Science.gov

Sample records for 36cl surface exposure

  1. Deriving earthquake history of the Knidos Fault Zone, SW Turkey, using cosmogenic 36Cl surface exposure dating of the fault scarp.

    NASA Astrophysics Data System (ADS)

    Yildirim, Cengiz; Ersen Aksoy, Murat; Akif Sarikaya, Mehmet; Tuysuz, Okan; Genc, S. Can; Ertekin Doksanalti, Mustafa; Sahin, Sefa; Benedetti, Lucilla; Tesson, Jim; Aster Team

    2016-04-01

    Formation of bedrock fault scarps in extensional provinces is a result of large and successive earthquakes that ruptured the surface several times. Extraction of seismic history of such faults is critical to understand the recurrence intervals and the magnitude of paleo-earthquakes and to better constrain the regional seismic hazard. Knidos on the Datca Peninsula (SW Turkey) is one of the largest cities of the antique times and sits on a terraced hill slope formed by en-echelon W-SW oriented normal faults. The Datça Peninsula constitutes the southern boundary of the Gulf of Gökova, one of the largest grabens developed on the southernmost part of the Western Anatolian Extensional Province. Our investigation relies on cosmogenic 36Cl surface exposure dating of limestone faults scarps. This method is a powerful tool to reconstruct the seismic history of normal faults (e.g. Schlagenhauf et al 2010, Benedetti et al. 2013). We focus on one of the most prominent fault scarp (hereinafter Mezarlık Fault) of the Knidos fault zone cutting through the antique Knidos city. We collected 128 pieces of tablet size (10x20cm) 3-cm thick samples along the fault dip and opened 4 conventional paleoseismic trenches at the base of the fault scarp. Our 36Cl concentration profile indicates that 3 to 4 seismic events ruptured the Mezarlık Fault since Last Glacial Maximum (LGM). The results from the paleoseismic trenching are also compatible with 36Cl results, indicating 3 or 4 seismic events that disturbed the colluvium deposited at the base of the scarp. Here we will present implications for the seismic history and the derived slip-rate of the Mezarlık Fault based on those results. This project is supported by The Scientific and Technological Research Council of Turkey (TUBITAK, Grant number: 113Y436) and it was conducted with the Decision of the Council of Ministers with No. 2013/5387 on the date 30.09.2013 and was done with the permission of Knidos Presidency of excavation in

  2. 36Cl-36Ar Exposure Ages of Chondritic Metals

    NASA Astrophysics Data System (ADS)

    Graf, Th.; Caffee, M. W.; Finkel, R. C.; Marti, K.; Nishiizumi, K.; Ponganis, K. V.

    1995-09-01

    Metal separates were prepared to determine ^36Cl-^36Ar exposure ages for six H4 p.m. falls (with reported bulk exposure ages of 4 to 10Ma), for ten H5 a.m. falls (T(sub)e = 4-10 Ma) and for the Acapulco meteorite (T(^36Cl-^36Ar)= 5.7 Ma). This dating method uses production rate ratios P(^36Cl)/P(^36Ar) and is independent of the shielding-sensitive absolute production rates. It is also known that for protons the production rate ratio is rather insensitive to changes in the energy spectrum; the dependence of this ratio for secondary neutrons is at present less understood. First results were already reported [1]. The cosmic-ray-produced ^3He/^38Ar ratios show a bimodal distribution with two clusters at about 15 and about 9 (Fig. 1). About half of the ^3He is produced via ^3H which is known to diffuse in metal at relatively low temperatures. Therefore, Fig. 1 provides evidence for a quasi-continuous loss of ^3H from such metals. If this loss mechanism is due to solar heating, perihelia <1 AU are indicated for these meteorites. Losses are prominent for H5 a.m. falls, but not for H4 p.m. falls. The orbital implications are consistent with those already known from the time-of-fall parameter (p.m. falls / total falls) which was used in the selection of the H4,H5 sample sets [2]. The exposure age histograms of both H groups show the well known clusters at about 7 Ma. The width of the exposure age peaks differ, however, and the collisional break-up event can be further constrained. Except for Nassirah, all members of the H4 p.m. group fall into the range 7.0 +/- 0.3 Ma. Bulk rock ages (8.2-9.3 Ma) [3] as well as the ^36Cl-^36Ar age (8.3 Ma) of Nassirah are higher and may indicate that this meteorite does not belong to the collisional event. We observe a small but systematic difference in calculated exposure ages by the ^36Cl-^36Ar method, when compared with ages obtained by conventional noble gas production rates. This shift (about 10%) does not appear to be dependent on

  3. An Alluvial Surface Chronology Based on Cosmogenic 36Cl Dating, Ajo Mountains (Organ Pipe Cactus National Monument), Southern Arizona

    NASA Astrophysics Data System (ADS)

    Liu, Beiling; Phillips, Fred M.; Pohl, Molly M.; Sharma, Pankaj

    1996-01-01

    A chronology of alluvial surfaces on piedmont slopes below the western Ajo Mountains, southern Arizona, has been obtained using cosmogenic 36Cl accumulation and AMS radiocarbon dating. The apparent 36Cl ages of individual boulders range from 520,000 to 13,000 yr, and the 14C ages of organic material in the two young terraces are 2750-2350 and 17,800 cal yr B.P. The sequence of 36Cl ages is consistent with the apparent stratigraphic order, but groupings of similar ages for different surfaces appear to result from repeated reworking of older surfaces associated with the deposition of younger ones. The youngest surface gave a distribution of 36Cl ages about 30,000 yr older than the 14C and soil ages; however, this distribution had 36Cl ages that overlapped with 36Cl ages from active channels and hillslopes. We attribute the older-than-expected exposure ages of sampled boulders to inheritance of 36Cl while residing near the surface during very slow erosion on the mountain front. Our results show that although cosmogenic nuclide accumulation can help establish chronologies for surfaces in piedmont settings, care must be used in evaluating the effects of complex exposure histories.

  4. Determination of 36Cl Production Rates Derived from the Well-Dated Deglaciation Surfaces of Whidbey and Fidalgo Islands, Washington

    NASA Astrophysics Data System (ADS)

    Swanson, Terry W.; Caffee, Marc L.

    2001-11-01

    The 36Cl dating method is increasingly being used to determine the surface-exposure history of Quaternary landforms. Production rates for the 36Cl isotopic system, a critical component of the dating method, have now been refined using the well-constrained radiocarbon-based deglaciation history of Whidbey and Fidalgo Islands, Washington. The calculated total production rates due to calcium and potassium are 91±5 atoms 36Cl (g Ca) -1 yr -1 and are 228±18 atoms 36Cl (g K) -1 yr -1, respectively. The calculated ground-level secondary neutron production rate in air, P f(0), inferred from thermal neutron absorption by 35Cl is 762±28 neutrons (g air) -1 yr -1 for samples with low water content (1-2 wt.%). Neutron absorption by serpentinized harzburgite samples of the same exposure age, having higher water content (8-12 wt.%), is ˜40% greater relative to that for dry samples. These data suggest that existing models do not adequately describe thermalization and capture of neutrons for hydrous rock samples. Calculated 36Cl ages of samples collected from the surfaces of a well-dated dacite flow (10,600-12,800 cal yr B.P.) and three disparate deglaciated localities are consistent with close limiting calibrated 14C ages, thereby supporting the validity of our 36Cl production rates integrated over the last ˜15,500 cal yr between latitudes of 46.5° and 51°N. Although our production rates are internally consistent and yield reasonable exposure ages for other localities, there nevertheless are significant differences between these production rates and those of other investigators.

  5. Methodological study on exposure date of Tiankeng by AMS measurement of in situ produced cosmogenic 36Cl

    NASA Astrophysics Data System (ADS)

    Kejun, Dong; Shizhuo, Li; Ming, He; Sasa, Kimikazu; Matsushi, Yuki; Baojian, Huang; Xiangdong, Ruan; Yongjing, Guan; Takahashi, Tsutomu; Sueki, Keisuke; Chaoli, Li; Shaoyong, Wu; Xianggao, Wang; Hongtao, Shen; Nagashima, Yasuo; Shan, Jiang

    2013-01-01

    Tiankeng is a typical Karst relief of the late Quaternary Period. Studies on the exposure ages of Tiankeng are very important in geographical research to elucidate the formation condition, the developing process, and the features of biological species. 36Cl on the surface layer of the rupture cross-section of Tiankeng is largely produced by cosmogenic high-energy neutron induced reactions 40Ca(n, αp) and 39K(n, α), and has accumulated since the formation of the Tiankeng. Low-energy neutron reaction 35Cl(n, γ) contributes a small portion of 36Cl. In this work, the concentration of the cosmogenic 36Cl in rock samples taken from Dashiwei Tiankeng, Leye County, Guangxi Zhuang Autonomous Region, China, was measured jointly by Accelerator Mass Spectrometry (AMS) laboratories of CIAE and University of Tsukuba in an effort to estimate the formation time (or exposure age) of the Tiankeng. The results show that the exposure time of Da Shiwei Tiankeng is about 26 ± 9.6 ka (without erosion correction). The sampling strategy and procedures, experimental set-up, and preliminary results will be presented in detail.

  6. Evidence from cosmic-ray exposure dating based on 36Cl for the pre-Minoan caldera on Santorini, Greece

    NASA Astrophysics Data System (ADS)

    Athanassas, Constantin; Bourlès, Didier; Braucher, Regis; Druitt, Tim; Nomikou, Paraskevi; Léanni, Laetitia

    2016-04-01

    The physiography of Santorini prior to the Minoan (Late Bronze Age) eruption (17th century BCE) is of great archaeological interest, given the importance of Santorini as a commercial centre and port in the Minoan empire. However, the paleogeography of the pre-Minoan caldera has been a point of controversy: Heiken and McCoy (1984) advocated the existence, in the southern part of the present-day caldera, of a pre-existing caldera formed during the 172 ka Lower Pumice eruption, whereas Druitt and Francaviglia (1992), based on the presence of in situ plinian pumice from the Minoan eruption adhering to the modern cliff, conceived the pre-Minoan (22 ka) caldera as having occupied much of the northern basin of the present-day caldera. With the goal of settling the debate we performed cosmic ray exposure dating employing in situ-produced cosmogenic 36Cl to date different generations of caldera cliffs at Santorini, and hence to identify those cliffs predating the Minoan eruption. Our methodology involved the determination of the in situ-produced cosmogenic 36Cl in basaltic and andesitic rocks cropping out in the cliffs. The samples returned 36Cl CRE ages consistent with previously published field mapping of cliff populations based on geomorphological and stratigraphic arguments (Druitt and Francaviglia 1992), suggesting that much of the present cliff line of northern Santorini predated the Minoan eruption, or was superficially modified by landslips and rockfalls during that eruption. The 36Cl CRE ages enable us to better define the paleogeography of the pre-Minoan caldera. References [1] Druitt, T. H. and Francaviglia, V.1992. Caldera formation on Santorini and the physiography of the islands in the Late Bronze Age. Bulletin of Volcanology 54, 484-493. [2] Heiken G and McCoy F (1984) Caldera development during the Minoan eruption, Thira, Cyclades, Greece. Journal of Geophysical Research: 89 (B10), 8841-8862.

  7. Comparison of 36Cl and 3He measurements in glacial surfaces on the tropical Altiplano (Cerro Tunupa volcano, 20°S)

    NASA Astrophysics Data System (ADS)

    Schimmelpfennig, Irene; Blard, Pierre-Henri; Lavé, Jérôme; Benedetti, Lucilla; Aster Team

    2016-04-01

    The combination of two or more cosmogenic nuclides measured in the same rock samples allow complex landscape exposure histories to be quantified, due to the nuclide-specific production and decay rates. In supposedly simple exposure scenarios, such as moraine chronologies, the use of more than one nuclide can also help identify outliers caused by geomorphological bias (e.g. "inheritance") or analytical problems (e.g. nuclide loss or contamination during chemical extraction). The two cosmogenic in situ nuclides 3He and 36Cl are potentially very useful to be simultaneously measured in quartz-lacking lithologies, but their application is more challenging than that of combined 10Be and 26Al measurements, which are routinely employed in quartz-bearing rocks. This is, amongst other things, because the production of 3He and 36Cl depend on various compositional factors. Therefore, 3He and 36Cl have rarely been measured in the same samples so far. Here, we present 36Cl measurements in plagioclases extracted from four moraine boulders and one roche moutonnée on the southern flank of Cerro Tunupa volcano, located in the tropical Bolivian Andes (3800-4500 m, 20°S). In pyroxenes of these samples, 3He has previously been measured to gain insights into the local deglaciation history and climate conditions about 15 kyr ago during the Lake Tauca highstand (Blard et al., 2009, 2013). The ages calculated from the measured 3He and 36Cl concentrations of the 5 samples range from 12 kyr to 180 kyr and are generally in good agreement. The good age agreement of a boulder surface (TU-1C) that is significantly older than the other boulder ages from this moraine confirm the suspicion, that it was exposed to cosmic radiation previous to its last deposition (Blard et al., 2009, 2013). In contrast, the 36Cl age of the roche moutonnée surface (TU2) is significantly younger than the corresponding 3He age, but fits well with the adjacent moraine mean age. It thus arises the question if the 3He

  8. The rock avalanche of the Mt. Peron (Eastern Alps, Italy): new insights from 36Cl exposure dating

    NASA Astrophysics Data System (ADS)

    Martin, Silvana; Ivy-ochs, Susan; Alfimov, Vasili; Vockenhuber, %Christof; Surian, Nicola; Campedel, Paolo; Rigo, Manuel; Viganò, Alfio; De Zorzi, Manuel

    2016-04-01

    In the Late Pleistocene, in the southern side of the Eastern Alps (Veneto region, Italy), when the glacier tongues retreated from the end moraine system areas towards the Dolomitic region, large rock avalanches took place. In the Belluno Valley, occupied by the Piave river, the left side is represented by the Belluno Prealps range, corresponding to the northern flank of a km-scale WSW-ENE oriented alpine syncline formed by rocks from Late Triassic to Late Tertiary in age. The Mt. Peron, belonging to this mountain range, shows its southern lower slope covered by debris cones with scattered boulders and its higher slope, corresponding to the scarp, made of vertical rock strata. At the foot of Mt. Peron, at a distance varying from 500 to 4500 m, there is a 4.5 km2 fan like area delimited by a perimeter of about 15 km. This is a hilly area of poortly sorted, chaotic deposits composed of heterogeneous debris, sandy and silty gravels, angular blocks and very large boulders of carbonatic rocks up to 20 m in diameter. The average thickness of the deposit was estimated to be 80 m, with maximum of 120 m. According to previous works, the main event occurred during the first phases of deglaciation, between 17,000 and 15,000 years BP. Popular stories narrate about two legendary villages destroyed by a mass of stones rolling down in the valley. This is confirmed by archeological findings in the Piave valley which indicate the presence of almost one pre-historic settlement dating 40000-20000 years a B.P., (i.e. before the Last Glacial Maximum).. Recent 36Cl exposure dating have yielded historical ages for both the boulders at the foot of the Mt Peron and those located a few km far from the main scarp. According to these exposure ages we can not exclude the hypothesis that earthquakes related to the Venetian faults could have played a key role for triggering of the rock avalanche and that the main gravitational event took place in historical times rather than during the

  9. APMP comparison of measurement of surface emission rate of 36Cl large area source (APMP.RI(II)-K2.Cl-36).

    PubMed

    Yunoki, Akira; Hino, Yoshio

    2012-09-01

    An international comparison of measurement of beta particle surface emission rate from a (36)Cl large area source (APMP.RI(II)-S1.Cl-36) was carried out within the framework of the Asia-Pacific Metrology Program (APMP). Participants from APMP were NMIJ (Japan), KRISS (Korea) and INER (Chinese Taipei). Participants from the other RMOs were NIST (United States), PTB (Germany), NMISA (South Africa) and VNIIM (Russia). All the results of the participants agreed within ±1%. This was the first international comparison of measurement of surface emission rate of beta particle from a large area source. PMID:22424747

  10. Correcting for nucleogenic ^{36}Cl in cosmogenic ^{36}Cl dating of volcanic rocks from the Erciyes volcano, Central Turkey

    NASA Astrophysics Data System (ADS)

    Sarikaya, M. A.; Zreda, M.; Desilets, D.; Ciner, A.; Sen, E.

    2006-12-01

    Many radiometric methods are suitable for dating lava flows, but none is reliable for routine dating of lava flows younger than 10 ky. The cosmogenic ^{36}Cl method seems promising because it can be applied to any type of rock and laboratory and analytical work is easy and fast. But low cosmogenic ^{36}Cl inventory (after short exposure duration), combined with possible large non-cosmogenic component, makes this technique difficult to apply in a routine fashion. We applied the ^{36}Cl method to date a lava flow and the 14C technique to date the associated ash flow from the Erciyes (Argaeus) volcano, central Turkey. The average of three cosmogenic ^{36}Cl ages is 7.3 \\mp 0.5 ky and the average of two radiocarbon ages is 9.5 \\mp 0.3 ky (calibrated using Calib 5.0). The difference could be due to the overestimation of the calculated nucleogenic ^{36}Cl, which makes up almost one-third of the measured ^{36}Cl. If the nucleogenic component were set to zero, the average ^{36}Cl age would be 10.3 \\mp 0.2 ky. Thus, the ^{36}Cl age should be in the range between 7.3 ky and 10.2 ky, which includes the 14C age near the upper end of the interval. Under the assumption that the 14C age is correct and that the nucleogenic ^{36}Cl has reached a secular equilibrium with the magma, the nucleogenic ^{36}Cl needed to reconcile the ^{36}Cl and 14C ages is only about one-fifth of that previously calculated. In order to investigate this disparity of ages and possible calculating errors of nucleogenic ^{36}Cl, we are analyzing rock samples from where we can directly measure nucleogenic component of ^{36}Cl. This work is important for developing better ways to estimate the nucleogenic ^{36}Cl, which will improve the accuracy of ^{36}Cl dating of young volcanic rocks.

  11. Cosmogenic {sup 36}Cl accumulation in unstable landforms 2. Simulations and measurements on eroding moraines

    SciTech Connect

    Zreda, M.G.; Phillips, F.M.; Elmore, D.

    1994-11-01

    Cosmogenic {sup 36}Cl ages of boulders from late Pleistocene moraines in Bishop Creek, Sierra Nevada, California, provided valuable details about {sup 36}Cl surface exposure dating and the nature of post depositional processes that modify glacial landforms. The natural variability of the apparent {sup 36}Cl ages among morainal boulders is due to soil erosion and gradual exposure of boulders at the surface. Two mechanisms are responsible for the resulting distributions of the apparent {sup 36}Cl ages. Variability of the initial burial depth among boulders and variability in the chemical composition of boulders from the same depth both result in different {sup 36}Cl ages due to the dependence of the depth production profile on the boulder chemistry. The authors measured cosmogenic {sup 36}Cl in boulders from a late Pleistocene moraine. The distribution of the calculated apparent ages allowed them to calculate the true age of 85 kyr and the erosion rate of 570 g cm{sup -2}. These results are in excellent agreement with independently estimated values of 87 kyr and 600 g cm{sup -2} for the age and erosion depth, respectively. These results indicate that the model satisfactorily simulates effects of erosion processes and can thus aid in surface exposure dating of eroding landforms.

  12. Infiltration at yucca mountain, nevada, traced by 36Cl

    NASA Astrophysics Data System (ADS)

    Norris, A. E.; Wolfsberg, K.; Gifford, S. K.; Bentley, H. W.; Elmore, D.

    1987-11-01

    Measurements of chloride and 36Cl in soils from two locations near Yucca Mountain, Nevada, have been used to trace the infiltration of precipitation in this arid region. The results show that the 36Cl fallout from nuclear-weapons testing formed a well-defined peak at one location, with a maximum 36Cl/Cl ratio 0.5 m below the surface. The structure of the 36Cl bomb pulse at the other location was much more complex, and the quantity of 36Cl in the bomb pulse was < 1% of the 6 × 10 12 atoms {36Cl }/{m 2} in the bomb pulse at the first location. The data indicate hydrologic activity subsequent to the 36Cl bomb-pulse fallout at one location, but none at the other location.

  13. Infiltration at Yucca Mountain, Nevada, traced by {sup 36}Cl

    SciTech Connect

    Norris, A.E.; Wolfsberg, K.; Gifford, S.K.; Bentley, H.W.; Elmore, D.

    1987-04-01

    Measurements of chloride and {sup 36}Cl in soils from two locations near Yucca Mountain, Nevada, have been used to trace the infiltration of precipitation in this arid region. The results show that the {sup 36}Cl fallout from nuclear weapons testing formed a well-defined peak at one location, with a maximum 0.5m below the surface. The structure of the {sup 36}Cl bomb pulse at the other location was much more complex, and quantity of {sup 36}Cl in the bomb pulse was <1% of the 6 x 10{sup 12} atoms {sup 36}Cl/m{sup 2} in the bomb pulse at the first location. The data indicate hydrologic activity subsequent to the {sup 36}Cl bomb pulse fallout at one location, but none at the other location. 11 refs.

  14. Cosmogenic 36Cl exposure ages reveal a 9.3 ka BP glacier advance and the Late Weichselian-Early Holocene glacial history of the Drangajökull region, northwest Iceland

    NASA Astrophysics Data System (ADS)

    Brynjólfsson, Skafti; Schomacker, Anders; Ingólfsson, Ólafur; Keiding, Jakob K.

    2015-10-01

    We present twenty-four new cosmogenic isotope (36Cl) surface exposure ages from erratic boulders, moraine boulders and glacially eroded bedrock that constrain the late Weichselian to Holocene glacial history of the Drangajökull region, northwest Iceland. The results suggest a topographically controlled ice sheet over the Vestfirðir (Westfjords) peninsula during the last glaciation. Cold based non-erosive sectors of the ice sheet covered most of the mountains while fjords and valleys were occupied with erosive, warm-based ice. Old36Cl exposure ages from highlands and mountain plateaux (L8; 76.5 ka and H1; 41.6 ka) in combination with younger erratic boulders (L7; 26.2 and K1-K4; 15.0-13.8 ka) superimposed on such surfaces suggest the presence of non-erosive ice over uplands and plateaux in the Vestfirðir peninsula during the last glaciation. Glacially scoured terrain and erratic boulders yielding younger exposure ages (L1-L6; 11.3-9.1 ka and R1, R6-R7; 10.6-9.4 ka) in the lowland areas indicate that the valleys and fjords of the Vestfirðir peninsula were occupied by warm-based, dynamic ice during the last glaciation. The deglaciation of mountain Leirufjall by 26.2 ka BP suggests that ice thinning and deglaciation of some mountains and plateaux preceded any significant lateral retreat of the ice sheet. Subsequently this initial ice thinning was followed by break-up of the shelf based ice sheet off Vestfirðir about 15 ka BP. Hence, the new exposure ages suggest a stepwise asynchronous deglaciation on land, following the shelf break-up with some valleys and most of the highlands, ice free by 14-15 ka BP. The outermost moraine at the mouth of Leirufjörður is dated to 9.3 ka BP, and we suggest the moraine to be formed by a glacier re-advance in response to a cooler climate forced by the reduced Atlantic Meridional Overturning Circulation at around 9.3 ka BP. A system of moraines proximal to the 9.3 ka moraine in Leirufjörður as well as a 9.4 ka deglaciation age

  15. Seismic slip history of the Pizzalto fault (central Apennines, Italy) using in situ-produced 36Cl cosmic ray exposure dating and rare earth element concentrations

    NASA Astrophysics Data System (ADS)

    Tesson, J.; Pace, B.; Benedetti, L.; Visini, F.; Delli Rocioli, M.; Arnold, M.; Aumaître, G.; Bourlès, D. L.; Keddadouche, K.

    2016-03-01

    Morphological and geological observations reveal that most Apenninic faults are highly segmented and that the majority of the fault segments are less than 10 km long. Although these faults have undergone numerous paleoseismological investigations, quantitative data remain crucially lacking for a large number of fault segments. Because such data are essential to understanding how these faults have ruptured and interacted in the past and how they might behave in the future, we investigated the Holocene seismic history of the Pizzalto normal fault, a 13 km long fault segment belonging to the Pizzalto-Rotella-Aremogna fault system in the Apennines. We collected 44 samples from the Pizzalto fault plane exhumed during the Holocene and analyzed the 36Cl and rare earth element (REE) contents. Together, the 36Cl and REE concentrations show that at least six events have exhumed 4.4 m of the fault scarp between 3 and 1 ka, with slip per event values ranging from 0.3 to 1.2 m. No major events have been detected over the last 1 kyr. The Rotella-Aremogna-Pizzalto fault system has a clustered earthquake behavior with a mean recurrence time of 1.2 kyr and a low to moderate probability (ranging from 4% to 26%) of earthquake occurrence over the next 50 years.

  16. Variation in background concentrations and specific activities of 36Cl, 129I and U/Th-series radionuclides in surface waters.

    PubMed

    Sheppard, S C; Herod, M

    2012-04-01

    Assessment of the potential environmental impacts of nuclear fuel waste involves multiple lines of argument, one of which is an evaluation of the possible increments to background concentrations of certain radionuclides. This is especially relevant for radionuclides such as (3)H, (36)Cl and (129)I where there is continuous cosmogenic or geogenic production. However, for (36)Cl and (129)I and certain U/Th-series radionuclides, data are scarce because the analysis methods are complex and costly. The present study used accelerator mass spectroscopy (AMS) to measure(36)Cl and (129)I in river waters throughout Canada. Radiochemical methods were used for (3)H and the selected U/Th-series radionuclides, and stable element concentrations were also determined. There were distinct differences in concentrations among the sites. Stable Cl and I tended to be at higher concentrations near the ocean or population centres. The (3)H was high in regions with power reactors. The (226)Ra, (235)U and (238)U concentrations were high in areas with known U mineralizations, as expected. The (36)Cl and (129)I concentrations were generally homogenous in mid-latitudes, but the (129)I concentration was lower in the one arctic site sampled. Because the stable and radioactive isotopes of Cl and I varied in response to different factors, the resulting specific activities were especially variable. Both Cl and I are homeostatically controlled in animals, thus it follows that dose from (36)Cl and (129)I will depend more closely on specific activity than concentration, and therefore the environmental increments of interest are in the specific activities rather than simply concentrations. PMID:22304997

  17. Age and geomorphic history of Meteor Crater, Arizona, from cosmogenic 36Cl and 14C in rock varnish

    USGS Publications Warehouse

    Phillips, F.M.; Zreda, M.G.; Smith, S.S.; Elmore, D.; Kubik, P.W.; Dorn, R.I.; Roddy, D.J.

    1991-01-01

    Using cosmogenic 36Cl buildup and rock varnish radiocarbon, we have measured the exposure age of rock surfaces at Meteor Crater, Arizona. Our 36Cl measurements on four dolomite boulders ejected from the crater by the impact yield a mean age of 49.7 ?? 0.85 ka, which is in excellent agreement with an average age of 49 ?? 3 ka obtained from thermoluminescence studies on shock-metamorphosed dolomite and quartz. These ages are supported by undetectably low 14C in the oldest rock varnish sample. ?? 1991.

  18. Perchlorate isotope forensics with naturally produced 36Cl

    NASA Astrophysics Data System (ADS)

    Hillegonds, D.; Parker, D.; Singleton, M.; Buchholz, B.; Esser, B.; Moran, J.; Rood, D.; Finkel, R.

    2008-12-01

    The source of perchlorate (ClO4-) in many surface and groundwaters is not known. Recent studies (Parker et al., 2008) suggest that natural production is widespread and common, and may involve atmospheric processes. The isotopic composition of perchlorate chlorine and oxygen has proven useful for identifying anthropogenic/natural perchlorate sources (Bohlke et al, 2005) and for exploring biodegradation in environmental samples (Sturchio et al, 2007). The stable isotope approach, however, requires processing very large volumes of water to obtain milligrams of rigorously separated perchlorate for analysis, limiting its widespread application. Chlorine-36 (36Cl) is a long-lived and rare radionuclide produced cosmogenically in the upper atmosphere. The measurement of 36Cl/Cl by accelerator mass spectrometry (AMS) only requires micrograms of sample chlorine enabling lower volume extractions (less than 1/10th that required for stable isotope techniques), and potentially less rigorous perchlorate chemistry. The primary technical goal of our work is to determine the utility of 36Cl in distinguishing perchlorate source and in constraining mechanisms of natural perchlorate formation. We expect that synthetic perchlorate compounds produced using chloride brines from ancient sources and concentrated modern deposits will have low 36Cl/Cl ratios that will be distinct from natural perchlorate produced in the atmosphere. High levels of 36Cl in groundwater or rainwater perchlorate would then be an unambiguous indication of a natural atmospheric production, and the distribution of 36Cl/Cl in precipitation and groundwater (in conjunction with stable isotope compositions) would constrain the mechanism for natural perchlorate production in the atmosphere. Using accelerator mass spectrometry (AMS), we have measured 36Cl/Cl in a number of synthetic perchlorate salts (including potassium, sodium, magnesium, and ammonium salts). Synthetic salt 36Cl/Cl atom ratios range from 1 to 35 e-15

  19. In-Situ Cosmogenic 36Cl Production Rate Calibration from Basaltic Flows of Mount Etna (Sicily, 38° N)

    NASA Astrophysics Data System (ADS)

    Schimmelpfennig, I.; Benedetti, L.; Pik, R.; Burnard, P.; Blard, P. H.; Bourles, D.

    2007-12-01

    One of the CRONUS-EU goals is to provide high quality calibration sites from independently dated surfaces. Several previous studies have been conducted on 36Cl production rate calibration (e.g. Stone et al. 1996, Phillips et al. 2001), which, however, used different protocols and yielded 36Cl production rates with up to 40% discrepancies. The objectives of this study are 1- to understand the source of these discrepancies and 2- to calibrate 36Cl production rates from its target elements Ca and K. As a first step we focused on testing the chemical protocol by performing a sequential 36Cl extraction experiment on whole rock grains and Ca-rich plagioclase from the same sample. The sample was collected at Mt. Etna on a pahoehoe flow, which has a K-Ar fossil exposure time of (10±3) kyr. Cosmogenic 3He was also precisely measured within cogenetic olivine phenocrysts of this sample (Blard et al. 2005) and yields an exposure time of (10.4±1.5) kyr. Both, total Cl and 36Cl concentrations from the first dissolution steps are high, 5800 ppm (whole rock) and 450 ppm (plagioclase) Cl, and 107 - 106 atoms 36Cl/g of rock dissolved. After about 20% dissolution of the plagioclase sample, Cl is almost completely removed (1-3ppm) and 36Cl concentrations reach a plateau value of 2*105 atoms/g of rock. Using the Stone et al. (1996) and Evans et al. (1997) 36Cl production rates for the target elements Ca and K, respectively, this plateau concentration yields an exposure age which is in excellent agreement with K-Ar dating and cosmogenic 3He ages. On the contrary, in the whole rock sample total Cl concentrations remain high (>330ppm) resulting in a considerable 36Cl production from capture of low-energy neutrons by 35Cl, an additional and still not well-constrained 36Cl production mechanism. The resulting exposure ages from the whole rock are 35-45% higher than the independent 3He ages. For 36Cl production rate calibration from Ca, we will use separated Ca-rich plagioclase from various

  20. Cosmogenic {sup 36}Cl accumulation in unstable landforms 1. Effects of the thermal neutron distribution

    SciTech Connect

    Liu, B.; Phillips, F.M.; Stone, W.D.; Fabryka-Martin, J.T.; Fowler, M.M.

    1994-11-01

    Cosmogenic nuclides produced in situ within minerals at the surface of the Earth are proving to be an effective means of assessing geomorphic histories. The use of multiple cosmogenic nuclides permits both exposure times and erosion rates to be determined. However, if two nuclides are produced only by spallation reactions, the systematic differences in their accumulation rates depend only on the differences in their production rates and half-lives. The relatively small differences that result require a high degree of analytical precision to yield useful results. In contrast to other spallogenic nuclides, {sup 36}Cl is also produced by low-energy neutron, absorption, which creates a different pattern of production as a function of depth. We have measured the thermal flux with depth in a concrete block using {sup 3}He-filled neutron detectors. The measured thermal neutron profile agrees well with predictions from a simple diffusion-based thermal neutron distribution model. Calculations of {sup 36}Cl production using the model suggest that the use of {sup 36}Cl along with a purely spallogenic nuclide to determine erosion rates and exposure times should be less sensitive to analytical error than are determinations from two purely spallogenic nuclides. 31 refs., 7 figs., 3 tabs.

  1. The distribution of meteoric 36Cl/Cl in the United States: A comparison of models

    USGS Publications Warehouse

    Moysey, S.; Davis, S.N.; Zreda, M.; Cecil, L.D.

    2003-01-01

    The natural distribution of 36Cl/Cl in groundwater across the continental United States has recently been reported by Davis et al. (2003). In this paper, the large-scale processes and atmospheric sources of 36Cl and chloride responsible for controlling the observed 36Cl/Cl distribution are discussed. The dominant process that affects 36Cl/Cl in meteoric groundwater at the continental scale is the fallout of stable chloride from the atmosphere, which is mainly derived from oceanic sources. Atmospheric circulation transports marine chloride to the continental interior, where distance from the coast, topography, and wind patterns define the chloride distribution. The only major deviation from this pattern is observed in northern Utah and southern Idaho where it is inferred that a continental source of chloride exists in the Bonneville Salt Flats, Utah. In contrast to previous studies, the atmospheric flux of 36Cl to the land surface was found to be approximately constant over the United States, without a strong correlation between local 36Cl fallout and annual precipitation. However, the correlation between these variables was significantly improved (R 2=0.15 to R 2=0.55) when data from the southeastern USA, which presumably have lower than average atmospheric 36Cl concentrations, were excluded. The total mean flux of 36Cl over the continental United States and total global mean flux of 36Cl are calculated to be 30.5??7.0 and 19.6??4.5 atoms m-2 s-1, respectively. The 36Cl/Cl distribution calculated by Bentley et al. (1996) underestimates the magnitude and variability observed for the measured 36Cl/Cl distribution across the continental United States. The model proposed by Hainsworth (1994) provides the best overall fit to the observed 36Cl/Cl distribution in this study. A process-oriented model by Phillips (2000) generally overestimates 36Cl/Cl in most parts of the country and has several significant local departures from the empirical data.

  2. Distribution and chemical fate of 36Cl-chlorine dioxide gas during the fumigation of tomatoes and cantaloupe

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The distribution and chemical fate of 36Cl-ClO2 gas subsequent to fumigation of tomatoes or cantaloupe was investigated as was major factors that affect the formation of chloroxyanion byproducts. Approximately 22% of the generated 36Cl-ClO2 was present on fumigated tomatoes after a 2-hour exposure t...

  3. Temporal evolution of (36)Cl abundances in the Great Lakes.

    PubMed

    Poghosyan, Armen; Sturchio, Neil C

    2015-06-01

    The observed (36)Cl isotopic abundance in Great Lakes water decreases from west to east, with the highest (36)Cl/Cl ratio of 1332 × 10(-15) in Lake Superior and the lowest (36)Cl/Cl ratio of 151 × 10(-15) in Lake Erie, whereas the (36)Cl concentration ((36)Cl atoms/L) is lowest in Lake Superior and higher in the other Great Lakes. The (36)Cl concentration in Lake Superior is much higher than expected from normal atmospheric deposition over the basin, consistent with deposition of nuclear bomb-produced (36)Cl during 1952-1964. A conservative mass-balance model constrained by hydrological parameters and available (36)Cl fluence measurements predicts the (36)Cl abundances in the Great Lakes from 1945 to 2015, in excellent agreement with available data for Lakes Superior, Michigan, and Huron, but the model underestimates (36)Cl abundances for Lakes Erie and Ontario. However, assuming that (36)Cl demonstrates non-conservative behavior and is significantly retained in the drainage basins, a model incorporating a delayed input parameter successfully predicts observed (36)Cl concentrations in all of the Great Lakes. PMID:25817926

  4. Accelerator mass spectrometry of 36Cl produced by neutrons from the Hiroshima bomb.

    PubMed

    Kato, K; Habara, M; Yoshizawa, Y; Biebel, U; Haberstock, G; Heinzl, J; Korschinek, G; Morinaga, H; Nolte, E

    1990-10-01

    Accelerator mass spectrometry was performed at the Munich tandem laboratory to determine 36Cl/Cl ratios of samples from a tombstone exposed to neutrons from the Hiroshima bomb. The ratios were determined from the surface to deeper positions. The depth profile of 36Cl/Cl can be used for estimating the neutron energy distribution and intensity near the hypocentre in Hiroshima. PMID:1976726

  5. Measurement of cosmogenic /sup 36/Cl/Cl in young volcanic rocks: An application of accelerator mass spectrometry in geochronology

    SciTech Connect

    Leavy, B.D.; Phillips, F.M.; Elmore, D.; Kubik, P.W.

    1987-01-01

    We have measured /sup 36/Cl/Cl ratios in a number of young volcanic rocks in order to test the feasibility of using /sup 36/Cl buildup as a geochronometer for materials less than about 700,000 years old. All of the analyzed rocks have been dated independently using K-Ar or other radiometric dating methods and have exposure histories that are known or can be reasonably assumed. Measured /sup 36/Cl/Cl ratios in these rocks are in good agreement with the calculated in-situ /sup 36/Cl buildup curve. These analyses indicate that AMS measurement of /sup 36/Cl buildup in young rocks is a potentially powerful new method for dating materials that had previously been undatable, and as such will have broad applications in volcanology, tectonics, geophysics, and Quaternary research.

  6. High (36)Cl/Cl ratios in Chernobyl groundwater.

    PubMed

    Roux, Céline; Le Gal La Salle, Corinne; Simonucci, Caroline; Van Meir, Nathalie; Fifield, L Keith; Diez, Olivier; Bassot, Sylvain; Simler, Roland; Bugai, Dmitri; Kashparov, Valery; Lancelot, Joël

    2014-12-01

    After the explosion of the Chernobyl Nuclear Power Plant in April 1986, contaminated material was buried in shallow trenches within the exclusion zone. A (90)Sr plume was evidenced downgradient of one of these trenches, trench T22. Due to its conservative properties, (36)Cl is investigated here as a potential tracer to determine the maximal extent of the contamination plume from the trench in groundwater. (36)Cl/Cl ratios measured in groundwater, trench soil water and leaf leachates are 1-5 orders of magnitude higher than the theoretical natural (36)Cl/Cl ratio. This contamination occurred after the Chernobyl explosion and currently persists. Trench T22 acts as an obvious modern point source of (36)Cl, however other sources have to be involved to explain such contamination. (36)Cl contamination of groundwater can be explained by dilution of trench soil water by uncontaminated water (rainwater or deep groundwater). With a plume extending further than that of (90)Sr, radionuclide which is impacted by retention and decay processes, (36)Cl can be considered as a suitable tracer of contamination from the trench in groundwater provided that modern release processes of (36)Cl from trench soil are better characterized. PMID:25128774

  7. Timing of maximum glacial extent and deglaciation from HualcaHualca volcano (southern Peru), obtained with cosmogenic 36Cl.

    NASA Astrophysics Data System (ADS)

    Alcalá, Jesus; Palacios, David; Vazquez, Lorenzo; Juan Zamorano, Jose

    2015-04-01

    Andean glacial deposits are key records of climate fluctuations in the southern hemisphere. During the last decades, in situ cosmogenic nuclides have provided fresh and significant dates to determine past glacier behavior in this region. But still there are many important discrepancies such as the impact of Last Glacial Maximum or the influence of Late Glacial climatic events on glacial mass balances. Furthermore, glacial chronologies from many sites are still missing, such as HualcaHualca (15° 43' S; 71° 52' W; 6,025 masl), a high volcano of the Peruvian Andes located 70 km northwest of Arequipa. The goal of this study is to establish the age of the Maximum Glacier Extent (MGE) and deglaciation at HualcaHualca volcano. To achieve this objetive, we focused in four valleys (Huayuray, Pujro Huayjo, Mollebaya and Mucurca) characterized by a well-preserved sequence of moraines and roches moutonnées. The method is based on geomorphological analysis supported by cosmogenic 36Cl surface exposure dating. 36Cl ages have been estimated with the CHLOE calculator and were compared with other central Andean glacial chronologies as well as paleoclimatological proxies. In Huayuray valley, exposure ages indicates that MGE occurred ~ 18 - 16 ka. Later, the ice mass gradually retreated but this process was interrupted by at least two readvances; the last one has been dated at ~ 12 ka. In the other hand, 36Cl result reflects a MGE age of ~ 13 ka in Mollebaya valley. Also, two samples obtained in Pujro-Huayjo and Mucurca valleys associated with MGE have an exposure age of 10-9 ka, but likely are moraine boulders affected by exhumation or erosion processes. Deglaciation in HualcaHualca volcano began abruptly ~ 11.5 ka ago according to a 36Cl age from a polished and striated bedrock in Pujro Huayjo valley, presumably as a result of reduced precipitation as well as a global increase of temperatures. The glacier evolution at HualcaHualca volcano presents a high correlation with

  8. Dating chert using in-situ produced 10Be: Possible complications revealed on landslide scarps through a comparison with 36Cl applied to coexisting limestone.

    NASA Astrophysics Data System (ADS)

    Zerathe, Swann; Braucher, Régis; Lebourg, Thomas; Leani, Leatitia; Manetti, Michel; Bourles, Didier

    2013-04-01

    This abstract and presentation highlights potential complications that may arise while using in situ produced 10Be to date diagenetic silica (chert)exposure or burial event. The initiation and evolution of large gravitational collapses in sedimentary rocks were constrained using cosmic ray exposure dating. Because these collapses occurred in a stratigraphic level composed of chert (diagenetic silica) concretions interbedded in limestone layers, their development was studied by performing in situ-produced 36Cl and 10Be concentration measurements in both the limestone and coexisting diagenetic silica (chert), respectively. Following the routinely used decontamination and preparation protocols for 10Be produced in diagenetic silica, large discrepancies were observed with exposure ages determined by 36Cl within carbonate for samples originating from the same scarp. While 36Cl exposure ages were clustered as expected for a unique single gravitational event, 10Be exposure ages were scattered along the same studied scarps. To determine the origin of such a bias, petrological investigations were carried out for chert (diagenetic silica). Thin sections highlighted a complex mineralogical texture characterized by remnant silicified ooids showing calcitic cores, calcite inclusions and a dominant amorphous hydrated silica (grain > 20 μm). To decipher and characterize the potential origins of the excess measured 10Be within diagenetic silica, all samples were first reprocessed following the routine decontamination protocol (HCL-H2SiF6 leachings and three partial HF dissolutions) but starting from three different grain size fractions (GS1: 1000-500, GS2: 500-250 and GS3: 250-50 μm). The resulting concentrations clearly showed a decreasing 10Be content as a function of the grain size, but still yielded 10Be exposure ages significantly higher than 36Cl counterparts. Because potential adsorption of 10Be at the surface of amorphous silica grains was suspected, partial dissolution

  9. The sup 36 Cl ages of the brines in the Magadi-Natron basin, east Africa

    SciTech Connect

    Kaufman, A.; Margaritz, M.A.; Hollos, G. ); Paul, M.; Boaretto, E. ); Hillaire-Marcel, C. ); Taieb, M. )

    1990-10-01

    The depression in the East African Rift which includes both Lake Magadi and Lake Natron forms a closed basin within which almost all the dissolved chloride originates in precipitation, since there is no important source of very ancient sedimentary chloride. This provides an ideal setting for the evaluation of the {sup 36}Cl methodology as a geochemical and hydrological tracer. The main source of recent water, as represented by the most dilute samples measured, is characterized by a {sup 36}Cl/Cl ratio of 2.5 {times} 10{sup {minus}14}, in agreement with the calculated value expected in precipitation. Surface evaporation increases the chlorinity of the local freshwater inflow by about a factor of 110 without changing the isotopic ratio, indicating that little chloride enters the system in the form of sediment leachate. A second type of brine found in the basin occurs in a hot deep groundwater reservoir and is characterized by lower {sup 36}Cl/Cl ratios (<1.2 {times} 10{sup {minus}14}). By comparing this value with the 2.5 {times} 10{sup {minus}14} in recent recharge, one obtains an approximate salt accumulation age of 760 Ka which is consistent with thee time of the first appearance of the lake. These older brines also have lower {sup 18}O and {sup 2}H values which indicate that they were recharged during a climatically different era. The {sup 36}Cl/Cl ratios in the inflowing waters and in the accumulated brine, together with the known age of the Lake Magadi basin, may be used to estimate the importance of the hypogene and epigene, as opposed to the meteoric, mode of {sup 36}Cl production. Such a calculation shows that the hypogene and epigene processes together contribute less than 6% of the total {sup 36}Cl present in the lake.

  10. Distribution and Origin of 36Cl In Allende CAIs

    SciTech Connect

    Matzel, J P; Jacobsen, B; Hutcheon, I D; Krot, A N; Nagashima, K; Yin, Q; Ramon, E C; Weber, P; Wasserburg, G J

    2009-12-11

    The abundance of short-lived radionuclides (SLRs) in early solar system materials provide key information about their nucleosynthetic origin and can constrain the timing of early solar system events. Excesses of {sup 36}S ({sup 36}S*) correlated with {sup 35}Cl/{sup 34}S ratios provide direct evidence for in situ decay of {sup 36}Cl ({tau}{sub 1/2} {approx} 0.3 Ma) and have been reported in sodalite (Na{sub 8}Al{sub 6}Si{sub 6}O{sub 24}Cl{sub 2}) and wadalite (Ca{sub 6}Al{sub 5}Si{sub 2}O{sub 16}Cl{sub 3}) in CAIs and chondrules from the Allende and Ningqiang CV carbonaceous chondrites. While previous studies demonstrate unequivocally that {sup 36}Cl was extant in the early solar system, no consensus on the origin or initial abundance of {sup 36}Cl has emerged. Understanding the origin of {sup 36}Cl, as well as the reported variation in the initial {sup 36}Cl/{sup 35}Cl ratio, requires addressing when, where and how chlorine was incorporated into CAIs and chondrules. These factors are key to distinguishing between stellar nucleosynthesis or energetic particle irradiation for the origin of {sup 36}Cl. Wadalite is a chlorine-rich secondary mineral with structural and chemical affinities to grossular. The high chlorine ({approx}12 wt%) and very low sulfur content (<<0.01 wt%) make wadalite ideal for studies of the {sup 36}Cl-{sup 36}S system. Wadalite is present in Allende CAIs exclusively in the interior regions either in veins crosscutting melilite or in zones between melilite and anorthite associated with intergrowths of grossular, monticellite, and wollastonite. Wadalite and sodalite most likely resulted from open-system alteration of primary minerals with a chlorine-rich fluid phase. We recently reported large {sup 36}S* correlated with {sup 35}Cl/{sup 34}S in wadalite in Allende Type B CAI AJEF, yielding a ({sup 36}Cl/{sup 35}Cl){sub 0} ratio of (1.7 {+-} 0.3) x 10{sup -5}. This value is the highest reported {sup 36}Cl/{sup 35}Cl ratio and is {approx}5 times

  11. 36Cl accelerator mass spectrometry with a bespoke instrument

    NASA Astrophysics Data System (ADS)

    Wilcken, K. M.; Freeman, S. P. H. T.; Schnabel, C.; Binnie, S. A.; Xu, S.; Phillips, R. J.

    2013-01-01

    Cosmogenic 36Cl analysis by accelerator mass spectrometry (AMS) is a valuable environmental and geological sciences research tool. Overcoming the stable nuclide 36S isobar interfering with measurement is challenging, however. Traditionally this has required large accelerators, but following recent technical advances it is now possible with ∼30 MeV ion energies. Consequently 5 MV or even smaller modern bespoke spectrometers are now 36Cl-capable, increasing accessibility and promoting wider and more varied 36Cl use. However, the technical ability to identify 36Cl ions is quite distinct from demonstrated high-performance AMS. Such is the theme of this paper. We present a systematic analysis of the accurate measurement of sample radioisotope relative to the stable chlorine, the normalisation of the measured ratio and correction for remaining 36S interference, all combined with the use of stable-isotope dilution to determine sample Cl concentration to begin with. We conclude by showing that repeated analyses support our claims for routine 3% 36Cl-AMS data. Accordingly, the modest SUERC spectrometer well competes with the performance of larger longer-established instruments, and the results may be quite generic for modern bespoke instruments.

  12. Depth dependence of soil carbonate accumulation based on cosmogenic 36Cl dating

    NASA Astrophysics Data System (ADS)

    Liu, Beiling; Phillips, Fred M.; Elmore, David; Sharma, Pankaj

    1994-12-01

    Indurated pedogenic carbonate layers (calcretes) are common in soils on stable surfaces in arid to semiarid climates. The morphology and composition of calcretes provide important information on the geomorphic and climatic histories of the regions where they are formed, but they have proved difficult to date with conventional radiometric methods. We report cosmogenic 36Cl-buildup ages from three fractions (leachable Cl, carbonate, silicate) of a calcrete from the surface of an alluvial slope below the Ajo Mountains in southern Arizona. All three fractions give reasonably concordant ages, ranging from 700 ka at the base of the calcrete horizon to 200 ka at its top. These ages are in good agreement both with estimates of age based on correlation with similar, independently dated, soils in the region and with 36Cl-buildup ages on surficial boulders. These results support the ideas that calcretes accumulate upward with time and that water movement through the carbonate matrix is very limited after induration.

  13. Aluminum 26, {sup 10}Be, and {sup 36}Cl depth profiles in the Canyon Diablo iron meteorite

    SciTech Connect

    Michlovich, E.S.; Elmore, D.; Vogt, S.; Lipschutz, M.E.; Masarik, J.; Reedy, R.C.

    1994-11-25

    The authors have measured activities of the long-lived cosmogenic radionuclides {sup 26}Al, {sup 10}Be, and {sup 36}Cl in 12 fragments of the iron meteorite Canyon Diablo and have constructed production rate-versus-depth profiles of those radionuclides. Profiles determined using differential particle fluxes calculated with the LAHET code system are in good agreement with {sup 26}Al, {sup 10}Be, and {sup 36}Cl experimental data, but the agreement for {sup 36}Cl was obtained only after neutron-induced cross sections were modified. Profiles calculated with lunar particle fluxes are much lower than experimental Canyon Diablo profiles. The cosmic ray exposure ages of most samples are near 540 m.y. 34 refs., 4 figs., 2 tabs.

  14. Determination of paleoseismic activity over a large time-scale: Fault scarp dating with 36Cl

    NASA Astrophysics Data System (ADS)

    Mozafari Amiri, Nasim; Tikhomirov, Dmitry; Sümer, Ökmen; Özkaymak, Çaǧlar; Uzel, Bora; Ivy-Ochs, Susan; Vockenhuber, Christof; Sözbilir, Hasan; Akçar, Naki

    2016-04-01

    Bedrock fault scarps are the most direct evidence of past earthquakes to reconstruct seismic activity in a large time-scale using cosmogenic 36Cl dating if built in carbonates. For this method, a surface along the fault scarp with a minimum amount of erosion is required to be chosen as an ideal target point. The section of the fault selected for sampling should cover at least two meters of the fault surface from the lower part of the scarp, where intersects with colluvium wedge. Ideally, sampling should be performed on a continuous strip along the direction of the fault slip direction. First, samples of 10 cm high and 15 cm wide are marked on the fault surface. Then, they are collected using cutters, hammer and chisel in a thickness of 3 cm. The main geometrical factors of scarp dip, scarp height, top surface dip and colluvium dip are also measured. Topographic shielding in the sampling spot is important to be estimated as well. Moreover, density of the fault scarp and colluvium are calculated. The physical and chemical preparations are carried in laboratory for AMS and chemical analysis of the samples. A Matlab® code is used for modelling of seismically active periods based on increasing production rate of 36Cl following each rupture, when a buried section of a fault is exposed. Therefore, by measuring the amount of cosmogenic 36Cl versus height, the timing of major ruptures and their offsets are determined. In our study, Manastır, Mugırtepe and Rahmiye faults in Gediz graben, Priene-Sazlı, Kalafat and Yavansu faults in Büyük Menderes graben and Ören fault in Gökava half-graben have been examined in the seismically active region of Western Turkey. Our results reconstruct at least five periods of high seismic activity during the Holocene time, three of which reveal seismic ruptures beyond the historical pre-existing data.

  15. Depth dependence of soil carbonate accumulation based on cosmogenic [sup 36]Cl dating

    SciTech Connect

    Liu, B.; Phillips, F.M. ); Elmore, D.; Sharma, P. )

    1994-12-01

    Indurated pedogenic carbonate layers (calcretes) are common in soils on stable surfaces in arid to semiarid climates. The morphology and composition of calcretes provide important information on the geomorphic and climatic histories of the regions where they are formed, but they have proved difficult to date with conventional radiometric methods. We report cosmogenic [sup 36]Cl-buildup ages from three fractions (leachable Cl, carbonate, silicate) of a calcrete from the surface of an alluvial slope below the Ajo Mountains in southern Arizona. All three fractions give reasonably concordant ages, ranging from 700 ka at the base of the calcrete horizon to 200 ka at its top. These ages are in good agreement both with estimates of age based on correlation with similar, independently dated, soils in the region and with [sup 36]Cl-buildup ages on surficial boulders. These results support the ideas that calcretes accumulate upward with time and that water movement through the carbonate matrix is very limited after induration. 19 refs., 2 figs., 1 tab.

  16. Estimation of thermal neutron fluences in the concrete of proton accelerator facilities from 36Cl production

    NASA Astrophysics Data System (ADS)

    Bessho, K.; Matsumura, H.; Miura, T.; Wang, Q.; Masumoto, K.; Hagura, H.; Nagashima, Y.; Seki, R.; Takahashi, T.; Sasa, K.; Sueki, K.; Matsuhiro, T.; Tosaki, Y.

    2007-06-01

    The thermal neutron fluence that poured into the shielding concrete of proton accelerator facilities was estimated from the in situ production of 36Cl. The thermal neutron fluences at concrete surfaces during 10-30 years of operation were in the range of 1012-1014 n/cm2. The maxima in thermal neutron fluences were observed at ≈5-15 cm in the depths analyzed for 36Cl/35Cl by AMS. These characteristics imply that thermalization of neutrons occurred inside the concrete. Compared to the several tens of MeV cyclotrons, secondary neutrons penetrate deeper into the concrete at the high-energy accelerators possessing acceleration energies of 400 MeV and 12 GeV. The attenuation length of neutrons reflects the energy spectra of secondary neutrons emitted by the nuclear reaction at the beam-loss points. Increasing the energy of secondary neutrons shifts the maximum in the thermal neutron fluences to deeper positions. The data obtained in this study will be useful for the radioactive waste management at accelerator facilities.

  17. A new Holocene eruptive history of Erebus volcano, Antarctica using cosmogenic 3He and 36Cl

    NASA Astrophysics Data System (ADS)

    Parmelee, D. E.; Kyle, P. R.; Kurz, M. D.; Marrero, S.

    2013-12-01

    Unraveling the timing of a volcano's most recent eruptions is crucial to understanding its present and future behavior. In this study, we use cosmogenic 3He and 36Cl in mineral separates (clinopyroxene and anorthoclase, respectively) to date the 10 most recent lava flows on Erebus volcano. Erebus is a 2,170-km3 active stratovolcano on Ross Island, Antarctica that is known for its persistent anorthoclase phonolite lava lake and frequent Strombolian eruptions. Previous anorthoclase 40Ar/39Ar ages from the 10 flows [1, 2] suggest they were erupted at roughly regular intervals between 17 and 0 ka. However, the uncertainties on the Ar ages are large (up to 39 %), and the likelihood of excess 40Ar in melt inclusions may skew the Ar ages older than eruption ages. The new cosmogenic ages provide new insights into Erebus eruption chronology. We used two different models to scale production rates: the Lal/Stone model [3] and the new Sato/Lifton model [4]. We find ~20-25 % younger ages with the Sato/Lifton model, attributable to different treatment of atmospheric pressure effects, solar modulation effects, and muogenic production rates in each model. 3He and 36Cl exposure ages of the same 10 flows range from 4.5 × 0.1 to 9.7 × 0.2 ka (Lal/Stone) or 3.5 × 0.1 to 7.5 × 0.2 ka (Sato/Lifton), significantly different than the Ar ages, with a much shorter eruption period. Surprisingly, three of the flows have exposure ages older than their Ar ages, despite the exposure ages being considered minimum ages of eruption and the Ar ages maxima. Concordance of the 3He and 36Cl ages measured in the same samples strengthens the validity of our results and implies that the 3He and 36Cl production rates [5] are well-calibrated for high latitude, high altitude sites and that the methodologies are robust. Regardless of which scaling model is used, the results yield a new understanding of the current eruptive phase of Erebus, particularly in documenting the short timespan over which the

  18. Determination of 36Cl in biological shield concrete using pyrohydrolysis and liquid scintillation counting.

    PubMed

    Itoh, Mitsuo; Watanabe, Kazuo; Hatakeyama, Mutsuo; Tachibana, Mitsuo

    2002-07-01

    A method for the determination of 36Cl in biological shield concrete of nuclear reactors was developed. Cl in the concrete sample was extracted quantitatively by pyrohydrolysis at 900 degrees C and recovered in Na2CO3 solution for subsequent measurement of 36Cl by liquid scintillation counting. WO3 was used as an accelerator in the pyrohydrolysis. The Cl extraction procedure was optimized by investigating experimental conditions with the use of ion chromatography and its recovery was evaluated by the analysis of the geochemical reference samples. The detection limit of 36Cl was 0.02 Bq g(-1) for a sample weight of 2 g. The relative standard deviation was 3-7% for the samples containing 0.5 Bq g(-1) levels of 36Cl. The method was applied to determine 36Cl in biological shield concrete of the Japan Power Demonstration Reactor. PMID:12173658

  19. The Hiroshima thermal-neutron discrepancy for (36)Cl at large distances. Part I: New (36)Cl measurements in granite samples exposed to A-bomb neutrons.

    PubMed

    Huber, Thomas; Rühm, Werner; Kato, Kazuo; Egbert, Stephen D; Kubo, Florian; Lazarev, Vitali; Nolte, Eckehart

    2005-10-01

    The long-lived radioisotope (36)Cl (half-life: 301,000 years) was measured in granite samples exposed to A-bomb neutrons at distances from 94 to 1,591 m from the hypocenter in Hiroshima, by means of accelerator mass spectrometry (AMS). Measured (36)Cl/Cl ratios decrease from 1.6 x 10(-10) close to the hypocenter to about 1-2 x 10(-13), at a distance of 1,300 m from the hypocenter. At this distance and beyond the measured (36)Cl/Cl ratios do not change significantly and scatter around values of 1-2 x 10(-13). These findings suggest that the (36)Cl had been predominantly produced by thermalized neutrons from the A-bomb via neutron capture on stable (35)Cl, at distances from the hypocenter smaller than about 1,200 m. At larger distances, however, confounding processes induced by cosmic rays or neutrons from the decay of uranium and thorium become important. This hypothesis is theoretically and experimentally supported in a consecutive paper. The results are compared to calculations that are based on the most recent dosimetry system DS02. Close to the hypocenter, measured (36)Cl/Cl ratios are lower than those calculated, while they are significantly higher at large distances from the hypocenter. If the contribution of the cosmic rays and of the neutrons from the decay of uranium and thorium in the sample was subtracted, however, no significant deviation from the DS02 calculations was observed, at those distances. Thus, the Hiroshima neutron discrepancy reported in the literature for (36)Cl for samples from large distances from the hypocenter, i.e., higher measured (36)Cl/Cl ratios than predicted by the previous dosimetry system DS86, was not confirmed. PMID:16177928

  20. "Groundwater ages" of the Lake Chad multi-layer aquifers system inferred from 14C and 36Cl data

    NASA Astrophysics Data System (ADS)

    Bouchez, Camille; Deschamps, Pierre; Goncalves, Julio; Hamelin, Bruno; Seidel, Jean-Luc; Doumnang, Jean-Claude

    2014-05-01

    Assessment of recharge, paleo-recharge and groundwater residence time of aquifer systems of the Sahel is pivotal for a sustainable management of this vulnerable resource. Due to its stratified aquifer system, the Lake Chad Basin (LCB) offers the opportunity to assess recharge processes over time and to link climate and hydrology in the Sahel. Located in north-central Africa at the fringe between the Sahel and the Sahara, the lake Chad basin (LCB) is an endorheic basin of 2,5.106 km2. With a monsoon climate, the majority of the rainfall occurs in the southern one third of the basin, the Chari/Logone River system transporting about 90% of the runoff generated within the drainage basin. A complex multi-layer aquifer system is located in the central part of the LCB. The Quaternary unconfined aquifer, covering 500 000 km2, is characterized by the occurrence of poorly understood piezometric depressions. Artesian groundwaters are found in the Plio-Pleistocene lacustrine and deltaic sedimentary aquifers (early Pliocene and Continental Terminal). The present-day lake is in hydraulic contact with the Quaternary Aquifer, but during past megalake phases, most of the Quaternary aquifer was submerged and may experience major recharge events. To identify active recharge area and assess groundwater dynamics, one hundred surface and groundwater samples of all layers have been collected over the southern part of the LCB. Major and trace elements have been analyzed. Measurements of 36Cl have been carried out at CEREGE, on the French 5 MV AMS National Facility ASTER and 14C activities have been analyzed for 17 samples on the French AMS ARTEMIS. Additionally, the stable isotopic composition was measured on the artesian aquifer samples. In the Quaternary aquifer, results show a large scatter with waters having very different isotopic and geochemical signature. In its southern part and in the vicinity of the surface waters, groundwaters are predominantly Ca-Mg-HCO3 type waters with very

  1. Excess 36Ar in the Efremovka Meteorite: Evidence for Live 36Cl in the Early Solar System

    NASA Astrophysics Data System (ADS)

    Murty, S. V. S.; Shukolyukov, Yu. A.; Goswami, J. N.

    1995-09-01

    The recent discovery of the presence of ^41Ca (t = 0.15 Ma) in the early solar system at the time of formation of the Efremovka CAIs [1] has prompted us to look for the possible presence of ^36Cl (t = 0.43 Ma) in this meteorite. Since ^36Cl decays to ^36Ar, an excess ^36Ar will in principle be a signature of the presence of extinct ^36Cl. However in situ (n,g) reaction on ^35Cl can also produce ^36Cl and generate excess ^36Ar. A study of all noble gases is helpful in decoupling the various ^36Ar components. Here we report the noble gas results on a bulk sample of Efremovka (a single chip adjacent to CAI E60). Work on two CAIs E40 (coarse-grained) and E42 (fine-grained) is currently in progress. All the noble gases have been analysed on VG 1200 mass spectrometer by standard procedure. After 400 degrees C combustion in 2 torr O2, mainly intended to get rid of surfical contaminants, the subsequent extractions at 900, 1200 and 1500 degrees C are carried out by pyrolysis. The Ne and Ar data for the total sample given in Table-1 have been corrected for blanks, mass discrimination and interferences as detailed in [2]. From the Ne data, we derive ^21Ne(sub)c = 4.1x10^-8ccSTP/g and (^22Ne/^21Ne)(sub)c = 1.043 +/-0.011. Using the ^21Ne production rate of Eugster [3] an exposure age of 9.0 Ma is obtained. The maximum ^36Ar release (about 86%) occurs at 1200 degrees C wherein the minimum ^38Ar/^36Ar (0.1795) is also observed. Even the ^38Ar/^36Ar value of 0.1801 for the total sample is less than the value of 0.1880 for the planetary component[4], indicating the presence of additional Ar-components in Efremovka and in particular, Ar produced by neutron capture on chlorine. If we assume that the measured ^38Ar/^36Ar value in Efremovka is a mixture of three components (trapped = 0.1880; spallogenic = 1.45-1.60 and neutron produced from Cl = 3x10^-3 [5,6]), the abundance of each of these components can be obtained, with the aid of Ne data, to be (in units of 10^-8ccSTP/g) ^36Ar

  2. Study of nuclear reactions producing 36Cl by micro-AMS

    NASA Astrophysics Data System (ADS)

    Luís, H.; Jesus, A. P.; Fonseca, M.; Cruz, J.; Galaviz, D.; Franco, N.; Alves, E.

    2016-01-01

    36Cl is one of several short to medium lived isotopes (as compared to the earth age) whose abundances at the earlier solar system may help to clarify its formation process. There are two generally accepted possible models for the production of this radionuclide: it originated from the ejecta of a nearby supernova (where 36Cl was most probably produced in the s-process by neutron irradiation of 35Cl) and/or it was produced by in-situ irradiation of nebular dust by energetic particles (mostly, p, a, 3He -X-wind irradiation model). The objective of the present work is to measure the cross section of the 37Cl(p,d)36Cl and 35Cl(d,p)36Cl nuclear reactions, by measuring the 36Cl content of AgCl samples (previously bombarded with high energy protons and deuterons) with AMS, taking advantage of the very low detection limits of this technique for chlorine measurements. For that, the micro-AMS system of the LF1/ITN laboratory had to be optimized for chlorine measurements, as to our knowledge this type of measurements had never been performed in such a system (AMS with micro-beam). Here are presented the first results of these developments, namely the tests in terms of precision and reproducibility that were done by comparing AgCl blanks irradiated at the Portuguese National Reactor with standards produced by the dilution of the NIST SRM 4943 standard material.

  3. Search for extinct 36Cl: Vigarano CAIs, the Pink Angel from Allende, and a Ningqiang chondrule

    NASA Astrophysics Data System (ADS)

    Nakashima, Daisuke; Ott, Ulrich; Hoppe, Peter; El Goresy, Ahmed

    2008-12-01

    We have searched for excesses of 36S derived from the decay of extinct 36Cl in sodalite, a secondary Cl-rich mineral, in Ca-Al-rich inclusions (CAIs) from the Vigarano and Allende CV3 chondrites and in a chondrule from the Ningqiang carbonaceous chondrite. The presence of sodalite in two CAIs from Vigarano and its absence from surrounding CAI fragments suggests sodalite formation after CAI fragmentation. As for sodalite in the Allende Pink Angel CAI, oxygen isotopic compositions have been interpreted as indicative of high temperature interactions, thus suggesting formation prior to accretion to the parent body, probably in a nebular setting. Sodalite in the Ningqiang chondrule is considered to have formed via alkali-Ca exchange, which is believed to have occurred before accretion to the parent body. Sodalites in the Vigarano CAIs and in the Ningqiang chondrule show no clear evidence for the presence of radiogenic 36S. The inferred 2 σ upper limits for 36Cl/ 35Cl at the time of sodalite formation are 1.6 × 10 -6 (Vigarano CAIs) and 3.3 × 10 -6 (Ningqiang chondrule), respectively. In the Pink Angel CAI sodalite exhibits small 36S excesses which weakly correlate with 35Cl/ 34S ratios. The inferred 36Cl/ 35Cl ratio of (1.8 ± 2.2) × 10 -6 (2 σ error) is lower than that found by Hsu et al. [Hsu, W., Guan, Y., Leshin, L. A., Ushikubo, T. and Wasserburg, G. J. (2006) A late episode of irradiation in the early solar system: Evidence from extinct 36Cl and 26Al in meteorites. Astrophys. J. 640, 525-529], thus indicative of heterogeneous distribution of 36Cl in this CAI. Spallation reactions induced by energetic particles from the young Sun are suggested for the origin of 36Cl, similar to the case of 10Be. While 10Be appears to be present in roughly equal abundance in all studied CAIs, our study indicates the level of 36Cl abundances to be variable so that there seems to be no simple relationship between 10Be and 36Cl. This would be expected if trapped cosmic rays rather

  4. The cosmogenic radionuclides {sup 7}Be, {sup 10}Be, and {sup 36}Cl in precipitation

    SciTech Connect

    Knies, D.L.

    1994-12-31

    Two-thirds of atmospheric {sup 7}Be (t{sub 1/2}=53 d), {sup 10}Be(t{sub 1/2}= 1.5 My), and {sup 36}Cl(t{sub 1/2}=0.3 My) is produced in the stratosphere and one-third in the troposphere. The residence time of these radionuclides in the stratosphere is a few years and in the troposphere is a few weeks. Since {sup 7}Be`s half-life is short compared to its residence time in the stratosphere and similar to its residence time in the troposphere, the {sup 7}Be/{sup 10}Be and {sup 7}Be/{sup 36}Cl ratios should have distinct tropospheric and stratospheric values. Consequently, these isotopes can be used to study processes that involve mixing of air from the troposphere and stratosphere. Relationships between the radionuclide concentrations and air mass history, event type, season, and the major cation and anion concentrations will be presented. Evidence and mechanisms for the fractionation of the {sup 36}Cl and {sup 10}Be concentrations as a function of event type will be presented. Evidence and mechanisms for the fractionation of the {sup 36}Cl and {sup 10}Be concentrations as a function of event type will be presented. A departure from the theoretical {sup 10}Be/{sup 36}Cl production rate ratio of {approx}40 is seen only in one direction with an apparent limit right at the calculated ratio. For this reason, a new theoretical calculation of the {sup 10}Be/{sup 36}Cl production rate ratio was undertaken. The new calculated value is {approx}9.3. This value is in good agreement with the measured mean values in both the Greenland ice sheet and West Lafayette, IN wet precipitation of 8.1 and 9.1 respectively.

  5. Calibration of cosmogenic noble gas production in ordinary chondrites based on 36Cl-36Ar ages. Part 1: Refined produced rates for cosmogenic 21Ne and 38Ar

    NASA Astrophysics Data System (ADS)

    Dalcher, N.; Caffee, M. W.; Nishiizumi, K.; Welten, K. C.; Vogel, N.; Wieler, R.; Leya, I.

    2013-10-01

    We measured the concentrations and isotopic compositions of He, Ne, and Ar in bulk samples and metal separates of 14 ordinary chondrite falls with long exposure ages and high metamorphic grades. In addition, we measured concentrations of the cosmogenic radionuclides 10Be, 26Al, and 36Cl in metal separates and in the nonmagnetic fractions of the selected meteorites. Using cosmogenic 36Cl and 36Ar measured in the metal separates, we determined 36Cl-36Ar cosmic-ray exposure (CRE) ages, which are shielding-independent and therefore particularly reliable. Using the cosmogenic noble gases and radionuclides, we are able to decipher the CRE history for the studied objects. Based on the correlation 3He/21Ne versus 22Ne/21Ne, we demonstrate that, among the meteorites studied, only one suffered significant diffusive losses (about 35%). The data confirm that the linear correlation 3He/21Ne versus 22Ne/21Ne breaks down at high shielding. Using 36Cl-36Ar exposure ages and measured noble gas concentrations, we determine 21Ne and 38Ar production rates as a function of 22Ne/21Ne. The new data agree with recent model calculations for the relationship between 21Ne and 38Ar production rates and the 22Ne/21Ne ratio, which does not always provide unique shielding information. Based on the model calculations, we determine a new correlation line for 21Ne and 38Ar production rates as a function of the shielding indicator 22Ne/21Ne for H, L, and LL chondrites with preatmospheric radii less than about 65 cm. We also calculated the 10Be/21Ne and 26Al/21Ne production rate ratios for the investigated samples, which show good agreement with recent model calculations.

  6. Attempt to determine the environmental 36Cl concentration in water by liquid scintillation counting

    NASA Astrophysics Data System (ADS)

    Florkowski, T.; Schuszler, Ch.

    1986-11-01

    A low-background liquid scintillation spectrometer (ALOKA SL-1) located in the IAEA Isotope Hydrology Laboratory in Vienna was used for 36Cl activity measurement in water samples. The procedure of sample preparation consists of synthesizing of silicon tetrachloride or sodium chloride followed by purification. In both cases the limiting factor in the analysis appeared to be the pure reproducibility of the sample preparation procedure. The conclusion from these experiments is that the liquid scintillation method could be feasible only for the identification of the "bomb chlorine" but is far from being suitable for the accurate determination of 36Cl in groundwater for dating purposes.

  7. Late Pleistocene ages for the most recent volcanism and glacial-pluvial deposits at Big Pine volcanic field, California, USA, from cosmogenic 36Cl dating

    NASA Astrophysics Data System (ADS)

    Vazquez, J. A.; Woolford, J. M.

    2015-09-01

    The Big Pine volcanic field is one of several Quaternary volcanic fields that poses a potential volcanic hazard along the tectonically active Owens Valley of east-central California, and whose lavas are interbedded with deposits from Pleistocene glaciations in the Sierra Nevada Range. Previous geochronology indicates an ˜1.2 Ma history of volcanism, but the eruption ages and distribution of volcanic products associated with the most-recent eruptions have been poorly resolved. To delimit the timing and products of the youngest volcanism, we combine field mapping and cosmogenic 36Cl dating of basaltic lava flows in the area where lavas with youthful morphology and well-preserved flow structures are concentrated. Field mapping and petrology reveal approximately 15 vents and 6 principal flow units with variable geochemical composition and mineralogy. Cosmogenic 36Cl exposure ages for lava flow units from the top, middle, and bottom of the volcanic stratigraphy indicate eruptions at ˜17, 27, and 40 ka, revealing several different and previously unrecognized episodes of late Pleistocene volcanism. Olivine to plagioclase-pyroxene phyric basalt erupted from several vents during the most recent episode of volcanism at ˜17 ka, and produced a lava flow field covering ˜35 km2. The late Pleistocene 36Cl exposure ages indicate that moraine and pluvial shoreline deposits that overlie or modify the youngest Big Pine lavas reflect Tioga stage glaciation in the Sierra Nevada and the shore of paleo-Owens Lake during the last glacial cycle.

  8. Late Pleistocene ages for the most recent volcanism and glacial-pluvial deposits at Big Pine volcanic field, California, USA, from cosmogenic 36Cl dating

    USGS Publications Warehouse

    Vazquez, Jorge A.; Woolford, Jeff M

    2015-01-01

    The Big Pine volcanic field is one of several Quaternary volcanic fields that poses a potential volcanic hazard along the tectonically active Owens Valley of east-central California, and whose lavas are interbedded with deposits from Pleistocene glaciations in the Sierra Nevada Range. Previous geochronology indicates an ∼1.2 Ma history of volcanism, but the eruption ages and distribution of volcanic products associated with the most-recent eruptions have been poorly resolved. To delimit the timing and products of the youngest volcanism, we combine field mapping and cosmogenic 36Cl dating of basaltic lava flows in the area where lavas with youthful morphology and well-preserved flow structures are concentrated. Field mapping and petrology reveal approximately 15 vents and 6 principal flow units with variable geochemical composition and mineralogy. Cosmogenic 36Cl exposure ages for lava flow units from the top, middle, and bottom of the volcanic stratigraphy indicate eruptions at ∼17, 27, and 40 ka, revealing several different and previously unrecognized episodes of late Pleistocene volcanism. Olivine to plagioclase-pyroxene phyric basalt erupted from several vents during the most recent episode of volcanism at ∼17 ka, and produced a lava flow field covering ∼35 km2. The late Pleistocene 36Cl exposure ages indicate that moraine and pluvial shoreline deposits that overlie or modify the youngest Big Pine lavas reflect Tioga stage glaciation in the Sierra Nevada and the shore of paleo-Owens Lake during the last glacial cycle.

  9. Radiocarbon dating and the 36Cl/Cl evolution of three Great Artesian Basin wells at Dalhousie, South Australia

    NASA Astrophysics Data System (ADS)

    Abu Risha, Usama A.

    2016-06-01

    The use of 14C (half-life = 5,730 years) in modeling the evolution of the 36Cl/Cl ratios in groundwater is reported for the first time. The complexity of the Cl-36Cl system due to the occurrence of different Cl and 36Cl sources and the difficulty of the determination of the initial groundwater 36Cl/Cl ratios have raised concerns about the reliability of using 36Cl (half-life = 301 thousand years, a) as a groundwater-dating tool. This work uses groundwater 14C age as a calibrating parameter of the Cl-36Cl/Cl decay-mixing models of three wells from the southwestern Great Artesian Basin (GAB), Australia. It aims to allow for the different sources of Cl and 36Cl in the southwestern GAB aquifer. The results show that the initial Cl concentrations range from 245 to 320 mg/l and stable Cl is added to groundwater along flowpaths at rates ranging from 1.4 to 3.5 mg/l/ka. The 36Cl content of the groundwater is assumed to be completely of atmospheric origin. The samples have different Cl-36Cl/Cl mixing-decay models reflecting recharge under different conditions as well as the heterogeneity of the aquifer.

  10. Radiocarbon dating and the 36Cl/Cl evolution of three Great Artesian Basin wells at Dalhousie, South Australia

    NASA Astrophysics Data System (ADS)

    Abu Risha, Usama A.

    2016-01-01

    The use of 14C (half-life = 5,730 years) in modeling the evolution of the 36Cl/Cl ratios in groundwater is reported for the first time. The complexity of the Cl-36Cl system due to the occurrence of different Cl and 36Cl sources and the difficulty of the determination of the initial groundwater 36Cl/Cl ratios have raised concerns about the reliability of using 36Cl (half-life = 301 thousand years, a) as a groundwater-dating tool. This work uses groundwater 14C age as a calibrating parameter of the Cl-36Cl/Cl decay-mixing models of three wells from the southwestern Great Artesian Basin (GAB), Australia. It aims to allow for the different sources of Cl and 36Cl in the southwestern GAB aquifer. The results show that the initial Cl concentrations range from 245 to 320 mg/l and stable Cl is added to groundwater along flowpaths at rates ranging from 1.4 to 3.5 mg/l/ka. The 36Cl content of the groundwater is assumed to be completely of atmospheric origin. The samples have different Cl-36Cl/Cl mixing-decay models reflecting recharge under different conditions as well as the heterogeneity of the aquifer.

  11. Millennial strain partitioning and fault interaction revealed by 36Cl cosmogenic nuclide datasets from Abruzzo, Central Italy

    NASA Astrophysics Data System (ADS)

    Gregory, L. C.; Phillips, R. J.; Roberts, G.; Cowie, P. A.; Shanks, R. P.; McCaffrey, K. J. W.; Wedmore, L. N. J.; Zijerveld, L.

