) plate was sandwiched between a template and a microscopic glass slide on a positive temperature coefficient ceramic heater. All the assembled components were pressed between two elastic press heads of a spring-driven press while a voltage was applied to the heater for 10 min. Subsequently, the embossed poly(methyl methacrylate) plate bearing negative relief of channel networks was bonded with a piece of poly(methyl methacrylate) cover sheet to obtain a complete microchip using a positive temperature coefficient ceramic heater and a spring-driven press. High quality microfluidic chips fabricated by using the novel embossing/bonding device were successfully applied in the electrophoretic separation of three cations. Positive temperature coefficient ceramic heater indicates great promise for the low-cost production of poly(methyl methacrylate) microchips and should find wide applications in the fabrication of other thermoplastic polymer microfluidic devices.

  7. Effect of curing environment on mechanical properties and polymerizing behaviour of methyl-methacrylate autopolymerizing resin.

    PubMed

    Ogawa, T; Hasegawa, A

    2005-03-01

    Methyl-methacrylate autopolymerizing resin is used for multiple applications. Therefore, the mechanical properties of autopolymerizing resin should be assessed comprehensively including strength, stiffness and hardness. Any methods that effectively improve these mechanical properties are desirable. The objective of this study is to examine the effects of the curing environment: air or water with/without pressure, and air or water temperature during polymerization, on the strength, stiffness and hardness of autopolymerizing resin. In addition, we examined the polymerizing behaviour associated with the mechanical properties. Autopolymerizing methyl-methacrylate resin (Unifast II) was polymerized under the following conditions: in air and water with/without pressure at 10, 23, 30, 40, 60 and 80 degrees C. The resin specimens were subjected to a transverse test (three-point flexural test) and micro-Brinell surface hardness test. Fractured surfaces of the specimens after the transverse test were examined using a scanning electron microscope (SEM). The transverse strength and transverse modulus increased with increasing curing temperature in both wet and dry conditions. Pressured wet conditions increased transverse strength and transverse modulus over non-pressured wet and dry conditions. The resin polymerized in dry conditions showed higher surface hardness than the one polymerized in wet conditions at matching temperature. The SEM images of fractured surfaces cured at lower temperature exhibited porosity within the polymer base and cracks between the base and poly-methyl-methacrylate (PMMA) particulates. Surfaces of the resin polymerized in wet conditions were characterized with PMMA particulates having rougher surfaces suggestive of water incorporation. Raising temperature and pressuring during polymerization increase strength and stiffness of autopolymerizing resin. However, wet condition reduces surface hardness of resin compared with dry condition. These altered

  8. Flexural Strength Comparison of Silorane- and Methacrylate-Based Composites with Pre-impregnated Glass Fiber

    PubMed Central

    Doozandeh, Maryam; Alavi, Ali Asghar; Karimizadeh, Zahra

    2016-01-01

    Statement of the Problem Sufficient adhesion between silorane/methacrylate-based composites and methacrylate impregnated glass fiber increases the benefits of fibers and enhances the mechanical and clinical performance of both composites. Purpose The aim of this study was to evaluate the compatibility of silorane and methacrylate-based composites with pre-impregnated glass fiber by using flexural strength (FS) test. Materials and Method A total of 60 bar specimens were prepared in a split mold (25×2×2 mm) in 6 groups (n=10). In groups 1 and 4 (control), silorane-based (Filtek P90) and nanohybrid (Filtek Z350) composites were placed into the mold and photopolymerized with a high-intensity curing unit. In groups 2 and 5, pre-impregnated glass fiber was first placed into the mold and after two minutes of curing, the mold was filled with respective composites. Prior to filling the mold in groups 3 and 6, an intermediate adhesive layer was applied to the glass fiber. The specimens were stored in distilled water for 24 hours and then their flexural strength was measured by 3 point bending test, using universal testing machine at the crosshead speed of 1 mm/min. Two-way ANOVA and post-hoc test were used for analyzing the data (p< 0.05). Results A significant difference was observed between the groups (p< 0.05). The highest FS was registered for combination of Z350 composite, impregnated glass fiber, and application of intermediate adhesive layer .The lowest FS was obtained in Filtek P90 alone. Cohesive failure in composite was the predominant failure in all groups, except group 5 in which adhesive failure between the composite and fiber was exclusively observed. Conclusion Significant improvement in FS was achieved for both composites with glass fiber. Additional application of intermediate adhesive layer before composite build up seems to increase FS. Nanohybrid composite showed higher FS than silorane-based composite. PMID:27284555

  9. Utilization of Methacrylates and Polymer Matrices for the Synthesis of Ion Specific Resins

    SciTech Connect

    Czerwinski, Kenneth

    2013-10-29

    Disposal, storage, and/or transmutation of actinides such as americium (Am) will require the development of specific separation schemes. Existing efforts focus on solvent extraction systems for achieving suitable separation of actinide from lanthanides. However, previous work has shown the feasibility of ion-imprinting polymer-based resins for use in ion-exchange-type separations with metal ion recognition. Phenolic-based resins have been shown to function well for Am-Eu separations, but these resins exhibited slow kinetics and difficulties in the imprinting process. This project addresses the need for new and innovative methods for the selective separation of actinides through novel ion-imprinted resins. The project team will explore incorporation of metals into extended frameworks, including the possibility of 3D polymerized matrices that can serve as a solid-state template for specific resin preparation. For example, an anhydrous trivalent f-element chain can be formed directly from a metal carbonate, and methacrylic acid from water. From these simple coordination complexes, molecules of discrete size or shape can be formed via the utilization of coordinating ligands or by use of an anionic multi-ligand system incorporating methacrylate. Additionally, alkyl methyl methacrylates have been used successfully to create template nanospaces, which underscores their potential utility as 3D polymerized matrices. This evidence provides a unique route for the preparation of a specific metal ion template for the basis of ion-exchange separations. Such separations may prove to be excellent discriminators of metal ions, even between f-elements. Resins were prepared and evaluated for sorption behavior, column properties, and proton exchange capacity.

  10. Moleculary imprinted polymers with metalloporphyrin-based molecular recognition sites coassembled with methacrylic acid.

    PubMed

    Takeuchi, T; Mukawa, T; Matsui, J; Higashi, M; Shimizu, K D

    2001-08-15

    A diastereoselective molecularly imprinted polymer (MIP) for (-)-cinchonidine, PPM(CD), was prepared by the combined use of methacrylic acid and vinyl-substituted zinc(II) porphyrin as functional monomers. Compared to MIPs using only methacrylic acid or zinc porphyrin as a functional monomer, PM(CD) and PP(CD), respectively, PPM(CD) showed higher binding ability for (-)-cinchonidine in chromatographic tests using the MIP-packed columns. Scatchard analysis gave a higher association constant of PPM(CD) for (-)-cinchonidine (1.14 x 10(7) M(-1)) than those of PP(CD) (1.45 x 10(6) M(-1)) and PM(CD) (6.78 x 10(6) M(-1)). The affinity distribution of binding sites estimated by affinity spectrum analysis showed a higher percentage of high-affinity sites and a lower percentage of low-affinity sites in PPM(CD). The MIPs containing a zinc(II) porphyrin in the binding sites, PPM(CD) and PP(CD), showed fluorescence quenching according to the binding of (-)-cinchonidine, and the quenching was significant in the low-concentration range, suggesting that the high-affinity binding sites contain the porphyrin residue. The correlation of the relative fluorescence intensity against log of (-)-cinchonidine concentrations showed a linear relationship. These results revealed that the MIP having highly specific binding sites was assembled by the two functional monomers, vinyl-substituted zinc(II) porphyrin and methacrylic acid, and they cooperatively worked to yield the specific binding. In addition, the zinc(II) porphyrin-based MIPs appeared to act as fluorescence sensor selectively responded by binding events of the template molecule.

  11. Nano-engineered optical properties of iodine doped poly(methyl methacrylate)

    NASA Astrophysics Data System (ADS)

    Mehta, Sheetal; Keller, Jag Mohan; Das, Kallol

    2016-05-01

    Poly (methyl methacrylate) (PMMA) and Iodine hybrid matrixes have been prepared and characterized. The optical properties of the prepared I-PMMA hybrid composites were characterized by linear absorption studies and these composites have been found to contain embedded Iodine nanoparticles. The size of the nanoparticles was found to be a function of the Iodine content of PMMA. Refractive index measurements were undertaken for different wavelengths. The results showed that the refractive index of the composite is dependent on thermal annealing and also varies nonlinearly with the doping concentration at low Iodine concentration or in the region of nanoparticles formation.

  12. Quantitative analysis of (styrene/acrylonitrile/methyl methacrylate) co-polymer systems by infrared resonance spectroscopy

    NASA Astrophysics Data System (ADS)

    Jalbout, Abraham F.; Jiang, Tao; Fengqi, Liu; Ding, C.; Darwish, Abdalla M.

    2002-02-01

    A detailed careful analysis of the infrared resonance (IR) spectra of polystyrene (PSt), polymethyl methacrylate (PMMA), polyacrylonitrile (PAN) and their co-mixtures were performed. Through this study the absorption peak area to weight ratios as well as working curves were obtained to test for their reliability as well as their suitability. Satisfactory results were achieved and these working curves were then used to measure the polymerized components of binary and ternary co-polymers. By investigating the acquired data we conclude that the monomer preferential polymeric sequence is St>MMA>AN. A quantitative method to measure P (St/AN/MMA) concentrations by IR spectroscopy is proposed in this work.

  13. Vibrational overtone enhancement of methyl methacrylate polymerization initiated by benzoyl peroxide decomposition

    NASA Astrophysics Data System (ADS)

    Grinevich, Oleg; Snavely, D. L.

    1997-03-01

    Vibrational overtone initiated polymerization has been demonstrated using intracavity photolysis of a benzoyl peroxide/methyl methacrylate mixture. Excitation of the 6 νCH overtone transition of the ground electronic state of benzoyl peroxide creates radicals which subsequently begin the polymerization process. Polymer yield was monitored by comparison of the 2 νCH overtone absorptions for the methyl, methylenic and olefinic CH stretches at 5946 and 6170 cm -1, respectively. Plots of polymer yield versus time demonstrate an autoacceleration of the polymerization rate commencing many hours after the photolysis period. The delay before autoacceleration depends on the duration of the photolysis.

  14. Microstructure-property relationships in alumina trihydrate filled poly (methyl methacrylate) composite materials

    NASA Astrophysics Data System (ADS)

    Zhang, Ruoyu

    2015-07-01

    The mechanical properties (Young's modulus and fracture toughness) of composite made from a poly (methyl methacrylate) (PMMA) matrix filled with alumina trihydrate(ATH) are reported. The experiments were performed using flexural tests and single edge notched bend (SENB) tests. The composites samples were tested at a range of filler volume fractions (34.7%, 39.4% and 44.4%) and mean filler diameters (8 pm, 15 pm and 25 pm). The data of Young's modulus agreed well with the results of Lielens model and finite element analysis (FEA) model.

  15. Properties of cellulase as template molecule on chitosan—methyl methacrylate membrane

    NASA Astrophysics Data System (ADS)

    Lian, Qi; Zheng, Xuefang; Wu, Haixia; Song, Shitao; Wang, Dongjun

    2015-12-01

    In this study, a novel molecular imprinting membrane made of chitosan and methyl methacrylate (MMA) was fabricated with cellulase as template molecule and the thermal response to cellulase was characterized. The film was characterized by infrared spectroscopy (IR), X-ray diffraction (XRD), scanning electron microscopy (SEM) and the permeation experiment. The results showed that the space structure of the film was as similar as the cellulase. Moreover, the membrane had advanced molecular imprinting capability to cellulase comparing to pepsin and pectinase at any temperature and the film had excellent ability to identify specific template molecule (cellulase) at the synthesis temperature compared to other temperatures.

  16. Fracture resistance of Kevlar-reinforced poly(methyl methacrylate) resin: a preliminary study.

    PubMed

    Berrong, J M; Weed, R M; Young, J M

    1990-01-01

    The reinforcing effect of Kevlar fibers incorporated in processed poly(methyl methacrylate) resin samples was studied using 0% (controls), 0.5%, 1%, and 2% by weight of the added fibers. The samples were subjected to impact testing to determine fracture resistance, and sample groups were statistically compared using an ANOVA. Each reinforced sample had significantly greater fracture resistance (P less than 0.05) than the control, and no difference was found either within or between control groups. The use of reinforcing Kevlar fibers appears to enhance the fracture resistance of acrylic resin denture base materials.

  17. In-situ photopolymerization of monodisperse and discoid oxidized methacrylated alginate microgels in a microfluidic channel

    DOE PAGES

    Wang, Shuo; Jeon, Oju; Shankles, Peter G.; Liu, Yuan; Alsberg, Eben; Retterer, Scott T.; Lee, Bruce P.; Choi, Chang Kyoung

    2016-02-03

    Here, we present a simple microfluidic technique to in-situ photopolymerize (by 365 nm ultraviolet) monodisperse oxidized methacrylated alginate (OMA) microgels using a photoinitiator (VA-086). By this technique, we generated monodisperse spherical OMA beads and discoid non-spherical beads with better shape consistency than ionic crosslinking methods do. We found that a high monomer concentration (8 w/v %), a high photoinitiator concentration (1.5 w/v %) and absence of oxygen are critical factors to cure OMA microgels. This photopolymerizing method is an alternative to current methods to form alginate microgels and is a simpler approach to generate non-spherical alginate microgels.

  18. Novel synthesis of cellulose-based diblock copolymer of poly(hydroxyethyl methacrylate) by mechanochemical reaction.

    PubMed

    Ohura, Takeshi; Tsutaki, Yusaku; Sakaguchi, Masato

    2014-01-01

    The mechanical fracture of polymer produces polymeric free radical chain-ends, by which liner block copolymers have been synthesized. A diblock copolymer of microcrystalline cellulose (MCC) and poly 2-hydroxyethyl methacrylate (pHEMA) was produced by the mechanochemical polymerization under vacuum and room temperature. The fraction of pHEMA in MCC-block-pHEMA produced by the mechanochemical polymerization increased up to 21 mol% with increasing fracture time (~6 h). Then, the tacticities of HEMA sequences in MCC-block-pHEMA varied according to the reaction time. In the process of mechanochemical polymerization, cellulose could play the role of a radical polymerization initiator capable of controlling stereoregularity.

  19. Positronium Formation Of Glyeisdyl Methacrylic Acid (GMA)/Styrene Grafted On PVDF Membrane For Fuel Cells

    SciTech Connect

    Abdel-Hady, E. E.; Abdel-Hamed, M. O.; Eltonny, M. M.

    2011-06-01

    Simultaneous gamma irradiation was used effectively for grafting of glycidyl methacrylic acid and styrene onto Poly vinyldine fluoride (PVDF). Membranes were characterized by thermal gravimetric analysis (TGA) and scanning electron microscopy (SEM). The properties of the obtained membranes were evaluated in terms of proton conductivity, methanol permeability and positron annihilation lifetime (PALS) parameters. The high probability of Positronium formation enables the application of PALS to the study of free volume. Good property values approved the applicability of the membrane from the cost benefit point of view.

  20. Effects of preheating on the properties of silorane- and methacrylate-based composites.

    PubMed

    Dickson, Peggy L; Vandewalle, Kraig S; Lien, Wen; Wajdowicz, Michael N; Santos, Maria

    2014-01-01

    This study evaluated how preheating affected the properties of a silorane-based composite restorative material and 4 methacrylate-based composites. Viscosity, compressive strength, depth of cure, and polymerization shrinkage were examined. Data were analyzed with a 2-way ANOVA per physical property and composite type. With the exception of the flowable composite, significant reductions in viscosity were found between all preheated and room temperature composites, with no significant difference in other properties. In general, preheating the restorative composites decreased viscosity, but did not affect compressive strength, depth of cure, or shrinkage per composite type.

  1. Thermal response of polystyrene/poly methyl methacrylate (PS/PMMA) polymeric blends

    NASA Astrophysics Data System (ADS)

    Mathur, Vishal; Sharma, Kananbala

    2016-02-01

    The present paper reports the investigationsto evaluate thermal behavior of polystyrene/poly methyl methacrylate (PS/PMMA) polymeric blends, prepared at different compositions through solution casting method. The glass transition temperatures have been obtained using dynamic mechanical analyzer. Simultaneous measurements of temperature dependentthermal transport properties (thermal conductivity and thermal diffusivity) have been made using Hot Disk Thermal Constants Analyzer based on transient plane source. The study reveals that blending of PS with PMMA leads to different phase morphologies corresponding to different composition range which further affects the thermal performance of respective blends.

  2. Structure/property relationships in methacrylate/dimethacrylate polymers for dental applications

    NASA Astrophysics Data System (ADS)

    Mehlem, Jeremy John

    Since its invention Bis-GMA or one of its analogs has been the main component of the polymer portion of composites for dental restorations. The need for dilution of Bis-GMA and its analogs to optimize its properties has long been recognized. Bis-GMA is a highly viscous monomer. This high viscosity leads to early vitrification, which limits conversion during cure. This viscosity also limits filler loading. Vitrification at low conversions leads to heterogeneous systems composed of low and high cross-link density phases. The low cross-link density phases behave as defects in the system; therefore, if the amount of low cross-link density phases in the system can be reduced and a more uniform network structure can be achieved, then the mechanical properties of the resin can be improved. Since the increase in viscosity during cure causes vitrification, it is logical that a system with a low initial viscosity will delay the onset of vitrification. Reactive diluents such as triethylene glycol dimethacrylate (TEGDMA) are effective at lower levels. However, large amounts negatively affect matrix properties by increasing polymerization shrinkage and water sorption. Shrinkage has been cited as one of the main deficiencies in dental composites. The goal of this project is to improve upon standard viscosity modifying comonomers such as triethylene glycol dimethacrylate. The comonomers that were explored were phenyloxyethyl methacrylate, cyclohexyl methacrylate, and tert-butylcylcohexyl methacrylate. Multicomponent systems based on analogs of ethylene glycol dimethacrylates with different length ethyl glycol chains were also examined. The substitution of monomethacrylates for TEGDMA as a comonomer resulted in enhanced or negligible affects on the mechanical properties of Bis-MEPP based polymer systems while reducing polymerization shrinkage. 129Xenon NMR and TappingMode(TM) AFM were used to characterize the heterogeneity of dimethacrylates systems during their cure cycle as well

  3. Amine functionalization of cellulose surface grafted with glycidyl methacrylate by γ-initiated RAFT polymerization

    NASA Astrophysics Data System (ADS)

    Barsbay, Murat; Güven, Olgun; Kodama, Yasko

    2016-07-01

    This study presents the functionalization of poly(glycidyl methacrylate) (PGMA) grafted cellulose filter paper by a model compound, ethylenediamine (EDA), through the epoxy groups of PGMA. Cellulose based copolymers were prepared via the radiation-induced and RAFT-mediated graft polymerization. The samples were characterized by ATR-FTIR spectroscopy, X-ray photoelectron spectroscopy (XPS), elemental analysis, contact angle measurements and scanning electron microscopy (SEM). An efficient modification density of around 1 mmol EDA/mg copolymer was attained within ca. 8 h, indicating that chemical composition of well-defined copolymers may further be tuned by appropriately selecting the reactive agents for use in many emerging fields.

  4. Grafting of Methacrylonitrile and Ethyl Methacrylate onto Jute Fibre: Physico-chemical Characteristics of Grafted Jute

    NASA Astrophysics Data System (ADS)

    Mondal, Md. Ibrahim H.; Islam Farouqui, Faisul; Abu Hanif, Md.; Shafiur Rahman, G. M.; Asadul Hoque, Md.

    2005-10-01

    Modification of bleached jute fibre was done by graft co-polymerization with vinyl monomers e.g. methacrylonitrile and ethyl methacrylate, in aqueous medium using H2O2-Na2S2O3 as redox initiators. To make the process efficient, the optimized polymerization condition was established. The maximum percent grafting and grafting efficiency obtained at optimum grafting condition were 11.3 and 20.4% for MAN, respectively and that of 17.6 and 27.5% for EMA. Modification of bleached jute fibre with MAN and EMA reduced the loss in breaking strength and the yellowing on exposure to sunlight in air.

