Science.gov

Sample records for 3d qsar pharmacophore

  1. Pharmacophore modeling, comprehensive 3D-QSAR, and binding mode analysis of TGR5 agonists.

    PubMed

    Sindhu, Thangaraj; Srinivasan, Pappu

    2017-04-01

    Takeda G-protein-coupled receptor 5 (TGR5) is emerging as an important and promising target for the development of anti-diabetic drugs. Pharmacophore modeling and atom-based 3D-QSAR studies were carried out on a new series of 5-phenoxy-1,3-dimethyl-1H-pyrazole-4-carboxamides as highly potent agonists of TGR5. The generated best six featured pharmacophore model AAHHRR consists of two hydrogen bond acceptors (A): two hydrophobic groups (H) and two aromatic rings (R). The constructed 3D-QSAR model acquired excellent correlation coefficient value (R(2 )=( )0.9018), exhibited good predictive power (Q(2 )=( )0.8494) and high Fisher ratio (F = 61.2). The pharmacophore model was validated through Guner-Henry (GH) scoring method. The GH value of 0.5743 indicated that the AAHHRR model was statistically valuable and reliable in the identification of TGR5 agonists. Furthermore, the combined approach of molecular docking and binding free energy calculations were carried out for the 5-phenoxy-1,3-dimethyl-1H-pyrazole-4-carboxamides to explore the binding mode and interaction pattern. The generated contour maps revealed the important structural insights for the activity of the compounds. The results obtained from this study could be helpful in the development of novel and more potent agonists of TGR5.

  2. 3D QSAR studies, pharmacophore modeling and virtual screening on a series of steroidal aromatase inhibitors.

    PubMed

    Xie, Huiding; Qiu, Kaixiong; Xie, Xiaoguang

    2014-11-14

    Aromatase inhibitors are the most important targets in treatment of estrogen-dependent cancers. In order to search for potent steroidal aromatase inhibitors (SAIs) with lower side effects and overcome cellular resistance, comparative molecular field analysis (CoMFA) and comparative molecular similarity indices analysis (CoMSIA) were performed on a series of SAIs to build 3D QSAR models. The reliable and predictive CoMFA and CoMSIA models were obtained with statistical results (CoMFA: q² = 0.636, r²(ncv) = 0.988, r²(pred) = 0.658; CoMSIA: q² = 0.843, r²(ncv) = 0.989, r²(pred) = 0.601). This 3D QSAR approach provides significant insights that can be used to develop novel and potent SAIs. In addition, Genetic algorithm with linear assignment of hypermolecular alignment of database (GALAHAD) was used to derive 3D pharmacophore models. The selected pharmacophore model contains two acceptor atoms and four hydrophobic centers, which was used as a 3D query for virtual screening against NCI2000 database. Six hit compounds were obtained and their biological activities were further predicted by the CoMFA and CoMSIA models, which are expected to design potent and novel SAIs.

  3. Combinatorial Pharmacophore-Based 3D-QSAR Analysis and Virtual Screening of FGFR1 Inhibitors

    PubMed Central

    Zhou, Nannan; Xu, Yuan; Liu, Xian; Wang, Yulan; Peng, Jianlong; Luo, Xiaomin; Zheng, Mingyue; Chen, Kaixian; Jiang, Hualiang

    2015-01-01

    The fibroblast growth factor/fibroblast growth factor receptor (FGF/FGFR) signaling pathway plays crucial roles in cell proliferation, angiogenesis, migration, and survival. Aberration in FGFRs correlates with several malignancies and disorders. FGFRs have proved to be attractive targets for therapeutic intervention in cancer, and it is of high interest to find FGFR inhibitors with novel scaffolds. In this study, a combinatorial three-dimensional quantitative structure-activity relationship (3D-QSAR) model was developed based on previously reported FGFR1 inhibitors with diverse structural skeletons. This model was evaluated for its prediction performance on a diverse test set containing 232 FGFR inhibitors, and it yielded a SD value of 0.75 pIC50 units from measured inhibition affinities and a Pearson’s correlation coefficient R2 of 0.53. This result suggests that the combinatorial 3D-QSAR model could be used to search for new FGFR1 hit structures and predict their potential activity. To further evaluate the performance of the model, a decoy set validation was used to measure the efficiency of the model by calculating EF (enrichment factor). Based on the combinatorial pharmacophore model, a virtual screening against SPECS database was performed. Nineteen novel active compounds were successfully identified, which provide new chemical starting points for further structural optimization of FGFR1 inhibitors. PMID:26110383

  4. Pharmacophore modeling, 3D-QSAR and docking study of 2-phenylpyrimidine analogues as selective PDE4B inhibitors.

    PubMed

    Tripuraneni, Naga Srinivas; Azam, Mohammed Afzal

    2016-04-07

    Pharmacophore modeling, molecular docking, and molecular dynamics (MD) simulation studies have been performed, to explore the putative binding modes of 2-phenylpyrimidine series as PDE4B selective inhibitors. A five point pharmacophore model was developed using 87 molecules having pIC50 ranging from 8.52 to 5.07. The pharmacophore hypothesis yielded a statistically significant 3D-QSAR model, with a high correlation coefficient (R(2)=0.918), cross validation coefficient (Q(2)=0.852), and F value (175) at 4 component PLS factor. The external validation indicated that our QSAR model possessed high predictive power (R(2)=0.70). The generated model was further validated by enrichment studies using the decoy test. To evaluate the effectiveness of docking protocol in flexible docking, we have selected crystallographic bound compound to validate our docking procedure as evident from root mean square deviation. A 10ns molecular dynamics simulation confirmed the docking results of both stability of the 1XMU-ligand complex and the presumed active conformation. Further, similar orientation was observed between the superposition of the conformations of 85 after MD simulation and best XP-docking pose; MD simulation and 3D-QSAR pose; best XP-docking and 3D-QSAR poses. Outcomes of the present study provide insight in designing novel molecules with better PDE4B selective inhibitory activity.

  5. A Combined Pharmacophore Modeling, 3D QSAR and Virtual Screening Studies on Imidazopyridines as B-Raf Inhibitors.

    PubMed

    Xie, Huiding; Chen, Lijun; Zhang, Jianqiang; Xie, Xiaoguang; Qiu, Kaixiong; Fu, Jijun

    2015-05-29

    B-Raf kinase is an important target in treatment of cancers. In order to design and find potent B-Raf inhibitors (BRIs), 3D pharmacophore models were created using the Genetic Algorithm with Linear Assignment of Hypermolecular Alignment of Database (GALAHAD). The best pharmacophore model obtained which was used in effective alignment of the data set contains two acceptor atoms, three donor atoms and three hydrophobes. In succession, comparative molecular field analysis (CoMFA) and comparative molecular similarity indices analysis (CoMSIA) were performed on 39 imidazopyridine BRIs to build three dimensional quantitative structure-activity relationship (3D QSAR) models based on both pharmacophore and docking alignments. The CoMSIA model based on the pharmacophore alignment shows the best result (q(2) = 0.621, r(2)(pred) = 0.885). This 3D QSAR approach provides significant insights that are useful for designing potent BRIs. In addition, the obtained best pharmacophore model was used for virtual screening against the NCI2000 database. The hit compounds were further filtered with molecular docking, and their biological activities were predicted using the CoMSIA model, and three potential BRIs with new skeletons were obtained.

  6. Structural insights of JAK2 inhibitors: pharmacophore modeling and ligand-based 3D-QSAR studies of pyrido-indole derivatives.

    PubMed

    Gade, Deepak Reddy; Kunala, Pavan; Raavi, Divya; Reddy, Pavan Kumar K; Prasad, Rajendra V V S

    2015-04-01

    In this study we have performed pharmacophore modeling and built a 3D QSAR model for pyrido-indole derivatives as Janus Kinase 2 inhibitors. An efficient pharmacophore has been identified from a data set of 51 molecules and the identified pharmacophore hypothesis consisted of one hydrogen bond acceptor, two hydrogen bond donors and three aromatic rings, i.e. ADDRRR. A powerful 3D-QSAR model has also been constructed by employing Partial Least Square regression analysis with a regression coefficient of 0.97 (R(2)) and Q(2) of 0.95, and Pearson-R of 0.98.

  7. Azolium analogues as CDK4 inhibitors: Pharmacophore modeling, 3D QSAR study and new lead drug discovery

    NASA Astrophysics Data System (ADS)

    Rondla, Rohini; Padma Rao, Lavanya Souda; Ramatenki, Vishwanath; Vadija, Rajender; Mukkera, Thirupathi; Potlapally, Sarita Rajender; Vuruputuri, Uma

    2017-04-01

    The cyclin-dependent kinase 4 (CDK4) enzyme is a key regulator in cell cycle G1 phase progression. It is often overexpressed in variety of cancer cells, which makes it an attractive therapeutic target for cancer treatment. A number of chemical scaffolds have been reported as CDK4 inhibitors in the literature, and in particular azolium scaffolds as potential inhibitors. Here, a ligand based pharmacophore modeling and an atom based 3D-QSAR analyses for a series of azolium based CDK4 inhibitors are presented. A five point pharmacophore hypothesis, i.e. APRRR with one H-bond acceptor (A), one positive cationic feature (P) and three ring aromatic sites (R) is developed, which yielded an atom based 3D-QSAR model that shows an excellent correlation coefficient value- R2 = 0.93, fisher ratio- F = 207, along with good predictive ability- Q2 = 0.79, and Pearson R value = 0.89. The visual inspection of the 3D-QSAR model, with the most active and the least active ligands, demonstrates the favorable and unfavorable structural regions for the activity towards CDK4. The roles of positively charged nitrogen, the steric effect, ligand flexibility, and the substituents on the activity are in good agreement with the previously reported experimental results. The generated 3D QSAR model is further applied as query for a 3D database screening, which identifies 23 lead drug candidates with good predicted activities and diverse scaffolds. The ADME analysis reveals that, the pharmacokinetic parameters of all the identified new leads are within the acceptable range.

  8. Pharmacophore modeling, 3D-QSAR and molecular docking studies of benzimidazole derivatives as potential FXR agonists.

    PubMed

    Sindhu, Thangaraj; Srinivasan, Pappu

    2014-08-01

    Farnesoid X receptor (FXR) is a potential therapeutic target for the treatment of diabetes mellitus. Atom-based three-dimensional quantitative structure activity relationship (3D-QSAR) models were developed for a series of 48 benzimidazole-based agonists of FXR. A total of five pharmacophore hypotheses were generated based on the survival score to build QSAR models. HHHRR was considered as a best model that consisted of three hydrophobic features (H) and two aromatic rings (R). The best hypothesis, HHHRR yielded a 3D-QSAR model with good statistical value (R(2)) of 0.8974 for a training set of 39 compounds and also showed good predictive power with correlation coefficient (Q(2)) of 0.7559 for a test set of nine compounds. Furthermore, molecular docking simulation was performed to understand the binding affinity of 48 benzimidazole-based compounds against the active site of human FXR protein. Docking results revealed that both the most active and least active compounds showed similar binding mode to the experimentally observed binding mode of co-crystallized ligand. The generated 3D contour maps revealed the structure activity relationship of the compounds. Substitution effects at different positions of benzimidazole derivatives would lead to the discovery of new agonists against human FXR protein.

  9. Generation of pharmacophore and atom based 3D-QSAR model of novel isoquinolin-1-one and quinazolin-4-one-type inhibitors of TNFα.

    PubMed

    Hanumanthappa, Pradeep; Teli, Mahesh K; Krishnamurthy, Rajanikant G

    2012-05-01

    In the present report, 3D-QSAR analysis was executed on the previously synthesized and evaluated derivatives of isoquinolin-1-ones and quinazolin-4-ones; potent inhibitors of tumor necrosis factor α (TNFα). Statistically significant 3D-QSAR models were generated using 42 molecules in the training set. The predictive ability of models was determined using a randomly chosen test set of 16 molecules, which gave excellent predictive correlation coefficients for 3-D models, suggesting good predictive index. Pharmacophore prediction generated a five point pharmacophore (AAHRR): two hydrogen bond acceptor (A), one hydrophobic (H) and two ring (RR) features. This pharmacophore hypothesis furnished a statistically meaningful 3D-QSAR model with partial least-square (PLS) factors seven having R2=0.9965, Q2=0.6185, Root Mean Squared Error=0.4284 and Pearson-R=0.853. Docking study revealed the important amino acid residues (His 15, Tyr 59, Tyr 151, Gly 121 and Gly 122) in the active site of TNFα that are involved in binding of the active ligand. Orientation of the pharmacophore hypothesis AAHRR.25 corresponded very closely with the binding mode recorded in the active site of ligand bound complex. The results of ligand based pharmacophore hypothesis and atom based 3D-QSAR furnished crucial structural insights and also highlighted the important binding features of isoquinolin-1-ones and quinazolin-4-ones derivatives, which may provide guidance for the rational design of novel and more potent TNFα inhibitors.

  10. Validation of TZD Scaffold as Potential ARIs: Pharmacophore Modelling, Atom-based 3D QSAR and Docking Studies.

    PubMed

    Dahiya, Lalita; Mahapatra, Manoj Kumar; Kaur, Ramandeep; Kumar, Vipin; Kumar, Manoj

    2017-03-15

    Metabolic disorders associated with diabetic patients are a serious concern. Aldose reductase (ALR2) has been identified as first rate-limiting enzyme in the polyol pathway which catalyzes the reduction of glucose to sorbitol. It represents one of the validated targets to develop potential new chemical entities for the prevention and subsequent progression of microvascular diabetic complications. In order to further understand the intricate structural prerequisites of molecules to act as ALR2 inhibitors, ligand-based pharmacophore model, atom-based 3D-QSAR and structure based drug design studies have been performed on a series of 2,4-thiazolidinedione derivatives with ALR2 inhibitory activity. In the present study, a validated six point pharmacophore model (AAADNR) with three hydrogen bond acceptor (A), one hydrogen bond donor (D), one negative ionic group (N) and one aromatic ring (R) was developed using PHASE module of Schrodinger suite with acceptable PLS statistics (survival score = 3.871, cross-validated correlation coefficient Q2 = 0.6902, correlation coefficient of multiple determination r2 = 0.9019, Pearson-R coefficient = 0.8354 and F distribution = 196.2). In silico predictive studies (pharmacophore modeling, atom-based 3D QSAR and docking combined with drug receptor binding free energetics and pharmacokinetic drug profile) highlighted some of the important structural features of thiazolidinedione analogues required for potential ALR2 inhibitory activity. The result of these studies may account to design a legitimate template for rational drug design of novel, potent and promising ALR2 inhibitors.

  11. Pharmacophore modeling and atom-based 3D-QSAR studies on amino derivatives of indole as potent isoprenylcysteine carboxyl methyltransferase (Icmt) inhibitors

    NASA Astrophysics Data System (ADS)

    Bhadoriya, Kamlendra Singh; Sharma, Mukesh C.; Jain, Shailesh V.

    2015-02-01

    Icmt enzymes are of particular importance in the post-translational modification of proteins that are involved in the regulation of cell growth. Thus, effective Icmt inhibitors may be of significant therapeutic importance in oncogenesis. To determine the structural requirements responsible for high affinity of previously reported amino derivatives of indole as Icmt inhibitors, a successful pharmacophore generation and atom-based 3D-QSAR analysis have been carried out. The best four-point pharmacophore model with four features HHRR: two hydrophobic groups (H) and two aromatic rings (R) as pharmacophore features was developed by PHASE module of Schrodinger suite. In this study, highly predictive 3D-QSAR models have been developed for Icmt inhibition using HHRR.191 hypothesis. The pharmacophore hypothesis yielded a 3D-QSAR model with good partial least-square (PLS) statistics results. The validation of the PHASE model was done by dividing the dataset into training and test set. The statistically significant the four-point pharmacophore hypothesis yielded a 3D-QSAR model with good PLS statistics results (R2 = 0.9387, Q2 = 0.8132, F = 114.8, SD = 0.1567, RMSE = 0.2682, Pearson-R = 0.9147). The generated model showed excellent predictive power, with a correlation coefficient of Q2 = 0.8132. The results of ligand-based pharmacophore hypothesis and atom-based 3D-QSAR provide detailed structural insights as well as highlights important binding features of novel amino derivatives of indole as Icmt inhibitors which can afford guidance for the rational drug design of novel, potent and promising Icmt inhibitors with enhanced potencies and may prove helpful for further lead optimization and virtual screening.

  12. Pharmacophore modelling and atom-based 3D-QSAR studies on N-methyl pyrimidones as HIV-1 integrase inhibitors.

    PubMed

    Reddy, Karnati Konda; Singh, Sanjeev Kumar; Dessalew, Nigus; Tripathi, Sunil Kumar; Selvaraj, Chandrabose

    2012-06-01

    Pharmacophore modelling and atom-based 3D-QSAR studies were carried out for a series of compounds belonging to N-methyl pyrimidones as HIV-1 integrase inhibitors. Based on the ligand-based pharmacophore model, we got 5-point pharmacophore model AADDR, with two hydrogen bond acceptors (A), two hydrogen bond donors (D) and one aromatic ring (R). The generated pharmacophore-based alignment was used to derive a predictive atom-based 3D-QSAR model for the training set (r(2) = 0.92, SD = 0.16, F = 84.8, N = 40) and for test set (Q(2) = 0.71, RMSE = 0.06, Pearson R = 0.90, N = 10). From these results, AADDR pharmacophore feature was selected as best common pharmacophore hypothesis, and atom-based 3D-QSAR results also support the outcome by means of favourable and unfavourable regions of hydrophobic and electron-withdrawing groups for the most potent compound 30. These results can be useful for further design of new and potent HIV-1 IN inhibitors.

  13. Optimization, pharmacophore modeling and 3D-QSAR studies of sipholanes as breast cancer migration and proliferation inhibitors.

    PubMed

    Foudah, Ahmed I; Sallam, Asmaa A; Akl, Mohamed R; El Sayed, Khalid A

    2014-02-12

    Sipholenol A, a triterpene isolated from the Red Sea sponge Callyspongia siphonella, was previously shown to reverse multidrug resistance in P-glycoprotein-overexpressing cancer cells. Moreover, sipholanes showed promising in vitro inhibitory effects against the invasion and migration of the metastatic human breast cancer cell line MDA-MB-231. The breast tumor kinase (Brk), a mediator of cancer cell phenotypes important for proliferation, survival, and migration, was proposed as a potential target. This study reports additional semisynthetic optimization of sipholenol A esters to improve the breast cancer antimigratory and antiproliferative activities as well as Brk phosphorylation inhibition. Fifteen new sipholenol A analogs (25-39) were semisynthesized. Sipholenol A 4β-4',5'-dichlorobenzoate ester (29) was the most potent, with an IC50 value of 1.3 μM in the migration assay. The level of Brk phosphorylation inhibition of 29 was assessed using the Z'-LYTE™ kinase assay and Western blot analysis. Active analogs showed no toxicity on the non-tumorigenic epithelial breast cell line MCF10A at doses equal to their IC50 values or higher in migration and proliferation assays, suggesting their selectivity towards malignant cells. Pharmacophore modeling and 3D-QSAR studies were conducted to identify important pharmacophoric features and correlate 3D-chemical structure with activity. These studies provided the evidence for future design of novel antimigratory compounds based on a simplified sipholane structure possessing rings A and B (perhydrobenzoxepine) connected to substituted aromatic esters, with the elimination of rings C and D ([5,3,0]bicyclodecane system). This will enable the future synthesis of the new active entities feasibly and cost-effectively. These results demonstrate the potential of marine natural products for the discovery of novel scaffolds for the control and management of metastatic breast cancer.

  14. Pharmacophore modeling, 3D-QSAR, and in silico ADME prediction of N-pyridyl and pyrimidine benzamides as potent antiepileptic agents.

    PubMed

    Malik, Ruchi; Mehta, Pakhuri; Srivastava, Shubham; Choudhary, Bhanwar Singh; Sharma, Manish

    2016-09-08

    Biological mechanism attributing mutations in KCNQ2/Q3 results in benign familial neonatal epilepsy (BFNE), a rare form of epilepsy and thus neglected. It offers a potential target for antiepileptic drug discovery. In the present work, a pharmacophore-based 3D-QSAR model was generated for a series of N-pyridyl and pyrimidine benzamides possessing KCNQ2/Q3 opening activity. The pharmacophore model generated contains one hydrogen bond donor (D), one hydrophobic (H), and two aromatic rings (R). They are the crucial molecular write-up detailing predicted binding efficacy of high affinity and low affinity ligands for KCNQ2/Q3 opening activity. Furthermore, it has been validated by using a biological correlation between pharmacophore hypothesis-based 3D-QSAR variables and functional fingerprints of openers responsible for the receptor binding and also by docking of these benzamides into the validated homology model. Excellent statistical computational tools of QSAR model such as good correlation coefficient (R(2 )>( )0.80), higher F value (F > 39), and excellent predictive power (Q(2) > 0.7) with low standard deviation (SD <0.3) strongly suggest that the developed model could be used for prediction of antiepileptic activity of newer analogs. A preliminary pharmacokinetic profile of these derivatives was also performed on the basis of QikProp predictions.

  15. Pharmacophore generation and atom-based 3D-QSAR of novel quinoline-3-carbonitrile derivatives as Tpl2 kinase inhibitors.

    PubMed

    Teli, Mahesh Kumar; Rajanikant, G K

    2012-08-01

    Tumour progression locus-2 (Tpl2) is a serine/threonine kinase, which regulates the expression of tumour necrosis factor α. The article describes the development of a robust pharmacophore model and the investigation of structure-activity relationship analysis of quinoline-3-carbonitrile derivatives reported for Tpl2 kinase inhibition. A five point pharmacophore model (ADRRR) was developed and used to derive a predictive atom-based 3-dimensional quantitative structure activity relationship (3D-QSAR) model. The obtained 3D-QSAR model has an excellent correlation coefficient value (r(2)= 0.96), Fisher ratio (F = 131.9) and exhibited good predictive power (q(2) = 0.79). The QSAR model suggests that the inclusion of hydrophobic substituents will enhance the Tpl2 kinase inhibition. In addition, H-bond donating groups, negative ionic groups and electron withdrawing groups positively contribute to the Tpl2 kinase inhibition. Further, pharmacophoric model was validated by the receiver operating characteristic curve analysis and was employed for virtual screening to identify six potential Tpl2 kinase inhibitors. The findings of this study provide a set of guidelines for designing compounds with better Tpl2 kinase inhibitory potency.

  16. A combination of pharmacophore modeling, atom-based 3D-QSAR, molecular docking and molecular dynamics simulation studies on PDE4 enzyme inhibitors.

    PubMed

    Tripuraneni, Naga Srinivas; Azam, Mohammed Afzal

    2016-11-01

    Phosphodiesterases 4 enzyme is an attractive target for the design of anti-inflammatory and bronchodilator agents. In the present study, pharmacophore and atom-based 3D-QSAR studies were carried out for pyrazolopyridine and quinoline derivatives using Schrödinger suite 2014-3. A four-point pharmacophore model was developed using 74 molecules having pIC50 ranging from 10.1 to 4.5. The best four feature model consists of one hydrogen bond acceptor, two aromatic rings, and one hydrophobic group. The pharmacophore hypothesis yielded a statistically significant 3D-QSAR model, with a high correlation coefficient (R(2 )= .9949), cross validation coefficient (Q(2 )= .7291), and Pearson-r (.9107) at six component partial least square factor. The external validation indicated that our QSAR model possessed high predictive power with R(2) value of .88. The generated model was further validated by enrichment studies using the decoy test. Molecular docking, free energy calculation, and molecular dynamics (MD) simulation studies have been performed to explore the putative binding modes of these ligands. A 10-ns MD simulation confirmed the docking results of both stability of the 1XMU-ligand complex and the presumed active conformation. Outcomes of the present study provide insight in designing novel molecules with better PDE4 inhibitory activity.

  17. Mechanistic Insights into the Binding of Class IIa HDAC Inhibitors toward Spinocerebellar Ataxia Type-2: A 3D-QSAR and Pharmacophore Modeling Approach

    PubMed Central

    Sinha, Siddharth; Goyal, Sukriti; Somvanshi, Pallavi; Grover, Abhinav

    2017-01-01

    Spinocerebellar ataxia (SCA-2) type-2 is a rare neurological disorder among the nine polyglutamine disorders, mainly caused by polyQ (CAG) trinucleotide repeats expansion within gene coding ataxin-2 protein. The expanded trinucleotide repeats within the ataxin-2 protein sequesters transcriptional cofactors i.e., CREB-binding protein (CBP), Ataxin-2 binding protein 1 (A2BP1) leading to a state of hypo-acetylation and transcriptional repression. Histone de-acetylases inhibitors (HDACi) have been reported to restore transcriptional balance through inhibition of class IIa HDAC's, that leads to an increased acetylation and transcription as demonstrated through in-vivo studies on mouse models of Huntington's. In this study, 61 di-aryl cyclo-propanehydroxamic acid derivatives were used for developing three dimensional (3D) QSAR and pharmacophore models. These models were then employed for screening and selection of anti-ataxia compounds. The chosen QSAR model was observed to be statistically robust with correlation coefficient (r2) value of 0.6774, cross-validated correlation coefficient (q2) of 0.6157 and co-relation coefficient for external test set (pred_r2) of 0.7570. A high F-test value of 77.7093 signified the robustness of the model. Two potential drug leads ZINC 00608101 (SEI) and ZINC 00329110 (ACI) were selected after a coalesce procedure of pharmacophore based screening using the pharmacophore model ADDRR.20 and structural analysis using molecular docking and dynamics simulations. The pharmacophore and the 3D-QSAR model generated were further validated for their screening and prediction ability using the enrichment factor (EF), goodness of hit (GH), and receiver operating characteristics (ROC) curve analysis. The compounds SEI and ACI exhibited a docking score of −10.097 and −9.182 kcal/mol, respectively. An evaluation of binding conformation of ligand-bound protein complexes was performed with MD simulations for a time period of 30 ns along with free

  18. Mechanistic Insights into the Binding of Class IIa HDAC Inhibitors toward Spinocerebellar Ataxia Type-2: A 3D-QSAR and Pharmacophore Modeling Approach.

    PubMed

    Sinha, Siddharth; Goyal, Sukriti; Somvanshi, Pallavi; Grover, Abhinav

    2016-01-01

    Spinocerebellar ataxia (SCA-2) type-2 is a rare neurological disorder among the nine polyglutamine disorders, mainly caused by polyQ (CAG) trinucleotide repeats expansion within gene coding ataxin-2 protein. The expanded trinucleotide repeats within the ataxin-2 protein sequesters transcriptional cofactors i.e., CREB-binding protein (CBP), Ataxin-2 binding protein 1 (A2BP1) leading to a state of hypo-acetylation and transcriptional repression. Histone de-acetylases inhibitors (HDACi) have been reported to restore transcriptional balance through inhibition of class IIa HDAC's, that leads to an increased acetylation and transcription as demonstrated through in-vivo studies on mouse models of Huntington's. In this study, 61 di-aryl cyclo-propanehydroxamic acid derivatives were used for developing three dimensional (3D) QSAR and pharmacophore models. These models were then employed for screening and selection of anti-ataxia compounds. The chosen QSAR model was observed to be statistically robust with correlation coefficient (r(2)) value of 0.6774, cross-validated correlation coefficient (q(2)) of 0.6157 and co-relation coefficient for external test set (pred_r(2)) of 0.7570. A high F-test value of 77.7093 signified the robustness of the model. Two potential drug leads ZINC 00608101 (SEI) and ZINC 00329110 (ACI) were selected after a coalesce procedure of pharmacophore based screening using the pharmacophore model ADDRR.20 and structural analysis using molecular docking and dynamics simulations. The pharmacophore and the 3D-QSAR model generated were further validated for their screening and prediction ability using the enrichment factor (EF), goodness of hit (GH), and receiver operating characteristics (ROC) curve analysis. The compounds SEI and ACI exhibited a docking score of -10.097 and -9.182 kcal/mol, respectively. An evaluation of binding conformation of ligand-bound protein complexes was performed with MD simulations for a time period of 30 ns along with free

  19. In silico exploration of c-KIT inhibitors by pharmaco-informatics methodology: pharmacophore modeling, 3D QSAR, docking studies, and virtual screening.

    PubMed

    Chaudhari, Prashant; Bari, Sanjay

    2016-02-01

    c-KIT is a component of the platelet-derived growth factor receptor family, classified as type-III receptor tyrosine kinase. c-KIT has been reported to be involved in, small cell lung cancer, other malignant human cancers, and inflammatory and autoimmune diseases associated with mast cells. Available c-KIT inhibitors suffer from tribulations of growing resistance or cardiac toxicity. A combined in silico pharmacophore and structure-based virtual screening was performed to identify novel potential c-KIT inhibitors. In the present study, five molecules from the ZINC database were retrieved as new potential c-KIT inhibitors, using Schrödinger's Maestro 9.0 molecular modeling suite. An atom-featured 3D QSAR model was built using previously reported c-KIT inhibitors containing the indolin-2-one scaffold. The developed 3D QSAR model ADHRR.24 was found to be significant (R2 = 0.9378, Q2 = 0.7832) and instituted to be sufficiently robust with good predictive accuracy, as confirmed through external validation approaches, Y-randomization and GH approach [GH score 0.84 and Enrichment factor (E) 4.964]. The present QSAR model was further validated for the OECD principle 3, in that the applicability domain was calculated using a "standardization approach." Molecular docking of the QSAR dataset molecules and final ZINC hits were performed on the c-KIT receptor (PDB ID: 3G0E). Docking interactions were in agreement with the developed 3D QSAR model. Model ADHRR.24 was explored for ligand-based virtual screening followed by in silico ADME prediction studies. Five molecules from the ZINC database were obtained as potential c-KIT inhibitors with high in -silico predicted activity and strong key binding interactions with the c-KIT receptor.

  20. Combined pharmacophore and 3D-QSAR study on a series of Staphylococcus aureus Sortase A inhibitors.

    PubMed

    Uddin, Reaz; Lodhi, Mazhar U; Ul-Haq, Zaheer

    2012-08-01

    Methicillin resistant Staphylococcus aureus has become a major health concern and it requires new therapeutic agents. Staphylococcus aureus Sortase A enzyme contributes in adherence of bacteria with the cell wall of host cell; consequently, inhibition of S. aureus Sortase A by small molecules could be employed as potential antibacterial agents against methicillin resistant S. aureus. Current study focused on the identification of 3D pharmacophoric features within a series of rhodanine, pyridazinone, and pyrazolethione analogs as S. aureus Sortase A inhibitors. Pharmacophore model was constructed employing representative molecules using Genetic Algorithm with Linear Assignment of Hypermolecular Alignment of Database. The identified pharmacophoric points were then utilized to create alignment hypothesis for three-dimensional quantitative structure-activity relationships. Outcome of comparative molecular field analysis and comparative molecular similarity indices analysis experiments were in good agreement (comparative molecular field analysis: q(2) = 0.562 and r(2) = 0.995, comparative molecular similarity indices analysis: q(2) = 0.549 and r(2) = 0.978) and capable of explaining the variance in biological activities coherently with respect to the structural features of compounds. The results were also found in concurrence with the outcome of pharmacophoric features.

  1. A mechanistic approach to explore novel HDAC1 inhibitor using pharmacophore modeling, 3D- QSAR analysis, molecular docking, density functional and molecular dynamics simulation study.

    PubMed

    Choubey, Sanjay K; Jeyaraman, Jeyakanthan

    2016-11-01

    Deregulated epigenetic activity of Histone deacetylase 1 (HDAC1) in tumor development and carcinogenesis pronounces it as promising therapeutic target for cancer treatment. HDAC1 has recently captured the attention of researchers owing to its decisive role in multiple types of cancer. In the present study a multistep framework combining ligand based 3D-QSAR, molecular docking and Molecular Dynamics (MD) simulation studies were performed to explore potential compound with good HDAC1 binding affinity. Four different pharmacophore hypotheses Hypo1 (AADR), Hypo2 (AAAH), Hypo3 (AAAR) and Hypo4 (ADDR) were obtained. The hypothesis Hypo1 (AADR) with two hydrogen bond acceptors (A), one hydrogen bond donor (D) and one aromatics ring (R) was selected to build 3D-QSAR model on the basis of statistical parameter. The pharmacophore hypothesis produced a statistically significant QSAR model, with co-efficient of correlation r(2)=0.82 and cross validation correlation co-efficient q(2)=0.70. External validation result displays high predictive power with r(2) (o) value of 0.88 and r(2) (m) value of 0.58 to carry out further in silico studies. Virtual screening result shows ZINC70450932 as the most promising lead where HDAC1 interacts with residues Asp99, His178, Tyr204, Phe205 and Leu271 forming seven hydrogen bonds. A high docking score (-11.17kcal/mol) and lower docking energy -37.84kcal/mol) displays the binding efficiency of the ligand. Binding free energy calculation was done using MM/GBSA to access affinity of ligands towards protein. Density Functional Theory was employed to explore electronic features of the ligands describing intramolcular charge transfer reaction. Molecular dynamics simulation studies at 50ns display metal ion (Zn)-ligand interaction which is vital to inhibit the enzymatic activity of the protein.

  2. Pharmacophore modelling, atom-based 3D-QSAR generation and virtual screening of molecules projected for mPGES-1 inhibitory activity.

    PubMed

    Misra, S; Saini, M; Ojha, H; Sharma, D; Sharma, K

    2017-01-01

    COX-2 inhibitors exhibit anticancer effects in various cancer models but due to the adverse side effects associated with these inhibitors, targeting molecules downstream of COX-2 (such as mPGES-1) has been suggested. Even after calls for mPGES-1 inhibitor design, to date there are only a few published inhibitors targeting the enzyme and displaying anticancer activity. In the present study, we have deployed both ligand and structure-based drug design approaches to hunt novel drug-like candidates as mPGES-1 inhibitors. Fifty-four compounds with tested mPGES-1 inhibitory value were used to develop a model with four pharmacophoric features. 3D-QSAR studies were undertaken to check the robustness of the model. Statistical parameters such as r(2) = 0.9924, q(2) = 0.5761 and F test = 1139.7 indicated significant predictive ability of the proposed model. Our QSAR model exhibits sites where a hydrogen bond donor, hydrophobic group and the aromatic ring can be substituted so as to enhance the efficacy of the inhibitor. Furthermore, we used our validated pharmacophore model as a three-dimensional query to screen the FDA-approved Lopac database. Finally, five compounds were selected as potent mPGES-1 inhibitors on the basis of their docking energy and pharmacokinetic properties such as ADME and Lipinski rule of five.

  3. Development of 3D-QSAR Model for Acetylcholinesterase Inhibitors Using a Combination of Fingerprint, Molecular Docking, and Structure-Based Pharmacophore Approaches.

    PubMed

    Lee, Sehan; Barron, Mace G

    2015-11-01

    Acetylcholinesterase (AChE), a serine hydrolase vital for regulating the neurotransmitter acetylcholine in animals, has been used as a target for drugs and pesticides. With the increasing availability of AChE crystal structures, with or without ligands bound, structure-based approaches have been successfully applied to AChE inhibitors (AChEIs). The major limitation of these approaches has been the small applicability domain due to the lack of structural diversity in the training set. In this study, we developed a 3 dimensional quantitative structure-activity relationship (3D-QSAR) for inhibitory activity of 89 reversible and irreversible AChEIs including drugs and insecticides. A 3D-fingerprint descriptor encoding protein-ligand interactions was developed using molecular docking and structure-based pharmacophore to rationalize the structural requirements responsible for the activity of these compounds. The obtained 3D-QSAR model exhibited high correlation value (R(2) = 0.93) and low mean absolute error (MAE = 0.32 log units) for the training set (n = 63). The model was predictive across a range of structures as shown by the leave-one-out cross-validated correlation coefficient (Q(2) = 0.89) and external validation results (n = 26, R(2) = 0.89, and MAE = 0.38 log units). The model revealed that the compounds with high inhibition potency had proper conformation in the active site gorge and interacted with key amino acid residues, in particular Trp84 and Phe330 at the catalytic anionic site, Trp279 at the peripheral anionic site, and Gly118, Gly119, and Ala201 at the oxyanion hole. The resulting universal 3D-QSAR model provides insight into the multiple molecular interactions determining AChEI potency that may guide future chemical design and regulation of toxic AChEIs.

  4. Three-dimensional quantitative structure-activity relationship (3D QSAR) and pharmacophore elucidation of tetrahydropyran derivatives as serotonin and norepinephrine transporter inhibitors

    NASA Astrophysics Data System (ADS)

    Kharkar, Prashant S.; Reith, Maarten E. A.; Dutta, Aloke K.

    2008-01-01

    Three-dimensional quantitative structure-activity relationship (3D QSAR) using comparative molecular field analysis (CoMFA) was performed on a series of substituted tetrahydropyran (THP) derivatives possessing serotonin (SERT) and norepinephrine (NET) transporter inhibitory activities. The study aimed to rationalize the potency of these inhibitors for SERT and NET as well as the observed selectivity differences for NET over SERT. The dataset consisted of 29 molecules, of which 23 molecules were used as the training set for deriving CoMFA models for SERT and NET uptake inhibitory activities. Superimpositions were performed using atom-based fitting and 3-point pharmacophore-based alignment. Two charge calculation methods, Gasteiger-Hückel and semiempirical PM3, were tried. Both alignment methods were analyzed in terms of their predictive abilities and produced comparable results with high internal and external predictivities. The models obtained using the 3-point pharmacophore-based alignment outperformed the models with atom-based fitting in terms of relevant statistics and interpretability of the generated contour maps. Steric fields dominated electrostatic fields in terms of contribution. The selectivity analysis (NET over SERT), though yielded models with good internal predictivity, showed very poor external test set predictions. The analysis was repeated with 24 molecules after systematically excluding so-called outliers (5 out of 29) from the model derivation process. The resulting CoMFA model using the atom-based fitting exhibited good statistics and was able to explain most of the selectivity (NET over SERT)-discriminating factors. The presence of -OH substituent on the THP ring was found to be one of the most important factors governing the NET selectivity over SERT. Thus, a 4-point NET-selective pharmacophore, after introducing this newly found H-bond donor/acceptor feature in addition to the initial 3-point pharmacophore, was proposed.

  5. Inhibition of immune complex-mediated neutrophil oxidative metabolism: a pharmacophore model for 3-phenylcoumarin derivatives using GRIND-based 3D-QSAR and 2D-QSAR procedures.

    PubMed

    Kabeya, Luciana M; da Silva, Carlos H T P; Kanashiro, Alexandre; Campos, Joaquín M; Azzolini, Ana Elisa C S; Polizello, Ana Cristina M; Pupo, Mônica T; Lucisano-Valim, Yara M

    2008-05-01

    In this study, twenty hydroxylated and acetoxylated 3-phenylcoumarin derivatives were evaluated as inhibitors of immune complex-stimulated neutrophil oxidative metabolism and possible modulators of the inflammatory tissue damage found in type III hypersensitivity reactions. By using lucigenin- and luminol-enhanced chemiluminescence assays (CL-luc and CL-lum, respectively), we found that the 6,7-dihydroxylated and 6,7-diacetoxylated 3-phenylcoumarin derivatives were the most effective inhibitors. Different structural features of the other compounds determined CL-luc and/or CL-lum inhibition. The 2D-QSAR analysis suggested the importance of hydrophobic contributions to explain these effects. In addition, a statistically significant 3D-QSAR model built applying GRIND descriptors allowed us to propose a virtual receptor site considering pharmacophoric regions and mutual distances. Furthermore, the 3-phenylcoumarins studied were not toxic to neutrophils under the assessed conditions.

  6. 3D-QSAR (CoMFA and CoMSIA) and pharmacophore (GALAHAD) studies on the differential inhibition of aldose reductase by flavonoid compounds.

    PubMed

    Caballero, Julio

    2010-11-01

    Inhibitory activities of flavonoid derivatives against aldose reductase (AR) enzyme were modelled by using CoMFA, CoMSIA and GALAHAD methods. CoMFA and CoMSIA methods were used for deriving quantitative structure-activity relationship (QSAR) models. All QSAR models were trained with 55 compounds, after which they were evaluated for predictive ability with additional 14 compounds. The best CoMFA model included both steric and electrostatic fields, meanwhile, the best CoMSIA model included steric, hydrophobic and H-bond acceptor fields. These models had a good predictive quality according to both internal and external validation criteria. On the other hand, GALAHAD was used for deriving a 3D pharmacophore model. Twelve active compounds were used for deriving this model. The obtained model included hydrophobe, hydrogen bond acceptor and hydrogen bond donor features; it was able to identify the active AR inhibitors from the remaining compounds. These in silico tools might be useful in the rational design of new AR inhibitors.

  7. Pharmacophore and 3D-QSAR Characterization of 6-Arylquinazolin-4-amines as Cdc2-like Kinase 4 (Clk4) and Dual Specificity Tyrosine-phosphorylation-regulated Kinase 1A (Dyrk1A) Inhibitors

    PubMed Central

    2013-01-01

    Cdc2-like kinase 4 (Clk4) and dual specificity tyrosine-phosphorylation-regulated kinase 1A (Dyrk1A) are protein kinases that are promising targets for treatment of diseases caused by abnormal gene splicing. 6-Arylquinazolin-4-amines have been recently identified as potent Clk4 and Dyrk1A inhibitors. In order to understand the structure–activity correlation of these analogs, we have applied ligand-based pharmacophore and 3D-QSAR modeling combined with structure-based homology modeling and docking. The high R2 and Q2 (0.88 and 0.79 for Clk4, 0.85 and 0.82 for Dyrk1A, respectively) based on validation with training and test set compounds suggested that the generated 3D-QSAR models are reliable in predicting novel ligand activities against Clk4 and Dyrk1A. The binding mode identified through docking ligands to the ATP binding domain of Clk4 was consistent with the structural properties and energy field contour maps characterized by pharmacophore and 3D-QSAR models and gave valuable insights into the structure–activity profile of 6-arylquinazolin-4-amine analogs. The obtained 3D-QSAR and pharmacophore models in combination with the binding mode between inhibitor and residues of Clk4 will be helpful for future lead compound identification and optimization to design potent and selective Clk4 and Dyrk1A inhibitors. PMID:23496085

  8. Development of predictive pharmacophore model for in silico screening, and 3D QSAR CoMFA and CoMSIA studies for lead optimization, for designing of potent tumor necrosis factor alpha converting enzyme inhibitors

    NASA Astrophysics Data System (ADS)

    Murumkar, Prashant Revan; Zambre, Vishal Prakash; Yadav, Mange Ram

    2010-02-01

    A chemical feature-based pharmacophore model was developed for Tumor Necrosis Factor-α converting enzyme (TACE) inhibitors. A five point pharmacophore model having two hydrogen bond acceptors (A), one hydrogen bond donor (D) and two aromatic rings (R) with discrete geometries as pharmacophoric features was developed. The pharmacophore model so generated was then utilized for in silico screening of a database. The pharmacophore model so developed was validated by using four compounds having proven TACE inhibitory activity which were grafted into the database. These compounds mapped well onto the five listed pharmacophoric features. This validated pharmacophore model was also used for alignment of molecules in CoMFA and CoMSIA analysis. The contour maps of the CoMFA/CoMSIA models were utilized to provide structural insight for activity improvement of potential novel TACE inhibitors. The pharmacophore model so developed could be used for in silico screening of any commercial/in house database for identification of TACE inhibiting lead compounds, and the leads so identified could be optimized using the developed CoMSIA model. The present work highlights the tremendous potential of the two mutually complementary ligand-based drug designing techniques (i.e. pharmacophore mapping and 3D-QSAR analysis) using TACE inhibitors as prototype biologically active molecules.

  9. Identification of novel histone deacetylase 1 inhibitors by combined pharmacophore modeling, 3D-QSAR analysis, in silico screening and Density Functional Theory (DFT) approaches

    NASA Astrophysics Data System (ADS)

    Choubey, Sanjay K.; Mariadasse, Richard; Rajendran, Santhosh; Jeyaraman, Jeyakanthan

    2016-12-01

    Overexpression of HDAC1, a member of Class I histone deacetylase is reported to be implicated in breast cancer. Epigenetic alteration in carcinogenesis has been the thrust of research for few decades. Increased deacetylation leads to accelerated cell proliferation, cell migration, angiogenesis and invasion. HDAC1 is pronounced as the potential drug target towards the treatment of breast cancer. In this study, the biochemical potential of 6-aminonicotinamide derivatives was rationalized. Five point pharmacophore model with one hydrogen-bond acceptor (A3), two hydrogen-bond donors (D5, D6), one ring (R12) and one hydrophobic group (H8) was developed using 6-aminonicotinamide derivatives. The pharmacophore hypothesis yielded a 3D-QSAR model with correlation-coefficient (r2 = 0.977, q2 = 0.801) and it was externally validated with (r2pred = 0.929, r2cv = 0.850 and r2m = 0.856) which reveals the statistical significance of the model having high predictive power. The model was then employed as 3D search query for virtual screening against compound libraries (Zinc, Maybridge, Enamine, Asinex, Toslab, LifeChem and Specs) in order to identify novel scaffolds which can be experimentally validated to design future drug molecule. Density Functional Theory (DFT) at B3LYP/6-31G* level was employed to explore the electronic features of the ligands involved in charge transfer reaction during receptor ligand interaction. Binding free energy (ΔGbind) calculation was done using MM/GBSA which defines the affinity of ligands towards the receptor.

  10. A combined pharmacophore modeling, 3D-QSAR and molecular docking study of substituted bicyclo-[3.3.0]oct-2-enes as liver receptor homolog-1 (LRH-1) agonists

    NASA Astrophysics Data System (ADS)

    Lalit, Manisha; Gangwal, Rahul P.; Dhoke, Gaurao V.; Damre, Mangesh V.; Khandelwal, Kanchan; Sangamwar, Abhay T.

    2013-10-01

    A combined pharmacophore modelling, 3D-QSAR and molecular docking approach was employed to reveal structural and chemical features essential for the development of small molecules as LRH-1 agonists. The best HypoGen pharmacophore hypothesis (Hypo1) consists of one hydrogen-bond donor (HBD), two general hydrophobic (H), one hydrophobic aromatic (HYAr) and one hydrophobic aliphatic (HYA) feature. It has exhibited high correlation coefficient of 0.927, cost difference of 85.178 bit and low RMS value of 1.411. This pharmacophore hypothesis was cross-validated using test set, decoy set and Cat-Scramble methodology. Subsequently, validated pharmacophore hypothesis was used in the screening of small chemical databases. Further, 3D-QSAR models were developed based on the alignment obtained using substructure alignment. The best CoMFA and CoMSIA model has exhibited excellent rncv2 values of 0.991 and 0.987, and rcv2 values of 0.767 and 0.703, respectively. CoMFA predicted rpred2 of 0.87 and CoMSIA predicted rpred2 of 0.78 showed that the predicted values were in good agreement with the experimental values. Molecular docking analysis reveals that π-π interaction with His390 and hydrogen bond interaction with His390/Arg393 is essential for LRH-1 agonistic activity. The results from pharmacophore modelling, 3D-QSAR and molecular docking are complementary to each other and could serve as a powerful tool for the discovery of potent small molecules as LRH-1 agonists.

  11. Analysis of stereoelectronic properties, mechanism of action and pharmacophore of synthetic indolo[2,1-b]quinazoline-6,12-dione derivatives in relation to antileishmanial activity using quantum chemical, cyclic voltammetry and 3-D-QSAR CATALYST procedures.

    PubMed

    Bhattacharjee, Apurba K; Skanchy, David J; Jennings, Barton; Hudson, Thomas H; Brendle, James J; Werbovetz, Karl A

    2002-06-01

    Several indolo[2,1-b]quinazoline-6,12-dione (tryptanthrin) derivatives exhibited remarkable activity at concentrations below 100 ng/mL when tested against in vitro Leishmania donovani amastigotes. The in vitro toxicity studies indicate that the compounds are fairly well tolerated in both macrophage and neuronal lines. An analysis based on qualitative and quantitative structure-activity relationship studies between in vitro antileishmanial activity and molecular electronic structure of 27 analogues of indolo[2,1-b]quinazoline-6,12-dione is presented here by using a combination of semi-empirical AM1 quantum chemical, cyclic voltammetry and a pharmacophore generation (CATALYST) methods. A modest to good correlation is observed between activity and a few calculated molecular properties such as molecular density, octanol-water partition coefficient, molecular orbital energies, and redox potentials. Electron transfer seems to be a plausible path in the mechanism of action of the compounds. A pharmacophore generated by using the 3-D QSAR of CATALYST produced a fairly accurate predictive model of antileishmanial activity of the tryptanthrins. The validity of the pharmacophore model extends to structurally different class of compounds that could open new frontiers for study. The carbonyl group of the five- and six-membered rings in the indolo[2,1-b]quinazoline-6,12-dione skeleton and the electron transfer ability to the carbonyl atom appear to be crucial for activity.

  12. 3D QSAR studies, pharmacophore modeling, and virtual screening of diarylpyrazole-benzenesulfonamide derivatives as a template to obtain new inhibitors, using human carbonic anhydrase II as a model protein.

    PubMed

    Entezari Heravi, Yeganeh; Sereshti, Hassan; Saboury, Ali Akbar; Ghasemi, Jahan; Amirmostofian, Marzieh; Supuran, Claudiu T

    2017-12-01

    A 3D-QSAR modeling was performed on a series of diarylpyrazole-benzenesulfonamide derivatives acting as inhibitors of the metalloenzyme carbonic anhydrase (CA, EC 4.2.1.1). The compounds were collected from two datasets with the same scaffold, and utilized as a template for a new pharmacophore model to screen the ZINC database of commercially available derivatives. The datasets were divided into training, test, and validation sets. As the first step, comparative molecular field analysis (CoMFA), CoMFA region focusing and comparative molecular similarity indices analysis (CoMSIA) in parallel with docking studies were applied to a set of 41 human (h) CA II inhibitors. The validity and the prediction capacity of the resulting models were evaluated by leave-one-out (LOO) cross-validation approach. The reliability of the model for the prediction of possibly new CA inhibitors was also tested.

  13. Pharmacophore generation, atom-based 3D-QSAR, HQSAR and activity cliff analyses of benzothiazine and deazaxanthine derivatives as dual A2A antagonists/MAO‑B inhibitors.

    PubMed

    Bhayye, S S; Roy, K; Saha, A

    2016-02-12

    Dual inhibition of A2A and MAO-B is an emerging strategy in neurodegenerative diseases, such as Alzheimer's disease (AD) and Parkinson's disease (PD). In this study, atom-based three-dimensional quantitative structure-activity relationship (3D-QSAR) and hologram quantitative structure-activity relationship (HQSAR) models were generated with benzothiazine and deazaxanthine derivatives. Based on activity against A2A and MAO-B, two statistically significant 3D-QSAR models (r(2) = 0.96, q(2) = 0.76 and r(2) = 0.91, q(2) = 0.63) and HQSAR models (r(2) = 0.93, q(2) = 0.68 and r(2) = 0.97, q(2) = 0.58) were developed. In an activity cliff analysis, structural outliers were identified by calculating the Mahalanobis distance for a pair of compounds with A2A and MAO-B inhibitory activities. The generated 3D-QSAR and HQSAR models, activity cliff analysis, molecular docking and dynamic studies for dual target protein inhibitors provide key structural scaffolds that serve as building blocks in designing drug-like molecules for neurodegenerative diseases.

  14. 3D-Pharmacophore mapping of thymidine-based inhibitors of TMPK as potential antituberculosis agents

    NASA Astrophysics Data System (ADS)

    Andrade, Carolina Horta; Pasqualoto, Kerly F. M.; Ferreira, Elizabeth I.; Hopfinger, Anton J.

    2010-02-01

    Tuberculosis (TB) is the primary cause of mortality among infectious diseases. Mycobacterium tuberculosis monophosphate kinase (TMPKmt) is essential to DNA replication. Thus, this enzyme represents a promising target for developing new drugs against TB. In the present study, the receptor-independent, RI, 4D-QSAR method has been used to develop QSAR models and corresponding 3D-pharmacophores for a set of 81 thymidine analogues, and two corresponding subsets, reported as inhibitors of TMPKmt . The resulting optimized models are not only statistically significant with r 2 ranging from 0.83 to 0.92 and q 2 from 0.78 to 0.88, but also are robustly predictive based on test set predictions. The most and the least potent inhibitors in their respective postulated active conformations, derived from each of the models, were docked in the active site of the TMPKmt crystal structure. There is a solid consistency between the 3D-pharmacophore sites defined by the QSAR models and interactions with binding site residues. Moreover, the QSAR models provide insights regarding a probable mechanism of action of the analogues.

  15. Exploring conformational search protocols for ligand-based virtual screening and 3-D QSAR modeling

    NASA Astrophysics Data System (ADS)

    Cappel, Daniel; Dixon, Steven L.; Sherman, Woody; Duan, Jianxin

    2015-02-01

    3-D ligand conformations are required for most ligand-based drug design methods, such as pharmacophore modeling, shape-based screening, and 3-D QSAR model building. Many studies of conformational search methods have focused on the reproduction of crystal structures (i.e. bioactive conformations); however, for ligand-based modeling the key question is how to generate a ligand alignment that produces the best results for a given query molecule. In this work, we study different conformation generation modes of ConfGen and the impact on virtual screening (Shape Screening and e-Pharmacophore) and QSAR predictions (atom-based and field-based). In addition, we develop a new search method, called common scaffold alignment, that automatically detects the maximum common scaffold between each screening molecule and the query to ensure identical coordinates of the common core, thereby minimizing the noise introduced by analogous parts of the molecules. In general, we find that virtual screening results are relatively insensitive to the conformational search protocol; hence, a conformational search method that generates fewer conformations could be considered "better" because it is more computationally efficient for screening. However, for 3-D QSAR modeling we find that more thorough conformational sampling tends to produce better QSAR predictions. In addition, significant improvements in QSAR predictions are obtained with the common scaffold alignment protocol developed in this work, which focuses conformational sampling on parts of the molecules that are not part of the common scaffold.

  16. DYNAMIC 3D QSAR TECHNIQUES: APPLICATIONS IN TOXICOLOGY

    EPA Science Inventory

    Two dynamic techniques recently developed to account for conformational flexibility of chemicals in 3D QSARs are presented. In addition to the impact of conformational flexibility of chemicals in 3D QSAR models, the applicability of various molecular descriptors is discussed. The...

  17. QSAR and 3D QSAR of inhibitors of the epidermal growth factor receptor

    NASA Astrophysics Data System (ADS)

    Pinto-Bazurco, Mariano; Tsakovska, Ivanka; Pajeva, Ilza

    This article reports quantitative structure-activity relationships (QSAR) and 3D QSAR models of 134 structurally diverse inhibitors of the epidermal growth factor receptor (EGFR) tyrosine kinase. Free-Wilson analysis was used to derive the QSAR model. It identified the substituents in aniline, the polycyclic system, and the substituents at the 6- and 7-positions of the polycyclic system as the most important structural features. Comparative molecular field analysis (CoMFA) and comparative molecular similarity indices analysis (CoMSIA) were used in the 3D QSAR modeling. The steric and electrostatic interactions proved the most important for the inhibitory effect. Both QSAR and 3D QSAR models led to consistent results. On the basis of the statistically significant models, new structures were proposed and their inhibitory activities were predicted.

  18. Ligand-based and e-pharmacophore modeling, 3D-QSAR and hierarchical virtual screening to identify dual inhibitors of spleen tyrosine kinase (Syk) and janus kinase 3 (JAK3).

    PubMed

    Kaur, Maninder; Silakari, Om

    2016-11-11

    The clinical efficacy of multiple kinase inhibitors has caught the interest of Pharmaceutical and Biotech researchers to develop potential drugs with multi-kinase inhibitory activity for complex diseases. In the present work, we attempted to identify dual inhibitors of spleen tyrosine kinase (Syk) and janus kinase 3 (JAK3), keys players in immune signaling, by developing ideal pharmacophores integrating Ligand-based pharmacophore models (LBPMs) and Structure-based pharmacophore models (SBPMs), thereby projecting the optimum pharmacophoric required for inhibition of both the kinases. The four point LBPM; ADPR.14 suggested the presence of one hydrogen bond acceptor, one hydrogen bond donor, one positive ionizable, and one ring aromatic feature for Syk inhibitory activity and AADH.54 proposed the necessity of two hydrogen bond acceptor, one hydrogen bond donor, and one hydrophobic feature for JAK3 inhibitory activity. To our interest, SBPMs identified additional ring aromatic features required for inhibition of both the kinases. For Syk inhibitory activity, the hydrogen bond acceptor feature indicated by LBPM was devoid of forming hydrogen bonding interaction with the hinge region amino acid residue (Ala451). Thus merging the information revealed by both LBPMs and SBPMs, ideal pharmacophore models i.e. ADPRR.14 (Syk) and AADHR.54 (JAK3) were generated. These models after rigorous statistical validation were used for screening of Asinex database. The systematic virtual screening protocol, including pharmacophore and docking-based screening, ADME property, and MM-GBSA energy calculations, retrieved final 10 hits as dual inhibitors of Syk and JAK3. Final 10 hits thus obtained can aid in the development of potential therapeutic agents for autoimmune disorders. Also the top two hits were evaluated against both the enzymes.

  19. Discovery of potent NEK2 inhibitors as potential anticancer agents using structure-based exploration of NEK2 pharmacophoric space coupled with QSAR analyses.

    PubMed

    Khanfar, Mohammad A; Banat, Fahmy; Alabed, Shada; Alqtaishat, Saja

    2017-02-01

    High expression of Nek2 has been detected in several types of cancer and it represents a novel target for human cancer. In the current study, structure-based pharmacophore modeling combined with multiple linear regression (MLR)-based QSAR analyses was applied to disclose the structural requirements for NEK2 inhibition. Generated pharmacophoric models were initially validated with receiver operating characteristic (ROC) curve, and optimum models were subsequently implemented in QSAR modeling with other physiochemical descriptors. QSAR-selected models were implied as 3D search filters to mine the National Cancer Institute (NCI) database for novel NEK2 inhibitors, whereas the associated QSAR model prioritized the bioactivities of captured hits for in vitro evaluation. Experimental validation identified several potent NEK2 inhibitors of novel structural scaffolds. The most potent captured hit exhibited an [Formula: see text] value of 237 nM.

  20. Flexible 3D pharmacophores as descriptors of dynamic biological space.

    PubMed

    Nettles, James H; Jenkins, Jeremy L; Williams, Chris; Clark, Alex M; Bender, Andreas; Deng, Zhan; Davies, John W; Glick, Meir

    2007-10-01

    Development of a pharmacophore hypothesis related to small-molecule activity is pivotal to chemical optimization of a series, since it defines features beneficial or detrimental to activity. Although crystal structures may provide detailed 3D interaction information for one molecule with its receptor, docking a different ligand to that model often leads to unreliable results due to protein flexibility. Graham Richards' lab was one of the first groups to utilize "fuzzy" pattern recognition algorithms taken from the field of image processing to solve problems in protein modeling. Thus, descriptor "fuzziness" was partly able to emulate conformational flexibility of the target while simultaneously enhancing the speed of the search. In this work, we extend these developments to a ligand-based method for describing and aligning molecules in flexible chemical space termed FEature POint PharmacophoreS (FEPOPS), which allows exploration of dynamic biological space. We develop a novel, combinatorial algorithm for molecular comparisons and evaluate it using the WOMBAT dataset. The new approach shows superior retrospective virtual screening performance than earlier shape-based or charge-based algorithms. Additionally, we use target prediction to evaluate how FEPOPS alignments match the molecules biological activity by identifying the atoms and features that make the key contributions to overall chemical similarity. Overall, we find that FEPOPS are sufficiently fuzzy and flexible to find not only new ligand scaffolds, but also challenging molecules that occupy different conformational states of dynamic biological space as from induced fits.

  1. Identification of potential influenza virus endonuclease inhibitors through virtual screening based on the 3D-QSAR model.

    PubMed

    Kim, J; Lee, C; Chong, Y

    2009-01-01

    Influenza endonucleases have appeared as an attractive target of antiviral therapy for influenza infection. With the purpose of designing a novel antiviral agent with enhanced biological activities against influenza endonuclease, a three-dimensional quantitative structure-activity relationships (3D-QSAR) model was generated based on 34 influenza endonuclease inhibitors. The comparative molecular similarity index analysis (CoMSIA) with a steric, electrostatic and hydrophobic (SEH) model showed the best correlative and predictive capability (q(2) = 0.763, r(2) = 0.969 and F = 174.785), which provided a pharmacophore composed of the electronegative moiety as well as the bulky hydrophobic group. The CoMSIA model was used as a pharmacophore query in the UNITY search of the ChemDiv compound library to give virtual active compounds. The 3D-QSAR model was then used to predict the activity of the selected compounds, which identified three compounds as the most likely inhibitor candidates.

  2. Fragment-based strategy for structural optimization in combination with 3D-QSAR.

    PubMed

    Yuan, Haoliang; Tai, Wenting; Hu, Shihe; Liu, Haichun; Zhang, Yanmin; Yao, Sihui; Ran, Ting; Lu, Shuai; Ke, Zhipeng; Xiong, Xiao; Xu, Jinxing; Chen, Yadong; Lu, Tao

    2013-10-01

    Fragment-based drug design has emerged as an important methodology for lead discovery and drug design. Different with other studies focused on fragment library design and active fragment identification, a fragment-based strategy was developed in combination with three-dimensional quantitative structure-activity relationship (3D-QSAR) for structural optimization in this study. Based on a validated scaffold or fragment hit, a series of structural optimization was conducted to convert it to lead compounds, including 3D-QSAR modelling, active site analysis, fragment-based structural optimization and evaluation of new molecules. 3D-QSAR models and active site analysis provided sufficient information for confirming the SAR and pharmacophoric features for fragments. This strategy was evaluated through the structural optimization on a c-Met inhibitor scaffold 5H-benzo[4,5]cyclohepta[1,2-b]pyridin-5-one, which resulted in an c-Met inhibitor with high inhibitory activity. Our study suggested the effectiveness of this fragment-based strategy and the druggability of our newly explored active region. The reliability of this strategy indicated it could also be applied to facilitate lead optimization of other targets.

  3. Fragment-based strategy for structural optimization in combination with 3D-QSAR

    NASA Astrophysics Data System (ADS)

    Yuan, Haoliang; Tai, Wenting; Hu, Shihe; Liu, Haichun; Zhang, Yanmin; Yao, Sihui; Ran, Ting; Lu, Shuai; Ke, Zhipeng; Xiong, Xiao; Xu, Jinxing; Chen, Yadong; Lu, Tao

    2013-10-01

    Fragment-based drug design has emerged as an important methodology for lead discovery and drug design. Different with other studies focused on fragment library design and active fragment identification, a fragment-based strategy was developed in combination with three-dimensional quantitative structure-activity relationship (3D-QSAR) for structural optimization in this study. Based on a validated scaffold or fragment hit, a series of structural optimization was conducted to convert it to lead compounds, including 3D-QSAR modelling, active site analysis, fragment-based structural optimization and evaluation of new molecules. 3D-QSAR models and active site analysis provided sufficient information for confirming the SAR and pharmacophoric features for fragments. This strategy was evaluated through the structural optimization on a c-Met inhibitor scaffold 5H-benzo[4,5]cyclohepta[1,2-b]pyridin-5-one, which resulted in an c-Met inhibitor with high inhibitory activity. Our study suggested the effectiveness of this fragment-based strategy and the druggability of our newly explored active region. The reliability of this strategy indicated it could also be applied to facilitate lead optimization of other targets.

  4. Design, synthesis and 3D-QSAR of beta-carboline derivatives as potent antitumor agents.

    PubMed

    Cao, Rihui; Guan, Xiangdong; Shi, Buxi; Chen, Zhiyong; Ren, Zhenhua; Peng, Wenlie; Song, Huacan

    2010-06-01

    In a continuing effort to develop novel beta-carbolines endowed with better pharmacological profiles, a series of beta-carboline derivatives were designed and synthesized based on the previously developed SARs. Cytotoxicities in vitro of these compounds against a panel of human tumor cell lines were also investigated. The results demonstrated that the N2-benzylated beta-carbolinium bromides 56-60 represented the most potent compounds with IC50 values lower than 10 microM. The application of 3D-QSAR to these compounds explored the structural basis for their biological activities. CoMFA (q2=0.513, r2=0.862) and CoMSIA (q2=0.503, r2=0.831) models were developed for a set of 47 beta-carbolines. The results indicated that the antitumor pharmacophore of these molecules were marked at position-1, -2, -3, -7 and -9 of beta-carboline ring.

  5. Molecular Determinants of Juvenile Hormone Action as Revealed by 3D QSAR Analysis in Drosophila

    PubMed Central

    Beňo, Milan; Farkaš, Robert

    2009-01-01

    Background Postembryonic development, including metamorphosis, of many animals is under control of hormones. In Drosophila and other insects these developmental transitions are regulated by the coordinate action of two principal hormones, the steroid ecdysone and the sesquiterpenoid juvenile hormone (JH). While the mode of ecdysone action is relatively well understood, the molecular mode of JH action remains elusive. Methodology/Principal Findings To gain more insights into the molecular mechanism of JH action, we have tested the biological activity of 86 structurally diverse JH agonists in Drosophila melanogaster. The results were evaluated using 3D QSAR analyses involving CoMFA and CoMSIA procedures. Using this approach we have generated both computer-aided and species-specific pharmacophore fingerprints of JH and its agonists, which revealed that the most active compounds must possess an electronegative atom (oxygen or nitrogen) at both ends of the molecule. When either of these electronegative atoms are replaced by carbon or the distance between them is shorter than 11.5 Å or longer than 13.5 Å, their biological activity is dramatically decreased. The presence of an electron-deficient moiety in the middle of the JH agonist is also essential for high activity. Conclusions/Significance The information from 3D QSAR provides guidelines and mechanistic scope for identification of steric and electrostatic properties as well as donor and acceptor hydrogen-bonding that are important features of the ligand-binding cavity of a JH target protein. In order to refine the pharmacophore analysis and evaluate the outcomes of the CoMFA and CoMSIA study we used pseudoreceptor modeling software PrGen to generate a putative binding site surrogate that is composed of eight amino acid residues corresponding to the defined molecular interactions. PMID:19547707

  6. 3-D QSAutogrid/R: an alternative procedure to build 3-D QSAR models. Methodologies and applications.

    PubMed

    Ballante, Flavio; Ragno, Rino

    2012-06-25

    Since it first appeared in 1988 3-D QSAR has proved its potential in the field of drug design and activity prediction. Although thousands of citations now exist in 3-D QSAR, its development was rather slow with the majority of new 3-D QSAR applications just extensions of CoMFA. An alternative way to build 3-D QSAR models, based on an evolution of software, has been named 3-D QSAutogrid/R and has been developed to use only software freely available to academics. 3-D QSAutogrid/R covers all the main features of CoMFA and GRID/GOLPE with implementation by multiprobe/multiregion variable selection (MPGRS) that improves the simplification of interpretation of the 3-D QSAR map. The methodology is based on the integration of the molecular interaction fields as calculated by AutoGrid and the R statistical environment that can be easily coupled with many free graphical molecular interfaces such as UCSF-Chimera, AutoDock Tools, JMol, and others. The description of each R package is reported in detail, and, to assess its validity, 3-D QSAutogrid/R has been applied to three molecular data sets of which either CoMFA or GRID/GOLPE models were reported in order to compare the results. 3-D QSAutogrid/R has been used as the core engine to prepare more that 240 3-D QSAR models forming the very first 3-D QSAR server ( www.3d-qsar.com ) with its code freely available through R-Cran distribution.

  7. Application of 3D-QSAR techniques in anti-HIV-1 drug design--an overview.

    PubMed

    Debnath, Asim Kumar

    2005-01-01

    Despite the availability of several classes of drugs against acquired immunodeficiency syndrome (AIDS) caused by human immunodeficiency virus type 1(HIV-1), this deadly disease showing very little sign of containment, especially in Sub-Saharan Africa and South-East Asia. More than 20 million people died since the first diagnosis of AIDS more than twenty years ago and almost 40 million people are currently living with HIV/AIDS. Structure-based drug design effort was immensely successful in identifying several drugs that are currently available for the treatment of HIV-1. Many applications have been reported on the use of quantitative structure-activity relationship (QSAR) studies to understand the drug-receptor interactions and help in the design of more effective analogs. Extensive application was also reported on the application of 3D-QSAR techniques, such as, Comparative Molecular Field Analysis (CoMFA), Comparative Molecular Similarity Analysis (CoMSIA), pharmacophore generation using Catalyst/HypoGen, free-energy binding analysis, GRID/GOLPE, HINT-based techniques, etc. in anti-HIV-1 drug discovery programs in academia and industry. We have attempted to put together a comprehensive overview on the 3D-QSAR applications in anti-HIV-1 drug design reported in the literature during the last decade.

  8. Novel TOPP descriptors in 3D-QSAR analysis of apoptosis inducing 4-aryl-4H-chromenes: comparison versus other 2D- and 3D-descriptors.

    PubMed

    Sciabola, Simone; Carosati, Emanuele; Cucurull-Sanchez, Lourdes; Baroni, Massimo; Mannhold, Raimund

    2007-10-01

    Novel 3D-descriptors using Triplets Of Pharmacophoric Points (TOPP) were evaluated in QSAR-studies on 80 apoptosis-inducing 4-aryl-4H-chromenes. A predictive QSAR model was obtained using PLS, confirmed by means of internal and external validations. Performance of the TOPP approach was compared with that of other 2D- and 3D-descriptors; statistical analysis indicates that TOPP descriptors perform best. A ranking of TOPP>GRIND>BCI 4096=ECFP>FCFP>GRID-GOLPE>DRAGON>MDL 166 was achieved. Finally, in a 'consensus' analysis predictions obtained using the single methods were compared with an average approach using six out of eight methods. The use of the average is statistically superior to the single methods. Beyond it, the use of several methods can help to easily investigate the presence/absence of outliers according to the 'consensus' of the predicted values: agreement among all the methods indicates a precise prediction, whereas large differences between predicted values (for the same compounds by different methods) would demand caution when using such predictions.

  9. Receptor-based 3D-QSAR in Drug Design: Methods and Applications in Kinase Studies.

    PubMed

    Fang, Cheng; Xiao, Zhiyan

    2016-01-01

    Receptor-based 3D-QSAR strategy represents a superior integration of structure-based drug design (SBDD) and three-dimensional quantitative structure-activity relationship (3D-QSAR) analysis. It combines the accurate prediction of ligand poses by the SBDD approach with the good predictability and interpretability of statistical models derived from the 3D-QSAR approach. Extensive efforts have been devoted to the development of receptor-based 3D-QSAR methods and two alternative approaches have been exploited. One associates with computing the binding interactions between a receptor and a ligand to generate structure-based descriptors for QSAR analyses. The other concerns the application of various docking protocols to generate optimal ligand poses so as to provide reliable molecular alignments for the conventional 3D-QSAR operations. This review highlights new concepts and methodologies recently developed in the field of receptorbased 3D-QSAR, and in particular, covers its application in kinase studies.

  10. Vascular endothelial growth factor receptor-2 (VEGFR-2) inhibitors: development and validation of predictive 3-D QSAR models through extensive ligand- and structure-based approaches

    NASA Astrophysics Data System (ADS)

    Ragno, Rino; Ballante, Flavio; Pirolli, Adele; Wickersham, Richard B.; Patsilinakos, Alexandros; Hesse, Stéphanie; Perspicace, Enrico; Kirsch, Gilbert

    2015-08-01

    Vascular endothelial growth factor receptor-2, (VEGFR-2), is a key element in angiogenesis, the process by which new blood vessels are formed, and is thus an important pharmaceutical target. Here, 3-D quantitative structure-activity relationship (3-D QSAR) were used to build a quantitative screening and pharmacophore model of the VEGFR-2 receptors for design of inhibitors with improved activities. Most of available experimental data information has been used as training set to derive optimized and fully cross-validated eight mono-probe and a multi-probe quantitative models. Notable is the use of 262 molecules, aligned following both structure-based and ligand-based protocols, as external test set confirming the 3-D QSAR models' predictive capability and their usefulness in design new VEGFR-2 inhibitors. From a survey on literature, this is the first generation of a wide-ranging computational medicinal chemistry application on VEGFR2 inhibitors.

  11. 3-D QSARS FOR RANKING AND PRIORITIZATION OF LARGE CHEMICAL DATASETS: AN EDC CASE STUDY

    EPA Science Inventory

    The COmmon REactivity Pattern (COREPA) approach is a three-dimensional structure activity (3-D QSAR) technique that permits identification and quantification of specific global and local steroelectronic characteristics associated with a chemical's biological activity. It goes bey...

  12. 3D-QSAR and virtual screening studies of thiazolidine-2,4-dione analogs: Validation of experimental inhibitory potencies towards PIM-1 kinase

    NASA Astrophysics Data System (ADS)

    Asati, Vivek; Bharti, Sanjay Kumar; Budhwani, Ashok Kumar

    2017-04-01

    The proviral insertion site in moloney murine leukemia virus (PIM) is a family of serine/threonine kinase of Ca2+-calmodulin-dependent protein kinase (CAMK) group which is responsible for the activation and regulation of cellular transcription and translation. The three isoforms of PIM kinase (PIM-1, PIM-2 and PIM-3) share high homology and functional idleness are widely expressed and involved in a variety of biological processes including cell survival, proliferation, differentiation and apoptosis. Altered expression of PIM-1 kinase correlated with hematologic malignancies and solid tumors. In the present study, atom-based 3D-QSAR, docking and virtual screening studies have been performed on a series of thiazolidine-2,4-dione derivatives as PIM-1 kinase inhibitors. 3D-QSAR and docking approach has shortlisted the most active thiazolidine-2,4-dione derivatives such as 28, 31, 33 and 35 with the incorporation of more than one structural feature in a single molecule. External validations by various parameters and molecular docking studies at the active site of PIM-1 kinase have proved the reliability of the developed 3D-QSAR model. The generated pharmacophore (AADHR.33) from 3D-QSAR study was used for screening of drug like compounds from ZINC database, where ZINC15056464 and ZINC83292944 showed potential binding affinities at the active site amino acid residues (LYS67, GLU171, ASP128 and ASP186) of PIM-1 kinase (PDB ID: "pdb:4DTK").

