Science.gov

Sample records for 3m dental products

  1. Modeling the hydrothermal circulation and the hydrogen production at the Rainbow site with Cast3M

    NASA Astrophysics Data System (ADS)

    Perez, F.; Mügler, C.; Charlou, J.; Jean-baptiste, P.

    2012-12-01

    On the Mid-Atlantic Ridge, the Rainbow venting site is described as an ultramafic-hosted active hydrothermal site and releases high fluxes of methane and hydrogen [1, 2]. This behavior has first been interpreted as the result of serpentinization processes. But geochemical reactions involving olivine and plagioclase assemblages, and leading to chlorite, tremolite, talc and magnetite assemblages, could contribute to the observed characteristics of the exiting fluid [2]. The predominance of one of these geochemical reactions or their coexistence strongly depend on the hydrothermal fluid circulation. We developed and validated a 2D/3D numerical model using a Finite Volume method to simulate heat driven fluid flows in the framework of the Cast3M code [3, 4]. We also developed a numerical model for hydrogen production and transport that is based on experimental studies of the serpentinization processes [5-6]. This geochemical model takes into account the exothermic and water-consuming behavior of the serpentinization reaction and it can be coupled to our thermo-hydrogeological model. Our simulations provide temperatures, mass fluxes and venting surface areas very close to those estimated in-situ [7]. We showed that a single-path model [8] was necessary to simulate high values such as the in-situ measured temperatures and estimated water mass fluxes of the Rainbow site [7]. This single-path model will be used to model the production and transport of hydrogen at the Rainbow hydrothermal site. References [1]Charlou et al. (2010) AGU Monograph series. [2]Seyfried et al. (2011) Geochim. Cosmochim. Acta 75, 1574-1593. [3]http://www-cast3m.cea.fr. [4]Martin & Fyfe (1970) Chem. Geol. 6, 185-202. [5] Marcaillou et al. (2011) Earth and Planet. Sci. Lett. 303, 281-290. [6]Malvoisin et al. (2012) JGR, 117, B01104. [7]Perez et al. (2012) submited to Computational Geosciences. [8]Lowell & Germanovich (2004) AGU, Washington DC, USA.

  2. Expanded function allied dental personnel and dental practice productivity and efficiency.

    PubMed

    Beazoglou, Tryfon J; Chen, Lei; Lazar, Vickie F; Brown, L Jackson; Ray, Subhash C; Heffley, Dennis R; Berg, Rob; Bailit, Howard L

    2012-08-01

    This study examined the impact of expanded function allied dental personnel on the productivity and efficiency of general dental practices. Detailed practice financial and clinical data were obtained from a convenience sample of 154 general dental practices in Colorado. In this state, expanded function dental assistants can provide a wide range of reversible dental services/procedures, and dental hygienists can give local anesthesia. The survey identified practices that currently use expanded function allied dental personnel and the specific services/procedures delegated. Practice productivity was measured using patient visits, gross billings, and net income. Practice efficiency was assessed using a multivariate linear program, Data Envelopment Analysis. Sixty-four percent of the practices were found to use expanded function allied dental personnel, and on average they delegated 31.4 percent of delegatable services/procedures. Practices that used expanded function allied dental personnel treated more patients and had higher gross billings and net incomes than those practices that did not; the more services they delegated, the higher was the practice's productivity and efficiency. The effective use of expanded function allied dental personnel has the potential to substantially expand the capacity of general dental practices to treat more patients and to generate higher incomes for dental practices.

  3. Evaluation of 3M Molecular Detection System and ANSR Pathogen Detection System for rapid detection of Salmonella from egg products.

    PubMed

    Hu, L; Ma, L M; Zheng, S; He, X; Wang, H; Brown, E W; Hammack, T S; Zhang, G

    2016-11-02

    Isothermal amplification assay is a novel simple detection technology that amplifies DNA with high speed, efficiency, and specificity under isothermal conditions. The objective of this study was to evaluate the effectiveness of the 3M Molecular Detection System (MDS) and ANSR Pathogen Detection System (PDS) for the detection of Salmonella in egg products as compared to the Food and Drug Administration's Bacteriological Analytical Manual (BAM) culture method and a modified culture method (3M MDS and ANSR PDS preferred method). Two Salmonella ser. Enteritidis (18579, PT4; CDC_2010K_1441, PT8), one Salmonella ser. Heidelberg (607310-1), and one Salmonella ser. Typhimurium (0723) isolates were used in this study. Seven wet egg products and 13 dry egg products were inoculated with these strains individually at 1 to 5 CFU/25 g. One set of test portions was prepared following FDA BAM procedures [with lactose broth (LB) as pre-enrichment broth]. Another set of test portions was prepared using buffered peptone water (BPW) as pre-enrichment broth, as instructed by the 2 detection systems. Results from 3M MDS and ANSR PDS were 100% in agreement with their BPW-based culture method results. When LB was used as pre-enrichment broth, the number of Salmonella positive test portions (80 tested), identified with the BAM, 3M MDS, and ANSR PDS, were 63, 61, and 60, respectively. In conclusion, both 3M MDS and ANSR PDS Salmonella assays were as effective as their BPW based culture methods and were equivalent to the BAM culture method for the detection of Salmonella in egg products. These sensitive isothermal assays can be used as rapid detection tools for Salmonella in egg products provided that BPW is used as pre-enrichment broth.

  4. Chloryl nitrate - A novel product of the OClO + NO3 + M recombination

    NASA Technical Reports Server (NTRS)

    Friedl, Randall R.; Sander, Stanley P.; Yung, Yuk L.

    1992-01-01

    The products of the reaction of OClO with NO3 were investigated between 220 and 298 K using a flow reactor and infrared, visible, and ultraviolet analysis. At temperatures below 250 K new infrared and ultraviolet absorption features were observed and assigned to the novel compound chloryl nitrate (O2ClONO2). Additionally, ClO and NO2 were observed as reaction products, indicating the existence of a second reaction channel. O2ClONO2 formation predominates at temperatures below 230 K. The reaction rate constant at 220 K is estimated to be on the order of 10 exp -14 cu cm/molecule s in 1-5 Torr of helium. These observations suggest that O2ClONO2 may exist in the terrestrial stratosphere.

  5. Crevice corrosion products of dental amalgam

    SciTech Connect

    Sutow, E.J.; Jones, D.W.; Hall, G.C.; Owen, C.G. )

    1991-07-01

    The objective of this study was to determine the in vitro corrosion products that resulted from crevice corrosion of low- and high-copper dental amalgams. Specimens were potentiostatically polarized in a chloride-containing electrolyte while set against a PTFE surface to form a crevice. After 16 h, corrosion products were examined by light microscopy, SEM, EDS, and XRD. Analysis showed the presence of three previously reported products (Sn4(OH)6Cl2, SnO, and Cu2O) and a new product, CuCl, which formed on high-copper, {gamma} 2-free amalgams. Thermodynamic considerations show that CuCl is stable for the reported in vivo potentials of amalgam restorations and the high acidity and high chloride ion concentration associated with crevice corrosion.

  6. Dental Amalgam

    MedlinePlus

    ... Products and Medical Procedures Dental Devices Dental Amalgam Dental Amalgam Share Tweet Linkedin Pin it More sharing options Linkedin Pin it Email Print Dental amalgam is a dental filling material which is ...

  7. Ablation by-products of dental materials from the Er:YAG laser and the dental handpiece

    NASA Astrophysics Data System (ADS)

    Wigdor, Harvey A.; Visuri, Steven R.; Walsh, Joseph T., Jr.

    1995-05-01

    Recently there has been much interest in lasers and their potential use to replace the dental drill. The research has been directed towards vital dental tissues. It must be understood that any laser to be used in dentistry which will replace the dental drill must also ablate and remove existing dental materials. Some concern exists about the ablation products when the Er:YAG laser is used to ablate dental materials. It is incumbent on the professionals using these lasers to understand the materials being produced by these lasers and protect themselves and their patients from possible toxic products. It is the intent of this paper to evaluate the products produced by the ablation of both dental amalgam and composite dental restorative materials and compare them with those produced by the traditional dental handpiece (drill).

  8. Are larger dental practices more efficient? An analysis of dental services production.

    PubMed

    Lipscomb, J; Douglass, C W

    1986-12-01

    Whether cost-efficiency in dental services production increases with firm size is investigated through application of an activity analysis production function methodology to data from a national survey of dental practices. Under this approach, service delivery in a dental practice is modeled as a linear programming problem that acknowledges distinct input-output relationships for each service. These service-specific relationships are then combined to yield projections of overall dental practice productivity, subject to technical and organizational constraints. The activity analysis reported here represents arguably the most detailed evaluation yet of the relationship between dental practice size and cost-efficiency, controlling for such confounding factors as fee and service-mix differences across firms. We conclude that cost-efficiency does increase with practice size, over the range from solo to four-dentist practices. Largely because of data limitations, we were unable to test satisfactorily for scale economies in practices with five or more dentists. Within their limits, our findings are generally consistent with results from the neoclassical production function literature. From the standpoint of consumer welfare, the critical question raised (but not resolved) here is whether these apparent production efficiencies of group practice are ultimately translated by the market into lower fees, shorter queues, or other nonprice benefits.

  9. Access to dental care: a historical review of medicaid eligibility growth and dental productivity decline.

    PubMed

    Kinlaw, D H

    2001-09-01

    The present dilemma in providing dental services to the indigent and Medicaid recipients throughout this nation has generated considerable controversy as to the evolution of the problem. Most states recognize that there are deficiencies in the provision of dental services to these populations and are seeking resolutions. While state licensing board practices and dental professional society politics have been the object of criticism as contributing to if not causing of this problem, other rational and statistically valid explanations for the current difficulty exist. As an explanation for access to care issues, this paper explores the decline in the national numbers of dental practitioners and concomitant dental productivity. Furthermore, it relates those parameters to the dramatic rise in the utilization and demand for dental services resulting from a robust economy, population growth trends, and changes in state and federal Medicaid legislation that increase numbers of Medicaid-eligible recipients. While these general trends are national in scope and application, the state of North Carolina and its experience will be used to fully explore the impact of these trends at the state and local level.

  10. Increasing Dental Output: A Review of Productivity. Health Manpower Policy Discussion Paper Series. No.: B2.

    ERIC Educational Resources Information Center

    Feldstein, Paul J.

    Based upon studies conducted in the U. S. and on data from other countries on the method used to provide dental care, increased dental productivity can be achieved through greater use of dental auxiliaries and by the use of expanded function auxiliaries. Dental practice laws should be made less restrictive to enable dentists to more fully utilize…

  11. The Decim system for the production of dental restorations.

    PubMed

    Sjölin, R; Sundh, A; Bergman, M

    1999-07-01

    The general background to the development of CAD/CAM is presented in short. Specific problems when using this technique for the manufacturing of dental restorations are emphasized, and then the reverse engineering and CAD/CAM process that have been implemented in the Decim (Dentronic AB, Skellefteå, Sweden) system are presented. The system is organized in the following way: 1. The measurement process is encapsulated in a product called Decim Reader. 2. The design functionality is provided by software running on a conventional personal computer. This unit is called Decim Designer. 3. The CAM calculation is done by a dedicated personal computer, the Decim Calculator, that does not require any user interaction. 4. The actual manufacturing of the restorations is performed in the Decim Producer that works with a grinding technique. These components communicate via a local computer network or, when a distributed solution is desired, via internet. The Decim System is presently used for the production of dental ceramic restorations, and it is the only system which can be used for manufacturing inlays of yttria-stabilized zirconia. This ceramic material is CE-approved under the brand name Denzir (Dentronic AB, Skellefteå, Sweden). Due to its favorable mechanical properties, it may be an alternative to dental amalgam, and is therefore of topical interest in dentistry. The use of computer-based techniques for manufacturing dental restorations is briefly outlined and commented on.

  12. Impact of dental therapists on productivity and finances: II. Federally Qualified Health Centers.

    PubMed

    Beazoglou, Tryfon J; Bailit, Howard L; DeVitto, Judy; McGowan, Taegen; Myne-Joslin, Veronica

    2012-08-01

    This article estimates the impact of dental therapists treating children on Federally Qualified Health Center (FQHC) dental clinic finances and productivity. The analysis is based on twelve months of patient visit and financial data from large FQHC dental clinics (multiple delivery sites) in Connecticut and Wisconsin. Assuming dental therapists provide restorative, extraction, and pulpal services and dental hygienists continue to deliver all hygiene services, the maximum reduction in costs is about 6 percent. The limited impact of dental therapists on FQHC dental clinic finances is because 1) dental therapists only account for 17 percent of children services and 2) dentists are responsible for only 25 percent of clinic expenses and cost reductions are related to the difference between dental therapist and dentist wage rates.

  13. [Without risks and side effects? Product advertisements in dental journals].

    PubMed

    Lauer, Christian D; Türp, Jens C

    2006-01-01

    We examined number, size, design, and scientific approach of advertisements published in three dental journals between 1970 and 2004. For this purpose, the Schweizer Monatsschrift für Zahnmedizin (SMfZ), Zahnärztliche Mitteilungen (ZM; Ger many), and The Journal of the American Dental Association (JADA) were chosen. The January and July issues of each of the 35 volumes were analyzed. Of 28,711 pages, 7265.5 were identified as advertisements (JADA: 29.9%, SMfZ: 24.8%, ZM: 13.7%). While whole-page ads dominated in JADA (87.2%) and SMfZ (68.9%), ad-sizes were more balanced in ZM. During the observation period, the use of photographs increased, while that of drawings decreased. Images of products dominated as compared to pictures of the orofacial region. Citations from study results (SMfZ 3.3%: ZM 2.5%; JADA 5.5%) and diagrams/tables (SMfZ: 3.2%; ZM: 1.0%; JADA: 4.5%) were rarely used, and an appreciable number of cited references could not be identified (SMfZ: 16%, ZM: 18%). More than 80% of the identifiable cited references corroborated the claim made in the advertisement. However, a critical attitude towards ads in dental journals appears justified.

  14. Does a case completion curriculum influence dental students' clinical productivity?

    PubMed

    Park, Sang E; Susarla, Harlyn K; Nalliah, Romesh; Timothé, Peggy; Howell, T Howard; Karimbux, Nadeem Y

    2012-05-01

    The purpose of this study was to evaluate the effects of a new clinical curriculum on dental student productivity as measured by number of procedures performed in the student teaching practice. Harvard School of Dental Medicine adopted a new clinical education model for the predoctoral program in summer 2009 based upon a Case Completion Curriculum (CCC) rather than a discipline-based numeric threshold system. The two study groups (threshold group and case completion group) consisted of students who graduated in 2009 and 2010. Clinical performance was assessed by clinical productivity across five major discipline areas: periodontics, operative dentistry, removable prosthodontics, fixed prosthodontics, and endodontics. The relationships between the two study groups with regard to number of procedures performed by category revealed that the case completion group performed a significantly higher number of operative and removable prosthodontic procedures, but fewer periodontal and endodontic procedures (p≤0.03). No statistically significant difference in number of procedures was observed with fixed prosthodontic procedures between the two groups. Clinical productivity as a result of redesigning the clinical component of the curriculum varied in selected disciplines. The CCC, in which the comprehensive management of the patient was the priority, contributed to achieving a patient-based comprehensive care practice.

  15. 75 FR 58414 - Dental Products Panel of the Medical Devices Advisory Committee; Amendment of Notice

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-09-24

    ... HUMAN SERVICES Food and Drug Administration Dental Products Panel of the Medical Devices Advisory... Medical Devices Advisory Committee. This meeting was announced in the Federal Register of June 11, 2010... announced that a meeting of the Dental Products Panel of the Medical Devices Advisory Committee would...