  5. Controlling of optical energy gap of Co-ferrite quantum dots in poly (methyl methacrylate) matrix

    NASA Astrophysics Data System (ADS)

    El-Sayed, H. M.; Agami, W. R.

    2015-07-01

    Different crystallite sizes of Co-ferrite nanoparticles were prepared and dispersed in the matrix of poly (methyl methacrylate) (PMMA) polymer. The effect of crystallite size on the structure and optical energy gap of Co-nanoferrite/PMMA composite has been studied. The optical energy gap of Co-ferrite was greatly affected by the crystallite size. This result was discussed in terms of the formation of electron-hole exciton using particle in a box model. The effective mass and the Bohr radius of the formed exciton have been calculated from the spectroscopic measurements.

  6. Far infrared-assisted encapsulation of filter paper strips in poly(methyl methacrylate) for proteolysis.

    PubMed

    Chen, Qiwen; Bao, Huimin; Zhang, Luyan; Chen, Gang

    2016-02-01

    Filter paper strips were enclosed between two poly(methyl methacrylate) plates to fabricate paper-packed channel microchips under pressure in the presence of far infrared irradiation. After the enclosed paper strip was oxidized by periodate, trypsin was covalently immobilized in them to fabricate microfluidic proteolysis bioreactor. The feasibility and performance of the unique bioreactor were demonstrated by digesting BSA and lysozyme. The results were comparable to those of conventional in-solution proteolysis while the digestion time was significantly reduced to ∼18 s. The suitability of the microfluidic paper-based bioreactors to complex proteins was demonstrated by digesting human serum.

  7. Generalized peripheral neuropathy in a dental technician exposed to methyl methacrylate monomer

    SciTech Connect

    Donaghy, M.; Rushworth, G.; Jacobs, J.M. )

    1991-07-01

    A 58-year-old dental prosthetic technician developed generalized sensorimotor peripheral neuropathy. Neurophysiologic studies showed a generalized sensorimotor neuropathy of axonal degeneration type. Examination of a sural nerve biopsy showed a moderately severe axonal neuropathy with loss of large myelinated fibers and unmyelinated axons. There was evidence of slow ongoing degeneration and considerable fiber regeneration. Electron microscopy showed increased numbers of filaments in a few fibers. These findings show resemblances to the nerve changes caused by another acrylic resin, acrylamide. They suggest that the neuropathy may have been caused by 30 years of occupational cutaneous and inhalational exposure to methyl methacrylate monomer since they excluded other recognized causes of neuropathy.

  8. Synthesis and swelling behavior of Protein-g-poly Methacrylic acid/kaolin superabsorbent hydrogel composites

    NASA Astrophysics Data System (ADS)

    Sadeghi, Mohammad

    2008-08-01

    A novel superabsorbent hydrogel composite based on Collagen have been prepared via graft copolymerization of Methacrylic acid (MAA) in the presence of kaolin powder using methylenebisacrylamide (MBA) as a crosslinking agent and ammonium persulfate (APS) as an initiator. The composite structure was confirmed using FTIR spectroscopy. A new absorption band at 1728 cm-1 in the composite spectrum confirmed kaolin-organic polymer linkage. The effect of kaolin amount and MBA concentration showed that with increasing of these parameters, the water absorbency of the superabsorbent composite was decreased. The swelling measurements of the hydrogels were conducted in aqueous salt solutions.

  9. Temperature dependence properties of holographic gratings in phenanthrenquinone doped poly(methyl methacrylate) photopolymers.

    PubMed

    Russo, Juan Manuel; Kostuk, Raymond K

    2007-10-20

    We examine the temperature dependence of edge-illuminated holographic filters formed in phenanthrenquinone doped poly(methyl methacrylate) (PQ/PMMA) operating at 1550 nm. It was found that the thermally induced change to the refractive index and volume can be used to select the wavelength filtered by the grating. The temperature can be varied over a range of 15 degrees C without introducing noticeable hysteresis effects. The wavelength can be tuned at a rate of 0.03 nm/degrees C over this temperature range. A model for the temperature tuning effect is presented and compared to experimental results.

  10. Supported nickel bromide catalyst for atom transfer radical polymerization (ATRP) of methyl methacrylate.

    PubMed

    Duquesne, E; Degée, Ph; Habimana, J; Dubois, Ph

    2004-03-21

    A new supported catalytic system, i.e. nickel bromide catalyst ligated by triphenylphosphine (TPP) ligands immobilized onto crosslinked polystyrene resins (PS-TPP) is reported. Per se, this catalyst does not allow any control over the polymerization of methyl methacrylate (MMA) initiated by ethyl 2-bromoisobutyrate but, in the presence of a given amount of purposely added free TPP, it promotes controlled ATRP of MMA. Indeed colorless PMMA chains of low polydispersity indices are readily recovered, the molecular weight of which linearly increases with monomer conversion and agrees with the expected values. Recycling of the supported catalyst is evidenced and does not prevent the polymerization from being controlled. PMID:15010758

  11. Viscoelastic properties of polycarbonate, poly(methyl methacrylate) and their nanocomposites via nanoindentation experiments

    NASA Astrophysics Data System (ADS)

    Noll, Kenneth; Wong, Maranda; Evke, Erin; Rende, Deniz; Ozisik, Rahmi

    2014-03-01

    Polycarbonate, PC, and poly(methyl methacrylate), PMMA, are economic alternatives to glass mainly die to their mecahnical and optical properties. The uses of PC and PMMA can be expanded if their impact response and scratch resistance are improved. Carbon nanotubes are known to increase the toughness of PMMA and improve its resistance impact forces. In the current study, the viscoelastic properties of PC, PMMA and their nanocomposites were investigated via nanoindentation experiments. Stress relaxation experiments were performed under various loading rates._ The material is partially based upon work supported by NSF under Grant Nos. 1200270 and 1003574.

  12. Aquatic toxicity of acrylates and methacrylates: quantitative structure-activity relationships based on Kow and LC50

    SciTech Connect

    Reinert, K.H.

    1987-12-01

    Recent EPA scrutiny of acrylate and methacrylate monomers has resulted in restrictive consent orders and Significant New Use Rules under the Toxic Substances Control Act, based on structure-activity relationships using mouse skin painting studies. The concern is centered on human health issues regarding worker and consumer exposure. Environmental issues, such as aquatic toxicity, are still of concern. Understanding the relationships and environmental risks to aquatic organisms may improve the understanding of the potential risks to human health. This study evaluates the quantitative structure-activity relationships from measured log Kow's and log LC50's for Pimephales promelas (fathead minnow) and Carassius auratus (goldfish). Scientific support of the current regulations is also addressed. Two monomer classes were designated: acrylates and methacrylates. Spearman rank correlation and linear regression were run. Based on this study, an ecotoxicological difference exists between acrylates and methacrylates. Regulatory activities and scientific study should reflect this difference.

  13. 40 CFR 180.1065 - 2-Amino-4,5-dihydro-6-methyl-4-propyl-s-triazolo(1,5-alpha)pyrimidin-5-one; exemption from the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ...-s-triazolo(1,5-alpha)pyrimidin-5-one; exemption from the requirement of a tolerance. 180.1065...-Amino-4,5-dihydro-6-methyl-4-propyl-s-triazolo(1,5-alpha)pyrimidin-5-one; exemption from the requirement of a tolerance. The inert ingredient,...

  14. 40 CFR 180.1065 - 2-Amino-4,5-dihydro-6-methyl-4-propyl-s-triazolo(1,5-alpha)pyrimidin-5-one; exemption from the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ...-s-triazolo(1,5-alpha)pyrimidin-5-one; exemption from the requirement of a tolerance. 180.1065...-Amino-4,5-dihydro-6-methyl-4-propyl-s-triazolo(1,5-alpha)pyrimidin-5-one; exemption from the requirement of a tolerance. The inert ingredient,...

  15. 40 CFR 180.1065 - 2-Amino-4,5-dihydro-6-methyl-4-propyl-s-triazolo(1,5-alpha)pyrimidin-5-one; exemption from the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ...-s-triazolo(1,5-alpha)pyrimidin-5-one; exemption from the requirement of a tolerance. 180.1065...-Amino-4,5-dihydro-6-methyl-4-propyl-s-triazolo(1,5-alpha)pyrimidin-5-one; exemption from the requirement of a tolerance. The inert ingredient,...

  16. Crystal structure of 2-[2-(hy­droxy­imino)-1-phenyl­propyl­idene]-N-phen­ylhydrazinecarbo­thio­amide

    PubMed Central

    Anderson, Brian J.; Freedman, Michael B.; Millikan, Sean P.; Smolenski, Victoria A.; Jasinski, Jerry P.

    2015-01-01

    In the title compound, C16H16N4OS, an intra­molecular C—H⋯S hydrogen bond is observed. With the exception of the phenyl ring of the phenyl­propyl­idene unit, the remainder of the mol­ecule has an almost planar skeleton with an r.m.s. deviation of 0.121 (5) Å from the plane through the remaining 16 atoms. In the crystal O—H⋯N hydrogen bonds are observed between the terminal hy­droxy­imino groups, forming inverson dimers with R 2 2(6) graph-set motifs. Additional C—H⋯N contacts stack the dimers along [100]. While no π—π inter­actions are present, weak C—H⋯O and O—H⋯Cg inter­actions are also observed and help stabilize the crystal packing. PMID:26594484

  17. β-Cyclodextrin-Propyl Sulfonic Acid Catalysed One-Pot Synthesis of 1,2,4,5-Tetrasubstituted Imidazoles as Local Anesthetic Agents.

    PubMed

    Ran, Yan; Li, Ming; Zhang, Zong-Ze

    2015-11-12

    Some functionalized 1,2,4,5-tetrasubstituted imidazole derivatives were synthesized using a one-pot, four component reaction involving 1,2-diketones, aryl aldehydes, ammonium acetate and substituted aromatic amines. The synthesis has been efficiently carried out in a solvent free medium using β-cyclodextrin-propyl sulfonic acid as a catalyst to afford the target compounds in excellent yields. The local anesthetic effect of these derivatives was assessed in comparison to lidocaine as a standard using a rabbit corneal and mouse tail anesthesia model. The three most potent promising compounds were subjected to a rat sciatic nerve block assay where they showed considerable local anesthetic activity, along with minimal toxicity. Among the tested analogues, 4-(1-benzyl-4,5-diphenyl-1H-imidazol-2-yl)-N,N-dimethylaniline (5g) was identified as most potent analogue with minimal toxicity. It was further characterized by a more favourable therapeutic index than the standard.

  18. β-Cyclodextrin-Propyl Sulfonic Acid Catalysed One-Pot Synthesis of 1,2,4,5-Tetrasubstituted Imidazoles as Local Anesthetic Agents.

    PubMed

    Ran, Yan; Li, Ming; Zhang, Zong-Ze

    2015-01-01

    Some functionalized 1,2,4,5-tetrasubstituted imidazole derivatives were synthesized using a one-pot, four component reaction involving 1,2-diketones, aryl aldehydes, ammonium acetate and substituted aromatic amines. The synthesis has been efficiently carried out in a solvent free medium using β-cyclodextrin-propyl sulfonic acid as a catalyst to afford the target compounds in excellent yields. The local anesthetic effect of these derivatives was assessed in comparison to lidocaine as a standard using a rabbit corneal and mouse tail anesthesia model. The three most potent promising compounds were subjected to a rat sciatic nerve block assay where they showed considerable local anesthetic activity, along with minimal toxicity. Among the tested analogues, 4-(1-benzyl-4,5-diphenyl-1H-imidazol-2-yl)-N,N-dimethylaniline (5g) was identified as most potent analogue with minimal toxicity. It was further characterized by a more favourable therapeutic index than the standard. PMID:26569210

  19. 6-Propyl-2-thiouracil versus 6-methoxymethyl-2-thiouracil: enhancing the hydrogen-bonded synthon motif by replacement of a methylene group with an O atom.

    PubMed

    Hützler, Wilhelm Maximilian; Egert, Ernst; Bolte, Michael

    2016-08-01

    The understanding of intermolecular interactions is a key objective of crystal engineering in order to exploit the derived knowledge for the rational design of new molecular solids with tailored physical and chemical properties. The tools and theories of crystal engineering are indispensable for the rational design of (pharmaceutical) cocrystals. The results of cocrystallization experiments of the antithyroid drug 6-propyl-2-thiouracil (PTU) with 2,4-diaminopyrimidine (DAPY), and of 6-methoxymethyl-2-thiouracil (MOMTU) with DAPY and 2,4,6-triaminopyrimidine (TAPY), respectively, are reported. PTU and MOMTU show a high structural similarity and differ only in the replacement of a methylene group (-CH2-) with an O atom in the side chain, thus introducing an additional hydrogen-bond acceptor in MOMTU. Both molecules contain an ADA hydrogen-bonding site (A = acceptor and D = donor), while the coformers DAPY and TAPY both show complementary DAD sites and therefore should be capable of forming a mixed ADA/DAD synthon with each other, i.e. N-H...O, N-H...N and N-H...S hydrogen bonds. The experiments yielded one solvated cocrystal salt of PTU with DAPY, four different solvates of MOMTU, one ionic cocrystal of MOMTU with DAPY and one cocrystal salt of MOMTU with TAPY, namely 2,4-diaminopyrimidinium 6-propyl-2-thiouracilate-2,4-diaminopyrimidine-N,N-dimethylacetamide-water (1/1/1/1) (the systematic name for 6-propyl-2-thiouracilate is 6-oxo-4-propyl-2-sulfanylidene-1,2,3,6-tetrahydropyrimidin-1-ide), C4H7N4(+)·C7H9N2OS(-)·C4H6N4·C4H9NO·H2O, (I), 6-methoxymethyl-2-thiouracil-N,N-dimethylformamide (1/1), C6H8N2O2S·C3H7NO, (II), 6-methoxymethyl-2-thiouracil-N,N-dimethylacetamide (1/1), C6H8N2O2S·C4H9NO, (III), 6-methoxymethyl-2-thiouracil-dimethyl sulfoxide (1/1), C6H8N2O2S·C2H6OS, (IV), 6-methoxymethyl-2-thiouracil-1-methylpyrrolidin-2-one (1/1), C6H8N2O2S·C5H9NO, (V), 2,4-diaminopyrimidinium 6-methoxymethyl-2-thiouracilate (the systematic name for 6-methoxymethyl-2

  20. Diaqua-bis-(dihydrogen 3-aza-niumyl-1-hy-droxy-propyl-idene-1,1-di-phos-phon-ato-κO,O')cobalt(II).

    PubMed

    Tsaryk, Natalia V; Dudko, Anatolij V; Kozachkova, Alexandra N; Pekhnyo, Vasily I

    2011-12-01

    The asymmetric unit of title compound, [Co(C(3)H(10)NO(7)P(2))(2)(H(2)O)(2)], contains one half-mol-ecule of the complex. The Co(II) atom is located on an inversion centre and displays a distorted octa-hedral coordination geometry defined by four O atoms of two 3-aza-niumyl-1-hy-droxy-propyl-idene-1,1-bis-phospho-nato ligands in the equatorial plane and two water mol-ecules located in axial positions. The ligand mol-ecules, which exist in a zwitterionic state, form two six-membered chelate rings with chair conformations. In the crystal, mol-ecules are inter-linked by O-H⋯O and N-H⋯O hydrogen bonds, forming a three-dimensional supra-molecular structure. PMID:22199511

  1. Chemically induced graft copolymerization of 2-hydroxyethyl methacrylate onto polyurethane surface for improving blood compatibility

    NASA Astrophysics Data System (ADS)

    He, Chunli; Wang, Miao; Cai, Xianmei; Huang, Xiaobo; Li, Li; Zhu, Haomiao; Shen, Jian; Yuan, Jiang

    2011-11-01

    To improve hydrophilicity and blood compatibility properties of polyurethane (PU) film, we chemically induced graft copolymerization of 2-hydroxyethyl methacrylate (HEMA) onto the surface of polyurethane film using benzoyl peroxide as an initiator. The effects of grafting temperature, grafting time, monomer and initiator concentrations on the grafting yields were studied. The maximum grafting yield value was obtained 0.0275 g/cm2 for HEMA. Characterization of the films was carried out by attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR), water contact angle measurements. ATR-FTIR data showed that HEMA was successfully grafted onto the PU films surface. Water contact angle measurement demonstrated the grafted films possessed a relatively hydrophilic surface. The blood compatibility of the grafted films was preliminarily evaluated by a platelet-rich plasma adhesion test and hemolysis test. The results of platelet adhesion experiment showed that polyurethane grafted polymerization with monomer of 2-hydroxyethyl methacrylate had good blood compatibility featured by the low platelet adhesion. Hemolysis rate of the PU-g-PHEMA films was dramatically decreased than the ungrafted PU films. This kind of new biomaterials grafted with HEMA monomers might have a potential usage for biomedical applications.

  2. Modulation of barnacle (Balanus amphitrite Darwin) cyprid settlement behavior by sulfobetaine and carboxybetaine methacrylate polymer coatings.

    PubMed

    Aldred, Nick; Li, Guozhu; Gao, Ye; Clare, Anthony S; Jiang, Shaoyi

    2010-08-01

    Zwitterionic polymers such as poly(sulfobetaine methacrylate) (polySBMA) and poly(carboxybetaine methacrylate) (polyCBMA) have demonstrated impressive fouling-resistance against proteins and mammalian cells. In this paper, the effects of these surface chemistries on the settlement and behavior of an ubiquitous fouling organism, the cypris larva of the barnacle Balanus amphitrite (=Amphibalanus amphitrite), were studied in the laboratory. Conventional settlement assays and behavioral analysis of cyprids using Noldus Ethovision 3.1 demonstrated significant differences in settlement and behavior on different surfaces. Cyprids did not settle on the polySBMA or polyCBMA surfaces over the course of the assay, whereas settlement on glass occurred within expected limits. Individual components of cyprid behavior were shown to differ significantly between glass, polySBMA and polyCBMA. Cyprids also responded differently to the two zwitterionic surfaces. On polySBMA, cyprids were unwilling or unable to settle, whereas on polyCBMA cyprids did not attempt exploration and left the surface quickly. In neither case was toxicity observed. It is concluded that a zwitterionic approach to fouling-resistant surface development has considerable potential in marine applications. PMID:20658383

  3. Photoinitiated chemical vapor deposition of cytocompatible poly(2-hydroxyethyl methacrylate) films.

    PubMed

    McMahon, Brian J; Pfluger, Courtney A; Sun, Bing; Ziemer, Katherine S; Burkey, Daniel D; Carrier, Rebecca L

    2014-07-01

    Poly(2-hydroxyethyl methacrylate) (pHEMA) is a widely utilized biomaterial due to lack of toxicity and suitable mechanical properties; conformal thin pHEMA films produced via chemical vapor deposition (CVD) would thus have broad biomedical applications. Thin films of pHEMA were deposited using photoinitiated CVD (piCVD). Incorporation of ethylene glycol diacrylate (EGDA) into the pHEMA polymer film as a crosslinker, confirmed via Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy, resulted in varied swelling and degradation behavior. 2-Hydroxyethyl methacrylate-only films showed significant thickness loss (up to 40%), possibly due to extraction of low-molecular-weight species or erosion, after 24 h in aqueous solution, whereas films crosslinked with EGDA (9.25-12.4%) were stable for up to 21 days. These results differ significantly from those obtained with plasma-polymerized pHEMA, which degraded steadily over a 21-day period, even with crosslinking. This suggests that the piCVD films differ structurally from those fabricated via plasma polymerization (plasma-enhanced CVD). piCVD pHEMA coatings proved to be good cell culture materials, with Caco-2 cell attachment and viability comparable to results obtained on tissue-culture polystyrene. Thus, thin film CVD pHEMA offers the advantage of enabling conformal coating of a cell culture substrate with tunable properties depending on method of preparation and incorporation of crosslinking agents.