  13. An alignment independent 3D QSAR study of the antiproliferative activity of 1,2,4,5-tetraoxanes.

    PubMed

    Cvijetić, Ilija N; Zizak, Zeljko P; Stanojković, Tatjana P; Juranić, Zorica D; Terzić, Natasa; Opsenica, Igor M; Opsenica, Dejan M; Juranić, Ivan O; Drakulić, Branko J

    2010-10-01

    An alignment-free 3D QSAR study on antiproliferative activity of the thirty-three 1,2,4,5-tetraoxane derivatives toward two human dedifferentiated cell lines was reported. GRIND methodology, where descriptors are derived from GRID molecular interaction fields (MIF), were used. It was found that pharmacophoric pattern attributed to the most potent derivatives include amido NH of the primary or secondary amide, and the acetoxy fragments at positions 7 and 12 of steroid core which are, along with the tetraoxane ring, common for all studied compounds. Independently, simple multiple regression model obtained by using the whole-molecular properties, confirmed that the hydrophobicity and the H-bond donor properties are the main parameters influencing potency of compounds toward human cervix carcinoma (HeLa) and human malignant melanoma (FemX) cell lines. Corollary, similar structural motifs are found to be important for the potency toward both examined cell lines.

  14. 3D Pharmacophore, hierarchical methods, and 5-HT4 receptor binding data.

    PubMed

    Varin, Thibault; Saettel, Nicolas; Villain, Jonathan; Lesnard, Aurelien; Dauphin, François; Bureau, Ronan; Rault, Sylvain

    2008-10-01

    5-Hydroxytryptamine subtype-4 (5-HT(4)) receptors have stimulated considerable interest amongst scientists and clinicians owing to their importance in neurophysiology and potential as therapeutic targets. A comparative analysis of hierarchical methods applied to data from one thousand 5-HT(4) receptor-ligand binding interactions was carried out. The chemical structures were described as chemical and pharmacophore fingerprints. The definitions of indices, related to the quality of the hierarchies in being able to distinguish between active and inactive compounds, revealed two interesting hierarchies with the Unity (1 active cluster) and pharmacophore fingerprints (4 active clusters). The results of this study also showed the importance of correct choice of metrics as well as the effectiveness of a new alternative of the Ward clustering algorithm named Energy (Minimum E-Distance method). In parallel, the relationship between these classifications and a previously defined 3D 5-HT(4) antagonist pharmacophore was established.

  15. Molecular docking and 3D-QSAR studies on gag peptide analogue inhibitors interacting with human cyclophilin A.

    PubMed

    Cui, Meng; Huang, Xiaoqin; Luo, Xiaomin; Briggs, James M; Ji, Ruyun; Chen, Kaixian; Shen, Jianhua; Jiang, Hualiang

    2002-11-21

    The interaction of a series gag peptide analogues with human cyclophilin A (hCypA) have been studied employing molecular docking and 3D-QSAR approaches. The Lamarckian Genetic Algorithm (LGA) and divide-and-conquer methods were applied to locate the binding orientations and conformations of the inhibitors interacting with hCypA. Good correlations between the calculated interaction free energies and experimental inhibitory activities suggest that the binding conformations of these inhibitors are reasonable. A novel interaction model was identified for inhibitors 11, 15, and 17 whose N-termini were modified by addition of the deaminovaline (Dav) group and the C-termini of 15 and 17 were modified by addition of a benzyl group. Accordingly, two new binding sites (sites A and D in Figure 1) were revealed, which show a strong correlation with inhibitor potency and thus can be used as a starting point for new inhibitor design. In addition, two predictive 3D-QSAR models were obtained by CoMFA and CoMSIA analyses based on the binding conformations derived from the molecular docking calculations. The reasonable r(cross)(2) (cross-validated) values 0.738 and 0.762 were obtained for CoMFA and CoMSIA models, respectively. The predictive ability of these models was validated by four peptide analogues test set. The CoMFA and CoMSIA field distributions are in general agreement with the structural characteristics of the binding groove of hCypA. This indicates the reasonableness of the binding model of the inhibitors with hCypA. Considering all these results together with the valuable clues of binding from references published recently, reasonable pharmacophore elements have been suggested, demonstrating that the 3D-QSAR models about peptide analogue inhibitors are expected to be further employed in predicting activities of the novel compounds for inhibiting hCypA.

  16. Virtual screening and rational drug design method using structure generation system based on 3D-QSAR and docking.

    PubMed

    Chen, H F; Dong, X C; Zen, B S; Gao, K; Yuan, S G; Panaye, A; Doucet, J P; Fan, B T

    2003-08-01

    An efficient virtual and rational drug design method is presented. It combines virtual bioactive compound generation with 3D-QSAR model and docking. Using this method, it is possible to generate a lot of highly diverse molecules and find virtual active lead compounds. The method was validated by the study of a set of anti-tumor drugs. With the constraints of pharmacophore obtained by DISCO implemented in SYBYL 6.8, 97 virtual bioactive compounds were generated, and their anti-tumor activities were predicted by CoMFA. Eight structures with high activity were selected and screened by the 3D-QSAR model. The most active generated structure was further investigated by modifying its structure in order to increase the activity. A comparative docking study with telomeric receptor was carried out, and the results showed that the generated structures could form more stable complexes with receptor than the reference compound selected from experimental data. This investigation showed that the proposed method was a feasible way for rational drug design with high screening efficiency.

  17. Discovery of new potent human protein tyrosine phosphatase inhibitors via pharmacophore and QSAR analysis followed by in silico screening.

    PubMed

    Taha, Mutasem O; Bustanji, Yasser; Al-Bakri, Amal G; Yousef, Al-Motassem; Zalloum, Waleed A; Al-Masri, Ihab M; Atallah, Naji

    2007-03-01

    A pharmacophoric model was developed for human protein tyrosine phosphatase 1B (h-PTP 1B) inhibitors utilizing the HipHop-REFINE module of CATALYST software. Subsequently, genetic algorithm and multiple linear regression analysis were employed to select an optimal combination of physicochemical descriptors and pharmacophore hypothesis that yield consistent QSAR equation of good predictive potential (r = 0.87,F-statistic = 69.13,r(BS)2 = 0.76,r(LOO)2 = 0.68). The validity of the QSAR equation and the associated pharmacophoric hypothesis was experimentally established by the identification of five new h-PTP 1B inhibitors retrieved from the National Cancer Institute (NCI) database.

  18. 3-D QSAR studies on histone deacetylase inhibitors. A GOLPE/GRID approach on different series of compounds.

    PubMed

    Ragno, Rino; Simeoni, Silvia; Valente, Sergio; Massa, Silvio; Mai, Antonello

    2006-01-01

    Docking simulation and three-dimensional quantitative structure-activity relationships (3D-QSARs) analyses were conducted on four series of HDAC inhibitors. The studies were performed using the GRID/GOLPE combination using structure-based alignment. Twelve 3-D QSAR models were derived and discussed. Compared to previous studies on similar inhibitors, the present 3-D QSAR investigation proved to be of higher statistical value, displaying for the best global model r2, q2, and cross-validated SDEP values of 0.94, 0.83, and 0.41, respectively. A comparison of the 3-D QSAR maps with the structural features of the binding site showed good correlation. The results of 3D-QSAR and docking studies validated each other and provided insight into the structural requirements for anti-HDAC activity. To our knowledge this is the first 3-D QSAR application on a broad molecular diversity training set of HDACIs.

  19. Pharmacophore identification and bioactivity prediction for triaminotriazine derivatives by electron conformational-genetic algorithm QSAR method.

    PubMed

    Saripinar, Emin; Geçen, Nazmiye; Sahin, Kader; Yanmaz, Ersin

    2010-09-01

    The electron conformational-genetic algorithm (EC-GA) method has been employed as a 4D-QSAR approach to reveal the pharmacophore (Pha) and to predict anticancer activity in the N-morpholino triaminotriazine derivatives. The electron conformational matrices of congruity (ECMCs) identified by electronic and structural parameters are constructed from data of conformational analysis and electronic structure calculation of molecules. Comparing the matrices, electron conformational submatrix of activity (ECSA, Pha) are revealed that are common for these compounds within a minimum tolerance. To predict the theoretical activity of training and test set and to select important variables for describing the activities, genetic algorithm and non-linear least square regression methods were applied. Regression coefficients were found 0.9708 for training and 0.9520 for test set.

  20. 3D Pharmacophoric Similarity improves Multi Adverse Drug Event Identification in Pharmacovigilance

    NASA Astrophysics Data System (ADS)

    Vilar, Santiago; Tatonetti, Nicholas P.; Hripcsak, George

    2015-03-01

    Adverse drugs events (ADEs) detection constitutes a considerable concern in patient safety and public health care. For this reason, it is important to develop methods that improve ADE signal detection in pharmacovigilance databases. Our objective is to apply 3D pharmacophoric similarity models to enhance ADE recognition in Offsides, a pharmacovigilance resource with drug-ADE associations extracted from the FDA Adverse Event Reporting System (FAERS). We developed a multi-ADE predictor implementing 3D drug similarity based on a pharmacophoric approach, with an ADE reference standard extracted from the SIDER database. The results showed that the application of our 3D multi-type ADE predictor to the pharmacovigilance data in Offsides improved ADE identification and generated enriched sets of drug-ADE signals. The global ROC curve for the Offsides ADE candidates ranked with the 3D similarity score showed an area of 0.7. The 3D predictor also allows the identification of the most similar drug that causes the ADE under study, which could provide hypotheses about mechanisms of action and ADE etiology. Our method is useful in drug development, screening potential adverse effects in experimental drugs, and in drug safety, applicable to the evaluation of ADE signals selected through pharmacovigilance data mining.

  1. 3D pharmacophoric similarity improves multi adverse drug event identification in pharmacovigilance.

    PubMed

    Vilar, Santiago; Tatonetti, Nicholas P; Hripcsak, George

    2015-03-06

    Adverse drugs events (ADEs) detection constitutes a considerable concern in patient safety and public health care. For this reason, it is important to develop methods that improve ADE signal detection in pharmacovigilance databases. Our objective is to apply 3D pharmacophoric similarity models to enhance ADE recognition in Offsides, a pharmacovigilance resource with drug-ADE associations extracted from the FDA Adverse Event Reporting System (FAERS). We developed a multi-ADE predictor implementing 3D drug similarity based on a pharmacophoric approach, with an ADE reference standard extracted from the SIDER database. The results showed that the application of our 3D multi-type ADE predictor to the pharmacovigilance data in Offsides improved ADE identification and generated enriched sets of drug-ADE signals. The global ROC curve for the Offsides ADE candidates ranked with the 3D similarity score showed an area of 0.7. The 3D predictor also allows the identification of the most similar drug that causes the ADE under study, which could provide hypotheses about mechanisms of action and ADE etiology. Our method is useful in drug development, screening potential adverse effects in experimental drugs, and in drug safety, applicable to the evaluation of ADE signals selected through pharmacovigilance data mining.

  2. 3D-QSAR-Assisted Design, Synthesis, and Evaluation of Novobiocin Analogues

    PubMed Central

    2012-01-01

    Hsp90 is an attractive therapeutic target for the treatment of cancer. Extensive structural modifications to novobiocin, the first Hsp90 C-terminal inhibitor discovered, have produced a library of novobiocin analogues and revealed some structure–activity relationships. On the basis of the most potent novobiocin analogues generated from prior studies, a three-dimensional quantitative structure–activity (3D QSAR) model was built. In addition, a new set of novobiocin analogues containing various structural features supported by the 3D QSAR model were synthesized and evaluated against two breast cancer cell lines. Several new inhibitors produced antiproliferative activity at midnanomolar concentrations, which results through Hsp90 inhibition. PMID:23606927

  3. Predicting Novel Antitumor Agents: 3D-Pharmacophore Mapping of β-N-biaryl Ether Sulfonamide-Based Hydroxamates as Potentially MMP-2 Inhibitors.

    PubMed

    Medeiros Turra, Kely; Pineda Rivelli, Diogo; Berlanga de Moraes Barros, Silvia; Fernanda Mesquita Pasqualoto, Kerly

    2014-09-01

    Matrix metalloproteinases (MMP) are a group of enzymes related to extracelular matrix remodeling. Some types of MMP are overexpressed by malignant tumors, mainly the MMP-2 subtype, and have been associated to cancer invasiveness and metastasis. A receptor-independent (RI) 4D-QSAR formalism was applied, herein, to a set of forty β-N-biaryl ether sulfonamide hydroxamates, previously reported as potent MMP-2 inhibitors, in order to map 3D-pharmacophore models and predict novel antitumor agents. The best RI 4D-QSAR model was statistically significant (N=30, r(2) =0.93, q(2) =0.88, five occupancy descriptors (GCOD), LSE=0.04, LOF=0.11, outliers=0), robust and not obtained by chance. The external predictability was 75 % (test set; N=8). A different orientation (binding mode) in the MMP-2 catalytic site was suggested regarding the most hydrophobic portion (R1 ) of the compounds' structure. Compounds were predicted and their inhibitory activity against MMP-2 was calculated by using the optimum RI 4D-QSAR model. The findings have provided interesting information to drive the designing and synthesis of novel potentially MMP-2 inhibitors against melanoma invasion.

  4. Exploration of Novel Inhibitors for Bruton’s Tyrosine Kinase by 3D QSAR Modeling and Molecular Dynamics Simulation

    PubMed Central

    Choi, Light; Woo Lee, Keun

    2016-01-01

    Bruton’s tyrosine kinase (BTK) is a cytoplasmic, non-receptor tyrosine kinase which is expressed in most of the hematopoietic cells and plays an important role in many cellular signaling pathways. B cell malignancies are dependent on BCR signaling, thus making BTK an efficient therapeutic target. Over the last few years, significant efforts have been made in order to develop BTK inhibitors to treat B-cell malignancies, and autoimmunity or allergy/hypersensitivity but limited success has been achieved. Here in this study, 3D QSAR pharmacophore models were generated for Btk based on known IC50 values and experimental energy scores with extensive validations. The five features pharmacophore model, Hypo1, includes one hydrogen bond acceptor lipid, one hydrogen bond donor, and three hydrophobic features, which has the highest correlation coefficient (0.98), cost difference (112.87), and low RMS (1.68). It was further validated by the Fisher’s randomization method and test set. The well validated Hypo1 was used as a 3D query to search novel Btk inhibitors with different chemical scaffold using high throughput virtual screening technique. The screened compounds were further sorted by applying ADMET properties, Lipinski’s rule of five and molecular docking studies to refine the retrieved hits. Furthermore, molecular dynamic simulation was employed to study the stability of docked conformation and to investigate the binding interactions in detail. Several important hydrogen bonds with Btk were revealed, which includes the gatekeeper residues Glu475 and Met 477 at the hinge region. Overall, this study suggests that the proposed hits may be more effective inhibitors for cancer and autoimmune therapy. PMID:26784025

  5. Alignment-independent technique for 3D QSAR analysis.

    PubMed

    Wilkes, Jon G; Stoyanova-Slavova, Iva B; Buzatu, Dan A

    2016-04-01

    Molecular biochemistry is controlled by 3D phenomena but structure-activity models based on 3D descriptors are infrequently used for large data sets because of the computational overhead for determining molecular conformations. A diverse dataset of 146 androgen receptor binders was used to investigate how different methods for defining molecular conformations affect the performance of 3D-quantitative spectral data activity relationship models. Molecular conformations tested: (1) global minimum of molecules' potential energy surface; (2) alignment-to-templates using equal electronic and steric force field contributions; (3) alignment using contributions "Best-for-Each" template; (4) non-energy optimized, non-aligned (2D > 3D). Aggregate predictions from models were compared. Highest average coefficients of determination ranged from R Test (2) = 0.56 to 0.61. The best model using 2D > 3D (imported directly from ChemSpider) produced R Test (2) = 0.61. It was superior to energy-minimized and conformation-aligned models and was achieved in only 3-7 % of the time required using the other conformation strategies. Predictions averaged from models built on different conformations achieved a consensus R Test (2) = 0.65. The best 2D > 3D model was analyzed for underlying structure-activity relationships. For the compound strongest binding to the androgen receptor, 10 substructural features contributing to binding were flagged. Utility of 2D > 3D was compared for two other activity endpoints, each modeling a medium sized data set. Results suggested that large scale, accurate predictions using 2D > 3D SDAR descriptors may be produced for interactions involving endocrine system nuclear receptors and other data sets in which strongest activities are produced by fairly inflexible substrates.

  6. Alignment-independent technique for 3D QSAR analysis

    NASA Astrophysics Data System (ADS)

    Wilkes, Jon G.; Stoyanova-Slavova, Iva B.; Buzatu, Dan A.

    2016-04-01

    Molecular biochemistry is controlled by 3D phenomena but structure-activity models based on 3D descriptors are infrequently used for large data sets because of the computational overhead for determining molecular conformations. A diverse dataset of 146 androgen receptor binders was used to investigate how different methods for defining molecular conformations affect the performance of 3D-quantitative spectral data activity relationship models. Molecular conformations tested: (1) global minimum of molecules' potential energy surface; (2) alignment-to-templates using equal electronic and steric force field contributions; (3) alignment using contributions "Best-for-Each" template; (4) non-energy optimized, non-aligned (2D > 3D). Aggregate predictions from models were compared. Highest average coefficients of determination ranged from R Test 2 = 0.56 to 0.61. The best model using 2D > 3D (imported directly from ChemSpider) produced R Test 2 = 0.61. It was superior to energy-minimized and conformation-aligned models and was achieved in only 3-7 % of the time required using the other conformation strategies. Predictions averaged from models built on different conformations achieved a consensus R Test 2 = 0.65. The best 2D > 3D model was analyzed for underlying structure-activity relationships. For the compound strongest binding to the androgen receptor, 10 substructural features contributing to binding were flagged. Utility of 2D > 3D was compared for two other activity endpoints, each modeling a medium sized data set. Results suggested that large scale, accurate predictions using 2D > 3D SDAR descriptors may be produced for interactions involving endocrine system nuclear receptors and other data sets in which strongest activities are produced by fairly inflexible substrates.

  7. Free energy force field (FEFF) 3D-QSAR analysis of a set of Plasmodium falciparum dihydrofolate reductase inhibitors

    NASA Astrophysics Data System (ADS)

    Santos-Filho, Osvaldo A.; Mishra, Rama K.; Hopfinger, A. J.

    2001-09-01

    Free energy force field (FEFF) 3D-QSAR analysis was used to construct ligand-receptor binding models for a set of 18 structurally diverse antifolates including pyrimethamine, cycloguanil, methotrexate, aminopterin and trimethoprim, and 13 pyrrolo[2,3-d]pyrimidines. The molecular target (`receptor') used was a 3D-homology model of a specific mutant type of Plasmodium falciparum (Pf) dihydrofolate reductase (DHFR). The dependent variable of the 3D-QSAR models is the IC50 inhibition constant for the specific mutant type of PfDHFR. The independent variables of the 3D-QSAR models (the descriptors) are scaled energy terms of a modified first-generation AMBER force field combined with a hydration shell aqueous solvation model and a collection of 2D-QSAR descriptors often used in QSAR studies. Multiple temperature molecular dynamics simulation (MDS) and the genetic function approximation (GFA) were employed using partial least square (PLS) and multidimensional linear regressions as the fitting functions to develop FEFF 3D-QSAR models for the binding process. The significant FEFF energy terms in the best 3D-QSAR models include energy contributions of the direct ligand-receptor interaction. Some changes in conformational energy terms of the ligand due to binding to the enzyme are also found to be important descriptors. The FEFF 3D-QSAR models indicate some structural features perhaps relevant to the mechanism of resistance of the PfDHFR to current antimalarials. The FEFF 3D-QSAR models are also compared to receptor-independent (RI) 4D-QSAR models developed in an earlier study and subsequently refined using recently developed generalized alignment rules.

  8. Exploring QSAR, pharmacophore mapping and docking studies and virtual library generation for cycloguanil derivatives as PfDHFR-TS inhibitors.

    PubMed

    Ojha, Probir Kumar; Roy, Kunal

    2011-05-01

    Resistance of available antimalarial drugs against Plasmodium species is one of the major problems of malaria control in the developing world. In the present study, we have performed QSAR, pharmacophore mapping and molecular docking studies of cycloguanil derivatives as Plasmodium falciparum dihydrofolate reductase thymidylate synthase (PfDHFR-TS) inhibitors to explore essential features required for the antimalarial activity and important interaction patterns between the enzyme and ligands for the design of new potent PfDHFR-TS inhibitors. The QSAR studies have been carried out using topological parameters along with thermodynamic and structural descriptors. Acceptable values of internal and external validation parameters for the developed QSAR models confirm acceptability of the models. Pharmacophore mapping revealed that two hydrogen bond donor (HBD) features and a hydrophobic feature (HYD) are important parameters for PfDHFR-TS inhibitory activity. The docking studies suggest that the PfDHFR-TS inhibitors interact with Asp54, Ile14, Ile164, ser108, Ser111, Tyr170, Met55, Ala16, Thr185, Leu46, Cys15, Phe58, Ile112, Trp48, Tyr57 and Leu119 amino acid residues. The QSAR, pharmacophore and docking studies inferred that i) branching of the substituents at R1 and R2 positions should be less (small alkyl chain substituents are favored); ii) the electronegativity of the molecules should be high but within some limit; iii) the size and volume of the molecules should be high; iv) molecules should be flexible enough; v) R configuration at C6 position of the triazine ring favors the inhibitory binding affinity; vi) the substituents of the phenyl ring at 3, 4 and 5 position of the phenyl ring should be small hydrophobic groups. Based on these studies, we have designed a library of cycloguanil derivatives with good in silico predicted PfDHFR-TS inhibitory activity.

  9. Synthesis, in vitro antitubercular activity and 3D-QSAR study of 1,4-dihydropyridines.

    PubMed

    Manvar, Atul T; Pissurlenkar, Raghuvir R S; Virsodia, Vijay R; Upadhyay, Kuldip D; Manvar, Dinesh R; Mishra, Arun K; Acharya, Hrishikesh D; Parecha, Alpesh R; Dholakia, Chintan D; Shah, Anamik K; Coutinho, Evans C

    2010-05-01

    In continuation of our research program on new antitubercular agents, this article is a report of the synthesis of 97 various symmetrical, unsymmetrical, and N-substituted 1,4-dihydropyridines. The synthesized molecules were tested for their activity against M. tuberculosis H (37)Rv strain with rifampin as the standard drug. The percentage inhibition was found in the range 3-93%. In an effort to understand the relationship between structure and activity, 3D-QSAR studies were also carried out on a subset that is representative of the molecules synthesized. For the generation of the QSAR models, a training set of 35 diverse molecules representing the synthesized molecules was utilized. The molecules were aligned using the atom-fit technique. The CoMFA and CoMSIA models generated on the molecules aligned by the atom-fit method show a correlation coefficient (r (2)) of 0.98 and 0.95 with cross-validated r (2)(q (2)) of 0.56 and 0.62, respectively. The 3D-QSAR models were externally validated against a test set of 19 molecules (aligned previously with the training set) for which the predictive r(2)(r(r)(pred)) is recorded as 0.74 and 0.69 for the CoMFA and CoMSIA models, respectively. The models were checked for chance correlation through y-scrambling. The QSAR models revealed the importance of the conformational flexibility of the substituents in antitubercular activity.

  10. Chemical Structure-Biological Activity Models for Pharmacophores' 3D-Interactions.

    PubMed

    Putz, Mihai V; Duda-Seiman, Corina; Duda-Seiman, Daniel; Putz, Ana-Maria; Alexandrescu, Iulia; Mernea, Maria; Avram, Speranta

    2016-07-08

    Within medicinal chemistry nowadays, the so-called pharmaco-dynamics seeks for qualitative (for understanding) and quantitative (for predicting) mechanisms/models by which given chemical structure or series of congeners actively act on biological sites either by focused interaction/therapy or by diffuse/hazardous influence. To this aim, the present review exposes three of the fertile directions in approaching the biological activity by chemical structural causes: the special computing trace of the algebraic structure-activity relationship (SPECTRAL-SAR) offering the full analytical counterpart for multi-variate computational regression, the minimal topological difference (MTD) as the revived precursor for comparative molecular field analyses (CoMFA) and comparative molecular similarity indices analysis (CoMSIA); all of these methods and algorithms were presented, discussed and exemplified on relevant chemical medicinal systems as proton pump inhibitors belonging to the 4-indolyl,2-guanidinothiazole class of derivatives blocking the acid secretion from parietal cells in the stomach, the 1-[(2-hydroxyethoxy)-methyl]-6-(phenylthio)thymine congeners' (HEPT ligands) antiviral activity against Human Immunodeficiency Virus of first type (HIV-1) and new pharmacophores in treating severe genetic disorders (like depression and psychosis), respectively, all involving 3D pharmacophore interactions.

  11. Development of biologically active compounds by combining 3D QSAR and structure-based design methods

    NASA Astrophysics Data System (ADS)

    Sippl, Wolfgang

    2002-11-01

    One of the major challenges in computational approaches to drug design is the accurate prediction of the binding affinity of novel biomolecules. In the present study an automated procedure which combines docking and 3D-QSAR methods was applied to several drug targets. The developed receptor-based 3D-QSAR methodology was tested on several sets of ligands for which the three-dimensional structure of the target protein has been solved - namely estrogen receptor, acetylcholine esterase and protein-tyrosine-phosphatase 1B. The molecular alignments of the studied ligands were determined using the docking program AutoDock and were compared with the X-ray structures of the corresponding protein-ligand complexes. The automatically generated protein-based ligand alignment obtained was subsequently taken as basis for a comparative field analysis applying the GRID/GOLPE approach. Using GRID interaction fields and applying variable selection procedures, highly predictive models were obtained. It is expected that concepts from receptor-based 3D QSAR will be valuable tools for the analysis of high-throughput screening as well as virtual screening data

  12. Pharmacophore based drug design approach as a practical process in drug discovery.

    PubMed

    Gao, Qingzhi; Yang, Lulu; Zhu, Yongqiang

    2010-03-01

    This review summarizes the background and updated progress of pharmacophore based drug design and provides the fundamental approach strategies on both structure based and ligand based pharmacophore approaches. The different programs and methodologies enable the implementation of more accurate and sophisticated pharmacophore model generation and application in drug discovery. This review will discuss and illustrate their advantages in pharmacophore based virtual screening and exemplify the detailed application workflow, which can be easily utilized by pharmaceutical bench work medicinal chemists. Pharmacophore based drug design process includes pharmacophore modeling and validation; pharmacophore based virtual screening, virtual hits profiling and lead identification. Strategies and proven methodologies for pharmacophore modeling are described including common feature and 3D QSAR based pharmacophore generation as well as structure based pharmacophore development. Different virtual screening strategies will be described in this review with detailed case studies for supporting practical applications. Representative success examples of pharmacophore based virtual screening for lead generation will be collected to demonstrate capabilities.

  13. Design, synthesis and 3D-QSAR study of cytotoxic flavonoid derivatives.

    PubMed

    Ou, Lili; Han, Shuang; Ding, Wenbo; Chen, Zhe; Ye, Ziqi; Yang, Hongyu; Zhang, Goulin; Lou, Yijia; Chen, Jian-Zhong; Yu, Yongping

    2011-08-01

    Three series of flavonoid derivatives were designed and synthesized. All synthesized compounds were evaluated for cytotoxic activities against five human cancer cell lines, including K562, PC-3, MCF-7, A549, and HO8910. Among the compounds tested, compound 9 d exhibited the most potent cytotoxic activity with IC(50) values of 2.76-6.98 μM. Further comparative molecular field analysis was performed to conduct a 3D quantitative structure-activity relationship study. The generated 3D-QSAR model could be used for further rational design of novel flavonoid analogs as highly potent cytotoxic agents.

  14. Synthesis, biological evaluation and 3D-QSAR studies of novel 4,5-dihydro-1H-pyrazole niacinamide derivatives as BRAF inhibitors.

    PubMed

    Li, Cui-Yun; Li, Qing-Shan; Yan, Li; Sun, Xiao-Guang; Wei, Ran; Gong, Hai-Bin; Zhu, Hai-Liang

    2012-06-15

    A series of novel 4,5-dihydropyrazole derivatives containing niacinamide moiety as potential V600E mutant BRAF kinase (BRAF(V600E)) inhibitors were designed and synthesized. Results of the bioassays against BRAF(V600E) and WM266.4 human melanoma cell line showed several compounds to be endowed potent activities with IC(50) and GI(50) value in low micromolar range, among which compound 27e, (5-(4-Chlorophenyl)-3-(4-methoxyphenyl)-4,5-dihydro-1H-pyrazol-1-yl)6-methylpyridin-3-yl methanone (IC(50)=0.20 μM, GI(50)=0.89 μM) was bearing the best bioactivity comparable with the positive control Sorafenib. Docking simulation was performed to determine the probable binding model and 3D-QSAR model was built to provide more pharmacophore understanding that could use to design new agents with more potent BRAF(V600E) inhibitory activity.

  15. Quantitative bioactivity prediction and pharmacophore identification for benzotriazine derivatives using the electron conformational-genetic algorithm in QSAR.

    PubMed

    Sahin, K; Sarıpınar, E; Yanmaz, E; Geçen, N

    2011-06-01

    The electron conformational-genetic algorithm (EC-GA), a sophisticated hybrid approach combining the GA and EC methods, has been employed for a 4D-QSAR procedure to identify the pharmacophore for benzotriazines as sarcoma inhibitors and for quantitative prediction of activity. The calculated geometry and electronic structure parameters of every atom and bond of each molecule are arranged in a matrix described as the electron-conformational matrix of contiguity (ECMC). By comparing the ECMC of one of the most active compounds with other ECMCs we were able to obtain the features of the pharmacophore responsible for the activity, as submatrices of the template known as electron conformational submatrices of activity. The GA was used to select the most important descriptors and to predict the theoretical activity of training and test sets. The predictivity of the model was internally validated. The best QSAR model was selected, having r² = 0.9008, standard error = 0.0510 and cross-validated squared correlation coefficient, q² = 0.8192.

  16. 3D-QSAR and molecular docking studies on HIV protease inhibitors

    NASA Astrophysics Data System (ADS)

    Tong, Jianbo; Wu, Yingji; Bai, Min; Zhan, Pei

    2017-02-01

    In order to well understand the chemical-biological interactions governing their activities toward HIV protease activity, QSAR models of 34 cyclic-urea derivatives with inhibitory HIV were developed. The quantitative structure activity relationship (QSAR) model was built by using comparative molecular similarity indices analysis (CoMSIA) technique. And the best CoMSIA model has rcv2, rncv2 values of 0.586 and 0.931 for cross-validated and non-cross-validated. The predictive ability of CoMSIA model was further validated by a test set of 7 compounds, giving rpred2 value of 0.973. Docking studies were used to find the actual conformations of chemicals in active site of HIV protease, as well as the binding mode pattern to the binding site in protease enzyme. The information provided by 3D-QSAR model and molecular docking may lead to a better understanding of the structural requirements of 34 cyclic-urea derivatives and help to design potential anti-HIV protease molecules.

  17. Advantages and limitations of classic and 3D QSAR approaches in nano-QSAR studies based on biological activity of fullerene derivatives

    NASA Astrophysics Data System (ADS)

    Jagiello, Karolina; Grzonkowska, Monika; Swirog, Marta; Ahmed, Lucky; Rasulev, Bakhtiyor; Avramopoulos, Aggelos; Papadopoulos, Manthos G.; Leszczynski, Jerzy; Puzyn, Tomasz

    2016-09-01

    In this contribution, the advantages and limitations of two computational techniques that can be used for the investigation of nanoparticles activity and toxicity: classic nano-QSAR (Quantitative Structure-Activity Relationships employed for nanomaterials) and 3D nano-QSAR (three-dimensional Quantitative Structure-Activity Relationships, such us Comparative Molecular Field Analysis, CoMFA/Comparative Molecular Similarity Indices Analysis, CoMSIA analysis employed for nanomaterials) have been briefly summarized. Both approaches were compared according to the selected criteria, including: efficiency, type of experimental data, class of nanomaterials, time required for calculations and computational cost, difficulties in the interpretation. Taking into account the advantages and limitations of each method, we provide the recommendations for nano-QSAR modellers and QSAR model users to be able to determine a proper and efficient methodology to investigate biological activity of nanoparticles in order to describe the underlying interactions in the most reliable and useful manner.

  18. In Silico Drug-Designing Studies on Flavanoids as Anticolon Cancer Agents: Pharmacophore Mapping, Molecular Docking, and Monte Carlo Method-Based QSAR Modeling.

    PubMed

    Simon, Lalitha; Imane, Abdelli; Srinivasan, K K; Pathak, Lokesh; Daoud, I

    2016-04-08

    In silico molecular modeling studies were carried out on some newly synthesized flavanoid analogues. Search for potential targets for these compounds was performed using pharmacophore-mapping algorithm employing inverse screening of some representative compounds to a large set of pharmacophore models constructed from human target proteins. Further, molecular docking studies were carried out to assess binding affinity of these compounds to proteins mediating tumor growth. In vitro anticancer studies were carried out on colon cancer cell lines (HCT116) to assess validity of this approach for target identification of the new compounds. Further important structural features of compounds for anticolon cancer activity were assessed using Monte Carlo-based SMILES and hydrogen graph-Based QSAR studies. In conclusion this study have depicted successful and stepwise application of pharmacophore mapping, molecular docking, and QSAR studies in target identification and lead optimization of flavonoids.

  19. Synthesis and 3D-QSAR study of 1,4-dihydropyridine derivatives as MDR cancer reverters.

    PubMed

    Radadiya, Ashish; Khedkar, Vijay; Bavishi, Abhay; Vala, Hardevsinh; Thakrar, Shailesh; Bhavsar, Dhairya; Shah, Anamik; Coutinho, Evans

    2014-03-03

    A series of symmetrical and unsymmetrical 1,4-dihydropyridines were synthesized by a rapid, single pot microwave irradiation (MWI) based protocol along with conventional approach and characterized by NMR, IR and mass spectroscopic techniques. The compounds were evaluated for their tumor cell cytotoxicity in HL-60 tumor cells. A 3D-QSAR study using CoMFA and CoMSIA was carried out to decipher the factors governing MDR reversing ability in cancer. The resulting contour maps derived by the best 3D-QSAR models provide a good insight into the molecular features relevant to the biological activity in this series of analogs. 3D contour maps as a result of 3D-QSAR were utilized to identify some novel features that can be incorporated into the 1,4-dihydropyridine framework to enhance the activity.

  20. 3D QSAR models built on structure-based alignments of Abl tyrosine kinase inhibitors.

    PubMed

    Falchi, Federico; Manetti, Fabrizio; Carraro, Fabio; Naldini, Antonella; Maga, Giovanni; Crespan, Emmanuele; Schenone, Silvia; Bruno, Olga; Brullo, Chiara; Botta, Maurizio

    2009-06-01

    Quality QSAR: A combination of docking calculations and a statistical approach toward Abl inhibitors resulted in a 3D QSAR model, the analysis of which led to the identification of ligand portions important for affinity. New compounds designed on the basis of the model were found to have very good affinity for the target, providing further validation of the model itself.The X-ray crystallographic coordinates of the Abl tyrosine kinase domain in its active, inactive, and Src-like inactive conformations were used as targets to simulate the binding mode of a large series of pyrazolo[3,4-d]pyrimidines (known Abl inhibitors) by means of GOLD software. Receptor-based alignments provided by molecular docking calculations were submitted to a GRID-GOLPE protocol to generate 3D QSAR models. Analysis of the results showed that the models based on the inactive and Src-like inactive conformations had very poor statistical parameters, whereas the sole model based on the active conformation of Abl was characterized by significant internal and external predictive ability. Subsequent analysis of GOLPE PLS pseudo-coefficient contour plots of this model gave us a better understanding of the relationships between structure and affinity, providing suggestions for the next optimization process. On the basis of these results, new compounds were designed according to the hydrophobic and hydrogen bond donor and acceptor contours, and were found to have improved enzymatic and cellular activity with respect to parent compounds. Additional biological assays confirmed the important role of the selected compounds as inhibitors of cell proliferation in leukemia cells.

  1. Design, synthesis, and 3D QSAR of novel potent and selective aromatase inhibitors.

    PubMed

    Leonetti, Francesco; Favia, Angelo; Rao, Angela; Aliano, Rosaria; Paluszcak, Anja; Hartmann, Rolf W; Carotti, Angelo

    2004-12-30

    The design, synthesis, and biological evaluation of a series of new aromatase inhibitors bearing an imidazole or triazole ring linked to a fluorene (A), indenodiazine (B), or coumarin scaffold (C) are reported. Properly substituted coumarin derivatives displayed the highest aromatase inhibitory potency and selectivity over 17-alpha-hydroxylase/17-20 lyase. The modeling of the aromatase inhibition data by Comparative Molecular Field Analysis (CoMFA/GOLPE 3D QSAR approach) led to the development of a PLS model with good fitting and predictive powers (n = 22, ONC = 3, r(2) = 0.949, s = 0.216, and q(2) = 0.715). The relationship between aromatase inhibition and the steric and electrostatic fields generated by the examined azole inhibitors enables a clear understanding of the nature and spatial location of the main interactions modulating the aromatase inhibitory potency.

  2. 3D-QSAR and molecular modeling of HIV-1 integrase inhibitors

    NASA Astrophysics Data System (ADS)

    Makhija, Mahindra T.; Kulkarni, Vithal M.

    2002-03-01

    Three-dimensional quantitative structure-activity relationship (3D QSAR) methods were applied on a series of inhibitors of HIV-1 integrase with respect to their inhibition of 3'-processing and 3'-end joining steps in vitro.The training set consisted of 27 compounds belonging to the class of thiazolothiazepines. The predictive ability of each model was evaluated using test set I consisting of four thiazolothiazepines and test set II comprised of seven compounds belonging to an entirely different structural class of coumarins. Maximum Common Substructure (MCS) based method was used to align the molecules and this was compared with other known methods of alignment. Two methods of 3D QSAR: comparative molecular field analysis (CoMFA) and comparative molecular similarity indices analysis (CoMSIA) were analyzed in terms of their predictive abilities. CoMSIA produced significantly better results for all correlations. The results indicate a strong correlation between the inhibitory activity of these compounds and the steric and electrostatic fields around them. CoMSIA models with considerable internal as well as external predictive ability were obtained. A poor correlation obtained with hydrophobic field indicates that the binding of thiazolothiazepines to HIV-1 integrase is mainly enthalpic in nature. Further the most active compound of the series was docked into the active site using the crystal structure of integrase. The binding site was formed by the amino acid residues 64-67, 116, 148, 151-152, 155-156, and 159. The comparison of coefficient contour maps with the steric and electrostatic properties of the receptor shows high level of compatibility.

  3. Structure-based 3D QSAR and design of novel acetylcholinesterase inhibitors

    NASA Astrophysics Data System (ADS)

    Sippl, Wolfgang; Contreras, Jean-Marie; Parrot, Isabelle; Rival, Yveline M.; Wermuth, Camille G.

    2001-05-01

    The paper describes the construction, validation and application of a structure-based 3D QSAR model of novel acetylcholinesterase (AChE) inhibitors. Initial use was made of four X-ray structures of AChE complexed with small, non-specific inhibitors to create a model of the binding of recently developed aminopyridazine derivatives. Combined automated and manual docking methods were applied to dock the co-crystallized inhibitors into the binding pocket. Validation of the modelling process was achieved by comparing the predicted enzyme-bound conformation with the known conformation in the X-ray structure. The successful prediction of the binding conformation of the known inhibitors gave confidence that we could use our model to evaluate the binding conformation of the aminopyridazine compounds. The alignment of 42 aminopyridazine compounds derived by the docking procedure was taken as the basis for a 3D QSAR analysis applying the GRID/GOLPE method. A model of high quality was obtained using the GRID water probe, as confirmed by the cross-validation method (q2 LOO=0.937, q2 L50% O=0.910). The validated model, together with the information obtained from the calculated AChE-inhibitor complexes, were considered for the design of novel compounds. Seven designed inhibitors which were synthesized and tested were shown to be highly active. After performing our modelling study the X-ray structure of AChE complexed with donepezil, an inhibitor structurally related to the developed aminopyirdazines, has been made available. The good agreement found between the predicted binding conformation of the aminopyridazines and the one observed for donepezil in the crystal structure further supports our developed model.

  4. Aldose reductase inhibitors for diabetic complications: Receptor induced atom-based 3D-QSAR analysis, synthesis and biological evaluation.

    PubMed

    Vyas, Bhawna; Singh, Manjinder; Kaur, Maninder; Bahia, Malkeet Singh; Jaggi, Amteshwar Singh; Silakari, Om; Singh, Baldev

    2015-06-01

    Herein, atom-based 3D-QSAR analysis was performed using receptor-guided alignment of 46 flavonoid inhibitors of aldose reductase (ALR2) enzyme. 3D-QSAR models were generated in PHASE programme, and the best model corresponding to PLS factor four (QSAR4), was selected based on different statistical parameters (i.e., Rtrain(2), 0.96; Qtest(2) 0.81; SD, 0.26). The contour plots of different structural properties generated from the selected model were utilized for the designing of five new congener molecules. These designed molecules were duly synthesized, and evaluated for their in vitro ALR2 inhibitory activity that resulted in the micromolar (IC50<22μM) activity of all molecules. Thus, the newly designed molecules having ALR inhibitory potential could be employed for the management of diabetic complications.

  5. A Novel Approach for the Identification of Pharmacophores Through Differential Toxicity Analysis of Estrogen Receptor Positive and Negative Cell Lines

    DTIC Science & Technology

    2008-07-31

    Professor of Pharmacology and Toxicology at the University of Louisville’s James Graham Brown Cancer Center, along with significant startup package...appropriate size for developing pharmacophores for later 3-D QSAR modeling. Moreover, from a practical point, models of atom size 12 had roughly nearly...association of fragments (pharmacophores) to chemicals for QSAR analyses. For the MCF-7 - MDA-MB-231 models we selected compounds NSC 625587

  6. Molecular Modeling Studies of 11β-Hydroxysteroid Dehydrogenase Type 1 Inhibitors through Receptor-Based 3D-QSAR and Molecular Dynamics Simulations.

    PubMed

    Qian, Haiyan; Chen, Jiongjiong; Pan, Youlu; Chen, Jianzhong

    2016-09-19

    11β-Hydroxysteroid dehydrogenase type 1 (11β-HSD1) is a potential target for the treatment of numerous human disorders, such as diabetes, obesity, and metabolic syndrome. In this work, molecular modeling studies combining molecular docking, 3D-QSAR, MESP, MD simulations and free energy calculations were performed on pyridine amides and 1,2,4-triazolopyridines as 11β-HSD1 inhibitors to explore structure-activity relationships and structural requirement for the inhibitory activity. 3D-QSAR models, including CoMFA and CoMSIA, were developed from the conformations obtained by docking strategy. The derived pharmacophoric features were further supported by MESP and Mulliken charge analyses using density functional theory. In addition, MD simulations and free energy calculations were employed to determine the detailed binding process and to compare the binding modes of inhibitors with different bioactivities. The binding free energies calculated by MM/PBSA showed a good correlation with the experimental biological activities. Free energy analyses and per-residue energy decomposition indicated the van der Waals interaction would be the major driving force for the interactions between an inhibitor and 11β-HSD1. These unified results may provide that hydrogen bond interactions with Ser170 and Tyr183 are favorable for enhancing activity. Thr124, Ser170, Tyr177, Tyr183, Val227, and Val231 are the key amino acid residues in the binding pocket. The obtained results are expected to be valuable for the rational design of novel potent 11β-HSD1 inhibitors.

  7. Comparison of Different 2D and 3D-QSAR Methods on Activity Prediction of Histamine H3 Receptor Antagonists.

    PubMed

    Dastmalchi, Siavoush; Hamzeh-Mivehroud, Maryam; Asadpour-Zeynali, Karim

    2012-01-01

    Histamine H3 receptor subtype has been the target of several recent drug development programs. Quantitative structure-activity relationship (QSAR) methods are used to predict the pharmaceutically relevant properties of drug candidates whenever it is applicable. The aim of this study was to compare the predictive powers of three different QSAR techniques, namely, multiple linear regression (MLR), artificial neural network (ANN), and HASL as a 3D QSAR method, in predicting the receptor binding affinities of arylbenzofuran histamine H3 receptor antagonists. Genetic algorithm coupled partial least square as well as stepwise multiple regression methods were used to select a number of calculated molecular descriptors to be used in MLR and ANN-based QSAR studies. Using the leave-group-out cross-validation technique, the performances of the MLR and ANN methods were evaluated. The calculated values for the mean absolute percentage error (MAPE), ranging from 2.9 to 3.6, and standard deviation of error of prediction (SDEP), ranging from 0.31 to 0.36, for both MLR and ANN methods were statistically comparable, indicating that both methods perform equally well in predicting the binding affinities of the studied compounds toward the H3 receptors. On the other hand, the results from 3D-QSAR studies using HASL method were not as good as those obtained by 2D methods. It can be concluded that simple traditional approaches such as MLR method can be as reliable as those of more advanced and sophisticated methods like ANN and 3D-QSAR analyses.

  8. Combined 3D-QSAR modeling and molecular docking study on azacycles CCR5 antagonists

    NASA Astrophysics Data System (ADS)

    Ji, Yongjun; Shu, Mao; Lin, Yong; Wang, Yuanqiang; Wang, Rui; Hu, Yong; Lin, Zhihua

    2013-08-01

    The beta chemokine receptor 5 (CCR5) is an attractive target for pharmaceutical industry in the HIV-1, inflammation and cancer therapeutic areas. In this study, we have developed quantitative structure activity relationship (QSAR) models for a series of 41 azacycles CCR5 antagonists using comparative molecular field analysis (CoMFA), comparative molecular similarity indices analysis (CoMSIA), and Topomer CoMFA methods. The cross-validated coefficient q2 values of 3D-QASR (CoMFA, CoMSIA, and Topomer CoMFA) methods were 0.630, 0.758, and 0.852, respectively, the non-cross-validated R2 values were 0.979, 0.978, and 0.990, respectively. Docking studies were also employed to determine the most probable binding mode. 3D contour maps and docking results suggested that bulky groups and electron-withdrawing groups on the core part would decrease antiviral activity. Furthermore, docking results indicated that H-bonds and π bonds were favorable for antiviral activities. Finally, a set of novel derivatives with predicted activities were designed.

  9. 3D-QSAR and docking studies of pentacycloundecylamines at the sigma-1 (σ1) receptor.

    PubMed

    Geldenhuys, Werner J; Novotny, Nicholas; Malan, Sarel F; Van der Schyf, Cornelis J

    2013-03-15

    Pentacycloundecylamine (PCU) derived compounds have been shown to be promising lead structures for the development of novel drug candidates aimed at a variety of neurodegenerative and psychiatric diseases. Here we show for the first time a 3D quantitative structure-activity relationship (3D-QSAR) for a series of aza-PCU-derived compounds with activity at the sigma-1 (σ1) receptor. A comparative molecular field analysis (CoMFA) model was developed with a partial least squares cross validated (q(2)) regression value of 0.6, and a non-cross validated r(2) of 0.9. The CoMFA model was effective at predicting the sigma-1 activities of a test set with an r(2) >0.7. We also describe here the docking of the PCU-derived compounds into a homology model of the sigma-1 (σ1) receptor, which was developed to gain insight into binding of these cage compounds to the receptor. Based on docking studies we evaluated in a [(3)H]pentazocine binding assay an oxa-PCU, NGP1-01 (IC50=1.78μM) and its phenethyl derivative (IC50=1.54μM). Results from these studies can be used to develop new compounds with specific affinity for the sigma-1(σ1) receptor.

  10. Computer Aided Drug Design for Multi-Target Drug Design: SAR /QSAR, Molecular Docking and Pharmacophore Methods.

    PubMed

    Abdolmaleki, Azizeh; Ghasemi, Jahan B; Ghasemi, Fatemeh

    2017-01-01

    Multi-target drugs against particular multiple targets get better protection, resistance profiles and curative influence by cooperative rules of a key beneficial target with resistance behavior and compensatory elements. Computational techniques can assist us in the efforts to design novel drugs (ligands) with a preferred bioactivity outline and alternative bioactive molecules at an early stage. A number of in silico methods have been explored extensively in order to facilitate the investigation of individual target agents and to propose a selective drug. A different, progressively more significant field which is used to predict the bioactivity of chemical compounds is the data mining method. Some of the previously mentioned methods have been investigated for multi-target drug design (MTDD) to find drug leads interact simultaneously with multiple targets. Several cheminformatics methods and structure-based approaches try to extract information from units working cooperatively in a biomolecular system to fulfill their task. To dominate the difficulties of the experimental specification of ligand-target structures, rational methods, namely molecular docking, SAR and QSAR are vital substitutes to obtain knowledge for each structure in atomic insight. These procedures are logically successful for the prediction of binding affinity and have shown promising potential in facilitating MTDD. Here, we review some of the important features of the multi-target therapeutics discoveries using the computational approach, highlighting the SAR, QSAR, docking and pharmacophore methods to discover interactions between drug-target that could be leveraged for curative benefits. A summary of each, followed by examples of its applications in drug design has been provided. Computational efficiency of each method has been represented according to its main strengths and limitations.

  11. 3D-QSAR studies on chromone derivatives as HIV-1 protease inhibitors

    NASA Astrophysics Data System (ADS)

    Ungwitayatorn, Jiraporn; Samee, Weerasak; Pimthon, Jutarat

    2004-02-01

    The three-dimensional quantitative structure-activity relationship (3D-QSAR) approach using comparative molecular field analysis (CoMFA) and comparative molecular similarity indices analysis (CoMSIA) was applied to a series of 30 chromone derivatives, a new class of HIV-1 protease inhibitors. The best predictive CoMFA model gives cross-validated r2 ( q2)=0.763, non-cross-validated r2=0.967, standard error of estimate ( S)=5.092, F=90.701. The best CoMSIA model has q2=0.707, non-cross-validated r2=0.943, S=7.018, F=51.734, included steric, electrostatic, hydrophobic, and hydrogen bond donor fields. The predictive ability of these models was validated by a set of five compounds that were not included in the training set. The calculated (predicted) and experimental inhibitory activities were well correlated. The contour maps obtained from CoMFA and CoMSIA models were in agreement with the previous docking study for this chromone series.

  12. Pyridones as NNRTIs against HIV-1 mutants: 3D-QSAR and protein informatics

    NASA Astrophysics Data System (ADS)

    Debnath, Utsab; Verma, Saroj; Jain, Surabhi; Katti, Setu B.; Prabhakar, Yenamandra S.

    2013-07-01

    CoMFA and CoMSIA based 3D-QSAR of HIV-1 RT wild and mutant (K103, Y181C, and Y188L) inhibitory activities of 4-benzyl/benzoyl pyridin-2-ones followed by protein informatics of corresponding non-nucleoside inhibitors' binding pockets from pdbs 2BAN, 3MED, 1JKH, and 2YNF were analysed to discover consensus features of the compounds for broad-spectrum activity. The CoMFA/CoMSIA models indicated that compounds with groups which lend steric-cum-electropositive fields in the vicinity of C5, hydrophobic field in the vicinity of C3 of pyridone region and steric field in aryl region produce broad-spectrum anti-HIV-1 RT activity. Also, a linker rendering electronegative field between pyridone and aryl moieties is common requirement for the activities. The protein informatics showed considerable alteration in residues 181 and 188 characteristics on mutation. Also, mutants' isoelectric points shifted in acidic direction. The study offered fresh avenues for broad-spectrum anti-HIV-1 agents through designing new molecules seeded with groups satisfying common molecular fields and concerns of mutating residues.

  13. 3D-QSAR study of hallucinogenic phenylalkylamines by using CoMFA approach

    NASA Astrophysics Data System (ADS)

    Zhang, Zhuoyong; An, Liying; Hu, Wenxiang; Xiang, Yuhong

    2007-04-01

    The three-dimensional quantitative structure-activity relationship (3D-QSAR) has been studied on 90 hallucinogenic phenylalkylamines by the comparative molecular field analysis (CoMFA). Two conformations were compared during the modeling. Conformation I referred to the amino group close to ring position 6 and conformation II related to the amino group trans to the phenyl ring. Satisfactory results were obtained by using both conformations. There were still differences between the two models. The model based on conformation I got better statistical results than the one about conformation II. And this may suggest that conformation I be preponderant when the hallucinogenic phenylalkylamines interact with the receptor. To further confirm the predictive capability of the CoMFA model, 18 compounds with conformation I were randomly selected as a test set and the remaining ones as training set. The best CoMFA model based on the training set had a cross-validation coefficient q 2 of 0.549 at five components and non cross-validation coefficient R 2 of 0.835, the standard error of estimation was 0.219. The model showed good predictive ability in the external test with a coefficient R pre 2 of 0.611. The CoMFA coefficient contour maps suggested that both steric and electrostatic interactions play an important role. The contributions from the steric and electrostatic fields were 0.450 and 0.550, respectively.

  14. Docking and 3-D QSAR studies on the binding of tetrahydropyrimid-2-one HIV-1 protease inhibitors

    NASA Astrophysics Data System (ADS)

    Rao, Shashidhar N.; Balaji, Govardhan A.; Balaji, Vitukudi N.

    2013-06-01

    We present molecular docking and 3-D QSAR studies on a series of tetrahydropyrimid-2-one HIV-1 protease inhibitors whose binding affinities to the enzyme span nearly 6 orders of magnitude. The docking investigations have been carried out with Surflex (GEOM, GEOMX) and Glide (SP and XP) methodologies available through Tripos and Schrodinger suite of tools in the context of Sybyl-X and Maestro interfaces, respectively. The alignments for 3-D QSAR studies were obtained by using the automated Surflex-SIM methodology in Sybyl-X and the analyses were performed using the CoMFA and CoMSIA methods. Additionally, the top-ranked poses obtained from various docking protocols were also employed to generate CoMFA and CoMSIA models to evaluate the qualitative consistency of the docked models with experimental data. Our studies demonstrate that while there are a number of common features in the docked models obtained from Surflex-dock and Glide methodologies, the former sets of models are generally better correlated with deduced experimental binding modes based on the X-ray structures of known HIV-1 protease complexes with cyclic ureas. The urea moiety common to all the ligands are much more tightly aligned in Surflex docked structures than in the models obtained from Glide SP and XP dockings. The 3-D QSAR models are qualitatively and quantitatively similar to those previously reported, suggesting the utility of automatically generated alignments from Surflex-SIM methodology.

  15. Inhibitory mode of indole-2-carboxamide derivatives against HLGPa: molecular docking and 3D-QSAR analyses.

    PubMed

    Liu, Guixia; Zhang, Zhenshan; Luo, Xiaomin; Shen, Jianhua; Liu, Hong; Shen, Xu; Chen, Kaixian; Jiang, Hualiang

    2004-08-01

    The interaction of a series of indole-2-carboxamide compounds with human liver glycogen phosphorylase a (HLGPa) have been studied employing molecular docking and 3D-QSAR approaches. The Lamarckian Genetic Algorithm (LGA) of AutoDock 3.0 was employed to locate the binding orientations and conformations of the inhibitors interacting with HLGPa. The binding models were demonstrated in the aspects of inhibitor's conformation, subsite interaction, and hydrogen bonding. The very similar binding conformations of these inhibitors show that they interact with HLGPa in a very similar way. Good correlations between the calculated interaction free energies and experimental inhibitory activities suggest that the binding conformations of these inhibitors are reasonable. The structural and energetic differences in inhibitory potencies of indole-2-carboxamide compounds were reasonably explored. Using the binding conformations of indole-2-carboxamides, consistent and highly predictive 3D-QSAR models were developed by CoMFA and CoMSIA analyses. The q2 values are 0.697 and 0.622 for CoMFA and CoMSIA models, respectively. The predictive ability of these models was validated by four compounds that were not included in the training set. Mapping these models back to the topology of the active site of HLGPa leads to a better understanding of the vital indole-2-carboxamide-HLGPa interactions. Structure-based investigations and the final 3D-QSAR results provide clear guidelines and accurate activity predictions for novel inhibitor design.

  16. 2D- and 3D-QSAR studies of a series of benzopyranes and benzopyrano[3,4b][1,4]-oxazines as inhibitors of the multidrug transporter P-glycoprotein

    NASA Astrophysics Data System (ADS)

    Jabeen, Ishrat; Wetwitayaklung, Penpun; Chiba, Peter; Pastor, Manuel; Ecker, Gerhard F.

    2013-02-01

    The ATP-binding cassette efflux transporter P-glycoprotein (P-gp) is notorious for contributing to multidrug resistance in antitumor therapy. Due to its expression in many blood-organ barriers, it also influences the pharmacokinetics of drugs and drug candidates and is involved in drug/drug- and drug/nutrient interactions. However, due to lack of structural information the molecular basis of ligand/transporter interaction still needs to be elucidated. Towards this goal, a series of Benzopyranes and Benzopyrano[3,4b][1,4]oxazines have been synthesized and pharmacologically tested for their ability to inhibit P-gp mediated daunomycin efflux. Both quantitative structure-activity relationship (QSAR) models using simple physicochemical and novel GRID-independent molecular descriptors (GRIND) were established to shed light on the structural requirements for high P-gp inhibitory activity. The results from 2D-QSAR showed a linear correlation of vdW surface area (Å2) of hydrophobic atoms with the pharmacological activity. GRIND (3D-QSAR) studies allowed to identify important mutual distances between pharmacophoric features, which include one H-bond donor, two H-bond acceptors and two hydrophobic groups as well as their distances from different steric hot spots of the molecules. Activity of the compounds particularly increases with increase of the distance of an H-bond donor or a hydrophobic feature from a particular steric hot spot of the benzopyrane analogs.

  17. Quantitative studies on structure-ORAC relationships of anthocyanins from eggplant and radish using 3D-QSAR.

    PubMed

    Jing, Pu; Zhao, Shujuan; Ruan, Siyu; Sui, Zhongquan; Chen, Lihong; Jiang, Linlei; Qian, Bingjun

    2014-02-15

    The 3-dimensional quantitative structure activity relationship (3D-QSAR) models were established from 21 anthocyanins based on their oxygen radical absorbing capacity (ORAC) and were applied to predict anthocyanins in eggplant and radish for their ORAC values. The cross-validated q(2)=0.857/0.729, non-cross-validated r(2) = 0.958/0.856, standard error of estimate = 0.153/0.134, and F = 73.267/19.247 were for the best QSAR (CoMFA/CoMSIA) models, where the correlation coefficient r(2)pred = 0.998/0.997 (>0.6) indicated a high predictive ability for each. Additionally, the contour map results suggested that structural characteristics of anthocyanins favourable for the high ORAC. Four anthocyanins from eggplant and radish have been screened based on the QSAR models. Pelargonidin-3-[(6''-p-coumaroyl)-glucosyl(2 → 1)glucoside]-5-(6''-malonyl)-glucoside, delphinidin-3-rutinoside-5-glucoside, and delphinidin-3-[(4''-p-coumaroyl)-rhamnosyl(1 → 6)glucoside]-5-glucoside potential with high ORAC based the QSAR models were isolated and also confirmed for their relative high antioxidant ability, which might attribute to the bulky and/or electron-donating substituent at the 3-position in the C ring or/and hydrogen bond donor group/electron donating group on the R1 position in the B ring.

  18. Local indices for similarity analysis (LISA)-a 3D-QSAR formalism based on local molecular similarity.

    PubMed

    Verma, Jitender; Malde, Alpeshkumar; Khedkar, Santosh; Iyer, Radhakrishnan; Coutinho, Evans

    2009-12-01

    A simple quantitative structure activity relationship (QSAR) approach termed local indices for similarity analysis (LISA) has been developed. In this technique, the global molecular similarity is broken up as local similarity at each grid point surrounding the molecules and is used as a QSAR descriptor. In this way, a view of the molecular sites permitting favorable and rational changes to enhance activity is obtained. The local similarity index, calculated on the basis of Petke's formula, segregates the regions into "equivalent", "favored similar", and "disfavored similar" (alternatively "favored dissimilar") potentials with respect to a reference molecule in the data set. The method has been tested on three large and diverse data sets-thrombin, glycogen phosphorylase b, and thermolysin inhibitors. The QSAR models derived using genetic algorithm incorporated partial least square analysis statistics are found to be comparable to the ones obtained by the standard three-dimensional (3D)-QSAR methods, such as comparative molecular field analysis and comparative molecular similarity indices analysis. The graphical interpretation of the LISA models is straightforward, and the outcome of the models corroborates well with literature data. The LISA models give insight into the binding mechanisms of the ligand with the enzyme and allow fine-tuning of the molecules at the local level to improve their activity.

  19. 3-Heterocycle-phenyl N-alkylcarbamates as FAAH inhibitors: design, synthesis and 3D-QSAR studies.

    PubMed

    Käsnänen, Heikki; Myllymäki, Mikko J; Minkkilä, Anna; Kataja, Antti O; Saario, Susanna M; Nevalainen, Tapio; Koskinen, Ari M P; Poso, Antti

    2010-02-01

    Carbamates are a well-established class of fatty acid amide hydrolase (FAAH) inhibitors. Here we describe the synthesis of meta-substituted phenolic N-alkyl/aryl carbamates and their in vitro FAAH inhibitory activities. The most potent compound, 3-(oxazol-2yl)phenyl cyclohexylcarbamate (2 a), inhibited FAAH with a sub-nanomolar IC(50) value (IC(50)=0.74 nM). Additionally, we developed and validated three-dimensional quantitative structure-activity relationships (QSAR) models of FAAH inhibition combining the newly disclosed carbamates with our previously published inhibitors to give a total set of 99 compounds. Prior to 3D-QSAR modeling, the degree of correlation between FAAH inhibition and in silico reactivity was also established. Both 3D-QSAR methods used, CoMSIA and GRID/GOLPE, produced statistically significant models with coefficient of correlation for external prediction (R(2) (PRED)) values of 0.732 and 0.760, respectively. These models could be of high value in further FAAH inhibitor design.

  20. Docking, 3D-QSAR studies and in silico ADME prediction on c-Src tyrosine kinase inhibitors.

    PubMed

    Tintori, Cristina; Magnani, Matteo; Schenone, Silvia; Botta, Maurizio

    2009-03-01

    Docking simulations and three-dimensional quantitative structure-activity relationship (3D-QSAR) analysis were performed on a wide set of c-Src inhibitors. The study was conducted using a structure-based alignment and by applying the GRID/GOLPE approach. The present 3D-QSAR investigation proved to be of good statistical value, displaying r(2), q(2) and cross-validation SDEP values of 0.94, 0.84 and 0.42, respectively. Moreover, such a model also proved to be capable of predicting the activities of an external test set of compounds. The availability of the 3D structure of the target made possible the interpretation of steric and electrostatic maps within the binding site environment and provided useful insight into the structural requirements for inhibitory activity against c-Src. Two regions whose occupation by hydrophobic portions of ligands would favourably affect the activity were clearly identified. Moreover, hydrogen bond interactions involving residues Met343, Asp406 and Ser347 emerged as playing a key role in determining the affinity of the active inhibitors toward c-Src. Furthermore, the inhibitors bearing a basic nitrogen provided enhanced potency through protonation and salt bridge formation with Asp350. A preliminary pharmacokinetic profile of the molecules under analysis was also drawn on the basis of Volsurf predictions.

  1. Genotoxicity of quinolones: substituents contribution and transformation products QSAR evaluation using 2D and 3D models.

    PubMed

    Li, Min; Wei, Dongbin; Zhao, Huimin; Du, Yuguo

    2014-01-01

    The genotoxicity of 21 quinolones antibiotics was determined using SOS/umu assay. Some quinolones exhibited high genotoxicity, and the chemical substituent on quinolone ring significantly affected genotoxicity. To establish the relationship between genotoxicity and substituent, a 2D-QSAR model based on quantum chemical parameters was developed. Calculation suggested that both steric and electrostatic properties were correlated well with genotoxicity. Furthermore, the specific effect on three key active sites (1-, 7- and 8-positions) of quinolone ring was investigated using a 3D-QSAR (comparative molecular field analysis, CoMFA) method. From our modeling, the genotoxicity increased when substituents had: (1) big volume and/or positive charge at 1-position; (2) negative charge at 7-position; and (3) small volume and/or negative charge at 8-position. The developed QSAR models were applicable to estimate genotoxicity of quinolones antibiotics and their transformation products. It is noted that some of the transformation products exhibited higher genotoxicity comparing to their precursor (e.g., ciprofloxacin). This study provided an alternative way to understand the molecule genotoxicity of quinolones derivatives, as well as to evaluate their potential environmental risks.

  2. 3D-pharmacophore identification for kappa-opioid agonists using ligand-based drug-design techniques.

    PubMed

    Yamaotsu, Noriyuki; Hirono, Shuichi

    2011-01-01

    A selective kappa-opioid receptor (KOR) agonist might act as a powerful analgesic without the side effects of micro-opioid receptor-selective drugs such as morphine. The eight classes of known KOR agonists have different chemical structures, making it difficult to construct a pharmacophore model that takes them all into account. Here, we summarize previous efforts to identify the pharmacophore for kappa-opioid agonists and propose a new three-dimensional pharmacophore model that encompasses the kappa-activities of all classes. This utilizes conformational sampling of agonists by high-temperature molecular dynamics and pharmacophore extraction through a series of molecular superpositions.

  3. 3D-Pharmacophore Identification for κ-Opioid Agonists Using Ligand-Based Drug-Design Techniques

    NASA Astrophysics Data System (ADS)

    Yamaotsu, Noriyuki; Hirono, Shuichi

    A selective κ-opioid receptor (KOR) agonist might act as a powerful analgesic without the side effects of μ-opioid receptor-selective drugs such as morphine. The eight classes of known KOR agonists have different chemical structures, making it difficult to construct a pharmacophore model that takes them all into account. Here, we summarize previous efforts to identify the pharmacophore for κ-opioid agonists and propose a new three-dimensional pharmacophore model that encompasses the κ-activities of all classes. This utilizes conformational sampling of agonists by high-temperature molecular dynamics and pharmacophore extraction through a series of molecular superpositions.

  4. Development of a common 3D pharmacophore for δ-opioid recognition from peptides and non-peptides using a novel computer program

    NASA Astrophysics Data System (ADS)

    Huang, Ping; Kim, Susan; Loew, Gilda

    1997-01-01

    A unified three-dimensional (3D) pharmacophore for recognition of the δ-opioid receptorby families of structurally diverse δ-opioid ligands, including peptides and non-peptides,has been determined. An additional structural feature required for δ-selectivity was alsocharacterized using a subset of these ligands that are highly selective for the δ-opioidreceptor. To obtain these pharmacophores, we have used a recently developed computerprogram that performs systematic and automated comparisons of molecules to determinewhether any common 3D relationships exist among candidate recognition moieties in high-affinity analogs. All the low-energy conformations of each ligand are included in thesecomparisons. The program developed should be applicable in general to molecular super-imposition problems in rational drug design and to develop both 3D recognition and activationpharmacophores for any receptor for which high- and low-affinity analogs and agonists andantagonists have been identified.

  5. 4D-QSAR investigation and pharmacophore identification of pyrrolo[2,1-c][1,4]benzodiazepines using electron conformational-genetic algorithm method.

    PubMed

    Özalp, A; Yavuz, S Ç; Sabancı, N; Çopur, F; Kökbudak, Z; Sarıpınar, E

    2016-04-01

    In this paper, we present the results of pharmacophore identification and bioactivity prediction for pyrrolo[2,1-c][1,4]benzodiazepine derivatives using the electron conformational-genetic algorithm (EC-GA) method as 4D-QSAR analysis. Using the data obtained from quantum chemical calculations at PM3/HF level, the electron conformational matrices of congruity (ECMC) were constructed by EMRE software. The ECMC of the lowest energy conformer of the compound with the highest activity was chosen as the template and compared with the ECMCs of the lowest energy conformer of the other compounds within given tolerances to reveal the electron conformational submatrix of activity (ECSA, i.e. pharmacophore) by ECSP software. A descriptor pool was generated taking into account the obtained pharmacophore. To predict the theoretical activity and select the best subset of variables affecting bioactivities, the nonlinear least square regression method and genetic algorithm were performed. For four types of activity including the GI50, TGI, LC50 and IC50 of the pyrrolo[2,1-c][1,4] benzodiazepine series, the r(2)train, r(2)test and q(2) values were 0.858, 0.810, 0.771; 0.853, 0.848, 0.787; 0.703, 0.787, 0.600; and 0.776, 0.722, 0.687, respectively.

  6. Analysis of positions and substituents on genotoxicity of fluoroquinolones with quantitative structure-activity relationship and 3D Pharmacophore model.

    PubMed

    Fengxian, Chen; Reti, Hai

    2017-02-01

    The genotoxicity values of 21 quinolones were studied to establish a quantitative structure-activity relationship model and 3D Pharmacophore model separately for screening essential positions and substituents that contribute to genotoxicity of fluoroquinolones (FQs). A full factor experimental design was performed to analyze the specific main effect and second-order interaction effect of different positions and substituents on genotoxicity, forming a reasonable modification scheme which was validated on typical FQ with genotoxicity and efficacy data. Four positions (1, 5, 7, 8) were screened finally to form the full factorial experimental design which contained 72 congeners in total, illustrating that: the dominant effect of 5 and 7-positions on genotoxicity of FQs is main effect; meanwhile the effect of 1 and 8-positions is a second-order interaction effect; two adjacent positions always have stronger second-order interaction effect and lower genotoxicity; the obtained modification scheme had been validated on typical FQ congeners with the modified compound has a lower genotoxicity, higher synthesis feasibilities and efficacy.

  7. A structure-activity relationship study of catechol- O-methyltransferase inhibitors combining molecular docking and 3D QSAR methods

    NASA Astrophysics Data System (ADS)

    Tervo, Anu J.; Nyrönen, Tommi H.; Rönkkö, Toni; Poso, Antti

    2003-12-01

    A panel of 92 catechol- O-methyltransferase (COMT) inhibitors was used to examine the molecular interactions affecting their biological activity. COMT inhibitors are used as therapeutic agents in the treatment of Parkinson's disease, but there are limitations in the currently marketed compounds due to adverse side effects. This study combined molecular docking methods with three-dimensional structure-activity relationships (3D QSAR) to analyse possible interactions between COMT and its inhibitors, and to incite the design of new inhibitors. Comparative molecular field analysis (CoMFA) and GRID/GOLPE models were made by using bioactive conformations from docking experiments, which yielded q2 values of 0.594 and 0.636, respectively. The docking results, the COMT X-ray structure, and the 3D QSAR models are in agreement with each other. The models suggest that an interaction between the inhibitor's catechol oxygens and the Mg2+ ion in the COMT active site is important. Both hydrogen bonding with Lys144, Asn170 and Glu199, and hydrophobic contacts with Trp38, Pro174 and Leu198 influence inhibitor binding. Docking suggests that a large R1 substituent of the catechol ring can form hydrophobic contacts with side chains of Val173, Leu198, Met201 and Val203 on the COMT surface. Our models propose that increasing steric volume of e.g. the diethylamine tail of entacapone is favourable for COMT inhibitory activity.

  8. Comprehensive 3D-QSAR and binding mode of BACE-1 inhibitors using R-group search and molecular docking.

    PubMed

    Huang, Dandan; Liu, Yonglan; Shi, Bozhi; Li, Yueting; Wang, Guixue; Liang, Guizhao

    2013-09-01

    The β-enzyme (BACE), which takes an active part in the processing of amyloid precursor protein, thereby leads to the production of amyloid-β (Aβ) in the brain, is a major therapeutic target against Alzheimer's disease. The present study is aimed at studying 3D-QSAR of BACE-1 inhibitors and their binding mode. We build a 3D-QSAR model involving 99 training BACE-1 inhibitors based on Topomer CoMFA, and 26 molecules are employed to validate the external predictive power of the model obtained. The multiple correlation coefficients of fitting modeling, leave one out cross validation, and external validation are 0.966, 0.767 and 0.784, respectively. Topomer search is used as a tool for virtual screening in lead-like compounds of ZINC databases (2012); as a result, we successfully design 30 new molecules with higher activity than that of all training and test inhibitors. Besides, Surflex-dock is employed to explore binding mode of the inhibitors studied when acting with BACE-1 enzyme. The result shows that the inhibitors closely interact with the key sites related to ASP93, THR133, GLN134, ASP289, GLY291, THR292, THR293, ASN294, ARG296 and SER386 of BACE-1.

  9. Atom pair 2D-fingerprints perceive 3D-molecular shape and pharmacophores for very fast virtual screening of ZINC and GDB-17.

    PubMed

    Awale, Mahendra; Reymond, Jean-Louis

    2014-07-28

    Three-dimensional (3D) molecular shape and pharmacophores are important determinants of the biological activity of organic molecules; however, a precise computation of 3D-shape is generally too slow for virtual screening of very large databases. A reinvestigation of the concept of atom pairs initially reported by Carhart et al. and extended by Schneider et al. showed that a simple atom pair fingerprint (APfp) counting atom pairs at increasing topological distances in 2D-structures without atom property assignment correlates with various representations of molecular shape extracted from the 3D-structures. A related 55-dimensional atom pair fingerprint extended with atom properties (Xfp) provided an efficient pharmacophore fingerprint with good performance for ligand-based virtual screening such as the recovery of active compounds from decoys in DUD, and overlap with the ROCS 3D-pharmacophore scoring function. The APfp and Xfp data were organized for web-based extremely fast nearest-neighbor searching in ZINC (13.5 M compounds) and GDB-17 (50 M random subset) freely accessible at www.gdb.unibe.ch .

