Science.gov

Sample records for 32-bit floating point

  1. A CMOS floating point multiplier

    NASA Astrophysics Data System (ADS)

    Uya, M.; Kaneko, K.; Yasui, J.

    1984-10-01

    This paper describes a 32-bit CMOS floating point multiplier. The chip can perform 32-bit floating point multiplication (based on the proposed IEEE Standard format) and 24-bit fixed point multiplication (two's complement format) in less than 78.7 and 71.1 ns, respectively, and the typical power dissipation is 195 mW at 10 million operations per second. High-speed multiplication techniques - a modified Booth's allgorithm, a carry save adder scheme, a high-speed CMOS full adder, and a modified carry select adder - are used to achieve the above high performance. The chip is designed for compatibility with 16-bit microcomputer systems, and is fabricated in 2 micron n-well CMOS technology; it contains about 23000 transistors of 5.75 x 5.67 sq mm in size.

  2. FLOPAK: FLOATING POINT PROGRAMING PACKAGE,

    DTIC Science & Technology

    FLOPAK is a Packard-Bell 250 Computer semi-automatic, floating - point programing system which may be operated simultaneously in either of two modes...250 floating - point system available which may be used in real-time control. The system was originally designed to solve a real-time communication problem....The first is a non-time optimized mode which may be used by inex perienced coders; the second mode is a high-speed, fully time-optimized floating

  3. BEST POSSIBLE FLOATING POINT ARITHMETIC.

    DTIC Science & Technology

    The report presents an algorithm for floating point arithmetic, using single-length arithmetic registers, which yields the most accurate...approximation which can be expressed in the given floating point format, the greatest lower bound, or the least upper bound for the result of the operation

  4. Design of a reversible single precision floating point subtractor.

    PubMed

    Anantha Lakshmi, Av; Sudha, Gf

    2014-01-04

    In recent years, Reversible logic has emerged as a major area of research due to its ability to reduce the power dissipation which is the main requirement in the low power digital circuit design. It has wide applications like low power CMOS design, Nano-technology, Digital signal processing, Communication, DNA computing and Optical computing. Floating-point operations are needed very frequently in nearly all computing disciplines, and studies have shown floating-point addition/subtraction to be the most used floating-point operation. However, few designs exist on efficient reversible BCD subtractors but no work on reversible floating point subtractor. In this paper, it is proposed to present an efficient reversible single precision floating-point subtractor. The proposed design requires reversible designs of an 8-bit and a 24-bit comparator unit, an 8-bit and a 24-bit subtractor, and a normalization unit. For normalization, a 24-bit Reversible Leading Zero Detector and a 24-bit reversible shift register is implemented to shift the mantissas. To realize a reversible 1-bit comparator, in this paper, two new 3x3 reversible gates are proposed The proposed reversible 1-bit comparator is better and optimized in terms of the number of reversible gates used, the number of transistor count and the number of garbage outputs. The proposed work is analysed in terms of number of reversible gates, garbage outputs, constant inputs and quantum costs. Using these modules, an efficient design of a reversible single precision floating point subtractor is proposed. Proposed circuits have been simulated using Modelsim and synthesized using Xilinx Virtex5vlx30tff665-3. The total on-chip power consumed by the proposed 32-bit reversible floating point subtractor is 0.410 W.

  5. NULL convention floating point multiplier.

    PubMed

    Albert, Anitha Juliette; Ramachandran, Seshasayanan

    2015-01-01

    Floating point multiplication is a critical part in high dynamic range and computational intensive digital signal processing applications which require high precision and low power. This paper presents the design of an IEEE 754 single precision floating point multiplier using asynchronous NULL convention logic paradigm. Rounding has not been implemented to suit high precision applications. The novelty of the research is that it is the first ever NULL convention logic multiplier, designed to perform floating point multiplication. The proposed multiplier offers substantial decrease in power consumption when compared with its synchronous version. Performance attributes of the NULL convention logic floating point multiplier, obtained from Xilinx simulation and Cadence, are compared with its equivalent synchronous implementation.

  6. NULL Convention Floating Point Multiplier

    PubMed Central

    Ramachandran, Seshasayanan

    2015-01-01

    Floating point multiplication is a critical part in high dynamic range and computational intensive digital signal processing applications which require high precision and low power. This paper presents the design of an IEEE 754 single precision floating point multiplier using asynchronous NULL convention logic paradigm. Rounding has not been implemented to suit high precision applications. The novelty of the research is that it is the first ever NULL convention logic multiplier, designed to perform floating point multiplication. The proposed multiplier offers substantial decrease in power consumption when compared with its synchronous version. Performance attributes of the NULL convention logic floating point multiplier, obtained from Xilinx simulation and Cadence, are compared with its equivalent synchronous implementation. PMID:25879069

  7. Use of delayed addition techniques to accelerate integer and floating-point calculations in configurable hardware

    NASA Astrophysics Data System (ADS)

    Luo, Zhen; Martonosi, Margaret

    1998-10-01

    This paper proposes and evaluates an approach for improving the performance of arithmetic calculations via delayed addition. Our approach employs the idea used in Wallace trees to delay addition until the end of a repeated calculation such as accumulation or dot-product; this effectively removes carry propagation overhead from the calculation's critical path. We present imager and floating- point designs that use this technique. Our pipelined integer multiply-accumulate design is based on a fairly traditional multiplier design, but with delayed addition as well. This design achieves a 37 MHz clock rate on an XC4036XL-2 FPGA. Next, we present a 32-bit floating-point accumulator based on delayed addition. Here delayed addition requires a novel alignment technique that decouples the incoming operands from the accumulated result. A conservative version of this design achieves a 33 MHz clock rate. Finally, we also present a more aggressive 32-bit floating-point accumulator design that achieves a 66 MHz clock rate. These designs demonstrate the utility of delayed addition for accelerating FPGA calculations in both the integer and floating-point domains.

  8. Implementation of neural network hardware based on a floating point operation in an FPGA

    NASA Astrophysics Data System (ADS)

    Kim, Jeong-Seob; Jung, Seul

    2007-12-01

    This paper presents a hardware design and implementation of the radial basis function (RBF) neural network (NN) by the hardware description language. Due to its nonlinear characteristics, it is very difficult to implement for a system with integer-based operation. To develop nonlinear functions such sigmoid functions or exponential functions, floating point operations are required. The exponential function is designed based on the 32bit single-precision floating-point format. In addition, to update weights in the network, the back-propagation algorithm is also implemented in the hardware. Most operations are performed in the floating-point based arithmetic unit and accomplished sequentially by the instruction order stored in ROM. The NN is implemented and tested on the Altera FPGA "Cyclone2 EP2C70F672C8" for nonlinear classifications.

  9. New Directions in Floating-Point Arithmetic

    NASA Astrophysics Data System (ADS)

    Beebe, Nelson H. F.

    2007-12-01

    This article briefly describes the history of floating-point arithmetic, the development and features of IEEE standards for such arithmetic, desirable features of new implementations of floating-point hardware, and discusses work-in-progress aimed at making decimal floating-point arithmetic widely available across many architectures, operating systems, and programming languages.

  10. Floating Point Multiply-Add-Subtract Implementation

    DTIC Science & Technology

    2014-11-07

    implementation receives two floating point numbers Ain and Bin. The floating point number is separated into component parts for processing. For this purpose...in FIG. 2 the mantissa of Ain is identified as Aman, and the mantissa of Bin is identified as Bman. The exponent of Ain is identified as Aexp, and...unit implementation 10 receives Ain and Bin in a floating point format that can be broken up into signs, mantissas, and exponents. These numbers

  11. Towards sensible floating-point arithmetic

    SciTech Connect

    Cody, W.J.

    1980-01-01

    Efforts to promote the development of high-quality transportable numerical software show that few, if any, of the floating-point arithmetic systems in existing computers are completely satisfactory for serious numerical computation. Examination of the defects in these systems leads to specifications for a sensible floating-point system from a numerical analyst's viewpoint. 1 table.

  12. BLOCK-FLOATING-POINT REALIZATION OF DIGITAL FILTERS

    DTIC Science & Technology

    A realization for digital filters using block- floating - point arithmetic is proposed. A statistical model for roundoff noise is presented and used to compare block- floating - point with fixed-point and floating - point realizations.

  13. Floating point arithmetic in future supercomputers

    NASA Technical Reports Server (NTRS)

    Bailey, David H.; Barton, John T.; Simon, Horst D.; Fouts, Martin J.

    1989-01-01

    Considerations in the floating-point design of a supercomputer are discussed. Particular attention is given to word size, hardware support for extended precision, format, and accuracy characteristics. These issues are discussed from the perspective of the Numerical Aerodynamic Simulation Systems Division at NASA Ames. The features believed to be most important for a future supercomputer floating-point design include: (1) a 64-bit IEEE floating-point format with 11 exponent bits, 52 mantissa bits, and one sign bit and (2) hardware support for reasonably fast double-precision arithmetic.

  14. Verification of floating-point software

    NASA Technical Reports Server (NTRS)

    Hoover, Doug N.

    1990-01-01

    Floating point computation presents a number of problems for formal verification. Should one treat the actual details of floating point operations, or accept them as imprecisely defined, or should one ignore round-off error altogether and behave as if floating point operations are perfectly accurate. There is the further problem that a numerical algorithm usually only approximately computes some mathematical function, and we often do not know just how good the approximation is, even in the absence of round-off error. ORA has developed a theory of asymptotic correctness which allows one to verify floating point software with a minimum entanglement in these problems. This theory and its implementation in the Ariel C verification system are described. The theory is illustrated using a simple program which finds a zero of a given function by bisection. This paper is presented in viewgraph form.

  15. Genetic Algorithms, Floating Point Numbers and Applications

    NASA Astrophysics Data System (ADS)

    Hardy, Yorick; Steeb, Willi-Hans; Stoop, Ruedi

    The core in most genetic algorithms is the bitwise manipulations of bit strings. We show that one can directly manipulate the bits in floating point numbers. This means the main bitwise operations in genetic algorithm mutations and crossings are directly done inside the floating point number. Thus the interval under consideration does not need to be known in advance. For applications, we consider the roots of polynomials and finding solutions of linear equations.

  16. Program Converts VAX Floating-Point Data To UNIX

    NASA Technical Reports Server (NTRS)

    Alves, Marcos; Chapman, Bruce; Chu, Eugene

    1996-01-01

    VAX Floating Point to Host Floating Point Conversion (VAXFC) software converts non-ASCII files to unformatted floating-point representation of UNIX machine. This is done by reading bytes bit by bit, converting them to floating-point numbers, then writing results to another file. Useful when data files created by VAX computer must be used on other machines. Written in C language.

  17. Dose Rate and Total Dose Radiation Testing of the Texas Instruments TMS320C30 32-Bit Floating Point Digital Signal Processor.

    DTIC Science & Technology

    1991-08-01

    curies. The radiation exposure rate is determined by the distance of the exposed specimens from the Co-60 source. 4.2 DOSE RATE TESTING We tested the... exposure . The test fixture monitored the internal registers and memory locations of the device while being exposed to subsequently higher dose rates. An...instrument measures the dose rate of the radiation exposure . Calibration of the dosimetry system is accomplished using thermoluminescent dosimeters (TLDs

  18. Improvements in floating point addition/subtraction operations

    DOEpatents

    Farmwald, P.M.

    1984-02-24

    Apparatus is described for decreasing the latency time associated with floating point addition and subtraction in a computer, using a novel bifurcated, pre-normalization/post-normalization approach that distinguishes between differences of floating point exponents.

  19. An integrated circuit floating point accumulator

    NASA Technical Reports Server (NTRS)

    Goldsmith, T. C.

    1977-01-01

    Goddard Space Flight Center has developed a large scale integrated circuit (type 623) which can perform pulse counting, storage, floating point compression, and serial transmission, using a single monolithic device. Counts of 27 or 19 bits can be converted to transmitted values of 12 or 8 bits respectively. Use of the 623 has resulted in substantial savaings in weight, volume, and dollar resources on at least 11 scientific instruments to be flown on 4 NASA spacecraft. The design, construction, and application of the 623 are described.

  20. Rounding in redundant digit floating point system

    NASA Astrophysics Data System (ADS)

    Fahmy, Hossam A. H.; Flynn, Michael J.

    2003-12-01

    Redundant representations are used to increase the performance of arithmetic units. If redundancy is eliminated, the bits needed to represent a number may increase or decrease depending on the type of redundancy used. In such a redundant representation, finding the exact location and correct decision for rounding without eliminating the redundancy or loosing its performance gains is difficult. This paper discusses the different issues related to rounding in redundant systems. It also presents a solution that was used to maintain the gains of redundancy in a floating point unit while correctly implementing the IEEE rounding modes.

  1. A Formalization of Floating Point Numeric Base Conversion

    DTIC Science & Technology

    The process of converting arbitrary real numbers into a floating point format is formalized as a mapping of the reals into a specified subset of real...numbers. The structure of this subset, the set of a significant digit base beta floating point numbers, is analyzed and properties of conversion...implications of these results with regards to establishing goals and standards for floating point formats and conversion procedures are considered.

  2. Trident: An FPGA Compiler Framework for Floating-Point Algorithms.

    SciTech Connect

    Tripp J. L.; Peterson, K. D.; Poznanovic, J. D.; Ahrens, C. M.; Gokhale, M.

    2005-01-01

    Trident is a compiler for floating point algorithms written in C, producing circuits in reconfigurable logic that exploit the parallelism available in the input description. Trident automatically extracts parallelism and pipelines loop bodies using conventional compiler optimizations and scheduling techniques. Trident also provides an open framework for experimentation, analysis, and optimization of floating point algorithms on FPGAs and the flexibility to easily integrate custom floating point libraries.

  3. Environment parameters and basic functions for floating-point computation

    NASA Technical Reports Server (NTRS)

    Brown, W. S.; Feldman, S. I.

    1978-01-01

    A language-independent proposal for environment parameters and basic functions for floating-point computation is presented. Basic functions are proposed to analyze, synthesize, and scale floating-point numbers. The model provides a small set of parameters and a small set of axioms along with sharp measures of roundoff error. The parameters and functions can be used to write portable and robust codes that deal intimately with the floating-point representation. Subject to underflow and overflow constraints, a number can be scaled by a power of the floating-point radix inexpensively and without loss of precision. A specific representation for FORTRAN is included.

  4. ROUND-OFF ERROR OF FLOATING-POINT DIGITAL FILTERS,

    DTIC Science & Technology

    the filter, the problem has been studied extensively. The only result available for floating - point arithmetic realization of digital filters is an...paper, a statistic approach is adopted to treat the round-off error problem for floating - point computer realization of filters. (Author)

  5. Algorithms to Reveal Properties of Floating-Point Arithmetic

    DTIC Science & Technology

    Two algorithms are presented in the form of Fortran subroutines. Each subroutine computes the radix and number of digits of the floating - point numbers...and whether rounding or chopping is done by the machine on which it is run. The methods are shown to work on any ’reasonable’ floating - point computer.

  6. Floating-point arithmetic in embedded and reconfigurable computing systems

    NASA Astrophysics Data System (ADS)

    Gilani, Syed; Schulte, Michael; Compton, Katherine; Hockert, Neil

    2009-08-01

    Modern embedded and reconfigurable systems need to support a wide range of applications, many of which may significantly benefit from hardware support for floating-point arithmetic. Some of these applications include 3D graphics, multiple-input multiple-output (MIMO) wireless communication algorithms, orthogonal frequency division multiplexing (OFDM) based systems, and digital filters. Many of these applications have real-time constraints that cannot tolerate the high latency of software emulated floating-point arithmetic. Moreover, software emulation can lead to higher energy consumption that may be unsuitable for applications in powerconstrained environments. This paper examines applications that can potentially benefit from hardware support for floating-point arithmetic and discusses some approaches taken for floating-point arithmetic in embedded and reconfigurable systems. Precision and range analysis is performed on emerging applications in the MIMO wireless communications domain to investigate the potential for low power floating-point units that utilize reduced precision and exponent range.

  7. A radiation-hardened 16/32-bit microprocessor

    SciTech Connect

    Hass, K.J.; Treece, R.K.; Giddings, A.E.

    1989-01-01

    A radiation-hardened 16/32-bit microprocessor has been fabricated and tested. Our initial evaluation has demonstrated that it is functional after a total gamma dose of 5Mrad(Si) and is immune to SEU from Krypton ions. 3 refs., 2 figs.

  8. 8-, 16-, and 32-Bit Processors: Characteristics and Appropriate Applications.

    ERIC Educational Resources Information Center

    Williams, James G.

    1984-01-01

    Defines and describes the components and functions that constitute a microcomputer--bits, bytes, address register, cycle time, data path, and bus. Characteristics of 8-, 16-, and 32-bit machines are explained in detail, and microprocessor evolution, architecture, and implementation are discussed. Application characteristics or types for each bit…

  9. Pc-Based Floating Point Imaging Workstation

    NASA Astrophysics Data System (ADS)

    Guzak, Chris J.; Pier, Richard M.; Chinn, Patty; Kim, Yongmin

    1989-07-01

    The medical, military, scientific and industrial communities have come to rely on imaging and computer graphics for solutions to many types of problems. Systems based on imaging technology are used to acquire and process images, and analyze and extract data from images that would otherwise be of little use. Images can be transformed and enhanced to reveal detail and meaning that would go undetected without imaging techniques. The success of imaging has increased the demand for faster and less expensive imaging systems and as these systems become available, more and more applications are discovered and more demands are made. From the designer's perspective the challenge to meet these demands forces him to attack the problem of imaging from a different perspective. The computing demands of imaging algorithms must be balanced against the desire for affordability and flexibility. Systems must be flexible and easy to use, ready for current applications but at the same time anticipating new, unthought of uses. Here at the University of Washington Image Processing Systems Lab (IPSL) we are focusing our attention on imaging and graphics systems that implement imaging algorithms for use in an interactive environment. We have developed a PC-based imaging workstation with the goal to provide powerful and flexible, floating point processing capabilities, along with graphics functions in an affordable package suitable for diverse environments and many applications.

  10. Defining the IEEE-854 floating-point standard in PVS

    NASA Technical Reports Server (NTRS)

    Miner, Paul S.

    1995-01-01

    A significant portion of the ANSI/IEEE-854 Standard for Radix-Independent Floating-Point Arithmetic is defined in PVS (Prototype Verification System). Since IEEE-854 is a generalization of the ANSI/IEEE-754 Standard for Binary Floating-Point Arithmetic, the definition of IEEE-854 in PVS also formally defines much of IEEE-754. This collection of PVS theories provides a basis for machine checked verification of floating-point systems. This formal definition illustrates that formal specification techniques are sufficiently advanced that is is reasonable to consider their use in the development of future standards.

  11. Signed-digit online floating-point arithmetic for FPGAs

    NASA Astrophysics Data System (ADS)

    Tangtrakul, Atakorn; Yeung, Benjamin; Cook, Todd A.

    1996-10-01

    Many potential applications for reconfigurable computing need the dynamic range provided by floating-point arithmetic. However, doing floating-point on FPGAs is difficult because of the large amount of hardware required, particularly for multipliers. Some limited success has been obtained through digit-serial implementation of IEEE floating-point multipliers, but the IEEE representation is not easily or efficiently implemented in serial form. Therefore, we have been exploring alternate number representations. Signed-digit representations have shown some promise, since their form lends them to serial computation, which consumes much less hardware than fully parallel approaches. We show how the signed-digit representation can be used to implement floating-point arithmetic, and we present prototype implementations using Altera FPGAs.

  12. Parametric time delay modeling for floating point units

    NASA Astrophysics Data System (ADS)

    Fahmy, Hossam A. H.; Liddicoat, Albert A.; Flynn, Michael J.

    2002-12-01

    A parametric time delay model to compare floating point unit implementations is proposed. This model is used to compare a previously proposed floating point adder using a redundant number representation with other high-performance implementations. The operand width, the fan-in of the logic gates and the radix of the redundant format are used as parameters to the model. The comparison is done over a range of operand widths, fan-in and radices to show the merits of each implementation.

  13. The Unified Floating Point Vector Coprocessor for Reconfigurable Hardware

    NASA Astrophysics Data System (ADS)

    Kathiara, Jainik

    There has been an increased interest recently in using embedded cores on FPGAs. Many of the applications that make use of these cores have floating point operations. Due to the complexity and expense of floating point hardware, these algorithms are usually converted to fixed point operations or implemented using floating-point emulation in software. As the technology advances, more and more homogeneous computational resources and fixed function embedded blocks are added to FPGAs and hence implementation of floating point hardware becomes a feasible option. In this research we have implemented a high performance, autonomous floating point vector Coprocessor (FPVC) that works independently within an embedded processor system. We have presented a unified approach to vector and scalar computation, using a single register file for both scalar operands and vector elements. The Hybrid vector/SIMD computational model of FPVC results in greater overall performance for most applications along with improved peak performance compared to other approaches. By parameterizing vector length and the number of vector lanes, we can design an application specific FPVC and take optimal advantage of the FPGA fabric. For this research we have also initiated designing a software library for various computational kernels, each of which adapts FPVC's configuration and provide maximal performance. The kernels implemented are from the area of linear algebra and include matrix multiplication and QR and Cholesky decomposition. We have demonstrated the operation of FPVC on a Xilinx Virtex 5 using the embedded PowerPC.

  14. Fast computational scheme of image compression for 32-bit microprocessors

    NASA Technical Reports Server (NTRS)

    Kasperovich, Leonid

    1994-01-01

    This paper presents a new computational scheme of image compression based on the discrete cosine transform (DCT), underlying JPEG and MPEG International Standards. The algorithm for the 2-d DCT computation uses integer operations (register shifts and additions / subtractions only); its computational complexity is about 8 additions per image pixel. As a meaningful example of an on-board image compression application we consider the software implementation of the algorithm for the Mars Rover (Marsokhod, in Russian) imaging system being developed as a part of Mars-96 International Space Project. It's shown that fast software solution for 32-bit microprocessors may compete with the DCT-based image compression hardware.

  15. A 32-bit Ultrafast Parallel Correlator using Resonant Tunneling Devices

    NASA Technical Reports Server (NTRS)

    Kulkarni, Shriram; Mazumder, Pinaki; Haddad, George I.

    1995-01-01

    An ultrafast 32-bit pipeline correlator has been implemented using resonant tunneling diodes (RTD) and hetero-junction bipolar transistors (HBT). The negative differential resistance (NDR) characteristics of RTD's is the basis of logic gates with the self-latching property that eliminates pipeline area and delay overheads which limit throughput in conventional technologies. The circuit topology also allows threshold logic functions such as minority/majority to be implemented in a compact manner resulting in reduction of the overall complexity and delay of arbitrary logic circuits. The parallel correlator is an essential component in code division multi-access (CDMA) transceivers used for the continuous calculation of correlation between an incoming data stream and a PN sequence. Simulation results show that a nano-pipelined correlator can provide and effective throughput of one 32-bit correlation every 100 picoseconds, using minimal hardware, with a power dissipation of 1.5 watts. RTD plus HBT based logic gates have been fabricated and the RTD plus HBT based correlator is compared with state of the art complementary metal oxide semiconductor (CMOS) implementations.

  16. Optimal Compression of Floating-Point FITS Images

    NASA Astrophysics Data System (ADS)

    Pence, W. D.; White, R. L.; Seaman, R.

    2010-12-01

    Lossless compression (e.g., with GZIP) of floating-point format astronomical FITS images is ineffective and typically only reduces the file size by 10% to 30%. We describe a much more effective compression method that is supported by the publicly available fpack and funpack FITS image compression utilities that can compress floating point images by a factor of 10 without loss of significant scientific precision. A “subtractive dithering” technique is described which permits coarser quantization (and thus higher compression) than is possible with simple scaling methods.

  17. Floating-point Bugs in Embedded GNU C Library

    DTIC Science & Technology

    2013-11-19

    Floating-point Bugs in Embedded GNU C Library Soonho Kong Sicun Gao Edmund M. Clarke November 19, 2013 CMU-CS-13-130 School of Computer Science...Embedded GNU C Library. For instance, the sine function can return values larger than 1053 in certain rounding modes. Further investigation also...REPORT DATE 19 NOV 2013 2. REPORT TYPE 3. DATES COVERED 00-00-2013 to 00-00-2013 4. TITLE AND SUBTITLE Floating-point Bugs in Embedded GNU C

  18. Floating point representations in quantum circuit synthesis

    NASA Astrophysics Data System (ADS)

    Wiebe, Nathan; Kliuchnikov, Vadym

    2013-09-01

    We provide a non-deterministic quantum protocol that approximates the single qubit rotations Rx(2ϕ21ϕ22) using Rx(2ϕ1) and Rx(2ϕ2) and a constant number of Clifford and T operations. We then use this method to construct a ‘floating point’ implementation of a small rotation wherein we use the aforementioned method to construct the exponent part of the rotation and also to combine it with a mantissa. This causes the cost of the synthesis to depend more strongly on the relative (rather than absolute) precision required. We analyze the mean and variance of the T-count required to use our techniques and provide new lower bounds for the T-count for ancilla free synthesis of small single-qubit axial rotations. We further show that our techniques can use ancillas to beat these lower bounds with high probability. We also discuss the T-depth of our method and see that the vast majority of the cost of the resultant circuits can be shifted to parallel computation paths.

  19. Applying n-bit floating point numbers and integers, and the n-bit filter of HDF5 to reduce file sizes of remote sensing products in memory-sensitive environments

    NASA Astrophysics Data System (ADS)

    Zinke, Stephan

    2017-02-01

    Memory sensitive applications for remote sensing data require memory-optimized data types in remote sensing products. Hierarchical Data Format version 5 (HDF5) offers user defined floating point numbers and integers and the n-bit filter to create data types optimized for memory consumption. The European Organisation for the Exploitation of Meteorological Satellites (EUMETSAT) applies a compaction scheme to the disseminated products of the Day and Night Band (DNB) data of Suomi National Polar-orbiting Partnership (S-NPP) satellite's instrument Visible Infrared Imager Radiometer Suite (VIIRS) through the EUMETSAT Advanced Retransmission Service, converting the original 32 bits floating point numbers to user defined floating point numbers in combination with the n-bit filter for the radiance dataset of the product. The radiance dataset requires a floating point representation due to the high dynamic range of the DNB. A compression factor of 1.96 is reached by using an automatically determined exponent size and an 8 bits trailing significand and thus reducing the bandwidth requirements for dissemination. It is shown how the parameters needed for user defined floating point numbers are derived or determined automatically based on the data present in a product.

  20. Instabilities caused by floating-point arithmetic quantization.

    NASA Technical Reports Server (NTRS)

    Phillips, C. L.

    1972-01-01

    It is shown that an otherwise stable digital control system can be made unstable by signal quantization when the controller operates on floating-point arithmetic. Sufficient conditions of instability are determined, and an example of loss of stability is treated when only one quantizer is operated.

  1. Floating-point system quantization errors in digital control systems

    NASA Technical Reports Server (NTRS)

    Phillips, C. L.; Vallely, D. P.

    1978-01-01

    This paper considers digital controllers (filters) operating in floating-point arithmetic in either open-loop or closed-loop systems. A quantization error analysis technique is developed, and is implemented by a digital computer program that is based on a digital simulation of the system. The program can be integrated into existing digital simulations of a system.

  2. Bifurcated method and apparatus for floating point addition with decreased latency time

    DOEpatents

    Farmwald, Paul M.

    1987-01-01

    Apparatus for decreasing the latency time associated with floating point addition and subtraction in a computer, using a novel bifurcated, pre-normalization/post-normalization approach that distinguishes between differences of floating point exponents.

  3. Fast and efficient compression of floating-point data.

    PubMed

    Lindstrom, Peter; Isenburg, Martin

    2006-01-01

    Large scale scientific simulation codes typically run on a cluster of CPUs that write/read time steps to/from a single file system. As data sets are constantly growing in size, this increasingly leads to I/O bottlenecks. When the rate at which data is produced exceeds the available I/O bandwidth, the simulation stalls and the CPUs are idle. Data compression can alleviate this problem by using some CPU cycles to reduce the amount of data needed to be transfered. Most compression schemes, however, are designed to operate offline and seek to maximize compression, not throughput. Furthermore, they often require quantizing floating-point values onto a uniform integer grid, which disqualifies their use in applications where exact values must be retained. We propose a simple scheme for lossless, online compression of floating-point data that transparently integrates into the I/O of many applications. A plug-in scheme for data-dependent prediction makes our scheme applicable to a wide variety of data used in visualization, such as unstructured meshes, point sets, images, and voxel grids. We achieve state-of-the-art compression rates and speeds, the latter in part due to an improved entropy coder. We demonstrate that this significantly accelerates I/O throughput in real simulation runs. Unlike previous schemes, our method also adapts well to variable-precision floating-point and integer data.

  4. High-speed floating-point divider with reduced area

    NASA Astrophysics Data System (ADS)

    Han, Kyung-Nam; Tenca, Alexandre F.; Tran, David

    2009-08-01

    This paper presents a new implementation of a floating-point divider unit with a competitive performance and reduced area based on proposed modifications to the recursive equations of Goldschmidt algorithm. The Goldschmidt algorithm takes advantage of parallelism in the Newton-Raphson method with the same quadratic convergence. However, recursive equations in the Goldschmidt algorithm consist of a series of multiplications with full-precision operands, and it suffers from large area consumption. In this paper, the recursive equations in the algorithm are modified to replace full-precision multipliers with smaller multipliers and squarers. Implementations of floating-point reciprocal and divider using the modification are presented. Synthesis result shows around 20% to 40% area reduction when it is compared to the implementation based on the conventional Goldschmidt algorithm.

  5. A Scheme for Compressing Floating-Point Images

    NASA Astrophysics Data System (ADS)

    White, Richard L.; Greenfield, Perry

    While many techniques have been used to compress integer data, compressing floating-point data presents a number of additional problems. We have implemented a scheme for compressing floating-point images that is fast, robust, and automatic, that allows random access to pixels without decompressing the whole image, and that generally has a scientifically negligible effect on the noise present in the image. The compressed data are stored in an FITS binary table. Most astronomical images can be compressed by approximately a factor of 3, using conservative settings for the permitted level of changes in the data. We intend to work with NOAO to incorporate this compression method into the IRAF image kernel, so that FITS images compressed using this scheme can be accessed transparently from IRAF applications without any explicit decompression steps. The scheme is simple, and it should be possible to include it in other FITS libraries as well.

  6. CMOS floating-point vector-arithmetic unit

    NASA Astrophysics Data System (ADS)

    Timmermann, D.; Rix, B.; Hahn, H.; Hosticka, B. J.

    1994-05-01

    This work describes a floating-point arithmetic unit based on the CORDIC algorithm. The unit computes a full set of high level arithmetic and elementary functions: multiplication, division, (co)sine, hyperbolic (co)sine, square root, natural logarithm, inverse (hyperbolic) tangent, vector norm, and phase. The chip has been integrated in 1.6 micron double-metal n-well CMOS technology and achieves a normalized peak performance of 220 MFLOPS.

  7. A floating-point library for integer processors

    NASA Astrophysics Data System (ADS)

    Bertin, Christian; Brisebarre, Nicolas; Dupont de Dinechin, Benoit; Jeannerod, Claude-Pierre; Monat, Christophe; Muller, Jean-Michel; Raina, Saurabh-Kumar; Tisserand, Arnaud

    2004-10-01

    This paper presents a C library for the software support of single precision floating-point (FP) arithmetic on processors without FP hardware units such as VLIW or DSP processor cores for embedded applications. This library provides several levels of compliance to the IEEE 754 FP standard. The complete specifications of the standard can be used or just some relaxed characteristics such as restricted rounding modes or computations without denormal numbers. This library is evaluated on the ST200 VLIW processors from STMicroelectronics.

  8. Instrumentation for diode laser spectroscopy using 32-bit microcontrollers and a Nexus 7 Android tablet

    NASA Astrophysics Data System (ADS)

    Eyler, Edward

    2013-05-01

    Last year, I described a low-cost ramp and timing generator using a 32-bit microcontroller, connected via USB to an Android tablet that provides a bidirectional touch-screen interface. I have since developed several additional designs to support experiments involving diode laser spectroscopy and cold atom manipulation. One circuit card can be used either as a high-resolution temperature controller or as a dual high-voltage driver for PZT positioners. A second provides a flexible user interface to commercial laser current driver modules, with support for floating ground connections. A third supports a pair of inexpensive rf frequency synthesizer chips (ADF4351) that are usable from 35-4000 MHz. A fast rf switch provides numerous options, including phase-coherent frequency shifting at MHz rates for high-bandwidth laser stabilization and studies of polychromatic optical forces. Additional circuits for laser frequency locking are under development. All of these devices are controllable from a Google Nexus 7 tablet, which is inexpensive yet has graphics processing speeds that allow seamless real-time updates of charts and oscilloscope-like displays. Supported in part by the National Science Foundation.

  9. On the Floating Point Performance of the i860 Microprocessor

    NASA Technical Reports Server (NTRS)

    Lee, King; Kutler, Paul (Technical Monitor)

    1997-01-01

    The i860 microprocessor is a pipelined processor that can deliver two double precision floating point results every clock. It is being used in the Touchstone project to develop a teraflop computer by the year 2000. With such high computational capabilities it was expected that memory bandwidth would limit performance on many kernels. Measured performance of three kernels showed performance is less than what memory bandwidth limitations would predict. This paper develops a model that explains the discrepancy in terms of memory latencies and points to some problems involved in moving data from memory to the arithmetic pipelines.

  10. Multi-input and binary reproducible, high bandwidth floating point adder in a collective network

    SciTech Connect

    Chen, Dong; Eisley, Noel A.; Heidelberger, Philip; Steinmacher-Burow, Burkhard

    2016-11-15

    To add floating point numbers in a parallel computing system, a collective logic device receives the floating point numbers from computing nodes. The collective logic devices converts the floating point numbers to integer numbers. The collective logic device adds the integer numbers and generating a summation of the integer numbers. The collective logic device converts the summation to a floating point number. The collective logic device performs the receiving, the converting the floating point numbers, the adding, the generating and the converting the summation in one pass. One pass indicates that the computing nodes send inputs only once to the collective logic device and receive outputs only once from the collective logic device.

  11. Multi-input and binary reproducible, high bandwidth floating point adder in a collective network

    DOEpatents

    Chen, Dong; Eisley, Noel A; Heidelberger, Philip; Steinmacher-Burow, Burkhard

    2015-03-10

    To add floating point numbers in a parallel computing system, a collective logic device receives the floating point numbers from computing nodes. The collective logic devices converts the floating point numbers to integer numbers. The collective logic device adds the integer numbers and generating a summation of the integer numbers. The collective logic device converts the summation to a floating point number. The collective logic device performs the receiving, the converting the floating point numbers, the adding, the generating and the converting the summation in one pass. One pass indicates that the computing nodes send inputs only once to the collective logic device and receive outputs only once from the collective logic device.

  12. Fixed-Rate Compressed Floating-Point Arrays.

    PubMed

    Lindstrom, Peter

    2014-12-01

    Current compression schemes for floating-point data commonly take fixed-precision values and compress them to a variable-length bit stream, complicating memory management and random access. We present a fixed-rate, near-lossless compression scheme that maps small blocks of 4(d) values in d dimensions to a fixed, user-specified number of bits per block, thereby allowing read and write random access to compressed floating-point data at block granularity. Our approach is inspired by fixed-rate texture compression methods widely adopted in graphics hardware, but has been tailored to the high dynamic range and precision demands of scientific applications. Our compressor is based on a new, lifted, orthogonal block transform and embedded coding, allowing each per-block bit stream to be truncated at any point if desired, thus facilitating bit rate selection using a single compression scheme. To avoid compression or decompression upon every data access, we employ a software write-back cache of uncompressed blocks. Our compressor has been designed with computational simplicity and speed in mind to allow for the possibility of a hardware implementation, and uses only a small number of fixed-point arithmetic operations per compressed value. We demonstrate the viability and benefits of lossy compression in several applications, including visualization, quantitative data analysis, and numerical simulation.

  13. Verification methods: Rigorous results using floating-point arithmetic

    NASA Astrophysics Data System (ADS)

    Rump, Siegfried M.

    A classical mathematical proof is constructed using pencil and paper. However, there are many ways in which computers may be used in a mathematical proof. But `proof by computer', or even the use of computers in the course of a proof, is not so readily accepted (the December 2008 issue of the Notices of the American Mathematical Society is devoted to formal proofs by computer).In the following we introduce verification methods and discuss how they can assist in achieving a mathematically rigorous result. In particular we emphasize how floating-point arithmetic is used.

  14. A floating-point/multiple-precision processor for airborne applications

    NASA Technical Reports Server (NTRS)

    Yee, R.

    1982-01-01

    A compact input output (I/O) numerical processor capable of performing floating-point, multiple precision and other arithmetic functions at execution times which are at least 100 times faster than comparable software emulation is described. The I/O device is a microcomputer system containing a 16 bit microprocessor, a numerical coprocessor with eight 80 bit registers running at a 5 MHz clock rate, 18K random access memory (RAM) and 16K electrically programmable read only memory (EPROM). The processor acts as an intelligent slave to the host computer and can be programmed in high order languages such as FORTRAN and PL/M-86.

  15. Y-MP floating point and Cholesky factorization

    NASA Technical Reports Server (NTRS)

    Carter, Russell

    1991-01-01

    The floating point arithmetics implemented in the Cray 2 and Cray Y-MP computer systems are nearly identical, but large scale computations performed on the two systems have exhibited significant differences in accuracy. The difference in accuracy is analyzed for Cholesky factorization algorithm, and it is found that the source of the difference is the subtract magnitude operation of the Cray Y-MP. The results from numerical experiments for a range of problem sizes are presented, and an efficient method for improving the accuracy of the factorization obtained on the Y-MP is presented.

  16. Floating-point function generation routines for 16-bit microcomputers

    NASA Technical Reports Server (NTRS)

    Mackin, M. A.; Soeder, J. F.

    1984-01-01

    Several computer subroutines have been developed that interpolate three types of nonanalytic functions: univariate, bivariate, and map. The routines use data in floating-point form. However, because they are written for use on a 16-bit Intel 8086 system with an 8087 mathematical coprocessor, they execute as fast as routines using data in scaled integer form. Although all of the routines are written in assembly language, they have been implemented in a modular fashion so as to facilitate their use with high-level languages.

  17. Optimal Compression Methods for Floating-point Format Images

    NASA Technical Reports Server (NTRS)

    Pence, W. D.; White, R. L.; Seaman, R.

    2009-01-01

    We report on the results of a comparison study of different techniques for compressing FITS images that have floating-point (real*4) pixel values. Standard file compression methods like GZIP are generally ineffective in this case (with compression ratios only in the range 1.2 - 1.6), so instead we use a technique of converting the floating-point values into quantized scaled integers which are compressed using the Rice algorithm. The compressed data stream is stored in FITS format using the tiled-image compression convention. This is technically a lossy compression method, since the pixel values are not exactly reproduced, however all the significant photometric and astrometric information content of the image can be preserved while still achieving file compression ratios in the range of 4 to 8. We also show that introducing dithering, or randomization, when assigning the quantized pixel-values can significantly improve the photometric and astrometric precision in the stellar images in the compressed file without adding additional noise. We quantify our results by comparing the stellar magnitudes and positions as measured in the original uncompressed image to those derived from the same image after applying successively greater amounts of compression.

  18. ISA extensions for high-radix online floating-point addition

    NASA Astrophysics Data System (ADS)

    Dormiani, Pouya; Ercegovac, Miloš D.; Colavin, O.

    2007-09-01

    ISA extensions for DLX type architectures are proposed to perform high radix online floating point addition on fixed point units with extended feature sets. Online arithmetic allows most significant digit first computation of results, allowing overlapped execution of dependent operations and offers greater instruction scheduling opportunities than software implementations of conventional floating point addition. In this paper we seek an ISA formulation to find a middle ground between full hardware floating point addition units and software implementations strictly based on available ALU logic.

  19. A floating-point digital receiver for MRI.

    PubMed

    Hoenninger, John C; Crooks, Lawrence E; Arakawa, Mitsuaki

    2002-07-01

    A magnetic resonance imaging (MRI) system requires the highest possible signal fidelity and stability for clinical applications. Quadrature analog receivers have problems with channel matching, dc offset and analog-to-digital linearity. Fixed-point digital receivers (DRs) reduce all of these problems. We have demonstrated that a floating-point DR using large (order 124 to 512) FIR low-pass filters also overcomes these problems, automatically provides long word length and has low latency between signals. A preloaded table of finite impuls response (FIR) filter coefficients provides fast switching between one of 129 different one-stage and two-stage multrate FIR low-pass filters with bandwidths between 4 KHz and 125 KHz. This design has been implemented on a dual channel circuit board for a commercial MRI system.

  20. A Machine-Independent ALGOL Procedure for Accurate Floating-Point Summation

    DTIC Science & Technology

    The paper describes all ALGOL 60 procedure which is an implementation of the floating - point summation technique described in Malcolm (1971). This...implementation is machine-independent in the sense that it will work on nay computer having a floating - point number system F characterized as follows...number 0 is contained in F , but no assumption is made about its representation. All floating - point operations (e.g., addition and multiplication) are

  1. Floating point only SIMD instruction set architecture including compare, select, Boolean, and alignment operations

    DOEpatents

    Gschwind, Michael K.

    2011-03-01

    Mechanisms for implementing a floating point only single instruction multiple data instruction set architecture are provided. A processor is provided that comprises an issue unit, an execution unit coupled to the issue unit, and a vector register file coupled to the execution unit. The execution unit has logic that implements a floating point (FP) only single instruction multiple data (SIMD) instruction set architecture (ISA). The floating point vector registers of the vector register file store both scalar and floating point values as vectors having a plurality of vector elements. The processor may be part of a data processing system.

  2. Paranoia.Ada: A diagnostic program to evaluate Ada floating-point arithmetic

    NASA Technical Reports Server (NTRS)

    Hjermstad, Chris

    1986-01-01

    Many essential software functions in the mission critical computer resource application domain depend on floating point arithmetic. Numerically intensive functions associated with the Space Station project, such as emphemeris generation or the implementation of Kalman filters, are likely to employ the floating point facilities of Ada. Paranoia.Ada appears to be a valuabe program to insure that Ada environments and their underlying hardware exhibit the precision and correctness required to satisfy mission computational requirements. As a diagnostic tool, Paranoia.Ada reveals many essential characteristics of an Ada floating point implementation. Equipped with such knowledge, programmers need not tremble before the complex task of floating point computation.

  3. Floating-point system quantization errors in digital control systems

    NASA Technical Reports Server (NTRS)

    Phillips, C. L.

    1973-01-01

    The results are reported of research into the effects on system operation of signal quantization in a digital control system. The investigation considered digital controllers (filters) operating in floating-point arithmetic in either open-loop or closed-loop systems. An error analysis technique is developed, and is implemented by a digital computer program that is based on a digital simulation of the system. As an output the program gives the programing form required for minimum system quantization errors (either maximum of rms errors), and the maximum and rms errors that appear in the system output for a given bit configuration. The program can be integrated into existing digital simulations of a system.

  4. Error bounds on complex floating-point multiplication

    NASA Astrophysics Data System (ADS)

    Brent, Richard; Percival, Colin; Zimmermann, Paul

    2007-09-01

    Given floating-point arithmetic with t -digit base- beta significands in which all arithmetic operations are performed as if calculated to infinite precision and rounded to a nearest representable value, we prove that the product of complex values z_0 and z_1 can be computed with maximum absolute error \\vert z_0Vert z_1\\vert frac{1}{2} beta^{1 - t} sqrt{5} . In particular, this provides relative error bounds of 2^{-24} sqrt{5} and 2^{-53} sqrt{5} for IEEE 754 single and double precision arithmetic respectively, provided that overflow, underflow, and denormals do not occur. We also provide the numerical worst cases for IEEE 754 single and double precision arithmetic.

  5. Fixed-rate compressed floating-point arrays

    SciTech Connect

    Lindstrom, P.

    2014-03-30

    ZFP is a library for lossy compression of single- and double-precision floating-point data. One of the unique features of ZFP is its support for fixed-rate compression, which enables random read and write access at the granularity of small blocks of values. Using a C++ interface, this allows declaring compressed arrays (1D, 2D, and 3D arrays are supported) that through operator overloading can be treated just like conventional, uncompressed arrays, but which allow the user to specify the exact number of bits to allocate to the array. ZFP also has variable-rate fixed-precision and fixed-accuracy modes, which allow the user to specify a tolerance on the relative or absolute error.

