Science.gov

Sample records for 3he-filled gas proportional

  1. Effect of temperature on performance of {sup 3}He filled neutron proportional counters

    SciTech Connect

    Desai, Shraddha S.

    2014-04-24

    Neutron detectors used for cosmic neutron monitoring and various other applications are mounted in hostile environment. It is essential for detectors to sustain extreme climatic conditions, such as extreme temperature and humidity. Effort is made to evaluate the performance of detectors in extreme temperature in terms of pulse height distribution and avalanche formation. Neutron detectors filled with {sup 3}He incorporate an additive gas with quantity optimized for a particular application. Measurements are performed on neutron detectors filled with {sup 3}He and stopping gases Kr and CF{sub 4}. Detector performance for these fill gas combinations in terms of pulse height distribution is evaluated. Gas gain and Diethorn gas constants measured and analyzed for the microscopic effect on pulse formation. Results from these investigations are presented.

  2. The 10B based Jalousie neutron detector - An alternative for 3He filled position sensitive counter tubes

    NASA Astrophysics Data System (ADS)

    Henske, M.; Klein, M.; Köhli, M.; Lennert, P.; Modzel, G.; Schmidt, C. J.; Schmidt, U.

    2012-09-01

    Over the last decades 3He filled proportional counter tubes were the working horse employed to serve as neutron counters especially in cases where large area coverage was required. Today the lack of 3He demands the development of an alternative technology. Here we present a prototype neutron detector that is based on a concept with solid 10B as neutron converter and aims for large area neutron detection applications. We report on first experimental results obtained with this prototype to demonstrate the feasibility and operational readiness of our concept.

  3. Spin exchange optical pumping based polarized {sup 3}He filling station for the Hybrid Spectrometer at the Spallation Neutron Source

    SciTech Connect

    Jiang, C. Y.; Tong, X.; Brown, D. R.; Culbertson, H.; Kadron, B.; Robertson, J. L.; Graves-Brook, M. K.; Hagen, M. E.; Lee, W. T.; Winn, B.

    2013-06-15

    The Hybrid Spectrometer (HYSPEC) is a new direct geometry spectrometer at the Spallation Neutron Source at the Oak Ridge National Laboratory. This instrument is equipped with polarization analysis capability with 60 Degree-Sign horizontal and 15 Degree-Sign vertical detector coverages. In order to provide wide angle polarization analysis for this instrument, we have designed and built a novel polarized {sup 3}He filling station based on the spin exchange optical pumping method. It is designed to supply polarized {sup 3}He gas to HYSPEC as a neutron polarization analyzer. In addition, the station can optimize the {sup 3}He pressure with respect to the scattered neutron energies. The depolarized {sup 3}He gas in the analyzer can be transferred back to the station to be repolarized. We have constructed the prototype filling station. Preliminary tests have been carried out demonstrating the feasibility of the filling station. Here, we report on the design, construction, and the preliminary results of the prototype filling station.

  4. Safety analysis of high pressure 3He-filled micro-channels for thermal neutron detection.

    SciTech Connect

    Ferko, Scott M.; Galambos, Paul C.; Derzon, Mark Steven; Renzi, Ronald F.

    2008-11-01

    This document is a safety analysis of a novel neutron detection technology developed by Sandia National Laboratories. This technology is comprised of devices with tiny channels containing high pressure {sup 3}He. These devices are further integrated into large scale neutron sensors. Modeling and preliminary device testing indicates that the time required to detect the presence of special nuclear materials may be reduced under optimal conditions by several orders of magnitude using this approach. Also, these devices make efficient use of our {sup 3}He supply by making individual devices more efficient and/or extending the our limited {sup 3}He supply. The safety of these high pressure devices has been a primary concern. We address these safety concerns for a flat panel configuration intended for thermal neutron detection. Ballistic impact tests using 3 g projectiles were performed on devices made from FR4, Silicon, and Parmax materials. In addition to impact testing, operational limits were determined by pressurizing the devices either to failure or until they unacceptably leaked. We found that (1) sympathetic or parasitic failure does not occur in pressurized FR4 devices (2) the Si devices exhibited benign brittle failure (sympathetic failure under pressure was not tested) and (3) the Parmax devices failed unacceptably. FR4 devices were filled to pressures up to 4000 + 100 psig, and the impacts were captured using a high speed camera. The brittle Si devices shattered, but were completely contained when wrapped in thin tape, while the ductile FR4 devices deformed only. Even at 4000 psi the energy density of the compressed gas appears to be insignificant compared to the impact caused by the incoming projectile. In conclusion, the current FR4 device design pressurized up to 4000 psi does not show evidence of sympathetic failure, and these devices are intrinsically safe.

  5. A Gas Proportional Scintillation Counter with krypton filling

    NASA Astrophysics Data System (ADS)

    Monteiro, C. M. B.; Mano, R. D. P.; Barata, E. C. G. M.; Fernandes, L. M. P.; Freitas, E. D. C.

    2016-12-01

    A Gas Proportional Scintillation Counter filled with pure krypton was studied. Energy resolution below 10% for 5.9-keV X-rays was obtained with this prototype. This value is much better than the energy resolution obtained with proportional counters or other MPGDs with krypton filling. The krypton electroluminescence scintillation and ionisation thresholds were found to be about 0.5 and 3.5 kV cm-1bar-1, respectively.

  6. Gas amplification factor in neon-nitrogen filled proportional counters

    NASA Astrophysics Data System (ADS)

    Othman, A.

    1988-07-01

    The gas amplification factor in a cylindrical proportional counter filled with NeN 2 Penning mixtures has been measured (over the range 1 < A < 6.4 × 10 3) to verify the validity of the gas gain formulae of Rose and Korff, Khristov, Williams and Sara, Diethorn and Zastawny. This factor has been found to obey Zastawny's formula over the range of variables studied. The formula of Diethorn can be fitted only for small nitrogen concentrations (below 5 × 10 -4). Constants appropriate to the Zastawny and Diethorn formulae have been determined over a wide range of N 2 concentrations from spectroscopically pure Ne up to 11.1% N 2.

  7. Optimization of simultaneous tritium–radiocarbon internal gas proportional counting

    SciTech Connect

    Bonicalzi, R. M.; Aalseth, C. E.; Day, A. R.; Hoppe, E. W.; Mace, E. K.; Moran, J. J.; Overman, C. T.; Panisko, M. E.; Seifert, A.

    2016-03-01

    Specific environmental applications can benefit from dual tritium and radiocarbon measurements in a single compound. Assuming typical environmental levels, it is often the low tritium activity relative to the higher radiocarbon activity that limits the dual measurement. In this paper, we explore the parameter space for a combined tritium and radiocarbon measurement using a methane sample mixed with an argon fill gas in low-background proportional counters of a specific design. We present an optimized methane percentage, detector fill pressure, and analysis energy windows to maximize measurement sensitivity while minimizing count time. The final optimized method uses a 9-atm fill of P35 (35% methane, 65% argon), and a tritium analysis window from 1.5 to 10.3 keV, which stops short of the tritium beta decay endpoint energy of 18.6 keV. This method optimizes tritium counting efficiency while minimizing radiocarbon beta decay interference.

  8. Optimization of simultaneous tritium-radiocarbon internal gas proportional counting

    NASA Astrophysics Data System (ADS)

    Bonicalzi, R. M.; Aalseth, C. E.; Day, A. R.; Hoppe, E. W.; Mace, E. K.; Moran, J. J.; Overman, C. T.; Panisko, M. E.; Seifert, A.

    2016-03-01

    Specific environmental applications can benefit from dual tritium and radiocarbon measurements in a single compound. Assuming typical environmental levels, it is often the low tritium activity relative to the higher radiocarbon activity that limits the dual measurement. In this paper, we explore the parameter space for a combined tritium and radiocarbon measurement using a natural methane sample mixed with an argon fill gas in low-background proportional counters of a specific design. We present an optimized methane percentage, detector fill pressure, and analysis energy windows to maximize measurement sensitivity while minimizing count time. The final optimized method uses a 9-atm fill of P35 (35% methane, 65% argon), and a tritium analysis window from 1.5 to 10.3 keV, which stops short of the tritium beta decay endpoint energy of 18.6 keV. This method optimizes tritium-counting efficiency while minimizing radiocarbon beta-decay interference.

  9. An imaging gas scintillation proportional counter for the detection of subkiloelectron-volt X-rays

    NASA Technical Reports Server (NTRS)

    Hailey, C. J.; Ku, W. H. M.; Vartanian, M. H.

    1981-01-01

    A large area imaging gas scintillation proportional counter (IGSPC) was constructed for use in X-ray astronomy. The IGSPC consists of a gas scintillation proportional counted (GSPC) with a micron polyprotylene window coupled to a multiwire proportional counter (MWPC) via a calcium fluoride window. Over a sensitive area of 21 cu cm the instrument has a measured energy resolution of 17.5% (FWHM) and 1.9 mm (FWHM) spatial resolution at 1.5 keV.

  10. Effect of air on energy and rise-time spectra measured by proportional gas counter

    SciTech Connect

    Kawano, T.; Tanaka, M.; Isozumi, S.; Isozumi, Y.; Tosaki, M.; Sugiyama, T.

    2015-03-15

    Air exerts a negative effect on radiation detection using a gas counter because oxygen contained in air has a high electron attachment coefficient and can trap electrons from electron-ion pairs created by ionization from incident radiation in counting gas. This reduces radiation counts. The present study examined the influence of air on energy and rise-time spectra measurements using a proportional gas counter. In addition, a decompression procedure method was proposed to reduce the influence of air and its effectiveness was investigated. For the decompression procedure, the counting gas inside the gas counter was decompressed below atmospheric pressure before radiation detection. For the spectrum measurement, methane as well as various methane and air mixtures were used as the counting gas to determine the effect of air on energy and rise-time spectra. Results showed that the decompression procedure was effective for reducing or eliminating the influence of air on spectra measurement using a proportional gas counter. (authors)

  11. GAMMA PROPORTIONAL COUNTER CONTAINING HIGH Z GAS AND LOW Z MODERATOR

    DOEpatents

    Fox, R.

    1963-07-23

    A gamma radiation counter employing a gas proportional counter is described. The radiation counter comprises a cylindrical gas proportional counter which contains a high atomic number gas and is surrounded by a low atomic number gamma radiation moderator material. At least one slit is provided in the moderator to allow accident gamma radiation to enter the moderator in the most favorable manner for moderation, and also to allow low energy gamma radiation to enter the counter without the necessity of passing through the moderator. This radiation counter is capable of detecting and measuring gamma radiation in the energy range of 0.5-5 Mev. (AEC)

  12. An imaging gas scintillation proportional counter for use in X-ray astronomy

    NASA Technical Reports Server (NTRS)

    Hailey, C. J.; Ku, W. H.-M.; Vartanian, M. H.

    1983-01-01

    An imaging gas scintillation proportional counter (GSPC) has been constructed for use in X-ray astronomy. The IGSPC consists of a gas scintillation proportional counter (GSPC) with a 1 micron polypropylene window coupled to a multiwire proportional counter (MWPC) via a calcium fluoride window. The MWPC, filled with a mixture of argon, methane, and tetrakis (dimethylamino) ethylene, detects the UV photons emitted by the xenon gas in the GSPC. The measured energy resolution is 17.0 percent (fwhm) and 8.0 percent (fwhm) at 1.5 keV and 5.9 keV, respectively. The measured position resolution is 1.9 mm (fwhm) and 0.9 mm (fwhm) at 1.5 and 5.9 keV, respectively. Possible astrophysical observations which can be performed with an IGSPC at the focal plane of a grazing incidence telescope are also discussed.

  13. A gas scintillation proportional detector to search for 17 keV neutrinos

    SciTech Connect

    Okx, W.J.C.; Bom, V.R.; Eijk, C.W.E. van; Hollander, R.W. )

    1993-08-01

    Evidence for the existence of a 17 keV neutrino was first reported in 1985. Since then many experiments have been performed with contradicting results. In this paper the authors describe an experiment with a new approach to the problem by the introduction of a Gas Scintillation Proportional Detector.

  14. Characteristics of a high pressure gas proportional counter filled with xenon

    NASA Technical Reports Server (NTRS)

    Sakurai, H.; Ramsey, B. D.

    1991-01-01

    The characteristics of a conventional cylindrical geometry proportional counter filled with high pressure xenon gas up to 10 atm. were fundamentally investigated for use as a detector in hard X-ray astronomy. With a 2 percent methane gas mixture the energy resolutions at 10 atm. were 9.8 percent and 7.3 percent for 22 keV and 60 keV X-rays, respectively. From calculations of the Townsend ionization coefficient, it is shown that proportional counters at high pressure operate at weaker reduced electric field than low pressure counters. The characteristics of a parallel grid proportional counter at low pressure showed similar pressure dependence. It is suggested that this is the fundamental reason for the degradation of resolution observed with increasing pressure.

  15. Neutron spectroscopy with the Spherical Proportional Counter based on nitrogen gas

    NASA Astrophysics Data System (ADS)

    Bougamont, E.; Dastgheibi, A.; Derre, J.; Galan, J.; Gerbier, G.; Giomataris, I.; Gros, M.; Katsioulas, I.; Jourde, D.; Magnier, P.; Navick, X. F.; Papaevangelou, T.; Savvidis, I.; Tsiledakis, G.

    2017-03-01

    A novel large volume spherical proportional counter, recently developed, is used for neutron measurements. The pure N2 gas is studied for thermal and fast neutron detection, providing a new way for neutron spectroscopy. The neutrons are detected via the 14N (n , p)C14 and 14N (n , α)B11 reactions. The detector is tested for thermal and fast neutrons detection with 252Cf and 241Am -9Be neutron sources. The atmospheric neutrons are successfully measured from thermal up to several MeV, well separated from the cosmic ray background. A comparison of the spherical proportional counter with the current available neutron counters is also presented.

  16. Demand-type gas supply system for rocket borne thin-window proportional counters

    NASA Technical Reports Server (NTRS)

    Acton, L. W.; Caravalho, R.; Catura, R. C.; Joki, E. G.

    1977-01-01

    A simple closed loop control system has been developed to maintain the gas pressure in thin-window proportional counters during rocket flights. This system permits convenient external control of detector pressure and system flushing rate. The control system is activated at launch with the sealing of a reference volume at the existing system pressure. Inflight control to plus or minus 2 torr at a working pressure of 760 torr has been achieved on six rocket flights.

  17. Sensitivity to x-ray polarization of a microgap gas proportional counter

    NASA Astrophysics Data System (ADS)

    Soffitta, Paolo; Costa, Enrico; Morelli, Ennio; Bellazzini, Ronaldo; Brez, Alessandro; Raffo, R.

    1995-10-01

    We measured the average anisotropy of the primary charge cloud produced by photoelectron when an x-ray beam linearly polarized is absorbed on a Ne-DME gas mixture by using a micro-gap proportional counter. This average anisotropy is not present when an Fe55 unpolarized x-ray source is used. We discuss the results of our measurement in terms of performances of this detector as an x-ray polarimeter.

  18. A large area imaging gas scintillation proportional counter for use in X-ray astronomy

    NASA Technical Reports Server (NTRS)

    Ku, W. H.-M.; Lum, K. S.; Vartanian, M. H.

    1984-01-01

    A large area (200 sq cm), broad bandwidth (0.1-70 keV), imaging gas scintillation proportional counter (IGSPC) has been constructed for use in X-ray astronomy. The IGSPC consists of a high pressure xenon gas scintillation proportional counter (GSPC) coupled to a multi-wire proportional counter (MWPC) via a calcium fluoride window. THe MWPC, filled with a mixture of argon, methane, and tetrakis (dimethylamino) ethylene, detects the UV photons emitted by the xenon gas in the GSPC. The detector has a measured energy resolution of 8.0 percent (FWHM) and 4.3 percent (FWHM) at 5.9 keV and 22.1 keV, respectively. The predicted spatial resolution of the detector is less than 1 mm (FWHM) between 3-22 keV and 37-60 keV. A method to determine the three-dimensional location of detected X-rays is described. In addition, a combination of discrimination schemes designed to reduce the non-X-ray background in the IGSPC by more than two orders of magnitude is discussed.

  19. A New Shallow Underground Gas-Proportional Counting Lab - First Results and Ar-37 Sensitivity

    SciTech Connect

    Aalseth, Craig E.; Day, Anthony R.; Fuller, Erin S.; Hoppe, Eric W.; Keillor, Martin E.; LaFerriere, Brian D.; Mace, Emily K.; Merriman, Jason H.; Myers, Allan W.; Overman, Cory T.; Panisko, Mark E.; Seifert, Allen; Warren, Glen A.; Williams, Richard M.

    2013-11-01

    Abstract A new ultra-low-background proportional counter was recently developed with an internal volume of 100 ml and has been characterized at pressures from 1-10 atmospheres with P-10 (90% Ar, 10% methane) gas. This design, along with a counting system providing event digitization and passive and active shielding, has been developed to complement a new shallow underground laboratory (30 meters water-equivalent). Backgrounds and low-level reference materials have been measured, and system sensitivity for Ar-37 has been calculated.

  20. Lineal energy calibration of mini tissue-equivalent gas-proportional counters (TEPC)

    NASA Astrophysics Data System (ADS)

    Conte, V.; Moro, D.; Grosswendt, B.; Colautti, P.

    2013-07-01

    Mini TEPCs are cylindrical gas proportional counters of 1 mm or less of sensitive volume diameter. The lineal energy calibration of these tiny counters can be performed with an external gamma-ray source. However, to do that, first a method to get a simple and precise spectral mark has to be found and then the keV/μm value of this mark. A precise method (less than 1% of uncertainty) to identify this markis described here, and the lineal energy value of this mark has been measured for different simulated site sizes by using a 137Cs gamma source and a cylindrical TEPC equipped with a precision internal 244Cm alpha-particle source, and filled with propane-based tissue-equivalent gas mixture. Mini TEPCs can be calibrated in terms of lineal energy, by exposing them to 137Cesium sources, with an overall uncertainty of about 5%.

  1. Lineal energy calibration of mini tissue-equivalent gas-proportional counters (TEPC)

    SciTech Connect

    Conte, V.; Moro, D.; Colautti, P.; Grosswendt, B.

    2013-07-18

    Mini TEPCs are cylindrical gas proportional counters of 1 mm or less of sensitive volume diameter. The lineal energy calibration of these tiny counters can be performed with an external gamma-ray source. However, to do that, first a method to get a simple and precise spectral mark has to be found and then the keV/{mu}m value of this mark. A precise method (less than 1% of uncertainty) to identify this markis described here, and the lineal energy value of this mark has been measured for different simulated site sizes by using a {sup 137}Cs gamma source and a cylindrical TEPC equipped with a precision internal {sup 244}Cm alpha-particle source, and filled with propane-based tissue-equivalent gas mixture. Mini TEPCs can be calibrated in terms of lineal energy, by exposing them to {sup 137}Cesium sources, with an overall uncertainty of about 5%.

  2. A High-Energy Focal-Plane Gas Scintillation Proportional Counter

    NASA Technical Reports Server (NTRS)

    Ramsey, B. D.; Austin, R. A.; Apple, J. A.; Dietz, K. L.

    1999-01-01

    We have developed a high-pressure Gas Scintillation Proportional Counter (GSPC) for the focus of a hard-x-ray telescope. It features an absorption region 50 mm in diameter and 50 mm deep, filled with Xenon + 4% He at 10(exp 6) Pa total pressure, which gives useful response (greater than 75% efficiency) up to the mirror cut-off of 70 keV. Tests with a prototype unit show an energy resolution of 3.5% at 60 keV and a spatial resolution of 0.35 mm from 30-50 keV. Two flight units are currently under construction for a balloon flight in September 1999. Full details of their design and performance will be presented together with available quick-look background data from the flight.

  3. Gas Scintillation Proportional Counters for High-Energy X-ray Astronomy

    NASA Technical Reports Server (NTRS)

    Gubarev, Mikhail; Ramsey, Brian; Apple, Jeffery

    2003-01-01

    A focal plane array of high-pressure gas scintillation proportional counters (GSPC) for a balloon-borne hard-x-ray telescope is under development at the Marshall Space Flight Center. These detectors have an active area of approx. 20 sq cm, and are filled with a high pressure (10(exp 6) Pa) xenon-helium mixture. Imaging is via crossed-grid position-sensitive phototubes sensitive in the UV region. The performance of the GSPC is well matched to that of the telescopes x-ray optics which have response to 75 keV and a focal spot size of approx. 500 microns. The detector s energy resolution, 4% FWHM at 60 keV, is adequate for resolving the broad spectral lines of astrophysical importance and for accurate continuum measurements. Full details of the instrument and its performance will be provided.

  4. A high resolution gas scintillation proportional counter for studying low energy cosmic X-ray sources

    NASA Technical Reports Server (NTRS)

    Hamilton, T. T.; Hailey, C. J.; Ku, W. H.-M.; Novick, R.

    1980-01-01

    In recent years much effort has been devoted to the development of large area gas scintillation proportional counters (GSPCs) suitable for use in X-ray astronomy. The paper deals with a low-energy GSPC for use in detecting sub-keV X-rays from cosmic sources. This instrument has a measured energy resolution of 85 eV (FWHM) at 149 eV over a sensitive area of 5 sq cm. The development of imaging capability for this instrument is discussed. Tests are performed on the feasibility of using an arrangement of several phototubes placed adjacent to one another to determine event locations in a large flat counter. A simple prototype has been constructed and successfully operated.

  5. Photoelectron range limitations to the spatial resolution for x-rays in gas proportional chambers

    SciTech Connect

    Smith, G.C.; Fischer, J.; Radeka, V.

    1983-11-01

    Measurements have been made, for x-ray energies from a few keV to 18 keV, of the limiting spatial resolution caused by the finite range of the photoelectron, or electrons, created when an x-ray is absorbed in the gas of a proportional chamber. In hydrocarbon gases such as methane and ethane, where the photoelectron receives the bulk of the x-ray energy, the limiting spatial resolution is found to vary as a power law of x-ray energy. In argon and xenon, at an x-ray energy approximately twice that of the A/sub K/ edge and the Xe/sub L/ edge respectively, the measured limiting resolution is better than expected from an equivalent power law behavior.

  6. Performance of Gas Scintillation Proportional Counter Array for High-Energy X-Ray Observatory

    NASA Technical Reports Server (NTRS)

    Gubarev, Mikhail; Ramsey, Brian; Apple, Jeffery

    2004-01-01

    A focal plane array of high-pressure gas scintillation proportional counters (GSPC) for a High Energy X-Ray Observatory (HERO) is developed at the Marshall Space Flight Center. The array is consisted from eight GSPCs and is a part of balloon born payload scheduled to flight in May 2004. These detectors have an active area of approximately 20 square centimeters, and are filled with a high pressure (10(exp 6) Pa) xenon-helium mixture. Imaging is via crossed-grid position-sensitive phototubes sensitive in the UV region. The performance of the GSPC is well matched to that of the telescopes x-ray optics which have response to 75 keV and a focal spot size of approximately 500 microns. The detector's energy resolution, 4% FWHM at 60 keV, is adequate for resolving the broad spectral lines of astrophysical importance and for accurate continuum measurements. Results of the on-earth detector calibration will be presented and in-flight detector performance will be provided, as available.

  7. Use of the small gas proportional counters for the carbon-14 measurement of very small samples

    SciTech Connect

    Sayre, E.V.; Harbottle, G.; Stoenner, R.W.; Otlet, R.L.; Evans, G.V.

    1981-01-01

    Two recent developments are: the first is the mass-spectrometric separation of /sup 14/C and /sup 12/C ions, followed by counting of the /sup 14/C, while the second is the extension of conventional proportional counter operation, using CO/sub 2/ as counting gas, to very small counters and samples. Although the second method is slow (months of counting time are required for 10 mg of carbon) it does not require operator intervention and many samples may be counted simultaneously. Also, it costs only a fraction of the capital expense of an accelerator installation. The development, construction and operation of suitable small counters are described, and results of three actual dating studies involving milligram scale carbon samples will be given. None of these could have been carried out if conventional, gram-sized samples had been needed. New installations, based on the use of these counters, are under construction or in the planning stages. These are located at Brookhaven Laboratory, the National Bureau of Standards (USA) and Harwell (UK). The Harwell installation, which is in advanced stages of construction, will be described in outline. The main significance of the small-counter method is, that although it will not suffice to measure the smallest (much less than 10 mg) or oldest samples, it will permit existing radiocarbon laboratories to extend their capability considerably, in the direction of smaller samples, at modest expense.

  8. Hybrid gas scintillation proportional counter/phoswich detector for hard X-ray astronomy

    NASA Technical Reports Server (NTRS)

    Grindlay, Jonathan E.; Manandhar, Raj P.

    1989-01-01

    A concept is presented for a balloon-borne imaging hybrid proportional counter/phoswich detector of medium to hard X-rays. The phoswich would be optically coupled to the exit window of the proportional counter, and both detectors would use a common position-sensitive readout. It is anticipated that such a detector could combine the good energy and position resolution and excellent background rejection ability of the proportional counter for incident photon energies less than 100 keV with the extended response of the phoswich for higher energies. The phoswich could also be used to reject Compton scattering events in the proportional counter. This detector concept is studied using numerical simulations of a 400 sq cm square prototype detector. Results from this simulation indicate that current levels of proportional counter and phoswich performance are attainable at small cost in quantum efficiency, compared to a bare phoswich detector.

  9. A semi-microscopic derivation of gas gain formula for proportional counters

    NASA Astrophysics Data System (ADS)

    Mazed, D.; Baaliouamer, M.

    1999-11-01

    Using the microscopic definition of the Townsend coefficient and based on theoretical considerations related to the physical behaviour of electrons in gases in conjunction with a set of empirical results, a semi-microscopic formula of α/ N, the first Townsend coefficient to gas density ratio, is developed in the form α/N=KS exp[-(S 0/S) 1+m] , where S= E/ N is the electric field strength to gas density ratio, and K, S 0 and m (0≤m≤1) characterize the gaseous medium. It is shown that when m=0 the α/ N formula reduces to the product of the analytical forms suggested by Diethorn as well as Williams and Sara. Moreover, it is shown that Diethorn and Zastawny formulae are simply deduced, respectively, as the first- and the second-order expansions of the combined formula. Applicability of the obtained gas gain formula for different sets of experimental gas gain data bring out a good consistency of the proposed gas amplification model.

  10. Search for magnetic monopoles using proportional counters filled with helium gas

    NASA Technical Reports Server (NTRS)

    Cho, C.; Higashi, S.; Hiraoka, N.; Maruyama, A.; Ozaki, S.; Tsuji, K.

    1985-01-01

    Slow magnetic monopoles in cosmic rays have been searched at sea level with the detector which consists of seven layers of proportional counters filled with a mixture of He + 20% CH4. The velocities and the energy losses of the incident particles are measured. The upper limit of flux for the monopoles in the velocity range of 1 x 0.001 Beta 4 x 0.001 is 2.78 x 10 to the minus 12th power square centimeters sr sec of 90% confidence level.

  11. Use of propane as a quench gas in argon-filled proportional counters and comparison with other quench gases

    NASA Technical Reports Server (NTRS)

    Agrawal, P. C.; Ramsey, B. D.

    1988-01-01

    An experimental investigation of propane and six other quench gases was carried out in argon-filled proportional counters. The objective of the study was to find the best gas mixture for optimizing the gas gain and the energy resolution as well as to understand the role of the ionization potential of quench gases in determining these parameters. It was found that the best gas gains and energy resolutions are obtained with propane, ethane, and isobutane in that order. The ionization potentials of these three lie below the argon metastable potentials and have the lowest value of resonance defect compared to the other quench gases. The better results obtained with these mixtures can be explained by an increased ionization yield resulting from the Penning effect. Propylene and trans-2-butene give inferior performance compared to the above three gases. Methane and carbon dioxide, the most commonly used quench gases in the argon-filled detectors, provide the worst results.

  12. Initial characterization of unequal-length, low-background proportional counters for absolute gas-counting applications

    SciTech Connect

    Mace, E. K.; Aalseth, C. E.; Bonicalzi, R.; Day, A. R.; Fuller, E. S.; Hayes, J. C.; Hoppe, E. W.; LaFerriere, B. D.; Merriman, J. H.; Overman, C. T.; Seifert, A.; Williams, R. M.

    2013-08-08

    Characterization of two sets of custom unequal length proportional counters is underway at Pacific Northwest National Laboratory (PNNL). These detectors will be used in measurements to determine the absolute activity concentration of gaseous radionuclides (e.g., {sup 37}Ar). A set of three detectors has been fabricated based on previous PNNL ultra-low-background proportional counter designs and now operate in PNNL's shallow underground counting laboratory. A second set of four counters has also been fabricated using clean assembly of Oxygen-Free High-Conductivity copper components for use in a shielded above-ground counting laboratory. Characterization of both sets of detectors is underway with measurements of background rates, gas gain, and energy resolution. These results will be presented along with a shielding study for the above-ground cave.

  13. Gas proportional detectors with interpolating cathode pad readout for high track multiplicities

    SciTech Connect

    Yu, Bo

    1991-12-01

    New techniques for position encoding in very high rate particle and photon detectors will be required in experiments planned for future particle accelerators such as the Superconducting Super Collider and new, high intensity, synchrotron sources. Studies of two interpolating cathode ``pad`` readout systems are described in this thesis. They are well suited for high multiplicity, two dimensional unambiguous position sensitive detection of minimum ionizing particles and heavy ions as well as detection of x-rays at high counting rates. One of the readout systems uses subdivided rows of pads interconnected by resistive strips as the cathode of a multiwire proportional chamber (MWPC). A position resolution of less than 100 {mu}m rms, for 5.4 keV x-rays, and differential non-linearity of 12% have been achieved. Low mass ({approximately}0.6% of a radiation length) detector construction techniques have been developed. The second readout system uses rows of chevron shaped cathode pads to perform geometrical charge division. Position resolution (FWHM) of about 1% of the readout spacing and differential non-linearity of 10% for 5.4 keV x-rays have been achieved. A review of other interpolating methods is included. Low mass cathode construction techniques are described. In conclusion, applications and future developments are discussed. 54 refs.

  14. Gas proportional detectors with interpolating cathode pad readout for high track multiplicities

    SciTech Connect

    Yu, Bo.

    1991-12-01

    New techniques for position encoding in very high rate particle and photon detectors will be required in experiments planned for future particle accelerators such as the Superconducting Super Collider and new, high intensity, synchrotron sources. Studies of two interpolating cathode pad'' readout systems are described in this thesis. They are well suited for high multiplicity, two dimensional unambiguous position sensitive detection of minimum ionizing particles and heavy ions as well as detection of x-rays at high counting rates. One of the readout systems uses subdivided rows of pads interconnected by resistive strips as the cathode of a multiwire proportional chamber (MWPC). A position resolution of less than 100 {mu}m rms, for 5.4 keV x-rays, and differential non-linearity of 12% have been achieved. Low mass ({approximately}0.6% of a radiation length) detector construction techniques have been developed. The second readout system uses rows of chevron shaped cathode pads to perform geometrical charge division. Position resolution (FWHM) of about 1% of the readout spacing and differential non-linearity of 10% for 5.4 keV x-rays have been achieved. A review of other interpolating methods is included. Low mass cathode construction techniques are described. In conclusion, applications and future developments are discussed. 54 refs.

  15. Digital Pulse-Shape Discrimination Applied to an Ultra-Low-Background Gas-Proportional Counting System: First Results

    SciTech Connect

    Aalseth, Craig E.; Day, Anthony R.; Fuller, Erin S.; Hoppe, Eric W.; Keillor, Martin E.; Mace, Emily K.; Myers, A. W.; Overman, Cory T.; Panisko, Mark E.; Seifert, Allen; Warren, Glen A.; Williams, Richard M.

    2013-05-01

    Abstract A new ultra-low-background proportional counter (ULBPC) design was recently developed at Pacific Northwest National Laboratory (PNNL). This design, along with an ultra-low-background counting system (ULBCS) which provides passive and active shielding with radon exclusion, has been developed to complement a new shallow underground laboratory (~30 meters water-equivalent) constructed at PNNL. After these steps to mitigate dominant backgrounds (cosmic rays, external gamma-rays, radioactivity in materials), remaining background events do not exclusively arise from ionization of the proportional counter gas. Digital pulse-shape discrimination (PSD) is thus employed to further improve measurement sensitivity. In this work, a template shape is generated for each individual sample measurement of interest, a "self-calibrating" template. Differences in event topology can also cause differences in pulse shape. In this work, the temporal region analyzed for each event is refined to maximize background discrimination while avoiding unwanted sensitivity to event topology. This digital PSD method is applied to sample and background data, and initial measurement results from a biofuel methane sample are presented in the context of low-background measurements currently being developed.

  16. An analytical comparison of gas gain in spherical, cylindrical and hemispherical low-pressure proportional counters intended for use in experimental microdosimetry

    NASA Astrophysics Data System (ADS)

    Broughton, David; Waker, Anthony J.

    2016-12-01

    Traditionally experimental microdosimetry has employed low pressure single cavity spherical Tissue Equivalent Proportional Counters (TEPCs). Multi-Element Tissue Equivalent Proportional Counters (METEPCs) with numerous cylindrical cavities have been constructed in order to increase sensitivity per unit volume; however existing METEPC designs are prohibitively complex and sensitive to motion and audible noise. This work proposes a novel hemispherical element with a wire-less anode ball as a solution to these issues. The gas gain characteristics of this hemispherical METEPC element were analyzed first for a single hemispherical TEPC to evaluate performance relative to current cylindrical and spherical counter designs that have been demonstrated experimentally to perform very well. This gain analysis evaluated relative avalanche size and the uniformity in maximum gain for electrons originating throughout the gas cavities of each of the three counters. Radial gas gain distributions for each counter were determined using both theoretical potential distributions as well as analytical equipotential distributions generated with ANSYS Maxwell (V. 14.0) to solve the Townsend equation. It was found that the hemispherical counter exhibits completely uniform gas gain for electrons approaching the anode from all directions and its avalanche region occupies only 3.5×10-3% of the entire gas cavity volume, whereas in the cylindrical and spherical counters the avalanche occupies 0.6% and 0.12% of the total respective gas cavity volumes. These analytical gas gain results are promising, suggesting that the hemisphere should exhibit uniform signal amplification throughout the gas cavity and if the recommended follow-up experimental work demonstrates the hemispherical counter works as anticipated it will be ready to be incorporated into an METEPC design.

  17. Multiwire proportional chamber development

    NASA Technical Reports Server (NTRS)

    Doolittle, R. F.; Pollvogt, U.; Eskovitz, A. J.

    1973-01-01

    The development of large area multiwire proportional chambers, to be used as high resolution spatial detectors in cosmic ray experiments is described. A readout system was developed which uses a directly coupled, lumped element delay-line whose characteristics are independent of the MWPC design. A complete analysis of the delay-line and the readout electronic system shows that a spatial resolution of about 0.1 mm can be reached with the MWPC operating in the strictly proportional region. This was confirmed by measurements with a small MWPC and Fe-55 X-rays. A simplified analysis was carried out to estimate the theoretical limit of spatial resolution due to delta-rays, spread of the discharge along the anode wire, and inclined trajectories. To calculate the gas gain of MWPC's of different geometrical configurations a method was developed which is based on the knowledge of the first Townsend coefficient of the chamber gas.

  18. Preliminary development of a wall-less gas-flow proportional counter for in-situ field analysis of nuclear contamination in soil

    SciTech Connect

    Bush, S.P.; Hamby, D.M.; Martin, J.E.

    1997-03-01

    This study resulted in the design, construction and testing of a gas flow proportional counter for in-situ determination of soil contamination. The uniqueness of this detector is the screened material used for the cathode. A Pu-239 source of 0.006 {micro}Ci was mounted to the outside of the cathode to simulate radioactive soil. The detector probe was placed into a laboratory mock-up and tested to determine operating voltage, efficiency and energy resolution. Two gas flow proportional counters were built and tested. The detectors are cylindrical, each with a radius of 1.905 cm, having an anode wire with a radius of 0.0038 cm. The length of the smaller detector S anode was 2.54 cm, and the length of the larger detector S anode was 7.64 cm. Therefore, the active volumes were 28.96 cm{sup 3} and 87.10 cm{sup 3}, respectively, for the small and large detector. An operating voltage of 1975 volts was determined to be sufficient for both detectors. The average efficiency was 2.59 {+-} 0.12% and 76.71 {+-} 10.81% for the small volume and large volume detectors, respectively. The average energy resolution for the low-energy peak of the small detector was 4.24 {+-} 1.28% and for the large-energy peak was 1.37 {+-} 0.66%. The large detectors energy resolution was 17.75 {+-} 3.74%. The smaller detector, with better energy resolution, exhibited a bi-modal spectrum, whereas the larger detector S spectrum centered around a single broad peak.

  19. Proportional counter radiation camera

    DOEpatents

    Borkowski, C.J.; Kopp, M.K.

    1974-01-15

    A gas-filled proportional counter camera that images photon emitting sources is described. A two-dimensional, positionsensitive proportional multiwire counter is provided as the detector. The counter consists of a high- voltage anode screen sandwiched between orthogonally disposed planar arrays of multiple parallel strung, resistively coupled cathode wires. Two terminals from each of the cathode arrays are connected to separate timing circuitry to obtain separate X and Y coordinate signal values from pulse shape measurements to define the position of an event within the counter arrays which may be recorded by various means for data display. The counter is further provided with a linear drift field which effectively enlarges the active gas volume of the counter and constrains the recoil electrons produced from ionizing radiation entering the counter to drift perpendicularly toward the planar detection arrays. A collimator is interposed between a subject to be imaged and the counter to transmit only the radiation from the subject which has a perpendicular trajectory with respect to the planar cathode arrays of the detector. (Official Gazette)

  20. Gated strip proportional detector

    DOEpatents

    Morris, Christopher L.; Idzorek, George C.; Atencio, Leroy G.

    1987-01-01

    A gated strip proportional detector includes a gas tight chamber which encloses a solid ground plane, a wire anode plane, a wire gating plane, and a multiconductor cathode plane. The anode plane amplifies the amount of charge deposited in the chamber by a factor of up to 10.sup.6. The gating plane allows only charge within a narrow strip to reach the cathode. The cathode plane collects the charge allowed to pass through the gating plane on a set of conductors perpendicular to the open-gated region. By scanning the open-gated region across the chamber and reading out the charge collected on the cathode conductors after a suitable integration time for each location of the gate, a two-dimensional image of the intensity of the ionizing radiation incident on the detector can be made.

  1. Gated strip proportional detector

    DOEpatents

    Morris, C.L.; Idzorek, G.C.; Atencio, L.G.

    1985-02-19

    A gated strip proportional detector includes a gas tight chamber which encloses a solid ground plane, a wire anode plane, a wire gating plane, and a multiconductor cathode plane. The anode plane amplifies the amount of charge deposited in the chamber by a factor of up to 10/sup 6/. The gating plane allows only charge within a narrow strip to reach the cathode. The cathode plane collects the charge allowed to pass through the gating plane on a set of conductors perpendicular to the open-gated region. By scanning the open-gated region across the chamber and reading out the charge collected on the cathode conductors after a suitable integration time for each location of the gate, a two-dimensional image of the intensity of the ionizing radiation incident on the detector can be made.

  2. Coincidence Proportional Counter

    DOEpatents

    Manley, J H

    1950-11-21

    A coincidence proportional counter having a plurality of collecting electrodes so disposed as to measure the range or energy spectrum of an ionizing particle-emitting source such as an alpha source, is disclosed.

  3. Adaptation through proportion

    NASA Astrophysics Data System (ADS)

    Xiong, Liyang; Shi, Wenjia; Tang, Chao

    2016-08-01

    Adaptation is a ubiquitous feature in biological sensory and signaling networks. It has been suggested that adaptive systems may follow certain simple design principles across diverse organisms, cells and pathways. One class of networks that can achieve adaptation utilizes an incoherent feedforward control, in which two parallel signaling branches exert opposite but proportional effects on the output at steady state. In this paper, we generalize this adaptation mechanism by establishing a steady-state proportionality relationship among a subset of nodes in a network. Adaptation can be achieved by using any two nodes in the sub-network to respectively regulate the output node positively and negatively. We focus on enzyme networks and first identify basic regulation motifs consisting of two and three nodes that can be used to build small networks with proportional relationships. Larger proportional networks can then be constructed modularly similar to LEGOs. Our method provides a general framework to construct and analyze a class of proportional and/or adaptation networks with arbitrary size, flexibility and versatile functional features.

  4. Selecting Proportional Reasoning Tasks

    ERIC Educational Resources Information Center

    de la Cruz, Jessica A.

    2013-01-01

    With careful consideration given to task selection, students can construct their own solution strategies to solve complex proportional reasoning tasks while the teacher's instructional goals are still met. Several aspects of the tasks should be considered including their numerical structure, context, difficulty level, and the strategies they are…

  5. The microstrip proportional counter

    NASA Technical Reports Server (NTRS)

    Ramsey, B. D.

    1992-01-01

    Microstrip detectors in which the usual discrete anode and cathode wires are replaced by conducting strips on an insulating or partially insulating substrate are fabricated using integrated circuit-type photolithographic techniques and hence offer very high spatial accuracy and uniformity, together with the capability of producing extremely fine electrode structures. Microstrip proportional counters have now been variously reported having an energy resolution of better than 11 percent FWHM at 5.9 keV. They have been fabricated with anode bars down to 2 microns and on a variety of substrate materials including thin films which can be molded to different shapes. This review will examine the development of the microstrip detector with emphasis on the qualities which make this detector particularly interesting for use in astronomy.

  6. Visual Manipulatives for Proportional Reasoning.

    ERIC Educational Resources Information Center

    Moore, Joyce L.; Schwartz, Daniel L.

    The use of a visual representation in learning about proportional relations was studied, examining students' understandings of the invariance of a multiplicative relation on both sides of a proportion equation and the invariance of the structural relations that exist in different semantic types of proportion problems. Subjects were 49 high-ability…

  7. Boron-10 Lined Proportional Counter Wall Effects

    SciTech Connect

    Siciliano, Edward R.; Kouzes, Richard T.

    2012-05-01

    The Department of Energy Office of Nuclear Safeguards (NA-241) is supporting the project 'Coincidence Counting With Boron-Based Alternative Neutron Detection Technology' at Pacific Northwest National Laboratory (PNNL) for development of an alternative neutron coincidence counter. The goal of this project is to design, build and demonstrate a boron-lined proportional tube based system in the configuration of a coincidence counter. This report provides information about how variations in proportional counter radius and gas pressure in a typical coincident counter design might affect the observed signal from boron-lined tubes. A discussion comparing tubes to parallel plate counters is also included.

  8. Multiple Ways to Solve Proportions

    ERIC Educational Resources Information Center

    Ercole, Leslie K.; Frantz, Marny; Ashline, George

    2011-01-01

    When solving problems involving proportions, students may intuitively draw on strategies that connect to their understanding of fractions, decimals, and percents. These two statements--"Instruction in solving proportions should include methods that have a strong intuitive basis" and "Teachers should begin instruction with more intuitive…

  9. Proportional Reasoning as Essential Numeracy

    ERIC Educational Resources Information Center

    Dole, Shelley; Hilton, Annette; Hilton, Geoff

    2015-01-01

    This paper reports an aspect of a large research and development project that aimed to promote middle years school teachers' understanding and awareness of the pervasiveness of proportional reasoning as integral to numeracy. Teacher survey data of proportional reasoning across the curriculum were mapped on to a rich model of numeracy. Results…

  10. Bayesian Inference on Proportional Elections

    PubMed Central

    Brunello, Gabriel Hideki Vatanabe; Nakano, Eduardo Yoshio

    2015-01-01

    Polls for majoritarian voting systems usually show estimates of the percentage of votes for each candidate. However, proportional vote systems do not necessarily guarantee the candidate with the most percentage of votes will be elected. Thus, traditional methods used in majoritarian elections cannot be applied on proportional elections. In this context, the purpose of this paper was to perform a Bayesian inference on proportional elections considering the Brazilian system of seats distribution. More specifically, a methodology to answer the probability that a given party will have representation on the chamber of deputies was developed. Inferences were made on a Bayesian scenario using the Monte Carlo simulation technique, and the developed methodology was applied on data from the Brazilian elections for Members of the Legislative Assembly and Federal Chamber of Deputies in 2010. A performance rate was also presented to evaluate the efficiency of the methodology. Calculations and simulations were carried out using the free R statistical software. PMID:25786259

  11. Proportional Hazards Models of Graduation

    ERIC Educational Resources Information Center

    Chimka, Justin R.; Reed-Rhoads, Teri; Barker, Kash

    2008-01-01

    Survival analysis is a statistical tool used to describe the duration between events. Many processes in medical research, engineering, and economics can be described using survival analysis techniques. This research involves studying engineering college student graduation using Cox proportional hazards models. Among male students with American…

  12. Saving Money Using Proportional Reasoning

    ERIC Educational Resources Information Center

    de la Cruz, Jessica A.; Garney, Sandra

    2016-01-01

    It is beneficial for students to discover intuitive strategies, as opposed to the teacher presenting strategies to them. Certain proportional reasoning tasks are more likely to elicit intuitive strategies than other tasks. The strategies that students are apt to use when approaching a task, as well as the likelihood of a student's success or…

  13. Social Justice and Proportional Reasoning

    ERIC Educational Resources Information Center

    Simic-Muller, Ksenija

    2015-01-01

    Ratio and proportional reasoning tasks abound that have connections to real-world situations. Examples in this article demonstrate how textbook tasks can easily be transformed into authentic real-world problems that shed light on issues of equity and fairness, such as population growth and crime rates. A few ideas are presented on how teachers can…

  14. Understanding Proportional Reasoning for Teaching

    ERIC Educational Resources Information Center

    Kastberg, Signe E.; D'Ambrosio, Beatriz; Lynch-Davis, Kathleen

    2012-01-01

    Proportional reasoning is an important cornerstone in children's mathematical development. This sort of reasoning has been shown to develop across the early years of schooling (ages 8 to 10) through the middle years (ages 11-14). In the early years, children tend to use additive reasoning to generate solutions to problems, while later comparisons…

  15. Proportional Reasoning with a Pyramid

    ERIC Educational Resources Information Center

    Mamolo, Ami; Sinclair, Margaret; Whiteley, Walter J.

    2011-01-01

    Proportional reasoning pops up in math class in a variety of places, such as while making scaled drawings; finding equivalent fractions; converting units of measurement; comparing speeds, prices, and rates; and comparing lengths, areas, and volume. Students need to be exposed to a variety of representations to develop a sound understanding of this…

  16. [Invariants of the anthropometrical proportions].

    PubMed

    Smolianinov, V V

    2012-01-01

    In this work a general interpretation of a modulor as scales of segments proportions of anthropometrical modules (extremities and a body) is made. The objects of this study were: 1) to reason the idea of the growth modulor; 2) using the modern empirical data, to prove the validity of a principle of linear similarity for anthropometrical segments; 3) to specify the system of invariants for constitutional anthropometrics.

  17. Metacarpal proportions in Australopithecus africanus.

    PubMed

    Green, David J; Gordon, Adam D

    2008-05-01

    Recent work has shown that, despite being craniodentally more derived, Australopithecus africanus had more apelike limb-size proportions than A. afarensis. Here, we test whether the A. africanus hand, as judged by metacarpal shaft and articular proportions, was similarly apelike. More specifically, did A. africanus have a short and narrow first metacarpal (MC1) relative to the other metacarpals? Proportions of both MC breadth and length were considered: the geometric mean (GM) of articular and midshaft measurements of MC1 breadth was compared to those of MC2-4, and MC1 length was compared to MC3 length individually and also to the GM of MC2 and 3 lengths. To compare the extant hominoid sample with an incomplete A. africanus fossil record (11 attributed metacarpals), a resampling procedure imposed sampling constraints on the comparative groups that produced composite intrahand ratios. Resampled ratios in the extant sample are not significantly different from actual ratios based on associated elements, demonstrating the methodological appropriateness of this technique. Australopithecus africanus metacarpals do not differ significantly from the great apes in the comparison of breadth ratios but are significantly greater than chimpanzees and orangutans in both measures of relative length. Conversely, A. africanus has a significantly smaller breadth ratio than modern humans, but does not significantly differ from this group in either measure of relative length. We conclude that the first metacarpals of A. africanus are more apelike in relative breadth while also being more humanlike in relative length, a finding consistent with previous work on A. afarensis hand proportions. This configuration would have likely promoted a high degree of manipulative dexterity, but the relatively slender, apelike first metacarpal suggests that A. africanus did not place the same mechanical demands on the thumb as more recent, stone-tool-producing hominins.

  18. A high rate proportional chamber

    SciTech Connect

    Henderson, R.; Fraszer, W.; Openshaw, R.; Sheffer, G.; Salomon, M.; Dew, S.; Marans, J.; Wilson, P.

    1987-02-01

    Gas mixtures with high specific ionization allow the use of small interelectrode distances while still maintaining full efficiency. With the short electron drift distances the timing resolution is also improved. The authors have built and operated two 25 cm/sup 2/ chambers with small interelectrode distances. Also single wire detector cells have been built to test gas mixture lifetimes. Various admixtures of CF/sub 4/, DME, Isobutane, Ethane and Argon have been tested. Possible applications of such chambers are as beam profile monitors, position tagging of rare events and front end chambers in spectrometers.

  19. Photodetectors for Scintillator Proportionality Measurement

    SciTech Connect

    Moses, William W.; Choong, Woon-Seng; Hull, Giulia; Payne, Steve; Cherepy, Nerine; Valentine, J.D.

    2010-10-18

    We evaluate photodetectors for use in a Compton Coincidence apparatus designed for measuring scintillator proportionality. There are many requirements placed on the photodetector in these systems, including active area, linearity, and the ability to accurately measure low light levels (which implies high quantum efficiency and high signal-to-noise ratio). Through a combination of measurement and Monte Carlo simulation, we evaluate a number of potential photodetectors, especially photomultiplier tubes and hybrid photodetectors. Of these, we find that the most promising devices available are photomultiplier tubes with high ({approx}50%) quantum efficiency, although hybrid photodetectors with high quantum efficiency would be preferable.

  20. Proportional Reasoning: A Review of the Literature.

    ERIC Educational Resources Information Center

    Tourniaire, Francoise; Pulos, Steven

    1985-01-01

    The literature on proportional reasoning is reviewed. After methodology is discussed, strategies used to solve proportion problems, variables that influence performance, and training studies are each considered. (MNS)

  1. An Eagle of Cosmic Proportions

    NASA Astrophysics Data System (ADS)

    2009-07-01

    Today ESO has released a new and stunning image of the sky around the Eagle Nebula, a stellar nursery where infant star clusters carve out monster columns of dust and gas. Located 7000 light-years away, towards the constellation of Serpens (the Snake), the Eagle Nebula is a dazzling stellar nursery, a region of gas and dust where young stars are currently being formed and where a cluster of massive, hot stars, NGC 6611, has just been born. The powerful light and strong winds from these massive new arrivals are shaping light-year long pillars, seen in the image partly silhouetted against the bright background of the nebula. The nebula itself has a shape vaguely reminiscent of an eagle, with the central pillars being the "talons". The star cluster was discovered by the Swiss astronomer, Jean Philippe Loys de Chéseaux, in 1745-46. It was independently rediscovered about twenty years later by the French comet hunter, Charles Messier, who included it as number 16 in his famous catalogue, and remarked that the stars were surrounded by a faint glow. The Eagle Nebula achieved iconic status in 1995, when its central pillars were depicted in a famous image obtained with the NASA/ESA Hubble Space Telescope. In 2001, ESO's Very Large Telescope (VLT) captured another breathtaking image of the nebula in the near-infrared, giving astronomers a penetrating view through the obscuring dust, and clearly showing stars being formed in the pillars. The newly released image, obtained with the Wide-Field Imager camera attached to the MPG/ESO 2.2-metre telescope at La Silla, Chile, covers an area on the sky as large as the full Moon, and is about 15 times more extensive than the previous VLT image, and more than 200 times more extensive than the iconic Hubble visible-light image. The whole region around the pillars can now be seen in exquisite detail. The "Pillars of Creation" are in the middle of the image, with the cluster of young stars, NGC 6611, lying above and to the right. The

  2. Proportional counter for X-ray analysis of lunar and planetary surfaces. [a position sensitive scintillating imaging proportional counter

    NASA Technical Reports Server (NTRS)

    1979-01-01

    A position sensitive proportional scintillation detector was developed and evaluated for use in applications involving X-ray imaging as well as spectroscopy. Topics covered include limitations of the proportional scintillation counter for use in space; purification of the xenon gas in the detector, and the operation of the detector system. Results show that the light signal in a proportional scintillation detector remains well localized. With modest electric fields in xenon, the primary electrons from a photoelectric absorption of an X-ray can be brought a distance of a few millimeters to a higher field region without spreading more than a millimeter or so. Therefore, it is possible to make a proportional scintillation detector with good position sensitivity that could be used to calibrate out the difference in light collection over its sensitive volume.

  3. Cognitive and Metacognitive Aspects of Proportional Reasoning

    ERIC Educational Resources Information Center

    Modestou, Modestina; Gagatsis, Athanasios

    2010-01-01

    In this study we attempt to propose a new model of proportional reasoning based both on bibliographical and research data. This is impelled with the help of three written tests involving analogical, proportional, and non-proportional situations that were administered to pupils from grade 7 to 9. The results suggest the existence of a…

  4. Body proportions in children with Kabuki syndrome.

    PubMed

    Penders, Bas; Schott, Nina; Gerver, Willem-Jan M; Stumpel, Constance T R M

    2016-03-01

    Facial characteristics, short stature, and skeletal anomalies have been described for the clinical diagnosis of Kabuki Syndrome (KS) in children. However, no studies have investigated body proportions in KS. Knowledge of body proportions in KS may contribute to better insight into the growth pattern and characterization of this genetic disorder. Therefore we compared body proportions of children with KS to normally proportioned controls to investigate if atypical body proportions are part of this genetic disorder. This study was designed and conducted within the setting of the Maastricht University Medical Centre (MUMC+), the official Dutch expert center for Kabuki syndrome. We conducted a cross-sectional study in 32 children (11 children with KS and 21 controls). Body proportions were determined by means of photogrammetric anthropometry, measurements based on digital photography. Body proportions, quantified as body ratios, differ significantly in children with KS from normally proportioned children. Children with KS have larger heads and longer arms proportional to their trunks and have been found to have longer upper arms proportional to their tibia length and feet. Based on deviations in body proportions it was shown possible to discern children with KS from normally proportioned controls.

  5. Proportional counter windows for the Bragg Crystal Spectrometer on AXAF

    NASA Technical Reports Server (NTRS)

    Markert, T. H.; Bauer, J. M.; Canizares, C. R.; Isobe, T.; Nenonen, S.; O'Connor, J.; Schattenburg, M. L.; Flanagan, K. A.; Zombeck, M. V.

    1991-01-01

    A Bragg Crystal Spectrometer (BCS) using a gas flow proportional counter as its primary detector is among the instruments under development for AXAF. The BCS will employ windows of 1-micron-thick polyimide coated on both sides with 200 A of Al; this window composition, while X-ray transmitting, will leak gas at a lower rate than the polypropylene film-based windows formerly employed. Accounts are given of the results obtained with additional innovative X-ray window materials currently under development, including diamond and Si-enriched Si3N4.

  6. Multianode cylindrical proportional counter for high count rates

    DOEpatents

    Hanson, J.A.; Kopp, M.K.

    1980-05-23

    A cylindrical, multiple-anode proportional counter is provided for counting of low-energy photons (< 60 keV) at count rates of greater than 10/sup 5/ counts/sec. A gas-filled proportional counter cylinder forming an outer cathode is provided with a central coaxially disposed inner cathode and a plurality of anode wires disposed in a cylindrical array in coaxial alignment with and between the inner and outer cathodes to form a virtual cylindrical anode coaxial with the inner and outer cathodes. The virtual cylindrical anode configuration improves the electron drift velocity by providing a more uniform field strength throughout the counter gas volume, thus decreasing the electron collection time following the detection of an ionizing event. This avoids pulse pile-up and coincidence losses at these high count rates. Conventional RC position encoding detection circuitry may be employed to extract the spatial information from the counter anodes.

  7. Multianode cylindrical proportional counter for high count rates

    DOEpatents

    Hanson, James A.; Kopp, Manfred K.

    1981-01-01

    A cylindrical, multiple-anode proportional counter is provided for counting of low-energy photons (<60 keV) at count rates of greater than 10.sup.5 counts/sec. A gas-filled proportional counter cylinder forming an outer cathode is provided with a central coaxially disposed inner cathode and a plurality of anode wires disposed in a cylindrical array in coaxial alignment with and between the inner and outer cathodes to form a virtual cylindrical anode coaxial with the inner and outer cathodes. The virtual cylindrical anode configuration improves the electron drift velocity by providing a more uniform field strength throughout the counter gas volume, thus decreasing the electron collection time following the detection of an ionizing event. This avoids pulse pile-up and coincidence losses at these high count rates. Conventional RC position encoding detection circuitry may be employed to extract the spatial information from the counter anodes.

  8. Digital neutron radiography using plane converters with multiwire proportional chambers

    SciTech Connect

    Kaplan, S.N.; Director, B.A.; Perez-Mendez, V.; Valentine, K.H.