  16. Creating breakthroughs at 3M.

    PubMed

    von Hippel, E; Thomke, S; Sonnack, M

    1999-01-01

    Most senior managers want their product development teams to create break-throughs--new products that will allow their companies to grow rapidly and maintain high margins. But more often they get incremental improvements to existing products. That's partly because companies must compete in the short term. Searching for breakthroughs is expensive and time consuming; line extensions can help the bottom line immediately. In addition, developers simply don't know how to achieve breakthroughs, and there is usually no system in place to guide them. By the mid-1990s, the lack of such a system was a problem even for an innovative company like 3M. Then a project team in 3M's Medical-Surgical Markets Division became acquainted with a method for developing breakthrough products: the lead user process. The process is based on the fact that many commercially important products are initially thought of and even prototyped by "lead users"--companies, organizations, or individuals that are well ahead of market trends. Their needs are so far beyond those of the average user that lead users create innovations on their own that may later contribute to commercially attractive breakthroughs. The lead user process transforms the job of inventing breakthroughs into a systematic task of identifying lead users and learning from them. The authors explain the process and how the 3M project team successfully navigated through it. In the end, the team proposed three major new product lines and a change in the division's strategy that has led to the development of breakthrough products. And now several more divisions are using the process to break away from incrementalism.

  17. Efficacy of Specific Plant Products on Microorganisms Causing Dental Caries

    PubMed Central

    Kanth, M Rajini; Prakash, A Ravi; Sreenath, G; Reddy, Vikram Simha

    2016-01-01

    Introduction Dental caries and periodontal diseases are the most common oral diseases seen globally, both in developed and developing countries. Oral microorganisms that is gram positive and gram negative bacteria are known to be involved in causation of these diseases. Nowadays commercially available dentrifices and mouth rinses are known to contain ingredients that can alter the oral microbial flora and have undesirable side effects such as vomiting, diarrhoea, disarrangement of oral, intestinal flora and tooth staining. Naturally available plant products are known to be less harmful with fewer side effects and also economical for the patient. Aim The aim of this study was to determine the antimicrobial properties of 10 naturally available plant products against oral microorganisms causing caries and to check the efficacy of these products in-vitro and to use these in mouth washes and dentrifices. Materials and Methods Sample of caries material was scrapped out from the extracted teeth and transferred to liquid broth, streaked over the agar media to allow for the growth of microorganisms. Plant products like clove oil, neem, ginger-garlic paste, tea tree oil, ginger, garlic, cinnamon oil, green tea, eucalyptus oil and turmeric were used. Antimicrobial efficacy of these products, was estimated by measuring zones of inhibition in the nutrient agar media. Results Clove oil was the most effective of all products against microorganisms causing caries with zone of inhibition - 30mm followed by ginger-garlic paste - 25mm, Neem - 15mm, tea tree oil - 15mm. Conclusion Based on the above results, it can be inferred that these natural products have the maximum efficacy against microorganisms and can be recommended in dentifrices, mouth rinses, topical gels, etc. PMID:28209019

  18. Composition and production rate of dental solid waste and associated management practices in Hamadan, Iran.

    PubMed

    Nabizadeh, Ramin; Koolivand, Ali; Jafari, Ahmad Jonidi; Yunesian, Massoud; Omrani, Gasemali

    2012-06-01

    The objective of this study was to identify the components, composition and production rate of dental solid waste and associated management practices in dental offices in Hamadan. A total of 28 offices, including ten general dentist offices, eight specialist dentist offices, five practical dentist offices and five denture maker offices were selected in a random way. Three samples from each selected type were taken and the waste was manually separated into 74 sub-fractions and each sub-fraction was weighed. The results showed that the total annual dental waste production in dental offices was 41947.43 kg. Domestic type, potentially infectious, chemical and pharmaceutical and toxic waste constituted 71.15, 21.40, 7.26 and 0.18%, respectively of this amount. Only seven fractions including gypsum, latex gloves, nylon, dental impression material, used medicine ampoules, saliva-contaminated paper towels and saliva ejectors constituted about 80% of the waste. It was also indicated that there were no effective activity for waste minimization, separation, reuse and recycling in dental offices and the management of sharps, potentially infectious waste and other hazardous waste was poor.

  19. Use of fluoride products for young patients at high risk of dental caries.

    PubMed

    Croll, Theodore P; Berg, Joel H

    2014-09-01

    Extensive education in oral hygiene home care, nutrition counseling, and routine reinforcement of home-care instructions at periodic check-ups lead to better oral health for many young children and teenagers. In addition, resistance to dental caries infection can be increased significantly by intelligent use of bonded resin sealants and systemic and topical fluoride products. This article discusses protocols for use of in-office applied topical fluoride and daily at-home use of topical fluoride products for children and teens at high risk of dental caries.

  20. The design and production of Ti-6Al-4V ELI customized dental implants

    NASA Astrophysics Data System (ADS)

    Chahine, Gilbert; Koike, Mari; Okabe, Toru; Smith, Pauline; Kovacevic, Radovan

    2008-11-01

    This paper addresses the production of customized Ti-6Al-4V ELI dental implants via electron beam melting (EBM). The melting of Ti-6Al-4V ELI powder produces implants with great biocompatibility, fi ne mechanical performance, and a high bone ingrowth potential. The EBM technology is used to produce one-component dental implants that mimic the exact shape of the patient’s tooth, replacing the traditional, three-component, “screw-like” standardized dental implants currently used. The new generation of implants provides the possibility of simplifying pre-insertion procedures leading to faster healing time, and the potential of better and stronger osseointegration, specifi cally through incorporating lattice structure design.

  1. Sea-ice, clouds and atmospheric conditions in the arctic and their interactions as derived from a merged C3M data product

    NASA Astrophysics Data System (ADS)

    Nag, Bappaditya

    The polar regions of the world constitute an important sector in the global energy balance. Among other effects responsible for the change in the sea-ice cover like ocean circulation and ice-albedo feedback, the cloud-radiation feedback also plays a vital role in modulation of the Arctic environment. However the annual cycle of the clouds is very poorly represented in current global circulation models. This study aimed to explore the atmospheric conditions in the Arctic on an unprecedented spatial coverage spanning 70°N to 80°N through the use of a merged data product, C3MData (derived from NASA's A-Train Series). The following three topics provide outline on how this dataset can be used to accomplish a detailed analysis of the Arctic environment and provide the modelling community with first information to update their models aimed at better forecasts. (1)The three properties of the Arctic climate system to be studied using the C3MData are sea-ice, clouds, and the atmospheric conditions. The first topic is to document the present states of the three properties and also their time evolutions or their seasonal cycles. (2)The second topic is aimed at the interactions or the feedbacks processes among the three properties. For example, the immediate alteration in the fluxes and the feedbacks arising from the change in the sea-ice cover is investigated. Seasonal and regional variations are also studied. (3)The third topics is aimed at the processes in native spatial resolution that drive or accompany with sea ice melting and sea ice growth. Using a composite approach based on a classification due to surface type, it is found that limitation of the water vapour influx from the surface due to change in phase at the surface featuring open oceans or marginal sea-ice cover to complete sea-ice cover is a major determinant in the modulation of the atmospheric moisture. The impact of the cloud-radiative effects in the Arctic is found to vary with sea-ice cover and seasonally

  2. [Dental education in Brazil: the production of knowledge during 1995-2006].

    PubMed

    Casotti, Elisete; Ribeiro, Victoria Maria Brant; Gouvêa, Mônica Villela

    2009-01-01

    The article presents the findings of a study on the production of knowledge in dental education during 1995-2006. A corpus of 52 theses and twenty dissertations from Capes' databank were researched. The purpose was to survey production and relate it to Brazilian trends in health and education. It is concluded that while production is still incipient, a variety of themes appear: innovative disciplinary experiences, analyses of the impact of new teaching methodologies, teacher training, syllabuses, and profiles of graduates. Overall, these papers reflect the vitality of the field and its potential for arriving at syntheses, taking into account the complexity and scope of the task of reflecting on the education of healthcare professionals in Brazil.

  3. 75 FR 33315 - Dental Products Panel of the Medical Devices Advisory Committee; Notice of Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-06-11

    ... received by FDA concerning the final rule on the classification of dental amalgam, which published in the... adequacy of the risk assessment performed by FDA in classifying dental amalgam in light of a new report...

  4. Computer-Assisted Instruction In Dental Diagnosis; A Systematic Product Development.

    ERIC Educational Resources Information Center

    Barber, Thomas K.; Sokolow, Sonya

    A developmental project created and field tested a computer-assisted instructional (CAI) unit in dental diagnosis. The main objectives were to determine 1) if, after having received CAI, the dental student could determine whether a patient had a clinical need for space management and 2) if the dental student's attitude toward CAI and space…

  5. Genetics Home Reference: 3-M syndrome

    MedlinePlus

    ... Kuklik M, Zemkova D, Kozlowski K. 3-M syndrome in two sisters. J Paediatr Child Health. 2002 Aug;38(4):419-22. Citation on PubMed Temtamy SA, Aglan MS, Ashour AM, Ramzy MI, Hosny LA, Mostafa MI. 3-M syndrome: a report of three Egyptian cases with review ...

  6. Oral hygiene products, medications and drugs - hidden aetiological factors for dental erosion.

    PubMed

    Hellwig, Elmar; Lussi, Adrian

    2014-01-01

    Acidic or EDTA-containing oral hygiene products and acidic medicines have the potential to soften dental hard tissues. The low pH of oral care products increases the chemical stability of some fluoride compounds and favours the incorporation of fluoride ions in the lattice of hydroxyapatite and the precipitation of calcium fluoride on the tooth surface. This layer has some protective effect against an erosive attack. However, when the pH is too low or when no fluoride is present these protecting effects are replaced by direct softening of the tooth surface. Oral dryness can occur as a consequence of medication such as tranquilizers, antihistamines, antiemetics and antiparkinsonian medicaments or of salivary gland dysfunction. Above all, patients should be aware of the potential demineralization effects of oral hygiene products with low pH. Acetyl salicylic acid taken regularly in the form of multiple chewable tablets or in the form of headache powder, as well as chewing hydrochloric acids tablets for the treatment of stomach disorders, can cause erosion. There is most probably no direct association between asthmatic drugs and erosion on the population level. Consumers and health professionals should be aware of the potential of tooth damage not only by oral hygiene products and salivary substitutes but also by chewable and effervescent tablets. Several paediatric medications show a direct erosive potential in vitro. Clinical proof of the occurrence of erosion after use of these medicaments is still lacking. However, regular and prolonged use of these medicaments might bear the risk of causing erosion. Additionally, it can be assumed that patients suffering from xerostomia should be aware of the potential effects of oral hygiene products with low pH and high titratable acidity.

  7. Comparison Between Biofilm Production, Phospholipase and Haemolytic Activity of Different Species of Candida Isolated from Dental Caries Lesions in Children

    PubMed Central

    Shenoy, Neetha

    2016-01-01

    Introduction C.albicans is the most commonly isolated fungal pathogen in the oral cavity, but isolation of non-albicans Candida is increasing in recent years. We wish to demonstrate the virulence factors of Candida spp. isolated from the dental caries lesion of the children as presence of virulence factors determines the pathogenic potential of any microorganism. Aim To compare biofilm production, phospholipase and haemolytic activity of C.albicans with that of non-albicans species of Candida isolated from dental caries lesions of children to evaluate the role of non- albicans species of Candida in formation of dental caries. Materials and Methods Oral swabs were collected from caries lesion of 100 school children of age 5-10 years with dental caries. Candida isolates were tested for biofilm production, phospholipase and haemolytic activity. Statistical analysis was done by Chi-Square test and Mann-Whitney U test wherever applicable using SPSS version 11.5. Results Out of the 100 children with dental caries 37 were positive for Candida by smear or culture and 31 by culture. C.albicans was the most prevalent isolate followed by C.krusei, C.tropicalis and C.albicans. Out of 21 C.albicans isolates, 10 (47.6%) showed phospholipase activity and 18 (85.71%) produced biofilm. Of the 10 non-albicans strains, 5 (50%) showed phospholipase activity and 6 (60%) produced biofilm. All isolates of Candida produced haemolysin (100%). Conclusion There was no statistically relevant difference between the virulence factor production by C.albicans and non-albicans species of Candida. In other words, our study shows that both C.albicans and non-albicans species of Candida isolated from caries lesions of the children, produce these virulence factors. So we can say that non-albicans species of Candida also are involved in caries formation. PMID:27190803

  8. The Marketplace for New Caries Management Products: Dental Caries Detection and Caries Management by Risk Assessment

    PubMed Central

    Berg, Joel H

    2006-01-01

    The number of new technologies emerging each year in the realm of dental caries management is growing at an exponential rate. Examining the patent literature, one can see that this growth rate will likely continue, with the outcome that dentistry will see an expanded growth in managing dental caries by risk assessment with medicinal therapeutic interventions. Restorative dentistry solutions, treating the results of dental caries, will continue to grow, while technologies to identify the caries process at its earliest stages will soon invade practices everywhere. The most interesting aspect of these changes will be how industry responds to the inexorable, yet slow change in dental professional demand for these new technologies, while trying to be the "first to market" within the various categories of this business opportunity. This paper will take a close look at how businesses with the core competence to be key players in this emerging growth category will assess the marketplace, and match up their business interests with the changing needs of the dental profession. The paper will also address the strategic planning and business processes that the dental industry will undertake to bring new technologies to market, and how these technologies will be positioned to health care professionals and consumers. The results of the key interactions between industry and the dental profession will determine the extent to which dental caries is managed as a disease, in addition to being managed by surgical restorative interventions. PMID:16934123

  9. SAGE III/Meteor - 3M

    NASA Technical Reports Server (NTRS)

    1999-01-01

    From left to right: Richard Rawls, Chip Holloway, and Art Hayhurst standing next to the Stratospheric Aerosol Gastropheric Experiment (SAGE)/Meteor - 3M flight instrument. Photographed in building 1250, 40 foot clean room.

  10. SAGE III/Meteor - 3M

    NASA Technical Reports Server (NTRS)

    1999-01-01

    Back view of the SAGE III Bench Checkout Unit, Portable Image Generator (PIG) on tripod, and the Stratospheric Aerosol Gastropheric Experiment (SAGE)/Meteor - 3M flight instrument. Photographed in building 1250, 40 foot clean room.

  11. SAGE III/Meteor - 3M

    NASA Technical Reports Server (NTRS)

    1999-01-01

    Full view of the SAGE III Bench Checkout Unit, Collimated Source Bench (CSB), Portable Image Generator (PIG) on tripod, and Stratospheric Aerosol Gastropheric Experiment (SAGE)/Meteor - 3M flight instrument. Photographed in building 1250, 40 foot clean room.

  12. Computer-Assisted System to Automate Production of Posterior Dental Restorations

    NASA Astrophysics Data System (ADS)

    Rekow, E. Dianne; Erdman, Arthur G.; Speidel, T. Michael

    1986-07-01

    The feasibility of a system which is capable of automating production of posterior dental restorations has been investigated. Data acquisition can be accomplished in a clinical setting using standard equipment to obtain stereoscopic views of the prepared tooth, adjacent and opposing teeth, and the jaw in motion. Data from the patient is digitized with a very high resolution digitizer. Stereophotogrammetric reconstruction and kinematic analysis establish the three-dimensional envelope in which the restoration must function. Ideal tooth profiles have been digitized for each of the fourteen unique teeth. Each tooth profile is represented by B-spline or Bezier curves and surfaces. Utilizing local influence properties of these curves and surfaces, the ideal profile can be modified to provide proper function and fill the available space, yielding a morphologically correct restor-ation which meets the unique design requirements for a specific patient. Spline curves and surfaces also ensure that the surfaces are well behaved, without discontinuities. This property facilitates generation of tool paths for numerically controlled machining. The latest version of Control Data Corporation's ICEM-DDN package, with its interface with the newly developed graphics programming language (GPL) is used to create those tool paths. Special consideration is given to unique requirements of mating internal and external sur-faces as well as to high precision, small size manufacturing.

  13. Investigating solid waste production and associated management practices in private dental units

    SciTech Connect

    Kontogianni, S. Xirogiannopoulou, A.; Karagiannidis, A.

    2008-07-01

    In the municipality of Thessaloniki in 2006 mercury-bearing dental wastes were not managed properly by 80% of dentists and metal-bearing waste was handled in accordance with internationally established best management practices by less than 50% of dentists. Those results were documented through a biennial field-based research study that took place in private dental units within the Thessaloniki Urban Area. For quantifying the waste produced, structured questionnaires were used and interviews with dentists were performed. In the present work, results of this survey are presented; critical parameters and factors affecting the quantity and quality of the dental waste stream are reported together with the analysis and classification of dominant conditions and needs of the dental sector in the waste management field.