  10. 3D-QSAR and docking studies of flavonoids as potent Escherichia coli inhibitors

    PubMed Central

    Fang, Yajing; Lu, Yulin; Zang, Xixi; Wu, Ting; Qi, XiaoJuan; Pan, Siyi; Xu, Xiaoyun

    2016-01-01

    Flavonoids are potential antibacterial agents. However, key substituents and mechanism for their antibacterial activity have not been fully investigated. The quantitative structure-activity relationship (QSAR) and molecular docking of flavonoids relating to potent anti-Escherichia coli agents were investigated. Comparative molecular field analysis (CoMFA) and comparative molecular similarity indices analysis (CoMSIA) were developed by using the pIC50 values of flavonoids. The cross-validated coefficient (q2) values for CoMFA (0.743) and for CoMSIA (0.708) were achieved, illustrating high predictive capabilities. Selected descriptors for the CoMFA model were ClogP (logarithm of the octanol/water partition coefficient), steric and electrostatic fields, while, ClogP, electrostatic and hydrogen bond donor fields were used for the CoMSIA model. Molecular docking results confirmed that half of the tested flavonoids inhibited DNA gyrase B (GyrB) by interacting with adenosine-triphosphate (ATP) pocket in a same orientation. Polymethoxyl flavones, flavonoid glycosides, isoflavonoids changed their orientation, resulting in a decrease of inhibitory activity. Moreover, docking results showed that 3-hydroxyl, 5-hydroxyl, 7-hydroxyl and 4-carbonyl groups were found to be crucial active substituents of flavonoids by interacting with key residues of GyrB, which were in agreement with the QSAR study results. These results provide valuable information for structure requirements of flavonoids as antibacterial agents. PMID:27049530

  11. 3D-QSAR, molecular docking and molecular dynamics studies of a series of RORγt inhibitors.

    PubMed

    Wang, Fangfang; Yang, Wei; Shi, Yonghui; Le, Guowei

    2015-09-01

    The discovery of clinically relevant inhibitors of retinoic acid receptor-related orphan receptor-gamma-t (RORγt) for autoimmune diseases therapy has proven to be a challenging task. In the present work, to find out the structural features required for the inhibitory activity, we show for the first time a three-dimensional quantitative structure-activity relationship (3D-QSAR), molecular docking and molecular dynamics (MD) simulations for a series of novel thiazole/thiophene ketone amides with inhibitory activity at the RORγt receptor. The optimum CoMFA and CoMSIA models, derived from ligand-based superimposition I, exhibit leave-one-out cross-validated correlation coefficient (R(2)cv) of .859 and .805, respectively. Furthermore, the external predictive abilities of the models were evaluated by a test set, producing the predicted correlation coefficient (R(2)pred) of .7317 and .7097, respectively. In addition, molecular docking analysis was applied to explore the binding modes between the inhibitors and the receptor. MD simulation and MM/PBSA method were also employed to study the stability and rationality of the derived conformations, and the binding free energies in detail. The QSAR models and the results of molecular docking, MD simulation, binding free energies corroborate well with each other and further provide insights regarding the development of novel RORγt inhibitors with better activity.

  12. 3D-QSAR Studies on a Series of Dihydroorotate Dehydrogenase Inhibitors: Analogues of the Active Metabolite of Leflunomide

    PubMed Central

    Li, Shun-Lai; He, Mao-Yu; Du, Hong-Guang

    2011-01-01

    The active metabolite of the novel immunosuppressive agent leflunomide has been shown to inhibit the enzyme dihydroorotate dehydrogenase (DHODH). This enzyme catalyzes the fourth step in de novo pyrimidine biosynthesis. Self-organizing molecular field analysis (SOMFA), a simple three-dimensional quantitative structure-activity relationship (3D-QSAR) method is used to study the correlation between the molecular properties and the biological activities of a series of analogues of the active metabolite. The statistical results, cross-validated rCV2 (0.664) and non cross-validated r2 (0.687), show a good predictive ability. The final SOMFA model provides a better understanding of DHODH inhibitor-enzyme interactions, and may be useful for further modification and improvement of inhibitors of this important enzyme. PMID:21686163

  13. A class of novel Schiff's bases: Synthesis, therapeutic action for chronic pain, anti-inflammation and 3D QSAR analysis.

    PubMed

    Zhou, Yinjian; Zhao, Ming; Wu, Yingting; Li, Chunyu; Wu, Jianhui; Zheng, Meiqing; Peng, Li; Peng, Shiqi

    2010-03-15

    To discover analgesics for treating chronic pain 17 novel Schiff's bases, N,N'-(Z-allylidene-1,3-diyl)bisamino acid methyl esters were prepared from 1,1,3,3,-tetramethoxypropane and amino acid methyl esters. On tail-flick mouse model 20 micromol/kg of these Schiff's bases were orally administered, the analgesic action started 30 min after administration, reached the maximum 120 min after administration, and at 180 min this action was still observed. On a xylene-induced ear edema mouse model 20 micromol/kg of these Schiff's bases exhibited desirable anti-inflammation. Thus the present Schiff's bases are able to treat chronic pain from inflammation. The effect of the side chains of the amino acid residues of these Schiff's bases on the analgesic activity was explained with 3D QSAR.

  14. Elucidating the inhibiting mode of AHPBA derivatives against HIV-1 protease and building predictive 3D-QSAR models.

    PubMed

    Huang, Xaioqin; Xu, Liaosa; Luo, Xiaomin; Fan, Kangnian; Ji, Ruyun; Pei, Gang; Chen, Kaixian; Jiang, Hualiang

    2002-01-17

    The Lamarckian genetic algorithm of AutoDock 3.0 has been used to dock 27 3(S)-amino-2(S)-hydroxyl-4-phenylbutanoic acids (AHPBAs) into the active site of HIV-1 protease (HIVPR). The binding mode was demonstrated in the aspects of the inhibitor's conformation, subsite interaction, and hydrogen bonding. The data of geometrical parameters (tau(1), tau(2), and tau(3) listed in Table 2) and root mean square deviation values as compared with the known inhibitor, kni272,(28) show that both kinds of inhibitors interact with HIVPR in a very similar way. The r(2) value of 0.860 indicates that the calculated binding free energies correlate well with the inhibitory activities. The structural and energetic differences in inhibitory potencies of AHPBAs were reasonably explored. Using the binding conformations of AHPBAs, consistent and highly predictive 3D-QSAR models were developed by performing CoMFA, CoMSIA, and HQSAR analyses. The reasonable r(corss)(2) values were 0.613, 0.530, and 0.717 for CoMFA, CoMSIA, and HQSAR models, respectively. The predictive ability of these models was validated by kni272 and a set of nine compounds that were not included in the training set. Mapping these models back to the topology of the active site of HIVPR leads to a better understanding of vital AHPBA-HIVPR interactions. Structural-based investigations and the final 3D-QSAR results provide clear guidelines and accurate activity predictions for novel HIVPR inhibitors.

  15. Prediction and evaluation of the lipase inhibitory activities of tea polyphenols with 3D-QSAR models

    PubMed Central

    Li, Yi-Fang; Chang, Yi-Qun; Deng, Jie; Li, Wei-Xi; Jian, Jie; Gao, Jia-Suo; Wan, Xin; Gao, Hao; Kurihara, Hiroshi; Sun, Ping-Hua; He, Rong-Rong

    2016-01-01

    The extraordinary hypolipidemic effects of polyphenolic compounds from tea have been confirmed in our previous study. To gain compounds with more potent activities, using the conformations of the most active compound revealed by molecular docking, a 3D-QSAR pancreatic lipase inhibitor model with good predictive ability was established and validated by CoMFA and CoMISA methods. With good statistical significance in CoMFA (r2cv = 0.622, r2 = 0.956, F = 261.463, SEE = 0.096) and CoMISA (r2cv = 0.631, r2 = 0.932, F = 75.408, SEE = 0.212) model, we summarized the structure-activity relationship between polyphenolic compounds and pancreatic lipase inhibitory activities and find the bulky substituents in R2, R4 and R5, hydrophilic substituents in R1 and electron withdrawing groups in R2 are the key factors to enhance the lipase inhibitory activities. Under the guidance of the 3D-QSAR results, (2R,3R,2′R,3′R)-desgalloyloolongtheanin-3,3′-O-digallate (DOTD), a potent lipase inhibitor with an IC50 of 0.08 μg/ml, was obtained from EGCG oxidative polymerization catalyzed by crude polyphenol oxidase. Furthermore, DOTD was found to inhibit lipid absorption in olive oil-loaded rats, which was related with inhibiting the activities of lipase in the intestinal mucosa and contents. PMID:27694956

  16. 3D-QSAR and docking studies on 4-anilinoquinazoline and 4-anilinoquinoline epidermal growth factor receptor (EGFR) tyrosine kinase inhibitors

    NASA Astrophysics Data System (ADS)

    Assefa, Haregewein; Kamath, Shantaram; Buolamwini, John K.

    2003-08-01

    The overexpression and/or mutation of the epidermal growth factor receptor (EGFR) tyrosine kinase has been observed in many human solid tumors, and is under intense investigation as a novel anticancer molecular target. Comparative 3D-QSAR analyses using different alignments were undertaken employing comparative molecular field analysis (CoMFA) and comparative molecular similarity analysis (CoMSIA) for 122 anilinoquinazoline and 50 anilinoquinoline inhibitors of EGFR kinase. The SYBYL multifit alignment rule was applied to three different conformational templates, two obtained from a MacroModel Monte Carlo conformational search, and one from the bound conformation of erlotinib in complex with EGFR in the X-ray crystal structure. In addition, a flexible ligand docking alignment obtained with the GOLD docking program, and a novel flexible receptor-guided consensus dynamics alignment obtained with the DISCOVER program in the INSIGHTII modeling package were also investigated. 3D-QSAR models with q2 values up to 0.70 and r2 values up to 0.97 were obtained. Among the 4-anilinoquinazoline set, the q2 values were similar, but the ability of the different conformational models to predict the activities of an external test set varied considerably. In this regard, the model derived using the X-ray crystallographically determined bioactive conformation of erlotinib afforded the best predictive model. Electrostatic, hydrophobic and H-bond donor descriptors contributed the most to the QSAR models of the 4-anilinoquinazolines, whereas electrostatic, hydrophobic and H-bond acceptor descriptors contributed the most to the 4-anilinoquinoline QSAR, particularly the H-bond acceptor descriptor. A novel receptor-guided consensus dynamics alignment has also been introduced for 3D-QSAR studies. This new alignment method may incorporate to some extent ligand-receptor induced fit effects into 3D-QSAR models.

  17. The 3D Structure of the Binding Pocket of the Human Oxytocin Receptor for Benzoxazine Antagonists, Determined by Molecular Docking, Scoring Functions and 3D-QSAR Methods

    NASA Astrophysics Data System (ADS)

    Jójárt, Balázs; Martinek, Tamás A.; Márki, Árpád

    2005-05-01

    Molecular docking and 3D-QSAR studies were performed to determine the binding mode for a series of benzoxazine oxytocin antagonists taken from the literature. Structural hypotheses were generated by docking the most active molecule to the rigid receptor by means of AutoDock 3.05. The cluster analysis yielded seven possible binding conformations. These structures were refined by using constrained simulated annealing, and the further ligands were aligned in the refined receptor by molecular docking. A good correlation was found between the estimated Δ G bind and the p K i values for complex F. The Connolly-surface analysis, CoMFA and CoMSIA models q CoMFA 2 = 0.653, q CoMSA 2 = 0.630 and r pred,CoMFA 2 = 0.852 , r pred,CoMSIA 2 = 0.815) confirmed the scoring function results. The structural features of the receptor-ligand complex and the CoMFA and CoMSIA fields are in closely connected. These results suggest that receptor-ligand complex F is the most likely binding hypothesis for the studied benzoxazine analogs.

  18. Molecular docking and 3D-QSAR studies on the binding mechanism of statine-based peptidomimetics with beta-secretase.

    PubMed

    Zuo, Zhili; Luo, Xiaomin; Zhu, Weiliang; Shen, Jianhua; Shen, Xu; Jiang, Hualiang; Chen, Kaixian

    2005-03-15

    beta-Secretase is an important protease in the pathogenesis of Alzheimer's disease. Some statine-based peptidomimetics show inhibitory activities to the beta-secretase. To explore the inhibitory mechanism, molecular docking and three-dimensional quantitative structure-activity relationship (3D-QSAR) studies on these analogues were performed. The Lamarckian Genetic Algorithm (LGA) was applied to locate the binding orientations and conformations of the peptidomimetics with the beta-secretase. A good correlation between the calculated binding free energies and the experimental inhibitory activities suggests that the identified binding conformations of these potential inhibitors are reliable. Based on the binding conformations, highly predictive 3D-QSAR models were developed with q(2) values of 0.582 and 0.622 for CoMFA and CoMSIA, respectively. The predictive abilities of these models were validated by some compounds that were not included in the training set. Furthermore, the 3D-QSAR models were mapped back to the binding site of the beta-secretase, to get a better understanding of vital interactions between the statine-based peptidomimetics and the protease. Both the CoMFA and the CoMSIA field distributions are in well agreement with the structural characteristics of the binding groove of the beta-secretase. Therefore, the final 3D-QSAR models and the information of the inhibitor-enzyme interaction would be useful in developing new drug leads against Alzheimer's disease.

  19. Investigation of antigen-antibody interactions of sulfonamides with a monoclonal antibody in a fluorescence polarization immunoassay using 3D-QSAR models

    Technology Transfer Automated Retrieval System (TEKTRAN)

    A three-dimensional quantitative structure-activity relationship (3D-QSAR) model of sulfonamide analogs binding a monoclonal antibody (MAbSMR) produced against sulfamerazine was carried out by Distance Comparison (DISCOtech), comparative molecular field analysis (CoMFA), and comparative molecular si...

  20. A Structure-Activity Relationship Study of Imidazole-5-Carboxylic Acid Derivatives as Angiotensin II Receptor Antagonists Combining 2D and 3D QSAR Methods.

    PubMed

    Sharma, Mukesh C

    2016-03-01

    Two-dimensional (2D) and three-dimensional (3D) quantitative structure-activity relationship (QSAR) studies were performed for correlating the chemical composition of imidazole-5-carboxylic acid analogs and their angiotensin II [Formula: see text] receptor antagonist activity using partial least squares and k-nearest neighbor, respectively. For comparing the three different feature selection methods of 2D-QSAR, k-nearest neighbor models were used in conjunction with simulated annealing (SA), genetic algorithm and stepwise coupled with partial least square (PLS) showed variation in biological activity. The statistically significant best 2D-QSAR model having good predictive ability with statistical values of [Formula: see text] and [Formula: see text] was developed by SA-partial least square with the descriptors like [Formula: see text]count, 5Chain count, SdsCHE-index, and H-acceptor count, showing that increase in the values of these descriptors is beneficial to the activity. The 3D-QSAR studies were performed using the SA-PLS. A leave-one-out cross-validated correlation coefficient [Formula: see text] and predicate activity [Formula: see text] = 0.7226 were obtained. The information rendered by QSAR models may lead to a better understanding of structural requirements of substituted imidazole-5-carboxylic acid derivatives and also aid in designing novel potent antihypertensive molecules.

  1. 3D-QSAR Design of New Escitalopram Derivatives for the Treatment of Major Depressive Disorders

    PubMed Central

    Avram, Speranta; Buiu, Catalin; Duda-Seiman, Daniel M.; Duda-Seiman, Corina; Mihailescu, Dan

    2010-01-01

    Antidepressants are psychiatric agents used for the treatment of different types of depression being at present amongst the most commonly prescribed drug, while their effectiveness and adverse effects are the subject of many studies and competing claims. Having studied five QSAR models predicting the biological activities of 18 antidepressants, already approved for clinical treatment, in interaction with the serotonin transporter (SERT), we attempted to establish the membrane ions’ contributions (sodium, potassium, chlorine and calcium) supplied by donor/acceptor hydrogen bond character and electrostatic field to the antidepressant activity. Significant cross-validated correlation q2 (0.5–0.6) and the fitted correlation r2 (0.7–0.82) coefficients were obtained indicating that the models can predict the antidepressant activity of compounds. Moreover, considering the contribution of membrane ions (sodium, potassium and calcium) and hydrogen bond donor character, we have proposed a library of 24 new escitalopram structures, some of them probably with significantly improved antidepressant activity in comparison with the parent compound. PMID:21179345

  2. 3D-QSAR and docking studies on 1-hydroxypyridin-2-one compounds as mutant isocitrate dehydrogenase 1 inhibitors

    NASA Astrophysics Data System (ADS)

    Wang, Zhenya; Chang, Yiqun; Han, Yushui; Liu, Kangjia; Hou, Jinsong; Dai, Chengli; Zhai, Yuanhao; Guo, Jialiang; Sun, Pinghua; Lin, Jing; Chen, Weimin

    2016-11-01

    Mutation of isocitrate dehydrogenase 1 (IDH1) which is frequently found in certain cancers such as glioma, sarcoma and acute myeloid leukemia, has been proven to be a potent drug target for cancer therapy. In silico methodologies such as 3D-QSAR and molecular docking were performed to explore compounds with better mutant isocitrate dehydrogenase 1 (MIDH1) inhibitory activity using a series of 40 newly reported 1-hydroxypyridin-2-one compounds as MIDH1 inhibitors. The satisfactory CoMFA and CoMSIA models obtained after internal and external cross-validation gave q2 values of 0.691 and 0.535, r2 values of 0.984 and 0.936, respectively. 3D contour maps generated from CoMFA and CoMSIA along with the docking results provided information about the structural requirements for better MIDH1 inhibitory activity. Based on the structure-activity relationship, 17 new potent molecules with better predicted activity than the most active compound in the literature have been designed.

  3. 2D, 3D-QSAR and docking studies of 1,2,3-thiadiazole thioacetanilides analogues as potent HIV-1 non-nucleoside reverse transcriptase inhibitors

    PubMed Central

    2012-01-01

    Background The discovery of clinically relevant inhibitors of HIV-RT for antiviral therapy has proven to be a challenging task. To identify novel and potent HIV-RT inhibitors, the quantitative structure–activity relationship (QSAR) approach became very useful and largely widespread technique forligand-based drug design. Methods We perform the two- and three-dimensional (2D and 3D) QSAR studies of a series of 1,2,3-thiadiazole thioacetanilides analogues to elucidate the structural properties required for HIV-RT inhibitory activity. Results The 2D-QSAR studies were performed using multiple linear regression method, giving r2 = 0.97 and q2 = 0.94. The 3D-QSAR studies were performed using the stepwise variable selection k-nearest neighbor molecular field analysis approach; a leave-one-out cross-validated correlation coefficient q2 = 0.89 and a non-cross-validated correlation coefficient r2 = 0.97 were obtained. Docking analysis suggests that the new series have comparable binding affinity with the standard compounds. Conclusions This approach showed that hydrophobic and electrostatic effects dominantly determine binding affinities which will further useful for development of new NNRTIs. PMID:22691718

  4. CoMFA and CoMSIA 3D-QSAR analysis on hydroxamic acid derivatives as urease inhibitors.

    PubMed

    Ul-Haq, Zaheer-; Wadood, Abdul; Uddin, Reaz

    2009-02-01

    Urease (EC 3.5.1.5) serves as a virulence factor in pathogens that are responsible for the development of many diseases in humans and animals. Urease allows soil microorganisms to use urea as a source of nitrogen and aid in the rapid break down of urea-based fertilizers resulting in phytopathicity. It has been well established that hydroxamic acids are the potent inhibitors of urease activity. The 3D-QSAR studies on thirty five hydroxamic acid derivatives as known urease inhibitors were performed by Comparative Molecular Field Analysis (CoMFA) and Comparative Molecular Similarity Indices Analysis (CoMSIA) methods to determine the factors required for the activity of these compounds. The CoMFA model produced statistically significant results with cross-validated (q(2)) 0.532 and conventional (r(2)) correlation coefficients 0.969.The model indicated that the steric field (70.0%) has greater influence on hydroxamic acid inhibitors than the electrostatic field (30.0%). Furthermore, five different fields: steric, electrostatic, hydrophobic, H-bond donor and H-bond acceptor assumed to generate the CoMSIA model, which gave q(2) 0.665 and r(2) 0.976.This model showed that steric (43.0%), electrostatic (26.4%) and hydrophobic (20.3%) properties played a major role in urease inhibition. The analysis of CoMFA and CoMSIA contour maps provided insight into the possible modification of the hydroxamic acid derivatives for improved activity.

  5. 3D-QSAR and molecular docking studies of selective agonists for the thyroid hormone receptor beta.

    PubMed

    Du, Juan; Qin, Jin; Liu, Huanxiang; Yao, Xiaojun

    2008-09-01

    Three-dimensional quantitative structure-activity relationship (3D-QSAR) models were developed using comparative molecular field analysis (CoMFA) and comparative molecular similarity analysis (CoMSIA) on a series of agonists of thyroid hormone receptor beta (TRbeta), which may lead to safe therapies for non-thyroid disorders while avoiding the cardiac side effects. The reasonable q(2) (cross-validated) values 0.600 and 0.616 and non-cross-validated r(2) values of 0.974 and 0.974 were obtained for CoMFA and CoMSIA models for the training set compounds, respectively. The predictive ability of two models was validated using a test set of 12 molecules which gave predictive correlation coefficients (r(pred)(2)) of 0.688 and 0.674, respectively. The Lamarckian Genetic Algorithm (LGA) of AutoDock 4.0 was employed to explore the binding mode of the compound at the active site of TRbeta. The results not only lead to a better understanding of interactions between these agonists and the thyroid hormone receptor beta but also can provide us some useful information about the influence of structures on the activity which will be very useful for designing some new agonist with desired activity.

  6. Glycogen synthase kinase-3 inhibition by 3-anilino-4-phenylmaleimides: insights from 3D-QSAR and docking

    NASA Astrophysics Data System (ADS)

    Prasanna, Sivaprakasam; Daga, Pankaj R.; Xie, Aihua; Doerksen, Robert J.

    2009-02-01

    Glycogen synthase kinase-3, a serine/threonine kinase, has been implicated in a wide variety of pathological conditions such as diabetes, Alzheimer's disease, stroke, bipolar disorder, malaria and cancer. Herein we report 3D-QSAR analyses using CoMFA and CoMSIA and molecular docking studies on 3-anilino-4-phenylmaleimides as GSK-3α inhibitors, in order to better understand the mechanism of action and structure-activity relationship of these compounds. Comparison of the active site residues of GSK-3α and GSK-3β isoforms shows that all the key amino acids involved in polar interactions with the maleimides for the β isoform are the same in the α isoform, except that Asp133 in the β isoform is replaced by Glu196 in the α isoform. We prepared a homology model for GSK-3α, and showed that the change from Asp to Glu should not affect maleimide binding significantly. Docking studies revealed the binding poses of three subclasses of these ligands, namely anilino, N-methylanilino and indoline derivatives, within the active site of the β isoform, and helped to explain the difference in their inhibitory activity.

  7. Molecular docking and 3D-QSAR studies on the glucocorticoid receptor antagonistic activity of hydroxylated polychlorinated biphenyls.

    PubMed

    Liu, S; Luo, Y; Fu, J; Zhou, J; Kyzas, G Z

    2016-01-01

    The glucocorticoid receptor (GR) antagonistic activities of hydroxylated polychlorinated biphenyls (HO-PCBs) were recently characterised. To further explore the interactions between HO-PCBs and the GR, and to elucidate structural characteristics that influence the GR antagonistic activity of HO-PCBs, molecular docking and three-dimensional quantitative structure-activity relationship (3D-QSAR) studies were performed. Comparative molecular similarity indices analysis (CoMSIA) was performed using both ligand- and receptor-based alignment schemes. Results generated from the receptor-based model were found to be more satisfactory, with q(2) of 0.632 and r(2) of 0.931 compared with those from the ligand-based model. Some internal validation strategies (e.g. cross-validation analysis, bootstrapping analysis and Y-randomisation) and an external validation method were used respectively to further assess the stability and predictive ability of the derived model. Graphical interpretation of the model provided some insights into the structural features that affected the GR antagonistic activity of HO-PCBs. Molecular docking studies revealed that some key residues were critical for ligand-receptor interactions by forming hydrogen bonds (Glu540) and hydrophobic interactions with ligands (Ile539, Val543 and Trp577). Although CoMSIA sometimes depends on the alignment of the molecules, the information provided is beneficial for predicting the GR antagonistic activities of HO-PCB homologues and is helpful for understanding the binding mechanisms of HO-PCBs to GR.

  8. 3D-QSAR AND CONTOUR MAP ANALYSIS OF TARIQUIDAR ANALOGUES AS MULTIDRUG RESISTANCE PROTEIN-1 (MRP1) INHIBITORS

    PubMed Central

    Kakarla, Prathusha; Inupakutika, Madhuri; Devireddy, Amith R.; Gunda, Shravan Kumar; Willmon, Thomas Mark; Ranjana, KC; Shrestha, Ugina; Ranaweera, Indrika; Hernandez, Alberto J.; Barr, Sharla; Varela, Manuel F.

    2016-01-01

    One of the major obstacles to the successful chemotherapy towards several cancers is multidrug resistance of human cancer cells to anti-cancer drugs. An important contributor to multidrug resistance is the human multidrug resistance protein-1 transporter (MRP1), which is an efflux pump of the ABC (ATP binding cassette) superfamily. Thus, highly efficacious, third generation MRP1 inhibitors, like tariquidar analogues, are promising inhibitors of multidrug resistance and are under clinical trials. To maximize the efficacy of MRP1 inhibitors and to reduce systemic toxicity, it is important to limit the exposure of MRP1 inhibitors and anticancer drugs to normal tissues and to increase their co-localization with tumor cells. Comparative Molecular Field Analysis (CoMFA) and Comparative Molecular Similarity Indices Analysis (CoMSIA) associated with 3D-Quantitiative structure-activity relationship (3D-QSAR) studies were performed on a series of tariquidar analogues, as selective MDR modulators. Best predictability was obtained with CoMFA model r2(non-cross-validated square of correlation coefficient) = 0.968, F value = 151.768 with five components, standard error of estimate = 0.107 while the CoMSIA yielded r2 = 0.982, F value = 60.628 with six components, and standard error of estimate = 0.154. These results indicate that steric, electrostatic, hydrophobic (lipophilic), and hydrogen bond donor substituents play significant roles in multidrug resistance modulation of tariquidar analogues upon MRP1. The tariquidar analogue and MRP1 binding and stability data generated from CoMFA and CoMSIA based 3D–contour maps may further aid in study and design of tariquidar analogues as novel, potent and selective MDR modulator drug candidates. PMID:26913287

  9. Prediction of octanol-air partition coefficients for polychlorinated biphenyls (PCBs) using 3D-QSAR models.

    PubMed

    Chen, Ying; Cai, Xiaoyu; Jiang, Long; Li, Yu

    2016-02-01

    Based on the experimental data of octanol-air partition coefficients (KOA) for 19 polychlorinated biphenyl (PCB) congeners, two types of QSAR methods, comparative molecular field analysis (CoMFA) and comparative molecular similarity indices analysis (CoMSIA), are used to establish 3D-QSAR models using the structural parameters as independent variables and using logKOA values as the dependent variable with the Sybyl software to predict the KOA values of the remaining 190 PCB congeners. The whole data set (19 compounds) was divided into a training set (15 compounds) for model generation and a test set (4 compounds) for model validation. As a result, the cross-validation correlation coefficient (q(2)) obtained by the CoMFA and CoMSIA models (shuffled 12 times) was in the range of 0.825-0.969 (>0.5), the correlation coefficient (r(2)) obtained was in the range of 0.957-1.000 (>0.9), and the SEP (standard error of prediction) of test set was within the range of 0.070-0.617, indicating that the models were robust and predictive. Randomly selected from a set of models, CoMFA analysis revealed that the corresponding percentages of the variance explained by steric and electrostatic fields were 23.9% and 76.1%, respectively, while CoMSIA analysis by steric, electrostatic and hydrophobic fields were 0.6%, 92.6%, and 6.8%, respectively. The electrostatic field was determined as a primary factor governing the logKOA. The correlation analysis of the relationship between the number of Cl atoms and the average logKOA values of PCBs indicated that logKOA values gradually increased as the number of Cl atoms increased. Simultaneously, related studies on PCB detection in the Arctic and Antarctic areas revealed that higher logKOA values indicate a stronger PCB migration ability. From CoMFA and CoMSIA contour maps, logKOA decreased when substituents possessed electropositive groups at the 2-, 3-, 3'-, 5- and 6- positions, which could reduce the PCB migration ability. These results are

  10. Combined 3D-QSAR, molecular docking and molecular dynamics study on thyroid hormone activity of hydroxylated polybrominated diphenyl ethers to thyroid receptors β

    SciTech Connect

    Li, Xiaolin; Ye, Li; Wang, Xiaoxiang; Wang, Xinzhou; Liu, Hongling; Zhu, Yongliang; Yu, Hongxia

    2012-12-15

    Several recent reports suggested that hydroxylated polybrominated diphenyl ethers (HO-PBDEs) may disturb thyroid hormone homeostasis. To illuminate the structural features for thyroid hormone activity of HO-PBDEs and the binding mode between HO-PBDEs and thyroid hormone receptor (TR), the hormone activity of a series of HO-PBDEs to thyroid receptors β was studied based on the combination of 3D-QSAR, molecular docking, and molecular dynamics (MD) methods. The ligand- and receptor-based 3D-QSAR models were obtained using Comparative Molecular Similarity Index Analysis (CoMSIA) method. The optimum CoMSIA model with region focusing yielded satisfactory statistical results: leave-one-out cross-validation correlation coefficient (q{sup 2}) was 0.571 and non-cross-validation correlation coefficient (r{sup 2}) was 0.951. Furthermore, the results of internal validation such as bootstrapping, leave-many-out cross-validation, and progressive scrambling as well as external validation indicated the rationality and good predictive ability of the best model. In addition, molecular docking elucidated the conformations of compounds and key amino acid residues at the docking pocket, MD simulation further determined the binding process and validated the rationality of docking results. -- Highlights: ► The thyroid hormone activities of HO-PBDEs were studied by 3D-QSAR. ► The binding modes between HO-PBDEs and TRβ were explored. ► 3D-QSAR, molecular docking, and molecular dynamics (MD) methods were performed.

  11. Rigorous Incorporation of Tautomers, Ionization Species, and Different Binding Modes into Ligand-Based and Receptor-Based 3D-QSAR Methods

    PubMed Central

    Natesan, Senthil; Balaz, Stefan

    2013-01-01

    Speciation of drug candidates and receptors caused by ionization, tautomerism, and/or covalent hydration complicates ligand- and receptor-based predictions of binding affinities by 3-dimensional structure-activity relationships (3D-QSAR). The speciation problem is exacerbated by tendency of tautomers to bind in multiple conformations or orientations (modes) in the same binding site. New forms of the 3D-QSAR correlation equations, capable of capturing this complexity, can be developed using the time hierarchy of all steps that lie behind the monitored biological process – binding, enzyme inhibition or receptor activity. In most cases, reversible interconversions of individual ligand and receptor species can be treated as quickly established equilibria because they are finished in a small fraction of the exposure time that is used to determine biological effects. The speciation equilibria are satisfactorily approximated by invariant fractions of individual ligand and receptor species for buffered experimental or in vivo conditions. For such situations, the observed drug-receptor association constant of a ligand is expressed as the sum of products, for each ligand and receptor species pair, of the association microconstant and the fractions of involved species. For multiple binding modes, each microconstant is expressed as the sum of microconstants of individual modes. This master equation leads to new 3D-QSAR correlation equations integrating the results of all molecular simulations or calculations, which are run for each ligand-receptor species pair separately. The multispecies, multimode 3D-QSAR approach is illustrated by a ligand-based correlation of transthyretin binding of thyroxine analogs and by a receptor-based correlation of inhibition of MK2 by benzothiophenes and pyrrolopyrimidines. PMID:23170882

  12. Design of the influenza virus inhibitors targeting the PA endonuclease using 3D-QSAR modeling, side-chain hopping, and docking.

    PubMed

    Yan, Zhihui; Zhang, Lijie; Fu, Haiyang; Wang, Zhonghua; Lin, Jianping

    2014-01-15

    With the emergence of drug resistance and the structural determination of the PA N-terminal domain (PAN), influenza endonucleases have become an attractive target for antiviral therapies for influenza infection. Here, we combined 3D-QSAR with side-chain hopping and molecular docking to produce novel structures as endonuclease inhibitors. First, a new molecular library was generated with side-chain hopping on an existing template molecule, L-742001, using an in-house fragment library that targets bivalent-cation-binding proteins. Then, the best 3D-QSAR model (AAAHR.500), with q(2)=0.76 and r(2)=0.97 from phase modeling, was constructed from 23 endonuclease inhibitors and validated with 17 test compounds. The AAAHR.500 model was then used to select effective candidates from the new molecular library. Combining 3D-QSAR with docking using Glide and Autodock, 13 compounds were considered the most likely candidate inhibitors. Docking studies showed that the binding modes of these compounds were consistent with the crystal structures of known inhibitors. These compounds could serve as potential endonuclease inhibitors for further biological activity tests.

  13. Ligand-based 3D QSAR analysis of reactivation potency of mono- and bis-pyridinium aldoximes toward VX-inhibited rat acetylcholinesterase.

    PubMed

    Dolezal, Rafael; Korabecny, Jan; Malinak, David; Honegr, Jan; Musilek, Kamil; Kuca, Kamil

    2015-03-01

    To predict unknown reactivation potencies of 12 mono- and bis-pyridinium aldoximes for VX-inhibited rat acetylcholinesterase (rAChE), three-dimensional quantitative structure-activity relationship (3D QSAR) analysis has been carried out. Utilizing molecular interaction fields (MIFs) calculated by molecular mechanical (MMFF94) and quantum chemical (B3LYP/6-31G*) methods, two satisfactory ligand-based CoMFA models have been developed: 1. R(2)=0.9989, Q(LOO)(2)=0.9090, Q(LTO)(2)=0.8921, Q(LMO(20%))(2)=0.8853, R(ext)(2)=0.9259, SDEP(ext)=6.8938; 2. R(2)=0.9962, Q(LOO)(2)=0.9368, Q(LTO)(2)=0.9298, Q(LMO(20%))(2)=0.9248, R(ext)(2)=0.8905, SDEP(ext)=6.6756. High statistical significance of the 3D QSAR models has been achieved through the application of several data noise reduction techniques (i.e. smart region definition SRD, fractional factor design FFD, uninformative/iterative variable elimination UVE/IVE) on the original MIFs. Besides the ligand-based CoMFA models, an alignment molecular set constructed by flexible molecular docking has been also studied. The contour maps as well as the predicted reactivation potencies resulting from 3D QSAR analyses help better understand which structural features are associated with increased reactivation potency of studied compounds.

  14. Novel substituted benzothiophene and thienothiophene carboxanilides and quinolones: synthesis, photochemical synthesis, DNA-binding properties, antitumor evaluation and 3D-derived QSAR analysis.

    PubMed

    Aleksić, Maja; Bertoša, Branimir; Nhili, Raja; Uzelac, Lidija; Jarak, Ivana; Depauw, Sabine; David-Cordonnier, Marie-Hélène; Kralj, Marijeta; Tomić, Sanja; Karminski-Zamola, Grace

    2012-06-14

    A series of new N,N-dimethylaminopropyl- and 2-imidazolinyl-substituted derivatives of benzo[b]thienyl- and thieno[2,3-b]thienylcarboxanilides and benzo[b]thieno[2,3-c]- and thieno[3',2':4,5]thieno[2,3-c]quinolones were prepared. Quinolones were prepared by the reaction of photochemical dehydrohalogenation of corresponding anilides. Carboxanilides and quinolones were tested for the antiproliferative activity. 2-Imidazolinyl-substituted derivatives showed very prominent activity. By use of the experimentally obtained antitumor measurements, 3D-derived QSAR analysis was performed for the set of compounds. Highly predictive 3D-derived QSAR models were obtained, and molecular properties that have the highest impact on antitumor activity were identified. Carboxanilides 6a-c and quinolones 9a-c and 11a were evaluated for DNA binding propensities and topoisomerases I and II inhibition as part of their mechanism of action assessment. The evaluated differences in the mode of action nicely correlate with the results of the 3D-QSAR analysis. Taken together, the results indicate which modifications of the compounds from the series should further improve their anticancer properties.

  15. Design, synthesis and 3D-QSAR studies of novel 1,4-dihydropyridines as TGFβ/Smad inhibitors.

    PubMed

    Längle, Daniel; Marquardt, Viktoria; Heider, Elena; Vigante, Brigita; Duburs, Gunars; Luntena, Iveta; Flötgen, Dirk; Golz, Christopher; Strohmann, Carsten; Koch, Oliver; Schade, Dennis

    2015-05-05

    Targeting TGFβ/Smad signaling is an attractive strategy for several therapeutic applications given its role as a key player in many pathologies, including cancer, autoimmune diseases and fibrosis. The class of b-annelated 1,4-dihydropyridines (DHPs) represents promising novel pharmacological tools as they interfere with this pathway in a novel fashion, i.e. through induction of TGFβ receptor type II degradation. In the present work, >40 rationally designed, novel DHPs were synthesized and evaluated for TGFβ inhibition, substantially expanding the current understanding of the SAR profile. Key findings include that the 2-position tolerates a wide variety of polar functionalities, suggesting that this region could possibly be solvent-exposed within the (thus far) unknown cellular target. A structural explanation for pathway selectivity is provided based on a diverse series of 4″-substituted DHPs, including molecular electrostatic potential (MEP) calculations. Moreover, the absolute configuration for the chiral 4-position was determined by X-ray crystal analysis and revealed that the bioactive (+)-enantiomers are (R)-configured. Another key objective was to establish a 3D-QSAR model which turned out to be robust (r(2) = 0.93) with a good predictive power (r(2)pred = 0.69). This data further reinforces the hypothesis that this type of DHPs exerts its novel TGFβ inhibitory mode of action through binding a distinct target and that unspecific activities that would derive from intrinsic properties of the ligands (e.g., lipophilicity) play a negligible role. Therefore, the present study provides a solid basis for further ligand-based design of additional analogs or DHP scaffold-derived compounds for hit-to-lead optimization, required for more comprehensive pharmacological studies in vivo.

  16. Recent Advances in Ligand-Based Drug Design: Relevance and Utility of the Conformationally Sampled Pharmacophore Approach

    PubMed Central

    Acharya, Chayan; Coop, Andrew; Polli, James E.; MacKerell, Alexander D.

    2010-01-01

    In the absence of three-dimensional (3D) structures of potential drug targets, ligand-based drug design is one of the popular approaches for drug discovery and lead optimization. 3D structure-activity relationships (3D QSAR) and pharmacophore modeling are the most important and widely used tools in ligand-based drug design that can provide crucial insights into the nature of the interactions between drug target and ligand molecule and provide predictive models suitable for lead compound optimization. This review article will briefly discuss the features and potential application of recent advances in ligand-based drug design, with emphasis on a detailed description of a novel 3D QSAR method based on the conformationally sample pharmacophore (CSP) approach (denoted CSP-SAR). In addition, data from a published study is used to compare the CSP-SAR approach to the Catalyst method, emphasizing the utility of the CSP approach for ligand-based model development. PMID:20807187

  17. 3D-QSAR analysis of a series of S-DABO derivatives as anti-HIV agents by CoMFA and CoMSIA.

    PubMed

    Xu, H R; Fu, L; Zhan, P; Liu, X Y

    2016-12-01

    In this study, we retrieved a series of 59 dihydroalkylthio-benzyloxopyrimidine (S-DABO) derivatives, which is a class of highly potent HIV-1 non-nucleoside reverse transcriptase inhibitors (NNRTIs) reported from published articles, and analysed them with comparative molecular field analysis (CoMFA) and comparative molecular similarity indices analysis (CoMSIA). Statistically significant three-dimensional quantitative structure-activity relationship (3D-QSAR) models by CoMFA and CoMSIA were derived from a training set of 46 compounds on the basis of the rigid body alignment. Further, the predictive ability of the QSAR models was validated by a test set of 13 compounds. Based on the information derived from CoMFA and CoMSIA contour maps, we have identified some steric and electrostatic features for improving the activities of these inhibitors, and we validated the 3D-QSAR results by a molecular docking method. On the basis of the obtained results, we designed a new series of S-DABO derivatives with high activities. Therefore, this study could be utilized to design more potent S-DABO analogues as anti-HIV agents.

  18. In-vitro Antiproliferative Activity of New Tetrahydroisoquinolines (THIQs) on Ishikawa Cells and their 3D Pharmacophore Models

    PubMed Central

    Eyunni, Suresh Kumar V. K.; Gangapuram, Madhavi; Redda, Kinfe K

    2014-01-01

    The antiproliferative activities of new substituted tetrahydroisoquinolines (THIQs) are described. Their cytotoxicities against Ishikawa human endometrial cell line were determined after 72 h drug expose employing Celtiter-Glo assay at concentrations ranging from 0.01 to 100,000 nM. The antiproliferative activities of the compounds understudy were compared to tamoxifen (TAM). In-vitro results indicated that most of the compounds showed better activity than TAM. The most active compounds obtained in this study were 1, 2, 3 and 22 whose IC50 values are 1.41, 0.91, 0.74 and 0.36 μM respectively. This study helped us to evaluate the risk of developing endometrial cancer in the design of non-steroid estrogen receptor modulators with no agonistic effects on uterus. In-silico pharmacophore hypotheses were generated using GALAHAD and PHASE and the best models with a probable bioactive conformation(s) for these compounds were proposed. These conformations and the alignments of the molecular structures give us an insight in designing compounds with better biological activity. PMID:25506297

  19. Computational identification of novel histone deacetylase inhibitors by docking based QSAR.

    PubMed

    Nair, Syam B; Teli, Mahesh Kumar; Pradeep, H; Rajanikant, G K

    2012-06-01

    Histone deacetylases (HDACs) are enzymes that modify chromatin structure and contribute to aberrant gene expression in cancer. A series compounds with well-assigned HDAC inhibitory activity was used for docking based 3D-QSAR analysis. The 3D-QSAR acquired had excellent correlation coefficient value (q2=0.753) and high Fisher ratio (F=300.2). A validated pharmacophore model (AAAPR) was employed for virtual screening. After manual selection, molecular docking and further refinement, six compounds with good absorption, distribution, metabolism, and excretion (ADME) properties were selected as potential HDAC inhibitors. Further, the molecular interactions of these inhibitors with the HDAC active site residues were discussed in detail.

  20. Receptor-based modeling and 3D-QSAR for a quantitative production of the butyrylcholinesterase inhibitors based on genetic algorithm.

    PubMed

    Zaheer-ul, Haq; Uddin, Reaz; Yuan, Hongbin; Petukhov, Pavel A; Choudhary, M Iqbal; Madura, Jeffry D

    2008-05-01

    Three-dimensional quantitative structure-activity relationship (3D-QSAR) models have been constructed using the comparative molecular field analysis (CoMFA) and comparative molecular similarity indices analysis (CoMSIA) for a series of structurally related steroidal alkaloids as butyrylcholinesterase (BuChE) inhibitors. Docking studies were employed to position the inhibitors into the BuChE active site to determine the most probable binding mode. The strategy was to explore multiple inhibitor conformations in producing a more reliable 3D-QSAR model. These multiple conformations were derived using the FlexS program. The conformation selection step for CoMFA was done by genetic algorithm. The genetic algorithm based CoMFA approach was found to be the best. Both CoMFA and CoMSIA yielded significant cross-validated q(2) values of 0.701 and 0.627 and the r(2) values of 0.979 and 0.982, respectively. These statistically significant models were validated by a test set of five compounds. Comparison of CoMFA and CoMSIA contour maps helped to identify structural requirements for the inhibitors and serves as a basis for the design of the next generation of the inhibitor analogues. The results demonstrate that the combination of ligand-based and receptor-based modeling with use of a genetic algorithm is a powerful approach to build 3D-QSAR models. These data can be used for the lead optimization process with respect to inhibition enhancement which is important for the drug discovery and development for Alzheimer's disease.

  1. In silico study on β-aminoketone derivatives as thyroid hormone receptor inhibitors: a combined 3D-QSAR and molecular docking study.

    PubMed

    Wang, Fang-Fang; Yang, Wei; Shi, Yong-Hui; Le, Guo-Wei

    2016-12-01

    In order to explore the structure-activity correlation of a series of β-aminoketone analogs as inhibitors of thyroid hormone receptor (TR), a set of three-dimensional quantitative structure-activity relationship (3D-QSAR) models based on comparative molecular field analysis (CoMFA) and comparative molecular similarity analysis (CoMSIA), for the first time, were developed in the present work. The best CoMFA model with steric and electrostatic fields exhibited [Formula: see text], [Formula: see text] for TRβ, and [Formula: see text], [Formula: see text] for TRα. 3D contour maps produced from the optimal models were further analyzed individually, which provide the areas in space where interactive fields would affect the inhibitory activity. In addition, the binding modes of inhibitors at the active site of TRs were examined using molecular docking, the results indicated that this series of inhibitors fit into the active site of TRs by forming hydrogen bonding and electrostatic interactions. The docking studies also revealed that Leu305, Val458 for TRβ, and Asp407 for TRα are showing hydrogen bonds with the most active inhibitors. In any case, the 3D-QSAR models combined with the binding information will serve as a useful approach to explore the chemical space for improving the activity of TRβ and TRα inhibitors.

  2. Searching for anthranilic acid-based thumb pocket 2 HCV NS5B polymerase inhibitors through a combination of molecular docking, 3D-QSAR and virtual screening.

    PubMed

    Vrontaki, Eleni; Melagraki, Georgia; Mavromoustakos, Thomas; Afantitis, Antreas

    2016-01-01

    A combination of the following computational methods: (i) molecular docking, (ii) 3-D Quantitative Structure Activity Relationship Comparative Molecular Field Analysis (3D-QSAR CoMFA), (iii) similarity search and (iv) virtual screening using PubChem database was applied to identify new anthranilic acid-based inhibitors of hepatitis C virus (HCV) replication. A number of known inhibitors were initially docked into the "Thumb Pocket 2" allosteric site of the crystal structure of the enzyme HCV RNA-dependent RNA polymerase (NS5B GT1b). Then, the CoMFA fields were generated through a receptor-based alignment of docking poses to build a validated and stable 3D-QSAR CoMFA model. The proposed model can be first utilized to get insight into the molecular features that promote bioactivity, and then within a virtual screening procedure, it can be used to estimate the activity of novel potential bioactive compounds prior to their synthesis and biological tests.

  3. Structure/response correlations and similarity/diversity analysis by GETAWAY descriptors. 2. Application of the novel 3D molecular descriptors to QSAR/QSPR studies.

    PubMed

    Consonni, Viviana; Todeschini, Roberto; Pavan, Manuela; Gramatica, Paola

    2002-01-01

    In a previous paper the theory of the new molecular descriptors called GETAWAY (GEometry, Topology, and Atom-Weights AssemblY) was explained. These descriptors have been proposed with the aim of matching 3D-molecular geometry, atom relatedness, and chemical information. In this paper prediction ability in structure-property correlations of GETAWAY descriptors has been tested extensively by analyzing the regressions of these descriptors for selected properties of some reference compound classes. Moreover, the general performance of the new descriptors in QSAR/QSPR has been evaluated with respect to other well-known sets of molecular descriptors.

  4. Combined 3D-QSAR modeling and molecular docking studies on pyrrole-indolin-2-ones as Aurora A kinase inhibitors.

    PubMed

    Ai, Yong; Wang, Shao-Teng; Sun, Ping-Hua; Song, Fa-Jun

    2011-01-01

    Aurora kinases have emerged as attractive targets for the design of anticancer drugs. 3D-QSAR (comparative molecular field analysis (CoMFA) and comparative molecular similarity indices analysis (CoMSIA)) and Surflex-docking studies were performed on a series of pyrrole-indoline-2-ones as Aurora A inhibitors. The CoMFA and CoMSIA models using 25 inhibitors in the training set gave r(2) (cv) values of 0.726 and 0.566, and r(2) values of 0.972 and 0.984, respectively. The adapted alignment method with the suitable parameters resulted in reliable models. The contour maps produced by the CoMFA and CoMSIA models were employed to rationalize the key structural requirements responsible for the activity. Surflex-docking studies revealed that the sulfo group, secondary amine group on indolin-2-one, and carbonyl of 6,7-dihydro-1H-indol-4(5H)-one groups were significant for binding to the receptor, and some essential features were also identified. Based on the 3D-QSAR and docking results, a set of new molecules with high predicted activities were designed.

  5. New ligands with affinity for the alpha4beta2 subtype of nicotinic acetylcholine receptors. Synthesis, receptor binding, and 3D-QSAR modeling.

    PubMed

    Audouze, Karine; Nielsen, Elsebet Østergaard; Olsen, Gunnar M; Ahring, Philip; Jørgensen, Tino Dyhring; Peters, Dan; Liljefors, Tommy; Balle, Thomas

    2006-06-01

    A new series of piperazines, diazepanes, diazocanes, diazabicyclononanes, and diazabicyclodecanes with affinity for the alpha4beta2 subtype of nicotinic acetylcholine receptors were synthesized on the basis of results from a previous computational study. A predictive 3D-QSAR model was developed using the GRID/GOLPE approach (R2 = 0.94, Q2 = 0.83, SDEP = 0.34). The SAR was interpreted in terms of contour maps of the PLS coefficients and in terms of a homology model of the alpha4beta2 subtype of the nicotinic acetylcholine receptors. The results reveal that hydrogen bonding from both hydrogens on the protonated amine and from the pyridine nitrogen to a water molecule as well as van der Waals interactions between the substituent bearing the protonated amine and the receptor is of importance for ligand affinity. The combination of 3D-QSAR and homology modeling proved successful for the interpretation of structure-affinity relationships as well as the validation of the individual modeling approaches.

  6. 3D pharmacophore-based virtual screening, docking and density functional theory approach towards the discovery of novel human epidermal growth factor receptor-2 (HER2) inhibitors.

    PubMed

    Gogoi, Dhrubajyoti; Baruah, Vishwa Jyoti; Chaliha, Amrita Kashyap; Kakoti, Bibhuti Bhushan; Sarma, Diganta; Buragohain, Alak Kumar

    2016-12-21

    Human epidermal growth factor receptor 2 (HER2) is one of the four members of the epidermal growth factor receptor (EGFR) family and is expressed to facilitate cellular proliferation across various tissue types. Therapies targeting HER2, which is a transmembrane glycoprotein with tyrosine kinase activity, offer promising prospects especially in breast and gastric/gastroesophageal cancer patients. Persistence of both primary and acquired resistance to various routine drugs/antibodies is a disappointing outcome in the treatment of many HER2 positive cancer patients and is a challenge that requires formulation of new and improved strategies to overcome the same. Identification of novel HER2 inhibitors with improved therapeutics index was performed with a highly correlating (r=0.975) ligand-based pharmacophore model (Hypo1) in this study. Hypo1 was generated from a training set of 22 compounds with HER2 inhibitory activity and this well-validated hypothesis was subsequently used as a 3D query to screen compounds in a total of four databases of which two were natural product databases. Further, these compounds were analyzed for compliance with Veber's drug-likeness rule and optimum ADMET parameters. The selected compounds were then subjected to molecular docking and Density Functional Theory (DFT) analysis to discern their molecular interactions at the active site of HER2. The findings thus presented would be an important starting point towards the development of novel HER2 inhibitors using well-validated computational techniques.

  7. Identification of the Structural Features of Guanine Derivatives as MGMT Inhibitors Using 3D-QSAR Modeling Combined with Molecular Docking.

    PubMed

    Sun, Guohui; Fan, Tengjiao; Zhang, Na; Ren, Ting; Zhao, Lijiao; Zhong, Rugang

    2016-06-23

    DNA repair enzyme O⁶-methylguanine-DNA methyltransferase (MGMT), which plays an important role in inducing drug resistance against alkylating agents that modify the O⁶ position of guanine in DNA, is an attractive target for anti-tumor chemotherapy. A series of MGMT inhibitors have been synthesized over the past decades to improve the chemotherapeutic effects of O⁶-alkylating agents. In the present study, we performed a three-dimensional quantitative structure activity relationship (3D-QSAR) study on 97 guanine derivatives as MGMT inhibitors using comparative molecular field analysis (CoMFA) and comparative molecular similarity indices analysis (CoMSIA) methods. Three different alignment methods (ligand-based, DFT optimization-based and docking-based alignment) were employed to develop reliable 3D-QSAR models. Statistical parameters derived from the models using the above three alignment methods showed that the ligand-based CoMFA (Qcv² = 0.672 and Rncv² = 0.997) and CoMSIA (Qcv² = 0.703 and Rncv² = 0.946) models were better than the other two alignment methods-based CoMFA and CoMSIA models. The two ligand-based models were further confirmed by an external test-set validation and a Y-randomization examination. The ligand-based CoMFA model (Qext² = 0.691, Rpred² = 0.738 and slope k = 0.91) was observed with acceptable external test-set validation values rather than the CoMSIA model (Qext² = 0.307, Rpred² = 0.4 and slope k = 0.719). Docking studies were carried out to predict the binding modes of the inhibitors with MGMT. The results indicated that the obtained binding interactions were consistent with the 3D contour maps. Overall, the combined results of the 3D-QSAR and the docking obtained in this study provide an insight into the understanding of the interactions between guanine derivatives and MGMT protein, which will assist in designing novel MGMT inhibitors with desired activity.

  8. Receptor-based 3D QSAR analysis of estrogen receptor ligands - merging the accuracy of receptor-based alignments with the computational efficiency of ligand-based methods

    NASA Astrophysics Data System (ADS)

    Sippl, Wolfgang

    2000-08-01

    One of the major challenges in computational approaches to drug design is the accurate prediction of binding affinity of biomolecules. In the present study several prediction methods for a published set of estrogen receptor ligands are investigated and compared. The binding modes of 30 ligands were determined using the docking program AutoDock and were compared with available X-ray structures of estrogen receptor-ligand complexes. On the basis of the docking results an interaction energy-based model, which uses the information of the whole ligand-receptor complex, was generated. Several parameters were modified in order to analyze their influence onto the correlation between binding affinities and calculated ligand-receptor interaction energies. The highest correlation coefficient ( r 2 = 0.617, q 2 LOO = 0.570) was obtained considering protein flexibility during the interaction energy evaluation. The second prediction method uses a combination of receptor-based and 3D quantitative structure-activity relationships (3D QSAR) methods. The ligand alignment obtained from the docking simulations was taken as basis for a comparative field analysis applying the GRID/GOLPE program. Using the interaction field derived with a water probe and applying the smart region definition (SRD) variable selection, a significant and robust model was obtained ( r 2 = 0.991, q 2 LOO = 0.921). The predictive ability of the established model was further evaluated by using a test set of six additional compounds. The comparison with the generated interaction energy-based model and with a traditional CoMFA model obtained using a ligand-based alignment ( r 2 = 0.951, q 2 LOO = 0.796) indicates that the combination of receptor-based and 3D QSAR methods is able to improve the quality of the underlying model.

  9. Inhibitory mode of 1,5-diarylpyrazole derivatives against cyclooxygenase-2 and cyclooxygenase-1: molecular docking and 3D QSAR analyses.

    PubMed

    Liu, Hong; Huang, Xiaoqin; Shen, Jianhua; Luo, Xiaomin; Li, Minghui; Xiong, Bing; Chen, Gang; Shen, Jingkang; Yang, Yimin; Jiang, Hualiang; Chen, Kaixian

    2002-10-24

    The Lamarckian genetic algorithm of AutoDock 3.0 has been employed to dock 40 1,5-diarylpyrazole class compounds into the active sites of cyclooxygenase-2 (COX-2) and cyclooxygenase-1 (COX-1). The binding models were demonstrated in the aspects of inhibitor's conformation, subsite interaction, and hydrogen bonding. The data of geometrical parameters and RMSD values compared with the known inhibitor, SC-558 (43), show that these inhibitors interact respectively with COX-2 and COX-1 in a very similar way. The r(2) values of 0.648 for COX-2 and 0.752 for COX-1 indicate that the calculated binding free energies correlate well with the inhibitory activities. The structural and energetic differences in inhibitory potencies of 1,5-diarylpyrazoles were reasonably explored, and the COX-2/COX-1 selectivity was demonstrated by the three-dimensional (3D) interaction models of inhibitors complexing with these two enzymes. Using the binding conformations of 1,5-diarylpyrazoles, consistent and highly predictive 3D quantitative structure-activity relationship (QSAR) models were developed by performing comparative molecular field analyses (CoMFA) and comparative molecular similarity analyses (CoMSIA). The q(2) values are 0.635 and 0.641 for CoMFA and CoMSIA models, respectively. The predictive ability of these models was validated by SC-558 (43) and a set of 10 other compounds that were not included in the training set. Mapping these models back to the topology of the active site of COX-2 leads to a better understanding of vital diarylpyrazole compounds and COX-2 interactions. Structure-based investigations and the final 3D QSAR results provided possible guidelines and accurate activity predictions for novel inhibitor design.

  10. Hsp90 inhibitors, part 1: definition of 3-D QSAutogrid/R models as a tool for virtual screening.

    PubMed

    Ballante, Flavio; Caroli, Antonia; Wickersham, Richard B; Ragno, Rino

    2014-03-24

    The multichaperone heat shock protein (Hsp) 90 complex mediates the maturation and stability of a variety of oncogenic signaling proteins. For this reason, Hsp90 has emerged as a promising target for anticancer drug development. Herein, we describe a complete computational procedure for building several 3-D QSAR models used as a ligand-based (LB) component of a comprehensive ligand-based (LB) and structure-based (SB) virtual screening (VS) protocol to identify novel molecular scaffolds of Hsp90 inhibitors. By the application of the 3-D QSAutogrid/R method, eight SB PLS 3-D QSAR models were generated, leading to a final multiprobe (MP) 3-D QSAR pharmacophoric model capable of recognizing the most significant chemical features for Hsp90 inhibition. Both the monoprobe and multiprobe models were optimized, cross-validated, and tested against an external test set. The obtained statistical results confirmed the models as robust and predictive to be used in a subsequent VS.

  11. BCR-ABL tyrosine kinase inhibitor pharmacophore model derived from a series of phenylaminopyrimidine-based (PAP) derivatives.

    PubMed

    Cui, Jing; Fu, Rao; Zhou, Li-Hua; Chen, Sheng-Ping; Li, Guang-Wu; Qian, Shen-Xian; Liu, Shu

    2013-04-15

    To reveal novel insights into the inhibition of BCR-ABL tyrosine kinase, pharmacophore mapping studies were performed for a series of phenylaminopyrimidine-based (PAP) derivatives, including imatinib (Gleevec). A seven-point pharmacophore model with one hydrophobic group (H), two hydrogen bond donors (D) and four aromatic rings (R) was developed using phase (pharmacophore alignment & scoring engine). The pharmacophore hypothesis yielded a statistically significant 3D-QSAR model, with a correlation coefficient of 0.886 and a survival score of 4.97 for training set molecules. The model showed excellent predictive power, with a correlation coefficient of Q(2)=0.768 for an external test set of ten molecules. The results obtained from our studies provide a valuable tool for designing new lead molecules with potent activity.

  12. 2D-QSAR and 3D-QSAR/CoMSIA Studies on a Series of (R)-2-((2-(1H-Indol-2-yl)ethyl)amino)-1-Phenylethan-1-ol with Human β₃-Adrenergic Activity.

    PubMed

    Apablaza, Gastón; Montoya, Luisa; Morales-Verdejo, Cesar; Mellado, Marco; Cuellar, Mauricio; Lagos, Carlos F; Soto-Delgado, Jorge; Chung, Hery; Pessoa-Mahana, Carlos David; Mella, Jaime

    2017-03-05

    The β₃ adrenergic receptor is raising as an important drug target for the treatment of pathologies such as diabetes, obesity, depression, and cardiac diseases among others. Several attempts to obtain selective and high affinity ligands have been made. Currently, Mirabegron is the only available drug on the market that targets this receptor approved for the treatment of overactive bladder. However, the FDA (Food and Drug Administration) in USA and the MHRA (Medicines and Healthcare products Regulatory Agency) in UK have made reports of potentially life-threatening side effects associated with the administration of Mirabegron, casting doubts on the continuity of this compound. Therefore, it is of utmost importance to gather information for the rational design and synthesis of new β₃ adrenergic ligands. Herein, we present the first combined 2D-QSAR (two-dimensional Quantitative Structure-Activity Relationship) and 3D-QSAR/CoMSIA (three-dimensional Quantitative Structure-Activity Relationship/Comparative Molecular Similarity Index Analysis) study on a series of potent β₃ adrenergic agonists of indole-alkylamine structure. We found a series of changes that can be made in the steric, hydrogen-bond donor and acceptor, lipophilicity and molar refractivity properties of the compounds to generate new promising molecules. Finally, based on our analysis, a summary and a regiospecific description of the requirements for improving β₃ adrenergic activity is given.

  13. Studies of new fused benzazepine as selective dopamine D3 receptor antagonists using 3D-QSAR, molecular docking and molecular dynamics.

    PubMed

    Liu, Jing; Li, Yan; Zhang, Shuwei; Xiao, Zhengtao; Ai, Chunzhi

    2011-02-18

    In recent years, great interest has been paid to the development of compounds with high selectivity for central dopamine (DA) D3 receptors, an interesting therapeutic target in the treatment of different neurological disorders. In the present work, based on a dataset of 110 collected benzazepine (BAZ) DA D3 antagonists with diverse kinds of structures, a variety of in silico modeling approaches, including comparative molecular field analysis (CoMFA), comparative similarity indices analysis (CoMSIA), homology modeling, molecular docking and molecular dynamics (MD) were carried out to reveal the requisite 3D structural features for activity. Our results show that both the receptor-based (Q(2) = 0.603, R(2) (ncv) = 0.829, R(2) (pre) = 0.690, SEE = 0.316, SEP = 0.406) and ligand-based 3D-QSAR models (Q(2) = 0.506, R(2) (ncv) =0.838, R(2) (pre) = 0.794, SEE = 0.316, SEP = 0.296) are reliable with proper predictive capacity. In addition, a combined analysis between the CoMFA, CoMSIA contour maps and MD results with a homology DA receptor model shows that: (1) ring-A, position-2 and R(3) substituent in ring-D are crucial in the design of antagonists with higher activity; (2) more bulky R(1) substituents (at position-2 of ring-A) of antagonists may well fit in the binding pocket; (3) hydrophobicity represented by MlogP is important for building satisfactory QSAR models; (4) key amino acids of the binding pocket are CYS101, ILE105, LEU106, VAL151, PHE175, PHE184, PRO254 and ALA251. To our best knowledge, this work is the first report on 3D-QSAR modeling of the new fused BAZs as DA D3 antagonists. These results might provide information for a better understanding of the mechanism of antagonism and thus be helpful in designing new potent DA D3 antagonists.

  14. In Silico Exploration of 1,7-Diazacarbazole Analogs as Checkpoint Kinase 1 Inhibitors by Using 3D QSAR, Molecular Docking Study, and Molecular Dynamics Simulations.

    PubMed

    Gao, Xiaodong; Han, Liping; Ren, Yujie

    2016-05-05

    Checkpoint kinase 1 (Chk1) is an important serine/threonine kinase with a self-protection function. The combination of Chk1 inhibitors and anti-cancer drugs can enhance the selectivity of tumor therapy. In this work, a set of 1,7-diazacarbazole analogs were identified as potent Chk1 inhibitors through a series of computer-aided drug design processes, including three-dimensional quantitative structure-activity relationship (3D-QSAR) modeling, molecular docking, and molecular dynamics simulations. The optimal QSAR models showed significant cross-validated correlation q² values (0.531, 0.726), fitted correlation r² coefficients (higher than 0.90), and standard error of prediction (less than 0.250). These results suggested that the developed models possess good predictive ability. Moreover, molecular docking and molecular dynamics simulations were applied to highlight the important interactions between the ligand and the Chk1 receptor protein. This study shows that hydrogen bonding and electrostatic forces are key interactions that confer bioactivity.

  15. A Novel Approach for the Identification of Pharmacophores Through Differential Toxicity Analysis of Estrogen Receptor Positive and Negative Cell Lines

    DTIC Science & Technology

    2009-07-01

    Associate Professor of Medicine with a joint appointment as Associate Professor of Pharmacology and Toxicology at the University of Louisville’s...pharmacophores for later 3-D QSAR modeling. Moreover, from a practical point, models of atom size 12 had roughly nearly 200,000 fragments wherein size...performed in general, one can consider the “accuracy” or reproducibility of a standard in vitro toxicological test. For instance, the US National Toxicology

  16. Synthesis and QSAR study of novel anti-inflammatory active mesalazine-metronidazole conjugates.

    PubMed

    Naumov, Roman N; Panda, Siva S; Girgis, Adel S; George, Riham F; Farhat, Michel; Katritzky, Alan R

    2015-06-01

    Novel, mesalazine, metronidazole conjugates 6a-e with amino acid linkers were synthesized utilizing benzotriazole chemistry. Biological data acquired for all the novel bis-conjugates showed (a) some bis-conjugates exhibit comparable anti-inflammatory activity with parent drugs and (b) the potent bis-conjugates show no visible stomach lesions. 3D-pharmacophore and 2D-QSAR modeling support the observed bio-properties.

  17. Modifying tetramethyl–nitrophenyl–imidazoline with amino acids: design, synthesis, and 3D-QSAR for improving inflammatory pain therapy

    PubMed Central

    Jiang, Xueyun; Wang, Yuji; Zhu, Haimei; Wang, Yaonan; Zhao, Ming; Zhao, Shurui; Wu, Jianhui; Li, Shan; Peng, Shiqi

    2015-01-01

    With the help of pharmacophore analysis and docking investigation, 15 novel 1-(4,4,5,5-tetramethyl-2-(3-nitrophenyl)-4,5-dihydroimidazol-1-yl)-oxyacetyl-L-amino acids (6a–o) were designed, synthesized, and assayed. On tail-flick and xylene-induced ear edema models, 10 μmol/kg 6a–o exhibited excellent oral anti-inflammation and analgesic activity. The dose-dependent assay of their representative 6f indicates that the effective dose should be 3.3 μmol/kg. The correlation of the three-dimensional quantitative structure–activity relationship with the docking analysis provides a basis for the rational design of drugs to treat inflammatory pain. PMID:25960636

  18. 3D-QSAR studies on unsaturated 4-azasteroids as human 5alpha-reductase inhibitors: a self organizing molecular field analysis approach.

    PubMed

    Aggarwal, Saurabh; Thareja, Suresh; Bhardwaj, T R; Kumar, Manoj

    2010-02-01

    Azasteroids have been reported as inhibitors of human 5alpha-reductase enzyme. These were designed by substitution of one carbon atom of steroidal A ring by heteroatom nitrogen. Due to lack of information on the crystal structure of human 5alpha-reductase, 3D-QSAR study has been performed on a series of unsaturated 4-azasteroids using Self Organizing Molecular Field Analysis (SOMFA) for rationalizing the molecular properties and human 5alpha-reductase inhibitory activities. The statistical results having good cross-validated r(2)(cv) (0.783), non cross-validated r(2) (0.806) and F-test value (87.282), showed satisfied predictive ability. Analysis of SOMFA models through electrostatic and shape grids provide useful information for the design and optimization of new steroidal human 5alpha-reductase inhibitors.

  19. 3D-QSAR study and design of 4-hydroxyamino α-pyranone carboxamide analogues as potential anti-HCV agents

    NASA Astrophysics Data System (ADS)

    Li, Wenlian; Xiao, Faqi; Zhou, Mingming; Jiang, Xuejin; Liu, Jun; Si, Hongzong; Xie, Meng; Ma, Xiuting; Duan, Yunbo; Zhai, Honglin

    2016-09-01

    The three dimensional-quantitative structure activity relationship (3D-QSAR) study was performed on a series of 4-hydroxyamino α-pyranone carboxamide analogues using comparative molecular similarity indices analysis (COMSIA). The purpose of the present study was to develop a satisfactory model providing a reliable prediction based on 4-hydroxyamino α-pyranone carboxamide analogues as anti-HCV (hepatitis C virus) inhibitors. The statistical results and the results of validation of this optimum COMSIA model were satisfactory. Furthermore, analysis of the contour maps helped to provide guidelines for finding structural requirement. Therefore, the satisfactory results from this study may provide useful guidelines for drug development of anti-HCV inhibitors.

  20. Microwave assistant one pot synthesis, crystal structure, antifungal activities and 3D-QSAR of novel 1,2,4-triazolo[4,3-a]pyridines.

    PubMed

    Liu, Xing-Hai; Sun, Zhao-Hui; Yang, Ming-Yan; Tan, Cheng-Xia; Weng, Jian-Quan; Zhang, Yong-Gang; Ma, Yi

    2014-09-01

    A series of novel 1,2,4-triazolo[4,3-a]pyridines were synthesized, and their structures were characterized by (1) H NMR, MS, elemental analysis, and single-crystal X-ray diffraction analysis. The antifungal activities were evaluated. The antifungal activity results indicated that the compound 2b, 2g, 2p, and 2i exhibited good activities. The activity of compound 2b, 2g, 2p, and 2i can compare with the commercial pesticide. The 3D-QSAR model was developed using CoMFA method. Both the steric and electronic field distributions of CoMFA are in good agreement in this work and will be very helpful in designing a new set of analogues.

  1. Structure-based rational quest for potential novel inhibitors of human HMG-CoA reductase by combining CoMFA 3D QSAR modeling and virtual screening.

    PubMed

    Zhang, Qing Y; Wan, Jian; Xu, Xin; Yang, Guang F; Ren, Yan L; Liu, Jun J; Wang, Hui; Guo, Yu

    2007-01-01

    3-Hydroxy-3-methylglutaryl-coenzyme A reductase (HMGR) catalyzes the formation of mevalonate. In many classes of organisms, this is the committed step leading to the synthesis of essential compounds, such as cholesterol. However, a high level of cholesterol is an important risk factor for coronary heart disease, for which an effective clinical treatment is to block HMGR using inhibitors like statins. Recently the structures of catalytic portion of human HMGR complexed with six different statins have been determined by a delicate crystallography study (Istvan and Deisenhofer Science 2001, 292, 1160-1164), which established a solid basis of structure and mechanism for the rational design, optimization, and development of even better HMGR inhibitors. In this study, three-dimensional quantitative structure-activity relationship (3D QSAR) with comparative molecular field analysis (CoMFA) was performed on a training set of up to 35 statins and statin-like compounds. Predictive models were established by using two different ways: (1) Models-fit, obtained by SYBYL conventional fit-atom molecular alignment rule, has cross-validated coefficients (q2) up to 0.652 and regression coefficients (r2) up to 0.977. (2) Models-dock, obtained by FlexE by docking compounds into the HMGR active site, has cross-validated coefficients (q2) up to 0.731 and regression coefficients (r2) up to 0.947. These models were further validated by an external testing set of 12 statins and statin-like compounds. Integrated with CoMFA 3D QSAR predictive models, molecular surface property (electrostatic and steric) mapping and structure-based (both ligand and receptor) virtual screening have been employed to explore potential novel hits for the HMGR inhibitors. A representative set of eight new compounds of non-statin-like structures but with high pIC(50) values were sorted out in the present study.

  2. Use of molecular modeling, docking, and 3D-QSAR studies for the determination of the binding mode of benzofuran-3-yl-(indol-3-yl)maleimides as GSK-3beta inhibitors.

    PubMed

    Kim, Ki Hwan; Gaisina, Irina; Gallier, Franck; Holzle, Denise; Blond, Sylvie Y; Mesecar, Andrew; Kozikowski, Alan P

    2009-12-01

    Molecular modeling and docking studies along with three-dimensional quantitative structure relationships (3D-QSAR) studies have been used to determine the correct binding mode of glycogen synthase kinase 3beta (GSK-3beta) inhibitors. The approaches of comparative molecular field analysis (CoMFA) and comparative molecular similarity index analysis (CoMSIA) are used for the 3D-QSAR of 51 substituted benzofuran-3-yl-(indol-3-yl)maleimides as GSK-3beta inhibitors. Two binding modes of the inhibitors to the binding site of GSK-3beta are investigated. The binding mode 1 yielded better 3D-QSAR correlations using both CoMFA and CoMSIA methodologies. The three-component CoMFA model from the steric and electrostatic fields for the experimentally determined pIC(50) values has the following statistics: R(2)(cv) = 0.386 nd SE(cv) = 0.854 for the cross-validation, and R(2) = 0.811 and SE = 0.474 for the fitted correlation. F (3,47) = 67.034, and probability of R(2) = 0 (3,47) = 0.000. The binding mode suggested by the results of this study is consistent with the preliminary results of X-ray crystal structures of inhibitor-bound GSK-3beta. The 3D-QSAR models were used for the estimation of the inhibitory potency of two additional compounds.

  3. Structural requirements of 3-carboxyl-4(1H)-quinolones as potential antimalarials from 2D and 3D QSAR analysis.

    PubMed

    Li, Jiazhong; Li, Shuyan; Bai, Chongliang; Liu, Huanxiang; Gramatica, Paola

    2013-07-01

    Malaria is a fatal tropical and subtropical disease caused by the protozoal species Plasmodium. Many commonly available antimalarial drugs and therapies are becoming ineffective because of the emergence of multidrug resistant Plasmodium falciparum, which drives the need for the development of new antimalarial drugs. Recently, a series of 3-carboxyl-4(1H)-quinolone analogs, derived from the famous compound endochin, were reported as promising candidates for orally efficacious antimalarials. In this study, to analyze the structure-activity relationships (SAR) of these quinolones and investigate the structural requirements for antimalarial activity, the 2D multiple linear regressions (MLR) method and 3D comparative molecular field analysis (CoMFA) and comparative molecular similarity indices analysis (CoMSIA) methods are employed to evolve different QSAR models. All these models give satisfactory results with highly accurate fitting and strong external predictive abilities for chemicals not used in model development. Furthermore, the contour maps from 3D models can provide an intuitive understanding of the key structure features responsible for the antimalarial activities. In conclusion, we summarize the detailed position-specific structural requirements of these derivatives accordingly. All these results are helpful for the rational design of new compounds with higher antimalarial bioactivities.

  4. 3D-QSAR, homology modeling, and molecular docking studies on spiropiperidines analogues as agonists of nociceptin/orphanin FQ receptor.