    1981-12-01

    The work described here was completed more than three years ago, and represents, in large part the PhD and MS thesis research of two of the present authors. Much of it has been reported previously elsewhere. It constitutes an effort to develop and study a moderately low cost, moderate resolution, high sensitivity, on-line method for digital neutron radiography, intended for use where neutron fluence was limited by source strength, or received dose. The basic imaging system consisted of a position-sensitive gas proportional chamber together with its associated imaging electronics, and a plane neutron converter. Enriched-boron, gadolinium, and polyethylene (for fast neutrons) converters were analyzed and tested. Some work was done on digital data enhancement, and efforts to improve spatial resolution included pressurizing the proportional-chamber gas to reduce the track lengths of the neutron-interaction products.

  9. Quench gases for xenon- (and krypton-) filled proportional counters

    NASA Technical Reports Server (NTRS)

    Ramsey, B. D.; Agrawal, P. C.

    1988-01-01

    Xenon-filled proportional counters are used extensively in astronomy, particularly in the hard X-ray region. The choice of quench gas can have a significant effect on the operating characteristics of the instrument although the data necessary to make the choice are not easily obtainable. Results which detail the performance obtained from both cylindrical and parallel field geometries for a wide variety of readily available, ultrahigh or research grade purity, quench gases are presented.

  10. Tree-augmented Cox proportional hazards models.

    PubMed

    Su, Xiaogang; Tsai, Chih-Ling

    2005-07-01

    We study a hybrid model that combines Cox proportional hazards regression with tree-structured modeling. The main idea is to use step functions, provided by a tree structure, to 'augment' Cox (1972) proportional hazards models. The proposed model not only provides a natural assessment of the adequacy of the Cox proportional hazards model but also improves its model fitting without loss of interpretability. Both simulations and an empirical example are provided to illustrate the use of the proposed method.

  11. CCSSM Challenge: Graphing Ratio and Proportion

    ERIC Educational Resources Information Center

    Kastberg, Signe E.; D'Ambrosio, Beatriz S.; Lynch-Davis, Kathleen; Mintos, Alexia; Krawczyk, Kathryn

    2013-01-01

    A renewed emphasis was placed on ratio and proportional reasoning in the middle grades in the Common Core State Standards for Mathematics (CCSSM). The expectation for students includes the ability to not only compute and then compare and interpret the results of computations in context but also interpret ratios and proportions as they are…

  12. Prospective Elementary School Teachers' Proportional Reasoning

    ERIC Educational Resources Information Center

    Valverde, Gabriela; Castro, Encarnación

    2012-01-01

    We present the findings of a study on prospective elementary teachers' proportional reasoning. After describing some of the teachers' performance in solving multiplicative structure problems that involve ratios and relations of direct proportionality between quantities, we were able to establish classifications of their answers according to…

  13. Examining Prospective Teachers' Understanding of Proportional Reasoning

    ERIC Educational Resources Information Center

    Kitchen, Richard; DePree, Julie

    2004-01-01

    In this article, the authors describe their efforts to assess prospective K-8 teachers' knowledge of proportional reasoning. Based upon their analysis of prospective K-8 teachers' work on a mathematics performance task, they discuss the implications for preparing prospective teachers to teach proportional reasoning to their students. In general,…

  14. Working Memory Mechanism in Proportional Quantifier Verification

    ERIC Educational Resources Information Center

    Zajenkowski, Marcin; Szymanik, Jakub; Garraffa, Maria

    2014-01-01

    The paper explores the cognitive mechanisms involved in the verification of sentences with proportional quantifiers (e.g. "More than half of the dots are blue"). The first study shows that the verification of proportional sentences is more demanding than the verification of sentences such as: "There are seven blue and eight yellow…

  15. Reassessing manual proportions in Australopithecus afarensis.

    PubMed

    Rolian, Campbell; Gordon, Adam D

    2013-11-01

    Previous analyses of hand morphology in Australopithecus afarensis have concluded that this taxon had modern human-like manual proportions, with relatively long thumbs and short fingers. These conclusions are based on the A.L.333 composite fossil assemblage from Hadar, Ethiopia, and are premised on the ability to assign phalanges to a single individual, and to the correct side and digit. Neither assignment is secure, however, given the taphonomy and sample composition at A.L.333. We use a resampling approach that includes the entire assemblage of complete hand elements at Hadar, and takes into account uncertainties in identifying phalanges by individual, side and digit number. This approach provides the most conservative estimates of manual proportions in Au. afarensis. We resampled hand long bone lengths in Au. afarensis and extant hominoids, and obtained confidence limits for distributions of manual proportions in the latter. Results confirm that intrinsic manual proportions in Au. afarensis are dissimilar to Pan and Pongo. However, manual proportions in Au. afarensis often fall at the upper end of the distribution in Gorilla, and very lower end in Homo, corresponding to disproportionately short thumbs and long medial digits in Homo. This suggests that manual proportions in Au. afarensis, particularly metacarpal proportions, were not as derived towards Homo as previously described, but rather are intermediate between gorillas and humans. Functionally, these results suggest Au. afarensis could not produce precision grips with the same efficiency as modern humans, which may in part account for the absence of lithic technology in this fossil taxon.

  16. Proportion of recovered waterfowl bands reported

    USGS Publications Warehouse

    Geis, A.D.; Atwood, E.L.

    1961-01-01

    Data from the annual mail survey of waterfowl hunters in the United States were used to estimate the total numbers of banded waterfowl that were shot. These estimates were compared with Banding Office records to estimate the proportion of recovered bands that was reported. On the average, about two banded birds were recovered for each one reported. The proportion reported was higher for some areas and for some species than for others. The proportion reported was higher when more of the reports came through employees of conservation agencies.

  17. Using Resampling to Compare Two Proportions

    ERIC Educational Resources Information Center

    Stephenson, W. Robert; Froelich, Amy G.; Duckworth, William M.

    2010-01-01

    This article shows that when applying resampling methods to the problem of comparing two proportions, students can discover that whether you resample with or without replacement can make a big difference.

  18. Proportionality, just war theory and weapons innovation.

    PubMed

    Forge, John

    2009-03-01

    Just wars are supposed to be proportional responses to aggression: the costs of war must not greatly exceed the benefits. This proportionality principle raises a corresponding 'interpretation problem': what are the costs and benefits of war, how are they to be determined, and a 'measurement problem': how are costs and benefits to be balanced? And it raises a problem about scope: how far into the future do the states of affairs to be measured stretch? It is argued here that weapons innovation always introduces costs, and that these costs cannot be determined in advance of going to war. Three examples, the atomic bomb, the AK-47 and the ancient Greek catapult, are given as examples. It is therefore argued that the proportionality principle is inapplicable prospectively. Some replies to the argument are discussed and rejected. Some more general defences of the proportionality principle are considered and also rejected. Finally, the significance of the argument for Just War Theory as a whole is discussed.

  19. Proportion estimation using prior cluster purities

    NASA Technical Reports Server (NTRS)

    Terrell, G. R. (Principal Investigator)

    1980-01-01

    The prior distribution of CLASSY component purities is studied, and this information incorporated into maximum likelihood crop proportion estimators. The method is tested on Transition Year spring small grain segments.

  20. Shielding concepts for low-background proportional counter arrays in surface laboratories

    SciTech Connect

    Aalseth, Craig E.; Humble, Paul H.; Mace, Emily K.; Orrell, John L.; Seifert, Allen; Williams, Richard M.

    2016-02-01

    Development of ultra low background gas proportional counters has made the contribution from naturally occurring radioactive isotopes – primarily and activity in the uranium and thorium decay chains – inconsequential to instrumental sensitivity levels when measurements are performed in above ground surface laboratories. Simple lead shielding is enough to mitigate against gamma rays as gas proportional counters are already relatively insensitive to naturally occurring gamma radiation. The dominant background in these surface laboratory measurements using ultra low background gas proportional counters is due to cosmic ray generated muons, neutrons, and protons. Studies of measurements with ultra low background gas proportional counters in surface and underground laboratories as well as radiation transport Monte Carlo simulations suggest a preferred conceptual design to achieve the highest possible sensitivity from an array of low background gas proportional counters when operated in a surface laboratory. The basis for a low background gas proportional counter array and the preferred shielding configuration is reported, especially in relation to measurements of radioactive gases having low energy decays such as 37Ar.

  1. Shielding concepts for low-background proportional counter arrays in surface laboratories.

    PubMed

    Aalseth, C E; Humble, P H; Mace, E K; Orrell, J L; Seifert, A; Williams, R M

    2016-02-01

    Development of ultra low background gas proportional counters has made the contribution from naturally occurring radioactive isotopes - primarily α and β activity in the uranium and thorium decay chains - inconsequential to instrumental sensitivity levels when measurements are performed in above ground surface laboratories. Simple lead shielding is enough to mitigate against gamma rays as gas proportional counters are already relatively insensitive to naturally occurring gamma radiation. The dominant background in these surface laboratory measurements using ultra low background gas proportional counters is due to cosmic ray generated muons, neutrons, and protons. Studies of measurements with ultra low background gas proportional counters in surface and underground laboratories as well as radiation transport Monte Carlo simulations suggest a preferred conceptual design to achieve the highest possible sensitivity from an array of low background gas proportional counters when operated in a surface laboratory. The basis for a low background gas proportional counter array and the preferred shielding configuration is reported, especially in relation to measurements of radioactive gases having low energy decays such as (37)Ar.

  2. Measurements of electron attachment by oxygen molecule in proportional counter

    NASA Astrophysics Data System (ADS)

    Tosaki, M.; Kawano, T.; Isozumi, Y.

    2013-11-01

    We present pulse height measurements for 5-keV Auger electrons from a radioactive 55Fe source mounted at the inner cathode surface of cylindrical proportional counter, which is operated with CH4 admixed dry air or N2. A clear shift of the pulse height has been observed by varying the amount of the admixtures; the number of electrons, created in the primary ionization by Auger electrons, is decreased by the electron attachment of the admixtures during their drift from the place near the source to the anode wire. The large gas amplification (typically 104) in the secondary ionization of proportional counter makes it possible to investigate a small change in the number of primary electrons. The electron attenuation cross-section of O2 has been evaluated by analyzing the shifts of the pulse height caused by the electron attachment to dry air and N2.

  3. Testing departure from Hardy-Weinberg proportions.

    PubMed

    Wang, Jian; Shete, Sanjay

    2012-01-01

    The Hardy-Weinberg principle, one of the most important principles in population genetics, was originally developed for the study of allele frequency changes in a population over generations. It is now, however, widely used in studies of human diseases to detect inbreeding, populations stratification, and genotyping errors. For assessment of deviation from the Hardy-Weinberg proportions in data, the most popular approaches include the asymptotic Pearson's chi-square goodness-of-fit test and the exact test. The Pearson's chi-square goodness-of-fit test is simple and straightforward, but it is very sensitive to small sample size or rare allele frequency. The exact test of Hardy-Weinberg proportions is preferable in these situations. The exact test can be performed through complete enumeration of heterozygote genotypes or on the basis of the Markov chain Monte Carlo procedure. In this chapter, we describe the Hardy-Weinberg principle and the commonly used Hardy-Weinberg proportions tests and their applications, and we demonstrate how the chi-square test and exact test of Hardy-Weinberg proportions can be performed step-by-step using the popular software programs SAS, R, and PLINK, which have been widely used in genetic association studies, along with numerical examples. We also discuss recent approaches for testing Hardy-Weinberg proportions in case-control study designs that are better than traditional approaches for testing Hardy-Weinberg proportions in controls only. Finally, we note that deviation from the Hardy-Weinberg proportions in affected individuals can provide evidence for an association between genetic variants and diseases.

  4. Progress in studying scintillator proportionality: Phenomenological model

    SciTech Connect

    Bizarri, Gregory; Cherepy, Nerine; Choong, Woon-Seng; Hull, Giulia; Moses, William; Payne, Sephen; Singh, Jai; Valentine, John; Vasilev, Andrey; Williams, Richard

    2009-04-30

    We present a model to describe the origin of non-proportional dependence of scintillator light yield on the energy of an ionizing particle. The non-proportionality is discussed in terms of energy relaxation channels and their linear and non-linear dependences on the deposited energy. In this approach, the scintillation response is described as a function of the deposited energy deposition and the kinetic rates of each relaxation channel. This mathematical framework allows both a qualitative interpretation and a quantitative fitting representation of scintillation non-proportionality response as function of kinetic rates. This method was successfully applied to thallium doped sodium iodide measured with SLYNCI, a new facility using the Compton coincidence technique. Finally, attention is given to the physical meaning of the dominant relaxation channels, and to the potential causes responsible for the scintillation non-proportionality. We find that thallium doped sodium iodide behaves as if non-proportionality is due to competition between radiative recombinations and non-radiative Auger processes.

  5. A multiwire proportional counter system for high energy astrophysics

    NASA Technical Reports Server (NTRS)

    Lacy, J. L.; Badhwar, G. D.; Deney, C. L.; Golden, R. L.

    1974-01-01

    Resolution tests of multiwire proportional counter delay line readout systems are reported. The system is being developed at NASA/JSC for use in a large balloon borne magnet spectrometer. The system is ultimately intended for use in Space Shuttle missions. Tests of two different types of delay line and associated electronics carried out in minimum ionizing particle beams (accelerator and sea level cosmic ray) are reported. Resolution performance is shown to be strongly dependent on type of gas mixture and in the case of inclined events upon the propagation velocity of the delay line. The resolution performance achieved for magic gas chamber filling (100 um at normal incidence) is far superior to any other state of the art technique capable of being applied to large geometry factor systems.

  6. Canine Conjectures: Using Data for Proportional Reasoning

    ERIC Educational Resources Information Center

    Westenskow, Arla; Moyer-Packenham, Patricia S.

    2011-01-01

    No person, place, or thing can capture the attention of a class of sixth graders like "man's best friend." To prompt students' interest in a series of lessons on proportional relationships, the authors brought in a unique teaching aid--a dog. A family dog was used to supply the measurements for scatter plots and variables so that students could…

  7. Tukey-Like Pairwise Comparisons among Proportions.

    ERIC Educational Resources Information Center

    Williams, Richard H.

    1992-01-01

    A QuickBASIC microcomputer program for conducting Tukey-like pairwise comparisons on "k" independent sample proportions is described. The program can accommodate applications involving equal or unequal sample sizes. Studentized range values are computed and displayed on a computer monitor, each of which represents a simple comparison…

  8. Kitchen Gardens: Contexts for Developing Proportional Reasoning

    ERIC Educational Resources Information Center

    Hilton, Annette; Hilton, Geoff; Dole, Shelley; Goos, Merrilyn; O'Brien, Mia

    2013-01-01

    It is great to see how the sharing of ideas sparks new ideas. In 2011 Lyon and Bragg wrote an "Australian Primary Mathematics Classroom" (APMC) article on the mathematics of kitchen gardens. In this article the authors show how the kitchen garden may be used as a starting point for proportional reasoning. The authors highlight different…

  9. Using Artwork to Explore Proportional Reasoning

    ERIC Educational Resources Information Center

    Bush, Sarah B.; Karp, Karen S.; Nadler, Jennifer; Gibbons, Katie

    2016-01-01

    Having an answer to "When are we ever going to use this in real life?" is important to middle school mathematics teachers. The activity described in this article awakened sixth graders' understanding of how artists use mathematics. By exploring ratio and proportionality in different paintings, students realized the use of proportional…

  10. Research on fluidics, valves, and proportional amplifiers

    NASA Technical Reports Server (NTRS)

    1974-01-01

    Research and development being conducted at the Systems and Controls Laboratory is reviewed. Static characteristics (supply, input, transfer, output, and noise characteristics) of laminar proportional amplifiers were investigated. Other topics discussed include velocity profiles for laminar fluidic jets, speed control systems employing a jet pipe valve, and power amplification with a vortex valve.

  11. Golden Proportions for the Generalized Tribonacci Numbers

    ERIC Educational Resources Information Center

    Shah, Devbhadra V.; Mehta, Darshana A.

    2009-01-01

    It is known that the ratios of consecutive terms of Fibonacci and Tribonacci sequences converge to the fixed ratio. In this article, we consider the generalized form of Tribonacci numbers and derive the "golden proportion" for the whole family of this generalized sequence. (Contains 2 tables.)

  12. Developing Essential Understanding of Ratios, Proportions, and Proportional Reasoning for Teaching Mathematics: Grades 6-8

    ERIC Educational Resources Information Center

    Lobato, Joanne; Ellis, Amy; Zbiek, Rose Mary

    2010-01-01

    How do you refute the erroneous claim that all ratios are fractions? This book goes beyond a simple introduction to ratios, proportions, and proportional reasoning. It will help broaden and deepen your mathematical understanding of one of the most challenging topics for students--and teachers--to grasp. It will help you engage your students,…

  13. Proportional reasoning competence among different student populations

    NASA Astrophysics Data System (ADS)

    Wong, King

    2012-10-01

    A collaborative project between Western Washington University, Rutgers University, and New Mexico State University seeks to understand student's competence level on proportional reasoning. We have been collecting and analyzing data from introductory physics and science education courses using a set of assessment tasks. We utilize the notion of constructs to categorize student thinking according to repetitive patterns. Results suggest that, when students confront ratio and proportion problems, they often experience a gap between the mechanics of the mathematical operations and the conscious understanding of what they are doing. In this poster we will share results of our findings from different courses, institutions, and student populations. Supported by NSF grants DUE-1045227, DUE-1045231, DUE-1045250..

  14. Gamma heating measurements with proportional counters

    SciTech Connect

    Chiu, H.; Bennett, E.F.; Micklich, B.J.

    1990-05-01

    A new data acquisition technique (the Continuously-varied Bias- voltage Acquisition mode) has been developed and tested for the low-flux broad-energy regime characteristic of existing fusion blanket mock-ups. This method of analysis allows for the acquisition of data spanning several orders of magnitude in energy with a single proportional counter. Utilizing this method, the gamma energy deposition in a mixed neutron and gamma field was measured. 7 refs., 5 figs.

  15. Evaluation of Facial Beauty Using Anthropometric Proportions

    PubMed Central

    Milutinovic, Jovana

    2014-01-01

    The improvement of a patient's facial appearance is one of the main goals of contemporary orthodontic treatment. The aim of this investigation was to evaluate the difference in facial proportions between attractive and anonymous females in order to establish objective facial features which are widely considered as beautiful. The study included two groups: first group consisted of 83 Caucasian female subjects between 22 and 28 years of age who were selected from the population of students at the University of Belgrade, and the second group included 24 attractive celebrity Caucasian females. The en face facial photographs were taken in natural head position (NHP). Numerous parameters were recorded on these photographs, in order to establish facial symmetry and correlation with the ideal set of proportions. This study showed significant difference between anonymous and attractive females. Attractive females showed smaller face in general and uniformity of the facial thirds and fifths, and most of the facial parameters meet the criteria of the ideal proportions. PMID:24701166

  16. NASA CONNECT: Proportionality: Modeling the Future

    NASA Technical Reports Server (NTRS)

    2000-01-01

    'Proportionality: Modeling the Future' is the sixth of seven programs in the 1999-2000 NASA CONNECT series. Produced by NASA Langley Research Center's Office of Education, NASA CONNECT is an award-winning series of instructional programs designed to enhance the teaching of math, science and technology concepts in grades 5-8. NASA CONNECT establishes the 'connection' between the mathematics, science, and technology concepts taught in the classroom and NASA research. Each program in the series supports the national mathematics, science, and technology standards; includes a resource-rich teacher guide; and uses a classroom experiment and web-based activity to complement and enhance the math, science, and technology concepts presented in the program. NASA CONNECT is FREE and the programs in the series are in the public domain. Visit our web site and register. http://connect.larc.nasa.gov 'Proportionality: Modeling the Future', students will examine how patterns, measurement, ratios, and proportions are used in the research, development, and production of airplanes.

  17. Some applications of the imaging proportional chamber

    NASA Astrophysics Data System (ADS)

    Charpak, G.; Dominik, W.; Fabre, J. P.; Gaudaen, J.; Peskov, V.

    1988-02-01

    Photons emitted by avalanches in gases can be detected with an image intensifier coupled to a solid-state camera. Some vapors enhance the emission at wavelengths close to the visible. Progress made in using this technique to image charged particles and Cherenkov photons is described. Results are presented for various gas mixtures containing TEA and TMAE.

  18. Proportional wire calorimeter for magnet pole tips

    SciTech Connect

    Kraus, D; Ludlam, T; Renardy, J; Willis, W; Zurfluh, E

    1980-01-01

    A total absorption calorimeter is designed to have magnetic properties comparable to those of ordinary steel, and thus can be incorporated into the poles of a spectrometer magnet without compromising the field quality. A test device has been built which consists of an iron structure penetrated by a finegrain pattern of holes, each acting as a proportional tube such that 90% of the volume is occupied by iron. Measurements of the energy and space resolution of this device in a high energy beam will be presented.

  19. Neutron spectrometry with He-3 proportional counters

    SciTech Connect

    Manolopoulou, M.; Fragopoulou, M.; Stoulos, S.; Vagena, E.; Westmeier, W.; Zamani, M.

    2011-07-01

    Helium filled proportional counters are widely used in the field of neutron detection and spectrometry. In this work the response of a commercially available He-3 counter is studied experimentally and calculated with Monte Carlo for the neutron energy range from 230 keV up to about 7 MeV. The calculated response of the system is used to determine neutron yield energy distribution emitted from an extended {sup nat}U/Pb assembly irradiated with 1.6 GeV deuterons. The results are in acceptable agreement with the calculated neutron distribution with DCM-DEM code. (authors)

  20. Energy Proportionality for Disk Storage Using Replication

    SciTech Connect

    Kim, Jinoh; Rotem, Doron

    2010-09-09

    Energy saving has become a crucial concern in datacenters as several reports predict that the anticipated energy costs over a three year period will exceed hardware acquisition. In particular, saving energy for storage is of major importance as storage devices (and cooling them off) may contribute over 25 percent of the total energy consumed in a datacenter. Recent work introduced the concept of energy proportionality and argued that it is a more relevant metric than just energy saving as it takes into account the tradeoff between energy consumption and performance. In this paper, we present a novel approach, called FREP (Fractional Replication for Energy Proportionality), for energy management in large datacenters. FREP includes areplication strategy and basic functions to enable flexible energy management. Specifically, our method provides performance guarantees by adaptively controlling the power states of a group of disks based on observed and predicted workloads. Our experiments, using a set of real and synthetic traces, show that FREP dramatically reduces energy requirements with a minimal response time penalty.

  1. Kalman-predictive-proportional-integral-derivative (KPPID)

    SciTech Connect

    Fluerasu, A.; Sutton, M.

    2004-12-17

    With third generation synchrotron X-ray sources, it is possible to acquire detailed structural information about the system under study with time resolution orders of magnitude faster than was possible a few years ago. These advances have generated many new challenges for changing and controlling the state of the system on very short time scales, in a uniform and controlled manner. For our particular X-ray experiments on crystallization or order-disorder phase transitions in metallic alloys, we need to change the sample temperature by hundreds of degrees as fast as possible while avoiding over or under shooting. To achieve this, we designed and implemented a computer-controlled temperature tracking system which combines standard Proportional-Integral-Derivative (PID) feedback, thermal modeling and finite difference thermal calculations (feedforward), and Kalman filtering of the temperature readings in order to reduce the noise. The resulting Kalman-Predictive-Proportional-Integral-Derivative (KPPID) algorithm allows us to obtain accurate control, to minimize the response time and to avoid over/under shooting, even in systems with inherently noisy temperature readings and time delays. The KPPID temperature controller was successfully implemented at the Advanced Photon Source at Argonne National Laboratories and was used to perform coherent and time-resolved X-ray diffraction experiments.

  2. Viking-Age Sails: Form and Proportion

    NASA Astrophysics Data System (ADS)

    Bischoff, Vibeke

    2017-01-01

    Archaeological ship-finds have shed much light on the design and construction of vessels from the Viking Age. However, the exact proportions of their sails remain unknown due to the lack of fully preserved sails, or other definite indicators of their proportions. Key Viking-Age ship-finds from Scandinavia—the Oseberg Ship, the Gokstad Ship and Skuldelev 3—have all revealed traces of rigging. In all three finds, the keelson—with the mast position—is preserved, together with fastenings for the sheets and the tack, indicating the breadth of the sail. The sail area can then be estimated based on practical experience of how large a sail the specific ship can carry, in conjunction with hull form and displacement. This article presents reconstructions of the form and dimensions of rigging and sail based on the archaeological finds, evidence from iconographic and written sources, and ethnographic parallels with traditional Nordic boats. When these sources are analysed, not only do the similarities become apparent, but so too does the relative disparity between the archaeological record and the other sources. Preferential selection in terms of which source is given the greatest merit is therefore required, as it is not possible to afford them all equal value.

  3. ProPortal: A Database for Prochlorococcus

    DOE Data Explorer

    Huang, Katherine [Chisholm lab, MIT

    Prochlorococcus is a marine cyanobacterium that numerically dominates the mid-latitude oceans, and is the smallest known oxygenic phototroph. All isolates described thus far can be assigned to either a tightly clustered high-light (HL) adapted clade, or a more divergent low-light (LL) adapted group. They are closely related to, but distinct from, marine Synechococcus. The genomes of 12 strains have been sequenced and they range in size from 1.6 to 2.6 Mbp. They represent diverse lineages, spanning the rRNA diversity (97 to 99.93% similarity) of cultured representatives of this group. Our analyses of these genomes inform our understanding of how adaptation occurs in the oceans along gradients of light, nutrients, and other environmental factors, providing essential context for interpreting rapidly expanding metagenomic datasets. [Copied from http://proportal.mit.edu/project/prochlorococcus/] ProPortal allows users to browse and search genome date for not only Prochlorococcus, but Cyanophage and Synechococcus. Microarray data, environmental cell concentration data, and metagenome information are also available.

  4. Novel concept for neutron detection: proportional counter filled with 10B nanoparticle aerosol

    NASA Astrophysics Data System (ADS)

    Amaro, F. D.; Monteiro, C. M. B.; Dos Santos, J. M. F.; Antognini, A.

    2017-02-01

    The high neutron detection efficiency, good gamma-ray discrimination and non-toxicity of 3He made of proportional counters filled with this gas the obvious choice for neutron detection, particularly in radiation portal monitors (RPM), used to control the illicit transport of nuclear material, of which neutron detectors are key components. 3He is very rare and during the last decade this gas has become increasingly difficult to acquire. With the exception of BF3, which is toxic, no other gas can be used for neutron detection in proportional counters. We present an alternative where the 3He atoms are replaced by nanoparticles made of another neutron sensitive material, 10B. The particles are dispersed in a gaseous volume, forming an aerosol with neutron sensitive properties. A proportional counter filled with such aerosol was exposed to a thermal neutron beam and the recorded response indicates that the neutrons have interacted with the particles in the aerosol. This original technique, which transforms a standard proportional gas mixture into a neutron sensitive aerosol, is a breakthrough in the field of radiation detection and has the potential to become an alternative to the use of 3He in proportional counters.

  5. Novel concept for neutron detection: proportional counter filled with (10)B nanoparticle aerosol.

    PubMed

    Amaro, F D; Monteiro, C M B; Dos Santos, J M F; Antognini, A

    2017-02-09

    The high neutron detection efficiency, good gamma-ray discrimination and non-toxicity of (3)He made of proportional counters filled with this gas the obvious choice for neutron detection, particularly in radiation portal monitors (RPM), used to control the illicit transport of nuclear material, of which neutron detectors are key components. (3)He is very rare and during the last decade this gas has become increasingly difficult to acquire. With the exception of BF3, which is toxic, no other gas can be used for neutron detection in proportional counters. We present an alternative where the (3)He atoms are replaced by nanoparticles made of another neutron sensitive material, (10)B. The particles are dispersed in a gaseous volume, forming an aerosol with neutron sensitive properties. A proportional counter filled with such aerosol was exposed to a thermal neutron beam and the recorded response indicates that the neutrons have interacted with the particles in the aerosol. This original technique, which transforms a standard proportional gas mixture into a neutron sensitive aerosol, is a breakthrough in the field of radiation detection and has the potential to become an alternative to the use of (3)He in proportional counters.

  6. Novel concept for neutron detection: proportional counter filled with 10B nanoparticle aerosol

    PubMed Central

    Amaro, F. D.; Monteiro, C. M. B.; dos Santos, J. M. F.; Antognini, A.

    2017-01-01

    The high neutron detection efficiency, good gamma-ray discrimination and non-toxicity of 3He made of proportional counters filled with this gas the obvious choice for neutron detection, particularly in radiation portal monitors (RPM), used to control the illicit transport of nuclear material, of which neutron detectors are key components. 3He is very rare and during the last decade this gas has become increasingly difficult to acquire. With the exception of BF3, which is toxic, no other gas can be used for neutron detection in proportional counters. We present an alternative where the 3He atoms are replaced by nanoparticles made of another neutron sensitive material, 10B. The particles are dispersed in a gaseous volume, forming an aerosol with neutron sensitive properties. A proportional counter filled with such aerosol was exposed to a thermal neutron beam and the recorded response indicates that the neutrons have interacted with the particles in the aerosol. This original technique, which transforms a standard proportional gas mixture into a neutron sensitive aerosol, is a breakthrough in the field of radiation detection and has the potential to become an alternative to the use of 3He in proportional counters. PMID:28181520

  7. Calibration and optimization of proportional counter modules using Garfield

    SciTech Connect

    Chung, Kiwhan; Brockwell, Michael I; Borozdin, Konstantin N; Green, J Andrew; Hogan, Gary E; Makela, Mark F; Mariam, Fesseha G; Morris, Christopher L

    2010-01-01

    Prototypes of radiation detector arrays used for charged-particle radiography require iniliol calibration to correlate the distribution of electron arrival time to the particle track locations. This step is crucial to obtaining the spatial resolution necessary to separate particle tracks traversing the individual proportional counters in the arrays. Our past attempts to use cosmic rays alone for the initial calibration have fallen short of obtaining the desired resolution due to the insufficient cosmic ray flux to provide the necessary number of particle tracks. A theoretical relation between electron drift time and radial drift distance is obtained with Garfield, a CERN gas detector simulation program. This relation is then used as an effective starting point for the initial calibration and results in a shorter calibration period and improved spatial resolution of the detectors.

  8. TRIAC/SCR proportional control circuit

    DOEpatents

    Hughes, Wallace J.

    1999-01-01

    A power controller device which uses a voltage-to-frequency converter in conjunction with a zero crossing detector to linearly and proportionally control AC power being supplied to a load. The output of the voltage-to frequency converter controls the "reset" input of a R-S flip flop, while an "0" crossing detector controls the "set" input. The output of the flip flop triggers a monostable multivibrator controlling the SCR or TRIAC firing circuit connected to the load. Logic gates prevent the direct triggering of the multivibrator in the rare instance where the "reset" and "set" inputs of the flip flop are in coincidence. The control circuit can be supplemented with a control loop, providing compensation for line voltage variations.

  9. TRIAC/SCR proportional control circuit

    DOEpatents

    Hughes, W.J.

    1999-04-06

    A power controller device is disclosed which uses a voltage-to-frequency converter in conjunction with a zero crossing detector to linearly and proportionally control AC power being supplied to a load. The output of the voltage-to frequency converter controls the ``reset`` input of a R-S flip flop, while an ``0`` crossing detector controls the ``set`` input. The output of the flip flop triggers a monostable multivibrator controlling the SCR or TRIAC firing circuit connected to the load. Logic gates prevent the direct triggering of the multivibrator in the rare instance where the ``reset`` and ``set`` inputs of the flip flop are in coincidence. The control circuit can be supplemented with a control loop, providing compensation for line voltage variations. 9 figs.

  10. A proportional temperature controller with automatic shutoff

    NASA Astrophysics Data System (ADS)

    Lucich, G. M.; Holland, P. W.

    1980-08-01

    A sensitive, proportional temperature controller useful in the temperature range from 40 to 400 C with an accuracy of plus or minus 0.1 C is described. It is potentially useful for regulating temperatures in air chambers, liquid baths, furnaces and reaction vessels and for other applications. This instrument was developed to control the duration and temperature of the heating cycle of a charcoal filled adsorber that is part of a special helium analyzer. The controller was made from commercially available parts and can be easily modified to provide continuous temperature control. The circuit is solid state and employs no electromechanical devices. Over a 2 year period of use as a component of the special helium analyzer, this temperature controller performed successfully and required no maintenance.

  11. Microstrip proportional counter development at MSFC

    NASA Technical Reports Server (NTRS)

    Fulton, M. A.; Kolodziejczak, J. J.; Ramsey, B. D.

    1992-01-01

    Microstrip detectors are an exciting new development in proportional counter design fabricated using integrated circuit-type photolithography techniques; they therefore offer very high spatial accuracy and uniformity. A development program is underway at NASA-Marshall to produce large-area microstrips for use in an X-ray detector balloon flight program and to investigate the general performance limits of these new devices. Microstrips tested so far have been fabricated both in-house using standard photolithographic techniques and by an outside contractor using electron beam technology. Various substrate materials have been tested along with different electrode configurations. The distributions of pickup on subdivided cathodes on both top and bottom surfaces of the microstrips are also being investigated for use as two-dimensional imaging detectors. Data from these tests in the development of a large-area device will be presented.

  12. Boron-10 Lined Proportional Counter Model Validation

    SciTech Connect

    Lintereur, Azaree T.; Siciliano, Edward R.; Kouzes, Richard T.

    2012-06-30

    The Department of Energy Office of Nuclear Safeguards (NA-241) is supporting the project “Coincidence Counting With Boron-Based Alternative Neutron Detection Technology” at Pacific Northwest National Laboratory (PNNL) for the development of an alternative neutron coincidence counter. The goal of this project is to design, build and demonstrate a boron-lined proportional tube-based alternative system in the configuration of a coincidence counter. This report discusses the validation studies performed to establish the degree of accuracy of the computer modeling methods current used to simulate the response of boron-lined tubes. This is the precursor to developing models for the uranium neutron coincidence collar under Task 2 of this project.

  13. Scaling and universality in proportional elections.

    PubMed

    Fortunato, Santo; Castellano, Claudio

    2007-09-28

    A most debated topic of the last years is whether simple statistical physics models can explain collective features of social dynamics. A necessary step in this line of endeavor is to find regularities in data referring to large-scale social phenomena, such as scaling and universality. We show that, in proportional elections, the distribution of the number of votes received by candidates is a universal scaling function, identical in different countries and years. This finding reveals the existence in the voting process of a general microscopic dynamics that does not depend on the historical, political, and/or economical context where voters operate. A simple dynamical model for the behavior of voters, similar to a branching process, reproduces the universal distribution.

  14. Exact tests for Hardy-Weinberg proportions.

    PubMed

    Engels, William R

    2009-12-01

    Exact conditional tests are often required to evaluate statistically whether a sample of diploids comes from a population with Hardy-Weinberg proportions or to confirm the accuracy of genotype assignments. This requirement is especially common when the sample includes multiple alleles and sparse data, thus rendering asymptotic methods, such as the common chi(2)-test, unreliable. Such an exact test can be performed using the likelihood ratio as its test statistic rather than the more commonly used probability test. Conceptual advantages in using the likelihood ratio are discussed. A substantially improved algorithm is described to permit the performance of a full-enumeration exact test on sample sizes that are too large for previous methods. An improved Monte Carlo algorithm is also proposed for samples that preclude full enumeration. These algorithms are about two orders of magnitude faster than those currently in use. Finally, methods are derived to compute the number of possible samples with a given set of allele counts, a useful quantity for evaluating the feasibility of the full enumeration procedure. Software implementing these methods, ExactoHW, is provided.

  15. Proportional mortality of 50 years and above

    PubMed Central

    Swaroop, S.; Uemura, K.

    1957-01-01

    In 1954 the United Nations Committee of Experts on International Definition and Measurement of Standards and Levels of Living suggested that for the measurement of levels of living quantifiable or potentially quantifiable components should be considered separately. An attempt is made in the present paper to evolve a single, comprehensive numerical indicator to quantify the component “health, including demographic conditions”. The use of an objective statistical technique as a guide in the selection of such an indicator is suggested. From the application of this technique, it is concluded that the percentage of deaths at the ages 50 years and over to total deaths (proportional mortality) affords a fairly suitable yardstick by which broad inter-country comparisons may be made. This indicator has the advantages of simplicity of calculation, comprehensiveness, availability of data, possibility of international comparability despite the varying quality of basic statistical information, sensitivity for the purpose of inter-country comparisons, and validity for studying levels and trends. PMID:13500159

  16. Debris and meteoroid proportions deduced from impact crater residue analysis

    SciTech Connect

    Berthoud, L.; Mandeville, J.C.; Durin, C.; Borg, J. |

    1995-02-01

    This study is a further investigation of space-exposed samples recovered from the LDEF satellite and the Franco-Russian `Aragatz` dust collection experiment on the Mir Space Station. Impact craters with diameters ranging from 1 to 900 micron were found on the retrieved samples. Elemental analysis of residues found in the impact craters was carried out using Energy Dispersive X-ray spectrometry (EDX). The analyses show evidence of micrometeoroid and orbital debris origins for the impacts. The proportions of these two components vary according to particle size and experimental position with respect to the leading edge of the spacecraft. On the LDEF leading edge 17 percent of the impacts were apparently caused by micrometeoroids and 11 percent by debris; on the LDEF trailing edge 23 percent of the impacts are apparently caused by micrometeoroids and 4 percent consist of debris particles - mostly larger than 3 micron in diameter - in elliptical orbits around the Earth. For Mir, the analyses indicate that micrometeoroids form 23 percent of impacts and debris 9 percent. However, the authors note that 60-70 percent of the craters are unidentifiable, so the definitive proportions of natural vs. man-made particles are yet to be determined. Experiments carried out using a light gas gun to accelerate glass spheres and fragments demonstrate the influence of particle shape on crater morphology. The experiments also show that it is more difficult to analyze the residues produced by an irregular fragment than those produced by a spherical projectile. If the particle is travelling above a certain velocity, it vaporizes upon impact and no residues are left. Simulation experiments carried out with an electrostatic accelerator indicate that this limit is about 14 km/s for Fe particles impacting Al targets. This chemical analysis cut-off may bias interpretations of the relative populations of meteoroid and orbital debris.

  17. Debris and meteoroid proportions deduced from impact crater residue analysis

    NASA Technical Reports Server (NTRS)

    Berthoud, Lucinda; Mandeville, Jean-Claude; Durin, Christian; Borg, Janet

    1995-01-01

    This study is a further investigation of space-exposed samples recovered from the LDEF satellite and the Franco-Russian 'Aragatz' dust collection experiment on the Mir Space Station. Impact craters with diameters ranging from 1 to 900 micron were found on the retrieved samples. Elemental analysis of residues found in the impact craters was carried out using Energy Dispersive X-ray spectrometry (EDX). The analyses show evidence of micrometeoroid and orbital debris origins for the impacts. The proportions of these two components vary according to particle size and experimental position with respect to the leading edge of the spacecraft. On the LDEF leading edge 17 percent of the impacts were apparently caused by micrometeoroids and 11 percent by debris; on the LDEF trailing edge 23 percent of the impacts are apparently caused by micrometeoroids and 4 percent consist of debris particles - mostly larger than 3 micron in diameter - in elliptical orbits around the Earth. For Mir, the analyses indicate that micrometeoroids form 23 percent of impacts and debris 9 percent. However, we note that 60-70 percent of the craters are unidentifiable, so the definitive proportions of natural v. man-made particles are yet to be determined. Experiments carried out using a light gas gun to accelerate glass spheres and fragments demonstrate the influence of particle shape on crater morphology. The experiments also show that it is more difficult to analyze the residues produced by an irregular fragment than those produced by a spherical projectile. If the particle is travelling above a certain velocity, it vaporizes upon impact and no residues are left. Simulation experiments carried out with an electrostatic accelerator indicate that this limit is about 14 km/s for Fe particles impacting Al targets. This chemical analysis cut-off may bias interpretations of the relative populations of meteoroid and orbital debris. Oblique impacts and multiple foil detectors provide a higher likelihood

  18. High efficiency proportional neutron detector with solid liner internal structures

    SciTech Connect

    Kisner, Roger Allen; Holcomb, David Eugene; Brown, Gilbert M.

    2014-08-05

    A tube-style neutron detector, a panel-style neutron detector incorporating a plurality of tube-style neutron detectors, and a panel-style neutron detector including a plurality of anode wires are provided. A plurality of channels is provided in a neutron detector such that each channel has an inner surface of a coating layer including a neutron-absorbing material. A wire anode is provided at end of each channel so that electrons generated by a charged daughter particle generated by a neutron are collected to detect a neutron-matter interaction. Moderator units can be incorporated into a neutron detector to provide improved detection efficiencies and/or to determine neutron energy spectrum. Gas-based proportional response from the neutron detectors can be employed for special nuclear material (SNM) detection. This neutron detector can provide similar performance to .sup.3He-based detectors without requiring .sup.3He and without containing toxic, flammable, or high-pressure materials.

  19. Mathematically modelling proportions of Japanese populations by industry

    NASA Astrophysics Data System (ADS)

    Hirata, Yoshito

    2016-10-01

    I propose a mathematical model for temporal changes of proportions for industrial sectors. I prove that the model keeps the proportions for the primary, the secondary, and the tertiary sectors between 0 and 100% and preserves their total as 100%. The model fits the Japanese historical data between 1950 and 2005 for the population proportions by industry very well. The model also predicts that the proportion for the secondary industry becomes negligible and becomes less than 1% at least around 2080.

  20. Proportion in Middle-School Mathematics: It's Everywhere

    ERIC Educational Resources Information Center

    Shield, Mal; Dole, Shelley

    2008-01-01

    Proportional thinking is the mathematical basis of a wide range of topics in the middle-school mathematics curriculum. While the concept is obvious in the traditionally-named ratio and proportion sections, proportional thinking is also the key to such diverse topics as rate, gradient of a linear function, similarity, trigonometry and percentage,…

  1. Spatial Proportional Reasoning Is Associated with Formal Knowledge about Fractions

    ERIC Educational Resources Information Center

    Möhring, Wenke; Newcombe, Nora S.; Levine, Susan C.; Frick, Andrea

    2016-01-01

    Proportional reasoning involves thinking about parts and wholes (i.e., about fractional quantities). Yet, research on proportional reasoning and fraction learning has proceeded separately. This study assessed proportional reasoning and formal fraction knowledge in 8- to 10-year-olds. Participants (N = 52) saw combinations of cherry juice and water…

  2. Evaluation of facial divine proportion in North Indian Population

    PubMed Central

    Khan, Naseem Ahmad; Nagar, Amit; Tandon, Pradeep; Singh, Gulshan Kumar; Singh, Alka

    2016-01-01

    Objective: To evaluate the facial divine proportion and its relationship with facial attractiveness in North Indian population. Materials and Methods: For evaluation of various facial proportions, standardized frontal facial photographs of total 300 subjects between 18 and 30 years of age were obtained. Black and white copies of these photographs were presented in front of an evaluation jury for assigning scores of facial attractiveness and finally 130 attractive subjects were selected. These subjects were divided into two groups, Group I (attractive females n = 65) and Group II (attractive males n = 65) and they were further analyzed for various parameters of facial proportions. Unpaired Student's t-test was used to compare both groups. Results: Group I showed that five of seven vertical facial proportions were close to divine proportion (1.618) whereas only two vertical proportions in Group II were close to it. Transverse facial proportions in both groups deviated more from divine proportion (1.618) and were closer to silver proportion (1.414). Conclusions: Most of the facial proportions of attractive females in the North-Indian population were close to the divine proportion. Thus, facial divine proportion could be an important factor in the perception of facial attractiveness of North-Indian attractive females. PMID:27630502

  3. Theoretical Investigation of a Proportional-Plus-Flicker Automatic Pilot

    NASA Technical Reports Server (NTRS)

    Seaberg, Ernest C.

    1950-01-01

    The proportional-plus-flicker automatic pilot operates by a nonlinear principle whereby a fast-acting flicker servomotor response is combined with a low-speed proportional servomotor response for the purpose of obtaining supersonic stability and control. Essentially, the autopilot maintains a zero reference about which the output is proportional to the input. However, a flicker response overrides this proportional response at a fixed angle of gimbal displacement on either side of the zero gyroscope reference. Therefore, in contrast to other high speed control systems, the design requirements are simplified because the two components of the proportional-flicker control system are easy to build separately and they can be combined in a relatively simple manner. By application of the proportional-flicker principle, satisfactory stability can be obtained by the proper adjustment of the variable factors in the autopilot mechanism; namely, the proportional gain, the amplitude of flicker control deflection, the autopilot time-lag factor (the time-lag between flicker and proportional operation), and the point in the range that the autopilot switches from a flicker to a proportional system. There is a possibility that these factors can be adjusted so that a more rapid response time (the time to reach steady state) is obtained with the non-linear proportional-flicker autopilot than with a purely linear proportional autopilot. For the main part of this analysis, the proportional part of the system is approximated by a zero-phase-lag proportional autopilot with the assumption that the control surface moves instantaneously at the point where the system switches from flicker to proportional. Good correlation is shown between the results obtained by this method and results obtained by using a close approximation of an actual autopilot transfer function for proportional autopilot operation.

  4. As-built design specification for proportion estimate software subsystem

    NASA Technical Reports Server (NTRS)

    Obrien, S. (Principal Investigator)

    1980-01-01

    The Proportion Estimate Processor evaluates four estimation techniques in order to get an improved estimate of the proportion of a scene that is planted in a selected crop. The four techniques to be evaluated were provided by the techniques development section and are: (1) random sampling; (2) proportional allocation, relative count estimate; (3) proportional allocation, Bayesian estimate; and (4) sequential Bayesian allocation. The user is given two options for computation of the estimated mean square error. These are referred to as the cluster calculation option and the segment calculation option. The software for the Proportion Estimate Processor is operational on the IBM 3031 computer.

  5. Students' Understanding of Proportional, Inverse Proportional, and Affine Functions: Two Studies on the Role of External Representations

    ERIC Educational Resources Information Center

    De Bock, Dirk; Van Dooren, Wim; Verschaffel, Lieven

    2015-01-01

    We investigated students' understanding of proportional, inverse proportional, and affine functions and the way this understanding is affected by various external representations. In a first study, we focus on students' ability to model textual descriptions of situations with different kinds of representations of proportional, inverse…

  6. Estimating sighting proportions of American alligator nests during helicopter survey

    USGS Publications Warehouse

    Rice, Kenneth G.; Percival, H. Franklin; Woodward, Allan R.

    2000-01-01

    Proportions of American alligator (Alligator mississippiensis) nests sighted during aerial survey in Florida were estimated based upon multiple surveys by different observers. We compared sighting proportions across habitats, nesting seasons, and observer experience levels. The mean sighting proportion across all habitats and years was 0.736 (SE=0.024). Survey counts corrected by the mean sighting proportion reliably predicted total nest counts (7?2=0.933). Sighting proportions did not differ by habitat type (P=0.668) or year P=0.328). Experienced observers detected a greater proportion of nests (P<0.0001) than did either less experienced or inexperienced observers. Reliable estimates of nest abundance can be derived from aerial counts of alligator nests when corrected by the appropriate sighting proportion.

  7. Alpha-beta monitoring system based on pair of simultaneous Multi-Wire Proportional Counters

    NASA Astrophysics Data System (ADS)

    Wengrowicz, U.; Amidan, D.; Orion, I.

    2016-08-01

    A new approach for a simultaneous alpha-beta Multi-wire Proportional Counter (MWPC) is presented. The popular approach for alpha-beta monitoring systems consists of a large area MWPC using noble gas flow such as Argon Methane. This method of measurement is effective but requires large-scale and expensive maintenance due to the needs of gas flow control and periodic replacements. In this work, a pair of simultaneous MWPCs for alpha-beta measuring is presented. The developed detector consists of a sealed gas MWPC sensor for beta particles, behind a free air alpha sensor. This approach allows effective simultaneous detection and discrimination of both alpha and beta radiation without the maintenance cost noble gas flow required for unsealed detectors.

  8. ³⁹Ar/Ar measurements using ultra-low background proportional counters.

    PubMed

    Hall, Jeter; Aalseth, Craig E; Bonicalzi, Ricco M; Brandenberger, Jill M; Day, Anthony R; Humble, Paul H; Mace, Emily K; Panisko, Mark E; Seifert, Allen

    2016-01-01

    Age-dating groundwater and seawater using the (39)Ar/Ar ratio is an important tool to understand water mass-flow rates and mean residence time. Low-background proportional counters developed at Pacific Northwest National Laboratory use mixtures of argon and methane as counting gas. We demonstrate sensitivity to (39)Ar by comparing geological (ancient) argon recovered from a carbon dioxide gas well and commercial argon. The demonstrated sensitivity to the (39)Ar/Ar ratio is sufficient to date water masses as old as 1000 years.

  9. 39Ar/Ar measurements using ultra-low background proportional counters

    SciTech Connect

    Hall, Jeter C.; Aalseth, Craig E.; Bonicalzi, Ricco; Brandenberger, Jill M.; Day, Anthony R.; Humble, Paul H.; Mace, Emily K.; Panisko, Mark E.; Seifert, Allen

    2016-01-08

    Age dating groundwater and seawater using 39Ar/Ar ratios is an important tool to understand water mass flow rates and mean residence time. For modern or contemporary argon, the 39Ar activity is 1.8 mBq per liter of argon. Radiation measurements at these activity levels require ultra low-background detectors. Low-background proportional counters have been developed at Pacific Northwest National Laboratory. These detectors use traditional mixtures of argon and methane as counting gas, and the residual 39Ar from commercial argon has become a predominant source of background activity in these detectors. We demonstrated sensitivity to 39Ar by using geological or ancient argon from gas wells in place of commercial argon. The low level counting performance of these proportional counters is then demonstrated for sensitivities to 39Ar/Ar ratios sufficient to date water masses as old as 1000 years.

  10. Observation of a striking departure from velocity proportionality in low-energy electronic stopping

    SciTech Connect

    Golser, R.; Semrad, D. )

    1991-04-08

    By time-of-flight spectrometry we have measured the energy loss of hydrogen projectiles in helium gas. We show that for projectile velocities {ital v}{sub 1} below the Bohr velocity the presence of an appreciable minimum excitation energy leads to a significant deviation of the electronic stopping cross section from the {ital v}{sub 1} proportionality generally assumed; at 4 keV a dependence on roughly the third power of {ital v}{sub 1} is found.

  11. Compact multiwire proportional counters for the detection of fission fragments

    SciTech Connect

    Jhingan, Akhil; Sugathan, P.; Golda, K. S.; Singh, R. P.; Varughese, T.; Singh, Hardev; Behera, B. R.; Mandal, S. K.

    2009-12-15

    Two large area multistep position sensitive (two dimensional) multiwire proportional counters have been developed for experiments involving study of fission dynamics using general purpose scattering chamber facility at IUAC. Both detectors have an active area of 20x10 cm{sup 2} and provide position signals in horizontal (X) and vertical (Y) planes, timing signal for time of flight measurements and energy signal giving the differential energy loss in the active volume. The design features are optimized for the detection of low energy heavy ions at very low gas pressures. Special care was taken in setting up the readout electronics, constant fraction discriminators for position signals in particular, to get optimum position and timing resolutions along with high count rate handling capability of low energy heavy ions. A custom made charge sensitive preamplifier, having lower gain and shorter decay time, has been developed for extracting the differential energy loss signal. The position and time resolutions of the detectors were determined to be 1.1 mm full width at half maximum (FWHM) and 1.7 ns FWHM, respectively. The detector could handle heavy ion count rates exceeding 20 kHz without any breakdown. Time of flight signal in combination with differential energy loss signal gives a clean separation of fission fragments from projectile and target like particles. The timing and position signals of the detectors are used for fission coincidence measurements and subsequent extraction of their mass, angular, and total kinetic energy distributions. This article describes systematic study of these fission counters in terms of efficiency, time resolution, count rate handling capability, position resolution, and the readout electronics. The detector has been operated with both five electrode geometry and four electrode geometry, and a comparison has been made in their performances.

  12. Initial evaluation of proportional scintillation in liquid Xenon for direct dark matter detection

    NASA Astrophysics Data System (ADS)

    Ye, T.; Giboni, K. L.; Ji, X.

    2014-12-01

    The Liquid Xenon Time Projection Chamber (LXeTPC) is often seen as an ideal detector for the direct Dark Matter (DM) search. In such experiments an efficient γ-ray background discrimination is essential. This can be achieved by distinguishing the ionization density, different for γ-rays and Nuclear Recoils. Two quantities are used for this measurement, the direct scintillation light generated by the ionizing event, and the free charges swept away by an electric field before recombination occurs. Present LXe detectors apply the Dual Phase principle, i.e. the charges are extracted into the gas phase and are measured by the proportional light they produce in a strong electric field in the gas. With ever growing dimensions of the detectors it is difficult to meet the tight mechanical tolerances required. Proportional scintillation also occurs in the liquid phase, although at much higher field strengths. Such field strengths can be reached in the 1/r field close to thin wires. All the limitations due to the extraction of electrons into the gas phase are avoided. Since the liquid level has not to be crossed, the design of the detector becomes simpler with many advantages over Dual Phase detectors. Our initial tests clearly show the pulses. They are much shorter, and their length is limited by longitudinal diffusion of the drifting charges. The threshold for proportional light production seems significantly lower, and estimates of the gain are more favorable than previously predicted. We attribute these discrepancies to our improved liquid purity.

  13. 34 CFR Appendix to Part 81 - Illustrations of Proportionality

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 34 Education 1 2013-07-01 2013-07-01 false Illustrations of Proportionality Appendix to Part 81 Education Office of the Secretary, Department of Education GENERAL EDUCATION PROVISIONS ACT-ENFORCEMENT Pt. 81, App. Appendix to Part 81—Illustrations of Proportionality (1) Ineligible beneficiaries. A...

  14. 34 CFR Appendix to Part 81 - Illustrations of Proportionality

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 34 Education 1 2012-07-01 2012-07-01 false Illustrations of Proportionality Appendix to Part 81 Education Office of the Secretary, Department of Education GENERAL EDUCATION PROVISIONS ACT-ENFORCEMENT Pt. 81, App. Appendix to Part 81—Illustrations of Proportionality (1) Ineligible beneficiaries. A...

  15. 34 CFR Appendix to Part 81 - Illustrations of Proportionality

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 34 Education 1 2014-07-01 2014-07-01 false Illustrations of Proportionality Appendix to Part 81 Education Office of the Secretary, Department of Education GENERAL EDUCATION PROVISIONS ACT-ENFORCEMENT Pt. 81, App. Appendix to Part 81—Illustrations of Proportionality (1) Ineligible beneficiaries. A...

  16. Longitudinal Enrollment Dynamics and Changes in Ethnic Proportionality.

    ERIC Educational Resources Information Center

    Greaves, Fred

    The Federal Racial/Ethnic Surveys of the Salinas Union High School District were examined to identify changes in ethnic proportions within a particular class from its entry in the 9th grade until the 12th grade. The 9th, 10th, 11th, and 12th grade proportional distributions are reported by school (Alisal High School, North Salinas High School, and…

  17. The Failings of the Law of Definite Proportions

    ERIC Educational Resources Information Center

    Suchow, Lawrence

    1975-01-01

    Indicates that the concept of definite proportions or constant composition should be introduced with qualification. Presents arguments against the Law of Definite Proportions and cites examples in the areas of solid solutions, compounds of the transition and inner transition elements, and in some compounds of the representative elements. (GS)

  18. The Fibonacci Sequence: Proportional Semantic Bases of Children's Aesthetic Preferences.

    ERIC Educational Resources Information Center

    Neperud, Ronald W.; Serlin, Ronald C.

    1984-01-01

    Only at the third- and seventh-grade levels did proportional preferences for Fibonacci figures differ significantly from preferences for other kinds of proportional spatial divisions. Semantic patterns were similar among third and fifth graders, with a change occurring between fifth and seventh grades in keeping with the development of formal…

  19. Understanding Proportional Reasoning in Pre-Service Teachers

    ERIC Educational Resources Information Center

    Johnson, Kim H.

    2013-01-01

    The purpose of this study is to examine the proportional reasoning of pre-service teachers at the beginning of their teacher preparation program using the developmental shifts described by Lobato and Ellis (2010). They cast changes in proportional reasoning as transitions or "shifts" in students' thinking and these shifts can serve as…

  20. Development of proportional reasoning: where young children go wrong.

    PubMed

    Boyer, Ty W; Levine, Susan C; Huttenlocher, Janellen

    2008-09-01

    Previous studies have found that children have difficulty solving proportional reasoning problems involving discrete units until 10 to 12 years of age, but can solve parallel problems involving continuous quantities by 6 years of age. The present studies examine where children go wrong in processing proportions that involve discrete quantities. A computerized proportional equivalence choice task was administered to kindergartners through 4th-graders in Study 1, and to 1st- and 3rd-graders in Study 2. Both studies involved 4 between-subjects conditions that were formed by pairing continuous and discrete target proportions with continuous and discrete choice alternatives. In Study 1, target and choice alternatives were presented simultaneously; in Study 2, target and choice alternatives were presented sequentially. In both studies, children performed significantly worse when both the target and choice alternatives were represented with discrete quantities than when either or both of the proportions involved continuous quantities. Taken together, these findings indicate that children go astray on proportional reasoning problems involving discrete units only when a numerical match is possible, suggesting that their difficulty is due to an overextension of numerical equivalence concepts to proportional equivalence problems.