  4. Reaction of pectin and glycidyl methacrylate and ulterior formation of free films by reticulation.

    PubMed

    Maior, João Fhilype Andrade Souto; Reis, Adriano Valim; Muniz, Edvani C; Cavalcanti, Osvaldo Albuquerque

    2008-05-01

    In this work, low-methoxyl pectin was chemically modified by reaction with glycidyl methacrylate (GMA) to give a material with low hydrosolubility. After physio-chemical characterization by FT-IR, DSC, and TGA analyses, the methacrylated/modified pectin (Pect-GMA) was crosslinked after the addition of sodium persulfate (SP), that actuates as initiator, at 50 degrees C for 24 and 48h either in the presence or not of aqueous polymethacrylate dispersion (Eudragit RS 30 D) to obtain free films by Teflon plate "casting" process. Different Pect-GMA/Eudragit RS 30 D ratios and SP concentrations were used. The free films were characterized by the determination of water vapor transmission (WVT), the swelling index (Ieq%) in simulated gastric (SGF) and intestinal (SIF) fluids, and by scanning electron microscopy (SEM). The presence of ionized groups in Pect-GMA turned the films pH-dependent because Ieq% of swollen crosslinked Pect-GMA films was larger at pH 6.8 than at pH 1.2. This was confirmed by the large pore size observed in the micrographs of SIF-swollen lyophilized films. In this way, films containing Pect-GMA and Eudragit RS 30 D, a time-dependent polymer, may present a synergistic action that favors specific biodegradation of the film in distal end of the gastrointestinal tract (GIT) by enzymes produced by the colonic microflora, enabling the modification of the release kinetics of drugs.

  5. Effect of Nanoclay on Thermal Conductivity and Flexural Strength of Polymethyl Methacrylate Acrylic Resin

    PubMed Central

    Ghaffari, Tahereh; Barzegar, Ali; Hamedi Rad, Fahimeh; Moslehifard, Elnaz

    2016-01-01

    Statement of the Problem The mechanical and thermal properties of polymethyl methacrylate (PMMA) acrylic resin should be improved to counterweigh its structural deficiencies. Purpose The aim of this study was to compare the flexural strength and thermal conductivity of conventional acrylic resin and acrylic resin loaded with nanoclay. Materials and Method The methacrylate monomer containing the 0.5, 1 and 2 wt% of nanoclay was placed in an ultrasonic probe and mixed with the PMMA powder. Scanning electron microscopy was used to verify homogeneous distribution of particles. Twenty-four 20×20×200-mm cubic samples were prepared for flexural strength test; 18 samples containing nanoclay and 6 samples for the control group. Another 24 cylindrical samples of 38×25 mm were prepared for thermal conductivity test. One-way ANOVA was used for statistical analysis, followed by multiple-comparison test (Scheffé’s test). Statistical significance was set at p< 0.05. Results Increasing the concentration of nanoclay incorporated into the acrylic resin samples increased thermal conductivity but decreased flexural strength (p< 0.05). Conclusion Based on the results of this study, adding nanoclay particles to PMMA improved its thermal conductivity, while it had a negative effect on the flexural strength. PMID:27284557

  6. Cellulose nanocrystal-poly(oligo(ethylene glycol) methacrylate) brushes with tunable LCSTs.

    PubMed

    Grishkewich, Nathan; Akhlaghi, Seyedeh Parinaz; Zhaoling, Yao; Berry, Richard; Tam, Kam C

    2016-06-25

    This paper reports on the synthesis of poly(oligoethylene glycol) methyl ether acrylate (POEGMA) grafted cellulose nanocrystals (CNCs) via surface initiated atom transfer radical polymerization (ATRP). An ATRP initiator (α-Bromoisobutyryl bromide) was covalently bonded to the surface of CNCs, followed by copolymerizing di(ethylene glycol) methyl ether methacrylate (MEO2MA) and oligoethylene glycol methyl ether methacrylate (OEGMA300) monomers from the surface using Cu(I)Br/2,2-dipyridal. Multiple POEGMA-g-CNC systems with varying MEO2MA/OEGMA300 content were synthesized, and they displayed a range of lower critical solution temperatures (LCSTs) in aqueous medium. μDSC endotherms and microstructural analysis indicated the collapse of POEGMA chains, followed by the aggregation of nanoparticles above their LCSTs. Cloud point measurements demonstrated a hysteresis in the heating and cooling of the POEGMA-g-CNC systems. It was found that the LCST of the nanoparticles could be tuned to between 23.8 to 63.8°C by adjusting the OEGMA300 content of the POEGMA brushes. PMID:27083811

  7. Analyses of preservatives by capillary electrochromatography using methacrylate ester-based monolithic columns.

    PubMed

    Huang, Hsi-Ya; Chiu, Chen-Wen; Huang, I-Yun; Yeh, Jui-Ming

    2004-10-01

    Five common food preservatives were analyzed by capillary electrochromatography, utilizing a methacrylate ester-based monolithic capillary as separation column. In order to optimize the separation of these preservatives, the effects of the pore size of the polymeric stationary phase, the pH and composition of the mobile phase on separation were examined. For all analytes, it was found that an increase in pore size caused a reduction in retention time. However, separation performances were greatly improved in monolithic columns with smaller pore sizes. The pH of the mobile phase had little influence on separation resolution, but a dramatic effect on the amount of sample that was needed to be electrokinetically injected into the monolithic column. In addition, the retention behaviors of these analytes were strongly influenced by the level of acetonitrile in the mobile phase. An optimal separation of the five preservatives was obtained within 7.0 min with a pH 3.0 mobile phase composed of phosphate buffer and acetonitrile 35:65 v/v. Finally, preservatives in real commercial products, including cold syrup, lotion, wine, and soy sauces, were successfully determined by the methacrylate ester-based polymeric monolithic column under this optimized condition.

  8. Radiopacity of Methacrylate and Silorane Composite Resins Using a Digital Radiographic System

    PubMed Central

    Firoozmand, Leily Macedo; Cordeiro, Mariana Gonçalves; Da Silva, Marcos André dos Santos

    2016-01-01

    The aim of this study was to evaluate the radiopacity of silorane and methacrylate resin composites, comparing them to the enamel, dentin, and aluminum penetrometer using a digital image. From six resin composites (Filtek™ P90, Filtek Z350, Filtek Z350 XT flow, Tetric Ceram, TPH Spectrum, and SureFil SDR flow) cylindrical disks (5 × 1 mm) were made and radiographed by a digital method, together with a 15-step aluminum step-wedge and a 1 mm slice of human tooth. The degree of radiopacity of each image was quantified using digital image processing. The mean values of the shades of gray of the tested materials were measured and the equivalent width of aluminum was calculated for each resin. The results of our work yielded the following radiopacity values, given here in descending order: Tetric Ceram > TPH > SDR > Z350 > Z350 flow > P90 > enamel > dentin. The radiopacity of the materials was different both for the enamel and for the dentin, except for resin P90, which was no different than enamel. In conclusion, silorane-based resin exhibited a radiopacity higher than dentin and closest to the enamel; a large portion of the methacrylate-based flow and conventional resins demonstrated greater radiopacity in comparison to dentin and enamel. PMID:27722199

  9. Effect of Montmorillonite Modification on Ultra Violet Radiation Cured Nanocomposite Filled with Glycidyl Methacrylate Modified Kenaf

    NASA Astrophysics Data System (ADS)

    Rozyanty, A. R.; Rozman, H. D.; Zhafer, S. F.; Musa, L.; Zuliahani, A.

    2016-06-01

    In this study nanocomposite cured by ultra violet radiation, were produced using modified montmorillonite (MMT) as reinforcing agent, chemically modified kenaf bast fiber as filler and unsaturated polyester as the matrix. Kenaf bast fiber was chemically modified with glycidyl methacrylate (GMA) whilst MMT were modified with cetyl trimethyl ammonium bromide (CTAB) and glycidyl methacrylate (GMA). Fixed 12 percent of GMA modified kenaf bast fiber with different percentage (i.e., 1, 3 and 5) of unmodified and modified MMT loading was used to produce the composite. The performed of GMA reaction with hydroxyl group of cellulose in kenaf bast fiber was evaluated using Fourier Transform infrared (FTIR) spectroscopy. GMA-MMT filled composite showed higher mechanical properties than MMT and CTAB-MMT filled composite. However, the increase of MMT, CTAB-MMT and GMA- MMT loading resulted in the reduction of mechanical properties. Scanning electron microscopy (SEM) analysis showed the evidence of compatibility enhancement between MMT and kenaf bast fiber with unsaturated polyester matrix.

  10. Binding of leachable components of polymethyl methacrylate (PMMA) and peptide on modified SPR chip

    NASA Astrophysics Data System (ADS)

    Szaloki, M.; Vitalyos, G.; Harfalvi, J.; Hegedus, Cs

    2013-12-01

    Many types of polymers are often used in dentistry, which may cause allergic reaction, mainly methyl methacrylate allergy due to the leachable, degradable components of polymerized dental products. The aim of this study was to investigate the interaction between the leachable components of PMMA and peptides by Fourier-transform Surface Plasmon Resonance (FT SPR). In our previous work binding of oligopeptides (Ph.D.-7 and Ph.D.-12 Peptide Library Kit) was investigated to PMMA surface by phage display technique. It was found that oligopeptides bounded specifically to PMMA surface. The most common amino acids were leucine and proline inside the amino acids sequences of DNA of phages. The binding of haptens, as formaldehyde and methacrylic acid, to frequent amino acids was to investigate on the modified gold SPR chip. Self assembled monolayer (SAM) modified the surface of gold chip and ensured the specific binding between the haptens and amino acids. It was found that amino acids bounded to modified SPR gold and the haptens bounded to amino acids by creating multilayer on the chip surface. By the application of phage display and SPR modern bioanalytical methods the interaction between allergens and peptides can be investigated.

  11. Synthesis of methyl methacrylate from coal-derived syngas: Quarterly report,, October 1-December 31, 1997

    SciTech Connect

    1998-09-01

    Research Triangle Institute (RTI), Eastman Chemical Company, and Bechtel collectively are developing a novel process for the synthesis of methyl methacrylate (MMA) from coal-derived syngas that consists of three steps of synthesis of a propionate, its condensation with formaldehyde, and esterification of resulting methacrylic acid (MAA) with methanol to produce MMA. Over the last quarter, Eastman developed two new processes which have resulted in two new invention reports. One process deals with carbonylation of benzyl ether which represents a model for coal liquefaction and the second focuses on the acceleration of carbonylation rates for propionic acid synthesis, via use of polar aprotic solvents. These two inventions are major improvements in the novel Mo-catalyzed homogeneous process for propionic acid synthesis technology, developed by Eastman. Over the last quarter, RTI completed three reaction cycles and two regeneration cycles as a part of long-term reaction regeneration cycle study on a 10% Nb{sub 2}O{sub 5}/Si0{sub 2} catalyst, for vapor phase condensation reaction of formaldehyde with propionic acid.

  12. Synthesis of acrylates and methacrylates from coal-derived syngas. Quarterly report, October--December 1996

    SciTech Connect

    1997-05-02

    Research Triangle Institute (RTI), Eastman Chemical Company, and Bechtel collectively are developing a novel process for the synthesis of methyl methacrylate (MMA) from coal-derived syngas, under a contract from the US Department of Energy, Federal Energy Technology Center. This three-step process consists of synthesis of a propionate, its condensation with formaldehyde, and esterification of resulting methacrylic acid (MAA) with methanol to produce MMA. Eastman has focused on the propionate synthesis step. the resultant Mo catalysts work efficiently at much less severe conditions (170{degrees}C and 30 atm) than the conventional Ni catalysts (270{degrees}C and 180 atm). Bechtel has performed an extensive cost analysis which shows that Eastman`s propionate synthesis step is competitive with other technologies to produce the anhydride. In the second step, RTI and Eastman have developed active and stable V-Si-P ternary metal oxide catalysts Nb/SiO{sub 2} and Ta/SiO{sub 2} catalysts for the condensation of propionic anhydride and acid with formaldehyde. RTI has demonstrated a novel correlation among the catalyst acid-base properties, condensation reaction yield, and long-term catalyst activity. Current research focuses on enhancing the condensation reaction yields by better understanding of the acid-base property correlation, in situ condensation in a high-temperature, high- pressure (HTHP) slurry reactor, and alternate formaldehyde feedstocks. Based on Eastman and RTI laboratory data, a cost estimate is also being developed for the integrated process.

  13. Methacrylated gelatin and mature adipocytes are promising components for adipose tissue engineering.

    PubMed

    Huber, Birgit; Borchers, Kirsten; Tovar, Günter Em; Kluger, Petra J

    2016-01-01

    In vitro engineering of autologous fatty tissue constructs is still a major challenge for the treatment of congenital deformities, tumor resections or high-graded burns. In this study, we evaluated the suitability of photo-crosslinkable methacrylated gelatin (GM) and mature adipocytes as components for the composition of three-dimensional fatty tissue constructs. Cytocompatibility evaluations of the GM and the photoinitiator Lithium phenyl-2,4,6-trimethylbenzoylphosphinate (LAP) showed no cytotoxicity in the relevant range of concentrations. Matrix stiffness of cell-laden hydrogels was adjusted to native fatty tissue by tuning the degree of crosslinking and was shown to be comparable to that of native fatty tissue. Mature adipocytes were then cultured for 14 days within the GM resulting in a fatty tissue construct loaded with viable cells expressing cell markers perilipin A and laminin. This work demonstrates that mature adipocytes are a highly valuable cell source for the composition of fatty tissue equivalents in vitro. Photo-crosslinkable methacrylated gelatin is an excellent tissue scaffold and a promising bioink for new printing techniques due to its biocompatibility and tunable properties.

  14. Syringyl Methacrylate, a Hardwood Lignin-Based Monomer for High-Tg Polymeric Materials

    PubMed Central

    2016-01-01

    As viable precursors to a diverse array of macromolecules, biomass-derived compounds must impart wide-ranging and precisely controllable properties to polymers. Herein, we report the synthesis and subsequent reversible addition–fragmentation chain-transfer polymerization of a new monomer, syringyl methacrylate (SM, 2,6-dimethoxyphenyl methacrylate), that can facilitate widespread property manipulations in macromolecules. Homopolymers and heteropolymers synthesized from SM and related monomers have broadly tunable and highly controllable glass transition temperatures ranging from 114 to 205 °C and zero-shear viscosities ranging from ∼0.2 kPa·s to ∼17,000 kPa·s at 220 °C, with consistent thermal stabilities. The tailorability of these properties is facilitated by the controlled polymerization kinetics of SM and the fact that one vs two o-methoxy groups negligibly affect monomer reactivity. Moreover, syringol, the precursor to SM, is an abundant component of depolymerized hardwood (e.g., oak) and graminaceous (e.g., switchgrass) lignins, making SM a potentially sustainable and low-cost candidate for tailoring macromolecular properties. PMID:27213117

  15. Radiation induced graft copolymerization of methyl methacrylate onto chrome-tanned pig skins

    NASA Astrophysics Data System (ADS)

    Pietrucha, K.; Pȩkala, W.; Kroh, J.

    Graft copolymerization of methyl methacrylate (MMA) onto chrome-tanned pig skins was carried out by the irradiation with 60Co ?-rays. The grafted polymethyl methacrylate (PMMA) chains were isolated by acid hydrolysis of the collagen backbone in order to characterize the graft copolymers. Proof of grafting was obtained through the detection of amino acid endgroups in the isolated grafts by reaction with ninhydrin. The grafting yield of MMA in aqueous emulsion was found to be higher than that for pure MMA and MMA in acetone. The degree of grafting increases with increasing monomer concentration in emulsion and reaches maximum at radiation dose ca 15 kGy. The yield of grafting is very high - ca 90% of monomer converts into copolymer and only 10% is converted into homopolymer. The present paper reports the physical properties of chrome-tanned pig skins after graft polymerization with MMA in emulsion. Modified leathers are more resistant against water absorption and abrasion in comparison with unmodified ones. They have more uniform structure over the whole surface, greater thickness and stiffness. The results reported seem to indicate that MMA may be used in the production of shoe upper and sole leathers. The mechanism of some of the processes occuring during radiation grafting of MMA in water emulsion on tanned leathers has been also suggested and discussed.

  16. Exposure assessment of acrylates/methacrylates in radiation-cured applications

    SciTech Connect

    Not Available

    1987-09-25

    Occupational exposures to radiation-cured acrylates/methacrylates during their processing and use in coatings, inks, and adhesives were evaluated in 12 walk-through surveys at formulator and applicator sites. Inhalation and dermal-exposure routes were studied. According to the authors, the basic process used to formulate coatings, inks, and adhesives consists of blending raw materials in closed mixing vessels using local exhaust ventilation in the form of elephant trunks at vessel charging and packaging locations. Application methods surveyed included reverse-roll coaters, direct roll coaters, curtain/rain coaters, laminators, pneumatic injection, spray guns, and manual application. At the sites surveyed, the number of workers potentially exposed at each site ranged from two to 142. Process operators at applicator sites had the greatest potential for dermal exposure. Generally, the potential for inhalation exposure was low due to low volatility of the multifunctional acrylates/methacrylates used in the formulations. No reliable air-monitoring data were available at any site. Respirator use was limited and sporadic.

  17. Engineered Contractile Skeletal Muscle Tissue on a Microgrooved Methacrylated Gelatin Substrate

    PubMed Central

    Hosseini, Vahid; Ahadian, Samad; Ostrovidov, Serge; Camci-Unal, Gulden; Chen, Song; Kaji, Hirokazu; Ramalingam, Murugan

    2012-01-01

    To engineer tissue-like structures, cells must organize themselves into three-dimensional (3D) networks that mimic the native tissue microarchitecture. Microfabricated hydrogel substrates provide a potentially useful platform for directing cells into biomimetic tissue architecture in vitro. Here, we present microgrooved methacrylated gelatin hydrogels as a suitable platform to build muscle-like fibrous structures in a facile and highly reproducible fashion. Microgrooved hydrogel substrates with two different ridge sizes (50 and 100 μm) were fabricated to assess the effect of the distance between engineered myofibers on the orientation of the bridging C2C12 myoblasts and the formation of the resulting multinucleated myotubes. It was shown that although the ridge size did not significantly affect the C2C12 myoblast alignment, the wider-ridged micropatterned hydrogels generated more myotubes that were not aligned to the groove direction as compared to those on the smaller-ridge micropatterns. We also demonstrated that electrical stimulation improved the myoblast alignment and increased the diameter of the resulting myotubes. By using the microstructured methacrylated gelatin substrates, we built free-standing 3D muscle sheets, which contracted when electrically stimulated. Given their robust contractility and biomimetic microarchitecture, engineered tissues may find use in tissue engineering, biological studies, high-throughput drug screening, and biorobotics. PMID:22963391

  18. Transdermal regulation of vascular network bioengineering using a photopolymerizable methacrylated gelatin hydrogel.

    PubMed

    Lin, Ruei-Zeng; Chen, Ying-Chieh; Moreno-Luna, Rafael; Khademhosseini, Ali; Melero-Martin, Juan M

    2013-09-01

    The search for hydrogel materials compatible with vascular morphogenesis is an active area of investigation in tissue engineering. One candidate material is methacrylated gelatin (GelMA), a UV-photocrosslinkable hydrogel that is synthesized by adding methacrylate groups to the amine-containing side-groups of gelatin. GelMA hydrogels containing human endothelial colony-forming cells (ECFCs) and mesenchymal stem cells (MSCs) can be photopolymerized ex vivo and then surgically transplanted in vivo as a means to generate vascular networks. However, the full clinical potential of GelMA will be best captured by enabling minimally invasive implantation and in situ polymerization. In this study, we demonstrated the feasibility of bioengineering human vascular networks inside GelMA constructs that were first subcutaneously injected into immunodeficient mice while in liquid form, and then rapidly crosslinked via transdermal exposure to UV light. These bioengineered vascular networks developed within 7 days, formed functional anastomoses with the host vasculature, and were uniformly distributed throughout the constructs. Most notably, we demonstrated that the vascularization process can be directly modulated by adjusting the initial exposure time to UV light (15-45 s range), with constructs displaying progressively less vascular density and smaller average lumen size as the degree of GelMA crosslinking was increased. Our studies support the use of GelMA in its injectable form, followed by in situ transdermal photopolymerization, as a preferable means to deliver cells in applications that require the formation of vascular networks in vivo.

