Science.gov

Sample records for 3d metal-organic framework

  1. A Metal Organic Framework with Spherical Protein Nodes: Rational Chemical Design of 3D Protein Crystals.

    PubMed

    Sontz, Pamela A; Bailey, Jake B; Ahn, Sunhyung; Tezcan, F Akif

    2015-09-16

    We describe here the construction of a three-dimensional, porous, crystalline framework formed by spherical protein nodes that assemble into a prescribed lattice arrangement through metal-organic linker-directed interactions. The octahedral iron storage enzyme, ferritin, was engineered in its C3 symmetric pores with tripodal Zn coordination sites. Dynamic light scattering and crystallographic studies established that this Zn-ferritin construct could robustly self-assemble into the desired bcc-type crystals upon coordination of a ditopic linker bearing hydroxamic acid functional groups. This system represents the first example of a ternary protein-metal-organic crystalline framework whose formation is fully dependent on each of its three components.

  2. 3D hybrid-porous carbon derived from carbonization of metal organic frameworks for high performance supercapacitors

    NASA Astrophysics Data System (ADS)

    Bao, Weizhai; Mondal, Anjon Kumar; Xu, Jing; Wang, Chengyin; Su, Dawei; Wang, Guoxiu

    2016-09-01

    We report a rational design and synthesis of 3D hybrid-porous carbon with a hierarchical pore architecture for high performance supercapacitors. It contains micropores (<2 nm diameter) and mesopores (2-4 nm), derived from carbonization of unique porous metal organic frameworks (MOFs). Owning to the synergistic effect of micropores and mesopores, the hybrid-porous carbon has exceptionally high ion-accessible surface area and low ion diffusion resistance, which is desired for supercapacitor applications. When applied as electrode materials in supercapacitors, 3D hybrid-porous carbon demonstrates a specific capacitance of 332 F g-1 at a constant charge/discharge current of 500 mA g-1. The supercapacitors can endure more than 10,000 cycles without degradation of capacitance.

  3. Positional isomerism-driven two 3D pillar-layered metal-organic frameworks: Syntheses, topological structures and photoluminescence properties

    SciTech Connect

    Sun, Yayong; Zhao, Siwei; Ma, Haoran; Han, Yi; Liu, Kang; Wang, Lei

    2016-06-15

    Two novel three-dimensional (3D) pillar-layered metal-organic frameworks (MOFs), namely [Zn{sub 2}(μ{sub 2}-OH)(boaba)(1,4-bmimb)]{sub n} (1) and {[Zn_5K_2(μ_2-H_2O)_2(boaba)_4(1,2-bmimb)_2(H_2O)_2]·H_2O}{sub n} (2), were prepared by hydrothermal reactions (H{sub 3}boaba=3,5-bis-oxyacetate-benzoic acid; 1,4-bmimb=1,4-bis((2-methyl-1H-imidazol-1-yl)methyl)benzene; 1,2-bmimb =1,2-bis((2-methyl-1H-imidazol-1-yl)methyl)benzene). Notably, 1 exhibits a (3,5)-connected binodal (6{sup 3})(6{sup 9}·8)-gra net with binuclear [Zn{sub 2}(μ{sub 2}-OH)(COO)]{sup 2+} clusters, while 2 shows a novel (4,4,5,9)-connected 4-nodal net constructed from the unique Zn(II)-K(I) heterometal rod-like substructures. The results indicate that the disposition of the 2-methylimidazolyl groups of bis(imidazole) ligands have a significant effect on structural diversity. Moreover, the photoluminescence properties of 1 and 2 have been investigated. - Graphical abstract: Two novel 3D pillar-layered metal-organic coordination networks with aromatic multicarboxylate anion and bis(imidazole) ligands have been synthesized and structurally characterized. Display Omitted - Highlights: • It is rarely reported that metal-organic frameworks prepared with 3,5-bis-oxyacetate-benzoic acid. • Two metal-organic frameworks based on positional isomeric ligands were synthesized and structurally characterized. • Compond 1 displays unique (3,5)-connected binodal gra topology. • Compound 2 exhibits (4,4,5,9)-connected 4-nodal topology based on the Zn(II)-K(I) heterometal rod-like substructures. • The photoluminescence properties of compound 1 and 2 have been investigated.

  4. 3D metal-organic framework as highly efficient biosensing platform for ultrasensitive and rapid detection of bisphenol A.

    PubMed

    Wang, Xue; Lu, Xianbo; Wu, Lidong; Chen, Jiping

    2015-03-15

    As is well known, bisphenol A (BPA), usually exists in daily plastic products, is one of the most important endocrine disrupting chemicals. In this work, copper-centered metal-organic framework (Cu-MOF) was synthesized, which was characterized by SEM, TEM, XRD, FTIR and electrochemical method. The resultant Cu-MOF was explored as a robust electrochemical biosensing platform by choosing tyrosinase (Tyr) as a model enzyme for ultrasensitive and rapid detection of BPA. The Cu-MOF provided a 3D structure with a large specific surface area, which was beneficial for enzyme and BPA absorption, and thus improved the sensitivity of the biosensor. Furthermore, Cu-MOF as a novel sorbent could increase the available BPA concentration to react with tyrosinase through π-π stacking interactions between BPA and Cu-MOF. The Tyr biosensor exhibited a high sensitivity of 0.2242A M(-1) for BPA, a wide linear range from 5.0×10(-8) to 3.0×10-6moll(-1), and a low detection limit of 13nmoll(-1). The response time for detection of BPA is less than 11s. The proposed method was successfully applied to rapid and selective detection of BPA in plastic products with satisfactory results. The recoveries are in the range of 94.0-101.6% for practical applications. With those remarkable advantages, MOFs-based 3D structures show great prospect as robust biosensing platform for ultrasensitive and rapid detection of BPA.

  5. Study of heterogeneous catalysis by iron-squarate based 3D metal organic framework for the transformation of tetrazines to oxadiazole derivatives.

    PubMed

    Goswami, Soumyabrata; Jena, Himanshu Sekhar; Konar, Sanjit

    2014-07-21

    We present here a simple, milder, and environmentally benign heterogeneous catalytic method for the transformation of tetrazines to oxadiazole derivatives at room temperature (25 °C) using our earlier synthesized iron-squarate based 3D metal organic framework, [Fe3(OH)3(C4O4)(C4O4)0.5]n (FeSq-MOF).

  6. A series of 3D metal organic frameworks based on [24-MC-6] metallacrown clusters: structure, magnetic and luminescence properties.

    PubMed

    Wang, Kai; Zou, Hua-Hong; Chen, Zi-Lu; Zhang, Zhong; Sun, Wei-Yin; Liang, Fu-Pei

    2014-09-14

    Four isostructural metal organic frameworks (MOFs), namely [Co6(HipO)6]·6H2O (1), [Mn6(HipO)6]·6H2O (2), [Cd6(HipO)6]·6H2O (3) and [Zn6(HipO)6]·7H2O (4) (H3ipO = 2-hydroxyisophthalic acid), were synthesized and structurally characterized. They have a 3D (4,6)-connected framework based on [24-MC-6] metallacrown clusters ([24-MC-6]-based MOFs). The arrangements of the 24-MC-6 metallacrown SBUs show a regular change indicated by the orientation of their symmetry axes, resulting in a special dense packing mode different from other [24-MC-6]-based MOFs. The analysis of SQUID measurements reveal that compound 1 displays the dominant antiferromagnetic exchanges in 300-10 K between the adjacent Co(II) ions and a ferromagnetic-like behavior at lower temperatures, whereas compound 2 shows an antiferromagnetic interaction between the adjacent Mn(II) ions. Compound 1 exhibits a magnetocaloric effect (MCE) with the resulting entropy change (-ΔS(m)) of 15.20 J kg(-1) K(-1) for ΔH = 50 kG at 6 K, which is the highest value among the cobalt-based MOFs with MCE reported so far. The luminescence properties of compounds 3 and 4 were studied, both of them exhibit photoluminescence in the solid state at room temperature which can be ascribed to intraligand π→π* transitions.

  7. Asymmetric Supercapacitors Using 3D Nanoporous Carbon and Cobalt Oxide Electrodes Synthesized from a Single Metal-Organic Framework.

    PubMed

    Salunkhe, Rahul R; Tang, Jing; Kamachi, Yuichiro; Nakato, Teruyuki; Kim, Jung Ho; Yamauchi, Yusuke

    2015-06-23

    Nanoporous carbon and nanoporous cobalt oxide (Co3O4) materials have been selectively prepared from a single metal-organic framework (MOF) (zeolitic imidazolate framework, ZIF-67) by optimizing the annealing conditions. The resulting ZIF-derived carbon possesses highly graphitic walls and a high specific surface area of 350 m(2)·g(-1), while the resulting ZIF-derived nanoporous Co3O4 possesses a high specific surface area of 148 m(2)·g(-1) with much less carbon content (1.7 at%). When nanoporous carbon and nanoporous Co3O4 were tested as electrode materials for supercapacitor application, they showed high capacitance values (272 and 504 F·g(-1), respectively, at a scan rate of 5 mV·s(-1)). To further demonstrate the advantages of our ZIF-derived nanoporous materials, symmetric (SSCs) and asymmetric supercapacitors (ASCs) were also fabricated using nanoporous carbon and nanoporous Co3O4 electrodes. Improved capacitance performance was successfully realized for the ASC (Co3O4//carbon), better than those of the SSCs based on nanoporous carbon and nanoporous Co3O4 materials (i.e., carbon//carbon and Co3O4//Co3O4). The developed ASC with an optimal mass loading can be operated within a wide potential window of 0.0-1.6 V, which leads to a high specific energy of 36 W·h·kg(-1). More interestingly, this ASC also exhibits excellent rate capability (with the highest specific power of 8000 W·kg(-1) at a specific energy of 15 W·h·kg(-1)) combined with long-term stability up to 2000 cycles.

  8. Unusual Transformation from a Solvent-Stabilized 1D Coordination Polymer to a Metal-Organic Framework (MOF)-Like Cross-Linked 3D Coordination Polymer.

    PubMed

    Lee, Seung-Chul; Choi, Eun-Young; Lee, Sang-Beom; Kim, Sang-Wook; Kwon, O-Pil

    2015-10-26

    An unusual 1D-to-3D transformation of a coordination polymer based on organic linkers containing highly polar push-pull π-conjugated side chains is reported. The coordination polymers are synthesized from zinc nitrate and an organic linker, namely, 2,5-bis{4-[1-(4-nitrophenyl)pyrrolidin-2-yl]butoxy}terephthalic acid, which possesses highly polar (4-nitrophenyl)pyrrolidine groups, with high dipole moments of about 7 D. The coordination polymers exhibit an unusual transformation from a soluble, solvent-stabilized 1D coordination polymer into an insoluble, metal-organic framework (MOF)-like 3D coordination polymer. The coordination polymer exhibits good film-forming ability, and the MOF-like films are insoluble in conventional organic solvents.

  9. In situ synthesized 3D heterometallic metal-organic framework (MOF) as a high-energy-density material shows high heat of detonation, good thermostability and insensitivity.

    PubMed

    Feng, Yaya; Liu, Xiangyu; Duan, Linqiang; Yang, Qi; Wei, Qing; Xie, Gang; Chen, Sanping; Yang, Xuwu; Gao, Shengli

    2015-02-07

    A reticular 3D heterometallic metal-organic framework (MOF), [Cu4Na(Mtta)5(CH3CN)]n () (N% = 40.08%), has been synthesized, using a 5-methyl tetrazole (Mtta) ligand formed from acetonitrile and azide, through in situ synthesis and structurally characterized by X-ray single crystal diffraction. The fluorescence spectra demonstrate that undergoes an interesting structural transformation in aqueous solution, yielding the compound [Cu4Na(Mtta)5H2O]n () as confirmed by (1)H NMR, IR and PXRD. Thermoanalysis showed that possesses excellent thermostability up to 335 °C. The calculated detonation properties and the sensitivity test illustrate that compound could be used as a potential explosive. In addition, the non-isothermal kinetics for were studied using the Kissinger and Ozawa-Doyle methods. The enthalpy of formation was obtained from the determination of the constant-volume combustion energy.

  10. Electrospun carbon nanofibers reinforced 3D porous carbon polyhedra network derived from metal-organic frameworks for capacitive deionization

    PubMed Central

    Liu, Yong; Ma, Jiaqi; Lu, Ting; Pan, Likun

    2016-01-01

    Carbon nanofibers reinforced 3D porous carbon polyhedra network (e-CNF-PCP) was prepared through electrospinning and subsequent thermal treatment. The morphology, structure and electrochemical performance of the e-CNF-PCP were characterized using scanning electron microscopy, Raman spectra, nitrogen adsorption-desorption, cyclic voltammetry and electrochemical impedance spectroscopy, and their electrosorption performance in NaCl solution was studied. The results show that the e-CNF-PCP exhibits a high electrosorption capacity of 16.98 mg g−1 at 1.2 V in 500 mg l−1 NaCl solution, which shows great improvement compared with those of electrospun carbon nanofibers and porous carbon polyhedra. The e-CNF-PCP should be a very promising candidate as electrode material for CDI applications. PMID:27608826

  11. A 3D chiral metal-organic framework based on left-handed helices containing 3-amino-1 H-1,2,4-triazole ligand

    SciTech Connect

    Liu, Bing; Yang, Tian-Yi; Feng, Hui-Jun; Zhang, Zong-Hui; Xu, Ling

    2015-10-15

    A chiral metal-organic framework, [Cu(atr)(OH)]·0.5H{sub 2}O·0.5en (1) (Hatr=3-amino-1 H-1,2,4-triazole, en=ethylenediamine), was constructed via diffusion reaction of the achiral Hatr ligand and CuSO{sub 4} as starting materials. Compound 1 crystallizes in the chiral space group P3{sub 2}21 and features a porous metal-organic framework with 44.1% solvent-accessible volume fabricated by left-handed helices with a pitch height of l{sub p}=10.442 Å. Six helices gather around in a cycle forming a large honeycomb channel with a 6.58 Å inner diameter. Cu(II) center and atr{sup ‒} ligand regarded as 3-connected nodes, compound 1 can be simplified to a 3-c uninodal (4.12{sup 2}) (qtz-h) topological network. A gradual decreasing in the magnetic moment depending on temperature decreasing indicates an antiferromagnetic interaction in 1. The powder XRD confirms the bulk sample is a single crystal pure phase, and the thermogravimetric analysis shows the thermal stability of 1 is up to ca. 240 °C. - Highlights: • The present 3D chiral MOF is built from achiral Hatr ligand. • Six left-handed helices gather into a honeycomb channel in chiral sp P3{sub 2}21. • Compound 1 shows a 3-c uninodal (4.12{sup 2}) or qtz-h topological network. • Compound 1 indicates an antiferromagnetic interaction.

  12. Metallated metal-organic frameworks

    DOEpatents

    Bury, Wojciech; Farha, Omar K.; Hupp, Joseph T.; Mondloch, Joseph E.

    2017-02-07

    Porous metal-organic frameworks (MOFs) and metallated porous MOFs are provided. Also provided are methods of metallating porous MOFs using atomic layer deposition and methods of using the metallated MOFs as catalysts and in remediation applications.

  13. 3D origami electrochemical device for sensitive Pb(2+) testing based on DNA functionalized iron-porphyrinic metal-organic framework.

    PubMed

    Wang, Xiu; Yang, Chunlei; Zhu, Shaojun; Yan, Mei; Ge, Shenguang; Yu, Jinghua

    2017-01-15

    A highly sensitive electrochemical (EC) biosensor combined with a 3D origami device for detection of Pb(2+)was developed based on novel Au nanoparticles modified paper working electrode (Au-PWE) as sensor platform and DNA functionalized iron-porphyrinic metal-organic framework ((Fe-P)n-MOF-Au-GR) hybrids as signal probes. In the presence of Pb(2+), GR could be specifically cleaved at the ribonucleotide (rA) site, which produced the short (Fe-P)n-MOF-linked oligonucleotide fragment to hybridize with hairpin DNA immobilized on the surface of Au-PWE. Because of the mimic peroxidase property of (Fe-P)n-MOF, enzymatically amplified electrochemical signal was obtained to offer the sensitive detection of Pb(2+). In addition, benefiting from the Pb(2+) dependent GR, the proposed assay could selectively detect Pb(2+) in the presence of other metal ions. This method showed a good linear relationship between the current response and the Pb(2+) concentration ranging from 0.03 to 1000nmolL(-1) with a detection limit of 0.02nmolL(-1). The Au-PWE based electrochemical sensor along with the (Fe-P)n-MOF-Au-GR probe exhibited the advantages of low-cost, simple fabrication, high sensitivity and selectivity, providing potential application of real-time Pb(2+) detection both in environmental and biological samples.

  14. 3d-4f Metal-Organic Framework with Dual Luminescent Centers That Efficiently Discriminates the Isomer and Homologues of Small Organic Molecules.

    PubMed

    Zeng, Guang; Xing, Shanghua; Wang, Xiuru; Yang, Yulin; Ma, Dingxuan; Liang, Hongwei; Gao, Lu; Hua, Jia; Li, Guanghua; Shi, Zhan; Feng, Shouhua

    2016-02-01

    A 3d-4f luminescent metal-organic framework (MOF), [Tb2(Cu8I8)(C12H8NO2)6(H2O)4]·5C4H8O2 (4), and three analogues {[La2(Cu8I8)(C12H8NO2)6(C4H8O2)2(H2O)2]·3C4H8O2·2H2O (1), [Ce2(Cu8I8)(C12H8NO2)6(H2O)4]·5C4H8O2 (2), and [Eu2(Cu8I8)(C12H8NO2)6(H2O)4]·5C4H8O2 (3)}, were self-assembled from copper(I) halide clusters and lanthanide metal ions with an organic linker [3-(pyridin-4-yl)benzoic acid] under solvothermal conditions. Compound 4 with high quantum yield (Φ = 68%) exhibits reversible luminescence behavior, accompanying the removal and recovery of guest molecules (1,4-dioxane). Because of the unique porous structure and dual luminescent centers of compound 4, it can efficiently differentiate benzene series with different sizes and provide readouts in corresponding optical signals. Furthermore, it also can unambiguously discriminate the isomers, homologues, and other small molecules with similar structural motifs from one another. The luminescent color of the MOF sensor in different guest solvents has obvious changes that can be clearly distinguished by the naked eye. This multicolor luminescence originates from emissions of the dual luminescent centers, and the emissions have shifted, enhanced, weakened, or quenched to different degrees.

  15. "Clickable" metal-organic framework.

    PubMed

    Goto, Yuta; Sato, Hiroki; Shinkai, Seiji; Sada, Kazuki

    2008-11-05

    We demonstrated the metal-organic framework bearing the azide group in the organic linkers and in situ click reactions with some small alkynes. The XRPD patterns indicated that the click reaction proceeded without any decomposition of the original MOF network. Controlling the organic linkers and incorporation of the azide groups should provide the designer-made MOFs that have controlled molecular cavities with the desired steric dimensions and functionality.

  16. A two-fold interpenetrating 3D metal-organic framework material constructed from helical chains linked via 4,4'-H{sub 2}bpz fragments

    SciTech Connect

    Xie Yiming; Zhao Zhenguo; Wu Xiaoyuan; Zhang Qisheng; Chen Lijuan; Wang Fei; Chen Shanci; Lu Canzhong

    2008-12-15

    A 3-connected dia-f-type metal-organic framework compound {l_brace}[Ag(L){sub 3/2}H{sub 2}PO{sub 4}]{r_brace}{sub n} (1) has been synthesized by self-assembly of 4,4'-H{sub 2}bpz (L=4,4'-H{sub 2}bpz=3,3',5,5'-tetramethyl-4,4'-bipyrazole) and Ag{sub 4}P{sub 2}O{sub 7} under hydrothermal conditions. It crystallizes in the tetragonal space group I4{sub 1}/acd with a=21.406(4) A, b=21.406(4) A, c=36.298(8) A, Z=32. X-ray single-crystal diffraction reveals that 1 has a three-dimensional framework with an unprecedented alternate left- and right-handed helices structure, featuring a non-uniform two-fold interpenetrated (4.14{sup 2}) net. Photoluminescent investigation reveals that the title compound displays interesting emissions in a wide region, which shows that the title compound may be a good potential candidate as a photoelectric material. - Graphical abstract: A 3-connected dia-f-type metal-organic framework compound [Ag(4,4'-bpz){sub 3/2}H{sub 2}PO{sub 4}] shows unprecedented alternating left- and right-handed helices structure, featuring a non-uniform two-fold interpenetrated (4.14{sup 2}) net.

  17. Multiaxis sensing using metal organic frameworks

    DOEpatents

    Talin, Albert Alec; Allendorf, Mark D.; Leonard, Francois; Stavila, Vitalie

    2017-01-17

    A sensor device including a sensor substrate; and a thin film comprising a porous metal organic framework (MOF) on the substrate that presents more than one transduction mechanism when exposed to an analyte. A method including exposing a porous metal organic framework (MOF) on a substrate to an analyte; and identifying more than one transduction mechanism in response to the exposure to the analyte.

  18. Gas adsorption on metal-organic frameworks

    DOEpatents

    Willis, Richard R [Cary, IL; Low, John J. , Faheem, Syed A.; Benin, Annabelle I [Oak Forest, IL; Snurr, Randall Q [Evanston, IL; Yazaydin, Ahmet Ozgur [Evanston, IL

    2012-07-24

    The present invention involves the use of certain metal organic frameworks that have been treated with water or another metal titrant in the storage of carbon dioxide. The capacity of these frameworks is significantly increased through this treatment.

  19. A new 3D metal-organic framework (MOF) Zn(DNBPDC)2(BPY) with a dinuclear zinc (II) clusters as SBU

    NASA Astrophysics Data System (ADS)

    Li, Song; Qin, Xiangdong; Deng, Linxin; Liu, Hui

    2017-04-01

    A new 3D framework compound 1 Zn(DNBPDC)2(BPY) (DBDBC =2,2‧-dinitro-[1,1‧-biphenyl]-4,4‧-dicarboxylic acid, BPY = 4,4‧-Bipyridine) with a dinuclear zinc (II) clusters as SBU have been synthesized and structurally characterized. This compound crystallizes in Tetragonal, space group I41/acd, with a = 21.2959(10)Å, b = 21.2959(10) Å, c = 27.969(3) Å, α = 90.00°, β = 90.00 (10)°, γ = 90.00°, V =12684.4(16) Å3, Z = 16, Dc = 1.424 mg/cm3, μ = 0.806 mm-1, F(000) = 3792. From the thermogravimetric analysis, the compound can be stabilized up to 380 °C and the skeleton collapsed occurred in about 350-550 °C. The luminescence property test shows that the compound exhibit strong emission at 485 nm. The nitrogen adsorption capacity was 10 cc/g when the compound was activated under the temperature of 77 K and reach to atmospheric pressure.

  20. Spin-crossover behavior in cyanide-bridged iron(II)-copper(I) bimetallic 1-3D metal-organic frameworks.

    PubMed

    Agustí, Gloria; Muñoz, M Carmen; Gaspar, Ana B; Real, José A

    2009-04-20

    The synthesis and characterization of a series of 1-3D cyanide-bridged iron(II)-copper(I) bimetallic coordination polymers formulated as {Fe(3-Xpy)(2)[Cu(3-Xpy)(z)(CN)(2)](2)}, where 3-Xpy is a 3-halogenpyridine ligand with X = F (z = 1.5, 1), Cl (z = 1, 2 and 3), Br (z = 1, 4), and I (z = 1, 5), are reported. In all derivatives, the Fe(II) ion lies in pseudoctahedral [FeN(6)] sites defined by four in situ formed [Cu(3-Xpy)(z)(CN)(2)](-) bridging ligands and two 3-Xpy terminal ligands occupying the equatorial and axial positions, respectively. 1 consists of stacks of corrugated grids whose square windows are defined by pseudotrigonal and pseudotetrahedral [Cu(3-Fpy)(CN)(2)](-) and [Cu(3-Fpy)(2)(CN)(2)](-) units, respectively. 2 is a 3D coordination polymer with the topology of the open-framework CdSO(4). The [Cu(3-Clpy)(CN)(2)](-) rods connecting the pseudooctahedral Fe(II) sites are arranged in such a way that interpenetration is avoided. 3, an architectural isomer of 2, is defined by arrays of linear chains. 4 and 5 are isostructural to 3. Polymer 1 is essentially a low-spin (LS) compound with ca. 19% of residual Fe(II) ions in the high-spin (HS) state at 293 K. It undergoes an irreversible spin transition at T(c) = 356 K. Subsequent cooling-warming cycles give a new spin-crossover behavior characterized by T(c) = 187 K. The structural analysis at 130 and 293 K and at 293 K after irreversible transformation (293 K*) reveals a large unit cell volume variation of 67 A(3) per Fe atom. In addition to the volume change associated with the spin-state conversion, remarkable bond and angle modifications around the Cu(I) sites account for the high flexible nature of the crystal. 2 displays a complete not well-resolved two-step spin conversion, T(c1) = 169 K and T(c2) = 210 K, reflecting the occurrence of two distinct crystallographically Fe(II) sites. The large unit cell volume variation per Fe atom in 2, 59 A(3), has been rationalized in terms similar to those for 1. 1D

  1. Methane storage in metal-organic frameworks.

    PubMed

    He, Yabing; Zhou, Wei; Qian, Guodong; Chen, Banglin

    2014-08-21

    Natural gas (NG), whose main component is methane, is an attractive fuel for vehicular applications. Realization of safe, cheap and convenient means and materials for high-capacity methane storage can significantly facilitate the implementation of natural gas fuelled vehicles. The physisorption based process involving porous materials offers an efficient storage methodology and the emerging porous metal-organic frameworks have been explored as potential candidates because of their extraordinarily high porosities, tunable pore/cage sizes and easily immobilized functional sites. In this view, we provide an overview of the current status of metal-organic frameworks for methane storage.

  2. Minerals with metal-organic framework structures.

    PubMed

    Huskić, Igor; Pekov, Igor V; Krivovichev, Sergey V; Friščić, Tomislav

    2016-08-01

    Metal-organic frameworks (MOFs) are an increasingly important family of advanced materials based on open, nanometer-scale metal-organic architectures, whose design and synthesis are based on the directed assembly of carefully designed subunits. We now demonstrate an unexpected link between mineralogy and MOF chemistry by discovering that the rare organic minerals stepanovite and zhemchuzhnikovite exhibit structures found in well-established magnetic and proton-conducting metal oxalate MOFs. Structures of stepanovite and zhemchuzhnikovite, exhibiting almost nanometer-wide and guest-filled apertures and channels, respectively, change the perspective of MOFs as exclusively artificial materials and represent, so far, unique examples of open framework architectures in organic minerals.

  3. Superhydrophobic perfluorinated metal-organic frameworks.

    PubMed

    Chen, Teng-Hao; Popov, Ilya; Zenasni, Oussama; Daugulis, Olafs; Miljanić, Ognjen Š

    2013-08-07

    Three perfluorinated Cu-based metal-organic frameworks (MOFs) were prepared starting from extensively fluorinated biphenyl-based ligands accessed via C-H functionalization. These new materials are highly hydrophobic: with water contact angles of up to 151 ± 1°, they are among the most water-repellent MOFs ever reported.

  4. Porosity in metal-organic framework glasses.

    PubMed

    Thornton, A W; Jelfs, K E; Konstas, K; Doherty, C M; Hill, A J; Cheetham, A K; Bennett, T D

    2016-03-07

    The porosity of a glass formed by melt-quenching a metal-organic framework, has been characterized by positron annihilation lifetime spectroscopy. The results reveal porosity intermediate between the related open and dense crystalline frameworks ZIF-4 and ZIF-zni. A structural model for the glass was constructed using an amorphous polymerization algorithm, providing additional insight into the gas-inaccessible nature of porosity and the possible applications of hybrid glasses.

  5. Minerals with metal-organic framework structures

    PubMed Central

    Huskić, Igor; Pekov, Igor V.; Krivovichev, Sergey V.; Friščić, Tomislav

    2016-01-01

    Metal-organic frameworks (MOFs) are an increasingly important family of advanced materials based on open, nanometer-scale metal-organic architectures, whose design and synthesis are based on the directed assembly of carefully designed subunits. We now demonstrate an unexpected link between mineralogy and MOF chemistry by discovering that the rare organic minerals stepanovite and zhemchuzhnikovite exhibit structures found in well-established magnetic and proton-conducting metal oxalate MOFs. Structures of stepanovite and zhemchuzhnikovite, exhibiting almost nanometer-wide and guest-filled apertures and channels, respectively, change the perspective of MOFs as exclusively artificial materials and represent, so far, unique examples of open framework architectures in organic minerals. PMID:27532051

  6. Purification of metal-organic framework materials

    SciTech Connect

    Farha, Omar K.; Hupp, Joseph T.

    2012-12-04

    A method of purification of a solid mixture of a metal-organic framework (MOF) material and an unwanted second material by disposing the solid mixture in a liquid separation medium having a density that lies between those of the wanted MOF material and the unwanted material, whereby the solid mixture separates by density differences into a fraction of wanted MOF material and another fraction of unwanted material.

  7. Purification of metal-organic framework materials

    DOEpatents

    Farha, Omar K.; Hupp, Joseph T.

    2015-06-30

    A method of purification of a solid mixture of a metal-organic framework (MOF) material and an unwanted second material by disposing the solid mixture in a liquid separation medium having a density that lies between those of the wanted MOF material and the unwanted material, whereby the solid mixture separates by density differences into a fraction of wanted MOF material and another fraction of unwanted material.

  8. Photochemistry in a 3D metal-organic framework (MOF): monitoring intermediates and reactivity of the fac-to-mer photoisomerization of Re(diimine)(CO)3Cl incorporated in a MOF.

    PubMed

    Easun, Timothy L; Jia, Junhua; Calladine, James A; Blackmore, Danielle L; Stapleton, Christopher S; Vuong, Khuong Q; Champness, Neil R; George, Michael W

    2014-03-03

    The mechanism and intermediates in the UV-light-initiated ligand rearrangement of fac-Re(diimine)(CO)3Cl to form the mer isomer, when incorporated into a 3D metal-organic framework (MOF), have been investigated. The structure hosting the rhenium diimine complex is a 3D network with the formula {Mn(DMF)2[LRe(CO)3Cl]}∞ (ReMn; DMF = N,N-dimethylformamide), where the diimine ligand L, 2,2'-bipyridine-5,5'-dicarboxylate, acts as a strut of the MOF. The incorporation of ReMn into a KBr disk allows spatial distribution of the mer-isomer photoproduct in the disk to be mapped and spectroscopically characterized by both Fourier transform infrared and Raman microscopy. Photoisomerization has been monitored by IR spectroscopy and proceeds via dissociation of a CO to form more than one dicarbonyl intermediate. The dicarbonyl species are stable in the solid state at 200 K. The photodissociated CO ligand appears to be trapped within the crystal lattice and, upon warming above 200 K, readily recombines with the dicarbonyl intermediates to form both the fac-Re(diimine)(CO)3Cl starting material and the mer-Re(diimine)(CO)3Cl photoproduct. Experiments over a range of temperatures (265-285 K) allow estimates of the activation enthalpy of recombination for each process of ca. 16 (±6) kJ mol(-1) (mer formation) and 23 (±4) kJ mol(-1) (fac formation) within the MOF. We have compared the photochemistry of the ReMn MOF with a related alkane-soluble Re(dnb)(CO)3Cl complex (dnb = 4,4'-dinonyl-2,2'-bipyridine). Time-resolved IR measurements clearly show that, in an alkane solution, the photoinduced dicarbonyl species again recombines with CO to both re-form the fac-isomer starting material and form the mer-isomer photoproduct. Density functional theory calculations of the possible dicarbonyl species aids the assignment of the experimental data in that the ν(CO) IR bands of the CO loss intermediate are, as expected, shifted to lower energy when the metal is bound to DMF rather than to an

  9. Synergetic effect of host-guest chemistry and spin crossover in 3D Hofmann-like metal-organic frameworks [Fe(bpac)M(CN)4] (M=Pt, Pd, Ni).

    PubMed

    Bartual-Murgui, Carlos; Salmon, Lionel; Akou, Amal; Ortega-Villar, Norma A; Shepherd, Helena J; Muñoz, M Carmen; Molnár, Gábor; Real, José Antonio; Bousseksou, Azzedine

    2012-01-09

    The synthesis and characterization of a series of three-dimensional (3D) Hofmann-like clathrate porous metal-organic framework (MOF) materials [Fe(bpac)M(CN)(4)] (M=Pt, Pd, and Ni; bpac=bis(4-pyridyl)acetylene) that exhibit spin-crossover behavior is reported. The rigid bpac ligand is longer than the previously used azopyridine and pyrazine and has been selected with the aim to improve both the spin-crossover properties and the porosity of the corresponding porous coordination polymers (PCPs). The 3D network is composed of successive {Fe[M(CN)(4)]}(n) planar layers bridged by the bis-monodentate bpac ligand linked in the apical positions of the iron center. The large void between the layers, which represents 41.7% of the unit cell, can accommodate solvent molecules or free bpac ligand. Different synthetic strategies were used to obtain a range of spin-crossover behaviors with hysteresis loops around room temperature; the samples were characterized by magnetic susceptibility, calorimetric, Mössbauer, and Raman measurements. The complete physical study reveals a clear relationship between the quantity of included bpac molecules and the completeness of the spin transition, thereby underlining the key role of the π-π stacking interactions operating between the host and guest bpac molecules within the network. Although the inclusion of the bpac molecules tends to increase the amount of active iron centers, no variation of the transition temperature was measured. We have also investigated the ability of the network to accommodate the inclusion of molecules other than water and bpac and studied the synergy between the host-guest interaction and the spin-crossover behavior. In fact, the clathration of various aromatic molecules revealed specific modifications of the transition temperature. Finally, the transition temperature and the completeness of the transition are related to the nature of the metal associated with the iron center (Ni, Pt, or Pd) and also to the

  10. Hydrogen storage in metal-organic frameworks.

    PubMed

    Hu, Yun Hang; Zhang, Lei

    2010-05-25

    Metal-organic frameworks (MOFs) are highly attractive materials because of their ultra-high surface areas, simple preparation approaches, designable structures, and potential applications. In the past several years, MOFs have attracted worldwide attention in the area of hydrogen energy, particularly for hydrogen storage. In this review, the recent progress of hydrogen storage in MOFs is presented. The relationships between hydrogen capacities and structures of MOFs are evaluated, with emphasis on the roles of surface area and pore size. The interaction mechanism between H(2) and MOFs is discussed. The challenges to obtain a high hydrogen capacity at ambient temperature are explored.

  11. Metal-organic frameworks in chromatography.

    PubMed

    Yusuf, Kareem; Aqel, Ahmad; ALOthman, Zeid

    2014-06-27

    Metal-organic frameworks (MOFs) emerged approximately two decades ago and are the youngest class of porous materials. Despite their short existence, MOFs are finding applications in a variety of fields because of their outstanding chemical and physical properties. This review article focuses on the applications of MOFs in chromatography, including high-performance liquid chromatography (HPLC), gas chromatography (GC), and other chromatographic techniques. The use of MOFs in chromatography has already had a significant impact; however, the utilisation of MOFs in chromatography is still less common than other applications, and the number of MOF materials explored in chromatography applications is limited.

  12. Mechanical Alloying of Metal-Organic Frameworks.

    PubMed

    Panda, Tamas; Horike, Satoshi; Hagi, Keisuke; Ogiwara, Naoki; Kadota, Kentaro; Itakura, Tomoya; Tsujimoto, Masahiko; Kitagawa, Susumu

    2017-02-20

    The solvent-free mechanical milling process for two distinct metal-organic framework (MOF) crystals induced the formation of a solid solution, which is not feasible by conventional solution-based syntheses. X-ray and STEM-EDX studies revealed that performing mechanical milling under an Ar atmosphere promotes the high diffusivity of each metal ion in an amorphous solid matrix; the amorphous state turns into the porous crystalline structure by vapor exposure treatment to form a new phase of a MOF solid solution.

  13. Proton-Conducting Metal-Organic Frameworks

    NASA Astrophysics Data System (ADS)

    Ford, Jamie; Simmons, Jason; Yildirim, Taner

    2010-03-01

    Vehicles powered by polymer electrolyte membrane (PEM) fuel cells are an exciting alternative to current fossil fuel technology. The membranes in these cells serve as both charge transporter, ferrying protons from the anode to the cathode, and gas diffusion barrier, preventing the backflow of oxygen to the anode. Currently, hydrated sulfonated polymers are the preferred material for these membranes. The presence of water, however, limits the operating temperature to 100 C, reducing the electrode kinetics and CO tolerance of the entire system. In an effort to increase the efficiency and operating temperature of these fuel cells, we are investigating the proton conductivity of new host/guest materials based on metal-organic frameworks (MOFs) loaded with imidazole. These thermally stable frameworks provide well-defined pores that accommodate imidazole networks and form proton-conducting pathways. Here, we will present the structure and proton dynamics of these materials as elucidated by elastic and inelastic neutron scattering measurements.

  14. Cascade reactions catalyzed by metal organic frameworks.

    PubMed

    Dhakshinamoorthy, Amarajothi; Garcia, Hermenegildo

    2014-09-01

    Cascade or tandem reactions where two or more individual reactions are carried out in one pot constitute a clear example of process intensification, targeting the maximization of spatial and temporal productivity with mobilization of minimum resources. In the case of catalytic reactions, cascade processes require bi-/multifunctional catalysts that contain different classes of active sites. Herein, we show that the features and properties of metal-organic frameworks (MOFs) make these solids very appropriate materials for the development of catalysts for cascade reactions. Due to composition and structure, MOFs can incorporate different types of sites at the metal nodes, organic linkers, or at the empty internal pores, allowing the flexible design and synthesis of multifunctional catalysts. After some introductory sections on the relevance of cascade reactions from the point of view of competitiveness, sustainability, and environmental friendliness, the main part of the text provides a comprehensive review of the literature reporting the use of MOFs as heterogeneous catalysts for cascade reactions including those that combine in different ways acid/base, oxidation/reduction, and metal-organic centers. The final section summarizes the current state of the art, indicating that the development of a first commercial synthesis of a high-added-value fine chemical will be a crucial milestone in this area.

  15. Hydrogen Storage in Metal-Organic Frameworks

    SciTech Connect

    Long, Jeffrey R.

    2016-04-28

    The design and characterization of new materials for hydrogen storage is an important area of research, as the ability to store hydrogen at lower pressures and higher temperatures than currently feasible would lower operating costs for small hydrogen fuel cell vehicles. In particular, metal-organic frameworks (MOFs) represent promising materials for use in storing hydrogen in this capacity. MOFs are highly porous, three-dimensional crystalline solids that are formed via linkages between metal ions (e.g., iron, nickel, and zinc) and organic molecules. MOFs can store hydrogen via strong adsorptive interactions between the gas molecules and the pores of the framework, providing a high surface area for gas adsorption and thus the opportunity to store hydrogen at significantly lower pressures than with current technologies. By lowering the energy required for hydrogen storage, these materials hold promise in rendering hydrogen a more viable fuel for motor vehicles, which is a highly desirable outcome given the clean nature of hydrogen fuel cells (water is the only byproduct of combustion) and the current state of global climate change resulting from the combustion of fossil fuels. The work presented in this report is the result of collaborative efforts between researchers at Lawrence Berkeley National Lab (LBNL), the National Institute of Standards and Technology (NIST), and General Motors Corporation (GM) to discover novel MOFs promising for H2 storage and characterize their properties. Described herein are several new framework systems with improved gravimetric and volumetric capacity to strongly bind H2 at temperatures relevant for vehicle storage. These materials were rigorously characterized using neutron diffraction, to determine the precise binding locations of hydrogen within the frameworks, and high-pressure H2 adsorption measurements, to provide a comprehensive picture of H2 adsorption at all relevant pressures. A

  16. Stimulus-responsive metal-organic frameworks.

    PubMed

    Nagarkar, Sanjog S; Desai, Aamod V; Ghosh, Sujit K

    2014-09-01

    Materials that can recognize the changes in their local environment and respond by altering their inherent physical and/or chemical properties are strong candidates for future "smart" technology materials. Metal-organic frameworks (MOFs) have attracted a great deal of attention in recent years owing to their designable architecture, host-guest chemistry, and softness as porous materials. Despite this fact, studies on the tuning of the properties of MOFs by external stimuli are still rare. This review highlights the recent developments in the field of stimulus-responsive MOFs or so-called smart MOFs. In particular, the various stimuli used and the utility of stimulus-responsive smart MOFs for various applications such as gas storage and separation, sensing, clean energy, catalysis, molecular motors, and biomedical applications are highlighted by using representative examples. Future directions in the developments of stimulus-responsive smart MOFs and their applications are proposed from a personal perspective.

  17. An Electrically Switchable Metal-Organic Framework

    NASA Astrophysics Data System (ADS)

    Fernandez, Carlos A.; Martin, Paul C.; Schaef, Todd; Bowden, Mark E.; Thallapally, Praveen K.; Dang, Liem; Xu, Wu; Chen, Xilin; McGrail, B. Peter

    2014-08-01

    Crystalline metal organic framework (MOF) materials containing interconnected porosity can be chemically modified to promote stimulus-driven (light, magnetic or electric fields) structural transformations that can be used in a number of devices. Innovative research strategies are now focused on understanding the role of chemical bond manipulation to reversibly alter the free volume in such structures of critical importance for electro-catalysis, molecular electronics, energy storage technologies, sensor devices and smart membranes. In this letter, we study the mechanism for which an electrically switchable MOF composed of Cu(TCNQ) (TCNQ = 7,7,8,8-tetracyanoquinodimethane) transitions from a high-resistance state to a conducting state in a reversible fashion by an applied potential. The actual mechanism for this reversible electrical switching is still not understood even though a number of reports are available describing the application of electric-field-induced switching of Cu(TCNQ) in device fabrication.

  18. Emerging Multifunctional Metal-Organic Framework Materials.

    PubMed

    Li, Bin; Wen, Hui-Min; Cui, Yuanjing; Zhou, Wei; Qian, Guodong; Chen, Banglin

    2016-10-01

    Metal-organic frameworks (MOFs), also known as coordination polymers, represent an interesting type of solid crystalline materials that can be straightforwardly self-assembled through the coordination of metal ions/clusters with organic linkers. Owing to the modular nature and mild conditions of MOF synthesis, the porosities of MOF materials can be systematically tuned by judicious selection of molecular building blocks, and a variety of functional sites/groups can be introduced into metal ions/clusters, organic linkers, or pore spaces through pre-designing or post-synthetic approaches. These unique advantages enable MOFs to be used as a highly versatile and tunable platform for exploring multifunctional MOF materials. Here, the bright potential of MOF materials as emerging multifunctional materials is highlighted in some of the most important applications for gas storage and separation, optical, electric and magnetic materials, chemical sensing, catalysis, and biomedicine.

  19. Multifunctional Metal-Organic Frameworks for Photocatalysis.

    PubMed

    Wang, Sibo; Wang, Xinchen

    2015-07-01

    Metal-organic frameworks (MOFs) have attracted significant research attention in diverse areas due to their unique physical and chemical characteristics that allow their innovative application in various research fields. Recently, the application of MOFs in heterogeneous photocatalysis for water splitting, CO2 reduction, and organic transformation have emerged, aiming at providing alternative solutions to address the world-wide energy and environmental problems by taking advantage of the unique porous structure together with ample physicochemical properties of the metal centers and organic ligands in MOFs. In this review, the latest progress in MOF-involved solar-to-chemical energy conversion reactions are summarized according to their different roles in the photoredox chemical systems, e.g., photocatalysts, co-catalysts, and hosts. The achieved progress and existing problems are evaluated and proposed, and the opportunities and challenges of MOFs and their related materials for their advanced development in photocatalysis are discussed and anticipated.

  20. An Electrically Switchable Metal-Organic Framework

    SciTech Connect

    Fernandez, Carlos A.; Martin, Paul F.; Schaef, Herbert T.; Bowden, Mark E.; Thallapally, Praveen K.; Dang, Liem X.; Xu, Wu; Chen, Xilin; McGrail, B. Peter

    2014-08-19

    Crystalline metal organic framework (MOF) materials containing interconnected porosity can be chemically modified to promote stimulus-driven (light, magnetic or electric fields) structural transformations that can be used in a number of devices. Innovative research strategies are now focused on understanding the role of chemical bond manipulation to reversibly alter the free volume in such structures of critical importance for electro-catalysis, molecular electronics, energy storage technologies, sensor devices and smart membranes. In this letter, we study the mechanism for which an electrically switchable MOF composed of Cu(TCNQ) (TCNQ 5 7,7,8,8-tetracyanoquinodimethane) transitions from a high-resistance state to a conducting state in a reversible fashion by an applied potential. The actual mechanism for this reversible electrical switching is still not understood even though a number of reports are available describing the application of electric-field-induced switching of Cu(TCNQ) in device fabrication.

  1. An Electrically Switchable Metal-Organic Framework

    SciTech Connect

    Fernandez, CA; Martin, PC; Schaef, T; Bowden, ME; Thallapally, PK; Dang, L; Xu, W; Chen, XL; McGrail, BP

    2014-08-19

    Crystalline metal organic framework (MOF) materials containing interconnected porosity can be chemically modified to promote stimulus-driven (light, magnetic or electric fields) structural transformations that can be used in a number of devices. Innovative research strategies are now focused on understanding the role of chemical bond manipulation to reversibly alter the free volume in such structures of critical importance for electro-catalysis, molecular electronics, energy storage technologies, sensor devices and smart membranes. In this letter, we study the mechanism for which an electrically switchable MOF composed of Cu(TCNQ) (TCNQ = 7,7,8,8-tetracyanoquinodimethane) transitions from a high-resistance state to a conducting state in a reversible fashion by an applied potential. The actual mechanism for this reversible electrical switching is still not understood even though a number of reports are available describing the application of electric-field-induced switching of Cu(TCNQ) in device fabrication.

  2. An Electrically Switchable Metal-Organic Framework

    PubMed Central

    Fernandez, Carlos A.; Martin, Paul C.; Schaef, Todd; Bowden, Mark E.; Thallapally, Praveen K.; Dang, Liem; Xu, Wu; Chen, Xilin; McGrail, B. Peter

    2014-01-01

    Crystalline metal organic framework (MOF) materials containing interconnected porosity can be chemically modified to promote stimulus-driven (light, magnetic or electric fields) structural transformations that can be used in a number of devices. Innovative research strategies are now focused on understanding the role of chemical bond manipulation to reversibly alter the free volume in such structures of critical importance for electro-catalysis, molecular electronics, energy storage technologies, sensor devices and smart membranes. In this letter, we study the mechanism for which an electrically switchable MOF composed of Cu(TCNQ) (TCNQ = 7,7,8,8-tetracyanoquinodimethane) transitions from a high-resistance state to a conducting state in a reversible fashion by an applied potential. The actual mechanism for this reversible electrical switching is still not understood even though a number of reports are available describing the application of electric-field-induced switching of Cu(TCNQ) in device fabrication. PMID:25135307

  3. Metal-organic framework materials with ultrahigh surface areas

    DOEpatents

    Farha, Omar K.; Hupp, Joseph T.; Wilmer, Christopher E.; Eryazici, Ibrahim; Snurr, Randall Q.; Gomez-Gualdron, Diego A.; Borah, Bhaskarjyoti

    2015-12-22

    A metal organic framework (MOF) material including a Brunauer-Emmett-Teller (BET) surface area greater than 7,010 m.sup.2/g. Also a metal organic framework (MOF) material including hexa-carboxylated linkers including alkyne bond. Also a metal organic framework (MOF) material including three types of cuboctahedron cages fused to provide continuous channels. Also a method of making a metal organic framework (MOF) material including saponifying hexaester precursors having alkyne bonds to form a plurality of hexa-carboxylated linkers including alkyne bonds and performing a solvothermal reaction with the plurality of hexa-carboxylated linkers and one or more metal containing compounds to form the MOF material.

  4. Bi–Mn mixed metal organic oxide: A novel 3d-6p mixed metal coordination network

    SciTech Connect

    Shi, Fa-Nian; Rosa Silva, Ana; Bian, Liang

    2015-05-15

    A new terminology of metal organic oxide (MOO) was given a definition as a type of coordination polymers which possess the feature of inorganic connectivity between metals and the direct bonded atoms and show 1D, 2D or 3D inorganic sub-networks. One such compound was shown as an example. A 3d-6p (Mn–Bi. Named MOOMnBi) mixed metals coordination network has been synthesized via hydrothermal method. The new compound with the molecular formula of [MnBi{sub 2}O(1,3,5-BTC){sub 2}]{sub n} (1,3,5-BTC stands for benzene-1,3,5-tricarboxylate) was characterized via single crystal X-ray diffraction technique that revealed a very interesting 3-dimensional (3D) framework with Bi{sub 4}O{sub 2}(COO){sub 12} clusters which are further connected to Mn(COO){sub 6} fragments into a 2D MOO. The topology study indicates an unprecedented topological type with the net point group of (4{sup 13}.6{sup 2})(4{sup 13}.6{sup 8})(4{sup 16}.6{sup 5})(4{sup 18}.6{sup 10})(4{sup 22}.6{sup 14})(4{sup 3}) corresponding to 3,6,7,7,8,9-c hexa-nodal net. MOOMnBi shows catalytic activity in the synthesis of (E)-α,β-unsaturated ketones. - Graphical abstract: This metal organic framework (MOF) is the essence of a 2D metal organic oxide (MOO). - Highlights: • New concept of metal organic oxide (MOO) was defined and made difference from metal organic framework. • New MOO of MOOMnBi was synthesized by hydrothermal method. • Crystal structure of MOOMnBi was determined by single crystal X-ray analysis. • The catalytic activity of MOOMnBi was studied showing reusable after 2 cycles.

  5. Thermodynamics of metal-organic frameworks

    SciTech Connect

    Wu, Di; Navrotsky, Alexandra

    2015-03-15

    Although there have been extensive studies over the past decade in the synthesis and application of metal-organic frameworks (MOFs), investigation of their thermodynamic stability and of the energetics of guest–host interactions has been much more limited. This review summarizes recent progress in experimental (calorimetric) determination of the thermodynamics of MOF materials. The enthalpies of MOFs relative to dense phase assemblages suggest only modest metastability, with a general increase of enthalpy with increasing molar volume, which becomes less pronounced at higher porosity. The energy landscape of nanoporous materials (inorganic and hybrid) consists of a pair of parallel patterns within a fairly narrow range of metastability of 5–30 kJ per mole of tetrahedra in zeolites and mesoporous silicas or per mole of metal in MOFs. Thus strong thermodynamic instability does not seem to limit framework formation. There are strong interactions within the chemisorption range for small molecule–MOF interactions with defined chemical binding at the metal centers or other specific locations. Coexistence of surface binding and confinement can lead to much stronger guest–host interactions. - Graphical abstract: Energy landscape of inorganic and hybrid porous materials. - Highlights: • Thermochemical data on various MOF structures were experimentally determined. • MOFs are moderately unstable relative to their dense phase assemblage. • Overall energetic landscape of porous materials was revealed. • Guest–host interactions in MOFs were evaluated directly using calorimetry. • Confinement effect and defined chemical binding lead to strong interactions.

  6. Metal-Organic Frameworks as Platforms for Functional Materials.

    PubMed

    Cui, Yuanjing; Li, Bin; He, Huajun; Zhou, Wei; Chen, Banglin; Qian, Guodong

    2016-03-15

    , carbon dioxide capture, and separations. The intrinsic optical and photonic properties of metal ions and organic ligands, and guest molecules and/or ions can be collaboratively assembled and/or encapsulated into their frameworks, so we have realized a series of novel MOF materials as ratiometric luminescent thermometers, O2 sensors, white-light-emitting materials, nonlinear optical materials, two-photon pumped lasing materials, and two-photon responsive materials for 3D patterning and data storage. Thanks to the interplay of the dual functionalities of metal-organic frameworks (the inherent porosity, and the intrinsic physical and chemical properties of inorganic and organic building blocks and encapsulated guest species), our research efforts have led to the development of functional MOF materials beyond our initial imaginations.

  7. Stepwise Synthesis of Metal-Organic Frameworks.

    PubMed

    Bosch, Mathieu; Yuan, Shuai; Rutledge, William; Zhou, Hong-Cai

    2017-03-28

    Metal-organic frameworks (MOFs) are a category of porous materials that offer unparalleled control over their surface areas (demonstrated as higher than for any other material), pore characteristics, and functionalization. This allows them to be customized for exceptional performance in a wide variety of applications, most commonly including gas storage and separation, drug delivery, luminescence, or heterogeneous catalysis. In order to optimize biomimicry, controlled separations and storage of small molecules, and detailed testing of structure-property relationships, one major goal of MOF research is "rational design" or "pore engineering", or precise control of the placement of multiple functional groups in pores of chosen sizes and shapes. MOF crystal growth can be controlled through judicious design of stepwise synthetic routes, which can also allow functionalization of MOFs in ways that were previously synthetically inaccessible. Organic chemists have developed a library of powerful techniques over the last century, allowing the total synthesis and detailed customization of complex molecules. Our hypothesis is that total synthesis is also possible for customized porous materials, through the development of similar multistep techniques. This will enable the rational design of MOFs, which is a major goal of many researchers in the field. We have begun developing a library of stepwise synthetic techniques for MOFs, allowing the synthesis of ultrastable MOFs with multiple crystallographically ordered and customizable functional groups at controlled locations within the pores. In order to design MOFs with precise control over pore size and shape, stability, and the placement of multiple different functional groups within the pores at tunable distances from one another, we have concentrated on methods which allow us to circumvent the lack of control inherent to one-pot MOF crystallization. Kinetically tuned dimensional augmentation (KTDA) is an approach using

  8. Thermodynamics of Metal-Organic Frameworks

    NASA Astrophysics Data System (ADS)

    Hughes, James Thomas

    Metal-Organic Frameworks (MOF) are crystalline nanoporous lattices constructed from the combination of cation and multi-dentate organic molecules. MOFs can display both chemical and thermal robustness while having large surface areas and pore volumes. In addition the modular composition of MOFs allows a degree of design and control of MOF structures. These unique physical properties have attracted wide interest and position MOFs to make meaningful contributions towards many applications, such as adsorption, catalysis, separation, and sensing. Despite the extensive investigative work over the last decade on MOF materials, the initial synthesis is still done by trial and error. Of the identified structures some MOFs are robust while others are fragile. It is unclear what role thermodynamics plays in the formation energies of MOFs and guest molecules interactions within the pores. Better understanding of thermochemical properties of MOFs is critical if MOF synthesis is to obtain true predictive design. To address these questions aqueous solution calorimetry was performed on ten different frameworks in both the as-synthesized and activated state. To understand the structural energetics of MOFs, the heat of formation from dense states (metal oxide and protonated organic linkers) to the open MOF framework was measured. Chapter 2 discusses the new aqueous calorimetry methodology developed to measure the enthalpy of solution for hybrid materials. Chapters 3, 4 and 5 detail the enthalpies of formation from their dense states of the frameworks: (MOF-5, ZIF-zni, ZIF-1, ZIF-3, ZIF-4, ZIF-7, ZIF-8, ZIF-9 and Cu-HKUST-1). These chapters also compare the MOF heat of formation energetics to those of zeolites, zeotypes and mesoporous silica materials. Finding that MOFs are metastable with respect to their dense states (metal oxide and protonated organic), following the current destabilization trend of the main group porous materials. The thermochemical effect of solvent on the MOF

  9. Hydrogen Storage in Metal-Organic Frameworks

    SciTech Connect

    Omar M. Yaghi

    2012-04-26

    Conventional storage of large amounts of hydrogen in its molecular form is difficult and expensive because it requires employing either extremely high pressure gas or very low temperature liquid. Because of the importance of hydrogen as a fuel, the DOE has set system targets for hydrogen storage of gravimetric (5.5 wt%) and volumetric (40 g L-1) densities to be achieved by 2015. Given that these are system goals, a practical material will need to have higher capacity when the weight of the tank and associated cooling or regeneration system is considered. The size and weight of these components will vary substantially depending on whether the material operates by a chemisorption or physisorption mechanism. In the latter case, metal-organic frameworks (MOFs) have recently been identified as promising adsorbents for hydrogen storage, although little data is available for their sorption behavior. This grant was focused on the study of MOFs with these specific objectives. (1) To examine the effects of functionalization, catenation, and variation of the metal oxide and organic linkers on the low-pressure hydrogen adsorption properties of MOFs. (2) To develop a strategy for producing MOFs with high surface area and porosity to reduce the dead space and increase the hydrogen storage capacity per unit volume. (3) To functionalize MOFs by post synthetic functionalization with metals to improve the adsorption enthalpy of hydrogen for the room temperature hydrogen storage. This effort demonstrated the importance of open metal sites to improve the adsorption enthalpy by the systematic study, and this is also the origin of the new strategy, which termed isoreticular functionalization and metalation. However, a large pore volume is still a prerequisite feature. Based on our principle to design highly porous MOFs, guest-free MOFs with ultrahigh porosity have been experimentally synthesized. MOF-210, whose BET surface area is 6240 m2 g-1 (the highest among porous solids), takes up

  10. Four 3D "brick-wall"-like metal-organic frameworks with a flexible ligand of (S,S,R,R)-1,2,3,4-cyclopentanetetracarboxylic acid: crystal structures, luminescent and magnetic properties.

    PubMed

    Cui, Lin; Luan, Xin-Jun; Zhang, Cui-Ping; Kang, Yi-Fan; Zhang, Wen-Tao; Wang, Yao-Yu; Shi, Qi-Zhen

    2013-02-07

    To investigate the conformation of cyclopentanetetracarboxylic acid, four new "brick-wall"-like metal-organic frameworks have been synthesized from hydrothermal reactions with different metal salts, (S,S,R,R)-1,2,3,4-cyclopentanetetracarboxylic acid (H(4)cptc) and auxiliary N-donor ligands, namely, Cu(2)(S,S,R,R-cptc)(bpe)(H(2)O)(2)·2H(2)O (1), Co(2)(S,S,R,R-cptc)(bpe)(0.5)(H(2)O)(2)·2H(2)O (2), Cd(4)(S,S,R,R-cptc)(2)(bpa)(2)(H(2)O)(5)·2H(2)O (3) and Co(2)(S,S,R,R-cptc)(bpy)(0.5)(H(2)O)(2)·2(H(2)O) (4) (bpe = 4-(2-(pyridine-4-yl)vinyl)pyridine, bpa = 4-(2-(pyridine-4-yl)ethyl)pyridine, bpy = 4-(pyridine-4-yl)pyridine). The complexes were further characterized by single-crystal X-ray diffraction, power X-ray diffraction, FT-IR spectra, fluorescent measurements and variable-temperature magnetic susceptibility measurements. The results of the structural investigations show that 1 is a charming (3,3,4)-trinodal architecture, 3 is an interesting trinodal (3,4,5)-connected architecture, and 2 and 4 are isostructural, which are both (4,5)-connected networks. In addition, the magnetic measurements indicate that 2 and 4 show weak antiferromagnetic interactions, and the fluorescent measurement shows the strong solid-state fluorescent emission at room temperature for 3.

  11. Porous materials: Lining up metal-organic frameworks

    NASA Astrophysics Data System (ADS)

    Champness, Neil R.

    2017-02-01

    A new report demonstrates an innovative approach to aligning crystallites of metal-organic frameworks such that thin films are created with oriented channels -- potentially overcoming one of the major barriers to application of these highly topical materials.

  12. From metal-organic framework to intrinsically fluorescent carbon nanodots.

    PubMed

    Amali, Arlin Jose; Hoshino, Hideto; Wu, Chun; Ando, Masanori; Xu, Qiang

    2014-07-01

    Highly photoluminescent carbon nanodots (CNDs) were synthesized for the first time from metal-organic framework (MOF, ZIF-8) nanoparticles. Coupled with fluorescence and non-toxic characteristics, these carbon nanodots could potentially be used in biosafe color patterning.

  13. Metal-organic framework for the separation of alkane isomers

    DOEpatents

    Long, Jeffrey R.; Herm, Zoey R.; Wiers, Brian M.; Krishna, Rajamani

    2017-01-10

    A metal organic framework Fe.sub.2(bdp).sub.3 (BDP.sup.2-=1,4-benzenedipyrazolate) with triangular channels is particularly suited for C5-C7 separations of alkanes according to the number of branches in the molecule rather than by carbon number. The metal-organic framework can offer pore geometries that is unavailable in zeolites or other porous media, facilitating distinct types of shape-based molecular separations.

  14. Metal-organic frameworks: Shuttling in the solid state

    NASA Astrophysics Data System (ADS)

    Olson, Mark A.

    2015-06-01

    Incorporating mechanically interlocked molecular shuttles within a metal-organic framework that has enough free space in the crystal lattice to permit volume-conserving translational motion sets the stage for defect-free molecular-electronic device fabrication and more.

  15. Omar Yaghi on Chemistry and Metal Organic Frameworks

    SciTech Connect

    Omar Yaghi

    2012-07-23

    In this edited version of the hour long talk, Omar Yaghi, director of the Molecular Foundry, sat down in conversation with Jeff Miller, head of Public Affairs, on July 11th, 2012 to discuss his fascination with the hidden world of chemistry and his work on Metal Organic Frameworks.

  16. Omar Yaghi on Chemistry and Metal Organic Frameworks

    ScienceCinema

    Omar Yaghi

    2016-07-12

    In this edited version of the hour long talk, Omar Yaghi, director of the Molecular Foundry, sat down in conversation with Jeff Miller, head of Public Affairs, on July 11th, 2012 to discuss his fascination with the hidden world of chemistry and his work on Metal Organic Frameworks.

  17. Toxic Industrial Chemical Removal by Isostructural Metal-Organic Frameworks

    DTIC Science & Technology

    2011-01-01

    ISOSTRUCTURAL METAL-ORGANIC FRAMEWORKS Gregory W. Peterson RESEARCH AND TECHNOLOGY DIRECTORATE T. Grant Glover Bryan J. Schindler SCIENCE...APPLICATIONS INTERNATIONAL CORPORATION Gunpowder, MD 21010-0068 David Britt Omar Yaghi UNIVERSITY OF CALIFORNIA Los Angeles, CA 90095-1569 January 2011...Frameworks 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) Peterson, Gregory W. (ECBC); Glover, T. Grant; Schindler

  18. A metal-organic framework-derived bifunctional oxygen electrocatalyst

    NASA Astrophysics Data System (ADS)

    Xia, Bao Yu; Yan, Ya; Li, Nan; Wu, Hao Bin; Lou, Xiong Wen (David); Wang, Xin

    2016-01-01

    Oxygen electrocatalysis is of great importance for many energy storage and conversion technologies, including fuel cells, metal-air batteries and water electrolysis. Replacing noble metal-based electrocatalysts with highly efficient and inexpensive non-noble metal-based oxygen electrocatalysts is critical for the practical applications of these technologies. Here we report a general approach for the synthesis of hollow frameworks of nitrogen-doped carbon nanotubes derived from metal-organic frameworks, which exhibit higher electrocatalytic activity and stability for oxygen reduction and evolution than commercial Pt/C electrocatalysts. The remarkable electrochemical properties are mainly attributed to the synergistic effect from chemical compositions and the robust hollow structure composed of interconnected crystalline nitrogen-doped carbon nanotubes. The presented strategy for controlled design and synthesis of metal-organic framework-derived functional nanomaterials offers prospects in developing highly active electrocatalysts in electrochemical energy devices.

  19. Bi-Mn mixed metal organic oxide: A novel 3d-6p mixed metal coordination network

    NASA Astrophysics Data System (ADS)

    Shi, Fa-Nian; Rosa Silva, Ana; Bian, Liang

    2015-05-01

    A new terminology of metal organic oxide (MOO) was given a definition as a type of coordination polymers which possess the feature of inorganic connectivity between metals and the direct bonded atoms and show 1D, 2D or 3D inorganic sub-networks. One such compound was shown as an example. A 3d-6p (Mn-Bi. Named MOOMnBi) mixed metals coordination network has been synthesized via hydrothermal method. The new compound with the molecular formula of [MnBi2O(1,3,5-BTC)2]n (1,3,5-BTC stands for benzene-1,3,5-tricarboxylate) was characterized via single crystal X-ray diffraction technique that revealed a very interesting 3-dimensional (3D) framework with Bi4O2(COO)12 clusters which are further connected to Mn(COO)6 fragments into a 2D MOO. The topology study indicates an unprecedented topological type with the net point group of {413.62}{413.68}{416.65}{418.610}{422.614}{43} corresponding to 3,6,7,7,8,9-c hexa-nodal net. MOOMnBi shows catalytic activity in the synthesis of (E)-α,β-unsaturated ketones.

  20. Single crystalline hollow metal-organic frameworks: a metal-organic polyhedron single crystal as a sacrificial template.

    PubMed

    Kim, Hyehyun; Oh, Minhak; Kim, Dongwook; Park, Jeongin; Seong, Junmo; Kwak, Sang Kyu; Lah, Myoung Soo

    2015-02-28

    Single crystalline hollow metal-organic frameworks (MOFs) with cavity dimensions on the order of several micrometers and hundreds of micrometers were prepared using a metal-organic polyhedron single crystal as a sacrificial hard template. The hollow nature of the MOF crystal was confirmed by scanning electron microscopy of the crystal sliced using a focused ion beam.

  1. Metallacarboranes: Towards promising hydrogen storage metal organic framework

    NASA Astrophysics Data System (ADS)

    Singh, Abhishek; Sadrzadeh, Arta; Yakobson, Boris

    2011-03-01

    Using first principles calculations we show the high hydrogen storage capacity of metallacarboranes, where the transition metal (TM) atoms bind hydrogen via Kubas interaction. The average binding energy of ~ 0.3 eV/H favorably lies within the reversible adsorption range The Sc and Ti are found to be the optimum metal atoms maximizing the number of stored H2 molecules. Depending upon the structure, metallacarboranes can adsorb up to 8 wt% of hydrogen, which exceeds DOE goal for 2015. Being integral part of the cage, TMs do not suffer from the aggregation problem. Furthermore, the presence of carbon atom in the cages permits linking the metallacarboranes to form metal organic frameworks (MOF), thus able to adsorb hydrogen via Kubas interaction, in addition to van der Waals physisorption. A. K. Singh, A. Sadrzadeh, and B. I. Yakobson, Metallacarboranes: Toward Promising Hydrogen Storage Metal Organic Frameworks, JACS 132,14126 (2010).

  2. Metal-Organic Frameworks for Thin-Layer Chromatographic Applications.

    PubMed

    Schenk, Claudia; Kutzscher, Christel; Drache, Franziska; Helten, Stella; Senkovska, Irena; Kaskel, Stefan

    2017-01-25

    Preparation of thin-layer chromatographic (TLC) plates based on metal-organic frameworks (MOFs) as porous stationary phases is described. DUT-67 (DUT = Dresden University of Technology), a zirconium based MOF, was used in combination with a fluorescent indicator as stationary phase for analyzing a small selection of a wide spectrum of relevant analytes. The successful separation of benzaldehyde from trans-cinnamaldehyde and 4-aminophenol from 2-aminotoluene is reported as a model system using optimized eluent mixtures containing acetic acid.

  3. Mechanochemical synthesis of an yttrium based metal-organic framework.

    PubMed

    Singh, Niraj K; Hardi, Meenakshi; Balema, Viktor P

    2013-02-01

    For the first time a metal hydride has been used for the preparation of a metal-organic framework. MIL-78 has been synthesized by the solid-state mechanochemical reaction between yttrium hydride and trimesic acid. The process does not involve solvents and does not generate liquid by-products, thus proving the viability of the solid-state approach to the synthesis of MOFs.

  4. Evaluating metal-organic frameworks for natural gas storage

    SciTech Connect

    Mason, JA; Veenstra, M; Long, JR

    2014-01-01

    Metal-organic frameworks have received significant attention as a new class of adsorbents for natural gas storage; however, inconsistencies in reporting high-pressure adsorption data and a lack of comparative studies have made it challenging to evaluate both new and existing materials. Here, we briefly discuss high-pressure adsorption measurements and review efforts to develop metal-organic frameworks with high methane storage capacities. To illustrate the most important properties for evaluating adsorbents for natural gas storage and for designing a next generation of improved materials, six metal-organic frameworks and an activated carbon, with a range of surface areas, pore structures, and surface chemistries representative of the most promising adsorbents for methane storage, are evaluated in detail. High-pressure methane adsorption isotherms are used to compare gravimetric and volumetric capacities, isosteric heats of adsorption, and usable storage capacities. Additionally, the relative importance of increasing volumetric capacity, rather than gravimetric capacity, for extending the driving range of natural gas vehicles is highlighted. Other important systems-level factors, such as thermal management, mechanical properties, and the effects of impurities, are also considered, and potential materials synthesis contributions to improving performance in a complete adsorbed natural gas system are discussed.

  5. Chiral Cu(salen)-Based Metal-Organic Framework for Heterogeneously Catalyzed Aziridination and Amination of Olefins.

    PubMed

    Liu, Yan; Li, Zijian; Yuan, Guozan; Xia, Qingchun; Yuan, Chen; Cui, Yong

    2016-12-19

    A homochiral 3D porous metal-organic framework was assembled from a chiral dicarboxylic acid-functionalized Cu(salen)-based catalyst and could serve as an efficient heterogeneous catalyst for aziridination and allylic amination of olefins. Besides easy separation and reuse of the catalyst, the chiral framework confinement could impart substrate size selectivity, enhance catalyst activity, and induce product enantioselectivity.

  6. Applications of metal-organic frameworks in heterogeneous supramolecular catalysis.

    PubMed

    Liu, Jiewei; Chen, Lianfen; Cui, Hao; Zhang, Jianyong; Zhang, Li; Su, Cheng-Yong

    2014-08-21

    This review summarizes the use of metal-organic frameworks (MOFs) as a versatile supramolecular platform to develop heterogeneous catalysts for a variety of organic reactions, especially for liquid-phase reactions. Following a background introduction about catalytic relevance to various metal-organic materials, crystal engineering of MOFs, characterization and evaluation methods of MOF catalysis, we categorize catalytic MOFs based on the types of active sites, including coordinatively unsaturated metal sites (CUMs), metalloligands, functional organic sites (FOS), as well as metal nanoparticles (MNPs) embedded in the cavities. Throughout the review, we emphasize the incidental or deliberate formation of active sites, the stability, heterogeneity and shape/size selectivity for MOF catalysis. Finally, we briefly introduce their relevance into photo- and biomimetic catalysis, and compare MOFs with other typical porous solids such as zeolites and mesoporous silica with regard to their different attributes, and provide our view on future trends and developments in MOF-based catalysis.

  7. Transition metal complexes supported on metal-organic frameworks for heterogeneous catalysts

    DOEpatents

    Farha, Omar K.; Hupp, Joseph T.; Delferro, Massimiliano; Klet, Rachel C.

    2017-02-07

    A robust mesoporous metal-organic framework comprising a hafnium-based metal-organic framework and a single-site zirconium-benzyl species is provided. The hafnium, zirconium-benzyl metal-organic framework is useful as a catalyst for the polymerization of an alkene.

  8. Evolution of form in metal-organic frameworks

    NASA Astrophysics Data System (ADS)

    Lee, Jiyoung; Kwak, Ja Hun; Choe, Wonyoung

    2017-01-01

    Self-assembly has proven to be a widely successful synthetic strategy for functional materials, especially for metal-organic materials (MOMs), an emerging class of porous materials consisting of metal-organic frameworks (MOFs) and metal-organic polyhedra (MOPs). However, there are areas in MOM synthesis in which such self-assembly has not been fully utilized, such as controlling the interior of MOM crystals. Here we demonstrate sequential self-assembly strategy for synthesizing various forms of MOM crystals, including double-shell hollow MOMs, based on single-crystal to single-crystal transformation from MOP to MOF. Moreover, this synthetic strategy also yields other forms, such as solid, core-shell, double and triple matryoshka, and single-shell hollow MOMs, thereby exhibiting form evolution in MOMs. We anticipate that this synthetic approach might open up a new direction for the development of diverse forms in MOMs, with highly advanced areas such as sequential drug delivery/release and heterogeneous cascade catalysis targeted in the foreseeable future.