  1. Development of Proportional Reasoning: Where Young Children Go Wrong

    PubMed Central

    Boyer, Ty W.; Levine, Susan C.; Huttenlocher, Janellen

    2008-01-01

    Previous studies have found that children have difficulty solving proportional reasoning problems involving discrete units until 10- to 12-years of age, but can solve parallel problems involving continuous quantities by 6-years of age. The present studies examine where children go wrong in processing proportions that involve discrete quantities. A computerized proportional equivalence choice task was administered to kindergartners through fourth-graders in Study 1, and to first- and third-graders in Study 2. Both studies involved four between-subjects conditions that were formed by pairing continuous and discrete target proportions with continuous and discrete choice alternatives. In Study 1, target and choice alternatives were presented simultaneously and in Study 2 target and choice alternatives were presented sequentially. In both studies, children performed significantly worse when both the target and choice alternatives were represented with discrete quantities than when either or both of the proportions involved continuous quantities. Taken together, these findings indicate that children go astray on proportional reasoning problems involving discrete units only when a numerical match is possible, suggesting that their difficulty is due to an overextension of numerical equivalence concepts to proportional equivalence problems. PMID:18793078

  2. An array of low-background 3He proportional counters for the Sudbury Neutrino Observatory

    NASA Astrophysics Data System (ADS)

    Amsbaugh, J. F.; Anaya, J. M.; Banar, J.; Bowles, T. J.; Browne, M. C.; Bullard, T. V.; Burritt, T. H.; Cox-Mobrand, G. A.; Dai, X.; Deng, H.; Di Marco, M.; Doe, P. J.; Dragowsky, M. R.; Duba, C. A.; Duncan, F. A.; Earle, E. D.; Elliott, S. R.; Esch, E.-I.; Fergani, H.; Formaggio, J. A.; Fowler, M. M.; Franklin, J. E.; Geissbühler, P.; Germani, J. V.; Goldschmidt, A.; Guillian, E.; Hallin, A. L.; Harper, G.; Harvey, P. J.; Hazama, R.; Heeger, K. M.; Heise, J.; Hime, A.; Howe, M. A.; Huang, M.; Kormos, L. L.; Kraus, C.; Krauss, C. B.; Law, J.; Lawson, I. T.; Lesko, K. T.; Loach, J. C.; Majerus, S.; Manor, J.; McGee, S.; Miknaitis, K. K. S.; Miller, G. G.; Morissette, B.; Myers, A.; Oblath, N. S.; O'Keeffe, H. M.; Ollerhead, R. W.; Peeters, S. J. M.; Poon, A. W. P.; Prior, G.; Reitzner, S. D.; Rielage, K.; Robertson, R. G. H.; Skensved, P.; Smith, A. R.; Smith, M. W. E.; Steiger, T. D.; Stonehill, L. C.; Thornewell, P. M.; Tolich, N.; VanDevender, B. A.; Van Wechel, T. D.; Wall, B. L.; Wan Chan Tseung, H.; Wendland, J.; West, N.; Wilhelmy, J. B.; Wilkerson, J. F.; Wouters, J. M.

    2007-09-01

    An array of Neutral-Current Detectors (NCDs) has been built in order to make a unique measurement of the total active flux of solar neutrinos in the Sudbury Neutrino Observatory (SNO). Data in the third phase of the SNO experiment were collected between November 2004 and 2006, after the NCD array was added to improve the neutral-current sensitivity of the SNO detector. This array consisted of 36 strings of proportional counters filled with a mixture of 3He and CF 4 gas capable of detecting the neutrons liberated by the neutrino-deuteron neutral-current reaction in the D 2O, and four strings filled with a mixture of 4He and CF 4 gas for background measurements. The proportional counter diameter is 5 cm. The total deployed array length was 398 m. The SNO NCD array is the lowest-radioactivity large array of proportional counters ever produced. This article describes the design, construction, deployment, and characterization of the NCD array, discusses the electronics and data acquisition system, and considers event signatures and backgrounds.

  3. An array of low-background 3He proportional counters for theSudbury Neutrino Observatory

    SciTech Connect

    Amsbaugh, J.F.; Anaya, J.M.; Banar, J.; Bowles, T.J.; Browne,M.C.; Bullard, T.V.; Burritt, T.H.; Cox-Mobrand, G.A.; Dai, X.; H.Deng,X.; Di Marco, M.; Doe, P.J.; Dragowsky, M.R.; Duba, C.A.; Duncan, F.A.; Earle, E.D.; Elliott, S.R.; Esch, E.-I.; Fergani, H.; Formaggio, J.A.; Fowler, M.M.; Franklin, J.E.; Geissbuehler, P.; Germani, J.V.; Goldschmidt, A.; Guillian, E.; Hallin, A.L.; Harper, G.; Harvey, P.J.; Hazama, R.; Heeger, K.M.; Heise, J.; Hime, A.; Howe, M.A.; Huang, M.; Kormos, L.L.; Kraus, C.; Krauss, C.B.; Law, J.; Lawson, I.T.; Lesko,K.T.; Loach, J.C.; Majerus, S.; Manor, J.; McGee, S.; Miknaitis, K.K.S.; Miller, G.G.; Morissette, B.; Myers, A.; Oblath, N.S.; O'Kee, H.M.; Ollerhead, R.W.; Peeters, S.J.M.; Poon, A.W.P.; Prior, G.; Reitzner,S.D.; Rielage, K.; Robertson, R.G.H.; Skensved, P.; Smith, A.R.; Smith,M.W.E.; Steiger, T.D.; Stonehill,L.C.; Thornewell, P.M.; Tolich, N.; VanDevender, B.A.; VanWechel, T.D.; Wall, B.L.; Tseung, H.W.C.; Wendland,J.; West, N.; Wilhelmy, J.B.; Wilkerson, J.F.; Wouters, J.M.

    2007-02-01

    An array of Neutral-Current Detectors (NCDs) has been builtin order to make a unique measurement of the total active ux of solarneutrinos in the Sudbury Neutrino Observatory (SNO). Data in the thirdphase of the SNO experiment were collected between November 2004 andNovember 2006, after the NCD array was added to improve theneutral-current sensitivity of the SNO detector. This array consisted of36 strings of proportional counters lled with a mixture of 3He and CF4gas capable of detecting the neutrons liberated by the neutrino-deuteronneutral current reaction in the D2O, and four strings lled with a mixtureof 4He and CF4 gas for background measurements. The proportional counterdiameter is 5 cm. The total deployed array length was 398 m. The SNO NCDarray is the lowest-radioactivity large array of proportional countersever produced. This article describes the design, construction,deployment, and characterization of the NCD array, discusses theelectronics and data acquisition system, and considers event signaturesand backgrounds.

  4. Proportionality: a valid alternative to correlation for relative data.

    PubMed

    Lovell, David; Pawlowsky-Glahn, Vera; Egozcue, Juan José; Marguerat, Samuel; Bähler, Jürg

    2015-03-01

    In the life sciences, many measurement methods yield only the relative abundances of different components in a sample. With such relative-or compositional-data, differential expression needs careful interpretation, and correlation-a statistical workhorse for analyzing pairwise relationships-is an inappropriate measure of association. Using yeast gene expression data we show how correlation can be misleading and present proportionality as a valid alternative for relative data. We show how the strength of proportionality between two variables can be meaningfully and interpretably described by a new statistic ϕ which can be used instead of correlation as the basis of familiar analyses and visualisation methods, including co-expression networks and clustered heatmaps. While the main aim of this study is to present proportionality as a means to analyse relative data, it also raises intriguing questions about the molecular mechanisms underlying the proportional regulation of a range of yeast genes.

  5. Proportionality: A Valid Alternative to Correlation for Relative Data

    PubMed Central

    Lovell, David; Pawlowsky-Glahn, Vera; Egozcue, Juan José; Marguerat, Samuel; Bähler, Jürg

    2015-01-01

    In the life sciences, many measurement methods yield only the relative abundances of different components in a sample. With such relative—or compositional—data, differential expression needs careful interpretation, and correlation—a statistical workhorse for analyzing pairwise relationships—is an inappropriate measure of association. Using yeast gene expression data we show how correlation can be misleading and present proportionality as a valid alternative for relative data. We show how the strength of proportionality between two variables can be meaningfully and interpretably described by a new statistic ϕ which can be used instead of correlation as the basis of familiar analyses and visualisation methods, including co-expression networks and clustered heatmaps. While the main aim of this study is to present proportionality as a means to analyse relative data, it also raises intriguing questions about the molecular mechanisms underlying the proportional regulation of a range of yeast genes. PMID:25775355

  6. Operability test report for 211BA flow proportional sampler

    SciTech Connect

    Weissenfels, R.D.

    1995-01-01

    This operability report will verify that the 211-BA flow proportional sampler functions as intended by design. The sampler was installed by Project W-007H and is part of BAT/AKART for the BCE liquid effluent stream.

  7. A Weighted Harmonic Means Analysis for the Proportional Unbalanced Design.

    ERIC Educational Resources Information Center

    Bonett, Douglas G.

    1982-01-01

    A weighted harmonic means analysis is presented that incorporates all of the available data, preserves the planned proportionality of the design, and avoids the problems associated with the replacement of missing data with sample estimates. (Author/BW)

  8. Proportion effect in diblock co-oligomer molecular diodes

    NASA Astrophysics Data System (ADS)

    Hu, G. C.; Zhang, G. P.; Li, Y.; Ren, J. F.; Wang, C. K.

    2014-10-01

    Based on ab-initio theory and nonequilibrium Green's function method, the effect of proportion on the rectification in pyrimidinyl-phenyl diblock co-oligomer diodes is investigated in two regimes. For a short co-oligomer diode, it is found that the 1:1 proportion of the two moieties favors the largest rectification ratio. For a long co-oligomer diode, an interesting proportion-dependent variation of the rectifying direction is observed. Furthermore, the optimal proportion for the largest rectification ratio is not 1:1 any longer. A deep understanding can be achieved by analyzing the bias-dependent transmission spectra combined with the evolution of the molecular orbitals.

  9. DC motor proportional control system for orthotic devices

    NASA Technical Reports Server (NTRS)

    Blaise, H. T.; Allen, J. R.

    1972-01-01

    Multi-channel proportional control system for operation of dc motors for use with externally-powered orthotic arm braces is described. Components of circuitry and principles of operation are described. Schematic diagram of control circuit is provided.

  10. Improvements in estimating proportions of objects from multispectral data

    NASA Technical Reports Server (NTRS)

    Horwitz, H. M.; Hyde, P. D.; Richardson, W.

    1974-01-01

    Methods for estimating proportions of objects and materials imaged within the instantaneous field of view of a multispectral sensor were developed further. Improvements in the basic proportion estimation algorithm were devised as well as improved alien object detection procedures. Also, a simplified signature set analysis scheme was introduced for determining the adequacy of signature set geometry for satisfactory proportion estimation. Averaging procedures used in conjunction with the mixtures algorithm were examined theoretically and applied to artificially generated multispectral data. A computationally simpler estimator was considered and found unsatisfactory. Experiments conducted to find a suitable procedure for setting the alien object threshold yielded little definitive result. Mixtures procedures were used on a limited amount of ERTS data to estimate wheat proportion in selected areas. Results were unsatisfactory, partly because of the ill-conditioned nature of the pure signature set.

  11. Proportional reasoning in the learning of chemistry: levels of complexity

    NASA Astrophysics Data System (ADS)

    Ramful, Ajay; Narod, Fawzia Bibi

    2014-03-01

    This interdisciplinary study sketches the ways in which proportional reasoning is involved in the solution of chemistry problems, more specifically, problems involving quantities in chemical reactions (commonly referred to as stoichiometry problems). By building on the expertise of both mathematics and chemistry education research, the present paper shows how the theoretical constructs in proportional reasoning in mathematics education offer rich explanatory accounts of the complexities involved in solving stoichiometry problems. Using Vergnaud's concept of measure spaces, the theoretical analysis shows that proportionality situations are relatively more intricate, involving various layers of complexity in chemistry as compared to those in the mathematics curriculum. Knowledge of proportionality and chemistry are simultaneously required to provide solutions to chemical reactions. Our analysis of a range of stoichiometry situations led us to propose a problem analysis framework involving five levels of difficulty. Further, the specificity of proportionality in stoichiometry is that it can only be established when quantities are interpreted in the unit "mole," a unit which does not have any physical embodiment in terms of a measure of quantity unlike mass and volume. Our analysis of student-teachers' solution to the stoichiometry problems, shows that they tend to incorrectly (probably intuitively) set proportional relationships when two quantities in a reaction are expressed in non-molar quantities such as mass. The data also bring to the fore the primarily formulaic approach that student-teachers use in setting inherent proportionality relationships. An important finding is the interpretation of a chemical equation as a mathematical equation, rather than a statement of proportionality.

  12. Statistical distribution of the difference of two proportions.

    PubMed

    Nadarajah, Saralees; Kotz, Samuel

    2007-08-15

    Differences of two proportions or rates occur most frequently in biomedical research. However, as far as published work in the Statistics in Medicine are concerned, only approximations have been used to study the distribution of such differences. In this Letter, we derive the exact probability distribution of the difference of two proportions. The expression involves a well-known special function. It is expected that this result could be widely useful for medical practitioners.

  13. Evaluation of B10Plus+* proportional detectors for neutron coincidence counting

    SciTech Connect

    Beddingfield, David H.; Yoon, Seokryung

    2015-07-01

    GE-Reuter-Stokes (GERS) has developed a new line of neutron proportional counters, the B10Plus+* proportional counter. The detector design is intended to serve as a cost-effective alternative to traditional {sup 3}He proportional counters in a variety of applications. The detector is a hybrid design 10B-lined tube optimized with the addition of a small quantity of 3He gas to improve the detector performance and efficiency. As a demonstration of the B10Plus+* detector, GERS has constructed a Uranium Neutron Collar (UNCL) system consisting of B-10Plus+* proportional counters. GERS has designed and built a demonstration UNCL system intended to match the performance of a Type-I UNCL design in Pressurized Water Reactor (PWR) geometry operating in thermal mode. GERS offered their system on loan to the International Atomic Energy Agency (IAEA) Safeguards Division of Technical and Scientific Services for an assessment of the detector technology and the demonstration system. We have characterized the demonstration UNCL system and compared its performance with a traditional Type-I UNCL design in regular use by the IAEA. This paper summarizes our findings and observations during the characterization and testing activity. (authors)

  14. Empirical study of alginate impression materials by customized proportioning system

    PubMed Central

    2016-01-01

    PURPOSE Alginate mixers available in the market do not have the automatic proportioning unit. In this study, an automatic proportioning unit for the alginate mixer and controller software were designed and produced for a new automatic proportioning unit. With this device, it was ensured that proportioning operation could arrange weight-based alginate impression materials. MATERIALS AND METHODS The variation of coefficient in the tested groups was compared with the manual proportioning. Compression tension and tear tests were conducted to determine the mechanical properties of alginate impression materials. The experimental data were statistically analyzed using one way ANOVA and Tukey test at the 0.05 level of significance. RESULTS No statistically significant differences in modulus of elastisity (P>0.3), tensional/compresional strength (P>0.3), resilience (P>0.2), strain in failure (P>0.4), and tear energy (P>0.7) of alginate impression materials were seen. However, a decrease in the standard deviation of tested groups was observed when the customized machine was used. To verify the efficiency of the system, powder and powder/water mixing were weighed and significant decrease was observed. CONCLUSION It was possible to obtain more mechanically stable alginate impression materials by using the custom-made proportioning unit. PMID:27826387

  15. Calibration of an ultra-low-background proportional counter for measuring {sup 37}Ar

    SciTech Connect

    Seifert, A.; Aalseth, C. E.; Bonicalzi, R. M.; Bowyer, T. W.; Day, A. R.; Fuller, E. S.; Haas, D. A.; Hayes, J. C.; Hoppe, E. W.; Humble, P. H.; Keillor, M. E.; LaFerriere, B. D.; Mace, E. K.; McIntyre, J. I.; Merriman, J. H.; Miley, H. S.; Myers, A. W.; Orrell, J. L.; Overman, C. T.; Panisko, M. E.; and others

    2013-08-08

    An ultra-low-background proportional counter design has been developed at Pacific Northwest National Laboratory (PNNL) using clean materials, primarily electro-chemically-purified copper. This detector, along with an ultra-low-background counting system (ULBCS), was developed to complement a new shallow underground laboratory (30 meters water-equivalent) at PNNL. The ULBCS design includes passive neutron and gamma shielding, along with an active cosmic-veto system. This system provides a capability for making ultra-sensitive measurements to support applications like age-dating soil hydrocarbons with {sup 14}C/{sup 3}H, age-dating of groundwater with {sup 39}Ar, and soil-gas assay for {sup 37}Ar to support On-Site Inspection (OSI). On-Site Inspection is a key component of the verification regime for the Comprehensive Nuclear-Test-Ban Treaty (CTBT). Measurements of radionuclides created by an underground nuclear explosion are valuable signatures of a Treaty violation. For OSI, the 35-day half-life of {sup 37}Ar, produced from neutron interactions with calcium in soil, provides both high specific activity and sufficient time for inspection before decay limits sensitivity. This work describes the calibration techniques and analysis methods developed to enable quantitative measurements of {sup 37}Ar samples over a broad range of proportional counter operating pressures. These efforts, along with parallel work in progress on gas chemistry separation, are expected to provide a significant new capability for {sup 37}Ar soil gas background studies.

  16. Calibration of an ultra-low-background proportional counter for measuring 37Ar

    NASA Astrophysics Data System (ADS)

    Seifert, A.; Aalseth, C. E.; Bonicalzi, R. M.; Bowyer, T. W.; Day, A. R.; Fuller, E. S.; Haas, D. A.; Hayes, J. C.; Hoppe, E. W.; Humble, P. H.; Keillor, M. E.; LaFerriere, B. D.; Mace, E. K.; McIntyre, J. I.; Merriman, J. H.; Miley, H. S.; Myers, A. W.; Orrell, J. L.; Overman, C. T.; Panisko, M. E.; Williams, R. M.

    2013-08-01

    An ultra-low-background proportional counter design has been developed at Pacific Northwest National Laboratory (PNNL) using clean materials, primarily electro-chemically-purified copper. This detector, along with an ultra-low-background counting system (ULBCS), was developed to complement a new shallow underground laboratory (30 meters water-equivalent) at PNNL. The ULBCS design includes passive neutron and gamma shielding, along with an active cosmic-veto system. This system provides a capability for making ultra-sensitive measurements to support applications like age-dating soil hydrocarbons with 14C/3H, age-dating of groundwater with 39Ar, and soil-gas assay for 37Ar to support On-Site Inspection (OSI). On-Site Inspection is a key component of the verification regime for the Comprehensive Nuclear-Test-Ban Treaty (CTBT). Measurements of radionuclides created by an underground nuclear explosion are valuable signatures of a Treaty violation. For OSI, the 35-day half-life of 37Ar, produced from neutron interactions with calcium in soil, provides both high specific activity and sufficient time for inspection before decay limits sensitivity. This work describes the calibration techniques and analysis methods developed to enable quantitative measurements of 37Ar samples over a broad range of proportional counter operating pressures. These efforts, along with parallel work in progress on gas chemistry separation, are expected to provide a significant new capability for 37Ar soil gas background studies.

  17. Nepalese Esthetic Dental (NED) Proportion in Nepalese Population.

    PubMed

    Rokaya, D; Kitisubkanchana, J; Wonglamsam, A; Santiwong, P; Srithavaj, T; Humagain, M

    2015-01-01

    Background Lots of studies on maxillary anterior teeth proportions have been studied in different populations in various countries, but no studies have been conducted in Nepal on the esthetic maxillary anterior teeth proportions. Objective The study was done to investigate the maxillary anterior teeth proportions in a Nepalese population. Teeth proportions in the total population were compared with golden proportion (GP) and golden standard (GS). Method A total of 150 Nepalese subjects were divided in three facial types; broad, average and narrow group. Maxillary anterior teeth were measured from dental casts using digital calipers. The perceived width ratios of lateral to central incisor (LI/CI) and canine to lateral incisor (CN/LI), ratios of mean central incisor length to 2 central incisor widths (CIL/2CIW), and actual width to length ratios (WLRs) (%) were calculated in each facial type and compared. Mean LI/CI, CN/LI and CIL/2CIW in total population were calculated and compared with GP (0.618), and mean WLRs in the total population were compared with GS (80%). All teeth proportions were compared among three facial types. One-sample t-test and one-way ANOVA were performed to analyze the data (α = 0.05). Result The LI/CI, CN/LI, CIL/2CIW and WLRs in three facial types showed no significant difference. The LI/CI, CN/LI and CIL/2CIW in the total population were 66%, 70% and 55% respectively, and were significantly different from GP. The WLRs for CI, LI and CN in the total population were 90%, 86% and 89% respectively and significantly differed from GS. These values were considered to constitute the Nepalese Esthetic Dental (NED) proportion. Conclusion No significant difference of maxillary anterior teeth proportions were observed among three facial types. Teeth proportions in the total population significantly differed from GP and GS. We propose the NED proportion as a guideline for dental treatment in the maxillary anterior region in Nepalese populations.

  18. ["Golden proportion" and its application to calculate dentition].

    PubMed

    Vadachkoriia, N R; Gumberidze, N Sh; Mandzhavidze, N A

    2007-01-01

    Within an evolutionary process, the nature has created the standard of aesthetics - a "gold proportion" on the basis of which, the parts of human body, to be more exact, teeth and denture correspond to each other and to own parts by the size, which is the ideal precondition for ideal appearance. The charming smile serves as the proof, that teeth in denture are located by a principle of "gold proportion". A "gold proportion" is the corner stone of beauty and it can be applied with success in stomatology. Proportion is the certain ratio between parts, and proportional means a proper correlation of parts among themselves. It is reputed, that knowledge about "gold proportion" Pythagor has got from products of the Egyptian and Babylon scientists. And this is true, proportions of cult constructions, bas-relieves, pyramids in Giza, home appliances and ornaments from Tutanhamon tomb testify, that under their creation the Egyptian masters were guided by a principle of "gold proportion". The facade of ancient Greek temple Parthenon is built by a principle of "gold proportion". During archeological digs of this temple the compasses which sculptors and architects of an ancient world used has been found. The "gold proportion" is mentioned in the work which has reached us "Beginning" the author is the scientist of antique epoch Euclid. In 1509, in Venice the book of Luka Pacholi the "Divine proportion" has been published, its illustration is attributed to Leonardo de Vinci. This work has been recognized as a "Hymn of a gold proportion". In 1885 the German researcher professor Zeising published his work - "Aesthetic researches". When Zeising has received numerical values of piece length, he saw that they coincided with figures of some numerical sequence, which was offered by the great Italian mathematician of Middle Ages Fibonacci (or Leonardo Pisano). In his composition the "Abacus Book" Leonardo Fibonacci showed aforesaid sequence of numbers, by means of which he has explained

  19. Limb-size proportions in Australopithecus afarensis and Australopithecus africanus.

    PubMed

    Green, David J; Gordon, Adam D; Richmond, Brian G

    2007-02-01

    Previous analyses have suggested that Australopithecus africanus possessed more apelike limb proportions than Australopithecus afarensis. However, due to the errors involved in estimating limb length and body size, support for this conclusion has been limited. In this study, we use a new Monte Carlo method to (1) test the hypothesis that A. africanus had greater upper:lower limb-size proportions than A. afarensis and (2) assess the statistical significance of interspecific differences among these taxa, extant apes, and humans. Our Monte Carlo method imposes sampling constraints that reduce extant ape and human postcranial measurements to sample sizes comparable to the fossil samples. Next, composite ratios of fore- and hindlimb geometric means are calculated for resampled measurements from the fossils and comparative taxa. Mean composite ratios are statistically indistinguishable (alpha=0.05) from the actual ratios of extant individuals, indicating that this method conserves each sample's central tendency. When applied to the fossil samples, upper:lower limb-size proportions in A. afarensis are similar to those of humans (p=0.878) and are significantly different from all great ape proportions (p< or =0.034), while Australopithecus africanus is more similar to the apes (p> or =0.180) and significantly different from humans and A. afarensis (p< or =0.031). These results strongly support the hypothesis that A. africanus possessed more apelike limb-size proportions than A. afarensis, suggesting that A. africanus either evolved from a more postcranially primitive ancestor than A. afarensis or that the more apelike limb-size proportions of A. africanus were secondarily derived from an A. afarensis-like ancestor. Among the extant taxa, limb-size proportions correspond with observed levels of forelimb- and hindlimb-dominated positional behaviors. In conjunction with detailed anatomical features linked to arboreality, these results suggest that arboreal posture and

  20. Assessment of facial golden proportions among central Indian population

    PubMed Central

    Saurabh, Rathore; Piyush, Bolya; Sourabh, Bhatt; Preeti, Ojha; Trivedi, Rutvik; Vishnoi, Pradeep

    2016-01-01

    Aim: This study aimed to identify and establish the facial and smile proportions in young adults and to compare the results with ideal or divine proportions, compare the proportions of males and females included in our study population and compare them with those established for Caucasian and Japanese populations. Materials and Methods: Two hundred participants (164 females, 36 males) with Angle's class I malocclusion (M.O). and well-balanced faces were selected and photographed in the frontal repose position. Analysis was done in Adobe Photoshop software. Statistical analysis was done using the Statistical Package for the Social Sciences version 17.0. (IBM Corporation Armonk, New York, United States). Results: Results suggested that females are more near to ideal ratios and males are more deviated from the ideal ratios. The proportions of males and females were not considerably different from each other. In Indian population, upper 3rd facial height (TR-LC) was increased and mid-face height (LC-LN) was decreased; in lower 3rd of the face, LN-CH was slightly increased in comparison to CH-ME. In facial widths, outer canthal width (LC-LC) was greater in the Indian population and mouth width (CH-CH) was normal. When compared with Indian population, Japanese participants had wider noses, outer canthal distance, and bitemporal width. Conclusion: It was concluded that significant difference was found between the proportions of the Indian population and ideal ratio. When Indian population was compared with Japanese and Caucasian populations, some parameters of facial proportions showed significant difference, which leads to the need for establishing standardized norms for various facial proportions in Indian population. PMID:28217534

  1. Limb proportions show developmental plasticity in response to embryo movement

    PubMed Central

    Pollard, A. S.; Charlton, B. G.; Hutchinson, J. R.; Gustafsson, T.; McGonnell, I. M.; Timmons, J. A.; Pitsillides, A. A.

    2017-01-01

    Animals have evolved limb proportions adapted to different environments, but it is not yet clear to what extent these proportions are directly influenced by the environment during prenatal development. The developing skeleton experiences mechanical loading resulting from embryo movement. We tested the hypothesis that environmentally-induced changes in prenatal movement influence embryonic limb growth to alter proportions. We show that incubation temperature influences motility and limb bone growth in West African Dwarf crocodiles, producing altered limb proportions which may, influence post-hatching performance. Pharmacological immobilisation of embryonic chickens revealed that altered motility, independent of temperature, may underpin this growth regulation. Use of the chick also allowed us to merge histological, immunochemical and cell proliferation labelling studies to evaluate changes in growth plate organisation, and unbiased array profiling to identify specific cellular and transcriptional targets of embryo movement. This disclosed that movement alters limb proportions and regulates chondrocyte proliferation in only specific growth plates. This selective targeting is related to intrinsic mTOR (mechanistic target of rapamycin) pathway activity in individual growth plates. Our findings provide new insights into how environmental factors can be integrated to influence cellular activity in growing bones and ultimately gross limb morphology, to generate phenotypic variation during prenatal development. PMID:28165010

  2. How well proportioned are lens and prism spaces?

    NASA Astrophysics Data System (ADS)

    Aurich, R.; Lustig, S.

    2012-09-01

    The cosmic microwave background (CMB) anisotropies in spherical 3-spaces with a non-trivial topology are analysed with a focus on lens- and prism-shaped fundamental cells. The conjecture is tested that well-proportioned spaces lead to a suppression of large-scale anisotropies according to the observed CMB. The focus is put on lens spaces L(p, q) which are supposed to be oddly proportioned. However, there are inhomogeneous lens spaces whose shape of the Voronoi domain depends on the position of the observer within the manifold. Such manifolds possess no fixed measure of the well-proportioned property and allow a predestined test of the well-proportioned conjecture. Topologies having the same Voronoi domain are shown to possess distinct CMB statistics which thus provide a counter-example to the well-proportioned conjecture. The CMB properties are analysed in terms of cyclic subgroups Zp, and a new point of view for the superior behaviour of the Poincaré dodecahedron is found.

  3. Collaboration promotes proportional reasoning about resource distribution in young children.

    PubMed

    Ng, Rowena; Heyman, Gail D; Barner, David

    2011-09-01

    The authors investigated how children and adults evaluate the "niceness" of individuals who engage in resource distribution, with a focus on their sensitivity to the proportion of resources given. Across 3 experiments, subjects evaluated the niceness of a child who gave a quantity of pennies to another child. In Study 1 (N = 30), adults showed sensitivity to the proportion given, whereas 5- and 7-year-old children did not. In Study 2 (N = 74), both younger (3- to 5-year-old) and older (6- to 8-year-old) children were sensitive to proportion only when resources were earned by a giver in collaboration with the recipient rather than by the giver alone. Adults, however, were sensitive to proportion in both cases. In Study 3 (N = 44), the authors tested 5- and 6-year-olds and their parents to be sure that socioeconomic and ethnic differences between samples did not drive results and replicated key findings from Studies 1 and 2. Together, these findings indicate that children favor proportional resource distribution in situations that invoke intuitions about equity. The authors suggest that these intuitions may form the basis for adult notions of fairness and generosity.

  4. Limb proportions show developmental plasticity in response to embryo movement.

    PubMed

    Pollard, A S; Charlton, B G; Hutchinson, J R; Gustafsson, T; McGonnell, I M; Timmons, J A; Pitsillides, A A

    2017-02-06

    Animals have evolved limb proportions adapted to different environments, but it is not yet clear to what extent these proportions are directly influenced by the environment during prenatal development. The developing skeleton experiences mechanical loading resulting from embryo movement. We tested the hypothesis that environmentally-induced changes in prenatal movement influence embryonic limb growth to alter proportions. We show that incubation temperature influences motility and limb bone growth in West African Dwarf crocodiles, producing altered limb proportions which may, influence post-hatching performance. Pharmacological immobilisation of embryonic chickens revealed that altered motility, independent of temperature, may underpin this growth regulation. Use of the chick also allowed us to merge histological, immunochemical and cell proliferation labelling studies to evaluate changes in growth plate organisation, and unbiased array profiling to identify specific cellular and transcriptional targets of embryo movement. This disclosed that movement alters limb proportions and regulates chondrocyte proliferation in only specific growth plates. This selective targeting is related to intrinsic mTOR (mechanistic target of rapamycin) pathway activity in individual growth plates. Our findings provide new insights into how environmental factors can be integrated to influence cellular activity in growing bones and ultimately gross limb morphology, to generate phenotypic variation during prenatal development.

  5. Use of tissue equivalent proportional counters to characterize radiation quality on the space shuttle

    SciTech Connect

    Braby, L.A.; Conroy, T.J.; Elegy, D.C.; Brackenbush, L.W.

    1992-04-01

    Tissue equivalent proportional counters (TEPC) are essentially cavity ionization chambers operating at low pressure and with gas gain. A small, battery powered, TEPC spectrometer, which records lineal energy spectra at one minute intervals, has been used on several space shuttle missions. The data it has collected clearly show the South Atlantic anomaly and indicate a mean quality factor somewhat higher than expected. An improved type of instrument has been developed with sufficient memory to record spectra at 10 second intervals, and with increased resolution for low LET events. This type of instrument will be used on most future space shuttle flights and in some international experiments.

  6. Simulations of electron avalanches in an ultra-low-background proportional counter

    SciTech Connect

    Robinson, John W.; Aalseth, Craig; Dion, Michael P.; Overman, Cory; Seifert, Allen; VanDevender, Brent

    2016-02-01

    New classes have been added to the simulation package Garfield++ to import the potential and electric field solutions generated by ANSYS R MaxwellTM v.16. Using these tools we report results on the simulation of electron avalanches and induced signal waveforms in comparison to experimental data of the ultra-lowbackground gas proportional counters being developed at Pacific Northwest National Laboratory. Furthermore, an improved mesh search algorithm based on Delaunay triangulation was implemented and provided at least a three order of magnitude time savings when compared to the built-in point-location search class of Garfield++.

  7. Estimating Regression Parameters in an Extended Proportional Odds Model

    PubMed Central

    Chen, Ying Qing; Hu, Nan; Cheng, Su-Chun; Musoke, Philippa; Zhao, Lue Ping

    2012-01-01

    The proportional odds model may serve as a useful alternative to the Cox proportional hazards model to study association between covariates and their survival functions in medical studies. In this article, we study an extended proportional odds model that incorporates the so-called “external” time-varying covariates. In the extended model, regression parameters have a direct interpretation of comparing survival functions, without specifying the baseline survival odds function. Semiparametric and maximum likelihood estimation procedures are proposed to estimate the extended model. Our methods are demonstrated by Monte-Carlo simulations, and applied to a landmark randomized clinical trial of a short course Nevirapine (NVP) for mother-to-child transmission (MTCT) of human immunodeficiency virus type-1 (HIV-1). Additional application includes analysis of the well-known Veterans Administration (VA) Lung Cancer Trial. PMID:22904583

  8. Safety studies on hydraulic proportional valves with electrical position feedback.

    PubMed

    Reinert, Dietmar; Kimura, Tetsuya; Gorgs, Karl-Josef

    2006-01-01

    The authors analysed a proportional valve with electrical position feedback for its failure behaviour. Several failures were introduced into the feedback loop, especially into the 2 solenoids and the inductive position transducer. The behaviour of the valve for square and ramp reference signals was recorded and systematically analysed. It was shown that failures could be detected by monitoring the residual signal from the equipment under control or the residual signal from the sensor. It was possible to achieve the safe position within twice the normal response time of the valve by switching off the current of both solenoids. The application of these results for a new generation of safe proportional valves is discussed. The use of the results of these investigations obviates the need for redundancy of the electrical position monitoring arrangement in a safe proportional valve.

  9. Leg length, proportion, health and beauty: a review.

    PubMed

    Bogin, Barry; Varela-Silva, Maria Inês

    2009-12-01

    Decomposing stature into its major components is proving to be a useful strategy to assess the antecedents of disease, morbidity and death in adulthood. Human leg length (foot + tibia + femur), sitting height (trunk length + head length) and their proportions (for example the relative leg length in proportion to stature, and the sitting height ratio [sitting height/stature x 100], among others) are used as epidemiological markers of risk for overweight (fatness), coronary heart disease, diabetes and certain cancers. There is also wide support for the use of relative leg length as an indicator of the quality of the environment for growth during infancy, childhood and the juvenile years of development. Human beings follow a cephalo-caudal gradient of growth, the pattern of growth common to all mammals. A special feature of the human pattern is that between birth and puberty the legs grow relatively faster than other post-cranial body segments. For groups of children and youth, short stature due to relatively short legs (i.e. a high sitting height ratio) is generally a marker of an adverse environment. The development of human body proportions is the product of environmental x genomic interactions, although few if any specific genes are known. The short stature homeobox-containing gene (SHOX) is the first genomic region that may be relevant to human body proportions. For example, one of the SHOX related disorders is Turner syndrome. However, in most cases research has been showing that environment is a more powerful force to shape leg length and body proportions than genes. Leg length and proportion are important in the perception of human beauty, which is often considered a sign of health and fertility. There are a variety of cosmetic, fashion, and surgical interventions to enhance perceived or actual leg length.

  10. New method of proportional counter feedback biasing for wide-range radiation dose-rate monitors

    SciTech Connect

    Kopp, M.K.; Valentine, K.H.; Guerrant, G.C.; Manning, F.W.

    1984-01-01

    A prototypic wide-range radiation dose-rate monitor for civil defense applications has been developed and tested. The specified dose-rate range (0 to 500 R/h) was displayed on a single readout scale by using feedback-controlled biasing of a proportional counter. This new method is based on controlling the avalanche multiplication factor (gas gain) of the counter by varying its bias voltage in response to its measured output current (i.e., detected dose rate). The counter output current varies between 0 and 1.5 nA in a quasi-logarithmic response to dose rates between 0 and 500 R/h. The corresponding values of gas gain and bias voltage range from 1 to 300 and 200 to 1900 V respectively.

  11. High-resolution position-sensitive proportional counter camera for radiochromatographic imaging

    SciTech Connect

    Schuresko, D.D.; Kopp, M.K.; Harter, J.A.; Bostick, W.D.

    1988-12-01

    A high-resolution proportional counter camera for imaging two- dimensional (2-D) distributions of radionuclides is described. The camera can accommodate wet or dry samples that are separated from the counter gas volume by a 6-..mu..m Mylar membrane. Using 95% Xe-5% CO/sub 2/ gas at 3-MPa pressure and electronic collimation based upon pulse energy discrimination, the camera's performance characteristics for /sup 14/C distributions are as follows: active area--10 by 10 cm, position resolution--0.5 mm, total background--300 disintegrations per minute, and count-rate capability--10/sup 5/ disintegrations per second. With computerized data acquisition, the camera is a significant improvement in analytical instrumentation for imaging 2-D radionuclide distributions over present-day commercially available technology. (Note: This manuscript was completed in July 1983). 13 refs., 10 figs.

  12. Evaluation of Bayesian Sequential Proportion Estimation Using Analyst Labels

    NASA Technical Reports Server (NTRS)

    Lennington, R. K.; Abotteen, K. M. (Principal Investigator)

    1980-01-01

    The author has identified the following significant results. A total of ten Large Area Crop Inventory Experiment Phase 3 blind sites and analyst-interpreter labels were used in a study to compare proportional estimates obtained by the Bayes sequential procedure with estimates obtained from simple random sampling and from Procedure 1. The analyst error rate using the Bayes technique was shown to be no greater than that for the simple random sampling. Also, the segment proportion estimates produced using this technique had smaller bias and mean squared errors than the estimates produced using either simple random sampling or Procedure 1.

  13. From Graphical to Mathematical: The Spiral of Golden Proportion

    ERIC Educational Resources Information Center

    Fletcher, Rodney

    2007-01-01

    There has been a lot of material written about logarithmic spirals of golden proportion but this author states that he has never come across an article that states the exact equation of the spiral which ultimately spirals tangentially to the sides of the rectangles. In this article, the author intends to develop such an equation. (Contains 5…

  14. The relation between spatial thinking and proportional reasoning in preschoolers.

    PubMed

    Möhring, Wenke; Newcombe, Nora S; Frick, Andrea

    2015-04-01

    Previous research has indicated a close link between spatial and mathematical thinking. However, what shared processes account for this link? In this study, we focused on the spatial skill of map reading and the mathematical skill of proportional reasoning and investigated whether scaling, or the ability to relate information in different-sized representations, is a shared process. Scaling was experimentally manipulated in both tasks. In the map task, 4- and 5-year-olds (N=50) were asked to point to the same position shown on a map in a larger referent space on a touch screen. The sizes of the maps were varied systematically, such that some trials required scaling and some did not (i.e., the map had the same size as the referent space). In the proportional reasoning task, children were presented with different relative amounts of juice and water and were asked to estimate each mixture on a rating scale. Again, some trials required scaling, but others could be solved by directly mapping the proportional components onto the rating scale. Children's absolute errors in locating targets in the map task were closely related to their performance in the proportional reasoning task even after controlling for age and verbal intelligence. Crucially, this was only true for trials that required scaling, whereas performance on nonscaled trials was not related. These results shed light on the mechanisms involved in the close connection between spatial and mathematical thinking early in life.

  15. Prospective Elementary Teachers' Misunderstandings in Solving Ratio and Proportion Problems

    ERIC Educational Resources Information Center

    Monteiro, Cecilia

    2003-01-01

    This study explores difficulties that prospective elementary mathematics teachers have with the concepts of ratio and proportion, mainly when they are engaged in solving problems using algorithm procedures. These difficulties can be traced back to earlier experiences when they were students of junior and high school. The reflection on these…

  16. Proportional Reasoning in the Learning of Chemistry: Levels of Complexity

    ERIC Educational Resources Information Center

    Ramful, Ajay; Narod, Fawzia Bibi

    2014-01-01

    This interdisciplinary study sketches the ways in which proportional reasoning is involved in the solution of chemistry problems, more specifically, problems involving quantities in chemical reactions (commonly referred to as stoichiometry problems). By building on the expertise of both mathematics and chemistry education research, the present…

  17. Simulation of dynamics of hydraulic system with proportional control valve

    NASA Astrophysics Data System (ADS)

    Bureček, Adam; Hružík, Lumír; Vašina, Martin

    2016-03-01

    Dynamics of a hydraulic system is influenced by several parameters, in this case mainly by proportional control valve, oil bulk modulus, oil viscosity, mass load etc. This paper will be focused on experimental measurement and mathematical simulation of dynamics of a hydraulic system with proportional control valve, linear hydraulic cylinder and mass load. The measurement is performed on experimental equipment that enables realization of dynamic processes of the hydraulic system. Linear hydraulic cylinder with mass load is equipped with position sensor of piston. The movement control of piston rod is ensured by the proportional control valve. The equipment enables to test an influence of parameter settings of regulator of the proportional control valve on position and pressure system responses. The piston position is recorded by magnetostrictive sensor that is located in drilled piston rod side of the linear hydraulic cylinder. Pressures are measured by piezoresistive sensors on the piston side and the piston rod side of the hydraulic cylinder. The measurement is performed during movement of the piston rod with mass load to the required position. There is realized and verified a mathematical model using Matlab SimHydraulics software for this hydraulic system.

  18. Spatio-temporal patterns of proportions of influenza B cases

    PubMed Central

    He, Daihai; Chiu, Alice P. Y.; Lin, Qianying; Yu, Duo

    2017-01-01

    We studied the spatio-temporal patterns of the proportions of influenza B cases out of all typed cases, with data from 139 countries and regions downloaded from the FluNet compiled by the World Health Organization, from January 2006 to October 2015. We restricted our analysis to 34 countries that reported more than 2,000 confirmations for each of types A and B over the study period. Globally, we found that Pearson’s correlation is greater than 0.6 between effective distance from Mexico and the proportions of influenza B cases among the countries during the post-pandemic era (i.e. Week 1, 2010 to Week 40, 2015). Locally, in the United States, the proportions of influenza B cases in the pre-pandemic period (2003–2008) negatively correlated with that in the post-pandemic era (2010–2015) at the regional level. Our study limitations are the country-level variations in both surveillance methods and testing policies. The proportions of influenza B cases displayed wide variations over the study period. Our findings suggest that the 2009 influenza pandemic has an evident impact on the relative burden of the two influenza types. Future studies should examine whether there are other additional factors. This study has potential implications in prioritizing public health control measures. PMID:28067277

  19. Map Scale, Proportion, and Google[TM] Earth

    ERIC Educational Resources Information Center

    Roberge, Martin C.; Cooper, Linda L.

    2010-01-01

    Aerial imagery has a great capacity to engage and maintain student interest while providing a contextual setting to strengthen their ability to reason proportionally. Free, on-demand, high-resolution, large-scale aerial photography provides both a bird's eye view of the world and a new perspective on one's own community. This article presents an…

  20. Macroevolutionary diversity of amniote limb proportions predicted by developmental interactions.

    PubMed

    Young, Nathan M

    2013-11-01

    Mammals, birds, and reptiles exhibit a remarkable diversity of limb proportions. These evolved differences are thought to reflect selection for biomechanical, postural, and locomotor requirements primarily acting on independent variation in later fetal and postnatal segmental growth. However, earlier conserved developmental events also have the potential to impact the evolvability of limb proportions by limiting or biasing initial variation among segments. Notably, proximo-distal patterning of the amniote limb through activation-inhibition dynamics predicts that initial proportions of segments should exhibit both tradeoffs between stylopod and autopod and a diagnostic reduction in variance of the zeugopod. Here it is demonstrated that this developmental "design rule" predicts patterns of macroevolutionary diversity despite the effects of variation in segmental growth over ontogeny, lineage-specific differences in phylogenetic history, or functional adaptation. These results provide critical comparative evidence of a conserved Turing-like mechanism in proximo-distal limb segmentation, and suggest that development has played a previously unrecognized role in the evolvability of limb proportions in a wide range of amniote taxa.

  1. An Investigation of Proportional Reasoning Skills of Middle School Students

    ERIC Educational Resources Information Center

    Ozgun-Koca, S. Asli; Altay, Mesture Kayhan

    2009-01-01

    The purpose of this study was to examine the proportional reasoning skills of Turkish middle school students. It was also aimed at revealing the differences in students' performances in terms of their gender, grade level, and problem types--missing value and numerical comparison. The study was conducted with two sixth and seventh grade classes…

  2. The Structure of Prospective Kindergarten Teachers' Proportional Reasoning

    ERIC Educational Resources Information Center

    Pitta-Pantazi, Demetra; Christou, Constantinos

    2011-01-01

    Lamon ("Teaching fractions and ratios for understanding. Essential content knowledge and instructional strategies for teachers," 2nd edn. Lawrence Erlbaum Associates, Mahwah, 2005) claimed that the development of proportional reasoning relies on various kinds of understanding and thinking processes. The critical components suggested were…

  3. Are Explicit Apologies Proportional to the Offenses They Address?

    ERIC Educational Resources Information Center

    Heritage, John; Raymond, Chase Wesley

    2016-01-01

    We consider here Goffman's proposal of proportionality between virtual offenses and remedial actions, based on the examination of 102 cases of explicit apologies. To this end, we offer a typology of the primary apology formats within the dataset, together with a broad categorization of the types of virtual offenses to which these apologies are…

  4. Modelling boron-lined proportional counter response to neutrons.

    PubMed

    Shahri, A; Ghal-Eh, N; Etaati, G R

    2013-09-01

    The detailed Monte Carlo simulation of a boron-lined proportional counter response to a neutron source has been presented. The MCNP4C and experimental data on different source-moderator geometries have been given for comparison. The influence of different irradiation geometries and boron-lining thicknesses on the detector response has been studied.

  5. Proportionality: A Unifying Theme for the Middle Grades.

    ERIC Educational Resources Information Center

    Lanius, Cynthia S.; Williams, Susan E.

    2003-01-01

    Explains how middle school mathematics topics are often taught as separate, discrete topics without a unifying thread. Discusses the importance of proportionality as a concept with the potential to untie, relate, and clarify many important, complex middle grades ideas into a cohesive theme. (YDS)

  6. Making Sense of Fractions, Ratios, and Proportions. 2002 Yearbook.

    ERIC Educational Resources Information Center

    Litwiller, Bonnie, Ed.; Bright, George, Ed.

    This yearbook contains articles that give insight into students' thinking about factions, ratios, and proportions. Suggestions are offered on how to develop the concepts and skills associated with these topics. The book is divided into elementary, middle school, and professional development sections. Chapters include: (1) "The Development of…

  7. High condylectomy versus proportional condylectomy: is secondary orthognathic surgery necessary?

    PubMed

    Fariña, R; Olate, S; Raposo, A; Araya, I; Alister, J P; Uribe, F

    2016-01-01

    The objective of this study was to assess the need for secondary orthognathic surgery in patients undergoing two different condylectomy protocols for active unilateral condylar hyperplasia (UCH). A retrospective cohort study evaluated UCH patients treated by condylectomy. Two groups were established: group 1 comprised those who had undergone a high condylectomy (5 mm removed) and group 2 comprised those who had undergone a proportional condylectomy (removing the difference observed between the measurements of the hyperplastic and the healthy side). Data analysis was done with the Levene test and t-test; a P-value of <0.05 indicated a statistically significant relationship. Forty-nine patients, with an average age of 19.83 years, were analyzed; 11 were included in group 1 and 38 in group 2. There was no statistical difference between the two groups with regard to age or sex (P=0.781). An average of 5.81 mm was removed in the high condylectomy group, while an average of 9.28 mm was removed in the proportional condylectomy group; this difference was statistically significant (P=0.042). Comparing the two groups, proportional condylectomy reduced the need for secondary orthognathic surgery (P<0.001). The proportional condylectomy can be used as the sole surgical treatment in cases of UCH, thus avoiding the need for secondary orthognathic surgery.

  8. System proportions fluid-flow in response to demand signals

    NASA Technical Reports Server (NTRS)

    1966-01-01

    Control system provides proportioned fluid flow rates in response to demand signals. It compares a digital signal, representing a flow demand, with a reference signal to yield a control voltage to one or more solenoid valves connected to orifices of a predetermined size.

  9. Recommended tests and confidence intervals for paired binomial proportions.

    PubMed

    Fagerland, Morten W; Lydersen, Stian; Laake, Petter

    2014-07-20

    We describe, evaluate, and recommend statistical methods for the analysis of paired binomial proportions. A total of 24 methods are considered. The best tests for association include the asymptotic McNemar test and the McNemar mid- p test. For the difference between proportions, we recommend two simple confidence intervals with closed-form expressions and the asymptotic score interval. The asymptotic score interval is also recommended for the ratio of proportions, as is an interval with closed-form expression based on combining two Wilson score intervals for the single proportion. For the odds ratio, we recommend a transformation of the Wilson score interval and a transformation of the Clopper-Pearson mid- p interval. We illustrate the practical application of the methods using data from a recently published study of airway reactivity in children before and after stem cell transplantation and a matched case-control study of the association between floppy eyelid syndrome and obstructive sleep apnea-hypopnea syndrome.

  10. SINGLE ANODE TRIPLE GEM TISSUE EQUIVALENT PROPORTIONAL COUNTER AS THE BASIS FOR A PERSONAL NEUTRON DOSIMETER.

    PubMed

    Seydaliev, M; Dubeau, J; Ali, F

    2016-08-29

    This paper reports on a tissue-equivalent proportional counter (TEPC) based on a triple gas electron multiplier structure, with a single pad readout, as a basis for a personal neutron dosimeter. Its dosimetric response was studied using the (252)Cf neutron source at the Health Physics Generator Facility of the Canadian Nuclear Laboratories. Measured lineal energy spectra were found to be in agreement with numerical simulations performed with Monte Carlo N-Particle eXtended (MCNPX). Both simulations and measurements showed that the mean pathlength of secondary charged particles in the TEPC gas was best represented by the thickness of the drift region of the device. It was determined that the Cauchy Theorem, used to calculate the mean chord length in spherical and cylindrical TEPCs, overestimated the simulated mean chord length by nearly a factor of two. Important operational characteristics of the device were investigated, including gas gain, sensitivity and dosimetric response, as functions of tissue-equivalent gas pressure. This work demonstrates that the proposed design can serve as the basis for a personal neutron dosimeter device, which would satisfy the angular dosimetric response criteria of the personal dosimeter standard IEC61526.

  11. Measurements of the performance of multiwire proportional chambers

    NASA Technical Reports Server (NTRS)

    Austin, R. W.; Eglitis, A.; Gregory, J. C.; Metzger, S. A.; Parnell, T. A.; Rutledge, H. F.; Selig, W.; Cumings, N. P.

    1973-01-01

    Data are presented that may be useful in formulating engineering specifications and test procedures for the proportional counter hodoscope to be flown as part of the High Energy Cosmic Ray Experiment on the High Energy Astronomy Observatory (HEAO), Mission A. A collection of preliminary data taken in laboratory tests of multiwire counters with an anode wire spacing of 5 mm and cathode gap spacing of 1 cm is presented. The data are from laboratory development models or counters for balloon flights and were selected to illustrate several aspects of proper and improper counter performance. Most of the data were taken from a large proportional counter hodoscope which has an active area of 0.5 by 0.5 m and 104 wires per plane.

  12. Robotic Lower Limb Exoskeletons Using Proportional Myoelectric Control

    PubMed Central

    Ferris, Daniel P.; Lewis, Cara L.

    2010-01-01

    Robotic lower limb exoskeletons have been built for augmenting human performance, assisting with disabilities, studying human physiology, and re-training motor deficiencies. At the University of Michigan Human Neuromechanics Laboratory, we have built pneumatically-powered lower limb exoskeletons for the last two purposes. Most of our prior research has focused on ankle joint exoskeletons because of the large contribution from plantar flexors to the mechanical work performed during gait. One way we control the exoskeletons is with proportional myoelectric control, effectively increasing the strength of the wearer with a physiological mode of control. Healthy human subjects quickly adapt to walking with the robotic ankle exoskeletons, reducing their overall energy expenditure. Individuals with incomplete spinal cord injury have demonstrated rapid modification of muscle recruitment patterns with practice walking with the ankle exoskeletons. Evidence suggests that proportional myoelectric control may have distinct advantages over other types of control for robotic exoskeletons in basic science and rehabilitation. PMID:19964579

  13. Transmission Line Properties of Nickel-Bodied Proportional Counters

    NASA Astrophysics Data System (ADS)

    Ryu, Jennifer

    2008-10-01

    Simultaneous measurements of neutral current and charged current neutrino scattering events allowed the Sudbury Neutrino Observatory (SNO) to demonstrate definitively neutrino oscillation. The three phases of the SNO detector are distinguished by different techniques of detecting the neutrons produced by neutral current neutrino scattering. In the final phase, nickel-bodied proportional counters filled with ^3He were used as neutral current detectors (NCDs) by observing the charged particles produced by neutron capture on ^3He. If we can understand the electrical transmission properties of the NCDs, we can use the different pulse shapes produced by neutron captures compared to those of alphas to distinguish these events and gain more sensitivity to the neutral current events. We found that because of the ferromagnetism of the nickel, standard calculations provided for proportional counters are not accurate enough. To obtain a better calculation, we directly measured the electrical properties of the transmission line as a function of frequency. This is a presentation of our results.

  14. Workability of Mass Concrete. Report 2. Supplemental Proportioning Parameters.

    DTIC Science & Technology

    1996-09-01

    proportions for mass concrete with assurance that the concrete will have adequate workability. The initial phase of this study was to obtain information...Corps of Engineers (HQUSACE), as a part of Civil Works Investigation Studies Work Unit 32768, "Workability of Mass Concrete ." The study was conducted...Paul F. Mlakar, Chief, Concrete and Materials Division (CMD), and Mr. Edward F. O’Neil, Acting Chief, Engineering Mechanics Branch (EMB), CMD. Dr

  15. A complete database for the Einstein imaging proportional counter

    NASA Technical Reports Server (NTRS)

    Helfand, David J.

    1991-01-01

    A complete database for the Einstein Imaging Proportional Counter (IPC) was completed. The original data that makes up the archive is described as well as the structure of the database, the Op-Ed analysis system, the technical advances achieved relative to the analysis of (IPC) data, the data products produced, and some uses to which the database has been put by scientists outside Columbia University over the past year.

  16. Automatic method to manufacture 2D Multiwire Proportional Counter frames

    NASA Astrophysics Data System (ADS)

    Martínez, J. C.; Ramos-Lerate, I.; Fernández, F.; Beltrán, D.; Bordas, J.

    2007-04-01

    In this paper, a complete solution to manufacture anodes and cathodes for a Multiwire Proportional Counter (MWPC) is described. The solution consists of a semiautomatic winding machine and a soldering method by radiation. This method allows manufacturing one frame (electrode) in 3 h with a minimum human intervention. The machine can work with several types of frames and a great accuracy in the position and the stress of the wires can be achieved.

  17. Proportional drift tubes for large area muon detectors

    NASA Technical Reports Server (NTRS)

    Cho, C.; Higashi, S.; Hiraoka, N.; Maruyama, A.; Okusawa, T.; Sato, T.; Suwada, T.; Takahashi, T.; Umeda, H.

    1985-01-01

    A proportional drift chamber which consists of eight rectangular drift tubes with cross section of 10 cm x 5 cm, a sense wire of 100 micron phi gold-plated tungsten wire and the length of 6 m, was tested using cosmic ray muons. Spatial resolution (rms) is between 0.5 and 1 mm over drift space of 50 mm, depending on incident angle and distance from sense wire.

  18. THE ESSENTIAL DIFFERENCE BETWEEN THE TWO OPTIMUM PROPORTIONS FLOCCULATION RATIOS

    PubMed Central

    Boyd, William C.; Purnell, Marjorie A.