    PubMed

    Liu, Ming; He, Lin; Hu, Xiaopeng; Liu, Peiqing; Luo, Hai-Bin

    2010-12-01

    The nociceptin/orphanin FQ receptor (NOP) has been implicated in a wide range of biological functions, including pain, anxiety, depression and drug abuse. Especially, its agonists have a great potential to be developed into anxiolytics. However, the crystal structure of NOP is still not available. In the present work, both structure-based and ligand-based modeling methods have been used to achieve a comprehensive understanding on 67N-substituted spiropiperidine analogues as NOP agonists. The comparative molecular-field analysis method was performed to formulate a reasonable 3D-QSAR model (cross-validated coefficient q(2)=0.819 and conventional r(2)=0.950), whose robustness and predictability were further verified by leave-eight-out, Y-randomization, and external test-set validations. The excellent performance of CoMFA to the affinity differences among these compounds was attributed to the contributions of electrostatic/hydrogen-bonding and steric/hydrophobic interactions, which was supported by the Surflex-Dock and CDOCKER molecular-docking simulations based on the 3D model of NOP built by the homology modeling method. The CoMFA contour maps and the molecular docking simulations were integrated to propose a binding mode for the spiropiperidine analogues at the binding site of NOP.

  5. Atom-based 3D-QSAR, molecular docking and molecular dynamics simulation assessment of inhibitors for thyroid hormone receptor α and β.

    PubMed

    Gupta, Manish Kumar; Misra, Krishna

    2014-06-01

    The three-dimensional quantitative structure-activity relationship (3D-QSAR) for inhibitors of thyroid hormone receptors (TR) α and (TR) β was studied. The training set of the TRα model generated a correlation coefficient (R(2)) =  0.9535, with standard deviation (SD) =  0.3016. From the test set of the TRα model, a Q(2) value for the predicted activities (= 0.4303), squared correlation (random selection R(2)-CV  =  0.6929), Pearson-R (= 0.7294) and root mean square error (RMSE  =  0.6342) were calculated. The P-value for TRα (= 1.411e-96) and TRβ (= 2.108e-165) models indicate a high degree of self-reliance. For the TRβ model, the training set yielded R(2) = 0.9424 with SD = 0.3719. From the test set of TRβ, Q(2) value (= 0.5336), the squared correlation (R(2)-CV  =  0.7201), the Pearson-R (= 0.7852) and RMSE for test set predictions (= 0.8630) all strengthen the good predictive competence of the QSAR model derived. Examination of internal as well as external validation supports the rationality and good predictive ability of the best model. Molecular docking explained the conformations of molecules and important amino acid residues at the docking pocket, and a molecular dynamics simulation study further uncovered the binding process and validated the rationality of docking results. The findings not only lead to a better understanding of interactions between these antagonists and thyroid hormone receptors α and β, but also provide valuable information about the impact of structure on activity that will be very beneficial in the design of novel antagonists with preferred activity.

  6. Pharmacophore, QSAR, and binding mode studies of substrates of human cytochrome P450 2D6 (CYP2D6) using molecular docking and virtual mutations and an application to chinese herbal medicine screening.

    PubMed

    Mo, Sui-Lin; Liu, Wei-Feng; Li, Chun-Guang; Zhou, Zhi-Wei; Luo, Hai-Bin; Chew, Helen; Liang, Jun; Zhou, Shu-Feng

    2012-07-01

    The highly polymorphic human cytochrome P450 2D6 (CYP2D6) metabolizes about 25% of currently used drugs. In this study, we have explored the interaction of a large number of substrates (n = 120) with wild-type and mutated CYP2D6 by molecular docking using the CDOCKER module. Before we conducted the molecular docking and virtual mutations, the pharmacophore and QSAR models of CYP2D6 substrates were developed and validated. Finally, we explored the interaction of a traditional Chinese herbal formula, Fangjifuling decoction, with CYP2D6 by virtual screening. The optimized pharmacophore model derived from 20 substrates of CYP2D6 contained two hydrophobic features and one hydrogen bond acceptor feature, giving a relevance ratio of 76% when a validation set of substrates were tested. However, our QSAR models gave poor prediction of the binding affinity of substrates. Our docking study demonstrated that 117 out of 120 substrates could be docked into the active site of CYP2D6. Forty one out of 117 substrates (35.04%) formed hydrogen bonds with various active site residues of CYP2D6 and 53 (45.30%) substrates formed a strong π-π interaction with Phe120 (53/54), with only carvedilol showing π-π interaction with Phe483. The active site residues involving hydrogen bond formation with substrates included Leu213, Lys214, Glu216, Ser217, Gln244, Asp301, Ser304, Ala305, Phe483, and Phe484. Furthermore, the CDOCKER algorithm was further applied to study the impact of mutations of 28 active site residues (mostly non-conserved) of CYP2D6 on substrate binding modes using five probe substrates including bufuralol, debrisoquine, dextromethorphan, sparteine, and tramadol. All mutations of the residues examined altered the hydrogen bond formation and/or aromatic interactions, depending on the probe used in molecular docking. Apparent changes of the binding modes have been observed with the Glu216Asp and Asp301Glu mutants. Overall, 60 compounds out of 130 from Fangjifuling decoction

  7. 3D-QSAR and molecular docking studies on designing inhibitors of the hepatitis C virus NS5B polymerase

    NASA Astrophysics Data System (ADS)

    Li, Wenlian; Si, Hongzong; Li, Yang; Ge, Cuizhu; Song, Fucheng; Ma, Xiuting; Duan, Yunbo; Zhai, Honglin

    2016-08-01

    Viral hepatitis C infection is one of the main causes of the hepatitis after blood transfusion and hepatitis C virus (HCV) infection is a global health threat. The HCV NS5B polymerase, an RNA dependent RNA polymerase (RdRp) and an essential role in the replication of the virus, has no functional equivalent in mammalian cells. So the research and development of efficient NS5B polymerase inhibitors provides a great strategy for antiviral therapy against HCV. A combined three-dimensional quantitative structure-activity relationship (QSAR) modeling was accomplished to profoundly understand the structure-activity correlation of a train of indole-based inhibitors of the HCV NS5B polymerase to against HCV. A comparative molecular similarity indices analysis (COMSIA) model as the foundation of the maximum common substructure alignment was developed. The optimum model exhibited statistically significant results: the cross-validated correlation coefficient q2 was 0.627 and non-cross-validated r2 value was 0.943. In addition, the results of internal validations of bootstrapping and Y-randomization confirmed the rationality and good predictive ability of the model, as well as external validation (the external predictive correlation coefficient rext2 = 0.629). The information obtained from the COMSIA contour maps enables the interpretation of their structure-activity relationship. Furthermore, the molecular docking study of the compounds for 3TYV as the protein target revealed important interactions between active compounds and amino acids, and several new potential inhibitors with higher activity predicted were designed basis on our analyses and supported by the simulation of molecular docking. Meanwhile, the OSIRIS Property Explorer was introduced to help select more satisfactory compounds. The satisfactory results from this study may lay a reliable theoretical base for drug development of hepatitis C virus NS5B polymerase inhibitors.

  8. 3D-QSAR and molecular docking studies on derivatives of MK-0457, GSK1070916 and SNS-314 as inhibitors against Aurora B kinase.

    PubMed

    Zhang, Baidong; Li, Yan; Zhang, Huixiao; Ai, Chunzhi

    2010-11-02

    Development of anticancer drugs targeting Aurora B, an important member of the serine/threonine kinases family, has been extensively focused on in recent years. In this work, by applying an integrated computational method, including comparative molecular field analysis (CoMFA), comparative molecular similarity indices analysis (CoMSIA), homology modeling and molecular docking, we investigated the structural determinants of Aurora B inhibitors based on three different series of derivatives of 108 molecules. The resultant optimum 3D-QSAR models exhibited (q(2) = 0.605, r(2) (pred) = 0.826), (q(2) = 0.52, r(2) (pred) = 0.798) and (q(2) = 0.582, r(2) (pred) = 0.971) for MK-0457, GSK1070916 and SNS-314 classes, respectively, and the 3D contour maps generated from these models were analyzed individually. The contour map analysis for the MK-0457 model revealed the relative importance of steric and electrostatic effects for Aurora B inhibition, whereas, the electronegative groups with hydrogen bond donating capacity showed a great impact on the inhibitory activity for the derivatives of GSK1070916. Additionally, the predictive model of the SNS-314 class revealed the great importance of hydrophobic favorable contour, since hydrophobic favorable substituents added to this region bind to a deep and narrow hydrophobic pocket composed of residues that are hydrophobic in nature and thus enhanced the inhibitory activity. Moreover, based on the docking study, a further comparison of the binding modes was accomplished to identify a set of critical residues that play a key role in stabilizing the drug-target interactions. Overall, the high level of consistency between the 3D contour maps and the topographical features of binding sites led to our identification of several key structural requirements for more potency inhibitors. Taken together, the results will serve as a basis for future drug development of inhibitors against Aurora B kinase for various tumors.

  9. 3D-QSAR and docking studies of 3-Pyridine heterocyclic derivatives as potent PI3K/mTOR inhibitors

    NASA Astrophysics Data System (ADS)

    Yang, Wenjuan; Shu, Mao; Wang, Yuanqiang; Wang, Rui; Hu, Yong; Meng, Lingxin; Lin, Zhihua

    2013-12-01

    Phosphoinosmde-3-kinase/ mammalian target of rapamycin (PI3K/mTOR) dual inhibitors have attracted a great deal of interest as antitumor drugs research. In order to design and optimize these dual inhibitors, two types of 3D-quantitative structure-activity relationship (3D-QSAR) studies based on the ligand alignment and receptor alignment were applied using the comparative molecular field analysis (CoMFA) and comparative molecular similarity indices analysis (CoMSIA). In the study based on ligands alignment, models of PI3K (CoMFA with r2, 0.770; q2, 0.622; CoMSIA with r2, 0.945; q2, 0.748) and mTOR (CoMFA with r2, 0.850; q2, 0.654; CoMSIA with r2, 0.983; q2, 0.676) have good predictability. And in the study based on receptor alignment, models of PI3K (CoMFA with r2, 0.745; q2, 0.538; CoMSIA with r2, 0.938; q2, 0.630) and mTOR (CoMFA with r2, 0.977; q2, 0.825; CoMSIA with r2, 0.985; q2, 0.728) also have good predictability. 3D contour maps and docking results suggested different groups on the core parts of the compounds could enhance the biological activities. Finally, ten derivatives as potential candidates of PI3K/mTOR inhibitors with good predicted activities were designed.

  10. Drug Design for CNS Diseases: Polypharmacological Profiling of Compounds Using Cheminformatic, 3D-QSAR and Virtual Screening Methodologies

    PubMed Central

    Nikolic, Katarina; Mavridis, Lazaros; Djikic, Teodora; Vucicevic, Jelica; Agbaba, Danica; Yelekci, Kemal; Mitchell, John B. O.

    2016-01-01

    HIGHLIGHTS Many CNS targets are being explored for multi-target drug designNew databases and cheminformatic methods enable prediction of primary pharmaceutical target and off-targets of compoundsQSAR, virtual screening and docking methods increase the potential of rational drug design The diverse cerebral mechanisms implicated in Central Nervous System (CNS) diseases together with the heterogeneous and overlapping nature of phenotypes indicated that multitarget strategies may be appropriate for the improved treatment of complex brain diseases. Understanding how the neurotransmitter systems interact is also important in optimizing therapeutic strategies. Pharmacological intervention on one target will often influence another one, such as the well-established serotonin-dopamine interaction or the dopamine-glutamate interaction. It is now accepted that drug action can involve plural targets and that polypharmacological interaction with multiple targets, to address disease in more subtle and effective ways, is a key concept for development of novel drug candidates against complex CNS diseases. A multi-target therapeutic strategy for Alzheimer‘s disease resulted in the development of very effective Multi-Target Designed Ligands (MTDL) that act on both the cholinergic and monoaminergic systems, and also retard the progression of neurodegeneration by inhibiting amyloid aggregation. Many compounds already in databases have been investigated as ligands for multiple targets in drug-discovery programs. A probabilistic method, the Parzen-Rosenblatt Window approach, was used to build a “predictor” model using data collected from the ChEMBL database. The model can be used to predict both the primary pharmaceutical target and off-targets of a compound based on its structure. Several multi-target ligands were selected for further study, as compounds with possible additional beneficial pharmacological activities. Based on all these findings, it is concluded that multipotent

  11. N-tuple topological/geometric cutoffs for 3D N-linear algebraic molecular codifications: variability, linear independence and QSAR analysis.

    PubMed

    García-Jacas, C R; Marrero-Ponce, Y; Barigye, S J; Hernández-Ortega, T; Cabrera-Leyva, L; Fernández-Castillo, A

    2016-12-01

    Novel N-tuple topological/geometric cutoffs to consider specific inter-atomic relations in the QuBiLS-MIDAS framework are introduced in this manuscript. These molecular cutoffs permit the taking into account of relations between more than two atoms by using (dis-)similarity multi-metrics and the concepts related with topological and Euclidean-geometric distances. To this end, the kth two-, three- and four-tuple topological and geometric neighbourhood quotient (NQ) total (or local-fragment) spatial-(dis)similarity matrices are defined, to represent 3D information corresponding to the relations between two, three and four atoms of the molecular structures that satisfy certain cutoff criteria. First, an analysis of a diverse chemical space for the most common values of topological/Euclidean-geometric distances, bond/dihedral angles, triangle/quadrilateral perimeters, triangle area and volume was performed in order to determine the intervals to take into account in the cutoff procedures. A variability analysis based on Shannon's entropy reveals that better distribution patterns are attained with the descriptors based on the cutoffs proposed (QuBiLS-MIDAS NQ-MDs) with regard to the results obtained when all inter-atomic relations are considered (QuBiLS-MIDAS KA-MDs - 'Keep All'). A principal component analysis shows that the novel molecular cutoffs codify chemical information captured by the respective QuBiLS-MIDAS KA-MDs, as well as information not captured by the latter. Lastly, a QSAR study to obtain deeper knowledge of the contribution of the proposed methods was carried out, using four molecular datasets (steroids (STER), angiotensin converting enzyme (ACE), thermolysin inhibitors (THER) and thrombin inhibitors (THR)) widely used as benchmarks in the evaluation of several methodologies. One to four variable QSAR models based on multiple linear regression were developed for each compound dataset following the original division into training and test sets. The

  12. Molecular modeling study of CP-690550 derivatives as JAK3 kinase inhibitors through combined 3D-QSAR, molecular docking, and dynamics simulation techniques.

    PubMed

    Wang, Jing Li; Cheng, Li Ping; Wang, Tian Chi; Deng, Wei; Wu, Fan Hong

    2017-03-01

    To develop more potent JAK3 kinase inhibitors, a series of CP-690550 derivatives were investigated using combined molecular modeling techniques, such as 3D-QSAR, molecular docking and molecular dynamics (MD). The leave-one-out correlation (q(2)) and non-cross-validated correlation coefficient (r(2)) of the best CoMFA model are 0.715 and 0.992, respectively. The q(2) and r(2) values of the best CoMSIA model are 0.739 and 0.995, respectively. The steric, electrostatic, and hydrophobic fields played important roles in determining the inhibitory activity of CP-690550 derivatives. Some new JAK3 kinase inhibitors were designed. Some of them have better inhibitory activity than the most potent Tofacitinib (CP-690550). Molecular docking was used to identify some key amino acid residues at the active site of JAK3 protein. 10ns MD simulations were successfully performed to confirm the detailed binding mode and validate the rationality of docking results. The calculation of the binding free energies by MMPBSA method gives a good correlation with the predicted biological activity. To our knowledge, this is the first report on MD simulations and free energy calculations for this series of compounds. The combination results of this study will be valuable for the development of potent and novel JAK3 kinase inhibitors.

  13. 3D-QSAR and molecular modeling studies on 2,3-dideoxy hexenopyranosid-4-uloses as anti-tubercular agents targeting alpha-mannosidase.

    PubMed

    Shah, Priyanka; Saquib, Mohammad; Sharma, Smriti; Husain, Irfan; Sharma, Sandeep K; Singh, Vinayak; Srivastava, Ranjana; Shaw, Arun K; Siddiqi, Mohammad Imran

    2015-04-01

    Ligand-based and structure-based methods were applied in combination to exploit the physicochemical properties of 2,3-dideoxy hex-2-enopyranosid-4-uloses against Mycobacterium tuberculosis H37Rv. Statistically valid 3D-QSAR models with good correlation and predictive power were obtained with CoMFA steric and electrostatic fields (r(2) = 0.797, q(2) = 0.589) and CoMSIA with combined steric, electrostatic, hydrophobic and hydrogen bond acceptor fields (r(2) = 0.867, q(2) = 0.570) based on training set of 33 molecules with predictive r(2) of 0.808 and 0.890 for CoMFA and CoMSIA respectively. The results illustrate the requirement of optimal alkyl chain length at C-1 position and acceptor groups along hydroxy methyl substituent of C-6 to enhance the anti-tubercular activity of the 2,3-dideoxy hex-2-enopyranosid-4-uloses while any substitution at C-3 position exert diminishing effect on anti-tubercular activity of these enulosides. Further, homology modeling of M. tuberculosis alpha-mannosidase followed by molecular docking and molecular dynamics simulations on co-complexed models were performed to gain insight into the rationale for binding affinity of selected inhibitors with the target of interest. The comprehensive information obtained from this study will help to better understand the structural basis of biological activity of this class of molecules and guide further design of more potent analogues as anti-tubercular agents.

  14. 3D-QSAR Studies on Thiazolidin-4-one S1P1 Receptor Agonists by CoMFA and CoMSIA

    PubMed Central

    Qian, Chuiwen; Zheng, Junxia; Xiao, Gaokeng; Guo, Jialiang; Yang, Zhaoqi; Huang, Li; Chao, Wei; Rao, Longyi; Sun, Pinghua

    2011-01-01

    Selective S1P1 receptor agonists have therapeutic potential to treat a variety of immune-mediated diseases. A series of 2-imino-thiazolidin-4-one derivatives displaying potent S1P1 receptor agonistic activity were selected to establish 3D-QSAR models using CoMFA and CoMSIA methods. Internal and external cross-validation techniques were investigated as well as some measures including region focusing, progressive scrambling, bootstraping and leave-group-out. The satisfactory CoMFA model predicted a q2 value of 0.751 and an r2 value of 0.973, indicating that electrostatic and steric properties play a significant role in potency. The best CoMSIA model, based on a combination of steric, electrostatic, hydrophobic and H-bond donor descriptors, predicted a q2 value of 0.739 and an r2 value of 0.923. The models were graphically interpreted using contour plots which gave more insight into the structural requirements for increasing the activity of a compound, providing a solid basis for future rational design of more active S1P1 receptor agonists. PMID:22072901

  15. 3D QSAR STUDIES ON A SERIES OF QUINAZOLINE DERRIVATIVES AS TYROSINE KINASE (EGFR) INHIBITOR: THE K-NEAREST NEIGHBOR MOLECULAR FIELD ANALYSIS APPROACH

    PubMed Central

    Noolvi, Malleshappa N.; Patel, Harun M.

    2010-01-01

    Epidermal growth factor receptor (EGFR) protein tyrosine kinases (PTKs) are known for its role in cancer. Quinazoline have been reported to be the molecules of interest, with potent anticancer activity and they act by binding to ATP site of protein kinases. ATP binding site of protein kinases provides an extensive opportunity to design newer analogs. With this background, we report an attempt to discern the structural and physicochemical requirements for inhibition of EGFR tyrosine kinase. The k-Nearest Neighbor Molecular Field Analysis (kNN-MFA), a three dimensional quantitative structure activity relationship (3D- QSAR) method has been used in the present case to study the correlation between the molecular properties and the tyrosine kinase (EGFR) inhibitory activities on a series of quinazoline derivatives. kNNMFA calculations for both electrostatic and steric field were carried out. The master grid maps derived from the best model has been used to display the contribution of electrostatic potential and steric field. The statistical results showed significant correlation coefficient r2 (q2) of 0.846, r2 for external test set (pred_r2) 0.8029, coefficient of correlation of predicted data set (pred_r2se) of 0.6658, degree of freedom 89 and k nearest neighbor of 2. Therefore, this study not only casts light on binding mechanism between EGFR and its inhibitors, but also provides hints for the design of new EGFR inhibitors with observable structural diversity PMID:24825983

  16. New series of morpholine and 1,4-oxazepane derivatives as dopamine D4 receptor ligands: synthesis and 3D-QSAR model.

    PubMed

    Audouze, Karine; Nielsen, Elsebet Østergaard; Peters, Dan

    2004-06-03

    Since the identification of the dopamine D(4) receptor subtype and speculations about its possible involvement in schizophrenia, much work has been put into development of selective D(4) ligands. These selective ligands may be effective antipsychotics without extrapyramidal side effects. This work describes the synthesis of a new series of 2,4-disubstituted morpholines and 2,4-disubstituted 1,4-oxazepanes with selectivity for the dopamine D(4) receptor. A 3D-QSAR analysis using the GRID/GOLPE methodology was performed with the purpose to get a better understanding of the relationship between chemical structure and biological activity. Inspection of the coefficient plots allowed us to identify that regions which are important for affinity are situated around the two benzene ring systems, a p-chlorobenzyl group, and the aliphatic amine belonging to the morpholine or 1,4-oxazepane system. In addition, the size of the morpholine or 1,4-oxazepane ring seems to be important for affinity.

  17. Design, biological evaluation and 3D QSAR studies of novel dioxin-containing triaryl pyrazoline derivatives as potential B-Raf inhibitors.

    PubMed

    Yang, Yu-Shun; Yang, Bing; Zou, Yan; Li, Guigen; Zhu, Hai-Liang

    2016-07-01

    A series of novel dioxin-containing triaryl pyrazoline derivatives C1-C20 have been synthesized. Their B-Raf inhibitory and anti-proliferation activities were evaluated. Compound C6 displayed the most potent biological activity against B-Raf(V600E) and WM266.4 human melanoma cell line with corresponding IC50 value of 0.04μM and GI50 value of 0.87μM, being comparable with the positive controls and more potent than our previous best compounds. Moreover, C6 was selective for B-Raf(V600E) from B-Raf(WT), C-Raf and EGFR and low toxic. The docking simulation suggested the potent bioactivity might be caused by breaking the limit of previous binding pattern. A new 3D QSAR model was built with the activity data and binding conformations to conduct visualized SAR discussion as well as to introduce new directions. Stretching the backbone to outer space or totally reversing the backbone are both potential orientations for future researches.

  18. Synthesis, antiviral activity, 3D-QSAR, and interaction mechanisms study of novel malonate derivatives containing quinazolin-4(3H)-one moiety.

    PubMed

    Chen, Meihang; Li, Pei; Hu, Deyu; Zeng, Song; Li, Tianxian; Jin, Linhong; Xue, Wei; Song, Baoan

    2016-01-01

    A series of novel malonate derivatives containing quinazolin-4(3H)-one moiety were synthesized and evaluated for their antiviral activities against cucumber mosaic virus (CMV). Results indicated that the title compounds exhibited good antiviral activities. Notably, compounds g15, g16, g17, and g18 exhibited excellent curative activities in vivo against CMV, with 50% effective concentration (EC50) values of 208.36, 153.78, 181.47, and 164.72μg/mL, respectively, which were better than that of Ningnanmycin (256.35μg/mL) and Ribavirin (523.34μg/mL). Moreover, statistically valid three-dimensional quantitative structure-activity relationship (3D-QSAR) models with good correlation and predictive power were obtained with comparative molecular field analysis (CoMFA) steric and electrostatic fields (r(2)=0.990, q(2)=0.577) and comparative molecular similarity indices analysis (CoMSIA) with combined steric, electrostatic, hydrophobic and hydrogen bond acceptor fields (r(2)=0.977, q(2)=0.516), respectively. Based on those models, compound g25 was designed, synthesized, and showed better curative activity (146.30μg/mL) than that of compound g16. The interaction of between cucumber mosaic virus coat protein (CMV CP) and g25 with 1:1.83 ratio is typically spontaneous and exothermic with micromole binding affinity by isothermal titration calorimetry (ITC) and fluorescence spectroscopy investigation.

  19. Combined CoMFA and CoMSIA 3D-QSAR study of benzimidazole and benzothiophene derivatives with selective affinity for the CB2 cannabinoid receptor.

    PubMed

    Romero-Parra, Javier; Chung, Hery; Tapia, Ricardo A; Faúndez, Mario; Morales-Verdejo, Cesar; Lorca, Marcos; Lagos, Carlos F; Di Marzo, Vincenzo; David Pessoa-Mahana, C; Mella, Jaime

    2017-04-01

    The preceding years have brought an exponential increase in our understanding of the endocannabinoid system (ECS), including the knowledge of CB1 and CB2 cannabinoid receptors, endocannabinoids, and the enzymes that synthesize and degrade endocannabinoids. Among these ECS components CB2 receptors have been the subject of considerable attention, primarily due to their promising therapeutic potential to treat numerous pathologies while avoiding the adverse psychotropic effects that can accompany CB1 receptor-based therapies. Recently, our research group has reported a new series of non-cytotoxic benzo[d]imidazoles and benzo[b]thiophenes displaying high CB2/CB1 selectivity index. In order to investigate the structural requirements for CB2 ligands and to derive a predictive model that can be used for the design of novel selective CB2 ligands, a three-dimensional quantitative structure-activity relationship (3D-QSAR) study was performed on the above mentioned chemical series employing comparative molecular field analysis (CoMFA) and comparative molecular similarity index analysis (CoMSIA) techniques. The CoMFA and CoMSIA models displayed high external predictability (rpred(2) 0.919 and 0.908) and good statistical robustness. Valuable information regarding the steric, electrostatic and hydrophobic properties of the molecules was obtained, and several modifications around both heterocycles were evaluated with the aim to generate new promising series of benzo[d]imidazoles and benzo[b]thiophenes derivatives displaying high CB2 selectivity and low toxicity.

  20. 3D-QSAR Studies on Barbituric Acid Derivatives as Urease Inhibitors and the Effect of Charges on the Quality of a Model.

    PubMed

    Ul-Haq, Zaheer; Ashraf, Sajda; Al-Majid, Abdullah Mohammed; Barakat, Assem

    2016-04-30

    Urease enzyme (EC 3.5.1.5) has been determined as a virulence factor in pathogenic microorganisms that are accountable for the development of different diseases in humans and animals. In continuance of our earlier study on the helicobacter pylori urease inhibition by barbituric acid derivatives, 3D-QSAR (three dimensional quantitative structural activity relationship) advance studies were performed by Comparative Molecular Field Analysis (CoMFA) and Comparative Molecular Similarity Indices Analysis (CoMSIA) methods. Different partial charges were calculated to examine their consequences on the predictive ability of the developed models. The finest developed model for CoMFA and CoMSIA were achieved by using MMFF94 charges. The developed CoMFA model gives significant results with cross-validation (q²) value of 0.597 and correlation coefficients (r²) of 0.897. Moreover, five different fields i.e., steric, electrostatic, and hydrophobic, H-bond acceptor and H-bond donors were used to produce a CoMSIA model, with q² and r² of 0.602 and 0.98, respectively. The generated models were further validated by using an external test set. Both models display good predictive power with r²pred ≥ 0.8. The analysis of obtained CoMFA and CoMSIA contour maps provided detailed insight for the promising modification of the barbituric acid derivatives with an enhanced biological activity.

  1. 3D-QSAR Studies on Barbituric Acid Derivatives as Urease Inhibitors and the Effect of Charges on the Quality of a Model

    PubMed Central

    Ul-Haq, Zaheer; Ashraf, Sajda; Al-Majid, Abdullah Mohammed; Barakat, Assem

    2016-01-01

    Urease enzyme (EC 3.5.1.5) has been determined as a virulence factor in pathogenic microorganisms that are accountable for the development of different diseases in humans and animals. In continuance of our earlier study on the helicobacter pylori urease inhibition by barbituric acid derivatives, 3D-QSAR (three dimensional quantitative structural activity relationship) advance studies were performed by Comparative Molecular Field Analysis (CoMFA) and Comparative Molecular Similarity Indices Analysis (CoMSIA) methods. Different partial charges were calculated to examine their consequences on the predictive ability of the developed models. The finest developed model for CoMFA and CoMSIA were achieved by using MMFF94 charges. The developed CoMFA model gives significant results with cross-validation (q2) value of 0.597 and correlation coefficients (r2) of 0.897. Moreover, five different fields i.e., steric, electrostatic, and hydrophobic, H-bond acceptor and H-bond donors were used to produce a CoMSIA model, with q2 and r2 of 0.602 and 0.98, respectively. The generated models were further validated by using an external test set. Both models display good predictive power with r2pred ≥ 0.8. The analysis of obtained CoMFA and CoMSIA contour maps provided detailed insight for the promising modification of the barbituric acid derivatives with an enhanced biological activity. PMID:27144563

  2. Conformation depends on 4D-QSAR analysis using EC-GA method: pharmacophore identification and bioactivity prediction of TIBOs as non-nucleoside reverse transcriptase inhibitors.

    PubMed

    Akyüz, Lalehan; Sarıpınar, Emin

    2013-08-01

    The electron conformational and genetic algorithm methods (EC-GA) were integrated for the identification of the pharmacophore group and predicting the anti HIV-1 activity of tetrahydroimidazo[4,5,1-jk][1,4]benzodiazepinone (TIBO) derivatives. To reveal the pharmacophore group, each conformation of all compounds was arranged by electron conformational matrices of congruity. Multiple comparisons of these matrices, within given tolerances for high active and low active TIBO derivatives, allow the identification of the pharmacophore group that refers to the electron conformational submatrix of activity. The effects of conformations, internal and external validation were investigated by four different models based on an ensemble of conformers and a single conformer, both with and without a test set. Model 1 using an ensemble of conformers for the training (39 compounds) and test sets (13 compounds), obtained by the optimum seven parameters, gave satisfactory results (R²(training) = 0.878, R²(test)= 0.910, q² = 0.840, q²(ext1) = 0.926 and q²(ext2) = 0.900).

  3. 3D QSAR studies on binding affinities of coumarin natural products for glycosomal GAPDH of Trypanosoma cruzi

    NASA Astrophysics Data System (ADS)

    Menezes, Irwin R. A.; Lopes, Julio C. D.; Montanari, Carlos A.; Oliva, Glaucius; Pavão, Fernando; Castilho, Marcelo S.; Vieira, Paulo C.; Pupo, M.^onica T.

    2003-05-01

    Drug design strategies based on Comparative Molecular Field Analysis (CoMFA) have been used to predict the activity of new compounds. The major advantage of this approach is that it permits the analysis of a large number of quantitative descriptors and uses chemometric methods such as partial least squares (PLS) to correlate changes in bioactivity with changes in chemical structure. Because it is often difficult to rationalize all variables affecting the binding affinity of compounds using CoMFA solely, the program GRID was used to describe ligands in terms of their molecular interaction fields, MIFs. The program VolSurf that is able to compress the relevant information present in 3D maps into a few descriptors can treat these GRID fields. The binding affinities of a new set of compounds consisting of 13 coumarins, for one of which the three-dimensional ligand-enzyme bound structure is known, were studied. A final model based on the mentioned programs was independently validated by synthesizing and testing new coumarin derivatives. By relying on our knowledge of the real physical data (i.e., combining crystallographic and binding affinity results), it is also shown that ligand-based design agrees with structure-based design. The compound with the highest binding affinity was the coumarin chalepin, isolated from Rutaceae species, with an IC50 value of 55.5 μM towards the enzyme glyceraldehyde-3-phosphate dehydrogenase (gGAPDH) from glycosomes of the parasite Trypanosoma cruzi, the causative agent of Chagas' disease. The proposed models from GRID MIFs have revealed the importance of lipophilic interactions in modulating the inhibition, but without excluding the dependence on stereo-electronic properties as found from CoMFA fields.

  4. Molecular modeling studies on series of Btk inhibitors using docking, structure-based 3D-QSAR and molecular dynamics simulation: a combined approach.

    PubMed

    Balasubramanian, Pavithra K; Balupuri, Anand; Cho, Seung Joo

    2016-03-01

    Bruton tyrosine kinase (Btk) is a non-receptor tyrosine kinase. It is a crucial component in BCR pathway and expressed only in hematopoietic cells except T cells and Natural killer cells. BTK is a promising target because of its involvement in signaling pathways and B cell diseases such as autoimmune disorders and lymphoma. In this work, a combined molecular modeling study of molecular docking, 3D-QSAR and molecular dynamic (MD) simulation were performed on a series of 2,5-diaminopyrimidine compounds as inhibitors targeting Btk kinase to understand the interaction and key residues involved in the inhibition. A structure based CoMFA (q (2) = 0.675, NOC = 5, r (2) = 0.961) and COMSIA (q (2) = 0.704, NOC = 6, r (2) = 0.962) models were developed from the conformation obtained by docking. The developed models were subjected to various validation techniques such as leave-five-out, external test set, bootstrapping, progressive sampling and rm (2) metrics and found to have a good predictive ability in both internal and external validation. Our docking results showed the important residues that interacts in the active site residues in inhibition of Btk kinase. Furthermore, molecular dynamics simulation was employed to study the stability of the docked conformation and to investigate the binding interactions in detail. The MD simulation analyses identified several important hydrogen bonds with Btk, including the gatekeeper residue Thr474 and Met477 at the hinge region. Hydrogen bond with active site residues Leu408 and Arg525 were also recognized. A good correlation between the MD results, docking studies and the contour map analysis are observed. This indicates that the developed models are reliable. Our results from this study can provide insights in the designing and development of more potent Btk kinase inhibitors.

  5. Understanding the Molecular Determinant of Reversible Human Monoamine Oxidase B Inhibitors Containing 2H-chromen-2-One Core: Structure-Based and Ligand-Based Derived 3-D QSAR Predictive Models.

    PubMed

    Mladenovic, Milan; Patsilinakos, Alexandros; Pirolli, Adele; Sabatino, Manuela; Ragno, Rino

    2017-03-14

    Monoamine oxidase B (MAO B) catalyzes the oxidative deamination of aryalkylamines neurotransmitters with concomitant reduction of oxygen to hydrogen peroxide. Consequently, the enzyme's malfunction can induce oxidative damage to mitochondrial DNA and mediates development of Parkinson's disease. Thus, MAO B emerges as a promising target for developing pharmaceuticals potentially useful to treat this vicious neurodegenerative condition. Aiming to contribute to the development of drugs with the reversible mechanism of MAO B inhibition only, herein, an extended in silico-in vitro procedure for the selection of novel MAO B inhibitors is demonstrated, including: (1) definition of optimized and validated structure-based (SB) 3-D QSAR models derived from available co-crystallized inhibitor-MAO B complexes; (2) elaboration of structure-activity relationships (SAR) features for either irreversible or reversible MAO B inhibitors to characterize and improve coumarin-based inhibitor activity (Protein Data Bank ID: 2V61) as the most potent reversible lead compound; (3) definition of structure-based (SB) and ligand-based (LB) alignment rules assessments by which virtually any untested potential MAO B inhibitor might be evaluated; (4) predictive ability validation of the best 3-D QSAR model through SB/LB modeling of four coumarin-based external test sets (267 compounds); (5) design and SB/LB alignment of novel coumarin-based scaffolds experimentally validated through synthesis and biological evaluation in vitro. Due to the wide range of molecular diversity within the 3-D QSARs training set and derived features, the selected N probe-derived 3-D QSAR model proves to be a valuable tool for virtual screening (VS) of novel MAO B inhibitors and a platform for design, synthesis and evaluation of novel active structures. Accordingly, six highly active and selective MAO B inhibitors (picomolar to low nanomolar range of activity) were disclosed as a result of rational SB/LB 3-D QSAR design

  6. Development of a 3D-QSAR model for acetylcholinesterase inhibitors using a combination of fingerprint, docking, and structure-based pharmacophore approaches - Conference Abstract

    EPA Science Inventory

    Acetylcholinesterase (AChE), a serine hydrolase vital for regulating the neurotransmitter acetylcholine in animals, has been used as a target for drugs and pesticides. With the increasing availability of AChE crystal structures, with or without ligands bound, structure-based appr...

  7. Development of 3D-QSAR model for acetylcholinesterase inhibitors using a combination of fingerprint, molecular docking, and structure-based pharmacophore approaches

    EPA Science Inventory

    Acetylcholinesterase (AChE), a serine hydrolase vital for regulating the neurotransmitter acetylcholine in animals, has been used as a target for drugs and pesticides. With the increasing availability of AChE crystal structures, with or without ligands bound, structure-based appr...

  8. The 3-D QSAR study of anticancer 1-N-substituted imidazo- and pyrrolo-quinoline-4,9-dione derivatives by CoMFA and CoMSIA.

    PubMed

    Suh, M E; Kang, M J; Park, S Y

    2001-11-01

    The 3-D QSAR analysis with new imidazo- and pyrrolo-quinolinedione derivatives was conducted by Comparative Molecular Field Analysis (CoMFA) and Comparative Molecular Similarity Indices Analysis (CoMSIA). When crossvalidation value (q(2)) is 0.844 at four components, the Pearson correlation coefficient (r(2)) of the CoMFA is 0.964. In the CoMSIA, q(2) is 0.709 at six components and r(2) is 0.969. Unknown samples were analyzed, using QSAR analyzed results from the CoMFA and CoMSIA methods. Excellent agreement was obtained between, with an error range of 0.01-0.15 the calculated values and measured in vitro cytotoxic activities against human lung A-549 cancer cell lines.

  9. Pharmacophore identification and validation study of CK2 inhibitors using CoMFA/CoMSIA.

    PubMed

    Morshed, Mohammad Neaz; Muddassar, Muhammad; Pasha, Farhan Ahmad; Cho, Seung Joo

    2009-08-01

    Protein kinase CK2, also known as casein kinase-2, has been found to be involved in cell growth, proliferation and suppression of apoptosis, which is related to human cancers. The series of compounds were identified as casein kinase-2 inhibitors and their inhibitory activities are a function of a variation of their structures. The current study deals with the pharmacophore identification and, accordingly, the three-dimensional quantitative structure-activity relationship model development using Pharmacophore Alignment and Scoring Engine. Several hypotheses were developed for the molecular alignments. On the basis of statistical values, the best-fitted model was identified and the same alignment was used for 3D-QSAR using comparative molecular field analysis/comparative molecular similarity index analysis. Both the CoMFA (R(2)(CV) = 0.58, R(2) = 0.82 and r(2)(pred) = 0.62) and the comparative molecular similarity index analysis (R(2)(CV) = 0.74, R(2) = 0.98 and r(2)(pred) = 0.81) gave reasonable results. Besides pharmacophore-based alignment, the maximum common substructure-based alignment was also used for the comparative molecular field analysis and comparative molecular similarity index analysis. The pharmacophore-based alignment was more prominent and it has provided important information for the modelling of potent inhibitors. The overall study implies that a highly positive and bulky group with H-bond donating property is desirable around the nitrogen atom adjacent to the pyrrolidine ring.

  10. Molecular modeling studies of [6,6,5] Tricyclic Fused Oxazolidinones as FXa inhibitors using 3D-QSAR, Topomer CoMFA, molecular docking and molecular dynamics simulations.

    PubMed

    Xu, Cheng; Ren, Yujie

    2015-10-15

    Coagulation factor Xa (Factor Xa, FXa) is a particularly promising target for novel anticoagulant therapy. The first oral factor Xa inhibitor has been approved in the EU and Canada in 2008. In this work, 38 [6,6,5] Tricyclic Fused Oxazolidinones were studied using a combination of molecular modeling techniques including three-dimensional quantitative structure-activity relationship (3D-QSAR), molecular docking, molecular dynamics and Topomer CoMFA (comparative molecular field analysis) were used to build 3D-QSAR models. The results show that the best CoMFA model has q(2)=0.511 and r(2)=0.984, the best CoMSIA (comparative molecular similarity indices analysis) model has q(2)=0.700 and r(2)=0.993 and the Topomer CoMFA analysis has q(2)=0.377 and r(2)=0.886. The results indicated the steric, hydrophobic, H-acceptor and electrostatic fields play key roles in models. Molecular docking and molecular dynamics explored the binding relationship of the ligand and the receptor protein.

  11. 3D-QSAR methods on the basis of ligand-receptor complexes. Application of COMBINE and GRID/GOLPE methodologies to a series of CYP1A2 ligands.

    PubMed

    Lozano, J J; Pastor, M; Cruciani, G; Gaedt, K; Centeno, N B; Gago, F; Sanz, F

    2000-05-01

    Many heterocyclic amines (HCA) present in cooked food exert a genotoxic activity when they are metabolised (N-oxidated) by the human cytochrome P450 1A2 (CYP1A2h). In order to rationalize the observed differences in activity of this enzyme on a series of 12 HCA, 3D-QSAR methods were applied on the basis of models of HCA-CYP1A2h complexes. The CYP1A2h enzyme model has been previously reported and was built by homology modeling based on cytochrome P450 BM3. The complexes were automatically generated applying the AUTODOCK software and refined using AMBER. A COMBINE analysis on the complexes identified the most important enzyme-ligand interactions that account for the differences in activity within the series. A GRID/GOLPE analysis was then performed on just the ligands, in the conformations and orientations found in the modeled complexes. The results from both methods were concordant and confirmed the advantages of incorporating structural information from series of ligand-receptor complexes into 3D-QSAR methodologies.

  12. 3D-QSAR methods on the basis of ligand-receptor complexes. Application of COMBINE and GRID/GOLPE methodologies to a series of CYP1A2 ligands

    NASA Astrophysics Data System (ADS)

    Lozano, Juan José; Pastor, Manuel; Cruciani, Gabriele; Gaedt, Katrin; Centeno, Nuria B.; Gago, Federico; Sanz, Ferran

    2000-05-01

    Many heterocyclic amines (HCA) present in cooked food exert a genotoxic activity when they are metabolised (N-oxidated) by the human cytochrome P450 1A2 (CYP1A2h). In order to rationalize the observed differences in activity of this enzyme on a series of 12 HCA, 3D-QSAR methods were applied on the basis of models of HCA-CYP1A2h complexes. The CYP1A2h enzyme model has been previously reported and was built by homology modeling based on cytochrome P450 BM3. The complexes were automatically generated applying the AUTODOCK software and refined using AMBER. A COMBINE analysis on the complexes identified the most important enzyme-ligand interactions that account for the differences in activity within the series. A GRID/GOLPE analysis was then performed on just the ligands, in the conformations and orientations found in the modeled complexes. The results from both methods were concordant and confirmed the advantages of incorporating structural information from series of ligand-receptor complexes into 3D-QSAR methodologies.

  13. Combined 3D-QSAR, molecular docking, molecular dynamics simulation, and binding free energy calculation studies on the 5-hydroxy-2H-pyridazin-3-one derivatives as HCV NS5B polymerase inhibitors.

    PubMed

    Yu, Haijing; Fang, Yu; Lu, Xia; Liu, Yongjuan; Zhang, Huabei

    2014-01-01

    The NS5B RNA-dependent RNA polymerase (RdRP) is a promising therapeutic target for developing novel anti-hepatitis C virus (HCV) drugs. In this work, a combined molecular modeling study was performed on a series of 193 5-hydroxy-2H-pyridazin-3-one derivatives as inhibitors of HCV NS5B Polymerase. The best 3D-QSAR models, including CoMFA and CoMSIA, are based on receptor (or docking). Furthermore, a 40-ns molecular dynamics (MD) simulation and binding free energy calculations using docked structures of NS5B with ten compounds, which have diverse structures and pIC50 values, were employed to determine the detailed binding process and to compare the binding modes of the inhibitors with different activities. On one side, the stability and rationality of molecular docking and 3D-QSAR results were validated by MD simulation. The binding free energies calculated by the MM-PBSA method gave a good correlation with the experimental biological activity. On the other side, by analyzing some differences between the molecular docking and the MD simulation results, we can find that the MD simulation could also remedy the defects of molecular docking. The analyses of the combined molecular modeling results have identified that Tyr448, Ser556, and Asp318 are the key amino acid residues in the NS5B binding pocket. The results from this study can provide some insights into the development of novel potent NS5B inhibitors.

  14. Comparative residue interaction analysis (CoRIA): a 3D-QSAR approach to explore the binding contributions of active site residues with ligands

    NASA Astrophysics Data System (ADS)

    Datar, Prasanna A.; Khedkar, Santosh A.; Malde, Alpeshkumar K.; Coutinho, Evans C.

    2006-06-01

    A novel approach termed comparative residue-interaction analysis (CoRIA), emphasizing the trends and principles of QSAR in a ligand-receptor environment has been developed to analyze and predict the binding affinity of enzyme inhibitors. To test this new approach, a training set of 36 COX-2 inhibitors belonging to nine families was selected. The putative binding (bioactive) conformations of inhibitors in the COX-2 active site were searched using the program DOCK. The docked configurations were further refined by a combination of Monte Carlo and simulated annealing methods with the Affinity program. The non-bonded interaction energies of the inhibitors with the individual amino acid residues in the active site were then computed. These interaction energies, plus specific terms describing the thermodynamics of ligand-enzyme binding, were correlated to the biological activity with G/PLS. The various QSAR models obtained were validated internally by cross validation and boot strapping, and externally using a test set of 13 molecules. The QSAR models developed on the CoRIA formalism were robust with good r 2, q 2 and r pred 2 values. The major highlights of the method are: adaptation of the QSAR formalism in a receptor setting to answer both the type (qualitative) and the extent (quantitative) of ligand-receptor binding, and use of descriptors that account for the complete thermodynamics of the ligand-receptor binding. The CoRIA approach can be used to identify crucial interactions of inhibitors with the enzyme at the residue level, which can be gainfully exploited in optimizing the inhibitory activity of ligands. Furthermore, it can be used with advantage to guide point mutation studies. As regards the COX-2 dataset, the CoRIA approach shows that improving Coulombic interaction with Pro528 and reducing van der Waals interaction with Tyr385 will improve the binding affinity of inhibitors.

  15. Pharmacophore based 3DQSAR of phenothiazines as specific human butyrylcholinesterase inhibitors for treatment of Alzheimer's disease.

    PubMed

    Kundaikar, Harish S; Agre, Neha P; Degani, Mariam S

    2014-01-01

    Quantitative three dimensional structure activity relationship (3D-QSAR) studies were performed on phenothiazine derivatives as Butyrylcholinesterase (BuChE) inhibitors. Pharmacophore Alignment and Scoring Engine (PHASE) was used to develop predictive Common Pharmacophore Hypotheses (CPHs). The alignment thus obtained was used for Comparative Molecular Field Analysis (CoMFA)/Comparative Molecular Similarity Indices Analysis (CoMSIA) model development. A fourpoint common pharmacophore hypothesis, comprising of one acceptor, one hydrophobic region and two aromatic ring centres was generated. A structurally diverse set of 80 molecules was used of which 56 were grouped into training set to develop the model and the rest 24 molecules into test set to validate the CoMFA/CoMSIA models. The models so developed showed a good r(2)predictive of 0.7587 for CoMFA and 0.7737 for CoMSIA. CoMFA and CoMSIA models had excellent Q(2) (cross-validated coefficient) of 0.7125 and 0.7093, respectively which showed high correlative and predictive abilities of the models. The 3-D contour maps of CoMFA/CoMSIA provided interpretable explanation of SAR for the compounds and also permitted interesting conclusions about the substituent effects on the phenothiazine derivatives. The outcomes of the study would help in the rational design of novel and potent therapeutic agents as specific BuChE inhibitors for symptomatic or disease modifying treatment of AD.

  16. Pd-catalyzed direct C-H bond functionalization of spirocyclic σ1 ligands: generation of a pharmacophore model and analysis of the reverse binding mode by docking into a 3D homology model of the σ1 receptor.

    PubMed

    Meyer, Christina; Schepmann, Dirk; Yanagisawa, Shuichi; Yamaguchi, Junichiro; Dal Col, Valentina; Laurini, Erik; Itami, Kenichiro; Pricl, Sabrina; Wünsch, Bernhard

    2012-09-27

    To explore the hydrophobic binding region of the σ(1) receptor protein, regioisomeric spirocyclic thiophenes 9-11 were developed as versatile building blocks. Regioselective α- and β-arylation using the catalyst systems PdCl(2)/bipy/Ag(2)CO(3) and PdCl(2)/P[OCH(CF(3))(2)](3)/Ag(2)CO(3) allowed the introduction of various aryl moieties at different positions in the last step of the synthesis. The increasing σ(1) affinity in the order 4 < 5/6 < 7/8 indicates that the positions of the additional aryl moiety and the S atom in the spirocyclic thiophene systems control the σ(1) affinity. The main features of the pharmacophore model developed for this class of σ(1) ligands are a positive ionizable group, a H-bond acceptor group, two hydrophobic moieties, and one hydrophobic aromatic group. Docking of the ligands into a σ(1) 3D homology model via molecular mechanics/Poisson-Boltzmann surface area calculations led to a very good correlation between the experimentally determined and estimated free energy of receptor binding. These calculations support the hypothesis of a reverse binding mode of ligands bearing the aryl moiety at the "top" (compounds 2, 3, 7, and 8) and "left" (compounds 4, 5, and 6) positions, respectively.

  17. Antimycobacterial activity evaluation, time-kill kinetic and 3D-QSAR study of C-(3-aminomethyl-cyclohexyl)-methylamine derivatives.

    PubMed

    Kumar, Deepak; Raj, K Kranthi; Bailey, MaiAnn; Alling, Torey; Parish, Tanya; Rawat, Diwan S

    2013-03-01

    A series of C-(3-aminomethyl-cyclohexyl)-methylamine derivatives were synthesized and evaluated for their antitubercular activity. Some of the compounds exhibited potent activity against Mycobacterium tuberculosis H37Rv. One of the compound having t-butyl at para position of the benzene ring showed excellent activity even better than the standard drug ethambutol with MIC value 1.1 ± 0.2 μM. The time-kill kinetics study of two most active compounds showed rapid killing of the M. tuberculosis within 4 days. Additionally atom-based quantitative structure-activity relationship (QSAR) model was developed that gave a statistically satisfying result (R(2))=0.92, Q(2)=0.75, Pearson-R=0.96 and effectively predicts the anti-tuberculosis activity of training and test set compounds.

  18. Combined 3D-QSAR, Molecular Docking and Molecular Dynamics Study on Derivatives of Peptide Epoxyketone and Tyropeptin-Boronic Acid as Inhibitors Against the β5 Subunit of Human 20S Proteasome

    PubMed Central

    Liu, Jianling; Zhang, Hong; Xiao, Zhengtao; Wang, Fangfang; Wang, Xia; Wang, Yonghua

    2011-01-01

    An abnormal ubiquitin-proteasome is found in many human diseases, especially in cancer, and has received extensive attention as a promising therapeutic target in recent years. In this work, several in silico models have been built with two classes of proteasome inhibitors (PIs) by using 3D-QSAR, homology modeling, molecular docking and molecular dynamics (MD) simulations. The study resulted in two types of satisfactory 3D-QSAR models, i.e., the CoMFA model (Q2 = 0.462, R2pred = 0.820) for epoxyketone inhibitors (EPK) and the CoMSIA model (Q2 = 0.622, R2pred = 0.821) for tyropeptin-boronic acid derivatives (TBA). From the contour maps, some key structural factors responsible for the activity of these two series of PIs are revealed. For EPK inhibitors, the N-cap part should have higher electropositivity; a large substituent such as a benzene ring is favored at the C6-position. In terms of TBA inhibitors, hydrophobic substituents with a larger size anisole group are preferential at the C8-position; higher electropositive substituents like a naphthalene group at the C3-position can enhance the activity of the drug by providing hydrogen bond interaction with the protein target. Molecular docking disclosed that residues Thr60, Thr80, Gly106 and Ser189 play a pivotal role in maintaining the drug-target interactions, which are consistent with the contour maps. MD simulations further indicated that the binding modes of each conformation derived from docking is stable and in accord with the corresponding structure extracted from MD simulation overall. These results can offer useful theoretical references for designing more potent PIs. PMID:21673924

  19. Docking and 3-D QSAR studies on indolyl aryl sulfones. Binding mode exploration at the HIV-1 reverse transcriptase non-nucleoside binding site and design of highly active N-(2-hydroxyethyl)carboxamide and N-(2-hydroxyethyl)carbohydrazide derivatives.

    PubMed

    Ragno, Rino; Artico, Marino; De Martino, Gabriella; La Regina, Giuseppe; Coluccia, Antonio; Di Pasquali, Alessandra; Silvestri, Romano

    2005-01-13

    Three-dimensional quantitative structure-activity relationship (3-D QSAR) studies and docking simulations were developed on indolyl aryl sulfones (IASs), a class of novel HIV-1 non-nucleoside reverse transcriptase (RT) inhibitors (Silvestri, et al. J. Med. Chem. 2003, 46, 2482-2493) highly active against wild type and some clinically relevant resistant strains (Y181C, the double mutant K103N-Y181C, and the K103R-V179D-P225H strain, highly resistant to efavirenz). Predictive 3-D QSAR models using the combination of GRID and GOLPE programs were obtained using a receptor-based alignment by means of docking IASs into the non-nucleoside binding site (NNBS) of RT. The derived 3-D QSAR models showed conventional correlation (r(2)) and cross-validated (q(2)) coefficients values ranging from 0.79 to 0.93 and from 0.59 to 0.84, respectively. All described models were validated by an external test set compiled from previously reported pyrryl aryl sulfones (Artico, et al. J. Med. Chem. 1996, 39, 522-530). The most predictive 3-D QSAR model was then used to predict the activity of novel untested IASs. The synthesis of six designed derivatives (prediction set) allowed disclosure of new IASs endowed with high anti-HIV-1 activities.

  20. Pharmacophore mapping of flavone derivatives for aromatase inhibition.

    PubMed

    Nagar, Shuchi; Islam, Md Ataul; Das, Suvadra; Mukherjee, Arup; Saha, Achintya

    2008-02-01

    Aromatase, which catalyses the final step in the steroidogenesis pathway of estrogen, has been target for the design of inhibitor in the treatment of hormone dependent breast cancer for postmenopausal women. The extensive SAR studies performed in the last 30 years to search for potent, selective and less toxic compounds, have led to the development of second and third generation of non-steroidal aromatase inhibitors (AI). Besides the development of synthetic compounds, several naturally occurring and synthetic flavonoids, which are ubiquitous natural phenolic compounds and mediate the host of biological activities, are found to demonstrate inhibitory effects on aromatase. The present study explores the pharmacophores, i.e., the structural requirements of flavones (Fig. 1) for inhibition of aromatase activity, using quantitative structure activity relationship (QSAR) and space modeling approaches. The classical QSAR studies generate the model (R (2) = 0.924, Q (2) = 0.895, s = 0.233) that shows the importance of aromatic rings A and C, along with substitutional requirements in meta and para positions of ring C for the activity. 3D QSAR of Comparative Molecular Field Analysis (CoMFA, R (2) = 0.996, R(2)(cv) = 0.791) and Comparative Molecular Similarity Analysis (CoMSIA, R (2) = 0.992, R(2)(cv) = 0.806) studies show contour maps of steric and hydrophobic properties and contribution of acceptor and donor of the molecule, suggesting the presence of steric hindrance due to ring C and R''-substituent, bulky hydrophobic substitution in ring A, along with acceptors at positions 11, and alpha and gamma of imidazole ring, and donor in ring C favor the inhibitory activity. Further space modeling (CATALYST) study (R = 0.941, Delta( cost ) = 96.96, rmsd = 0.876) adjudge the presence of hydrogen bond acceptor (keto functional group), hydrophobic (ring A) and aromatic rings (steric hindrance) along with critical distance among features are important for the inhibitory activity.

  1. 3D-QSAR, molecular dynamics simulations and molecular docking studies of benzoxazepine moiety as mTOR inhibitor for the treatment of lung cancer.

    PubMed

    Chaube, Udit; Chhatbar, Dhara; Bhatt, Hardik

    2016-02-01

    According to WHO statistics, lung cancer is one of the leading causes of death among all other types of cancer. Many genes get mutated in lung cancer but involvement of EGFR and KRAS are more common. Unavailability of drugs or resistance to the available drugs is the major problem in the treatment of lung cancer. In the present research, mTOR was selected as an alternative target for the treatment of lung cancer which involves PI3K/AKT/mTOR pathway. 28 synthetic mTOR inhibitors were selected from the literature. Ligand based approach (CoMFA and CoMSIA) and structure based approach (molecular dynamics simulations assisted molecular docking study) were applied for the identification of important features of benzoxazepine moiety, responsible for mTOR inhibition. Three different alignments were tried to obtain best QSAR model, of which, distil was found to be the best method, as it gave good statistical results. In CoMFA, Leave One Out (LOO) cross validated coefficients (q(2)), conventional coefficient (r(2)) and predicted correlation coefficient (r(2)pred) values were found to be 0.615, 0.990 and 0.930, respectively. Similarly in CoMSIA, q(2), r(2)ncv and r(2)pred values were found to be 0.748, 0.986 and 0.933, respectively. Molecular dynamics and simulations study revealed that B-chain of mTOR protein was stable at and above 500 FS with respect to temperature (at and above 298 K), Potential energy (at and above 7669.72 kJ/mol) and kinetic energy (at and above 4009.77 kJ/mol). Molecular docking study was performed on simulated protein of mTOR which helped to correlate interactions of amino acids surrounded to the ligand with contour maps generated by QSAR method. Important features of benzoxazepine were identified by contour maps and molecular docking study which would be useful to design novel molecules as mTOR inhibitors for the treatment of lung cancer.

  2. Design, biological evaluation and 3D QSAR studies of novel dioxin-containing pyrazoline derivatives with thiourea skeleton as selective HER-2 inhibitors.

    PubMed

    Yang, Bing; Yang, Yu-Shun; Yang, Na; Li, Guigen; Zhu, Hai-Liang

    2016-06-08

    A series of novel dioxin-containing pyrazoline derivatives with thiourea skeleton have been designed, synthesized and evaluated for their EGFR/HER-2 inhibitory and anti-proliferation activities. A majority of them displayed selective HER-2 inhibitory activity against EGFR inhibitory activity. Compound C20 displayed the most potent activity against HER-2 and MDA-MB-453 human breast cancer cell line (IC50 = 0.03 μM and GI50 = 0.15 μM), being slightly more potent than the positive control Erlotinib (IC50 = 0.16 μM and GI50 = 1.56 μM) and comparable with Lapatinib (IC50 = 0.01 μM and GI50 = 0.03 μM). It is a more exciting result that C20 was over 900 times more potent against HER-2 than against EGFR while this value was 0.19 for Erlotinib and 1.00 for Lapatinib, indicating high selectivity. The results of docking simulation indicate that the dioxin moiety occupied the exit of the active pocket and pushed the carbothioamide deep into the active site. QSAR models have been built with activity data and binding conformations to begin our work in this paper as well as to provide a reliable tool for reasonable design of EGFR/HER-2 inhibitors in future.

  3. Design, biological evaluation and 3D QSAR studies of novel dioxin-containing pyrazoline derivatives with thiourea skeleton as selective HER-2 inhibitors

    NASA Astrophysics Data System (ADS)

    Yang, Bing; Yang, Yu-Shun; Yang, Na; Li, Guigen; Zhu, Hai-Liang

    2016-06-01

    A series of novel dioxin-containing pyrazoline derivatives with thiourea skeleton have been designed, synthesized and evaluated for their EGFR/HER-2 inhibitory and anti-proliferation activities. A majority of them displayed selective HER-2 inhibitory activity against EGFR inhibitory activity. Compound C20 displayed the most potent activity against HER-2 and MDA-MB-453 human breast cancer cell line (IC50 = 0.03 μM and GI50 = 0.15 μM), being slightly more potent than the positive control Erlotinib (IC50 = 0.16 μM and GI50 = 1.56 μM) and comparable with Lapatinib (IC50 = 0.01 μM and GI50 = 0.03 μM). It is a more exciting result that C20 was over 900 times more potent against HER-2 than against EGFR while this value was 0.19 for Erlotinib and 1.00 for Lapatinib, indicating high selectivity. The results of docking simulation indicate that the dioxin moiety occupied the exit of the active pocket and pushed the carbothioamide deep into the active site. QSAR models have been built with activity data and binding conformations to begin our work in this paper as well as to provide a reliable tool for reasonable design of EGFR/HER-2 inhibitors in future.

  4. Studies of tricyclic piperazine/piperidine furnished molecules as novel integrin αvβ3/αIIbβ3 dual antagonists using 3D-QSAR and molecular docking.

    PubMed

    Yan, Yulian; Li, Yan; Zhang, Shuwei; Ai, Chunzhi

    2011-02-01

    The development of injectable integrin α(v)β(3)/α(IIb)β(3) dual antagonists attracts much attention of research for treating of acute ischemic diseases in recent years. In this work, based on a dataset composed of 102 tricyclic piperazine/piperidine furnished dual α(v)β(3) and α(IIb)β(3) antagonists, a variety of in silico modeling approaches including the comparative molecular field analysis (CoMFA), comparative similarity indices analysis (CoMSIA), and molecular docking were applied to reveal the requisite 3D structural features impacting the biological activities. Our statistical results show that the ligand-based 3D-QSAR models for both the α(v)β(3) and α(IIb)β(3) studies exhibited satisfactory internal and external predictability, i.e., for the CoMFA models, results of Q(2)=0.48, R(ncv)(2)=0.87, R(pred)(2)=0.71 for α(v)β(3) and Q(2)=0.50, R(ncv)(2)=0.85, R(pred)(2)=0.72 for α(IIb)β(3) analysis were obtained, and for the CoMSIA ones, the outcomes of Q(2)=0.55, R(ncv)(2)=0.90, R(pred)(2)=0.72 for α(v)β(3) and Q(2)=0.52, R(ncv)(2)=0.88, R(pred)(2)=0.74 for α(IIb)β(3) were achieved respectively. In addition, through a comparison between 3D-QSAR contour maps and docking results, it is revealed that that the most crucial interactions occurring between the tricyclic piperazine/piperidine derivatives and α(v)β(3)/α(IIb)β(3) receptor ligand binding pocket are H-bonding, and the key amino acids impacting the interactions are Arg214, Asn215, Ser123, and Lys253 for α(v)β(3), but Arg214, Asn215, Ser123 and Tyr190 for α(IIb)β(3) receptors, respectively. Halogen-containing groups at position 15 and 16, benzene sulfonamide substituent at position 23, and the replacement of piperazine with 4-aminopiperidine of ring B may increase the α(v)β(3)/α(IIb)β(3) antagonistic activity. The potencies for antagonists to inhibit isolated α(v)β(3) and α(IIb)β(3) are linear correlated, indicating that similar interaction mechanisms may exist for the series

  5. CoMFA and CoMSIA 3D-quantitative structure-activity relationship model on benzodiazepine derivatives, inhibitors of phosphodiesterase IV

    NASA Astrophysics Data System (ADS)

    Ducrot, Pierre; Andrianjara, Charles R.; Wrigglesworth, Roger

    2001-09-01

    Recently, we reported structurally novel PDE4 inhibitors based on 1,4-benzodiazepine derivatives. The main interest in developing bezodiazepine-based PDE4 inhibitors is in their lack of adverse effects of emesis with respect to rolipram-like compounds. A large effort has thus been made toward the structural optimization of this series. In the absence of structural information on the inhibitor binding mode into the PDE4 active site, 2D-QSAR (H-QSAR) and two 3D-QSAR (CoMFA and CoMSIA) methods were applied to improve our understanding of the molecular mechanism controlling the PDE4 affinity of the benzodiazepine derivatives. As expected, the CoMSIA 3D contour maps have provided more information on the benzodiazepine interaction mode with the PDE4 active site whereas CoMFA has built the best tool for activity prediction. The 2D pharmacophoric model derived from CoMSIA fields is consistent with the crystal structure of the PDE4 active site reported recently. The combination of the 2D and 3D-QSAR models was used not only to predict new compounds from the structural optimization process, but also to screen a large library of bezodiazepine derivatives.

  6. Design, biological evaluation and 3D QSAR studies of novel dioxin-containing pyrazoline derivatives with thiourea skeleton as selective HER-2 inhibitors

    PubMed Central

    Yang, Bing; Yang, Yu-Shun; Yang, Na; Li, Guigen; Zhu, Hai-Liang

    2016-01-01

    A series of novel dioxin-containing pyrazoline derivatives with thiourea skeleton have been designed, synthesized and evaluated for their EGFR/HER-2 inhibitory and anti-proliferation activities. A majority of them displayed selective HER-2 inhibitory activity against EGFR inhibitory activity. Compound C20 displayed the most potent activity against HER-2 and MDA-MB-453 human breast cancer cell line (IC50 = 0.03 μM and GI50 = 0.15 μM), being slightly more potent than the positive control Erlotinib (IC50 = 0.16 μM and GI50 = 1.56 μM) and comparable with Lapatinib (IC50 = 0.01 μM and GI50 = 0.03 μM). It is a more exciting result that C20 was over 900 times more potent against HER-2 than against EGFR while this value was 0.19 for Erlotinib and 1.00 for Lapatinib, indicating high selectivity. The results of docking simulation indicate that the dioxin moiety occupied the exit of the active pocket and pushed the carbothioamide deep into the active site. QSAR models have been built with activity data and binding conformations to begin our work in this paper as well as to provide a reliable tool for reasonable design of EGFR/HER-2 inhibitors in future. PMID:27273260

  7. Molecular docking and 3D-QSAR study on 4-(1H-indazol-4-yl) phenylamino and aminopyrazolopyridine urea derivatives as kinase insert domain receptor (KDR) inhibitors.

    PubMed

    Wu, Xiaoyun; Wu, Shuguang; Chen, Wen-Hua

    2012-03-01

    Vascular endothselial growth factor (VEGF) and its receptor tyrosine kinase VEGFR-2 or kinase insert domain receptor (KDR) have been identified as new promising targets for the design of novel anticancer agents. It is reported that 4-(1H-indazol-4-yl)phenylamino and aminopyrazolopyridine urea derivatives exhibit potent inhibitory activities toward KDR. To investigate how their chemical structures relate to the inhibitory activities and to identify the key structural elements that are required in the rational design of potential drug candidates of this class, molecular docking simulations and three-dimensional quantitative structure-activity relationship (3D-QSAR) methods were performed on 78 4-(1H-indazol-4-yl)phenylamino and aminopyrazolopyridine urea derivatives as KDR inhibitors. Surflex-dock was used to determine the probable binding conformations of all the compounds at the active site of KDR. As a result, multiple hydrophobic and hydrogen-bonding interactions were found to be two predominant factors that may be used to modulate the inhibitory activities. Comparative molecular field analysis (CoMFA) and comparative molecular similarity indices analysis (CoMSIA) 3D-QSAR models were developed based on the docking conformations. The CoMFA model produced statistically significant results with the cross-validated correlation coefficient q(2) of 0.504 and the non-cross-validated correlation coefficient r(2) of 0.913. The best CoMSIA model was obtained from the combination of steric, electrostatic and hydrophobic fields. Its q(2) and r(2) being 0.595 and 0.947, respectively, indicated that it had higher predictive ability than the CoMFA model. The predictive abilities of the two models were further validated by 14 test compounds, giving the predicted correction coefficients r (pred) (2) of 0.727 for CoMFA and 0.624 for CoMSIA, respectively. In addition, the CoMFA and CoMSIA models were used to guide the design of a series of new inhibitors of this class with

  8. The 3D-QSAR study of 110 diverse, dual binding, acetylcholinesterase inhibitors based on alignment independent descriptors (GRIND-2). The effects of conformation on predictive power and interpretability of the models.

    PubMed

    Vitorović-Todorović, Maja D; Cvijetić, Ilija N; Juranić, Ivan O; Drakulić, Branko J

    2012-09-01

    The 3D-QSAR analysis based on alignment independent descriptors (GRIND-2) was performed on the set of 110 structurally diverse, dual binding AChE reversible inhibitors. Three separate models were built, based on different conformations, generated following next criteria: (i) minimum energy conformations, (ii) conformation most similar to the co-crystalized ligand conformation, and (iii) docked conformation. We found that regardless on conformation used, all the three models had good statistic and predictivity. The models revealed the importance of protonated pyridine nitrogen of tacrine moiety for anti AChE activity, and recognized HBA and HBD interactions as highly important for the potency. This was revealed by the variables associated with protonated pyridinium nitrogen, and the two amino groups of the linker. MIFs calculated with the N1 (pyridinium nitrogen) and the DRY GRID probes in the AChE active site enabled us to establish the relationship between amino acid residues within AChE active site and the variables having high impact on models. External predictive power of the models was tested on the set of 40 AChE reversible inhibitors, most of them structurally different from the training set. Some of those compounds were tested on the different enzyme source. We found that external predictivity was highly sensitive on conformations used. Model based on docked conformations had superior predictive ability, emphasizing the need for the employment of conformations built by taking into account geometrical restrictions of AChE active site gorge.

  9. 3D-QSAR studies and molecular docking on [5-(4-amino-1 H-benzoimidazol-2-yl)-furan-2-yl]-phosphonic acid derivatives as fructose-1,6-biphophatase inhibitors

    NASA Astrophysics Data System (ADS)

    Lan, Ping; Xie, Mei-Qi; Yao, Yue-Mei; Chen, Wan-Na; Chen, Wei-Min

    2010-12-01

    Fructose-1,6-biphophatase has been regarded as a novel therapeutic target for the treatment of type 2 diabetes mellitus (T2DM). 3D-QSAR and docking studies were performed on a series of [5-(4-amino-1 H-benzoimidazol-2-yl)-furan-2-yl]-phosphonic acid derivatives as fructose-1,6-biphophatase inhibitors. The CoMFA and CoMSIA models using thirty-seven molecules in the training set gave r cv 2 values of 0.614 and 0.598, r 2 values of 0.950 and 0.928, respectively. The external validation indicated that our CoMFA and CoMSIA models possessed high predictive powers with r 0 2 values of 0.994 and 0.994, r m 2 values of 0.751 and 0.690, respectively. Molecular docking studies revealed that a phosphonic group was essential for binding to the receptor, and some key features were also identified. A set of forty new analogues were designed by utilizing the results revealed in the present study, and were predicted with significantly improved potencies in the developed models. The findings can be quite useful to aid the designing of new fructose-1,6-biphophatase inhibitors with improved biological response.

  10. Anilides and quinolones with nitrogen-bearing substituents from benzothiophene and thienothiophene series: synthesis, photochemical synthesis, cytostatic evaluation, 3D-derived QSAR analysis and DNA-binding properties.

    PubMed

    Aleksić, Maja; Bertoša, Branimir; Nhili, Raja; Depauw, Sabine; Martin-Kleiner, Irena; David-Cordonnier, Marie-Hélène; Tomić, Sanja; Kralj, Marijeta; Karminski-Zamola, Grace

    2014-01-01

    A series of new anilides (2a-c, 4-7, 17a-c, 18) and quinolones (3a-b, 8a-b, 9a-b, 10-15, 19) with nitrogen-bearing substituents from benzo[b]thiophene and thieno[2,3-c]thiophene series are prepared. Benzo[b]thieno[2,3-c]- and thieno[3',2':4,5]thieno[2,3-c]quinolones (3a-b, 8a-b) are synthesized by the reaction of photochemical dehydrohalogenation from corresponding anilides. Anilides and quinolones were tested for the antiproliferative activity. Fused quinolones bearing protonated aminium group, quaternary ammonium group, N-methylated and protonated aminium group, amino and protonated amino group (8a, 9b, 10-12) showed very prominent anticancer activity, whereby the hydrochloride salt of N',N'-dimethylaminopropyl-substituted quinolone (14) was the most active one, having the IC50 concentration at submicromolar range in accordance with previous QSAR predictions. On the other hand, flexible anilides were among the less active. Chemometric analysis of investigated compounds was performed. 3D-derived QSAR analysis identified solubility, metabolitic stability and the possibility of the compound to be ionized at pH 4-8 as molecular properties that are positively correlated with anticancer activity of investigated compounds, while molecular flexibility, polarizability and sum of hydrophobic surface areas were found to be negatively correlated. Anilides 2a-b, 4-7 and quinolones 3a-b, 8a-b, 9b and 10-14 were evaluated for DNA binding propensities and topoisomerases I/II inhibition as part of their mechanism of action. Among the anilides, only compound 7 presented some DNA binding propensity whereas the quinolones 8b, 9b and 10-14 intercalate in the DNA base pairs, compounds 8b, 9b and 14 being the most efficient ones. The strongest DNA intercalators, compounds 8b, 9b and 14, were clearly distinguished from the other compounds according to their molecular descriptors by the PCA and PLS analysis.

  11. Structure Optimization of Neuraminidase Inhibitors as Potential Anti-Influenza (H1N1Inhibitors) Agents Using QSAR and Molecular Docking Studies.

    PubMed

    Inamdar, Poonam; Bhandari, Shashikant; Sonawane, Bhagyashri; Hole, Asha; Jadhav, Chintamani

    2014-01-01

    The urgent need of neuraminidase inhibitors (NI) has provided an impetus for understanding the structure requisite at molecular level. Our search for selective inhibitors of neuraminidase has led to the identification of pharmacophoric requirements at various positions around acyl thiourea pharmacophore. The main objective of present study is to develop selective NI, with least toxicity and drug like ADMET properties. Electronic, Steric requirements were defined using kohnone nearest neighbour- molecular field analysis (kNN-MFA) model of 3D-QSAR studies. Results generated by QSAR studies showed that model has good internal as well as external predictivity. Such defined requirements were used to generate new chemical entities which exhibit higher promising predicted activities. To check selective binding of designed NCE's docking studies were carried out using the crystal structure of the neuraminidase enzyme having co-crystallized ligand Oseltamivir. Thus, molecular modelling provided a good platform to optimize the acyl thiourea pharmacophore for designing its derivatives having potent anti-viral activity.

  12. A search for sources of drug resistance by the 4D-QSAR analysis of a set of antimalarial dihydrofolate reductase inhibitors

    NASA Astrophysics Data System (ADS)

    Santos-Filho, Osvaldo Andrade; Hopfinger, Anton J.