  14. International dental standards.

    PubMed

    Jones, Derek W

    2007-09-22

    International dental standards are vital in maintaining the safety and quality of both the products and materials used by dental professionals and the many oral health products used by members of the general public, yet many dentists will be unaware of the role standards play in their daily practice. In this article, Derek W. Jones outlines the vital work of the International Standards Organization and highlights how standards pervade nearly every dental procedure.

  15. 78 FR 27971 - Dental Products Panel of the Medical Devices Advisory Committee; Notice of Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-13

    ... biocompatible material, such as commercially pure titanium, with sufficient strength to support a dental... part of the proposed order (FDA-2012-N- 0677). FDA intends to make background material available to the public no later than 2 business days before the meeting. If FDA is unable to post the background...

  16. Dinosaur extinction: closing the '3 m gap'.

    PubMed

    Lyson, Tyler R; Bercovici, Antoine; Chester, Stephen G B; Sargis, Eric J; Pearson, Dean; Joyce, Walter G

    2011-12-23

    Modern debate regarding the extinction of non-avian dinosaurs was ignited by the publication of the Cretaceous-Tertiary (K-T) asteroid impact theory and has seen 30 years of dispute over the position of the stratigraphically youngest in situ dinosaur. A zone devoid of dinosaur fossils reported from the last 3 m of the Upper Cretaceous, coined the '3 m gap', has helped drive controversy. Here, we report the discovery of the stratigraphically youngest in situ dinosaur specimen: a ceratopsian brow horn found in a poorly rooted, silty, mudstone floodplain deposit located no more than 13 cm below the palynologically defined boundary. The K-T boundary is identified using three criteria: (i) decrease in Cretaceous palynomorphs without subsequent recovery, (ii) the existence of a 'fern spike', and (iii) correlation to a nearby stratigraphic section where primary extraterrestrial impact markers are present (e.g. iridium anomaly, spherules, shocked quartz). The in situ specimen demonstrates that a gap devoid of non-avian dinosaur fossils does not exist and is inconsistent with the hypothesis that non-avian dinosaurs were extinct prior to the K-T boundary impact event.

  17. Strategic stories: how 3M is rewriting business planning.

    PubMed

    Shaw, G; Brown, R; Bromiley, P

    1998-01-01

    Virtually all business plans are written as a list of bullet points. Despite the skill or knowledge of their authors, these plans usually aren't anything more than lists of "good things to do." For example: Increase sales by 10%. Reduce distribution costs by 5%. Develop a synergistic vision for traditional products. Rarely do these lists reflect deep thought or inspire commitment. Worse, they don't specify critical relationships between the points, and they can't demonstrate how the goals will be achieved. 3M executive Gordon Shaw began looking for a more coherent and compelling way to present business plans. He found it in the form of strategic stories. Telling stories was already a habit of mind at 3M. Stories about the advent of Post-it Notes and the invention of masking tape help define 3M's identity. They're part of the way people at 3M explain themselves to their customers and to one another. Shaw and his coauthors examine how business plans can be transformed into strategic narratives. By painting a picture of the market, the competition, and the strategy needed to beat the competition, these narratives can fill in the spaces around the bullet points for those who will approve and those who will implement the strategy. When people can locate themselves in the story, their sense of commitment and involvement is enhanced. By conveying a powerful impression of the process of winning, narrative plans can mobilize an entire organization.

  18. Dental Procedures.

    PubMed

    Ramponi, Denise R

    2016-01-01

    Dental problems are a common complaint in emergency departments in the United States. There are a wide variety of dental issues addressed in emergency department visits such as dental caries, loose teeth, dental trauma, gingival infections, and dry socket syndrome. Review of the most common dental blocks and dental procedures will allow the practitioner the opportunity to make the patient more comfortable and reduce the amount of analgesia the patient will need upon discharge. Familiarity with the dental equipment, tooth, and mouth anatomy will help prepare the practitioner for to perform these dental procedures.

  19. Filler particles used in dental biomaterials induce production and release of inflammatory mediators in vitro.

    PubMed

    Ansteinsson, Vibeke E; Samuelsen, Jan Tore; Dahl, Jon E

    2009-04-01

    Although dental composites are in extensive use today, little is known about the biological effects of the filler particles. As composite materials are gradually broken down in the aggressive environment of the oral cavity, the filler particles may leak and induce toxic effects on the surrounding tissue and cells. The aim of this study was to elucidate possible adverse biological effects of commonly used dental filler particles; bariumaluminiumsilica (BaAlSi) and bariumaluminiumfluorosilica (BaAlFSi) with mean size of 1 microm. BEAS-2B cells were used as a model system. Particle morphology, mean particle size in solution, and particle surface charge were determined by scanning electron microscopy and Malvern zetasizer technology, respectively. Enzyme-linked immunosorbent assay was used to detect secretion of cytokine and chemokine (IL-8 and IL-6) and quantitative PCR for detection of gene activity. Both types of particle increased the release of IL-6 and IL-8 in a dose-dependent manner. BaAlFSi particles induced a more marked IL-8 response compared to BaAlSi particles, whereas no significant difference was observed for the IL-6 response. Mechanistic studies using specific inhibitors and activators indicated that cyclic AMP-dependent protein kinase A is partly involved in the observed IL-8 response. In conclusion, we consider dental filler particles to have potential to induce adverse biological response in cell cultures.

  20. Comparison of ionisation chamber and semiconductor detector devices for measurement of the dose-width product for panoramic dental units.

    PubMed

    Mitchell, S A; Martin, C J

    2013-06-01

    Doses for panoramic dental radiography are assessed in terms of the dose-width product (DWP) or dose-area product, which gives a measure of the radiation through a whole exposure. The DWP can be measured using a pencil ionisation chamber (IC) similar to that used for computed tomography dose assessment. However, ICs are sensitive to radiation incident from all directions and so backscatter from the image receptor may increase the recorded dose. This study compares measurements performed using four options: a pencil IC mounted straight on the image receptor, the IC mounted with a steel plate to the rear to standardise scatter conditions, the IC mounted with a steel plate and lead collimators in front to minimise the effect of extra-focal radiation, and a Quart Dido employing a one square centimetre semiconductor detector (SD) designed for panoramic measurements. The results indicate that modification of the current method by incorporating a steel plate reduced the measurement dose by 7% on average, but the reduction was greater for units with semiconductor imaging plates. The measurements with the SD agree more closely with the IC with the steel plate to the rear. An IC with a backing plate to standardise scatter or a suitable SD is recommended for measurement on panoramic dental units.

  1. Overexpression of receptor for advanced glycation end products and high-mobility group box 1 in human dental pulp inflammation.

    PubMed

    Tancharoen, Salunya; Tengrungsun, Tassanee; Suddhasthira, Theeralaksna; Kikuchi, Kiyoshi; Vechvongvan, Nuttavun; Tokuda, Masayuki; Maruyama, Ikuro

    2014-01-01

    High mobility group box 1 (HMGB1), a nonhistone DNA-binding protein, is released into the extracellular space and promotes inflammation. HMGB1 binds to related cell signaling transduction receptors, including receptor for advanced glycation end products (RAGE), which actively participate in vascular and inflammatory diseases. The aim of this study was to examine whether RAGE and HMGB1 are involved in the pathogenesis of pulpitis and investigate the effect of Prevotella intermedia (P. intermedia) lipopolysaccharide (LPS) on RAGE and HMGB1 expression in odontoblast-like cells (OLC-1). RAGE and HMGB1 expression levels in clinically inflamed dental pulp were higher than those in healthy dental pulp. Upregulated expression of RAGE was observed in odontoblasts, stromal pulp fibroblasts-like cells, and endothelial-like cell lining human pulpitis tissue. Strong cytoplasmic HMGB1 immunoreactivity was noted in odontoblasts, whereas nuclear HMGB1 immunoreactivity was seen in stromal pulp fibroblasts-like cells in human pulpitis tissue. LPS stimulated OLC-1 cells produced HMGB1 in a dose-dependent manner through RAGE. HMGB1 translocation towards the cytoplasm and secretion from OLC-1 in response to LPS was inhibited by TPCA-1, an inhibitor of NF-κB activation. These findings suggest that RAGE and HMGB1 play an important role in the pulpal immune response to oral bacterial infection.

  2. Professional dental and oral surgery liability in Italy: a comparative analysis of the insurance products offered to health workers

    PubMed Central

    Paternoster, Mariano; Nugnes, Mariarosaria; Pantaleo, Giuseppe; Graziano, Vincenzo; Niola, Massimo

    2016-01-01

    Abstract Introduction In Italy there has been an increase in claims for damages for alleged medical malpractice. A study was therefore conducted that aimed at assessing the content of the coverage of insurance policy contracts offered to oral health professionals by the insurance market. Material and methods The sample analysed composed of 11 insurance policy contracts for professional dental liability offered from 2010 to 2015 by leading insurance companies operating in the Italian market. Results The insurance products analysed are structured on the “claims made” clause. No policy contract examined covers the damage due to the failure to acquire consent for dental treatment and, in most cases, damage due to unsatisfactory outcomes of treatment of an aesthetic nature and the failure to respect regulatory obligations on privacy. Discussion On entering into a professional liability insurance policy contract, the dentist should pay particular attention to the period covered by the guarantee, the risks both covered and excluded, as well as the extent of the limit of liability and any possible fixed/percentage excess. Conclusions When choosing a professional liability contract, a dentist should examine the risks in relation to the professional activity carried out before signing. PMID:28352805

  3. Inhibitory effect of sorbitol on sugar metabolism of Streptococcus mutans in vitro and on acid production in dental plaque in vivo.

    PubMed

    Takahashi-Abbe, S; Abbe, K; Takahashi, N; Tamazawa, Y; Yamada, T

    2001-04-01

    This study was conducted to find out whether sorbitol inhibits the sugar metabolism of Streptococcus mutans in vitro and the acid production in dental plaque in vivo. S. mutans NCIB 11723 was anaerobically grown in sorbitol-containing medium. The rate of acid production from sugars was estimated with a pH stat. The rate of acid production from glucose or sucrose was not changed at various concentrations of oxygen. By the addition of sorbitol to sugar, however, the acid production was decreased with increasing levels of oxygen. Intracellular NADH/NAD+ ratio and (dihydroxyacetone-phosphate+glyceraldehyde-phosphate)/3-phosphoglycerate ratio were high whenever the acid production was inhibited by sorbitol. Sorbitol also inhibited the acid production in dental plaque in vivo. These results suggest that the increased NADH/NAD+ ratio during sorbitol metabolism through the inactivation of pyruvate formate-lyase by oxygen inhibited glyceraldehyde-phosphate dehydrogenase and then the acid production of S. mutans and the one in dental plaque.

  4. Dental Assistants

    MedlinePlus

    ... help keep the dental office running smoothly. Important Qualities Detail oriented. Dental assistants must follow specific rules and protocols, such as infection control procedures, when helping dentists treat patients. Assistants also ...

  5. Portable Dental System

    NASA Technical Reports Server (NTRS)

    1980-01-01

    Portable dental system provides dental care in isolated communities. System includes a patient's chair and a dentist's stool, an X-ray machine and a power unit, all of which fold into compact packages. A large yellow "pumpkin" is a collapsible compressed air tank. Portable system has been used successfully in South America in out of the way communities with this back-packable system, and in American nursing homes. This product is no longer manufactured.

  6. Dental OCT

    NASA Astrophysics Data System (ADS)

    Colston, Bill W.; Sathyam, Ujwal S.; Dasilva, Luiz B.; Everett, Matthew J.; Stroeve, Pieter; Otis, L. L.

    1998-09-01

    We present here the first in vivo optical coherence tomography (OCT) images of human dental tissue. A novel dental optical coherence tomography system has been developed. This system incorporates the interferometer sample arm and transverse scanning optics into a handpiece that can be used intraorally to image human dental tissues. The average imaging depth of this system varied from 3 mm in hard tissues to 1.5 mm in soft tissues. We discuss the application of this imaging system for dentistry and illustrate the potential of our dental OCT system for diagnosis of periodontal disease, detection of caries, and evaluation of dental restorations.

  7. Part 3 of a 4-part series Lip and Common Dental Care Products: Trends and Alternatives

    PubMed Central

    Jacob, Sharon; Katta, Rajani; Nedorost, Susan; Warshaw, Erin; Zirwas, Matt; Kruk, Ann

    2011-01-01

    Objective: To provide updated data on the use of ingredients that are common potential contact allergens in several categories of lip and oral products. To identify useful alternative products with few or no common contact allergens. Design: In November 2009, the full ingredient lists of 5,416 skin, hair, and cosmetic products marketed by the CVS pharmacy chain was copied from CVS.com into Microsoft Word format for analysis. Computer searches were made in Microsoft Word using search/replace and sorting functions to accurately identify the presence of specific allergens in each website product. Measurements: Percentages of American Contact Dermatitis Society core series allergens (and other common preservatives) were calculated. Results: The use of American Contact Dermatitis Society core series allergens (and other preservatives) in various categories of lip and oral products are reported. Conclusion: Data on allergens and alternatives for lip and oral products is not widely published. This article reviews some of the common potential allergens in lip liners, lipsticks, lip moisturizers, mouthwashes, and toothpastes. Suitable available alternative products for patients with contact allergy are listed. PMID:21938270

  8. Dental sepsis.

    PubMed

    Mueller, P O; Lowder, M Q

    1998-08-01

    Dental sepsis or periapical abscess formation constitutes a large percentage of dental conditions that afflict horses. Dental sepsis occurs when the pulp chamber of the tooth is exposed to the oral cavity or external environment, allowing bacterial localization with resulting infection. Although acute, primary, septic pulpitis in horses is rare, dental sepsis often results from colonization of the pulp chamber with pathogenic bacteria secondary to maleruption or impaction of teeth with secondary alveolar bone lysis, primary fractures of the tooth, mandible, or maxilla, periodontal disease, or infundibular necrosis. The sequela to pulpal infection are extensions into the periradicular tissues and mandibular or maxillary periapical abscess formation.

  9. Dental Hygienist.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Center on Education and Training for Employment.

    This document, which is designed for use in developing a tech prep competency profile for the occupation of dental hygienist, lists technical competencies and competency builders for 13 units pertinent to the health technologies cluster in general and 9 units specific to the occupation of dental hygienist. The following skill areas are covered in…

  10. Dental Implants.

    PubMed

    Zohrabian, Vahe M; Sonick, Michael; Hwang, Debby; Abrahams, James J

    2015-10-01

    Dental implants restore function to near normal in partially or completely edentulous patients. A root-form implant is the most frequently used type of dental implant today. The basis for dental implants is osseointegration, in which osteoblasts grow and directly integrate with the surface of titanium posts surgically embedded into the jaw. Radiologic assessment is critical in the preoperative evaluation of the dental implant patient, as the exact height, width, and contour of the alveolar ridge must be determined. Moreover, the precise locations of the maxillary sinuses and mandibular canals, as well as their relationships to the site of implant surgery must be ascertained. As such, radiologists must be familiar with implant design and surgical placement, as well as augmentation procedures utilized in those patients with insufficient bone in the maxilla and mandible to support dental implants.

  11. Efficient 3M PBS enhancing miniature projection optics

    NASA Astrophysics Data System (ADS)

    Yun, Zhisheng; Nevitt, Timothy; Willett, Stephen; Mortenson, Dave; Le, John; McDowell, Erin; Kent, Susan; Wong, Timothy; Beniot, Gilles J.; Ouderkirk, Andrew

    2016-09-01

    Over the past decade, 3M has developed a number of mobile projectors, with a goal towards providing the world's smallest, most efficient projection systems. Compact size and efficiency are required characteristics for projection systems used in mobile devices and more lately, in augmented reality systems. In this paper we summarize the main generations of 3M light engine optical designs. We present the optical architectures of four light engines, including the rationale behind the illumination designs and the projection systems. In particular, we describe various configurations relating to the 3M polarizing beam splitter (PBS) which is key to enhanced efficiency of the miniature projection systems.