  9. Metal-Organic Frameworks for Highly Selective Separations

    SciTech Connect

    Omar M. Yaghi

    2009-09-28

    This grant was focused on the study of metal-organic frameworks with these specific objectives. (1) To examine the use of MOFs with well-defined open metal sites for binding of gases and small organics. (2) To develop a strategy for producing MOFs that combine large pore size with high surface area for their use in gas adsorption and separation of polycyclic organic compounds. (3) To functionalize MOFs for the storage of inert gases such as methane. A brief outline of our progress towards these objectives is presented here as it forms part of the basis for the ideas to be developed under the present proposal.

  10. The surface chemistry of metal-organic frameworks.

    PubMed

    McGuire, Christina V; Forgan, Ross S

    2015-03-28

    Metal-organic frameworks (MOFs) have received particular attention over the last 20 years as a result of their attractive properties offering potential applications in a number of areas. Typically, these characteristics are tuned by functionalisation of the bulk of the MOF material itself. This Feature Article focuses instead on modification of MOF particles at their surfaces only, which can also offer control over the bulk properties of the material. The differing surface modification techniques available to the synthetic chemist will be discussed, with a focus on the effect of surface modification of MOFs on their fundamental properties and application in adsorption, catalysis, drug delivery and other areas.

  11. Surface functionalization of metal organic frameworks for mixed matrix membranes

    DOEpatents

    Albenze, Erik; Lartey, Michael; Li, Tao; Luebke, David R.; Nulwala, Hunaid B.; Rosi, Nathaniel L.; Venna, Surendar R.

    2017-03-21

    Mixed Matrix Membrane (MMM) are composite membranes for gas separation and comprising a quantity of inorganic filler particles, in particular metal organic framework (MOF), dispersed throughout a polymer matrix comprising one or more polymers. This disclosure is directed to MOF functionalized through addition of a pendant functional group to the MOF, in order to improve interaction with a surrounding polymer matrix in a MMM. The improved interaction aids in avoiding defects in the MMM due to incompatible interfaces between the polymer matrix and the MOF particle, in turn increasing the mechanical and gas separation properties of the MMM. The disclosure is also directed to a MMM incorporating the surface functionalized MOF.

  12. Stimuli-Responsive Metal Organic Frameworks: Stimuli-Responsive Metal Organic Frameworks for Energy-Efficient Post Combustion Capture

    SciTech Connect

    2010-07-01

    IMPACCT Project: A team led by three professors at Texas A&M is developing a subset of metal organic frameworks that respond to stimuli such as small changes in temperature to trap CO2 and then release it for storage. These frameworks are a promising class of materials for carbon capture applications because their structure and chemistry can be controlled with great precision. Because the changes in temperature required to trap and release CO2 in Texas A&M’s frameworks are much smaller than in other carbon capture approaches, the amount of energy or stimulus that has to be diverted from coal-fired power plants to accomplish this is greatly reduced. The team is working to alter the materials so they bind only with CO2, and are stable enough to withstand the high temperatures found in the chimneys of coal-fired power plants.

  13. Metal-organic frameworks with dynamic interlocked components

    NASA Astrophysics Data System (ADS)

    Vukotic, V. Nicholas; Harris, Kristopher J.; Zhu, Kelong; Schurko, Robert W.; Loeb, Stephen J.

    2012-06-01

    The dynamics of mechanically interlocked molecules such as rotaxanes and catenanes have been studied in solution as examples of rudimentary molecular switches and machines, but in this medium, the molecules are randomly dispersed and their motion incoherent. As a strategy for achieving a higher level of molecular organization, we have constructed a metal-organic framework material using a [2]rotaxane as the organic linker and binuclear Cu(II) units as the nodes. Activation of the as-synthesized material creates a void space inside the rigid framework that allows the soft macrocyclic ring of the [2]rotaxane to rotate rapidly, unimpeded by neighbouring molecular components. Variable-temperature 13C and 2H solid-state NMR experiments are used to characterize the nature and rate of the dynamic processes occurring inside this unique material. These results provide a blueprint for the future creation of solid-state molecular switches and molecular machines based on mechanically interlocked molecules.

  14. Metal-organic frameworks for Xe/Kr separation

    DOEpatents

    Ryan, Patrick J.; Farha, Omar K.; Broadbelt, Linda J.; Snurr, Randall Q.; Bae, Youn-Sang

    2013-08-27

    Metal-organic framework (MOF) materials are provided and are selectively adsorbent to xenon (Xe) over another noble gas such as krypton (Kr) and/or argon (Ar) as a result of having framework voids (pores) sized to this end. MOF materials having pores that are capable of accommodating a Xe atom but have a small enough pore size to receive no more than one Xe atom are desired to preferentially adsorb Xe over Kr in a multi-component (Xe--Kr mixture) adsorption method. The MOF material has 20% or more, preferably 40% or more, of the total pore volume in a pore size range of 0.45-0.75 nm which can selectively adsorb Xe over Kr in a multi-component Xe--Kr mixture over a pressure range of 0.01 to 1.0 MPa.

  15. Metal-organic frameworks for Xe/Kr separation

    DOEpatents

    Ryan, Patrick J.; Farha, Omar K.; Broadbelt, Linda J.; Snurr, Randall Q.; Bae, Youn-Sang

    2014-07-22

    Metal-organic framework (MOF) materials are provided and are selectively adsorbent to xenon (Xe) over another noble gas such as krypton (Kr) and/or argon (Ar) as a result of having framework voids (pores) sized to this end. MOF materials having pores that are capable of accommodating a Xe atom but have a small enough pore size to receive no more than one Xe atom are desired to preferentially adsorb Xe over Kr in a multi-component (Xe--Kr mixture) adsorption method. The MOF material has 20% or more, preferably 40% or more, of the total pore volume in a pore size range of 0.45-0.75 nm which can selectively adsorb Xe over Kr in a multi-component Xe--Kr mixture over a pressure range of 0.01 to 1.0 MPa.

  16. Metal-organic organopolymeric hybrid framework by reversible [2+2] cycloaddition reaction.

    PubMed

    Park, In-Hyeok; Chanthapally, Anjana; Zhang, Zhenjie; Lee, Shim Sung; Zaworotko, Michael J; Vittal, Jagadese J

    2014-01-07

    Organic polymers are usually amorphous or possess very low crystallinity. The metal complexes of organic polymeric ligands are also difficult to crystallize by traditional methods because of their poor solubilities and their 3D structures can not be determined by single-crystal X-ray crystallography owing to a lack of single crystals. Herein, we report the crystal structure of a 1D Zn(II) coordination polymer fused with an organic polymer ligand made in situ by a [2+2] cycloaddition reaction of a six-fold interpenetrated metal-organic framework. It is also shown that this organic polymer ligand can be depolymerized in a single-crystal-to-single-crystal (SCSC) fashion by heating. This strategy could potentially be extended to make a range of monocrystalline metal organopolymeric complexes and metal-organic organopolymeric hybrid materials. Such monocrystalline metal complexes of organic polymers have hitherto been inaccessible for materials researchers.

  17. Imparting biomolecules to a metal-organic framework material by controlled DNA tetrahedron encapsulation.

    PubMed

    Jia, Yongmei; Wei, Benmei; Duan, Ruixue; Zhang, Ying; Wang, Boya; Hakeem, Abdul; Liu, Nannan; Ou, Xiaowen; Xu, Shaofang; Chen, Zhifei; Lou, Xiaoding; Xia, Fan

    2014-08-04

    Recently, the incorporation of biomolecules in Metal-organic frameworks (MOFs) attracts many attentions because of controlling the functions, properties and stability of trapped molecules. Although there are few reports on protein/MOFs composites and their applications, none of DNA/MOFs composite is reported, as far as we know. Here, we report a new composite material which is self-assembled from 3D DNA (guest) and pre-synthesized MOFs (host) by electrostatic interactions and hydrophilic interactions in a well-dispersed fashion. Its biophysical characterization is well analyzed by fluorescence spectroscopy, quartz crystal microbalance (QCM) and transmission electron microscopy (TEM). This new composite material keeps 3D DNA nanostructure more stable than only 3D DNA nanostructure in DI water at room temperature, and stores amounts of genetic information. It will make DNA as a guest for MOFs and MOFs become a new platform for the development of DNA nanotechnology.

  18. Increasing the Stability of Metal-Organic Frameworks

    DOE PAGES

    Bosch, Mathieu; Zhang, Muwei; Zhou, Hong-Cai

    2014-01-01

    Metal-organic frameworks (MOFs) are a new category of advanced porous materials undergoing study by many researchers for their vast variety of both novel structures and potentially useful properties arising from them. Their high porosities, tunable structures, and convenient process of introducing both customizable functional groups and unsaturated metal centers have afforded excellent gas sorption and separation ability, catalytic activity, luminescent properties, and more. However, the robustness and reactivity of a given framework are largely dependent on its metal-ligand interactions, where the metal-containing clusters are often vulnerable to ligand substitution by water or other nucleophiles, meaning that the frameworks may collapsemore » upon exposure even to moist air. Other frameworks may collapse upon thermal or vacuum treatment or simply over time. This instability limits the practical uses of many MOFs. In order to further enhance the stability of the framework, many different approaches, such as the utilization of high-valence metal ions or nitrogen-donor ligands, were recently investigated. This review details the efforts of both our research group and others to synthesize MOFs possessing drastically increased chemical and thermal stability, in addition to exemplary performance for catalysis, gas sorption, and separation.« less

  19. 3D Framework DNA Origami with Layered Crossovers.

    PubMed

    Hong, Fan; Jiang, Shuoxing; Wang, Tong; Liu, Yan; Yan, Hao

    2016-10-04

    Designer DNA architectures with nanoscale geometric controls provide a programmable molecular toolbox for engineering complex nanodevices. Scaffolded DNA origami has dramatically improved our ability to design and construct DNA nanostructures with finite size and spatial addressability. Here we report a novel design strategy to engineer multilayered wireframe DNA structures by introducing crossover pairs that connect neighboring layers of DNA double helices. These layered crossovers (LX) allow the scaffold or helper strands to travel through different layers and can control the relative orientation of DNA helices in neighboring layers. Using this design strategy, we successfully constructed four versions of two-layer parallelogram structures with well-defined interlayer angles, a three-layer structure with triangular cavities, and a 9- and 15-layer square lattices. This strategy provides a general route to engineer 3D framework DNA nanostructures with controlled cavities and opportunities to design host-guest networks analogs to those produced with metal organic frameworks.

  20. Metal-Organic Frameworks as Catalysts for Oxidation Reactions.

    PubMed

    Dhakshinamoorthy, Amarajothi; Asiri, Abdullah M; Garcia, Hermenegildo

    2016-06-06

    This Concept is aimed at describing the current state of the art in metal-organic frameworks (MOFs) as heterogeneous catalysts for liquid-phase oxidations, focusing on three important substrates, namely, alkenes, alkanes and alcohols. Emphases are on the nature of active sites that have been incorporated within MOFs and on future targets to be set in this area. Thus, selective alkene epoxidation with peroxides or oxygen catalyzed by constitutional metal nodes of MOFs as active sites are still to be developed. Moreover, no noble metal-free MOF has been reported to date that can act as a general catalyst for the aerobic oxidation of primary and secondary aliphatic alcohols. In contrast, in the case of alkanes, a target should be to tune the polarity of MOF internal pores to control the outcome of the autooxidation process, resulting in the selective formation of alcohol/ketone mixtures at high conversion.

  1. "Heterogeneity within order" in metal-organic frameworks.

    PubMed

    Furukawa, Hiroyasu; Müller, Ulrich; Yaghi, Omar M

    2015-03-09

    Metal-organic frameworks (MOFs) are constructed by linking inorganic units with organic linkers to make extended networks. Though more than 20 000 MOF structures have been reported most of these are ordered and largely composed of a limited number of different kinds building units, and very few have multiple different building units (heterogeneous). Although heterogeneity and multiplicity is a fundamental characteristic of biological systems, very few synthetic materials incorporate heterogeneity without losing crystalline order. Thus, the question arises: how do we introduce heterogeneity into MOFs without losing their ordered structure? This Review outlines strategies for varying the building units within both the backbone of the MOF and its pores to produce the heterogeneity that is sought after. The impact this heterogeneity imparts on the properties of a MOF is highlighted. We also provide an update on the MOF industry as part of this themed issue for the 150th anniversary of BASF.

  2. Structure and properties of an amorphous metal-organic framework.

    PubMed

    Bennett, Thomas D; Goodwin, Andrew L; Dove, Martin T; Keen, David A; Tucker, Matthew G; Barney, Emma R; Soper, Alan K; Bithell, Erica G; Tan, Jin-Chong; Cheetham, Anthony K

    2010-03-19

    ZIF-4, a metal-organic framework (MOF) with a zeolitic structure, undergoes a crystal-amorphous transition on heating to 300 degrees C. The amorphous form, which we term a-ZIF, is recoverable to ambient conditions or may be converted to a dense crystalline phase of the same composition by heating to 400 degrees C. Neutron and x-ray total scattering data collected during the amorphization process are used as a basis for reverse Monte Carlo refinement of an atomistic model of the structure of a-ZIF. The structure is best understood in terms of a continuous random network analogous to that of a-SiO2. Optical microscopy, electron diffraction and nanoindentation measurements reveal a-ZIF to be an isotropic glasslike phase capable of plastic flow on its formation. Our results suggest an avenue for designing broad new families of amorphous and glasslike materials that exploit the chemical and structural diversity of MOFs.

  3. Structure and Properties of an Amorphous Metal-Organic Framework

    NASA Astrophysics Data System (ADS)

    Bennett, Thomas D.; Goodwin, Andrew L.; Dove, Martin T.; Keen, David A.; Tucker, Matthew G.; Barney, Emma R.; Soper, Alan K.; Bithell, Erica G.; Tan, Jin-Chong; Cheetham, Anthony K.

    2010-03-01

    ZIF-4, a metal-organic framework (MOF) with a zeolitic structure, undergoes a crystal-amorphous transition on heating to 300°C. The amorphous form, which we term a-ZIF, is recoverable to ambient conditions or may be converted to a dense crystalline phase of the same composition by heating to 400°C. Neutron and x-ray total scattering data collected during the amorphization process are used as a basis for reverse Monte Carlo refinement of an atomistic model of the structure of a-ZIF. The structure is best understood in terms of a continuous random network analogous to that of a-SiO2. Optical microscopy, electron diffraction and nanoindentation measurements reveal a-ZIF to be an isotropic glasslike phase capable of plastic flow on its formation. Our results suggest an avenue for designing broad new families of amorphous and glasslike materials that exploit the chemical and structural diversity of MOFs.

  4. Transformation of metal-organic frameworks for molecular sieving membranes

    NASA Astrophysics Data System (ADS)

    Li, Wanbin; Zhang, Yufan; Zhang, Congyang; Meng, Qin; Xu, Zehai; Su, Pengcheng; Li, Qingbiao; Shen, Chong; Fan, Zheng; Qin, Lei; Zhang, Guoliang

    2016-04-01

    The development of simple, versatile strategies for the synthesis of metal-organic framework (MOF)-derived membranes are of increasing scientific interest, but challenges exist in understanding suitable fabrication mechanisms. Here we report a route for the complete transformation of a series of MOF membranes and particles, based on multivalent cation substitution. Through our approach, the effective pore size can be reduced through the immobilization of metal salt residues in the cavities, and appropriate MOF crystal facets can be exposed, to achieve competitive molecular sieving capabilities. The method can also be used more generally for the synthesis of a variety of MOF membranes and particles. Importantly, we design and synthesize promising MOF membranes candidates that are hard to achieve through conventional methods. For example, our CuBTC/MIL-100 membrane exhibits 89, 171, 241 and 336 times higher H2 permeance than that of CO2, O2, N2 and CH4, respectively.

  5. Transformation of metal-organic frameworks for molecular sieving membranes

    PubMed Central

    Li, Wanbin; Zhang, Yufan; Zhang, Congyang; Meng, Qin; Xu, Zehai; Su, Pengcheng; Li, Qingbiao; Shen, Chong; Fan, Zheng; Qin, Lei; Zhang, Guoliang

    2016-01-01

    The development of simple, versatile strategies for the synthesis of metal-organic framework (MOF)-derived membranes are of increasing scientific interest, but challenges exist in understanding suitable fabrication mechanisms. Here we report a route for the complete transformation of a series of MOF membranes and particles, based on multivalent cation substitution. Through our approach, the effective pore size can be reduced through the immobilization of metal salt residues in the cavities, and appropriate MOF crystal facets can be exposed, to achieve competitive molecular sieving capabilities. The method can also be used more generally for the synthesis of a variety of MOF membranes and particles. Importantly, we design and synthesize promising MOF membranes candidates that are hard to achieve through conventional methods. For example, our CuBTC/MIL-100 membrane exhibits 89, 171, 241 and 336 times higher H2 permeance than that of CO2, O2, N2 and CH4, respectively. PMID:27090597

  6. Recent progress in the synthesis of metal-organic frameworks

    NASA Astrophysics Data System (ADS)

    Sun, Yujia; Zhou, Hong-Cai

    2015-10-01

    Metal-organic frameworks (MOFs) have attracted considerable attention for various applications due to their tunable structure, porosity and functionality. In general, MOFs have been synthesized from isolated metal ions and organic linkers under hydrothermal or solvothermal conditions via one-spot reactions. The emerging precursor approach and kinetically tuned dimensional augmentation strategy add more diversity to this field. In addition, to speed up the crystallization process and create uniform crystals with reduced size, many alternative synthesis routes have been explored. Recent advances in microwave-assisted synthesis and electrochemical synthesis are presented in this review. In recent years, post-synthetic approaches have been shown to be powerful tools to synthesize MOFs with modified functionality, which cannot be attained via de novo synthesis. In this review, some current accomplishments of post-synthetic modification (PSM) based on covalent transformations and coordinative interactions as well as post-synthetic exchange (PSE) in robust MOFs are provided.

  7. Coordinative alignment of molecules in chiral metal-organic frameworks.

    PubMed

    Lee, Seungkyu; Kapustin, Eugene A; Yaghi, Omar M

    2016-08-19

    A chiral metal-organic framework, MOF-520, was used to coordinatively bind and align molecules of varying size, complexity, and functionality. The reduced motional degrees of freedom obtained with this coordinative alignment method allowed the structures of molecules to be determined by single-crystal x-ray diffraction techniques. The chirality of the MOF backbone also served as a reference in the structure solution for an unambiguous assignment of the absolute configuration of bound molecules. Sixteen molecules representing four common functional groups (primary alcohol, phenol, vicinal diol, and carboxylic acid), ranging in complexity from methanol to plant hormones (gibberellins, containing eight stereocenters), were crystallized and had their precise structure determined. We distinguished single and double bonds in gibberellins, and we enantioselectively crystallized racemic jasmonic acid, whose absolute configuration had only been inferred from derivatives.

  8. Metal-organic frameworks for membrane-based separations

    NASA Astrophysics Data System (ADS)

    Denny, Michael S.; Moreton, Jessica C.; Benz, Lauren; Cohen, Seth M.

    2016-12-01

    As research into metal-organic frameworks (MOFs) enters its third decade, efforts are naturally shifting from fundamental studies to applications, utilizing the unique features of these materials. Engineered forms of MOFs, such as membranes and films, are being investigated to transform laboratory-synthesized MOF powders to industrially viable products for separations, chemical sensors and catalysts. Following encouraging demonstrations of gas separations using MOF-based membranes, liquid-phase separations are now being explored in an effort to build effective membranes for these settings. In this Review, we highlight MOF applications that are in their nascent stages, specifically liquid-phase separations using MOF-based mixed-matrix membranes. We also highlight the analytical techniques that provide important insights into these materials, particularly at surfaces and interfaces, to better understand MOFs and their interactions with other materials, which will ultimately lead to their use in advanced technologies.

  9. Superexchange Charge Transport in Loaded Metal Organic Frameworks.

    PubMed

    Neumann, Tobias; Liu, Jianxi; Wächter, Tobias; Friederich, Pascal; Symalla, Franz; Welle, Alexander; Mugnaini, Veronica; Meded, Velimir; Zharnikov, Michael; Wöll, Christof; Wenzel, Wolfgang

    2016-07-26

    In the past, nanoporous metal-organic frameworks (MOFs) have been mostly studied for their huge potential with regard to gas storage and separation. More recently, the discovery that the electrical conductivity of a widely studied, highly insulating MOF, HKUST-1, improves dramatically when loaded with guest molecules has triggered a huge interest in the charge carrier transport properties of MOFs. The observed high conductivity, however, is difficult to reconcile with conventional transport mechanisms: neither simple hopping nor band transport models are consistent with the available experimental data. Here, we combine theoretical results and new experimental data to demonstrate that the observed conductivity can be explained by an extended hopping transport model including virtual hops through localized MOF states or molecular superexchange. Predictions of this model agree well with precise conductivity measurements, where experimental artifacts and the influence of defects are largely avoided by using well-defined samples and the Hg-drop junction approach.

  10. Recent progress in the synthesis of metal-organic frameworks.

    PubMed

    Sun, Yujia; Zhou, Hong-Cai

    2015-10-01

    Metal-organic frameworks (MOFs) have attracted considerable attention for various applications due to their tunable structure, porosity and functionality. In general, MOFs have been synthesized from isolated metal ions and organic linkers under hydrothermal or solvothermal conditions via one-spot reactions. The emerging precursor approach and kinetically tuned dimensional augmentation strategy add more diversity to this field. In addition, to speed up the crystallization process and create uniform crystals with reduced size, many alternative synthesis routes have been explored. Recent advances in microwave-assisted synthesis and electrochemical synthesis are presented in this review. In recent years, post-synthetic approaches have been shown to be powerful tools to synthesize MOFs with modified functionality, which cannot be attained via de novo synthesis. In this review, some current accomplishments of post-synthetic modification (PSM) based on covalent transformations and coordinative interactions as well as post-synthetic exchange (PSE) in robust MOFs are provided.

  11. High methane storage capacity in aluminum metal-organic frameworks.

    PubMed

    Gándara, Felipe; Furukawa, Hiroyasu; Lee, Seungkyu; Yaghi, Omar M

    2014-04-09

    The use of porous materials to store natural gas in vehicles requires large amounts of methane per unit of volume. Here we report the synthesis, crystal structure and methane adsorption properties of two new aluminum metal-organic frameworks, MOF-519 and MOF-520. Both materials exhibit permanent porosity and high methane volumetric storage capacity: MOF-519 has a volumetric capacity of 200 and 279 cm(3) cm(-3) at 298 K and 35 and 80 bar, respectively, and MOF-520 has a volumetric capacity of 162 and 231 cm(3) cm(-3) under the same conditions. Furthermore, MOF-519 exhibits an exceptional working capacity, being able to deliver a large amount of methane at pressures between 5 and 35 bar, 151 cm(3) cm(-3), and between 5 and 80 bar, 230 cm(3) cm(-3).

  12. Metal-Organic Frameworks for CO2 Chemical Transformations.

    PubMed

    He, Hongming; Perman, Jason A; Zhu, Guangshan; Ma, Shengqian

    2016-12-01

    Carbon dioxide (CO2 ), as the primary greenhouse gas in the atmosphere, triggers a series of environmental and energy related problems in the world. Therefore, there is an urgent need to develop multiple methods to capture and convert CO2 into useful chemical products, which can significantly improve the environment and promote sustainable development. Over the past several decades, metal-organic frameworks (MOFs) have shown outstanding heterogeneous catalytic activity due in part to their high internal surface area and chemical functionalities. These properties and the ability to synthesize MOF platforms allow experiments to test structure-function relationships for transforming CO2 into useful chemicals. Herein, recent developments are highlighted for MOFs participating as catalysts for the chemical fixation and photochemical reduction of CO2 . Finally, opportunities and challenges facing MOF catalysts are discussed in this ongoing research area.

  13. Synthesis and Characterization of Functionalized Metal-organic Frameworks

    PubMed Central

    Karagiaridi, Olga; Bury, Wojciech; Sarjeant, Amy A.; Hupp, Joseph T.; Farha, Omar K.

    2014-01-01

    Metal-organic frameworks have attracted extraordinary amounts of research attention, as they are attractive candidates for numerous industrial and technological applications. Their signature property is their ultrahigh porosity, which however imparts a series of challenges when it comes to both constructing them and working with them. Securing desired MOF chemical and physical functionality by linker/node assembly into a highly porous framework of choice can pose difficulties, as less porous and more thermodynamically stable congeners (e.g., other crystalline polymorphs, catenated analogues) are often preferentially obtained by conventional synthesis methods. Once the desired product is obtained, its characterization often requires specialized techniques that address complications potentially arising from, for example, guest-molecule loss or preferential orientation of microcrystallites. Finally, accessing the large voids inside the MOFs for use in applications that involve gases can be problematic, as frameworks may be subject to collapse during removal of solvent molecules (remnants of solvothermal synthesis). In this paper, we describe synthesis and characterization methods routinely utilized in our lab either to solve or circumvent these issues. The methods include solvent-assisted linker exchange, powder X-ray diffraction in capillaries, and materials activation (cavity evacuation) by supercritical CO2 drying. Finally, we provide a protocol for determining a suitable pressure region for applying the Brunauer-Emmett-Teller analysis to nitrogen isotherms, so as to estimate surface area of MOFs with good accuracy. PMID:25225784

  14. Synthesis and characterization of functionalized metal-organic frameworks.

    PubMed

    Karagiaridi, Olga; Bury, Wojciech; Sarjeant, Amy A; Hupp, Joseph T; Farha, Omar K

    2014-09-05

    Metal-organic frameworks have attracted extraordinary amounts of research attention, as they are attractive candidates for numerous industrial and technological applications. Their signature property is their ultrahigh porosity, which however imparts a series of challenges when it comes to both constructing them and working with them. Securing desired MOF chemical and physical functionality by linker/node assembly into a highly porous framework of choice can pose difficulties, as less porous and more thermodynamically stable congeners (e.g., other crystalline polymorphs, catenated analogues) are often preferentially obtained by conventional synthesis methods. Once the desired product is obtained, its characterization often requires specialized techniques that address complications potentially arising from, for example, guest-molecule loss or preferential orientation of microcrystallites. Finally, accessing the large voids inside the MOFs for use in applications that involve gases can be problematic, as frameworks may be subject to collapse during removal of solvent molecules (remnants of solvothermal synthesis). In this paper, we describe synthesis and characterization methods routinely utilized in our lab either to solve or circumvent these issues. The methods include solvent-assisted linker exchange, powder X-ray diffraction in capillaries, and materials activation (cavity evacuation) by supercritical CO2 drying. Finally, we provide a protocol for determining a suitable pressure region for applying the Brunauer-Emmett-Teller analysis to nitrogen isotherms, so as to estimate surface area of MOFs with good accuracy.

  15. A novel metal-organic framework for high storage and separation of acetylene at room temperature

    SciTech Connect

    Duan, Xing; Wang, Huizhen; Ji, Zhenguo; Cui, Yuanjing; Yang, Yu; Qian, Guodong

    2016-09-15

    A novel 3D microporous metal-organic framework with NbO topology, [Cu{sub 2}(L)(H{sub 2}O){sub 2}]∙(DMF){sub 6}·(H{sub 2}O){sub 2} (ZJU-10, ZJU = Zhejiang University; H{sub 4}L =2′-hydroxy-[1,1′:4′,1″-terphenyl]-3,3″,5,5″-tetracarboxylic acid; DMF =N,N-dimethylformamide), has been synthesized and structurally characterized. With suitable pore sizes and open Cu{sup 2+} sites, ZJU-10a exhibits high BET surface area of 2392 m{sup 2}/g, as well as moderately high C{sub 2}H{sub 2} volumetric uptake capacity of 132 cm{sup 3}/cm{sup 3}. Meanwhile, ZJU-10a is a promising porous material for separation of acetylene from methane and carbon dioxide gas mixtures at room temperature. - Graphical abstract: A new NbO-type microporous metal-organic framework ZJU-10 with suitable pore size and open Cu{sup 2+} sites was synthesized to realize the strong interaction with acetylene molecules, which can separate the acetylene from methane and carbon dioxane gas mixtures at room temperature. Display Omitted - Highlights: • A novel 3D NbO-type microporous metal-organic framework ZJU-10 was solvothermally synthesized and structurally characterized. • ZJU-10a exhibits high BET surface area of 2392 m{sup 2}/g. • ZJU-10a shows a moderately high C{sub 2}H{sub 2} gravimetric (volumetric) uptake capacity of 174 (132) cm{sup 3}/g at 298 K and 1 bar. • ZJU-10a can separate acetylene from methane and carbon dioxide gas mixtures at room temperature.

  16. Smart Metal-Organic Framework Coatings: Triggered Antibiofilm Compound Release.

    PubMed

    Claes, Birgit; Boudewijns, Tom; Muchez, Laurens; Hooyberghs, Geert; Van der Eycken, Erik V; Vanderleyden, Jozef; Steenackers, Hans P; De Vos, Dirk E

    2017-02-08

    Metal-organic frameworks (MOFs) have a large potential for delivery of active molecules. Here, a MOF coating is investigated as a smart host matrix for triggered release of antibiofilm compounds. In addition to a coating consisting of the regular Fe-terephthalate MIL-88B(Fe), a new hydrophobic MIL-88B(Fe) coating is synthesized in hydrothermal conditions using palmitic acid as a lattice terminating group. These porous materials are used as a host matrix for the antibiofilm compound 5-(4-chlorophenyl)-N-(2-isobutyl)-2-aminoimidazole, which has a specific biofilm-inhibiting effect at concentrations at which no activity against planktonic cells is detected. The stability of MIL-88B(Fe) in distilled water and tryptic soy broth medium is investigated, together with the ability of iron(III) chelators to serve as a trigger for controlled decomposition of MIL-88B(Fe) by metal complexation. Organic iron chelators are used to mimic the iron chelating function of siderophores, which are specific molecules excreted by biofilm-forming bacteria. Trisodium citrate is able to chelate metal ions from the junctions of the framework. By sequestration of these metal ions, the host matrix is partially degraded, resulting in an antibiofilm compound release. Finally, the antibiofilm properties against Salmonella Typhimurium are validated by monitoring biofilm growth on MOF layers either loaded or not with aminoimidazole. A strong proof-of-concept is shown for efficient inhibition of biofilm growth through triggered antibiofilm compound release.

  17. Metal-organic frameworks as functional, porous materials

    NASA Astrophysics Data System (ADS)

    Rood, Jeffrey A.

    The research presented in this thesis investigates the use of metal carboxylates as permanently porous materials called metal-organic frameworks (MOFs). The project has focused on three broad areas of study, each which strives to develop a further understanding of this class of materials. The first topic is concerned with the synthesis and structural characterization of MOFs. Our group and others have found that the reaction of metal salts with carboxylic acids in polar solvents at elevated temperatures often leads the formation of crystalline MOF materials that can be examined by single crystal X-ray diffraction. Specifically, Chapter 2 reports on some of the first examples of magnesium MOFs, constructed from formate or aryldicarboxylate ligands. The magnesium formate MOF, [Mg3(O2CH) 6] was found to be a permanently porous 3-D material capable of selective uptake and exchange of small molecules. Once the synthesis and structures of some of these materials was known, their physical properties were studied. The magnesium formate MOF, [Mg 3(O2CH)6], was found to be permanently porous and able to reversibly adsorb both N2 and H2 gas. Furthermore, the material was also capable of taking up a variety of organic molecules to form new inclusion compounds that were characterized by XRD studies. Size exclusion was shown for cyclohexane and larger molecules. Chapters 3, 5, and 6 attempt to build off of the synthetic findings reported in Chapter 2. Specifically, the ability of these materials to take up guest molecules is expanded by the attempted synthesis of porous, homochiral MOFs using enantiopure carboxylic acids in the synthesis. It was found that under the appropriate synthetic conditions, both L-tartaric acid and (+)-camphoric acid were robust linkers for the formation of homochiral MOFs. Of the compounds synthesized, the most interesting were the set of compounds, [Zn2(Cam) 2(bipy)⊃3DMF] and [Zn2(Cam)2(apyr)⊃2DMF]. These compounds formed isoreticular cubic

  18. Anisotropic thermal expansion in a metal-organic framework.

    PubMed

    Madsen, Solveig Røgild; Lock, Nina; Overgaard, Jacob; Iversen, Bo Brummerstedt

    2014-06-01

    Ionothermal reaction between Mn(II)(acetate)2·4H2O and 1,3,5-benzenetricarboxylic acid (H3BTC) in either of the two ionic liquids 1-ethyl-3-methylimidazolium bromide (EMIMBr) and 1-ethyl-3-methylimidazolium tosylate (EMIMOTs) resulted in the formation of the new metal-organic framework (MOF) EMIM[Mn(II)BTC] (BTC = 1,3,5-benzenetricarboxylate). The compound crystallizes in the orthorhombic space group Pbca with unit-cell parameters of a = 14.66658 (12), b = 12.39497 (9), c = 16.63509 (14) Å at 100 K. Multi-temperature single-crystal (15-340 K) and powder X-ray diffraction studies (100-400 K) reveal strongly anisotropic thermal expansion properties. The linear thermal expansion coefficients, αL(l), attain maximum values at 400 K along the a- and b-axis, with αL(a) = 115 × 10(-6) K(-1) and αL(b) = 75 × 10(-6) K(-1). At 400 K a negative thermal expansion coefficient of -40 × 10(-6) K(-1) is observed along the c-axis. The thermal expansion is coupled to a continuous deformation of the framework, which causes the structure to expand in two directions. Due to the rigidity of the linker, the expansion in the ab plane causes the network to contract along the c-axis. Hirshfeld surface analysis has been used to describe the interaction between the framework structure and the EMIM cation that resides within the channel. This reveals a number of rather weak interactions and one governing hydrogen-bonding interactions.

  19. Nanosizing a Metal-Organic Framework Enzyme Carrier for Accelerating Nerve Agent Hydrolysis

    DTIC Science & Technology

    2016-10-05

    Chem. Soc. 2016, 138 (26), 8052− 8055. (12) Furukawa, H.; Cordova, K. E.; O’Keeffe, M.; Yaghi, O. M. The Chemistry and Applications of Metal- Organic ...Y.; Xie, L.-H.; Rutledge, W.; Li, J.-R.; Zhou, H.-C. Zr-Based Metal- Organic Frameworks: Design, Synthesis, Structure, and Applications . Chem. Soc... Application of Consistency Criteria to Calculate Bet Areas of Micro- and Mesoporous Metal- Organic Frameworks. J. Am. Chem. Soc. 2016, 138 (1), 215−224. (64

  20. Energy Storage during Compression of Metal-Organic Frameworks.

    PubMed

    Miao, Yu-Run; Su, Zhi; Suslick, Kenneth S

    2017-04-05

    Practical applications of metal-organic framework (MOF) materials require an in-depth understanding of their mechanical properties. We have investigated the mechanical properties and energy absorption behavior of single crystals of four isostructural UiO-type MOFs under uniaxial compression. In situ nanocompression experiments were used to measure the mechanical behavior of individual MOF nanocrystals under compression within a transmission electron microscope. The plasticity and endothermicity during deformation of MOFs shows a surprising potential for absorption and dissipation of mechanical shock. At compressive stress below 2 GPa, relatively small amounts of energy (<0.3 kJ/g) are absorbed by the compression of these MOFs. As the stress was increased, however, the energy absorption was significantly enhanced. Above 2 GPa, the energy absorption typically reaches 3-4 kJ/g; for comparison, the energy release in the explosion of TNT is ∼4 kJ/g. Gram for gram, MOFs can absorb as much energy as a high explosive can release.

  1. Hydrogen storage by physisorption on Metal Organic Frameworks

    NASA Astrophysics Data System (ADS)

    Dailly, Anne

    2008-03-01

    Cryo-adsorption systems based on materials with high specific surface areas have the main advantage that they can store and release hydrogen with fast kinetics and high reversibility over multiples cycles. Recently Metal Organic Frameworks (MOFs) have been proposed as promising adsorbents for hydrogen. These crystallographically well organized hybrid solids resulting from the three dimensional connection of inorganic clusters using organic linkers show the largest specific surface areas of all known crystalline solids. The determination of the relationships between physical properties (chemistry, structure, surface area ) of the MOFs and their hydrogen storage behavior is a key step in the characterization of these materials, if they are to be designed for hydrogen storage applications. Excess hydrogen sorption measurements for different MOFs will be presented. We show that maximum hydrogen uptake at high pressure and 77K does not always scale with the specific surface area. A linear correlation trend only apply within a class of specific materials and breaks down when the surface area measurement does not represent the surface sites that are available to H2. The influence of pore size and shape will also be discussed by comparing several MOFs with different structure types. The hydrogen adsorption and binding energy at low pressure are strongly dependent on the metal ions and the pore size.

  2. Controlling Thermal Expansion: A Metal-Organic Frameworks Route.

    PubMed

    Balestra, Salvador R G; Bueno-Perez, Rocio; Hamad, Said; Dubbeldam, David; Ruiz-Salvador, A Rabdel; Calero, Sofia

    2016-11-22

    Controlling thermal expansion is an important, not yet resolved, and challenging problem in materials research. A conceptual design is introduced here, for the first time, for the use of metal-organic frameworks (MOFs) as platforms for controlling thermal expansion devices that can operate in the negative, zero, and positive expansion regimes. A detailed computer simulation study, based on molecular dynamics, is presented to support the targeted application. MOF-5 has been selected as model material, along with three molecules of similar size and known differences in terms of the nature of host-guest interactions. It has been shown that adsorbate molecules can control, in a colligative way, the thermal expansion of the solid, so that changing the adsorbate molecules induces the solid to display positive, zero, or negative thermal expansion. We analyze in depth the distortion mechanisms, beyond the ligand metal junction, to cover the ligand distortions, and the energetic and entropic effect on the thermo-structural behavior. We provide an unprecedented atomistic insight on the effect of adsorbates on the thermal expansion of MOFs as a basic tool toward controlling the thermal expansion.

  3. Recent Advances in Carbon Capture with Metal-Organic Frameworks.

    PubMed

    Stylianou, Kyriakos C; Queen, Wendy L

    2015-01-01

    The escalating level of CO(2) in the atmosphere is one of the most critical environmental issues of our age. The carbon capture and storage from pilot test plants represents an option for reducing CO(2) emissions, however, the energy cost associated with post-combustion carbon capture process alone is ∼30% of the total energy generated by the power plant. Thus, the generation of carbon capture adsorbents with high uptake capacities, great separation performance and low cost is of paramount importance. Metal-organic frameworks are infinite networks of metal-containing nodes bridged by organic ligands through coordination bonds into porous extended structures and several reports have revealed that they are ideal candidates for the selective capture of CO(2). In this review we summarize recent advances related to the synthesis of porous MOFs and the latest strategies to enhance the CO(2) adsorption enthalpies and capacities at low-pressures, increase hydrolytic and mechanical stabilities, and improve the ease of regeneration. Although they show great promise for post-combustion carbon capture, there are still major challenges that must be overcome before they can be used for such a large-scale application.

  4. Metal-organic frameworks for lithium ion batteries and supercapacitors

    SciTech Connect

    Ke, Fu-Sheng; Wu, Yu-Shan; Deng, Hexiang

    2015-03-15

    Porous materials have been widely used in batteries and supercapacitors attribute to their large internal surface area (usually 100–1000 m{sup 2} g{sup −1}) and porosity that can favor the electrochemical reaction, interfacial charge transport, and provide short diffusion paths for ions. As a new type of porous crystalline materials, metal-organic frameworks (MOFs) have received huge attention in the past decade due to their unique properties, i.e. huge surface area (up to 7000 m{sup 2} g{sup −1}), high porosity, low density, controllable structure and tunable pore size. A wide range of applications including gas separation, storage, catalysis, and drug delivery benefit from the recent fast development of MOFs. However, their potential in electrochemical energy storage has not been fully revealed. Herein, the present mini review appraises recent and significant development of MOFs and MOF-derived materials for rechargeable lithium ion batteries and supercapacitors, to give a glimpse into these potential applications of MOFs. - Graphical abstract: MOFs with large surface area and high porosity can offer more reaction sites and charge carriers diffusion path. Thus MOFs are used as cathode, anode, electrolyte, matrix and precursor materials for lithium ion battery, and also as electrode and precursor materials for supercapacitors. - Highlights: • MOFs have potential in electrochemical area due to their high porosity and diversity. • We summarized and compared works on MOFs for lithium ion battery and supercapacitor. • We pointed out critical challenges and provided possible solutions for future study.

  5. Destruction of chemical warfare agents using metal-organic frameworks

    NASA Astrophysics Data System (ADS)

    Mondloch, Joseph E.; Katz, Michael J.; Isley, William C., III; Ghosh, Pritha; Liao, Peilin; Bury, Wojciech; Wagner, George W.; Hall, Morgan G.; Decoste, Jared B.; Peterson, Gregory W.; Snurr, Randall Q.; Cramer, Christopher J.; Hupp, Joseph T.; Farha, Omar K.

    2015-05-01

    Chemical warfare agents containing phosphonate ester bonds are among the most toxic chemicals known to mankind. Recent global military events, such as the conflict and disarmament in Syria, have brought into focus the need to find effective strategies for the rapid destruction of these banned chemicals. Solutions are needed for immediate personal protection (for example, the filtration and catalytic destruction of airborne versions of agents), bulk destruction of chemical weapon stockpiles, protection (via coating) of clothing, equipment and buildings, and containment of agent spills. Solid heterogeneous materials such as modified activated carbon or metal oxides exhibit many desirable characteristics for the destruction of chemical warfare agents. However, low sorptive capacities, low effective active site loadings, deactivation of the active site, slow degradation kinetics, and/or a lack of tailorability offer significant room for improvement in these materials. Here, we report a carefully chosen metal-organic framework (MOF) material featuring high porosity and exceptional chemical stability that is extraordinarily effective for the degradation of nerve agents and their simulants. Experimental and computational evidence points to Lewis-acidic ZrIV ions as the active sites and to their superb accessibility as a defining element of their efficacy.

  6. Destruction of chemical warfare agents using metal-organic frameworks.

    PubMed

    Mondloch, Joseph E; Katz, Michael J; Isley, William C; Ghosh, Pritha; Liao, Peilin; Bury, Wojciech; Wagner, George W; Hall, Morgan G; DeCoste, Jared B; Peterson, Gregory W; Snurr, Randall Q; Cramer, Christopher J; Hupp, Joseph T; Farha, Omar K

    2015-05-01

    Chemical warfare agents containing phosphonate ester bonds are among the most toxic chemicals known to mankind. Recent global military events, such as the conflict and disarmament in Syria, have brought into focus the need to find effective strategies for the rapid destruction of these banned chemicals. Solutions are needed for immediate personal protection (for example, the filtration and catalytic destruction of airborne versions of agents), bulk destruction of chemical weapon stockpiles, protection (via coating) of clothing, equipment and buildings, and containment of agent spills. Solid heterogeneous materials such as modified activated carbon or metal oxides exhibit many desirable characteristics for the destruction of chemical warfare agents. However, low sorptive capacities, low effective active site loadings, deactivation of the active site, slow degradation kinetics, and/or a lack of tailorability offer significant room for improvement in these materials. Here, we report a carefully chosen metal-organic framework (MOF) material featuring high porosity and exceptional chemical stability that is extraordinarily effective for the degradation of nerve agents and their simulants. Experimental and computational evidence points to Lewis-acidic Zr(IV) ions as the active sites and to their superb accessibility as a defining element of their efficacy.

  7. Metal-organic framework composites: from fundamentals to applications

    NASA Astrophysics Data System (ADS)

    Li, Shaozhou; Huo, Fengwei

    2015-04-01

    Metal-organic frameworks (MOFs) are a class of crystallized porous polymeric materials consisting of metal ions or clusters linked together by organic bridging ligands. Due to their permanent porosity, rich surface chemistry and tuneable pore sizes, MOFs have emerged as one type of important porous solid and have attracted intensive interests in catalysis, gas adsorption, separation and storage over the past two decades. When compared with pure MOFs, the combination of MOFs with functional species or matrix materials not only shows enhanced properties, but also broadens the applications of MOFs in new fields, such as bio-imaging, drug delivery and electrical catalysis, owing to the interactions of the functional species/matrix with the MOF structures. Although the synthesis, chemical modification and potential applications of MOFs have been reviewed previously, there is an increasing awareness on the synthesis and applications of their composites, which have rarely been reviewed. This review aims to fill this gap and discuss the fabrication, properties, and applications of MOF composites. The remaining challenges and future opportunities in this field, in terms of processing techniques, maximizing composite properties, and prospects for applications, have also been indicated.

  8. CO2-Selective Nanoporous Metal-Organic Framework Microcantilevers

    PubMed Central

    Yim, Changyong; Lee, Moonchan; Yun, Minhyuk; Kim, Gook-Hee; Kim, Kyong Tae; Jeon, Sangmin

    2015-01-01

    Nanoporous anodic aluminum oxide (AAO) microcantilevers are fabricated and MIL-53 (Al) metal-organic framework (MOF) layers are directly synthesized on each cantilever surface by using the aluminum oxide as the metal ion source. Exposure of the MIL53-AAO cantilevers to various concentrations of CO2, N2, CO, and Ar induces changes in their deflections and resonance frequencies. The results of the resonance frequency measurements for the different adsorbed gas molecules are almost identical when the frequency changes are normalized by the molecular weights of the gases. In contrast, the deflection measurements show that only CO2 adsorption induces substantial bending of the MIL53-AAO cantilevers. This selective deflection of the cantilevers is attributed to the strong interactions between CO2 and the hydroxyl groups in MIL-53, which induce structural changes in the MIL-53 layers. Simultaneous measurements of the resonance frequency and the deflection are performed to show that the diffusion of CO2 into the nanoporous MIL-53 layers occurs very rapidly, whereas the binding of CO2 to hydroxyl groups occurs relatively slowly, which indicates that the adsorption of CO2 onto the MIL-53 layers and the desorption of CO2 from the MIL-53 layers are reaction limited. PMID:26035805

  9. Synthesis, structure and photoluminescent behavior of a novel pillar-layered {Zn3}-based metal-organic framework

    NASA Astrophysics Data System (ADS)

    Song, Xue-Zhi; Mu, Wen-Sheng; Han, Bing-Yan; Yan, Yang

    2016-09-01

    A novel 3D metal-organic framework (MOF) {[Zn3(bpdc)3 (p-4-bpmb)](DMF)2}n ( 1) (H2bpdc=biphenyl-4,4‧-dicarboxylic acid; p-4-bpmb=1,4-bis(pyridine-4-ylmethoxy)benzene) has been solvothermally synthesized and structurally characterized. Compound 1 exhibits a 3D pillar-layered framework based on the trinuclear {Zn3} building blocks, consisting of Zn-dicarboxylate layers and bipyridyl-derivative pillars. Furthermore, it features three-fold interpenetrating 8-connected hex-type topology. In addition, its thermal stability and luminescent property have also been investigated.

  10. Peptide Metal-Organic Frameworks for Enantioselective Separation of Chiral Drugs.

    PubMed

    Navarro-Sánchez, José; Argente-García, Ana I; Moliner-Martínez, Yolanda; Roca-Sanjuán, Daniel; Antypov, Dmytro; Campíns-Falcó, Pilar; Rosseinsky, Matthew J; Martí-Gastaldo, Carlos

    2017-03-29

    We report the use of a chiral Cu(II) 3D metal-organic framework (MOF) based on the tripeptide Gly-l-His-Gly (GHG) for the enantioselective separation of metamphetamine and ephedrine. Monte Carlo simulations suggest that chiral recognition is linked to preferential binding of one of the enantiomers as a result of either stronger or additional H-bonds with the framework that lead to energetically more stable diastereomeric adducts. Solid-phase extraction of a racemic mixture by using Cu(GHG) as the extractive phase permits isolating >50% of the (+)-ephedrine enantiomer as target compound in only 4 min. To our knowledge, this represents the first example of a MOF capable of separating chiral polar drugs.

  11. Pore Space Partition in Metal-Organic Frameworks.

    PubMed

    Zhai, Quan-Guo; Bu, Xianhui; Zhao, Xiang; Li, Dong-Sheng; Feng, Pingyun

    2017-02-21

    Metal-organic framework (MOF) materials have emerged as one of the favorite crystalline porous materials (CPM) because of their compositional and geometric tunability and many possible applications. In efforts to develop better MOFs for gas storage and separation, a number of strategies including creation of open metal sites and implantation of Lewis base sites have been used to tune host-guest interactions. In addition to these chemical factors, the geometric features such as pore size and shape, surface area, and pore volume also play important roles in sorption energetics and uptake capacity. For efficient capture of small gas molecules such as carbon dioxide under ambient conditions, large surface area or high pore volume are often not needed. Instead, maximizing host-guest interactions or the density of binding sites by encaging gas molecules in snug pockets of pore space can be a fruitful approach. To put this concept into practice, the pore space partition (PSP) concept has been proposed and has achieved a great experimental success. In this account, we will highlight many efforts to implement PSP in MOFs and impact of PSP on gas uptake performance. In the synthetic design of PSP, it is helpful to distinguish between factors that contribute to the framework formation and factors that serve the purpose of PSP. Because of the need for complementary structural roles, the synthesis of MOFs with PSP often involves multicomponent systems including mixed ligands, mixed inorganic nodes, or both. It is possible to accomplish both framework formation and PSP with a single type of polyfunctional ligands that use some functional groups (called framework-forming group) for framework formation and the remaining functional groups (called pore-partition group) for PSP. Alternatively, framework formation and PSP can be shouldered by different chemical species. For example, in a mixed-ligand system, one ligand (called framework-forming agent) can play the role of the

  12. Multiphoton absorption in graphene and metal-organic frameworks

    NASA Astrophysics Data System (ADS)

    Weiqiang, Chen

    Materials possessing large multiphoton absorption are of direct relevance to both photonics applications and materials physics. In this dissertation, we present our investigations into two novel materials: namely, (1) graphene and (2) metal-organic frameworks (MOFs). The dissertation divides into two parts. The first part of the dissertation reports our systematical Z-scan measurements onto two-photon absorption (2PA) in graphene in the spectral range of 435-1100 nm with femtosecond laser pulses. We report that the measured 2PA coefficients of graphene in the near-infrared (NIR) range of 800-1100 nm can be explained by a theoretical model based on the optical transitions near the Dirac point (K point). We also determine the 2PA coefficients of graphene in the visible spectrum (435-700 nm) and observe an enhancement induced by the excitonic Fano resonance at the saddle point (M point). By applying the second-order, time-dependent perturbation theory on interband transitions among three states near the saddle point, we develop a semi-empirical model to take excitons in graphene into consideration. And the model is in agreement with the photon-energy dependence of the observed 2PA spectrum with a scaling factor of B = (1 5) x 102 cm/MW/eV5. Our results verify, for the first time, that the excitonic Fano resonance plays an important role for the 2PA of graphene in the visible spectrum. Besides, we also detail our measurements on the spectral dependence of one-photon absorption (1PA) saturation in graphene over the visible-NIR range. A quadratic photon energy dependence of the measured saturation intensity/fluence is observed over the investigated spectral range. The underlying photo-dynamics is discussed. In the second part of the dissertation, we investigate multiphoton excited photoluminescence (MEPL) from three solid-state crystals of metal-organic frameworks (MOFs): (1) [Zn2(trans,trans-4,4 stilbenedicarboxylic acid (SDC))2(trans, trans-9, 10-bis (4-pyridylethenyl

  13. Investigation of metal hydride nanoparticles templated in metal organic frameworks.

    SciTech Connect

    Jacobs, Benjamin W.; Herberg, Julie L.; Highley, Aaron M.; Grossman, Jeffrey; Wagner, Lucas; Bhakta, Raghu; Peaslee, D.; Allendorf, Mark D.; Liu, X.; Behrens, Richard, Jr.; Majzoub, Eric H.

    2010-11-01

    Hydrogen is proposed as an ideal carrier for storage, transport, and conversion of energy. However, its storage is a key problem in the development of hydrogen economy. Metal hydrides hold promise in effectively storing hydrogen. For this reason, metal hydrides have been the focus of intensive research. The chemical bonds in light metal hydrides are predominantly covalent, polar covalent or ionic. These bonds are often strong, resulting in high thermodynamic stability and low equilibrium hydrogen pressures. In addition, the directionality of the covalent/ionic bonds in these systems leads to large activation barriers for atomic motion, resulting in slow hydrogen sorption kinetics and limited reversibility. One method for enhancing reaction kinetics is to reduce the size of the metal hydrides to nano scale. This method exploits the short diffusion distances and constrained environment that exist in nanoscale hydride materials. In order to reduce the particle size of metal hydrides, mechanical ball milling is widely used. However, microscopic mechanisms responsible for the changes in kinetics resulting from ball milling are still being investigated. The objective of this work is to use metal organic frameworks (MOFs) as templates for the synthesis of nano-scale NaAlH4 particles, to measure the H2 desorption kinetics and thermodynamics, and to determine quantitative differences from corresponding bulk properties. Metal-organic frameworks (MOFs) offer an attractive alternative to traditional scaffolds because their ordered crystalline lattice provides a highly controlled and understandable environment. The present work demonstrates that MOFs are stable hosts for metal hydrides and their reactive precursors and that they can be used as templates to form metal hydride nanoclusters on the scale of their pores (1-2 nm). We find that using the MOF HKUST-1 as template, NaAlH4 nanoclusters as small as 8 formula units can be synthesized inside the pores. A detailed picture of

  14. Metal-adeninate vertices for the construction of an exceptionally porous metal-organic framework.

    PubMed

    An, Jihyun; Farha, Omar K; Hupp, Joseph T; Pohl, Ehmke; Yeh, Joanne I; Rosi, Nathaniel L

    2012-01-03

    Metal-organic frameworks comprising metal-carboxylate cluster vertices and long, branched organic linkers are the most porous materials known, and therefore have attracted tremendous attention for many applications, including gas storage, separations, catalysis and drug delivery. To increase metal-organic framework porosity, the size and complexity of linkers has increased. Here we present a promising alternative strategy for constructing mesoporous metal-organic frameworks that addresses the size of the vertex rather than the length of the organic linker. This approach uses large metal-biomolecule clusters, in particular zinc-adeninate building units, as vertices to construct bio-MOF-100, an exclusively mesoporous metal-organic framework. Bio-MOF-100 exhibits a high surface area (4,300 m(2) g(-1)), one of the lowest crystal densities (0.302 g cm(-3)) and the largest metal-organic framework pore volume reported to date (4.3 cm(3) g(-1)).

  15. Oriented Nano-Microstructure-Assisted Controllable Fabrication of Metal-Organic Framework Membranes on Nickel Foam.

    PubMed

    Sun, Yuxiu; Yang, Fan; Wei, Qi; Wang, Naixin; Qin, Xi; Zhang, Shaokang; Wang, Bin; Nie, Zuoren; Ji, Shulan; Yan, Hui; Li, Jian-Rong

    2016-03-23

    Oriented nano-microstructure-assisted controllable fabrication, a facile and versatile preparation strategy, is developed to fabricate metal-organic framework (MOF) membranes. With this method, several MOF membranes with tailored structures are prepared, including HKUST-1 (with 3D pores) and M3 (HCOO)6 (with 1D pores; M = Co, Mn, and Mg) membranes, which demonstrate good performances in gas separations.

  16. Metal-organic frameworks as selectivity regulators for hydrogenation reactions

    NASA Astrophysics Data System (ADS)

    Zhao, Meiting; Yuan, Kuo; Wang, Yun; Li, Guodong; Guo, Jun; Gu, Lin; Hu, Wenping; Zhao, Huijun; Tang, Zhiyong

    2016-11-01

    Owing to the limited availability of natural sources, the widespread demand of the flavouring, perfume and pharmaceutical industries for unsaturated alcohols is met by producing them from α,β-unsaturated aldehydes, through the selective hydrogenation of the carbon-oxygen group (in preference to the carbon-carbon group). However, developing effective catalysts for this transformation is challenging, because hydrogenation of the carbon-carbon group is thermodynamically favoured. This difficulty is particularly relevant for one major category of heterogeneous catalyst: metal nanoparticles supported on metal oxides. These systems are generally incapable of significantly enhancing the selectivity towards thermodynamically unfavoured reactions, because only the edges of nanoparticles that are in direct contact with the metal-oxide support possess selective catalytic properties; most of the exposed nanoparticle surfaces do not. This has inspired the use of metal-organic frameworks (MOFs) to encapsulate metal nanoparticles within their layers or inside their channels, to influence the activity of the entire nanoparticle surface while maintaining efficient reactant and product transport owing to the porous nature of the material. Here we show that MOFs can also serve as effective selectivity regulators for the hydrogenation of α,β-unsaturated aldehydes. Sandwiching platinum nanoparticles between an inner core and an outer shell composed of an MOF with metal nodes of Fe3+, Cr3+ or both (known as MIL-101; refs 19, 20, 21) results in stable catalysts that convert a range of α,β-unsaturated aldehydes with high efficiency and with significantly enhanced selectivity towards unsaturated alcohols. Calculations reveal that preferential interaction of MOF metal sites with the carbon-oxygen rather than the carbon-carbon group renders hydrogenation of the former by the embedded platinum nanoparticles a thermodynamically favoured reaction. We anticipate that our basic design

  17. The Importance of Polymorphism in Metal-Organic Framework Studies.

    PubMed

    Aulakh, Darpandeep; Varghese, Juby R; Wriedt, Mario

    2015-09-08

    Polymorphic phase transitions remain frequently undetected in routine metal-organic framework (MOF) studies; however, their discovery is of major importance in interpreting structure-property relationships. We herein report a reversible enantiotropic single-crystal to single-crystal polymorphic phase transition of a new microporous MOF [Eu(BDC)(NO3)(DMF)2]n (H2BDC = 1,4-benzenedicarboxylic acid; DMF = dimethylformamide). While modification 1LT at 170 K crystallizes in the monoclinic space group P21/c with unit cell dimensions of a = 17.673(2) Å, b = 20.023(2) Å, c = 10.555(9) Å, β = 90.129(4)°, modification 1HT at 290 K crystallizes in higher symmetry space group C2/c with unit cell dimensions of a = 17.200(7) Å, b = 10.737(4) Å, c = 10.684(4) Å, β = 90.136(2)°. This temperature-induced phase transition is accompanied by a small change in the solvent-accessible voids from 46.8 in 1LT to 49.8% in 1HT, which triggers a significant change in the adsorption properties as compared to a reported isostructural compound. Detailed investigations on the phase transition were studied with variable-temperature single-crystal X-ray diffraction (SCXRD), powder X-ray diffraction, and differential scanning calorimetry measurements. The herein-presented investigations emphasize the importance of polymorphic phase transitions in routine MOF studies originating from low-temperature SCXRD data and high-temperature physical property characterizations in avoiding the use of a wrong structure in interpreting structure-property relationships.

  18. High-internal-phase emulsions stabilized by metal-organic frameworks and derivation of ultralight metal-organic aerogels

    PubMed Central

    Zhang, Bingxing; Zhang, Jianling; Liu, Chengcheng; Peng, Li; Sang, Xinxin; Han, Buxing; Ma, Xue; Luo, Tian; Tan, Xiuniang; Yang, Guanying

    2016-01-01

    To design high-internal-phase emulsion (HIPE) systems is of great interest from the viewpoints of both fundamental researches and practical applications. Here we demonstrate for the first time the utilization of metal-organic framework (MOF) for HIPE formation. By stirring the mixture of water, oil and MOF at room temperature, the HIPE stabilized by the assembly of MOF nanocrystals at oil-water interface could be formed. The MOF-stabilized HIPE provides a novel route to produce highly porous metal-organic aerogel (MOA) monolith. After removing the liquids from the MOF-stabilized HIPE, the ultralight MOA with density as low as 0.01 g·cm−3 was obtained. The HIPE approach for MOA formation has unique advantages and is versatile in producing different kinds of ultralight MOAs with tunable porosities and structures. PMID:26892258

  19. Structural and property studies on metal-organic compounds with 3-D supramolecular network

    NASA Astrophysics Data System (ADS)

    Zhang, Qi-Ying; Ma, Ke-Fang; Xiao, Hong-Ping; Li, Xin-Hua; Shi, Qian

    2014-07-01

    Two carboxylato-bridged allomeric compounds, {[Cu2(dbsa)2(hmt) (H2O)4]1/2·2H2O}n (1), {[Ni(dbsa)(H2O)2]1/2[Ni(dbsa)(hmt)(H2O)2]1/2·2H2O}n (2) (H2dbsa=meso-2,3-dibromosuccinic acid, hmt=hexamethylenetetramine) have been synthesized and characterized by X-ray structral analyses. The metal ions have two kinds of coordination fashion in one unit, and bridged by carboxylate and hmt ligands along with weak interactions existing in the solid structure, forming a 3-D supramolecular network. Variable-temperature magnetic property studies reveal the existence of antiferromagnetic interactions in 1 and 2 with g=2.2, J1=-3.5 cm-1, J2=-2.8 cm-1 for 1, and g=2.1, J=-3.5 cm-1 for 2.

  20. A novel metal-organic framework for high storage and separation of acetylene at room temperature

    NASA Astrophysics Data System (ADS)

    Duan, Xing; Wang, Huizhen; Ji, Zhenguo; Cui, Yuanjing; Yang, Yu; Qian, Guodong

    2016-09-01

    A novel 3D microporous metal-organic framework with NbO topology, [Cu2(L)(H2O)2]•(DMF)6·(H2O)2 (ZJU-10, ZJU = Zhejiang University; H4L =2‧-hydroxy-[1,1‧:4‧,1″-terphenyl]-3,3″,5,5″-tetracarboxylic acid; DMF =N,N-dimethylformamide), has been synthesized and structurally characterized. With suitable pore sizes and open Cu2+ sites, ZJU-10a exhibits high BET surface area of 2392 m2/g, as well as moderately high C2H2 volumetric uptake capacity of 132 cm3/cm3. Meanwhile, ZJU-10a is a promising porous material for separation of acetylene from methane and carbon dioxide gas mixtures at room temperature.

  1. Condensation of Methane in the Metal-Organic Framework IRMOF-1: Evidence for Two Critical Points.

    PubMed

    Höft, Nicolas; Horbach, Jürgen

    2015-08-19

    Extensive grand canonical Monte Carlo simulations in combination with successive umbrella sampling are used to investigate the condensation of methane in the nanoporous crystalline material IRMOF-1. Two different types of novel condensation transitions are found, each of them ending in a critical point: (i) a fluid-fluid transition at higher densities (the analog of the liquid-gas transition in the bulk) and (ii) a phase transition at low densities on the surface of the IRMOF-1 structure. The nature of these transitions is different from the usual capillary condensation in thin films and cylindrical pores where the coexisting phases are confined in one or two of the three spatial dimensions. In contrast to that, in IRMOF-1 the different phases can be described as bulk phases that are inhomogeneous due to the presence of the metal-organic framework. As a consequence, the condensation transitions in IRMOF-1 belong to the three-dimensional (3D) Ising universality class.

  2. Methods for associating or dissociating guest materials with a metal organic framework, systems for associating or dissociating guest materials within a series of metal organic frameworks, thermal energy transfer assemblies, and methods for transferring thermal energy

    DOEpatents

    McGrail, B. Peter; Brown, Daryl R.; Thallapally, Praveen K.

    2016-08-02

    Methods for releasing associated guest materials from a metal organic framework are provided. Methods for associating guest materials with a metal organic framework are also provided. Methods are provided for selectively associating or dissociating guest materials with a metal organic framework. Systems for associating or dissociating guest materials within a series of metal organic frameworks are provided. Thermal energy transfer assemblies are provided. Methods for transferring thermal energy are also provided.

  3. Methods for associating or dissociating guest materials with a metal organic framework, systems for associating or dissociating guest materials within a series of metal organic frameworks, thermal energy transfer assemblies, and methods for transferring thermal energy

    DOEpatents

    McGrail, B. Peter; Brown, Daryl R.; Thallapally, Praveen K.

    2014-08-05

    Methods for releasing associated guest materials from a metal organic framework are provided. Methods for associating guest materials with a metal organic framework are also provided. Methods are provided for selectively associating or dissociating guest materials with a metal organic framework. Systems for associating or dissociating guest materials within a series of metal organic frameworks are provided. Thermal energy transfer assemblies are provided. Methods for transferring thermal energy are also provided.

  4. Metal-organic frameworks as competitive materials for non-linear optics.

    PubMed

    Mingabudinova, L R; Vinogradov, V V; Milichko, V A; Hey-Hawkins, E; Vinogradov, A V

    2016-09-26

    The last five years have witnessed a huge breakthrough in the creation and the study of the properties of a new class of compounds - metamaterials. The next stage of this technological revolution will be the development of active, controllable, and non-linear metamaterials, surpassing natural media as platforms for optical data processing and quantum information applications. However, scientists are constantly faced with the need to find new methods that can ensure the formation of quantum and non-linear metamaterials with higher resolution. One such method of producing metamaterials in the future, which will provide scalability and availability, is chemical synthesis. Meanwhile, the chemical synthesis of organized 3D structures with a period of a few nanometers and a size of up to a few millimeters is not an easy task and is yet to be resolved. The most promising avenue seems to be the use of highly porous structures based on metal-organic frameworks that have demonstrated their unique properties in the field of non-linear optics (NLO) over the past three years. Thus, the aim of this review is to examine current progress and the possibilities of using metal-organic frameworks in the field of non-linear optics as chemically obtained metamaterials of the future. The review begins by presenting the theoretical principles of physical phenomena represented by mathematical descriptions for clarity. Major attention is paid to the second harmonic generation (SHG) effect. In this section we compare inorganic single crystals, which are most commonly used to study the effect in question, to organic materials, which also possess the required properties. Based on these data, we present a rationale for the possibility of studying the non-linear optical properties of metal-organic structures as well as describing the use of synthetic approaches and the difficulties associated with them. The second part of the review explicitly acquaints the reader with a new class of materials

  5. Reaction Engineering with Metal-Organic Framework Catalysts

    NASA Astrophysics Data System (ADS)

    Melkonian, Arek Viken

    To date, there has been no comprehensive attempt to perform and/or describe catalytic reactions in the gas phase that utilize metal-organic frameworks (MOFs) as catalysts. In addition, there has been no attempt to reaction engineer these MOF catalysts in order to determine their regimes of optimal catalytic activity and possible limitations to their use. A zinc-based MOF that has been post-synthetically modified with a homogeneous palladium catalyst, Pd(CH 3CN)2Cl2, is used to catalyze the hydrogenation of propylene. The catalyst is assembled in a packed-bed reactor under a continuous flow of reactants. The reaction is optimized with respect to isoreticular metalation, reactant flow rate, and reactor temperature. Maximum catalytic conversion is found at intermediate metalations of 40% and 60%, high hydrogen flow of 50 ccm, and intermediate reactor temperatures of 100 °C and 150 °C. The MOF-60 catalyst is exposed to a traditional catalyst poison, carbon monoxide (CO). It is found that the MOF is reversibly poisoned upon introduction of CO. Upon poisoning, catalytic conversions rates of 90%-100% are dramatically reduced to less than 10%-30%, depending on the CO flow rate and the reactor temperature. The CO poisoning is shown to be reversible, a similar effect as found with palladium on carbon (Pd/C). The time scale of poisoning and recovery is very fast for both the MOF catalyst and Pd/C (approximately 10-30 seconds). Other effects of temperature on the MOF-40 are also investigated. At fixed reactant flow, the temperature grid is partitioned into finer steps of 10 °C to determine the temperature that yields the highest catalytic conversion. It is found that conversion is nearly uniform in the range between the highest conversions, i.e., conversion plateaus between the optimum temperatures. The catalyst also exhibits a weak thermal hysteresis. There is no significant improvement in conversion with thermal cycling after alternating the reactor temperature between

  6. Metal-organic frameworks based on uranyl and phosphonate ligands.

    PubMed

    Monteiro, Bernardo; Fernandes, José A; Pereira, Cláudia C L; Vilela, Sérgio M F; Tomé, João P C; Marçalo, Joaquim; Almeida Paz, Filipe A

    2014-02-01

    Three new crystalline metal-organic frameworks have been prepared from the reaction of uranyl nitrate with nitrilotris(methylphosphonic acid) [H6nmp, N(CH2PO3H2)3], 1,4-phenylenebis(methylene)diphosphonic acid [H4pmd, C6H4(PO3H2)2], and (benzene-1,3,5-triyltris(methylene))triphosphonic acid [H6bmt, C6H3(PO3H2)3]. Compound [(UO2)2F(H3nmp)(H2O)]·4H2O (I) crystallizes in space group C2/c, showing two crystallographically independent uranyl centres with pentagonal bipyramidal coordination geometries. While one metal centre is composed of a {(UO2)O3(μ-F)}2 dimer, the other comprises an isolated {(UO2)O5} polyhedron. Compound [(UO2)(H2pmd)] (II) crystallizes in space group P21/c, showing a centrosymmetric uranyl centre with an octahedral {(UO2)O4} coordination geometry. Compound [(UO2)3(H3bmt)2(H2O)2]·14H2O (III) crystallizes in space group P\\bar 1, showing two crystallographically independent uranyl centres. One uranyl centre is a {(UO2)O5} pentagonal bipyramid similar to that in (I), while the other is a {(UO2)O4} centrosymmetric octahedron similar to that in (II). Compounds (I) and (III) contain solvent-accessible volumes accounting for ca 23.6 and 26.9% of their unit-cell volume, respectively. In (I) the cavity has a columnar shape and is occupied by disordered water molecules, while in (III) the cavity is a two-dimensional layer with more ordered water molecules. All compounds have been studied in the solid state using FT-IR spectroscopy. Topological studies show that compounds (I) and (III) are trinodal, with 3,6,6- and 4,4,6-connected networks, respectively. Compound (II) is instead a 4-connected uninodal network of the type cds.