    2015-12-01

    In zones of distributed continental faulting, it is critical to understand how slip is partitioned onto brittle structures over both long-term millennial time scales and shorter-term individual earthquake cycles. The comparison of slip distributions on different timescales is challenging due to earthquake repeat-times being longer or similar to historical earthquake records, and a paucity of data on fault activity covering millennial to Quaternary scales in detail. Cosmogenic isotope analyses from bedrock fault scarps have the potential to bridge the gap, as these datasets track the exposure of fault planes due to earthquakes with better-than-millennial resolution. In this presentation, we will use an extensive 36Cl dataset to characterise late Holocene activity across a complicated network of normal faults in Abruzzo, Italy, comparing the most recent fault behaviour with the historical earthquake record in the region. Extensional faulting in Abruzzo has produced scarps of exposed bedrock limestone fault planes that have been preserved since the last glacial maximum (LGM). 36Cl accumulates in bedrock fault scarps as the plane is progressively exhumed by earthquakes and thus the concentration of 36Cl measured up the fault plane reflects the rate and patterns of slip. In this presentation, we will focus on the most recent record, revealed at the base of the fault. Utilising new Bayesian modelling techniques on new and previously collected data, we compare evidence for this most recent period of slip (over the last several thousands of years) across 5-6 fault zones located across strike from each other. Each sampling site is carefully characterised using LiDAR and GPR. We demonstrate that the rate of slip on individual fault strands varies significantly, between having periods of accelerated slip to relative quiescence. Where data is compared between across-strike fault zones and with the historical catalogue, it appears that slip is partitioned such that one fault

  12. Total radioactive residues and residues of [36Cl]chlorate in market size broilers.

    PubMed

    Smith, David J; Byrd, James A; Anderson, Robin C

    2007-07-11

    The oral administration of chlorate salts reduces the numbers of Gram-negative pathogens in gastrointestinal tracts of live food animals. Although the efficacy of chlorate salts has been demonstrated repeatedly, the technology cannot be introduced into commercial settings without first demonstrating that chlorate residues, and metabolites of chlorate remaining in edible tissues, represent a negligible risk to consumers. Typically, a first step in this risk assessment is to quantify the parent compound and to identify metabolites remaining in edible tissues of animals treated with the experimental compound. The objectives of this study were to determine the pathway(s) of chlorate metabolism in market broilers and to determine the magnitude of chlorate residues remaining in edible tissues. To this end, 12 broilers (6 weeks; 2.70+/-0.34 kg) were randomly assigned to three treatments of 7.4, 15.0, and 22.5 mM sodium [36Cl]chlorate dissolved in drinking water (n=4 broilers per treatment). Exposure to chlorate, dissolved in drinking water, occurred at 0 and 24 h (250 mL per exposure), feed was withdrawn at hour 38, water was removed at hour 48, and birds were slaughtered at hour 54 (16 h after feed removal and 8 h after water removal). The radioactivity was rapidly eliminated in excreta with 69-78% of the total administered radioactivity being excreted by slaughter. Total radioactive residues were proportional to dose in all edible tissues with chloride ion comprising greater than 98.5% of the radioactive residue for the tissue (9.4-97.8 ppm chlorate equivalents). Chlorate residues were typically greatest in the skin (0.33-0.82 ppm), gizzard (0.1-0.137 ppm), and dark muscle (0.05-0.14 ppm). Adipose, liver, and white muscle tissue contained chlorate concentrations from 0.03 to 0.13 ppm. In contrast, chlorate concentrations in excreta eliminated during the 6 h period prior to slaughter ranged from 53 to 71 ppm. Collectively, these data indicate that broilers rapidly

  13. 36Cl: A tracer in groundwater in the aquia formation of Southern Maryland

    USGS Publications Warehouse

    Purdy, C.B.; Mignerey, A.C.; Helz, G.R.; Drummond, D.D.; Kubik, P.W.; Elmore, D.; Hemmick, T.

    1987-01-01

    The Aquia Formation (Paleocene) of Southern Maryland, a marine unit consisting predominantly of quartz sands, but containing 20-40% glauconite, represents one of the many productive, heavily pumped aquifers of the Southeastern Coastal Plain. An unusually high 36Cl activity ( ~ 15 ?? modem water) measured in an outcrop sample is interpreted as a result of the bomb pulse input. About 25 km downdip from the recharge area, a minimum in total chloride concentration occurs. This minimum is thought to correlate with the latest low-stand of sea-level, and thus to provide time information which is in general agreement with ages calculated from hydrodynamic data. However, significant increases in the 36Cl concentrations are observed along the flow path which may be due to ion filtration or to leakage of modem, bomb-contaminated water into the Aquia aquifer. ?? 1987.

  14. Cosmogenic 36Cl ages of Quaternary basalt flows in the Mojave Desert, California, USA

    NASA Astrophysics Data System (ADS)

    Phillips, Fred M.

    2003-07-01

    Basalt flows provide excellent opportunities for calibration and intercomparison of Quaternary dating methods, remote sensing methods, and rates of geomorphic processes. The immediate motivation for this study was to provide chronology for a blind test of the utility of rock varnish microstratigraphy as an indicator of the age of flow emplacement. Five basaltic eruptive centers in the Mojave Desert of California were sampled for cosmogenic 36Cl analysis. Multiple samples were taken from most centers and, with one exception, produced good agreement. Assuming a surficial erosion rate of 1 mm/kyr -1, the flows yielded the following ages: Amboy Crater, 79±5 ka; Pisgah Crater, 22.5±1.3 ka; Cima field, I-Cone, 27±1.3 ka; Cima field, A-Cone, 21±1.6 ka and 11.5±1.5 ka; Cima field, flow of unidentified origin, 46±2 ka. The ages from the Cima I and A cones are in good agreement with previous cosmogenic 3He dating. Ages from the three previously undated flows are significantly older than previous estimates based on flow appearance. Tanzhou Liu performed varnish microstratigraphic analysis on samples collected from the same sites. His results were submitted for publication without knowledge of the 36Cl ages. His age estimates agree well with the 36Cl ages for the three previously undated flows, strongly supporting the validity of varnish microstratigraphy as a chronological correlation tool.

  15. Cosmogenic 36Cl in karst waters from Bunker Cave North Western Germany - A tool to derive local evapotranspiration?

    NASA Astrophysics Data System (ADS)

    Münsterer, C.; Fohlmeister, J.; Christl, M.; Schröder-Ritzrau, A.; Alfimov, V.; Ivy-Ochs, S.; Wackerbarth, A.; Mangini, A.

    2012-06-01

    Monthly rain and drip waters were collected over a period of 10 months at Bunker Cave, Germany. The concentration of 36Cl and the 36Cl/Cl-ratios were determined by accelerator mass spectrometry (AMS), while stable (35+37)Cl concentrations were measured with both, ion chromatography (IC) and AMS. The measured 36Cl-fluxes of (0.97 ± 0.57) × 104 atoms cm-2 month-1 (0.97 atoms m-2 month-1) in precipitation were on average twice as high as the global mean atmospheric production rate. This observation is consistent with the local fallout pattern, which is characterized by a maximum at mid-latitudes. The stable chloride concentration in drip waters (ranging from 13.2 to 20.9 mg/l) and the 36Cl-concentrations (ranging from 16.9 × 106 to 35.3 × 106 atoms/l) are a factor of 7 and 10 above the values expected from empirical evapotranspiration formulas and the rain water concentrations, respectively. Most likely the additional stable Cl is due to human impact from a nearby urban conglomeration. The large 36Cl-enrichment is attributed to the local evapotranspiration effect, which appears to be higher than the calculated values and to additional bomb-derived 36Cl from nuclear weapons tests in the 1950s and 60s stored in the soil above the cave. In the densely vegetated soil above Bunker Cave, 36Cl seems not to behave as a completely conservative tracer. The bomb derived 36Cl might be retained in the soil due to uptake by minerals and organic material and is still being released now. Based on our data, the residence time of 36Cl in the soil is estimated to be about 75-85 years.

  16. Late Pleistocene piedmont glaciations in the Eastern Mediterranean; insights from cosmogenic 36Cl dating of hummocky moraines in southern Turkey

    NASA Astrophysics Data System (ADS)

    Çiner, Attila; Sarıkaya, Mehmet Akif; Yıldırım, Cengiz

    2015-05-01

    We report the presence of Late Pleistocene piedmont glaciers represented by the largest hummocky moraine field observed in the Eastern Mediterranean. The piedmont glaciers originated from the Geyikdağ ice cap (∼40 km2), situated between 2350 and 2650 m above sea level (a.s.l.) (Central Tauride Mountains of Turkey), and deeply carved the north-facing hillslopes before reaching the Namaras Valley (2000-2050 m a.s.l). The hummocky moraines resulted from in-situ deposition of stagnant glacier ice where debris cover was heterogeneously distributed on the glacier surface. Thirty-four boulders from hummocky, disintegration, lateral and terminal moraines from the Namaras Valley and the tributary Susam Valley (2100-2200 m a.s.l.) were dated by cosmogenic 36Cl surface exposure dating. The moraine ages indicate three phases of deglaciation during the Late Pleistocene. The oldest deglaciation occurred in the Namaras Valley at 18.0 ± 1.1 ka (ka: thousand years ago) towards the end of the Last Glacial Maximum (LGM) and is recorded entirely by hummocky moraines. We speculate that hummocky moraine forming processes with cycles of relief inversion gave rise to boulder apparent ages up to a few thousand years younger in our study area. Therefore, 18.0 ± 1.1 ka should be regarded as a minimum age with a probable true age much closer to the local-LGM values (∼20 ka) as observed in the surrounding mountains. Paleo-piedmont glaciers also deposited several lateral moraines that are ∼50 m higher than the hummocky moraines. Although the lateral moraines probably represent the build-up and the hummocky moraines the final phase of the same local-LGM-pulse, both lateral moraines started to retreat from the Late-glacial (14.0 ± 2.7 ka) and gradually disappeared by mid-Holocene (5.2 ± 1.0 ka), encompassing the Younger Dryas (YD) stadial. In the Susam Valley, the Late-glacial is represented by a terminal moraine (13.4 ± 1.5 ka). The glacier retreat was very fast as indicated by an

  17. Multiple dating approach (14C, U/Th and 36Cl) of tsunami-transported reef-top megaclasts on Bonaire (Leeward Antilles) - potential and current limitations

    NASA Astrophysics Data System (ADS)

    Rixhon, Gilles; May, Simon Matthias; Engel, Max; Mechernich, Silke; Keulertz, Rebecca; Schroeder-Ritzrau, Andrea; Fohlmeister, Jens; Frank, Norbert; Dunai, Tibor; Brueckner, Helmut

    2016-04-01

    Coastal hazard assessment depends on reliable information on the magnitude and frequency of past high-energy wave events (EWE: tsunamis, storms). For this purpose onshore sedimentary records represent promising geo-archives for the mid- and late-Holocene EWE history. In comparison to fine-grained sediments which have been extensively studied in the recent past, supralittoral megaclasts are less investigated, essentially due to the difficulties related to the dating of corresponding depositional events, and thus their limited value for inferring the timing of major events. On Bonaire (Leeward Antilles, Caribbean), supratidal coarse-clast deposits form prominent landforms all around the island. Fields of large boulders (up to 150 t) are among the best-studied reef-top megaclasts worldwide. Transport by Holocene tsunamis is assumed at least for the largest boulders (Engel and May, 2012). Although a large dataset of 14C and electron spin resonance (ESR) ages is available for major coral rubble ridges and ramparts, showing some age clusters during the Late Holocene, it is still debated whether these data reflect the timing of major depositional/transport event(s), and how these data sets are biased by reworking of coral fragments. In addition, different processes may be responsible for the deposition of the coral rubble ridges and ramparts (storm) and the solitary megaclasts (tsunami). As an attempt to overcome the current challenges for dating the dislocation of the megaclasts, three distinct dating methods were implemented: (i) 14C dating of boring bivalves (Lithophaga) attached to the boulders; (ii) uranium-series (U/Th) dating of post-depositional, secondary calcitic flowstone at the underside of the boulders; and (iii) surface exposure dating of overturned boulders via 36Cl concentration measurements in corals. The three 14C datings yield age estimates >37 ka, i.e. most probably beyond the applicability of the method, which sheds doubt on the usefulness of this

  18. 36Cl/Cl ratios in geothermal systems: preliminary measurements from the Coso Field

    SciTech Connect

    Nimz, G.J.; Moore, J.N.; Kasameyer, P.W.

    1997-07-01

    The {sub 36}Cl/Cl isotopic composition of chlorine in geothermal systems can be a useful diagnostic tool in characterizing hydrologic structure, in determining the origins and age of waters within the systems, and in differentiating the sources of chlorine (and other solutes) in the thermal waters. The {sub 36}Cl/Cl values for several geothermal water samples and reservoir host rock samples from the Coso, California geothermal field have been measured for these purposes. The results indicate that most of the chlorine is not derived from the dominant granitoid that host the geothermal system. If the chlorine was originally input into the Coso subsurface through meteoric recharge, that input occurred at least 1-1.25 million years ago. The results suggest that the thermal waters could be connate waters derived from sedimentary formations, presumably underlying and adjacent top the granitic rocks, which have recently migrated into the host rocks. Alternatively, most of the chlorine but not the water, may have recently input into the system from magmatic sources. In either case, the results indicate that most of the chlorine in the thermal waters has existed within the granitoid host rocks for no more than about 100,00-200,00 years. this residence time for the chlorine is similar to residence times suggested by other researchers for chlorine in deep groundwaters of the Mono Basin north of the Coso field.

  19. Estimating groundwater recharge in fractured rock from environmental 3H and 36Cl, Clare Valley, South Australia

    NASA Astrophysics Data System (ADS)

    Cook, P. G.; Robinson, N. I.

    2002-08-01

    Vertical profiles of 3H and 36Cl concentrations are obtained from piezometer nests installed in fractured metasedimentary aquifers in the Clare Valley, South Australia. Because 3H is lost during evapotranspiration with negligible fractionation, while 36Cl is retained within the soil, comparison of 3H and 36Cl concentrations allows estimation of the aquifer recharge rate. An analytical solution for the transport of 3H and 36Cl through planar, parallel fractures is used to investigate the effect of variations in matrix porosity, tortuosity, fracture aperture, fracture spacing and aquifer recharge rate on tracer profiles and then to reproduce observed profiles within piezometer nests. While the measured distributions of these tracers are not able to constrain most model parameters, they are able to tightly constrain the aquifer recharge rate. The broad nature of the 36Cl and 3H peaks measured at our sites is simulated using a constant fracture spacing, lognormal distributions of fracture apertures, and mean recharge rates of 60-75 mm yr-1.

  20. 36Cl measurements in Hiroshima granite samples as part of an international intercomparison study. Results from the Munich group.

    PubMed

    Huber, T; Rühm, W; Hoshi, M; Egbert, S D; Nolte, E

    2003-04-01

    Within the effort to resolve the so-called Hiroshima neutron discrepancy, an international intercomparison study has been carried out on granite samples from Hiroshima, with participating institutions from Japan, the US, and Germany. (36)Cl and (152)Eu produced in these samples by thermal neutrons from the A-bomb explosion were assessed independently by means of different techniques. At the Maier-Leibnitz-Laboratory near Munich, Germany, (36)Cl concentrations were measured by accelerator mass spectrometry. Measured (36)Cl/Cl ratios ranged from 1,670 x 10(-13) (at a distance of 146 m from the hypocenter) to 2.2 x 10(-13) (at a distance of 1,163 m from the hypocenter). One granite sample not exposed to A-bomb neutrons was measured as a control, and a (36)Cl/Cl ratio of 2.6 x 10(-13) was obtained. On average, our experimental results are 20-30% lower than those provided by model calculations based on the dosimetry system DS86. The results presented here do not support previous assessments of (36)Cl, (60)Co, and (152)Eu which had suggested much larger thermal neutron fluences than those calculated on the basis of DS86 for distances from the hypocenter of more than 1,000 m. PMID:12684827

  1. Exposure testing of solar absorber surfaces

    SciTech Connect

    Moore, S.W.

    1986-01-01

    The Los Alamos National Laboratory has been involved in supporting, monitoring and conducting exposure testing of solar materials for approximately ten years. The Laboratory has provided technical monitoring of the IITRI, DSET, Lockheed, and Berry contracts and has operated the Los Alamos exposure Facility for over five years. This report will outline some of the past exposure testing, the testing still in progress, and describe some of the major findings. While this report will primarily emphasize solar absorber surfaces, some of the significant findings relative to advanced glazing will be discussed.

  2. Experimental determination of the {sup 36}Cl(n,p){sup 36}S and {sup 36}Cl(n,{alpha}){sup 33}P reaction cross sections and the consequences on the origin of {sup 36}S

    SciTech Connect

    Smet, L. de; Wagemans, C.; Goeminne, G.; Heyse, J.; Gils, J. van

    2007-03-15

    The {sup 36}Cl(n,p){sup 36}S and {sup 36}Cl(n,{alpha}){sup 33}P reaction cross sections have been studied with resonance neutrons at the linear accelerator GELINA of the IRMM in Geel (Belgium) and have been determined up to approximately 250 keV using the time-of-flight technique. In this energy region, 17 resonances were observed, whereas eight were identified before. For some resonances the resonance strength, the spin, and the total width could be determined. From the obtained cross section data, the MACS has been calculated by numerical integration. These updated MACS values were used in stellar models to trace the origin of the rare isotope {sup 36}S.

  3. Exposure of phosphatidylserine on the cell surface.

    PubMed

    Nagata, S; Suzuki, J; Segawa, K; Fujii, T

    2016-06-01

    Phosphatidylserine (PtdSer) is a phospholipid that is abundant in eukaryotic plasma membranes. An ATP-dependent enzyme called flippase normally keeps PtdSer inside the cell, but PtdSer is exposed by the action of scramblase on the cell's surface in biological processes such as apoptosis and platelet activation. Once exposed to the cell surface, PtdSer acts as an 'eat me' signal on dead cells, and creates a scaffold for blood-clotting factors on activated platelets. The molecular identities of the flippase and scramblase that work at plasma membranes have long eluded researchers. Indeed, their identity as well as the mechanism of the PtdSer exposure to the cell surface has only recently been revealed. Here, we describe how PtdSer is exposed in apoptotic cells and in activated platelets, and discuss PtdSer exposure in other biological processes. PMID:26891692

  4. Evidence of Early Holocene Glacial Advances in Southern South America from Cosmogenic Surface Exposure Dating

    NASA Astrophysics Data System (ADS)

    Douglass, D. C.; Singer, B. S.; Kaplan, M. R.; Ackert, R. P.; Mickelson, D. M.; Caffee, M. W.

    2004-12-01

    10Be and 36Cl cosmogenic nuclide surface exposure dating of erratic boulders reveal two glacier advances in southern South America (46°S) during the Early Holocene. Seven of ten boulders from the outer moraine yield a weighted mean of 8.5±0.7 ka and five of six boulders from the inner moraine yield a weighted mean age of 6.2±0.8 ka (2σ uncertainties). The four outliers are anomalously old (interpreted to contain inherited cosmogenic isotopes from prior exposure) and are identified on the basis of Chi-Squared statistics and bi-modal probability distribution curves. These glacial advances are likely the result of a northward migration of the southern westerlies causing an increase in precipitation and/or a decrease in temperature at this latitude. Reconstructions of equilibrium line altitudes (ELA) at the times of moraine deposition based on Accumulation Area Rations (AARs) are about 300 m lower than modern. This ELA depression is not particularly sensitive to the AAR used, and corresponds to conditions 2.4° C cooler (if no change in precipitation), or 1000 mm/a wetter (if no change in temperature) than the modern climate. The older advance precedes the currently accepted initiation of Holocene glacial activity in southern South America by about 3000 years, and appears to be temporally synchronous with the "8.2 ka event" recorded in Greenland and many other parts of the world. The younger advance is slightly older than, but indistinguishable from, documented neoglacial advances and climate changes in southern South America and four other continents. If there are causal links between these temporally synchronous, globally distributed events, then millennial scale climate changes appear to involve reorganization of global weather systems (such as migration of the southern westerlies), or may be externally forced (e.g. solar variability).

  5. Formation of the Short-lived Radionuclide 36Cl in the Protoplanetary Disk During Late-stage Irradiation of a Volatile-rich Reservoir

    NASA Astrophysics Data System (ADS)

    Jacobsen, Benjamin; Matzel, Jennifer; Hutcheon, Ian D.; Krot, Alexander N.; Yin, Qing-Zhu; Nagashima, Kazuhide; Ramon, Erick C.; Weber, Peter K.; Ishii, Hope A.; Ciesla, Fred J.

    2011-04-01

    Short-lived radionuclides (SLRs) in the early solar system provide fundamental insight into protoplanetary disk evolution. We measured the 36Cl-36S-isotope abundance in wadalite (<15 μm), a secondary chlorine-bearing mineral found in calcium-aluminum-rich inclusions (CAIs) in the Allende CV chondrite, to decipher the origin of the SLR 36Cl (τ 1/2 ~ 3 × 105 yr) in the early solar system. Its presence, initial abundance, and the noticeable decoupling from 26Al raise serious questions about the origin of SLRs. The inferred initial 36Cl abundance for wadalite, corresponding to a 36Cl/35Cl ratio of (1.81 ± 0.13) × 10-5, is the highest 36Cl abundance ever reported in any early solar system material. The high level of 36Cl in wadalite and the absence of 26Al (26Al/27Al <= 3.9 × 10-6) in co-existing grossular (1) unequivocally support the production of 36Cl by late-stage solar energetic particle irradiation in the protoplanetary disk and (2) indicates that the production of 36Cl, recorded by wadalite, is unrelated to the origin of 26Al and other SLRs (10Be, 53Mn) recorded by primary minerals of CAIs and chondrules. We infer that 36Cl was largely produced by irradiation of a volatile-rich reservoir in an optically thin protoplanetary disk adjacent to the region in which the CV chondrite parent asteroid accreted while the Sun was a weak T Tauri star. Subsequently, 36Cl accreted into the Allende CV chondrite together with condensed water ices.

  6. FORMATION OF THE SHORT-LIVED RADIONUCLIDE {sup 36}Cl IN THE PROTOPLANETARY DISK DURING LATE-STAGE IRRADIATION OF A VOLATILE-RICH RESERVOIR

    SciTech Connect

    Jacobsen, Benjamin; Yin Qingzhu; Matzel, Jennifer; Hutcheon, Ian D.; Ramon, Erick C.; Weber, Peter K.; Krot, Alexander N.; Nagashima, Kazuhide; Ishii, Hope A.; Ciesla, Fred J.

    2011-04-20

    Short-lived radionuclides (SLRs) in the early solar system provide fundamental insight into protoplanetary disk evolution. We measured the {sup 36}Cl-{sup 36}S-isotope abundance in wadalite (<15 {mu}m), a secondary chlorine-bearing mineral found in calcium-aluminum-rich inclusions (CAIs) in the Allende CV chondrite, to decipher the origin of the SLR {sup 36}Cl ({tau}{sub 1/2} {approx} 3 x 10{sup 5} yr) in the early solar system. Its presence, initial abundance, and the noticeable decoupling from {sup 26}Al raise serious questions about the origin of SLRs. The inferred initial {sup 36}Cl abundance for wadalite, corresponding to a {sup 36}Cl/{sup 35}Cl ratio of (1.81 {+-} 0.13) x 10{sup -5}, is the highest {sup 36}Cl abundance ever reported in any early solar system material. The high level of {sup 36}Cl in wadalite and the absence of {sup 26}Al ({sup 26}Al/{sup 27}Al {<=} 3.9 x 10{sup -6}) in co-existing grossular (1) unequivocally support the production of {sup 36}Cl by late-stage solar energetic particle irradiation in the protoplanetary disk and (2) indicates that the production of {sup 36}Cl, recorded by wadalite, is unrelated to the origin of {sup 26}Al and other SLRs ({sup 10}Be, {sup 53}Mn) recorded by primary minerals of CAIs and chondrules. We infer that {sup 36}Cl was largely produced by irradiation of a volatile-rich reservoir in an optically thin protoplanetary disk adjacent to the region in which the CV chondrite parent asteroid accreted while the Sun was a weak T Tauri star. Subsequently, {sup 36}Cl accreted into the Allende CV chondrite together with condensed water ices.

  7. Using 36Cl data to quantify the paleorecharge in arid region. Example of the North Western Saharan Aquifer System.

    NASA Astrophysics Data System (ADS)

    Oriane Petersen, Jade; Deschamps, Pierre; Gonçalvès, Julio; Hamelin, Bruno; Michelot, Jean-Luc; Guendouz, Abdelhamid; Zouari, Kamel

    2014-05-01

    A comprehensive understanding of large-scale systems such as multi-layer aquifers in sedimentary basins (e.g. North Western Saharan Aquifer System -NWSAS- or the Great Artesian Basin) requires to investigate the recharge history to Quaternary timescale. In fact, for such systems, the residence time of groundwater is often in the order of 100 000 years to 1 million years, the recharge occurring during past, intermittent humid periods paced by the quaternary climatic cycles. In this study, we propose to reconstruct the history of the recharge over the Continental Intercalaire (CI) aquifer, one of the two main aquifers of the NWSAS. It extends over 1 million km2, shared between Algeria, Tunisia and Libya. We focus on the main recharge area of the CI aquifer located in the Algerian Atlas Mountains. Existing chlorine-36 data (36Cl half-life: 301 ka) indicate that groundwater residence time in this system is around 1 million years. A set of modeling approaches is combined to model the theoretical 36Cl/Cl distribution within the aquifer as a function of different recharge scenarios. Seventeen 36Cl/Cl data from two distinct flowpaths provide temporal constraints on groundwater ages. A simple piston model is used to simulate the distribution of theoretical 36Cl along these flowlines as a function of the distance from the outcrop with respect to a recharge scenario. Simplified climatic scenarios are constructed considering humid periods only during interglacial cycles. This allows to define 9 recharge rates (Rh(i)) associated to last interglacials (from marine isotope stages MIS1 to MIS19). In addition, a constant recharge Rg was considered during glacial periods. For each recharge scenario, the recharge values are constrained by using a Markov Chain Monte Carlo (MCMC) inversion, which yields the best agreement between measured and modeled 36Cl/Cl. This MCMC probabilistic inversion approach allows identifying plausible sets of the 10 parameters (9 Rh(i) and Rg) involved in

  8. Toward determining the uncertainties associated with the seismic histories retrieved from in situ 36Cl cosmogenic nuclide fault scarp dating: model reappraisal.

    NASA Astrophysics Data System (ADS)

    Tesson, Jim; Benedetti, Lucilla

    2016-04-01

    How the past seismic activity of faults has varied over the last 20 ky is a crucial information for seismic hazard assessment and for the understanding of fault-interaction processes. Chlorine 36 in situ produced cosmogenic nuclide is increasingly used to retrieve past earthquakes histories on seismically exhumed limestone normal fault-scarps. Schlagenhauf et al. in 2010 developed a modeling code with a forward approach enabling the test of scenarii generated with a priori constraints (number of events, age and slip of events and pre-exposure time). The main shortcomings of this forward approach were the limited number of testable scenarii and the difficulty to derive the associated uncertainties. We present here a reappraisal methodology with an inverse approach using an optimization algorithm. This modelling approach enables 1-exploring the parameter space (age and slip of events), 2-finding the best scenario without a priori constraints and 3-precisely quantifying the associated uncertainties by determining the range of plausible models. Through a series of synthetic tests, we observed that the algorithm revealed a great capacity to constrain event slips and ages in a short computational time (several hours) with an accuracy that can reach 0.1 ky and 0.5 m for the age and slip of exhumation event, respectively. We also explore the influence of the pre-exposure history (amount of 36Cl accumulated when the sampled fault-plane was still buried under the colluvial wedge) and show that it has an important impact on the generated scenarii. This new modeling also allows now to accurately determining this parameter. Finally, the results show that any given [36Cl] profile results in a unique exhumation solution. We then apply this new model to the Magnola fault (Italy) dataset (Schlgenhauf et al. 2011). In agreement the previously published results, our model also results in 3 intense periods of seismic activity. However, the contribution of the pre-exposure history is

  9. The use of multiple probe molecules for the study of the acid-base properties of aluminium hydroxyfluoride having the hexagonal tungsten bronze structure: FTIR and [36Cl] radiotracer studies.

    PubMed

    Dambournet, Damien; Leclerc, Hervé; Vimont, Alexandre; Lavalley, Jean-Claude; Nickkho-Amiry, Mahmood; Daturi, Marco; Winfield, John M

    2009-03-01

    The combination of several probe molecules has enabled the construction of a detailed picture of the surface of aluminium hydroxyl fluoride, AlF(2.6)(OH)(0.4), which has the hexagonal tungsten bronze (HTB) structure. Using pyridine as a probe leads to features at 1628 cm(-1), ascribed to very strong Lewis acid sites, and at 1620-1623 cm(-1), which is the result of several different types of Lewis sites. This heterogeneity is indicated also from CO adsorption at 100 K; the presence of five different types of Lewis site is deduced and is suggested to arise from the hydroxylated environment. Brønsted acid sites of medium strength are indicated by adsorption of lutidine and CO. Adsorption of lutidine occurs at OH groups, which are exposed at the surface and CO reveals that these OH groups have a single environment that can be correlated with their specific location inside the bulk, assuming that the surface OH group may reflect the bulk OH periodicity. A correlation between the data obtained from CO and pyridine molecules has been established using co-adsorption experiments, which also highlight the inductive effect produced by pyridine. Adsorption of the strong Brønsted acid, anhydrous hydrogen chloride, detected by monitoring the beta(-) emission of [(36)Cl]-HCl at the surface, indicates that surface hydroxyl groups can behave also as a Brønsted base and that H(2)O-HCl interactions, either within the hexagonal channels or at the surface are possible. Finally, the formation of strongly bound H(36)Cl as a result of the room temperature dehydrochlorination of [(36)Cl]-labelled tert-butyl chloride provides additional evidence that HTB-AlF(2.6)(OH)(0.4) can behave as a Lewis acid. PMID:19224038

  10. Seismic slip history of the Pizzalto fault (Central Apennines, Italy) using in situ 36Cl cosmogenic dating

    NASA Astrophysics Data System (ADS)

    Delli Rocioli, Mattia; Pace, Bruno; Benedetti, Lucilla; Visini, Francesco; Guillou, Valery; Bourlès, Didier; Arnorld, Maurice; Aumaître, Georges; Keddadouche, Karim

    2013-04-01

    A prerequisite to constrain fault-based and time-dependent earthquake rupture forecast models is to acquire data on the past large earthquake frequency on an individual seismogenic source. Here we present a paleoseismological study on the Pizzalto fault using the in situ produced cosmogenic nuclide 36Cl (Schlagenhauf et al., 2011). The Pizzalto fault, located in central Italy about 50 km southeast of the epicenter of L'Aquila 2009 earthquake, is about 12 km long, SW dipping and belongs to the 30 km long Rotella-Aremogna active normal fault system. Recent activity along the Pizzalto fault is suggested by the presence of a continuous and linear 2 to 5 m high limestone fault scarp that was sampled every 10 cm at a site located in its particularly well-preserved central portion. 49 samples have been chemically processed and measured, and their 36Cl and Cl concentrations have been determined using isotope dilution mass spectrometry at the French AMS national facility ASTER located at CEREGE. Modeling the in situ 36Cl concentration with the scarp height allow deciphering the age and slip of the last major earthquake events on the fault. To derive those earthquake parameters, we used the published Matlab code from Schlagenhauf et al. (2011) that we implemented with a Monte Carlo approach to explore a large number of earthquake recurrence scenarios varying both the number of events, their slip and their ages. The "a priori" constraints input in the Monte Carlo code were: 1-the number of events, which is given by the stacking of individual probability density functions (assumed to be Gaussian) of each sample concentration; and, 2-the cumulative slip that should be equal to the height of the fault scarp. The first results show that 36Cl concentrations are reproduced better considering five events occurring over the last 5 ka and a previous one at about 13 ka. This suggests that most earthquake events clustered during a period of intense seismic activity preceded by a longer

  11. Slip rate variability over the Holocene period in the middle Aterno fault system (Italy), retrieved from in situ 36Cl cosmogenic nuclide dating of exhumed fault-plane.

    NASA Astrophysics Data System (ADS)

    Tesson, Jim; Benedetti, Lucilla; Pucci, Stefano; Villani, Fabio; Bourles, Didier; Keddadouche, Karim; Aumaitre, Georges

    2016-04-01

    Numerous numerical modeling studies have described and quantified non-stochastic spatio-temporal variations of earthquake occurrences within fault-networks, such as temporal clustered earthquakes or fault synchronization. However, very few long-enough paleoseismological and geological records are available to test those models against well-constrained dataset and thus account for such variability in the fault behavior. The prerequisites for improving our understanding of fault-rupture processes and thus our capacity to better assess seismic hazard are to acquire paleoseismological records that enable to derive both long-term slip-rate and short-term variability, on a large population of faults and/or within a fault system. These conditions met in Central Apennines, an extensional province where substantial paleoseismological dataset accurately described the Holocene seismic history of a dense network of normal faults. In this study we use 36Cl in situ cosmogenic nuclide to retrieve the seismic history of 3 faults belonging to the Middle Aterno fault system, from north to south: the Bazzano fault, the Roccapreturo fault and the Sulmona fault, a portion of which ruptured during the 2009 L'Aquila earthquake in Italy. We use a new modeling approach to determine the age and slip of past seismic events from the 36Cl concentration profiles. This model is based on an inverse approach and uses an optimization algorithm enabling all the parameter space (number of events, age and slip of events, pre-exposure) to be explored without a priori constraints (see Tesson et al. in session TS4.2/NH4.16/SM3.8). Using this new approach, we precisely determine the slip events occurrences over the Holocene period of those three faults. The results indicate that the three studied faults have ruptured between 4.5 and 5.5 ka, while the southernmost part of the system has also ruptured between at 1.5-3 ka (Sulmona fault and southern segment of Roccapreturo). Those results are in agreement

  12. Tritium and 36Cl as constraints on fast fracture flow and percolation flux in the unsaturated zone at Yucca Mountain

    NASA Astrophysics Data System (ADS)

    Guerin, Marianne

    2001-10-01

    An analysis of tritium and 36Cl data collected at Yucca Mountain, Nevada suggests that fracture flow may occur at high velocities through the thick unsaturated zone. The mechanisms and extent of this "fast flow" in fractures at Yucca Mountain are investigated with data analysis, mixing models and several one-dimensional modeling scenarios. The model results and data analysis provide evidence substantiating the weeps model [Gauthier, J.H., Wilson, M.L., Lauffer, F.C., 1992. Proceedings of the Third Annual International High-level Radioactive Waste Management Conference, vol. 1, Las Vegas, NV. American Nuclear Society, La Grange Park, IL, pp. 891-989] and suggest that fast flow in fractures with minimal fracture-matrix interaction may comprise a substantial proportion of the total infiltration through Yucca Mountain. Mixing calculations suggest that bomb-pulse tritium measurements, in general, represent the tail end of travel times for thermonuclear-test-era (bomb-pulse) infiltration. The data analysis shows that bomb-pulse tritium and 36Cl measurements are correlated with discrete features such as horizontal fractures and areas where lateral flow may occur. The results presented here imply that fast flow in fractures may be ubiquitous at Yucca Mountain, occurring when transient infiltration (storms) generates flow in the connected fracture network.

  13. Tritium and 36Cl as constraints on fast fracture flow and percolation flux in the unsaturated zone at Yucca Mountain.

    PubMed

    Guerin, M

    2001-10-01

    An analysis of tritium and 36Cl data collected at Yucca Mountain, Nevada suggests that fracture flow may occur at high velocities through the thick unsaturated zone. The mechanisms and extent of this "fast flow" in fractures at Yucca Mountain are investigated with data analysis, mixing models and several one-dimensional modeling scenarios. The model results and data analysis provide evidence substantiating the weeps model [Gauthier, J.H., Wilson, M.L., Lauffer, F.C., 1992. Proceedings of the Third Annual International High-level Radioactive Waste Management Conference, vol. 1, Las Vegas, NV. American Nuclear Society, La Grange Park, IL, pp. 891-989] and suggest that fast flow in fractures with minimal fracture-matrix interaction may comprise a substantial proportion of the total infiltration through Yucca Mountain. Mixing calculations suggest that bomb-pulse tritium measurements, in general, represent the tail end of travel times for thermonuclear-test-era (bomb-pulse) infiltration. The data analysis shows that bomb-pulse tritium and 36Cl measurements are correlated with discrete features such as horizontal fractures and areas where lateral flow may occur. The results presented here imply that fast flow in fractures may be ubiquitous at Yucca Mountain, occurring when transient infiltration (storms) generates flow in the connected fracture network. PMID:11588829

  14. A comparison of groundwater dating with 81Kr, 36Cl and 4He in four wells of the Great Artesian Basin, Australia

    NASA Astrophysics Data System (ADS)

    Lehmann, B. E.; Love, A.; Purtschert, R.; Collon, P.; Loosli, H. H.; Kutschera, W.; Beyerle, U.; Aeschbach-Hertig, W.; Kipfer, R.; Frape, S. K.; Herczeg, A.; Moran, J.; Tolstikhin, I. N.; Gröning, M.

    2003-06-01

    The isotopic ratios 81Kr/Kr and 36Cl/Cl and the 4He concentrations measured in groundwater from four artesian wells in the western part of the Great Artesian Basin (GAB) in Australia are discussed. Based on radioactive decay along a water flow path the 81Kr/Kr ratios are directly converted to groundwater residence times. Results are in a range of 225-400 kyr with error bars in the order of 15% primarily due to counting statistics in the cyclotron accelerator mass spectrometer measurement. Additional uncertainties from subsurface production and/or exchange with stagnant porewaters in the confining shales appear to be of the same order of magnitude. These 81Kr ages are then used to calibrate the 36Cl and the 4He dating methods. Based on elemental analyses of rock samples from the sandstone aquifer as well as from the confining Bulldog shale the in situ flux of thermal neutrons and the corresponding 3He/ 4He and 36Cl/Cl ratios are calculated. From a comparison of: (i) the 3He/ 4He ratios measured in the groundwater samples with the calculated in situ ratios in rocks and (ii) the measured δ 37Cl ratios with the 4He concentrations measured in groundwater it is concluded that both helium and chloride are most likely added to the aquifer from sources in the stagnant porewaters of the confining shale by diffusion and/or mixing. Based on this 'working hypothesis' the 36Cl transport equation in groundwater is solved taking into account: (i) radioactive decay, (ii) subsurface production in the sandstone aquifer (with an in situ 36Cl/Cl ratio of 6×10 -15) and (iii) addition of chloride from a source in the confining shale (with a 36Cl/Cl ratio of 13×10 -15). Lacking better information it is assumed that the chloride concentration increased linearly with time from an (unknown) initial value Ci to its measured present value C= Ci+ Ca, where Ca represents the (unknown) amount of chloride added from subsurface sources. Using the 81Kr ages of the four groundwater samples and a

  15. The Hiroshima thermal-neutron discrepancy for (36)Cl at large distances. Part II: Natural in situ production as a source.

    PubMed

    Nolte, Eckehart; Huber, Thomas; Rühm, Werner; Kato, Kazuo; Lazarev, Vitali; Schultz, Ludolf

    2005-10-01

    For Hiroshima, a large discrepancy between calculated and measured thermal-neutron fluences had been reported in the past, for distances to the epicenter larger than about 1,000 m. To be more specific, measured (36)Cl concentrations in environmental samples from Hiroshima were too large at these distances, and the ratio of measured to calculated values reached about 70, at a distance of 1,800 m. In an attempt to identify other sources that might also produce (36)Cl in Hiroshima samples, the role of cosmic rays and of neutrons from natural terrestrial sources was investigated. Four reaction mechanisms were taken into account: spallation reactions of the nucleonic (hadronic) component of the cosmic rays on potassium (K) and calcium (Ca) in the sample material, particle emission after nuclear capture of negative muons by K and Ca, reactions of fast-muon induced electromagnetic, and hadronic showers with K and Ca, and neutron capture reactions with (35)Cl in the sample where the neutrons originate from the above three reaction mechanisms and from uranium and thorium decay. These mechanisms are physically described and mathematically quantified. It is shown that among those parameters important for the production of (36)Cl in granite, the chemical composition of the sample, the depth in the quarry where the sample had initially been taken, and the erosion rate at the site of the quarry are most important. Based on these physical, chemical, and geological parameters, (36)Cl concentrations were calculated for different types of granite that are typical for the Hiroshima area. In samples that were of these granite types and that had not been exposed to atomic bomb(A-bomb) neutrons, the (36)Cl concentration was also determined experimentally by means of accelerator mass spectrometry, and good agreement was found with the calculated values. The (36)Cl signal due to natural in situ production was also calculated in granite samples that had been exposed to A-bomb neutrons at

  16. Radiation exposure for manned Mars surface missions

    SciTech Connect

    Simonsen, L.C.; Nealy, J.E.; Townsend, L.W.; Wilson, J.W.

    1990-03-01

    The Langley cosmic ray transport code and the Langley nucleon transport code (BRYNTRN) are used to quantify the transport and attenuation of galactic cosmic rays (GCR) and solar proton flares through the Martian atmosphere. Surface doses are estimated using both a low density and a high density carbon dioxide model of the atmosphere which, in the vertical direction, provides a total of 16 g/sq cm and 22 g/sq cm of protection, respectively. At the Mars surface during the solar minimum cycle, a blood-forming organ (BFO) dose equivalent of 10.5 to 12 rem/yr due to galactic cosmic ray transport and attenuation is calculated. Estimates of the BFO dose equivalents which would have been incurred from the three large solar flare events of August 1972, November 1960, and February 1956 are also calculated at the surface. Results indicate surface BFO dose equivalents of approximately 2 to 5, 5 to 7, and 8 to 10 rem per event, respectively. Doses are also estimated at altitudes up to 12 km above the Martian surface where the atmosphere will provide less total protection.

  17. Radiation exposure for manned Mars surface missions

    NASA Technical Reports Server (NTRS)

    Simonsen, Lisa C.; Nealy, John E.; Townsend, Lawrence W.; Wilson, John W.

    1990-01-01

    The Langley cosmic ray transport code and the Langley nucleon transport code (BRYNTRN) are used to quantify the transport and attenuation of galactic cosmic rays (GCR) and solar proton flares through the Martian atmosphere. Surface doses are estimated using both a low density and a high density carbon dioxide model of the atmosphere which, in the vertical direction, provides a total of 16 g/sq cm and 22 g/sq cm of protection, respectively. At the Mars surface during the solar minimum cycle, a blood-forming organ (BFO) dose equivalent of 10.5 to 12 rem/yr due to galactic cosmic ray transport and attenuation is calculated. Estimates of the BFO dose equivalents which would have been incurred from the three large solar flare events of August 1972, November 1960, and February 1956 are also calculated at the surface. Results indicate surface BFO dose equivalents of approximately 2 to 5, 5 to 7, and 8 to 10 rem per event, respectively. Doses are also estimated at altitudes up to 12 km above the Martian surface where the atmosphere will provide less total protection.

  18. Photodocumentation of long-term lunar surface exposure experiment

    NASA Technical Reports Server (NTRS)

    Hoerz, F.

    1974-01-01

    Preflight photographs of selected Apollo 17 equipment taken for use in determining the effects on various surfaces of long-term exposure to the lunar environment are presented. Photographs of the articles deployed on the lunar surface also are included. The photographic procedure and the coding system used for the photodocumentation are explained. Other documentation measures planned to obtain items for use as controls in projected analyses are discussed.

  19. Smoothing Polymer Surfaces by Solvent-Vapor Exposure

    NASA Astrophysics Data System (ADS)

    Anthamatten, Mitchell

    2003-03-01

    Ultra-smooth polymer surfaces are of great importance in a large body of technical applications such as optical coatings, supermirrors, waveguides, paints, and fusion targets. We are investigating a simple approach to controlling surface roughness: by temporarily swelling the polymer with solvent molecules. As the solvent penetrates into the polymer, its viscosity is lowered, and surface tension forces drive surface flattening. To investigate sorption kinetics and surface-smoothing phenomena, a series of vapor-deposited poly(amic acid) films were exposed to dimethyl sulfoxide vapors. During solvent exposure, the surface topology was continuously monitored using light interference microscopy. The resulting power spectra indicate that high-frequency defects smooth faster than low-frequency defects. This frequency dependence was studied by depositing polymer films onto a series of 2D sinusoidal surfaces and performing smoothing experiments. Results show that the amplitudes of the sinusoidal surfaces decay exponentially with solvent exposure time, and the exponential decay constants are proportional to surface frequency. This work was performed under the auspices of the U.S. Department of Energy by the University of California Lawrence Livermore National Laboratory under contract No. W-7405-Eng-48.

  20. Vibrations and reorientations of NH3 molecules in [Mn(NH3)6](ClO4)2 studied by infrared spectroscopy and theoretical (DFT) calculations.

    PubMed

    Hetmańczyk, Joanna; Hetmańczyk, Łukasz; Migdał-Mikuli, Anna; Mikuli, Edward

    2015-02-01

    The vibrational and reorientational motions of NH3 ligands and ClO4(-) anions were investigated by Fourier transform middle-infrared spectroscopy (FT-IR) in the high- and low-temperature phases of [Mn(NH3)6](ClO4)2. The temperature dependencies of full width at half maximum (FWHM) of the infrared bands at: 591 and 3385cm(-1), associated with: ρr(NH3) and νas(N-H) modes, respectively, indicate that there exist fast (correlation times τR≈10(-12)-10(-13)s) reorientational motions of NH3 ligands, with a mean values of activation energies: 7.8 and 4.5kJmol(-1), in the phase I and II, respectively. These reorientational motions of NH3 ligands are only slightly disturbed in the phase transition region and do not significantly contribute to the phase transition mechanism. Fourier transform far-infrared and middle-infrared spectra with decreasing of temperature indicated characteristic changes at the vicinity of PT at TC(c)=137.6K (on cooling), which suggested lowering of the crystal structure symmetry. Infrared spectra of [Mn(NH3)6](ClO4)2 were recorded and interpreted by comparison with respective theoretical spectra calculated using DFT method (B3LYP functional, LANL2DZ ECP basis set (on Mn atom) and 6-311+G(d,p) basis set (on H, N, Cl, O atoms) for the isolated equilibrium two models (Model 1 - separate isolated [Mn(NH3)6](2+) cation and ClO4(-) anion and Model 2 - [Mn(NH3)6(ClO4)2] complex system). Calculated optical spectra show a good agreement with the experimental infrared spectra (FT-FIR and FT-MIR) for the both models. PMID:25459713

  1. Vibrations and reorientations of NH3 molecules in [Mn(NH3)6](ClO4)2 studied by infrared spectroscopy and theoretical (DFT) calculations

    NASA Astrophysics Data System (ADS)

    Hetmańczyk, Joanna; Hetmańczyk, Łukasz; Migdał-Mikuli, Anna; Mikuli, Edward

    2015-02-01

    The vibrational and reorientational motions of NH3 ligands and ClO4- anions were investigated by Fourier transform middle-infrared spectroscopy (FT-IR) in the high- and low-temperature phases of [Mn(NH3)6](ClO4)2. The temperature dependencies of full width at half maximum (FWHM) of the infrared bands at: 591 and 3385 cm-1, associated with: ρr(NH3) and νas(N-H) modes, respectively, indicate that there exist fast (correlation times τR ≈ 10-12-10-13 s) reorientational motions of NH3 ligands, with a mean values of activation energies: 7.8 and 4.5 kJ mol-1, in the phase I and II, respectively. These reorientational motions of NH3 ligands are only slightly disturbed in the phase transition region and do not significantly contribute to the phase transition mechanism. Fourier transform far-infrared and middle-infrared spectra with decreasing of temperature indicated characteristic changes at the vicinity of PT at TCc = 137.6 K (on cooling), which suggested lowering of the crystal structure symmetry. Infrared spectra of [Mn(NH3)6](ClO4)2 were recorded and interpreted by comparison with respective theoretical spectra calculated using DFT method (B3LYP functional, LANL2DZ ECP basis set (on Mn atom) and 6-311 + G(d,p) basis set (on H, N, Cl, O atoms) for the isolated equilibrium two models (Model 1 - separate isolated [Mn(NH3)6]2+ cation and ClO4- anion and Model 2 - [Mn(NH3)6(ClO4)2] complex system). Calculated optical spectra show a good agreement with the experimental infrared spectra (FT-FIR and FT-MIR) for the both models.

  2. Intercomparison study on (152)Eu gamma ray and (36)Cl AMS measurements for development of the new Hiroshima-Nagasaki Atomic Bomb Dosimetry System 2002 (DS02).

    PubMed

    Hoshi, M; Endo, S; Tanaka, K; Ishikawa, M; Straume, T; Komura, K; Rühm, W; Nolte, E; Huber, T; Nagashima, Y; Seki, R; Sasa, K; Sueki, K; Fukushima, H; Egbert, S D; Imanaka, T

    2008-07-01

    In the process of developing a new dosimetry system for atomic bomb survivors in Hiroshima and Nagasaki (DS02), an intercomparison study between (152)Eu and (36)Cl measurements was proposed, to reconcile the discrepancy previously observed in the Hiroshima data between measurements and calculations of thermal neutron activation products. Nine granite samples, exposed to the atomic-bomb radiation in Hiroshima within 1,200 m of the hypocenter, as well as mixed standard solutions containing known amounts of europium and chlorine that were neutron-activated by a (252)Cf source, were used for the intercomparison. Gamma-ray spectrometry for (152)Eu was carried out with ultra low-background Ge detectors at the Ogoya Underground Laboratory, Kanazawa University, while three laboratories participated in the (36)Cl measurement using accelerator mass spectrometry (AMS): The Technical University of Munich, Germany, the Lawrence Livermore National Laboratory, USA and the University of Tsukuba, Japan. Measured values for the mixed standard solutions showed good agreement among the participant laboratories. They also agreed well with activation calculations, using the neutron fluences monitored during the (252)Cf irradiation, and the corresponding activation cross-sections taken from the JENDL-3.3 library. The measured-to-calculated ratios obtained were 1.02 for (152)Eu and 0.91-1.02 for (36)Cl, respectively. Similarly, the results of the granite intercomparison indicated good agreement with the DS02 calculation for these samples. An average measured-to-calculated ratio of 0.98 was obtained for all granite intercomparison measurements. The so-called neutron discrepancy that was previously observed and that which included increasing measured-to-calculated ratios for thermal neutron activation products for increasing distances beyond 1,000 m from the hypocenter was not seen in the results of the intercomparison study. The previously claimed discrepancy could be explained by

  3. Ion irradiation of 37Cl implanted nuclear graphite: Effect of the energy deposition on the chlorine behavior and consequences for the mobility of 36Cl in irradiated graphite

    NASA Astrophysics Data System (ADS)

    Toulhoat, N.; Moncoffre, N.; Bérerd, N.; Pipon, Y.; Blondel, A.; Galy, N.; Sainsot, P.; Rouzaud, J.-N.; Deldicque, D.

    2015-09-01

    Graphite is used in many types of nuclear reactors due to its ability to slow down fast neutrons without capturing them. Whatever the reactor design, the irradiated graphite waste management has to be faced sooner or later regarding the production of long lived or dose determining radioactive species such as 14C, 3H or 36Cl. The first carbon dioxide cooled, graphite moderated nuclear reactors resulted in a huge quantity of irradiated graphite waste for which the management needs a previous assessment of the radioactive inventory and the radionuclide's location and speciation. As the detection limits of usual spectroscopic methods are generally not adequate to detect the low concentration levels (<1 ppm) of the radionuclides, we used an indirect approach based on the implantation of 37Cl, to simulate the presence of 36Cl. Our previous studies show that temperature is one of the main factors to be considered regarding the structural evolution of nuclear graphite and chlorine mobility during reactor operation. However, thermal release of chlorine cannot be solely responsible for the depletion of the 36Cl inventory. We propose in this paper to study the impact of irradiation and its synergetic effects with temperature on chlorine release. Indeed, the collision of the impinging neutrons with the graphite matrix carbon atoms induces mainly ballistic collisions. However, a small part of the recoil carbon atom energy is also transferred to the lattice through electronic excitation. This paper aims at elucidating the effects of the different irradiation regimes (ballistic and electronic) using ion irradiation, on the mobility of implanted 37Cl, taking into account the initial disorder level of the nuclear graphite.

  4. Testing a luminescence surface-exposure dating technique

    NASA Astrophysics Data System (ADS)

    Gliganic, Luke A.; Meyer, Michael; Gehring, Sebastian

    2016-04-01

    Recent work has shown that the relationship between the luminescence signal (optically stimulated [OSL] and infra-red stimulated [IRSL]) and depth into a rock surface can be used to estimate the length of time since that rock surface has been exposed to sunlight (Sohbati et al., 2012), thus serving as a means for surface-exposure dating. Despite the potential of this new dating tool, few published studies have tested or used this technique. Here, we present the results of two tests of the method. First, we perform laboratory bleaching experiments using two unexposed bedrock samples of different lithologies (granite and quartzite). Sub-samples were bleached for various durations (0 to 100,000 s) in a solar simulator, and IRSL/OSL-depth profiles were measured and fitted using the model of Sohbati et al. (2012). Results of fitting for each sub-sample were then compared. Second, we used a granite boulder from a known age moraine (1850 CE) to test the reproducibility of bleaching depth curves. Multiple cores were collected from the same ~5 cm2 surface area of the boulder, and IRSL-depth profiles were measured and modelled. While our systematic tests confirm the general physical basis of luminescence surface-exposure dating method, we found unexpected scatter in both adjacent bleaching depth curves and the fitting parameters of isochronous rock surfaces for some of our samples. Potential sources of error, including small-scale lithological variabilities and implications for accuracy and precision of the method are discussed. Sohbati, R., Murray, A.S., Chapot, M.S., Jain, M., Pederson, J. (2012) Optically stimulated luminescence (OSL) as a chronometer for surface exposure dating. Journal of Geophysical Research 117 (B9), B09202. doi.org/10.1029/2012JB009383.

  5. Exploring the cliff retreat response to base level change using SFM photogrammetry and cosmogenic 36Cl, Coal Cliffs, Utah, USA

    NASA Astrophysics Data System (ADS)

    Sheehan, C.; Ward, D.

    2015-12-01

    The retreat of cliffbands is an important erosional process within the relatively undeformed sedimentary layers of the Colorado Plateau. Many iconic cliff landforms, including those of Monument Valley and Grand Canyon, are maintained by the interaction of these different rock types. A several kilometer thickness of incised sandstone and shale formations allow this region to act as a natural laboratory for studying the effects of variable lithologies on landscape evolution. Cliffband morphology and retreat on the plateau are controlled by several factors that may vary over time and space, including lithology, rate and distribution of rockfall debris, bedrock structure, baselevel, and climate. The relative importance of each factor in setting rates of cliff retreat are not entirely clear. Because regional headwaters are commonly sourced at cliff bases, these landforms are often the final and slowest areas to respond to baselevel changes, allowing rockfall and other local stochastic processes to overwhelm the erosional response to a baselevel forcing. The roles of these processes are difficult to assess because very few measurements of retreat rates over geomorphic timescales (103-106 years) have been produced, and thus changes in cliffband position through time have only been constrained by inferences made from the regional erosional history. Here, we control for climate and rock type by focusing on a continuous, 40-kilometer section of the lithologically consistent Coal Cliffs in Emery County, Utah. This area presents several natural experiments illustrating cliffband response to different forcings, including relict surfaces reflecting a baselevel change, drainage divides across which the adjustment to base level change may be asynchronous, a zone wherein the caprock layer has been removed by backscarp erosion, and a generally continuous gradient in cliff height from 50 to >200 meters along the cliffline. We employ terrestrial Cl36 exposure dating on terraces, talus

  6. Activation Measurements for Thermal Neutrons, U.S. Measurements of 36Cl in Mineral Samples from Hiroshima and Nagasaki; and Measurement of 63 Ni in Copper Samples From Hiroshima by Accelerator Mass Spectrometry

    SciTech Connect

    Tore Straume; Alfredo A. Marchetti; Stephen D. Egbert; James A. Roberts; Ping Men; Shoichiro Fujita; Kiyoshi Shizuma; Masaharu Hoshi; G. Rugel; W. Ruhm; G. Korschinek; J. E. McAninch; K. L. Carroll; T. Faestermann; K. Knie; R. E. Martinelli; A. Wallner; C. Wallner

    2005-01-14

    The present paper presents the {sup 36}Cl measurement effort in the US. A large number of {sup 36}Cl measurements have been made in both granite and concrete samples obtained from various locations and distances in Hiroshima and Nagasaki. These measurements employed accelerator mass spectrometry (AMS) to quantify the number of atoms of {sup 36}Cl per atom of total Cl in the sample. Results from these measurements are presented here and discussed in the context of the DS02 dosimetry reevaluation effort for Hiroshima and Nagasaki atomic-bomb survivors. The production of {sup 36}Cl by bomb neutrons in mineral samples from Hiroshima and Nagasaki was primarily via the reaction {sup 35}Cl(n,{gamma}){sup 36}Cl. This reaction has a substantial thermal neutron cross-section (43.6 b at 0.025 eV) and the product has a long half-life (301,000 y). hence, it is well suited for neutron-activation detection in Hiroshima and Nagasaki using AMS more than 50 years after the bombings. A less important reaction for bomb neutrons, {sup 39}K(n,{alpha}){sup 36}Cl, typically produces less than 10% of the {sup 36}Cl in mineral samples such as granite and concrete, which contain {approx} 2% potassium. In 1988, only a year after the publication of the DS86 final report (Roesch 1987), it was demonstrated experimentally that {sup 36}Cl measured using AMS should be able to detect the thermal neutron fluences at the large distances most relevant to the A-bomb survivor dosimetry. Subsequent measurements in mineral samples from both Hiroshima and Nagasaki validated the experimental findings. The potential utility of {sup 36}Cl as a thermal neutron detector in Hiroshima was first presented by Haberstock et al. who employed the Munich AMS facility to measure {sup 36}Cl/Cl ratios in a gravestone from near the hypocenter. That work subsequently resulted in an expanded {sup 36}Cl effort in Germany that paralleled the US work. More recently, there have also been {sup 36}Cl measurements made by a Japanese

  7. Erosion rate study at the Allchar deposit (Macedonia) based on radioactive and stable cosmogenic nuclides (26 Al, 36 Cl, 3 He, and 21 Ne)

    PubMed Central

    Cvetković, V.; Niedermann, S.; Pejović, V.; Amthauer, G.; Boev, B.; Bosch, F.; Aničin, I.; Henning, W. F.

    2016-01-01

    Abstract This paper focuses on constraining the erosion rate in the area of the Allchar Sb‐As‐Tl‐Au deposit (Macedonia). It contains the largest known reserves of lorandite (TlAsS2), which is essential for the LORanditeEXperiment (LOREX), aimed at determining the long‐term solar neutrino flux. Because the erosion history of the Allchar area is crucial for the success of LOREX, we applied terrestrial in situ cosmogenic nuclides including both radioactive (26Al and 36Cl) and stable (3He and 21Ne) nuclides in quartz, dolomite/calcite, sanidine, and diopside. The obtained results suggest that there is accordance in the values obtained by applying 26Al, 36Cl, and 21Ne for around 85% of the entire sample collection, with resulting erosion rates varying from several tens of m/Ma to ∼165 m/Ma. The samples from four locations (L‐8 CD, L1b/R, L1c/R, and L‐4/ADR) give erosion rates between 300 and 400 m/Ma. Although these localities reveal remarkably higher values, which may be explained by burial events that occurred in part of Allchar, the erosion rate estimates mostly in the range between 50 and 100 m/Ma. This range further enables us to estimate the vertical erosion rate values for the two main ore bodies Crven Dol and Centralni Deo. We also estimate that the lower and upper limits of average paleo‐depths for the ore body Centralni Deo from 4.3 Ma to the present are 250–290 and 750–790 m, respectively, whereas the upper limit of paleo‐depth for the ore body Crven Dol over the same geological age is 860 m. The estimated paleo‐depth values allow estimating the relative contributions of 205Pb derived from pp‐neutrino and fast cosmic‐ray muons, respectively, which is an important prerequisite for the LOREX experiment. PMID:27587984

  8. Erosion rate study at the Allchar deposit (Macedonia) based on radioactive and stable cosmogenic nuclides (26Al, 36Cl, 3He, and 21Ne)

    NASA Astrophysics Data System (ADS)

    Pavićević, M. K.; Cvetković, V.; Niedermann, S.; Pejović, V.; Amthauer, G.; Boev, B.; Bosch, F.; Aničin, I.; Henning, W. F.

    2016-02-01

    This paper focuses on constraining the erosion rate in the area of the Allchar Sb-As-Tl-Au deposit (Macedonia). It contains the largest known reserves of lorandite (TlAsS2), which is essential for the LORanditeEXperiment (LOREX), aimed at determining the long-term solar neutrino flux. Because the erosion history of the Allchar area is crucial for the success of LOREX, we applied terrestrial in situ cosmogenic nuclides including both radioactive (26Al and 36Cl) and stable (3He and 21Ne) nuclides in quartz, dolomite/calcite, sanidine, and diopside. The obtained results suggest that there is accordance in the values obtained by applying 26Al, 36Cl, and 21Ne for around 85% of the entire sample collection, with resulting erosion rates varying from several tens of m/Ma to ˜165 m/Ma. The samples from four locations (L-8 CD, L1b/R, L1c/R, and L-4/ADR) give erosion rates between 300 and 400 m/Ma. Although these localities reveal remarkably higher values, which may be explained by burial events that occurred in part of Allchar, the erosion rate estimates mostly in the range between 50 and 100 m/Ma. This range further enables us to estimate the vertical erosion rate values for the two main ore bodies Crven Dol and Centralni Deo. We also estimate that the lower and upper limits of average paleo-depths for the ore body Centralni Deo from 4.3 Ma to the present are 250-290 and 750-790 m, respectively, whereas the upper limit of paleo-depth for the ore body Crven Dol over the same geological age is 860 m. The estimated paleo-depth values allow estimating the relative contributions of 205Pb derived from pp-neutrino and fast cosmic-ray muons, respectively, which is an important prerequisite for the LOREX experiment.

  9. Calibration of cosmogenic noble gas production based on 36Cl-36Ar ages. Part 2. The 81Kr-Kr dating technique

    NASA Astrophysics Data System (ADS)

    Leya, I.; Dalcher, N.; Vogel, N.; Wieler, R.; Caffee, M. W.; Welten, K. C.; Nishiizumi, K.

    2015-11-01

    We calibrated the 81Kr-Kr dating system for ordinary chondrites of different sizes using independent shielding-corrected 36Cl-36Ar ages. Krypton concentrations and isotopic compositions were measured in bulk samples from 14 ordinary chondrites of high petrologic type and the cosmogenic Kr component was obtained by subtracting trapped Kr from phase Q. The thus-determined average cosmogenic 78Kr/83Kr, 80Kr/83Kr, 82Kr/83Kr, and 84Kr/83Kr ratiC(Lavielle and Marti 1988; Wieler 2002). The cosmogenic 78Kr/83Kr ratio is correlated with the cosmogenic 22Ne/21Ne ratio, confirming that 78Kr/83Kr is a reliable shielding indicator. Previously, 81Kr-Kr ages have been determined by assuming the cosmogenic production rate of 81Kr, P(81Kr)c, to be 0.95 times the average of the cosmogenic production rates of 80Kr and 82Kr; the factor Y = 0.95 therefore accounts for the unequal production of the various Kr isotopes (Marti 1967a). However, Y should be regarded as an empirical adjustment. For samples whose 80Kr and 82Kr concentrations may be affected by neutron-capture reactions, the shielding-dependent cosmogenic (78Kr/83Kr)c ratio has been used instead to calculate P(81Kr)/P(83Kr), as for some lunar samples, this ratio has been shown to linearly increase with (78Kr/83Kr)c (Marti and Lugmair 1971). However, the 81Kr-Kr ages of our samples calculated with these methods are on average ~30% higher than their 36Cl-36Ar ages, indicating that most if not all the 81Kr-Kr ages determined so far are significantly too high. We therefore re-evaluated both methods to determine P(81Kr)c/P(83Kr)c. Our new Y value of 0.70 ± 0.04 is more than 25% lower than the value of 0.95 used so far. Furthermore, together with literature data, our data indicate that for chondrites, P(81Kr)c/P(83Kr)c is rather constant at 0.43 ± 0.02, at least for the shielding range covered by our samples ([78Kr/83Kr]c = 0.119-0.185; [22Ne/21Ne]c = 1.083-1.144), in contrast to the observations on lunar samples. As expected

  10. Cosmogenic 10Be and 36Cl geochronology of offset alluvial fans along the northern Death Valley fault zone: Implications for transient strain in the eastern California shear zone

    USGS Publications Warehouse

    Frankel, K.L.; Brantley, K.S.; Dolan, J.F.; Finkel, R.C.; Klinger, R.E.; Knott, J.R.; Machette, M.N.; Owen, L.A.; Phillips, F.M.; Slate, J.L.; Wernicke, B.P.

    2007-01-01

    The northern Death Valley fault zone (NDVFZ) has long been recognized as a major right-lateral strike-slip fault in the eastern California shear zone (ECSZ). However, its geologic slip rate has been difficult to determine. Using high-resolution digital topographic imagery and terrestrial cosmogenic nuclide dating, we present the first geochronologically determined slip rate for the NDVFZ. Our study focuses on the Red Wall Canyon alluvial fan, which exposes clean dextral offsets of seven channels. Analysis of airborne laser swath mapping data indicates ???297 ?? 9 m of right-lateral displacement on the fault system since the late Pleistocene. In situ terrestrial cosmogenic 10Be and 36C1 geochronology was used to date the Red Wall Canyon fan and a second, correlative fan also cut by the fault. Beryllium 10 dates from large cobbles and boulders provide a maximum age of 70 +22/-20 ka for the offset landforms. The minimum age of the alluvial fan deposits based on 36Cl depth profiles is 63 ?? 8 ka. Combining the offset measurement with the cosmogenic 10Be date yields a geologic fault slip rate of 4.2 +1.9/-1.1 mm yr-1, whereas the 36Cl data indicate 4.7 +0.9/-0.6 mm yr-1 of slip. Summing these slip rates with known rates on the Owens Valley, Hunter Mountain, and Stateline faults at similar latitudes suggests a total geologic slip rate across the northern ECSZ of ???8.5 to 10 mm yr-1. This rate is commensurate with the overall geodetic rate and implies that the apparent discrepancy between geologic and geodetic data observed in the Mojave section of the ECSZ does not extend north of the Garlock fault. Although the overall geodetic rates are similar, the best estimates based on geology predict higher strain rates in the eastern part of the ECSZ than to the west, whereas the observed geodetic strain is relatively constant. Copyright 2007 by the American Geophysical Union.

  11. ISSUES IN UNDERSTANDING DERMAL EXPOSURES RESULTING FROM CONTACT WITH CONTAMINATED SURFACES, MEASURING SURFACE CONTAMINATION, AND CHARACTERIZING TRANSFERS

    EPA Science Inventory

    Although monitoring for surface contamination in work with radioactive materials and dermal monitoring of pesticide exposure to agricultural workers have been standard practice for 50 years, regular surface sampling and dermal monitoring methods have only been applied to indust...

  12. Production of cosmogenic isotopes 7Be, 10Be, 14C, 22Na, and 36Cl in the atmosphere: Altitudinal profiles of yield functions

    NASA Astrophysics Data System (ADS)

    Poluianov, S. V.; Kovaltsov, G. A.; Mishev, A. L.; Usoskin, I. G.

    2016-07-01

    New consistent and precise computations of the production of five cosmogenic radioisotopes, 7Be, 10Be, 14C, 22Na, and 36Cl, in the Earth's atmosphere by cosmic rays are presented in the form of tabulated yield functions. For the first time, a detailed set of the altitude profiles of the production functions is provided which makes it possible to apply the results directly as input for atmospheric transport models. Good agreement with most of the earlier published works for columnar and global isotopic production rates is shown. Altitude profiles of the production are important, in particular for such tasks as studies of strong solar particle events in the past, precise reconstructions of solar activity on long-term scale, tracing air mass dynamics using cosmogenic radioisotopes, etc. As an example, computations of the 10Be deposition flux in the polar region are shown for the last decades and also for a period around 780 A.D. and confronted with the actual measurements in Greenland and Antarctic ice cores.

  13. Chlorine isotopic composition of perchlorate in human urine as a means of distinguishing among exposure sources.

    PubMed

    Poghosyan, Armen; Morel-Espinosa, Maria; Valentin-Blasini, Liza; Blount, Benjamin C; Ferreccio, Catterina; Steinmaus, Craig M; Sturchio, Neil C

    2016-05-01

    Perchlorate (ClO4(-)) is a ubiquitous environmental contaminant with high human exposure potential. Natural perchlorate forms in the atmosphere from where it deposits onto the surface of Earth, whereas synthetic perchlorate is manufactured as an oxidant for industrial, aerospace, and military applications. Perchlorate exposure can potentially cause adverse health effects in humans by interfering with the production of thyroid hormones through competitively blocking iodide uptake. To control and reduce perchlorate exposure, the contributions of different sources of perchlorate exposure need to be quantified. Thus, we demonstrate a novel approach for determining the contribution of different perchlorate exposure sources by quantifying stable and radioactive chlorine isotopes of perchlorate extracted from composite urine samples from two distinct populations: one in Atlanta, USA and one in Taltal, Chile (Atacama region). Urinary perchlorate from the Atlanta region resembles indigenous natural perchlorate from the western USA (δ(37)Cl=+4.1±1.0‰; (36)Cl/Cl=1 811 (±136) × 10(-15)), and urinary perchlorate from the Taltal, Chile region is similar to natural perchlorate in nitrate salt deposits from the Atacama Desert of northern Chile (δ(37)Cl=-11.0±1.0‰; (36)Cl/Cl=254 (±40) × 10(-15)). Neither urinary perchlorate resembled the isotopic pattern found in synthetic perchlorate. These results indicate that natural perchlorate of regional provenance is the dominant exposure source for the two sample populations, and that chlorine isotope ratios provide a robust tool for elucidating perchlorate exposure pathways. PMID:25805252

  14. Dry heat exposures of surface exposed and embedded Bacillus spores

    NASA Astrophysics Data System (ADS)

    Schubert, Wayne

    Dry heat microbial reduction (DHMR) is the primary technique used to reduce the microbial load of spacecraft and component parts. Often, manufacturing procedures require heating flight hardware to high temperatures for purposes other than planetary protection DHMR. The existing specifications, however, do not allow for additional planetary protection bioburden reduction credit if the hardware is exposed without controlled relative humidity. The intent of this study was to provide adequate data on the DHMR technique to support modification of four aspects of current requirements; expansion of acceptable time and temperature combinations used for spacecraft dry heat microbial reduction processes above 125° C, determining the effect that humidity has on spore lethality as a function of temperature, understanding the lethality for spores with exceptionally high thermal resistance and to investigate the extended exposure requirement for materials that might contain embedded microorganisms. Spores from two bacterial species were tested, B. atrophaeus ATCC 9372 and B. sp. ATCC 29669, under three conditions encompassing 5 temperature points. Embedded experiments utilized a silicone rubber polymer that is commonly used on robotic spacecraft, and surface exposed experiments were performed under both ambient and vacuum-controlled humidity conditions. The results obtained support the use of DHMR protocols that extend the maximum temperature range from 125° C to 170° C, with either controlled or ambient humidity. If implemented, this will give projects bioburden reduction credit for shorter treatments at extended temperatures, and allow spacecraft to be processed in more readily available and less expensive facilities that do not have humidity control, with significant cost and schedule benefits. The study also demonstrated that the required heating time for materials presumed to have embedded bioburden is conservative.

  15. Reconstruction of the Earthquake History of Limestone Fault Scarps in Knidos Fault Zone Using in-situ Chlorine-36 Exposure Dating and "R" Programming Language

    NASA Astrophysics Data System (ADS)

    Sahin, Sefa; Yildirim, Cengiz; Akif Sarikaya, Mehmet; Tuysuz, Okan; Genc, S. Can; Ersen Aksoy, Murat; Ertekin Doksanalti, Mustafa

    2016-04-01

    Cosmogenic surface exposure dating is based on the production of rare nuclides in exposed rocks, which interact with cosmic rays. Through modelling of measured 36Cl concentrations, we might obtain information of the history of the earthquake activity. Yet, there are several factors which may impact production of rare nuclides such as geometry of the fault, topography, geographic location of the study area, temporal variations of the Earth's magnetic field, self-cover and denudation rate on the scarp. Recently developed models provides a method to infer timing of earthquakes and slip rates on limited scales by taking into account these parameters. Our study area, the Knidos Fault Zone, is located on the Datça Peninsula in Southwestern Anatolia and contains several normal fault scarps formed within the limestone, which are appropriate to generate cosmogenic chlorine-36 (36Cl) dating models. Since it has a well-preserved scarp, we have focused on the Mezarlık Segment of the fault zone, which has an average length of 300 m and height 12-15 m. 128 continuous samples from top to bottom of the fault scarp were collected to carry out analysis of cosmic 36Cl isotopes concentrations. The main purpose of this study is to analyze factors affecting the production rates and amount of cosmogenic 36Cl nuclides concentration. Concentration of Cl36 isotopes are measured by AMS laboratories. Through the local production rates and concentration of the cosmic isotopes, we can calculate exposure ages of the samples. Recent research elucidated each step of the application of this method by the Matlab programming language (e.g. Schlagenhauf et al., 2010). It is vitally helpful to generate models of Quaternary activity of the normal faults. We, however, wanted to build a user-friendly program through an open source programing language "R" (GNU Project) that might be able to help those without knowledge of complex math programming, making calculations as easy and understandable as

  16. TRANSFER OF PESTICIDES FROM SURFACES TO FOODS FOR THE ESTIMATION OF DIETARY EXPOSURE OF CHILDREN

    EPA Science Inventory

    Since small children spend much of their time in contact with contaminated surfaces, residues of pesticides found on floors and other surfaces contribute to their aggregate exposures. Any dislodgeable pesticide residues on hands and surfaces may be transferred to foods while bei...

  17. Surface ozone exposures measured at clean locations around the world.

    PubMed

    Lefohn, A S; Krupa, S V; Winstanley, D

    1990-01-01

    For assessing the effects of air pollution on vegetation, some researchers have used control chambers as the basis of comparison between crops and trees grown in contemporary polluted rural locations and those grown in a clean environment. There has been some concern whether the arbitrary ozone level of 0.025 ppm and below, often used in charcoal-filtration chambers to simulate the natural background concentration of ozone, is appropriate. Because of the many complex and man-made factors that influence ozone levels, it is difficult to determine natural background. To identify a range of ozone exposures that occur at 'clean' sites, we have calculated ozone exposures observed at a number of 'clean' monitoring sites located in the United States and Canada. We do not claim that these sites are totally free from human influence, but rather than the ozone concentrations observed at these 'clean' sites may be appropriate for use by vegetation researchers in control chambers as pragmatic and defensible surrogates for natural background. For comparison, we have also calculated ozone exposures observed at four 'clean' remote sites in the Northern and Southern Hemispheres and at two remote sites (Whiteface Mountain, NY and Hohenpeissenberg, FRG) that are considered to be more polluted. Exposure indices relevant for describing the relationship between ozone and vegetation effects were applied. For studying the effects of ozone on vegetation, the higher concentrations are of interest. The sigmoidally-weighted index appeared to best separate those sites that experienced frequent high concentration exposures from those that experienced few high concentrations. Although there was a consistent seasonal pattern for the National Oceanic and Atmospheric Administration (NOAA) Geophysical Monitoring for Climate Change (GMCC) sites indicating a winter/spring maximum, this was not the case for the other remote sites. Some sites in the continental United States and southern Canada

  18. Atrazine and total triazines: Exposure patterns in midwestern surface waters

    SciTech Connect

    Richards, R.P.; Baker, D.B.

    1996-10-01

    Distributions of atrazine and total triazine exposures for aquatic organisms in the midwestern United States and Canada were characterized using the most complete datasets available, with attention to the sampling pattern used in obtaining the data. Distributions were established form stantaneous concentrations and for 96-hour and 21-day running averages. Time weighting and annualization were important to avoid distorted estimates of exposure concentrations; failure to use appropriate procedures can lead to order-of-magnitude errors in estimates of benchmarks such as the 90th percentile concentration. Atrazine and total triazine concentrations are characterized by strong seasonality, with elevated concentrations for a period of 6 to 10 weeks following application in May or June. Concentrations decline during July, August, and September, and for the rest of the year are near detection limit. Concentrations in running water are strongly influenced by storm runoff, with much higher concentrations during run off than during low-flow periods between run off events. Thus aquatic organisms in running waters experience pulsed exposures interspersed with recovery periods. 90th percentile concentrations were calculated for a number of rivers, streams, lakes, and reservoirs for comparison with ecological effects data. Total triazine concentrations are only slightly higher than atrazine concentrations in those waters for which comparisons were possible.

  19. Ethylene on silver: Development of surface enhanced Raman lines with exposure

    NASA Astrophysics Data System (ADS)

    Pockrand, I.

    1983-03-01

    Adsorption of ethylene on silver films ( Ts=120 K) as a function of exposure has been studied by following the surface enhanced Raman (SER) signal of the symmetric scissors mode. Exposures as low as 10 -3 L were easily detected demonstrating the very high sensitivity of SERS for this system.

  20. Long-Duration Orbit Exposure Experiment with Sub-Surface Microorganism from a Mars Terrestrial Analog

    NASA Astrophysics Data System (ADS)

    Davila, A. F.; Lim, D.; Fairen, A. G.; Uceda, E. R.; Zavaleta, J.; McKay, C.

    2007-07-01

    Orbit Exposure Experiments (OEE) allow us to test the possibility of life transfer between planets and moons. Deep sub-surface microorganisms may be the best candidates to survive long-term exposure to space conditions. A long duration OEE is proposed to test our hypothesis.