    2001-01-01

    A set of 18 structurally diverse antifolates including pyrimethamine, cycloguanil, methotrexate, aminopterin and trimethoprim, and 13 pyrrolo[2,3-d]pyrimidines were studied using four-dimensional quantitative structure-activity relationship (4D-QSAR) analysis. The corresponding biological activities of these compounds include IC50 inhibition constants for both the wild type, and a specific mutant type of Plasmodium falciparum dihydrofolate reductase (DHFR). Two thousand conformations of each analog were sampled to generate a conformational ensemble profile (CEP) from a molecular dynamics simulation (MDS) of 100,000 conformer trajectory states. Each sampled conformation was placed in a 1 Å cubic grid cell lattice for each of five trial alignments. The frequency of occupation of each grid cell was computed for each of six types of pharmacophore groups of atoms of each compound. These grid cell occupancy descriptors (GCODs) were then used as a descriptor pool to construct 4D-QSAR models. Models for inhibition of both the `wild' type and the mutant enzyme were generated which provide detailed spatial pharmacophore requirements for inhibition in terms of atom types and their corresponding relative locations in space. The 4D-QSAR models indicate some structural features perhaps relevant to the mechanism of resistance of the Plasmodium falciparum DHFR to current antimalarials. One feature identified is a slightly different binding alignment of the ligands to the mutant form of the enzyme as compared to the wild type.

  13. New potent and selective cytochrome P450 2B6 (CYP2B6) inhibitors based on three-dimensional quantitative structure-activity relationship (3D-QSAR) analysis

    PubMed Central

    Korhonen, L E; Turpeinen, M; Rahnasto, M; Wittekindt, C; Poso, A; Pelkonen, O; Raunio, H; Juvonen, R O

    2007-01-01

    Background and purpose: The cytochrome P450 2B6 (CYP2B6) enzyme metabolises a number of clinically important drugs. Drug-drug interactions resulting from inhibition or induction of CYP2B6 activity may cause serious adverse effects. The aims of this study were to construct a three-dimensional structure-activity relationship (3D-QSAR) model of the CYP2B6 protein and to identify novel potent and selective inhibitors of CYP2B6 for in vitro research purposes. Experimental approach: The inhibition potencies (IC50 values) of structurally diverse chemicals were determined with recombinant human CYP2B6 enzyme. Two successive models were constructed using Comparative Molecular Field Analysis (CoMFA). Key results: Three compounds proved to be very potent and selective competitive inhibitors of CYP2B6 in vitro (IC50<1 μM): 4-(4-chlorobenzyl)pyridine (CBP), 4-(4-nitrobenzyl)pyridine (NBP), and 4-benzylpyridine (BP). A complete inhibition of CYP2B6 activity was achieved with 0.1 μM CBP, whereas other CYP-related activities were not affected. Forty-one compounds were selected for further testing and construction of the final CoMFA model. The created CoMFA model was of high quality and predicted accurately the inhibition potency of a test set (n=7) of structurally diverse compounds. Conclusions and implications: Two CoMFA models were created which revealed the key molecular characteristics of inhibitors of the CYP2B6 enzyme. The final model accurately predicted the inhibitory potencies of several structurally unrelated compounds. CBP, BP and NBP were identified as novel potent and selective inhibitors of CYP2B6 and CBP especially is a suitable inhibitor for in vitro screening studies. PMID:17325652

  14. Pharmacophore Modeling and Docking Studies on Some Nonpeptide-Based Caspase-3 Inhibitors

    PubMed Central

    Sharma, Simant; Basu, Arijit; Agrawal, R. K.

    2013-01-01

    Neurodegenerative disorders are major consequences of excessive apoptosis caused by a proteolytic enzyme known as caspase-3. Therefore, caspase-3 inhibition has become a validated therapeutic approach for neurodegenerative disorders. We performed pharmacophore modeling on some synthetic derivatives of caspase-3 inhibitors (pyrrolo[3,4-c]quinoline-1,3-diones) using PHASE 3.0. This resulted in the common pharmacophore hypothesis AAHRR.6 which might be responsible for the biological activity: two aromatic rings (R) mainly in the quinoline nucleus, one hydrophobic (H) group (CH3), and two acceptor (A) groups (–C=O). After identifying a valid hypothesis, we also developed an atom-based 3D-QSAR model applying the PLS algorithm. The developed model was statistically robust (q2 = 0.53; pred_r2 = 0.80). Additionally, we have performed molecular docking studies, cross-validated our results, and gained a deeper insight into its molecular recognition process. Our developed model may serve as a query tool for future virtual screening and drug designing for this particular target. PMID:24089669

  15. Synthesis, biological evaluation, and three-dimensional in silico pharmacophore model for sigma(1) receptor ligands based on a series of substituted benzo[d]oxazol-2(3H)-one derivatives.

    PubMed

    Zampieri, Daniele; Mamolo, Maria Grazia; Laurini, Erik; Florio, Chiara; Zanette, Caterina; Fermeglia, Maurizio; Posocco, Paola; Paneni, Maria Silvia; Pricl, Sabrina; Vio, Luciano

    2009-09-10

    Novel benzo[d]oxazol-2(3H)-one derivatives were designed and synthesized, and their affinities against sigma receptors were evaluated. On the basis of 31 compounds, a three-dimensional pharmacophore model for the sigma(1) receptor binding site was developed using the Catalyst 4.9 software package. The best 3D pharmacophore hypothesis, consisting of one positive ionizable, one hydrogen bond acceptor, two hydrophobic aromatic, and one hydrophobic features provided a 3D-QSAR model with a correlation coefficient of 0.89. The best hypothesis was also validated by three independent methods, i.e., the Fisher randomization test included in the CatScramble functionality of Catalyst, the leave-one-out test, and activity prediction of an additional test set. The achieved results will allow researchers to use this 3D pharmacophore model for the design and synthesis of a second generation of high affinity sigma(1) ligands, as well as to discover other lead compounds for this class of receptors.

  16. Correction: Xie, H.; et al. 3D QSAR studies, pharmacophore modeling and virtual screening on a series of steroidal aromatase inhibitors. Int. J. Mol. Sci. 2014, 15, 20927-20947.

    PubMed

    Xie, Huiding; Qiu, Kaixiong; Xie, Xiaoguang

    2015-03-05

    A number of sentences in the first paragraph of the introduction of [28] were copied verbatim from [21,22,25,29]. Although [21,22,25] were cited in the text, [29] was omitted and it was not made sufficiently clear that direct quotations were used. The authors wish to apologize to the authors of [21,22,25,29] and to the readers of the journal for any inconvenience.

  17. Methods and applications of structure based pharmacophores in drug discovery.

    PubMed

    Pirhadi, Somayeh; Shiri, Fereshteh; Ghasemi, Jahan B

    2013-01-01

    A pharmacophore model does not describe a real molecule or a real association of functional groups but illustrates a molecular recognition of a biological target shared by a group of compounds. Pharmacophores also represent the spatial arrangement of essential interactions in a receptor-binding pocket. Structure based pharmacophores (SBPs) can work both with a free (apo) structure or a macromolecule-ligand complex (holo) structure. The SBP methods that derive pharmacophore from protein-ligand complexes use the potential interactions observed between ligand and protein, whereas, the SBP method that aims to derive pharmacophore from ligand free protein, uses only protein active site information. Therefore SBPs do not encounter to challenging problems such as ligand flexibility, molecular alignment as well as proper selection of training set compounds in ligand based pharmacophore modeling. The current review deals with Hot Spot' analysis of binding site to feature generation, several approaches to feature reduction, and considers shape and excluded volumes to SBP model building. This review continues to represent several applications of SBPs in virtual screening especially in parallel screening approach and multi-target drug design. Also it reports the applications of SBPs in QSAR. This review emphasizes that SBPs are valuable tools for hit to lead optimization, virtual screening, scaffold hopping, and multi-target drug design.

  18. 5D-QSAR for spirocyclic sigma1 receptor ligands by Quasar receptor surface modeling.

    PubMed

    Oberdorf, Christoph; Schmidt, Thomas J; Wünsch, Bernhard

    2010-07-01

    Based on a contiguous and structurally as well as biologically diverse set of 87 sigma(1) ligands, a 5D-QSAR study was conducted in which a quasi-atomistic receptor surface modeling approach (program package Quasar) was applied. The superposition of the ligands was performed with the tool Pharmacophore Elucidation (MOE-package), which takes all conformations of the ligands into account. This procedure led to four pharmacophoric structural elements with aromatic, hydrophobic, cationic and H-bond acceptor properties. Using the aligned structures a 3D-model of the ligand binding site of the sigma(1) receptor was obtained, whose general features are in good agreement with previous assumptions on the receptor structure, but revealed some novel insights since it represents the receptor surface in more detail. Thus, e.g., our model indicates the presence of an H-bond acceptor moiety in the binding site as counterpart to the ligands' cationic ammonium center, rather than a negatively charged carboxylate group. The presented QSAR model is statistically valid and represents the biological data of all tested compounds, including a test set of 21 ligands not used in the modeling process, with very good to excellent accuracy [q(2) (training set, n=66; leave 1/3 out) = 0.84, p(2) (test set, n=21)=0.64]. Moreover, the binding affinities of 13 further spirocyclic sigma(1) ligands were predicted with reasonable accuracy (mean deviation in pK(i) approximately 0.8). Thus, in addition to novel insights into the requirements for binding of spirocyclic piperidines to the sigma(1) receptor, the presented model can be used successfully in the rational design of new sigma(1) ligands.

  19. Structure based design, synthesis, pharmacophore modeling, virtual screening, and molecular docking studies for identification of novel cyclophilin D inhibitors.

    PubMed

    Valasani, Koteswara Rao; Vangavaragu, Jhansi Rani; Day, Victor W; Yan, Shirley ShiDu

    2014-03-24

    Cyclophilin D (CypD) is a peptidyl prolyl isomerase F that resides in the mitochondrial matrix and associates with the inner mitochondrial membrane during the mitochondrial membrane permeability transition. CypD plays a central role in opening the mitochondrial membrane permeability transition pore (mPTP) leading to cell death and has been linked to Alzheimer's disease (AD). Because CypD interacts with amyloid beta (Aβ) to exacerbate mitochondrial and neuronal stress, it is a potential target for drugs to treat AD. Since appropriately designed small organic molecules might bind to CypD and block its interaction with Aβ, 20 trial compounds were designed using known procedures that started with fundamental pyrimidine and sulfonamide scaffolds know to have useful therapeutic effects. Two-dimensional (2D) quantitative structure-activity relationship (QSAR) methods were applied to 40 compounds with known IC50 values. These formed a training set and were followed by a trial set of 20 designed compounds. A correlation analysis was carried out comparing the statistics of the measured IC50 with predicted values for both sets. Selectivity-determining descriptors were interpreted graphically in terms of principle component analyses. These descriptors can be very useful for predicting activity enhancement for lead compounds. A 3D pharmacophore model was also created. Molecular dynamics simulations were carried out for the 20 trial compounds with known IC50 values, and molecular descriptors were determined by 2D QSAR studies using the Lipinski rule-of-five. Fifteen of the 20 molecules satisfied all 5 Lipinski rules, and the remaining 5 satisfied 4 of the 5 Lipinski criteria and nearly satisfied the fifth. Our previous use of 2D QSAR, 3D pharmacophore models, and molecular docking experiments to successfully predict activity indicates that this can be a very powerful technique for screening large numbers of new compounds as active drug candidates. These studies will hopefully

  20. Identification of novel inhibitors for Pim-1 kinase using pharmacophore modeling based on a novel method for selecting pharmacophore generation subsets

    NASA Astrophysics Data System (ADS)

    Shahin, Rand; Swellmeen, Lubna; Shaheen, Omar; Aboalhaija, Nour; Habash, Maha

    2016-01-01

    Targeting Proviral integration-site of murine Moloney leukemia virus 1 kinase, hereafter called Pim-1 kinase, is a promising strategy for treating different kinds of human cancer. Headed for this a total list of 328 formerly reported Pim-1 kinase inhibitors has been explored and divided based on the pharmacophoric features of the most active molecules into 10 subsets projected to represent potential active binding manners accessible to ligands within the binding pocket of Pim-1 kinase. Discovery Studio 4.1 (DS 4.1) was employed to detect potential pharmacophoric active binding manners anticipated by Pim-1 Kinase inhibitors. The pharmacophoric models were then allowed to compete within Quantitative Structure Activity Relationship (QSAR) framework with other 2D descriptors. Accordingly Genetic algorithm and multiple linear regression investigation were engaged to find the finest QSAR equation that has the best predictive power r 262 2 = 0.70, F = 119.14, r LOO 2 = 0.693, r PRESS 2 against 66 external test inhibitors = 0.71 q2 = 0.55. Three different pharmacophores appeared in the successful QSAR equation this represents three different binding modes for inhibitors within the Pim-1 kinase binding pocket. Pharmacophoric models were later used to screen compounds within the National Cancer Institute database. Several low micromolar Pim-1 Kinase inhibitors were captured. The most potent hits show IC50 values of 0.77 and 1.03 µM. Also, upon analyzing the successful QSAR Equation we found that some polycyclic aromatic electron-rich structures namely 6-Chloro-2-methoxy-acridine can be considered as putative hits for Pim-1 kinase inhibition.

  1. Identification of potential Gly/NMDA receptor antagonists by cheminformatics approach: a combination of pharmacophore modelling, virtual screening and molecular docking studies.

    PubMed

    Ugale, V G; Bari, S B

    2016-01-01

    The Gly/NMDA receptor has become known as potential target for the management of neurodegenerative diseases. Discovery of Gly/NMDA antagonists has thus attracted much attention in recent years. In the present research, a cheminformatics approach has been used to determine structural requirements for Gly/NMDA antagonism and to identify potential antagonists. Here, 37 quinoxaline derivatives were selected to develop a significant pharmacophore model with good certainty. The selected model was validated by leave-one-out cross-validation, an external test set, decoy set and Y-randomization test. Applicability domain was verified by the standardization approach. The validated 3D-QSAR model was used to screen virtual hits from the ZINC database by pharmacophore mapping. Molecular docking was used for assessment of receptor-ligand binding modes and binding affinities. The GlideScore and molecular interactions with critical amino acids were considered as crucial features to identify final hits. Furthermore, hits were analysed for in silico pharmacokinetic parameters and Lipinski's rule of five, demonstrating their potential as drug-like candidates. The PubChem and SciFinder search tools were used to authenticate the novelty of leads retrieved. Finally, five different leads have been suggested as putative novel candidates for the exploration of potent Gly/NMDA receptor antagonists.

  2. Elaborate ligand-based modeling coupled with QSAR analysis and in silico screening reveal new potent acetylcholinesterase inhibitors

    NASA Astrophysics Data System (ADS)

    Abuhamdah, Sawsan; Habash, Maha; Taha, Mutasem O.

    2013-12-01

    Inhibition of the enzyme acetylcholinesterase (AChE) has been shown to alleviate neurodegenerative diseases prompting several attempts to discover and optimize new AChE inhibitors. In this direction, we explored the pharmacophoric space of 85 AChE inhibitors to identify high quality pharmacophores. Subsequently, we implemented genetic algorithm-based quantitative structure-activity relationship (QSAR) modeling to select optimal combination of pharmacophoric models and 2D physicochemical descriptors capable of explaining bioactivity variation among training compounds ( {{r}}^{ 2}_{ 6 8} = 0. 9 4 , F-statistic = 125.8, {{r}}^{ 2}_{{LOO}} { = 0} . 9 2 , {{r}}^{ 2}_{{PRESS}} against 17 external test inhibitors = 0.84). Two orthogonal pharmacophores emerged in the QSAR equation suggesting the existence of at least two binding modes accessible to ligands within AChE binding pocket. The successful pharmacophores were comparable with crystallographically resolved AChE binding pocket. We employed the pharmacophoric models and associated QSAR equation to screen the national cancer institute list of compounds. Twenty-four low micromolar AChE inhibitors were identified. The most potent gave IC50 value of 1.0 μM.

  3. Quantitative structure-activity relationships (QSAR) of some 2,2-diphenyl propionate (DPP) derivatives of muscarinic antagonists

    SciTech Connect

    Gordon, R.K.; Breuer, E.; Padilla, F.N.; Chiang, P.K.

    1987-05-01

    QSAR between biological activities and molecular-chemical properties were investigated to aid in designing more effective and potent antimuscarinic pharmacophores. A molecular modeling program was used to calculate geometrical and topological values of a series of DPP pharmacophores. The newly synthesized pharmacophores were tested for their antagonist activities by: (1) inhibition of (N-methyl-/sup 3/H)scopolamine binding assay to the muscarinic receptors of N4TG1 neuroblastoma cells; (2) blocking of acetylcholine-induced contraction of guinea pig ileum; and (3) inhibition of carbachol-induced ..cap alpha..-amylase release from rat pancreas. The differences in the log of these biological activities were directly and significantly related to the distances between the carbonyl oxygen of the DPP and the quaternary nitrogen of the modified pharmacophores. The biological activities, while depending on each particular assay, varied between three and four logs of activity. The charge remained the same in all the pharmacophores. There were no QSAR correlations between molecular volume, molecular connectivity, or principle moments and their antagonistic activities, although multivariate QSAR was not employed. Thus, based on distance geometry, potent muscarinic pharmacophores can be predicted.

  4. Comparative Molecular Field Analysis (CoMFA) and Comparative Molecular Similarity Indices Analysis (CoMSIA) Studies on α1A-Adrenergic Receptor Antagonists Based on Pharmacophore Molecular Alignment

    PubMed Central

    Zhao, Xin; Chen, Minsheng; Huang, Biyun; Ji, Hong; Yuan, Mu

    2011-01-01

    The α1A-adrenergic receptor (α1A-AR) antagonist is useful in treating benign prostatic hyperplasia, lower urinary tract symptoms, and cardiac arrhythmia. Three-dimensional quantitative structure-activity relationship (3D-QSAR) studies were performed on a set of α1A-AR antagonists of N-aryl and N-nitrogen class. Statistically significant models constructed from comparative molecular field analysis (CoMFA) and comparative molecular similarity indices analysis (CoMSIA) were established based on a training set of 32 ligands using pharmacophore-based molecular alignment. The leave-oneout cross-validation correlation coefficients were q2 CoMFA = 0.840 and q2 CoMSIA = 0.840. The high correlation between the cross-validated/predicted and experimental activities of a test set of 12 ligands revealed that the CoMFA and CoMSIA models were robust (r2 pred/CoMFA = 0.694; r2 pred/CoMSIA = 0.671). The generated models suggested that electrostatic, hydrophobic, and hydrogen bonding interactions play important roles between ligands and receptors in the active site. Our study serves as a guide for further experimental investigations on the synthesis of new compounds. Structural modifications based on the present 3D-QSAR results may lead to the discovery of other α1A-AR antagonists. PMID:22072933

  5. Investigation on quantitative structure activity relationships and pharmacophore modeling of a series of mGluR2 antagonists.

    PubMed

    Zhang, Meng-Qi; Zhang, Xiao-Le; Li, Yan; Fan, Wen-Jia; Wang, Yong-Hua; Hao, Ming; Zhang, Shu-Wei; Ai, Chun-Zhi

    2011-01-01

    MGluR2 is G protein-coupled receptor that is targeted for diseases like anxiety, depression, Parkinson's disease and schizophrenia. Herein, we report the three-dimensional quantitative structure-activity relationship (3D-QSAR) studies of a series of 1,3-dihydrobenzo[ b][1,4]diazepin-2-one derivatives as mGluR2 antagonists. Two series of models using two different activities of the antagonists against rat mGluR2, which has been shown to be very similar to the human mGluR2, (activity I: inhibition of [(3)H]-LY354740; activity II: mGluR2 (1S,3R)-ACPD inhibition of forskolin stimulated cAMP.) were derived from datasets composed of 137 and 69 molecules respectively. For activity I study, the best predictive model obtained from CoMFA analysis yielded a Q(2) of 0.513, R(2) (ncv) of 0.868, R(2) (pred) = 0.876, while the CoMSIA model yielded a Q(2) of 0.450, R(2) (ncv) = 0.899, R(2) (pred) = 0.735. For activity II study, CoMFA model yielded statistics of Q(2) = 0.5, R(2) (ncv) = 0.715, R(2) (pred) = 0.723. These results prove the high predictability of the models. Furthermore, a combined analysis between the CoMFA, CoMSIA contour maps shows that: (1) Bulky substituents in R(7), R(3) and position A benefit activity I of the antagonists, but decrease it when projected in R(8) and position B; (2) Hydrophilic groups at position A and B increase both antagonistic activity I and II; (3) Electrostatic field plays an essential rule in the variance of activity II. In search for more potent mGluR2 antagonists, two pharmacophore models were developed separately for the two activities. The first model reveals six pharmacophoric features, namely an aromatic center, two hydrophobic centers, an H-donor atom, an H-acceptor atom and an H-donor site. The second model shares all features of the first one and has an additional acceptor site, a positive N and an aromatic center. These models can be used as guidance for the development of new mGluR2 antagonists of high activity and selectivity

  6. Search for the Pharmacophore of Histone Deacetylase Inhibitors Using Pharmacophore Query and Docking Study

    PubMed Central

    Haji Agha Bozorgi, Atefeh; Zarghi, Afshin

    2014-01-01

    Histone deacetylase inhibitors have gained a great deal of attention recently for the treatment of cancers and inflammatory diseases. So design of new inhibitors is of great importance in pharmaceutical industries and labs. Creating pharmacophor models in order to design new molecules or search a library for finding lead compounds is of great interest. This approach reduces the overall cost associated with the discovery and development of a new drug. Here we elaborated an exact pharmacophore model for histone deacetylase inhibitors by using pharmacophore query and docking study. The data set used for the modelling exercise comprised of 383 molecules collated from the original literature. These molecules were used to crating the model and docking study was held with Zolinza, the recently FDA approved drug as potent histone deacetylase inhibitor. Our model consists of 5 features: Hydrogen bond donors, Hydrogen bond acceptors, H-bond donor/acceptors, Aromatic ring centers, and hydrophobic centers. With the aid of this pharmacophore model and docking result, 3D searches in large databases can be performed, leading to a significant enrichment of active analogs. PMID:25587304

  7. Integrated ligand based pharmacophore model derived from diverse FAAH covalent ligand classes.

    PubMed

    Shen, Lingling; Huang, Hongwei; Makriyannis, Alexandros; Fisher, Luke S

    2012-12-01

    3D pharmacophore modeling is an important computational methodology for ligand-enzyme binding interactions in drug discovery. More specifically, a consensus pharmacophore model derived from diverse ligands is a key determinant upon which the prediction power of computational models is based for designing novel ligands. In this work, by merging the important pharmacophore features based on four classes of covalent FAAH ligands, and then integrating the exclusion volume spheres derived from the crystal structure, we created for the first time an integrated FAAH pharmacophore model to describe the ligand-enzyme binding interactions. This new integrated FAAH pharmacophore model can correctly predict the covalent ligand binding mode, which correlates with the SAR data. The study is expected to provide insights into novel covalent ligand-FAAH binding interactions, and facilitate the design of covalent ligands against FAAH.

  8. On various metrics used for validation of predictive QSAR models with applications in virtual screening and focused library design.

    PubMed

    Roy, Kunal; Mitra, Indrani

    2011-07-01

    Quantitative structure-activity relationships (QSARs) have important applications in drug discovery research, environmental fate modeling, property prediction, etc. Validation has been recognized as a very important step for QSAR model development. As one of the important objectives of QSAR modeling is to predict activity/property/toxicity of new chemicals falling within the domain of applicability of the developed models and QSARs are being used for regulatory decisions, checking reliability of the models and confidence of their predictions is a very important aspect, which can be judged during the validation process. One prime application of a statistically significant QSAR model is virtual screening for molecules with improved potency based on the pharmacophoric features and the descriptors appearing in the QSAR model. Validated QSAR models may also be utilized for design of focused libraries which may be subsequently screened for the selection of hits. The present review focuses on various metrics used for validation of predictive QSAR models together with an overview of the application of QSAR models in the fields of virtual screening and focused library design for diverse series of compounds with citation of some recent examples.

  9. Molecular modeling studies of 4,5-dihydro-1H-pyrazolo[4,3-h] quinazoline derivatives as potent CDK2/Cyclin a inhibitors using 3D-QSAR and docking.

    PubMed

    Ai, Yong; Wang, Shao-Teng; Sun, Ping-Hua; Song, Fa-Jun

    2010-09-28

    CDK2/cyclin A has appeared as an attractive drug targets over the years with diverse therapeutic potentials. A computational strategy based on comparative molecular fields analysis (CoMFA) and comparative molecular similarity indices analysis (CoMSIA) followed by molecular docking studies were performed on a series of 4,5-dihydro-1H-pyrazolo[4,3-h]quinazoline derivatives as potent CDK2/cyclin A inhibitors. The CoMFA and CoMSIA models, using 38 molecules in the training set, gave r(2) (cv) values of 0.747 and 0.518 and r(2) values of 0.970 and 0.934, respectively. 3D contour maps generated by the CoMFA and CoMSIA models were used to identify the key structural requirements responsible for the biological activity. Molecular docking was applied to explore the binding mode between the ligands and the receptor. The information obtained from molecular modeling studies may be helpful to design novel inhibitors of CDK2/cyclin A with desired activity.

  10. NEW 3D TECHNIQUES FOR RANKING AND PRIORITIZATION OF CHEMICAL INVENTORIES

    EPA Science Inventory

    New three-dimensional quantitative structure activity (3-D QSAR) techniques for prioritizing chemical inventories for endocrine activity will be presented. The Common Reactivity Pattern (COREPA) approach permits identification of common steric and/or electronic patterns associate...

  11. Uncertainty in QSAR predictions.

    PubMed

    Sahlin, Ullrika

    2013-03-01

    It is relevant to consider uncertainty in individual predictions when quantitative structure-activity (or property) relationships (QSARs) are used to support decisions of high societal concern. Successful communication of uncertainty in the integration of QSARs in chemical safety assessment under the EU Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) system can be facilitated by a common understanding of how to define, characterise, assess and evaluate uncertainty in QSAR predictions. A QSAR prediction is, compared to experimental estimates, subject to added uncertainty that comes from the use of a model instead of empirically-based estimates. A framework is provided to aid the distinction between different types of uncertainty in a QSAR prediction: quantitative, i.e. for regressions related to the error in a prediction and characterised by a predictive distribution; and qualitative, by expressing our confidence in the model for predicting a particular compound based on a quantitative measure of predictive reliability. It is possible to assess a quantitative (i.e. probabilistic) predictive distribution, given the supervised learning algorithm, the underlying QSAR data, a probability model for uncertainty and a statistical principle for inference. The integration of QSARs into risk assessment may be facilitated by the inclusion of the assessment of predictive error and predictive reliability into the "unambiguous algorithm", as outlined in the second OECD principle.

  12. Ligand Biological Activity Predictions Using Fingerprint-Based Artificial Neural Networks (FANN-QSAR)

    PubMed Central

    Myint, Kyaw Z.; Xie, Xiang-Qun

    2015-01-01

    This chapter focuses on the fingerprint-based artificial neural networks QSAR (FANN-QSAR) approach to predict biological activities of structurally diverse compounds. Three types of fingerprints, namely ECFP6, FP2, and MACCS, were used as inputs to train the FANN-QSAR models. The results were benchmarked against known 2D and 3D QSAR methods, and the derived models were used to predict cannabinoid (CB) ligand binding activities as a case study. In addition, the FANN-QSAR model was used as a virtual screening tool to search a large NCI compound database for lead cannabinoid compounds. We discovered several compounds with good CB2 binding affinities ranging from 6.70 nM to 3.75 μM. The studies proved that the FANN-QSAR method is a useful approach to predict bioactivities or properties of ligands and to find novel lead compounds for drug discovery research. PMID:25502380

  13. Pharmacophore modeling and three-dimensional database searching for drug design using catalyst.

    PubMed

    Kurogi, Y; Güner, O F

    2001-07-01

    Perceiving a pharmacophore is the first essential step towards understanding the interaction between a receptor and a ligand. Once a pharmacophore is established, a beneficial use of it is 3D database searching to retrieve novel compounds that would match the pharmacophore, without necessarily duplicating the topological features of known active compounds (hence remain independent of existing patents). As the 3D searching technology has evolved over the years, it has been effectively used for lead optimization, combinatorial library focusing, as well as virtual high-throughput screening. Clearly established as one of the successful computational tools in rational drug design, we present in this review article a brief history of the evolution of this technology and detailed algorithms of Catalyst, the latest 3D searching software to be released. We also provide brief summary of published successes with this technology, including two recent patent applications.

  14. The Use of Qsar and Computational Methods in Drug Design

    NASA Astrophysics Data System (ADS)

    Bajot, Fania

    The application of quantitative structure-activity relationships (QSARs) has significantly impacted the paradigm of drug discovery. Following the successful utilization of linear solvation free-energy relationships (LSERs), numerous 2D- and 3D-QSAR methods have been developed, most of them based on descriptors for hydrophobicity, polarizability, ionic interactions, and hydrogen bonding. QSAR models allow for the calculation of physicochemical properties (e.g., lipophilicity), the prediction of biological activity (or toxicity), as well as the evaluation of absorption, distribution, metabolism, and excretion (ADME). In pharmaceutical research, QSAR has a particular interest in the preclinical stages of drug discovery to replace tedious and costly experimentation, to filter large chemical databases, and to select drug candidates. However, to be part of drug discovery and development strategies, QSARs need to meet different criteria (e.g., sufficient predictivity). This chapter describes the foundation of modern QSAR in drug discovery and presents some current challenges and applications for the discovery and optimization of drug candidates

  15. Dual Binding Site and Selective Acetylcholinesterase Inhibitors Derived from Integrated Pharmacophore Models and Sequential Virtual Screening

    PubMed Central

    Gupta, Shikhar; Mohan, C. Gopi

    2014-01-01

    In this study, we have employed in silico methodology combining double pharmacophore based screening, molecular docking, and ADME/T filtering to identify dual binding site acetylcholinesterase inhibitors that can preferentially inhibit acetylcholinesterase and simultaneously inhibit the butyrylcholinesterase also but in the lesser extent than acetylcholinesterase. 3D-pharmacophore models of AChE and BuChE enzyme inhibitors have been developed from xanthostigmine derivatives through HypoGen and validated using test set, Fischer's randomization technique. The best acetylcholinesterase and butyrylcholinesterase inhibitors pharmacophore hypotheses Hypo1_A and Hypo1_B, with high correlation coefficient of 0.96 and 0.94, respectively, were used as 3D query for screening the Zinc database. The screened hits were then subjected to the ADME/T and molecular docking study to prioritise the compounds. Finally, 18 compounds were identified as potential leads against AChE enzyme, showing good predicted activities and promising ADME/T properties. PMID:25050335

  16. Investigation on Quantitative Structure Activity Relationships and Pharmacophore Modeling of a Series of mGluR2 Antagonists

    PubMed Central

    Zhang, Meng-Qi; Zhang, Xiao-Le; Li, Yan; Fan, Wen-Jia; Wang, Yong-Hua; Hao, Ming; Zhang, Shu-Wei; Ai, Chun-Zhi

    2011-01-01

    MGluR2 is G protein-coupled receptor that is targeted for diseases like anxiety, depression, Parkinson’s disease and schizophrenia. Herein, we report the three-dimensional quantitative structure–activity relationship (3D-QSAR) studies of a series of 1,3-dihydrobenzo[ b][1,4]diazepin-2-one derivatives as mGluR2 antagonists. Two series of models using two different activities of the antagonists against rat mGluR2, which has been shown to be very similar to the human mGluR2, (activity I: inhibition of [3H]-LY354740; activity II: mGluR2 (1S,3R)-ACPD inhibition of forskolin stimulated cAMP.) were derived from datasets composed of 137 and 69 molecules respectively. For activity I study, the best predictive model obtained from CoMFA analysis yielded a Q2 of 0.513, R2 ncv of 0.868, R2 pred = 0.876, while the CoMSIA model yielded a Q2 of 0.450, R2 ncv = 0.899, R2 pred = 0.735. For activity II study, CoMFA model yielded statistics of Q2 = 0.5, R2 ncv = 0.715, R2 pred = 0.723. These results prove the high predictability of the models. Furthermore, a combined analysis between the CoMFA, CoMSIA contour maps shows that: (1) Bulky substituents in R7, R3 and position A benefit activity I of the antagonists, but decrease it when projected in R8 and position B; (2) Hydrophilic groups at position A and B increase both antagonistic activity I and II; (3) Electrostatic field plays an essential rule in the variance of activity II. In search for more potent mGluR2 antagonists, two pharmacophore models were developed separately for the two activities. The first model reveals six pharmacophoric features, namely an aromatic center, two hydrophobic centers, an H-donor atom, an H-acceptor atom and an H-donor site. The second model shares all features of the first one and has an additional acceptor site, a positive N and an aromatic center. These models can be used as guidance for the development of new mGluR2 antagonists of high activity and selectivity. This work is the first report on 3

  17. A Novel Approach for Efficient Pharmacophore-based Virtual Screening: Method and Applications

    PubMed Central

    Dror, Oranit; Schneidman-Duhovny, Dina; Inbar, Yuval; Nussinov, Ruth; Wolfson, Haim J.

    2009-01-01

    Virtual screening is emerging as a productive and cost-effective technology in rational drug design for the identification of novel lead compounds. An important model for virtual screening is the pharmacophore. Pharmacophore is the spatial configuration of essential features that enable a ligand molecule to interact with a specific target receptor. In the absence of a known receptor structure, a pharmacophore can be identified from a set of ligands that have been observed to interact with the target receptor. Here, we present a novel computational method for pharmacophore detection and virtual screening. The pharmacophore detection module is able to: (i) align multiple flexible ligands in a deterministic manner without exhaustive enumeration of the conformational space, (ii) detect subsets of input ligands that may bind to different binding sites or have different binding modes, (iii) address cases where the input ligands have different affinities by defining weighted pharmacophores based on the number of ligands that share them, and (iv) automatically select the most appropriate pharmacophore candidates for virtual screening. The algorithm is highly efficient, allowing a fast exploration of the chemical space by virtual screening of huge compound databases. The performance of PharmaGist was successfully evaluated on a commonly used dataset of G-Protein Coupled Receptor alpha1A. Additionally, a large-scale evaluation using the DUD (directory of useful decoys) dataset was performed. DUD contains 2950 active ligands for 40 different receptors, with 36 decoy compounds for each active ligand. PharmaGist enrichment rates are comparable with other state-of-the-art tools for virtual screening. Availability The software is available for download. A user-friendly web interface for pharmacophore detection is available at http://bioinfo3d.cs.tau.ac.il/PharmaGist. PMID:19803502

  18. QSAR modeling of in vitro inhibition of cytochrome P450 3A4.

    PubMed

    Mao, Boryeu; Gozalbes, Rafael; Barbosa, Frédérique; Migeon, Jacques; Merrick, Sandra; Kamm, Kelly; Wong, Eric; Costales, Chester; Shi, Wei; Wu, Cheryl; Froloff, Nicolas

    2006-01-01

    We report the QSAR modeling of cytochrome P450 3A4 (CYP3A4) enzyme inhibition using four large data sets of in vitro data. These data sets consist of marketed drugs and drug-like compounds all tested in four assays measuring the inhibition of the metabolism of four different substrates by the CYP3A4 enzyme. The four probe substrates are benzyloxycoumarin, testosterone, benzyloxyresorufin, and midazolam. We first show that using state-of-the-art QSAR modeling approaches applied to only one of these four data sets does not lead to predictive models that would be useful for in silico filtering of chemical libraries. We then present the development and the testing of a multiple pharmacophore hypothesis (MPH) that is formulated as a conceptual extension of the traditional QSAR approach to modeling the promiscuous binding of a large variety of drugs to CYP3A4. In the simplest form, the MPH approach takes advantage of the multiple substrate data sets and identifies the binding of test compounds as either proximal or distal relative to that of a given substrate. Application of the approach to the in silico filtering of test compounds for potential inhibitors of CYP3A4 is also presented. In addition to an improvement in the QSAR modeling for the inhibition of CYP3A4, the results from this modeling approach provide structural insights into the drug-enzyme interactions. The existence of multiple inhibition data sets in the BioPrint database motivates the original development of the concept of a multiple pharmacophore hypothesis and provides a unique opportunity for formulating alternative strategies of QSAR modeling of the inhibition of the in vitro metabolism of CYP3A4.

  19. Common pharmacophore identification using frequent clique detection algorithm.

    PubMed

    Podolyan, Yevgeniy; Karypis, George

    2009-01-01

    The knowledge of a pharmacophore, or the 3D arrangement of features in the biologically active molecule that is responsible for its pharmacological activity, can help in the search and design of a new or better drug acting upon the same or related target. In this paper, we describe two new algorithms based on the frequent clique detection in the molecular graphs. The first algorithm mines all frequent cliques that are present in at least one of the conformers of each (or a portion of all) molecules. The second algorithm exploits the similarities among the different conformers of the same molecule and achieves an order of magnitude performance speedup compared to the first algorithm. Both algorithms are guaranteed to find all common pharmacophores in the data set, which is confirmed by the validation on the set of molecules for which pharmacophores have been determined experimentally. In addition, these algorithms are able to scale to data sets with arbitrarily large number of conformers per molecule and identify multiple ligand binding modes or multiple binding sites of the target.

  20. Common Pharmacophore Identification Using Frequent Clique Detection Algorithm

    PubMed Central

    Podolyan, Yevgeniy; Karypis, George

    2008-01-01

    The knowledge of a pharmacophore, or the 3D arrangement of features in the biologically active molecule that is responsible for its pharmacological activity, can help in the search and design of a new or better drug acting upon the same or related target. In this paper we describe two new algorithms based on the frequent clique detection in the molecular graphs. The first algorithm mines all frequent cliques that are present in at least one of the conformers of each (or a portion of all) molecules. The second algorithm exploits the similarities among the different conformers of the same molecule and achieves an order of magnitude performance speedup compared to the first algorithm. Both algorithms are guaranteed to find all common pharmacophores in the dataset, which is confirmed by the validation on the set of molecules for which pharmacophores have been determined experimentally. In addition, these algorithms are able to scale to datasets with arbitrarily large number of conformers per molecule and identify multiple ligand binding modes or multiple binding sites of the target. PMID:19072298

  1. Europeana and 3D

    NASA Astrophysics Data System (ADS)

    Pletinckx, D.

    2011-09-01

    The current 3D hype creates a lot of interest in 3D. People go to 3D movies, but are we ready to use 3D in our homes, in our offices, in our communication? Are we ready to deliver real 3D to a general public and use interactive 3D in a meaningful way to enjoy, learn, communicate? The CARARE project is realising this for the moment in the domain of monuments and archaeology, so that real 3D of archaeological sites and European monuments will be available to the general public by 2012. There are several aspects to this endeavour. First of all is the technical aspect of flawlessly delivering 3D content over all platforms and operating systems, without installing software. We have currently a working solution in PDF, but HTML5 will probably be the future. Secondly, there is still little knowledge on how to create 3D learning objects, 3D tourist information or 3D scholarly communication. We are still in a prototype phase when it comes to integrate 3D objects in physical or virtual museums. Nevertheless, Europeana has a tremendous potential as a multi-facetted virtual museum. Finally, 3D has a large potential to act as a hub of information, linking to related 2D imagery, texts, video, sound. We describe how to create such rich, explorable 3D objects that can be used intuitively by the generic Europeana user and what metadata is needed to support the semantic linking.

  2. 3d-3d correspondence revisited

    DOE PAGES

    Chung, Hee -Joong; Dimofte, Tudor; Gukov, Sergei; ...

    2016-04-21

    In fivebrane compactifications on 3-manifolds, we point out the importance of all flat connections in the proper definition of the effective 3d N = 2 theory. The Lagrangians of some theories with the desired properties can be constructed with the help of homological knot invariants that categorify colored Jones polynomials. Higgsing the full 3d theories constructed this way recovers theories found previously by Dimofte-Gaiotto-Gukov. As a result, we also consider the cutting and gluing of 3-manifolds along smooth boundaries and the role played by all flat connections in this operation.

  3. QSAR analyses of organophosphates for insecticidal activity and its in-silico validation using molecular docking study.

    PubMed

    Niraj, Ravi Ranjan Kumar; Saini, Vandana; Kumar, Ajit

    2015-11-01

    The present work was carried out to design and develop novel QSAR models using 2D-QSAR and 3D-QSAR with CoMFA methodology for prediction of insecticidal activity of organophosphate (OP) molecules. The models were validated on an entirely different external dataset of in-house generated combinatorial library of OPs, by completely different computational approach of molecular docking against the target AChE protein of Musca domestica. The dock scores were observed to be in good correlation with 2D-QSAR and 3D-QSAR with CoMFA predicted activities and had the correlation coefficients (r(2)) of -0.62 and -0.63, respectively. The activities predicted by 2D-QSAR and 3D-QSAR with CoMFA were also observed to be highly correlated with r(2)=0.82. Also, the combinatorial library molecules were screened for toxicity in non-target organisms and degradability using USEPA-EPI Suite. The work was first step towards computer aided design and development of novel OP pesticide candidates with good insecticidal property but lower toxicity in non-targeted organisms and having biodegradation potential.

  4. Pharmacophore and Virtual Screening of JAK3 inhibitors.

    PubMed

    Rajeswari, Murugesan; Santhi, Natchimuthu; Bhuvaneswari, Vembu

    2014-01-01

    Janus kinase 3 (JAK3) is a non-receptor tyrosine kinases family of protein which is comprised of JAK1, JAK2, JAK3 and TYK2. It plays an important role in immune function and lymphoid development and it only resides in the hematopoietic system. Therefore, selective targeting JAK3 is a rational approach in developing new therapeutic molecule. In this study, about 116 JAK3 inhibitors were collected from the literature and were used to build four-point pharmacophore model using Phase (Schrodinger module). The statistically significant pharmacophore hypothesis of AAHR.92 with r2 value of 0.942 was used as 3D query to search against 3D database namely Zincpharmer. A total of 2, 27,483 compounds obtained as hit were subjected to high throughput virtual screening (HTVS module of Schrodinger). Among the hits, ten compounds with good G-score ranging from -12.96 to -11.18 with good binding energy to JAK3 were identified.

  5. Virtual Lead Identification of Farnesyltransferase Inhibitors Based on Ligand and Structure-Based Pharmacophore Techniques

    PubMed Central

    Al-Balas, Qosay A.; Amawi, Haneen A.; Hassan, Mohammad A.; Qandil, Amjad M.; Almaaytah, Ammar M.; Mhaidat, Nizar M.

    2013-01-01

    Farnesyltransferase enzyme (FTase) is considered an essential enzyme in the Ras signaling pathway associated with cancer. Thus, designing inhibitors for this enzyme might lead to the discovery of compounds with effective anticancer activity. In an attempt to obtain effective FTase inhibitors, pharmacophore hypotheses were generated using structure-based and ligand-based approaches built in Discovery Studio v3.1. Knowing the presence of the zinc feature is essential for inhibitor’s binding to the active site of FTase enzyme; further customization was applied to include this feature in the generated pharmacophore hypotheses. These pharmacophore hypotheses were thoroughly validated using various procedures such as ROC analysis and ligand pharmacophore mapping. The validated pharmacophore hypotheses were used to screen 3D databases to identify possible hits. Those which were both high ranked and showed sufficient ability to bind the zinc feature in active site, were further refined by applying drug-like criteria such as Lipiniski’s “rule of five” and ADMET filters. Finally, the two candidate compounds (ZINC39323901 and ZINC01034774) were allowed to dock using CDOCKER and GOLD in the active site of FTase enzyme to optimize hit selection. PMID:24276257

  6. 3D and Education

    NASA Astrophysics Data System (ADS)

    Meulien Ohlmann, Odile

    2013-02-01

    Today the industry offers a chain of 3D products. Learning to "read" and to "create in 3D" becomes an issue of education of primary importance. 25 years professional experience in France, the United States and Germany, Odile Meulien set up a personal method of initiation to 3D creation that entails the spatial/temporal experience of the holographic visual. She will present some different tools and techniques used for this learning, their advantages and disadvantages, programs and issues of educational policies, constraints and expectations related to the development of new techniques for 3D imaging. Although the creation of display holograms is very much reduced compared to the creation of the 90ies, the holographic concept is spreading in all scientific, social, and artistic activities of our present time. She will also raise many questions: What means 3D? Is it communication? Is it perception? How the seeing and none seeing is interferes? What else has to be taken in consideration to communicate in 3D? How to handle the non visible relations of moving objects with subjects? Does this transform our model of exchange with others? What kind of interaction this has with our everyday life? Then come more practical questions: How to learn creating 3D visualization, to learn 3D grammar, 3D language, 3D thinking? What for? At what level? In which matter? for whom?

  7. QSAR study and VolSurf characterization of anti-HIV quinolone library

    NASA Astrophysics Data System (ADS)

    Filipponi, Enrica; Cruciani, Gabriele; Tabarrini, Oriana; Cecchetti, Violetta; Fravolini, Arnaldo

    2001-03-01

    Antiviral quinolones are promising compounds in the search for new therapeutically effective agents for the treatment of AIDS. To rationalize the SAR for this new interesting class of anti-HIV derivatives, we performed a 3D-QSAR study on a library of 101 6-fluoro and 6-desfluoroquinolones, taken either from the literature or synthesized by us. The chemometric procedure involved a fully semiempirical minimization of the molecular structures by the AMSOL program, which takes into account the solvatation effect, and their 3D characterization by the VolSurf/GRID program. The QSAR analysis, based on PCA and PLS methods, shows the key structural features responsible for the antiviral activity.

  8. 3D Imaging.

    ERIC Educational Resources Information Center

    Hastings, S. K.

    2002-01-01

    Discusses 3 D imaging as it relates to digital representations in virtual library collections. Highlights include X-ray computed tomography (X-ray CT); the National Science Foundation (NSF) Digital Library Initiatives; output peripherals; image retrieval systems, including metadata; and applications of 3 D imaging for libraries and museums. (LRW)

  9. TOXICO-CHEMINFORMATICS AND QSAR MODELING OF ...

    EPA Pesticide Factsheets

    This abstract concludes that QSAR approaches combined with toxico-chemoinformatics descriptors can enhance predictive toxicology models. This abstract concludes that QSAR approaches combined with toxico-chemoinformatics descriptors can enhance predictive toxicology models.

  10. AE3D

    SciTech Connect

    Spong, Donald A

    2016-06-20

    AE3D solves for the shear Alfven eigenmodes and eigenfrequencies in a torodal magnetic fusion confinement device. The configuration can be either 2D (e.g. tokamak, reversed field pinch) or 3D (e.g. stellarator, helical reversed field pinch, tokamak with ripple). The equations solved are based on a reduced MHD model and sound wave coupling effects are not currently included.

  11. A fast new approach to pharmacophore mapping and its application to dopaminergic and benzodiazepine agonists

    NASA Astrophysics Data System (ADS)

    Martin, Yvonne C.; Bures, Mark G.; Danaher, Elizabeth A.; DeLazzer, Jerry; Lico, Isabella; Pavlik, Patricia A.

    1993-02-01

    In the absence of a 3D structure of the target biomolecule, to propose the 3D requirements for a small molecule to exhibit a particular bioactivity, one must supply both a bioactive conformation and a superposition rule for every active compound. Our strategy identifies both simultaneously. We first generate and optimize all low-energy conformations by any suitable method. For each conformation we then use ALAD-DIN to calculate the location of points to be considered as part of the superposition. These points include atoms in the molecule and projections from the molecule to hydrogen-bond donors and acceptors or charged groups in the binding site. These positions and the relative energy of each conformation are the input to our new program DISCO. It uses a clique-detection method to find superpositions that contain a least one conformation of each molecule and user-specified numbers of point types and chirality. DISCO is fast; for example, it takes about 1 min CPU to propose pharmacophores from 21 conformations of seven molecules. We typically run DISCO several times to compare alternative pharmacophore maps. For D2 dopamine agonists DISCO shows that the newer 2-aminothiazoles fit the traditional pharmacophore. Using site points correctly identifies the bioactive enantiomers of indoles to compare with catechols whereas using only ligand points leads to selecting the inactive enantiomer for the pharmacophore map. In addition, DISCO reproduces pharmacophore maps of benzodiazepines in the literature and proposes subtle improvements. Our experience suggests that clique-detection methods will find many applications in computational chemistry and computer-assisted molecular design.

  12. Atomic softness-based QSAR study of testosterone

    NASA Astrophysics Data System (ADS)

    Srivastava, H. K.; Pasha, F. A.; Singh, P. P.

    Ionization potential of an atom in a molecule, electron affinity of an atom in a molecule, and quantum chemical descriptor atomic softness values En‡-based quantitative structure-activity relationship (QSAR) study of testosterone derivatives have been done with the help of PM3 calculations on WinMOPAC 7.21 software. The 3D modeling and geometry optimization of all the compounds have been done with the help of PCMODEL software. The biological activities of testosterone derivatives have been taken from literature. The predicted values of biological activity with the help of multiple linear regression (MLR) analysis is very close to observed biological activity. The cross-validation coefficient and correlation coefficient also indicate that the QSAR model is valuable. Regression analysis shows a very good relationship with biological activity and En‡ values. With the help of these values, prediction of the biological activity of any unknown compound is possible.

  13. 3-D Seismic Interpretation

    NASA Astrophysics Data System (ADS)

    Moore, Gregory F.

    2009-05-01

    This volume is a brief introduction aimed at those who wish to gain a basic and relatively quick understanding of the interpretation of three-dimensional (3-D) seismic reflection data. The book is well written, clearly illustrated, and easy to follow. Enough elementary mathematics are presented for a basic understanding of seismic methods, but more complex mathematical derivations are avoided. References are listed for readers interested in more advanced explanations. After a brief introduction, the book logically begins with a succinct chapter on modern 3-D seismic data acquisition and processing. Standard 3-D acquisition methods are presented, and an appendix expands on more recent acquisition techniques, such as multiple-azimuth and wide-azimuth acquisition. Although this chapter covers the basics of standard time processing quite well, there is only a single sentence about prestack depth imaging, and anisotropic processing is not mentioned at all, even though both techniques are now becoming standard.

  14. Radiochromic 3D Detectors

    NASA Astrophysics Data System (ADS)

    Oldham, Mark

    2015-01-01

    Radiochromic materials exhibit a colour change when exposed to ionising radiation. Radiochromic film has been used for clinical dosimetry for many years and increasingly so recently, as films of higher sensitivities have become available. The two principle advantages of radiochromic dosimetry include greater tissue equivalence (radiologically) and the lack of requirement for development of the colour change. In a radiochromic material, the colour change arises direct from ionising interactions affecting dye molecules, without requiring any latent chemical, optical or thermal development, with important implications for increased accuracy and convenience. It is only relatively recently however, that 3D radiochromic dosimetry has become possible. In this article we review recent developments and the current state-of-the-art of 3D radiochromic dosimetry, and the potential for a more comprehensive solution for the verification of complex radiation therapy treatments, and 3D dose measurement in general.

  15. Bootstrapping 3D fermions

    DOE PAGES

    Iliesiu, Luca; Kos, Filip; Poland, David; ...

    2016-03-17

    We study the conformal bootstrap for a 4-point function of fermions <ψψψψ> in 3D. We first introduce an embedding formalism for 3D spinors and compute the conformal blocks appearing in fermion 4-point functions. Using these results, we find general bounds on the dimensions of operators appearing in the ψ × ψ OPE, and also on the central charge CT. We observe features in our bounds that coincide with scaling dimensions in the GrossNeveu models at large N. Finally, we also speculate that other features could coincide with a fermionic CFT containing no relevant scalar operators.

  16. Bootstrapping 3D fermions

    SciTech Connect

    Iliesiu, Luca; Kos, Filip; Poland, David; Pufu, Silviu S.; Simmons-Duffin, David; Yacoby, Ran

    2016-03-17

    We study the conformal bootstrap for a 4-point function of fermions <ψψψψ> in 3D. We first introduce an embedding formalism for 3D spinors and compute the conformal blocks appearing in fermion 4-point functions. Using these results, we find general bounds on the dimensions of operators appearing in the ψ × ψ OPE, and also on the central charge CT. We observe features in our bounds that coincide with scaling dimensions in the GrossNeveu models at large N. Finally, we also speculate that other features could coincide with a fermionic CFT containing no relevant scalar operators.

  17. A specific pharmacophore model of sodium-dependent glucose co-transporter 2 (SGLT2) inhibitors.

    PubMed

    Tang, Chunlei; Zhu, Xiaoyun; Huang, Dandan; Zan, Xin; Yang, Baowei; Li, Ying; Du, Xiaoyong; Qian, Hai; Huang, Wenlong

    2012-06-01

    Sodium-dependent glucose co-transporter 2 (SGLT2) plays a pivotal role in maintaining glucose equilibrium in the human body, emerging as one of the most promising targets for the treatment of diabetes mellitus type 2. Pharmacophore models of SGLT2 inhibitors have been generated with a training set of 25 SGLT2 inhibitors using Discovery Studio V2.1. The best hypothesis (Hypo1(SGLT2)) contains one hydrogen bond donor, five excluded volumes, one ring aromatic and three hydrophobic features, and has a correlation coefficient of 0.955, cost difference of 68.76, RMSD of 0.85. This model was validated by test set, Fischer randomization test and decoy set methods. The specificity of Hypo1(SGLT2) was evaluated. The pharmacophore features of Hypo1(SGLT2) were different from the best pharmacophore model (Hypo1(SGLT1)) of SGLT1 inhibitors we developed. Moreover, Hypo1(SGLT2) could effectively distinguish selective inhibitors of SGLT2 from those of SGLT1. These results indicate that a highly predictive and specific pharmacophore model of SGLT2 inhibitors has been successfully obtained. Then Hypo1(SGLT2) was used as a 3D query to screen databases including NCI and Maybridge for identifying new inhibitors of SGLT2. The hit compounds were subsequently subjected to filtering by Lipinski's rule of five. And several compounds selected from the top ranked hits have been suggested for further experimental assay studies.

  18. PharmaGist: a webserver for ligand-based pharmacophore detection

    PubMed Central

    Schneidman-Duhovny, Dina; Dror, Oranit; Inbar, Yuval; Nussinov, Ruth; Wolfson, Haim J.

    2008-01-01

    Predicting molecular interactions is a major goal in rational drug design. Pharmacophore, which is the spatial arrangement of features that is essential for a molecule to interact with a specific target receptor, is an important model for achieving this goal. We present a freely available web server, named PharmaGist, for pharmacophore detection. The employed method is ligand based. Namely, it does not require the structure of the target receptor. Instead, the input is a set of structures of drug-like molecules that are known to bind to the receptor. The output consists of candidate pharmacophores that are computed by multiple flexible alignment of the input ligands. The method handles the flexibility of the input ligands explicitly and in deterministic manner within the alignment process. PharmaGist is also highly efficient, where a typical run with up to 32 drug-like molecules takes seconds to a few minutes on a stardard PC. Another important characteristic is the capability of detecting pharmacophores shared by different subsets of input molecules. This capability is a key advantage when the ligands belong to different binding modes or when the input contains outliers. The webserver has a user-friendly interface available at http://bioinfo3d.cs.tau.ac.il/PharmaGist. PMID:18424800

  19. Venus in 3D

    NASA Technical Reports Server (NTRS)

    Plaut, Jeffrey J.

    1993-01-01

    Stereographic images of the surface of Venus which enable geologists to reconstruct the details of the planet's evolution are discussed. The 120-meter resolution of these 3D images make it possible to construct digital topographic maps from which precise measurements can be made of the heights, depths, slopes, and volumes of geologic structures.

  20. 3D photoacoustic imaging

    NASA Astrophysics Data System (ADS)

    Carson, Jeffrey J. L.; Roumeliotis, Michael; Chaudhary, Govind; Stodilka, Robert Z.; Anastasio, Mark A.

    2010-06-01

    Our group has concentrated on development of a 3D photoacoustic imaging system for biomedical imaging research. The technology employs a sparse parallel detection scheme and specialized reconstruction software to obtain 3D optical images using a single laser pulse. With the technology we have been able to capture 3D movies of translating point targets and rotating line targets. The current limitation of our 3D photoacoustic imaging approach is its inability ability to reconstruct complex objects in the field of view. This is primarily due to the relatively small number of projections used to reconstruct objects. However, in many photoacoustic imaging situations, only a few objects may be present in the field of view and these objects may have very high contrast compared to background. That is, the objects have sparse properties. Therefore, our work had two objectives: (i) to utilize mathematical tools to evaluate 3D photoacoustic imaging performance, and (ii) to test image reconstruction algorithms that prefer sparseness in the reconstructed images. Our approach was to utilize singular value decomposition techniques to study the imaging operator of the system and evaluate the complexity of objects that could potentially be reconstructed. We also compared the performance of two image reconstruction algorithms (algebraic reconstruction and l1-norm techniques) at reconstructing objects of increasing sparseness. We observed that for a 15-element detection scheme, the number of measureable singular vectors representative of the imaging operator was consistent with the demonstrated ability to reconstruct point and line targets in the field of view. We also observed that the l1-norm reconstruction technique, which is known to prefer sparseness in reconstructed images, was superior to the algebraic reconstruction technique. Based on these findings, we concluded (i) that singular value decomposition of the imaging operator provides valuable insight into the capabilities of

  1. Lead generation using pharmacophore mapping and three-dimensional database searching: application to muscarinic M(3) receptor antagonists.

    PubMed

    Marriott, D P; Dougall, I G; Meghani, P; Liu, Y J; Flower, D R

    1999-08-26

    By using a pharmacophore model, a geometrical representation of the features necessary for molecules to show a particular biological activity, it is possible to search databases containing the 3D structures of molecules and identify novel compounds which may possess this activity. We describe our experiences of establishing a working 3D database system and its use in rational drug design. By using muscarinic M(3) receptor antagonists as an example, we show that it is possible to identify potent novel lead compounds using this approach. Pharmacophore generation based on the structures of known M(3) receptor antagonists, 3D database searching, and medium-throughput screening were used to identify candidate compounds. Three compounds were chosen to define the pharmacophore: a lung-selective M(3) antagonist patented by Pfizer and two Astra compounds which show affinity at the M(3) receptor. From these, a pharmacophore model was generated, using the program DISCO, and this was used subsequently to search a UNITY 3D database of proprietary compounds; 172 compounds were found to fit the pharmacophore. These compounds were then screened, and 1-[2-(2-(diethylamino)ethoxy)phenyl]-2-phenylethanone (pA(2) 6.67) was identified as the best hit, with N-[2-(piperidin-1-ylmethyl)cycohexyl]-2-propoxybenz amide (pA(2) 4. 83) and phenylcarbamic acid 2-(morpholin-4-ylmethyl)cyclohexyl ester (pA(2) 5.54) demonstrating lower activity. As well as its potency, 1-[2-(2-(diethylamino)ethoxy)phenyl]-2-phenylethanone is a simple structure with limited similarity to existing M(3) receptor antagonists.

  2. Towards a Pharmacophore for Amyloid

    SciTech Connect

    Landau, Meytal; Sawaya, Michael R.; Faull, Kym F.; Laganowsky, Arthur; Jiang, Lin; Sievers, Stuart A.; Liu, Jie; Barrio, Jorge R.; Eisenberg, David

    2011-09-16

    may be required for future amyloid therapies. The structures described here start to define the amyloid pharmacophore, opening the way to structure-based design of improved diagnostics and therapeutics.

  3. Identification of Novel HIV 1- Protease Inhibitors: Application of Ligand and Structure Based Pharmacophore Mapping and Virtual Screening

    PubMed Central

    Yadav, Divya; Paliwal, Sarvesh; Yadav, Rakesh; Pal, Mahima; Pandey, Anubhuti

    2012-01-01

    A combined ligand and structure-based drug design approach provides a synergistic advantage over either methods performed individually. Present work bestows a good assembly of ligand and structure-based pharmacophore generation concept. Ligand-oriented study was accomplished by employing the HypoGen module of Catalyst in which we have translated the experimental findings into 3-D pharmacophore models by identifying key features (four point pharmacophore) necessary for interaction of the inhibitors with the active site of HIV-1 protease enzyme using a training set of 33 compounds belonging to the cyclic cyanoguanidines and cyclic urea derivatives. The most predictive pharmacophore model (hypothesis 1), consisting of four features, namely, two hydrogen bond acceptors and two hydrophobic, showed a correlation (r) of 0.90 and a root mean square of 0.71 and cost difference of 56.59 bits between null cost and fixed cost. The model was validated using CatScramble technique, internal and external test set prediction. In the second phase of our study, a structure-based five feature pharmacophore hypothesis was generated which signifies the importance of hydrogen bond donor, hydrogen bond acceptors and hydrophobic interaction between the HIV-1 protease enzyme and its inhibitors. This work has taken a significant step towards the full integration of ligand and structure-based drug design methodologies as pharmacophoric features retrieved from structure-based strategy complemented the features from ligand-based study hence proving the accuracy of the developed models. The ligand-based pharmacophore model was used in virtual screening of Maybridge and NCI compound database resulting in the identification of four structurally diverse druggable compounds with nM activities. PMID:23145032

  4. Synthesis and antiplasmodial activity of novel indoleamide derivatives bearing sulfonamide and triazole pharmacophores.

    PubMed

    Devender, N; Gunjan, Sarika; Tripathi, Renu; Tripathi, Rama Pati

    2017-05-05

    Due to the recent reports of growing parasite resistance to artemisinins and other antimalarial drugs, development of new antimalarial chemotypes is an urgent priority. Here in, we report a novel series of adamantyl/cycloheptyl indoleamide derivatives bearing sulfonamide and triazole pharmacophores adopting different chemical modifications and evaluated them for antiplasmodial activity in vitro. Among all the indoleamides, compounds 22, 24, 26 and 30 with sulfonamide pharmacophore showed promising activity with IC50 of 1.87, 1.93, 2.00, 2.17 μM against CQ sensitive Pf3D7 strain and 1.69, 2.12, 1.60, 2.19 μM against CQ resistant PfK1 strain, respectively.

  5. Twin Peaks - 3D

    NASA Technical Reports Server (NTRS)

    1997-01-01

    The two hills in the distance, approximately one to two kilometers away, have been dubbed the 'Twin Peaks' and are of great interest to Pathfinder scientists as objects of future study. 3D glasses are necessary to identify surface detail. The white areas on the left hill, called the 'Ski Run' by scientists, may have been formed by hydrologic processes.

    The IMP is a stereo imaging system with color capability provided by 24 selectable filters -- twelve filters per 'eye.

    Click below to see the left and right views individually. [figure removed for brevity, see original site] Left [figure removed for brevity, see original site] Right

  6. 3D and beyond

    NASA Astrophysics Data System (ADS)

    Fung, Y. C.

    1995-05-01

    This conference on physiology and function covers a wide range of subjects, including the vasculature and blood flow, the flow of gas, water, and blood in the lung, the neurological structure and function, the modeling, and the motion and mechanics of organs. Many technologies are discussed. I believe that the list would include a robotic photographer, to hold the optical equipment in a precisely controlled way to obtain the images for the user. Why are 3D images needed? They are to achieve certain objectives through measurements of some objects. For example, in order to improve performance in sports or beauty of a person, we measure the form, dimensions, appearance, and movements.

  7. 3D Audio System

    NASA Technical Reports Server (NTRS)

    1992-01-01

    Ames Research Center research into virtual reality led to the development of the Convolvotron, a high speed digital audio processing system that delivers three-dimensional sound over headphones. It consists of a two-card set designed for use with a personal computer. The Convolvotron's primary application is presentation of 3D audio signals over headphones. Four independent sound sources are filtered with large time-varying filters that compensate for motion. The perceived location of the sound remains constant. Possible applications are in air traffic control towers or airplane cockpits, hearing and perception research and virtual reality development.

  8. 3D Surgical Simulation

    PubMed Central

    Cevidanes, Lucia; Tucker, Scott; Styner, Martin; Kim, Hyungmin; Chapuis, Jonas; Reyes, Mauricio; Proffit, William; Turvey, Timothy; Jaskolka, Michael

    2009-01-01

    This paper discusses the development of methods for computer-aided jaw surgery. Computer-aided jaw surgery allows us to incorporate the high level of precision necessary for transferring virtual plans into the operating room. We also present a complete computer-aided surgery (CAS) system developed in close collaboration with surgeons. Surgery planning and simulation include construction of 3D surface models from Cone-beam CT (CBCT), dynamic cephalometry, semi-automatic mirroring, interactive cutting of bone and bony segment repositioning. A virtual setup can be used to manufacture positioning splints for intra-operative guidance. The system provides further intra-operative assistance with the help of a computer display showing jaw positions and 3D positioning guides updated in real-time during the surgical procedure. The CAS system aids in dealing with complex cases with benefits for the patient, with surgical practice, and for orthodontic finishing. Advanced software tools for diagnosis and treatment planning allow preparation of detailed operative plans, osteotomy repositioning, bone reconstructions, surgical resident training and assessing the difficulties of the surgical procedures prior to the surgery. CAS has the potential to make the elaboration of the surgical plan a more flexible process, increase the level of detail and accuracy of the plan, yield higher operative precision and control, and enhance documentation of cases. Supported by NIDCR DE017727, and DE018962 PMID:20816308

  9. Martian terrain - 3D

    NASA Technical Reports Server (NTRS)

    1997-01-01

    An area of rocky terrain near the landing site of the Sagan Memorial Station can be seen in this image, taken in stereo by the Imager for Mars Pathfinder (IMP) on Sol 3. 3D glasses are necessary to identify surface detail. This image is part of a 3D 'monster' panorama of the area surrounding the landing site.

    Mars Pathfinder is the second in NASA's Discovery program of low-cost spacecraft with highly focused science goals. The Jet Propulsion Laboratory, Pasadena, CA, developed and manages the Mars Pathfinder mission for NASA's Office of Space Science, Washington, D.C. JPL is an operating division of the California Institute of Technology (Caltech). The Imager for Mars Pathfinder (IMP) was developed by the University of Arizona Lunar and Planetary Laboratory under contract to JPL. Peter Smith is the Principal Investigator.

    Click below to see the left and right views individually. [figure removed for brevity, see original site] Left [figure removed for brevity, see original site] Right

  10. QSARs in Netherlands water quality management policies.

    PubMed

    van der Gaag, M A

    1991-12-01

    QSARs are a useful tool for predicting the potential toxic effects of compounds for which no data are available. Within strictly defined limits, QSARs can be applied to assess the potential impact of a spill, to evaluate ecotoxicological effects and environmental fate of organics in waste water and to set priorities for water quality criteria. For a wider application, there is a need for 'worst case' SARs providing a 'safer' estimate of toxicity than QSARs with an optimum fit, which might underestimate toxicity.

  11. 3D field harmonics

    SciTech Connect

    Caspi, S.; Helm, M.; Laslett, L.J.

    1991-03-30

    We have developed an harmonic representation for the three dimensional field components within the windings of accelerator magnets. The form by which the field is presented is suitable for interfacing with other codes that make use of the 3D field components (particle tracking and stability). The field components can be calculated with high precision and reduced cup time at any location (r,{theta},z) inside the magnet bore. The same conductor geometry which is used to simulate line currents is also used in CAD with modifications more readily available. It is our hope that the format used here for magnetic fields can be used not only as a means of delivering fields but also as a way by which beam dynamics can suggest correction to the conductor geometry. 5 refs., 70 figs.

  12. QSAR of Tryptanthrin Analogs via Tunneling Barrier Height Imaging

    NASA Astrophysics Data System (ADS)

    Sriraman, Krishnan

    A new class of potential therapeutic agents, namely indolo[2,1-b]quinazolin-6,12- dione (tryptanthrin), and its analogues, have generated interest due to their broad spectrum of activity against a variety of pathogenic organisms. Little is known about the mechanism of action of tryptanthrins at the cellular and molecular levels. One method that has been employed to understand mechanisms of action and predict biological activities is quantitative structure activity relationship (QSAR). Since previous tryptanthrin studies could not clearly identify the pharmacophore, it was proposed to measure barrier height (BH) energy values for preparing a QSAR vs. IC50 values from the literature. The BH energy values were measured using barrier height spectroscopy which is performed using a scanning tunneling microscope (STM). Topography images (7 x 7 nm size) for tryptanthrin and three of its analogs namely 8-fluorotryptanthrin, 4-aza-8-fluorotryptanthrin, and 4-aza-8-chlorotryptanthrin were collected. Both HOMO and LUMO were collected at an applied bias of +/- 0.8 V and 0.1 nA. Excellent positive bias images (LUMO) of tryptanthrin were collected in which individual molecules and their lobes could be clearly recognized. A comparison with the density functional theory (DFT) calculated image of the LUMO resulted in an excellent match. An interesting outcome of the tryptanthrin LUMO imaging was the arrangement of molecules (parallel alignments) in the image which was explained by considering the intermolecular forces. Excellent BH images with sub-molecular resolution for 4-aza-8-fluorotryptanthrin were observed. BH values were calculated for each of the various lobes in the molecule from the BH image. Preliminary QSAR training sets were constructed using literature values of IC50 for W-2 and D-6 strains of Plasmodium falciparum as well as Leishmanai donovani versus average measured molecular barrier heights. The correlations were found to be fair for all the three pathogens. The

  13. Pharmacophore modeling and conformational analysis in the gas phase and in aqueous solution of regioisomeric melatonin analogs. A theoretical and experimental study

    NASA Astrophysics Data System (ADS)

    Mendoza-Figueroa, Humberto; Martínez-Gudiño, Gelacio; Villanueva-Luna, Jorge E.; Trujillo-Serrato, Joel J.; Morales-Ríos, Martha S.

    2017-04-01

    In this work, 2-(N-acylaminoalkyl)indoles 1a-1d, that incorporate a pMeOBn group at the 3-position of the indole ring were virtual screened as potential melatoninergic ligands by analog-based design study using pharmacophore modeling. Pharmacophore models for melatoninergic agonist and antagonist activity were developed in order to identify the molecular constraints that define the geometric relationship among chemical features in each model. The best hypothesis consisted of six features for agonists and eight features for antagonists. The models suggest that the agonists and antagonists can share the same 3D arrangement for the six common pharmacophoric elements identified: two hydrogen bond acceptors (HBA), one hydrogen bond donor (HBD), one hydrophobic area (H), and two aromatic rings (AR). The extra hydrofobic interaction might be used as criterion for identified the pharmacological antagonist profile. Based on the pharmacophore fit, it was found that structures 1c and 1d show a good structural overlay that meets the requirements for the antagonistic pharmacophore hypothesis. Molecular modeling studies using the PCM solvation model predicted that the most stable conformers of 1a-1d match the antagonist pharmacophore hypothesis in contrast to those in the gas phase. Structures 1a-1c were synthesized only but the activities were not tested.

  14. QSAR and molecular docking studies on oxindole derivatives as VEGFR-2 tyrosine kinase inhibitors.

    PubMed

    Kang, Cong-Min; Liu, Dong-Qing; Zhao, Xu-Hao; Dai, Ying-Jie; Cheng, Jia-Gao; Lv, Ying-Tao

    2016-01-01

    The three-dimensional quantitative structure-activity relationships (3D-QSAR) were established for 30 oxindole derivatives as vascular endothelial growth factor receptor-2 (VEGFR-2) tyrosine kinase inhibitors by using comparative molecular field analysis (CoMFA) and comparative similarity indices analysis comparative molecular similarity indices analysis (CoMSIA) techniques. With the CoMFA model, the cross-validated value (q(2)) was 0.777, the non-cross-validated value (R(2)) was 0.987, and the external cross-validated value ([Formula: see text]) was 0.72. And with the CoMSIA model, the corresponding q(2), R(2) and [Formula: see text] values were 0.710, 0.988 and 0.78, respectively. Docking studies were employed to bind the inhibitors into the active site to determine the probable binding conformation. The binding mode obtained by molecular docking was in good agreement with the 3D-QSAR results. Based on the QSAR models and the docking binding mode, a set of new VEGFR-2 tyrosine kinase inhibitors were designed, which showed excellent predicting inhibiting potencies. The result revealed that both QSAR models have good predictive capability to guide the design and structural modification of homologic compounds. It is also helpful for further research and development of new VEGFR-2 tyrosine kinase inhibitors.

  15. Pharmacophore modeling study based on known spleen tyrosine kinase inhibitors together with virtual screening for identifying novel inhibitors.

    PubMed

    Xie, Huan-Zhang; Li, Lin-Li; Ren, Ji-Xia; Zou, Jun; Yang, Li; Wei, Yu-Quan; Yang, Sheng-Yong

    2009-04-01

    In this investigation, chemical features based 3D pharmacophore models were developed based on the known inhibitors of Spleen tyrosine kinase (Syk) with the aid of hiphop and hyporefine modules within catalyst. The best quantitative pharmacophore model, Hypo1, was used as a 3D structural query for retrieving potential inhibitors from chemical databases including Specs, NCI, MayBridge, and Chinese Nature Product Database (CNPD). The hit compounds were subsequently subjected to filtering by Lipinski's rule of five and docking studies to refine the retrieved hits. Finally 30 compounds were selected from the top ranked hit compounds and conducted an in vitro kinase inhibitory assay. Six compounds showed a good inhibitory potency against Syk, which have been selected for further investigation.

  16. Structure-based approach to pharmacophore identification, in silico screening, and three-dimensional quantitative structure-activity relationship studies for inhibitors of Trypanosoma cruzi dihydrofolate reductase function

    SciTech Connect

    Schormann, N.; Senkovich, O.; Walker, K.; Wright, D.L.; Anderson, A.C.; Rosowsky, A.; Ananthan, S.; Shinkre, B.; Velu, S.; Chattopadhyay, D.

    2009-07-10

    We have employed a structure-based three-dimensional quantitative structure-activity relationship (3D-QSAR) approach to predict the biochemical activity for inhibitors of T. cruzi dihydrofolate reductase-thymidylate synthase (DHFR-TS). Crystal structures of complexes of the enzyme with eight different inhibitors of the DHFR activity together with the structure in the substrate-free state (DHFR domain) were used to validate and refine docking poses of ligands that constitute likely active conformations. Structural information from these complexes formed the basis for the structure-based alignment used as input for the QSAR study. Contrary to indirect ligand-based approaches the strategy described here employs a direct receptor-based approach. The goal is to generate a library of selective lead inhibitors for further development as antiparasitic agents. 3D-QSAR models were obtained for T. cruzi DHFR-TS (30 inhibitors in learning set) and human DHFR (36 inhibitors in learning set) that show a very good agreement between experimental and predicted enzyme inhibition data. For crossvalidation of the QSAR model(s), we have used the 10% leave-one-out method. The derived 3D-QSAR models were tested against a few selected compounds (a small test set of six inhibitors for each enzyme) with known activity, which were not part of the learning set, and the quality of prediction of the initial 3D-QSAR models demonstrated that such studies are feasible. Further refinement of the models through integration of additional activity data and optimization of reliable docking poses is expected to lead to an improved predictive ability.