  19. Transdermal regulation of vascular network bioengineering using a photopolymerizable methacrylated gelatin hydrogel

    PubMed Central

    Lin, Ruei-Zeng; Chen, Ying-Chieh; Moreno-Luna, Rafael; Khademhosseini, Ali; Melero-Martin, Juan M.

    2013-01-01

    The search for hydrogel materials compatible with vascular morphogenesis is an active area of investigation in tissue engineering. One candidate material is methacrylated gelatin (GelMA), a UV-photocrosslinkable hydrogel that is synthesized by adding methacrylate groups to the amine-containing side-groups of gelatin. GelMA hydrogels containing human endothelial colony-forming cells (ECFCs) and mesenchymal stem cells (MSCs) can be photopolymerized ex vivo and then surgically transplanted in vivo as a means to generate vascular networks. However, the full clinical potential of GelMA will be best captured by enabling minimally invasive implantation and in situ polymerization. In this study, we demonstrated the feasibility of bioengineering human vascular networks inside GelMA constructs that were first subcutaneously injected into immunodeficient mice while in liquid form, and then rapidly crosslinked via transdermal exposure to UV light. These bioengineered vascular networks developed within 7 days, formed functional anastomoses with the host vasculature, and were uniformly distributed throughout the constructs. Most notably, we demonstrated that the vascularization process can be directly modulated by adjusting the initial exposure time to UV light (15–45 s range), with constructs displaying progressively less vascular density and smaller average lumen size as the degree of GelMA crosslinking was increased. Our studies support the use of GelMA in its injectable form, followed by in situ transdermal photopolymerization, as a preferable means to deliver cells in applications that require the formation of vascular networks in vivo. PMID:23773819

  20. Effects of Dental Methacrylates on Oxygen Consumption and Redox Status of Human Pulp Cells

    PubMed Central

    Nocca, Giuseppina; Callà, Cinzia; Martorana, Giuseppe Ettore; Cicillini, Loredana; Lupi, Alessandro; Cordaro, Massimo; Luisa Gozzo, Maria

    2014-01-01

    Several studies have already demonstrated that the incomplete polymerization of resin-based dental materials causes the release of monomers which might affect cell metabolism. The aim of this study was to investigate the effects of triethylene glycol dimethacrylate, 1,4-butanediol dimethacrylate, urethane dimethacrylate, and 2-hydroxyethyl methacrylate on (1) cellular energy metabolism, evaluating oxygen consumption rate, glucose consumption, glucose 6-phosphate dehydrogenase activity, and lactate production, and (2) cellular redox status, through the evaluation of glutathione concentration and of the activities of enzymes regulating glutathione metabolism. Methods. Human pulp cells were used and oxygen consumption was measured by means of a Clark electrode. Moreover, reactive oxygen species production was quantified. Enzymatic activity and glucose and lactate concentrations were determined through a specific kit. Results. Triethylene glycol dimethacrylate, 1,4-butanediol dimethacrylate, and 2-hydroxyethyl methacrylate induced a decrease in oxygen consumption rate, an enhancement of glucose consumption, and lactate production, whilst glucose 6-phosphate dehydrogenase and glutathione reductase activity were not significantly modified. Moreover, the monomers induced an increase of reactive oxygen species production with a consequent increase of superoxide dismutase and catalase enzymatic activities. A depletion of both reduced and total glutathione was also observed. Conclusion. The obtained results indicate that dental monomers might alter energy metabolism and glutathione redox balance in human pulp cells. PMID:24693541

  1. Visible Light Crosslinking of Methacrylated Hyaluronan Hydrogels for Injectable Tissue Repair

    PubMed Central

    Fenn, Spencer L.; Oldinski, Rachael A.

    2015-01-01

    Tissue engineering hydrogels are primarily cured in situ using ultraviolet (UV) radiation which limits the use of hydrogels as drug or cell carriers. Visible green light activated crosslinking systems are presented as a safe alternative to UV photocrosslinked hydrogels, without compromising material properties such as viscosity and stiffness. The objective of this study was to fabricate and characterize photocrosslinked hydrogels with well-regulated gelation kinetics and mechanical properties for the repair or replacement of soft tissue. An anhydrous methacrylation of hyaluronan (HA) was performed to control the degree of modification (DOM) of HA, verified by 1H-NMR spectroscopy. UV activated crosslinking was compared to visible green light activated crosslinking. While the different photocrosslinking techniques resulted in varied crosslinking times, comparable mechanical properties of UV and green light activated crosslinked hydrogels were achieved using each photocrosslinking method by adjusting time of light exposure. Methacrylated HA (HA-MA) hydrogels of varying molecular weight, DOM and concentration exhibited compressive moduli ranging from 1 kPa to 116 kPa, for UV crosslinking, and 3 kPa to 146 kPa, for green light crosslinking. HA-MA molecular weight and concentration were found to significantly influence moduli values. HA-MA hydrogels did not exhibit any significant cytotoxic affects towards human mesenchymal stem cells. Green light activated crosslinking systems are presented as a viable method to form natural-based hydrogels in situ. PMID:26097172

  2. Styrene-butadiene rubber/halloysite nanotubes nanocomposites modified by methacrylic acid

    NASA Astrophysics Data System (ADS)

    Guo, Baochun; Lei, Yanda; Chen, Feng; Liu, Xiaoliang; Du, Mingliang; Jia, Demin

    2008-12-01

    Methacrylic acid (MAA) was used to improve the performance of styrene-butadiene rubber (SBR)/halloysite nanotubes (HNTs) nanocomposites by direct blending. The detailed interaction mechanisms of MAA and the in situ formed zinc methacrylate (ZDMA) were revealed by X-ray diffraction (XRD), surface area and porosity analysis, X-ray photoelectron spectroscopy (XPS) together with crosslink density determination. The strong interfacial bonding between HNTs and rubber matrix is resulted through ZDMA and MAA intermediated linkages. ZDMA connects SBR and HNTs via grafting/complexation mechanism. MAA bonds SBR and HNTs through grafting/hydrogen bonding mechanism. Significantly improved dispersion of HNTs in virtue of the interactions between HNTs and MAA or ZDMA was achieved. Effects of MAA content on the vulcanization behavior, morphology and mechanical properties of the nanocomposites were investigated. Promising mechanical properties of MAA modified SBR/HNTs nanocomposites were obtained. The changes in vulcanization behavior, mechanical properties and morphology were correlated with the interactions between HNTs and MAA or ZDMA and the largely improved dispersion of HNTs.

  3. Methacrylated gelatin and mature adipocytes are promising components for adipose tissue engineering.

    PubMed

    Huber, Birgit; Borchers, Kirsten; Tovar, Günter Em; Kluger, Petra J

    2016-01-01

    In vitro engineering of autologous fatty tissue constructs is still a major challenge for the treatment of congenital deformities, tumor resections or high-graded burns. In this study, we evaluated the suitability of photo-crosslinkable methacrylated gelatin (GM) and mature adipocytes as components for the composition of three-dimensional fatty tissue constructs. Cytocompatibility evaluations of the GM and the photoinitiator Lithium phenyl-2,4,6-trimethylbenzoylphosphinate (LAP) showed no cytotoxicity in the relevant range of concentrations. Matrix stiffness of cell-laden hydrogels was adjusted to native fatty tissue by tuning the degree of crosslinking and was shown to be comparable to that of native fatty tissue. Mature adipocytes were then cultured for 14 days within the GM resulting in a fatty tissue construct loaded with viable cells expressing cell markers perilipin A and laminin. This work demonstrates that mature adipocytes are a highly valuable cell source for the composition of fatty tissue equivalents in vitro. Photo-crosslinkable methacrylated gelatin is an excellent tissue scaffold and a promising bioink for new printing techniques due to its biocompatibility and tunable properties. PMID:26017717

  4. Poly(ethylene glycol) methacrylate hydrolyzable microspheres for transient vascular embolization.

    PubMed

    Louguet, Stéphanie; Verret, Valentin; Bédouet, Laurent; Servais, Emeline; Pascale, Florentina; Wassef, Michel; Labarre, Denis; Laurent, Alexandre; Moine, Laurence

    2014-03-01

    Poly(ethylene glycol) methacrylate (PEGMA) hydrolyzable microspheres intended for biomedical applications were readily prepared from poly(lactide-co-glycolide) (PLGA)-poly(ethylene glycol) (PEG)-PLGA crosslinker and PEGMA as a monomer using a suspension polymerization process. Additional co-monomers, methacrylic acid and 2-methylene-1,3-dioxepane (MDO), were incorporated into the initial formulation to improve the properties of the microspheres. All synthesized microspheres were spherical in shape, calibrated in the 300-500 μm range, swelled in phosphate-buffered saline (PBS) and easily injectable through a microcatheter. Hydrolytic degradation experiments performed in PBS at 37 °C showed that all of the formulations tested were totally degraded in less than 2 days. The resulting degradation products were a mixture of low-molecular-weight compounds (PEG, lactic and glycolic acids) and water-soluble polymethacrylate chains having molecular weights below the threshold for renal filtration of 50 kg mol(-1) for the microspheres containing MDO. Both the microspheres and the degradation products were determined to exhibit minimal cytotoxicity against L929 fibroblasts. Additionally, in vivo implantation in a subcutaneous rabbit model supported the in vitro results of a rapid degradation rate of microspheres and provided only a mild and transient inflammatory reaction comparable to that of the control group. PMID:24321348

  5. Morphological characterization of silica obtained by calcination of methacrylic and epoxy - silica hybrid systems

    NASA Astrophysics Data System (ADS)

    Tescione, F.; Lionetto, F.; Corcione, C. Esposito; Buonocore, G. G.; Striani, R.; Lavorgna, M.; Frigione, M.

    2016-05-01

    The work is addressed to investigating the potentiality of calcination of organic-inorganic (O-I) hybrids as a feasible approach to produce silica particles, at mild temperature conditions and with tailored morphology. Two different innovative hybrid systems were obtained through sol-gel process with a siloxane content ranging from 6 to 26wt%. The two O-I hybrids differed for i) the organic matrix (methacrylic or epoxy), ii) its crosslinking mechanism (photopolymerization for methacrylic systems or thermal cold-cure for epoxy systems) and iii) the rate ratio between sol-gel and crosslinking reactions. Different characterization techniques were used to understand the effect of composition and curing method on the morphology of the silica obtained from O-I hybrids after calcination in air. The results confirm the morphology and properties of silica particles in terms of surface and porosity may be tailored over a wide range by varying the composition and nature of organic and inorganic precursors of hybrids.

  6. Determination of methacrylic acid in food simulants by pyrolytic butylation-gas chromatography.

    PubMed

    Huang, Zhongping; Qiu, Ruofeng; Liu, Tingfei; Huang, Yilei; Zhu, Zuoyi; Wang, Lili

    2016-07-01

    An on-line pyrolytic butylation approach was proposed to determine methacrylic acid (MA) in food simulants by gas chromatography (GC) without an expensive pyrolyzer. MA in food simulants was converted into butyl methacrylate in the presence of tetrabutylammonium hydroxide (TBAH) without any pretreatment at 330°C in the injection-port, contributing to high GC signal response. The derivatizing conditions for the proposed method were optimized, namely the injection-port temperature, type and amount of the organic alkaline used for derivatization. A series of standard solutions of MA in the range of 1.0-50mg/kg were analyzed with correlation coefficient r≥0.9975. The limits of detection (LODs) were less than 0.15mg/kg for MA in four matrix simulants (distilled water, 3%w/v acetic acid, 10%v/v ethanol, and isooctane). Relative standard deviations (RSDs) for retention time, peak height and peak area were all less than 3.88%. The technique was successfully applied to the analysis of MA migrating from plastic cup samples, with recoveries of added MA in the range of 96.5-123.0%. Direct injection of the simulants into the GC system after migration tests, without any pretreatment step, makes the developed method of great value for rapid screening analysis of samples in bulks. PMID:27262371

  7. Low-cost fabrication of poly(methyl methacrylate) microchips using disposable gelatin gel templates.

    PubMed

    Chen, Zhi; Yu, Zhengyin; Chen, Gang

    2010-06-15

    A simple method based on disposable gelatin gel templates has been developed for the low-cost fabrication of poly(methyl methacrylate) (PMMA) microfluidic chips. Gelatin was dissolved in glycerol aqueous solution under heat to prepare a thermally reversible impression material. The molten gel was then sandwiched between a glass plate and a SU-8 template bearing negative relief of microstructure. After cooling, the negative SU-8 template could be easily separated from the solidified gelatin gel and a layer of gelatin template bearing positive relief of the microstructure was left on the glass plate. Subsequently, prepolymerized methyl methacrylate molding solution containing a UV-initiator was sandwiched between the gel template and a PMMA plate and was allowed to polymerize under UV light to fabricate PMMA channel plate at room temperature. Complete microchips could be obtained by bonding the channel plates with covers using plasticizer-assisted thermal bonding at 90 degrees C. Gelatin gel template can be mass-produced and will find application in the mass production of PMMA microchips at low cost. The prepared microfluidic microchips have been successfully employed in the capillary electrophoresis analysis of several ions in connection with contactless conductivity detection.

  8. Effects of star-shape poly(alkyl methacrylate) arm uniformity on lubricant properties

    DOE PAGES

    Robinson, Joshua W.; Qu, Jun; Erck, Robert; Cosimbescu, Lelia; Zhou, Yan

    2016-03-29

    Star-shaped poly(alkyl methacrylate)s (PAMAs) were prepared and blended into an additive-free engine oil to assess the structure property relationship between macromolecular structure and lubricant performance. These additives were designed with a comparable number of repeating units per arm and the number of arms was varied between 3 and 6. Well-defined star-shaped PAMAs were synthesized by atom transfer radical polymerization (ATRP) via a core-first strategy from multi-functional headgroups. Observations of the polymer-oil blends suggest that stars with less than four arms are favorable as a viscosity index improver (VII), and molecular weight dominates viscosity-related effects over other structural features. Star-shaped PAMAs,more » as oil additives, effectively reduce the friction coefficient in both mixed and boundary lubrication regime. Several analogs outperformed commercial VIIs in both viscosity and friction performance. Furthermore, increased wear rates were observed for these star-shaped PAMAs in the boundary lubrication regime suggesting pressure-sensitive conformations may exist.« less

  9. Bond Strengths of Silorane- and Methacrylate-Based Composites to Various Underlying Materials

    PubMed Central

    Ozer, Sezin; Sen Tunc, Emine; Gonulol, Nihan

    2014-01-01

    Objective. To evaluate shear bond strength (SBS) values of a methacrylate (FZ 250) and a silorane-based (FS) resin composite to various underlying materials. Materials and Methods. A total of 80 samples were prepared with four different underlying materials; a flowable (FLC) and a bulk-fill flowable composite (BFC), and a conventional (CGIC) and resin modified glass-ionomer cement (RMGIC). These underlying materials were laminated plus to methacrylate or silorane-based resin composites (n = 10). To evaluate the specimens SBS values were evaluated with a universal testing machine (cross-head speed; 1.0 mm/min). Statistical comparisons were carried out using two-way ANOVA and Tukey's post hoc test with a significance level of P < 0.05. Results. SBS values for FZ250 were significantly higher than for FS for all of the underlying materials tested (P < 0.05). SBS values of FZ250 to BFC were significantly higher than to all other materials (P < 0.05), whereas SBS values of FS did not vary significantly according to underlying material (P > 0.05). Conclusion. The use of FS in conjunction with any of the tested materials showed lower SBS than the FZ 250. Also, new low elastic modulus liner BFC presented slightly good interfacial adhesion so, the usage of BFC as an underlying material may be preferable for FZ 250. PMID:24895608

  10. Mechanism and dynamics of intramolecular triplet state decay of 1-propyl-4-thiouracil and its α-methyl-substituted derivatives studied in perfluoro-1,3-dimethylcyclohexane.

    PubMed

    Wenska, Grazyna; Taras-Goślińska, Katarzyna; Łukaszewicz, Adam; Burdziński, Gotard; Koput, Jacek; Maciejewski, Andrzej

    2011-08-01

    The absorption, phosphorescence and phosphorescence excitation spectra, phosphorescence quantum yields, and T(1) excited state lifetimes of four 4-thiouracil derivatives were measured for the first time in chemically inert and very weakly interacting perfluoro-1,3-dimethylcyclohexane at room temperature. The set of the 4-thiouracil derivatives comprises 1-propyl-4-thiouracil (PTU) and the related compounds having a methyl substituent at the position α to the thiocarbonyl group, namely 1-propyl-4-thiothymine (PTT), 1,3-dimethyl-4-thiouracil (DMTU), and 1-methyl-3-trideuteriomethyl-4-thiouracil ([D(3)]DMTU). Quantitative information on the intramolecular decay of the T(1) excited state of the four 4-thiouracil derivatives is presented, and the mechanism and dynamics of this process are discussed. In the absence of self quenching and solvent induced deactivation, the T(1) decay of the four 4-thiouracil derivatives was dominated by intramolecular nonradiative processes (NR). The values of the rate constant k(NR) in DMTU and [D(3)]DMTU are about 4 times larger than that in PTT and about 3 times larger than that in PTU. The reasons for the enhanced nonradiative rate constant in DMTU are discussed. It is concluded that the faster rate of the nonradiative processes in DMTU is related to a larger contribution from mixing of the T(2) (nπ*) state into the lowest energy T(1) (ππ*) state, as compared to the analogous coupling in PTU and PTT. This conclusion is supported by ab initio calculations performed at the EOM-CC2/aug-cc-pVDZ level of theory. The energy spacing between the T(2) (nπ*) and T(1) (ππ*) states is estimated to be about 500, 1100, and 2000 cm(-1) for DMTU, PTU, and PTT, respectively. Among the three compounds in question, the predicted energy spacing is thus the smallest for DMTU.

  11. Analysis of the flame retardant metabolites bis(1,3-dichloro-2-propyl) phosphate (BDCPP) and diphenyl phosphate (DPP) in urine using liquid chromatography-tandem mass spectrometry.

    PubMed

    Cooper, E M; Covaci, A; van Nuijs, A L N; Webster, T F; Stapleton, H M

    2011-10-01

    Organophosphate triesters tris(1,3-dichloro-2-propyl) phosphate (TDCPP) and triphenyl phosphate are widely used flame retardants (FRs) present in many products common to human environments, yet understanding of human exposure and health effects of these compounds is limited. Monitoring urinary metabolites as biomarkers of exposure can be a valuable aid for improving this understanding; however, no previously published method exists for the analysis of the primary TDCPP metabolite, bis(1,3-dichloro-2-propyl) phosphate (BDCPP), in human urine. Here, we present a method to extract the metabolites BDCPP and diphenyl phosphate (DPP) in human urine using mixed-mode anion exchange solid phase extraction and mass-labeled internal standards with analysis by atmospheric pressure chemical ionization liquid chromatography tandem mass spectrometry. The method detection limit was 8 pg mL(-1) urine for BDCPP and 204 pg mL(-1) for DPP. Recoveries of analytes spiked into urine ranged from 82 ± 10% to 91 ± 4% for BDCPP and from 72 ± 12% to 76 ± 8% for DPP. Analysis of a small number of urine samples (n=9) randomly collected from non-occupationally exposed adults revealed the presence of both BDCPP and DPP in all samples. Non-normalized urinary concentrations ranged from 46-1,662 pg BDCPP mL(-1) to 287-7,443 pg DPP mL(-1), with geometric means of 147 pg BDCPP mL(-1) and 1,074 pg DPP mL(-1). Levels of DPP were higher than those of BDCPP in 89% of samples. The presented method is simple and sufficiently sensitive to detect these FR metabolites in humans and may be applied to future studies to increase our understanding of exposure to and potential health effects from FRs. PMID:21830137

  12. Synthesis, characterization and application of smart magnetic core-shell polymeric particles

    NASA Astrophysics Data System (ADS)

    Ho, Kin Man Edmond

    Magnetic gamma-Fe2O3 nanoparticles with three different types of surface modification were prepared. They include oleate-coated gamma-Fe 2O3 (o-Fe2O3), citrate-coated gamma-Fe 2O3 (c-Fe2O3), vinyl-coated gamma-Fe 2O3 (MPS-Fe2O3) nanoparticles. These nanoparticles were synthesized via three approaches: (1) decomposition and oxidation of Fe(CO)5 with oleic acid in a hot organic medium; (2) co-precipitation of FeCl2 and FeCl3 in an ammonium solution at pH 11--12, followed by surface coating with trisodium citrate; and (3) subsequent modification of the citrate-coated gamma-Fe2O3 through hydrolysis and condensation of tetraethyl orthosilicate (TEOS) and 3-(trimethoxysilyl)propyl methacrylate (MPS) using the modified Stober method, respectively. Encapsulation of these three types of magnetic nanoparticles into the poly(methyl methacrylate)/chitosan core-shell particles via graft copolymerization of methyl methacrylate (MMA) from chitosan were attempted. Successful encapsulation of iron oxide nanoparticles into the core-shell particles was achieved when the MPS-Fe2O3 nanoparticles were subjected to the copolymerization conditions. The magnetic core-shell particles (MCS) produced, in a reasonable yield, had diameter below 200 nm with narrow size distribution. Transmission electron microscopy (TEM) micrographs of the particles clearly revealed well-defined core-shell nanostructures where magnetic nanoparticles located inside PMMA and coated with chitosan shell. Properties of the MCS particles including their surface charge density, colloidal stability, chemical composition, magnetization measurement and film-forming ability were investigated with zeta-potential measurement, particle size measurement, Fourier-transform infrared (FT-IR) spectroscopy, vibrating sample magnetometer (VSM) and atomic force microscopy (AFM), respectively. Application of the MCS particles was explored. The MCS particles were used to stabilize with single-walled carbon nanotubes (SWNTs) via

  13. Semi-micro reversed-phase liquid chromatography for the separation of alkyl benzenes and proteins exploiting methacrylate- and polystyrene-based monolithic columns.