  12. Dental OCT

    NASA Astrophysics Data System (ADS)

    Wilder-Smith, Petra; Otis, Linda; Zhang, Jun; Chen, Zhongping

    This chapter describes the applications of OCT for imaging in vivo dental and oral tissue. The oral cavity is a diverse environment that includes oral mucosa, gingival tissues, teeth and their supporting structures. Because OCT can image both hard and soft tissues of the oral cavity at high resolution, it offers the unique capacity to identity dental disease before destructive changes have progressed. OCT images depict clinically important anatomical features such as the location of soft tissue attachments, morphological changes in gingival tissue, tooth decay, enamel thickness and decay, as well as the structural integrity of dental restorations. OCT imaging allows for earlier intervention than is possible with current diagnostic modalities.

  13. Registered Dental Hygienists as Dental Students.

    ERIC Educational Resources Information Center

    Arnold, Janet; Shugars, Daniel A.

    1985-01-01

    Surveys conducted to (1) investigate why dental hygienists choose to become dentists, (2) evaluate their success in dental school, (3) assess the experience of those who had entered dental school, and (4) gauge the level of interest among dental hygienists in applying to dental school are discussed. (Author/MLW)

  14. Dental sealants

    MedlinePlus

    ... few quick steps. There is no drilling or scraping of the molars. Your dentist will: Clean the ... Dental sealants. Updated October 19, 2016. ADA.org Web site. www.ada.org/en/member-center/oral- ...

  15. Dental Sealants

    MedlinePlus

    ... form does not collect any actual information. External Web Site Policy This graphic notice ( ) means that you are ... the link. Home Contact Us Viewers and Players Site Map FOIA Web Policies Privacy Policy National Institute of Dental and ...

  16. 75 FR 16511 - Pentron Clinical Technologies, a Wholly-Owned Subsidiary of Kerr Dental/Sybron Dental...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-01

    ... such as dental prosthetics, dental composites, dental impressions, dental adhesives, and other dental... prosthetics, dental composites, dental impressions, dental adhesives, and other dental materials to...

  17. Dental Emergencies

    PubMed Central

    Symington, J.M.

    1988-01-01

    Patients with dental emergencies sometimes present to their physician. This article outlines the role of the physician in the management of dental patients who have suffered traumatic injuries, postoperative hemorrhage, pain, and infection. It deals with those difficulties for which the physician may easily prescribe treatment and outlines the treatment that would be undertaken by a dentist who receives such a patient on referral. PMID:21253249

  18. Tooth Tissue Engineering: The Importance of Blood Products as a Supplement in Tissue Culture Medium for Human Pulp Dental Stem Cells.

    PubMed

    Pisciolaro, Ricardo Luiz; Duailibi, Monica Talarico; Novo, Neil Ferreira; Juliano, Yara; Pallos, Debora; Yelick, Pamela Crotty; Vacanti, Joseph Phillip; Ferreira, Lydia Masako; Duailibi, Silvio Eduardo

    2015-11-01

    One of the goals in using cells for tissue engineering (TE) and cell therapy consists of optimizing the medium for cell culture. The present study compares three different blood product supplements for improved cell proliferation and protection against DNA damage in cultured human dental pulp stem cells for tooth TE applications. Human cells from dental pulp were first characterized as adult stem cells (ectomesenchymal mixed origin) by flow cytometry. Next, four different cell culture conditions were tested: I, supplement-free; II, supplemented with fetal bovine serum; III, allogeneic human serum; and IV, autologous human serum. Cultured cells were then characterized for cell proliferation, mineralized nodule formation, and colony-forming units (CFU) capability. After 28 days in culture, the comet assay was performed to assess possible damage in cellular DNA. Our results revealed that Protocol IV achieved higher cell proliferation than Protocol I (p = 0.0112). Protocols II and III resulted in higher cell proliferation than Protocol I, but no statistical differences were found relative to Protocol IV. The comet assay revealed less cell damage in cells cultured using Protocol IV as compared to Protocols II and III. The damage percentage observed on Protocol II was significantly higher than all other protocols. CFUs capability was highest using Protocol IV (p = 0.0018) and III, respectively, and the highest degree of mineralization was observed using Protocol IV as compared to Protocols II and III. Protocol IV resulted in significantly improved cell proliferation, and no cell damage was observed. These results demonstrate that human blood product supplements can be used as feasible supplements for culturing adult human dental stem cells.

  19. The 3M complex maintains microtubule and genome integrity

    PubMed Central

    Yan, Jun; Yan, Feng; Li, Zhijun; Sinnott, Becky; Cappell, Kathryn M.; Yu, Yanbao; Mo, Jinyao; Duncan, Joseph A.; Chen, Xian; Cormier-Daire, Valerie; Whitehurst, Angelique W.; Xiong, Yue

    2014-01-01

    SUMMARY CUL7, OBSL1, and CCDC8 genes are mutated in a mutually exclusive manner in 3M and other growth retardation syndromes. The mechanism underlying the function of the three 3M genes in development is not known. We found that OBSL1 and CCDC8 form a complex with CUL7 and regulate the level and centrosomal localization of CUL7, respectively. CUL7 depletion results in altered microtubule dynamics, prometaphase arrest, tetraploidy and mitotic cell death. These defects are recaptured in CUL7 mutated 3M cells and can be rescued by wild-type, but not 3M patients-derived CUL7 mutants. Depletion of either OBSL1 or CCDC8 results in similar defects and sensitizes cells to microtubule damage as loss of CUL7 function. Microtubule damage reduces the level of CCDC8 that is required for the centrosomal localization of CUL7. We propose that CUL7, OBSL1, and CCDC8 proteins form a 3M complex that functions in maintaining microtubule and genome integrity and normal development. PMID:24793695

  20. Patient-reported outcomes (PROs) in dental clinical trials and product development: introduction to scientific and regulatory considerations.

    PubMed

    Gwaltney, Chad J

    2010-06-01

    Although typically measured with objective assessments, treatment efficacy and disease progression may also be examined using reports directly from the patient (patient-reported outcomes or PROs). PROs can enhance clinician and researcher understanding of an illness and its treatment in multiple ways, ranging from an assessment of core signs and symptoms to assessment of impairments and impacts across a variety of domains (eg, physical, social, occupational, emotional). Regulated drug and medical device development programs are increasingly using PROs as endpoints to support label claims. PRO instruments are commonly implemented in dental clinical trials. Concepts such as dental pain, tooth sensitivity, eating discomfort, and speech impairments may all be assessed via PROs. Although PROs are commonly implemented in trials, it is not clear that the development, use, and interpretation of PROs are consistent with scientific and regulatory best practices. The goals of this article were to introduce the concept of PROs and to provide an introduction to PRO scientific and regulatory principles. These principles can be used as a blueprint for using PROs in clinical research and for evaluating trials that have implemented PROs. When used appropriately, PROs may be useful in understanding the patient's perspective on illness and interventions and this perspective may be critical in fully evaluating the efficacy of dental treatments.

  1. Dental Calculus Arrest of Dental Caries

    PubMed Central

    Keyes, Paul H.; Rams, Thomas E.

    2016-01-01

    Background An inverse relationship between dental calculus mineralization and dental caries demineralization on teeth has been noted in some studies. Dental calculus may even form superficial layers over existing dental caries and arrest their progression, but this phenomenon has been only rarely documented and infrequently considered in the field of Cariology. To further assess the occurrence of dental calculus arrest of dental caries, this study evaluated a large number of extracted human teeth for the presence and location of dental caries, dental calculus, and dental plaque biofilms. Materials and methods A total of 1,200 teeth were preserved in 10% buffered formal saline, and viewed while moist by a single experienced examiner using a research stereomicroscope at 15-25× magnification. Representative teeth were sectioned and photographed, and their dental plaque biofilms subjected to gram-stain examination with light microscopy at 100× magnification. Results Dental calculus was observed on 1,140 (95%) of the extracted human teeth, and no dental carious lesions were found underlying dental calculus-covered surfaces on 1,139 of these teeth. However, dental calculus arrest of dental caries was found on one (0.54%) of 187 evaluated teeth that presented with unrestored proximal enamel caries. On the distal surface of a maxillary premolar tooth, dental calculus mineralization filled the outer surface cavitation of an incipient dental caries lesion. The dental calculus-covered carious lesion extended only slightly into enamel, and exhibited a brown pigmentation characteristic of inactive or arrested dental caries. In contrast, the tooth's mesial surface, without a superficial layer of dental calculus, had a large carious lesion going through enamel and deep into dentin. Conclusions These observations further document the potential protective effects of dental calculus mineralization against dental caries. PMID:27446993

  2. 76 FR 70443 - Decision on Waiver Application From 3M

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-11-14

    ...: Notice. SUMMARY: EPA conditionally granted the request from 3M for a waiver from testing tetrabromobisphenol A (CASRN 79-94-7). Regulations issued by EPA under section 4 of the Toxic Substances Control Act... application is submitted to EPA and is approved. EPA received such a request for a waiver from these...

  3. Deployment of a Pair of 3 M telescopes in Utah

    SciTech Connect

    Finnegan, G.; Adams, B.; Butler, K.; Cardoza, J.; Colin, P.; Hui, C. M.; Kieda, D.; Kirkwood, D.; Kress, D.; Kress, M.; LeBohec, S.; McGuire, C.; Newbold, M.; Nunez, P.; Pham, K.

    2008-12-24

    Two 3 m telescopes are being installed in Grantsville Utah. They are intended for the testing of various approaches to the implementation of intensity interferometry using Cherenkov Telescopes in large arrays as receivers as well as for the testing of novel technology cameras and electronics for ground based gamma-ray astronomy.

  4. Stephen Hawking bags big new 3m physics prize

    NASA Astrophysics Data System (ADS)

    Johnston, Hamish

    2013-01-01

    A massive 3m in prize money has gone to the British cosmologist Stephen Hawking for his work on black holes, quantum gravity and the early universe. The award is one of two "special fundamental physics prizes" from the Fundamental Physics Prize Foundation, which was set up earlier this year by the Russian physicist-turned-entrepreneur Yuri Milner.

  5. Dental Caries

    PubMed Central

    Burgess, Ralph C.

    1988-01-01

    Dental caries is one of the most prevalent diseases afflicting mankind. It reached a peak in the 1950s but has been declining drastically in recent years in children and young adults. This article describes the three contributing factors in dental caries: microbial plaque, tooth susceptibility, and diet, and discusses practical preventive measures which help to reduce caries incidence. Some of these, such as vaccines and antimicrobial varnishes, are still in the research stages, while others, such as sucrose substitutes, low-calorie sweeteners, and limitation of frequency of sugar snacks are well established and can be promoted by family physicians. PMID:21253193

  6. Acemannan, an extracted product from Aloe vera, stimulates dental pulp cell proliferation, differentiation, mineralization, and dentin formation.

    PubMed

    Jittapiromsak, Nawaporn; Sahawat, Dusida; Banlunara, Wijit; Sangvanich, Polkit; Thunyakitpisal, Pasutha

    2010-06-01

    This study investigated the effect of acemannan (Aloe vera gel polysaccharide) on dentin formation. Primary human dental pulp cells were treated with acemannan. New DNA synthesis, bone morphogenetic protein-2, alkaline phosphatase activity, dentin sialoprotein expression, and mineralization were determined by [(3)H]-thymidine incorporation, enzyme-linked immunosorbent assay, biochemical assay, western blotting, and Alizarin Red staining, respectively. Then the upper first molars of 24 male Sprague Dawley rats were intentionally exposed and capped with either acemannan or calcium hydroxide. At day 28, the teeth were histopathologically examined and evaluated for the degree of inflammation, dentin bridge formation, and pulp tissue organization. The results revealed that acemannan significantly increased pulp cell proliferation, bone morphogenetic protein-2, alkaline phosphatase activity, dentin sialoprotein expression, and mineralization, compared with the untreated group. The acemannan-treated group also exhibited a complete homogeneous calcified dentin bridge and good pulp tissue organization, whereas neither was detected in the calcium hydroxide-treated and sham groups. In the acemannan-treated group, either mild or no inflammation was found, whereas the other groups had various degrees of inflammation. The data suggest that acemannan promotes dentin formation by stimulating primary human dental pulp cell proliferation, differentiation, extracellular matrix formation, and mineralization. Acemannan also has pulpal biocompatibility and promotes soft tissue organization.

  7. Testing of the 3M Company Composite Conductor

    SciTech Connect

    Stovall, John P; Rizy, D Tom; Kisner, Roger A

    2010-10-01

    The 3M Company has developed a high-temperature low-sag conductor referred to as Aluminum-Conductor Composite-Reinforced or ACCR. The conductor uses an aluminum metal matrix material to replace the steel in conventional conductors. The objective of this work is to accelerate the commercial acceptance by electric utilities of this new conductor design by testing four representative conductor classes in controlled conditions. A unique facility called the Powerline Conductor Accelerated Testing (PCAT) Facility was built at ORNL for testing overhead conductors. The PCAT has been uniquely designed for testing overhead bare transmission line conductors at high currents and temperatures after they have been installed and tensioned to the manufacturer's specifications. The ability to operate a transmission line conductor in this manner does not exist elsewhere in the United States. Four classes of ACCR cable designed by the 3M Company have been successfully test at ORNL small, medium, large and small/compact. Based on these and other manufacturer tests, the 3M Company has successfully introduced the ACCR into the commercial market and has completed over twenty installations for utility companies.

  8. Concerning neutral flux shielding in the U-3M torsatron

    SciTech Connect

    Dreval, N. B.

    2015-03-15

    The volume of the torsatron U-3M vacuum chamber is about 70 m{sup 3}, whereas the plasma volume is about 0.3 m{sup 3}. The large buffer volume of the chamber serves as a source of a substantial neutral flux into the U-3M plasma. A fraction of this flux falls onto the torsatron helical coils located in front of the plasma, due to which the dynamics of neutral influx into the plasma modifies. The shielding of the molecular flux from the buffer volume into the plasma is estimated using numerical calculations. Only about 10% of the incident flux reaches the plasma volume. Estimates show that about 20% of atoms escape beyond the helical coils without colliding with them. Under these conditions, the helical coils substantially affect the neutral flux. A discharge regime with a hot low-density plasma produced by a frame antenna is considered. The spatial distribution of the molecular density produced in this regime by the molecular flux from the chamber buffer volume after it has passed between the helical coils is calculated. The contributions of the fluxes emerging from the side and inner surfaces of the helical coils are considered. The calculations show that the shape of the spatial distribution of the molecular density differs substantially from the shape of the magnetic surfaces.

  9. Cost and Performance Report 3M Selective Separation Cartridges

    SciTech Connect

    Pickett, J.B.

    2000-12-19

    In the summer of 1998, the Department of Energy's Office of Environmental Management (EM-50) initiated a water treatment project through its Accelerated Site Technology Deployment (ASTD) program at the Savannah River Site (DOE-SR, 1999). The purpose of the ASTD project was to deploy new and innovative water treatment technologies - that offer significant improvements over existing baseline technologies - in the removal of cesium and strontium from contaminated water. One of the technologies selected by EM-50 was the Selective Separation Cartridge, based on an innovative membrane technology developed the 3M Co., St. Paul, MN (OST-2000).The Savannah River Site is committed to deploy this Selective Separation Cartridge technology at other appropriate locations. It may be appropriate for other Reactor Disassembly Basins, or in-situ groundwater remediation. The deployment of this technology will be considered strongly as opportunities present themselves. The primary lesson learned is to anticipate and plan to reduce the radiation dose from a Cs-137 removal system to As Low As Reasonably Achievable (ALARA) concept. 3M did not include any mitigating actions in their original design and fabrication, primarily because the system was completely constructed before WSRC became deeply involved with the 3M/EM-50 project.

  10. Dental Training Films.

    ERIC Educational Resources Information Center

    Veterans Administration Medical Center, Washington, DC.

    This dental training films catalog is organized into two sections. Section I is a category listing of the films by number and title, indexed according to generalized headings; categories are as follow: anatomy, articulator systems, complete dentures, dental assisting, dental laboratory technology, dental materials, dental office emergencies,…

  11. Finding Dental Care

    MedlinePlus

    ... Finding Dental Care Where can I find low-cost dental care? Dental schools often have clinics that allow dental ... can I find more information? See Finding Low Cost Dental Care . ​​​​ WWNRightboxRadEditor2 Contact Us 1-866-232-4528 nidcrinfo@ ...