    1944-01-01

    The fact that the optimum proportion flocculation ratio is different when determined by the α (Dean and Webb) and β (Ramon) procedures is pointed out. It is demonstrated that this difference is a consequence of the difference in the two methods, and that the two optima, though they may in certain cases lie near together, can never coincide. A new ratio (the ε ratio), intermediate between the α and β ratios, and having theoretical advantages over both of them, is defined. PMID:19871416

  19. Equivalence Between Approximate Dynamic Inversion and Proportional-Integral Control

    DTIC Science & Technology

    2008-09-29

    systems that renders the closed-loop error dynamics independent of the reference model dynamics. The equivalent PI controller will be derived and both of...integral control, PI control . I. INTRODUCTION DYNAMIC inversion (DI) or feedback linearization isa popular control design method that is well suited for...Proportional-Integral (PI) model reference controller realiza- tion. The key characteristic of the equivalent PI controller is that it is largely independent

  20. Energy Proportionality and Performance in Data Parallel Computing Clusters

    SciTech Connect

    Kim, Jinoh; Chou, Jerry; Rotem, Doron

    2011-02-14

    Energy consumption in datacenters has recently become a major concern due to the rising operational costs andscalability issues. Recent solutions to this problem propose the principle of energy proportionality, i.e., the amount of energy consumedby the server nodes must be proportional to the amount of work performed. For data parallelism and fault tolerancepurposes, most common file systems used in MapReduce-type clusters maintain a set of replicas for each data block. A coveringset is a group of nodes that together contain at least one replica of the data blocks needed for performing computing tasks. In thiswork, we develop and analyze algorithms to maintain energy proportionality by discovering a covering set that minimizesenergy consumption while placing the remaining nodes in lowpower standby mode. Our algorithms can also discover coveringsets in heterogeneous computing environments. In order to allow more data parallelism, we generalize our algorithms so that itcan discover k-covering sets, i.e., a set of nodes that contain at least k replicas of the data blocks. Our experimental results showthat we can achieve substantial energy saving without significant performance loss in diverse cluster configurations and workingenvironments.

  1. The proportions of mutagens among chemicals in commerce.

    PubMed

    Zeiger, E; Margolin, B H

    2000-10-01

    It has been estimated that there are approximately 80,000 chemicals in commerce. Thus, it is not possible to test all these substances for mutagenicity and carcinogenicity; it is possible, however, to test or make estimates from selected subsets of these chemicals. For example, in the U.S. National Toxicology Program (NTP), 35% of the chemicals tested for mutagenicity in Salmonella were positive, as were 52% of the chemicals tested for carcinogenicity in rodents. In contrast, in the U.S. EPA Gene-Tox database, the proportions of chemicals that are Salmonella mutagens is 56%. These and other databases may be biased toward positive responses because they generally have been developed to look at specific structural or use classes of chemicals or chemicals suspected of genetic or carcinogenic activity. To address the question of the proportions of mutagens among all chemicals in commerce, a database of 100 chemicals was created from a random selection of chemicals in commerce. These chemicals were tested for mutagenicity in Salmonella and 22% were mutagenic. The mutagenicity of the 46 highest U.S. production organic chemicals was also compiled; 20% were mutagenic. These values provide a more accurate estimate of the proportions of mutagens among chemicals in commerce than can be derived from published mutagenicity databases.

  2. Pharmacokinetics and dose proportionality of ceftibuten in men.

    PubMed Central

    Lin, C; Lim, J; Radwanski, E; Marco, A; Affrime, M

    1995-01-01

    The pharmacokinetics and dose proportionality of ceftibuten were evaluated in healthy male volunteers receiving single oral doses of 200, 400, and 800 mg of ceftibuten. The drug was absorbed with similar times to the maximum concentration of drug in plasma for all three doses. Concentrations of ceftibuten in plasma increased with increasing dose. Analysis of variance was carried out on the dose-adjusted values for the maximum concentration of drug in plasma and the area under the plasma concentration-time curve; the results indicated that the concentrations in plasma after the 200- and 400-mg doses were dose proportional, and after the 800-mg of dose they were less than dose proportional. The elimination half-life from plasma ranged from 2.0 to 2.3 h and was independent of dose. The total excretion of unchanged ceftibuten in urine accounted for 53 to 68% of the dose, and the renal clearance was estimated to be 53 to 61 ml/min after all doses. The amount of ceftibuten-trans, the major in vitro and in vivo conversion product of ceftibuten, was low in both plasma and urine. PMID:7726498

  3. NASA CONNECT: Proportionality: The X-Plane Generation

    NASA Technical Reports Server (NTRS)

    2000-01-01

    'Proportionality: The X-Plane Generation' is the fifth of seven programs in the 1999-2000 NASA CONNECT series. Produced by NASA Langley Research Center's Office of Education, NASA CONNECT is an award-winning series of instructional programs designed to enhance the teaching of math, science and technology concepts in grades 5-8. NASA CONNECT establishes the 'connection' between the mathematics, science, and technology concepts taught in the classroom and NASA research. Each program in the series supports the national mathematics, science, and technology standards; includes a resource-rich teacher guide; and uses a classroom experiment and web-based activity to complement and enhance the math, science, and technology concepts presented in the program. NASA CONNECT is FREE and the programs in the series are in the public domain. Visit our web site and register. http://connect.larc.nasa.gov In 'Proportionality: The X-Plane Generation', students will learn why scaling and proportion are important factors in spacecraft design.

  4. Maximum-likelihood estimation of admixture proportions from genetic data.

    PubMed Central

    Wang, Jinliang

    2003-01-01

    For an admixed population, an important question is how much genetic contribution comes from each parental population. Several methods have been developed to estimate such admixture proportions, using data on genetic markers sampled from parental and admixed populations. In this study, I propose a likelihood method to estimate jointly the admixture proportions, the genetic drift that occurred to the admixed population and each parental population during the period between the hybridization and sampling events, and the genetic drift in each ancestral population within the interval between their split and hybridization. The results from extensive simulations using various combinations of relevant parameter values show that in general much more accurate and precise estimates of admixture proportions are obtained from the likelihood method than from previous methods. The likelihood method also yields reasonable estimates of genetic drift that occurred to each population, which translate into relative effective sizes (N(e)) or absolute average N(e)'s if the times when the relevant events (such as population split, admixture, and sampling) occurred are known. The proposed likelihood method also has features such as relatively low computational requirement compared with previous ones, flexibility for admixture models, and marker types. In particular, it allows for missing data from a contributing parental population. The method is applied to a human data set and a wolflike canids data set, and the results obtained are discussed in comparison with those from other estimators and from previous studies. PMID:12807794

  5. A Method to Quantify Mouse Coat-Color Proportions

    PubMed Central

    Ounpraseuth, Songthip; Rafferty, Tonya M.; McDonald-Phillips, Rachel E.; Gammill, Whitney M.; Siegel, Eric R.; Wheeler, Kristin L.; Nilsson, Erik A.; Cooney, Craig A.

    2009-01-01

    Coat-color proportions and patterns in mice are used as assays for many processes such as transgene expression, chimerism, and epigenetics. In many studies, coat-color readouts are estimated from subjective scoring of individual mice. Here we show a method by which mouse coat color is quantified as the proportion of coat shown in one or more digital images. We use the yellow-agouti mouse model of epigenetic variegation to demonstrate this method. We apply this method to live mice using a conventional digital camera for data collection. We use a raster graphics editing program to convert agouti regions of the coat to a standard, uniform, brown color and the yellow regions of the coat to a standard, uniform, yellow color. We use a second program to quantify the proportions of these standard colors. This method provides quantification that relates directly to the visual appearance of the live animal. It also provides an objective analysis with a traceable record, and it should allow for precise comparisons of mouse coats and mouse cohorts within and between studies. PMID:19404391

  6. LDPC Codes with Minimum Distance Proportional to Block Size

    NASA Technical Reports Server (NTRS)

    Divsalar, Dariush; Jones, Christopher; Dolinar, Samuel; Thorpe, Jeremy

    2009-01-01

    Low-density parity-check (LDPC) codes characterized by minimum Hamming distances proportional to block sizes have been demonstrated. Like the codes mentioned in the immediately preceding article, the present codes are error-correcting codes suitable for use in a variety of wireless data-communication systems that include noisy channels. The previously mentioned codes have low decoding thresholds and reasonably low error floors. However, the minimum Hamming distances of those codes do not grow linearly with code-block sizes. Codes that have this minimum-distance property exhibit very low error floors. Examples of such codes include regular LDPC codes with variable degrees of at least 3. Unfortunately, the decoding thresholds of regular LDPC codes are high. Hence, there is a need for LDPC codes characterized by both low decoding thresholds and, in order to obtain acceptably low error floors, minimum Hamming distances that are proportional to code-block sizes. The present codes were developed to satisfy this need. The minimum Hamming distances of the present codes have been shown, through consideration of ensemble-average weight enumerators, to be proportional to code block sizes. As in the cases of irregular ensembles, the properties of these codes are sensitive to the proportion of degree-2 variable nodes. A code having too few such nodes tends to have an iterative decoding threshold that is far from the capacity threshold. A code having too many such nodes tends not to exhibit a minimum distance that is proportional to block size. Results of computational simulations have shown that the decoding thresholds of codes of the present type are lower than those of regular LDPC codes. Included in the simulations were a few examples from a family of codes characterized by rates ranging from low to high and by thresholds that adhere closely to their respective channel capacity thresholds; the simulation results from these examples showed that the codes in question have low

  7. Basic design of a multi wire proportional counter using Garfield++ for ILSF

    NASA Astrophysics Data System (ADS)

    Ghahremani Gol, M.; Ashrafi, S.; Rahighi, J.

    2016-12-01

    The Iranian Light Source Facility (ILSF) is a new 3 GeV third generation synchrotron radiation facility in Middle East, which at the time being is in its design stage. An important aspect for the scientific success of this new source will be the availability of well adapted detectors. Position-sensitive X-ray detectors have played an important role in synchrotron radiation X-ray experiments for many years and are still in use. An operational one-dimensional multiwire position sensitive detector with delay line readout produced by ILSF showed a position resolution of 230 μm. In this paper, we introduce a 2-D position sensitive gas detector based on a multiwire proportional chamber which will be used in small/wide angle scattering and diffraction experiments with synchrotron radiation at the ILSF. The parameters of its components, including the gas filling, gas pressure, temperature, the geometry of anode and cathodes planes as well as the expected performance of the designed system will be described in the following. For the design and the simulation of MWPC the Elmer and Garfield++ codes have been employed. We have built and tested a MWPC as a prototype at ILSF. The results obtained so far show a good position sensing. After primary test the detector has been optimized and is now ready for test at Elettra.

  8. Calibration of an Ultra-Low-Background Proportional Counter for Measuring 37Ar

    SciTech Connect

    Seifert, Allen; Aalseth, Craig E.; Bonicalzi, Ricco; Bowyer, Ted W.; Day, Anthony R.; Fuller, Erin S.; Haas, Derek A.; Hayes, James C.; Hoppe, Eric W.; Humble, Paul H.; Keillor, Martin E.; LaFerriere, Brian D.; Mace, Emily K.; McIntyre, Justin I.; Merriman, Jason H.; Miley, Harry S.; Myers, Allan W.; Orrell, John L.; Overman, Cory T.; Panisko, Mark E.; Williams, Richard M.

    2013-08-08

    Abstract. An ultra-low-background proportional counter (ULBPC) design has been developed at Pacific Northwest National Laboratory (PNNL) using clean materials, primarily electrochemically-purified copper. This detector, along with an ultra-low-background counting system (ULBCS), was developed to complement a new shallow underground laboratory (30 meters water-equivalent) constructed at PNNL. The ULBCS design includes passive neutron and gamma shielding, along with an active cosmic-veto system. This system provides a capability for making ultra-sensitive measurements to support applications like age-dating soil hydrocarbons with 14C/3H, age-dating of groundwater with 39Ar, and soil-gas assay for 37Ar to support On-Site Inspection (OSI). On-Site Inspection is a key component of the verification regime for the Comprehensive Nuclear-Test-Ban Treaty (CTBT). Measurements of radionuclides created by an underground nuclear explosion are valuable signatures of a Treaty violation. For OSI, the 35-day half-life of 37Ar, produced from neutron interactions with calcium in soil, provides both high specific activity and sufficient time for inspection before decay limits sensitivity. This work describes the calibration techniques and analysis methods developed to enable quantitative measurements of 37Ar samples over a broad range of pressures. These efforts, along with parallel work in progress on gas chemistry separation, are expected to provide a significant new capability for 37Ar soil gas background studies.

  9. TMAE vapour of CsI layers as photocathodes in a multiwire proportional counter working at atmospheric pressure

    NASA Astrophysics Data System (ADS)

    Guerard, B.; Bruyndonckx, P.; Tavernier, S.; Shuping, Zhang

    1991-12-01

    A multiwire proportional counter (MWPC) coupled to a BaF 2 crystal has been tested at atmospheric pressure for the detection of 511 keV photons. If TMAE is used as a photosensitive agent, we found that addition of H 2O vapour to the chamber gas is very well suited for the detection of single-photoelectrons. Encouraging first results were also obtained with caesium iodide photocathodes.

  10. High proportion of male faeces in jaguar populations.

    PubMed

    Palomares, Francisco; Roques, Séverine; Chávez, Cuauhtémoc; Silveira, Leandro; Keller, Claudia; Sollmann, Rahel; do Prado, Denise Mello; Torres, Patricia Carignano; Adrados, Begoña; Godoy, José Antonio; de Almeida Jácomo, Anah Tereza; Tôrres, Natália Mundim; Furtado, Mariana Malzoni; López-Bao, José Vicente

    2012-01-01

    Faeces provide relevant biological information which includes, with the application of genetic techniques, the sex and identity of individuals that defecated, thus providing potentially useful data on the behaviour and ecology of individuals, as well as the dynamics and structure of populations. This paper presents estimates of the sex ratio of different felid species (jaguar, Panthera onca; puma, Puma concolor; and ocelot/margay, Leopardus pardalis/Leopardus wiedi) as observed in field collected faeces, and proposes several hypotheses that could explain the strikingly high proportion of faeces from male jaguars. The proportion of male and female faeces was estimated using a non-invasive faecal sampling method in 14 study areas in Mexico and Brazil. Faecal samples were genetically analysed to identify the species, the sex and the individual (the latter only for samples identified as belonging to jaguars). Considering the three species, 72.6% of faeces (n = 493) were from males; however, there were significant differences among them, with the proportion from males being higher for jaguars than for pumas and ocelots/margays. A male-bias was consistently observed in all study areas for jaguar faeces, but not for the other species. For jaguars the trend was the same when considering the number of individuals identified (n = 68), with an average of 4.2±0.56 faeces per male and 2.0±0.36 per female. The observed faecal marking patterns might be related to the behaviour of female jaguars directed toward protecting litters from males, and in both male and female pumas, to prevent interspecific aggressions from male jaguars. The hypothesis that there are effectively more males than females in jaguar populations cannot be discarded, which could be due to the fact that females are territorial and males are not, or a tendency for males to disperse into suboptimal areas for the species.

  11. High Proportion of Male Faeces in Jaguar Populations

    PubMed Central

    Palomares, Francisco; Roques, Séverine; Chávez, Cuauhtémoc; Silveira, Leandro; Keller, Claudia; Sollmann, Rahel; do Prado, Denise Mello; Torres, Patricia Carignano; Adrados, Begoña; Godoy, José Antonio; de Almeida Jácomo, Anah Tereza; Tôrres, Natália Mundim; Furtado, Mariana Malzoni; López-Bao, José Vicente

    2012-01-01

    Faeces provide relevant biological information which includes, with the application of genetic techniques, the sex and identity of individuals that defecated, thus providing potentially useful data on the behaviour and ecology of individuals, as well as the dynamics and structure of populations. This paper presents estimates of the sex ratio of different felid species (jaguar, Panthera onca; puma, Puma concolor; and ocelot/margay, Leopardus pardalis/Leopardus wiedi) as observed in field collected faeces, and proposes several hypotheses that could explain the strikingly high proportion of faeces from male jaguars. The proportion of male and female faeces was estimated using a non-invasive faecal sampling method in 14 study areas in Mexico and Brazil. Faecal samples were genetically analysed to identify the species, the sex and the individual (the latter only for samples identified as belonging to jaguars). Considering the three species, 72.6% of faeces (n = 493) were from males; however, there were significant differences among them, with the proportion from males being higher for jaguars than for pumas and ocelots/margays. A male-bias was consistently observed in all study areas for jaguar faeces, but not for the other species. For jaguars the trend was the same when considering the number of individuals identified (n = 68), with an average of 4.2±0.56 faeces per male and 2.0±0.36 per female. The observed faecal marking patterns might be related to the behaviour of female jaguars directed toward protecting litters from males, and in both male and female pumas, to prevent interspecific aggressions from male jaguars. The hypothesis that there are effectively more males than females in jaguar populations cannot be discarded, which could be due to the fact that females are territorial and males are not, or a tendency for males to disperse into suboptimal areas for the species. PMID:23285226

  12. Functional hand proportion is approximated by the Fibonacci series.

    PubMed

    Choo, K W-Q; Quah, W-K; Chang, G-H; Chan, J Y

    2012-08-01

    The debatable relationship of functional human hand proportion with the Fibonacci series has remained an obscure scientific enigma short of clinical interest. The main difficulty of proving such a relationship lies in defining what should constitute true functional proportion. In this study, we re-evaluate this unique relationship using hand flexion creases as anatomical surrogates for the functional axes of joint rotation. Standardised desktop photocopies of palmar views of both hands in full digital extension and abduction were obtained from 100 healthy male volunteers of Chinese ethnicity. The functional axes were represented by the distal digital crease (distal interphalangeal joint, DIPJ), proximal digital crease (proximal interphalangeal joint, PIPJ), as well as the midpoint between the palmar digital and transverse palmar creases (metacarpophalangeal joint, MCPJ). The ratio of DIPJ-Fingertip:PIPJ-DIPJ:MCPJ-PIPJ (p3:p2:p1) was measured by two independent observers and represented as standard deviation about the mean, and then compared to the theoretical ratio of 1:1:2. Our results showed that, for the 2nd to 5th digits, the p2:p3 ratios were 0.97 ± ± 0.09, 1.10 ± 0.10, 1.04 ± 0.12, and 0.80 ± 0.08, respectively; whilst the p1:p2 ratios were 1.91 ± 0.17, 1.98 ± 0.14, 1.89 ± 0.16, and 2.09 ± 0.24, respectively. When the data were analysed for all digits, they showed a combined p3:p2:p1 ratio of 1:0.98:2.01. In conclusion, our results suggest that functional human hand proportion, as defined by flexion creases, is approximated by the Fibonacci series.

  13. The elite athlete - assessing body shape, size, proportion and composition.

    PubMed

    Kerr, D A; Ackland, T R; Schreiner, A B

    1995-03-01

    In the quest to optimize performance of the elite athlete the sport scientist has sought to determine the ideal physique for a given sport or event. For some sports, specific structural characteristics offer definite performance advantages; for example in rowing, in addition to height, a large arm span has been identified as important. In other sports. such as long distance running, low levels of adiposity or 'fatness' appear to be linked with faster running times. There are four areas where appraisal of the athlete's physique can provide useful information: (1) identification of talented athletes; (2) to assess and monitor the growing athlete; (3) to monitor training and performance; and (4) to determine 'race weight' in weight-category sports. As a research tool a particular method must be reliable and valid. Other considerations include how expensive the method is, if it is suitable for a field situation and if large amounts of data on a number of subjects can be collected quickly. The method should be safe for both the athlete and the tester and provide useful feedback for the athlete or coach. Anthropometry, with training is able to fulfil most of these criteria and is the most widely used method of physique assessment in sports science. Large anthropometric data bases have been collected on elite athletes at Olympic games and world championships according to a standard protocol. Kinanthropometry, which has developed from anthropometry, is concerned with measurement and evaluation of different aspects of human movement and individual variation in body shape, size, proportion and composition. For the assessment of adiposity a sum of skinfolds, usually over six sites, is most commonly used rather than percentage body fat formulae. Muscle mass can be assessed indirectly through girth and corrected girth measurements. Limb lengths and breadths are used to assess skeletal structure and proportional differences in limb size. The anthropometric methods most commonly

  14. [sup 3]He neutron detector performance in mixed neutron gamma environments

    SciTech Connect

    Johnson, N. H.; Beddingfield, D. H.

    2002-01-01

    A test program of the performance of 3He neutron proportional detectors with varying gas pressures, and their response to lligh level gamma-ray exposure in a mixed neutrodgamma environment, ha$ been performed Our intent was to identie the optimal gas pressure to reduce the gamma-ray sensitivity of these detectors. These detectors were manufxtured using materials to minimize their gamma response. Earlier work focused on 3He fill pressures of four atmospheres and above, whereas the present work focuses on a wider range of pressures. Tests have shown that reducing the .filling pressure will M e r increase the gamma-ray dose range in which the detectors can be operated.

  15. Coated Fiber Neutron Detector Test

    SciTech Connect

    Lintereur, Azaree T.; Ely, James H.; Kouzes, Richard T.; Stromswold, David C.

    2009-10-23

    Radiation portal monitors used for interdiction of illicit materials at borders include highly sensitive neutron detection systems. The main reason for having neutron detection capability is to detect fission neutrons from plutonium. The currently deployed radiation portal monitors (RPMs) from Ludlum and Science Applications International Corporation (SAIC) use neutron detectors based upon 3He-filled gas proportional counters, which are the most common large neutron detector. There is a declining supply of 3He in the world, and thus, methods to reduce the use of this gas in RPMs with minimal changes to the current system designs and sensitivity to cargo-borne neutrons are being investigated. Reported here are the results of tests of the 6Li/ZnS(Ag)-coated non-scintillating plastic fibers option. This testing measured the required performance for neutron detection efficiency and gamma ray rejection capabilities of a system manufactured by Innovative American Technology (IAT).

  16. Asbestos disease in sheet metal workers: proportional mortality update

    SciTech Connect

    Michaels, D.; Zoloth, S.

    1988-01-01

    This paper, updating the findings of an earlier study, provides additional evidence that sheet metal workers in the construction trades are at increased risk for asbestos-related disease. A proportional analysis of cause of death among 331 New York sheet metal workers found a significantly elevated PMR for lung cancer (PMR = 186). In addition, there were six deaths attributable to mesothelioma (three classified as lung cancer deaths) and three death certificates mentioned asbestosis or pulmonary fibrosis, although none of these three deaths were attributed to these diseases.

  17. Proportion of recovered goose and brant bands that are reported

    USGS Publications Warehouse

    Martinson, R.K.; McCann, J.A.

    1966-01-01

    A few more than one-third of the goose and brant bands recovered by hunters were reported to the Bird Banding Laboratory (a rate of 0.361) during the 1962-64 hunting seasons. We calculated this band-reporting rate by comparing the estimated number of goose and brant bands recovered by hunters, based on a mail questionnaire survey, with the number of bands actually reported to the Bird Banding Laboratory. This band-reporting rate is probably representative only of the 1962-65 period. It is likely that, in earlier years, a greater proportion (perhaps about 0.60) of recovered goose and brant bands were reported.

  18. Wealth distribution under Yard-Sale exchange with proportional taxes

    NASA Astrophysics Data System (ADS)

    Bustos-Guajardo, R.; Moukarzel, Cristian F.

    2016-03-01

    Recent analysis of a Yard-Sale (YS) exchange model supplemented with redistributive proportional taxation suggested an asymptotic behavior P(w)˜1/wμ for the wealth distribution, with a parameter-dependent exponent μ. Revisiting this problem, it is here shown analytically, and confirmed by extensive numerical simulation, that the asymptotic behavior of P(w) is not power-law but rather a Gaussian. When taxation is weak, we furthermore show that a restricted-range power-law behavior appears for wealths around the mean value. The corresponding power-law exponent equals 3/2 when the return distribution has zero mean.

  19. New Bi-Proportional Methods for Bulgarian Parliamentary Elections

    NASA Astrophysics Data System (ADS)

    Konstantinov, Mihail; Yanev, Kostadin; Pelova, Galina

    2010-10-01

    A disadvantage of the existing bi-proportional system for the Bulgarian parliamentary elections is the large number of discordances (a party list with less votes gets more seats than a party list with more votes) in the seat distributions. Different schemes has been proposed to deal with this phenomenon. In this paper we propose two new methods: 1) augmentation of the electoral regions and 2) introduction of a new electoral region for accounting the votes cast abroad. In this way the number of discordances may be vastly reduced.

  20. The enigma of facial beauty: esthetics, proportions, deformity, and controversy.

    PubMed

    Naini, Farhad B; Moss, James P; Gill, Daljit S

    2006-09-01

    The study of the face and the ability to alter its form have fascinated mankind for thousands of years. The clinical ability to alter dentofacial form, whether through orthodontics, facial growth modification, or surgery, requires an understanding of facial beauty, including the evaluation of facial esthetics, proportions, and symmetry. The purposes of this article were to give a brief contemporary overview of our concepts of facial beauty and esthetics and to consider a long-standing and controversial debate on the treatment of patients with dentofacial deformities.

  1. Gas and Gas Pains

    MedlinePlus

    ... your gas and bloating occur mainly after eating dairy products, it may be because your body isn' ... able to break down the sugar (lactose) in dairy foods. Other food intolerances, especially to gluten — a ...

  2. The proportion of elderly in Pennsylvania is slipping but....

    PubMed

    Waldman, H Barry; Cannella, Dolores; Perlman, Steven P

    2013-01-01

    Media reports describing the anticipated increase of tens of millions of elderly residents and their attendant billions of dollar costs for health services during the next decades are difficult for any person to place in proper perspective. As a result, these estimates become "just numbers" not actual people. Census Bureau reports are used at the national, state and county levels to provide an increased meaningful picture when the 65 and older population of Pennsylvania will increase to 22.6 percent of the state population. In 2000, 12.4 percent of the U.S. population was 65 years and older (15.6 percent in Pennsylvania, 1.9 million elderly). Only in the state of Florida was the proportion greater. In 2010, the proportion of elderly in the population of Pennsylvania ranked 4th (behind Florida, West Virginia and Maine). It was tied for 3rd (behind Florida and North Dakota) with 2.5 percent of the population 85 years and over. By 2030, the projected number of elderly in Pennsylvania (22.6 percent of the state population) will rank 11th. But ... "Starting on Jan 1, (2011) our 79-million-strong baby boomer generation will be turning 65 at the rate of one elderly every eight seconds.

  3. Fiber Contraction Approaches for Improving CMC Proportional Limit

    NASA Technical Reports Server (NTRS)

    DiCarlo, James A.; Yun, Hee Mann

    1997-01-01

    The fact that the service life of ceramic matrix composites (CMC) decreases dramatically for stresses above the CMC proportional limit has triggered a variety of research activities to develop microstructural approaches that can significantly improve this limit. As discussed in a previous report, both local and global approaches exist for hindering the propagation of cracks through the CMC matrix, the physical source for the proportional limit. Local approaches include: (1) minimizing fiber diameter and matrix modulus; (2) maximizing fiber volume fraction, fiber modulus, and matrix toughness; and (3) optimizing fiber-matrix interfacial shear strength; all of which should reduce the stress concentration at the tip of cracks pre existing or created in the matrix during CMC service. Global approaches, as with pre-stressed concrete, center on seeking mechanisms for utilizing the reinforcing fiber to subject the matrix to in-situ compressive stresses which will remain stable during CMC service. Demonstrated CMC examples for the viability of this residual stress approach are based on strain mismatches between the fiber and matrix in their free states, such as, thermal expansion mismatch and creep mismatch. However, these particular mismatch approaches are application limited in that the residual stresses from expansion mismatch are optimum only at low CMC service temperatures and the residual stresses from creep mismatch are typically unidirectional and difficult to implement in complex-shaped CMC.

  4. The arcsine is asinine: the analysis of proportions in ecology.

    PubMed

    Warton, David I; Hui, Francis K C

    2011-01-01

    The arcsine square root transformation has long been standard procedure when analyzing proportional data in ecology, with applications in data sets containing binomial and non-binomial response variables. Here, we argue that the arcsine transform should not be used in either circumstance. For binomial data, logistic regression has greater interpretability and higher power than analyses of transformed data. However, it is important to check the data for additional unexplained variation, i.e., overdispersion, and to account for it via the inclusion of random effects in the model if found. For non-binomial data, the arcsine transform is undesirable on the grounds of interpretability, and because it can produce nonsensical predictions. The logit transformation is proposed as an alternative approach to address these issues. Examples are presented in both cases to illustrate these advantages, comparing various methods of analyzing proportions including untransformed, arcsine- and logit-transformed linear models and logistic regression (with or without random effects). Simulations demonstrate that logistic regression usually provides a gain in power over other methods.

  5. Human patellar articular proportions: recent and Pleistocene patterns

    PubMed Central

    TRINKAUS, ERIK

    2000-01-01

    The degrees of mediolateral asymmetry of the patellar articular facet, as well as the median and lateral articular angles of the facet, were compared across samples of recent humans and of Pleistocene archaic and modern fossil humans. All samples exhibit considerable variability in these patellar proportions. The articular angles are similar across the different samples, but there is a trend towards decreasing lateral angles with decreasing robusticity. The archaic humans exhibit significantly more symmetry of the medial and lateral facets than do any of the recent human samples. However, given the variability in medial versus lateral patellofemoral contact forces documented for extant humans and the roles of the distal oblique portions of vastus medialis and vastus lateralis in patellar stabilisation, it is unclear to what extent this variation in patellar articular proportions may affect knee kinesiology. The contrasts may be related to different levels of patellar stability and/or musculoskeletal hypertrophy, but they appear unlikely to have affected primary knee function. PMID:10853969

  6. Adaptive differences in the body proportions of large felids.

    PubMed

    Gonyea, W J

    1976-01-01

    Body proportions of eight species of large felids were studied and the relationship between their morphology, habitat structure and habitat utilization was analyzed. Both Panthera onca and Neofelis nebulosa are exclusive forest dwellers (found exclusively in high densly structured habitats). These felids have the relatively shortest anterior limbs and lumbar spine. In addition, P. onca has the relatively shortest posterior limbs of the large felids, while the posterior limbs of N. nebulosa are relatively long when compared with those of P. onca which seems to be an adaptation for jumping. All large fields use the anterior limbs to make primary contact with their prey. In addition, the prey taken by the forest fields can exceed their own body weight. On the other hand, the cheetah is found in low structured habitats (savanna), and it has the relatively longest limbs and lumbarspine of the large felids. But the cheetah's prey usually weigh less than its own body weight. The cheetah also employs a 'rapid pursuit phase' in hunting and is capable of overtaking its prey. The lion, however, was found to have the body proportions of a forest felid, yet it also resides in low structured habitats. It is postulated that the utilization of large prey by the lion limits the possibilities for morphological adaptations for speed. To increase hunting efficiency, reproductive success, and territorial defense on the plains, lions form prides.

  7. Empirical Relationships between Species Richness, Evenness, and Proportional Diversity.

    PubMed

    Stirling, G; Wilsey, B

    2001-09-01

    Diversity (or biodiversity) is typically measured by a species count (richness) and sometimes with an evenness index; it may also be measured by a proportional statistic that combines both measures (e.g., Shannon-Weiner index or H'). These diversity measures are hypothesized to be positively and strongly correlated, but this null hypothesis has not been tested empirically. We used the results of Caswell's neutral model to generate null relationships between richness (S), evenness (J'), and proportional diversity (H'). We tested predictions of the null model against empirical relationships describing data in a literature survey and in four individual studies conducted across various scales. Empirical relationships between log S or J' and H' differed from the null model when <10 species were tested and in plants, vertebrates, and fungi. The empirical relationships were similar to the null model when >10 and <100 species were tested and in invertebrates. If >100 species were used to estimate diversity, the relation between log S and H' was negative. The strongest predictive models included log S and J'. A path analysis indicated that log S and J' were always negatively related, that empirical observations could not be explained without including indirect effects, and that differences between the partials may indicate ecological effects, which suggests that S and J' act like diversity components or that diversity should be measured using a compound statistic.

  8. Chemical evolution of cementitious materials with high proportion of fly ash and slag

    SciTech Connect

    Kruger, A.A.; Bakharev, T.; Brough, A.R.; Kirkpatrick, R.J.; Struble, L.J.; Young, J.F.

    1995-12-01

    Cement mixtures containing high proportions of slag and fly ash were tested to assess their suitability to immobilize simulated off-gas waste solutions after vitrification of low-level radioactive tank wastes stored at Hanford. Materials were mixed with carbonated or alkaline solutions and cured initially adiabatically, then at 70{degrees}C. Chemical changes were monitored for 7 months using X-ray diffraction, selective dissolution and SEM; NMR was utilized to follow the polymerization of silicate species. The process of hydration during the first months of curing was characterized by formation of quite crystalline Al-substituted C-S-H structurally related to 1.1 nm tobermorite and traces of zeolites in some materials. A low content of calcium hydroxide was found in all materials after I month of curing. The SEM examination demonstrated rapidly decreasing porosity, making the mixtures favorable for long-term durability.

  9. A new large-area 2pi proportional counting system at NIST.

    PubMed

    King, L E; Hutchinson, J M R; Unterweger, M P

    2008-01-01

    A new large-area gas flow multi-wire proportional counter has been developed to replace the large-area counting system that is currently in use at the National Institute of Standards and Technology (NIST) and several Department of Defense counting facilities for calibrating large-area alpha and beta sources. The current systems are over 20 years old and part replacement is very difficult. The new systems have been built using specifications that will improve on the current systems and allow collecting data at pressures up to 0.2MPa. The ability to operate at higher pressures will increase the beta efficiency of the counter and lead to improved precision in the final measured results. Comparison of the results from the old and new systems is presented for both alpha and beta sources.

  10. High-Sensitivity X-ray Polarimetry with Amorphous Silicon Active-Matrix Pixel Proportional Counters

    NASA Technical Reports Server (NTRS)

    Black, J. K.; Deines-Jones, P.; Jahoda, K.; Ready, S. E.; Street, R. A.

    2003-01-01

    Photoelectric X-ray polarimeters based on pixel micropattern gas detectors (MPGDs) offer order-of-magnitude improvement in sensitivity over more traditional techniques based on X-ray scattering. This new technique places some of the most interesting astronomical observations within reach of even a small, dedicated mission. The most sensitive instrument would be a photoelectric polarimeter at the focus of 2 a very large mirror, such as the planned XEUS. Our efforts are focused on a smaller pathfinder mission, which would achieve its greatest sensitivity with large-area, low-background, collimated polarimeters. We have recently demonstrated a MPGD polarimeter using amorphous silicon thin-film transistor (TFT) readout suitable for the focal plane of an X-ray telescope. All the technologies used in the demonstration polarimeter are scalable to the areas required for a high-sensitivity collimated polarimeter. Leywords: X-ray polarimetry, particle tracking, proportional counter, GEM, pixel readout

  11. The response of tissue-equivalent proportional counters to heavy ions

    NASA Technical Reports Server (NTRS)

    Nikjoo, Hooshang; Khvostunov, Igor K.; Cucinotta, Francis A.

    2002-01-01

    The paper presents a theoretical model for the response of a tissue-equivalent proportional counter (TEPC) irradiated with charged particles. Heavy ions and iron ions in particular constitute a significant part of radiation in space. TEPCs are used for all space shuttle and International Space Station (ISS) missions to estimate the dose and radiation quality (in terms of lineal energy) inside spacecraft. The response of the tissue-equivalent proportional counters shows distortions at the wall/cavity interface. In this paper, we present microdosimetric investigation using Monte Carlo track structure calculations to simulate the response of a TEPC to charged particles of various LET (1 MeV protons, 2.4 MeV alpha particles, 46 MeV/nucleon 20Ne, 55 MeV/nucleon 20Ne, 45 MeV/nucleon 40Ar, and 1.05 GeV/nucleon 56Fe). Data are presented for energy lost and energy absorbed in the counter cavity and wall. The model calculations are in good agreement with the results of Rademacher et al. (Radiat. Res. 149, 387-389, 1998), including the study of the interface between the wall and the sensitive region of the counter. It is shown that the anomalous response observed at large event sizes in the experiment is due to an enhanced entry of secondary electrons from the wall into the gas cavity.

  12. The role of facial proportion in hair restoration surgery.

    PubMed

    Stough, D B; Schell, B J; Weyrich, R P

    1997-02-01

    Facial aesthetics involve basic artistic principles that relate individual features to the face as a whole. These principles, such as balance and proportion, are key elements in the development of hair restoration surgery and can be applied to reconstructive procedures for the trauma or burn patient. This paper describes the application of anthropometric and artistic principles used in hair reconstruction. Attention has been directed to the procedures used to determine hairline contour and placement, and certain aspects of frontotemporal recession management. The frontal hair has a profound effect on facial balance because of the major role hair plays in framing and visually enhancing the face. The presence of frontal hair and facial framing also serves to retain a vital element of autonomy in appearance for the individual.

  13. The effect of abnormal cell proportion on specimen classifier performance

    NASA Technical Reports Server (NTRS)

    Castleman, K. R.; White, B. S.

    1981-01-01

    An analysis is presented of the results obtained from a cell classifier which is confronted with an abnormal/normal cell ratio which is different from the ratio assumed in the calibration of the classifier. False negative and false positive error rates are determined in advance for classifier operation, along with the necessary sample size in order to validate the predicted distributions. Changes are demonstrated to happen only regarding the false negative rate, where reductions in the abnormal cell rate below the expected rates would cause totally unreliable data. Substantial overproduction of abnormal cells would be quickly noticeable, while production rates beyond, but close to, the expected rates would only require more extensive sampling. Classifier systems for 10% proportions of abnormal cells are concluded to be possible, but difficulties are present with much lower rates

  14. Response of a tissue equivalent proportional counter to neutrons

    NASA Technical Reports Server (NTRS)

    Badhwar, G. D.; Robbins, D. E.; Gibbons, F.; Braby, L. A.

    2002-01-01

    The absorbed dose as a function of lineal energy was measured at the CERN-EC Reference-field Facility (CERF) using a 512-channel tissue equivalent proportional counter (TEPC), and neutron dose equivalent response evaluated. Although there are some differences, the measured dose equivalent is in agreement with that measured by the 16-channel HANDI tissue equivalent counter. Comparison of TEPC measurements with those made by a silicon solid-state detector for low linear energy transfer particles produced by the same beam, is presented. The measurements show that about 4% of dose equivalent is delivered by particles heavier than protons generated in the conducting tissue equivalent plastic. c2002 Elsevier Science Ltd. All rights reserved.

  15. Alpha Backgrounds in the SNO ^3He Proportional Counter Array

    NASA Astrophysics Data System (ADS)

    Stonehill, Laura

    2006-04-01

    The Sudbury Neutrino Observatory (SNO) has recently deployed an array of proportional counters known as Neutral Current Detectors (NCDs) to detect thermalized neutrons via the ^3He(n,p)^3H reaction. The primary physics background to the neutron-capture signal is alpha particle emission from uranium- and thorium-chain decays in the NCD walls. The expected capture rate of neutrons from the neutral-current neutrino reaction on deuterium is three per day and the intrinsic alpha background rate is approximately 250 alphas per day. Fewer than 10% of these alphas fall into the energy range where neutron-capture signals occur, and a substantial number of these can be eliminated by pulse-shape analysis. This talk will focus on measurements of the alpha backgrounds in the NCDs and the extent to which these alphas contaminate the neutron-capture signal region.

  16. The evolution of human and ape hand proportions.

    PubMed

    Almécija, Sergio; Smaers, Jeroen B; Jungers, William L

    2015-07-14

    Human hands are distinguished from apes by possessing longer thumbs relative to fingers. However, this simple ape-human dichotomy fails to provide an adequate framework for testing competing hypotheses of human evolution and for reconstructing the morphology of the last common ancestor (LCA) of humans and chimpanzees. We inspect human and ape hand-length proportions using phylogenetically informed morphometric analyses and test alternative models of evolution along the anthropoid tree of life, including fossils like the plesiomorphic ape Proconsul heseloni and the hominins Ardipithecus ramidus and Australopithecus sediba. Our results reveal high levels of hand disparity among modern hominoids, which are explained by different evolutionary processes: autapomorphic evolution in hylobatids (extreme digital and thumb elongation), convergent adaptation between chimpanzees and orangutans (digital elongation) and comparatively little change in gorillas and hominins. The human (and australopith) high thumb-to-digits ratio required little change since the LCA, and was acquired convergently with other highly dexterous anthropoids.

  17. The evolution of human and ape hand proportions

    PubMed Central

    Almécija, Sergio; Smaers, Jeroen B.; Jungers, William L.

    2015-01-01

    Human hands are distinguished from apes by possessing longer thumbs relative to fingers. However, this simple ape-human dichotomy fails to provide an adequate framework for testing competing hypotheses of human evolution and for reconstructing the morphology of the last common ancestor (LCA) of humans and chimpanzees. We inspect human and ape hand-length proportions using phylogenetically informed morphometric analyses and test alternative models of evolution along the anthropoid tree of life, including fossils like the plesiomorphic ape Proconsul heseloni and the hominins Ardipithecus ramidus and Australopithecus sediba. Our results reveal high levels of hand disparity among modern hominoids, which are explained by different evolutionary processes: autapomorphic evolution in hylobatids (extreme digital and thumb elongation), convergent adaptation between chimpanzees and orangutans (digital elongation) and comparatively little change in gorillas and hominins. The human (and australopith) high thumb-to-digits ratio required little change since the LCA, and was acquired convergently with other highly dexterous anthropoids. PMID:26171589

  18. Estimating proportions of objects from multispectral scanner data

    NASA Technical Reports Server (NTRS)

    Horwitz, H. M.; Lewis, J. T.; Pentland, A. P.

    1975-01-01

    Progress is reported in developing and testing methods of estimating, from multispectral scanner data, proportions of target classes in a scene when there are a significiant number of boundary pixels. Procedures were developed to exploit: (1) prior information concerning the number of object classes normally occurring in a pixel, and (2) spectral information extracted from signals of adjoining pixels. Two algorithms, LIMMIX and nine-point mixtures, are described along with supporting processing techniques. An important by-product of the procedures, in contrast to the previous method, is that they are often appropriate when the number of spectral bands is small. Preliminary tests on LANDSAT data sets, where target classes were (1) lakes and ponds, and (2) agricultural crops were encouraging.

  19. A Complete Public Archive for the Einstein Imaging Proportional Counter

    NASA Technical Reports Server (NTRS)

    Helfand, David J.

    1996-01-01

    Consistent with our proposal to the Astrophysics Data Program in 1992, we have completed the design, construction, documentation, and distribution of a flexible and complete archive of the data collected by the Einstein Imaging Proportional Counter. Along with software and data delivered to the High Energy Astrophysics Science Archive Research Center at Goddard Space Flight Center, we have compiled and, where appropriate, published catalogs of point sources, soft sources, hard sources, extended sources, and transient flares detected in the database along with extensive analyses of the instrument's backgrounds and other anomalies. We include in this document a brief summary of the archive's functionality, a description of the scientific catalogs and other results, a bibliography of publications supported in whole or in part under this contract, and a list of personnel whose pre- and post-doctoral education consisted in part in participation in this project.

  20. Observational evidence for travelling wave modes bearing distance proportional shifts

    NASA Astrophysics Data System (ADS)

    Guruprasad, V.

    2015-06-01

    Discrepancies of range between the Space Surveillance Network radars and the Deep Space Network in tracking the 1998 Earth flyby of NEAR, and between ESA's Doppler and range data in Rosetta's 2009 flyby, reveal a consistent excess delay, or lag, equal to instantaneous one-way travel time in the telemetry signals. These lags readily explain all details of the flyby anomaly, and are shown to be symptoms of chirp d'Alembertian travelling wave solutions, relating to traditional sinusoidal waves by a rotation of the spectral decomposition due to the clock acceleration caused by the Doppler rates during the flybys. The lags thus relate to special relativity, but yield distance proportional shifts like those of cosmology at short range.

  1. Forelimb segment length proportions in extant hominoids and Australopithecus afarensis.

    PubMed

    Drapeau, Michelle S M; Ward, Carol V

    2007-03-01

    Forelimb proportions have been used to infer locomotor adaptation in Australopithecus afarensis. However, little is known about proportions among individual forelimb segments in extant or fossil hominoids. The partial A. afarensis skeleton A.L. 438-1 and the more complete skeleton A.L. 288-1 provide the opportunity to assess relative length of the arm, forearm, wrist, and palm. We compare scaling relationships between pairs of forelimb bones of extant hominoids and A. afarensis, and length of individual forelimb elements to a body size surrogate. Hylobatids, and to a lesser extent orangutans, have the longest forelimb bones relative to size, although the carpus varies little among taxa, perhaps due to functional constraints of the wrist. Pan species are unique in having long metacarpals relative to ulnar length, demonstrating that they probably differ from the common chimp-human ancestor, and also that developmental mechanisms can be altered to results in differential growth of individual forelimb segments. A. afarensis has no forelimb bones that are significantly longer than those of humans for its size. It falls within the range of variation seen in modern humans for all comparisons relative to size, but appears to differ from the typical human brachial index due to a slightly shorter humerus and/or slightly longer ulna. It has short metacarpals like humans only among hominoids. Thus, while Pan may have elongated its metacarpus relative to ulnar length, A. afarensis may have reduced the length of its metacarpals and possibly its humerus relative to body size from the primitive condition.

  2. Outcome of total hip arthroplasty in small-proportioned patients.

    PubMed

    Rahimtoola, Z O; Finger, S; Imrie, S; Goodman, S B

    2000-01-01

    In a prospective, consecutive series, 41 total hip arthroplasties were performed in 27 small-proportioned patients with small femoral dimensions. The 17 female and 10 male patients averaged 23.6 years (range, 14-47 years), and the mean height and weight were 157 cm (range, 132-183 cm) and 53.5 kg (range, 36-84 kg). The most common preoperative diagnosis was juvenile rheumatoid arthritis in 18 patients (28 hips). Most patients were severely disabled in their daily activity, and 68% of the patients were classified as Charnley functional class C. The femoral implants consisted primarily of the proximally porous-coated miniature Anatomic Medullary Locking femoral component (AML/CDH, Depuy, Warsaw, IN) in 33 hips in 22 patients (average stem diameter, 9.5 mm; range, 8-12.0 mm). A porous ingrowth acetabular cup fixed with screws was used in all procedures. At an average follow-up of 51 months, Harris Hip Scores improved significantly from 34 points (range, 0-65 points) preoperatively to 85 points (range, 33-100 points) after arthroplasty. There were no intraoperative complications. There was 1 revision because of femoral implant loosening. Three cementless femoral components showed evidence of nonprogressive subsidence. One patient had significant bilateral acetabular component polyethylene wear and underwent revision. All other femoral and acetabular components were radiographically stable. The relief of pain and improvement of function were dramatic. The miniature AML/CDH femoral component, combined with an uncemented acetabular cup, provides a promising, off-the-shelf alternative in small-proportioned patients.

  3. Factors limiting the linearity of response of tissue equivalent proportional counters used in micro- and nano-dosimetry

    NASA Astrophysics Data System (ADS)

    Kowalski, T. Z.

    2017-01-01

    Proportional counters filled with tissue equivalent gas mixtures are extremely useful instruments and are being used extensively as sensitive detectors for all types of radiations to measure the energy transferred to small tissue volumes. The linearity of their response is of primary importance. So the investigation and clarification of the physical phenomena taking place in the counter and of the limits within which useful results may be obtained would contribute to a more efficient use and a wider application of these counters. The linearity of response in the dose and in the gas gain has been determined. Linearity in the dose is limited by the total count rate effect, while linearity in the gas gain is limited by secondary processes occurring in the electron avalanche and by the self-induced space charge effect.

  4. Pharmacokinetics and dose proportionality of ketoconazole in normal volunteers.

    PubMed Central

    Huang, Y C; Colaizzi, J L; Bierman, R H; Woestenborghs, R; Heykants, J

    1986-01-01

    Ketoconazole is an orally effective, broad-spectrum, systemic antifungal agent. The pharmacokinetics and bioavailability of ketoconazole given as a 200-mg single dose in a tablet, suspension, or solution were studied in 24 fasting healthy males by using a crossover design. Levels of ketoconazole in plasma were determined for up to 48 h by a sensitive reverse-phase high-performance liquid chromatography method. The absorption of ketoconazole was rapid, with mean maximum concentrations of the drug in plasma of 4.2, 5.0, and 6.2 micrograms/ml attained at 1.7, 1.2, and 1.0 h, respectively, after administration of the tablet, suspension, and solution, respectively. The mean distribution and elimination half-life values were 1.5 to 1.7 and 7.5 to 7.9 h, respectively. The mean oral clearance of the solution dose was 209 (+/- 82.9 [standard deviation]) ml/min, and the mean apparent volume of distribution was 88.31 (+/- 68.72) liters. The relative bioavailabilities for the tablet and suspension were 81.2 (+/- 33.5) and 89.0 (+/- 23.1)%, respectively, of that of the solution. The data indicated the bioequivalence of the tablet to the suspension and of the suspension of the solution. Dose proportionality of ketoconazole was also studied in 12 volunteers after they received solution doses of 200, 400, and 800 mg. Linear correlations between the dose and the maximum concentration of the drug in plasma, the time to the maximum concentration, and the area under the concentration-time curve were observed. However, the increase in the area under the curve was more than proportional to the dose given. The levels in plasma seemed to decay at a lower rate after 400- and 800-mg doses. The mean oral clearance decreased from 244.9 to 123.6 and 80.0 ml/min, respectively, as the dose increased from 200 to 400 and 800 mg. The apparent dose-dependent kinetics may have been due to the presystemic elimination and capacity-limited hepatic metabolism which become saturated at higher doses. PMID

  5. Design and performance of A 3He-free coincidence counter based on parallel plate boron-lined proportional technology

    NASA Astrophysics Data System (ADS)

    Henzlova, D.; Menlove, H. O.; Marlow, J. B.

    2015-07-01

    Thermal neutron counters utilized and developed for deployment as non-destructive assay (NDA) instruments in the field of nuclear safeguards traditionally rely on 3He-based proportional counting systems. 3He-based proportional counters have provided core NDA detection capabilities for several decades and have proven to be extremely reliable with range of features highly desirable for nuclear facility deployment. Facing the current depletion of 3He gas supply and the continuing uncertainty of options for future resupply, a search for detection technologies that could provide feasible short-term alternative to 3He gas was initiated worldwide. As part of this effort, Los Alamos National Laboratory (LANL) designed and built a 3He-free full scale thermal neutron coincidence counter based on boron-lined proportional technology. The boron-lined technology was selected in a comprehensive inter-comparison exercise based on its favorable performance against safeguards specific parameters. This paper provides an overview of the design and initial performance evaluation of the prototype High Level Neutron counter-Boron (HLNB). The initial results suggest that current HLNB design is capable to provide ~80% performance of a selected reference 3He-based coincidence counter (High Level Neutron Coincidence Counter, HLNCC). Similar samples are expected to be measurable in both systems, however, slightly longer measurement times may be anticipated for large samples in HLNB. The initial evaluation helped to identify potential for further performance improvements via additional tailoring of boron-layer thickness.

  6. Design and performance of A 3He-free coincidence counter based on parallel plate boron-lined proportional technology

    DOE PAGES

    Henzlova, D.; Menlove, H. O.; Marlow, J. B.

    2015-07-01

    Thermal neutron counters utilized and developed for deployment as non-destructive assay (NDA) instruments in the field of nuclear safeguards traditionally rely on 3He-based proportional counting systems. 3He-based proportional counters have provided core NDA detection capabilities for several decades and have proven to be extremely reliable with range of features highly desirable for nuclear facility deployment. Facing the current depletion of 3He gas supply and the continuing uncertainty of options for future resupply, a search for detection technologies that could provide feasible short-term alternative to 3He gas was initiated worldwide. As part of this effort, Los Alamos National Laboratory (LANL) designedmore » and built a 3He-free full scale thermal neutron coincidence counter based on boron-lined proportional technology. The boronlined technology was selected in a comprehensive inter-comparison exercise based on its favorable performance against safeguards specific parameters. This paper provides an overview of the design and initial performance evaluation of the prototype High Level Neutron counter – Boron (HLNB). The initial results suggest that current HLNB design is capable to provide ~80% performance of a selected reference 3He-based coincidence counter (High Level Neutron Coincidence Counter, HLNCC). Similar samples are expected to be measurable in both systems, however, slightly longer measurement times may be anticipated for large samples in HLNB. The initial evaluation helped to identify potential for further performance improvements via additional tailoring of boron-layer thickness.« less

  7. Substantial proportion of global streamflow less than three months old

    NASA Astrophysics Data System (ADS)

    Jasechko, Scott; Kirchner, James W.; Welker, Jeffrey M.; McDonnell, Jeffrey J.

    2016-02-01

    Biogeochemical cycles, contaminant transport and chemical weathering are regulated by the speed at which precipitation travels through landscapes and reaches streams. Streamflow is a mixture of young and old precipitation, but the global proportions of these young and old components are not known. Here we analyse seasonal cycles of oxygen isotope ratios in rain, snow and streamflow compiled from 254 watersheds around the world, and calculate the fraction of streamflow that is derived from precipitation that fell within the past two or three months. This young streamflow accounts for about a third of global river discharge, and comprises at least 5% of discharge in about 90% of the catchments we investigated. We conclude that, although typical catchments have mean transit times of years or even decades, they nonetheless can rapidly transmit substantial fractions of soluble contaminant inputs to streams. Young streamflow is less prevalent in steeper landscapes, which suggests they are characterized by deeper vertical infiltration. Because young streamflow is derived from less than 0.1% of global groundwater storage, we conclude that this thin veneer of aquifer storage will have a disproportionate influence on stream water quality.

  8. Fluid-dynamic design optimization of hydraulic proportional directional valves

    NASA Astrophysics Data System (ADS)

    Amirante, Riccardo; Catalano, Luciano Andrea; Poloni, Carlo; Tamburrano, Paolo

    2014-10-01

    This article proposes an effective methodology for the fluid-dynamic design optimization of the sliding spool of a hydraulic proportional directional valve: the goal is the minimization of the flow force at a prescribed flow rate, so as to reduce the required opening force while keeping the operation features unchanged. A full three-dimensional model of the flow field within the valve is employed to accurately predict the flow force acting on the spool. A theoretical analysis, based on both the axial momentum equation and flow simulations, is conducted to define the design parameters, which need to be properly selected in order to reduce the flow force without significantly affecting the flow rate. A genetic algorithm, coupled with a computational fluid dynamics flow solver, is employed to minimize the flow force acting on the valve spool at the maximum opening. A comparison with a typical single-objective optimization algorithm is performed to evaluate performance and effectiveness of the employed genetic algorithm. The optimized spool develops a maximum flow force which is smaller than that produced by the commercially available valve, mainly due to some major modifications occurring in the discharge section. Reducing the flow force and thus the electromagnetic force exerted by the solenoid actuators allows the operational range of direct (single-stage) driven valves to be enlarged.

  9. One-step quantitative cortisol dipstick with proportional reading.

    PubMed

    Leung, Wingman; Chan, Puiyee; Bosgoed, Freddy; Lehmann, Karin; Renneberg, Ilka; Lehmann, Matthias; Renneberg, Reinhard

    2003-10-01

    Rapid quantitative immuno-detection of haptens by the lateral flow assay without "typical" competitive inhibition results is studied. In the present study, we describe an immuno-threshold-based assay for the quantification of cortisol. It gives a signal which is directly proportional to the cortisol concentration in plasma samples with a performance time of only 5 min. This technique provides a practical calibration curve with detection limit of 3.5 ng/ml. The precision of the assay is 6% (intra-assay coefficient of variation, CV) and 10% (inter-assay CV). Cross-reactivity with related steroids is acceptably low: corticosterone (3.38%), cortisone (2.08%), deoxycorticosterone (2.00%), 17alpha-hydroxyprogesterone (0.39%), and progesterone (0.05%). Furthermore, the test strips show the advantages of long storage time and high stability that allow mass production and preparation of large batches. A one-step cortisol whole blood test derived from this plasma lateral flow assay has then been performed. It is a rapid chromatographic immunoassay designed for quantitative determination of cortisol in whole blood samples. It requires no sample pretreatment and gives result within 15 min. In principle, with this rapid and sensitive immunoassay, the immuno-test strips can be employed for detecting all low-molecular-weight haptens. It may also be a useful and convenient dipstick format for drug detection.

  10. Tire Force Estimation using a Proportional Integral Observer

    NASA Astrophysics Data System (ADS)

    Farhat, Ahmad; Koenig, Damien; Hernandez-Alcantara, Diana; Morales-Menendez, Ruben

    2017-01-01

    This paper addresses a method for detecting critical stability situations in the lateral vehicle dynamics by estimating the non-linear part of the tire forces. These forces indicate the road holding performance of the vehicle. The estimation method is based on a robust fault detection and estimation approach which minimize the disturbance and uncertainties to residual sensitivity. It consists in the design of a Proportional Integral Observer (PIO), while minimizing the well known H ∞ norm for the worst case uncertainties and disturbance attenuation, and combining a transient response specification. This multi-objective problem is formulated as a Linear Matrix Inequalities (LMI) feasibility problem where a cost function subject to LMI constraints is minimized. This approach is employed to generate a set of switched robust observers for uncertain switched systems, where the convergence of the observer is ensured using a Multiple Lyapunov Function (MLF). Whilst the forces to be estimated can not be physically measured, a simulation scenario with CarSimTM is presented to illustrate the developed method.