    PubMed

    Masini, Jorge Cesar

    2016-05-01

    Monolithic columns were synthesized inside 1.02 mm internal diameter fused-silica lined stainless-steel tubing. Styrene and butyl, hexyl, lauryl, and glycidyl methacrylates were the functional monomers. Ethylene glycol dimethacrylate and divinylbenzene were the crosslinkers. The glycidyl methacrylate polymer was modified with gold nanoparticles and dodecanethiol (C12 ). The separation of alkylbenzenes was investigated by isocratic elution in 60:40 v/v acetonitrile/water. The columns based on polystyrene-co-divinylbenzene and poly(glycidyl methacrylate)-co-ethylene glycol dimethacrylate modified with dodecanethiol did not provide any separation of alkyl benzenes. The poly(hexyl methacrylate)-co-ethylene glycol dimethacrylate and poly(lauryl methacrylate)-co-ethylene glycol dimethacrylate columns separated the alkyl benzenes with plate heights between 30 and 60 μm (50 μL min(-1) and 60°C). Similar efficiency was achieved in the poly(butyl methacrylate)-co-ethylene glycol dimethacrylate column, but only at 10 μL min(-1) (0.22 mm s(-1) ). Backpressures varied from 0.38 MPa in the hexyl methacrylate to 13.4 MPa in lauryl methacrylate columns (50 μL min(-1) and 60°C). Separation of proteins was achieved in all columns with different efficiencies. At 100 μL min(-1) and 60°C, the lauryl methacrylate columns provided the best separation, but their low permeability prevented high flow rates. Flow rates up to 500 μL min(-1) were possible in the styrene, butyl and hexyl methacrylate columns.

  14. Effects of temperature and alkyl groups of poly(alkyl methacrylate)s on inter- and intramolecular interactions of excited singlet states of pyrenyl guest molecules.

    PubMed

    Abraham, Shibu; Atvars, Teresa D Z; Weiss, Richard G

    2010-09-30

    Temperature-induced changes in the static and dynamic characteristics of the fluorescence from pyrene and N,N-dimethyl-3-(pyren-1-yl)propan-1-amine (PyC3NMe2) have been used to determine the locations and mobilities of these probes in the anisotropic environments provided by films of 5 poly(alkyl methacrylate) (PAMA) polymers in which alkyl is ethyl, butyl, isobutyl, cyclohexyl, and hexadecyl. Whereas emission from pyrene reports on the polarity of the guest sites and the ability of molecules to diffuse translationally between sites, emission from PyC3NMe2 yields information about the fluidity and the shape of the guest sites. Data have been obtained from 20 to >400 K, a range that spans the onsets of several relaxation processes in the hosts. Those data indicate that the pyrenyl groups reside near to ester functionalities in most of the PAMAs, although the distance from them (and the main chains) depends upon the bulkiness of the alkyl groups. Among the most important conclusions derived from this research is that the rates of segmental relaxation phenomena near the probe molecules--and not free volume, as was concluded previously from fluorescence measurements in polyethylene films--are the dominant contributors to the fluorescence changes. Of practical importance, changes in those rates have permitted the onset temperatures of many of the relaxation phenomena occurring in the vicinity of the probes to be located.

  15. Study of two cohorts of workers exposed to methyl methacrylate in acrylic sheet production

    PubMed Central

    Tomenson, J; Bonner, S; Edwards, J; Pemberton, M; Cummings, T; Paddle, G

    2000-01-01

    OBJECTIVES—To study mortality among 4324 workers at two United Kingdom factories, Darwen, Lancashire and Wilton, Cleveland, producing polymethyl methacrylate (PMMA) sheet. The Darwen factory is still active, but the Wilton one was closed in 1970. Also, to investigate patterns of mortality after exposure to methyl methacrylate; in particular, mortality from colon and rectal cancer.
METHODS—All male employees at the Darwen factory with a record of employment in 1949-88 and all men ever employed at the Wilton factory (1949-70) were investigated. The vital status of both cohorts was ascertained on 31 December 1995. The exposure of 1526 subjects at the Darwen plant who were engaged from 1949 onwards could be characterised. The mean duration of exposure was 7.6 years at 13.2 ppm (8 hour time weighted average), although exposures in some work groups were as high as 100 ppm. It was not possible to calculate the cumulative exposure of workers first employed at the Darwen plant before 1949 or workers at the Wilton factory.
RESULTS—In the Darwen cohort, 622 deaths were identified and a further 700 deaths in the Wilton cohort. Mortalities for the cohort were compared with national and local rates and expressed as standardised mortality ratios (SMRs). In the subcohort of Darwen workers with more than minimal exposure to MMA, reduced mortalities compared with national and local rates, were found for all causes (SMR 94), and colorectal cancer (SMR 92), but mortality from all cancers was slightly increased (SMR 104). No relations were found with cumulative exposure to MMA. In the subcohort of Wilton workers, mortality from all causes of death was significantly reduced (SMR 89), but mortality from all cancers (SMR 103) and colorectal cancer (SMR 124) were increased. The excess of colorectal cancer was confined to employees with less than 1 year of employment.
CONCLUSION—The study provided no clear evidence that employment at the factories or exposure to

  16. On the degelation of networks - Case of the radiochemical degradation of methyl methacrylate - ethylene glycol dimethacrylate copolymers

    NASA Astrophysics Data System (ADS)

    Richaud, Emmanuel; Gilormini, Pierre; Verdu, Jacques

    2016-05-01

    Methyl methacrylate networks were synthetized and submitted to radiochemical degradation. Ageing was monitored by means of sol-gel analysis and glass transition temperature measurements. Networks were shown to undergo exclusively chain scission process leading to the degelation of network. The critical conversion degree corresponding to degelation (loss of all elastically active chains) is discussed regarding a statistical theory.

  17. Study of the sequential conversion of citric to itaconic to methacrylic acid in near-critical and supercritical water

    SciTech Connect

    Carlsson, M.; Habenicht, C.; Kam, L.C.; Antal, M.J. Jr. ); Bian, N.; Cunningham, R.J.; Jones, M. Jr. . Dept. of Chemistry)

    1994-08-01

    Between 200 and 400 million lb of citric acid are produced annually in the USA by fermentation of molasses and other sugars using the microorganism Aspergillus niger. A lesser quantity of itaconic acid is manufactured by a similar technology using Aspergillus terreus. The recovery of citric acid from its fermentation broth via calcium salt precipitation is a costly, highly complex, sophisticated operation. USDOE estimates the cost of dry citric acid produced from a new plant to be about $0.59/lb, whereas the estimated cost of wet citric acid (in its fermentation broth) from a new plant is about $0.19/lb and from an old plant is about $0.15/lb. Citric acid rapidly reacts in hot (250 C), compressed (34.5 MPa) liquid water to form itaconic and citraconic acids with a combined selectivity that exceeds 90%. At higher temperatures (360 C), in the absence and presence of NaOH, itaconic acid decarboxylates to form methacrylic acid. The yield of methacrylic acid depends on the temperature, pH, and buffer strength of the medium, reaching a maximum of about 70% (by mole) of the itaconic acid feed. Conditions which favor the production of methacrylic acid also lead to the formation of its hydration product: hydroxyisobutyric acid. Under optimum conditions the combined yield of methacrylic acid and hydroxyisobutyric acid from itaconic acid exceeds 80%. Results are consistent with well-established dehydration and decarboxylation mechanisms.

  18. Poly(glycidyl methacrylate)-grafted hydrophobic charge-induction agarose resins with 5-aminobenzimidazole as a functional ligand.

    PubMed

    Liu, Tao; Lin, Dong-Qiang; Wang, Cun-Xiang; Yao, Shan-Jing

    2016-08-01

    Hydrophobic charge-induction chromatography is a new technology for antibody purification. To improve antibody adsorption capacity of hydrophobic charge-induction resins, new poly(glycidyl methacrylate)-grafted hydrophobic charge-induction resins with 5-aminobenzimidazole as a functional ligand were prepared. Adsorption isotherms, kinetics, and dynamic binding behaviors of the poly(glycidyl methacrylate)-grafted resins prepared were investigated using human immunoglobulin G as a model protein, and the effects of ligand density were discussed. At the moderate ligand density of 330 μmol/g, the saturated adsorption capacity and equilibrium constant reached the maximum of 140 mg/g and 25 mL/mg, respectively, which were both much higher than that of non-grafted resin with same ligand. In addition, effective pore diffusivity and dynamic binding capacity of human immunoglobulin G onto the poly(glycidyl methacrylate)-grafted resins also reached the maximum at the moderate ligand density of 330 μmol/g. Dynamic binding capacity at 10% breakthrough was as high as 76.3 mg/g when the linear velocity was 300 cm/h. The results indicated that the suitable polymer grafting combined with the control of ligand density would be a powerful tool to improve protein adsorption of resins, and new poly(glycidyl methacrylate)-grafted hydrophobic charge-induction resins have a promising potential for antibody purification applications. PMID:27465269

  19. New Functionalities of PA6,6 Fabric Modified by Atmospheric Pressure Plasma and Grafted Glycidyl Methacrylate Derivatives

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Oxidative atmospheric pressure plasma was utilized to activate surface of PA 6,6 fabrics followed by graft copolymerization of glycidyl methacrylate (GMA) and further reacted with triethylene tetramine (TETA), quaternary ammonium chitosan (HTCC) or cyclodextrin (CD). The inner CD cavity was complexe...

  20. Light-curing time and aging effects on the nanomechanical properties of methacrylate- and silorane-based restorations.

    PubMed

    Catelan, A; Pollard, T; Bedran-Russo, Ak; Santos, Ph Dos; Ambrosano, Gmb; Aguiar, Fhb

    2014-01-01

    SUMMARY The aim of this study was to assess the influence of light-curing time on the nanohardness (H) and reduced elastic modulus (Er) of components (underlying dentin, hybrid layer, adhesive, and composite) of methacrylate- and silorane-based restorations after 24 hours and six months of storage. Class II slot preparations were carried out in human molars (n=3) and restored with methacrylate (Clearfil SE Bond [Kuraray] + Filtek Z250 [3M ESPE]) or silorane (LS restorative system [3M ESPE]) restorative systems and light-cured using light-emitting diode at 1390 mW/cm(2) for the recommended manufacturers' time or double time. Restorations were sectioned, and bonded dentin-resin interfaces were embedded in epoxy resin and polished for evaluation with a Berkovich fluid cell tip (TI 700 Ubi-1 nanoindenter, Hysitron). Data were statistically analyzed by analysis of variance and Tukey's test (alpha=0.05). Overall, the H and Er values were higher for methacrylate-based restorations than for silorane materials (p≤0.05), an increase in curing time did not improve the H and Er of the bonded interface components of either material (p>0.05), and aging significantly decreased the mechanical properties of interface components of both resin-based restorative systems (p≤0.05). In general, nanomechanical properties decreased after six months of storage, the methacrylate restorative system exhibited higher H and Er than silorane, and light-curing time did not influence the properties tested.

  1. Enhancing the sensitivity of poly(methyl methacrylate) based optical fiber Bragg grating temperature sensors.

    PubMed

    Zhang, Wei; Webb, David J; Peng, Gang-Ding

    2015-09-01

    In poly(methyl methacrylate) (PMMA)-based optical fiber gratings (POFBGs), the temperature response is determined by thermal expansion and the thermo-optic effect of the fiber. Because thermal expansion introduces a positive change and the thermo-optic effect introduces a negative change in the Bragg wavelength of the POFBG, they cancel out each other to some extent, leading to reduced and varying temperature sensitivity. By pre-straining a POFBG, the contribution of thermal expansion can be removed, and, consequently, the temperature sensitivity of POFBG can be greatly enhanced. Theoretical analysis also indicates a reduced thermo-optic coefficient of POFBG due to restrained linear expansion that matches experimental results. PMID:26368708

  2. Tensile behaviour of blends of poly(vinylidene fluoride) with poly(methyl methacrylate)

    NASA Technical Reports Server (NTRS)

    Cebe, Peggy; Chung, Shirley Y.

    1990-01-01

    Blends of poly(vinylidene fluoride) (PVF2) and poly(methyl methacrylate) (PMMA) were prepared over a wide concentration range and tested in tension at the same relative temperature below the glass transition. In nearly all blends, under conditions favoring disentanglement, (decrease in strain rate, or increase in test temperature), the yield stress and drawing stress decreased while the breaking strain increased. For materials with about the same degree of crystallinity, those with a higher proportion of amorphous PVF2 exhibited brittle-like behavior as a result of interlamellar tie molecules. In the semicrystalline blends, yield stress remains high as the test temperature approaches Tg, whereas in the amorphous blends the yield stress falls to zero near Tg. Results of physical aging support the role of interlamellar ties which cause semicrystalline blends to exhibit aging at temperatures above Tg.

  3. Fabrication of carbohydrate microarrays on a poly(2-hydroxyethyl methacrylate)-based photoactive substrate.

    PubMed

    Sundhoro, Madanodaya; Wang, Hui; Boiko, Scott T; Chen, Xuan; Jayawardena, H Surangi N; Park, JaeHyeung; Yan, Mingdi

    2016-01-21

    We report the fabrication of carbohydrate microarrays on a photoactive polymer, poly(HEMA-co-HEMA-PFPA), synthesized by RAFT copolymerization of 2-hydroxyethyl methacrylate (HEMA) and perfluorophenyl azide (PFPA)-derivatized HEMA (HEMA-PFPA). PFPA allows the covalent immobilization of carbohydrates whereas the HEMA polymer provides an antifouling surface, thus the microarrays can be used directly without pretreating the array with a blocking agent. The microarrays were prepared by spin-coating the polymer followed by printing the carbohydrates. Subsequent irradiation simultaneously immobilized the carbohydrates and crosslinked the polymer matrix. The obtained 3D carbohydrate microarrays showed enhanced fluorescence signals upon treating with a fluorescent lectin in comparison with a 2D microarray. The signals were acquired at a lower lectin concentration and a shorter incubation time. When treated with E. coli bacteria, the carbohydrate microarray showed results that were consistent with their binding patterns. PMID:26646384

  4. Acoustic and ultrasonic characterization constraints of self-healing (ethylene-co-methacrylic acid) copolymers

    NASA Astrophysics Data System (ADS)

    Pestka, Kenneth, II; Buckley, Jonathan; Kalista, Stephen; Bowers, Nicholas

    Recent experiments indicate that small sample poly (ethylene-co-methacrylic acid) copolymers (EMAA copolymers) exhibit time dependent variation in their acoustic and ultrasonic resonant spectra after exposure to a damage event. However, due to the relatively soft nature of these thermoplastic materials, several experimental constraints affect efficacy of resonant spectral analysis. In this work we will the address the effect of several characterization constraints on a self-healing EMAA ionomer (commercially known as Dupont Surlyn 8920) including the effects of transducer loading, continuous rapid resonant excitation and temporally separated long-term resonant excitation. In some circumstances, these experimental constraints can influence the time dependence of sample resonant frequency evolution, quality factor, and variation in spectral waveform. By quantifying these effects, robust characterization of post-damage self-healing EMAA samples is possible and will be presented.

  5. Self-Diffusion of Poly(isobutyl methacrylate) in Thin Films

    NASA Astrophysics Data System (ADS)

    Katzenstein, Joshua; Janes, Dustin; Hocker, Haley; Chandler, Justin; Ellison, Christopher

    2013-03-01

    While relevant to a variety of applications, such as nanocomposite intercalation and molecular transfer printing, the diffusion of polymers parallel to their confining interfaces has received limited experimental attention to date. A refinement of fluorescence recovery after patterned photobleaching (FRAPP) has been developed by our group as a versatile platform for understanding nanoconfined diffusion. Poly(isobutyl methacrylate) (PiBMA) is an ideal candidate for these studies because (in quartz or silicon wafer supported thin films) it exhibits a film thickness independent glass transition temperature (Tg). This is important because, according to the Rouse model, the diffusion coefficient does not depend simply on the absolute temperature, but on the distance from Tg. Therefore, in our systems the origin of the diffusion coefficient is possibly decoupled from Tg changes that are present in other polymer systems. In this talk, the effect of a variety of parameters, such as film thickness, diffusion temperature, and confining interfaces, will be discussed.

  6. Development of an anthropomorphic head phantom using dolomite and polymethyl methacrylate for dosimetry in computed tomography

    NASA Astrophysics Data System (ADS)

    Ximenes, R. E.; Silva, A.; Balbino, D.; Poletti, M. E.; Maia, A. F.

    2015-12-01

    A real human skull was selected to be a mold for the construction of an anthropomorphic head phantom with a mixture of dolomite and polymethyl methacrylate (PMMA). Using linear attenuation coefficients, we show that it is possible to use dolomite as a bone simulator as long as the proportion of the mixture is 1:1. Acrylic tubes were placed in the phantom constructed to enable the insertion of the ionization chamber to estimate the effective dose. Values for a typical head computed tomography examination found in the literature vary from 0.9 to 4.0 mSv. Dosimetric studies showed that the effective dose for the anthropomorphic phantom was (2.70±0.03) mSv and for the geometric PMMA phantom (3.67±0.04) mSv, values which are in agreement with the intervals reported in the literature. The investment to produce the phantom was approximately US160.00.

  7. Network formation of nanofibrillated cellulose in solution blended poly(methyl methacrylate) composites.

    PubMed

    Littunen, Kuisma; Hippi, Ulla; Saarinen, Tapio; Seppälä, Jukka

    2013-01-01

    Composites of poly(methyl methacrylate) (PMMA) and nanofibrillated cellulose (NFC) were prepared by solution blending and further processed by injection and compression molding. To improve adhesion at the PMMA/NFC interface, the nanofibrils were covalently grafted with PMMA. Formation of a percolating nanofibril network was observed between 1 and 5 wt.% of NFC by dynamic rotational rheometry in molten state. This observation was further supported by the behavior of glass transition temperature which decreased at low NFC concentrations but recovered above the percolation threshold, indicating a decreased mobility of the matrix polymer. This effect was more pronounced with ungrafted NFC, possibly due to a stronger network. The unmodified NFC induced a minor degradation of the molar mass of PMMA. As thin plates, the composites were transparent at low NFC concentrations but became partially aggregated at the highest NFC concentrations. Despite the continuous NFC network, tensile testing showed no improvement of the mechanical properties.