  1. Analysis of the relation between exposure parameters and critical dimension by response surface model

    NASA Astrophysics Data System (ADS)

    Sohn, Dong-Soo; Sohn, Young-Soo; Bak, Heungin; Oh, Hye-Keun

    2001-08-01

    It is important to know the relationship between the soft bake conditions and the Dill exposure parameters in order to control the lithographic process well. It has been reported that exposure parameter A can be significantly affected by the soft bake conditions, while the exposure parameters B and C show no dependency on the soft bake conditions. The exposure parameters have been considered less important in 193 nm chemically amplified resist (CAR) simulation. Since the critical dimension variation depends on the exposure parameters, if we know the relationship between them it would be helpful in developing resist and resist process. In this paper the profiles of a 193nm CAR were simulated with the various Dill exposure parameters and the results were analyzed by response surface model. The response surface methodology (RSM) approach was used to analyze the influence of independent factors on a dependent response, and to optimize each process. A method of steepest ascent was utilized to produce first-order models, which were verified by lack of fit testing. As optimum operation points were approached, a second-order model was fitted and analyzed. The Dill exposure parameter C affects critical dimension greatly whereas A and B have much less effect. Among parameters other than exposure parameters, PEB time and PEB temperature are great factors to affect critical dimension. Even small change of them can make great critical dimension changes. Process optimization for the target response value as well as process latitude was possible through the use of the response surface.

  2. Mass, surface area and number metrics in diesel occupational exposure assessment.

    PubMed

    Ramachandran, Gurumurthy; Paulsen, Dwane; Watts, Winthrop; Kittelson, David

    2005-07-01

    While diesel aerosol exposure assessment has traditionally been based on the mass concentration metric, recent studies have suggested that particle number and surface area concentrations may be more health-relevant. In this study, we evaluated the exposures of three occupational groups-bus drivers, parking garage attendants, and bus mechanics-using the mass concentration of elemental carbon (EC) as well as surface area and number concentrations. These occupational groups are exposed to mixtures of diesel and gasoline exhaust on a regular basis in various ratios. The three groups had significantly different exposures to workshift TWA EC with the highest levels observed in the bus garage mechanics and the lowest levels in the parking ramp booth attendants. In terms of surface area, parking ramp attendants had significantly greater exposures than bus garage mechanics, who in turn had significantly greater exposures than bus drivers. In terms of number concentrations, the exposures of garage mechanics exceeded those of ramp booth attendants by a factor of 5-6. Depending on the exposure metric chosen, the three occupational groups had quite different exposure rankings. This illustrates the importance of the choice of exposure metric in epidemiological studies. If these three occupational groups were part of an epidemiological study, depending on the metric used, they may or may not be part of the same similarly exposed group (SEG). The exposure rankings (e.g., low, medium, or high) of the three groups also changes with the metric used. If the incorrect metric is used, significant misclassification errors may occur. PMID:15986054

  3. Geltape method for measurement of work related surface contamination with cobalt containing dust: correlation between surface contamination and airborne exposure.

    PubMed Central

    Poulsen, O M; Olsen, E; Christensen, J M; Vinzent, P; Petersen, O H

    1995-01-01

    OBJECTIVES--The geltape method is a new method for optical measurement of total amount of dust on surfaces. The objectives were to study the potential applicability of this method to measurements of work related cobalt exposure during painting of plates with cobalt dye. METHODS--Consecutive series of work related geltape prints were taken from surfaces inside and outside the ventilation cabins of two plate painters during two full working days. The amount of dust picked up by the geltapes was measured optically with a field monitor. Also, personal air samples were collected on filters at the different work processes. In the laboratory the contents of cobalt on the geltape prints and the filters were measured with inductive coupled plasma atomic emission spectroscopy. RESULTS--The key results were: (a) when the geltape prints were taken from surfaces inside the cabins the optically measured area of the geltapes covered with total dust (area (%)) correlated well with the chemically measured amount of cobalt present on the geltapes. Linear correlation coefficient (R2) was 0.91 for geltape prints taken on the floor and 0.94 for prints taken on the ceiling; (b) the cumulative airborne cobalt exposure, calculated from data on work related exposure by personal sampling, correlated with the area (%) of geltape prints taken from the ceiling of the cabin (R2 = 0.98); (c) the geltape method could be used to distinguish both between work processes with different levels of cobalt exposure, and between plate painters subjected to significant differences in airborne cobalt exposure. CONCLUSION--The geltape method could produce measures of the work related exposures as well as whole day exposure for cobalt. The geltape results correlated with measurements of personal airborne cobalt exposure. In this industry the profile of exposure is well-defined in time, and it seems reasonable to apply this fast and low cost method in routine exposure surveillance to obtain a more detailed

  4. Evolution of surface stress during oxygen exposure of clean Si(111), Si(100), and amorphous Si surfaces

    SciTech Connect

    Flötotto, D. Wang, Z. M.; Jeurgens, L. P. H.; Mittemeijer, E. J.

    2014-01-14

    The evolutions of the surface stress of Si(111)-7 × 7, Si(100)-2 × 1, and a-Si surfaces upon oxygen exposure at pO{sub 2} = 1 × 10{sup −4} Pa and room temperature have been investigated in a comparative manner using a specimen-curvature based technique. To this end, a generally applicable, dedicated set of experiments has been devised and performed to deduce and correct for the surface stress change owing to oxygen reaction(s) at the (poorly-defined) back face of the specimen only. On this basis, it could be demonstrated that exposure of clean Si(111)-7 × 7, Si(100)-2 × 1 and a-Si surfaces to pure oxygen gas results in compressive surface stress changes for all three surfaces due to the incorporation of oxygen into Si backbonds. The measured surface stress change decreases with decreasing atomic packing density at the clean Si surfaces, which complies well with the less-densily packed Si surface regions containing more free volume for the accommodation of adsorbed O atoms.

  5. Modification of the Surface Properties of Polyimide Films using POSS Deposition and Oxygen Plasma Exposure

    NASA Technical Reports Server (NTRS)

    Wohl, Christopher J.; Belcher, Marcus A.; Ghose, Sayata; Connell, John W.

    2008-01-01

    Topographically rich surfaces were generated by spray-coating organic solutions of a polyhedral oligomeric silsesquioxane, octakis (dimethylsilyloxy) silsesquioxane (POSS), on Kapton HN films and exposing them to radio frequency generated oxygen plasma. Changes in both surface chemistry and topography were observed. High-resolution scanning electron microscopy indicated substantial modification of the POSS-coated polyimide surface topographies as a result of oxygen plasma exposure. Water contact angles varied from 104 deg for unexposed POSS-coated surfaces to approximately 5 deg, for samples exposed for 5 h. Modulation of the dispersive and polar contributions to the surface energy was determined using van Oss Good Chaudhury theory.

  6. Lateglacial surface exposure dating in the Monadhliath Mountains, Central Highlands, Scotland

    NASA Astrophysics Data System (ADS)

    Gheorghiu, D. M.; Fabel, D.; Hansom, J. D.; Xu, S.

    2012-05-01

    We constrain the deglaciation history of the Monadhliath Mountains since the Last Glacial Maximum using glacial geomorphology and surface exposure dating. Collectively these data clarify the glacial history of the Monadhliath Mountains at the close of the Devensian cold period. 10Be exposure ages indicate deglaciation of the Last Devensian ice sheet at 15.1 ± 1.4 ka at ca 640 m OD. The exposure ages are consistent with basal radiocarbon ages from nearby Loch Etteridge, 5 km to the south-east (15.3 ± 0.2 kcal BP

  7. The efficacy of local exhaust ventilation for controlling dust exposures during concrete surface grinding.

    PubMed

    Croteau, Gerry A; Flanagan, Mary Ellen; Camp, Janice E; Seixas, Noah S

    2004-08-01

    This study assessed the effectiveness of a commercially available local exhaust ventilation (LEV) system for controlling respirable dust and crystalline silica exposures during concrete grinding activities. Surface grinding was conducted at six commercial building construction sites in Seattle, WA, by cement masons. Time-integrated filter samples and direct reading respirable dust concentrations were collected using a cyclone in line with a direct reading respirable dust monitor. Personal exposure levels were determined with and without LEV, one sample directly after the other. A total of 28 paired samples were collected in which three different dust collection shroud configurations were tested. Data obtained with a direct reading respirable dust monitor were adjusted to remove non-work task-associated dust exposures and was subsequently used to calculate the exposure reduction achieved. The application of LEV resulted in a reduction in the overall geometric mean respirable dust exposure from 4.5 to 0.14 mg/m(3), a mean exposure reduction of 92%. Despite the effective control of dust generated during surface grinding, 22 and 26% of the samples collected while LEV was being used were greater than the 8 h time-weighted average permissible exposure limit (Occupational Safety and Health Administration) and threshold limit value (American Congress of Governmental Industrial Hygienists) for respirable crystalline silica, respectively. PMID:15298850

  8. Exposure age and erosional history of an upland planation surface in the US Atlantic Piedmont

    USGS Publications Warehouse

    Stanford, S.D.; Seidl, M.A.; Ashley, G.M.

    2000-01-01

    The upland planation surface in the Piedmont of central New Jersey consists of summit flats, as much as 130 km2 in area, that truncate bedding and structure in diabase, basalt, sandstone, mudstone and gneiss. These flats define a low-relief regional surface that corresponds in elevation to residual hills in the adjacent Coastal Plain capped by a fluvial gravel of late Miocene age. A Pliocene fluvial sand is inset 50 m below the upland features. These associations suggest a late Miocene or early Pliocene age for the surface. To assess exposure age and erosional history, a 4??4 m core of clayey diabase saprolite on a 3 km2 remnant of the surface was sampled at six depths for atmospherically produced cosmogenic 10Be. The measured inventory, assuming a deposition rate of 1??3 x 106 atoms cm-2 a-1, yields a minimum exposure age of 227 000 years, or, assuming continuous surface erosion, a constant erosion rate of 10 m Ma-1. Because the sample site lies about 60 m above the aggradation surface of the Pliocene fluvial deposit, and itself supports a pre-Pliocene fluvial gravel lag, this erosion rate is too high. Rather, episodic surface erosion and runoff bypassing probably have produced an inventory deficit. Reasonable estimates of surface erosion (up to 10 m) and bypassing (up to 50 per cent of total precipitation) yield exposure ages of as much as 6??4 Ma. These results indicate that (1) the surface is probably of pre-Pleistocene age and has been modified by Pleistocene erosion, and (2) exposure ages based on 10Be inventories are highly sensitive to surface erosion and runoff bypassing. Copyright (C) 2000 John Wiley and Sons, Ltd.

  9. Full Mission Astronaut Radiation Exposure Assessments for Long Duration Lunar Surface Missions

    NASA Technical Reports Server (NTRS)

    Adamczyk, Anne; Clowdsley, Martha; Qualls, Garry; Blattnig, Steve; Lee, Kerry; Fry, Dan; Stoffle, Nicholas; Simonsen, Lisa; Slaba, Tony; Walker, Steven; Zapp, Edward

    2011-01-01

    Risk to astronauts due to ionizing radiation exposure is a primary concern for missions beyond Low Earth Orbit (LEO) and will drive mission architecture requirements, mission timelines, and operational practices. For short missions, radiation risk is dominated by the possibility of a large Solar Particle Event (SPE). Longer duration missions have both SPE and Galactic Cosmic Ray (GCR) risks. SPE exposure can contribute significantly toward cancer induction in combination with GCR. As mission duration increases, mitigation strategies must address the combined risks from SPE and GCR exposure. In this paper, full mission exposure assessments were performed for the proposed long duration lunar surface mission scenarios. In order to accomplish these assessments, previously developed radiation shielding models for a proposed lunar habitat and rover were utilized. End-to-End mission exposure assessments were performed by first calculating exposure rates for locations in the habitat, rover, and during Extra-Vehicular Activities (EVA). Subsequently, total mission exposures were evaluated for the proposed timelines. Mission exposure results, assessed in terms of effective dose, are presented for the proposed timelines and recommendations are made for improved astronaut shielding and safer operational practices.

  10. Testing the 14C ages and conservative behavior of dissolved 14C in a carbonate aquifer in Yucca Flat, Nevada (USA), using 36Cl from groundwater and packrat middens

    NASA Astrophysics Data System (ADS)

    Kwicklis, Edward; Farnham, Irene

    2014-09-01

    Corrected groundwater 14C ages from the carbonate aquifer in Yucca Flat at the former Nevada Test Site (now the Nevada National Security Site), USA, were evaluated by comparing temporal variations of groundwater 36Cl/Cl estimated with these 14C ages with published records of meteoric 36Cl/Cl variations preserved in packrat middens (piles of plant fragments, fecal matter and urine). Good agreement between these records indicates that the groundwater 14C ages are reasonable and that 14C is moving with chloride without sorbing to the carbonate rock matrix or fracture coatings, despite opposing evidence from laboratory experiments. The groundwater 14C ages are consistent with other hydrologic evidence that indicates significant basin infiltration ceased 8,000 to 10,000 years ago, and that recharge to the carbonate aquifer is from paleowater draining through overlying tuff confining units along major faults. This interpretation is supported by the relative age differences as well as hydraulic head differences between the alluvial and volcanic aquifers and the carbonate aquifer. The carbonate aquifer 14C ages suggest that groundwater velocities throughout much of Yucca Flat are about 2 m/yr, consistent with the long-held conceptual model that blocking ridges of low-permeability rock hydrologically isolate the carbonate aquifer in Yucca Flat from the outlying regional carbonate flow system.

  11. Surface modification of CaF 2 in atomic layer scale by electron beam exposure

    NASA Astrophysics Data System (ADS)

    Hwang, S. M.; Izumi, A.; Tsutsui, K.; Furukawa, S.

    1994-12-01

    Surface modification of CaF 2/Si(111) was studied for the purpose of 1 ML adsorption of group-V atoms on a fluoride surface which is applicable to heteroepitaxy of III—V compound semiconductors on CaF 2. By using Rutherford backscattering (RBS) and X-ray photoelectron spectroscopy (XPS), it was found that 1 ML of As and P were successfully adsorbed on a CaF 2 surface, and that a 1 ML self-limiting adsorption of As for the electron beam exposure was realized. Also, we propose a model for the adsorption conditions depending on the substrate temperature during surface modification.

  12. Platelet loss on exposure of citrated blood to various foreign surfaces.

    PubMed

    Perkins, H A; Rolfs, M R; Hymas, P G

    1975-01-01

    Citrated whole blood was rotated in tubes or closed loops of tubing and the percentage of platelets lost on exposure to the surface of the container was noted. Platelet loss in the presence of uncoated glass surfaces (mean loss 31%) was significantly less than in the presence of glass siliconed with two different reagents (82% and 86%). Platelets adhered to siliconed glass but not to uncoated glass. Other inert surfaces also resulted in a high degree of platelet loss: Teflon 90 per cent, silicone rubber 85 per cent, Parawax 84 per cent, polysytrene 82 per cent, polyethylene 79 per cent, polypropylene 60 per cent, and polycarbonate 58 per cent. One lot of polyvinyl chloride transfusion grade tubing resulted in only 2 per cent loss of platelets, but other lots varied between 35 and 84 per cent. Loss of platelets on exposure to the surface of plastic containers may have to be considered when evaluating new materials for preparation of blood components. PMID:804189

  13. In situ radiometric and exposure age dating of the martian surface.

    PubMed

    Farley, K A; Malespin, C; Mahaffy, P; Grotzinger, J P; Vasconcelos, P M; Milliken, R E; Malin, M; Edgett, K S; Pavlov, A A; Hurowitz, J A; Grant, J A; Miller, H B; Arvidson, R; Beegle, L; Calef, F; Conrad, P G; Dietrich, W E; Eigenbrode, J; Gellert, R; Gupta, S; Hamilton, V; Hassler, D M; Lewis, K W; McLennan, S M; Ming, D; Navarro-González, R; Schwenzer, S P; Steele, A; Stolper, E M; Sumner, D Y; Vaniman, D; Vasavada, A; Williford, K; Wimmer-Schweingruber, R F

    2014-01-24

    We determined radiogenic and cosmogenic noble gases in a mudstone on the floor of Gale Crater. A K-Ar age of 4.21 ± 0.35 billion years represents a mixture of detrital and authigenic components and confirms the expected antiquity of rocks comprising the crater rim. Cosmic-ray-produced (3)He, (21)Ne, and (36)Ar yield concordant surface exposure ages of 78 ± 30 million years. Surface exposure occurred mainly in the present geomorphic setting rather than during primary erosion and transport. Our observations are consistent with mudstone deposition shortly after the Gale impact or possibly in a later event of rapid erosion and deposition. The mudstone remained buried until recent exposure by wind-driven scarp retreat. Sedimentary rocks exposed by this mechanism may thus offer the best potential for organic biomarker preservation against destruction by cosmic radiation. PMID:24324273

  14. In Situ Radiometric and Exposure Age Dating of the Martian Surface

    NASA Technical Reports Server (NTRS)

    Farley, K. A.; Malespin, C.; Mahaffy, P.; Grotzinger, J. P.; Vasconcelos, P. M.; Milliken, R. E.; Malin, M.; Edgett, K. S.; Pavlov, A. A.; Hurowitz, J. A.; Grant, J. A.; Miller, H. B.; Arvidson, R.; Beegle, L.; Calef, F.; Conrad, P. G.; Dietrich, W. E.; Eigenbrode, J.; Gellert, R.; Gupta, S.; Hamilton, V.; Hassler, D. M.; Lewis, K. W.; McLennan, S. M.; Ming, D. M.; Navarro-Gonzalez, R.; Schwenzer, S. P.; Steele, A.; Stolper, E. M.; Sumner, D. Y.; Vaniman, D.; Vasavada, A.; Williford, K.; Wimmer-Schweingruber, R. F.

    2014-01-01

    We determined radiogenic and cosmogenic noble gases in a mudstone on the floor of Gale Crater. A K-Ar age of 4.21 +/- 0.35 billion years represents a mixture of detrital and authigenic components and confirms the expected antiquity of rocks comprising the crater rim. Cosmic-ray-produced 3He, 21Ne, and 36Ar yield concordant surface exposure ages of 78 T 30 million years. Surface exposure occurred mainly in the present geomorphic setting rather than during primary erosion and transport. Our observations are consistent with mudstone deposition shortly after the Gale impact or possibly in a later event of rapid erosion and deposition. The mudstone remained buried until recent exposure by wind-driven scarp retreat. Sedimentary rocks exposed by this mechanism may thus offer the best potential for organic biomarker preservation against destruction by cosmic radiation.

  15. POTENTIAL INHALATION EXPOSURE TO VOLATILE CHEMICALS IN WATER-BASED HARD-SURFACE CLEANERS

    EPA Science Inventory

    Potential inhalation exposure of building occupants to volatile chemicals in water-based hard-surface cleaners was evaluated by analyzing 267 material safety data sheets (MSDSs). Among the 154 chemicals reported, 44 are volatile or semi-volatile. Hazardous air pollutants (HAPs) r...

  16. Minimum activation martensitic alloys for surface disposal after exposure to neutron flux

    DOEpatents

    Lechtenberg, Thomas

    1985-01-01

    Steel alloys for long-term exposure to neutron flux have a martensitic microstructure and contain chromium, carbon, tungsten, vanadium and preferably titanium. Activation of the steel is held to within acceptable limits for eventual surface disposal by stringently controlling the impurity levels of Ni, Mo, Cu, N, Co, Nb, Al and Mn.

  17. Repeated exposure of acidic beverages on esthetic restorative materials: An in-vitro surface microhardness study

    PubMed Central

    Sunny, Steffy M.; Rai, Kavita; Hegde, Amitha M.

    2016-01-01

    Background A manifold increase in the consumption of aerated beverages has witnessed a twin increase in tooth wear and raised demand for esthetic restorative materials. This study aimed to evaluate the surface microhardness changes of esthetic restorative materials following treatment with aerated beverages in an in-vitro situation. Material and Methods The initial surface microhardness of the restorative materials GC Fuji II LC, GC Fuji IX, Nano Glass ionomer, Resin and Nano composite was recorded. These materials were studied under 3 groups that included those exposed to the acidic beverages daily, weekly once in a month and those that had no exposures at all. The final surface microhardness of the materials was recorded following experimentation and was subjected to statistical comparisons. Results The restorative materials were compared for their surface microhardness changes following respective treatments using the T-test and One-way ANOVA analysis. Inter-comparisons between the groups showed statistical significance (p<.05), when treated with both the beverages. The five restorative materials revealed surface microhardness loss; the maximum reduction noticed with the Nano glass ionomer cement tested (p<.0005). Conclusions The surface microhardness of restorative materials markedly reduced upon repeated exposures with acidic beverages; the product with phosphoric acid producing the maximum surface microhardness loss. Key words:Restorative materials, acidic beverages, surface microhardness, resin composites, glass ionomers. PMID:27398183

  18. Evaluation of entrance surface air kerma from exposure index in computed radiography

    NASA Astrophysics Data System (ADS)

    Costa, A. M.; Pelegrino, M. S.

    2014-11-01

    The aim of this study was to establish an indirect method to calculate the values of entrance surface air kerma in patients undergoing diagnostic examinations in X-ray systems with computed radiography based on the exposure index. The entrance surface air kerma values were compared with values obtained also indirectly based on measurements of X-ray tube output. The mean±standard deviation (1σ) and third quartile for entrance surface air kerma calculated from the exposure index were 2.1±1.0 mGy and 3.0 mGy, respectively. For entrance surface air kerma based on measurements of the X-ray tube output, the mean±standard deviation (1σ) and third quartile were respectively 3.1±1.9 mGy and 5.5 mGy. The observed values of entrance surface air kerma are smaller than the reference level adopted in Brazil (10 mGy). The results obtained with both methods were similar when taking into account the estimated uncertainties in the determination of air kerma values, although the reproducibility of the determinations based on the exposure index is better.

  19. Effect of exposure environment on surface decomposition of SiC-silver ion implantation diffusion couples

    DOE PAGESBeta

    Gerczak, Tyler J.; Zheng, Guiqui; Field, Kevin G.; Allen, Todd R.

    2014-10-05

    SiC is a promising material for nuclear applications and is a critical component in the construction of tristructural isotropic (TRISO) fuel. A primary issue with TRISO fuel operation is the observed release of 110m Ag from intact fuel particles. The release of Ag has prompted research efforts to directly measure the transport mechanism of Ag in bulk SiC. Recent research efforts have focused primarily on Ag ion implantation designs. The effect of the thermal exposure system on the ion implantation surface has been investigated. Results indicate the utilization of a mated sample geometry and the establishment of a static thermalmore » exposure environment is critical to maintaining an intact surface for diffusion analysis. In conclusion, the nature of the implantation surface and its potential role in Ag diffusion analysis are discussed.« less

  20. Effect of exposure environment on surface decomposition of SiC-silver ion implantation diffusion couples

    SciTech Connect

    Gerczak, Tyler J.; Zheng, Guiqui; Field, Kevin G.; Allen, Todd R.

    2014-10-05

    SiC is a promising material for nuclear applications and is a critical component in the construction of tristructural isotropic (TRISO) fuel. A primary issue with TRISO fuel operation is the observed release of 110m Ag from intact fuel particles. The release of Ag has prompted research efforts to directly measure the transport mechanism of Ag in bulk SiC. Recent research efforts have focused primarily on Ag ion implantation designs. The effect of the thermal exposure system on the ion implantation surface has been investigated. Results indicate the utilization of a mated sample geometry and the establishment of a static thermal exposure environment is critical to maintaining an intact surface for diffusion analysis. In conclusion, the nature of the implantation surface and its potential role in Ag diffusion analysis are discussed.

  1. Surface characterization of gallium nitride modified with peptides before and after exposure to ionizing radiation in solution.

    PubMed

    Berg, Nora G; Nolan, Michael W; Paskova, Tania; Ivanisevic, Albena

    2014-12-30

    An aqueous surface modification of gallium nitride was employed to attach biomolecules to the surface. The modification was a simple two-step process using a single linker molecule and mild temperatures. The presence of the peptide on the surface was confirmed with X-ray photoelectron spectroscopy. Subsequently, the samples were placed in water baths and exposed to ionizing radiation to examine the effects of the radiation on the material in an environment similar to the body. Surface analysis confirmed degradation of the surface of GaN after radiation exposure in water; however, the peptide molecules successfully remained on the surface following exposure to ionizing radiation. We hypothesize that during radiation exposure of the samples, the radiolysis of water produces peroxide and other reactive species on the sample surface. Peroxide exposure promotes the formation of a more stable layer of gallium oxyhydroxide which passivates the surface better than other oxide species. PMID:25479565

  2. Temporal variation of optimal UV exposure time over Korea: risks and benefits of surface UV radiation

    NASA Astrophysics Data System (ADS)

    Lee, Y. G.; Koo, J. H.

    2015-12-01

    Solar UV radiation in a wavelength range between 280 to 400 nm has both positive and negative influences on human body. Surface UV radiation is the main natural source of vitamin D, providing the promotion of bone and musculoskeletal health and reducing the risk of a number of cancers and other medical conditions. However, overexposure to surface UV radiation is significantly related with the majority of skin cancer, in addition other negative health effects such as sunburn, skin aging, and some forms of eye cataracts. Therefore, it is important to estimate the optimal UV exposure time, representing a balance between reducing negative health effects and maximizing sufficient vitamin D production. Previous studies calculated erythemal UV and vitamin-D UV from the measured and modelled spectral irradiances, respectively, by weighting CIE Erythema and Vitamin D3 generation functions (Kazantzidis et al., 2009; Fioletov et al., 2010). In particular, McKenzie et al. (2009) suggested the algorithm to estimate vitamin-D production UV from erythemal UV (or UV index) and determined the optimum conditions of UV exposure based on skin type Ⅱ according to the Fitzpatrick (1988). Recently, there are various demands for risks and benefits of surface UV radiation on public health over Korea, thus it is necessary to estimate optimal UV exposure time suitable to skin type of East Asians. This study examined the relationship between erythemally weighted UV (UVEry) and vitamin D weighted UV (UVVitD) over Korea during 2004-2012. The temporal variations of the ratio (UVVitD/UVEry) were also analyzed and the ratio as a function of UV index was applied in estimating the optimal UV exposure time. In summer with high surface UV radiation, short exposure time leaded to sufficient vitamin D and erythema and vice versa in winter. Thus, the balancing time in winter was enough to maximize UV benefits and minimize UV risks.

  3. Crystal chemistry of mimetite, Pb10(AsO4)6Cl1.48O0.26, and finnemanite, Pb10(AsO3)6Cl2.

    PubMed

    Baikie, Tom; Ferraris, Cristiano; Klooster, Wim T; Madhavi, S; Pramana, Stevin S; Pring, Allan; Schmidt, G; White, T J

    2008-02-01

    The crystal chemistries of synthetic mimetite, Pb(10)(As(5+)O(4))(6)(Cl(2 - x)O(x/2)), a neutral apatite, and finnemanite, Pb(10)(As(3+)O(3))(6)Cl(2), a reduced apatite, were characterized using a combination of X-ray powder diffraction, neutron diffraction, transmission electron microscopy and X-ray photoelectron spectroscopy. Both phases conform to hexagonal P6(3)/m symmetry; however, the temperature-driven transformation of clinomimetite to mimetite described earlier was not confirmed. The average mimetite structure is best described through the introduction of partially occupied oxygen sites. A better understanding of the mixed arsenic speciation in apatites can guide the formulation of waste form ceramics and improve models of long-term durability after landfill disposal. PMID:18204209

  4. Evidence from cosmic ray exposure (CRE) dating for the existence of a pre-Minoan caldera on Santorini, Greece

    NASA Astrophysics Data System (ADS)

    Athanassas, C. D.; Bourlès, D. L.; Braucher, R.; Druitt, T. H.; Nomikou, P.; Léanni, L.

    2016-05-01

    Cosmic ray exposure (CRE) dating was performed on the caldera cliffs of Santorini with the aim of detecting cliff segments predating the Minoan eruption (17th century BCE). The methodology involved the determination of in situ-produced cosmogenic 36Cl concentration in basaltic-to-rhyodacitic whole rocks cropping out in the cliffs. After the samples were processed following the chemical protocol of 36Cl preparation for silicate rocks, 36Cl concentrations were measured by accelerator mass spectrometry (AMS). Important challenges during the implementation procedure were related to large amounts of radiogenic 36Cl, complex modeling of inherited 36Cl, and dominance of the thermal and epithermal (low-energy) neutron capture production pathway. Nevertheless, quantitative assessments on the basis of the contribution of the low-energy neutron capture pathway percent to the total production rate validated the calculated CRE dates. Current CRE ages demonstrate that an ancient caldera existed on pre-Minoan Santorini, occupying at least the northern half of the modern-day caldera.

  5. The oldest ice on Earth in Beacon Valley, Antarctica: new evidence from surface exposure dating

    NASA Astrophysics Data System (ADS)

    Schäfer, Jörg M.; Baur, Heinrich; Denton, George H.; Ivy-Ochs, Susan; Marchant, Dave R.; Schlüchter, Christian; Wieler, Rainer

    2000-06-01

    Beacon Valley, Antarctica, contains unique remnants of glacier ice underneath a till layer covering the valley floor. To constrain the age and evolution of this important indicator of Antarctic paleoclimate, we analyzed two dolerite erratics from the till surface and one from within the ice for cosmogenic helium and neon. A conservative minimum exposure age of the older surface sample is 2.3 Ma, but taking into account erosion, the true exposure age of this boulder is likely to be considerably higher. The buried sample contains more than 20 times less cosmogenic noble gases than the old surface sample, although its current shielding would imply only a three times lower production rate. This indicates that the ice level has slowly been lowered by sublimation at the rate of a few m/Ma. The high exposure age of the surface sample as well as the very low sublimation rate of the relict ice both support the conclusion that the remnant ice in Beacon Valley was deposited many million years ago [Sugden et al., Nature 376 (1995) 412-414] and has never been thinner than at present. In addition, we found that cosmogenic helium and neon are released quantitatively from pyroxene at temperatures of <900°C and >1000°C, respectively.

  6. Range fires: A significant factor in exposure-age determination and geomorphic surface evolution

    SciTech Connect

    Bierman, P.; Gillespie, A. )

    1991-06-01

    Physical weathering of rock (spalling), removal of adhered rock varnish, and diffusive loss of noble gases are accelerated by heating in range fires, a dramatic and widespread geomorphic process that must be considered when samples are collected for determining surface exposure ages or for measuring in situ production rates of cosmogenic isotopes. Exposure ages and production rates will be minima if the effects of spalling and/or the effects of accelerated diffusive loss of gaseous isotopes such as He and Ne are not considered. To minimize the effect of fire-induced diffusive loss, samples for noble-gas analysis should be collected 5-10 cm below the rock surface or form outcrops that are unlikely to have been heated by fire. In addition, by determining the concentration of in situ produced cosmogenic isotopes of different half-lives, the magnitude of spalling loss (site-specific erosion rate) can be constrained for each sample.

  7. Reconstruction of glacier fluctuations in the Western Alps since the LGM using OSL surface exposure dating

    NASA Astrophysics Data System (ADS)

    Lehmann, Benjamin; King, Georgina; Valla, Pierre; Herman, Frederic

    2016-04-01

    Providing tight spatial/temporal constraints on late-Pleistocene glacier fluctuations remains an important challenge for understanding glacier response to climate change. In most mountainous settings, paleo-glacier reconstructions are limited because they lack precise temporal constraint, which would enable their use as a paleoclimate proxy. OSL-surface exposure dating has been recently proposed [Sohbati et al., 2011] and offers the potential to improve paleo-glacier reconstruction. Because the OSL signal is sensitive to light, OSL-signal bleaching within a rock sample depends on its exposure time and environmental conditions, and can therefore be used to date the exposure time of glacially-polished bedrock or erratic boulders. However, successful application of this technique first requires calibration and validation. Here, we focus on the Mer de Glace glacier (Mont Blanc massif, France) where the post-LGM glacier dynamics remain poorly constrained with numerous short glacier re-advances occuring during the mid-Pleistocene and Holocene [LeRoy et al., 2015]. First, the different parameters involved in OSL surface exposure dating were calibrated. Vertical transect of polished bedrock surfaces with known exposure ages (from 10 to 165 years) from the Montenvers train station (1913 m a.sl.) to the present-day position of the Mer de Glace (1600 m a.s.l.) was sampled. Secondly, we sampled the Trelaporte transect where exposed bedrock surfaces are of uniform lithology. Here, we will apply similar approach on a much longer timescale, from the Last Glacial Maximum (LGM, ~24 ka, Coutterand et al., 2006) to the present day. OSL data from rock slices show increasing exposure age with elevation which is consitent with glacier thinning since the Little Ice Age. Moreover, our results confirmed the possibility to first calibrate the model parameters on known-age surface and use it to constrain the exposure time for nearby bedrock surfaces. In summary, OSL-surface exposure dating

  8. Surface morphology and morphometry of rat alveolar macrophages after ozone exposure

    SciTech Connect

    Dormans, J.A.; Rombout, P.J.; van Loveren, H. )

    1990-09-01

    As the ultrastructural data on the effects of ozone on pulmonary alveolar macrophages (PAM) are lacking, transmission (TEM) and scanning (SEM) electron microscopy were performed on rat PAM present in alveolar lavages following exposure to ozone. Rats were continuously exposed for 7 d to ozone concentrations ranging from 0.25 to 1.50 mg/m3 for 7 d followed by a 5-d recovery period. Additionally, morphometry on lung sections was performed to quantitate PAM. In a second experiment rats were continuously exposed to 1.50 mg O3/m3 for 1, 3, 5, or 7 d. To study the influence of concurrent ozone exposure and lung infection, due to Listeria monocytogenes, rats were exposed for 7 d to 1.50 mg O3/m3 after a Listeria infection. The surface area of lavaged control PAM was uniformly covered with ruffles as shown by SEM and TEM. Exposure to 0.5 mg ozone/m3 for 7 d resulted in cells partly covered with microvilli and blebs in addition to normal ruffles. The number of large size PAM increased with an increase in ozone concentration. After 1 d of exposure, normal-appearing as well as many small macrophages with ruffles and scattered lymphocytes were seen. Lavage samples taken after 5 or 7 d of exposure showed an identical cell composition to that taken after 3 d of exposure. After Listeria infection alone, lavage samples consisted of mainly lymphocytes and some macrophages. Small quantitative changes, such as an increase in the number of polymorphonuclear neutrophils and large-size PAM, occurred in lavages after ozone exposure and infection with L. monocytogenes. Morphometric examination of lung sections revealed a concentration-related increase in the number of PAM, even in animals exposed to 0.25 mg ozone/m3 for 7 d. Centriacinar regions were more severely affected than other regions of lung tissue.

  9. Correlation of External Exposure and Dose Equivalent Rates with Uranium Surface Contamination

    SciTech Connect

    Ashley, J.C.; Bogard, J.S.; Brown, K.S.; England, C.A.; Hamm, R.N.; Turner, J.E.

    1999-06-01

    This report provides both calculated estimates and measured values of exposure in air and tissue dose from external penetrating radiation at a distance of 1 m from uranium contamination on surfaces at the Oak Ridge Y-12 Plant, in support of the Y-12 Site Radiological Characterization Study. Calculated values are based on the total energy from gamma rays and X rays emitted by uranium and its shordaughters at secular equilibrium. Results of a small number of measurements are provided for comparison. Dose rate values derived here are limited to those of external penetrating radiation from distributed sources with limited surface area and from point sources.

  10. Cutaneous exposure scenarios for engineered nanoparticles used in semiconductor fabrication: a preliminary investigation of workplace surface contamination

    PubMed Central

    Shepard, Michele; Brenner, Sara

    2014-01-01

    Background: Numerous studies are ongoing in the fields of nanotoxicology and exposure science; however, gaps remain in identifying and evaluating potential exposures from skin contact with engineered nanoparticles in occupational settings. Objectives: The aim of this study was to identify potential cutaneous exposure scenarios at a workplace using engineered nanoparticles (alumina, ceria, amorphous silica) and evaluate the presence of these materials on workplace surfaces. Methods: Process review, workplace observations, and preliminary surface sampling were conducted using microvacuum and wipe sample collection methods and transmission electron microscopy with elemental analysis. Results: Exposure scenarios were identified with potential for incidental contact. Nanoparticles of silica or silica and/or alumina agglomerates (or aggregates) were identified in surface samples from work areas where engineered nanoparticles were used or handled. Conclusions: Additional data are needed to evaluate occupational exposures from skin contact with engineered nanoparticles; precautionary measures should be used to minimize potential cutaneous exposures in the workplace. PMID:25000112

  11. Full Mission Astronaut Radiation Exposure Assessments for Long Duration Lunar Surface Missions

    NASA Technical Reports Server (NTRS)

    Adamczyk, Anne M.; Clowdsley, Martha S.; Qualls, Garry D.; Blattnig, Steve B.; Lee, Kerry T.; Fry, Dan J.; Stoffle, Nicholas N.; Simonsen, Lisa C.; Slaba, Tony C.; Walker, Steven A.; Zapp, Edward N.

    2010-01-01

    Risk to astronauts due to ionizing radiation exposure is a primary concern for missions beyond Low Earth Orbit (LEO) and will drive mission architecture requirements, mission timelines, and operational practices. Both galactic cosmic ray (GCR) and solar particle event (SPE) environments pose a risk to astronauts for missions beyond LEO. The GCR environment, which is made up of protons and heavier ions covering a broad energy spectrum, is ever present but varies in intensity with the solar cycle, while SPEs are sporadic events, consisting primarily of protons moving outward through the solar system from the sun. The GCR environment is more penetrating and is more difficult to shield than SPE environments, but lacks the intensity to induce acute effects. Large SPEs are rare, but they could result in a lethal dose, if adequate shielding is not provided. For short missions, radiation risk is dominated by the possibility of a large SPE. Longer missions also require planning for large SPEs; adequate shielding must be provided and operational constraints must allow astronauts to move quickly to shielded locations. The dominant risk for longer missions, however, is GCR exposure, which accumulates over time and can lead to late effects such as cancer. SPE exposure, even low level SPE exposure received in heavily shielded locations, will increase this risk. In addition to GCR and SPE environments, the lunar neutron albedo resulting mainly from the interaction of GCRs with regolith will also contribute to astronaut risk. Full mission exposure assessments were performed for proposed long duration lunar surface mission scenarios. In order to accomplish these assessments, radiation shielding models were developed for a proposed lunar habitat and rover. End-to-End mission exposure assessments were performed by first calculating exposure rates for locations in the habitat, rover, and during extra-vehicular activities (EVA). Subsequently, total mission exposures were evaluated for

  12. Studies of Itokawa's Surface Exposure by Measurements of Cosmic-ray Produced Nuclides

    NASA Technical Reports Server (NTRS)

    Caffee, M. W.; Nishiizumi, K.; Tsuchiyama, A.; Uesugi, M.; Zolensky, M. E.

    2014-01-01

    We plan to investigate the evolutionary history of surface materials from 25143 Itokawa, the Hayabusa samples. Our studies are based on the measurement of nuclides produced in asteroidal surface materials by cosmic rays. Cosmogenic radionuclides are used to determine the duration and nature of the exposure of materials to energetic particles. Our goals are to understand both the fundamental processes on the asteroidal surface and the evolutionary history of its surface materials. They are also key to understanding the history of Itokawa's surface and asteroid-meteoroid evolutionary dynamics. To achieve our key goals, in particular reconstructing the evolutionary histories of the asteroidal surface, we proposed: (1) characterizing Itokawa particles using SXCT, SXRD, and FE-SEM without modification of the sample; (2) embedding each particle in acrylic resin, then slicing a small corner with an ultra-microtome and examining it using super-STEM and SIMS for characterizing surface morphology, space weathering, and oxygen three-isotope analysis; and finally (3) measuring small amounts of cosmogenic radionuclides (104-105 atoms) in Hayabusa samples by AMS. However, we have to modify our plan due to unexpected situation.

  13. Exterior surface dust lead, interior house dust lead and childhood lead exposure in an urban environment

    SciTech Connect

    Bornschein, R.L.; Succop, P.A.; Krafft, K.M.; Clark, C.S.; Peace, B.; Hammond, P.B.

    1986-01-01

    The impact of urban lead exposure is being examined in a prospective study of several hundred children followed from birth to five years of age. A wide range of social, behavioral, biological and environmental factors are being assessed at approximately one year intervals beginning at birth. Previous analyses on this cohort have indicated a strong relationship between hand lead and hand-to-mouth activity and suggests that this is an important mechanism of inadvertent ingestion of lead in infants and young children. The present analyses was undertaken to examine the joint influence of lead in exterior surface dust and interior lead-containing painted surfaces on lead levels in house dust. In addition the joint influence of exterior and interior surface dust lead on children's hand lead content and blood lead concentration was examined. At 18 months of age 38% of the observed variation in blood lead was accounted for by hand lead and dust lead. Interior paint lead and exterior surface dust lead accounted for 52% of the observed variation in interior surface dust lead concentration. Exterior surface dust lead, obtained from exterior surface scrapings, indirectly influenced blood lead through its impact on interior house dust lead and children's hand lead content, but had no observable direct impact on blood lead. 13 references, 4 figures, 3 tables.

  14. Optically stimulated luminescence (OSL) as a chronometer for surface exposure dating

    NASA Astrophysics Data System (ADS)

    Sohbati, Reza; Murray, Andrew S.; Chapot, Melissa S.; Jain, Mayank; Pederson, Joel

    2012-09-01

    We pioneer a technique of surface-exposure dating based upon the characteristic form of an optically stimulated luminescence (OSL) bleaching profile beneath a rock surface; this evolves as a function of depth and time. As a field illustration of this new method, the maximum age of a premier example of Barrier Canyon Style (BCS) rock art in Canyonlands National Park, Utah, USA, is constrained. The natural OSL signal from quartz grains is measured from the surface to a depth of >10 mm in three different rock samples of the Jurassic Navajo Sandstone. Two samples are from talus with unknown daylight exposure histories; one of these samples was exposed at the time of sampling and one was buried and no longer light exposed. A third sample is known to have been first exposed 80 years ago and was still exposed at the time of sampling. First, the OSL-depth profile of the known-age sample is modeled to estimate material-dependent and environmental parameters. These parameters are then used to fit the model to the corresponding data for the samples of unknown exposure history. From these fits we calculate that the buried sample was light exposed for ˜700 years before burial and that the unburied sample has been exposed for ˜120 years. The shielded surface of the buried talus sample is decorated with rock art; this rock fell from the adjacent Great Gallery panel. Related research using conventional OSL dating suggests that this rockfall event occurred ˜900 years ago, and so we deduce that the rock art must have been created between ˜1600 and 900 years ago. Our results are the first credible estimates of exposure ages based on luminescence bleaching profiles. The strength of this novel OSL method is its ability to establish both ongoing and prior exposure times, at decadal to millennial timescales or perhaps longer (depending on the environmental dose rate) even for material subsequently buried. This has considerable potential in many archeological, geological and geo

  15. Giant Surface Conductivity Enhancement in a Carbon Nanotube Composite by Ultraviolet Light Exposure.

    PubMed

    Long, Christian J; Orloff, Nathan D; Twedt, Kevin A; Lam, Thomas; Vargas-Lara, Fernando; Zhao, Minhua; Natarajan, Bharath; Scott, Keana C; Marksz, Eric; Nguyen, Tinh; Douglas, Jack F; McClelland, Jabez; Garboczi, Edward; Obrzut, Jan; Liddle, J Alexander

    2016-09-01

    Carbon nanotube composites are lightweight, multifunctional materials with readily adjustable mechanical and electrical properties-relevant to the aerospace, automotive, and sporting goods industries as high-performance structural materials. Here, we combine well-established and newly developed characterization techniques to demonstrate that ultraviolet (UV) light exposure provides a controllable means to enhance the electrical conductivity of the surface of a commercial carbon nanotube-epoxy composite by over 5 orders of magnitude. Our observations, combined with theory and simulations, reveal that the increase in conductivity is due to the formation of a concentrated layer of nanotubes on the composite surface. Our model implies that contacts between nanotube-rich microdomains dominate the conductivity of this layer at low UV dose, while tube-tube transport dominates at high UV dose. Further, we use this model to predictably pattern conductive traces with a UV laser, providing a facile approach for direct integration of lightweight conductors on nanocomposite surfaces. PMID:27468781

  16. Persistence and transfer of /sup 36/Cl-DDT in the soil and biota of an old-field ecosystem: a six-year balance study

    SciTech Connect

    Forsyth, D.J.; Peterle, T.J.; Bandy, L.W.

    1983-12-01

    The fate of a 1 kg/ha application of granular chlorine-36-labeled DDT made by helicopter on 10 June 1969 to a 4-ha old-field study area near Urbana, Ohio was traced and quantified in soil and biota through November 1974. Between 1970 and 1974, residues of DDT (DDTR, includes DDT plus metabolites) declined from 22.0 to 3.8 mg/kg tissue in earthworms (Lumbricus terrestris) and from 9.3 to 2.1 mg/kg in slugs (Deroceras laeve). Levels of DDTR in foliage of grasses and forbs increased from 2-3 mg/kg in 1970 to 7.6 mg/kg in 1974, but remained relatively constant at 1.6 mg/kg in roots. Amounts of residues in samples of air collected at the surface of the soil were positively correlated with amounts in soil and with air temperature. The total quantity of DDTR in the top 12 cm of soil was estimated to be 1779 g in October 1974, or 38% of the amount applied in 1969. Earthworms, which comprised the largest component of animal biomass, contained 5% of the total DDTR in the ecosystem in 1969, compared to 3% in the plants and other biota. As residues declined in earthworms and increased in plants over time, the total DDTR bound in the biota increased until it accounted for 22% of the total DDTR in the ecosystem in 1974. Losses of DDTR from the ecosystem each year were attributed primarily to volatilization from soil, because losses in runoff and emigrating insects and small mammals were negligible. 12 references, 7 figures, 6 tables.

  17. Artificial Targets to Refine Production Rate Scaling Factors for Surface Exposure Dating

    NASA Astrophysics Data System (ADS)

    Strasky, S.; Vermeesch, P.; Baur, H.; Kober, F.; Schlüchter, C.; Wieler, R.

    2005-12-01

    To determine surface exposure ages, an obviously crucial parameter is the production rate of a nuclide of interest at the site of exposure of a given sample. As the cosmic ray intensity depends on the exact location within the troposphere, also the cosmogenic nuclide production rates vary with the geographical position. Accurate scaling of cosmogenic nuclide production rates from a calibration site to another with different geomagnetic latitude and altitude is therefore required. The international community initiated the CRONUS (Cosmic-Ray-Originated NUclide Systematics) project to improve the knowledge on production systematics of cosmogenic nuclides on earth. In our project we approach the "scaling problem'' by measuring the variability of production rates of cosmogenic noble gases (3He and 21Ne) as a function of the geographical position in artificial targets. The idea is to expose artificial targets along altitude and latitude transects during 1-2 years and subsequently measure the cosmic-ray produced 3He and 21Ne concentrations. The vacuum containers built for the experiment are inconel stainless steel tubes. The main target material is quartz, as quartz is the most commonly used mineral for exposure dating and both, cosmogenic helium and neon are produced and retained in the target container. Each target contains 1 kg of artificial quartz sand, and is degassed in vacuum prior to exposure. Blank measurements are carried out after degassing. So far, four artificial targets have been exposed in Antarctica and Tibet. Further targets will be exposed along an altitude transect between sea level and about 4500 m altitude and a latitude transect between 20-50 degrees. Blank measurements for the first exposed targets revealed 21Ne- and 3He-concentrations of about 5·105 and 5·104 atoms per container, respectively. After 1-2 years of exposure we should be able to measure the cosmogenic excess over blank with sufficient accuracy.

  18. Surface structure of α-Cr2O3(0001) after activated oxygen exposure

    SciTech Connect

    Kaspar, Tiffany C.; Chamberlin, Sara E.; Chambers, Scott A.

    2013-09-13

    The surface structure of a-Cr2O3(0001) before and after exposure to activated oxygen from an ECR plasma source was investigated by x-ray photoelectron spectroscopy (XPS) and x-ray photoelectron diffraction (XPD). Epitaxial Cr2O3(0001) thin films were deposited on Al2O3(0001) substrates by oxygen-plasma-assisted molecular beam epitaxy (OPA-MBE). When cooled or annealed in vacuum, strong evidence for a Cr-Cr-O3- termination was obtained by comparing the Cr3+ XPD azimuthal scan to single scattering simulations. However, after plasma exposure, a high binding energy feature was observed in the Cr 2p XPS spectrum that possesses an ordered structure distinct from the underlying Cr3+ of Cr2O3, which remains Cr-Cr-O3-like. Investigation of this new surface structure with simulations of various candidate structures tentatively rules out CrO2-like configurations. The high binding energy feature likely arises from a higher oxidation state of Cr. One possibility is the oxidation of the surface layer of Cr to Cr6- with a double chromyl structure (O=Cr=O).

  19. Surface structure of α-Cr2O3(0001) after activated oxygen exposure

    NASA Astrophysics Data System (ADS)

    Kaspar, Tiffany C.; Chamberlin, Sara E.; Chambers, Scott A.

    2013-12-01

    The surface structure of α-Cr2O3(0001) before and after exposure to activated oxygen from an ECR plasma source was investigated by x-ray photoelectron spectroscopy (XPS) and x-ray photoelectron diffraction (XPD). Epitaxial Cr2O3(0001) thin films were deposited on Al2O3(0001) substrates by oxygen-plasma-assisted molecular beam epitaxy (OPA-MBE). When cooled or annealed in vacuum, strong evidence for a Crsbnd Crsbnd O3sbnd termination was obtained by comparing the Cr3 + XPD azimuthal scan to single scattering simulations. However, after plasma exposure, a high binding energy feature was observed in the Cr 2p XPS spectrum that possesses an ordered structure distinct from the underlying Cr3 + of Cr2O3, which remains Cr-Cr-O3-like. Investigation of this new surface structure with simulations of various candidate structures tentatively rules out CrO2-like configurations. The high binding energy feature likely arises from a higher oxidation state of Cr. One possibility is the oxidation of the surface layer of Cr to Cr6 - δ with a double chromyl structure (Odbnd Crdbnd O).

  20. Airborne benzene exposures from cleaning metal surfaces with small volumes of petroleum solvents.

    PubMed

    Hollins, Dana M; Kerger, Brent D; Unice, Kenneth M; Knutsen, Jeffrey S; Madl, Amy K; Sahmel, Jennifer E; Paustenbach, Dennis J

    2013-06-01

    Airborne benzene concentrations were measured in a room with controlled air exchange during surface cleaning with two petroleum-based solvents (a paint thinner and an engine degreaser). The solvents were spiked with benzene to obtain target concentrations of 0.001, 0.01, and 0.1% by volume in the liquid. Personal samples on the worker and area samples up to 1.8m away were collected over 12 events (n=84 samples) designed to examine variation in exposure with solvent type, cleaning method (rag wipe or spatula scrape), surface area cleaned, air exchange rate, solvent volume applied, and distance from the cleaned surface. Average task breathing zone concentrations of benzene represented by 18-32 min time-weighted averages were 0.01 ppm, 0.05 ppm, and 0.27 ppm, when the solvents contained approximately 0.003, 0.008, and 0.07% benzene. Solvent benzene concentration, volume applied, and distance from the handling activities had the greatest effect on airborne concentrations. The studied solvent products containing 0.07% benzene (spiked) did not exceed the current OSHA permissible exposure limit of 1 ppm (averaged over 8h) or the ACGIH Threshold Limit Value of 0.5 ppm, in any of the tested short-term exposure scenarios. These data suggest that, under these solvent use scenarios, petroleum-based solvent products produced in the United States after 1978 likely did not produce airborne benzene concentrations above those measured if the concentration was less than 0.1% benzene. PMID:23088855

  1. Cigarette smoke exposure induces CFTR internalization and insolubility, leading to airway surface liquid dehydration

    PubMed Central

    Clunes, Lucy A.; Davies, Catrin M.; Coakley, Raymond D.; Aleksandrov, Andrei A.; Henderson, Ashley G.; Zeman, Kirby L.; Worthington, Erin N.; Gentzsch, Martina; Kreda, Silvia M.; Cholon, Deborah; Bennett, William D.; Riordan, John R.; Boucher, Richard C.; Tarran, Robert

    2012-01-01

    Cigarette smoke (CS) exposure induces mucus obstruction and the development of chronic bronchitis (CB). While many of these responses are determined genetically, little is known about the effects CS can exert on pulmonary epithelia at the protein level. We, therefore, tested the hypothesis that CS exerts direct effects on the CFTR protein, which could impair airway hydration, leading to the mucus stasis characteristic of both cystic fibrosis and CB. In vivo and in vitro studies demonstrated that CS rapidly decreased CFTR activity, leading to airway surface liquid (ASL) volume depletion (i.e., dehydration). Further studies revealed that CS induced internalization of CFTR. Surprisingly, CS-internalized CFTR did not colocalize with lysosomal proteins. Instead, the bulk of CFTR shifted to a detergent-resistant fraction within the cell and colocalized with the intermediate filament vimentin, suggesting that CS induced CFTR movement into an aggresome-like, perinuclear compartment. To test whether airway dehydration could be reversed, we used hypertonic saline (HS) as an osmolyte to rehydrate ASL. HS restored ASL height in CS-exposed, dehydrated airway cultures. Similarly, inhaled HS restored mucus transport and increased clearance in patients with CB. Thus, we propose that CS exposure rapidly impairs CFTR function by internalizing CFTR, leading to ASL dehydration, which promotes mucus stasis and a failure of mucus clearance, leaving smokers at risk for developing CB. Furthermore, our data suggest that strategies to rehydrate airway surfaces may provide a novel form of therapy for patients with CB.—Clunes, L. A., Davies, C. M., Coakley, R. D., Aleksandrov, A. A., Henderson, A. G., Zeman, K. L., Worthington, E. N., Gentzsch, M., Kreda, S. M., Cholon, D., Bennett, W. D., Riordan, J. R., Boucher, R. C., Tarran, R. Cigarette smoke exposure induces CFTR internalization and insolubility, leading to airway surface liquid dehydration. PMID:21990373

  2. Exposure to particle number, surface area and PM concentrations in pizzerias

    NASA Astrophysics Data System (ADS)

    Buonanno, G.; Morawska, L.; Stabile, L.; Viola, A.

    2010-10-01

    The aim of this work was to quantify exposure to particles emitted by wood-fired ovens in pizzerias. Overall, 15 microenvironments were chosen and analyzed in a 14-month experimental campaign. Particle number concentration and distribution were measured simultaneously using a Condensation Particle Counter (CPC), a Scanning Mobility Particle Sizer (SMPS), an Aerodynamic Particle Sizer (APS). The surface area and mass distributions and concentrations, as well as the estimation of lung deposition surface area and PM 1 were evaluated using the SMPS-APS system with dosimetric models, by taking into account the presence of aggregates on the basis of the Idealized Aggregate (IA) theory. The fraction of inhaled particles deposited in the respiratory system and different fractions of particulate matter were also measured by means of a Nanoparticle Surface Area Monitor (NSAM) and a photometer (DustTrak DRX), respectively. In this way, supplementary data were obtained during the monitoring of trends inside the pizzerias. We found that surface area and PM 1 particle concentrations in pizzerias can be very high, especially when compared to other critical microenvironments, such as the transport hubs. During pizza cooking under normal ventilation conditions, concentrations were found up to 74, 70 and 23 times higher than background levels for number, surface area and PM 1, respectively. A key parameter is the oven shape factor, defined as the ratio between the size of the face opening in respect to the diameter of the semicircular oven door, and particular attention must also be paid to hood efficiency.

  3. Dehydration-Driven Solvent Exposure of Hydrophobic Surfaces as a Driving Force in Peptide Folding

    SciTech Connect

    Daidone, Isabella; Ulmschneider, Martin; DiNola, Alfredo; Amadei, Andrea; Smith, Jeremy C

    2007-09-01

    Recent work has shown that the nature of hydration of pure hydrophobic surfaces changes with the length scale considered: water hydrogen-bonding networks adapt to small exposed hydrophobic species, hydrating or 'wetting' them at relatively high densities, whereas larger hydrophobic areas are 'dewetted' [Chandler D (2005), Nature 29:640-647]. Here we determine whether this effect is also present in peptides by examining the folding of a {beta}-hairpin (the 14-residue amyloidogenic prion protein H1 peptide), using microsecond time-scale molecular dynamics simulations. Two simulation models are compared, one explicitly including the water molecules, which may thus adapt locally to peptide configurations, and the other using a popular continuum approximation, the generalized Born/surface area implicit solvent model. The results obtained show that, in explicit solvent, peptide conformers with high solvent-accessible hydrophobic surface area indeed also have low hydration density around hydrophobic residues, whereas a concomitant higher hydration density around hydrophilic residues is observed. This dewetting effect stabilizes the fully folded {beta}-hairpin state found experimentally. In contrast, the implicit solvent model destabilizes the fully folded hairpin, tending to cluster hydrophobic residues regardless of the size of the exposed hydrophobic surface. Furthermore, the rate of the conformational transitions in the implicit solvent simulation is almost doubled with respect to that of the explicit solvent. The results suggest that dehydration-driven solvent exposure of hydrophobic surfaces may be a significant factor determining peptide conformational equilibria.

  4. Characterization of exposures among cemented tungsten carbide workers. Part II: Assessment of surface contamination and skin exposures to cobalt, chromium and nickel.

    PubMed

    Day, Gregory A; Virji, M Abbas; Stefaniak, Aleksandr B

    2009-05-01

    Cobalt, chromium and nickel are among the most commonly encountered contact allergens in the workplace, all used in the production of cemented tungsten carbides (CTC). Exposures to these metal-containing dusts are frequently associated with skin sensitization and/or development of occupational asthma. The objectives of this study were to assess the levels of cobalt, chromium and nickel on work surfaces and on workers' skin in three CTC production facilities. At least one worker in each of 26 work areas (among all facilities) provided hand and neck wipe samples. Wipe samples were also collected from work surfaces frequently contacted by the 41 participating workers. Results indicated that all surfaces in all work areas were contaminated with cobalt and nickel, with geometric means (GMs) ranging from 4.1 to 3057 microg/100 cm(2) and 1.1-185 microg/100 cm(2), respectively; most surfaces were contaminated with chromium (GM=0.36-67 microg/100 cm(2)). The highest GM levels of all metals were found on control panels, containers and hand tools, whereas lowest levels were on office and telecommunication equipment. The highest GM levels of cobalt and nickel on skin were observed among workers in the powder-handling facility (hands: 388 and 24 microg; necks: 55 and 6 microg, respectively). Levels of chromium on workers' skin were generally low among all facilities. Geometric standard deviations associated with surface and skin wipe measurements among work areas were highly variable. Exposure assessment indicated widespread contamination of multiple sensitizing metals in these three facilities, suggesting potential transfer of contaminants from surfaces to skin. Specific action, including improved housekeeping and training workers on appropriate use and care of personal protective equipment, should be implemented to reduce pathways of skin exposure. Epidemiologic studies of associated adverse health effects will likely require more biologically relevant exposure metrics to

  5. Effective denitrification at the groundwater surface-water interface: exposure rather than residence time

    NASA Astrophysics Data System (ADS)

    Peiffer, Stefan; Frei, Sven

    2014-05-01

    Effective processing of material in aquatic systems, e. g. removal of nitrate upon denitrification, requires sufficient reaction time. This statement sounds trivial albeit its implication for biogeochemistry seems to be not fully recognized. The time teff required for effective processing of nitrate is controlled by the underlying biogeochemical rate law. In the simplest case of a 1st order reaction, teff is often calculated as the time when 63% of the initial concentration is consumed setting teff as 1/kreaction. It may, however, be more appropriate to derive teff,90%or teff,99% from the respective rate law. Hence a minimum time t > teff is required that exposes a specific biogeochemical process to conditions favourable for this process, which is anoxia in case of denitrification. This exposure time τexp is not necessarily identical to the residence time τ of water in the particular system or flow path. Rather, the exposure time can be much shorter and may even fluctuate with time. As a consequence, Damköhler numbers (Da = τexp/teff) for denitrification < 1 may be the consequence even though the age of water may be comparatively high. We therefore argue that the key for understanding denitrification efficiency at the groundwater surface-water interface (or in groundwater systems in general) is the quantification of the exposure time. This contribution therefore aims i) to estimate exposure times required for effective denitrification based on an analysis of rate constants for denitrification, ii) to relate these time scales to typical residence time distributions found at the groundwater surface-water interface and iii) to discuss implications for denitrification efficiencies. References: Oldham, C; Farrow, DE; Peiffer, S (2013): A generalized Damköhler number for classifying material processing in hydrological systems, Hydrology and Earth System Sciences, 17, 1133-1148 Frei, S; Knorr, KH; Peiffer, S; Fleckenstein, J (2012): Surface micro-topography causes

  6. Space Weathering Effects in Lunar Soils: The Roles of Surface Exposure Time and Bulk Chemical Composition

    NASA Technical Reports Server (NTRS)

    Zhang, Shouliang; Keller, Lindsay P.

    2011-01-01

    Space weathering effects on lunar soil grains result from both radiation-damaged and deposited layers on grain surfaces. Typically, solar wind irradiation forms an amorphous layer on regolith silicate grains, and induces the formation of surficial metallic Fe in Fe-bearing minerals [1,2]. Impacts into the lunar regolith generate high temperature melts and vapor. The vapor component is largely deposited on the surfaces of lunar soil grains [3] as is a fraction of the melt [4, this work]. Both the vapor-deposits and the deposited melt typically contain nanophase Fe metal particles (npFe0) as abundant inclusions. The development of these rims and the abundance of the npFe0 in lunar regolith, and thus the optical properties, vary with the soil mineralogy and the length of time the soil grains have been exposed to space weathering effects [5]. In this study, we used the density of solar flare particle tracks in soil grains to estimate exposure times for individual grains and then perform nanometer-scale characterization of the rims using transmission electron microscopy (TEM). The work involved study of lunar soil samples with different mineralogy (mare vs. highland) and different exposure times (mature vs. immature).

  7. Cigarette smoke exposure induces CFTR internalization and insolubility, leading to airway surface liquid dehydration.

    PubMed

    Clunes, Lucy A; Davies, Catrin M; Coakley, Raymond D; Aleksandrov, Andrei A; Henderson, Ashley G; Zeman, Kirby L; Worthington, Erin N; Gentzsch, Martina; Kreda, Silvia M; Cholon, Deborah; Bennett, William D; Riordan, John R; Boucher, Richard C; Tarran, Robert

    2012-02-01

    Cigarette smoke (CS) exposure induces mucus obstruction and the development of chronic bronchitis (CB). While many of these responses are determined genetically, little is known about the effects CS can exert on pulmonary epithelia at the protein level. We, therefore, tested the hypothesis that CS exerts direct effects on the CFTR protein, which could impair airway hydration, leading to the mucus stasis characteristic of both cystic fibrosis and CB. In vivo and in vitro studies demonstrated that CS rapidly decreased CFTR activity, leading to airway surface liquid (ASL) volume depletion (i.e., dehydration). Further studies revealed that CS induced internalization of CFTR. Surprisingly, CS-internalized CFTR did not colocalize with lysosomal proteins. Instead, the bulk of CFTR shifted to a detergent-resistant fraction within the cell and colocalized with the intermediate filament vimentin, suggesting that CS induced CFTR movement into an aggresome-like, perinuclear compartment. To test whether airway dehydration could be reversed, we used hypertonic saline (HS) as an osmolyte to rehydrate ASL. HS restored ASL height in CS-exposed, dehydrated airway cultures. Similarly, inhaled HS restored mucus transport and increased clearance in patients with CB. Thus, we propose that CS exposure rapidly impairs CFTR function by internalizing CFTR, leading to ASL dehydration, which promotes mucus stasis and a failure of mucus clearance, leaving smokers at risk for developing CB. Furthermore, our data suggest that strategies to rehydrate airway surfaces may provide a novel form of therapy for patients with CB. PMID:21990373

  8. Pesticide residues on the external surfaces of field crop sprayers: occupational exposure.

    PubMed

    Ramwell, Carmel T; Johnson, Paul D; Boxall, Alistair B A; Rimmer, Duncan A

    2005-06-01

    There is a general perception, amongst farmers and researchers, that post-application residues on the external surfaces of sprayers are negligible compared with residues remaining on the internal surfaces, although there have been few attempts to verify this assumption. The aim of this study was to investigate, using cotton glove sampling, operator exposure resulting from three typical operations: entering and working in the cab, general handling of the sprayer and maintenance practices. Samples were analysed for azoxystrobin, carbendazim, chlorothalonil, cyanazine, cypermethrin, epoxiconazole, flusilazole, isoproturon, kresoxim-methyl, metazachlor, pendimethalin, pirimicarb and tebuconazole. Isoproturon, pendimethalin, chlorothalonil and carbendazim were detected >1 mg per glove pair on the cotton gloves, but on the whole there was variability in residue levels between and within compounds. Comparison of results with occupational exposure limits indicated that residues were such that they may not necessarily be considered insignificant. It may therefore be prudent to develop more efficient methods for the external decontamination of sprayers and/or raise awareness of the findings. PMID:15650013

  9. Cobalt and chromium exposure affects osteoblast function and impairs the mineralization of prosthesis surfaces in vitro.

    PubMed

    Shah, Karan M; Wilkinson, Jeremy Mark; Gartland, Alison

    2015-11-01

    Cobalt (Co) and chromium (Cr) ions and nanoparticles equivalent to those released through tribo-corrosion of prosthetic metal-on-metal (MOM) bearings and taper junctions are detrimental to osteoblast activity and function in vitro when examined as individual species. Here we examined the effects of Co(2+):Cr(3+) and Co(2+):Cr(6+) combinations on osteoblast-like SaOS-2 cellular activity, alkaline phosphatase (ALP) activity and mineralization to better reflect clinical exposure conditions in vivo. We also assessed the effect of Co(2+):Cr(3+) combinations and Co:Cr nanoparticles on SaOS-2 cell osteogenic responses on grit-blasted, plasma-sprayed titanium-coated, and hydroxyapatite-coated prosthesis surfaces. Cellular activity and ALP activity were reduced to a greater extent with combination treatments compared to individual ions. Co(2+) and Cr(3+) interacted additively and synergistically to reduce cellular activity and ALP activity, respectively, while the Co(2+) with Cr(6+) combination was dominated by the effect of Cr(6+) alone. Mineralization by osteoblasts was greater on hydroxyapatite-coated surfaces compared to grit-blasted and plasma-sprayed titanium-coated surfaces. Treatments with Co(2+):Cr(3+) ions and Co:Cr nanoparticles reduced the percentage mineralization on all surfaces, with hydroxyapatite-coated surfaces having the least reduction. In conclusion, our data suggests that previous studies investigating individual metal ions underestimate their potential clinical effects on osteoblast activity. Furthermore, the data suggests that hydroxyapatite-coated surfaces may modulate osteoblast responses to metal debris. PMID:25929464

  10. Solar Ion Processing of Itokawa Grains: Constraints on Surface Exposure Times

    NASA Technical Reports Server (NTRS)

    Christoffersen, R.; Keller, L. P.

    2015-01-01

    Analytical TEM observations obtained to date reveal that a significant sub-population of grains returned from the surface of asteroid Itokawa have had their outer 30-100 nm processed by space weathering effects. Although the effects include some surface deposition of condensed impact vapor and isolated impact melt splashes, much of the width of the space weathered outer margins or "rims" on grains is derived from solar wind processing of the original host grain. Similar to what has long been reported for some lunar grains, the ion-processed rims on Itokawa grains exhibit varing degrees and depths of penetration of atomic-displacement ion damage, resulting in complete amorphization for some rims (particularly in plagioclase), or formation of highly defective but still crystalline structures in others (particularly in pyroxene and olivine). Possibly different from lunar grains, however, is the presence of isolated internal cavities or voids in Itokawa grain rims, which may be implantation "bubbles" due to accumulating implanted solar wind H and/or He. For a given mineral exposed at a particular set of long term solar wind conditions, the level of ion damage in a given grain rim, the depth of damage penetration represented by the rim width, and the formation or lack of formation of implantation bubbles can all be linked to the time spent by the grain in an uncovered state on the topmost, space-exposed, regolith surface. For the lunar case, we have previously shown that with reasonable assumptions about solar wind characteristics over time, a model can be developed to estimate this exposure time based on the width of amorphous rims on lunar grains. Here we report on an expansion of the model to cover exposure time information contained in the array of solar ion-induced features in Itokawa grains.

  11. Infrared spectroscopy of sub-surface defects induced by remote hydrogen plasma exposure of silicon (100)

    SciTech Connect

    Lamb, H.H.; Bedge, S.G.; Wan, Z.

    1998-12-31

    Infrared multiple internal reflection (MIR) spectroscopy was used to investigate the local chemical bonding in sub-surface defects induced by remote hydrogen plasma exposure (RHPE) of Si(100) wafers. Exposure of very lightly doped n-type Si ([P] = 5 {times} 10{sup 13} cm{sup {minus}3}) to a remote hydrogen plasma for 2 min at 200 C results in the formation of Si monohydride species. An intense narrow band at 2078 cm{sup {minus}1} (FWHM = 7 cm{sup {minus}1}) and a small shoulder at 2065 cm{sup {minus}1} are observed. The data are consistent with monohydride termination of Si{l_brace}111{r_brace} platelet defects with a weak interaction between H atoms on opposing internal surfaces. In contrast, platelet nucleation at 200 C followed by growth at 300 C selectively generates Si dihydride species, as evidenced by a single broad infrared band at 2109 cm{sup {minus}1}. The P concentration was found to have a marked influence on the areal density and chemical bonding of sub-surface hydrogen. The MIR spectrum of lightly doped Si ([P] = 2 {times} 10{sup 14} cm{sup {minus}3}) after RHPE at 200 C contains broad peaks at 2078 and 2130 cm{sup {minus}1} consistent with Si monohydride and trihydride species. The authors infer that hydrogen saturates broken bonds along Si{l_brace}111{r_brace} Type 1 glide planes (one bond per Si atom) and along Si{l_brace}111{r_brace} Type II glide planes (three bonds per Si atom). The Si-H peak area indicates a H areal density {approximately}2 times higher than in very lightly doped Si.

  12. Impacts of hematite nanoparticle exposure on biomechanical, adhesive, and surface electrical properties of Escherichia coli cells.

    PubMed

    Zhang, Wen; Hughes, Joseph; Chen, Yongsheng

    2012-06-01

    Despite a wealth of studies examining the toxicity of engineered nanomaterials, current knowledge on their cytotoxic mechanisms (particularly from a physical perspective) remains limited. In this work, we imaged and quantitatively characterized the biomechanical (hardness and elasticity), adhesive, and surface electrical properties of Escherichia coli cells with and without exposure to hematite nanoparticles (NPs) in an effort to advance our understanding of the cytotoxic impacts of nanomaterials. Both scanning electron microscopy (SEM) and atomic force microscopy (AFM) showed that E. coli cells had noticeable deformation with hematite treatment for 45 min with a statistical significance. The hematite-treated cells became significantly harder or stiffer than untreated ones, as evidenced by indentation and spring constant measurements. The average indentation of the hematite-treated E. coli cells was 120 nm, which is significantly lower (P < 0.01) than that of the untreated cells (approximately 400 nm). The spring constant of hematite-treated E. coli cells (0.28 ± 0.11 nN/nm) was about 20 times higher than that of untreated ones (0.01 ± 0.01 nN/nm). The zeta potential of E. coli cells, measured by dynamic light scattering (DLS), was shown to shift from -4 ± 2 mV to -27 ± 8 mV with progressive surface adsorption of hematite NPs, a finding which is consistent with the local surface potential measured by Kelvin probe force microscopy (KPFM). Overall, the reported findings quantitatively revealed the adverse impacts of nanomaterial exposure on physical properties of bacterial cells and should provide insight into the toxicity mechanisms of nanomaterials. PMID:22467500

  13. Impacts of Hematite Nanoparticle Exposure on Biomechanical, Adhesive, and Surface Electrical Properties of Escherichia coli Cells

    PubMed Central

    Zhang, Wen; Hughes, Joseph

    2012-01-01

    Despite a wealth of studies examining the toxicity of engineered nanomaterials, current knowledge on their cytotoxic mechanisms (particularly from a physical perspective) remains limited. In this work, we imaged and quantitatively characterized the biomechanical (hardness and elasticity), adhesive, and surface electrical properties of Escherichia coli cells with and without exposure to hematite nanoparticles (NPs) in an effort to advance our understanding of the cytotoxic impacts of nanomaterials. Both scanning electron microscopy (SEM) and atomic force microscopy (AFM) showed that E. coli cells had noticeable deformation with hematite treatment for 45 min with a statistical significance. The hematite-treated cells became significantly harder or stiffer than untreated ones, as evidenced by indentation and spring constant measurements. The average indentation of the hematite-treated E. coli cells was 120 nm, which is significantly lower (P < 0.01) than that of the untreated cells (approximately 400 nm). The spring constant of hematite-treated E. coli cells (0.28 ± 0.11 nN/nm) was about 20 times higher than that of untreated ones (0.01 ± 0.01 nN/nm). The zeta potential of E. coli cells, measured by dynamic light scattering (DLS), was shown to shift from −4 ± 2 mV to −27 ± 8 mV with progressive surface adsorption of hematite NPs, a finding which is consistent with the local surface potential measured by Kelvin probe force microscopy (KPFM). Overall, the reported findings quantitatively revealed the adverse impacts of nanomaterial exposure on physical properties of bacterial cells and should provide insight into the toxicity mechanisms of nanomaterials. PMID:22467500

  14. Effects of acid aerosol exposure on the surface properties of airway mucus

    SciTech Connect

    Lee, M.M.; Schuerch, S.; Roth, S.H.

    1995-12-31

    It was hypothesized that the mucous layer lining the tracheas of rats and guinea pigs contains surfactant material capable of lowering the air/mucus surface tension, {gamma}, and that exposure to an irritant aerosol would raise the {gamma}. The {gamma} of the surface film was measured directly by a spreading droplet technique and indirectly by displacement of polymethyl methacrylate particles into the aqueous layer. The morphology of the mucous film was examined by electron microscopy after nonaqueous fixation. {gamma} was 33.3 {plus_minus} 0.70 (SE) mN/m and 32.3 {plus_minus} 0.68 (SE) mN/m for the normal rat and guinea pig trachea, respectively. Exposure for 4 h to aerosols of sulfuric acid (94.1 {plus_minus} 18.68 (SD) and 43.3 {plus_minus} 4.57 (SD) mg/m{sup 3}) caused a several-fold increase in thickness of the mucous layer with exudation of protein-like material. The osmiophilic surfactant film at the air/mucus interface became irregularly thickened and multilayered. Despite these morphological changes {gamma} remained low, 33.2 {plus_minus} 0.43 (SE) mN/m and 32.6 {plus_minus} 0.60 (SE) mN/m for rats and guinea pigs, respectively, and displacement of particles into the subphase was not compromised. The results indicate that rodent tracheas are able to maintain a low surface tension in the presence of injury. 24 refs., 9 figs.

  15. Suppression of blister formation and deuterium retention on tungsten surface due to mechanical polishing and helium pre-exposure

    NASA Astrophysics Data System (ADS)

    Nishijima, D.; Iwakiri, H.; Amano, K.; Ye, M. Y.; Ohno, N.; Tokunaga, K.; Yoshida, N.; Takamura, S.

    2005-07-01

    Low-energy deuterium (D) plasma exposure on tungsten (W), which is an important material for ITER, results in blister formation on the surface. Blister formation increases both micron-sized dust production and D retention. Blister formation depends greatly on surface pre-treatment. Deuterium plasma exposure on mirror-finished powder metallurgy W at 500 K for 3 h forms a blister with a diameter of a few hundred micrometres on the surface. Blister formations on the mechanically-polished and helium-pre-exposed surfaces are drastically suppressed. Deuterium retention is also reduced on both the mechanically-polished surface and the helium-pre-exposed surface compared with that on the mirror-finished surface. The suppressive effect of blister formation on the mechanically-polished surface is maintained for 50 h. The size of blisters and D retention on mirror-finished surface exposed for 50 h increases by some degrees (<~500 µm, 7 × 1020 m-2) compared with that on mirror-finished surface exposed for 3 h (<~200 µm, 5 × 1020 m-2), but is not proportional to the exposure time. The saturation level of D retention even on blister-rich surfaces seems to be lower than an order of 1021 D2 m-2.

  16. COMMON ISSUES IN HUMAN AND ECOSYSTEM EXPOSURE ASSESSMENT: THE SIGNIFICANCE OF PARTITIONING, KINETICS, AND UPTAKE AT BIOLOGICAL EXCHANGE SURFACES

    EPA Science Inventory

    Exogenous chemicals enter organisms through critical surfaces in the lung, gills, gut, and skin. Transfer across these boundaries is the first step in characterizing the ratio of tissue dose to external exposure. Surface processes and fugacity are important elements of both human...

  17. Advances in cosmogenic surface exposure dating: Using combined in situ 14C-10Be analysis for deglaciation scenarios

    NASA Astrophysics Data System (ADS)

    Hippe, Kristina; Ivy-Ochs, Susan; Kober, Florian; Christl, Marcus; Fogwill, Christopher; Turney, Chris; Rood, Dylan; Lupker, Maarten; Schlücher, Christian; Wieler, Rainer

    2016-04-01

    Cosmogenic nuclides are routinely used to investigate deglaciation histories by exposure dating of rock surfaces after glacier retreat. For bedrock surfaces that have been efficiently eroded by glacier ice, the most commonly applied cosmogenic 10Be isotope has proven to give reliable estimates of the integrated time of surface exposure since major ice decay. Due to its long half-life (~1.4 Ma), however, 10Be does not record short episodes of intermittent surface cover, e.g. during phases of glacier readvance, which might have interrupted the general deglaciation trend. To detect such cases of "complex exposure", 10Be-based dating can be combined with the analysis of the short-lived (5730 a) in situ cosmogenic 14C nuclide. We present two examples, in which combined in situ 14C-10Be analysis has been successfully applied to reconstruct in detail post-LGM surface exposures histories - in the Swiss Alps [1] and in Antarctica [2]. In a study on the Gotthard Pass, Central Swiss Alps, in situ 14C-10Be exposure dating was combined with extensive mapping of glacial erosional features. Data from both cosmogenic nuclides are in overall good agreement with each other confirming continuous exposure of the Gotthard Pass area throughout the Holocene. Some slightly younger in situ 14C ages compared to the corresponding 10Be ages are interpreted to result from partial surface shielding due to snow cover. Constraining the average Holocene snow depth from the in situ 14C data allowed to apply an appropriate snow shielding correction for the 10Be exposure ages. Integration of the snow-corrected exposure ages with field observations provided a detailed chronology of a progressive downwasting of ice from the maximum LGM ice volume with a gradual reorganization of the ice flow pattern and a southward migration of the ice divide. In a study on the evolution and reorganization of ice streams entering the Weddell Sea, Antarctica, during the last deglaciation, ice sheet modelling was

  18. Characterizing arid region alluvial fan surface roughness with airborne laser swath mapping digital topographic data

    NASA Astrophysics Data System (ADS)

    Frankel, Kurt L.; Dolan, James F.