  6. NIP. A FLOATING-POINT INTERPRETIVE PROGRAMMING SYSTEM FOR THE NAREC COMPUTER.

    DTIC Science & Technology

    system, known as NIP (acronym for NAREC Interpretive Programming system), provides for automatic floating - point computation over the range between 10...language. A brief description of the floating - point system, an example of a program written in extended precision, and a table of instruction execution times are included in the appendixes. (Author)

  7. Lossless coding of floating point data with JPEG 2000 Part 10

    NASA Astrophysics Data System (ADS)

    Gamito, Manuel N.; Salles Dias, Miguel

    2004-11-01

    JPEG 2000 Part 10 is a new work part of the ISO/IEC JPEG Committee dealing with the extension of JPEG 2000 technologies to three-dimensional data. One of the issues in Part 10 is the ability to encode floating point datasets. Many Part 10 use cases come from the scientific and engineering communities, where floating point data is often produced either from numerical simulations or from remote sensing instruments. This paper presents the technologies that are currently being developed to accommodate this Part 10 requirement. The coding of floating point datasets with JPEG 2000 requires two changes to the coding pipeline. Firstly, the wavelet transformation stage is optimized to correctly decorrelate data represented with the IEEE 754 floating point standard. Special IEEE 754 floating point values like Infinities and NaN's are signaled beforehand as they do not correlate well with other floating point values. Secondly, computation of distortion measures on the encoder side is performed in floating point space, rather than in integer space, in order to correctly perform rate allocation. Results will show that these enhancements to the JPEG 2000 coding pipeline lead to better compression results than Part 1 encoding where the floating point data had been retyped as integers.

  8. On Round-Off Error of Floating-Point Addition with Guard Digits,

    DTIC Science & Technology

    Some recent computers, such as those in the IBM 360 series, use radix 16 and single precision with guard digit in floating - point addition. In this...paper, a bound on the round-off error for floating - point addition in single precision with guard digits is derived. Comparison with double precision addition is made. (Author)

  9. Exploiting Parallelism in Geometry Processing with General Purpose Processors and Floating-Point SIMD Instructions

    DTIC Science & Technology

    2005-01-01

    a 4-issue dynamically scheduled processor that can issue at most 2 floating - point operations. In comparison, an 8-issue processor, ignoring cycle time...then doubling only the floating - point issue width of a 4-issue processor with SIMD instructions gives the best performance among the architectural

  10. Test plan for 32-bit microcomputers for the Water Resources Division; Chapter A, Test plan for acquisition of prototype 32-bit microcomputers

    USGS Publications Warehouse

    Hutchison, N.E.; Harbaugh, A.W.; Holloway, R.A.; Merk, C.F.

    1987-01-01

    The Water Resources Division (WRD) of the U.S. Geological Survey is evaluating 32-bit microcomputers to determine how they can complement, and perhaps later replace, the existing network of minicomputers. The WRD is also designing a National Water Information System (NWIS) that will combine and integrate the existing National Water Data Storage and Retrieval System (WATSTORE), National Water Data Exchange (NAWDEX), and components of several other existing systems. The procedures and testing done in a market evaluation of 32-bit microcomputers are documented. The results of the testing are documented in the NWIS Project Office. The market evaluation was done to identify commercially available hardware and software that could be used for implementing early NWIS prototypes to determine the applicability of 32-bit microcomputers for data base and general computing applications. Three microcomputers will be used for these prototype studies. The results of the prototype studies will be used to compile requirements for a Request for Procurement (RFP) for hardware and software to meet the WRD 's needs in the early 1990's. The identification of qualified vendors to provide the prototype hardware and software included reviewing industry literature, and making telephone calls and personal visits to prospective vendors. Those vendors that appeared to meet general requirements were required to run benchmark tests. (Author 's abstract)

  11. A hardware error estimate for floating-point computations

    NASA Astrophysics Data System (ADS)

    Lang, Tomás; Bruguera, Javier D.

    2008-08-01

    We propose a hardware-computed estimate of the roundoff error in floating-point computations. The estimate is computed concurrently with the execution of the program and gives an estimation of the accuracy of the result. The intention is to have a qualitative indication when the accuracy of the result is low. We aim for a simple implementation and a negligible effect on the execution of the program. Large errors due to roundoff occur in some computations, producing inaccurate results. However, usually these large errors occur only for some values of the data, so that the result is accurate in most executions. As a consequence, the computation of an estimate of the error during execution would allow the use of algorithms that produce accurate results most of the time. In contrast, if an error estimate is not available, the solution is to perform an error analysis. However, this analysis is complex or impossible in some cases, and it produces a worst-case error bound. The proposed approach is to keep with each value an estimate of its error, which is computed when the value is produced. This error is the sum of a propagated error, due to the errors of the operands, plus the generated error due to roundoff during the operation. Since roundoff errors are signed values (when rounding to nearest is used), the computation of the error allows for compensation when errors are of different sign. However, since the error estimate is of finite precision, it suffers from similar accuracy problems as any floating-point computation. Moreover, it is not an error bound. Ideally, the estimate should be large when the error is large and small when the error is small. Since this cannot be achieved always with an inexact estimate, we aim at assuring the first property always, and the second most of the time. As a minimum, we aim to produce a qualitative indication of the error. To indicate the accuracy of the value, the most appropriate type of error is the relative error. However

  12. The complexity of class polynomial computation via floating point approximations

    NASA Astrophysics Data System (ADS)

    Enge, Andreas

    2009-06-01

    We analyse the complexity of computing class polynomials, that are an important ingredient for CM constructions of elliptic curves, via complex floating point approximations of their roots. The heart of the algorithm is the evaluation of modular functions in several arguments. The fastest one of the presented approaches uses a technique devised by Dupont to evaluate modular functions by Newton iterations on an expression involving the arithmetic-geometric mean. Under the heuristic assumption, justified by experiments, that the correctness of the result is not perturbed by rounding errors, the algorithm runs in time O left( sqrt {\\vert D\\vert} log^3 \\vert D\\vert M left( sq... ...arepsilon} \\vert D\\vert right) subseteq O left( h^{2 + \\varepsilon} right) for any \\varepsilon > 0 , where D is the CM discriminant, h is the degree of the class polynomial and M (n) is the time needed to multiply two n -bit numbers. Up to logarithmic factors, this running time matches the size of the constructed polynomials. The estimate also relies on a new result concerning the complexity of enumerating the class group of an imaginary quadratic order and on a rigorously proven upper bound for the height of class polynomials.

  13. Precise accounting of bit errors in floating-point computations

    NASA Astrophysics Data System (ADS)

    Schmalz, Mark S.

    2009-08-01

    Floating-point computation generates errors at the bit level through four processes, namely, overflow, underflow, truncation, and rounding. Overflow and underflow can be detected electronically, and represent systematic errors that are not of interest in this study. Truncation occurs during shifting toward the least-significant bit (herein called right-shifting), and rounding error occurs at the least significant bit. Such errors are not easy to track precisely using published means. Statistical error propagation theory typically yields conservative estimates that are grossly inadequate for deep computational cascades. Forward error analysis theory developed for image and signal processing or matrix operations can yield a more realistic typical case, but the error of the estimate tends to be high in relationship to the estimated error. In this paper, we discuss emerging technology for forward error analysis, which allows an algorithm designer to precisely estimate the output error of a given operation within a computational cascade, under a prespecified set of constraints on input error and computational precision. This technique, called bit accounting, precisely tracks the number of rounding and truncation errors in each bit position of interest to the algorithm designer. Because all errors associated with specific bit positions are tracked, and because integer addition only is involved in error estimation, the error of the estimate is zero. The technique of bit accounting is evaluated for its utility in image and signal processing. Complexity analysis emphasizes the relationship between the work and space estimates of the algorithm being analyzed, and its error estimation algorithm. Because of the significant overhead involved in error representation, it is shown that bit accounting is less useful for real-time error estimation, but is well suited to analysis in support of algorithm design.

  14. Floating-point performance of ARM cores and their efficiency in classical molecular dynamics

    NASA Astrophysics Data System (ADS)

    Nikolskiy, V.; Stegailov, V.

    2016-02-01

    Supercomputing of the exascale era is going to be inevitably limited by power efficiency. Nowadays different possible variants of CPU architectures are considered. Recently the development of ARM processors has come to the point when their floating point performance can be seriously considered for a range of scientific applications. In this work we present the analysis of the floating point performance of the latest ARM cores and their efficiency for the algorithms of classical molecular dynamics.

  15. Of What Use Is Floating-Point Arithmetic in Computational Geometry?

    NASA Astrophysics Data System (ADS)

    Funke, Stefan

    We give a sketchy and informal overview of the use of floating-point arithmetic in the implementation of geometric algorithms. First we point out the pitfalls of a too naive use of floating-point arithmetic and then talk about less naive ways which do not compromise the sensibility of the outcome. Accidentally, Kurt Mehlhorn and his collaborators had a finger in the pie all the time.

  16. FPGA-based floating-point datapath design for geometry processing

    NASA Astrophysics Data System (ADS)

    Xing, Shanzhen; Yu, William W.

    1998-10-01

    Geometry processing comprises of a great many computationally intensive floating-point operations. Real- time graphics systems generally use application-specific custom designed parallel hardware to provide the high performance computation power. When designing a graphics engine on a FPGA-based configurable computing system, cost- effectiveness is important. This paper investigates and proposes a cost-effective FPGA-based floating-point datapath for geometry process. It is designed to be a basic building block for FPGA-based geometry processors. The implemented datapath operates at a frequency of 6.25 Mhz and has an average floating-point operation time of 10.2 microseconds.

  17. Lightweight Floating-Point Arithmetic: Case Study of Inverse Discrete Cosine Transform

    NASA Astrophysics Data System (ADS)

    Fang, Fang; Chen, Tsuhan; Rutenbar, Rob A.

    2002-12-01

    To enable floating-point (FP) signal processing applications in low-power mobile devices, we propose lightweight floating-point arithmetic. It offers a wider range of precision/power/speed/area trade-offs, but is wrapped in forms that hide the complexity of the underlying implementations from both multimedia software designers and hardware designers. Libraries implemented in C++ and Verilog provide flexible and robust floating-point units with variable bit-width formats, multiple rounding modes and other features. This solution bridges the design gap between software and hardware, and accelerates the design cycle from algorithm to chip by avoiding the translation to fixed-point arithmetic. We demonstrate the effectiveness of the proposed scheme using the inverse discrete cosine transform (IDCT), in the context of video coding, as an example. Further, we implement lightweight floating-point IDCT into hardware and demonstrate the power and area reduction.

  18. Selection of floating-point or fixed-point for adaptive noise canceller in somatosensory evoked potential measurement.

    PubMed

    Shen, Chongfei; Liu, Hongtao; Xie, Xb; Luk, Keith Dk; Hu, Yong

    2007-01-01

    Adaptive noise canceller (ANC) has been used to improve signal to noise ratio (SNR) of somsatosensory evoked potential (SEP). In order to efficiently apply the ANC in hardware system, fixed-point algorithm based ANC can achieve fast, cost-efficient construction, and low-power consumption in FPGA design. However, it is still questionable whether the SNR improvement performance by fixed-point algorithm is as good as that by floating-point algorithm. This study is to compare the outputs of ANC by floating-point and fixed-point algorithm ANC when it was applied to SEP signals. The selection of step-size parameter (micro) was found different in fixed-point algorithm from floating-point algorithm. In this simulation study, the outputs of fixed-point ANC showed higher distortion from real SEP signals than that of floating-point ANC. However, the difference would be decreased with increasing micro value. In the optimal selection of micro, fixed-point ANC can get as good results as floating-point algorithm.

  19. Implementation of 14 bits floating point numbers of calculating units for neural network hardware development

    NASA Astrophysics Data System (ADS)

    Zoev, I. V.; Beresnev, A. P.; Mytsko, E. A.; Malchukov, A. N.

    2017-02-01

    An important aspect of modern automation is machine learning. Specifically, neural networks are used for environment analysis and decision making based on available data. This article covers the most frequently performed operations on floating-point numbers in artificial neural networks. Also, a selection of the optimum value of the bit to 14-bit floating-point numbers for implementation on FPGAs was submitted based on the modern architecture of integrated circuits. The description of the floating-point multiplication (multiplier) algorithm was presented. In addition, features of the addition (adder) and subtraction (subtractor) operations were described in the article. Furthermore, operations for such variety of neural networks as a convolution network - mathematical comparison of a floating point (‘less than’ and ‘greater than or equal’) were presented. In conclusion, the comparison with calculating units of Atlera was made.

  20. Optimization of block-floating-point realizations for digital controllers with finite-word-length considerations.

    PubMed

    Wu, Jun; Hu, Xie-he; Chen, Sheng; Chu, Jian

    2003-01-01

    The closed-loop stability issue of finite-precision realizations was investigated for digital controllers implemented in block-floating-point format. The controller coefficient perturbation was analyzed resulting from using finite word length (FWL) block-floating-point representation scheme. A block-floating-point FWL closed-loop stability measure was derived which considers both the dynamic range and precision. To facilitate the design of optimal finite-precision controller realizations, a computationally tractable block-floating-point FWL closed-loop stability measure was then introduced and the method of computing the value of this measure for a given controller realization was developed. The optimal controller realization is defined as the solution that maximizes the corresponding measure, and a numerical optimization approach was adopted to solve the resulting optimal realization problem. A numerical example was used to illustrate the design procedure and to compare the optimal controller realization with the initial realization.

  1. Single-chip pulse programmer for magnetic resonance imaging using a 32-bit microcontroller.

    PubMed

    Handa, Shinya; Domalain, Thierry; Kose, Katsumi

    2007-08-01

    A magnetic resonance imaging (MRI) pulse programmer has been developed using a single-chip microcontroller (ADmicroC7026). The microcontroller includes all the components required for the MRI pulse programmer: a 32-bit RISC CPU core, 62 kbytes of flash memory, 8 kbytes of SRAM, two 32-bit timers, four 12-bit DA converters, and 40 bits of general purpose I/O. An evaluation board for the microcontroller was connected to a host personal computer (PC), an MRI transceiver, and a gradient driver using interface circuitry. Target (embedded) and host PC programs were developed to enable MRI pulse sequence generation by the microcontroller. The pulse programmer achieved a (nominal) time resolution of approximately 100 ns and a minimum time delay between successive events of approximately 9 micros. Imaging experiments using the pulse programmer demonstrated the effectiveness of our approach.

  2. Heavy-Ion Testing of the Freescale Qorivva 32-bit Automotive-Grade MCU

    NASA Technical Reports Server (NTRS)

    Wilcox, Ted; Seidleck, Christina; Casey, Megan; LaBel, Ken

    2016-01-01

    We present single-event effects testing results from a commercially-available automotive microcontroller. We discuss the difficulties encountered testing with commercially-provided evaluation boards while attempting to classify the complex and varied failure modes of a modern 32-bit microcontroller. This work also describes some of the possible advantages to using off-the-shelf automotive-grade electronics for low-risk aerospace applications.

  3. Implementation of Fast-ICA: A Performance Based Comparison Between Floating Point and Fixed Point DSP Platform

    NASA Astrophysics Data System (ADS)

    Patil, Dinesh; Das, Niva; Routray, Aurobinda

    2011-01-01

    The main focus of the paper is to bring out the differences in performance related issues of Fast-ICA algorithm associated with floating point and fixed point digital signal processing (DSP) platforms. The DSP platforms consisting of TMS320C6713 floating point processor and TMS320C6416 fixed point processor from Texas Instruments have been chosen for this purpose. To study the consistency of performance, the algorithm has been subjected to three different test cases comprising of a mixture of synthetic signals, a mixture of speech signals and a mixture of synthetic signals in presence of noise, respectively. The performance of the Fast-ICA algorithm on floating point and fixed point platform are compared on the basis of accuracy of separation and execution time. Experimental results show insignificant differences in the accuracy of separation and execution time obtained from fixed point processor when compared with those obtained from floating point processor. This clearly strengthens the feasibility issue concerning hardware realization of Fast-ICA on fixed point platform for specific applications.

  4. An efficient floating-point to fixed-point conversion process for biometric algorithm on DaVinci DSP architecture

    NASA Astrophysics Data System (ADS)

    Konvalinka, Ira; Quddus, Azhar; Asraf, Daniel

    2009-05-01

    Today there is no direct path for the conversion of a floating-point algorithm implementation to an optimized fixed-point implementation. This paper proposes a novel and efficient methodology for Floating-point to Fixed-point Conversion (FFC) of biometric Fingerprint Algorithm Library (FAL) on fixed-point DaVinci processor. A general FFC research task is streamlined along smaller tasks which can be accomplished with lower effort and higher certainty. Formally specified in this paper is the optimization target in FFC, to preserve floating-point accuracy and to reduce execution time, while preserving the majority of algorithm code base. A comprehensive eight point strategy is formulated to achieve that target. Both local (focused on the most time consuming routines) and global optimization flow (to optimize across multiple routines) are used. Characteristic phases in the FFC activity are presented using data from employing the proposed FFC methodology to FAL, starting with target optimization specification, to speed optimization breakthroughs, finalized with validation of FAL accuracy after the execution time optimization. FAL implementation resulted in biometric verification time reduction for over a factor of 5, with negligible impact on accuracy. Any algorithm developer facing the task of implementing his floating-point algorithm on DaVinci DSP is expected to benefit from this presentation.

  5. A Flexible VHDL Floating Point Module for Control Algorithm Implementation in Space Applications

    NASA Astrophysics Data System (ADS)

    Padierna, A.; Nicoleau, C.; Sanchez, J.; Hidalgo, I.; Elvira, S.

    2012-08-01

    The implementation of control loops for space applications is an area with great potential. However, the characteristics of this kind of systems, such as its wide dynamic range of numeric values, make inadequate the use of fixed-point algorithms.However, because the generic chips available for the treatment of floating point data are, in general, not qualified to operate in space environments and the possibility of using an IP module in a FPGA/ASIC qualified for space is not viable due to the low amount of logic cells available for these type of devices, it is necessary to find a viable alternative.For these reasons, in this paper a VHDL Floating Point Module is presented. This proposal allows the design and execution of floating point algorithms with acceptable occupancy to be implemented in FPGAs/ASICs qualified for space environments.

  6. Interval Slopes as a Numerical Abstract Domain for Floating-Point Variables

    NASA Astrophysics Data System (ADS)

    Chapoutot, Alexandre

    The design of embedded control systems is mainly done with model-based tools such as Matlab/Simulink. Numerical simulation is the central technique of development and verification of such tools. Floating-point arithmetic, which is well-known to only provide approximated results, is omnipresent in this activity. In order to validate the behaviors of numerical simulations using abstract interpretation-based static analysis, we present, theoretically and with experiments, a new partially relational abstract domain dedicated to floating-point variables. It comes from interval expansion of non-linear functions using slopes and it is able to mimic all the behaviors of the floating-point arithmetic. Hence it is adapted to prove the absence of run-time errors or to analyze the numerical precision of embedded control systems.

  7. On the design of a radix-10 online floating-point multiplier

    NASA Astrophysics Data System (ADS)

    McIlhenny, Robert D.; Ercegovac, Milos D.

    2009-08-01

    This paper describes an approach to design and implement a radix-10 online floating-point multiplier. An online approach is considered because it offers computational flexibility not available with conventional arithmetic. The design was coded in VHDL and compiled, synthesized, and mapped onto a Virtex 5 FPGA to measure cost in terms of LUTs (look-up-tables) as well as the cycle time and total latency. The routing delay which was not optimized is the major component in the cycle time. For a rough estimate of the cost/latency characteristics, our design was compared to a standard radix-2 floating-point multiplier of equivalent precision. The results demonstrate that even an unoptimized radix-10 online design is an attractive implementation alternative for FPGA floating-point multiplication.

  8. Generating and executing programs for a floating point single instruction multiple data instruction set architecture

    DOEpatents

    Gschwind, Michael K

    2013-04-16

    Mechanisms for generating and executing programs for a floating point (FP) only single instruction multiple data (SIMD) instruction set architecture (ISA) are provided. A computer program product comprising a computer recordable medium having a computer readable program recorded thereon is provided. The computer readable program, when executed on a computing device, causes the computing device to receive one or more instructions and execute the one or more instructions using logic in an execution unit of the computing device. The logic implements a floating point (FP) only single instruction multiple data (SIMD) instruction set architecture (ISA), based on data stored in a vector register file of the computing device. The vector register file is configured to store both scalar and floating point values as vectors having a plurality of vector elements.

  9. Floating-Point Units and Algorithms for field-programmable gate arrays

    SciTech Connect

    Underwood, Keith D.; Hemmert, K. Scott

    2005-11-01

    The software that we are attempting to copyright is a package of floating-point unit descriptions and example algorithm implementations using those units for use in FPGAs. The floating point units are best-in-class implementations of add, multiply, divide, and square root floating-point operations. The algorithm implementations are sample (not highly flexible) implementations of FFT, matrix multiply, matrix vector multiply, and dot product. Together, one could think of the collection as an implementation of parts of the BLAS library or something similar to the FFTW packages (without the flexibility) for FPGAs. Results from this work has been published multiple times and we are working on a publication to discuss the techniques we use to implement the floating-point units, For some more background, FPGAS are programmable hardware. "Programs" for this hardware are typically created using a hardware description language (examples include Verilog, VHDL, and JHDL). Our floating-point unit descriptions are written in JHDL, which allows them to include placement constraints that make them highly optimized relative to some other implementations of floating-point units. Many vendors (Nallatech from the UK, SRC Computers in the US) have similar implementations, but our implementations seem to be somewhat higher performance. Our algorithm implementations are written in VHDL and models of the floating-point units are provided in VHDL as well. FPGA "programs" make multiple "calls" (hardware instantiations) to libraries of intellectual property (IP), such as the floating-point unit library described here. These programs are then compiled using a tool called a synthesizer (such as a tool from Synplicity, Inc.). The compiled file is a netlist of gates and flip-flops. This netlist is then mapped to a particular type of FPGA by a mapper and then a place- and-route tool. These tools assign the gates in the netlist to specific locations on the specific type of FPGA chip used and

  10. A High-Level Formalization of Floating-Point Number in PVS

    NASA Technical Reports Server (NTRS)

    Boldo, Sylvie; Munoz, Cesar

    2006-01-01

    We develop a formalization of floating-point numbers in PVS based on a well-known formalization in Coq. We first describe the definitions of all the needed notions, e.g., floating-point number, format, rounding modes, etc.; then, we present an application to polynomial evaluation for elementary function evaluation. The application already existed in Coq, but our formalization shows a clear improvement in the quality of the result due to the automation provided by PVS. We finally integrate our formalization into a PVS hardware-level formalization of the IEEE-854 standard previously developed at NASA.

  11. Performance of FORTRAN floating-point operations on the Flex/32 multicomputer

    NASA Technical Reports Server (NTRS)

    Crockett, Thomas W.

    1987-01-01

    A series of experiments has been run to examine the floating-point performance of FORTRAN programs on the Flex/32 (Trademark) computer. The experiments are described, and the timing results are presented. The time required to execute a floating-point operation is found to vary considerbaly depending on a number of factors. One factor of particular interest from an algorithm design standpoint is the difference in speed between common memory accesses and local memory accesses. Common memory accesses were found to be slower, and guidelines are given for determinig when it may be cost effective to copy data from common to local memory.

  12. A hardware-oriented algorithm for floating-point function generation

    NASA Technical Reports Server (NTRS)

    O'Grady, E. Pearse; Young, Baek-Kyu

    1991-01-01

    An algorithm is presented for performing accurate, high-speed, floating-point function generation for univariate functions defined at arbitrary breakpoints. Rapid identification of the breakpoint interval, which includes the input argument, is shown to be the key operation in the algorithm. A hardware implementation which makes extensive use of read/write memories is used to illustrate the algorithm.

  13. Software Aspects of IEEE Floating-Point Computations for Numerical Applications in High Energy Physics

    ScienceCinema

    None

    2016-07-12

    Floating-point computations are at the heart of much of the computing done in high energy physics. The correctness, speed and accuracy of these computations are of paramount importance. The lack of any of these characteristics can mean the difference between new, exciting physics and an embarrassing correction. This talk will examine practical aspects of IEEE 754-2008 floating-point arithmetic as encountered in HEP applications. After describing the basic features of IEEE floating-point arithmetic, the presentation will cover: common hardware implementations (SSE, x87) techniques for improving the accuracy of summation, multiplication and data interchange compiler options for gcc and icc affecting floating-point operations hazards to be avoided About the speaker Jeffrey M Arnold is a Senior Software Engineer in the Intel Compiler and Languages group at Intel Corporation. He has been part of the Digital->Compaq->Intel compiler organization for nearly 20 years; part of that time, he worked on both low- and high-level math libraries. Prior to that, he was in the VMS Engineering organization at Digital Equipment Corporation. In the late 1980s, Jeff spent 2½ years at CERN as part of the CERN/Digital Joint Project. In 2008, he returned to CERN to spent 10 weeks working with CERN/openlab. Since that time, he has returned to CERN multiple times to teach at openlab workshops and consult with various LHC experiments. Jeff received his Ph.D. in physics from Case Western Reserve University.

  14. RANS Simulation of the Heave Response of a Two-Body Floating Point Wave Absorber: Preprint

    SciTech Connect

    Yu, Y.; Li, Y.

    2011-03-01

    A preliminary study on a two-body floating wave absorbers is presented in this paper. A Reynolds-Averaged Navier-Stokes computational method is applied for analyzing the hydrodynamic heave response of the absorber in operational wave conditions. The two-body floating wave absorber contains a float section and a submerged reaction section. For validation purposes, our model is first assumed to be locked. The two sections are forced to move together with each other. The locked single body model is used in a heave decay test, where the RANS result is validated with the experimental measurement. For the two-body floating point absorber simulation, the two sections are connected through a mass-spring-damper system, which is applied to simulate the power take-off mechanism under design wave conditions. Overall, the details of the flow around the absorber and its nonlinear interaction with waves are investigated, and the power absorption efficiency of the two-body floating wave absorber in waves with a constant value spring-damper system is examined.

  15. A device to improve the SNR of the measurement of the positional floating reference point

    NASA Astrophysics Data System (ADS)

    Jiang, Jingying; Rong, Xuzheng; Zhang, Hao; Xu, Kexin

    2013-02-01

    Previous studies have preliminarily validated the floating reference method and shown that it has the potential to improve the accuracy of non-invasive blood glucose sensing by Near-Infrared Spectroscopy. In order to make this method practical, it is necessary to precisely verify and measure the existence and variation features of the positional floating reference point. In this talk, a device which can precisely verify and measure the positional floating reference point is built. Since the light intensity of diffuse reflectance from the tested sample is very weak, a multipath detecting fibers system was built to improve signal-to-noise ratio. In this system, the fibers encircle the light source fiber which is regarded as the reference center of detecting fibers while they are moving. In addition, the position of each fiber is accurately controlled by manual translation stage to keep all detecting fibers always in the same radius around light source fiber. This ensures that received signal is coming from the same radial distance of light source. The variation of signal-to-noise ratio along with the different radial distance was investigated based on experiments. Results show that the application of this device could improve signal-to-noise ratio, and provide a new experimental method for the further study of positional floating reference point.

  16. An Efficient Implementation of the Sign LMS Algorithm Using Block Floating Point Format

    NASA Astrophysics Data System (ADS)

    Chakraborty, Mrityunjoy; Shaik, Rafiahamed; Lee, Moon Ho

    2007-12-01

    An efficient scheme is presented for implementing the sign LMS algorithm in block floating point format, which permits processing of data over a wide dynamic range at a processor complexity and cost as low as that of a fixed point processor. The proposed scheme adopts appropriate formats for representing the filter coefficients and the data. It also employs a scaled representation for the step-size that has a time-varying mantissa and also a time-varying exponent. Using these and an upper bound on the step-size mantissa, update relations for the filter weight mantissas and exponent are developed, taking care so that neither overflow occurs, nor are quantities which are already very small multiplied directly. Separate update relations are also worked out for the step size mantissa. The proposed scheme employs mostly fixed-point-based operations, and thus achieves considerable speedup over its floating-point-based counterpart.

  17. Multi-agent CAMAC crate controller with Trident 32-bit transputers

    SciTech Connect

    Inaba, Susumu ); Saeki, Takayuki; Ueda, Ikuo; Anraku, Kazuaki; Imori, Masatosi . Faculty of Science); Saito, Masaki; Ogawa, Seiji )

    1994-08-01

    A CAMAC Crate Controller is developed where three T425-25S 32-bit transputers are installed. The Crate Controller (CC) conforms to the specifications of the EUR 6500e CAMAC standard. It can be used as a stand-alone CC and also as an Auxiliary Crate Controller (ACC). The transputers on the CC are enabled to execute CAMAC dataway operations independently under the supervision of an Arbitration Logic. Each transputer is provided with an independent register set. Owing to the transputer, the CC's can be easily networked through the connection of serial links. The CC's in the network make accesses to front-end CAMAC modules in the individual crates in parallel, communicating with each other. Data are read from front-end CAMAC modules, stored into large memory, processed and then submitted to the network concurrently and autonomously.

  18. Instrumentation for laser physics and spectroscopy using 32-bit microcontrollers with an Android tablet interface

    NASA Astrophysics Data System (ADS)

    Eyler, E. E.

    2013-10-01

    Several high-performance lab instruments suitable for manual assembly have been developed using low-pin-count 32-bit microcontrollers that communicate with an Android tablet via a USB interface. A single Android tablet app accommodates multiple interface needs by uploading parameter lists and graphical data from the microcontrollers, which are themselves programmed with easily modified C code. The hardware design of the instruments emphasizes low chip counts and is highly modular, relying on small "daughter boards" for special functions such as USB power management, waveform generation, and phase-sensitive signal detection. In one example, a daughter board provides a complete waveform generator and direct digital synthesizer that fits on a 1.5 in. × 0.8 in. circuit card.

  19. Lossy compression of floating point high-dynamic range images using JPEG2000

    NASA Astrophysics Data System (ADS)

    Springer, Dominic; Kaup, Andre

    2009-01-01

    In recent years, a new technique called High Dynamic Range (HDR) has gained attention in the image processing field. By representing pixel values with floating point numbers, recorded images can hold significantly more luminance information than ordinary integer images. This paper focuses on the realization of a lossy compression scheme for HDR images. The JPEG2000 standard is used as a basic component and is efficiently integrated into the compression chain. Based on a detailed analysis of the floating point format and the human visual system, a concept for lossy compression is worked out and thoroughly optimized. Our scheme outperforms all other existing lossy HDR compression schemes and shows superior performance both at low and high bitrates.

  20. An analysis of the double-precision floating-point FFT on FPGAs.

    SciTech Connect

    Hemmert, K. Scott; Underwood, Keith Douglas

    2005-01-01

    Advances in FPGA technology have led to dramatic improvements in double precision floating-point performance. Modern FPGAs boast several GigaFLOPs of raw computing power. Unfortunately, this computing power is distributed across 30 floating-point units with over 10 cycles of latency each. The user must find two orders of magnitude more parallelism than is typically exploited in a single microprocessor; thus, it is not clear that the computational power of FPGAs can be exploited across a wide range of algorithms. This paper explores three implementation alternatives for the fast Fourier transform (FFT) on FPGAs. The algorithms are compared in terms of sustained performance and memory requirements for various FFT sizes and FPGA sizes. The results indicate that FPGAs are competitive with microprocessors in terms of performance and that the 'correct' FFT implementation varies based on the size of the transform and the size of the FPGA.

  1. Constrained Chebyshev approximations to some elementary functions suitable for evaluation with floating point arithmetic

    NASA Technical Reports Server (NTRS)

    Manos, P.; Turner, L. R.

    1972-01-01

    Approximations which can be evaluated with precision using floating-point arithmetic are presented. The particular set of approximations thus far developed are for the function TAN and the functions of USASI FORTRAN excepting SQRT and EXPONENTIATION. These approximations are, furthermore, specialized to particular forms which are especially suited to a computer with a small memory, in that all of the approximations can share one general purpose subroutine for the evaluation of a polynomial in the square of the working argument.

  2. Term Cancellations in Computing Floating-Point Gröbner Bases

    NASA Astrophysics Data System (ADS)

    Sasaki, Tateaki; Kako, Fujio

    We discuss the term cancellation which makes the floating-point Gröbner basis computation unstable, and show that error accumulation is never negligible in our previous method. Then, we present a new method, which removes accumulated errors as far as possible by reducing matrices constructed from coefficient vectors by the Gaussian elimination. The method manifests amounts of term cancellations caused by the existence of approximate linearly dependent relations among input polynomials.

  3. Achieving subword parallelism by software reuse of the floating-point data path

    NASA Astrophysics Data System (ADS)

    Zucker, Daniel F.; Lee, Ruby B.; Flynn, Michael J.

    1997-01-01

    Many increasingly important applications, such as video compression, graphics, or other multimedia applications, require only 8 or 16 bit data words. Using the full 64 bit data path available in most computers to perform these low- precision calculations is an inefficient use of resources. Many manufacturers have addressed this problem by introducing new instructions that allow the packing of subword quantities into a full data word. This paper presents a new software-only technique that accomplishes this same objective by packing subword integer quantities into a double precision floating point word. This technique works even in machines that have not been specially modified with new multimedia instructions. While the idea of packing subword integer quantities into a larger integer data word has been proposed before, this technique is unique in packing integer subwords into a single floating point word with a shared exponent. The traditional floating point arithmetic operations of add, subtract, and multiply are used to pack and unpack the subword quantities. Therefore, the algorithm will work on any machine that supports the IEEE double precision floating point arithmetic standard with no machine-specific code required. Furthermore, the methodology can be implemented in a high-level language such as C. In this paper we describe this technique in general and then demonstrate its validity by implementing it in a public domain mpeg decoder application, mpeg_play distributed by the Berkeley Plateau Multimedia Research Group. We achieved an average speed-up of 13.8%. While there is some degradation in quality because calculations are carried out with lower precision, there is no noticeable difference in image appearance. A quantitative comparison of the image quality is presented.

  4. Architecture and Design for a Laser Programmable Double Precision Floating Point Application Specific Processor

    DTIC Science & Technology

    1988-12-01

    4-18 4.13. ALU Carry - Select Adder ........ ............................... 4-20 4.14. Literal Inserter Circuitry...one clock cycle required a carry - select adder . SPICE simulations of the carry - select adder in the ALU showed that this operation could be done in 12...floating point subtraction. The interface to the adder is identical to that of the multiplier. The adder will use a carry - select adder to perform the

  5. Interpretation of IEEE-854 floating-point standard and definition in the HOL system

    NASA Technical Reports Server (NTRS)

    Carreno, Victor A.

    1995-01-01

    The ANSI/IEEE Standard 854-1987 for floating-point arithmetic is interpreted by converting the lexical descriptions in the standard into mathematical conditional descriptions organized in tables. The standard is represented in higher-order logic within the framework of the HOL (Higher Order Logic) system. The paper is divided in two parts with the first part the interpretation and the second part the description in HOL.

  6. Image data compression using a new floating-point digital signal processor.

    PubMed

    Siegel, E L; Templeton, A W; Hensley, K L; McFadden, M A; Baxter, K G; Murphey, M D; Cronin, P E; Gesell, R G; Dwyer, S J

    1991-08-01

    A new dual-ported, floating-point, digital signal processor has been evaluated for compressing 512 and 1,024 digital radiographic images using a full-frame, two-dimensional, discrete cosine transform (2D-DCT). The floating point digital signal processor operates at 49.5 million floating point instructions per second (MFLOPS). The level of compression can be changed by varying four parameters in the lossy compression algorithm. Throughput times were measured for both 2D-DCT compression and decompression. For a 1,024 x 1,024 x 10-bit image with a compression ratio of 316:1, the throughput was 75.73 seconds (compression plus decompression throughput). For a digital fluorography 1,024 x 1,024 x 8-bit image and a compression ratio of 26:1, the total throughput time was 63.23 seconds. For a computed tomography image of 512 x 512 x 12 bits and a compression ratio of 10:1 the throughput time was 19.65 seconds.

  7. Highly accelerated simulations of glassy dynamics using GPUs: Caveats on limited floating-point precision

    NASA Astrophysics Data System (ADS)

    Colberg, Peter H.; Höfling, Felix

    2011-05-01

    Modern graphics processing units (GPUs) provide impressive computing resources, which can be accessed conveniently through the CUDA programming interface. We describe how GPUs can be used to considerably speed up molecular dynamics (MD) simulations for system sizes ranging up to about 1 million particles. Particular emphasis is put on the numerical long-time stability in terms of energy and momentum conservation, and caveats on limited floating-point precision are issued. Strict energy conservation over 10 8 MD steps is obtained by double-single emulation of the floating-point arithmetic in accuracy-critical parts of the algorithm. For the slow dynamics of a supercooled binary Lennard-Jones mixture, we demonstrate that the use of single-floating point precision may result in quantitatively and even physically wrong results. For simulations of a Lennard-Jones fluid, the described implementation shows speedup factors of up to 80 compared to a serial implementation for the CPU, and a single GPU was found to compare with a parallelised MD simulation using 64 distributed cores.

  8. Real-time 2D floating-point fast Fourier transforms for seeker simulation

    NASA Astrophysics Data System (ADS)

    Chamberlain, Richard; Lord, Eric; Shand, David J.

    2002-07-01

    The floating point Fast Fourier Transform (FFT) is one of the most useful basic functions available to the image and signal processing engineer allowing many complex and detailed special functions to be implemented more simply in the frequency domain. In the Hardware-in-the-Loop field an image transformed using FFT would allow the designer to think about accurate frequency based simulation of seeker lens effects, motion blur, detector transfer functions and much more. Unfortunately, the transform requires many hundreds of thousands or millions of floating point operations on a single modest sized image making it impractical for realtime Hardware-in-the-Loop systems. .until now. This paper outlines the development, by Nallatech, of an FPGA based IEEE floating point core. It traces the subsequent use of this core to develop a full 256 X 256 FFT and filter process implemented on COTS hardware at frame rates up to 150Hz. This transform can be demonstrated to model optical transfer functions at a far greater accuracy than the current spatial models. Other applications and extensions of this technique will be discussed such as filtering for image tracking algorithms and in the simulation of radar processing in the frequency domain.

  9. An Adaptive Prediction-Based Approach to Lossless Compression of Floating-Point Volume Data.

    PubMed

    Fout, N; Ma, Kwan-Liu

    2012-12-01

    In this work, we address the problem of lossless compression of scientific and medical floating-point volume data. We propose two prediction-based compression methods that share a common framework, which consists of a switched prediction scheme wherein the best predictor out of a preset group of linear predictors is selected. Such a scheme is able to adapt to different datasets as well as to varying statistics within the data. The first method, called APE (Adaptive Polynomial Encoder), uses a family of structured interpolating polynomials for prediction, while the second method, which we refer to as ACE (Adaptive Combined Encoder), combines predictors from previous work with the polynomial predictors to yield a more flexible, powerful encoder that is able to effectively decorrelate a wide range of data. In addition, in order to facilitate efficient visualization of compressed data, our scheme provides an option to partition floating-point values in such a way as to provide a progressive representation. We compare our two compressors to existing state-of-the-art lossless floating-point compressors for scientific data, with our data suite including both computer simulations and observational measurements. The results demonstrate that our polynomial predictor, APE, is comparable to previous approaches in terms of speed but achieves better compression rates on average. ACE, our combined predictor, while somewhat slower, is able to achieve the best compression rate on all datasets, with significantly better rates on most of the datasets.

  10. Experimental Investigation of the Power Generation Performance of Floating-Point Absorber Wave Energy Systems: Preprint

    SciTech Connect

    Li, Y.; Yu, Y.; Epler, J.; Previsic, M.

    2012-04-01

    The extraction of energy from ocean waves has gained interest in recent years. The floating-point absorber (FPA) is one of the most promising devices among a wide variety of wave energy conversion technologies. Early theoretical studies mainly focused on understanding the hydrodynamics of the system and on predicting the maximum power that could be extracted by a heaving body. These studies evolve from the investigation of floating-body interactions in offshore engineering and naval architecture disciplines. To our best knowledge, no systematic study has been reported about the investigation of the power generation performance of an FPA with a close-to-commercial design. A series of experimental tests was conducted to investigate the power extraction performance of an FPA system.

  11. Floating-point geometry: toward guaranteed geometric computations with approximate arithmetics

    NASA Astrophysics Data System (ADS)

    Bajard, Jean-Claude; Langlois, Philippe; Michelucci, Dominique; Morin, Géraldine; Revol, Nathalie

    2008-08-01

    Geometric computations can fail because of inconsistencies due to floating-point inaccuracy. For instance, the computed intersection point between two curves does not lie on the curves: it is unavoidable when the intersection point coordinates are non rational, and thus not representable using floating-point arithmetic. A popular heuristic approach tests equalities and nullities up to a tolerance ɛ. But transitivity of equality is lost: we can have A approx B and B approx C, but A not approx C (where A approx B means ||A - B|| < ɛ for A,B two floating-point values). Interval arithmetic is another, self-validated, alternative; the difficulty is to limit the swell of the width of intervals with computations. Unfortunately interval arithmetic cannot decide equality nor nullity, even in cases where it is decidable by other means. A new approach, developed in this paper, consists in modifying the geometric problems and algorithms, to account for the undecidability of the equality test and unavoidable inaccuracy. In particular, all curves come with a non-zero thickness, so two curves (generically) cut in a region with non-zero area, an inner and outer representation of which is computable. This last approach no more assumes that an equality or nullity test is available. The question which arises is: which geometric problems can still be solved with this last approach, and which cannot? This paper begins with the description of some cases where every known arithmetic fails in practice. Then, for each arithmetic, some properties of the problems they can solve are given. We end this work by proposing the bases of a new approach which aims to fulfill the geometric computations requirements.

  12. Powerful low-cost laser lab instrumentation using 32-bit microcontrollers and an Android tablet interface

    NASA Astrophysics Data System (ADS)

    Eyler, Edward

    2012-06-01

    Recently, our laboratory has developed several homemade instruments based on 16-bit microcontrollers.ootnotetextE.E. Eyler, Rev. Sci. Instrum. 82, 013105 (2011). Since then, powerful 32-bit microcontrollers have become available, often including host-mode USB interfaces. Concurrently, Android-based tablets with high-resolution graphical displays have become commonplace. With appropriate programming, some tablets can communicate via USB, allowing them to serve as bidirectional touch-screen interfaces. I will describe ramp and timing sequence generators with resolution up to 12.5 ns that can be constructed with very little cost or effort, by making minor additions to commercial development boards. With these instruments, a graphical tablet interface is used mainly for parameter entry, but it is even more useful as a data display for applications such as laser frequency locking or signal monitoring. To minimize programming for the Android devices, my approach is to develop just a few general-purpose ``apps'' that can operate a wide range of instruments. When the USB interface is connected, the microcontroller informs the tablet of its display requirements. This arrangement can eliminate the need for dedicated computers, custom data entry units, or oscilloscopes.

  13. Floating-point scaling technique for sources separation automatic gain control

    NASA Astrophysics Data System (ADS)

    Fermas, A.; Belouchrani, A.; Ait-Mohamed, O.

    2012-07-01

    Based on the floating-point representation and taking advantage of scaling factor indetermination in blind source separation (BSS) processing, we propose a scaling technique applied to the separation matrix, to avoid the saturation or the weakness in the recovered source signals. This technique performs an automatic gain control in an on-line BSS environment. We demonstrate the effectiveness of this technique by using the implementation of a division-free BSS algorithm with two inputs, two outputs. The proposed technique is computationally cheaper and efficient for a hardware implementation compared to the Euclidean normalisation.

  14. Evaluation of floating-point sum or difference of products in carry-save domain

    NASA Technical Reports Server (NTRS)

    Wahab, A.; Erdogan, S.; Premkumar, A. B.

    1992-01-01

    An architecture to evaluate a 24-bit floating-point sum or difference of products using modified sequential carry-save multipliers with extensive pipelining is described. The basic building block of the architecture is a carry-save multiplier with built-in mantissa alignment for the summation during the multiplication cycles. A carry-save adder, capable of mantissa alignment, correctly positions products with the current carry-save sum. Carry propagation in individual multipliers is avoided and is only required once to produce the final result.

  15. Fixed-point vs. floating-point arithmetic comparison for adaptive optics real-time control computation

    NASA Astrophysics Data System (ADS)

    Martín-Hernando, Yolanda; Rodríguez-Ramos, Luis F.; Garcia-Talavera, Marcos R.

    2008-07-01

    Most computers in the past have been equipped with floating point processing capabilities, allowing an easy and brute-force solution for the machine computation errors, not requiring any specific tailoring of the computation in nearly hundred percent of situations. However, the computation needed for the adaptive optics real-time control in 30-50 meter telescopes is big enough to cause trouble to conventional von-Neumann processors, even if Moore's Law is valid for the next years. Field Programmable Gate Array (FPGAs) have been proposed as a viable alternative to cope with such computation needs[1,2], but--at least today's chips--will require fixed-point arithmetic to be used instead. It is then important to evaluate up to what point the accuracy and stability of the control system will be affected by this limitation. This paper presents the simulation and laboratory results of the comparison between both arithmetics, specifically evaluated in an adaptive optics system. The real-time controller has been modeled as black box having as input the wavefront sensor camera digital output data, providing a digital output to the actuators of the deformable mirror, and with the task of internally computing all outputs from the inputs. MATLAB fixed-point library has been used to evaluate the effect of different precision lengths (5-10 fractional bits) in the computation of the Shack-Hartmann subaperture centroid, in comparison with the reference 64-bit floating-point arithmetic and with the noise floor of the real system, concluding that the effect of the limited precision can be overcome by adequately selecting the number of fractional bits used in the representation, and tailoring that number with the needs at every step of the algorithm.