  11. High proportion of cactus species threatened with extinction.

    PubMed

    Goettsch, Bárbara; Hilton-Taylor, Craig; Cruz-Piñón, Gabriela; Duffy, James P; Frances, Anne; Hernández, Héctor M; Inger, Richard; Pollock, Caroline; Schipper, Jan; Superina, Mariella; Taylor, Nigel P; Tognelli, Marcelo; Abba, Agustín M; Arias, Salvador; Arreola-Nava, Hilda J; Baker, Marc A; Bárcenas, Rolando T; Barrios, Duniel; Braun, Pierre; Butterworth, Charles A; Búrquez, Alberto; Caceres, Fátima; Chazaro-Basañez, Miguel; Corral-Díaz, Rafael; Del Valle Perea, Mario; Demaio, Pablo H; Duarte de Barros, Williams A; Durán, Rafael; Yancas, Luis Faúndez; Felger, Richard S; Fitz-Maurice, Betty; Fitz-Maurice, Walter A; Gann, George; Gómez-Hinostrosa, Carlos; Gonzales-Torres, Luis R; Patrick Griffith, M; Guerrero, Pablo C; Hammel, Barry; Heil, Kenneth D; Hernández-Oria, José Guadalupe; Hoffmann, Michael; Ishihara, Mario Ishiki; Kiesling, Roberto; Larocca, João; León-de la Luz, José Luis; Loaiza S, Christian R; Lowry, Martin; Machado, Marlon C; Majure, Lucas C; Ávalos, José Guadalupe Martínez; Martorell, Carlos; Maschinski, Joyce; Méndez, Eduardo; Mittermeier, Russell A; Nassar, Jafet M; Negrón-Ortiz, Vivian; Oakley, Luis J; Ortega-Baes, Pablo; Ferreira, Ana Beatriz Pin; Pinkava, Donald J; Porter, J Mark; Puente-Martinez, Raul; Gamarra, José Roque; Pérez, Patricio Saldivia; Martínez, Emiliano Sánchez; Smith, Martin; Manuel Sotomayor M Del C, J; Stuart, Simon N; Muñoz, José Luis Tapia; Terrazas, Teresa; Terry, Martin; Trevisson, Marcelo; Valverde, Teresa; Van Devender, Thomas R; Véliz-Pérez, Mario Esteban; Walter, Helmut E; Wyatt, Sarah A; Zappi, Daniela; Alejandro Zavala-Hurtado, J; Gaston, Kevin J

    2015-10-05

    A high proportion of plant species is predicted to be threatened with extinction in the near future. However, the threat status of only a small number has been evaluated compared with key animal groups, rendering the magnitude and nature of the risks plants face unclear. Here we report the results of a global species assessment for the largest plant taxon evaluated to date under the International Union for Conservation of Nature (IUCN) Red List Categories and Criteria, the iconic Cactaceae (cacti). We show that cacti are among the most threatened taxonomic groups assessed to date, with 31% of the 1,478 evaluated species threatened, demonstrating the high anthropogenic pressures on biodiversity in arid lands. The distribution of threatened species and the predominant threatening processes and drivers are different to those described for other taxa. The most significant threat processes comprise land conversion to agriculture and aquaculture, collection as biological resources, and residential and commercial development. The dominant drivers of extinction risk are the unscrupulous collection of live plants and seeds for horticultural trade and private ornamental collections, smallholder livestock ranching and smallholder annual agriculture. Our findings demonstrate that global species assessments are readily achievable for major groups of plants with relatively moderate resources, and highlight different conservation priorities and actions to those derived from species assessments of key animal groups.

  12. Proportion of recovered duck bands that are reported

    USGS Publications Warehouse

    Martinson, R.K.

    1966-01-01

    Band-reporting rates (the proportion of duck bands recovered by hunters that are actually reported to the Bird Banding Laboratory) appear to have decreased between the late 1950's and early 1960's. About one-half the banded ducks bagged during the 1958-59 and 1959-60 hunting seasons were reported-a rate similar to those recorded in other studies conducted during the early and mid-1950's. Band-reporting rates were lower for the 1962-63 and 1962-64 hunting seasons; less than one-third of the banded ducks bagged were reported. This decrease in band-reporting rates was concurrent with significant changes in duck hunting regulations, the volume of duck banding, and the method used to relay information to the person who reports a band. Band-reporting rates differed for various species of ducks. In general, band-reporting rates were high on canvasbacks (Aythya valisineria), redheads (A. americana), and pintails Anas acuta) and low for teals (Anas discors and A. carolinensis).

  13. The proportion of cancer attributable to occupational exposures

    PubMed Central

    Purdue, Mark P.; Hutchings, Sally J.; Rushton, Lesley; Silverman, Debra T.

    2015-01-01

    Purpose To review the literature on the estimation of the population attributable fraction (PAF) of cancer due to occupational exposures and to describe challenges in the estimation of this metric. To help illustrate the inherent challenges, we also estimate PAFs for selected cancers diagnosed in the United States in 2010 attributable to work as a painter (causally associated with bladder and lung cancer) and shiftwork (possibly associated with breast cancer). Methods We reviewed and summarized previous reports providing quantitative estimates of PAF for total cancer due to occupational exposures. We calculated PAF estimates for painters and shiftwork using methodology from a detailed investigation of the occupational cancer burden in Great Britain, with adaptations made for the U.S. population. Results The estimated occupation-attributable fraction for total cancer generally ranged between 2% and 8% (men, 3-14%; women, 1-2%) based on previous reports. We calculated that employment as a painter accounted for a very small proportion of cancers of the bladder and lung diagnosed in the United States in 2010, with PAFs of 0.5% for each site. In contrast, our calculations suggest that the potential impact of shiftwork on breast cancer (if causal) could be substantial, with a PAF of 5.7%, translating to 11,777 attributable breast cancers. Conclusions Continued efforts to estimate the occupational cancer burden will be important as scientific evidence and economic trends evolve. Such projects should consider the challenges involved in PAF estimation, which we summarize in this report. PMID:25487971

  14. It's All Connected: The Power of Proportional Reasoning to Understand Mathematics Concepts, Gr. 6-8

    ERIC Educational Resources Information Center

    Whitman, Carmen

    2011-01-01

    "It's All Connected" provides teachers of mathematics the support they need to improve their instruction. This in-demand collection of lessons for grades 6-8 explores proportionality, proportional relationships, and proportional reasoning, acknowledging that the ability to reason proportionally is crucial in the middle school mathematics…

  15. 3He Neutron Detector Pressure Effect and Comparison to Models

    SciTech Connect

    Kouzes, Richard T.; Ely, James H.; Lintereur, Azaree T.; Siciliano, Edward R.; Stromswold, David C.; Woodring, Mitchell L.

    2010-01-14

    Reported here are the results of measurements performed to determine the efficiency of 3He filled proportional counters as a function of gas pressure in the SAIC system. Motivation for these measurements was largely to validate the current model of the SAIC system. Those predictions indicated that the neutron detection efficiency plotted as a function of pressure has a simple, logarithmic shape. As for absolute performance, the model results indicated the 3He pressure in the current SAIC system could not be reduced appreciably while meeting the current required level of detection sensitivity. Thus, saving 3He by reducing its pressure was predicted not to be a viable option in the current SAIC system.

  16. Measurement of aesthetic proportions in the profile view of Koreans.

    PubMed

    Wang, Jong Hwan; Jang, Yong Ju; Park, Soo-Kyung; Lee, Bong-Jae

    2009-02-01

    We have evaluated the usefulness of direct soft tissue measurements in profile photographs for determining the nasal proportions and angles of young Korean individuals and those of rhinoplasty patients, and we compared these findings with existing norms of Caucasian populations. We retrospectively compared preoperative profile measurements of nasal length, nasal tip projection, dorsal height, radix height, nasolabial angle, and nasofrontal angle in 123 patients who underwent rhinoplasty, with measurements in 21 young Korean adults. Rhinoplasty patients were grouped by preoperative diagnosis as deviated nose without saddle or hump, saddle nose, hump nose, and low radix. The young Koreans had a nasal length to nasal tip projection to dorsal height to radix height ratio of 2:0.97:0.61:0.28. Dorsal height differed significantly among groups of rhinoplasty patients. Those with low radix had the lowest dorsal and radix height, whereas those with saddle nose had the smallest nasal tip projection. The average nasolabial and nasofrontal angles were 78.5 degrees and 82.7 degrees, respectively, in young male Koreans and 126.0 degrees and 133.6 degrees, respectively, in young female Koreans. In the deviated nose group, all parameters except for nasofrontal angle were significantly changed after rhinoplasty. In the saddle nose group, nasal tip projection and dorsal height were significantly increased, whereas, in the hump nose group, nasal tip projection and nasolabial angle were significantly altered. Direct soft tissue measurement on profile photographs is useful for assessing nasal characteristics and postrhinoplasty outcomes. Compared with Caucasians, young Koreans had relatively lower dorsum and radix and more acute nasolabial angle, but similar nasofrontal angle.

  17. Proportioning and performance evaluation of self-consolidating concrete

    NASA Astrophysics Data System (ADS)

    Wang, Xuhao

    A well-proportioned self-consolidating concrete (SCC) mixture can be achieved by controlling the aggregate system, paste quality, and paste quantity. The work presented in this dissertation involves an effort to study and improve particle packing of the concrete system and reduce the paste quantity while maintaining concrete quality and performance. This dissertation is composed of four papers resulting from the study: (1) Assessing Particle Packing Based Self-Consolidating Concrete Mix Design; (2) Using Paste-To-Voids Volume Ratio to Evaluate the Performance of Self-Consolidating Concrete Mixtures; (3) Image Analysis Applications on Assessing Static Stability and Flowability of Self-Consolidating Concrete, and (4) Using Ultrasonic Wave Propagation to Monitor Stiffening Process of Self-Consolidating Concrete. Tests were conducted on a large matrix of SCC mixtures that were designed for cast-in-place bridge construction. The mixtures were made with different aggregate types, sizes, and different cementitious materials. In Paper 1, a modified particle-packing based mix design method, originally proposed by Brouwers (2005), was applied to the design of self-consolidating concrete (SCC) mixs. Using this method, a large matrix of SCC mixes was designed to have a particle distribution modulus (q) ranging from 0.23 to 0.29. Fresh properties (such as flowability, passing ability, segregation resistance, yield stress, viscosity, set time and formwork pressure) and hardened properties (such as compressive strength, surface resistance, shrinkage, and air structure) of these concrete mixes were experimentally evaluated. In Paper 2, a concept that is based on paste-to-voids volume ratio (Vpaste/Vvoids) was employed to assess the performance of SCC mixtures. The relationship between excess paste theory and Vpaste/Vvoids was investigated. The workability, flow properties, compressive strength, shrinkage, and surface resistivity of SCC mixtures were determined at various ages

  18. Air pollution and lymphocyte phenotype proportions in cord blood.

    PubMed

    Hertz-Picciotto, Irva; Herr, Caroline E W; Yap, Poh-Sin; Dostál, Miroslav; Shumway, Robert H; Ashwood, Paul; Lipsett, Michael; Joad, Jesse P; Pinkerton, Kent E; Srám, Radim J

    2005-10-01

    Effects of air pollution on morbidity and mortality may be mediated by alterations in immune competence. In this study we examined short-term associations of air pollution exposures with lymphocyte immunophenotypes in cord blood among 1,397 deliveries in two districts of the Czech Republic. We measured fine particulate matter < 2.5 microm in diameter (PM2.5) and 12 polycyclic aromatic hydrocarbons (PAHs) in 24-hr samples collected by versatile air pollution samplers. Cord blood samples were analyzed using a FACSort flow cytometer to determine phenotypes of CD3+ T-lymphocytes and their subsets CD4+ and CD8+, CD19+ B-lymphocytes, and natural killer cells. The mothers were interviewed regarding sociodemographic and lifestyle factors, and medical records were abstracted for obstetric, labor and delivery characteristics. During the period 1994 to 1998, the mean daily ambient concentration of PM2.5 was 24.8 microg/m3 and that of PAHs was 63.5 ng/m3. In multiple linear regression models adjusted for temperature, season, and other covariates, average PAH or PM2.5 levels during the 14 days before birth were associated with decreases in T-lymphocyte phenotype fractions (i.e., CD3+ CD4+, and CD8+), and a clear increase in the B-lymphocyte (CD19+) fraction. For a 100-ng/m3 increase in PAHs, which represented approximately two standard deviations, the percentage decrease was -3.3% [95% confidence interval (CI), -5.6 to -1.0%] for CD3+, -3.1% (95% CI, -4.9 to -1.3%) for CD4+, and -1.0% (95% CI, -1.8 to -0.2%) for CD8+ cells. The corresponding increase in the CD19+ cell proportion was 1.7% (95% CI, 0.4 to 3.0%). Associations were similar but slightly weaker for PM2.5. Ambient air pollution may influence the relative distribution of lymphocyte immunophenotypes of the fetus.

  19. Discussion on seismic technique for gas exploration

    SciTech Connect

    Mingru, W.; Xianjue, G.; Honglin, Q. )

    1991-01-01

    The research result of seismic gas exploration in east Chaidamu basin leads to a common conclusion, interval velocity drop {Delta}{nu} higher than 300m/s a productive gas reservoir, and {Delta}{nu} above 400m/s a high-productive gas reservoir; that is to say, the bigger the interval velocity drop is, the richer the gas in a formation is. However, the author of this paper thinks that the conclusion is unlikely to be reliable because {Delta}{nu} is not directly proportional to gas content in a formation, and present techniques fail to determine accurate {Delta}{nu}.

  20. First results of a simultaneous measurement of tritium and 14C in an ultra-low-background proportional counter for environmental sources of methane

    SciTech Connect

    Mace, Emily K.; Aalseth, Craig E.; Day, Anthony R.; Hoppe, Eric W.; Keillor, Martin E.; Moran, James J.; Panisko, Mark E.; Seifert, Allen; Tatishvili, Gocha; Williams, Richard M.

    2016-02-01

    Abstract Simultaneous measurement of tritium and 14C would provide an added tool for tracing organic compounds through environmental systems and is possible via beta energy spectroscopy of sample-derived methane in internal-source gas proportional counters. Since the mid-1960’s atmospheric tritium and 14C have fallen dramatically as the isotopic injections from above-ground nuclear testing have been diluted into the ocean and biosphere. In this work, the feasibility of simultaneous tritium and 14C measurements via proportional counters is revisited in light of significant changes in both the atmospheric and biosphere isotopics and the development of new ultra-low-background gas proportional counting capabilities for small samples (roughly 50 cc methane). A Geant4 Monte Carlo model of a Pacific Northwest National Laboratory (PNNL) proportional counter response to tritium and 14C is used to analyze small samples of two different methane sources to illustrate the range of applicability of contemporary simultaneous measurements and their limitations. Because the two methane sources examined were not sample size limited, we could compare the small-sample measurements performed at PNNL with analysis of larger samples performed at a commercial laboratory. The dual-isotope simultaneous measurement is well matched for methane samples that are atmospheric or have an elevated source of tritium (i.e. landfill gas). For samples with low/modern tritium isotopics (rainwater), commercial separation and counting is a better fit.

  1. First results of a simultaneous measurement of tritium and (14)C in an ultra-low-background proportional counter for environmental sources of methane.

    PubMed

    Mace, E K; Aalseth, C E; Day, A R; Hoppe, E W; Keillor, M E; Moran, J J; Panisko, M E; Seifert, A; Tatishvili, G; Williams, R M

    2016-05-01

    Simultaneous measurement of tritium and (14)C would provide an added tool for tracing organic compounds through environmental systems and is possible via beta energy spectroscopy of sample-derived methane in internal-source gas proportional counters. Since the mid-1960's atmospheric tritium and (14)C have fallen dramatically as the isotopic injections from aboveground nuclear testing have been diluted into the ocean and biosphere. In this work, the feasibility of simultaneous tritium and (14)C measurements via proportional counters is revisited in light of significant changes in both the atmospheric and biosphere isotopics and the development of new ultra-low-background gas proportional counting capabilities for small samples (roughly 50 cc methane). A Geant4 Monte Carlo model of a Pacific Northwest National Laboratory (PNNL) proportional counter response to tritium and (14)C is used to analyze small samples of two different methane sources to illustrate the range of applicability of contemporary simultaneous measurements and their limitations. Because the two methane sources examined were not sample size limited, we could compare the small-sample measurements performed at PNNL with analysis of larger samples performed at a commercial laboratory. These first results show that the dual-isotope simultaneous measurement is well matched for methane samples that are atmospheric or have an elevated source of tritium (i.e. landfill gas). However, for samples with low/modern tritium isotopics (rainwater), commercial separation and counting is a better fit.

  2. Gas separating

    DOEpatents

    Gollan, Arye Z.

    1990-12-25

    Feed gas is directed tangentially along the non-skin surface of gas separation membrane modules comprising a cylindrical bundle of parallel contiguous hollow fibers supported to allow feed gas to flow from an inlet at one end of a cylindrical housing through the bores of the bundled fibers to an outlet at the other end while a component of the feed gas permeates through the fibers, each having the skin side on the outside, through a permeate outlet in the cylindrical casing.

  3. Gas separating

    DOEpatents

    Gollan, Arye

    1988-01-01

    Feed gas is directed tangentially along the non-skin surface of gas separation membrane modules comprising a cylindrical bundle of parallel contiguous hollow fibers supported to allow feed gas to flow from an inlet at one end of a cylindrical housing through the bores of the bundled fibers to an outlet at the other end while a component of the feed gas permeates through the fibers, each having the skin side on the outside, through a permeate outlet in the cylindrical casing.

  4. Cox Proportional Hazards Models for Modeling the Time to Onset of Decompression Sickness in Hypobaric Environments

    NASA Technical Reports Server (NTRS)

    Thompson, Laura A.; Chhikara, Raj S.; Conkin, Johnny

    2003-01-01

    In this paper we fit Cox proportional hazards models to a subset of data from the Hypobaric Decompression Sickness Databank. The data bank contains records on the time to decompression sickness (DCS) and venous gas emboli (VGE) for over 130,000 person-exposures to high altitude in chamber tests. The subset we use contains 1,321 records, with 87% censoring, and has the most recent experimental tests on DCS made available from Johnson Space Center. We build on previous analyses of this data set by considering more expanded models and more detailed model assessments specific to the Cox model. Our model - which is stratified on the quartiles of the final ambient pressure at altitude - includes the final ambient pressure at altitude as a nonlinear continuous predictor, the computed tissue partial pressure of nitrogen at altitude, and whether exercise was done at altitude. We conduct various assessments of our model, many of which are recently developed in the statistical literature, and conclude where the model needs improvement. We consider the addition of frailties to the stratified Cox model, but found that no significant gain was attained above a model that does not include frailties. Finally, we validate some of the models that we fit.

  5. Miniature proportional counter for compression measurements of laser-fusion targets

    SciTech Connect

    Lane, S.M.; Dellis, J.H.; Bennett, C.K.; Campbell, E.M.

    1981-10-01

    Direct drive laser fusion targets consisting of DT gas encapsulated in glass microshells produce 14.1 MeV neutrons that can interact with silicon-28 nuclei in the glass to produce a 2.2 minute aluminum-28 activity. From the number of /sup 28/Al nuclei created and the neutron yield, the compressed glass areal density can be found. To determine the number of activated atoms created, we collect approximately one-half of the target debris on a thin metal foil which is transferred to our beta-gamma coincidence detector. This detector consists of a 25 cm x 25 cm NaI(Tl) crystal having a 5 cm x 15 cm well. We have recently built a miniature proportional counter that fits into this well and is used to detect beta particles. It is constructed of .025 cm thick copper and has nine separate chambers through which methane flows. The coincidence background is 0.14 cpm and the measured beta efficiency is 45%. We are now building a .0125 cm thick counter made of aluminum having a predicted efficiency of > 90%.

  6. Lithium glass scintillator neutron detector as an improved alternative to the standard 3 he proportional counter

    SciTech Connect

    Vladimir Popov, Pavel Degtiarenko

    2011-06-01

    Lithium glass scintillator made from 6Li-enriched substrate is a well known for its neutron detection capability. In spite of neutron interaction, cross section of 6Li happens to be lower than that of 3He. However, the neutron detection efficiency could be higher due to higher volume content of 6Li nuclear in the solid scintillator vs. gas filled proportional counter. At the same time, as lithium glass is sensitive to gamma and charge particle radiation, non-neutron radiation discrimination is required. Our detector is composed of two equal-size cylindrical Li(Ce) glass scintillators. The first one is high-sensitive to thermal neutrons GS-20 (6Li doped), the second one is GS-30 (7Li doped) type Scint-Gobain made lithium glass scintillator. Each of scintillators is coupled with R7400U Hamamatsu subminiature photomultiplier tube, and all assembly is fitted into NP100H 3He tube size. 6Li absorbs thermal neutrons releasing alpha particles and triton with 4.8 MeV total energy deposit inside the scintillator (equivalent to about ~1.3 MeV gamma energy depositions). Because 7Li isotope does not absorb thermal neutrons, and the physical properties of the two scintillators are virtually identical, the difference between these two scintillators could be used to provide neutron dose rate information. Results of study of neutron detector assembled of two Li(Ce) scintillators and NP100H moderator are presented

  7. Use of the small proportional counter for carbon 14 measurement in 10 milligram carbon samples

    SciTech Connect

    Sayre, E.V.; Harbottle, G.; Stoenner, R.W.; Otlet, R.L.

    1981-01-01

    Ten years ago, the measurement of C-14/C-12 ratios in 10 milligram carbon samples seemed to be technically out of reach. However, two developments that make this goal possible have recently occurred: the first is an entirely new mass-spectrometric separation of C-14 and C-12 ions and their subsequent estimation by counting, while the second is simply the extension of conventional proportional counter operation (using CO/sub 2/ as counter gas) to very small size carbon samples. The first method is very fast, precise, and capable of treating samples of even sub-milligram size, but requires an expensive installation. The second method is slow (counting times of two months or more are necessary), can probably be made sufficiently precise to handle most problems, works down to sample sizes of 10 mg carbon, and is relatively inexpensive, especially to install in already existing radiocarbon laboratories. It is this second method and its implications that are discussed in the present paper.

  8. Methane emissions proportional to permafrost carbon thawed in Arctic lakes since the 1950s

    NASA Astrophysics Data System (ADS)

    Walter Anthony, Katey; Daanen, Ronald; Anthony, Peter; Schneider von Deimling, Thomas; Ping, Chien-Lu; Chanton, Jeffrey P.; Grosse, Guido

    2016-09-01

    Permafrost thaw exposes previously frozen soil organic matter to microbial decomposition. This process generates methane and carbon dioxide, and thereby fuels a positive feedback process that leads to further warming and thaw. Despite widespread permafrost degradation during the past ~40 years, the degree to which permafrost thaw may be contributing to a feedback between warming and thaw in recent decades is not well understood. Radiocarbon evidence of modern emissions of ancient permafrost carbon is also sparse. Here we combine radiocarbon dating of lake bubble trace-gas methane (113 measurements) and soil organic carbon (289 measurements) for lakes in Alaska, Canada, Sweden and Siberia with numerical modelling of thaw and remote sensing of thermokarst shore expansion. Methane emissions from thermokarst areas of lakes that have expanded over the past 60 years were directly proportional to the mass of soil carbon inputs to the lakes from the erosion of thawing permafrost. Radiocarbon dating indicates that methane age from lakes is nearly identical to the age of permafrost soil carbon thawing around them. Based on this evidence of landscape-scale permafrost carbon feedback, we estimate that 0.2 to 2.5 Pg permafrost carbon was released as methane and carbon dioxide in thermokarst expansion zones of pan-Arctic lakes during the past 60 years.

  9. Large-area proportional counter camera for the US National Small-Angle Neutron Scattering Facility

    SciTech Connect

    Abele, R.K.; Allin, G.W.; Clay, W.T.; Fowler, C.E.; Kopp, M.K.

    1980-01-01

    An engineering model of a multiwire position-sensitive proportional-counter (PSPC) was developed, tested, and installed at the US National Small-Angle Neutron Scattering Facility at ORNL. The PSPC is based on the RC-encoding and time-difference decoding method to measure the spatial coordinates of the interaction loci of individual scattered neutrons. The active area of the PSPC is 65 cm x 65 cm, and the active depth is 3.6 cm. The spatial uncertainty in both coordinates is approx. 1.0 cm (fwhm) for thermal neutrons; thus, a matrix of 64 x 64 picture elements is resolved. The count rate capability for randomly detected neutrons is 10/sup 4/ counts per second, with < 3% coincidence loss. The PSPC gas composition is 63% /sup 3/He, 32% Xe, and 5% CO/sub 2/ at an absolute pressure of approx. 3 x 10/sup 5/ Pa (3 atm). The detection efficiency is approx. 90% for the 0.475-nm (4.75-A) neutrons used in the scattering experiments.

  10. Large Area X-ray Proportional Counter (LAXPC) instrument onboard ASTROSAT

    NASA Astrophysics Data System (ADS)

    Yadav, J. S.; Agrawal, P. C.; Antia, H. M.; Chauhan, Jai Verdhan; Dedhia, Dhiraj; Katoch, Tilak; Madhwani, P.; Manchanda, R. K.; Misra, Ranjeev; Pahari, Mayukh; Paul, B.; Shah, Parag

    2016-07-01

    ASTROSAT, India's first dedicated astronomy space mission was launched on September 28, 2015. The Large Area X-ray Proportional Counter (LAXPC) is one of the major payloads on ASTROSAT. A cluster of three co-aligned identical LAXPC detectors provide large area of collection .The large detection volume (15 cm depth) filled with mixture of xenon gas (90(%) and methane (10%) at 2 atmospheres pressure, results in detection efficiency greater than 50%, above 30 keV. The LAXPC instrument is best suited for X-ray timing and spectral studies. It will provide the largest effective area in 3-80 keV range among all the satellite missions flown so far worldwide and will remain so for the next 5-10 years. The LAXPC detectors have been calibrated using radioactive sources in the laboratory. GEANT4 simulation for LAXPC detectors was carried out to understand detector background and its response. The LAXPC instrument became fully operational on 19th October 2015 for the first time in space. We have performed detector calibration in orbit. The LAXPC instrument is functioning well and has achieved all detector parameters proposed initially. In this paper, we will describe LAXPC detector calibration in lab as well as in orbit along with first results.

  11. Gestational Diabetes Mellitus Upsets the Proportion of Fatty Acids in Umbilical Arterial but Not Venous Plasma

    PubMed Central

    Ortega-Senovilla, Henar; Alvino, Gioia; Taricco, Emanuela; Cetin, Irene; Herrera, Emilio

    2009-01-01

    OBJECTIVE—Neonates of women with gestational diabetes mellitus (GDM) have reduced levels of arachidonic acid (AA) (20:4 n-6) and docosahexaenoic acid (DHA) (22:6 n-3). To assess whether this is the result of impaired placental transfer or endogenous fetal metabolism, fatty acids in umbilical venous and arterial plasma were analyzed in neonates of GDM women. RESEARCH DESIGN AND METHODS—Fatty acids were analyzed by gas chromatography in the plasma of 15 subjects with GDM and 30 healthy control subjects undergoing elective cesarean section and in vein and artery cord blood collected separately. RESULTS—The percentages of AA (20:4 n-6), DHA (22:6 n-3), and total n-6 or n-3 polyunsaturated fatty acids (PUFAs) as well as total PUFAs were lower in umbilical arterial but not in venous plasma of neonates of the GDM versus the control group. CONCLUSIONS—An altered handling or metabolism of long-chain PUFAs by the fetus rather than impaired placental transfer seems to be responsible for the lower proportion of those fatty acids in the plasma of neonates of GDM mothers. PMID:18852337

  12. Evidence for a High Proportion of Atmospheric Organic Aerosol from Isoprene

    NASA Astrophysics Data System (ADS)

    Robinson, Niall H.; Hamilton, Jacqueline F.; Langford, Ben; Oram, David E.; Barley, Mark H.; Jenkin, Michael E.; Rickard, Andrew R.; Coe, Hugh; McFiggans, Gordon

    2010-05-01

    and by comparison of aerosol to gas phase precursor measurements. Isoprene SOA is estimated to compose as much as 12% of the total organic aerosol loading with a median proportion of 7%, during the OP3 campaign. This is the first atmospheric measurement of SOA from isoprene and the proposed source is currently not included in atmospheric aerosol models.

  13. Proportions of Women Faculty and Students in the Mathematical Sciences: A Trend Analysis by Institutional Group.

    ERIC Educational Resources Information Center

    Sharpe, Norean Radke; Sonnert, Gerhard

    1999-01-01

    Examines how gender proportions of faculty and undergraduate majors in the mathematical sciences vary across institutional groups and how these proportions have changed over time. Explores the relationship between the proportion of women faculty and women majors across institutional types as a test of the role-model hypothesis. Contains 36…

  14. Proportional Reasoning: How Do the 4th Graders Use Their Intuitive Understanding?

    ERIC Educational Resources Information Center

    Sumarto, Sylvana Novilia; van Galen, Frans; Zulkardi, H.; Darmawijoyo, D.

    2014-01-01

    In Indonesia, proportion is being taught formally in Grade 5 (10-11 years old). However, the existing learning approach does not support the development of the students' proportional reasoning. The way to teach proportion by giving cross multiplication is not meaningful for the students. They just memorize the procedure without understanding how…

  15. Icelandic 5th-Grade Girls' Developmental Trajectories in Proportional Reasoning

    ERIC Educational Resources Information Center

    Steinthorsdottir, Olof B.; Sriraman, Bharath

    2009-01-01

    Understanding of ratio and proportion is critical to the development of higher level mathematical skills. Following Carpenter, Gomez, et al.'s (1999) proposal of a four-level trajectory in the development of proportional reasoning, a 12-week investigation was undertaken of the developmental trajectory of proportional reasoning of girls in two…

  16. GAS PHOTOTUBE CIRCUIT

    DOEpatents

    Richardson, J.H.

    1958-03-01

    This patent pertains to electronic circuits for measuring the intensity of light and is especially concerned with measurement between preset light thresholds. Such a circuit has application in connection with devices for reading-out information stored on punch cards or tapes where the cards and tapes are translucent. By the novel arrangement of this invention thc sensitivity of a gas phototube is maintained at a low value when the light intensity is below a first threshold level. If the light level rises above the first threshold level, the tube is rendered highly sensitive and an output signal will vary in proportion to the light intensity change. When the light level decreases below a second threshold level, the gas phototube is automatically rendered highly insensitive. Each of these threshold points is adjustable.

  17. The proportions of muscle, bone and fat in two different types of dog.

    PubMed

    Gunn, H M

    1978-05-01

    This study compares the proportions of muscle, bone and fat (obtained by gross dissection) in greyhounds--a breed selected for high speed running--and other dogs, both at maturity and during growth. In adults the proportion of muscle is significantly greater in the 'athletic' greyhound. The proportion of muscle decreases but not significantly with detraining. Adult greyhounds have less fat (even when detrained) than other dogs, but the skeleton provides a similar proportion of liveweight in both types of dog when adult. The greater growth rate of muscle in athletes explains the difference in adult proportions.

  18. Analyzing Proportion Scores as Outcomes for Prevention Trials: a Statistical Primer.

    PubMed

    Chen, Kehui; Cheng, Yu; Berkout, Olga; Lindhiem, Oliver

    2016-03-10

    In prevention trials, outcomes of interest frequently include data that are best quantified as proportion scores. In some cases, however, proportion scores may violate the statistical assumptions underlying common analytic methods. In this paper, we provide guidelines for analyzing frequency and proportion data as primary outcomes. We describe standard methods including generalized linear regression models to compare mean proportion scores and examine tools for testing normality and other assumptions for each model. Recommendations are made for instances when the assumptions are not met, including transformations for proportion scores that are non-normal. We also discuss more sophisticated analytical tools to model change in proportion scores over time. The guidelines provide ready-to-use analytical strategies for frequency and proportion data that are commonly encountered in prevention science.

  19. Proportional reasoning as a heuristic-based process: time constraint and dual task considerations.

    PubMed

    Gillard, Ellen; Van Dooren, Wim; Schaeken, Walter; Verschaffel, Lieven

    2009-01-01

    The present study interprets the overuse of proportional solution methods from a dual process framework. Dual process theories claim that analytic operations involve time-consuming executive processing, whereas heuristic operations are fast and automatic. In two experiments to test whether proportional reasoning is heuristic-based, the participants solved "proportional" problems, for which proportional solution methods provide correct answers, and "nonproportional" problems known to elicit incorrect answers based on the assumption of proportionality. In Experiment 1, the available solution time was restricted. In Experiment 2, the executive resources were burdened with a secondary task. Both manipulations induced an increase in proportional answers and a decrease in correct answers to nonproportional problems. These results support the hypothesis that the choice for proportional methods is heuristic-based.

  20. GAS BEARING

    DOEpatents

    Skarstrom, C.W.

    1960-09-01

    A gas lubricated bearing for a rotating shaft is described. The assembly comprises a stationary collar having an annular member resiliently supported thereon. The collar and annular member are provided with cooperating gas passages arranged for admission of pressurized gas which supports and lubricates a bearing block fixed to the rotatable shaft. The resilient means for the annular member support the latter against movement away from the bearing block when the assembly is in operation.

  1. Gas vesicles.

    PubMed Central

    Walsby, A E

    1994-01-01

    The gas vesicle is a hollow structure made of protein. It usually has the form of a cylindrical tube closed by conical end caps. Gas vesicles occur in five phyla of the Bacteria and two groups of the Archaea, but they are mostly restricted to planktonic microorganisms, in which they provide buoyancy. By regulating their relative gas vesicle content aquatic microbes are able to perform vertical migrations. In slowly growing organisms such movements are made more efficiently than by swimming with flagella. The gas vesicle is impermeable to liquid water, but it is highly permeable to gases and is normally filled with air. It is a rigid structure of low compressibility, but it collapses flat under a certain critical pressure and buoyancy is then lost. Gas vesicles in different organisms vary in width, from 45 to > 200 nm; in accordance with engineering principles the narrower ones are stronger (have higher critical pressures) than wide ones, but they contain less gas space per wall volume and are therefore less efficient at providing buoyancy. A survey of gas-vacuolate cyanobacteria reveals that there has been natural selection for gas vesicles of the maximum width permitted by the pressure encountered in the natural environment, which is mainly determined by cell turgor pressure and water depth. Gas vesicle width is genetically determined, perhaps through the amino acid sequence of one of the constituent proteins. Up to 14 genes have been implicated in gas vesicle production, but so far the products of only two have been shown to be present in the gas vesicle: GvpA makes the ribs that form the structure, and GvpC binds to the outside of the ribs and stiffens the structure against collapse. The evolution of the gas vesicle is discussed in relation to the homologies of these proteins. Images PMID:8177173

  2. Methanation process utilizing split cold gas recycle

    DOEpatents

    Tajbl, Daniel G.; Lee, Bernard S.; Schora, Jr., Frank C.; Lam, Henry W.

    1976-07-06

    In the methanation of feed gas comprising carbon monoxide and hydrogen in multiple stages, the feed gas, cold recycle gas and hot product gas is mixed in such proportions that the mixture is at a temperature sufficiently high to avoid carbonyl formation and to initiate the reaction and, so that upon complete reaction of the carbon monoxide and hydrogen, an excessive adiabatic temperature will not be reached. Catalyst damage by high or low temperatures is thereby avoided with a process that utilizes extraordinarily low recycle ratios and a minimum of investment in operating costs.

  3. Gas separating

    DOEpatents

    Gollan, A.

    1988-03-29

    Feed gas is directed tangentially along the non-skin surface of gas separation membrane modules comprising a cylindrical bundle of parallel contiguous hollow fibers supported to allow feed gas to flow from an inlet at one end of a cylindrical housing through the bores of the bundled fibers to an outlet at the other end while a component of the feed gas permeates through the fibers, each having the skin side on the outside, through a permeate outlet in the cylindrical casing. 3 figs.

  4. Gas Chromatograph.

    DTIC Science & Technology

    Patents, * Gas chromotography , *Hydrocarbons, *Carbon monoxide, *Carbon dioxide, *Water, Field equipment, Portable equipment, Sensitivity, Halogenated hydrocarbons, Test methods, Gases, Liquids, Purity

  5. Gas magnetometer

    SciTech Connect

    Walker, Thad Gilbert; Lancor, Brian Robert; Wyllie, Robert

    2016-05-03

    Measurement of a precessional rate of a gas, such as an alkali gas, in a magnetic field is made by promoting a non-uniform precession of the gas in which substantially no net magnetic field affects the gas during a majority of the precession cycle. This allows sensitive gases that would be subject to spin-exchange collision de-phasing to be effectively used for extremely sensitive measurements in the presence of an environmental magnetic field such as the Earth's magnetic field.

  6. Gas separating

    DOEpatents

    Gollan, A.Z.

    1990-12-25

    Feed gas is directed tangentially along the non-skin surface of gas separation membrane modules comprising a cylindrical bundle of parallel contiguous hollow fibers supported to allow feed gas to flow from an inlet at one end of a cylindrical housing through the bores of the bundled fibers to an outlet at the other end while a component of the feed gas permeates through the fibers, each having the skin side on the outside, through a permeate outlet in the cylindrical casing. 3 figs.

  7. Fixed target flammable gas upgrades

    SciTech Connect

    Schmitt, R.; Squires, B.; Gasteyer, T.; Richardson, R.

    1996-12-01

    In the past, fixed target flammable gas systems were not supported in an organized fashion. The Research Division, Mechanical Support Department began to support these gas systems for the 1995 run. This technical memo describes the new approach being used to supply chamber gasses to fixed target experiments at Fermilab. It describes the engineering design features, system safety, system documentation and performance results. Gas mixtures provide the medium for electron detection in proportional and drift chambers. Usually a mixture of a noble gas and a polyatomic quenching gas is used. Sometimes a small amount of electronegative gas is added as well. The mixture required is a function of the specific chamber design, including working voltage, gain requirements, high rate capability, aging and others. For the 1995 fixed target run all the experiments requested once through gas systems. We obtained a summary of problems from the 1990 fixed target run and made a summary of the operations logbook entries from the 1991 run. These summaries primarily include problems involving flammable gas alarms, but also include incidents where Operations was involved or informed. Usually contamination issues were dealt with by the experimenters. The summaries are attached. We discussed past operational issues with the experimenters involved. There were numerous incidents of drift chamber failure where contaminated gas was suspect. However analyses of the gas at the time usually did not show any particular problems. This could have been because the analysis did not look for the troublesome component, the contaminant was concentrated in the gas over the liquid and vented before the sample was taken, or that contaminants were drawn into the chambers directly through leaks or sub-atmospheric pressures. After some study we were unable to determine specific causes of past contamination problems, although in argon-ethane systems the problems were due to the ethane only.

  8. Gas turbine engine fuel control

    NASA Technical Reports Server (NTRS)

    Gold, H. S. (Inventor)

    1973-01-01

    A variable orifice system is described that is responsive to compressor inlet pressure and temperature, compressor discharge pressure and rotational speed of a gas-turbine engine. It is incorporated into a hydraulic circuit that includes a zero gradient pump driven at a speed proportional to the speed of the engine. The resulting system provides control of fuel rate for starting, steady running, acceleration and deceleration under varying altitudes and flight speeds.

  9. Gas Chromatography.

    ERIC Educational Resources Information Center

    Karasek, Francis W.; And Others

    1984-01-01

    This review covers fundamental developments in gas chromatography during 1982 and 1983. Literature is considered under these headings: columns; liguid phases; solid supports; sorption processes and solvents; open tubular column gas chromatography; instrumentation; high-resolution columns and applications; other techniques; qualitative and…

  10. Nitrogen yield advantage from grass-legume mixtures is robust over a wide range of legume proportions and environmental conditions.

    PubMed

    Suter, Matthias; Connolly, John; Finn, John A; Loges, Ralf; Kirwan, Laura; Sebastià, Maria-Teresa; Lüscher, Andreas

    2015-06-01

    Current challenges to global food security require sustainable intensification of agriculture through initiatives that include more efficient use of nitrogen (N), increased protein self-sufficiency through homegrown crops, and reduced N losses to the environment. Such challenges were addressed in a continental-scale field experiment conducted over 3 years, in which the amount of total nitrogen yield (Ntot ) and the gain of N yield in mixtures as compared to grass monocultures (Ngainmix ) was quantified from four-species grass-legume stands with greatly varying legume proportions. Stands consisted of monocultures and mixtures of two N2 -fixing legumes and two nonfixing grasses. The amount of Ntot of mixtures was significantly greater (P ≤ 0.05) than that of grass monocultures at the majority of evaluated sites in all 3 years. Ntot and thus Ngainmix increased with increasing legume proportion up to one-third of legumes. With higher legume percentages, Ntot and Ngainmix did not continue to increase. Thus, across sites and years, mixtures with one-third proportion of legumes attained ~95% of the maximum Ntot acquired by any stand and had 57% higher Ntot than grass monocultures. Realized legume proportion in stands and the relative N gain in mixture (Ngainmix /Ntot in mixture) were most severely impaired by minimum site temperature (R = 0.70, P = 0.003 for legume proportion; R = 0.64, P = 0.010 for Ngainmix /Ntot in mixture). Nevertheless, the relative N gain in mixture was not correlated to site productivity (P = 0.500), suggesting that, within climatic restrictions, balanced grass-legume mixtures can benefit from comparable relative gains in N yield across largely differing productivity levels. We conclude that the use of grass-legume mixtures can substantially contribute to resource-efficient agricultural grassland systems over a wide range of productivity levels, implying important savings in N fertilizers and thus greenhouse gas emissions and a

  11. Influence of Proportional Number Relationships on Item Accessibility and Students' Strategies

    ERIC Educational Resources Information Center

    Carney, Michele B.; Smith, Everett; Hughes, Gwyneth R.; Brendefur, Jonathan L.; Crawford, Angela

    2016-01-01

    Proportional reasoning is important to students' future success in mathematics and science endeavors. More specifically, students' fluent and flexible use of scalar and functional relationships to solve problems is critical to their ability to reason proportionally. The purpose of this study is to investigate the influence of systematically…

  12. Improved Margin of Error Estimates for Proportions in Business: An Educational Example

    ERIC Educational Resources Information Center

    Arzumanyan, George; Halcoussis, Dennis; Phillips, G. Michael

    2015-01-01

    This paper presents the Agresti & Coull "Adjusted Wald" method for computing confidence intervals and margins of error for common proportion estimates. The presented method is easily implementable by business students and practitioners and provides more accurate estimates of proportions particularly in extreme samples and small…

  13. A Cross-Disciplinary Approach to Teaching Data Literacy and Proportionality

    ERIC Educational Resources Information Center

    Vahey, Philip; Rafanan, Ken; Patton, Charles; Swan, Karen; van't Hooft, Mark; Kratcoski, Annette; Stanford, Tina

    2012-01-01

    The Thinking with Data project (TWD) expands on current notions of data literacy by (1) focusing on proportional reasoning as key to data literacy and (2) leveraging the non-mathematics disciplines to engage students in deep thinking about the context of data and the application of proportionality. A set of four 2-week, sequential modules for…

  14. Promoting Middle School Students' Proportional Reasoning Skills through an Ongoing Professional Development Programme for Teachers

    ERIC Educational Resources Information Center

    Hilton, Annette; Hilton, Geoff; Dole, Shelley; Goos, Merrilyn

    2016-01-01

    Proportional reasoning, the ability to use ratios in situations involving comparison of quantities, is essential for mathematical competence, especially in the middle school years, and is an important determinant of success beyond school. Research shows students find proportional reasoning and its foundational concepts difficult. Proportional…

  15. Second-Year Pre-Service Teachers' Responses to Proportional Reasoning Test Items

    ERIC Educational Resources Information Center

    Livy, Sharyn; Herbert, Sandra

    2013-01-01

    A recent international study of pre-service teachers identified that proportional reasoning was problematic for pre-service teachers. Proportional reasoning is an important topic in the middle years of schooling and therefore it is critical that teachers understand this topic and can rely on their Mathematical Content Knowledge (MCK) when…

  16. Not Everything Is Proportional: Effects of Age and Problem Type on Propensities for Overgeneralization

    ERIC Educational Resources Information Center

    Van Dooren, Wim; De Bock, Dirk; Hessels, An; Janssens, Dirk; Verschaffel, Lieven

    2005-01-01

    Previous research (e.g., De Bock, 2002) has shown that--due to the extensive attention paid to proportional reasoning in elementary and secondary mathematics education--many students tend to overrely on proportional methods in diverse domains of mathematics (e.g., geometry, probability). We investigated the development of misapplication of…

  17. Measuring Children's Proportional Reasoning, The "Tendency" for an Additive Strategy and The Effect of Models

    ERIC Educational Resources Information Center

    Misailadou, Christina; Williams, Julian

    2003-01-01

    We report a study of 10-14 year old children's use of additive strategies while solving ratio and proportion tasks. Rasch methodology was used to develop a diagnostic instrument that reveals children's misconceptions. Two versions of this instrument, one with "models" thought to facilitate proportional reasoning and one without were…

  18. The Contribution of Domain-Specific Knowledge in Predicting Students' Proportional Word Problem Solving Performance

    ERIC Educational Resources Information Center

    Jitendra, Asha K.; Lein, Amy E.; Star, Jon R.; Dupuis, Danielle N.

    2013-01-01

    Proportional thinking, which requires understanding fractions, ratios, and proportions, is an area of mathematics that is cognitively challenging for many children and adolescents (Fujimura, 2001; Lamon, 2007; Lobato, Ellis, Charles, & Zbiek, 2010; National Mathematics Advisory Panel [NMAP], 2008) and "transcends topical barriers in adult…

  19. The recursive maximum likelihood proportion estimator: User's guide and test results

    NASA Technical Reports Server (NTRS)

    Vanrooy, D. L.

    1976-01-01

    Implementation of the recursive maximum likelihood proportion estimator is described. A user's guide to programs as they currently exist on the IBM 360/67 at LARS, Purdue is included, and test results on LANDSAT data are described. On Hill County data, the algorithm yields results comparable to the standard maximum likelihood proportion estimator.

  20. Make Your Own Paint Chart: A Realistic Context for Developing Proportional Reasoning with Ratios

    ERIC Educational Resources Information Center

    Beswick, Kim

    2011-01-01

    Proportional reasoning has been recognised as a crucial focus of mathematics in the middle years and also as a frequent source of difficulty for students (Lamon, 2007). Proportional reasoning concerns the equivalence of pairs of quantities that are related multiplicatively; that is, equivalent ratios including those expressed as fractions and…

  1. Calculation of accurate channel spacing of an AWG optical demultiplexer applying proportional method

    NASA Astrophysics Data System (ADS)

    Seyringer, D.; Hodzic, E.

    2015-06-01

    We present the proportional method to correct the channel spacing between the transmitted output channels of an AWG. The developed proportional method was applied to 64-channel, 50 GHz AWG and the achieved results confirm very good correlation between designed channel spacing (50 GHz) and the channel spacing calculated from simulated AWG transmission characteristics.

  2. Child Proportional Scaling: Is 1/3 = 2/6 = 3/9 = 4/12?

    ERIC Educational Resources Information Center

    Boyer, Ty W.; Levine, Susan C.

    2012-01-01

    The current experiments examined the role of scale factor in children's proportional reasoning. Experiment 1 used a choice task and Experiment 2 used a production task to examine the abilities of kindergartners through fourth-graders to match equivalent, visually depicted proportional relations. The findings of both experiments show that accuracy…

  3. Research Findings' Impact on the Representation of Proportional Reasoning in Swedish Mathematics Textbooks

    ERIC Educational Resources Information Center

    Ahl, Linda Marie

    2016-01-01

    This article investigates the impact of research findings on the representation of proportional reasoning in two commonly used Swedish mathematics textbook series for grades 7-9. A research-based framework that identifies five learning goals for understanding of proportional reasoning was used to analyse the textbooks. The results brought to…

  4. Balancing proportions of competing omega-3 and omega-6 highly unsaturated fatty acids (HUFA) in tissue lipids.

    PubMed

    Bibus, Doug; Lands, Bill

    2015-08-01

    People eating different balances of omega-3 and omega-6 nutrients develop predictably different proportions of competing highly unsaturated fatty acids (HUFA) in their tissue lipids. While epidemiological studies have associated wide differences in HUFA balance with disease severity, some clinical studies that did not examine wide differences failed to confirm the association. We examined the degree to which the relative amount of arachidonic acid, the major precursor of omega-6 eicosanoids, differs among people who have widely different dietary intakes of omega-3 and omega-6 nutrients. Gas chromatographic analyses of human blood samples describe the balance among n-3 and n-6 HUFA for different individuals. The proportion of the omega-6 arachidonic acid, from which potent eicosanoids are formed, is not constant. It ranges from 30% to 70% of HUFA while the competing n-3 HUFA range from 60% to 10% of HUFA. Significant differences in clinical outcomes between control and intervention groups have been seen when using dietary interventions that shift the balance of n-3 and n-6 nutrients far enough to create a biologically significant difference in the HUFA balance.

  5. Gas Chromatography.

    ERIC Educational Resources Information Center

    Cram, Stuart P.; And Others

    1980-01-01

    Selects fundamental developments in theory, methodology, and instrumentation in gas chromatography (GC). A special section reviews GC in the People's Republic of China. Over 1,000 references are cited. (CS)

  6. Volcanic Gas

    MedlinePlus

    ... Hazards Tephra/Ash Lava Flows Lahars Volcanic Gas Climate Change Pyroclastic Flows Volcanic Landslides Preparedness Volcano Hazard Zones ... Please see our discussion of volcanic gases and climate change for additional information. Hydrogen sulfide (H 2 S) is ...

  7. Gas exchange

    MedlinePlus Videos and Cool Tools

    ... during exhalation. Gas exchange is the delivery of oxygen from the lungs to the bloodstream, and the ... share a membrane with the capillaries in which oxygen and carbon dioxide move freely between the respiratory ...

  8. Confidence interval construction for proportion ratio in paired studies based on hybrid method.

    PubMed

    Tang, Man-Lai; Li, Hui-Qiong; Tang, Nian-Sheng

    2012-08-01

    In this article, we consider confidence interval construction for proportion ratio in paired samples. Previous studies usually reported that score-based confidence intervals consistently outperformed other asymptotic confidence intervals for correlated proportion difference and ratio. However, score-based confidence intervals may not possess closed-form solutions and iterative procedures are therefore required. This article investigates the problem of confidence interval construction for ratio of two correlated proportions based on a hybrid method. Briefly, the hybrid method simply combines two separate confidence intervals for two individual proportions to produce a hybrid confidence interval for the ratio of the two individual proportions in paired studies. Most importantly, confidence intervals based on this hybrid method possess explicit solutions. Our simulation studies indicate that hybrid Wilson score confidence intervals based on Fieller's theorem performs well. The proposed confidence intervals will be illustrated with three real examples.

  9. Assessment of Crack Path Prediction in Non-Proportional Mixed-Mode Fatigue

    NASA Technical Reports Server (NTRS)

    Highsmith, Shelby, Jr.; Johnson, Steve; Swanson, Gregory; Sayyah, Tarek; Pettit, Richard

    2008-01-01

    Non-proportional mixed-mode loading is present in many systems and a growing crack can experience any manner of mixed-mode loading. Prediction of the resulting crack path is important when assessing potential failure modes or when performing a failure investigation. Current crack path selection criteria are presented along with data for Inconel 718 under non-proportional mixed-mode loading. Mixed-mode crack growth can transition between path deflection mechanisms with very different orientations. Non-proportional fatigue loadings lack a single parameter for input to current crack path criteria. Crack growth transitions were observed in proportional and non-proportional FCG tests. Different paths displayed distinct fracture surface morphologies. New crack path drivers & transition criteria must be developed.

  10. [Anthropometric characteristic of body proportionality in the residents of the city of Krasnoyarsk].

    PubMed

    Derevtsova, S N

    2010-01-01

    The purpose of the present investigation was to evaluate body proportionality in 417 men and 642 women of the different age groups: juvenile, I and II periods of mature age, and elderly age, living in the city of Krasnoyarsk. Anthropometric studies were conducted with the determination of longitudinal and width dimensions of the body. The significant differences between the proportionality parameters were detected in men. Young men were tall, had narrow shoulders and pelvis, their trunk had rectangular shape. Hands were proportional to the body length, the torso and legs were elongated. Mature and aged men were of medium height, had wide pelvis and trapezoid-shaped trunk. Both torso and legs were proportional to to the body length. No statistically significant differences between the parameters, defining the body proportions, were found in the women of different age groups. The correlation coefficients were determined between the body length and the parameters characterizing longitudinal and transverse sizes of the body of the individuals examined.

  11. Gas Jets

    NASA Technical Reports Server (NTRS)

    Chaplygin, S.

    1944-01-01

    A brief summary of the contents of this paper is presented here. In part I the differential equations of the problem of a gas flow in two dimensions is derived and the particular integrals by which the problem on jets is solved are given. Use is made of the same independent variables as Molenbroek used, but it is found to be more suitable to consider other functions. The stream function and velocity potential corresponding to the problem are given in the form of series. The investigation on the convergence of these series in connection with certain properties of the functions entering them forms the subject of part II. In part III the problem of the outflow of a gas from an infinite vessel with plane walls is solved. In part IV the impact of a gas jet on a plate is considered and the limiting case where the jet expands to infinity changing into a gas flow is taken up in more detail. This also solved the equivalent problem of the resistance of a gaseous medium to the motion of a plate. Finally, in part V, an approximate method is presented that permits a simpler solution of the problem of jet flows in the case where the velocities of the gas (velocities of the particles in the gas) are not very large.

  12. Proportional-integral and proportional-integral-derivative-based cyclic sleep controllers with anti-windup technique for energy-efficient and delay-aware passive optical networks

    NASA Astrophysics Data System (ADS)

    Kikuchi, Takahiro; Kubo, Ryogo

    2016-08-01

    In energy-efficient passive optical network (PON) systems, the increase in the queuing delays caused by the power-saving mechanism of optical network units (ONUs) is an important issue. Some researchers have proposed quality-of-service (QoS)-aware ONU cyclic sleep controllers in PON systems. We have proposed proportional (P) and proportional-derivative (PD)-based controllers to maintain the average queuing delay at a constant level regardless of the amount of downstream traffic. However, sufficient performance has not been obtained because of the sleep period limitation. In this paper, proportional-integral (PI) and proportional-integral-derivative (PID)-based controllers considering the sleep period limitation, i.e., using an anti-windup (AW) technique, are proposed to improve both the QoS and power-saving performance. Simulations confirm that the proposed controllers provide better performance than conventional controllers in terms of the average downstream queuing delay and the time occupancy of ONU active periods.

  13. A comparison of several methods for the confidence intervals of negative binomial proportions

    NASA Astrophysics Data System (ADS)

    Thong, Alfred Lim Sheng; Shan, Fam Pei

    2015-12-01

    This study focuses on the comparison of the performances of several approaches in constructing confidence interval of negative binomial proportions (single negative binomial proportion and the difference between two negative binomial proportions). After that, the strengths and weaknesses of the approaches in constructing confidence interval of negative binomial proportions are figured out. Performances of the approaches will be accessed by comparing their coverage probabilities and average lengths of confidence intervals. For the comparison of the performances of the approaches in single negative binomial proportion, Wald confidence interval (WCI-I), Agresti confidence interval (ACI-I), Wilson's Score confidence interval (WSCI-I) and Jeffrey confidence interval (JCI-I) are used. WSCI-I is the better approach for single negative binomial proportion in term of the average length of confidence intervals and average coverage probability. While for the comparison of the performances of the approaches in the difference between two negative binomial proportions, Wald confidence interval (WCI-II), Agresti confidence interval (ACI-II), Newcombe's Score confidence interval (NSCI-II), Jeffrey confidence interval (JCI-II) and Yule confidence interval (YCI-II) are used. Under different situations, a better approach has been discussed and recommended. There will be different approach that performs better for the coverage probability.

  14. Proportional reasoning and the linguistic abilities required for hypothetico-deductive reasoning

    NASA Astrophysics Data System (ADS)

    Lawson, Anton E.; Lawson, David I.; Lawson, Chester A.

    The hypothesis is advanced that a necessary, though not sufficient, condition for the acquisition of proportional reasoning during adolescence is the prior internalization of key linguistic elements of argumentation, essentially those used in hypothetico-deductive reasoning. This hypothesized internalization, which does not occur in all individuals, results in some who have acquired the ability to reflect upon the correctness of self-generated answers in a hypothetico-deductive manner, and others who have not. As an initial test of the hypothesis, 46 subjects (Ss) (mean age = 21.03 years) were classified into additive, transitional, or proportional reasoning categories based upon responses to a proportions task. Group differences were found in which proportional Ss performed better than transitional Ss who in turn performed better than additive Ss on a number of items testing Ss' abilities to identify, generate, and use the linguistic elements of argumentation. Further it was found that some Ss who were successful on the linguistic items failed the proportions task, but no Ss who were successful on the proportions task failed the linguistic items. This result supports the hypothesis that the internalization of linguistic elements of argumentation is a prerequisite for proportional reasoning and by inference other advanced reasoning schemata as well. Implications for science instruction are drawn.

  15. Should fatty acid signature proportions sum to 1 for diet estimation?

    USGS Publications Warehouse

    Bromaghin, Jeffrey; Budge, Suzanne M.; Thiemann, Gregory W.

    2016-01-01

    Knowledge of predator diets, including how diets might change through time or differ among predators, provides essential insights into their ecology. Diet estimation therefore remains an active area of research within quantitative ecology. Quantitative fatty acid signature analysis (QFASA) is an increasingly common method of diet estimation. QFASA is based on a data library of prey signatures, which are vectors of proportions summarizing the fatty acid composition of lipids, and diet is estimated as the mixture of prey signatures that most closely approximates a predator’s signature. Diets are typically estimated using proportions from a subset of all fatty acids that are known to be solely or largely influenced by diet. Given the subset of fatty acids selected, the current practice is to scale their proportions to sum to 1.0. However, scaling signature proportions has the potential to distort the structural relationships within a prey library and between predators and prey. To investigate that possibility, we compared the practice of scaling proportions with two alternatives and found that the traditional scaling can meaningfully bias diet estimators under some conditions. Two aspects of the prey types that contributed to a predator’s diet influenced the magnitude of the bias: the degree to which the sums of unscaled proportions differed among prey types and the identifiability of prey types within the prey library. We caution investigators against the routine scaling of signature proportions in QFASA.