  17. Structure-based approach to pharmacophore identification, in silico screening, and three-dimensional quantitative structure-activity relationship studies for inhibitors of Trypanosoma cruzi dihydrofolate reductase function.

    PubMed

    Schormann, N; Senkovich, O; Walker, K; Wright, D L; Anderson, A C; Rosowsky, A; Ananthan, S; Shinkre, B; Velu, S; Chattopadhyay, D

    2008-12-01

    We have employed a structure-based three-dimensional quantitative structure-activity relationship (3D-QSAR) approach to predict the biochemical activity for inhibitors of T. cruzi dihydrofolate reductase-thymidylate synthase (DHFR-TS). Crystal structures of complexes of the enzyme with eight different inhibitors of the DHFR activity together with the structure in the substrate-free state (DHFR domain) were used to validate and refine docking poses of ligands that constitute likely active conformations. Structural information from these complexes formed the basis for the structure-based alignment used as input for the QSAR study. Contrary to indirect ligand-based approaches the strategy described here employs a direct receptor-based approach. The goal is to generate a library of selective lead inhibitors for further development as antiparasitic agents. 3D-QSAR models were obtained for T. cruzi DHFR-TS (30 inhibitors in learning set) and human DHFR (36 inhibitors in learning set) that show a very good agreement between experimental and predicted enzyme inhibition data. For crossvalidation of the QSAR model(s), we have used the 10% leave-one-out method. The derived 3D-QSAR models were tested against a few selected compounds (a small test set of six inhibitors for each enzyme) with known activity, which were not part of the learning set, and the quality of prediction of the initial 3D-QSAR models demonstrated that such studies are feasible. Further refinement of the models through integration of additional activity data and optimization of reliable docking poses is expected to lead to an improved predictive ability.

  18. Intraoral 3D scanner

    NASA Astrophysics Data System (ADS)

    Kühmstedt, Peter; Bräuer-Burchardt, Christian; Munkelt, Christoph; Heinze, Matthias; Palme, Martin; Schmidt, Ingo; Hintersehr, Josef; Notni, Gunther

    2007-09-01

    Here a new set-up of a 3D-scanning system for CAD/CAM in dental industry is proposed. The system is designed for direct scanning of the dental preparations within the mouth. The measuring process is based on phase correlation technique in combination with fast fringe projection in a stereo arrangement. The novelty in the approach is characterized by the following features: A phase correlation between the phase values of the images of two cameras is used for the co-ordinate calculation. This works contrary to the usage of only phase values (phasogrammetry) or classical triangulation (phase values and camera image co-ordinate values) for the determination of the co-ordinates. The main advantage of the method is that the absolute value of the phase at each point does not directly determine the coordinate. Thus errors in the determination of the co-ordinates are prevented. Furthermore, using the epipolar geometry of the stereo-like arrangement the phase unwrapping problem of fringe analysis can be solved. The endoscope like measurement system contains one projection and two camera channels for illumination and observation of the object, respectively. The new system has a measurement field of nearly 25mm × 15mm. The user can measure two or three teeth at one time. So the system can by used for scanning of single tooth up to bridges preparations. In the paper the first realization of the intraoral scanner is described.

  19. 'Diamond' in 3-D

    NASA Technical Reports Server (NTRS)

    2004-01-01

    This 3-D, microscopic imager mosaic of a target area on a rock called 'Diamond Jenness' was taken after NASA's Mars Exploration Rover Opportunity ground into the surface with its rock abrasion tool for a second time.

    Opportunity has bored nearly a dozen holes into the inner walls of 'Endurance Crater.' On sols 177 and 178 (July 23 and July 24, 2004), the rover worked double-duty on Diamond Jenness. Surface debris and the bumpy shape of the rock resulted in a shallow and irregular hole, only about 2 millimeters (0.08 inch) deep. The final depth was not enough to remove all the bumps and leave a neat hole with a smooth floor. This extremely shallow depression was then examined by the rover's alpha particle X-ray spectrometer.

    On Sol 178, Opportunity's 'robotic rodent' dined on Diamond Jenness once again, grinding almost an additional 5 millimeters (about 0.2 inch). The rover then applied its Moessbauer spectrometer to the deepened hole. This double dose of Diamond Jenness enabled the science team to examine the rock at varying layers. Results from those grindings are currently being analyzed.

    The image mosaic is about 6 centimeters (2.4 inches) across.

  20. Prominent rocks - 3D

    NASA Technical Reports Server (NTRS)

    1997-01-01

    Many prominent rocks near the Sagan Memorial Station are featured in this image, taken in stereo by the Imager for Mars Pathfinder (IMP) on Sol 3. 3D glasses are necessary to identify surface detail. Wedge is at lower left; Shark, Half-Dome, and Pumpkin are at center. Flat Top, about four inches high, is at lower right. The horizon in the distance is one to two kilometers away.

    Mars Pathfinder is the second in NASA's Discovery program of low-cost spacecraft with highly focused science goals. The Jet Propulsion Laboratory, Pasadena, CA, developed and manages the Mars Pathfinder mission for NASA's Office of Space Science, Washington, D.C. JPL is an operating division of the California Institute of Technology (Caltech). The Imager for Mars Pathfinder (IMP) was developed by the University of Arizona Lunar and Planetary Laboratory under contract to JPL. Peter Smith is the Principal Investigator.

    Click below to see the left and right views individually. [figure removed for brevity, see original site] Left [figure removed for brevity, see original site] Right

  1. Pharmacophore modeling and virtual screening for designing potential PLK1 inhibitors.

    PubMed

    Wang, Hui-Yuan; Cao, Zhi-Xing; Li, Lin-Li; Jiang, Pei-Du; Zhao, Ying-Lan; Luo, Shi-Dong; Yang, Li; Wei, Yu-Quan; Yang, Sheng-Yong

    2008-09-15

    Pharmacophore models of Polo-like kinase-1 (PLK1) inhibitors have been established by using the HipHop and HypoGen algorithms implemented in the Catalyst software package. The best quantitative pharmacophore model, Hypo1, which has the highest correlation coefficient (0.9895), consists of one hydrogen bond acceptor, one hydrogen bond donor, one hydrophobic feature, and one hydrophobic aliphatic feature. Hypo1 was further validated by test set and cross validation method. Then Hypo1 was used as a 3D query to screen several databases including Specs, NCI, Maybridge, and Chinese Nature Product Database (CNPD). The hit compounds were subsequently subjected to filtering by Lipinski's rule of five and docking study to refine the retrieved hits and as a result to reduce the rate of false positive. Finally, a total of 20 compounds were selected and have been shifted to in vitro and in vivo studies. As far as we know, this is the first report on the pharmacophore modeling even the first publicly reported virtual screening study of PLK1 inhibitors.

  2. Protein pharmacophore selection using hydration-site analysis

    PubMed Central

    Hu, Bingjie; Lill, Markus A.

    2012-01-01

    Virtual screening using pharmacophore models is an efficient method to identify potential lead compounds for target proteins. Pharmacophore models based on protein structures are advantageous because a priori knowledge of active ligands is not required and the models are not biased by the chemical space of previously identified actives. However, in order to capture most potential interactions between all potentially binding ligands and the protein, the size of the pharmacophore model, i.e. number of pharmacophore elements, is typically quite large and therefore reduces the efficiency of pharmacophore based screening. We have developed a new method to select important pharmacophore elements using hydration-site information. The basic premise is that ligand functional groups that replace water molecules in the apo protein contribute strongly to the overall binding affinity of the ligand, due to the additional free energy gained from releasing the water molecule into the bulk solvent. We computed the free energy of water released from the binding site for each hydration site using thermodynamic analysis of molecular dynamics (MD) simulations. Pharmacophores which are co-localized with hydration sites with estimated favorable contributions to the free energy of binding are selected to generate a reduced pharmacophore model. We constructed reduced pharmacophore models for three protein systems and demonstrated good enrichment quality combined with high efficiency. The reduction in pharmacophore model size reduces the required screening time by a factor of 200–500 compared to using all protein pharmacophore elements. We also describe a training process using a small set of known actives to reliably select the optimal set of criteria for pharmacophore selection for each protein system. PMID:22397751

  3. Discovery of dual binding site acetylcholinesterase inhibitors identified by pharmacophore modeling and sequential virtual screening techniques.

    PubMed

    Gupta, Shikhar; Fallarero, Adyary; Järvinen, Päivi; Karlsson, Daniela; Johnson, Mark S; Vuorela, Pia M; Mohan, C Gopi

    2011-02-15

    Dual binding site acetylcholinesterase (AChE) inhibitors are promising for the treatment of Alzheimer's disease (AD). They alleviate the cognitive deficits and AD-modifying agents, by inhibiting the β-amyloid (Aβ) peptide aggregation, through binding to both the catalytic and peripheral anionic sites, the so called dual binding site of the AChE enzyme. In this Letter, chemical features based 3D-pharmacophore models were developed based on the eight potent and structurally diverse AChE inhibitors (I-VIII) obtained from high-throughput in vitro screening technique. The best 3D-pharmacophore model, Hypo1, consists of two hydrogen-bond acceptor lipid, one hydrophobe, and two hydrophobic aliphatic features obtained by Catalyst/HIPHOP algorithm adopted in Discovery studio program. Hypo1 was used as a 3D query in sequential virtual screening study to filter three small compound databases. Further, a total of nine compounds were selected and followed on in vitro analysis. Finally, we identified two leads--Specs1 (IC(50)=3.279 μM) and Spec2 (IC(50)=5.986 μM) dual binding site compounds from Specs database, having good AChE enzyme inhibitory activity.

  4. Three-dimensional QSAR analysis and design of new 1,2,4-oxadiazole antibacterials.

    PubMed

    Leemans, Erika; Mahasenan, Kiran V; Kumarasiri, Malika; Spink, Edward; Ding, Derong; O'Daniel, Peter I; Boudreau, Marc A; Lastochkin, Elena; Testero, Sebastian A; Yamaguchi, Takao; Lee, Mijoon; Hesek, Dusan; Fisher, Jed F; Chang, Mayland; Mobashery, Shahriar

    2016-02-01

    The oxadiazole antibacterials, a class of newly discovered compounds that are active against Gram-positive bacteria, target bacterial cell-wall biosynthesis by inhibition of a family of essential enzymes, the penicillin-binding proteins. Ligand-based 3D-QSAR analyses by comparative molecular field analysis (CoMFA), comparative molecular shape indices analysis (CoMSIA) and Field-Based 3D-QSAR evaluated a series of 102 members of this class. This series included inactive compounds as well as compounds that were moderately to strongly antibacterial against Staphylococcus aureus. Multiple models were constructed using different types of energy minimization and charge calculations. CoMFA derived contour maps successfully defined favored and disfavored regions of the molecules in terms of steric and electrostatic properties for substitution.

  5. Discovery of potent inhibitors of pseudomonal quorum sensing via pharmacophore modeling and in silico screening.

    PubMed

    Taha, Mutasem O; Al-Bakri, Amal G; Zalloum, Waleed A

    2006-11-15

    HipHop-Refine was employed to derive a binding hypothesis for pseudomonal quorum sensing (QS) antagonists. The model was employed as 3D search query to screen the National Cancer Institute (NCI) database. One of the hits illustrated nanomolar QS inhibitory activity. The fact that this compound contained tetravalent lead (Pb) prompted us to evaluate the activities of phenyl mercuric nitrate and thimerosal, both fit the binding pharmacophore. The two mercurials illustrated nanomolar to low micromolar IC50 inhibitory values against pseudomonal QS. The three compounds represent a new class of QS inhibitors.

  6. Pharmacophore identification, in silico screening, and virtual library design for inhibitors of the human factor Xa.

    PubMed

    Krovat, Eva M; Frühwirth, Karin H; Langer, Thierry

    2005-01-01

    Factor Xa inhibitors are innovative anticoagulant agents that provide a better safety/efficacy profile compared to other anticoagulative drugs. A chemical feature-based modeling approach was applied to identify crucial pharmacophore patterns from 3D crystal structures of inhibitors bound to human factor Xa (Pdb entries 1fjs, 1kns, 1eqz) using the software LIGANDSCOUT and CATALYST. The complex structures were selected regarding the criteria of high inhibitory potency (i.e. all ligands show K(i) values against factor Xa in the subnanomolar range) and good resolution (i.e. at least 2.2 A) in order to generate selective and high quality pharmacophore models. The resulting chemical-feature based hypotheses were used for virtual screening of commercial molecular databases such as the WDI database. Furthermore, a ligand-based molecular modeling approach was performed to obtain common-feature hypotheses that represent the relevant chemical interactions between 10 bioactive factor Xa inhibitors and the protein, respectively. In a next step a virtual combinatorial library was designed in order to generate new compounds with similar chemical and spatial properties as known inhibitors. The software tool ILIB DIVERSE was used for this procedure in order to provide new scaffolds of this group of anticoagulants. Finally we present the combination of these two techniques, hence virtual screening was performed with selective pharmacophore models in a focused virtual combinatorial database. De novo derived molecular scaffolds that were able to adequately satisfy the pharmacophore criteria are revealed and are promising templates for candidates for further development.

  7. Theoretical studies on QSAR and mechanism of 2-indolinone derivatives as tubulin inhibitors

    NASA Astrophysics Data System (ADS)

    Liao, Si Yan; Qian, Li; Miao, Ti Fang; Lu, Hai Liang; Zheng, Kang Cheng

    The theoretical studies on three-dimensional quantitative structure activity relationship (3D-QSAR) and action mechanism of a series of 2-indolinone derivatives as tubulin inhibitors against human breast cancer cell line MDA-MB-231 have been carried out. The established 3D-QSAR model from the comparative molecular field analysis (CoMFA) shows not only significant statistical quality but also predictive ability, with high correlation coefficient (R2 = 0.986) and cross-validation coefficient (q2 = 0.683). In particular, the appropriate binding orientations and conformations of these 2-indolinone derivatives interacting with tubulin are located by docking study, and it is very interesting to find that the plot of the energy scores of these compounds in DOCK versus the corresponding experimental pIC50 values exhibits a considerable linear correlation. Therefore, the inhibition mechanism that 2-indolinone derivatives were regarded as tubulin inhibitors can be theoretically confirmed. Based on such an inhibition mechanism along with 3D-QSAR results, some important factors improving the activities of these compounds were discussed in detail. These factors can be summarized as follows: the H atom adopted as substituent R1, the substituent R2 with higher electropositivity and smaller bulk, the substituents R4-R6 (on the phenyl ring) with higher electropositivity and larger bulk, and so on. These results can offer useful theoretical references for understanding the action mechanism, designing more potent inhibitors, and predicting their activities prior to synthesis.

  8. QSAR analyses of DDT analogues and their in silico validation using molecular docking study against voltage-gated sodium channel of Anopheles funestus.

    PubMed

    Saini, V; Kumar, A

    2014-01-01

    DDT has enjoyed the reputation of a successful pesticide in disease control programme and agricultural practices along with the serious opposition and ban later on due to its biomagnification and toxic action against non-target organisms. The present work was carried out to develop QSAR models for analysing DDT analogues for their pesticidal activity and in silico validation of these models. A 2D-QSAR model was generated using stepwise with multiple regression, and the model with a value of r(2) = 0.7324; q(2) = 0.6215; pred r(2) = 0.7038, containing five descriptors, was selected for further study. The 3D QSAR with CoMFA analysis showed that steric contribution of 21% and electrostatic contribution of about 79% were required for larvicidal activity of DDT analogues. A set of 3430 molecules was generated using the basic DDT skeleton as template, and these were evaluated for their mosquito larvicidal activity using the generated QSAR models and DDT as standard. Eleven molecules were selected for in silico validation of these models. For this, a docking study of the selected molecules against the homology-modelled voltage-gated sodium channel of Anopheles funestus was conducted. The study showed that the activities of these analogues as predicted by 2D-QSAR, 3D-QSAR with CoMFA and dock score were observed to be well correlated.

  9. A new computer program for QSAR-analysis: ARTE-QSAR.

    PubMed

    Van Damme, Sofie; Bultinck, Patrick

    2007-08-01

    A new computer program has been designed to build and analyze quantitative-structure activity relationship (QSAR) models through regression analysis. The user is provided with a range of regression and validation techniques. The emphasis of the program lies mainly in the validation of QSAR models in chemical applications. ARTE-QSAR produces an easy interpretable output from which the user can conclude if the obtained model is suitable for prediction and analysis.

  10. First molecular modeling report on novel arylpyrimidine kynurenine monooxygenase inhibitors through multi-QSAR analysis against Huntington's disease: A proposal to chemists!

    PubMed

    Amin, Sk Abdul; Adhikari, Nilanjan; Jha, Tarun; Gayen, Shovanlal

    2016-12-01

    Huntington's disease (HD) is caused by mutation of huntingtin protein (mHtt) leading to neuronal cell death. The mHtt induced toxicity can be rescued by inhibiting the kynurenine monooxygenase (KMO) enzyme. Therefore, KMO is a promising drug target to address the neurodegenerative disorders such as Huntington's diseases. Fiftysix arylpyrimidine KMO inhibitors are structurally explored through regression and classification based multi-QSAR modeling, pharmacophore mapping and molecular docking approaches. Moreover, ten new compounds are proposed and validated through the modeling that may be effective in accelerating Huntington's disease drug discovery efforts.

  11. 3D Spectroscopy in Astronomy

    NASA Astrophysics Data System (ADS)

    Mediavilla, Evencio; Arribas, Santiago; Roth, Martin; Cepa-Nogué, Jordi; Sánchez, Francisco

    2011-09-01

    Preface; Acknowledgements; 1. Introductory review and technical approaches Martin M. Roth; 2. Observational procedures and data reduction James E. H. Turner; 3. 3D Spectroscopy instrumentation M. A. Bershady; 4. Analysis of 3D data Pierre Ferruit; 5. Science motivation for IFS and galactic studies F. Eisenhauer; 6. Extragalactic studies and future IFS science Luis Colina; 7. Tutorials: how to handle 3D spectroscopy data Sebastian F. Sánchez, Begona García-Lorenzo and Arlette Pécontal-Rousset.

  12. Spherical 3D isotropic wavelets

    NASA Astrophysics Data System (ADS)

    Lanusse, F.; Rassat, A.; Starck, J.-L.

    2012-04-01

    Context. Future cosmological surveys will provide 3D large scale structure maps with large sky coverage, for which a 3D spherical Fourier-Bessel (SFB) analysis in spherical coordinates is natural. Wavelets are particularly well-suited to the analysis and denoising of cosmological data, but a spherical 3D isotropic wavelet transform does not currently exist to analyse spherical 3D data. Aims: The aim of this paper is to present a new formalism for a spherical 3D isotropic wavelet, i.e. one based on the SFB decomposition of a 3D field and accompany the formalism with a public code to perform wavelet transforms. Methods: We describe a new 3D isotropic spherical wavelet decomposition based on the undecimated wavelet transform (UWT) described in Starck et al. (2006). We also present a new fast discrete spherical Fourier-Bessel transform (DSFBT) based on both a discrete Bessel transform and the HEALPIX angular pixelisation scheme. We test the 3D wavelet transform and as a toy-application, apply a denoising algorithm in wavelet space to the Virgo large box cosmological simulations and find we can successfully remove noise without much loss to the large scale structure. Results: We have described a new spherical 3D isotropic wavelet transform, ideally suited to analyse and denoise future 3D spherical cosmological surveys, which uses a novel DSFBT. We illustrate its potential use for denoising using a toy model. All the algorithms presented in this paper are available for download as a public code called MRS3D at http://jstarck.free.fr/mrs3d.html

  13. Profile-QSAR: a novel meta-QSAR method that combines activities across the kinase family to accurately predict affinity, selectivity, and cellular activity.

    PubMed

    Martin, Eric; Mukherjee, Prasenjit; Sullivan, David; Jansen, Johanna

    2011-08-22

    Profile-QSAR is a novel 2D predictive model building method for kinases. This "meta-QSAR" method models the activity of each compound against a new kinase target as a linear combination of its predicted activities against a large panel of 92 previously studied kinases comprised from 115 assays. Profile-QSAR starts with a sparse incomplete kinase by compound (KxC) activity matrix, used to generate Bayesian QSAR models for the 92 "basis-set" kinases. These Bayesian QSARs generate a complete "synthetic" KxC activity matrix of predictions. These synthetic activities are used as "chemical descriptors" to train partial-least squares (PLS) models, from modest amounts of medium-throughput screening data, for predicting activity against new kinases. The Profile-QSAR predictions for the 92 kinases (115 assays) gave a median external R²(ext) = 0.59 on 25% held-out test sets. The method has proven accurate enough to predict pairwise kinase selectivities with a median correlation of R²(ext) = 0.61 for 958 kinase pairs with at least 600 common compounds. It has been further expanded by adding a "C(k)XC" cellular activity matrix to the KxC matrix to predict cellular activity for 42 kinase driven cellular assays with median R²(ext) = 0.58 for 24 target modulation assays and R²(ext) = 0.41 for 18 cell proliferation assays. The 2D Profile-QSAR, along with the 3D Surrogate AutoShim, are the foundations of an internally developed iterative medium-throughput screening (IMTS) methodology for virtual screening (VS) of compound archives as an alternative to experimental high-throughput screening (HTS). The method has been applied to 20 actual prospective kinase projects. Biological results have so far been obtained in eight of them. Q² values ranged from 0.3 to 0.7. Hit-rates at 10 uM for experimentally tested compounds varied from 25% to 80%, except in K5, which was a special case aimed specifically at finding "type II" binders, where none of the compounds were predicted to be

  14. 3D Elevation Program—Virtual USA in 3D

    USGS Publications Warehouse

    Lukas, Vicki; Stoker, J.M.

    2016-04-14

    The U.S. Geological Survey (USGS) 3D Elevation Program (3DEP) uses a laser system called ‘lidar’ (light detection and ranging) to create a virtual reality map of the Nation that is very accurate. 3D maps have many uses with new uses being discovered all the time.  

  15. CLIP: similarity searching of 3D databases using clique detection.

    PubMed

    Rhodes, Nicholas; Willett, Peter; Calvet, Alain; Dunbar, James B; Humblet, Christine

    2003-01-01

    This paper describes a program for 3D similarity searching, called CLIP (for Candidate Ligand Identification Program), that uses the Bron-Kerbosch clique detection algorithm to find those structures in a file that have large structures in common with a target structure. Structures are characterized by the geometric arrangement of pharmacophore points and the similarity between two structures calculated using modifications of the Simpson and Tanimoto association coefficients. This modification takes into account the fact that a distance tolerance is required to ensure that pairs of interatomic distances can be regarded as equivalent during the clique-construction stage of the matching algorithm. Experiments with HIV assay data demonstrate the effectiveness and the efficiency of this approach to virtual screening.

  16. Pharmacophore modeling of nilotinib as an inhibitor of ATP-binding cassette drug transporters and BCR-ABL kinase using a three-dimensional quantitative structure-activity relationship approach.

    PubMed

    Shukla, Suneet; Kouanda, Abdul; Silverton, Latoya; Talele, Tanaji T; Ambudkar, Suresh V

    2014-07-07

    Nilotinib (Tasigna) is a tyrosine kinase inhibitor approved by the FDA to treat chronic phase chronic myeloid leukemia patients. It is also a transport substrate of the ATP-binding cassette (ABC) drug efflux transporters ABCB1 (P-glycoprotein, P-gp) and ABCG2 (BCRP), which may have an effect on the pharmacokinetics and toxicity of this drug. The goal of this study was to identify pharmacophoric features of nilotinib in order to potentially develop specific inhibitors of BCR-ABL kinase with minimal interactions with ABC drug transporters. Three-dimensional pharmacophore modeling and quantitative structure-activity relationship (QSAR) studies were carried out on a series of nilotinib analogues to identify chemical features that contribute to inhibitory activity of nilotinib against BCR-ABL kinase activity, P-gp, and ABCG2. Twenty-five derivatives of nilotinib were synthesized and were then tested to measure their activity to inhibit BCR-ABL kinase and to inhibit the function of ABC drug transporters. A set of in vitro experiments including kinase activity and cell-based transport assays and photolabeling of P-gp and ABCG2 with a transport substrate, [(125)I]-iodoarylazido-prazosin (IAAP), were carried out in isolated membranes to evaluate the potency of the derivatives to inhibit the function of ABC drug transporters and BCR-ABL kinase. Sixteen, fourteen, and ten compounds were selected as QSAR data sets, respectively, to generate PHASE v3.1 pharmacophore models for BCR-ABL kinase, ABCG2, and P-gp inhibitors. The IC50 values of these derivatives against P-gp, ABCG2, or BCR-ABL kinase were used to generate pharmacophore features required for optimal interactions with these targets. A seven-point pharmacophore (AADDRRR) for BCR-ABL kinase inhibitory activity, a six-point pharmacophore (ADHRRR) for ABCG2 inhibitory activity, and a seven-point pharmacophore (AADDRRR) for P-gp inhibitory activity were generated. The derived models clearly demonstrate high predictive power

  17. Pharmacophore Modeling of Nilotinib as an Inhibitor of ATP-Binding Cassette Drug Transporters and BCR-ABL Kinase Using a Three-Dimensional Quantitative Structure–Activity Relationship Approach

    PubMed Central

    2015-01-01

    Nilotinib (Tasigna) is a tyrosine kinase inhibitor approved by the FDA to treat chronic phase chronic myeloid leukemia patients. It is also a transport substrate of the ATP-binding cassette (ABC) drug efflux transporters ABCB1 (P-glycoprotein, P-gp) and ABCG2 (BCRP), which may have an effect on the pharmacokinetics and toxicity of this drug. The goal of this study was to identify pharmacophoric features of nilotinib in order to potentially develop specific inhibitors of BCR-ABL kinase with minimal interactions with ABC drug transporters. Three-dimensional pharmacophore modeling and quantitative structure–activity relationship (QSAR) studies were carried out on a series of nilotinib analogues to identify chemical features that contribute to inhibitory activity of nilotinib against BCR-ABL kinase activity, P-gp, and ABCG2. Twenty-five derivatives of nilotinib were synthesized and were then tested to measure their activity to inhibit BCR-ABL kinase and to inhibit the function of ABC drug transporters. A set of in vitro experiments including kinase activity and cell-based transport assays and photolabeling of P-gp and ABCG2 with a transport substrate, [125I]-iodoarylazido-prazosin (IAAP), were carried out in isolated membranes to evaluate the potency of the derivatives to inhibit the function of ABC drug transporters and BCR-ABL kinase. Sixteen, fourteen, and ten compounds were selected as QSAR data sets, respectively, to generate PHASE v3.1 pharmacophore models for BCR-ABL kinase, ABCG2, and P-gp inhibitors. The IC50 values of these derivatives against P-gp, ABCG2, or BCR-ABL kinase were used to generate pharmacophore features required for optimal interactions with these targets. A seven-point pharmacophore (AADDRRR) for BCR-ABL kinase inhibitory activity, a six-point pharmacophore (ADHRRR) for ABCG2 inhibitory activity, and a seven-point pharmacophore (AADDRRR) for P-gp inhibitory activity were generated. The derived models clearly demonstrate high predictive power

  18. Molecular docking and QSAR of aplyronine A and analogues: potent inhibitors of actin

    NASA Astrophysics Data System (ADS)

    Hussain, Abrar; Melville, James L.; Hirst, Jonathan D.

    2010-01-01

    Actin-binding natural products have been identified as a potential basis for the design of cancer therapeutic agents. We report flexible docking and QSAR studies on aplyronine A analogues. Our findings show the macrolide `tail' to be fundamental for the depolymerisation effect of actin-binding macrolides and that it is the tail which forms the initial interaction with the actin rather than the macrocycle, as previously believed. Docking energy scores for the compounds were highly correlated with actin depolymerisation activity. The 3D-QSAR models were predictive, with the best model giving a q 2 value of 0.85 and a r 2 of 0.94. Results from the docking simulations and the interpretation from QSAR "coeff*stdev" contour maps provide insight into the binding mechanism of each analogue and highlight key features that influence depolymerisation activity. The results herein may aid the design of a putative set of analogues that can help produce efficacious and tolerable anti-tumour agents. Finally, using the best QSAR model, we have also made genuine predictions for an independent set of recently reported aplyronine analogues.

  19. A specific pharmacophore model of Aurora B kinase inhibitors and virtual screening studies based on it.

    PubMed

    Wang, Hui-Yuan; Li, Lin-Li; Cao, Zhi-Xing; Luo, Shi-Dong; Wei, Yu-Quan; Yang, Sheng-Yong

    2009-01-01

    In this study, 3D-pharmacophore models of Aurora B kinase inhibitors have been developed by using HipHop and HypoGen modules in Catalyst software package. The best pharmacophore model, Hypo1, which has the highest correlation coefficient (0.9911), consists of one hydrogen-bond acceptor, one hydrogen-bond donor, one hydrophobic aliphatic moiety and one ring aromatic feature. Hypo1 was validated by test set and cross-validation methods. And the specificity of Hypo1 to Aurora B inhibitors was examined with the use of selective inhibitors against Aurora B and its paralogue Aurora A. The results clearly indicate that Hypo1 can differentiate selective inhibitors of Aurora B from those of Aurora A, and the ring aromatic feature likely plays some important roles for the specificity of Hypo1. Then Hypo1 was used as a 3D query to screen several databases including Specs, NCI, Maybridge and Chinese Nature Product Database (CNPD) for identifying new inhibitors of Aurora B. The hit compounds were subsequently subjected to filtering by Lipinski's rule of five and docking studies to refine the retrieved hits, and some compounds selected from the top ranked hits have been suggested for further experimental assay studies.

  20. First Chemical Feature Based Pharmacophore Modeling of Potent Retinoidal Retinoic Acid Metabolism Blocking Agents (RAMBAs): Identification of Novel RAMBA Scaffolds

    PubMed Central

    Purushottamachar, Puranik; Patel, Jyoti B.; Gediya, Lalji K; Clement, Omoshile O.; Njar, Vincent C. O.

    2011-01-01

    The first three-dimensional (3D) pharmacophore model was developed for potent retinoidal retinoic acid metabolism blocking agents (RAMBAs) with IC50 values ranging from 0.0009 to 5.84 nM. The seven common chemical features in these RAMBAs as deduced by the Catalyst/HipHop program include five hydrophobic groups (hydrophobes), one hydrogen bond acceptor (HBA) and one ring aromatic group. Using the pharmacophore model as a 3D search query against NCI and Maybridge conformational Catalyst formatted databases; we retrieved several compounds with different structures (scaffolds) as hits. Twenty one retrieved hits were tested for RAMBA activity at 100 nM concentration. The most potent of these compounds, NCI10308597 and HTS01914 showed inhibitory potencies less (54.7% and 53.2%, respectively, at 100 nM) than those of our best previously reported RAMBAs VN/12-1 and VN/14-1 (90% and 86%, respectively, at 100 nM). Docking studies using a CYP26A1 homology model revealed that our most potent RAMBAs showed similar binding to the one observed for a series of RAMBAs reported previously by others. Our data shows the potential of our pharmacophore model in identifying structurally diverse and potent RAMBAs. Further refinement of the model and searches of other robust databases is currently in progress with a view to identifying and optimizing new leads. PMID:22130607

  1. 3D World Building System

    ScienceCinema

    None

    2016-07-12

    This video provides an overview of the Sandia National Laboratories developed 3-D World Model Building capability that provides users with an immersive, texture rich 3-D model of their environment in minutes using a laptop and color and depth camera.

  2. 3D Buckligami: Digital Matter

    NASA Astrophysics Data System (ADS)

    van Hecke, Martin; de Reus, Koen; Florijn, Bastiaan; Coulais, Corentin

    2014-03-01

    We present a class of elastic structures which exhibit collective buckling in 3D, and create these by a 3D printing/moulding technique. Our structures consist of cubic lattice of anisotropic unit cells, and we show that their mechanical properties are programmable via the orientation of these unit cells.

  3. 3D World Building System

    SciTech Connect

    2013-10-30

    This video provides an overview of the Sandia National Laboratories developed 3-D World Model Building capability that provides users with an immersive, texture rich 3-D model of their environment in minutes using a laptop and color and depth camera.

  4. LLNL-Earth3D

    SciTech Connect

    2013-10-01

    Earth3D is a computer code designed to allow fast calculation of seismic rays and travel times through a 3D model of the Earth. LLNL is using this for earthquake location and global tomography efforts and such codes are of great interest to the Earth Science community.

  5. Market study: 3-D eyetracker

    NASA Technical Reports Server (NTRS)

    1977-01-01

    A market study of a proposed version of a 3-D eyetracker for initial use at NASA's Ames Research Center was made. The commercialization potential of a simplified, less expensive 3-D eyetracker was ascertained. Primary focus on present and potential users of eyetrackers, as well as present and potential manufacturers has provided an effective means of analyzing the prospects for commercialization.

  6. Euro3D Science Conference

    NASA Astrophysics Data System (ADS)

    Walsh, J. R.

    2004-02-01

    The Euro3D RTN is an EU funded Research Training Network to foster the exploitation of 3D spectroscopy in Europe. 3D spectroscopy is a general term for spectroscopy of an area of the sky and derives its name from its two spatial + one spectral dimensions. There are an increasing number of instruments which use integral field devices to achieve spectroscopy of an area of the sky, either using lens arrays, optical fibres or image slicers, to pack spectra of multiple pixels on the sky (``spaxels'') onto a 2D detector. On account of the large volume of data and the special methods required to reduce and analyse 3D data, there are only a few centres of expertise and these are mostly involved with instrument developments. There is a perceived lack of expertise in 3D spectroscopy spread though the astronomical community and its use in the armoury of the observational astronomer is viewed as being highly specialised. For precisely this reason the Euro3D RTN was proposed to train young researchers in this area and develop user tools to widen the experience with this particular type of data in Europe. The Euro3D RTN is coordinated by Martin M. Roth (Astrophysikalisches Institut Potsdam) and has been running since July 2002. The first Euro3D science conference was held in Cambridge, UK from 22 to 23 May 2003. The main emphasis of the conference was, in keeping with the RTN, to expose the work of the young post-docs who are funded by the RTN. In addition the team members from the eleven European institutes involved in Euro3D also presented instrumental and observational developments. The conference was organized by Andy Bunker and held at the Institute of Astronomy. There were over thirty participants and 26 talks covered the whole range of application of 3D techniques. The science ranged from Galactic planetary nebulae and globular clusters to kinematics of nearby galaxies out to objects at high redshift. Several talks were devoted to reporting recent observations with newly

  7. 3D vision system assessment

    NASA Astrophysics Data System (ADS)

    Pezzaniti, J. Larry; Edmondson, Richard; Vaden, Justin; Hyatt, Bryan; Chenault, David B.; Kingston, David; Geulen, Vanilynmae; Newell, Scott; Pettijohn, Brad

    2009-02-01

    In this paper, we report on the development of a 3D vision system consisting of a flat panel stereoscopic display and auto-converging stereo camera and an assessment of the system's use for robotic driving, manipulation, and surveillance operations. The 3D vision system was integrated onto a Talon Robot and Operator Control Unit (OCU) such that direct comparisons of the performance of a number of test subjects using 2D and 3D vision systems were possible. A number of representative scenarios were developed to determine which tasks benefited most from the added depth perception and to understand when the 3D vision system hindered understanding of the scene. Two tests were conducted at Fort Leonard Wood, MO with noncommissioned officers ranked Staff Sergeant and Sergeant First Class. The scenarios; the test planning, approach and protocols; the data analysis; and the resulting performance assessment of the 3D vision system are reported.

  8. 3D printing in dentistry.

    PubMed

    Dawood, A; Marti Marti, B; Sauret-Jackson, V; Darwood, A

    2015-12-01

    3D printing has been hailed as a disruptive technology which will change manufacturing. Used in aerospace, defence, art and design, 3D printing is becoming a subject of great interest in surgery. The technology has a particular resonance with dentistry, and with advances in 3D imaging and modelling technologies such as cone beam computed tomography and intraoral scanning, and with the relatively long history of the use of CAD CAM technologies in dentistry, it will become of increasing importance. Uses of 3D printing include the production of drill guides for dental implants, the production of physical models for prosthodontics, orthodontics and surgery, the manufacture of dental, craniomaxillofacial and orthopaedic implants, and the fabrication of copings and frameworks for implant and dental restorations. This paper reviews the types of 3D printing technologies available and their various applications in dentistry and in maxillofacial surgery.

  9. PLOT3D user's manual

    NASA Technical Reports Server (NTRS)

    Walatka, Pamela P.; Buning, Pieter G.; Pierce, Larry; Elson, Patricia A.

    1990-01-01

    PLOT3D is a computer graphics program designed to visualize the grids and solutions of computational fluid dynamics. Seventy-four functions are available. Versions are available for many systems. PLOT3D can handle multiple grids with a million or more grid points, and can produce varieties of model renderings, such as wireframe or flat shaded. Output from PLOT3D can be used in animation programs. The first part of this manual is a tutorial that takes the reader, keystroke by keystroke, through a PLOT3D session. The second part of the manual contains reference chapters, including the helpfile, data file formats, advice on changing PLOT3D, and sample command files.

  10. PLOT3D/AMES, APOLLO UNIX VERSION USING GMR3D (WITHOUT TURB3D)

    NASA Technical Reports Server (NTRS)

    Buning, P.

    1994-01-01

    PLOT3D is an interactive graphics program designed to help scientists visualize computational fluid dynamics (CFD) grids and solutions. Today, supercomputers and CFD algorithms can provide scientists with simulations of such highly complex phenomena that obtaining an understanding of the simulations has become a major problem. Tools which help the scientist visualize the simulations can be of tremendous aid. PLOT3D/AMES offers more functions and features, and has been adapted for more types of computers than any other CFD graphics program. Version 3.6b+ is supported for five computers and graphic libraries. Using PLOT3D, CFD physicists can view their computational models from any angle, observing the physics of problems and the quality of solutions. As an aid in designing aircraft, for example, PLOT3D's interactive computer graphics can show vortices, temperature, reverse flow, pressure, and dozens of other characteristics of air flow during flight. As critical areas become obvious, they can easily be studied more closely using a finer grid. PLOT3D is part of a computational fluid dynamics software cycle. First, a program such as 3DGRAPE (ARC-12620) helps the scientist generate computational grids to model an object and its surrounding space. Once the grids have been designed and parameters such as the angle of attack, Mach number, and Reynolds number have been specified, a "flow-solver" program such as INS3D (ARC-11794 or COS-10019) solves the system of equations governing fluid flow, usually on a supercomputer. Grids sometimes have as many as two million points, and the "flow-solver" produces a solution file which contains density, x- y- and z-momentum, and stagnation energy for each grid point. With such a solution file and a grid file containing up to 50 grids as input, PLOT3D can calculate and graphically display any one of 74 functions, including shock waves, surface pressure, velocity vectors, and particle traces. PLOT3D's 74 functions are organized into

  11. PLOT3D/AMES, APOLLO UNIX VERSION USING GMR3D (WITH TURB3D)

    NASA Technical Reports Server (NTRS)

    Buning, P.

    1994-01-01

    PLOT3D is an interactive graphics program designed to help scientists visualize computational fluid dynamics (CFD) grids and solutions. Today, supercomputers and CFD algorithms can provide scientists with simulations of such highly complex phenomena that obtaining an understanding of the simulations has become a major problem. Tools which help the scientist visualize the simulations can be of tremendous aid. PLOT3D/AMES offers more functions and features, and has been adapted for more types of computers than any other CFD graphics program. Version 3.6b+ is supported for five computers and graphic libraries. Using PLOT3D, CFD physicists can view their computational models from any angle, observing the physics of problems and the quality of solutions. As an aid in designing aircraft, for example, PLOT3D's interactive computer graphics can show vortices, temperature, reverse flow, pressure, and dozens of other characteristics of air flow during flight. As critical areas become obvious, they can easily be studied more closely using a finer grid. PLOT3D is part of a computational fluid dynamics software cycle. First, a program such as 3DGRAPE (ARC-12620) helps the scientist generate computational grids to model an object and its surrounding space. Once the grids have been designed and parameters such as the angle of attack, Mach number, and Reynolds number have been specified, a "flow-solver" program such as INS3D (ARC-11794 or COS-10019) solves the system of equations governing fluid flow, usually on a supercomputer. Grids sometimes have as many as two million points, and the "flow-solver" produces a solution file which contains density, x- y- and z-momentum, and stagnation energy for each grid point. With such a solution file and a grid file containing up to 50 grids as input, PLOT3D can calculate and graphically display any one of 74 functions, including shock waves, surface pressure, velocity vectors, and particle traces. PLOT3D's 74 functions are organized into

  12. QSID Tool: a new three-dimensional QSAR environmental tool

    NASA Astrophysics Data System (ADS)

    Park, Dong Sun; Kim, Jae Min; Lee, Young Bok; Ahn, Chang Ho

    2008-12-01

    QSID Tool (Quantitative structure-activity relationship tool for Innovative Discovery) was developed to provide an easy-to-use, robust and high quality environmental tool for 3D QSAR. Predictive models developed with QSID Tool can accelerate the discovery of lead compounds by enabling researchers to formulate and test hypotheses for optimizing efficacy and increasing drug safety and bioavailability early in the process of drug discovery. QSID Tool was evaluated by comparison with SYBYL® using two different datasets derived from the inhibitors of Trypsin (Böhm et al., J Med Chem 42:458, 1999) and p38-MAPK (Liverton et al., J Med Chem 42:2180, 1999; Romeiro et al., J Comput Aided Mol Des 19:385, 2005; Romeiro et al., J Mol Model 12:855, 2006). The results suggest that QSID Tool is a useful model for the prediction of new analogue activities.

  13. Unassisted 3D camera calibration

    NASA Astrophysics Data System (ADS)

    Atanassov, Kalin; Ramachandra, Vikas; Nash, James; Goma, Sergio R.

    2012-03-01

    With the rapid growth of 3D technology, 3D image capture has become a critical part of the 3D feature set on mobile phones. 3D image quality is affected by the scene geometry as well as on-the-device processing. An automatic 3D system usually assumes known camera poses accomplished by factory calibration using a special chart. In real life settings, pose parameters estimated by factory calibration can be negatively impacted by movements of the lens barrel due to shaking, focusing, or camera drop. If any of these factors displaces the optical axes of either or both cameras, vertical disparity might exceed the maximum tolerable margin and the 3D user may experience eye strain or headaches. To make 3D capture more practical, one needs to consider unassisted (on arbitrary scenes) calibration. In this paper, we propose an algorithm that relies on detection and matching of keypoints between left and right images. Frames containing erroneous matches, along with frames with insufficiently rich keypoint constellations, are detected and discarded. Roll, pitch yaw , and scale differences between left and right frames are then estimated. The algorithm performance is evaluated in terms of the remaining vertical disparity as compared to the maximum tolerable vertical disparity.

  14. 3D Scan Systems Integration

    DTIC Science & Technology

    2007-11-02

    AGENCY USE ONLY (Leave Blank) 2. REPORT DATE 5 Feb 98 4. TITLE AND SUBTITLE 3D Scan Systems Integration REPORT TYPE AND DATES COVERED...2-89) Prescribed by ANSI Std. Z39-1 298-102 [ EDO QUALITY W3PECTEDI DLA-ARN Final Report for US Defense Logistics Agency on DDFG-T2/P3: 3D...SCAN SYSTEMS INTEGRATION Contract Number SPO100-95-D-1014 Contractor Ohio University Delivery Order # 0001 Delivery Order Title 3D Scan Systems

  15. Combinatorial QSAR Modeling of Rat Acute Toxicity by Oral Exposure

    EPA Science Inventory

    Quantitative Structure-Activity Relationship (QSAR) toxicity models have become popular tools for identifying potential toxic compounds and prioritizing candidates for animal toxicity tests. However, few QSAR studies have successfully modeled large, diverse mammalian toxicity end...

  16. Review of synthesis, biological assay and QSAR studies of β-secretase inhibitors.

    PubMed

    Niño, Helena; García-Pintos, Isela; Rodríguez-Borges, José E; Escobar-Cubiella, Manolo; García-Mera, Xerardo; Prado-Prado, Francisco

    2011-12-01

    Alzheimer's disease (AD) is highly complex. While several pathologies characterize this disease, amyloid plaques, composed of the β-amyloid peptide, are hallmark neuropathological lesions in Alzheimer's disease brain. Indeed, a wealth of evidence suggests that β-amyloid is central to the pathophysiology of AD and is likely to play an early role in this intractable neurodegenerative disorder. The BACE-1 enzyme is essential for the generation of β-amyloid. BACE-1 knockout mice do not produce β-amyloid and are free from Alzheimer's associated pathologies, including neuronal loss and certain memory deficits. The fact that BACE-1 initiates the formation of β-amyloid, and the observation that BACE-1 levels are elevated in this disease provide direct and compelling reasons to develop therapies directed at BACE-1 inhibition, thus reducing β-amyloid and its associated toxicities. In this sense, quantitative structure-activity relationships (QSAR) could play an important role in studying these β-secretase inhibitors. QSAR models are necessary in order to guide the β-secretase synthesis. This work is aimed at reviewing different design and synthesis and computational studies for a very large and heterogeneous series of β-secretase inhibitors. First, we review design, synthesis, and Biological assay of β-secretase inhibitors. Next, we review 2D QSAR, 3D QSAR, CoMFA, CoMSIA and Docking with different compounds to find out the structural requirements. Next, we review QSAR studies using the method of Linear Discriminant Analysis (LDA) in order to understand the essential structural requirement for receptor binding for β- secretase inhibitors.

  17. A 3-D QSAR-BASED IDENTIFICATION ALGORITHM FOR POTENTIAL ESTROGEN RECEPTOR LIGANDS

    EPA Science Inventory

    Recent reports concerning the lethal effects of solar ultraviolet-B (UV-B) radiation on amphibians suggest that this stressor has the potential to impact some amphibian populations. In this study embryos and larvae of three anuran species, Rana pipiens, R. clamitans, and R. septe...

  18. Reliable Prescreening of Candidate NerveAgent Prophylaxes via 3D QSAR

    DTIC Science & Technology

    2005-12-31

    Dimethoate oxon no 33 215 3.668 Disulfoton ? no 2 5.699 Ethion oxon no 34 13 4.886 Malathion oxon no 35 1375 2.862 Methidathion oxon no 36 31 4.509 Phorate...collection. For E(met) versus E(orig), an important kinetic relationship is suggested: if the parent compound energies ultimately have relatively small...approximating the efficacy of multiple enzymatic and covalent inhibition reactions via thermochemistry rather than kinetic activation barriers may suggest

  19. A Mechanism-based 3D-QSAR Approach for Classification ...

    EPA Pesticide Factsheets

    Organophosphate (OP) and carbamate esters can inhibit acetylcholinesterase (AChE) by binding covalently to a serine residue in the enzyme active site, and their inhibitory potency depends largely on affinity for the enzyme and the reactivity of the ester. Despite this understanding, there has been no mechanism-based in silico approach for classification and prediction of the inhibitory potency of ether OPs or carbamates. This prompted us to develop a three dimensional prediction framework for OPs, carbamates, and their analogs. Inhibitory structures of a compound that can form the covalent bond were identified through analysis of docked conformations of the compound and its metabolites. Inhibitory potencies of the selected structures were then predicted using a previously developed three dimensional quantitative structure-active relationship. This approach was validated with a large number of structurally diverse OP and carbamate compounds encompassing widely used insecticides and structural analogs including OP flame retardants and thio- and dithiocarbamate pesticides. The modeling revealed that: (1) in addition to classical OP metabolic activation, the toxicity of carbamate compounds can be dependent on biotransformation, (2) OP and carbamate analogs such as OP flame retardants and thiocarbamate herbicides can act as AChEI, (3) hydrogen bonds at the oxyanion hole is critical for AChE inhibition through the covalent bond, and (4) π–π interaction with Trp86

  20. 3D polymer scaffold arrays.

    PubMed

    Simon, Carl G; Yang, Yanyin; Dorsey, Shauna M; Ramalingam, Murugan; Chatterjee, Kaushik

    2011-01-01

    We have developed a combinatorial platform for fabricating tissue scaffold arrays that can be used for screening cell-material interactions. Traditional research involves preparing samples one at a time for characterization and testing. Combinatorial and high-throughput (CHT) methods lower the cost of research by reducing the amount of time and material required for experiments by combining many samples into miniaturized specimens. In order to help accelerate biomaterials research, many new CHT methods have been developed for screening cell-material interactions where materials are presented to cells as a 2D film or surface. However, biomaterials are frequently used to fabricate 3D scaffolds, cells exist in vivo in a 3D environment and cells cultured in a 3D environment in vitro typically behave more physiologically than those cultured on a 2D surface. Thus, we have developed a platform for fabricating tissue scaffold libraries where biomaterials can be presented to cells in a 3D format.

  1. Autofocus for 3D imaging

    NASA Astrophysics Data System (ADS)

    Lee-Elkin, Forest

    2008-04-01

    Three dimensional (3D) autofocus remains a significant challenge for the development of practical 3D multipass radar imaging. The current 2D radar autofocus methods are not readily extendable across sensor passes. We propose a general framework that allows a class of data adaptive solutions for 3D auto-focus across passes with minimal constraints on the scene contents. The key enabling assumption is that portions of the scene are sparse in elevation which reduces the number of free variables and results in a system that is simultaneously solved for scatterer heights and autofocus parameters. The proposed method extends 2-pass interferometric synthetic aperture radar (IFSAR) methods to an arbitrary number of passes allowing the consideration of scattering from multiple height locations. A specific case from the proposed autofocus framework is solved and demonstrates autofocus and coherent multipass 3D estimation across the 8 passes of the "Gotcha Volumetric SAR Data Set" X-Band radar data.

  2. Combinatorial 3D Mechanical Metamaterials

    NASA Astrophysics Data System (ADS)

    Coulais, Corentin; Teomy, Eial; de Reus, Koen; Shokef, Yair; van Hecke, Martin

    2015-03-01

    We present a class of elastic structures which exhibit 3D-folding motion. Our structures consist of cubic lattices of anisotropic unit cells that can be tiled in a complex combinatorial fashion. We design and 3d-print this complex ordered mechanism, in which we combine elastic hinges and defects to tailor the mechanics of the material. Finally, we use this large design space to encode smart functionalities such as surface patterning and multistability.

  3. Sensitivity Analysis of QSAR Models for Assessing Novel Military Compounds

    DTIC Science & Technology

    2009-01-01

    erties, such as log P, would aid in estimating a chemical’s environmental fate and toxicology when applied to QSAR modeling. Granted, QSAR mod- els, such...ER D C TR -0 9 -3 Strategic Environmental Research and Development Program Sensitivity Analysis of QSAR Models for Assessing Novel...Environmental Research and Development Program ERDC TR-09-3 January 2009 Sensitivity Analysis of QSAR Models for Assessing Novel Military Compound

  4. Biomacromolecular quantitative structure-activity relationship (BioQSAR): a proof-of-concept study on the modeling, prediction and interpretation of protein-protein binding affinity

    NASA Astrophysics Data System (ADS)

    Zhou, Peng; Wang, Congcong; Tian, Feifei; Ren, Yanrong; Yang, Chao; Huang, Jian

    2013-01-01

    Quantitative structure-activity relationship (QSAR), a regression modeling methodology that establishes statistical correlation between structure feature and apparent behavior for a series of congeneric molecules quantitatively, has been widely used to evaluate the activity, toxicity and property of various small-molecule compounds such as drugs, toxicants and surfactants. However, it is surprising to see that such useful technique has only very limited applications to biomacromolecules, albeit the solved 3D atom-resolution structures of proteins, nucleic acids and their complexes have accumulated rapidly in past decades. Here, we present a proof-of-concept paradigm for the modeling, prediction and interpretation of the binding affinity of 144 sequence-nonredundant, structure-available and affinity-known protein complexes (Kastritis et al. Protein Sci 20:482-491, 2011) using a biomacromolecular QSAR (BioQSAR) scheme. We demonstrate that the modeling performance and predictive power of BioQSAR are comparable to or even better than that of traditional knowledge-based strategies, mechanism-type methods and empirical scoring algorithms, while BioQSAR possesses certain additional features compared to the traditional methods, such as adaptability, interpretability, deep-validation and high-efficiency. The BioQSAR scheme could be readily modified to infer the biological behavior and functions of other biomacromolecules, if their X-ray crystal structures, NMR conformation assemblies or computationally modeled structures are available.

  5. From 3D view to 3D print

    NASA Astrophysics Data System (ADS)

    Dima, M.; Farisato, G.; Bergomi, M.; Viotto, V.; Magrin, D.; Greggio, D.; Farinato, J.; Marafatto, L.; Ragazzoni, R.; Piazza, D.

    2014-08-01

    In the last few years 3D printing is getting more and more popular and used in many fields going from manufacturing to industrial design, architecture, medical support and aerospace. 3D printing is an evolution of bi-dimensional printing, which allows to obtain a solid object from a 3D model, realized with a 3D modelling software. The final product is obtained using an additive process, in which successive layers of material are laid down one over the other. A 3D printer allows to realize, in a simple way, very complex shapes, which would be quite difficult to be produced with dedicated conventional facilities. Thanks to the fact that the 3D printing is obtained superposing one layer to the others, it doesn't need any particular work flow and it is sufficient to simply draw the model and send it to print. Many different kinds of 3D printers exist based on the technology and material used for layer deposition. A common material used by the toner is ABS plastics, which is a light and rigid thermoplastic polymer, whose peculiar mechanical properties make it diffusely used in several fields, like pipes production and cars interiors manufacturing. I used this technology to create a 1:1 scale model of the telescope which is the hardware core of the space small mission CHEOPS (CHaracterising ExOPlanets Satellite) by ESA, which aims to characterize EXOplanets via transits observations. The telescope has a Ritchey-Chrétien configuration with a 30cm aperture and the launch is foreseen in 2017. In this paper, I present the different phases for the realization of such a model, focusing onto pros and cons of this kind of technology. For example, because of the finite printable volume (10×10×12 inches in the x, y and z directions respectively), it has been necessary to split the largest parts of the instrument in smaller components to be then reassembled and post-processed. A further issue is the resolution of the printed material, which is expressed in terms of layers

  6. Pharmacophore-based discovery of ligands for drug transporters

    PubMed Central

    Chang, Cheng; Ekins, Sean; Bahadduri, Praveen; Swaan, Peter W.

    2006-01-01

    The ability to identify ligands for drug transporters is an important step in drug discovery and development. It can both improve accurate profiling of lead pharmacokinetic properties and assist in the discovery of new chemical entities targeting transporters. In silico approaches, especially pharmacophore-based database screening methods have great potential in improving the throughput of current transporter ligand identification assays, leading to a higher hit rate by focusing in vitro testing to the most promising hits. In this review, the potential of different in silico methods in transporter ligand identification studies are compared and summarized with an emphasis on pharmacophore modeling. Various implementations of pharmacophore model generation, database compilation and flexible screening algorithms are also introduced. Recent successful utilization of database searching with pharmacophores to identify novel ligands for the pharmaceutically significant transporters hPepT1, P-gp, BCRP, MRP1 and DAT are reviewed and challenges encountered with current approaches are discussed. PMID:17097188

  7. Virtual screening for SARS-CoV protease based on KZ7088 pharmacophore points.

    PubMed

    Sirois, Suzanne; Wei, Dong-Qing; Du, Qishi; Chou, Kuo-Chen

    2004-01-01

    Pharmacophore modeling can provide valuable insight into ligand-receptor interactions. It can also be used in 3D (dimensional) database searching for potentially finding biologically active compounds and providing new research ideas and directions for drug-discovery projects. To stimulate the structure-based drug design against SARS (severe acute respiratory syndrome), a pharmacophore search was conducted over 3.6 millions of compounds based on the atomic coordinates of the complex obtained by docking KZ7088 (a derivative of AG7088) to SARS CoV M(pro) (coronavirus main proteinase), as reportedly recently (Chou, K. C.; Wei, D. Q.; Zhong, W. Z. Biochem. Biophys. Res. Commun. 2003, 308, 148-151). It has been found that, of the 3.6 millions of compounds screened, 0.07% are with the score satisfying five of the six pharmacophore points. Moreover, each of the hit compounds has been evaluated for druggability according to 13 metrics based on physical, chemical, and structural properties. Of the 0.07% compounds thus retrieved, 17% have a perfect score of 1.0; while 23% with one druggable rule violation, 13% two violations, and 47% more than two violations. If the criterion for druggability is set at a maximum allowance of two rule violations, we obtain that only about 0.03% of the compounds screened are worthy of further tests by experiments. These findings will significantly narrow down the search scope for potential compounds, saving substantial time and money. Finally, the featured templates derived from the current study will also be very useful for guiding the design and synthesis of effective drugs for SARS therapy.

  8. Pharmacophore development and screening for discovery of potential inhibitors of ADAMTS-4 for osteoarthritis therapy.

    PubMed

    Verma, Priyanka; Dalal, Krishna; Chopra, Madhu

    2016-08-01

    In the development of osteoarthritis, aggrecan degrades prior to cartilage destruction. Aggrecanase-1 (ADAMTS-4) is considered to be the major enzyme responsible for cleaving the Glu373-Ala374 bond in the interglobular domain of aggrecan in humans. Therefore, inhibitors of ADAMTS-4 have therapeutic potential in the treatment of osteoarthritis. In the present work, we developed a chemical feature based pharmacophore model of ADAMTS-4 inhibitors using the HipHop module within the Catalyst program package in order to elucidate the structure-activity relationship and to carry out in-silico screening. The Maybridge database was screened using Hypo1 as a 3D query, and the best-fit hits that followed Lipinski's rule of five were subsequently screened to select the compounds. The hit compounds were then docked into the active site of ADAMTS-4, and interactions were visualized to determine the potential lead molecules. After subjecting all of the hits to various screening and filtering processes, 13 compounds were finally evaluated for their in vitro inhibitory activities. This study resulted in the identification of two lead compounds with potent inhibitory effects on ADAMTS-4 activity, with IC50 values of 0.042 μM and 0.028 μM, respectively. These results provide insight into the pharmacophoric requirements for the development of more potent ADAMTS-4 inhibitors. Graphical Abstract The aggrecan-degrading metalloprotease ADAMTS-4 has been identified as a novel therapeutic target for osteoarthritis. In this work, we used HipHop-based pharmacophore modeling and virtual screening of the Maybridge database to identify novel ADAMTS-4 inhibitors. These novel lead compounds act as potent and specific inhibitors for the ADAMTS-4 enzyme and could have therapeutic potential in the treatment of OA.

  9. Chemical function based pharmacophore generation of endothelin-A selective receptor antagonists.

    PubMed

    Funk, Oliver F; Kettmann, Viktor; Drimal, Jan; Langer, Thierry

    2004-05-20

    Both quantitative and qualitative chemical function based pharmacophore models of endothelin-A (ET(A)) selective receptor antagonists were generated by using the two algorithms HypoGen and HipHop, respectively, which are implemented in the Catalyst molecular modeling software. The input for HypoGen is a training set of 18 ET(A) antagonists exhibiting IC(50) values ranging between 0.19 nM and 67 microM. The best output hypothesis consists of five features: two hydrophobic (HY), one ring aromatic (RA), one hydrogen bond acceptor (HBA), and one negative ionizable (NI) function. The highest scoring Hip Hop model consists of six features: three hydrophobic (HY), one ring aromatic (RA), one hydrogen bond acceptor (HBA), and one negative ionizable (NI). It is the result of an input of three highly active, selective, and structurally diverse ET(A) antagonists. The predictive power of the quantitative model could be approved by using a test set of 30 compounds, whose activity values spread over 6 orders of magnitude. The two pharmacophores were tested according to their ability to extract known endothelin antagonists from the 3D molecular structure database of Derwent's World Drug Index. Thereby the main part of selective ET(A) antagonistic entries was detected by the two hypotheses. Furthermore, the pharmacophores were used to screen the Maybridge database. Six compounds were chosen from the output hit lists for in vitro testing of their ability to displace endothelin-1 from its receptor. Two of these are new potential lead compounds because they are structurally novel and exhibit satisfactory activity in the binding assay.

  10. YouDash3D: exploring stereoscopic 3D gaming for 3D movie theaters

    NASA Astrophysics Data System (ADS)

    Schild, Jonas; Seele, Sven; Masuch, Maic

    2012-03-01

    Along with the success of the digitally revived stereoscopic cinema, events beyond 3D movies become attractive for movie theater operators, i.e. interactive 3D games. In this paper, we present a case that explores possible challenges and solutions for interactive 3D games to be played by a movie theater audience. We analyze the setting and showcase current issues related to lighting and interaction. Our second focus is to provide gameplay mechanics that make special use of stereoscopy, especially depth-based game design. Based on these results, we present YouDash3D, a game prototype that explores public stereoscopic gameplay in a reduced kiosk setup. It features live 3D HD video stream of a professional stereo camera rig rendered in a real-time game scene. We use the effect to place the stereoscopic effigies of players into the digital game. The game showcases how stereoscopic vision can provide for a novel depth-based game mechanic. Projected trigger zones and distributed clusters of the audience video allow for easy adaptation to larger audiences and 3D movie theater gaming.

  11. Structure-based modeling of dye-fiber affinity with SOM-4D-QSAR paradigm: application to set of anthraquinone derivatives.

    PubMed

    Bak, Andrzej; Wyszomirski, Miroslaw; Magdziarz, Tomasz; Smolinski, Adam; Polanski, Jaroslaw

    2014-01-01

    A comparative structure-affinity study of anthraquinone dyes adsorption on cellulose fibre is presented in this paper. We used receptor-dependent 4D-QSAR methods based on grid and neural (SOM) methodology coupled with IVEPLS procedure. The applied RD 4D-QSAR approach focuses mainly on the ability of mapping dye properties to verify the concept of tinctophore in dye chemistry. Moreover, the stochastic SMV procedure to investigate the predictive ability of the method for a large population of 4D-QSAR models was employed. The obtained findings were compared with the previously published RI 3D/4D-QSAR models for the corresponding anthraquinone trainings sets. The neutral (protonated) and anionic (deprotonated) forms of anthraquinone scaffold were examined in order to deal with the uncertainty of the dye ionization state. The results are comparable to both the neutral and anionic dye sets regardless of the occupancy and charge descriptors applied, respectively. It is worth noting that the SOM-4D-QSAR behaves comparably to the cubic counterpart which is observed in each training/test subset specification (4D-QSAR-Jo vs SOM- 4D-QSARo and 4D-QSAR-Jq vs SOM-4D-QSARq). Additionally, an attempt was made to specify a common set of variables contributing significantly to dye-fiber binding affinity; it was simultaneously performed for some arbitrary chosen SMV models. The presented RD 4D-QSAR methodology together with IVE-PLS procedure provides a robust and predictive modeling technique, which facilitates detailed specification of the molecular motifs significantly contributing to the fiber-dye affinity.

  12. Speaking Volumes About 3-D

    NASA Technical Reports Server (NTRS)

    2002-01-01

    In 1999, Genex submitted a proposal to Stennis Space Center for a volumetric 3-D display technique that would provide multiple users with a 360-degree perspective to simultaneously view and analyze 3-D data. The futuristic capabilities of the VolumeViewer(R) have offered tremendous benefits to commercial users in the fields of medicine and surgery, air traffic control, pilot training and education, computer-aided design/computer-aided manufacturing, and military/battlefield management. The technology has also helped NASA to better analyze and assess the various data collected by its satellite and spacecraft sensors. Genex capitalized on its success with Stennis by introducing two separate products to the commercial market that incorporate key elements of the 3-D display technology designed under an SBIR contract. The company Rainbow 3D(R) imaging camera is a novel, three-dimensional surface profile measurement system that can obtain a full-frame 3-D image in less than 1 second. The third product is the 360-degree OmniEye(R) video system. Ideal for intrusion detection, surveillance, and situation management, this unique camera system offers a continuous, panoramic view of a scene in real time.

  13. Dual-pharmacophore DNA-encoded chemical libraries.

    PubMed

    Scheuermann, Jörg; Neri, Dario

    2015-06-01

    In contrast to single-pharmacophore DNA-encoded libraries, where only one chemical moiety is linked to DNA, dual-pharmacophore DNA-encoded chemical libraries feature the display of two independent small-molecules in close proximity. This, in principle, allows to explore adjacent epitopes on a pharmaceutical target of choice and hence the discovery of simultaneously binding pairs of fragments, by virtue of the chelate effect.

  14. QNA-based 'Star Track' QSAR approach.

    PubMed

    Filimonov, D A; Zakharov, A V; Lagunin, A A; Poroikov, V V

    2009-10-01

    In the existing quantitative structure-activity relationship (QSAR) methods any molecule is represented as a single point in a many-dimensional space of molecular descriptors. We propose a new QSAR approach based on Quantitative Neighbourhoods of Atoms (QNA) descriptors, which characterize each atom of a molecule and depend on the whole molecule structure. In the 'Star Track' methodology any molecule is represented as a set of points in a two-dimensional space of QNA descriptors. With our new method the estimate of the target property of a chemical compound is calculated as the average value of the function of QNA descriptors in the points of the atoms of a molecule in QNA descriptor space. Substantially, we propose the use of only two descriptors rather than more than 3000 molecular descriptors that apply in the QSAR method. On the basis of this approach we have developed the computer program GUSAR and compared it with several widely used QSAR methods including CoMFA, CoMSIA, Golpe/GRID, HQSAR and others, using ten data sets representing various chemical series and diverse types of biological activity. We show that in the majority of cases the accuracy and predictivity of GUSAR models appears to be better than those for the reference QSAR methods. High predictive ability and robustness of GUSAR are also shown in the leave-20%-out cross-validation procedure.

  15. A hybrid approach for addressing ring flexibility in 3D database searching.

    PubMed

    Sadowski, J

    1997-01-01

    A hybrid approach for flexible 3D database searching is presented that addresses the problem of ring flexibility. It combines the explicit storage of up to 25 multiple conformations of rings, with up to eight atoms, generated by the 3D structure generator CORINA with the power of a torsional fitting technique implemented in the 3D database system UNITY. A comparison with the original UNITY approach, using a database with about 130,000 entries and five different pharmacophore queries, was performed. The hybrid approach scored, on an average, 10-20% more hits than the reference run. Moreover, specific problems with unrealistic hit geometries produced by the original approach can be excluded. In addition, the influence of the maximum number of ring conformations per molecule was investigated. An optimal number of 10 conformations per molecule is recommended.

  16. Developing a Dynamic Pharmacophore Model for HIV-1 Integrase

    SciTech Connect

    Carlson, Heather A.; Masukawa, Keven M.; Rubins, Kathleen; Bushman, Frederic; Jorgensen, William L.; Lins, Roberto; Briggs, James; Mccammon, Andy

    2000-05-11

    We present the first receptor-based pharmacophore model for HIV-1 integrase. The development of ''dynamic'' pharmacophore models is a new method that accounts for the inherent flexibility of the active site and aims to reduce the entropic penalties associated with binding a ligand. Furthermore, this new drug discovery method overcomes the limitation of an incomplete crystal structure of the target protein. A molecular dynamics (MD) simulation describes the flexibility of the uncomplexed protein. Many conformational models of the protein are saved from the MD simulations and used in a series of multi-unit search for interacting conformers (MUSIC) simulations. MUSIC is a multiple-copy minimization method, available in the BOSS program; it is used to determine binding regions for probe molecules containing functional groups that complement the active site. All protein conformations from the MD are overlaid, and conserved binding regions for the probe molecules are identified. Those conserved binding regions define the dynamic pharmacophore model. Here, the dynamic model is compared to known inhibitors of the integrase as well as a three-point, ligand-based pharmacophore model from the literature. Also, a ''static'' pharmacophore model was determined in the standard fashion, using a single crystal structure. Inhibitors thought to bind in the active site of HIV-1 integrase fit the dynamic model but not the static model. Finally, we have identified a set of compounds from the Available Chemicals Directory that fit the dynamic pharmacophore model, and experimental testing of the compounds has confirmed several new inhibitors.

  17. Macrophage podosomes go 3D.

    PubMed

    Van Goethem, Emeline; Guiet, Romain; Balor, Stéphanie; Charrière, Guillaume M; Poincloux, Renaud; Labrousse, Arnaud; Maridonneau-Parini, Isabelle; Le Cabec, Véronique

    2011-01-01

    Macrophage tissue infiltration is a critical step in the immune response against microorganisms and is also associated with disease progression in chronic inflammation and cancer. Macrophages are constitutively equipped with specialized structures called podosomes dedicated to extracellular matrix (ECM) degradation. We recently reported that these structures play a critical role in trans-matrix mesenchymal migration mode, a protease-dependent mechanism. Podosome molecular components and their ECM-degrading activity have been extensively studied in two dimensions (2D), but yet very little is known about their fate in three-dimensional (3D) environments. Therefore, localization of podosome markers and proteolytic activity were carefully examined in human macrophages performing mesenchymal migration. Using our gelled collagen I 3D matrix model to obligate human macrophages to perform mesenchymal migration, classical podosome markers including talin, paxillin, vinculin, gelsolin, cortactin were found to accumulate at the tip of F-actin-rich cell protrusions together with β1 integrin and CD44 but not β2 integrin. Macrophage proteolytic activity was observed at podosome-like protrusion sites using confocal fluorescence microscopy and electron microscopy. The formation of migration tunnels by macrophages inside the matrix was accomplished by degradation, engulfment and mechanic compaction of the matrix. In addition, videomicroscopy revealed that 3D F-actin-rich protrusions of migrating macrophages were as dynamic as their 2D counterparts. Overall, the specifications of 3D podosomes resembled those of 2D podosome rosettes rather than those of individual podosomes. This observation was further supported by the aspect of 3D podosomes in fibroblasts expressing Hck, a master regulator of podosome rosettes in macrophages. In conclusion, human macrophage podosomes go 3D and take the shape of spherical podosome rosettes when the cells perform mesenchymal migration. This work

  18. 3D Printed Bionic Nanodevices.

    PubMed

    Kong, Yong Lin; Gupta, Maneesh K; Johnson, Blake N; McAlpine, Michael C

    2016-06-01

    The ability to three-dimensionally interweave biological and functional materials could enable the creation of bionic devices possessing unique and compelling geometries, properties, and functionalities. Indeed, interfacing high performance active devices with biology could impact a variety of fields, including regenerative bioelectronic medicines, smart prosthetics, medical robotics, and human-machine interfaces. Biology, from the molecular scale of DNA and proteins, to the macroscopic scale of tissues and organs, is three-dimensional, often soft and stretchable, and temperature sensitive. This renders most biological platforms incompatible with the fabrication and materials processing methods that have been developed and optimized for functional electronics, which are typically planar, rigid and brittle. A number of strategies have been developed to overcome these dichotomies. One particularly novel approach is the use of extrusion-based multi-material 3D printing, which is an additive manufacturing technology that offers a freeform fabrication strategy. This approach addresses the dichotomies presented above by (1) using 3D printing and imaging for customized, hierarchical, and interwoven device architectures; (2) employing nanotechnology as an enabling route for introducing high performance materials, with the potential for exhibiting properties not found in the bulk; and (3) 3D printing a range of soft and nanoscale materials to enable the integration of a diverse palette of high quality functional nanomaterials with biology. Further, 3D printing is a multi-scale platform, allowing for the incorporation of functional nanoscale inks, the printing of microscale features, and ultimately the creation of macroscale devices. This blending of 3D printing, novel nanomaterial properties, and 'living' platforms may enable next-generation bionic systems. In this review, we highlight this synergistic integration of the unique properties of nanomaterials with the

  19. Petal, terrain & airbags - 3D

    NASA Technical Reports Server (NTRS)

    1997-01-01

    Portions of the lander's deflated airbags and a petal are at the lower area of this image, taken in stereo by the Imager for Mars Pathfinder (IMP) on Sol 3. 3D glasses are necessary to identify surface detail. The metallic object at lower right is part of the lander's low-gain antenna. This image is part of a 3D 'monster

    Click below to see the left and right views individually. [figure removed for brevity, see original site] Left [figure removed for brevity, see original site] Right

  20. 3D Computations and Experiments

    SciTech Connect

    Couch, R; Faux, D; Goto, D; Nikkel, D

    2004-04-05

    This project consists of two activities. Task A, Simulations and Measurements, combines all the material model development and associated numerical work with the materials-oriented experimental activities. The goal of this effort is to provide an improved understanding of dynamic material properties and to provide accurate numerical representations of those properties for use in analysis codes. Task B, ALE3D Development, involves general development activities in the ALE3D code with the focus of improving simulation capabilities for problems of mutual interest to DoD and DOE. Emphasis is on problems involving multi-phase flow, blast loading of structures and system safety/vulnerability studies.

  1. Pharmacophore screening of the protein data bank for specific binding site chemistry.

    PubMed

    Campagna-Slater, Valérie; Arrowsmith, Andrew G; Zhao, Yong; Schapira, Matthieu

    2010-03-22

    A simple computational approach was developed to screen the Protein Data Bank (PDB) for putative pockets possessing a specific binding site chemistry and geometry. The method employs two commonly used 3D screening technologies, namely identification of cavities in protein structures and pharmacophore screening of chemical libraries. For each protein structure, a pocket finding algorithm is used to extract potential binding sites containing the correct types of residues, which are then stored in a large SDF-formatted virtual library; pharmacophore filters describing the desired binding site chemistry and geometry are then applied to screen this virtual library and identify pockets matching the specified structural chemistry. As an example, this approach was used to screen all human protein structures in the PDB and identify sites having chemistry similar to that of known methyl-lysine binding domains that recognize chromatin methylation marks. The selected genes include known readers of the histone code as well as novel binding pockets that may be involved in epigenetic signaling. Putative allosteric sites were identified on the structures of TP53BP1, L3MBTL3, CHEK1, KDM4A, and CREBBP.