  12. Dental education and dental practice.

    PubMed Central

    Moore, J R

    1984-01-01

    This paper relates recent modes of dental practice to changes that the public and government are likely to ask the health care professions to make in the future. As usual they are asking for the best of all worlds. First, that we maintain the clinical model to the highest standards of personal dental care based and tested against the best research at our disposal, whilst we ensure there is no reduction in the high technical standards for which british dentists have a reputation. Second, that the profession is required to consider ways of providing care on the medicosocial model for the whole community at an economic level the country will afford. The broad changes in dental education have been reviewed, from the technical apprenticeship to the establishment of strong university departments in teaching hospitals. The importance of a sound biomedical foundation and of research both to education and the credibility of dental practice as a primary health care profession is stressed if the profession is to retain its position as a sister to medicine and not slide down to that of a technical ancillary. PMID:6374141

  13. Dental Implant Surgery

    MedlinePlus

    Dental implant surgery Overview By Mayo Clinic Staff Dental implant surgery is a procedure that replaces tooth roots with ... look and function much like real ones. Dental implant surgery can offer a welcome alternative to dentures ...

  14. Dental Holography

    NASA Astrophysics Data System (ADS)

    Dirtoft, Ingegerd

    1983-12-01

    Ten years have passed since the first articles appeared in this new field. The qualities of the laser light together with the need of contactless 3-D measurements for different dental purposes seemed to be extremely promising, but still just a few scientists have used the method and mostly for laboratory studies. For some reason there has been a preponderance for orthodontic measurements. This seems to be a bit peculiar from holographic view compared with measurements for engineering purposes, which usually are made on metals. So naturally holography can become a clinical tool for measurements in the field of fixed bridges, removable partial dentures and implants. One of the problems is that the need for holography in dental research must be fulfilled in collaboration with physicists. Only a two-way communication during an entire experiment can balance both technical and odontological demands and thus give practical and clinical important results. The need for an easy way of handling the evaluation to get all required information is another problem and of course the holographic equipment must be converted to a box easy to handle for everyone. At last the position of dental holography today is going to be carefully examined together with an attempt to look into the hopefully exciting and not to utopic future for this research field.

  15. Dental technicians: regulation and quality assurance.

    PubMed

    Newsome, P R H

    2011-01-08

    For many years, dental technicians were largely self-regulated and left to work without any undue interference from, or legislation by, outside authorities. This situation has changed somewhat dramatically in recent years, primarily as a result of a) mandatory General Dental Council (GDC) registration of UK-based dental technicians and b) the requirement to comply with certain EC directives governing the provision of dental appliances. There seems to be some confusion, however, about these various changes and the ensuing ramifications for dental practitioners. The purpose of this paper is firstly to clarify the various regulatory issues currently surrounding technician registration and the provision of laboratory work ('Made in Britain' or otherwise) and secondly to explore the various internationally-recognised quality assurance standards that can be applied to the production of such work in order to assist dentists in gauging quality-related claims made by dental laboratories, both in the UK and overseas.

  16. Hamline/3M Project: Liaison for Curricular Change

    NASA Astrophysics Data System (ADS)

    Rundquist, Andy

    2002-03-01

    This project was designed to catalyze curricular changes to better prepare students for the workplace. Industrial managers provided a list of 16 characteristics valued in the workplace: most were NOT related to science course content. The project formed 5 teams each including 3M professionals and students. Each team developed curricular changes in one of the 16 areas. Team goals were to improve skills in communication, data analysis, business/economics, team problem solving, and culture competency. Curricular changes realized include communication skill activities embodied in science courses and faculty communication teaching skill seminars, self learning tools in data analysis, statistics and model building, a new course developed with assistance from 3M personnel focussing on topics directly related to technological industries, high performance team problem solving training/coaching for faculty and workshops for students and faculty relative to importance of cultural competencies in the workplace, and a new course focusing on culture, team problem solving and conflict resolution in the technical workplace. Process for developing and content of curricular changes will be reported.

  17. Hamline/3M Corp. Project: Liason for Curricular Change*

    NASA Astrophysics Data System (ADS)

    Artz, Jerry L.

    2002-04-01

    This project was designed to catalyze curricular changes to better prepare students for the workplace. Industrial managers provided a list of 16 characteristics valued in the workplace; most were NOT related to science course content. The project formed 5 teams each including 3M professionals and students. Each team developed curricular changes in one of the 16 areas. Team goals were to improve skills in communication, data analysis, business/economics, team problem solving, and cultural competency. Curricular changes realized include communication skill activities embodied in science courses and faculty communication teaching skill seminars; self learning tools in data analysis, statistics and model building; a new course developed with assistance from 3M personnel focusing on topics directly related to technological industries; high performance team problem solving training/coaching for faculty; workshops for students and faculty relative to importance of cultural competencies in the workplace; and a new course focusing on culture, team problem solving and conflict resolution in the technical workplace. Process for developing and content of curricular changes will be reported. *Thanks to: NSF GOALI CHE-99010782

  18. 3M corporate incinerator environmental monitoring study and risk analysis

    SciTech Connect

    Stevens, J.B.; Elnabarawy, M.T.; Pilney, J.

    1998-12-31

    A one-year multi-media environmental monitoring study was performed around the 3M Cottage Grove Facility. Particulate metals from the 3M Corporate hazardous waste incinerator were the focus of the study. Two environmental media were of primary interest: area soil sampling was conducted to investigate the impact of past incinerator emissions on the environment, and ambient air monitoring was conducted to address current impacts. Over 180 soil samples were taken from both agricultural and forested land in the vicinity of the Facility. More than 25 chemical parameters were then quantified in the samples. The potential impacts of past emissions from the incinerator were assessed by comparing chemical concentrations from locations where incinerator impacts were expected to be greatest (based on air dispersion modeling) to chemical concentrations in matched samples from sites expected to be least impacted. The ambient air monitoring network consisted of six stations. Source-receptor modeling was used to determine the most likely contribution of the incinerator and six additional major area sources for the air monitoring (i.e. filter) data at each station. The model provided a best-fit analysis regarding the likely contributions of each source to the sample results. The results of these evaluations lead to the conclusion that the current emissions from this Facility do not present an unacceptable risk to human health.

  19. Communicating prosthetic prescriptions from dental students to the dental laboratory: is the message getting through?

    PubMed

    Parry, Glenn R; Evans, Jane L; Cameron, Andrew

    2014-12-01

    The aim of this research was to investigate the quality of written prosthetic prescriptions provided by fourth-year dental students to a commercially operated dental laboratory and to ascertain the contribution of interprofessional education to improving prescription quality. Based on guidelines established by the Medicines and Healthcare Products Regulatory Agency of the European Union (Medical Device Directive 93/42/EEC), an audit was conducted prior to and after an educational intervention was delivered by a dental technician to a dental student cohort at one Australian dental school. Prior to the intervention, thirty-nine dental prosthetic prescriptions were collected, analyzed, and audited to determine the clarity of written communication and instructions from dental student to dental technician. Following the intervention, a further forty prosthetic prescriptions were collected from the same cohort of students and were audited. The audit of the initial prescriptions showed that 85 percent (n=33) did not comply with the recommended conventions. After the intervention, the prescriptions that did not meet the guidelines had fallen to 30 percent (n=12) of the total. Improvements in prosthetic prescriptions submitted by these dental students to the commercial dental laboratory suggest there is an advantage to including a prosthetic prescription-writing module in dental school curricula.

  20. Evaluation of the effect of tooth and dental restoration material on electron dose distribution and production of photon contamination in electron beam radiotherapy.

    PubMed

    Bahreyni Toossi, Mohammad Taghi; Ghorbani, Mahdi; Akbari, Fatemeh; Mehrpouyan, Mohammad; Sobhkhiz Sabet, Leila

    2016-03-01

    The aim of this study is to evaluate the effect of tooth and dental restoration materials on electron dose distribution and photon contamination production in electron beams of a medical linac. This evaluation was performed on 8, 12 and 14 MeV electron beams of a Siemens Primus linac. MCNPX Monte Carlo code was utilized and a 10 × 10 cm(2) applicator was simulated in the cases of tooth and combinations of tooth and Ceramco C3 ceramic veneer, tooth and Eclipse alloy and tooth and amalgam restoration materials in a soft tissue phantom. The relative electron and photon contamination doses were calculated for these materials. The presence of tooth and dental restoration material changed the electron dose distribution and photon contamination in phantom, depending on the type of the restoration material and electron beam's energy. The maximum relative electron dose was 1.07 in the presence of tooth including amalgam for 14 MeV electron beam. When 100.00 cGy was prescribed for the reference point, the maximum absolute electron dose was 105.10 cGy in the presence of amalgam for 12 MeV electron beam and the maximum absolute photon contamination dose was 376.67 μGy for tooth in 14 MeV electron beam. The change in electron dose distribution should be considered in treatment planning, when teeth are irradiated in electron beam radiotherapy. If treatment planning can be performed in such a way that the teeth are excluded from primary irradiation, the potential errors in dose delivery to the tumour and normal tissues can be avoided.

  1. Regulating Dental Assistants: Revisions of the Michigan Dental Practice Act. Health Manpower Policy Discussion Paper Series No.: C2.

    ERIC Educational Resources Information Center

    Feldstein, Paul J.; And Others

    This document investigates the regulation of dental assistants in Michigan. Emphasis is placed on increased dental productivity from increased use of auxiliaries, utilization of dental auxiliaries, and educational and training requirements for certification and licensure. Results of the investigation indicate: (1) support should be given for the…

  2. Testing of the 3M Company ACCR Conductor

    SciTech Connect

    Stovall, J.P.; RIzy, D.T.; Kisner, R.A.; Deve, H.E.

    2010-09-15

    The 3M Company has developed a high-temperature low-sag conductor referred to as Aluminum- Conductor Composite-Reinforced or ACCR. The conductor uses an aluminum metal matrix material to replace the steel in conventional conductors so the core has a lower density and higher conductivity. The objective of this work is to accelerate the commercial acceptance by electric utilities of these new conductor designs by testing four representative conductor classes in controlled conditions. Overhead transmission lines use bare aluminum conductor strands wrapped around a steel core strands to transmit electricity. The typical cable is referred to as aluminum-conductor steel-reinforced (ACSR). The outer strands are aluminum, chosen for its conductivity, low weight, and low cost. The center strand is of steel for the strength required to support the weight without stretching the aluminum due to its ductility. The power density of a transmission corridor has been directly increased by increasing the voltage level. Transmission voltages have increased from 115-kV to 765- kV over the past 80 years. In the United States, further increasing the voltage level is not feasible at this point in time, so in order to further increase the power density of a transmission corridor, conductor designs that increase the current carrying capability have been examined. One of the key limiting factors in the design of a transmission line is the conductor sag which determines the clearance of the conductor above ground or underlying structures needed for electrical safety. Increasing the current carrying capability of a conductor increases the joule heating in the conductor which increases the conductor sag. A conductor designed for high-temperature and lowsag operation requires an engineered modification of the conductor materials. To make an advanced cable, the 3M Company solution has been the development of a composite conductor consisting of Nextel ceramic fibers to replace the steel core and

  3. Observations of 3-m auroral irregularities during the ERRRIS campaigns

    NASA Astrophysics Data System (ADS)

    Sahr, J. D.; Farley, D. T.; Swartz, W. E.; Providakes, J. F.; Pfaff, R. F.

    1992-06-01

    In the late winter of 1988 and 1989, three NASA sounding rockets were flown through the auroral electrojet from ESRANGE (Sweden) as part of the E-region Rocket-Radar Instability Study (ERRRIS). Many ground-based instruments supported these flights, including the EISCAT, STARE, and CUPRI radars, as well as all-sky cameras, riometers, and magnetometers. In this paper the observations of the Cornell University Portable Radar Interferometer (CUPRI), which detected coherent backscatter from 3-m irregularities in the auroral E-region are summarized. Twenty hours of power spectra and interferometry data are available, and, during the 1989 campaign, three weeks of nearly continuous Range-Time-Intensity (RTI) and first moment data were recorded.

  4. Child Indicators: Dental Health.

    ERIC Educational Resources Information Center

    Lewit, Eugene M.; Kerrebrock, Nancy

    1998-01-01

    Reviews measures of dental health in children and the evidence on child dental health. Although children's dental health has improved over the past two decades, many poor children do not receive necessary dental health services, and reasons for this failure are summarized. (SLD)

  5. Weaker dental enamel explains dental decay.

    PubMed

    Vieira, Alexandre R; Gibson, Carolyn W; Deeley, Kathleen; Xue, Hui; Li, Yong

    2015-01-01

    Dental caries continues to be the most prevalent bacteria-mediated non-contagious disease of humankind. Dental professionals assert the disease can be explained by poor oral hygiene and a diet rich in sugars but this does not account for caries free individuals exposed to the same risk factors. In order to test the hypothesis that amount of amelogenin during enamel development can influence caries susceptibility, we generated multiple strains of mice with varying levels of available amelogenin during dental development. Mechanical tests showed that dental enamel developed with less amelogenin is "weaker" while the dental enamel of animals over-expressing amelogenin appears to be more resistant to acid dissolution.

  6. Dental education in Colombia

    PubMed Central

    Jaramillo, Jorge A.; Pulido, Jairo H. Ternera; Núñez, Jaime A. Castro; Bird, William F.; Komabayashi, Takashi

    2014-01-01

    This article describes Colombia's development of formal dentistry, its dental school system, curriculum, and dental licensure, and current issues in oral health care. In 1969, there were only 4 dental schools in Colombia; at this writing there are 21. Five dental schools are public and the other 16 are private. Nearly all classes are conducted in Spanish. Undergraduate pre-dental coursework is not a prerequisite for dental school in Colombia. To obtain licensure, Colombian dental students must complete 5 years of study in dental school, earn a diploma, and work for the government for 1 year. There are approximately 41,400 dentists in Colombia, and the number is increasing quickly. However, the unemployment rate among dentists is very high, even though graduation from dental school is extremely difficult. Although the 1,100:1 ratio of citizens to dentists is considered satisfactory, access to dental care is limited due to the high rate of poverty. PMID:20339245

  7. Influence of social factors on sugary products behavior in 4-year-old children with regard to dental caries experience and information at child health centers.

    PubMed

    Kinnby, C G; Lanke, J; Lindén, A L; Widenheim, J; Granath, L

    1995-04-01

    The aim was to analyze the steering effects of 15 social factors on sugary products behavior at 4 years of age in 177 children. The parents had in most cases received information on dental health care at child health centers, with due respect to the level of caries among the children, who were classified as 'healthy' (no caries experience) (n = 83) or 'diseased' (caries experience) (n = 84). The parents filled in a mailed diet history form. Only sugary products unsuitable from a cariologic point of view were considered. The products were given scores reflecting the frequency of intake. The social factors were social background, family, information, and conceptual factors. By means of multiple regression analysis, explanatory values of the social variables for sugary products behavior were estimated. For the total material, 13% of the variance was explained by all variables combined. Among the social background factors, 'parents' age' was statistically significant (p < 0.05). Among family factors, 'day-care mainly at home' and 'oldest child' were the most important. All information factors proved to be nonsignificant. Of the conceptual factors, only 'importance of genetic factors' was statistically significant. For the healthy group 26% of the variance was explained by all variables. 'Mother's age', 'importance of genetic factors', and 'oldest child' were statistically significant. For the diseased group all variables were nonsignificant. Explanatory values were negligible. The important conclusions were that very few traditionally conceived social variables seem to influence 4-year-old children's sugar behavior. Parents of children with caries appear to be a heterogeneous group with an irrational behavior.

  8. Atypical Forensic Dental Identifications.

    PubMed

    Cardoza, Anthony R; Wood, James D

    2015-06-01

    Forensic dental identification specialists are typically the last conventional option for postmortem identification. Forensic dental identification is most often accomplished by comparing radiographs of the decedent's teeth with the dental radiographs obtained from the dentist of the suspected victim. Unfortunately, antemortem dental radiographs are not always available. When presented with this challenge, the authors of this article have been successful in completing identifications using means other than dental radiographic comparison.

  9. Dental impression materials.

    PubMed

    Perry, Rachel

    2013-01-01

    It is clear that many impression materials are available to the veterinary dentist. They each have different inherent properties, handling characteristics, and indications for use. A thorough understanding of these concepts is essential if the veterinarian and laboratory technician are to produce meaningful and accurate reproductions of oral structures. New products are constantly being introduced to the dental market, with fantastic claims for ease of use and reproduction of detail. The reader is urged to seek independent research findings when assessing such claims, and make decisions founded in the highest possible levels of evidence.