    2007-06-01

    Range-front alluvial fan deposition in arid environments is episodic and results in multiple fan surfaces and ages. These distinct landforms are often defined by descriptions of their surface morphology, desert varnish accumulation, clast rubification, desert pavement formation, soil development, and stratigraphy. Although quantifying surface roughness differences between alluvial fan units has proven to be difficult in the past, high-resolution airborne laser swath mapping (ALSM) digital topographic data are now providing researchers with an opportunity to study topography in unprecedented detail. Here we use ALSM data to calculate surface roughness on two alluvial fans in northern Death Valley, California. We define surface roughness as the standard deviation of slope in a 5-m by 5-m moving window. Comparison of surface roughness values between mapped fan surfaces shows that each unit is statistically unique at the 99% confidence level. Furthermore, there is an obvious smoothing trend from the presently active channel to a deposit with cosmogenic 10Be and 36Cl surface exposure ages of ˜70 ka. Beyond 70 ka, alluvial landforms become progressively rougher with age. These data suggest that alluvial fans in arid regions smooth out with time until a threshold is crossed where roughness increases at greater wavelength with age as a result of surface runoff and headward tributary incision into the oldest surfaces.

  19. The Treponema denticola Major Sheath Protein Is Predominantly Periplasmic and Has Only Limited Surface Exposure

    PubMed Central

    Caimano, Melissa J.; Bourell, Kenneth W.; Bannister, Teresa D.; Cox, David L.; Radolf, Justin D.

    1999-01-01

    The recent discovery that the Treponema pallidum genome encodes 12 orthologs of the Treponema denticola major sheath protein (Msp) prompted us to reexamine the cellular location and topology of the T. denticola polypeptide. Experiments initially were conducted to ascertain whether Msp forms an array on or within the T. denticola outer membrane. Transmission electron microscopy (EM) of negatively stained and ultrathin-sectioned organisms failed to identify a typical surface layer, whereas freeze-fracture EM revealed that the T. denticola outer membrane contains heterogeneous transmembrane proteins but no array. In contrast, a lattice-like structure was observed in vesicles released from mildly sonicated treponemes; combined EM and biochemical analyses demonstrated that this structure was the peptidoglycan sacculus. Immunoelectron microscopy (IEM) subsequently was performed to localize Msp in T. denticola. Examination of negatively stained whole mounts identified substantial amounts of Msp in sonicated organisms. IEM of ultrathin-sectioned, intact treponemes also demonstrated that the preponderance of antigen was unassociated with the outer membrane. Lastly, immunofluorescence analysis of treponemes embedded in agarose gel microdroplets revealed that only minor portions of Msp are surface exposed. Taken as a whole, our findings challenge the widely held belief that Msp forms an array within the T. denticola outer membrane and demonstrate, instead, that it is predominantly periplasmic with only limited surface exposure. These findings also have implications for our evolving understanding of the contribution(s) of Msp/Tpr orthologs to treponemal physiology and disease pathogenesis. PMID:10417176

  20. Long-Term Microturbine Exposure of an Advanced Alloy for Microturbine Primary Surface Recuperators

    SciTech Connect

    Matthews, Wendy; More, Karren Leslie; Walker, Larry R

    2009-01-01

    Haynes alloy HR-120 (Haynes and HR-120 are trademarks of Haynes International, Inc.) forms a protective oxide scale when exposed to the harsh operating environment of a microturbine primary surface recuperator. Primary surface recuperators manufactured from HR-120 are currently in use on the Capstone C65 MicroTurbine (MicroTurbine is a registered trademark of Capstone Turbine Corporation). Long-term microturbine tests of this alloy are currently being conducted at an elevated turbine exit temperature ({approx}100 F higher than that in a normal operation) at Capstone Turbine Corporation. Alloy samples that have been tested under steady-state microturbine operating conditions are removed after predetermined exposure intervals for characterization by Capstone Turbine Corporation in collaboration with Oak Ridge National Laboratory. Such evaluations include the characterization of surface oxide scales and the associated alloy compositional changes following a steady-state operation ranging from 1800 h to 14,500 h. Results from the microstructural and compositional analyses of these long-term steady-state engine-tested HR-120 samples are used to illustrate the progression of alloy oxidation in the microturbine operating environment.

  1. A note of caution on the use of boulders for exposure dating of depositional surfaces

    NASA Astrophysics Data System (ADS)

    Schmidt, S.; Hetzel, R.; Kuhlmann, J.; Ramos, V. A.

    2010-12-01

    Exposure dating of boulders has been widely applied to determine the age of depositional surfaces under the assumption that the pre-depositional nuclide component in most boulders is negligible (e.g. Bierman et al., 1995; van der Woerd et al., 2006). Here we present a case study on fluvial terraces at the active mountain front of the eastern Andes, where this assumption is clearly invalid, because sandstone boulders (n = 13) at two sites contain a highly variable inherited 10Be component and have apparent 10Be ages that exceed the age of the respective surface by up to 93 ka. Likewise, boulders from active stream channels (n = 5) contain a substantial inherited 10Be component, equivalent to 5-48 ka of exposure. The age of the fluvial terraces is well determined by 10Be depth profiles on sand samples, which allow to correct for the pre-depositional nuclide component. At site 1, three terraces have 10Be ages of 3.20 ± 0.42 ka (T2), 11.11 ± 0.87 ka (T3), and 16.0 ± 1.1 ka (T4). The age of T3 is furthermore confirmed by a calibrated 14C age of 12.61 ± 0.20 ka BP. At site 2, terrace T3 has an age of 13.5 ± 2.1 ka (derived on a 10Be depth profile), while boulders indicate apparent ages from 14 to 31 ka. The average inherited 10Be concentration of sand grains - determined from depth profiles and stream sediments - is small and equivalent to 1-3 ka of exposure, whereas the mean inheritance of the boulders is an order of magnitude higher. This causes great caution by determining erosion rates. The huge contrast is related to the different provenance and transport history of sand and boulders. While the sand is derived from rapidly eroding Miocene sediments exposed near the mountain front, the boulders originate from Triassic sandstones in the internal part of the fold-and-thrust belt. On their way to the mountain front the boulders were temporarily stored and irradiated in alluvial fans that are currently reworked. Sediment deposition in intramontane basins and

  2. Monitoring of troponin release from cardiomyocytes during exposure to toxic substances using surface plasmon resonance biosensing.

    PubMed

    Andersson, Henrik; Kågedal, Bertil; Mandenius, Carl-Fredrik

    2010-10-01

    Troponin T (TnT) is a useful biomarker for studying drug-induced toxicity effects on cardiac cells. We describe how a surface plasmon resonance (SPR) biosensor was applied to monitor the release of TnT from active HL-1 cardiomyocytes in vitro when exposed to cardiotoxic substances. Two monoclonal human TnT antibodies were compared in the SPR immunosensor to analyse the TnT release. The detection limit of TnT was determined to be 30 ng/ml in a direct assay set-up and to be 10 ng/ml in a sandwich assay format. Exposure of the cardiomyocytes to doxorubicin, troglitazone, quinidine and cobalt chloride for periods of 6 and 24 h gave significant SPR responses, whereas substances with low toxicity showed insignificant effects (ascorbic acid, methotrexate). The SPR results were verified with a validated immunochemiluminescence method which showed a correlation of r (2) = 0.790. PMID:20694813

  3. Calculated values of atomic oxygen fluences and solar exposure on selected surfaces of LDEF

    NASA Technical Reports Server (NTRS)

    Gillis, J. R.; Pippin, H. G.; Bourassa, R. J.; Gruenbaum, P. E.

    1995-01-01

    Atomic oxygen (AO) fluences and solar exposure have been modeled for selected hardware from the Long Duration Exposure Facility (LDEF). The atomic oxygen exposure was modeled using the microenvironment modeling code SHADOWV2. The solar exposure was modeled using the microenvironment modeling code SOLSHAD version 1.0.

  4. Lichenometry and Cosmogenic Surface Exposure Dating of Possible Fossil Talus Deposits, Devil's Lake State Park, Wisconsin

    NASA Astrophysics Data System (ADS)

    Knochenhauer, K. J.; Weber, J. C.

    2011-12-01

    Lichenometry and cosmogenic surface exposure dating have been highly successful in deciphering landform evolution in tectonically active regions, but have not been widely applied in mid-continent settings. We propose to test the idea that many of the talus deposits in Devil's Lake State Park (DLSP) are ancient, fossil, periglacial deposits that have been frozen in space and time not moving since ~18,000 years ago. Our results may provide valuable information that could be applied to other settings and may also offer information on the effects of 2nd order climatic events such as the Little Ice Age of the 16th-19th centuries, and also help determine the relation between the last glacial maximum about 18ky ago and its related timing to major mass sediment movements. Our preliminary data was collected methodologically offering tight, unimodal peaks of lichen diameters/ages for Aspicilia cinerea and Dimelaena oreina most consistent with the idea that the deposits have not moved since the last ice age. A growth curve for Dimelaena oreina was established through the use of a neighboring cemetery giving a local growth rate of 67.13mm/100yr with R=68. Size-distribution results for DLSP peaked at only 65.2mm. This suggests that current talus block lichen cover is not a record of the first generation. We will pair our lichenometric results with the future use of 10Be cosmogenic surface exposure dating to determine the ages of the 3 major talus deposits themselves (as opposed to lichen initialization ages) which should allow us to test our initial hypothesis, enhance our lichenometry data set, and begin to develop a more robust sampling strategy for further work. Deciphering the landform evolution of this area would offer insight to past landslides and mass debris flows.

  5. Exposure Histories of Lunar Meteorites Northwest Africa 032 and DHOFAR 081

    SciTech Connect

    Nishiizumi, K.; Caffee, M.

    2001-04-01

    Recent additions to the list of lunar meteorites include Northwest Africa (NWA) 032 and Dhofar 081. NWA 032 is an unbrecciated basalt, found in Morocco; Dhofar 081 is a fragmented feldspathic breccia, found in Oman. Our goal is the determination of the cosmic ray exposure history of these objects. Most lunar meteorites have complex cosmic ray exposure histories, having been exposed both at some depth on the lunar surface (2{pi} irradiation) before their ejection and as small bodies in space (4{pi} irradiation) during transport from the Moon to the Earth. These exposures were then followed by residence on the Earth's surface, the terrestrial residence time. Unraveling the complex history of these objects requires the measurement of at least four cosmogenic nuclides. The specific goals of these measurements are to constrain the depth of the sample at the time of ejection from the Moon, the transit time from the time of ejection to the time of capture by the Earth, and the residence time on the Earth's surface. These exposure durations in conjunction with the sample depth on the Moon can then be used to model impact and ejection mechanisms. To investigate the complex exposure histories of lunar meteorites, we measured cosmogenic nuclides, {sup 36}Cl (half-life = 3.01 x 10{sup 5} yr), {sup 26}Al (7.05 x 10{sup 5} yr), and {sup 10}Be (1.5 x 10{sup 6} yr) in NWA 032 and Dhofar 081. The measurements of {sup 41}Ca (1.04 x 10{sup 5} yr) are in progress.

  6. 10Be surface exposure dating of rock glaciers in Larstigtal, Tyrol, Austria

    NASA Astrophysics Data System (ADS)

    Ivy-Ochs, S.; Kerschner, H.; Maisch, M.; Christl, M.; Kubik, P. W.; Schluchter, C.

    2009-04-01

    In the context of Lateglacial and Holocene climate change research, rock glaciers (creeping mountain permafrost) also play an important role. They are phenomena of discontinuous alpine permafrost and as such good indicators for the mean annual air temperature for the period they are active. We have 10Be surface exposure dated boulders from two relict rock glaciers in Larstigtal, Austria. This is the type area for a postulated mid-Holocene cold period called the Larstig oscillation. The period of activity was suggested to be of similar age as the mid-Holocene Frosnitz advance of glaciers in the Venediger Mountains farther to the east (Patzelt and Bortenschlager, 1973). For rock glaciers of this size to be active at 2200 m a.s.l. in Larstig valley would have required a significant drop in temperatures, thus a marked mid-Holocene cold pulse, for at least several centuries at around 7.0 ka. In contrast, our exposure dates show that the rock glaciers stabilized during the early Preboreal (Ivy-Ochs et al., submitted). We see no distinct pattern with respect to exposure age and boulder location on the rock glaciers. This implies that for our site the blocks did not acquire inherited 10Be during exposure in the free rock face, in the talus at the base of the slope, or during transport on the rock glaciers. Our data point to final stabilization of the Larstigtal rock glaciers in the earliest Holocene and not in the middle Holocene. Combined with data from other archives (Nicolussi et al., 2005), there appears to have been no time window in the middle Holocene long enough for rock glaciers of the size and at the elevation of the Larstig site to have formed. Ivy-Ochs, S., Kerschner, H., Maisch, M., Christl, M., Kubik, P.W., Schlüchter, C., Latest Pleistocene and Holocene glacier variations in the European Alps. Quaternary Science Reviews (submitted). Nicolussi, K., Kaufmann, M., Patzelt, G., van der Plicht, J., Thurner, A., 2005. Holocene tree-line variability in the Kauner

  7. Influence of tropospheric ozone control on exposure to ultraviolet radiation at the surface.

    PubMed

    Madronich, Sasha; Wagner, Mark; Groth, Philip

    2011-08-15

    Improving air quality by reducing ambient ozone (O(3)) will likely lower O(3) concentrations throughout the troposphere and increase the transmission of solar ultraviolet (UV) radiation to the surface. The changes in surface UV radiation between two control scenarios (nominally 84 and 70 ppb O(3) for summer 2020) in the Eastern two-thirds of the contiguous U.S. are estimated, using tropospheric O(3) profiles calculated with a chemistry-transport model (Community Multi-Scale Air Quality, CMAQ) as inputs to a detailed model of the transfer of solar radiation through the atmosphere (tropospheric ultraviolet-visible, TUV) for clear skies, weighed for the wavelengths known to induce sunburn and skin cancer. Because the incremental emission controls differ according to region, strong spatial variability in O(3) reductions and in corresponding UV radiation increments is seen. The geographically averaged UV increase is 0.11 ± 0.03%, whereas the population-weighted increase is larger, 0.19 ± 0.06%, because O(3) reductions are greater in more densely populated regions. These relative increments in exposure are non-negligible given the already high incidence of UV-related health effects, but are lower by an order of magnitude or more than previous estimates. PMID:21755973

  8. Surface exposure to sunlight stimulates CO2 release from permafrost soil carbon in the Arctic

    PubMed Central

    Cory, Rose M.; Crump, Byron C.; Dobkowski, Jason A.; Kling, George W.

    2013-01-01

    Recent climate change has increased arctic soil temperatures and thawed large areas of permafrost, allowing for microbial respiration of previously frozen C. Furthermore, soil destabilization from melting ice has caused an increase in thermokarst failures that expose buried C and release dissolved organic C (DOC) to surface waters. Once exposed, the fate of this C is unknown but will depend on its reactivity to sunlight and microbial attack, and the light available at the surface. In this study we manipulated water released from areas of thermokarst activity to show that newly exposed DOC is >40% more susceptible to microbial conversion to CO2 when exposed to UV light than when kept dark. When integrated over the water column of receiving rivers, this susceptibility translates to the light-stimulated bacterial activity being on average from 11% to 40% of the total areal activity in turbid versus DOC-colored rivers, respectively. The range of DOC lability to microbes seems to depend on prior light exposure, implying that sunlight may act as an amplification factor in the conversion of frozen C stores to C gases in the atmosphere. PMID:23401500

  9. Surface morphology changes to tungsten under exposure to He ions from an electron cyclotron resonance plasma source

    NASA Astrophysics Data System (ADS)

    Donovan, David; Maan, Anurag; Duran, Jonah; Buchenauer, Dean; Whaley, Josh

    2015-11-01

    Exposure of tungsten to low energy (<100 eV) helium plasmas at temperatures between 900-1900 K in both laboratory experiments and tokamaks has been shown to cause severe nanoscale modification of the near surface resulting the growth of tungsten tendrils. We used a relatively low flux (2.5x1019 ions m-2 s-1) compact ECR plasma source at Sandia-California to investigate the early stages of helium induced tungsten damage. Exposures of polished tungsten discs were performed and characterized using SEM, AFM, and FIB cross section imaging. Bubbles have been seen on the exposed tungsten surface and in sub-surface cross sections growing to up to 150 nm in diameter. Comparisons were made between exposures of warm rolled Plansee tungsten discs and ALMT ITER grade tungsten samples. A similar He plasma exposure stage has now been developed at the University of Tennessee-Knoxville with an improved compact ECR plasma source. Status of the new UTK exposure stage will be discussed as well as planned experiments and new material characterization techniques (EBSD, GIXRD). Work supported by US DOE Contract DE-AC04-94AL85000 and the PSI Science Center.

  10. No surface breaking on the Ecemiş Fault, central Turkey, since Late Pleistocene (~ 64.5 ka); new geomorphic and geochronologic data from cosmogenic dating of offset alluvial fans

    NASA Astrophysics Data System (ADS)

    Sarıkaya, M. A.; Yıldırım, C.; Çiner, A.

    2015-05-01

    The Ecemiş Fault Zone (EF) has been recognized as a major left lateral strike-slip fault in the Central Anatolian Fault Zone (CAFZ) of Turkey. However, its Quaternary slip-rate has been challenging to determine due to the difficulty of dating offset markers. Using high-precision offset measurements and 36Cl cosmogenic nuclide dating, we present the first geochronologically determined Late Quaternary slip-rate for the EF. Our study focuses on the excellent exposures of offset alluvial fan surfaces, originating from the Aladağlar, a Late Quaternary glaciated mountain. Analysis of airborne orthophotogrametry and GNSS (Global Navigation Satellite System) surveys indicates 168 ± 2 m left lateral and 31 ± 1 m vertical displacements. In-situ terrestrial cosmogenic 36Cl geochronology obtained from eleven surface boulders provides a minimum abandonment/incision age of 104.2 ± 16.5 ka for the oldest offset alluvial fan surface. Our geomorphic observations together with Self-potential geophysical surveys revealed the presence of an unfaulted alluvial fan terrace, which allows us to constrain the timing of deformation. The abandonment/incision age of this fan is 64.5 ± 5.6 ka based on thirteen 36Cl depth profile samples. Accordingly, we obtained a geologic fault slip-rate of 4.2 ± 1.9 mm a- 1 horizontally and 0.8 ± 0.3 mm a- 1 vertically for the time frame between 104.2 ± 16.5 ka and 64.5 ± 5.6 ka. Our analysis indicates that the EF has not been producing a major surface breaking earthquake on the main strand at least since 64.5 ± 5.6 ka (mid-Late Pleistocene). This could be the result of abandonment of the main strand and accommodation of deformation by other faults within the EF. Nevertheless, a recently occurred (30 September 2011) low magnitude (ML: 4.3) left lateral strike-slip earthquake indicates recent seismic activity of the EF. Comparison of the recent GPS velocity field with the longer slip history along the CAFZ indicates a constant but low strain

  11. Conserved Regions of Gonococcal TbpB Are Critical for Surface Exposure and Transferrin Iron Utilization

    PubMed Central

    Ostberg, Karen L.; DeRocco, Amanda J.; Mistry, Shreni D.; Dickinson, Mary Kathryne

    2013-01-01

    The transferrin-binding proteins TbpA and TbpB enable Neisseria gonorrhoeae to obtain iron from human transferrin. The lipoprotein TbpB facilitates, but is not strictly required for, TbpA-mediated iron acquisition. The goal of the current study was to determine the contribution of two conserved regions within TbpB to the function of this protein. Using site-directed mutagenesis, the first mutation we constructed replaced the lipobox (LSAC) of TbpB with a signal I peptidase cleavage site (LAAA), while the second mutation deleted a conserved stretch of glycine residues immediately downstream of the lipobox. We then evaluated the resulting mutants for effects on TbpB expression, surface exposure, and transferrin iron utilization. Western blot analysis and palmitate labeling indicated that the lipobox, but not the glycine-rich motif, is required for lipidation of TbpB and tethering to the outer membrane. TbpB was released into the supernatant by the mutant that produces TbpB LSAC. Neither mutation disrupted the transport of TbpB across the bacterial cell envelope. When these mutant TbpB proteins were produced in a strain expressing a form of TbpA that requires TbpB for iron acquisition, growth on transferrin was either abrogated or dramatically diminished. We conclude that surface tethering of TbpB is required for optimal performance of the transferrin iron acquisition system, while the presence of the polyglycine stretch near the amino terminus of TbpB contributes significantly to transferrin iron transport function. Overall, these results provide important insights into the functional roles of two conserved motifs of TbpB, enhancing our understanding of this critical iron uptake system. PMID:23836816

  12. Origin of orbital debris impacts on Long Duration Exposure Facility's (LDEF) trailing surfaces

    NASA Technical Reports Server (NTRS)

    Kessler, Donald J.

    1992-01-01

    Orbital debris tracked by the US Space Command is mostly in near circular orbit around the Earth. If small debris were in the same types of orbits, there would be very few orbital debris impacts on the Long Duration Exposure Facility's (LDEF's) trailing surfaces. However, at least 15 percent of the impacts found on the trailing A03 gold surface was found to be orbital debris impacts. This measurement suggests that the orbital distribution of small debris is not the same as that of larger debris. Although this is not a total surprise, since modelling of satellite breakups has predicted different distributions, it does raise questions as to what types of orbits could be responsible for these impacts. A model was developed to explain these LDEF results. The model calculates the expected debris impact crater distribution around LDEF, as a function of debris orbital parameters. The results show that only low inclination and highly elliptical orbits could be responsible for these impacts. The most common object left in this type of orbit is an orbital transfer stage, used by the US and ESA to place objects into geosynchronous orbit, and inclinations near 28 and 7 degrees for the US and ESA, respectively. Even large fragments from satellites, which break up in these types of orbits, are difficult to observe from the ground; consequently, little is known about the number and characteristics of breakups in these orbits. The LDEF data suggest that these objects are breaking up. The LDEF data also suggest that the ratio of the contribution of small debris from this type of orbit to the contribution from circular orbits is about an order of magnitude larger than the same ratio for debris tracked by the US Space Command.

  13. Poly(vinyl alcohol) hydrogel coatings with tunable surface exposure of hydroxyapatite

    PubMed Central

    Moreau, David; Villain, Arthur; Ku, David N; Corté, Laurent

    2014-01-01

    Insufficient bone anchoring is a major limitation of artificial substitutes for connective osteoarticular tissues. The use of coatings containing osseoconductive ceramic particles is one of the actively explored strategies to improve osseointegration and strengthen the bone-implant interface for general tissue engineering. Our hypothesis is that hydroxyapatite (HA) particles can be coated robustly on specific assemblies of PVA hydrogel fibers for the potential anchoring of ligament replacements. A simple dip-coating method is described to produce composite coatings made of microscopic hydroxyapatite (HA) particles dispersed in a poly(vinyl alcohol) (PVA) matrix. The materials are compatible with the requirements for implant Good Manufacturing Practices. They are applied to coat bundles of PVA hydrogel fibers used for the development of ligament implants. By means of optical and electronic microscopy, we show that the coating thickness and surface state can be adjusted by varying the composition of the dipping solution. Quantitative analysis based on backscattered electron microscopy show that the exposure of HA at the coating surface can be tuned from 0 to over 55% by decreasing the weight ratio of PVA over HA from 0.4 to 0.1. Abrasion experiments simulating bone-implant contact illustrate how the coating cohesion and wear resistance increase by increasing the content of PVA relative to HA. Using pullout experiments, we find that these coatings adhere well to the fiber bundles and detach by propagation of a crack inside the coating. These results provide a guide to select coated implants for anchoring artificial ligaments. PMID:25482413

  14. Poly(vinyl alcohol) hydrogel coatings with tunable surface exposure of hydroxyapatite.

    PubMed

    Moreau, David; Villain, Arthur; Ku, David N; Corté, Laurent

    2014-01-01

    Insufficient bone anchoring is a major limitation of artificial substitutes for connective osteoarticular tissues. The use of coatings containing osseoconductive ceramic particles is one of the actively explored strategies to improve osseointegration and strengthen the bone-implant interface for general tissue engineering. Our hypothesis is that hydroxyapatite (HA) particles can be coated robustly on specific assemblies of PVA hydrogel fibers for the potential anchoring of ligament replacements. A simple dip-coating method is described to produce composite coatings made of microscopic hydroxyapatite (HA) particles dispersed in a poly(vinyl alcohol) (PVA) matrix. The materials are compatible with the requirements for implant Good Manufacturing Practices. They are applied to coat bundles of PVA hydrogel fibers used for the development of ligament implants. By means of optical and electronic microscopy, we show that the coating thickness and surface state can be adjusted by varying the composition of the dipping solution. Quantitative analysis based on backscattered electron microscopy show that the exposure of HA at the coating surface can be tuned from 0 to over 55% by decreasing the weight ratio of PVA over HA from 0.4 to 0.1. Abrasion experiments simulating bone-implant contact illustrate how the coating cohesion and wear resistance increase by increasing the content of PVA relative to HA. Using pullout experiments, we find that these coatings adhere well to the fiber bundles and detach by propagation of a crack inside the coating. These results provide a guide to select coated implants for anchoring artificial ligaments. PMID:25482413

  15. Selecting scenarios to assess exposure of surface waters to veterinary medicines in Europe.

    PubMed

    Schneider, Manuel K; Stamm, Christian; Fenner, Kathrin

    2007-07-01

    Registering a veterinary medicinal product (VMP) in the European Union requires assessing its potential to contaminate surface waters (SW) on a European scale. VMP are spread to land in manure or excreted during grazing and may enter SW through runoff, erosion, or leaching. Since the factors driving these processes vary largely across Europe, it is necessary to identify characteristic conditions, so-called scenarios, under which VMP enter SW. These scenarios may guide the parameterization of mechanistic fate models to predict environmental concentrations for environmental risk assessment. A number of such scenarios for pesticides and VMP have been developed rather pragmatically. Here, we describe how a geo-referenced European database of driving factors was used to divide the European environment into groups with similar conditions for SW contamination by VMP. Out of these groups, relevant exposure scenarios in Europe were selected by a simple scoring system. Comparing these to the existing scenarios showed that a number of situations are not well covered. The newly identified scenarios are primarily located in hilly areas of Central Europe and the Mediterranean, and in Eastern European plains with a continental climate. We recommend that they are included in the technical guidelines for higher-tier assessment of VMP. PMID:17695913

  16. Surface exposure dating of moraines and alluvial fans in the Southern Central Andes

    NASA Astrophysics Data System (ADS)

    Terrizzano, Carla; Zech, Roland; García Morabito, Ezequiel; Haghipour, Negar; Christl, Marcus; Likermann, Jeremías; Tobal, Jonathan; Yamin, Marcela

    2016-04-01

    The role of tectonics versus climate in controlling the evolution of alluvial fans in discussed controversially. The southern Central Andes and their forelands provide a perfect setting to study climate versus tectonic control of alluvial fans. On the one hand, the region is tectonically active and alluvial fan surfaces are offset by faults. The higher summits, on the other hand, are glaciated today, and glacial deposits document past periods of lower temperatures and increased precipitation. We applied 10Be surface exposure dating on 5 fan terraces 4 moraines of the Ansilta range (31.6°S - 69.8°W) using boulders and amalgamated pebbles to explore their chronological relationship. From youngest to oldest, the alluvial fan terraces yield minimum ages of 15 ± 1 ka (T1), 97 ± 9 ka (T2), 141 ± 9 ka (T3), 286 ± 14 ka (T4) and 570 ± 57 ka (T5). Minimum ages derived from moraines are 14 ± 1 ka (M1), 22 ± 2 ka (M2), 157 ± 14 ka (M3) and 351 ± 33 ka (M4), all calculations assuming no erosion and using the scaling scheme for spallation based on Lal 1991, Stone 2000. The moraines document glacial advances during cold periods at the marine isotope stages (MIS) 2, 6 and 10. The terraces T1, T3 seem to be geomorphologic counterparts during MIS 2 and 6. We suggest that T2, T4 and T5 document aggradation during the cold periods MIS 5d, 8 and 14 in response to glacial advances, although the respective moraines are not preserved. Our results highlight: i) the arid climate in the Southern Central Andes favors the preservation of glacial and alluvial deposits allowing landscape and climate reconstructions back to ~570 ka), ii) alluvial deposits correlate with moraines or fall into cold glacial times, so that climate, and in particular the existence of glaciers, seems to be the main forcing of alluvial fan formation at our study site. References Lal, D., 1991: Cosmic ray labeling of erosion surfaces: In situ nuclide production rates and erosion models. Earth and Planetary

  17. 10Be surface exposure dating reveals strong active deformation in the central Andean backarc interior

    NASA Astrophysics Data System (ADS)

    García Morabito, Ezequiel; Terrizzano, Carla; Zech, Roland; Willett, Sean; Yamin, Marcela; Haghipour, Negar; Wuethrich, Lorenz; Christl, Marcus; María Cortes, José; Ramos, Victor

    2016-04-01

    Understanding the deformation associated with active thrust wedges is essential to evaluate seismic hazard. How is active faulting distributed throughout the wedge, and how much deformation is taken up by individual structures? We address these questions for our study region, the central Andean backarc of Argentina. We combined a structural and geomorphological approach with surface exposure dating (10Be) of alluvial fans and strath terraces in two key localities at ~32° S: the Cerro Salinas, located in the active orogenic front of the Precordillera, and the Barreal block in the interior of the Andean mountain range. We analysed 22 surface samples and 6 depth profiles. At the thrust front, the oldest terrace (T1) yields an age of 100-130 ka, the intermediate terrace (T2) between 40-95 ka, and the youngest terrace (T3) an age of ~20 ka. In the Andean interior, T1´ dates to 117-146 ka, T2´ to ~70 ka, and T3´ to ~20 ka, all calculations assuming negligible erosion and using the scaling scheme for spallation based on Lal 1991, Stone 2000. Vertical slip rates of fault offsets are 0.3-0.5 mm/yr and of 0.6-1.2 mm/yr at the thrust front and in the Andean interior, respectively. Our results highlight: i) fault activity related to the growth of the Andean orogenic wedge is not only limited to a narrow thrust front zone. Internal structures have been active during the last 150 ka, ii) deformation rates in the Andean interior are comparable or even higher that those estimated and reported along the emerging thrust front, iii) distribution of active faulting seems to account for unsteady state conditions, and iv) seismic hazards may be more relevant in the internal parts of the Andean orogen than assumed so far. References Lal, D., 1991: Cosmic ray labeling of erosion surfaces: In situ nuclide production rates and erosion models. Earth and Planetary Science Letters 104: 424-439. Stone, J.O., 2000: Air pressure and cosmogenic isotope production. Journal of Geophysical

  18. Depositional and surface exposure history of the Shorty Crater core 74001/2 - FMR and magnetic studies

    NASA Technical Reports Server (NTRS)

    Morris, R. V.; Gose, W. A.; Lauer, H. V., Jr.

    1978-01-01

    Surface exposure (maturity) indices and concentrations of FeO and metallic iron were determined at 0.5-cm intervals of the Apollo 17 core section, which sampled a pyroclastic deposit on the rim of Shorty Crater. The determinations showed that all of the soil in the core is extremely immature. An exposure history of the core is proposed: accumulation (about 3.6 billion years ago), shallow burial (during the first 20 million years), deep burial (till about 10-15 million years ago), followed by excavation (10-15 million years ago), and in situ reworking (till the present).

  19. Effect of Air Exposure on Surface Properties, Electronic Structure, and Carrier Relaxation in PbSe Nanocrystals

    SciTech Connect

    Sykora, Milan; Koposov, Alexey Y.; McGuire, John A.; Schulze, Roland K.; Tretiak, Olexandr; Pietryga, Jeffrey M.; Klimov, Victor

    2010-04-27

    Effects of air exposure on surface properties, electronic structure, and carrier relaxation dynamics in colloidal PbSe nanocrystals (NCs) were studied using X-ray photoelectron spectroscopy, transmission electron microscopy, and steady-state and time-resolved photoluminescence (PL) spectroscopies. We show that exposure of NC hexane solutions to air under ambient conditions leads to rapid oxidation of NCs such that up to 50% of their volume is transformed into PbO, SeO{sub 2}, or PbSeO{sub 3} within 24 h. The oxidation is a thermally activated process, spontaneous at room temperature. The oxidation-induced reduction in the size of the PbSe “core” increases quantum confinement, causing shifts of the PL band and the absorption onset to higher energies. The exposure of NC solutions to air also causes rapid (within minutes) quenching of PL intensity followed by slow (within hours) recovery during which the PL quantum yield can reach values exceeding those observed prior to the air exposure. The short-term PL quenching is attributed to enhanced carrier trapping induced by adsorption of oxygen onto the NC surface, while the PL recovery at longer times is predominantly due to reduction in the efficiency of the “intrinsic” nonradiative interband recombination caused by the increase of the band gap in oxidized NCs. Although the analysis of subnanosecond relaxation dynamics in air-exposed NCs is complicated by a significant enhancement in fast carrier trapping, our picosecond PL measurements suggest that air exposure likely has only a weak effect on Auger recombination and also does not significantly affect the efficiency of carrier multiplication. We also show that the effects of air exposure are partially suppressed in PbSe/CdSe core/shell structures.

  20. Alteration of the Carbon and Nitrogen Isotopic Composition in the Martian Surface Rocks Due to Cosmic Ray Exposure

    NASA Technical Reports Server (NTRS)

    Pavlov, A. A.; Pavlov, A. K.; Ostryakov, V. M.; Vasilyev, G. I.; Mahaffy, P.; Steele, A.

    2014-01-01

    C-13/C-12 and N-15/N-14 isotopic ratios are pivotal for our understanding of the Martian carbon cycle, history of the Martian atmospheric escape, and origin of the organic compounds on Mars. Here we demonstrate that the carbon and nitrogen isotopic composition of the surface rocks on Mars can be significantly altered by the continuous exposure of Martian surface to cosmic rays. Cosmic rays can effectively produce C-13 and N-15 isotopes via spallation nuclear reactions on oxygen atoms in various Martian rocks. We calculate that in the top meter of the Martian rocks, the rates of production of both C-13 and N-15 due to galactic cosmic rays (GCRs) exposure can vary within 1.5-6 atoms/cm3/s depending on rocks' depth and chemical composition. We also find that the average solar cosmic rays can produce carbon and nitrogen isotopes at a rate comparable to GCRs in the top 5-10 cm of the Martian rocks. We demonstrate that if the total carbon content in a surface Martian rock is <10 ppm, then the "light," potentially "biological" C-13/C-12 ratio would be effectively erased by cosmic rays over 3.5 billion years of exposure. We found that for the rocks with relatively short exposure ages (e.g., 100 million years), cosmogenic changes in N-15/N-14 ratio are still very significant. We also show that a short exposure to cosmic rays of Allan Hills 84001 while on Mars can explain its high-temperature heavy nitrogen isotopic composition (N-15/N-14). Applications to Martian meteorites and the current Mars Science Laboratory mission are discussed.

  1. Proteins IA and IB exhibit different surface exposures and orientations in the outer membranes of Neisseria gonorrhoeae.

    PubMed Central

    Barrera, O; Swanson, J

    1984-01-01

    Exposure of whole gonococci to proteinase K resulted in cleavage of protein I (P.I) of the organism in situ. P.I subunits in the P.IB group were cleaved into two membrane-associated fragments, whereas P.IA subunits were cleaved by proteinase K to yield a single membrane-associated fragment slightly smaller in apparent size than the intact P.IA subunit. These data suggest that P.IA and P.IB subunits are quite different in their surface exposures and orientations in the gonococcal outer membrane; P.IB subunits likely have both termini buried in the membrane, whereas P.IA subunits have one of their termini exposed on the surface of the organism. Images PMID:6427111

  2. Formation of super'' As-rich GaAs(100) surfaces by high temperature exposure to arsine

    SciTech Connect

    Banse, B.A.; Creighton, J.R. )

    1992-02-17

    We report that arsine exposures between 100 and 350 {degree}C will produce super'' As-rich surfaces (arsenic coverages of up to {similar to}1.7 monolayers (ML, where 1 ML=6.26{times}10{sup 14} atoms cm{sup {minus}2})) of GaAs(100) that exhibit a {ital c}(4{times}4) low energy electron diffraction pattern. Temperature programmed desorption studies show that after AsD{sub 3} exposures of up to 2.6{times}10{sup 6} L (1 L=1{times}10{sup {minus}6} Torr s) to the Ga-stabilized surface, three excess As desorption speaks are observed with maxima at 440, 480, and 570 {degree}C. As{sub 4} desorption is detected from the lowest temperature state, while the other states desorb primarily as As{sub 2}. The significance of these results for the understanding of the atomic layer epitaxy process is addressed.

  3. Uniform metal patterning on micromachined 3D surfaces using multistep exposure of UV light

    NASA Astrophysics Data System (ADS)

    Suriadi, Arief; Berauer, Frank; Yasunaga, Akari; Pan, Alfred I.; Vander Plas, Hubert A.

    2002-07-01

    Focal depth limitations prevent use of normal lithography tools and processes on three-dimensional structures. A relatively little known form of uniform metal trace patterning over extreme 3-D structured wafers by a multi-step exposure method, called stitching technology, has recently been developed by Hewlett-Packard Company, with equipment support from the Ultratech Stepper Company, the result of which is being reported in this paper. The basic idea is to slice the metal lines to be patterned into topographic layers that can each be exposed in one step. Patches of patterned metal lines can thus be stitch-ed to one another (thus, the term stitching). Exposure of one photo-resist layer by stitching takes several individual exposures at different focus planes. A patent has been applied for this method on behalf of the Hewlett Packard Company. Results of the present investigation demonstrate the superior uniformity of metal trace pattern over 350-um deep trenches produced by multi-step exposure, as compared to the conventional single-step exposure method, typically used on planar semiconductor wafer. The integrated method offers an enabling technology for patterning of extensive topography typically required for a multitude of MEMS structures and designs, novel interconnect structures as well as advanced packaging applications. The method is simple, accurate and relatively low-cost in comparison with other 3-D exposure techniques available and capable of 3-D structure patterning.

  4. Measurement of long-lived radionuclides in surface soil around F1NPP accident site by Accelerator Mass Spectrometry

    NASA Astrophysics Data System (ADS)

    Miyake, Yasuto; Matsuzaki, Hiroyuki; Sasa, Kimikazu; Takahashi, Tsutomu

    2015-10-01

    In March 2011, vast amounts of radionuclides were released into the environment due to the Fukushima Daiichi Nuclear Power Plant (F1NPP) accident. However, very little work has been done concerning accident-derived long-lived nuclides such as 129I (T1/2 = 1.57 × 107 year) and 36Cl (T1/2 = 3.01 × 105 year). 129I and 131I are both produced by 235U fission in nuclear reactors. Being isotopes of iodine, these nuclides are expected to behave similarly in the environment. This makes 129I useful for retrospective reconstruction of 131I distribution during the initial stages of the accident. On the other hand, 36Cl is generated during reactor operation via neutron capture reaction of 35Cl, an impurity in the coolant or reactor component. Resulting 36Cl/Cl ratio within the reactor is thus much higher compared to that in environment. Similar to 129I, 36Cl is expected to have leaked out during the accident and it is important to evaluate its effects. In this study, 129I concentrations were determined in several surface soil samples collected around F1NPP. Average 129I/131I ratio was estimated to be 26.1 ± 5.8 as of March 11, 2011, consistent with calculations using ORIGEN2 code and other published data. 36Cl/Cl ratios in some of the soil samples were likewise measured and ranged from 1.1 × 10-12 to 2.6 × 10-11. These are higher compared to ratios measured around F1NPP before the accident. A positive correlation between 36Cl and 129I concentration was observed.

  5. Neotectonic deformation versus climate control in the Central Andes of Argentina, insights from 10Be Surface Exposure Dating

    NASA Astrophysics Data System (ADS)

    Terrizzano, Carla; Zech, Roland; Garcia Morabito, Ezequiel; Yamin, Marcela; Haghipour, Negar; Wüthrich, Lorenz; Christl, Marcus

    2015-04-01

    Mountainous regions and their forelands commonly supports a suite of landforms sensitive to climate change and tectonics, providing -if addressed with appropriate geomorphological and geochronological approaches- record for landscape, climate, and tectonic evolution. In particular, alluvial fans are valuable archives of Quaternary climate and tectonics. The southern Central Andes and their forelands provide a perfect setting to study such forcings, since first, the extreme aridity favors the geomorphological preservation of the fan surfaces, so that 10Be surface exposure dating can be applied to establish robust and precise chronologies. And second, the neotectonic activity in this region results in widespread deformation of Quaternary deposits and recent devastating earthquakes. However, rates of uplift and shortening on the reverse faults remain largely unknown and very little is known yet about the Pleistocene climate history in the southern Central Andes, which limits a robust evaluation of the role of climate for the alluvial fan formation and landscape evolution. We combined structural and geomorphic investigations with 10Be surface exposure dating in the western Precordillera of the Southern Central Andes of Argentina (31°30'-31°53' SL/69°20' WL) in order to establish a numeric chronology for four deformed alluvial fan surfaces, to estimate uplift rates and to evaluate the potential climate role in controlling the fan construction and evolution. Surface exposure ages were determined for a few large boulders, amalgamated pebbles, and via depth profiles on sand samples. Boulder ages range from 145 to 212 ka for the oldest well-preserved fan remnants (Q1a, n=3), from 63 to 108 ka (Q2, n=3) and 21-28 ka (Q3, n=2), amalgamated pebbles yield ages range from 106 to 127 ka for the oldest fan surface (Q1b, n=79), all calculations assuming no erosion and using the scaling scheme for spallation based on Lal 1991, Stone 2000. Boulders from current channels have 10Be

  6. Cosmogenic {sup 3}He surface-exposure dating of stone pavements. Implications for landscape evolution in deserts

    SciTech Connect

    Wells, S.G.; McFadden, L.D.; Poths, J.; Olinger, C.T.

    1995-07-01

    The formation of stone pavements, a ubiquitous gravel armor mantling landforms in arid regions of the world, has been previously attributed to erosion by wind and water or alternating shrinking and swelling of soil horizons, implying that gravel is concentrated at the land surface in a time-transgressive manner. A newly proposed model for pavement evolution differs from these models in that pavement clasts are continuously maintained at the land surface in response to deposition and pedogenic modification of windblown dust. In-situ cosmogenic {sup 3}He surface-exposure ages on volcanic and alluvial landforms in the Mojave Desert of California are used to understand pavement evolution over geologic time scales and to test this new model. These exposure ages are stratigraphically consistent, show internal consistency at each site, and, for stone pavements adjacent to pristine, continuously exposed volcanic bedrock, are indistinguishable at the 1{sigma} level. We conclude that stone pavements are born at the surface and that pavements may provide one of the longest-term records of geologic, hydrologic, and climatic processes operating on desert surfaces. 23 refs., 3 figs., 1 tab.

  7. Reflectance Infrared Spectroscopy on Operating Surface Acoustic Wave Chemical Sensors During Exposure to Gas-Phase Analytes

    SciTech Connect

    Hierlemann, A.; Hill, M.; Ricco, A.J.; Staton, A.W.; Thomas, R.C.

    1999-01-11

    We have developed instrumentation to enable the combination of surface acoustic wave (SAW) sensor measurements with direct, in-situ molecular spectroscopic measurements to understand the response of the SAW sensors with respect to the interfacial chemistry of surface-confined sensing films interacting with gas-phase analytes. Specifically, the instrumentation and software was developed to perform in-situ Fourier-transform infrared external-reflectance spectroscopy (FTIR-ERS) on operating SAW devices during dosing of their chemically modified surfaces with analytes. By probing the surface with IR spectroscopy during gas exposure, it is possible to understand in unprecedented detail the interaction processes between the sorptive SAW coatings and the gaseous analyte molecules. In this report, we provide details of this measurement system, and also demonstrate the utility of these combined measurements by characterizing the SAW and FTIR-ERS responses of organic thin-film sensor coatings interacting with gas-phase analytes.

  8. Anterior cingulate cortex surface area relates to behavioral inhibition in adolescents with and without heavy prenatal alcohol exposure.

    PubMed

    Migliorini, Robyn; Moore, Eileen M; Glass, Leila; Infante, M Alejandra; Tapert, Susan F; Jones, Kenneth Lyons; Mattson, Sarah N; Riley, Edward P

    2015-10-01

    Prenatal alcohol exposure is associated with behavioral disinhibition, yet the brain structure correlates of this deficit have not been determined with sufficient detail. We examined the hypothesis that the structure of the anterior cingulate cortex (ACC) relates to inhibition performance in youth with histories of heavy prenatal alcohol exposure (AE, n = 32) and non-exposed controls (CON, n = 21). Adolescents (12-17 years) underwent structural magnetic resonance imaging yielding measures of gray matter volume, surface area, and thickness across four ACC subregions. A subset of subjects were administered the NEPSY-II Inhibition subtest. MANCOVA was utilized to test for group differences in ACC and inhibition performance and multiple linear regression was used to probe ACC-inhibition relationships. ACC surface area was significantly smaller in AE, though this effect was primarily driven by reduced right caudal ACC (rcACC). AE also performed significantly worse on inhibition speed but not on inhibition accuracy. Regression analyses with the rcACC revealed a significant group × ACC interaction. A smaller rcACC surface area was associated with slower inhibition completion time for AE but was not significantly associated with inhibition in CON. After accounting for processing speed, smaller rcACC surface area was associated with worse (i.e., slower) inhibition regardless of group. Examining processing speed independently, a decrease in rcACC surface area was associated with faster processing speed for CON but not significantly associated with processing speed in AE. Results support the theory that caudal ACC may monitor reaction time in addition to inhibition and highlight the possibility of delayed ACC neurodevelopment in prenatal alcohol exposure. PMID:26025509

  9. Changes of Ocular Surface and the Inflammatory Response in a Rabbit Model of Short-Term Exposure Keratopathy

    PubMed Central

    Lin, Szu-Yuan; Liu, Hsin-Yu; Chang, Huai-Wen; Hu, Fung-Rong; Chen, Wei-Li

    2015-01-01

    Purpose To evaluate the ocular surface change and the inflammatory response in a rabbit model of short-term exposure keratopathy. Methods Short term exposure keratopathy by continuous eyelid opening was induced in New Zealand white rabbits for up to 4 hours. Ultrasound pachymetry was used to detect central total corneal thickness. In vivo confocal microscopy and impression cytology were performed to evaluate the morphology of ocular surface epithelium and the infiltration of inflammatory cells. Immunohistochemistry for macrophage,neutrophil, CD4(+) T cells, and CD8(+) T cells were performed to classify the inflammatory cells. Scanning electron microscopy(SEM) was performed to detect ocular surface change.The concentrations of IL-8, IL-17, Line and TNF-αwere analyzed by multiplex immunobead assay. TUNEL staining was performed to detect cellular apoptosis. Results Significant decrease ofcentral total cornealthickness were found within the first 5 minutes and remained stable thereafter, while there were no changes of corneal epithelial thickness.No significant change of corneal, limbal and conjunctival epithelial morphology was found by in vivo confocal microscopy except the time dependent increase of superficial cellular defects in the central cornea. Impression cytology also demonstrated time dependent increase of sloughing superficial cells of the central cornea. Aggregations ofinflammatory cells were found at 1 hour in the limbal epithelium, 2 hours in the perilimbal conjunctival epithelium, and 3 hours in the peripheral corneal epithelium.In eyes receiving exposure for 4 hours, the infiltration of the inflammatory cells can still be detected at 8 hours after closing eyes.Immunohistochemical study demonstrated the cells to be macrophages, neutrophils, CD4-T cells and CD-8 T cells.SEM demonstrated time-depending increase of intercellular border and sloughing of superficial epithelial cells in corneal surface. Time dependent increase of IL-8, IL-17 and TNF-α in

  10. Modification of polymeric surface for improved adhesion via electron beam exposure

    DOEpatents

    Kelber, Jeffry A.

    1989-01-01

    Treating polymer surfaces, e.g., Teflon, particularly very thin surfaces, e.g., 50-10,000 .ANG. with low energy electron radiation, e.g., 100-1000 eV, in a high vacuum environment, e.g., less than 10.sup.-6 Torr, to enhance the ability of the surface to be adhered to a variety of substrates.

  11. Surface modifications of fusion reactor relevant materials on exposure to fusion grade plasma in plasma focus device

    NASA Astrophysics Data System (ADS)

    Niranjan, Ram; Rout, R. K.; Srivastava, R.; Chakravarthy, Y.; Mishra, P.; Kaushik, T. C.; Gupta, Satish C.

    2015-11-01

    An 11.5 kJ plasma focus (PF) device was used here to irradiate materials with fusion grade plasma. The surface modifications of different materials (W, Ni, stainless steel, Mo and Cu) were investigated using various available techniques. The prominent features observed through the scanning electron microscope on the sample surfaces were erosions, cracks, blisters and craters after irradiations. The surface roughness of the samples increased multifold after exposure as measured by the surface profilometer. The X-ray diffraction analysis indicated the changes in the microstructures and the structural phase transformation in surface layers of the samples. We observed change in volumes of austenite and ferrite phases in the stainless steel sample. The energy dispersive X-ray spectroscopic analysis suggested alloying of the surface layer of the samples with elements of the PF anode. We report here the comparative analysis of the surface damages of materials with different physical, thermal and mechanical properties. The investigations will be useful to understand the behavior of the perspective materials for future fusion reactors (either in pure form or in alloy) over the long operations.

  12. Results of the "Komplast" experiment on the long-term exposure of materials specimens on the ISS surface

    NASA Astrophysics Data System (ADS)

    Shumov, Andrey; Novikov, Lev

    The "Komplast" materials experiment was designed by the Khrunichev State Research and Production Space Center together with Skobeltsyn Institute of Nuclear Physics, Lomonosov Moscow State University and other Russian scientific institutes, and has been carried out since 1998. The aim of the experiment is to study the complex effects of space factors on specimens of various materials. Eight “Komplast” panels fitted with material specimens equipped UV-sensors and temperature sensors were located on the International Space Station (ISS) Functional Cargo Block (FGB) module exterior surface. The panels were sent into orbit with the FGB when it launched on November 20, 1998. Two of these panels were subsequently returned to Earth by Space Shuttle Discovery after 12 years of LEO exposure. The uniqueness of the "Komplast" experiment determined by long duration of open space exposure, which is much longer than in other similar experiments. For example LDEF: 1984-1990, МЕЕР (Space Station «Mir»): 1996-1997, MISSE-1, -2 (ISS): 1,5-2 years. In this work reveals laboratory research results of some materials specimens, which had been exposed on “Komplast” panels. A distinctive feature of this research was additional irradiation of specimens by atomic oxygen and electrons with energies of ~ 1-8 MeV in laboratory. In the interpretation of the experiment results was taken into account the specimens exposure temperature conditions on the ISS exterior surface and the conditions of their sunlit, defined by the above-mentioned sensors readings. Lot of attention was paid to the investigation of rubber materials specimens. The deformation, mechanical and relaxation characteristics were defined for the specimens. Also were investigations the seals-ability of model rubber seals after the long-term outer exposure. It was determined conservation volumetric deformation and relaxation characteristics of the exposed specimens and the localization of structural changes in the thin

  13. Low level ozone exposure induces airways inflammation and modifies cell surface phenotypes in healthy humans

    EPA Science Inventory

    Background: The effects of low level ozone exposure (0.08 ppm) on pulmonary function in healthy young adults are well known, however much less is known about the inflammatory and immuno-modulatory effects oflow level ozone in the airways. Techniques such as induced sputum and flo...

  14. Occupational and environmental exposure to tribromophenol used for wood surface protection in sawmills.

    PubMed

    Gutiérrez, Manuel; Becerra, José; Godoy, Juan; Barra, Ricardo

    2005-06-01

    This study analyses the occupational and environmental conditions of sawmills where the lumber is protected from microorganism action by dipping it in 2,4,6 tribromophenol (TBP). Three processes were evaluated: hydraulic immersion, chain conveyor system and manual immersion. The biggest occupational exposure to TBP was registered in manual and chain conveyor systems. The average values in the workers' urine for TBP were 6.9 and 5.7 mg/g creatinine, respectively. For environmental exposure, the highest value in well waters was 25.1 microg/L and in soil was 4,602 mg/kg. It could be established that the hydraulic immersion system presents less occupational TBP exposure. Nevertheless, the hydraulic system, as well as the other two anti-stain alternatives, requires the introduction of pollution prevention efforts. To reduce the environmental exposure to TBP, the lumber-dipping tank area, the forklift traffic areas, and the storage areas need to be waterproofed. It is also necessary to implement a TBP solution recovery system to eliminate dripping from the lumber once it is removed from the fungicide dipping tanks. PMID:16134480

  15. Pesticide exposure assessment for surface waters in the EU. Part 1: Some comments on the current procedure.

    PubMed

    Bach, Martin; Diesner, Mirjam; Großmann, Dietlinde; Guerniche, Djamal; Hommen, Udo; Klein, Michael; Kubiak, Roland; Müller, Alexandra; Priegnitz, Jan; Reichenberger, Stefan; Thomas, Kai; Trapp, Matthias

    2016-07-01

    In 2001, the European Commission introduced a risk assessment project known as FOCUS (FOrum for the Coordination of pesticide fate models and their USe) for the surface water risk assessment of active substances in the European Union. Even for the national authorisation of plant protection products (PPPs), the vast majority of EU member states still refer to the four runoff and six drainage scenarios selected by the FOCUS Surface Water Workgroup. However, our study, as well as the European Food Safety Authority (EFSA), has stated the need for various improvements. Current developments in pesticide exposure assessment mainly relate to two processes. Firstly, predicted environmental concentrations (PECs) of pesticides are calculated by introducing model input variables such as weather conditions, soil properties and substance fate parameters that have a probabilistic nature. Secondly, spatially distributed PECs for soil-climate scenarios are derived on the basis of an analysis of geodata. Such approaches facilitate the calculation of a spatiotemporal cumulative distribution function (CDF) of PECs for a given area of interest and are subsequently used to determine an exposure concentration endpoint as a given percentile of the CDF. For national PPP authorisation, we propose that, in the future, exposure endpoints should be determined from the overall known statistical PEC population for an area of interest, and derived for soil and climate conditions specific to the particular member state. © 2016 Society of Chemical Industry. PMID:27059427

  16. Interaction of gases with lunar materials. [surface properties of lunar fines, especially on exposure to water vapor

    NASA Technical Reports Server (NTRS)

    Holmes, H. F.; Gammage, R. B.

    1975-01-01

    The surface properties of lunar fines were investigated. Results indicate that, for the most part, these properties are independent of the chemical composition and location of the samples on the lunar surface. The leaching of channels and pores by adsorbed water vapor is a distinguishing feature of their surface chemistry. The elements of air, if adsorbed in conjunction with water vapor or liquid water, severely impedes the leaching process. In the absence of air, liquid water is more effective than water vapor in attacking the grains. The characteristics of Apollo 17 orange fines were evaluated and compared with those of other samples. The interconnecting channels produced by water vapor adsorption were found to be wider than usual for other types of fines. Damage tracks caused by heavy cosmic ray nuclei and an unusually high halogen content might provide for stronger etching conditions upon exposure to water vapor.

  17. Use of land surface remotely sensed satellite and airborne data for environmental exposure assessment in cancer research

    USGS Publications Warehouse

    Maxwell, S.K.; Meliker, J.R.; Goovaerts, P.

    2010-01-01

    In recent years, geographic information systems (GIS) have increasingly been used for reconstructing individual-level exposures to environmental contaminants in epidemiological research. Remotely sensed data can be useful in creating space-time models of environmental measures. The primary advantage of using remotely sensed data is that it allows for study at the local scale (e.g., residential level) without requiring expensive, time-consuming monitoring campaigns. The purpose of our study was to identify how land surface remotely sensed data are currently being used to study the relationship between cancer and environmental contaminants, focusing primarily on agricultural chemical exposure assessment applications. We present the results of a comprehensive literature review of epidemiological research where remotely sensed imagery or land cover maps derived from remotely sensed imagery were applied. We also discuss the strengths and limitations of the most commonly used imagery data (aerial photographs and Landsat satellite imagery) and land cover maps. ?? 2010 Nature Publishing Group All rights reserved.

  18. Surface Evaluation by X-Ray Photoelectron Spectroscopy of High Performance Polyimide Foams After Exposure to Oxygen Plasma

    NASA Technical Reports Server (NTRS)

    Melendez, Orlando; Hampton, Michael D.; Williams, Martha K.; Brown, Sylvia F.; Nelson, Gordon L.; Weiser, Erik S.

    2002-01-01

    Aromatic polyimides have been attractive in the aerospace and electronics industries for applications such as cryogenic insulation, flame retardant panels and structural subcomponents. Newer to the arena of polyimides is the synthesis of polyimide foams and their applications. In the present work, three different, closely related, polyimide foams developed by NASA Langley Research Center (LaRC) are studied by X-ray Photoelectron Spectroscopy (XPS) after exposure to radio frequency generated Oxygen Plasma. Although polyimide films exposure to atomic oxygen and plasma have been studied previously and reported, the data relate to films and not foams. Foams have much more surface area and thus present new information to be explored. Understanding degradation mechanisms and properties versus structure, foam versus solid is of interest and fundamental to the application and protection of foams exposed to atomic oxygen in Low Earth Orbit (LEO).

  19. Controlled free edge effects in surface wrinkling via combination of external straining and selective O2 plasma exposure.

    PubMed

    Yang, Yang; Han, Xue; Ding, Weilian; Jiang, Shichun; Cao, Yanping; Lu, Conghua

    2013-06-11

    Herein the edge effect from the traction-free boundary condition is utilized to direct the spontaneous surface wrinkling. This boundary condition is attained by a simple combination of mechanical straining and selective exposure of polydimethylsiloxane (PDMS) substrate to O2 plasma (OP) through a copper grid. When the strained PDMS sheet is subjected to selective OP treatment, a patterned heterogeneous surface composed of the OP-exposed "hard" oxidized SiOx region (denoted as D1) and the OP-unexposed "soft" region (denoted as D2) is produced. The subsequent full release of the prestrain (ε(pre)) leads to the selective wrinkling in D1, rather than in D2. It is seen that even in D1, no wrinkling occurs in the vicinity of the D1 edge that is perpendicular to the wavevector. Furthermore, the average wrinkle wavelength in D1 (λ(D1)) is smaller than that of the exposed copper grid-free blank area (λ(blank)). This wavelength decrement between λ(D1) and λ(blank), which can be used to roughly estimate the edge-effect extent, increases with the applied mesh number of copper grids and exposure duration, while decreases with the increase of ε(pre). Meanwhile, there exists a decrease in the amplitude of the patterned wrinkles, when compared with that of the blank region. Additionally, hierarchical wrinkling is induced when the strain-free PDMS substrate is selectively exposed to OP, followed by uniaxial stretching and the subsequent blanket exposure. Consequently, oriented wrinkles perpendicular to the stretching direction are generated in D2. With respect to D1, no wrinkling happens or orthogonal wrinkles occur in this region depending on the applied mesh number, exposure duration, and ε(pre). In the above wrinkling process, the combinative edge effects in two perpendicular directions that are involved sequentially have been discussed. PMID:23705830

  20. Estimating dermal transfer of copper particles from the surfaces of pressure-treated lumber and implications for exposure.

    PubMed

    Platten, William E; Sylvest, Nicholas; Warren, Casey; Arambewela, Mahendranath; Harmon, Steve; Bradham, Karen; Rogers, Kim; Thomas, Treye; Luxton, Todd Peter

    2016-04-01

    Lumber pressure-treated with micronized copper was examined for the release of copper and copper micro/nanoparticles using a surface wipe method to simulate dermal transfer. In 2003, the wood industry began replacing CCA treated lumber products for residential use with copper based formulations. Micronized copper (nano to micron sized particles) has become the preferred treatment formulation. There is a lack of information on the release of copper, the fate of the particles during dermal contact, and the copper exposure level to children from hand-to-mouth transfer. For the current study, three treated lumber products, two micronized copper and one ionic copper, were purchased from commercial retailers. The boards were left to weather outdoors for approximately 1year. Over the year time period, hand wipe samples were collected periodically to determine copper transfer from the wood surfaces. The two micronized formulations and the ionic formulation released similar levels of total copper. The amount of copper released was high initially, but decreased to a constant level (~1.5mgm(-2)) after the first month of outdoor exposure. Copper particles were identified on the sampling cloths during the first two months of the experiment, after which the levels of copper were insufficient to collect interpretable data. After 1month, the particles exhibited minimal changes in shape and size. At the end of 2-months, significant deterioration of the particles was evident. Based on the wipe sample data, a playground visit may result in a potential exposure to 2.58mg of copper, which is near or exceeds the daily tolerable upper intake limits for children under the age of 8, if completely ingested through hand-to-mouth transfer. While nanoparticles were found, there is not enough information to estimate the exposure from the released particles due to a lack of published literature on copper carbonate. PMID:26826852

  1. Experimental studies of first mirror exposure and surface recovery on EAST

    NASA Astrophysics Data System (ADS)

    Yan, R.; Ding, R.; Chen, J. L.; Chen, L. W.

    2015-08-01

    Systematic studies of first mirrors (FMs) contamination, deposition mitigation and cleaning have been performed in EAST and laboratory. It turned out that the auxiliary systems such as gas puffing, wall conditioning and limiters could lead to a serious deposition on FMs and result in at least 60% degradation of the reflectivity. Besides, the exposure environment and depth-diameter ratios (DDRs) of the protective ducts will influence the degree of deposition mitigation and homogeneity of deposition. The reflectivity of the FM protected with duct at the wavelength of 240-400 nm could sharply decrease at the beginning of the exposure, which differs from that in the wavelength range more than 400 nm. In addition, the total and specular reflectivity of FM cleaned by radio frequency magnetron sputtering plasma (RFMSP) could be recovered by up to 90% and 80 % respectively in the wavelength range of 300-800 nm.

  2. Acute exposure to silica nanoparticles aggravate airway inflammation: different effects according to surface characteristics

    PubMed Central

    Park, Hye Jung; Sohn, Jung-Ho; Kim, Yoon-Ju; Park, Yoon Hee; Han, Heejae; Park, Kyung Hee; Lee, Kangtaek; Choi, Hoon; Um, Kiju; Choi, In-Hong; Park, Jung-Won; Lee, Jae-Hyun

    2015-01-01

    Silica nanoparticles (SNPs) are widely used in many scientific and industrial fields despite the lack of proper evaluation of their potential toxicity. This study examined the effects of acute exposure to SNPs, either alone or in conjunction with ovalbumin (OVA), by studying the respiratory systems in exposed mouse models. Three types of SNPs were used: spherical SNPs (S-SNPs), mesoporous SNPs (M-SNPs), and PEGylated SNPs (P-SNPs). In the acute SNP exposure model performed, 6-week-old BALB/c female mice were intranasally inoculated with SNPs for 3 consecutive days. In the OVA/SNPs asthma model, the mice were sensitized two times via the peritoneal route with OVA. Additionally, the mice endured OVA with or without SNP challenges intranasally. Acute SNP exposure induced significant airway inflammation and airway hyper-responsiveness, particularly in the S-SNP group. In OVA/SNPs asthma models, OVA with SNP-treated group showed significant airway inflammation, more than those treated with only OVA and without SNPs. In these models, the P-SNP group induced lower levels of inflammation on airways than both the S-SNP or M-SNP groups. Interleukin (IL)-5, IL-13, IL-1β and interferon-γ levels correlated with airway inflammation in the tested models, without statistical significance. In the mouse models studied, increased airway inflammation was associated with acute SNPs exposure, whether exposed solely to SNPs or SNPs in conjunction with OVA. P-SNPs appear to be relatively safer for clinical use than S-SNPs and M-SNPs, as determined by lower observed toxicity and airway system inflammation. PMID:26183169

  3. Surface Exposure Ages of Space-Weathered Grains from Asteroid 25143 Itokawa

    NASA Technical Reports Server (NTRS)

    Keller, L. P.; Berger, E. L.; Christoffersen, R.

    2015-01-01

    We use the observed effects of solar wind ion irradiation and the accumulation of solar flare particle tracks recorded in Itokawa grains to constrain the rates of space weathering and yield information about regolith dynamics. The track densities are consistent with exposure at mm depths for 104-105 years. The solar wind damaged rims form on a much faster timescale, <10(exp 3) years.

  4. Mars surface radiation exposure for solar maximum conditions and 1989 solar proton events.

    NASA Astrophysics Data System (ADS)

    Simonsen, L. C.; Nealy, J. E.

    1993-02-01

    The Langley heavy-ion/nucleon and the high-energy nucleon transport codes are used to predict the propagation of galactic cosmic rays (GCR's) and solar flare protons through the carbon dioxide atmosphere of Mars. Particle fluences and the resulting doses are estimated on the surface of Mars for GCR's during solar maximum conditions and the August, September, and October 1989 solar proton events. Surface doses are estimated with both a low-density and a high-density carbon dioxide model of the atmosphere for altitudes of 0, 4, 8, and 12 km above the surface. A solar modulation function is incorporated to estimate the GCR dose variation between solar minimum and maximum conditions over the 11-year solar cycle. By using current Mars mission scenarios, doses to the skin, eye, and blood-forming organs are predicted for short- and long-duration stay times on the Martian surface throughout the solar cycle.

  5. Surface modifications of W divertor components for EAST during exposure to high heat loads with He

    NASA Astrophysics Data System (ADS)

    Li, C.; Greuner, H.; Yuan, Y.; Zhao, S. X.; Luo, G. N.; Böswirth, B.; Fu, B. Q.; Jia, Y. Z.; Liu, X.; Liu, W.

    2015-08-01

    Flat-type W/Cu plasma-facing components have been developed for the new generation divertor of the Chinese Experimental Advanced Superconducting Tokamak. Surface modifications of such actively water-cooled W components following short and long pulse high heat loading coupled with He particle loads with fluence of 3 × 1022 m-2 have been investigated. An adiabatically loaded W block was investigated as a comparison and exposed to short pulse loads. Blistering was observed on all sample surfaces, but was less pronounced on the components than on the W block, due to the significant lower surface temperature caused by active cooling. For components, longer pulse loads gave rise to a rougher surface. Furthermore, most blisters on components are found to be less than 1 μm in diameter, with just a very few blisters larger than 1 μm, observed only in some near <1 1 1> grains.

  6. Cell-based metabolomics for assessing chemical exposure and toxicity of environmental surface waters (presentation)

    EPA Science Inventory

    Introduction: Waste water treatment plants (WWTPs), concentrated animal feeding operations (CAFOs), mining activities, and agricultural operations release contaminants that negatively affect surface water quality. Traditional methods using live animals (e.g. fish) to monitor/as...

  7. Cell-based Metabolomics for Assessing Chemical Exposure and Toxicity of Environmental Surface Waters

    EPA Science Inventory

    Waste water treatment plants (WWTPs), concentrated animal feeding operations (CAFOs), mining activities, and agricultural operations release contaminants that negatively affect surface water quality. Traditional methods using live animals/fish to monitor/assess contaminant exposu...

  8. LGM and Late Glacial glacier advances in the Cordillera Real and Cochabamba (Bolivia) deduced from 10Be surface exposure dating

    NASA Astrophysics Data System (ADS)

    Zech, R.; Kull, Ch.; Kubik, P. W.; Veit, H.

    2007-06-01

    Surface exposure dating (SED) is an innovative tool being already widely applied for moraine dating and for Late Quaternary glacier and climate reconstruction. Here we present exposure ages of 28 boulders from the Cordillera Real and the Cordillera Cochabamba, Bolivia. Our results indicate that the local Last Glacial Maximum (LGM) in the Eastern Cordilleras occurred at ~22-25 ka and thus synchronous to the global temperature minimum. We were also able to date several Late Glacial moraines to ~11-13 ka, which likely document lower temperatures and increased precipitation ("Coipasa" humid phase). Additionally, we recognize the existence of older Late Glacial moraines re-calculated to ~15 ka from published cosmogenic nuclide data. Those may coincide with the cold Heinrich 1 event in the North Atlantic region and the pronounced "Tauca" humid phase. We conclude that (i) exposure ages in the tropical Andes may have been substantially overestimated so far due to methodological uncertainties, and (ii) although precipitation plays an important role for glacier mass balances in the tropical Andes, it becomes the dominant forcing for glaciation only in the drier and thus more precipitation-sensitive regions further west and south.

  9. LGM and Late Glacial glacier advances in the Cordillera Real and Cochabamba (Bolivia) deduced from 10Be surface exposure dating

    NASA Astrophysics Data System (ADS)

    Zech, R.; Kull, Ch.; Kubik, P. W.; Veit, H.

    2007-10-01

    Surface exposure dating (SED) is an innovative tool already being widely applied for moraine dating and for Late Quaternary glacier and climate reconstruction. Here we present exposure ages of 28 boulders from the Cordillera Real and the Cordillera Cochabamba, Bolivia. Our results indicate that the local Last Glacial Maximum (LGM) in the Eastern Cordilleras occurred at ~22-25 ka and was thus synchronous to the global temperature minimum. We were also able to date several Late Glacial moraines to ~11-13 ka, which likely document lower temperatures and increased precipitation ("Coipasa" humid phase). Additionally, we recognize the existence of older Late Glacial moraines re-calculated to ~15 ka from published cosmogenic nuclide data. Those may coincide with the cold Heinrich 1 event in the North Atlantic region and the pronounced "Tauca" humid phase. We conclude that (i) exposure ages in the tropical Andes may have been overestimated so far due to methodological uncertainties, and (ii) although precipitation plays an important role for glacier mass balances in the tropical Andes, it becomes the dominant forcing for glaciation only in the drier and thus more precipitation-sensitive regions farther west and south.

  10. Mars surface radiation exposure for solar maximum conditions and 1989 solar proton events

    NASA Astrophysics Data System (ADS)

    Simonsen, Lisa C.; Nealy, John E.

    1992-02-01

    The Langley heavy-ion/nucleon transport code, HZETRN, and the high-energy nucleon transport code, BRYNTRN, are used to predict the propagation of galactic cosmic rays (GCR's) and solar flare protons through the carbon dioxide atmosphere of Mars. Particle fluences and the resulting doses are estimated on the surface of Mars for GCR's during solar maximum conditions and the Aug., Sep., and Oct. 1989 solar proton events. These results extend previously calculated surface estimates for GCR's at solar minimum conditions and the Feb. 1956, Nov. 1960, and Aug. 1972 solar proton events. Surface doses are estimated with both a low-density and a high-density carbon dioxide model of the atmosphere for altitudes of 0, 4, 8, and 12 km above the surface. A solar modulation function is incorporated to estimate the GCR dose variation between solar minimum and maximum conditions over the 11-year solar cycle. By using current Mars mission scenarios, doses to the skin, eye, and blood-forming organs are predicted for short- and long-duration stay times on the Martian surface throughout the solar cycle.

  11. Mars surface radiation exposure for solar maximum conditions and 1989 solar proton events

    NASA Technical Reports Server (NTRS)

    Simonsen, Lisa C.; Nealy, John E.

    1992-01-01

    The Langley heavy-ion/nucleon transport code, HZETRN, and the high-energy nucleon transport code, BRYNTRN, are used to predict the propagation of galactic cosmic rays (GCR's) and solar flare protons through the carbon dioxide atmosphere of Mars. Particle fluences and the resulting doses are estimated on the surface of Mars for GCR's during solar maximum conditions and the Aug., Sep., and Oct. 1989 solar proton events. These results extend previously calculated surface estimates for GCR's at solar minimum conditions and the Feb. 1956, Nov. 1960, and Aug. 1972 solar proton events. Surface doses are estimated with both a low-density and a high-density carbon dioxide model of the atmosphere for altitudes of 0, 4, 8, and 12 km above the surface. A solar modulation function is incorporated to estimate the GCR dose variation between solar minimum and maximum conditions over the 11-year solar cycle. By using current Mars mission scenarios, doses to the skin, eye, and blood-forming organs are predicted for short- and long-duration stay times on the Martian surface throughout the solar cycle.

  12. Exposure of the hydrophobic components of porcine lung surfactant to oxidant stress alters surface tension properties.

    PubMed Central

    Gilliard, N; Heldt, G P; Loredo, J; Gasser, H; Redl, H; Merritt, T A; Spragg, R G

    1994-01-01

    We have tested the hypothesis that oxidation of lung surfactant results in loss of surface tension lowering function. Porcine lung surfactant was exposed to conditions known to cause lipid peroxidation (0.2 mM FeCl2 + 0.1 mM H2O2 or 5 microM CuCl2). Lipid peroxidation was verified by detection of conjugated dienes, thiobarbituric acid reactive substances, fluorescent products, hydroxy alkenals, and loss of unsaturated fatty acids. Exposed samples had significantly diminished surface tension lowering ability in vitro as measured in a bubble surfactometer. Samples exposed to FeCl2 + H2O2 had significantly diminished surface tension lowering ability in vivo as indicated by their reduced ability to improve lung compliance of surfactant-deficient fetal rabbits. Oxidation of phospholipid mixtures with surface tension lowering activity and containing unsaturated acyl groups resulted in partial loss of activity as determined in vitro. These results suggest that the effect of oxidants on lung surfactant function is due, in part, to effects on the phospholipid components and that acute pulmonary inflammation accompanied by oxygen radical production may result in surfactant lipid peroxidation and loss of surface tension lowering function. PMID:8200999

  13. In-Plane Shielding for CT: Effect of Off-Centering, Automatic Exposure Control and Shield-to-Surface Distance

    PubMed Central

    Dang, Pragya; Singh, Sarabjeet; Saini, Sanjay; Shepard, Jo-Anne O.

    2009-01-01

    Objective To assess effects of off-centering, automatic exposure control, and padding on attenuation values, noise, and radiation dose when using in-plane bismuth-based shields for CT scanning. Materials and Methods A 30 cm anthropomorphic chest phantom was scanned on a 64-multidetector CT, with the center of the phantom aligned to the gantry isocenter. Scanning was repeated after placing a bismuth breast shield on the anterior surface with no gap and with 1, 2, and 6 cm of padding between the shield and the phantom surface. The "shielded" phantom was also scanned with combined modulation and off-centering of the phantom at 2 cm, 4 cm and 6 cm below the gantry isocenter. CT numbers, noise, and surface radiation dose were measured. The data were analyzed using an analysis of variance. Results The in-plane shield was not associated with any significant increment for the surface dose or CT dose index volume, which was achieved by comparing the radiation dose measured by combined modulation technique to the fixed mAs (p > 0.05). Irrespective of the gap or the surface CT numbers, surface noise increased to a larger extent compared to Hounsfield unit (HU) (0-6 cm, 26-55%) and noise (0-6 cm, 30-40%) in the center. With off-centering, in-plane shielding devices are associated with less dose savings, although dose reduction was still higher than in the absence of shielding (0 cm off-center, 90% dose reduction; 2 cm, 61%) (p < 0.0001). Streak artifacts were noted at 0 cm and 1 cm gaps but not at 2 cm and 6 cm gaps of shielding to the surface distances. Conclusion In-plane shields are associated with greater image noise, artifactually increased attenuation values, and streak artifacts. However, shields reduce radiation dose regardless of the extent of off-centering. Automatic exposure control did not increase radiation dose when using a shield. PMID:19270862

  14. Colloidal stability of gold nanorod solution upon exposure to excised human skin: Effect of surface chemistry and protein adsorption.

    PubMed

    Mahmoud, Nouf N; Al-Qaoud, Khaled M; Al-Bakri, Amal G; Alkilany, Alaaldin M; Khalil, Enam A

    2016-06-01

    In this study, we evaluated the colloidal stability of gold nanorods (with positive, negative and neutral surface charge) in solution upon contact with excised human skin. UV-vis absorption, plasmon peak broadening index (PPBI%) and transmission electron microscope analysis were used to follow nanoparticles aggregation in solution. Our results show that positively charged gold nanorods aggregate extensively upon exposure to excised human skin compared to negatively and neutrally charged gold nanorods. Skin-induced aggregation of cationic gold nanorods was linked to the adsorption of proteins released from the dermis layer to the surface of gold nanorods. Protein adsorption significantly screen nanorod's effective surface charge and induce their aggregation. Moreover, we demonstrate that the presence of polyethylene glycol polymer on the surface of cationic gold nanorods minimize this aggregation significantly by providing steric repulsion (non-electrostatic stabilization mechanism). This work highlights the importance of evaluating the colloidal stability of nanoparticles in solution upon contact with skin, which is a "usually overlooked" parameter when studying the nanoparticle-skin interaction. PMID:26923289

  15. Species specificity, surface exposure, protein expression, immunogenicity, and participation in biofilm formation of Porphyromonas gingivalis HmuY

    PubMed Central

    2010-01-01

    Background Porphyromonas gingivalis is a major etiological agent of chronic periodontitis. The aim of this study was to examine the species specificity, surface exposure, protein expression, immunogenicity, and participation in biofilm formation of the P. gingivalis heme-binding protein HmuY. Results HmuY is a unique protein of P. gingivalis since only low amino-acid sequence homology has been found to proteins encoded in other species. It is exposed on the cell surface and highly abundant in the outer membrane of the cell, in outer-membrane vesicles, and is released into culture medium in a soluble form. The protein is produced constitutively at low levels in bacteria grown under high-iron/heme conditions and at higher levels in bacteria growing under the low-iron/heme conditions typical of dental plaque. HmuY is immunogenic and elicits high IgG antibody titers in rabbits. It is also engaged in homotypic biofilm formation by P. gingivalis. Anti-HmuY antibodies exhibit inhibitory activity against P. gingivalis growth and biofilm formation. Conclusions Here it is demonstrated that HmuY may play a significant role not only in heme acquisition, but also in biofilm accumulation on abiotic surfaces. The data also suggest that HmuY, as a surface-exposed protein, would be available for recognition by the immune response during chronic periodontitis and the production of anti-HmuY antibodies may inhibit biofilm formation. PMID:20438645

  16. Surface Exposure Ages of Space-Weathered Grains from Asteroid 25143 Itokawa

    NASA Technical Reports Server (NTRS)

    Keller, L. P.; Berger, E. L.; Christoffersen, R.