  16. Lithium-ion drifting: Application to the study of point defects in floating-zone silicon

    NASA Technical Reports Server (NTRS)

    Walton, J. T.; Wong, Y. K.; Zulehner, W.

    1997-01-01

    The use of lithium-ion (Li(+)) drifting to study the properties of point defects in p-type Floating-Zone (FZ) silicon crystals is reported. The Li(+) drift technique is used to detect the presence of vacancy-related defects (D defects) in certain p-type FZ silicon crystals. SUPREM-IV modeling suggests that the silicon point defect diffusivities are considerably higher than those commonly accepted, but are in reasonable agreement with values recently proposed. These results demonstrate the utility of Li(+) drifting in the study of silicon point defect properties in p-type FZ crystals. Finally, a straightforward measurement of the Li(+) compensation depth is shown to yield estimates of the vacancy-related defect concentration in p-type FZ crystals.

  17. NASA Glenn Steady-State Heat Pipe Code GLENHP: Compilation for 64- and 32-Bit Windows Platforms

    NASA Technical Reports Server (NTRS)

    Tower, Leonard K.; Geng, Steven M.

    2016-01-01

    A new version of the NASA Glenn Steady State Heat Pipe Code, designated "GLENHP," is introduced here. This represents an update to the disk operating system (DOS) version LERCHP reported in NASA/TM-2000-209807. The new code operates on 32- and 64-bit Windows-based platforms from within the 32-bit command prompt window. An additional evaporator boundary condition and other features are provided.

  18. LDPC decoder with a limited-precision FPGA-based floating-point multiplication coprocessor

    NASA Astrophysics Data System (ADS)

    Moberly, Raymond; O'Sullivan, Michael; Waheed, Khurram

    2007-09-01

    Implementing the sum-product algorithm, in an FPGA with an embedded processor, invites us to consider a tradeoff between computational precision and computational speed. The algorithm, known outside of the signal processing community as Pearl's belief propagation, is used for iterative soft-decision decoding of LDPC codes. We determined the feasibility of a coprocessor that will perform product computations. Our FPGA-based coprocessor (design) performs computer algebra with significantly less precision than the standard (e.g. integer, floating-point) operations of general purpose processors. Using synthesis, targeting a 3,168 LUT Xilinx FPGA, we show that key components of a decoder are feasible and that the full single-precision decoder could be constructed using a larger part. Soft-decision decoding by the iterative belief propagation algorithm is impacted both positively and negatively by a reduction in the precision of the computation. Reducing precision reduces the coding gain, but the limited-precision computation can operate faster. A proposed solution offers custom logic to perform computations with less precision, yet uses the floating-point format to interface with the software. Simulation results show the achievable coding gain. Synthesis results help theorize the the full capacity and performance of an FPGA-based coprocessor.

  19. Parametric study of two-body floating-point wave absorber

    NASA Astrophysics Data System (ADS)

    Amiri, Atena; Panahi, Roozbeh; Radfar, Soheil

    2016-03-01

    In this paper, we present a comprehensive numerical simulation of a point wave absorber in deep water. Analyses are performed in both the frequency and time domains. The converter is a two-body floating-point absorber (FPA) with one degree of freedom in the heave direction. Its two parts are connected by a linear mass-spring-damper system. The commercial ANSYS-AQWA software used in this study performs well in considering validations. The velocity potential is obtained by assuming incompressible and irrotational flow. As such, we investigated the effects of wave characteristics on energy conversion and device efficiency, including wave height and wave period, as well as the device diameter, draft, geometry, and damping coefficient. To validate the model, we compared our numerical results with those from similar experiments. Our study results can clearly help to maximize the converter's efficiency when considering specific conditions.

  20. A comparison of inflection point and floating point emissive probe techniques for electric potential measurements in a Hall thruster plasma

    NASA Astrophysics Data System (ADS)

    Sheehan, J. P.; Raitses, Yevgeny; Hershkowitz, Noah; Fisch, Nathaniel

    2010-11-01

    Theory suggests that when increasing the electron emission of an emissive probe the floating potential will saturate ˜Te/e below the plasma potential. This can introduce significant errors in plasma potential measurements in Hall thrusters where Te> 10 eV. The method of determining the plasma potential from the inflection point of emissive IV traces in the limit of zero emission may give a more accurate measurement of the plasma potential. The two methods are compared in a Hall thruster where ne˜10^11 cm-3, Te˜20 eV, and ion flows are significant. The results can be generalized to other types of plasmas.

  1. Quantifying the Impact of Single Bit Flips on Floating Point Arithmetic

    SciTech Connect

    Elliott, James J; Mueller, Frank; Stoyanov, Miroslav K; Webster, Clayton G

    2013-08-01

    In high-end computing, the collective surface area, smaller fabrication sizes, and increasing density of components have led to an increase in the number of observed bit flips. If mechanisms are not in place to detect them, such flips produce silent errors, i.e. the code returns a result that deviates from the desired solution by more than the allowed tolerance and the discrepancy cannot be distinguished from the standard numerical error associated with the algorithm. These phenomena are believed to occur more frequently in DRAM, but logic gates, arithmetic units, and other circuits are also susceptible to bit flips. Previous work has focused on algorithmic techniques for detecting and correcting bit flips in specific data structures, however, they suffer from lack of generality and often times cannot be implemented in heterogeneous computing environment. Our work takes a novel approach to this problem. We focus on quantifying the impact of a single bit flip on specific floating-point operations. We analyze the error induced by flipping specific bits in the most widely used IEEE floating-point representation in an architecture-agnostic manner, i.e., without requiring proprietary information such as bit flip rates and the vendor-specific circuit designs. We initially study dot products of vectors and demonstrate that not all bit flips create a large error and, more importantly, expected value of the relative magnitude of the error is very sensitive on the bit pattern of the binary representation of the exponent, which strongly depends on scaling. Our results are derived analytically and then verified experimentally with Monte Carlo sampling of random vectors. Furthermore, we consider the natural resilience properties of solvers based on the fixed point iteration and we demonstrate how the resilience of the Jacobi method for linear equations can be significantly improved by rescaling the associated matrix.

  2. FLOS-1R and FLOD-1R Single- and Double-Precision Floating Point Packages for the LINC,

    DTIC Science & Technology

    floating point package for the LINC. The present revision corrects an error in the Add routine, requires fewer memory locations, and is slightly faster than the original program. The functional description of Flod-1R is exactly identical to that of the original program FLOD. Since the original report also described a matching single-precision floating point package, FLOS, the report also describes FLOS. Although FLOS has not been revised, it is given the revised name FLOS-1R in this report. (Modified author

  3. Real-time IP-hologram conversion hardware based on floating point DSPs

    NASA Astrophysics Data System (ADS)

    Oi, Ryutaro; Mishina, Tomoyuki; Yamamoto, Kenji; Okui, Makoto

    2009-02-01

    Holography is a 3-D display method that fully satisfies the visual characteristics of the human eye. However, the hologram must be developed in a darkroom under laser illumination. We attempted hologram generation under white light by adopting an integral photography (IP) technique as the input. In this research, we developed a hardware converter to convert IP input (with 120×66 elemental images) to a hologram with high definition television (HDTV) resolution (approximately 2 million pixels). This conversion could be carried out in real time. In this conversion method, each elemental image can be independently extracted and processed. Our hardware contains twenty 300-MHz floating-point digital signal processors (DSPs) operating in parallel. We verified real-time conversion operations by the implemented hardware.

  4. FloPSy - Search-Based Floating Point Constraint Solving for Symbolic Execution

    NASA Astrophysics Data System (ADS)

    Lakhotia, Kiran; Tillmann, Nikolai; Harman, Mark; de Halleux, Jonathan

    Recently there has been an upsurge of interest in both, Search-Based Software Testing (SBST), and Dynamic Symbolic Execution (DSE). Each of these two approaches has complementary strengths and weaknesses, making it a natural choice to explore the degree to which the strengths of one can be exploited to offset the weakness of the other. This paper introduces an augmented version of DSE that uses a SBST-based approach to handling floating point computations, which are known to be problematic for vanilla DSE. The approach has been implemented as a plug in for the Microsoft Pex DSE testing tool. The paper presents results from both, standard evaluation benchmarks, and two open source programs.

  5. High-Precision Floating-Point Arithmetic in ScientificComputation

    SciTech Connect

    Bailey, David H.

    2004-12-31

    At the present time, IEEE 64-bit floating-point arithmetic is sufficiently accurate for most scientific applications. However, for a rapidly growing body of important scientific computing applications, a higher level of numeric precision is required: some of these applications require roughly twice this level; others require four times; while still others require hundreds or more digits to obtain numerically meaningful results. Such calculations have been facilitated by new high-precision software packages that include high-level language translation modules to minimize the conversion effort. These activities have yielded a number of interesting new scientific results in fields as diverse as quantum theory, climate modeling and experimental mathematics, a few of which are described in this article. Such developments suggest that in the future, the numeric precision used for a scientific computation may be as important to the program design as are the algorithms and data structures.

  6. Interferometric synthetic aperture microscopy implementation on a floating point multi-core digital signal processer

    NASA Astrophysics Data System (ADS)

    Ahmad, Adeel; Ali, Murtaza; South, Fredrick; Monroy, Guillermo L.; Adie, Steven G.; Shemonski, Nathan; Carney, P. Scott; Boppart, Stephen A.

    2013-03-01

    The transition of optical coherence tomography (OCT) technology from the lab environment towards the more challenging clinical and point-of-care settings is continuing at a rapid pace. On one hand this translation opens new opportunities and avenues for growth, while on the other hand it also presents a new set of challenges and constraints under which OCT systems have to operate. OCT systems in the clinical environment are not only required to be user friendly and easy to operate, but should also be portable, have a smaller form factor coupled with low cost and reduced power consumption. Digital signal processors (DSP) are in a unique position to satisfy the computational requirements for OCT at a much lower cost and power consumption compared to the existing platforms such as CPU and graphics processing units (GPUs). In this work, we describe the implementation of optical coherence tomography (OCT) and interferometric synthetic aperture microscopy (ISAM) processing on a floating point multi-core DSP (C6678, Texas Instruments). ISAM is a computationally intensive data processing technique that is based on the re-sampling of the Fourier space of the data to yield spatially invariant transverse resolution in OCT. Preliminary results indicate that 2DISAM processing at 70,000 A-lines/sec and OCT at 180,000 A-lines/sec can be achieved with the current implementation using available DSP hardware.

  7. Optimal Compression of Floating-Point Astronomical Images Without Significant Loss of Information

    NASA Technical Reports Server (NTRS)

    Pence, William D.; White, R. L.; Seaman, R.

    2010-01-01

    We describe a compression method for floating-point astronomical images that gives compression ratios of 6 - 10 while still preserving the scientifically important information in the image. The pixel values are first preprocessed by quantizing them into scaled integer intensity levels, which removes some of the uncompressible noise in the image. The integers are then losslessly compressed using the fast and efficient Rice algorithm and stored in a portable FITS format file. Quantizing an image more coarsely gives greater image compression, but it also increases the noise and degrades the precision of the photometric and astrometric measurements in the quantized image. Dithering the pixel values during the quantization process greatly improves the precision of measurements in the more coarsely quantized images. We perform a series of experiments on both synthetic and real astronomical CCD images to quantitatively demonstrate that the magnitudes and positions of stars in the quantized images can be measured with the predicted amount of precision. In order to encourage wider use of these image compression methods, we have made available a pair of general-purpose image compression programs, called fpack and funpack, which can be used to compress any FITS format image.

  8. Optimal Compression of Floating-Point Astronomical Images Without Significant Loss of Information

    NASA Astrophysics Data System (ADS)

    Pence, W. D.; White, R. L.; Seaman, R.

    2010-09-01

    We describe a compression method for floating-point astronomical images that gives compression ratios of 6–10 while still preserving the scientifically important information in the image. The pixel values are first preprocessed by quantizing them into scaled integer intensity levels, which removes some of the uncompressible noise in the image. The integers are then losslessly compressed using the fast and efficient Rice algorithm and stored in a portable FITS format file. Quantizing an image more coarsely gives greater image compression, but it also increases the noise and degrades the precision of the photometric and astrometric measurements in the quantized image. Dithering the pixel values during the quantization process can greatly improve the precision of measurements in the images. This is especially important if the analysis algorithm relies on the mode or the median, which would be similarly quantized if the pixel values are not dithered. We perform a series of experiments on both synthetic and real astronomical CCD images to quantitatively demonstrate that the magnitudes and positions of stars in the quantized images can be measured with the predicted amount of precision. In order to encourage wider use of these image compression methods, we have made available a pair of general-purpose image compression programs, called fpack and funpack, which can be used to compress any FITS format image.

  9. Evaluation of accelerated iterative x-ray CT image reconstruction using floating point graphics hardware

    NASA Astrophysics Data System (ADS)

    Kole, J. S.; Beekman, F. J.

    2006-02-01

    Statistical reconstruction methods offer possibilities to improve image quality as compared with analytical methods, but current reconstruction times prohibit routine application in clinical and micro-CT. In particular, for cone-beam x-ray CT, the use of graphics hardware has been proposed to accelerate the forward and back-projection operations, in order to reduce reconstruction times. In the past, wide application of this texture hardware mapping approach was hampered owing to limited intrinsic accuracy. Recently, however, floating point precision has become available in the latest generation commodity graphics cards. In this paper, we utilize this feature to construct a graphics hardware accelerated version of the ordered subset convex reconstruction algorithm. The aims of this paper are (i) to study the impact of using graphics hardware acceleration for statistical reconstruction on the reconstructed image accuracy and (ii) to measure the speed increase one can obtain by using graphics hardware acceleration. We compare the unaccelerated algorithm with the graphics hardware accelerated version, and for the latter we consider two different interpolation techniques. A simulation study of a micro-CT scanner with a mathematical phantom shows that at almost preserved reconstructed image accuracy, speed-ups of a factor 40 to 222 can be achieved, compared with the unaccelerated algorithm, and depending on the phantom and detector sizes. Reconstruction from physical phantom data reconfirms the usability of the accelerated algorithm for practical cases.

  10. Evaluation of accelerated iterative x-ray CT image reconstruction using floating point graphics hardware.

    PubMed

    Kole, J S; Beekman, F J

    2006-02-21

    Statistical reconstruction methods offer possibilities to improve image quality as compared with analytical methods, but current reconstruction times prohibit routine application in clinical and micro-CT. In particular, for cone-beam x-ray CT, the use of graphics hardware has been proposed to accelerate the forward and back-projection operations, in order to reduce reconstruction times. In the past, wide application of this texture hardware mapping approach was hampered owing to limited intrinsic accuracy. Recently, however, floating point precision has become available in the latest generation commodity graphics cards. In this paper, we utilize this feature to construct a graphics hardware accelerated version of the ordered subset convex reconstruction algorithm. The aims of this paper are (i) to study the impact of using graphics hardware acceleration for statistical reconstruction on the reconstructed image accuracy and (ii) to measure the speed increase one can obtain by using graphics hardware acceleration. We compare the unaccelerated algorithm with the graphics hardware accelerated version, and for the latter we consider two different interpolation techniques. A simulation study of a micro-CT scanner with a mathematical phantom shows that at almost preserved reconstructed image accuracy, speed-ups of a factor 40 to 222 can be achieved, compared with the unaccelerated algorithm, and depending on the phantom and detector sizes. Reconstruction from physical phantom data reconfirms the usability of the accelerated algorithm for practical cases.

  11. Floating-Point Modules Targeted for Use with RC Compilation Tools

    NASA Technical Reports Server (NTRS)

    Sahin, Ibrahin; Gloster, Clay S.

    2000-01-01

    Reconfigurable Computing (RC) has emerged as a viable computing solution for computationally intensive applications. Several applications have been mapped to RC system and in most cases, they provided the smallest published execution time. Although RC systems offer significant performance advantages over general-purpose processors, they require more application development time than general-purpose processors. This increased development time of RC systems provides the motivation to develop an optimized module library with an assembly language instruction format interface for use with future RC system that will reduce development time significantly. In this paper, we present area/performance metrics for several different types of floating point (FP) modules that can be utilized to develop complex FP applications. These modules are highly pipelined and optimized for both speed and area. Using these modules, and example application, FP matrix multiplication, is also presented. Our results and experiences show, that with these modules, 8-10X speedup over general-purpose processors can be achieved.

  12. Verification of Numerical Programs: From Real Numbers to Floating Point Numbers

    NASA Technical Reports Server (NTRS)

    Goodloe, Alwyn E.; Munoz, Cesar; Kirchner, Florent; Correnson, Loiec

    2013-01-01

    Numerical algorithms lie at the heart of many safety-critical aerospace systems. The complexity and hybrid nature of these systems often requires the use of interactive theorem provers to verify that these algorithms are logically correct. Usually, proofs involving numerical computations are conducted in the infinitely precise realm of the field of real numbers. However, numerical computations in these algorithms are often implemented using floating point numbers. The use of a finite representation of real numbers introduces uncertainties as to whether the properties veri ed in the theoretical setting hold in practice. This short paper describes work in progress aimed at addressing these concerns. Given a formally proven algorithm, written in the Program Verification System (PVS), the Frama-C suite of tools is used to identify sufficient conditions and verify that under such conditions the rounding errors arising in a C implementation of the algorithm do not affect its correctness. The technique is illustrated using an algorithm for detecting loss of separation among aircraft.

  13. Numerical computation of spherical harmonics of arbitrary degree and order by extending exponent of floating point numbers

    NASA Astrophysics Data System (ADS)

    Fukushima, Toshio

    2012-04-01

    By extending the exponent of floating point numbers with an additional integer as the power index of a large radix, we compute fully normalized associated Legendre functions (ALF) by recursion without underflow problem. The new method enables us to evaluate ALFs of extremely high degree as 232 = 4,294,967,296, which corresponds to around 1 cm resolution on the Earth's surface. By limiting the application of exponent extension to a few working variables in the recursion, choosing a suitable large power of 2 as the radix, and embedding the contents of the basic arithmetic procedure of floating point numbers with the exponent extension directly in the program computing the recurrence formulas, we achieve the evaluation of ALFs in the double-precision environment at the cost of around 10% increase in computational time per single ALF. This formulation realizes meaningful execution of the spherical harmonic synthesis and/or analysis of arbitrary degree and order.

  14. Toward a formal verification of a floating-point coprocessor and its composition with a central processing unit

    NASA Technical Reports Server (NTRS)

    Pan, Jing; Levitt, Karl N.; Cohen, Gerald C.

    1991-01-01

    Discussed here is work to formally specify and verify a floating point coprocessor based on the MC68881. The HOL verification system developed at Cambridge University was used. The coprocessor consists of two independent units: the bus interface unit used to communicate with the cpu and the arithmetic processing unit used to perform the actual calculation. Reasoning about the interaction and synchronization among processes using higher order logic is demonstrated.

  15. The application of the ADSP-21020 40-bit floating point DSP microprocessor in a digital Doppler radar

    SciTech Connect

    Robinson, S.H.; Morrison, R.E.

    1991-08-26

    A continuous wave doppler radar system has been designed which is portable, easily deployable and can be remotely controlled. The system is immune to ground clutter and is used for wind speed detection and direction determination. Nearly real time digital signal processing is performed by an Analog Devices ADSP-21020, a 40-bit floating point Digital Signal Processing (DSP) microprocessor. This paper provides an overview of the design of the system including the radio frequency (RF) to digital interface. The various DSP detection algorithms are discussed and compared to system performance and sensitivity. Finally, DSP performance is compared to the performance of an earlier system using Analog Device's ADSP-2100. 6 refs.

  16. Floating-point coprocessor for fault detection and isolation in electronically controlled internal combustion engines. Final technical report

    SciTech Connect

    Yu, T.L.; Ribbens, W.B.

    1991-09-01

    The report details the design of a floating-point coprocessor intended for real-time fault detection in electronically controlled internal combustion engines. The fault detection strategies are based on dynamic models of various engine subsystems and require the use of state estimators. The coprocessor can be operated at a clock rate of 24 MHz, and is capable of operating up to sixteen state estimators in real time. The design is suitable for application to internal combustion engines used for vehicle propulsion or power generation, whether diesel or spark ignited.

  17. Numerical computation of spherical harmonics of arbitrary degree and order by extending exponent of floating point numbers: III integral

    NASA Astrophysics Data System (ADS)

    Fukushima, Toshio

    2014-02-01

    The integrals of fully normalized associated Legendre function (fnALF) of extremely high degree and order such as 223=8 388 608 can be obtained without underflow problems if the point values of fnALF are properly given by using an exponent extension of the floating point numbers (Fukushima, T., 2012a. J. Geod., 86, 271-285; Fukushima, T., 2012c. J. Geod., 86, 1019-1028). A dynamic termination of the exponent extension during the fixed-order increasing-degree recursions significantly reduces the increase in CPU time caused by the exponent extension. Also, the sectorial integrals are found to be correctly obtained by the forward recursion only even when the backward recursion has been claimed to be necessary (Paul, M.K., 1978, Bull. Geod., 52, 177-190; Gerstl, M., 1980, Manuscr. Geod., 5, 181-199).

  18. Hardware description ADSP-21020 40-bit floating point DSP as designed in a remotely controlled digital CW Doppler radar

    SciTech Connect

    Morrison, R.E.; Robinson, S.H.

    1991-01-01

    A continuous wave Doppler radar system has been designed which is portable, easily deployed, and remotely controlled. The heart of this system is a DSP/control board using Analog Devices ADSP-21020 40-bit floating point digital signal processor (DSP) microprocessor. Two 18-bit audio A/D converters provide digital input to the DSP/controller board for near real time target detection. Program memory for the DSP is dual ported with an Intel 87C51 microcontroller allowing DSP code to be up-loaded or down-loaded from a central controlling computer. The 87C51 provides overall system control for the remote radar and includes a time-of-day/day-of-year real time clock, system identification (ID) switches, and input/output (I/O) expansion by an Intel 82C55 I/O expander. 5 refs., 8 figs., 2 tabs.

  19. Desirable floating-point arithmetic and elementary functions for numerical computation

    NASA Technical Reports Server (NTRS)

    Hull, T. E.

    1978-01-01

    The topics considered are: (1) the base of the number system, (2) precision control, (3) number representation, (4) arithmetic operations, (5) other basic operations, (6) elementary functions, and (7) exception handling. The possibility of doing without fixed-point arithmetic is also mentioned. The specifications are intended to be entirely at the level of a programming language such as FORTRAN. The emphasis is on convenience and simplicity from the user's point of view. Conforming to such specifications would have obvious beneficial implications for the portability of numerical software, and for proving programs correct, as well as attempting to provide facilities which are most suitable for the user. The specifications are not complete in every detail, but it is intended that they be complete in spirit - some further details, especially syntatic details, would have to be provided, but the proposals are otherwise relatively complete.

  20. Impact of the floating-point precision and interpolation scheme on the results of DNS of turbulence by pseudo-spectral codes

    NASA Astrophysics Data System (ADS)

    Homann, Holger; Dreher, Jürgen; Grauer, Rainer

    2007-10-01

    In this paper we investigate the impact of the floating-point precision and interpolation scheme on the results of direct numerical simulations (DNS) of turbulence by pseudo-spectral codes. Three different types of floating-point precision configurations show no differences in the statistical results. This implies that single precision computations allow for increased Reynolds numbers due to the reduced amount of memory needed. The interpolation scheme for obtaining velocity values at particle positions has a noticeable impact on the Lagrangian acceleration statistics. A tri-cubic scheme results in a slightly broader acceleration probability density function than a tri-linear scheme. Furthermore the scaling behavior obtained by the cubic interpolation scheme exhibits a tendency towards a slightly increased degree of intermittency compared to the linear one.

  1. Design of pixel electronics based on asynchronous self-reset approach with floating-point output representation for high dynamic range imagers

    NASA Astrophysics Data System (ADS)

    Nascetti, A.; Valerio, P.

    2011-01-01

    A readout circuit suitable for multi-channel preamplifiers for pixellated detectors, hybrid detectors or thin film on asic imagers, for applications requiring large dynamic range such as computed tomography is discussed. The circuit implements an asynchronous self-reset with residue conversion scheme combined with a floating point representation of the input current. This solution allows to reach a very high dynamic range with good linearity while ensuring a compact output format. In particular, in the present implementation the input current range extends from 50 fA up to 820 nA corresponding to a 144 dB dynamic range which is equivalent to a 24-bit code. However the proposed scheme only uses 16 output bits for the floating point representation with 12-bit constant relative resolution: 12 bits serve for the output value itself and 4 for storing the position of the transition point between integer and fractional part. In addition, an analytical study of the achievable imaging performances shows that no significant degradation of the SNR is expected for the 12-bit constant relative resolution implementation with respect to the full 24-bit resolution scheme. Finally, the main building blocks of the circuit are analyzed in detail and their characteristics are put in relationship with the overall system performances.

  2. Implementation of the DAST ARW II control laws using an 8086 microprocessor and an 8087 floating-point coprocessor. [drones for aeroelasticity research

    NASA Technical Reports Server (NTRS)

    Kelly, G. L.; Berthold, G.; Abbott, L.

    1982-01-01

    A 5 MHZ single-board microprocessor system which incorporates an 8086 CPU and an 8087 Numeric Data Processor is used to implement the control laws for the NASA Drones for Aerodynamic and Structural Testing, Aeroelastic Research Wing II. The control laws program was executed in 7.02 msec, with initialization consuming 2.65 msec and the control law loop 4.38 msec. The software emulator execution times for these two tasks were 36.67 and 61.18, respectively, for a total of 97.68 msec. The space, weight and cost reductions achieved in the present, aircraft control application of this combination of a 16-bit microprocessor with an 80-bit floating point coprocessor may be obtainable in other real time control applications.

  3. Stools - floating

    MedlinePlus

    ... absorption of nutrients ( malabsorption ) or too much gas (flatulence). Considerations Most causes of floating stools are harmless. ... Elsevier Saunders; 2016:chap 140. Read More Gas - flatulence Malabsorption Review Date 5/11/2016 Updated by: ...

  4. On floats and float tests

    NASA Technical Reports Server (NTRS)

    Seewald, Friedrich

    1931-01-01

    The principal source of information on float resistance is the model test. In view of the insuperable difficulties opposing any attempt at theoretical treatment of the resistance problem, particularly at attitudes which tend toward satisfactory take-off, such as the transitory stage to planing, the towing test is and will remain the primary method for some time.

  5. 40 CFR 426.50 - Applicability; description of the float glass manufacturing subcategory.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... float glass manufacturing subcategory. 426.50 Section 426.50 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS GLASS MANUFACTURING POINT SOURCE CATEGORY Float Glass Manufacturing Subcategory § 426.50 Applicability; description of the float...

  6. 40 CFR 426.50 - Applicability; description of the float glass manufacturing subcategory.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... float glass manufacturing subcategory. 426.50 Section 426.50 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS GLASS MANUFACTURING POINT SOURCE CATEGORY Float Glass Manufacturing Subcategory § 426.50 Applicability; description of the float...

  7. Tank Tests of Twin Seaplane Floats

    NASA Technical Reports Server (NTRS)

    Herrman, H; Kempf, G; Kloess, H

    1928-01-01

    The following report contains the most essential data for the hydrodynamic portion of the twin-float problem. The following points were successfully investigated: 1) difference between stationary and nonstationary flow; 2) effect of the shape of the step; 3) effect of distance between floats; 4) effect of nose-heavy and tail-heavy moments; 5) effect of the shape of floats; 6) maneuverability.

  8. "Floating shoulder" injuries.

    PubMed

    Heng, Kenneth

    2016-12-01

    "Floating shoulder" is a rare injury complex resulting from high-energy blunt force trauma to the shoulder, resulting in scapulothoracic dissociation. It is commonly associated with catastrophic neurovascular injury. Two cases of motorcyclists with floating shoulder injuries are described.

  9. WindWaveFloat

    SciTech Connect

    Weinstein, Alla

    2011-11-01

    Presentation from the 2011 Water Peer Review includes in which principal investigator Alla Weinstein discusses project progress in development of a floating offshore wind structure - the WindFloat - and incorporation therin of a Spherical Wave Energy Device.

  10. Floating: sink or swim.

    PubMed

    Pronger, L

    1995-12-01

    Budget restrictions, fewer human resources and fluctuating patient populations have combined to increase the practice of floating general duty nurses. Floating occurs when a nurse from an overstaffed unit, based on patient load, is required to work in another unit that is understaffed. Floating is not a new practice, but it has always been an emotionally charged issue. Today, with more float pool nurses seeking the security of a permanent position in a home unit, the issue has increased in intensity.

  11. The Design of Floats

    NASA Technical Reports Server (NTRS)

    Sottorf, W

    1938-01-01

    Following a summary of the multiplicity of domestic and foreign floats and a brief enumeration of the requirements of floats, the essential form parameters and their effect on the qualities of floats are detailed. On this basis a standard float design is developed which in model families with varying length/beam ratio and angle of dead rise is analyzed by an experimental method which permits its best utilization on any airplane.

  12. 14 CFR 25.535 - Auxiliary float loads.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    .... The resultant water load must be applied in the plane of symmetry of the float at a point three... r y=ratio of the lateral distance between the center of gravity and the plane of symmetry of the... the plane of symmetry of the float at a point one-fourth of the distance from the bow to the step...

  13. 14 CFR 25.535 - Auxiliary float loads.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    .... The resultant water load must be applied in the plane of symmetry of the float at a point three... r y=ratio of the lateral distance between the center of gravity and the plane of symmetry of the... the plane of symmetry of the float at a point one-fourth of the distance from the bow to the step...

  14. 14 CFR 25.535 - Auxiliary float loads.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    .... The resultant water load must be applied in the plane of symmetry of the float at a point three... r y=ratio of the lateral distance between the center of gravity and the plane of symmetry of the... the plane of symmetry of the float at a point one-fourth of the distance from the bow to the step...

  15. 14 CFR 25.535 - Auxiliary float loads.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    .... The resultant water load must be applied in the plane of symmetry of the float at a point three... r y=ratio of the lateral distance between the center of gravity and the plane of symmetry of the... the plane of symmetry of the float at a point one-fourth of the distance from the bow to the step...

  16. 14 CFR 25.535 - Auxiliary float loads.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    .... The resultant water load must be applied in the plane of symmetry of the float at a point three... r y=ratio of the lateral distance between the center of gravity and the plane of symmetry of the... the plane of symmetry of the float at a point one-fourth of the distance from the bow to the step...

  17. Float Zone Workshop

    NASA Technical Reports Server (NTRS)

    Naumann, R. J.

    1980-01-01

    A summary of the Analytical Float Zone Experiment System (AFZES) concept is presented. The types of experiments considered for such a facility are discussed. Reports from various industrial producers and users of float zone material are presented. Special emphasis is placed on state-of-the-art developments in low gravity manufacturing and their applications to space processing.

  18. Floating assembly of diatom Coscinodiscus sp. microshells.

    PubMed

    Wang, Yu; Pan, Junfeng; Cai, Jun; Zhang, Deyuan

    2012-03-30

    Diatoms have silica frustules with transparent and delicate micro/nano scale structures, two dimensional pore arrays, and large surface areas. Although, the diatom cells of Coscinodiscus sp. live underwater, we found that their valves can float on water and assemble together. Experiments show that the convex shape and the 40 nm sieve pores of the valves allow them to float on water, and that the buoyancy and the micro-range attractive forces cause the valves to assemble together at the highest point of water. As measured by AFM calibrated glass needles fixed in manipulator, the buoyancy force on a single floating valve may reach up to 10 μN in water. Turning the valves over, enlarging the sieve pores, reducing the surface tension of water, or vacuum pumping may cause the floating valves to sink. After the water has evaporated, the floating valves remained in their assembled state and formed a monolayer film. The bonded diatom monolayer may be valuable in studies on diatom based optical devices, biosensors, solar cells, and batteries, to better use the optical and adsorption properties of frustules. The floating assembly phenomenon can also be used as a self-assembly method for fabricating monolayer of circular plates.

  19. Floating emitter solar cell

    NASA Technical Reports Server (NTRS)

    Chih, Sah (Inventor); Cheng, Li-Jen (Inventor)

    1987-01-01

    A front surface contact floating emitter solar cell transistor is provided in a semiconductor body (n-type), in which floating emitter sections (p-type) are diffused or implanted in the front surface. Between the emitter sections, a further section is diffused or implanted in the front surface, but isolated from the floating emitter sections, for use either as a base contact to the n-type semiconductor body, in which case the section is doped n+, or as a collector for the adjacent emitter sections.

  20. Numerical computation of spherical harmonics of arbitrary degree and order by extending exponent of floating point numbers: II first-, second-, and third-order derivatives

    NASA Astrophysics Data System (ADS)

    Fukushima, Toshio

    2012-11-01

    We confirm that the first-, second-, and third-order derivatives of fully-normalized Legendre polynomial (LP) and associated Legendre function (ALF) of arbitrary degree and order can be correctly evaluated by means of non-singular fixed-degree formulas (Bosch in Phys Chem Earth 25:655-659, 2000) in the ordinary IEEE754 arithmetic when the values of fully-normalized LP and ALF are obtained without underflow problems, for e.g., using the extended range arithmetic we recently developed (Fukushima in J Geod 86:271-285, 2012). Also, we notice the same correctness for the popular but singular fixed-order formulas unless (1) the order of differentiation is greater than the order of harmonics and (2) the point of evaluation is close to the poles. The new formulation using the fixed-order formulas runs at a negligible extra computational time, i.e., 3-5 % increase in computational time per single ALF when compared with the standard algorithm without the exponent extension. This enables a practical computation of low-order derivatives of spherical harmonics of arbitrary degree and order.

  1. 40 CFR 426.50 - Applicability; description of the float glass manufacturing subcategory.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... float glass manufacturing subcategory. 426.50 Section 426.50 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GLASS MANUFACTURING POINT SOURCE CATEGORY Float Glass Manufacturing Subcategory § 426.50 Applicability; description of the float...

  2. 40 CFR 426.50 - Applicability; description of the float glass manufacturing subcategory.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... float glass manufacturing subcategory. 426.50 Section 426.50 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GLASS MANUFACTURING POINT SOURCE CATEGORY Float Glass Manufacturing Subcategory § 426.50 Applicability; description of the float...

  3. 40 CFR 426.50 - Applicability; description of the float glass manufacturing subcategory.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... float glass manufacturing subcategory. 426.50 Section 426.50 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GLASS MANUFACTURING POINT SOURCE CATEGORY Float Glass Manufacturing Subcategory § 426.50 Applicability; description of the float...

  4. Micromechanisms with floating pivot

    DOEpatents

    Garcia, Ernest J.

    2001-03-06

    A new class of tilting micromechanical mechanisms have been developed. These new mechanisms use floating pivot structures to relieve some of the problems encountered in the use of solid flexible pivots.

  5. Reducing float coal dust

    PubMed Central

    Patts, J.R.; Colinet, J.F.; Janisko, S.J.; Barone, T.L.; Patts, L.D.

    2016-01-01

    Controlling float coal dust in underground coal mines before dispersal into the general airstream can reduce the risk of mine explosions while potentially achieving a more effective and efficient use of rock dust. A prototype flooded-bed scrubber was evaluated for float coal dust control in the return of a continuous miner section. The scrubber was installed inline between the face ventilation tubing and an exhausting auxiliary fan. Airborne and deposited dust mass measurements were collected over three days at set distances from the fan exhaust to assess changes in float coal dust levels in the return due to operation of the scrubber. Mass-based measurements were collected on a per-cut basis and normalized on the basis of per ton mined by the continuous miner. The results show that average float coal dust levels measured under baseline conditions were reduced by more than 90 percent when operating the scrubber. PMID:28018004

  6. Floating Magnet Demonstration.

    ERIC Educational Resources Information Center

    Wake, Masayoshi

    1990-01-01

    A room-temperature demonstration of a floating magnet using a high-temperature superconductor is described. The setup and operation of the apparatus are described. The technical details of the effect are discussed. (CW)

  7. Stabilized floating platforms

    DOEpatents

    Thomas, David G.

    1976-01-01

    The subject invention is directed to a floating platform for supporting nuclear reactors and the like at selected offshore sites. The platform is provided with a stabilizer mechanism which significantly reduces the effects of wave action upon the platform and which comprises a pair of relatively small floats attached by rigid booms to the platform at locations spaced therefrom for reducing wave pitch, acceleration, and the resonance period of the wave.

  8. Hydrodynamic and Aerodynamic Tests of Models of Floats for Single-float Seaplanes NACA Models 41-D, 41-E, 61-A, 73, and 73-A

    NASA Technical Reports Server (NTRS)

    Parkinson, J B; HOUSE R O

    1938-01-01

    Tests were made in the NACA tank and in the NACA 7 by 10 foot wind tunnel on two models of transverse step floats and three models of pointed step floats considered to be suitable for use with single float seaplanes. The object of the program was the reduction of water resistance and spray of single float seaplanes without reducing the angle of dead rise believed to be necessary for the satisfactory absorption of the shock loads. The results indicated that all the models have less resistance and spray than the model of the Mark V float and that the pointed step floats are somewhat superior to the transverse step floats in these respects. Models 41-D, 61-A, and 73 were tested by the general method over a wide range of loads and speeds. The results are presented in the form of curves and charts for use in design calculations.

  9. Floating Versus Sinking

    NASA Astrophysics Data System (ADS)

    Vella, Dominic

    2015-01-01

    Small objects that are more dense than water may still float at the air-water interface because of surface tension. Whether this is possible depends not only on the density and size of the object, but also on its shape and surface properties, whether other objects are nearby, and how gently the object is placed at the interface. This review surveys recent work to quantify when objects can float and when they must sink. Much interest in this area has been driven by studies of the adaptations of water-walking insects to life at interfaces. I therefore discuss these results in the context of this and other applications.

  10. Tethered float liquid level sensor

    DOEpatents

    Daily, III, William Dean

    2016-09-06

    An apparatus for sensing the level of a liquid includes a float, a tether attached to the float, a pulley attached to the tether, a rotation sensor connected to the pulley that senses vertical movement of said float and senses the level of the liquid.

  11. Floated gravity gradiometer and method

    SciTech Connect

    Lautzenhiser, T.V.; Eisner, M.

    1990-09-11

    This patent describes a gravity gradiometer. It comprises: a housing containing a fluid; a float buoyantly supported within the fluid; means for varying the metacentric height of the float; and means for obtaining a measure of the gravitational gradient acting on the float resulting from varying the metacentric height.

  12. Compound floating pivot micromechanisms

    DOEpatents

    Garcia, Ernest J.

    2001-04-24

    A new class of tilting micromechanical mechanisms have been developed. These new mechanisms use compound floating pivot structures to attain far greater tilt angles than are practical using other micromechanical techniques. The new mechanisms are also capable of bi-directional tilt about multiple axes.

  13. Why Do Things Float?

    ERIC Educational Resources Information Center

    Selley, Nicholas

    1993-01-01

    Combines two strands: one being an exposition of the variety of explanations which are given for the phenomenon of floating; the other being the pedagogical implications which arise from the use of alternative models in science. Attention is drawn to the ethical questions that may arise when primary science seems to conflict with accepted…

  14. Float processing of high-temperature complex silicate glasses and float baths used for same

    NASA Technical Reports Server (NTRS)

    Cooper, Reid Franklin (Inventor); Cook, Glen Bennett (Inventor)

    2000-01-01

    A float glass process for production of high melting temperature glasses utilizes a binary metal alloy bath having the combined properties of a low melting point, low reactivity with oxygen, low vapor pressure, and minimal reactivity with the silicate glasses being formed. The metal alloy of the float medium is exothermic with a solvent metal that does not readily form an oxide. The vapor pressure of both components in the alloy is low enough to prevent deleterious vapor deposition, and there is minimal chemical and interdiffusive interaction of either component with silicate glasses under the float processing conditions. Alloys having the desired combination of properties include compositions in which gold, silver or copper is the solvent metal and silicon, germanium or tin is the solute, preferably in eutectic or near-eutectic compositions.

  15. Genetics Home Reference: Floating-Harbor syndrome

    MedlinePlus

    ... Understand Genetics Home Health Conditions Floating-Harbor syndrome Floating-Harbor syndrome Enable Javascript to view the expand/ ... boxes. Download PDF Open All Close All Description Floating-Harbor syndrome is a disorder involving short stature, ...

  16. Floating-diffusion electrometer with adjustable sensitivity

    NASA Technical Reports Server (NTRS)

    Tower, John R. (Inventor)

    1989-01-01

    The effective capacitance of the floating diffusion in a floating-diffusion electrometer is modified to adjust electrometer sensitivity. This is done by changing the direct potential applied to a gate electrode proximate to the floating diffusion.

  17. Floating production systems planned for Italy, Nigeria

    SciTech Connect

    Not Available

    1985-05-01

    EMH has signed a contract to design, fabricate and install a permanent deepwater, gravity-based single-point mooring (SPM) system and floating oil storage facility in Societa Energio Montedison's (SEM) Vega field off Italy. The design of the system is described. The system is designed to accomodate production rates of 75,000 bpd. The oil will be loaded from the storage tanker into shuttle tankers which will take it to area refineries. The shuttle tankers can moor either in tandem or side-by-side for loading. Also described in this paper are three Nigerian offshore fields -- Akam, Adanga and Ebughu -- being developed by Ashland Oil. They will be brought onstream through the use of an integrated floating production, storage and offloading (FPSO) system. Production from all three fields will be piped to a central manifold platform to which a tanker will be permanently moored via a soft-yoke mooring system.

  18. Does It Sink or Float?

    ERIC Educational Resources Information Center

    McDonald, Judith Richards

    2012-01-01

    This activity is designed to teach prekindergarten to second grade students about the concept of sink or float through an inquiry activity. Students will use familiar objects to predict and test the properties of sink and float. Background information is offered to teachers to assist them with this activity. This lesson begins with an engaging…

  19. Liquid encapsulated float zone process and apparatus

    NASA Technical Reports Server (NTRS)

    Naumann, Robert J. (Inventor); Frazier, Donald O. (Inventor); Lehoczky, Sandor L. (Inventor); Vlasse, Marcus (Inventor); Facemire, Barbara R. (Inventor)

    1988-01-01

    The process and apparatus for growing crystals using float zone techniques are described. A rod of crystalline materials is disposed in a cylindrical container, leaving a space between the rod and container walls. This space is filled with an encapsulant, selected to have a slightly lower melting point than the crystalline material. The rod is secured to a container end cap at one end and to a shaft at its other end. A piston slides over the rod and provides pressure to prevent loss of volatile components upon melting of the rod. Prior to melting the rod the container is first heated to melt the encapsulant, with any off-gas from this step being vented to a cavity behind the piston. The piston moves slightly forward owing to volume change upon melting of the encapsulant, and the vent passageway is closed. The container is then moved longitudinally through a heated zone to progressively melt sections of the rod as in conventional float zone processes. The float zone technique may be used in the microgravity environment of space.

  20. Floating Silicon Method

    SciTech Connect

    Kellerman, Peter

    2013-12-21

    The Floating Silicon Method (FSM) project at Applied Materials (formerly Varian Semiconductor Equipment Associates), has been funded, in part, by the DOE under a “Photovoltaic Supply Chain and Cross Cutting Technologies” grant (number DE-EE0000595) for the past four years. The original intent of the project was to develop the FSM process from concept to a commercially viable tool. This new manufacturing equipment would support the photovoltaic industry in following ways: eliminate kerf losses and the consumable costs associated with wafer sawing, allow optimal photovoltaic efficiency by producing high-quality silicon sheets, reduce the cost of assembling photovoltaic modules by creating large-area silicon cells which are free of micro-cracks, and would be a drop-in replacement in existing high efficiency cell production process thereby allowing rapid fan-out into the industry.

  1. Floating into Deep Space

    NASA Astrophysics Data System (ADS)

    La Frenais, R.; Saraceno, T.; Powell, J.

    2014-04-01

    Is it possible for spaceflight to become more sustainable? Artist and architect Tomas Saraceno proposes a long-term artscience research project based on his initial work with solar balloons to join with the efforts of engineers such as John Powell, working on the Airship to Orbit experiments, which describe a three stage process of using airships to fly to a large suborbital "Dark Sky Station' then literally floating into orbit with additional electrical and chemical propulsion. (See: http://www.jpaerospace.com) In his artworks Tomás Saraceno proposes cell-like flying cities as possible architectonic living spaces in direct reference to Buckminster Fuller's Cloud Nine (circa 1960). The fantastic architectural utopia Cloud Nine consists of a freely floating sphere measuring one mile in diameter that offers living space to several autonomous communities encompassing thousands of inhabitants each. The notion of the cloud is essential to the artist's work. The cloud as metaphor stands for artistic intention, for the meaning of territory and border in today's (urban) society, and for exploring possibilities for the sustainable development of the human living environment. In Saraceno's work this environment is not limited to the earth, but is explicitly conceived to reach into outer space. (Biomimetic Constructions- On the works of Tomás Saraceno By Katharina Schlüter) Saraceno is also interested in human factors experiments using his existing constructions as analogue environments for living on Mars and is proposing carry out a series of workshops, experiments and solar balloon launces in White Sands desert in early 2016 in collaboration with the curator Dr Rob La Frenais, the Rubin Center at The University of Texas at El Paso and various scientific partners.