  7. Postsynthetic Tuning of Metal-Organic Frameworks for Targeted Applications.

    PubMed

    Islamoglu, Timur; Goswami, Subhadip; Li, Zhanyong; Howarth, Ashlee J; Farha, Omar K; Hupp, Joseph T

    2017-02-08

    Metal-organic frameworks (MOFs) are periodic, hybrid, atomically well-defined porous materials that typically form by self-assembly and consist of inorganic nodes (metal ions or clusters) and multitopic organic linkers. MOFs as a whole offer many intriguing properties, including ultrahigh porosity, tunable chemical functionality, and low density. These properties point to numerous potential applications, including gas storage, chemical separations, catalysis, light harvesting, and chemical sensing, to name a few. Reticular chemistry, or the linking of molecular building blocks into predetermined network structures, has been employed to synthesize thousands of MOFs. Given the vast library of candidate nodes and linkers, the number of potentially synthetically accessible MOFs is enormous. Nevertheless, a powerful complementary approach to obtain specific structures with desired chemical functionality is to modify known MOFs after synthesis. This approach is particularly useful when incorporation of particular chemical functionalities via direct synthesis is challenging or impossible. The challenges may stem from limited stability or solubility of precursors, unwanted secondary reactivity of precursors, or incompatibility of functional groups with the conditions needed for direct synthesis. MOFs can be postsynthetically modified by replacing the metal nodes and/or organic linkers or via functionalization of the metal nodes and/or organic linkers. Here we describe some of our efforts toward the development and application of postsynthetic strategies for imparting desired chemical functionalities in MOFs of known topology. The techniques include methods for functionalizing MOF nodes, i.e., solvent-assisted ligand incorporation (SALI) and atomic layer deposition in MOFs (AIM) as well as a method to replace structural linkers, termed solvent-assisted linker exchange (SALE), also known as postsynthethic exchange (PSE). For each functionalization strategy, we first describe

  8. Carbon Dioxide Separation with Novel Microporous Metal Organic Frameworks

    SciTech Connect

    Richard Willis; Annabelle Benin; John Low; Ganesh Venimadhavan; Syed Faheem; David Lesch; Adam Matzger; Randy Snurr

    2008-02-04

    The goal of this program was to develop a low cost novel sorbent to remove carbon dioxide from flue gas and gasification streams in electric utilities. Porous materials named metal-organic frameworks (MOFs) were found to have good capacity and selectivity for the capture of carbon dioxide. Several materials from the initial set of reference MOFs showed extremely high CO{sub 2} adsorption capacities and very desirable linear isotherm shapes. Sample preparation occurred at a high level, with a new family of materials suitable for intellectual property protection prepared and characterized. Raman spectroscopy was shown to be useful for the facile characterization of MOF materials during adsorption and especially, desorption. Further, the development of a Raman spectroscopic-based method of determining binary adsorption isotherms was initiated. It was discovered that a stronger base functionality will need to be added to MOF linkers in order to enhance CO{sub 2} selectivity over other gases via a chemisorption mechanism. A concentrated effort was expended on being able to accurately predict CO{sub 2} selectivities and on the calculation of predicted MOF surface area values from first principles. A method of modeling hydrolysis on MOF materials that correlates with experimental data was developed and refined. Complimentary experimental data were recorded via utilization of a combinatorial chemistry heat treatment unit and high-throughput X-ray diffractometer. The three main Deliverables for the project, namely (a) a MOF for pre-combustion (e.g., IGCC) CO{sub 2} capture, (b) a MOF for post-combustion (flue gas) CO{sub 2} capture, and (c) an assessment of commercial potential for a MOF in the IGCC application, were completed. The key properties for MOFs to work in this application - high CO{sub 2} capacity, good adsorption/desorption rates, high adsorption selectivity for CO{sub 2} over other gases such as methane and nitrogen, high stability to contaminants, namely

  9. Rapidly assessing the activation conditions and porosity of metal-organic frameworks using thermogravimetric analysis

    SciTech Connect

    McDonald, TM; Bloch, ED; Long, JR

    2015-01-01

    A methodology utilizing a thermogravimetric analyzer to monitor propane uptake following incremental increases of the temperature is demonstrated as a means of rapidly identifying porous materials and determining the optimum activation conditions of metal-organic frameworks.

  10. Kinetically tuned dimensional augmentation as a versatile synthetic route towards robust metal-organic frameworks.

    PubMed

    Feng, Dawei; Wang, Kecheng; Wei, Zhangwen; Chen, Ying-Pin; Simon, Cory M; Arvapally, Ravi K; Martin, Richard L; Bosch, Mathieu; Liu, Tian-Fu; Fordham, Stephen; Yuan, Daqiang; Omary, Mohammad A; Haranczyk, Maciej; Smit, Berend; Zhou, Hong-Cai

    2014-12-04

    Metal-organic frameworks with high stability have been pursued for many years due to the sustainability requirement for practical applications. However, researchers have had great difficulty synthesizing chemically ultra-stable, highly porous metal-organic frameworks in the form of crystalline solids, especially as single crystals. Here we present a kinetically tuned dimensional augmentation synthetic route for the preparation of highly crystalline and extremely robust metal-organic frameworks with a preserved metal cluster core. Through this versatile synthetic route, we obtain large single crystals of 34 different iron-containing metal-organic frameworks. Among them, PCN-250(Fe2Co) exhibits high volumetric uptake of hydrogen and methane, and is also stable in water and aqueous solutions with a wide range of pH values.

  11. Tetratopic phenyl compounds, related metal-organic framework materials and post-assembly elaboration

    DOEpatents

    Farha, Omar K.; Hupp, Joseph T.

    2012-09-11

    Disclosed are tetratopic carboxylic acid phenyl for use in metal-organic framework compounds. These compounds are useful in catalysis, gas storage, sensing, biological imaging, drug delivery and gas adsorption separation.

  12. Tetratopic phenyl compounds, related metal-organic framework materials and post-assembly elaboration

    DOEpatents

    Farha, Omar K; Hupp, Joseph T

    2013-06-25

    Disclosed are tetratopic carboxylic acid phenyl for use in metal-organic framework compounds. These compounds are useful in catalysis, gas storage, sensing, biological imaging, drug delivery and gas adsorption separation.

  13. Metal-organic framework materials based on icosahedral boranes and carboranes

    DOEpatents

    Mirkin, Chad A.; Hupp, Joseph T.; Farha, Omar K.; Spokoyny, Alexander M.; Mulfort, Karen L.

    2010-11-02

    Disclosed herein are metal-organic frameworks of metals and boron rich ligands, such as carboranes and icosahedral boranes. Methods of synthesizing and using these materials in gas uptake are disclosed.

  14. An amine-functionalized metal-organic framework as a sensing platform for DNA detection.

    PubMed

    Zhang, Hao-Tian; Zhang, Jian-Wei; Huang, Gang; Du, Zi-Yi; Jiang, Hai-Long

    2014-10-18

    An amine-functionalized metal-organic framework (MOF) has been employed as an effective fluorescent sensing platform for DNA detection and is capable of distinguishing complementary and mismatched target sequences with high sensitivity and selectivity.

  15. Role of hydrocarbons in pore expansion and contraction of a flexible metal-organic framework

    SciTech Connect

    Motkuri, Radha K.; Thallapally, Praveen K.; Nune, Satish K.; Fernandez, Carlos A.; McGrail, B. Peter; Atwood, Jerry L.

    2011-05-06

    A flexible metal organic framework obtained from a flexible organic linker shows a breathing phenomenon upon adsorption of polar protic and non-polar solvents. Sorption profiles indicate favorable interactions with non-polar solvents over polar solvents.

  16. Magnetic Metal-Organic Frameworks for Efficient Carbon Dioxide Capture and Remote Trigger Release.

    PubMed

    Li, Haiqing; Sadiq, Muhammad Munir; Suzuki, Kiyonori; Ricco, Raffaele; Doblin, Christian; Hill, Anita J; Lim, Seng; Falcaro, Paolo; Hill, Matthew R

    2016-03-02

    Magnetic metal-organic framework (MOF) composites show highly efficient CO2 desorption capacities upon their exposure to an alternating magnetic field, demonstrating a magnetic induction swing strategy for potentially low-energy regeneration of MOF adsorbents.

  17. Near-infrared emitting ytterbium metal-organic frameworks with tunable excitation properties.

    PubMed

    White, Kiley A; Chengelis, Demetra A; Zeller, Matthias; Geib, Steven J; Szakos, Jessica; Petoud, Stéphane; Rosi, Nathaniel L

    2009-08-14

    The design of metal-organic frameworks (MOFs) incorporating near-infrared emitting ytterbium cations and organic sensitizers allows for the preparation of new materials with tunable and enhanced photophysical properties.

  18. Homochiral helical metal-organic frameworks of group 1 metals.

    PubMed

    Reger, Daniel L; Leitner, Andrew; Smith, Mark D; Tran, T Thao; Halasyamani, P Shiv

    2013-09-03

    The reactions of (S)-2-(1,8-naphthalimido)propanoic acid (HL(ala)) and (S)-2-(1,8-naphthalimido)-3-hydroxypropanoic acid (HL(ser)), protonated forms of ligands that contain a carboxylate donor group, an enantiopure chiral center, and a 1,8-naphthalimide π···π stacking supramolecular tecton and in the case of HL(ser) an alcohol functional group, with the appropriate alkali metal hydroxide followed by a variety of crystallization methods leads to the formation of crystalline K(L(ala))(MeOH) (1), K(L(ala))(H2O) (2), Na(L(ala))(H2O) (3), KL(ser) (4), CsL(ser) (5), and CsL(ala) (6). Each of these new complexes has a solid state structure based on six-coordinate metals linked into homochiral helical rod secondary building unit (SBU) central cores. In addition to the bonding of the carboxylate and solvent (in the case of L(ser) the ligand alcohol) to the metals, both oxygens on the 1,8-naphthalimide act as donor groups. One naphthalimide oxygen bonds to the same helical rod SBU as the carboxylate group of that ligand forming a chelate ring. The other naphthalimide oxygen bonds to adjacent SBUs. In complexes 1-3, this inter-rod link has a square arrangement bonding four other rods forming a three-dimensional enantiopure metal-organic framework (MOF) structure, whereas in 4-6 this link has a linear arrangement bonding two other rods forming a two-dimensional, sheet structure. In the latter case, the third dimension is supported exclusively by interdigitated π···π stacking interactions of the naphthalimide supramolecular tecton, forming enantiopure supramolecular MOF solids. Compounds 1-3 lose the coordinated solvent when heating above 100 °C. For 1, the polycrystalline powder reverts to 1 only by recrystallization from methanol, whereas compounds 2 and 3 undergo gas/solid, single-crystal to single-crystal transformations to form dehydrated compounds 2* and 3*, and rehydration occurs when crystals of these new complexes are left out in air. The reversible single

  19. Metal organic frameworks for enzyme immobilization in biofuel cells

    NASA Astrophysics Data System (ADS)

    Bodell, JaDee

    Interest in biofuel cells has been rapidly expanding as an ever-growing segment of the population gains access to electronic devices. The largest areas of growth for new populations using electronic devices are often in communities without electrical infrastructure. This lack of infrastructure in remote environments is one of the key driving factors behind the development of biofuel cells. Biofuel cells employ biological catalysts such as enzymes to catalyze oxidation and reduction reactions of select fuels to generate power. There are several benefits to using enzymes to catalyze reactions as compared to traditional fuel cells which use metal catalysts. First, enzymes are able to catalyze reactions at or near room temperature, whereas traditional metal catalysts are only efficient at very high temperatures. Second, biofuel cells can operate under mild pH conditions which is important for the eventual design of safe, commercially viable devices. Also, biofuel cells allow for implantable and flexible technologies. Finally, enzymes exhibit high selectivity and can be combined to fully oxidize or reduce the fuel which can generate several electrons from a single molecule of fuel, increasing the overall device efficiency. One of the main challenges which persist in biofuel cells is the instability of enzymes over time which tend to denature after hours or days. For a viable commercial biofuel cell to be produced, the stability of enzymes must be extended to months or years. Enzymes have been shown to have improved stability after being immobilized. The focus of this research was to find a metal organic framework (MOF) structure which could successfully immobilize enzymes while still allowing for electron transport to occur between the catalytic center of the enzyme and the electrode surface within a biofuel cell for power generation. Four MOF structures were successfully synthesized and were subsequently tested to determine the MOF's ability to immobilize the following

  20. Experimental Evidence Supported by Simulations of a Very High H2 Diffusion in Metal Organic Framework Materials

    NASA Astrophysics Data System (ADS)

    Salles, F.; Jobic, H.; Maurin, G.; Koza, M. M.; Llewellyn, P. L.; Devic, T.; Serre, C.; Ferey, G.

    2008-06-01

    Quasielastic neutron scattering measurements are combined with molecular dynamics simulations to extract the self-diffusion coefficient of hydrogen in the metal organic frameworks MIL-47(V) and MIL-53(Cr). We find that the diffusivity of hydrogen at low loading is about 2 orders of magnitude higher than in zeolites. Such a high mobility has never been experimentally observed before in any nanoporous materials, although it was predicted in carbon nanotubes. Either 1D or 3D diffusion mechanisms are elucidated depending on the chemical features of the MIL framework.

  1. Experimental Evidence Supported by Simulations of a Very High H{sub 2} Diffusion in Metal Organic Framework Materials

    SciTech Connect

    Salles, F.; Maurin, G.; Jobic, H.; Koza, M. M.; Llewellyn, P. L.; Devic, T.; Serre, C.; Ferey, G.

    2008-06-20

    Quasielastic neutron scattering measurements are combined with molecular dynamics simulations to extract the self-diffusion coefficient of hydrogen in the metal organic frameworks MIL-47(V) and MIL-53(Cr). We find that the diffusivity of hydrogen at low loading is about 2 orders of magnitude higher than in zeolites. Such a high mobility has never been experimentally observed before in any nanoporous materials, although it was predicted in carbon nanotubes. Either 1D or 3D diffusion mechanisms are elucidated depending on the chemical features of the MIL framework.

  2. Highly mesoporous metal-organic framework assembled in a switchable solvent

    NASA Astrophysics Data System (ADS)

    Peng, Li; Zhang, Jianling; Xue, Zhimin; Han, Buxing; Sang, Xinxin; Liu, Chengcheng; Yang, Guanying

    2014-07-01

    The mesoporous metal-organic frameworks are a family of materials that have pore sizes ranging from 2 to 50 nm, which have shown promising applications in catalysis, adsorption, chemical sensing and so on. The preparation of mesoporous metal-organic frameworks usually needs the supramolecular or cooperative template strategy. Here we report the template-free assembly of mesoporous metal-organic frameworks by using CO2-expanded liquids as switchable solvents. The mesocellular metal-organic frameworks with large mesopores (13-23 nm) are formed, and their porosity properties can be easily adjusted by controlling CO2 pressure. Moreover, the use of CO2 can accelerate the reaction for metal-organic framework formation from metal salt and organic linker due to the viscosity-lowering effect of CO2, and the product can be recovered through CO2 extraction. The as-synthesized mesocellular metal-organic frameworks are highly active in catalysing the aerobic oxidation of benzylic alcohols under mild temperature at atmospheric pressure.

  3. Highly mesoporous metal-organic framework assembled in a switchable solvent.

    PubMed

    Peng, Li; Zhang, Jianling; Xue, Zhimin; Han, Buxing; Sang, Xinxin; Liu, Chengcheng; Yang, Guanying

    2014-07-22

    The mesoporous metal-organic frameworks are a family of materials that have pore sizes ranging from 2 to 50 nm, which have shown promising applications in catalysis, adsorption, chemical sensing and so on. The preparation of mesoporous metal-organic frameworks usually needs the supramolecular or cooperative template strategy. Here we report the template-free assembly of mesoporous metal-organic frameworks by using CO2-expanded liquids as switchable solvents. The mesocellular metal-organic frameworks with large mesopores (13-23 nm) are formed, and their porosity properties can be easily adjusted by controlling CO2 pressure. Moreover, the use of CO2 can accelerate the reaction for metal-organic framework formation from metal salt and organic linker due to the viscosity-lowering effect of CO2, and the product can be recovered through CO2 extraction. The as-synthesized mesocellular metal-organic frameworks are highly active in catalysing the aerobic oxidation of benzylic alcohols under mild temperature at atmospheric pressure.

  4. A Green Strategy to Prepare Metal Oxide Superstructure from Metal-Organic Frameworks

    PubMed Central

    Song, Yonghai; Li, Xia; Wei, Changting; Fu, Jinying; Xu, Fugang; Tan, Hongliang; Tang, Juan; Wang, Li

    2015-01-01

    Metal or metal oxides with diverse superstructures have become one of the most promising functional materials in sensor, catalysis, energy conversion, etc. In this work, a novel metal-organic frameworks (MOFs)-directed method to prepare metal or metal oxide superstructure was proposed. In this strategy, nodes (metal ions) in MOFs as precursors to form ordered building blocks which are spatially separated by organic linkers were transformed into metal oxide micro/nanostructure by a green method. Two kinds of Cu-MOFs which could reciprocally transform by changing solvent were prepared as a model to test the method. Two kinds of novel CuO with three-dimensional (3D) urchin-like and 3D rods-like superstructures composed of nanoparticles, nanowires and nanosheets were both obtained by immersing the corresponding Cu-MOFs into a NaOH solution. Based on the as-formed CuO superstructures, a novel and sensitive nonenzymatic glucose sensor was developed. The small size, hierarchical superstructures and large surface area of the resulted CuO superstructures eventually contribute to good electrocatalytic activity of the prepared sensor towards the oxidation of glucose. The proposed method of hierarchical superstructures preparation is simple, efficient, cheap and easy to mass production, which is obviously superior to pyrolysis. It might open up a new way for hierarchical superstructures preparation. PMID:25669731

  5. A water-stable metal-organic framework of a zwitterionic carboxylate with dysprosium: a sensing platform for Ebolavirus RNA sequences.

    PubMed

    Qin, Liang; Lin, Li-Xian; Fang, Zhi-Ping; Yang, Shui-Ping; Qiu, Gui-Hua; Chen, Jin-Xiang; Chen, Wen-Hua

    2016-01-04

    We herein report a water-stable 3D dysprosium-based metal-organic framework (MOF) that can non-covalently interact with probe ss-DNA. The formed system can serve as an effective fluorescence sensing platform for the detection of complementary Ebolavirus RNA sequences with the detection limit of 160 pM.

  6. Structuring of metal-organic frameworks at the mesoscopic/macroscopic scale.

    PubMed

    Furukawa, Shuhei; Reboul, Julien; Diring, Stéphane; Sumida, Kenji; Kitagawa, Susumu

    2014-08-21

    The assembly of metal ions with organic ligands through the formation of coordination bonds gives crystalline framework materials, known as metal-organic frameworks (MOFs), which recently emerged as a new class of porous materials. Besides the structural designability of MOFs at the molecular length scale, the researchers in this field very recently made important advances in creating more complex architectures at the mesoscopic/macroscopic scale, in which MOF nanocrystals are used as building units to construct higher-order superstructures. The structuring of MOFs in such a hierarchical order certainly opens a new opportunity to improve the material performance via design of the physical form rather than altering the chemical component. This review highlights these superstructures and their applications by categorizing them into four dimensionalities, zero-dimensional (0D), one-dimensional (1D), two-dimensional (2D), and three-dimensional (3D) superstructures. Because the key issue for structuring of MOFs is to spatially control the nucleation process in desired locations, this review conceptually categorizes the available synthetic methodologies from the viewpoint of the reaction system.

  7. Biomimetic mineralization of metal-organic frameworks as protective coatings for biomacromolecules

    PubMed Central

    Liang, Kang; Ricco, Raffaele; Doherty, Cara M.; Styles, Mark J.; Bell, Stephen; Kirby, Nigel; Mudie, Stephen; Haylock, David; Hill, Anita J.; Doonan, Christian J.; Falcaro, Paolo

    2015-01-01

    Enhancing the robustness of functional biomacromolecules is a critical challenge in biotechnology, which if addressed would enhance their use in pharmaceuticals, chemical processing and biostorage. Here we report a novel method, inspired by natural biomineralization processes, which provides unprecedented protection of biomacromolecules by encapsulating them within a class of porous materials termed metal-organic frameworks. We show that proteins, enzymes and DNA rapidly induce the formation of protective metal-organic framework coatings under physiological conditions by concentrating the framework building blocks and facilitating crystallization around the biomacromolecules. The resulting biocomposite is stable under conditions that would normally decompose many biological macromolecules. For example, urease and horseradish peroxidase protected within a metal-organic framework shell are found to retain bioactivity after being treated at 80 °C and boiled in dimethylformamide (153 °C), respectively. This rapid, low-cost biomimetic mineralization process gives rise to new possibilities for the exploitation of biomacromolecules. PMID:26041070

  8. On the performance of Cu-BTC metal organic framework for carbon tetrachloride gas removal.

    PubMed

    Calero, Sofía; Martín-Calvo, Ana; Hamad, Said; García-Pérez, Elena

    2011-01-07

    The performance of Cu-BTC metal organic framework for carbon tetrachloride removal from air has been studied using molecular simulations. According to our results, this material shows extremely high adsorption selectivity in favour of carbon tetrachloride. We demonstrate that this selectivity can be further enhanced by selective blockage of the framework.

  9. Luminescent metal-organic framework films as highly sensitive and fast-response oxygen sensors.

    PubMed

    Dou, Zhongshang; Yu, Jiancan; Cui, Yuanjing; Yang, Yu; Wang, Zhiyu; Yang, Deren; Qian, Guodong

    2014-04-16

    Luminescent metal-organic framework films, CPM-5⊃Tb(3+) and MIL-100(In)⊃Tb(3+), have been constructed by postfunctionalization of two porous indium-organic frameworks with different structures, respectively. The MIL-100(In)⊃Tb(3+) film shows high oxygen sensitivity (KSV = 7.59) and short response/recovery time (6 s/53 s).

  10. Postsynthetic Modification of an Alkyne-Tagged Zirconium Metal-Organic Framework via a "Click" Reaction.

    PubMed

    Li, Bijian; Gui, Bo; Hu, Guiping; Yuan, Daqiang; Wang, Cheng

    2015-06-01

    Herein, we report the synthesis and postsynthetic modification of a novel alkyne-tagged zirconium metal-organic framework, UiO-68-alkyne. The alkynyl groups in the pore surface were subjected to a "click" reaction, achieving quantitative conversion and maintaining the crystallinity of the framework.

  11. Integration of metal-organic frameworks into an electrochemical dielectric thin film for electronic applications

    PubMed Central

    Li, Wei-Jin; Liu, Juan; Sun, Zhi-Hua; Liu, Tian-Fu; Lü, Jian; Gao, Shui-Ying; He, Chao; Cao, Rong; Luo, Jun-Hua

    2016-01-01

    The integration of porous metal-organic frameworks onto the surface of materials, for use as functional devices, is currently emerging as a promising approach for gas sensing and flexible displays. However, research focused on potential applications in electronic devices is in its infancy. Here we present a facile strategy by which interpenetrated, crystalline metal-organic framework films are deposited onto conductive metal-plate anodes via in situ temperature-controlled electrochemical assembly. The nanostructure of the surface as well as the thickness and uniformity of the film are well controlled. More importantly, the resulting films exhibit enhanced dielectric properties compared to traditional inorganic or organic gate dielectrics. This study demonstrates the successful implementation of the rational design of metal-organic framework thin films on conductive supports with high-performance dielectric properties. PMID:27282348

  12. Integration of metal-organic frameworks into an electrochemical dielectric thin film for electronic applications

    NASA Astrophysics Data System (ADS)

    Li, Wei-Jin; Liu, Juan; Sun, Zhi-Hua; Liu, Tian-Fu; Lü, Jian; Gao, Shui-Ying; He, Chao; Cao, Rong; Luo, Jun-Hua

    2016-06-01

    The integration of porous metal-organic frameworks onto the surface of materials, for use as functional devices, is currently emerging as a promising approach for gas sensing and flexible displays. However, research focused on potential applications in electronic devices is in its infancy. Here we present a facile strategy by which interpenetrated, crystalline metal-organic framework films are deposited onto conductive metal-plate anodes via in situ temperature-controlled electrochemical assembly. The nanostructure of the surface as well as the thickness and uniformity of the film are well controlled. More importantly, the resulting films exhibit enhanced dielectric properties compared to traditional inorganic or organic gate dielectrics. This study demonstrates the successful implementation of the rational design of metal-organic framework thin films on conductive supports with high-performance dielectric properties.

  13. Foldable interpenetrated metal-organic frameworks/carbon nanotubes thin film for lithium–sulfur batteries

    PubMed Central

    Mao, Yiyin; Li, Gaoran; Guo, Yi; Li, Zhoupeng; Liang, Chengdu; Peng, Xinsheng; Lin, Zhan

    2017-01-01

    Lithium–sulfur batteries are promising technologies for powering flexible devices due to their high energy density, low cost and environmental friendliness, when the insulating nature, shuttle effect and volume expansion of sulfur electrodes are well addressed. Here, we report a strategy of using foldable interpenetrated metal-organic frameworks/carbon nanotubes thin film for binder-free advanced lithium–sulfur batteries through a facile confinement conversion. The carbon nanotubes interpenetrate through the metal-organic frameworks crystal and interweave the electrode into a stratified structure to provide both conductivity and structural integrity, while the highly porous metal-organic frameworks endow the electrode with strong sulfur confinement to achieve good cyclability. These hierarchical porous interpenetrated three-dimensional conductive networks with well confined S8 lead to high sulfur loading and utilization, as well as high volumetric energy density. PMID:28262801

  14. Effect of organic substituents on the adsorption of carbon dioxide on a metal-organic framework

    NASA Astrophysics Data System (ADS)

    Thu Ha, Nguyen Thi; Lefedova, O. V.; Ha, Nguyen Ngoc

    2017-01-01

    The adsorption of carbon dioxide on the MOF-5 metal-organic framework and modifications of it obtained by replacing the hydrogen atoms in the organic ligands with electron donor (-CH3,-OCH3) or electron acceptor groups (-CN,-NO2) is investigated using the grand canonical Monte Carlo (GCMC) method and density functional theory (DFT). It is shown that the adsorption of carbon dioxide molecules on the structures of metal-organic frameworks is most likely on Zn4O clusters, and that the adsorption of carbon dioxide is of a physical nature. The presence of substituents-CH3,-OCH3,-CN in metal-organic frameworks increases their capacity to adsorb carbon dioxide, while that of nitro groups (-NO2) has the opposite effect.

  15. Homochiral metal-organic framework used as a stationary phase for high-performance liquid chromatography.

    PubMed

    Kong, Jiao; Zhang, Mei; Duan, Ai-Hong; Zhang, Jun-Hui; Yang, Rui; Yuan, Li-Ming

    2015-02-01

    Metal-organic frameworks are promising porous materials. Chiral metal-organic frameworks have attracted considerable attention in controlling enantioselectivity. In this study, a homochiral metal-organic framework [Co(2) (D-cam)(2) (TMDPy)] (D-cam = D-camphorates, TMDPy = 4,4'-trimethylenedipyridine) with a non-interpenetrating primitive cubic net has been used as a chiral stationary phase in high-performance liquid chromatography. It has allowed the successful separation of six positional isomers and six chiral compounds. The good selectivity and baseline separation, or at least 60% valley separation, confirmed its excellent molecular recognition characteristics. The relative standard deviations for the retention time of run-to-run and column-to-column were less than 1.8 and 3.1%, respectively. These results demonstrate that [Co(2) (D-cam)(2) (TMDPy)] may represent a promising chiral stationary phase for use in high-performance liquid chromatography.

  16. Foldable interpenetrated metal-organic frameworks/carbon nanotubes thin film for lithium-sulfur batteries

    NASA Astrophysics Data System (ADS)

    Mao, Yiyin; Li, Gaoran; Guo, Yi; Li, Zhoupeng; Liang, Chengdu; Peng, Xinsheng; Lin, Zhan

    2017-03-01

    Lithium-sulfur batteries are promising technologies for powering flexible devices due to their high energy density, low cost and environmental friendliness, when the insulating nature, shuttle effect and volume expansion of sulfur electrodes are well addressed. Here, we report a strategy of using foldable interpenetrated metal-organic frameworks/carbon nanotubes thin film for binder-free advanced lithium-sulfur batteries through a facile confinement conversion. The carbon nanotubes interpenetrate through the metal-organic frameworks crystal and interweave the electrode into a stratified structure to provide both conductivity and structural integrity, while the highly porous metal-organic frameworks endow the electrode with strong sulfur confinement to achieve good cyclability. These hierarchical porous interpenetrated three-dimensional conductive networks with well confined S8 lead to high sulfur loading and utilization, as well as high volumetric energy density.

  17. Tunable electrical conductivity in metal-organic framework thin film devices

    SciTech Connect

    Talin, Albert Alec; Allendorf, Mark D.; Stavila, Vitalie; Leonard, Francois

    2016-05-24

    A composition including a porous metal organic framework (MOF) including an open metal site and a guest species capable of charge transfer that can coordinate with the open metal site, wherein the composition is electrically conductive. A method including infiltrating a porous metal organic framework (MOF) including an open metal site with a guest species that is capable of charge transfer; and coordinating the guest species to the open metal site to form a composition including an electrical conductivity greater than an electrical conductivity of the MOF.

  18. Metal-organic frameworks as host materials of confined supercooled liquids

    NASA Astrophysics Data System (ADS)

    Fischer, J. K. H.; Sippel, P.; Denysenko, D.; Lunkenheimer, P.; Volkmer, D.; Loidl, A.

    2015-10-01

    In this work, we examine the use of metal-organic framework (MOF) systems as host materials for the investigation of glassy dynamics in confined geometry. We investigate the confinement of the molecular glass former glycerol in three MFU-type MOFs with different pore sizes (MFU stands for "Metal-Organic Framework Ulm-University") and study the dynamics of the confined liquid via dielectric spectroscopy. In accord with previous reports on confined glass formers, we find different degrees of deviations from bulk behavior depending on pore size, demonstrating that MOFs are well-suited host systems for confinement investigations.

  19. Multirate delivery of multiple therapeutic agents from metal-organic frameworks

    SciTech Connect

    McKinlay, Alistair C.; Allan, Phoebe K.; Renouf, Catherine L.; Duncan, Morven J.; Wheatley, Paul S.; Warrender, Stewart J.; Dawson, Daniel; Ashbrook, Sharon E.; Gil, Barbara; Marszalek, Bartosz; Düren, Tina; Williams, Jennifer J.; Charrier, Cedric; Mercer, Derry K.; Teat, Simon J.; Morris, Russell E.

    2014-12-01

    The highly porous nature of metal-organic frameworks (MOFs) offers great potential for the delivery of therapeutic agents. Here, we show that highly porous metal-organic frameworks can be used to deliver multiple therapeutic agents—a biologically active gas, an antibiotic drug molecule, and an active metal ion—simultaneously but at different rates. The possibilities offered by delivery of multiple agents with different mechanisms of action and, in particular, variable timescales may allow new therapy approaches. Here, we show that the loaded MOFs are highly active against various strains of bacteria.

  20. Alkylamine-tethered stable metal-organic framework for CO(2) capture from flue gas.

    PubMed

    Hu, Yingli; Verdegaal, Wolfgang M; Yu, Shu-Hong; Jiang, Hai-Long

    2014-03-01

    Different alkylamine molecules were post-synthetically tethered to the unsaturated Cr(III) centers in the metal-organic framework MIL-101. The resultant metal-organic frameworks show almost no N2 adsorption with significantly enhanced CO2 capture under ambient conditions as a result of the interaction between amine groups and CO2 molecules. Given the extraordinary stability, high CO2 uptake, ultrahigh CO2 /N2 selectivity, and mild regeneration energy, MIL-101-diethylenetriamine holds exceptional promise for post-combustion CO2 capture and CO2 /N2 separation.

  1. Tunable electrical conductivity in metal-organic framework thin film devices

    SciTech Connect

    Talin, Albert Alec; Allendorf, Mark D.; Stavila, Vitalie; Leonard, Francois

    2016-08-30

    A composition including a porous metal organic framework (MOF) including an open metal site and a guest species capable of charge transfer that can coordinate with the open metal site, wherein the composition is electrically conductive. A method including infiltrating a porous metal organic framework (MOF) including an open metal site with a guest species that is capable of charge transfer; and coordinating the guest species to the open metal site to form a composition including an electrical conductivity greater than an electrical conductivity of the MOF.

  2. Two metal-organic frameworks with different configurations constructed from a flexible tripodal triaromatic acid

    NASA Astrophysics Data System (ADS)

    Liang, Li-Li; Xu, Lei; Xue, Hong-Bao; Tao, Zhao-Lin; Chen, Fei-Jian

    2016-12-01

    Two metal-organic frameworks [Ce2(L)2(DMF)4] (1), and [Ni3(HL2-)4(bpe)3(H2O)4]·[H2N(CH3)2+]2(DMF)6(H2O)8 (2) (H3L = 4,4‧,4″-{[(2,4,6-trimethylbenzene-1,3,5-triyl)tris-(methylene)] tris(oxy)}tribenzoic acid, bpe = trans-4,4‧-bipyridylethylene) have been solvothermally synthesized from a flexible tripodal ligand. Single-crystal X-ray diffraction shows that compound 1 features a 3,6-connected double-layer network which is further connected by weak π-π interactions between benzene rings to form a 3D porous network. Compound 2 exhibits an unprecedented (4,5)-connected (33.42.5.62.72)2(6.84.10) topology based on zigzag chains and straight chains. In addition, thermal stabilities and luminescent properties of 1 and 2 were investigated in the solid state.

  3. Functionalization of plasmonic metamaterials utilizing metal-organic framework thin films

    NASA Astrophysics Data System (ADS)

    Jakšić, Zoran; Popović, Zora; Djerdj, Igor; Jaćimović, Željko K.; Radulović, Katarina

    2012-05-01

    We considered theoretically and experimentally a strategy to functionalize plasmonic metamaterials utilizing either a metal-organic framework (MOF) or inorganic-organic hybrids for application in adsorption-based gas sensing. MOFs are one-dimensional (1D), 2D or 3D crystalline compounds that simultaneously contain metal ions or ion clusters and organic moieties, forming thus porous networks ensuring an increased effective surface for adsorption. Metamaterials can enhance plasmonic sensor performance through metal-dielectric nanocompositing that simultaneously tailors the electromagnetic response and boosts adsorption of the targeted analyte through the use of nanopores. To perform functionalization, it is necessary to integrate one or several layers of MOF nanocrystals with the metamaterial scaffold. The simplest approach is to use dip or drop coating or the layer-by-layer technique. The scaffolds that we considered included freestanding, ultrathin membranes and sandwich structures with nanoaperture arrays. For this investigation, we used a non-aqueous sol-gel route to synthesize vanadium oxyanthracene carboxylate, a novel material with 1D crystal structure. Our results suggest that preferential concentration of analyte within the MOF pores may ensure improved adsorption and thus sensor sensitivity enhancement. Also, one may increase selectivity by introducing nanoparticle fillers or by utilizing other functionalizing materials such as catalysts or ligands.

  4. Structure and applications of metal-organic framework based on cyanide and 3,5-dichloropyridine

    NASA Astrophysics Data System (ADS)

    Etaiw, Safaa El-din H.; El-bendary, Mohamed M.

    2013-06-01

    The reaction of the aqueous/acetonitrile solutions of K3[Cu(CN)4] and 3,5-dichloropyridine (3,5-dClpy), in the presence of Me3SnCl affords a new metal-organic framework (MOF), 3∞[(CuCN)2·(3,5-dClpy)2], 1. The structure of the MOF 1 was characterized by IR, UV-visible, TGA and X-ray single crystal analysis. The structure of MOF 1 consists of CuCN building blocks which are connected by CN group forming 1D-zig-zag chains. Each chain is bridged to another chain by hydrogen bonding organizing 2D-sheets. The structure of 1 is further close packed by hydrogen bonds, π-π stacking and lp-π interactions creating 3D-network. The emission spectra and the thermodynamic parameters from TGA of the MOF 1 were discussed. The MOF 1 was used as heterogeneous catalyst for the oxidative discoloration of methylene blue dye (MB) by dilute solution of hydrogen peroxide as oxidant. The in vitro cytotoxic activity has been evaluated against the human breast cancer cell lines MCF-7. The cytotoxic effect of the MOF 1 on the viability of MCF-7 cells was determined by MTT assay.

  5. Unraveling the multi-functional behavior in a series of Metal Organic Frameworks

    SciTech Connect

    Sanda, Suresh; Biswas, Soumava; Parshamoni, Srinivasulu; Konar, Sanjit

    2015-09-15

    Three new 2D/3D Metal-Organic Frameworks (MOFs), ([Zn(2,6-ndc)(aldrithiol)]·3(H{sub 2}O)){sub n} (1), ([Co(2,6-ndc)(aldrithiol)(H{sub 2}O){sub 2}]·2(H{sub 2}O)){sub n} (2), ([Cd{sub 2}(2,6-ndc){sub 2}(aldrithiol){sub 2}(H{sub 2}O){sub 2}]·(aldrithiol)·(EtOH)·3(H{sub 2}O)){sub n} (3), (2,6-ndc = 2,6-naphthalene dicarboxylic acid; aldrithiol = 4,4'-dipyridyl disulphide) have been synthesized and structurally characterized. Compounds 1 and 2 have 2D layered architectures with similar framework topology whereas 3 is a 2-fold interwoven three dimensional framework. Sorption studies reveal that compounds 1-3 selectively adsorbs CO{sub 2} over other gases and H{sub 2}O over other solvents. Proton conductivity study of compounds 1 and 2 show highest values of 6.73 x 10{sup -7} S.cm{sup -1}, 1.96 x 10{sup -5} S.cm{sup -1} at 318 K and 95% RH and these values are humidity dependent. Photoluminescent properties of compounds 1 and 3 show metal perturbed (π*–π and π*-n) intra ligand charge transfer transitions. Additionally, Compound 3 also displays reversible adsorption of molecular iodine. - Graphical abstarct: Three new 2D/3D interpenetrated MOFs are synthesized and their multifunctional material properties such as adsorption, proton conduction, iodine adsorption as well as luminscence have been explored. - Highlights: • We report multifunctional material properties in a series MOFs (Compounds 1-3) • All the compounds show selective adsorption of CO{sub 2} over other gases and H{sub 2}O over other solvents. • The proton conduction property studies of all the compounds reveal the humidity dependent conductivity. • Compound 2 shows reversible adsorption of molecular iodine in the framework. • Photoluminescent properties of compounds 1 and 2 show metal perturbed intra ligand charge transfer transitions.

  6. van der Waals Metal-Organic Framework as an Excitonic Material for Advanced Photonics.

    PubMed

    Milichko, Valentin A; Makarov, Sergey V; Yulin, Alexey V; Vinogradov, Alexandr V; Krasilin, Andrei A; Ushakova, Elena; Dzyuba, Vladimir P; Hey-Hawkins, Evamarie; Pidko, Evgeny A; Belov, Pavel A

    2017-01-23

    Synergistic combination of organic and inorganic nature in van der Waals metal-organic frameworks supports different types of robust excitons that can be effectively and independently manipulated by light at room temperature, and opens new concepts for all-optical data processing and storage.

  7. Aqueous phase sensing of cyanide ions using a hydrolytically stable metal-organic framework.

    PubMed

    Karmakar, Avishek; Joarder, Biplab; Mallick, Abhik; Samanta, Partha; Desai, Aamod V; Basu, Sudipta; Ghosh, Sujit K

    2017-01-19

    A pure aqueous phase recognition and corresponding detoxification of highly toxic cyanide ions has been achieved by a fluorescent metal-organic framework (MOF). The cyanide detoxification has been shown to be effective even in in vitro studies and the MOF could be recycled to show the same efficiency of detoxification.

  8. Selective Bifunctional Modification of a Non-catenated Metal-Organic Framework Material via 'Click' Chemistry

    SciTech Connect

    Gadzikwa, Tendai; Farha, Omar K.; Malliakas, Christos D.; Kanatzidis, Mercouri G.; Hupp, Joseph T.; Nguyen, SonBinh T.; NWU

    2009-12-01

    A noncatenated, Zn-based metal-organic framework (MOF) material bearing silyl-protected acetylenes was constructed and postsynthetically modified using 'click' chemistry. Using a solvent-based, selective deprotection strategy, two different organic azides were 'clicked' onto the MOF crystals, resulting in a porous material whose internal and external surfaces are differently functionalized.

  9. A microporous metal-organic framework with polarized trifluoromethyl groups for high methane storage.

    PubMed

    Chang, Ganggang; Li, Bin; Wang, Hailong; Bao, Zongbi; Yildirim, Taner; Yao, Zizhu; Xiang, Shengchang; Zhou, Wei; Chen, Banglin

    2015-10-11

    A novel NbO-type metal-organic framework UTSA-88a with polarized trifluoromethyl groups exhibits a notably high methane storage capacity of 248 cm(3) (STP) cm(-3) (at room temperature and 65 bar) and a working capacity of 185 cm(3) (STP) cm(-3).

  10. Polydopamine tethered enzyme/metal-organic framework composites with high stability and reusability.

    PubMed

    Wu, Xiaoling; Yang, Cheng; Ge, Jun; Liu, Zheng

    2015-12-07

    An enzyme/metal-organic framework (MOF) composite with both highly stable and easily reusable features was prepared via tethering enzyme/MOF nanocrystals with polydopamine (PDA). The micrometer-sized PDA tethered enzyme/MOF composite can be easily repeatedly used without obvious activity loss, promising for efficient enzymatic catalysis at low cost with long-term operational stability under harsh conditions.

  11. Enantiopure anion templated synthesis of a zeolitic metal-organic framework.

    PubMed

    Xu, Zhong-Xuan; Ma, Yu-Lu; Zhang, Jian

    2016-01-31

    Utilizing (R)-H3CIA as a chiral template, an unprecedented homochiral metal-organic framework (MOF) with zeotype GIS topology is obtained from achiral 1.4-DIB ligands and Zn(II) ions, which opens up a feasible approach to create zeolitic MOFs with homochirality.

  12. Selective Adsorption of Sulfur Dioxide in a Robust Metal-Organic Framework Material.

    PubMed

    Savage, Mathew; Cheng, Yongqiang; Easun, Timothy L; Eyley, Jennifer E; Argent, Stephen P; Warren, Mark R; Lewis, William; Murray, Claire; Tang, Chiu C; Frogley, Mark D; Cinque, Gianfelice; Sun, Junliang; Rudić, Svemir; Murden, Richard T; Benham, Michael J; Fitch, Andrew N; Blake, Alexander J; Ramirez-Cuesta, Anibal J; Yang, Sihai; Schröder, Martin

    2016-10-01

    Selective adsorption of SO2 is realized in a porous metal-organic framework material, and in-depth structural and spectroscopic investigations using X-rays, infrared, and neutrons define the underlying interactions that cause SO2 to bind more strongly than CO2 and N2 .

  13. Unusual parallel and inclined interlocking modes in polyrotaxane-like metal-organic frameworks.

    PubMed

    Yang, Jin; Ma, Jian-Fang; Batten, Stuart R; Su, Zhong-Min

    2008-05-21

    We describe here two unusual polyrotaxane-like metal-organic frameworks of [Co2(1,3-bix)2(bpea)2] and [Cd4(1,4-bix)4(bpea)4] x 4H2O , where both species contain loops and rods that are interlaced in a highly rare "parallel" fashion in , but, uniquely, in an "inclined" fashion in .

  14. Lipase-supported metal-organic framework bioreactor catalyzes warfarin synthesis.

    PubMed

    Liu, Wan-Ling; Yang, Ni-Shin; Chen, Ya-Ting; Lirio, Stephen; Wu, Cheng-You; Lin, Chia-Her; Huang, Hsi-Ya

    2015-01-02

    A green and sustainable strategy synthesizes clinical medicine warfarin anticoagulant by using lipase-supported metal-organic framework (MOF) bioreactors (see scheme). These findings may be beneficial for future studies in the industrial production of chemical, pharmaceutical, and agrochemical precursors.

  15. Toward Metal-Organic Framework-Based Solar Cells: Enhancing Directional Exciton Transport by Collapsing Three-Dimensional Film Structures.

    PubMed

    Goswami, Subhadip; Ma, Lin; Martinson, Alex B F; Wasielewski, Michael R; Farha, Omar K; Hupp, Joseph T

    2016-11-16

    Owing to their ability to act as light-harvesting scaffolds, porphyrin-containing metal-organic frameworks (MOFs) are in the forefront of research on the application of highly ordered molecular materials to problems in solar-energy conversion. In this work, solvent-assisted linker exchange (SALE) is performed on a pillared paddlewheel porphyrin containing MOF thin film to collapse a 3D framework to a 2D framework. The change in dimensionality of the framework is confirmed by a decrease in the film thickness, the magnitude of which is in agreement with crystallographic parameters for related bulk materials. Furthermore, NMR spectroscopy performed on the digested sample suggests a similar change in geometry is achieved in bulk MOF samples. The decreased distance between the porphyrin chromophores in the 2D MOF film compared to the 3D film results in enhanced energy transfer through the film. The extent of energy transport was probed by assembling MOF thin film where the outermost layers are palladium porphyrin (P2) units, which act as energy traps and fluorescence quenchers. Steady-state emission spectroscopy together with time-resolved emission spectroscopy indicates that excitons can travel through about 9-11 layers (porphyrin layers) in 2D films, whereas in 3D films energy transfer occurs through no more than about 6-8 layers. The results are difficult to understand if only changes in MOF interlayer spacing are considered but become much more understandable if dipole-dipole coupling distances are considered.

  16. Metal-organic frameworks for thermoelectric energy-conversion applications

    SciTech Connect

    Talin, Albert Alec; Jones, Reese E.; Hopkins, Patrick E.

    2016-11-07

    Motivated by low cost, low toxicity, mechanical flexibility, and conformability over complex shapes, organic semiconductors are currently being actively investigated as thermoelectric (TE) materials to replace the costly, brittle, and non-eco-friendly inorganic TEs for near-ambient-temperature applications. Metal–organic frameworks (MOFs) share many of the attractive features of organic polymers, including solution processability and low thermal conductivity. A potential advantage of MOFs and MOFs with guest molecules (Guest@MOFs) is their synthetic and structural versatility, which allows both the electronic and geometric structure to be tuned through the choice of metal, ligand, and guest molecules. This could solve the long-standing challenge of finding stable, high-TE-performance n-type organic semiconductors, as well as promote high charge mobility via the long-range crystalline order inherent in these materials. In this paper, we review recent advances in the synthesis of MOF and Guest@MOF TEs and discuss how the Seebeck coefficient, electrical conductivity, and thermal conductivity could be tuned to further optimize TE performance.

  17. High Methane Storage Capacity in Aluminum Metal-Organic Frameworks

    SciTech Connect

    Gándara, Felipe; Furukawa, Hiroyasu; Lee, Seungkyu; Yaghi, Omar M.

    2014-08-14

    The use of porous materials to store natural gas in vehicles requires large amounts of methane per unit of volume. Here we report the synthesis, crystal structure and methane adsorption properties of two new aluminum metal–organic frameworks, MOF-519 and MOF-520. Both materials exhibit permanent porosity and high methane volumetric storage capacity: MOF-519 has a volumetric capacity of 200 and 279 cm3 cm–3 at 298 K and 35 and 80 bar, respectively, and MOF-520 has a volumetric capacity of 162 and 231 cm3 cm–3 under the same conditions. Furthermore, MOF-519 exhibits an exceptional working capacity, being able to deliver a large amount of methane at pressures between 5 and 35 bar, 151 cm3 cm–3, and between 5 and 80 bar, 230 cm3 cm–3.

  18. Metal-organic frameworks for thermoelectric energy-conversion applications

    DOE PAGES

    Talin, Albert Alec; Jones, Reese E.; Hopkins, Patrick E.

    2016-11-07

    Motivated by low cost, low toxicity, mechanical flexibility, and conformability over complex shapes, organic semiconductors are currently being actively investigated as thermoelectric (TE) materials to replace the costly, brittle, and non-eco-friendly inorganic TEs for near-ambient-temperature applications. Metal–organic frameworks (MOFs) share many of the attractive features of organic polymers, including solution processability and low thermal conductivity. A potential advantage of MOFs and MOFs with guest molecules (Guest@MOFs) is their synthetic and structural versatility, which allows both the electronic and geometric structure to be tuned through the choice of metal, ligand, and guest molecules. This could solve the long-standing challenge of findingmore » stable, high-TE-performance n-type organic semiconductors, as well as promote high charge mobility via the long-range crystalline order inherent in these materials. In this paper, we review recent advances in the synthesis of MOF and Guest@MOF TEs and discuss how the Seebeck coefficient, electrical conductivity, and thermal conductivity could be tuned to further optimize TE performance.« less

  19. Metal-Organic Frameworks: Bimetallic Metal-Organic Frameworks: Probing the Lewis Acid Site for CO2 Conversion (Small 17/2016).

    PubMed

    Zou, Ruyi; Li, Pei-Zhou; Zeng, Yong-Fei; Liu, Jia; Zhao, Ruo; Duan, Hui; Luo, Zhong; Wang, Jin-Gui; Zou, Ruqiang; Zhao, Yanli

    2016-05-01

    On page 2334, R. Q. Zou, Y. L. Zhao, and co-workers present a porous metal-organic framework (MOF) that serves as a platform for studying the metal exchange effect on both CO2 adsorption and catalytic fixation. The effect is demonstrated by catalytic CO2 cycloaddition with propylene oxide to produce propylene carbonate. Molecular dynamic simulations are carried out to further confirm the catalytic performance of these MOFs on chemical fixation of CO2 to carbonates. This research sheds light on how metal exchange could influence the intrinsic properties of MOFs.

  20. Selective Catalysis in Nanoparticle Metal-Organic Framework Composites

    NASA Astrophysics Data System (ADS)

    Stephenson, Casey Justin

    The design of highly selective catalysts are becoming increasingly important, especially as chemical and pharmaceutical industries seek to improve atom economy and minimize energy intensive separations that are often required to separate side products from the desired product. Enzymes are among the most selective of all catalysts, generally operating through molecular recognition whereby an active site analogous to a lock and the substrate is analogous to a key. The assembly of a porous, crystalline material around a catalytically active metal particle could serve as an artificial enzyme. In this vein, we first synthesized the polyvinylpyrrolidone (PVP) coated nanoparticles of interest and then encapsulated them within zeolitic imidazolate framework 8 or ZIF-8. 2.8 nm Pt-PVP nanoparticles, which were encapsulated within ZIF-8 to form Pt ZIF-8 composite. Pt ZIF-8 was inactive for the hydrogenation of cyclic olefins such as cis-cyclooctene and cis-cyclohexene while the composite proved to be a highly selective catalyst for the hydrogenation of terminal olefins, hydrogenating trans-1,3-hexadiene to 3-hexene in 95% selectivity after 24 hours under 1 bar H2. We extended our encapsulation method to sub-2 nm Au nanoparticles to form Au ZIF-8. Au ZIF-8 served as a highly chemoselective catalyst for the hydrogenation of crotonaldehyde an alpha,beta-unsaturated aldehyde, to crotyl alcohol an alpha,beta-unsaturated alcohol, in 90-95% selectivity. In order to investigate nanoparticle size effects on selectivity, 6-10 nm Au nanoparticles were encapsulated within ZIF-8 to form Au6 ZIF-8. Control catalysts with nanoparticles supported on the surface of ZIF-8 were synthesized as well, Au/ZIF-8 and Au6/ZIF-8. Au6 ZIF-8 hydrogenated crotonaldehyde in 85% selectivity towards the unsaturated alcohol. Catalysts with nanoparticles supported on the exterior of ZIF-8 were far less selective towards the unsaturated alcohol. Post-catalysis transmission electron microscopy analysis of Au ZIF

  1. A Rigid Nested Metal-Organic Framework Featuring a Thermoresponsive Gating Effect Dominated by Counterions.

    PubMed

    Gao, Qiang; Xu, Jian; Cao, Dapeng; Chang, Ze; Bu, Xian-He

    2016-11-21

    We herein report a rigid nested metal-organic framework (MOF) featuring a unique thermoresponsive gating adsorption behavior, which, in contrast to any known flexibility modes for stimuli-responsive MOFs, depends on the thermal motion of the extra-framework counterions. In addition, this MOF also exhibits adsorption selectivity of CO2 over N2 , H2 , and Ar at 273 K, thus enabling a strategic separation and encapsulation of CO2 .

  2. Peptide assembly-driven metal-organic framework (MOF) motors for micro electric generators.

    PubMed

    Ikezoe, Yasuhiro; Fang, Justin; Wasik, Tomasz L; Uemura, Takashi; Zheng, Yongtai; Kitagawa, Susumu; Matsui, Hiroshi

    2015-01-14

    Peptide-metal-organic framework (Pep-MOF) motors, whose motions are driven by anisotropic surface tension gradients created via peptide self-assembly around frameworks, can rotate microscopic rotors and magnets fast enough to generate an electric power of 0.1 μW. A new rigid Pep-MOF motor can be recycled by refilling the peptide fuel into the nanopores of the MOF.

  3. A novel cryogenic magnetic refrigerant metal-organic framework based on 1D gadolinium(III) chain

    NASA Astrophysics Data System (ADS)

    Tang, Qun; Li, Peng-Fei; Zou, Zhi-Ming; Liu, Zheng; Liu, Shu-Xia

    2017-02-01

    A metal-organic framework (MOF) based on gadolinium ion (Gd3+) and tricarboxylate ligand, [Gd(BTPCA)(H2O)]·2DMF·3H2O (Gd-BTPCA) (H3BTPCA =1,1‧,1‧-(benzene-1,3,5-triyl)tripiperidine-4-carboxylic acid; DMF=dimethylformamide), was synthesized and structurally characterized. The adjacent Gd3+ ions are intraconnected by the carboxylate groups of the BTPCA3- ligands to form a 1D Gd3+ ion chain. The 1D Gd3+ ion chains are interconnected by the BTPCA3- ligands, giving rise to a 3D framework with 1D open channel. The magnetic studies indicate that Gd-BTPCA exhibits weak ferromagnetic interactions, and acts as a cryogenic magnetic refrigerant having the magnetic entropy change (-ΔSm) of 20.40 J kg-1 K-1 for ΔH =7 T at 3 K.

  4. A colour image reproduction framework for 3D colour printing

    NASA Astrophysics Data System (ADS)

    Xiao, Kaida; Sohiab, Ali; Sun, Pei-li; Yates, Julian M.; Li, Changjun; Wuerger, Sophie

    2016-10-01

    In this paper, the current technologies in full colour 3D printing technology were introduced. A framework of colour image reproduction process for 3D colour printing is proposed. A special focus was put on colour management for 3D printed objects. Two approaches, colorimetric colour reproduction and spectral based colour reproduction are proposed in order to faithfully reproduce colours in 3D objects. Two key studies, colour reproduction for soft tissue prostheses and colour uniformity correction across different orientations are described subsequently. Results are clear shown that applying proposed colour image reproduction framework, performance of colour reproduction can be significantly enhanced. With post colour corrections, a further improvement in colour process are achieved for 3D printed objects.

  5. Selective sulfur dioxide adsorption on crystal defect sites on an isoreticular metal organic framework series.

    PubMed

    Rodríguez-Albelo, L Marleny; López-Maya, Elena; Hamad, Said; Ruiz-Salvador, A Rabdel; Calero, Sofia; Navarro, Jorge A R

    2017-02-15

    The widespread emissions of toxic gases from fossil fuel combustion represent major welfare risks. Here we report the improvement of the selective sulfur dioxide capture from flue gas emissions of isoreticular nickel pyrazolate metal organic frameworks through the sequential introduction of missing-linker defects and extra-framework barium cations. The results and feasibility of the defect pore engineering carried out are quantified through a combination of dynamic adsorption experiments, X-ray diffraction, electron microscopy and density functional theory calculations. The increased sulfur dioxide adsorption capacities and energies as well as the sulfur dioxide/carbon dioxide partition coefficients values of defective materials compared to original non-defective ones are related to the missing linkers enhanced pore accessibility and to the specificity of sulfur dioxide interactions with crystal defect sites. The selective sulfur dioxide adsorption on defects indicates the potential of fine-tuning the functional properties of metal organic frameworks through the deliberate creation of defects.

  6. Selective sulfur dioxide adsorption on crystal defect sites on an isoreticular metal organic framework series

    NASA Astrophysics Data System (ADS)

    Rodríguez-Albelo, L. Marleny; López-Maya, Elena; Hamad, Said; Ruiz-Salvador, A. Rabdel; Calero, Sofia; Navarro, Jorge A. R.

    2017-02-01

    The widespread emissions of toxic gases from fossil fuel combustion represent major welfare risks. Here we report the improvement of the selective sulfur dioxide capture from flue gas emissions of isoreticular nickel pyrazolate metal organic frameworks through the sequential introduction of missing-linker defects and extra-framework barium cations. The results and feasibility of the defect pore engineering carried out are quantified through a combination of dynamic adsorption experiments, X-ray diffraction, electron microscopy and density functional theory calculations. The increased sulfur dioxide adsorption capacities and energies as well as the sulfur dioxide/carbon dioxide partition coefficients values of defective materials compared to original non-defective ones are related to the missing linkers enhanced pore accessibility and to the specificity of sulfur dioxide interactions with crystal defect sites. The selective sulfur dioxide adsorption on defects indicates the potential of fine-tuning the functional properties of metal organic frameworks through the deliberate creation of defects.

  7. Selective sulfur dioxide adsorption on crystal defect sites on an isoreticular metal organic framework series

    PubMed Central

    Rodríguez-Albelo, L. Marleny; López-Maya, Elena; Hamad, Said; Ruiz-Salvador, A. Rabdel; Calero, Sofia; Navarro, Jorge A.R.

    2017-01-01

    The widespread emissions of toxic gases from fossil fuel combustion represent major welfare risks. Here we report the improvement of the selective sulfur dioxide capture from flue gas emissions of isoreticular nickel pyrazolate metal organic frameworks through the sequential introduction of missing-linker defects and extra-framework barium cations. The results and feasibility of the defect pore engineering carried out are quantified through a combination of dynamic adsorption experiments, X-ray diffraction, electron microscopy and density functional theory calculations. The increased sulfur dioxide adsorption capacities and energies as well as the sulfur dioxide/carbon dioxide partition coefficients values of defective materials compared to original non-defective ones are related to the missing linkers enhanced pore accessibility and to the specificity of sulfur dioxide interactions with crystal defect sites. The selective sulfur dioxide adsorption on defects indicates the potential of fine-tuning the functional properties of metal organic frameworks through the deliberate creation of defects. PMID:28198376

  8. A metal organic framework-polyaniline nanocomposite as a fiber coating for solid phase microextraction.

    PubMed

    Bagheri, Habib; Javanmardi, Hasan; Abbasi, Alireza; Banihashemi, Solmaz

    2016-01-29

    A metal organic framework-polyaniline (MOF/PANI) nanocomposite was electrodeposited on a stainless steel wire and used as a solid phase microextraction (SPME) fiber coating. The electropolymerization process was carried out under a constant deposition potential and applied to the corresponding aqueous electrolyte containing aniline and MOF particles. The employment of MOFs with their large and small cages and 3-D structures in synthesizing a nanocomposite was assumed to be efficient constitutes to induce more non-smooth and porous structures, approved by scanning electron microscopy (SEM) images. Three different MOFs were incorporated to synthesize the desired nanocomposites and the preliminary experiments showed that all of them, particularly the one containing MOF2, have higher extraction performances in compared with PANI. The applicability of the new fiber coating was examined by headspace-solid phase microextraction (HS-SPME) of some chlorobenzenes (CBs) from aqueous samples. Influencing parameters on the synthesize and extraction processes including the electrodeposition voltage and its duration time, the weight ratio of PANI and MOF, the ionic strength, desorption temperature and time, and extraction time and temperature were optimized. The developed method was validated by analyzing the spiked distilled water and gas chromatography-mass spectrometry (GC-MS). Under optimum condition, the relative standard deviation (RSD%) values for a double distilled water spiked with the selected CBs at 20ngL(-1) were 5-8% (n=3) and the detection limits were below 0.2ngL(-1). The linear dynamic range (LDR) of the method was in the concentration range of 0.5-1000ngL(-1) (R(2)>0.9994). The fiber-to-fiber reproducibility was found to be in the range of 4-7%. Eventually, various real-water samples were analyzed by the MOF/PANI-based HS-SPME and GC-MS and the relative recovery values were found to be in the range of 92-98%.

  9. Diamondoid Structure in a Metal-Organic Framework of Fe4 Single-Molecule Magnets.

    PubMed

    Rigamonti, Luca; Cotton, Carri; Nava, Andrea; Lang, Heinrich; Rüffer, Tobias; Perfetti, Mauro; Sorace, Lorenzo; Barra, Anne-Laure; Lan, Yanhua; Wernsdorfer, Wolfgang; Sessoli, Roberta; Cornia, Andrea

    2016-09-12

    A 3D metal-organic framework (MOF) having single-molecule magnet (SMM) linkers was prepared in crystalline form by using a tetrairon(III) complex functionalised with two divergent pyridyl groups, namely [Fe4 (pPy)2 (dpm)6 ] (1; H3 pPy=2-(hydroxymethyl)-2-(pyridin-4-yl)propane-1,3-diol, Hdpm=dipivaloylmethane). Reaction of 1 with silver(I) perchlorate afforded {[Fe4 (pPy)2 (dpm)6 ]2 Ag}ClO4 (2), which crystallises in a cubic face-centred lattice and exhibits two interlocked diamondoid networks. In 2, the SMMs act as linear ditopic synthons, and silver(I) ions as tetrahedral nodes coordinated by four pyridyl nitrogen atoms. The magnetic properties of 1 (S=5 and D≈-0.4 cm(-1) in the ground spin state) are largely preserved in 2, which shows slow magnetic relaxation with an anisotropy barrier of Ueff /kB =11.46(10) K in zero field and 14.25(8) K in an applied field of 1 kOe. However, crystal symmetry triggers highly noncollinear magnetic anisotropy contributions oriented at 109.47° from each other along the threefold axes of AgN4 tetrahedra, a unique scenario fully confirmed by a single-crystal cantilever torque magnetometry investigation. Magnetisation curves down to 0.03 K demonstrated the occurrence of a wide hysteresis loop when the magnetic field was swept along one of the four Ag-N bonds. By symmetry, the crystalline compound can then be persistently magnetised parallel or antiparallel to the four main diagonals of the unit cell, although the crystals have no overall second-order anisotropy.

  10. Metal-organic frameworks with phosphotungstate incorporated for hydrolytic cleavage of a DNA-model phosphodiester.

    PubMed

    Han, Qiuxia; Zhang, Lejie; He, Cheng; Niu, Jiangyang; Duan, Chunying

    2012-05-07

    Five phosphotungstate-incorporated metal-organic frameworks {[Eu(4)(dpdo)(9)(H(2)O)(16)PW(12)O(40)]}(PW(12)O(40))(2)·(dpdo)(3)·Cl(3) (1); {ZnNa(2)(μ-OH)(dpdo)(4)(H(2)O)(4)[PW(12)O(40)]}·3H(2)O (2); {Zn(3)(dpdo)(7)}[PW(12)O(40)](2)·3H(2)O (3); and [Ln(2)H(μ-O)(2)(dpdo)(4)(H(2)O)(2)][PW(12)O(40)]·3H(2)O (Ln = Ho for 4 and Yb for 5) (dpdo = 4,4'-bipyridine-N,N'-dioxide) have been synthesized through a one-step hydrothermal reaction and characterized by elemental analyses, infrared (IR) spectroscopy, photoluminescence, and single-crystal X-ray diffraction (XRD). The structural analyses indicate that 1-5 display diversity structure from one-dimensional (1D) to three-dimensional (3D) series of hybrids. Kinetic experiments for the hydrolytic cleavage of DNA-model phosphodiester BNPP (bis(p-nitrophenyl)phosphate) were followed spectrophotometrically for the absorbance increase at 400 nm in EPPS (4-(2-hydroxyethyl)piperazine-1-propane sulfonic acid) buffer solution, because of the formation of p-nitrophenoxide with 1-5 under conditions of pH 4.0 and 50 °C. Ultraviolet (UV) spectroscopy indicate that the cleavage of the phosphodiester bond proceeds with the pseudo-first-order rate constant in the range of 10(-7)-10(-6) s(-1), giving an inorganic phosphate and p-nitrophenol as the final products of hydrolysis. The results demonstrate that 1-5 have good catalytic activity and reusability for hydrolytic cleavage of BNPP.

  11. Three-dimensional Printed Acrylonitrile Butadiene Styrene Framework Coated with Cu-BTC Metal-organic Frameworks for the Removal of Methylene Blue

    PubMed Central

    Wang, Zongyuan; Wang, Jiajun; Li, Minyue; Sun, Kaihang; Liu, Chang-jun

    2014-01-01

    Three-dimensional (3D) printing was applied for the fabrication of acrylonitrile butadiene styrene (ABS) framework. Functionalization of the ABS framework was then performed by coating of porous Cu-BTC (BTC = benzene tricarboxylic acid) metal-organic frameworks on it using a step-by-step in-situ growth. The size of the Cu-BTC particles on ABS was ranged from 200 nm to 900 nm. The Cu-BTC/ABS framework can take up most of the space of the tubular reactor that makes the adsorption effective with no need of stirring. Methylene blue (MB) can be readily removed from aqueous solution by this Cu-BTC/ABS framework. The MB removal efficiency for solutions with concentrations of 10 and 5 mg/L was 93.3% and 98.3%, respectively, within 10 min. After MB adsorption, the Cu-BTC/ABS composite can easily be recovered without the need for centrifugation or filtration and the composite is reusable. In addition the ABS framework can be recovered for subsequent reuse. A significant advantage of 3D-printed frameworks is that different frameworks can be easily fabricated to meet the needs of different applications. This is a promising strategy to synthesize new frameworks using MOFs and polymers to develop materials for applications beyond adsorption. PMID:25089616

  12. Three-dimensional Printed Acrylonitrile Butadiene Styrene Framework Coated with Cu-BTC Metal-organic Frameworks for the Removal of Methylene Blue

    NASA Astrophysics Data System (ADS)

    Wang, Zongyuan; Wang, Jiajun; Li, Minyue; Sun, Kaihang; Liu, Chang-Jun

    2014-08-01

    Three-dimensional (3D) printing was applied for the fabrication of acrylonitrile butadiene styrene (ABS) framework. Functionalization of the ABS framework was then performed by coating of porous Cu-BTC (BTC = benzene tricarboxylic acid) metal-organic frameworks on it using a step-by-step in-situ growth. The size of the Cu-BTC particles on ABS was ranged from 200 nm to 900 nm. The Cu-BTC/ABS framework can take up most of the space of the tubular reactor that makes the adsorption effective with no need of stirring. Methylene blue (MB) can be readily removed from aqueous solution by this Cu-BTC/ABS framework. The MB removal efficiency for solutions with concentrations of 10 and 5 mg/L was 93.3% and 98.3%, respectively, within 10 min. After MB adsorption, the Cu-BTC/ABS composite can easily be recovered without the need for centrifugation or filtration and the composite is reusable. In addition the ABS framework can be recovered for subsequent reuse. A significant advantage of 3D-printed frameworks is that different frameworks can be easily fabricated to meet the needs of different applications. This is a promising strategy to synthesize new frameworks using MOFs and polymers to develop materials for applications beyond adsorption.

  13. Fluorous Metal-Organic Frameworks with Enhanced Stability and High H2/CO2 Storage Capacities

    PubMed Central

    Zhang, Da-Shuai; Chang, Ze; Li, Yi-Fan; Jiang, Zhong-Yi; Xuan, Zhi-Hong; Zhang, Ying-Hui; Li, Jian-Rong; Chen, Qiang; Hu, Tong-Liang; Bu, Xian-He

    2013-01-01

    A new class of metal-organic frameworks (MOFs) has been synthesized by ligand-functionalization strategy. Systematic studies of their adsorption properties were performed at low and high pressure. Importantly, when fluorine was introduced into the framework via the functionalization, both the framework stabilities and adsorption capacities towards H2/CO2 were enhanced significantly. This consequence can be well interpreted by theoretical studies of these MOFs structures. In addition, one of these MOFs TKL-107 was used to fabricate mixed matrix membranes, which exhibit great potential for the application of CO2 separation. PMID:24264725

  14. Aromatizing olefin metathesis by ligand isolation inside a metal-organic framework.

    PubMed

    Vermeulen, Nicolaas A; Karagiaridi, Olga; Sarjeant, Amy A; Stern, Charlotte L; Hupp, Joseph T; Farha, Omar K; Stoddart, J Fraser

    2013-10-09

    The aromatizing ring-closing metathesis has been shown to take place inside an extended porous framework. Employing a combination of solvent-assisted linker exchange and postsynthesis modification using olefin metathesis, the noninterpenetrated SALEM-14 was formed and converted catalytically into PAH-MOF-1 with polycyclic aromatic hydrocarbon (PAH) pillars. The metal-organic framework in SALEM-14 prevents "intermolecular" olefin metathesis from occurring between the pillars in the presence of the first generation Hoveyda-Grubbs catalyst, while favoring the production of a PAH, which can be released from the framework under acidic conditions in dimethylsulfoxide.

  15. Polydopamine tethered enzyme/metal-organic framework composites with high stability and reusability

    NASA Astrophysics Data System (ADS)

    Wu, Xiaoling; Yang, Cheng; Ge, Jun; Liu, Zheng

    2015-11-01

    An enzyme/metal-organic framework (MOF) composite with both highly stable and easily reusable features was prepared via tethering enzyme/MOF nanocrystals with polydopamine (PDA). The micrometer-sized PDA tethered enzyme/MOF composite can be easily repeatedly used without obvious activity loss, promising for efficient enzymatic catalysis at low cost with long-term operational stability under harsh conditions.An enzyme/metal-organic framework (MOF) composite with both highly stable and easily reusable features was prepared via tethering enzyme/MOF nanocrystals with polydopamine (PDA). The micrometer-sized PDA tethered enzyme/MOF composite can be easily repeatedly used without obvious activity loss, promising for efficient enzymatic catalysis at low cost with long-term operational stability under harsh conditions. Electronic supplementary information (ESI) available: Synthesis of enzyme-MOF nanocrystals, SEM, TEM, CLSM characterization and measurements of enzymatic performances. See DOI: 10.1039/c5nr05190h

  16. Microporous metal-organic framework with potential for carbon dioxide capture at ambient conditions.

    PubMed

    Xiang, Shengchang; He, Yabing; Zhang, Zhangjing; Wu, Hui; Zhou, Wei; Krishna, Rajamani; Chen, Banglin

    2012-07-17

    Carbon dioxide capture and separation are important industrial processes that allow the use of carbon dioxide for the production of a range of chemical products and materials, and to minimize the effects of carbon dioxide emission. Porous metal-organic frameworks are promising materials to achieve such separations and to replace current technologies, which use aqueous solvents to chemically absorb carbon dioxide. Here we show that a metal-organic frameworks (UTSA-16) displays high uptake (160 cm(3) cm(-3)) of CO(2) at ambient conditions, making it a potentially useful adsorbent material for post-combustion carbon dioxide capture and biogas stream purification. This has been further confirmed by simulated breakthrough experiments. The high storage capacities and selectivities of UTSA-16 for carbon dioxide capture are attributed to the optimal pore cages and the strong binding sites to carbon dioxide, which have been demonstrated by neutron diffraction studies.

  17. polyMOFs: A Class of Interconvertible Polymer-Metal-Organic-Framework Hybrid Materials.

    PubMed

    Zhang, Zhenjie; Nguyen, Ha Thi Hoang; Miller, Stephen A; Cohen, Seth M

    2015-05-18

    Preparation of porous materials from one-dimensional polymers is challenging because the packing of polymer chains results in a dense, non-porous arrangement. Herein, we demonstrate the remarkable adaptation of an amorphous, linear, non-porous, flexible organic polymer into a three-dimensional, highly porous, crystalline solid, as the organic component of a metal-organic framework (MOF). A polymer with aromatic dicarboxylic acids in the backbone functioned as a polymer ligand upon annealing with Zn(II), generating a polymer-metal-organic framework (polyMOF). These materials break the dogma that MOFs must be prepared from small, rigid ligands. Similarly, polyMOFs contradict conventional polymer chemistry by demonstrating that linear and amorphous polymers can be readily coaxed into a highly crystalline, porous, three-dimensional structure by coordination chemistry.

  18. Interplay between defects, disorder and flexibility in metal-organic frameworks

    NASA Astrophysics Data System (ADS)

    Bennett, Thomas D.; Cheetham, Anthony K.; Fuchs, Alain H.; Coudert, François-Xavier

    2017-01-01

    Metal-organic frameworks are a novel family of chemically diverse materials, which are of interest across engineering, physics, chemistry, biology and medicine-based disciplines. Since the development of the field in its current form more than two decades ago, priority has been placed on the synthesis of new structures. However, more recently, a clear trend has emerged in shifting the emphasis from material design to exploring the chemical and physical properties of structures already known. In particular, although such nanoporous materials were traditionally seen as rigid crystalline structures, there is growing evidence that large-scale flexibility, the presence of defects and long-range disorder are not the exception in metal-organic frameworks, but the rule. Here we offer some perspective into how these concepts are perhaps inescapably intertwined, highlight recent advances in our understanding and discuss how a consideration of the interfaces between them may lead to enhancements of the materials' functionalities.