  2. EDULISS: a small-molecule database with data-mining and pharmacophore searching capabilities

    PubMed Central

    Hsin, Kun-Yi; Morgan, Hugh P.; Shave, Steven R.; Hinton, Andrew C.; Taylor, Paul; Walkinshaw, Malcolm D.

    2011-01-01

    We present the relational database EDULISS (EDinburgh University Ligand Selection System), which stores structural, physicochemical and pharmacophoric properties of small molecules. The database comprises a collection of over 4 million commercially available compounds from 28 different suppliers. A user-friendly web-based interface for EDULISS (available at http://eduliss.bch.ed.ac.uk/) has been established providing a number of data-mining possibilities. For each compound a single 3D conformer is stored along with over 1600 calculated descriptor values (molecular properties). A very efficient method for unique compound recognition, especially for a large scale database, is demonstrated by making use of small subgroups of the descriptors. Many of the shape and distance descriptors are held as pre-calculated bit strings permitting fast and efficient similarity and pharmacophore searches which can be used to identify families of related compounds for biological testing. Two ligand searching applications are given to demonstrate how EDULISS can be used to extract families of molecules with selected structural and biophysical features. PMID:21051336

  3. The World of 3-D.

    ERIC Educational Resources Information Center

    Mayshark, Robin K.

    1991-01-01

    Students explore three-dimensional properties by creating red and green wall decorations related to Christmas. Students examine why images seem to vibrate when red and green pieces are small and close together. Instructions to conduct the activity and construct 3-D glasses are given. (MDH)

  4. 3D Printing: Exploring Capabilities

    ERIC Educational Resources Information Center

    Samuels, Kyle; Flowers, Jim

    2015-01-01

    As 3D printers become more affordable, schools are using them in increasing numbers. They fit well with the emphasis on product design in technology and engineering education, allowing students to create high-fidelity physical models to see and test different iterations in their product designs. They may also help students to "think in three…

  5. SNL3dFace

    SciTech Connect

    Russ, Trina; Koch, Mark; Koudelka, Melissa; Peters, Ralph; Little, Charles; Boehnen, Chris; Peters, Tanya

    2007-07-20

    This software distribution contains MATLAB and C++ code to enable identity verification using 3D images that may or may not contain a texture component. The code is organized to support system performance testing and system capability demonstration through the proper configuration of the available user interface. Using specific algorithm parameters the face recognition system has been demonstrated to achieve a 96.6% verification rate (Pd) at 0.001 false alarm rate. The system computes robust facial features of a 3D normalized face using Principal Component Analysis (PCA) and Fisher Linear Discriminant Analysis (FLDA). A 3D normalized face is obtained by alighning each face, represented by a set of XYZ coordinated, to a scaled reference face using the Iterative Closest Point (ICP) algorithm. The scaled reference face is then deformed to the input face using an iterative framework with parameters that control the deformed surface regulation an rate of deformation. A variety of options are available to control the information that is encoded by the PCA. Such options include the XYZ coordinates, the difference of each XYZ coordinates from the reference, the Z coordinate, the intensity/texture values, etc. In addition to PCA/FLDA feature projection this software supports feature matching to obtain similarity matrices for performance analysis. In addition, this software supports visualization of the STL, MRD, 2D normalized, and PCA synthetic representations in a 3D environment.

  6. Making Inexpensive 3-D Models

    ERIC Educational Resources Information Center

    Manos, Harry

    2016-01-01

    Visual aids are important to student learning, and they help make the teacher's job easier. Keeping with the "TPT" theme of "The Art, Craft, and Science of Physics Teaching," the purpose of this article is to show how teachers, lacking equipment and funds, can construct a durable 3-D model reference frame and a model gravity…

  7. TACO3D. 3-D Finite Element Heat Transfer Code

    SciTech Connect

    Mason, W.E.

    1992-03-04

    TACO3D is a three-dimensional, finite-element program for heat transfer analysis. An extension of the two-dimensional TACO program, it can perform linear and nonlinear analyses and can be used to solve either transient or steady-state problems. The program accepts time-dependent or temperature-dependent material properties, and materials may be isotropic or orthotropic. A variety of time-dependent and temperature-dependent boundary conditions and loadings are available including temperature, flux, convection, and radiation boundary conditions and internal heat generation. Additional specialized features treat enclosure radiation, bulk nodes, and master/slave internal surface conditions (e.g., contact resistance). Data input via a free-field format is provided. A user subprogram feature allows for any type of functional representation of any independent variable. A profile (bandwidth) minimization option is available. The code is limited to implicit time integration for transient solutions. TACO3D has no general mesh generation capability. Rows of evenly-spaced nodes and rows of sequential elements may be generated, but the program relies on separate mesh generators for complex zoning. TACO3D does not have the ability to calculate view factors internally. Graphical representation of data in the form of time history and spatial plots is provided through links to the POSTACO and GRAPE postprocessor codes.

  8. Molecular dynamics simulation study of PTP1B with allosteric inhibitor and its application in receptor based pharmacophore modeling

    NASA Astrophysics Data System (ADS)

    Bharatham, Kavitha; Bharatham, Nagakumar; Kwon, Yong Jung; Lee, Keun Woo

    2008-12-01

    Allosteric inhibition of protein tyrosine phosphatase 1B (PTP1B), has paved a new path to design specific inhibitors for PTP1B, which is an important drug target for the treatment of type II diabetes and obesity. The PTP1B1-282-allosteric inhibitor complex crystal structure lacks α7 (287-298) and moreover there is no available 3D structure of PTP1B1-298 in open form. As the interaction between α7 and α6-α3 helices plays a crucial role in allosteric inhibition, α7 was modeled to the PTP1B1-282 in open form complexed with an allosteric inhibitor (compound-2) and a 5 ns MD simulation was performed to investigate the relative orientation of the α7-α6-α3 helices. The simulation conformational space was statistically sampled by clustering analyses. This approach was helpful to reveal certain clues on PTP1B allosteric inhibition. The simulation was also utilized in the generation of receptor based pharmacophore models to include the conformational flexibility of the protein-inhibitor complex. Three cluster representative structures of the highly populated clusters were selected for pharmacophore model generation. The three pharmacophore models were subsequently utilized for screening databases to retrieve molecules containing the features that complement the allosteric site. The retrieved hits were filtered based on certain drug-like properties and molecular docking simulations were performed in two different conformations of protein. Thus, performing MD simulation with α7 to investigate the changes at the allosteric site, then developing receptor based pharmacophore models and finally docking the retrieved hits into two distinct conformations will be a reliable methodology in identifying PTP1B allosteric inhibitors.

  9. Pharmacophore-based database mining for probing fragmental drug-likeness of diketo acid analogues.

    PubMed

    Bak, A; Magdziarz, T; Polanski, J

    2012-01-01

    A number of the structurally diverse chemical compounds with functional diketo acid (DKA) subunit(s) have been revealed by combined online and MoStBiodat 3D pharmacophore-guided ZINC and PubChem database screening. We used the structural data available from such screening to analyse the similarities of the compounds containing the DKA fragment. Generally, the analysis by principal component analysis and self-organizing neural network approaches reveals four families of compounds complying with the chemical constitution (aromatic, aliphatic) of the compounds. From a practical point of view, similar studies may reveal potential bioisosteres of known drugs, e.g. raltegravir/elvitegravir. In this context, it seems that mono-halogenated aryl substructures with para group show the closest similarity to these compounds, in contrast to structures where the aromatic ring is halogenated in both ortho- and para-locations.

  10. Forensic 3D scene reconstruction

    NASA Astrophysics Data System (ADS)

    Little, Charles Q.; Small, Daniel E.; Peters, Ralph R.; Rigdon, J. B.

    2000-05-01

    Traditionally law enforcement agencies have relied on basic measurement and imaging tools, such as tape measures and cameras, in recording a crime scene. A disadvantage of these methods is that they are slow and cumbersome. The development of a portable system that can rapidly record a crime scene with current camera imaging, 3D geometric surface maps, and contribute quantitative measurements such as accurate relative positioning of crime scene objects, would be an asset to law enforcement agents in collecting and recording significant forensic data. The purpose of this project is to develop a fieldable prototype of a fast, accurate, 3D measurement and imaging system that would support law enforcement agents to quickly document and accurately record a crime scene.

  11. 3D Printed Robotic Hand

    NASA Technical Reports Server (NTRS)

    Pizarro, Yaritzmar Rosario; Schuler, Jason M.; Lippitt, Thomas C.

    2013-01-01

    Dexterous robotic hands are changing the way robots and humans interact and use common tools. Unfortunately, the complexity of the joints and actuations drive up the manufacturing cost. Some cutting edge and commercially available rapid prototyping machines now have the ability to print multiple materials and even combine these materials in the same job. A 3D model of a robotic hand was designed using Creo Parametric 2.0. Combining "hard" and "soft" materials, the model was printed on the Object Connex350 3D printer with the purpose of resembling as much as possible the human appearance and mobility of a real hand while needing no assembly. After printing the prototype, strings where installed as actuators to test mobility. Based on printing materials, the manufacturing cost of the hand was $167, significantly lower than other robotic hands without the actuators since they have more complex assembly processes.

  12. Comparing swimsuits in 3D.

    PubMed

    van Geer, Erik; Molenbroek, Johan; Schreven, Sander; deVoogd-Claessen, Lenneke; Toussaint, Huib

    2012-01-01

    In competitive swimming, suits have become more important. These suits influence friction, pressure and wave drag. Friction drag is related to the surface properties whereas both pressure and wave drag are greatly influenced by body shape. To find a relationship between the body shape and the drag, the anthropometry of several world class female swimmers wearing different suits was accurately defined using a 3D scanner and traditional measuring methods. The 3D scans delivered more detailed information about the body shape. On the same day the swimmers did performance tests in the water with the tested suits. Afterwards the result of the performance tests and the differences found in body shape was analyzed to determine the deformation caused by a swimsuit and its effect on the swimming performance. Although the amount of data is limited because of the few test subjects, there is an indication that the deformation of the body influences the swimming performance.

  13. Forensic 3D Scene Reconstruction

    SciTech Connect

    LITTLE,CHARLES Q.; PETERS,RALPH R.; RIGDON,J. BRIAN; SMALL,DANIEL E.

    1999-10-12

    Traditionally law enforcement agencies have relied on basic measurement and imaging tools, such as tape measures and cameras, in recording a crime scene. A disadvantage of these methods is that they are slow and cumbersome. The development of a portable system that can rapidly record a crime scene with current camera imaging, 3D geometric surface maps, and contribute quantitative measurements such as accurate relative positioning of crime scene objects, would be an asset to law enforcement agents in collecting and recording significant forensic data. The purpose of this project is to develop a feasible prototype of a fast, accurate, 3D measurement and imaging system that would support law enforcement agents to quickly document and accurately record a crime scene.

  14. 3D-graphite structure

    SciTech Connect

    Belenkov, E. A. Ali-Pasha, V. A.

    2011-01-15

    The structure of clusters of some new carbon 3D-graphite phases have been calculated using the molecular-mechanics methods. It is established that 3D-graphite polytypes {alpha}{sub 1,1}, {alpha}{sub 1,3}, {alpha}{sub 1,5}, {alpha}{sub 2,1}, {alpha}{sub 2,3}, {alpha}{sub 3,1}, {beta}{sub 1,2}, {beta}{sub 1,4}, {beta}{sub 1,6}, {beta}{sub 2,1}, and {beta}{sub 3,2} consist of sp{sup 2}-hybridized atoms, have hexagonal unit cells, and differ in regards to the structure of layers and order of their alternation. A possible way to experimentally synthesize new carbon phases is proposed: the polymerization and carbonization of hydrocarbon molecules.

  15. Novel butyrylcholinesterase inhibitors through pharmacophore modeling, virtual screening and DFT-based approaches along-with design of bioisosterism-based analogues.

    PubMed

    Gogoi, Dhrubajyoti; Chaliha, Amrita Kashyap; Sarma, Diganta; Kakoti, Bibhuti Bhusan; Buragohain, Alak Kumar

    2017-01-01

    Ligand and structure-based pharmacophore models were used to identify the important chemical features of butyrylcholinesterase (BChE) inhibitors. A training set of 16 known structurally diverse compounds with a wide range of inhibitory activity against BChE was used to develop a quantitative ligand-based pharmacophore (Hypo1) model to identify novel BChE inhibitors in virtual screening databases. A structure-based pharmacophore hypothesis (Phar1) was also developed with the ligand-binding site of BChE in consideration. Further, the models were validated using test set, Fisher's Randomization and Leave-one-out validation methods. Well-validated pharmacophore hypotheses were further used as 3D queries in virtual screening and 430 compounds were finally selected for molecular docking analysis. Subsequently, ADMET, DFT and chemical similarity search were employed to narrow down on seven compounds as potential drug candidates. Analogues of the best hit were further developed through a bioisosterism-guided approach to further generate a library of potential BChE inhibitors.

  16. Generation of the first structure-based pharmacophore model containing a selective "zinc binding group" feature to identify potential glyoxalase-1 inhibitors.

    PubMed

    Al-Balas, Qosay; Hassan, Mohammad; Al-Oudat, Buthina; Alzoubi, Hassan; Mhaidat, Nizar; Almaaytah, Ammar

    2012-11-22

    Within this study, a unique 3D structure-based pharmacophore model of the enzyme glyoxalase-1 (Glo-1) has been revealed. Glo-1 is considered a zinc metalloenzyme in which the inhibitor binding with zinc atom at the active site is crucial. To our knowledge, this is the first pharmacophore model that has a selective feature for a "zinc binding group" which has been customized within the structure-based pharmacophore model of Glo-1 to extract ligands that possess functional groups able to bind zinc atom solely from database screening. In addition, an extensive 2D similarity search using three diverse similarity techniques (Tanimoto, Dice, Cosine) has been performed over the commercially available "Zinc Clean Drug-Like Database" that contains around 10 million compounds to help find suitable inhibitors for this enzyme based on known inhibitors from the literature. The resultant hits were mapped over the structure based pharmacophore and the successful hits were further docked using three docking programs with different pose fitting and scoring techniques (GOLD, LibDock, CDOCKER). Nine candidates were suggested to be novel Glo-1 inhibitors containing the "zinc binding group" with the highest consensus scoring from docking.

  17. New set of 2D/3D thermodynamic indices for proteins. A formalism based on “ Molten Globule” theory

    NASA Astrophysics Data System (ADS)

    Ruiz-Blanco Yasser, B.; García, Y.; Sotomayor-Torres, C. M.; Yovani, Marrero-Ponce

    We define eight new macromolecular indices, and several related descriptors for proteins. The coarse grained methodology used for its deduction ensures its fast execution and becomes a powerful potential tool to explore large databases of protein structures. The indices are intended for stability studies, predicting Φ-values, predicting folding rate constants, protein QSAR/QSPR as well as protein alignment studies. Also, these indices could be used as scoring function in protein-protein docking or 3D protein structure prediction algorithms and any others applications which need a numerical code for proteins and/or residues from 2D or 3D format.

  18. Is conformation a fundamental descriptor in QSAR? A case for halogenated anesthetics

    PubMed Central

    Guimarães, Maria C; Duarte, Mariene H; Silla, Josué M

    2016-01-01

    Summary An intriguing question in 3D-QSAR lies on which conformation(s) to use when generating molecular descriptors (MD) for correlation with bioactivity values. This is not a simple task because the bioactive conformation in molecule data sets is usually unknown and, therefore, optimized structures in a receptor-free environment are often used to generate the MD´s. In this case, a wrong conformational choice can cause misinterpretation of the QSAR model. The present computational work reports the conformational analysis of the volatile anesthetic isoflurane (2-chloro-2-(difluoromethoxy)-1,1,1-trifluoroethane) in the gas phase and also in polar and nonpolar implicit and explicit solvents to show that stable minima (ruled by intramolecular interactions) do not necessarily coincide with the bioconformation (ruled by enzyme induced fit). Consequently, a QSAR model based on two-dimensional chemical structures was built and exhibited satisfactory modeling/prediction capability and interpretability, then suggesting that these 2D MD´s can be advantageous over some three-dimensional descriptors. PMID:27340468

  19. [Real time 3D echocardiography

    NASA Technical Reports Server (NTRS)

    Bauer, F.; Shiota, T.; Thomas, J. D.

    2001-01-01

    Three-dimensional representation of the heart is an old concern. Usually, 3D reconstruction of the cardiac mass is made by successive acquisition of 2D sections, the spatial localisation and orientation of which require complex guiding systems. More recently, the concept of volumetric acquisition has been introduced. A matricial emitter-receiver probe complex with parallel data processing provides instantaneous of a pyramidal 64 degrees x 64 degrees volume. The image is restituted in real time and is composed of 3 planes (planes B and C) which can be displaced in all spatial directions at any time during acquisition. The flexibility of this system of acquisition allows volume and mass measurement with greater accuracy and reproducibility, limiting inter-observer variability. Free navigation of the planes of investigation allows reconstruction for qualitative and quantitative analysis of valvular heart disease and other pathologies. Although real time 3D echocardiography is ready for clinical usage, some improvements are still necessary to improve its conviviality. Then real time 3D echocardiography could be the essential tool for understanding, diagnosis and management of patients.

  20. GPU-Accelerated Denoising in 3D (GD3D)

    SciTech Connect

    2013-10-01

    The raw computational power GPU Accelerators enables fast denoising of 3D MR images using bilateral filtering, anisotropic diffusion, and non-local means. This software addresses two facets of this promising application: what tuning is necessary to achieve optimal performance on a modern GPU? And what parameters yield the best denoising results in practice? To answer the first question, the software performs an autotuning step to empirically determine optimal memory blocking on the GPU. To answer the second, it performs a sweep of algorithm parameters to determine the combination that best reduces the mean squared error relative to a noiseless reference image.

  1. PharmDock: a pharmacophore-based docking program

    PubMed Central

    2014-01-01

    Background Protein-based pharmacophore models are enriched with the information of potential interactions between ligands and the protein target. We have shown in a previous study that protein-based pharmacophore models can be applied for ligand pose prediction and pose ranking. In this publication, we present a new pharmacophore-based docking program PharmDock that combines pose sampling and ranking based on optimized protein-based pharmacophore models with local optimization using an empirical scoring function. Results Tests of PharmDock on ligand pose prediction, binding affinity estimation, compound ranking and virtual screening yielded comparable or better performance to existing and widely used docking programs. The docking program comes with an easy-to-use GUI within PyMOL. Two features have been incorporated in the program suite that allow for user-defined guidance of the docking process based on previous experimental data. Docking with those features demonstrated superior performance compared to unbiased docking. Conclusion A protein pharmacophore-based docking program, PharmDock, has been made available with a PyMOL plugin. PharmDock and the PyMOL plugin are freely available from http://people.pharmacy.purdue.edu/~mlill/software/pharmdock. PMID:24739488

  2. CURRENT PRACTICES IN QSAR DEVELOPMENT AND APPLICATIONS

    EPA Science Inventory

    Current Practices in QSAR Development and Applications

    Although it is commonly assumed that the structure and properties of a single chemical determines its activity in a particular biological system, it is only through study of how biological activity varies with changes...

  3. Virtual Screening and Molecular Design Based on Hierarchical Qsar Technology

    NASA Astrophysics Data System (ADS)

    Kuz'min, Victor E.; Artemenko, A. G.; Muratov, Eugene N.; Polischuk, P. G.; Ognichenko, L. N.; Liahovsky, A. V.; Hromov, A. I.; Varlamova, E. V.

    This chapter is devoted to the hierarchical QSAR technology (HiT QSAR) based on simplex representation of molecular structure (SiRMS) and its application to different QSAR/QSPR tasks. The essence of this technology is a sequential solution (with the use of the information obtained on the previous steps) of the QSAR paradigm by a series of enhanced models based on molecular structure description (in a specific order from 1D to 4D). Actually, it's a system of permanently improved solutions. Different approaches for domain applicability estimation are implemented in HiT QSAR. In the SiRMS approach every molecule is represented as a system of different simplexes (tetratomic fragments with fixed composition, structure, chirality, and symmetry). The level of simplex descriptors detailed increases consecutively from the 1D to 4D representation of the molecular structure. The advantages of the approach presented are an ability to solve QSAR/QSPR tasks for mixtures of compounds, the absence of the "molecular alignment" problem, consideration of different physical-chemical properties of atoms (e.g., charge, lipophilicity), and the high adequacy and good interpretability of obtained models and clear ways for molecular design. The efficiency of HiT QSAR was demonstrated by its comparison with the most popular modern QSAR approaches on two representative examination sets. The examples of successful application of the HiT QSAR for various QSAR/QSPR investigations on the different levels (1D-4D) of the molecular structure description are also highlighted. The reliability of developed QSAR models as the predictive virtual screening tools and their ability to serve as the basis of directed drug design was validated by subsequent synthetic, biological, etc. experiments. The HiT QSAR is realized as the suite of computer programs termed the "HiT QSAR" software that so includes powerful statistical capabilities and a number of useful utilities.

  4. Molecular docking and QSAR analyses for understanding the antimalarial activity of some 7-substituted-4-aminoquinoline derivatives.

    PubMed

    Shibi, I G; Aswathy, L; Jisha, R S; Masand, V H; Divyachandran, A; Gajbhiye, J M

    2015-09-18

    The quinoline moiety is one of the widely studied scaffolds for generating derivatives with various pharmacophoric groups due to its potential antimalarial activities. In the present study, a series of 7-substituted-4-aminoquinoline derivatives were selected to understand their antimalarial properties computationally by molecular modeling techniques including 2D QSAR, comparative molecular field analysis (CoMFA), comparative molecular similarity indices analysis (CoMSIA) and molecular docking. The 2D-QSAR model built with four descriptors selected by genetic algorithm technique and CoMFA model showed satisfactory statistical results (Q(2)=0.540, R(2)ncv=0.881, F value=157.09). A reliable CoMSIA model out of the fourteen different combinations has a Q(2) value of 0.638. The molecular docking studies of the compounds for 1CET as the protein target revealed that ten compounds showed maximum interactions with the binding site of the protein. The present study highlights the unique binding signatures of the ligands within the active site groove of the target and it explains the subtle differences in their EC50 values and their mechanism of inhibition.

  5. Magmatic Systems in 3-D

    NASA Astrophysics Data System (ADS)

    Kent, G. M.; Harding, A. J.; Babcock, J. M.; Orcutt, J. A.; Bazin, S.; Singh, S.; Detrick, R. S.; Canales, J. P.; Carbotte, S. M.; Diebold, J.

    2002-12-01

    Multichannel seismic (MCS) images of crustal magma chambers are ideal targets for advanced visualization techniques. In the mid-ocean ridge environment, reflections originating at the melt-lens are well separated from other reflection boundaries, such as the seafloor, layer 2A and Moho, which enables the effective use of transparency filters. 3-D visualization of seismic reflectivity falls into two broad categories: volume and surface rendering. Volumetric-based visualization is an extremely powerful approach for the rapid exploration of very dense 3-D datasets. These 3-D datasets are divided into volume elements or voxels, which are individually color coded depending on the assigned datum value; the user can define an opacity filter to reject plotting certain voxels. This transparency allows the user to peer into the data volume, enabling an easy identification of patterns or relationships that might have geologic merit. Multiple image volumes can be co-registered to look at correlations between two different data types (e.g., amplitude variation with offsets studies), in a manner analogous to draping attributes onto a surface. In contrast, surface visualization of seismic reflectivity usually involves producing "fence" diagrams of 2-D seismic profiles that are complemented with seafloor topography, along with point class data, draped lines and vectors (e.g. fault scarps, earthquake locations and plate-motions). The overlying seafloor can be made partially transparent or see-through, enabling 3-D correlations between seafloor structure and seismic reflectivity. Exploration of 3-D datasets requires additional thought when constructing and manipulating these complex objects. As numbers of visual objects grow in a particular scene, there is a tendency to mask overlapping objects; this clutter can be managed through the effective use of total or partial transparency (i.e., alpha-channel). In this way, the co-variation between different datasets can be investigated

  6. Generated 3D-common feature hypotheses using the HipHop method for developing new topoisomerase I inhibitors.

    PubMed

    Ataei, Sanaz; Yilmaz, Serap; Ertan-Bolelli, Tugba; Yildiz, Ilkay

    2015-07-01

    The continued interest in designing novel topoisomerase I (Topo I) inhibitors and the lack of adequate ligand-based computer-aided drug discovery efforts combined with the drawbacks of structure-based design prompted us to explore the possibility of developing ligand-based three-dimensional (3D) pharmacophore(s). This approach avoids the pitfalls of structure-based techniques because it only focuses on common features among known ligands; furthermore, the pharmacophore model can be used as 3D search queries to discover new Topo I inhibitory scaffolds. In this article, we employed the HipHop module using Discovery Studio to construct plausible binding hypotheses for clinically used Topo I inhibitors, such as camptothecin, topotecan, belotecan, and SN-38, which is an active metabolite of irinotecan. The docked pose of topotecan was selected as a reference compound. The first hypothesis (Hypo 01) among the obtained 10 hypotheses was chosen for further analysis. Hypo 01 had six features, which were two hydrogen-bond acceptors, one hydrogen-bond donor, one hydrophob aromatic and one hydrophob aliphatic, and one ring aromatic. Our obtained hypothesis was checked by using some of the aromathecin derivatives which were published for their Topo I inhibitory potency. Moreover, five structures were found to be possible anti-Topo I compounds from the DruglikeDiverse database. From this research, it can be suggested that our model could be useful for further studies in order to design new potent Topo I-targeting antitumor drugs.

  7. Molecular modeling of histamine H3 receptor and QSAR studies on arylbenzofuran derived H3 antagonists.

    PubMed

    Dastmalchi, Siavoush; Hamzeh-Mivehroud, Maryam; Ghafourian, Taravat; Hamzeiy, Hossain

    2008-01-01

    Histamine H3 receptors are presynaptic autoreceptors found in both central and peripheral nervous systems of many species. The central effects of these receptors suggest a potential therapeutic role for their antagonists in treatment of several neurological disorders such as epilepsy, schizophrenia, Alzheimer's and Parkinson's diseases. The purpose of this study was to identify the structural requirements for H3 antagonistic activity via quantitative structure-activity relationship (QSAR) studies and receptor modeling/docking techniques. A combination of partial least squares (PLS) and genetic algorithm (GA) was used in the QSAR approach to select the structural descriptors relevant to the receptor binding affinity of a series of 58 H3 antagonists. The descriptors were selected out of a pool of >1000 descriptors calculated by DRAGON, Hyperchem and ACD labs suite of programs. The resulting QSAR models for rat and human H3 binding affinities were validated using different strategies. QSAR models generated in the current work suggested the role of charge transfer interactions in the ligand-receptor interaction verified using the molecular modeling of the receptor and docking two antagonists to the binding site. The 3D model of human H3 receptor was built based on bovine rhodopsin structure and evaluated by molecular dynamics (MD) simulation in a mixed water-vacuum-water environment. The results were indicative of the stability of the model relating the observed structural changes during the MD simulation to the suggested ligand-receptor interactions. The results of this investigation are expected to be useful in the process of design and development of new potent H3 receptor antagonists.

  8. Interactive 3D Mars Visualization

    NASA Technical Reports Server (NTRS)

    Powell, Mark W.

    2012-01-01

    The Interactive 3D Mars Visualization system provides high-performance, immersive visualization of satellite and surface vehicle imagery of Mars. The software can be used in mission operations to provide the most accurate position information for the Mars rovers to date. When integrated into the mission data pipeline, this system allows mission planners to view the location of the rover on Mars to 0.01-meter accuracy with respect to satellite imagery, with dynamic updates to incorporate the latest position information. Given this information so early in the planning process, rover drivers are able to plan more accurate drive activities for the rover than ever before, increasing the execution of science activities significantly. Scientifically, this 3D mapping information puts all of the science analyses to date into geologic context on a daily basis instead of weeks or months, as was the norm prior to this contribution. This allows the science planners to judge the efficacy of their previously executed science observations much more efficiently, and achieve greater science return as a result. The Interactive 3D Mars surface view is a Mars terrain browsing software interface that encompasses the entire region of exploration for a Mars surface exploration mission. The view is interactive, allowing the user to pan in any direction by clicking and dragging, or to zoom in or out by scrolling the mouse or touchpad. This set currently includes tools for selecting a point of interest, and a ruler tool for displaying the distance between and positions of two points of interest. The mapping information can be harvested and shared through ubiquitous online mapping tools like Google Mars, NASA WorldWind, and Worldwide Telescope.

  9. 3D Nanostructuring of Semiconductors

    NASA Astrophysics Data System (ADS)

    Blick, Robert

    2000-03-01

    Modern semiconductor technology allows to machine devices on the nanometer scale. I will discuss the current limits of the fabrication processes, which enable the definition of single electron transistors with dimensions down to 8 nm. In addition to the conventional 2D patterning and structuring of semiconductors, I will demonstrate how to apply 3D nanostructuring techniques to build freely suspended single-crystal beams with lateral dimension down to 20 nm. In transport measurements in the temperature range from 30 mK up to 100 K these nano-crystals are characterized regarding their electronic as well as their mechanical properties. Moreover, I will present possible applications of these devices.

  10. What Lies Ahead (3-D)

    NASA Technical Reports Server (NTRS)

    2004-01-01

    This 3-D cylindrical-perspective mosaic taken by the navigation camera on the Mars Exploration Rover Spirit on sol 82 shows the view south of the large crater dubbed 'Bonneville.' The rover will travel toward the Columbia Hills, seen here at the upper left. The rock dubbed 'Mazatzal' and the hole the rover drilled in to it can be seen at the lower left. The rover's position is referred to as 'Site 22, Position 32.' This image was geometrically corrected to make the horizon appear flat.

  11. Making Inexpensive 3-D Models

    NASA Astrophysics Data System (ADS)

    Manos, Harry

    2016-03-01

    Visual aids are important to student learning, and they help make the teacher's job easier. Keeping with the TPT theme of "The Art, Craft, and Science of Physics Teaching," the purpose of this article is to show how teachers, lacking equipment and funds, can construct a durable 3-D model reference frame and a model gravity well tailored to specific class lessons. Most of the supplies are readily available in the home or at school: rubbing alcohol, a rag, two colors of spray paint, art brushes, and masking tape. The cost of these supplies, if you don't have them, is less than 20.

  12. A Clean Adirondack (3-D)

    NASA Technical Reports Server (NTRS)

    2004-01-01

    This is a 3-D anaglyph showing a microscopic image taken of an area measuring 3 centimeters (1.2 inches) across on the rock called Adirondack. The image was taken at Gusev Crater on the 33rd day of the Mars Exploration Rover Spirit's journey (Feb. 5, 2004), after the rover used its rock abrasion tool brush to clean the surface of the rock. Dust, which was pushed off to the side during cleaning, can still be seen to the left and in low areas of the rock.

  13. 3D Printed Shelby Cobra

    SciTech Connect

    Love, Lonnie

    2015-01-09

    ORNL's newly printed 3D Shelby Cobra was showcased at the 2015 NAIAS in Detroit. This "laboratory on wheels" uses the Shelby Cobra design, celebrating the 50th anniversary of this model and honoring the first vehicle to be voted a national monument. The Shelby was printed at the Department of Energy’s Manufacturing Demonstration Facility at ORNL using the BAAM (Big Area Additive Manufacturing) machine and is intended as a “plug-n-play” laboratory on wheels. The Shelby will allow research and development of integrated components to be tested and enhanced in real time, improving the use of sustainable, digital manufacturing solutions in the automotive industry.

  14. Positional Awareness Map 3D (PAM3D)

    NASA Technical Reports Server (NTRS)

    Hoffman, Monica; Allen, Earl L.; Yount, John W.; Norcross, April Louise

    2012-01-01

    The Western Aeronautical Test Range of the National Aeronautics and Space Administration s Dryden Flight Research Center needed to address the aging software and hardware of its current situational awareness display application, the Global Real-Time Interactive Map (GRIM). GRIM was initially developed in the late 1980s and executes on older PC architectures using a Linux operating system that is no longer supported. Additionally, the software is difficult to maintain due to its complexity and loss of developer knowledge. It was decided that a replacement application must be developed or acquired in the near future. The replacement must provide the functionality of the original system, the ability to monitor test flight vehicles in real-time, and add improvements such as high resolution imagery and true 3-dimensional capability. This paper will discuss the process of determining the best approach to replace GRIM, and the functionality and capabilities of the first release of the Positional Awareness Map 3D.

  15. 3D printed bionic ears.

    PubMed

    Mannoor, Manu S; Jiang, Ziwen; James, Teena; Kong, Yong Lin; Malatesta, Karen A; Soboyejo, Winston O; Verma, Naveen; Gracias, David H; McAlpine, Michael C

    2013-06-12

    The ability to three-dimensionally interweave biological tissue with functional electronics could enable the creation of bionic organs possessing enhanced functionalities over their human counterparts. Conventional electronic devices are inherently two-dimensional, preventing seamless multidimensional integration with synthetic biology, as the processes and materials are very different. Here, we present a novel strategy for overcoming these difficulties via additive manufacturing of biological cells with structural and nanoparticle derived electronic elements. As a proof of concept, we generated a bionic ear via 3D printing of a cell-seeded hydrogel matrix in the anatomic geometry of a human ear, along with an intertwined conducting polymer consisting of infused silver nanoparticles. This allowed for in vitro culturing of cartilage tissue around an inductive coil antenna in the ear, which subsequently enables readout of inductively-coupled signals from cochlea-shaped electrodes. The printed ear exhibits enhanced auditory sensing for radio frequency reception, and complementary left and right ears can listen to stereo audio music. Overall, our approach suggests a means to intricately merge biologic and nanoelectronic functionalities via 3D printing.

  16. 3D Printable Graphene Composite

    PubMed Central

    Wei, Xiaojun; Li, Dong; Jiang, Wei; Gu, Zheming; Wang, Xiaojuan; Zhang, Zengxing; Sun, Zhengzong

    2015-01-01

    In human being’s history, both the Iron Age and Silicon Age thrived after a matured massive processing technology was developed. Graphene is the most recent superior material which could potentially initialize another new material Age. However, while being exploited to its full extent, conventional processing methods fail to provide a link to today’s personalization tide. New technology should be ushered in. Three-dimensional (3D) printing fills the missing linkage between graphene materials and the digital mainstream. Their alliance could generate additional stream to push the graphene revolution into a new phase. Here we demonstrate for the first time, a graphene composite, with a graphene loading up to 5.6 wt%, can be 3D printable into computer-designed models. The composite’s linear thermal coefficient is below 75 ppm·°C−1 from room temperature to its glass transition temperature (Tg), which is crucial to build minute thermal stress during the printing process. PMID:26153673

  17. 3D Printed Bionic Ears

    PubMed Central

    Mannoor, Manu S.; Jiang, Ziwen; James, Teena; Kong, Yong Lin; Malatesta, Karen A.; Soboyejo, Winston O.; Verma, Naveen; Gracias, David H.; McAlpine, Michael C.

    2013-01-01

    The ability to three-dimensionally interweave biological tissue with functional electronics could enable the creation of bionic organs possessing enhanced functionalities over their human counterparts. Conventional electronic devices are inherently two-dimensional, preventing seamless multidimensional integration with synthetic biology, as the processes and materials are very different. Here, we present a novel strategy for overcoming these difficulties via additive manufacturing of biological cells with structural and nanoparticle derived electronic elements. As a proof of concept, we generated a bionic ear via 3D printing of a cell-seeded hydrogel matrix in the precise anatomic geometry of a human ear, along with an intertwined conducting polymer consisting of infused silver nanoparticles. This allowed for in vitro culturing of cartilage tissue around an inductive coil antenna in the ear, which subsequently enables readout of inductively-coupled signals from cochlea-shaped electrodes. The printed ear exhibits enhanced auditory sensing for radio frequency reception, and complementary left and right ears can listen to stereo audio music. Overall, our approach suggests a means to intricately merge biologic and nanoelectronic functionalities via 3D printing. PMID:23635097

  18. Martian terrain & airbags - 3D

    NASA Technical Reports Server (NTRS)

    1997-01-01

    Portions of the lander's deflated airbags and a petal are at lower left in this image, taken in stereo by the Imager for Mars Pathfinder (IMP) on Sol 3. 3D glasses are necessary to identify surface detail. This image is part of a 3D 'monster' panorama of the area surrounding the landing site.

    Mars Pathfinder is the second in NASA's Discovery program of low-cost spacecraft with highly focused science goals. The Jet Propulsion Laboratory, Pasadena, CA, developed and manages the Mars Pathfinder mission for NASA's Office of Space Science, Washington, D.C. JPL is an operating division of the California Institute of Technology (Caltech). The Imager for Mars Pathfinder (IMP) was developed by the University of Arizona Lunar and Planetary Laboratory under contract to JPL. Peter Smith is the Principal Investigator.

    Click below to see the left and right views individually. [figure removed for brevity, see original site] Left [figure removed for brevity, see original site] Right

  19. Martian terrain & airbags - 3D

    NASA Technical Reports Server (NTRS)

    1997-01-01

    Portions of the lander's deflated airbags and a petal are at the lower area of this image, taken in stereo by the Imager for Mars Pathfinder (IMP) on Sol 3. 3D glasses are necessary to identify surface detail. This image is part of a 3D 'monster' panorama of the area surrounding the landing site.

    Mars Pathfinder is the second in NASA's Discovery program of low-cost spacecraft with highly focused science goals. The Jet Propulsion Laboratory, Pasadena, CA, developed and manages the Mars Pathfinder mission for NASA's Office of Space Science, Washington, D.C. JPL is an operating division of the California Institute of Technology (Caltech). The Imager for Mars Pathfinder (IMP) was developed by the University of Arizona Lunar and Planetary Laboratory under contract to JPL. Peter Smith is the Principal Investigator.

    Click below to see the left and right views individually. [figure removed for brevity, see original site] Left [figure removed for brevity, see original site] Right

  20. 3D structured illumination microscopy

    NASA Astrophysics Data System (ADS)

    Dougherty, William M.; Goodwin, Paul C.

    2011-03-01

    Three-dimensional structured illumination microscopy achieves double the lateral and axial resolution of wide-field microscopy, using conventional fluorescent dyes, proteins and sample preparation techniques. A three-dimensional interference-fringe pattern excites the fluorescence, filling in the "missing cone" of the wide field optical transfer function, thereby enabling axial (z) discrimination. The pattern acts as a spatial carrier frequency that mixes with the higher spatial frequency components of the image, which usually succumb to the diffraction limit. The fluorescence image encodes the high frequency content as a down-mixed, moiré-like pattern. A series of images is required, wherein the 3D pattern is shifted and rotated, providing down-mixed data for a system of linear equations. Super-resolution is obtained by solving these equations. The speed with which the image series can be obtained can be a problem for the microscopy of living cells. Challenges include pattern-switching speeds, optical efficiency, wavefront quality and fringe contrast, fringe pitch optimization, and polarization issues. We will review some recent developments in 3D-SIM hardware with the goal of super-resolved z-stacks of motile cells.

  1. 3D MI-DRAGON: new model for the reconstruction of US FDA drug- target network and theoretical-experimental studies of inhibitors of rasagiline derivatives for AChE.

    PubMed

    Prado-Prado, Francisco; García-Mera, Xerardo; Escobar, Manuel; Alonso, Nerea; Caamaño, Olga; Yañez, Matilde; González-Díaz, Humberto

    2012-01-01

    The number of neurodegenerative diseases has been increasing in recent years. Many of the drug candidates to be used in the treatment of neurodegenerative diseases present specific 3D structural features. An important protein in this sense is the acetylcholinesterase (AChE), which is the target of many Alzheimer's dementia drugs. Consequently, the prediction of Drug-Protein Interactions (DPIs/nDPIs) between new drug candidates and specific 3D structure and targets is of major importance. To this end, we can use Quantitative Structure-Activity Relationships (QSAR) models to carry out a rational DPIs prediction. Unfortunately, many previous QSAR models developed to predict DPIs take into consideration only 2D structural information and codify the activity against only one target. To solve this problem we can develop some 3D multi-target QSAR (3D mt-QSAR) models. In this study, using the 3D MI-DRAGON technique, we have introduced a new predictor for DPIs based on two different well-known software. We have used the MARCH-INSIDE (MI) and DRAGON software to calculate 3D structural parameters for drugs and targets respectively. Both classes of 3D parameters were used as input to train Artificial Neuronal Network (ANN) algorithms using as benchmark dataset the complex network (CN) made up of all DPIs between US FDA approved drugs and their targets. The entire dataset was downloaded from the DrugBank database. The best 3D mt-QSAR predictor found was an ANN of Multi-Layer Perceptron-type (MLP) with profile MLP 37:37-24-1:1. This MLP classifies correctly 274 out of 321 DPIs (Sensitivity = 85.35%) and 1041 out of 1190 nDPIs (Specificity = 87.48%), corresponding to training Accuracy = 87.03%. We have validated the model with external predicting series with Sensitivity = 84.16% (542/644 DPIs; Specificity = 87.51% (2039/2330 nDPIs) and Accuracy = 86.78%. The new CNs of DPIs reconstructed from US FDA can be used to explore large DPI databases in order to discover both new drugs

  2. 3D Printing of Graphene Aerogels.

    PubMed

    Zhang, Qiangqiang; Zhang, Feng; Medarametla, Sai Pradeep; Li, Hui; Zhou, Chi; Lin, Dong

    2016-04-06

    3D printing of a graphene aerogel with true 3D overhang structures is highlighted. The aerogel is fabricated by combining drop-on-demand 3D printing and freeze casting. The water-based GO ink is ejected and freeze-cast into designed 3D structures. The lightweight (<10 mg cm(-3) ) 3D printed graphene aerogel presents superelastic and high electrical conduction.

  3. Quasi 3D dispersion experiment

    NASA Astrophysics Data System (ADS)

    Bakucz, P.

    2003-04-01

    This paper studies the problem of tracer dispersion in a coloured fluid flowing through a two-phase 3D rough channel-system in a 40 cm*40 cm plexi-container filled by homogen glass fractions and colourless fluid. The unstable interface between the driving coloured fluid and the colourless fluid develops viscous fingers with a fractal structure at high capillary number. Five two-dimensional fractal fronts have been observed at the same time using four cameras along the vertical side-walls and using one camera located above the plexi-container. In possession of five fronts the spatial concentration contours are determined using statistical models. The concentration contours are self-affine fractal curves with a fractal dimension D=2.19. This result is valid for disperison at high Péclet numbers.

  4. ShowMe3D

    SciTech Connect

    Sinclair, Michael B

    2012-01-05

    ShowMe3D is a data visualization graphical user interface specifically designed for use with hyperspectral image obtained from the Hyperspectral Confocal Microscope. The program allows the user to select and display any single image from a three dimensional hyperspectral image stack. By moving a slider control, the user can easily move between images of the stack. The user can zoom into any region of the image. The user can select any pixel or region from the displayed image and display the fluorescence spectrum associated with that pixel or region. The user can define up to 3 spectral filters to apply to the hyperspectral image and view the image as it would appear from a filter-based confocal microscope. The user can also obtain statistics such as intensity average and variance from selected regions.

  5. 3D Printed Shelby Cobra

    ScienceCinema

    Love, Lonnie

    2016-11-02

    ORNL's newly printed 3D Shelby Cobra was showcased at the 2015 NAIAS in Detroit. This "laboratory on wheels" uses the Shelby Cobra design, celebrating the 50th anniversary of this model and honoring the first vehicle to be voted a national monument. The Shelby was printed at the Department of Energy’s Manufacturing Demonstration Facility at ORNL using the BAAM (Big Area Additive Manufacturing) machine and is intended as a “plug-n-play” laboratory on wheels. The Shelby will allow research and development of integrated components to be tested and enhanced in real time, improving the use of sustainable, digital manufacturing solutions in the automotive industry.

  6. Supernova Remnant in 3-D

    NASA Technical Reports Server (NTRS)

    2009-01-01

    wavelengths. Since the amount of the wavelength shift is related to the speed of motion, one can determine how fast the debris are moving in either direction. Because Cas A is the result of an explosion, the stellar debris is expanding radially outwards from the explosion center. Using simple geometry, the scientists were able to construct a 3-D model using all of this information. A program called 3-D Slicer modified for astronomical use by the Astronomical Medicine Project at Harvard University in Cambridge, Mass. was used to display and manipulate the 3-D model. Commercial software was then used to create the 3-D fly-through.

    The blue filaments defining the blast wave were not mapped using the Doppler effect because they emit a different kind of light synchrotron radiation that does not emit light at discrete wavelengths, but rather in a broad continuum. The blue filaments are only a representation of the actual filaments observed at the blast wave.

    This visualization shows that there are two main components to this supernova remnant: a spherical component in the outer parts of the remnant and a flattened (disk-like) component in the inner region. The spherical component consists of the outer layer of the star that exploded, probably made of helium and carbon. These layers drove a spherical blast wave into the diffuse gas surrounding the star. The flattened component that astronomers were unable to map into 3-D prior to these Spitzer observations consists of the inner layers of the star. It is made from various heavier elements, not all shown in the visualization, such as oxygen, neon, silicon, sulphur, argon and iron.

    High-velocity plumes, or jets, of this material are shooting out from the explosion in the plane of the disk-like component mentioned above. Plumes of silicon appear in the northeast and southwest, while those of iron are seen in the southeast and north. These jets were already known and Doppler velocity measurements have been made for these

  7. Pharmacophore modeling, resistant mutant isolation, docking, and MM-PBSA analysis: Combined experimental/computer-assisted approaches to identify new inhibitors of the bovine viral diarrhea virus (BVDV).

    PubMed

    Tonelli, Michele; Boido, Vito; La Colla, Paolo; Loddo, Roberta; Posocco, Paola; Paneni, Maria Silvia; Fermeglia, Maurizio; Pricl, Sabrina

    2010-03-15

    Starting from a series of our new 2-phenylbenzimidazole derivatives, shown to be selectively and potently active against the bovine viral diarrhea virus (BVDV), we developed a hierarchical combined experimental/molecular modeling strategy to explore the drug leads for the BVDV RNA-dependent RNA-polymerase. Accordingly, a successful 3D pharmacophore model was developed, characterized by distinct chemical features that may be responsible for the activity of the inhibitors. BVDV mutants resistant to lead compounds in our series were then isolated, and the mutant residues on the viral molecular target, the RNA-dependent RNA-polymerase, were identified. Docking procedures upon pharmacophoric constraints and mutational data were carried out, and the binding affinity of all active compounds for the RdRp were estimated. Given the excellent agreement between in silico and in vitro data, this procedure is currently being employed in the design a new series of more selective and potent BVDV inhibitors.

  8. QSAR trout toxicity models on aromatic pesticides.

    PubMed

    Slavov, Svetoslav; Gini, Giuseppina; Benfenati, Emilio

    2008-11-01

    The pesticides originally designed to kill target organisms are dangerous for many other wild species. Since they are applied directly to the environment, they can easily reach the water basins and the topsoil. A dataset of 125 aromatic pesticides with well-expressed aquatic toxicity towards trout was subjected to quantitative structure activity relationships (QSAR) analysis aimed to establish the relationship between their molecular structure and biological activity. A literature data for LC50 concentration killing 50% of fish was used. In addition to the standard 2D-QSAR analysis, a comparative molecular field analysis (CoMFA) analysis considering the electrostatic and steric properties of the molecules was also performed. The CoMFA analysis helped the recognition of the steric interactions as playing an important role for aquatic toxicity. In addition, the transport properties and the stability of the compounds studied were also identified as important for their biological activity.

  9. Residual-QSAR. Implications for genotoxic carcinogenesis

    PubMed Central

    2011-01-01

    Introduction Both main types of carcinogenesis, genotoxic and epigenetic, were examined in the context of non-congenericity and similarity, respectively, for the structure of ligand molecules, emphasizing the role of quantitative structure-activity relationship ((Q)SAR) studies in accordance with OECD (Organization for Economic and Cooperation Development) regulations. The main purpose of this report involves electrophilic theory and the need for meaningful physicochemical parameters to describe genotoxicity by a general mechanism. Residual-QSAR Method The double or looping multiple linear correlation was examined by comparing the direct and residual structural information against the observed activity. A self-consistent equation of observed-computed activity was assumed to give maximum correlation efficiency for those situations in which the direct correlations gave non-significant statistical information. Alternatively, it was also suited to describe slow and apparently non-noticeable cancer phenomenology, with special application to non-congeneric molecules involved in genotoxic carcinogenesis. Application and Discussions The QSAR principles were systematically applied to a given pool of molecules with genotoxic activity in rats to elucidate their carcinogenic mechanisms. Once defined, the endpoint associated with ligand-DNA interaction was used to select variables that retained the main Hansch physicochemical parameters of hydrophobicity, polarizability and stericity, computed by the custom PM3 semiempirical quantum method. The trial and test sets of working molecules were established by implementing the normal Gaussian principle of activities that applies when the applicability domain is not restrained to the congeneric compounds, as in the present study. The application of the residual, self-consistent QSAR method and the factor (or average) method yielded results characterized by extremely high and low correlations, respectively, with the latter resembling

  10. Prediction oriented QSAR modelling of EGFR inhibition.

    PubMed

    Szántai-Kis, C; Kövesdi, I; Eros, D; Bánhegyi, P; Ullrich, A; Kéri, G; Orfi, L

    2006-01-01

    Epidermal Growth Factor Receptor (EGFR) is a high priority target in anticancer drug research. Thousands of very effective EGFR inhibitors have been developed in the last decade. The known inhibitors are originated from a very diverse chemical space but--without exception--all of them act at the Adenosine TriPhosphate (ATP) binding site of the enzyme. We have collected all of the diverse inhibitor structures and the relevant biological data obtained from comparable assays and built prediction oriented Quantitative Structure-Activity Relationship (QSAR) which models the ATP binding pocket's interactive surface from the ligand side. We describe a QSAR method with automatic Variable Subset Selection (VSS) by Genetic Algorithm (GA) and goodness-of-prediction driven QSAR model building, resulting an externally validated EGFR inhibitory model built from pIC50 values of a diverse structural set of 623 EGFR inhibitors. Repeated Trainings/Evaluations (RTE) were used to obtain model fitness values and the effectiveness of VSS is amplified by using predictive ability scores of descriptors. Numerous models were generated by different methods and viable models were collected. Then, intensive RTE were applied to identify ultimate models for external validations. Finally, suitable models were validated by statistical tests. Since we use calculated molecular descriptors in the modeling, these models are suitable for virtual screening for obtaining novel potential EGFR inhibitors.

  11. QSAR Accelerated Discovery of Potent Ice Recrystallization Inhibitors

    NASA Astrophysics Data System (ADS)

    Briard, Jennie G.; Fernandez, Michael; de Luna, Phil; Woo, Tom. K.; Ben, Robert N.

    2016-05-01

    Ice recrystallization is the main contributor to cell damage and death during the cryopreservation of cells and tissues. Over the past five years, many small carbohydrate-based molecules were identified as ice recrystallization inhibitors and several were shown to reduce cryoinjury during the cryopreservation of red blood cells (RBCs) and hematopoietic stems cells (HSCs). Unfortunately, clear structure-activity relationships have not been identified impeding the rational design of future compounds possessing ice recrystallization inhibition (IRI) activity. A set of 124 previously synthesized compounds with known IRI activities were used to calibrate 3D-QSAR classification models using GRid INdependent Descriptors (GRIND) derived from DFT level quantum mechanical calculations. Partial least squares (PLS) model was calibrated with 70% of the data set which successfully identified 80% of the IRI active compounds with a precision of 0.8. This model exhibited good performance in screening the remaining 30% of the data set with 70% of active additives successfully recovered with a precision of ~0.7 and specificity of 0.8. The model was further applied to screen a new library of aryl-alditol molecules which were then experimentally synthesized and tested with a success rate of 82%. Presented is the first computer-aided high-throughput experimental screening for novel IRI active compounds.

  12. QSAR Accelerated Discovery of Potent Ice Recrystallization Inhibitors.

    PubMed

    Briard, Jennie G; Fernandez, Michael; De Luna, Phil; Woo, Tom K; Ben, Robert N

    2016-05-24

    Ice recrystallization is the main contributor to cell damage and death during the cryopreservation of cells and tissues. Over the past five years, many small carbohydrate-based molecules were identified as ice recrystallization inhibitors and several were shown to reduce cryoinjury during the cryopreservation of red blood cells (RBCs) and hematopoietic stems cells (HSCs). Unfortunately, clear structure-activity relationships have not been identified impeding the rational design of future compounds possessing ice recrystallization inhibition (IRI) activity. A set of 124 previously synthesized compounds with known IRI activities were used to calibrate 3D-QSAR classification models using GRid INdependent Descriptors (GRIND) derived from DFT level quantum mechanical calculations. Partial least squares (PLS) model was calibrated with 70% of the data set which successfully identified 80% of the IRI active compounds with a precision of 0.8. This model exhibited good performance in screening the remaining 30% of the data set with 70% of active additives successfully recovered with a precision of ~0.7 and specificity of 0.8. The model was further applied to screen a new library of aryl-alditol molecules which were then experimentally synthesized and tested with a success rate of 82%. Presented is the first computer-aided high-throughput experimental screening for novel IRI active compounds.

  13. 3D Kitaev spin liquids

    NASA Astrophysics Data System (ADS)

    Hermanns, Maria

    The Kitaev honeycomb model has become one of the archetypal spin models exhibiting topological phases of matter, where the magnetic moments fractionalize into Majorana fermions interacting with a Z2 gauge field. In this talk, we discuss generalizations of this model to three-dimensional lattice structures. Our main focus is the metallic state that the emergent Majorana fermions form. In particular, we discuss the relation of the nature of this Majorana metal to the details of the underlying lattice structure. Besides (almost) conventional metals with a Majorana Fermi surface, one also finds various realizations of Dirac semi-metals, where the gapless modes form Fermi lines or even Weyl nodes. We introduce a general classification of these gapless quantum spin liquids using projective symmetry analysis. Furthermore, we briefly outline why these Majorana metals in 3D Kitaev systems provide an even richer variety of Dirac and Weyl phases than possible for electronic matter and comment on possible experimental signatures. Work done in collaboration with Kevin O'Brien and Simon Trebst.

  14. 3D multiplexed immunoplasmonics microscopy

    NASA Astrophysics Data System (ADS)

    Bergeron, Éric; Patskovsky, Sergiy; Rioux, David; Meunier, Michel

    2016-07-01

    Selective labelling, identification and spatial distribution of cell surface biomarkers can provide important clinical information, such as distinction between healthy and diseased cells, evolution of a disease and selection of the optimal patient-specific treatment. Immunofluorescence is the gold standard for efficient detection of biomarkers expressed by cells. However, antibodies (Abs) conjugated to fluorescent dyes remain limited by their photobleaching, high sensitivity to the environment, low light intensity, and wide absorption and emission spectra. Immunoplasmonics is a novel microscopy method based on the visualization of Abs-functionalized plasmonic nanoparticles (fNPs) targeting cell surface biomarkers. Tunable fNPs should provide higher multiplexing capacity than immunofluorescence since NPs are photostable over time, strongly scatter light at their plasmon peak wavelengths and can be easily functionalized. In this article, we experimentally demonstrate accurate multiplexed detection based on the immunoplasmonics approach. First, we achieve the selective labelling of three targeted cell surface biomarkers (cluster of differentiation 44 (CD44), epidermal growth factor receptor (EGFR) and voltage-gated K+ channel subunit KV1.1) on human cancer CD44+ EGFR+ KV1.1+ MDA-MB-231 cells and reference CD44- EGFR- KV1.1+ 661W cells. The labelling efficiency with three stable specific immunoplasmonics labels (functionalized silver nanospheres (CD44-AgNSs), gold (Au) NSs (EGFR-AuNSs) and Au nanorods (KV1.1-AuNRs)) detected by reflected light microscopy (RLM) is similar to the one with immunofluorescence. Second, we introduce an improved method for 3D localization and spectral identification of fNPs based on fast z-scanning by RLM with three spectral filters corresponding to the plasmon peak wavelengths of the immunoplasmonics labels in the cellular environment (500 nm for 80 nm AgNSs, 580 nm for 100 nm AuNSs and 700 nm for 40 nm × 92 nm AuNRs). Third, the developed

  15. Crowdsourcing Based 3d Modeling

    NASA Astrophysics Data System (ADS)

    Somogyi, A.; Barsi, A.; Molnar, B.; Lovas, T.

    2016-06-01

    Web-based photo albums that support organizing and viewing the users' images are widely used. These services provide a convenient solution for storing, editing and sharing images. In many cases, the users attach geotags to the images in order to enable using them e.g. in location based applications on social networks. Our paper discusses a procedure that collects open access images from a site frequently visited by tourists. Geotagged pictures showing the image of a sight or tourist attraction are selected and processed in photogrammetric processing software that produces the 3D model of the captured object. For the particular investigation we selected three attractions in Budapest. To assess the geometrical accuracy, we used laser scanner and DSLR as well as smart phone photography to derive reference values to enable verifying the spatial model obtained from the web-album images. The investigation shows how detailed and accurate models could be derived applying photogrammetric processing software, simply by using images of the community, without visiting the site.

  16. Combining Metabolite-Based Pharmacophores with Bayesian Machine Learning Models for Mycobacterium tuberculosis Drug Discovery

    PubMed Central

    Sarker, Malabika; Li, Shao-Gang; Mittal, Nisha; Kumar, Pradeep; Wang, Xin; Stratton, Thomas P.; Zimmerman, Matthew; Talcott, Carolyn; Bourbon, Pauline; Travers, Mike; Yadav, Maneesh

    2015-01-01

    Integrated computational approaches for Mycobacterium tuberculosis (Mtb) are useful to identify new molecules that could lead to future tuberculosis (TB) drugs. Our approach uses information derived from the TBCyc pathway and genome database, the Collaborative Drug Discovery TB database combined with 3D pharmacophores and dual event Bayesian models of whole-cell activity and lack of cytotoxicity. We have prioritized a large number of molecules that may act as mimics of substrates and metabolites in the TB metabolome. We computationally searched over 200,000 commercial molecules using 66 pharmacophores based on substrates and metabolites from Mtb and further filtering with Bayesian models. We ultimately tested 110 compounds in vitro that resulted in two compounds of interest, BAS 04912643 and BAS 00623753 (MIC of 2.5 and 5 μg/mL, respectively). These molecules were used as a starting point for hit-to-lead optimization. The most promising class proved to be the quinoxaline di-N-oxides, evidenced by transcriptional profiling to induce mRNA level perturbations most closely resembling known protonophores. One of these, SRI58 exhibited an MIC = 1.25 μg/mL versus Mtb and a CC50 in Vero cells of >40 μg/mL, while featuring fair Caco-2 A-B permeability (2.3 x 10−6 cm/s), kinetic solubility (125 μM at pH 7.4 in PBS) and mouse metabolic stability (63.6% remaining after 1 h incubation with mouse liver microsomes). Despite demonstration of how a combined bioinformatics/cheminformatics approach afforded a small molecule with promising in vitro profiles, we found that SRI58 did not exhibit quantifiable blood levels in mice. PMID:26517557

  17. [3D emulation of epicardium dynamic mapping].

    PubMed

    Lu, Jun; Yang, Cui-Wei; Fang, Zu-Xiang

    2005-03-01

    In order to realize epicardium dynamic mapping of the whole atria, 3-D graphics are drawn with OpenGL. Some source codes are introduced in the paper to explain how to produce, read, and manipulate 3-D model data.

  18. An interactive multiview 3D display system

    NASA Astrophysics Data System (ADS)

    Zhang, Zhaoxing; Geng, Zheng; Zhang, Mei; Dong, Hui

    2013-03-01

    The progresses in 3D display systems and user interaction technologies will help more effective 3D visualization of 3D information. They yield a realistic representation of 3D objects and simplifies our understanding to the complexity of 3D objects and spatial relationship among them. In this paper, we describe an autostereoscopic multiview 3D display system with capability of real-time user interaction. Design principle of this autostereoscopic multiview 3D display system is presented, together with the details of its hardware/software architecture. A prototype is built and tested based upon multi-projectors and horizontal optical anisotropic display structure. Experimental results illustrate the effectiveness of this novel 3D display and user interaction system.

  19. Volume-rendering on a 3D hyperwall: A molecular visualization platform for research, education and outreach.

    PubMed

    MacDougall, Preston J; Henze, Christopher E; Volkov, Anatoliy

    2016-11-01

    We present a unique platform for molecular visualization and design that uses novel subatomic feature detection software in tandem with 3D hyperwall visualization technology. We demonstrate the fleshing-out of pharmacophores in drug molecules, as well as reactive sites in catalysts, focusing on subatomic features. Topological analysis with picometer resolution, in conjunction with interactive volume-rendering of the Laplacian of the electronic charge density, leads to new insight into docking and catalysis. Visual data-mining is done efficiently and in parallel using a 4×4 3D hyperwall (a tiled array of 3D monitors driven independently by slave GPUs but displaying high-resolution, synchronized and functionally-related images). The visual texture of images for a wide variety of molecular systems are intuitive to experienced chemists but also appealing to neophytes, making the platform simultaneously useful as a tool for advanced research as well as for pedagogical and STEM education outreach purposes.

  20. Laser Based 3D Volumetric Display System

    DTIC Science & Technology

    1993-03-01

    Literature, Costa Mesa, CA July 1983. 3. "A Real Time Autostereoscopic Multiplanar 3D Display System", Rodney Don Williams, Felix Garcia, Jr., Texas...8217 .- NUMBERS LASER BASED 3D VOLUMETRIC DISPLAY SYSTEM PR: CD13 0. AUTHOR(S) PE: N/AWIU: DN303151 P. Soltan, J. Trias, W. Robinson, W. Dahlke 7...laser generated 3D volumetric images on a rotating double helix, (where the 3D displays are computer controlled for group viewing with the naked eye

  1. True 3d Images and Their Applications

    NASA Astrophysics Data System (ADS)

    Wang, Z.; wang@hzgeospace., zheng.

    2012-07-01

    A true 3D image is a geo-referenced image. Besides having its radiometric information, it also has true 3Dground coordinates XYZ for every pixels of it. For a true 3D image, especially a true 3D oblique image, it has true 3D coordinates not only for building roofs and/or open grounds, but also for all other visible objects on the ground, such as visible building walls/windows and even trees. The true 3D image breaks the 2D barrier of the traditional orthophotos by introducing the third dimension (elevation) into the image. From a true 3D image, for example, people will not only be able to read a building's location (XY), but also its height (Z). true 3D images will fundamentally change, if not revolutionize, the way people display, look, extract, use, and represent the geospatial information from imagery. In many areas, true 3D images can make profound impacts on the ways of how geospatial information is represented, how true 3D ground modeling is performed, and how the real world scenes are presented. This paper first gives a definition and description of a true 3D image and followed by a brief review of what key advancements of geospatial technologies have made the creation of true 3D images possible. Next, the paper introduces what a true 3D image is made of. Then, the paper discusses some possible contributions and impacts the true 3D images can make to geospatial information fields. At the end, the paper presents a list of the benefits of having and using true 3D images and the applications of true 3D images in a couple of 3D city modeling projects.

  2. 3D Printing and Its Urologic Applications

    PubMed Central

    Soliman, Youssef; Feibus, Allison H; Baum, Neil

    2015-01-01

    3D printing is the development of 3D objects via an additive process in which successive layers of material are applied under computer control. This article discusses 3D printing, with an emphasis on its historical context and its potential use in the field of urology. PMID:26028997

  3. Teaching Geography with 3-D Visualization Technology

    ERIC Educational Resources Information Center

    Anthamatten, Peter; Ziegler, Susy S.

    2006-01-01

    Technology that helps students view images in three dimensions (3-D) can support a broad range of learning styles. "Geo-Wall systems" are visualization tools that allow scientists, teachers, and students to project stereographic images and view them in 3-D. We developed and presented 3-D visualization exercises in several undergraduate courses.…

  4. Expanding Geometry Understanding with 3D Printing

    ERIC Educational Resources Information Center

    Cochran, Jill A.; Cochran, Zane; Laney, Kendra; Dean, Mandi

    2016-01-01

    With the rise of personal desktop 3D printing, a wide spectrum of educational opportunities has become available for educators to leverage this technology in their classrooms. Until recently, the ability to create physical 3D models was well beyond the scope, skill, and budget of many schools. However, since desktop 3D printers have become readily…

  5. Beowulf 3D: a case study

    NASA Astrophysics Data System (ADS)

    Engle, Rob

    2008-02-01

    This paper discusses the creative and technical challenges encountered during the production of "Beowulf 3D," director Robert Zemeckis' adaptation of the Old English epic poem and the first film to be simultaneously released in IMAX 3D and digital 3D formats.

  6. 3D Flow Visualization Using Texture Advection

    NASA Technical Reports Server (NTRS)

    Kao, David; Zhang, Bing; Kim, Kwansik; Pang, Alex; Moran, Pat (Technical Monitor)

    2001-01-01

    Texture advection is an effective tool for animating and investigating 2D flows. In this paper, we discuss how this technique can be extended to 3D flows. In particular, we examine the use of 3D and 4D textures on 3D synthetic and computational fluid dynamics flow fields.

  7. Predicting human plasma protein binding of drugs using plasma protein interaction QSAR analysis (PPI-QSAR).

    PubMed

    Li, Haiyan; Chen, Zhuxi; Xu, Xuejun; Sui, Xiaofan; Guo, Tao; Liu, Wei; Zhang, Jiwen

    2011-09-01

    A novel method, named as the plasma protein-interaction QSAR analysis (PPI-QSAR) was used to construct the QSAR models for human plasma protein binding. The intra-molecular descriptors of drugs and inter-molecular interaction descriptors resulted from the docking simulation between drug molecules and human serum albumin were included as independent variables in this method. A structure-based in silico model for a data set of 65 antibiotic drugs was constructed by the multiple linear regression method and validated by the residual analysis, the normal Probability-Probability plot and Williams plot. The R(2) and Q(2) values of the entire data set were 0.87 and 0.77, respectively, for the training set were 0.86 and 0.72, respectively. The results indicated that the fitted model is robust, stable and satisfies all the prerequisites of the regression models. Combining intra-molecular descriptors with inter-molecular interaction descriptors between drug molecules and human serum albumin, the drug plasma protein binding could be modeled and predicted by the PPI-QSAR method successfully.

  8. Pharmacophore based approach to design inhibitors in crustaceans: an insight into the molt inhibition response to the receptor guanylyl cyclase.

    PubMed

    Shrivastava, Sajal; Princy, S Adline

    2014-04-01

    The first set of competitive inhibitors of molt inhibiting hormone (MIH) has been developed using the effective approaches such as Hip-Hop, virtual screening and manual alterations. Moreover, the conserved residues at 71 and 72 positions in the molt inhibiting hormone is known to be significant for selective inhibition of ecdysteroidogenesis; thus, the information from mutation and solution structure were used to generate common pharmacophore features. The geometry of the final six-feature pharmacophore was also found to be consistent with the homology-modeled MIH structures from various other decapod crustaceans. The Hypo-1, comprising six features hypothesis was carefully selected as a best pharmacophore model for virtual screening created on the basis of rank score and cluster processes. The hypothesis was validated and the database was virtually screened using this 3D query and the compounds were then manually altered to enhance the fit value. The hits obtained were further filtered for drug-likeness, which is expressed as physicochemical properties that contribute to favorable ADME/Tox profiles to eliminate the molecules exhibit toxicity and poor pharmacokinetics. In conclusion, the higher fit values of CI-1 (4.6), CI-4 (4.9) and CI-7 (4.2) in conjunction with better pharmacokinetic profile made these molecules practically helpful tool to increase production by accelerating molt in crustaceans. The use of feeding sub-therapeutic dosages of these growth enhancers can be very effectively implemented and certainly turn out to be a vital part of emerging nutritional strategies for economically important crustacean livestock.

  9. 3-D Perspective Pasadena, California

    NASA Technical Reports Server (NTRS)

    2000-01-01

    This perspective view shows the western part of the city of Pasadena, California, looking north towards the San Gabriel Mountains. Portions of the cities of Altadena and La Canada, Flintridge are also shown. The image was created from three datasets: the Shuttle Radar Topography Mission (SRTM) supplied the elevation data; Landsat data from November 11, 1986 provided the land surface color (not the sky) and U.S. Geological Survey digital aerial photography provides the image detail. The Rose Bowl, surrounded by a golf course, is the circular feature at the bottom center of the image. The Jet Propulsion Laboratory is the cluster of large buildings north of the Rose Bowl at the base of the mountains. A large landfill, Scholl Canyon, is the smooth area in the lower left corner of the scene. This image shows the power of combining data from different sources to create planning tools to study problems that affect large urban areas. In addition to the well-known earthquake hazards, Southern California is affected by a natural cycle of fire and mudflows. Wildfires strip the mountains of vegetation, increasing the hazards from flooding and mudflows for several years afterwards. Data such as shown on this image can be used to predict both how wildfires will spread over the terrain and also how mudflows will be channeled down the canyons. The Shuttle Radar Topography Mission (SRTM), launched on February 11, 2000, uses the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. The mission was designed to collect three dimensional measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter-long (200-foot) mast, an additional C-band imaging antenna and improved tracking and navigation devices. The mission is a cooperative project between the National Aeronautics and Space Administration (NASA), the National Imagery and Mapping Agency

  10. Case study: Beauty and the Beast 3D: benefits of 3D viewing for 2D to 3D conversion

    NASA Astrophysics Data System (ADS)

    Handy Turner, Tara

    2010-02-01

    From the earliest stages of the Beauty and the Beast 3D conversion project, the advantages of accurate desk-side 3D viewing was evident. While designing and testing the 2D to 3D conversion process, the engineering team at Walt Disney Animation Studios proposed a 3D viewing configuration that not only allowed artists to "compose" stereoscopic 3D but also improved efficiency by allowing artists to instantly detect which image features were essential to the stereoscopic appeal of a shot and which features had minimal or even negative impact. At a time when few commercial 3D monitors were available and few software packages provided 3D desk-side output, the team designed their own prototype devices and collaborated with vendors to create a "3D composing" workstation. This paper outlines the display technologies explored, final choices made for Beauty and the Beast 3D, wish-lists for future development and a few rules of thumb for composing compelling 2D to 3D conversions.

  11. Mini 3D for shallow gas reconnaissance

    SciTech Connect

    Vallieres, T. des; Enns, D.; Kuehn, H.; Parron, D.; Lafet, Y.; Van Hulle, D.

    1996-12-31

    The Mini 3D project was undertaken by TOTAL and ELF with the support of CEPM (Comite d`Etudes Petrolieres et Marines) to define an economical method of obtaining 3D seismic HR data for shallow gas assessment. An experimental 3D survey was carried out with classical site survey techniques in the North Sea. From these data 19 simulations, were produced to compare different acquisition geometries ranging from dual, 600 m long cables to a single receiver. Results show that short offset, low fold and very simple streamer positioning are sufficient to give a reliable 3D image of gas charged bodies. The 3D data allow a much more accurate risk delineation than 2D HR data. Moreover on financial grounds Mini-3D is comparable in cost to a classical HR 2D survey. In view of these results, such HR 3D should now be the standard for shallow gas surveying.

  12. Chemical Structure-Biological Activity Models for Pharmacophores’ 3D-Interactions

    PubMed Central

    Putz, Mihai V.; Duda-Seiman, Corina; Duda-Seiman, Daniel; Putz, Ana-Maria; Alexandrescu, Iulia; Mernea, Maria; Avram, Speranta

    2016-01-01

    Within medicinal chemistry nowadays, the so-called pharmaco-dynamics seeks for qualitative (for understanding) and quantitative (for predicting) mechanisms/models by which given chemical structure or series of congeners actively act on biological sites either by focused interaction/therapy or by diffuse/hazardous influence. To this aim, the present review exposes three of the fertile directions in approaching the biological activity by chemical structural causes: the special computing trace of the algebraic structure-activity relationship (SPECTRAL-SAR) offering the full analytical counterpart for multi-variate computational regression, the minimal topological difference (MTD) as the revived precursor for comparative molecular field analyses (CoMFA) and comparative molecular similarity indices analysis (CoMSIA); all of these methods and algorithms were presented, discussed and exemplified on relevant chemical medicinal systems as proton pump inhibitors belonging to the 4-indolyl,2-guanidinothiazole class of derivatives blocking the acid secretion from parietal cells in the stomach, the 1-[(2-hydroxyethoxy)-methyl]-6-(phenylthio)thymine congeners’ (HEPT ligands) antiviral activity against Human Immunodeficiency Virus of first type (HIV-1) and new pharmacophores in treating severe genetic disorders (like depression and psychosis), respectively, all involving 3D pharmacophore interactions. PMID:27399692

  13. Three-dimensional pharmacophore screening for fentanyl derivatives☆

    PubMed Central

    Liu, Ming; Sun, Zhiguo; Hu, Wenxiang

    2012-01-01

    Fentanyl is a highly selective μ-opioid receptor agonist with high analgesic activity. Three-dimensional pharmacophore models were built from a set of 50 fentanyl derivatives. These were employed to elucidate ligand-receptor interactions using information derived only from the ligand structure to identify new potential lead compounds. The present studies demonstrated that three hydrophobic regions, one positive ionizable region and two hydrogen bond acceptor region sites located on the molecule seem to be essential for analgesic activity. The results of the comparative molecular field analysis model suggested that both steric and electrostatic interactions play important roles. The contributions from steric and electrostatic fields for the model were 0.621 and 0.379, respectively. The pharmacophore model provides crucial information about how well the common features of a subject molecule overlap with the hypothesis model, which is very valuable for designing and optimizing new active structures. PMID:25657673

  14. Discovery of nonsteroidal 17beta-hydroxysteroid dehydrogenase 1 inhibitors by pharmacophore-based screening of virtual compound libraries.