  2. Electrically floating, near vertical incidence, skywave antenna

    SciTech Connect

    Anderson, Allen A.; Kaser, Timothy G.; Tremblay, Paul A.; Mays, Belva L.

    2014-07-08

    An Electrically Floating, Near Vertical Incidence, Skywave (NVIS) Antenna comprising an antenna element, a floating ground element, and a grounding element. At least part of said floating ground element is positioned between said antenna element and said grounding element. The antenna is separated from the floating ground element and the grounding element by one or more electrical insulators. The floating ground element is separated from said antenna and said grounding element by one or more electrical insulators.

  3. Control development for floating wind

    NASA Astrophysics Data System (ADS)

    Savenije, Feike; Peeringa, Johan

    2014-06-01

    Control of a floating wind turbine has proven to be challenging, but essential for lowering the cost of floating wind energy. Topic of a recent joint R&D project by GustoMSC, MARIN and ECN, is the concept design and verification with coupled simulations and model tests of the GustoMSC Tri-Floater. Only using an integral design approach, including mooring and control design, a cost effective system can be obtained. In this project, ECN developed a general floating wind turbine control strategy and applied this in a case study to the GustoMSC Tri-Floater and the OC3Hywind spar, both equipped with the NREL 5MW RWT. The designed controller ensures stable operation, while maintaining proper speed and power regulation. The motions of the floating support are reduced and substantial load reduction has been achieved.

  4. Floating orbital molecular dynamics simulations.

    PubMed

    Perlt, Eva; Brüssel, Marc; Kirchner, Barbara

    2014-04-21

    We introduce an alternative ab initio molecular dynamics simulation as a unification of Hartree-Fock molecular dynamics and the floating orbital approach. The general scheme of the floating orbital molecular dynamics method is presented. Moreover, a simple but sophisticated guess for the orbital centers is provided to reduce the number of electronic structure optimization steps at each molecular dynamics step. The conservation of total energy and angular momentum is investigated in order to validate the floating orbital molecular dynamics approach with and without application of the initial guess. Finally, a water monomer and a water dimer are simulated, and the influence of the orbital floating on certain properties like the dipole moment is investigated.

  5. Skylab floating ice experiment

    NASA Technical Reports Server (NTRS)

    Campbell, W. J. (Principal Investigator); Ramseier, R. O.; Weaver, R. J.; Weeks, W. F.

    1975-01-01

    The author has identified the following significant results. Coupling of the aircraft data with the ground truth observations proved to be highly successful with interesting results being obtained with IR and SLAR passive microwave techniques, and standard photography. Of particular interest were the results of the PMIS system which operated at 10.69 GHz with both vertical and horizontal polarizations. This was the first time that dual polarized images were obtained from floating ice. In both sea and lake ice, it was possible to distinguish a wide variety of thin ice types because of their large differences in brightness temperatures. It was found that the higher brightness temperature was invariably obtained in the vertically polarized mode, and as the age of the ice increases the brightness temperature increases in both polarizations. Associated with this change in age, the difference in temperature was observed as the different polarizations decreased. It appears that the horizontally polarized data is the most sensitive to variations in ice type for both fresh water and sea ice. The study also showed the great amount of information on ice surface roughness and deformation patterns that can be obtained from X-band SLAR observations.

  6. Floating wind turbine system

    NASA Technical Reports Server (NTRS)

    Viterna, Larry A. (Inventor)

    2009-01-01

    A floating wind turbine system with a tower structure that includes at least one stability arm extending therefrom and that is anchored to the sea floor with a rotatable position retention device that facilitates deep water installations. Variable buoyancy for the wind turbine system is provided by buoyancy chambers that are integral to the tower itself as well as the stability arm. Pumps are included for adjusting the buoyancy as an aid in system transport, installation, repair and removal. The wind turbine rotor is located downwind of the tower structure to allow the wind turbine to follow the wind direction without an active yaw drive system. The support tower and stability arm structure is designed to balance tension in the tether with buoyancy, gravity and wind forces in such a way that the top of the support tower leans downwind, providing a large clearance between the support tower and the rotor blade tips. This large clearance facilitates the use of articulated rotor hubs to reduced damaging structural dynamic loads. Major components of the turbine can be assembled at the shore and transported to an offshore installation site.

  7. Floating into Thin Air

    SciTech Connect

    Hazi, A U

    2007-02-06

    On May 18, 2005, a giant helium balloon carrying the High Energy Focusing Telescope (HEFT) sailed into the spring sky over the deserts of New Mexico. The spindly steel and aluminum gondola that houses the optics, detectors, and other components of the telescope floated for 25 hours after its launch from Fort Sumner, New Mexico. For 21 of those hours, the balloon was nearly 40 kilometers above Earth's surface--almost four times higher than the altitude routinely flown by commercial jet aircraft. In the upper reaches of Earth's atmosphere, HEFT searched the universe for x-ray sources from highly energetic objects such as binary stars, galaxy clusters, and supermassive black holes. Before landing in Arizona, the telescope observed and imaged a dozen scientific targets by capturing photons emitted from these objects in the high-energy (hard) x-ray range (above 10 kiloelectronvolts). Among these targets were the Crab synchrotron nebula, the black hole Cygnus X-1 (one of the brightest x-ray sources in the sky), and the blazar 3C454.3. The scientific data gathered from these targets are among the first focused hard x-ray images returned from high altitudes.

  8. 14 CFR 23.529 - Hull and main float landing conditions.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... as the upward component but is directed inward perpendicularly to the plane of symmetry at a point..., perpendicularly to the plane of symmetry midway between the keel and chine lines of the float, at the...

  9. 14 CFR 23.529 - Hull and main float landing conditions.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... as the upward component but is directed inward perpendicularly to the plane of symmetry at a point..., perpendicularly to the plane of symmetry midway between the keel and chine lines of the float, at the...

  10. 14 CFR 25.529 - Hull and main float landing conditions.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... is directed inward perpendicularly to the plane of symmetry at a point midway between the keel and... symmetry midway between the keel and chine lines of the float, at the same longitudinal station as...

  11. 14 CFR 25.529 - Hull and main float landing conditions.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... is directed inward perpendicularly to the plane of symmetry at a point midway between the keel and... symmetry midway between the keel and chine lines of the float, at the same longitudinal station as...

  12. Detection of Floating Inputs in Logic Circuits

    NASA Technical Reports Server (NTRS)

    Cash, B.; Thornton, M. G.

    1984-01-01

    Simple modification of oscilloscope probe allows easy detection of floating inputs or tristate outputs in digital-IC's. Oscilloscope probe easily modified with 1/4 W resistor and switch for detecting floating inputs in CMOS logic circuits.

  13. Strength Tests on Hulls and Floats

    NASA Technical Reports Server (NTRS)

    Matthaes, K

    1942-01-01

    The present report deals with strength tests on hulls and floats intended in part for the collection of construction data for the design of these components and in part for the stress analysis of the finished hulls and floats.

  14. 40 CFR 65.45 - External floating roof converted into an internal floating roof.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 15 2010-07-01 2010-07-01 false External floating roof converted into an internal floating roof. 65.45 Section 65.45 Protection of Environment ENVIRONMENTAL PROTECTION... External floating roof converted into an internal floating roof. The owner or operator who elects...

  15. 40 CFR 65.45 - External floating roof converted into an internal floating roof.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 15 2011-07-01 2011-07-01 false External floating roof converted into an internal floating roof. 65.45 Section 65.45 Protection of Environment ENVIRONMENTAL PROTECTION... External floating roof converted into an internal floating roof. The owner or operator who elects...

  16. 32 CFR 935.165 - Floating objects.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 32 National Defense 6 2010-07-01 2010-07-01 false Floating objects. 935.165 Section 935.165 National Defense Department of Defense (Continued) DEPARTMENT OF THE AIR FORCE TERRITORIAL AND INSULAR REGULATIONS WAKE ISLAND CODE Public Safety § 935.165 Floating objects. No person may anchor, moor, or beach any boat, barge, or other floating object...

  17. Have Floating Rates Been a Success?

    ERIC Educational Resources Information Center

    Higham, David

    1983-01-01

    Floating exchange rates have not lived up to all expectations, but neither have they performed as badly as some critics have suggested. Examined are the impact of floating rates on balance of payments adjustment, domestic economic policy, and inflation and the claim that floating rates have displayed excessive fluctuations. (Author/RM)

  18. Flinking: Neither Floating nor Sinking.

    ERIC Educational Resources Information Center

    Wilson, Roger B.

    1993-01-01

    Describes an activity that challenges students to make an object that, when released under water, does not float up or sink down. The main concept this activity investigates is the density of ordinary objects in comparison to the density of water. (PR)

  19. Floating Ring-Groove Lapper

    NASA Technical Reports Server (NTRS)

    Williams, Robert L., Sr.; Williams, Robert L., Jr.; Chase, Timothy L.

    1992-01-01

    Tool fits out-of-round seal groove and laps it to fine finish without binding. Includes floating lapping pieces riding freely in groove, and are curved to match nominal diameter of groove. One lapping piece tightened so it does not move relative to disk.

  20. Float It Down the River.

    ERIC Educational Resources Information Center

    Brendzel, Sharon; Orfan, Lucy; Schuhmacher, Robert

    2000-01-01

    Presents an activity that involves students in a hands-on, creative project in which they use higher order thinking skills while designing and studying the basics of floating devices. Focuses on inquiry, a number of scientific principles, and the relationship between mathematics and science. (ASK)

  1. Designing seaplane hulls and floats

    NASA Technical Reports Server (NTRS)

    Benoit,

    1926-01-01

    Experimental data, such as the results of tank tests of models, render it possible to predict, at least in principle, as to how a hull or float of a given shape will comport itself. We will see further along, however, how uncertain these methods are and how they leave room for empiricism, which will reign for a long time yet in seaplane research bureaus.

  2. High-precision arithmetic in mathematical physics

    DOE PAGES

    Bailey, David H.; Borwein, Jonathan M.

    2015-05-12

    For many scientific calculations, particularly those involving empirical data, IEEE 32-bit floating-point arithmetic produces results of sufficient accuracy, while for other applications IEEE 64-bit floating-point is more appropriate. But for some very demanding applications, even higher levels of precision are often required. Furthermore, this article discusses the challenge of high-precision computation, in the context of mathematical physics, and highlights what facilities are required to support future computation, in light of emerging developments in computer architecture.

  3. Float zone experiments in space

    NASA Technical Reports Server (NTRS)

    Verhoeven, J. D.; Noack, M. A.; Gill, W. N.; Hau, C. C.

    1984-01-01

    The molten zone/freezing crystal interface system and all the mechanisms were examined. If Marangoni convection produces oscillatory flows in the float zone of semiconductor materials, such as silicon, then it is unlikely that superior quality crystals can be grown in space using this process. The major goals were: (1) to determine the conditions for the onset of Marangoni flows in molten tin, a model system for low Prandtl number molten semiconductor materials; (2) to determine whether the flows can be suppressed by a thin oxide layer; and (3) based on experimental and mathematical analysis, to predict whether oscillatory flows will occur in the float zone silicon geometry in space, and if so, could it be suppressed by thin oxide or nitride films. Techniques were developed to analyze molten tin surfaces in a UHV system in a disk float zone geometry to minimize buoyancy flows. The critical Marangoni number for onset of oscillatory flows was determined to be greater than 4300 on atomically clean molten tin surfaces.

  4. Float Zone Experiments in Space

    NASA Technical Reports Server (NTRS)

    Verhoeven, J. D.

    1985-01-01

    The objective of this work has been to evaluate whether or not Marangoni flow could be suppressed in molten metals by the presence of very thin oxide films. Experimental work has been carried out on molten Sn under UHV conditions. A disk floating zone arrangement was developed to allow in situ Auger examination of molten surfaces. An electron energy loss technique was developed which allows detection of continuous tin oxide films of 6 A or greater. Experiments were planned to detect the effects of oxide formation upon Marangoni flow by measuring: (1) temperature profiles, (2) solid liquid interface shapes, (3) macrosegregation, and (4) the onset of oscillatory Marangoni flow by detecting oscillating temperature variations. Work on (4) showed that oscillatory temperature variations of frequency or = 10 Hz were not present in the disk float zone geometry under conditions of Ma = 4300 with an oxide free molten surface. The disk float zone geometry was modeled with a finite element analysis and temperature and velocity profiles were determined.

  5. 14 CFR 29.753 - Main float design.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Main float design. 29.753 Section 29.753... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Design and Construction Floats and Hulls § 29.753 Main float design. (a) Bag floats. Each bag float must be designed to withstand— (1) The maximum pressure...

  6. 14 CFR 27.753 - Main float design.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Main float design. 27.753 Section 27.753... STANDARDS: NORMAL CATEGORY ROTORCRAFT Design and Construction Floats and Hulls § 27.753 Main float design. (a) Bag floats. Each bag float must be designed to withstand— (1) The maximum pressure...

  7. Acoustic Float for Marine Mammal Monitoring

    DTIC Science & Technology

    2009-09-30

    a matured technology, and is manufactured mainly by two companies, Webb Research (APEX) and Martec (PROVOR). Our original acoustic float, the...adding another microprocessor inside the float as originally planned, we have reprogrammed the APEX float processor board itself (apf9) by changing... echolocation clicks. The analysis revealed that by using ICI information, the ERMA detector was able to reduce the number of false positive detections to less

  8. The impact on seaplane floats during landing

    NASA Technical Reports Server (NTRS)

    Von Karman, TH

    1929-01-01

    In order to make a stress analysis of seaplane floats, and especially of the members connecting the floats with the fuselage, it is of great importance to determine the maximum pressure acting on the floats during landing. Here, the author gives a formula for maximum pressures during landing that permits one to apply experimental results to different bodies and different velocities. The author notes that the formula checks very well with experimental results.

  9. Modeling International Space Station (ISS) Floating Potentials

    NASA Technical Reports Server (NTRS)

    Ferguson, Dale C.; Gardner, Barbara

    2002-01-01

    The floating potential of the International Space Station (ISS) as a function of the electron current collection of its high voltage solar array panels is derived analytically. Based on Floating Potential Probe (FPP) measurements of the ISS potential and ambient plasma characteristics, it is shown that the ISS floating potential is a strong function of the electron temperature of the surrounding plasma. While the ISS floating potential has so far not attained the pre-flight predicted highly negative values, it is shown that for future mission builds, ISS must continue to provide two-fault tolerant arc-hazard protection for astronauts on EVA.

  10. Modeling International Space Station (ISS) Floating Potentials

    NASA Astrophysics Data System (ADS)

    Ferguson, Dale C.; Gardner, Barbara

    2002-05-01

    The floating potential of the International Space Station (ISS) as a function of the electron current collection of its high voltage solar array panels is derived analytically. Based on Floating Potential Probe (FPP) measurements of the ISS potential and ambient plasma characteristics, it is shown that the ISS floating potential is a strong function of the electron temperature of the surrounding plasma. While the ISS floating potential has so far not attained the pre-flight predicted highly negative values, it is shown that for future mission builds, ISS must continue to provide two-fault tolerant arc-hazard protection for astronauts on EVA.

  11. Does size and buoyancy affect the long-distance transport of floating debris?

    NASA Astrophysics Data System (ADS)

    Ryan, Peter G.

    2015-08-01

    Floating persistent debris, primarily made from plastic, disperses long distances from source areas and accumulates in oceanic gyres. However, biofouling can increase the density of debris items to the point where they sink. Buoyancy is related to item volume, whereas fouling is related to surface area, so small items (which have high surface area to volume ratios) should start to sink sooner than large items. Empirical observations off South Africa support this prediction: moving offshore from coastal source areas there is an increase in the size of floating debris, an increase in the proportion of highly buoyant items (e.g. sealed bottles, floats and foamed plastics), and a decrease in the proportion of thin items such as plastic bags and flexible packaging which have high surface area to volume ratios. Size-specific sedimentation rates may be one reason for the apparent paucity of small plastic items floating in the world’s oceans.

  12. 14 CFR 27.753 - Main float design.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    .... (a) Bag floats. Each bag float must be designed to withstand— (1) The maximum pressure differential that might be developed at the maximum altitude for which certification with that float is...

  13. 14 CFR 27.753 - Main float design.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    .... (a) Bag floats. Each bag float must be designed to withstand— (1) The maximum pressure differential that might be developed at the maximum altitude for which certification with that float is...

  14. 14 CFR 29.753 - Main float design.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    .... (a) Bag floats. Each bag float must be designed to withstand— (1) The maximum pressure differential that might be developed at the maximum altitude for which certification with that float is...

  15. 14 CFR 29.753 - Main float design.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    .... (a) Bag floats. Each bag float must be designed to withstand— (1) The maximum pressure differential that might be developed at the maximum altitude for which certification with that float is...

  16. 14 CFR 27.753 - Main float design.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    .... (a) Bag floats. Each bag float must be designed to withstand— (1) The maximum pressure differential that might be developed at the maximum altitude for which certification with that float is...

  17. 14 CFR 29.753 - Main float design.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    .... (a) Bag floats. Each bag float must be designed to withstand— (1) The maximum pressure differential that might be developed at the maximum altitude for which certification with that float is...

  18. 14 CFR 29.753 - Main float design.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    .... (a) Bag floats. Each bag float must be designed to withstand— (1) The maximum pressure differential that might be developed at the maximum altitude for which certification with that float is...

  19. 14 CFR 27.753 - Main float design.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    .... (a) Bag floats. Each bag float must be designed to withstand— (1) The maximum pressure differential that might be developed at the maximum altitude for which certification with that float is...

  20. Floating patella associated with lymphoedema

    PubMed Central

    Vun, Shen Hwa; Bayam, Levent; Drampalos, Efstathios; Jesry, Mohammed; Fadel, George

    2015-01-01

    Ipsilateral injury of more than one component of the knee extensor apparatus is rare. It is mostly associated with previous trauma, surgery, immunosuppression therapy and systemic disease. We present the first documented case of a spontaneous bifocal disruption of the knee extensor apparatus (i.e. floating patella) associated with lymphoedema. This case highlights the importance of considering lymphoedema as another risk factor for rupture of the knee extensor apparatus. It also highlights the importance of assessing all components of the knee extensor apparatus in patients presenting with acute knee injuries. PMID:25802253

  1. Self-stabilizing floating tower

    SciTech Connect

    Mougin, G.L.

    1980-12-30

    An offshore floating tower comprises two coaxial cylindrical enclosures interconnected by continuous radial bulkheads forming in the upper portion a ring of damping chambers and in the lower portion a ring of buoyancy tanksaround a bell-shaped chamber which is partially filled with air to produce pneumatic damping of vertical movement of the tower. The upper portion of the tower is separated from the lower portion by a horizontal slab. The upper portion of the internal enclosure is perforated in the vicinity of the horizontal slab.

  2. What is the size of a floating sheath? An answer

    NASA Astrophysics Data System (ADS)

    Voigt, Farina; Naggary, Schabnam; Brinkmann, Ralf Peter

    2016-09-01

    The formation of a non-neutral boundary sheath in front of material surfaces is universal plasma phenomenon. Despite several decades of research, however, not all related issues are fully clarified. In a recent paper, Chabert pointed out that this lack of clarity applies even to the seemingly innocuous question ``What the size of a floating sheath?'' This contribution attempts to provide an answer that is not arbitrary: The size of a floating sheath is defined as the plate separation of an equivalent parallel plate capacitor. The consequences of the definition are explored with the help of a self-consistent sheath model, and a comparison is made with other sheath size definitions. Deutsche Forschungsgemeinschaft within SFB TR 87.

  3. 32 CFR 935.165 - Floating objects.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 32 National Defense 6 2014-07-01 2014-07-01 false Floating objects. 935.165 Section 935.165 National Defense Department of Defense (Continued) DEPARTMENT OF THE AIR FORCE TERRITORIAL AND INSULAR REGULATIONS WAKE ISLAND CODE Public Safety § 935.165 Floating objects. No person may anchor, moor, or...

  4. 32 CFR 935.165 - Floating objects.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 32 National Defense 6 2012-07-01 2012-07-01 false Floating objects. 935.165 Section 935.165 National Defense Department of Defense (Continued) DEPARTMENT OF THE AIR FORCE TERRITORIAL AND INSULAR REGULATIONS WAKE ISLAND CODE Public Safety § 935.165 Floating objects. No person may anchor, moor, or...

  5. 32 CFR 935.165 - Floating objects.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 32 National Defense 6 2013-07-01 2013-07-01 false Floating objects. 935.165 Section 935.165 National Defense Department of Defense (Continued) DEPARTMENT OF THE AIR FORCE TERRITORIAL AND INSULAR REGULATIONS WAKE ISLAND CODE Public Safety § 935.165 Floating objects. No person may anchor, moor, or...

  6. 32 CFR 935.165 - Floating objects.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 32 National Defense 6 2011-07-01 2011-07-01 false Floating objects. 935.165 Section 935.165 National Defense Department of Defense (Continued) DEPARTMENT OF THE AIR FORCE TERRITORIAL AND INSULAR REGULATIONS WAKE ISLAND CODE Public Safety § 935.165 Floating objects. No person may anchor, moor, or...

  7. Future float zone development in industry

    NASA Technical Reports Server (NTRS)

    Sandfort, R. M.

    1980-01-01

    The present industrial requirements for float zone silicon are summarized. Developments desired by the industry in the future are reported. The five most significant problems faced today by the float zone crystal growth method in industry are discussed. They are economic, large diameter, resistivity uniformity, control of carbon, and swirl defects.

  8. Vertical pump with free floating check valve

    DOEpatents

    Lindsay, Malcolm

    1980-01-01

    A vertical pump with a bottom discharge having a free floating check valve isposed in the outlet plenum thereof. The free floating check valve comprises a spherical member with a hemispherical cage-like member attached thereto which is capable of allowing forward or reverse flow under appropriate conditions while preventing reverse flow under inappropriate conditions.

  9. Whatever Floats Your Boat: A Design Challenge

    ERIC Educational Resources Information Center

    Kornoelje, Joanne; Roman, Harry T.

    2012-01-01

    This article presents a simple design challenge, based on the PBS program "Design Squad's" "Watercraft" activity that will prove engaging to most technology and engineering students. In this floating boat challenge, students are to build a boat that can float and support 25 pennies for at least 10 seconds--without leaking, sinking, or tipping…

  10. FPP1, A Floating Point Package for PDP-8 Computers.

    DTIC Science & Technology

    1983-08-01

    and the result left in FAC. LOG - 0007 The natural logarithm of FAC is calculated, and the result left in FAC. A negative or zero FAC causes a...lCS Aljb COPES ARE 11 v CAA’j ;EP.) STJPROT1TI\\’JFS I \\ CLITIEI) £ORF- -ARCT=0005 / XPT=R006 / LOG =PP󈨥 /(JIJTPT=PPI I /’ FATF=P P L CL(A T=0!1~ 1...4674 ,JMS I SEH IF, 5633 12P5 TAD EXP+5 5634 36611 DCA I SERSV 563 1P75 TAD LOG " 5636 7650 S’Q CLA 14AS AC VFGATTVE? 5637 4665 JMS I I.IVRT1 /YES

  11. New CFOA-based floating immittance emulators

    NASA Astrophysics Data System (ADS)

    Taher Abuelma'atti, Muhammad; Dhar, Sagar Kumar

    2016-12-01

    This paper presents four new topologies for emulating floating immittance functions. Each circuit uses two or three current-feedback operational-amplifiers (CFOAs) and three passive elements. The proposed topologies can emulate positive/negative lossless and lossy floating inductances, and positive/negative capacitance, resistance and inductance multipliers in addition to floating frequency-dependent positive and negative resistances. The functionality of the proposed circuits is verified using the Advanced Design System software and the AD844 CFOA. The simulation results are in excellent agreement with the theoretical calculations.

  12. Used float shoe recovered and tested

    SciTech Connect

    Colvard, R.L.

    1986-02-01

    A cement float valve has been recovered after it was circulated through and cemented downhole. It was retrieved by coring as part of an investigation into a cementing failure. The float equipment was then analyzed for downhole performance. This is believed to be the first instance of intact recovery of full-scale cementing hardware after it has been cemented in place. In this instance, the valve performed as designed. Flash set proved to be the probable cause of job failure. This article documents the job and includes photographs of the used float shoe and its components.

  13. 33 CFR 144.01-1 - Life floats.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 33 Navigation and Navigable Waters 2 2011-07-01 2011-07-01 false Life floats. 144.01-1 Section 144... CONTINENTAL SHELF ACTIVITIES LIFESAVING APPLIANCES Manned Platforms § 144.01-1 Life floats. Each manned platform shall be provided with at least two approved life floats. The life floats shall have...

  14. 33 CFR 144.01-1 - Life floats.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 33 Navigation and Navigable Waters 2 2012-07-01 2012-07-01 false Life floats. 144.01-1 Section 144... CONTINENTAL SHELF ACTIVITIES LIFESAVING APPLIANCES Manned Platforms § 144.01-1 Life floats. Each manned platform shall be provided with at least two approved life floats. The life floats shall have...

  15. 33 CFR 144.01-1 - Life floats.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 33 Navigation and Navigable Waters 2 2013-07-01 2013-07-01 false Life floats. 144.01-1 Section 144... CONTINENTAL SHELF ACTIVITIES LIFESAVING APPLIANCES Manned Platforms § 144.01-1 Life floats. Each manned platform shall be provided with at least two approved life floats. The life floats shall have...

  16. 33 CFR 144.01-1 - Life floats.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 33 Navigation and Navigable Waters 2 2014-07-01 2014-07-01 false Life floats. 144.01-1 Section 144... CONTINENTAL SHELF ACTIVITIES LIFESAVING APPLIANCES Manned Platforms § 144.01-1 Life floats. Each manned platform shall be provided with at least two approved life floats. The life floats shall have...

  17. 14 CFR 23.753 - Main float design.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Main float design. 23.753 Section 23.753... STANDARDS: NORMAL, UTILITY, ACROBATIC, AND COMMUTER CATEGORY AIRPLANES Design and Construction Floats and Hulls § 23.753 Main float design. Each seaplane main float must meet the requirements of § 23.521....

  18. 14 CFR 27.751 - Main float buoyancy.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Main float buoyancy. 27.751 Section 27.751... STANDARDS: NORMAL CATEGORY ROTORCRAFT Design and Construction Floats and Hulls § 27.751 Main float buoyancy. (a) For main floats, the buoyancy necessary to support the maximum weight of the rotorcraft in...

  19. 14 CFR 27.751 - Main float buoyancy.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Main float buoyancy. 27.751 Section 27.751... STANDARDS: NORMAL CATEGORY ROTORCRAFT Design and Construction Floats and Hulls § 27.751 Main float buoyancy. (a) For main floats, the buoyancy necessary to support the maximum weight of the rotorcraft in...

  20. 14 CFR 27.751 - Main float buoyancy.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Main float buoyancy. 27.751 Section 27.751... STANDARDS: NORMAL CATEGORY ROTORCRAFT Design and Construction Floats and Hulls § 27.751 Main float buoyancy. (a) For main floats, the buoyancy necessary to support the maximum weight of the rotorcraft in...

  1. 14 CFR 27.751 - Main float buoyancy.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Main float buoyancy. 27.751 Section 27.751... STANDARDS: NORMAL CATEGORY ROTORCRAFT Design and Construction Floats and Hulls § 27.751 Main float buoyancy. (a) For main floats, the buoyancy necessary to support the maximum weight of the rotorcraft in...

  2. 14 CFR 27.751 - Main float buoyancy.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Main float buoyancy. 27.751 Section 27.751... STANDARDS: NORMAL CATEGORY ROTORCRAFT Design and Construction Floats and Hulls § 27.751 Main float buoyancy. (a) For main floats, the buoyancy necessary to support the maximum weight of the rotorcraft in...

  3. 14 CFR 23.753 - Main float design.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Main float design. 23.753 Section 23.753... STANDARDS: NORMAL, UTILITY, ACROBATIC, AND COMMUTER CATEGORY AIRPLANES Design and Construction Floats and Hulls § 23.753 Main float design. Each seaplane main float must meet the requirements of § 23.521....

  4. Floating-gated memory based on carbon nanotube field-effect transistors with Si floating dots

    NASA Astrophysics Data System (ADS)

    Seike, Kohei; Fujii, Yusuke; Ohno, Yasuhide; Maehashi, Kenzo; Inoue, Koichi; Matsumoto, Kazuhiko

    2014-01-01

    We have fabricated a carbon nanotube field-effect transistor (CNTFET)-based nonvolatile memory device with Si floating dots. The electrical characteristics of this memory device were compared with those of devices with a HfO2 charge storage layer or Au floating dots. For a sweep width of 6 V, the memory window of the devices with the Si floating dots increased twofold as compared with that of the devices with the HfO2 layer. Moreover, the retention characteristics revealed that, for the device with the Au floating dots, the off-state had almost the same current as the on-state at the 400th s. However, the devices with the Si floating dots had longer-retention characteristics. The results indicate that CNTFET-based devices with Si floating dots are promising candidates for low-power consumption nonvolatile memory devices.

  5. Tests find hammering, fluid cutting, erosion cause float shoe failures

    SciTech Connect

    Stringfellow, B.

    1985-01-21

    The results of a systematic test program to evaluate float equipment performance are presented. The testing has destroyed, over an eightmonth period, 160 float valves, float shoes and float collars. A new float valve design with greater resistance to failure has been developed as a result of the testing. New float collars and float shoes are expected to provide the operator with a failure rate of less than 1 1/2% when used within design limits and under normal cementing conditions. Further testing objectives include: extension of operating temperature limits to include deep well and geothermal conditions, and evaluation of the effects of more abrasive mud and cement systems.

  6. Exploring Floating Concrete and Beam Design.

    ERIC Educational Resources Information Center

    Snell, Billie G.; Snell, Luke M.

    2002-01-01

    Presents two construction activities that address both state and federal science standards and encourage students to consider career options in mathematics and science. Includes floating concrete and paper bridge activities. (YDS)

  7. Floating patterns of metered dose inhalers.

    PubMed

    Wolf, B L; Cochran, K R

    1997-01-01

    As long as metered dose inhalers have existed, patients have sought a reliable method to determine if a given canister was still potent. Concerning beta agonists, the answer to this question may be lifesaving. Issues of compliance have made dating canisters or counting doses impractical. Likewise, previous claims of floating characteristics are unreliable. In tap water, we float-tested 13 commonly used inhalers three times each, observing variations as they were incrementally actuated, emptying their contents. One essential pattern was observed. Almost all prescription-size canisters sink when full; all float by the time one-third of their contents is gone. Orientation of prescription-size canisters changes in a distinct pattern especially near 90% depletion. Sample-size canisters showed some variance. Results suggest that the pharmaceutical industry should include individual floating characteristics as part of the package insert as they provide a reproducible means of gauging contents.

  8. Thumb polydactyly with a floating ulnar thumb.

    PubMed

    Hasegawa, Kenjiro; Namba, Yuzaburo; Kimata, Yoshihiro

    2013-01-01

    Thumb polydactyly is reported to be the most common congenital anomaly of the hand in Japan. The floating type is not particularly rare, accounting for 0.9 to 15% of all cases of thumb polydactyly. However, to the best of our knowledge, there has been only one case of thumb polydactyly with a floating ulnar thumb, reported by Onizuka. Herein, we report a case very similar to that reported by Onizuka. In our case, the vessels feeding the floating ulnar thumb branched from the superficial palmar arterial arch, and X-rays revealed triphalangism. In surgery, we not only reconstructed the morphology of the thumb, but also tried to preserve the sensation in the reconstructed thumb by transposing the digital nerve of the floating ulnar thumb to the radial thumb. In addition to thumb polydactyly, our case also showed hypoplasia of the thenar muscles.

  9. Preview of Mars Curiosity Parade Float

    NASA Video Gallery

    Jim Green, Director of the Science Mission Directorate Planetary Systems Division at NASA Headquarters, describes the replica of the Mars Curiosity Rover on the second NASA float in Monday's inaugu...

  10. Archimedes' floating bodies on a spherical Earth

    NASA Astrophysics Data System (ADS)

    Rorres, Chris

    2016-01-01

    Archimedes was the first to systematically find the centers of gravity of various solid bodies and to apply this concept in determining stable configurations of floating bodies. In this paper, we discuss an error in a proof developed by Archimedes that involves determining whether a uniform, spherical cap will float stably with its base horizontal in a liquid on a spherical Earth. We present a simpler, corrected proof and discuss aspects of his proof regarding a spherical cap that is not uniform.

  11. Multiple valued floating potentials of Langmuir probes

    NASA Technical Reports Server (NTRS)

    Nam, Cheol-Hee; Hershkowitz, N.; Cho, M. H.; Intrator, T.; Diebold, D.

    1988-01-01

    It is shown that Langmuir probes can have three different floating potentials in plasmas produced by a hot filament discharge in a multi-dipole device when the primary and secondary electron currents are comparable. The measured floating potential depends on the probe's initial condition - the most negative and the least negative potentials are found to be stable and the in-between value is found to be unstable. Results are compared to a simple theoretical model.

  12. Airship-floated wind turbine

    SciTech Connect

    Watson, W. K.

    1985-01-01

    A wind turbine, by use of a tethered airship for support, may be designed for the economical recovery of power at heights of 2,000 feet or more above ground, at which height power density in the wind is typically three times the power density available to a conventionally supported wind turbine. Means can be added to such an airship-floated wind turbine which will permit its generators to be used to meet load demand even during periods of little or no wind. Described to this end is a wind turbine system which combines, among other novel features: a novel tether line system which provides access for men and materials to the supporting airship while in active service, a novel system for providing additional buoyant lift at the nose of the turbine-supporting airship to offset the vertical component of tension induced in the tether line by the downwind force exerted by the turbine blades, a novel bearing assembly at the nose of the supporting airship which permits the airship to rotate as a unit with the turbine it supports without causing a similar rotation of the tether line, a novel turbine airship structure which handles concentrated loads from the turbine efficiently and also permits the safe use of hydrogen for buoyancy, a novel ''space frame'' structure which supports the turbine blades and greatly reduces blade weight, a novel system for controlling turbine blade angle of incidence and for varying blade incidene in synchrony with blade angular position abut the turbine axis to provide greater control over airship movement, a novel system for locating propellor-driven generators out at the wind turbine perimeter and for using lightweight, high-RPM generators to produce electrical energy at a power line frequency, which greatly reduces the weight required to convert turbine blade torque into useful power, and a novel system for incorporating compressed air storage and combustion turbine components into the wind turbine's generator drive systems.

  13. Resolution of ambiguous radar measurements using a floating bin correlator

    NASA Astrophysics Data System (ADS)

    Addison, E. R.; Frost, E. L.

    It is pointed out that the Chinese Remainder Theorem (Mooney and Skillman, 1970) can be used to yield unambiguous measurements by comparing outputs allocated to fixed integer number bins using integer arithmetic to modulo to the correct bin number. In general, targets straddling two or more bins or the assignment of an incorrect bin number will yield incorrect parameter values. An ambiguity resolution technique using multiple pulse repetition frequency (PRF) data and a sliding floating point window or 'floating bin' to correlate ambiguous centroided Doppler measurements is proposed. An advantage of the technique is that false targets are much less prevalent than in classical techniques. What is more, the same technique may be employed to resolve ambiguous range wherein centroided range measurements are moduloed with the pulse repetition interval associated with each PRF. Results demonstrate that this method is better than conventional approaches in that the number of false targets produced is significantly lower while simultaneoulsy providing a high probability of correlation. In addition, the correlation can be effected in real time.

  14. Floating seal system for rotary devices

    DOEpatents

    Banasiuk, Hubert A.

    1983-01-01

    This invention relates to a floating seal system for rotary devices to reduce gas leakage around the rotary device in a duct and across the face of the rotary device to an adjacent duct. The peripheral seal bodies are made of resilient material having a generally U-shaped cross section wherein one of the legs is secured to a support member and the other of the legs forms a contacting seal against the rotary device. The legs of the peripheral seal form an extended angle of intersection of about 10.degree. to about 30.degree. in the unloaded condition to provide even sealing forces around the periphery of the rotary device. The peripheral seal extends around the periphery of the support member except where intersected by radial seals which reduce gas leakage across the face of the rotary device and between adjacent duct portions. The radial seal assembly is fabricated from channel bars, the smaller channel bar being secured to the divider of the support member and a larger inverted rigid floating channel bar having its legs freely movable over the legs of the smaller channel bar forming therewith a tubular channel. A resilient flexible tube is positioned within the tubular channel for substantially its full length to reduce gas leakage across the tubular channel. A spacer extends beyond the face of the floating channel near each end of the floating channel a distance to provide desired clearance between the floating channel and the face of the rotary device.

  15. Battery charging in float vs. cycling environments

    SciTech Connect

    COREY,GARTH P.

    2000-04-20

    In lead-acid battery systems, cycling systems are often managed using float management strategies. There are many differences in battery management strategies for a float environment and battery management strategies for a cycling environment. To complicate matters further, in many cycling environments, such as off-grid domestic power systems, there is usually not an available charging source capable of efficiently equalizing a lead-acid battery let alone bring it to a full state of charge. Typically, rules for battery management which have worked quite well in a floating environment have been routinely applied to cycling batteries without full appreciation of what the cycling battery really needs to reach a full state of charge and to maintain a high state of health. For example, charge target voltages for batteries that are regularly deep cycled in off-grid power sources are the same as voltages applied to stand-by systems following a discharge event. In other charging operations equalization charge requirements are frequently ignored or incorrectly applied in cycled systems which frequently leads to premature capacity loss. The cause of this serious problem: the application of float battery management strategies to cycling battery systems. This paper describes the outcomes to be expected when managing cycling batteries with float strategies and discusses the techniques and benefits for the use of cycling battery management strategies.

  16. Floating seal system for rotary devices

    DOEpatents

    Banasiuk, H.A.

    1983-08-23

    This invention relates to a floating seal system for rotary devices to reduce gas leakage around the rotary device in a duct and across the face of the rotary device to an adjacent duct. The peripheral seal bodies are made of resilient material having a generally U-shaped cross section wherein one of the legs is secured to a support member and the other of the legs forms a contacting seal against the rotary device. The legs of the peripheral seal form an extended angle of intersection of about 10[degree] to about 30[degree] in the unloaded condition to provide even sealing forces around the periphery of the rotary device. The peripheral seal extends around the periphery of the support member except where intersected by radial seals which reduce gas leakage across the face of the rotary device and between adjacent duct portions. The radial seal assembly is fabricated from channel bars, the smaller channel bar being secured to the divider of the support member and a larger inverted rigid floating channel bar having its legs freely movable over the legs of the smaller channel bar forming therewith a tubular channel. A resilient flexible tube is positioned within the tubular channel for substantially its full length to reduce gas leakage across the tubular channel. A spacer extends beyond the face of the floating channel near each end of the floating channel a distance to provide desired clearance between the floating channel and the face of the rotary device. 5 figs.

  17. Floating mechanism of a small liquid marble

    PubMed Central

    Ooi, Chin Hong; Plackowski, Chris; Nguyen, Anh V.; Vadivelu, Raja K.; John, James A. St.; Dao, Dzung Viet; Nguyen, Nam-Trung

    2016-01-01

    Flotation of small solid objects and liquid droplets on water is critical to natural and industrial activities. This paper reports the floating mechanism of liquid marbles, or liquid droplets coated with hydrophobic microparticles. We used X-ray computed tomography (XCT) to acquire cross-sectional images of the floating liquid marble and interface between the different phases. We then analysed the shape of the liquid marble and the angles at the three-phase contact line (TPCL). We found that the small floating liquid marbles follow the mechanism governing the flotation of solid objects in terms of surface tension forces. However, the contact angles formed and deformation of the liquid marble resemble that of a sessile liquid droplet on a thin, elastic solid. For small liquid marbles, the contact angle varies with volume due to the deformability of the interface. PMID:26902930

  18. Floating zone melting of cadmium telluride

    NASA Technical Reports Server (NTRS)

    Chang, Wen-Ming; Regel, L. L.; Wilcox, W. R.

    1992-01-01

    To produce superior crystals of cadmium telluride, floating zone melting in space has been proposed. Techniques required for floating zone melting of cadmium telluride are being developed. We have successfully float-zoned cadmium telluride on earth using square rods. A resistance heater was constructed for forming the molten zone. Evaporation of the molten zone was controlled by adding excess cadmium to the growth ampoule combined with heating of the entire ampoule. An effective method to hold the feed rod was developed. Slow rotation of the growth ampoule was proven experimentally to be necessary to achieve a complete symmetric molten zone. Most of the resultant cylindrical rods were single crystals with twins. Still needed is a suitable automatic method to control the zone length. We tried a fiber optical technique to control the zone length, but experiments showed that application of this technique to automate zone length control is unlikely to be successful.

  19. Cephalometric floating norms for North American adults.

    PubMed

    Franchi, L; Baccetti, T; McNamara, J A

    1998-12-01

    Floating norms provide a method of analysis that uses the variability of the associations among suitable cephalometric measures, on the basis of a regression model combining both sagittal and vertical skeletal parameters. This study establishes floating norms for the description of the individual skeletal pattern in North American adults. The method is based on the correlations among the following craniofacial measurements: SNA, SNB, NL-NSL, ML-NSL, and NSBa. The results are given in a graphical box-like form. This easy, practical procedure allows for the identification of either individual harmonious craniofacial features or anomalous deviations from the individual norm. The use of cephalometric floating norms may be helpful for diagnosis and treatment planning in orthognathic surgery and dentofacial orthopedics.

  20. Development of hybrid fluid jet/float polishing process

    NASA Astrophysics Data System (ADS)

    Beaucamp, Anthony T. H.; Namba, Yoshiharu; Freeman, Richard R.

    2013-09-01

    On one hand, the "float polishing" process consists of a tin lap having many concentric grooves, cut from a flat by single point diamond turning. This lap is rotated above a hydrostatic bearing spindle of high rigidity, damping and rotational accuracy. The optical surface thus floats above a thin layer of abrasive particles. But whilst surface texture can be smoothed to ~0.1nm rms (as measured by atomic force microscopy), this process can only be used on flat surfaces. On the other hand, the CNC "fluid jet polishing" process consists of pumping a mixture of water and abrasive particles to a converging nozzle, thus generating a polishing spot that can be moved along a tool path with tight track spacing. But whilst tool path feed can be moderated to ultra-precisely correct form error on freeform optical surfaces, surface finish improvement is generally limited to ~1.5nm rms (with fine abrasives). This paper reports on the development of a novel finishing method, that combines the advantages of "fluid jet polishing" (i.e. freeform corrective capability) with "float polishing" (i.e. super-smooth surface finish of 0.1nm rms or less). To come up with this new "hybrid" method, computational fluid dynamic modeling of both processes in COMSOL is being used to characterize abrasion conditions and adapt the process parameters of experimental fluid jet polishing equipment, including: (1) geometrical shape of nozzle, (2) position relative to the surface, (3) control of inlet pressure. This new process is aimed at finishing of next generation X-Ray / Gamma Ray focusing optics.

  1. On the Assimilation of Argo Float Trajectories into the Mediterranean Forecasting System

    NASA Astrophysics Data System (ADS)

    Nilsson, Jenny A. U.; Dobricic, Srdjan; Taillandier, Vincent; Poulain, Pierre-Marie; Pinardi, Nadia

    2010-05-01

    availability of Argo-float data was noted during the period, with the maximum amount and spread of floats in 2005. The impact of the fall-off in float abundance was studied in terms of analyses, and implications on the operational activities will be pointed out.

  2. Hydrodynamic Tests of Models of Seaplane Floats

    NASA Technical Reports Server (NTRS)

    Eula, Antonio

    1935-01-01

    This report contains the results of tank tests carried out at free trim on seventeen hulls and floats of various types. The data as to the weight on water, trim, and relative resistance for each model are plotted nondimensionally and are referenced both to the total weight and to the weight on water. Despite the fact that the experiments were not made systematically, a study of the models and of the test data permits nevertheless some general deductions regarding the forms of floats and their resistance. One specific conclusion is that the best models have a maximum relative resistance not exceeding 20 percent of the total weight.

  3. Well casing float shoe or collar

    SciTech Connect

    Kaufman, H. J.

    1985-08-06

    A well casing float shoe which is adapted for a variety of well installations consists of a tubular metal shoe member filled with cementitious material having a longitudinal bore surrounding and securing in place a tubular metal sleeve. The metal sleeve is threaded at the top and bottom ends to receive a variety of sizes and types of check valves. A well casing float collar has the same construction, but the tubular shoe member is replaced with a tubular metal collar with threaded connections both above and below the cementitious filler material.