    2015-01-01

    Space weathering processes such as solar wind ion irradiation and micrometeorite impacts are widely known to alter the properties of regolith materials exposed on airless bodies. The rates of space weathering processes however, are poorly constrained for asteroid regoliths, with recent estimates ranging over many orders of magnitude. The return of surface samples by JAXA's Hayabusa mission to asteroid 25143 Itokawa, and their laboratory analysis provides "ground truth" to anchor the timescales for space weathering processes on airless bodies.

  17. Exposure of fibrinogen receptors in human platelets by surface proteolysis with elastase.

    PubMed Central

    Kornecki, E; Ehrlich, Y H; De Mars, D D; Lenox, R H

    1986-01-01

    Human platelets that were preincubated with porcine elastase aggregated spontaneously upon the addition of fibrinogen. Maximal aggregation to fibrinogen was observed with platelets pretreated with an elastase concentration of 111 micrograms/ml, and half-maximal aggregation occurred after treatment with 11 micrograms/ml elastase. Binding of radiolabeled fibrinogen to elastase-treated platelets was specific, saturable, and showed a single class of 48,400 +/- 9,697 fibrinogen-binding sites per platelet with a dissociation constant of 6.30 +/- 1.48 X 10(-7) M. ATP, apyrase, and the stimulators of platelet adenylate cyclase forskolin, prostaglandin E1, prostacyclin, and N6, 2'-O-dibutyryl cyclic AMP did not inhibit the fibrinogen-induced aggregation of elastase-treated platelets. EDTA completely blocked the initiation of aggregation and reversed the fibrinogen-induced aggregation of elastase-treated platelets. Monoclonal and polyclonal antibodies directed against glycoproteins (GP) IIb and IIIa completely blocked the fibrinogen-induced aggregation of elastase-treated platelets. Immunoprecipitates with these antibodies obtained from detergent extracts of surface-radiolabeled, intact, and elastase-treated platelets contained the glycoproteins IIb and IIIa. We conclude that surface proteolysis by low concentrations of elastase can expose fibrinogen-binding sites associated with GPIIb and GPIIIa on the platelet surface, resulting in spontaneous aggregation upon the addition of fibrinogen. These findings may be relevant to hemostatic changes observed in patients with increased levels of circulating elastase. Images PMID:3005363

  18. Dental ceramics coated with bioactive glass: Surface changes after exposure in a simulated body fluid under static and dynamic conditions

    NASA Astrophysics Data System (ADS)

    Papadopoulou, L.; Kontonasaki, E.; Zorba, T.; Chatzistavrou, X.; Pavlidou, E.; Paraskevopoulos, K.; Sklavounos, S.; Koidis, P.

    2003-07-01

    Bioactive materials develop a strong bond with living tissues through a carbonate-containing hydroxyapatite layer, similar to that of bone. The fabrication of a thin bioactive glass coating on dental ceramics used in metal-ceramic restorations, could provide a bioactive surface, which in combination with a tissue regenerative technique could lead to periodontal tissues attachment. The aim of this study was the in vitro investigation of the surface structure changes of dental ceramics used in metal-ceramic restorations, coated with a bioactive glass heat-treated at 950 °C, after exposure in a simulated body fluid (SBF) under two different soaking conditions. Coating of dental ceramics with a bioactive glass resulted in the formation of a stable and well bonded with the ceramic substrate thin layer. The growth of a well-attached carbonate apatite layer on their surface after immersion in a simulated body fluid is well evidenced under both experimental conditions, although in static environment the rate of apatite growth is constant and the grown layers seem to be more dense and compact compared with the respective layers observed on specimens under dynamic conditions.

  19. Influence of virtual height exposure on postural reactions to support surface translations.

    PubMed

    Cleworth, Taylor W; Chua, Romeo; Inglis, J Timothy; Carpenter, Mark G

    2016-06-01

    As fear of falling is related to the increased likelihood of falls, it is important to understand the effects of threat-related factors (fear, anxiety and confidence) on dynamic postural reactions. Previous studies designed to examine threat effects on dynamic postural reactions have methodological limitations and lack a comprehensive analysis of simultaneous kinetic, kinematic and electromyographical recordings. The current study addressed these limitations by examining postural reactions of 26 healthy young adults to unpredictable anterior-posterior support-surface translations (acceleration=0.6m/s(2), constant velocity=0.25m/s, total displacement=0.75m) while standing on a narrow virtual surface at Low (0.4cm) and High (3.2m) virtual heights. Standing at virtual height increased fear and anxiety, and decreased confidence. Prior to perturbations, threat led to increased tonic muscle activity in tibialis anterior, resulting in a higher co-contraction index between lower leg muscles. For backward perturbations, muscle activity in the lower leg and arm, and center of pressure peak displacements, were earlier and larger when standing at virtual height. In addition, arm flexion significantly increased while leg, trunk and center of mass displacements remained unchanged across heights. When controlling for leaning, threat-related factors can influence the neuro-mechanical responses to an unpredictable perturbation, causing specific characteristics of postural reactions to be facilitated in young adults when their balance is threatened. PMID:27264411

  20. Effects of artificial tears on rabbit ocular surface healing after exposure to benzalkonium chloride.

    PubMed

    Zhang, Yuqiu; Cao, Hong; Lin, Tong; Gong, Lan

    2016-10-01

    The aim of the study was to observe the effect of different artificial tears on healing the drug-induced keratopathy. To this aim, 64 rabbits received topical administration of 0.01% benzalkonium chloride to establish models and were divided into four groups. The control group received ocular saline solution (Saline), while the others were treated with Refresh Plus® (RF), Hycosan® (H) and Systane® Ultra (SU). Surface abnormalities were examined daily using slit-lamp. Fluorescein staining, histopathological and transmission electron microscopic (TEM) examination were performed at day 0, 2 weeks, and 1 and 2 months. A significant difference was observed between RF and SU, but not between H and SU at 2 weeks. TEM examination revealed new microvilli close to the cavity surface, and the number of microvilli in SU was greater than in H at 2 weeks and 1 month. Based on the results, the effect in the SU group was the most significant. Eye drops with nontoxic preservative such as SU are an alternative to treat drug-induced keratopathy. PMID:26890221

  1. Applications of Surface-Enhanced Raman Spectroscopy for the Study of Indicators of Exposure to Selected Genotoxins

    NASA Astrophysics Data System (ADS)

    Helmenstine, Anne Marie

    Surface-enhanced Raman scattering spectroscopy (SERS) was used to detect and analyze certain genotoxic chemicals, their metabolites, and selected deoxyribonucleic acid/ribonucleic acid (DNA/RNA) adducts that may be produced from exposure to specific toxins. Substances examined included nucleic acid (purine/pyrimidine) etheno adducts of adenine and cytosine and carcinogens benzo (a) pyrene and aflatoxins. SERS was shown to be an effective tool for sensitive, selective detection and analysis of these genotoxins and related substances. Detection was accomplished even at such low concentrations as might be present in biological systems, and in minute volumes of approximately one microliter per sample. Most substances were found to possess unique spectral signatures and could be distinguished from other chemicals in this study. The sample molecules were also analyzed in body fluids (e.g. plasma, serum, and urine) and adducted to DNA. In this study SERS was demonstrated to open a new dimension in chemical analysis not previously available by utilizing other spectroscopies or methods of chemical detection. Special attention was given to the various factors affecting the quality and reproducibility of a SERS spectrum, emphasizing the importance of optimization of Raman cross-scattering enhancement. Methods for adapting SERS to deal with specific research problems and for expanding the capabilities of SERS to address the health effects from human exposure to toxic pollutants were addressed in the concluding remarks section of this manuscript.

  2. An Innovative Approach for the Calculation of Exposure Point Concentrations for Large Areas of Surface Radionuclide Contamination

    SciTech Connect

    Winchester Chromec, F.; Myers, Jeffrey C.

    2008-01-15

    The Department of Energy Rocky Flats site was designated as a wildlife refuge by the Rocky Flats National Wildlife Refuge Act of 2001. Rocky Flats was considered to be one of the most highly contaminated radiological sites in the country. Some portions of the site have low-level radionuclide contamination in surface soils. A site-wide risk and dose assessment to evaluate threats to human health and the environment were performed, so that the site could be released for this land use. The aggressive accelerated action program combined with defensible and innovative risk assessment methods resulted in there being no radionuclides of concern in the final comprehensive risk assessment (DOE 2006). An innovative approach for delineating functional exposure areas and area-weighted exposure point concentration-activities (EPCs) was negotiated with the regulatory agencies in Colorado. This procedure leads to realistic estimates of risk and dose to workers and visitors. This innovative approach to the calculation of EPCs was negotiated with both State and Federal regulators. The value of developing and maintaining good working relationships with regulators responsible for a site can not be overestimated. The building of trust and confidence among responsible parties and regulators is essential for the development and implementation of innovative methods and technologies.

  3. Decreased blood hepatitis B surface antibody levels linked to e-waste lead exposure in preschool children.

    PubMed

    Xu, Xijin; Chen, Xiaojuan; Zhang, Jian; Guo, Pi; Fu, Tingzao; Dai, Yifeng; Lin, Stanley L; Huo, Xia

    2015-11-15

    Lead (Pb) is a widespread environmental contaminant that can profoundly affect the immune system in vaccinated children. To explore the association between blood Pb and HBsAb levels in children chronically exposed to Pb, we measured hepatitis B surface antibody (HBsAb) titers, to reflect the immune response in the children of Guiyu, an electronic and electrical waste (e-waste) recycling area well known for environmental Pb contamination. We performed secondary exploratory analyses of blood Pb levels and plasma HBsAb titers in samples, taken in two phases between 2011 and 2012, from 590 children from Guiyu (exposed group) and Haojiang (reference group). Children living in the exposed area had higher blood Pb levels and lower HBsAb titers compared with children from the reference area. At each phase, generalized linear mixed models (GLMMs) showed that HBsAb titers were significantly negatively associated with child blood Pb levels. This work shows that a decreased immune response to hepatitis B vaccine and immune system might have potential harm to children with chronic Pb exposure. Importantly, nearly 50% of chronically exposed children failed to develop sufficient immunity to hepatitis in response to vaccination. Thus different vaccination strategies are needed for children living under conditions of chronic Pb exposure. PMID:26022852

  4. Terrestrial cosmogenic nuclide surface exposure dating of the oldest glacial successions in the Himalayan orogen: Ladakh Range, northern India

    USGS Publications Warehouse

    Owen, L.A.; Caffee, M.W.; Bovard, K.R.; Finkel, R.C.; Sharma, M.C.

    2006-01-01

    Terrestrial cosmogenic nuclide surface exposure dating of moraine boulders and alluvial fan sediments define the timing of five glacial advances over at least the last five glacial cycles in the Ladakh Range of the Transhimalaya. The glacial stages that have been identified are: the Indus Valley glacial stage, dated at older than 430 ka; the Leh glacial stage occurring in the penultimate glacial cycle or older; the Karglacial stage, occurring during the early part of the last glacial cycle; the Bazgo glacial stage, at its maximum during the middle of the last glacial cycle; and the early Holocene Khalling glacial stage. The exposure ages of the Indus Valley moraines are the oldest observed to date throughout the Himalayan orogen. We observe a pattern of progressively more restricted glaciation during the last five glacial cycles, likely indicating a progressive reduction in the moisture supply necessary to sustain glaciation. A possible explanation is that uplift of Himalayan ranges to the south and/or of the Karakoram Mountains to the west of the region may have effectively blocked moisture supply by the south Asian summer monsoon and mid-latitude westerlies, respectively. Alternatively, this pattern of glaciation may reflect a trend of progressively less extensive glaciation in mountain regions that has been observed globally throughout the Pleistocene. ?? 2006 Geological Society of America.

  5. Single-exposure two-dimensional superresolution in digital holography using a vertical cavity surface-emitting laser source array.

    PubMed

    Granero, Luis; Zalevsky, Zeev; Micó, Vicente

    2011-04-01

    We present a new implementation capable of producing two-dimensional (2D) superresolution (SR) imaging in a single exposure by aperture synthesis in digital lensless Fourier holography when using angular multiplexing provided by a vertical cavity surface-emitting laser source array. The system performs the recording in a single CCD snapshot of a multiplexed hologram coming from the incoherent addition of multiple subholograms, where each contains information about a different 2D spatial frequency band of the object's spectrum. Thus, a set of nonoverlapping bandpass images of the input object can be recovered by Fourier transformation (FT) of the multiplexed hologram. The SR is obtained by coherent addition of the information contained in each bandpass image while generating an enlarged synthetic aperture. Experimental results demonstrate improvement in resolution and image quality. PMID:21479012

  6. Solar Particle Event Exposures and Local Tissue Environments in Free Space and on Martian Surface

    NASA Technical Reports Server (NTRS)

    Kim, M. Y.; Shinn, J. L.; Singleterry, R. C.; Atwell, W.; Wilson, J. W.

    1999-01-01

    Solar particle events (SPEs) are a concern to space missions outside Earth s geomagnetic field. The September 29, 1989 SPE is the largest ground-level event since February 23, 1956. It is an iron-rich event for which the spectra are well measured. Because ten times this event matches the ground level data of the February 1956 SPE, it is suggested that an event with ten-times the scaled spectra of the September 29, 1989 SPE be used as a worst case SPE for spacecraft design. For the worst case SPE, the input spectra were reconstructed using Nymmik's (1995) model for protons, the O and Fe ion spectra of Tylka et al. (1997) to evaluate the iron enhancement ratio, and the Solar Energetic Particle Baseline (SEPB) composition of McGuire et al. (1986) for the heavy ions. The necessary transport properties of the shielding materials and the astronaut s body tissues are evaluated using the HZETRN code. Three shield configurations (assumed to be aluminum) are considered: space suit taken as 0.3 g/sq cm, helmet/pressure vessel as 1 g/sq cm, and equipment room of 5 g/sq cm. A shelter is taken as 10 g/sq cm on the Martian surface. The effect of shielding due to the Martian atmosphere is included. The astronaut geometry is taken from the computerized anatomical man (CAM) model.

  7. Assessment of cell-surface exposure and vaccinogenic potentials of Treponema pallidum candidate outer membrane proteins

    PubMed Central

    Tomson, Farol L.; Conley, Patrick G.; Norgard, Michael V.; Hagman, Kayla E.

    2007-01-01

    Syphilis, a sexually transmitted infection caused by the spirochetal bacterium Treponema pallidum, remains a global public health problem. T. pallidum is believed to be an extracellular pathogen and, as such, the identification of T. pallidum outer membrane proteins that could serve as targets for opsonic or bactericidal antibodies has remained a high research priority for vaccine development. However, the identification of T. pallidum outer membrane proteins has remained highly elusive. Recent studies and bioinformatics have implicated four treponemal proteins as potential outer membrane proteins (TP0155, TP0326, TP0483 and TP0956). Indirect immunofluorescence assays performed on treponemes encapsulated within agarose gel microdroplets failed to provide evidence that any of these four molecules were surface-exposed in T. pallidum. Second, recombinant fusion proteins corresponding to all four candidate outer membrane proteins were used separately, or in combination, to vaccinate New Zealand White rabbits. Despite achieving high titers (>1:50,000) of serum antibodies, none of the rabbits displayed chancre immunity after intradermal challenge with viable T. pallidum. PMID:17890130

  8. Cholesterol Exposure at the Membrane Surface Is Necessary and Sufficient to Trigger Perfringolysin O Binding†

    PubMed Central

    Flanagan, John J.; Tweten, Rodney K.; Johnson, Arthur E.; Heuck, Alejandro P.

    2010-01-01

    Perfringolysin O (PFO) is the prototype for the cholesterol-dependent cytolysins, a family of bacterial pore-forming toxins that act on eukaryotic membranes. The pore-forming mechanism of PFO exhibits an absolute requirement for membrane cholesterol, but the complex interplay between the structural arrangement of the PFO C-terminal domain and the distribution of cholesterol in the target membrane is poorly understood. Herein we show that PFO binding to the bilayer and the initiation of the sequence of events that culminate in the formation of a transmembrane pore depend on the availability of free cholesterol at the membrane surface, while changes in the acyl chain packing of the phospholipids and cholesterol in the membrane core, or the presence or absence of detergent-resistant domains do not correlate with PFO binding. Moreover, PFO association with the membrane was inhibited by the addition of sphingomyelin, a typical component of membrane rafts in cell membranes. Finally, addition of molecules that do not interact with PFO, but intercalate into the membrane and displace cholesterol from its association with phospholipids (e.g., epicholesterol), reduced the amount of cholesterol required to trigger PFO binding. Taken together, our studies reveal that PFO binding to membranes is triggered when the concentration of cholesterol exceeds the association capacity of the phospholipids, and this cholesterol excess is then free to associate with the toxin. PMID:19292457

  9. Assessment of DNA damages caused by exposure of bacterial cells and spores to the Mars surface environment

    NASA Astrophysics Data System (ADS)

    Fajardo-Cavazos, Patricia; Schuerger, Andrew; Robles-Martinez, Jose; Douki, Thierry; Nicholson, Wayne

    Joint NASA and ESA missions are planned for the next decade to investigate the possibility of present or past life on Mars [1]. Evidence of extraterrestrial life will likely rely on the de-tection of biomarkers, highlighting the importance of preventing forward contamination not only with viable microorganisms, but also with biomolecules that could compromise the valid-ity of life-detection experiments [2-4]. The designation of DNA as a high-priority biomarker makes it necessary to evaluate its persistence in extraterrestrial environments, and the effects of exposure on its biological activity. To accomplish this, we deposited naked DNA, cells and spores of Bacillus subtilis 168 or B. pumilus SAFR-032, or cells of Acinetobacter radioresistens 50v1 onto spacecraft-qualified aluminum coupons. Samples were exposed to a simulated Mars surface environment as described in detail previously [4, 5] for various periods of time, and DNA damage was assessed by a number of measurements. Double-and single-strand breaks were measured by neutral and alkaline agarose gel electrophoresis, and DNA bipyrimidine pho-toproducts were measured by HPLC-mass spectrometry, as described previously [6, 7]. Loss of functionality of DNA to serve as a template for replication by DNA polymerase was measured using a quantitative polymerase chain reaction (qPCR) assay [8]. In all cases, DNA damage was directly correlated with time of exposure to simulated martian solar radiation (UV, visible, and infrared wavelengths). Exposure of samples to Mars surface conditions, but shielded from solar radiation, did not result in appreciable damage over the time periods tested, relative to controls. DNA contained within cells or spores was much less susceptible to damage than was naked DNA. Using the qPCR assay, we found that inactivation of naked DNA or DNA extracted from exposed spores of B. subtilis followed a multiphasic dose-response, and that a fraction of DNA molecules retained functionality after

  10. Nano-scale topography of bearing surface in advanced alumina/zirconia hip joint before and after severe exposure in water vapor environment.

    PubMed

    Pezzotti, Giuseppe; Saito, Takuma; Padeletti, Giuseppina; Cossari, Pierluigi; Yamamoto, Kengo

    2010-06-01

    The aim of this study was to perform a surface morphology assessment with nanometer scale resolution on femoral heads made of an advanced zirconia toughened alumina (ZTA) composite. Femoral heads were characterized to a degree of statistical accuracy in the as-received state and after exposures up to 100 h in severe vapor-moist environment. Surface screening was made using an atomic force microscope (AFM). Scanning was systematically repeated on portions of surface as large as several tens of micrometers, randomly selected on the head surface, to achieve sufficient statistical reliability without lowering the nanometer-scale spatial resolution of the roughness measurement. No significant difference was found in the recorded values of surface roughness after environmental exposure (at 134 degrees C, under 2 bar), which was always comparable to that of the as-received head. Surface roughness safely lay <10 nm after environmental exposures up to 100 h, which corresponded to an exposure time in vivo of several human lifetimes (i.e., according to an experimentally derived thermal activation energy). In addition, the roughness results were significantly (about one order of magnitude) lower as compared to those recorded on femoral heads made of monolithic zirconia tested under the same conditions. PMID:20058275

  11. Ion Mobility Spectrometry-Hydrogen Deuterium Exchange Mass Spectrometry of Anions: Part 3. Estimating Surface Area Exposure by Deuterium Uptake.

    PubMed

    Khakinejad, Mahdiar; Kondalaji, Samaneh Ghassabi; Donohoe, Gregory C; Valentine, Stephen J

    2016-03-01

    Gas-phase hydrogen deuterium exchange (HDX), collision cross section (CCS) measurement, and molecular dynamics simulation (MDS) techniques were utilized to develop and compare three methods for estimating the relative surface area exposure of separate peptide chains within bovine insulin ions. Electrosprayed [M - 3H](3-) and [M - 5H](5-) insulin ions produced a single conformer type with respective collision cross sections of 528 ± 5 Å(2) and 808 ± 2 Å(2). [M - 4H](4-) ions were comprised of more compact (Ω = 676 ± 3 Å(2)) and diffuse (i.e., more elongated, Ω = 779 ± 3 Å(2)) ion conformer types. Ions were subjected to HDX in the drift tube using D2O as the reagent gas. Collision-induced dissociation was used to fragment mobility-selected, isotopically labeled [M - 4H](4-) and [M - 5H](5-) ions into the protein subchains. Deuterium uptake levels of each chain can be explained by limited inter-chain isotopic scrambling upon collisional activation. Using nominal ion structures from MDS and a hydrogen accessibility model, the deuterium uptake for each chain was correlated to its exposed surface area. In separate experiments, the per-residue deuterium content for the protonated and deprotonated ions of the synthetic peptide KKDDDDDIIKIIK were compared. The differences in deuterium content indicated the regional HDX accessibility for cations versus anions. Using ions of similar conformational type, this comparison highlights the complementary nature of HDX data obtained from positive- and negative-ion analysis. PMID:26620531

  12. Ion Mobility Spectrometry-Hydrogen Deuterium Exchange Mass Spectrometry of Anions: Part 3. Estimating Surface Area Exposure by Deuterium Uptake

    NASA Astrophysics Data System (ADS)

    Khakinejad, Mahdiar; Ghassabi Kondalaji, Samaneh; Donohoe, Gregory C.; Valentine, Stephen J.

    2016-03-01

    Gas-phase hydrogen deuterium exchange (HDX), collision cross section (CCS) measurement, and molecular dynamics simulation (MDS) techniques were utilized to develop and compare three methods for estimating the relative surface area exposure of separate peptide chains within bovine insulin ions. Electrosprayed [M - 3H]3- and [M - 5H]5- insulin ions produced a single conformer type with respective collision cross sections of 528 ± 5 Å2 and 808 ± 2 Å2. [M - 4H]4- ions were comprised of more compact (Ω = 676 ± 3 Å2) and diffuse (i.e., more elongated, Ω = 779 ± 3 Å2) ion conformer types. Ions were subjected to HDX in the drift tube using D2O as the reagent gas. Collision-induced dissociation was used to fragment mobility-selected, isotopically labeled [M - 4H]4- and [M - 5H]5- ions into the protein subchains. Deuterium uptake levels of each chain can be explained by limited inter-chain isotopic scrambling upon collisional activation. Using nominal ion structures from MDS and a hydrogen accessibility model, the deuterium uptake for each chain was correlated to its exposed surface area. In separate experiments, the per-residue deuterium content for the protonated and deprotonated ions of the synthetic peptide KKDDDDDIIKIIK were compared. The differences in deuterium content indicated the regional HDX accessibility for cations versus anions. Using ions of similar conformational type, this comparison highlights the complementary nature of HDX data obtained from positive- and negative-ion analysis.

  13. CERAMIDE AND SPHINGOSINE-1-PHOSPHATE ACT AS PHOTODYNAMIC THERAPY-ELICITED DAMAGE-ASSOCIATED MOLECULAR PATTERNS: CELL SURFACE EXPOSURE

    PubMed Central

    Korbelik, Mladen; Banáth, Judit; Sun, Jinghai; Canals, Daniel; Hannun, Yusuf A.; Separovic, Duska

    2014-01-01

    Molecules that appear on the surface of tumor cells after their therapy treatment may have important roles either as damage-associated molecular patterns (DAMPs) or signals for phagocytes influencing the disposal of these cells. Treatment of SCCVII and CAL27 cells, models of mouse and human squamous cell carcinoma respectively, by photodynamic therapy (PDT) resulted in the presentation of ceramide and sphingosine-1-phposphate (S1P) on the cell surface. This was documented by anti-ceramide and anti-S1P antibody staining followed by flow cytometry. The exposure of these key sphingolipid molecules on PDT-treated tumor cells was PDT dose-dependent and it varied in intensity with different photosensitizers used for PDT. The above results, together with the finding that both ceramide and S1P can activate NFκB signaling in macrophages co-incubated with PDT-treated tumor cells, establish that these two sphingolipids can act as DAMPs stimulating inflammatory/immune reactions critical for tumor therapy response. PMID:24713544

  14. Pseudomonas aeruginosa biofilm formation and UV/irradiation exposure change surface and chemical structures of Pre-Production Resin Pellets

    NASA Astrophysics Data System (ADS)

    Stam, C. N.; Neal, A.; Park, S.; Mielke, R.; Tsapin, A. I.; Bhartia, R.; Salas, E.; Hug, W.; Behar, A. E.; Nadeau, J. L.

    2011-12-01

    Microbial interactions with synthetic polymers in open ocean is poorly understood. Plastics are a major and persistent contaminant of ocean waters. Many of these plastics are contaminated with toxic and synthetic chemicals that persist in the environment with minimal degradation. The purpose of this study is to look at the effects that microbial biofilm communities have on both surface and chemical structures of pre-production resin pellets (PRPs). Pseudomonas aeruignosa was grown with PRPs under multiple growth and nutrient conditions. These conditions were combined with varying lengths of UV exposures common to ocean environments. Material degradation of the PRPs and the changing surface and chemical structures of these synthetic polymers was evaluated using a combination of Fourier transform infrared spectroscopy, environmental scanning electron microscopy, scanning transmission electron microscopy, X-ray microtomography, and ArcGIS mapping. This study correlates with previous studies conducted on environmental PRP's , collected on the 2009 Project Kaisei expedition in the Subtropical Convergence Zone of the North Pacific Gyre. Further studies are needed to develop a full understanding of degradation rates of synthetic polymers in oceanic environments.

  15. Climate-induced changes in sediment supply revealed by surface exposure dating of Sijiquan River terraces, northeastern Tibet

    NASA Astrophysics Data System (ADS)

    Shirahama, Yoshiki; Miyairi, Yosuke; He, Honglin; Fu, Bihong; Echigo, Tomoo; Kano, Ken'ichi; Yokoyama, Yusuke; Ikeda, Yasutaka

    2015-04-01

    In this paper, we report cosmogenic isotope evidence for dramatic changes in sediment supply during glacial-interglacial climatic cycles in the Late Quaternary. Previous work on fluvio-glacial processes in cold environments has qualitatively revealed that significant increases in debris production occurred in glacial periods, due typically to accelerated glacial and periglacial processes on high-relief slopes, resulting in river aggradation (accumulation) in the drainage. In interglacial periods, rivers behave in the opposite way, forming incised valleys. However, little has been studied on climatically controlled production-and-reworking processes with radiometric evidence. The evidence presented here is from the northeastern margin of the Tibetan Plateau, where lateral growth of the plateau is now ongoing. Reconstructions of fluvial response to Quaternary glacial fluctuations are crucial also to better understand the active tectonic process in the region using geomorphological information. The Sijiquan River drainage basin on the north of the East Kunlun Mountains was investigated. Detailed geomorphological mapping of fluvio-glacial landforms indicates two phases of aggradation, each of which was followed by valley incision. 10Be and 26Al concentrations in fluvial terrace deposits suggest that these two aggradational phases correspond most likely to the penultimate and last glacial periods, assuming a low rate of surface erosion on the terraces and zero inherited concentration. On the other hand, present-day river gravel has higher concentrations in amalgamated samples of 10Be and 26Al than the terrace deposits. Surface-exposure and burial analyses based on grain-by-grain measurements of both 10Be and 26Al indicate that the present-day river gravel consists mostly of reworked grains from terrace deposits and underlying fluvio-lacustrine rocks in the drainage basin. It is concluded that significant changes in clastic sediment supply occur in cold environments in

  16. Transfer of contaminants from surface to hands: experimental assessment of linearity of the exposure process, adherence to the skin, and area exposed during fixed pressure and repeated contact with surfaces contaminated with a powder.

    PubMed

    Brouwer, D H; Kroese, R; Van Hemmen, J J

    1999-04-01

    Estimation of dermal exposure in the workplace resulting from contact with contaminated surfaces is important in risk assessment. Models have been developed to describe the process of exposure due to transfer, but for major input parameters--that is, contact area surface and adherence--defaults are used. This study examines the effect of one single-hand press contact and repeated contacts with a contaminated glass plate on both skin area exposed and loading of the skin for three volunteers. A fluorescent whitening agent was used to study the process of exposure and to determine the increase of the area exposed as well as the adherence of the compound to the skin surface after 1 to 12 consecutive contacts by a video imaging technique. In addition, loading of the skin after 12 contacts was compared to loading of a cotton glove monitor with similar hand pressures. The results show that after one single-hand contact only 4 to 16 percent of the total surface of the palm of the hand was exposed, whereas after 12 contacts this was increased to about 40 percent. The efficiency of transfer was < or = 2 percent of the contamination of the surface. The adherence to the skin was 1.07 micrograms/cm2 after 12 contacts and tended to increase non-linearly with increase in contacts. Because defaults of adherence for use in exposure models are generally a factor 500 to 5,000 higher, and the area exposed is assumed to be the total surface of the hand, overestimation of dermal exposure due to a single hand-surface contact in workplaces may occur. Therefore, additional studies on multi-contact exposure scenarios are indicated to adjust defaults for hand-surface transfer processes. PMID:10457645

  17. Precise Surface Exposure Dating of Early Holocene and Little Ice Age Moraines in the Cordillera Vilcabamba of Southern Peru

    NASA Astrophysics Data System (ADS)

    Licciardi, J. M.; Schaefer, J. M.; Lund, D. C.; Taggart, J. R.

    2008-12-01

    We have established precise ages of two glacial events in the tropical Andean highlands of southern Peru. The field site is located on the flanks of Nevado Salcantay (6271 m asl; 13°20'S latitude), the highest peak in the Cordillera Vilcabamba. A two-fold sequence of nested lateral and end moraines was mapped in a glacial trough emanating from the south face of Salcantay. Well-defined outer and inner moraines were deposited by valley glaciers that terminated 5 km and 3 km, respectively, from their head on the Salcantay massif. Cosmogenic 10Be surface exposure dating of boulders on the outer (n = 7) and inner (n = 7) moraine crests expands upon initial age control for these deposits and improves substantially on the precision of earlier 10Be measurements. The new results yield mean ages of 9.0 ± 0.3 ka for the outer moraine and 195 ± 24 years for the inner moraine, corresponding to glacial events during the early and latest Holocene. These ages are derived using the CRONUS-Earth 10Be exposure age calculator with Lal-Stone production rate scaling and the default height-pressure relationship. The inner moraine age correlates with the timing of the Little Ice Age as defined from northern mid- and high latitude records, and indicates considerable expansion of glaciers heading on Nevado Salcantay during this climatic minimum. Recent geomorphic mapping has identified similar sequences of moraines in adjacent drainages on and near Salcantay, suggesting a broader regional signal of two prominent Holocene glacial events in this segment of the southern Peruvian Andes; 10Be dating of these additional moraines is underway. Our new glacier chronologies complement ice core and lacustrine paleoclimate records in the vicinity, thereby increasing spatial and temporal coverage for identifying patterns of climate change in the tropical Andes during the Holocene. Apart from their paleoclimatic significance, the results also demonstrate a newly- developed capability of 10Be exposure

  18. Timing of late Pleistocene glaciation in Mongolia: Surface exposure dating reveals a differentiated pattern of glacial forcing

    NASA Astrophysics Data System (ADS)

    Pötsch, Steffen; Rother, Henrik; Lorenz, Sebastian; Walther, Michael; Lehmkuhl, Frank

    2015-04-01

    The focus of this study is on the geochronological and paleoclimatic characterization of Pleistocene glaciation in central (Khangai Mountains) and western (Turgen Mountains, Mongolian Altai) Mongolia. These two mountain ranges form a 700 km long SE-NW transect through Mongolia and allow assumptions of the temporal and causal dynamics of regional glaciation and their correlation to other mountain glacier records from Central and High Asia. In order to evaluate the Pleistocene glaciations in Mongolia we undertook geomorphological mapping and cosmogenic radionuclide (CRN) surface exposure dating (10Be) in four valley systems located in the Khangai Mountains and Turgen Mountains. In total 46 glacial boulders and roche moutonnées were sampled, prepared and AMS measured to determine their 10Be surface exposure ages. Of these, 26 samples were obtained from the Khangai Mountains (three separate moraine sequences) and 20 samples were taken from the Turgen Mountains (one moraine sequence). Our results give evidence of major ice advances during early MIS-4 (74-71 ka) and MIS-2 (25-20 and 18- 17 ka) in both mountain ranges. However, in the Khangai Mountains of central Mongolia very significant ice advances also occurred during MIS-3 (37-32 ka), which exceeded the ice limits set during the MIS-2 glaciation. These results show that climatic conditions during phases of insolation minima characterized by extremely cold and dry conditions (MIS-4 and MIS-2) produced a favorable setting for major ice expansion in Mongolia. Yet, glacial accumulation in the Khangai Mountains also increased substantially in response to the cool-wet conditions of MIS-3, associated with a possibly greater-than-today input from winter precipitation. These records indicate that in addition to the thermally induced glaciations of MIS-4 and MIS-2, variations in atmospheric moisture supply are also capable of triggering large ice advances as observed during MIS-3. Taken together, this suggests that the role

  19. Examination of surface exposure age of Antarctic moraines using in situ produced [sup 10]Be and [sup 26]Al

    SciTech Connect

    Brown, E.T.; Edmond, J.M. ); Raisbeck, G.M.; Yiou, F. ); Kurz, M.D.; Brook, E.J. )

    1991-08-01

    Concentrations of [sup 10]Be (t[sub 1/2] = 1.5 [times] 10[sup 6]y) and [sup 26]Al (t[sub 1/2] = 0.72 [times] 10[sup 6]y) have been determined by accelerator mass spectrometry (AMS) in a suite of quartz samples taken from sandstone boulders in several moraines in Arena Valley, a dry valley adjacent to the Taylor Glacier in the Quatermain Mountains, Southern Victoria Land, East Antarctica. These isotopes are produced in surficial quartz by cosmic ray spallation of O and Si. The concentrations in these samples ranged from 6.1 [times] 10[sup 5] to 3.0 [times] 10[sup 7] at g[sup [minus]1] for [sup 10]Be and from 9.4 [times] 10[sup 6] to 1.2 [times] 10[sup 8] at g[sup [minus]1] for [sup 26]Al, depending upon the extent of exposure at the surface. Production rates of 17[sub [minus]4][sup +16] at g[sup [minus]1]y[sup [minus]1] for [sup 10]Be and 113[sub [minus]16][sup +54] at g[sup [minus]1]y[sup [minus]1] for [sup 26]Al at 1300 m and 87[degree]S and a [sup 26]Al:[sup 10]Be production ratio of 6.5[sub [minus]1.3][sup +1.3] were calculated from the data. These values correspond to sea-level production rates at high geomagnetic latitude of 6.4 at g[sup [minus]1]y[sup [minus]1] and 41.7 at g[sup [minus]1]y[sup [minus]1] for [sup 10]Be and [sup 26]Al, respectively, consistent with determinations based on [approximately]11 Ky glacially polished surfaces in the Sierra Nevada in California. These production rates imply exposure ages for the various moraines ranging from 50 Ky to 2.5 My, in accordance with other geological evidence. The [sup 10]Be and [sup 26]Al ages of these rocks compare favorably with those found using a similar dating method based on in situ production of [sup 3]He.

  20. Effects of Ambient High Temperature Exposure on Alumina-Titania High Emittance Surfaces for Solar Dynamic Systems

    NASA Technical Reports Server (NTRS)

    deGroh, Kim K.; Smith, Daniela C.; Wheeler, Donald R.; MacLachlam, Brian J.

    1998-01-01

    Solar dynamic (SD) space power systems require durable, high emittance surfaces on a number of critical components, such as heat receiver interior surfaces and parasitic load radiator (PLR) elements. To enhance surface characteristics, an alumina-titania coating has been applied to 500 heat receiver thermal energy containment canisters and the PLR of NASA Lewis Research Center's (LeRC) 2 kW SD ground test demonstrator (GTD). The alumina-titania coating was chosen because it had been found to maintain its high emittance under vacuum (less than or equal to 10(exp -6) torr) at high temperatures (1457 F (827 C)) for an extended period (approximately 2,700 hours). However, preflight verification of SD systems components, such as the PLR require operation at ambient pressure and high temperatures. Therefore, the purpose of this research was to evaluate the durability of the alumina-titania coating at high temperature in air. Fifteen of sixteen alumina-titania coated Incoloy samples were exposed to high temperatures (600 F (316 C) to l500 F (816 C)) for various durations (2 to 32 hours). Samples, were characterized prior to and after heat treatment for reflectance, solar absorptance, room temperature emittance and emittance at 1,200 F (649 C). Samples were also examined to detect physical defects and to determine surface chemistry using optical microscopy, scanning electron microscopy operated with an energy dispersive spectroscopy (EDS) system, and x ray photoelectron spectroscopy (XPS). Visual examination of the heat-treated samples showed a whitening of samples exposed to temperatures of 1,000 F (538 C) and above. Correspondingly, the optical properties of these samples had degraded. A sample exposed to 1,500 F (816 C) for 24 hours had whitened and the thermal emittance at 1,200 F (649 C) had decreased from the non-heat treated value of 0.94 to 0.62. The coating on this sample had become embrittled with spalling off the substrate noticeable at several locations. Based

  1. Analysis of the French insurance market exposure to floods: a stochastic model combining river overflow and surface runoff

    NASA Astrophysics Data System (ADS)

    Moncoulon, D.; Labat, D.; Ardon, J.; Leblois, E.; Onfroy, T.; Poulard, C.; Aji, S.; Rémy, A.; Quantin, A.

    2014-09-01

    The analysis of flood exposure at a national scale for the French insurance market must combine the generation of a probabilistic event set of all possible (but which have not yet occurred) flood situations with hazard and damage modeling. In this study, hazard and damage models are calibrated on a 1995-2010 historical event set, both for hazard results (river flow, flooded areas) and loss estimations. Thus, uncertainties in the deterministic estimation of a single event loss are known before simulating a probabilistic event set. To take into account at least 90 % of the insured flood losses, the probabilistic event set must combine the river overflow (small and large catchments) with the surface runoff, due to heavy rainfall, on the slopes of the watershed. Indeed, internal studies of the CCR (Caisse Centrale de Reassurance) claim database have shown that approximately 45 % of the insured flood losses are located inside the floodplains and 45 % outside. Another 10 % is due to sea surge floods and groundwater rise. In this approach, two independent probabilistic methods are combined to create a single flood loss distribution: a generation of fictive river flows based on the historical records of the river gauge network and a generation of fictive rain fields on small catchments, calibrated on the 1958-2010 Météo-France rain database SAFRAN. All the events in the probabilistic event sets are simulated with the deterministic model. This hazard and damage distribution is used to simulate the flood losses at the national scale for an insurance company (Macif) and to generate flood areas associated with hazard return periods. The flood maps concern river overflow and surface water runoff. Validation of these maps is conducted by comparison with the address located claim data on a small catchment (downstream Argens).

  2. Analysis of the French insurance market exposure to floods: a stochastic model combining river overflow and surface runoff

    NASA Astrophysics Data System (ADS)

    Moncoulon, D.; Labat, D.; Ardon, J.; Onfroy, T.; Leblois, E.; Poulard, C.; Aji, S.; Rémy, A.; Quantin, A.

    2013-07-01

    The analysis of flood exposure at a national scale for the French insurance market must combine the generation of a probabilistic event set of all possible but not yet occurred flood situations with hazard and damage modeling. In this study, hazard and damage models are calibrated on a 1995-2012 historical event set, both for hazard results (river flow, flooded areas) and loss estimations. Thus, uncertainties in the deterministic estimation of a single event loss are known before simulating a probabilistic event set. To take into account at least 90% of the insured flood losses, the probabilistic event set must combine the river overflow (small and large catchments) with the surface runoff due to heavy rainfall, on the slopes of the watershed. Indeed, internal studies of CCR claim database has shown that approximately 45% of the insured flood losses are located inside the floodplains and 45% outside. 10% other percent are due to seasurge floods and groundwater rise. In this approach, two independent probabilistic methods are combined to create a single flood loss distribution: generation of fictive river flows based on the historical records of the river gauge network and generation of fictive rain fields on small catchments, calibrated on the 1958-2010 Météo-France rain database SAFRAN. All the events in the probabilistic event sets are simulated with the deterministic model. This hazard and damage distribution is used to simulate the flood losses at the national scale for an insurance company (MACIF) and to generate flood areas associated with hazard return periods. The flood maps concern river overflow and surface water runoff. Validation of these maps is conducted by comparison with the address located claim data on a small catchment (downstream Argens).

  3. Deuterium retention and morphological modifications of the surface in five grades of tungsten after deuterium plasma exposure

    NASA Astrophysics Data System (ADS)

    Balden, M.; Manhard, A.; Elgeti, S.

    2014-09-01

    Five tungsten (W) grades were simultaneously exposed to deuterium (D) plasma with 1020 D/(m2 s) of 38 eV/D up to 1026 D/m2 at 500 K specimen temperature. The D inventories and their depth profiles within the topmost 12 μm were determined by nuclear reaction analysis (D(3He, p)α). Morphological modifications at and below the surface were analysed by confocal laser scanning microscopy and scanning electron microscopy assisted by focused ion beam cross-sectioning. The observed variation of the D inventory by more than one order of magnitude (0.5-15 × 1020 D/m2) is attributed only to the different properties of each W grade. Spherical blisters and stepped flat-topped extrusions are observed depending on the W grade. These modifications are interpreted as an indication for hydrogen loading-induced damaging. The exposure conditions and W grades were chosen to allow a comparison between published data sets.

  4. Results of the Komplast experiment on the long-term exposure of materials specimens on the ISS surface

    NASA Astrophysics Data System (ADS)

    Shumov, A. E.; Novikov, L. S.; Shaevich, S. K.; Aleksandrov, N. G.; Smirnova, T. N.; Nikishin, E. F.; Chernik, V. N.; Petukhov, V. P.; Voronina, E. N.; Sedov, V. V.; Salnikova, I. A.; Babaevskiy, P. G.; Kozlov, N. A.; Deev, I. S.; Startsev, O. V.; Shindo, D. J.; Golden, J. L.; Kravchenko, M.

    2015-11-01

    The Komplast materials experiment was designed by Khrunichev State Research and Production Space Center together with Skobeltsyn Institute of Nuclear Physics, Lomonosov Moscow State University and other Russian scientific institutes, and has been carried out by Mission Control Moscow since 1998. The purpose of this experiment is to study the complex effect of the low Earth orbit environment on samples of various spacecraft materials. On November 20, 1998 the Komplast experiment began with the launch of the first International Space Station module Zarya, or Functional Cargo Block (FGB). Eight Komplast panels with samples of materials and sensors were installed on the outer surface of FGB module. Two of eight experiment panels were retrieved during Russian extravehicular activity in February 2011 after 12 years of space exposure and were subsequently returned to Earth by Space Shuttle "Discovery" on the STS-133/ULF-5 mission in March 2011. The article presents the results obtained from this unique long-duration experiment on board of the International Space Station.

  5. Preliminary Cosmogenic Surface Exposure Ages on Laurentide Ice-sheet Retreat and Opening of the Eastern Lake Agassiz Outlets

    NASA Astrophysics Data System (ADS)

    Leydet, D.; Carlson, A. E.; Sinclair, G.; Teller, J. T.; Breckenridge, A. J.; Caffee, M. W.; Barth, A. M.

    2015-12-01

    The chronology for the eastern outlets of glacial Lake Agassiz holds important consequences for the cause of Younger Dryas cold event during the last deglaciation. Eastward routing of Lake Agassiz runoff was originally hypothesized to have triggered the Younger Dryas. However, currently the chronology of the eastern outlets is only constrained by minimum-limiting radiocarbon ages that could suggest the eastern outlets were still ice covered at the start of the Younger Dryas at ~12.9 ka BP, requiring a different forcing of this abrupt climate event. Nevertheless, the oldest radiocarbon ages are still consistent with an ice-free eastern outlet at the start of the Younger Dryas. Here we will present preliminary 10-Be cosmogenic surface exposure ages from the North Lake, Flat Rock Lake, glacial Lake Kaministiquia, and Lake Nipigon outlets located near Thunder Bay, Ontario. These ages will date the timing of the deglaciation of the Laurentide ice sheet in the eastern outlet region of glacial Lake Agassiz. This will provide an important constraint for the hypothesized freshwater forcing of the cause of Younger Dryas cold event.

  6. Detailed diesel exhaust characteristics including particle surface area and lung deposited dose for better understanding of health effects in human chamber exposure studies

    NASA Astrophysics Data System (ADS)

    Wierzbicka, Aneta; Nilsson, Patrik T.; Rissler, Jenny; Sallsten, Gerd; Xu, Yiyi; Pagels, Joakim H.; Albin, Maria; Österberg, Kai; Strandberg, Bo; Eriksson, Axel; Bohgard, Mats; Bergemalm-Rynell, Kerstin; Gudmundsson, Anders

    2014-04-01

    Several diesel exhaust (DE) characteristics, comprising both particle and gas phase, recognized as important when linking with health effects, are not reported in human chamber exposure studies. In order to understand effects of DE on humans there is a need for better characterization of DE when performing exposure studies. The aim of this study was to determine and quantify detailed DE characteristics during human chamber exposure. Additionally to compare to reported DE properties in conducted human exposures. A wide battery of particle and gas phase measurement techniques have been used to provide detailed DE characteristics including the DE particles (DEP) surface area, fraction and dose deposited in the lungs, chemical composition of both particle and gas phase such as NO, NO2, CO, CO2, volatile organic compounds (including aldehydes, benzene, toluene) and polycyclic aromatic hydrocarbons (PAHs). Eyes, nose and throat irritation effects were determined. Exposure conditions with PM1 (<1 μm) mass concentration 280 μg m-3, number concentration 4 × 105 cm-3 and elemental to total carbon fraction of 82% were generated from a diesel vehicle at idling. When estimating the lung deposited dose it was found that using the size dependent effective density (in contrast to assuming unity density) reduced the estimated respiratory dose by 132% by mass. Accounting for agglomerated structure of DEP prevented underestimation of lung deposited dose by surface area by 37% in comparison to assuming spherical particles. Comparison of DE characteristics reported in conducted chamber exposures showed that DE properties vary to a great extent under the same DEP mass concentration and engine load. This highlights the need for detailed and standardized approach for measuring and reporting of DE properties. Eyes irritation effects, most probably caused by aldehydes in the gas phase, as well as nose irritation were observed at exposure levels below current occupational exposure limit

  7. A new method for estimating bedrock surface exposure ages and long-term erosion rates using a single in situ-produced cosmogenic radionuclide

    SciTech Connect

    Lifton, N.A.; Jull, A.J.T. . Dept. of Geosciences)

    1993-04-01

    Numerous ambiguities, limitations and uncertainties in geomorphic research have resulted from a historical inability to reliably and quantitatively estimate (1) the age of exposure of a geomorphic surface, and (2) spatial variability of long-term erosion rates. Radioactive and stable nuclides produced in situ by cosmic ray bombardment of rock materials exposed at the earth's surface may enable one to estimate surface exposure ages and long-term erosion rates directly. Recent development of techniques for measuring and interpreting concentrations of these nuclides may ultimately help to resolve many long-standing geomorphic debates. Cosmogenic radionuclide pairs such as [sup 10]Be and [sup 26]Al have been used most frequently to solve the governing equations for both erosion rates and surface exposure ages. However, the applicability of these techniques to geomorphic problems has been limited to some extent by the number of assumptions which had to be made to interpret the measured concentrations -- particularly those pertaining to steady-state or non-steady-state erosion conditions. The authors are developing a new method for interpreting the depth distribution of a single cosmogenic radionuclide in bedrock which avoids the need for many of these assumptions. Monte Carlo techniques are used to explore the range of erosion rate and exposure age conditions on a grid which would produce theoretical depth distributions of the radionuclide consistent with the measured depth profile. They plan to present new cosmogenic [sup 14]C data to corroborate the model results. Although unanswered questions and potential problems remain, this method appears to hold great promise for unraveling spatial variation in both erosion rates and exposure ages of a wide range of bedrock surfaces.

  8. Effectiveness of dust control methods for crystalline silica and respirable suspended particulate matter exposure during manual concrete surface grinding.

    PubMed

    Akbar-Khanzadeh, Farhang; Milz, Sheryl A; Wagner, Cynthia D; Bisesi, Michael S; Ames, April L; Khuder, Sadik; Susi, Pam; Akbar-Khanzadeh, Mahboubeh

    2010-12-01

    Concrete grinding exposes workers to unacceptable levels of crystalline silica dust, known to cause diseases such as silicosis and possibly lung cancer. This study examined the influence of major factors of exposure and effectiveness of existing dust control methods by simulating field concrete grinding in an enclosed workplace laboratory. Air was monitored during 201 concrete grinding sessions while using a variety of grinders, accessories, and existing dust control methods, including general ventilation (GV), local exhaust ventilation (LEV), and wet grinding. Task-specific geometric mean (GM) of respirable crystalline silica dust concentrations (mg/m³ for LEV:HEPA-, LEV:Shop-vac-, wet-, and uncontrolled-grinding, while GV was off/on, were 0.17/0.09, 0.57/0.13, 1.11/0.44, and 23.1/6.80, respectively. Silica dust concentrations (mg/m³ using 100-125 mm (4-5 inch) and 180 mm (7 inch) grinding cups were 0.53/0.22 and 2.43/0.56, respectively. GM concentrations of silica dust were significantly lower for (1) GV on (66.0%) vs. off, and (2) LEV:HEPA- (99.0%), LEV:Shop-vac- (98.1%) or wet- (94.4%) vs. uncontrolled-grinding. Task-specific GM of respirable suspended particulate matter (RSP) concentrations (mg/m³ for LEV:HEPA-, LEV:Shop-vac-, wet-, and uncontrolled grinding, while GV was off/on, were 1.58/0.63, 7.20/1.15, 9.52/4.13, and 152/47.8, respectively. GM concentrations of RSP using 100-125 mm and 180 mm grinding cups were 4.78/1.62 and 22.2/5.06, respectively. GM concentrations of RSP were significantly lower for (1) GV on (70.2%) vs. off, and (2) LEV:HEPA- (98.9%), LEV:Shop-vac- (96.9%) or wet- (92.6%) vs. uncontrolled grinding. Silica dust and RSP were not significantly affected by (1) orientation of grinding surfaces (vertical vs. inclined); (2) water flow rates for wet grinding; (3) length of task-specific sampling time; or, (4) among cup sizes of 100, 115 or 125 mm. No combination of factors or control methods reduced an 8-hr exposure level to below the

  9. Production Rates of Noble Gases in the Near-Surface Layers of Europa by Energetic Charged Particles and the Potential for Determining Exposure Ages

    NASA Technical Reports Server (NTRS)

    Swindle, T. D.; Reedy, R. C.; Masarik, J.

    2003-01-01

    The surface of Europa is expected to be extremely active, undergoing tectonic and/or tidal geological activity and sputtering/ deposition, as well as impact cratering. Determination of the actual age of the surface at one or more places would greatly simplify trying to sort out what processes are occurring, and at what rate. If there is K present, as the spectral and compositional modeling discussed predict, it should be possible, in principle, to determine K-Ar crystallization ages. Whether or not there is K present, a consideration of the environment suggests we can determine an energetic particle exposure age if we can make in situ measurements of the abundances of major elements and of noble gas isotopes. This requires instrumentation that is within reach of current technology. In this paper, we calculate production rates for noble-gas isotopes in a simplified Europan surface, to quantify the amount of light noble gases produced by exposure to energetic particles.

  10. Radon 222 permeation through different polymers (PVC, EVA, PE and PP) after exposure to gamma radiation or surface treatment by cold plasma

    NASA Astrophysics Data System (ADS)

    Klein, D.; Tomasella, E.; Labed, V.; Meunier, C.; Cetier, Ph.; Robé, M. C.; Chambaudet, A.

    1997-08-01

    In order to limit radon emission during the storage of radioactive wastes and to comply with the different regulations in the storage facility, the packaging used for these types of wastes should include intermediate enclosures, such as polymer membranes used as radon barriers. However, the membrane would be subjected to different types of radiation during long periods of storage, it would have to be regularly monitored for damage. The first aim of this study is to check the efficiency and the continuity of such polymer membranes subjected to different accelerated ageing processes by exposure to gamma radiation. PolyVinyl Chloride (PVC) and Ethylene Vinyl Acetate (EVA) membranes were studied after gamma exposures. Thus, we evaluated the effects of the gamma radiations on the radon permeation coefficient, and the degradation of these polymers due to this exposure. The second objective of this study is to evaluate the modifications of the polymer surface by cold plasma. PolyEthylene (PE) and PolyPropylene (PP) membranes were studied. Exposure of a polymer to a plasma creates reactive sites on the polymer's surface. Different modifications in the surface composition (chemical composition, molecular weight, etc.) can be obtained. The advantage of the plasma process is that it acts within seconds and does not produce any noticeable effects on the bulk properties. The obtained results show that this treatment increases the polymer's efficiency as a radon barrier.

  11. Estimating source-attributable health impacts of ambient fine particulate matter exposure: global premature mortality from surface transportation emissions in 2005

    NASA Astrophysics Data System (ADS)

    Chambliss, S. E.; Silva, R.; West, J. J.; Zeinali, M.; Minjares, R.

    2014-10-01

    Exposure to ambient fine particular matter (PM2.5) was responsible for 3.2 million premature deaths in 2010 and is among the top ten leading risk factors for early death. Surface transportation is a significant global source of PM2.5 emissions and a target for new actions. The objective of this study is to estimate the global and national health burden of ambient PM2.5 exposure attributable to surface transportation emissions. This share of health burden is called the transportation attributable fraction (TAF), and is assumed equal to the proportional decrease in modeled ambient particulate matter concentrations when surface transportation emissions are removed. National population-weighted TAFs for 190 countries are modeled for 2005 using the MOZART-4 global chemical transport model. Changes in annual average concentration of PM2.5 at 0.5 × 0.67 degree horizontal resolution are based on a global emissions inventory and removal of all surface transportation emissions. Global population-weighted average TAF was 8.5 percent or 1.75 μg m-3 in 2005. Approximately 242 000 annual premature deaths were attributable to surface transportation emissions, dominated by China, the United States, the European Union and India. This application of TAF allows future Global Burden of Disease studies to estimate the sector-specific burden of ambient PM2.5 exposure. Additional research is needed to capture intraurban variations in emissions and exposure, and to broaden the range of health effects considered, including the effects of other pollutants.

  12. Fate of Extended-Spectrum β-Lactamase-Producing Escherichia coli from Faecal Sources in Surface Water and Probability of Human Exposure through Swimming.

    PubMed

    Schijven, Jack F; Blaak, Hetty; Schets, Franciska M; de Roda Husman, Ana Maria

    2015-10-01

    The goal of this study was to determine the fate of ESBL-producing Escherichia coli (ESBL-EC) emitted from faecal sources in surface water, and the probability of human exposure through swimming. Concentrations of ESBL-EC were measured in recreational waters and in source waters, being water in ditches surrounding poultry farms and municipal wastewater. Additionally, the potential of ESBL-EC in source waters to reach recreational waters located downstream of these sources was modeled. Modeled ESBL-EC concentrations in recreational waters appeared to be mostly determined by the concentrations in the source waters and by subsequent dilution in surface water, and less by inactivation. The mean (95%) risk of human exposure to ESBL-EC per person per swimming event, as assessed from measured ESBL-EC concentrations in recreational waters, was 0.16 (0.89) for men, 0.13 (0.72) for women and 0.20 (0.95) for children. Similar exposure risks were estimated for hypothetical recreational waters containing 100- or 1000-times diluted source water, located 10 days water travel time downstream of the sources. Human exposure to ESBL-EC through swimming is likely, if recreational waters are located downstream of poultry farms and municipal wastewater discharge points. PMID:26338143

  13. DEVELOPMENT AND EVALUATION OF AN AGGREGATE SURFACE SAMPLING METHOD FOR USE IN ASSESSING DERMAL EXPOSURES OF YOUNG CHILDREN

    EPA Science Inventory

    In the macroactivity approach, dermal exposure is estimated using empirically-derived transfer coefficients to aggregate the mass transfer associated with a series of contacts with a contaminated medium. The macroactivity approach affords the possibility of developing screenin...

  14. Mid-late Pleistocene glacial evolution in the Grove Mountains, East Antarctica, constraints from cosmogenic 10Be surface exposure dating of glacial erratic cobbles

    NASA Astrophysics Data System (ADS)

    Dong, Guocheng; Huang, Feixin; Yi, Chaolu; Liu, Xiaohan; Zhou, Weijian; Caffee, Marc W.

    2016-08-01

    Glacial histories from the East Antarctic Ice Sheet (EAIS) provide keys to understanding correlations between the EAIS and global climate. They are especially helpful in the assessment of global sea level change, and as a means of quantifying the magnitude of past glacial activity and the rate at which ice responded to climate change. Given the significance of EAIS glacial histories, it is imperative that more glacial chronologic data for this region be obtained, especially for the mid-to-late Pleistocene. We report cosmogenic 10Be surface exposure dating results from glacially transported cobbles embedded in blue-ice moraine material at Mount Harding, the Grove Mountains, EAIS. Forty exotic cobbles sampled along two profiles (A and B) on this blue-ice moraine present apparent exposure-ages ranging from 7.2 to 542.2 ka. We explore this scattered dataset by using Principal Component Analysis (PCA) to identify statistically significant trends in the data. We identify a correlation between exposure-age and distance of the cobbles from Mount Harding. In profile A, cobbles further from Mount Harding yield older exposure-ages than those that are relatively close. In profile B, cobbles closer to Mount Harding are found to have relatively older exposure-ages. In term of glacial history we suggest that the direction of ice flow changed during the period from ∼60 to 200 ka, and that multiple glacial fluctuations occurred in the mid-late Pleistocene.

  15. Dectin-1 and IL-17A suppress murine asthma induced by Aspergillus versicolor but not Cladosporium cladosporioides due to differences in β-glucan surface exposure.

    PubMed

    Mintz-Cole, Rachael A; Gibson, Aaron M; Bass, Stacey A; Budelsky, Alison L; Reponen, Tiina; Hershey, Gurjit K Khurana

    2012-10-01

    There is considerable evidence supporting a role for mold exposure in the pathogenesis and expression of childhood asthma. Aspergillus versicolor and Cladosporium cladosporioides are common molds that have been implicated in asthma. In a model of mold-induced asthma, mice were repeatedly exposed to either A. versicolor or C. cladosporioides spores. The two molds induced distinct phenotypes, and this effect was observed in both BALB/c and C57BL/6 strains. C. cladosporioides induced robust airway hyperresponsiveness (AHR), eosinophilia, and a predominately Th2 response, whereas A. versicolor induced a strong Th17 response and neutrophilic inflammation, but very mild AHR. Neutralization of IL-17A resulted in strong AHR and eosinophilic inflammation following A. versicolor exposure. In Dectin-1-deficient mice, A. versicolor exposure resulted in markedly attenuated IL-17A and robust AHR compared with wild-type mice. In contrast, C. cladosporioides induced AHR and eosinophilic inflammation independent of IL-17A and Dectin-1. A. versicolor, but not C. cladosporioides, spores had increased exposure of β-glucans on their surface and were able to bind Dectin-1. Thus, the host response to C. cladosporioides was IL-17A- and Dectin-1-independent, whereas Dectin-1- and IL-17A-dependent pathways were protective against the development of asthma after exposure to A. versicolor. PMID:22962686

  16. Surface exposure dating of glacial lake shorelines: implications for constraining ice margin positions and meltwater outbursts during the last deglaciation

    NASA Astrophysics Data System (ADS)

    Dube-Loubert, Hugo; Roy, Martin; Schaefer, Joerg

    2016-04-01

    The Laurentide ice sheet (LIS) played an important role in the climate variability of the last deglaciation, notably through large discharges of meltwater to the North Atlantic that disturbed the ocean's circulation and heat transport. Deglaciation of the northeastern sector of the LIS was complex and included the development of large ice-dammed lakes that were confined within the main river valleys draining northward into Ungava Bay. The history of these lakes is closely related to the temporal evolution of the Labrador ice dome, but large uncertainties regarding the position and dynamic of the ice margin through time currently limit our understanding of these glacial lakes. In the Ungava lowlands, glacial lake Naskaupi invaded the George River valley, leaving a series of well-developed shorelines and deltas. These spectacular raised shorelines are 10 to 20 meters wide and can be followed for several kilometers. Our field investigations and remote sensing analysis indicate that Lake Naskaupi experienced a complex history, as shown by the succession of shorelines that likely reflect the opening of new topographic outlets during ice retreat. Constraining the timing of the different phases of the lake and its drainage has traditionally been challenging, as organic material suitable for radiocarbon dating is scarce or lacking. Recent progress in Surface Exposure Dating (SED) by cosmogenic nuclides now inspires novel approaches to glacial and deglacial geomorphology. Here we apply 10Be SED to boulders that form part of these shorelines and mark the main (high-level) stage of Lake Naskaupi. We sampled 4-6 multi-meter size boulders at 4 different sites. Preliminary results show high internal consistency and, indicate that the main lake phase developed very late in the regional deglaciation, which extends from about 8500 to 6800 cal. yr BP (Dyke and Prest, 1987). We also present SED results from boulders deposited by a substantial outburst flood presumably associated with

  17. Chlorine-36 Exposure Dating of Recent Explosive Events on Mauna Loa, Hawaii

    NASA Astrophysics Data System (ADS)

    Hungerford, J. D.; Stone, J. O.; Fifield, K.; Trusdell, F. A.

    2002-12-01

    We have dated lavas and explosive debris from around the summit caldera of Mauna Loa using in-situ produced cosmogenic Cl-36. Explosive deposits occur as three debris aprons of blocks up to 2 meters. Within the ejecta debris are intrusive rocks (gabbros, pyroxenites), and vesicular and dense basalts. The pahoehoe substrate of the northwest fan has an apparent exposure age of 970 +/- 120 years, in good agreement with radiocarbon ages that range in age from 1090 - 1200 yr B.P. Three clasts from the NW fan have exposure ages ranging from 930+/-120 to 1140+/-120 years, indicating an explosive eruption occured very shortly after emplacment of the underlying flow. These ages should be regarded as upper limits until we have confirmed that Cl-36/Cl ratios are low in freshly erupted Mauna Loa basalt. Low initial ratios (<1e-15) are anticipated based on magmatic U, Th and Cl concentrations and likely magma chamber residence times. Low ratios would also result from assimilation of marine chloride with Cl-36/Cl <1e-15. However, assimilation of surficial material, or magmatic interaction with Cl-36 bearing groundwater might result in higher initial values. We are measuring samples from the 1975 and 1984 eruptions to investigate these possibilities.

  18. Occupational Exposure to Cobalt and Tungsten in the Swedish Hard Metal Industry: Air Concentrations of Particle Mass, Number, and Surface Area.

    PubMed

    Klasson, Maria; Bryngelsson, Ing-Liss; Pettersson, Carin; Husby, Bente; Arvidsson, Helena; Westberg, Håkan

    2016-07-01

    Exposure to cobalt in the hard metal industry entails severe adverse health effects, including lung cancer and hard metal fibrosis. The main aim of this study was to determine exposure air concentration levels of cobalt and tungsten for risk assessment and dose-response analysis in our medical investigations in a Swedish hard metal plant. We also present mass-based, particle surface area, and particle number air concentrations from stationary sampling and investigate the possibility of using these data as proxies for exposure measures in our study. Personal exposure full-shift measurements were performed for inhalable and total dust, cobalt, and tungsten, including personal real-time continuous monitoring of dust. Stationary measurements of inhalable and total dust, PM2.5, and PM10 was also performed and cobalt and tungsten levels were determined, as were air concentration of particle number and particle surface area of fine particles. The personal exposure levels of inhalable dust were consistently low (AM 0.15mg m(-3), range <0.023-3.0mg m(-3)) and below the present Swedish occupational exposure limit (OEL) of 10mg m(-3) The cobalt levels were low as well (AM 0.0030mg m(-3), range 0.000028-0.056mg m(-3)) and only 6% of the samples exceeded the Swedish OEL of 0.02mg m(-3) For continuous personal monitoring of dust exposure, the peaks ranged from 0.001 to 83mg m(-3) by work task. Stationary measurements showed lower average levels both for inhalable and total dust and cobalt. The particle number concentration of fine particles (AM 3000 p·cm(-3)) showed the highest levels at the departments of powder production, pressing and storage, and for the particle surface area concentrations (AM 7.6 µm(2)·cm(-3)) similar results were found. Correlating cobalt mass-based exposure measurements to cobalt stationary mass-based, particle area, and particle number concentrations by rank and department showed significant correlations for all measures except for particle number

  19. Occupational Exposure to Cobalt and Tungsten in the Swedish Hard Metal Industry: Air Concentrations of Particle Mass, Number, and Surface Area

    PubMed Central

    Bryngelsson, Ing-Liss; Pettersson, Carin; Husby, Bente; Arvidsson, Helena; Westberg, Håkan

    2016-01-01

    Exposure to cobalt in the hard metal industry entails severe adverse health effects, including lung cancer and hard metal fibrosis. The main aim of this study was to determine exposure air concentration levels of cobalt and tungsten for risk assessment and dose–response analysis in our medical investigations in a Swedish hard metal plant. We also present mass-based, particle surface area, and particle number air concentrations from stationary sampling and investigate the possibility of using these data as proxies for exposure measures in our study. Personal exposure full-shift measurements were performed for inhalable and total dust, cobalt, and tungsten, including personal real-time continuous monitoring of dust. Stationary measurements of inhalable and total dust, PM2.5, and PM10 was also performed and cobalt and tungsten levels were determined, as were air concentration of particle number and particle surface area of fine particles. The personal exposure levels of inhalable dust were consistently low (AM 0.15mg m−3, range <0.023–3.0mg m−3) and below the present Swedish occupational exposure limit (OEL) of 10mg m−3. The cobalt levels were low as well (AM 0.0030mg m−3, range 0.000028–0.056mg m−3) and only 6% of the samples exceeded the Swedish OEL of 0.02mg m−3. For continuous personal monitoring of dust exposure, the peaks ranged from 0.001 to 83mg m−3 by work task. Stationary measurements showed lower average levels both for inhalable and total dust and cobalt. The particle number concentration of fine particles (AM 3000 p·cm−3) showed the highest levels at the departments of powder production, pressing and storage, and for the particle surface area concentrations (AM 7.6 µm2·cm−3) similar results were found. Correlating cobalt mass-based exposure measurements to cobalt stationary mass-based, particle area, and particle number concentrations by rank and department showed significant correlations for all measures except for particle

  20. Distribution of 2,4-D in air and on surfaces inside residences after lawn applications: comparing exposure estimates from various media for young children.

    PubMed Central

    Nishioka, M G; Lewis, R G; Brinkman, M C; Burkholder, H M; Hines, C E; Menkedick, J R

    2001-01-01

    We collected indoor air, surface wipes (floors, table tops, and window sills), and floor dust samples at multiple locations within 11 occupied and two unoccupied homes both before and after lawn application of the herbicide 2,4-D. We measured residues 1 week before and after application. We used collected samples to determine transport routes of 2,4-D from the lawn into the homes, its subsequent distribution between the indoor surfaces, and air concentration as a function of airborne particle size. We used residue measurements to estimate potential exposures within these homes. After lawn application, 2,4-D was detected in indoor air and on all surfaces throughout all homes. Track-in by an active dog and by the homeowner applicator were the most significant factors for intrusion. Resuspension of floor dust was the major source of 2,4-D in indoor air, with highest levels of 2,4-D found in the particle size range of 2.5-10 microm. Resuspended floor dust was also a major source of 2,4-D on tables and window sills. Estimated postapplication indoor exposure levels for young children from nondietary ingestion may be 1-10 microg/day from contact with floors, and 0.2-30 microg/day from contact with table tops. These are estimated to be about 10 times higher than the preapplication exposures. By comparison, dietary ingestion of 2,4-D is approximately 1.3 microg/day. PMID:11713005

  1. Surface-exposure ages of Front Range moraines that may have formed during the Younger Dryas, 8.2 cal ka, and Little Ice Age events

    USGS Publications Warehouse

    Benson, L.; Madole, R.; Kubik, P.; McDonald, R.

    2007-01-01

    Surface-exposure (10Be) ages have been obtained on boulders from three post-Pinedale end-moraine complexes in the Front Range, Colorado. Boulder rounding appears related to the cirque-to-moraine transport distance at each site with subrounded boulders being typical of the 2-km-long Chicago Lakes Glacier, subangular boulders being typical of the 1-km-long Butler Gulch Glacier, and angular boulders being typical of the few-hundred-m-long Isabelle Glacier. Surface-exposure ages of angular boulders from the Isabelle Glacier moraine, which formed during the Little Ice Age (LIA) according to previous lichenometric dating, indicate cosmogenic inheritance values ranging from 0 to ???3.0 10Be ka.11Surface-exposure ages in this paper are labeled 10Be; radiocarbon ages are labeled 14C ka, calendar and calibrated radiocarbon ages are labeled cal ka, and layer-based ice-core ages are labeled ka. 14C ages, calibrated 14C ages, and ice core ages are given relative to AD 1950, whereas 10Be ages are given relative to the sampling date. Radiocarbon ages were calibrated using CALIB 5.01 and the INTCAL04 data base Stuiver et al. (2005). Ages estimated using CALIB 5.01 are shown in terms of their 1-sigma range. Subangular boulders from the Butler Gulch end moraine yielded surface-exposure ages ranging from 5 to 10.2 10Be ka. We suggest that this moraine was deposited during the 8.2 cal ka event, which has been associated with outburst floods from Lake Agassiz and Lake Ojibway, and that the large age range associated with the Butler Gulch end moraine is caused by cosmogenic shielding of and(or) spalling from boulders that have ages in the younger part of the range and by cosmogenic inheritance in boulders that have ages in the older part of the range. The surface-exposure ages of eight of nine subrounded boulders from the Chicago Lakes area fall within the 13.0-11.7 10Be ka age range, and appear to have been deposited during the Younger Dryas interval. The general lack of inheritance in

  2. MODELED RESIDENTIAL CHLORPYRIFOS EXPOSURE AND DOSE TO CHILDREN VIA DERMAL SURFACE RESIDUE CONTACT AND NON-DIETARY INGESTION

    EPA Science Inventory

    A physically-based stochastic model has been applied to estimate residential chlorpyrifos exposure and dace to children via the non-dietary ingestion and dermal residue contact pathways. Time-location-activity data for 2825 children were sampled from national surveys to generat...

  3. Exposure to Phthalate Emitted from Vinyl Flooring and Sorbed to Interior Surfaces, Dust, Airborne Particles and Human Skin

    EPA Science Inventory

    There is an urgent need to characterize potential risk to human health and the environment that arises from the manufacture and use of tens of thousands of chemicals. Computational tools and approaches for characterizing and prioritizing exposure are required: to provide input f...

  4. Chronic TiO₂ nanoparticle exposure to a benthic organism, Hyalella azteca: impact of solar UV radiation and material surface coatings on toxicity.

    PubMed

    Wallis, Lindsay K; Diamond, Stephen A; Ma, Hongbo; Hoff, Dale J; Al-Abed, Souhail R; Li, Shibin

    2014-11-15

    There is limited information on the chronic effects of nanomaterials to benthic organisms, as well as environmental mitigating factors that might influence this toxicity. The present study aimed to fill these data gaps by examining various growth endpoints (weight gain, instantaneous growth rate, and total protein content) for up to a 21 d sediment exposure of TiO2 nanoparticles (nano-TiO2) to a representative benthic species, Hyalella azteca. An uncoated standard, P25, and an Al(OH)3 coated nano-TiO2 used in commercial products were added to sediment at 20 mg/L or 100 mg/L Under test conditions, UV exposure alone was shown to be a greater cause of toxicity than even these high levels of nano-TiO2 exposure, indicating that different hazards need to be addressed in toxicity testing scenarios. In addition, this study showed the effectiveness of a surface coating on the decreased photoactivity of the material, as the addition of an Al(OH)3 coating showed a dramatic decrease in reactive oxygen species (ROS) production. However, this reduced photoactivity was found to be partially restored when the coating had been degraded, leading to the need for future toxicity tests which examine the implications of weathering events on particle surface coatings. PMID:25203828

  5. Assessing exposure to transformation products of soil-applied organic contaminants in surface water: comparison of model predictions and field data.

    PubMed

    Kern, Susanne; Singer, Heinz; Hollender, Juliane; Schwarzenbach, René P; Fenner, Kathrin

    2011-04-01

    Transformation products (TPs) of chemicals released to soil, for example, pesticides, are regularly detected in surface and groundwater with some TPs even dominating observed pesticide levels. Given the large number of TPs potentially formed in the environment, straightforward prioritization methods based on available data and simple, evaluative models are required to identify TPs with a high aquatic exposure potential. While different such methods exist, none of them has so far been systematically evaluated against field data. Using a dynamic multimedia, multispecies model for TP prioritization, we compared the predicted relative surface water exposure potential of pesticides and their TPs with experimental data for 16 pesticides and 46 TPs measured in a small river draining a Swiss agricultural catchment. Twenty TPs were determined quantitatively using solid-phase extraction liquid chromatography mass spectrometry (SPE-LC-MS/MS), whereas the remaining 26 TPs could only be detected qualitatively because of the lack of analytical reference standards. Accordingly, the two sets of TPs were used for quantitative and qualitative model evaluation, respectively. Quantitative comparison of predicted with measured surface water exposure ratios for 20 pairs of TPs and parent pesticides indicated agreement within a factor of 10, except for chloridazon-desphenyl and chloridazon-methyl-desphenyl. The latter two TPs were found to be present in elevated concentrations during baseflow conditions and in groundwater samples across Switzerland, pointing toward high concentrations in exfiltrating groundwater. A simple leaching relationship was shown to qualitatively agree with the observed baseflow concentrations and to thus be useful in identifying TPs for which the simple prioritization model might underestimate actual surface water concentrations. Application of the model to the 26 qualitatively analyzed TPs showed that most of those TPs categorized as exhibiting a high aquatic

  6. Effects of prenatal exposure to surface-coated nanosized titanium dioxide (UV-Titan). A study in mice

    PubMed Central

    2010-01-01

    Background Engineered nanoparticles are smaller than 100 nm and designed to improve or achieve new physico-chemical properties. Consequently, also toxicological properties may change compared to the parent compound. We examined developmental and neurobehavioral effects following maternal exposure to a nanoparticulate UV-filter (UV-titan L181). Methods Time-mated mice (C57BL/6BomTac) were exposed by inhalation 1h/day to 42 mg/m3 aerosolized powder (1.7·106 n/cm3; peak-size: 97 nm) on gestation days 8-18. Endpoints included: maternal lung inflammation; gestational and litter parameters; offspring neurofunction and fertility. Physicochemical particle properties were determined to provide information on specific exposure and deposition. Results Particles consisted of mainly elongated rutile titanium dioxide (TiO2) with an average crystallite size of 21 nm, modified with Al, Si and Zr, and coated with polyalcohols. In exposed adult mice, 38 mg Ti/kg was detected in the lungs on day 5 and differential cell counts of bronchoalveolar lavage fluid revealed lung inflammation 5 and 26-27 days following exposure termination, relative to control mice. As young adults, prenatally exposed offspring tended to avoid the central zone of the open field and exposed female offspring displayed enhanced prepulse inhibition. Cognitive function was unaffected (Morris water maze test). Conclusion Inhalation exposure to nano-sized UV Titan dusts induced long term lung inflammation in time-mated adult female mice. Gestationally exposed offspring displayed moderate neurobehavioral alterations. The results are discussed in the light of the observed particle size distribution in the exposure atmosphere and the potential pathways by which nanoparticles may impart changes in fetal development. PMID:20546558

  7. Roughening, recession, and chemical alteration of marble and limestone sample surfaces during atmospheric exposure in the eastern United States

    SciTech Connect

    Youngdahl, C.A.; Doe, B.R.

    1986-02-01

    Marble and limestone surfaces were exposed to atmospheric conditions at four eastern US sites and were monitored for changes in surface chemistry, surface roughness/recession, and weight. The effect of acid deposition, to which calcareous materials are especially sensitive, was of particular interest. Results are described for the first year of testing, and aspects of a preliminary equation to relate damage to environmental factors are discussed. Thus far, findings support that acid deposition substantially damages marble and limestone surfaces. Improvements in methods to reduce uncertainties in the quantitative contributions of important chemical species are outlined for the ongoing effort.

  8. Surface potential due to charge accumulation during vacuum ultraviolet exposure for high-k and low-k dielectrics

    SciTech Connect

    Ren, H.; Sinha, H.; Sehgal, A.; Nichols, M. T.; Shohet, J. L.; Antonelli, G. A.; Nishi, Y.

    2010-08-16

    The surface potential due to charge accumulation during vacuum ultraviolet irradiation of high-k and low-k thin dielectric films is measured. Measurement of the substrate current, which is the sum of the charge-accumulation and photoinjection currents, allows an in situ monitoring of the charge accumulation during irradiation. The relationship between the substrate current and the calculated in situ surface potential is also found, eliminating the need for a separate surface-potential measurement. With a high photon dose, the surface potential and substrate current reach a steady-state value with no further net charge accumulation.

  9. Lunar surface dynamics: Some general conclusions and new results from Apollo 16 and 17. [exposure age determination of lunar rocks, boulders, and craters

    NASA Technical Reports Server (NTRS)

    Crozaz, G.; Drozd, R.; Hohenberg, C.; Morgan, C.; Ralston, C.; Walker, R.; Yuhas, D.