  8. Direct measurements of the mechanical strength of carbon nanotube-poly(methyl methacrylate) interfaces.

    PubMed

    Chen, Xiaoming; Zheng, Meng; Park, Cheol; Ke, Changhong

    2013-10-11

    Understanding the interfacial stress transfer between carbon nanotubes (CNTs) and polymer matrices is of great importance to the development of CNT-reinforced polymer nanocomposites. In this paper, an experimental study is presented of the interfacial strength between individual double-walled CNTs and poly(methyl methacrylate) (PMMA) using an in situ nanomechanical single-tube pull-out testing scheme inside a high-resolution electron microscope. By pulling out individual tubes with different embedded lengths, this work reveals the shear lag effect on the nanotube-polymer interface and demonstrates that the effective interfacial load transfer occurs only within a certain embedded length. These results show that the CNT-PMMA interface possesses an interfacial fracture energy within 0.054-0.80 J/m(2) and a maximum interfacial strength within 85-372 MPa. This work is useful to better understand the local stress transfer on nanotube-polymer interfaces. PMID:23606544

  9. Phase Behavior of Star-shaped polystyrene-block-poly(methyl methacrylate) Copolymers

    NASA Astrophysics Data System (ADS)

    Jang, Sangshin; Moon, Hongchul; Lee, Youngmin; Kim, Jin Kon

    2012-02-01

    Star-shaped polystyrene-block-poly(methyl methacrylate) copolymer (PS-b-PMMA) was synthesized by utilizing α-cyclodextrin (α-CD) as a junction point of the star-shaped block copolymer. Eighteen hydroxyl groups on α-CD were substituted with bromine by the reaction with α-bromoisobutyryl bromide for atom transfer radical polymerization. We found that the number of bromine substituted arms per one α-CD was higher than 16 measured by nuclear magnetic resonance and Matrix-assisted laser desorption/ionization. We could control molecular weight of this unusual kind of block copolymer depending on polymerization times. Those polymers were characterized by gel permeation chromatography and nuclear magnetic resonance. Phase behavior of these star-shaped block copolymers were investigated.

  10. Phase behavior of multi-arm star-shaped polystyrene-block-poly(methyl methacrylate) copolymer

    NASA Astrophysics Data System (ADS)

    Jang, Sangshin; Moon, Hong Chul; Bae, Dusik; Kwak, Jonghen; Kim, Jin Kon

    2013-03-01

    We synthesized star-shaped polystyrene-block-poly(methyl methacrylate) copolymer (PS- b-PMMA) by utilizing α-cyclodextrin (α-CD) as a core of the star-shaped block copolymer. Eighteen hydroxyl groups on α-CD were transformed to bromine by the reaction with α-bromoisobutyryl bromide. We found that the number of bromine substituted arms per one α-CD was higher than 16, which was determined by nuclear magnetic resonance and Matrix-assisted laser desorption/ionization. We could control molecular weight of block copolymers by changing polymerization times. The block copolymers were characterized by gel permeation chromatography and nuclear magnetic resonance. Phase behaviors of these star-shaped block copolymers were investigated by small angle X-ray scattering and transmission electron microscopy.

  11. Evaluation of Bone Regeneration on Polyhydroxyethyl-polymethyl Methacrylate Membrane in a Rabbit Calvarial Defect Model.

    PubMed

    Kim, Somin; Hwang, Yawon; Kashif, Muhammad; Jeong, Dosun; Kim, Gonhyung

    This study was conducted to evaluate the capacity of guiding bone regeneration of polyhydroxyethyl-polymethyl methacrylate (PHEMA-PMMA) membrane as a guided tissue regeneration membrane for bone defects. Two 8-mm diameter transosseous round defects were made at the parietal bone of 18 New Zealand White rabbits. Defects were covered with or without PHEMA-PMMA membrane. Radiological and histological evaluation revealed that the bone tissue over the defect was more regenerated with time in both groups. However, there was significantly more bone regeneration at 8 weeks in the experimental group than the control group (p<0.05). There was no sign of membrane degradation or tissue inflammation and no invasion of muscle and fibrous tissue into defects. PHEMA-PMMA is a potential material for guided tissue regeneration membrane as it induces no adverse tissue reaction and effectively supports selective bone regeneration.

  12. Development and characterisation of molecularly imprinted polymers based on methacrylic acid for selective recognition of drugs.

    PubMed

    Shi, Xizhi; Wu, Aibo; Qu, Guorun; Li, Rongxiu; Zhang, Dabing

    2007-09-01

    Specific molecularly imprinted polymers (MIPs) for the drug reserpine (RES) using methacrylic acid (MAA) as the functional monomer were developed and characterised for the first time in this study. Evaluation of the various polymers by binding assays indicated that the optimum ratio of functional monomer to template was 4:1. Furthermore, the imprinting effect of the MIPs was assessed by the chromatographic method, which demonstrated that the MIPs had better chromatographic behavior and selectivity than those of the corresponding NIPs. A combination of BET, NMR, UV spectroscopy, and MISPE analyses for investigation of the imprinting and recognition properties revealed that strong specific interactions between the functional monomer and RES in the prepolymerization solutions and the aqueous solutions were probably responsible for RES recognition. The preparation of RES MIPs and elucidation of imprinting and recognition mechanisms may serve as useful references for other drug MIPs.

  13. Crosslinked polymer gel electrolytes based on polyethylene glycol methacrylate and ionic liquid for lithium battery applications

    SciTech Connect

    Liao, Chen; Sun, Xiao-Guang; Dai, Sheng

    2013-01-01

    Gel polymer electrolytes were synthesized by copolymerization polyethylene glycol methyl ether methacrylate with polyethylene glycol dimethacrylate in the presence of a room temperature ionic liquid, methylpropylpyrrolidinium bis(trifluoromethanesulfonyl)imide (MPPY TFSI). The physical properties of gel polymer electrolytes were characterized by thermal analysis, impedance spectroscopy, and electrochemical tests. The ionic conductivities of the gel polymer electrolytes increased linearly with the amount of MPPY TFSI and were mainly attributed to the increased ion mobility as evidenced by the decreased glass transition temperatures. Li||LiFePO4 cells were assembled using the gel polymer electrolytes containing 80 wt% MPPY TFSI via an in situ polymerization method. A reversible cell capacity of 90 mAh g 1 was maintained under the current density of C/10 at room temperature, which was increased to 130 mAh g 1 by using a thinner membrane and cycling at 50 C.

  14. Non-viscoelastic Alloy by Reactive Blending of Nylon with Poly(ethylene-co-glycidyl methacrylate)

    NASA Astrophysics Data System (ADS)

    Sato, Daisuke; Kadowaki, Yuji; Ishibashi, Junya; Kobayashi, Sadayuki; Inoue, Takashi

    Polyamide (PA) was blended with a reactive polyolefin, poly(ethylene-co-glycidyl methacrylate), using an extremely long (L/D=100, L: screw length, D: screw diameter) twin-screw extruder. The reactive blending yielded a unique morphology of the sub-μm polyolefin particles in which 20 nm PA micelles were occluded. It implies that the in situ-formed graft copolymer was pulled in the dispersed particles. The blend showed ultra-high toughness (non-break at Izod impact test) and non-viscoelastic tensile property: the higher deformation rate led to the lower modulus and the larger elongation at break. In the tensile stress-strain curve, the sharp yielding point characteristic to crystalline polymer was hardly seen and the necking stress was maintained almost constant without strain hardening. It suggests a potential application for the energy absorbing car parts, to be friendly for pedestrian and driver.

  15. The role and impact of rubber in poly(methyl methacrylate)/lithium triflate electrolyte

    NASA Astrophysics Data System (ADS)

    Latif, Famiza; Aziz, Madzlan; Katun, Nasir; Ali, Ab Malik Marwan; Yahya, Muhd Zuazhan

    In this research, new thin freestanding films of poly(methyl methacrylate) (PMMA)/50% epoxidised natural rubber (ENR 50) were doped with lithium triflate, LiCF 3SO 3 salt was prepared by a solvent casting method. The incorporation of ENR 50 is found to increase the conductivity of PMMA/LiCF 3SO 3 by two orders of magnitude at room temperature. The highest conductivity achieved was 5.09 × 10 -5 S cm -1 at room temperature when 60% of LiCF 3SO 3 salt was introduced into the PMMA blend containing 10% ENR 50. The formation of excessive hydrogen bonds and interchain crosslinking limit the performance of the blend at higher concentrations of ENR 50. The ionic conduction mechanisms in PMMA/ENR 50/LiCF 3SO 3 electrolytes obey the Arrhenius rule in which the ion transport in these materials is thermally assisted.

  16. Synthesis, characterization and fluorescence studies of novel bi-phenyl based acrylate and methacrylate

    NASA Astrophysics Data System (ADS)

    Baskar, R.; Subramanian, K.

    2011-09-01

    4-[(1 E)-3-(biphenyl-4-yl)buta-1,3-dien-1-yl]phenyl prop-2-enoate ( ACH) and 4-[(1 E)-3-(biphenyl-4-yl)buta-1,3-dien-1-yl]phenyl 2-methylprop-2-enoate ( MCH) was synthesized from biphenyl in three steps and their structures were confirmed by elemental analysis, IR, NMR ( 1H, 13C, DEPT135, 1H- 1H COSY, 1H- 13C HSQC and 1H- 13C HMBC) spectroscopic techniques. In this present study, various physicochemical characteristics we demonstrate solubility, color, absorbance and fluorescence property of novel biphenyl based acrylate and methacrylate measured in different solvents like benzene, dichloromethane, tetrahydrofuran, acetonitrile, dimethylsulfoxide and ethanol.

  17. Air plasma processing of poly(methyl methacrylate) micro-beads: Surface characterisations

    NASA Astrophysics Data System (ADS)

    Liu, Chaozong; Cui, Nai-Yi; Osbeck, Susan; Liang, He

    2012-10-01

    This paper reports the surface processing of poly(methyl methacrylate) (PMMA) micro-beads by using a rotary air plasma reactor, and its effects on surface properties. The surface properties, including surface wettability, surface chemistry and textures of the PMMA beads, were characterised. It was observed that the air plasma processing can improve the surface wettability of the PMMA microbeads significantly. A 15 min plasma processing can reduce the surface water contact angle of PMMA beads to about 50° from its original value of 80.3°. This was accompanied by about 8% increase in surface oxygen concentration as confirmed by XPS analysis. The optical profilometry examination revealed the air plasma processing resulted in a rougher surface that has a “delicate” surface texture. It is concluded that the surface chemistry and texture, induced by air plasma processing, co-contributed to the surface wettability improvement of PMMA micro-beads.

  18. Tuning of cross-linking and mechanical properties of laser-deposited poly (methyl methacrylate) films

    NASA Astrophysics Data System (ADS)

    Süske, Erik; Scharf, Thorsten; Krebs, Hans-Ulrich; Panchenko, Elena; Junkers, Thomas; Egorov, Mark; Buback, Michael; Kijewski, Harald

    2005-03-01

    The chemical composition, amount of cross-linking and its influence on the mechanical properties of poly(methyl methacrylate) (PMMA) thin films produced by pulsed laser deposition (PLD) at a wavelength of 248nm under ultrahigh vacuum were investigated by infrared spectroscopy, scanning electron microscopy, size-exclusion chromatography, thermogravimetric analysis, and nanoindentation experiments. The films consist of two components, one fraction with a molecular weight well below that of the target material and a second fraction, which is cross-linked. Compared to bulk material, the Young's modulus of the film is increased. The amount of cross-linking in the film can be tuned by the applied laser fluence leading to changes of the mechanical properties.

  19. Radiation grafting of oligo(ethylene glycol) ethyl ether methacrylate on polypropylene

    NASA Astrophysics Data System (ADS)

    Komasa, Justyna; Miłek, Andrzej; Ulański, Piotr; Rosiak, Janusz M.

    2014-01-01

    Oligo(ethylene glycol) ethyl ether methacrylate (OEGMA) can be grafted onto polypropylene (PP) films by post-irradiation grafting, forming a thermosensitive polymer layer, as indicated by FT-IR and contact angle measurements. In the first step, PP foils are irradiated by electron beam (5.5 kGy/min, up to 300 kGy) in the presence of air. Subsequently, the irradiated foils react with the monomer in oxygen-free solutions in isopropanol (up to 2 M of monomer) at 70 °C. Degree of grafting of OEGMA can be controlled by proper selection of absorbed dose, monomer concentration and reaction time. This work is a part of a broader project on thermosensitive materials facilitating cell growth and detachment for optimizing cell layer engineering techniques in the treatment of burn wounds.

  20. Hydrophobic modification of cellulose isolated from Agave angustifolia fibre by graft copolymerisation using methyl methacrylate.

    PubMed

    Rosli, Noor Afizah; Ahmad, Ishak; Abdullah, Ibrahim; Anuar, Farah Hannan; Mohamed, Faizal

    2015-07-10

    Graft copolymerisation of methyl methacrylate (MMA) onto Agave angustifolia was conducted with ceric ammonium nitrate (CAN) as the redox initiator. The maximum grafting efficiency was observed at CAN and MMA concentrations of 0.91 × 10(-3) and 5.63 × 10(-2)M, respectively, at 45°C for 3h reaction time. Four characteristic peaks at 2995, 1738, 1440, and 845 cm(-1), attributed to PMMA, were found in the IR spectrum of grafted cellulose. The crystallinity index dropped from 0.74 to 0.46, while the thermal stability improved upon grafting. The water contact angle increased with grafting yield, indicating increased hydrophobicity of cellulose. SEM images showed the grafted cellulose to be enlarged and rougher. The changes in the physical nature of PMMA-grafted cellulose can be attributed to the PMMA grafting in the amorphous regions of cellulose, causing it to expand at the expense of the crystalline component. PMID:25857961

  1. Dissolution And Swelling Studies Of Poly(Methyl Methacrylate) Resist Films

    NASA Astrophysics Data System (ADS)

    Papanu, J. S.; Manjkow, J.; Hess, D. W.; Soong, D. S.; Bell, A. T.

    1987-08-01

    The swelling and dissolution of thin film poly(methyl methacrylate), PMMA, in methyl isobutyl ketone (MIBK), and in solvent/nonsolvent mixtures of MIBK/methanol and methyl ethyl ketone/isopropanol have been investigated. Films were monitored using in situ ellipsometry. Parametric studies of the effects of molecular weight, molecular weight distribution, softbaking quench rate, solvent size, and temperature were performed with MIBK. These parameters were shown to have a significant effect on dissolution. The effects of solvent composition and temperature on swelling and dissolution were investigated with the binary solvents. Ternary diagrams based on Flory-Huggins interaction parameters were used to interpret the thermodynamics of swelling and dissolution. A narrow transition region (NTR) where the developer changed from a swelling to dissolving agent with a small change in composition or temperature was observed.

  2. Direct measurements of the mechanical strength of carbon nanotube-poly(methyl methacrylate) interfaces.

    PubMed

    Chen, Xiaoming; Zheng, Meng; Park, Cheol; Ke, Changhong

    2013-10-11

    Understanding the interfacial stress transfer between carbon nanotubes (CNTs) and polymer matrices is of great importance to the development of CNT-reinforced polymer nanocomposites. In this paper, an experimental study is presented of the interfacial strength between individual double-walled CNTs and poly(methyl methacrylate) (PMMA) using an in situ nanomechanical single-tube pull-out testing scheme inside a high-resolution electron microscope. By pulling out individual tubes with different embedded lengths, this work reveals the shear lag effect on the nanotube-polymer interface and demonstrates that the effective interfacial load transfer occurs only within a certain embedded length. These results show that the CNT-PMMA interface possesses an interfacial fracture energy within 0.054-0.80 J/m(2) and a maximum interfacial strength within 85-372 MPa. This work is useful to better understand the local stress transfer on nanotube-polymer interfaces.

  3. Raman spectra of bilayer graphene covered with Poly(methyl methacrylate) thin film

    SciTech Connect

    Xia Minggang; Su Zhidan; Zhang Shengli

    2012-09-15

    The Raman spectra of bilayer graphene covered with poly(methyl methacrylate) (PMMA) were investigated. Both the G and 2D peaks of PMMA-coated graphene were stiff and broad compared with those of uncovered graphene. This could be attributed to the residual strain induced by high-temperature baking during fabrication of the nanodevice. Furthermore, the two 2D peaks stiffened and broadened with increasing laser power, which is just the reverse to uncovered graphene. The stiffness is likely caused by graphene compression induced by the circular bubble of the thin PMMA film generated by laser irradiation. Our findings may contribute to the application of PMMA in the strain engineering of graphene nanodevices.

  4. Surface-initiated atom transfer radical polymerization of methyl methacrylate from magnetite nanoparticles at ambient temperature.

    PubMed

    Raghuraman, G K; Dhamodharan, R

    2006-07-01

    The synthesis of methyl methacrylate (MMA) brush from the surface of magnetite nanoparticles (core-shell structure), from initiator moieties anchored covalently to the nanoparticles, via room temperature atom transfer radical polymerization (ATRP) is described. The surface-initiated polymerization was carried out from a surface-confined initiator containing a 2-bromoisobutyrate moiety with Cu(I)Br/PMDETA catalytic system. The initiator moiety was covalently anchored to the nanoparticles via a two step modification reaction scheme. Controlled polymerization was observed if ethyl-2-bromoisobutyrate (2-EiBrB) was added as a free/sacrificial initiator. A linear increase of molecular weight and a narrow molecular weight distribution of the PMMA formed in solution, provide evidence for a controlled surface-initiated polymerization, leading to surface-attached polymer brushes under mild conditions. The grafted PMMA provides good stability and dispersibility for the nanoparticles in organic solvents.

  5. Evaluation of Bone Regeneration on Polyhydroxyethyl-polymethyl Methacrylate Membrane in a Rabbit Calvarial Defect Model.

    PubMed

    Kim, Somin; Hwang, Yawon; Kashif, Muhammad; Jeong, Dosun; Kim, Gonhyung

    This study was conducted to evaluate the capacity of guiding bone regeneration of polyhydroxyethyl-polymethyl methacrylate (PHEMA-PMMA) membrane as a guided tissue regeneration membrane for bone defects. Two 8-mm diameter transosseous round defects were made at the parietal bone of 18 New Zealand White rabbits. Defects were covered with or without PHEMA-PMMA membrane. Radiological and histological evaluation revealed that the bone tissue over the defect was more regenerated with time in both groups. However, there was significantly more bone regeneration at 8 weeks in the experimental group than the control group (p<0.05). There was no sign of membrane degradation or tissue inflammation and no invasion of muscle and fibrous tissue into defects. PHEMA-PMMA is a potential material for guided tissue regeneration membrane as it induces no adverse tissue reaction and effectively supports selective bone regeneration. PMID:27566076

  6. A new rapid silver impregnation for neuronal bodies on methacrylate sections.

    PubMed

    Tolivia, D; Tolivia, J

    1991-02-01

    A simple and rapid method for the impregnation of neuronal bodies applicable to methacrylate embedded sections is described in the present paper. Sections of 10-12 microns in thickness were attached to slides, placed in mordant for 1 min, rinsed in distilled water and impregnated in ammoniacal silver solution for 1 min. They were then rinsed in absolute ethanol for 30 s and developed in 50% formalin. Sections were toned in 0.25% gold chloride, reduced in 10% oxalic acid and fixed in 5% sodium thiosulfate. After washing, the sections were dehydrated through 90% and absolute ethanol, cleared in eucalyptol, and mounted in the usual way. When this method is used most of the neuronal somata and proximal dendritic trees are impregnated. Frequently some glial cell are also weakly impregnated but their density does not obscure the neurons.

  7. Preparation And Lithographic Properties Of Poly(Trimethylsilylmethyl Methacrylate-Co-Chloromethyl Styrene)

    NASA Astrophysics Data System (ADS)

    Novembre, Anthony E.; Reichmanis, Elsa; Davis, Myrtle

    1986-07-01

    The random copolymer comprised of trimethylsilylmethyl methacrylate (SI) and chloromethyl styrene (CMS) is shown to function as a negative acting e-beam and deep UV resist. The resist is prepared using free radical solution polymerization techniques. Reactivity ratios were calculated using the least squares treatment of Fineman-Ross, and were determined to be 0.49 and 0.54 for SI and CMS, respectively. This material exhibits etching resistance in an 02 reactive ion etching discharge, and is applicable to bileveli pthographic processes. The resist system exhibits an e-beam and deep UV sensitivity (pg. ) equal to 1.95 11C/cm2 and 18mJ/cm2, respectively. The ratio of etching rates of the planarizing layer HPR-206 to this material is 12 to 1 in 02. Preliminary results indicate this system to have submicron resolution capability.