  4. 40 CFR 65.44 - External floating roof (EFR).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 15 2010-07-01 2010-07-01 false External floating roof (EFR). 65.44... (CONTINUED) CONSOLIDATED FEDERAL AIR RULE Storage Vessels § 65.44 External floating roof (EFR). (a) EFR... emissions by using an external floating roof shall comply with the design requirements listed in...

  5. 33 CFR 144.01-15 - Alternates for life floats.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 33 Navigation and Navigable Waters 2 2011-07-01 2011-07-01 false Alternates for life floats. 144... for life floats. (a) Approved lifeboats, approved life rafts or approved inflatable life rafts may be used in lieu of approved life floats for either all or part of the capacity required. When...

  6. 33 CFR 144.01-10 - Equipment for life floats.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 33 Navigation and Navigable Waters 2 2011-07-01 2011-07-01 false Equipment for life floats. 144.01... for life floats. (a) Each lifefloat shall be provided with a painter. This painter shall be a manila... 1/2 inch in diameter. (b) Each life float must have a water light of an approved automatic...

  7. 33 CFR 144.01-15 - Alternates for life floats.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 33 Navigation and Navigable Waters 2 2014-07-01 2014-07-01 false Alternates for life floats. 144... for life floats. (a) Approved lifeboats, approved life rafts or approved inflatable life rafts may be used in lieu of approved life floats for either all or part of the capacity required. When...

  8. 33 CFR 144.01-10 - Equipment for life floats.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 33 Navigation and Navigable Waters 2 2012-07-01 2012-07-01 false Equipment for life floats. 144.01... for life floats. (a) Each lifefloat shall be provided with a painter. This painter shall be a manila... 1/2 inch in diameter. (b) Each life float must have a water light of an approved automatic...

  9. 33 CFR 144.01-15 - Alternates for life floats.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 33 Navigation and Navigable Waters 2 2013-07-01 2013-07-01 false Alternates for life floats. 144... for life floats. (a) Approved lifeboats, approved life rafts or approved inflatable life rafts may be used in lieu of approved life floats for either all or part of the capacity required. When...

  10. 33 CFR 144.01-15 - Alternates for life floats.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 33 Navigation and Navigable Waters 2 2012-07-01 2012-07-01 false Alternates for life floats. 144... for life floats. (a) Approved lifeboats, approved life rafts or approved inflatable life rafts may be used in lieu of approved life floats for either all or part of the capacity required. When...

  11. 46 CFR 131.870 - Life floats and buoyant apparatus.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 4 2014-10-01 2014-10-01 false Life floats and buoyant apparatus. 131.870 Section 131... OPERATIONS Markings for Fire Equipment and Emergency Equipment § 131.870 Life floats and buoyant apparatus. (a) The name of the vessel must be plainly marked or painted on each life float or buoyant...

  12. 33 CFR 144.01-10 - Equipment for life floats.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 33 Navigation and Navigable Waters 2 2013-07-01 2013-07-01 false Equipment for life floats. 144.01... for life floats. (a) Each lifefloat shall be provided with a painter. This painter shall be a manila... 1/2 inch in diameter. (b) Each life float must have a water light of an approved automatic...

  13. 46 CFR 131.870 - Life floats and buoyant apparatus.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 4 2013-10-01 2013-10-01 false Life floats and buoyant apparatus. 131.870 Section 131... OPERATIONS Markings for Fire Equipment and Emergency Equipment § 131.870 Life floats and buoyant apparatus. (a) The name of the vessel must be plainly marked or painted on each life float or buoyant...

  14. 33 CFR 144.01-10 - Equipment for life floats.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 33 Navigation and Navigable Waters 2 2014-07-01 2014-07-01 false Equipment for life floats. 144.01... for life floats. (a) Each lifefloat shall be provided with a painter. This painter shall be a manila... 1/2 inch in diameter. (b) Each life float must have a water light of an approved automatic...

  15. 46 CFR 131.870 - Life floats and buoyant apparatus.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 4 2012-10-01 2012-10-01 false Life floats and buoyant apparatus. 131.870 Section 131... OPERATIONS Markings for Fire Equipment and Emergency Equipment § 131.870 Life floats and buoyant apparatus. (a) The name of the vessel must be plainly marked or painted on each life float or buoyant...

  16. 46 CFR 131.870 - Life floats and buoyant apparatus.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... OPERATIONS Markings for Fire Equipment and Emergency Equipment § 131.870 Life floats and buoyant apparatus. (a) The name of the vessel must be plainly marked or painted on each life float or buoyant apparatus... 46 Shipping 4 2011-10-01 2011-10-01 false Life floats and buoyant apparatus. 131.870 Section...

  17. 46 CFR 131.870 - Life floats and buoyant apparatus.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... OPERATIONS Markings for Fire Equipment and Emergency Equipment § 131.870 Life floats and buoyant apparatus. (a) The name of the vessel must be plainly marked or painted on each life float or buoyant apparatus... 46 Shipping 4 2010-10-01 2010-10-01 false Life floats and buoyant apparatus. 131.870 Section...

  18. Improving the performance of floating solar pool covers

    SciTech Connect

    Cole, M.A.; Lowrey, P. . Dept. of Mechanical Engineering)

    1992-11-01

    Experimental and analytical analyses are presented for the evaluation of heat transfer through floating solar swimming pool covers. Two improved floating solar swimming pool cover designs are proposed and investigated in this paper. The results conclusively show that both new cover designs should have significantly better performance than conventional floating solar swimming pool covers.

  19. 14 CFR 25.753 - Main float design.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Main float design. 25.753 Section 25.753 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY AIRPLANES Design and Construction Floats and Hulls § 25.753 Main float...

  20. 14 CFR 25.753 - Main float design.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Main float design. 25.753 Section 25.753 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY AIRPLANES Design and Construction Floats and Hulls § 25.753 Main float...

  1. 14 CFR 29.757 - Hull and auxiliary float strength.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Hull and auxiliary float strength. 29.757 Section 29.757 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION... § 29.757 Hull and auxiliary float strength. The hull, and auxiliary floats if used, must withstand...

  2. Design of crossed-mirror array to form floating 3D LED signs

    NASA Astrophysics Data System (ADS)

    Yamamoto, Hirotsugu; Bando, Hiroki; Kujime, Ryousuke; Suyama, Shiro

    2012-03-01

    3D representation of digital signage improves its significance and rapid notification of important points. Our goal is to realize floating 3D LED signs. The problem is there is no sufficient device to form floating 3D images from LEDs. LED lamp size is around 1 cm including wiring and substrates. Such large pitch increases display size and sometimes spoils image quality. The purpose of this paper is to develop optical device to meet the three requirements and to demonstrate floating 3D arrays of LEDs. We analytically investigate image formation by a crossed mirror structure with aerial aperture, called CMA (crossed-mirror array). CMA contains dihedral corner reflectors at each aperture. After double reflection, light rays emitted from an LED will converge into the corresponding image point. We have fabricated CMA for 3D array of LEDs. One CMA unit contains 20 x 20 apertures that are located diagonally. Floating image of LEDs was formed in wide range of incident angle. The image size of focused beam agreed to the apparent aperture size. When LEDs were located three-dimensionally (LEDs in three depths), the focused distances were the same as the distance between the real LED and the CMA.

  3. Flow-induced oscillations of a floating moored cylinder

    NASA Astrophysics Data System (ADS)

    Carlson, Daniel; Modarres-Sadeghi, Yahya

    2016-11-01

    An experimental study of flow-induced oscillations of a floating model spar buoy was conducted. The model spar consisted of a floating uniform cylinder moored in a water tunnel test section, and free to oscillate about its mooring attachment point near the center of mass. For the bare cylinder, counter-clockwise (CCW) figure-eight trajectories approaching A* =1 in amplitude were observed at the lower part of the spar for a reduced velocity range of U* =4-11, while its upper part experienced clockwise (CW) orbits. It was hypothesized that the portion of the spar undergoing CCW figure eights is the portion within which the flow excites the structure. By adding helical strakes to the portion of the cylinder with CCW figure eights, the response amplitude was significantly reduced, while adding strakes to portions with clockwise orbital motion had a minimal influence on the amplitude of response. This work is partially supported by the NSF-sponsored IGERT: Offshore Wind Energy Engineering, Environmental Science, and Policy (Grant Number 1068864).

  4. Unsteady aerodynamic analysis for offshore floating wind turbines under different wind conditions

    PubMed Central

    Xu, B. F.; Wang, T. G.; Yuan, Y.; Cao, J. F.

    2015-01-01

    A free-vortex wake (FVW) model is developed in this paper to analyse the unsteady aerodynamic performance of offshore floating wind turbines. A time-marching algorithm of third-order accuracy is applied in the FVW model. Owing to the complex floating platform motions, the blade inflow conditions and the positions of initial points of vortex filaments, which are different from the fixed wind turbine, are modified in the implemented model. A three-dimensional rotational effect model and a dynamic stall model are coupled into the FVW model to improve the aerodynamic performance prediction in the unsteady conditions. The effects of floating platform motions in the simulation model are validated by comparison between calculation and experiment for a small-scale rigid test wind turbine coupled with a floating tension leg platform (TLP). The dynamic inflow effect carried by the FVW method itself is confirmed and the results agree well with the experimental data of a pitching transient on another test turbine. Also, the flapping moment at the blade root in yaw on the same test turbine is calculated and compares well with the experimental data. Then, the aerodynamic performance is simulated in a yawed condition of steady wind and in an unyawed condition of turbulent wind, respectively, for a large-scale wind turbine coupled with the floating TLP motions, demonstrating obvious differences in rotor performance and blade loading from the fixed wind turbine. The non-dimensional magnitudes of loading changes due to the floating platform motions decrease from the blade root to the blade tip. PMID:25583859

  5. Unsteady aerodynamic analysis for offshore floating wind turbines under different wind conditions.

    PubMed

    Xu, B F; Wang, T G; Yuan, Y; Cao, J F

    2015-02-28

    A free-vortex wake (FVW) model is developed in this paper to analyse the unsteady aerodynamic performance of offshore floating wind turbines. A time-marching algorithm of third-order accuracy is applied in the FVW model. Owing to the complex floating platform motions, the blade inflow conditions and the positions of initial points of vortex filaments, which are different from the fixed wind turbine, are modified in the implemented model. A three-dimensional rotational effect model and a dynamic stall model are coupled into the FVW model to improve the aerodynamic performance prediction in the unsteady conditions. The effects of floating platform motions in the simulation model are validated by comparison between calculation and experiment for a small-scale rigid test wind turbine coupled with a floating tension leg platform (TLP). The dynamic inflow effect carried by the FVW method itself is confirmed and the results agree well with the experimental data of a pitching transient on another test turbine. Also, the flapping moment at the blade root in yaw on the same test turbine is calculated and compares well with the experimental data. Then, the aerodynamic performance is simulated in a yawed condition of steady wind and in an unyawed condition of turbulent wind, respectively, for a large-scale wind turbine coupled with the floating TLP motions, demonstrating obvious differences in rotor performance and blade loading from the fixed wind turbine. The non-dimensional magnitudes of loading changes due to the floating platform motions decrease from the blade root to the blade tip.

  6. Subtropical Productivity from Profiling Floats and Gliders

    NASA Astrophysics Data System (ADS)

    Nicholson, D. P.; Johnson, K. S.; Karl, D. M.

    2015-12-01

    Since 2007 profiling floats equipped with dissolved oxygen and nitrate sensors have been released from the Hawaii Ocean Time-series (HOT) and Bermuda Atlantic Time-series Study (BATS) sites and can be calibrated using time-series observations. More recent deployments have also included bio-optical and pH sensors. Gliders with oxygen sensors and bio-optics have been intermittently deployed near HOT Station ALOHA since 2008 and at BATS since 2014. While gliders maintain a restricted survey region near the time-series stations, profiling floats drifted widely across the subtropical gyres. Multiple floats and gliders enables a cotemporaneous comparison of biogeochemical processes across gyres. These platforms enable observations on spatial scales from submesoscale to basin scale and on temporal scales from diel to interannual. Here, I focus on the spatiotemporal variability of nitrate and oxygen mass balances in the North Pacific and North Atlantic subtropical gyres using a data-assimilating and float-tracking 1D upper ocean model.

  7. Dealing with Human Death: The Floating Perspective.

    ERIC Educational Resources Information Center

    Kenyon, Gary M.

    1991-01-01

    Explores approach to dealing with human death. Describes floating perspective, based on insights from Choron and Jaspers, as suggesting it is possible to deal with human death by refraining from taking ultimate position on the problem. Position encourages openness to death. Examines role of anxiety and describes possible meaningful outcomes of…

  8. Using Tensor Completion Method to Achieving Better Coverage of Traffic State Estimation from Sparse Floating Car Data

    PubMed Central

    Ran, Bin; Song, Li; Cheng, Yang; Tan, Huachun

    2016-01-01

    Traffic state estimation from the floating car system is a challenging problem. The low penetration rate and random distribution make available floating car samples usually cover part space and time points of the road networks. To obtain a wide range of traffic state from the floating car system, many methods have been proposed to estimate the traffic state for the uncovered links. However, these methods cannot provide traffic state of the entire road networks. In this paper, the traffic state estimation is transformed to solve a missing data imputation problem, and the tensor completion framework is proposed to estimate missing traffic state. A tensor is constructed to model traffic state in which observed entries are directly derived from floating car system and unobserved traffic states are modeled as missing entries of constructed tensor. The constructed traffic state tensor can represent spatial and temporal correlations of traffic data and encode the multi-way properties of traffic state. The advantage of the proposed approach is that it can fully mine and utilize the multi-dimensional inherent correlations of traffic state. We tested the proposed approach on a well calibrated simulation network. Experimental results demonstrated that the proposed approach yield reliable traffic state estimation from very sparse floating car data, particularly when dealing with the floating car penetration rate is below 1%. PMID:27448326

  9. Using Tensor Completion Method to Achieving Better Coverage of Traffic State Estimation from Sparse Floating Car Data.

    PubMed

    Ran, Bin; Song, Li; Zhang, Jian; Cheng, Yang; Tan, Huachun

    2016-01-01

    Traffic state estimation from the floating car system is a challenging problem. The low penetration rate and random distribution make available floating car samples usually cover part space and time points of the road networks. To obtain a wide range of traffic state from the floating car system, many methods have been proposed to estimate the traffic state for the uncovered links. However, these methods cannot provide traffic state of the entire road networks. In this paper, the traffic state estimation is transformed to solve a missing data imputation problem, and the tensor completion framework is proposed to estimate missing traffic state. A tensor is constructed to model traffic state in which observed entries are directly derived from floating car system and unobserved traffic states are modeled as missing entries of constructed tensor. The constructed traffic state tensor can represent spatial and temporal correlations of traffic data and encode the multi-way properties of traffic state. The advantage of the proposed approach is that it can fully mine and utilize the multi-dimensional inherent correlations of traffic state. We tested the proposed approach on a well calibrated simulation network. Experimental results demonstrated that the proposed approach yield reliable traffic state estimation from very sparse floating car data, particularly when dealing with the floating car penetration rate is below 1%.

  10. Quality of life associated with perceived stigma and discrimination among the floating population in Shanghai, China: a qualitative study.

    PubMed

    Wang, Ji-Wei; Cui, Zhi-Ting; Cui, Hong-Wei; Wei, Chang-Nian; Harada, Koichi; Minamoto, Keiko; Ueda, Kimiyo; Ingle, Kapilkumar N; Zhang, Cheng-Gang; Ueda, Atsushi

    2010-12-01

    The floating population refers to the large and increasing number of migrants without local household registration status and has become a new demographic phenomenon in China. Most of these migrants move from the rural areas of the central and western parts of China to the eastern and coastal metropolitan areas in pursuit of a better life. The floating population of China was composed of 121 million people in 2000, and this number was expected to increase to 300 million by 2010. Quality of life (QOL) studies of the floating population could provide a critical starting point for recognizing the potential of regions, cities and local communities to improve QOL. This study explored the construct of QOL of the floating population in Shanghai, China. We conducted eight focus groups with 58 members of the floating population (24 males and 34 females) and then performed a qualitative thematic analysis of the interviews. The following five QOL domains were identified from the analysis: personal development, jobs and career, family life, social relationships and social security. The results indicated that stigma and discrimination permeate these life domains and influence the framing of life expectations. Proposals were made for reducing stigma and discrimination against the floating population to improve the QOL of this population.

  11. Physical implication of transition voltage in organic nano-floating-gate nonvolatile memories

    NASA Astrophysics Data System (ADS)

    Wang, Shun; Gao, Xu; Zhong, Ya-Nan; Zhang, Zhong-Da; Xu, Jian-Long; Wang, Sui-Dong

    2016-07-01

    High-performance pentacene-based organic field-effect transistor nonvolatile memories, using polystyrene as a tunneling dielectric and Au nanoparticles as a nano-floating-gate, show parallelogram-like transfer characteristics with a featured transition point. The transition voltage at the transition point corresponds to a threshold electric field in the tunneling dielectric, over which stored electrons in the nano-floating-gate will start to leak out. The transition voltage can be modulated depending on the bias configuration and device structure. For p-type active layers, optimized transition voltage should be on the negative side of but close to the reading voltage, which can simultaneously achieve a high ON/OFF ratio and good memory retention.

  12. Floating behavior of hydrophobic glass spheres.

    PubMed

    Liu, Xinjie; Wang, Xiaolong; Liang, Yongmin; Zhou, Feng

    2009-08-15

    When a hydrophobic solid sphere is floating on water or salt solutions with different concentrations, it is at equilibrium under the impact of gravity, buoyancy force, and curvature force, the component of surface tension in the vertical direction. We have changed the diameters of the spheres and the concentrations of the two selected salts, NaCl and NaNO(3), to study the floating behaviors of these spheres and the contributions of surface tension and buoyancy force to their floatation. Generally speaking, the surface tension plays a more important role than the buoyancy force when the gravity is small, but the buoyancy force plays an identical or a more important role when the spheres are big enough. The wettability of the spheres significantly influences the height below the contact perimeter especially in salt solutions. The theoretical calculation meniscus slope angles at the sphere three-phase contact line are in agreement with experimental results.

  13. Capillary deposition of advected floating particles

    NASA Astrophysics Data System (ADS)

    Dressaire, Emilie; Debaisieux, Aymeric; Gregori, Federico

    2016-11-01

    The deposition and aggregation of particles flowing through a confined environment can dramatically hinder the transport of suspensions. Yet, the mechanisms responsible for the deposition of particles in shear flow are not fully understood. Here, we use an experimental model system in which floating particles are advected on the surface of a water channel and deposited on fixed obstacles through attractive capillary effects. By varying the flow rate of the liquid, the wetting properties and size of the particles and obstacles, we can tune the magnitude of the capillary and hydrodynamic forces that determine the probability of deposition and the equilibrium position on the substrate. We show that arrays of obstacles can be designed to efficiently capture the floating particles advected by the flow.

  14. Floating vs flying: A propulsion energy comparison

    NASA Technical Reports Server (NTRS)

    Marbury, F.

    1975-01-01

    Floating craft are compared to those that fly. Drag/weight for floaters is shown to be proportional to v squared/L, while for flyers it is independent of size and speed. The transportation market will therefore assign airships to lower speeds than airplanes, and will favor large airship sizes. Drag of an airship is shown to be only 11 percent of submarine drag at equal displacement and speed, raising the possibility that airships can compete with some types of ships.

  15. Ships as future floating farm systems?

    PubMed

    Moustafa, Khaled

    2016-09-29

    Environmental and agriculture challenges such as severe drought, desertification, sprawling cities and shrinking arable lands in large regions in the world compel us to think about alternative and sustainable farming systems. Ongoing projects to build floating cities in the sea suggest that building specific ships for farming purposes (as farming ships or farming boats) would also be attainable to introduce new farming surfaces and boost food production worldwide to cope with food insecurity issues.

  16. Floating gate transistors as biosensors (Conference Presentation)

    NASA Astrophysics Data System (ADS)

    Frisbie, C. Daniel

    2016-11-01

    Electrolyte gated transistors (EGTs) are a sub-class of thin film transistors that are extremely promising for biological sensing applications. These devices employ a solid electrolyte as the gate insulator; the very large capacitance of the electrolyte results in low voltage operation and high transconductance or gain. This talk will describe the fabrication of floating gate EGTs and their use as ricin sensors. The critical performance metrics for EGTs compared with other types of TFTs will also be reviewed.

  17. FPP [Floating Potential Probe] Results, Final Report

    NASA Technical Reports Server (NTRS)

    Ferguson, Dale C.

    2007-01-01

    The Floating Potential Probe (FPP) operated on the International Space Station (ISS) from December 2000 to April 2001. During that time, it took many measurements of the ISS floating potential and the electron density and temperature. Those measurements were used as inputs to the Environments WorkBench (EWB) model of ISS potentials (originally developed by SAIC, but now sometimes called the Boeing model) that is used even today to predict charging levels for ISS. FPP is now completely defunct, having been removed and ejected from ISS. With the advent of the new Floating Potential Monitoring Unit (FPMU) on ISS, and the beginning of ISS operations with two large solar array panels instead of just one, a review of FPP measurements can offer comparisons with the new FPMU data and perhaps improve the accuracy of future ISS charging predictions. In particular, FPP measurements during times of low electron temperature and high electron density (the times of worst ISS charging) will be brought forward for comparison with the newly obtained FPMU data.

  18. Floating debris in the Mediterranean Sea.

    PubMed

    Suaria, Giuseppe; Aliani, Stefano

    2014-09-15

    Results from the first large-scale survey of floating natural (NMD) and anthropogenic (AMD) debris (>2 cm) in the central and western part of the Mediterranean Sea are reported. Floating debris was found throughout the entire study area with densities ranging from 0 to 194.6 items/km(2) and mean abundances of 24.9 AMD items/km(2) and 6.9 NMD items/km(2) across all surveyed locations. On the whole, 78% of all sighted objects were of anthropogenic origin, 95.6% of which were petrochemical derivatives (i.e. plastic and styrofoam). Maximum AMD densities (>52 items/km(2)) were found in the Adriatic Sea and in the Algerian basin, while the lowest densities (<6.3 items/km(2)) were observed in the Central Tyrrhenian and in the Sicilian Sea. All the other areas had mean densities ranging from 10.9 to 30.7 items/km(2). According to our calculations, more than 62 million macro-litter items are currently floating on the surface of the whole Mediterranean basin.

  19. Borofloat and Starphire Float Glasses: A Comparison

    SciTech Connect

    Wereszczak, Andrew A.; Anderson Jr., Charles E.

    2014-10-28

    Borofloat® borosilicate float glass and Starphire® soda-lime silicate float glass are used in transparent protective systems. They are known to respond differently in some ballistic and triaxial loading conditions, and efforts are underway to understand the causes of those differences. Toward that, a suite of test and material characterizations were completed in the present study on both glasses so to identify what differences exist among them. Compositional, physical properties, elastic properties, flaw size distributions and concentrations, tensile/flexure strength, fracture toughness, spherical indentation and hardness, transmission electron microscopy, striae, high pressure responses via diamond anvil cell testing, laser shock differences, and internal porosity were examined. Differences between these two float glasses were identified for many of these properties and characteristics, and the role of three (striae, high pressures where permanent densification can initiate, and sub-micron-sized porosity) lack understanding and deserve further attention. Lastly, the contributing roles of any of those properties or characteristics to triaxial or ballistic loading responses are not definitive; however, they provide potential correlations that may lead to improved understanding and management of loading responses in glasses used in transparent protective systems.

  20. Borofloat and Starphire Float Glasses: A Comparison

    DOE PAGES

    Wereszczak, Andrew A.; Anderson Jr., Charles E.

    2014-10-28

    Borofloat® borosilicate float glass and Starphire® soda-lime silicate float glass are used in transparent protective systems. They are known to respond differently in some ballistic and triaxial loading conditions, and efforts are underway to understand the causes of those differences. Toward that, a suite of test and material characterizations were completed in the present study on both glasses so to identify what differences exist among them. Compositional, physical properties, elastic properties, flaw size distributions and concentrations, tensile/flexure strength, fracture toughness, spherical indentation and hardness, transmission electron microscopy, striae, high pressure responses via diamond anvil cell testing, laser shock differences, andmore » internal porosity were examined. Differences between these two float glasses were identified for many of these properties and characteristics, and the role of three (striae, high pressures where permanent densification can initiate, and sub-micron-sized porosity) lack understanding and deserve further attention. Lastly, the contributing roles of any of those properties or characteristics to triaxial or ballistic loading responses are not definitive; however, they provide potential correlations that may lead to improved understanding and management of loading responses in glasses used in transparent protective systems.« less

  1. Floating sample-collection platform with stage-activated automatic water sampler for streams with large variation in stage

    USGS Publications Warehouse

    Tarte, Stephen R.; Schmidt, A.R.; Sullivan, Daniel J.

    1992-01-01

    A floating sample-collection platform is described for stream sites where the vertical or horizontal distance between the stream-sampling point and a safe location for the sampler exceed the suction head of the sampler. The platform allows continuous water sampling over the entire storm-runoff hydrogrpah. The platform was developed for a site in southern Illinois.

  2. Floating Oil-Spill Containment Device

    NASA Technical Reports Server (NTRS)

    Jones, Jack A.

    2012-01-01

    Previous oil containment booms have an open top that allows natural gas to escape, and have significant oil leakage due to wave action. Also, a subsea pyramid oil trap exists, but cannot move relative to moving oil plumes from deepsea oil leaks. The solution is to have large, moveable oil traps. One version floats on the sea surface and has a flexible tarp cover and a lower weighted skirt to completely entrap the floating oil and natural gas. The device must have at least three sides with boats pulling at each apex, and sonar or other system to track the slowly moving oil plume, so that the boats can properly locate the booms. The oil trap device must also have a means for removal of the oil and the natural gas. A second design version has a flexible pyramid cover that is attached by lines to ballast on the ocean floor. This is similar to fixed, metal pyramid oil capture devices in the Santa Barbara Channel off the coast of California. The ballast lines for the improved design, however, would have winches that can move the pyramid to always be located above the oil and gas plume. A third design is a combination of the first two. It uses a submerged pyramid to trap oil, but has no anchor and uses boats to locate the trap. It has ballast weights located along the bottom of the tarp and/or at the corners of the trap. The improved floating oil-spill containment device has a large floating boom and weighted skirt surrounding the oil and gas entrapment area. The device is triangular (or more than three sides) and has a flexible tarp cover with a raised gas vent area. Boats pull on the apex of the triangles to maintain tension and to allow the device to move to optimum locations to trap oil and gas. The gas is retrieved from a higher buoyant part of the tarp, and oil is retrieved from the floating oil layer contained in the device. These devices can be operated in relatively severe weather, since waves will break over the devices without causing oil leaking. Also, natural

  3. Electron Temperature Measurement by Floating Probe Method Using AC Voltage

    NASA Astrophysics Data System (ADS)

    Satoshi, Nodomi; Shuichi, Sato; Mikio, Ohuchi

    2016-11-01

    This study presents a novel floating probe method to measure electron temperatures using a hollow cathode-type discharge tube. The proposed method detects a shift in the floating potential when an AC voltage is applied to a probe through an intermediary blocking capacitor. The shift in the floating potential is described as a function of the electron temperature and the applied AC voltage. The floating probe method is simpler than the Langmuir probe method because it does not require the measurement of volt-ampere characteristics. As the input AC voltage increases, the electron temperature converges. The electron temperature measured using the floating probe method with an applied sinusoidal voltage shows a value close to the first (tail) electron temperature in the range of the floating potential.

  4. Tank Tests of Two Floats for High-speed Seaplanes

    NASA Technical Reports Server (NTRS)

    Bell, Joe W

    1933-01-01

    At the request of the Bureau of Aeronautics, Navy Department, a study of the design of floats especially suitable for use on high-speed seaplanes was undertaken in the N.A.C.A. tank. This note give the results obtained in tests of one-quarter full-size models of two floats for high-speed seaplanes. One was a float similar to that used on the Macchi high-speed seaplane which competed in the 1926 Schneider Trophy races, and the other a float designed at the N.A.C.A. tank in an attempt to improve on the water performance of the Macchi float. The model of the latter showed considerably better water performance than the model of the Macchi float.

  5. When chromatin organisation floats astray: the Srcap gene and Floating-Harbor syndrome.

    PubMed

    Messina, Giovanni; Atterrato, Maria Teresa; Dimitri, Patrizio

    2016-12-01

    Floating-Harbor syndrome (FHS) is a rare human disease characterised by delayed bone mineralisation and growth deficiency, often associated with mental retardation and skeletal and craniofacial abnormalities. FHS was first described at Boston's Floating Hospital 42 years ago, but the causative gene, called Srcap, was identified only recently. Truncated SRCAP protein variants have been implicated in the mechanism of FHS, but the molecular bases underlying the disease must still be elucidated and investigating the molecular defects leading to the onset of FHS remains a challenge. Here we comprehensively review recent work and provide alterative hypotheses to explain how the Srcap truncating mutations lead to the onset of FHS.

  6. An Analysis of the Full-Floating Journal Bearing

    NASA Technical Reports Server (NTRS)

    Shaw, M C; Nussdorfer, T J , Jr

    1947-01-01

    An analysis of the operating characteristics of a full-floating journal bearing, a bearing in which a floating sleeve is located between the journal and bearing surfaces, is presented together with charts from which the performance of such bearings may be predicted. Examples are presented to illustrate the use of these charts and a limited number of experiments conducted upon a glass full-floating bearing are reported to verify some results of the analysis.

  7. Surface Drift of RAFOS Floats in the California Current System

    NASA Astrophysics Data System (ADS)

    Gates, D. C.; Collins, C. A.; Margolina, T.

    2011-12-01

    The patterns of surface drift of ninety RAFOS floats in the California Current System have been studied. The floats were launched in the California Undercurrent during 1992-2010 and were tracked by the ARGOS system when they surfaced at the end of their subsurface mission. The float hulls were glass cylinders which were 8.6 cm wide by 1.52 m long and floated with the upper 30 cm of the hull above water. The surface drift of these floats was typically equatorward in the California Current. However, some floats would flow poleward, others would drift westward into the North Pacific Gyre, and others with orbital cyclonic and/or anti-cyclonic motions. The duration of surface trajectories varied from as short as a period of days to approximately ten months. Forces on the floats included wind stress on the exposed hull and the drag of ocean currents on the subsurface hull. The latter included the Stokes drift associated with surface wind waves, Ekman flow caused by the stress of the wind on the ocean surface, and the currents associated with the general circulation of the ocean. Surface currents can be explained by calculating current direction and velocity from wind stress data. As a first step, the relationship between observed wind stress and the motion of the float is determined by assuming Ekman balance. Mesoscale effects, including eddies, are also considered in explaining the surface drift of the floats.

  8. Localized buckling of a floating elastica.

    PubMed

    Audoly, B

    2011-07-01

    We study the buckling of a two-dimensional elastica floating on a bath of dense fluid, subjected to axial compression. The sinusoidal pattern predicted by the analysis of linear stability is shown to become localized above the buckling threshold. A nonlinear amplitude equation is derived for the envelope of the pattern. These results provide a simple interpretation to the wrinkle-to-fold transition reported by Pocivavsek et al. [Science 320, 912 (2008)]. An analogy with the classical problem of the localized buckling of a strut on a nonlinear elastic foundation is presented.

  9. Research effort aims at floating production technology

    SciTech Connect

    Not Available

    1992-08-17

    This paper reports that a 3 year research and development program on floating production systems (FPS), instigated by the Royal Norwegian Council for Scientific and Industrial Research (NTNF), has refined and qualified technologies for North Sea and arctic conditions. The FPS 2000 program, which cost 58 million kroner ($10 million), concentrated mainly on mooring systems and pipeline technology, along with new system concepts and cost reduction measures. More than 30 projects have been completed within the scheme. The anchoring and positioning project concentrates on developing methods for simulating behavior of mooring systems for large volume structures in deep water. It also seeks ways to determine efficiency of dynamic positioning thrusters under extreme conditions.

  10. Floating hydrometer with energy dissipating baffle

    SciTech Connect

    Kownurko, W.A.

    1987-11-24

    This patent describes a floating hydrometer employable for purposes of obtaining measurements of the presence of suspended solids in a fluid substance contained in a receptacle comprising: a. a probe portion operative as an instrument-bearing housing; b. an elongated tubular element having a hollow interior and at least one open end so as to enable the flow into the hollow interior of the elongated tubular element through the open end; and c. energy dissipating baffle means having a first mode of action and a second mode of action and including a member having a hollow interior.

  11. Density tracers give option to float

    SciTech Connect

    Davis, J.J.; Wood, C.J.; Lyman, G.J.

    1986-05-01

    Density tracers, that is, particles of precisely known specific gravities, offer alternative to the float-sink technique for determining separation densities. Usually made of plastic and dosed with heavy metal salts to obtain the desired specific gravity, the tracers are added to the separator feed, collected by hand from the product and reject streams, and sorted into appropriate increments on the basis of color-coding or other markings. After counting, the partition number for each specific gravity is calculated and the circuit partition or tromp curve drawn.

  12. Floating air riding seal for a turbine

    SciTech Connect

    Ebert, Todd A

    2016-08-16

    A floating air riding seal for a gas turbine engine with a rotor and a stator, an annular piston chamber with an axial moveable annular piston assembly within the annular piston chamber formed in the stator, an annular cavity formed on the annular piston assembly that faces a seal surface on the rotor, where the axial moveable annular piston includes an inlet scoop on a side opposite to the annular cavity that scoops up the swirling cooling air and directs the cooling air to the annular cavity to form an air cushion with the seal surface of the rotor.

  13. 40 CFR 63.1043 - Standards-Separator floating roof.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...) National Emission Standards for Oil-Water Separators and Organic-Water Separators § 63.1043 Standards... controlling air emissions from an oil-water separator or organic-water separator using a floating roof. (b... floating roof shall be equipped with two continuous seals, one above the other, between the wall of...

  14. 22. Float located adjacent to entry stair in filtration bed. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    22. Float located adjacent to entry stair in filtration bed. The float actuates a valve that maintains water level over the bed. - Lake Whitney Water Filtration Plant, Filtration Plant, South side of Armory Street between Edgehill Road & Whitney Avenue, Hamden, New Haven County, CT

  15. 33 CFR 143.120 - Floating OCS facilities.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Floating OCS facilities. 143.120 Section 143.120 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OUTER CONTINENTAL SHELF ACTIVITIES DESIGN AND EQUIPMENT OCS Facilities § 143.120 Floating OCS...

  16. 33 CFR 144.01-1 - Life floats.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Life floats. 144.01-1 Section 144.01-1 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OUTER CONTINENTAL SHELF ACTIVITIES LIFESAVING APPLIANCES Manned Platforms § 144.01-1 Life floats. Each...

  17. 14 CFR 23.535 - Auxiliary float loads.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... AIRWORTHINESS STANDARDS: NORMAL, UTILITY, ACROBATIC, AND COMMUTER CATEGORY AIRPLANES Structure Water Loads § 23.535 Auxiliary float loads. (a) General. Auxiliary floats and their attachments and supporting structures must be designed for the conditions prescribed in this section. In the cases specified...

  18. 14 CFR 23.535 - Auxiliary float loads.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... AIRWORTHINESS STANDARDS: NORMAL, UTILITY, ACROBATIC, AND COMMUTER CATEGORY AIRPLANES Structure Water Loads § 23.535 Auxiliary float loads. (a) General. Auxiliary floats and their attachments and supporting structures must be designed for the conditions prescribed in this section. In the cases specified...

  19. 14 CFR 23.535 - Auxiliary float loads.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... AIRWORTHINESS STANDARDS: NORMAL, UTILITY, ACROBATIC, AND COMMUTER CATEGORY AIRPLANES Structure Water Loads § 23.535 Auxiliary float loads. (a) General. Auxiliary floats and their attachments and supporting structures must be designed for the conditions prescribed in this section. In the cases specified...

  20. 14 CFR 23.535 - Auxiliary float loads.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... AIRWORTHINESS STANDARDS: NORMAL, UTILITY, ACROBATIC, AND COMMUTER CATEGORY AIRPLANES Structure Water Loads § 23.535 Auxiliary float loads. (a) General. Auxiliary floats and their attachments and supporting structures must be designed for the conditions prescribed in this section. In the cases specified...

  1. 14 CFR 23.535 - Auxiliary float loads.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... AIRWORTHINESS STANDARDS: NORMAL, UTILITY, ACROBATIC, AND COMMUTER CATEGORY AIRPLANES Structure Water Loads § 23.535 Auxiliary float loads. (a) General. Auxiliary floats and their attachments and supporting structures must be designed for the conditions prescribed in this section. In the cases specified...

  2. 14 CFR 29.751 - Main float buoyancy.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Main float buoyancy. 29.751 Section 29.751 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS... buoyancy. (a) For main floats, the buoyancy necessary to support the maximum weight of the rotorcraft...

  3. 14 CFR 25.751 - Main float buoyancy.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Main float buoyancy. 25.751 Section 25.751 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS... buoyancy. Each main float must have— (a) A buoyancy of 80 percent in excess of that required to support...

  4. 14 CFR 25.751 - Main float buoyancy.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Main float buoyancy. 25.751 Section 25.751 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS... buoyancy. Each main float must have— (a) A buoyancy of 80 percent in excess of that required to support...

  5. 14 CFR 29.751 - Main float buoyancy.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Main float buoyancy. 29.751 Section 29.751 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS... buoyancy. (a) For main floats, the buoyancy necessary to support the maximum weight of the rotorcraft...

  6. 14 CFR 29.751 - Main float buoyancy.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Main float buoyancy. 29.751 Section 29.751 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS... buoyancy. (a) For main floats, the buoyancy necessary to support the maximum weight of the rotorcraft...

  7. 14 CFR 29.751 - Main float buoyancy.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Main float buoyancy. 29.751 Section 29.751 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS... buoyancy. (a) For main floats, the buoyancy necessary to support the maximum weight of the rotorcraft...

  8. 14 CFR 29.751 - Main float buoyancy.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Main float buoyancy. 29.751 Section 29.751 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS... buoyancy. (a) For main floats, the buoyancy necessary to support the maximum weight of the rotorcraft...

  9. 14 CFR 25.751 - Main float buoyancy.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Main float buoyancy. 25.751 Section 25.751 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS... buoyancy. Each main float must have— (a) A buoyancy of 80 percent in excess of that required to support...

  10. 14 CFR 25.751 - Main float buoyancy.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Main float buoyancy. 25.751 Section 25.751 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS... buoyancy. Each main float must have— (a) A buoyancy of 80 percent in excess of that required to support...

  11. 14 CFR 25.751 - Main float buoyancy.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Main float buoyancy. 25.751 Section 25.751 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS... buoyancy. Each main float must have— (a) A buoyancy of 80 percent in excess of that required to support...

  12. Evaporation mitigation using floating modular devices

    NASA Astrophysics Data System (ADS)

    Hassan, M. Mahmudul; Peirson, William Leslie; Neyland, Bryce M.; Fiddis, Nicholas McQuistan

    2015-11-01

    Reducing evaporation losses from open water storages is of paramount importance in the improvement of water security in arid countries, including Australia. Widespread adoption of evaporation mitigation techniques has been prevented by their high capital and maintenance or operating costs. The use of clean, floating recycled materials to mitigate evaporation technique has been investigated systematically at sites within both the coastal and semi-arid zones of Australia. Evaporation reduction systematically increases with the proportion of covered surface. Evaporation is reduced by 43% at coastal site and 37% at arid zone site at the maximum packing densities achievable for a single layer of floating devices. The study highlights the importance of both long-term investigations and the climatic influences in the robust quantification of evaporation mitigation. The effects of solar radiation, temperature, wind speed and relative humidity on the evaporation rate at both study sites have been determined in terms of both the classical Penman model and FAO Penman Monteith model with corresponding pan coefficients quantified. FAO Penman Monteith model better estimates evaporation from the open reference tank.

  13. Evaporation mitigation by floating modular devices

    NASA Astrophysics Data System (ADS)

    Hassan, M. M.; Peirson, W. L.

    2016-05-01

    Prolonged periods of drought and consequent evaporation from open water bodies in arid parts of Australia continue to be a threat to water availability for agricultural production. Over many parts of Australia, the annual average evaporation exceeds the annual precipitation by more than 5 times. Given its significance, it is surprising that no evaporation mitigation technique has gained widespread adoption to date. High capital and maintenance costs of manufactured products are a significant barrier to implementation. The use of directly recycled clean plastic containers as floating modular devices to mitigate evaporation has been investigated for the first time. A six-month trial at an arid zone site in Australia of this potential cost effective solution has been undertaken. The experiment was performed using clean conventional drinking water bottles as floating modules on the open water surface of 240-L tanks with three varying degrees of covering (nil, 34% and 68%). A systematic reduction in evaporation is demonstrated during the whole study period that is approximately linearly proportional to the covered surface. These results provide a potential foundation for robust evaporation mitigation with the prospect of implementing a cost-optimal design.

  14. Water-Pressure Distribution on Seaplane Float

    NASA Technical Reports Server (NTRS)

    Thompson, F L

    1929-01-01

    The investigation presented in this report was conducted for the purpose of determining the distribution and magnitude of water pressures likely to be experienced on seaplane hulls in service. It consisted of the development and construction of apparatus for recording water pressures lasting one one-hundredth second or longer and of flight tests to determine the water pressures on a UO-1 seaplane float under various conditions of taxiing, taking off, and landing. The apparatus developed was found to operate with satisfactory accuracy and is suitable for flight tests on other seaplanes. The tests on the UO-1 showed that maximum pressures of about 6.5 pounds per square inch occur at the step for the full width of the float bottom. Proceeding forward from the step the maximum pressures decrease in magnitude uniformly toward the bow, and the region of highest pressures narrows toward the keel. Immediately abaft the step the maximum pressures are very small, but increase in magnitude toward the stern and there once reached a value of about 5 pounds per square inch. (author)

  15. A laboratory study of floating lenticular anticyclones

    NASA Astrophysics Data System (ADS)

    Le Gal, Patrice; de La Rosa, Hector; Cros, Anne; Cruz-Gomez, Raúl; Le Bars, Michael

    2014-11-01

    Oceanic vortices play an important role in the redistribution of heat, salt and momentum in the oceans. Among these vortices, floating lenses or rings are often met in the meanders of warm currents. For instance the North Brazil Current rings are among the most intense and large anticyclonic vortices on Earth. In order to better describe these vortices, we propose here a laboratory study of these floating anticyclonic lenses. A blob of fresh water is slowly injected near the surface of a rotating layer of homogeneous salted water. Because of the opposite effects of rotation that tends to generate columnar structures and density stratification that spreads light water on the surface, the vortices take a finite size three dimensionnal typical shape. Visualization and PIV measurements of the shape, aspect ratios and vorticity profiles are compared to analytical predictions that use first a simple solid body rotation model and then a more realistic isolated Gaussian vorticity field inside the anticyclones. This work was carried out within the framework of a bilateral cooperation between CNRS (France) and CONACYT (Mexico).

  16. Suppression of Marangoni Convection in Float Zones

    NASA Technical Reports Server (NTRS)

    Dressler, R. F.

    1985-01-01

    The basic purpose of this program is to demonstrate by means of an Earth-based 1-g experiment that the undesirable Marangoni (surface tension) convection can be suppressed or significantly reduced by means of gas jets directed tangentially to the free surface of the liquid in a float zone. These jets will establish the tangential shear stress field over the surface which must be adjusted to equal the counter-stress resultant of the Marangoni shear stress which causes the convection. For proposed materials processing in space (o-g), particularly of important, highly reactive semiconductor materials, e.g., silicon, microgravity will virtually eliminate the unwanted thermal-buoyancy convection in the liquid silicon, but will have no effect in reducing the Marangoni convection. Unless this can be sufficiently suppressed by other means, there may be no significant advantages to the proposed space processing of reactive semiconductors. Although some inert gas such as argon must be used for the corrosive liquid silicon, the Earth-based experiment uses air jets and various transparent oils, since the basic principle involved is the same. The first float zone is enclosed in a very small rectangular box with a quasi-planar free surface. Stable Marangoni convection has been achieved and velocities measured photographically. The air jet system with variable velocity and temperature is under construction. Three independent parameters must be optimized to attain maximum suppression: the gas velocity, angle of attack, and gas temperature.

  17. Hydroelastic responses of pontoon type very large floating offshore structure

    SciTech Connect

    Haeda, Hisaaki; Miyajima, Shyogo; Masuda, Koich; Ikoma, Tomoki

    1996-12-31

    The authors developed the estimating method of the hydroelastic response of a very large pontoon type floating structure. In this method, the pressure distribution method with shallow draft assumption was used to obtain the hydrodynamic forces considering the elastic motion of a floating body. The elastic responses of very large floating structure were estimated by using 1-D beam modeling. On the other hand, to observe the elastic response of a large pontoon type structure they carried out experiments in head sea and head-beam sea conditions. The experimental model was an elastic model of pontoon type large floating body. To validate numerical estimation method the authors compared the numerical results with experimental results. From these results, they found good agreement and confirmed the accuracy of this numerical estimation method of the hydroelasticity of a very large pontoon type floating structure.