  16. Hybrid Resource Allocation Scheme with Proportional Fairness in OFDMA-Based Cognitive Radio Systems

    NASA Astrophysics Data System (ADS)

    Li, Li; Xu, Changqing; Fan, Pingzhi; He, Jian

    In this paper, the resource allocation problem for proportional fairness in hybrid Cognitive Radio (CR) systems is studied. In OFDMA-based CR systems, traditional resource allocation algorithms can not guarantee proportional rates among CR users (CRU) in each OFDM symbol because the number of available subchannels might be smaller than that of CRUs in some OFDM symbols. To deal with this time-varying nature of available spectrum resource, a hybrid CR scheme in which CRUs are allowed to use subchannels in both spectrum holes and primary users (PU) bands is adopted and a resource allocation algorithm is proposed to guarantee proportional rates among CRUs with no undue interference to PUs.

  17. Design and performance of A 3He-free coincidence counter based on parallel plate boron-lined proportional technology

    SciTech Connect

    Henzlova, D.; Menlove, H. O.; Marlow, J. B.

    2015-07-01

    Thermal neutron counters utilized and developed for deployment as non-destructive assay (NDA) instruments in the field of nuclear safeguards traditionally rely on 3He-based proportional counting systems. 3He-based proportional counters have provided core NDA detection capabilities for several decades and have proven to be extremely reliable with range of features highly desirable for nuclear facility deployment. Facing the current depletion of 3He gas supply and the continuing uncertainty of options for future resupply, a search for detection technologies that could provide feasible short-term alternative to 3He gas was initiated worldwide. As part of this effort, Los Alamos National Laboratory (LANL) designed and built a 3He-free full scale thermal neutron coincidence counter based on boron-lined proportional technology. The boronlined technology was selected in a comprehensive inter-comparison exercise based on its favorable performance against safeguards specific parameters. This paper provides an overview of the design and initial performance evaluation of the prototype High Level Neutron counter – Boron (HLNB). The initial results suggest that current HLNB design is capable to provide ~80% performance of a selected reference 3He-based coincidence counter (High Level Neutron Coincidence Counter, HLNCC). Similar samples are expected to be measurable in both systems, however, slightly longer measurement times may be anticipated for large samples in HLNB. The initial evaluation helped to identify potential for further performance improvements via additional tailoring of boron-layer thickness.

  18. Gas Analyzer

    NASA Technical Reports Server (NTRS)

    1983-01-01

    A miniature gas chromatograph, a system which separates a gaseous mixture into its components and measures the concentration of the individual gases, was designed for the Viking Lander. The technology was further developed under National Institute for Occupational Safety and Health (NIOSH) and funded by Ames Research Center/Stanford as a toxic gas leak detection device. Three researchers on the project later formed Microsensor Technology, Inc. to commercialize the product. It is a battery-powered system consisting of a sensing wand connected to a computerized analyzer. Marketed as the Michromonitor 500, it has a wide range of applications.

  19. Using Photographic Images to Enhance Conceptual Development in Situations of Proportion

    ERIC Educational Resources Information Center

    Hilton, Annette; Hilton, Geoff; Dole, Shelley; Goos, Merrilyn

    2015-01-01

    Find out how to use photographic images to support the conceptual development of proportional thinking. This paper provides insight into a sequenced activity that promotes student engagement and makes links to familiar and unfamiliar contexts.

  20. General multiyear aggregation technology: Methodology and software documentation. [estimating seasonal crop acreage proportions

    NASA Technical Reports Server (NTRS)

    Baker, T. C. (Principal Investigator)

    1982-01-01

    A general methodology is presented for estimating a stratum's at-harvest crop acreage proportion for a given crop year (target year) from the crop's estimated acreage proportion for sample segments from within the stratum. Sample segments from crop years other than the target year are (usually) required for use in conjunction with those from the target year. In addition, the stratum's (identifiable) crop acreage proportion may be estimated for times other than at-harvest in some situations. A by-product of the procedure is a methodology for estimating the change in the stratum's at-harvest crop acreage proportion from crop year to crop year. An implementation of the proposed procedure as a statistical analysis system routine using the system's matrix language module, PROC MATRIX, is described and documented. Three examples illustrating use of the methodology and algorithm are provided.

  1. Equality of Shapley value and fair proportion index in phylogenetic trees.

    PubMed

    Fuchs, Michael; Jin, Emma Yu

    2015-11-01

    The Shapley value and the fair proportion index of phylogenetic trees have been introduced recently for the purpose of making conservation decisions in genetics. Moreover, also very recently, Hartmann (J Math Biol 67:1163-1170, 2013) has presented data which shows that there is a strong correlation between a slightly modified version of the Shapley value (which we call the modified Shapley value) and the fair proportion index. He gave an explanation of this correlation by showing that the contribution of both indices to an edge of the tree becomes identical as the number of taxa tends to infinity. In this note, we show that the Shapley value and the fair proportion index are in fact the same. Moreover, we also consider the modified Shapley value and show that its covariance with the fair proportion index in random phylogenetic trees under the Yule-Harding model and uniform model is indeed close to one.

  2. Influence of proportional number relationships on item accessibility and students' strategies

    NASA Astrophysics Data System (ADS)

    Carney, Michele B.; Smith, Everett; Hughes, Gwyneth R.; Brendefur, Jonathan L.; Crawford, Angela

    2016-12-01

    Proportional reasoning is important to students' future success in mathematics and science endeavors. More specifically, students' fluent and flexible use of scalar and functional relationships to solve problems is critical to their ability to reason proportionally. The purpose of this study is to investigate the influence of systematically manipulating the location of an integer multiplier—to press the scalar or functional relationship—on item difficulty and student solution strategies. We administered short-answer assessment forms to 473 students in grades 6-8 (approximate ages 11-14) and analyzed the data quantitatively with the Rasch model to examine item accessibility and qualitatively to examine student solution strategies. We found that manipulating the location of the integer multiplier encouraged students to make use of different aspects of proportional relationships without decreasing item accessibility. Implications for proportional reasoning curricular materials, instruction, and assessment are addressed.

  3. Ethnicity, education, and the non-proportional hazard of first marriage in Turkey.

    PubMed

    Gore, DeAnna L; Carlson, Elwood

    2010-07-01

    This study uses the 1998 Turkish Demographic and Health Survey to estimate non-proportional piecewise-constant hazards for first marriage among women in Turkey by education and ethnicity, with controls for region of residence and rural-urban migration. At low education levels Kurdish speakers married earlier than women who spoke Turkish or other languages, but at high education levels Kurdish women delayed marriage more than other women. This reversal across education groups furnishes a new illustration of the minority-group-status hypothesis specifically focused on marriage as the first step in the family formation process. The ethnic contrast concerned only marriage timing in Turkey, not proportions ever marrying. Eventual marriage remained nearly universal for all groups of women. This means that an assumption of proportional duration hazards (widespread in contemporary research) across the whole range of marriage-forming ages should be replaced by models with non-proportional duration hazards.

  4. Secondary electron background produced by heavy nuclei in a multiwire proportional counter hodoscope

    NASA Technical Reports Server (NTRS)

    Morgan, S. H., Jr.; Watts, J. W., Jr.; Schwille, H.; Pollvogt, U.

    1974-01-01

    The secondary electron background produced by heavy nuclei in a multiwire proportional counter hodoscope is calculated using both a simplified and a more complete Monte Carlo model. These results are compared with experimental data from a small multiwire proportional counter hodoscope operated in a 530 MeV/nucleon accelerator beam of nitrogen nuclei. Estimates of the secondary electron background produced by heavy relativistic nuclei are presented along with the detailed results from calculations of energy deposition in the hodoscope counter cells.

  5. The power-proportion method for intracranial volume correction in volumetric imaging analysis.

    PubMed

    Liu, Dawei; Johnson, Hans J; Long, Jeffrey D; Magnotta, Vincent A; Paulsen, Jane S

    2014-01-01

    In volumetric brain imaging analysis, volumes of brain structures are typically assumed to be proportional or linearly related to intracranial volume (ICV). However, evidence abounds that many brain structures have power law relationships with ICV. To take this relationship into account in volumetric imaging analysis, we propose a power law based method-the power-proportion method-for ICV correction. The performance of the new method is demonstrated using data from the PREDICT-HD study.

  6. Estimation of Sensitive Proportion by Randomized Response Data in Successive Sampling

    PubMed Central

    Tian, Jiayong

    2015-01-01

    This paper considers the problem of estimation for binomial proportions of sensitive or stigmatizing attributes in the population of interest. Randomized response techniques are suggested for protecting the privacy of respondents and reducing the response bias while eliciting information on sensitive attributes. In many sensitive question surveys, the same population is often sampled repeatedly on each occasion. In this paper, we apply successive sampling scheme to improve the estimation of the sensitive proportion on current occasion. PMID:26089958

  7. The Chimera of Proportionality: Institutionalising Limits on Punishment in Contemporary Social and Political Systems

    PubMed Central

    Lacey, Nicola; Pickard, Hanna

    2015-01-01

    The concept of proportionality has been central to the retributive revival in penal theory, and underlies desert theory’s normative and practical commitment to limiting punishment. Theories of punishment combining desert-based and consequentialist considerations also appeal to proportionality as a limiting condition. In this paper we argue that these claims are founded on an exaggerated idea of what proportionality can offer, and in particular fail properly to consider the institutional conditions needed to foster robust limits on the state’s power to punish. The idea that appeals to proportionality as an abstract ideal can help to limit punishment is, we argue, a chimera: what has been thought of as proportionality is not a naturally existing relationship, but a product of political and social construction, cultural meaning-making, and institution-building. Drawing on evolutionary psychology and comparative political economy, we argue that philosophers and social scientists need to work together to understand how the appeal of the idea of proportionality can best be realised through substantive institutional frameworks under particular conditions. PMID:25937675

  8. Fatigue characteristics and microcosmic mechanism of Al-Si-Mg alloys under multiaxial proportional loadings

    NASA Astrophysics Data System (ADS)

    Jiang, Xiao-Song; He, Guo-Qiu; Liu, Bing; Zhu, Zheng-Yu; Zhang, Wei-Hua

    2011-08-01

    With the increasing use of Al-Si-Mg alloys in the automotive industry, the fatigue performance of Al-Si-Mg alloy has become a major concern with regard to their reliability. The fatigue characteristics and microcosmic mechanism of an Al-Si-Mg alloy under multiaxial proportional loadings were investigated in this research. As low cycle fatigue life and material strengthening behavior are closely related, the effect of equivalent strain amplitude on the multiaxial fatigue properties was analyzed. Fatigue tests were conducted to determine the influence of equivalent strain amplitude on the multiaxial proportional fatigue properties. The fatigue life exhibits a stable behavior under multiaxial proportional loadings. The dislocation structures of the Al-Si-Mg alloy were observed by transmission electron microscopy (TEM). The dislocation structure evolution of the Al-Si-Mg alloy under multiaxial proportional loadings during low cycle fatigue develops step by step by increasing fatigue cycles. Simultaneously, the dislocation structure changes with the change in equivalent strain amplitude under multiaxial proportional loadings. The experimental evidence indicates that the multiaxial fatigue behavior and life are strongly dependent on the microstructure of the material, which is caused by multiaxial proportional loadings.

  9. The Chimera of Proportionality: Institutionalising Limits on Punishment in Contemporary Social and Political Systems.

    PubMed

    Lacey, Nicola; Pickard, Hanna

    2015-03-01

    The concept of proportionality has been central to the retributive revival in penal theory, and underlies desert theory's normative and practical commitment to limiting punishment. Theories of punishment combining desert-based and consequentialist considerations also appeal to proportionality as a limiting condition. In this paper we argue that these claims are founded on an exaggerated idea of what proportionality can offer, and in particular fail properly to consider the institutional conditions needed to foster robust limits on the state's power to punish. The idea that appeals to proportionality as an abstract ideal can help to limit punishment is, we argue, a chimera: what has been thought of as proportionality is not a naturally existing relationship, but a product of political and social construction, cultural meaning-making, and institution-building. Drawing on evolutionary psychology and comparative political economy, we argue that philosophers and social scientists need to work together to understand how the appeal of the idea of proportionality can best be realised through substantive institutional frameworks under particular conditions.

  10. Cell types differ in global coordination of splicing and proportion of highly expressed genes

    PubMed Central

    Trakhtenberg, Ephraim F.; Pho, Nam; Holton, Kristina M.; Chittenden, Thomas W.; Goldberg, Jeffrey L.; Dong, Lingsheng

    2016-01-01

    Balance in the transcriptome is regulated by coordinated synthesis and degradation of RNA molecules. Here we investigated whether mammalian cell types intrinsically differ in global coordination of gene splicing and expression levels. We analyzed RNA-seq transcriptome profiles of 8 different purified mouse cell types. We found that different cell types vary in proportion of highly expressed genes and the number of alternatively spliced transcripts expressed per gene, and that the cell types that express more variants of alternatively spliced transcripts per gene are those that have higher proportion of highly expressed genes. Cell types segregated into two clusters based on high or low proportion of highly expressed genes. Biological functions involved in negative regulation of gene expression were enriched in the group of cell types with low proportion of highly expressed genes, and biological functions involved in regulation of transcription and RNA splicing were enriched in the group of cell types with high proportion of highly expressed genes. Our findings show that cell types differ in proportion of highly expressed genes and the number of alternatively spliced transcripts expressed per gene, which represent distinct properties of the transcriptome and may reflect intrinsic differences in global coordination of synthesis, splicing, and degradation of RNA molecules. PMID:27577089

  11. Assessing heterogeneity of treatment effect in a clinical trial with the proportional interactions model.

    PubMed

    Kovalchik, Stephanie A; Varadhan, Ravi; Weiss, Carlos O

    2013-12-10

    Understanding how individuals vary in their response to treatment is an important task of clinical research. For standard regression models, a proportional interactions model first described by Follmann and Proschan (1999) offers a powerful approach for identifying effect modification in a randomized clinical trial when multiple variables influence treatment response. In this paper, we present a framework for using the proportional interactions model in the context of a parallel-arm clinical trial with multiple prespecified candidate effect modifiers. To protect against model misspecification, we propose a selection strategy that considers all possible proportional interactions models. We develop a modified Bonferroni correction for multiple testing that accounts for the positive correlation among candidate models. We describe methods for constructing a confidence interval for the proportionality parameter. In simulation studies, we show that our modified Bonferroni adjustment controls familywise error and has greater power to detect proportional interactions compared with multiplcity-corrected subgroup analyses. We demonstrate our methodology by using the Studies of Left Ventricular Dysfunction Treatment trial, a placebo-controlled randomized clinical trial of the efficacy of enalapril to reduce the risk of death or hospitalization in chronic heart failure patients. An R package called anoint is available for implementing the proportional interactions methodology.

  12. Estimation of aquifer scale proportion using equal area grids: assessment of regional scale groundwater quality

    USGS Publications Warehouse

    Belitz, Kenneth; Jurgens, Bryant C.; Landon, Matthew K.; Fram, Miranda S.; Johnson, Tyler D.

    2010-01-01

    The proportion of an aquifer with constituent concentrations above a specified threshold (high concentrations) is taken as a nondimensional measure of regional scale water quality. If computed on the basis of area, it can be referred to as the aquifer scale proportion. A spatially unbiased estimate of aquifer scale proportion and a confidence interval for that estimate are obtained through the use of equal area grids and the binomial distribution. Traditionally, the confidence interval for a binomial proportion is computed using either the standard interval or the exact interval. Research from the statistics literature has shown that the standard interval should not be used and that the exact interval is overly conservative. On the basis of coverage probability and interval width, the Jeffreys interval is preferred. If more than one sample per cell is available, cell declustering is used to estimate the aquifer scale proportion, and Kish's design effect may be useful for estimating an effective number of samples. The binomial distribution is also used to quantify the adequacy of a grid with a given number of cells for identifying a small target, defined as a constituent that is present at high concentrations in a small proportion of the aquifer. Case studies illustrate a consistency between approaches that use one well per grid cell and many wells per cell. The methods presented in this paper provide a quantitative basis for designing a sampling program and for utilizing existing data.

  13. The influence of craniofacial to standing height proportion on perceived attractiveness.

    PubMed

    Naini, F B; Cobourne, M T; McDonald, F; Donaldson, A N A

    2008-10-01

    An idealised male image, based on Vitruvian Man, was created. The craniofacial height was altered from a proportion of 1/6 to 1/10 of standing height, creating 10 images shown in random order to 89 observers (74 lay people; 15 clinicians), who ranked the images from the most to the least attractive. The main outcome was the preference ranks of image attractiveness given by the observers. Linear regressions were used to assess what influences the choice for the most and the least attractive images, followed by a multivariate rank ordinal logistic regression to test the influence of age, gender, ethnicity and professional status of the observer. A craniofacial height to standing height proportion of 1/7.5 was perceived as the most attractive (36%), followed by a proportion of 1/8 (26%). The images chosen as most attractive by more than 10% of observers had a mean proportion of 1/7.8(min=1/7; max=1/8.5). The images perceived as most unattractive had a proportion of 1/6 and 1/10. The choice of images was not influenced by the age, gender, ethnicity or professional status of the observers. The ideal craniofacial height to standing height proportion is in the range 1/7 to 1/8.5. This finding should be considered when planning treatment to alter craniofacial or facial height.

  14. Rapid proportion comparison with spatial arrays of frequently used meaningful visual symbols.

    PubMed

    Sakuma, Naoto; Kimura, Eiji; Goryo, Ken

    2017-11-01

    It has been shown that when two arrays of Arabic numerals were briefly presented, observers could accurately indicate which array contained the larger number of a target numeral. This study investigated whether this rapid proportion comparison can be extended to other meaningful symbols that share some of notable properties of Arabic numerals. We tested mainly several Japanese Kanji letters, each of which represents a meaning and can work as a word. Using physically identical stimulus sets that could be interpreted as different types of letters, Experiment 1 first confirmed the rapid proportion comparison with Arabic numerals for Japanese participants. Experiment 2 showed that the rapid proportion comparison can be extended to Kanji numerals. Experiment 3 successfully demonstrated that rapid proportion judgments can be found with non-quantitative Kanji letters that are used frequently. Experiment 4 further demonstrated the rapid proportion comparison with frequently used meaningful non-letter symbols (gender icons). The rapid processing cannot be attributed to fluent processing of familiar items, because it was not found with familiar phonograms (Japanese Kana letters). These findings suggest that the rapid proportion comparison can be commonly found with frequently used meaningful symbols, even though their meaning is not relevant to the task.

  15. Standardisation of positron-emitters in gas with the NPL primary gas counting system.

    PubMed

    Marouli, M; Dean, J C J; Sephton, J P; Spyrou, N M

    2010-01-01

    A primary standard for positron-emitters in gas has been developed. The method involves internal gas proportional counting and the use of the PENELOPE Monte Carlo code to determine corrections for counting losses. The development work was carried out using (11)C, although the method can be applied to other positron emitters. The results were compared with measurements of (11)C (in solution) carried out using a secondary standard re-entrant ionisation chamber previously calibrated with reference to absolute counting techniques.

  16. Gas sensor

    SciTech Connect

    Schmid, Andreas K.; Mascaraque, Arantzazu; Santos, Benito; de la Figuera, Juan

    2014-09-09

    A gas sensor is described which incorporates a sensor stack comprising a first film layer of a ferromagnetic material, a spacer layer, and a second film layer of the ferromagnetic material. The first film layer is fabricated so that it exhibits a dependence of its magnetic anisotropy direction on the presence of a gas, That is, the orientation of the easy axis of magnetization will flip from out-of-plane to in-plane when the gas to be detected is present in sufficient concentration. By monitoring the change in resistance of the sensor stack when the orientation of the first layer's magnetization changes, and correlating that change with temperature one can determine both the identity and relative concentration of the detected gas. In one embodiment the stack sensor comprises a top ferromagnetic layer two mono layers thick of cobalt deposited upon a spacer layer of ruthenium, which in turn has a second layer of cobalt disposed on its other side, this second cobalt layer in contact with a programmable heater chip.

  17. The Proportion of Regulatory T Cells in Patients with Rheumatoid Arthritis: A Meta-Analysis

    PubMed Central

    Morita, Takayoshi; Shima, Yoshihito; Wing, James Badger; Sakaguchi, Shimon; Kumanogoh, Atsushi

    2016-01-01

    Background Regulatory T cells (Tregs) have important functions in peripheral immune tolerance. Dysfunction of Tregs is considered to be a pivotal cause of autoimmune diseases, including rheumatoid arthritis (RA). However, previous reports describing the proportion of Tregs among CD4+ T cells in RA patients were controversial because a range of markers are used to identify Tregs with little consensus. To clarify the status of Tregs in RA, we investigated the proportion of Tregs with focusing on the definitions of them. Methods We identified the studies reporting the proportion of Tregs in RA patients using PubMed and Google Scholar. We performed a systematic review of them and a meta-analysis to evaluate the proportion of Tregs (FOXP3-positive and/or CD25-positive) among CD4+ T cells in peripheral blood (PB) and synovial fluid (SF) of RA patients and control subjects. Results A total 31 studies were selected. The proportion of Tregs defined by all definitions among CD4+ T cells in PB was not significantly different between RA patients and control subjects (-0.65, [-1.30, 0.01]). Then we performed sub-analyses based on individual definitions. The proportion of Tregs defined by either CD25 or FOXP3 alone did not differ between RA patients and control subjects. The proportion of Tregs defined by both FOXP3 and CD25 was lower in RA patients than that in control subjects (-2.42 [-3.49, -1.34]). The proportion of Tregs defined by both FOXP3 and CD25 was higher in SF than that in PB among RA patients (3.27 [0.40, 6.14]). Conclusion The status of Tregs varied according to the definition system. The proportion of Tregs defined by stricter and functionally validated methods decreased in PB and increased in SF among RA patients. If the proportion of Tregs differs in RA, accurate and functionally relevant definitions of Tregs are necessary to elucidate their status in RA. PMID:27622457

  18. GAS SEAL

    DOEpatents

    Monson, H.; Hutter, E.

    1961-07-11

    A seal is described for a cover closing an opening in the top of a pressure vessel that may house a nuclear reactor. The seal comprises a U-shaped trough formed on the pressure vessel around the opening therein, a mass of metal in the trough, and an edge flange on the cover extending loosely into the trough and dipping into the metal mass. The lower portion of the metal mass is kept melted, and the upper portion, solid. The solid pontion of the metal mass prevents pressure surges in the vessel from expelling the liquid portion of the metal mass from the trough; the liquld portion, thus held in place by the solid portion, does not allow gas to go through, and so gas cannot escape through shrinkage holes in the solid portion.

  19. Estimating breeding proportions and testing hypotheses about costs of reproduction with capture-recapture data

    USGS Publications Warehouse

    Nichols, James D.; Hines, James E.; Pollock, Kenneth H.; Hinz, Robert L.; Link, William A.

    1994-01-01

    The proportion of animals in a population that breeds is an important determinant of population growth rate. Usual estimates of this quantity from field sampling data assume that the probability of appearing in the capture or count statistic is the same for animals that do and do not breed. A similar assumption is required by most existing methods used to test ecologically interesting hypotheses about reproductive costs using field sampling data. However, in many field sampling situations breeding and nonbreeding animals are likely to exhibit different probabilities of being seen or caught. In this paper, we propose the use of multistate capture-recapture models for these estimation and testing problems. This methodology permits a formal test of the hypothesis of equal capture/sighting probabilities for breeding and nonbreeding individuals. Two estimators of breeding proportion (and associated standard errors) are presented, one for the case of equal capture probabilities and one for the case of unequal capture probabilities. The multistate modeling framework also yields formal tests of hypotheses about reproductive costs to future reproduction or survival or both fitness components. The general methodology is illustrated using capture-recapture data on female meadow voles, Microtus pennsylvanicus. Resulting estimates of the proportion of reproductively active females showed strong seasonal variation, as expected, with low breeding proportions in midwinter. We found no evidence of reproductive costs extracted in subsequent survival or reproduction. We believe that this methodological framework has wide application to problems in animal ecology concerning breeding proportions and phenotypic reproductive costs.

  20. Effects of Varying Proportions of Glass on Reflectance Spectra of HED Polymict Breccias

    NASA Technical Reports Server (NTRS)

    Buchanan, P. C.; Reddy, V; LeCorre, L.; Cloutis, E. A.; Mann, P.; Le, L.

    2014-01-01

    Some meteorites contain significant amounts of glass, which, in most cases, probably results from impact processes on parent bodies.. Yamato 82202 is an example of one of the unequilibrated eucrites that contains significant proportions of impact glass distributed as veins throughout the meteorite. In other cases, fragments of glass are distributed throughout polymict breccias. For example, the polymict eucrite EET 87509 contains rare angular fragments of devitrified glass. Proportions of glass in most of these meteorites and in lithic clasts within these meteorites may vary locally from small amounts (less than one percent) to much larger amounts (subequal proportions of glass and mineral material). For example, some fragments within the South African polymict eucrite Macibini contain approximately 50% glass. The presence of these variable proportions of meteorite glass confirm the increased recognition that impact processes played an important role in the histories of asteroidal bodies. This study attempts to quantify the effects of a glass component on reflectance spectra by analyzing in the laboratory mixtures of varying proportions of a well-characterized HED polymict breccia and glass derived by melting a bulk sample of that breccia.

  1. The magnitude of growth hormone elevation is related with the proportion of monomeric form in acromegaly.

    PubMed

    Ochoa, R; Fonseca, E; Mercado, M; Galván, R E; Hernández, M; Zárate, A

    1995-01-01

    In acromegalic patients monomeric GH form constitutes the larger proportion of circulating GH; however, no data are available concerning the relation between total GH elevation and the predominance of GH forms. Therefore, we studied the relationship between the degree of GH elevation and the proportion of GH isoforms. Sera from 11 patients with active acromegaly were subjected to gel chromatography on Sephadex G-100 column and fractions were collected for RIA to measure GH. The monomeric form of GH was predominant and exhibited a lineal correlation (r = 0.76, p < 0.01) with the circulating GH, thus the higher elevation of GH, the major proportion of monomeric GH. IGF-1 changes correlate with changes in monomeric GH but no better than for total GH. There was a correlation observed (r = 0.65) between the proportion of low GH forms and the presence of hyperglycemia, although the physiological role of the lower molecular GH forms is still unknown. In conclusion, it was demonstrated that the relative proportion of GH molecular forms changes according to the magnitude of the elevation of total GH.

  2. Statistical inference for Hardy-Weinberg proportions in the presence of missing genotype information.

    PubMed

    Graffelman, Jan; Sánchez, Milagros; Cook, Samantha; Moreno, Victor

    2013-01-01

    In genetic association studies, tests for Hardy-Weinberg proportions are often employed as a quality control checking procedure. Missing genotypes are typically discarded prior to testing. In this paper we show that inference for Hardy-Weinberg proportions can be biased when missing values are discarded. We propose to use multiple imputation of missing values in order to improve inference for Hardy-Weinberg proportions. For imputation we employ a multinomial logit model that uses information from allele intensities and/or neighbouring markers. Analysis of an empirical data set of single nucleotide polymorphisms possibly related to colon cancer reveals that missing genotypes are not missing completely at random. Deviation from Hardy-Weinberg proportions is mostly due to a lack of heterozygotes. Inbreeding coefficients estimated by multiple imputation of the missings are typically lowered with respect to inbreeding coefficients estimated by discarding the missings. Accounting for missings by multiple imputation qualitatively changed the results of 10 to 17% of the statistical tests performed. Estimates of inbreeding coefficients obtained by multiple imputation showed high correlation with estimates obtained by single imputation using an external reference panel. Our conclusion is that imputation of missing data leads to improved statistical inference for Hardy-Weinberg proportions.

  3. Red muscle proportions and enzyme activities in deep-sea demersal fishes.

    PubMed

    Drazen, J C; Dugan, B; Friedman, J R

    2013-12-01

    Owing to the paucity of data on the red muscle of deep-sea fishes, the goal of this study was to determine the proportions of red muscle in demersal fishes and its enzymatic activities to characterize how routine swimming abilities change with depths of occurrence. Cross sectional analysis of the trunk musculature was used to evaluate the proportion of red muscle in 38 species of Californian demersal fishes living at depths between 100 and 3000 m. The activity of metabolic enzymes was also assayed in a sub-set of 18 species. Benthic fishes had lower proportions of red muscle and lower metabolic enzyme activities than benthopelagic species. Mean proportion of red muscle declined significantly with depth with the greatest range of values in shallow waters and species with low proportions found at all depths. This suggested that while sedentary species occur at all depths, the most active species occur in shallow waters. Citrate synthase activity declined significantly with depth across all species, indicating that the mass-specific metabolic capacity of red muscle is lower in deep-sea species. These patterns may be explained by coupling of red and white muscle physiologies, a decrease in physical energy of the environment with depth or by the prevalence of anguilliform body forms and swimming modes in deep-living species.

  4. Collision error avoidance: influence of proportion congruency and sensorimotor memory on open-loop grasp control.

    PubMed

    Brydges, Ryan; Dubrowski, Adam

    2009-10-01

    Grasping behaviour involves the integration of current and historical knowledge about an object, a process that can be influenced by sensory uncertainty. In the present study, participants simultaneously interacted with a visual cue and a haptic cue before reaching to grasp a target object. The visual cue was either congruent (equal in size to haptic cue and target) or incongruent (larger than haptic cue and target). To enhance sensory uncertainty, we manipulated the proportion of congruent trials to be either 80 or 20%. We compared grasp kinematics and forces between congruent and incongruent trials and between the 20 and 80% proportion congruency groups. We also studied the effects of trial history by comparing the performance of congruent and incongruent trials preceded by either the same or opposite trial type. Proportion congruency did not affect temporal kinematics but did affect maximum grip aperture (MGA) as the 80% proportion congruency group used a greater MGA, regardless of trial type. For grasping forces, an interaction effect showed that the 20% proportion congruency group used a greater peak load force on congruent trials. Incongruent trials that followed congruent trials had decreased movement time, increased MGA and increased grasping forces, relative to those that followed incongruent trials. We interpret the data to suggest that the grasp control system integrates multisensory information using flexible, yet specific criteria regarding task constraints. The prevention of collision error (i.e., an inadequate MGA when contacting the target) may be one guiding principle in the control process.

  5. Volcanic gas

    USGS Publications Warehouse

    McGee, Kenneth A.; Gerlach, Terrance M.

    1995-01-01

    In Roman mythology, Vulcan, the god of fire, was said to have made tools and weapons for the other gods in his workshop at Olympus. Throughout history, volcanoes have frequently been identified with Vulcan and other mythological figures. Scientists now know that the “smoke" from volcanoes, once attributed by poets to be from Vulcan’s forge, is actually volcanic gas naturally released from both active and many inactive volcanoes. The molten rock, or magma, that lies beneath volcanoes and fuels eruptions, contains abundant gases that are released to the surface before, during, and after eruptions. These gases range from relatively benign low-temperature steam to thick hot clouds of choking sulfurous fume jetting from the earth. Water vapor is typically the most abundant volcanic gas, followed by carbon dioxide and sulfur dioxide. Other volcanic gases are hydrogen sulfide, hydrochloric acid, hydrogen, carbon monoxide, hydrofluoric acid, and other trace gases and volatile metals. The concentrations of these gas species can vary considerably from one volcano to the next.

  6. Gas chromatography.

    PubMed

    Eiceman, G A; Hill, H H; Gardea-Torresdey, J

    1998-06-15

    This review of the fundamental developments in gas chromatography (GC) includes articles published from 1996 and 1997 and an occasional citation prior to 1996. The literature was reviewed principally using CA Selects for Gas Chromatography from Chemical Abstracts Service, and some significant articles from late 1997 may be missing from the review. In addition, the online SciSearch Database (Institute for Scientific Information) capability was used to abstract review articles or books. As with the prior recent reviews, emphasis has been given to the identification and discussion of selected developments, rather than a presentation of a comprehensive literature search, now available widely through computer-based resources. During the last two years, several themes emerged from a review of the literature. Multidimensional gas chromatography has undergone transformation encompassing a broad range of activity, including attempts to establish methods using chromatographic principles rather than a totally empirical approach. Another trend noted was a comparatively large effort in chromatographic theory through modeling efforts; these presumably became resurgent with inexpensive and powerful computing tools. Finally, an impressive level of activity was noted through the themes highlighted in this review, and this was particularly true with detectors and field instruments.

  7. Quantification of the extent of non-proportional viscous damping in discrete vibratory systems

    NASA Astrophysics Data System (ADS)

    Praterjr, G.; Singh, R.

    1986-01-01

    The primary objective of this paper is to present several numerical indices developed to determine quantitatively the extent of non-proportional damping present within a discrete vibratory system. A total of five distinct indices are considered. Two of these are based on the complex modes of a generally damped system, and three are based on the configuration of the system damping matrix after transformation into real normal coordinates. Each index has been normalized so that it assumes values between zero (proportional damping case) and one. Application of the indices is illustrated through a four degree of freedom system example problems. As part of this exercise, an effort is made to relate the magnitudes of the indices to the frequency response errors induced by two proportional damping approximations often found in the literature.

  8. Confidence interval of difference of proportions in logistic regression in presence of covariates.

    PubMed

    Reeve, Russell

    2016-03-16

    Comparison of treatment differences in incidence rates is an important objective of many clinical trials. However, often the proportion is affected by covariates, and the adjustment of the predicted proportion is made using logistic regression. It is desirable to estimate the treatment differences in proportions adjusting for the covariates, similarly to the comparison of adjusted means in analysis of variance. Because of the correlation between the point estimates in the different treatment groups, the standard methods for constructing confidence intervals are inadequate. The problem is more difficult in the binary case, as the comparison is not uniquely defined, and the sampling distribution more difficult to analyze. Four procedures for analyzing the data are presented, which expand upon existing methods and generalize the link function. It is shown that, among the four methods studied, the resampling method based on the exact distribution function yields a coverage rate closest to the nominal.

  9. Method of technological control of proportional electromagnets for control systems of their production

    NASA Astrophysics Data System (ADS)

    Lankin, A. M.; Lankin, M. V.; Lankina, M. Y.

    2017-02-01

    This article describes the algorithm of the method of technological control of proportional solenoids to control their production process. An important element in the process of production of proportional solenoids is to identify deviations from the nominal mode of its occurrence. This situation shows the relevance of developing a method of technological control of proportional solenoids providing information on process control in a short time. The proposed algorithm consists of four steps: measuring the dynamic characteristics of the magnetization of electromagnet testing, the use of principal component analysis to reduce the dimension of the analyzed information, the classification of products by the condition and sub-standards, the definition of the numerical values of the manufacturing process variations using a calibration method. This approach allows us to determine the type and the degree of impairment of the mode of the process that will lead to effective management of the production process of the electromagnetic actuators.

  10. Examining the Proportion of Dietary Phosphorus From Plants, Animals, and Food Additives Excreted in Urine.

    PubMed

    St-Jules, David E; Jagannathan, Ram; Gutekunst, Lisa; Kalantar-Zadeh, Kamyar; Sevick, Mary Ann

    2017-03-01

    Phosphorus bioavailability is an emerging topic of interest in the field of renal nutrition that has important research and clinical implications. Estimates of phosphorus bioavailability, based on digestibility, indicate that bioavailability of phosphorus increases from plants to animals to food additives. In this commentary, we examined the proportion of dietary phosphorus from plants, animals, and food additives excreted in urine from four controlled-feeding studies conducted in healthy adults and patients with chronic kidney disease. As expected, a smaller proportion of phosphorus from plant foods was excreted in urine compared to animal foods. However, contrary to expectations, phosphorus from food additives appeared to be incompletely absorbed. The apparent discrepancy between digestibility of phosphorus additives and the proportion excreted in urine suggests a need for human balance studies to determine the bioavailability of different sources of phosphorus.

  11. Unconscious context-specific proportion congruency effect in a stroop-like task.

    PubMed

    Panadero, A; Castellanos, M C; Tudela, P

    2015-01-01

    Cognitive control is a central topic of interest in psychology and cognitive neuroscience and has traditionally been associated with consciousness. However, recent research suggests that cognitive control may be unconscious in character. The main purpose of our study was to further explore this area of research focusing on the possibly unconscious nature of the conflict adaptation effect, specifically the context-specific proportion congruency effect (CSPCE), by using a masked Stroop-like task where the proportion of congruency was associated to various masks. We used electrophysiological measures to analyze the neural correlates of the CSPCE. Results showed evidence of an unconscious CSPCE in reaction times (RTs) and the N2 and P3 components. In addition, the P2 component evoked by both target and masks indicated that the proportion of congruency was processed earlier than the congruency between the color word and the ink color of the target. Taken together, our results provided evidence pointing to an unconscious CSPCE.

  12. Fuzzy portfolio model with fuzzy-input return rates and fuzzy-output proportions

    NASA Astrophysics Data System (ADS)

    Tsaur, Ruey-Chyn

    2015-02-01

    In the finance market, a short-term investment strategy is usually applied in portfolio selection in order to reduce investment risk; however, the economy is uncertain and the investment period is short. Further, an investor has incomplete information for selecting a portfolio with crisp proportions for each chosen security. In this paper we present a new method of constructing fuzzy portfolio model for the parameters of fuzzy-input return rates and fuzzy-output proportions, based on possibilistic mean-standard deviation models. Furthermore, we consider both excess or shortage of investment in different economic periods by using fuzzy constraint for the sum of the fuzzy proportions, and we also refer to risks of securities investment and vagueness of incomplete information during the period of depression economics for the portfolio selection. Finally, we present a numerical example of a portfolio selection problem to illustrate the proposed model and a sensitivity analysis is realised based on the results.

  13. Eigensolutions of non-proportionally damped systems based on continuous damping sensitivity

    NASA Astrophysics Data System (ADS)

    Lázaro, Mario

    2016-02-01

    The viscous damping model has been widely used to represent dissipative forces in structures under mechanical vibrations. In multiple degree of freedom systems, such behavior is mathematically modeled by a damping matrix, which in general presents non-proportionality, that is, it does not become diagonal in the modal space of the undamped problem. Eigensolutions of non-proportional systems are usually estimated assuming that the modal damping matrix is diagonally dominant (neglecting the off-diagonal terms) or, in the general case, using the state-space approach. In this paper, a new closed-form expression for the complex eigenvalues of non-proportionally damped system is proposed. The approach is derived assuming small damping and involves not only the diagonal terms of the modal damping matrix, but also the off-diagonal terms, which appear under higher order. The validity of the proposed approach is illustrated through a numerical example.

  14. Evolutionary reversals of limb proportions in early hominids? Evidence from KNM-ER 3735 (Homo habilis).

    PubMed

    Haeusler, Martin; McHenry, Henry M

    2007-10-01

    Upper-to-lower limb proportions of Homo habilis are often said to be more ape-like than those of its reputed ancestor, Australopithecus afarensis. Such proportions would either imply multiple evolutionary reversals or parallel development of a relatively short upper limb in A. afarensis and later Homo. However, assessments of limb proportions are complicated by the fragmentary nature of the two known H. habilis skeletons, OH 62 and KNM-ER 3735. Initially, KNM-ER 3735 was compared to A.L. 288-1 (A. afarensis) using a single modern human and chimpanzee as reference. Here, based on a larger comparative sample, we find that the relative size of the distal humerus, radial head, and shaft of both KNM-ER 3735 and A.L. 288-1 lie within the range of variation of modern humans, whereas their sacra are small as is the case for all early hominids. In addition, their manual phalanges are similar in having a gracile base but robust midshaft. Contrary to earlier studies, the fossils are not differentiable from each other statistically with respect to all features listed above. On the other hand, they differ in robusticity of the scapular spine and relative length of the radial neck. An exact randomization test suggests only a very low probability of finding a similar degree of difference within a single species of extant hominoids. In contrast to the consensus view, we conclude that A.L. 288-1 had a short, human-like forearm, whereas KNM-ER 3735 possessed a distinctly longer forearm and more powerful shoulder girdle. This interpretation fits with earlier conclusions that suggested human-like humerofemoral proportions but chimpanzee-like brachial proportions for Homo habilis. Thus, the scenario of a unidirectional, progressive change in limb proportions within the hominid lineage is not supported by our work.

  15. Simulation and experiment research on the proportional pressure control of water-assisted injection molding

    NASA Astrophysics Data System (ADS)

    Zhou, Hua; Chen, Yinglong; Zhang, Zengmeng; Yang, Huayong

    2012-05-01

    Water-assisted injection molding (WAIM), a newly developed fluid-assisted injection molding technology has drawn more and more attentions for the energy saving, short cooling circle time and high quality of products. Existing research for the process of WAIM has shown that the pressure control of the injecting water is mostly important for the WAIM. However, the proportional pressure control for the WAIM system is quite complex due to the existence of nonlinearities in the water hydraulic system. In order to achieve better pressure control performance of the injecting water to meet the requirements of the WAIM, the proportional pressure control of the WAIM system is investigated both numerically and experimentally. A newly designed water hydraulic system for WAIM is first modeled in AMEsim environment, the load characteristics and the nonlinearities of water hydraulic system are both considered, then the main factors affecting the injecting pressure and load flow rate are extensively studied. Meanwhile, an open-loop model-based compensation control strategy is employed to regulate the water injection pressure and a feedback proportional integrator controller is further adopted to achieve better control performance. In order to verify the AMEsim simulation results WAIM experiment for particular Acrylonitrile Butadiene Styrene (ABS) parts is implemented and the measured experimental data including injecting pressure and flow rate results are compared with the simulation. The good coincidence between experiment and simulation shows that the AMEsim model is accurate, and the tracking performance of the load pressure indicates that the proposed control strategy is effective for the proportional pressure control of the nonlinear WAIM system. The proposed proportional pressure control strategy and the conclusions drawn from simulation and experiment contribute to the application of water hydraulic proportional control and WAIM technology.

  16. The use of biocultural data in interpreting sex differences in body proportions among rural Amazonians

    PubMed Central

    VERCELLOTTI, GIUSEPPE; PIPERATA, BARBARA A.

    2012-01-01

    Variation in height and body proportions is relatively well understood at the inter-population level, but less is known about intra-population variation. This study explores intra-population variation in body proportions among 172 (88 female; 84 male) adult rural Amazonians. We test the hypotheses that: 1) stunting is associated with changes in proportions and fatness; 2) the sexes express different proportions in response to similar environmental stress and 3) female growth is negatively affected by the costs of reproduction. We examined height, sitting height and total leg length in subsamples based on sex and nutritional status (stunted/non-stunted) in relation to biocultural factors including access to food and healthcare and female reproductive history parameters. Differences in proportions were examined using the Quick-Test (Tsutakawa and Hewett, 1977); correlation analyses were employed to detect associations between anthropometric data and body fatness, and female reproductive history parameters. We found significantly higher rates of stunting among females (X2=5.31; p=0.02; RR=1.4). Stunted individuals exhibited relatively shorter legs than non-stunted individuals (p=0.02), although this was not found in within-sex analyses. A significant negative correlation was found between leg length index and fatness (p<0.01). Lastly, females exhibited relatively shorter legs than males (p=0.0003) and, among females, height and leg length were significantly positively correlated with age-at-first-birth (p<0.02) suggesting that adolescent pregnancy may negatively affect growth in this population. Our findings provide insights for the study of intra-population variation in body proportions and highlight the importance of biocultural data in interpreting the pattern of variation observed in living and past populations. PMID:22120650

  17. Clinical outcomes of IgA nephropathy patients with different proportions of crescents

    PubMed Central

    Zhang, Wang; Zhou, Qian; Hong, Lingyao; Chen, Wenfang; Yang, Shicong; Yang, Qiongqiong; Chen, Wei; Yu, Xueqing

    2017-01-01

    Abstract Crescents involving more than 50% of glomeruli in IgA nephropathy (IgAN) signify a rapid deterioration of renal function. However, little is known about the prognosis of IgAN patients presenting crescents in less than 50% of glomeruli. We aimed to investigate the clinicopathological characteristics and outcomes of IgAN patients with different proportions of crescents. From January 2000 to December 2011, biopsy-proven primary IgAN patients with histological crescents formation were enrolled in this retrospective cohort study. The patients were divided into 4 groups on the basis of crescent proportion as follows: <5%, 5% to 9%, 10% to 24%, and ≥25%. The primary endpoint was defined as the doubling of baseline serum creatinine (SCr) and/or end-stage renal disease (ESRD), and the secondary endpoint was death. A total of 538 crescent-featured IgAN patients were followed up and included in the analysis. The median crescent proportion was 8.0%. An increasing crescent proportion was associated with a reduced estimated glomerular filtration rate (eGFR), decreased level of hemoglobin, and increased amount of urine protein excretion. After a median follow-up period of 51 months (range 12–154 months), the endpoint events-free survival rate of the above 4 groups were 69.9%, 47.7%, 43.8%, and 40.6%, respectively (Log rank=13.7, P= 0.003), when we incorporated death with renal outcome as a composite endpoint. Multivariate Cox regression analyses adjusting for eGFR, hypertension, proteinuria, and the Oxford-MEST classification demonstrated the predictive significance of an increasing crescent proportion with renal survival and mortality (each increase by 5% [log-transformed]: HR=1.51, 95% CI 1.08–2.11, P = 0.02). Further comparisons of patients with small proportions of crescents (<5%) and those absent of such pathological lesion showed that the 2 groups of patients had comparable prognosis. An increasing crescent proportion was identified as an independent

  18. Global exponential periodicity and stability of recurrent neural networks with multi-proportional delays.

    PubMed

    Zhou, Liqun; Zhang, Yanyan

    2016-01-01

    In this paper, a class of recurrent neural networks with multi-proportional delays is studied. The nonlinear transformation transforms a class of recurrent neural networks with multi-proportional delays into a class of recurrent neural networks with constant delays and time-varying coefficients. By constructing Lyapunov functional and establishing the delay differential inequality, several delay-dependent and delay-independent sufficient conditions are derived to ensure global exponential periodicity and stability of the system. And several examples and their simulations are given to illustrate the effectiveness of obtained results.

  19. Force-proportional reinforcement: pimozide does not reduce rats' emission of higher forces for sweeter rewards.

    PubMed

    Kirkpatrick, M A; Fowler, S C

    1989-02-01

    A two-step force-proportional reinforcement procedure was used to assess the efficacy of a sucrose reward under neuroleptic challenge. The force-proportional reinforcement method entails an increase in the quality of reward contingent upon higher force-emission. This paradigm was conceived as a rate-free means of addressing the putative anhedonic effects of dopaminergic receptor-blocking agents. Results failed to support the anhedonia interpretation of neuroleptic-induced response decrements: Pimozide did not diminish the ability of a high-concentration sucrose solution to maintain elevated response forces. Alternatives to the anhedonia interpretation were discussed with emphasis on the drug's motor effects in the temporal domain.

  20. Simultaneous measurement of tritium and radiocarbon by ultra-low-background proportional counting

    DOE PAGES

    Mace, Emily; Aalseth, Craig; Alexander, Tom; ...

    2016-12-21

    Use of ultra-low-background capabilities at Pacific Northwest National Laboratory provide enhanced sensitivity for measurement of low-activity sources of tritium and radiocarbon using proportional counters. Tritium levels are nearly back to pre-nuclear test backgrounds (~2-8 TU in rainwater), which can complicate their dual measurement with radiocarbon due to overlap in the beta decay spectra. In this paper, we present results of single-isotope proportional counter measurements used to analyze a dual-isotope methane sample synthesized from ~120 mg of H2O and present sensitivity results.

  1. Simultaneous measurement of tritium and radiocarbon by ultra-low-background proportional counting

    SciTech Connect

    Mace, Emily; Aalseth, Craig; Alexander, Tom; Back, Henning; Day, Anthony; Hoppe, Eric; Keillor, Martin; Moran, Jim; Overman, Cory; Panisko, Mark; Seifert, Allen

    2016-12-21

    Use of ultra-low-background capabilities at Pacific Northwest National Laboratory provide enhanced sensitivity for measurement of low-activity sources of tritium and radiocarbon using proportional counters. Tritium levels are nearly back to pre-nuclear test backgrounds (~2-8 TU in rainwater), which can complicate their dual measurement with radiocarbon due to overlap in the beta decay spectra. In this paper, we present results of single-isotope proportional counter measurements used to analyze a dual-isotope methane sample synthesized from ~120 mg of H2O and present sensitivity results.

  2. SSG-4 - An automated spring small grains proportion estimator. [for Landsat crop classification

    NASA Technical Reports Server (NTRS)

    Dennis, T. B.; Cate, R. B.; Smyrski, M. M.; Baker, T. C.; Nazare, C. V.

    1982-01-01

    In connection with an implementation of the classification procedures employed in the Large Area Crop Inventory Experiment (LACIE), a human analyst had to provide labeled samples. The present investigation is concerned with an automated proportion estimation procedure which has been derived from the early field-labeling procedures used in LACIE. This procedure was developed for the U.S./Canada Spring Small Grains Pilot Experiment. It is demonstrated that the considered spatial/color-based proportion estimation procedure provides the agricultural remote-sensing community with the basic tools to develop unbiased and highly efficient procedures for obtaining crop area estimates at the end of the season.

  3. Clinical outcomes of IgA nephropathy patients with different proportions of crescents.

    PubMed

    Zhang, Wang; Zhou, Qian; Hong, Lingyao; Chen, Wenfang; Yang, Shicong; Yang, Qiongqiong; Chen, Wei; Yu, Xueqing

    2017-03-01

    Crescents involving more than 50% of glomeruli in IgA nephropathy (IgAN) signify a rapid deterioration of renal function. However, little is known about the prognosis of IgAN patients presenting crescents in less than 50% of glomeruli. We aimed to investigate the clinicopathological characteristics and outcomes of IgAN patients with different proportions of crescents.From January 2000 to December 2011, biopsy-proven primary IgAN patients with histological crescents formation were enrolled in this retrospective cohort study. The patients were divided into 4 groups on the basis of crescent proportion as follows: <5%, 5% to 9%, 10% to 24%, and ≥25%. The primary endpoint was defined as the doubling of baseline serum creatinine (SCr) and/or end-stage renal disease (ESRD), and the secondary endpoint was death.A total of 538 crescent-featured IgAN patients were followed up and included in the analysis. The median crescent proportion was 8.0%. An increasing crescent proportion was associated with a reduced estimated glomerular filtration rate (eGFR), decreased level of hemoglobin, and increased amount of urine protein excretion. After a median follow-up period of 51 months (range 12-154 months), the endpoint events-free survival rate of the above 4 groups were 69.9%, 47.7%, 43.8%, and 40.6%, respectively (Log rank=13.7, P= 0.003), when we incorporated death with renal outcome as a composite endpoint. Multivariate Cox regression analyses adjusting for eGFR, hypertension, proteinuria, and the Oxford-MEST classification demonstrated the predictive significance of an increasing crescent proportion with renal survival and mortality (each increase by 5% [log-transformed]: HR=1.51, 95% CI 1.08-2.11, P = 0.02). Further comparisons of patients with small proportions of crescents (<5%) and those absent of such pathological lesion showed that the 2 groups of patients had comparable prognosis.An increasing crescent proportion was identified as an independent predictor for

  4. Measurement and simulation of lineal energy distribution at the CERN high energy facility with a tissue equivalent proportional counter.

    PubMed

    Rollet, S; Autischer, M; Beck, P; Latocha, M

    2007-01-01

    The response of a tissue equivalent proportional counter (TEPC) in a mixed radiation field with a neutron energy distribution similar to the radiation field at commercial flight altitudes has been studied. The measurements have been done at the CERN-EU High-Energy Reference Field (CERF) facility where a well-characterised radiation field is available for intercomparison. The TEPC instrument used by the ARC Seibersdorf Research is filled with pure propane gas at low pressure and can be used to determine the lineal energy distribution of the energy deposition in a mass of gas equivalent to a 2 microm diameter volume of unit density tissue, of similar size to the nuclei of biological cells. The linearity of the detector response was checked both in term of dose and dose rate. The effect of dead-time has been corrected. The influence of the detector exposure location and orientation in the radiation field on the dose distribution was also studied as a function of the total dose. The microdosimetric distribution of the absorbed dose as a function of the lineal energy has been obtained and compared with the same distribution simulated with the FLUKA Monte Carlo transport code. The dose equivalent was calculated by folding this distribution with the quality factor as a function of linear energy transfer. The comparison between the measured and simulated distributions show that they are in good agreement. As a result of this study the detector is well characterised, thanks also to the numerical simulations the instrument response is well understood, and it's currently being used onboard the aircrafts to evaluate the dose to aircraft crew caused by cosmic radiation.

  5. The Use of Geometry and Proportional Reasoning Techniques at the US Department of Agriculture

    ERIC Educational Resources Information Center

    Farnsworth, Ralph Edward

    2006-01-01

    This paper discusses the use of geometry and proportional reasoning techniques used at the United States Department of Agriculture by two of its branches: the Farm Service Agency and the Natural Resources Conservation Service. This paper discusses the agricultural agency and two branches involved, details a seven-lesson geometry module for high…

  6. Multivariate statistical approach to estimate mixing proportions for unknown end members

    USGS Publications Warehouse

    Valder, Joshua F.; Long, Andrew J.; Davis, Arden D.; Kenner, Scott J.

    2012-01-01

    A multivariate statistical method is presented, which includes principal components analysis (PCA) and an end-member mixing model to estimate unknown end-member hydrochemical compositions and the relative mixing proportions of those end members in mixed waters. PCA, together with the Hotelling T2 statistic and a conceptual model of groundwater flow and mixing, was used in selecting samples that best approximate end members, which then were used as initial values in optimization of the end-member mixing model. This method was tested on controlled datasets (i.e., true values of estimates were known a priori) and found effective in estimating these end members and mixing proportions. The controlled datasets included synthetically generated hydrochemical data, synthetically generated mixing proportions, and laboratory analyses of sample mixtures, which were used in an evaluation of the effectiveness of this method for potential use in actual hydrological settings. For three different scenarios tested, correlation coefficients (R2) for linear regression between the estimated and known values ranged from 0.968 to 0.993 for mixing proportions and from 0.839 to 0.998 for end-member compositions. The method also was applied to field data from a study of end-member mixing in groundwater as a field example and partial method validation.

  7. Linking Proportionality across the Science and Mathematics Curricula through Science Literacy Maps

    ERIC Educational Resources Information Center

    Richardson, Kerri; Matthews, Catherine; Thompson, Catherine

    2008-01-01

    Proportionality should be a central focus of the middle-grades science and mathematics curricula and concepts such as density can be introduced and taught in both disciplines, highlighting for students the connections between science and mathematics. This month's column describes how teachers can utilize the "The Atlas of Science Literacy" and…

  8. Proportionality: The X-Plane Generation. NASA Connect: Program 5 in the 1999-2000 Series.

    ERIC Educational Resources Information Center

    National Aeronautics and Space Administration, Hampton, VA. Langley Research Center.

    This teaching unit is designed to help students in grades 4-8 explore the concepts of scaling and proportion in the context of spacecraft design. The units in this series have been developed to enhance and enrich mathematics, science, and technology education and to accommodate different teaching and learning styles. Each unit consists of a…

  9. Heavy ion beam studies and imaging with a multiplane multiwire proportional chamber

    SciTech Connect

    Chu, W.T.; Alonso, J.R.; Tobias, C.A.

    1981-03-01

    A 16-plane multiwire proportional chamber is used to accurately measure intensity profiles of heavy ion beams at the Bevalac. An imaging capability has now been developed for the system, allowing for reconstruction of 3-dimensional representation of radiological objects using heavy ion beams.

  10. Estimation of the Proportion of Genetic Variation Accounted for by DNA Tests

    Technology Transfer Automated Retrieval System (TEKTRAN)

    An increasingly relevant question in evaluating commercial DNA tests is "What proportion of the additive genetic variation in the target trait is accounted for by the test?" Therefore, several estimators of this quantity were evaluated by simulation of a population of 1000 animals with 100 sires, ea...

  11. Estimation Of The Proportion Of Variation Accounted For By DNA Tests. II: Phenotypic Variance

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The proportion of phenotypic variation accounted for (Rp2) is an important characteristic of a DNA test. Therefore, several estimators of this quantity were evaluated by simulation of 500 replicates of a population of 1000 progeny of 100 sires (3 levels of narrow sense heritability and 4 levels of ...