    PubMed

    Schuster, Daniela; Nashev, Lyubomir G; Kirchmair, Johannes; Laggner, Christian; Wolber, Gerhard; Langer, Thierry; Odermatt, Alex

    2008-07-24

    17Beta-hydroxysteroid dehydrogenase type 1 (17beta-HSD1) plays a pivotal role in the local synthesis of the most potent estrogen estradiol. Its expression is a prognostic marker for the outcome of patients with breast cancer and inhibition of 17beta-HSD1 is currently under consideration for breast cancer prevention and treatment. We aimed to identify nonsteroidal 17beta-HSD1 inhibitor scaffolds by virtual screening with pharmacophore models built from crystal structures containing steroidal compounds. The most promising model was validated by comparing predicted and experimentally determined inhibitory activities of several flavonoids. Subsequently, a virtual library of nonsteroidal compounds was screened against the 3D pharmacophore. Analysis of 14 selected compounds yielded four that inhibited the activity of human 17beta-HSD1 (IC 50 below 50 microM). Specificity assessment of identified 17beta-HSD1 inhibitors emphasized the importance of including related short-chain dehydrogenase/reductase (SDR) members to analyze off-target effects. Compound 29 displayed at least 10-fold selectivity over the related SDR enzymes tested.

  15. The discovery of novel vascular endothelial growth factor receptor tyrosine kinases inhibitors: pharmacophore modeling, virtual screening and docking studies.

    PubMed

    Yu, Hui; Wang, Zhanli; Zhang, Liangren; Zhang, Jufeng; Huang, Qian

    2007-03-01

    We have applied pharmacophore generation, database searching and docking methodologies to discover new structures for the design of vascular endothelial growth factor receptors, the tyrosine kinase insert domain-containing receptor kinase inhibitors. The chemical function based pharmacophore models were built for kinase insert domain-containing receptor kinase inhibitors from a set of 10 known inhibitors using the algorithm HipHop, which is implemented in the CATALYST software. The highest scoring HipHop model consists of four features: one hydrophobic, one hydrogen bond acceptor, one hydrogen bond donor and one ring aromatic function. Using the algorithm CatShape within CATALYST, the bound conformation of 4-amino-furo [2, 3-d] pyrimidine binding to kinase insert domain-containing receptor kinase was used to generate a shape query. A merged shape and hypothesis query that is in an appropriate alignment was then built. The combined shape and hypothesis model was used as a query to search Maybridge database for other potential lead compounds. A total of 39 compounds were retrieved as hits. The hits obtained were docked into kinase insert domain-containing receptor kinase active site. One novel potential lead was proposed based on CATALYST fit value, LigandFit docking scores, and examination of how the hit retain key interactions known to be required for kinase binding. This compound inhibited vascular endothelial growth factor stimulated kinase insert domain-containing receptor phosphorylation in human umbilical vein endothelial cells.

  16. First pharmacophore model of CCR3 receptor antagonists and its homology model-assisted, stepwise virtual screening.

    PubMed

    Jain, Vaibhav; Saravanan, Parameswaran; Arvind, Akanksha; Mohan, Chethampadi Gopi

    2011-05-01

    CCR3, a G protein-coupled receptor, plays a central role in allergic inflammation and is an important drug target for inflammatory diseases. To understand the structure-function relationship of CCR3 receptor, different computational techniques were employed, which mainly include: (i) homology modeling of CCR3 receptor, (ii) 3D-quantitative pharmacophore model of CCR3 antagonists, (iii) virtual screening of small compound databases, and (iv) finally, molecular docking at the binding site of the CCR3 receptor homology model. Pharmacophore model was developed for the first time, on a training data set of 22 CCR3 antagonists, using CATALYST HypoRefine program. Best hypothesis (Hypo1) has three different chemical features: two hydrogen-bond acceptors, one hydrophobic, and one ring aromatic. Hypo1 model was further validated using (i) 87 test set CCR3 antagonists, (ii) Cat Scramble randomization technique, and (iii) Decoy data set. Molecular docking studies were performed on modeled CCR3 receptor using 303 virtually screened hits, obtained from small compound database virtual screening. Finally, five hits were identified as potential leads against CCR3 receptor, which exhibited good estimated activities, favorable binding interactions, and high docking scores. These studies provided useful information on the structurally vital residues of CCR3 receptor involved in the antagonist binding, and their unexplored potential for the future development of potent CCR3 receptor antagonists.

  17. Quantitative structure-activity relationships (QSARs) for estrogen binding to the estrogen receptor: predictions across species.

    PubMed Central

    Tong, W; Perkins, R; Strelitz, R; Collantes, E R; Keenan, S; Welsh, W J; Branham, W S; Sheehan, D M

    1997-01-01

    The recognition of adverse effects due to environmental endocrine disruptors in humans and wildlife has focused attention on the need for predictive tools to select the most likely estrogenic chemicals from a very large number of chemicals for subsequent screening and/or testing for potential environmental toxicity. A three-dimensional quantitative structure-activity relationship (QSAR) model using comparative molecular field analysis (CoMFA) was constructed based on relative binding affinity (RBA) data from an estrogen receptor (ER) binding assay using calf uterine cytosol. The model demonstrated significant correlation of the calculated steric and electrostatic fields with RBA and yielded predictions that agreed well with experimental values over the entire range of RBA values. Analysis of the CoMFA three-dimensional contour plots revealed a consistent picture of the structural features that are largely responsible for the observed variations in RBA. Importantly, we established a correlation between the predicted RBA values for calf ER and their actual RBA values for human ER. These findings suggest a means to begin to construct a more comprehensive estrogen knowledge base by combining RBA assay data from multiple species in 3D-QSAR based predictive models, which could then be used to screen untested chemicals for their potential to bind to the ER. Another QSAR model was developed based on classical physicochemical descriptors generated using the CODESSA (Comprehensive Descriptors for Structural and Statistical Analysis) program. The predictive ability of the CoMFA model was superior to the corresponding CODESSA model. Images Figure 2. Figure 3. Figure 4. Figure 5. PMID:9353176

  18. Predicting cyclooxygenase inhibition by three-dimensional pharmacophoric profiling. Part II: Identification of enzyme inhibitors from Prasaplai, a Thai traditional medicine

    PubMed Central

    Waltenberger, Birgit; Schuster, Daniela; Paramapojn, Sompol; Gritsanapan, Wandee; Wolber, Gerhard; Rollinger, Judith M.; Stuppner, Hermann

    2011-01-01

    Prasaplai is a medicinal plant mixture that is used in Thailand to treat primary dysmenorrhea, which is characterized by painful uterine contractility caused by a significant increase of prostaglandin release. Cyclooxygenase (COX) represents a key enzyme in the formation of prostaglandins. Former studies revealed that extracts of Prasaplai inhibit COX-1 and COX-2. In this study, a comprehensive literature survey for known constituents of Prasaplai was performed. A multiconformational 3D database was created comprising 683 molecules. Virtual parallel screening using six validated pharmacophore models for COX inhibitors was performed resulting in a hit list of 166 compounds. 46 Prasaplai components with already determined COX activity were used for the external validation of this set of COX pharmacophore models. 57% of these components were classified correctly by the pharmacophore models. These findings confirm that the virtual approach provides a helpful tool (i) to unravel which molecular compounds might be responsible for the COX-inhibitory activity of Prasaplai and (ii) for the fast identification of novel COX inhibitors. PMID:20851587

  19. Nanomaterials - the Next Great Challenge for Qsar Modelers

    NASA Astrophysics Data System (ADS)

    Puzyn, Tomasz; Gajewicz, Agnieszka; Leszczynska, Danuta; Leszczynski, Jerzy

    In this final chapter a new perspective for the application of QSAR in the nanosciences is discussed. The role of nanomaterials is rapidly increasing in many aspects of everyday life. This is promoting a wide range of research needs related to both the design of new materials with required properties and performing a comprehensive risk assessment of the manufactured nanoparticles. The development of nanoscience also opens new areas for QSAR modelers. We have begun this contribution with a detailed discussion on the remarkable physical-chemical properties of nanomaterials and their specific toxicities. Both these factors should be considered as potential endpoints for further nano-QSAR studies. Then, we have highlighted the status and research needs in the area of molecular descriptors applicable to nanomaterials. Finally, we have put together currently available nano-QSAR models related to the physico-chemical endpoints of nanoparticles and their activity. Although we have observed many problems (i.e., a lack of experimental data, insufficient and inadequate descriptors), we do believe that application of QSAR methodology will significantly support nanoscience in the near future. Development of reliable nano-QSARs can be considered as the next challenging task for the QSAR community.

  20. 3-D Technology Approaches for Biological Ecologies

    NASA Astrophysics Data System (ADS)

    Liu, Liyu; Austin, Robert; U. S-China Physical-Oncology Sciences Alliance (PS-OA) Team

    Constructing three dimensional (3-D) landscapes is an inevitable issue in deep study of biological ecologies, because in whatever scales in nature, all of the ecosystems are composed by complex 3-D environments and biological behaviors. Just imagine if a 3-D technology could help complex ecosystems be built easily and mimic in vivo microenvironment realistically with flexible environmental controls, it will be a fantastic and powerful thrust to assist researchers for explorations. For years, we have been utilizing and developing different technologies for constructing 3-D micro landscapes for biophysics studies in in vitro. Here, I will review our past efforts, including probing cancer cell invasiveness with 3-D silicon based Tepuis, constructing 3-D microenvironment for cell invasion and metastasis through polydimethylsiloxane (PDMS) soft lithography, as well as explorations of optimized stenting positions for coronary bifurcation disease with 3-D wax printing and the latest home designed 3-D bio-printer. Although 3-D technologies is currently considered not mature enough for arbitrary 3-D micro-ecological models with easy design and fabrication, I hope through my talk, the audiences will be able to sense its significance and predictable breakthroughs in the near future. This work was supported by the State Key Development Program for Basic Research of China (Grant No. 2013CB837200), the National Natural Science Foundation of China (Grant No. 11474345) and the Beijing Natural Science Foundation (Grant No. 7154221).

  1. 3D change detection - Approaches and applications

    NASA Astrophysics Data System (ADS)

    Qin, Rongjun; Tian, Jiaojiao; Reinartz, Peter

    2016-12-01

    Due to the unprecedented technology development of sensors, platforms and algorithms for 3D data acquisition and generation, 3D spaceborne, airborne and close-range data, in the form of image based, Light Detection and Ranging (LiDAR) based point clouds, Digital Elevation Models (DEM) and 3D city models, become more accessible than ever before. Change detection (CD) or time-series data analysis in 3D has gained great attention due to its capability of providing volumetric dynamics to facilitate more applications and provide more accurate results. The state-of-the-art CD reviews aim to provide a comprehensive synthesis and to simplify the taxonomy of the traditional remote sensing CD techniques, which mainly sit within the boundary of 2D image/spectrum analysis, largely ignoring the particularities of 3D aspects of the data. The inclusion of 3D data for change detection (termed 3D CD), not only provides a source with different modality for analysis, but also transcends the border of traditional top-view 2D pixel/object-based analysis to highly detailed, oblique view or voxel-based geometric analysis. This paper reviews the recent developments and applications of 3D CD using remote sensing and close-range data, in support of both academia and industry researchers who seek for solutions in detecting and analyzing 3D dynamics of various objects of interest. We first describe the general considerations of 3D CD problems in different processing stages and identify CD types based on the information used, being the geometric comparison and geometric-spectral analysis. We then summarize relevant works and practices in urban, environment, ecology and civil applications, etc. Given the broad spectrum of applications and different types of 3D data, we discuss important issues in 3D CD methods. Finally, we present concluding remarks in algorithmic aspects of 3D CD.

  2. RT3D tutorials for GMS users

    SciTech Connect

    Clement, T.P.; Jones, N.L.

    1998-02-01

    RT3D (Reactive Transport in 3-Dimensions) is a computer code that solves coupled partial differential equations that describe reactive-flow and transport of multiple mobile and/or immobile species in a three dimensional saturated porous media. RT3D was developed from the single-species transport code, MT3D (DoD-1.5, 1997 version). As with MT3D, RT3D also uses the USGS groundwater flow model MODFLOW for computing spatial and temporal variations in groundwater head distribution. This report presents a set of tutorial problems that are designed to illustrate how RT3D simulations can be performed within the Department of Defense Groundwater Modeling System (GMS). GMS serves as a pre- and post-processing interface for RT3D. GMS can be used to define all the input files needed by RT3D code, and later the code can be launched from within GMS and run as a separate application. Once the RT3D simulation is completed, the solution can be imported to GMS for graphical post-processing. RT3D v1.0 supports several reaction packages that can be used for simulating different types of reactive contaminants. Each of the tutorials, described below, provides training on a different RT3D reaction package. Each reaction package has different input requirements, and the tutorials are designed to describe these differences. Furthermore, the tutorials illustrate the various options available in GMS for graphical post-processing of RT3D results. Users are strongly encouraged to complete the tutorials before attempting to use RT3D and GMS on a routine basis.

  3. Pharmacophore development for antagonists at α1 adrenergic receptor subtypes

    NASA Astrophysics Data System (ADS)

    Bremner, J. B.; Coban, B.; Griffith, R.

    1996-12-01

    Many receptors, including α1 adrenergic receptors, have a range of subtypes. This offers possibilities for the development of highly selective antagonists with potentially fewer detrimental effects. Antagonists developed for α1A receptors, for example, would have potential in the treatment of benign prostatic hyperplasia. As part of the molecular design process, structural features necessary for the selective affinity for α1A and α1B adrenergic receptors have been investigated. The molecular modelling software (particularly the Apex module) of Molecular Simulations, Inc. was used to develop pharmacophore models for these two subtypes. Low-energy conformations of a set of known antagonists were used as input, together with a classification of the receptor affinity data. The biophores proposed by the program were evaluated and pharmacophores were proposed. The pharmacophore models were validated by testing the fit of known antagonists, not included in the training set. The critical structural feature for selectivity between the α1A and α1B adrenergic receptor sites is the distance between the basic nitrogen atom and the centre of an aromatic ring system. This will be exploited in the design and synthesis of structurally new selective antagonists for these sites.

  4. Optimizing QSAR models for predicting ligand binding to the drug-metabolizing cytochrome P450 isoenzyme CYP2D6.

    PubMed

    Saraceno, Marilena; Massarelli, Ilaria; Imbriani, Marcello; James, Thomas L; Bianucci, Anna M

    2011-08-01

    The cytochrome P450 isozyme CYP2D6 binds a large variety of drugs, oxidizing many of them, and plays a crucial role in establishing in vivo drug levels, especially in multidrug regimens. The current study aimed to develop reliable predictive models for estimating the CYP2D6 inhibition properties of drug candidates. Quantitative structure-activity relationship (QSAR) studies utilizing 51 known CYP2D6 inhibitors were carried out. Performance achieved using models based on two-dimensional (2D) molecular descriptors was compared with performance using models entailing additional molecular descriptors that depend upon the three-dimensional (3D) structure of ligands. To properly compute the descriptors, all the 3D inhibitor structures were optimized such that induced-fit binding of the ligand to the active site was accommodated. CODESSA software was used to obtain equations for correlating the structural features of the ligands to their pharmacological effects on CYP2D6 (inhibition). The predictive power of all the QSAR models obtained was estimated by applying rigorous statistical criteria. To assess the robustness and predictability of the models, predictions were carried out on an additional set of known molecules (prediction set). The results showed that only models incorporating 3D descriptors in addition to 2D molecular descriptors possessed the requisite high predictive power for CYP2D6 inhibition.

  5. Exploring the potential of protein-based pharmacophore models in ligand pose prediction and ranking

    PubMed Central

    Hu, Bingjie; Lill, Markus A.

    2013-01-01

    Protein-based pharmacophore models derived from the protein binding site atoms without the inclusion of any ligand information have become more popular in virtual screening studies. However, the accuracy of protein-based pharmacophore models for reproducing the critical protein-ligand interactions has never been explicitly assessed. In this study, we used known protein-ligand contacts from a large set of experimentally determined protein-ligand complexes to assess the quality of the protein-based pharmacophores in reproducing these critical contacts. We demonstrate how these contacts can be used to optimize the pharmacophore generation procedure to produce pharmacophore models that optimally cover the known protein-ligand interactions. Finally, we explored the potential of the optimized protein-based pharmacophore models for pose prediction and pose rankings. Our results demonstrate that there are significant variations in the success of protein-based pharmacophore models to reproduce native contacts and consequently native ligand poses dependent on the details of the pharmacophore-generation process. We show that the generation of optimized protein-based pharmacophore models is a promising approach for ligand pose prediction and pose rankings. PMID:23621564

  6. 3D measurement for rapid prototyping

    NASA Astrophysics Data System (ADS)

    Albrecht, Peter; Lilienblum, Tilo; Sommerkorn, Gerd; Michaelis, Bernd

    1996-08-01

    Optical 3-D measurement is an interesting approach for rapid prototyping. On one hand it's necessary to get the 3-D data of an object and on the other hand it's necessary to check the manufactured object (quality checking). Optical 3-D measurement can realize both. Classical 3-D measurement procedures based on photogrammetry cause systematic errors at strongly curved surfaces or steps in surfaces. One possibility to reduce these errors is to calculate the 3-D coordinates from several successively taken images. Thus it's possible to get higher spatial resolution and to reduce the systematic errors at 'problem surfaces.' Another possibility is to process the measurement values by neural networks. A modified associative memory smoothes and corrects the calculated 3-D coordinates using a-priori knowledge about the measurement object.

  7. Photorefractive Polymers for Updateable 3D Displays

    DTIC Science & Technology

    2010-02-24

    Final Performance Report 3. DATES COVERED (From - To) 01-01-2007 to 11-30-2009 4. TITLE AND SUBTITLE Photorefractive Polymers for Updateable 3D ...ABSTRACT During the tenure of this project a large area updateable 3D color display has been developed for the first time using a new co-polymer...photorefractive polymers have been demonstrated. Moreover, a 6 inch × 6 inch sample was fabricated demonstrating the feasibility of making large area 3D

  8. 3D Microperfusion Model of ADPKD

    DTIC Science & Technology

    2015-10-01

    Stratasys 3D printer . PDMS was cast in the negative molds in order to create permanent biocompatible plastic masters (SmoothCast 310). All goals of task...1 AWARD NUMBER: W81XWH-14-1-0304 TITLE: 3D Microperfusion Model of ADPKD PRINCIPAL INVESTIGATOR: David L. Kaplan CONTRACTING ORGANIZATION...ADDRESS. 1. REPORT DATE October 2015 2. REPORT TYPE Annual Report 3. DATES COVERED 15 Sep 2014 - 14 Sep 2015 4. TITLE AND SUBTITLE 3D

  9. 3D carotid plaque MR Imaging

    PubMed Central

    Parker, Dennis L.

    2015-01-01

    SYNOPSIS There has been significant progress made in 3D carotid plaque magnetic resonance imaging techniques in recent years. 3D plaque imaging clearly represents the future in clinical use. With effective flow suppression techniques, choices of different contrast weighting acquisitions, and time-efficient imaging approaches, 3D plaque imaging offers flexible imaging plane and view angle analysis, large coverage, multi-vascular beds capability, and even can be used in fast screening. PMID:26610656

  10. 3-D Extensions for Trustworthy Systems

    DTIC Science & Technology

    2011-01-01

    3- D Extensions for Trustworthy Systems (Invited Paper) Ted Huffmire∗, Timothy Levin∗, Cynthia Irvine∗, Ryan Kastner† and Timothy Sherwood...address these problems, we propose an approach to trustworthy system development based on 3- D integration, an emerging chip fabrication technique in...which two or more integrated circuit dies are fabricated individually and then combined into a single stack using vertical conductive posts. With 3- D

  11. Hardware Trust Implications of 3-D Integration

    DTIC Science & Technology

    2010-12-01

    enhancing a commod- ity processor with a variety of security functions. This paper examines the 3-D design approach and provides an analysis concluding...of key components. The question addressed by this paper is, “Can a 3-D control plane provide useful secure services when it is conjoined with an...untrust- worthy computation plane?” Design-level investigation of this question yields a definite yes. This paper explores 3- D applications and their

  12. Digital holography and 3-D imaging.

    PubMed

    Banerjee, Partha; Barbastathis, George; Kim, Myung; Kukhtarev, Nickolai

    2011-03-01

    This feature issue on Digital Holography and 3-D Imaging comprises 15 papers on digital holographic techniques and applications, computer-generated holography and encryption techniques, and 3-D display. It is hoped that future work in the area leads to innovative applications of digital holography and 3-D imaging to biology and sensing, and to the development of novel nonlinear dynamic digital holographic techniques.

  13. Dimensional accuracy of 3D printed vertebra

    NASA Astrophysics Data System (ADS)

    Ogden, Kent; Ordway, Nathaniel; Diallo, Dalanda; Tillapaugh-Fay, Gwen; Aslan, Can

    2014-03-01

    3D printer applications in the biomedical sciences and medical imaging are expanding and will have an increasing impact on the practice of medicine. Orthopedic and reconstructive surgery has been an obvious area for development of 3D printer applications as the segmentation of bony anatomy to generate printable models is relatively straightforward. There are important issues that should be addressed when using 3D printed models for applications that may affect patient care; in particular the dimensional accuracy of the printed parts needs to be high to avoid poor decisions being made prior to surgery or therapeutic procedures. In this work, the dimensional accuracy of 3D printed vertebral bodies derived from CT data for a cadaver spine is compared with direct measurements on the ex-vivo vertebra and with measurements made on the 3D rendered vertebra using commercial 3D image processing software. The vertebra was printed on a consumer grade 3D printer using an additive print process using PLA (polylactic acid) filament. Measurements were made for 15 different anatomic features of the vertebral body, including vertebral body height, endplate width and depth, pedicle height and width, and spinal canal width and depth, among others. It is shown that for the segmentation and printing process used, the results of measurements made on the 3D printed vertebral body are substantially the same as those produced by direct measurement on the vertebra and measurements made on the 3D rendered vertebra.

  14. QSAR Modelling of CYP3A4 Inhibition as a Screening Tool in the Context of DrugDrug Interaction Studies.

    PubMed

    Hamon, Véronique; Horvath, Dragos; Gaudin, Cédric; Desrivot, Julie; Junges, Céline; Arrault, Alban; Bertrand, Marc; Vayer, Philippe

    2012-09-01

    Drugdrug interaction potential (DDI), especially cytochrome P450 (CYP) 3A4 inhibition potential, is one of the most important parameters to be optimized before preclinical and clinical pharmaceutical development as regard to the number of marketed drug metabolized mainly by this CYP and potentially co-administered with the future drug. The present study aims to develop in silico models for CYP3A4 inhibition prediction to help medicinal chemists during the discovery phase and even before the synthesis of new chemical entities (NCEs), focusing on NCEs devoid of any inhibitory potential toward this CYP. In order to find a relevant relationship between CYP3A4 inhibition and chemical features of the screened compounds, we applied a genetic-algorithm-based QSAR exploratory tool SQS (Stochastic QSAR Sampler) in combination with different description approaches comprising alignment-independent Volsurf descriptors, ISIDA fragments and Topological Fuzzy Pharmacophore Triplets. The experimental data used to build models were extracted from an in-house database. We derived a model with good prediction ability that was confirmed on both newly synthesized compound and public dataset retrieved from Pubchem database. This model is a promising efficient tool for filtering out potentially problematic compounds.

  15. FastScript3D - A Companion to Java 3D

    NASA Technical Reports Server (NTRS)

    Koenig, Patti

    2005-01-01

    FastScript3D is a computer program, written in the Java 3D(TM) programming language, that establishes an alternative language that helps users who lack expertise in Java 3D to use Java 3D for constructing three-dimensional (3D)-appearing graphics. The FastScript3D language provides a set of simple, intuitive, one-line text-string commands for creating, controlling, and animating 3D models. The first word in a string is the name of a command; the rest of the string contains the data arguments for the command. The commands can also be used as an aid to learning Java 3D. Developers can extend the language by adding custom text-string commands. The commands can define new 3D objects or load representations of 3D objects from files in formats compatible with such other software systems as X3D. The text strings can be easily integrated into other languages. FastScript3D facilitates communication between scripting languages [which enable programming of hyper-text markup language (HTML) documents to interact with users] and Java 3D. The FastScript3D language can be extended and customized on both the scripting side and the Java 3D side.

  16. Insights on Cytochrome P450 Enzymes and Inhibitors Obtained Through QSAR Studies

    PubMed Central

    Sridhar, Jayalakshmi; Liu, Jiawang; Foroozesh, Maryam; Stevens, Cheryl L. Klein

    2013-01-01

    The cytochrome P450 (CYP) superfamily of heme enzymes play an important role in the metabolism of a large number of endogenous and exogenous compounds, including most of the drugs currently on the market. Inhibitors of CYP enzymes have important roles in the treatment of several disease conditions such as numerous cancers and fungal infections in addition to their critical role in drug-drug interactions. Structure activity relationships (SAR), and three-dimensional quantitative structure activity relationships (3D-QSAR) represent important tools in understanding the interactions of the inhibitors with the active sites of the CYP enzymes. A comprehensive account of the QSAR studies on the major human CYPs 1A1, 1A2, 1B1, 2A6, 2B6, 2C9, 2C19, 2D6, 2E1, 3A4 and a few other CYPs are detailed in this review which will provide us with an insight into the individual/common characteristics of the active sites of these enzymes and the enzyme-inhibitor interactions. PMID:22864238

  17. Construction of 4D-QSAR models for use in the design of novel p38-MAPK inhibitors.

    PubMed

    Romeiro, Nelilma Correia; Albuquerque, Magaly Girão; de Alencastro, Ricardo Bicca; Ravi, Malini; Hopfinger, Anton J

    2005-06-01

    The p38-mitogen-activated protein kinase (p38-MAPK) plays a key role in lipopolysaccharide-induced tumor necrosis factor-alpha (TNF-alpha) and interleukin-1 (IL-1) release during the inflammatory process, emerging as an attractive target for new anti-inflammatory agents. Four-dimensional quantitative structure-activity relationship (4D-QSAR) analysis [Hopfinger et al., J. Am. Chem. Soc., 119 (1997) 10509] was applied to a series of 33 (a training set of 28 and a test set of 5) pyridinyl-imidazole and pyrimidinyl-imidazole inhibitors of p38-MAPK, with IC50 ranging from 0.11 to 2100 nM [Liverton et al., J. Med. Chem., 42 (1999) 2180]. Five thousand conformations of each analogue were sampled from a molecular dynamics simulation (MDS) during 50 ps at a constant temperature of 303 K. Each conformation was placed in a 2 angstroms grid cell lattice for each of three trial alignments. 4D-QSAR models were constructed by genetic algorithm (GA) optimization and partial least squares (PLS) fitting, and evaluated by leave-one-out cross-validation technique. In the best models, with three to six terms, the adjusted cross-validated squared correlation coefficients, Q2adj, ranged from 0.67 to 0.85. Model D (Q2adj = 0.84) was identified as the most robust model from alignment 1, and it is representative of the other best models. This model encompasses new molecular regions as containing pharmacophore sites, such as the amino-benzyl moiety of pyrimidine analogs and the N1-substituent in the imidazole ring. These regions of the ligands should be further explored to identify better anti-inflammatory inhibitors of p38-MAPK.

  18. Construction of 4D-QSAR Models for Use in the Design of Novel p38-MAPK Inhibitors

    NASA Astrophysics Data System (ADS)

    Romeiro, Nelilma Correia; Albuquerque, Magaly Girão; de Alencastro, Ricardo Bicca; Ravi, Malini; Hopfinger, Anton J.

    2005-06-01

    The p38-mitogen-activated protein kinase (p38-MAPK) plays a key role in lipopolysaccharide-induced tumor necrosis factor-α (TNF-α) and interleukin-1 (IL-1) release during the inflammatory process, emerging as an attractive target for new anti-inflammatory agents. Four-dimensional quantitative structure-activity relationship (4D-QSAR) analysis [Hopfinger et al., J. Am. Chem. Soc., 119 (1997) 10509] was applied to a series of 33 (a training set of 28 and a test set of 5) pyridinyl-imidazole and pyrimidinyl-imidazole inhibitors of p38-MAPK, with IC50 ranging from 0.11 to 2100 nM [Liverton et al., J. Med. Chem., 42 (1999) 2180]. Five thousand conformations of each analogue were sampled from a molecular dynamics simulation (MDS) during 50 ps at a constant temperature of 303 K. Each conformation was placed in a 2 Å grid cell lattice for each of three trial alignments. 4D-QSAR models were constructed by genetic algorithm (GA) optimization and partial least squares (PLS) fitting, and evaluated by leave-one-out cross-validation technique. In the best models, with three to six terms, the adjusted cross-validated squared correlation coefficients, Q 2 adj, ranged from 0.67 to 0.85. Model D ( Q 2 adj = 0.84) was identified as the most robust model from alignment 1, and it is representative of the other best models. This model encompasses new molecular regions as containing pharmacophore sites, such as the amino-benzyl moiety of pyrimidine analogs and the N1-substituent in the imidazole ring. These regions of the ligands should be further explored to identify better anti-inflammatory inhibitors of p38-MAPK.

  19. First Pharmacophore-Based Identification of Androgen Receptor Down-regulating Agents: Discovery of Potent Anti-Prostate Cancer Agents

    PubMed Central

    Purushottamachar, Puranik; Khandelwal, Aakanksha; Chopra, Pankaj; Maheshwari, Neha; Gediya, Lalji K; Vasaitis, Tadas S.; Bruno, Robert; Clement, Omoshile O.; Njar, Vincent C. O.

    2007-01-01

    A qualitative 3D pharmacophore model (a common feature based model or Catalyst HipHop algorithm) was developed for well known natural product androgen receptor down-regulating agents (ARDAs). The four common chemical features identified included: one hydrophobic group, one ring aromatic group and two hydrogen bond acceptors. This model served as a template in virtual screening of the Maybridge and NCI databases that resulted in identification of 6 new ARDAs (EC50 values 17.5 – 212 μM). Five of these molecules strongly inhibited the growth of human prostate LNCaP cells. These novel compounds may be used as leads to develop other novel anti-prostate cancer agents. PMID:17383188

  20. 3D ultrafast ultrasound imaging in vivo.

    PubMed

    Provost, Jean; Papadacci, Clement; Arango, Juan Esteban; Imbault, Marion; Fink, Mathias; Gennisson, Jean-Luc; Tanter, Mickael; Pernot, Mathieu

    2014-10-07

    Very high frame rate ultrasound imaging has recently allowed for the extension of the applications of echography to new fields of study such as the functional imaging of the brain, cardiac electrophysiology, and the quantitative imaging of the intrinsic mechanical properties of tumors, to name a few, non-invasively and in real time. In this study, we present the first implementation of Ultrafast Ultrasound Imaging in 3D based on the use of either diverging or plane waves emanating from a sparse virtual array located behind the probe. It achieves high contrast and resolution while maintaining imaging rates of thousands of volumes per second. A customized portable ultrasound system was developed to sample 1024 independent channels and to drive a 32  ×  32 matrix-array probe. Its ability to track in 3D transient phenomena occurring in the millisecond range within a single ultrafast acquisition was demonstrated for 3D Shear-Wave Imaging, 3D Ultrafast Doppler Imaging, and, finally, 3D Ultrafast combined Tissue and Flow Doppler Imaging. The propagation of shear waves was tracked in a phantom and used to characterize its stiffness. 3D Ultrafast Doppler was used to obtain 3D maps of Pulsed Doppler, Color Doppler, and Power Doppler quantities in a single acquisition and revealed, at thousands of volumes per second, the complex 3D flow patterns occurring in the ventricles of the human heart during an entire cardiac cycle, as well as the 3D in vivo interaction of blood flow and wall motion during the pulse wave in the carotid at the bifurcation. This study demonstrates the potential of 3D Ultrafast Ultrasound Imaging for the 3D mapping of stiffness, tissue motion, and flow in humans in vivo and promises new clinical applications of ultrasound with reduced intra--and inter-observer variability.

  1. 3D ultrafast ultrasound imaging in vivo

    NASA Astrophysics Data System (ADS)

    Provost, Jean; Papadacci, Clement; Esteban Arango, Juan; Imbault, Marion; Fink, Mathias; Gennisson, Jean-Luc; Tanter, Mickael; Pernot, Mathieu

    2014-10-01

    Very high frame rate ultrasound imaging has recently allowed for the extension of the applications of echography to new fields of study such as the functional imaging of the brain, cardiac electrophysiology, and the quantitative imaging of the intrinsic mechanical properties of tumors, to name a few, non-invasively and in real time. In this study, we present the first implementation of Ultrafast Ultrasound Imaging in 3D based on the use of either diverging or plane waves emanating from a sparse virtual array located behind the probe. It achieves high contrast and resolution while maintaining imaging rates of thousands of volumes per second. A customized portable ultrasound system was developed to sample 1024 independent channels and to drive a 32  ×  32 matrix-array probe. Its ability to track in 3D transient phenomena occurring in the millisecond range within a single ultrafast acquisition was demonstrated for 3D Shear-Wave Imaging, 3D Ultrafast Doppler Imaging, and, finally, 3D Ultrafast combined Tissue and Flow Doppler Imaging. The propagation of shear waves was tracked in a phantom and used to characterize its stiffness. 3D Ultrafast Doppler was used to obtain 3D maps of Pulsed Doppler, Color Doppler, and Power Doppler quantities in a single acquisition and revealed, at thousands of volumes per second, the complex 3D flow patterns occurring in the ventricles of the human heart during an entire cardiac cycle, as well as the 3D in vivo interaction of blood flow and wall motion during the pulse wave in the carotid at the bifurcation. This study demonstrates the potential of 3D Ultrafast Ultrasound Imaging for the 3D mapping of stiffness, tissue motion, and flow in humans in vivo and promises new clinical applications of ultrasound with reduced intra—and inter-observer variability.

  2. An aerial 3D printing test mission

    NASA Astrophysics Data System (ADS)

    Hirsch, Michael; McGuire, Thomas; Parsons, Michael; Leake, Skye; Straub, Jeremy

    2016-05-01

    This paper provides an overview of an aerial 3D printing technology, its development and its testing. This technology is potentially useful in its own right. In addition, this work advances the development of a related in-space 3D printing technology. A series of aerial 3D printing test missions, used to test the aerial printing technology, are discussed. Through completing these test missions, the design for an in-space 3D printer may be advanced. The current design for the in-space 3D printer involves focusing thermal energy to heat an extrusion head and allow for the extrusion of molten print material. Plastics can be used as well as composites including metal, allowing for the extrusion of conductive material. A variety of experiments will be used to test this initial 3D printer design. High altitude balloons will be used to test the effects of microgravity on 3D printing, as well as parabolic flight tests. Zero pressure balloons can be used to test the effect of long 3D printing missions subjected to low temperatures. Vacuum chambers will be used to test 3D printing in a vacuum environment. The results will be used to adapt a current prototype of an in-space 3D printer. Then, a small scale prototype can be sent into low-Earth orbit as a 3-U cube satellite. With the ability to 3D print in space demonstrated, future missions can launch production hardware through which the sustainability and durability of structures in space will be greatly improved.

  3. Internally defined distances in 3D-quantitative structure-activity relationships

    NASA Astrophysics Data System (ADS)

    Klein, Christian Th.; Kaiblinger, Norbert; Wolschann, Peter

    2002-02-01

    A new type of 3D-QSAR descriptors is introduced. For each molecule under consideration an internal coordinate system is defined relative to molecular points, such as positions of atoms in the molecule or centers of mass or certain substructures. From the origin of this system distances to the solvent accessible surface are calculated at defined spherical coordinate angles, θ and φ. The distances represent steric features, while the molecular electrostatic potentials at the intersection points with the surface represent the electrostatic contributions. The approach is called IDA (internal distances analysis). Matrices obtained by varying the spherical coordinate angles by fixed increments are correlated with the biological activity by partial least squares (PLS). The descriptors, tested with the benchmark steroids and an also well characterized benzodiazepine data set, turn out to be highly predictive. Additionally, they share the advantage of grid-based methods that the obtained models can be visualized, and thus be directly used in a rational drug design approach.

  4. Using Toxicological Evidence from QSAR Models in Practice

    EPA Science Inventory

    The new generation of QSAR models provides supporting documentation in addition to the predicted toxicological value. Such information enables the toxicologist to explore the properties of chemical substances and to review and increase the reliability of toxicity predictions. Thi...

  5. SEDIMENT-ASSOCIATED REACTIONS OF AROMATIC AMINES: QSAR DEVELOPMENT

    EPA Science Inventory

    Despite the common occurrence of the aromatic amine functional group in environmental contaminants, few quantitative structure-activity relationships (QSARs) have been developed to predict sorption kinetics for aromatic amines in natural soils and sediments. Towards the goal of d...

  6. Integration of real-time 3D image acquisition and multiview 3D display

    NASA Astrophysics Data System (ADS)

    Zhang, Zhaoxing; Geng, Zheng; Li, Tuotuo; Li, Wei; Wang, Jingyi; Liu, Yongchun

    2014-03-01

    Seamless integration of 3D acquisition and 3D display systems offers enhanced experience in 3D visualization of the real world objects or scenes. The vivid representation of captured 3D objects displayed on a glasses-free 3D display screen could bring the realistic viewing experience to viewers as if they are viewing real-world scene. Although the technologies in 3D acquisition and 3D display have advanced rapidly in recent years, effort is lacking in studying the seamless integration of these two different aspects of 3D technologies. In this paper, we describe our recent progress on integrating a light-field 3D acquisition system and an autostereoscopic multiview 3D display for real-time light field capture and display. This paper focuses on both the architecture design and the implementation of the hardware and the software of this integrated 3D system. A prototype of the integrated 3D system is built to demonstrate the real-time 3D acquisition and 3D display capability of our proposed system.

  7. Immersive 3D Geovisualization in Higher Education

    ERIC Educational Resources Information Center

    Philips, Andrea; Walz, Ariane; Bergner, Andreas; Graeff, Thomas; Heistermann, Maik; Kienzler, Sarah; Korup, Oliver; Lipp, Torsten; Schwanghart, Wolfgang; Zeilinger, Gerold

    2015-01-01

    In this study, we investigate how immersive 3D geovisualization can be used in higher education. Based on MacEachren and Kraak's geovisualization cube, we examine the usage of immersive 3D geovisualization and its usefulness in a research-based learning module on flood risk, called GEOSimulator. Results of a survey among participating students…

  8. A 3D Geostatistical Mapping Tool

    SciTech Connect

    Weiss, W. W.; Stevenson, Graig; Patel, Ketan; Wang, Jun

    1999-02-09

    This software provides accurate 3D reservoir modeling tools and high quality 3D graphics for PC platforms enabling engineers and geologists to better comprehend reservoirs and consequently improve their decisions. The mapping algorithms are fractals, kriging, sequential guassian simulation, and three nearest neighbor methods.

  9. 3D Printing. What's the Harm?

    ERIC Educational Resources Information Center

    Love, Tyler S.; Roy, Ken

    2016-01-01

    Health concerns from 3D printing were first documented by Stephens, Azimi, Orch, and Ramos (2013), who found that commercially available 3D printers were producing hazardous levels of ultrafine particles (UFPs) and volatile organic compounds (VOCs) when plastic materials were melted through the extruder. UFPs are particles less than 100 nanometers…

  10. Topology dictionary for 3D video understanding.

    PubMed

    Tung, Tony; Matsuyama, Takashi

    2012-08-01

    This paper presents a novel approach that achieves 3D video understanding. 3D video consists of a stream of 3D models of subjects in motion. The acquisition of long sequences requires large storage space (2 GB for 1 min). Moreover, it is tedious to browse data sets and extract meaningful information. We propose the topology dictionary to encode and describe 3D video content. The model consists of a topology-based shape descriptor dictionary which can be generated from either extracted patterns or training sequences. The model relies on 1) topology description and classification using Reeb graphs, and 2) a Markov motion graph to represent topology change states. We show that the use of Reeb graphs as the high-level topology descriptor is relevant. It allows the dictionary to automatically model complex sequences, whereas other strategies would require prior knowledge on the shape and topology of the captured subjects. Our approach serves to encode 3D video sequences, and can be applied for content-based description and summarization of 3D video sequences. Furthermore, topology class labeling during a learning process enables the system to perform content-based event recognition. Experiments were carried out on various 3D videos. We showcase an application for 3D video progressive summarization using the topology dictionary.

  11. 3D elastic control for mobile devices.

    PubMed

    Hachet, Martin; Pouderoux, Joachim; Guitton, Pascal

    2008-01-01

    To increase the input space of mobile devices, the authors developed a proof-of-concept 3D elastic controller that easily adapts to mobile devices. This embedded device improves the completion of high-level interaction tasks such as visualization of large documents and navigation in 3D environments. It also opens new directions for tomorrow's mobile applications.

  12. 3D Printing of Molecular Models

    ERIC Educational Resources Information Center

    Gardner, Adam; Olson, Arthur

    2016-01-01

    Physical molecular models have played a valuable role in our understanding of the invisible nano-scale world. We discuss 3D printing and its use in producing models of the molecules of life. Complex biomolecular models, produced from 3D printed parts, can demonstrate characteristics of molecular structure and function, such as viral self-assembly,…

  13. 3D Printed Block Copolymer Nanostructures

    ERIC Educational Resources Information Center

    Scalfani, Vincent F.; Turner, C. Heath; Rupar, Paul A.; Jenkins, Alexander H.; Bara, Jason E.

    2015-01-01

    The emergence of 3D printing has dramatically advanced the availability of tangible molecular and extended solid models. Interestingly, there are few nanostructure models available both commercially and through other do-it-yourself approaches such as 3D printing. This is unfortunate given the importance of nanotechnology in science today. In this…

  14. Infrastructure for 3D Imaging Test Bed

    DTIC Science & Technology

    2007-05-11

    analysis. (c.) Real time detection & analysis of human gait: using a video camera we capture walking human silhouette for pattern modeling and gait ... analysis . Fig. 5 shows the scanning result result that is fed into a Geo-magic software tool for 3D meshing. Fig. 5: 3D scanning result In

  15. Wow! 3D Content Awakens the Classroom

    ERIC Educational Resources Information Center

    Gordon, Dan

    2010-01-01

    From her first encounter with stereoscopic 3D technology designed for classroom instruction, Megan Timme, principal at Hamilton Park Pacesetter Magnet School in Dallas, sensed it could be transformative. Last spring, when she began pilot-testing 3D content in her third-, fourth- and fifth-grade classrooms, Timme wasn't disappointed. Students…

  16. Stereo 3-D Vision in Teaching Physics

    ERIC Educational Resources Information Center

    Zabunov, Svetoslav

    2012-01-01

    Stereo 3-D vision is a technology used to present images on a flat surface (screen, paper, etc.) and at the same time to create the notion of three-dimensional spatial perception of the viewed scene. A great number of physical processes are much better understood when viewed in stereo 3-D vision compared to standard flat 2-D presentation. The…

  17. Pathways for Learning from 3D Technology

    ERIC Educational Resources Information Center

    Carrier, L. Mark; Rab, Saira S.; Rosen, Larry D.; Vasquez, Ludivina; Cheever, Nancy A.

    2012-01-01

    The purpose of this study was to find out if 3D stereoscopic presentation of information in a movie format changes a viewer's experience of the movie content. Four possible pathways from 3D presentation to memory and learning were considered: a direct connection based on cognitive neuroscience research; a connection through "immersion"…

  18. 3D, or Not to Be?

    ERIC Educational Resources Information Center

    Norbury, Keith

    2012-01-01

    It may be too soon for students to be showing up for class with popcorn and gummy bears, but technology similar to that behind the 3D blockbuster movie "Avatar" is slowly finding its way into college classrooms. 3D classroom projectors are taking students on fantastic voyages inside the human body, to the ruins of ancient Greece--even to faraway…

  19. Static & Dynamic Response of 3D Solids

    SciTech Connect

    Lin, Jerry

    1996-07-15

    NIKE3D is a large deformations 3D finite element code used to obtain the resulting displacements and stresses from multi-body static and dynamic structural thermo-mechanics problems with sliding interfaces. Many nonlinear and temperature dependent constitutive models are available.

  20. BEAMS3D Neutral Beam Injection Model

    SciTech Connect

    Lazerson, Samuel

    2014-04-14

    With the advent of applied 3D fi elds in Tokamaks and modern high performance stellarators, a need has arisen to address non-axisymmetric effects on neutral beam heating and fueling. We report on the development of a fully 3D neutral beam injection (NBI) model, BEAMS3D, which addresses this need by coupling 3D equilibria to a guiding center code capable of modeling neutral and charged particle trajectories across the separatrix and into the plasma core. Ionization, neutralization, charge-exchange, viscous velocity reduction, and pitch angle scattering are modeled with the ADAS atomic physics database [1]. Benchmark calculations are presented to validate the collisionless particle orbits, neutral beam injection model, frictional drag, and pitch angle scattering effects. A calculation of neutral beam heating in the NCSX device is performed, highlighting the capability of the code to handle 3D magnetic fields.

  1. Fabrication of 3D Silicon Sensors

    SciTech Connect

    Kok, A.; Hansen, T.E.; Hansen, T.A.; Lietaer, N.; Summanwar, A.; Kenney, C.; Hasi, J.; Da Via, C.; Parker, S.I.; /Hawaii U.

    2012-06-06

    Silicon sensors with a three-dimensional (3-D) architecture, in which the n and p electrodes penetrate through the entire substrate, have many advantages over planar silicon sensors including radiation hardness, fast time response, active edge and dual readout capabilities. The fabrication of 3D sensors is however rather complex. In recent years, there have been worldwide activities on 3D fabrication. SINTEF in collaboration with Stanford Nanofabrication Facility have successfully fabricated the original (single sided double column type) 3D detectors in two prototype runs and the third run is now on-going. This paper reports the status of this fabrication work and the resulted yield. The work of other groups such as the development of double sided 3D detectors is also briefly reported.

  2. 2D/3D switchable displays

    NASA Astrophysics Data System (ADS)

    Dekker, T.; de Zwart, S. T.; Willemsen, O. H.; Hiddink, M. G. H.; IJzerman, W. L.

    2006-02-01

    A prerequisite for a wide market acceptance of 3D displays is the ability to switch between 3D and full resolution 2D. In this paper we present a robust and cost effective concept for an auto-stereoscopic switchable 2D/3D display. The display is based on an LCD panel, equipped with switchable LC-filled lenticular lenses. We will discuss 3D image quality, with the focus on display uniformity. We show that slanting the lenticulars in combination with a good lens design can minimize non-uniformities in our 20" 2D/3D monitors. Furthermore, we introduce fractional viewing systems as a very robust concept to further improve uniformity in the case slanting the lenticulars and optimizing the lens design are not sufficient. We will discuss measurements and numerical simulations of the key optical characteristics of this display. Finally, we discuss 2D image quality, the switching characteristics and the residual lens effect.

  3. 6D Interpretation of 3D Gravity

    NASA Astrophysics Data System (ADS)

    Herfray, Yannick; Krasnov, Kirill; Scarinci, Carlos

    2017-02-01

    We show that 3D gravity, in its pure connection formulation, admits a natural 6D interpretation. The 3D field equations for the connection are equivalent to 6D Hitchin equations for the Chern–Simons 3-form in the total space of the principal bundle over the 3-dimensional base. Turning this construction around one gets an explanation of why the pure connection formulation of 3D gravity exists. More generally, we interpret 3D gravity as the dimensional reduction of the 6D Hitchin theory. To this end, we show that any \\text{SU}(2) invariant closed 3-form in the total space of the principal \\text{SU}(2) bundle can be parametrised by a connection together with a 2-form field on the base. The dimensional reduction of the 6D Hitchin theory then gives rise to 3D gravity coupled to a topological 2-form field.

  4. Biocompatible 3D Matrix with Antimicrobial Properties.

    PubMed

    Ion, Alberto; Andronescu, Ecaterina; Rădulescu, Dragoș; Rădulescu, Marius; Iordache, Florin; Vasile, Bogdan Ștefan; Surdu, Adrian Vasile; Albu, Madalina Georgiana; Maniu, Horia; Chifiriuc, Mariana Carmen; Grumezescu, Alexandru Mihai; Holban, Alina Maria

    2016-01-20

    The aim of this study was to develop, characterize and assess the biological activity of a new regenerative 3D matrix with antimicrobial properties, based on collagen (COLL), hydroxyapatite (HAp), β-cyclodextrin (β-CD) and usnic acid (UA). The prepared 3D matrix was characterized by Scanning Electron Microscopy (SEM), Fourier Transform Infrared Microscopy (FT-IRM), Transmission Electron Microscopy (TEM), and X-ray Diffraction (XRD). In vitro qualitative and quantitative analyses performed on cultured diploid cells demonstrated that the 3D matrix is biocompatible, allowing the normal development and growth of MG-63 osteoblast-like cells and exhibited an antimicrobial effect, especially on the Staphylococcus aureus strain, explained by the particular higher inhibitory activity of usnic acid (UA) against Gram positive bacterial strains. Our data strongly recommend the obtained 3D matrix to be used as a successful alternative for the fabrication of three dimensional (3D) anti-infective regeneration matrix for bone tissue engineering.

  5. Quon 3D language for quantum information

    PubMed Central

    Liu, Zhengwei; Wozniakowski, Alex; Jaffe, Arthur M.

    2017-01-01

    We present a 3D topological picture-language for quantum information. Our approach combines charged excitations carried by strings, with topological properties that arise from embedding the strings in the interior of a 3D manifold with boundary. A quon is a composite that acts as a particle. Specifically, a quon is a hemisphere containing a neutral pair of open strings with opposite charge. We interpret multiquons and their transformations in a natural way. We obtain a type of relation, a string–genus “joint relation,” involving both a string and the 3D manifold. We use the joint relation to obtain a topological interpretation of the C∗-Hopf algebra relations, which are widely used in tensor networks. We obtain a 3D representation of the controlled NOT (CNOT) gate that is considerably simpler than earlier work, and a 3D topological protocol for teleportation. PMID:28167790

  6. 3D Ultrafast Ultrasound Imaging In Vivo

    PubMed Central

    Provost, Jean; Papadacci, Clement; Arango, Juan Esteban; Imbault, Marion; Gennisson, Jean-Luc; Tanter, Mickael; Pernot, Mathieu

    2014-01-01

    Very high frame rate ultrasound imaging has recently allowed for the extension of the applications of echography to new fields of study such as the functional imaging of the brain, cardiac electrophysiology, and the quantitative real-time imaging of the intrinsic mechanical properties of tumors, to name a few, non-invasively and in real time. In this study, we present the first implementation of Ultrafast Ultrasound Imaging in three dimensions based on the use of either diverging or plane waves emanating from a sparse virtual array located behind the probe. It achieves high contrast and resolution while maintaining imaging rates of thousands of volumes per second. A customized portable ultrasound system was developed to sample 1024 independent channels and to drive a 32×32 matrix-array probe. Its capability to track in 3D transient phenomena occurring in the millisecond range within a single ultrafast acquisition was demonstrated for 3-D Shear-Wave Imaging, 3-D Ultrafast Doppler Imaging and finally 3D Ultrafast combined Tissue and Flow Doppler. The propagation of shear waves was tracked in a phantom and used to characterize its stiffness. 3-D Ultrafast Doppler was used to obtain 3-D maps of Pulsed Doppler, Color Doppler, and Power Doppler quantities in a single acquisition and revealed, for the first time, the complex 3-D flow patterns occurring in the ventricles of the human heart during an entire cardiac cycle, and the 3-D in vivo interaction of blood flow and wall motion during the pulse wave in the carotid at the bifurcation. This study demonstrates the potential of 3-D Ultrafast Ultrasound Imaging for the 3-D real-time mapping of stiffness, tissue motion, and flow in humans in vivo and promises new clinical applications of ultrasound with reduced intra- and inter-observer variability. PMID:25207828

  7. 3D Visualization Development of SIUE Campus

    NASA Astrophysics Data System (ADS)

    Nellutla, Shravya

    Geographic Information Systems (GIS) has progressed from the traditional map-making to the modern technology where the information can be created, edited, managed and analyzed. Like any other models, maps are simplified representations of real world. Hence visualization plays an essential role in the applications of GIS. The use of sophisticated visualization tools and methods, especially three dimensional (3D) modeling, has been rising considerably due to the advancement of technology. There are currently many off-the-shelf technologies available in the market to build 3D GIS models. One of the objectives of this research was to examine the available ArcGIS and its extensions for 3D modeling and visualization and use them to depict a real world scenario. Furthermore, with the advent of the web, a platform for accessing and sharing spatial information on the Internet, it is possible to generate interactive online maps. Integrating Internet capacity with GIS functionality redefines the process of sharing and processing the spatial information. Enabling a 3D map online requires off-the-shelf GIS software, 3D model builders, web server, web applications and client server technologies. Such environments are either complicated or expensive because of the amount of hardware and software involved. Therefore, the second objective of this research was to investigate and develop simpler yet cost-effective 3D modeling approach that uses available ArcGIS suite products and the free 3D computer graphics software for designing 3D world scenes. Both ArcGIS Explorer and ArcGIS Online will be used to demonstrate the way of sharing and distributing 3D geographic information on the Internet. A case study of the development of 3D campus for the Southern Illinois University Edwardsville is demonstrated.

  8. Pathways for Learning from 3D Technology

    PubMed Central

    Carrier, L. Mark; Rab, Saira S.; Rosen, Larry D.; Vasquez, Ludivina; Cheever, Nancy A.

    2016-01-01

    The purpose of this study was to find out if 3D stereoscopic presentation of information in a movie format changes a viewer's experience of the movie content. Four possible pathways from 3D presentation to memory and learning were considered: a direct connection based on cognitive neuroscience research; a connection through "immersion" in that 3D presentations could provide additional sensorial cues (e.g., depth cues) that lead to a higher sense of being surrounded by the stimulus; a connection through general interest such that 3D presentation increases a viewer’s interest that leads to greater attention paid to the stimulus (e.g., "involvement"); and a connection through discomfort, with the 3D goggles causing discomfort that interferes with involvement and thus with memory. The memories of 396 participants who viewed two-dimensional (2D) or 3D movies at movie theaters in Southern California were tested. Within three days of viewing a movie, participants filled out an online anonymous questionnaire that queried them about their movie content memories, subjective movie-going experiences (including emotional reactions and "presence") and demographic backgrounds. The responses to the questionnaire were subjected to path analyses in which several different links between 3D presentation to memory (and other variables) were explored. The results showed there were no effects of 3D presentation, either directly or indirectly, upon memory. However, the largest effects of 3D presentation were on emotions and immersion, with 3D presentation leading to reduced positive emotions, increased negative emotions and lowered immersion, compared to 2D presentations. PMID:28078331

  9. The psychology of the 3D experience

    NASA Astrophysics Data System (ADS)

    Janicke, Sophie H.; Ellis, Andrew

    2013-03-01

    With 3D televisions expected to reach 50% home saturation as early as 2016, understanding the psychological mechanisms underlying the user response to 3D technology is critical for content providers, educators and academics. Unfortunately, research examining the effects of 3D technology has not kept pace with the technology's rapid adoption, resulting in large-scale use of a technology about which very little is actually known. Recognizing this need for new research, we conducted a series of studies measuring and comparing many of the variables and processes underlying both 2D and 3D media experiences. In our first study, we found narratives within primetime dramas had the power to shift viewer attitudes in both 2D and 3D settings. However, we found no difference in persuasive power between 2D and 3D content. We contend this lack of effect was the result of poor conversion quality and the unique demands of 3D production. In our second study, we found 3D technology significantly increased enjoyment when viewing sports content, yet offered no added enjoyment when viewing a movie trailer. The enhanced enjoyment of the sports content was shown to be the result of heightened emotional arousal and attention in the 3D condition. We believe the lack of effect found for the movie trailer may be genre-related. In our final study, we found 3D technology significantly enhanced enjoyment of two video games from different genres. The added enjoyment was found to be the result of an increased sense of presence.

  10. An Insight into the Pharmacophores of Phosphodiesterase-5 Inhibitors from Synthetic and Crystal Structural Studies

    SciTech Connect

    Chen,G.; Wang, H.; Robinson, H.; Cai, J.; Wan, Y.; Ke, H.

    2008-01-01

    Selective inhibitors of cyclic nucleotide phosphodiesterase-5 (PDE5) have been used as drugs for treatment of male erectile dysfunction and pulmonary hypertension. An insight into the pharmacophores of PDE5 inhibitors is essential for development of second generation of PDE5 inhibitors, but has not been completely illustrated. Here we report the synthesis of a new class of the sildenafil derivatives and a crystal structure of the PDE5 catalytic domain in complex with 5-(2-ethoxy-5-(sulfamoyl)-3-thienyl)-1-methyl-3-propyl-1, 6-dihydro-7H-pyrazolo[4, 3-d]pyrimidin-7-one (12). Inhibitor 12 induces conformational change of the H-loop (residues 660-683), which is different from any of the known PDE5 structures. The pyrazolopyrimidinone groups of 12 and sildenafil are well superimposed, but their sulfonamide groups show a positional difference of as much as 1.5 Angstroms . The structure-activity analysis suggests that a small hydrophobic pocket and the H-loop of PDE5 are important for the inhibitor affinity, in addition to two common elements for binding of almost all the PDE inhibitors: the stack against the phenylalanine and the hydrogen bond with the invariant glutamine. However, the PDE5-12 structure does not provide a full explanation to affinity changes of the inhibitors. Thus alternatives such as conformational change of the M-loop are open and further structural study is required.

  11. Combining structure-based pharmacophore and in silico approaches to discover novel selective serotonin reuptake inhibitors.

    PubMed

    Zhou, Zheng-Li; Liu, Hsuan-Liang; Wu, Josephine W; Tsao, Cheng-Wen; Chen, Wei-Hsi; Liu, Kung-Tien; Ho, Yih

    2013-12-01

    Inhibition of human serotonin transporter (hSERT) has been reported to be a potent strategy for the treatment for depression. To discover novel selective serotonin reuptake inhibitors (SSRIs), a structure-based pharmacophore model (SBPM) was developed using the docked conformations of six highly active SSRIs. The best SBPM, consisting of four chemical features: two ring aromatics (RAs), one hydrophobic (HY), and one positive ionizable (PI), was further validated using Gunner-Henry (GH) scoring and receiver operating characteristic (ROC) curve methods. This well-validated SBPM was then used as a 3D-query in virtual screening to identify potential hits from National Cancer Institute (NCI) database. These hits were subsequently filtered by absorption, distribution, metabolism, excretion, and toxicity (ADMET) prediction and molecular docking, and their binding stabilities were validated by 20-ns MD simulations. Finally, only two compounds (NSC175176 and NSC705841) were identified as potential leads, which exhibited higher binding affinities in comparison with the paroxetine. Our results also suggest that cation-π interaction plays a crucial role in stabilizing the hSERT-inhibitor complex. To our knowledge, the present work is the first structure-based virtual screening study for new SSRI discovery, which should be a useful guide for the rapid identification of novel therapeutic agents from chemical database.

  12. New public QSAR model for carcinogenicity

    PubMed Central

    2010-01-01

    Background One of the main goals of the new chemical regulation REACH (Registration, Evaluation and Authorization of Chemicals) is to fulfill the gaps in data concerned with properties of chemicals affecting the human health. (Q)SAR models are accepted as a suitable source of information. The EU funded CAESAR project aimed to develop models for prediction of 5 endpoints for regulatory purposes. Carcinogenicity is one of the endpoints under consideration. Results Models for prediction of carcinogenic potency according to specific requirements of Chemical regulation were developed. The dataset of 805 non-congeneric chemicals extracted from Carcinogenic Potency Database (CPDBAS) was used. Counter Propagation Artificial Neural Network (CP ANN) algorithm was implemented. In the article two alternative models for prediction carcinogenicity are described. The first model employed eight MDL descriptors (model A) and the second one twelve Dragon descriptors (model B). CAESAR's models have been assessed according to the OECD principles for the validation of QSAR. For the model validity we used a wide series of statistical checks. Models A and B yielded accuracy of training set (644 compounds) equal to 91% and 89% correspondingly; the accuracy of the test set (161 compounds) was 73% and 69%, while the specificity was 69% and 61%, respectively. Sensitivity in both cases was equal to 75%. The accuracy of the leave 20% out cross validation for the training set of models A and B was equal to 66% and 62% respectively. To verify if the models perform correctly on new compounds the external validation was carried out. The external test set was composed of 738 compounds. We obtained accuracy of external validation equal to 61.4% and 60.0%, sensitivity 64.0% and 61.8% and specificity equal to 58.9% and 58.4% respectively for models A and B. Conclusion Carcinogenicity is a particularly important endpoint and it is expected that QSAR models will not replace the human experts opinions

  13. High-throughput structure-based pharmacophore modelling as a basis for successful parallel virtual screening.

    PubMed

    Steindl, Theodora M; Schuster, Daniela; Wolber, Gerhard; Laggner, Christian; Langer, Thierry

    2006-12-01

    In order to assess bioactivity profiles for small organic molecules we propose to use parallel pharmacophore-based virtual screening. Our aim is to provide a fast, reliable and scalable system that allows for rapid in silico activity profile prediction of virtual molecules. In this proof of principle study, carried out with the new structure-based pharmacophore modelling tool LigandScout and the high-performance database mining platform Catalyst, we present a model work for the application of parallel pharmacophore-based virtual screening on a set of 50 structure-based pharmacophore models built for various viral targets and 100 antiviral compounds. The latter were screened against all pharmacophore models in order to determine if their known biological targets could be correctly predicted via an enrichment of corresponding pharmaco-phores matching these ligands. The results demonstrate that the desired enrichment, i.e. a successful activity profiling, was achieved for approximately 90% of all input molecules. Additionally, we discuss descriptors for output validation, as well as various aspects influencing the analysis of the obtained activity profiles, and the effect of the searching mode utilized for screening. The results of the study presented here clearly indicate that pharmacophore-based parallel screening comprises a reliable in silico method to predict the potential biological activities of a compound or a compound library by screening it against a series of pharmacophore queries.

  14. Site-Identification by Ligand Competitive Saturation (SILCS) assisted pharmacophore modeling

    NASA Astrophysics Data System (ADS)

    Yu, Wenbo; Lakkaraju, Sirish Kaushik; Raman, E. Prabhu; MacKerell, Alexander D.

    2014-05-01

    Database screening using receptor-based pharmacophores is a computer-aided drug design technique that uses the structure of the target molecule (i.e. protein) to identify novel ligands that may bind to the target. Typically receptor-based pharmacophore modeling methods only consider a single or limited number of receptor conformations and map out the favorable binding patterns in vacuum or with a limited representation of the aqueous solvent environment, such that they may suffer from neglect of protein flexibility and desolvation effects. Site-Identification by Ligand Competitive Saturation (SILCS) is an approach that takes into account these, as well as other, properties to determine 3-dimensional maps of the functional group-binding patterns on a target receptor (i.e. FragMaps). In this study, a method to use the FragMaps to automatically generate receptor-based pharmacophore models is presented. It converts the FragMaps into SILCS pharmacophore features including aromatic, aliphatic, hydrogen-bond donor and acceptor chemical functionalities. The method generates multiple pharmacophore hypotheses that are then quantitatively ranked using SILCS grid free energies. The pharmacophore model generation protocol is validated using three different protein targets, including using the resulting models in virtual screening. Improved performance and efficiency of the SILCS derived pharmacophore models as compared to published docking studies, as well as a recently developed receptor-based pharmacophore modeling method is shown, indicating the potential utility of the approach in rational drug design.

  15. High-throughput structure-based pharmacophore modelling as a basis for successful parallel virtual screening

    NASA Astrophysics Data System (ADS)

    Steindl, Theodora M.; Schuster, Daniela; Wolber, Gerhard; Laggner, Christian; Langer, Thierry

    2006-12-01

    In order to assess bioactivity profiles for small organic molecules we propose to use parallel pharmacophore-based virtual screening. Our aim is to provide a fast, reliable and scalable system that allows for rapid in silico activity profile prediction of virtual molecules. In this proof of principle study, carried out with the new structure-based pharmacophore modelling tool LigandScout and the high-performance database mining platform Catalyst, we present a model work for the application of parallel pharmacophore-based virtual screening on a set of 50 structure-based pharmacophore models built for various viral targets and 100 antiviral compounds. The latter were screened against all pharmacophore models in order to determine if their known biological targets could be correctly predicted via an enrichment of corresponding pharmacophores matching these ligands. The results demonstrate that the desired enrichment, i.e. a successful activity profiling, was achieved for approximately 90% of all input molecules. Additionally, we discuss descriptors for output validation, as well as various aspects influencing the analysis of the obtained activity profiles, and the effect of the searching mode utilized for screening. The results of the study presented here clearly indicate that pharmacophore-based parallel screening comprises a reliable in silico method to predict the potential biological activities of a compound or a compound library by screening it against a series of pharmacophore queries.

  16. 3D bioprinting of tissues and organs.

    PubMed

    Murphy, Sean V; Atala, Anthony

    2014-08-01

    Additive manufacturing, otherwise known as three-dimensional (3D) printing, is driving major innovations in many areas, such as engineering, manufacturing, art, education and medicine. Recent advances have enabled 3D printing of biocompatible materials, cells and supporting components into complex 3D functional living tissues. 3D bioprinting is being applied to regenerative medicine to address the need for tissues and organs suitable for transplantation. Compared with non-biological printing, 3D bioprinting involves additional complexities, such as the choice of materials, cell types, growth and differentiation factors, and technical challenges related to the sensitivities of living cells and the construction of tissues. Addressing these complexities requires the integration of technologies from the fields of engineering, biomaterials science, cell biology, physics and medicine. 3D bioprinting has already been used for the generation and transplantation of several tissues, including multilayered skin, bone, vascular grafts, tracheal splints, heart tissue and cartilaginous structures. Other applications include developing high-throughput 3D-bioprinted tissue models for research, drug discovery and toxicology.

  17. Medical 3D Printing for the Radiologist.

    PubMed

    Mitsouras, Dimitris; Liacouras, Peter; Imanzadeh, Amir; Giannopoulos, Andreas A; Cai, Tianrun; Kumamaru, Kanako K; George, Elizabeth; Wake, Nicole; Caterson, Edward J; Pomahac, Bohdan; Ho, Vincent B; Grant, Gerald T; Rybicki, Frank J

    2015-01-01

    While use of advanced visualization in radiology is instrumental in diagnosis and communication with referring clinicians, there is an unmet need to render Digital Imaging and Communications in Medicine (DICOM) images as three-dimensional (3D) printed models capable of providing both tactile feedback and tangible depth information about anatomic and pathologic states. Three-dimensional printed models, already entrenched in the nonmedical sciences, are rapidly being embraced in medicine as well as in the lay community. Incorporating 3D printing from images generated and interpreted by radiologists presents particular challenges, including training, materials and equipment, and guidelines. The overall costs of a 3D printing laboratory must be balanced by the clinical benefits. It is expected that the number of 3D-printed models generated from DICOM images for planning interventions and fabricating implants will grow exponentially. Radiologists should at a minimum be familiar with 3D printing as it relates to their field, including types of 3D printing technologies and materials used to create 3D-printed anatomic models, published applications of models to date, and clinical benefits in radiology. Online supplemental material is available for this article.

  18. Medical 3D Printing for the Radiologist

    PubMed Central

    Mitsouras, Dimitris; Liacouras, Peter; Imanzadeh, Amir; Giannopoulos, Andreas A.; Cai, Tianrun; Kumamaru, Kanako K.; George, Elizabeth; Wake, Nicole; Caterson, Edward J.; Pomahac, Bohdan; Ho, Vincent B.; Grant, Gerald T.

    2015-01-01

    While use of advanced visualization in radiology is instrumental in diagnosis and communication with referring clinicians, there is an unmet need to render Digital Imaging and Communications in Medicine (DICOM) images as three-dimensional (3D) printed models capable of providing both tactile feedback and tangible depth information about anatomic and pathologic states. Three-dimensional printed models, already entrenched in the nonmedical sciences, are rapidly being embraced in medicine as well as in the lay community. Incorporating 3D printing from images generated and interpreted by radiologists presents particular challenges, including training, materials and equipment, and guidelines. The overall costs of a 3D printing laboratory must be balanced by the clinical benefits. It is expected that the number of 3D-printed models generated from DICOM images for planning interventions and fabricating implants will grow exponentially. Radiologists should at a minimum be familiar with 3D printing as it relates to their field, including types of 3D printing technologies and materials used to create 3D-printed anatomic models, published applications of models to date, and clinical benefits in radiology. Online supplemental material is available for this article. ©RSNA, 2015 PMID:26562233

  19. 3D imaging in forensic odontology.

    PubMed

    Evans, Sam; Jones, Carl; Plassmann, Peter

    2010-06-16

    This paper describes the investigation of a new 3D capture method for acquiring and subsequent forensic analysis of bite mark injuries on human skin. When documenting bite marks with standard 2D cameras errors in photographic technique can occur if best practice is not followed. Subsequent forensic analysis of the mark is problematic when a 3D structure is recorded into a 2D space. Although strict guidelines (BAFO) exist, these are time-consuming to follow and, due to their complexity, may produce errors. A 3D image capture and processing system might avoid the problems resulting from the 2D reduction process, simplifying the guidelines and reducing errors. Proposed Solution: a series of experiments are described in this paper to demonstrate that the potential of a 3D system might produce suitable results. The experiments tested precision and accuracy of the traditional 2D and 3D methods. A 3D image capture device minimises the amount of angular distortion, therefore such a system has the potential to create more robust forensic evidence for use in courts. A first set of experiments tested and demonstrated which method of forensic analysis creates the least amount of intra-operator error. A second set tested and demonstrated which method of image capture creates the least amount of inter-operator error and visual distortion. In a third set the effects of angular distortion on 2D and 3D methods of image capture were evaluated.

  20. NUBEAM developments and 3d halo modeling

    NASA Astrophysics Data System (ADS)

    Gorelenkova, M. V.; Medley, S. S.; Kaye, S. M.

    2012-10-01

    Recent developments related to the 3D halo model in NUBEAM code are described. To have a reliable halo neutral source for diagnostic simulation, the TRANSP/NUBEAM code has been enhanced with full implementation of ADAS atomic physic ground state and excited state data for hydrogenic beams and mixed species plasma targets. The ADAS codes and database provide the density and temperature dependence of the atomic data, and the collective nature of the state excitation process. To be able to populate 3D halo output with sufficient statistical resolution, the capability to control the statistics of fast ion CX modeling and for thermal halo launch has been added to NUBEAM. The 3D halo neutral model is based on modification and extension of the ``beam in box'' aligned 3d Cartesian grid that includes the neutral beam itself, 3D fast neutral densities due to CX of partially slowed down fast ions in the beam halo region, 3D thermal neutral densities due to CX deposition and fast neutral recapture source. More details on the 3D halo simulation design will be presented.

  1. Optically rewritable 3D liquid crystal displays.

    PubMed

    Sun, J; Srivastava, A K; Zhang, W; Wang, L; Chigrinov, V G; Kwok, H S

    2014-11-01

    Optically rewritable liquid crystal display (ORWLCD) is a concept based on the optically addressed bi-stable display that does not need any power to hold the image after being uploaded. Recently, the demand for the 3D image display has increased enormously. Several attempts have been made to achieve 3D image on the ORWLCD, but all of them involve high complexity for image processing on both hardware and software levels. In this Letter, we disclose a concept for the 3D-ORWLCD by dividing the given image in three parts with different optic axis. A quarter-wave plate is placed on the top of the ORWLCD to modify the emerging light from different domains of the image in different manner. Thereafter, Polaroid glasses can be used to visualize the 3D image. The 3D image can be refreshed, on the 3D-ORWLCD, in one-step with proper ORWLCD printer and image processing, and therefore, with easy image refreshing and good image quality, such displays can be applied for many applications viz. 3D bi-stable display, security elements, etc.

  2. Molecular modeling studies of phenoxypyrimidinyl imidazoles as p38 kinase inhibitors using QSAR and docking.

    PubMed

    Ravindra, G K; Achaiah, G; Sastry, G N

    2008-04-01

    p38 Kinase plays a vital role in inflammation mediated by tumor necrosis factor-alpha (TNFalpha) and interleukin-1beta (IL-1beta) pathways and inhibitors of p38 kinase provide effective approach for the treatment of inflammatory diseases. Pyridinyl and pyrimidinyl imidazoles, selectively inhibit p38alpha MAP kinase, are useful in the treatment of inflammatory diseases like rheumatoid arthritis. Three dimensional quantitative structure-activity relationship studies (3D-QSAR) involving comparative molecular field analysis (CoMFA) and comparative similarity indices analysis (CoMSIA) and molecular docking were performed on 44 phenoxypyrimidinyl imidazole p38 kinase inhibitors to find out the structural relationship with the activity. The best predictive CoMFA model with atom fit alignment resulted in cross-validated r(2) value of 0.553, noncross-validated r(2) value of 0.908 and standard error of estimate 0.187. Similarly the best predictive CoMSIA model was derived with q(2) of 0.508, noncross-validated r(2) of 0.894 and standard error of estimate of 0.197, comprising steric, electrostatic, hydrophobic and hydrogen bond donor fields. These models were able to predict the activity of test set molecules efficiently within an acceptable error range. GOLD and FlexX were employed to dock the inhibitors into the active site of the p38 kinase and these docking studies revealed the vital interactions and binding conformation of the inhibitors. The information rendered by 3D-QSAR models and the docking interactions may afford valuable clues to optimize the lead and design new potential inhibitors.

  3. Pharmacophore Modelling and Synthesis of Quinoline-3-Carbohydrazide as Antioxidants

    PubMed Central

    El Bakkali, Mustapha; Ismaili, Lhassane; Tomassoli, Isabelle; Nicod, Laurence; Pudlo, Marc; Refouvelet, Bernard

    2011-01-01

    From well-known antioxidants agents, we developed a first pharmacophore model containing four common chemical features: one aromatic ring and three hydrogen bond acceptors. This model served as a template in virtual screening of Maybridge and NCI databases that resulted in selection of sixteen compounds. The selected compounds showed a good antioxidant activity measured by three chemical tests: DPPH radical, OH° radical, and superoxide radical scavenging. New synthetic compounds with a good correlation with the model were prepared, and some of them presented a good antioxidant activity. PMID:25954520

  4. 3D packaging for integrated circuit systems

    SciTech Connect

    Chu, D.; Palmer, D.W.

    1996-11-01

    A goal was set for high density, high performance microelectronics pursued through a dense 3D packing of integrated circuits. A {open_quotes}tool set{close_quotes} of assembly processes have been developed that enable