  19. Application of metal-organic frameworks for purification of vegetable oils.

    PubMed

    Vlasova, E A; Yakimov, S A; Naidenko, E V; Kudrik, E V; Makarov, S V

    2016-01-01

    Reported here is the synthesis of aluminum-, zinc- and titanium-containing metal-organic frameworks based on terephthalic acid and an investigation on the possibility of using these compounds as adsorbents for the purification of unrefined vegetable oils. It is found that aluminum-, zinc- and titanium-containing metal-organic frameworks improve the physicochemical properties of unrefined vegetable oils (more pleasant taste and odor) due to the binding of free fatty acids and peroxide compounds. It is established that the synthesized materials are more effective in these respects as compared with traditional adsorbents. An adsorption mechanism of free fatty acids and peroxides is proposed. Last but not least, the used MOF can be easily recycled at least five times, via solvent washing.

  20. Metal-Organic Framework-Based Nanomedicine Platforms for Drug Delivery and Molecular Imaging.

    PubMed

    Cai, Wen; Chu, Cheng-Chao; Liu, Gang; Wáng, Yì-Xiáng J

    2015-10-07

    Metal-organic frameworks (MOFs), which are a unique class of hybrid porous materials built from metal ions and organic linkers, have attracted significant research interest in recent years. Compared with conventional porous materials, MOFs exhibit a variety of advantages, including a large surface area, a tunable pore size and shape, an adjustable composition and structure, biodegradability, and versatile functionalities, which enable MOFs to perform as promising platforms for drug delivery, molecular imaging, and theranostic applications. In this article, the recent research progress related to nanoscale metal-organic frameworks (NMOFs) is summarized with a focus on synthesis strategies and drug delivery, molecular imaging, and theranostic applications. The future challenges and opportunities of NMOFs are also discussed in the context of translational medical research. More effort is warranted to develop clinically translatable NMOFs for various applications in nanomedicine.

  1. Metal-organic frameworks: structure, properties, methods of synthesis and characterization

    NASA Astrophysics Data System (ADS)

    Butova, V. V.; Soldatov, M. A.; Guda, A. A.; Lomachenko, K. A.; Lamberti, C.

    2016-03-01

    This review deals with key methods of synthesis and characterization of metal-organic frameworks (MOFs). The modular structure affords a wide variety of MOFs with different active metal sites and organic linkers. These compounds represent a new stage of development of porous materials in which the pore size and the active site structure can be modified within wide limits. The set of experimental methods considered in this review is sufficient for studying the short-range and long-range order of the MOF crystal structure, determining the morphology of samples and elucidating the processes that occur at the active metal site in the course of chemical reactions. The interest in metal-organic frameworks results, first of all, from their numerous possible applications, ranging from gas separation and storage to chemical reactions within the pores. The bibliography includes 362 references.

  2. Microporous metal-organic frameworks for storage and separation of small hydrocarbons.

    PubMed

    He, Yabing; Zhou, Wei; Krishna, Rajamani; Chen, Banglin

    2012-12-18

    Hydrocarbons are very important energy resources and raw materials for some industrially important products and fine chemicals. There is a need for the discovery of better materials that offer enhanced capacities for safe storage of hydrocarbons. Furthermore, the development of improved separation technologies will lead to significant reduction in energy requirements and costs. In this feature article, we provide an overview of the current status of the emerging microporous metal-organic frameworks for the storage and separation of small hydrocarbons.

  3. Protection and deprotection approach for the introduction of functional groups into metal-organic frameworks.

    PubMed

    Yamada, Teppei; Kitagawa, Hiroshi

    2009-05-13

    A noncoordinating hydroxyl group was introduced into a metal-organic framework (MOF) by a procedure involving a protection, complexation, and deprotection (PCD) reaction sequence, and the crystal structure of a novel MOF, [Zn(dhybdc)(bpy)] x 4 DMF (1), was determined. 1 did not have an interpenetrated structure. The three-dimensional pores had large apertures. Results showed that the PCD method is a novel synthetic method for the introduction of various functional groups into MOFs.

  4. Separation of polar compounds using a flexible metal-organic framework

    SciTech Connect

    Motkuri, Radha K.; Thallapally, Praveen K.; Annapureddy, Harsha V.; Dang, Liem X.; Krishna, Rajamani; Nune, Satish K.; Fernandez, Carlos A.; Liu, Jian; McGrail, B. Peter

    2015-01-01

    A flexible metal-organic framework constructed from a flexible linker is shown to possess the capability of separating mixtures of polar compounds by exploiting the differences in the saturation capacities of the constituents. The separation possibilities with the flexible MOF include mixtures of propanol isomers, and various azeotropes. Transient breakthrough simulations show that these sorption-based separations are in favor of the component with higher saturation capacity.

  5. Metal-organic framework templated inorganic sorbents for rapid and efficient extraction of heavy metals.

    PubMed

    Abney, C W; Gilhula, J C; Lu, K; Lin, W

    2014-12-17

    An innovative wet-treatment with Na2 S transforms two indium metal-organic frameworks (MOFs) into a series of porous inorganic sorbents. These MOF-templated materials display remarkable affinity for heavy metals with saturation occurring in less than 1 h. The saturation capacity for Hg(II) exceeds 2 g g(-1) , more than doubling the best thiol-functionalized sorbents in the literature.

  6. Biomimetic Replication of Microscopic Metal-Organic Framework Patterns Using Printed Protein Patterns.

    PubMed

    Liang, Kang; Carbonell, Carlos; Styles, Mark J; Ricco, Raffaele; Cui, Jiwei; Richardson, Joseph J; Maspoch, Daniel; Caruso, Frank; Falcaro, Paolo

    2015-12-02

    It is demonstrated that metal-organic frameworks (MOFs) can be replicated in a biomimetic fashion from protein patterns. Bendable, fluorescent MOF patterns are formed with micrometer resolution under ambient conditions. Furthermore, this technique is used to grow MOF patterns from fingerprint residue in 30 s with high fidelity. This technique is not only relevant for crime-scene investigation, but also for biomedical applications.

  7. A Look into PNNL’s New Way of Making Metal Organic Framework Materials (MOFs)

    SciTech Connect

    2016-07-25

    Metal organic framework materials are used in many energy-efficient and green technologies. PNNL researchers may bring their commercial use a step closer to reality by developing a new way to create these materials in larger quantities, better qualities, and more quickly than ever before. This video is a step-by-step look at how our PNNL scientists create MOFs with 80% efficacy.

  8. One-pot synthesis of protein-embedded metal-organic frameworks with enhanced biological activities.

    PubMed

    Lyu, Fengjiao; Zhang, Yifei; Zare, Richard N; Ge, Jun; Liu, Zheng

    2014-10-08

    Protein molecules were directly embedded in metal-organic frameworks (MOFs) by a coprecipitation method. The protein molecules majorly embedded on the surface region of MOFs display high biological activities. As a demonstration of the power of such materials, the resulting Cyt c embedded in ZIF-8 showed a 10-fold increase in peroxidase activity compared to free Cyt c in solution and thus gave convenient, fast, and highly sensitive detection of trace amounts of explosive organic peroxides in solution.

  9. Controlled Encapsulation of Functional Organic Molecules within Metal-Organic Frameworks: In Situ Crystalline Structure Transformation.

    PubMed

    Guan, Jinju; Hu, Yu; Wang, Yu; Li, Hongfeng; Xu, Zhiling; Zhang, Tao; Wu, Peng; Zhang, Suoying; Xiao, Gengwu; Ji, Wenlan; Li, Linjie; Zhang, Meixuan; Fan, Yun; Li, Lin; Zheng, Bing; Zhang, Weina; Huang, Wei; Huo, Fengwei

    2017-01-23

    Functional organic molecules/metal-organic frameworks composites can be obtained by in situ crystalline structure transformation from ZIF-L to ZIF-8-L under double solvent conditions. Interestingly, the as-prepared molecules/ZIF-8-L composites with the leaf-like morphology exhibit good fluorescence properties and size selectivity in fluorescent quenchers due to the molecular sieving effect of the well-defined microporous ZIF-8-L.

  10. Planar Heterojunction Perovskite Solar Cells Incorporating Metal-Organic Framework Nanocrystals.

    PubMed

    Chang, Ting-Hsiang; Kung, Chung-Wei; Chen, Hsin-Wei; Huang, Tzu-Yen; Kao, Sheng-Yuan; Lu, Hsin-Che; Lee, Min-Han; Boopathi, Karunakara Moorthy; Chu, Chih-Wei; Ho, Kuo-Chuan

    2015-11-25

    Zr-based porphyrin metal-organic framework (MOF-525) nanocrystals with a crystal size of about 140 nm are synthesized and incorporated into perovskite solar cells. The morphology and crystallinity of the perovskite thin film are enhanced since the micropores of MOF-525 allow the crystallization of perovskite to occur inside; this observation results in a higher cell efficiency of the obtained MOF/perovskite solar cell.

  11. Surfactant-thermal method to prepare two new cobalt metal-organic frameworks

    SciTech Connect

    Yu, Xianglin; Toh, Yong Siang; Zhao, Jun; Nie, Lina; Ye, Kaiqi; Wang, Yue; Li, Dongsheng; Zhang, Qichun

    2015-12-15

    Employing surfactants as reaction media, two new metal-organic frameworks (MOFs):(HTEA){sub 3}[Co{sub 3}(BTC){sub 3}] (NTU-Z33) and (HTEA)[Co{sub 3}(HBTC){sub 2}(BTC)] (NTU-Z34) (H{sub 3}BTC=1,3,5-benzenetricarboxylic acid, TEA=trimethylamine, and NTU=Nanyang Technological University), have been successfully synthesized and fully characterized. Note that NTU-Z33 has an unusual trimeric [Co{sub 3}(COO){sub 9}] secondary building unit (SBU). Magnetic characterization suggests that both compounds have weak antiferromagnetic behaviors. Our success in preparing new crystalline Co-BTC based MOFs under different surfactant media could provide a new road to prepare new diverse MOFs through various combinations of surfactants. - Graphical abstract: Employing surfactants as reaction media, two new metal-organic frame-works (MOFs) have been successfully synthesized and magnetic study suggests that both compounds have weak antiferromagnetic behaviors. - Highlights: • Two novel metal-organic frame-works (MOFs). • Synthesis through surfactant-thermal condition. • weak antiferromagnetic behaviors for both compounds.

  12. Synthesis, structures, and properties of two three-dimensional metal-organic frameworks, based on concurrent ligand extension.

    PubMed

    Shi, Dabin; Ren, Yanwei; Jiang, Huanfeng; Cai, Bowei; Lu, Jiaxian

    2012-06-18

    A tritopic carboxylate ligand, tris(4'-carboxybiphenyl)amine (L-H(3)), has been synthesized and applied in the construction of microporous metal-organic frameworks (MOFs). Two novel metal-organic frameworks (MOFs), {[Zn(2)(L)(OH)]·2DMF·H(2)O}(∞) (1) and {[Cu(L-H)(DMA)]·DMA·2H(2)O}(∞) (2), have been constructed out of L-H(3), Zn(2+), and Cu(2+), respectively. 1 has a 2-fold interpenetrating three-dimensional framework formed by L connectors and the [Zn(2)(CO(2))(3)] secondary building units (SBUs). As for 1, it is worth pointing out that one μ(2)-OH group links two Zn atoms between two neighboring SBUs to produce interesting Zn-O-Zn zigzag chains in the structure. 2 has a two-dimensional grid sheet formed by L-H connectors and the typical paddle-wheel [Cu(2)(CO(2))(4)] SBUs. Two-dimensional (2D) sheets nest with each other, which finally forms a three-dimensional (3D) nested framework. Two MOFs are characterized by infrared (IR) spectroscopy, thermogravimetry, single-crystal and elemental analyses, and powder X-ray diffraction methods. Framework 1' exhibits high permanent porosity (Langmuir surface area = 848 m(2)/g), high thermal stability (up to 450 °C), highly active properties for Friedel-Crafts alkylation reaction, as well as the potential application for the CO(2) gas storage and luminescent material. The catalytic results reveal that 2' is indeed an efficient heterogeneous catalyst for olefin epoxidation reactions.

  13. Experimental and theoretical investigations of the electronic band structure of metal-organic frameworks of HKUST-1 type

    SciTech Connect

    Gu, Zhi-Gang; Heinke, Lars Wöll, Christof; Neumann, Tobias; Wenzel, Wolfgang; Li, Qiang; Fink, Karin; Gordan, Ovidiu D.; Zahn, Dietrich R. T.

    2015-11-02

    The electronic properties of metal-organic frameworks (MOFs) are increasingly attracting the attention due to potential applications in sensor techniques and (micro-) electronic engineering, for instance, as low-k-dielectric in semiconductor technology. Here, the band gap and the band structure of MOFs of type HKUST-1 are studied in detail by means of spectroscopic ellipsometry applied to thin surface-mounted MOF films and by means of quantum chemical calculations. The analysis of the density of states, the band structure, and the excitation spectrum reveal the importance of the empty Cu-3d orbitals for the electronic properties of HKUST-1. This study shows that, in contrast to common belief, even in the case of this fairly “simple” MOF, the excitation spectra cannot be explained by a superposition of “intra-unit” excitations within the individual building blocks. Instead, “inter-unit” excitations also have to be considered.

  14. A Water-Stable Metal-Organic Framework for Highly Sensitive and Selective Sensing of Fe(3+) Ion.

    PubMed

    Hou, Bing-Lei; Tian, Dan; Liu, Jiang; Dong, Long-Zhang; Li, Shun-Li; Li, Dong-Sheng; Lan, Ya-Qian

    2016-10-17

    A new metal-organic framework [Zn5(hfipbb)4(trz)2(H2O)2] (NNU-1) [H2hfipbb = 4,4'-(hexafluoroisopropylidene)bis(benzoic acid), Htrz = 1H-1,2,3-triazole] was assembled by hydrothermal synthesis. Single-crystal X-ray diffraction analysis reveals that NNU-1 displays a twofold interpenetrating three-dimensional (3D) framework with a {4(24)·6(4)}-bcu topology. Interestingly, the 3D framework contains a two-dimensional (2D) layered structure that consists of alternating left- and right-handed double helical chains. On the basis of the hydrophobic -CF3 groups from H2hfipbb ligand, NNU-1 possesses excellent stability in water. It is worth noting that NNU-1 not only shows a highly selective fluorescence quenching effect to Fe(3+) ion in aqueous solution but also resists the interference of other metals including Fe(2+) ion. Accordingly, NNU-1 probably functions as a potential promising fluorescence sensor for detecting Fe(3+) ion with high sensitivity and selectivity.

  15. Barcoded materials based on photoluminescent hybrid system of lanthanide ions-doped metal organic framework and silica via ion exchange.

    PubMed

    Shen, Xiang; Yan, Bing

    2016-04-15

    A multicolored photoluminescent hybrid system based on lanthanide ions-doped metal organic frameworks/silica composite host has potential in display and barcode applications. By controlling the stoichiometry of the lanthanides via cation exchange, proportional various lanthanide ions are successfully introduced into metal organic frameworks, whose emission intensity is correspondingly proportional to its amount. The resulting luminescent barcodes depend on the lanthanide ions ratios and compositions. Subsequently, the lanthanide ions located in the channels of metal organic frameworks are protected from any interaction with the environment after the modification of silica on the surface. The optical and thermal stability of the hybrid materials are improved for technological application.

  16. Flexibility in metal-organic framework materials: Impact on sorption properties

    NASA Astrophysics Data System (ADS)

    Fletcher, Ashleigh J.; Thomas, K. Mark; Rosseinsky, Matthew J.

    2005-08-01

    Recent years have seen the development of a new class of porous coordination polymers known collectively as metal organic framework materials (MOFs). This review outlines recent progress in understanding how adsorption characteristics of these systems differ from rigid classical sorbents such as activated carbon and zeolites. Gas/vapor adsorption studies for characterization of the porous structures of MOF materials are reviewed and differences in adsorption characteristics based on detailed measurement of equilibrium and dynamical sorption behavior, compared with previous generations of sorbents, are highlighted. The role of framework flexibility and specific structural features, such as windows and pore cavities, within the MOF porous structures are discussed in relation to adsorption mechanisms.

  17. Metal-organic frameworks for the storage and delivery of biologically active hydrogen sulfide

    SciTech Connect

    Allan, Phoebe K; Wheatley, Paul S; Aldous, David; Mohideen, M Infas; Tang, Chiu; Hriljac, Joseph A; Megson, Ian L; Chapman, Karena W; De Weireld, Guy; Vaesen, Sebastian; Morris, Russell E

    2012-04-02

    Hydrogen sulfide is an extremely toxic gas that is also of great interest for biological applications when delivered in the correct amount and at the desired rate. Here we show that the highly porous metal-organic frameworks with the CPO-27 structure can bind the hydrogen sulfide relatively strongly, allowing the storage of the gas for at least several months. Delivered gas is biologically active in preliminary vasodilation studies of porcine arteries, and the structure of the hydrogen sulfide molecules inside the framework has been elucidated using a combination of powder X-ray diffraction and pair distribution function analysis.

  18. Microporous sensor: gas sorption, guest exchange and guest-dependant luminescence of metal-organic framework.

    PubMed

    Sapchenko, Sergey A; Samsonenko, Denis G; Dybtsev, Danil N; Melgunov, Maxim S; Fedin, Vladimir P

    2011-03-14

    Zn(II)-containing metal-organic framework (MOF) [Zn(4)(dmf)(ur)(2)(ndc)(4)] (ndc(2-) = 2,6-naphtalenedicarboxylate, ur = urotropin, dmf = N,N'-dimethylformamide) was synthesized and characterized by X-ray crystallography and gas sorption analysis. Host MOF retains its crystallinity after guest removal and exchange. Single-crystal to single-crystal formation of different host-guest systems with benzene and ferrocene was investigated. Interesting guest-depended luminescence properties of the porous host framework were observed.

  19. Nonlinear optical properties of Pb-La metal-organic chelidamic acid frameworks

    NASA Astrophysics Data System (ADS)

    Tan, Min; Chen, Ruiqi; Yang, Sanjun; Liu, Qiming

    2017-04-01

    Chelidamic acid, acting as ligands, reacted with metal cation of lead and lanthanum. Both of them were dissolved in water and resulted in novel MOFs complexes by using solvothermal synthesis method. The complexes were characterized by the X-ray diffraction, UV-vis spectrophotometer and Z-scan measurements to investigate their morphology and optical properties. The Z-scan measurements indicated that the obtained lead metal-organic chelidamic acid frameworks showed 6.09 × 10-12 esu of χ(3). The special structure and properties, especially the empty f-electron orbital of the rare earth elements, were used to enhance optical nonlinearity. Using one-step solvothermal synthesis method, we added lanthanum into the lead-chelidamic acid metal organic complexes. By changing the spatial configuration of the ligand in the self-assembly process, novel structural complex metals of the lead-lanthanum metal-organic chelidamic acid frameworks have been successfully synthetized, and the third-order nonlinear susceptibility of χ(3)was enhanced to be 1.13 × 10-11 esu.

  20. Computational studies of adsorption in metal organic frameworks and interaction of nanoparticles in condensed phases

    SciTech Connect

    Annapureddy, Harsha V.; Motkuri, Radha K.; Nguyen, Phuong T.; Truong, T. B.; Thallapally, Praveen K.; McGrail, B. Peter; Dang, Liem X.

    2014-01-08

    In this review, we describe recent efforts in which computer simulations were used to systematically study nano-structured metal organic frameworks, with particular emphasis on their application in heating and cooling processes. These materials also are known as metal organic heat carriers. We used both molecular dynamics and Grand Canonical Monte Carlo simulation techniques to gain a molecular-level understanding of the adsorption mechanism of gases in these porous materials. We investigated the uptake of various gases such as refrigerants R12 and R143a and also the elemental gases Xe and Rn by the metal organic framework (i.e., Ni2(dhtp)). We also evaluated the effects of temperature and pressure on the uptake mechanism. Our computed results compared reasonably well with available experimental measurements, thus validating our potential models and approaches. In addition, we also investigated the structural, diffusive, and adsorption properties of different hydrocarbons in Ni2(dhtp). To elucidate the mechanism of nanoparticle dispersion in condensed phases, we also studied the interactions among nanoparticles in various liquids, such as n-hexane, water and methanol. This work was performed at Pacific Northwest National Laboratory (PNNL) and was supported by the Division of Chemical Sciences, Geosciences and Biosciences, Office of Basic Energy Sciences, U.S. Department of Energy (DOE). PNNL is operated by Battelle for the DOE. The authors also gratefully acknowledge support received from the National Energy Technology Laboratory of DOE's Office of Fossil Energy.

  1. Template-Directed Approach Towards the Realization of Ordered Heterogeneity in Bimetallic Metal-Organic Frameworks.

    PubMed

    Kim, Daeok; Coskun, Ali

    2017-03-29

    Controlling the arrangement of different metal ions to achieve ordered heterogeneity in metal-organic frameworks (MOFs) has been a great challenge. Herein, we introduce a template-directed approach, in which a 1D metal-organic polymer incorporating well-defined binding pockets for the secondary metal ions used as a structural template and starting material for the preparation of well-ordered bimetallic MOF-74s under heterogeneous-phase hydrothermal reaction conditions in the presence of secondary metal ions such as Ni(2+) and Mg(2+) in 3 h. The resulting bimetallic MOF-74s were found to possess a nearly 1:1 metal ratio regardless of their initial stoichiometry in the reaction mixture, thus demonstrating the possibility of controlling the arrangement of metal ions within the secondary building blocks in MOFs to tune their intrinsic properties such as gas affinity.

  2. Doping of Metal-Organic Frameworks with Functional Guest Molecules and Nanoparticles

    NASA Astrophysics Data System (ADS)

    Schröder, Felicitas; Fischer, Roland A.

    Nanoparticle synthesis within metal-organic frameworks (MOFs) is performed by the adsorption of suitable precursor molecules for the metal component and subsequent decomposition to the composite materials nanoparticles@MOF. This chapter will review different approaches of loading MOFs with more complex organic molecules and metal-organic precursor molecules. The related reactions inside MOFs are discussed with a focus on stabilizing reactive intermediates in the corresponding cavities. The syntheses of metal and metal oxide nanoparticles inside MOFs are reviewed, and different synthetic routes compared. Emphasis is placed on the micro structural characterization of the materials nanoparticles@MOF with a particular focus on the location of embedded nanoparticles using TEM methods. Some first examples of applications of the doped MOFs in heterogeneous catalysis and hydrogen storage are described.

  3. Computational studies of adsorption in metal organic frameworks and interaction of nanoparticles in condensed phases

    SciTech Connect

    Annapureddy, HVR; Motkuri, RK; Nguyen, PTM; Truong, TB; Thallapally, PK; McGrail, BP; Dang, LX

    2014-02-05

    In this review, we describe recent efforts to systematically study nano-structured metal organic frameworks (MOFs), also known as metal organic heat carriers, with particular emphasis on their application in heating and cooling processes. We used both molecular dynamics and grand canonical Monte Carlo simulation techniques to gain a molecular-level understanding of the adsorption mechanism of gases in these porous materials. We investigated the uptake of various gases such as refrigerants R12 and R143a. We also evaluated the effects of temperature and pressure on the uptake mechanism. Our computed results compared reasonably well with available measurements from experiments, thus validating our potential models and approaches. In addition, we investigated the structural, diffusive and adsorption properties of different hydrocarbons in Ni-2(dhtp). Finally, to elucidate the mechanism of nanoparticle dispersion in condensed phases, we studied the interactions among nanoparticles in various liquids, such as n-hexane, water and methanol.

  4. Quasi-3D Algorithm in Multi-scale Modeling Framework

    NASA Astrophysics Data System (ADS)

    Jung, J.; Arakawa, A.

    2008-12-01

    As discussed in the companion paper by Arakawa and Jung, the Quasi-3D (Q3D) Multi-scale Modeling Framework (MMF) is a 4D estimation/prediction framework that combines a GCM with a 3D anelastic vector vorticity equation model (VVM) applied to a Q3D network of horizontal grid points. This paper presents an outline of the recently revised Q3D algorithm and a highlight of the results obtained by application of the algorithm to an idealized model setting. The Q3D network of grid points consists of two sets of grid-point arrays perpendicular to each other. For a scalar variable, for example, each set consists of three parallel rows of grid points. Principal and supplementary predictions are made on the central and the two adjacent rows, respectively. The supplementary prediction is to allow the principal prediction be three-dimensional at least to the second-order accuracy. To accommodate a higher-order accuracy and to make the supplementary predictions formally three-dimensional, a few rows of ghost points are added at each side of the array. Values at these ghost points are diagnostically determined by a combination of statistical estimation and extrapolation. The basic structure of the estimation algorithm is determined in view of the global stability of Q3D advection. The algorithm is calibrated using the statistics of past data at and near the intersections of the two sets of grid- point arrays. Since the CRM in the Q3D MMF extends beyond individual GCM boxes, the CRM can be a GCM by itself. However, it is better to couple the CRM with the GCM because (1) the CRM is a Q3D CRM based on a highly anisotropic network of grid points and (2) coupling with a GCM makes it more straightforward to inherit our experience with the conventional GCMs. In the coupled system we have selected, prediction of thermdynamic variables is almost entirely done by the Q3D CRM with no direct forcing by the GCM. The coupling of the dynamics between the two components is through mutual

  5. Design and construction of porous metal-organic frameworks based on flexible BPH pillars

    SciTech Connect

    Hao, Xiang-Rong; Yang, Guang-sheng; Shao, Kui-Zhan; Su, Zhong-Min; Yuan, Gang; Wang, Xin-Long

    2013-02-15

    Three metal-organic frameworks (MOFs), [Co{sub 2}(BPDC){sub 2}(4-BPH){center_dot}3DMF]{sub n} (1), [Cd{sub 2}(BPDC){sub 2}(4-BPH){sub 2}{center_dot}2DMF]{sub n} (2) and [Ni{sub 2}(BDC){sub 2}(3-BPH){sub 2} (H{sub 2}O){center_dot}4DMF]{sub n} (3) (H{sub 2}BPDC=biphenyl-4,4 Prime -dicarboxylic acid, H{sub 2}BDC=terephthalic acid, BPH=bis(pyridinylethylidene)hydrazine and DMF=N,N Prime -dimethylformamide), have been solvothermally synthesized based on the insertion of heterogeneous BPH pillars. Framework 1 has 'single-pillared' MOF-5-like motif with inner cage diameters of up to 18.6 A. Framework 2 has 'double pillared' MOF-5-like motif with cage diameters of 19.2 A while 3 has 'double pillared' 8-connected framework with channel diameters of 11.0 A. Powder X-ray diffraction (PXRD) shows that 3 is a dynamic porous framework. - Graphical abstract: By insertion of flexible BPH pillars based on 'pillaring' strategy, three metal-organic frameworks are obtained showing that the porous frameworks can be constructed in a much greater variety. Highlights: Black-Right-Pointing-Pointer Frameworks 1 and 2 have MOF-5 like motif. Black-Right-Pointing-Pointer The cube-like cages in 1 and 2 are quite large, comparable to the IRMOF-10. Black-Right-Pointing-Pointer Framework 1 is 'single-pillared' mode while 2 is 'double-pillared' mode. Black-Right-Pointing-Pointer PXRD and gas adsorption analysis show that 3 is a dynamic porous framework.

  6. A pillar-layered metal-organic framework as luminescent sensor for selective and reversible response of chloroform

    NASA Astrophysics Data System (ADS)

    Wang, Kun; Li, Shuni; Jiang, Yucheng; Hu, Mancheng; Zhai, Quan-Guo

    2017-03-01

    A new 3D metal-organic framework, namely, {Zn4(H2BPTC)2(HCOO)4}n (SNNU-1, H4BPTC=biphenyl-3,3',5,5'-tetracarboxylic acid, SNNU=Shaanxi Normal University) has been solvothermal synthesized. Four independent tetrahedral Zn atoms are connected by organic ligands to form a 2D Zn-H2BPTC layer, which is further bridged by in-situ generated HCOO- to give the 3D pillar-layered framework of SNNU-1. Unique Zn and H2BPTC all act as 4-connected nodes leading to a new 4,4,4-connected topological net with point symbol of {4·5·62·82}{4·52·62·8}{52·63·7}. Notably, intense blue emission band is observed for SNNU-1, which exhibits solvent-dependent effect. Compared to other common organic solvents, chloroform can specially improve the photoluminescent intensity of SNNU-1. Further repeated response and release experiments clearly showed that SNNU-1 can act as luminescent sensor for selective and reversible detection of chloroform.

  7. The influence of the enantiomeric ratio of an organic ligand on the structure and chirality of Metal-Organic Frameworks

    PubMed Central

    Burneo, Iván; Stylianou, Kyriakos C.; Imaz, Inhar; Maspoch, Daniel

    2016-01-01

    We have prepared three distinct polyamino acid-based metal-organic frameworks (MOFs) with different chirality and porosity using the same chemistry, by simply modifying the enantiomeric ratio of the chiral organic ligand used. PMID:25253285

  8. Porous molybdenum carbide nano-octahedrons synthesized via confined carburization in metal-organic frameworks for efficient hydrogen production

    PubMed Central

    Wu, Hao Bin; Xia, Bao Yu; Yu, Le; Yu, Xin-Yao; Lou, Xiong Wen (David)

    2015-01-01

    Electrochemical water splitting has been considered as a promising approach to produce clean and sustainable hydrogen fuel. However, the lack of high-performance and low-cost electrocatalysts for hydrogen evolution reaction hinders the large-scale application. As a new class of porous materials with tunable structure and composition, metal-organic frameworks have been considered as promising candidates to synthesize various functional materials. Here we demonstrate a metal-organic frameworks-assisted strategy for synthesizing nanostructured transition metal carbides based on the confined carburization in metal-organic frameworks matrix. Starting from a compound consisting of copper-based metal-organic frameworks host and molybdenum-based polyoxometalates guest, mesoporous molybdenum carbide nano-octahedrons composed of ultrafine nanocrystallites are successfully prepared as a proof of concept, which exhibit remarkable electrocatalytic performance for hydrogen production from both acidic and basic solutions. The present study provides some guidelines for the design and synthesis of nanostructured electrocatalysts. PMID:25758159

  9. Heterogeneity of functional groups in a metal-organic framework displays magic number ratios.

    PubMed

    Sue, Andrew C-H; Mannige, Ranjan V; Deng, Hexiang; Cao, Dennis; Wang, Cheng; Gándara, Felipe; Stoddart, J Fraser; Whitelam, Stephen; Yaghi, Omar M

    2015-05-05

    Multiple organic functionalities can now be apportioned into nanoscale domains within a metal-coordinated framework, posing the following question: how do we control the resulting combination of "heterogeneity and order"? Here, we report the creation of a metal-organic framework, MOF-2000, whose two component types are incorporated in a 2:1 ratio, even when the ratio of component types in the starting solution is varied by an order of magnitude. Statistical mechanical modeling suggests that this robust 2:1 ratio has a nonequilibrium origin, resulting from kinetic trapping of component types during framework growth. Our simulations show how other "magic number" ratios of components can be obtained by modulating the topology of a framework and the noncovalent interactions between component types, a finding that may aid the rational design of functional multicomponent materials.

  10. Extreme carbon dioxide sorption hysteresis in open-channel rigid metal-organic frameworks.

    PubMed

    Bezuidenhout, Charl X; Smith, Vincent J; Bhatt, Prashant M; Esterhuysen, Catharine; Barbour, Leonard J

    2015-02-09

    A systematic study is presented of three closely related microporous metal-organic frameworks the pore dimensions of which vary according to the choice of 4,4'-bipyridyl linker. The tunable linker allows exploration of the effect of increasing pore dimensions on the sorption behavior of the frameworks. The MOFs described capture CO2 under supercritical conditions and continue to sequester the gas under ambient conditions. Gas sorption isotherms for CO2 are compared with thermogravimetric data, and the CO2 molecules in the channels of the frameworks could be modeled using single-crystal X-ray diffraction analysis. Crystallographic data were used to construct a theoretical model based on DFT methods to calculate framework electrostatic potential maps with a view to understanding the nature of the sorbate-sorbent interactions.

  11. Assembly of a metal-organic framework by sextuple intercatenation of discrete adamantane-like cages.

    PubMed

    Kuang, Xiaofei; Wu, Xiaoyuan; Yu, Rongmin; Donahue, James P; Huang, Jinshun; Lu, Can-Zhong

    2010-06-01

    Metal-organic frameworks form a unique class of multifunctional hybrid materials and have myriad applications, including gas storage and catalysis. Their structure is usually achieved through the infinite coordination of metal ions and multidentate organic ligands by means of strong covalent bonds. Threaded molecules such as catenanes and rotaxanes have largely been restricted to comprising components of two-dimensional interlocking rings or polygons. There are very few examples of the catenation of polyhedral cages. Although it has been postulated that the infinite extended architecture can be obtained from the polycatenation of a discrete cage based on such threading, this has not been documented to date. Here we describe an infinite three-dimensional metal-organic framework composed of catenated polyhedral cages, in which the framework is achieved by mechanical interlocking of all of the vertices of the cages. The three-dimensional polycatenated framework shows twofold self-interpenetration in its crystal packing. The penetration of polycatenanes creates nanosized voids into which the Keggin polyoxometalate anions are perfectly accommodated as counteranions.

  12. A hybrid framework for 3D medical image segmentation.

    PubMed

    Chen, Ting; Metaxas, Dimitris

    2005-12-01

    In this paper we propose a novel hybrid 3D segmentation framework which combines Gibbs models, marching cubes and deformable models. In the framework, first we construct a new Gibbs model whose energy function is defined on a high order clique system. The new model includes both region and boundary information during segmentation. Next we improve the original marching cubes method to construct 3D meshes from Gibbs models' output. The 3D mesh serves as the initial geometry of the deformable model. Then we deform the deformable model using external image forces so that the model converges to the object surface. We run the Gibbs model and the deformable model recursively by updating the Gibbs model's parameters using the region and boundary information in the deformable model segmentation result. In our approach, the hybrid combination of region-based methods and boundary-based methods results in improved segmentations of complex structures. The benefit of the methodology is that it produces high quality segmentations of 3D structures using little prior information and minimal user intervention. The modules in this segmentation methodology are developed within the context of the Insight ToolKit (ITK). We present experimental segmentation results of brain tumors and evaluate our method by comparing experimental results with expert manual segmentations. The evaluation results show that the methodology achieves high quality segmentation results with computational efficiency. We also present segmentation results of other clinical objects to illustrate the strength of the methodology as a generic segmentation framework.

  13. Thin Film Thermoelectric Metal-Organic Framework with High Seebeck Coefficient and Low Thermal Conductivity. Supporting Information

    DTIC Science & Technology

    2015-04-28

    0188 3. DATES COVERED (From - To) - UU UU UU UU Approved for public release; distribution is unlimited. Thin Film Thermoelectric Metal -Organic...is demonstrated based on an electrically conducting metal –organic framework (MOF) using the guest@MOF concept. This demonstration opens a new...thermoelectric response, metal organic framework REPORT DOCUMENTATION PAGE 11. SPONSOR/MONITOR’S REPORT NUMBER(S) 10. SPONSOR/MONITOR’S ACRONYM(S

  14. Evaluating metal-organic frameworks for post-combustion carbon dioxide capture via temperature swing adsorption

    SciTech Connect

    Mason, JA; Sumida, K; Herm, ZR; Krishna, R; Long, JR

    2011-08-01

    Two representative metal-organic frameworks, Zn4O(BTB)(2)(BTB3- = 1,3,5-benzenetribenzoate; MOF-177) and Mg-2(dobdc) (dobdc(4-) = 1,4-dioxido-2,5-benzenedicarboxylate; Mg-MOF-74, CPO-27-Mg), are evaluated in detail for their potential use in post-combustion CO2 capture via temperature swing adsorption (TSA). Low-pressure single-component CO2 and N-2 adsorption isotherms were measured every 10 degrees C from 20 to 200 degrees C, allowing the performance of each material to be analyzed precisely. In order to gain a more complete understanding of the separation phenomena and the thermodynamics of CO2 adsorption, the isotherms were analyzed using a variety of methods. With regard to the isosteric heat of CO2 adsorption, Mg-2(dobdc) exhibits an abrupt drop at loadings approaching the saturation of the Mg2+ sites, which has significant implications for regeneration in different industrial applications. The CO2/N-2 selectivities were calculated using ideal adsorbed solution theory (IAST) for MOF-177, Mg-2(dobdc), and zeolite NaX, and working capacities were estimated using a simplified TSA model. Significantly, MOF-177 fails to exhibit a positive working capacity even at regeneration temperatures as high as 200 degrees C, while Mg-2(dobdc) reaches a working capacity of 17.6 wt% at this temperature. Breakthrough simulations were also performed for the three materials, demonstrating the superior performance of Mg-2(dobdc) over MOF-177 and zeolite NaX. These results show that the presence of strong CO2 adsorption sites is essential for a metal-organic framework to be of utility in post-combustion CO2 capture via a TSA process, and present a methodology for the evaluation of new metal-organic frameworks via analysis of single-component gas adsorption isotherms.

  15. A highly stable zeotype mesoporous zirconium metal-organic framework with ultralarge pores.

    SciTech Connect

    Feng, Dawei; Wang, Kecheng; Su, Jie; Liu, Tian-Fu; Park, Jihye; Wei, Zhangwen; Bosch, Mathieu; Yakovenko, Andrey; Zou, Xiaodong; Zhou, Hong-Cai

    2015-01-02

    Through topological rationalization, a zeotype mesoporous Zr-containing metal-organic framework (MOF), namely PCN-777, has been designed and synthesized. PCN-777 exhibits the largest cage size of 3.8nm and the highest pore volume of 2.8cm(3)g(-1) among reported Zr-MOFs. Moreover, PCN-777 shows excellent stability in aqueous environments, which makes it an ideal candidate as a support to incorporate different functional moieties. Through facile internal surface modification, the interaction between PCN-777 and different guests can be varied to realize efficient immobilization

  16. The direct heat measurement of mechanical energy storage metal-organic frameworks.

    PubMed

    Rodriguez, Julien; Beurroies, Isabelle; Loiseau, Thierry; Denoyel, Renaud; Llewellyn, Philip L

    2015-04-07

    In any process, the heat exchanged is an essential property required in its development. Whilst the work related to structural transitions of some flexible metal-organic frameworks (MOFs) has been quantified and linked with potential applications such as molecular springs or shock absorbers, the heat related to such transitions has never been directly measured. This has now been carried out with MIL-53(Al) using specifically devised calorimetry experiments. We project the importance of these heats in devices such as molecular springs or dampers.

  17. Review of Molecular Simulations of Methane Storage in Metal-Organic Frameworks.

    PubMed

    Lee, Seung-Joon; Bae, Youn-Sang

    2016-05-01

    Methane storage in porous materials is one of the hot issues because it can replace dangerous high-pressure compressed natural gas (CNG) tanks in natural gas vehicles. Among the diverse adsorbents, metal-organic frameworks (MOFs) are considered to be promising due to their extremely high surface areas and low crystal densities. Molecular simulation has been considered as an important tool for finding an appropriate MOF for methane storage. We review several important roles of molecular modeling for the studies of methane adsorption in MOFs.

  18. Electrodeposition of WO3 nanoparticles into surface mounted metal-organic framework HKUST-1 thin films.

    PubMed

    Yoo, Hyeonseok; Welle, Alexander; Guo, Wei; Choi, Jinsub; Redel, Engelbert

    2017-03-17

    We describe a novel procedure to fabricate WO3@surface-mounted metal-organic framework (SURMOF) hybrid materials by electrodeposition of WO3 nanoparticles into HKUST-1, also termed Cu3(BTC)2 SURMOFs. These materials have been characterized using x-ray diffraction, time-of-flight secondary ion mass spectrometry, scanning electron microscopy, x-ray photoelectron spectroscopy as well as linear sweep voltammetry. The WO3 semiconductor/SURMOF heterostructures were further tested as hybrid electrodes in their performance for hydrogen evolution reaction from water.

  19. Evaluation of Metal-Organic Frameworks and Porous Polymer Networks for CO2 -Capture Applications.

    PubMed

    Verdegaal, Wolfgang M; Wang, Kecheng; Sculley, Julian P; Wriedt, Mario; Zhou, Hong-Cai

    2016-03-21

    This manuscript presents experimental data for 20 adsorption materials (metal-organic frameworks, porous polymer networks, and Zeolite-5A), including CO2 and N2 isotherms and heat capacities. With input from only experimental data, working capacities per energy for each material were calculated. Furthermore, by running seven different carbon-capture scenarios in which the initial flue-gas composition and process temperature was systematically changed, we present a range of performances for each material and quantify how sensitive each is to these varying parameters. The presented calculations provide researchers with a tool to investigate promising carbon-capture materials more easily and completely.

  20. Synthesis and characterization of two dimensional metal organic framework of cerium with tetraaza macrocyclic

    SciTech Connect

    Bt Safiin, Nurul Atikah; Yarmo, Ambar; Yamin, Bohari M.

    2013-11-27

    A two dimensional metal organic framework containing cerium sufate layers and ethylenediaminium between layers was obtained by refluxing the mixture of cerium sulphate and 5,5,7,12,12,14-hexamethyl-1,4,8,11-tetraazacyclotetradeca-7, 14-diene bromide. The complex was characterized by infrared spectroscopy and microelemental analysis. X-ray study showed that the complex adopts eleven coordination environments about the central atom. Thermogravimetric study showed the removal of water molecules at about 70°C followed by a gradual mass loss until the whole structure collapsed at about 400°C.

  1. A porphyrin-based metal-organic framework as a pH-responsive drug carrier

    NASA Astrophysics Data System (ADS)

    Lin, Wenxin; Hu, Quan; Jiang, Ke; Yang, Yanyu; Yang, Yu; Cui, Yuanjing; Qian, Guodong

    2016-05-01

    A low cytotoxic porphyrin-based metal-organic framework (MOF) PCN-221, which exhibited high PC12 cell viability via 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium (MTT) assay, was selected as an oral drug carrier. Methotrexate (MTX) was chosen as the model drug molecule which was absorbed into inner pores and channels of MOFs by diffusion. PCN-221 showed high drug loading and sustained release behavior under physiological environment without "burst effect". The controlled pH-responsive release of drugs by PCN-221 revealed its promising application in oral drug delivery.

  2. Metal-Organic Frameworks derivatives for improving the catalytic activity of CO oxidation reaction.

    PubMed

    Ji, Wenlan; Xu, Zhiling; Liu, Pengfei; Zhang, Suoying; Zhou, Weiqiang; Li, Hongfeng; Zhang, Tao; Li, Linjie; Lu, Xiaohua; Wu, Jiansheng; Zhang, Weina; Huo, Fengwei

    2017-03-15

    Metal-Organic Frameworks (MOFs) based derivatives have attracted an increasing interest in various research fields. However, most of reported papers mainly focused on the pristine MOFs-based derivatives, and researches on the functional MOFs-based derivatives composites are rare. Here, a simple strategy was reported to design the functional MOFs based derivatives composites by the encapsulation of the metal nanoparticles (MNPs) in MOFs matrixes (MNPs@MOFs) and the high-temperature calcination of MNPs@MOFs composites. The as-prepared MNPs@metal oxide composites with the hierarchical pore structure exhibited excellent catalytic activity and high stability for CO oxidation reaction.

  3. Photochromic metal-organic frameworks: reversible control of singlet oxygen generation.

    PubMed

    Park, Jihye; Feng, Dawei; Yuan, Shuai; Zhou, Hong-Cai

    2015-01-07

    The controlled generation of singlet oxygen is of great interest owing to its potential applications including industrial wastewater treatment, photochemistry, and photodynamic therapy. Two photochromic metal-organic frameworks, PC-PCN and SO-PCN, have been developed. A photochromic reaction has been successfully realized in PC-PCN while maintaining its single crystallinity. In particular, as a solid-state material which inherently integrates the photochromic switch and photosensitizer, SO-PCN has demonstrated reversible control of (1)O2 generation. Additionally, SO-PCN shows catalytic activity towards photooxidation of 1,5-dihydroxynaphthalene.

  4. Metal-organic framework templated synthesis of porous inorganic materials as novel sorbents

    DOEpatents

    Taylor-Pashow, Kathryn M. L.; Lin, Wenbin; Abney, Carter W.

    2017-03-21

    A novel metal-organic framework (MOF) templated process for the synthesis of highly porous inorganic sorbents for removing radionuclides, actinides, and heavy metals is disclosed. The highly porous nature of the MOFs leads to highly porous inorganic sorbents (such as oxides, phosphates, sulfides, etc) with accessible surface binding sites that are suitable for removing radionuclides from high level nuclear wastes, extracting uranium from acid mine drainage and seawater, and sequestering heavy metals from waste streams. In some cases, MOFs can be directly used for removing these metal ions as MOFs are converted to highly porous inorganic sorbents in situ.

  5. Unprecedented selectivity in molecular recognition of carbohydrates by a metal-organic framework.

    PubMed

    Yabushita, Mizuho; Li, Peng; Bernales, Varinia; Kobayashi, Hirokazu; Fukuoka, Atsushi; Gagliardi, Laura; Farha, Omar K; Katz, Alexander

    2016-06-04

    Metal-organic framework (MOF) material NU-1000 adsorbs dimers cellobiose and lactose from aqueous solution, in amounts exceeding 1250 mg gNU-1000(-1) while completely excluding the adsorption of the monomer glucose, even in a competitive mode with cellobiose. The MOF also discriminates between dimers consisting of α and β linkages, showing no adsorption of maltose. Electronic structure calculations demonstrate that key to this selective molecular recognition is the number of favorable CH-π interactions made by the sugar with pyrene units of the MOF.

  6. Experimental comparison of chiral metal-organic framework used as stationary phase in chromatography.

    PubMed

    Xie, Sheng-Ming; Zhang, Mei; Fei, Zhi-Xin; Yuan, Li-Ming

    2014-10-10

    Chiral metal-organic frameworks (MOFs) are a new class of multifunctional material, which possess diverse structures and unusual properties such as high surface area, uniform and permanent cavities, as well as good chemical and thermal stability. Their chiral functionality makes them attractive as novel enantioselective adsorbents and stationary phases in separation science. In this paper, the experimental comparison of a chiral MOF [In₃O(obb)₃(HCO₂)(H₂O)] solvent used as a stationary phase was investigated in gas chromatography (GC), high-performance liquid chromatography (HPLC) and capillary electrochromatography (CEC). The potential relationship between the structure and components of chiral MOFs with their chiral recognition ability and selectivity are presented.

  7. Recent advances in porous polyoxometalate-based metal-organic framework materials.

    PubMed

    Du, Dong-Ying; Qin, Jun-Sheng; Li, Shun-Li; Su, Zhong-Min; Lan, Ya-Qian

    2014-07-07

    Polyoxometalate (POM)-based metal-organic framework (MOF) materials contain POM units and generally generate MOF materials with open networks. POM-based MOF materials, which utilize the advantages of both POMs and MOFs, have received increasing attention, and much effort has been devoted to their preparation and relevant applications over the past few decades. They have good prospects in catalysis owing to the electronic and physical properties of POMs that are tunable by varying constituent elements. In this review, we present recent developments in porous POM-based MOF materials, including their classification, synthesis strategies, and applications, especially in the field of catalysis.

  8. [Synthesis and applications of chiral metal-organic framework in the selective separation of enantiomers].

    PubMed

    Qi, Xiaoyue; Li, Xianjiang; Bai, Yu; Liu, Huwei

    2016-01-01

    Chirality is a universal phenomenon in nature. Chiral separation is vitally important in drug development, agricultural chemistry, pharmacology, environmental science, biology and many other fields. Chiral metal-organic frameworks (MOFs) are a new group of porous materials with special topology and designable pore structures, as well as their high specific surface area, porosity, excellent thermal stability, solvent resistance, etc. Thus, chiral MOFs are promising with various applications in the field of analytical chemistry. This review summarizes the synthesis strategies of chiral MOFs and their applications in the selective separation of enantiomers, as well as related mechanism.

  9. Metal-organic framework biosensor with high stability and selectivity in a bio-mimic environment.

    PubMed

    Wu, Xiao-Qin; Ma, Jian-Gong; Li, Han; Chen, Di-Ming; Gu, Wen; Yang, Guang-Ming; Cheng, Peng

    2015-06-04

    A water-stable copper metal-organic framework (MOF), {[Cu2(HL)2(μ2-OH)2(H2O)5]·H2O}n (1, H2L = 2,5-dicarboxylic acid-3,4-ethylene dioxythiophene), was applied for the electrochemical detection of ascorbic acid (AA) without further post-modification. A glass carbon electrode covered with 1 was used as a biosensor for the simultaneous detection of AA and L-tryptophan (L-Trp) from both a single-component solution and a bio-mimic environment.

  10. Metal-Organic Frameworks for Removal of Xe and Kr from Nuclear Fuel Reprocessing Plants

    SciTech Connect

    Liu, Jian; Thallapally, Praveen K.; Strachan, Denis M.

    2012-08-07

    Removal of Xenon (Xe) and Krypton (Kr) from in parts per million (ppm) levels were demonstrated for the first time using two well known metal-organic frameworks (MOFs), HKUST-1 and Ni/DOBDC. Results of an activated carbon were also included for comparison. Ni/DOBDC has higher Xe/Kr selectivities than those of the activated carbon. Moreover, results show that the Ni/DOBDC and HKUST-1 can selectively adsorb Xe and Kr from air even at 1000 ppm concentration. This shows a promising future for MOFs in a radioactive nuclides separation from spent fuel.

  11. Switching Kr/Xe Selectivity with Temperature in a Metal-Organic Framework

    SciTech Connect

    Fernandez, Carlos A.; Liu, Jian; Thallapally, Praveen K.; Strachan, Denis M.

    2012-05-16

    Krypton (Kr) and xenon (Xe) adsorption on two partially fluorinated metal-organic frameworks (FMOFCu and FMOFZn) with different cavity size and topologies were reported. FMOFCu shows an inversion in sorption selectivity toward Kr at temperatures below 0 C while FMOFZn does not. The 1D microtubes packed along the (101) direction connected through small bottleneck windows in FMOFCu appear to be the reason for this peculiar behavior. The FMOFCu shows an estimated Kr/Xe selectivity of 36 at 0.1 bar.

  12. Efficient photocatalytic degradation of rhodamine 6G with a quantum dot-metal organic framework nanocomposite.

    PubMed

    Kaur, Rajnish; Vellingiri, Kowsalya; Kim, Ki-Hyun; Paul, A K; Deep, Akash

    2016-07-01

    The hybrid structures of metal organic frameworks (MOFs) and nanoparticles may offer the realization of effective photocatalytic materials due to combined benefits of the porous and molecular sieving properties of MOF matrix and the functional characteristics of encapsulated nanoparticles. In this study, cadmium telluride (CdTe) quantum dots (QD) are conjugated with a europium-MOF for the synthesis of a novel nanocomposite material with photocatalytic properties. Successful synthesis of a QD/Eu-MOF nanocomposite was characterized with various spectroscopic and microscopic techniques. This QD/Eu-MOF is found to be an effective catalyst to complete the degradation of Rhodamine 6G dye within 50 min.

  13. Photoactive chiral metal-organic frameworks for light-driven asymmetric α-alkylation of aldehydes.

    PubMed

    Wu, Pengyan; He, Cheng; Wang, Jian; Peng, Xiaojun; Li, Xuezhao; An, Yonglin; Duan, Chunying

    2012-09-12

    Chiral metal-organic frameworks (MOFs) with porous and tunable nature show promise as heterogeneous asymmetric catalysts. Through incorporating the stereoselective organocatalyst L- or D-pyrrolidin-2-ylimidazole (PYI) and a triphenylamine photoredox group into a single framework, we have developed two enantiomeric MOFs, Zn-PYI1 and Zn-PYI2, to prompt the asymmetric α-alkylation of aliphatic aldehydes in a heterogeneous manner. The strong reductive excited state of the triphenylamaine moiety within these MOFs initiated a photoinduced electron transfer, rendering an active intermediate for the α-alkylation. The chiral PYI moieties acted as cooperative organocatalytic active sites to drive the asymmetric catalysis with significant stereoselectivity. Control experiments using the lanthanide-based metal-organic frameworks Ho-TCA and MOF-150, assembled from 4,4',4"-nitrilotribenzoic acid, as catalysts suggested that both the photosensitizer triphenylamine moiety and the chiral organocatalyst D-/L-PYI moiety were necessary for the light-driven α-alkylation reactions. Further investigations demonstrated that the integration of both photocatalyst and asymmetric organocatalyst into a single MOF makes the enantioselection superior to that of simply mixing the corresponding MOFs with the chiral adduct. The easy availability, excellent stereoselectivity, great separability, and individual components fixed with their well-defined porous and repeating structures make the MOF a versatile platform for a new type of tandem catalyst and cooperative catalyst.

  14. Pore surface engineering in a zirconium metal-organic framework via thiol-ene reaction

    NASA Astrophysics Data System (ADS)

    Gui, Bo; Hu, Guiping; Zhou, Tailin; Wang, Cheng

    2015-03-01

    A porous olefin-functionalized Zr(IV)-based metal-organic framework, denoted as UiO-68-allyl, has been constructed. Our results clearly demonstrated that the surface of UiO-68-allyl could be decorated with organic molecule (ethanethiol) via thiol-ene reaction. More importantly, the crystallinity of the framework were maintained during the post-synthetic modification process. However, the microporosity of the framework is retained but the surface area decreased, due to the grafting of ethylthio groups into the pores. From our studies, we can conclude that the strategy of post-synthetic modification of UiO-68-allyl via thiol-ene reaction may be general. Furthermore, we may anchor other desired functional group onto the pore walls in Zr-MOFs via thiol-ene reaction, enabling more potential applications.

  15. Engineering chiral porous metal-organic frameworks for enantioselective adsorption and separation

    NASA Astrophysics Data System (ADS)

    Peng, Yongwu; Gong, Tengfei; Zhang, Kang; Lin, Xiaochao; Liu, Yan; Jiang, Jianwen; Cui, Yong

    2014-07-01

    The separation of racemic molecules is of substantial significance not only for basic science but also for technical applications, such as fine chemicals and drug development. Here we report two isostructural chiral metal-organic frameworks decorated with chiral dihydroxy or -methoxy auxiliares from enantiopure tetracarboxylate-bridging ligands of 1,1‧-biphenol and a manganese carboxylate chain. The framework bearing dihydroxy groups functions as a solid-state host capable of adsorbing and separating mixtures of a range of chiral aromatic and aliphatic amines, with high enantioselectivity. The host material can be readily recycled and reused without any apparent loss of performance. The utility of the present adsorption separation is demonstrated in the large-scale resolution of racemic 1-phenylethylamine. Control experiments and molecular simulations suggest that the chiral recognition and separation are attributed to the different orientations and specific binding energies of the enantiomers in the microenvironment of the framework.

  16. Transformation of metal-organic framework to polymer gel by cross-linking the organic ligands preorganized in metal-organic framework.

    PubMed

    Ishiwata, Takumi; Furukawa, Yuki; Sugikawa, Kouta; Kokado, Kenta; Sada, Kazuki

    2013-04-10

    Until now, seamless fusion of metal-organic frameworks (MOFs) and covalently cross-linked polymer gels (PG) at molecular level has been extremely rare, since these two matters have been regarded as opposite, that is, hard versus soft. In this report, we demonstrate transformation of cubic MOF crystals to PG via inner cross-linking of the organic linkers in the void space of MOF, followed by decomposition of the metal coordination. The obtained PG behaved as a polyelectrolyte gel, indicating the high content of ionic groups inside. Metal ions were well adsorbed in the PG due to its densely packed carboxylate groups. A chimera-type hybrid material consisting of MOF and PG was obtained by partial hydrolysis of resulting cross-linked MOF. The shape of resulting PG network well reflected the crystal structure of MOF employed as a template. Our results will connect the two different network materials that have been ever studied in the two different fields to provide new soft and hard hybrid materials, and the unique copolymerization in the large void space of the MOF will open a new horizon toward "ideal network polymers" never prepared before now.

  17. Tuning the structure, dimensionality and luminescent properties of lanthanide metal-organic frameworks under ancillary ligand influence.

    PubMed

    D'Vries, Richard F; Gomez, German E; Hodak, José H; Soler-Illia, Galo J A A; Ellena, Javier

    2016-01-14

    This manuscript addresses the synthesis, structural characterization and optical properties of a 1D coordination polymer (CPs) and 2D and 3D Metal-Organic Frameworks (MOFs) obtained from lanthanide metals, 3-hydroxinaftalene-2,7-disulfonic acid (3-OHNDS) and two different phenanthroline derivates as ancillary ligands. The first is a family of 2D compounds with formula [Ln(3-OHNDS)(H2O)2], where Ln = La(), Pr(), Nd() and Sm(). The addition of 1,10-phenanthroline (phen) in the reaction produces 1D compounds with general formula [Ln(3-OHNDS)(phen)(H2O)]·3H2O, where Ln = La(), Pr(), Nd() and Sm(). Finally, the synthesis with 3,4,7,8-tetramethyl-1,10-phenanthroline (3,4,7,8-TMPhen) as an ancillary ligand results in the formation of the 3D [La(3-OHNDS)(3,4,7,8-TMphen)(H2O)] () compound. The photoluminescence (PL) properties of 1D and 2D compounds were fully investigated in comparison with the 3-OHNDS ligand. One of the most important results was the obtaining of a white-light single-emitter without adding dopant atoms in the structure. With all these results in mind it was possible to establish structure-property relationships.

  18. Metal organic framework derived magnetically separable 3-dimensional hierarchical Ni@C nanocomposites: Synthesis and adsorption properties

    NASA Astrophysics Data System (ADS)

    Song, Yixuan; Qiang, Tingting; Ye, Ming; Ma, Qiuyang; Fang, Zhen

    2015-12-01

    Design an effective absorbent that has high surface area, and perfect recyclable is imperative for pollution elimination. Herein, we report a facile two-step strategy to fabricate magnetically separable 3-dimensional (3D) hierarchical carbon-coated nickel (Ni@C) nanocomposites by calcinating nickel based metal organic framework (Ni3(OH)2(C8H4O4)2(H2O)4). SEM and TEM images illuminate that the nanocomposites were constructed by 8 nm nickel nanoparticle encapsulated in 3D flake like carbon. The specific surface area of the obtained nanocomposites is up to 120.38 m2 g-1. Room temperature magnetic measurement indicates the nanocomposites show soft magnetism property, which endows the nanocomposites with an ideal fast magnetic separable property. The maximum adsorption capacity of the nanocomposites for rhodamine B is 84.5 mg g-1. Furthermore, the nanocomposites also exhibit a high adsorption capacity for heavy metal ions. The adsorbent can be very easily separated from the solution by using a common magnet without exterior energy. The as-prepared Ni@C nanocomposites can apply in waste water treatment on a large-scale as a new adsorbent with high efficiency and excellent recyclability.

  19. Metal-organic framework with optimally selective xenon adsorption and separation

    NASA Astrophysics Data System (ADS)

    Banerjee, Debasis; Simon, Cory M.; Plonka, Anna M.; Motkuri, Radha K.; Liu, Jian; Chen, Xianyin; Smit, Berend; Parise, John B.; Haranczyk, Maciej; Thallapally, Praveen K.

    2016-06-01

    Nuclear energy is among the most viable alternatives to our current fossil fuel-based energy economy. The mass deployment of nuclear energy as a low-emissions source requires the reprocessing of used nuclear fuel to recover fissile materials and mitigate radioactive waste. A major concern with reprocessing used nuclear fuel is the release of volatile radionuclides such as xenon and krypton that evolve into reprocessing facility off-gas in parts per million concentrations. The existing technology to remove these radioactive noble gases is a costly cryogenic distillation; alternatively, porous materials such as metal-organic frameworks have demonstrated the ability to selectively adsorb xenon and krypton at ambient conditions. Here we carry out a high-throughput computational screening of large databases of metal-organic frameworks and identify SBMOF-1 as the most selective for xenon. We affirm this prediction and report that SBMOF-1 exhibits by far the highest reported xenon adsorption capacity and a remarkable Xe/Kr selectivity under conditions pertinent to nuclear fuel reprocessing.

  20. Trapping gases in metal-organic frameworks with a selective surface molecular barrier layer

    NASA Astrophysics Data System (ADS)

    Tan, Kui; Zuluaga, Sebastian; Fuentes, Erika; Mattson, Eric C.; Veyan, Jean-François; Wang, Hao; Li, Jing; Thonhauser, Timo; Chabal, Yves J.

    2016-12-01

    The main challenge for gas storage and separation in nanoporous materials is that many molecules of interest adsorb too weakly to be effectively retained. Instead of synthetically modifying the internal surface structure of the entire bulk--as is typically done to enhance adsorption--here we show that post exposure of a prototypical porous metal-organic framework to ethylenediamine can effectively retain a variety of weakly adsorbing molecules (for example, CO, CO2, SO2, C2H4, NO) inside the materials by forming a monolayer-thick cap at the external surface of microcrystals. Furthermore, this capping mechanism, based on hydrogen bonding as explained by ab initio modelling, opens the door for potential selectivity. For example, water molecules are shown to disrupt the hydrogen-bonded amine network and diffuse through the cap without hindrance and fully displace/release the retained small molecules out of the metal-organic framework at room temperature. These findings may provide alternative strategies for gas storage, delivery and separation.

  1. Trapping gases in metal-organic frameworks with a selective surface molecular barrier layer

    PubMed Central

    Tan, Kui; Zuluaga, Sebastian; Fuentes, Erika; Mattson, Eric C.; Veyan, Jean-François; Wang, Hao; Li, Jing; Thonhauser, Timo; Chabal, Yves J.

    2016-01-01

    The main challenge for gas storage and separation in nanoporous materials is that many molecules of interest adsorb too weakly to be effectively retained. Instead of synthetically modifying the internal surface structure of the entire bulk—as is typically done to enhance adsorption—here we show that post exposure of a prototypical porous metal-organic framework to ethylenediamine can effectively retain a variety of weakly adsorbing molecules (for example, CO, CO2, SO2, C2H4, NO) inside the materials by forming a monolayer-thick cap at the external surface of microcrystals. Furthermore, this capping mechanism, based on hydrogen bonding as explained by ab initio modelling, opens the door for potential selectivity. For example, water molecules are shown to disrupt the hydrogen-bonded amine network and diffuse through the cap without hindrance and fully displace/release the retained small molecules out of the metal-organic framework at room temperature. These findings may provide alternative strategies for gas storage, delivery and separation. PMID:27958274

  2. Metal-organic framework with optimally selective xenon adsorption and separation.

    PubMed

    Banerjee, Debasis; Simon, Cory M; Plonka, Anna M; Motkuri, Radha K; Liu, Jian; Chen, Xianyin; Smit, Berend; Parise, John B; Haranczyk, Maciej; Thallapally, Praveen K

    2016-06-13

    Nuclear energy is among the most viable alternatives to our current fossil fuel-based energy economy. The mass deployment of nuclear energy as a low-emissions source requires the reprocessing of used nuclear fuel to recover fissile materials and mitigate radioactive waste. A major concern with reprocessing used nuclear fuel is the release of volatile radionuclides such as xenon and krypton that evolve into reprocessing facility off-gas in parts per million concentrations. The existing technology to remove these radioactive noble gases is a costly cryogenic distillation; alternatively, porous materials such as metal-organic frameworks have demonstrated the ability to selectively adsorb xenon and krypton at ambient conditions. Here we carry out a high-throughput computational screening of large databases of metal-organic frameworks and identify SBMOF-1 as the most selective for xenon. We affirm this prediction and report that SBMOF-1 exhibits by far the highest reported xenon adsorption capacity and a remarkable Xe/Kr selectivity under conditions pertinent to nuclear fuel reprocessing.

  3. Made-to-order metal-organic frameworks for trace carbon dioxide removal and air capture.

    PubMed

    Shekhah, Osama; Belmabkhout, Youssef; Chen, Zhijie; Guillerm, Vincent; Cairns, Amy; Adil, Karim; Eddaoudi, Mohamed

    2014-06-25

    Direct air capture is regarded as a plausible alternate approach that, if economically practical, can mitigate the increasing carbon dioxide emissions associated with two of the main carbon polluting sources, namely stationary power plants and transportation. Here we show that metal-organic framework crystal chemistry permits the construction of an isostructural metal-organic framework (SIFSIX-3-Cu) based on pyrazine/copper(II) two-dimensional periodic 4(4) square grids pillared by silicon hexafluoride anions and thus allows further contraction of the pore system to 3.5 versus 3.84 Å for the parent zinc(II) derivative. This enhances the adsorption energetics and subsequently displays carbon dioxide uptake and selectivity at very low partial pressures relevant to air capture and trace carbon dioxide removal. The resultant SIFSIX-3-Cu exhibits uniformly distributed adsorption energetics and offers enhanced carbon dioxide physical adsorption properties, uptake and selectivity in highly diluted gas streams, a performance, to the best of our knowledge, unachievable with other classes of porous materials.

  4. The modulator driven polymorphism of Zr(IV) based metal-organic frameworks

    NASA Astrophysics Data System (ADS)

    Drache, Franziska; Bon, Volodymyr; Senkovska, Irena; Getzschmann, Jürgen; Kaskel, Stefan

    2017-01-01

    The reaction of ZrCl4 and 2,5-thiophenedicarboxylic acid (H2tdc) in the presence of trifluoroacetic acid (Htfa) as modulator results in the formation of the new metal-organic framework (MOF) named DUT-126 (DUT = Dresden University of Technology). The nature and concentration of modulators are found to be decisive synthetic parameters affecting the topology of the formed product. DUT-126 (hbr) extends the series of polymorphs differing in topology, namely DUT-67 (reo), DUT-68 (bon) and DUT-69 (bct) to four, where DUT-67 and DUT-68 show the same eight-connected secondary building units as in DUT-126. In DUT-126, linker molecules have a peculiar orientation, resulting in hbr topology, which is described for the first time in this work for MOFs. DUT-126 contains three pore types, including two micropores surrounding mesoporous channels. DUT-126 is stable against hydrolysis and features permanent porosity with a specific surface area of 1297 m2 g-1 and a total pore volume of 0.48 cm3 g-1, calculated from the nitrogen physisorption isotherm measured at 77 K. This article is part of the themed issue 'Coordination polymers and metal-organic frameworks: materials by design'.

  5. Made-to-order metal-organic frameworks for trace carbon dioxide removal and air capture

    PubMed Central

    Shekhah, Osama; Belmabkhout, Youssef; Chen, Zhijie; Guillerm, Vincent; Cairns, Amy; Adil, Karim; Eddaoudi, Mohamed

    2014-01-01

    Direct air capture is regarded as a plausible alternate approach that, if economically practical, can mitigate the increasing carbon dioxide emissions associated with two of the main carbon polluting sources, namely stationary power plants and transportation. Here we show that metal-organic framework crystal chemistry permits the construction of an isostructural metal-organic framework (SIFSIX-3-Cu) based on pyrazine/copper(II) two-dimensional periodic 44 square grids pillared by silicon hexafluoride anions and thus allows further contraction of the pore system to 3.5 versus 3.84 Å for the parent zinc(II) derivative. This enhances the adsorption energetics and subsequently displays carbon dioxide uptake and selectivity at very low partial pressures relevant to air capture and trace carbon dioxide removal. The resultant SIFSIX-3-Cu exhibits uniformly distributed adsorption energetics and offers enhanced carbon dioxide physical adsorption properties, uptake and selectivity in highly diluted gas streams, a performance, to the best of our knowledge, unachievable with other classes of porous materials. PMID:24964404

  6. Post Modification of Metal-Organic Framework and Their Application In Cancer Theranostics

    NASA Astrophysics Data System (ADS)

    Lakkakula, Hima bindu

    The research proposal aims to demonstrate that Metal-Organic Frameworks (MOFs) are mainly used for cancer theranostics which is the combination of both diagnostic and therapeutic functions. The research will emphasis on synthesis of Fe- MOFs by solvothermal nucleation, crystallization, characterization by microscopy and spectroscopy and evaluation with different lattice parameters and its morphology. Nowadays MOFs are used for the novel drug delivery purposes. The current published Fe- MOFs research focus is on the cancer theranostics by Indian medicines which will be impregnated into the MOFs and which will evaluate bioavailability and the chemotherapeutic activity of the drug. Nanotechnology provides the target specificity without affecting the healthy tissues. Other research problems to be addressed are the relationship between metal connectivity and ligand-based luminescence, MOF stability in an aqueous environment and activating it at increased temperature serves as a crucial role. The merits of this research are to increase the surface area and pore size of the drug so that the therapeutic efficacy can be improved. Moreover, the stabilization of metal-organic frameworks can also be enhanced with high surface area.

  7. Efficient methods for screening of metal organic framework membranes for gas separations using atomically detailed models.

    PubMed

    Keskin, Seda; Sholl, David S

    2009-10-06

    Metal organic frameworks (MOFs) define a diverse class of nanoporous materials having potential applications in adsorption-based and membrane-based gas separations. We have previously used atomically detailed models to predict the performance of MOFs for membrane-based separations of gases, but these calculations require considerable computational resources and time. Here, we introduce an efficient approximate method for screening MOFs based on atomistic models that will accelerate the modeling of membrane applications. The validity of this approximate method is examined by comparison with detailed calculations for CH4/H2, CO2/CH4, and CO2/H2 mixtures at room temperature permeating through IRMOF-1 and CuBTC membranes. These results allow us to hypothesize a connection between two computationally efficient correlations predicting mixture adsorption and mixture self-diffusion properties and the validity of our approximate screening method. We then apply our model to six additional MOFs, IRMOF-8, -9, -10, and -14, Zn(bdc)(ted)0.5, and COF-102, to examine the effect of chemical diversity and interpenetration on the performance of metal organic framework membranes for light gas separations.

  8. The modulator driven polymorphism of Zr(IV) based metal-organic frameworks.

    PubMed

    Drache, Franziska; Bon, Volodymyr; Senkovska, Irena; Getzschmann, Jürgen; Kaskel, Stefan

    2017-01-13

    The reaction of ZrCl4 and 2,5-thiophenedicarboxylic acid (H2tdc) in the presence of trifluoroacetic acid (Htfa) as modulator results in the formation of the new metal-organic framework (MOF) named DUT-126 (DUT = Dresden University of Technology). The nature and concentration of modulators are found to be decisive synthetic parameters affecting the topology of the formed product. DUT-126 ( HBR: ) extends the series of polymorphs differing in topology, namely DUT-67 ( REO: ), DUT-68 ( BON: ) and DUT-69 ( BCT: ) to four, where DUT-67 and DUT-68 show the same eight-connected secondary building units as in DUT-126. In DUT-126, linker molecules have a peculiar orientation, resulting in HBR: topology, which is described for the first time in this work for MOFs. DUT-126 contains three pore types, including two micropores surrounding mesoporous channels. DUT-126 is stable against hydrolysis and features permanent porosity with a specific surface area of 1297 m(2) g(-1) and a total pore volume of 0.48 cm(3) g(-1), calculated from the nitrogen physisorption isotherm measured at 77 K.This article is part of the themed issue 'Coordination polymers and metal-organic frameworks: materials by design'.