  12. VennMaster: Area-proportional Euler diagrams for functional GO analysis of microarrays

    PubMed Central

    Kestler, Hans A; Müller, André; Kraus, Johann M; Buchholz, Malte; Gress, Thomas M; Liu, Hongfang; Kane, David W; Zeeberg, Barry R; Weinstein, John N

    2008-01-01

    Background Microarray experiments generate vast amounts of data. The functional context of differentially expressed genes can be assessed by querying the Gene Ontology (GO) database via GoMiner. Directed acyclic graph representations, which are used to depict GO categories enriched with differentially expressed genes, are difficult to interpret and, depending on the particular analysis, may not be well suited for formulating new hypotheses. Additional graphical methods are therefore needed to augment the GO graphical representation. Results We present an alternative visualization approach, area-proportional Euler diagrams, showing set relationships with semi-quantitative size information in a single diagram to support biological hypothesis formulation. The cardinalities of sets and intersection sets are represented by area-proportional Euler diagrams and their corresponding graphical (circular or polygonal) intersection areas. Optimally proportional representations are obtained using swarm and evolutionary optimization algorithms. Conclusion VennMaster's area-proportional Euler diagrams effectively structure and visualize the results of a GO analysis by indicating to what extent flagged genes are shared by different categories. In addition to reducing the complexity of the output, the visualizations facilitate generation of novel hypotheses from the analysis of seemingly unrelated categories that share differentially expressed genes. PMID:18230172

  13. TACI: a code for interactive analysis of neutron data produced by a tissue equivalent proportional counter

    SciTech Connect

    Cummings, F.M.

    1984-06-01

    The TEPC analysis code (TACI) is a computer program designed to analyze pulse height data generated by a tissue equivalent proportional counter (TEPC). It is written in HP BASIC and is for use on an HP-87XM personal computer. The theory of TEPC analysis upon which this code is based is summarized.

  14. 21 CFR 201.303 - Labeling of drug preparations containing significant proportions of wintergreen oil.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 4 2011-04-01 2011-04-01 false Labeling of drug preparations containing significant proportions of wintergreen oil. 201.303 Section 201.303 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS: GENERAL LABELING Specific...

  15. 21 CFR 201.303 - Labeling of drug preparations containing significant proportions of wintergreen oil.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 4 2010-04-01 2010-04-01 false Labeling of drug preparations containing significant proportions of wintergreen oil. 201.303 Section 201.303 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS: GENERAL LABELING Specific...

  16. Large-proportional shrunken bio-replication of shark skin based on UV-curing shrinkage

    NASA Astrophysics Data System (ADS)

    Chen, Huawei; Che, Da; Zhang, Xin; Yue, Yue; Zhang, Deyuan

    2015-01-01

    The shark skin effect has attracted worldwide attention because of its superior drag reduction. As the product of natural selection, the maximum drag reduction of shark skin is found in its normal living environment. Large-proportional shrinkage of shark skin morphology is greatly anticipated for its adaptation to faster fluid flow. One novel approach, large-proportional shrunken bio-replication, is proposed as a method to adjust the optimal drag reduction region of shark skin based on the shrinkage of UV-cured material. The shark skin is taken as a replica template to allow large-proportional shrinking in the drag reduction morphology by taking advantage of the shrinkage of UV-curable material. The accuracy of the large-proportional shrunken bio-replication approach is verified by a comparison between original and shrunken bio-replicated shark skin, which shows that the shrinking ratio can reach 23% and the bio-replication accuracy is higher than 95%. In addition, the translation of the optimum drag reduction peak of natural surface function to various applications and environments is proved by drag reduction experiments.

  17. Eighth Grade In-Service Teachers' Knowledge of Proportional Reasoning and Functions: A Secondary Data Analysis

    ERIC Educational Resources Information Center

    Masters, Jessica

    2012-01-01

    A secondary data analysis was conducted using a large dataset from a study related to online professional development for eighth grade teachers of mathematics. Using this data, the paper provides a snapshot of the current state of teachers' knowledge related to proportional reasoning and functions. The paper also considers how teachers' knowledge…

  18. Maxillary anterior tooth dimensions and proportions in an Irish young adult population.

    PubMed

    Condon, M; Bready, M; Quinn, F; O'Connell, B C; Houston, F J; O'Sullivan, M

    2011-07-01

    This study was undertaken in a young Irish population to determine the dimensions and ratios of the six maxillary anterior teeth. One hundred and nine Irish subjects (age 18-25 inclusive) had irreversible hydrocolloid impressions made of their maxillary dentition poured in type V stone. Clinical crown dimensions were measured with a digital calliper. The stone casts were digitally photographed in a standardised manner enabling calculation of various ratios between the maxillary anterior teeth. Sexual dimorphism existed for various tooth dimensions; most notably canine teeth were in the region of 0·8 mm longer and 0·6 mm wider in males. Central and lateral incisors were found to be 0·5 mm wider in males. It is, therefore, recommended that dimensional tooth guidelines should be given for each of the sexes and not on a population basis. With regard to tooth proportion ratios, no significant differences were found between genders or the left and right sides for any of the measurements or ratios measured. The digitally recorded tooth proportions were similar for both sexes, and the Golden Proportion guidelines could only be applied to the lateral incisor/central incisor widths (0·618). Identified width proportions for the canine/central incisor were 0·58 and for canine/lateral incisor 0·89.

  19. Decision-Tree Models of Categorization Response Times, Choice Proportions, and Typicality Judgments

    ERIC Educational Resources Information Center

    Lafond, Daniel; Lacouture, Yves; Cohen, Andrew L.

    2009-01-01

    The authors present 3 decision-tree models of categorization adapted from T. Trabasso, H. Rollins, and E. Shaughnessy (1971) and use them to provide a quantitative account of categorization response times, choice proportions, and typicality judgments at the individual-participant level. In Experiment 1, the decision-tree models were fit to…

  20. NK Cell Proportion and Number Are Influenced by Genetic Loci on Chromosomes 8, 9, and 17.

    PubMed

    Pelletier, Adam-Nicolas; Guilbault, Lorie; Guimont-Desrochers, Fanny; Hillhouse, Erin E; Lesage, Sylvie

    2016-03-15

    NK cells play a crucial role in innate immunity due to their direct cytotoxicity toward tumors, virally infected cells, and stressed cells, and they also contribute to the orchestration of the adaptive response by their ability to produce immunoregulatory cytokines. In secondary lymphoid organs, NK cells compose the third most abundant lymphocyte subset after T cells and B cells. In this study, we perform an unbiased linkage analysis to determine the genetic loci that may limit the size of the NK cell compartment. Specifically, we exploit differences in NK cell proportion and absolute number between the C57BL/6 and the NOD mice. In addition to the previously identified linkage to chromosome 8, we find that a locus on chromosome 17, which encompasses the MHC locus, impacts NK cell number. Moreover, we identify a locus on mouse chromosome 9 that is strongly linked to the proportion and absolute number of NK cells. Using NOD congenic mice, we validate that both the MHC and the chromosome 9 loci influence the proportion and absolute number of NK cells. We have thus identified additional loci specifically linked to the proportion of NK cells and present some of the potential candidate genes comprised within these loci.

  1. Characteristics of a large system of pad readout wire proportional chambers for the HPC calorimeter

    SciTech Connect

    Camporesi, T.; Cavallo, F.R.; Giordano, V.; Laurenti, G.; Molinari, G.; Navarria, F.L.; Privitera, P.; Rovelli, T.; Valenti, G.; Zucchini, A.

    1989-02-01

    A large system of wire proportional chambers is being constructed for the readout of the High-Density Projection Chamber (HPC) of the DELPHI experiment at the Large Electron-Positron storage ring. The system consists of 144 chambers, each 0.3 m/sup 2/ wide and read out via cathode pads, located at the end of the HPC drift volume.

  2. Musculoskeletal Proportionality, Biomechanical Considerations, and Their Contribution to Movement in Adults and Children.

    PubMed

    O'Brien, Thomas D

    2016-05-01

    The musculoskeletal system grows greatly throughout maturation. When trying to explain differences in strength, power and movement patterns between adults and children many pediatric exercise scientists will assume that this growth is proportional in all dimensions and structures. This article examines the evidence underpinning these assumptions, and considers how changes in fascicle, muscle, tendon and joint proportions may contribute to maturation-induced changes in physical performance. There are only a small number of studies to draw upon, but they consistently indicate that 1) growth changes the functional design of muscles, so that they become better at producing large forces at slow speeds but less able to achieve large length changes or high velocities; 2) the skeleton appears to grow somewhat proportionally before puberty, but this changes throughout adolescence, meaning the moment arm about which the muscle acts does not remain proportional to muscle length or the external moment arm about which joint work acts on the external world. In combination these results show that external measures of whole body or joint performance do not reflect the actual internal muscle function similarly in children and adults. Since our purpose should be to explain and not just describe maturation-induced changes in performance, greater efforts are needed to understand the internal "engine" driving our movement. This necessitates more detailed, longitudinal and dynamically loaded studies of the structure and function of the muscles and their interaction with the skeleton throughout maturation.

  3. Rational Number and Proportional Reasoning: Using Intensive Quantities to Promote Achievement in Mathematics and Science

    ERIC Educational Resources Information Center

    Howe, Christine; Nunes, Terezinha; Bryant, Peter

    2011-01-01

    Student mastery of rational number and proportional reasoning is a recognized challenge, yet supporting mastery is central within mathematics and science. This paper focuses on a 4-lesson teaching programme which was designed to foster mastery in the context of intensive quantities. Intensive quantities such as density, speed and temperature…

  4. Confidence Intervals for the Proportion of Mastery in Criterion-Referenced Measurement.

    ERIC Educational Resources Information Center

    Feldt, Leonard S.

    1996-01-01

    A relatively simple method is developed to obtain confidence intervals for a student's proportion of domain mastery in criterion-referenced or mastery measurement situations. The method uses the binomial distribution as a model for the student's scores under hypothetically repeated assessments, and it makes use of widely available "F"…

  5. A Matter of Balance: Motor Control is Related to Children's Spatial and Proportional Reasoning Skills.

    PubMed

    Frick, Andrea; Möhring, Wenke

    2015-01-01

    Recent research has shown close links between spatial and mathematical thinking and between spatial abilities and motor skills. However, longitudinal research examining the relations between motor, spatial, and mathematical skills is rare, and the nature of these relations remains unclear. The present study thus investigated the relation between children's motor control and their spatial and proportional reasoning. We measured 6-year-olds' spatial scaling (i.e., the ability to reason about different-sized spaces), their mental transformation skills, and their ability to balance on one leg as an index for motor control. One year later (N = 126), we tested the same children's understanding of proportions. We also assessed several control variables (verbal IQ and socio-economic status) as well as inhibitory control, visuo-spatial and verbal working memory. Stepwise hierarchical regressions showed that, after accounting for effects of control variables, children's balance skills significantly increased the explained variance in their spatial performance and proportional reasoning. Our results suggest specific relations between balance skills and spatial as well as proportional reasoning skills that cannot be explained by general differences in executive functioning or intelligence.

  6. Requirements for efficient cell-type proportioning: regulatory timescales, stochasticity and lateral inhibition

    NASA Astrophysics Data System (ADS)

    Pfeuty, B.; Kaneko, K.

    2016-04-01

    The proper functioning of multicellular organisms requires the robust establishment of precise proportions between distinct cell types. This developmental differentiation process typically involves intracellular regulatory and stochastic mechanisms to generate cell-fate diversity as well as intercellular signaling mechanisms to coordinate cell-fate decisions at tissue level. We thus surmise that key insights about the developmental regulation of cell-type proportion can be captured by the modeling study of clustering dynamics in population of inhibitory-coupled noisy bistable systems. This general class of dynamical system is shown to exhibit a very stable two-cluster state, but also metastability, collective oscillations or noise-induced state hopping, which can prevent from timely and reliably reaching a robust and well-proportioned clustered state. To circumvent these obstacles or to avoid fine-tuning, we highlight a general strategy based on dual-time positive feedback loops, such as mediated through transcriptional versus epigenetic mechanisms, which improves proportion regulation by coordinating early and flexible lineage priming with late and firm commitment. This result sheds new light on the respective and cooperative roles of multiple regulatory feedback, stochasticity and lateral inhibition in developmental dynamics.

  7. Partial proportional odds model-an alternate choice for analyzing pedestrian crash injury severities.

    PubMed

    Sasidharan, Lekshmi; Menéndez, Mónica

    2014-11-01

    The conventional methods for crash injury severity analyses include either treating the severity data as ordered (e.g. ordered logit/probit models) or non-ordered (e.g. multinomial models). The ordered models require the data to meet proportional odds assumption, according to which the predictors can only have the same effect on different levels of the dependent variable, which is often not the case with crash injury severities. On the other hand, non-ordered analyses completely ignore the inherent hierarchical nature of crash injury severities. Therefore, treating the crash severity data as either ordered or non-ordered results in violating some of the key principles. To address these concerns, this paper explores the application of a partial proportional odds (PPO) model to bridge the gap between ordered and non-ordered severity modeling frameworks. The PPO model allows the covariates that meet the proportional odds assumption to affect different crash severity levels with the same magnitude; whereas the covariates that do not meet the proportional odds assumption can have different effects on different severity levels. This study is based on a five-year (2008-2012) national pedestrian safety dataset for Switzerland. A comparison between the application of PPO models, ordered logit models, and multinomial logit models for pedestrian injury severity evaluation is also included here. The study shows that PPO models outperform the other models considered based on different evaluation criteria. Hence, it is a viable method for analyzing pedestrian crash injury severities.

  8. Helping Children to Model Proportionally in Group Argumentation: Overcoming the "Constant Sum" Error

    ERIC Educational Resources Information Center

    Misailidou, Christina; Williams, Jullian

    2004-01-01

    We examine eight cases of argumentation in relation to a proportional reasoning task--the "Paint" task--in which the "constant sum" strategy was a significant factor. Our analysis of argument follows Toulmin's (1958) approach and in the discourse we trace factors which seem to facilitate changes in argument. We find that the arguments of "constant…

  9. Fitting Proportional Odds Models to Educational Data in Ordinal Logistic Regression Using Stata, SAS and SPSS

    ERIC Educational Resources Information Center

    Liu, Xing

    2008-01-01

    The proportional odds (PO) model, which is also called cumulative odds model (Agresti, 1996, 2002 ; Armstrong & Sloan, 1989; Long, 1997, Long & Freese, 2006; McCullagh, 1980; McCullagh & Nelder, 1989; Powers & Xie, 2000; O'Connell, 2006), is one of the most commonly used models for the analysis of ordinal categorical data and comes from the class…

  10. 46 CFR 170.173 - Criterion for vessels of unusual proportion and form.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Criterion for vessels of unusual proportion and form. 170.173 Section 170.173 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SUBDIVISION AND STABILITY STABILITY REQUIREMENTS FOR ALL INSPECTED VESSELS Weather Criteria § 170.173...

  11. A Mixture Proportional Hazards Model with Random Effects for Response Times in Tests

    ERIC Educational Resources Information Center

    Ranger, Jochen; Kuhn, Jörg-Tobias

    2016-01-01

    In this article, a new model for test response times is proposed that combines latent class analysis and the proportional hazards model with random effects in a similar vein as the mixture factor model. The model assumes the existence of different latent classes. In each latent class, the response times are distributed according to a…

  12. The Relationship between the Proportional Size of the Special Education Population and Academic Achievement

    ERIC Educational Resources Information Center

    Harper, Patricia Kenner

    2013-01-01

    This investigation addressed the hypothesized effects of the proportional size of a district's special education population on the overall student achievement in selected school districts in Texas. The size of a district's special education population (independent variable) was compared to districts' achievement (dependent variables) in order to…

  13. Confidence Intervals for a Mean and a Proportion in the Bounded Case.

    DTIC Science & Technology

    1986-11-01

    This paper describes a 100x(1-alpha) confidence interval for the mean of a bounded random variable which is shorter than the interval that...Chebyshev’s inequality induces for small alpha and which avoids the error of approximation that assuming normality induces. The paper also presents an analogous development for deriving a 100x(1-alpha) confidence interval for a proportion.

  14. Quality of the Tasks in the New Turkish Elementary Mathematics Textbooks: The Case of Proportional Reasoning

    ERIC Educational Resources Information Center

    Bayazit, Ibrahim

    2013-01-01

    This study examines new Turkish elementary school mathematics textbooks to provide perspectives on the quality of the tasks related to the proportion concept and the ways they are presented. Tasks were analysed for several dimensions with a particular focus on their level of cognitive demands (LCD). Tasks were distinguished in two groups in terms…

  15. Imaging with a multiplane multiwire proportional chamber using heavy ion beams

    SciTech Connect

    Chu, W.T.; Alonso, J.R.; Tobias, C.A.

    1982-01-01

    A 16-plane multiwire proportional chamber has been developed to accurately map intensity profiles of heavy ion beams at the Bevalac. The imaging capability of the system has been tested for reconstruction of 3-dimensional representation of a canine thorax region using heavy ion beams.

  16. Allometry and adaptation of body proportions and stature in African pygmies.

    PubMed

    Shea, B T; Bailey, R C

    1996-07-01

    We have analyzed the growth allometry of external body proportions in Efe pygmies from Zaire and combined these data with values from the literature for comparable dimensions in adult pygmies and nonpygmies. We sequentially tested the hypotheses that adult proportion differences between 1) male vs. female Efe, and 2) pygmies vs. nonpygmies result from ontogenetic scaling, or the differential extension of common patterns of growth allometry. Results indicate an almost complete concordance of allometric trajectories for male and female Efe. These preliminary analyses also strongly suggest that adult nonpygmy Africans generally differ from pygmies in their terminal size and correlated allometric consequences, rather than in more fundamental alterations of underlying patterns of growth. Biacromial diameter emerges as the measurement most likely to depart from this general pattern. These results provide further evidence that shifts in systemic growth hormones yielding differences in terminal overall body size may be accompanied by global and coordinated allometric transformations. Certain proportion differences previously interpreted by some as specific evidence of primitive retention in pygmies in fact reflect simple growth allometric correlates of the derive rapid size decrease in these groups. Selected divergent body proportions characterizing adult pygmies, previously interpreted by some as independent evidence of climatic adaptation, also reflect such allometric correlates of ontogenetic scaling. We critically assess arguments that the small overall body size of pygmies was specifically selected for reasons of thermoregulatory efficiency, and consider an alternative or complementary scenario, based on selection for small size in order to reduce caloric requirements.

  17. Using Dynamic Geometry Software for Teaching Conditional Probability with Area-Proportional Venn Diagrams

    ERIC Educational Resources Information Center

    Radakovic, Nenad; McDougall, Douglas

    2012-01-01

    This classroom note illustrates how dynamic visualization can be used to teach conditional probability and Bayes' theorem. There are two features of the visualization that make it an ideal pedagogical tool in probability instruction. The first feature is the use of area-proportional Venn diagrams that, along with showing qualitative relationships,…

  18. Effects of Contextual Similarity and Target-Repetition Proportion on Negative Priming in RT Distributional Analyses

    ERIC Educational Resources Information Center

    Tse, Chi-Shing; Hutchison, Keith A.; Li, Yongna

    2011-01-01

    Participants' reaction time (RT) data in a prime-probe flanker task (e.g., ABA-CAC) were analyzed in terms of the characteristics of RT distribution to examine possible mechanisms that produce negative priming. When the prime and probe were presented in the same context and the proportion of repetition-target trials (TRP) was 0.33, negative…

  19. Relatedness Proportion Effects in Semantic Categorization: Reconsidering the Automatic Spreading Activation Process

    ERIC Educational Resources Information Center

    de Wit, Bianca; Kinoshita, Sachiko

    2014-01-01

    Semantic priming effects at a short prime-target stimulus onset asynchrony are commonly explained in terms of an automatic spreading activation process. According to this view, the proportion of related trials should have no impact on the size of the semantic priming effect. Using a semantic categorization task ("Is this a living…

  20. The Role of Number in Proportional Reasoning: A Prospective Teacher's Understanding

    ERIC Educational Resources Information Center

    Person, Axelle C.; Berenson, Sarah B.; Greenspon, Paula J.

    2004-01-01

    We examine a prospective high school teacher's instructional representations of rate of change and right triangle trigonometry to investigate his interpretation and understanding in relation to the development of proportional reasoning. Despite a constant effort by the subject to resort to "real life" examples in order to give meaning to his…

  1. Exploring the Utility of a School-Age Narrative Microstructure Index: Proportion of Restricted Utterances

    ERIC Educational Resources Information Center

    Jerger, Sara; Thorne, John C.

    2016-01-01

    Purpose: This research attempted to replicate Hoffman's 2009 finding that the proportion of narrative utterances with semantic or syntactic errors (i.e., = 14% "restricted utterances") can differentiate school-age children with typical development from those with language impairment with a sensitivity of 83% and specificity of 88%.…

  2. Individualized Math Problems in Ratio and Proportion. Oregon Vo-Tech Mathematics Problem Sets.

    ERIC Educational Resources Information Center

    Cosler, Norma, Ed.

    This is one of eighteen sets of individualized mathematics problems developed by the Oregon Vo-Tech Math Project. Each of these problem packages is organized around a mathematical topic and contains problems related to diverse vocations. Solutions are provided for all problems. This volume contains problems involving ratio and proportion. Some…

  3. Sedimentary rock types: relative proportions as a function of geological time.

    PubMed

    Garrels, R M; Mackenzie, F T

    1969-02-07

    Proportions of sedimentary rock types remaining today differ from period to period. These differences may be chiefly the result of differential rates of deposition and erosion of the various components of the rocks. Lower percentages of limestones and evaporites in Precambrian rocks than in post-Precambrian rocks probably represent selective loss of these more easily removable components from the original deposits.

  4. Primary Teachers' Knowledge for Teaching Ratio and Proportion in Mathematics: The Case of Indonesia

    ERIC Educational Resources Information Center

    Ekawati, Rooselyna; Lin, Fou-Lai; Yang, Kai-Lin

    2015-01-01

    In this study, we aimed at examining Indonesian In-Service primary Teachers' Mathematics Content Knowledge (MCK) and Mathematics Pedagogical Content Knowledge (MPCK) for teaching ratio and proportion. The instruments were administered to 271 in-service primary teachers with various education background. There were three underlined factors on MCK…

  5. Regulation of central dopamine-2 receptor sensitivity by a proportional control thermostat in humans.

    PubMed

    Schwartz, Paul J; Erk, Stanley D

    2004-06-30

    Central dopamine-2 (D2) receptors are importantly involved in the pathogenesis and treatment of schizophrenia. Central D2 receptors are also involved in thermoregulation. Recently, a type of central nervous system proportional control thermostat was described that governs the magnitude of several serotonin receptor-mediated core body thermoregulatory responses in proportion to both the amount of nocturnal melatonin secreted and the minimum level of nocturnal core body temperature (Tmin). The present study investigated whether the magnitude of D2 receptor-mediated hypothermia--a putative index of central D2 receptor sensitivity--is also regulated by this proportional control thermostat in humans. Twenty healthy subjects had their 02:00 h melatonin concentrations (MT2am) and Tmin measured during consecutive sleep episodes and their core body temperature responses (TAUC) measured the next two mornings after oral ingestion of either the D2 receptor agonist bromocriptine 3.125 mg or placebo. We found that the bromocriptine-induced TAUC was significantly and independently correlated with both Tmin and MT2am. In conclusion, D2 receptor-mediated hypothermia, an index of central D2 receptor sensitivity, is regulated by a proportional control thermostat in humans. The abnormal D2 receptor function in schizophrenia could be related to dysfunction of this thermostat.

  6. Legume proportions, poultry litter, and tillage effects on cover crop decomposition

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Hairy vetch (Vicia villosa Roth.)–cereal rye (Secale cereale L.) cover crop mixtures can provide N scavenging and N provisioning benefits in grain cropping systems. The objectives of this research were to determine, under field conditions, the effects of species proportions, tillage, and pelletized...

  7. Didactical Designs for Students' Proportional Reasoning: An "Open Approach" Lesson and a "Fundamental Situation"

    ERIC Educational Resources Information Center

    Miyakawa, Takeshi; Winslow, Carl

    2009-01-01

    In this paper, we analyze and compare two didactical designs for introducing primary school pupils to proportional reasoning in the context of plane polygons. One of them is well-documented in the literature; the other one is based on our own data and is accordingly presented and discussed in more detail in this paper. The two designs come from…

  8. Phylogenetic Tree Reconstruction Accuracy and Model Fit when Proportions of Variable Sites Change across the Tree

    PubMed Central

    Grievink, Liat Shavit; Penny, David; Hendy, Michael D.; Holland, Barbara R.

    2010-01-01

    Commonly used phylogenetic models assume a homogeneous process through time in all parts of the tree. However, it is known that these models can be too simplistic as they do not account for nonhomogeneous lineage-specific properties. In particular, it is now widely recognized that as constraints on sequences evolve, the proportion and positions of variable sites can vary between lineages causing heterotachy. The extent to which this model misspecification affects tree reconstruction is still unknown. Here, we evaluate the effect of changes in the proportions and positions of variable sites on model fit and tree estimation. We consider 5 current models of nucleotide sequence evolution in a Bayesian Markov chain Monte Carlo framework as well as maximum parsimony (MP). We show that for a tree with 4 lineages where 2 nonsister taxa undergo a change in the proportion of variable sites tree reconstruction under the best-fitting model, which is chosen using a relative test, often results in the wrong tree. In this case, we found that an absolute test of model fit is a better predictor of tree estimation accuracy. We also found further evidence that MP is not immune to heterotachy. In addition, we show that increased sampling of taxa that have undergone a change in proportion and positions of variable sites is critical for accurate tree reconstruction. PMID:20525636

  9. Seventh Grade Students' Problem Solving Success Rates on Proportional Reasoning Problems

    ERIC Educational Resources Information Center

    Pelen, Mustafa Serkan; Artut, Perihan Dinç

    2016-01-01

    This research was conducted to investigate 7th grade students' problem solving success rates on proportional reasoning problems and whether these success rates change with different problem types. 331 randomly selected students of grade seven participated in this study. A problem test which contains three different types of missing value (direct…

  10. Teen Court Referral, Sentencing, and Subsequent Recidivism: Two Proportional Hazards Models and a Little Speculation

    ERIC Educational Resources Information Center

    Rasmussen, Andrew

    2004-01-01

    This study extends literature on recidivism after teen court to add system-level variables to demographic and sentence content as relevant covariates. Interviews with referral agents and survival analysis with proportional hazards regression supplement quantitative models that include demographic, sentencing, and case-processing variables in a…

  11. On Testing the Equality of Proportions in the Paired Case with Incomplete Data.

    ERIC Educational Resources Information Center

    Ekbohm, Gunnar

    1982-01-01

    The problem of testing two correlated proportions with incomplete data is considered by means of Monte Carlo simulations studies. A test proposed in this paper, which can be regarded as a generalization of McNemar's test, is recommended in all cases with incomplete data and not too small samples. (Author)

  12. 5 CFR 842.1009 - Elections of retirement coverage, exclusions from retirement coverage, and proportional annuity...

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 5 Administrative Personnel 2 2013-01-01 2013-01-01 false Elections of retirement coverage, exclusions from retirement coverage, and proportional annuity computations. 842.1009 Section 842.1009... EMPLOYEES RETIREMENT SYSTEM-BASIC ANNUITY Customs and Border Protection Officers § 842.1009 Elections...

  13. 5 CFR 831.1612 - Elections of Retirement Coverage, exclusions from retirement coverage, and proportional annuity...

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 5 Administrative Personnel 2 2014-01-01 2014-01-01 false Elections of Retirement Coverage, exclusions from retirement coverage, and proportional annuity computations. 831.1612 Section 831.1612...) RETIREMENT Customs and Border Protection Officers § 831.1612 Elections of Retirement Coverage,...

  14. 5 CFR 842.1009 - Elections of retirement coverage, exclusions from retirement coverage, and proportional annuity...

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 5 Administrative Personnel 2 2014-01-01 2014-01-01 false Elections of retirement coverage, exclusions from retirement coverage, and proportional annuity computations. 842.1009 Section 842.1009... EMPLOYEES RETIREMENT SYSTEM-BASIC ANNUITY Customs and Border Protection Officers § 842.1009 Elections...

  15. 5 CFR 831.1612 - Elections of Retirement Coverage, exclusions from retirement coverage, and proportional annuity...

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 5 Administrative Personnel 2 2012-01-01 2012-01-01 false Elections of Retirement Coverage, exclusions from retirement coverage, and proportional annuity computations. 831.1612 Section 831.1612...) RETIREMENT Customs and Border Protection Officers § 831.1612 Elections of Retirement Coverage,...

  16. 5 CFR 842.1009 - Elections of retirement coverage, exclusions from retirement coverage, and proportional annuity...

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 5 Administrative Personnel 2 2012-01-01 2012-01-01 false Elections of retirement coverage, exclusions from retirement coverage, and proportional annuity computations. 842.1009 Section 842.1009... EMPLOYEES RETIREMENT SYSTEM-BASIC ANNUITY Customs and Border Protection Officers § 842.1009 Elections...

  17. 5 CFR 831.1612 - Elections of Retirement Coverage, exclusions from retirement coverage, and proportional annuity...

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 5 Administrative Personnel 2 2013-01-01 2013-01-01 false Elections of Retirement Coverage, exclusions from retirement coverage, and proportional annuity computations. 831.1612 Section 831.1612...) RETIREMENT Customs and Border Protection Officers § 831.1612 Elections of Retirement Coverage,...

  18. Coaxial anode for background suppression in X-ray proportional counters

    NASA Technical Reports Server (NTRS)

    Bunner, A. N.; Kraushaar, W. L.; Mccammon, D.; Vanderhill, M.; Williamson, F.

    1972-01-01

    A scheme which permits the ends (near the anode seals) as well as the bottom and sides of an X-ray astronomy proportional counter to be protected by anticoincidence guard counters is described. A rocket-borne test showed that the non-X-ray background is reduced by an additional factor of about 30 when the end guard counter feature is added.

  19. The calculation of proportional counter energy-deposition spectra from experimental data.

    NASA Technical Reports Server (NTRS)

    Steigerwalt, J. E.; Baily, N. A.

    1973-01-01

    The experimental approach considered requires the measurement of energy-absorption distributions for a set of pathlengths which define a biological volume. A suitable folding procedure is necessary to produce composite energy-absorption distributions. The investigation is concerned with the quality of the prediction of energy-deposition distributions, taking into account distributions measured with a proportional counter.

  20. Proportionality: Modeling the Future. NASA Connect: Program 6 in the 1999-2000 Series.

    ERIC Educational Resources Information Center

    National Aeronautics and Space Administration, Hampton, VA. Langley Research Center.

    This teaching unit is designed to help students in grades 4-8 explore the concepts of scaling and proportion in the context of spacecraft design. The units in this series have been developed to enhance and enrich mathematics, science, and technology education and to accommodate different teaching and learning styles. Each unit consists of a…

  1. A Simple Activity to Facilitate Proportional Reasoning in the Contexts of Density, Dissolving, and Nanoparticles

    ERIC Educational Resources Information Center

    Hamed, Kastro

    2008-01-01

    To address the confusion resulting from difficulties with proportional reasoning among preservice physical science students, a cube-assembly activity was used to bring a sense of concreteness to abstract ideas. The activity took students from the concrete step of assembling cubes of various sizes and directly measuring their properties to slightly…

  2. Two Perspectives on Proportional Relationships: Extending Complementary Origins of Multiplication in Terms of Quantities

    ERIC Educational Resources Information Center

    Beckmann, Sybilla; Izsák, Andrew

    2015-01-01

    In this article, we present a mathematical analysis that distinguishes two distinct quantitative perspectives on ratios and proportional relationships: variable number of fixed quantities and fixed numbers of variable parts. This parallels the distinction between measurement and partitive meanings for division and between two meanings for…

  3. Proportional Transaction Costs in the Robust Control Approach to Option Pricing: The Uniqueness Theorem

    SciTech Connect

    El Farouq, Naïma; Bernhard, Pierre

    2015-10-15

    We prove the missing uniqueness theorem for the viscosity solution of a quasi-variational inequality related to a minimax impulse control problem modeling the option pricing with proportional transactions costs. This result makes our robust control approach of option pricing in the interval market model essentially complete.

  4. Automatic corn-soybean classification using Landsat MSS data. I - Near-harvest crop proportion estimation. II - Early season crop proportion estimation

    NASA Technical Reports Server (NTRS)

    Badhwar, G. D.

    1984-01-01

    The techniques used initially for the identification of cultivated crops from Landsat imagery depended greatly on the iterpretation of film products by a human analyst. This approach was not very effective and objective. Since 1978, new methods for crop identification are being developed. Badhwar et al. (1982) showed that multitemporal-multispectral data could be reduced to a simple feature space of alpha and beta and that these features would separate corn and soybean very well. However, there are disadvantages related to the use of alpha and beta parameters. The present investigation is concerned with a suitable method for extracting the required features. Attention is given to a profile model for crop discrimination, corn-soybean separation using profile parameters, and an automatic labeling (target recognition) method. The developed technique is extended to obtain a procedure which makes it possible to estimate the crop proportion of corn and soybean from Landsat data early in the growing season.

  5. Crack path determination for non-proportional mixed-mode fatigue

    NASA Astrophysics Data System (ADS)

    Highsmith, Shelby, Jr.

    Turbine engine components such as fan and compressor blades experience complex combinations of steady and vibratory loads that lead to in-service cracking in directions that cannot be predicted by current fracture criteria. Accurate crack path predictions are required in order to characterize the risk and extent of damage resulting from liberation of a fractured ligament from rotating components. Under proportional in-phase mixed Mode I/Mode II loading conditions, crack growth direction has been observed in some materials to shift from tensile-dominated Mode I to shear-dominated Mode II or mixed-mode crack growth at higher proportions of initial Mode II loading, but non-proportional loads are not well-characterized. An extensive database of crack growth direction under non-proportional 2-D mixed-mode loading conditions is required to expand crack path prediction models, which are likely to vary between alloys. An approach based on linear elastic fracture mechanics (LEFM) is desired in order to implement the model in crack growth software such as the boundary element-based fracture analysis package FRANC3D. A novel specimen configuration has been designed and analyzed for generation of wide ranges of mixed-mode loading conditions in a single test. This specimen and a more conventional thin-walled tubular specimen have been used to test polycrystalline nickel-base superalloy Inconel 718 under proportional in-phase and 3 kinds of non-proportional fatigue loading. Stress intensity factors for the various configurations have been analyzed with FRANC3D. Modal transition from Mode I (tensile) to Mode II (shear) crack branching has been observed in several load cases. Qualitative microscopy of fracture surfaces was used to characterize the crack growth behavior. An LEFM approach based on an effective stress intensity factor range, which incorporates the maximum value and range of each appropriate stress intensity (Mode I or Mode II), has been used to successfully predict

  6. Sweet gas

    NASA Astrophysics Data System (ADS)

    Showstack, Randy

    When poisonous hydrogen sulfide contaminates a natural gas deposit, the drilling company usually caps the well and moves on to other areas that may contain larger reserves and offer stronger economic incentives. Chemical and biological methods exist to purify these wells, but most are complex and costly. However, a group of scientists now is developing what could be a cheaper, easier method to clean up and utilize this polluted natural gas.The technique—which involves growing “enrichment” cultures of bacteria that metabolize the hydrogen sulfide into harmless compounds—could be particularly useful to poor and energy-starved developing nations, says Norman Wainwright, a senior scientist at the Woods Hole Marine Biological Laboratory. “We're hoping the technique can be robust enough and inexpensive enough to be used in a developing country,” Wainwright says. Other scientists involved with the project are Porter Anderson, a University of Rochester professor emeritus associated with the lab and Ben Ebenhack, also of Rochester.

  7. Ontogenetic changes in limb bone structural proportions in mountain gorillas (Gorilla beringei beringei).

    PubMed

    Ruff, Christopher B; Burgess, M Loring; Bromage, Timothy G; Mudakikwa, Antoine; McFarlin, Shannon C

    2013-12-01

    Behavioral studies indicate that adult mountain gorillas (Gorilla beringei) are the most terrestrial of all nonhuman hominoids, but that infant mountain gorillas are much more arboreal. Here we examine ontogenetic changes in diaphyseal strength and length of the femur, tibia, humerus, radius, and ulna in 30 Virunga mountain gorillas, including 18 immature specimens and 12 adults. Comparisons are also made with 14 adult western lowland gorillas (Gorilla gorilla gorilla), which are known to be more arboreal than adult mountain gorillas. Infant mountain gorillas have significantly stronger forelimbs relative to hind limbs than older juveniles and adults, but are nonsignificantly different from western lowland gorilla adults. The change in inter-limb strength proportions is abrupt at about two years of age, corresponding to the documented transition to committed terrestrial quadrupedalism in mountain gorillas. The one exception is the ulna, which shows a gradual increase in strength relative to the radius and other long bones during development, possibly corresponding to the gradual adoption of stereotypical fully pronated knuckle-walking in older juvenile gorillas. Inter-limb bone length proportions show a contrasting developmental pattern, with hind limb/forelimb length declining rapidly from birth to five months of age, and then showing no consistent change through adulthood. The very early change in length proportions, prior to significant independent locomotion, may be related to the need for relatively long forelimbs for climbing in a large-bodied hominoid. Virunga mountain gorilla older juveniles and adults have equal or longer forelimb relative to hind limb bones than western lowland adults. These findings indicate that both ontogenetically and among closely related species of Gorilla, long bone strength proportions better reflect actual locomotor behavior than bone length proportions.

  8. Leg Length, Body Proportion, and Health: A Review with a Note on Beauty

    PubMed Central

    Bogin, Barry; Varela-Silva, Maria Inês

    2010-01-01

    Decomposing stature into its major components is proving to be a useful strategy to assess the antecedents of disease, morbidity and death in adulthood. Human leg length (femur + tibia), sitting height (trunk length + head length) and their proportions, for example, (leg length/stature), or the sitting height ratio (sitting height/stature × 100), among others) are associated with epidemiological risk for overweight (fatness), coronary heart disease, diabetes, liver dysfunction and certain cancers. There is also wide support for the use of relative leg length as an indicator of the quality of the environment for growth during infancy, childhood and the juvenile years of development. Human beings follow a cephalo-caudal gradient of growth, the pattern of growth common to all mammals. A special feature of the human pattern is that between birth and puberty the legs grow relatively faster than other post-cranial body segments. For groups of children and youth, short stature due to relatively short legs (i.e., a high sitting height ratio) is generally a marker of an adverse environment. The development of human body proportions is the product of environmental x genomic interactions, although few if any specific genes are known. The HOXd and the short stature homeobox-containing gene (SHOX) are genomic regions that may be relevant to human body proportions. For example, one of the SHOX related disorders is Turner syndrome. However, research with non-pathological populations indicates that the environment is a more powerful force influencing leg length and body proportions than genes. Leg length and proportion are important in the perception of human beauty, which is often considered a sign of health and fertility. PMID:20617018

  9. Influences of limb proportions and body size on locomotor kinematics in terrestrial primates and fossil hominins.

    PubMed

    Polk, J D

    2004-10-01

    During locomotion, mammalian limb postures are influenced by many factors including the animal's limb length and body mass. Polk (2002) compared the gait of similar-sized cercopithecine monkeys that differed limb proportions and found that longer-limbed monkeys usually adopt more extended joint postures than shorter-limbed monkeys in order to moderate their joint moments. Studies of primates as well as non-primate mammals that vary in body mass have demonstrated that larger animals use more extended limb postures than smaller animals. Such extended postures in larger animals increase the extensor muscle mechanical advantage and allow postures to be maintained with relatively less muscular effort (Polk, 2002; Biewener 1989). The results of these previous studies are used here to address two anthropological questions. The first concerns the postural effects of body mass and limb proportion differences between australopithecines and members of the genus Homo. That is, H. erectus and later hominins all have larger body mass and longer legs than australopithecines, and these anatomical differences suggest that Homo probably used more extended postures and probably required relatively less muscular force to resist gravity than the smaller and shorter-limbed australopithecines. The second question investigates how animals with similar size but different limb proportions differ in locomotor performance. The effects of limb proportions on gait are relevant to inferring postural and locomotor differences between Neanderthals and modern Homo sapiens which differ in their crural indices and relative limb length. This study demonstrates that primates with relatively long limbs achieve higher walking speeds while using lower stride frequencies and lower angular excursions than shorter-limbed monkeys, and these kinematic differences may allow longer-limbed taxa to locomote more efficiently than shorter-limbed species of similar mass. Such differences may also have characterized

  10. Leg length, body proportion, and health: a review with a note on beauty.

    PubMed

    Bogin, Barry; Varela-Silva, Maria Inês

    2010-03-01

    Decomposing stature into its major components is proving to be a useful strategy to assess the antecedents of disease, morbidity and death in adulthood. Human leg length (femur + tibia), sitting height (trunk length + head length) and their proportions, for example, (leg length/stature), or the sitting height ratio (sitting height/stature x 100), among others) are associated with epidemiological risk for overweight (fatness), coronary heart disease, diabetes, liver dysfunction and certain cancers. There is also wide support for the use of relative leg length as an indicator of the quality of the environment for growth during infancy, childhood and the juvenile years of development. Human beings follow a cephalo-caudal gradient of growth, the pattern of growth common to all mammals. A special feature of the human pattern is that between birth and puberty the legs grow relatively faster than other post-cranial body segments. For groups of children and youth, short stature due to relatively short legs (i.e., a high sitting height ratio) is generally a marker of an adverse environment. The development of human body proportions is the product of environmental x genomic interactions, although few if any specific genes are known. The HOXd and the short stature homeobox-containing gene (SHOX) are genomic regions that may be relevant to human body proportions. For example, one of the SHOX related disorders is Turner syndrome. However, research with non-pathological populations indicates that the environment is a more powerful force influencing leg length and body proportions than genes. Leg length and proportion are important in the perception of human beauty, which is often considered a sign of health and fertility.

  11. Development and Application of a Two-Tier Diagnostic Instrument to Assess Middle-Years Students' Proportional Reasoning

    ERIC Educational Resources Information Center

    Hilton, Annette; Hilton, Geoff; Dole, Shelley; Goos, Merrilyn

    2013-01-01

    Proportional reasoning involves the use of ratios in the comparison of quantities. While it is a key aspect of numeracy, particularly in the middle years of schooling, students do not always develop proportional reasoning naturally. Research suggests that many students do not apply proportional methods appropriately and that they often erroneously…

  12. Duplex multiwire proportional x-ray detector for multichord time-resolved soft x-ray and electron temperature measurements on T-10 tokamaka)

    NASA Astrophysics Data System (ADS)

    Sushkov, A. V.; Andreev, V. F.; Kravtsov, D. E.

    2008-10-01

    Compact 64-channel multiwire proportional chamber is successfully used on T-10 and TCV tokamaks as a continuous-current soft x-ray detectors. The duplex multiwire proportional x-ray detector is a new generation of these detectors. It has been designed for simultaneous multichord measurement of plasma soft x-ray emissivity in a two spectral ranges and determination of the electron temperature by the two-absorber method. The detector consists of two identical multiwire proportional chambers filled by 90%Kr+10%CH4 gas mixture at atmospheric pressure. The first multiwire chamber has 64 channels. The second multiwire chamber (installed behind the first one) has 32 channels. Both chambers view the plasma through the one helium-filled slot-hole camera. Thus, the first multiwire chamber serves as an absorber filter for the second one. Such construction of the detector allows us in addition to soft x-ray measurements to provide measurement of the plasma core electron temperature with spatial resolution of about 2cm and a time resolution of less than 50μs. The construction of the detector and experimental results illustrating the potential of the diagnostic are presented.

  13. 40 CFR 761.302 - Proportion of the total surface area to sample.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... surfaces. For small surfaces having irregular contours, such as hand tools, natural gas pipeline valves, and most exterior surfaces of machine tools, sample the entire surface. Any person may select...

  14. 40 CFR 761.302 - Proportion of the total surface area to sample.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... surfaces. For small surfaces having irregular contours, such as hand tools, natural gas pipeline valves, and most exterior surfaces of machine tools, sample the entire surface. Any person may select...

  15. 40 CFR 761.302 - Proportion of the total surface area to sample.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... surfaces. For small surfaces having irregular contours, such as hand tools, natural gas pipeline valves, and most exterior surfaces of machine tools, sample the entire surface. Any person may select...

  16. Dielectric gas mixtures containing sulfur hexafluoride

    DOEpatents

    Cooke, Chathan M.

    1979-01-01

    Electrically insulating gaseous media of unexpectedly high dielectric strength comprised of mixtures of two or more dielectric gases are disclosed wherein the dielectric strength of at least one gas in each mixture increases at less than a linear rate with increasing pressure and the mixture gases are present in such proportions that the sum of their electrical discharge voltages at their respective partial pressures exceeds the electrical discharge voltage of each individual gas at the same temperature and pressure as that of the mixture.

  17. Controlling Gas-Flow Mass Ratios

    NASA Technical Reports Server (NTRS)

    Morris, Brian G.

    1990-01-01

    Proposed system automatically controls proportions of gases flowing in supply lines. Conceived for control of oxidizer-to-fuel ratio in new gaseous-propellant rocket engines. Gas-flow control system measures temperatures and pressures at various points. From data, calculates control voltages for electronic pressure regulators for oxygen and hydrogen. System includes commercially available components. Applicable to control of mass ratios in such gaseous industrial processes as chemical-vapor depostion of semiconductor materials and in automotive engines operating on compressed natural gas.

  18. Proportional assist ventilation decreases thoracoabdominal asynchrony and chest wall distortion in preterm infants.

    PubMed

    Musante, G; Schulze, A; Gerhardt, T; Everett, R; Claure, N; Schaller, P; Bancalari, E

    2001-02-01

    Thoracoabdominal asynchrony (TAA) and chest wall distortion (CWD) are commonly seen in preterm infants secondary to a highly compliant rib cage and poor compensation of distorting forces by inspiratory rib cage muscles. Continuous positive airway pressure (CPAP) reduces TAA and CWD by stenting the chest wall. We hypothesized that application of positive airway pressure only during inspiration and in proportion to an infant's inspiratory effort should have a similar but more pronounced effect than CPAP alone. A ventilator providing airway pressure changes in proportion to flow and volume generated by an infant (proportional assist ventilation) was used to unload the respiratory pump during inspiration. Ten preterm infants were studied [birth weight, 745 (635-1175) g; gestational age, 26.5 (24-31) wk; postnatal age 3 (1-7) d; medium (range)]. TAA and CWD were determined by respiratory inductive plethysmography. TAA was expressed as the phase angle between the rib cage and abdominal motion and CWD as the total compartmental displacement ratio. In addition, we measured tidal volume with a pneumotachograph and esophageal and airway pressure deflections with pressure transducers. Measurements were obtained during alternating periods of CPAP and two different degrees of support (Gain 1 = 1.09 +/- 0.68, Gain 2 = 1.84 +/- 0.84 cm H(2)O/mL) that were provided by a proportional assist ventilator. Phase angle and the total compartmental displacement ratio decreased with increasing gain compared with CPAP alone. Peak airway pressure increased from 0.6 to 3.8 to 7.6 cm H(2)O above positive end-expiratory pressure (PEEP) with CPAP, Gain 1, and Gain 2, respectively, as tidal volume increased from 2.8 to 4.1 to 4.7 mL/kg. Esophageal pressure changes decreased only little with increasing gain. Chest wall excursion increased and abdominal movement decreased, indicating a redistribution of tidal volume between chest and abdomen. We conclude that proportional assist ventilation reduces

  19. Social Markers of Mild Cognitive Impairment: Proportion of Word Counts in Free Conversational Speech

    PubMed Central

    Dodge, Hiroko H.; Mattek, Nora; Gregor, Mattie; Bowman, Molly; Seelye, Adriana; Ybarra, Oscar; Asgari, Meysam; Kaye, Jeffrey A.

    2015-01-01

    Background: Detecting early signs of Alzheimer’s disease (AD) and mild cognitive impairment (MCI) during the pre-symptomatic phase is becoming increasingly important for cost-effective clinical trials and also for deriving maximum benefit from currently available treatment strategies. However, distinguishing early signs of MCI from normal cognitive aging is difficult. Biomarkers have been extensively examined as early indicators of the pathological process for AD, but assessing these biomarkers is expensive and challenging to apply widely among pre-symptomatic community dwelling older adults. Here we propose assessment of social markers, which could provide an alternative or complementary and ecologically valid strategy for identifying the pre-symptomatic phase leading to MCI and AD. Methods: The data came from a larger randomized controlled clinical trial (RCT), where we examined whether daily conversational interactions using remote video telecommunications software could improve cognitive functions of older adult participants. We assessed the proportion of words generated by participants out of total words produced by both participants and staff interviewers using transcribed conversations during the intervention trial as an indicator of how two people (participants and interviewers) interact with each other in one-on-one conversations. We examined whether the proportion differed between those with intact cognition and MCI, using first, generalized estimating equations with the proportion as outcome, and second, logistic regression models with cognitive status as outcome in order to estimate the area under ROC curve (ROC AUC). Results: Compared to those with normal cognitive function, MCI participants generated a greater proportion of words out of the total number of words during the timed conversation sessions (p=0.01). This difference remained after controlling for participant age, gender, interviewer and time of assessment (p=0.03). The logistic regression

  20. Fuel gas conditioning process

    DOEpatents

    Lokhandwala, Kaaeid A.

    2000-01-01

    A process for conditioning natural gas containing C.sub.3+ hydrocarbons and/or acid gas, so that it can be used as combustion fuel to run gas-powered equipment, including compressors, in the gas field or the gas processing plant. Compared with prior art processes, the invention creates lesser quantities of low-pressure gas per unit volume of fuel gas produced. Optionally, the process can also produce an NGL product.

  1. Statistical inference for response adaptive randomization procedures with adjusted optimal allocation proportions.

    PubMed

    Zhu, Hongjian

    2016-12-12

    Seamless phase II/III clinical trials have attracted increasing attention recently. They mainly use Bayesian response adaptive randomization (RAR) designs. There has been little research into seamless clinical trials using frequentist RAR designs because of the difficulty in performing valid statistical inference following this procedure. The well-designed frequentist RAR designs can target theoretically optimal allocation proportions, and they have explicit asymptotic results. In this paper, we study the asymptotic properties of frequentist RAR designs with adjusted target allocation proportions, and investigate statistical inference for this procedure. The properties of the proposed design provide an important theoretical foundation for advanced seamless clinical trials. Our numerical studies demonstrate that the design is ethical and efficient.

  2. Performance Improvement of Proportional Fairness-Based Resource Allocation in OFDMA Downlink Systems

    NASA Astrophysics Data System (ADS)

    Ruangchaijatupon, Nararat; Ji, Yusheng

    We have developed a novel downlink packet scheduling scheme for a multiuser OFDMA system in which a subchannel can be time-multiplexed among multiple users. This scheme which is called Matrixed-based Proportional Fairness can provide a high system throughput while ensuring fairness. The scheme is based on a Proportional Fairness (PF) utility function and can be applied to any of the PF-based schedulers. Our scheduler explores multichannel multiuser diversity by using a two-dimensional matrix combining user selection, subchannel assignment, and time slot allocation. Furthermore, unlike other PF-based schemes, our scheme considers finitely backlogged queues during the time slot allocation. By doing so, it can exploit multichannel multiuser diversity to utilize bandwidth efficiently and with throughput fairness. Additionally, fairness in the time domain is enhanced by limiting the number of allocated time slots. Intensive simulations considering finitely backlogged queues and user mobility prove the scheme's effectiveness.

  3. Unit fractions in the context of proportionality: supporting students' reasoning about the inverse order relationship

    NASA Astrophysics Data System (ADS)

    Cortina, Jose Luis; Visnovska, Jana; Zuniga, Claudia

    2014-03-01

    We analyze a classroom design experiment, conducted in a fourth grade classroom, that served to explore an instructional path in which the introduction of unit fractions and supporting proportional reasoning coincide. Central to this path is the use of means of support in which the objects that unit fractions quantify are not characterized as equal-sized parts of a whole, but as entities that are always separate from a reference unit. We argue that such a path is crucial for helping students develop deep quantitative understandings of fractions, where fraction quantities are, from the very start, linked to the reciprocal and multiplicative relations that their use implies. We focus on the first part of the design experiment in which we helped the students make sense of a concept that is important for initial fraction learning and proportional reasoning, the inverse order relationship among unit fractions.

  4. Widespread inhibition proportional to excitation controls the gain of a leech behavioral circuit

    PubMed Central

    Kristan, William B.

    2014-01-01

    SUMMARY Changing gain in a neuronal system has important functional consequences, but the underlying mechanisms have been elusive. Models have suggested a variety of neuronal and systems properties to accomplish gain control. Here, we show that the gain of the neuronal network underlying local bending behavior in leeches depends on widespread inhibition. Using behavioral analysis, intracellular recordings, and voltage-sensitive dye imaging, we compared the effects of blocking just the known lateral inhibition with blocking all GABAergic inhibition. This revealed an additional source of inhibition, which was widespread and increased in proportion to increasing stimulus intensity. In a model of the input/output functions of the three-layered local bending network, we showed that inhibiting all interneurons in proportion to the stimulus strength produces the experimentally observed change in gain. This relatively simple mechanism for controlling behavioral gain could be prevalent in vertebrate as well as invertebrate nervous systems. PMID:18215624

  5. Estimating the proportion of variation in susceptibility to multiple sclerosis captured by common SNPs

    NASA Astrophysics Data System (ADS)

    Watson, Corey T.; Disanto, Giulio; Breden, Felix; Giovannoni, Gavin; Ramagopalan, Sreeram V.

    2012-10-01

    Multiple sclerosis (MS) is a complex disease with underlying genetic and environmental factors. Although the contribution of alleles within the major histocompatibility complex (MHC) are known to exert strong effects on MS risk, much remains to be learned about the contributions of loci with more modest effects identified by genome-wide association studies (GWASs), as well as loci that remain undiscovered. We use a recently developed method to estimate the proportion of variance in disease liability explained by 475,806 single nucleotide polymorphisms (SNPs) genotyped in 1,854 MS cases and 5,164 controls. We reveal that ~30% of MS genetic liability is explained by SNPs in this dataset, the majority of which is accounted for by common variants. These results suggest that the unaccounted for proportion could be explained by variants that are in imperfect linkage disequilibrium with common GWAS SNPs, highlighting the potential importance of rare variants in the susceptibility to MS.

  6. A quasi-modal parameter based system identification procedure with non-proportional hysteretic damping

    NASA Astrophysics Data System (ADS)

    Yu, Minli; Hahn, Eric J.; Liu, Jike; Lu, Zhongrong

    2016-11-01

    This paper introduced a modal parameter based identification procedure to identify the equivalent system of structures under harmonic excitations. The developed identification technique assumed non-proportional hysteretic damping in the equivalent system, which would be applicable in identifying more general structures. By introducing quasi-modal parameter, modal analysis equation was decoupled under physical coordinate; hence, the modal parameters of each vibration mode are identified independently. Double iteration algorithm was developed to solve the derived non-linear identification equation with complex unknowns. The developed identification procedure was applied to identify the equivalent system of a numerical model in order to evaluate the feasibility of the technique in practice. The identification procedure was also applied to identify an experimental mass and bar rig for validation purpose. Identification results showed that the identification procedure could identify accurately and robustly the equivalent system with non-proportional hysteretic damping assumption; hence, it is likely to be applicable in the field.

  7. Proportion and cluster analyses of the skull in various species of the tree shrews.

    PubMed

    Endo, Hideki; Hikida, Tsutomu; Chou, Loke Ming; Fukuta, Katsuhiro; Stafford, Brian J

    2004-01-01

    The skull adaptation was functional-morphologically examined in 14 species of the tree shrews. From the data of the proportion indices, the similarities were confirmed between T. minor and T. gracilis, T. tana and T. dorsalis, and T. longipes and T. glis. We demonstrated that the splanchnocranium was elongated in terrestrial T. tana and T. dorsalis and shortened in arboreal T. minor and T. gracilis from the proportion data. In both dendrogram from the matrix of the Q-mode correlation coefficients and scattergram from the canonical discriminant analysis, the morphological similarities in the skull shape suggested the terrestrial-insectivorous adaptation of T. tana and T. dorsalis, and the arboreal adaptation of T. minor and T. gracilis. Since the osteometrical skull similarities were indicated among the three species of Tupaia by cluster and canonical discriminant analyses, the arbo-terrestrial behavior and its functional-morphological adaptation may be commonly established in T. montana, T. longipes and T. glis.

  8. Calibration methodology for proportional counters applied to yield measurements of a neutron burst.

    PubMed

    Tarifeño-Saldivia, Ariel; Mayer, Roberto E; Pavez, Cristian; Soto, Leopoldo

    2014-01-01

    This paper introduces a methodology for the yield measurement of a neutron burst using neutron proportional counters. This methodology is to be applied when single neutron events cannot be resolved in time by nuclear standard electronics, or when a continuous current cannot be measured at the output of the counter. The methodology is based on the calibration of the counter in pulse mode, and the use of a statistical model to estimate the number of detected events from the accumulated charge resulting from the detection of the burst of neutrons. The model is developed and presented in full detail. For the measurement of fast neutron yields generated from plasma focus experiments using a moderated proportional counter, the implementation of the methodology is herein discussed. An experimental verification of the accuracy of the methodology is presented. An improvement of more than one order of magnitude in the accuracy of the detection system is obtained by using this methodology with respect to previous calibration methods.