  18. Floating production systems in a ``new economic regime``

    SciTech Connect

    Eriksen, K.; D`Souza, R.B.; Wilson, A.J.S.; Johansson, O.

    1995-12-31

    Except for a short period before, during and after the Gulf War, the oil prices have been depressed for 8--10 years. This has forced industry to be profitable at these low oil price levels. Since 1975 various floating production systems have been evaluated and used as field development solutions around the world. As technical challenges have been overcome, floating production systems have become leading contenders for traditional and deepwater field developments in this new economic regime. There are many types of Floating production systems. A few examples are--the semisubmersible Floating Production System (FPS), the monohull Floating Production, Storage and Offloading system (FPSO), the Spar Buoy and the Deep Draft Floater. As the FPS and FPSO represent proven technology and are leading contenders for several field developments in both the North Sea and the Gulf of Mexico, this paper will concentrate on these concepts.

  19. A Simple X-Ray Focusing Mirror Using Float Glass

    SciTech Connect

    Yin, Z; Berman, L.; Siddons, D.P.; Dierker, S; Dufresne, E.

    1996-10-01

    In our recent x-ray photon correlation spectroscopy (speckle) experiments at NSLS, one of the challenges is to increase the coherent photon flux through a pinhole, whose size is chosen to match the beam`s horizontal transverse coherence length {ital l{sub h}}. We adopted an approach to vertically focus the x-ray beam so as to match its vertical transverse coherence length {ital l{sub v}}, (at NSLS X13, {ital l{sub v}}{approximately} 50{ital l{sub h}}, {ital l{sub h}}{approximately} 12 {mu}m at 3 KeV) with {ital l{sub h}}. By demagnifying the vertical size by a factor of {ital l{sub v}/l{sub h}}, we expect to increase the intensity of the x-rays through the pin hole by the same factor while keeping the beam coherent. A piece of commercial 3/8 inch thick float glass, by virtue of its low surface roughness ({approximately}3{Angstrom} rms), good reflectivity in the low photon energy range of interest and low cost, was chosen as the mirror material. A computer controlled motorized bender with a four point bending mechanism was designed and built to bend the float glass to a continuously variable radius of curvature from {approximately}700 m (intrinsic curvature of the glass surface) to < 300 m, measured with the Long Trace Profiler at the BNL Metrology Lab. This mirror bender assembly allows us to continuously change the focal length of the x-ray mirror down to 0.5 m under our experimental conditions. At the NSLS X13 Prototype Small Gap Undulator (PSGU) beamline, we were able to focus the x-ray beam from a vertical size of 0.5 mm to {approximately} 25{mu}m at the focal point 54 cm from the mirror center, thus increasing the photon flux density by a factor of 20. Results also show that, as expected, at an incident angle of 9 mrad, the mirror cuts off the harmonics of the undulator spectrum, leaving a clean 3 KeV fundamental for our experiments.

  20. Hardware Implementation of 32-Bit High-Speed Direct Digital Frequency Synthesizer

    PubMed Central

    Ibrahim, Salah Hasan; Ali, Sawal Hamid Md.; Islam, Md. Shabiul

    2014-01-01

    The design and implementation of a high-speed direct digital frequency synthesizer are presented. A modified Brent-Kung parallel adder is combined with pipelining technique to improve the speed of the system. A gated clock technique is proposed to reduce the number of registers in the phase accumulator design. The quarter wave symmetry technique is used to store only one quarter of the sine wave. The ROM lookup table (LUT) is partitioned into three 4-bit sub-ROMs based on angular decomposition technique and trigonometric identity. Exploiting the advantages of sine-cosine symmetrical attributes together with XOR logic gates, one sub-ROM block can be removed from the design. These techniques, compressed the ROM into 368 bits. The ROM compressed ratio is 534.2 : 1, with only two adders, two multipliers, and XOR-gates with high frequency resolution of 0.029 Hz. These techniques make the direct digital frequency synthesizer an attractive candidate for wireless communication applications. PMID:24991635

  1. Basic mathematical function libraries for scientific computation

    NASA Technical Reports Server (NTRS)

    Galant, David C.

    1989-01-01

    Ada packages implementing selected mathematical functions for the support of scientific and engineering applications were written. The packages provide the Ada programmer with the mathematical function support found in the languages Pascal and FORTRAN as well as an extended precision arithmetic and a complete complex arithmetic. The algorithms used are fully described and analyzed. Implementation assumes that the Ada type FLOAT objects fully conform to the IEEE 754-1985 standard for single binary floating-point arithmetic, and that INTEGER objects are 32-bit entities. Codes for the Ada packages are included as appendixes.

  2. Discrete Element Modelling of Floating Debris

    NASA Astrophysics Data System (ADS)

    Mahaffey, Samantha; Liang, Qiuhua; Parkin, Geoff; Large, Andy; Rouainia, Mohamed

    2016-04-01

    Flash flooding is characterised by high velocity flows which impact vulnerable catchments with little warning time and as such, result in complex flow dynamics which are difficult to replicate through modelling. The impacts of flash flooding can be made yet more severe by the transport of both natural and anthropogenic debris, ranging from tree trunks to vehicles, wheelie bins and even storage containers, the effects of which have been clearly evident during recent UK flooding. This cargo of debris can have wide reaching effects and result in actual flood impacts which diverge from those predicted. A build-up of debris may lead to partial channel blockage and potential flow rerouting through urban centres. Build-up at bridges and river structures also leads to increased hydraulic loading which may result in damage and possible structural failure. Predicting the impacts of debris transport; however, is difficult as conventional hydrodynamic modelling schemes do not intrinsically include floating debris within their calculations. Subsequently a new tool has been developed using an emerging approach, which incorporates debris transport through the coupling of two existing modelling techniques. A 1D hydrodynamic modelling scheme has here been coupled with a 2D discrete element scheme to form a new modelling tool which predicts the motion and flow-interaction of floating debris. Hydraulic forces arising from flow around the object are applied to instigate its motion. Likewise, an equivalent opposing force is applied to fluid cells, enabling backwater effects to be simulated. Shock capturing capabilities make the tool applicable to predicting the complex flow dynamics associated with flash flooding. The modelling scheme has been applied to experimental case studies where cylindrical wooden dowels are transported by a dam-break wave. These case studies enable validation of the tool's shock capturing capabilities and the coupling technique applied between the two numerical

  3. Analysis of Static Spacecraft Floating Potential at Low Earth Orbit (LEO)

    NASA Technical Reports Server (NTRS)

    Herr, Joel L.; Hwang, K. S.; Wu, S. T.

    1995-01-01

    Spacecraft floating potential is the charge on the external surfaces of orbiting spacecraft relative to the space. Charging is caused by unequal negative and positive currents to spacecraft surfaces. The charging process continues until the accelerated particles can be collected rapidly enough to balance the currents at which point the spacecraft has reached its equilibrium or floating potential. In low inclination. Low Earth Orbit (LEO), the collection of positive ion and negative electrons. in a particular direction. are typically not equal. The level of charging required for equilibrium to be established is influenced by the characteristics of the ambient plasma environment. by the spacecraft motion, and by the geometry of the spacecraft. Using the kinetic theory, a statistical approach for studying the interaction is developed. The approach used to study the spacecraft floating potential depends on which phenomena are being applied. and on the properties of the plasma. especially the density and temperature. The results from kinetic theory derivation are applied to determine the charging level and the electric potential distribution at an infinite flat plate perpendicular to a streaming plasma using finite-difference scheme.

  4. Clustering of floating particles in stratified turbulence

    NASA Astrophysics Data System (ADS)

    Boffetta, Guido; de Lillo, Filippo; Musacchio, Stefano; Sozza, Alessandro

    2016-11-01

    We study the dynamics of small floating particles transported by stratified turbulence in presence of a mean linear density profile as a simple model for the confinement and the accumulation of plankton in the ocean. By means of extensive direct numerical simulations we investigate the statistical distribution of floaters as a function of the two dimensionless parameters of the problem. We find that vertical confinement of particles is mainly ruled by the degree of stratification, with a weak dependency on the particle properties. Conversely, small scale fractal clustering, typical of non-neutral particles in turbulence, depends on the particle relaxation time and is only weakly dependent on the flow stratification. The implications of our findings for the formation of thin phytoplankton layers are discussed.

  5. Nuclear Security for Floating Nuclear Power Plants

    SciTech Connect

    Skiba, James M.; Scherer, Carolynn P.

    2015-10-13

    Recently there has been a lot of interest in small modular reactors. A specific type of these small modular reactors (SMR,) are marine based power plants called floating nuclear power plants (FNPP). These FNPPs are typically built by countries with extensive knowledge of nuclear energy, such as Russia, France, China and the US. These FNPPs are built in one country and then sent to countries in need of power and/or seawater desalination. Fifteen countries have expressed interest in acquiring such power stations. Some designs for such power stations are briefly summarized. Several different avenues for cooperation in FNPP technology are proposed, including IAEA nuclear security (i.e. safeguards), multilateral or bilateral agreements, and working with Russian design that incorporates nuclear safeguards for IAEA inspections in non-nuclear weapons states

  6. Bipolar dislocation of the forearm (floating forearm).

    PubMed

    Aşkar, Hüseyin; Ertürk, Cemil; Altay, Mehmet Akif; Akif Altay, Mehmet; Bilge, Ali

    2014-01-01

    Bipolar dislocation of the forearm (floating forearm) is an unusual injury and is therefore often overlooked. We report a 28-year-old male patient who presented at another center with a history of a fall while climbing a tree. The patient's left elbow was treated with closed reduction and immobilization with a long-arm cast brace due to elbow dislocation. However, the patient was admitted with pain and swelling of the wrist to our emergency department the following day. Physical and radiological examination revealed dorsal trans-scaphoid perilunate dislocation. A dorsal incision was performed for open reduction and internal fixation to provide wide surgical exposure. Concomitant occurrence of elbow dislocation and fracture-dislocation of the perilunate is infrequent. Therefore, physicians should be aware of possible additional injuries and current recommended treatment methods.

  7. Active floating micro electrode arrays (AFMA).

    PubMed

    Kim, T; Troyk, P R; Bak, M

    2006-01-01

    Neuroscientists have widely used metal microelectrodes inserted into the cortex to record neural signals from, and provide electrical stimulation to, neural tissue for many years. Recently, the demand for implanting electrode arrays within the cortex, for both stimulation and recording, has rapidly increased. We are developing Active-floating-micro-electrode-arrays (AFMA) that are intended for use as a multielectrode cortical interface while minimizing the number of wires leading from the array to extra-dural circuitry or connectors. When combined with a wireless module, these new microelectrode arrays should allow for simulation and recording within free-roaming animals. This paper mainly discusses the design, fabrication, and packing of the first generation AFMA. Our long-term vision is a wireless-transmission electrode system, for stimulation and recording in free-roaming animals, which uses a family of modular active implantable electrode arrays.

  8. Fresh look at floating shock fitting

    NASA Technical Reports Server (NTRS)

    Hartwich, PETER-M.

    1990-01-01

    A fast implicit upwind procedure for the two-dimensional Euler equations is described that allows accurate computations of shocked flows on nonadapted meshes. Away from shocks, the second-order accurate upwinding is based on the split-coefficient-matrix (SCM) method. In the presence of shocks, the difference stencils are modified using a floating shock fitting technique. Rapid convergence to steady-state solutions is attained with a diagonalized approximate factorization (AF) algorithm. Results are presented for Riemann's problem, for a regular shock reflection at an inviscid wall, for supersonic flow past a cylinder, and for a transonic airfoil. All computed shocks are ideally sharp and in excellent agreement with other numerical results or 'exact' solutions. Most importantly, this has been accomplished on unusually crude meshes without any attempt to align grid lines with shock fronts or to cluster grid lines around shocks.

  9. Potential of water surface-floating microalgae for biodiesel production: Floating-biomass and lipid productivities.

    PubMed

    Muto, Masaki; Nojima, Daisuke; Yue, Liang; Kanehara, Hideyuki; Naruse, Hideaki; Ujiro, Asuka; Yoshino, Tomoko; Matsunaga, Tadashi; Tanaka, Tsuyoshi

    2017-03-01

    Microalgae have been accepted as a promising feedstock for biodiesel production owing to their capability of converting solar energy into lipids through photosynthesis. However, the high capital and operating costs, and high energy consumption, are hampering commercialization of microalgal biodiesel. In this study, the surface-floating microalga, strain AVFF007 (tentatively identified as Botryosphaerella sudetica), which naturally forms a biofilm on surfaces, was characterized for use in biodiesel production. The biofilm could be conveniently harvested from the surface of the water by adsorbing onto a polyethylene film. The lipid productivity of strain AVFF007 was 46.3 mg/L/day, allowing direct comparison to lipid productivities of other microalgal species. The moisture content of the surface-floating biomass was 86.0 ± 1.2%, which was much lower than that of the biomass harvested using centrifugation. These results reveal the potential of this surface-floating microalgal species as a biodiesel producer, employing a novel biomass harvesting and dewatering strategy.

  10. WindWaveFloat (WWF): Final Scientific Report

    SciTech Connect

    Alla Weinstein; Roddier, Dominique; Banister, Kevin

    2012-03-30

    Principle Power Inc. and National Renewable Energy Lab (NREL) have completed a contract to assess the technical and economic feasibility of integrating wave energy converters into the WindFloat, resulting in a new concept called the WindWaveFloat (WWF). The concentration of several devices on one platform could offer a potential for both economic and operational advantages. Wind and wave energy converters can share the electrical cable and power transfer equipment to transport the electricity to shore. Access to multiple generation devices could be simplified, resulting in cost saving at the operational level. Overall capital costs may also be reduced, provided that the design of the foundation can be adapted to multiple devices with minimum modifications. Finally, the WindWaveFloat confers the ability to increase energy production from individual floating support structures, potentially leading to a reduction in levelized energy costs, an increase in the overall capacity factor, and greater stability of the electrical power delivered to the grid. The research conducted under this grant investigated the integration of several wave energy device types into the WindFloat platform. Several of the resulting system designs demonstrated technical feasibility, but the size and design constraints of the wave energy converters (technical and economic) make the WindWaveFloat concept economically unfeasible at this time. Not enough additional generation could be produced to make the additional expense associated with wave energy conversion integration into the WindFloat worthwhile.

  11. Floating of Black Holes in Dimension of Information

    NASA Astrophysics Data System (ADS)

    Gholibeigian, Hassan; Gholibeigian, Ghasem; Gholibeigian, Kazem

    2016-10-01

    In our vision, there is dimension of information in addition of space-time's dimensions as the fifth dimension of the universe. All of the space-time, mater, and dark mater/energy are always floating in this dimension and whispering to its communication as well as black holes. Communication of information (CI) is done with each fundamental particle (string) from fifth dimension via its four animated sub-particles (sub-strings) for transferring a package of complete information of its quantum state in a Planck time. Fundamental particle after process of information by its sub-particles goes to its next stage while carries the stored processed information. CI as the ``fundamental symmetry'' leads all processes of the black holes as well as other phenomena. Every point of space-time needs on time to its new package, because duration of each processing is a Planck time. So, stored soft super-translation hairs in terms of soft gravitons or photons on black hole's horizon, or stored information on a holographic plate at the future boundary of the horizon [Hawking et al.] can be only accessible for particles which are in those positions (horizon and its boundary), not for other locations of black hole for their fast processing. AmirKabir University of Technology, Tehran, Iran.

  12. Road Network Generalization Based on Float CAR Tracking

    NASA Astrophysics Data System (ADS)

    Zhou, Cheng; Li, Wenjing; Jia, Hongguo

    2016-06-01

    Road generalization is not only helpful to simplify complicated road networks but can also satisfy the needs of reasonable display of roads under varying scales, thus offering basis for updating and grading urban roads. This paper proposes a selection method for road network generalization by integrating road-associated vehicle trajectory dynamic properties and road features and calculating the importance of urban roads. First of all, the location and motion information of floating vehicles are associated to relevant roads to generate the dynamic properties of roads. Then, the dynamic and static properties of roads are analyzed, and the cluster analysis is conducted to the trajectory points at road intersections to obtain the importance of some road intersections there are vehicles passing by. Afterwards, the weights of roads are calculated using the dominance rough set, the roads are ranked by weight and the practical significance of ranking results is analyzed. Finally, the selection rules for the basic framework of road network are determined to meet with different requirements and guarantee both connectivity and completeness of road networks. The results show that the relative importance of roads is made clear by taking advantage of the rough set and the generalized road network highlights the distribution and connection of urban main roads.

  13. Float level switch for a nuclear power plant containment vessel

    DOEpatents

    Powell, James G.

    1993-01-01

    This invention is a float level switch used to sense rise or drop in water level in a containment vessel of a nuclear power plant during a loss of coolant accident. The essential components of the device are a guide tube, a reed switch inside the guide tube, a float containing a magnetic portion that activates a reed switch, and metal-sheathed, ceramic-insulated conductors connecting the reed switch to a monitoring system outside the containment vessel. Special materials and special sealing techniques prevent failure of components and allow the float level switch to be connected to a monitoring system outside the containment vessel.

  14. A floating gate MOSFET dosimeter requiring no external bias supply

    SciTech Connect

    Tarr, N.G.; Mackay, G.F.; Thomson, I.; Shortt, K.

    1998-06-01

    MOSFET dosimeters incorporating an electrically floating polysilicon gate have been fabricated in a commercial CMOS technology. Charge is placed on the floating gate by tunneling from a small overlapping injector gate. Subsequent irradiation partially discharges the floating gate, producing a change in threshold voltage which can be used to infer the absorbed dose. No external power source is required during this sensing period. Sensitivities up to 70 mVGy{sup {minus}1} (0.7 mV/rad) have been obtained for temperature-compensated matched-pair dosimeters under {sup 60}Co gamma irradiation.

  15. Radiation Issues and Applications of Floating Gate Memories

    NASA Technical Reports Server (NTRS)

    Scheick, L. Z.; Nguyen, D. N.

    2000-01-01

    The radiation effects that affect various systems that comprise floating gate memories are presented. The wear-out degradation results of unirradiated flash memories are compared to irradiated flash memories. The procedure analyzes the failure to write and erase caused by wear-out and degradation of internal charge pump circuits. A method is described for characterizing the radiation effects of the floating gate itself. The rate dependence, stopping power dependence, SEU susceptibility and applications of floating gate in radiation environment are presented. The ramifications for dosimetry and cell failure are discussed as well as for the long term use aspects of non-volatile memories.

  16. Float level switch for a nuclear power plant containment vessel

    DOEpatents

    Powell, J.G.

    1993-11-16

    This invention is a float level switch used to sense rise or drop in water level in a containment vessel of a nuclear power plant during a loss of coolant accident. The essential components of the device are a guide tube, a reed switch inside the guide tube, a float containing a magnetic portion that activates a reed switch, and metal-sheathed, ceramic-insulated conductors connecting the reed switch to a monitoring system outside the containment vessel. Special materials and special sealing techniques prevent failure of components and allow the float level switch to be connected to a monitoring system outside the containment vessel. 1 figures.

  17. Floating potential measurements in plasmas: From dust to spacecraft

    NASA Astrophysics Data System (ADS)

    Beadles, R.; Wang, X.; Horányi, M.

    2017-02-01

    We present measurements of the floating potential of spherical probes, used as a model of a dust particle or a spacecraft, immersed in plasmas with a wide range of Debye lengths. Our experimental results verified the theoretical prediction that the probe floating potential is a function of the Debye length. It is shown that, in an argon plasma with the ion to electron temperature ratio ˜0.01, the magnitude of the floating potential is approximately doubled when the Debye length is changed from larger to smaller than the radius of the probe.

  18. Strongly Emitting Surfaces Unable to Float below Plasma Potential

    DOE PAGES

    Campanell, M. D.; Umansky, M. V.

    2016-02-25

    One important unresolved question in plasma physics concerns the effect of strong electron emission on plasma-surface interactions. Previous papers reported solutions with negative and positive floating potentials relative to the plasma edge. For these two models a very different predictions for particle and energy balance is given. Here we show that the positive potential state is the only possible equilibrium in general. Even if a negative floating potential existed at t=0, the ionization collisions near the surface will force a transition to the positive floating potential state. Moreover, this transition is demonstrated with a new simulation code.

  19. 46 CFR 160.027-3 - Additional requirements for life floats.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 6 2011-10-01 2011-10-01 false Additional requirements for life floats. 160.027-3..., CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Life Floats for Merchant Vessels § 160.027-3 Additional requirements for life floats. (a) Each life float must have a platform...

  20. libvaxdata: VAX data format conversion routines

    USGS Publications Warehouse

    Baker, Lawrence M.

    2005-01-01

    libvaxdata provides a collection of routines for converting numeric data-integer and floating-point-to and from the formats used on a Digital Equipment Corporation1 (DEC) VAX 32-bit minicomputer (Brunner, 1991). Since the VAX numeric data formats are inherited from those used on a DEC PDP-11 16-bit minicomputer, these routines can be used to convert PDP-11 data as well. VAX numeric data formats are also the default data formats used on DEC Alpha 64-bit minicomputers running OpenVMS The libvaxdata routines are callable from Fortran or C. They require that the caller use two's-complement format for integer data and IEEE 754 format (ANSI/IEEE, 1985) for floating-point data. They also require that the 'natural' size of a C int type (integer) is 32 bits. That is the case for most modern 32-bit and 64-bit computer systems. Nevertheless, you may wish to consult the Fortran or C compiler documentation on your system to be sure. Some Fortran compilers support conversion of VAX numeric data on-the-fly when reading or writing unformatted files, either as a compiler option or a run-time I/O option. This feature may be easier to use than the libvaxdata routines. Consult the Fortran compiler documentation on your system to determine if this alternative is available to you. 1Later Compaq Computer Corporation, now Hewlett-Packard Company

  1. Multifractal analysis of managed and independent float exchange rates

    NASA Astrophysics Data System (ADS)

    Stošić, Darko; Stošić, Dusan; Stošić, Tatijana; Stanley, H. Eugene

    2015-06-01

    We investigate multifractal properties of daily price changes in currency rates using the multifractal detrended fluctuation analysis (MF-DFA). We analyze managed and independent floating currency rates in eight countries, and determine the changes in multifractal spectrum when transitioning between the two regimes. We find that after the transition from managed to independent float regime the changes in multifractal spectrum (position of maximum and width) indicate an increase in market efficiency. The observed changes are more pronounced for developed countries that have a well established trading market. After shuffling the series, we find that the multifractality is due to both probability density function and long term correlations for managed float regime, while for independent float regime multifractality is in most cases caused by broad probability density function.

  2. CANVAS FINISH TO REMOVE FLOAT MARKS. View is to the ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    CANVAS FINISH TO REMOVE FLOAT MARKS. View is to the northwest of deck finishing operations - South Fork Trinity River Bridge, State Highway 299 spanning South Fork Trinity River, Salyer, Trinity County, CA

  3. 16. EAST ELEVATION OF FLOAT HOUSE AND FISH WATER RELEASE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    16. EAST ELEVATION OF FLOAT HOUSE AND FISH WATER RELEASE OUTLET. PART OF ENERGY DISSIPATING BAFFLE PIER SYSTEM IS VISIBLE AT LEFT. - Pit 4 Diversion Dam, Pit River west of State Highway 89, Big Bend, Shasta County, CA

  4. 50. (no plate) Lens, lens pedestal, mercury float, drawing # ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    50. (no plate) Lens, lens pedestal, mercury float, drawing # 3101, sheet 1 of 2. Approved April 6, 1928. - Block Island Southeast Light, Spring Street & Mohegan Trail at Mohegan Bluffs, New Shoreham, Washington County, RI

  5. 51. (no plate) Lens, lens pedestal, mercury float, shade holder ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    51. (no plate) Lens, lens pedestal, mercury float, shade holder installation, drawing # 3101, sheet 2 of 2. Approved April 6, 1928. - Block Island Southeast Light, Spring Street & Mohegan Trail at Mohegan Bluffs, New Shoreham, Washington County, RI

  6. 26. Mechanical float gages used to monitor level of water ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    26. Mechanical float gages used to monitor level of water in the filtration bed reservoir. - Lake Whitney Water Filtration Plant, Filtration Plant, South side of Armory Street between Edgehill Road & Whitney Avenue, Hamden, New Haven County, CT

  7. High voltage switches having one or more floating conductor layers

    SciTech Connect

    Werne, Roger W.; Sampayan, Stephen; Harris, John Richardson

    2015-11-24

    This patent document discloses high voltage switches that include one or more electrically floating conductor layers that are isolated from one another in the dielectric medium between the top and bottom switch electrodes. The presence of the one or more electrically floating conductor layers between the top and bottom switch electrodes allow the dielectric medium between the top and bottom switch electrodes to exhibit a higher breakdown voltage than the breakdown voltage when the one or more electrically floating conductor layers are not present between the top and bottom switch electrodes. This increased breakdown voltage in the presence of one or more electrically floating conductor layers in a dielectric medium enables the switch to supply a higher voltage for various high voltage circuits and electric systems.

  8. UFO in the Left Atrium: How to Capture Metal Debris Floating in the Left Atrium.

    PubMed

    Fassini, Gaetano; Moltrasio, Massimo; Conti, Sergio; Biagioli, Viviana; Tondo, Claudio

    2016-06-01

    Electrophysiology procedures involving left atrium navigation are becoming more frequent, mostly due to the increase of atrial fibrillation ablation. Mapping catheters of different shapes and size as well as dedicated sheaths are mandatory tools for the accomplishment of procedural end point. Therefore, technical issues are expected, usually unrelated to significant risk. However, any accidental intra-atrial device loss of integrity implies a risk of cerebrovascular embolization. The lack of clear evidence on how to manage these events and the need for a quick solution complicate the scenario. We report an empirical solution in the case of debris floating in the left atrium.

  9. The anatomy of floating shock fitting. [shock waves computation for flow field

    NASA Technical Reports Server (NTRS)

    Salas, M. D.

    1975-01-01

    The floating shock fitting technique is examined. Second-order difference formulas are developed for the computation of discontinuities. A procedure is developed to compute mesh points that are crossed by discontinuities. The technique is applied to the calculation of internal two-dimensional flows with arbitrary number of shock waves and contact surfaces. A new procedure, based on the coalescence of characteristics, is developed to detect the formation of shock waves. Results are presented to validate and demonstrate the versatility of the technique.

  10. Highly anomalous accumulation rates of C and N recorded by a relic, free-floating peatland in Central Italy.

    PubMed

    Zaccone, Claudio; Lobianco, Daniela; Shotyk, William; Ciavatta, Claudio; Appleby, Peter G; Brugiapaglia, Elisabetta; Casella, Laura; Miano, Teodoro M; D'Orazio, Valeria

    2017-02-23

    Floating islands mysteriously moving around on lakes were described by several Latin authors almost two millennia ago. These fascinating ecosystems, known as free-floating mires, have been extensively investigated from ecological, hydrological and management points of view, but there have been no detailed studies of their rates of accumulation of organic matter (OM), organic carbon (OC) and total nitrogen (TN). We have collected a peat core 4 m long from the free-floating island of Posta Fibreno, a relic mire in Central Italy. This is the thickest accumulation of peat ever found in a free-floating mire, yet it has formed during the past seven centuries and represents the greatest accumulation rates, at both decadal and centennial timescale, of OM (0.63 vs. 0.37 kg/m(2)/yr), OC (0.28 vs. 0.18 kg/m(2)/yr) and TN (3.7 vs. 6.1 g/m(2)/yr) ever reported for coeval peatlands. The anomalously high accretion rates, obtained using (14)C age dating, were confirmed using (210)Pb and (137)Cs: these show that the top 2 m of Sphagnum-peat has accumulated in only ~100 years. As an environmental archive, Posta Fibreno offers a temporal resolution which is 10x greater than any terrestrial peat bog, and promises to provide new insight into environmental changes occurring during the Anthropocene.

  11. Highly anomalous accumulation rates of C and N recorded by a relic, free-floating peatland in Central Italy

    PubMed Central

    Zaccone, Claudio; Lobianco, Daniela; Shotyk, William; Ciavatta, Claudio; Appleby, Peter G.; Brugiapaglia, Elisabetta; Casella, Laura; Miano, Teodoro M.; D’Orazio, Valeria

    2017-01-01

    Floating islands mysteriously moving around on lakes were described by several Latin authors almost two millennia ago. These fascinating ecosystems, known as free-floating mires, have been extensively investigated from ecological, hydrological and management points of view, but there have been no detailed studies of their rates of accumulation of organic matter (OM), organic carbon (OC) and total nitrogen (TN). We have collected a peat core 4 m long from the free-floating island of Posta Fibreno, a relic mire in Central Italy. This is the thickest accumulation of peat ever found in a free-floating mire, yet it has formed during the past seven centuries and represents the greatest accumulation rates, at both decadal and centennial timescale, of OM (0.63 vs. 0.37 kg/m2/yr), OC (0.28 vs. 0.18 kg/m2/yr) and TN (3.7 vs. 6.1 g/m2/yr) ever reported for coeval peatlands. The anomalously high accretion rates, obtained using 14C age dating, were confirmed using 210Pb and 137Cs: these show that the top 2 m of Sphagnum-peat has accumulated in only ~100 years. As an environmental archive, Posta Fibreno offers a temporal resolution which is 10x greater than any terrestrial peat bog, and promises to provide new insight into environmental changes occurring during the Anthropocene. PMID:28230066

  12. Crystal Growth in Liquid-Encapsulated Float Zone

    NASA Technical Reports Server (NTRS)

    Naumann, Robert J.; Frazier, Donald O.; Lehoczky, Sandor; Vlasse, Marcus; Facemire, Barbara

    1987-01-01

    Suitably chosen liquid encapsulant placed around melt zone in float-zone crystal-growth system performs four important functions enhancing purity and reducing strains and dislocations in final crystal. In new technique, grow dislocation-free crystals with precisely controlled composition even from materials not amenable to conventional float-zone crystal-growth method. Support provided by encapsulant make it practical to process materials of low surface tension.

  13. Comparative evaluation of single and bilayered lamotrigine floating tablets

    PubMed Central

    Lakshmi, PK; Sridhar, M; Shruthi, B

    2013-01-01

    Aim: The purpose of this study was to prepare lamotrigine (LM) bilayered and single layered floating tablets and to compare their release profiles. Materials and Methods: LM floating tablets were prepared by direct compression method. Drug, hydroxy propyl methyl cellulose K4M, lactose monohydrate and polyvinylpyrrolidone K30 constitute controlled release layer components and floating layer components includes polymers and sodium bicarbonate. The prepared tablets were evaluated for physicochemical parameters such as hardness, friability, weight variation, thickness, floating lag time (FLT), floating time, in vitro buoyancy study, in vitro release studies. The drug-polymer interaction was studied by fourier transform infrared and differential scanning calorimetry. Results and Discussion: The FLT of all the formulations were within the prescribed limits (<3 min). When ethyl cellulose was used as floating layer component, tablets showed good buoyancy effect but eroded within 6-8 h. Hence it was replaced with hydroxypropyl cellulose -M hydrophilic polymer, which showed good FLT and floating duration for 16 h. Formulation LFC4 was found to be optimized with dissolution profile of zero order kinetics showing fickian diffusion. A comparative study of bilayered and single layered tablets of LM showed a highest similarity factor of 83.03, difference factor of 2.74 and t-test (P < 0.05) indicates that there is no significant difference between them. Conclusion: Though bilayered tablet possess many advantages, single layered tablet would be economical, cost-effective and reproducible for large scale production in the industry. However, the results of present study demonstrated that the in vitro development of bilayered gastro retentive floating tablets with controlled drug release profile for LM is feasible. PMID:24167788

  14. Evaluation of floating impeller phenomena in a Gyro centrifugal pump.

    PubMed

    Nishimura, Ikuya; Ichikawa, S; Mikami, M; Ishitoya, H; Motomura, T; Kawamura, M; Linneweber, J; Glueck, J; Shinohara, T; Nosé, Y

    2013-01-01

    The Gyro centrifugal pump developed as a totally implantable artificial heart was designed with a free impeller, in which the rotational shaft (male bearing) of the impeller was completely separated from the female bearing. For this type of pump, it is very important to keep the proper magnet balance (impeller-magnet and actuator-magnet) in order to prevent thrombus formation and/or bearing wear. When the magnet balance is not proper, the impeller is jerked down into the bottom bearing. On the other hand, if magnet balance is proper, the impeller lifted off the bottom of the pump housing within a certain range of pumping conditions. In this study, this floating phenomenon was investigated in detail. The floating phenomenon was proved by observation of the impeller behavior using a transparent acrylic pump. The impeller floating phenomenon was mapped on a pump performance curve. The impeller floating phenomenon is affected by the magnet-magnet coupling distance and rotational speed of the impeller. In order to keep the proper magnet balance and to maintain the impeller floating phenomenon at the driving condition of right and left pump, the magnet-magnet coupling distance was altered by a spacer which was installed between the pump and actuator. It became clear that the same pump could handle different conditions (right and left ventricular assist), by just changing the thickness of the spacer. When magnet balance is proper, the floating impeller phenomenon occurs automatically in response to the impeller rev. It is called "the dynamic RPM suspension".

  15. DIFMOS - A floating-gate electrically erasable nonvolatile semiconductor memory technology. [Dual Injector Floating-gate MOS

    NASA Technical Reports Server (NTRS)

    Gosney, W. M.

    1977-01-01

    Electrically alterable read-only memories (EAROM's) or reprogrammable read-only memories (RPROM's) can be fabricated using a single-level metal-gate p-channel MOS technology with all conventional processing steps. Given the acronym DIFMOS for dual-injector floating-gate MOS, this technology utilizes the floating-gate technique for nonvolatile storage of data. Avalanche injection of hot electrons through gate oxide from a special injector diode in each bit is used to charge the floating gates. A second injector structure included in each bit permits discharge of the floating gate by avalanche injection of holes through gate oxide. The overall design of the DIFMOS bit is dictated by the physical considerations required for each of the avalanche injector types. The end result is a circuit technology which can provide fully decoded bit-erasable EAROM-type circuits using conventional manufacturing techniques.

  16. Traumatic Floating Clavicle- A case report

    PubMed Central

    Sopu, Alexandra; Green, Connor; Molony, Diarmuid

    2015-01-01

    Introduction: Shoulder injuries after high velocity trauma are common. Clavicle is affected in almost half of these cases. Even so, bipolar dislocation of the clavicle is an unusual injury and seldom reported in the literature. Conservative management is used for almost all the cases and only selected cases will undergo surgical treatment. Case Report: A 52 year old right electrician presented to the emergency department following a fall from a push bicycle. Plain radiographs identified a left first metacarpal (MC) fracture and a bipolar fracture of his right clavicle. Following Fracture Clinic review, significant deformity of the medial clavicle was noted and a CT scan showed anterior dislocation of the medial fragment. Given the degree of deformity and this functional requirement we felt that operative treatment was most appropriate for his unstable medial clavicle fracture dislocation. Conclusion: Surgical treatment of floating clavicle has an important role in the management of fit and active patients. It is important to identify the mechanism of injury and deforming forces in fractures and only after this to plan to neutralise these where appropriate. PMID:27299032

  17. Characterization of shales using sink float procedures

    SciTech Connect

    Vadovic, C.J.

    1983-01-01

    The analysis of the organic fraction in shale leads to important processing insights. However, the analysis is complicated by the presence of a substantial fraction of rock. The rock often contains carbon, as carbonates, and hydrogen, as water of hydration, which make it extremely difficult to obtain a true organic analysis. The route used most often to obtain organic analyses is to isolate the kerogen by acid removal of the inorganics. This poses numerous problems in that the acids used, HCl and HF, can interact with and be incorporated into the organic matrix. Also basic nitrogen compounds are easily extracted from the shale. It has been observed that up to 20% of the organic carbon and up to 50% of the total nitrogen may be removed by acid extraction. To obviate these difficulties a procedure has been developed which utilizes the analyses of raw sink float shale samples to calculate the ratios of organic hydrogen and nitrogen to organic carbon. In addition an estimate of the hydrogen and nitrogen content of the mineral matter is obtained. (JMT)

  18. Characterization of shales using sink float procedures

    SciTech Connect

    Vadovic, C.J.

    1983-02-01

    The analysis of the organic fraction in shale leads to important processing insights. However, the analysis is complicated by the presence of a substantial fraction of rock. The rock often contains carbon, as carbonates, and hydrogen, as water of hydration, which make it extremely difficult to obtain a true organic analysis. The route used most often to obtain organic analyses is to isolate the kerogen by acid removal of the inorganics. This poses numerous problems in that the acids used, HCl and HF, can interact with and be incorporated into the organic matrix. Also basic nitrogen compounds are easily extracted from the shale. It has been observed that up to 20% of the organic carbon and up to 50% of the total nitrogen may be removed by acid extraction. To obviate these difficulties a procedure has been developed which utilizes the analyses of raw sink float shale samples to calculate the ratios of organic hydrogen and nitrogen to organic carbon. In addition an estimate of the hydrogen and nitrogen content of the mineral matter is obtained.

  19. Multilateral installation from a floating rig

    SciTech Connect

    1998-07-01

    The Troll Olje gas province is approximately 100 km northwest of Bergen, Norway, in the Norwegian sector of the North Sea at a water depth of approximately 315 to 340 m. Troll Olje is part of the Troll gas field, where Norsk Hydro is responsible for developing two areas with thin oil rims. Before spudding the multilateral well described in this paper, 17 wells had been drilled and completed in the Troll Olje oil province. The multilateral-well concept was introduced in the gas province primarily to increase the drainage area for each well. When producing from two separate laterals, a lower drawdown pressure exists throughout the horizontal section. Therefore, gas coning is less likely to occur, and higher production rates can be sustained for a longer period of time. In addition, cost savings are substantial because of reduced well-construction time for each horizontal reservoir-drainage section and because of the reduced number of completion strings, subsea wellheads, and pipelines required for total field development. The full-length paper details design, development, testing, and installation of the first successful multilateral well installed from a floating rig offshore Norway. The paper gives a synopsis.

  20. Floating roof tank with rim space seal

    SciTech Connect

    Grove, R.B.; Peters, S.W.; Tellalian, M.L.

    1986-10-07

    This patent describes a vertical cylindrical liquid storage tank having a circular floating roof of smaller diameter than the tank thereby defining a clearance space between the roof edge and the tank wall; a seal joined to the roof and extending upwardly therefrom into slidable contact with the tank wall; the seal completely covering the clearance space; the seal comprising a plurality of individual flexible sections of sheet material in substantially side-by-side arrangement but with adjacent section side edge portions overlapping each other; a gasket between the overlapping side edge portions; a clip attached to each section adjacent its edge portion which is overlapped by the edge portion of an adjacent section; the clip having a wing spaced upward from the section to which it is attached and extending over the edge portion of the adjacent section to press the edge portions together, but permit the edge portions to slide laterally with respect to each other; and a flexible elastometric tip joined to the outer end of the sections and in slidable contact with the tank wall.

  1. VIEW OF FACILITY NO. S 20 NEAR THE POINT WHERE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    VIEW OF FACILITY NO. S 20 NEAR THE POINT WHERE IT JOINS FACILITY NO. S 21. NOTE THE ASPHALT-FILLED NARROW-GAUGE TRACKWAY WITH SOME AREAS OF STEEL TRACK SHOWING. VIEW FACING NORTHEAST - U.S. Naval Base, Pearl Harbor, Floating Dry Dock Quay, Hurt Avenue at northwest side of Magazine Loch, Pearl City, Honolulu County, HI

  2. Influence of different types of low substituted hydroxypropyl cellulose on tableting, disintegration, and floating behaviour of floating drug delivery systems

    PubMed Central

    Diós, Péter; Pernecker, Tivadar; Nagy, Sándor; Pál, Szilárd; Dévay, Attila

    2014-01-01

    The object of the present study is to evaluate the effect of application of low-substituted hydroxypropyl cellulose (L-HPC) 11 and B1 as excipients promoting floating in gastroretentive tablets. Directly compressed tablets were formed based on experimental design. Face-centred central composite design was applied with two factors and 3 levels, where amount of sodium alginate (X1) and L-HPC (X2) were the numerical factors. Applied types of L-HPCs and their 1:1 mixture were included in a categorical factor (X3). Studied parameters were floating lag time, floating time, floating force, swelling behaviour of tablets and dissolution of paracetamol, which was used as a model active substance. Due to their physical character, L-HPCs had different water uptake and flowability. Lower flowability and lower water uptake was observed after 60 min at L-HPC 11 compared to L-HPC B1. Shorter floating times were detected at L-HPC 11 and L-HPC mixtures with 0.5% content of sodium alginate, whereas alginate was the only significant factor. Evaluating results of drug release and swelling studies on floating tablets revealed correlation, which can serve to help to understand the mechanism of action of L-HPCs in the field development of gastroretentive dosage forms. PMID:26702261

  3. Mixed-precision evaluation of two-electron integrals by Rys quadrature

    NASA Astrophysics Data System (ADS)

    Asadchev, Andrey; Gordon, Mark S.

    2012-08-01

    A mixed precision implementation of two-electron integrals is demonstrated to have two benefits: (a) computations can be performed reliably in 32-bit precision on architectures for which 32-bit precision is significantly faster than 64-bit precision (e.g. graphical processing units), and (b) numerical results that match those using higher than 64-bit precision can be recovered without a significant penalty associated with performing the entire computation in higher precision. A justification is presented for using mixed precision in the Rys two-electron integral quadrature algorithm, together with timings and numerical results using a variety of floating-point types. The code discussed here presents a systematic way to control the accuracy of the Rys algorithm, regardless of the types and numbers of integrals.

  4. Channel-Like Bottom Features and High Bottom Melt Rates of Petermann Gletscher's Floating Tongue in Northwestern Greenland

    NASA Astrophysics Data System (ADS)

    Steffen, K.; Huff, R. D.; Cullen, N.; Rignot, E.; Stewart, C.; Jenkins, A.

    2003-12-01

    Petermann Gletscher is the largest and most influential outlet glacier in central northern Greenland. Located at 81 N, 60 W, it drains an area of 71,580 km2, with a discharge of 12 cubic km of ice per year into the Arctic Ocean. We finished a second field season in spring 2003 collecting in situ data on local climate, ice velocity, strain rates, ice thickness profiles and bottom melt rates of the floating ice tongue. Last years findings have been confirmed that large channels of several hundred meters in depth at the underside of the floating ice tongue are running roughly parallel to the flow direction. We mapped these channels using ground penetrating radar at 25 MHz frequency and multi-phase radar in profiling mode over half of the glacier's width. In addition, NASA airborne laser altimeter data was collected along and cross-glacier for accurate assessment of surface topography. We will present a 3-D model of the floating ice tongue and provide hypothesis of the origin and mechanism that caused these large ice channels at the bottom of the floating ice tongue. Multi-phase radar point measurements revealed interesting results of bottom melt rates, which exceed all previous estimates. It is worth mentioned that the largest bottom melt rates were not found at the grounding line, which is common on ice shelves in the Antarctica. In addition, GPS tidal motion has been measured over one lunar cycle at the flex zone and on the free floating ice tongue and the result will be compared to historic measurements made at the beginning of last century. The surface climate has been recorded by two automatic weather stations over a 12 month period, and the local climate of this remote region will be presented.

  5. Orogenic float of the Venezuelan Andes

    NASA Astrophysics Data System (ADS)

    Monod, Bernard; Dhont, Damien; Hervouët, Yves

    2010-07-01

    The Venezuelan (or Mérida) Andes are a NE-trending intracontinental orogen that started to rise from the Middle Miocene due to the E-W far field convergence between the Maracaibo block to the northwest and the Guyana shield to the southeast. Oblique convergence is responsible for strain partitioning with thrusting along both foreland basins and right-lateral strike-slip faulting along the NE-SW Boconó fault cutting the Venezuelan Andes along-strike. The central part of the belt is also cut by the N-S left-lateral strike-slip Valera fault that connects the Boconó fault, both faults bounding the Trujillo block that escapes towards the NNE. Even though the regional geology of belt is well known, its structure at depth remains a matter of debate. Our work, based on the integration of geological and geophysical data aims to better constrain the deep geometry of faults and the tectonic evolution of the mountain belt. We used the orogenic float model to construct two NW-SE trans-Andean crustal scale balanced sections. The Late Neogene-Quaternary shortening varies from 40 km in the south to 30 km in the north across the Trujillo block, indicating that a quarter of the deformation seems to be absorbed by the tectonic escape process. More importantly, a major reorganization in the crust took place in the Early Pliocene. It is characterized by the imbrication of the Maracaibo crust into the Guyana crust. This resulted in the subduction of the Guyana lower crust and the formation of a NW-vergent basement thrust propagating upwards and surfacing along the Las Virtudes thrust. Rapid uplift of the northern flank of the belt subsequently occurred together with massive deposition of the Plio-Quaternary coarse grained Betijoque formation in the northwestern foreland basin.