  9. Bi2O3 nanoparticles encapsulated in surface mounted metal-organic framework thin films

    NASA Astrophysics Data System (ADS)

    Guo, Wei; Chen, Zhi; Yang, Chengwu; Neumann, Tobias; Kübel, Christian; Wenzel, Wolfgang; Welle, Alexander; Pfleging, Wilhelm; Shekhah, Osama; Wöll, Christof; Redel, Engelbert

    2016-03-01

    We describe a novel procedure to fabricate a recyclable hybrid-photocatalyst based on Bi2O3@HKUST-1 MOF porous thin films. Bi2O3 nanoparticles (NPs) were synthesized within HKUST-1 (or Cu3(BTC)2) surface-mounted metal-organic frame-works (SURMOFs) and characterized using X-ray diffraction (XRD), a quartz crystal microbalance (QCM) and transmission electron microscopy (TEM). The Bi2O3 semiconductor NPs (diameter 1-3 nm)/SURMOF heterostructures exhibit superior photo-efficiencies compared to NPs synthesized using conventional routes, as demonstrated via the photodegradation of the nuclear fast red (NFR) dye.We describe a novel procedure to fabricate a recyclable hybrid-photocatalyst based on Bi2O3@HKUST-1 MOF porous thin films. Bi2O3 nanoparticles (NPs) were synthesized within HKUST-1 (or Cu3(BTC)2) surface-mounted metal-organic frame-works (SURMOFs) and characterized using X-ray diffraction (XRD), a quartz crystal microbalance (QCM) and transmission electron microscopy (TEM). The Bi2O3 semiconductor NPs (diameter 1-3 nm)/SURMOF heterostructures exhibit superior photo-efficiencies compared to NPs synthesized using conventional routes, as demonstrated via the photodegradation of the nuclear fast red (NFR) dye. Electronic supplementary information (ESI) available. See DOI: 10.1039/c6nr00532b

  10. Monolithic column incorporated with lanthanide metal-organic framework for capillary electrochromatography.

    PubMed

    Zhang, Li-Shun; Du, Pei-Yao; Gu, Wen; Zhao, Qing-Li; Huang, Yan-Ping; Liu, Zhao-Sheng

    2016-08-26

    A new lanthanide metal-organic frameworks NKU-1 have successfully incorporated into poly (BMA-co-EDMA) monolith and evaluated by capillary electrochromatography (CEC). Lanthanide metal-organic frameworks [Eu2(ABTC)1.5(H2O)3(DMA)] (NKU-1) were synthesized by self-assembly of Eu(III) ions and 3,3',5,5'-azo benzene tetracarboxylic acid ligands have been fabricated into poly(BMA-co-EDMA) monoliths. 1-Butyl-3-methylimidazolium tetrafluoroborate and N,N-dimethylformamide were developed as binary porogen obtaining homogeneous dispersibility for NKU-1 and high permeability for monolithic column. The successful incorporation of NKU-1 into poly(BMA-co-EDMA) was confirmed and characterized by FT-IR spectra, scanning electron microscopy, X-ray diffraction, energy dispersive spectrometer area scanning, and transmission electron microscopy. Separation ability of the NKU-1-poly (BMA-co-EDMA) monoliths was demonstrated by separating four groups of analytes in CEC, including alkylbenzenes, polycyclic aromatic hydrocarbon, aniline series and naphthyl substitutes. Compared with bare monolithic (column efficiency of 100,000plates/m), the NKU-1-poly (BMA-co-EDMA) monoliths have displayed greater column efficiency (maximum 210,000plates/m) and higher permeability, as well as less peak tailing. The results showed that the NKU-1-poly (BMA-co-EDMA) monoliths are promising stationary phases for CEC separations.

  11. Metal-organic frameworks post-synthetically modified with ferrocenyl groups: framework effects on redox processes and surface conduction.

    PubMed

    Halls, Jonathan E; Hernán-Gómez, Alberto; Burrows, Andrew D; Marken, Frank

    2012-02-07

    Metal-organic framework (MOF) materials based on zinc(II) and aluminium(III) dicarboxylate frameworks with covalently attached ferrocene functional redox groups were synthesised by post-synthetic modification and investigated by voltammetry in aqueous and non-aqueous media. In the voltammetry experiments, ferrocene oxidation occurs in all cases, but chemically reversible and stable ferrocene oxidation without decay of the voltammetric response requires a "mild" dichloroethane solvent environment. The voltammetric response in this case is identified as "surface-confined" with fast surface-hopping of electrons and without affecting the bulk of MOF microcrystals. In aqueous media a more complex pH-dependent multi-stage redox process is observed associated with chemically irreversible bulk oxidation and disintegration of the MOF framework. A characteristic 30 mV per pH unit dependence of redox potentials is observed attributed to a "framework effect": the hydroxide-driven MOF framework dissolution.

  12. Enhanced ethylene separation and plasticization resistance in polymer membranes incorporating metal-organic framework nanocrystals

    NASA Astrophysics Data System (ADS)

    Bachman, Jonathan E.; Smith, Zachary P.; Li, Tao; Xu, Ting; Long, Jeffrey R.

    2016-08-01

    The implementation of membrane-based separations in the petrochemical industry has the potential to reduce energy consumption significantly relative to conventional separation processes. Achieving this goal, however, requires the development of new membrane materials with greater selectivity, permeability and stability than available at present. Here, we report composite materials consisting of nanocrystals of metal-organic frameworks dispersed within a high-performance polyimide, which can exhibit enhanced selectivity for ethylene over ethane, greater ethylene permeability and improved membrane stability. Our results suggest that framework-polymer interactions reduce chain mobility of the polymer while simultaneously boosting membrane separation performance. The increased stability, or plasticization resistance, is expected to improve membrane utility under real process conditions for petrochemical separations and natural gas purification. Furthermore, this approach can be broadly applied to numerous polymers that encounter aggressive environments, potentially making gas separations possible that were previously inaccessible to membranes.

  13. Carbonization and oxidation of metal-organic frameworks based on 1,4-naphthalene dicarboxylates.

    PubMed

    Chen, Jiun-Jen; Chen, Ya-Ting; Senthil Raja, Duraisamy; Kang, Yu-Hao; Tseng, Pen-Chang; Lin, Chia-Her

    2015-10-01

    Three new isostructural metal-organic frameworks (MOFs), [V(OH)(NDC)] (1), [Cr(OH)(NDC)] (2), and [Ga(OH)(NDC)] (3) have been synthesized hydrothermally using 1,4-naphthalene dicarboxylate (NDC) as the linker. These MOFs (1, 2 and 3) have been used as a template for the synthesis of metal-oxide-inserted nanoporous carbon materials. The newly synthesized MOFs and the resulting porous carbon hybrid functional materials have been characterized using powder x-ray diffraction, scanning electron microscopy, transmission electron microscopy, and energy dispersive x-ray spectroscopic analysis. Results show that compounds 2 and 3 form their respective metal oxide nanoparticles on the surface of the carbon materials during carbonization at 800 °C. The gas sorption properties of the new MOFs and their corresponding carbon frameworks have been reported.

  14. Lithium inclusion in indium metal-organic frameworks showing increased surface area and hydrogen adsorption

    SciTech Connect

    Bosch, Mathieu; Zhang, Muwei; Feng, Dawei; Yuan, Shuai; Wang, Xuan; Chen, Ying-Pin; Zhou, Hong-Cai

    2014-12-01

    Investigation of counterion exchange in two anionic In-Metal-Organic Frameworks (In-MOFs) showed that partial replacement of disordered ammonium cations was achieved through the pre-synthetic addition of LiOH to the reaction mixture. This resulted in a surface area increase of over 1600% in (Li [In(1,3 − BDC){sub 2}]){sub n} and enhancement of the H{sub 2} uptake of approximately 275% at 80 000 Pa at 77 K. This method resulted in frameworks with permanent lithium content after repeated solvent exchange as confirmed by inductively coupled plasma mass spectrometry. Lithium counterion replacement appears to increase porosity after activation through replacement of bulkier, softer counterions and demonstrates tuning of pore size and properties in MOFs.

  15. Communication: Enthalpy relaxation in a metal-organic zeolite imidazole framework (ZIF-4) glass-former.

    PubMed

    Xu, Di; Liu, Yingdan; Tian, Yongjun; Wang, Li-Min

    2017-03-28

    Amorphization in metal-organic framework materials initiated by the collapsed crystal offers new access to glasses; however, the understanding of such glasses remains to be clarified. Here, we studied the glass transition thermodynamics and kinetics in a zeolitic imidazolate framework ZIF-4 utilizing enthalpy relaxation measurements. The calorimetric glass transition profile and relaxation behaviors in ZIF-4 are found to reproduce the basic features and correlations manifested by conventional melt-quenched glasses. A comparison with various melt-quenched glasses suggests that the low fragility of ZIF-4 is ascribed to the low thermal-pressure coefficient due to the directional tetrahedral bond, partly leading to the low vibrational entropy in the melt-crystal entropy difference.

  16. Porous Metal-Organic Frameworks for Gas Storage and Separation: What, How, and Why?

    PubMed

    Li, Bin; Wen, Hui-Min; Zhou, Wei; Chen, Banglin

    2014-10-16

    Metal-organic frameworks (MOFs) have been emerging as promising multifunctional materials and have shown particularly useful applications for gas storage and separation. We have briefly outlined the early development of this very active research field to provide us a clear picture on what are MOFs and how the research endeavor has been initiated and explored. Following that, we have demonstrated why MOFs are so unique for gas storage and separation: high porosities, tunable framework structures, and immobilized functional sites to fully make use of pore space for gas storage, to optimize their sieving effects, and to differentiate their interactions with gas molecules. Finally, we have provided a perspective on further development of porous MOFs for gas storage and separation.

  17. Flexible, Luminescent Metal-Organic Frameworks Showing Synergistic Solid-Solution Effects on Porosity and Sensitivity.

    PubMed

    Liu, Si-Yang; Zhou, Dong-Dong; He, Chun-Ting; Liao, Pei-Qin; Cheng, Xiao-Ning; Xu, Yan-Tong; Ye, Jia-Wen; Zhang, Jie-Peng; Chen, Xiao-Ming

    2016-12-23

    Mixing molecular building blocks in the solid solution manner is a valuable strategy to obtain structures and properties in between the isostructural parent metal-organic frameworks (MOFs). We report nonlinear/synergistic solid-solution effects using highly related yet non-isostructural, phosphorescent Cu(I) triazolate frameworks as parent phases. Near the phase boundaries associated with conformational diversity and ligand heterogeneity, the porosity (+150 %) and optical O2 sensitivity (410 times, limit of detection 0.07 ppm) can be drastically improved from the best-performing parent MOFs and even exceeds the records hold by precious-metal complexes (3 ppm) and C70 (0.2 ppm).

  18. Urea Metal-Organic Frameworks for Nitro-Substituted Compounds Sensing.

    PubMed

    Azhdari Tehrani, Alireza; Esrafili, Leili; Abedi, Sedigheh; Morsali, Ali; Carlucci, Lucia; Proserpio, Davide M; Wang, Jun; Junk, Peter C; Liu, Tianfu

    2017-02-06

    Urea groups are known to form strong hydrogen bonds with molecules containing atom(s) that can act as hydrogen bond acceptor(s). Thus, urea is a particularly interesting building block for designing receptors for neutral or charged guests. In the quest for new sensors with enhanced performance for the detection of nitro-substituted compounds, two pillared metal-organic frameworks containing urea functional groups were synthesized and structurally characterized. The sensing properties of these frameworks toward nitro-analytes were investigated and compared to each other. The study clearly reveals the importance of urea groups orientation inside the pore cavity of MOFs, as well as the supramolecular interactions between the interpenetrated networks. This work is interesting as it represents the first example of urea-functionalized MOFs for nitro-analytes recognition.

  19. Enhanced ethylene separation and plasticization resistance in polymer membranes incorporating metal-organic framework nanocrystals.

    PubMed

    Bachman, Jonathan E; Smith, Zachary P; Li, Tao; Xu, Ting; Long, Jeffrey R

    2016-08-01

    The implementation of membrane-based separations in the petrochemical industry has the potential to reduce energy consumption significantly relative to conventional separation processes. Achieving this goal, however, requires the development of new membrane materials with greater selectivity, permeability and stability than available at present. Here, we report composite materials consisting of nanocrystals of metal-organic frameworks dispersed within a high-performance polyimide, which can exhibit enhanced selectivity for ethylene over ethane, greater ethylene permeability and improved membrane stability. Our results suggest that framework-polymer interactions reduce chain mobility of the polymer while simultaneously boosting membrane separation performance. The increased stability, or plasticization resistance, is expected to improve membrane utility under real process conditions for petrochemical separations and natural gas purification. Furthermore, this approach can be broadly applied to numerous polymers that encounter aggressive environments, potentially making gas separations possible that were previously inaccessible to membranes.

  20. Surface anchored metal-organic frameworks as stimulus responsive antifouling coatings.

    PubMed

    Sancet, Maria Pilar Arpa; Hanke, Maximilian; Wang, Zhengbang; Bauer, Stella; Azucena, Carlos; Arslan, Hasan K; Heinle, Marita; Gliemann, Hartmut; Wöll, Christof; Rosenhahn, Axel

    2013-12-01

    Surface-anchored, crystalline and oriented metal organic frameworks (SURMOFs) have huge potential for biological applications due to their well-defined and highly-porous structure. In this work we describe a MOF-based, fully autonomous system, which combines sensing, a specific response, and the release of an antimicrobial agent. The Cu-containing SURMOF, Cu-SURMOF 2, is stable in artificial seawater and shows stimulus-responsive anti-fouling properties against marine bacteria. When Cobetia marina adheres on the SURMOF, the framework's response is lethal to the adhering microorganism. A thorough analysis reveals that this response is induced by agents secreted from the microbes after adhesion to the substrate, and includes a release of Cu ions resulting from a degradation of the SURMOF. The stimulus-responsive antifouling effect of Cu-SURMOF 2 demonstrates the first application of Cu-SURMOF 2 as autonomous system with great potential for further microbiological and cell culture applications.

  1. Tunable electrical conductivity in metal-organic framework thin-film devices.

    PubMed

    Talin, A Alec; Centrone, Andrea; Ford, Alexandra C; Foster, Michael E; Stavila, Vitalie; Haney, Paul; Kinney, R Adam; Szalai, Veronika; El Gabaly, Farid; Yoon, Heayoung P; Léonard, François; Allendorf, Mark D

    2014-01-03

    We report a strategy for realizing tunable electrical conductivity in metal-organic frameworks (MOFs) in which the nanopores are infiltrated with redox-active, conjugated guest molecules. This approach is demonstrated using thin-film devices of the MOF Cu3(BTC)2 (also known as HKUST-1; BTC, benzene-1,3,5-tricarboxylic acid) infiltrated with the molecule 7,7,8,8-tetracyanoquinododimethane (TCNQ). Tunable, air-stable electrical conductivity over six orders of magnitude is achieved, with values as high as 7 siemens per meter. Spectroscopic data and first-principles modeling suggest that the conductivity arises from TCNQ guest molecules bridging the binuclear copper paddlewheels in the framework, leading to strong electronic coupling between the dimeric Cu subunits. These ohmically conducting porous MOFs could have applications in conformal electronic devices, reconfigurable electronics, and sensors.

  2. Molecular tectonics of mixed-ligand metal-organic frameworks: positional isomeric effect, metal-directed assembly, and structural diversification.

    PubMed

    Du, Miao; Jiang, Xiu-Juan; Zhao, Xiao-Jun

    2007-05-14

    A series of nine mixed-ligand metal-organic frameworks (MOFs) have been prepared by the combination of a bent dipyridyl linker 4-amino-3,5-bis(4-pyridyl)-1,2,4-triazole (bpt) and three benzenedicarboxylate isomers (pa = phthalate, ip = isophthalate, and tp = terephthalate), respectively, with different metal ions such as CoII, NiII, CuII, ZnII, and CdII. The framework structures of these neutral polymeric complexes have been determined by the X-ray single-crystal diffraction technique. Structural analysis reveals that the benzenedicarboxylate isomers display versatile coordination modes to manage the metal ions to form 1-D chain or ribbon arrays, which are further extended via the exo-bidentate bpt connectors to give rise to a variety of coordination networks, such as a simple (4,4) layer, 2-D double layer with decorated (4,4) topology, 2-D layer with decorated (3,6) topology, 2-D bilayer with 82.10 topology (2-fold interpenetration), 3-D polythreaded architecture (1-D + 2-D), and 2-fold interpenetrating porous lattice of (4,4) layers. The accessorial secondary interactions such as hydrogen bonding and/or aromatic stacking are also helpful for the extension and stabilization of the final supramolecular aggregates. This work evidently indicates that the isomeric effect of the anionic benzenedicarboxylate is significant in the construction of these network structures, which are also well regulated by the metal centers. The ZnII and CdII MOFs exhibit strong solid-state luminescence emissions at room temperature, which originate differently from intraligand transition or ligand-to-metal charge transfer. Thermal stability of these crystalline materials has been explored by thermogravimetric analysis of mass loss. The 3-D host frameworks of MOFs 8 and 9 show similar porous cavities, and their desorption/adsorption behaviors of guest solvents have also been investigated.

  3. Conformational diversity of flexible ligand in metal-organic frameworks controlled by size-matching mixed ligands

    SciTech Connect

    Hua, Xiu-Ni; Qin, Lan; Yan, Xiao-Zhi; Yu, Lei; Xie, Yi-Xin; Han, Lei

    2015-12-15

    Hydrothermal reactions of N-auxiliary flexible exo-bidentate ligand 1,3-bis(4-pyridyl)propane (bpp) and carboxylates ligands naphthalene-2,6-dicarboxylic acid (2,6-H{sub 2}ndc) or 4,4′-(hydroxymethylene)dibenzoic acid (H{sub 2}hmdb), in the presence of cadmium(II) salts have given rise to two novel metal-organic frameworks based on flexible ligands (FL-MOFs), namely, [Cd{sub 2}(2,6-ndc){sub 2}(bpp)(DMF)]·2DMF (1) and [Cd{sub 3}(hmdb){sub 3}(bpp)]·2DMF·2EtOH (2) (DMF=N,N-Dimethylformamide). Single-crystal X-ray diffraction analyses revealed that compound 1 exhibits a three-dimensional self-penetrating 6-connected framework based on dinuclear cluster second building unit. Compound 2 displays an infinite three-dimensional ‘Lucky Clover’ shape (2,10)-connected network based on the trinuclear cluster and V-shaped organic linkers. The flexible bpp ligand displays different conformations in 1 and 2, which are successfully controlled by size-matching mixed ligands during the self-assembly process. - Graphical abstract: Compound 1 exhibits a 3D self-penetrating 6-connected framework based on dinuclear cluster, and 2 displays an infinite 3D ‘Lucky Clover’ shape (2,10)-connected network based on the trinuclear cluster. The flexible 1,3-bis(4-pyridyl)propane ligand displays different conformations in 1 and 2, which successfully controlled by size-matching mixed ligands during the self-assembly process.

  4. Quasi-3D Multi-scale Modeling Framework Development

    NASA Astrophysics Data System (ADS)

    Arakawa, A.; Jung, J.

    2008-12-01

    When models are truncated in or near an energetically active range of the spectrum, model physics must be changed as the resolution changes. The model physics of GCMs and that of CRMs are, however, quite different from each other and at present there is no unified formulation of model physics that automatically provides transition between these model physics. The Quasi-3D (Q3D) Multi-scale Modeling Framework (MMF) is an attempt to bridge this gap. Like the recently proposed Heterogeneous Multiscale Method (HMM) (E and Engquist 2003), MMF combines a macroscopic model, GCM, and a microscopic model, CRM. Unlike the traditional multiscale methods such as the multi-grid and adapted mesh refinement techniques, HMM and MMF are for solving multi-physics problems. They share the common objective "to design combined macroscopic-microscopic computational methods that are much more efficient than solving the full microscopic model and at the same time give the information we need" (E et al. 2008). The question is then how to meet this objective in practice, which can be highly problem dependent. In HHM, the efficiency is gained typically by localization of the microscale problem. Following the pioneering work by Grabowski and Smolarkiewicz (1999) and Grabowski (2001), MMF takes advantage of the fact that 2D CRMs are reasonably successful in simulating deep clouds. In this approach, the efficiency is gained by sacrificing the three-dimensionality of cloud-scale motion. It also "localizes" the algorithm through embedding a CRM in each GCM grid box using cyclic boundary condition. The Q3D MMF is an attempt to reduce the expense due to these constraints by partially including the cloud-scale 3D effects and extending the CRM beyond individual GCM grid boxes. As currently formulated, the Q3D MMF is a 4D estimation/prediction framework that combines a GCM with a 3D anelastic cloud-resolving vector vorticity equation model (VVM) applied to a network of horizontal grids. The network

  5. Tailoring porosity and rotational dynamics in a series of octacarboxylate metal-organic frameworks.

    PubMed

    Moreau, Florian; Kolokolov, Daniil I; Stepanov, Alexander G; Easun, Timothy L; Dailly, Anne; Lewis, William; Blake, Alexander J; Nowell, Harriott; Lennox, Matthew J; Besley, Elena; Yang, Sihai; Schröder, Martin

    2017-03-21

    Modulation and precise control of porosity of metal-organic frameworks (MOFs) is of critical importance to their materials function. Here we report modulation of porosity for a series of isoreticular octacarboxylate MOFs, denoted MFM-180 to MFM-185, via a strategy of selective elongation of metal-organic cages. Owing to the high ligand connectivity, these MOFs do not show interpenetration, and are robust structures that have permanent porosity. Interestingly, activated MFM-185a shows a high Brunauer-Emmett-Teller (BET) surface area of 4,734 m(2) g(-1) for an octacarboxylate MOF. These MOFs show remarkable CH4 and CO2 adsorption properties, notably with simultaneously high gravimetric and volumetric deliverable CH4 capacities of 0.24 g g(-1) and 163 vol/vol (298 K, 5-65 bar) recorded for MFM-185a due to selective elongation of tubular cages. The dynamics of molecular rotors in deuterated MFM-180a-d16 and MFM-181a-d16 were investigated by variable-temperature (2)H solid-state NMR spectroscopy to reveal the reorientation mechanisms within these materials. Analysis of the flipping modes of the mobile phenyl groups, their rotational rates, and transition temperatures paves the way to controlling and understanding the role of molecular rotors through design of organic linkers within porous MOF materials.

  6. Homochiral metal-organic frameworks and their application in chromatography enantioseparations.

    PubMed

    Peluso, Paola; Mamane, Victor; Cossu, Sergio

    2014-10-10

    The last frontier in the chiral stationary phases (CSPs) field for chromatography enantioseparations is represented by homochiral metal-organic frameworks (MOFs), a class of organic-inorganic hybrid materials built from metal-connecting nodes and organic-bridging ligands. The modular nature of these materials allows to design focused structures by combining properly metal, organic ligands and rigid polytopic spacers. Intriguingly, chiral ligands introduce molecular chirality in the MOF-network as well as homochirality in the secondary structure of materials (such as homohelicity) producing homochiral nets in a manner mimicking biopolymers (proteins, polysaccharides) which are characterized by a definite helical sense associated with the chirality of their building blocks (amino acids or sugars). Nowadays, robust and flexible materials characterized by high porosity and surface area became available by using preparative procedures typical of the so-called reticular synthesis. This review focuses on recent developments in the synthesis and applications of homochiral MOFs as supports for chromatography enantioseparations. Indeed, despite this field is in its infancy, interesting results have been produced and a critical overview of the 12 reported applications for gas chromatography (GC) and high-performance liquid chromatography (HPLC) can orient the reader approaching the field. Mechanistic aspects are shortly discussed and a view regarding future trends in this field is provided.

  7. Tetrazine chromophore-based metal-organic frameworks with unusual configurations: synthetic, structural, theoretical, fluorescent, and nonlinear optical studies.

    PubMed

    Li, Jianghua; Jia, Ding; Meng, Suci; Zhang, Jinfang; Cifuentes, Marie P; Humphrey, Mark G; Zhang, Chi

    2015-05-18

    Three unusual three-dimensional (3D) tetrazine chromophore-based metal-organic frameworks (MOFs) {(Et4 N)[WS4 Cu3 (CN)2 (4,4'-pytz)0.5 ]}n (1), {[MoS4 Cu4 (CN)2 (4,4'-pytz)2 ]⋅CH2 Cl2 }n (2), and {[WS4 Cu3 (4,4'-pytz)3 ]⋅[N(CN)2 ]}n (3; 4,4'-pytz=3,6-bis(4-pyridyl)tetrazine) have been synthesized and characterized by using FTIR and UV/Vis spectroscopy, elemental analysis, powder X-ray diffraction, gel permeation chromatography, steady-state fluorescence, and thermogravimetric analysis; their identities were confirmed by single-crystal X-ray diffraction studies. MOF 1 possesses the first five-connected M/S/Cu (M=Mo, W) framework with an unusual 3D (4(4) ⋅6(6) ) topology constructed from T-shaped [WS4 Cu3 ](+) clusters as nodes and single CN(-) /4,4'-pytz bridges as linkers. MOF 2 features a novel 3D MOF structure with (4(20) ⋅6(8) ) topology, in which the bridging 4,4'-pytz ligands exhibit unique distorted arch structures. MOF 3 displays the first 3D MOF structure based on flywheel-shaped [WS4 Cu3 ](+) clusters with a non-interpenetrating honeycomb-like framework and a heavily distorted "ACS" topology. Steady-state fluorescence studies of 1-3 reveal significant fluorescence emissions. The nonlinear optical (NLO) properties of 1-3 were investigated by using a Z-scan technique with 5 ns pulses at λ=532 nm. The Z-scan experimental results show that the π-delocalizable tetrazine-based 4,4'-pytz ligands contribute to the strong third-order NLO properties exhibited by 1-3. Time-dependent density functional theory studies afforded insight into the electronic transitions and spectral characterization of these functionalized NLO molecular materials.

  8. Molecular tectonics of metal-organic frameworks (MOFs): a rational design strategy for unusual mixed-connected network topologies.

    PubMed

    Du, Miao; Zhang, Zhi-Hui; Tang, Liang-Fu; Wang, Xiu-Guang; Zhao, Xiao-Jun; Batten, Stuart R

    2007-01-01

    To systematically explore the higher-dimensional network structures with mixed connectivity, a series of two-dimensional (2D) and three-dimensional (3D) metal-organic frameworks (MOFs) with unusual (3,6)-connected net topologies are presented. These crystalline materials include [{[Mn(btza)2(H2O)2].2 H2O}n] (1), [{[Zn(btza)2(H2O)2].2 H2O}n] (2), [{[Cu(btza)2].H2O}n] (3), and [{[Cd(btza)2].3 H2O}n] (4), which have been successfully assembled through a predesigned three-connected organic component bis(1,2,4-triazol-1-yl)acetate (btza) with a variety of octahedral metal cores based on the modular synthetic methodology. The topological paradigms shown in this work cover the 2D CdCl2, 3D (4(2).6)2(4(4).6(2).8(7).10(2)), and pyrite (pyr) types. That is, when properly treated with the familiar first-row divalent metal ions, btza may perfectly furnish the coordination spheres for effective connectivity to result in diverse (3,6)-connected nets. Beyond this, a detailed analysis of network topology for all known 3D (3,6)-connected frameworks in both inorganic and inorganic-organic hybrid materials is described. Specific network connectivity of these MOFs indicates that the metal centers represent the most significant and alterable factor in structural assembly, although they show reliable and similar geometries. In this context, the combination of the distinct d10 AgI ion with btza in different solvents affords two isomorphous MOFs [{[Ag(btza)].glycol}n] (5) and [{[Ag(btza)]CH3OH}n] (6) with a binodal 4-connected 3D SrAl2 (sra) topology. The network structures of MOFs 1-3 and 5 turn out to be more complicated and interesting if one considers the hydrogen bonding between the host coordination frameworks and the intercalated solvent molecules. Furthermore, the role of the included solvents in the generation and stabilization of MOFs 1-6 is also investigated.

  9. Spectroscopic Evidence for Room Temperature Interaction of Molecular Oxygen with Cobalt Porphyrin Linker Sites within a Metal-Organic Framework.

    PubMed

    Lahanas, Nicole; Kucheryavy, Pavel; Lockard, Jenny V

    2016-10-17

    Metalloporphyrin-based metal-organic frameworks offer a promising platform for developing solid-state porous materials with accessible, coordinatively unsaturated metal sites. Probing small-molecule interactions at the metalloporphyrin sites within these materials on a molecular level under ambient conditions is crucial for both understanding and ultimately harnessing this functionality for potential catalytic purposes. Co-PCN-222, a metal-organic framework based on cobalt(II) porphyrin linkers. is investigated using in situ UV-vis diffuse-reflectance and X-ray absorption spectroscopy. Spectroscopic evidence for the axial interaction of diatomic oxygen with the framework's open metalloporphyrin sites at room temperature is presented and discussed.

  10. A novel type of matrix for surface-assisted laser desorption-ionization mass spectrometric detection of biomolecules using metal-organic frameworks.

    PubMed

    Fu, Chien-Ping; Lirio, Stephen; Liu, Wan-Ling; Lin, Chia-Her; Huang, Hsi-Ya

    2015-08-12

    A 3D metal-organic framework (MOF) nanomaterial as matrix for surface-assisted laser desorption/ionization mass spectrometry (SALDI-MS) and tandem mass spectrometry (MS/MS) was developed for the analysis of complex biomolecules. Unlike other nanoparticle matrices, this MOF nanomaterial does not need chemical modification prior to use. An exceptional signal reproducibility as well as very low background interferences in analyzing mono-/di-saccharides, peptides and complex starch digests demonstrate its high potential for biomolecule assays, especially for small molecules.

  11. 3-D HYDRODYNAMIC MODELING IN A GEOSPATIAL FRAMEWORK

    SciTech Connect

    Bollinger, J; Alfred Garrett, A; Larry Koffman, L; David Hayes, D

    2006-08-24

    3-D hydrodynamic models are used by the Savannah River National Laboratory (SRNL) to simulate the transport of thermal and radionuclide discharges in coastal estuary systems. Development of such models requires accurate bathymetry, coastline, and boundary condition data in conjunction with the ability to rapidly discretize model domains and interpolate the required geospatial data onto the domain. To facilitate rapid and accurate hydrodynamic model development, SRNL has developed a pre- and post-processor application in a geospatial framework to automate the creation of models using existing data. This automated capability allows development of very detailed models to maximize exploitation of available surface water radionuclide sample data and thermal imagery.

  12. Facile synthesis of multiple enzyme-containing metal-organic frameworks in a biomolecule-friendly environment.

    PubMed

    Wu, Xiaoling; Ge, Jun; Yang, Cheng; Hou, Miao; Liu, Zheng

    2015-09-07

    The one-step and facile synthesis of multi-enzyme-containing metal-organic framework (MOF) nanocrystals in aqueous solution at 25 °C was reported in this study. The GOx&HRP/ZIF-8 nanocomposite displayed high catalytic efficiency, high selectivity and enhanced stability due to the protecting effect of the framework.

  13. Fluorous Metal Organic Frameworks as Superhydrophobic Adsorbents for Oil Spill Cleanup and Hydrocarbons Storage

    SciTech Connect

    Yang, Chi; Mather, Qian; Wang, Xiaoping; Kaipa, Ushasree; Nesterov, Vladimir; Venero, Augustin; Omary, Mohammad A

    2011-01-01

    We demonstrate that fluorous metal-organic frameworks (FMOFs) are highly hydrophobic porous materials with a high capacity and affinity to C{sub 6}-C{sub 8} hydrocarbons of oil components. FMOF-1 exhibits reversible adsorption with a high capacity for n-hexane, cyclohexane, benzene, toluene, and p-xylene, with no detectable water adsorption even at near 100% relative humidity, drastically outperforming activated carbon and zeolite porous materials. FMOF-2, obtained from annealing FMOF-1, shows enlarged cages and channels with double toluene adsorption vs FMOF-1 based on crystal structures. The results suggest great promise for FMOFs in applications such as removal of organic pollutants from oil spills or ambient humid air, hydrocarbon storage and transportation, water purification, etc. under practical working conditions.

  14. Privileged phosphine-based metal-organic frameworks for broad-scope asymmetric catalysis.

    PubMed

    Falkowski, Joseph M; Sawano, Takahiro; Zhang, Teng; Tsun, Galen; Chen, Yuan; Lockard, Jenny V; Lin, Wenbin

    2014-04-09

    A robust and porous Zr metal-organic framework (MOF) based on a BINAP-derived dicarboxylate linker, BINAP-MOF, was synthesized and post-synthetically metalated with Ru and Rh complexes to afford highly enantioselective catalysts for important organic transformations. The Rh-functionalized MOF is not only highly enantioselective (up to >99% ee) but also 3 times as active as the homogeneous control. XAFS studies revealed that the Ru-functionalized MOF contains Ru-BINAP precatalysts with the same coordination environment as the homogeneous Ru complex. The post-synthetically metalated BINAP-MOFs provide a versatile family of single-site solid catalysts for catalyzing a broad scope of asymmetric organic transformations, including addition of aryl and alkyl groups to α,β-unsaturated ketones and hydrogenation of substituted alkene and carbonyl compounds.

  15. Chemoselective single-site Earth-abundant metal catalysts at metal-organic framework nodes

    NASA Astrophysics Data System (ADS)

    Manna, Kuntal; Ji, Pengfei; Lin, Zekai; Greene, Francis X.; Urban, Ania; Thacker, Nathan C.; Lin, Wenbin

    2016-08-01

    Earth-abundant metal catalysts are critically needed for sustainable chemical synthesis. Here we report a simple, cheap and effective strategy of producing novel earth-abundant metal catalysts at metal-organic framework (MOF) nodes for broad-scope organic transformations. The straightforward metalation of MOF secondary building units (SBUs) with cobalt and iron salts affords highly active and reusable single-site solid catalysts for a range of organic reactions, including chemoselective borylation, silylation and amination of benzylic C-H bonds, as well as hydrogenation and hydroboration of alkenes and ketones. Our structural, spectroscopic and kinetic studies suggest that chemoselective organic transformations occur on site-isolated, electron-deficient and coordinatively unsaturated metal centres at the SBUs via σ-bond metathesis pathways and as a result of the steric environment around the catalytic site. MOFs thus provide a novel platform for the development of highly active and affordable base metal catalysts for the sustainable synthesis of fine chemicals.

  16. Hydrogen storage in Pd nanocrystals covered with a metal-organic framework.

    PubMed

    Li, Guangqin; Kobayashi, Hirokazu; Taylor, Jared M; Ikeda, Ryuichi; Kubota, Yoshiki; Kato, Kenichi; Takata, Masaki; Yamamoto, Tomokazu; Toh, Shoichi; Matsumura, Syo; Kitagawa, Hiroshi

    2014-08-01

    Hydrogen is an essential component in many industrial processes. As a result of the recent increase in the development of shale gas, steam reforming of shale gas has received considerable attention as a major source of H2, and the more efficient use of hydrogen is strongly demanded. Palladium is well known as a hydrogen-storage metal and an effective catalyst for reactions related to hydrogen in a variety of industrial processes. Here, we present remarkably enhanced capacity and speed of hydrogen storage in Pd nanocrystals covered with the metal-organic framework (MOF) HKUST-1 (copper(II) 1,3,5-benzenetricarboxylate). The Pd nanocrystals covered with the MOF have twice the storage capacity of the bare Pd nanocrystals. The significantly enhanced hydrogen storage capacity was confirmed by hydrogen pressure-composition isotherms and solid-state deuterium nuclear magnetic resonance measurements. The speed of hydrogen absorption in the Pd nanocrystals is also enhanced by the MOF coating.

  17. Metal-organic framework based highly selective fluorescence turn-on probe for hydrogen sulphide

    NASA Astrophysics Data System (ADS)

    Nagarkar, Sanjog S.; Saha, Tanmoy; Desai, Aamod V.; Talukdar, Pinaki; Ghosh, Sujit K.

    2014-11-01

    Hydrogen sulphide (H2S) is known to play a vital role in human physiology and pathology which stimulated interest in understanding complex behaviour of H2S. Discerning the pathways of H2S production and its mode of action is still a challenge owing to its volatile and reactive nature. Herein we report azide functionalized metal-organic framework (MOF) as a selective turn-on fluorescent probe for H2S detection. The MOF shows highly selective and fast response towards H2S even in presence of other relevant biomolecules. Low cytotoxicity and H2S detection in live cells, demonstrate the potential of MOF towards monitoring H2S chemistry in biological system. To the best of our knowledge this is the first example of MOF that exhibit fast and highly selective fluorescence turn-on response towards H2S under physiological conditions.

  18. Adsorption of silver nanoparticles from aqueous solution on copper-based metal organic frameworks (HKUST-1).

    PubMed

    Conde-González, J E; Peña-Méndez, E M; Rybáková, S; Pasán, J; Ruiz-Pérez, C; Havel, J

    2016-05-01

    Silver nanoparticles (AgNP) are emerging pollutants. The use of novel materials such as Cu-(benzene 1,3,5-tricarboxylate, BTC) Metal-Organic Framework (MOFs), for AgNP adsorption and their removal from aqueous solutions has been studied. The effect of different parameters was followed and isotherm model was suggested. MOFs adsorbed fast and efficiently AgNP in the range C0 < 10 mg L(-1), being Freundlich isotherm (R = 0.993) these data fitted to. Among studied parameters a remarkable effect of chloride on sorption was found, thus their possible interactions were considered. The high adsorption efficiency of AgNP was achieved and it was found to be very fast. The feasibility of adsorption on Cu-(BTC) was proved in spiked waters. The results showed the potential interest of new material as adsorbent for removing AgNP from environment.

  19. In Silico Discovery of High Deliverable Capacity Metal-Organic Frameworks

    NASA Astrophysics Data System (ADS)

    Bao, Yi; Martin, Richard; Simon, Cory; Haranczyk, Maciej; Smit, Berend; Deem, Michael; Michael W. Deem Team; Maciej Haranczyk Team; Berend Smit Team

    2015-03-01

    Metal organic frameworks (MOFs) are actively being explored as potential adsorbed natural gas storage materials for small vehicles. Experimental exploration of potential materials is limited by the throughput of synthetic chemistry. We here describe a computational methodology to complement and guide these experimental efforts. The method uses known chemical transformations in silico to identify MOFs with high methane deliverable capacity. The procedure explicitly considers synthesizability with geometric requirements on organic linkers. We efficiently search the composition and conformation space of organic linkers for nine MOF networks, finding 48 materials with higher predicted deliverable capacity (at 65 bar storage, 5.8 bar depletion, and 298 K) than MOF-5 in four of the nine networks. The best material has a predicted deliverable capacity 8% higher than that of MOF-5. US Department of Energy.

  20. Positronium emission spectra from self-assembled metal-organic frameworks

    NASA Astrophysics Data System (ADS)

    Crivelli, P.; Cooke, D.; Barbiellini, B.; Brown, B. L.; Feldblyum, J. I.; Guo, P.; Gidley, D. W.; Gerchow, L.; Matzger, A. J.

    2014-06-01

    Results of positronium (Ps) emission into vacuum from self-assembled metal-organic frameworks (MOFs) are presented and discussed in detail. Four different MOF crystals are considered, namely, MOF-5, IRMOF-8, ZnO4(FMA)3, and IRMOF-20. The measurements reveal that a fraction of the Ps is emitted into vacuum with a distinctly smaller energy than what one would expect for Ps localized in the MOFs' cells. Only calculations considering the Ps delocalized in a Bloch state can reproduce the measured Ps emission energy providing a robust demonstration of wave function delocalization in quantum mechanics. We show how the Bloch state population can be controlled by tuning the initial positron beam energy. Therefore, Ps in MOFs can be used both to simulate the dynamics of delocalized excitations in materials and to probe the MOFs for their advanced characterization.

  1. A Molecular Artisans Guide to Supramolecular Coordination Complexes and Metal Organic Frameworks

    NASA Astrophysics Data System (ADS)

    Wu, Xialu; Young, David J.; Hor, T. S. Andy

    2015-10-01

    As molecular synthesis advances, we are beginning to learn control of not only the chemical reactivity (and function) of molecules, but also of their interactions with other molecules. It is this basic idea that has led to the current explosion of supramolecular science and engineering. Parallel to this development, chemists have been actively pursuing the design of very large molecules using basic molecular building blocks. Herein, we review the general development of supramolecular chemistry and particularly of two new branches: supramolecular coordination complexes (SCCs) and metal organic frameworks (MOFs). These two fields are discussed in detail with typical examples to illustrate what is now possible and what challenges lie ahead for tomorrow's molecular artisans.

  2. Textile/metal-organic-framework composites as self-detoxifying filters for chemical-warfare agents.

    PubMed

    López-Maya, Elena; Montoro, Carmen; Rodríguez-Albelo, L Marleny; Aznar Cervantes, Salvador D; Lozano-Pérez, A Abel; Cenís, José Luis; Barea, Elisa; Navarro, Jorge A R

    2015-06-01

    The current technology of air-filtration materials for protection against highly toxic chemicals, that is, chemical-warfare agents, is mainly based on the broad and effective adsorptive properties of hydrophobic activated carbons. However, adsorption does not prevent these materials from behaving as secondary emitters once they are contaminated. Thus, the development of efficient self-cleaning filters is of high interest. Herein, we report how we can take advantage of the improved phosphotriesterase catalytic activity of lithium alkoxide doped zirconium(IV) metal-organic framework (MOF) materials to develop advanced self-detoxifying adsorbents of chemical-warfare agents containing hydrolysable P-F, P-O, and C-Cl bonds. Moreover, we also show that it is possible to integrate these materials onto textiles, thereby combining air-permeation properties of the textiles with the self-detoxifying properties of the MOF material.

  3. Cu₃(hexaiminotriphenylene)₂: an electrically conductive 2D metal-organic framework for chemiresistive sensing.

    PubMed

    Campbell, Michael G; Sheberla, Dennis; Liu, Sophie F; Swager, Timothy M; Dincă, Mircea

    2015-03-27

    The utility of metal-organic frameworks (MOFs) as functional materials in electronic devices has been limited to date by a lack of MOFs that display high electrical conductivity. Here, we report the synthesis of a new electrically conductive 2D MOF, Cu3(HITP)2 (HITP=2,3,6,7,10,11-hexaiminotriphenylene), which displays a bulk conductivity of 0.2 S cm(-1) (pellet, two-point-probe). Devices synthesized by simple drop casting of Cu3(HITP)2 dispersions function as reversible chemiresistive sensors, capable of detecting sub-ppm levels of ammonia vapor. Comparison with the isostructural 2D MOF Ni3(HITP)2 shows that the copper sites are critical for ammonia sensing, indicating that rational design/synthesis can be used to tune the functional properties of conductive MOFs.

  4. Bimetallic Metal-Organic Frameworks for Controlled Catalytic Graphitization of Nanoporous Carbons

    PubMed Central

    Tang, Jing; Salunkhe, Rahul R.; Zhang, Huabin; Malgras, Victor; Ahamad, Tansir; Alshehri, Saad M.; Kobayashi, Naoya; Tominaka, Satoshi; Ide, Yusuke; Kim, Jung Ho; Yamauchi, Yusuke

    2016-01-01

    Single metal-organic frameworks (MOFs), constructed from the coordination between one-fold metal ions and organic linkers, show limited functionalities when used as precursors for nanoporous carbon materials. Herein, we propose to merge the advantages of zinc and cobalt metals ions into one single MOF crystal (i.e., bimetallic MOFs). The organic linkers that coordinate with cobalt ions tend to yield graphitic carbons after carbonization, unlike those bridging with zinc ions, due to the controlled catalytic graphitization by the cobalt nanoparticles. In this work, we demonstrate a feasible method to achieve nanoporous carbon materials with tailored properties, including specific surface area, pore size distribution, degree of graphitization, and content of heteroatoms. The bimetallic-MOF-derived nanoporous carbon are systematically characterized, highlighting the importance of precisely controlling the properties of the carbon materials. This can be done by finely tuning the components in the bimetallic MOF precursors, and thus designing optimal carbon materials for specific applications. PMID:27471193

  5. A novel hybrid metal-organic framework-polymeric monolith for solid-phase microextraction.

    PubMed

    Lin, Chen-Lan; Lirio, Stephen; Chen, Ya-Ting; Lin, Chia-Her; Huang, Hsi-Ya

    2014-03-17

    This study describes the fabrication of a novel hybrid metal-organic framework- organic polymer (MOF-polymer) for use as a stationary phase in fritless solid-phase microextraction (SPME) for validating analytical methods. The MOF-polymer was prepared by using ethylene dimethacrylate (EDMA), butyl methacrylate (BMA), and an imidazolium-based ionic liquid as porogenic solvent followed by microwave-assisted polymerization with the addition of 25 % MOF. This novel hybrid MOF-polymer was used to extract penicillin (penicillin G, penicillin V, oxacillin, cloxacillin, nafcillin, dicloxacillin) under different conditions. Quantitative analysis of the extracted penicillin samples using the MOF-organic polymer for SPME was conducted by using capillary electrochromatography (CEC) coupled with UV analysis. The penicillin recovery was 63-96.2 % with high reproducibility, sensitivity, and reusability. The extraction time with the proposed fabricated SPME was only 34 min.

  6. Metal organic framework-mediated synthesis of highly active and stable Fischer-Tropsch catalysts.

    PubMed

    Santos, Vera P; Wezendonk, Tim A; Jaén, Juan José Delgado; Dugulan, A Iulian; Nasalevich, Maxim A; Islam, Husn-Ubayda; Chojecki, Adam; Sartipi, Sina; Sun, Xiaohui; Hakeem, Abrar A; Koeken, Ard C J; Ruitenbeek, Matthijs; Davidian, Thomas; Meima, Garry R; Sankar, Gopinathan; Kapteijn, Freek; Makkee, Michiel; Gascon, Jorge

    2015-03-05

    Depletion of crude oil resources and environmental concerns have driven a worldwide research on alternative processes for the production of commodity chemicals. Fischer-Tropsch synthesis is a process for flexible production of key chemicals from synthesis gas originating from non-petroleum-based sources. Although the use of iron-based catalysts would be preferred over the widely used cobalt, manufacturing methods that prevent their fast deactivation because of sintering, carbon deposition and phase changes have proven challenging. Here we present a strategy to produce highly dispersed iron carbides embedded in a matrix of porous carbon. Very high iron loadings (>40 wt %) are achieved while maintaining an optimal dispersion of the active iron carbide phase when a metal organic framework is used as catalyst precursor. The unique iron spatial confinement and the absence of large iron particles in the obtained solids minimize catalyst deactivation, resulting in high active and stable operation.

  7. Switching Thin Films of Azobenzene-Containing Metal-Organic Frameworks with Visible Light.

    PubMed

    Müller, Kai; Knebel, Alexander; Zhao, Fangli; Bléger, David; Caro, Jürgen; Heinke, Lars

    2017-04-03

    Stimuli-responsive molecules change their properties when exposed to external signals, such as light, and enable the preparation of smart materials. UV light, which often destroys organic materials, is typically required for activating the desired response of photoswitchable compounds, significantly limiting the potential applications of light-operated smart materials. Herein, we present the first metal-organic framework (MOF), which enables reversible modulation of key properties upon irradiation with visible light only. The fluorinated azobenzene side groups in the MOF structure can be reversibly switched between the trans and cis state by green and violet light, avoiding UV light. It was demonstrated that the uptake of guest molecules by these MOF films can be switched in a fully remote-controlled way. The membrane separation of hydrogen/hydrocarbon mixtures was investigated. The light-induced changes of the MOF pore size result in the switching of the permeation and of the selection factor.

  8. Adsorption and diffusion of carbon dioxide on metal-organic framework (MOF-5)

    SciTech Connect

    Zhao, Z.X.; Li, Z.; Lin, Y.S.

    2009-11-15

    Adsorption equilibrium and diffusion of CO{sub 2} on microporous metal-organic frameworks (MOF-5, or IRMOF-1) crystals were experimentally studied by the gravimetric method in the pressure range up to 1 atm. The MOF-5 crystal cubes of about 40-60 {mu} m in sizes were synthesized by the solvothermal method. Freundlich adsorption isotherm equation can fit well CO{sub 2} adsorption isotherms on MOF-5, with isosteric heat of adsorption of about 34 kJ/mol. Diffusion coefficient of CO{sub 2} in the MOF-5 is in the range of 8.1-11.5 x 10{sup -9} cm{sup 2}/s in 295-331K with activation energy of 7.61 kJ/mol. MOF-5 offers attractive adsorption properties as an adsorbent for separation of CO{sub 2} from flue gas.

  9. Detection of Volatile Organic Compounds by Weight-Detectable Sensors coated with Metal-Organic Frameworks

    PubMed Central

    Yamagiwa, Hiroki; Sato, Seiko; Fukawa, Tadashi; Ikehara, Tsuyoshi; Maeda, Ryutaro; Mihara, Takashi; Kimura, Mutsumi

    2014-01-01

    Detection of volatile organic compounds (VOCs) using weight-detectable quartz microbalance and silicon-based microcantilever sensors coated with crystalline metal-organic framework (MOF) thin films is described in this paper. The thin films of two MOFs were grown from COOH-terminated self-assembled monolayers onto the gold electrodes of sensor platforms. The MOF layers worked as the effective concentrators of VOC gases, and the adsorption/desorption processes of the VOCs could be monitored by the frequency changes of weight-detectable sensors. Moreover, the MOF layers provided VOC sensing selectivity to the weight-detectable sensors through the size-selective adsorption of the VOCs within the regulated nanospace of the MOFs. PMID:25175808

  10. Stable metal-organic frameworks containing single-molecule traps for enzyme encapsulation

    NASA Astrophysics Data System (ADS)

    Feng, Dawei; Liu, Tian-Fu; Su, Jie; Bosch, Mathieu; Wei, Zhangwen; Wan, Wei; Yuan, Daqiang; Chen, Ying-Pin; Wang, Xuan; Wang, Kecheng; Lian, Xizhen; Gu, Zhi-Yuan; Park, Jihye; Zou, Xiaodong; Zhou, Hong-Cai

    2015-01-01

    Enzymatic catalytic processes possess great potential in chemical manufacturing, including pharmaceuticals, fuel production and food processing. However, the engineering of enzymes is severely hampered due to their low operational stability and difficulty of reuse. Here, we develop a series of stable metal-organic frameworks with rationally designed ultra-large mesoporous cages as single-molecule traps (SMTs) for enzyme encapsulation. With a high concentration of mesoporous cages as SMTs, PCN-333(Al) encapsulates three enzymes with record-high loadings and recyclability. Immobilized enzymes that most likely undergo single-enzyme encapsulation (SEE) show smaller Km than free enzymes while maintaining comparable catalytic efficiency. Under harsh conditions, the enzyme in SEE exhibits better performance than free enzyme, showing the effectiveness of SEE in preventing enzyme aggregation or denaturation. With extraordinarily large pore size and excellent chemical stability, PCN-333 may be of interest not only for enzyme encapsulation, but also for entrapment of other nanoscaled functional moieties.

  11. Preparation of Pickering emulsions stabilized by metal organic frameworks using oscillatory woven metal micro-screen.

    PubMed

    Sabouni, R; Gomaa, H G

    2015-06-14

    Uniform Pickering emulsions stabilized by metal organic frameworks (MOFs) MIL-101 and ZIF-8 nanoparticles (NPs) were successfully prepared using an oscillatory woven metal microscreen (WMMS) emulsification system in the presence and the absence of surfactants. The effects of operating and system parameters including the frequency and amplitude of oscillation, the type of nano-particle and/or surfactant on the droplet size and coefficient of variance of the prepared emulsions are investigated. The results showed that both the hydrodynamics of the system and the hydrophobic/hydrophilic nature of the NP influenced the interfacial properties of the oil-water interface during droplet formation and after detachment, which in turn affected the final droplet size and distribution. Comparison between the measured and predicted droplet size using a simple torque balance (TB) model is discussed.

  12. Adsorption of volatile organic compounds in porous metal-organic frameworks functionalized by polyoxometalates

    NASA Astrophysics Data System (ADS)

    Ma, Feng-Ji; Liu, Shu-Xia; Liang, Da-Dong; Ren, Guo-Jian; Wei, Feng; Chen, Ya-Guang; Su, Zhong-Min

    2011-11-01

    The functionalization of porous metal-organic frameworks (Cu 3( BTC) 2) was achieved by incorporating Keggin-type polyoxometalates (POMs), and further optimized via alkali metal ion-exchange. In addition to thermal gravimetric analysis, IR, single-crystal X-ray diffraction, and powder X-ray diffraction, the adsorption properties were characterized by N 2 and volatile organic compounds (VOCs) adsorption measurements, including short-chain alcohols ( C<4), cyclohexane, benzene, and toluene. The adsorption enthalpies estimated by the modified Clausius-Clapeyron equation provided insight into the impact of POMs and alkali metal cations on the adsorption of VOCs. The introduction of POMs not only improved the stability, but also brought the increase of adsorption capacity by strengthening the interaction with gas molecules. Furthermore, the exchanged alkali metal cations acted as active sites to interact with adsorbates and enhanced the adsorption of VOCs.

  13. Understanding H2- H2 interactions in Metal Organic Frameworks (MOFs) with unsaturated metal centers

    NASA Astrophysics Data System (ADS)

    Nijem, Nour; Veyan, Jean F.; Kong, Lingzhu; Zhao, Yonggang; Li, Jing; Langreth, David; Chabal, Yves J.

    2011-03-01

    Unsaturated Metal Organic Frameworks (MOFs) are particularly interesting due to their high H2 uptakes with relatively large isosteric heats of adsorption (Qst > 8 kJ / mol) . ThisworkexploresH 2 - H 2 interactionsbetweenadsorbedH 2 atthedifferentsitesinMOF - 74 (M 2 (dhtp) , dhtp = 2 , 5 - dihydroxyterephthalate) andcombinesIRspectroscopywithvdW - DFTcalculations . TheadsorptionsitesinMOF - 74 arefromhighesttolowestbindingenergiesthemetal , oxygen , benzeneandpore - centersites . ThefrequencyofadsorbedH 2 atthemetalsitesuffersanadditional ~ - 30 cm -1 redshift (forMgandZn) and ~ - 84 cm -1 (forCo) whentheneighboringoxygensiteisoccupied . ThedipolemomentofadsorbedH 2 isalsoaffected . TheseinteractionsextendtothebenzenesitesforMOF - 74 - Co . AdecreaseindipolemomentofH 2 adsorbedatthemetalsiteisobservedwiththepartialoccupationofthebenzenesites . However , thecompleteoccupationofthebenzenesitesinducesanadditional ~ - 10 cm -1 red shift. DOE Grant No. DE-FG02-08ER46491.

  14. Regulating the spatial distribution of metal nanoparticles within metal-organic frameworks to enhance catalytic efficiency

    PubMed Central

    Yang, Qiu; Liu, Wenxian; Wang, Bingqing; Zhang, Weina; Zeng, Xiaoqiao; Zhang, Cong; Qin, Yongji; Sun, Xiaoming; Wu, Tianpin; Liu, Junfeng; Huo, Fengwei; Lu, Jun

    2017-01-01

    Composites incorporating metal nanoparticles (MNPs) within metal-organic frameworks (MOFs) have broad applications in many fields. However, the controlled spatial distribution of the MNPs within MOFs remains a challenge for addressing key issues in catalysis, for example, the efficiency of catalysts due to the limitation of molecular diffusion within MOF channels. Here we report a facile strategy that enables MNPs to be encapsulated into MOFs with controllable spatial localization by using metal oxide both as support to load MNPs and as a sacrificial template to grow MOFs. This strategy is versatile to a variety of MNPs and MOF crystals. By localizing the encapsulated MNPs closer to the surface of MOFs, the resultant MNPs@MOF composites not only exhibit effective selectivity derived from MOF cavities, but also enhanced catalytic activity due to the spatial regulation of MNPs as close as possible to the MOF surface. PMID:28195131

  15. Metal-organic Frameworks as A Tunable Platform for Designing Functional Molecular Materials

    PubMed Central

    Wang, Cheng; Liu, Demin

    2013-01-01

    Metal-organic frameworks (MOFs), also known as coordination polymers, represent an interesting class of crystalline molecular materials that are synthesized by combining metal-connecting points and bridging ligands. The modular nature of and mild conditions for MOF synthesis have permitted the rational structural design of numerous MOFs and the incorporation of various functionalities via constituent building blocks. The resulting designer MOFs have shown promise for applications in a number of areas, including gas storage/separation, nonlinear optics/ferroelectricity, catalysis, energy conversion/storage, chemical sensing, biomedical imaging, and drug delivery. The structure-property relationships of MOFs can also be readily established by taking advantage of the knowledge of their detailed atomic structures, which enables fine-tuning of their functionalities for desired applications. Through the combination of molecular synthesis and crystal engineering MOFs thus present an unprecedented opportunity for the rational and precise design of functional materials. PMID:23944646

  16. Exploration of Gate-Opening and Breathing Phenomena in a Tailored Flexible Metal-Organic Framework.

    PubMed

    Hyun, Sung-min; Lee, Jae Hwa; Jung, Gwan Yeong; Kim, Yun Kyeong; Kim, Tae Kyung; Jeoung, Sungeun; Kwak, Sang Kyu; Moon, Dohyun; Moon, Hoi Ri

    2016-02-15

    Flexible metal-organic frameworks (MOFs) show the structural transition phenomena, gate opening and breathing, upon the input of external stimuli. These phenomena have significant implications in their adsorptive applications. In this work, we demonstrate the direct capture of these gate-opening and breathing phenomena, triggered by CO2 molecules, in a well-designed flexible MOF composed of rotational sites and molecular gates. Combining X-ray single crystallographic data of a flexible MOF during gate opening/closing and breathing with in situ X-ray powder diffraction results uncovered the origin of this flexibility. Furthermore, computational studies revealed the specific sites required to open these gates by interaction with CO2 molecules.

  17. Separation of C2 Hydrocarbons by Porous Materials: Metal Organic Frameworks as Platform

    SciTech Connect

    Banerjee, Debasis; Liu, Jun; Thallapally, Praveen K.

    2014-12-22

    The effective separation of small hydrocarbon molecules (C1 – C4) is an important process for petroleum industry, determining the end price of many essential commodities in our daily lives. Current technologies for separation of these molecules rely on energy intensive fractional distillation processes at cryogenic temperature, which is particularly difficult because of their similar volatility. In retrospect, adsorptive separation using solid state adsorbents might be a cost effective alternative. Several types of solid state adsorbents (e.g. zeolite molecular sieves) were tested for separation of small hydrocarbon molecules as a function of pressure, temperature or vacuum. Among different types of plausible adsorbents, metal organic frameworks (MOFs), a class of porous, crystalline, inorganic-organic hybrid materials, is particularly promising. In this brief comment article, we discuss the separation properties of different types of solid state adsorbents, with a particular emphasis on MOF based adsorbents for separation of C2 hydrocarbon molecules.

  18. Mechanized azobenzene-functionalized zirconium metal-organic framework for on-command cargo release

    PubMed Central

    Meng, Xiangshi; Gui, Bo; Yuan, Daqiang; Zeller, Matthias; Wang, Cheng

    2016-01-01

    Stimuli-responsive metal-organic frameworks (MOFs) have gained increasing attention recently for their potential applications in many areas. We report the design and synthesis of a water-stable zirconium MOF (Zr-MOF) that bears photoresponsive azobenzene groups. This particular MOF can be used as a reservoir for storage of cargo in water, and the cargo-loaded MOF can be further capped to construct a mechanized MOF through the binding of β-cyclodextrin with the azobenzene stalks on the MOF surface. The resulting mechanized MOF has shown on-command cargo release triggered by ultraviolet irradiation or addition of competitive agents without premature release. This study represents a simple approach to the construction of stimuli-responsive mechanized MOFs, and considering mechanized UiO-68-azo made from biocompatible components, this smart system may provide a unique MOF platform for on-command drug delivery in the future. PMID:27493996

  19. Metal-organic framework based highly selective fluorescence turn-on probe for hydrogen sulphide

    PubMed Central

    Nagarkar, Sanjog S.; Saha, Tanmoy; Desai, Aamod V.; Talukdar, Pinaki; Ghosh, Sujit K.

    2014-01-01

    Hydrogen sulphide (H2S) is known to play a vital role in human physiology and pathology which stimulated interest in understanding complex behaviour of H2S. Discerning the pathways of H2S production and its mode of action is still a challenge owing to its volatile and reactive nature. Herein we report azide functionalized metal-organic framework (MOF) as a selective turn-on fluorescent probe for H2S detection. The MOF shows highly selective and fast response towards H2S even in presence of other relevant biomolecules. Low cytotoxicity and H2S detection in live cells, demonstrate the potential of MOF towards monitoring H2S chemistry in biological system. To the best of our knowledge this is the first example of MOF that exhibit fast and highly selective fluorescence turn-on response towards H2S under physiological conditions. PMID:25394493

  20. Fabrication of the microchannel by metal-organic framework, copper benzenetricarboxylate.

    PubMed

    Lim, Mikyung; Seo, You-Kyong; Park, Hyoun Hyang; Kim, Jin-Ha; Chang, Jong-San; Hwang, Young Kyu; Lee, Seung S

    2013-04-01

    We successfully fabricated the metal-organic framework (MOF), copper benzenetricarboxylate on a microchannel system, which was able to solve the problems created by increased heat dissipation in small electronic equipment. The microchannel system was designed to make an entrance part that can control the reaction temperature, which was predicted through a heat transfer analysis and the finite element method with COMSOL Multiphysics. Synthetic conditions, synthesis time, temperature and microchannel size were systematically tuned for the selective fabrication of copper benzenetricarboxylate on a microchannel surface. Scanning electron microscope (SEM) images, selected area electron diffraction (SAED) pattern and Fourier transform infrared (FT-IR) data clearly demonstrated that copper benzenetricarboxylate was strongly adhered to the bottom surfaces of the microchannels. Moreover, the synthesis of MOF in the microchannel system provided a much faster growth rate and better crystallinity compared to a conventional synthesis method.

  1. Anodized Aluminum Oxide Templated Synthesis of Metal-Organic Frameworks Used as Membrane Reactors.

    PubMed

    Yu, Yifu; Wu, Xue-Jun; Zhao, Meiting; Ma, Qinglang; Chen, Junze; Chen, Bo; Sindoro, Melinda; Yang, Jian; Han, Shikui; Lu, Qipeng; Zhang, Hua

    2017-01-09

    The incorporation of metal-organic frameworks (MOFs) into membrane-shaped architectures is of great importance for practical applications. The currently synthesized MOF-based membranes show many disadvantages, such as poor compatibility, low dispersity, and instability, which severely limit their utility. Herein, we present a general, facile, and robust approach for the synthesis of MOF-based composite membranes through the in situ growth of MOF plates in the channels of anodized aluminum oxide (AAO) membranes. After being used as catalysis reactors, they exhibit high catalytic performance and stability in the Knoevenagel condensation reaction. The high catalytic performance might be attributed to the intrinsic structure of MOF-based composite membranes, which can remove the products from the reaction zone quickly, and prevent the aggregation and loss of catalysts during reaction and recycling process.

  2. Tunable catalytic activity of solid solution metal-organic frameworks in one-pot multicomponent reactions.

    PubMed

    Aguirre-Díaz, Lina María; Gándara, Felipe; Iglesias, Marta; Snejko, Natalia; Gutiérrez-Puebla, Enrique; Monge, M Ángeles

    2015-05-20

    The aim of this research is to establish how metal-organic frameworks (MOFs) composed of more than one metal in equivalent crystallographic sites (solid solution MOFs) exhibit catalytic activity, which is tunable by virtue of the metal ions ratio. New MOFs with general formula [InxGa1-x(O2C2H4)0.5(hfipbb)] were prepared by the combination of Ga and In. They are isostructural with their monometal counterparts, synthesized with Al, Ga, and In. Differences in their behavior as heterogeneous catalysts in the three-component, one pot Strecker reaction illustrate the potential of solid solution MOFs to provide the ability to address the various stages involved in the reaction mechanism.

  3. Metal-Organic Framework Thin Films as Stationary Phases in Microfabricated Gas-Chromatography Columns.

    SciTech Connect

    Read, Douglas; Sillerud, Colin Halliday

    2016-01-01

    The overarching goal of this project is to integrate Sandia's microfabricated gas-chromatography ( GC) columns with a stationary phase material that is capable of retaining high-volatility chemicals and permanent gases. The successful integration of such a material with GCs would dramatically expand the repertoire of detectable compounds for Sandia's various microanalysis systems. One such promising class of candidate materials is metal-organic frameworks (MOFs). In this report we detail our methods for controlled deposition of HKUST-1 MOF stationary phases within GC columns. We demonstrate: the chromatographic separation of natural gas; a method for determining MOF film thickness from chromatography alone; and the first-reported GC x GC separation of natural gas -- in general -- let alone for two disparate MOF stationary phases. In addition we determine the fundamental thermodynamic constant for mass sorption, the partition coefficient, for HKUST-1 and several light hydrocarbons and select toxic industrial chemicals.

  4. A scalable synthesis of a mesoporous metal-organic framework called NU-1000.

    SciTech Connect

    Wang, Timothy C.; Vermeulen, Nicolaas A.; Kim, In Soo; Martinson, Alex B. F.; Stoddart, J. Fraser; Hupp, Joseph T.; Farha, Omar K.

    2016-01-01

    The synthesis of NU-1000, a mesoporous metal-organic framework (MOF), can be conducted efficiently on a multigram scale from inexpensive starting materials. NU-1000 has been reported as an excellent candidate for gas separation and catalysis. In particular, it is ideal for the catalytic deactivation of nerve agents and shows great promise as a new generic platform for a wide range of applications. Multiple post-synthetic modification protocols have been developed using NU-1000 as the parent material, making it a potentially useful scaffold for several catalytic applications. The procedure for the preparation of NU-1000 can be scaled up reliably and is suitable for the production of 50 grams of the requisite organic linker and ?? grams of NU-1000. The entire synthesis is performed without purification by column chromatography and can be completed within 10 days.

  5. Cross coupling between electric and magnetic orders in a multiferroic metal-organic framework

    PubMed Central

    Tian, Ying; Stroppa, Alessandro; Chai, Yisheng; Yan, Liqin; Wang, Shouguo; Barone, Paolo; Picozzi, Silvia; Sun, Young

    2014-01-01

    The coexistence of both electric and magnetic orders in some metal-organic frameworks (MOFs) has yielded a new class of multiferroics beyond inorganic materials. However, the coupling between two orders in multiferroic MOFs has not been convincingly verified yet. Here we present clear experimental evidences of cross coupling between electric and magnetic orders in a multiferroic MOF [(CH3)2NH2]Fe(HCOO)3 with a perovskite structure. The dielelectric constant exhibit a hump just at the magnetic ordering temperature TN. Moreover, both the direct (magnetic field control of dielectric properties) and converse (electric field control of magnetization) magnetoelectric effects have been observed in the multiferroic state. This work opens up new insights on the origin of ferroelectricity in MOFs and highlights their promise as magnetoelectric multiferroics. PMID:25317819

  6. Characterization of Adsorption Enthalpy of Novel Water-Stable Zeolites and Metal-Organic Frameworks.

    PubMed

    Kim, Hyunho; Cho, H Jeremy; Narayanan, Shankar; Yang, Sungwoo; Furukawa, Hiroyasu; Schiffres, Scott; Li, Xiansen; Zhang, Yue-Biao; Jiang, Juncong; Yaghi, Omar M; Wang, Evelyn N

    2016-01-22

    Water adsorption is becoming increasingly important for many applications including thermal energy storage, desalination, and water harvesting. To develop such applications, it is essential to understand both adsorbent-adsorbate and adsorbate-adsorbate interactions, and also the energy required for adsorption/desorption processes of porous material-adsorbate systems, such as zeolites and metal-organic frameworks (MOFs). In this study, we present a technique to characterize the enthalpy of adsorption/desorption of zeolites and MOF-801 with water as an adsorbate by conducting desorption experiments with conventional differential scanning calorimetry (DSC) and thermogravimetric analyzer (TGA). With this method, the enthalpies of adsorption of previously uncharacterized adsorbents were estimated as a function of both uptake and temperature. Our characterizations indicate that the adsorption enthalpies of type I zeolites can increase to greater than twice the latent heat whereas adsorption enthalpies of MOF-801 are nearly constant for a wide range of vapor uptakes.

  7. Characterization of Adsorption Enthalpy of Novel Water-Stable Zeolites and Metal-Organic Frameworks

    NASA Astrophysics Data System (ADS)

    Kim, Hyunho; Cho, H. Jeremy; Narayanan, Shankar; Yang, Sungwoo; Furukawa, Hiroyasu; Schiffres, Scott; Li, Xiansen; Zhang, Yue-Biao; Jiang, Juncong; Yaghi, Omar M.; Wang, Evelyn N.

    2016-01-01

    Water adsorption is becoming increasingly important for many applications including thermal energy storage, desalination, and water harvesting. To develop such applications, it is essential to understand both adsorbent-adsorbate and adsorbate-adsorbate interactions, and also the energy required for adsorption/desorption processes of porous material-adsorbate systems, such as zeolites and metal-organic frameworks (MOFs). In this study, we present a technique to characterize the enthalpy of adsorption/desorption of zeolites and MOF-801 with water as an adsorbate by conducting desorption experiments with conventional differential scanning calorimetry (DSC) and thermogravimetric analyzer (TGA). With this method, the enthalpies of adsorption of previously uncharacterized adsorbents were estimated as a function of both uptake and temperature. Our characterizations indicate that the adsorption enthalpies of type I zeolites can increase to greater than twice the latent heat whereas adsorption enthalpies of MOF-801 are nearly constant for a wide range of vapor uptakes.

  8. Gas storage in porous metal-organic frameworks for clean energy applications.

    PubMed

    Ma, Shengqian; Zhou, Hong-Cai

    2010-01-07

    Depletion of fossil oil deposits and the escalating threat of global warming have put clean energy research, which includes the search for clean energy carriers such as hydrogen and methane as well as the reduction of carbon dioxide emissions, on the urgent agenda. A significant technical challenge has been recognized as the development of a viable method to efficiently trap hydrogen, methane and carbon dioxide gas molecules in a confined space for various applications. This issue can be addressed by employing highly porous materials as storage media, and porous metal-organic frameworks (MOFs) which have exceptionally high surface areas as well as chemically-tunable structures are playing an unusual role in this respect. In this feature article we provide an overview of the current status of clean energy applications of porous MOFs, including hydrogen storage, methane storage and carbon dioxide capture.

  9. Nano Metal-Organic Framework-Derived Inorganic Hybrid Nanomaterials: Synthetic Strategies and Applications.

    PubMed

    Mai, Hien Duy; Rafiq, Khezina; Yoo, Hyojong

    2016-11-11

    Nano- (or micro-scale) metal-organic frameworks (NMOFs), also known as coordination polymer particles (CPPs), have received much attention because of their structural diversities and tunable properties. Besides the direct use, NMOFs can be alternatively used as sacrificial templates/precursors for the preparation of a wide range of hybrid inorganic nanomaterials in straightforward and controllable manners. Distinct advantages of using NMOF templates are correlated to their structural and functional tailorability at molecular levels that is rarely acquired in any other conventional template/precursor. In addition, NMOF-derived inorganic nanomaterials with distinct chemical and physical properties are inferred to dramatically expand the scope of their utilization in many fields. In this review, we aim to provide readers with a comprehensive summary of recent progress in terms of synthetic approaches for the production of diverse inorganic hybrid nanostructures from as-synthesized NMOFs and their promising applications.

  10. Highly sensitive detection of dipicolinic acid with a water-dispersible terbium-metal organic framework.

    PubMed

    Bhardwaj, Neha; Bhardwaj, Sanjeev; Mehta, Jyotsana; Kim, Ki-Hyun; Deep, Akash

    2016-12-15

    The sensitive detection of dipicolinic acid (DPA) is strongly associated with the sensing of bacterial organisms in food and many types of environmental samples. To date, the demand for a sensitive detection method for bacterial toxicity has increased remarkably. Herein, we investigated the DPA detection potential of a water-dispersible terbium-metal organic framework (Tb-MOF) based on the fluorescence quenching mechanism. The Tb-MOF showed a highly sensitive ability to detect DPA at a limit of detection of 0.04nM (linear range of detection: 1nM to 5µM) and also offered enhanced selectivity from other commonly associated organic molecules. The present study provides a basis for the application of Tb-MOF for direct, convenient, highly sensitive, and specific detection of DPA in the actual samples.