  8. Facile One-step Micropatterning Using Photodegradable Methacrylated Gelatin Hydrogels for Improved Cardiomyocyte Organization and Alignment

    PubMed Central

    Tsang, Kelly M.C.; Annabi, Nasim; Ercole, Francesca; Zhou, Kun; Karst, Daniel; Li, Fanyi; Haynes, John M.; Evans, Richard A.; Thissen, Helmut

    2015-01-01

    Hydrogels are often employed as temporary platforms for cell proliferation and tissue organization in vitro. Researchers have incorporated photodegradable moieties into synthetic polymeric hydrogels as a means of achieving spatiotemporal control over material properties. In this study protein-based photodegradable hydrogels composed of methacrylated gelatin (GelMA) and a crosslinker containing o-nitrobenzyl ester groups have been developed. The hydrogels are able to degrade rapidly and specifically in response to UV light and can be photopatterned to a variety of shapes and dimensions in a one-step process. Micropatterned photodegradable hydrogels are shown to improve cell distribution, alignment and beating regularity of cultured neonatal rat cardiomyocytes. Overall this work introduces a new class of photodegradable hydrogel based on natural and biofunctional polymers as cell culture substrates for improving cellular organization and function. PMID:26327819

  9. Synthesis, characterization, and antimicrobial activity of poly(acrylonitrile-co-methyl methacrylate) with silver nanoparticles.

    PubMed

    El-Aassar, M R; Hafez, Elsayed E; Fouda, Moustafa M G; Al-Deyab, Salem S

    2013-10-01

    Nanotechnology is expected to open some new aspects to fight and prevent diseases using atomic-scale tailoring of materials. The main aim of this study is to biosynthesize silver nanoparticles (AgNPs) using Trichoderma viride (HQ438699); the metabolite of this fungus will help either in reduction of the silver nitrate-adding active materials which will be loaded on the surface of the produced AgNPs. Poly(acrylonitrile-co-methyl methacrylate) copolymer (poly (AN-co-MMA)) was grafted with the prepared AgNPs. The poly(AN-co-MMA)/AgNPs were examined against ten different pathogenic bacterial strains, and the result was compared with another four different generic antibiotics. The produced poly(AN-co-MMA)/AgNPs showed high antibacterial activity compared with the four standard antibiotics. Moreover, the grafting of these AgNPs into the copolymer has potential application in the biomedical field. PMID:23873643

  10. Preparation of medical magnetic nanobeads with ferrite particles encapsulated in a polyglycidyl methacrylate (GMA) for bioscreening

    SciTech Connect

    Nishibiraki, H.; Kuroda, C.S.; Maeda, M.; Matsushita, N.; Abe, M.; Handa, H.

    2005-05-15

    Ferrite nanoparticles (an intermediate between Fe{sub 3}O{sub 4} and {gamma}-Fe{sub 2}O{sub 3}), {approx}7 nm in diameter, were embedded in beads of a mixed polymer of styrene (St) and glycidyl methacrylate (GMA) by emulsifier-free emulsion polymerization method. The beads were coated with GMA by a seeded polymerization method in order to suppress nonspecific protein binding on the surfaces; GMA exhibits very low nonspecific protein binding, which is required for carriers used for bioscreening. The beads have diameters of 180{+-}50 nm and saturation magnetizations of 28 emu/g, exceeding commercially available polymer-coated beads of micron size having a weaker saturation magnetization ({approx}12 emu/g)

  11. Interaction between physical aging, deformation, and segmental mobility in poly(methyl methacrylate) glasses

    NASA Astrophysics Data System (ADS)

    Lee, Hau-Nan; Ediger, M. D.

    2010-07-01

    Optical photobleaching experiments were used to investigate the interaction between physical aging, segmental mobility, and mechanical properties in polymer glasses. Mechanical creep experiments were performed on lightly cross-linked poly(methyl methacrylate) glasses with systematically varying aging histories. By directly measuring the molecular mobility of polymer glasses under deformation, we observe that stresses in the preflow regime and flow regime have qualitatively different influences on the aging process. In the preflow regime, the effects of aging and stress on mobility act as two independent processes; stress causes an increase in segmental mobility but does not erase the influence of previous aging. In contrast, as a sample enters the flow regime, plastic deformation takes the glass into a high mobility state that is independent of any predeformation aging history.

  12. Cellulose functionalization via high-energy irradiation-initiated grafting of glycidyl methacrylate and cyclodextrin immobilization

    NASA Astrophysics Data System (ADS)

    Desmet, Gilles; Takács, Erzsébet; Wojnárovits, László; Borsa, Judit

    2011-12-01

    Cotton-cellulose was functionalized using gamma-irradiation-induced grafting of glycidyl methacrylate (GMA) to obtain a hydrophobic cellulose derivative with epoxy groups suitable for further chemical modification. Two grafting techniques were applied. In pre-irradiation grafting (PIG) cellulose was irradiated in air and then immersed in a GMA monomer solution, whereas in simultaneous grafting (SG) cellulose was irradiated in an inert atmosphere in the presence of the monomer. PIG led to a more homogeneous fiber surface, while SG resulted in higher grafting yield but showed clear indications of some GMA-homopolymerization. Effects of the reaction parameters (grafting method, absorbed dose, monomer concentration, solvent composition) were evaluated by SEM, gravimetry (grafting yield) and FTIR spectroscopy. Water uptake of the cellulose decreased while adsorption of a pesticide molecule increased upon grafting. The adsorption was further enhanced by β-cyclodextrin immobilization during SG. This method can be applied to produce adsorbents from cellulose based agricultural wastes.

  13. Thermoelastic temperature changes in poly(methyl methacrylate) at high hydrostatic pressure: Experimental

    NASA Astrophysics Data System (ADS)

    Rodriquez, E. L.; Filisko, F. E.

    1982-10-01

    Temperature changes as a result of large rapid hydrostatic pressure changes were measured for poly(methyl methacrylate) at various temperatures from ambient to 95 °C and for various pressure increments from 14 to 207 MN/m2. We observe complete reversibility of the measurements over the pressure range studied. The value of the incremental ratio ΔT/ΔP was a function of both temperature and pressure, ranging from 0.04 to 0.09 K/MNm-2 from 298 to 368 K at low pressures, and 0.03-0.05 at 200 MN/m2 over the same temperature range. The largest variation of ΔT/ΔP with pressure was at low pressures, the ratio becoming nearly constant above about 200 MN/M2.

  14. Novel (meth)acrylate monomers for ultrarapid polymerization and enhanced polymer properties

    SciTech Connect

    Beckel, E. R.; Berchtold, K. A.; Nie, J.; Lu, H.; Stansbury, J. W.; Bowman, C. N.

    2002-01-01

    Ultraviolet light is known to be one of the most efficient methods to initiatc polymeric reactions in the presence of a photonitiator. Photopolymerizations are advantageous because the chemistry of the materials can be tailored to design liquid monomers for ultrarapid polymerization into a solid polymer material. One way to achieve rapid photopolymerizations is to utilize multifunctional (meth)acrylate monomers. which form highly crosslinked polymers; however, these monomers typically do not achieve complete functional group conversion. Recently, Decker et al. developed novel monovinyl acrylate monomers that display polyriicrization kinetics that rival those of multifunctional acrylate monomers. These novel acrylate monomers incorporate secondary functionalities and end groups such as carbonates, carbamates, cyclic carbonates and oxazolidone which promote the increased polymerization kinetics of these monomers. In addition to thc polynierization kinetics, these novel monovinyl monomers form crosslinked polymers, which are characterized by having high strength and high flexibility. Unfortunately, the exact mechanism or mechanisms responsible for the polymerization kinetics and crosslinking are not well understood.

  15. Near-field mapping of plasmonic antennas by multiphoton absorption in poly(methyl methacrylate).

    PubMed

    Volpe, Giorgio; Noack, Monika; Aćimović, Srdjan S; Reinhardt, Carsten; Quidant, Romain

    2012-09-12

    Mapping the optical near-field response around nanoantennas is a challenging yet indispensable task to engineer light-matter interaction at the nanometer scale. Recently, photosensitive molecular probes, which undergo morphological or chemical changes induced by the local optical response of the nanostructures, have been proposed as a handy alternative to more cumbersome optical and electron-based techniques. Here, we report four-photon absorption in poly(methyl methacrylate) (PMMA) as a very promising tool for nanoimaging the optical near-field around nanostructures over a broad range of near-infrared optical wavelengths. The high performance of our approach is demonstrated on single-rod antennas and coupled gap antennas by comparing experimental maps with 3D numerical simulations of the electric near-field intensity.

  16. Poly(methacrylic acid)-mediated morphosynthesis of PbWO4 micro-crystals

    NASA Astrophysics Data System (ADS)

    Yu, J. G.; Zhao, X. F.; Liu, S. W.; Li, M.; Mann, S.; Ng, D. H. L.

    2007-04-01

    PbWO4 crystals with various morphologies were fabricated via a facile poly(methacrylic acid)-mediated hydrothermal route. Novel microsized PbWO4 single crystals with a needle-like shape as well as other morphologies, such as a fishbone, dendrite, sphere, spindle, ellipsoid, rod, and dumbbell with two dandelion-like heads, could be produced. The presence of PMAA, [Pb2+]/[WO4 2-] molar ratio (R), and aging temperature played key roles in the formation of the PbWO4 needle-like structures. Between temperatures of 60 to 150 °C, the length and photoluminescence intensities of the PbWO4 micro needles significantly increased with aging temperature, while the diameter did not change remarkably. Time-dependent experiments revealed that the formation of PbWO4 microneedles involved an unusual growth process, involving nucleation, oriented assembly and controlled mesoscale restructuring of nanoparticle building blocks.

  17. Poly(N-vinylcaprolactam-co-methacrylic acid) hydrogel microparticles for oral insulin delivery.

    PubMed

    Mundargi, Raghavendra C; Rangaswamy, Vidhya; Aminabhavi, Tejraj M

    2011-01-01

    pH-sensitive copolymeric hydrogels prepared from N-vinylcaprolactam and methacrylic acid monomers by free radical polymerization offered 52% encapsulation efficiency and evaluated for oral delivery of human insulin. The in vitro experiments performed on insulin-loaded microparticles in pH 1.2 media (stomach condition) demonstrated no release of insulin in the first 2 h, but almost 100% insulin was released in pH 7.4 media (intestinal condition) in 6 h. The carrier was characterized by Fourier transform infrared, differential scanning calorimeter, thermogravimetry and nuclear magnetic resonance techniques to confirm the formation of copolymer, while scanning electron microscopy was used to assess the morphology of hydrogel microparticles. The in vivo experiments on alloxan-induced diabetic rats showed the biological inhibition up to 50% and glucose tolerance tests exhibited 44% inhibition. The formulations of this study are the promising carriers for oral delivery of insulin.

  18. Fabrication of Poly (methyl methacrylate) and Poly(vinyl alcohol) Thin Film Capacitors on Flexible Substrates

    NASA Astrophysics Data System (ADS)

    Salim, Bindu; Meenaa Pria KNJ, Jaisree; Alagappan, M.; Kandaswamy, A.

    2015-11-01

    Flexible electronics is becoming more popular with introduction of more and more organic conducting materials and processes for making thin films. The use of polymers as gate dielectric has over ruled the usage of conventional inorganic oxides in Organic Thin Film Transistors (OTFTs) on account of its solution process ability and ease of making highly insulating thin film. In this work Capacitance is fabricated with polymeric dielectrics namely poly (methyl methacrylate) - PMMA and poly (vinyl alcohol) - PVA. The electrodes used for these capacitors are Indium Tin Oxide (ITO) and Aluminium. Capacitance value of 9.5nF/cm2 and 33.12nF/cm2 is achieved for thickness of 510 nm of PMMA and 80 nm of PVA respectively. This study on capacitance can be used for assessing the suitability of these polymers as gate insulators in OTFTs.

  19. Mechanical properties of methacrylate-based model dentin adhesives: effect of loading rate and moisture exposure.

    PubMed

    Singh, Viraj; Misra, Anil; Parthasarathy, Ranganathan; Ye, Qiang; Park, Jonggu; Spencer, Paulette

    2013-11-01

    The aim of this study is to investigate the mechanical behavior of model methacrylate-based dentin adhesives under conditions that simulate the wet oral environment. A series of monotonic and creep experiments were performed on rectangular beam samples of dentin adhesive in three-point bending configuration under different moisture conditions. The monotonic test results show a significant effect of loading rate on the failure strength and the linear limit (yield point) of the stress-strain response. In addition, these tests show that the failure strength is low, and the failure occurs at a smaller deformation when the test is performed under continuously changing moisture conditions. The creep test results show that under constant moisture conditions, the model dentin adhesives can have a viscoelastic response under certain low loading levels. However, when the moisture conditions vary under the same low loading levels, the dentin adhesives have an anomalous creep response accompanied by large secondary creep and high strain accumulation. PMID:23744598

  20. Miniemulsion fabricated Fe3O4/poly(methyl methacrylate) composite particles and their magnetorheological characteristics

    NASA Astrophysics Data System (ADS)

    Park, B. O.; Song, K. H.; Park, B. J.; Choi, H. J.

    2010-05-01

    In order to improve drawbacks such as sedimentation of magnetic particles and abrasion of the magnetorheological (MR) fluid, we have fabricated Fe3O4/poly(methyl methacrylate) (PMMA) composite particles via a double miniemulsion method and studied their MR properties. Morphology and chemical composition of the synthesized Fe3O4/PMMA composite particles were investigated by transmission electron microscopy and Fourier transform infrared, respectively. The density of the Fe3O4/PMMA composite particles was measured to be lower than that of the as-synthesized Fe3O4 particles, indicative of an improvement of the composite particles to stay dispersed. Rheological characteristics of the Fe3O4/PMMA based MR fluid dispersed in a nonmagnetic carrier fluid were measured by both static and dynamic tests using a rotational rheometer under an external magnetic field. Shear stress, yield stress, and storage modulus from the rheological measurements were obtained to be increased with applied magnetic field strengths.

  1. Hydrophobic modification of cellulose isolated from Agave angustifolia fibre by graft copolymerisation using methyl methacrylate.

    PubMed

    Rosli, Noor Afizah; Ahmad, Ishak; Abdullah, Ibrahim; Anuar, Farah Hannan; Mohamed, Faizal

    2015-07-10

    Graft copolymerisation of methyl methacrylate (MMA) onto Agave angustifolia was conducted with ceric ammonium nitrate (CAN) as the redox initiator. The maximum grafting efficiency was observed at CAN and MMA concentrations of 0.91 × 10(-3) and 5.63 × 10(-2)M, respectively, at 45°C for 3h reaction time. Four characteristic peaks at 2995, 1738, 1440, and 845 cm(-1), attributed to PMMA, were found in the IR spectrum of grafted cellulose. The crystallinity index dropped from 0.74 to 0.46, while the thermal stability improved upon grafting. The water contact angle increased with grafting yield, indicating increased hydrophobicity of cellulose. SEM images showed the grafted cellulose to be enlarged and rougher. The changes in the physical nature of PMMA-grafted cellulose can be attributed to the PMMA grafting in the amorphous regions of cellulose, causing it to expand at the expense of the crystalline component.

  2. Enhancement of impact strength of poly (methyl methacrylate) with surface fine-tuned nano-silica

    NASA Astrophysics Data System (ADS)

    Wen, Bin; Dong, Yixiao; Wu, Lili; Long, Chao; Zhang, Chaocan

    2015-07-01

    Highly dispersible nanoparticles in organic solvent always receive wide interests due to their compatibility with polymer materials. This paper reported a kind of isopropanol alcohol silica dispersion which obtained using a method of azeotropic distillation. The isopropanol alcohol dispersed silica (IPADS) were treated with coupling agents to fine-tune their surface properties. Polymethyl methacrylate (PMMA) was then used as a research object to test the compatibility between IPADS and polymer. UV-vis spectra indicate that IPADS would reach its high compatibility with PMMA if coupling with trimethoxypropylsilane (PTMS). Followed experiments on PMMA proved that the high compatibility can prominently enhance the impact strength about 30%. The results may provide reference both for nano-silica modification and better understanding of nano-enhanced materials.

  3. Dye-attached magnetic poly(hydroxyethyl methacrylate) nanospheres for albumin depletion from human plasma.

    PubMed

    Gökay, Öznur; Karakoç, Veyis; Andaç, Müge; Türkmen, Deniz; Denizli, Adil

    2015-02-01

    The selective binding of albumin on dye-affinity nanospheres was combined with magnetic properties as an alternative approach for albumin depletion from human plasma. Magnetic poly(hydroxyethyl methacrylate) (mPHEMA) nanospheres were synthesized using mini-emulsion polymerization method in the presence of magnetite powder. The specific surface area of the mPHEMA nanospheres was found to be 1302 m(2)/g. Subsequent to Cibacron Blue F3GA (CB) immobilization onto mPHEMA nanospheres, a serial characterization processing was implemented. The quantity of immobilized CB was calculated as 800 μmol/g. Ultimately, albumin adsorption performance of the CB-attached mPHEMA nanospheres from both aqueous dissolving medium and human plasma were explored.

  4. Phosphate sensor based on immobilized aluminium-morin in poly (glycidyl methacrylate) microspheres

    NASA Astrophysics Data System (ADS)

    Ahmad, Amalina; Hanifah, Sharina Abu; Hasbullah, Siti Aishah; Suhud, Khairi; Zaini, Norhadisah Mohd; Heng, Lee Yook

    2014-09-01

    This paper reports the development of dihydrogen phosphate ion (H2PO4-) sensor in free solution and immobilized aluminium-morin (Al-Mo) complex on poly(glycidyl methacrylate) (pGMA) microspheres. The immobilization was carried out by suspension photopolymerization technique. Based on Al-Mo solution work, phosphate can be detected from 0.1 - 15.0 ppm of dihydrogen phosphate at pH 5. Phosphate detection only takes about 5 minutes. Morphology analyses showed that the immobilization of Aluminium-Morin complex maintained the size of the microspheres and proved that entrapment involves in the formation of the microspheres. This result is further explained by Attenuated Total Reflectance (ATR) spectrum which does not show any formation of new bands. The microspheres were then used for further applications.

  5. Electron capture of dopants in two-photonic ionization in a poly(methyl methacrylate) solid

    SciTech Connect

    Tsuchida, Akira; Sakai, Wataru; Nakano, Mitsuru; Yamamoto, Masahide

    1992-10-29

    Behavior of the electron produced by two-photonic excitation of an aromatic donor in a poly(methyl methacrylate) solid was studied by the addition of the electron scavengers to the system. According to the Perrin type analysis for the two-photonically ejected electron, the capture radii (R{sub c}) of the scavengers examined were estimated to be from 8 to 40 {Angstrom}. For the two-photonically ejected electrons, R{sub c} is a capture radius for thermalized electrons. In this case the parent electron donor is not necessarily within this radius. On the other hand, for the fluorescence quenching, the distance between the donor and acceptor is within the static quenching radius (R{sub q}) of the donor. 13 refs., 4 figs., 2 tabs.

  6. Thermal-induced conversion of maleic and fumaric acid anion radicals in poly(methyl methacrylate)

    SciTech Connect

    Torikai, A.; Fukumoto, M.

    1980-04-01

    Thermal-induced conversion of maleic and fumaric acid anion radicals produced by ..gamma.. irradiation at 77/sup 0/K in poly(methyl methacrylate) (PMMA) was studied by electron spin resonance (ESR) and optical absorption spectroscopic measurements. The ESR spectra of these acid anion radicals change into two-line spectra with a line separation of ca. 10 G by thermal annealing. This spectrum is assigned to a protonated radical of each acid anion radical. Anion radicals of the solutes are relatively stable below the ..gamma.. transition point of PMMA and the conversion reaction takes place near this point. This means that the molecular motion of matrix molecule affects the radical conversion reaction.