    1974-01-01

    Exposure ages of Apollo 17 rocks as measured by tracks and the Kr-Kr rare gas method are reported. Concordant ages of 22 - or + 1 million year (my) are obtained for the station 6 boulder sample 76315. This value is interpreted as the time when the station 6 boulder was emplaced in its present position. Reasonable agreement is also obtained by the two methods for another station 6 boulder, sample 76015. Discordant ages (respectively 5 and 28 my by the track and rare gas methods) are obtained for the station 7 boulder sample, 77135, indicating that the boulder was emplaced at least 5 my ago. The 72 my exposure age of 75035, in general agreement with previous measurements of approximately 85 my for another Camelot boulder, may well date the formation of Camelot. Rock 76015 was split and one surface exposed to the sky through a very small solid angle.

  10. Using 10Be cosmogenic surface exposure dating to determine the evolution of the Purgatorio active fault in the Andean forearc, southern Peru

    NASA Astrophysics Data System (ADS)

    Carlos, Benavente; Swann, Zerathe; Laurence, Audin; Fabrizio, Delgado; Marianne, Saillard; Sarah, Hall R.; Aster Team

    2015-04-01

    Active transpressive deformation has been occurring along the Andean hyperarid forearc for the last 3 Myrs but many of these faults are still not described even if able to produce large damaging earthquakes. Active faulting along the northern part of the Arica Bend can be recognized due to the presence of well-preserved and sharp fault scarps indicating recent surface slip. During the Mio-Pliocene, deposition within the forearc continental basins resulted in the formation of vast fan deposits and conglomerates of the Moquegua Formation, which can be considered as bedrock in this exposure study (~45-4 Ma; Tosdal et al., 1984; Sebrier et al., 1988a; Roperch et al., 2006). The typical vertical Purgatorio fault scarps offset both the Moquegua bedrock and several younger geomorphic features associated with <300kyrs climatic and 400 years old volcanic extreme events. This study focus on quantifying slip rate variations in time along a 5-meters high vertical fault scarp to understand how the fault is evolving. These results are achieved via surface exposure dating of the sampled seismically broken cobbolds of the Moquegua formation outcroping vertically along the fault scarp. These samples are well-suited to the application of in situ produced cosmogenic radionuclides for surface exposure dating, as the hyperarid region has extremely low erosion rates. We sampled the scarp away from any significant drainage so as to avoid possibly disturbed areas. The sampling did involve extracting quarzite conglomeratic material along the bedrock scarp and on the upper surrounding crests. The aim has been to measure Berylium-20 TCN (Terrestrial in situ Cosmogenic Nuclides) concentrations to determine exposure age as a function of height on the scarp. This has been successfully employed on one scarp in Italy based on Chlorine-36 TCN (Palumbo et al., 2004). However, slow faults behaviour remains unclear and more contributions are needed. Quaternary activity of the Purgatorio fault system

  11. Use of a variable exposure photographic pyrometer to measure surface temperatures on a hemispherical-face model

    NASA Technical Reports Server (NTRS)

    Kantsios, A. G.; Henley, W. C., Jr.; Snow, W. L.

    1982-01-01

    The use of a photographic pyrometer for nonintrusive measurement of high temperature surfaces in a wind tunnel test is described. The advantages of the pyrometer for measuring surfaces whose unique shape makes use of thermocouples difficult are pointed out. The use of computer operated densitometers or optical processors for the data reduction is recommended.

  12. Long-term slip rate of the southern San Andreas Fault, from 10Be-26Al surface exposure dating of an offset alluvial fan

    SciTech Connect

    der Woerd, J v; Klinger, Y; Sieh, K; Tapponnier, P; Ryerson, F; M?riaux, A

    2006-01-13

    We determine the long-term slip rate of the southern San Andreas Fault in the southeastern Indio Hills using {sup 10}Be and {sup 26}Al isotopes to date an offset alluvial fan surface. Field mapping complemented with topographic data, air photos and satellite images allow to precisely determine piercing points across the fault zone that are used to measure an offset of 565 {+-} 80 m. A total of twenty-six quartz-rich cobbles from three different fan surfaces were collected and dated. The tight cluster of nuclide concentrations from 19 samples out of 20 from the offset fan surface implies a simple exposure history, negligible prior exposure and erosion, and yield an age of 35.5 {+-} 2.5 ka. The long-term slip rate of the San Andreas Fault south of Biskra Palms is thus 15.9 {+-} 3.4 mm/yr. This rate is about 10 mm/yr slower than geological (0-14 ka) and short-term geodetic estimates for this part of the San Andreas Fault implying changes in slip rate or in faulting behavior. This result puts new constraints on the slip rate of the San Jacinto and on the Eastern California Shear Zone for the last 35 ka. Our study shows that more sites along the major faults of southern California need to be targeted to better constrain the slip-rates over different time scales.

  13. Atmospheric constituents and surface-level UVB: Implications for a paleoaltimetry proxy and attempts to reconstruct UV exposure during volcanic episodes

    NASA Astrophysics Data System (ADS)

    Thomas, Brian C.; Goracke, Byron D.; Dalton, Sean M.

    2016-11-01

    Chemical and morphological features of spores and pollens have been linked to changes in solar ultraviolet radiation (specifically UVB, 280-315 nm) at Earth's surface. Variation in UVB exposure as inferred from these features has been suggested as a proxy for paleoaltitude; such proxies are important in understanding the uplift history of high altitude plateaus, which in turn is important for testing models of the tectonic processes responsible for such uplift. While UVB irradiance does increase with altitude above sea level, a number of other factors affect the irradiance at any given place and time. In this modeling study we use the TUV atmospheric radiative transfer model to investigate dependence of surface-level UVB irradiance and relative biological impact on a number of constituents in Earth's atmosphere that are variable over long and short time periods. We consider changes in O3 column density, and SO2 and sulfate aerosols due to periods of volcanic activity, including that associated with the formation of the Siberian Traps. We find that UVB irradiance may be highly variable under volcanic conditions and variations in several of these atmospheric constituents can easily mimic or overwhelm changes in UVB irradiance due to changes in altitude. On the other hand, we find that relative change with altitude is not very sensitive to different sets of atmospheric conditions. Any paleoaltitude proxy based on UVB exposure requires confidence that the samples under comparison were located at roughly the same latitude, under very similar O3 and SO2 columns, with similar atmospheric aerosol conditions. In general, accurate estimates of the surface-level UVB exposure at any time and location require detailed radiative transfer modeling taking into account a number of atmospheric factors; this result is important for paleoaltitude proxies as well as attempts to reconstruct the UV environment through geologic time and to tie extinctions, such as the end-Permian mass

  14. Characterization of the formyl peptide chemotactic receptor appearing at the phagocytic cell surface after exposure to phorbol myristate acetate

    SciTech Connect

    Gardner, J.P.; Melnick, D.A.; Malech, H.L.

    1986-02-15

    The biochemistry and subcellular source of new formyl peptide chemotactic receptor appearing at the human neutrophil and differentiated HL-60 (d-HL-60) cell surface after stimulation with phorbol myristate acetate (PMA) were examined. Formyl peptide receptor was analyzed by affinity labeling with formyl-norleu-leu-phe-norleu- (/sup 125/I)iodotyr-lys and ethylene glycol bis(succinimidyl succinate) followed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) and densitometric analysis of autoradiographs. PMA, a specific granule secretagogue, increases affinity labeling of formyl peptide receptors on the neutrophil surface by 100%, and on d-HL-60, which lack specific granule markers, by 20%. Papain treatment markedly reduces surface labeling of formyl peptide receptor in both neutrophils and d-HL-60, and results in the appearance of a lower m.w. membrane-bound receptor fragment. PMA stimulation of papain-treated cells increases uncleaved surface receptor on neutrophils by 400%, and on D-HL-60 by only 45%. This newly appearing receptor is the same apparent m.w. (55,000 to 75,000 for neutrophils; 62,000 to 80,000 for d-HL-60) and yields the same papain cleavage product as receptor on the surface of unstimulated cells. These observations suggest that specific granule membranes contain large amounts of formyl peptide receptor, which is biochemically identical to that found on the cell surface and can be mobilized to the cell surface with appropriate stimulation.

  15. OSIRIS observations of meter-sized exposures of H2O ice at the surface of 67P/Churyumov-Gerasimenko and interpretation using laboratory experiments

    NASA Astrophysics Data System (ADS)

    Pommerol, A.; Thomas, N.; El-Maarry, M. R.; Pajola, M.; Groussin, O.; Auger, A.-T.; Oklay, N.; Fornasier, S.; Feller, C.; Davidsson, B.; Gracia-Berná, A.; Jost, B.; Marschall, R.; Poch, O.; Barucci, M. A.; Bertaux, J.-L.; La Forgia, F.; Keller, H. U.; Kührt, E.; Lowry, S. C.; Mottola, S.; Naletto, G.; Sierks, H.; Barbieri, C.; Lamy, P. L.; Rodrigo, R.; Koschny, D.; Rickman, H.; Agarwal, J.; A'Hearn, M. F.; Bertini, I.; Boudreault, S.; Cremonese, G.; Da Deppo, V.; De Cecco, M.; Debei, S.; Güttler, C.; Fulle, M.; Gutierrez, P. J.; Hviid, S. F.; Ip, W.-H.; Jorda, L.; Knollenberg, J.; Kovacs, G.; Kramm, J.-R.; Küppers, E.; Lara, L.; Lazzarin, M.; Lopez Moreno, J. L.; Marzari, F.; Michalik, H.; Preusker, F.; Scholten, F.; Tubiana, C.; Vincent, J.-B.

    2015-11-01

    Since OSIRIS started acquiring high-resolution observations of the surface of the nucleus of comet 67P/Churyumov-Gerasimenko, over one hundred meter-sized bright spots have been identified in numerous types of geomorphologic regions, but mostly located in areas receiving low insolation. The bright spots are either clustered, in debris fields close to decameter-high cliffs, or isolated without structural relation to the surrounding terrain. They can be up to ten times brighter than the average surface of the comet at visible wavelengths and display a significantly bluer spectrum. They do not exhibit significant changes over a period of a few weeks. All these observations are consistent with exposure of water ice at the surface of boulders produced by dislocation of the weakly consolidated layers that cover large areas of the nucleus. Laboratory experiments show that under simulated comet surface conditions, analog samples acquire a vertical stratification with an uppermost porous mantle of refractory dust overlaying a layer of hard ice formed by recondensation or sintering under the insulating dust mantle. The evolution of the visible spectrophotometric properties of samples during sublimation is consistent with the contrasts of brightness and color seen at the surface of the nucleus. Clustered bright spots are formed by the collapse of overhangs that is triggered by mass wasting of deeper layers. Isolated spots might be the result of the emission of boulders at low velocity that are redepositioned in other regions.

  16. Carbon monoxide concentration and exposure time effects on the depth of CO penetration and surface color of raw and cooked beef longissimus lumborum steaks.

    PubMed

    Sakowska, A; Guzek, D; Głąbska, D; Wierzbicka, A

    2016-11-01

    This study investigated the influence of carbon monoxide (CO) exposure time (0, 7, 14, and 21days) and concentration in gas mixture on depth of penetration and the surface color of raw and cooked striploin steaks. Seven packaging treatments were evaluated: vacuum, vacuum after 48h of exposure to 0.1%, 0.3% or 0.5% CO (mixed with 30% CO2 and 69.5-69.9% N2), and modified atmosphere packaging (MAP) containing the same gas mixtures. CO penetration depth increased as exposure times and CO concentration in gas mixtures increased (p<0.05). However, the carboxymyoglobin that formed did not always turn brown during thermal treatment. In cooked samples treated with 0.3% and 0.5% CO-MAP, a red carboxymyoglobin border was visible at the cross section, whereas other CO packaging treatments had its partial or total browning. To create a red color in raw and avoid a red boarder in cooked beef, up to 0.5% CO in vacuum packages and only 0.1% for MAP can be recommended. PMID:27337678

  17. Conditions for the formation of various surface-plasma states upon quasi-steady-state exposure to CO2 laser radiation

    NASA Astrophysics Data System (ADS)

    Danshchikov, E. V.; Dymshakov, V. A.; Lebedev, F. V.; Riazanov, A. V.

    1985-09-01

    Experiments were carried out to study the conditions for the formation of an erosion flame in a target vapor on the surface of various metals during quasi-steady-state exposure to CO2 laser radiation. The duration of the CO2 laser pulses was 1 ms. The composition of the metal target specimens and the locations of the focusing spots are given in a table, together with the ambient gas pressures. The formation of an optical discharge in the ambient gas near the surface of the metal target specimens is described in detail. Some fundamental relationships between the laser parameters and the plasma characteristics of the different metal specimens are discussed on the basis of the experimental data.

  18. Geometries and electronic structures of the hydrogenated diamond (100) surface upon exposure to active ions: A first principles study

    NASA Astrophysics Data System (ADS)

    Liu, Feng-Bin; Li, Jing-Lin; Chen, Wen-Bin; Cui, Yan; Jiao, Zhi-Wei; Yan, Hong-Juan; Qu, Min; Di, Jie-Jian

    2016-02-01

    To elucidate the effects of physisorbed active ions on the geometries and electronic structures of hydrogenated diamond films, models of HCO 3 - , H3O+, and OH- ions physisorbed on hydrogenated diamond (100) surfaces were constructed. Density functional theory was used to calculate the geometries, adsorption energies, and partial density of states. The results showed that the geometries of the hydrogenated diamond (100) surfaces all changed to different degrees after ion adsorption. Among them, the H3O+ ion affected the geometry of the hydrogenated diamond (100) surfaces the most. This is well consistent with the results of the calculated adsorption energies, which indicated that a strong electrostatic attraction occurs between the hydrogenated diamond (100) surface and H3O+ ions. In addition, electrons transfer significantly from the hydrogenated diamond (100) surface to the adsorbed H3O+ ion, which induces a downward shift in the HOMO and LUMO energy levels of the H3O+ ion. However, for active ions like OH- and HCO 3 - , no dramatic change appears for the electronic structures of the adsorbed ions.

  19. Coincident exposure/drowning surfaces within Middle Cambrian Grand Cycles, East Tennessee: A model for abrupt limestone/shale transitions/sequence boundaries

    SciTech Connect

    Rankey, E.C.; Srinivasan, K.; Walker, K.R. . Dept. of Geological Science)

    1992-01-01

    Vertical transition from limestones to shales mark the boundaries of Cambrian Grand Cycles in Passive Margin Sequences over a wide geographic area. Field, petrographic, and geochemical evidence from near platform-edge mudstones and boundstones and platform-edge boundstones at the tops of the Craig Limestone and Maryville Limestone of the Conasauga Group in the southern Appalachians indicate platform death by subaerial exposure, followed by platform drowning and subsequent onlap of siliciclastic deposits. Physical evidence, in the form of scalloped truncation surfaces, as well as petrographic evidence consisting of wholesale and fabric-selective dissolution, internal brecciation, and vadose silt deposition indicate meteoric diagenesis following exposure. Depleted stable oxygen isotope compositions of inter- and intragranular blocky clear calcite spar of the Maryville Limestone have a mean delta O-18 composition of [minus]9.3[per thousand] (PDB) and a mean delta C-13 composition of +0.01[per thousand](PDB). Preliminary data from the Craig Limestone indicate similar delta C-13 values, but more depleted. Thus, the authors propose a common origin for the limestone-shale transitions at the top of these two units. Subaerial exposure during a sea-level fall at the top of these carbonate units terminated carbonate deposition. During exposure, a meteoric-water lens developed in the platform sediments leading to early diagenetic alteration. A rapid relative sea-level rise then drowned the platform, followed by subsidence and deepening during the lag-time before the onset of carbonate deposition. The deepening suppressed carbonate production and allowed fine siliciclastics characteristic of the adjacent basin to onlap the drowned platform.

  20. The effects of nitric acid and silane surface treatments on carbon fibers and carbon/vinyl ester composites before and after seawater exposure

    NASA Astrophysics Data System (ADS)

    Langston, Tye A.

    This research focuses on carbon fiber treatment by nitric acid and 3-(trimethoxysilyl)propyl methacrylate silane, and how this affects carbon/vinyl ester composites. These composites offer great benefits, but it is difficult to bond the fiber and matrix together, and without a strong interfacial bond, composites fall short of their potential. Silanes work well with glass fiber, but do not bond directly to carbon fiber because its surface is not reactive to liquid silanes. Oxidizing surface treatments are often prescribed for improved wetting and bonding to carbon, but good results are not always achieved. Furthermore, there is the unanswered question of environmental durability. This research aimed to form a better understanding of oxidizing carbon fiber treatments, determine if silanes can be bonded to oxidized surfaces, and how these treatments affect composite strength and durability before and after seawater exposure. Nitric acid treatments on carbon fibers were found to improve their tensile strength to a constant level by smoothing surface defects and chemically modifying their surfaces by increasing carbonyl and carboxylic acid concentrations. Increasing these surface group concentrations raises fiber polar energy and causes them to cohere. This impedes wetting, resulting in poor quality, high void content composites, even though there appeared to be improved adhesion between the fibers and matrix. Silane was found to bond to the oxidized carbon fiber surfaces, as evidenced by changes in both fiber and composite properties. The fibers exhibited low polarity and cohesion, while the composites displayed excellent resin wetting, low void content, and low seawater weight gain and swelling. On the contrary, the oxidized fibers that were not treated with silane exhibited high polarity and fiber cohesion. Their composites displayed poor wetting, high void content, high seawater weight gain, and low swelling. Both fiber treatment types resulted in great improvements

  1. Estimating Dermal Transfer of Copper Particles from the Surfaces of Pressure-Treated Lumber and Implications for Exposure

    EPA Science Inventory

    Lumber pressure-treated with micronized copper was examined for the release of copper and copper micro/nanoparticles using a surface wipe method to simulate dermal transfer. In 2003, the wood industry began replacing CCA treated lumber products for residential use with copper ba...

  2. Characterization of Missouri surface waters near point sources of pollution reveals potential novel atmospheric route of exposure for bisphenol A and wastewater hormonal activity pattern

    USGS Publications Warehouse

    Kassotis, Christopher D.; Alvarez, David A.; Taylor, Julia A.; vom Saal, Frederick S.; Nagel, Susan C.; Tillitt, Donald E.

    2015-01-01

    Surface water contamination by chemical pollutants increasingly threatens water quality around the world. Among the many contaminants found in surface water, there is growing concern regarding endocrine disrupting chemicals, based on their ability to interfere with some aspect of hormone action in exposed organisms, including humans. This study assessed water quality at several sites across Missouri (near wastewater treatment plants and airborne release sites of bisphenol A) based on hormone receptor activation potencies and chemical concentrationspresent in the surface water. We hypothesized that bisphenol A and ethinylestradiol would be greater in water near permitted airborne release sites and wastewater treatment plant inputs, respectively, and that these two compounds would be responsible for the majority of activities in receptor-based assays conducted with water collected near these sites. Concentrations of bisphenol A and ethinylestradiol were compared to observed receptor activities using authentic standards to assess contribution to total activities, and quantitation of a comprehensive set of wastewater compounds was performed to better characterize each site. Bisphenol A concentrations were found to be elevated in surface water near permitted airborne release sites, raising questions that airborne releases of BPA may influence nearby surface water contamination and may represent a previously underestimated source to the environment and potential for human exposure. Estrogen and androgen receptor activities of surface water samples were predictive of wastewater input, although the lower sensitivity of the ethinylestradiol ELISA relative to the very high sensitivity of the bioassay approaches did not allow a direct comparison. Wastewater-influenced sites also had elevated anti-estrogenic and anti-androgenic equivalence, while sites without wastewater discharges exhibited no antagonist activities.

  3. BiVO4 {010} and {110} Relative Exposure Extent: Governing Factor of Surface Charge Population and Photocatalytic Activity.

    PubMed

    Tan, Hui Ling; Wen, Xiaoming; Amal, Rose; Ng, Yun Hau

    2016-04-01

    The {010} and {110} crystal facets of monoclinic bismuth vanadate (m-BiVO4) has been demonstrated to be the active reduction and oxidation sites, respectively. Here, we show using dual-faceted m-BiVO4 with distinctly different dominant exposed facets, one which is {010}-dominant and the other {110}-dominant, contrary to prediction, the former m-BiVO4 exhibits superior photooxidation activities. The population of photogenerated electrons and holes on the surface are revealed to be proportional to the respective surface areas of {010} and {110} exposed on m-BiVO4, as evidenced by steady-state photoluminescence (PL) measurements in the presence of charge scavengers. The better photoactivity of {010}-dominant m-BiVO4 is attributed to prompt electron transfer facilitated by the presence of more photogenerated electrons on the larger {010} surface. Additionally, the greater extent of electron trapping in {110}-dominant m-BiVO4 also deteriorates its photoactivity by inducing electron-hole pair recombination. PMID:27007807

  4. Rate and style of ice stream retreat constrained by new surface-exposure ages: The Minch, NW Scotland

    NASA Astrophysics Data System (ADS)

    Bradwell, Tom; Small, David; Fabel, Derek; Dove, Dayton; Cofaigh, Colm O.; Clark, Chris; Consortium, Britice-Chrono

    2016-04-01

    Chronologically constrained studies of former ice-sheet extents and dynamics are important for understanding past cryospheric responses and modelling future ice-sheet and sea-level change. As part of the BRITICE-CHRONO project, we present new geomorphological and chronological data from a marine-terminating ice stream system in NW Europe that operated during the Late Weichselian Glaciation. A suite of 51 cosmogenic-nuclide exposure ages from ice sheet moraines and glacially transported boulders constrain the maximum extent of the ice sheet on the continental shelf (~28 ka BP) and its subsequent retreat, between ~27 and 16 ka BP, into a large marine embayment (ca. 7000 km2; the Minch, NW Scotland). Recently acquired swath bathymetry and acoustic sub-bottom profiler data reveal several large transverse grounding-zone wedges up to 40 m thick and 5 km wide with diagnostic acoustic-facies architecture. These seabed sediment wedges mark former quasi-stable positions of grounded marine-terminating ice-stream fronts; their size and thickness suggest long-lived stillstands of the order of centuries. Statistically significant clusters of exposure ages from glacial deposits on islands and intervening headlands shed important new light on the age of these marine grounding-zone wedges and, by inference, the rate and timing of Minch palaeo-ice stream retreat. We find strong evidence for episodic ice stream retreat on the continental shelf between ~28-24 ka BP, in the outer Minch between ~24-22 ka BP, and in the central Minch between 22-18.5 ka BP. In contrast, final ice stream deglaciation (<18 ka) across the deepest parts of the inner Minch embayment, was probably rapid and uninterrupted - with the ice sheet margin at or close to the present-day coastline in NW Scotland by 16.1 ka BP. It is hoped that these results will form the empirical basis for future ice-sheet modelling of this dynamically sensitive sector of the British-Irish Ice Sheet.

  5. Nanomechanical and surface properties of rMSCs post-exposure to CAP treated UHMWPE wear particles

    PubMed Central

    Preedy, Emily Callard; Perni, Stefano; Prokopovich, Polina

    2016-01-01

    Wear debris generated by ultra-high molecular weight polyethylene (UHMWPE) used in joint replacement devices has been of concern due to reductions of the implant longevity. Cold atmospheric plasma (CAP) has been used to improve the wear performance of UHMWPE. Our aim was to investigate the elastic and adhesive properties of rat mesenchymal stem cells (rMSCs), through AFM, after exposure to UHMWPE wear debris pre- and post-CAP treatment. The results indicated that the main changes in cell elasticity and spring constant of MSC exposed to wear particles occurred in the first 24 h of contact and the particle concentration from 0.5 to 50 mg/l did not play a significant role. For UHMWPE treated for 7.5 min, with progression of the wear simulation the results of the CAP treated samples were getting closer to the result of untreated samples; while with longer CAP treatment this was not observed. From the Clinical Editor Joint replacements are now common clinical practice. However, the use of ultra-high molecular weight polyethylene (UHMWPE) still poses a concern, due to the presence of wear debris. The authors here investigated the effects of wear debris after cold atmospheric plasma treatment on rat mesenchymal stem cells. The positive results provided new strategies in future design of joint replacement materials. PMID:26554392

  6. Endocrine disrupting chemicals-Linking internal exposure to vitellogenin levels and ovotestis in Abramis brama from Dutch surface waters.

    PubMed

    Reinen, Jelle; Suter, Marc J-F; Vögeli, A Christiane; Fernandez, Mariana F; Kiviranta, Hannu; Eggen, Rik I L; Vermeulen, Nico P E

    2010-11-01

    The exposure of male bream from three Dutch freshwater locations to endocrine disrupting compounds (EDCs) and corresponding effects are described in this study. Fish specimen displaying reproductive disorders associated with high levels of plasma vitellogenin (VTG) concentrations and occurrence of ovotestis (OT) were investigated. To provide information on the full spectrum of EDCs in fish tissue, adipose tissue samples of individual fish were analyzed for nearly 130 chemicals targeting different compound classes (bisphenols, alkylphenols, pesticides, polychlorinated dibenzo-p-dioxins (PCDDs), dibenzofurans (PCDFs), polychlorinated biphenyls (PCBs), hydroxylated polychlorinated biphenyls (OH-PCBs), polybrominated diphenyl ethers (PBDEs) and biphenyls (PBBs)) and steroid hormones. To establish whether tissue from specimen with reproductive disorders shows a spectrum of EDCs that is qualitatively and quantitatively different from that of controls free of symptoms, bioassay-directed fractionation was performed using the recombinant yeast estrogen screen (YES), the E-Screen bioassay, the human sulfotransferase 1E1 (SULT1E1) inhibition assay, and the coumestrol-based estrogen receptor α (ERα) high resolution screening (HRS) assay. No differences in estrogenicity could be observed between the cases and controls and steroidal estrogens accounted for the majority of estrogenicity found in the complex mixtures. In this study, the combination of the different assays employed to measure total estrogenicity and the SULT1E1 inhibition does not predict the outcome of unwanted physiological effects, however, it can be used to determine the presence of EDCs in fish samples and their estrogenic effects. PMID:21787654

  7. Photon-exposure-dependent photon-stimulated desorption for obtaining photolysis cross section of molecules adsorbed on surface by monochromatic soft x-ray photons.

    PubMed

    Chou, L-C; Jang, C-Y; Wu, Y-H; Tsai, W-C; Wang, S-K; Chen, J; Chang, S-C; Liu, C-C; Shai, Y; Wen, C-R

    2008-12-01

    Photon-exposure-dependent positive- and negative-ion photon-stimulated desorption (PSD) was proposed to study the photoreactions and obtain the photolysis cross sections of molecules adsorbed on a single-crystal surface by monochromatic soft x-ray photons with energy near the core level of adsorbate. The changes in the F(+) and F(-) PSD ion yields were measured from CF(3)Cl molecules adsorbed on Si(111)-7x7 at 30 K (CF(3)Cl dose=0.3x10(15) molecules/cm(2), approximately 0.75 monolayer) during irradiation of monochromatic soft x-ray photons near the F(1s) edge. The PSD ion yield data show the following characteristics: (a) The dissociation of adsorbed CF(3)Cl molecules is due to a combination of direct photodissociation via excitation of F(1s) core level and substrate-mediated dissociation [dissociative attachment and dipolar dissociation induced by the photoelectrons emitting from the silicon substrate]. (b) the F(+) ion desorption is associated with the bond breaking of the surface CF(3)Cl, CF(2)Cl, CFCl, and SiF species. (c) the F(-) yield is mainly due to DA and DD of the adsorbed CF(3)Cl molecules. (d) The surface SiF is formed by reaction of the surface Si atom with the neutral fluorine atom, F(+), or F(-) ion produced by scission of C-F bond of CF(3)Cl, CF(2)Cl, or CFCl species. A kinetic model was proposed for the explanation of the photolysis of this submonolayer CF(3)Cl-covered surface. Based on this model and the variation rates of the F(+)F(-) signals during fixed-energy monochromatic photon bombardment at 690.2 and 692.6 eV [near the F(1s) edge], the photolysis cross section was deduced as a function of energy. PMID:19063541

  8. Binding and surface exposure characteristics of the gonococcal transferrin receptor are dependent on both transferrin-binding proteins.

    PubMed Central

    Cornelissen, C N; Sparling, P F

    1996-01-01

    Neisseria gonorrhoeae is capable of iron utilization from human transferrin in a receptor-mediated event. Transferrin-binding protein 1 (Tbp1) and Tbp2 have been implicated in transferrin receptor function, but their specific roles in transferrin binding and transferrin iron utilization have not yet been defined. We utilized specific gonococcal mutants lacking Tbp1 or Tbp2 to assess the relative transferrin-binding properties of each protein independently of the other. The apparent affinities of the wild-type transferrin receptor and of Tbp1 and Tbp2 individually were much higher than previously estimated for the gonococcal receptor and similar to the estimates for the mammalian transferrin receptor. The binding parameters of both of the mutants were distinct from those of the parent, which expressed two transferrin-binding sites. Tbp2 discriminated between ferrated transferrin and apotransferrin, while Tbp1 did not. Results of transferrin-binding affinity purification, and protease accessibility experiments were consistent with the hypothesis that Tbp1 and Tbp2 interact in the wild-type strain, although both proteins were capable of binding to transferrin independently when separated in the mutants. The presence of Tbp1 partially protected Tbp2 from trypsin proteolysis, and Tbp2 also protected Tbp1 from trypsin exposure. Addition of transferrin to wild-type but not mutant cells protected Tbp1 from trypsin but increased the trypsin susceptibility of Tbp2. These observations indicate that Tbp1 and Tbp2 function together in the wild-type strain to evoke binding conformations that are distinct from those expressed by the mutants lacking either protein. PMID:8631722

  9. Exposure of the yeast Saccharomyces cerevisiae to functionalized polystyrene latex nanoparticles: influence of surface charge on toxicity.

    PubMed

    Nomura, Toshiyuki; Miyazaki, Jumpei; Miyamoto, Akihisa; Kuriyama, Yuta; Tokumoto, Hayato; Konishi, Yasuhiro

    2013-04-01

    Novel nanoparticles with unique physicochemical characteristics are being developed with increasing frequency, leading to higher probability of nanoparticle release and environmental accumulation. Therefore, it is important to assess the potential environmental and biological adverse effects of nanoparticles. In this study, we investigated the toxicity and behavior of surface-functionalized nanoparticles toward yeast (Saccharomyces cerevisiae). The colony count method and confocal microscopy were used to examine the cytotoxicity of manufactured polystyrene latex (PSL) nanoparticles with various functional groups (amine, carboxyl, sulfate, and nonmodified). S. cerevisiae were exposed to PSL nanoparticles (40 mg/L) dispersed in 5-154 mM NaCl solutions for 1 h. Negatively charged nanoparticles had little or no toxic effect. Interestingly, nanoparticles with positively charged amine groups (p-Amine) were not toxic in 154 mM NaCl, but highly toxic in 5 mM NaCl. Confocal microscopy indicated that in 154 mM NaCl, the p-Amine nanoparticles were internalized by endocytosis, whereas in 5 mM NaCl they covered the dead cell surfaces. This demonstrates that nanoparticle-induced cell death might to be related to their adhesion to cells rather than their internalization. Together, these findings identify important factors in determining nanoparticle toxicity that might affect their impact on the environment and human health. PMID:23448545

  10. Surface Exposure of the HIV-1 Env Cytoplasmic Tail LLP2 Domain during the Membrane Fusion Process

    PubMed Central

    Lu, Lu; Zhu, Yun; Huang, Jinghe; Chen, Xi; Yang, Hengwen; Jiang, Shibo; Chen, Ying-Hua

    2008-01-01

    HIV-1 gp41 cytoplasmic tail (CT) is highly conserved among HIV-1 isolates, particularly the region designated lentivirus lytic peptide (LLP1–2), which includes two α-helical domains LLP1 and LLP2. Although the gp41 CT is recognized as a modulator of viral fusogenicity, little is known about the regulatory mechanism of this region in the viral fusion process. Here we report that anti-LLP1–2 and anti-LLP2 antibodies (IgG) inhibited HIV-1 Env-mediated cell fusion and bound to the interface between effector and target cells at a suboptimal temperature (31.5 °C), which slows down the fusion process and prolongs the fusion intermediate state. This suggests that LLP1–2, especially the LLP2 region located inside the viral membrane, is transiently exposed on the membrane surface during the fusion process. Synthetic LLP2 peptide could bind to the gp41 six-helix bundle core with high binding affinity. These results suggest that the gp41 CT may interact with the gp41 core, via the surface-exposed LLP2 domain, to regulate Env-mediated membrane fusion. PMID:18408000

  11. Effects Investigated of Ambient High-Temperature Exposure on Alumina-Titania High-Emittance Surfaces for Solar Dynamic Systems

    NASA Technical Reports Server (NTRS)

    deGroh, Kim K.; Smith, Daniela C.

    1999-01-01

    Solar-dynamic space power systems require durable, high-emittance surfaces on a number of critical components, such as heat receiver interior surfaces and parasitic load radiator (PLR) elements. An alumina-titania coating, which has been evaluated for solar-dynamic heat receiver canister applications, has been chosen for a PLR application (an electrical sink for excess power from the turboalternator/compressor) because of its demonstrated high emittance and high-temperature durability in vacuum. Under high vacuum conditions (+/- 10(exp -6) torr), the alumina-titania coating was found to be durable at temperatures of 1520 F (827 C) for approx. 2700 hours with no degradation in optical properties. This coating has been successfully applied to the 2-kW solar-dynamic ground test demonstrator at the NASA Lewis Research Center, to the 500 thermal-energy-storage containment canisters inside the heat receiver and to the PLR radiator. The solar-dynamic demonstrator has successfully operated for over 800 hours in Lewis large thermal/vacuum space environment facility, demonstrating the feasibility of solar-dynamic power generation for space applications.

  12. Altered Traffic of Cardiolipin during Apoptosis: Exposure on the Cell Surface as a Trigger for “Antiphospholipid Antibodies”

    PubMed Central

    Manganelli, Valeria; Capozzi, Antonella; Recalchi, Serena; Signore, Michele; Mattei, Vincenzo; Garofalo, Tina; Misasi, Roberta; Degli Esposti, Mauro; Sorice, Maurizio

    2015-01-01

    Apoptosis has been reported to induce changes in the remodelling of membrane lipids; after death receptor engagement, specific changes of lipid composition occur not only at the plasma membrane, but also in intracellular membranes. This paper focuses on one important aspect of apoptotic changes in cellular lipids, namely, the redistribution of the mitochondria-specific phospholipid, cardiolipin (CL). CL predominantly resides in the inner mitochondrial membrane, even if the rapid remodelling of its acyl chains and the subsequent degradation occur in other membrane organelles. After death receptor stimulation, CL appears to concentrate into mitochondrial “raft-like” microdomains at contact sites between inner and outer mitochondrial membranes, leading to local oligomerization of proapoptotic proteins, including Bid. Clustering of Bid in CL-enriched contacts sites is interconnected with pathways of CL remodelling that intersect membrane traffic routes dependent upon actin. In addition, CL association with cytoskeleton protein vimentin was observed. Such novel association also indicated that CL molecules may be expressed at the cell surface following apoptotic stimuli. This observation adds a novel implication of biomedical relevance. The association of CL with vimentin at the cell surface may represent a “new” target antigen in the context of the apoptotic origin of anti-vimentin/CL autoantibodies in Antiphospholipid Syndrome. PMID:26491702

  13. Short- and Long-Term Effects of Prenatal Exposure to Iron Oxide Nanoparticles: Influence of Surface Charge and Dose on Developmental and Reproductive Toxicity

    PubMed Central

    Di Bona, Kristin R.; Xu, Yaolin; Gray, Marquita; Fair, Douglas; Hayles, Hunter; Milad, Luckie; Montes, Alex; Sherwood, Jennifer; Bao, Yuping; Rasco, Jane F.

    2015-01-01

    Iron oxide nanoparticles (NPs) are commonly utilized for biomedical, industrial, and commercial applications due to their unique properties and potential biocompatibility. However, little is known about how exposure to iron oxide NPs may affect susceptible populations such as pregnant women and developing fetuses. To examine the influence of NP surface-charge and dose on the developmental toxicity of iron oxide NPs, Crl:CD1(ICR) (CD-1) mice were exposed to a single, low (10 mg/kg) or high (100 mg/kg) dose of positively-charged polyethyleneimine-Fe2O3-NPs (PEI-NPs), or negatively-charged poly(acrylic acid)-Fe2O3-NPs (PAA-NPs) during critical windows of organogenesis (gestation day (GD) 8, 9, or 10). A low dose of NPs, regardless of charge, did not induce toxicity. However, a high exposure led to charge-dependent fetal loss as well as morphological alterations of the uteri (both charges) and testes (positive only) of surviving offspring. Positively-charged PEI-NPs given later in organogenesis resulted in a combination of short-term fetal loss (42%) and long-term alterations in reproduction, including increased fetal loss for second generation matings (mice exposed in utero). Alternatively, negatively-charged PAA-NPs induced fetal loss (22%) earlier in organogenesis to a lesser degree than PEI-NPs with only mild alterations in offspring uterine histology observed in the long-term. PMID:26694381

  14. In vitro bioaccessibility of lead in surface dust and implications for human exposure: A comparative study between industrial area and urban district.

    PubMed

    Bi, Xiangyang; Li, Zhonggen; Sun, Guangyi; Liu, Jinling; Han, Zhixuan

    2015-10-30

    In this study, ground surface dust samples from two contrasting areas, a former zinc smelting area in Guizhou Province and a common urban district in Wuhan city, Hubei Province, China, were assessed for in vitro Pb bioaccessibility using a physiologically based extraction test (PBET). Extremely elevated concentrations of Pb (220-6348 mg/kg) and other trace metals were observed in the zinc smelting area. While moderate high metal concentrations (79-1544 mg/kg of Pb) in the urban dusts were attributed to various urban activities, coal combustion and traffic emissions. Lead bioaccessibility in the stomach-phase varied from 17.6 to 76.1% and no significant difference was found between industrial and urban dust samples. Compared with the stomach-phase, Pb bioaccessibility in the more alkaline intestinal-phase was considerably lower (1.2-21.8%). A significantly negative correlation was found between dust Ca concentrations and Pb bioaccessibility in the intestinal-phase, suggesting that Ca plays an important role in reducing the bioaccessible Pb in the intestinal-phase. The estimated Pb exposure based on gastric bioaccessible Pb was 13.9 and 1.8 μg/kg day for children living in the industrial and urban areas, respectively, accounting for 85% and 41% of their corresponding total Pb exposure. PMID:25958267

  15. Short- and Long-Term Effects of Prenatal Exposure to Iron Oxide Nanoparticles: Influence of Surface Charge and Dose on Developmental and Reproductive Toxicity.

    PubMed

    Di Bona, Kristin R; Xu, Yaolin; Gray, Marquita; Fair, Douglas; Hayles, Hunter; Milad, Luckie; Montes, Alex; Sherwood, Jennifer; Bao, Yuping; Rasco, Jane F

    2015-01-01

    Iron oxide nanoparticles (NPs) are commonly utilized for biomedical, industrial, and commercial applications due to their unique properties and potential biocompatibility. However, little is known about how exposure to iron oxide NPs may affect susceptible populations such as pregnant women and developing fetuses. To examine the influence of NP surface-charge and dose on the developmental toxicity of iron oxide NPs, Crl:CD1(ICR) (CD-1) mice were exposed to a single, low (10 mg/kg) or high (100 mg/kg) dose of positively-charged polyethyleneimine-Fe₂O₃-NPs (PEI-NPs), or negatively-charged poly(acrylic acid)-Fe₂O₃-NPs (PAA-NPs) during critical windows of organogenesis (gestation day (GD) 8, 9, or 10). A low dose of NPs, regardless of charge, did not induce toxicity. However, a high exposure led to charge-dependent fetal loss as well as morphological alterations of the uteri (both charges) and testes (positive only) of surviving offspring. Positively-charged PEI-NPs given later in organogenesis resulted in a combination of short-term fetal loss (42%) and long-term alterations in reproduction, including increased fetal loss for second generation matings (mice exposed in utero). Alternatively, negatively-charged PAA-NPs induced fetal loss (22%) earlier in organogenesis to a lesser degree than PEI-NPs with only mild alterations in offspring uterine histology observed in the long-term. PMID:26694381

  16. Vaccine potential of meningococcal FrpB: studies on surface exposure and functional attributes of common epitopes.

    PubMed

    Ala'Aldeen, D A; Davies, H A; Borriello, S P

    1994-05-01

    Neisseria meningitidis expresses several novel outer membrane proteins (OMPs) in vivo and when grown under iron limitation in vitro. One of the most prominent is a 70 kDa iron-regulated protein (FrpB). FrpB was purified by elution from SDS-polyacrylamide gels and rabbit polyclonal antiserum (R-70) was raised against it. R-70 was bactericidal against homologous, but not heterologous, strains in the presence of human complement. The bactericidal activity was retained when R-70 was adsorbed with formaldehyde-fixed iron-replete cells (i.e. not expressing FrpB), but lost when absorbed with fixed iron-restricted cells (which express FrpB). A murine monoclonal anti-FrpB antibody (mAb M70) was raised against a common epitope which showed complete cross-reaction on Western blots of OMPs from other serogroups and serotypes of N. meningitidis and some commensal Neisseriae species. However, it failed to kill the organism. Immunogold electron microscopy on ultrathin sections, using the R-70 antiserum adsorbed with fixed iron-replete cells, showed labelling on 40% of the cells, whereas the R-70 adsorbed with fixed iron-restricted cells and mAb M70 failed to label. However, none of these sera labelled whole cells, suggesting lack of surface accessibility. It appears that the highly conserved cross-reactive epitopes of FrpB only become exposed in the process of generating the antigen, whereas the surface-exposed epitopes recognized in killing assays are immunologically variable among different strains.(ABSTRACT TRUNCATED AT 250 WORDS) PMID:7518627

  17. Surface exposure dating of Holocene basalt flows and cinder cones in the Kula volcanic field (western Turkey) using cosmogenic 3He and 10Be

    NASA Astrophysics Data System (ADS)

    Heineke, Caroline; Niedermann, Samuel; Hetzel, Ralf; Akal, Cüneyt

    2015-04-01

    The Kula volcanic field is the youngest volcanic province in western Anatolia and covers an area of about 600 km2 around the town Kula (Richardson-Bunbury, 1996). Its alkali basalts formed by melting of an isotopically depleted mantle in a region of long-lived continental extension and asthenospheric upwelling (Prelevic et al., 2012). Based on morphological criteria and 40Ar/39Ar dating, four phases of Quaternary activity have been distinguished in the Kula volcanic field (Richardson-Bunbury, 1996; Westaway et al., 2006). The youngest lava flows are thought to be Holocene in age, but so far only one sample from this group was dated by 40Ar/39Ar at 7±2 ka (Westaway et al., 2006). In this study, we analysed cosmogenic 3He in olivine phenocrysts from three basalt flows and one cinder cone to resolve the Holocene history of volcanic eruptions in more detail. In addition, we applied 10Be exposure dating to two quartz-bearing xenoliths found at the surface of one flow and at the top of one cinder cone. The exposure ages fall in the range between ~500 and ~3000 years, demonstrating that the youngest volcanic activity is Late Holocene in age and therefore distinctly younger than previously envisaged. Our results show that the Late Holocene lava flows are not coeval but formed over a period of a few thousand years. We conclude that surface exposure dating of very young volcanic rocks provides a powerful alternative to 40Ar/39Ar dating. References Prelevic, D., Akal, C. Foley, S.F., Romer, R.L., Stracke, A. and van den Bogaard, P. (2012). Ultrapotassic mafic rocks as geochemical proxies for post-collisional dynamics of orogenic lithospheric mantle: the case of southwestern Anatolia, Turkey. Journal of Petrology, 53, 1019-1055. Richardson-Bunbury, J.M. (1996). The Kula Volcanic Field, western Turkey: the development of a Holocene alkali basalt province and the adjacent normal-faulting graben. Geological Magazine, 133, 275-283. Westaway, R., Guillou, H., Yurtmen, S., Beck, A

  18. Cosmogenic Surface-Exposure Age Limits for Latest-Pleistocene Glaciation and Paleoclimatic Inferences in the American Fork Canyon, Wasatch Mountains, Utah, U.S.A.

    NASA Astrophysics Data System (ADS)

    Laabs, B. J.; Bash, E. R.; Refsnider, K. A.; Becker, R. A.; Munroe, J. S.; Mickelson, D. M.; Singer, B. S.

    2007-12-01

    The Wasatch Mountains of north-central Utah bordered the eastern shore of Lake Bonneville and were occupied by numerous valley glaciers during the latest Pleistocene. Stratigraphic and morphostratigraphic observations near the mouths of Little Cottonwood and Bells Canyons reveal that glaciers in these two valleys began constructing terminal moraines before Lake Bonneville reached its maximum shoreline elevation at about 19-17 cal. ka. Although the chronology of the lake highstand is well constrained by numerous radiocarbon dates, the timing of deglaciation in the Wasatch Mountains is relatively unclear. Moreover, there is considerable disagreement over the climatic conditions (cold/dry vs. cool/wet) that led to the expansion of glaciers and the lake. To address these issues, we explore the glacial record in the American Fork canyon by combining field mapping with cosmogenic 10Be surface-exposure dating and numerical modeling of glacier mass balance and ice flow to limit the extent, timing and climate of the last glaciation in the Wasatch Mountains. Six of ten cosmogenic surface-exposure ages from a terminal moraine in the canyon are tightly clustered (ranging from 14.4 ± 1.3 to 15.2 ± 1.1 ka; 2σ analytical error) and yield an error-weighted mean age of 14.8 ± 0.4 ka (2σ, MSWD = 0.26; individual age calculations based on a high latitude/sea level production rate of 4.98 ± 0.34 atoms g SiO2-1 yr-1 scaled for elevation and latitude). This age is consistent with previously reported cosmogenic-exposure dates from elsewhere in the range, and suggests that ice retreat in the Wasatch Mountains began as much as 4 kyr later than in other Rocky Mountain ranges and was in phase with the hydrologic fall of Lake Bonneville from the Provo shoreline. Numerical glacier modeling experiments (based on methods of Plummer and Phillips, 2003) simulate maximum ice extent in the American Fork, Little Cottonwood and Dry Creek canyons under a broad range of potential temperature and

  19. Global crop yield reductions due to surface ozone exposure: 2. Year 2030 potential crop production losses and economic damage under two scenarios of O 3 pollution

    NASA Astrophysics Data System (ADS)

    Avnery, Shiri; Mauzerall, Denise L.; Liu, Junfeng; Horowitz, Larry W.

    2011-04-01

    We examine the potential global risk of increasing surface ozone (O 3) exposure to three key staple crops (soybean, maize, and wheat) in the near future (year 2030) according to two trajectories of O 3 pollution: the Intergovernmental Panel on Climate Change Special Report on Emissions Scenarios (IPCC SRES) A2 and B1 storylines, which represent upper- and lower-boundary projections, respectively, of most O 3 precursor emissions in 2030. We use simulated hourly O 3 concentrations from the Model for Ozone and Related Chemical Tracers version 2.4 (MOZART-2), satellite-derived datasets of agricultural production, and field-based concentration:response relationships to calculate crop yield reductions resulting from O 3 exposure. We then calculate the associated crop production losses and their economic value. We compare our results to the estimated impact of O 3 on global agriculture in the year 2000, which we assessed in our companion paper [Avnery et al., 2011]. In the A2 scenario we find global year 2030 yield loss of wheat due to O 3 exposure ranges from 5.4 to 26% (a further reduction in yield of +1.5-10% from year 2000 values), 15-19% for soybean (reduction of +0.9-11%), and 4.4-8.7% for maize (reduction of +2.1-3.2%) depending on the metric used, with total global agricultural losses worth 17-35 billion USD 2000 annually (an increase of +6-17 billion in losses from 2000). Under the B1 scenario, we project less severe but still substantial reductions in yields in 2030: 4.0-17% for wheat (a further decrease in yield of +0.1-1.8% from 2000), 9.5-15% for soybean (decrease of +0.7-1.0%), and 2.5-6.0% for maize (decrease of + 0.3-0.5%), with total losses worth 12-21 billion annually (an increase of +1-3 billion in losses from 2000). Because our analysis uses crop data from the year 2000, which likely underestimates agricultural production in 2030 due to the need to feed a population increasing from approximately 6 to 8 billion people between 2000 and 2030, our

  20. Heparin increases the infectivity of Human Papillomavirus Type 16 independent of cell surface proteoglycans and induces L1 epitope exposure

    PubMed Central

    Cerqueira, Carla; Liu, Yan; Kühling, Lena; Chai, Wengang; Hafezi, Wali; van Kuppevelt, Toin H.; Kühn, Joachim E.; Feizi, Ten; Schelhaas, Mario

    2016-01-01

    Summary Human Papillomaviruses (HPVs) are the etiological agents of cervical cancer, and HPV-16 is the most prevalent type. Several HPVs require heparan sulfate proteoglycans (HSPGs) for cell-binding. Here, we analyze the phenomenon that preincubation of HPV-16 with increasing concentrations of heparin results in partial restoration rather than more efficient inhibition of infection. While corroborating that the HSPGs are cell-binding receptors for HPV-16, heparin-preincubated virus bound to the extracellular matrix (ECM) via laminin-332. Furthermore, the interaction of virions with heparin, a representative of the highly sulfated S-domains of heparan sulfate (HS) chains of HSPGs, allowed HPV-16 infection in the absence of cell surface HSPGs. Therefore, we concluded that specific glycan moieties but not specific HSPG protein backbones are required for infection. The increased binding of an epitope-specific antibody to the viral capsid after heparin-binding suggested that initial conformational changes in the HPV-16 virion occur during infection by interaction with ‘heparin-like’ domains of cellular HSPGs. We propose that HS sequences with specific sulfation patterns are required to facilitate HPV-16 infection. PMID:23601855

  1. Antigenicity, cross-reactivity and surface exposure of the Neisseria meningitidis 37 kDa protein (Fbp).

    PubMed

    Gómez, J A; Agra, C; Ferrón, L; Powell, N; Pintor, M; Criado, M T; Ferreirós, C M

    1996-10-01

    The 37 kDa iron-repressible protein, Fbp, was purified from two Neisseria meningitidis strains by metal-affinity chromatography and used to obtain mouse monospecific polyclonal immune sera. Dot-blot, immunoblotting and whole cell ELISA results demonstrate that the Fbp is present in all 16 N. meningitidis and four commensal Neisseria species tested, is highly antigenic in mouse when injected in pure form, and shows intra- and inter-species antigenic homogeneity, anti-Fbp antibodies being fully cross-reactive using the techniques mentioned. We also found that Fbp molecules (or parts of them) are surface exposed, in disagreement with the proposed exclusively periplasmic localization, although anti-Fbp antibodies seem unable to block iron uptake or to induce complement-mediated killing of the meningococci. Taken along with the high immunogenicity of the purified protein and the complete cross-reactivity of the antibodies elicited, this suggests that the protective effect of the purified Fbp must be further studied to evaluate its inclusion in future vaccine trials. PMID:9004443

  2. Exposure assessment for U.S. surface waters using a deterministic model (ROUT) and visualization by GIS

    SciTech Connect

    Dyer, S.D.; Cowan, C.E.; Rapaport, R.A.; Caprara, R.J.

    1994-12-31

    ROUT is a deterministic modeling system that predicts chemical concentrations in rivers and streams that receive discharges from POTWs system also predicts drinking water intake concentrations. Over 500,000 river miles are systematically routed through the 18 major hydrologic regions of the continental US. The system uses several US EPA databases (Needs-POTW File, IFD, REACH, RCHPUB, GAGE and DRINKS). Predicted concentrations in river reaches and drinking water intakes come from loads to 11,500 POTWs which discharge to surface waters. ROUT outputs include statistical distributions of concentration by river mile and by population for drinking water facilities as well as hard copy reports of selected portions of detailed output data. A GIS (geographical information system, ARC-INFO/ARCVIEW) interface was coupled to ROUT to provide readily interpretable visualizations of the geographic influences on ROUT outputs. Concentration distributions for river reaches were determined for each US county. Effects of loading factor and biodegradation rates on ROUT/GIS outputs and their role in risk assessment will be discussed.

  3. Heparin increases the infectivity of Human Papillomavirus type 16 independent of cell surface proteoglycans and induces L1 epitope exposure.

    PubMed

    Cerqueira, Carla; Liu, Yan; Kühling, Lena; Chai, Wengang; Hafezi, Wali; van Kuppevelt, Toin H; Kühn, Joachim E; Feizi, Ten; Schelhaas, Mario

    2013-11-01

    Human Papillomaviruses (HPVs) are the etiological agents of cervical cancer, and HPV-16 is the most prevalent type. Several HPVs require heparan sulfate proteoglycans (HSPGs) for cell binding. Here, we analyse the phenomenon that preincubation of HPV-16 with increasing concentrations of heparin results in partial restoration rather than more efficient inhibition of infection. While corroborating that the HSPGs are cell-binding receptors for HPV-16, heparin-preincubated virus bound to the extracellular matrix (ECM) via laminin-332. Furthermore, the interaction of virions with heparin, a representative of the highly sulfated S-domains of heparan sulfate (HS) chains of HSPGs, allowed HPV-16 infection in the absence of cell surface HSPGs. Therefore, we concluded that specific glycan moieties but not specific HSPG protein backbones are required for infection. The increased binding of an epitope-specific antibody to the viral capsid after heparin binding suggested that initial conformational changes in the HPV-16 virion occur during infection by interaction with'heparin-like' domains of cellular HSPGs. We propose that HS sequences with specific sulfation patterns are required to facilitate HPV-16 infection. PMID:23601855

  4. Nano silver and nano zinc-oxide in surface waters - exposure estimation for Europe at high spatial and temporal resolution.

    PubMed

    Dumont, Egon; Johnson, Andrew C; Keller, Virginie D J; Williams, Richard J

    2015-01-01

    Nano silver and nano zinc-oxide monthly concentrations in surface waters across Europe were modeled at ~6 x 9 km spatial resolution. Nano-particle loadings from households to rivers were simulated considering household connectivity to sewerage, sewage treatment efficiency, the spatial distribution of sewage treatment plants, and their associated populations. These loadings were used to model temporally varying nano-particle concentrations in rivers, lakes and wetlands by considering dilution, downstream transport, water evaporation, water abstraction, and nano-particle sedimentation. Temporal variability in concentrations caused by weather variation was simulated using monthly weather data for a representative 31-year period. Modeled concentrations represent current levels of nano-particle production.Two scenarios were modeled. In the most likely scenario, half the river stretches had long-term average concentrations exceeding 0.002 ng L(-1) nano silver and 1.5 ng L(-1) nano zinc oxide. In 10% of the river stretches, these concentrations exceeded 0.18 ng L(-1) and 150 ng L(-1), respectively. Predicted concentrations were usually highest in July. PMID:25463731

  5. Rapid exposure assessment of PSII herbicides in surface water using a novel chlorophyll a fluorescence imaging assay.

    PubMed

    Muller, Renee; Schreiber, Ulrich; Escher, Beate I; Quayle, Pamela; Bengtson Nash, Susan M; Mueller, Jochen F

    2008-08-15

    Recently a new Maxi-Imaging-PAM (Max-I-PAM) instrument for phytotoxicity assessment via chlorophyll fluorescence imaging was introduced. This new instrument allows rapid detection of the effects of PS II inhibiting herbicides which are high use agricultural chemicals frequently detected in surface waters in Australia and elsewhere. Several studies have applied the new instrument for detection of phytotoxicants in water using microalgae suspensions; however, these use preliminary protocols and to date no validated method is available for high throughput testing of environmental samples in 96-well plates. Here we developed and applied a new protocol allowing dose-response assessment of four samples within 2 h (8 dilutions in duplicate). The technique was found to be sensitive, with a detection limit of 2.3 ng l(-1) for the herbicide diuron when testing solid phase extracts (SPE) of 1000 ml water samples, and reproducible both between experiments (coefficient of variation (CV)=0.30) and within the 96-well plate (CV=0.06). Relative potencies were determined for four reference PS II impacting herbicides (diuron>hexazinone>atrazine>simazine). Extracts from 1000 ml environmental samples and diuron spiked ultrapure water as well as passive sampler extracts were evaluated and good agreement was found between diuron equivalent concentrations calculated from bioassay results (DEQ(IPAM)) and DEQ(CHEM) values calculated from LCMS chemical analysis of the four reference compounds in the same samples. Overall, the technique provides a valuable bioanalytical tool for rapid and inexpensive effects-based assessment of PS II impacting herbicides in environmental mixtures. PMID:18501956

  6. Long duration measurements of whole-body vibration exposures associated with surface coal mining equipment compared to previous short-duration measurements.

    PubMed

    Burgess-Limerick, Robin; Lynas, Danellie

    2016-01-01

    Previous measurements of whole-body vibration associated with earth-moving equipment at surface coal mines have highlighted the significance of the hazard. Considerable variability in measurement amplitudes, even within the same equipment type operated at the same site, has been noted. However, the measurements have previously been undertaken for relatively short durations. Fifty-nine measurements were collected from a range of earth-moving equipment in operation at a surface coal mine. Measurement durations ranged from 100-460 min (median = 340 min). The results indicate that the measurements previously observed are not an artifact of the relatively short durations and confirm that operators of dozers and off-road haul trucks, in particular, are frequently exposed to vertical whole-body vibration levels which lie within, or above, the Health Guidance Caution Zone defined by ISO2631.1. Further investigations are justified to identify opportunities for reducing operators' exposure to high amplitude vibrations. PMID:26771238

  7. Ferromagnetic resonance and magnetic studies of cores 60009/60010 and 60003 - Compositional and surface-exposure stratigraphy. [of Apollo deep drill lunar samples

    NASA Technical Reports Server (NTRS)

    Morris, R. V.; Gose, W. A.

    1976-01-01

    Ferromagnetic resonance and static magnetic measurements were made on 131 samples from core 60009/60010 and on 40 samples from section 60003 of the Apollo 16 deep drill core. These studies provided depth profiles for composition, in terms of the concentration of FeO, and relative surface exposure age (or maturity), in terms of the values of the specific FMR intensity normalized to the FeO content. For core 60009/60010, the concentration of FeO ranged from about 1.6 wt.% to 5.8 wt.% with a mean value of 4.6 wt.% and the maturity ranged from immature to mature with most of the soils being submature. A systematic decrease in maturity from the lunar surface to a depth of about 12.5 cm was observed in core section 60010. For core section 60003, the concentration of FeO ranged from about 5.2 wt.% to 7.5 wt.% with a mean value of 6.4 wt.% and the maturity ranged from submature to mature with most of the soils being mature.

  8. Skeletal dosimetry for external exposures to photons based on {mu}CT images of spongiosa: Consideration of voxel resolution, cluster size, and medullary bone surfaces

    SciTech Connect

    Kramer, R.; Khoury, H. J.; Vieira, J. W.; Brown, K. A. Robson

    2009-11-15

    Skeletal dosimetry based on {mu}CT images of trabecular bone has recently been introduced to calculate the red bone marrow (RBM) and the bone surface cell (BSC) equivalent doses in human phantoms for external exposure to photons. In order to use the {mu}CT images for skeletal dosimetry, spongiosa voxels in the skeletons were replaced at run time by so-called micromatrices, which have exactly the size of a spongiosa voxel and contain segmented trabecular bone and marrow microvoxels. A cluster (=parallelepiped) of 2x2x2=8 micromatrices was used systematically and periodically throughout the spongiosa volume during the radiation transport calculation. Systematic means that when a particle leaves a spongiosa voxel to enter into a neighboring spongiosa voxel, then the next micromatrix in the cluster will be used. Periodical means that if the particle travels through more than two spongiosa voxels in a row, then the cluster will be repeated. Based on the bone samples available at the time, clusters of up to 3x3x3=27 micromatrices were studied. While for a given trabecular bone volume fraction the whole-body RBM equivalent dose showed converging results for cluster sizes between 8 and 27 micromatrices, this was not the case for the BSC equivalent dose. The BSC equivalent dose seemed to be very sensitive to the number, form, and thickness of the trabeculae. In addition, the cluster size and/or the microvoxel resolution were considered to be possible causes for the differences observed. In order to resolve this problem, this study used a bone sample large enough to extract clusters containing up to 8x8x8=512 micromatrices and which was scanned with two different voxel resolutions. Taking into account a recent proposal, this investigation also calculated the BSC equivalent dose on medullary surfaces of cortical bone in the arm and leg bones. The results showed (1) that different voxel resolutions have no effect on the RBM equivalent dose but do influence the BSC equivalent

  9. Photon-exposure-dependent photon-stimulated desorption for obtaining photolysis cross section of molecules adsorbed on surface by monochromatic soft x-ray photons

    SciTech Connect

    Chou, L.-C.; Jang, C.-Y.; Wu, Y.-H.; Tsai, W.-C.; Wang, S.-K.; Chen, J.; Chang, S.-C.; Liu, C.-C.; Shai, Y.; Wen, C.-R.

    2008-12-07

    Photon-exposure-dependent positive- and negative-ion photon-stimulated desorption (PSD) was proposed to study the photoreactions and obtain the photolysis cross sections of molecules adsorbed on a single-crystal surface by monochromatic soft x-ray photons with energy near the core level of adsorbate. The changes in the F{sup +} and F{sup -} PSD ion yields were measured from CF{sub 3}Cl molecules adsorbed on Si(111)-7x7 at 30 K (CF{sub 3}Cl dose=0.3x10{sup 15} molecules/cm{sup 2}, {approx}0.75 monolayer) during irradiation of monochromatic soft x-ray photons near the F(1s) edge. The PSD ion yield data show the following characteristics: (a) The dissociation of adsorbed CF{sub 3}Cl molecules is due to a combination of direct photodissociation via excitation of F(1s) core level and substrate-mediated dissociation [dissociative attachment and dipolar dissociation induced by the photoelectrons emitting from the silicon substrate]. (b) the F{sup +} ion desorption is associated with the bond breaking of the surface CF{sub 3}Cl, CF{sub 2}Cl, CFCl, and SiF species. (c) the F{sup -} yield is mainly due to DA and DD of the adsorbed CF{sub 3}Cl molecules. (d) The surface SiF is formed by reaction of the surface Si atom with the neutral fluorine atom, F{sup +}, or F{sup -} ion produced by scission of C-F bond of CF{sub 3}Cl, CF{sub 2}Cl, or CFCl species. A kinetic model was proposed for the explanation of the photolysis of this submonolayer CF{sub 3}Cl-covered surface. Based on this model and the variation rates of the F{sup +}/F{sup -} signals during fixed-energy monochromatic photon bombardment at 690.2 and 692.6 eV[near the F(1s) edge], the photolysis cross section was deduced as a function of energy.

  10. Proteomic screening identifies calreticulin as a miR-27a direct target repressing MHC class I cell surface exposure in colorectal cancer

    PubMed Central

    Colangelo, T; Polcaro, G; Ziccardi, P; Pucci, B; Muccillo, L; Galgani, M; Fucci, A; Milone, M R; Budillon, A; Santopaolo, M; Votino, C; Pancione, M; Piepoli, A; Mazzoccoli, G; Binaschi, M; Bigioni, M; Maggi, C A; Fassan, M; Laudanna, C; Matarese, G; Sabatino, L; Colantuoni, V

    2016-01-01

    Impairment of the immune response and aberrant expression of microRNAs are emerging hallmarks of tumour initiation/progression, in addition to driver gene mutations and epigenetic modifications. We performed a preliminary survey of independent adenoma and colorectal cancer (CRC) miRnoma data sets and, among the most dysregulated miRNAs, we selected miR-27a and disclosed that it is already upregulated in adenoma and further increases during the evolution to adenocarcinoma. To identify novel genes and pathways regulated by this miRNA, we employed a differential 2DE-DIGE proteome analysis. We showed that miR-27a modulates a group of proteins involved in MHC class I cell surface exposure and, mechanistically, demonstrated that calreticulin is a miR-27a direct target responsible for most downstream effects in epistasis experiments. In vitro miR-27a affected cell proliferation and angiogenesis; mouse xenografts of human CRC cell lines expressing different miR-27a levels confirmed the protein variations and recapitulated the cell growth and apoptosis effects. In vivo miR-27a inversely correlated with MHC class I molecules and calreticulin expression, CD8+ T cells infiltration and cytotoxic activity (LAMP-1 exposure and perforin release). Tumours with high miR-27a, low calreticulin and CD8+ T cells' infiltration were associated with distant metastasis and poor prognosis. Our data demonstrate that miR-27a acts as an oncomiRNA, represses MHC class I expression through calreticulin downregulation and affects tumour progression. These results may pave the way for better diagnosis, patient stratification and novel therapeutic approaches. PMID:26913609

  11. Dermal exposure assessment techniques.

    PubMed

    Fenske, R A

    1993-12-01

    Exposure of the skin to chemical substances can contribute significantly to total dose in many workplace situations, and its relative importance will increase when airborne occupational exposure limits are reduced, unless steps to reduce skin exposure are undertaken simultaneously. Its assessment employs personal sampling techniques to measure skin loading rates, and combines these measurements with models of percutaneous absorption to estimate absorbed dose. Knowledge of dermal exposure pathways is in many cases fundamental to hazard evaluation and control. When the skin is the primary contributor to absorbed dose, dermal exposure measurements and biological monitoring play complementary roles in defining occupational exposures. Exposure normally occurs by one of three pathways: (i) immersion (direct contact with a liquid or solid chemical substance); (ii) deposition of aerosol or uptake of vapour through the skin; or (iii) surface contact (residue transfer from contaminated surfaces). Sampling methods fall into three categories: surrogate skin; chemical removal; and fluorescent tracers. Surface sampling represents a supplementary approach, providing an estimate of dermal exposure potential. Surrogate skin techniques involve placing a chemical collection medium on the skin. Whole-body garment samplers do not require assumptions relating to distribution, an inherent limitation of patch sampling. The validity of these techniques rests on the ability of the sampling medium to capture and retain chemicals in a manner similar to skin. Removal techniques include skin washing and wiping, but these measure only what can be removed from the skin, not exposure: laboratory removal efficiency studies are required for proper interpretation of data. Fluorescent tracer techniques exploit the visual properties of fluorescent compounds, and combined with video imaging make quantification of dermal exposure patterns possible, but the need to introduce a chemical substance (tracer

  12. Recombinant Treponema pallidum rare outer membrane protein 1 (Tromp1) expressed in Escherichia coli has porin activity and surface antigenic exposure.

    PubMed Central

    Blanco, D R; Champion, C I; Exner, M M; Shang, E S; Skare, J T; Hancock, R E; Miller, J N; Lovett, M A

    1996-01-01

    We recently reported the cloning and sequencing of the gene encoding a 31-kDa Treponema pallidum subsp. pallidum rare outer membrane porin protein, designated Tromp1 (D. R. Blanco, C. I. Champion, M. M. Exner, H. Erdjument-Bromage, R. E. W. Hancock, P. Tempst, J. N. Miller, and M. A. Lovett, J. Bacteriol. 177:3556-3562, 1995). Here, we report the stable expression of recombinant Tromp1 (rTromp1) in Escherichia coli. rTromp1 expressed without its signal peptide and containing a 22-residue N-terminal fusion resulted in high-level accumulation of a nonexported soluble protein that was purified to homogeneity by fast protein liquid chromatography (FPLC). Specific antiserum generated to the FPLC-purified rTromp1 fusion identified on immunoblots of T. pallidum the native 31-kDa Tromp1 protein and two higher-molecular-mass oligomeric forms of Tromp1 at 55 and 80 kDa. rTromp1 was also expressed with its native signal peptide by using an inducible T7 promoter. Under these conditions, rTromp1 fractionated predominantly with the E. coli soluble and outer membrane fractions, but not with the inner membrane fraction. rTromp1 isolated from the E. coli outer membrane and reconstituted into planar lipid bilayers showed porin activity based on average single-channel conductances of 0.4 and 0.8 nS in 1 M KCl. Whole-mount immunoelectron microscopy using infection-derived immune serum against T. pallidum indicated that rTromp1 was surface exposed when expressed in E. coli. These findings demonstrate that rTromp1 can be targeted to the E. coli outer membrane, where it has both porin activity and surface antigenic exposure. PMID:8955283

  13. A comparative assessment of PM2.5 exposures in light-rail, subway, freeway, and surface street environments in Los Angeles and estimated lung cancer risk.

    PubMed

    Kam, Winnie; Delfino, Ralph J; Schauer, James J; Sioutas, C

    2013-01-01

    According to the U.S. Census Bureau, 570000+ commuters in Los Angeles travel for over 60 minutes to work. Studies have shown that a substantial portion of particulate matter (PM) exposure can occur during this commute. This study represents the integration of the results from five commute environments in Los Angeles. Personal PM exposures are discussed for the: (1) METRO gold line, a ground-level light-rail route, (2) METRO red line, a subway line, (3) the 110, a high volume freeway with low heavy-duty vehicle (HDV) fraction, (4) the 710, a major corridor for HDVs from the Port of Los Angeles, and (5) Wilshire/Sunset Boulevards, major surface streets. Chemical analysis including total and water-soluble metals and trace elements, elemental and organic carbon (EC/OC), and polycyclic aromatic hydrocarbons (PAHs) was performed. The focus of this study is to compare the composition and estimated lung cancer risk of PM2.5 (dp < 2.5 μm) for the five differential commute environments. Metals associated with stainless steel, notably Fe, Cr, and Mn, were elevated for the red line (subway), most likely from abrasion processes between the rail and brakes; elements associated with tire and brake wear and oil additives (Ca, Ti, Sn, Sb, and Pb) were elevated on roadways. Elemental concentrations on the gold line (light-rail) were the lowest. For water-solubility, metals observed on the red line (subway) were the least soluble. PAHs are primarily derived from vehicular emissions. Overall, the 710 exhibited high levels of PAHs (3.0 ng m−3), most likely due to its high volume of HDVs, while the red and gold lines exhibited low PAH concentrations (0.6 and 0.8 ng m−3 for red and gold lines, respectively). Lastly, lung cancer risk due to inhalation of PAHs was calculated based on a commuter lifetime (45 years for 2 hours per workday). Results showed that lung cancer risk for the 710 is 3.8 and 4.5 times higher than the light-rail (gold line) and subway (red line), respectively

  14. The deglaciation history of the Simplon region (southern Swiss Alps) constrained by 10Be exposure dating of ice-molded bedrock surfaces

    NASA Astrophysics Data System (ADS)

    Dielforder, Armin; Hetzel, Ralf

    2014-01-01

    The deglaciation history of the Swiss Alps after the Last Glacial Maximum involved the decay of several ice domes and the subsequent disintegration of valley glaciers at high altitude. Here we use bedrock exposure dating to reconstruct the temporal and spatial pattern of ice retreat at the Simplon Pass (altitude: ˜2000 m) located 40 km southwest of the 'Rhône ice dome'. Eleven 10Be exposure ages from glacially polished quartz veins and ice-molded bedrock surfaces cluster tightly between 13.5 ± 0.6 ka and 15.4 ± 0.6 ka (internal errors) indicating that the Simplon Pass depression became ice-free at 14.1 ± 0.4 ka (external error of mean age). This age constraint is interpreted to record the melting of the high valley glaciers in the Simplon Pass region during the warm Bølling-Allerød interstadial shortly after the Oldest Dryas stadial. Two bedrock samples collected a few hundred meters above the pass depression yield older 10Be ages of 17.8 ± 0.6 ka and 18.0 ± 0.6 ka. These ages likely reflect the initial downwasting of the Rhône ice dome and the termination of the ice transfluence from the ice dome across the Simplon Pass toward the southern foreland. There, the retreat of the piedmont glacier in Val d'Ossola was roughly synchronous with the decay of the Rhône ice dome in the interior of the mountain belt, as shown by 10Be ages of 17.7 ± 0.9 ka and 16.1 ± 0.6 ka for a whaleback at ˜500 m elevation near Montecrestese in northern Italy. In combination with well-dated paleoclimate records derived from lake sediments, our new age data suggest that during the deglaciation of the European Alps the decay of ice domes was approximately synchronous with the retreat of piedmont glaciers in the foreland and was followed by the melting of high-altitude valley glaciers after the transition from the Oldest Dryas to the Bølling-Allerød, when mean annual temperatures rose rapidly by ˜3 °C.

  15. Response-surface analysis of exposure-duration relationships: the effects of hyperthermia on embryonic development of the rat in vitro.

    PubMed

    Kimmel, G L; Williams, P L; Claggett, T W; Kimmel, C A

    2002-10-01

    In developing exposure standards, an assumption is often made in the case of less-than-lifetime exposures that the probability of response depends on the cumulative exposure, i.e., the product of exposure concentration and duration. Over the last two decades, the general applicability of this assumption, referred to as Haber's Law, has begun to be questioned. This study examined the interaction of exposure concentration and duration on embryonic development during a portion of organogenesis. Embryos were exposed in whole embryo culture to various temperature-duration combinations and evaluated for alterations in development 24 h later. The specific purpose of the study was to assess whether the developmental responses followed Haber's Law, or whether an additional component of exposure was needed to model the relationship. The current study demonstrated that the response of the developing embryo to hyperthermia, with rare exception, was dependent on an additional component of exposure beyond the cumulative exposure. For the vast majority of the parameters measured in this study, the probability of an effect was greater at higher temperatures for short durations than at lower temperatures for long durations, given the same cumulative exposure. Thus, Haber's Law did not adequately describe the results of our study. PMID:12377988

  16. Pleistocene glaciations of Central Asia: results from 10Be surface exposure ages of erratic boulders from the Pamir (Tajikistan), and the Alay Turkestan range (Kyrgyzstan)

    NASA Astrophysics Data System (ADS)

    Abramowski, U.; Bergau, A.; Seebach, D.; Zech, R.; Glaser, B.; Sosin, P.; Kubik, P. W.; Zech, W.

    2006-05-01

    We have determined the timing of glaciations in the Pamir (Tajikistan) and the Alay-Turkestan Range (Kyrgyzstan) using 10Be surface exposure dating. Glacial advances in the area have occurred >93-136, ˜60-80, (40-55), ˜27-25, ˜22-20, ˜19-17, ˜16-15, ˜15-13, and 11-9 cal ka BP. All Late Pleistocene glaciers in the Pamir, and the Alay-Turkestan Ranges have been valley glaciers except for the most extended glaciers on the Pamir plateau, which have formed local piedmont glaciations. In the eastern Pamir, these are characterized by ELA depressions of ˜370-380 m (THAR 0.5). In the Turkestan Range and Alay Range, ELA depressions at the same time were >750 and 600 m, respectively. Late Pleistocene glacier advances all over western High Asia were contemporaneous with climatic cold phases rather than monsoonal maxima. Their maximum extent and that of the western hemisphere ice sheets were asynchronous, due to increasing aridity in the region over the course of the Last Glacial. Late Pleistocene climate in Central Asia seems to have been influenced by the interplay of the westerly circulation and the Siberian anticyclone. Some indirect monsoonal influence in the eastern Pamir may be responsible for the existence of some of the Lateglacial moraine stages in this area. High altitude glaciers seem to have reached their maximum extent earlier (MIS 5-4) than low altitude glaciers (first half of MIS 3), possibly due to prolonged glacial aridity imparting with moisture advection onto high altitude sites, inducing glacial retreat, but prolonged cold during the same time imparting with glacier ablation at lower altitude sites, inducing glacial advance.

  17. National Spatiotemporal Exposure Surface for NO2: Monthly Scaling of a Satellite-Derived Land-Use Regression, 2000-2010.

    PubMed

    Bechle, Matthew J; Millet, Dylan B; Marshall, Julian D

    2015-10-20

    Land-use regression (LUR) is widely used for estimating within-urban variability in air pollution. While LUR has recently been extended to national and continental scales, these models are typically for long-term averages. Here we present NO2 surfaces for the continental United States with excellent spatial resolution (∼100 m) and monthly average concentrations for one decade. We investigate multiple potential data sources (e.g., satellite column and surface estimates, high- and standard-resolution satellite data, and a mechanistic model [WRF-Chem]), approaches to model building (e.g., one model for the whole country versus having separate models for urban and rural areas, monthly LURs versus temporal scaling of a spatial LUR), and spatial interpolation methods for temporal scaling factors (e.g., kriging versus inverse distance weighted). Our core approach uses NO2 measurements from U.S. EPA monitors (2000-2010) to build a spatial LUR and to calculate spatially varying temporal scaling factors. The model captures 82% of the spatial and 76% of the temporal variability (population-weighted average) of monthly mean NO2 concentrations from U.S. EPA monitors with low average bias (21%) and error (2.4 ppb). Model performance in absolute terms is similar near versus far from monitors, and in urban, suburban, and rural locations (mean absolute error 2-3 ppb); since low-density locations generally experience lower concentrations, model performance in relative terms is better near monitors than far from monitors (mean bias 3% versus 40%) and is better for urban and suburban locations (1-6%) than for rural locations (78%, reflecting the relatively clean conditions in many rural areas). During 2000-2010, population-weighted mean NO2 exposure decreased 42% (1.0 ppb [∼5.2%] per year), from 23.2 ppb (year 2000) to 13.5 ppb (year 2010). We apply our approach to all U.S. Census blocks in the contiguous United States to provide 132 months of publicly available, high

  18. Surface exposure chronology of the Waimakariri glacial sequence in the Southern Alps of New Zealand: Implications for MIS-2 ice extent and LGM glacial mass balance

    NASA Astrophysics Data System (ADS)

    Rother, Henrik; Shulmeister, James; Fink, David; Alexander, David; Bell, David

    2015-11-01

    During the late Quaternary, the Southern Alps of New Zealand experienced multiple episodes of glaciation with large piedmont glaciers reaching the coastal plains in the west and expanding into the eastern alpine forelands. Here, we present a new 10Be exposure age chronology for a moraine sequence in the Waimakariri Valley (N-Canterbury), which has long been used as a reference record for correlating glacial events across New Zealand and the wider Southern Hemisphere. Our data indicate that the Waimakariri glacier reached its maximum last glaciation extent prior to ∼26 ka well before the global last glaciation maximum (LGM). This was followed by a gradual reduction in ice volume and the abandonment of the innermost LGM moraines at about 17.5 ka. Significantly, we find that during its maximum extent, the Waimakariri glacier overflowed the Avoca Plateau, previously believed to represent a mid-Pleistocene glacial surface (i.e. MIS 8). At the same time, the glacier extended to a position downstream of the Waimakariri Gorge, some 15 km beyond the previously mapped LGM ice limit. We use a simple steady-state mass balance model to test the sensitivity of past glacial accumulation to various climatic parameters, and to evaluate possible climate scenarios capable of generating the ice volume required to reach the full local-LGM extent. Model outcomes indicate that under New Zealand's oceanic setting, a cooling of 5 °C, assuming modern precipitation levels, or a cooling of 6.5 °C, assuming a one third reduction in precipitation, would suffice to drive the Waimakariri glacier to the eastern alpine forelands (Canterbury Plains). Our findings demonstrate that the scale of LGM glaciation in the Waimakariri Valley and adjacent major catchments, both in terms of ice volume and downvalley ice extent, has been significantly underestimated. Our observation that high-lying glacial surfaces, so far believed to represent much older glacial episodes, were glaciated during the LGM

  19. Military Exposures

    MedlinePlus

    ... Index Agent Orange Agent Orange Home Facts about Herbicides Veterans' Diseases Birth Defects Benefits Exposure Locations Provider ... for Providers Diagnosis and Treatment of Exposure Health Effects More Provider Resources » return to top Get Email ...