  10. 77 FR 4469 - Dental Conditions

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-01-30

    ... economy, a sector of the economy, productivity, competition, jobs, the environment, public health or... dental treatment by VA's Veterans Health Administration (VHA), apply only when VHA requests information... greater health risks when combined with poor dentition. The preamble language is reflective of 38 CFR...

  11. Investigation of contact allergy to dental materials by patch testing

    PubMed Central

    Rai, Reena; Dinakar, Devina; Kurian, Swetha S.; Bindoo, Y. A.

    2014-01-01

    Background: Dental products are widely used by patients and dental personnel alike and may cause problems for both. Dental materials could cause contact allergy with varying manifestations such as burning, pain, stomatitis, cheilitis, ulcers, lichenoid reactions localized to the oral mucosa in patients, and hand dermatitis in dental personnel. Patch testing with the dental series comprising commonly used materials can be used to detect contact allergies to dental materials. Aim: This study aimed to identify contact allergy among patients who have oral mucosal lesions after dental treatment and among dental personnel who came in contact with these materials. Materials and Methods: Twenty patients who had undergone dental procedures with symptoms of oral lichen planus, oral stomatitis, burning mouth, and recurrent aphthosis, were included in the study. Dental personnel with history of hand dermatitis were also included in the study. Patch testing was performed using Chemotechnique Dental Series and results interpreted as recommended by the International Contact Dermatitis Research Group (ICDRG). Results: Out of 13 patients who had undergone dental treatment/with oral symptoms, six patients with stomatitis, lichenoid lesions, and oral ulcers showed positive patch tests to a variety of dental materials, seven patients with ulcers had negative patch tests, seven dental personnel with hand dermatitis showed multiple allergies to various dental materials, and most had multiple positivities. Conclusion: The patch test is a useful, simple, noninvasive method to detect contact allergies among patients and among dental personnel dealing with these products. Long term studies are necessary to establish the relevance of these positive patch tests by eliminating the allergic substances, identifying clinical improvement, and substituting with nonallergenic materials. PMID:25165644

  12. Dose optimization by altering the operating potential and tube current exposure time product in dental cone beam CT: a systematic review

    PubMed Central

    Davies, Jonathan; Horner, Keith; Murphy, Frederick

    2016-01-01

    Objectives: Current guidelines highlight the need to optimize exposure parameters on CBCT equipment to levels that are as low as diagnostically acceptable. This systematic review aimed to answer the question “Can altering operating potential (kV) and tube current exposure time product (mAs) on CBCT machines reduce radiation dose to patients undergoing dental and/or maxillofacial scans without a detrimental impact on image quality/diagnostic accuracy?” Methods: Studies were selected and results reported following the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) method. For each individual study, two authors (RG and JD or KH) independently extracted data using a specifically designed collection form, and an overall quality value was assigned using the Grading of Recommendations Assessment, Development and Evaluation (GRADE) system. Any disagreements in the overall quality value of a study were resolved by discussion between the current authors. Results: Nearly 75% of studies were considered to be of low or very low methodological quality using the GRADE system, and more studies stated that their results applied only in the specific situations they had investigated. However, most studies demonstrated that patient dose reduction is possible without a clinically relevant reduction in image quality. Conclusions: For many CBCT machines, it should be possible to optimize one, or more, of the investigated exposure parameters and therefore reduce patient radiation dose, while maintaining diagnostic image quality for some diagnostic tasks. However, more rigorous research is still required. PMID:26732433

  13. Ceramics as biomaterials for dental restoration.

    PubMed

    Höland, Wolfram; Schweiger, Marcel; Watzke, Ronny; Peschke, Arnd; Kappert, Heinrich

    2008-11-01

    Sintered ceramics and glass-ceramics are widely used as biomaterials for dental restoration, especially as dental inlays, onlays, veneers, crowns or bridges. Biomaterials were developed either to veneer metal frameworks or to produce metal-free dental restorations. Different types of glass-ceramics and ceramics are available and necessary today to fulfill customers' needs (patients, dentists and dental technicians) regarding the properties of the biomaterials and the processing of the products. All of these different types of biomaterials already cover the entire range of indications of dental restorations. Today, patients are increasingly interested in metal-free restoration. Glass-ceramics are particularly suitable for fabricating inlays, crowns and small bridges, as these materials achieve very strong, esthetic results. High-strength ceramics are preferred in situations where the material is exposed to high masticatory forces.

  14. Balancing dental service requirements and supplies: the economic evidence.

    PubMed

    Furino, A; Douglass, C W

    1990-12-01

    A conceptual model of the market for dental services is described. The model is based on principles of demand and production theory and the applications of those principles to the dental industry. The model highlights the significance of relevant economic indicators which are discussed to create an awareness of and, when possible, explain the challenges awaiting dentistry in the decades to come. It is concluded that, while dental service expenditures per dentist are likely to increase, larger portions of the population may not be able to afford dental care if prices of dental services continue to increase faster than individual budgets.

  15. Dental Auxiliary Occupations. Interim Report.

    ERIC Educational Resources Information Center

    Kingston, Richard D.

    As part of a dental auxiliaries project, a Dental Auxiliary National Technical Advisory Committee was established, and its major undertaking was to assist in the development of a functional inventory for each of the three dental auxiliary occupations (dental assisting, dental hygiene, and dental laboratory technology). The analysis consisted of…

  16. Dental Exam for Children

    MedlinePlus

    ... and thumb sucking Toddlers, school-age children and adolescents During each regular checkup, the dentist or hygienist ... dental hygienist about proper oral health care for adolescents. American Dental Hygienists' Association. http://www.adha.org/ ...

  17. About Dental Amalgam Fillings

    MedlinePlus

    ... documents in the Related Resources section. Why is mercury used in dental amalgam? Approximately half of a ... about bioaccumulation, please see Related Resources. Is the mercury in dental amalgam the same as the mercury ...

  18. 75 FR 33169 - Dental Devices: Classification of Dental Amalgam, Reclassification of Dental Mercury, Designation...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-06-11

    ...-AG21 Dental Devices: Classification of Dental Amalgam, Reclassification of Dental Mercury, Designation of Special Controls for Dental Amalgam, Mercury, and Amalgam Alloy; Technical Amendment AGENCY: Food... classified dental amalgam as a class II device, reclassified dental mercury from class I to class II,...

  19. Accreditation in Dental Hygiene.

    ERIC Educational Resources Information Center

    National Commission on Accrediting, Washington, DC.

    The Council on Dental Education cooperates with the American Dental Hygienists' Association in developing educational requirements for schools of dental hygiene. To be eligible for accreditation, schools must operate on a non-profit basis. A school applying for accreditation completes a previsitation questionnaire concerning its program. The…

  20. Dental Manpower Fact Book.

    ERIC Educational Resources Information Center

    Ake, James N.; Johnson, Donald W.

    Statistical data on many aspects of dental and allied dental personnel supply, distribution, characteristics, and education and on certain other aspects of dental services are presented and discussed. The data on dentist supply show the national trend in the supply of active dentists since 1950 and the concurrent changes in dentist-to-population…

  1. Dental Laboratory Technology.

    ERIC Educational Resources Information Center

    Department of the Air Force, Washington, DC.

    The Air Force dental laboratory technology manual is designed as a basic training text as well as a reference source for dental laboratory technicians, a specialty occupation concerned with the design, fabrication, and repair of dental prostheses. Numerous instructive diagrams and photographs are included throughout the manual. The comprehensive…

  2. DENTAL SCHOOL PLANNING.

    ERIC Educational Resources Information Center

    GALAGAN, DONALD J.

    THIS DISCUSSION PRESENTS A COMPLETE PICTURE OF THE CURRENT STATE OF DENTAL EDUCATION WITH SUGGESTIONS FOR MEETING THE DEMANDS FOR DENTAL STAFF AND FACILITIES. THE AREAS INVESTIGATED ARE (1) OBJECTIVES IN DENTAL EDUCATION--COURSES, TEACHING MODES, INNOVATIONS IN CURRICULUM, COORDINATION OF BASIC AND CLINICAL INSTRUCTION, (2) FACILITY…

  3. Dental Assisting Laboratory Manual.

    ERIC Educational Resources Information Center

    Thiel, Sandra J.

    Compiled to introduce the dental assisting student to various techniques used in the dental office and to present theoretical information essential for the student's professional development, this laboratory guide consists of three units of instruction. The first unit is an introduction to dental assisting and contains five topics of study. The…

  4. Perspectives from Dental Research.

    ERIC Educational Resources Information Center

    Baum, Bruce J.

    1996-01-01

    This paper responds to the Institute of Medicine's 1995 report concerning the present status and future needs of dental education in the United States. It examines whether real reform is occurring at the National Institute of Dental Research, within the academic dental community, and within the practicing profession. It concludes that very little…

  5. Weaker Dental Enamel Explains Dental Decay

    PubMed Central

    Vieira, Alexandre R.; Gibson, Carolyn W.; Deeley, Kathleen; Xue, Hui; Li, Yong

    2015-01-01

    Dental caries continues to be the most prevalent bacteria-mediated non-contagious disease of humankind. Dental professionals assert the disease can be explained by poor oral hygiene and a diet rich in sugars but this does not account for caries free individuals exposed to the same risk factors. In order to test the hypothesis that amount of amelogenin during enamel development can influence caries susceptibility, we generated multiple strains of mice with varying levels of available amelogenin during dental development. Mechanical tests showed that dental enamel developed with less amelogenin is “weaker” while the dental enamel of animals over-expressing amelogenin appears to be more resistant to acid dissolution. PMID:25885796

  6. Fifty years of Brazilian Dental Materials Group: scientific contributions of dental materials field evaluated by systematic review

    PubMed Central

    ROSA, Wellington Luiz de Oliveira; SILVA, Tiago Machado; LIMA, Giana da Silveira; SILVA, Adriana Fernandes; PIVA, Evandro

    2016-01-01

    ABSTRACT Objective A systematic review was conducted to analyze Brazilian scientific and technological production related to the dental materials field over the past 50 years. Material and Methods This study followed the Preferred Reporting Items for Systematic Reviews and Meta-Analysis (Prisma) statement. Searches were performed until December 2014 in six databases: MedLine (PubMed), Scopus, LILACS, IBECS, BBO, and the Cochrane Library. Additionally, the Brazilian patent database (INPI - Instituto Nacional de Propriedade Industrial) was screened in order to get an overview of Brazilian technological development in the dental materials field. Two reviewers independently analyzed the documents. Only studies and patents related to dental materials were included in this review. Data regarding the material category, dental specialty, number of documents and patents, filiation countries, and the number of citations were tabulated and analyzed in Microsoft Office Excel (Microsoft Corporation, Redmond, Washington, United States). Results A total of 115,806 studies and 53 patents were related to dental materials and were included in this review. Brazil had 8% affiliation in studies related to dental materials, and the majority of the papers published were related to dental implants (1,137 papers), synthetic resins (681 papers), dental cements (440 papers), dental alloys (392 papers) and dental adhesives (361 papers). The Brazilian technological development with patented dental materials was smaller than the scientific production. The most patented type of material was dental alloys (11 patents), followed by dental implants (8 patents) and composite resins (7 patents). Conclusions Dental materials science has had a substantial number of records, demonstrating an important presence in scientific and technological development of dentistry. In addition, it is important to approximate the relationship between academia and industry to expand the technological development in

  7. Effects of occupational regulations on the cost of dental services: evidence from dental insurance claims.

    PubMed

    Wing, Coady; Marier, Allison

    2014-03-01

    In the United States, occupational regulations influence the work tasks that may legally be performed by dentists and dental hygienists. Only a dentist may legally perform most dental procedures; however, a smaller list of basic procedures may be provided by either a dentist or a dental hygienist. Since dentists and hygienists possess different levels of training and skill and receive very different wages, it is plausible that these regulations could distort the optimal allocation of skills to work tasks. We present simple theoretical framework that shows different ways that such regulations might affect the way that dentists and dental hygienists are used in the production of dental services. We then use a large database of dental insurance claims to study the effects of the regulations on the prevailing prices of a set of basic dental services. Our empirical analysis exploits variation across states and over time in the list of services that may be provided by either type of worker. Our main results suggest that the task-specific occupational regulations increase prices by about 12%. We also examine the effects of related occupational regulations on the utilization of basic dental services. We find that allowing insurers to directly reimburse hygienists for their work increases one year utilization rates by 3-4 percentage points.

  8. Pipelines or Pipe Dreams? PhD Production and Other Matters in a South African Dental Research Institute 1954-2006

    ERIC Educational Resources Information Center

    Grossman, Elly S.; Cleaton-Jones, Peter E.

    2011-01-01

    This retrospective study documents the Masters and PhD training of 131 Dental Research Institute (DRI) postgraduates (1954-2006) to establish demographics, throughput and research outcomes for future PhD pipeline strategies using the DRI database. Descriptive statistics show four degree-based groups of postgraduates: 18 PhDs; 55 MScs; 42 MDents…

  9. What is dental ecology?

    PubMed

    Cuozzo, Frank P; Sauther, Michelle L

    2012-06-01

    Teeth have long been used as indicators of primate ecology. Early work focused on the links between dental morphology, diet, and behavior, with more recent years emphasizing dental wear, microstructure, development, and biogeochemistry, to understand primate ecology. Our study of Lemur catta at the Beza Mahafaly Special Reserve, Madagascar, has revealed an unusual pattern of severe tooth wear and frequent tooth loss, primarily the result of consuming a fallback food for which these primates are not dentally adapted. Interpreting these data was only possible by combining our areas of expertise (dental anatomy [FC] and primate ecology [MS]). By integrating theoretical, methodological, and applied aspects of both areas of research, we adopted the term "dental ecology"-defined as the broad study of how teeth respond to the environment. Specifically, we view dental ecology as an interpretive framework using teeth as a vehicle for understanding an organism's ecology, which builds upon earlier work, but creates a new synthesis of anatomy and ecology that is only possible with detailed knowledge of living primates. This framework includes (1) identifying patterns of dental pathology and tooth use-wear, within the context of feeding ecology, behavior, habitat variation, and anthropogenic change, (2) assessing ways in which dental development and biogeochemical signals can reflect habitat, environmental change and/or stress, and (3) how dental microstructure and macro-morphology are adapted to, and reflect feeding ecology. Here we define dental ecology, provide a short summary of the development of this perspective, and place our new work into this context.

  10. Dental hygiene in Slovakia.

    PubMed

    Luciak-Donsberger, C; Krizanová, M

    2004-08-01

    This article reports on the development of the dental hygiene profession in Slovakia from a global perspective. The aim is to inform about current developments and to examine, how access to qualified dental hygiene care might be improved and how professional challenges might be met. For an international study on dental hygiene, secondary source data were obtained from members of the House of Delegates of the International Federation of Dental Hygienists (IFDH) or by fax and e-mail from experts involved in the national professional and educational organization of dental hygiene in non-IFDH member countries, such as Slovakia. Responses were followed-up by interviews, e-mail correspondence, visits to international universities, and a review of supporting studies and reference literature. Results show that the introduction of dental hygiene in Slovakia in 1992 was inspired by the delivery of preventive care in Switzerland. Initiating local dentists and dental hygienists strive to attain a high educational level, equitable to that of countries in which dental hygiene has an established tradition of high quality care. Low access to qualified dental hygiene care may be a result of insufficient funding for preventive services, social and cultural lack of awareness of the benefits of preventive care, and of limitations inherent in the legal constraints preventing unsupervised dental hygiene practice. These may be a result of gender politics affecting a female-dominated profession and of a perception that dental hygiene is auxiliary to dental care. International comparison show that of all Eastern European countries, the dental hygiene profession appears most advanced in Slovakia. This is expressed in high evidence-based academic goals, in extensive work with international consultants from the Netherlands and Switzerland, in annual congresses of high professional quality, and in the establishment of a profession, which has not been introduced in all Western EU countries.