  7. Facile Soap-Free Miniemulsion Polymerization of Methyl Methacrylate via Reverse Atom Transfer Radical Polymerization.

    PubMed

    Zhu, Gaohua; Zhang, Lifen; Pan, Xiangqiang; Zhang, Wei; Cheng, Zhenping; Zhu, Xiulin

    2012-12-21

    A facile soap-free miniemulsion polymerization of methyl methacrylate (MMA) was successfully carried out via a reverse ATRP technique, using a water-soluble potassium persulfate (KPS) or 2,2'-azobis(2-methylpropionamidine) dihydrochloride (V-50) both as the initiator and the stabilizer, and using an oil-soluble N,N-n-butyldithiocarbamate copper (Cu(S2CN(C4H9)2)2) as the catalyst without adding any additional ligand. Polymerization results demonstrated the "living"/controlled characteristics of ATRP and the resultant latexes showed good colloidal stability with average particle size around 300-700 nm in diameter. The monomer droplet nucleation mechanism was proposed. NMR spectroscopy and chain-extension experiments under UV light irradiation confirmed the attachment and livingness of UV light sensitive -S-C(=S)-N(C4H9)2 group in the chain end. PMID:23019131

  8. Methyl methacrylate as a healing agent for self-healing cementitious materials

    NASA Astrophysics Data System (ADS)

    Van Tittelboom, K.; Adesanya, K.; Dubruel, P.; Van Puyvelde, P.; De Belie, N.

    2011-12-01

    Different types of healing agents have already been tested on their efficiency for use in self-healing cementitious materials. Generally, commercial healing agents are used while their properties are adjusted for manual crack repair and not for autonomous crack healing. Consequently, the amount of regain in properties due to self-healing of cracks is limited. In this research, a methyl methacrylate (MMA)-based healing agent was developed specifically for use in self-healing cementitious materials. Various parameters were optimized including the viscosity, curing time, strength, etc. After the desired properties were obtained, the healing agent was encapsulated and screened for its self-healing efficiency. The decrease in water permeability due to autonomous crack healing using MMA as a healing agent was similar to the results obtained for manually healed cracks. First results seem promising: however, further research needs to be undertaken in order to obtain an optimal healing agent ready for use in practice.

  9. Multidisciplinary approach for reconstruction of cranial defect with polymethyl methacrylate resin reinforced with titanium mesh.

    PubMed

    Sane, Vikrant Dilip; Kadam, Pankaj; Jadhav, Aniket; Saddiwal, Rashmi; Merchant, Yash

    2016-01-01

    Cranial defects occur most commonly as a sequelae to trauma, the incidence being as high as 70%. The successful management of a case of trauma in an emergency situation requires quick evacuation of the hematoma, repair of the dura, and the scalp but not necessarily the integrity of the calvarial segment as an immediate measure. So the reconstruction of the calvarial defect in these cases is mostly carried out as a secondary procedure. Various materials are used for reconstruction of cranial defects, polymethyl methacrylate (PMMA) resin being one of them. In this article, we report a case which was successfully treated by PMMA resin in combination with a titanium mesh for reconstruction of the cranial defect as a secondary procedure. PMID:27621551

  10. Thermosensitive poly(N-isopropylacrylamide-co-glycidyl methacrylate) microgels for controlled drug release.

    PubMed

    Li, Penghui; Xu, Ruizhen; Wang, Wenhao; Li, Xiaolong; Xu, Zushun; Yeung, Kelvin W K; Chu, Paul K

    2013-01-01

    A new type of thermosensitive microgels with epoxy functional groups is designed and synthesized for drug delivery. The thermosensitive poly(N-isopropylacrylamide-co-glycidyl methacrylate) (designated as P(NIPAM-co-GMA)) microgels are prepared by an emulsifier-free emulsion polymerization method and the chemical composition of the copolymer is determined by Fourier transform infrared spectroscopy (FTIR) and nuclear magnetic resonance ((1)H NMR). The lower critical solution temperature (LCST) of the microgels is 32°C based on the transmittance changes at 500 nm monitored by UV/visible spectrophotometry. The hydrodynamic diameter and morphology of the microgel particles are examined by dynamic light scattering (DLS) and scanning electron microscopy (SEM), respectively. The drug release properties determined using 5-FU as the drug model in vitro reveal temperature dependence and low cytotoxicity. The thermosensitive microgels have large potential as targeted anti-cancer drug carriers. PMID:23010027

  11. Bonding efficacy and side effects of the high purity glyceryl mono-methacrylate.

    PubMed

    Takahashi, Y; Itoh, K; Manabe, A; Tani, C; Hisamitsu, H

    2004-12-01

    The purpose of this study was to examine the efficacy of experimentally developed high purity glyceryl mono-methacrylate (GM) as a dentine primer and to evaluate the possibility of allergic reaction. The efficacy of experimental dentine primers was evaluated by measuring the polymerization contraction gap width and the tensile bond strength. Allergic reaction was evaluated by the guinea-pig maximization test. The skin reaction was evaluated according to the criteria of the International Contact Dermatitis Research Group. Contraction gap formation was completely prevented and the tensile bond strength was not significantly affected by priming with GM on high-purity GM. The allergic response decreased when high-purity GM was employed as the challenger. It was concluded that the clinical use of the high-purity GM is beneficial as the delayed allergic reaction could be avoided with no detrimental effect on the dentine bonding. PMID:15544652

  12. Glycol methacrylate embedding for light microscopy. I. enzyme histochemistry on semithin sections of undecalcified marrow cores.

    PubMed

    Islam, A; Henderson, E S

    1987-10-01

    A simple, routine procedure for water miscible glycol methacrylate (GMA) embedding of undecalcified bone marrow cores, which preserves the activity of enzymes useful in diagnosing various haematopoietic disorders, is described. The GMA used in this study has a low acid content that eliminates background staining, and the modified May-Grünwald-Giemsa stain provides good definition and excellent colour differentiation of various haematopoietic cells in the bone marrow, thereby providing optimal conditions for the study of the morphology and enzyme activity of bone marrow cells in the same preparation. The method is simple, reproducible, requires no expensive equipment, and is suitable for routine processing of small bone marrow cores in any histopathology or haematology laboratory.

  13. New Poly(amino acid methacrylate) Brush Supports the Formation of Well-Defined Lipid Membranes

    PubMed Central

    2015-01-01

    A novel poly(amino acid methacrylate) brush comprising zwitterionic cysteine groups (PCysMA) was utilized as a support for lipid bilayers. The polymer brush provides a 12-nm-thick cushion between the underlying hard support and the aqueous phase. At neutral pH, the zeta potential of the PCysMA brush was ∼−10 mV. Cationic vesicles containing >25% DOTAP were found to form a homogeneous lipid bilayer, as determined by a combination of surface analytical techniques. The lipid mobility as measured by FRAP (fluorescence recovery after photobleaching) gave diffusion coefficients of ∼1.5 μm2 s–1, which are comparable to those observed for lipid bilayers on glass substrates. PMID:25746444

  14. Glycol Methacrylate Embedding for the Histochemical Study of the Gastrointestinal Tract of Dogs Naturally Infected with Leishmania Infantum

    PubMed Central

    Pinto, A.J.W.; de Amorim, I.F.G.; Pinheiro, L.J.; Madeira, I.M.V.M.; Souza, C.C.; Chiarini-Garcia, H.; Caliari, M.V.

    2015-01-01

    In canine visceral leishmaniasis a diffuse chronic inflammatory exudate and an intense parasite load throughout the gastrointestinal tract (GIT) has been previously reported. However, these studies did not allow a properly description of canine cellular morphology details. The aim of our study was to better characterize these cells in carrying out a qualitative and quantitative histological study in the gastrointestinal tract of dogs naturally infected with Leishmania infantum by examining gut tissues embedded in glycol methacrylate. Twelve infected adult dogs were classified in asymptomatic and symptomatic. Five uninfected dogs were used as controls. After necropsy, three samples of each gut segment, including oesophagus, stomach, duodenum, jejunum, ileum, cecum, colon, and rectum were collected and fixed in Carnoy’s solution for glycol methacrylate protocols. Sections were stained with hematoxylin-eosin, toluidine blue borate, and periodic acid-Schiff stain. Leishmania amastigotes were detected by immunohistochemistry employed in both glycol methacrylate and paraffin embedded tissues. The quantitative histological analysis showed higher numbers of plasma cells, lymphocytes and macrophages in lamina propria of all segments of GIT of infected dogs compared with controls. The parasite load was more intense and cecum and colon, independently of the clinical status of these dogs. Importantly, glycol methacrylate embedded tissue stained with toluidine blue borate clearly revealed mast cell morphology, even after mast cell degranulation. Infected dogs showed lower numbers of mast cells in all gut segments than controls. Despite the glycol methacrylate (GMA) protocol requires more attention and care than the conventional paraffin processing, this embedding procedure proved to be especially suitable for the present histological study, where it allowed to preserve and observe cell morphology in fine detail. PMID:26708180

  15. Supramolecular Cross-Links in Poly(alkyl methacrylate) Copolymers and Their Impact on the Mechanical and Reversible Adhesive Properties.

    PubMed

    Heinzmann, Christian; Salz, Ulrich; Moszner, Norbert; Fiore, Gina L; Weder, Christoph

    2015-06-24

    Hydrogen-bonded, side-chain-functionalized supramolecular poly(alkyl methacrylate)s were investigated as light- and temperature-responsive reversible adhesives that are useful for bonding and debonding on demand applications. Here, 2-hydroxyethyl methacrylate (HEMA) was functionalized with 2-ureido-4[1H]pyrimidinone (UPy) via a hexamethylenediisocyanate (HMDI) linker, to create a monomer (UPy-HMDI-HEMA) that serves to form supramolecular cross-links by way of forming quadruple hydrogen bonded dimers. UPy-HMDI-HEMA was copolymerized with either hexyl methacrylate or butyl methacrylate to create copolymers comprising 2.5, 5, or 10 mol % of the cross-linker. The mechanical properties of all (co)polymers were investigated with stress-strain experiments and dynamic mechanical analysis. Furthermore, the adhesive properties were studied at temperatures between 20 and 60 °C by testing single lap joints formed with stainless steel substrates. It was found that increasing the concentration of the UPy-HMDI-HEMA cross-linker leads to improved mechanical and adhesive properties at elevated temperatures. Concurrently, the reversibility of the bond formation remained unaffected, where rebonded samples displayed the same adhesive strength as regularly bonded samples. Debonding on demand abilities were also tested exemplarily for one copolymer, which for light-induced debonding experiments was blended with a UV-absorber that served as light-heat converter. Single lap joints were subjected to a constant force and heated or irradiated with UV light until debonding occurred. The necessary debonding temperature was comparable for direct heating and UV irradiation and varied between 28 and 82 °C, depending on the applied force. The latter also influenced the debonding time, which under the chosen conditions ranged from 30 s to 12 min. PMID:26043809

  16. Protective effect of chitosan oligosaccharide lactate against DNA double-strand breaks induced by a model methacrylate dental adhesive

    PubMed Central

    Szczepanska, Joanna; Pawlowska, Elzbieta; Synowiec, Ewelina; Czarny, Piotr; Rekas, Marek; Blasiak, Janusz; Szaflik, Jacek Pawel

    2011-01-01

    Summary Background Monomers of methacrylates used in restorative dentistry have been recently reported to induce DNA double-strand breaks (DSBs) in human gingival fibroblasts (HGFs) in vitro. Because such monomers may penetrate the pulp and oral cavity due to the incompleteness of polymerization and polymer degradation, they may induce a similar effect in vivo. DSBs are the most serious type of DNA damage and if misrepaired or not repaired may lead to mutation, cancer transformation and cell death. Therefore, the protection against DSBs induced by methacrylate monomers released from dental restorations is imperative. Material/Methods We examined the protective action of chitosan oligosaccharide lactate (ChOL) against cytotoxic and genotoxic effects induced by monomers of the model adhesive consisting of 55% bisphenol A-diglycidyl dimethacrylate (Bis-GMA) and 45% 2-hydroxyethyl methacrylate (HEMA). We evaluated the extent of DSBs by the neutral comet assay and the phosphorylation of the H2AX histone test. Results ChOL increased the viability of HGFs exposed to Bis-GMA/HEMA as assessed by flow cytometry. ChOL decreased the extent of DSBs induced by Bis-GMA/HEMA as evaluated by neutral comet assay and phosphorylation of the H2AX histone. ChOL did not change mechanical properties of the model adhesive, as checked by the shear bond test. Scanning electron microscopy revealed a better sealing of the dentinal microtubules in the presence of ChOL, which may protect pulp cells against the harmful action of the monomers. Conclusions ChOL can be considered as an additive to methacrylate-based dental materials to prevent DSBs induction, but further studies are needed on its formulation with the methacrylates. PMID:21804456

  17. Novel Nanocomposites of Poly(lauryl methacrylate)-Grafted Al2O3 Nanoparticles in LDPE.

    PubMed

    Cobo Sánchez, Carmen; Wåhlander, Martin; Taylor, Nathaniel; Fogelström, Linda; Malmström, Eva

    2015-11-25

    Aluminum oxide nanoparticles (NPs) were surface-modified by poly(lauryl methacrylate) (PLMA) using surface-initiated atom-transfer radical polymerization (SI-ATRP) of lauryl methacrylate. Nanocomposites were obtained by mixing the grafted NPs in a low-density polyethylene (LDPE) matrix in different ratios. First, the NPs were silanized with different aminosilanes, (3-aminopropyl)triethoxysilane, and 3-aminopropyl(diethoxy)methylsilane (APDMS). Subsequently, α-BiB, an initiator for SI-ATRP, was attached to the amino groups, showing higher immobilization ratios for APDMS and confirming that fewer self-condensation reactions between silanes took place. In a third step SI-ATRP of LMA at different times was performed to render PLMA-grafted NPs (NP-PLMAs), showing good control of the polymerization. Reactions were conducted for 20 to 60 min, obtaining a range of molecular weights between 23 000 and 83 000 g/mol, as confirmed by size-exclusion chromoatography of the cleaved grafts. Nanocomposites of NP-PLMAs at low loadings in LDPE were prepared by extrusion. At low loadings, 0.5 wt % of inorganic content, the second yield point, storage, and loss moduli increased significantly, suggesting an improved interphase as an effect of the PLMA grafts. These observations were also confirmed by an increase in transparency of the nanocomposite films. At higher loadings, 1 wt % of inorganics, the increasing amount of PLMA gave rise to the formation of small aggregates, which may explain the loss of mechanical properties. Finally, dielectric measurements were performed, showing a decrease in tan δ values for LDPE-NP-PLMAs, as compared to the nanocomposites containing unmodified NP, thus indicating an improved interphase between the NPs and LDPE.

  18. Characterization of glycidyl methacrylate – Crosslinked hyaluronan hydrogel scaffolds incorporating elastogenic hyaluronan oligomers

    PubMed Central

    Ibrahim, S.; Kothapalli, C.R.; Kang, Q.K.; Ramamurthi, A.

    2013-01-01

    Prior studies on two-dimensional cell cultures suggest that hyaluronic acid (HA) stimulates cell-mediated regeneration of extracellular matrix structures, specifically those containing elastin, though such biologic effects are dependent on HA fragment size. Towards being able to regenerate three-dimensional (3-D) elastic tissue constructs, the present paper studies photo-crosslinked hydrogels containing glycidyl methacrylate (GM)-derivatized bio-inert high molecular weight(HMW)HA (1 × 106 Da) and a bioactive HA oligomer mixture (HA-o: MW ~0.75 kDa). The mechanical (rheology, degradation) and physical (apparent crosslinking density, swelling ratio) properties of the gels varied as a function of incorporated HA oligomer content; however, overall, the mechanics of these hydrogels were too weak for vascular applications as stand-alone materials. Upon in vivo subcutaneous implantation, only a few inflammatory cells were evident around GM–HA gels, however their number increased as HA-o content within the gels increased, and the collagen I distribution was uniform. Smooth muscle cells (SMC) were encapsulated into GM hydrogels, and calcein acetoxymethyl detection revealed that the cells were able to endure twofold the level of UV exposure used to crosslink the gels. After 21 days of culture, SMC elastin production, measured by immunofluorescence quantification, showed HA-o to increase cellular deposition of elastic matrix twofold relative to HA-o-free GM–HAgels. These results demonstrate that cell response to HA/HA-o is not altered by their methacrylation and photo-crosslinking into a hydrogel, and that HA-o incorporation into cell-encapsulating hydrogel scaffolds can be useful for enhancing their production of elastic matrix structures in a 3-D space, important for regenerating elastic tissues. PMID:20709199

  19. Evaluation of three-dimensional biofilms on antibacterial bonding agents containing novel quaternary ammonium methacrylates

    PubMed Central

    Zhou, Han; Weir, Michael D; Antonucci, Joseph M; Schumacher, Gary E; Zhou, Xue-Dong; Xu, Hockin HK

    2014-01-01

    Antibacterial adhesives are promising to inhibit biofilms and secondary caries. The objectives of this study were to synthesize and incorporate quaternary ammonium methacrylates into adhesives, and investigate the alkyl chain length effects on three-dimensional biofilms adherent on adhesives for the first time. Six quaternary ammonium methacrylates with chain lengths of 3, 6, 9, 12, 16 and 18 were synthesized and incorporated into Scotchbond Multi-Purpose. Streptococcus mutans bacteria were cultured on resin to form biofilms. Confocal laser scanning microscopy was used to measure biofilm thickness, live/dead volumes and live-bacteria percentage vs. distance from resin surface. Biofilm thickness was the greatest for Scotchbond control; it decreased with increasing chain length, reaching a minimum at chain length 16. Live-biofilm volume had a similar trend. Dead-biofilm volume increased with increasing chain length. The adhesive with chain length 9 had 37% live bacteria near resin surface, but close to 100% live bacteria in the biofilm top section. For chain length 16, there were nearly 0% live bacteria throughout the three-dimensional biofilm. In conclusion, strong antibacterial activity was achieved by adding quaternary ammonium into adhesive, with biofilm thickness and live-biofilm volume decreasing as chain length was increased from 3 to 16. Antibacterial adhesives typically only inhibited bacteria close to its surface; however, adhesive with chain length 16 had mostly dead bacteria in the entire three-dimensional biofilm. Antibacterial adhesive with chain length 16 is promising to inhibit biofilms at the margins and combat secondary caries. PMID:24722581

  20. Methyl methacrylate levels in orthopedic surgery: comparison of two conventional vacuum mixing systems.

    PubMed

    Jelecevic, Jasmin; Maidanjuk, Stanislaw; Leithner, Andreas; Loewe, Kai; Kuehn, Klaus-Dieter

    2014-05-01

    Poly-methyl methacrylate bone cements contain methyl methacrylate (MMA), which is known for its sensitizing and toxic properties. Therefore, in most European countries and in the USA, guidelines or regulations exist for occupational exposures. The use of vacuum mixing systems can significantly reduce airborne MMA concentrations during bone setting. Our goal was to test two commonly used vacuum mixing systems (Palamix(®) and Optivac(®)) using Palacos(®) R bone cement for their effectiveness at preventing MMA vapor release in a series of standardized trials in a laboratory as well as in an operating theatre. MMA was quantified every second over a period of 3 min using a photoionization detector (MiniRAE(®) 3000) device positioned in the breathing area of the user. Significant differences in MMA mean vapor concentrations over 180 s were observed in the two experimental spaces, with the highest mean concentrations (7.61 and 7.98 ppm for Palamix(®) and Optivac(®), respectively) observed in a laboratory with nine air changes per hour and the lowest average concentrations (1.06 and 1.12 ppm for Palamix(®) and Optivac(®), respectively) in an operating theatre with laminar flow ventilation and 22 air changes per hour. No significant differences in overall MMA concentrations were found between the two vacuum mixing systems in either location. Though, differences were found between both systems during single mixing phases. Thus, typical handling of MMA in orthopedic procedures must be seen as not harmful as concentrations do not reach the short-term exposure limit of 100 ppm. Additionally, laminar airflow seems to have an influence on lowering MMA concentrations in operation theatres.