  20. Exposure assessment of trichloroethylene.

    PubMed Central

    Wu, C; Schaum, J

    2000-01-01

    This article reviews exposure information available for trichloroethylene (TCE) and assesses the magnitude of human exposure. The primary sources releasing TCE into the environment are metal cleaning and degreasing operations. Releases occur into all media but mostly into the air due to its volatility. It is also moderately soluble in water and can leach from soils into groundwater. TCE has commonly been found in ambient air, surface water, and groundwaters. The 1998 air levels in microg/m(3) across 115 monitors can be summarized as follows: range = 0.01-3.9, mean = 0.88. A California survey of large water utilities in 1984 found a median concentration of 3.0 microg/L. General population exposure to TCE occurs primarily by inhalation and water ingestion. Typical average daily intakes have been estimated as 11-33 microg/day for inhalation and 2-20 microg/day for ingestion. A small portion of the population is expected to have elevated exposures as a result of one or more of these pathways: inhalation exposures to workers involved in degreasing operations, ingestion and inhalation exposures occurring in homes with private wells located near disposal/contamination sites, and inhalation exposures to consumers using TCE products in areas of poor ventilation. More current and more extensive data on TCE levels in indoor air, water, and soil are needed to better characterize the distribution of background exposures in the general population and elevated exposures in special subpopulations. Images Figure 1 PMID:10807565

  1. Microorganism and Organic Biomarker Survival as a Function of Depth in a Mars Analog Regolith after Exposure to Mars Surface Conditions

    NASA Astrophysics Data System (ADS)

    Johnson, A. P.; Onstott, T. C.; Pratt, L. M.; Pfiffner, S.; Vishnivetskaya, T. A.; Bryan, R. A.; White, L.; Radtke, K.; Chan, E.; Tronnick, S.; Borgonie, G.; Mancinelli, R.; Rothschild, L.; Rogoff, D.

    2010-03-01

    Microorganism and relevant biomarkers were exposed to several weeks of simulated martian conditions while embedded within a synthetic Mars analog regolith. Survival of organisms and biomarkers was related to burial depth and UV exposure with time.

  2. Does C-C bonding proceed during exposure of adequate metal surfaces to CH{sub 4}? Reply to {open_quotes}Comment by Z. Hlavathy, Z. Paal, and P. Tetenyi{close_quotes}

    SciTech Connect

    Amaraiglio, A.; Pareja, P.; Amariglio, H.

    1997-02-01

    The comments, results, and reflections presented by Hlavathy and co-workers in their Letter aim at demonstrating that C-C bonding between CH{sub x} adspecies, formed upon exposure of Pt to CH{sub 4}, can proceed as well during the exposure itself as during further exposure to H{sub 2}. This possibility was implicitly put forward because they thought that a tight parallelism exists between the interactions of CH{sub 4} and CO with a metal surface, provided that the exposure to CH{sub 4} is carried out at a high enough temperature (450{degrees}C). In both cases these authors assumed that three kinds of carbon, C{sub {alpha}}, C{sub {beta}}, and C{sub {gamma}}, can be formed, C{sub {alpha}} being the main species responsible for the production of CH{sub 4} and of the C{sub 2}, alkanes obtained when the metal was further contacted with H{sub 2} at 100{degrees}C. As they argued that C{sub {alpha}} (also named carbidic carbon) has only metal atoms in its first coordination shell, they were implicitly led it that C-C bonding must take place during the hydrogenation step. The authors have not denied this possibility, but they have suggested that different situations can result from exposures to CH{sub 4} conducted at temperatures much lower than those used by Koerts et al.. 13 refs.

  3. Cosmic-ray Exposure Ages of Meteorites

    NASA Astrophysics Data System (ADS)

    Herzog, G. F.

    2003-12-01

    The classic idea of a cosmic-ray exposure (CRE) age for a meteorite is based on a simple but useful picture of meteorite evolution, the one-stage irradiation model. The precursor rock starts out on a parent body, buried under a mantle of material many meters thick that screens out cosmic rays. At a time ti, a collision excavates a precursor rock - a "meteoroid." The newly liberated meteoroid, now fully exposed to cosmic rays, orbits the Sun until a time tf, when it strikes the Earth, where the overlying blanket of air (and possibly of water or ice) again shuts out almost all cosmic rays (cf. Masarik and Reedy, 1995). The quantity tf-ti is called the CRE age, t. To obtain the CRE age of a meteorite, we measure the concentrations in it of one or more cosmogenic nuclides (Table 1), which are nuclides that cosmic rays produce by inducing nuclear reactions. Many shorter-lived radionuclides excluded from Table 1 such as 22Na (t1/2=2.6 yr) and 60Co (t1/2=5.27 yr) can also furnish valuable information, but can be measured only in meteorites that fell within the last few half-lives of those nuclides (see, e.g., Leya et al. (2001) and references therein). Table 1. Cosmogenic nuclides used for calculating exposure ages NuclideHalf-lifea (Myr) Radionuclides 14C0.005730 59Ni0.076 41Ca0.1034 81Kr0.229 36Cl0.301 26Al0.717 10Be1.51 53Mn3.74 129I15.7 Stable nuclides 3He 21Ne 38Ar 83Kr 126Xe a http://www2.bnl.gov/ton. CRE ages have implications for several interrelated questions. From how many different parent bodies do meteorites come? How well do meteorites represent the population of the asteroid belt? How many distinct collisions on each parent body have created the known meteorites of each type? How often do asteroids collide? How big and how energetic were the collisions that produced meteoroids? What factors control the CRE age of a meteorite and how do meteoroid orbits evolve through time? We will touch on these questions below as we examine the data.By 1975, the CRE ages of

  4. Climatic and topographic controls on the style and timing of Late Quaternary glaciation throughout Tibet and the Himalaya defined by 10Be cosmogenic radionuclide surface exposure dating

    USGS Publications Warehouse

    Owen, L.A.; Finkel, R.C.; Barnard, P.L.; Haizhou, Ma; Asahi, K.; Caffee, M.W.; Derbyshire, E.

    2005-01-01

    Temporal and spatial changes in glacier cover throughout the Late Quaternary in Tibet and the bordering mountains are poorly defined because of the inaccessibility and vastness of the region, and the lack of numerical dating. To help reconstruct the timing and extent of glaciation throughout Tibet and the bordering mountains, we use geomorphic mapping and 10Be cosmogenic radionuclide (CRN) surface dating in study areas in southeastern (Gonga Shan), southern (Karola Pass) and central (Western Nyainqentanggulha Shan and Tanggula Shan) Tibet, and we compare these with recently determined numerical chronologies in other parts of the plateau and its borderlands. Each of the study regions receives its precipitation mainly during the south Asian summer monsoon when it falls as snow at high altitudes. Gonga Shan receives the most precipitation (>2000 mm a-1) while, near the margins of monsoon influence, the Karola Pass receives moderate amounts of precipitation (500-600 mm a-1) and, in the interior of the plateau, little precipitation falls on the western Nyainqentanggulha Shan (???300 mm a -1) and the Tanggula Shan (400-700 mm a-1). The higher precipitation values for the Tanggula Shan are due to strong orographic effects. In each region, at least three sets of moraines and associated landforms are preserved, providing evidence for multiple glaciations. The 10Be CRN surface exposure dating shows that the formation of moraines in Gonga Shan occurred during the early-mid Holocene, Neoglacial and Little Ice Age, on the Karola Pass during the Lateglacial, Early Holocene and Neoglacial, in the Nyainqentanggulha Shan date during the early part of the last glacial cycle, global Last Glacial Maximum and Lateglacial, and on the Tanggula Shan during the penultimate glacial cycle and the early part of the last glacial cycle. The oldest moraine succession in each of these regions varies from the early Holocene (Gonga Shan), Lateglacial (Karola Pass), early Last Glacial (western

  5. Particle exposures and infections.

    PubMed

    Ghio, A J

    2014-06-01

    Particle exposures increase the risk for human infections. Particles can deposit in the nose, pharynx, larynx, trachea, bronchi, and distal lung and, accordingly, the respiratory tract is the system most frequently infected after such exposure; however, meningitis also occurs. Cigarette smoking, burning of biomass, dust storms, mining, agricultural work, environmental tobacco smoke (ETS), wood stoves, traffic-related emissions, gas stoves, and ambient air pollution are all particle-related exposures associated with an increased risk for respiratory infections. In addition, cigarette smoking, burning of biomass, dust storms, mining, and ETS can result in an elevated risk for tuberculosis, atypical mycobacterial infections, and meningitis. One of the mechanisms for particle-related infections includes an accumulation of iron by surface functional groups of particulate matter (PM). Since elevations in metal availability are common to every particle exposure, all PM potentially contributes to these infections. Therefore, exposures to wood stove emissions, diesel exhaust, and air pollution particles are predicted to increase the incidence and prevalence of tuberculosis, atypical mycobacterial infections, and meningitis, albeit these elevations are likely to be small and detectable only in large population studies. Since iron accumulation correlates with the presence of surface functional groups and dependent metal coordination by the PM, the risk for infection continues as long as the particle is retained. Subsequently, it is expected that the cessation of exposure will diminish, but not totally reverse, the elevated risk for infection. PMID:24488331

  6. Photoacclimation to long-term ultraviolet radiation exposure of natural sub-Antarctic phytoplankton communities: Fixed surface incubations versus mixed mesocosms.

    PubMed

    Hernando, Marcelo; Schloss, Irene; Roy, Suzanne; Ferreyra, Gustavo

    2006-01-01

    Solar UVB radiation (280-320 nm) is known to have detrimental effects on marine phytoplankton. Associated with the seasonal ozone hole in Antarctica, stratospheric ozone depletion occasionally influences the sub-Antarctic (Beagle Channel, Argentina) region, enhancing levels of UVB. The primary objective of this work was to study the effects of several (i.e. 6-10) days of exposure to UVB on the taxonomic composition and photosynthetic inhibition of local phytoplankton communities. For different light treatments, fixed-depth incubations placed in an outdoors water tank were compared with incubations in 1900 L mesocosms, where vertical mixing was present. Phytoplankton growth was inhibited by UV radiation (UVR) in fixed-depth experiments but not in the mixed mesocosms. Under fixed and mixed conditions alike, photosynthesis was significantly inhibited by UVB at the beginning of the experiment but no longer after several days of exposure, suggesting that cells had acclimated to radiation conditions. There was a change in species composition in response to UVR exposure in both experiments, which likely explained acclimation. In the community exposed to fixed conditions this change was from a phytoflagellate-dominated assemblage to a community with high relative abundance of diatoms after 6 days of exposure. UVA was responsible for most of the observed growth inhibition; however, the reduction in photosynthesis was produced by UVB. The reasons behind this variability in responses to UVR are associated with species-specific sensitivity and acclimation, and the previous light history of cells. In the community exposed in mesocosms, an assemblage codominated by phytoflagellates and diatoms was observed at the beginning of the experiments. After 10 days of exposure, green algae (Eutreptiella sp.) had increased, and phytoflagellates were the dominant group. The synthesis of mycosporine-like amino acids (MAAs), antioxidant enzymes and photosynthetic antenna pigments, in

  7. Exposure history of the Sutter's Mill carbonaceous chondrite

    NASA Astrophysics Data System (ADS)

    Nishiizumi, K.; Caffee, M. W.; Hamajima, Y.; Reedy, R. C.; Welten, K. C.

    2014-11-01

    The Sutter's Mill (SM) carbonaceous chondrite fell in California on April 22, 2012. The cosmogenic radionuclide data indicate that Sutter's Mill was exposed to cosmic rays for 0.082 ± 0.008 Myr, which is one of the shortest ages for C chondrites, but overlaps with a small cluster at approximately 0.1 Myr. The age is significantly longer than proposed ages that were obtained from cosmogenic noble gas concentrations, which have large uncertainties due to trapped noble gas corrections. The presence of neutron-capture 60Co and 36Cl in SM indicates a minimum preatmospheric radius of approximately 50 cm, and is consistent with a radius of 1-2 m, as derived from the fireball observations. Although a large preatmospheric size was proposed, one fragment (SM18) contains solar cosmic ray-produced short-lived radionuclides, such as 56Co and 51Cr. This implies that this specimen was less than 2 cm from the preatmospheric surface of Sutter's Mill. Although this conclusion seems surprising, it is consistent with the observation that the meteoroid fragmented high in the atmosphere. The presence of SCR-produced nuclides is consistent with the high SCR fluxes observed during the last few months before the meteorite's fall, when its orbit was less than 1 AU from the Sun.

  8. Generation of surface waves and low-frequency radiation under exposure of a conductor to a laser pulse focused by a cylindrical lens

    SciTech Connect

    Uryupin, S A; Frolov, A A

    2014-09-30

    We have developed a theory of generation of low-frequency radiation and surface waves under the pondermotive action of a femtosecond laser pulse irradiating a conductor along the normal and focused by a cylindrical lens. It is shown that for the chosen focusing method and specified values of laser pulse duration and flux density it is possible to significantly increase the total energy of both surface waves and low-frequency radiation. (terahertz radiation)

  9. The effect of light exposure on the degradation of latent fingerprints on brass surfaces: the use of silver electroless deposition as a visualization technique.

    PubMed

    Payne, Imogen C; McCarthy, Imogen; Almond, Matthew J; Baum, John V; Bond, John W

    2014-09-01

    We have studied the degradation of sebaceous fingerprints on brass surfaces using silver electroless deposition (SED) as a visualization technique. We have stored fingerprints on brass squares either (i) in a locked dark cupboard or (ii) in glass-filtered natural daylight for periods of 3 h, 24 h, 1 week, 3 weeks, and 6 weeks. We find that fingerprints on brass surfaces degrade much more rapidly when kept in the light than they do under dark conditions with a much higher proportion of high-quality prints found after 3 or 6 weeks of aging when stored in the dark. This process is more marked than for similar fingerprints on black PVC surfaces. Identifiable prints can be achieved on brass surfaces using both SED and cyanoacrylate fuming (CFM). SED is quick and straightforward to perform. CFM is more time-consuming but is versatile and can be applied to a wider range of metal surfaces than SED, for example brass surfaces which have been coated by a lacquer. PMID:25182300

  10. Using exterior building surface films to assess human exposure and health risks from PCDD/Fs in New York City, USA, after the World Trade Center attacks.

    PubMed

    Rayne, Sierra

    2005-12-01

    Concentrations of tetra- through octa-chlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) were determined in exterior window films from Manhattan and Brooklyn in New York City (NYC), USA, 6 weeks after the World Trade Center (WTC) attacks of 11 September 2001. High concentrations of the 2,3,7,8-substituted congeners (P(2378)CDD/Fs) were observed, at levels up to 6600 pg-TEQ g(-1) nearest the WTC site. An equilibrium partitioning model was developed to reconstruct total gas + particle-phase atmospheric concentrations of P(2378)CDD/Fs at each site. The reconstructed atmospheric and window film concentrations were subsequently used in a preliminary human health risk assessment to estimate the potential cancer and non-cancer risks posed to residents of lower Manhattan from these contaminants over the 6 week exposure period between the WTC attacks and sampling dates. Residents of lower Manhattan appear to have a slightly elevated cancer risk (up to 1.6% increase over background) and increased P(2378)CDD/F body burden (up to 8.0% increase over background) because of above-background exposure to high concentrations of P(2378)CDD/Fs produced from the WTC attacks during the short period between 11 September 2001, and window film sampling 6 weeks later. PMID:16314211

  11. Inhibition of Viability, Proliferation, Cytokines Secretion, Surface Antigen Expression, and Adipogenic and Osteogenic Differentiation of Adipose-Derived Stem Cells by Seven-Day Exposure to 0.5 T Static Magnetic Fields

    PubMed Central

    Wang, Jian; Xiang, Bo; Deng, Jixian; Freed, Darren H.; Arora, Rakesh C.; Tian, Ganghong

    2016-01-01

    After seven-day exposure to 0.5-Tesla Static Magnetic Field (SMF), Adipose-derived Stem Cells (ASCs) and those labeled by superparamagnetic iron oxide (SPIO) nanoparticles were examined for viability by methyl thiazol tetrazolium (MTT) assay, proliferation by cell counting and bromodeoxyuridine (BrdU) incorporation, DNA integrity by single cell gel electrophoresis, surface antigen by flow cytometry analysis, and the expression of cytokines and genetic markers by reverse transcription-PCR and underwent adipogenic and osteogenic differentiation assessed by quantifying related specific genes expression. The SMF slightly reduced cell viability and proliferation and inhibited the expression of CD49d, CD54, and CD73 but did not damage DNA integrity. The SMF slightly downregulated the expression of cytokines including Vascular Endothelial Growth Factor (VEGF), Insulin-like Growth Factor-1 (IGF-1), Transforming Growth Factor Beta 1 (TGF-β1), genetic markers comprising Stem Cell Antigen-1 (Sca1), Octamer-4 (Oct-4), ATP-binding Cassette Subfamily B Member 1 (ABCB1), adipogenic marker genes containing Lipoprotein Lipase (LPL), Peroxisome Proliferator-Activated Receptor Gamma (PPAR-γ), and osteogenic marker genes including Secreted Phosphor-protein 1 (SPP1) and Osterix (OSX). Exposure to 0.5 T SMF for seven days inhibited viability, proliferation, surface antigen expression, cytokine secretion, stem cell genetic marker expression, and adipogenic and osteogenic differentiation but did not affect the DNA integrity in ASCs with or without SPIO labeling. PMID:26880984

  12. East Antarctic deglaciation and the link to global cooling during the Quaternary: evidence from glacial geomorphology and 10Be surface exposure dating of the Sør Rondane Mountains, Dronning Maud Land

    NASA Astrophysics Data System (ADS)

    Suganuma, Yusuke; Miura, Hideki; Zondervan, Albert; Okuno, Jun'ichi

    2014-08-01

    Reconstructing past variability of the Antarctic ice sheets is essential to understand their stability and to anticipate their contribution to sea level change as a result of future climate change. Recent studies have reported a significant decrease in thickness of the East Antarctic Ice Sheet (EAIS) during the last several million years. However, the geographical extent of this decrease and subsequent isostatic rebound remain uncertain. In this study, we reconstruct the magnitude and timing of ice sheet retreat at the Sør Rondane Mountains in Dronning Maud Land, East Antarctica, based on detailed geomorphological survey, cosmogenic exposure dating, and glacial isostatic adjustment modeling. Three distinct deglaciation phases are identified for this sector during the Quaternary, based on rock weathering and 10Be surface exposure data. We estimate that the ice sheet thinned by at least 500 m during the Pleistocene. This thinning is attributed to the reorganization of Southern Ocean circulation associated with global cooling into the Pleistocene, which reduced the transport of moisture from the Southern Ocean to the interior of EAIS. The data also show that since the Last Glacial Maximum the ice surface has lowered less than ca 50 m and that this lowering probably started after ca 14 ka. This suggests that the EAIS in Dronning Maud Land is unlikely to have been a major contributor to postglacial sea-level rise and Meltwater pulse 1A.

  13. Inhibition of Viability, Proliferation, Cytokines Secretion, Surface Antigen Expression, and Adipogenic and Osteogenic Differentiation of Adipose-Derived Stem Cells by Seven-Day Exposure to 0.5 T Static Magnetic Fields.

    PubMed

    Wang, Jian; Xiang, Bo; Deng, Jixian; Freed, Darren H; Arora, Rakesh C; Tian, Ganghong

    2016-01-01

    After seven-day exposure to 0.5-Tesla Static Magnetic Field (SMF), Adipose-derived Stem Cells (ASCs) and those labeled by superparamagnetic iron oxide (SPIO) nanoparticles were examined for viability by methyl thiazol tetrazolium (MTT) assay, proliferation by cell counting and bromodeoxyuridine (BrdU) incorporation, DNA integrity by single cell gel electrophoresis, surface antigen by flow cytometry analysis, and the expression of cytokines and genetic markers by reverse transcription-PCR and underwent adipogenic and osteogenic differentiation assessed by quantifying related specific genes expression. The SMF slightly reduced cell viability and proliferation and inhibited the expression of CD49d, CD54, and CD73 but did not damage DNA integrity. The SMF slightly downregulated the expression of cytokines including Vascular Endothelial Growth Factor (VEGF), Insulin-like Growth Factor-1 (IGF-1), Transforming Growth Factor Beta 1 (TGF-β1), genetic markers comprising Stem Cell Antigen-1 (Sca1), Octamer-4 (Oct-4), ATP-binding Cassette Subfamily B Member 1 (ABCB1), adipogenic marker genes containing Lipoprotein Lipase (LPL), Peroxisome Proliferator-Activated Receptor Gamma (PPAR-γ), and osteogenic marker genes including Secreted Phosphor-protein 1 (SPP1) and Osterix (OSX). Exposure to 0.5 T SMF for seven days inhibited viability, proliferation, surface antigen expression, cytokine secretion, stem cell genetic marker expression, and adipogenic and osteogenic differentiation but did not affect the DNA integrity in ASCs with or without SPIO labeling. PMID:26880984

  14. Micro- and nano-scale damage on the surface of W divertor component during exposure to high heat flux loads with He

    NASA Astrophysics Data System (ADS)

    Li, C.; Greuner, H.; Zhao, S. X.; Böswirth, B.; Luo, G. N.; Zhou, X.; Jia, Y. Z.; Liu, X.; Liu, W.

    2015-11-01

    Micro- and nano-scale surface damage on a W divertor component sample exposed to high heat flux loads generated with He atoms has been investigated through SEM, EBSD, AFM and FIB-SEM. The component sample was supplied by the Institute of Plasma Physics, Chinese Academy of Sciences (ASIPP) and AT&M company, China, and the loading experiment was performed in the GLADIS facility at IPP Garching, Germany. Two typical damage structures were observed on the surface: the first one is characterized by obvious blisters and some grooves formed from ruptured blisters, and the other one is a kind of porous structure accompanying with at least ∼25 nm surface material loss. As the grain orientation is further away from <111>, the damage morphology gradually changes from the former structure to the latter. The possible damage mechanism is discussed.

  15. Influence of Gas Composition and Exposure Cycle on the Formation of Surface and Subsurface Oxides in Iron-Aluminum-Based Alloys at High Temperatures

    NASA Astrophysics Data System (ADS)

    Bott, June H.; Yin, Hogbin; Sridhar, Seetharaman; Auinger, Michael

    2016-04-01

    The slab reheating process of binary iron-aluminum alloys and an industrial TRIP steel grade has been investigated in both dry and wet atmospheres. The presence of water vapor has a significant effect on the overall scale growth and internal corrosion depth. Heating rate greatly influences the porosity of the surface oxide layer with the surface getting more porous at faster heating rates. Nitride formation could be suppressed in the presence of water vapor, leading to a reduction of internal corrosion depth and a better formability of the final material. Experimental results were compared to thermodynamic predictions and critically discussed.

  16. Influence of Gas Composition and Exposure Cycle on the Formation of Surface and Subsurface Oxides in Iron-Aluminum-Based Alloys at High Temperatures

    NASA Astrophysics Data System (ADS)

    Bott, June H.; Yin, Hogbin; Sridhar, Seetharaman; Auinger, Michael

    2016-08-01

    The slab reheating process of binary iron-aluminum alloys and an industrial TRIP steel grade has been investigated in both dry and wet atmospheres. The presence of water vapor has a significant effect on the overall scale growth and internal corrosion depth. Heating rate greatly influences the porosity of the surface oxide layer with the surface getting more porous at faster heating rates. Nitride formation could be suppressed in the presence of water vapor, leading to a reduction of internal corrosion depth and a better formability of the final material. Experimental results were compared to thermodynamic predictions and critically discussed.

  17. Effect of Alloy Composition, Surface Preparation and Exposure Conditions on the Selective Oxidation Behavior of Ferritic Fe-Cr and Fe-Cr-X Alloy

    SciTech Connect

    Meier, G H; Mu, N; Yanar, N M; Pettit, F S; Piron Abellan, J; Olszewski, T; Quadakkers, W J; Holcomb, G R

    2010-09-01

    Abstract Selective oxidation behavior of ferritic martensitic Fe–Cr base alloys, exposed in various atmospheres containing combinations of O2, CO2, and H2O, were studied at various temperatures relevant to oxy-fuel combustion. This paper begins with a discussion of the required Cr content to form a continuous external chromia scale on a simple binary Fe–Cr alloy exposed in oxygen or air based on experiments and calculations using the classic Wagner model. Then, the effects of the exposure environment and Cr content on the selective oxidation of Fe–Cr alloys are evaluated. Finally, the effects produced by alloying additions of Si, commonly present in various groups of commercially available ferritic steels, are described. The discussion compares the oxide scale formation on simple binary and ternary Fe–Cr base model alloys with that on several commercially available ferritic steels.

  18. Brown Recluse Spider Bite Mediated Hemolysis: Clinical Features, a Possible Role for Complement Inhibitor Therapy, and Reduced RBC Surface Glycophorin A as a Potential Biomarker of Venom Exposure

    PubMed Central

    Gehrie, Eric A.; Nian, Hui; Young, Pampee P.

    2013-01-01

    Background The venom of Loxosceles reclusa (Brown Recluse spider) can cause a severe, life-threatening hemolysis in humans for which no therapy is currently available in the USA beyond supportive measures. Because this hemolysis is uncommon, relatively little is known about its clinical manifestation, diagnosis, or management. Here, we aimed to clarify the clinical details of envenomation, to determine the efficacy of the complement inhibitor eculizumab to prevent the hemolysis in vitro, and to investigate markers of exposure to Brown Recluse venom. Study Design and Methods We performed a 10-year chart review of cases of Brown Recluse spider bite-mediated hemolysis at our institution. We also designed an in vitro assay to test the efficacy of eculizumab to inhibit hemolysis of venom exposed red blood cells. Finally, we compared levels of CD55, CD59 and glycophorin A on venom exposed versus venom-naïve cells. Results Most victims of severe Brown Recluse spider mediated hemolysis at our institution are children and follow an unpredictable clinical course. Brown Recluse spider bite mediated hemolysis is reduced by 79.2% (SD=18.8%) by eculizumab in vitro. Erythrocyte glycophorin A, but not CD55 or CD59, is reduced after red blood cells are incubated with venom in vitro. Conclusion Taken together, our laboratory data and clinical observations indicate that L. reclusa venom exposure results in non-specific antibody and complement fixation on red blood cells, resulting in complement mediated hemolysis that is curtailed by the complement inhibitor eculizumab in vitro. Glycophorin A measurement by flow cytometry may help to identify victims of L. reclusa envenomation. PMID:24086749

  19. DISTRIBUTION OF 2,4-D IN AIR AND ON SURFACES INSIDE RESIDENCES FOLLOWING LAWN APPLICATIONS: COMPARING EXPOSURE ESTIMATES FOR YOUNG CHILDREN FROM VARIOUS MEDIA

    EPA Science Inventory

    Indoor air, surface wipes (floors, table tops and window sills) and floor dust samples were collected at multiple locations within 11 occupied and 2 unoccupied homes both prior to and following lawn application of the herbicide 2,4-D. Residue measurements were made over period...

  20. An investigation of interactions between hypocretin/orexin signaling and glutamate receptor surface expression in the rat nucleus accumbens under basal conditions and after cocaine exposure

    PubMed Central

    Plaza-Zabala, Ainhoa; Li, Xuan; Milovanovic, Mike; Loweth, Jessica A.; Maldonado, Rafael; Berrendero, Fernando; Wolf, Marina E.

    2013-01-01

    Hypocretin peptides are critical for the effects of cocaine on excitatory synaptic strength in the ventral tegmental area (VTA). However, little is known about their role in cocaine-induced synaptic plasticity in the nucleus accumbens (NAc). First, we tested whether hypocretin-1 by itself could acutely modulate glutamate receptor surface expression in the NAc, given that hypocretin-1 in the VTA reproduces cocaine’s effects on glutamate transmission. We found no effect of hypocretin-1 infusion on AMPA or NMDA receptor surface expression in the NAc, measured by biotinylation, either 30 min or 3 h after the infusion. Second, we were interested in whether changes in hypocretin receptor-2 (Hcrtr-2) expression contribute to cocaine-induced plasticity in the NAc. As a first step towards addressing this question, Hcrtr-2 surface expression was compared in the NAc after withdrawal from extended-access self-administration of saline (control) versus cocaine. We found that surface Hcrtr-2 levels remain unchanged following 14, 25 or 48 days of withdrawal from cocaine, a time period in which high conductance GluA2-lacking AMPA receptors progressively emerge in the NAc. Overall, our results fail to support a role for hypocretins in acute modulation of glutamate receptor levels in the NAc or a role for altered Hcrtr-2 expression in withdrawal-dependent synaptic adaptations in the NAc following cocaine self-administration. PMID:24262606

  1. Effect of Er: YAG or Nd:YAG Laser Exposure on Fluorosed and Non-Fluorosed Root Surfaces: An In Vitro Study

    PubMed Central

    Ghosh, Saubhik; Dhingra, Kunaal; Patil, Roopa

    2015-01-01

    Background and aims: Fluorosis affects tooth mineralization. The therapeutic benefit provided by lasers on fluorosed and non fluorosed cementum requires studying and comparing. The aim of this study was to evaluate and compare the root surface changes following Er:YAG or Nd:YAG laser irradiation on periodontally healthy fluorosed versus non-fluorosed teeth by scanning electron microscopy (SEM). Materials and methods: A total of 76 periodontally healthy fluorosed (FH) and non-fluorosed (NFH) teeth specimens were included in this study. In one group, the experimental root specimens were irradiated using Er:YAG or with Nd:YAG laser in the other. A SEM evaluation was performed to assess the laser induced ultra structural changes in the root surface followed by statistical analysis using Fisher's exact test. Results: It was observed that both FH and NFH groups were similarly affected by Nd:YAG or Er:YAG laser. However, the former caused more surface changes than the latter on melting of surface (p=0.12 for FH and p=0.08 for NFH), and Er:YAG laser caused more smear layer formation (p=0.51 for FH and p=0.16 for NFH). Conclusion: Results suggest that undesirable morphological changes were observed almost similarly in FH and NFH groups using Er:YAG or Nd:YAG laser. Hence further in-vitro studies at lower energy settings followed by clinical trials are required in this aspect. PMID:26246689

  2. Identification of surface antigens of schistosomula of Schistosoma mansoni recognized by antibodies from mice immunized by chronic infection and by exposure to highly irradiated cercariae

    SciTech Connect

    Simpson, A.J.; James, S.L.; Sher, A.

    1983-08-01

    Surface components of mechanically transformed schistosomula of Schistosoma mansoni were labeled by lactoperoxidase-catalyzed iodination. After solubilization with Triton X-100, antigens were identified by immunoprecipitation. Serum from chronically infected Swiss mice reproducibly precipitated seven major polypeptides with approximate molecular weights (X 10/sup 3/) of 94, 68, 45, 40 to 32, 22, and 16. The antigens of molecular weights (X 10/sup 3/) of 94, 40 to 32, 22, and 16 were shown to be exposed on the parasite surface by interaction of the antibodies with intact labeled schistosomula. Sera from several strains of infected inbred mice precipitated the same polypeptides. The antibodies produced during chronic infection were found to be stimulated by adult worms since sera from 6-week-infected animals precipitated none of the surface antigens, and the pattern produced by precipitation with antibodies from a mouse infected with male worms only was indistinguishable from the pattern obtained with sera from mice with bisexual infections. Antibodies from mice immunized with highly irradiated cercariae reproducibly precipitated major polypeptides of approximately (X 10/sup 3/) 94, 68, 45, 32, 22, 19, and 15 daltons. The antigens of (X 10/sup 3/) 94, 43, 32, 22, and 15 daltons were shown to be exposed on the parasite surface by interaction of the antibodies with intact labeled schistosomula. The 15 X 10(3)-dalton surface protein was recognized by sera from vaccinated, but not chronically infected, mice, suggesting that it represents a stage-specific immunogen present on schistosomula but not on adult worms. Sera from two inbred strains of mice which develop different degrees of immunity recognized the same antigens.

  3. Criminal exposure.

    PubMed

    1999-08-01

    A 39-year-old man who had sex with a 16-year-old boy, was sentenced to five years in prison. The defendant pleaded guilty to statutory rape and criminal exposure to HIV. The boy discovered that the man was taking HIV medications, and the man subsequently disclosed his treatment after being arrested. PMID:11367003

  4. EXPOSURE ANALYSIS

    EPA Science Inventory

    This proceedings chapter will discuss the state-of-the-science regarding the evaluation of exposure as it relates to water quality criteria (WQC), sediment quality guidelines (SQG), and wildlife criteria (WC). Throughout this discussion, attempts are made to identify the methods ...

  5. Hypotonic exposures.

    PubMed

    Flynn, W J; Hill, R M

    1984-03-01

    Even without a contact lens, the cornea can suffer adverse physiological changes from hypotonic exposure, as well as the associated subjective phenomena (e.g., halo and rainbows). The contact lens adds a dimension to this problem that should be viewed against a background of normal (non-wearing) susceptibilities. PMID:6715776

  6. SOURCES AND PATHWAYS OF LEAD EXPOSURE

    EPA Science Inventory

    Exposure is defined here as the amount of a substance that comes into contact with an absorbing surface during a specified period of time. The normal units of exposure are expressed as micrograms per day. The two components of exposure are the concentration of the substance in ...

  7. Exposure chamber

    DOEpatents

    Moss, Owen R.; Briant, James K.

    1983-01-01

    An exposure chamber includes an imperforate casing having a fluid inlet at the top and an outlet at the bottom. A single vertical series of imperforate trays is provided. Each tray is spaced on all sides from the chamber walls. Baffles adjacent some of the trays restrict and direct the flow to give partial flow back and forth across the chambers and downward flow past the lowermost pan adjacent a central plane of the chamber.

  8. Cyclic diGMP Regulates Production of Sortase Substrates of Clostridium difficile and Their Surface Exposure through ZmpI Protease-mediated Cleavage*

    PubMed Central

    Peltier, Johann; Shaw, Helen A.; Couchman, Edward C.; Dawson, Lisa F.; Yu, Lu; Choudhary, Jyoti S.; Kaever, Volkhard; Wren, Brendan W.; Fairweather, Neil F.

    2015-01-01

    In Gram-positive pathogens, surface proteins may be covalently anchored to the bacterial peptidoglycan by sortase, a cysteine transpeptidase enzyme. In contrast to other Gram-positive bacteria, only one single sortase enzyme, SrtB, is conserved between strains of Clostridium difficile. Sortase-mediated peptidase activity has been reported in vitro, and seven potential substrates have been identified. Here, we demonstrate the functionality of sortase in C. difficile. We identify two sortase-anchored proteins, the putative adhesins CD2831 and CD3246, and determine the cell wall anchor structure of CD2831. The C-terminal PPKTG sorting motif of CD2831 is cleaved between the threonine and glycine residues, and the carboxyl group of threonine is amide-linked to the side chain amino group of diaminopimelic acid within the peptidoglycan peptide stem. We show that CD2831 protein levels are elevated in the presence of high intracellular cyclic diGMP (c-diGMP) concentrations, in agreement with the control of CD2831 expression by a c-diGMP-dependent type II riboswitch. Low c-diGMP levels induce the release of CD2831 and presumably CD3246 from the surface of cells. This regulation is mediated by proteolytic cleavage of CD2831 and CD3246 by the zinc metalloprotease ZmpI, whose expression is controlled by a type I c-diGMP riboswitch. These data reveal a novel regulatory mechanism for expression of two sortase substrates by the secondary messenger c-diGMP, on which surface anchoring is dependent. PMID:26283789

  9. Cytokine production by human epithelial and endothelial cells following exposure to oral viridans streptococci involves lectin interactions between bacteria and cell surface receptors.

    PubMed Central

    Vernier, A; Diab, M; Soell, M; Haan-Archipoff, G; Beretz, A; Wachsmann, D; Klein, J P

    1996-01-01

    In order to examine the possible implication of human epithelial and endothelial cells in the pathogenesis of various diseases associated with oral viridans streptococci, we tested the immunomodulatory effects of 11 representative strains of oral viridans streptococci on human epithelial KB cells and endothelial cells. We then examined the possible role of two major adhesins from oral viridans streptococci, protein I/II and rhamnose-glucose polymers (RGPs), in this process. In this study we demonstrate that oral viridans streptococci are potent stimulators of interleukin-8 (IL-8) production from KB cells and of IL-6 and IL-8 production from endothelial cells. The ability of protein I/II and RGPs to contribute to these effects was then examined. Using biotinylated protein I/IIf and RGPs from Streptococcus mutans OMZ 175, we showed that these adhesins bind to KB and endothelial cells through specific interactions and that the binding of these molecules initiates the release of IL-8 from KB cells and of IL-6 and IL-8 from endothelial cells. These results suggest that protein I/IIf and RGPs play an important role in the interactions between bacteria and KB and endothelial cells in that similar cytokine profiles are obtained when cells are stimulated with bacteria or surface components. We also provide evidence that protein I/IIf binds to and stimulates KB and endothelial cells through lectin interactions and that N-acetyl neuraminic acid (NANA) and fucose present on cell surface glycoproteins may form the recognition site since binding and cytokine release can be inhibited by dispase and periodate treatment of cells and by NANA and fucose. These results demonstrate that oral viridans streptococci, probably by engaging two cell surface adhesins, exert immunomodulatory effects on human KB and endothelial cells. PMID:8757828

  10. The in vitro reduction of sodium [36Cl]-chlorate in bovine ruminal fluid

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Sodium chlorate effectively reduces or eliminates the numbers of gram-negative pathogenic bacteria in the gastrointestinal tracts of live cattle. Limitations to the in vivo efficacy of chlorate are its rapid absorption from the gastrointestinal tract and its presumed reduction to chloride within the...

  11. Total radioactive residues and residues of [36Cl]chlorate in market size broilers.

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The oral administration of chlorate salts reduces the numbers of Gram-negative pathogens in gastrointestinal tracts of live food animals. Although the efficacy of chlorate salts has been demonstrated repeatedly, the technology cannot be introduced into commercial settings without first demonstrating...

  12. Neutron capture production rates of cosmogenic 60Co, 59Ni and 36Cl in stony meteorites

    NASA Technical Reports Server (NTRS)

    Spergel, M. S.; Reedy, R. C.; Lazareth, O. W.; Levy, P. W.

    1986-01-01

    Results for neutron flux calculations in stony meteoroids (of various radii and compositions) and production rates for Cl-36, Ni-59, and Co-60 are reported. The Ni-59/Co-60 ratio is nearly constant with depth in most meteorites: this effect is consistent with the neutron flux and capture cross section properties. The shape of the neutron flux energy spectrum, varies little with depth in a meteorite. The size of the parent meteorite can be determined from one of its fragments, using the Ni-59/Co-60 ratios, if the parent meteorite was less than 75 g/cm(2) in radius. If the parent meteorite was larger, a lower limit on the size of the parent meteorite can be determined from a fragment. In C3 chondrites this is not possible. In stony meteorites with R less than 50 g/cm(2) the calculated Co-60 production rates (mass less than 4 kg), are below 1 atom/min g-Co. The highest Co-60 production rates occur in stony meteorites with radius about 250 g/cm(2) (1.4 m across). In meteorites with radii greater than 400 g/cm(2), the maximum Co-60 production rate occurs at a depth of about 175 g/cm(2) in L-chondrite, 125 g/cm(2) in C3 chrondrite, and 190 g/cm(2) in aubrites.

  13. TISSUE RESIDUES, METABOLISM, AND EXCRETION OF NA[36CL]O3 IN RATS

    Technology Transfer Automated Retrieval System (TEKTRAN)

    A novel pre-harvest technology that reduces certain pathogenic bacteria in the gastrointestinal tracts of food animals involves feeding an experimental sodium chlorate-containing product (ECP) to animals 24-72 h prior to slaughter. In order to determine the metabolism and disposition of the active ...

  14. Interlaboratory study of the ion source memory effect in 36Cl accelerator mass spectrometry

    NASA Astrophysics Data System (ADS)

    Pavetich, Stefan; Akhmadaliev, Shavkat; Arnold, Maurice; Aumaître, Georges; Bourlès, Didier; Buchriegler, Josef; Golser, Robin; Keddadouche, Karim; Martschini, Martin; Merchel, Silke; Rugel, Georg; Steier, Peter

    2014-06-01

    Understanding and minimization of contaminations in the ion source due to cross-contamination and long-term memory effect is one of the key issues for accurate accelerator mass spectrometry (AMS) measurements of volatile elements. The focus of this work is on the investigation of the long-term memory effect for the volatile element chlorine, and the minimization of this effect in the ion source of the Dresden accelerator mass spectrometry facility (DREAMS). For this purpose, one of the two original HVE ion sources at the DREAMS facility was modified, allowing the use of larger sample holders having individual target apertures. Additionally, a more open geometry was used to improve the vacuum level. To evaluate this improvement in comparison to other up-to-date ion sources, an interlaboratory comparison had been initiated. The long-term memory effect of the four Cs sputter ion sources at DREAMS (two sources: original and modified), ASTER (Accélérateur pour les Sciences de la Terre, Environnement, Risques) and VERA (Vienna Environmental Research Accelerator) had been investigated by measuring samples of natural 35Cl/37Cl-ratio and samples highly-enriched in 35Cl (35Cl/37Cl ∼ 999). Besides investigating and comparing the individual levels of long-term memory, recovery time constants could be calculated. The tests show that all four sources suffer from long-term memory, but the modified DREAMS ion source showed the lowest level of contamination. The recovery times of the four ion sources were widely spread between 61 and 1390 s, where the modified DREAMS ion source with values between 156 and 262 s showed the fastest recovery in 80% of the measurements.

  15. TISSUE DISTRIBUTION, ELIMINATION, AND METABOLISM OF SODIUM [36CL]PERCHLORATE IN LACTATING GOATS

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Perchlorate has contaminated water sources throughout the US, but particularly in the arid Southwest, an area containing large numbers of people and few water sources. Recent studies have demonstrated that perchlorate is present in alfalfa and that perchlorate is secreted into the milk of cows. Stud...

  16. The in vitro reduction of sodium [36Cl]-chlorate in bovine ruminal fluid.

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Sodium chlorate effectively reduces or eliminates the numbers of gram-negative pathogenic bacteria in the gastrointestinal tracts of live cattle. Limitations to the in vivo efficacy of chlorate are its rapid absorption from the gastrointestinal tract and its presumed reduction to chloride within the...

  17. TISSUE DISTRIBUTION, ELIMINATION, AND METABOLISM OF SODIUM 36CL-PERCHLORATE IN LACTATING GOATS.

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Perchlorate has contaminated water sources throughout the US, but particularly in the arid Southwest, an area containing large numbers of people and few water sources. Recent studies have demonstrated that perchlorate is present in alfalfa and that perchlorate is secreted into the milk of cows. Only...

  18. Authors's reply to `Generation of surface degraded layer on austenitic stainless steel piping exposed to flowing sodium in a loop: inter comparison of long term exposure data', by S. Rajendran Pillai

    NASA Astrophysics Data System (ADS)

    Ganesan, Vaidehi; Ganesan, V.; Borgstedt, H. U.

    2004-09-01

    This is an elaborate author's reply to a comment `Generation of surface degraded layer on austenitic steel piping exposed to flowing sodium in a loop: inter comparison of long term exposure data' by S. Rajendran Pillai appearing in this proceedings. The basic misunderstanding as seen in the above comment about the mass loss due to sodium exposure, which is reflected throughout the above comment, has been explained in detail in this reply for better understanding of the phenomenon. It is precisely mentioned and understood that Thorley and Tyzack model deals with complete mass loss and not mere degradation. The total mass loss corresponds to mass loss due to wall thinning and that due to degraded layer formation. Though Thorley and Tyzack model is the most pioneering model in the field of sodium corrosion, the inadequacies of this model for materials without molybdenum such as SS 304 with very long exposure in sodium is clearly brought out in this paper. This model has been successfully applied to calculate life of clad tubes, which have relatively short stay in reactor core. Yoshida models are highlighted and compared with our experimental results. Yoshida models are not valid below certain durations owing to the empirical nature of such expressions. Thorley and Tyzack model can be used for SS 316 LN as this alloy contains molybdenum and nitrogen both of which imparts corrosion resistance in sodium. What is required is that one needs to establish the extent to which this model can be applied for materials exposed to high temperatures and very long durations. The details are discussed in this reply.

  19. Evaluating the reliability of Late Quaternary landform ages: Integrating 10Be cosmogenic surface exposure dating with U-series dating of pedogenic carbonate on alluvial and fluvial deposits, Sonoran desert, California

    NASA Astrophysics Data System (ADS)

    Blisniuk, K.; Sharp, W. D.

    2015-12-01

    To assess the reliability of Quaternary age determinations of alluvial and fluvial deposits across the Sonoran Desert (Coachella Valley and Anza Borrego) in southern California, we applied both 10Be exposure age dating of surface clasts and U-series dating of pedogenic carbonate from subsurface clast-coatings to the same deposits. We consider agreement between dates from the two techniques to indicate reliable age estimates because each technique is subject to distinct assumptions and therefore their systematic uncertainties are largely independent. 10Be exposure dates should yield maximum ages when no correction is made for inheritance and post-depositional erosion is negligible. U-series dating, in contrast, provides minimum dates because pedogenic carbonate forms after deposition. Our results show that: (1) For deposits ca. 70 ka or younger, 10Be and U-series dates were generally concordant. We note, however, that in most cases U-series soil dates exceed 10Be exposure dates that are corrected for inheritance when using 10Be in modern alluvium. This suggests that 10Be concentrations of modern alluvium may exceed the 10Be acquired by late Pleistocene deposits during fluvial transport and hillslope residence (i.e., Pleistocene inherited 10Be). (2) For deposits older than ~70 ka, U-series dates are significantly younger than the 10Be dates. This implies that U-series dates in this region may significantly underestimate the depositional age of older alluvium, probably because of delayed onset of deposition, slow accumulation, or poor preservation of secondary carbonate in response to climatic controls. Thus, whenever possible, multiple dating methods should be applied to obtain reliable ages for late Quaternary deposits.

  20. Deuterium absorption from the D{sub 2}O exposure of oxidized 4H-SiC (0001), (0001{sup ¯}), and (112{sup ¯}0) surfaces

    SciTech Connect

    Liu, Gang; Xu, Can; Feldman, Leonard C.; Yakshinskiy, Boris; Wielunski, Leszek; Gustafsson, Torgny; Bloch, Joseph; Dhar, Sarit

    2015-03-23

    We report results on deuterium absorption on several oxidized 4H-SiC surfaces following D{sub 2}O vapor absorption. Absorption at the oxide/semiconductor interface is strongly face dependent with an order of magnitude more deuterium on the C-face and a-face than on the Si-face, in contrast to the bulk of the oxides which show essentially no face dependence. Annealing in NO gas produces a large reduction in interfacial deuterium absorption in all cases. The reduction of the positive charge at the interface scales linearly with the interface D content. These results also scale with the variation in interface trap density (D{sub it}) and mobility on the three faces after wet oxidation annealing.

  1. Utilizing TEMPO surface estimates to determine changes in emissions, community exposure and environmental impacts from cement kilns across North America using alternative fuels

    NASA Astrophysics Data System (ADS)

    Pegg, M. J.; Gibson, M. D.; Asamany, E.

    2015-12-01

    community exposure research in NA. The application of the new NASA TEMPO satellite to track the dispersion of SO2, PM2.5 and NO2 in plumes and secondary O3 and aerosol formation downwind of cement kilns opens up an exciting new avenue of air pollution research in NA.

  2. Liquid sulfur mustard exposure.

    PubMed

    Newmark, Jonathan; Langer, Janice M; Capacio, Benedict; Barr, John; McIntosh, Roger G

    2007-02-01

    A 35-year-old active duty service member sustained a 6.5% body surface area burn as a result of exposure to the chemical warfare agent sulfur mustard, which is the most severe mustard exposure of a U.S. military member since World War II that is known to us. New techniques were used to demonstrate the detectable persistence of mustard metabolites in the patient's blood for at least 41 days after exposure, validating these techniques for the first time for a human mustard patient; they were also used for the first time with human mustard blister fluid. The techniques extend eightfold the period of time that mustard exposure can be definitively diagnosed, compared with previous techniques. Although this patient's lesions were never life-threatening, he required 2 weeks of intensive burn care. He has been left with ongoing posttraumatic stress disorder and has had an incomplete dermatological recovery. In a major terrorist attack involving many patients exposed to sulfur mustard, care resources would be depleted quickly. PMID:17357776

  3. Conformational changes in Sindbis virions resulting from exposure to low pH and interactions with cells suggest that cell penetration may occur at the cell surface in the absence of membrane fusion.

    PubMed

    Paredes, Angel M; Ferreira, Davis; Horton, Michelle; Saad, Ali; Tsuruta, Hiro; Johnston, Robert; Klimstra, William; Ryman, Kate; Hernandez, Raquel; Chiu, Wah; Brown, Dennis T

    2004-07-01

    Alphaviruses have the ability to induce cell-cell fusion after exposure to acid pH. This observation has served as an article of proof that these membrane-containing viruses infect cells by fusion of the virus membrane with a host cell membrane upon exposure to acid pH after incorporation into a cell endosome. We have investigated the requirements for the induction of virus-mediated, low pH-induced cell-cell fusion and cell-virus fusion. We have correlated the pH requirements for this process to structural changes they produce in the virus by electron cryo-microscopy. We found that exposure to acid pH was required to establish conditions for membrane fusion but that membrane fusion did not occur until return to neutral pH. Electron cryo-microscopy revealed dramatic changes in the structure of the virion as it was moved to acid pH and then returned to neutral pH. None of these treatments resulted in the disassembly of the virus protein icosahedral shell that is a requisite for the process of virus membrane-cell membrane fusion. The appearance of a prominent protruding structure upon exposure to acid pH and its disappearance upon return to neutral pH suggested that the production of a "pore"-like structure at the fivefold axis may facilitate cell penetration as has been proposed for polio (J. Virol. 74 (2000) 1342) and human rhino virus (Mol. Cell 10 (2002) 317). This transient structural change also provided an explanation for how membrane fusion occurs after return to neutral pH. Examination of virus-cell complexes at neutral pH supported the contention that infection occurs at the cell surface at neutral pH by the production of a virus structure that breaches the plasma membrane bilayer. These data suggest an alternative route of infection for Sindbis virus that occurs by a process that does not involve membrane fusion and does not require disassembly of the virus protein shell. PMID:15207623

  4. Criminal exposure.

    PubMed

    1999-09-01

    In August, an HIV-positive man plead guilty to sexually assaulting a 14-year-old boy. The sleeping boy awoke to find [name removed] sexually assaulting him, while watching a pornographic video. [Name removed] plead guilty to the assault with intent to rape a child. In addition, [name removed] received three counts of indecent assault and battery on a child, and exposure of pornographic material to a minor. [Name removed] will remain on probation for five years, although the prosecution had recommended sentencing [name removed] to four or five years in prison. The boy continues to be tested for HIV. PMID:11366904

  5. Seasonal exposures to triazine and other pesticides in surface waters in the western Highveld corn-production region in South Africa

    USGS Publications Warehouse

    Du Preez, L.H.; Jansen Van Rensburg, P.J.; Jooste, A.M.; Carr, J.A.; Giesy, J.P.; Gross, T.S.; Kendall, R.J.; Smith, E.E.; Van Der Kraak, G.; Solomon, K.R.

    2005-01-01

    The objective of this study was to characterize concentrations of atrazine, terbuthylazine, and other pesticides in amphibian habitats in surface waters of a corn-production area of the western Highveld region (North-West Province) of South Africa. The study was conducted from November 2001 to June 2002, coinciding with the corn-production season. Pesticide residues were measured at regular intervals in surface water from eight ponds, three in a non-corn-growing area (NCGA) and five within the corn-growing area (CGA). Measured atrazine concentrations differed significantly among sites and between samples. In the five CGA sites, the maximum atrazine concentrations measured during the study ranged from 1.2 to 9.3 ??g/L. Although no atrazine was recorded as being applied in the catchment of the three NCGA sites, maximum concentrations from 0.39 to 0.84 ??g/L were measured during the study, possibly as a result of atmospheric transport. Maximum measured concentrations of terbuthylazine ranged from 1.22 to 2.1 ??g/L in the NCGA sites and from 1.04 to 4.1 ??g/L in the CGA sites. The source of terbuthylazine in the NCGA sites may have been in use other than in corn. The triazine degradation products, deisopropylatrazine (DIA) and deethylatrazine (DEA) and diaminochlorotriazine (DACT) were also found in water from both the CGA and NCGA sites. Concentrations of DIA were ??? 1 ??g/L throughout the season, while DEA concentrations were mostly 2 ??g/L in some locations. Concentrations of DACT were highly variable (LOD to 8 ??g/L) both before and after planting and application, suggesting that they resulted from historical use of triazines in the area. Other herbicides such as simazine and acetochlor were only detected infrequently and pesticides such as S-metolachlor, cypermethrin, monocrotophos, and terbuphos, known to be used in the CGA, were not detected in any of the samples. Because of dilution by higher than normal rainfall in the study period, these concentrations may

  6. Examples of sackungen in the French Western Alps and their geochronology based on the 10Be cosmic ray exposure dating method (Invited)

    NASA Astrophysics Data System (ADS)

    Hippolyte, J.; Bourles, D. L.; Braucher, R.; Léanni, L.; Chauvet, F.; Lebatard, A.; Arnold, M.; Aumaître, G.; Keddadouche, K.

    2013-12-01

    In the French Alps, sackung scarps were often interpreted as surface traces of active faults. A detailed mapping of the Arc and Rognier mountains shows that these scarps result from deep-seated gravitational slope deformation (DSGSD). They are short (less than 2.1 km long), numerous and organized in swarms (5.3 km long at the Arc; 9 km long at Rognier). There are mainly uphill facing scarps developed on steep slopes. Open tension cracks are present at ridge tops. These sackung fractures created ridge-top troughs, closed depressions and multiple-crests landforms. That the sackung scarps are parallel to the contour lines, and that they result from opening of fractures or from normal slips, indicates that they are controlled by topography and gravity. In the Western Alps, glacial erosion and subsequent debuttressing of oversteepened slopes seem to be the main factors for the occurrence of sackungen. However, gradual loss of rock strength, groundwater fluctuations, subsidence due to evaporite dissolution and earthquake shaking, may contribute to their formation. For a better understanding of the origin of sackungen, chronological data are crucial. We used the cosmic ray exposure (CRE) dating method for deciphering the activity of the Arc and Rognier sackungen. This method allows quantification of the exposure duration of a surface to cosmic rays, by measuring the amount of accumulated cosmogenic nuclides in surficial rocks. Because sackung scarps usually form in hard rocks containing quartz, we used the 10Be cosmogenic nuclide which is produced in situ by spallation reactions on Si and O (36Cl can be used for limestone). The measurements were performed at ASTER, the French accelerator mass spectrometry facility located at the CEREGE laboratory in Aix-en-Provence. The CRE dating method allows direct dating of most of the geomorphologic structures involved in sackungen: sackung fault scarps, rock slopes, debris slopes, screes, rock glaciers, glacier-polished rock surface

  7. Nano silver and nano zinc-oxide in surface waters – Exposure estimation for Europe at high spatial and temporal resolution

    PubMed Central

    Dumont, Egon; Johnson, Andrew C.; Keller, Virginie D.J.; Williams, Richard J.

    2015-01-01

    Nano silver and nano zinc-oxide monthly concentrations in surface waters across Europe were modeled at ∼6 × 9 km spatial resolution. Nano-particle loadings from households to rivers were simulated considering household connectivity to sewerage, sewage treatment efficiency, the spatial distribution of sewage treatment plants, and their associated populations. These loadings were used to model temporally varying nano-particle concentrations in rivers, lakes and wetlands by considering dilution, downstream transport, water evaporation, water abstraction, and nano-particle sedimentation. Temporal variability in concentrations caused by weather variation was simulated using monthly weather data for a representative 31-year period. Modeled concentrations represent current levels of nano-particle production. Two scenarios were modeled. In the most likely scenario, half the river stretches had long-term average concentrations exceeding 0.002 ng L−1 nano silver and 1.5 ng L−1 nano zinc oxide. In 10% of the river stretches, these concentrations exceeded 0.18 ng L−1 and 150 ng L−1, respectively. Predicted concentrations were usually highest in July. PMID:25463731

  8. Polybrominated diphenyl ether (PBDE) concentrations and resulting exposure in homes in California: relationships among passive air, surface wipe and dust concentrations, and temporal variability.

    PubMed

    Bennett, D H; Moran, R E; Wu, X May; Tulve, N S; Clifton, M S; Colón, M; Weathers, W; Sjödin, A; Jones, R; Hertz-Picciotto, I

    2015-04-01

    Polybrominated diphenyl ethers (PBDEs) are used as flame retardants in furniture foam, electronics, and other home furnishings. A field study was conducted that enrolled 139 households from California, which has had more stringent flame retardant requirements than other countries and areas. The study collected passive air, floor and indoor window surface wipes, and dust samples (investigator collected using an HVS3 and vacuum cleaner) in each home. PentaBDE and BDE209 were detected in the majority of the dust samples and many floor wipe samples, but the detection in air and window wipe samples was relatively low. Concentrations of each PBDE congener in different indoor environmental media were moderately correlated, with correlation coefficients ranging between 0.42 and 0.68. Correlation coefficients with blood levels were up to 0.65 and varied between environmental media and age group. Both investigator-collected dust and floor wipes were correlated with serum levels for a wide range of congeners. These two sample types also had a relatively high fraction of samples with adequate mass for reliable quantification. In 42 homes, PBDE levels measured in the same environmental media in the same home 1 year apart were statistically correlated (correlation coefficients: 0.57-0.90), with the exception of BDE209 which was not well correlated longitudinally. PMID:24832910

  9. Survival of enveloped and non-enveloped viruses on surfaces compared with other micro-organisms and impact of suboptimal disinfectant exposure.

    PubMed

    Howie, R; Alfa, M J; Coombs, K

    2008-08-01

    Survival of enveloped and non-enveloped viruses was compared with that of bacteria, yeasts and mycobacteria when dried on the surface of polyvinyl chloride test carriers in the presence or absence of an organic matrix. The efficacy of glutaraldehyde and accelerated hydrogen peroxide (AHP) disinfectants was evaluated. Reovirus, a non-enveloped virus, persisted and had a RF of 2 after 30 days whereas Enterococcus faecalis had an RF of 4 over the same time period. The other test organisms (Sindbis virus, Pseudomonas aeruginosa, Mycobacterium chelonae and Candida albicans) had variable survivals but none survived as long as 30 days. Both glutaraldehyde and AHP were effective at manufactures' recommended dilutions for high-level disinfection. However, only 7% AHP eliminated a glutaraldehyde-resistant strain of M. chelonae. Breakthrough survival was detected at 0.1% glutaraldehyde and 0.05% AHP for all organisms tested. Our data emphasise the need for effective cleaning and disinfection in nosocomial settings to prevent pathogen transmission. PMID:18602193

  10. Terrestrial cosmogenic surface exposure dating of glacial and associated landforms in the Ruby Mountains-East Humboldt Range of central Nevada and along the northeastern flank of the Sierra Nevada

    NASA Astrophysics Data System (ADS)

    Wesnousky, Steven G.; Briggs, Richard W.; Caffee, Marc W.; Ryerson, F. J.; Finkel, Robert C.; Owen, Lewis A.

    2016-09-01

    Deposits near Lamoille in the Ruby Mountains-East Humboldt Range of central Nevada and at Woodfords on the eastern edge of the Sierra Nevada each record two distinct glacial advances. We compare independent assessments of terrestrial cosmogenic nuclide (TCN) surface exposure ages for glacial deposits that we have determined to those obtained by others at the two sites. At each site, TCN ages of boulders on moraines of the younger advance are between 15 and 30 ka and may be associated with marine oxygen isotope stage (MIS) 2. At Woodfords, TCN ages of boulders on the moraine of the older advance are younger than ~ 60 ka and possibly formed during MIS 4, whereas boulders on the correlative outwash surface show ages approaching 140 ka (~ MIS 6). The TCN ages of boulders on older glacial moraine at Woodfords thus appear to severely underestimate the true age of the glacial advance responsible for the deposit. The same is possibly true at Lamoille where clasts sampled from the moraine of the oldest advance have ages ranging between 20 and 40 ka with a single outlier age of ~ 80 ka. The underestimations are attributed to the degradation and denudation of older moraine crests. Noting that boulder ages on the older advances at each site overlap significantly with MIS 2. We speculate that erosion of the older moraines has been episodic, with a pulse of denudation accompanying the inception of MIS 2 glaciation.

  11. A new paleoseismological investigation across the Paleochori-Sarakina Fault, Northern Greece: Trenching exposures of the surface rupture of 1995 Ms 6.6 Kozani-Grevena earthquake

    NASA Astrophysics Data System (ADS)

    Tsodoulos, Ioannis; Gallousi, Christina; Chatzipetros, Alexandros; Stamoulis, Konstantinos; Ioannides, Konstantinos; Pavlides, Spyros

    2015-04-01

    The preliminary results from a new paleoseismological investigation carried out along the Paleochori-Sarakina fault segment, West Macedonia, Northern Greece, are presented. The Paleochori-Sarakina fault is a SW-NE trending north-dipping normal fault, which was ruptured during the 13th May 1995 devastating earthquake (Ms = 6.6) that affected the Kozani-Grevena area. The 10-km-long Paleochori-Sarakina fault is expressed as a complex, 15- to 50-m-high escarpment on early-middle Miocene molassic sediments of the Meso-Hellenic trench and it forms the southeast segment of the Aliakmon river Fault system. A series of surface ruptures, with a maximum displacement of ~10 cm, were created during the 1995 earthquake in the area between Paleohori and Sarakina villages. Several trenches were excavated along the Paleohori-Sarakina fault right after the 1995 earthquake and three previous faulting events were identified. Thermoluminescence (TL) dating has been used to date the recognized paleoearthquakes. Recurrence interval based on these TL ages was 30 ka which was extremely high and the estimated slip-rate extremely low (0.01-0.03 mm/a). We excavated two new paleoseismological trenches near the Paleochori village in order to improve our knowledge on the Holocene tectono-stratigraphy of this structure and to obtain new samples for dating using an improved dating technique. The first trench was located 500 m southeast from the Paleochori village and was excavated across a 1.5-m-high north-facing fault scarp. The trench was 30 m long and up to 4 m deep. The second trench was located at the base of a 5-m-high scarp at the northeastern end of the Paleochori-Sarakina fault segment, south of the Paleochori village. The trench was 17 m long and up to 3 m deep. Both trenches intersect the fault zone which separates mollasic sediments exposed on the upthrown block from colluvial deposits of the downthrown block. The initial preliminary interpretation of the trench wall structure provided

  12. Rapid degradation of the complex organic molecules in Martian surface rocks due to exposure to cosmic rays. Implications to the search of 'extinct' life on Mars by MSL and ExoMars

    NASA Astrophysics Data System (ADS)

    Pavlov, A.; Eigenbrode, J. L.; Glavin, D. P.; Floyd, M.; Mahaffy, P. R.

    2013-12-01

    Until recently, long-term exposure to cosmic rays has not been recognized as a major environmental factor, which can alter and destroy organic molecules in the Martian surface rocks. Recent modeling studies (e.g. Pavlov et al., 2012) suggested that organic molecules with masses >100 amu would be degraded in less than 1 billion years in the top 5 cm of the Martian rocks. That poses a serious challenge to the search of ancient molecules in the shallow subsurface of Mars. However, Pavlov et al. calculated the fraction of the survived organic molecules using conservative radiolysis constants derived from the gamma irradiation experiments on pure dry amino acid mixtures (Kminek and Bada, 2006). In this study we conducted a series of gamma irradiations of amino acids and carboxylic acids mixed with silica powder. We report that the addition of silicates dramatically increased the rate of organic degradation under gamma radiation. Using the newly derived radiolysis constants for amino acids and carboxylic acids in mineral mixtures, we recalculated the rate of organic degradation in the Martian rocks as a function of rocks' depth, chemical composition and weathering rates. Our results suggest that isolated organic molecules (acids) are likely to be altered or fully degraded in the surface rocks on Mars by cosmic rays in less than 10 million years unless some additional protective mechanisms are in place. We will discuss possible strategies for the MSL's search of the elusive ancient organic molecules to overcome the adverse effects of cosmic rays in the surface Martian rocks. References. Pavlov et al., 2012 GEOPHYSICAL RESEARCH LETTERS, doi:10.1029/2012GL052166 Kminek, G., and J. Bada (2006), Earth Planet. Sci. Lett., 245, 1-5, doi:10.1016/j.epsl.2006.03.008.

  13. PESTICIDE RESIDUE RECOVERIES FROM SURFACE WIPES

    EPA Science Inventory

    Human exposure is a consequence of pesticide use indoors with a primary source resulting from residue deposition on household surfaces. Accurate measurements of surface residues is essential for estimating exposure from different routes. Various procedures have been developed ...

  14. Exposure chamber

    DOEpatents

    Moss, Owen R.

    1980-01-01

    A chamber for exposing animals, plants, or materials to air containing gases or aerosols is so constructed that catch pans for animal excrement, for example, serve to aid the uniform distribution of air throughout the chamber instead of constituting obstacles as has been the case in prior animal exposure chambers. The chamber comprises the usual imperforate top, bottom and side walls. Within the chamber, cages and their associated pans are arranged in two columns. The pans are spaced horizontally from the walls of the chamber in all directions. Corresponding pans of the two columns are also spaced horizontally from each other. Preferably the pans of one column are also spaced vertically from corresponding pans of the other column. Air is introduced into the top of the chamber and withdrawn from the bottom. The general flow of air is therefore vertical. The effect of the horizontal pans is based on the fact that a gas flowing past the edge of a flat plate that is perpendicular to the flow forms a wave on the upstream side of the plate. Air flows downwardly between the chamber walls and the outer edges of the pan. It also flows downwardly between the inner edges of the pans of the two columns. It has been found that when the air carries aerosol particles, these particles are substantially uniformly distributed throughout the chamber.

  15. DIETARY EXPOSURES OF YOUNG CHILDREN, PART 3: MODELLING

    EPA Science Inventory

    A deterministic model was used to model dietary exposure of young children. Parameters included pesticide residue on food before handling, surface pesticide loading, transfer efficiencies and children's activity patterns. Three components of dietary pesticide exposure were includ...

  16. Calcium and initial surface binding phase of pinocytosis in Amoeba proteus

    SciTech Connect

    Prusch, R.D.

    1986-08-01

    The uptake of membrane-bound solute and external medium by bulk-phase pinocytosis in Amoeba proteus is influenced by the level of Ca/sup 2 +/ in the external medium. Increasing external Ca/sup 2 +/ to approx.10/sup -4/ M increases pinocytotic intensity, while increases in Ca/sup 2 +/ above this level decrease the intensity of pinocytosis. The initial interaction of pinocytotic inducers and Ca/sup +2/ at the surface of A moeba proteus was therefore examined. Alcain blue and Na/sup +/, both inducers of pinocytosis, differ in the manner with which they associate with the amoeba surface, suggesting the possibility of different pinocytosis-inducing sites on the amoeba surface. Low levels of external Ca/sup 2 +/ in the range of 3 x 10/sup -5/ to 4.5 x 10/sup -4/ M increase the amount of cationic inducer associated with the cell surface while, at the same time, decreasing anion association with the cell surface. It is suggested that Ca/sup 2 +/ influences ion association with the cell surface by controlling the availability of negative surface sites, which in turn influences pinocytotic intensity. Surface binding of Na/sup +/, Ca/sup 2 +/ and Cl/sup -/ was determined by adding /sup 22/Na, /sup 45/Ca or /sup 36/Cl.

  17. Fibroblast behavior after titanium surfaces exposure

    PubMed Central

    Danza, Matteo; Zollino, Ilaria; Candotto, Valentina; Cura, Francesca; Carinci, Francesco

    2012-01-01

    Background: The main requirements for a good material are its ability to promote attraction and adhesion of bone precursor cells and their proliferation and differentiation. Different biocompatible materials are currently employed as scaffold. Among these, titanium is considered a gold standard because of its biocompatibility and good corrosion resistance. Materials and Methods: The aim of this work was to compare two different AoN titanium layers (GR4 and GR5) to investigate which one had a greater osteoconductive power using human fibroblasts (HFb) culture at two different time-points. The expression levels of some adhesion and traction-resistance related genes (COL11A1, COL2A1, COL9A1, DSP, ELN, HAS1, and TFRC) were analyzed using real time reverse transcription-polymerase chain reaction. Results: After 7 days of treatment with TiA 4GR, the only two up-regulated genes were COL2A1 and DSP. After 15 days of treatment, none of genes over expressed. Conclusion: Our preliminary results suggest that neither AoN 4GR nor AoN 5GR are able to promote the production of protein involved in cell–cell and cell–matrix adhesion and in stress-resistance, required for a good outcome in dental implantology. PMID:23814586

  18. 30 CFR 57.5002 - Exposure monitoring.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Exposure monitoring. 57.5002 Section 57.5002..., Physical Agents, and Diesel Particulate Matter Air Quality-Surface and Underground § 57.5002 Exposure monitoring. Dust, gas, mist, and fume surveys shall be conducted as frequently as necessary to determine...

  19. Exposure History of Lunar Meteorites Queen Alexandra Range 93069 and 94269

    NASA Technical Reports Server (NTRS)

    Nishiizumi, K.; Caffee, M. W.; Jull, A. J. T.; Reedy, R. C.

    1996-01-01

    Cosmic-ray produced C-14 (t(sub 1/2) = 5730 years), 36Cl (3.01 x 10(exp 5 years), Al-26 (7.05 x 10(exp 5 years), and Be-10 (1.5 x 10(exp 6 years) in the recently discovered lunar meteorites Queen Alexandra Range 93069 (QUE 93069) and 94269 (QUE 94269) were measured by accelerator mass spectrometry. The abundance pattern of these four cosmogenic radionuclides and of noble gases indicates QUE 93069 and QUE 94269 were a paired fall and were exposed to cosmic rays near the surface of the Moon for at least several hundred million years before ejection. After the meteorite was launched from the Moon, where it had resided at a depth of 65-80 g/cm square, it experienced a short transition time, approximately 20-50 ka, before colliding with the Earth. The terrestrial age of the meteorite is 5-10 ka. Comparison ofthe cosmogenic nuclide concentrations in QUE 93069/94269 and MAC 88104/88105 clearly shows that these meteorites were not ejected by a common event from the Moon.

  20. Random rough surface photofabrication

    NASA Astrophysics Data System (ADS)

    Brissonneau, Vincent; Escoubas, Ludovic; Flory, François; Berginc, Gérard

    2011-10-01

    Random rough surfaces are of primary interest for their optical properties: reducing reflection at the interface or obtaining specific scattering diagram for example. Thus controlling surface statistics during the fabrication process paves the way to original and specific behaviors of reflected optical waves. We detail an experimental method allowing the fabrication of random rough surfaces showing tuned statistical properties. A two-step photoresist exposure process was developed. In order to initiate photoresist polymerization, an energy threshold needs to be reached by light exposure. This energy is brought by a uniform exposure equipment comprising UV-LEDs. This pre-exposure is studied by varying parameters such as optical power and exposure time. The second step consists in an exposure based on the Gray method.1 The speckle pattern of an enlarged scattered laser beam is used to insolate the photoresist. A specific photofabrication bench using an argon ion laser was implemented. Parameters such as exposure time and distances between optical components are discussed. Then, we describe how we modify the speckle-based exposure bench to include a spatial light modulator (SLM). The SLM used is a micromirror matrix known as Digital Micromirror Device (DMD) which allows spatial modulation by displaying binary images. Thus, the spatial beam shape can be tuned and so the speckle pattern on the photoresist is modified. As the photoresist photofabricated surface is correlated to the speckle pattern used to insolate, the roughness parameters can be adjusted.

  1. Cross-classified occupational exposure data.

    PubMed

    Jones, Rachael M; Burstyn, Igor

    2016-09-01

    We demonstrate the regression analysis of exposure determinants using cross-classified random effects in the context of lead exposures resulting from blasting surfaces in advance of painting. We had three specific objectives for analysis of the lead data, and observed: (1) high within-worker variability in personal lead exposures, explaining 79% of variability; (2) that the lead concentration outside of half-mask respirators was 2.4-fold higher than inside supplied-air blasting helmets, suggesting that the exposure reduction by blasting helmets may be lower than expected by the Assigned Protection Factor; and (3) that lead concentrations at fixed area locations in containment were not associated with personal lead exposures. In addition, we found that, on average, lead exposures among workers performing blasting and other activities was 40% lower than among workers performing only blasting. In the process of obtaining these analyses objectives, we determined that the data were non-hierarchical: repeated exposure measurements were collected for a worker while the worker was a member of several groups, or cross-classified among groups. Since the worker is a member of multiple groups, the exposure data do not adhere to the traditionally assumed hierarchical structure. Forcing a hierarchical structure on these data led to similar within-group and between-group variability, but decreased precision in the estimate of effect of work activity on lead exposure. We hope hygienists and exposure assessors will consider non-hierarchical models in the design and analysis of exposure assessments. PMID:27029937

  2. Tritium monitoring of groundwater and surfaces

    SciTech Connect

    MacArthur, D.; Aamodt, P.; Bounds, J.; Koster, J.

    1999-03-01

    There are numerous facilities, both within the US and in the rest of the world, within the complex of radiation laboratories and production plants where tritium has been released into the environment because of historic or ongoing mission-related operations. Many of environmental restoration projects have detected low levels of tritium contamination in local streams, ponds, and/or ground water. Typically these waters are moving or have the potential to move offsite and are viewed as a potential risk to the public and environment. Los Alamos National Laboratory will modify the well-proven long-range alpha detection (LRAD) technique for detection of ionizing radiation to optimize a system for detecting tritium in groundwater and other surfaces. The LRAD technique relies on detection of ionized air molecules rather than direct detection of ionizing radiation. The detected electrical current is proportional to the number of ionized air molecules present, which is in turn a measure of the amount of contamination present. Although this technique has been used commercially to measure alpha contamination on objects and surfaces, the technique is also ideal for monitoring low-energy beta particles. The authors have demonstrated beta detection using {sup 54}Mn, {sup 14}C, {sup 147}Pm, {sup 99}Tc, {sup 90}Sr, and {sup 36}Cl sources. Thus, the detector technology and detection of beta particles using this technology have both been demonstrated. The extreme short range of tritium beta particles necessitates an optimization of the detector system. In this paper, the authors will discuss these new designs.

  3. Medium wave exposure characterisation using exposure quotients.

    PubMed

    Paniagua, Jesús M; Rufo, Montaña; Jiménez, Antonio; Antolín, Alicia; Pinar, Iván

    2010-06-01

    One of the aspects considered in the International Commission on Non-Ionizing Radiation Protection guidelines is that, in situations of simultaneous exposure to fields of different frequencies, exposure quotients for thermal and electrical stimulation effects should be examined. The aim of the present work was to analyse the electromagnetic radiation levels and exposure quotients for exposure to multiple-frequency sources in the vicinity of medium wave radio broadcasting antennas. The measurements were made with a spectrum analyser and a monopole antenna. Kriging interpolation was used to prepare contour maps and to estimate the levels in the towns and villages of the zone. The results showed that the exposure quotient criterion based on electrical stimulation effects to be more stringent than those based on thermal effects or power density levels. Improvement of dosimetry evaluations requires the spectral components of the radiation to be quantified, followed by application of the criteria for exposure to multiple-frequency sources. PMID:20159912

  4. Operation of the computer model for microenvironment atomic oxygen exposure

    NASA Technical Reports Server (NTRS)

    Bourassa, R. J.; Gillis, J. R.; Gruenbaum, P. E.

    1995-01-01

    A computer model for microenvironment atomic oxygen exposure has been developed to extend atomic oxygen modeling capability to include shadowing and reflections. The model uses average exposure conditions established by the direct exposure model and extends the application of these conditions to treat surfaces of arbitrary shape and orientation.

  5. Accumulation of ammonia in the body and NH(3) volatilization from alkaline regions of the body surface during ammonia loading and exposure to air in the weather loach Misgurnus anguillicaudatus.