  6. Enhanced integral imaging system using image floating technique

    NASA Astrophysics Data System (ADS)

    Min, Sung-Wook; Kim, Joohwan; Lee, Byoungho

    2005-09-01

    Enhanced integral imaging system based on the image floating method is proposed. The integral imaging is one of the most promising methods among the autostereoscopic displays and the integrated image has the volumetric characteristics unlike the other stereoscopic images. The image floating is a common 3D display technique, which uses a big convex lens or a concave mirror to exhibit the image of a real object to the observer. The image floating method can be used to emphasize the viewing characteristics of the volumetric image and the noise image which is located on the fixed plane can be eliminated by the floating lens through the control of the focal length. In this paper, the solution of the seam noise and the image flipping of the integral imaging system is proposed using the image floating method. Moreover, the advanced techniques of the integral imaging system can be directly applied to the proposed system. The proposed system can be successfully applied to many 3D applications such as 3D television.

  7. Assessment of the nutrient removal effectiveness of floating treatment wetlands applied to urban retention ponds.

    PubMed

    Wang, Chih-Yu; Sample, David J

    2014-05-01

    The application of floating treatment wetlands (FTWs) in point and non-point source pollution control has received much attention recently. Although the potential of this emerging technology is supported by various studies, quantifying FTW performance in urban retention ponds remains elusive due to significant research gaps. Actual urban retention pond water was utilized in this mesocosm study to evaluate phosphorus and nitrogen removal efficiency of FTWs. Multiple treatments were used to investigate the contribution of each component in the FTW system with a seven-day retention time. The four treatments included a control, floating mat, pickerelweed (Pontederia cordata L.), and softstem bulrush (Schoenoplectus tabernaemontani). The water samples collected on Day 0 (initial) and 7 were analyzed for total phosphorus (TP), total particulate phosphorus, orthophosphate, total nitrogen (TN), organic nitrogen, ammonia nitrogen, nitrate-nitrite nitrogen, and chlorophyll-a. Statistical tests were used to evaluate the differences between the four treatments. The effects of temperature on TP and TN removal rates of the FTWs were described by the modified Arrhenius equation. Our results indicated that all three FTW designs, planted and unplanted floating mats, could significantly improve phosphorus and nitrogen removal efficiency (%, E-TP and E-TN) compared to the control treatment during the growing season, i.e., May through August. The E-TP and E-TN was enhanced by 8.2% and 18.2% in the FTW treatments planted with the pickerelweed and softstem bulrush, respectively. Organic matter decomposition was likely to be the primary contributor of nutrient removal by FTWs in urban retention ponds. Such a mechanism is fostered by microbes within the attached biofilms on the floating mats and plant root surfaces. Among the results of the four treatments, the FTWs planted with pickerelweed had the highest E-TP, and behaved similarly with the other two FTW treatments for nitrogen removal

  8. Performance of Point and Range Queries for In-memory Databases using Radix Trees on GPUs

    SciTech Connect

    Alam, Maksudul; Yoginath, Srikanth B; Perumalla, Kalyan S

    2016-01-01

    In in-memory database systems augmented by hardware accelerators, accelerating the index searching operations can greatly increase the runtime performance of database queries. Recently, adaptive radix trees (ART) have been shown to provide very fast index search implementation on the CPU. Here, we focus on an accelerator-based implementation of ART. We present a detailed performance study of our GPU-based adaptive radix tree (GRT) implementation over a variety of key distributions, synthetic benchmarks, and actual keys from music and book data sets. The performance is also compared with other index-searching schemes on the GPU. GRT on modern GPUs achieves some of the highest rates of index searches reported in the literature. For point queries, a throughput of up to 106 million and 130 million lookups per second is achieved for sparse and dense keys, respectively. For range queries, GRT yields 600 million and 1000 million lookups per second for sparse and dense keys, respectively, on a large dataset of 64 million 32-bit keys.

  9. Seismic monitoring in the oceans by autonomous floats

    NASA Astrophysics Data System (ADS)

    Sukhovich, Alexey; Bonnieux, Sébastien; Hello, Yann; Irisson, Jean-Olivier; Simons, Frederik J.; Nolet, Guust

    2015-08-01

    Our understanding of the internal dynamics of the Earth is largely based on images of seismic velocity variations in the mantle obtained with global tomography. However, our ability to image the mantle is severely hampered by a lack of seismic data collected in marine areas. Here we report observations made under different noise conditions (in the Mediterranean Sea, the Indian and Pacific Oceans) by a submarine floating seismograph, and show that such floats are able to fill the oceanic data gap. Depending on the ambient noise level, the floats can record between 35 and 63% of distant earthquakes with a moment magnitude M>=6.5. Even magnitudes <6.0 can be successfully observed under favourable noise conditions. The serendipitous recording of an earthquake swarm near the Indian Ocean triple junction enabled us to establish a threshold magnitude between 2.7 and 3.4 for local earthquakes in the noisiest of the three environments.

  10. Seismic monitoring in the oceans by autonomous floats.

    PubMed

    Sukhovich, Alexey; Bonnieux, Sébastien; Hello, Yann; Irisson, Jean-Olivier; Simons, Frederik J; Nolet, Guust

    2015-08-20

    Our understanding of the internal dynamics of the Earth is largely based on images of seismic velocity variations in the mantle obtained with global tomography. However, our ability to image the mantle is severely hampered by a lack of seismic data collected in marine areas. Here we report observations made under different noise conditions (in the Mediterranean Sea, the Indian and Pacific Oceans) by a submarine floating seismograph, and show that such floats are able to fill the oceanic data gap. Depending on the ambient noise level, the floats can record between 35 and 63% of distant earthquakes with a moment magnitude M≥6.5. Even magnitudes <6.0 can be successfully observed under favourable noise conditions. The serendipitous recording of an earthquake swarm near the Indian Ocean triple junction enabled us to establish a threshold magnitude between 2.7 and 3.4 for local earthquakes in the noisiest of the three environments.

  11. Prediction of ion drift effects on spacecraft floating potentials

    NASA Technical Reports Server (NTRS)

    Chang, J. S.; Prokopenko, S. M. L.; Godard, R.; Laframboise, J. G.

    1979-01-01

    The plasma environment of high altitude spacecraft was observed to involve ion drift velocities which sometimes become comparable to ion mean thermal speeds. Such drifts may cause an electrically isolated spacecraft surface to float at a substantially increased negative potential if it is simultaneously shaded and downstream relative to the drift direction. The results showed that: (1) the ion speed ratio at which drift effects become important (i.e. change the floating potential by at least 10 percent) can be as low as 0.1, and may be decreased if the ambient electrons are non-Maxwellian; (2) the effects of ion speed ratio increase with increasing ion-to-electron temperature ratio; and (3) negative floating potentials for drifting Maxwellian ion velocity distributions with speed ratio unity are typically about twice as large as the corresponding potentials for nondrifting conditions.

  12. The New ORNL Multicharged Ion Research Facility Floating Beamline

    SciTech Connect

    Meyer, Fred W; Fogle, Mark R.; Hale, Jerry W

    2007-01-01

    We report on the development and implementation of a new beam line at the ORNL Multicharged Ion Research Facility (MIRF) that is floatable at up to -12 kV and injected by a 10 GHz CAPRICE ECR ion source and is part of a major facility upgrade project. With the floating beam line operating at negative high voltage, and the ECR source at ground potential, intense DC beam deceleration into grounded experimental chambers to energies as low as a few eV/q is made possible. The primary application of these ion beams is to study fundamental collisional interactions of multicharged ions with electrons, atoms, and surfaces. Design details of the floating beam line, including source extraction, deceleration optics and voltage isolation will be presented. The novel features of a LABVIEW-based computer control system developed for the floating beam line will be described as well.

  13. Expanded polystyrene (EPS) floats for surveillance of Ochlerotatus japonicus.

    PubMed

    Scott, Jamesina J; Crans, Wayne J

    2003-12-01

    Blocks of expanded polystyrene (EPS) were placed in a variety of habitats to investigate their potential as an egg-collection device for container-dwelling Aedes and Ochlerotatus species. Eggs from Ochlerotatus japonicus, Oc. triseriatus, Oc. hendersoni, and Aedes albopictus were collected with EPS floats. The float provides an inexpensive, low-maintenance alternative to the Centers for Disease Control ovitrap for sampling container-dwelling mosquito species that are important vectors of disease. Eggs collected on the floats have many potential applications, including use in routine population surveillance; detection of Oc. japonicus, Ae. albopictus, and other container-dwelling species in new areas; species distribution studies; natural transovarial transmission studies; ovipositional studies; collection of local field populations for insecticide resistance assays; assessment of adulticiding efficacy; and establishment of new laboratory colonies.

  14. Float-zone processing in a weightless environment

    NASA Technical Reports Server (NTRS)

    Fowle, A. A.; Haggerty, J. S.; Perron, R. R.; Strong, P. F.; Swanson, J. L.

    1976-01-01

    The results were reported of investigations to: (1) test the validity of analyses which set maximum practical diameters for Si crystals that can be processed by the float zone method in a near weightless environment, (2) determine the convective flow patterns induced in a typical float zone, Si melt under conditions perceived to be advantageous to the crystal growth process using flow visualization techniques applied to a dimensionally scaled model of the Si melt, (3) revise the estimates of the economic impact of space produced Si crystal by the float zone method on the U.S. electronics industry, and (4) devise a rational plan for future work related to crystal growth phenomena wherein low gravity conditions available in a space site can be used to maximum benefit to the U.S. electronics industry.

  15. Floating plastic debris in the Central and Western Mediterranean Sea.

    PubMed

    Ruiz-Orejón, Luis F; Sardá, Rafael; Ramis-Pujol, Juan

    2016-09-01

    In two sea voyages throughout the Mediterranean (2011 and 2013) that repeated the historical travels of Archduke Ludwig Salvator of Austria (1847-1915), 71 samples of floating plastic debris were obtained with a Manta trawl. Floating plastic was observed in all the sampled sites, with an average weight concentration of 579.3 g dw km(-2) (maximum value of 9298.2 g dw km(-2)) and an average particle concentration of 147,500 items km(-2) (the maximum concentration was 1,164,403 items km(-2)). The plastic size distribution showed microplastics (<5 mm) in all the samples. The most abundant particles had a surface area of approximately 1 mm(2) (the mesh size was 333 μm). The general estimate obtained was a total value of 1455 tons dw of floating plastic in the entire Mediterranean region, with various potential spatial accumulation areas.

  16. Seismic monitoring in the oceans by autonomous floats

    PubMed Central

    Sukhovich, Alexey; Bonnieux, Sébastien; Hello, Yann; Irisson, Jean-Olivier; Simons, Frederik J.; Nolet, Guust

    2015-01-01

    Our understanding of the internal dynamics of the Earth is largely based on images of seismic velocity variations in the mantle obtained with global tomography. However, our ability to image the mantle is severely hampered by a lack of seismic data collected in marine areas. Here we report observations made under different noise conditions (in the Mediterranean Sea, the Indian and Pacific Oceans) by a submarine floating seismograph, and show that such floats are able to fill the oceanic data gap. Depending on the ambient noise level, the floats can record between 35 and 63% of distant earthquakes with a moment magnitude M≥6.5. Even magnitudes <6.0 can be successfully observed under favourable noise conditions. The serendipitous recording of an earthquake swarm near the Indian Ocean triple junction enabled us to establish a threshold magnitude between 2.7 and 3.4 for local earthquakes in the noisiest of the three environments. PMID:26289598

  17. Investigation of field induced trapping on floating gates

    NASA Technical Reports Server (NTRS)

    Gosney, W. M.

    1975-01-01

    The development of a technology for building electrically alterable read only memories (EAROMs) or reprogrammable read only memories (RPROMs) using a single level metal gate p channel MOS process with all conventional processing steps is outlined. Nonvolatile storage of data is achieved by the use of charged floating gate electrodes. The floating gates are charged by avalanche injection of hot electrodes through gate oxide, and discharged by avalanche injection of hot holes through gate oxide. Three extra diffusion and patterning steps are all that is required to convert a standard p channel MOS process into a nonvolatile memory process. For identification, this nonvolatile memory technology was given the descriptive acronym DIFMOS which stands for Dual Injector, Floating gate MOS.

  18. Floating-Harbor syndrome associated with middle ear abnormalities.

    PubMed

    Hendrickx, Jan-Jaap; Keymolen, Kathelijn; Desprechins, Brigitte; Casselman, Jan; Gordts, Frans

    2010-01-01

    Floating-Harbor syndrome is a rare syndrome of unknown etiology, which was first described in 1973. A triad of main features characterizes Floating-Harbor syndrome: short stature, characteristic face, and an expressive speech delay. We present a patient in whom the hearing thresholds improved insufficiently after placement of grommets. High-resolution CT scan of the temporal bone showed a prominent soft-tissue thickening suspected of causing fixation of the malleus, and fusion of the malleus head with the body of the incus. To our knowledge this is the first reported abnormal middle ear anatomy in a patient with Floating-Harbor syndrome. A conservative treatment with hearing aids was preferred as an initial treatment in favor of a surgical exploration.

  19. Research of design challenges and new technologies for floating LNG

    NASA Astrophysics Data System (ADS)

    Lee, Dong-Hyun; Ha, Mun-Keun; Kim, Soo-Young; Shin, Sung-Chul

    2014-06-01

    With the rate of worldwide LNG demand expected to grow faster than that of gas demand, most major oil companies are currently investing their resources to develop floating LNG-FLNG (i.e. LNG FSRU and LNG FPSO). The global Floating LNG (FLNG) market trend will be reviewed based on demand and supply chain relationships. Typical technical issues associated with FLNG design are categorized in terms of global performance evaluation. Although many proven technologies developed through LNG carrier and oil FPSO projects are available for FLNG design, we are still faced with several technical challenges to clear for successful FLNG projects. In this study, some of the challenges encountered during development of the floating LNG facility (i.e. LNG FPSO and FSRU) will be reviewed together with their investigated solution. At the same time, research of new LNG-related technologies such as combined containment system will be presented.

  20. Numerical modelling of floating debris in the world's oceans.

    PubMed

    Lebreton, L C-M; Greer, S D; Borrero, J C

    2012-03-01

    A global ocean circulation model is coupled to a Lagrangian particle tracking model to simulate 30 years of input, transport and accumulation of floating debris in the world ocean. Using both terrestrial and maritime inputs, the modelling results clearly show the formation of five accumulation zones in the subtropical latitudes of the major ocean basins. The relative size and concentration of each clearly illustrate the dominance of the accumulation zones in the northern hemisphere, while smaller seas surrounded by densely populated areas are also shown to have a high concentration of floating debris. We also determine the relative contribution of different source regions to the total amount of material in a particular accumulation zone. This study provides a framework for describing the transport, distribution and accumulation of floating marine debris and can be continuously updated and adapted to assess scenarios reflecting changes in the production and disposal of plastic worldwide.

  1. Low absorption float glass for back surface solar reflectors

    NASA Astrophysics Data System (ADS)

    Goodyear, J. K.; Lindberg, V. L.

    1980-09-01

    It is shown that low iron float glass with relatively flat surfaces can be fabricated by the float process, and that this glass can make an excellent back surface mirror for solar energy concentrators, such as the heliostats planned for the Solar Ten Megawatt Power Project at Barstow, California. At 3 mm thickness, the low iron glass has a mean solar transmittance of 89.3%, and will produce heliostat mirrors with a calculated solar reflectance of 89.6%. The flatness of Ford 3-mm float glass is approximately 0.4 mrad, which is well below the minimum average slope angle requirement (2.5 mrad) to produce good quality heliostat reflectors.

  2. Design, development and evaluation of clopidogrel bisulfate floating tablets

    PubMed Central

    Rao, K. Rama Koteswara; Lakshmi, K. Rajya

    2014-01-01

    Objective: The objective of the present work was to formulate and to characterize a floating drug delivery system for clopidogrel bisulphate to improve bioavailability and to minimize the side effects of the drug such as gastric bleeding and drug resistance development. Materials and Methods: Clopidogrel floating tablets were prepared by direct compression technique by the use of three polymers xanthan gum, hydroxypropyl methylcellulose (HPMC) K15M and HPMC K4M in different concentrations (20%, 25% and 30% w/w). Sodium bicarbonate (15% w/w) and microcrystalline cellulose (30% w/w) were used as gas generating agent and diluent respectively. Studies were carried out on floating behavior and influence of type of polymer on drug release rate. All the formulations were subjected to various quality control and in-vitro dissolution studies in 0.1 N hydrochloric acid (1.2 pH) and corresponding dissolution data were fitted to popular release kinetic equations in order to evaluate release mechanisms and kinetics. Results and Discussion: All the clopidogrel floating formulations followed first order kinetics, Higuchi drug release kinetics with diffusion as the dominant mechanism of drug release. As per Korsmeyer-Peppas equation, the release exponent “n” ranged 0.452-0.654 indicating that drug release from all the formulations was by non-Fickian diffusion mechanism. The drug release rate of clopidogrel was found to be affected by the type and concentration of the polymer used in the formulation (P < 0.05). As the concentration of the polymer was increased, the drug release was found to be retarded. Conclusion: Based on the results, clopidogrel floating tablets prepared by employing xanthan gum at concentration 25% w/w (formulation F2) was the best formulation with desired in-vitro floating time and drug dissolution. PMID:24678458

  3. Vegetation, substrate and hydrology in floating marshes in the Mississippi river delta plain wetlands, USA

    USGS Publications Warehouse

    Sasser, C.E.; Gosselink, J.G.; Swenson, E.M.; Swarzenski, C.M.; Leibowitz, N.C.

    1996-01-01

    In the 1940s extensive floating marshes (locally called 'flotant') were reported and mapped in coastal wetlands of the Mississippi River Delta Plain. These floating marshes included large areas of Panicum hemitomon-dominated freshwater marshes, and Spartina patens/Scirpus olneyi brackish marshes. Today these marshes appear to be quite different in extent and type. We describe five floating habitats and one non-floating, quaking habitat based on differences in buoyancy dynamics (timing and degree of floating), substrate characteristics, and dominant vegetation. All floating marshes have low bulk density, organic substrates. Nearly all are fresh marshes. Panicum hemitomon floating marshes presently occur within the general regions that were reported in the 1940's by O'Neil, but are reduced in extent. Some of the former Panicum hemitomon marshes have been replaced by seasonally or variably floating marshes dominated, or co-dominated by Sagittaria lancifolia or Eleocharis baldwinii. ?? 1996 Kluwer Academic Publishers.

  4. 40 CFR 65.43 - Fixed roof with an internal floating roof (IFR).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... drains, each opening shall be equipped with a gasketed cover or gasketed lid. (iii) Each penetration of... cover, access hatch, gauge float well, or lid on any opening in the internal floating roof shall...

  5. 40 CFR 65.43 - Fixed roof with an internal floating roof (IFR).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... drains, each opening shall be equipped with a gasketed cover or gasketed lid. (iii) Each penetration of... cover, access hatch, gauge float well, or lid on any opening in the internal floating roof shall...

  6. Case Report: Floating fat globule within an arachnoid cyst

    PubMed Central

    Sudhir, Jayanand; Gopalakrishnan, Chittur Viswanathan; Prabhu, Sathia; Chinchure, Swati

    2011-01-01

    Intralesional floating fat globules have been reported in cystic lesions such as teratoma of the ovary and dermoid of the head and neck but not within intracranial lesions. Fat globules dispersed within the subarachnoid space are a known imaging finding of ruptured intracranial dermoid. We report a unique case of an intralesional solitary floating fat globule within a multicompartmental arachnoid cyst, with varying locations on serial imaging. We also put forward a hypothesis for the pathogenesis of fat within an arachnoid cyst. To the best of our knowledge, this is the first such report in the literature. PMID:22013301

  7. 49 CFR 195.405 - Protection against ignitions and safe access/egress involving floating roofs.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    .../egress involving floating roofs. 195.405 Section 195.405 Transportation Other Regulations Relating to....405 Protection against ignitions and safe access/egress involving floating roofs. (a) After October 2... floating roofs of in-service aboveground breakout tanks to perform inspection, service, maintenance...

  8. 49 CFR 195.405 - Protection against ignitions and safe access/egress involving floating roofs.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    .../egress involving floating roofs. 195.405 Section 195.405 Transportation Other Regulations Relating to....405 Protection against ignitions and safe access/egress involving floating roofs. (a) After October 2... floating roofs of in-service aboveground breakout tanks to perform inspection, service, maintenance...

  9. 33 CFR 144.01-5 - Location and launching of life floats.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 33 Navigation and Navigable Waters 2 2011-07-01 2011-07-01 false Location and launching of life floats. 144.01-5 Section 144.01-5 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND... Location and launching of life floats. The life floats shall be distributed in accessible locations...

  10. 33 CFR 144.01-5 - Location and launching of life floats.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 33 Navigation and Navigable Waters 2 2013-07-01 2013-07-01 false Location and launching of life floats. 144.01-5 Section 144.01-5 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND... Location and launching of life floats. The life floats shall be distributed in accessible locations...

  11. 33 CFR 144.01-5 - Location and launching of life floats.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 33 Navigation and Navigable Waters 2 2014-07-01 2014-07-01 false Location and launching of life floats. 144.01-5 Section 144.01-5 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND... Location and launching of life floats. The life floats shall be distributed in accessible locations...

  12. 46 CFR 117.137 - Stowage of life floats and buoyant apparatus.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 4 2012-10-01 2012-10-01 false Stowage of life floats and buoyant apparatus. 117.137... EQUIPMENT AND ARRANGEMENTS Survival Craft Arrangements and Equipment § 117.137 Stowage of life floats and buoyant apparatus. (a) In addition to meeting § 117.130, each life float and buoyant apparatus must...

  13. 33 CFR 144.01-5 - Location and launching of life floats.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 33 Navigation and Navigable Waters 2 2012-07-01 2012-07-01 false Location and launching of life floats. 144.01-5 Section 144.01-5 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND... Location and launching of life floats. The life floats shall be distributed in accessible locations...

  14. 40 CFR 63.942 - Standards-Surface impoundment floating membrane cover.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... the perimeter of the cover opening and the closure device. (5) The floating membrane cover may be... 40 Protection of Environment 10 2011-07-01 2011-07-01 false Standards-Surface impoundment floating... impoundment floating membrane cover. (a) This section applies to owners and operators subject to this...

  15. 40 CFR 63.942 - Standards-Surface impoundment floating membrane cover.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... the perimeter of the cover opening and the closure device. (5) The floating membrane cover may be... 40 Protection of Environment 10 2010-07-01 2010-07-01 false Standards-Surface impoundment floating... impoundment floating membrane cover. (a) This section applies to owners and operators subject to this...

  16. 46 CFR 117.137 - Stowage of life floats and buoyant apparatus.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Stowage of life floats and buoyant apparatus. 117.137... EQUIPMENT AND ARRANGEMENTS Survival Craft Arrangements and Equipment § 117.137 Stowage of life floats and buoyant apparatus. (a) In addition to meeting § 117.130, each life float and buoyant apparatus must...

  17. 46 CFR 117.137 - Stowage of life floats and buoyant apparatus.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Stowage of life floats and buoyant apparatus. 117.137... EQUIPMENT AND ARRANGEMENTS Survival Craft Arrangements and Equipment § 117.137 Stowage of life floats and buoyant apparatus. (a) In addition to meeting § 117.130, each life float and buoyant apparatus must...

  18. 76 FR 52269 - Safety Zone; Port Huron Float Down, St. Clair River, Port Huron, MI

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-22

    ... SECURITY Coast Guard 33 CFR Part 165 RIN 1625-AA00 Safety Zone; Port Huron Float Down, St. Clair River... Port Huron Float Down. Though this is an unsanctioned, non-permitted event, this temporary safety zone... float-down events. DATES: This rule is effective and will be enforced from 12 to 8 p.m. on August...

  19. 29 CFR 1926.1437 - Floating cranes/derricks and land cranes/derricks on barges.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 29 Labor 8 2012-07-01 2012-07-01 false Floating cranes/derricks and land cranes/derricks on barges... Cranes and Derricks in Construction § 1926.1437 Floating cranes/derricks and land cranes/derricks on barges. (a) This section contains supplemental requirements for floating cranes/derricks and land...

  20. 29 CFR 1926.1437 - Floating cranes/derricks and land cranes/derricks on barges.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 29 Labor 8 2013-07-01 2013-07-01 false Floating cranes/derricks and land cranes/derricks on barges... Cranes and Derricks in Construction § 1926.1437 Floating cranes/derricks and land cranes/derricks on barges. (a) This section contains supplemental requirements for floating cranes/derricks and land...

  1. 78 FR 33703 - Safety Zone; Great Western Tube Float; Colorado River; Parker, AZ

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-06-05

    ... No. USCG-2013-0268] RIN 1625-AA00 Safety Zone; Great Western Tube Float; Colorado River; Parker, AZ... Tube Float on June 8, 2013. This temporary safety zone is necessary to provide for the safety of the....). The Parker Area Chamber of Commerce is sponsoring the Great Western Tube Float, which is held on...

  2. Floating Collection in an Academic Library: An Audacious Experiment That Succeeded

    ERIC Educational Resources Information Center

    Coopey, Barbara; Eshbach, Barbara; Notartomas, Trish

    2016-01-01

    Can a floating collection thrive in a large multicampus academic research library? Floating collections have been successful in public libraries for some time, but it is uncommon for academic libraries and unheard of for a large academic library system. This article will discuss the investigation into the feasibility of a floating collection at…

  3. Investigated performance of uncooled tantalum-doped VOx floating-type microbolometers

    NASA Astrophysics Data System (ADS)

    Lee, Hsin-Ying; Wu, Chia-Ling; Kao, Ching-Hua; Lee, Ching-Ting; Tang, Shiang-Feng; Lin, Wen-Jen; Chen, Hsin-Chang; Lin, Jia-Ching

    2015-11-01

    Various tantalum (Ta)-doped vanadium oxide (VOx:Ta) films with various Ta doping contents were deposited on the Si substrates as the sensitive layer of the floating-type microbolometers using a magnetron radio frequency (RF) co-sputtering system. The vanadium (V) target and the tantalum pentoxide (Ta2O5) target were used to deposit the VOx:Ta films. To improve the microbolometer responsivity by effectively reducing the thermal loss from the Si substrates, the floating-type microbolometers were fabricated using bulk micromachining technique. From the X-ray photoelectron spectroscopy (XPS) spectra, except the V2O5 and V6O13, the lower oxygen state of VOx films, such as VO2 and V2O3, were also obtained by doping Ta into the VOx films. Consequently, compared with the VO2 microbolometers, the VOx:Ta microbolometers could operate at a higher operating temperature range. The temperature coefficient of resistance (TCR) and the resistivity of the VOx:Ta (Ta content of 7.63%) films measured by four point probe measurement in heating system were -3.47%/K and 9.32 Ω-cm, respectively. The Ta-doped VOx microbolometer revealed a higher responsivity of 341 kV/W compared with 106 kV/W of the undoped VOx microbolometer.

  4. Physical measurements of breaking wave impact on a floating wave energy converter

    NASA Astrophysics Data System (ADS)

    Hann, Martyn R.; Greaves, Deborah M.; Raby, Alison

    2013-04-01

    Marine energy converter must both efficiently extract energy in small to moderate seas and also successfully survive storms and potential collisions. Extreme loads on devices are therefore an important consideration in their design process. X-MED is a SuperGen UKCMER project and is a collaboration between the Universities of Manchester, Edinburgh and Plymouth and the Scottish Association for Marine Sciences. Its objective is to extend the knowledge of extreme loads due to waves, currents, flotsam and mammal impacts. Plymouth Universities contribution to the X-MED project involves measuring the loading and response of a taut moored floating body due to steep and breaking wave impacts, in both long crested and directional sea states. These measurements are then to be reproduced in STAR-CCM+, a commercial volume of fluid CFD solver, so as to develop techniques to predict the wave loading on wave energy converters. The measurements presented here were conducted in Plymouth Universities newly opened COAST laboratories 35m long, 15.5m wide and 3m deep ocean basin. A 0.5m diameter taut moored hemispherical buoy was used to represent a floating wave energy device or support structure. The changes in the buoys 6 degree of freedom motion and mooring loads are presented due to focused breaking wave impacts, with the breaking point of the wave changed relative to the buoy.

  5. Estimating the center of mass of a free-floating body in microgravity.

    PubMed

    Lejeune, L; Casellato, C; Pattyn, N; Neyt, X; Migeotte, P-F

    2013-01-01

    This paper addresses the issue of estimating the position of the center of mass (CoM) of a free-floating object of unknown mass distribution in microgravity using a stereoscopic imaging system. The method presented here is applied to an object of known mass distribution for validation purposes. In the context of a study of 3-dimensional ballistocardiography in microgravity, and the elaboration of a physical model of the cardiovascular adaptation to weightlessness, the hypothesis that the fluid shift towards the head of astronauts induces a significant shift of their CoM needs to be tested. The experiments were conducted during the 57th parabolic flight campaign of the European Space Agency (ESA). At the beginning of the microgravity phase, the object was given an initial translational and rotational velocity. A 3D point cloud corresponding to the object was then generated, to which a motion-based method inspired by rigid body physics was applied. Through simulations, the effects of the centroid-to-CoM distance and the number of frames of the sequence are investigated. In experimental conditions, considering the important residual accelerations of the airplane during the microgravity phases, CoM estimation errors (16 to 76 mm) were consistent with simulations. Overall, our results suggest that the method has a good potential for its later generalization to a free-floating human body in a weightless environment.

  6. Detached and Floating-Zone Growth of Semiconductor Crystals on the ISS

    NASA Technical Reports Server (NTRS)

    Dold, P.; Kaiser, N.; Benz, K. W.; Croell, A.; Szofran, F. R.; Cobb, S.; Volz, M.; Schweizer, M.; Rose, M. Franklin (Technical Monitor)

    2000-01-01

    Understanding the mechanism of detached Bridgman growth and establishing the growth of large scale germanium-silicon crystals by the float-zone technique are the key points of the project "RDGS - Reduction of Defects in Germanium-Silicon". The contact angle of the melt and the growth angle of the crystal are essential parameters which allow a controlled use of detached growth. The contact angle was determined for a variety of different substrates and melt compositions; pBN showed the highest value for pure germanium as well as for germanium-rich GeSi melts. The growth angle of Ge(sub 0.95) Si(sub 0.05) was measured to be 8.5-10.5 degrees which concurs with the values of pure germanium and silicon, respectively. The temperature dependence and the concentration dependence of the surface tension were determined for concentrations up to 10at% silicon (partial derivative (gamma)/partial derivative T=-0.08 (raised dot) 10(exp -3)N/m (raised dot) K, partial derivative (gamma)/partial derivative (C)=2.2 (raised dot) 10(exp -3)N/m (raised dot) at%). Using these values, the critical Marangoni number indicating the transition to time-dependent thermocapillary flow will be exceeded for the growth of large scale float-zone crystals onboard the ISS. Therefore, suitable tools for flow control are required.

  7. Low-frequency vibration control of floating slab tracks using dynamic vibration absorbers

    NASA Astrophysics Data System (ADS)

    Zhu, Shengyang; Yang, Jizhong; Yan, Hua; Zhang, Longqing; Cai, Chengbiao

    2015-09-01

    This study aims to effectively and robustly suppress the low-frequency vibrations of floating slab tracks (FSTs) using dynamic vibration absorbers (DVAs). First, the optimal locations where the DVAs are attached are determined by modal analysis with a finite element model of the FST. Further, by identifying the equivalent mass of the concerned modes, the optimal stiffness and damping coefficient of each DVA are obtained to minimise the resonant vibration amplitudes based on fixed-point theory. Finally, a three-dimensional coupled dynamic model of a metro vehicle and the FST with the DVAs is developed based on the nonlinear Hertzian contact theory and the modified Kalker linear creep theory. The track irregularities are included and generated by means of a time-frequency transformation technique. The effect of the DVAs on the vibration absorption of the FST subjected to the vehicle dynamic loads is evaluated with the help of the insertion loss in one-third octave frequency bands. The sensitivities of the mass ratio of DVAs and the damping ratio of steel-springs under the floating slab are discussed as well, which provided engineers with the DVA's adjustable room for vibration mitigation. The numerical results show that the proposed DVAs could effectively suppress low-frequency vibrations of the FST when tuned correctly and attached properly. The insertion loss due to the attachment of DVAs increases as the mass ratio increases, whereas it decreases with the increase in the damping ratio of steel-springs.

  8. Floating Wetland Islands Help Restore Large Pennsylvania Lake

    EPA Pesticide Factsheets

    One of Pennsylvania’s largest lakes has been removed from the list of impaired waters following years of EPA-funded work to control phosphorus pollution. One of the innovative actions taken to meet the goal was deployment of five floating wetland islands.

  9. Floating Wetland Islands Help Restore Large PA Lake

    EPA Pesticide Factsheets

    One of Pennsylvania’s largest natural lakes has been removed from the state’s list of impaired waters following years of EPA-funded work to control phosphorus pollution. One of the innovative actions taken to meet the goal was use of 5 floating wetlands.

  10. 40 CFR 63.1043 - Standards-Separator floating roof.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ...) National Emission Standards for Oil-Water Separators and Organic-Water Separators § 63.1043 Standards... controlling air emissions from an oil-water separator or organic-water separator using a floating roof. (b... visible cracks, holes, gaps, or other open spaces in the closure device or between the perimeter of...

  11. 40 CFR 63.1043 - Standards-Separator floating roof.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...) National Emission Standards for Oil-Water Separators and Organic-Water Separators § 63.1043 Standards... controlling air emissions from an oil-water separator or organic-water separator using a floating roof. (b... visible cracks, holes, gaps, or other open spaces in the closure device or between the perimeter of...

  12. Topside facilities for floating production systems require new engineering thinking

    SciTech Connect

    Burn, A.J.; Graaf, G.

    1983-05-01

    Since the oil industry moved offshore, great emphasis has been placed on the need to reduce space and weight requirements of topside facilities. For successful design of floating production systems, weight consciousness assumes an even higher level of importance, necessitating systematic attention to detail even at the feasibility study stage of a project.

  13. Experiment study of the motion of the floating offshore turbine

    NASA Astrophysics Data System (ADS)

    Chuang, Tzu-Ching; Hsu, Wen-Yang; Yang, Ray-Yeng; Chen, Yang-Yi

    2016-04-01

    Recently the wind industry moved to offshore areas. The floating wind turbine combined the platform and the mooring system. This research focuses on studying the motion of the floating offshore turbine with a mooring system. The platform, which was developed by the Ship and Ocean Industries R&D Center, had been test in a wave-wind flume in the Tainan Hydraulics Laboratory by using a 1:50 Froude scaling model. In the experiment, the floating offshore turbine was placed in a water flume and exposed to periodic waves at frequencies ranging from 0.22 rad/s - 0.875 rad/s, the wave amplitude is about 2.5 meter, and with the different pretension of the mooring lines. The experiment includes the measurement of damping coefficient from the free decay test and the dynamic response in a sea state. This research compares the motion of the floating offshore turbine with the different pretension of the mooring lines, and the model provides comprehensive data for the operational, design, and survival seas states, as well as the calibration and improvement of the existing design and performance of numerical models.

  14. 40 CFR 65.44 - External floating roof (EFR).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... breaker vents) and rim space vents, each opening in the noncontact external floating roof shall provide a... they are closed. (iii) Except for automatic bleeder vents, rim space vents, roof drains, and leg... and rim space vents shall be equipped with a gasket. (v) Each roof drain that empties into the...

  15. 40 CFR 65.44 - External floating roof (EFR).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... breaker vents) and rim space vents, each opening in the noncontact external floating roof shall provide a... they are closed. (iii) Except for automatic bleeder vents, rim space vents, roof drains, and leg... and rim space vents shall be equipped with a gasket. (v) Each roof drain that empties into the...

  16. The sheath effect on the floating harmonic method

    SciTech Connect

    Lee, Jaewon; Kim, Kyung-Hyun; Chung, Chin-Wook

    2015-12-15

    The floating harmonic method biases sinusoidal voltage to a probe sheath, and as its response, harmonic currents can be obtained. These currents can be used to determine the plasma parameters. However, different shapes of probes have different shapes of sheaths that can affect the diagnostic results. However, no research has been done on the sheath effect on the floating harmonic method. Therefore, we investigate the effect of the sheath during floating harmonic diagnostics by comparing cylindrical and planar probes. While the sinusoidal voltages were applied to a probe, because the sheath oscillated, the time variant ion current and their harmonic currents were added to the electron harmonic currents. In the floating harmonic method, the harmonic currents are composed of only the electron harmonic currents. Therefore, the ion harmonic currents affect the diagnostic results. In particular, the electron temperature obtained by the small probe tip was higher than that of the large probe tip. This effect was exacerbated when the ratio of the probe tip radius to the sheath length was smaller.

  17. Experimental and Numerical Investigations of Floating Breakwater Performance.

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Floating breakwaters are commonly used to protect small marinas and for shoreline erosion control in coastal areas. They are efficient wave attenuation structures for relatively short waves and shallow water depths. The main objective of the current study is to investigate the hydrodynamic interacti...

  18. Asymptomatic free-floating vitreous cyst masquerading as cysticercosis.

    PubMed

    Ganger, Anita; Agarwal, Rinki; Kumar, Vinod

    2016-11-02

    A male patient aged 37 years, referred with the diagnosis of right eye intravitreal cysticercosis, was diagnosed as asymptomatic free-floating vitreous cyst after thorough evaluation. The patient was kept under observation, since baseline visual acuity was unaffected. No change was noted over the period of 6 months.

  19. Release kinetics of highly porous floating tablets containing cilostazol.

    PubMed

    Hwang, Kyu-Mok; Cho, Cheol-Hee; Tung, Nguyen-Thach; Kim, Ju-Young; Rhee, Yun-Seok; Park, Eun-Seok

    2017-02-20

    This study focuses on developing a highly porous floating tablet containing cilostazol. The underlying release mechanism of cilostazol from porous and floating tablets in dissolution media containing surfactants was investigated. The tablets were prepared by compressing granules and excipients with a sublimating agent, followed by sublimation under vacuum. The volatile material for the sublimating agent was chosen based on its flow properties using conventional methods as well as the twisted blade method. Resultant tablets could float immediately and had significantly higher tensile strengths than conventional tablets of similar porosities, holding a promising potential for increasing gastroretentive properties. Fitting the release profiles to the Korsmeyer-Peppas equation indicated Super Case II, Case II and non-Fickian kinetics, which implied that the release was affected by both floating behavior and matrix erosion. Abrupt changes in release kinetic parameters and erosional behaviors were found between the tablets containing different amounts of HPMC, indicating the existence of an excipient percolation threshold. Neither the surfactant in the media nor the porosity affected the dominant release mechanism, which was matrix erosion. Understanding the dominant release mechanism and percolation threshold allows for tuning the formulation to obtain various release profiles.

  20. Problematic Issue for Students: Does It Sink or Float?

    ERIC Educational Resources Information Center

    Ünal, Suat; Costu, Bayram

    2005-01-01

    The aim of this study is to investigate grade-eight students' conceptions of sinking and floating. Firstly, semi-structured interviews were conducted with 12 students to determine students' difficulties and to develop a multiple-choice diagnostic test. In designing the content of the interview questions, grade-eight science curriculum, research on…

  1. Size Effect of Embedded Nanocrystals in Floating Gate MOSFET Devices

    NASA Astrophysics Data System (ADS)

    Cheng, X. Z.; Jalil, M. B. A.; Samudra, G. S.

    2011-12-01

    We investigate the transport and retention properties of a floating-gate MOSFET memory device incorporating embedded nanocrystals. Of particular interest is the nanocrystal size effect on the retention lifetime of the device. The quantum confinement effects and changes to the electrostatic energy arising from the decrease of the nanocrystal size are analyzed both numerically and analytically.

  2. CMOS Active-Pixel Image Sensor With Simple Floating Gates

    NASA Technical Reports Server (NTRS)

    Fossum, Eric R.; Nakamura, Junichi; Kemeny, Sabrina E.

    1996-01-01

    Experimental complementary metal-oxide/semiconductor (CMOS) active-pixel image sensor integrated circuit features simple floating-gate structure, with metal-oxide/semiconductor field-effect transistor (MOSFET) as active circuit element in each pixel. Provides flexibility of readout modes, no kTC noise, and relatively simple structure suitable for high-density arrays. Features desirable for "smart sensor" applications.

  3. Vibrations of a floating beam on marine waves

    SciTech Connect

    Sabaneev, Valentin S.; Tovstik, Petr E.; Tovstik, Tatiana M.; Shekhovtsov, Alexei S.

    2015-03-10

    Vertical vibrations of a floating pipe-concrete beam caused by a harmonic waves excitation are studied. The apparent additional mass of water, resisting force and the velocity of towing are considered. The vibration amplitude and the maximum deformations of concrete, caused by these fluctuations, are calculated.

  4. Hydrodynamic analysis of elastic floating collars in random waves

    NASA Astrophysics Data System (ADS)

    Bai, Xiao-dong; Zhao, Yun-peng; Dong, Guo-hai; Li, Yu-cheng

    2015-06-01

    As the main load-bearing component of fish cages, the floating collar supports the whole cage and undergoes large deformations. In this paper, a mathematical method is developed to study the motions and elastic deformations of elastic floating collars in random waves. The irregular wave is simulated by the random phase method and the statistical approach and Fourier transfer are applied to analyze the elastic response in both time and frequency domains. The governing equations of motions are established by Newton's second law, and the governing equations of deformations are obtained based on curved beam theory and modal superposition method. In order to validate the numerical model of the floating collar attacked by random waves, a series of physical model tests are conducted. Good relationship between numerical simulation and experimental observations is obtained. The numerical results indicate that the transfer function of out-of-plane and in-plane deformations increase with the increasing of wave frequency. In the frequency range between 0.6 Hz and 1.1 Hz, a linear relationship exists between the wave elevations and the deformations. The average phase difference between the wave elevation and out-of-plane deformation is 60° with waves leading and the phase between the wave elevation and in-plane deformation is 10° with waves lagging. In addition, the effect of fish net on the elastic response is analyzed. The results suggest that the deformation of the floating collar with fish net is a little larger than that without net.

  5. Treatment of Aquaculture Wastewater Using Floating Vegetated Mats

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Methods are needed for treating aquaculture wastewater. The goal is to improve wastewater quality sufficiently for it to be recycled to production ponds. One potential method for improving aquaculture wastewater is to use floating vegetation in treatment tanks. Alternatively, potential exists for ...

  6. Free-floating dual-arm robots for space assembly

    NASA Technical Reports Server (NTRS)

    Agrawal, Sunil Kumar; Chen, M. Y.

    1994-01-01

    Freely moving systems in space conserve linear and angular momentum. As moving systems collide, the velocities get altered due to transfer of momentum. The development of strategies for assembly in a free-floating work environment requires a good understanding of primitives such as self motion of the robot, propulsion of the robot due to onboard thrusters, docking of the robot, retrieval of an object from a collection of objects, and release of an object in an object pool. The analytics of such assemblies involve not only kinematics and rigid body dynamics but also collision and impact dynamics of multibody systems. In an effort to understand such assemblies in zero gravity space environment, we are currently developing at Ohio University a free-floating assembly facility with a dual-arm planar robot equipped with thrusters, a free-floating material table, and a free-floating assembly table. The objective is to pick up workpieces from the material table and combine them into prespecified assemblies. This paper presents analytical models of assembly primitives and strategies for overall assembly. A computer simulation of an assembly is developed using the analytical models. The experiment facility will be used to verify the theoretical predictions.

  7. 33 CFR 144.01-10 - Equipment for life floats.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Equipment for life floats. 144.01-10 Section 144.01-10 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OUTER CONTINENTAL SHELF ACTIVITIES LIFESAVING APPLIANCES Manned Platforms § 144.01-10...

  8. 33 CFR 144.01-15 - Alternates for life floats.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Alternates for life floats. 144.01-15 Section 144.01-15 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OUTER CONTINENTAL SHELF ACTIVITIES LIFESAVING APPLIANCES Manned Platforms § 144.01-15...

  9. Design And Testing of The Floating Potential Probe For ISS

    NASA Technical Reports Server (NTRS)

    Hillard, G. Barry; Ferguson, Dale C.

    2001-01-01

    Flight 4A was an especially critical mission for the International Space Station (ISS). For the first time, the high voltage solar arrays generated significant amounts of power and long predicted environmental interactions (high negative floating potential and concomitant dielectric charging) became serious concerns. Furthermore, the same flight saw the Plasma Contacting Unit (PCU) deployed and put into operation to mitigate and control these effects. The ISS program office has recognized the critical need to verify, by direct measurement, that ISS does not charge to unacceptable levels. A Floating Potential Probe (FPP) was therefore deployed on ISS to measure ISS floating potential relative to the surrounding plasma and to measure relevant plasma parameters. The primary objective of FPP is to verify that ISS floating potential does not exceed the specified level of 40 volts with respect to the ambient. Since it is expected that in normal operations the PCU will maintain ISS within this specification, it is equivalent to say that the objective of FPP is to monitor the functionality of the PCU. In this paper, we report on the design and testing of the ISS FPP. In a separate paper, the operations and results obtained so far by the FPP will be presented.