  11. Employment of Dental Hygienists as Dental Educators.

    ERIC Educational Resources Information Center

    Fong, Cynthia; Odrich, Johanna

    1987-01-01

    A study of the use of dental hygienists to teach periodontics, preventive dentistry, community dentistry, and public health courses looked at employment patterns and practices and the qualifications of the teachers. (MSE)

  12. Pathways in dental public health.

    PubMed

    Silverstein, Steven J

    2005-07-01

    Dental public health is one of the nine specialties of dentistry recognized by the American Dental Association Commission on Dental Accreditation. Dental public health has been defined as the "science and art of preventing and controlling dental diseases and promoting dental health through organized community efforts. It is that form of dental practice which serves the community as a patient rather than as an individual. It is concerned with the dental health education of the public, with applied dental research, and with the administration of group dental care programs as well as the prevention and control of dental diseases on a community basis." This article will describe the many career and educational pathways dentists may follow to become irvolved in the practice of dental public health.

  13. Dental radiology for children

    SciTech Connect

    Myers, D.R.

    1984-01-01

    The benefit for the child from the judicious use of diagnostic dental radiography is improved dental health. The risk to the child from dental diagnostic radiation exposure appears to be extremely low. Despite the low risk, the dentist must minimize the child's exposure to ionizing radiation by using sound clinical judgment to determine what radiographs are necessary and to provide children with optimal protection from ionizing radiation.

  14. Dental erosion, summary.

    PubMed

    ten Cate, J M; Imfeld, T

    1996-04-01

    Although reports on dental erosion have always appeared in the dental literature, there is currently a growing interest among researchers and clinicians. Potential risk factors for dental erosion are changed lifestyle and eating patterns, with increased consumption of acidic foods and beverages. Various gastrointestinal and eating disorders expose the dentition to frequent contacts with very acidic gastric content, which may lead to erosion. Whether these factors indeed lead, on a population scale, to a higher prevalence and incidence of erosion is yet to be established. This article summarizes the different aspects of the prevalence, pathology, etiology, assessment, prevention and treatment of dental erosion, and concludes with recommendations for future research.

  15. Dental Implant Systems

    PubMed Central

    Oshida, Yoshiki; Tuna, Elif B.; Aktören, Oya; Gençay, Koray

    2010-01-01

    Among various dental materials and their successful applications, a dental implant is a good example of the integrated system of science and technology involved in multiple disciplines including surface chemistry and physics, biomechanics, from macro-scale to nano-scale manufacturing technologies and surface engineering. As many other dental materials and devices, there are crucial requirements taken upon on dental implants systems, since surface of dental implants is directly in contact with vital hard/soft tissue and is subjected to chemical as well as mechanical bio-environments. Such requirements should, at least, include biological compatibility, mechanical compatibility, and morphological compatibility to surrounding vital tissues. In this review, based on carefully selected about 500 published articles, these requirements plus MRI compatibility are firstly reviewed, followed by surface texturing methods in details. Normally dental implants are placed to lost tooth/teeth location(s) in adult patients whose skeleton and bony growth have already completed. However, there are some controversial issues for placing dental implants in growing patients. This point has been, in most of dental articles, overlooked. This review, therefore, throws a deliberate sight on this point. Concluding this review, we are proposing a novel implant system that integrates materials science and up-dated surface technology to improve dental implant systems exhibiting bio- and mechano-functionalities. PMID:20480036

  16. Improved drug delivery systems for preventing dental caries.

    PubMed

    Hiorth, Marianne

    2016-10-13

    Dental caries: Dental caries and periodontitis were for many decades considered the most important global oral health burden. During the last 40 years when more focus was put on the prevention of dental caries by using products with fluoride, the problem decreased. However, our new lifestyle with more sugar has given rise to concern, and in US the amount of children being diagnosed with dental caries has increased [1]. In addition the increasing amount of elderly in the population using many different types of medicines giving dry mouth has a negative impact of the status of their teeth [2].

  17. The refurbished 1.3-m Robotically Controlled Telescope at Kitt Peak

    NASA Astrophysics Data System (ADS)

    Gelderman, R.; Guinan, E.; Howell, S.; Mattox, J. R.; McGruder, C. H.; Walter, D. K.; Davis, D. R.; Everett, M.

    2003-05-01

    In 1999, the National Optical Astronomy Observatories (NOAO) announced the opportunity to "assume responsibility for operation of the Kitt Peak 1.3-m telescope." A group of astronomers/educators from institutions across the USA successfully proposed to refurbish and automate the observatory and operate it as the Robotically Controlled Telescope (RCT). The RCT Consortium has been established between Francis Marion University, the Planetary Science Institute, South Carolina State University, Villanova University, and Western Kentucky University to oversee the refurbishment and automation, and operate the telescope to successfully achieve its research and education goals. The RCT was commissioned in 1964 as the Remotely Controlled Telescope and utilized that epoch's computing and communication technology to provide unattended operation from NOAO headquarters in Tucson, about 90 km distant. The original incarnation of the RCT allowed astronomers to gain experience in the remote operation of observatories in order to both develop techniques for operating space-based telescopes and to increase the productivity of ground-based telescopes (Maran 1967 Science 158, 867). While these tests worked as well as could be expected given the technology of the time, the telescope and observatory were refitted in 1969 for classical, attended operations. The second life of the 1.3-m was as a heavily subscribed KPNO visitor facility, first with photoelectric photometers and later as an important testbed for the newest infrared instrumentation. In 1996 the telescope was removed from the list of available KPNO facilities and stood idle until the RCT Consortium hired EOS Technologies, Inc. to refurbish and automate the observatory. In winter 2003 most of the observatory systems have been refurbished and the commissioning has begun. Refurbishment of the RCT has been made possible by NASA grant NAG58762.

  18. Education About Dental Hygienists' Roles in Public Dental Prevention Programs: Dental and Dental Hygiene Students' and Faculty Members' and Dental Hygienists' Perspectives.

    PubMed

    Pervez, Anushey; Kinney, Janet S; Gwozdek, Anne; Farrell, Christine M; Inglehart, Marita R

    2016-09-01

    In 2005, Public Act No. 161 (PA 161) was passed in Michigan, allowing dental hygienists to practice in approved public dental prevention programs to provide services for underserved populations while utilizing a collaborative agreement with a supervising dentist. The aims of this study were to assess how well dental and dental hygiene students and faculty members and practicing dental hygienists have been educated about PA 161, what attitudes and knowledge about the act they have, and how interested they are in additional education about it. University of Michigan dental and dental hygiene students and faculty members, students in other Michigan dental hygiene programs, and dental hygienists in the state were surveyed. Respondents (response rate) were 160 dental students (50%), 63 dental hygiene students (82%), 30 dental faculty members (26%), and 12 dental hygiene faculty members (52%) at the University of Michigan; 143 dental hygiene students in other programs (20%); and 95 members of the Michigan Dental Hygienists' Association (10%). The results showed that the dental students were less educated about PA 161 than the dental hygiene students, and the dental faculty members were less informed than the dental hygiene faculty members and dental hygienists. Responding dental hygiene faculty members and dental hygienists had more positive attitudes about PA 161 than did the students and dental faculty members. Most of the dental hygiene faculty members and dental hygienists knew a person providing services in a PA 161 program. Most dental hygiene students, faculty members, and dental hygienists wanted more education about PA 161. Overall, the better educated about the program the respondents were, the more positive their attitudes, and the more interested they were in learning more.

  19. The Effect of Thermal Cycling on the Surface Roughness of Dental Casting Investments.

    DTIC Science & Technology

    1991-05-01

    ceramometal alloys, cast into the various dental investment samples, was also evaluated. Finally, the roughness average measurement method was evaluated for...adaptability to dental casting investments. Ten epoxy resin dies were fabricated from the surface of six dental investment products after they were set...against a smooth reference surface. Ten additional epoxy resin dies were fabricated from the six dental investment samples after they were set

  20. Dental Laboratory Technician.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Center on Education and Training for Employment.

    This document, which is designed for use in developing a tech prep competency profile for the occupation of dental laboratory technician, lists technical competencies and competency builders for 13 units pertinent to the health technologies cluster in general and 8 units to the occupation of dental laboratory technician. The following skill areas…

  1. Dental Assisting Program Guide.

    ERIC Educational Resources Information Center

    Georgia Univ., Athens. Dept. of Vocational Education.

    This program guide contains the standard dental assisting curriculum for technical institutes in Georgia. The curriculum encompasses the minimum competencies required for entry-level dental assistants, and includes job skills in the technical areas of preventive dentistry; four-handed dentistry; chairside assisting with emphasis in diagnostics,…

  2. Clinical feline dental radiography.

    PubMed

    Lemmons, Matthew

    2013-05-01

    Dental radiography is a necessary diagnostic modality in small animal practice. It is not possible to accurately assess and diagnose tooth resorption, periodontal disease, endodontic disease, neoplasia and injury without it. Dental radiography is also necessary for treatment and assessment of the patient postoperatively.

  3. Dental Charting. Student's Manual.

    ERIC Educational Resources Information Center

    Weaver, Trudy Karlene; Apfel, Maura

    This manual is part of a series dealing with skills and information needed by students in dental assisting. The individualized student materials are suitable for classroom, laboratory, or cooperative training programs. This student manual contains four units covering the following topics: dental anatomical terminology; tooth numbering systems;…

  4. Workbook for Dental Records.

    ERIC Educational Resources Information Center

    Carpenter, Corinne K.; Volpe, Margaret E.

    This workbook contains l8 units of instruction for dental assistant students, each designed to give students practical experience in completing forms that simulate realistic situations in a dental office. Units are: (1) The Appointment Record, (2) The Recall System, (3) Clinical Records, (4) Estimates, (5) Daily Record Sheet, (6) Patient's…

  5. Dental Fear Among University Employees: Implications for Dental Education.

    ERIC Educational Resources Information Center

    Kaakko, Tarja; Milgrom, Peter; Coldwell, Susan E.; Getz, Tracy; Weinstein, Philip; Ramsay, Douglas S.

    1998-01-01

    A survey of 270 University of Washington permanent employees who were potential candidates for teaching clinics, found dental anxiety prevalent, correlating with poorer perceived dental health, longer intervals between dental appointments, higher frequency of past fear behaviors, more physical symptoms during last dental injection, and more…

  6. [Conditions of dental extractions in areas health centers of Senegal].

    PubMed

    Faye, D; Tine, S D; Cisse, D; Lo, C M; Mbodj, El B; Diouf, M; Diallo, P D

    2009-12-01

    Dental extraction is a surgical act frequently carried out in the African dental structures. It requires the rigorous respect of the conditions of asepsis and antisepsis. Equipments and anaesthetic and avulsional products must be also sufficient. Our study undertaken among 46 dental services in areas health centers of Senegal aimed to determine the conditions under which dental extractions are carried out. The principle results of our study showed that 93% of dental practitioners wore sterilized gloves. 49% of the dentist's care activity consisted in dental extractions. 50% of the practitioners re-use anaesthetic needles, 2% re-use anaesthetic carpules. We noticed that the dental structures were facing a deficit of materials and products of extraction. Face to the outbreak of serious illnesses as infections of HIV and Hepatitis B, the practitioner and his team must be sensitized and trained to struggle against the transmissible infections and to carry out the dental extraction only if the conditions of asepsis and antisepsis are joined together. A pleading towards the medical authorities must be done to support the services in equipments and periodic renewals of the materials and products of extractions.

  7. Health Instruction Packages: Permanent Teeth, Dental Deposits, and Dental Instruments. Dientes Permanentes, Depositos Dentales y Instrumentos Dentales.

    ERIC Educational Resources Information Center

    Lind, Patricia; Germano, Catherine

    These five learning modules use text interspersed with illustrations and reinforcement exercises to instruct dental aide and dental hygiene students about jaw bones and gums, dental deposits, and dental instruments. The first four modules were prepared by Patricia Lind in both Spanish and English. "The Gum and Bone of Permanent Teeth"…

  8. Determinants of Catastrophic Dental Health Expenditure in China

    PubMed Central

    Liu, Xuenan; Gallagher, Jennifer Elizabeth; Zheng, Shuguo

    2016-01-01

    This study explored catastrophic health expenditure in China, due to out-of-pocket payments for dental care, and its associated individual- and contextual-level factors. We pooled data from 31,566 adults who participated in the third National Oral Health Survey with province-level data from different sources. We defined catastrophic dental health expenditure (CDHE) as payments for dental services and/or medication for dental problems during the last year that exceeded the 10% and 20% of the household income. The association of individual and contextual factors with catastrophic dental health expenditure was evaluated using two-level logistic regression models with individuals nested within provinces. Socioeconomic position (education and household income), household size and dental status (pain in teeth or mouth and number of teeth) were the individual-level factors associated with CDHE among the full sample of participants; and, also, among those who used dental services in the past year. Greater gross domestic product per capita was the only contextual factor associated with CDHE, and only at the lower income threshold. This study shows that out-of-pocket expenses for dental services may put a considerable, and unnecessary, burden on households’ finances. Our findings also help characterise those households more likely to face catastrophic expenditure on health if they have to pay for dental services. PMID:27977756

  9. Determinants of Catastrophic Dental Health Expenditure in China.

    PubMed

    Sun, Xiangyu; Bernabé, Eduardo; Liu, Xuenan; Gallagher, Jennifer Elizabeth; Zheng, Shuguo

    2016-01-01

    This study explored catastrophic health expenditure in China, due to out-of-pocket payments for dental care, and its associated individual- and contextual-level factors. We pooled data from 31,566 adults who participated in the third National Oral Health Survey with province-level data from different sources. We defined catastrophic dental health expenditure (CDHE) as payments for dental services and/or medication for dental problems during the last year that exceeded the 10% and 20% of the household income. The association of individual and contextual factors with catastrophic dental health expenditure was evaluated using two-level logistic regression models with individuals nested within provinces. Socioeconomic position (education and household income), household size and dental status (pain in teeth or mouth and number of teeth) were the individual-level factors associated with CDHE among the full sample of participants; and, also, among those who used dental services in the past year. Greater gross domestic product per capita was the only contextual factor associated with CDHE, and only at the lower income threshold. This study shows that out-of-pocket expenses for dental services may put a considerable, and unnecessary, burden on households' finances. Our findings also help characterise those households more likely to face catastrophic expenditure on health if they have to pay for dental services.

  10. Translucency measurements in teeth and dental materials

    NASA Astrophysics Data System (ADS)

    Rawicz, Andrew H.; Melnyk, Ivan; Kowalski, Pawel

    2003-06-01

    Exact color matching of dental restorative materials to vital teeth is a difficult task. There are several reasons for this difficulty and they will be elaborated upon in the presentation. One of the most important reasons is the fact that teeth, as well as dental restorative materials are translucent, and thus the color impression is a product of light scattering, back scattering, transmission, and spectral modifications inside of these objects. Classic colorimetry is insufficient to provide an exact color match. Additional information about the translucency factor of the considered object (material and geometry) is necessary to provide full reproducibility. Translucency has a direct effect on perceived brightness. In this article we describe the TransluDent, a complementary product to ColorDent, which measures translucency of teeth and dental materials. TransluDent determines translucency by measuring light transmitted through an object and light scattered inside of the object. The translucency measurements were performed on two groups of subjects. One group consisted of people in their twenties and the second group of subjects was in fifties. For comparison several sets of dental shade-guides were also tested. The great discrepancy in translucency factor between human teeth and popular on the market shades may explain difficulty in color matching of dental restorative materials to teeth.

  11. 3M's Model Rewards and Recognition Program Engages Employees and Drives Energy Savings Efforts

    SciTech Connect

    2010-06-11

    3M has implemented more than 1,900 employee-inspired projects that have realized a 22% improvement in energy efficiency and yielded $100 million in energy savings. This case study provides information about 3M's approach to energy efficiency.

  12. Optimizing Electric Motor Systems at a Corporate Campus Facility (3M)

    SciTech Connect

    2002-05-01

    3M conducted an in-house motor system study in 29 buildings at the 3M Center. The company evaluated approximately 1,000 electric motors and upgraded systems, resulting in reduced electricity use and cost savings of $77,554 per year.