    PubMed

    Tsui, T K N; Randall, D J; Chew, S F; Jin, Y; Wilson, J M; Ip, Y K

    2002-03-01

    The weather loach Misgurnus anguillicaudatus inhabits rice fields that experience drought in summer and ammonia loading during agricultural fertilisation. Exposure of specimens to ammonia led to the accumulation of ammonia in muscle, liver and blood. The level of ammonia reached in the plasma was the highest reported among fishes. Ammonia was not detoxified to urea, and urea excretion rate was unaffected by ammonia exposure. Fish acidified the water to reduce ammonia loading. Ammonia loading, unlike aerial exposure, did not induce glutamine synthesis, and there was no accumulation of glutamine. This is a unique observation different from those reported for other fishes in the literature. An initial switch to partial amino acid catabolism led to the accumulation of alanine and was probably associated with a decreased rate of ammonia production. Aerial exposure led to decreases in rates of ammonia and urea excretion, as well as the accumulation of tissue ammonia. As the internal ammonia levels increased, M. anguillicaudatus was able to excrete some ammonia in the gaseous form (NH(3)). The percentage of ammonia excreted as NH(3) increased with time of exposure and with increasing temperature. It appears that air-breathing through the gut is involved, with the anterior portion of the digestive tract playing a central role: it became significantly more alkaline in fish exposed to air or to environmental ammonia. The skin, which also became more alkaline during air exposure, may also be involved in ammonia volatilization in air-exposed fish. This represents the first report of a fish using volatilization of NH(3) as part of a defence against ammonia toxicity. It can be concluded that the main strategy adopted by M. anguillicaudatus confronted with ammonia loading or air exposure is to tolerate high ammonia levels in the tissues. During periods of elevated tissue ammonia levels, some ammonia is lost by volatilization via air-breathing using the gut. In addition, some

  6. MEASURING DIETARY EXPOSURE OF YOUNG CHILDREN

    EPA Science Inventory

    Young children do not consume foods in a structured manner. Their foods contact surfaces (hands, floors, eating surfaces, etc.) that may be contaminated while they are eating them. Thus, dietary exposures of young children are difficult to accurately assess or measure. A recen...

  7. ESTIMATING EXCESS DIETARY EXPOSURES OF YOUNG CHILDREN

    EPA Science Inventory

    Nine children in a daycare that routinely applied the pesticide, esfenvalerate, were studied to assess excess dietary exposures. Surface wipes, a standard food item of processed American cheese slice pressed on the surface and handled by the child, an accelerometer reading, and ...

  8. Understanding existing exposure situations.

    PubMed

    Lecomte, J-F

    2016-06-01

    International Commission on Radiological Protection (ICRP) Publication 103 removed the distinction between practices and interventions, and introduced three types of exposure situation: existing, planned, and emergency. It also emphasised the optimisation principle in connection with individual dose restrictions for all controllable exposure situations. Existing exposure situations are those resulting from sources, natural or man-made, that already exist when a decision on control has to be taken. They have common features to be taken into account when implementing general recommendations, such as: the source may be difficult to control; all exposures cannot be anticipated; protective actions can only be implemented after characterisation of the exposure situation; time may be needed to reduce exposure below the reference level; levels of exposure are highly dependent on individual behaviour and present a wide spread of individual dose distribution; exposures at work may be adventitious and not considered as occupational exposure; there is generally no potential for accident; many stakeholders have to be involved; and many factors need to be considered. ICRP is currently developing a series of reports related to the practical implementation of Publication 103 to various existing exposure situations, including exposure from radon, exposure from cosmic radiation in aviation, exposure from processes using naturally occurring radioactive material, and exposure from contaminated sites due to past activities. PMID:26975365

  9. DEMONSTRATION OF HUMAN EXPOSURE TOOLS

    EPA Science Inventory

    The Human Exposure and Atmospheric Sciences Division (HEASD) of the National Exposure Research Laboratory (NERL) conducts research on exposure measurements, human activity patterns, exposure and dose models, and cumulative exposures critical for the Agency to make scientificall...

  10. Particle exposures and infections

    EPA Science Inventory

    Particle exposures increase the risk for human infections. Particles can deposit in the nose, pharynx, larynx, trachea, bronchi, and distal lung and, accordingly, the respiratory tract is the system most frequently infected after such exposure; however, meningitis also occurs. Ci...

  11. EPIDEMIOLOGY AND EXPOSURE ASSESSMENT

    EPA Science Inventory

    Research collaborations between the National Health and Environmental Effects Research Laboratory (NHEERL) and the National Exposure Research Laboratory (NERL) centered on the development and application of exposure analysis tools in environmental epidemiology include the El Paso...

  12. CHAPTER ONE: EXPOSURE MEASUREMENTS.

    EPA Science Inventory

    Determining human exposure to suspended particualte concentrations requires measurements that quantify different particle properties in microenvironments where people live, work, and play. Particle mass, size, and chemical composition are important exposure variables, and these ...

  13. Integrated Exposure Assessment Monitoring.

    ERIC Educational Resources Information Center

    Behar, Joseph V.; And Others

    1979-01-01

    Integrated Exposure Assessment Monitoring is the coordination of environmental (air, water, land, and crops) monitoring networks to collect systematically pollutant exposure data for a specific receptor, usually man. (Author/BB)

  14. A long-term rock uplift rate for eastern Crete from exposure dating of marine terraces

    NASA Astrophysics Data System (ADS)

    Strobl, M.; Hetzel, R.; Ivy-Ochs, S.; Alfimov, V.; Kubik, P. W.; Fassoulas, C.; Palumbo, L.

    2009-04-01

    The island of Crete in the forearc of the Hellenic subduction zone has a rugged topography with a relief exceeding 2 km. Rock uplift rates of 2-4 mm/a were estimated previously from raised Late Holocene shorelines (Lambeck, 1995) but may not be representative on longer timescales, because earthquakes with up to 9 m of coseismic uplift have recently affected Crete (Stiros, 2001). Here we use marine terraces near Kato Zakros to quantify the long-term rock uplift rate for eastern Crete. Our field investigations and topographic profiles document a flight of at least 15 marine bedrock terraces carved into limestone bedrock. Age constraints for the terraces were obtained by 36Cl exposure dating of bedrock samples and 10Be dating of sandstone cobbles found on some terraces. Our results suggest that the terraces T4 and T5 at elevations of 68 and 76 m, respectively, formed during sea level highstands associated with marine isotope stage 5e, i.e. ~125 ka ago. Correlating the other terraces (T1 to T11) to a sea-level curve for the Red Sea (Siddall et al., 2003) indicates an uplift rate of 0.5-0.6 mm/a during the last 400 ka; significantly lower than previous estimates based on the elevation of Late Holocene shorelines. References Lambeck, K. (1995), Late Pleistocene and Holocene sea-level change in Greece and SW Turkey - a separation of eustatic, isostatic and tectonic contributions. Geophys. J. Int. 122, 1022-1044. Siddall, M., Rohling, E.J., Almogi-Labin, A., Hemleben, C., Meischner, D., Schmelzer, I., and Smeed, D.A. (2003), Sea-level fluctuations during the last glacial cycle. Nature, 423, 853-858. Stiros, S.C. (2001), The AD 365 Crete earthquake and possible seismic clustering during the fourth to sixth centuries AD in the Eastern Mediterranean: a review of historical and archaeological data. J. Struct. Geol., 23, 545-562.

  15. Opioid Antagonist Impedes Exposure.

    ERIC Educational Resources Information Center

    Merluzzi, Thomas V.; And Others

    1991-01-01

    Thirty spider-phobic adults underwent exposure to 17 phobic-related, graded performance tests. Fifteen subjects were assigned to naltrexone, an opioid antagonist, and 15 were assigned to placebo. Naltrexone had a significant effect on exposure, with naltrexone subjects taking significantly longer to complete first 10 steps of exposure and with…

  16. DIETARY EXPOSURE MEASUREMENTS

    EPA Science Inventory

    This research constitutes the MCEARD base dietary exposure research program and is conducted to complement the NERL total human exposure program. The research builds on previous work to reduce the level of uncertainty in exposure assessment by improving NERL's ability to evaluat...

  17. GUIDELINES FOR EXPOSURE ASSESSMENT

    EPA Science Inventory

    The Guidelines for Exposure Assessment describe the general concepts of exposure assessment including definitions and associated units, and by providing guidance on the planning and conducting of an exposure assessment. Guidance is also provided on presenting the results of the e...

  18. HUMAN EXPOSURE ACTIVITY PATTERNS

    EPA Science Inventory

    Human activity/uptake rate data are necessary to estimate potential human exposure and intake dose to environmental pollutants and to refine human exposure models. Personal exposure monitoring studies have demonstrated the critical role that activities play in explaining and pre...

  19. Radiation exposure in the moon environment

    NASA Astrophysics Data System (ADS)

    Reitz, Guenther; Berger, Thomas; Matthiae, Daniel

    2012-12-01

    During a stay on the moon humans are exposed to elevated radiation levels due to the lack of substantial atmospheric and magnetic shielding compared to the Earth's surface. The absence of magnetic and atmospheric shielding allows cosmic rays of all energies to impinge on the lunar surface. Beside the continuous exposure to galactic cosmic rays (GCR), which increases the risk of cancer mortality, exposure through particles emitted in sudden nonpredictable solar particle events (SPE) may occur. SPEs show an enormous variability in particle flux and energy spectra and have the potential to expose space crew to life threatening doses. On Earth, the contribution to the annual terrestrial dose of natural ionizing radiation of 2.4 mSv by cosmic radiation is about 1/6, whereas the annual exposure caused by GCR on the lunar surface is roughly 380 mSv (solar minimum) and 110 mSv (solar maximum). The analysis of worst case scenarios has indicated that SPE may lead to an exposure of about 1 Sv. The only efficient measure to reduce radiation exposure is the provision of radiation shelters. Measurements on the lunar surface performed during the Apollo missions cover only a small energy band for thermal neutrons and are not sufficient to estimate the exposure. Very recently some data were added by the Radiation Dose Monitoring (RADOM) instrument operated during the Indian Chandrayaan Mission and the Cosmic Ray Telescope (CRaTER) instrument of the NASA LRO (Lunar Reconnaisance Orbiter) mission. These measurements need to be complemented by surface measurements. Models and simulations that exist describe the approximate radiation exposure in space and on the lunar surface. The knowledge on the radiation exposure at the lunar surface is exclusively based on calculations applying radiation transport codes in combination with environmental models. Own calculations are presented using Monte-Carlo simulations to calculate the radiation environment on the moon and organ doses on the

  20. [Forensic medical expertise of the injurious exposure].

    PubMed

    Shadymov, A B

    2014-01-01

    The objective of the present study was to develop the standardized approach to the evaluation of the character of injurious exposure with a view to objective interpretation of the conditions of injury formation and the properties of the traumatic agent. The main attention was given to such parameters of the injurious exposure as loading conditions (mass, speed, direction) and the surface properties of the traumatic agent (area, shape, hardness). It is expected that the use of the proposed system for the evaluation of the injurious exposure in the practical work of forensic medical experts will enhance the reliability of their conclusions and help to avoid mistakes. PMID:25269168

  1. Assessing occupational exposure to sea lamprey pesticides

    PubMed Central

    Ceballos, Diana M; Beaucham, Catherine C; Kurtz, Kristine; Musolin, Kristin

    2015-01-01

    Background: Sea lampreys are parasitic fish found in lakes of the United States and Canada. Sea lamprey is controlled through manual application of the pesticides 3-trifluoromethyl-4-nitrophenol (TFM) and BayluscideTM into streams and tributaries. 3-Trifluoromethyl-4-nitrophenol may cause irritation and central nervous system depression and Bayluscide may cause irritation, dermatitis, blisters, cracking, edema, and allergic skin reactions. Objectives: To assess occupational exposures to sea lamprey pesticides. Methods: We developed a wipe method for evaluating surface and skin contamination with these pesticides. This method was field tested at a biological field station and at a pesticide river application. We also evaluated exposures using control banding tools. Results: We verified TFM surface contamination at the biological station. At the river application, we found surfaces and worker’s skin contaminated with pesticides. Conclusion: We recommended minimizing exposures by implementing engineering controls and improved use of personal protective equipment. PMID:25730600

  2. PROSE treatment for lagophthalmos and exposure keratopathy.

    PubMed

    Gire, Anisa; Kwok, Alan; Marx, Douglas P

    2013-01-01

    Prosthetic replacement of the ocular surface ecosystem is a treatment developed by the Boston Foundation for Sight that uses a Food and Drug Administration-approved prosthetic device for the treatment of severe ocular surface disease to improve vision and discomfort in addition to supporting the ocular surface. Facial nerve paralysis has multiple causes including trauma, surgery, tumor, stroke, and congenital lagophthalmos. Subsequent lagophthalmos leading to exposure keratitis has been treated with copious lubrication, tarsorrhapy, eyelid weights, chemodenervation to yield protective ptosis, and palpebral spring insertion. Each of these treatments, however, has limitations and potential complications. The prosthetic replacement of the ocular surface ecosystem device provides a liquid bandage to protect the cornea from eyelid interaction and dessication in addition to improving vision. This report describes 4 patients with exposure keratitis who were successfully treated with prosthetic replacement of the ocular surface ecosystem devices at 2 clinical sites. PMID:23034688

  3. Monitoring occupational exposure to carcinogens.

    PubMed

    Schoket, B

    1993-01-01

    32P-Postlabelling has been used for biomonitoring occupational exposure to complex mixtures of polycyclic aromatic hydrocarbons in iron foundries, coke oven and aluminium plants and among roofers and surface-coating workers. Enhanced levels of aromatic DNA adducts have been detected in exposed populations in comparison to controls. Dose-related adduct formation has been found in iron foundry and coke-oven workers and roofers. The importance of longitudinal biomonitoring has been shown in two aluminium plants. Comparison between 32P-postlabelling and immunoassays revealed wide variations. DNA adduct levels obtained by the current methods should thus be regarded as relative values between individuals and control and exposure groups. PMID:8225504

  4. Exposure factors resources: contrasting EPA's Exposure Factors Handbook with international sources.

    PubMed

    Phillips, Linda J; Moya, Jacqueline

    2014-01-01

    Efforts to compile and standardize human exposure factors have resulted in the development of a variety of resources available to the scientific community. For example, the US Environmental Protection Agency (EPA) developed the Exposure Factors Handbook and Child-specific Exposure Factors Handbook to promote consistency among its various exposure-assessment activities. The US EPA handbooks are compilations of human exposure factors data, including anthropometric and sociocultural data (e.g., body weights, skin-surface areas, and life expectancy), behavioral data (e.g., non-dietary ingestion rates, activity/time use patterns, and consumer product use), factors that may be influenced by the physiological needs of the body, metabolic activity, and health and weight status (e.g., water and food intake, and inhalation rates), and other factors (e.g., building characteristics). Other countries have engaged in similar efforts to compile and standardize exposure factors for use in exposure and risk assessments. For example, the ExpoFacts database contains data for 30 European Union countries. Australia, Canada, Japan, Korea, and Taiwan have developed, or are developing, documents that provide exposure factors data relevant to their populations. The purpose of this paper is to provide an overview of some of the available exposure factors resources; to explore some of the similarities and differences between the US EPA Exposure Factors Handbook and selected other international resources, and to highlight data gaps and present some considerations for promoting consistency among these resources. PMID:23611905

  5. EXAMPLE EXPOSURE SCENARIOS ASSESSMENT TOOL

    EPA Science Inventory

    Exposure scenarios are a tool to help the assessor develop estimates of exposure, dose, and risk. An exposure scenario generally includes facts, data, assumptions, inferences, and sometimes professional judgment about how the exposure takes place. The human physiological and beh...

  6. Enhanced eryptosis following gramicidin exposure.

    PubMed

    Malik, Abaid; Bissinger, Rosi; Liu, Guoxing; Liu, Guilai; Lang, Florian

    2015-05-01

    The peptide antibiotic and ionophore gramicidin has previously been shown to trigger apoptosis of nucleated cells. In analogy to apoptosis, the suicidal death of erythrocytes or eryptosis involves cell shrinkage and cell membrane scrambling with phosphatidylserine translocation to the erythrocyte surface. Triggers of eryptosis include oxidative stress, increase of cytosolic Ca2+ activity ([Ca2+]i), and ceramide. The present study explored, whether gramicidin triggers eryptosis. To this end phosphatidylserine exposure at the cell surface was estimated from annexin V binding, cell volume from forward scatter, red blood cell distribution width (RDW) from electronic particle counting, reactive oxidant species (ROS) from 2',7'-dichlorodihydrofluorescein diacetate (DCFDA) fluorescence, [Ca2+]i from Fluo3- and Fluo4 fluorescence, and ceramide abundance from binding of specific antibodies. As a result, a 24 h exposure of human erythrocytes to gramicidin significantly increased the percentage of annexin-V-binding cells (≥1 µg/mL), forward scatter (≥0.5 µg/mL) and hemolysis. Gramicidin enhanced ROS activity, [Ca2+]i and ceramide abundance at the erythrocyte surface. The stimulation of annexin-V-binding by gramicidin was significantly blunted but not abolished by removal of extracellular Ca2+. In conclusion, gramicidin stimulates phospholipid scrambling of the erythrocyte cell membrane, an effect at least partially due to induction of oxidative stress, increase of [Ca2+]i and up-regulation of ceramide abundance. Despite increase of [Ca2+]i, gramicidin increases cell volume and slightly reduces RWD. PMID:25915718

  7. Enhanced Eryptosis Following Gramicidin Exposure

    PubMed Central

    Malik, Abaid; Bissinger, Rosi; Liu, Guoxing; Liu, Guilai; Lang, Florian

    2015-01-01

    The peptide antibiotic and ionophore gramicidin has previously been shown to trigger apoptosis of nucleated cells. In analogy to apoptosis, the suicidal death of erythrocytes or eryptosis involves cell shrinkage and cell membrane scrambling with phosphatidylserine translocation to the erythrocyte surface. Triggers of eryptosis include oxidative stress, increase of cytosolic Ca2+ activity ([Ca2+]i), and ceramide. The present study explored, whether gramicidin triggers eryptosis. To this end phosphatidylserine exposure at the cell surface was estimated from annexin V binding, cell volume from forward scatter, red blood cell distribution width (RDW) from electronic particle counting, reactive oxidant species (ROS) from 2',7'-dichlorodihydrofluorescein diacetate (DCFDA) fluorescence, [Ca2+]i from Fluo3- and Fluo4 fluorescence, and ceramide abundance from binding of specific antibodies. As a result, a 24 h exposure of human erythrocytes to gramicidin significantly increased the percentage of annexin-V-binding cells (≥1 µg/mL), forward scatter (≥0.5 µg/mL) and hemolysis. Gramicidin enhanced ROS activity, [Ca2+]i and ceramide abundance at the erythrocyte surface. The stimulation of annexin-V-binding by gramicidin was significantly blunted but not abolished by removal of extracellular Ca2+. In conclusion, gramicidin stimulates phospholipid scrambling of the erythrocyte cell membrane, an effect at least partially due to induction of oxidative stress, increase of [Ca2+]i and up-regulation of ceramide abundance. Despite increase of [Ca2+]i, gramicidin increases cell volume and slightly reduces RWD. PMID:25915718

  8. Silica dust exposures during selected construction activities.

    PubMed

    Flanagan, Mary Ellen; Seixas, Noah; Majar, Maria; Camp, Janice; Morgan, Michael

    2003-01-01

    This study characterized exposure for dust-producing construction tasks. Eight common construction tasks were evaluated for quartz and respirable dust exposure by collecting 113 personal task period samples for cleanup; demolition with handheld tools; concrete cutting; concrete mixing; tuck-point grinding; surface grinding; sacking and patching concrete; and concrete floor sanding using both time-integrating filter samples and direct-reading respirable dust monitors. The geometric mean quartz concentration was 0.10 mg/m(3) (geometric standard deviation [GSD]=4.88) for all run time samples, with 71% exceeding the threshold limit value. Activities with the highest exposures were surface grinding, tuck-point grinding, and concrete demolition (GM[GSD] of 0.63[4.12], 0.22[1.94], and 0.10[2.60], respectively). Factors recorded each minute were task, tool, work area, respiratory protection and controls used, estimated cross draft, and whether anyone nearby was making dust. Factors important to exposure included tool used, work area configuration, controls employed, cross draft, and in some cases nearby dust. More protective respirators were employed as quartz concentration increased, although respiratory protection was found to be inadequate for 42% of exposures. Controls were employed for only 12% of samples. Exposures were reduced with three controls: box fan for surface grinding and floor sanding, and vacuum/shroud for surface grinding, with reductions of 57, 50, and 71%, respectively. Exposures were higher for sweeping compound, box fan for cleanup, ducted fan dilution, and wetted substrate. Construction masons and laborers are frequently overexposed to silica. The usual protection method, respirators, was not always adequate, and engineering control use was infrequent and often ineffective. PMID:12809537

  9. Skin Exposure and Asthma

    PubMed Central

    Redlich, Carrie A.

    2010-01-01

    Numerous occupational and environmental exposures that increase asthma risk have been identified. Research and prevention have focused primarily on the respiratory tract. However, recent studies suggest that the skin may also be an important route of exposure and site of sensitization that contributes to asthma development. Factors that impair skin barrier function, such as filaggrin gene mutations or skin trauma, may facilitate allergen entry and promote Th2-like sensitization and subsequent asthma. Animal studies demonstrate that skin exposure to chemical and protein allergens is highly effective at inducing sensitization, with subsequent inhalation challenge eliciting asthmatic responses. A similar role for human skin exposure to certain sensitizing agents, such as isocyanates, is likely. Skin exposure methodologies are being developed to incorporate skin exposure assessment into epidemiology studies investigating asthma risk factors. PMID:20427586

  10. Biomarkers of xenobiotic exposures

    SciTech Connect

    Brewster, M.A.

    1988-07-01

    Direct measurement of xenobiotic (foreign) chemicals is not always feasible as an exposure assessment,--owing to rapid metabolism, sequestration into fatty tissues, or lack of suitable assay methods. Furthermore, suspect exposures often involve complex mixtures of organics. In these circumstances, indirect biomarkers of exposure can be most helpful. This paper reviews four urinary parameters that hold promise as biomarkers of exposure in occupational and environmental settings: glucaric acid (end-product of the glucuronidation pathway), thioethers (end-product of glutathione reaction with electrophilic or alkylating agents), porphyrin pattern (altered with disruption in heme biosynthesis), and the Ames mutagenicity test. 112 references.

  11. EFFECT OF SODIUM [36CL]CHLORATE DOSE ON TOTAL RADIOACTIVE RESIDUES AND RESIDUES OF PARENT CHLORATE IN GROWING SWINE

    Technology Transfer Automated Retrieval System (TEKTRAN)

    An experimental chlorate-based product has shown to be efficacious in eliminating economically important, Gram-negative human pathogens in the gastrointestinal tracts of food animals. Prior to the commercial marketing of such a product, the magnitude and chemical nature of residues remaining in edib...

  12. 36Cl and41Ca depth profiles in a Hiroshima granite stone and the Dosimetry System 1986

    NASA Astrophysics Data System (ADS)

    Rühm, W.; Kato, K.; Korschinek, G.; Morinaga, H.; Nolte, E.

    1992-06-01

    For the first time a depth profile of the radioisotope41Ca produced by neutrons from the atomic bomb explosion of Hiroshima was measured. The measurements were performed at the Munich Tandem Laboratory via accelerator mass spectrometry. The41Ca depth profile is part of the evaluation to determine the neutron spectrum of the A-bomb which is basis of the Dosimetry System 1986.

  13. EFFECT OF DOSE ON RESIDUES AND DISPOSITION OF AN EXPERIMENTAL 36CL-CHLORATE PRODUCT IN BROILERS.

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Because pathogenic Salmonella species and E. coli O157:H7 have significant impacts on human health and on the food animal industry, pre-harvest intervention techniques are being pursued to control these bacteria in food animals. An experimental sodium chlorate product (ECP) consistently reduces or e...

  14. Effects of sodium chloride exposure on ion regulation in larvae (glochidia) of the freshwater mussel Lampsilis fasciola.

    PubMed

    Nogueira, Lygia S; Bianchini, Adalto; Wood, Chris M; Loro, Vania L; Higgins, Sarah; Gillis, Patricia L

    2015-12-01

    The salinization of freshwater can have negative effects on ecosystem health, with heightened effects in salt-sensitive biota such as glochidia, the larvae of freshwater mussels. However, the toxicological mechanism underlying this sensitivity is unknown. Therefore, Lampsilis fasciola glochidia were exposed to NaCl (nominally 0.25 and 1.0 g/L) prepared in reconstituted moderately-hard water (control), as well as to a dilution of that water (1:4) with ultrapure reference water (diluted control). Unidirectional Na(+) influx (measured with (22)Na) was evaluated after 1, 3 and 48 h of exposure. In addition, unidirectional Cl(-) influx (measured with (36)Cl), whole-body ion (Cl(-) and Na(+)) concentrations, and glochidia viability (measured as the ability to close valves) were assessed after 48 h of exposure. Significantly reduced glochidia viability (56%) was observed after exposure to 1.0 g/L NaCl. Na(+) influx was significantly higher in glochidia exposed to both 0.25 and 1.0 g/L NaCl for 1h than in those kept under control conditions. After 3 and 48 h of exposure, differences in Na(+) influx rate between salt-exposed and control glochidia were generally reduced, indicating that larvae may be able to, at least temporarily, recover their ability to regulate Na(+) influx when exposed to elevated NaCl concentration. Compared to the moderately-hard water control, whole-body Na(+) and Cl(-) concentrations were relatively unchanged in glochidia exposed to 0.25 g/L NaCl, but were significantly elevated in glochidia exposed to 1.0 g/L NaCl and the diluted control. While Na(+) influx rate had recovered to the control level after 48 h of exposure to 1.0 g/L NaCl, Cl(-) influx rate remained elevated, being ~7-fold higher than the Na(+) influx rate. These findings suggest that the loss of viability observed when glochidia were exposed to a high NaCl concentration (1.0 g/L) could be caused by ionoregulatory disturbances mainly associated with an elevated Cl(-) influx. PMID

  15. MODEL DEVELOPMENT - EXPOSURE MODELS

    EPA Science Inventory

    Humans are exposed to mixtures of chemicals from multiple pathways and routes. These exposures may result from a single event or may accumulate over time if multiple exposure events occur. The traditional approach of assessing risk from a single chemical and a single route of e...

  16. IMMUNOASSAY HUMAN EXPOSURE STUDIES

    EPA Science Inventory

    The Human Exposure Research Branch has developed several enzyme-linked immunosorbent assay (ELISA) methods to support human exposure assessment studies. Immunoassays to detect low levels (<10 ng/mL) of chlorpyrifos in food, track-in dirt and house dust have been applied to sam...

  17. Environmental Exposures and Development

    PubMed Central

    Mattison, Donald R.

    2010-01-01

    Structured Abstract Purpose of Review Summarize recent studies exploring the relationship between paternal and maternal environmental exposures to chemicals before, at the time of and after conception to adverse developmental outcomes including; preterm birth, death, structural and functional abnormalities and growth restriction. Recent Findings Recent studies have demonstrated that human pregnancy and development is vulnerable to environmental exposures of the father and mother to chemical, biological and physical agents. Exposures associated with adverse developmental outcomes include; air and water pollution, chemicals in foods, occupational exposures, agricultural chemicals, metals, persistent and volatile organics. Developmental endpoints which are linked with these exposures include; growth restriction, functional abnormalities, structural abnormalities, preterm delivery and death. Despite this general understanding we still have incomplete knowledge concerning most exposures and the biological interactions responsible for impaired development and preterm delivery. Summary While single genes and individual chemical exposures are responsible for some instances of adverse pregnancy outcome or developmental disease, gene-environment interactions are responsible for the majority. These gene-environment interactions may occur in the father, mother, placenta or fetus suggesting that critical attention be given to maternal and paternal exposures and gene expression as they relate to the mode of action of the putative developmental toxicant both prior to and during pregnancy. PMID:20216314

  18. EXPOSURES TO ENVIRONMENTAL AGENTS

    EPA Science Inventory

    The planned interagency National Children's Study (NCS) will be studying a number of exposure issues in the context of health and well-being of infants and young children from pre-conception to age 21. Some of the important environmental exposure questions for NCS, include: how c...

  19. Avian inhalation exposure chamber

    DOEpatents

    Briant, J.K.; Driver, C.J.

    1992-05-05

    An exposure system is designed for delivering gaseous material ranging in particle size from 0.4 micrometers to 20.0 micrometers uniformly to the heads of experimental animals, primarily birds. The system includes a vertical outer cylinder and a central chimney with animal holding bottles connected to exposure ports on the vertical outer cylinder. 2 figs.

  20. Avian inhalation exposure chamber

    DOEpatents

    Briant, James K.; Driver, Crystal J.

    1992-01-01

    An exposure system for delivering gaseous material ranging in particle size from 0.4 micrometers to 20.0 micrometers uniformly to the heads of experimental animals, primarily birds. The system includes a vertical outer cylinder and a central chimney with animal holding bottles connected to exposure ports on the vertical outer cylinder.

  1. Exposure Corrections for Macrophotography

    ERIC Educational Resources Information Center

    Nikolic, N. M.

    1976-01-01

    Describes a method for determining the exposure correction factors in close-up photography and macrophotography. The method eliminates all calculations during picture-taking, and allows the use of a light meter to obtain the proper f-stop/exposure time combinations. (Author/MLH)

  2. Solar exposure of LDEF experiment trays

    NASA Technical Reports Server (NTRS)

    Bourassa, R. J.; Gillis, J. R.

    1992-01-01

    Exposure to solar radiation is one of the primary causes of degradation of materials on spacecraft. Accurate knowledge of solar exposure is needed to evaluate the performance of materials carried on the Long Duration Exposure Facility (LDEF) during its nearly 6 year orbital flight. Presented here are tables and figures of calculated solar exposure for the experiment rows, longerons, and end bays of the spacecraft as functions of time in orbit. The data covers both direct solar and earth reflected radiation. Results are expressed in cumulative equivalent sun hours (CESH) or the hours of direct, zero incidence solar radiation that would cause the same irradiance of a surface. Space end bays received the most solar radiation, 14,000 CESH; earth end bays received the least, 4,500 CESH. Row locations received between 6,400 CESH and 11,200 CESH with rows facing either eastward or westward receiving the most radiation and rows facing northward or southward receiving the least.

  3. Atmospheric Ionizing Radiation and Human Exposure

    NASA Technical Reports Server (NTRS)

    Wilson, J. W.; Goldhagen, P.; Friedberg, W.; DeAngelis, G.; Clem, J. M.; Copeland, K.; Bidasaria, H. B.

    2004-01-01

    Atmospheric ionizing radiation is of interest, apart from its main concern of aircraft exposures, because it is a principal source of human exposure to radiations with high linear energy transfer (LET). The ionizing radiations of the lower atmosphere near the Earth s surface tend to be dominated by the terrestrial radioisotopes especially along the coastal plain and interior low lands and have only minor contributions from neutrons (11 percent). The world average is substantially larger but the high altitude cities especially have substantial contributions from neutrons (25 to 45 percent). Understanding the world distribution of neutron exposures requires an improved understanding of the latitudinal, longitudinal, altitude and spectral distribution that depends on local terrain and time. These issues are being investigated in a combined experimental and theoretical program. This paper will give an overview of human exposures and describe the development of improved environmental models.

  4. Atmospheric Ionizing Radiation and Human Exposure

    NASA Technical Reports Server (NTRS)

    Wilson, John W.; Mertens, Christopher J.; Goldhagen, Paul; Friedberg, W.; DeAngelis, G.; Clem, J. M.; Copeland, K.; Bidasaria, H. B.

    2005-01-01

    Atmospheric ionizing radiation is of interest, apart from its main concern of aircraft exposures, because it is a principal source of human exposure to radiations with high linear energy transfer (LET). The ionizing radiations of the lower atmosphere near the Earth s surface tend to be dominated by the terrestrial radioisotopes. especially along the coastal plain and interior low lands, and have only minor contributions from neutrons (11 percent). The world average is substantially larger but the high altitude cities especially have substantial contributions from neutrons (25 to 45 percent). Understanding the world distribution of neutron exposures requires an improved understanding of the latitudinal, longitudinal, altitude and spectral distribution that depends on local terrain and time. These issues are being investigated in a combined experimental and theoretical program. This paper will give an overview of human exposures and describe the development of improved environmental models.

  5. In-vacuum exposure shutter

    DOEpatents

    Johnson, Terry A.; Replogle, William C.; Bernardez, Luis J.

    2004-06-01

    An in-vacuum radiation exposure shutter device can be employed to regulate a large footprint light beam. The shutter device includes (a) a source of radiation that generates an energy beam; (2) a shutter that includes (i) a frame defining an aperture toward which the energy beam is directed and (ii) a plurality of blades that are secured to the frame; and (3) device that rotates the shutter to cause the plurality of blades to intercept or allow the energy beam to travel through the aperture. Each blade can have a substantially planar surface and the plurality of blades are secured to the frame such that the planar surfaces of the plurality of blades are substantially parallel to each other. The shutter device is particularly suited for operation in a vacuum environment and can achieve shuttering speeds from about 0.1 second to 0.001 second or faster.

  6. Long Duration Exposure Facility

    NASA Technical Reports Server (NTRS)

    1995-01-01

    The Long Duration Exposure Facility (LDEF) materials were useful for testing technical concepts that needed to be validated for the Cosmic Dust Collector Facility (CDCF) - a large instrument that was under study for inclusion on the upcoming Space Station. As it turned out, CDCF, which was approved at one point as an external payload, was ultimately canceled due to the scaling back of the Space Station capabilities. However, the study of cosmic dust is still a field of great interest for NASA, being the crucial part of at least one experiment that is still being considered for a Discovery mission. The optimum analysis of hypervelocity impacts is thus a continuing NASA concern. Two experiments, AO187-1 and AO187-2 were explicitly designed to measure the flux and composition of dust particles impacting LDEF. The former consisted of flat targets of Au and Al while the second comprised a set of 237 "capture cells" using Ge target plates covered by thin (2.5 microns) metallized plastic foils. The spacecraft maintained a constant orientation with respect to its velocity vector thereby defining leading and trailing edges that faced respectively into and away from the direction of motion. Both AO187-1 and AO187-2 had detectors on both the leading and trailing edges of LDEF. It was expected that interplanetary dust particles would dominate impacts on the trailing edge while the leading edge would be exposed to both cosmic dust and particles of orbital manmade debris. In AO187-1, the compositions of the impactors was determined by SEM-EDS techniques; in AO187-2 a sensitive surface analysis technique - SIMS - was used to determine both elemental and (some) isotopic compositions. In the initial analysis of AO187-2, it was found that SIMS was more sensitive for the analysis of thin impact debris layers than SEM-EDS. The present grant was made to determine if SIMS analysis could also be applied to impacts recorded in the Au surfaces of AO187-1. Success would extend the analysis

  7. RESIDENTIAL POST-APPLICATION EXPOSURE MONITORING

    EPA Science Inventory

    Methods of measurement of pesticide exposures can be separated into two categories: direct and indirect (Briston et al., 1984, Nigg et al. 1990). Direct methods measure a pesticide residue in environmental media or on the skin surface before it has entered the body in order to e...

  8. 30 CFR 57.5002 - Exposure monitoring.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Exposure monitoring. 57.5002 Section 57.5002... SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Air Quality, Radiation, Physical Agents, and Diesel Particulate Matter Air Quality-Surface and Underground § 57.5002...

  9. 30 CFR 57.5002 - Exposure monitoring.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Exposure monitoring. 57.5002 Section 57.5002... SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Air Quality, Radiation, Physical Agents, and Diesel Particulate Matter Air Quality-Surface and Underground § 57.5002...

  10. 30 CFR 57.5002 - Exposure monitoring.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Exposure monitoring. 57.5002 Section 57.5002... SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Air Quality, Radiation, Physical Agents, and Diesel Particulate Matter Air Quality-Surface and Underground § 57.5002...

  11. 30 CFR 57.5002 - Exposure monitoring.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Exposure monitoring. 57.5002 Section 57.5002... SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Air Quality, Radiation, Physical Agents, and Diesel Particulate Matter Air Quality-Surface and Underground § 57.5002...

  12. CHILDREN'S EXPOSURES TO ENDOCRINE DISRUPTING CHEMICALS

    EPA Science Inventory

    EPA is committed to protecting children's health by identifying, assessing, and reducing the risks from chemicals present in the air they breathe, food they eat, water they drink, and surfaces they touch. The Agency is committed to understanding the extent of children's exposure...

  13. The Diesel Exhaust in Miners Study: II. Exposure monitoring surveys and development of exposure groups.

    PubMed

    Coble, Joseph B; Stewart, Patricia A; Vermeulen, Roel; Yereb, Daniel; Stanevich, Rebecca; Blair, Aaron; Silverman, Debra T; Attfield, Michael

    2010-10-01

    Air monitoring surveys were conducted between 1998 and 2001 at seven non-metal mining facilities to assess exposure to respirable elemental carbon (REC), a component of diesel exhaust (DE), for an epidemiologic study of miners exposed to DE. Personal exposure measurements were taken on workers in a cross-section of jobs located underground and on the surface. Air samples taken to measure REC were also analyzed for respirable organic carbon (ROC). Concurrent measurements to assess exposure to nitric oxide (NO) and nitrogen dioxide (NO₂), two gaseous components of DE, were also taken. The REC measurements were used to develop quantitative estimates of average exposure levels by facility, department, and job title for the epidemiologic analysis. Each underground job was assigned to one of three sets of exposure groups from specific to general: (i) standardized job titles, (ii) groups of standardized job titles combined based on the percentage of time in the major underground areas, and (iii) larger groups based on similar area carbon monoxide (CO) air concentrations. Surface jobs were categorized based on their use of diesel equipment and proximity to DE. A total of 779 full-shift personal measurements were taken underground. The average REC exposure levels for underground jobs with five or more measurements ranged from 31 to 58 μg m⁻³ at the facility with the lowest average exposure levels and from 313 to 488 μg m⁻³ at the facility with the highest average exposure levels. The average REC exposure levels for surface workers ranged from 2 to 6 μg m⁻³ across the seven facilities. There was much less contrast in the ROC compared with REC exposure levels measured between surface and underground workers within each facility, as well as across the facilities. The average ROC levels underground ranged from 64 to 195 μg m⁻³, while on the surface, the average ROC levels ranged from 38 to 71 μg m⁻³ by facility, an ∼2- to 3-fold difference. The average

  14. Occupational exposure in MRI.

    PubMed

    McRobbie, D W

    2012-04-01

    This article reviews occupational exposure in clinical MRI; it specifically considers units of exposure, basic physical interactions, health effects, guideline limits, dosimetry, results of exposure surveys, calculation of induced fields and the status of the European Physical Agents Directive. Electromagnetic field exposure in MRI from the static field B(0), imaging gradients and radiofrequency transmission fields induces electric fields and currents in tissue, which are responsible for various acute sensory effects. The underlying theory and its application to the formulation of incident and induced field limits are presented. The recent International Commission on Non-Ionizing Radiation Protection (ICNIRP) Bundesministerium für Arbeit und Soziales and Institute of Electrical and Electronics Engineers limits for incident field exposure are interpreted in a manner applicable to MRI. Field measurements show that exposure from movement within the B(0) fringe field can exceed ICNIRP reference levels within 0.5 m of the bore entrance. Rate of change of field dB/dt from the imaging gradients is unlikely to exceed the new limits, although incident field limits can be exceeded for radiofrequency (RF) exposure within 0.2-0.5 m of the bore entrance. Dosimetric surveys of routine clinical practice show that staff are exposed to peak values of 42 ± 24% of B(0), with time-averaged exposures of 5.2 ± 2.8 mT for magnets in the range 0.6-4 T. Exposure to time-varying fields arising from movement within the B(0) fringe resulted in peak dB/dt of approximately 2 T s(-1). Modelling of induced electric fields from the imaging gradients shows that ICNIRP-induced field limits are unlikely to be exceeded in most situations; however, movement through the static field may still present a problem. The likely application of the limits is discussed with respect to the reformulation of the European Union (EU) directive and its possible implications for MRI. PMID:22457400

  15. Biomonitoring - An Exposure Science Tool for Exposure and Risk Assessment

    EPA Science Inventory

    Biomonitoring studies of environmental stressors are useful for confirming exposures, estimating dose levels, and evaluating human health risks. However, the complexities of exposure-biomarker and biomarker-response relationships have limited the use of biomarkers in exposure sc...

  16. Occupational arsine gas exposure.

    PubMed Central

    Pullen-James, Shayla; Woods, Scott E.

    2006-01-01

    Arsine gas exposure is a rare occupational event and can be completely prevented with the use of appropriate protective gear. Exposure often occurs when arsine gas is generated while arsenic-containing crude ores or metals are treated with acid. Cases of toxicity require an index of suspicion and a good history. In particular, it should be in the differential diagnosis in patients who present acutely with red/bronze skin and hemoglobinuria. Treatment is supportive and may include transfusions and dialysis in severe cases. Clinical severity is proportionate to the level of exposure, and severity is directly related to the onset of symptoms. Images Figure 2 PMID:17225850

  17. Operation of the computer model for microenvironment solar exposure

    NASA Technical Reports Server (NTRS)

    Gillis, J. R.; Bourassa, R. J.; Gruenbaum, P. E.

    1995-01-01

    A computer model for microenvironmental solar exposure was developed to predict solar exposure to satellite surfaces which may shadow or reflect on one another. This document describes the technical features of the model as well as instructions for the installation and use of the program.

  18. Exposure History of Shergottites Dar Al Gani 476/489/670/735 and Sayh Al Uhaymir 005

    SciTech Connect

    Nishiizumi, N.; Caffee, M.; Jull, A.J.T.; Klandrud, S.E.

    2001-04-01

    Four basaltic shergottites, Dar al Gani (DaG) 476, 489, 670, and 735 were found in the Libyan Sahara [1-3]; two basaltic shergottites, Sayh al Uhaymir (SaU) 005 and 008 were found in Oman [4]. Recently SaU 051 was also recognized as a possible pair of SaU 005/008. Although the collection sites were different, the texture, bulk chemical compositions, and noble gas compositions of these shergottites are similar [e.g. 4]. However, cosmic-ray-produced noble gases alone cannot unambiguously constrain the irradiation history for these objects. From a combination of cosmogenic stable- and radionuclides, exposure histories, and ejection conditions from the hypothesized Martian parent body, and genetic relationships between the Martian meteorites can be determined. In addition to those nuclides produced by galactic cosmic rays (GCR) are those produced by solar cosmic rays (SCR). Radionuclides produced by SCRs reside in the uppermost few centimeters of extraterrestrial bodies and their presence in meteorites indicates the degree to which a meteorite has been ablated. Previous work shows ablation is less than 1-2 cm in at least three shergottites, ALH 77005, Shergotty, and EETA79001 [e.g. 5] and so it is possible some SCR signal may be observed in these meteorites. This suggests that the atmospheric entry velocity and/or entry angle of these shergottites is much lower than the velocity and/or entry angle of most ordinary chondrites. We report here preliminary results of cosmogenic nuclides, {sup 14}C (half-life = 5,730 yr), {sup 36}Cl (3.01 x 10{sup 5} yr), {sup 26}Al (7.05 x 10{sup 5} yr), and {sup 10}Be(1.5 x 10{sup 6} yr).

  19. Accelerator mass spectrometry in the biomedical sciences: applications in low-exposure biomedical and environmental dosimetry

    NASA Astrophysics Data System (ADS)

    Felton, J. S.; Turteltaub, K. W.; Vogel, J. S.; Balhorn, R.; Gledhill, B. L.; Southon, J. R.; Caffee, M. W.; Finkel, R. C.; Nelson, D. E.; Proctor, I. D.; Davis, J. C.

    1990-12-01

    We are utilizing accelerator mass spectrometry as a sensitive detector for tracking the disposition of radioisotopically labeled molecules in the biomedical sciences. These applications have shown the effectiveness of AMS as a tool to quantify biologically important molecules at extremely low levels. For example, AMS is being used to determine the amount of carcinogen covalently bound to animal DNA (DNA adduct) at levels relevent to human exposure. Detection sensitivities are 1 carcinogen molecule bound in 1011 to 1012 DNA bases, depending on the specific activity of the radiolabeled carcinogen. Studies have been undertaken in our laboratory utilizing heterocyclic amine food-borne carcinogens and 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD), a potent environmental carcinogen, to study the metabolism of carcinogens at low doses. In addition, AMS is being used to detect the presence of rare proteins (mutant forms of protamine) in human sperm. Approximately l per 106 sperm analyzed contain the rare form of the protamine. Protamine isolated from this small number of cells is being analyzed by AMS, following 14C labeling. Thus, AMS can be used to verify the identity of an extremely small amount of biological material. Furthermore, an additional improvement of 2 orders of magnitude in the sensitivity of biomédical tracer studies is suggested by preliminary work with bacterial hosts depleted in radiocarbon. Other problems in the life sciences where detection sensitivity or sample sizes are limitations should also benefit from AMS. Studies are underway to measure the molecular targeting of cancer chemotherapeutics in human tissue and to pursue applications for receptor biology. We are also applying other candidate isotopes, such as 3H (double labeling with 14C) and 41Ca (bone absorption) to problems in biology. The detection of 36Cl and 26Al have applications for determination of human neutron exposure and understanding neurological toxicity, respectively. The results

  20. Human Health Effects Associated with Exposure to Toxic Cyanobacteria

    EPA Science Inventory

    Reports of toxic cyanobacteria blooms are increasing worldwide. Warming and eutrophic surface water systems support the development of blooms. We examine the evidence for adverse human health effects associated with exposure to toxic blooms in drinking water, recreational water a...

  1. Residential Radon Exposure and Risk of Lung Cancer in Missouri

    Cancer.gov

    A case-control study of lung cancer and residential radon exposure in which investigators carried out both standard year-long air measurements and CR-39 alpha detector measurements (call surface monitors)

  2. Persuasion Via Mere Exposure

    ERIC Educational Resources Information Center

    Tucker, Raymond K.; Ware, Paul D.

    1971-01-01

    Describes an experiment which sought to effect persuasion by merely exposing subjects to the name of a stimulus object for a specified number of times. Through illustration, explains the theoretical basis and methodology employed in a mere exposure experiment. (Author)

  3. Paternal Exposures and Pregnancy

    MedlinePlus

    ... substances in the workplace including lead, organic solvents, pesticides and radiation. Some studies suggest that such exposures ... for birth defects. Men exposed to heavy metals, pesticides, and other chemicals in the workplace may carry ...

  4. Nanotechnology and Exposure Science

    PubMed Central

    LIOY, PAUL J.; NAZARENKO, YEVGEN; HAN, TAE WON; LIOY, MARY JEAN; MAINELIS, GEDIMINAS

    2014-01-01

    This article discusses the gaps in our understanding of human exposures to nanoparticles stemming from the use of nanotechnology-based consumer products by the general public. It also describes a series of steps that could be taken to characterize such exposures. The suggested steps include classification of the nanotechnology-based products, simulation of realistic exposure patterns, characterization of emissions, analysis of the duration of activities resulting in exposures, and consideration of the bioaccessibility of nanoparticles. In addition, we present a preliminary study with nanotechnology-based cosmetic powders where particle release was studied under realistic powder application conditions. The data demonstrated that when nanotechnology-based cosmetic powders were used, there was a potential for inhaling airborne particles ranging in size from tens of nanometers to tens of micrometers. PMID:21222382

  5. NATIONAL EXPOSURE REGISTRY (NER)

    EPA Science Inventory

    This system is a listing of persons (general population) with documented exposure to select hazardous substances (superfund related). All adverse health outcomes are monitored prospectively. Retrospective identification of adverse health outcomes (usually verified by medical reco...

  6. Pesticide-Exposure Matrix

    Cancer.gov

    The "Pesticide-exposure Matrix" was developed to help epidemiologists and other researchers identify the active ingredients to which people were likely exposed when their homes and gardens were treated for pests in past years.

  7. Poinsettia plant exposure

    MedlinePlus

    Christmas flower poisoning; Lobster plant poisoning; Painted leaf poisoning ... Leaves, stem, sap of the poinsettia plant ... Poinsettia plant exposure can affect many parts of the body. EYES (IF DIRECT CONTACT OCCURS) Burning Redness STOMACH AND ...

  8. Radiation Exposure and Pregnancy

    MedlinePlus

    ... Instruction concerning prenatal radiation exposure. Washington, DC: U.S. Nuclear Regulatory Commission; NUREG 8.13, Revision 3; June 1999. The Health Physics Society is a nonprofit scientific professional organization whose ...

  9. Radiation exposure and pregnancy.

    PubMed

    Labant, Amy; Silva, Christina

    2014-01-01

    Radiological exposure from nuclear power reactor accidents, transportation of nuclear waste accidents, industrial accidents, or terrorist activity may be a remote possibility, but it could happen. Nurses must be prepared to evaluate and treat pregnant women and infants who have been exposed to radiation, and to have an understanding of the health consequences of a nuclear or radiological incident. Pregnant women and infants are a special group of patients who need consideration when exposed to radiation. Initial care requires thorough assessment and decisions regarding immediate care needs. Ongoing care is based on type and extent of radiation exposure. With accurate, comprehensive information and education, nurses will be better prepared to help mitigate the effects of radiation exposure to pregnant women and infants following a radiological incident. Information about radiation, health effects of prenatal radiation exposure, assessment, patient care, and treatment of pregnant women and infants are presented. PMID:25333800

  10. Personal Chemical Exposure informatics

    EPA Science Inventory

    Chemical Exposure science is the study of human contact with chemicals (from manufacturing facilities, everyday products, waste) occurring in their environments and advances knowledge of the mechanisms and dynamics of events that cause or prevent adverse health outcomes. (adapted...

  11. Pregnancy and Radiation Exposure

    MedlinePlus

    ... had that might impact the development of their sperm or their eggs (ova) and their risk of ... your concerns with them. Radiation Exposure to the Sperm from Diagnostic X-Ray Studies There are no ...

  12. Late Pleistocene intraplate extension of the Central Anatolian Plateau, Turkey: Inferences from cosmogenic exposure dating of alluvial fan, landslide and moraine surfaces along the Ecemiş Fault Zone

    NASA Astrophysics Data System (ADS)

    Yildirim, Cengiz; Akif Sarikaya, Mehmet; Ciner, Attila

    2016-04-01

    Late Pleistocene activity of the Ecemiş Fault Zone is integrally tied to ongoing intraplate crustal deformation in the Central Anatolian Plateau. Here we document the vertical displacement, slip rate, extension rate, and geochronology of normal faults within a narrow strip along the main strand of the fault zone. The Kartal, Cevizlik and Lorut faults are normal faults that have evident surface expression within the strip. Terrestrial cosmogenic nuclide geochronology reveals that the Kartal Fault deformed a 104.2 ± 16.5 ka alluvial fan surface and the Cevizlik Fault deformed 21.9 ± 1.8 ka glacial moraine and talus fan surfaces. The Cevizlik Fault delimits mountain front of the Aladaglar and forms >1 km relief. Our topographic surveys indicate 13.1 ± 1.4 m surface breaking vertical displacements along Cevizlik Faults, respectively. Accordingly, we suggest a 0.60 ± 0.08 mm a-1 slip rate and 0.35 ± 0.05 mm a-1 extension rate for the last 21.9 ± 1.8 ka on the Cevizlik Fault. Taken together with other structural observations in the region, we believe that the Cevizlik, Kartal ve Lorut faults are an integral part of intraplate crustal deformation in Central Anatolia. They imply that intraplate structures such as the Ecemiş Fault Zone may change their mode through time; presently, the Ecemiş Fault Zone has been deformed predominantly by normal faults. The presence of steep preserved fault scarps along the Kartal, Cevizlik and Lorut faults point to surface breaking normal faulting away from the main strand and particularly signify that these structures need to be taken into account for regional seismic hazard assessments. This project is supported by The Scientific and Technological Research Council of Turkey (TUBITAK, Grant number: 112Y087).

  13. Late Pleistocene intraplate extension of the Central Anatolian Plateau, Turkey: Inferences from cosmogenic exposure dating of alluvial fan, landslide, and moraine surfaces along the Ecemiş Fault Zone

    NASA Astrophysics Data System (ADS)

    Yıldırım, Cengiz; Sarıkaya, M. Akif; ćiner, Attila

    2016-06-01

    Here we documented the vertical displacement, slip rate, extension rate, and geochronology of normal faults within a narrow strip along the main strand of the Ecemiş Fault Zone. The Kartal, Cevizlik, and Lorut Faults are normal faults that have evident surface expression within the strip. Terrestrial cosmogenic nuclide geochronology revealed that the Kartal Fault deformed the 104.2 ± 16.5 ka aged alluvial fan surface and the Cevizlik Fault deformed the 21.9 ± 1.8 ka old moraine and talus fan surfaces. Our topographic surveys indicated 120 ± 10 m and 13.1 ± 1.4 m surface-breaking vertical displacements along the Kartal and Cevizlik Faults, respectively. Accordingly, we suggest a 1.15 ± 0.21 mm a-1 slip rate and 0.66 ± 0.12 mm a-1 extension rate for the last 104.2 ± 16.5 ka on the Kartal Fault, and a 0.60 ± 0.08 mm a-1 slip rate and 0.35 ± 0.05 mm a-1 extension rate for the last 21.9 ± 1.8 ka on the Cevizlik Fault. We believe that these structures are an integral part of intraplate crustal deformation in the Central Anatolia. They imply that intraplate structures such as the Ecemiş Fault Zone may change their mode through time; presently, the Ecemiş Fault Zone has been deformed predominantly by normal faults. The presence of steep preserved fault scarps along the Kartal, Cevizlik, and Lorut Faults point to surface-breaking normal faulting away from the main strand and particularly signify that these structures need to be taken into account for regional seismic hazard assessments.

  14. The Diesel Exhaust in Miners Study: II. Exposure Monitoring Surveys and Development of Exposure Groups

    PubMed Central

    Coble, Joseph B.; Stewart, Patricia A.; Vermeulen, Roel; Yereb, Daniel; Stanevich, Rebecca; Blair, Aaron; Silverman, Debra T.; Attfield, Michael

    2010-01-01

    Air monitoring surveys were conducted between 1998 and 2001 at seven non-metal mining facilities to assess exposure to respirable elemental carbon (REC), a component of diesel exhaust (DE), for an epidemiologic study of miners exposed to DE. Personal exposure measurements were taken on workers in a cross-section of jobs located underground and on the surface. Air samples taken to measure REC were also analyzed for respirable organic carbon (ROC). Concurrent measurements to assess exposure to nitric oxide (NO) and nitrogen dioxide (NO2), two gaseous components of DE, were also taken. The REC measurements were used to develop quantitative estimates of average exposure levels by facility, department, and job title for the epidemiologic analysis. Each underground job was assigned to one of three sets of exposure groups from specific to general: (i) standardized job titles, (ii) groups of standardized job titles combined based on the percentage of time in the major underground areas, and (iii) larger groups based on similar area carbon monoxide (CO) air concentrations. Surface jobs were categorized based on their use of diesel equipment and proximity to DE. A total of 779 full-shift personal measurements were taken underground. The average REC exposure levels for underground jobs with five or more measurements ranged from 31 to 58 μg m−3 at the facility with the lowest average exposure levels and from 313 to 488 μg m−3 at the facility with the highest average exposure levels. The average REC exposure levels for surface workers ranged from 2 to 6 μg m−3 across the seven facilities. There was much less contrast in the ROC compared with REC exposure levels measured between surface and underground workers within each facility, as well as across the facilities. The average ROC levels underground ranged from 64 to 195 μg m−3, while on the surface, the average ROC levels ranged from 38 to 71 μg m−3 by facility, an ∼2- to 3-fold difference. The average NO and

  15. Autoimmunity and Asbestos Exposure

    PubMed Central

    Pfau, Jean C.; Serve, Kinta M.; Noonan, Curtis W.

    2014-01-01

    Despite a body of evidence supporting an association between asbestos exposure and autoantibodies indicative of systemic autoimmunity, such as antinuclear antibodies (ANA), a strong epidemiological link has never been made to specific autoimmune diseases. This is in contrast with another silicate dust, crystalline silica, for which there is considerable evidence linking exposure to diseases such as systemic lupus erythematosus, systemic sclerosis, and rheumatoid arthritis. Instead, the asbestos literature is heavily focused on cancer, including mesothelioma and pulmonary carcinoma. Possible contributing factors to the absence of a stronger epidemiological association between asbestos and autoimmune disease include (a) a lack of statistical power due to relatively small or diffuse exposure cohorts, (b) exposure misclassification, (c) latency of clinical disease, (d) mild or subclinical entities that remain undetected or masked by other pathologies, or (e) effects that are specific to certain fiber types, so that analyses on mixed exposures do not reach statistical significance. This review summarizes epidemiological, animal model, and in vitro data related to asbestos exposures and autoimmunity. These combined data help build toward a better understanding of the fiber-associated factors contributing to immune dysfunction that may raise the risk of autoimmunity and the possible contribution to asbestos-related pulmonary disease. PMID:24876951

  16. Household exposure models

    SciTech Connect

    McKone, T.E.

    1988-01-01

    Human exposure to volatile organic compounds (VOCs) in tap water is often assumed to be dominated by ingestion of drinking water. This paper addresses the relative importance of inhalation and dermal exposures in a typical household. A three-compartment model is used to simulate the 24-h concentration history of VOCs in the shower, bathroom, and remaining household volumes as a result of tap water use. Mass transfers from water to air are derived from measured data for radon and used to estimate mass-transfer properties for VOCs. The model is used to calculate a range of concentrations and human exposures in US dwellings. The estimated ratio of household- inhalation uptake to ingestion uptake is in the range of 1 to 6 for VOCs. We use a dermal absorption model to assess exposure across the skin boundary during baths and showers. The ratio of dermal exposure to ingestion exposure is in the range 0.6 to 1. 24 refs., 1 fig., 7 tabs.

  17. Indoor fungal exposure.

    PubMed

    Rogers, Christine A

    2003-08-01

    Fungi affect humans in complex ways and are capable of eliciting a number of disease responses, such as infectious, allergic, and irritant and toxic effects. Fungal exposure is unequivocally associated with exacerbations of asthma, although the role of fungi in causing the disease is yet to be determined. The association between home dampness and respiratory health effects is strong, and fungal exposure is suspected to be associated with this linkage. Fear of toxin exposures has generated debate over the possible toxic health effects of airborne fungi; however, several recent reviews discount the health impacts of mycotoxin through indoor exposures. Nevertheless, fungal contamination of indoor environments is undesirable. Knowledge of sources and characteristics of fungal spore release and dispersal are important for understanding the processes of exposure. Environmental monitoring for fungi and their disease agents are important aspects of exposure assessment, but few guidelines exist for interpreting their health impacts. Much work is needed in isolating, characterizing and standardizing fungal disease agents to properly assess the prevalence of fungal health effects. PMID:14524388

  18. Unoccupied surface states on GaP(111) surfaces

    NASA Astrophysics Data System (ADS)

    Hamza, Alex V.

    1993-06-01

    Unoccupied surface electronic states have been observed on GaP(111) surfaces by momentum- resolved inverse photoemission spectroscopy (IPES). On the GaP(111):P surface an unoccupied state is detected 1.2 eV above the Fermi level. This state is associated with Ga surface adatoms, since prolonged exposure to the incident electron beam removes this IPES feature and reduces the Ga/P ratio in Auger electron spectrum. Preferential photon absorption at 2.27 eV by this surface can be explained by promotion of an electron from the valence band maximum to the unoccupied surface state detected in this work.

  19. Surface magnetic properties and magnetoimpedance of Co-rich amorphous and nanocrystalline (Co1-xFex)89 Zr7B4 ribbons with oxide layer formed by long-term exposure to air

    NASA Astrophysics Data System (ADS)

    Eggers, Tatiana; Leary, Alex; McHenry, Michael; Skorvanek, Ivan; Srikanth, Hariharan; Phan, Manh-Huong

    The surface magnetic properties and magnetoimpedance (MI) of amorphous and nanocrystalline (Co1-xFex)89 Zr7B4 melt-spun ribbons with x = 0, 0.025, 0.05 & 0.1 was investigated. A 540°C heat treatment for 1 hour under a 2 T transverse field formed a large volume fraction of nanocrystalline phases in the ribbons, in addition to a well-defined transverse anisotropy indicated by x-ray diffraction and magneto-optical Kerr effect microscopy. After the heat treatment, the ribbon samples were exposed to open air for an extended period of time producing a visible oxide layer on the surfaces. High frequency magnetoimpedance measurements in the driving frequency range of 1-1000 MHz were made to characterize the potential impact of the surface oxide layer on the ac magnetization process. Unique field-dependent behavior of the real and imaginary components of the MI was found in nanocrystalline ribbons with higher Co content (x >= 0.05), showing multiple peaks above 50 MHz driving current.

  20. TRANSFER EFFICIENCIES OF PESTICIDES FROM HOUSEHOLD FLOORING SURFACES TO FOODS

    EPA Science Inventory

    The transfer of pesticides from household surfaces to foods was measured to determine if excess dietary exposure potentially occurs when children's foods contact contaminated surfaces prior to being. Three common household surfaces (ceramic tile, hardwood flooring, and carpet) w...

  1. Asbestos exposure in buildings

    SciTech Connect

    Gaensler, E.A. )

    1992-06-01

    Asbestos-related diseases are dose-related. Among these, asbestosis has occurred only with the heavy exposures of the past, is a disappearing disease, and is of no concern with the very small exposures from building occupancy. A possibly increased incidence of lung cancer has been included in risk analysis, but probably is also related to high exposure in that both epidemiologic and experimental data suggest a link between the process of alveolar inflammation and fibrogenesis and carcinogenesis. The major concern has been mesothelioma in that it has occurred with much lower household and neighborhood exposure. Additionally, anxiety concerning buildings with ACM has been heightened by finding of friable asbestos in about 20% of public buildings, discovery of environmental asbestos fibers and asbestos bodies in autopsies, and demonstration of a linear relationship between exposure and lung cancer risk in occupational groups, inviting extrapolation to a much lower dose. Legislative and regulatory mandates, promotional activities of abatement companies, adverse court decisions placing the onus of repairs on asbestos manufacturers, and a pandemic of mediagenic disease' all have contributed to panic among building owners, school boards, insurers, and others. In that there is neither clinical nor epidemiologic support for asbestos-related disease from building occupancy, risk estimates have been based on extrapolation from past experience with generally high-dose occupational exposure. However, only a few epidemiologic studies have contained quantitative estimates of exposure, and these have been measured in terms of all particles, with conversion to asbestos fibers uncertain and the fiber type and dimension largely unknown.

  2. The Transient Dermal Exposure II: Post-Exposure Absorption and Evaporation of Volatile Compounds

    PubMed Central

    FRASCH, H. FREDERICK; BUNGE, ANNETTE L.

    2016-01-01

    The transient dermal exposure is one where the skin is exposed to chemical for a finite duration, after which the chemical is removed and no residue remains on the skin’s surface. Chemical within the skin at the end of the exposure period can still enter the systemic circulation. If it has some volatility, a portion of it will evaporate from the surface before it has a chance to be absorbed by the body. The fate of this post-exposure “skin depot” is the focus of this theoretical study. Laplace domain solutions for concentration distribution, flux, and cumulative mass absorption and evaporation are presented, and time domain results are obtained through numerical inversion. The Final Value Theorem is applied to obtain the analytical solutions for the total fractional absorption by the body and evaporation from skin at infinite time following a transient exposure. The solutions depend on two dimensionless variables: χ, the ratio of evaporation rate to steady-state dermal permeation rate; and the ratio of exposure time to membrane lag time. Simple closed form algebraic equations are presented that closely approximate the complete analytical solutions. Applications of the theory to the dermal risk assessment of pharmaceutical, occupational, and environmental exposures are presented for four example chemicals. PMID:25611182

  3. Occupational exposure in MRI

    PubMed Central

    Mcrobbie, D W

    2012-01-01

    This article reviews occupational exposure in clinical MRI; it specifically considers units of exposure, basic physical interactions, health effects, guideline limits, dosimetry, results of exposure surveys, calculation of induced fields and the status of the European Physical Agents Directive. Electromagnetic field exposure in MRI from the static field B0, imaging gradients and radiofrequency transmission fields induces electric fields and currents in tissue, which are responsible for various acute sensory effects. The underlying theory and its application to the formulation of incident and induced field limits are presented. The recent International Commission on Non-Ionizing Radiation Protection (ICNIRP) Bundesministerium für Arbeit und Soziales and Institute of Electrical and Electronics Engineers limits for incident field exposure are interpreted in a manner applicable to MRI. Field measurements show that exposure from movement within the B0 fringe field can exceed ICNIRP reference levels within 0.5 m of the bore entrance. Rate of change of field dB/dt from the imaging gradients is unlikely to exceed the new limits, although incident field limits can be exceeded for radiofrequency (RF) exposure within 0.2–0.5 m of the bore entrance. Dosimetric surveys of routine clinical practice show that staff are exposed to peak values of 42±24% of B0, with time-averaged exposures of 5.2±2.8 mT for magnets in the range 0.6–4 T. Exposure to time-varying fields arising from movement within the B0 fringe resulted in peak dB/dt of approximately 2 T s−1. Modelling of induced electric fields from the imaging gradients shows that ICNIRP-induced field limits are unlikely to be exceeded in most situations; however, movement through the static field may still present a problem. The likely application of the limits is discussed with respect to the reformulation of the European Union (EU) directive and its possible implications for MRI. PMID:22457400

  4. Asbestos Exposure Assessment Database

    NASA Technical Reports Server (NTRS)

    Arcot, Divya K.

    2010-01-01

    Exposure to particular hazardous materials in a work environment is dangerous to the employees who work directly with or around the materials as well as those who come in contact with them indirectly. In order to maintain a national standard for safe working environments and protect worker health, the Occupational Safety and Health Administration (OSHA) has set forth numerous precautionary regulations. NASA has been proactive in adhering to these regulations by implementing standards which are often stricter than regulation limits and administering frequent health risk assessments. The primary objective of this project is to create the infrastructure for an Asbestos Exposure Assessment Database specific to NASA Johnson Space Center (JSC) which will compile all of the exposure assessment data into a well-organized, navigable format. The data includes Sample Types, Samples Durations, Crafts of those from whom samples were collected, Job Performance Requirements (JPR) numbers, Phased Contrast Microscopy (PCM) and Transmission Electron Microscopy (TEM) results and qualifiers, Personal Protective Equipment (PPE), and names of industrial hygienists who performed the monitoring. This database will allow NASA to provide OSHA with specific information demonstrating that JSC s work procedures are protective enough to minimize the risk of future disease from the exposures. The data has been collected by the NASA contractors Computer Sciences Corporation (CSC) and Wyle Laboratories. The personal exposure samples were collected from devices worn by laborers working at JSC and by building occupants located in asbestos-containing buildings.

  5. COLLECTION OF UNDISTURBED SURFACE SEDIMENTS

    EPA Science Inventory

    The National Resource Council identified the need for a capability to collect undisturbed surface sediments. Surface sediments are an important source for most exposure of fish to polychlorinated biphenyls via direct uptake from water in contact with sediments. An innovative sedi...

  6. Clementine auto exposure control software

    SciTech Connect

    Arnold, E.

    1994-11-15

    The primary mission of the Clementine program was to test technology developed under the auspices of BMDO (the Ballistic Missile Defense Organization). A secondary goal of the program was to provide astronomical data to the scientific and educational community. The mission plan developed to accomplish these goals included complete mapping of the lunar surface and a close fly-by of a near-Earth asteroid, 1620 Geographos. Exposure control for the Clementine mission was driven by mission phase requirements and sensor characteristics. Thus, there were a total of twelve algorithms developed for three primary mission phases and the four imaging sensors (two additional sensors operated as star trackers). The three mission phases in question were lunar mapping, distant observation of the asteroid for the purpose of tracking, and close-up viewing (as close as 100 Km) of Geographos. The four non-star tracker sensors consisted of an Ultra Violet/Visible (UV/Vis) camera, a High Resolution (HiRes) camera with a built-in LIDAR (Light Detection And Ranging) unit, a Near Infrared (NIR) camera, and a Long Wave InfraRed (LWIR) camera. Due to lack of test time and uncertainties about the imaging environment, numerous input parameters were provided in the algorithms to allow extensive tuning of the exposure control during the mission.

  7. [Effects of Piper longum L. on chills in Japanese young women: time-dependent changes in skin surface temperature and its recovery rate following the exposure to mild cold stress].

    PubMed

    Yamada, Noriko; Nishihara, Chie; Yoshimura, Hiroyuki; Yamaguchi, Yasunaga; Takagaki, Ryoji; Miyakoshi, Masazumi; Mizutani, Kenji

    2009-02-01

    Chills can lead to problems such as insomnia, mental fatigue, and unstable emotions. Increasing evidence shows that young women, as well as menopausal women, suffer from chills. The present study investigated the effect of Piper longum L. on chills in young women. Participants with (n = 16) and without (n = 16) chills were sampled randomly from female university students using reported discriminative criteria (Yamada et al, 2007). Each participant was randomly assigned to low- (15 mg) and high-dose (30 mg) P. longum groups. We determined the severity of complaints related to chills, physical parameters (body mass index, body fat ratio, and blood pressure), the peripheral circulation dynamics using a laser tissue blood flow-meter, and the skin surface temperature in the fingers using a thermograph. Mild cold stress was applied 10 min after taking a capsule containing P. longum or a dextrin placebo. Then, a thermograph was recorded every minute for 11 min. Piper longum significantly facilitated the recovery of skin surface temperature at either low or high dosages in participants with chills. In subjects without chills, neither high- nor low-dosage of P. longum had an effect. Our findings have important implications for the utility of P. longum in women with chills. PMID:19326811

  8. Exposure to atmospheric radon.

    PubMed Central

    Steck, D J; Field, R W; Lynch, C F

    1999-01-01

    We measured radon (222Rn) concentrations in Iowa and Minnesota and found that unusually high annual average radon concentrations occur outdoors in portions of central North America. In some areas, outdoor concentrations exceed the national average indoor radon concentration. The general spatial patterns of outdoor radon and indoor radon are similar to the spatial distribution of radon progeny in the soil. Outdoor radon exposure in this region can be a substantial fraction of an individual's total radon exposure and is highly variable across the population. Estimated lifetime effective dose equivalents for the women participants in a radon-related lung cancer study varied by a factor of two at the median dose, 8 mSv, and ranged up to 60 mSv (6 rem). Failure to include these doses can reduce the statistical power of epidemiologic studies that examine the lung cancer risk associated with residential radon exposure. Images Figure 1 Figure 2 Figure 3 Figure 4 PMID:9924007

  9. Americans' Average Radiation Exposure

    SciTech Connect

    NA

    2000-08-11

    We live with radiation every day. We receive radiation exposures from cosmic rays, from outer space, from radon gas, and from other naturally radioactive elements in the earth. This is called natural background radiation. It includes the radiation we get from plants, animals, and from our own bodies. We also are exposed to man-made sources of radiation, including medical and dental treatments, television sets and emission from coal-fired power plants. Generally, radiation exposures from man-made sources are only a fraction of those received from natural sources. One exception is high exposures used by doctors to treat cancer patients. Each year in the United States, the average dose to people from natural and man-made radiation sources is about 360 millirem. A millirem is an extremely tiny amount of energy absorbed by tissues in the body.

  10. Toxic inhalational exposures.

    PubMed

    Chen, Tze-Ming Benson; Malli, Harjoth; Maslove, David M; Wang, Helena; Kuschner, Ware G

    2013-01-01

    Respirable toxicants are a spectrum of irritant and nonirritant gases, vapors, fumes, and airborne particles that can be entrained into the body through the respiratory tract, resulting in exposures that cause pulmonary injury and/or systemic disease. Sources of respirable toxicants include structural fires, industrial accidents, domestic mishaps, and intentional releases of injurious agents on the battleground (warfare) or in civilian settings (acts of terrorism). Acute toxic inhalational exposures may result in respiratory failure, multisystem organ dysfunction, and death. Management of victims includes assessment and protection of the airway, monitoring and treatment of systemic toxicity, and delivery of exposure-specific and nonspecific therapies that improve outcomes. Treatments may include antidotes, hyperbaric oxygen, and other nonspecific life-supporting interventions. PMID:22232204

  11. INVESTIGATION OF TRANSFER OF FLUORESCENT TRACERS FROM SURFACES TO SKIN

    EPA Science Inventory

    Under the provisions of the Food Quality Protection Act (FQPA), aggregate exposure assessments must be conducted for pesticides proposed for registration. Many aspects of dermal exposure assessment remain poorly quantified. For purposes of assessing surface-to-skin transfers ...

  12. Exposure history of individual cosmic particles

    NASA Technical Reports Server (NTRS)

    Nishiizumi, K.; Arnold, J. R.; Fink, D.; Klein, J.; Middleton, R.

    1991-01-01

    Cosmogenic Be-10 and Al-26 were measured in a suite of stony cosmic spherules derived from deep-sea sediments and the Greenland ice cap. These spherules show clear evidence of exposure to galactic cosmic ray and solar cosmic ray bombardment on time scales from a few times 100,000 years up to as much as 10 to the 7th years. The exposure took place in the inner solar system, not in highly eccentric orbits. When they reached the earth, the particles were not much larger than their present size, but it is not excluded that most of their cosmic ray exposure took place very close to the surface of an asteroidal body.

  13. Air Pollution Exposure

    PubMed Central

    Balmes, John R.; Collard, Harold R.

    2015-01-01

    Air pollution exposure is a well-established risk factor for several adverse respiratory outcomes, including airways diseases and lung cancer. Few studies have investigated the relationship between air pollution and interstitial lung disease (ILD) despite many forms of ILD arising from environmental exposures. There are potential mechanisms by which air pollution could cause, exacerbate, or accelerate the progression of certain forms of ILD via pulmonary and systemic inflammation as well as oxidative stress. This article will review the current epidemiologic and translational data supporting the plausibility of this relationship and propose a new conceptual framework for characterizing novel environmental risk factors for these forms of lung disease. PMID:25846532

  14. Cosmic-Ray Exposure History of Enstatite Meteorites

    NASA Astrophysics Data System (ADS)

    Graf, Th.; Marti, K.

    1992-07-01

    Enstatite achondrites display long exposure ages (T(sub)e) compared to the collisional lifetimes of ordinary chondrites of ~17 Ma (Eberhardt et al., 1965; Graf and Marti, 1992), and therefore suggest special orbits for these meteorites. Recently, Gaffey et al. (1992) suggested a link between aubrites, near- Earth asteroid 3103 and E-type asteroids of the Hungaria family, based on spectral matches and orbital considerations. This would represent the first direct link of a meteorite type and an asteroid family. Moreover, the orbital elements of Apollo object 3103 are consistent with long collisional lifetimes as observed for the Norton County and Mayo Belwa aubrites (T(sub)e = 110-120 Ma). There has been much debate over the genetic relation between E-chondrites and aubrites (Keil, 1989). Crabb and Anders (1981) found that exposure ages show a pronounced trend E4 < E6 < aubrites. We reevaluate the cosmic ray record of enstatite meteorites based on an updated database (Schultz and Kruse, 1989) as well as improved production rates and shielding corrections. We make the following observations: 1) Five out of 11 aubrites cluster at T(sub)e = 55+-5 Ma. All three known solar gas-bearing aubrites belong to this group, lending considerable support to the reality of a discrete event at this time. 2) While Gaffey et al. (1992) suggested that a significant fraction of aubrites may derive from 1-2 meteorite streams, the average ^22Ne/21Ne ratios of ~1.11 and saturated ^26Al activities render a long 2-pi irradiation interval preceding the (short) 4- pi exposure in space unlikely. 3) In a ^38Ar/^21Ne vs ^22Ne/^21Ne diagram, the inferred spallation ratios of EH-chondrites plot systematically below the expected correlation line. However, Cl abundances in EHs are about an order of magnitude larger than those in ordinary chondrites. If significant amounts of ^36Ar produced by the reaction ^35Cl(n,gamma)^36Cl --> ^36Ar are present, the standard procedure overestimates trapped Ar

  15. Occupational exposure to bitumen during road paving.

    PubMed

    Heikkilä, Pirjo; Riala, Riitta; Hämeilä, Mervi; Nykyri, Erkki; Pfäffli, Pirkko

    2002-01-01

    The exposure of road pavers to total particulates, bitumen fumes, semivolatile organic compounds (SVOCs), polycyclic aromatic hydrocarbons (PAHs), low-molecular-weight amines, styrene, and 1,3-butadiene was studied at 13 paving sites where 11 different asphalt mixtures were laid. Researchers analyzed 1-hydroxypyrene in the workers' pre- and postshift urine samples. The arithmetic mean concentrations of total particulates, bitumen fumes, SVOCs, and PAHs in the breathing zone of road pavers were 0.6 mg/m3, 0.29 mg/m3, 5.6 mg/m3, and 5.03 microg/m3, respectively. The highest bitumen fume concentrations (2.65 mg/m3) were measured in manual mastic laying, that is, when the paving temperature was highest. More than 90% of air impurities measured were in the vapor phase. Workers laying surface dressing were exposed to the highest SVOC concentrations (27.8 mg/m3). The paving temperature and the concentrations of bitumen fume correlated positively, but the weather conditions significantly affected the workers' exposure; for example, increased wind velocity resulted in lower concentrations of SVOCs and PAHs. Job title was not found to be a significant determinant of exposure, but exposure to bitumen fume and greater than or equal to four-ring PAHs among manual mastic pavers, and that to SVOCs and total PAHs among surface dressing workers, were significantly higher than among other pavers. Exposure during road paving operations was, on average, more than 10-fold higher to PAHs than was the exposure of a traffic controller (0.34 microg/m3) caused by automobile exhausts from background traffic. The PAHs were comprised mainly of two- and three-ring compounds. The concentrations of amines, and impurities from polymer modified bitumens, styrene, and 1,3-butadiene were below detection limits. Urinary 1-hydroxypyrene concentrations were higher among road pavers than among office workers serving as referents. PMID:11975651

  16. Isoprene chemistry in pristine and polluted Amazon environments: Eulerian and Lagrangian model frameworks and the strong bearing they have on our understanding of surface ozone and predictions of rainforest exposure to this priority pollutant

    NASA Astrophysics Data System (ADS)

    Levine, J. G.; MacKenzie, A. R.; Squire, O. J.; Archibald, A. T.; Griffiths, P. T.; Abraham, N. L.; Pyle, J. A.; Oram, D. E.; Forster, G.; Brito, J. F.; Lee, J. D.; Hopkins, J. R.; Lewis, A. C.; Bauguitte, S. J. B.; Demarco, C. F.; Artaxo, P.; Messina, P.; Lathière, J.; Hauglustaine, D. A.; House, E.; Hewitt, C. N.; Nemitz, E.

    2015-09-01

    exposure metric of around 1000 ppbv h, compared to just 20 ppbv h with the Eulerian model. The model framework therefore has considerable bearing on our understanding of the frequency at which, and the duration for which, the rainforest is exposed to damaging ground-level ozone concentrations.

  17. OPTIMIZING EXPOSURE MEASUREMENT TECHNIQUES

    EPA Science Inventory

    The research repo