  11. Regulating the spatial distribution of metal nanoparticles within metal-organic frameworks to enhance catalytic efficiency

    NASA Astrophysics Data System (ADS)

    Yang, Qiu; Liu, Wenxian; Wang, Bingqing; Zhang, Weina; Zeng, Xiaoqiao; Zhang, Cong; Qin, Yongji; Sun, Xiaoming; Wu, Tianpin; Liu, Junfeng; Huo, Fengwei; Lu, Jun

    2017-02-01

    Composites incorporating metal nanoparticles (MNPs) within metal-organic frameworks (MOFs) have broad applications in many fields. However, the controlled spatial distribution of the MNPs within MOFs remains a challenge for addressing key issues in catalysis, for example, the efficiency of catalysts due to the limitation of molecular diffusion within MOF channels. Here we report a facile strategy that enables MNPs to be encapsulated into MOFs with controllable spatial localization by using metal oxide both as support to load MNPs and as a sacrificial template to grow MOFs. This strategy is versatile to a variety of MNPs and MOF crystals. By localizing the encapsulated MNPs closer to the surface of MOFs, the resultant MNPs@MOF composites not only exhibit effective selectivity derived from MOF cavities, but also enhanced catalytic activity due to the spatial regulation of MNPs as close as possible to the MOF surface.

  12. Site-selective synthesis of Janus-type metal-organic framework composites.

    PubMed

    Yadnum, Sudarat; Roche, Jérome; Lebraud, Eric; Négrier, Philippe; Garrigue, Patrick; Bradshaw, Darren; Warakulwit, Chompunuch; Limtrakul, Jumras; Kuhn, Alexander

    2014-04-07

    Herein, bipolar electrochemistry is applied in a straightforward way to the site-selective in situ synthesis of metal-organic framework (MOF) structures, which have attracted tremendous interest in recent years because of their significant application potential, ranging from sensing to gas storage and catalysis. The novelty of the presented work is that the deposit can be intentionally confined to a defined area of a substrate without using masks or templates. The intrinsic site-selectivity of bipolar electrochemistry makes it a method of choice to generate, in a highly controlled way, hybrid particles that may have different functionalities combined on the same particle. The wireless nature of electrodeposition allows the potential for mass production of such Janus-type objects.

  13. Chemoselective single-site Earth-abundant metal catalysts at metal-organic framework nodes.

    PubMed

    Manna, Kuntal; Ji, Pengfei; Lin, Zekai; Greene, Francis X; Urban, Ania; Thacker, Nathan C; Lin, Wenbin

    2016-08-30

    Earth-abundant metal catalysts are critically needed for sustainable chemical synthesis. Here we report a simple, cheap and effective strategy of producing novel earth-abundant metal catalysts at metal-organic framework (MOF) nodes for broad-scope organic transformations. The straightforward metalation of MOF secondary building units (SBUs) with cobalt and iron salts affords highly active and reusable single-site solid catalysts for a range of organic reactions, including chemoselective borylation, silylation and amination of benzylic C-H bonds, as well as hydrogenation and hydroboration of alkenes and ketones. Our structural, spectroscopic and kinetic studies suggest that chemoselective organic transformations occur on site-isolated, electron-deficient and coordinatively unsaturated metal centres at the SBUs via σ-bond metathesis pathways and as a result of the steric environment around the catalytic site. MOFs thus provide a novel platform for the development of highly active and affordable base metal catalysts for the sustainable synthesis of fine chemicals.

  14. Metal-organic framework based highly selective fluorescence turn-on probe for hydrogen sulphide.

    PubMed

    Nagarkar, Sanjog S; Saha, Tanmoy; Desai, Aamod V; Talukdar, Pinaki; Ghosh, Sujit K

    2014-11-14

    Hydrogen sulphide (H2S) is known to play a vital role in human physiology and pathology which stimulated interest in understanding complex behaviour of H2S. Discerning the pathways of H2S production and its mode of action is still a challenge owing to its volatile and reactive nature. Herein we report azide functionalized metal-organic framework (MOF) as a selective turn-on fluorescent probe for H2S detection. The MOF shows highly selective and fast response towards H2S even in presence of other relevant biomolecules. Low cytotoxicity and H2S detection in live cells, demonstrate the potential of MOF towards monitoring H2S chemistry in biological system. To the best of our knowledge this is the first example of MOF that exhibit fast and highly selective fluorescence turn-on response towards H2S under physiological conditions.

  15. Nickel(II) oxide nanostructure derived from metal-organic frameworks and its adsorption capability

    NASA Astrophysics Data System (ADS)

    Ru, Shuai; Xu, Lina; Xiao, Hongping; Li, Xinhua

    2016-11-01

    Nanosized nickel(II) oxide (NiO) was obtained by oxidation of ([(Ni2(nic)4(H2O)] n , nic = nicotinic acid), a metal-organic framework (MOF), at 350 °C. Nanosized NiO assembled to form block NiO having a mesoporous structure similar to the porous structure of activated carbon block. This bulk NiO exhibits excellent adsorbing capability, with 100% higher adsorption capacities than the [(Ni2(nic)4(H2O)] n MOF towards toluene and water steam; therefore, it can find potential application in gas adsorption. Moreover, this bulk NiO can be synthesized using a facile, environment-friendly, and cost-effective method, and exhibits excellent hydrothermal stability, which is not commonly observed for MOFs.

  16. Mixed-Lanthanoid Metal-Organic Framework for Ratiometric Cryogenic Temperature Sensing.

    PubMed

    Liu, Xue; Akerboom, Sebastiaan; de Jong, Mathijs; Mutikainen, Ilpo; Tanase, Stefania; Meijerink, Andries; Bouwman, Elisabeth

    2015-12-07

    A ratiometric thermometer based on a mixed-metal Ln(III) metal-organic framework is reported that has good sensitivity in a wide temperature range from 4 to 290 K and a quantum yield of 22% at room temperature. The sensing mechanism in the europium-doped compound Tb0.95Eu0.05HL (H4L = 5-hydroxy-1,2,4-benzenetricarboxylic acid) is based not only on phonon-assisted energy transfer from Tb(III) to Eu(III) centers, but also on phonon-assisted energy migration between neighboring Tb(III) ions. It shows good performance in a wide temperature range, especially in the range 4-50 K, reaching a sensitivity up to 31% K(-1) at 4 K.

  17. Transferable Force Field for Metal-Organic Frameworks from First-Principles: BTW-FF.

    PubMed

    Bristow, Jessica K; Tiana, Davide; Walsh, Aron

    2014-10-14

    We present an ab-initio derived force field to describe the structural and mechanical properties of metal-organic frameworks (or coordination polymers). The aim is a transferable interatomic potential that can be applied to MOFs regardless of metal or ligand identity. The initial parametrization set includes MOF-5, IRMOF-10, IRMOF-14, UiO-66, UiO-67, and HKUST-1. The force field describes the periodic crystal and considers effective atomic charges based on topological analysis of the Bloch states of the extended materials. Transferable potentials were developed for the four organic ligands comprising the test set and for the associated Cu, Zn, and Zr metal nodes. The predicted materials properties, including bulk moduli and vibrational frequencies, are in agreement with explicit density functional theory calculations. The modal heat capacity and lattice thermal expansion are also predicted.

  18. Selectively catalytic micro- and nanocrystals of metal-organic framework [Co(4-bpdh)(HIA)]∝

    NASA Astrophysics Data System (ADS)

    Ye, Jing; Gou, Yongxia; Xu, Zhen-Liang; Xu, Haitao

    2015-03-01

    Metal-organic framework micro-crystals [Co(4-bpdh)(HIA)]∝ (1Co), crystallized in the monoclinic system (space group P12/n1, a=10.0009(16) Å, b=15.472(3) Å, c=18.563(3) Å, β=91.81(0)°, and Z=4), were controllably synthesized through the adjustment of the solvent system. The Co2+ ion center located in a six-coordinated environment combined with 5-hydroxyisophthalic acid (HIA) to produce ladder-like structures, which again linked with 2,5-bis(4-pyridyl)-3,4-diaza-2,4-hxadiene (4-bpdh) to yield a double-layer network. Micro-crystals 1Co exhibited selectively oxidation-catalytic properties for the degradation of methyl orange (conversion 90%) owing to ligand to metal charge transfer. Our work determined that the synthesized catalyst is not only highly selective for degradation of organic dyes, but also very efficient.

  19. Bimetallic Metal-Organic Frameworks for Controlled Catalytic Graphitization of Nanoporous Carbons

    NASA Astrophysics Data System (ADS)

    Tang, Jing; Salunkhe, Rahul R.; Zhang, Huabin; Malgras, Victor; Ahamad, Tansir; Alshehri, Saad M.; Kobayashi, Naoya; Tominaka, Satoshi; Ide, Yusuke; Kim, Jung Ho; Yamauchi, Yusuke

    2016-07-01

    Single metal-organic frameworks (MOFs), constructed from the coordination between one-fold metal ions and organic linkers, show limited functionalities when used as precursors for nanoporous carbon materials. Herein, we propose to merge the advantages of zinc and cobalt metals ions into one single MOF crystal (i.e., bimetallic MOFs). The organic linkers that coordinate with cobalt ions tend to yield graphitic carbons after carbonization, unlike those bridging with zinc ions, due to the controlled catalytic graphitization by the cobalt nanoparticles. In this work, we demonstrate a feasible method to achieve nanoporous carbon materials with tailored properties, including specific surface area, pore size distribution, degree of graphitization, and content of heteroatoms. The bimetallic-MOF-derived nanoporous carbon are systematically characterized, highlighting the importance of precisely controlling the properties of the carbon materials. This can be done by finely tuning the components in the bimetallic MOF precursors, and thus designing optimal carbon materials for specific applications.

  20. One-dimensional magnetic order in the metal-organic framework Tb(HCOO ) 3

    NASA Astrophysics Data System (ADS)

    Harcombe, Daniel R.; Welch, Philip G.; Manuel, Pascal; Saines, Paul J.; Goodwin, Andrew L.

    2016-11-01

    Variable-temperature neutron scattering measurements, reverse Monte Carlo analysis, and direct Monte Carlo simulation are used to characterize magnetic order in the metal-organic framework (MOF) Tb (HCOO) 3 over the temperature range 100 to 1.6 K =TN . The magnetic transition at TN is shown to involve one-dimensional ferromagnetic ordering to a partially ordered state related to the triangular Ising antiferromagnet and distinct from the canonical partially disordered antiferromagnet model. In this phase, the direction of magnetization of ferromagnetic chains tends to alternate between neighboring chains but this alternation is frustrated and is not itself ordered. We suggest the existence of low-dimensional magnetic order in Tb (HCOO) 3 is stabilized by the contrasting strength of inter- and intrachain magnetic coupling, itself a consequence of the underlying MOF architecture. Our results demonstrate how MOFs may provide an attractive if as yet underexplored platform for the realization and investigation of low-dimensional physics.

  1. Metal-organic framework nanoparticles decorated with graphene: A high-performance electromagnetic wave absorber

    NASA Astrophysics Data System (ADS)

    Wang, Yan; Zhang, Wenzhi; Wu, Xinming; Luo, Chunyan; Liang, Tan; Yan, Gang

    2016-10-01

    A novel metal organic framework (MOF) coated RGO was fabricated by a one-step method. The morphology and microstructure of MOF-53(Fe)/RGO composite were characterized by XRD and TEM. The electromagnetic parameters indicate that MOF-53(Fe)/RGO composite shows enhanced electromagnetic absorption properties compared with MOF-53(Fe). The maximum RL can reach -25.8 dB at 15.4 GHz and the absorption bandwidth with the reflection loss exceeding -10 dB is 5.9 GHz (from 12.1 to 18 GHz) with the thickness of 2 mm. The possible absorption mechanism was also investigated in detail. Our results indicate the potential application of MOF/RGO composite as a more efficient microwave absorber.

  2. Dubinin-Astakhov model for acetylene adsorption on metal-organic frameworks

    NASA Astrophysics Data System (ADS)

    Cheng, Peifu; Hu, Yun Hang

    2016-07-01

    Acetylene (C2H2) is explosive at a pressure above 29 psi, causing a safety issue for its storage and applications. C2H2 adsorption on metal-organic frameworks (MOFs) has been explored to solve the issue. However, a suitable isotherm equation for C2H2 adsorption on various MOFs has not been found. In this paper, it was demonstrated that Dubinin-Astakhov equation can be exploited as a general isotherm model to depict C2H2 adsorption on MOF-5, ZIF-8, HKUST-1, and MIL-53. In contrast, commonly used Langmuir and BET models exhibited their inapplicability for C2H2 adsorption on those MOFs.

  3. Materials design by evolutionary optimization of functional groups in metal-organic frameworks

    PubMed Central

    Collins, Sean P.; Daff, Thomas D.; Piotrkowski, Sarah S.; Woo, Tom K.

    2016-01-01

    A genetic algorithm that efficiently optimizes a desired physical or functional property in metal-organic frameworks (MOFs) by evolving the functional groups within the pores has been developed. The approach has been used to optimize the CO2 uptake capacity of 141 experimentally characterized MOFs under conditions relevant for postcombustion CO2 capture. A total search space of 1.65 trillion structures was screened, and 1035 derivatives of 23 different parent MOFs were identified as having exceptional CO2 uptakes of >3.0 mmol/g (at 0.15 atm and 298 K). Many well-known MOF platforms were optimized, with some, such as MIL-47, having their CO2 adsorption increase by more than 400%. The structures of the high-performing MOFs are provided as potential targets for synthesis. PMID:28138523

  4. Tailoring metal-organic frameworks for CO2 capture: the amino effect.

    PubMed

    Vitillo, Jenny G; Savonnet, Marie; Ricchiardi, Gabriele; Bordiga, Silvia

    2011-09-19

    Carbon dioxide capture from processes is one of the strategies adopted to decrease anthropogenic greenhouse gas emissions. To lower the cost associated with the regeneration of amine-based scrubber systems, one of the envisaged strategies is the grafting of amines onto high-surface-area supports and, in particular, onto metal-organic frameworks (MOFs). In this study, the interaction between CO(2) and aliphatic and aromatic amines has been characterized by quantum mechanical methods (MP2), focusing attention both on species already reported in MOFs and on new amine-based linkers, to inspire the rational synthesis of new high-capacity MOFs. The calculations highlight binding-site requisites and indicate that CO(2) vibrations are independent of the adsorption energy and monitoring them in probe-molecule experiments is not a suitable marker of efficient adsorption.

  5. Stable metal-organic frameworks containing single-molecule traps for enzyme encapsulation.

    PubMed

    Feng, Dawei; Liu, Tian-Fu; Su, Jie; Bosch, Mathieu; Wei, Zhangwen; Wan, Wei; Yuan, Daqiang; Chen, Ying-Pin; Wang, Xuan; Wang, Kecheng; Lian, Xizhen; Gu, Zhi-Yuan; Park, Jihye; Zou, Xiaodong; Zhou, Hong-Cai

    2015-01-19

    Enzymatic catalytic processes possess great potential in chemical manufacturing, including pharmaceuticals, fuel production and food processing. However, the engineering of enzymes is severely hampered due to their low operational stability and difficulty of reuse. Here, we develop a series of stable metal-organic frameworks with rationally designed ultra-large mesoporous cages as single-molecule traps (SMTs) for enzyme encapsulation. With a high concentration of mesoporous cages as SMTs, PCN-333(Al) encapsulates three enzymes with record-high loadings and recyclability. Immobilized enzymes that most likely undergo single-enzyme encapsulation (SEE) show smaller Km than free enzymes while maintaining comparable catalytic efficiency. Under harsh conditions, the enzyme in SEE exhibits better performance than free enzyme, showing the effectiveness of SEE in preventing enzyme aggregation or denaturation. With extraordinarily large pore size and excellent chemical stability, PCN-333 may be of interest not only for enzyme encapsulation, but also for entrapment of other nanoscaled functional moieties.

  6. Interactive Thermal Effects on Metal-Organic Framework Polymer Composite Membranes.

    PubMed

    Cacho-Bailo, Fernando; Téllez, Carlos; Coronas, Joaquín

    2016-07-04

    Polymeric membranes are important tools for intensifying separation processes in chemical industries, concerning strategic tasks such as CO2 sequestration, H2 production, and water supply and disposal. Mixed-matrix and supported membranes have been widely developed; recently many of them have been based on metal-organic frameworks (MOFs). However, most of the impacts MOFs have within the polymer matrix have yet to be determined. The effects related to thermal behavior arising from the combination of MOF ZIF-8 and polysulfone have now been quantified. The catalyzed oxidation of the polymer is strongly affected by the MOF crystal size and distribution inside the membrane. A 16 wt % 140 nm-sized ZIF-8 loading causes a 40 % decrease in the observed activation energy of the polysulfone oxidation that takes place at a temperature (545 °C) 80 °C lower than in the raw polymer (625 °C).

  7. Nanoporous designer solids with huge lattice constant gradients: multiheteroepitaxy of metal-organic frameworks.

    PubMed

    Wang, Zhengbang; Liu, Jinxuan; Lukose, Binit; Gu, Zhigang; Weidler, Peter G; Gliemann, Hartmut; Heine, Thomas; Wöll, Christof

    2014-03-12

    We demonstrate the realization of hierarchically organized MOF (metal-organic framework) multilayer systems with pronounced differences in the size of the nanoscale pores. Unusually large values for the lattice constant mismatch at the MOF-MOF heterojunctions are made possible by a particular liquid-phase epitaxy process. The multiheteroepitaxy is demonstrated for the isoreticular SURMOF-2 series [ Liu et al. Sci. Rep. 2012 , 2 , 921 ] by fabricating trilayer systems with lattice constants of 1.12, 1.34, and 1.55 nm. Despite these large (20%) lattice mismatches, highly crystalline, oriented multilayers were obtained. A thorough theoretical analysis of the MOF-on-MOF heterojunction structure and energetics allows us to identify the two main reasons for this unexpected tolerance of large lattice mismatch: the healing of vacancies with acetate groups and the low elastic constant of MOF materials.

  8. Synthesis and structure of new carbohydrate metal-organic frameworks and inclusion complexes

    NASA Astrophysics Data System (ADS)

    Sha, Jing-Quan; Wu, Lian-He; Li, Shu-Xian; Yang, Xiao-Ning; Zhang, Yu; Zhang, Qian-Nan; Zhu, Pei-Pei

    2015-12-01

    Two new metal-organic framework compounds based on natural β-cyclodextrin molecules (β-CD) and alkali metals (Na+/K+) were synthesized and characterized by elemental analyses, IR, XPRD and 1HNMR. Single-crystal X-ray diffraction analysis reveals that compounds 1 and 2 possess the bowl-like pore and the "8" type double channels configuration. Due to the [blow + channel] double configuration, 5-Fluorouracil (5-FU) and Quercetin inclusion complexes of compound 1 are studied, and the results show that the two kinds of drug with different structure and size can be included into the compound at the same time, which is expected to become a new type of multi-functional green crystalline solid material.

  9. Computational Design of Metal-Organic Frameworks with High Methane Deliverable Capacity

    NASA Astrophysics Data System (ADS)

    Bao, Yi; Martin, Richard; Simon, Cory; Haranczyk, Maciej; Smit, Berend; Deem, Michael; Deem Team; Haranczyk Team; Smit Team

    Metal-organic frameworks (MOFs) are a rapidly emerging class of nanoporous materials with largely tunable chemistry and diverse applications in gas storage, gas purification, catalysis, etc. Intensive efforts are being made to develop new MOFs with desirable properties both experimentally and computationally in the past decades. To guide experimental synthesis with limited throughput, we develop a computational methodology to explore MOFs with high methane deliverable capacity. This de novo design procedure applies known chemical reactions, considers synthesizability and geometric requirements of organic linkers, and evolves a population of MOFs with desirable property efficiently. We identify about 500 MOFs with higher deliverable capacity than MOF-5 in 10 networks. We also investigate the relationship between deliverable capacity and internal surface area of MOFs. This methodology can be extended to MOFs with multiple types of linkers and multiple SBUs. DE-FG02- 12ER16362.

  10. Heterometallic Metal-Organic Frameworks That Catalyze Two Different Reactions Sequentially.

    PubMed

    Saha, Debraj; Hazra, Dipak K; Maity, Tanmoy; Koner, Subratanath

    2016-06-20

    A series of copper- and alkaline-earth-metal-based multidimensional metal-organic frameworks, {[CuMg(pdc)2(H2O)4]·2H2O}n (1), [CuCa(pdc)2]n (2), [CuSr(pdc)2(H2O)3]n (3), and {[CuBa(pdc)2(H2O)5]·H2O}n (4), where H2Pdc = pyridine-2,5-dicarboxylic acid, were hydrothermally synthesized and characterized. Two different metals act as the active center to catalyze two kinds of reactions, viz., olefin to its epoxide followed by epoxide ring opening to afford the corresponding vicinal diol in a sequential manner.

  11. Electronic and magnetic properties of a conductive metal-organic framework from first principles

    NASA Astrophysics Data System (ADS)

    Hamed, Samia M.; Reyes-Lillo, Sebastian E.; Neaton, Jeffrey B.

    Motivated by the recent synthesis of a mixed-valence metal-organic framework (MOF) displaying high electron mobilities upon reduction, we undertake a computational study of its electronic, structural, and magnetic properties, utilizing ab initio density functional theory. We model the reduced system through charge doping, and the local ligand environment through finite cluster calculations. Molecular orbitals near the Fermi level are found to display mixtures of localized iron d and delocalized ligand p states suggesting strong charge carrier delocalization. Furthermore, we extend our study to one dimensional and three dimensional periodic systems and discuss possible transport mechanisms. Finally, the static correlation effects due to the presence of partially filled iron d orbitals requires an especially careful choice of exchange correlation functional, and the consequence of this choice is demonstrated.

  12. Surface chemistry of metal-organic frameworks at the liquid-solid interface.

    PubMed

    Zacher, Denise; Schmid, Rochus; Wöll, Christof; Fischer, Roland A

    2011-01-03

    Metal-organic frameworks (MOFs) are a fascinating class of novel inorganic-organic hybrid materials. They are essentially based on classic coordination chemistry and hold much promise for unique applications ranging from gas storage and separation to chemical sensing, catalysis, and drug release. The evolution of the full innovative potential of MOFs, in particular for nanotechnology and device integration, however requires a fundamental understanding of the formation process of MOFs. Also necessary is the ability to control the growth of thin MOF films and the positioning of size- and shape-selected crystals as well as MOF heterostructures on a given surface in a well-defined and oriented fashion. MOFs are solid-state materials typically formed by solvothermal reactions and their crystallization from the liquid phase involves the surface chemistry of their building blocks. This Review brings together various key aspects of the surface chemistry of MOFs.

  13. Separation membranes. Interfacial microfluidic processing of metal-organic framework hollow fiber membranes.

    PubMed

    Brown, Andrew J; Brunelli, Nicholas A; Eum, Kiwon; Rashidi, Fereshteh; Johnson, J R; Koros, William J; Jones, Christopher W; Nair, Sankar

    2014-07-04

    Molecular sieving metal-organic framework (MOF) membranes have great potential for energy-efficient chemical separations, but a major hurdle is the lack of a scalable and inexpensive membrane fabrication mechanism. We describe a route for processing MOF membranes in polymeric hollow fibers, combining a two-solvent interfacial approach for positional control over membrane formation (at inner and outer surfaces, or in the bulk, of the fibers), a microfluidic approach to replenishment or recycling of reactants, and an in situ module for membrane fabrication and permeation. We fabricated continuous molecular sieving ZIF-8 membranes in single and multiple poly(amide-imide) hollow fibers, with H2/C3H8 and C3H6/C3H8 separation factors as high as 370 and 12, respectively. We also demonstrate positional control of the ZIF-8 films and characterize the contributions of membrane defects and lumen bypass.

  14. Modulation by Amino Acids: Toward Superior Control in the Synthesis of Zirconium Metal-Organic Frameworks.

    PubMed

    Gutov, Oleksii V; Molina, Sonia; Escudero-Adán, Eduardo C; Shafir, Alexandr

    2016-09-12

    The synthesis of zirconium metal-organic frameworks (Zr MOFs) modulated by various amino acids, including l-proline, glycine, and l-phenylalanine, is shown to be a straightforward approach toward functional-group incorporation and particle-size control. High yields in Zr-MOF synthesis are achieved by employing 5 equivalents of the modulator at 120 °C. At lower temperatures, the method provides a series of Zr MOFs with increased particle size, including many suitable for single-crystal X-ray diffraction studies. Furthermore, amino acid modulators can be incorporated at defect sites in Zr MOFs with an amino acid/ligand ratio of up to 1:1, depending on the ligand structure and reaction conditions. The MOFs obtained through amino acid modulation exhibit an improved CO2 -capture capacity relative to nonfunctionalized materials.

  15. The role of metal-organic frameworks in a carbon-neutral energy cycle

    NASA Astrophysics Data System (ADS)

    Schoedel, Alexander; Ji, Zhe; Yaghi, Omar M.

    2016-04-01

    Reducing society's reliance on fossil fuels presents one of the most pressing energy and environmental challenges facing our planet. Hydrogen, methane and carbon dioxide, which are some of the smallest and simplest molecules known, may lie at the centre of solving this problem through realization of a carbon-neutral energy cycle. Potentially, this could be achieved through the deployment of hydrogen as the fuel of the long term, methane as a transitional fuel, and carbon dioxide capture and sequestration as the urgent response to ongoing climate change. Here we detail strategies and technologies developed to overcome the difficulties encountered in the capture, storage, delivery and conversion of these gas molecules. In particular, we focus on metal-organic frameworks in which metal oxide ‘hubs’ are linked with organic ‘struts’ to make materials of ultrahigh porosity, which provide a basis for addressing this challenge through materials design on the molecular level.

  16. Centimetre-scale micropore alignment in oriented polycrystalline metal-organic framework films via heteroepitaxial growth

    NASA Astrophysics Data System (ADS)

    Falcaro, Paolo; Okada, Kenji; Hara, Takaaki; Ikigaki, Ken; Tokudome, Yasuaki; Thornton, Aaron W.; Hill, Anita J.; Williams, Timothy; Doonan, Christian; Takahashi, Masahide

    2016-12-01

    The fabrication of oriented, crystalline films of metal-organic frameworks (MOFs) is a critical step toward their application to advanced technologies such as optics, microelectronics, microfluidics and sensing. However, the direct synthesis of MOF films with controlled crystalline orientation remains a significant challenge. Here we report a one-step approach, carried out under mild conditions, that exploits heteroepitaxial growth for the rapid fabrication of oriented polycrystalline MOF films on the centimetre scale. Our methodology employs crystalline copper hydroxide as a substrate and yields MOF films with oriented pore channels on scales that primarily depend on the dimensions of the substrate. To demonstrate that an anisotropic crystalline morphology can translate to a functional property, we assembled a centimetre-scale MOF film in the presence of a dye and showed that the optical response could be switched `ON’ or `OFF’ by simply rotating the film.

  17. Metal-organic frameworks with high capacity and selectivity for harmful gases

    PubMed Central

    Britt, David; Tranchemontagne, David; Yaghi, Omar M.

    2008-01-01

    Benchmarks have been established for the performance of six metal-organic frameworks (MOFs) and isoreticular MOFs (IRMOFs, which have the same underlying topology as MOF-5), MOF-5, IRMOF-3, MOF-74, MOF-177, MOF-199, and IRMOF-62, as selective adsorbents for eight harmful gases: sulfur dioxide, ammonia, chlorine, tetrahydrothiophene, benzene, dichloromethane, ethylene oxide, and carbon monoxide. Kinetic breakthrough measurements are used to determine the calculated dynamic adsorption capacity of each “benchmark” MOF for each gas. The capacity of each MOF is compared to that of a sample of Calgon BPL activated carbon. We find that pore functionality plays a dominant role in determining the dynamic adsorption performance of MOFs. MOFs featuring reactive functionality outperform BPL carbon in all but one case and exhibit high dynamic adsorption capacities up to 35% by weight. PMID:18711128

  18. Characterization of Adsorption Enthalpy of Novel Water-Stable Zeolites and Metal-Organic Frameworks

    PubMed Central

    Kim, Hyunho; Cho, H. Jeremy; Narayanan, Shankar; Yang, Sungwoo; Furukawa, Hiroyasu; Schiffres, Scott; Li, Xiansen; Zhang, Yue-Biao; Jiang, Juncong; Yaghi, Omar M.; Wang, Evelyn N.

    2016-01-01

    Water adsorption is becoming increasingly important for many applications including thermal energy storage, desalination, and water harvesting. To develop such applications, it is essential to understand both adsorbent-adsorbate and adsorbate-adsorbate interactions, and also the energy required for adsorption/desorption processes of porous material-adsorbate systems, such as zeolites and metal-organic frameworks (MOFs). In this study, we present a technique to characterize the enthalpy of adsorption/desorption of zeolites and MOF-801 with water as an adsorbate by conducting desorption experiments with conventional differential scanning calorimetry (DSC) and thermogravimetric analyzer (TGA). With this method, the enthalpies of adsorption of previously uncharacterized adsorbents were estimated as a function of both uptake and temperature. Our characterizations indicate that the adsorption enthalpies of type I zeolites can increase to greater than twice the latent heat whereas adsorption enthalpies of MOF-801 are nearly constant for a wide range of vapor uptakes. PMID:26796523

  19. Metal organic framework-mediated synthesis of highly active and stable Fischer-Tropsch catalysts

    NASA Astrophysics Data System (ADS)

    Santos, Vera P.; Wezendonk, Tim A.; Jaén, Juan José Delgado; Dugulan, A. Iulian; Nasalevich, Maxim A.; Islam, Husn-Ubayda; Chojecki, Adam; Sartipi, Sina; Sun, Xiaohui; Hakeem, Abrar A.; Koeken, Ard C. J.; Ruitenbeek, Matthijs; Davidian, Thomas; Meima, Garry R.; Sankar, Gopinathan; Kapteijn, Freek; Makkee, Michiel; Gascon, Jorge

    2015-03-01

    Depletion of crude oil resources and environmental concerns have driven a worldwide research on alternative processes for the production of commodity chemicals. Fischer-Tropsch synthesis is a process for flexible production of key chemicals from synthesis gas originating from non-petroleum-based sources. Although the use of iron-based catalysts would be preferred over the widely used cobalt, manufacturing methods that prevent their fast deactivation because of sintering, carbon deposition and phase changes have proven challenging. Here we present a strategy to produce highly dispersed iron carbides embedded in a matrix of porous carbon. Very high iron loadings (>40 wt %) are achieved while maintaining an optimal dispersion of the active iron carbide phase when a metal organic framework is used as catalyst precursor. The unique iron spatial confinement and the absence of large iron particles in the obtained solids minimize catalyst deactivation, resulting in high active and stable operation.

  20. System and method for generating and/or screening potential metal-organic frameworks

    DOEpatents

    Wilmer, Christopher E; Leaf, Michael; Snurr, Randall Q; Farha, Omar K; Hupp, Joseph T

    2014-12-02

    A system and method for systematically generating potential metal-organic framework (MOFs) structures given an input library of building blocks is provided herein. One or more material properties of the potential MOFs are evaluated using computational simulations. A range of material properties (surface area, pore volume, pore size distribution, powder x-ray diffraction pattern, methane adsorption capability, and the like) can be estimated, and in doing so, illuminate unidentified structure-property relationships that may only have been recognized by taking a global view of MOF structures. In addition to identifying structure-property relationships, this systematic approach to identify the MOFs of interest is used to identify one or more MOFs that may be useful for high pressure methane storage.

  1. System and method for generating and/or screening potential metal-organic frameworks

    DOEpatents

    Wilmer, Christopher E; Leaf, Michael; Snurr, Randall Q; Farha, Omar K; Hupp, Joseph T

    2015-04-21

    A system and method for systematically generating potential metal-organic framework (MOFs) structures given an input library of building blocks is provided herein. One or more material properties of the potential MOFs are evaluated using computational simulations. A range of material properties (surface area, pore volume, pore size distribution, powder x-ray diffraction pattern, methane adsorption capability, and the like) can be estimated, and in doing so, illuminate unidentified structure-property relationships that may only have been recognized by taking a global view of MOF structures. In addition to identifying structure-property relationships, this systematic approach to identify the MOFs of interest is used to identify one or more MOFs that may be useful for high pressure methane storage.

  2. A new method to position and functionalize metal-organic framework crystals

    PubMed Central

    Falcaro, Paolo; Hill, Anita J.; Nairn, Kate M.; Jasieniak, Jacek; Mardel, James I.; Bastow, Timothy J.; Mayo, Sheridan C.; Gimona, Michele; Gomez, Daniel; Whitfield, Harold J.; Riccò, Raffaele; Patelli, Alessandro; Marmiroli, Benedetta; Amenitsch, Heinz; Colson, Tobias; Villanova, Laura; Buso, Dario

    2011-01-01

    With controlled nanometre-sized pores and surface areas of thousands of square metres per gram, metal-organic frameworks (MOFs) may have an integral role in future catalysis, filtration and sensing applications. In general, for MOF-based device fabrication, well-organized or patterned MOF growth is required, and thus conventional synthetic routes are not suitable. Moreover, to expand their applicability, the introduction of additional functionality into MOFs is desirable. Here, we explore the use of nanostructured poly-hydrate zinc phosphate (α-hopeite) microparticles as nucleation seeds for MOFs that simultaneously address all these issues. Affording spatial control of nucleation and significantly accelerating MOF growth, these α-hopeite microparticles are found to act as nucleation agents both in solution and on solid surfaces. In addition, the introduction of functional nanoparticles (metallic, semiconducting, polymeric) into these nucleating seeds translates directly to the fabrication of functional MOFs suitable for molecular size-selective applications. PMID:21407203

  3. NMR relaxation and exchange in metal-organic frameworks for surface area screening

    SciTech Connect

    Chen, JJ; Mason, JA; Bloch, ED; Gygi, D; Long, JR; Reimer, JA

    2015-03-15

    We describe a robust screening technique that correlates the surface area of metal organic frameworks to the proton T-2 relaxation behavior of imbibed solvent at low field (13 MHz). In frameworks with small pore sizes (<1 nm) or strong solvent-framework interactions, diffusional exchange between the pore-confined and inter-particle solvent populations remains slow compared to the T-2 of the pore-confined solvent, allowing for a direct porosity analysis of the T-2 spectrum obtained from Laplace inversions. Increases in framework pore-size (>1 nm) lead to corresponding increases in the rate of solvent exchange, as confirmed by T-2 relaxation exchange (REXSY) experiments; increases in the pore size also increases the T-2 of the pore-confined solvent. The combination of these two effects results in comparable rates of relaxation and exchange, which precludes the direct analysis of Laplace inversions. Thus, two- and three-site kinetics models were applied to extract porosity from relaxation decays, thereby improving the utility of the porosity screening tool. (C) 2014 Elsevier Inc. All rights reserved.

  4. Functionalization of Metal-Organic Frameworks for Enhanced Stability under Humid Carbon Dioxide Capture Conditions.

    PubMed

    Andirova, Dinara; Lei, Yu; Zhao, Xiaodan; Choi, Sunho

    2015-10-26

    Metal-organic frameworks (MOFs) have been highlighted recently as promising materials for CO2 capture. However, in practical CO2 capture processes, such as capture from flue gas or ambient air, the adsorption properties of MOFs tend to be harmed by the presence of moisture possibly because of the hydrophilic nature of the coordinatively unsaturated sites (CUSs) within their framework. In this work, the CUSs of the MOF framework are functionalized with amine-containing molecules to prevent structural degradation in a humid environment. Specifically, the framework of the magnesium dioxybenzenedicarboxylate (Mg/DOBDC) MOF was functionalized with ethylenediamine (ED) molecules to make the overall structure less hydrophilic. Structural analysis after exposure to high-temperature steam showed that the ED-functionalized Mg/DOBDC (ED-Mg/DOBDC) is more stable under humid conditions, than Mg/DOBDC, which underwent drastic structural changes. ED-Mg/DOBDC recovered its CO2 adsorption capacity and initial adsorption rate quite well as opposed to the original Mg/DOBDC, which revealed a significant reduction in its capture capacity and kinetics. These results suggest that the amine-functionalization of the CUSs is an effective way to enhance the structural stability of MOFs as well as their capture of humid CO2 .

  5. Methane storage in flexible metal-organic frameworks with intrinsic thermal management

    NASA Astrophysics Data System (ADS)

    Mason, Jarad A.; Oktawiec, Julia; Taylor, Mercedes K.; Hudson, Matthew R.; Rodriguez, Julien; Bachman, Jonathan E.; Gonzalez, Miguel I.; Cervellino, Antonio; Guagliardi, Antonietta; Brown, Craig M.; Llewellyn, Philip L.; Masciocchi, Norberto; Long, Jeffrey R.

    2015-11-01

    As a cleaner, cheaper, and more globally evenly distributed fuel, natural gas has considerable environmental, economic, and political advantages over petroleum as a source of energy for the transportation sector. Despite these benefits, its low volumetric energy density at ambient temperature and pressure presents substantial challenges, particularly for light-duty vehicles with little space available for on-board fuel storage. Adsorbed natural gas systems have the potential to store high densities of methane (CH4, the principal component of natural gas) within a porous material at ambient temperature and moderate pressures. Although activated carbons, zeolites, and metal-organic frameworks have been investigated extensively for CH4 storage, there are practical challenges involved in designing systems with high capacities and in managing the thermal fluctuations associated with adsorbing and desorbing gas from the adsorbent. Here, we use a reversible phase transition in a metal-organic framework to maximize the deliverable capacity of CH4 while also providing internal heat management during adsorption and desorption. In particular, the flexible compounds Fe(bdp) and Co(bdp) (bdp2- = 1,4-benzenedipyrazolate) are shown to undergo a structural phase transition in response to specific CH4 pressures, resulting in adsorption and desorption isotherms that feature a sharp ‘step’. Such behaviour enables greater storage capacities than have been achieved for classical adsorbents, while also reducing the amount of heat released during adsorption and the impact of cooling during desorption. The pressure and energy associated with the phase transition can be tuned either chemically or by application of mechanical pressure.

  6. Methane storage in flexible metal-organic frameworks with intrinsic thermal management.

    PubMed

    Mason, Jarad A; Oktawiec, Julia; Taylor, Mercedes K; Hudson, Matthew R; Rodriguez, Julien; Bachman, Jonathan E; Gonzalez, Miguel I; Cervellino, Antonio; Guagliardi, Antonietta; Brown, Craig M; Llewellyn, Philip L; Masciocchi, Norberto; Long, Jeffrey R

    2015-11-19

    As a cleaner, cheaper, and more globally evenly distributed fuel, natural gas has considerable environmental, economic, and political advantages over petroleum as a source of energy for the transportation sector. Despite these benefits, its low volumetric energy density at ambient temperature and pressure presents substantial challenges, particularly for light-duty vehicles with little space available for on-board fuel storage. Adsorbed natural gas systems have the potential to store high densities of methane (CH4, the principal component of natural gas) within a porous material at ambient temperature and moderate pressures. Although activated carbons, zeolites, and metal-organic frameworks have been investigated extensively for CH4 storage, there are practical challenges involved in designing systems with high capacities and in managing the thermal fluctuations associated with adsorbing and desorbing gas from the adsorbent. Here, we use a reversible phase transition in a metal-organic framework to maximize the deliverable capacity of CH4 while also providing internal heat management during adsorption and desorption. In particular, the flexible compounds Fe(bdp) and Co(bdp) (bdp(2-) = 1,4-benzenedipyrazolate) are shown to undergo a structural phase transition in response to specific CH4 pressures, resulting in adsorption and desorption isotherms that feature a sharp 'step'. Such behaviour enables greater storage capacities than have been achieved for classical adsorbents, while also reducing the amount of heat released during adsorption and the impact of cooling during desorption. The pressure and energy associated with the phase transition can be tuned either chemically or by application of mechanical pressure.

  7. Formation mechanism of the secondary building unit in a chromium terephthalate metal-organic framework

    SciTech Connect

    Cantu Cantu, David; McGrail, B. Peter; Glezakou, Vassiliki Alexandra

    2014-09-18

    Based on density functional theory calculations and simulation, a detailed mechanism is presented on the formation of the secondary building unit (SBU) of MIL-101, a chromium terephthalate metal-organic framework (MOF). SBU formation is key to MOF nucleation, the rate-limiting step in the formation process of many MOFs. A series of reactions that lead to the formation of the SBU of MIL-101 is proposed in this work. Initial rate-limiting reactions form the metal cluster with three chromium (III) atoms linked to a central bridging oxygen. Terephthalate linkers play a key role as chromium (III) atoms are joined to linker carboxylate groups prior to the placement of the central bridging oxygen. Multiple linker addition reactions, which follow in different paths due to structural isomers, are limited by the removal of water molecules in the first chromium coordination shell. The least energy path is identified were all linkers on one face of the metal center plane are added first. A simple kinetic model based on transition state theory shows the rate of secondary building unit formation similar to the rate metal-organic framework nucleation. The authors are thankful to Dr. R. Rousseau for a critical reading of the manuscript. This research would not have been possible without the support of the Office of Fossil Energy, U.S. Department of Energy. This research was performed using EMSL, a national scientific user facility sponsored by the Department of Energy's Office of Biological and Environmental Research and the PNNL Institutional Computing (PIC) program located at Pacific Northwest National Laboratory.

  8. A multifunctional metal-organic framework based tumor targeting drug delivery system for cancer therapy

    NASA Astrophysics Data System (ADS)

    Wang, Xiao-Gang; Dong, Zhi-Yue; Cheng, Hong; Wan, Shuang-Shuang; Chen, Wei-Hai; Zou, Mei-Zhen; Huo, Jia-Wei; Deng, He-Xiang; Zhang, Xian-Zheng

    2015-09-01

    Drug delivery systems (DDSs) with biocompatibility and precise drug delivery are eagerly needed to overcome the paradox in chemotherapy that high drug doses are required to compensate for the poor biodistribution of drugs with frequent dose-related side effects. In this work, we reported a metal-organic framework (MOF) based tumor targeting DDS developed by a one-pot, and organic solvent-free ``green'' post-synthetic surface modification procedure, starting from the nanoscale MOF MIL-101. Owing to the multifunctional surface coating, premature drug release from this DDS was prevented. Due to the pH responsive benzoic imine bond and the redox responsive disulfide bond at the modified surface, this DDS exhibited tumor acid environment enhanced cellular uptake and intracellular reducing environment triggered drug release. In vitro and in vivo results showed that DOX loaded into this DDS exhibited effective cancer cell inhibition with much reduced side effects.Drug delivery systems (DDSs) with biocompatibility and precise drug delivery are eagerly needed to overcome the paradox in chemotherapy that high drug doses are required to compensate for the poor biodistribution of drugs with frequent dose-related side effects. In this work, we reported a metal-organic framework (MOF) based tumor targeting DDS developed by a one-pot, and organic solvent-free ``green'' post-synthetic surface modification procedure, starting from the nanoscale MOF MIL-101. Owing to the multifunctional surface coating, premature drug release from this DDS was prevented. Due to the pH responsive benzoic imine bond and the redox responsive disulfide bond at the modified surface, this DDS exhibited tumor acid environment enhanced cellular uptake and intracellular reducing environment triggered drug release. In vitro and in vivo results showed that DOX loaded into this DDS exhibited effective cancer cell inhibition with much reduced side effects. Electronic supplementary information (ESI) available

  9. Continuous-Flow Microwave Synthesis of Metal-Organic Frameworks: A Highly Efficient Method for Large-Scale Production.

    PubMed

    Taddei, Marco; Steitz, Daniel Antti; van Bokhoven, Jeroen Anton; Ranocchiari, Marco

    2016-03-01

    Metal-organic frameworks are having a tremendous impact on novel strategic applications, with prospective employment in industrially relevant processes. The development of such processes is strictly dependent on the ability to generate materials with high yield efficiency and production rate. We report a versatile and highly efficient method for synthesis of metal-organic frameworks in large quantities using continuous flow processing under microwave irradiation. Benchmark materials such as UiO-66, MIL-53(Al), and HKUST-1 were obtained with remarkable mass, space-time yields, and often using stoichiometric amounts of reactants. In the case of UiO-66 and MIL-53(Al), we attained unprecedented space-time yields far greater than those reported previously. All of the syntheses were successfully extended to multi-gram high quality products in a matter of minutes, proving the effectiveness of continuous flow microwave technology for the large scale production of metal-organic frameworks.

  10. Embedding Knowledge in 3D Data Frameworks in Cultural Heritage

    NASA Astrophysics Data System (ADS)

    Coughenour, C. M.; Vincent, M. L.; de Kramer, M.; Senecal, S.; Fritsch, D.; Flores Gutirrez, M.; Lopez-Menchero Bendicho, V. M.; Ioannides, M.

    2015-08-01

    At present, where 3D modeling and visualisation in cultural heritage are concerned, an object's documentation lacks its interconnected memory provided by multidisciplinary examination and linked data. As the layers of paint, wood, and brick recount a structure's physical properties, the intangible, such as the forms of worship through song, dance, burning incense, and oral traditions, contributes to the greater story of its cultural heritage import. Furthermore, as an object or structure evolves through time, external political, religious, or environmental forces can affect it as well. As tangible and intangible entities associated with the structure transform, its narrative becomes dynamic and difficult to easily record. The Initial Training Network for Digital Cultural Heritage (ITN-DCH), a Marie Curie Actions project under the EU 7th Framework Programme, seeks to challenge this complexity by developing a novel methodology capable of offering such a holistic framework. With the integration of digitisation, conservation, linked data, and retrieval systems for DCH, the nature of investigation and dissemination will be augmented significantly. Examples of utilisating and evaluating this framework will range from a UNESCOWorld Heritage site, the Byzantine church of Panagia Forviotissa Asinou in the Troodos Mountains of Cyprus, to various religious icons and a monument located at the Monastery of Saint Neophytos. The application of this effort to the Asinou church, representing the first case study of the ITN-DCH project, is used as a template example in order to assess the technical challenges involved in the creation of such a framework.

  11. Nanoscale Fluorescent Metal-Organic Framework@Microporous Organic Polymer Composites for Enhanced Intracellular Uptake and Bioimaging.

    PubMed

    Wang, Lei; Wang, Weiqi; Zheng, Xiaohua; Li, Zhensheng; Xie, Zhigang

    2017-01-26

    Polymer-modified metal-organic frameworks combine the advantages of both soft polymers and crystalline metal-organic frameworks (MOFs). It is a big challenge to develop simple methods for surface modification of MOFs. In this work, MOF@microporous organic polymer (MOP) hybrid nanoparticles (UNP) have been synthesized by epitaxial growth of luminescent boron-dipyrromethene (BODIPYs)-imine MOPs on the surface of UiO-MOF seeds, which exhibit low cytotoxicity, smaller size distribution, well-retained pore integrity, and available functional sites. After folic acid grafting, the enhanced intracellular uptake and bioimaging was validated.

  12. High performance hydrogen storage from Be-BTB metal-organic framework at room temperature.

    PubMed

    Lim, Wei-Xian; Thornton, Aaron W; Hill, Anita J; Cox, Barry J; Hill, James M; Hill, Matthew R

    2013-07-09

    The metal-organic framework beryllium benzene tribenzoate (Be-BTB) has recently been reported to have one of the highest gravimetric hydrogen uptakes at room temperature. Storage at room temperature is one of the key requirements for the practical viability of hydrogen-powered vehicles. Be-BTB has an exceptional 298 K storage capacity of 2.3 wt % hydrogen. This result is surprising given that the low adsorption enthalpy of 5.5 kJ mol(-1). In this work, a combination of atomistic simulation and continuum modeling reveals that the beryllium rings contribute strongly to the hydrogen interaction with the framework. These simulations are extended with a thermodynamic energy optimization (TEO) model to compare the performance of Be-BTB to a compressed H2 tank and benchmark materials MOF-5 and MOF-177 in a MOF-based fuel cell. Our investigation shows that none of the MOF-filled tanks satisfy the United States Department of Energy (DOE) storage targets within the required operating temperatures and pressures. However, the Be-BTB tank delivers the most energy per volume and mass compared to the other material-based storage tanks. The pore size and the framework mass are shown to be contributing factors responsible for the superior room temperature hydrogen adsorption of Be-BTB.

  13. Metallacarborane-Based Metal-Organic Framework with a Complex Topology

    SciTech Connect

    Kennedy, RD; Clingerman, DJ; Morris, W; Wilmer, CE; Sarjeant, AA; Stern, CL; O'Keeffe, M; Snurr, RQ; Hupp, JT; Farha, OK; Mirkin, CA

    2014-03-01

    The long, linear cobalt(III) bis(dicarbollide)-based bis(isophthalic acid) anion was synthesized as a tetraphenylphosphonium salt in five steps from 8-iodo-closo-1,2-C2B10H11. The solvothermal reaction between the anionic bis(isophthalic acid) linker and copper(II) nitrate in acidified DMF yielded single crystals. Despite the tendency for copper(II) and analogous linear tetraacids to form members of an isoreticular family of metal-organic frameworks (MOFs) with the fof topology, single-crystal X-ray diffraction analysis revealed the growth of three different frameworks. These MOFs, NU-150, NU-151, and NU-152, have three distinct topologies: fof, sty, and hbk, respectively. NU-152 has a novel quadrinodal topology in which cuboctahedral coordination polyhedra are each connected to 10 neighboring polyhedra via the cobalt bis(dicarbollide) portions of the linkers. The formation of these frameworks illustrates the limitations of structure prediction in MOP chemistry and the possibility of using flexible linkers to generate unexpected topologies. Furthermore, this work represents the first example of the incorporation of an anionic bis(dicarbollide) unit into a MOF.

  14. Research Update: Mechanical properties of metal-organic frameworks - Influence of structure and chemical bonding

    NASA Astrophysics Data System (ADS)

    Li, Wei; Henke, Sebastian; Cheetham, Anthony K.

    2014-12-01

    Metal-organic frameworks (MOFs), a young family of functional materials, have been attracting considerable attention from the chemistry, materials science, and physics communities. In the light of their potential applications in industry and technology, the fundamental mechanical properties of MOFs, which are of critical importance for manufacturing, processing, and performance, need to be addressed and understood. It has been widely accepted that the framework topology, which describes the overall connectivity pattern of the MOF building units, is of vital importance for the mechanical properties. However, recent advances in the area of MOF mechanics reveal that chemistry plays a major role as well. From the viewpoint of materials science, a deep understanding of the influence of chemical effects on MOF mechanics is not only highly desirable for the development of novel functional materials with targeted mechanical response, but also for a better understanding of important properties such as structural flexibility and framework breathing. The present work discusses the intrinsic connection between chemical effects and the mechanical behavior of MOFs through a number of prototypical examples.

  15. Structural Effects in Visible-Light-Responsive Metal-Organic Frameworks Incorporating ortho-Fluoroazobenzenes.

    PubMed

    Castellanos, Sonia; Goulet-Hanssens, Alexis; Zhao, Fangli; Dikhtiarenko, Alla; Pustovarenko, Alexey; Hecht, Stefan; Gascon, Jorge; Kapteijn, Freek; Bléger, David

    2016-01-11

    The ability to control the interplay of materials with low-energy photons is important as visible light offers several appealing features compared to ultraviolet radiation (less damaging, more selective, predominant in the solar spectrum, possibility to increase the penetration depth). Two different metal-organic frameworks (MOFs) were synthesized from the same linker bearing all-visible ortho-fluoroazobenzene photoswitches as pendant groups. The MOFs exhibit different architectures that strongly influence the ability of the azobenzenes to isomerize inside the voids. The framework built with Al-based nodes has congested 1D channels that preclude efficient isomerization. As a result, local light-heat conversion can be used to alter the CO2 adsorption capacity of the material on exposure to green light. The second framework, built with Zr nodes, provides enough room for the photoswitches to isomerize, which leads to a unique bistable photochromic MOF that readily responds to blue and green light. The superiority of green over UV irradiation was additionally demonstrated by reflectance spectroscopy and analysis of digested samples. This material offers promising perspectives for liquid-phase applications such as light-controlled catalysis and adsorptive separation.

  16. A copper based pillared-bilayer metal organic framework: its synthesis, sorption properties and catalytic performance.

    PubMed

    Parshamoni, Srinivasulu; Sanda, Suresh; Jena, Himanshu Sekhar; Konar, Sanjit

    2014-05-21

    A new 2D pillared-bilayer flexible open metal organic framework {[Cu(tdc)(bpe)]n·2n(H2O)·n(MeOH)} (compound 1) [H2tdc = 2,5 thiophenedicarboxylic acid; bpe = 1,2-bis(4-pyridyl)ethane] has been synthesized through a solvent diffusion technique and structurally characterized. The structure analysis reveals that the tdc ligands formed bilayers with the Cu(II) ions along the b-direction and the layers are further pillared by bpe linkers and resulted in a 2D pillared-bilayer porous framework with a four connected uninodal sq1/Shubnikob tetragonal plane net with the Schälfli symbol {4(4)·6(2)}. The framework is enclosed with large square shaped channels (13.7 × 8.35 Å(2)) along the bc-plane and the channels are occupied by guest solvent molecules. The adsorption studies reveal that compound 1 shows selective adsorption for CO2 over CH4 at room temperature and it also shows hysteretic sorption for a few protic solvents (H2O and EtOH) and a Type-1 isotherm for an aprotic solvent (CH3CN). The catalytic performance of compound 1 for Glaser type homo-coupling reactions has also been reported.

  17. Postsynthetic Improvement of the Physical Properties in a Metal-Organic Framework through a Single Crystal to Single Crystal Transmetallation.

    PubMed

    Grancha, Thais; Ferrando-Soria, Jesús; Zhou, Hong-Cai; Gascon, Jorge; Seoane, Beatriz; Pasán, Jorge; Fabelo, Oscar; Julve, Miguel; Pardo, Emilio

    2015-05-26

    A single crystal to single crystal transmetallation process takes place in the three-dimensional (3D) metal-organic framework (MOF) of formula Mg(II) 2 {Mg(II) 4 [Cu(II) 2 (Me3 mpba)2 ]3 }⋅45 H2 O (1; Me3 mpba(4-) =N,N'-2,4,6-trimethyl-1,3-phenylenebis(oxamate)). After complete replacement of the Mg(II) ions within the coordination network and those hosted in the channels by either Co(II) or Ni(II) ions, 1 is transmetallated to yield two novel MOFs of formulae Co2 (II) {Co(II) 4 [Cu(II) 2 (Me3 mpba)2 ]3 }⋅56 H2 O (2) and Ni2 (II) {Ni(II) 4 [Cu(II) 2 (Me3 mpba)2 ]3 }⋅ 54 H2 O (3). This unique postsynthetic metal substitution affords materials with higher structural stability leading to enhanced gas sorption and magnetic properties.

  18. Heterogeneous nano metal-organic framework fluorescence probe for highly selective and sensitive detection of hydrogen sulfide in living cells.

    PubMed

    Ma, Yu; Su, Hao; Kuang, Xuan; Li, Xiangyuan; Zhang, Tingting; Tang, Bo

    2014-11-18

    Hydrogen sulfide (H2S) has been regarded as the third important gaseous signaling molecule involved in human physiological and pathological processes. Due to the high reactive and diffusible properties of H2S, real-time detection of H2S fluctuations in living biological specimens is crucial. Here, we present a Cu(II)-metalated 3D porous nanoscale metal-organic framework (nano-MOF) {CuL[AlOH]2}n (PAC; H6L = meso-tetrakis(4-carboxylphenyl)porphyrin) and successfully employ this nano-MOF as a novel heterogeneous fluorescence probe for H2S detection. As far as we know, nano-MOFs have never been used as selective fluorescence probes for H2S detection. On the basis of the advantages of nano-MOF materials, this biocompatible nano-MOF probe exhibits rapid response, excellent selectivity, and hypotoxicity in in situ detection of H2S and represents the most sensitive fluorescence probe for selective H2S detection under physiological pH. In addition, confocal imaging was achieved successfully in living cells.

  19. From condiment to metal–organic framework and its derived 3D architecture nanoporous carbon for supercapacitor electrodes

    NASA Astrophysics Data System (ADS)

    Wang, Qiang; Lu, Xiaowang; Chen, Zhidong

    2017-02-01

    The crystalline metal-organic-framework (MOF) microrods from monosodium glutamate and zinc acetate dihydrate were spontaneously formed by mixing their solution at room temperature. After carbonization in an inert atmosphere, these MOF microrods are evolved into N and O co-doped nanoporous carbon with 3D-architecture. The model of gas bubbles is elucidated for the formation of these interconnected porous structure. As the electrode material for supercapacitor, the derived nanoporous carbon at the temperature of 800 °C exhibits good capacitance performance in alkali aqueous electrolyte.

  20. Predictive framework for shape-selective separations in three-dimensional zeolites and metal-organic frameworks.

    PubMed

    First, Eric L; Gounaris, Chrysanthos E; Floudas, Christodoulos A

    2013-05-07

    With the growing number of zeolites and metal-organic frameworks (MOFs) available, computational methods are needed to screen databases of structures to identify those most suitable for applications of interest. We have developed novel methods based on mathematical optimization to predict the shape selectivity of zeolites and MOFs in three dimensions by considering the energy costs of transport through possible pathways. Our approach is applied to databases of over 1800 microporous materials including zeolites, MOFs, zeolitic imidazolate frameworks, and hypothetical MOFs. New materials are identified for applications in gas separations (CO2/N2, CO2/CH4, and CO2/H2), air separation (O2/N2), and chemicals (propane/propylene, ethane/ethylene, styrene/ethylbenzene, and xylenes).

  1. Polyoxometalate-based metal organic frameworks (POMOFs): structural trends, energetics, and high electrocatalytic efficiency for hydrogen evolution reaction.

    PubMed

    Nohra, Brigitte; El Moll, Hani; Rodriguez Albelo, L Marleny; Mialane, Pierre; Marrot, Jérôme; Mellot-Draznieks, Caroline; O'Keeffe, Michael; Ngo Biboum, Rosa; Lemaire, Joël; Keita, Bineta; Nadjo, Louis; Dolbecq, Anne

    2011-08-31

    The grafting of the triangular 1,3,5-benzene tricarboxylate linkers (denoted trim) on tetrahedral ε-Keggin polyoxometalates (POMs) capped by Zn(II) ions, formed in situ under hydrothermal conditions, has generated three novel POM-based metal organic frameworks (POMOFs). (TBA)(3)[PMo(V)(8)Mo(VI)(4)O(36)(OH)(4)Zn(4)][C(6)H(3)(COO)(3)](4/3)·6H(2)O (ε(trim)(4/3)) is a 3D open-framework built of molecular Keggin units connected by trim linkers, with channels occupied by tetrabutylammonium (TBA) counterions. ε(trim)(4/3) is a novel (3,4)-connected net, named ofp for open-framework polyoxometalate, and computer simulations have been used to evaluate its relative stability in comparison with ctn- and bor-like polymorphs, showing the stability of this novel phase directly related to its greatest density. A computational study was also undertaken with the aim of locating TBA molecules, the positions of which could not be deduced from single crystal X-ray diffraction, and further rationalizes their structure directing role. In (TBA)(3)[PMo(V)(8)Mo(VI)(4)O(37)(OH)(3)Zn(4)][C(6)H(3)(COO)(3)] (ε(2)(trim)(2)), the building unit is not the molecular Keggin but a dimerized form of this POM. Their connection via trim linkers generates a 3D framework with channels filled by TBA cations. In (TBA)(3)[PMo(V)(8)Mo(VI)(4)O(37)(OH)(3)Zn(4)][C(6)H(3)(COO)(3)]·8H(2)O ([ε(trim)](∞)), zigzag chains are connected via the organic linkers, forming 2D grids. Modified electrodes were fabricated by direct adsorption of the POMOFs on glassy carbon or entrapment in carbon paste (CPE). A remarkable electrocatalytic hydrogen evolution reaction (HER) was detected with a yield greater than 95%, and a turnover number as high as 1.2 × 10(5) was obtained after 5 h. The reported POMOF-based electrodes are more active than platinum, with a roughly 260 mV anodic shift. Finally, the electrocatalytic activities of ε(trim)(4/3)/CPE electrodes in various XCl (X = Li, Na, K, Cs) media have been studied

  2. A novel nickel metal-organic framework with fluorite-like structure: gas adsorption properties and catalytic activity in Knoevenagel condensation.

    PubMed

    Almáši, Miroslav; Zeleňák, Vladimír; Opanasenko, Maksym; Cejka, Jíří

    2014-03-07

    A new non-interpenetrating 3D metal-organic framework {[Ni4(μ6-MTB)2(μ2-H2O)4(H2O)4]·10DMF·11H2O}n (DMF = N,N'-dimethylformamide) built from nickel(ii) ions as connectors and methanetetrabenzoate ligands (MTB(4-)) as linkers has been synthesized and characterized. The single crystal X-ray diffraction showed that complex exhibits CaF2-like fluorite structure topology and four types of 3D channels with sizes about 12.6 × 9.4 Å(2), 9.4 × 8.0 Å(2), 12.6 × 11.7 Å(2) and 14.9 × 14.9 Å(2), which are filled with guest molecules. Conditions of the activation of the compound have been studied and optimized by powder X-ray diffraction during in situ heating, thermogravimetric analysis and infrared spectroscopy. Nitrogen and carbon dioxide adsorption showed that the activated sample exhibits a BET specific surface area of 700 m(2) g(-1) and a carbon dioxide uptake of 12.36 wt% at 0 °C, which are the highest values reported for the compounds of the MTB(4-) series. The complex was tested in Knoevenagel condensation of aldehydes and active methylene compounds. Straightforward dependence of the substrate conversion on the size of used aldehyde was established. A possible mechanism of Knoevenagel condensation over a MTB(4-) containing a metal-organic framework was proposed.

  3. Exceptionally Low Shear Modulus in a Prototypical Imidazole-Based Metal-Organic Framework

    NASA Astrophysics Data System (ADS)

    Tan, Jin-Chong; Civalleri, Bartolomeo; Lin, Chung-Cherng; Valenzano, Loredana; Galvelis, Raimondas; Chen, Po-Fei; Bennett, Thomas D.; Mellot-Draznieks, Caroline; Zicovich-Wilson, Claudio M.; Cheetham, Anthony K.

    2012-03-01

    Using Brillouin scattering, we measured the single-crystal elastic constants (Cij’s) of a prototypical metal-organic framework (MOF): zeolitic imidazolate framework (ZIF)-8 [Zn(2-methylimidazolate)2], which adopts a zeolitic sodalite topology and exhibits large porosity. Its Cij’s under ambient conditions are (in GPa) C11=9.522(7), C12=6.865(14), and C44=0.967(4). Tensorial analysis of the Cij’s reveals the complete picture of the anisotropic elasticity in cubic ZIF-8. We show that ZIF-8 has a remarkably low shear modulus Gmin⁡≲1GPa, which is the lowest yet reported for a single-crystalline extended solid. Using ab initio calculations, we demonstrate that ZIF-8’s Cij’s can be reliably predicted, and its elastic deformation mechanism is linked to the pliant ZnN4 tetrahedra. Our results shed new light on the role of elastic constants in establishing the structural stability of MOF materials and thus their suitability for practical applications.

  4. Liquid chromatographic separation in metal-organic framework MIL-101: a molecular simulation study.

    PubMed

    Hu, Zhongqiao; Chen, Yifei; Jiang, Jianwen

    2013-02-05

    A molecular simulation study is reported to investigate liquid chromatographic separation in metal-organic framework MIL-101. Two mixtures are considered: three amino acids (Arg, Phe, and Trp) in aqueous solution and three xylene isomers (p-, m-, and o-xylene) dissolved in hexane. For the first mixture, the elution order is found to be Arg > Phe > Trp. The hydrophilic Arg has the strongest interaction with the polar mobile phase (water) and the weakest interaction with the stationary phase (MIL-101), and thus transports at the fastest velocity. Furthermore, Arg forms the largest number of hydrogen bonds with water and possesses the largest hydrophilic solvent-accessible surface area. For the second mixture, the elution order is p-xylene > m-xylene > o-xylene, consistent with available experimental observation. With the largest polarity as compared to p- and m-xylenes, o-xylene interacts the most strongly with the stationary phase and exhibits the slowest transport velocity. For both mixtures, the underlying separation mechanism is elucidated from detailed energetic and structural analysis. It is revealed that the separation can be attributed to the cooperative solute-solvent and solute-framework interactions. This simulation study, for the first time, provides molecular insight into liquid chromatographic separation in a MOF and suggests that MIL-101 might be an interesting material for the separation of industrially important liquid mixtures.

  5. Metal-Organic Frameworks: Literature Survey and Recommendation of Potential Sorbent Materials

    SciTech Connect

    Baumann, T F

    2010-04-29

    Metal-organic frameworks (MOFs) are a special type of porous material with a number of unique properties, including exceptionally high surface areas, large internal pore volumes (void space) and tunable pore sizes. These materials are prepared through the assembly of molecular building blocks into ordered three-dimensional structures. The bulk properties of the MOF are determined by the nature of the building blocks and, as such, these materials can be designed with special characteristics that cannot be realized in other sorbent materials, like activated carbons. For example, MOFs can be constructed with binding sites or pockets that can exhibit selectivity for specific analytes. Alternatively, the framework can be engineered to undergo reversible dimensional changes (or 'breathing') upon interaction with an analyte, effectively trapping the molecule of interest in the lattice structure. In this report, we have surveyed the 4000 different MOF structures reported in the open literature and provided recommendations for specific MOF materials that should be investigated as sorbents for this project.

  6. Osteogenic activity and antibacterial effect of porous titanium modified with metal-organic framework films.

    PubMed

    Chen, Junyu; Zhang, Xin; Huang, Chao; Cai, He; Hu, Shanshan; Wan, Qianbing; Pei, Xibo; Wang, Jian

    2017-03-01

    As a new class of crystalline nanoporous materials, metal-organic frameworks (MOFs) have recently been used for biomedical applications due to their large surface area, high porosity, and theoretically infinite structures. To improve the biological performance of titanium, MOF films were applied to surface modification of titanium. Zn-based MOF films composed of zeolitic imidazolate framework-8 (ZIF-8) crystals with nanoscale and microscale sizes (nanoZIF-8 and microZIF-8) were prepared on porous titanium surfaces by hydrothermal and solvothermal methods, respectively. The ZIF-8 films were characterized by powder X-ray diffraction (PXRD), Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM). The nanoZIF-8 film exhibited good biocompatibility, whereas the microZIF-8 film showed obvious cytotoxicity to MG63 cells. Compared to pure titanium and alkali- and heat-treated porous titanium, the nanoZIF-8 film not only enhanced alkaline phosphatase (ALP) activity, extracellular matrix mineralization, and expression of osteogenic genes (ALP, Runx2) in MG63 cells but also inhibited the growth of Streptococcus mutans. These results indicate that MOF films or coatings may be promising candidates for bone tissue engineering. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 834-846, 2017.

  7. Highly stable crystalline catalysts based on a microporous metal-organic framework and polyoxometalates.

    PubMed

    Sun, Chun-Yan; Liu, Shu-Xia; Liang, Da-Dong; Shao, Kui-Zhan; Ren, Yuan-Hang; Su, Zhong-Min

    2009-02-11

    A series of remarkable crystalline compounds [Cu(2)(BTC)(4/3)(H(2)O)(2)](6)[H(n)XM(12)O(40)].(C(4)H(12)N)(2) (X = Si, Ge, P, As; M = W, Mo) were obtained from the simple one-step hydrothermal reaction of copper nitrate, benzentricaboxylate (BTC), and different Keggin polyoxometalates (POMs). In these compounds, the catalytically active Keggin polyanions were alternately arrayed as noncoordinating guests in the cuboctahedral cages of a Cu-BTC-based metal-organic framework (MOF) host matrix. X-ray crystallographic analyses, TG, FT-IR, UV-vis, N(2) adsorption studies, and acid-base titration demonstrated their high stability and toleration for thermal and acid-base conditions. No POM leaching or framework decomposition was observed in our study. The representative acid catalytic performance of a compound containing PW(12) species was assessed through the hydrolysis of esters in excess water, which showed high catalytic activity and can be used repeatedly without activity loss. Moreover, catalytic selectivity, which is dependent on the molecular size of substrates, and substrate accessibility for the pore surface were observed. It is the first time that the well-defined, crystalline, MOF-supported POM compound has behaved as a true heterogeneous acid catalyst. The unique attributes of MOF and well-dispersed level of POMs prohibited the conglomeration and deactivation of POMs, which allowed for the enhancement of their catalytic properties.

  8. Computational screening of large molecule adsorption by metal-organic frameworks.

    SciTech Connect

    Allendorf, Mark D.; Greathouse, Jeffery A.

    2010-04-01

    Grand canonical Monte Carlo simulations were performed to investigate trends in low-pressure adsorption of a broad range of organic molecules by a set of metal-organic frameworks (MOFs). The organic analytes considered here are relevant to applications in chemical detection: small aromatics (o-, m-, and p-xylene), polycyclic aromatic hydrocarbons (naphthalene, anthracene, phenanthrene), explosives (TNT and RDX), and chemical warfare agents (GA and VM). The framework materials included several Zn-MOFs (IRMOFs 1-3, 7, 8), a Cr-MOF (CrMIL-53lp), and a Cu-MOF (HKUST-1). Many of the larger organics were significantly adsorbed by the target MOFs at low pressure, which is consistent with the exceptionally high isosteric heats of adsorption (25 kcal/mol - 60 kcal/mol) for this range of analyte. At a higher loading pressure of 101 kPa, the Zn-MOFs show a much higher volumetric uptake than either CrMIL-53-lp or HKUST-1 for all types of analyte. Within the Zn-MOF series, analyte loading is proportional to free volume, and loading decreases with increasing analyte size due to molecular packing effects. CrMIL-53lp showed the highest adsorption energy for all analytes, suggesting that this material may be suitable for low-level detection of organics.

  9. Cooperative insertion of CO2 in diamine-appended metal-organic frameworks.

    PubMed

    McDonald, Thomas M; Mason, Jarad A; Kong, Xueqian; Bloch, Eric D; Gygi, David; Dani, Alessandro; Crocellà, Valentina; Giordanino, Filippo; Odoh, Samuel O; Drisdell, Walter S; Vlaisavljevich, Bess; Dzubak, Allison L; Poloni, Roberta; Schnell, Sondre K; Planas, Nora; Lee, Kyuho; Pascal, Tod; Wan, Liwen F; Prendergast, David; Neaton, Jeffrey B; Smit, Berend; Kortright, Jeffrey B; Gagliardi, Laura; Bordiga, Silvia; Reimer, Jeffrey A; Long, Jeffrey R

    2015-03-19

    The process of carbon capture and sequestration has been proposed as a method of mitigating the build-up of greenhouse gases in the atmosphere. If implemented, the cost of electricity generated by a fossil fuel-burning power plant would rise substantially, owing to the expense of removing CO2 from the effluent stream. There is therefore an urgent need for more efficient gas separation technologies, such as those potentially offered by advanced solid adsorbents. Here we show that diamine-appended metal-organic frameworks can behave as 'phase-change' adsorbents, with unusual step-shaped CO2 adsorption isotherms that shift markedly with temperature. Results from spectroscopic, diffraction and computational studies show that the origin of the sharp adsorption step is an unprecedented cooperative process in which, above a metal-dependent threshold pressure, CO2 molecules insert into metal-amine bonds, inducing a reorganization of the amines into well-ordered chains of ammonium carbamate. As a consequence, large CO2 separation capacities can be achieved with small temperature swings, and regeneration energies appreciably lower than achievable with state-of-the-art aqueous amine solutions become feasible. The results provide a mechanistic framework for designing highly efficient adsorbents for removing CO2 from various gas mixtures, and yield insights into the conservation of Mg(2+) within the ribulose-1,5-bisphosphate carboxylase/oxygenase family of enzymes.

  10. A molecular shuttle that operates inside a metal-organic framework

    NASA Astrophysics Data System (ADS)

    Zhu, Kelong; O'Keefe, Christopher A.; Vukotic, V. Nicholas; Schurko, Robert W.; Loeb, Stephen J.