  9. Hypothesis tests for and against a simple order among proportions estimated by pooled testing.

    PubMed

    Tebbs, Joshua M; Bilder, Christopher R

    2006-08-01

    The use of pooled testing as a means of estimating the prevalence of rare traits has received considerable attention in recent years, particularly in the areas of public health, genetics, animal-disease assessment, and plant pathology. In pooled-testing applications, observations are made on pools of individuals amalgamated together. In this paper, we examine order-restricted hypothesis tests involving k >2 binomial proportions estimated by pooled testing, extending the earlier work of Tebbs and Swallow (2003, Biometrika, 90, 471-477 and Biometrical Journal, 45, 618-630). In particular, we focus on (i) testing the equality of proportions versus an isotonic alternative and (ii) testing for a violation of isotonicity. We propose new tests for each scenario and provide results which characterize the small-sample performance of our procedures. We illustrate our methods using two data sets; one from an observational HIV study and one from an agricultural experiment.

  10. .981]Design of a Compensator for Proportional Navigation with μ-Synthesis

    NASA Astrophysics Data System (ADS)

    Kumagai, Kenji; Ochi, Yoshimasa

    This paper proposes a design method of a missile guidance system with robust control. The design method provides a compensator for the proportional navigation guidance law, explicitly considering the uncertainties by employing the μ-synthesis, a design method of robust control systems. The proposed method has two features: One is that the plant is modeled so that the feedback signal becomes the same as that of the proportional navigation, i.e., the relative velocity multiplied by the line-of-sight angular rate. The other is that the controlled output is chosen to be the component of the relative velocity perpendicular to the line of sight, instead of the line-of-sight angular rate, which is usually chosen in guidance law design based on modern control. Computer simulation is performed using a two-dimensional engagement model to show the effectiveness of the guidance law.

  11. Marriage Squeeze, Never-Married Proportion, and Mean Age at First Marriage in China.

    PubMed

    Jiang, Quanbao; Feldman, Marcus W; Li, Shuzhuo

    2014-01-01

    China's sex ratio imbalance and the surplus of males have received a great deal of attention, but measures of the extent of the marriage squeeze do not take into account the marital status of population. In this paper, we devise an index of the marriage squeeze for the never-married population and use it to project the male marriage squeeze from 2000 to 2060. From the predicted population and nuptiality tables, we estimate trends in the proportion of men that never marry by age 50 and the mean age at first marriage. We find that the marriage squeeze is much more intense if only the never-married population is considered, rather than including all people without distinguishing their marital status. As the lifelong never-married proportion increases, mean age at first marriage rises first and then declines.

  12. A boron-lined proportional counter (BLPC) used in a mixed field of reactors

    NASA Astrophysics Data System (ADS)

    Chen, Guo-Yun; Wei, Zhi-Yong; Xin, Yong; Lei, Sheng-Jie; Huang, Fu-Cheng; Huang, San-Bo; Zhu, Li; Zhao, Jing-Wu; Ma, Jia-Yi

    2012-05-01

    A boron-lined proportional counter (BLPC) with a count rate limit close to the multi-wire proportional counter was manufactured to measure the mixed field around reactors. After measurement with a standard Am-Be neutron source (activity: 100 mCi), the results show that the operating voltage of the BLPC is 800 V, the plateau length is 100 V and the slope is 13.2%/100 V. The width and rise time of the output pulse of the BLPC are 1.26 μs and 370 ns, respectively. When the BLPC works at a count rate of 1.0×105 count/s, the pulse pile-up probability of the BLPC is 3.6%. A clear peak can be seen in the pulse height spectrum of the BLPC. and the performances illustrate that a BLPC working in pulse mode can serve as a source range detector of reactors.

  13. Comparing proportional hazards and accelerated failure time models for survival analysis.

    PubMed

    Orbe, Jesus; Ferreira, Eva; Núñez-Antón, Vicente

    2002-11-30

    This paper describes a method proposed for a censored linear regression model that can be used in the context of survival analysis. The method has the important characteristic of allowing estimation and inference without knowing the distribution of the duration variable. Moreover, it does not need the assumption of proportional hazards. Therefore, it can be an interesting alternative to the Cox proportional hazards models when this assumption does not hold. In addition, implementation and interpretation of the results is simple. In order to analyse the performance of this methodology, we apply it to two real examples and we carry out a simulation study. We present its results together with those obtained with the traditional Cox model and AFT parametric models. The new proposal seems to lead to more precise results.

  14. Using the proportional hazards model to study heart valve replacement data.

    PubMed

    Bunday, B D; Kiri, V A; Stoodley, K D

    1992-01-01

    The proportional hazards model is used to study the effect of various concomitant variables on the time to valve failure, mortality, or other complications, for patients who have had artificial heart valves inserted. The data are from a database, which is still being assembled as more information is acquired, at Killingbeck Hospital. A suite of computer programs, not specifically developed with this application in mind, has been used to carry out the exploratory data analysis, the estimation of parameters and the validation of the model. These three elements of the analysis are all illustrated. The present report is seen as a preliminary study to assess the usefulness of the proportional hazards model in this area. Follow-up work as more data are accumulated is intended.

  15. Nursing Homes That Increased The Proportion Of Medicare Days Achieved Gains In Quality

    PubMed Central

    Lepore, Michael; Leland, Natalie E.

    2017-01-01

    Nursing homes are increasingly serving short-stay rehabilitation residents under Medicare skilled nursing facility coverage, which is substantially more generous than Medicaid coverage for long-stay residents. In relation to increasing short-stay resident care, potential exists for beneficial or detrimental effects on long-stay resident outcomes. We employ panel multivariate regression analyses using facility fixed-effects models to determine how increasing the proportion of Medicare days in nursing homes relates to changes in quality outcomes for long-stay residents. We find increasing the proportion of Medicare days in a nursing home is significantly associated with improved quality outcomes for long-stay residents. Findings reinforce prior research indicating that quality outcomes tend to be superior in nursing homes with greater financial resources. This study bolsters arguments for financial investments in nursing homes, including increases in Medicaid payment rates, to support better care. PMID:26643633

  16. Retrieving treatment and control proportions from incomplete summary data in meta-analysis.

    PubMed

    Olkin, Ingram

    2012-09-01

    One of the vexing problems often encountered when combining the results of independent studies in a meta-analysis is that the data provided in individual studies are incomplete. Some studies may provide only a risk difference and others only an odds ratio. Of course, if the proportions for treatment and control are reported, then the meta-analyst can carry out a variety of analyses, such as fixed or random effect estimates. Excluding studies with incomplete data carries a risk and should be avoided if it is possible to retrieve the original proportions. Inclusion criteria in some meta-analyses may require that studies contain full data. This requirement can be relaxed if the original data can be retrieved. Copyright © 2012 John Wiley & Sons, Ltd.

  17. A Bayesian Semiparametric Temporally–Stratified Proportional Hazards Model with Spatial Frailties

    PubMed Central

    Hanson, Timothy E.; Jara, Alejandro; Zhao, Luping

    2011-01-01

    Incorporating temporal and spatial variation could potentially enhance information gathered from survival data. This paper proposes a Bayesian semiparametric model for capturing spatio–temporal heterogeneity within the proportional hazards framework. The spatial correlation is introduced in the form of county–level frailties. The temporal effect is introduced by considering the stratification of the proportional hazards model, where the time–dependent hazards are indirectly modeled using a probability model for related probability distributions. With this aim, an autoregressive dependent tailfree process is introduced. The full Kullback–Leibler support of the proposed process is provided. The approach is illustrated using simulated and data from the Surveillance Epidemiology and End Results database of the National Cancer Institute on patients in Iowa diagnosed with breast cancer. PMID:22247752

  18. Regression model estimation of early season crop proportions: North Dakota, some preliminary results

    NASA Technical Reports Server (NTRS)

    Lin, K. K. (Principal Investigator)

    1982-01-01

    To estimate crop proportions early in the season, an approach is proposed based on: use of a regression-based prediction equation to obtain an a priori estimate for specific major crop groups; modification of this estimate using current-year LANDSAT and weather data; and a breakdown of the major crop groups into specific crops by regression models. Results from the development and evaluation of appropriate regression models for the first portion of the proposed approach are presented. The results show that the model predicts 1980 crop proportions very well at both county and crop reporting district levels. In terms of planted acreage, the model underpredicted 9.1 percent of the 1980 published data on planted acreage at the county level. It predicted almost exactly the 1980 published data on planted acreage at the crop reporting district level and overpredicted the planted acreage by just 0.92 percent.

  19. A proportional mortality ratio study of workers in a construction equipment and diesel engine manufacturing plant.

    PubMed

    Mallin, K; Berkeley, L; Young, Q

    1986-01-01

    The mortality of 461 workers who were employed 10 or more years in a Midwest engine and construction equipment plant was examined, using the method of proportional mortality ratios. Both state and national deaths were used as the standard population. Major exposures in this plant included solvents, cutting oils, and metal fumes and dusts. However, precise exposure data were not available. Among white males, no significant deviations from expected deaths were found. Among black males, significant excess deaths were found for all malignant neoplasms combined, for cancer of the pancreas, and for non-Hodgkin's lymphomas. Proportional cancer mortality ratios produced similar results, although the excess of pancreatic cancer in blacks was only significant among those with 20 or more years of service. Although complete occupational histories were not available, these results may provide hypotheses for future studies of workers in heavy machinery production.

  20. Evaluation of fatty proportion in fatty liver using least squares method with constraints.

    PubMed

    Li, Xingsong; Deng, Yinhui; Yu, Jinhua; Wang, Yuanyuan; Shamdasani, Vijay

    2014-01-01

    Backscatter and attenuation parameters are not easily measured in clinical applications due to tissue inhomogeneity in the region of interest (ROI). A least squares method(LSM) that fits the echo signal power spectra from a ROI to a 3-parameter tissue model was used to get attenuation coefficient imaging in fatty liver. Since fat's attenuation value is higher than normal liver parenchyma, a reasonable threshold was chosen to evaluate the fatty proportion in fatty liver. Experimental results using clinical data of fatty liver illustrate that the least squares method can get accurate attenuation estimates. It is proved that the attenuation values have a positive correlation with the fatty proportion, which can be used to evaluate the syndrome of fatty liver.

  1. Design and performance of the new cathode readout proportional chambers in LASS

    SciTech Connect

    Aiken, G.; Aston, D.; Dunwoodie, W.

    1980-10-01

    The design and construction of a new proportional chamber system for the LASS spectrometer are discussed. This system consists of planar and cylindrical chambers employing anode wire and cathode strip readout techniques. The good timing characteristics of anode readout combine with the excellent spatial resolution of cathode readout to provide powerful and compact detectors. Preliminary resolution data are presented along with operating characteristics of the various devices.

  2. Secondary power-producing cell. [electrodes contain same two elements in different proportions

    DOEpatents

    Fischer, A.K.

    1971-10-26

    This cell consists of an anode and a cathode containing the same two elements in different proportions and an electrolyte which contains ions of the element which is to be transported through it. The electrodes consist of chromium, iron, lithium, sodium, cadmium, copper, or zinc and phosphorus, selenium, tellurium, sulfur, arsenic, or nitrogen. A method to heat the cathode in the regeneration cycle to transfer the electronegative component to the anode is provided. (RWR)

  3. Robust estimation of the proportion of treatment effect explained by surrogate marker information.

    PubMed

    Parast, Layla; McDermott, Mary M; Tian, Lu

    2016-05-10

    In randomized treatment studies where the primary outcome requires long follow-up of patients and/or expensive or invasive obtainment procedures, the availability of a surrogate marker that could be used to estimate the treatment effect and could potentially be observed earlier than the primary outcome would allow researchers to make conclusions regarding the treatment effect with less required follow-up time and resources. The Prentice criterion for a valid surrogate marker requires that a test for treatment effect on the surrogate marker also be a valid test for treatment effect on the primary outcome of interest. Based on this criterion, methods have been developed to define and estimate the proportion of treatment effect on the primary outcome that is explained by the treatment effect on the surrogate marker. These methods aim to identify useful statistical surrogates that capture a large proportion of the treatment effect. However, current methods to estimate this proportion usually require restrictive model assumptions that may not hold in practice and thus may lead to biased estimates of this quantity. In this paper, we propose a nonparametric procedure to estimate the proportion of treatment effect on the primary outcome that is explained by the treatment effect on a potential surrogate marker and extend this procedure to a setting with multiple surrogate markers. We compare our approach with previously proposed model-based approaches and propose a variance estimation procedure based on a perturbation-resampling method. Simulation studies demonstrate that the procedure performs well in finite samples and outperforms model-based procedures when the specified models are not correct. We illustrate our proposed procedure using a data set from a randomized study investigating a group-mediated cognitive behavioral intervention for peripheral artery disease participants.

  4. Using random proportional pulse feedback of system variables to control chaos and hyperchaos

    NASA Astrophysics Data System (ADS)

    Luo, Xiao-shu; Wang, Bing-hong; Jiang, Feng; Gao, Yuan

    2001-01-01

    A method that allows one to control chaotic and hyperchaotic systems by a random proportional pulse feedback of system variables is proposed. This method is illustrated with the Rossler chaotic and the complex Lorenz-Harken hyperchaotic systems and a better control result is obtained. The advantage of this method is that just one perturbed system variable is enough to obtain a stabilized periodic orbit.

  5. Discrete Proportional Plus Integral (PI) Multivariable Control Laws for the Control Reconfigurable Combat Aircraft (CRCA)

    DTIC Science & Technology

    1989-12-01

    and perform the maneuvers. The time responses show that discrete PI control law can make the CRCA successfully perform all five maneuvers for two of the...three control surface failures investigated in two of the three point designs. The step response PI control law results in stable control for only...tasks with the NASA/Grumman Control Reconfigurable Combat Aircraft (CRCA). Porter’s method is used to design discrete Proportional plus Integral ( PI

  6. Sources for proportional tube gain variation: What to do about it

    SciTech Connect

    Fukui, Y.; Mishina, M.; Hayashide, Y.; Kanda, S.; Kim, S.; Kondo, K.; Masuzawa, M.; Miyashita, S.; Miyata, H.; Mori, S.

    1985-10-01

    In the high-energy domain systematic uncertainties become a substantial fraction of attainable energy resolution of a proportional tube electromagnetic calorimeter. Sources of nonuniformity and fluctuation of calorimeter response are discussed and test data on the magnitude of the effects are presented. Possible ways of maintaining these effects under control are discussed and test data are discussed which demonstrated that such effects could in fact be monitored and corrected to less than 1%.

  7. Enhanced learning of proportional math through music training and spatial-temporal training.

    PubMed

    Graziano, A B; Peterson, M; Shaw, G L

    1999-03-01

    It was predicted, based on a mathematical model of the cortex, that early music training would enhance spatial-temporal reasoning. We have demonstrated that preschool children given six months of piano keyboard lessons improved dramatically on spatial-temporal reasoning while children in appropriate control groups did not improve. It was then predicted that the enhanced spatial-temporal reasoning from piano keyboard training could lead to enhanced learning of specific math concepts, in particular proportional math, which is notoriously difficult to teach using the usual language-analytic methods. We report here the development of Spatial-Temporal Math Video Game software designed to teach fractions and proportional math, and its strikingly successful use in a study involving 237 second-grade children (age range six years eight months-eight years five months). Furthermore, as predicted, children given piano keyboard training along with the Math Video Game training scored significantly higher on proportional math and fractions than children given a control training along with the Math Video Game. These results were readily measured using the companion Math Video Game Evaluation Program. The training time necessary for children on the Math Video Game is very short, and they rapidly reach a high level of performance. This suggests that, as predicted, we are tapping into fundamental cortical processes of spatial-temporal reasoning. This spatial-temporal approach is easily generalized to teach other math and science concepts in a complementary manner to traditional language-analytic methods, and at a younger age. The neural mechanisms involved in thinking through fractions and proportional math during training with the Math Video Game might be investigated in EEG coherence studies along with priming by specific music.

  8. A mixture Weibull proportional hazard model for mechanical system failure prediction utilising lifetime and monitoring data

    NASA Astrophysics Data System (ADS)

    Zhang, Qing; Hua, Cheng; Xu, Guanghua

    2014-02-01

    As mechanical systems increase in complexity, it is becoming more and more common to observe multiple failure modes. The system failure can be regarded as the result of interaction and competition between different failure modes. It is therefore necessary to combine multiple failure modes when analysing the failure of an overall system. In this paper, a mixture Weibull proportional hazard model (MWPHM) is proposed to predict the failure of a mechanical system with multiple failure modes. The mixed model parameters are estimated by combining historical lifetime and monitoring data of all failure modes. In addition, the system failure probability density is obtained by proportionally mixing the failure probability density of multiple failure modes. Monitoring data are input into the MWPHM to estimate the system reliability and predict the system failure time. A simulated sample set is used to verify the ability of the MWPHM to model multiple failure modes. Finally, the MWPHM and the traditional Weibull proportional hazard model (WPHM) are applied to a high-pressure water descaling pump, which has two failure modes: sealing ring wear and thrust bearing damage. Results show that the MWPHM is greatly superior in system failure prediction to the WPHM.

  9. High proportion of smaller ranged hummingbird species coincides with ecological specialization across the Americas

    PubMed Central

    Martín González, Ana M.; Maruyama, Pietro K.; Sandel, Brody; Vizentin-Bugoni, Jeferson; Schleuning, Matthias; Abrahamczyk, Stefan; Alarcón, Ruben; Araujo, Andréa C.; Araújo, Francielle P.; Mendes de Azevedo, Severino; Baquero, Andrea C.; Cotton, Peter A.; Ingversen, Tanja Toftemark; Kohler, Glauco; Lara, Carlos; Guedes Las-Casas, Flor Maria; Machado, Adriana O.; Machado, Caio Graco; Maglianesi, María Alejandra; Moura, Alan Cerqueira; Nogués-Bravo, David; Oliveira, Genilda M.; Oliveira, Paulo E.; Ornelas, Juan Francisco; Rodrigues, Licléia da Cruz; Rosero-Lasprilla, Liliana; Rui, Ana Maria; Sazima, Marlies; Timmermann, Allan; Varassin, Isabela Galarda; Wang, Zhiheng; Watts, Stella; Fjeldså, Jon; Svenning, Jens-Christian; Rahbek, Carsten; Dalsgaard, Bo

    2016-01-01

    Ecological communities that experience stable climate conditions have been speculated to preserve more specialized interspecific associations and have higher proportions of smaller ranged species (SRS). Thus, areas with disproportionally large numbers of SRS are expected to coincide geographically with a high degree of community-level ecological specialization, but this suggestion remains poorly supported with empirical evidence. Here, we analysed data for hummingbird resource specialization, range size, contemporary climate, and Late Quaternary climate stability for 46 hummingbird–plant mutualistic networks distributed across the Americas, representing 130 hummingbird species (ca 40% of all hummingbird species). We demonstrate a positive relationship between the proportion of SRS of hummingbirds and community-level specialization, i.e. the division of the floral niche among coexisting hummingbird species. This relationship remained strong even when accounting for climate, furthermore, the effect of SRS on specialization was far stronger than the effect of specialization on SRS, suggesting that climate largely influences specialization through species' range-size dynamics. Irrespective of the exact mechanism involved, our results indicate that communities consisting of higher proportions of SRS may be vulnerable to disturbance not only because of their small geographical ranges, but also because of their high degree of specialization. PMID:26842573

  10. Sample Dimensionality Effects on d' and Proportion of Correct Responses in Discrimination Testing.

    PubMed

    Bloom, David J; Lee, Soo-Yeun

    2016-09-01

    Products in the food and beverage industry have varying levels of dimensionality ranging from pure water to multicomponent food products, which can modify sensory perception and possibly influence discrimination testing results. The objectives of the study were to determine the impact of (1) sample dimensionality and (2) complex formulation changes on the d' and proportion of correct response of the 3-AFC and triangle methods. Two experiments were conducted using 47 prescreened subjects who performed either triangle or 3-AFC test procedures. In Experiment I, subjects performed 3-AFC and triangle tests using model solutions with different levels of dimensionality. Samples increased in dimensionality from 1-dimensional sucrose in water solution to 3-dimensional sucrose, citric acid, and flavor in water solution. In Experiment II, subjects performed 3-AFC and triangle tests using 3-dimensional solutions. Sample pairs differed in all 3 dimensions simultaneously to represent complex formulation changes. Two forms of complexity were compared: dilution, where all dimensions decreased in the same ratio, and compensation, where a dimension was increased to compensate for a reduction in another. The proportion of correct responses decreased for both methods when the dimensionality was increased from 1- to 2-dimensional samples. No reduction in correct responses was observed from 2- to 3-dimensional samples. No significant differences in d' were demonstrated between the 2 methods when samples with complex formulation changes were tested. Results reveal an impact on proportion of correct responses due to sample dimensionality and should be explored further using a wide range of sample formulations.

  11. Rate Adaptive Based Resource Allocation with Proportional Fairness Constraints in OFDMA Systems.

    PubMed

    Yin, Zhendong; Zhuang, Shufeng; Wu, Zhilu; Ma, Bo

    2015-09-25

    Orthogonal frequency division multiple access (OFDMA), which is widely used in the wireless sensor networks, allows different users to obtain different subcarriers according to their subchannel gains. Therefore, how to assign subcarriers and power to different users to achieve a high system sum rate is an important research area in OFDMA systems. In this paper, the focus of study is on the rate adaptive (RA) based resource allocation with proportional fairness constraints. Since the resource allocation is a NP-hard and non-convex optimization problem, a new efficient resource allocation algorithm ACO-SPA is proposed, which combines ant colony optimization (ACO) and suboptimal power allocation (SPA). To reduce the computational complexity, the optimization problem of resource allocation in OFDMA systems is separated into two steps. For the first one, the ant colony optimization algorithm is performed to solve the subcarrier allocation. Then, the suboptimal power allocation algorithm is developed with strict proportional fairness, and the algorithm is based on the principle that the sums of power and the reciprocal of channel-to-noise ratio for each user in different subchannels are equal. To support it, plenty of simulation results are presented. In contrast with root-finding and linear methods, the proposed method provides better performance in solving the proportional resource allocation problem in OFDMA systems.

  12. PSHREG: a SAS macro for proportional and nonproportional subdistribution hazards regression.

    PubMed

    Kohl, Maria; Plischke, Max; Leffondré, Karen; Heinze, Georg

    2015-02-01

    We present a new SAS macro %pshreg that can be used to fit a proportional subdistribution hazards model for survival data subject to competing risks. Our macro first modifies the input data set appropriately and then applies SAS's standard Cox regression procedure, PROC PHREG, using weights and counting-process style of specifying survival times to the modified data set. The modified data set can also be used to estimate cumulative incidence curves for the event of interest. The application of PROC PHREG has several advantages, e.g., it directly enables the user to apply the Firth correction, which has been proposed as a solution to the problem of undefined (infinite) maximum likelihood estimates in Cox regression, frequently encountered in small sample analyses. Deviation from proportional subdistribution hazards can be detected by both inspecting Schoenfeld-type residuals and testing correlation of these residuals with time, or by including interactions of covariates with functions of time. We illustrate application of these extended methods for competing risk regression using our macro, which is freely available at: http://cemsiis.meduniwien.ac.at/en/kb/science-research/software/statistical-software/pshreg, by means of analysis of a real chronic kidney disease study. We discuss differences in features and capabilities of %pshreg and the recent (January 2014) SAS PROC PHREG implementation of proportional subdistribution hazards modelling.

  13. New Stability Criteria for High-Order Neural Networks with Proportional Delays

    NASA Astrophysics Data System (ADS)

    Xu, Chang-Jin; Li, Pei-Luan

    2017-03-01

    This paper is concerned with high-order neural networks with proportional delays. The proportional delay is a time-varying unbounded delay which is different from the constant delay, bounded time-varying delay and distributed delay. By the nonlinear transformation {y}i(t)={u}i({{{e}}}t){{ }}(i=1,2,\\ldots ,n), we transform a class of high-order neural networks with proportional delays into a class of high-order neural networks with constant delays and time-varying coefficients. With the aid of Brouwer fixed point theorem and constructing the delay differential inequality, we obtain some delay-independent and delay-dependent sufficient conditions to ensure the existence, uniqueness and global exponential stability of equilibrium of the network. Two examples with their simulations are given to illustrate the theoretical findings. Our results are new and complement previously known results. Supported by National Natural Science Foundation of China under Grant Nos. 61673008 and 11261010, and Project of High-level Innovative Talents of Guizhou Province ([2016]5651)

  14. High proportion of smaller ranged hummingbird species coincides with ecological specialization across the Americas.

    PubMed

    Sonne, Jesper; Martín González, Ana M; Maruyama, Pietro K; Sandel, Brody; Vizentin-Bugoni, Jeferson; Schleuning, Matthias; Abrahamczyk, Stefan; Alarcón, Ruben; Araujo, Andréa C; Araújo, Francielle P; Mendes de Azevedo, Severino; Baquero, Andrea C; Cotton, Peter A; Ingversen, Tanja Toftemark; Kohler, Glauco; Lara, Carlos; Guedes Las-Casas, Flor Maria; Machado, Adriana O; Machado, Caio Graco; Maglianesi, María Alejandra; Moura, Alan Cerqueira; Nogués-Bravo, David; Oliveira, Genilda M; Oliveira, Paulo E; Ornelas, Juan Francisco; Rodrigues, Licléia da Cruz; Rosero-Lasprilla, Liliana; Rui, Ana Maria; Sazima, Marlies; Timmermann, Allan; Varassin, Isabela Galarda; Wang, Zhiheng; Watts, Stella; Fjeldså, Jon; Svenning, Jens-Christian; Rahbek, Carsten; Dalsgaard, Bo

    2016-02-10

    Ecological communities that experience stable climate conditions have been speculated to preserve more specialized interspecific associations and have higher proportions of smaller ranged species (SRS). Thus, areas with disproportionally large numbers of SRS are expected to coincide geographically with a high degree of community-level ecological specialization, but this suggestion remains poorly supported with empirical evidence. Here, we analysed data for hummingbird resource specialization, range size, contemporary climate, and Late Quaternary climate stability for 46 hummingbird-plant mutualistic networks distributed across the Americas, representing 130 hummingbird species (ca 40% of all hummingbird species). We demonstrate a positive relationship between the proportion of SRS of hummingbirds and community-level specialization, i.e. the division of the floral niche among coexisting hummingbird species. This relationship remained strong even when accounting for climate, furthermore, the effect of SRS on specialization was far stronger than the effect of specialization on SRS, suggesting that climate largely influences specialization through species' range-size dynamics. Irrespective of the exact mechanism involved, our results indicate that communities consisting of higher proportions of SRS may be vulnerable to disturbance not only because of their small geographical ranges, but also because of their high degree of specialization.

  15. Multi-parameter regression survival modeling: An alternative to proportional hazards.

    PubMed

    Burke, K; MacKenzie, G

    2016-11-28

    It is standard practice for covariates to enter a parametric model through a single distributional parameter of interest, for example, the scale parameter in many standard survival models. Indeed, the well-known proportional hazards model is of this kind. In this article, we discuss a more general approach whereby covariates enter the model through more than one distributional parameter simultaneously (e.g., scale and shape parameters). We refer to this practice as "multi-parameter regression" (MPR) modeling and explore its use in a survival analysis context. We find that multi-parameter regression leads to more flexible models which can offer greater insight into the underlying data generating process. To illustrate the concept, we consider the two-parameter Weibull model which leads to time-dependent hazard ratios, thus relaxing the typical proportional hazards assumption and motivating a new test of proportionality. A novel variable selection strategy is introduced for such multi-parameter regression models. It accounts for the correlation arising between the estimated regression coefficients in two or more linear predictors-a feature which has not been considered by other authors in similar settings. The methods discussed have been implemented in the mpr package in R.

  16. Application of orthogonal test method in mix proportion design of recycled lightweight aggregate concrete

    NASA Astrophysics Data System (ADS)

    Zhao, Zhanshan; An, Le; Zhang, Yijing; Yuan, Jie

    2017-03-01

    Recycled lightweight aggregate concrete was made with construction waste and ceramsite brick mainly including brick. Using the orthogonal test method, the mix proportion of recycled lightweight aggregate concrete was studied, and the Influence regularity and significance of water binder ratio, fly ash, sand ratio, the amount of recycled aggregate proportion on the compressive strength of concrete, the strong influence of mass ratio, slump expansion degree was studied. Through the mean and range analysis of the test results, the results show that the water binder ratio has the greatest influence on the 28d intensity of recycled lightweight aggregate concrete. Secondly, the fly ash content, the recycled aggregate replacement rate and the sand ratio have little influence. For the factors of expansion: the proportion of fly ash = water binder ratio sand >sand rate> recycled aggregate replacement rate. When the content of fly ash is about 30%, the expanded degree of recycled lightweight aggregate concrete is the highest, and the workability of that is better and the strength of concrete with 28d and 56d are the highest. When the content of brickbat is about 40% brick particles, the strength of concrete reaches the highest.

  17. A novel nonparametric confidence interval for differences of proportions for correlated binary data.

    PubMed

    Duan, Chongyang; Cao, Yingshu; Zhou, Lizhi; Tan, Ming T; Chen, Pingyan

    2016-11-16

    Various confidence interval estimators have been developed for differences in proportions resulted from correlated binary data. However, the width of the mostly recommended Tango's score confidence interval tends to be wide, and the computing burden of exact methods recommended for small-sample data is intensive. The recently proposed rank-based nonparametric method by treating proportion as special areas under receiver operating characteristic provided a new way to construct the confidence interval for proportion difference on paired data, while the complex computation limits its application in practice. In this article, we develop a new nonparametric method utilizing the U-statistics approach for comparing two or more correlated areas under receiver operating characteristics. The new confidence interval has a simple analytic form with a new estimate of the degrees of freedom of n - 1. It demonstrates good coverage properties and has shorter confidence interval widths than that of Tango. This new confidence interval with the new estimate of degrees of freedom also leads to coverage probabilities that are an improvement on the rank-based nonparametric confidence interval. Comparing with the approximate exact unconditional method, the nonparametric confidence interval demonstrates good coverage properties even in small samples, and yet they are very easy to implement computationally. This nonparametric procedure is evaluated using simulation studies and illustrated with three real examples. The simplified nonparametric confidence interval is an appealing choice in practice for its ease of use and good performance.

  18. Quantifying the proportion of tile-drained land in large river basins

    NASA Astrophysics Data System (ADS)

    Hirt, Ulrike; Volk, Martin

    A considerable reduction in the nutrient and pesticide inputs into the rivers and lakes of Germany is required in order to meet the “good ecological status” as demanded by the European Water Framework Directive (WFD). Subsurface tile drainage systems are one of the main pathways for such diffuse nutrient and pesticide inputs. However, the simulation of water and matter fluxes under tile-drained land on the landscape scale is still problematic in many countries, mainly due to a lack of data about the existing drainage systems. The present study examines for the first time whether an existing method to calculate the usually unknown proportions of tile-drained areas could be transferred to a large river basin, for which minimal data about drained areas is available. The study area was the Saale river basin (24,000 km 2) in central Germany, with a broad variety of soils and site characteristics. The share of tile-drained areas in the Saale river basin was calculated to be 11% of the agricultural area. Apart from that, the calculated proportion of tile-drained areas corresponded satisfactory with the statistical data of the meliorated areas of the former German Democratic Republic. The successful application of the promising method is considered as an important step towards the calculation of the proportion of tile-drained areas for the whole Germany and Europe.

  19. Rate Adaptive Based Resource Allocation with Proportional Fairness Constraints in OFDMA Systems

    PubMed Central

    Yin, Zhendong; Zhuang, Shufeng; Wu, Zhilu; Ma, Bo

    2015-01-01

    Orthogonal frequency division multiple access (OFDMA), which is widely used in the wireless sensor networks, allows different users to obtain different subcarriers according to their subchannel gains. Therefore, how to assign subcarriers and power to different users to achieve a high system sum rate is an important research area in OFDMA systems. In this paper, the focus of study is on the rate adaptive (RA) based resource allocation with proportional fairness constraints. Since the resource allocation is a NP-hard and non-convex optimization problem, a new efficient resource allocation algorithm ACO-SPA is proposed, which combines ant colony optimization (ACO) and suboptimal power allocation (SPA). To reduce the computational complexity, the optimization problem of resource allocation in OFDMA systems is separated into two steps. For the first one, the ant colony optimization algorithm is performed to solve the subcarrier allocation. Then, the suboptimal power allocation algorithm is developed with strict proportional fairness, and the algorithm is based on the principle that the sums of power and the reciprocal of channel-to-noise ratio for each user in different subchannels are equal. To support it, plenty of simulation results are presented. In contrast with root-finding and linear methods, the proposed method provides better performance in solving the proportional resource allocation problem in OFDMA systems. PMID:26426016

  20. The equivalence of two phylogenetic biodiversity measures: the Shapley value and Fair Proportion index.

    PubMed

    Hartmann, Klaas

    2013-11-01

    Most biodiversity conservation programs are forced to prioritise species in order to allocate their funding. This paper contains a mathematical proof that provides biological support for one common approach based on phylogenetic indices. Phylogenetic trees describe the evolutionary relationships between a group of taxa. Two indices for computing the distinctiveness of each taxon in a phylogenetic tree are considered here-the Shapley value and the Fair Proportion index. These indices provide a measure of the importance of each taxon for overall biodiversity and have been used to prioritise taxa for conservation. The Shapley value is the biodiversity contribution a taxon is expected to make if all taxa are equally likely to become extinct. This interpretation makes it appealing to use the Shapley value in biodiversity conservation applications. The Fair Proportion index lacks a convenient interpretation, however it is significantly easier to calculate and understand. It has been empirically observed that there is a high correlation between the two indices. This paper shows the mathematical basis for this correlation and proves that as the number of taxa increases, the indices become equivalent. Consequently in biodiversity prioritisation the simpler Fair Proportion index can be used whilst retaining the appealing interpretation of the Shapley value.

  1. Serious foetal growth restriction is associated with reduced proportions of natural killer cells in decidua basalis.

    PubMed

    Eide, Irina P; Rolfseng, Toril; Isaksen, Christina V; Mecsei, Reidun; Roald, Borghild; Lydersen, Stian; Salvesen, Kjell A; Harsem, Nina K; Austgulen, Rigmor

    2006-03-01

    Extravillous trophoblasts are major participants in placental development and remodelling of spiral arteries. Trophoblast invasion is regulated by maternal immune cells, and abnormal leucocyte subpopulation composition has been reported in implantation failure. In pre-eclampsia (PE), with or without foetal growth restriction (FGR), superficial trophoblast invasion and insufficient remodelling of spiral arteries are common findings. In the present study, we have compared spiral artery remodelling and leucocyte composition in decidual tissue from 30 cases (PE=8, FGR=5, PE + FGR=17) and 31 controls. Six histological remodelling criteria were established, and each pregnancy obtained a remodelling score. Numbers of natural killer (NK) cells (CD56+), T cells (CD3+) and activated (CD25+ or CD69+) leucocytes were determined and related to total leucocyte (CD45+) numbers in serial sections. Cases demonstrated significantly impaired spiral artery remodelling, inappropriate placental growth and reduced NK cell proportions, as compared to controls (P=0.02, P<0.001 and P=0.01, respectively). Reduced NK cell proportion was primarily found in pregnancies complicated by FGR, with or without PE, and a significant positive correlation was observed between NK cell proportion, trophoblast infiltration and placental growth. Our in vivo observations support the hypothesized association between NK cells, impaired placental development and pathogenesis of PE/FGR.

  2. Proportional and Integral Thermal Control System for Large Scale Heating Tests

    NASA Technical Reports Server (NTRS)

    Fleischer, Van Tran

    2015-01-01

    The National Aeronautics and Space Administration Armstrong Flight Research Center (Edwards, California) Flight Loads Laboratory is a unique national laboratory that supports thermal, mechanical, thermal/mechanical, and structural dynamics research and testing. A Proportional Integral thermal control system was designed and implemented to support thermal tests. A thermal control algorithm supporting a quartz lamp heater was developed based on the Proportional Integral control concept and a linearized heating process. The thermal control equations were derived and expressed in terms of power levels, integral gain, proportional gain, and differences between thermal setpoints and skin temperatures. Besides the derived equations, user's predefined thermal test information generated in the form of thermal maps was used to implement the thermal control system capabilities. Graphite heater closed-loop thermal control and graphite heater open-loop power level were added later to fulfill the demand for higher temperature tests. Verification and validation tests were performed to ensure that the thermal control system requirements were achieved. This thermal control system has successfully supported many milestone thermal and thermal/mechanical tests for almost a decade with temperatures ranging from 50 F to 3000 F and temperature rise rates from -10 F/s to 70 F/s for a variety of test articles having unique thermal profiles and test setups.

  3. Proportions of spontaneous mutations in males and females with ornithine transcarbamylase deficiency

    SciTech Connect

    Tuchman, M.; Briede, T.; Matsuda, I.

    1995-01-02

    We used specific mutation analysis to estimate the proportions of males and females with ornithine transcarbamylase (OTC) deficiency whose mutations occurred in the germ cells of one of the parents. The mutations were identified in the probands, and subsequently carrier testing was performed on their mothers and some of the grandmothers. Of 28 OTC deficient male,s only 2 (7%) had sporadic mutations (95% CI, 0.6-18.5%), whereas of 15 OTC deficient females, 12 (80%) had sporadic mutations (95% CI, 63-99%) (P < 0.001). Based on these results we estimated the male/female mutation rate ratio ({nu}/{mu}) in the OTC gene to be approximately 52. Assuming a fitness for males with OTC deficiency of 0 and the proportion of new female mutants at 0.80, the estimated fitness of heterozygous females is 0.4. Because of the difference in mutation rates between male and female germ cells, we suggest that 9/10 or higher, rather than the conventional 2/3 proportion, be applied when estimating prior risk of carrier status in a mother of one affected male. The prior risk of a mother of an affected female is much lower, approximately 2/10. 23 refs., 1 tab.

  4. Pedal proportions of Poposaurus gracilis: convergence and divergence in the feet of archosaurs.

    PubMed

    Farlow, James O; Schachner, Emma R; Sarrazin, John Cody; Klein, Hendrik; Currie, Philip J

    2014-06-01

    The crocodile-line basal suchian Poposaurus gracilis had body proportions suggesting that it was an erect, bipedal form like many dinosaurs, prompting questions of whether its pedal proportions, and the shape of its footprint, would likewise "mimic" those of bipedal dinosaurs. We addressed these questions through a comparison of phalangeal, digital, and metatarsal proportions of Poposaurus with those of extinct and extant crocodile-line archosaurs, obligate or facultatively bipedal non-avian dinosaurs, and ground birds of several clades, as well as a comparison of the footprint reconstructed from the foot skeleton of Poposaurus with known early Mesozoic archosaurian ichnotaxa. Bivariate and multivariate analyses of phalangeal and digital dimensions showed numerous instances of convergence in pedal morphology among disparate archosaurian clades. Overall, the foot of Poposaurus is indeed more like that of bipedal dinosaurs than other archosaur groups, but is not exactly like the foot of any particular bipedal dinosaur clade. Poposaurus likely had a digitigrade stance, and its footprint shape could have resembled grallatorid ichnotaxa, unless digit I of the foot of Poposaurus commonly left an impression.

  5. Confidence intervals for proportion difference from two independent partially validated series.

    PubMed

    Qiu, Shi-Fang; Poon, Wai-Yin; Tang, Man-Lai

    2016-10-01

    Partially validated series are common when a gold-standard test is too expensive to be applied to all subjects, and hence a fallible device is used accordingly to measure the presence of a characteristic of interest. In this article, confidence interval construction for proportion difference between two independent partially validated series is studied. Ten confidence intervals based on the method of variance estimates recovery (MOVER) are proposed, with each using the confidence limits for the two independent binomial proportions obtained by the asymptotic, Logit-transformation, Agresti-Coull and Bayesian methods. The performances of the proposed confidence intervals and three likelihood-based intervals available in the literature are compared with respect to the empirical coverage probability, confidence width and ratio of mesial non-coverage to non-coverage probability. Our empirical results show that (1) all confidence intervals exhibit good performance in large samples; (2) confidence intervals based on MOVER combining the confidence limits for binomial proportions based on Wilson, Agresti-Coull, Logit-transformation, Bayesian (with three priors) methods perform satisfactorily from small to large samples, and hence can be recommended for practical applications. Two real data sets are analysed to illustrate the proposed methods.

  6. Brain responses to facial attractiveness induced by facial proportions: evidence from an fMRI study.

    PubMed

    Shen, Hui; Chau, Desmond K P; Su, Jianpo; Zeng, Ling-Li; Jiang, Weixiong; He, Jufang; Fan, Jintu; Hu, Dewen

    2016-10-25

    Brain responses to facial attractiveness induced by facial proportions are investigated by using functional magnetic resonance imaging (fMRI), in 41 young adults (22 males and 19 females). The subjects underwent fMRI while they were presented with computer-generated, yet realistic face images, which had varying facial proportions, but the same neutral facial expression, baldhead and skin tone, as stimuli. Statistical parametric mapping with parametric modulation was used to explore the brain regions with the response modulated by facial attractiveness ratings (ARs). The results showed significant linear effects of the ARs in the caudate nucleus and the orbitofrontal cortex for all of the subjects, and a non-linear response profile in the right amygdala for only the male subjects. Furthermore, canonical correlation analysis was used to learn the most relevant facial ratios that were best correlated with facial attractiveness. A regression model on the fMRI-derived facial ratio components demonstrated a strong linear relationship between the visually assessed mean ARs and the predictive ARs. Overall, this study provided, for the first time, direct neurophysiologic evidence of the effects of facial ratios on facial attractiveness and suggested that there are notable gender differences in perceiving facial attractiveness as induced by facial proportions.

  7. Anaerobic digestion of municipal solid wastes containing variable proportions of waste types.

    PubMed

    Akunna, J C; Abdullahi, Y A; Stewart, N A

    2007-01-01

    In many parts of the world there are significant seasonal variations in the production of the main organic wastes, food and green wastes. These waste types display significant differences in their biodegradation rates. This study investigated the options for ensuring process stability during the start up and operation of thermophilic high-solids anaerobic digestion of feedstock composed of varying proportions of food and green wastes. The results show that high seed sludge to feedstock ratio (or low waste loading rate) is necessary for ensuring process pH stability without chemical addition. It was also found that the proportion of green wastes in the feedstock can be used to regulate process pH, particularly when operating at high waste loading rates (or low seed sludge to feedstock ratios). The need for chemical pH correction during start-up and digestion operation decreased with increase in green wastes content of the feedstock. Food wastes were found to be more readily biodegradable leading to higher solids reduction while green wastes brought about pH stability and higher digestate solid content. Combining both waste types in various proportions brought about feedstock with varying buffering capacity and digestion performance. Thus, careful selection of feedstock composition can minimise the need for chemical pH regulation as well as reducing the cost for digestate dewatering for final disposal.

  8. Brain responses to facial attractiveness induced by facial proportions: evidence from an fMRI study

    PubMed Central

    Shen, Hui; Chau, Desmond K. P.; Su, Jianpo; Zeng, Ling-Li; Jiang, Weixiong; He, Jufang; Fan, Jintu; Hu, Dewen

    2016-01-01

    Brain responses to facial attractiveness induced by facial proportions are investigated by using functional magnetic resonance imaging (fMRI), in 41 young adults (22 males and 19 females). The subjects underwent fMRI while they were presented with computer-generated, yet realistic face images, which had varying facial proportions, but the same neutral facial expression, baldhead and skin tone, as stimuli. Statistical parametric mapping with parametric modulation was used to explore the brain regions with the response modulated by facial attractiveness ratings (ARs). The results showed significant linear effects of the ARs in the caudate nucleus and the orbitofrontal cortex for all of the subjects, and a non-linear response profile in the right amygdala for only the male subjects. Furthermore, canonical correlation analysis was used to learn the most relevant facial ratios that were best correlated with facial attractiveness. A regression model on the fMRI-derived facial ratio components demonstrated a strong linear relationship between the visually assessed mean ARs and the predictive ARs. Overall, this study provided, for the first time, direct neurophysiologic evidence of the effects of facial ratios on facial attractiveness and suggested that there are notable gender differences in perceiving facial attractiveness as induced by facial proportions. PMID:27779211

  9. Study of microdosimetric energy deposition patterns in tissue-equivalent medium due to low-energy neutron fields using a graphite-walled proportional counter.

    PubMed

    Waker, A J; Aslam

    2011-06-01

    To improve radiation protection dosimetry for low-energy neutron fields encountered in nuclear power reactor environments, there is increasing interest in modeling neutron energy deposition in metrological instruments such as tissue-equivalent proportional counters (TEPCs). Along with these computational developments, there is also a need for experimental data with which to benchmark and test the results obtained from the modeling methods developed. The experimental work described in this paper is a study of the energy deposition in tissue-equivalent (TE) medium using an in-house built graphite-walled proportional counter (GPC) filled with TE gas. The GPC is a simple model of a standard TEPC because the response of the counter at these energies is almost entirely due to the neutron interactions in the sensitive volume of the counter. Energy deposition in tissue spheres of diameter 1, 2, 4 and 8 µm was measured in low-energy neutron fields below 500 keV. We have observed a continuously increasing trend in microdosimetric averages with an increase in neutron energy. The values of these averages decrease as we increase the simulated diameter at a given neutron energy. A similar trend for these microdosimetric averages has been observed for standard TEPCs and the Rossi-type, TE, spherical wall-less counter filled with propane-based TE gas in the same energy range. This implies that at the microdosimetric level, in the neutron energy range we employed in this study, the pattern of average energy deposited by starter and insider proton recoil events in the gas is similar to those generated cumulatively by crosser and stopper events originating from the counter wall plus starter and insider recoil events originating in the sensitive volume of a TEPC.

  10. Double phase (liquid/gas) xenon scintillation detector for WIMPs direct search

    NASA Astrophysics Data System (ADS)

    Yamashita, M.; Doke, T.; Kikuchi, J.; Suzuki, S.

    2003-10-01

    A double phase (liquid/gas) xenon prototype detector of a 0.3 l active volume for WIMPs direct search has been constructed and tested. Proportional scintillation signals are observed by a multi-wire anode mounted in gas phase after ionization electrons drifted successfully long distance in liquid xenon. Both direct and proportional scintillation were used to discriminate electron recoil from nuclear recoil. Basic performances of the detector and the rejection efficiency of background gamma rays were demonstrated.

  11. Scale effects and morphological diversification in hindlimb segment mass proportions in neognath birds

    PubMed Central

    2014-01-01

    Introduction In spite of considerable work on the linear proportions of limbs in amniotes, it remains unknown whether differences in scale effects between proximal and distal limb segments has the potential to influence locomotor costs in amniote lineages and how changes in the mass proportions of limbs have factored into amniote diversification. To broaden our understanding of how the mass proportions of limbs vary within amniote lineages, I collected data on hindlimb segment masses – thigh, shank, pes, tarsometatarsal segment, and digits – from 38 species of neognath birds, one of the most speciose amniote clades. I scaled each of these traits against measures of body size (body mass) and hindlimb size (hindlimb length) to test for departures from isometry. Additionally, I applied two parameters of trait evolution (Pagel’s λ and δ) to understand patterns of diversification in hindlimb segment mass in neognaths. Results All segment masses are positively allometric with body mass. Segment masses are isometric with hindlimb length. When examining scale effects in the neognath subclade Land Birds, segment masses were again positively allometric with body mass; however, shank, pedal, and tarsometatarsal segment masses were also positively allometric with hindlimb length. Methods of branch length scaling to detect phylogenetic signal (i.e., Pagel’s λ) and increasing or decreasing rates of trait change over time (i.e., Pagel’s δ) suffer from wide confidence intervals, likely due to small sample size and deep divergence times. Conclusions The scaling of segment masses appears to be more strongly related to the scaling of limb bone mass as opposed to length, and the scaling of hindlimb mass distribution is more a function of scale effects in limb posture than proximo-distal differences in the scaling of limb segment mass. Though negative allometry of segment masses appears to be precluded by the need for mechanically sound limbs, the positive allometry of

  12. Gas Chromatography

    NASA Astrophysics Data System (ADS)

    Qian, Michael C.

    Gas chromatography (GC) has many applications in the analysis of food products. GC has been used for the determination of fatty acids, triglycerides, cholesterol, gases, water, alcohols, pesticides, flavor compounds, and many more. While GC has been used for other food components such as sugars, oligosaccharides, amino acids, peptides, and vitamins, these substances are more suited to analysis by high performance liquid chromatography. GC is ideally suited to the analysis of volatile substances that are thermally stable. Substances such as pesticides and flavor compounds that meet these criteria can be isolated from a food and directly injected into the GC. For compounds that are thermally unstable, too low in volatility, or yield poor chromatographic separation due to polarity, a derivatization step must be done before GC analysis. The two parts of the experiment described here include the analysis of alcohols that requires no derivatization step, and the analysis of fatty acids which requires derivatization. The experiments specify the use of capillary columns, but the first experiment includes conditions for a packed column.

  13. Transition of RF internal antenna plasma by gas control

    SciTech Connect

    Hamajima, Takafumi; Yamauchi, Toshihiko; Kobayashi, Seiji; Hiruta, Toshihito; Kanno, Yoshinori

    2012-07-11

    The transition between the capacitively coupled plasma (CCP) and the inductively coupled plasma (ICP) was investigated with the internal radio frequency (RF) multi-turn antenna. The transition between them showed the hysteresis curve. The radiation power and the period of the self-pulse mode became small in proportion to the gas pressure. It was found that the ICP transition occurred by decreasing the gas pressure from 400 Pa.

  14. Noble gas fractionation during subsurface gas migration

    NASA Astrophysics Data System (ADS)

    Sathaye, Kiran J.; Larson, Toti E.; Hesse, Marc A.

    2016-09-01

    Environmental monitoring of shale gas production and geological carbon dioxide (CO2) storage requires identification of subsurface gas sources. Noble gases provide a powerful tool to distinguish different sources if the modifications of the gas composition during transport can be accounted for. Despite the recognition of compositional changes due to gas migration in the subsurface, the interpretation of geochemical data relies largely on zero-dimensional mixing and fractionation models. Here we present two-phase flow column experiments that demonstrate these changes. Water containing a dissolved noble gas is displaced by gas comprised of CO2 and argon. We observe a characteristic pattern of initial co-enrichment of noble gases from both phases in banks at the gas front, followed by a depletion of the dissolved noble gas. The enrichment of the co-injected noble gas is due to the dissolution of the more soluble major gas component, while the enrichment of the dissolved noble gas is due to stripping from the groundwater. These processes amount to chromatographic separations that occur during two-phase flow and can be predicted by the theory of gas injection. This theory provides a mechanistic basis for noble gas fractionation during gas migration and improves our ability to identify subsurface gas sources after post-genetic modification. Finally, we show that compositional changes due to two-phase flow can qualitatively explain the spatial compositional trends observed within the Bravo Dome natural CO2 reservoir and some regional compositional trends observed in drinking water wells overlying the Marcellus and Barnett shale regions. In both cases, only the migration of a gas with constant source composition is required, rather than multi-stage mixing and fractionation models previously proposed.

  15. Gas amplified ionization detector for gas chromatography

    DOEpatents

    Huston, Gregg C.

    1992-01-01

    A gas-amplified ionization detector for gas chromatrography which possesses increased sensitivity and a very fast response time. Solutes eluding from a gas chromatographic column are ionized by UV photoionization of matter eluting therefrom. The detector is capable of generating easily measured voltage signals by gas amplification/multiplication of electron products resulting from the UV photoionization of at least a portion of each solute passing through the detector.

  16. Comparison of plastics used in tissue equivalent proportional counters (TEPC) and development of a balloon borne TEPC

    NASA Astrophysics Data System (ADS)

    Collums, Tyler L.

    This study investigates alternatives to A-150 tissue equivalent plastic for use in the construction of tissue equivalent gas-filled detectors for the measurement of dosimetric quantities. This study looks at four different alternative plastics: acrylic, Nylon, polyethylene, and polystyrene. These alternative materials are more readily available and easier to machine than A-150 tissue equivalent plastic. In this study they are compared to A-150 tissue equivalent plastic to determine how they compare in the measurement of lineal energy spectra from energetic protons and heavy ions as found in the space radiation environment, as well as at relevant clinical energies used in proton and heavy ion therapy. In experiments carried out at the ProCure proton therapy center in Oklahoma City, five proportional counters possessing ionization cavities constructed of five different materials (A-150 tissue equivalent plastic, acrylic, Nylon, polyethylene, and polystyrene) were used to measure the lineal energy spectra of energetic proton beams of 87 MeV, 162 MeV, and 222 MeV. Exposures to energetic heavy ions were carried out at HIMAC in Japan using beams of 143 MeV/amu He, 265 MeV/amu C, 440 MeV/amu Si, 430 MeV/amu Ar, and 421 MeV/amu Fe. Monte Carlo simulations using FLUKA were also done for each detector for each proton beam and each heavy ion beam. Comparison of the measured data obtained at ProCure and HIMAC, as well as simulation results using the Monte Carlo code FLUKA, indicate that the responses of the four alternative plastics tested are very similar to the response of A-150 tissue equivalent plastic. FLUKA simulations done for a detector made of ICRU muscle are also shown to have a response similar to that of all five plastics. A flight version of the TEPCs has also been developed for a high altitude flight on a balloon or other vehicle.

  17. A valve with seat-slope proportional to flow area at all poppet positions

    NASA Astrophysics Data System (ADS)

    Guillaume, D. W.; DeVries, D.

    1991-01-01

    An adjustable gas-blending apparatus is hypothesized that would maintain a consistent mixture over a broad range of flowrates. The design equations for the unique valve seat required for such an apparatus are developed and solved numerically. An example seat is calculated and illustrated in table form. For preliminary study, a prototype is constructed and empirical data are presented which substantiate the design.

  18. Coalbed gas development

    SciTech Connect

    Not Available

    1992-01-01

    This book includes: Overview of coalbed gas development; Coalbed gas development in the West Coalbed gas development on Indian lands; Multi-mineral development conflicts; Statutory solutions to ownership disputes; State and local regulation; Environmental regulations; Status of the section 29 tax credit extension; Using the section 29 credit; Leasing coalbed gas prospects; Coalbed gas joint operating agreements and Purchase and sale agreements for coalbed gas properties.

  19. An Analysis of Maxillary Anterior Teeth Dimensions for the Existence of Golden Proportion: Clinical Study

    PubMed Central

    Sandeep, Nalla; Satwalekar, Parth; Srinivas, Siva; Reddy, Chandra Sekhar; Reddy, G Ramaswamy; Reddy, B Anantha

    2015-01-01

    Background: Appearance of the face is a great concern to everyone, as it is a significant part of self-image. The study analyzed the clinical crown dimensions of the maxillary anterior teeth with respect to their apparent mesiodistal widths, width-to-height ratio to determine whether golden proportion existed among the South Indian population. Materials and Methods: A total of 240 dentulous subjects were chosen for the study (120 males and 120 females) age ranging between 18 and 28 years. Full face and anterior teeth images of the subjects were made on specially designed device resembling a face-bow, mounted onto the wall under a standard light source. The width and height of the maxillary central incisors were measured on the stone casts using a digital caliper. Results: The mean perceived maxillary lateral incisor to central incisor width ratio was 0.67 in males and 0.703 in females. The mean perceived maxillary canine to lateral incisor width ratio was 0.744 in males and 0.714 in females. The mean width-to-height ratio of the maxillary central incisor was 79.49% in males and 79.197% in females. Conclusion: The golden proportion was not found between perceived mesiodistal widths of maxillary central and lateral incisors and nor between perceived mesiodistal widths of maxillary lateral incisors and canines. In the majority of subjects, the width-to-height ratio of maxillary central incisor was within 75-80%. There are no statistically significant differences in maxillary anterior teeth proportions between males and females. The results may serve as guidelines for treatment planning in restorative dentistry and periodontal surgery. PMID:26435610

  20. Channel selection for simultaneous and proportional myoelectric prosthesis control of multiple degrees-of-freedom

    NASA Astrophysics Data System (ADS)

    Hwang, Han-Jeong; Hahne, Janne Mathias; Müller, Klaus-Robert

    2014-10-01

    Objective. Recent studies have shown the possibility of simultaneous and proportional control of electrically powered upper-limb prostheses, but there has been little investigation on optimal channel selection. The objective of this study is to find a robust channel selection method and the channel subsets most suitable for simultaneous and proportional myoelectric prosthesis control of multiple degrees-of-freedom (DoFs). Approach. Ten able-bodied subjects and one person with congenital upper-limb deficiency took part in this study, and performed wrist movements with various combinations of two DoFs (flexion/extension and radial/ulnar deviation). During the experiment, high density electromyographic (EMG) signals and the actual wrist angles were recorded with an 8 × 24 electrode array and a motion tracking system, respectively. The wrist angles were estimated from EMG features with ridge regression using the subsets of channels chosen by three different channel selection methods: (1) least absolute shrinkage and selection operator (LASSO), (2) sequential feature selection (SFS), and (3) uniform selection (UNI). Main results. SFS generally showed higher estimation accuracy than LASSO and UNI, but LASSO always outperformed SFS in terms of robustness, such as noise addition, channel shift and training data reduction. It was also confirmed that about 95% of the original performance obtained using all channels can be retained with only 12 bipolar channels individually selected by LASSO and SFS. Significance. From the analysis results, it can be concluded that LASSO is a promising channel selection method for accurate simultaneous and proportional prosthesis control. We expect that our results will provide a useful guideline to select optimal channel subsets when developing clinical myoelectric prosthesis control systems based on continuous movements with multiple DoFs.