  10. Development and evaluation of gastroretentive norfloxacin floating tablets.

    PubMed

    Bomma, Ramesh; Swamy Naidu, Rongala Appala; Yamsani, Madhusudan Rao; Veerabrahma, Kishan

    2009-06-01

    Floating matrix tablets of norfloxacin were developed to prolong gastric residence time, leading to an increase in drug bioavailability. Tablets were prepared by the wet granulation technique, using polymers such as hydroxypropyl methylcellulose (HPMC K4M, HPMC K100M) and xanthan gum. Tablets were evaluated for their physical characteristics, viz., hardness, thickness, friability, and mass variation, drug content and floating properties. Further, tablets were studied for in vitro drug release characteristics for 9 hours. The tablets exhibited controlled and prolonged drug release profiles while floating over the dissolution medium. Non-Fickian diffusion was confirmed as the drug release mechanism from these tablets, indicating that water diffusion and polymer rearrangement played an essential role in drug release. The best formulation (F4) was selected based on in vitro characteristics and was used in vivo radiographic studies by incorporating BaSO4. These studies revealed that the tablets remained in the stomach for 180 +/- 30 min in fasting human volunteers and indicated that gastric retention time was increased by the floating principle, which was considered desirable for the absorption window drugs.

  11. Children's Typically-Perceived-Situations of Floating and Sinking

    ERIC Educational Resources Information Center

    Joung, Yong Jae

    2009-01-01

    The purpose of this study is to explore children's typically-perceived-situations (TPS) of "floating" and "sinking". TPS refers to the situation rising spontaneously in an individual's mind when they first think of a phenomenon or concept. Data were collected from 148 Year 5 Korean children. As a result of analysing the data…

  12. 40 CFR 65.44 - External floating roof (EFR).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ...)(2)(iv) of this section, the primary seal shall be either a metallic shoe seal or a liquid-mounted seal. (iii) If the external floating roof is equipped with a liquid-mounted or metallic shoe primary... metallic shoe primary seal in paragraph (a)(2)(ii) of this section does not apply until the next time...

  13. 40 CFR 65.44 - External floating roof (EFR).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...)(2)(iv) of this section, the primary seal shall be either a metallic shoe seal or a liquid-mounted seal. (iii) If the external floating roof is equipped with a liquid-mounted or metallic shoe primary... metallic shoe primary seal in paragraph (a)(2)(ii) of this section does not apply until the next time...

  14. 27. Detail view of mechanical float gages used to monitor ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    27. Detail view of mechanical float gages used to monitor level of water in the filtration bed reservoir. Gage on left measures water head, gage on right monitors filtration rate. - Lake Whitney Water Filtration Plant, Filtration Plant, South side of Armory Street between Edgehill Road & Whitney Avenue, Hamden, New Haven County, CT

  15. Formulation and evaluation of floating matrix tablet of stavudine

    PubMed Central

    Prajapati, Pankaj H; Nakum, Vijay V; Patel, Chhagan N

    2012-01-01

    Background/Aim: The purpose of the study was to prolong the gastric residence time of stavudine by designing its floating tablets and to study the influence of different polymers on its release rate. Materials and Methods: The floating mix matrix tablets of stavudine were prepared by melt granulation method. Beeswax was used as hydrophobic meltable material. Hydroxypropyl methylcellulose (HPMC), sodium bicarbonate, and ethyl cellulose were used as matrixing agent, gas generating agent, and floating enhancer, respectively. The prepared tablets were evaluated for physicochemical parameters such as hardness, weight variation, friability, floating properties (floating lag time, total floating time), drug content, stability study, and in vitro drug release. The drug- polymer interaction was studied by Differential Scanning Calorimetry (DSC) thermal analysis and Fourier transform infared (FT-IR). Results: The floating lag time of all the formulations was within the prescribed limit (<3 min). All the formulations showed good matrix integrity and retarded the release of drug for 12 h except the formulation F5.The concentration of beeswax (X1), HPMC K4M (X2), and ethyl cellulose (X3) were selected as independent variables and drug release values at 1 (Q1), at 6 (Q6) and at 12 h (Q12) as dependent variables. Formulation F7 was selected as an optimum formulation as it showed more similarity in dissolution profile with theoretical profile (similarity factor, f2 = 70.91). The dissolution of batch F7 can be described by zero-order kinetics (R2 =0.9936) with anomalous (non-Fickian) diffusion as the release mechanism (n=0.545). There was no difference observed in release profile after temperature sensitivity study at 40°C/75% relative humidity (RH) for 1 month. Conclusion: It can be concluded from this study that the combined mix matrix system containing hydrophobic and hydrophilic polymer minimized the burst release of drug from the tablet and achieved a drug release by zero

  16. Project of universal DSP platform: cluster of floating point DSP processors

    NASA Astrophysics Data System (ADS)

    Dymanowski, Łukasz; Lewandowski, Kamil; Linczuk, Maciej

    2009-06-01

    In this paper, a project of cluster of DSP is presented. This project is realized as a extended card for PC computers. A block diagram of a board was described. A DSP processor properties for cluster computation was described. A block diagram of the board was discussed. Next, a details of hardware realization of this card was described. The PCB project was discussed. A details of multi-layers board was described.

  17. Technology Development and Circuit Design for a Parallel Laser Programmable Floating Point Application Specific Processor

    DTIC Science & Technology

    1989-12-01

    select adder because the carry select adder is the largest consumer of the propagation delay through the adder. The result of the analysis of the carry ...multiplexed adder is the product of a three step evolution from the carry - select adder . The first step hierarchically expanded the idea of the carry - select adder into...select-type adder where the each ripple adder of the carry-select is expanded into a carry - select adder .

  18. Gigaflop (billion floating point operations per second) performance for computational electromagnetics

    NASA Technical Reports Server (NTRS)

    Shankar, V.; Rowell, C.; Hall, W. F.; Mohammadian, A. H.; Schuh, M.; Taylor, K.

    1992-01-01

    Accurate and rapid evaluation of radar signature for alternative aircraft/store configurations would be of substantial benefit in the evolution of integrated designs that meet radar cross-section (RCS) requirements across the threat spectrum. Finite-volume time domain methods offer the possibility of modeling the whole aircraft, including penetrable regions and stores, at longer wavelengths on today's gigaflop supercomputers and at typical airborne radar wavelengths on the teraflop computers of tomorrow. A structured-grid finite-volume time domain computational fluid dynamics (CFD)-based RCS code has been developed at the Rockwell Science Center, and this code incorporates modeling techniques for general radar absorbing materials and structures. Using this work as a base, the goal of the CFD-based CEM effort is to define, implement and evaluate various code development issues suitable for rapid prototype signature prediction.

  19. Functional Specification and Simulation of a Floating Point Co-Processor for SPUR

    DTIC Science & Technology

    1986-08-01

    phase. The clock phases themselves are derived from a special node called masterclock which is guaranteed by Slang to be the first event scheduled...in each evaluation sequence. The function of the masterclock node is programmer definable; here it is a mod 4 counter which is then decoded into four

  20. Experimental Wave Tank Test for Reference Model 3 Floating-Point Absorber Wave Energy Converter Project

    SciTech Connect

    Yu, Y. H.; Lawson, M.; Li, Y.; Previsic, M.; Epler, J.; Lou, J.

    2015-01-01

    The U.S. Department of Energy established a reference model project to benchmark a set of marine and hydrokinetic technologies including current (tidal, open-ocean, and river) turbines and wave energy converters. The objectives of the project were to first evaluate the status of these technologies and their readiness for commercial applications. Second, to evaluate the potential cost of energy and identify cost-reduction pathways and areas where additional research could be best applied to accelerate technology development to market readiness.

  1. Horizontal mixing in the Southern Ocean from Argo float trajectories

    NASA Astrophysics Data System (ADS)

    Roach, Christopher J.; Balwada, Dhruv; Speer, Kevin

    2016-08-01

    We provide the first observational estimate of the circumpolar distribution of cross-stream eddy diffusivity at 1000 m in the Southern Ocean using Argo float trajectories. We show that Argo float trajectories, from the float surfacing positions, can be used to estimate lateral eddy diffusivities in the ocean and that these estimates are comparable to those obtained from RAFOS floats, where they overlap. Using the Southern Ocean State Estimate (SOSE) velocity fields to advect synthetic particles with imposed behavior that is "Argo-like" and "RAFOS-like" diffusivity estimates from both sets of synthetic particles agreed closely at the three dynamically very different test sites, the Kerguelen Island region, the Southeast Pacific Ocean, and the Scotia Sea, and support our approach. Observed cross-stream diffusivities at 1000 m, calculated from Argo float trajectories, ranged between 300 and 2500 m2 s-1, with peaks corresponding to topographic features associated with the Scotia Sea, the Kerguelen Plateau, the Campbell Plateau, and the Southeast Pacific Ridge. These observational estimates agree with previous regional estimates from the Diapycnal and Isopycnal Mixing Experiment in the Southern Ocean (DIMES) near the Drake Passage, and other estimates from natural tracers (helium), inverse modeling studies, and current meter measurements. These estimates are also compared to the suppressed eddy diffusivity in the presence of mean flows. The comparison suggests that away from regions of strong topographic steering suppression explains both the structure and magnitude of eddy diffusivity but that eddy diffusivities in the regions of topographic steering are greater than what would be theoretically expected and the ACC experiences localized enhanced cross-stream mixing in these regions.

  2. SEMICONDUCTOR DEVICES: Modeling and discussion of threshold voltage for a multi-floating gate FET pH sensor

    NASA Astrophysics Data System (ADS)

    Zhaoxia, Shi; Dazhong, Zhu

    2009-11-01

    Research into new pH sensors fabricated by the standard CMOS process is currently a hot topic. The new pH sensing multi-floating gate field effect transistor is found to have a very large threshold voltage, which is different from the normal ion-sensitive field effect transistor. After analyzing all the interface layers of the structure, a new sensitive model based on the Gauss theorem and the charge neutrality principle is created in this paper. According to the model, the charge trapped on the multi-floating gate during the process and the thickness of the sensitive layer are the main causes of the large threshold voltage. From this model, it is also found that removing the charge on the multi-floating gate is an effective way to decrease the threshold voltage. The test results for three different standard pH buffer solutions show the correctness of the model and point the way to solve the large threshold problem.

  3. Ability of floating platforms and tankers to operate in the Hibernia environment

    SciTech Connect

    Mcintyre, N.F.

    1981-01-01

    The ability of floating platforms and tankers to operate in the Hibernia environment is discussed. The basic environmental difference between the fixed and floating concept is that the floating systems are unable to withstand impact from heavy ice floes or large icebergs. Therefore, they are designed to utilize safe, reliable quick-disconnect systems, which permit them to evacuate the area when encroaching ice presents a potential hazard. Floating production systems being considered for Hibernia involve ship-type vessels, conventional semisubmersibles, and some form of floating storage and loading facility.

  4. Analysis of an Anomaly: The Increase in Time Float following Consumption

    PubMed Central

    Qi, Jianxun; Su, Zhixiong

    2014-01-01

    One fundamental axiom for project plan and schedule relates to the notion that time float will be reduced following its consumption. However, an anomalous scenario can emerge in which an activity's time float increases following its consumption. By exploring the associations between time float and paths in activity networks, we (a) reveal the conditions under which the anomaly occurs and (b) summarize laws related to total float. An activity's total float increases in parallel with its duration prolongation within a given boundary but remains constant or decreases in parallel with a prolongation outside the boundary. Furthermore, whereas a prolongation of an activity's duration in excess of classic total float does not delay project completion time, a lag of its start time to a degree slightly greater than the total float does. This analysis reveals different types of total float that correspond to different ways of usage. From this, we offer definitions for translation total float and prolongation total float that deviate from traditional conventions regarding the uniqueness of total float. PMID:25250376

  5. Designs and applications for floating-hydro power systems in small streams

    SciTech Connect

    Rehder, J.B.

    1983-01-01

    The project focuses on an appropriate technology for small-scale hydro power: floating waterwheels and turbines. For background, relic and existing systems such as early floating mills, traditional Amish waterwheels, and micro-hydro systems are examined. In the design phase of the project, new designs for Floating Hydro Power Systems include: an analysis of floatation materials and systems; a floating undershot waterwheel design; a floating cylinder (fiberglass storage tank) design; a submerged tube design; and a design for a floating platform with submerged propellers. Finally, in the applications phase, stream flow data from East Tennessee streams are used in a discussion of the potential applications of floating hydro power systems in small streams.

  6. Characterization of cement float buoyancy in the stalked barnacle Dosima fascicularis (Crustacea, Cirripedia).

    PubMed

    Zheden, Vanessa; Kovalev, Alexander; Gorb, Stanislav N; Klepal, Waltraud

    2015-02-06

    Dosima fascicularis is the only barnacle which can drift autonomously at the water surface with a foam-like cement float. The cement secreted by the animal contains numerous gas-filled cells of different size. When several individuals share one float, their size and not their number is crucial for the production of both volume and mass of the float. The gas content within the cells of the foam gives positive static buoyancy to the whole float. The volume of the float, the gas volume and the positive static buoyancy are positively correlated. The density of the cement float without gas is greater than that of seawater. This study shows that the secreted cement consists of more than 90% water and the gas volume is on average 18.5%. Our experiments demonstrate that the intact foam-like cement float is sealed to the surrounding water.

  7. Method and apparatus for high speed data acquisition and processing

    DOEpatents

    Ferron, John R.

    1997-01-01

    A method and apparatus for high speed digital data acquisition. The apparatus includes one or more multiplexers for receiving multiple channels of digital data at a low data rate and asserting a multiplexed data stream at a high data rate, and one or more FIFO memories for receiving data from the multiplexers and asserting the data to a real time processor. Preferably, the invention includes two multiplexers, two FIFO memories, and a 64-bit bus connecting the FIFO memories with the processor. Each multiplexer receives four channels of 14-bit digital data at a rate of up to 5 MHz per channel, and outputs a data stream to one of the FIFO memories at a rate of 20 MHz. The FIFO memories assert output data in parallel to the 64-bit bus, thus transferring 14-bit data values to the processor at a combined rate of 40 MHz. The real time processor is preferably a floating-point processor which processes 32-bit floating-point words. A set of mask bits is prestored in each 32-bit storage location of the processor memory into which a 14-bit data value is to be written. After data transfer from the FIFO memories, mask bits are concatenated with each stored 14-bit data value to define a valid 32-bit floating-point word. Preferably, a user can select any of several modes for starting and stopping direct memory transfers of data from the FIFO memories to memory within the real time processor, by setting the content of a control and status register.

  8. Method and apparatus for high speed data acquisition and processing

    DOEpatents

    Ferron, J.R.

    1997-02-11

    A method and apparatus are disclosed for high speed digital data acquisition. The apparatus includes one or more multiplexers for receiving multiple channels of digital data at a low data rate and asserting a multiplexed data stream at a high data rate, and one or more FIFO memories for receiving data from the multiplexers and asserting the data to a real time processor. Preferably, the invention includes two multiplexers, two FIFO memories, and a 64-bit bus connecting the FIFO memories with the processor. Each multiplexer receives four channels of 14-bit digital data at a rate of up to 5 MHz per channel, and outputs a data stream to one of the FIFO memories at a rate of 20 MHz. The FIFO memories assert output data in parallel to the 64-bit bus, thus transferring 14-bit data values to the processor at a combined rate of 40 MHz. The real time processor is preferably a floating-point processor which processes 32-bit floating-point words. A set of mask bits is prestored in each 32-bit storage location of the processor memory into which a 14-bit data value is to be written. After data transfer from the FIFO memories, mask bits are concatenated with each stored 14-bit data value to define a valid 32-bit floating-point word. Preferably, a user can select any of several modes for starting and stopping direct memory transfers of data from the FIFO memories to memory within the real time processor, by setting the content of a control and status register. 15 figs.

  9. Conceptual Design of Navy Floating Pier.

    DTIC Science & Technology

    1982-09-01

    in. A single point mooring system permanently anchors the structure. In 1981, a smaller concrete barge was built In Singapore and towed to Mexico . The...Ul CMINC-$ zee :;7 ,s: S. 1,- -1- 1f No. tONON6 100-14-- &. - I.Z3 Firf A ~~ (Z4.00),.14M - ro*ax % rp z o3- r-z N~~~I- T=1,06- -4z -5 F -’-’TWWCTUIEA L

  10. A new system for observing solar oscillations at the Mount Wilson Observatory. I - System design and installation

    NASA Technical Reports Server (NTRS)

    Rhodes, E. J., Jr.; Howard, R. F.; Ulrich, R. K.; Smith, E. J.

    1983-01-01

    An observation system designed to obtain daily measurements of solar photospheric and subphotospheric rotational velocities, from the frequency splitting of nonradial solar p-mode oscillations of degree greater than 150, is nearing completion of the Mount Wilson Observatory. The system will combine a 244 x 248 pixel CID camera with a high speed floating point array processor, a 32-bit minicomputer, and a large capacity disk storage system. These components will be integrated into the spectrograph of the 60-foot solar tower telescope at Mount Wilson.

  11. Experimental Results: Detection and Tracking of Low SNR Sinusoids Using Real-Time LMS and RLS Lattice Adaptive Line Enhancers.

    DTIC Science & Technology

    1991-08-01

    DETECTION AND TRACKING OF LOW SNR SINUSOIDS USING REAL-TIMNE LMS AND RI S LATTIICE, ADAPTIVE LINE PR: SSWh ENHANCRS RE: 0300000liN 6 AIJTHCRISI WVl: D68...RESULTS: DETECTION AND TRACKING OF LOW SNR SINUSOIDS USING REAL-TIME LMS AND RLS LATTICE ADAPTIVE LINE ENHANCERS i f. Terence R. Albert, Hana Abusalem...obtained from a real-time custom hardware SNR sinusoids and filter parameters such as system using 32-bit IEEE floating point filter length, and adaption

  12. Proton production, neutralisation and reduction in a floating water bridge

    NASA Astrophysics Data System (ADS)

    Sammer, Martina; Wexler, Adam D.; Kuntke, Philipp; Wiltsche, Helmar; Stanulewicz, Natalia; Lankmayr, Ernst; Woisetschläger, Jakob; Fuchs, Elmar C.

    2015-10-01

    This work reports on proton production, transport, reduction and neutralization in floating aqueous bridges under the application of a high dc voltage (‘floating water bridge’). Recently possible mechanisms for proton transfer through the bridge were suggested. In this work we visualize and describe the production of protons in the anolyte and their neutralization in the catholyte. Apart from that, protons are reduced to hydrogen due to electrolysis. Microbubbles are detached instantly, due to the electrohydrodynamic flow at the electrode surface. No larger, visible bubbles are formed and the system degasses through the bridge due to its higher local temperature. A detailed analysis of trace elements originating from beaker material, anode or the atmosphere is presented, showing that their influence on the overall conduction compared to the contribution of protons is negligible. Finally, an electrochemical rationale of high voltage electrolysis of low ionic strength solutions is presented.

  13. Floating Marine Debris in waters of the Mexican Central Pacific.

    PubMed

    Díaz-Torres, Evelyn R; Ortega-Ortiz, Christian D; Silva-Iñiguez, Lidia; Nene-Preciado, Alejandro; Orozco, Ernesto Torres

    2017-02-15

    The presence of marine debris has been reported recently in several oceans basins; there is very little information available for Mexican Pacific coasts, however. This research examined the composition, possible sources, distribution, and density of Floating Marine Debris (FMD) during nine research surveys conducted during 2010-2012 in the Mexican Central Pacific (MCP). Of 1820 floating objects recorded, 80% were plastic items. Sources of FMD were determined using key objects, which indicated that the most were related to the presence of the industrial harbor and of a growing fishing industry in the study area. Densities were relatively high, ranging from 40 to 2440objects/km(2); the highest densities were recorded in autumn. FMD were distributed near coastal regions, mainly in Jalisco, influenced by river outflow and surface currents. Our results seem to follow worldwide trends and highlight the need for further studies on potential ecological impacts within coastal waters of the MCP.

  14. A floating water bridge produces water with excess charge

    NASA Astrophysics Data System (ADS)

    Fuchs, Elmar C.; Sammer, Martina; Wexler, Adam D.; Kuntke, Philipp; Woisetschläger, Jakob

    2016-03-01

    Excess positive and negative Bjerrum-defect like charge (protonic and ‘aterprotonic’, from ancient Greek ἄ'τɛρ, ‘without’) in anolyte and catholyte of high voltage electrolysis of highly pure water was found during the so-called ‘floating water bridge’ experiment. The floating water bridge is a special case of an electrohydrodynamic liquid bridge and constitutes an intriguing phenomenon that occurs when a high potential difference (~kV cm-1) is applied between two beakers of water. To obtain such results impedance spectroscopy was used. This measurement technique allows the depiction and simulation of complex aqueous systems as simple electric circuits. In the present work we show that there is an additional small contribution from the difference in conductivity between anolyte and catholyte which cannot be measured with a conductivity meter, but is clearly visible in an impedance spectrum.

  15. Solution processed molecular floating gate for flexible flash memories

    PubMed Central

    Zhou, Ye; Han, Su-Ting; Yan, Yan; Huang, Long-Biao; Zhou, Li; Huang, Jing; Roy, V. A. L.

    2013-01-01

    Solution processed fullerene (C60) molecular floating gate layer has been employed in low voltage nonvolatile memory device on flexible substrates. We systematically studied the charge trapping mechanism of the fullerene floating gate for both p-type pentacene and n-type copper hexadecafluorophthalocyanine (F16CuPc) semiconductor in a transistor based flash memory architecture. The devices based on pentacene as semiconductor exhibited both hole and electron trapping ability, whereas devices with F16CuPc trapped electrons alone due to abundant electron density. All the devices exhibited large memory window, long charge retention time, good endurance property and excellent flexibility. The obtained results have great potential for application in large area flexible electronic devices. PMID:24172758

  16. Quantitative Comparison of the Responses of Three Floating Platforms

    SciTech Connect

    Jonkman, J.; Matha, D.

    2010-03-01

    This report presents a comprehensive dynamic-response analysis of three offshore floating wind turbine concepts. Models were composed of one 5-MW turbine supported on land and three 5-MW turbines located offshore on a tension leg platform, a spar buoy, and a barge. A loads and stability analysis adhering to the procedures of international design standards was performed for each model using the fully coupled time-domain aero-hydro-servo-elastic design code FAST with AeroDyn and HydroDyn. The concepts are compared based on the calculated ultimate loads, fatigue loads, and instabilities. The results of this analysis will help resolve the fundamental design trade-offs between the floating-system concepts.

  17. Contactless heater floating zone refining and crystal growth

    NASA Technical Reports Server (NTRS)

    Kou, Sindo (Inventor); Lan, Chung-Wen (Inventor)

    1993-01-01

    Floating zone refining or crystal growth is carried out by providing rapid relative rotation of a feed rod and finish rod while providing heat to the junction between the two rods so that significant forced convection occurs in the melt zone between the two rods. The forced convection distributes heat in the melt zone to allow the rods to be melted through with a much shorter melt zone length than possible utilizing conventional floating zone processes. One of the rods can be rotated with respect to the other, or both rods can be counter-rotated, with typical relative rotational speeds of the rods ranging from 200 revolutions per minute (RPM) to 400 RPM or greater. Zone refining or crystal growth is carried out by traversing the melt zone through the feed rod.

  18. Floating and flying ferrofluid bridges induced by external magnetic fields

    NASA Astrophysics Data System (ADS)

    Ma, Rongchao; Zhou, Yixin; Liu, Jing

    2015-04-01

    A ferrofluid is a mixture that exhibits both magnetism and fluidity. This merit enables the ferrofluid to be used in a wide variety of areas. Here we show that a floating ferrofluid bridge can be induced between two separated boards under a balanced external magnetic field generated by two magnets, while a flying ferrofluid bridge can be induced under an unbalanced external magnetic field generated by only one magnet. The mechanisms of the ferrofluid bridges were discussed and the corresponding mathematical equations were also established to describe the interacting magnetic force between the ferro particles inside the ferrofluid. This work answered a basic question that, except for the well-known floating water bridges that are related to electricity, one can also build up a liquid bridge that is related to magnetism.

  19. Construction of Control System for Floating High Energy Capacitors

    NASA Astrophysics Data System (ADS)

    Tobin, Zachary; Bellan, Paul

    2011-10-01

    The circuitry for the Caltech magnetic reconnection experiment under construction requires two independent floating high energy capacitor power supplies to create linked plasma loops. This project requires the building of systems for controlling plasma generation, including timing circuitry to control the sequences of operation. Unlike with previous designs, timing functions are completely contained on a single printed circuit board. This allows the design to be easily replicated for use with the multiple independent capacitor involved. The timing circuitry first activates a high voltage power supply, then connects the power supply to the capacitor, and then disconnects the power supply so that the charged capacitor is floating. The circuitry then sends out a ``ready'' signal to a sequencer, which sequentially triggers the gas puff valves, bias magnetic field supply, and ignitron switch for the capacitor. The control circuit sequencing has been tested successfully with the capacitor discharging into a dummy load.

  20. Topsides equipment, operating flexibility key floating LNG design

    SciTech Connect

    Yost, K.; Lopez, R.; Mok, J.

    1998-03-09

    Use of a large-scale floating liquefied natural gas (LNG) plant is an economical alternative to an onshore plant for producing from an offshore field. Mobil Technology Co., Dallas, has advanced a design for such a plant that is technically feasible, economical, safe, and reliable. Presented were descriptions of the general design basis, hull modeling and testing, topsides and storage layouts, and LNG offloading. But such a design also presents challenges for designing topsides equipment in an offshore environment and for including flexibility and safety. These are covered in this second article. Mobil`s floating LNG plant design calls for a square concrete barge with a moon-pool in the center. It is designed to produce 6 million tons/year of LNG with up to 55,000 b/d of condensate from 1 bcfd of raw feed gas.

  1. Removal of floating dust in glow discharge using plasma jet

    SciTech Connect

    Ticos, C. M.; Jepu, I.; Lungu, C. P.; Chiru, P.; Zaroschi, V.; Lungu, A. M.

    2010-07-05

    Dust can be an inconvenient source of impurities in plasma processing reactors and in many cases it can cause damage to the plasma-treated surfaces. A technique for dust expulsion out of the trapping region in plasma is presented here, based on the wind force exerted on dust particles by a pulsed plasma jet. Its applicability is demonstrated by removing floating dust in the sheath of parallel-plate capacitive radio-frequency plasma.

  2. Classification and certification requirements for floating production systems

    SciTech Connect

    Bowie, R.D.; Richardson, K.L.

    1995-12-31

    Floating Production Systems (FPSs) can be either, custom built or a converted semi-submersible, tanker or barge. The paper describes the necessary steps to be taken for the Classification and Certification of FPSs and FPSOS. The paper outlines the latest Classification and certification requirements for both semi-submersible and ship type FPSS. Classification and regulatory requirements for the Hull Structure, Stability, Station Keeping, Shipboard and Production Systems are discussed.

  3. Field Experiences with Floating Breakwaters in the Eastern United States.

    DTIC Science & Technology

    1982-07-01

    7AD-AL ’b76 MARINE RESOURCE MANAGEMENT INC CAMBRIDGE MA FIG 1 3/2 FIELD EXPERIENCES WITH FLOATING BREAKWATERS IN THE EASTERN UNIT--ETC(U) JUL 82 A...Resource Management , Inc. 12 Arrow Street [31679 Cambridge, Massachusetts 02138 If. CONTROLLING OFFICE NAME AND ADDRESS 12. REPORT DATE Department of the...Development. The report was prepared by Andrew V. Baird, Marine Resource Management , Inc., Cambridge, Massachusetts, and Neil W. Ross, who provided

  4. A big floating thrombus in the common carotid artery.

    PubMed

    La Spada, Michele; Stilo, Francesco; Barillà, David; Spinelli, Francesco

    2011-11-01

    The management of the free-floating thrombus (FFT) is difficult, and it is unclear whether surgical or medical treatment is superior. The common carotid artery is rarely involved. An 80-year-old woman presented with right hand weakness and syncope. Ultrasound showed the presence of FFT in the left common carotid artery. A carotid endarterectomy with Dacron patch angioplasty was immediately performed without complications. In the presence of symptoms, the interventional management of FFT is advised.

  5. Floated pallet definition study. Volume 4: Summary volume

    NASA Technical Reports Server (NTRS)

    1975-01-01

    The conceptual design of a suspension system for the Floated Pallet and a retention system to support the pallet during launch, maneuvering and descent are described. In addition, a control moment gyroscope support equipment configuration study including installation and an experiment mount and erection study was performed. The impact of these separate hardware studies on the existing pallet configuration was assessed and a modified pallet common module defined.

  6. Floating Potential Probe Langmuir Probe Data Reduction Results

    NASA Technical Reports Server (NTRS)

    Morton, Thomas L.; Minow, Joseph I.

    2002-01-01

    During its first five months of operations, the Langmuir Probe on the Floating Potential Probe (FPP) obtained data on ionospheric electron densities and temperatures in the ISS orbit. In this paper, the algorithms for data reduction are presented, and comparisons are made of FPP data with ground-based ionosonde and Incoherent Scattering Radar (ISR) results. Implications for ISS operations are detailed, and the need for a permanent FPP on ISS is examined.

  7. Apollo 10 spacecraft with Navy swimmers floating in recovery area

    NASA Technical Reports Server (NTRS)

    1969-01-01

    The Apollo 10 spacecraft, with Astronauts Stafford, Young, and Cernan still inside, floats in the South Pacific immediately after touchdown. U.S. Navy underwater demolition team swimmers assist in the recovery operations. Splashdown occurred at 11:53 a.m., May 26, 1969, about 400 miles east of American Samoa. Note that in this photo the divers have attached a flotation collar to the spacecraft.

  8. Cascade Analysis of a Floating Wind Turbine Rotor

    NASA Astrophysics Data System (ADS)

    Eliassen, Lene; Jakobsen, Jasna B.; Knauer, Andreas; Nielsen, Finn Gunnar

    2014-12-01

    Mounting a wind turbine on a floating foundation introduces more complexity to the aerodynamic loading. The floater motion contains a wide range of frequencies. To study some of the basic dynamic load effect on the blades due to these motions, a two-dimensional cascade approach, combined with a potential vortex method, is used. This is an alternative method to study the aeroelastic behavior of wind turbines that is different from the traditional blade element momentum method. The analysis tool demands little computational power relative to a full three dimensional vortex method, and can handle unsteady flows. When using the cascade plane, a "cut" is made at a section of the wind turbine blade. The flow is viewed parallel to the blade axis at this cut. The cascade model is commonly used for analysis of turbo machineries. Due to the simplicity of the code it requires little computational resources, however it has limitations in its validity. It can only handle two-dimensional potential flow, i.e. including neither three-dimensional effects, such as the tip loss effect, nor boundary layers and stall effects are modeled. The computational tool can however be valuable in the overall analysis of floating wind turbines, and evaluation of the rotor control system. A check of the validity of the vortex panel code using an airfoil profile is performed, comparing the variation of the lift force, to the theoretically derived Wagner function. To analyse the floating wind turbine, a floating structure with hub height 90 m is chosen. An axial motion of the rotor is considered.

  9. Classifying Floating Potential Measurement Unit Data Products as Science Data

    NASA Technical Reports Server (NTRS)

    Coffey, Victoria; Minow, Joseph

    2015-01-01

    We are Co-Investigators for the Floating Potential Measurement Unit (FPMU) on the International Space Station (ISS) and members of the FPMU operations and data analysis team. We are providing this memo for the purpose of classifying raw and processed FPMU data products and ancillary data as NASA science data with unrestricted, public availability in order to best support science uses of the data.

  10. Finescale Water-Mass Variability from ARGO Profiling Floats

    DTIC Science & Technology

    2015-09-30

    1 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Finescale Water -Mass Variability from ARGO Profiling...assessment of water -mass (aka thermohaline or spice) variability as a measure of stirring along isopycnals, as well as density ratio Rρ statistics, from the...global ARGO profiling float data set. APPROACH For the water -mass analysis, the profile data is transformed onto σθ density coordinates

  11. Matched filter based detection of floating mines in IR spacetime

    NASA Astrophysics Data System (ADS)

    Borghgraef, Alexander; Lapierre, Fabian; Philips, Wilfried; Acheroy, Marc

    2009-09-01

    Ship-based automatic detection of small floating objects on an agitated sea surface remains a hard problem. Our main concern is the detection of floating mines, which proved a real threat to shipping in confined waterways during the first Gulf War, but applications include salvaging,search-and-rescue and perimeter or harbour defense. IR video was chosen for its day-and-night imaging capability, and its availability on military vessels. Detection is difficult because a rough sea is seen as a dynamic background of moving objects with size order, shape and temperature similar to those of the floating mine. We do find a determinant characteristic in the target's periodic motion, which differs from that of the propagating surface waves composing the background. The classical detection and tracking approaches give bad results when applied to this problem. While background detection algorithms assume a quasi-static background, the sea surface is actually very dynamic, causing this category of algorithms to fail. Kalman or particle filter algorithms on the other hand, which stress temporal coherence, suffer from tracking loss due to occlusions and the great noise level of the image. We propose an innovative approach. This approach uses the periodicity of the objects movement and thus its temporal coherence. The principle is to consider the video data as a spacetime volume similar to a hyperspectral data cube by replacing the spectral axis with a temporal axis. We can then apply algorithms developed for hyperspectral detection problems to the detection of small floating objects. We treat the detection problem using multilinear algebra, designing a number of finite impulse response filters (FIR) maximizing the target response. The algorithm was applied to test footage of practice mines in the infrared.

  12. Software For Tie-Point Registration Of SAR Data

    NASA Technical Reports Server (NTRS)

    Rignot, Eric; Dubois, Pascale; Okonek, Sharon; Van Zyl, Jacob; Burnette, Fred; Borgeaud, Maurice

    1995-01-01

    SAR-REG software package registers synthetic-aperture-radar (SAR) image data to common reference frame based on manual tie-pointing. Image data can be in binary, integer, floating-point, or AIRSAR compressed format. For example, with map of soil characteristics, vegetation map, digital elevation map, or SPOT multispectral image, as long as user can generate binary image to be used by tie-pointing routine and data are available in one of the previously mentioned formats. Written in FORTRAN 77.

  13. Fixed-point image orthorectification algorithms for reduced computational cost

    NASA Astrophysics Data System (ADS)

    French, Joseph Clinton

    Imaging systems have been applied to many new applications in recent years. With the advent of low-cost, low-power focal planes and more powerful, lower cost computers, remote sensing applications have become more wide spread. Many of these applications require some form of geolocation, especially when relative distances are desired. However, when greater global positional accuracy is needed, orthorectification becomes necessary. Orthorectification is the process of projecting an image onto a Digital Elevation Map (DEM), which removes terrain distortions and corrects the perspective distortion by changing the viewing angle to be perpendicular to the projection plane. Orthorectification is used in disaster tracking, landscape management, wildlife monitoring and many other applications. However, orthorectification is a computationally expensive process due to floating point operations and divisions in the algorithm. To reduce the computational cost of on-board processing, two novel algorithm modifications are proposed. One modification is projection utilizing fixed-point arithmetic. Fixed point arithmetic removes the floating point operations and reduces the processing time by operating only on integers. The second modification is replacement of the division inherent in projection with a multiplication of the inverse. The inverse must operate iteratively. Therefore, the inverse is replaced with a linear approximation. As a result of these modifications, the processing time of projection is reduced by a factor of 1.3x with an average pixel position error of 0.2% of a pixel size for 128-bit integer processing and over 4x with an average pixel position error of less than 13% of a pixel size for a 64-bit integer processing. A secondary inverse function approximation is also developed that replaces the linear approximation with a quadratic. The quadratic approximation produces a more accurate approximation of the inverse, allowing for an integer multiplication calculation

  14. Floating ice-algal aggregates below melting arctic sea ice.

    PubMed

    Assmy, Philipp; Ehn, Jens K; Fernández-Méndez, Mar; Hop, Haakon; Katlein, Christian; Sundfjord, Arild; Bluhm, Katrin; Daase, Malin; Engel, Anja; Fransson, Agneta; Granskog, Mats A; Hudson, Stephen R; Kristiansen, Svein; Nicolaus, Marcel; Peeken, Ilka; Renner, Angelika H H; Spreen, Gunnar; Tatarek, Agnieszka; Wiktor, Jozef

    2013-01-01

    During two consecutive cruises to the Eastern Central Arctic in late summer 2012, we observed floating algal aggregates in the melt-water layer below and between melting ice floes of first-year pack ice. The macroscopic (1-15 cm in diameter) aggregates had a mucous consistency and were dominated by typical ice-associated pennate diatoms embedded within the mucous matrix. Aggregates maintained buoyancy and accumulated just above a strong pycnocline that separated meltwater and seawater layers. We were able, for the first time, to obtain quantitative abundance and biomass estimates of these aggregates. Although their biomass and production on a square metre basis was small compared to ice-algal blooms, the floating ice-algal aggregates supported high levels of biological activity on the scale of the individual aggregate. In addition they constituted a food source for the ice-associated fauna as revealed by pigments indicative of zooplankton grazing, high abundance of naked ciliates, and ice amphipods associated with them. During the Arctic melt season, these floating aggregates likely play an important ecological role in an otherwise impoverished near-surface sea ice environment. Our findings provide important observations and measurements of a unique aggregate-based habitat during the 2012 record sea ice minimum year.

  15. Characterization of floating element balance for field panel testing

    NASA Astrophysics Data System (ADS)

    Hunsucker, J. Travis; Gardner, Harrison; Swain, Geoffrey

    2015-11-01

    Multiple experiments were performed to investigate and characterize the uncertainty and bias of a through-hull flush mounted floating element balance designed to measure the hydrodynamic drag forces of biofouling and marine coatings on 25 x 30 cm test panels. The instrument is located in a wet well on the aft portion of a 27' Chris Craft Commander. Testing occurs over a series of speeds ranging from a Froude number of 0.50-2.20 on calm days (force 3 or less) in waters along the central east coast of Florida. Recent modifications have been made to the instrumentation in an effort to improve the overall accuracy of the system. This study compares frictional drag measurements of the floating element balance to those obtained using the Clauser chart and Preston tube methods for a smooth surface. Boundary layer velocity profiles are examined to understand the nature of the flow over the testing section. Roughness function values for 60 and 220 grit sandpaper were calculated from data obtained using the floating element balance. These values were compared with previous work to examine the overall bias of the methodology. Repeat measurements for a smooth panel were analyzed to characterize the overall uncertainty in the system. This research was supported by the Office of Naval Research under grants N00014-10-1-0919 and N00014-11-1-0915.

  16. Importance of Floating Chondrons in Cartilage Tissue Engineering

    PubMed Central

    Shafaei, Hajar; Bagernezhad, Hajar; Bagernajad, Hassan

    2017-01-01

    BACKGROUND Dedifferentiation of chondrocytes remains a major problem for cartilage tissue engineering. Chondrocytes loss differentiated phenotype in in vitro culture that is undesired for repair strategies. The chondrocyte is surrounded by a pericellular matrix (PCM), together forming the chondron. PCM has a positive effect on the maintenance of chondrocyte phenotype during culture in comparison to uncovered chondrocyte. Studies suggest that the PCM influence on functional properties of the chondrocytes. However there is no study to show gene expression phenotype differences between round chondron and fibroblastic chondrocytes. We aimed to investigate the effect of pericellular matrix in maintaining of chondrogenic gene expression to solve dedifferentiation problem of chondrocyte. METHODS In this study enzymatically isolated chondrons were cultured for 7 days. Morphology of chondrons were assessed by microscopic examination. Chondrogenic gene expression of Sox9, aggrecan (AGG), cartilage oligomeric matrix protein (COMP), Link protein and chondro-osteogenic gene expression (Runx2, Col1, Col 10 and MMP13) of attached and float chondrons were assessed by real time RT PCR. RESULTS Microscopic observation showed that round shape of chondron observed at day 7 in floating chondrocytes. Gene expression results showed that attached chondrons significantly dedifferentiated by low gene expression of Sox9 and COMP and high MMP13 versus floating cells. CONCLUSION Our results showed that PCM of chondrocyte could restore differentiated state of chondrocytes at day 7. Using unattached form of chondron in cartilage tissue PCM in maintenance of chondrogenic gene expression engineering could be a novel method to solve dedifferentiation problem of chondrocyte. PMID:28289615

  17. Modelling of the MEA float zone using accelerometer data

    NASA Technical Reports Server (NTRS)

    Alexander, J. Iwan D.

    1993-01-01

    During a floating zone experiment involving the growth of indium on a recent orbiter mission, (STS 32) oscillation of the zone shapes were observed to occur in response to the background acceleration. An understanding of the nature of the response of the zone shape to forced (g-jitter) oscillations and predictions of its impact on future experiments is of great interest not only to the PI's but to other commercial and academic investigators who plan to fly similar experiments in the orbiter and on space station. Motivated by this, a 15 month study was undertaken to analyze the nature of the g-sensitivity of the STS 32 floating zone crystal growth experiment. Numerical models were used to describe the time-dependent free surface motion of the zone as it responds to the spacecraft residual acceleration. Relevant experimental data concerning the acceleration environment was obtained from the Honeywell in Space Accelerometer (HISA) investigators through MSFC's ACAP program and processed and analyzed. For the indium floating zone experiment, a series of calculations were made using time-dependent axial accelerations g(t). The form of g(t) included simple sinusoidal disturbances as well as actual data (subject to appropriate filtering) measured on the STS 32 mission. Focus was on the calculation of the response of the free surface of the zone as well as the internal flows and internal heat transfer. The influence of solidification on the response of the zone shape was also examined but found to be negligible.

  18. Floating Probe Assembly for Measuring Temperature of Water

    NASA Technical Reports Server (NTRS)

    Selinsky, T.; Stewart, Randy; Ruffin, Clyde

    2002-01-01

    A floating apparatus denoted a temperature probe aquatic suspension system (TPASS) has been developed for measuring the temperature of an ocean, lake, or other natural body of water at predetermined depths. Prior instruments built for the same purpose were found to give inaccurate readings because the apparatuses themselves significantly affected the temperatures of the water in their vicinities. The design of the TPASS is intended to satisfy a requirement to minimize the perturbation of the temperatures to be measured. The TPASS includes a square-cross-section aluminum rod 28 in. (approx. = 71 cm) long with floats attached at both ends. Each float includes five polystyrene foam disks about 3/4 in. (approx. = 1.9 cm) thick and 2.5 in. (approx. = 6.4 cm) in diameter. The disks are stacked to form cylinders, bolted to the rod, and covered with hollow plastic sleeves. A metal sleeve is clamped to the middle of the aluminum rod, from whence it hangs down into the water. Temperature probes (which can be thermocouples, thermistors, or resistance temperature devices) are placed within the sleeve at the desired measurement depths. Wires from the temperature probes are routed to the input terminals of a data logger. This work was done by Randy

  19. Floating Probe Assembly for Measuring Temperature of Water

    NASA Technical Reports Server (NTRS)

    Stewart, Randy; Ruffin, Clyde

    2002-01-01

    A floating apparatus denoted a temperature probe aquatic suspension system (TPASS) has been developed for measuring the temperature of an ocean, lake, or other natural body of water at predetermined depths. Prior instruments built for the same purpose were found to give inaccurate readings because the apparatuses themselves significantly affected the temperatures of the water in their vicinities. The design of the TPASS is intended to satisfy a requirement to minimize the perturbation of the temperatures to be measured. The TPASS includes a square-cross-section aluminum rod 28 in. (=71 cm) long with floats attached at both ends. Each float includes five polystyrene foam disks about 3/4 in.(=1.9 cm) thick and 2.5 in. (=6.4 cm) in diameter. The disks are stacked to form cylinders, bolted to the rod, and covered with hollow plastic sleeves. A metal sleeve is clamped to the middle of the aluminum rod, from whence it hangs down into the water. Temperature probes (which can be thermocouples, thermistors, or resistance temperature devices) are placed within the sleeve at the desired measurement depths. Wires from the temperature probes are routed to the input terminals of a data logger.

  20. Experimental investigation of the stability of the floating water bridge.

    PubMed

    Montazeri Namin, Reza; Azizpour Lindi, Shiva; Amjadi, Ahmad; Jafari, Nima; Irajizad, Peyman

    2013-09-01

    When a high voltage is applied between two beakers filled with deionized water, a floating bridge of water is formed in between exceeding the length of 2 cm when the beakers are pulled apart. Currently two theories regarding the stability of the floating water bridge exist, one suggesting that the tension caused by electric field in the dielectric medium is holding the bridge and the other suggesting surface tension to be responsible for the vertical equilibrium. We construct experiments in which the electric field and the geometry of the bridge are measured and compared with predictions of theories of the floating water bridge stability. We use a numerical simulation for estimation of the electric field. Our results indicate that the two forces of dielectric and surface tensions hold the bridge against gravity simultaneously and, having the same order of magnitude, neither of the two forces are negligible. In bridges with larger diameters, the effect of dielectric tension is slightly more in the vertical equilibrium than surface tension. Results show that the stability can be explained by macroscopic forces, regardless of the microscopic changes in the water structure.