    2015-06-01

    A ‘molecular shuttle’ is an interlocked molecular assembly in which a macrocyclic ring is able to move back and forth between two recognition sites. This large-amplitude translational motion was first characterized in solution in 1991. Since that report, many mechanically interlocked molecules (MIMs) have been designed, synthesized and shown to mimic the complex functions of macroscopic switches and machines. Here, we show that this fundamental concept—the translational motion of a molecular shuttle—can be organized, initiated and made to operate inside a crystalline, solid-state material. A metal-organic framework (MOF) designated UWDM-4 was prepared that contains a rigid linker that is a molecular shuttle. It was demonstrated by variable-temperature 1H-13C cross-polarization/magic-angle spinning (CP/MAS) and 13C 2D exchange correlation spectroscopy (EXSY) solid-state NMR at 21.1 T on a 13C-enriched sample that the macrocyclic ring undergoes rapid shuttling along the rigid axle built between struts of the framework.

  11. Sulfation of metal-organic framework: Opportunities for acid catalysis and proton conductivity

    SciTech Connect

    Goesten, M.G.; Stavitski, E.; Juan-Alcaniz, J.; Ramos-Fernandez, E.V.; Sai Sankar Gupta, K.B.; van Bekkum, H.; Gascon, J. and Kapteijn, F.

    2011-05-24

    A new post-functionalization method for metal-organic frameworks (MOFs) has been developed to introduce acidity for catalysis. Upon treatment with a mixture of triflic anhydride and sulfuric acid, chemically stable MOF structures MIL-101(Cr) and MIL-53(Al) can be sulfated, resulting in a Broensted sulfoxy acid group attached to up to 50% of the aromatic terephthalate linkers of the structure. The sulfated samples have been extensively characterized by solid-state NMR, XANES, and FTIR spectroscopy. The functionalized acidic frameworks show catalytic activity similar to that of acidic polymers like Nafion{reg_sign} display in the esterification of n-butanol with acetic acid (TOF {approx} 1 min{sup -1} {at} 343 K). Water adsorbs strongly up to 4 molecules per sulfoxy acid group, and an additional 2 molecules are taken up at lower temperatures in the 1-D pore channels of S-MIL-53(Al). The high water content and Broensted acidity provide the structure S-MIL-53(Al) a high proton conductivity up to moderate temperatures.

  12. Light Hydrocarbon Adsorption Mechanisms in Two Calcium-Based Microporous Metal Organic Frameworks

    SciTech Connect

    Plonka, Anna M.; Chen, Xianyin; Wang, Hao; Krishna, Rajamani; Dong, Xinglong; Banerjee, Debasis; Woerner, William R.; Han, Yu; Li, Jing; Parise, John B.

    2016-01-25

    The adsorption mechanism of ethane, ethylene, and acetylene (C2Hn; n = 2, 4, 6) on two microporous metal organic frameworks (MOFs) is described here that is consistent with observations from single crystal and powder X-ray diffraction, calorimetric measurements, and gas adsorption isotherm measurements. Two calcium-based MOFs, designated as SBMOF-1 and SBMOF-2 (SB: Stony Brook), form three-dimensional frameworks with one-dimensional open channels. As determined from single crystal diffraction experiments, channel geometries of both SBMOF-1 and SBMOF-2 provide multiple adsorption sites for hydrocarbon molecules through C–H···π and C–H···O interactions, similarly to interactions in the molecular and protein crystals. In conclusion, both materials selectively adsorb C2 hydrocarbon gases over methane as determined with IAST and breakthrough calculations as well as experimental breakthrough measurements, with C2H6/CH4 selectivity as high as 74 in SBMOF-1.

  13. Light Hydrocarbon Adsorption Mechanisms in Two Calcium-Based Microporous Metal Organic Frameworks

    DOE PAGES

    Plonka, Anna M.; Chen, Xianyin; Wang, Hao; ...

    2016-01-25

    The adsorption mechanism of ethane, ethylene, and acetylene (C2Hn; n = 2, 4, 6) on two microporous metal organic frameworks (MOFs) is described here that is consistent with observations from single crystal and powder X-ray diffraction, calorimetric measurements, and gas adsorption isotherm measurements. Two calcium-based MOFs, designated as SBMOF-1 and SBMOF-2 (SB: Stony Brook), form three-dimensional frameworks with one-dimensional open channels. As determined from single crystal diffraction experiments, channel geometries of both SBMOF-1 and SBMOF-2 provide multiple adsorption sites for hydrocarbon molecules through C–H···π and C–H···O interactions, similarly to interactions in the molecular and protein crystals. In conclusion, both materialsmore » selectively adsorb C2 hydrocarbon gases over methane as determined with IAST and breakthrough calculations as well as experimental breakthrough measurements, with C2H6/CH4 selectivity as high as 74 in SBMOF-1.« less

  14. Incorporation of Molecular Catalysts in Metal-Organic Frameworks for Highly Efficient Heterogeneous Catalysis.

    PubMed

    Wu, Chuan-De; Zhao, Min

    2017-03-03

    Porous metal-organic frameworks (MOFs) are built from periodically alternate organic moieties and metal ions/clusters. The unique features of the open framework structures, the high surface areas, the permanent porosity, and the appropriate hydrophilic and hydrophobic pore nature mean that MOF materials are a class of ideal host matrices for immobilization of molecular catalysts. The emerging porous materials can not only retain but are also able to enhance the catalytic functions of the single individuals. MOF catalysts have the following super characters: i) uniformly dispersed catalytic sites on the pore surfaces to improve the utility, ii) appropriate hydrophilic and hydrophobic pore nature to facilitate the recognition and transportation of reactant and product molecules, iii) a collaborative microenvironment to realize synergistic catalysis, and iv) simple separation and recovery for long-term usage. Accompanying the development of the synthetic strategies and the technologies for the characterization of MOF materials, MOF catalysis has undergone an upsurge, which has transcended the stage of opportunism. Here, the rational design and synthesis of MOF catalysts are discussed, along with the key factors of active sites, microenvironments, and transmission channels that lead to the distinct catalytic properties of MOF catalysts.

  15. Cooperative insertion of CO2 in diamine-appended metal-organic frameworks

    NASA Astrophysics Data System (ADS)

    McDonald, Thomas M.; Mason, Jarad A.; Kong, Xueqian; Bloch, Eric D.; Gygi, David; Dani, Alessandro; Crocellà, Valentina; Giordanino, Filippo; Odoh, Samuel O.; Drisdell, Walter S.; Vlaisavljevich, Bess; Dzubak, Allison L.; Poloni, Roberta; Schnell, Sondre K.; Planas, Nora; Lee, Kyuho; Pascal, Tod; Wan, Liwen F.; Prendergast, David; Neaton, Jeffrey B.; Smit, Berend; Kortright, Jeffrey B.; Gagliardi, Laura; Bordiga, Silvia; Reimer, Jeffrey A.; Long, Jeffrey R.

    2015-03-01

    The process of carbon capture and sequestration has been proposed as a method of mitigating the build-up of greenhouse gases in the atmosphere. If implemented, the cost of electricity generated by a fossil fuel-burning power plant would rise substantially, owing to the expense of removing CO2 from the effluent stream. There is therefore an urgent need for more efficient gas separation technologies, such as those potentially offered by advanced solid adsorbents. Here we show that diamine-appended metal-organic frameworks can behave as `phase-change' adsorbents, with unusual step-shaped CO2 adsorption isotherms that shift markedly with temperature. Results from spectroscopic, diffraction and computational studies show that the origin of the sharp adsorption step is an unprecedented cooperative process in which, above a metal-dependent threshold pressure, CO2 molecules insert into metal-amine bonds, inducing a reorganization of the amines into well-ordered chains of ammonium carbamate. As a consequence, large CO2 separation capacities can be achieved with small temperature swings, and regeneration energies appreciably lower than achievable with state-of-the-art aqueous amine solutions become feasible. The results provide a mechanistic framework for designing highly efficient adsorbents for removing CO2 from various gas mixtures, and yield insights into the conservation of Mg2+ within the ribulose-1,5-bisphosphate carboxylase/oxygenase family of enzymes.

  16. Unravelling surface and interfacial structures of a metal-organic framework by transmission electron microscopy.

    PubMed

    Zhu, Yihan; Ciston, Jim; Zheng, Bin; Miao, Xiaohe; Czarnik, Cory; Pan, Yichang; Sougrat, Rachid; Lai, Zhiping; Hsiung, Chia-En; Yao, Kexin; Pinnau, Ingo; Pan, Ming; Han, Yu

    2017-02-20

    Metal-organic frameworks (MOFs) are crystalline porous materials with designable topology, porosity and functionality, having promising applications in gas storage and separation, ion conduction and catalysis. It is challenging to observe MOFs with transmission electron microscopy (TEM) due to the extreme instability of MOFs upon electron beam irradiation. Here, we use a direct-detection electron-counting camera to acquire TEM images of the MOF ZIF-8 with an ultralow dose of 4.1 electrons per square ångström to retain the structural integrity. The obtained image involves structural information transferred up to 2.1 Å, allowing the resolution of individual atomic columns of Zn and organic linkers in the framework. Furthermore, TEM reveals important local structural features of ZIF-8 crystals that cannot be identified by diffraction techniques, including armchair-type surface terminations and coherent interfaces between assembled crystals. These observations allow us to understand how ZIF-8 crystals self-assemble and the subsequent influence of interfacial cavities on mass transport of guest molecules.

  17. Metal-organic framework ZIF-8 nanocrystals as pseudostationary phase for capillary electrokinetic chromatography.

    PubMed

    Li, Li-Man; Wang, He-Fang; Yan, Xiu-Ping

    2012-09-01

    The outstanding properties such as large surface area, diverse structure, and accessible tunnels and cages make metal organic frameworks (MOFs) attractive as novel separation media in separation sciences. However, the utilization of MOFs in EKC has not been reported before. Here we show the exploration of zeolitic imidazolate framework-8 (ZIF-8), one of famous MOFs, as the pseudostationary phase (PSP) in EKC. ZIF-8 nanocrystals were used as the PSP through dispersing in the running buffer (20 mM phosphate solution containing a 1% v/v methanol (pH 9.2)) to enhance the separation of the phenolic isomers (p-benzenediol, m-benzenediol, o-benzenediol, m-nitrophenol, p-nitrophenol, and o-nitrophenol). ZIF-8 nanocrystals in the running buffer were negatively charged, and interacted with the phenolic hydroxyl groups of the analytes, and thus greatly improved the separation of the phenolic isomers. Inclusion of 200 mg L-(1) ZIF-8 in the running buffer as the background electrolyte gave a baseline separation of the phenolic isomers within 4 min. The relative standard deviations for five replicate separations of the phenolic isomers were 0.2-1.1% for migration time and 4.5-9.7% for peak area. The limits of detection varied from 0.44 to 2.0 mg L-(1) . The results show that nanosized MOFs are promising for application in EKC.

  18. A molecular shuttle that operates inside a metal-organic framework.

    PubMed

    Zhu, Kelong; O'Keefe, Christopher A; Vukotic, V Nicholas; Schurko, Robert W; Loeb, Stephen J

    2015-06-01

    A 'molecular shuttle' is an interlocked molecular assembly in which a macrocyclic ring is able to move back and forth between two recognition sites. This large-amplitude translational motion was first characterized in solution in 1991. Since that report, many mechanically interlocked molecules (MIMs) have been designed, synthesized and shown to mimic the complex functions of macroscopic switches and machines. Here, we show that this fundamental concept-the translational motion of a molecular shuttle-can be organized, initiated and made to operate inside a crystalline, solid-state material. A metal-organic framework (MOF) designated UWDM-4 was prepared that contains a rigid linker that is a molecular shuttle. It was demonstrated by variable-temperature (1)H-(13)C cross-polarization/magic-angle spinning (CP/MAS) and (13)C 2D exchange correlation spectroscopy (EXSY) solid-state NMR at 21.1 T on a (13)C-enriched sample that the macrocyclic ring undergoes rapid shuttling along the rigid axle built between struts of the framework.

  19. Superior removal of arsenic from water with zirconium metal-organic framework UiO-66.

    PubMed

    Wang, Chenghong; Liu, Xinlei; Chen, J Paul; Li, Kang

    2015-11-12

    In this study, water stable zirconium metal-organic framework (UiO-66) has been synthesized and for the first time applied as an adsorbent to remove aquatic arsenic contamination. The as-synthesized UiO-66 adsorbent functions excellently across a broad pH range of 1 to 10, and achieves a remarkable arsenate uptake capacity of 303 mg/g at the optimal pH, i.e., pH = 2. To the best of our knowledge, this is the highest arsenate As(V) adsorption capacity ever reported, much higher than that of currently available adsorbents (5-280 mg/g, generally less than 100 mg/g). The superior arsenic uptake performance of UiO-66 adsorbent could be attributed to the highly porous crystalline structure containing zirconium oxide clusters, which provides a large contact area and plenty of active sites in unit space. Two binding sites within the adsorbent framework are proposed for arsenic species, i.e., hydroxyl group and benzenedicarboxylate ligand. At equilibrium, seven equivalent arsenic species can be captured by one Zr6 cluster through the formation of Zr-O-As coordination bonds.

  20. Molecular separations with breathing metal-organic frameworks: modelling packed bed adsorbers.

    PubMed

    Van Assche, Tom R C; Baron, Gino V; Denayer, Joeri F M

    2016-03-14

    Various metal-organic framework (MOFs) adsorbents show peculiar adsorption behaviour as they can adopt different crystal phases, each phase with its own adsorption characteristics. Besides external stimuli such as temperature or light, different species of guest adsorbate can trigger a transition (breathing) of the host structure at a different pressure. Such phase transitions also occur during dynamic separations on a packed bed of adsorbent, where the concentrations of the adsorbates vary throughout axial column distance and time. This work presents a general strategy to model the adsorption behavior of such phase changing adsorbents during column separations and focuses on remarkable model predictions for pure components and binary mixtures in diluted and non-diluted conditions. During binary breakthrough experiments, the behaviour of flexible adsorbents is quite complex. A succession of complete or even partial phase transformations (resulting in phase coexistence) can occur during the adsorption process. A variety of unusual breakthrough profiles is observed for diluted binary mixtures. Simulations reveal at least five types of breakthrough profiles to emerge. The occurrence of these cases can be rationalized by the hodograph technique, combined with the phase diagram of the adsorbent. The remarkable experimental breakthrough profiles observed for ortho-xylene/ethylbenzene (diluted) and CO2/CH4 (non-diluted) separation on the flexible MIL-53 framework can be rationalized by application of the proposed model strategy.

  1. Bimetallic Metal-Organic Frameworks: Probing the Lewis Acid Site for CO2 Conversion.

    PubMed

    Zou, Ruyi; Li, Pei-Zhou; Zeng, Yong-Fei; Liu, Jia; Zhao, Ruo; Duan, Hui; Luo, Zhong; Wang, Jin-Gui; Zou, Ruqiang; Zhao, Yanli

    2016-05-01

    A highly porous metal-organic framework (MOF) incorporating two kinds of second building units (SBUs), i.e., dimeric paddlewheel (Zn2 (COO)4 ) and tetrameric (Zn4 (O)(CO2 )6 ), is successfully assembled by the reaction of a tricarboxylate ligand with Zn(II) ion. Subsequently, single-crystal-to-single-crystal metal cation exchange using the constructed MOF is investigated, and the results show that Cu(II) and Co(II) ions can selectively be introduced into the MOF without compromising the crystallinity of the pristine framework. This metal cation-exchangeable MOF provides a useful platform for studying the metal effect on both gas adsorption and catalytic activity of the resulted MOFs. While the gas adsorption experiments reveal that Cu(II) and Co(II) exchanged samples exhibit comparable CO2 adsorption capability to the pristine Zn(II) -based MOF under the same conditions, catalytic investigations for the cycloaddition reaction of CO2 with epoxides into related carbonates demonstrate that Zn(II) -based MOF affords the highest catalytic activity as compared with Cu(II) and Co(II) exchanged ones. Molecular dynamic simulations are carried out to further confirm the catalytic performance of these constructed MOFs on chemical fixation of CO2 to carbonates. This research sheds light on how metal exchange can influence intrinsic properties of MOFs.

  2. Selective, Tunable O2 Binding in Cobalt(II)-Triazolate/Pyrazolate Metal-Organic Frameworks.

    PubMed

    Xiao, Dianne J; Gonzalez, Miguel I; Darago, Lucy E; Vogiatzis, Konstantinos D; Haldoupis, Emmanuel; Gagliardi, Laura; Long, Jeffrey R

    2016-06-08

    The air-free reaction of CoCl2 with 1,3,5-tri(1H-1,2,3-triazol-5-yl)benzene (H3BTTri) in N,N-dimethylformamide (DMF) and methanol leads to the formation of Co-BTTri (Co3[(Co4Cl)3(BTTri)8]2·DMF), a sodalite-type metal-organic framework. Desolvation of this material generates coordinatively unsaturated low-spin cobalt(II) centers that exhibit a strong preference for binding O2 over N2, with isosteric heats of adsorption (Qst) of -34(1) and -12(1) kJ/mol, respectively. The low-spin (S = 1/2) electronic configuration of the metal centers in the desolvated framework is supported by structural, magnetic susceptibility, and computational studies. A single-crystal X-ray structure determination reveals that O2 binds end-on to each framework cobalt center in a 1:1 ratio with a Co-O2 bond distance of 1.973(6) Å. Replacement of one of the triazolate linkers with a more electron-donating pyrazolate group leads to the isostructural framework Co-BDTriP (Co3[(Co4Cl)3(BDTriP)8]2·DMF; H3BDTriP = 5,5'-(5-(1H-pyrazol-4-yl)-1,3-phenylene)bis(1H-1,2,3-triazole)), which demonstrates markedly higher yet still fully reversible O2 affinities (Qst = -47(1) kJ/mol at low loadings). Electronic structure calculations suggest that the O2 adducts in Co-BTTri are best described as cobalt(II)-dioxygen species with partial electron transfer, while the stronger binding sites in Co-BDTriP form cobalt(III)-superoxo moieties. The stability, selectivity, and high O2 adsorption capacity of these materials render them promising new adsorbents for air separation processes.

  3. Structural, luminescent, and magnetic properties of three novel three-dimensional metal-organic frameworks based on hexadentate N,N'-bis(4-picolinoyl)hydrazine.

    PubMed

    Fang, Zhen-Lan; Yu, Rong-Min; He, Jian-Gang; Zhang, Qi-Sheng; Zhao, Zhen-Guo; Lu, Can-Zhong

    2009-08-17

    Three novel microporous three-dimensional (3-D) metal-organic framework materials [ML](n) [M = Ni, Co, Cd; L = N,N'-bis(4-picolinoyl)hydrazine] were obtained from hydrothermal reactions. The organic ligand L was formed through the in situ ring-opening hydrolysis reaction of 2,5-bis(4-pyridyl)-1,3,4-oxadiazole with the assistance of metal ions. Single-crystal X-ray diffraction studies reveal that complexes 1-3 adopt 6-connected 3-D networks of distorted alpha-Po topology, which are built from non-interpenetrated (4,4) grids cross-linked by zigzag chains. These isomorphic complexes are all of high thermal stability, but some other physical properties are quite different because of their different metal centers. Antiferromagnetic exchange was observed between Ni(II) centers of complex 1, while ferromagnetic for Co(II) centers of complex 2. Complex 3 exhibits strong fluorescence emission.

  4. Assembly of a Metal-Organic Framework into 3 D Hierarchical Porous Monoliths Using a Pickering High Internal Phase Emulsion Template.

    PubMed

    Zhu, He; Zhang, Qi; Zhu, Shiping

    2016-06-20

    3D Hierarchical porous metal-organic framework (MOF) monoliths are prepared by using Pickering high internal phase emulsion (HIPE) template. Pickering HIPEs were stabilized solely by UiO-66 MOF particles with internal phase up to 90 % of the volume. The effects of internal phase type and volume, as well as MOF particle concentration on the stability of resulting Pickering HIPEs were investigated. Furthermore, by adding small amount of polyvinyl alcohol (PVA) as binder or polymerization in the continuous aqueous phase, followed by freeze-drying, two types of MOF-based 3D hierarchical porous monoliths with ultralow density (as low as 12 mg cm(-3) ) were successfully prepared. This Pickering HIPE template approach provides a facile and practical way for assembling of MOFs into complex structures.

  5. A Highly Energetic N-Rich Zeolite-Like Metal-Organic Framework with Excellent Air Stability and Insensitivity.

    PubMed

    Qin, Jun-Sheng; Zhang, Ji-Chuan; Zhang, Min; Du, Dong-Ying; Li, Jing; Su, Zhong-Min; Wang, Yuan-Yuan; Pang, Si-Ping; Li, Sheng-Hua; Lan, Ya-Qian

    2015-12-01

    A stable N-rich aromatic ligand is employed to prepare energetic zeolite-like metal-organic frameworks. IFMC-1 shows excellent air stability, and the lowest sensitivity toward impact, friction, and electrostatic discharge and the highest predicted heat of detonation among the reported coordination polymers, and even commercial materials (such as trinitrotoluene (TNT)).

  6. Enzyme Immobilized on Nanoporous Carbon Derived from Metal-Organic Framework: A New Support for Biodiesel Synthesis.

    PubMed

    Liu, Li-Hao; Shih, Yung-Han; Liu, Wan-Ling; Lin, Chia-Her; Huang, Hsi-Ya

    2017-04-10

    In this study, nanoporous carbon (NPC) derived from metal-organic framework was used as support for the immobilization of Burkholderia cepacia lipase. The decorated aluminum oxide within the mesoporous NPC improved the enzyme loading efficiency as well as the catalytic ability for the transesterification of soybean oil, thus making it a promising green and sustainable catalytic system for industrial application.

  7. Counter-cation modulation of hydrogen and methane storage in a sodalite-type porous metal-organic framework.

    PubMed

    Gong, Yun-Nan; Meng, Miao; Zhong, Di-Chang; Huang, Yong-Liang; Jiang, Long; Lu, Tong-Bu

    2012-12-21

    A μ(4)-Cl bridged anionic sodalite-type porous metal-organic framework (Et(2)NH(2))(3)[(Cu(4)Cl)(3)(TTCA)(8)]·26DEF was synthesized, in which Et(2)NH(2)(+) can be exchanged by Li(+) cations. The results of gas measurements indicate that Et(2)NH(2)(+) and Li(+) are beneficial for methane and hydrogen storage, respectively.

  8. Defect-Controlled Preparation of UiO-66 Metal-Organic Framework Thin Films with Molecular Sieving Capability.

    PubMed

    Zhang, Caiqin; Zhao, Yajing; Li, Yali; Zhang, Xuetong; Chi, Lifeng; Lu, Guang

    2016-01-01

    Metal-organic framework (MOF) UiO-66 thin films are solvothermally grown on conducting substrates. The as-synthesized MOF thin films are subsequently dried by a supercritical process or treated with polydimethylsiloxane (PDMS). The obtained UiO-66 thin films show excellent molecular sieving capability as confirmed by the electrochemical studies for redox-active species with different sizes.

  9. Planar Mn4O cluster homochiral metal-organic framework for HPLC separation of pharmaceutically important (±)-ibuprofen racemate.

    PubMed

    Hailili, Reshalaiti; Wang, Li; Qv, Junzhang; Yao, Ruxin; Zhang, Xian-Ming; Liu, Huwei

    2015-04-20

    A planar tetracoordinated oxygen containing a homochiral metal-organic framework (MOF) has been synthesized and characterized that can be used as a new chiral stationary phase in high-performance liquid chromatography to efficiently separate racemates such as pharmaceutically important (±)-ibuprofen and (±)-1-phenyl-1,2-ethanediol.

  10. Fast detection of oxygen by the naked eye using a stable metal-organic framework containing methyl viologen cations.

    PubMed

    Gong, Yun-Nan; Lu, Tong-Bu

    2013-09-11

    A stable porous metal-organic framework (MOF) containing methyl viologen cations exhibits reversible photochromic, thermochromic and fluorescence changes via host-guest interactions, and can be used for fast and selective detection of oxygen by naked eye recognition of color change within five seconds.

  11. A facilely synthesized amino-functionalized metal-organic framework for highly specific and efficient enrichment of glycopeptides.

    PubMed

    Zhang, Yi-Wei; Li, Ze; Zhao, Qiang; Zhou, Ying-Lin; Liu, Hu-Wei; Zhang, Xin-Xiang

    2014-10-09

    A facilely synthesized amino-functionalized metal-organic framework (MOF) MIL-101(Cr)-NH2 was first applied for highly specific glycopeptide enrichment based on the hydrophilic interactions. With the special characteristics of the MOF, the material performed well in selectivity and sensitivity for both standard glycoprotein samples and complex biological samples.

  12. Facile xenon capture and release at room temperature using a metal-organic framework: a comparison with activated charcoal

    SciTech Connect

    Thallapally, Praveen K.; Grate, Jay W.; Motkuri, Radha K.

    2012-01-11

    Two well known Metal organic frameworks (MOF-5, NiDOBDC) were synthesized and studied for facile xenon capture and separation. Our results indicate the NiDOBDC adsorbs significantly more xenon than MOF-5, releases it more readily than activated carbon, and is more selective for Xe over Kr than activated carbon.

  13. Preparation, Characterization, and Postsynthetic Modification of Metal-Organic Frameworks: Synthetic Experiments for an Undergraduate Laboratory Course in Inorganic Chemistry

    ERIC Educational Resources Information Center

    Sumida, Kenji; Arnold, John

    2011-01-01

    Metal-organic frameworks (MOFs) are crystalline materials that are composed of an infinite array of metal nodes (single ions or clusters) linked to one another by polyfunctional organic compounds. Because of their extraordinary surface areas and high degree of control over the physical and chemical properties, these materials have received much…

  14. The first metal-organic framework containing an unprecedented in situ-generated C-substituted hexamethylenetetramine ligand.

    PubMed

    Deng, Zhao-Peng; Huo, Li-Hua; Xu, Hui; Zhao, Hui; Ng, Seik Weng; Gao, Shan

    2011-02-14

    The first metal-organic framework containing an unprecedented in situ-generated C-substituted hexamethylenetetramine ligand has been successfully prepared by the reaction of silver nitrate, 4-formylbenzoic acid and hexamethylenetetramine under traditional solution conditions, which holds the unusual (3,4)-connected topological network.

  15. A novel core-shell molecularly imprinted polymer based on metal-organic frameworks as a matrix.

    PubMed

    Qian, Kun; Fang, Guozhen; Wang, Shuo

    2011-09-28

    A novel core-shell molecularly imprinted polymer is firstly prepared by coating the MIP shell onto the surface of the metal-organic framework, which shows a homogeneous polymer film, cubic shape, thermal stability, and exhibits a higher specific surface area and a faster transfer-mass speed compared with that of the bulk MIP.

  16. Ab initio investigation on hydrogen adsorption capability in Zn and Cu-based metal organic frameworks

    NASA Astrophysics Data System (ADS)

    Tanuwijaya, V. V.; Hidayat, N. N.; Agusta, M. K.; Dipojono, H. K.

    2015-09-01

    One of the biggest challenge in material technology for hydrogen storage application is to increase hydrogen uptake in room temperature and pressure. As a class of highly porous material, Metal-Organic Frameworks (MOF) holds great potential with its tunable structure. However, little is known about the effect of metal cluster to its hydrogen storage capability. Investigation on this matter has been carried out carefully on small cluster of Zn and Cu-based MOF using first principles method. The calculation of two distinct building units of MOFs, namely octahedral and paddle-wheel models, have been done with B3LYP density functional method using 6-31G(d,p) and LANL2DZ basis sets. From geometry optimization of Zn-based MOF linked by benzene-dicarboxylate (MOF-5), it is found that hydrogen tends to keep distance from metal cluster group and stays above benzene ring. In the other hand, hydrogen molecule prefers to stay atop of the exposed Cu atom in Cu-based MOF system linked by the same linker group (Cu-bdc). Calculated hydrogen binding enthalpies for Zn and Cu octahedral cages at ZnO3 sites are 1.64kJ/mol and 2.73kJ/mol respectively, while hydrogen binding enthalpies for Zn and Cu paddle-wheel cages calculated on top of metal atoms are found to be at 6.05kJ/mol and 6.10kJ/mol respectively. Major difference between Zn-MOF-5 and Cu-bdc hydrogen uptake performance might be caused by unsaturated metal sites present in Cu-bdc system and the influence of their geometric structures, although a small difference on binding energy in the type of transition metal used is also observed. The comparison between Zn and Cu-based MOF may contribute to a comprehensive understanding of metal clusters and the importance of selecting best transition metal for design and synthesis of metal-organic frameworks.

  17. Hollow silica-copper-carbon anodes using copper metal-organic frameworks as skeletons

    NASA Astrophysics Data System (ADS)

    Sun, Zixu; Xin, Fengxia; Cao, Can; Zhao, Chongchong; Shen, Cai; Han, Wei-Qiang

    2015-12-01

    Hollow silica-copper-carbon (H-SCC) nanocomposites are first synthesized using copper metal-organic frameworks as skeletons to form Cu-MOF@SiO2 and then subjected to heat treatment. In the composites, the hollow structure and the void space from the collapse of the MOF skeleton can accommodate the huge volume change, buffer the mechanical stress caused by lithium ion insertion/extraction and maintain the structural integrity of the electrode and a long cycling stability. The ultrafine copper with a uniform size of around 5 nm and carbon with homogeneous distribution from the decomposition of the MOF skeleton can not only enhance the electrical conductivity of the composite and preserve the structural and interfacial stabilization, but also suppress the aggregation of silica nanoparticles and cushion the volume change. In consequence, the resulting material as an anode for lithium-ion batteries (LIBs) delivers a reversible capacity of 495 mA h g-1 after 400 cycles at a current density of 500 mA g-1. The synthetic method presented in this paper provides a facile and low-cost strategy for the large-scale production of hollow silica/copper/carbon nanocomposites as an anode in LIBs.Hollow silica-copper-carbon (H-SCC) nanocomposites are first synthesized using copper metal-organic frameworks as skeletons to form Cu-MOF@SiO2 and then subjected to heat treatment. In the composites, the hollow structure and the void space from the collapse of the MOF skeleton can accommodate the huge volume change, buffer the mechanical stress caused by lithium ion insertion/extraction and maintain the structural integrity of the electrode and a long cycling stability. The ultrafine copper with a uniform size of around 5 nm and carbon with homogeneous distribution from the decomposition of the MOF skeleton can not only enhance the electrical conductivity of the composite and preserve the structural and interfacial stabilization, but also suppress the aggregation of silica nanoparticles and

  18. Ab initio investigation on hydrogen adsorption capability in Zn and Cu-based metal organic frameworks

    SciTech Connect

    Tanuwijaya, V. V.; Hidayat, N. N. Agusta, M. K. Dipojono, H. K.

    2015-09-30

    One of the biggest challenge in material technology for hydrogen storage application is to increase hydrogen uptake in room temperature and pressure. As a class of highly porous material, Metal-Organic Frameworks (MOF) holds great potential with its tunable structure. However, little is known about the effect of metal cluster to its hydrogen storage capability. Investigation on this matter has been carried out carefully on small cluster of Zn and Cu-based MOF using first principles method. The calculation of two distinct building units of MOFs, namely octahedral and paddle-wheel models, have been done with B3LYP density functional method using 6-31G(d,p) and LANL2DZ basis sets. From geometry optimization of Zn-based MOF linked by benzene-dicarboxylate (MOF-5), it is found that hydrogen tends to keep distance from metal cluster group and stays above benzene ring. In the other hand, hydrogen molecule prefers to stay atop of the exposed Cu atom in Cu-based MOF system linked by the same linker group (Cu-bdc). Calculated hydrogen binding enthalpies for Zn and Cu octahedral cages at ZnO{sub 3} sites are 1.64kJ/mol and 2.73kJ/mol respectively, while hydrogen binding enthalpies for Zn and Cu paddle-wheel cages calculated on top of metal atoms are found to be at 6.05kJ/mol and 6.10kJ/mol respectively. Major difference between Zn-MOF-5 and Cu-bdc hydrogen uptake performance might be caused by unsaturated metal sites present in Cu-bdc system and the influence of their geometric structures, although a small difference on binding energy in the type of transition metal used is also observed. The comparison between Zn and Cu-based MOF may contribute to a comprehensive understanding of metal clusters and the importance of selecting best transition metal for design and synthesis of metal-organic frameworks.

  19. Using functional nano- and microparticles for the preparation of metal-organic framework composites with novel properties.

    PubMed

    Doherty, Cara M; Buso, Dario; Hill, Anita J; Furukawa, Shuhei; Kitagawa, Susumu; Falcaro, Paolo

    2014-02-18

    A critical materials challenge over the next quarter century is the sustainable use and management of the world's natural resources, particularly the scarcest of them. Chemistry's ability to get more from less is epitomized by porous coordination polymers, also known as metal-organic frameworks (MOFs), which use a minimum amount of material to build maximum surface areas with fine control over pore size. Their large specific surface area and tunable porosity make MOFs useful for applications including small-molecule sensing, separation, catalysis, and storage and release of molecules of interest. Proof-of-concept projects have demonstrated their potential for environmental applications such as carbon separation and capture, water purification, carcinogen sequestration, byproduct separation, and resource recovery. To translate these from the laboratory into devices for actual use, however, will require synthesis of MOFs with new functionality and structure. This Account summarizes recent progress in the use of nano- and microparticles to control the function, location, and 3D structure of MOFs during MOF self-assembly, creating novel, hybrid, multifunctional, ultraporous materials as a first step towards creating MOF-based devices. The use of preformed ceramic, metallic, semiconductive, or polymeric particles allows the particle preparation process to be completely independent of the MOF synthesis, incorporating nucleating, luminescent, magnetic, catalytic, or templating particles into the MOF structure. We discuss success in combining functional nanoparticles and porous crystals for applications including molecular sieve detectors, repositionable and highly sensitive sensors, pollutant-sequestering materials, microfluidic microcarriers, drug-delivery materials, separators, and size-selective catalysts. In sections within the Account, we describe how functional particles can be used for (1) heterogeneous nucleation (seeding) of MOFs, (2) preparation of framework

  20. Cooperative Assembly of 3-Ring-Based Zeolite-Type Metal-Organic Frameworks and Johnson-Type Dodecahedra

    PubMed Central

    Zheng, Shou-Tian; Zuo, Fan; Wu, Tao; Irfanoglu, Burcin; Chou, Chengtsung; Nieto, Ruben A.; Feng, Pingyun

    2015-01-01

    Two birds with one stone One synthetic strategy led to the preparation of both 3-ring-based zeolite-type metal-organic frameworks (NPO-type) and Johnson-type metal-organic polyhedra. The strategy is based on the cooperative assembly of 4-connected indium nodes with two symmetry-complementary ligands (one serves to generate 3-rings and the other crosslinks 3-rings). Photocatalytic H2 production experiments demonstrated these NPO-zeolite compounds behave as semiconductors and exhibit photocatalytic activity for the generation of dihydrogen from water under ultraviolet irradiation. PMID:21328654

  1. Metal-organic and zeolite imidazolate frameworks (MOFs and ZIFs) for highly selective separations

    SciTech Connect

    Yaghi, Omar M

    2012-09-17

    Metal-organic and zeolite imidazolate frameworks (MOFs and ZIFs) have been investigated for the realization as separation media with high selectivity. These structures are held together with strong bonds, making them architecturally, chemically, and thermally stable. Therefore, employing well designed building units, it is possible to discover promising materials for gas and vapor separation. This grant was focused on the study of MOFs and ZIFs with these specific objectives: (i) to develop a strategy for producing MOFs and ZIFs that combine high surface areas with active sites for their use in gas adsorption and separation of small organic compounds, (ii) to introduce active sites in the framework by a post-synthetic modification and metalation of MOFs and ZIFs, and (iii) to design and synthesize MOFs with extremely high surface areas and large pore volumes to accommodate large amounts of guest molecules. By the systematic study, this effort demonstrated how to introduce active functional groups in the frameworks, and this is also the origin of a new strategy, which is termed isoreticular functionalization and metalation. However, a large pore volume is still a prerequisite feature. One of the solutions to overcome this challenge is an isoreticular expansion of a MOF's structure. With triangular organic linker and square building units, we demonstrated that MOF-399 has a unit cell volume 17 times larger than that of the first reported material isoreticular to it, and it has the highest porosity (94%) and lowest density (0.126 g cm-3) of any MOF reported to date. MOFs are not just low density materials; the guest-free form of MOF-210 demonstrates an ultrahigh porosity, whose BET surface area was estimated to be 6240 m2 g-1 by N2 adsorption measurements.

  2. Direct measurement of adsorbed gas redistribution in metal-organic frameworks.

    PubMed

    Chen, Ying-Pin; Liu, Yangyang; Liu, Dahuan; Bosch, Mathieu; Zhou, Hong-Cai

    2015-03-04

    Knowledge about the interactions between gas molecules and adsorption sites is essential to customize metal-organic frameworks (MOFs) as adsorbents. The dynamic interactions occurring during adsorption/desorption working cycles with several states are especially complicated. Even so, the gas dynamics based upon experimental observations and the distribution of guest molecules under various conditions in MOFs have not been extensively studied yet. In this work, a direct time-resolved diffraction structure envelope (TRDSE) method using sequential measurements by in situ synchrotron powder X-ray diffraction has been developed to monitor several gas dynamic processes taking place in MOFs: infusion, desorption, and gas redistribution upon temperature change. The electron density maps indicate that gas molecules prefer to redistribute over heterogeneous types of sites rather than to exclusively occupy the primary binding sites. We found that the gas molecules are entropically driven from open metal sites to larger neighboring spaces during the gas infusion period, matching the localized-to-mobile mechanism. In addition, the partitioning ratio of molecules adsorbed at each site varies with different temperatures, as opposed to an invariant distribution mode. Equally important, the gas adsorption in MOFs is intensely influenced by the gas-gas interactions, which might induce more molecules to be accommodated in an orderly compact arrangement. This sequential TRDSE method is generally applicable to most crystalline adsorbents, yielding information on distribution ratios of adsorbates at each type of site.

  3. Modulating supramolecular binding of carbon dioxide in a redox-active porous metal-organic framework

    NASA Astrophysics Data System (ADS)

    Lu, Zhenzhong; Godfrey, Harry G. W.; da Silva, Ivan; Cheng, Yongqiang; Savage, Mathew; Tuna, Floriana; McInnes, Eric J. L.; Teat, Simon J.; Gagnon, Kevin J.; Frogley, Mark D.; Manuel, Pascal; Rudić, Svemir; Ramirez-Cuesta, Anibal J.; Easun, Timothy L.; Yang, Sihai; Schröder, Martin

    2017-02-01

    Hydrogen bonds dominate many chemical and biological processes, and chemical modification enables control and modulation of host-guest systems. Here we report a targeted modification of hydrogen bonding and its effect on guest binding in redox-active materials. MFM-300(VIII) {[VIII2(OH)2(L)], LH4=biphenyl-3,3',5,5'-tetracarboxylic acid} can be oxidized to isostructural MFM-300(VIV), [VIV2O2(L)], in which deprotonation of the bridging hydroxyl groups occurs. MFM-300(VIII) shows the second highest CO2 uptake capacity in metal-organic framework materials at 298 K and 1 bar (6.0 mmol g-1) and involves hydrogen bonding between the OH group of the host and the O-donor of CO2, which binds in an end-on manner, =1.863(1) Å. In contrast, CO2-loaded MFM-300(VIV) shows CO2 bound side-on to the oxy group and sandwiched between two phenyl groups involving a unique ...c.g.phenyl interaction [3.069(2), 3.146(3) Å]. The macroscopic packing of CO2 in the pores is directly influenced by these primary binding sites.

  4. Enhanced photochemical hydrogen production by a molecular diiron catalyst incorporated into a metal-organic framework.

    PubMed

    Pullen, Sonja; Fei, Honghan; Orthaber, Andreas; Cohen, Seth M; Ott, Sascha

    2013-11-13

    A molecular proton reduction catalyst [FeFe](dcbdt)(CO)6 (1, dcbdt = 1,4-dicarboxylbenzene-2,3-dithiolate) with structural similarities to [FeFe]-hydrogenase active sites has been incorporated into a highly robust Zr(IV)-based metal-organic framework (MOF) by postsynthetic exchange (PSE). The PSE protocol is crucial as direct solvothermal synthesis fails to produce the functionalized MOF. The molecular integrity of the organometallic site within the MOF is demonstrated by a variety of techniques, including X-ray absorption spectroscopy. In conjunction with [Ru(bpy)3](2+) as a photosensitizer and ascorbate as an electron donor, MOF-[FeFe](dcbdt)(CO)6 catalyzes photochemical hydrogen evolution in water at pH 5. The immobilized catalyst shows substantially improved initial rates and overall hydrogen production when compared to a reference system of complex 1 in solution. Improved catalytic performance is ascribed to structural stabilization of the complex when incorporated in the MOF as well as the protection of reduced catalysts 1(-) and 1(2-) from undesirable charge recombination with oxidized ascorbate.

  5. Modulating supramolecular binding of carbon dioxide in a redox-active porous metal-organic framework.

    PubMed

    Lu, Zhenzhong; Godfrey, Harry G W; da Silva, Ivan; Cheng, Yongqiang; Savage, Mathew; Tuna, Floriana; McInnes, Eric J L; Teat, Simon J; Gagnon, Kevin J; Frogley, Mark D; Manuel, Pascal; Rudić, Svemir; Ramirez-Cuesta, Anibal J; Easun, Timothy L; Yang, Sihai; Schröder, Martin

    2017-02-13

    Hydrogen bonds dominate many chemical and biological processes, and chemical modification enables control and modulation of host-guest systems. Here we report a targeted modification of hydrogen bonding and its effect on guest binding in redox-active materials. MFM-300(V(III)) {[V(III)2(OH)2(L)], LH4=biphenyl-3,3',5,5'-tetracarboxylic acid} can be oxidized to isostructural MFM-300(V(IV)), [V(IV)2O2(L)], in which deprotonation of the bridging hydroxyl groups occurs. MFM-300(V(III)) shows the second highest CO2 uptake capacity in metal-organic framework materials at 298 K and 1 bar (6.0 mmol g(-1)) and involves hydrogen bonding between the OH group of the host and the O-donor of CO2, which binds in an end-on manner, =1.863(1) Å. In contrast, CO2-loaded MFM-300(V(IV)) shows CO2 bound side-on to the oxy group and sandwiched between two phenyl groups involving a unique ···c.g.phenyl interaction [3.069(2), 3.146(3) Å]. The macroscopic packing of CO2 in the pores is directly influenced by these primary binding sites.

  6. Smart Nanocomposites of Cu-Hemin Metal-Organic Frameworks for Electrochemical Glucose Biosensing

    PubMed Central

    He, Juan; Yang, Han; Zhang, Yayun; Yu, Jie; Miao, Longfei; Song, Yonghai; Wang, Li

    2016-01-01

    Herein, a smart porous material, Cu-hemin metal-organic-frameworks (Cu-hemin MOFs), was synthesized via assembling of Cu2+ with hemin to load glucose oxidase (GOD) for electrochemical glucose biosensing for the first time. The formation of the Cu-hemin MOFs was verified by scanning electron microscopy, X-ray powder diffraction, Fourier transform infrared spectroscopy, N2 adsorption/desorption isotherms, UV-vis absorption spectroscopy, fluorescence spectroscopy, thermal analysis and electrochemical techniques. The results indicated that the Cu-hemin MOFs showed a ball-flower-like hollow cage structure with a large specific surface area and a large number of mesopores. A large number of GOD molecules could be successfully loaded in the pores of Cu-hemin MOFs to keep their bioactivity just like in a solution. The GOD/Cu-hemin MOFs exhibited both good performance toward oxygen reduction reaction via Cu-hemin MOFs and catalytic oxidation of glucose via GOD, superior to other GOD/MOFs and GOD/nanomaterials. Accordingly, the performance of GOD/Cu-hemin MOFs-based electrochemical glucose sensor was enhanced greatly, showing a wide linear range from 9.10 μM to 36.0 mM and a low detection limit of 2.73 μM. Moreover, the sensor showed satisfactory results in detection of glucose in human serum. This work provides a practical design of new electrochemical sensing platform based on MOFs and biomolecules. PMID:27811998

  7. Parts per Million Detection of Alcohol Vapors via Metal Organic Framework Functionalized Surface Plasmon Resonance Sensors.

    PubMed

    Vandezande, Wouter; Janssen, Kris P F; Delport, Filip; Ameloot, Rob; De Vos, Dirk E; Lammertyn, Jeroen; Roeffaers, Maarten B J

    2017-03-30

    The development of novel molecular sieves opens opportunities in the development of more sensitive analytical devices. In this paper, metal organic frameworks (MOFs), specifically ZIF-8 and ZIF-93, are grown on fiber optic based surface plasmon resonance (FO-SPR) sensors. FO-SPR has enabled sensitive sensing capabilities in biomedical settings and the addition of an MOF coating opens the way for the sensing of volatile organic compounds (VOCs) in gaseous media. FO-SPR probes were homogeneously functionalized with ZIF-8 and ZIF-93 in each case using two different precursor solutions to obtain a sequential nucleation and growth phase. The difference in MOF nucleation and growth kinetics of the two solutions was directly monitored by the FO-SPR system. The two established MOF-FO-SPR sensors were then subjected to sensing experiments with several alcohol vapors to establish their sensing capabilities. Vapors with mPa partial pressures, ppm concentrations, could successfully be detected, e.g., an LOD of 2.5 ppm for methanol detection was acquired. The difference in recognition behavior of the hydrophobic ZIF-8 and more hydrophilic ZIF-93 recognition layers can be exploited to yield qualitative information regarding the vapor composition.

  8. Hydrogen adsorption in metal-organic frameworks: the role of nuclear quantum effects.

    PubMed

    Wahiduzzaman, Mohammad; Walther, Christian F J; Heine, Thomas

    2014-08-14

    The role of nuclear quantum effects on the adsorption of molecular hydrogen in metal-organic frameworks (MOFs) has been investigated on grounds of Grand-Canonical Quantized Liquid Density-Functional Theory (GC-QLDFT) calculations. For this purpose, we have carefully validated classical H2-host interaction potentials that are obtained by fitting Born-Oppenheimer ab initio reference data. The hydrogen adsorption has first been assessed classically using Liquid Density-Functional Theory and the Grand-Canonical Monte Carlo methods. The results have been compared against the semi-classical treatment of quantum effects by applying the Feynman-Hibbs correction to the Born-Oppenheimer-derived potentials, and by explicit treatment within the GC-QLDFT. The results are compared with experimental data and indicate pronounced quantum and possibly many-particle effects. After validation calculations have been carried out for IRMOF-1 (MOF-5), GC-QLDFT is applied to study the adsorption of H2 in a series of MOFs, including IRMOF-4, -6, -8, -9, -10, -12, -14, -16, -18, and MOF-177. Finally, we discuss the evolution of the H2 quantum fluid with increasing pressure and lowering temperature.

  9. Metal-organic frameworks supported surface-imprinted nanoparticles for the sensitive detection of metolcarb.

    PubMed

    Qian, Kun; Deng, Qiliang; Fang, Guozhen; Wang, Junping; Pan, Mingfei; Wang, Shuo; Pu, Yuehong

    2016-05-15

    A novel approach to synthesize molecularly imprinted polymer (MIP) nanoparticles using a MIL-101 support (a type of metal-organic framework) is reported herein for the first time; the sample is referred as MIL@MIP. The nanoparticles were well distributed within the polymer film, and exhibit an octahedral shape, satisfied thermal stability, and a high specific surface area (SSA) of 1579.43 m(2)g(-1). The adsorption behavior of MIL@MIP toward metolcarb in aqueous solution was subsequently examined. The synthesized MIL@MIP displayed satisfactory high transfer mass rates and a high selective adsorption affinity for metolcarb. Based on these results, a quartz crystal microbalance (QCM) sensor based on MIL@MIP was subsequently constructed and examined for the sensitive detection of metolcarb. Under optimal conditions, the detection limit of the system assessed in pear juice was 0.0689 mg L(-1) within a linear concentration range of 0.1-0.9 mg L(-1). MIL@MIP-QCM system combines the advantages of MIL-101 and molecularly imprinted technology (MIT), thereby achieving high detection sensitivity and selectivity. The current findings suggest the potential of MIL@MIP for detecting trace level pesticides and veterinary drugs for food safety and environmental control.

  10. Design and Synthesis of Novel Porous Metal-Organic Frameworks (MOFs) Toward High Hydrogen Storage Capacity

    SciTech Connect

    Mohamed, Eddaoudi; Zaworotko, Michael; Space, Brian; Eckert, Juergen

    2013-05-08

    Statement of Objectives: 1. Synthesize viable porous MOFs for high H2 storage at ambient conditions to be assessed by measuring H2 uptake. 2. Develop a better understanding of the operative interactions of the sorbed H2 with the organic and inorganic constituents of the sorbent MOF by means of inelastic neutron scattering (INS, to characterize the H2-MOF interactions) and computational studies (to interpret the data and predict novel materials suitable for high H2 uptake at moderate temperatures and relatively low pressures). 3. Synergistically combine the outcomes of objectives 1 and 2 to construct a made-to-order inexpensive MOF that is suitable for super H2 storage and meets the DOE targets - 6% H2 per weight (2kWh/kg) by 2010 and 9% H2 per weight (3kWh/kg) by 2015. The ongoing research is a collaborative experimental and computational effort focused on assessing H2 storage and interactions with pre-selected metal-organic frameworks (MOFs) and zeolite-like MOFs (ZMOFs), with the eventual goal of synthesizing made-to-order high H2 storage materials to achieve the DOE targets for mobile applications. We proposed in this funded research to increase the amount of H2 uptake, as well as tune the interactions (i.e. isosteric heats of adsorption), by targeting readily tunable MOFs:

  11. Nanomechanical investigation of thin-film electroceramic/metal-organic framework multilayers

    SciTech Connect

    Best, James P. E-mail: engelbert.redel@kit.edu Michler, Johann; Maeder, Xavier; Liu, Jianxi; Wang, Zhengbang; Tsotsalas, Manuel; Liu, Jinxuan; Gliemann, Hartmut; Weidler, Peter G.; Redel, Engelbert E-mail: engelbert.redel@kit.edu Wöll, Christof E-mail: engelbert.redel@kit.edu; Röse, Silvana; Oberst, Vanessa; Walheim, Stefan

    2015-09-07

    Thin-film multilayer stacks of mechanically hard magnetron sputtered indium tin oxide (ITO) and mechanically soft highly porous surface anchored metal-organic framework (SURMOF) HKUST-1 were studied using nanoindentation. Crystalline, continuous, and monolithic surface anchored MOF thin films were fabricated using a liquid-phase epitaxial growth method. Control over respective fabrication processes allowed for tuning of the thickness of the thin film systems with a high degree of precision. It was found that the mechanical indentation of such thin films is significantly affected by the substrate properties; however, elastic parameters were able to be decoupled for constituent thin-film materials (E{sub ITO} ≈ 96.7 GPa, E{sub HKUST−1} ≈ 22.0 GPa). For indentation of multilayer stacks, it was found that as the layer thicknesses were increased, while holding the relative thickness of ITO and HKUST-1 constant, the resistance to deformation was significantly altered. Such an observation is likely due to small, albeit significant, changes in film texture, interfacial roughness, size effects, and controlling deformation mechanism as a result of increasing material deposition during processing. Such effects may have consequences regarding the rational mechanical design and utilization of MOF-based hybrid thin-film devices.

  12. High Methane Storage Working Capacity in Metal-Organic Frameworks with Acrylate Links.

    PubMed

    Jiang, Juncong; Furukawa, Hiroyasu; Zhang, Yue-Biao; Yaghi, Omar M

    2016-08-17

    High methane storage capacity in porous materials is important for the design and manufacture of vehicles powered by natural gas. Here, we report the synthesis, crystal structures and methane adsorption properties of five new zinc metal-organic frameworks (MOFs), MOF-905, MOF-905-Me2, MOF-905-Naph, MOF-905-NO2, and MOF-950. All these MOFs consist of the Zn4O(-CO2)6 secondary building units (SBUs) and benzene-1,3,5-tri-β-acrylate, BTAC. The permanent porosity of all five materials was confirmed, and their methane adsorption measured up to 80 bar to reveal that MOF-905 is among the best performing methane storage materials with a volumetric working capacity (desorption at 5 bar) of 203 cm(3) cm(-3) at 80 bar and 298 K, a value rivaling that of HKUST-1 (200 cm(3) cm(-3)), the benchmark compound for methane storage in MOFs. This study expands the scope of MOF materials with ultrahigh working capacity to include linkers having the common acrylate connectivity.

  13. Progress in Adsorption-Based CO2 Capture by Metal-Organic Frameworks

    SciTech Connect

    Liu, Jian; Thallapally, Praveen K.; McGrail, B. Peter; Brown, Daryl R.; Liu, Jun

    2012-01-01

    Metal-organic frameworks (MOFs) have recently attracted intense research interest because of their permanent porous structures, large surface areas, and potential applications as novel adsorbents. The recent progress in adsorption-based CO2 capture by MOFs is reviewed and summarized in this paper. CO2 adsorption in MOFs has been divided into two sections, adsorption at high pressures and selective adsorption at approximate atmospheric pressures. Keys to CO2 adsorption in MOFs at high pressures and low pressures are summarized to be pore volumes of MOFs, and heats of adsorption, respectively. Many MOFs have high CO2 selectivities over N2 and CH4. Water effects on CO2 adsorption in MOFs are presented and compared with benchmark zeolites. In addition, strategies appeared in the literature to enhance CO2 adsorption capacities and/or selectivities in MOFs have been summarized into three main categories, catenation and interpenetration, chemical bonding enhancement, and electrostatic force involvement. Besides the advantages, two main challenges for using MOFs in CO2 capture, the cost of synthesis and the stability toward water vapor, have been analyzed and possible solutions and path-forward have been proposed to address the two challenges as well.

  14. Metal-organic frameworks as biosensors for luminescence-based detection and imaging

    PubMed Central

    Miller, Sophie E.; Teplensky, Michelle H.; Moghadam, Peyman Z.; Fairen-Jimenez, David

    2016-01-01

    Metal-organic frameworks (MOFs), formed by the self-assembly of metal centres or clusters and organic linkers, possess many key structural and chemical features that have enabled them to be used in sensing platforms for a variety of environmentally, chemically and biomedically relevant compounds. In particular, their high porosity, large surface area, tuneable chemical composition, high degree of crystallinity, and potential for post-synthetic modification for molecular recognition make MOFs promising candidates for biosensing applications. In this review, we separate our discussion of MOF biosensors into two categories: quantitative sensing, focusing specifically on luminescence-based sensors for the direct measurement of a specific analyte, and qualitative sensing, where we describe MOFs used for fluorescence microscopy and as magnetic resonance imaging contrast agents. We highlight several key publications in each of these areas, concluding that MOFs present an exciting, versatile new platform for biosensing applications and imaging, and we expect to see their usage grow as the field progresses. PMID:27499847

  15. Photoreactivity of Metal-Organic Frameworks in Aqueous Solutions: Metal Dependence of Reactive Oxygen Species Production.

    PubMed

    Liu, Kai; Gao, Yanxin; Liu, Jing; Wen, Yifan; Zhao, Yingcan; Zhang, Kunyang; Yu, Gang

    2016-04-05

    Promising applications of metal-organic frameworks (MOFs) in various fields have raised concern over their environmental fate and safety upon inevitable discharge into aqueous environments. Currently, no information regarding the transformation processes of MOFs is available. Due to the presence of repetitive π-bond structure and semiconductive property, photochemical transformations are an important fate process that affects the performance of MOFs in practical applications. In the current study, the generation of reactive oxygen species (ROS) in isoreticular MIL-53s was studied. Scavengers were employed to probe the production of (1)O2, O2(•-), and •OH, respectively. In general, MIL-53(Cr) and MIL-53(Fe) are dominated by type I and II photosensitization reactions, respectively, and MIL-53(Al) appears to be less photoreactive. The generation of ROS in MIL-53(Fe) may be underestimated due to dismutation. Further investigation of MIL-53(Fe) encapsulated diclofenac transformation revealed that diclofenac can be easily transformed by MIL-53(Fe) generated ROS. However, the cytotoxicity results implied that the ROS generated from MIL-53s have little effect on the viability of the human hepatocyte (HepG2) cell line. These results suggest that the photogeneration of ROS by MOFs may be metal-node dependent, and the application of MIL-53s as drug carriers needs to be carefully considered due to their high photoreactivity.

  16. Metal-organic framework templated synthesis of ultrathin, well-aligned metallic nanowires.

    PubMed

    Volosskiy, Boris; Niwa, Kenta; Chen, Yu; Zhao, Zipeng; Weiss, Nathan O; Zhong, Xing; Ding, Mengning; Lee, Chain; Huang, Yu; Duan, Xiangfeng

    2015-03-24

    With well-defined porous structures and dimensions, metal-organic frameworks (MOFs) can function as versatile templates for the growth of metallic nanostructures with precisely controlled shapes and sizes. Using MOFs as templates, metallic nanostructures can be grown without the need of bulky surfactants and thus preserve their intrinsic surface. Additionally, the high surface area of MOFs can also ensure that the surface of the template metallic nanostructures is readily accessible, which is critical for the proper function of catalysts or sensors. The hybrid metal@MOF structures have been demonstrated to exhibit useful properties not found in either component separately. Here we report the growth of ultrafine metallic nanowires inside one-dimensional MOF pores with well-controlled shape and size. Our study shows that solvent selection plays an important role in controlling precursor loading and the reduction rate inside the MOF pores for the formation of the nanowires. The growth of the well-aligned, ultrathin nanowires was monitored and characterized by transmission electron microscopy, X-ray diffraction, UV-vis spectroscopy, fluorescence studies, and Brunauer-Emmet-Teller surface area analysis.

  17. Modulating supramolecular binding of carbon dioxide in a redox-active porous metal-organic framework

    PubMed Central

    Lu, Zhenzhong; Godfrey, Harry G. W.; da Silva, Ivan; Cheng, Yongqiang; Savage, Mathew; Tuna, Floriana; McInnes, Eric J. L.; Teat, Simon J.; Gagnon, Kevin J.; Frogley, Mark D.; Manuel, Pascal; Rudić, Svemir; Ramirez-Cuesta, Anibal J.; Easun, Timothy L.; Yang, Sihai; Schröder, Martin

    2017-01-01

    Hydrogen bonds dominate many chemical and biological processes, and chemical modification enables control and modulation of host–guest systems. Here we report a targeted modification of hydrogen bonding and its effect on guest binding in redox-active materials. MFM-300(VIII) {[VIII2(OH)2(L)], LH4=biphenyl-3,3′,5,5′-tetracarboxylic acid} can be oxidized to isostructural MFM-300(VIV), [VIV2O2(L)], in which deprotonation of the bridging hydroxyl groups occurs. MFM-300(VIII) shows the second highest CO2 uptake capacity in metal-organic framework materials at 298 K and 1 bar (6.0 mmol g−1) and involves hydrogen bonding between the OH group of the host and the O-donor of CO2, which binds in an end-on manner, =1.863(1) Å. In contrast, CO2-loaded MFM-300(VIV) shows CO2 bound side-on to the oxy group and sandwiched between two phenyl groups involving a unique ···c.g.phenyl interaction [3.069(2), 3.146(3) Å]. The macroscopic packing of CO2 in the pores is directly influenced by these primary binding sites. PMID:28194014

  18. Scalable synthesis and post-modification of a mesoporous metal-organic framework called NU-1000.

    PubMed

    Wang, Timothy C; Vermeulen, Nicolaas A; Kim, In Soo; Martinson, Alex B F; Stoddart, J Fraser; Hupp, Joseph T; Farha, Omar K

    2016-01-01

    The synthesis of NU-1000, a highly robust mesoporous (containing pores >2 nm) metal-organic framework (MOF), can be conducted efficiently on a multigram scale from inexpensive starting materials. Tetrabromopyrene and (4-(ethoxycarbonyl)phenyl)boronic acid can easily be coupled to prepare the requisite organic strut with four metal-binding sites in the form of four carboxylic acids, while zirconyl chloride octahydrate is used as a precursor for the well-defined metal oxide clusters. NU-1000 has been reported as an excellent candidate for the separation of gases, and it is a versatile scaffold for heterogeneous catalysis. In particular, it is ideal for the catalytic deactivation of nerve agents, and it shows great promise as a new generic platform for a wide range of applications. Multiple post-synthetic modification protocols have been developed using NU-1000 as the parent material, making it a potentially useful scaffold for several catalytic applications. The procedure for the preparation of NU-1000 can be scaled up reliably, and it is suitable for the production of 50 g of the tetracarboxylic acid containing organic linker and 200 mg-2.5 g of NU-1000. The entire synthesis is performed without purification by column chromatography and can be completed within 10 d.

  19. High-capacity hydrogen and nitric oxide adsorption and storage in a metal-organic framework.

    PubMed

    Xiao, Bo; Wheatley, Paul S; Zhao, Xuebo; Fletcher, Ashleigh J; Fox, Sarah; Rossi, Adriano G; Megson, Ian L; Bordiga, S; Regli, L; Thomas, K Mark; Morris, Russell E

    2007-02-07

    Gas adsorption experiments have been carried out on a copper benzene tricarboxylate metal-organic framework material, HKUST-1. Hydrogen adsorption at 1 and 10 bar (both 77 K) gives an adsorption capacity of 11.16 mmol H2 per g of HKUST-1 (22.7 mg g(-)1, 2.27 wt %) at 1 bar and 18 mmol per g (36.28 mg g(-)1, 3.6 wt %) at 10 bar. Adsorption of D2 at 1 bar (77 K) is between 1.09 (at 1 bar) and 1.20(at <100 mbar) times the H2 values depending on the pressure, agreeing with the theoretical expectations. Gravimetric adsorption measurements of NO on HKUST-1 at 196 K (1 bar) gives a large adsorption capacity of approximately 9 mmol g(-1), which is significantly greater than any other adsorption capacity reported on a porous solid. At 298 K the adsorption capacity at 1 bar is just over 3 mmol g(-1). Infra red experiments show that the NO binds to the empty copper metal sites in HKUST-1. Chemiluminescence and platelet aggregometry experiments indicate that the amount of NO recovered on exposure of the resulting complex to water is enough to be biologically active, completely inhibiting platelet aggregation in platelet rich plasma.

  20. Metal-organic framework-based molecular beacons for multiplexed DNA detection by synchronous fluorescence analysis.

    PubMed

    Ye, Tai; Liu, Yufei; Luo, Ming; Xiang, Xia; Ji, Xinghu; Zhou, Guohua; He, Zhike

    2014-04-07

    We report a new sensor combined two dimensional metal-organic framework (MOF), N,N-bis(2-hydroxy-ethyl)dithiooxamidato copper(II) (H2dtoaCu), with the hairpin-structured oligonucleotides and demonstrate its feasibility in detecting multiplexed sequence-specific DNA. The key component of this sensor (MOF-MBs) is the hairpin-structured fluorescent oligonucleotide that allows the MOFs to function as both a "nanoscaffold" for the oligonucleotide and a "nanoquencher" of the fluorophore. An oligonucleotide sequence fragment of wild-type HBV (T1) and a reverse-transcription oligonucleotide sequence of RNA fragment of HIV (T2) were used as model systems. While in the presence of the targets, the fluorescence of dyes was recovered by forming a double strand structure. Multiplex DNA detection can be realized by synchronous scanning fluorescence spectrometry, and there was no cross reaction between the two probes. Under the optimum conditions, the fluorescence intensities of two dyes all exhibit good linear dependence on their target DNA concentration in the range of 1-10 nM with the detection limit of 0.87 nM and 0.22 nM for T1 and T2, respectively. As a proof of concept, the MOF-MBs have been successfully used as a potential sensing platform for simultaneous detection of multiplexed DNA.

  1. Synthesis of magnetic metal-organic framework (MOF) for efficient removal of organic dyes from water

    PubMed Central

    Zhao, Xiaoli; Liu, Shuangliu; Tang, Zhi; Niu, Hongyun; Cai, Yaqi; Meng, Wei; Wu, Fengchang; Giesy, John P.

    2015-01-01

    A novel, simple and efficient strategy for fabricating a magnetic metal-organic framework (MOF) as sorbent to remove organic compounds from simulated water samples is presented and tested for removal of methylene blue (MB) as an example. The novel adsorbents combine advantages of MOFs and magnetic nanoparticles and possess large capacity, low cost, rapid removal and easy separation of the solid phase, which makes it an excellent sorbent for treatment of wastewaters. The resulting magnetic MOFs composites (also known as MFCs) have large surface areas (79.52 m2 g−1), excellent magnetic response (14.89 emu g−1), and large mesopore volume (0.09 cm3 g−1), as well as good chemical inertness and mechanical stability. Adsorption was not drastically affected by pH, suggesting π–π stacking interaction and/or hydrophobic interactions between MB and MFCs. Kinetic parameters followed pseudo-second-order kinetics and adsorption was described by the Freundlich isotherm. Adsorption capacity was 84 mg MB g−1 at an initial MB concentration of 30 mg L−1, which increased to 245 mg g−1 when the initial MB concentration was 300 mg L−1. This capacity was much greater than most other adsorbents reported in the literature. In addition, MFC adsorbents possess excellent reusability, being effective after at least five consecutive cycles. PMID:26149818

  2. Sintering-Resistant Single-Site Nickel Catalyst Supported by Metal-Organic Framework.

    PubMed

    Li, Zhanyong; Schweitzer, Neil M; League, Aaron B; Bernales, Varinia; Peters, Aaron W; Getsoian, Andrew Bean; Wang, Timothy C; Miller, Jeffrey T; Vjunov, Aleksei; Fulton, John L; Lercher, Johannes A; Cramer, Christopher J; Gagliardi, Laura; Hupp, Joseph T; Farha, Omar K

    2016-02-17

    Developing supported single-site catalysts is an important goal in heterogeneous catalysis since the well-defined active sites afford opportunities for detailed mechanistic studies, thereby facilitating the design of improved catalysts. We present herein a method for installing Ni ions uniformly and precisely on the node of a Zr-based metal-organic framework (MOF), NU-1000, in high density and large quantity (denoted as Ni-AIM) using atomic layer deposition (ALD) in a MOF (AIM). Ni-AIM is demonstrated to be an efficient gas-phase hydrogenation catalyst upon activation. The structure of the active sites in Ni-AIM is proposed, revealing its single-site nature. More importantly, due to the organic linker used to construct the MOF support, the Ni ions stay isolated throughout the hydrogenation catalysis, in accord with its long-term stability. A quantum chemical characterization of the catalyst and the catalytic process complements the experimental results. With validation of computational modeling protocols, we further targeted ethylene oligomerization catalysis by Ni-AIM guided by theoretical prediction. Given the generality of the AIM methodology, this emerging class of materials should prove ripe for the discovery of new catalysts for the transformation of volatile substrates.

  3. Mechanically Interlocked Linkers inside Metal-Organic Frameworks: Effect of Ring Size on Rotational Dynamics.

    PubMed

    Vukotic, V Nicholas; O'Keefe, Christopher A; Zhu, Kelong; Harris, Kristopher J; To, Christine; Schurko, Robert W; Loeb, Stephen J

    2015-08-05

    A series of metal-organic framework (MOF) materials has been prepared, each containing a mechanically interlocked molecule (MIM) as the linker and a copper(II) paddlewheel as the secondary building unit (SBU). The MIM linkers are [2]rotaxanes with varying sizes of crown ether macrocycles ([22]crown-6, 22C6; [24]crown-6, 24C6; [26]crown-6, 26C6; benzo[24]crown-6, B24C6) and an anilinium-based axle containing four carboxylate donor groups. Herein, the X-ray structures of MOFs UWCM-1 (no crown) and UWDM-1(22) are compared and demonstrate the effect of including a macrocycle around the axle of the linker. The rotaxane linkers are linear and result in nbo-type MOFs with void space that allows for motion of the interlocked macrocycle inside the MOF pores, while the macrocycle-free linker is bent and yields a MOF with a novel 12-connected bcc structure. Variable temperature (2)H solid-state nuclear magnetic resonance showed that the macrocycles in UWDM-1(22), UWDM-1(24), and UWDM-1(B24) undergo different degrees and rates of rotation depending on the size and shape of the macrocycle.

  4. Functionalization of metal-organic frameworks through the postsynthetic transformation of olefin side groups.

    PubMed

    Hindelang, Konrad; Kronast, Alexander; Vagin, Sergei I; Rieger, Bernhard

    2013-06-17

    For the first time, the adaptability of the C=C double bond as a versatile precursor for the postsynthetic modification (PSM) of microporous materials was extensively investigated and evaluated. Therefore, an olefin-tagged 4,4'-bipyridine linker was synthesized and successfully introduced as pillar linker within a 9,10-triptycenedicarboxylate (TDC) zinc paddle-wheel metal-organic framework (MOF) through microwave-assisted synthesis. Different reactions, predominately used in organic chemistry, were tested, leading to the development of new postsynthetic reactions for the functionalization of solid materials. The postsynthetic oxidation of the olefin side groups applying osmium tetroxide (OsO₄) as a catalyst led to the formation of a microporous material with free vicinal diol functionalities. The epoxidation with dimethyldioxirane (DMDO) enabled the synthesis of epoxy-functionalized MOFs. In addition to that, reaction procedures for a postsynthetic hydroboration with borane dimethyl sulfide as well as a photoinduced thiol-ene click reaction with ethyl mercaptan were developed. For all of these PSMs, yields of more than 90% were obtained, entirely maintaining the crystallinity of the MOFs. Since the direct introduction of the corresponding groups by means of pre-synthetic approaches is hardly possible, these new PSMs are useful tools for the functionalization of porous solids towards applications such as selective adsorption, separation, and catalysis.

  5. Introduction of functionalized mesopores to metal-organic frameworks via metal-ligand-fragment coassembly.

    PubMed

    Park, Jinhee; Wang, Zhiyong U; Sun, Lin-Bing; Chen, Ying-Pin; Zhou, Hong-Cai

    2012-12-12

    Introduction of functionalized mesopores into microporous metal-organic frameworks (MOFs) can endow them with suitable properties for applications in gas storage, separation, catalysis, and drug delivery. However, common methods for functionalization (including pre- and post-synthetic modifications) of the internal surface of a MOF reduce the pore size of the MOF because the additional functional groups fill up the pores. We present a metal-ligand-fragment coassembly strategy for the introduction of (meso)pores functionalized with various substituent groups on the ligand fragments. Astonishingly, this new functionalization strategy increases the pore volume of a MOF instead of reducing it. Since the ligand fragments are often readily available or easily prepared, the new procedure for synthesis of the modified MOFs becomes much easier and more applicable than existing approaches. Remarkably, mesopores can be generated conveniently and controllably by the coassembly of a ligand and its fragment containing the desired functional groups. The fragment/ligand ratio has been optimized to preserve the parent structure and to promote maximum mesopore introduction, which has led to a systematic evaluation of the effectiveness of a series of functional groups for the adsorption of guest molecules.

  6. Ab Initio Prediction of Adsorption Isotherms for Small Molecules in Metal-Organic Frameworks.

    PubMed

    Kundu, Arpan; Piccini, GiovanniMaria; Sillar, Kaido; Sauer, Joachim

    2016-10-17

    For CO and N2 on Mg(2+) sites of the metal-organic framework CPO-27-Mg (Mg-MOF-74), ab initio calculations of Gibbs free energies of adsorption have been performed. Combined with the Bragg-Williams/Langmuir model and taking into account the experimental site availability (76.5%), we obtained adsorption isotherms in close agreement with those in experiment. The remaining deviations in the Gibbs free energy (about 1 kJ/mol) are significantly smaller than the "chemical accuracy" limit of about 4 kJ/mol. The presented approach uses (i) a DFT dispersion method (PBE+D2) to optimize the structure and to calculate anharmonic frequencies for vibrational partition functions and (ii) a "hybrid MP2:(PBE+D2)+ΔCCSD(T)" method to determine electronic energies. With the achieved accuracy (estimated uncertainty ±1.4 kJ/mol), the ab initio energies become useful benchmarks for assessing different DFT + dispersion methods (PBE+D2, B3LYP+D*, and vdW-D2), whereas the ab initio heats, entropies, and Gibbs free energies of adsorption are used to assess the reliability of experimental values derived from fitting isotherms or from variable-temperature IR studies.

  7. Formation of a new archetypal Metal-Organic Framework from a simple monatomic liquid.

    PubMed

    Metere, Alfredo; Oleynikov, Peter; Dzugutov, Mikhail; O'Keeffe, Michael

    2014-12-21

    We report a molecular-dynamics simulation of a single-component system of particles interacting via a spherically symmetric potential that is found to form, upon cooling from a liquid state, a low-density porous crystalline phase. Its structure analysis demonstrates that the crystal can be described by a net with a topology that belongs to the class of topologies characteristic of the Metal-Organic Frameworks (MOFs). The observed net is new, and it is now included in the Reticular Chemistry Structure Resource database. The observation that a net topology characteristic of MOF crystals, which are known to be formed by a coordination-driven self-assembly process, can be reproduced by a thermodynamically stable configuration of a simple single-component system of particles opens a possibility of using these models in studies of MOF nets. It also indicates that structures with MOF topology, as well as other low-density porous crystalline structures can possibly be produced in colloidal systems of spherical particles, with an appropriate tuning of interparticle interaction.

  8. Metal Insertion in a Microporous Metal-Organic Framework Lined with 2,2'-Bipyridine

    SciTech Connect

    Bloch, Eric D.; Britt, David; Lee, Chain; Doonan, Christian J.; Uribe-Romo, Fernando J.; Furukawa, Hiroyasu; Long, Jeffrey R.; Yaghi, Omar M.

    2010-10-20

    Reaction of AlCl3·6H2O with 2,2'-bipyridine-5,5'-dicarboxylic acid (H2bpydc) affords Al(OH)(bpydc) (1, MOF-253), the first metal-organic framework with open 2,2'-bipyridine (bpy) coordination sites. The material displays a BET surface area of 2160 m2/g and readily complexes metals to afford, for example, 1·xPdCl2 (x = 0.08, 0.83) and 1·0.97Cu(BF4)2. EXAFS spectroscopy performed on 1·0.83PdCl2 reveals the expected square planar coordination geometry, matching the structure of the model complex (bpy)PdCl2. Finally, significantly, the selectivity factor for binding CO2 over N2 under typical flue gas conditions is observed to increase from 2.8 in 1 to 12 in 1·0.97Cu(BF4)2.

  9. Computational Discovery of Metal-Organic Frameworks for CO2 Capture and Energy Storage

    NASA Astrophysics Data System (ADS)

    Siegel, Donald

    2015-03-01

    Because of their high surface areas, crystallinity, and tunable properties, metal -organic frameworks (MOFs) have attracted intense interest as materials for gas capture and energy storage. An often-cited benefit of MOFs is their large number of possible structures and compositions. Nevertheless, this design flexibility also has drawbacks, as pinpointing optimal compounds from thousands of candidates can be time consuming and costly using experimental approaches. Consequently, computational approaches are garnering increasing importance as a means to accelerate the discovery of high-performing MOFs. Here we combine several computational techniques to identify promising MOFs for CO2 capture and the storage of gaseous fuels (methane and hydrogen). The techniques include: (i) high-throughput screening based on data-mining and empirical correlations; (ii) Monte Carlo simulations based on quantum-mechanically-informed forcefields; and (iii) first-principles calculations of thermodynamics and electronic structure. For CO2 capture and CH4 storage, these techniques are used to explore metal-substituted variants of M-DOBDC and M-HKUST-1. In the case of H2, we identify trends and promising adsorbents amongst 4,000 compounds mined from the Cambridge Structure Database.

  10. High internal ionic liquid phase emulsion stabilized by metal-organic frameworks.

    PubMed

    Li, Zhihao; Zhang, Jianling; Luo, Tian; Tan, Xiuniang; Liu, Chengcheng; Sang, Xinxin; Ma, Xue; Han, Buxing; Yang, Guanying

    2016-11-04

    The emulsification of metal-organic frameworks (MOFs) for the two immiscible phases of water and ionic liquid (IL) was investigated for the first time. It was found that Ni-BDC (BDC = 1,4-dicarboxybenzene) can emulsify water and ILs and favor the formation of high internal phase emulsions (HIPEs) under certain experimental conditions. The microstructures of the HIPEs were characterized by confocal laser scanning microscopy using a fluorescent dye Rhodamine B, which proves that the HIPEs are the IL-in-water type. Further results reveal that the HIPE forms during the IL-in-water to water-in-IL emulsion inversion. The possibilities of the HIPE formation by other MOFs (Cu-BDC and Zn-BDC) were explored and the mechanism for HIPE formation was discussed. The MOF-stabilized HIPE was applied to the in situ synthesis of a MOF/polymer composite by HIPE polymerization. The macroporous MOF/polyacrylamide network and MOF/polystyrene microspheres were obtained from the HIPEs, respectively.

  11. Adsorption of carbon dioxide, methane and nitrogen on an ultramicroporous copper metal-organic framework.

    PubMed

    Wu, Xiaofei; Yuan, Bin; Bao, Zongbi; Deng, Shuguang

    2014-09-15

    An ultramicroporous copper metal-organic framework (Cu-MOF), Cu(hfipbb)(H2hfipbb)0.5 [H2hfipbb=4,4'-(hexafluoro-isopropylidene) bis(benzoic acid)] was successfully synthesized by a microwave-assisted method (1) with a shorter reaction time and higher MOFs yield. The obtained Cu-MOF sample was characterized with scanning electron microscopy for crystal structure, powder X-ray diffraction for phase structure, and carbon dioxide adsorption at 273 K for pore textural properties. Single-component adsorption (adsorption equilibrium and kinetics) of CO2, CH4, and N2 on 1 was measured using a Micromeritics ASAP 2020 adsorption porosimeter at 278, 298 and 318 K, and pressures up to 1 bar. Isosteric heats of adsorption, Henry's constants, and diffusion time constants were calculated and carefully analyzed. Adsorption equilibrium selectivity (α), adsorbent selection parameter for pressure swing adsorption processes (S), kinetic selectivity and combined separation selectivity (β) for CO2/CH4, CO2/N2 and CH4/N2 binary mixtures were estimated based on the single-component adsorption data. The relative high values of the adsorption selectivities suggest that Cu-MOF is a promising adsorbent for separating CO2/CH4, CO2/N2 and CH4/N2 gas pairs.

  12. A porous metal-organic framework with ultrahigh acetylene uptake capacity under ambient conditions

    PubMed Central

    Pang, Jiandong; Jiang, Feilong; Wu, Mingyan; Liu, Caiping; Su, Kongzhao; Lu, Weigang; Yuan, Daqiang; Hong, Maochun

    2015-01-01

    Acetylene, an important petrochemical raw material, is very difficult to store safely under compression because of its highly explosive nature. Here we present a porous metal-organic framework named FJI-H8, with both suitable pore space and rich open metal sites, for efficient storage of acetylene under ambient conditions. Compared with existing reports, FJI-H8 shows a record-high gravimetric acetylene uptake of 224 cm3 (STP) g−1 and the second-highest volumetric uptake of 196 cm3 (STP) cm−3 at 295 K and 1 atm. Increasing the storage temperature to 308 K has only a small effect on its acetylene storage capacity (∼200 cm3 (STP) g−1). Furthermore, FJI-H8 exhibits an excellent repeatability with only 3.8% loss of its acetylene storage capacity after five cycles of adsorption–desorption tests. Grand canonical Monte Carlo simulation reveals that not only open metal sites but also the suitable pore space and geometry play key roles in its remarkable acetylene uptake. PMID:26123775

  13. Upconversion fluorescence metal-organic frameworks thermo-sensitive imprinted polymer for enrichment and sensing protein.

    PubMed

    Guo, Ting; Deng, Qiliang; Fang, Guozhen; Gu, Dahai; Yang, Yukun; Wang, Shuo

    2016-05-15

    A novel fluorescence material with thermo-sensitive for the enrichment and sensing of protein was successfully prepared by combining molecular imprinting technology with upconversion nanoparticles (UCNPs) and metal-organic frameworks (MOFs). Herein, the UCNPs acted as signal reporter for composite materials because of its excellent fluorescence property and chemical stability. MOFs were introduced to molecularly imprinted polymer (MIP) due to its high specific surface area which increases the rate of mass transfer relative to that of traditional bulk MIP. The thermo-sensitive imprinted material which allows for swelling and shrinking with response to temperature changes was prepared by choosing Bovine hemoglobin (BHB) as the template, N-isopropyl acrylamide (NIPAAM) as the temperature-sensitive functional monomer and N,N-methylenebisacrylamide (MBA) as the cross-linker. The recognition characterizations of imprinted material-coated UCNPs/MOFs (UCNPs/MOFs/MIP) were evaluated, and the results showed that the fluorescence intensity of UCNPs/MOFs/MIP reduced gradually with the increase of BHB concentration. The fluorescence material was response to the temperature. The adsorption capacity was as much as 167.6 mg/g at 28°C and 101.2mg/g at 44°C, which was higher than that of traditional MIP. Therefore, this new fluorescence material for enrichment and sensing protein is very promising for future applications.

  14. Constructing Free Standing Metal Organic Framework MIL-53 Membrane Based on Anodized Aluminum Oxide Precursor

    NASA Astrophysics Data System (ADS)

    Zhang, Yunlu; Gao, Qiuming; Lin, Zhi; Zhang, Tao; Xu, Jiandong; Tan, Yanli; Tian, Weiqian; Jiang, Lei

    2014-05-01

    Metal organic framework (MOF) materials have attracted great attention due to their well-ordered and controllable pores possessing of prominent potentials for gas molecule sorption and separation performances. Organizing the MOF crystals to a continuous membrane with a certain scale will better exhibit their prominent potentials. Reports in recent years concentrate on well grown MOF membranes on specific substrates. Free standing MOF membranes could have more important applications since they are independent from the substrates. However, the method to prepare such a membrane has been a great challenge because good mechanical properties and stabilities are highly required. Here, we demonstrate a novel and facile technique for preparing the free standing membrane with a size as large as centimeter scale. The substrate we use proved itself not only a good skeleton but also an excellent precursor to fulfill the reaction. This kind of membrane owns a strong mechanical strength, based on the fact that it is much thinner than the composite membranes grown on substrates and it could exhibit good property of gas separation.

  15. Carborane-Based Metal-Organic Framework with High Methane and Hydrogen Storage Capacities

    SciTech Connect

    Kennedy, RD; Krungleviciute, V; Clingerman, DJ; Mondloch, JE; Peng, Y; Wilmer, CE; Sarjeant, AA; Snurr, RQ; Hupp, JT; Yildirim, T; Farha, OK; Mirkin, CA

    2013-09-10

    A Cu-carborane-based metal organic framework (MOF), NU-135, which contains a quasi-spherical para-carborane moiety, has been synthesized and characterized. NU-135 exhibits a pore volume of 1.02 cm(3)/g and a gravimetric BET surface area of ca. 2600 m(2)/g, and thus represents the first highly porous carborane-based MOF. As a consequence of the, unique geometry of the carborane unit, NU-135 has a very high volumetric BET surface area of ca. 1900 m(2)/cm(3). CH4, CO2, and H-2 adsorption isotherms were measured over a broad range of pressures and temperatures and are in good agreement with computational predictions. The methane storage capacity of NU-135 at 35 bar and 298 K is ca. 187 v(STP)/v. At 298 K, the pressure required to achieve a methane storage density comparable to that of a compressed natural gas (CNG) tank pressurized to 212 bar, which is a typical storage pressure, is only 65 bar. The methane working capacity (5-65 bar) is 170 v(STP)/v. The volumetric hydrogen storage capacity at 55 bar and 77 K is 49 g/L. These properties are comparable to those of current record holders in the area of methane and hydrogen storage. This initial example lays the groundwork for carborane-based materials with high surface areas.

  16. A new zirconium inorganic building brick forming metal organic frameworks with exceptional stability.

    PubMed

    Cavka, Jasmina Hafizovic; Jakobsen, Søren; Olsbye, Unni; Guillou, Nathalie; Lamberti, Carlo; Bordiga, Silvia; Lillerud, Karl Petter

    2008-10-22

    Porous crystals are strategic materials with industrial applications within petrochemistry, catalysis, gas storage, and selective separation. Their unique properties are based on the molecular-scale porous character. However, a principal limitation of zeolites and similar oxide-based materials is the relatively small size of the pores, typically in the range of medium-sized molecules, limiting their use in pharmaceutical and fine chemical applications. Metal organic frameworks (MOFs) provided a breakthrough in this respect. New MOFs appear at a high and an increasing pace, but the appearances of new, stable inorganic building bricks are rare. Here we present a new zirconium-based inorganic building brick that allows the synthesis of very high surface area MOFs with unprecedented stability. The high stability is based on the combination of strong Zr-O bonds and the ability of the inner Zr6-cluster to rearrange reversibly upon removal or addition of mu3-OH groups, without any changes in the connecting carboxylates. The weak thermal, chemical, and mechanical stability of most MOFs is probably the most important property that limits their use in large scale industrial applications. The Zr-MOFs presented in this work have the toughness needed for industrial applications; decomposition temperature above 500 degrees C and resistance to most chemicals, and they remain crystalline even after exposure to 10 tons/cm2 of external pressure.

  17. Quasi-1D physics in metal-organic frameworks: MIL-47(V) from first principles

    PubMed Central

    Jaeken, Jan W; De Baerdemacker, Stijn; Lejaeghere, Kurt; Van Speybroeck, Veronique

    2014-01-01

    Summary The geometric and electronic structure of the MIL-47(V) metal-organic framework (MOF) is investigated by using ab initio density functional theory (DFT) calculations. Special focus is placed on the relation between the spin configuration and the properties of the MOF. The ground state is found to be antiferromagnetic, with an equilibrium volume of 1554.70 Å3. The transition pressure of the pressure-induced large-pore-to-narrow-pore phase transition is calculated to be 82 MPa and 124 MPa for systems with ferromagnetic and antiferromagnetic chains, respectively. For a mixed system, the transition pressure is found to be a weighted average of the ferromagnetic and antiferromagnetic transition pressures. Mapping DFT energies onto a simple-spin Hamiltonian shows both the intra- and inter-chain coupling to be antiferromagnetic, with the latter coupling constant being two orders of magnitude smaller than the former, suggesting the MIL-47(V) to present quasi-1D behavior. The electronic structure of the different spin configurations is investigated and it shows that the band gap position varies strongly with the spin configuration. The valence and conduction bands show a clear V d-character. In addition, these bands are flat in directions orthogonal to VO6 chains, while showing dispersion along the the direction of the VO6 chains, similar as for other quasi-1D materials. PMID:25383285

  18. Molecular modeling of zinc paddlewheel molecular complexes and the pores of a flexible metal organic framework.

    PubMed

    Alzahrani, Khalid A H; Deeth, Robert J

    2016-04-01

    A new all-atom first-principles force field (FF) is constructed for the bimetallic, four-bladed zinc paddlewheel (ZPW) motif. Zinc-ligand interactions are described via Morse functions and the angular geometry at the metal centers is modeled with a pure ligand-ligand repulsion term. The ZPW-FF is principally based on 15 DFT-optimized model systems of general formula ZnPR.nL, where ZnP is the base Zn2(O2CR)4 unit, R = H, CH3 or CF3, L = NH3 or pyridine, and n = 0, 1 or 2. It correctly generates the distorted tetrahedral coordination of the uncapped [Zn2(O2CR)4] species in their ground states as well as giving reasonable structures and energies for the higher symmetry D4h transition state conformations. The zinc-ligand Morse function reference distance, r 0 , is further refined against 30 complexes located in the Cambridge Structural Database and this FF is applied to pore models of the flexible metal-organic framework (MOF) [Zn(bdc)2(dabco)]n (bdc = 1,4-benzendicarboxylate; dabco = 1,4-diazabicyclo(2.2.2)octane). A single pore model reproduces the unit cell of the evacuated MOF system while a 3×3 grid model is necessary to provide good agreement with the observed pronounced structural changes upon adsorption of either dimethylformamide or benzene.

  19. Constructing Free Standing Metal Organic Framework MIL-53 Membrane Based on Anodized Aluminum Oxide Precursor

    PubMed Central

    Zhang, Yunlu; Gao, Qiuming; Lin, Zhi; Zhang, Tao; Xu, Jiandong; Tan, Yanli; Tian, Weiqian; Jiang, Lei

    2014-01-01

    Metal organic framework (MOF) materials have attracted great attention due to their well-ordered and controllable pores possessing of prominent potentials for gas molecule sorption and separation performances. Organizing the MOF crystals to a continuous membrane with a certain scale will better exhibit their prominent potentials. Reports in recent years concentrate on well grown MOF membranes on specific substrates. Free standing MOF membranes could have more important applications since they are independent from the substrates. However, the method to prepare such a membrane has been a great challenge because good mechanical properties and stabilities are highly required. Here, we demonstrate a novel and facile technique for preparing the free standing membrane with a size as large as centimeter scale. The substrate we use proved itself not only a good skeleton but also an excellent precursor to fulfill the reaction. This kind of membrane owns a strong mechanical strength, based on the fact that it is much thinner than the composite membranes grown on substrates and it could exhibit good property of gas separation. PMID:24821299

  20. Synthesis of metal-organic framework films by pore diffusion method

    NASA Astrophysics Data System (ADS)

    Murayama, Naohiro; Nishimura, Yuki; Kajiro, Hiroshi; Kishida, Satoru; Kinoshita, Kentaro; Tottori Univ Team; Nippon Steel; Sumitomo Metal Co. Collaboration; Tottori Integrated Frontier Resaerch Center (Tifrec) Collaboration; Tottori University Electronic Display Resaerch Center (Tedrec) Collaboration

    Metal-organic frameworks (MOFs) presents high controllability in designing the nano-scale pore, and this enable molecular storages, catalysts, gas sensors, gas separation membranes, and electronic devices for next-generation. Therefore, a simple method for film synthesis of MOFs compared with conventional methods [1] is strongly required. In this paper, we provide pore diffusion method, in which a substrate containing constituent metals of MOF is inserted in solution that includes only linker molecules of MOF. As a result, 2D growth of MOF was effectively enhanced, and the formation of flat and dense MOF films was attained. The growth time, t, dependence of film thickness, d, can be expressed by the relation of d = Aln(t + 1) + B, where A and B are constants. It means that ionized coppers diffuse through the pores of MOFs and the synthesis reaction proceeds at the MOF/solvent interface. We demonstrated the fabrication of a HKUST-1/Cu-TPA hetero structure by synthesizing a Cu-TPA film continuously after the growth of a HKUST-1 film on the CuOx substrate.

  1. Kinetic and steric differences in adsorption in two porous metal-organic frameworks

    NASA Astrophysics Data System (ADS)

    Lask, Kathleen; Krungleviciute, Vaiva; Bulut, Murat; Migone, Aldo; Lee, J.-Y.; Li, Jing

    2008-03-01

    Kinetic and steric differences are two of the three fundamental mechanisms underlying the use of adsorption in applications to gas mixture separations. We present experimental results on kinetics and equilibrium adsorption measurements of tetrafluoromethane and argon on two metal-organic framework (MOF) materials: RPM1-Co or [Co3(bpdc)3bpy].4DMF.H2O] (bpdc = biphenyldicarboxylate, bpy = 4,4'-bipyridine, DMF = N,N- dimethylformamide) and Cu-BTC or Cu3(BTC)2(H2O)3 (BTC = benzene-1,3,5-tricarboxylate). The adsorbates display significant differences in their kinetics on RPM1-Co (i.e., there are sizable differences in the time required for each gas to reach equilibrium after it is allowed access to the substrate). Our equilibrium measurements show that CF4 is sterically precluded from adsorbing in the small tetrahedral-shaped side pockets present in Cu-BTC. We will compare our experimental results with predictions for how adsorption kinetics depends on the size of the adsorbate and on those of the pores present in the substrate.

  2. Efficient purification of ethene by an ethane-trapping metal-organic framework

    NASA Astrophysics Data System (ADS)

    Liao, Pei-Qin; Zhang, Wei-Xiong; Zhang, Jie-Peng; Chen, Xiao-Ming

    2015-10-01

    Separating ethene (C2H4) from ethane (C2H6) is of paramount importance and difficulty. Here we show that C2H4 can be efficiently purified by trapping the inert C2H6 in a judiciously designed metal-organic framework. Under ambient conditions, passing a typical cracked gas mixture (15:1 C2H4/C2H6) through 1 litre of this C2H6 selective adsorbent directly produces 56 litres of C2H4 with 99.95%+ purity (required by the C2H4 polymerization reactor) at the outlet, with a single breakthrough operation, while other C2H6 selective materials can only produce ca. <= litre, and conventional C2H4 selective adsorbents require at least four adsorption-desorption cycles to achieve the same C2H4 purity. Single-crystal X-ray diffraction and computational simulation studies showed that the exceptional C2H6 selectivity arises from the proper positioning of multiple electronegative and electropositive functional groups on the ultramicroporous pore surface, which form multiple C-H...N hydrogen bonds with C2H6 instead of the more polar competitor C2H4.

  3. Reversible Capture and Release of Elemental Halogens with a Redox-Active Metal-Organic Framework.

    PubMed

    Tulchinsky, Yuri; Hendon, Christopher H; Lomachenko, Kirill A; Borfecchia, Elisa; Melot, Brent C; Hudson, Matthew R; Tarver, Jacob D; Korzynski, Maciej D; Stubbs, Amanda W; Kagan, Jacob J; Lamberti, Carlo; Brown, Craig M; Dinca, Mircea

    2017-03-28

    Extreme toxicity, corrosiveness, and volatility pose serious challenges for the safe storage and transportation of elemental chlorine and bromine, which play critical roles in the chemical industry. Solid materials capable of forming stable non-volatile compounds upon reaction with elemental halogens may partially mitigate these challenges by allowing safe halogen release on demand. Here, we demonstrate that elemental halogens quantitatively oxidize coordinatively unsaturated Co(II) ions in a robust azolate metal-organic framework (MOF) to produce an air-stable and safe-to-handle Co(III) material featuring terminal Co(III)-halogen bonds. Thermal treatment of the oxidized MOF causes homolytic cleavage of the Co(III)-halogen bonds, reduction to Co(II), and concomitant release of elemental halogens. Remarkably, the reversible chemical storage and thermal release of elemental halogens occur with no significant losses of structural integrity, the parent cobaltous MOF retaining crystallinity and porosity even after three oxidation/reduction cycles. These results highlight a material operating via redox mechanism that may find utility in the storage and capture of other noxious and corrosive gases.

  4. Electronic origins of photocatalytic activity in d0 metal organic frameworks

    PubMed Central

    Nasalevich, Maxim A.; Hendon, Christopher H.; Santaclara, Jara G.; Svane, Katrine; van der Linden, Bart; Veber, Sergey L.; Fedin, Matvey V.; Houtepen, Arjan J.; van der Veen, Monique A.; Kapteijn, Freek; Walsh, Aron; Gascon, Jorge

    2016-01-01

    Metal-organic frameworks (MOFs) containing d0 metals such as NH2-MIL-125(Ti), NH2-UiO-66(Zr) and NH2-UiO-66(Hf) are among the most studied MOFs for photocatalytic applications. Despite structural similarities, we demonstrate that the electronic properties of these MOFs are markedly different. As revealed by quantum chemistry, EPR measurements and transient absorption spectroscopy, the highest occupied and lowest unoccupied orbitals of NH2-MIL-125(Ti) promote a long lived ligand-to-metal charge transfer upon photoexcitation, making this material suitable for photocatalytic applications. In contrast, in case of UiO materials, the d-orbitals of Zr and Hf, are too low in binding energy and thus cannot overlap with the π* orbital of the ligand, making both frontier orbitals localized at the organic linker. This electronic reconfiguration results in short exciton lifetimes and diminishes photocatalytic performance. These results highlight the importance of orbital contributions at the band edges and delineate future directions in the development of photo-active hybrid solids. PMID:27020767

  5. Water-Based Assembly of Polymer-Metal Organic Framework (MOF) Functional Coatings

    SciTech Connect

    De, Souvik; Nandasiri, Manjula I.; Schaef, Herbert T.; McGrail, Benard Peter; Nune, Satish K.; Lutkenhaus, Jodie L.

    2016-12-27

    Metal organic frameworks (MOFs) have gained tremendous attention for their porosity, size selectivity, and structural diversity. There is a need for MOF-based coatings, particularly in applications such as separations, electronics and energy; yet forming thin, functional, conformal coatings is prohibitive because MOFs exist as a powder. Layer-by- layer assembly, a versatile thin film coating approach, offers a unique solution to this problem, but this approach requires MOFs that are water-dispersible and bear a surface charge. Here, we address these issues by examining water-based dispersions of MIL-101(Cr) that facilitate the formation of robust polymer-MOF hybrid coatings. Specifically, the substrate to be coated is alternately exposed to an aqueous solution of poly(styrene sulfonate) and dispersion MIL-101(Cr), yielding linear film growth and coatings with a MOF content as high as 77 wt%.This approach is surface-agnostic, in which the coating is successfully applied to silicon, glass, flexible plastic, and even cotton fabric, conformally coating individual fibers. In contrast, prior attempts at forming MOF-coatings were severely limited to a handful of surfaces, required harsh chemical treatment, and were not conformal. The approach presented here unambiguously confirms that MOFs can be conformally coated onto complex and unusual surfaces, opening the door for a wide variety of applications.

  6. Supramolecular architecture of metal-organic frameworks involving dinuclear copper paddle-wheel complexes.

    PubMed

    Gomathi, Sundaramoorthy; Muthiah, Packianathan Thomas

    2013-12-15

    The two centrosymmetric dinuclear copper paddle-wheel complexes tetrakis(μ-4-hydroxybenzoato-κ(2)O:O')bis[aquacopper(II)] dimethylformamide disolvate dihydrate, [Cu2(C7H5O3)4(H2O)2]·2C3H7NO·2H2O, (I), and tetrakis(μ-4-methoxybenzoato-κ(2)O:O')bis[(dimethylformamide-κO)copper(II)], [Cu2(C8H7O3)4(C3H7NO)2], (II), crystallize with half of the dinuclear paddle-wheel cage unit in the asymmetric unit and, in addition, complex (I) has one dimethylformamide (DMF) and one water solvent molecule in the asymmetric unit. In both (I) and (II), two Cu(II) ions are bridged by four syn,syn-η(1):η(1):μ carboxylate groups, showing a paddle-wheel cage-type structure with a square-pyramidal coordination geometry. The equatorial positions of (I) and (II) are occupied by the carboxylate groups of 4-hydroxy- and 4-methoxybenzoate ligands, and the axial positions are occupied by aqua and DMF ligands, respectively. The three-dimensional supramolecular metal-organic framework of (I) consists of three different R2(2)(20) and an R4(4)(36) ring motif formed via O-H···O and OW-HW···O hydrogen bonds. Complex (II) simply packs as molecular species.

  7. Tunable anisotropic thermal expansion of a porous zinc(II) metal-organic framework.

    PubMed

    Grobler, Ilne; Smith, Vincent J; Bhatt, Prashant M; Herbert, Simon A; Barbour, Leonard J

    2013-05-01

    A novel three-dimensional metal-organic framework (MOF) that displays anisotropic thermal expansion has been prepared and characterized by single-crystal X-ray diffraction (SCD) and thermal analysis. The as-prepared MOF has one-dimensional channels containing guest molecules that can be removed and/or exchanged for other guest molecules in a single-crystal to single-crystal fashion. When the original guest molecules are replaced there is a noticeable effect on the host mechanics, altering the thermal expansion properties of the material. This study of the thermal expansion coefficients of different inclusion complexes of the host MOF involved systematic alteration of guest size, i.e., methanol, ethanol, n-propanol, and isopropanol, showing that fine control over the thermal expansion coefficients can be achieved and that the coefficients can be correlated with the size of the guest. As a proof of concept, this study demonstrates the realizable principle that a single-crystal material with an exchangeable guest component (as opposed to a composite) may be used to achieve a tunable thermal expansion coefficient. In addition, this study demonstrates that greater variance in the absolute dimensions of a crystal can be achieved when one has two variables that affect it, i.e., the host-guest interactions and temperature.

  8. Graphene-Templated Synthesis of Magnetic Metal Organic Framework Nanocomposites for Selective Enrichment of Biomolecules.

    PubMed

    Cheng, Gong; Wang, Zhi-Gang; Denagamage, Sachira; Zheng, Si-Yang

    2016-04-27

    Successful control of homogeneous and complete coating of graphene or graphene-based composites with well-defined metal organic framework (MOF) layers is a great challenge. Herein, novel magnetic graphene MOF composites were constructed via a simple strategy for self-assembly of well-distributed, dense, and highly porous MOFs on both sides of graphene nanosheets. Graphene functionalized with magnetic nanoparticles and carboxylic groups on both sides was explored as the backbone and template to direct the controllable self-assembly of MOFs. The prepared composite materials have a relatively high specific surface area (345.4 m(2) g(-1)), and their average pore size is measured to be 3.2 nm. Their relatively high saturation magnetization (23.8 emu g(-1)) indicates their strong magnetism at room temperature. Moreover, the multifunctional composite was demonstrated to be a highly effective affinity material in selective extraction and separation of low-concentration biomolecules from biological samples, in virtue of the size-selection property of the unique porous structure and the excellent affinity of the composite materials. Besides providing a solution for the construction of well-defined functional graphene-based MOFs, this work could also contribute to selective extraction of biomolecules, in virtue of the universal affinity between immobilized metal ions and biomolecules.

  9. Immobilization of Metal-Organic Framework Nanocrystals for Advanced Design of Supported Nanocatalysts.

    PubMed

    Li, Ping; Zeng, Hua Chun

    2016-11-02

    In recent years, metal-organic frameworks (MOFs) have been employed as heterogeneous catalysts or precursors for synthesis of catalytic materials. However, conventional MOFs and their derivatives usually exhibit limited mass transfer and modest catalytic activities owing to a lengthy diffusion path and less exposed active sites. In contrast, it has been generally conceived that nanoscale MOFs are beneficial to materials utilization and mass transport, but their instability poses a serious issue to practical application. To tackle above challenges, herein we develop a novel and facile approach to the design and synthesis of nanocomposites through in situ growth and directed immobilization of nanoscale MOFs onto layered double hydroxides (LDH). The resulting supported nano-MOFs inherit advantages of pristine MOF nanocrystals and meanwhile gain enhanced stability and workability under reactive environments. A series of uniform nanometer-sized MOFs, including monometallic (ZIF-8, ZIF-67, and Cu-BTC) and bimetallic (CoZn-ZIF), can be readily synthesized onto hierarchically structured flowerlike MgAl-LDH supports with high dispersion and precision. Additionally, the resultant MgAl-LDH/MOFs can serve as a generic platform to prepare integrated nanocatalysts via controlled thermolysis. Knoevenagel condensation and reduction of 4-nitrophenol (4-NP) are used as model reactions for demonstrating the technological merits of these nanocatalysts. Therefore, this work elucidates that the synthetic immobilization of nanoscale MOFs onto conventional catalyst supports is a viable route to develop integrated nanocatalysts with high controllability over structural architecture and chemical composition.

  10. Formation of a new archetypal Metal-Organic Framework from a simple monatomic liquid

    NASA Astrophysics Data System (ADS)

    Metere, Alfredo; Oleynikov, Peter; Dzugutov, Mikhail; O'Keeffe, Michael

    2014-12-01

    We report a molecular-dynamics simulation of a single-component system of particles interacting via a spherically symmetric potential that is found to form, upon cooling from a liquid state, a low-density porous crystalline phase. Its structure analysis demonstrates that the crystal can be described by a net with a topology that belongs to the class of topologies characteristic of the Metal-Organic Frameworks (MOFs). The observed net is new, and it is now included in the Reticular Chemistry Structure Resource database. The observation that a net topology characteristic of MOF crystals, which are known to be formed by a coordination-driven self-assembly process, can be reproduced by a thermodynamically stable configuration of a simple single-component system of particles opens a possibility of using these models in studies of MOF nets. It also indicates that structures with MOF topology, as well as other low-density porous crystalline structures can possibly be produced in colloidal systems of spherical particles, with an appropriate tuning of interparticle interaction.

  11. Efficient purification of ethene by an ethane-trapping metal-organic framework

    PubMed Central

    Liao, Pei-Qin; Zhang, Wei-Xiong; Zhang, Jie-Peng; Chen, Xiao-Ming

    2015-01-01

    Separating ethene (C2H4) from ethane (C2H6) is of paramount importance and difficulty. Here we show that C2H4 can be efficiently purified by trapping the inert C2H6 in a judiciously designed metal-organic framework. Under ambient conditions, passing a typical cracked gas mixture (15:1 C2H4/C2H6) through 1 litre of this C2H6 selective adsorbent directly produces 56 litres of C2H4 with 99.95%+ purity (required by the C2H4 polymerization reactor) at the outlet, with a single breakthrough operation, while other C2H6 selective materials can only produce ca. ⩽ litre, and conventional C2H4 selective adsorbents require at least four adsorption–desorption cycles to achieve the same C2H4 purity. Single-crystal X-ray diffraction and computational simulation studies showed that the exceptional C2H6 selectivity arises from the proper positioning of multiple electronegative and electropositive functional groups on the ultramicroporous pore surface, which form multiple C–H···N hydrogen bonds with C2H6 instead of the more polar competitor C2H4. PMID:26510376

  12. A porous proton-relaying metal-organic framework material that accelerates electrochemical hydrogen evolution

    PubMed Central

    Hod, Idan; Deria, Pravas; Bury, Wojciech; Mondloch, Joseph E.; Kung, Chung-Wei; So, Monica; Sampson, Matthew D.; Peters, Aaron W.; Kubiak, Cliff P.; Farha, Omar K.; Hupp, Joseph T.

    2015-01-01

    The availability of efficient hydrogen evolution reaction (HER) catalysts is of high importance for solar fuel technologies aimed at reducing future carbon emissions. Even though Pt electrodes are excellent HER electrocatalysts, commercialization of large-scale hydrogen production technology requires finding an equally efficient, low-cost, earth-abundant alternative. Here, high porosity, metal-organic framework (MOF) films have been used as scaffolds for the deposition of a Ni-S electrocatalyst. Compared with an MOF-free Ni-S, the resulting hybrid materials exhibit significantly enhanced performance for HER from aqueous acid, decreasing the kinetic overpotential by more than 200 mV at a benchmark current density of 10 mA cm−2. Although the initial aim was to improve electrocatalytic activity by greatly boosting the active area of the Ni-S catalyst, the performance enhancements instead were found to arise primarily from the ability of the proton-conductive MOF to favourably modify the immediate chemical environment of the sulfide-based catalyst. PMID:26365764

  13. Reusable oxidation catalysis using metal-monocatecholato species in a robust metal-organic framework.

    PubMed

    Fei, Honghan; Shin, JaeWook; Meng, Ying Shirley; Adelhardt, Mario; Sutter, Jörg; Meyer, Karsten; Cohen, Seth M

    2014-04-02

    An isolated metal-monocatecholato moiety has been achieved in a highly robust metal-organic framework (MOF) by two fundamentally different postsynthetic strategies: postsynthetic deprotection (PSD) and postsynthetic exchange (PSE). Compared with PSD, PSE proved to be a more facile and efficient functionalization approach to access MOFs that could not be directly synthesized under solvothermal conditions. Metalation of the catechol functionality residing in the MOFs resulted in unprecedented Fe-monocatecholato and Cr-monocatecholato species, which were characterized by X-ray absorption spectroscopy, X-band electron paramagnetic resonance spectroscopy, and (57)Fe Mössbauer spectroscopy. The resulting materials are among the first examples of Zr(IV)-based UiO MOFs (UiO = University of Oslo) with coordinatively unsaturated active metal centers. Importantly, the Cr-metalated MOFs are active and efficient catalysts for the oxidation of alcohols to ketones using a wide range of substrates. Catalysis could be achieved with very low metal loadings (0.5-1 mol %). Unlike zeolite-supported, Cr-exchange oxidation catalysts, the MOF-based catalysts reported here are completely recyclable and reusable, which may make them attractive catalysts for 'green' chemistry processes.

  14. Peptide-Metal Organic Framework Swimmers that Direct the Motion toward Chemical Targets.

    PubMed

    Ikezoe, Yasuhiro; Fang, Justin; Wasik, Tomasz L; Shi, Menglu; Uemura, Takashi; Kitagawa, Susumu; Matsui, Hiroshi

    2015-06-10

    Highly efficient and robust chemical motors are expected for the application in microbots that can selectively swim toward targets and accomplish their tasks in sensing, labeling, and delivering. However, one of major issues for such development is that current artificial swimmers have difficulty controlling their directional motion toward targets like bacterial chemotaxis. To program synthetic motors with sensing capability for the target-directed motion, we need to develop swimmers whose motions are sensitive to chemical gradients in environments. Here we create a new intelligent biochemical swimmer by integrating metal organic frameworks (MOFs) and peptides that can sense toxic heavy metals in solution and swim toward the targets. With the aid of Pb-binding enzymes, the peptide-MOF motor can directionally swim toward PbSe quantum dots (QD) by sensing pH gradient and eventually complete the motion as the swimmer reaches the highest gradient point at the target position in solution. This type of technology could be evolved to miniaturize chemical robotic systems that sense target chemicals and swim toward target locations.

  15. Optical metal-organic framework sensor for selective discrimination of some toxic metal ions in water.

    PubMed

    Shahat, Ahmed; Hassan, Hassan M A; Azzazy, Hassan M E

    2013-09-02

    This paper reports the development of a facile and effective approach, based on the use of Zr-based metal-organic frameworks (UiO-66) sensor with micropores geometry, shape and particle morphology for the visual detection and removal of ultra-traces of some toxic metal ions such as Bi(III), Zn(II), Pb(II), Hg(II) and Cd(II). UiO-66 was used as selective carriers for accommodating hydrophobic chromophore probes such as dithizone (DZ) without coupling agent for sensitive and selective discrimination of trace level of toxic analytes. The developed UiO-66 sensor was utilized for the detection of ultra-traces of some toxic metal ions with the naked eye. The new sensor displays high sensitivity and selectivity of a wide range of detectable metals analytes up to 10(-10) mol dm(-3) in solution, in a rapid analyte uptake response (seconds). The developed sensor is stable, cost effective, easy to prepare, and would be useful for rapid detection and removal of ultra-traces of toxic metal ions in water samples.

  16. Electrochemistry and electrochemiluminescence from a redox-active metal-organic framework.

    PubMed

    Xu, Yang; Yin, Xue-Bo; He, Xi-Wen; Zhang, Yu-Kui

    2015-06-15

    The marriage of metal-organic frameworks (MOFs) and electrochemiluminescence (ECL) can combine their merits together. Designing ECL-active MOF with a high electron transfer capacity and high stability is critical for ECL emission. Here we reported the ECL from a redox-active MOF prepared from {Ru[4,4'-(HO2C)2-bpy]2bpy}(2+) and Zn(2+); a property of MOFs has not been reported previously. The MOF structure is independent of its charge and is therefore stable electrochemically. The redox-activity and well-ordered porous structure of the MOF were confirmed by its electrochemical properties and ECL emission. The high ECL emission indicated the ease of electron transfer between the MOF and co-reactants. Furthermore, the MOF exhibited permselectivity, charge selectivity, and catalytic selectivity along with a stable and concentration-dependent ECL emission toward co-reactants. ECL mechanism was proposed based on the results. The detection and recovery of cocaine in the serum sample was used to validate the feasibility of MOF- based ECL system. The information obtained in this study provides a better understanding of the redox properties of MOFs and their potential electrochemical applications.

  17. Systematic and Dramatic Tuning on Gas Sorption Performance in Heterometallic Metal-Organic Frameworks.

    PubMed

    Zhai, Quan-Guo; Bu, Xianhui; Mao, Chengyu; Zhao, Xiang; Feng, Pingyun

    2016-03-02

    Despite their having much greater potential for compositional and structural diversity, heterometallic metal-organic frameworks (MOFs) reported so far have lagged far behind their homometallic counterparts in terms of CO2 uptake performance. Now the power of heterometallic MOFs is in full display, as shown by a series of new materials (denoted CPM-200s) with superior CO2 uptake capacity (up to 207.6 cm(3)/g at 273 K and 1 bar), close to the all-time record set by MOF-74-Mg. The isosteric heat of adsorption can also be tuned from -16.4 kJ/mol for CPM-200-Sc/Mg to -79.6 kJ/mol for CPM-200-V/Mg. The latter value is the highest reported for MOFs with Lewis acid sites. Some members of the CPM-200s family consist of combinations of metal ions (e.g., Mg/Ga, Mg/Fe, Mg/V, Mg/Sc) that have never been shown to coexist in any known crystalline porous materials. Such previously unseen combinations become reality through a cooperative crystallization process, which leads to the most intimate form of integration between even highly dissimilar metals, such as Mg(2+) and V(3+). The synergistic effects of heterometals bestow CPM-200s with the highest CO2 uptake capacity among known heterometallic MOFs and place them in striking distance of the all-time CO2 uptake record.

  18. A Series of Lanthanide Metal-Organic Frameworks with Interesting Adjustable Photoluminescence Constructed by Helical Chains.

    PubMed

    Liu, Ying; Zhang, Yu; Hu, Gong Hao; Zhou, Shuai; Fan, Ruiqing; Yang, Yulin; Xu, Yan

    2015-07-13

    Based on the isonicotinic acid (HIN=pyridine-4-carboxylic acid), seven lanthanide metal-organic frameworks (MOFs) with the formula [Ln(IN)2 L] (Ln=Eu (1), Tb (2), Er (3), Dy (4), Ho (5), Gd (6), La (7), L=OCH2 CH2 OH) have been synthesized by mixing Ln2 O3 with HIN under solvothermal conditions, and characterized by single-crystal X-ray diffraction, powder X-ray diffraction, infrared spectroscopy, and fluorescence spectroscopy. Crystal structural analysis shows that compounds 1-6 are isostructural, crystallize in a chiral space group P21 21 21 , whereas compound 7 crystallizes in space group C2/c. Nevertheless, they all consist of new intertwined chains. Simultaneously, on the basis of the above-mentioned compounds, we have realized a rational design strategy to form the doped Ln MOFs [(Eux Tb1-x )(IN)2 L] (x=0.35 (8), x=0.19 (9), x=0.06 (10)) by utilizing Tb(III) as the second "rare-earth metal". Interestingly, the photoluminescence of [(Eux Tb1-x )(IN)2 L] are not only adjustable by the ratios of Eu/Tb, but also temperature or excitation wavelength.

  19. Facile synthesis of glucoamylase embedded metal-organic frameworks (glucoamylase-MOF) with enhanced stability.

    PubMed

    Nadar, Shamraja S; Rathod, Virendra K

    2017-02-01

    The self-assembled glucoamylase metal-organic framework (glucoamylase-MOF) was synthesized by facile one-step method within 20min by simply mixing aqueous solution of 2-methylimidazole (160mM), glucoamylase (5mg/mL) and zinc acetate (40mM) at room temperature (28±2°C). The prepared glucoamylase-MOF was characterized by using FT-IR, confocal scanning laser microscopy, XRD and SEM. The robustness and thermal stability of glucoamylase embedded MOF was evaluated in terms of half-life (in the range of 60-80°C) which showed 6 folds increment as against free form. Further, in Michaelis-Menten kinetics studies, glucoamylase entrapped MOF exhibited higher Km value and lower Vmax value as compared to native enzyme. Moreover, the immobilized glucoamylase exhibited up to 57% of residual activity after six consecutive cycles of reuse, whereas it retained 91% of residual activity till 25days of storage. Finally, the conformational changes occurred after the encapsulation of glucoamylase in the interior of MOF, which was analyzed by using FT-IR data analysis tools.

  20. Structural and Dielectric Properties of Ionic Liquid Doped Metal Organic Framework based Polymer Electrolyte Nanocomposites

    NASA Astrophysics Data System (ADS)

    Dutta, Rituraj; Kumar, Ashok

    2016-10-01

    Metal Organic Frameworks (MOFs) are mesoporous materials that can be treated as potential hosts for trapping guest molecules in their pores. Ion conduction and phase behavior dynamics of Ionic Liquids (ILs) can be controlled by tunable interactions of MOFs with the ILs. MOFs incorporated with ionic liquid can be dispersed in the polymers to synthesize polymer electrolyte nanocomposites with high ionic conductivity, electrochemical and thermal stability for applications in energy storage and conversion devices such as rechargeable Li-ion batteries. In the present work we have synthesized Cu-based MOF [Cu3(l,3,5-benzene tricarboxylate)2(H2O)] incorporated with the ionic liquid 1-Butyl-3-methylimidazolium bromide at different weight ratios of MOF and IL. The synthesized MOF-IL composites are dispersed in Poly (ethylene oxide) (PEO). Frequency dependent behavior of permittivity and dielectric loss of the nanocomposites depict the non-Debye dielectric relaxation mechanism. The room temperature Nyquist plots reveal decreasing bulk resistance upto 189 Ω with optimum ionic conductivity of 1.3×10-3S cm-1at maximum doping concentration of IL in the nanocomposite system.

  1. Metal-organic framework-based separator for lithium-sulfur batteries

    NASA Astrophysics Data System (ADS)

    Bai, Songyan; Liu, Xizheng; Zhu, Kai; Wu, Shichao; Zhou, Haoshen

    2016-07-01

    Lithium-sulfur batteries are a promising energy-storage technology due to their relatively low cost and high theoretical energy density. However, one of their major technical problems is the shuttling of soluble polysulfides between electrodes, resulting in rapid capacity fading. Here, we present a metal-organic framework (MOF)-based battery separator to mitigate the shuttling problem. We show that the MOF-based separator acts as an ionic sieve in lithium-sulfur batteries, which selectively sieves Li+ ions while efficiently suppressing undesired polysulfides migrating to the anode side. When a sulfur-containing mesoporous carbon material (approximately 70 wt% sulfur content) is used as a cathode composite without elaborate synthesis or surface modification, a lithium-sulfur battery with a MOF-based separator exhibits a low capacity decay rate (0.019% per cycle over 1,500 cycles). Moreover, there is almost no capacity fading after the initial 100 cycles. Our approach demonstrates the potential for MOF-based materials as separators for energy-storage applications.

  2. Lanthanide near infrared imaging in living cells with Yb3+ nano metal organic frameworks.

    PubMed

    Foucault-Collet, Alexandra; Gogick, Kristy A; White, Kiley A; Villette, Sandrine; Pallier, Agnès; Collet, Guillaume; Kieda, Claudine; Li, Tao; Geib, Steven J; Rosi, Nathaniel L; Petoud, Stéphane

    2013-10-22

    We have created unique near-infrared (NIR)-emitting nanoscale metal-organic frameworks (nano-MOFs) incorporating a high density of Yb(3+) lanthanide cations and sensitizers derived from phenylene. We establish here that these nano-MOFs can be incorporated into living cells for NIR imaging. Specifically, we introduce bulk and nano-Yb-phenylenevinylenedicarboxylate-3 (nano-Yb-PVDC-3), a unique MOF based on a PVDC sensitizer-ligand and Yb(3+) NIR-emitting lanthanide cations. This material has been structurally characterized, its stability in various media has been assessed, and its luminescent properties have been studied. We demonstrate that it is stable in certain specific biological media, does not photobleach, and has an IC50 of 100 μg/mL, which is sufficient to allow live cell imaging. Confocal microscopy and inductively coupled plasma measurements reveal that nano-Yb-PVDC-3 can be internalized by cells with a cytoplasmic localization. Despite its relatively low quantum yield, nano-Yb-PVDC-3 emits a sufficient number of photons per unit volume to serve as a NIR-emitting reporter for imaging living HeLa and NIH 3T3 cells. NIR microscopy allows for highly efficient discrimination between the nano-MOF emission signal and the cellular autofluorescence arising from biological material. This work represents a demonstration of the possibility of using NIR lanthanide emission for biological imaging applications in living cells with single-photon excitation.

  3. Metal-organic framework nanosheets in polymer composite materials for gas separation

    PubMed Central

    Seoane, Beatriz; Miro, Hozanna; Corma, Avelino; Kapteijn, Freek; Llabrés i Xamena, Francesc X.; Gascon, Jorge

    2014-01-01

    Composites incorporating two-dimensional nanostructures within polymeric matrices hold potential as functional components for several technologies, including gas separation. Prospectively, employing metal-organic-frameworks (MOFs) as versatile nanofillers would notably broaden the scope of functionalities. However, synthesizing MOFs in the form of free standing nanosheets has proven challenging. We present a bottom-up synthesis strategy for dispersible copper 1,4-benzenedicarboxylate MOF lamellae of micrometer lateral dimensions and nanometer thickness. Incorporating MOF nanosheets into polymer matrices endows the resultant composites with outstanding CO2 separation performance from CO2/CH4 gas mixtures, together with an unusual and highly desired increment in the separation selectivity with pressure. As revealed by tomographic focused-ion-beam scanning-electron-microscopy, the unique separation behaviour stems from a superior occupation of the membrane cross-section by the MOF nanosheets as compared to isotropic crystals, which improves the efficiency of molecular discrimination and eliminates unselective permeation pathways. This approach opens the door to ultrathin MOF-polymer composites for various applications. PMID:25362353

  4. Adsorption, separation, and catalytic properties of densified metal-organic frameworks

    SciTech Connect

    Nandasiri, Manjula I.; Jambovane, Sachin R.; McGrail, B. Peter; Schaef, Herbert T.; Nune, Satish. K.

    2016-03-01

    Metal-organic frameworks (MOFs) are one of the widely investigated materials of 21st century due to their unique properties such as structural tailorability, controlled porosity and crystallinity. These exceptional properties make them promising candidates for various applications including gas adsorption and storage, separation, and catalysis. However, commercial applications of MOFs produced by conventional methods including solvothermal or hydrothermal synthesis are rather limited or restricted because they often produce fine powders. The use of MOF powders for industrial applications often results in pressure drop problems similar to the case with Zeolites. To realize these materials for practical applications, densification of MOFs is routinely employed to form pellets, extrudates or beads to improve the overall density, volumetric adsorption, mechanical and thermal properties. However, the improvements come with some drawbacks such as reduction in overall porosity, surface area, and gravimetric adsorption capacity. Thus, optimizing the properties of densified MOF’s by tuning the packing density is very crucial for realizing these materials for industrial applications. In this review, various methods of densification of MOFs, their properties, and applications are discussed.

  5. Light-harvesting and ultrafast energy migration in porphyrin-based metal-organic frameworks.

    PubMed

    Son, Ho-Jin; Jin, Shengye; Patwardhan, Sameer; Wezenberg, Sander J; Jeong, Nak Cheon; So, Monica; Wilmer, Christopher E; Sarjeant, Amy A; Schatz, George C; Snurr, Randall Q; Farha, Omar K; Wiederrecht, Gary P; Hupp, Joseph T

    2013-01-16

    Given that energy (exciton) migration in natural photosynthesis primarily occurs in highly ordered porphyrin-like pigments (chlorophylls), equally highly ordered porphyrin-based metal-organic frameworks (MOFs) might be expected to exhibit similar behavior, thereby facilitating antenna-like light-harvesting and positioning such materials for use in solar energy conversion schemes. Herein, we report the first example of directional, long-distance energy migration within a MOF. Two MOFs, namely F-MOF and DA-MOF that are composed of two Zn(II) porphyrin struts [5,15-dipyridyl-10,20-bis(pentafluorophenyl)porphinato]zinc(II) and [5,15-bis[4-(pyridyl)ethynyl]-10,20-diphenylporphinato]zinc(II), respectively, were investigated. From fluorescence quenching experiments and theoretical calculations, we find that the photogenerated exciton migrates over a net distance of up to ~45 porphyrin struts within its lifetime in DA-MOF (but only ~3 in F-MOF), with a high anisotropy along a specific direction. The remarkably efficient exciton migration in DA-MOF is attributed to enhanced π-conjugation through the addition of two acetylene moieties in the porphyrin molecule, which leads to greater Q-band absorption intensity and much faster exciton-hopping (energy transfer between adjacent porphyrin struts). The long distance and directional energy migration in DA-MOF suggests promising applications of this compound or related compounds in solar energy conversion schemes as an efficient light-harvesting and energy-transport component.

  6. Hydrogen adsorption in metal-organic frameworks: The role of nuclear quantum effects

    SciTech Connect

    Wahiduzzaman, Mohammad; Walther, Christian F. J.; Heine, Thomas

    2014-08-14

    The role of nuclear quantum effects on the adsorption of molecular hydrogen in metal-organic frameworks (MOFs) has been investigated on grounds of Grand-Canonical Quantized Liquid Density-Functional Theory (GC-QLDFT) calculations. For this purpose, we have carefully validated classical H{sub 2}-host interaction potentials that are obtained by fitting Born-Oppenheimer ab initio reference data. The hydrogen adsorption has first been assessed classically using Liquid Density-Functional Theory and the Grand-Canonical Monte Carlo methods. The results have been compared against the semi-classical treatment of quantum effects by applying the Feynman-Hibbs correction to the Born-Oppenheimer-derived potentials, and by explicit treatment within the GC-QLDFT. The results are compared with experimental data and indicate pronounced quantum and possibly many-particle effects. After validation calculations have been carried out for IRMOF-1 (MOF-5), GC-QLDFT is applied to study the adsorption of H{sub 2} in a series of MOFs, including IRMOF-4, -6, -8, -9, -10, -12, -14, -16, -18, and MOF-177. Finally, we discuss the evolution of the H{sub 2} quantum fluid with increasing pressure and lowering temperature.

  7. Electrically Driven White Light Emission from Intrinsic Metal-Organic Framework.

    PubMed

    Haider, Golam; Usman, Muhammad; Chen, Tzu-Pei; Perumal, Packiyaraj; Lu, Kuang-Lieh; Chen, Yang-Fang

    2016-09-27

    Light-emitting diodes (LEDs) have drawn tremendous potential as a replacement of traditional lighting due to its low-power consumption and longer lifetime. Nowadays, the practical white LEDs (WLED) are contingent on the photon down-conversion of phosphors containing rare-earth elements, which limits its utility, energy, and cost efficiency. In order to resolve the energy crisis and to address the environmental concerns, designing a direct WLED is highly desirable and remains a challenging issue. To circumvent the existing difficulties, in this report, we have designed and demonstrated a direct WLED consisting of a strontium-based metal-organic framework (MOF), {[Sr(ntca)(H2O)2]·H2O}n (1), graphene, and inorganic semiconductors, which can generate a bright white light emission. In addition to the suitable design of a MOF structure, the demonstration of electrically driven white light emission based on a MOF is made possible by the combination of several factors including the unique properties of graphene and the appropriate band alignment between the MOF and semiconductor layer. Because electroluminescence using a MOF as an active material is very rare and intriguing and a direct WLED is also not commonly seen, our work here therefore represents a major discovery which should be very useful and timely for the development of solid-state lighting.

  8. First-principles Hubbard U approach for small molecule binding in metal-organic frameworks

    NASA Astrophysics Data System (ADS)

    Mann, Gregory W.; Lee, Kyuho; Cococcioni, Matteo; Smit, Berend; Neaton, Jeffrey B.

    2016-05-01

    We apply first-principles approaches with Hubbard U corrections for calculation of small molecule binding energetics to open-shell transition metal atoms in metal-organic frameworks (MOFs). Using density functional theory with van der Waals dispersion-corrected functionals, we determine Hubbard U values ab initio through an established linear response procedure for M-MOF-74, for a number of different metal centers (M = Ti, V, Cr, Mn, Fe, Co, Ni, and Cu). While our ab initio U values differ from those used in previous work, we show that they result in lattice parameters and electronic contributions to CO2-MOF binding energies that lead to excellent agreement with experiments and previous results, yielding lattice parameters within 3%. In addition, U-dependent calculations for an example system, Co-MOF-74, suggest that the CO2 binding energy grows monotonically with the value of Hubbard U, with the binding energy shifting 4 kJ/mol (or 0.041 eV) over the range of U = 0-5.4 eV. These results provide insight into an approximate but computationally efficient means for calculation of small molecule binding energies to open-shell transition metal atoms in MOFs and suggest that the approach can be predictive with good accuracy, independent of the cations used and the availability of experimental data.

  9. Lewis Acid–Base Interactions between Polysulfides and Metal Organic Framework in Lithium Sulfur Batteries

    SciTech Connect

    Zheng, Jianming; Tian, Jian; Wu, Dangxin; Gu, Meng; Xu, Wu; Wang, Chongmin; Gao, Fei; Engelhard, Mark H.; Zhang, Ji-Guang; Liu, Jun; Xiao, Jie

    2014-05-14

    Lithium–sulfur (Li–S) battery is one of the most promising energy storage systems because of its high specific capacity of 1675 mAh g–1 based on sulfur. However, the rapid capacity degradation, mainly caused by polysulfide dissolution, remains a significant challenge prior to practical applications. This work demonstrates that a novel Ni-based metal organic framework (Ni-MOF), Ni6(BTB)4(BP)3 (BTB = benzene-1,3,5-tribenzoate and BP = 4,4'-bipyridyl), can remarkably immobilize polysulfides within the cathode structure through physical and chemical interactions at molecular level. The capacity retention achieves up to 89% after 100 cycles at 0.1 C. Finally, the excellent performance is attributed to the synergistic effects of the interwoven mesopores (~2.8 nm) and micropores (~1.4 nm) of Ni-MOF, which first provide an ideal matrix to confine polysulfides, and the strong interactions between Lewis acidic Ni(II) center and the polysulfide base, which significantly slow down the migration of soluble polysulfides out of the pores, leading to the excellent cycling performance of Ni-MOF/S composite.

  10. Lewis acid-base interactions between polysulfides and metal organic framework in lithium sulfur batteries.

    PubMed

    Zheng, Jianming; Tian, Jian; Wu, Dangxin; Gu, Meng; Xu, Wu; Wang, Chongmin; Gao, Fei; Engelhard, Mark H; Zhang, Ji-Guang; Liu, Jun; Xiao, Jie

    2014-05-14

    Lithium-sulfur (Li-S) battery is one of the most promising energy storage systems because of its high specific capacity of 1675 mAh g(-1) based on sulfur. However, the rapid capacity degradation, mainly caused by polysulfide dissolution, remains a significant challenge prior to practical applications. This work demonstrates that a novel Ni-based metal organic framework (Ni-MOF), Ni6(BTB)4(BP)3 (BTB = benzene-1,3,5-tribenzoate and BP = 4,4'-bipyridyl), can remarkably immobilize polysulfides within the cathode structure through physical and chemical interactions at molecular level. The capacity retention achieves up to 89% after 100 cycles at 0.1 C. The excellent performance is attributed to the synergistic effects of the interwoven mesopores (∼2.8 nm) and micropores (∼1.4 nm) of Ni-MOF, which first provide an ideal matrix to confine polysulfides, and the strong interactions between Lewis acidic Ni(II) center and the polysulfide base, which significantly slow down the migration of soluble polysulfides out of the pores, leading to the excellent cycling performance of Ni-MOF/S composite.

  11. Porous, rigid metal(III)-carboxylate metal-organic frameworks for the delivery of nitric oxide

    NASA Astrophysics Data System (ADS)

    Eubank, Jarrod F.; Wheatley, Paul S.; Lebars, Gaëlle; McKinlay, Alistair C.; Leclerc, Hervé; Horcajada, Patricia; Daturi, Marco; Vimont, Alexandre; Morris, Russell E.; Serre, Christian

    2014-12-01

    The room temperature sorption properties of the biological gas nitric oxide (NO) have been investigated on the highly porous and rigid iron or chromium carboxylate based metal-organic frameworks Material Institut Lavoisier (MIL)-100(Fe or Cr) and MIL-127(Fe). In all cases, a significant amount of NO is chemisorbed at 298 K with a loading capacity that depends both on the nature of the metal cation, the structure and the presence of additional iron(II) Lewis acid sites. In a second step, the release of NO triggered by wet nitrogen gas has been studied by chemiluminescence and indicates that only a partial release of NO occurs as well as a prolonged delivery at the biological level. Finally, an in situ infrared spectroscopy study confirms not only the coordination of NO over the Lewis acid sites and the stronger binding of NO on the additional iron(II) sites, providing further insights over the partial release of NO only in the presence of water at room temperature.

  12. Mathematical modeling and experimental breakthrough curves of carbon dioxide adsorption on metal organic framework CPM-5.

    PubMed

    Sabouni, Rana; Kazemian, Hossein; Rohani, Sohrab

    2013-08-20

    It is essential to capture carbon dioxide from flue gas because it is considered one of the main causes of global warming. Several materials and different methods have been reported for CO2 capturing including adsorption onto zeolites and porous membranes, as well as absorption in amine solutions. All such methods require high energy input and high cost. A new class of porous materials called Metal Organic Frameworks (MOFs) exhibited excellent performance in extracting carbon dioxide from a gas mixture. In this study, the breakthrough curves for the adsorption of carbon dioxide on CPM-5 (crystalline porous materials) were obtained experimentally and theoretically using a laboratory-scale fixed-bed column at different experimental conditions such as feed flow rate, adsorption temperature, and feed concentration. It was found that the CPM-5 has a dynamic CO2 adsorption capacity of 11.9 wt % (2.7 mmol/g) (corresponding to 8 mL/min, 298 K, and 25% v/v CO2). The tested CPM-5 showed an outstanding adsorption equilibrium capacity (e.g., 2.3 mmol/g (10.2 wt %) at 298 K) compared to other adsorbents, which can be considered as an attractive adsorbent for separation of CO2 from flue gas.

  13. Kinetic separation of carbon dioxide and methane on a copper metal-organic framework.

    PubMed

    Bao, Zongbi; Alnemrat, Sufian; Yu, Liang; Vasiliev, Igor; Ren, Qilong; Lu, Xiuyang; Deng, Shuguang

    2011-05-15

    Separation of carbon dioxide and methane is an important issue in upgrading low-quality natural gas. Adsorption equilibria and kinetics of CO(2) and CH(4) on a copper metal-organic framework (MOF), Cu(hfipbb)(H(2)hfipbb)(0.5) [H(2)hfipbb=4,4'-(hexafluoroisopropylidene) bis(benzoic acid)], were investigated to evaluate the feasibility of removing CO(2) from CH(4) in a pressure swing adsorption process using this new MOF adsorbent. The heat of adsorption of CO(2) on the Cu-MOF at zero-coverage (29.7 kJ/mol) is much lower than those on a carbon molecular sieve and a zeolite 5A adsorbent; and the heat of adsorption of CH(4) on the Cu-MOF (21.4 kJ/mol) is similar to that on the zeolite 5A adsorbent and smaller than that on a carbon molecular sieve. The Cu-MOF being investigated has apertures of (~3.5 × 3.5 Å), which favors the kinetically controlled separation of CO(2) and CH(4). The kinetic selectivity is found to be 26 at 298 K, and the overall selectivity (combining the equilibrium and kinetic effects) is about 25 for an adsorption separation process. These results suggest that the Cu-MOF adsorbent is an attractive alternative adsorbent for the CO(2)/CH(4) separation.

  14. Synthesis of nanoporous carbohydrate metal-organic framework and encapsulation of acetaldehyde

    NASA Astrophysics Data System (ADS)

    Al-Ghamdi, Saleh; Kathuria, Ajay; Abiad, Mohamad; Auras, Rafael

    2016-10-01

    Gamma cyclodextrin (γ-CD) metal organic frameworks (CDMOFs) were synthesized by coordinating γ-CDs with potassium hydroxide (KOH), referred hereafter as CDMOF-a, and potassium benzoate (C7H5KO2), denoted as CDMOF-b. The obtained CDMOF structures were characterized using nitrogen sorption isotherm, thermo-gravimetric analysis (TGA), X-ray diffraction (XRD), and scanning electron microscopy (SEM). High surface areas were achieved by the γ-CD based MOF structures where the Langmuir specific surface areas (SSA) of CDMOF-a and CDMOF-b were determined as 1376 m2 g-1 and 607 m2 g-1; respectively. The dehydrated CDMOF structures demonstrated good thermal stability up to 250 °C as observed by the TGA studies. XRD results for CDMOF-a and CDMOF-b reveal a body centered-cubic (BCC) and trigonal crystal system; respectively. Due to its accessible porous structure and high surface area, acetaldehyde was successfully encapsulated in CDMOF-b. During the release kinetic studies, we observed peak release of 53 μg of acetaldehyde per g of CDMOF-b, which was 100 times greater than previously reported encapsulation in β-CD. However, aldol condensation reaction occurred during encapsulation of acetaldehyde into CDMOF-a. This research work demonstrates the potential to encapsulate volatile organic compounds in CDMOF-b, and their associated release for applications including food, pharmaceuticals and packaging.

  15. Covalent bonding of homochiral metal-organic framework in capillaries for stereoisomer separation by capillary electrochromatography.

    PubMed

    Ma, Jichao; Ye, Nengsheng; Li, Jian

    2016-02-01

    In this work, a [Cu(mal)(bpy)]⋅H2O (mal, L-(-)-malic acid; bpy, 4,4'-bipyridyl) homochiral metal-organic frameworks (MOFs) was synthesized and used for modifying the inner walls of capillary columns by utilizing amido bonds to form covalent links between the MOFs particles and capillary inner wall. The synthesized [Cu(mal)(bpy)]⋅H2 O and MOFs-modified capillary column were characterized by X-ray diffraction, thermogravimetric analysis, particle size distribution analysis, nitrogen absorption characterization, FTIR spectroscopy, SEM, and energy-dispersive X-ray spectroscopy (EDX). The MOFs-modified capillary column was used for the stereoisomer separation of some drugs. The LODs and LOQs of six analytes were 0.1 and 0.25 μg/mL, respectively. The linear range was 0.25-250 μg/mL for ephedrine, 0.25-250 μg/mL for pseudoephedrine, 0.25-180 μg/mL for D-penicillamine, 0.25-120 μg/mL for L-penicillamine, 0.25-180 μg/mL for D-phenylalanine, and 0.25-160 μg/mL for L-phenylalanine, all with R(2) > 0.999. Finally, the MOFs-modified capillary column was applied for the analysis of active ingredients in a real sample of the traditional Chinese medicine ephedra.

  16. A porous proton-relaying metal-organic framework material that accelerates electrochemical hydrogen evolution

    SciTech Connect

    Hod, Idan; Deria, Pravas; Bury, Wojciech; Mondloch, Joseph E.; Kung, Chung-Wei; So, Monica; Sampson, Matthew D.; Peters, Aaron W.; Kubiak, Cliff P.; Farha, Omar K.; Hupp, Joseph T.

    2015-09-14

    The availability of efficient hydrogen evolution reaction (HER) catalysts is of high importance for solar fuel technologies aimed at reducing future carbon emissions. Even though Pt electrodes are excellent HER electrocatalysts, commercialization of large-scale hydrogen production technology requires finding an equally efficient, low-cost, earth-abundant alternative. Here, high porosity, metal-organic framework (MOF) films have been used as scaffolds for the deposition of a Ni-S electrocatalyst. Compared with an MOF-free Ni-S, the resulting hybrid materials exhibit significantly enhanced performance for HER from aqueous acid, decreasing the kinetic overpotential by more than 200 mV at a benchmark current density of 10 mA cm−2. In conclusion, although the initial aim was to improve electrocatalytic activity by greatly boosting the active area of the Ni-S catalyst, the performance enhancements instead were found to arise primarily from the ability of the proton-conductive MOF to favourably modify the immediate chemical environment of the sulfide-based catalyst.

  17. A porous proton-relaying metal-organic framework material that accelerates electrochemical hydrogen evolution

    DOE PAGES

    Hod, Idan; Deria, Pravas; Bury, Wojciech; ...

    2015-09-14

    The availability of efficient hydrogen evolution reaction (HER) catalysts is of high importance for solar fuel technologies aimed at reducing future carbon emissions. Even though Pt electrodes are excellent HER electrocatalysts, commercialization of large-scale hydrogen production technology requires finding an equally efficient, low-cost, earth-abundant alternative. Here, high porosity, metal-organic framework (MOF) films have been used as scaffolds for the deposition of a Ni-S electrocatalyst. Compared with an MOF-free Ni-S, the resulting hybrid materials exhibit significantly enhanced performance for HER from aqueous acid, decreasing the kinetic overpotential by more than 200 mV at a benchmark current density of 10 mA cm−2. In conclusion, althoughmore » the initial aim was to improve electrocatalytic activity by greatly boosting the active area of the Ni-S catalyst, the performance enhancements instead were found to arise primarily from the ability of the proton-conductive MOF to favourably modify the immediate chemical environment of the sulfide-based catalyst.« less

  18. Formation of a new archetypal Metal-Organic Framework from a simple monatomic liquid

    SciTech Connect

    Metere, Alfredo Oleynikov, Peter; Dzugutov, Mikhail; O’Keeffe, Michael

    2014-12-21

    We report a molecular-dynamics simulation of a single-component system of particles interacting via a spherically symmetric potential that is found to form, upon cooling from a liquid state, a low-density porous crystalline phase. Its structure analysis demonstrates that the crystal can be described by a net with a topology that belongs to the class of topologies characteristic of the Metal-Organic Frameworks (MOFs). The observed net is new, and it is now included in the Reticular Chemistry Structure Resource database. The observation that a net topology characteristic of MOF crystals, which are known to be formed by a coordination-driven self-assembly process, can be reproduced by a thermodynamically stable configuration of a simple single-component system of particles opens a possibility of using these models in studies of MOF nets. It also indicates that structures with MOF topology, as well as other low-density porous crystalline structures can possibly be produced in colloidal systems of spherical particles, with an appropriate tuning of interparticle interaction.

  19. Mechanical downsizing of a gadolinium(III)-based metal-organic framework for anticancer drug delivery.

    PubMed

    Kundu, Tanay; Mitra, Shouvik; Patra, Prasun; Goswami, Arunava; Díaz Díaz, David; Banerjee, Rahul

    2014-08-11

    A Gd(III) -based porous metal-organic framework (MOF), Gd-pDBI, has been synthesized using fluorescent linker pDBI (pDBI=(1,4-bis(5-carboxy-1H-benzimidazole-2-yl)benzene)), resulting in a three-dimensional interpenetrated structure with a one-dimensional open channel (1.9×1.2 nm) filled with hydrogen-bonded water assemblies. Gd-pDBI exhibits high thermal stability, porosity, excellent water stability, along with organic-solvent and mild acid and base stability with retention of crystallinity. Gd-pDBI was transformed to the nanoscale regime (ca. 140 nm) by mechanical grinding to yield MG-Gd-pDBI with excellent water dispersibility (>90 min), maintaining its porosity and crystallinity. In vitro and in vivo studies on MG-Gd-pDBI revealed its low blood toxicity and highest drug loading (12 wt %) of anticancer drug doxorubicin in MOFs reported to date with pH-responsive cancer-cell-specific drug release.

  20. CO2 Capture in Dry and Wet Conditions in UTSA-16 Metal-Organic Framework.

    PubMed

    Masala, Alessio; Vitillo, Jenny G; Mondino, Giorgia; Grande, Carlos A; Blom, Richard; Manzoli, Maela; Marshall, Marc; Bordiga, Silvia

    2017-01-11

    Water is the strongest competitor to CO2 in the adsorption on microporous materials, affecting their performances as CO2 scrubbers in processes such as postcombustion carbon capture. The metal-organic framework (MOF) UTSA-16 is considered a promising material for its capacity to efficiently capture CO2 in large quantities, thanks to the presence of open metal sites (OMSs). It is here shown that UTSA-16 is also able to desorb fully water already at room temperature. This property is unique from all the other materials with OMSs reported so far. UTSA-16 retains indeed the 70% of its CO2 separation capacity after admittance of water in a test flow, created to simulate the emissions from a real postcombustion carbon-capture process. This important aspect not yet observed for any other amine-free material, associated with a high material stability-tested for 160 cycles-and a small temperature swing necessary for regeneration, places UTSA-16 in the restrict number of systems with a real technological future for CO2 separation.