  13. Phospholipase C-independent effects of 3M3FBS in murine colon

    PubMed Central

    Dwyer, Laura; Kim, Hyunjin; Koh, Byoung Ho; Koh, Sang Don

    2009-01-01

    The muscarinic receptor subtype M3 is coupled to Gq/11 proteins. Muscarinic receptor agonists such as carbachol stimulate these receptors that result in activation of phospholipase C (PLC) which hydrolyzes phosphatidylinositol 4,5-bisphosphate into diacylglycerol and Ins(1,4,5)P3. This pathway leads to excitation and smooth muscle contraction. In this study the PLC agonist, 2, 4, 6-trimethyl-N-(meta-3-trifluoromethyl-phenyl)-benezenesulfonamide (m-3M3FBS), was used to investigate whether direct PLC activation mimics carbachol-induced excitation. We examined the effects of m-3M3FBS and 2, 4, 6-trimethyl-N-(ortho-3-trifluoromethyl-phenyl)-benzenesulfonamide (o-3M3FBS), on murine colonic smooth muscle tissue and cells by performing conventional microelectrode recordings, isometric force measurements and patch clamp experiments. Application of m-3M3FBS decreased spontaneous contractility in murine colonic smooth muscle without affecting the resting membrane potential. Patch clamp studies revealed that delayed rectifier K+ channels were reversibly inhibited by m-3M3FBS and o-3M3FBS. The PLC inhibitor, 1-(6-((17b-3-methoxyestra-1,3,5(10)-trien-17-yl)amino)hexyl)-1H-pyrrole-2,5-dione (U73122), did not prevent this inhibition by m-3M3FBS. Both m-3M3FBS and o-3M3FBS decreased two components of delayed rectifier K+ currents in the presence of tetraethylammonium chloride or 4-aminopyridine. Ca2+ currents were significantly suppressed by m-3M3FBS and o-3M3FBS with a simultaneous increase in intracellular Ca2+. Pretreatment with U73122 did not prevent the decrease in Ca2+ currents upon m-3M3FBS application. In conclusion, both m-3M3FBS and o-3M3FBS inhibit inward and outward currents via mechanisms independent of PLC acting in an antagonistic manner. In contrast, both compounds also caused an increase in [Ca2+]i in an agonistic manner. Therefore caution must be employed when interpreting their effects at the tissue and cellular level. PMID:19931239

  14. Phospholipase C-independent effects of 3M3FBS in murine colon.

    PubMed

    Dwyer, Laura; Kim, Hyun Jin; Koh, Byoung Ho; Koh, Sang Don

    2010-02-25

    The muscarinic receptor subtype M(3) is coupled to Gq/11 proteins. Muscarinic receptor agonists such as carbachol stimulate these receptors that result in activation of phospholipase C (PLC) which hydrolyzes phosphatidylinositol 4,5-bisphosphate into diacylglycerol and Ins(1,4,5)P(3). This pathway leads to excitation and smooth muscle contraction. In this study the PLC agonist, 2, 4, 6-trimethyl-N-(meta-3-trifluoromethyl-phenyl)-benezenesulfonamide (m-3M3FBS), was used to investigate whether direct PLC activation mimics carbachol-induced excitation. We examined the effects of m-3M3FBS and 2, 4, 6-trimethyl-N-(ortho-3-trifluoromethyl-phenyl)-benzenesulfonamide (o-3M3FBS), on murine colonic smooth muscle tissue and cells by performing conventional microelectrode recordings, isometric force measurements and patch clamp experiments. Application of m-3M3FBS decreased spontaneous contractility in murine colonic smooth muscle without affecting the resting membrane potential. Patch clamp studies revealed that delayed rectifier K(+) channels were reversibly inhibited by m-3M3FBS and o-3M3FBS. The PLC inhibitor, 1-(6-((17b-3-methoxyestra-1,3,5(10)-trien-17-yl)amino)hexyl)-1H-pyrrole-2,5-dione (U73122), did not prevent this inhibition by m-3M3FBS. Both m-3M3FBS and o-3M3FBS decreased two components of delayed rectifier K(+) currents in the presence of tetraethylammonium chloride or 4-aminopyridine. Ca(2+) currents were significantly suppressed by m-3M3FBS and o-3M3FBS with a simultaneous increase in intracellular Ca(2+). Pretreatment with U73122 did not prevent the decrease in Ca(2+) currents upon m-3M3FBS application. In conclusion, both m-3M3FBS and o-3M3FBS inhibit inward and outward currents via mechanisms independent of PLC acting in an antagonistic manner. In contrast, both compounds also caused an increase in [Ca(2+)](i) in an agonistic manner. Therefore caution must be employed when interpreting their effects at the tissue and cellular level.

  15. Comparative analysis of dental enamel polyvinylsiloxane impression and polyurethane casting methods for SEM research.

    PubMed

    Galbany, Jordi; Estebaranz, Ferran; Martínez, Laura M; Romero, Alejandro; De Juan, Joaquín; Turbón, Daniel; Pérez-Pérez, Alejandro

    2006-04-01

    Dental casting is a very common procedure for making high-quality replicas of paleo-anthropological remains. Replicas are frequently used, instead of original remains, to study both fossil and extant Primate teeth in morphological and metrical analyses. Several commercial products can be used in molds. This study analyzed SEM image resolution and enamel surface feature definition of tooth molds at various magnification levels and obtained, with both Coltène and 3M low-viscosity body polyvinylsiloxane impression, materials and polyurethane casts. Results, through comparison with the original teeth, show that both the negative molds and the positive casts are highly reliable in replicating enamel surfaces. However, positive cast quality is optimal for SEM observation only till the fourth consecutive replica from the original mold, especially at high SEM magnification levels.

  16. The supply of dental manpower in the United States.

    PubMed

    Douglass, C W; Cole, K O

    1979-05-01

    This description of the supply of dental services in the United States addresses the number, kind, distribution, and training of dentists and dental auxiliaries, and the organizational factors that affect the production of dental services. Beginning with a brief historical review, the paper gives a general overview of the different types of dental personnel including the dentist, dental hygienist, dental assistant, and laboratory technician. The discussion of these categories of providers includes consideration of manpower planning as it has evolved over the past two decades, National manpower legislation is mentioned first as a reaction to the projected dentist shortage and then in response to the issues of geographic maldistribution and the effects of specialization. The second section of the paper discusses the dynamics of the dental care market. The distribution of the supply of services is identified and related to patterns of utilization and productivity. These factors are considered to be part of the set of dynamic relationships that help explain the current manpower problems of geographic and specialty maldistribution. A concluding section superficially discusses policy implications regarding the potential for increasing supply by: (1) increasing the number of dentists, (2) increasing the numbers and functions of auxiliaries, (3) increasing practice efficiency through group practice, and (4) reducing the restrictions that result from current state dental practice acts.

  17. Dental Compressed Air Systems.

    DTIC Science & Technology

    1992-03-01

    I AL-TR-IWI-0uuu AD-A249 954 DENTAL COMPRESSED AIMYTM R Curtis D. Weyrmuch, Mejor, USAP, D Samuel P.Dvs iueatclpi SF.O N AEROSPACE MwaEDIN mwr~ComA G...FUNDING NUMBERS Dental Compressed Air Systems PE - 87714F PR - 7350 TA - 22 D. Weyrauch WU - XX Samuel P. Davis George W. Gaines 7. PERFORMING...words) The purpose of this report is to update guidelines on dental compressed air systems (DCA). Much of the information was obtained from a survey

  18. Standing equine dental surgery.

    PubMed

    Menzies, Robert A; Easley, Jack

    2014-04-01

    Dental surgeries refer to procedures that affect the dental tissues or their supporting structures. With the development of specific, efficacious, and conservative treatments, morbidity risks have been lowered and chances of benefiting the health of equids improved. Advances in quality of sedation, analgesia, and locoregional anesthesia allow a majority of dental surgeries to be performed in the standing patient. This update focuses on an orthograde endodontic technique, a minimally invasive buccotomy technique, with the potential to combine it with a transbuccal screw extraction technique, and revisits the AO pinless external fixator for fractures of the body of the mandible.

  19. Feline dental disease.

    PubMed

    Frost, P; Williams, C A

    1986-09-01

    Periodontal disease and chronic gingivitis/stomatitis are the most common feline dental diseases. With routine dental care and increased emphasis on home oral hygiene, these diseases can be controlled. Cats can be seen with a number of other dental disorders, and improved treatment methods such as restorations of early subgingival resorptive lesions, endodontic therapy, and orthodontic therapy can be performed successfully. More study and research are necessary about the gingivitis/stomatitis syndrome and subgingival resorptive lesions so that improved prevention and treatment recommendations can be made.

  20. Characteristics of ICR-produced peripheral plasma in the Uragan-3M torsatron

    NASA Astrophysics Data System (ADS)

    Besedin, N. T.; Chechkin, V. V.; Fomin, I. P.

    Some plasma parameters outside the confinement volume near the last closed magnetic surface (LCMS) and in the divertor fluxes were studied by probe and microwave techniques during ICR production and heating of the plasma in the Uragan-3M torsatron. When moving around the LCMS, the steepness of the radial density, electron temperature, and potential profiles increase with distance away from the 'rib' of the LCMS. The quasi-steady radial electric field E(sub r) near the LCMS exceeds 100 V/cm and is directed outwards, opposite to the calculated ambipolar electric field inside the confinement volume. It is shown that the total flow of the diverted plasma in the spacing between two helical windings consists of a weakly mobile non-resonant component which is presumably formed at the periphery due to ionization, and a component whose value and poloidal location are sensitive to resonance conditions for RF power absorption, this flow being apparently formed by a plasma diffusing through the LCMS and/or generated near the LCMS, where the filed E(sub r) is localized. Based on plasma parameters measurements after the RF pulse is switched off, a qualitative model of peripheral plasma dynamics after the end of the RF heating is constructed.

  1. Insurance planning for dentists and dental practices.

    PubMed

    Thomalla, Kenneth C; Wherry, Jeffrey

    2008-07-01

    There are a myriad of insurance products available for the dentist and his dental practice. Care must be taken to ensure that all risks have been reviewed and the appropriate risks covered with an insurance plan. Taking the time to solidify your base helps to ensure a strong financial plan for years to come.

  2. Position Paper: Dental General Practice Residency Programs: Financing and Operations.

    ERIC Educational Resources Information Center

    Hanson, Paul W.

    1983-01-01

    A discussion of changeable economic issues that can affect dental general practice residency program planning includes costs and resource allocation, maximizing efficiency and productivity, ambulatory and inpatient revenue sources, management functions, faculty as practitioners, faculty appointments, and marketing. (MSE)

  3. Economic impact of dental hygienists on solo dental practices.

    PubMed

    Lazar, Vickie F; Guay, Albert H; Beazoglou, Tryfon J

    2012-08-01

    The fact that a significant percentage of dentists employ dental hygienists raises an important question: Are dental practices that utilize a dental hygienist structurally and operationally different from practices that do not? This article explores differences among dental practices that operate with and without dental hygienists. Using data from the American Dental Association's 2003 Survey of Dental Practice, a random sample survey of U.S. dentists, descriptive statistics were used to compare selected characteristics of solo general practitioners with and without dental hygienists. Multivariate regression analysis was used to estimate the effect of dental hygienists on the gross billings and net incomes of solo general practitioners. Differences in practice characteristics--such as hours spent in the practice and hours spent treating patients, wait time for a recall visit, number of operatories, square feet of office space, net income, and gross billings--were found between solo general practitioners who had dental hygienists and those who did not. Solo general practitioners with dental hygienists had higher gross billings. Higher gross billings would be expected, as would higher expenses. However, net incomes of those with dental hygienists were also higher. In contrast, the mean waiting time for a recall visit was higher among dentists who employed dental hygienists. Depending on personal preferences, availability of qualified personnel, etc., dentists who do not employ dental hygienists but have been contemplating that path may want to further research the benefits and opportunities that may be realized.

  4. Choice of a dental implant system.

    PubMed

    Hunt, Peter R; Gartner, Judith L; Norkin, Frederic J

    2005-04-01

    Many dentists are bewildered by the intricacies and complexities of dental implants. They are constantly besieged by product advertisements and can find it difficult to choose which systems to work with. Some dentists are so intimidated by the subject that they choose to avoid getting involved with implants and instead stick to traditional tooth replacement systems. By breaking implants down into 4 main components, the body, collar, connection, and restorative post, it is easier to understand the structure and function of dental implants. Each portion should be designed to achieve certain objectives. Once these structural components are understood, it is easier to compare and contrast differing implant systems.

  5. Chronic Cutaneous Draining Sinus of Dental Origin

    PubMed Central

    Sisodia, N; Manjunath, MK

    2014-01-01

    Extra oral sinus of odontogenic origin occurs when the purulent by-products of dental pulp necrosis spread along the path of least resistance from the root apex to the skin on the face. Patients presenting with cutaneous sinus usually visit a general physician or dermatologist first, as the lesion can mimic various dermatologic pathologies, ranging from an infected sebaceous cysts to a basal cell carcinoma. Despite systemic antibiotics, symptoms often persist causing further confusion, and at times leading to unnecessary surgical interventions. The location of this sinus in the head and neck region should lead the physician to seek a dental opinion in order to avoid misdiagnosis. PMID:25506495

  6. Glossary of Dental Terms

    MedlinePlus

    ... of entire communities, and can design and administer large-scale prevention and dental care programs by compiling and analyzing statistics Radiosurgery surgery technique that uses radio waves to produce a pressureless, ...

  7. Interpretation of dental radiographs.

    PubMed

    Woodward, Tony M

    2009-02-01

    Interpretation of dental radiographs is fairly straightforward, with a handful of common patterns making up the majority of pathology. This article covers normal radiographic anatomy, endodontic disease, periodontal disease, neoplastic changes, tooth resorption, caries, and radiographic signs of oral trauma.

  8. Dental Care in Scleroderma

    MedlinePlus

    ... a side effect • Avoid the spiral of depression – depression causes worse oral health and poor oral health worsens depression. Suggestions for your dental appointments: • Tell the dentist ...

  9. American Dental Education Association

    MedlinePlus

    ... ADEA Application Services ADEA AADSAS® ADEA CAAPID® ADEA PASS® ADEA DHCAS® Career Resources DentEd Jobs Placing Ads ... Students & Residents Prospective Students Application Services AADSAS CAAPID PASS DHCAS ADEA AADSAS Applicants Prospective applicants to dental ...

  10. American Dental Hygienists' Association

    MedlinePlus

    ... Working Column Journal of Dental Hygiene Author Guidelines Advertising Subscribe Resources Resources About ADHA About Promo (DO ... Member Benefits Footer Copy Legal Inquiries | Contact Us | Advertising | Media Inquiries | Staff / Board Login ©2012-2017 ADHA. ...

  11. Dental Treatment Considerations

    MedlinePlus

    ... and modifying dental treatment to accommodate altered muscle strength. Appointment Scheduling It is important to realize that ... and take advantage of the typically greater muscle strength during the morning hours. Appointments are best scheduled ...

  12. Dental Caries (Tooth Decay)

    MedlinePlus

    ... form does not collect any actual information. External Web Site Policy This graphic notice ( ) means that you are ... the link. Home Contact Us Viewers and Players Site Map FOIA Web Policies Privacy Policy National Institute of Dental and ...

  13. Diabetes: Dental Tips

    MedlinePlus

    ... form does not collect any actual information. External Web Site Policy This graphic notice ( ) means that you are ... the link. Home Contact Us Viewers and Players Site Map FOIA Web Policies Privacy Policy National Institute of Dental and ...

  14. Dental color assessment through TTB exercises

    PubMed Central

    Draghici, R; Preoteasa, CT; Ţâncu, AMC; Preoteasa, E

    2016-01-01

    Abstract Aim.To verify the impact of taking the Toothguide Training Box (TTB) exercise in improving the individual ability to correctly determine dental color. Material and method.A prospective study was conducted on the 5th year dental students. The participants were required to carry out 3 distinct steps: visual color determination for sample tabs out of the 3DMaster shade guide, the TTB exercise and another color determination after training completion. Results.The sample included 60 students (19M/ 41F) with a mean age of 24, which made 360 color determinations of 6 shade tabs before and after TTB exercise. 32,5% (n=117) of the color determinations were incorrect in both moments, and the value was incorrectly determined just in 11% of them. Students found 3L1.5 and 3M2 colors as the hardest to determine. The results suggested that a single TTB training exercise did not have a high positive influence on the individual capacity to correctly determine the color for tabs out of the shade guide. Conclusions.While there is no evidence of an immediate positive impact of the TTB exercise in evaluating and determining different color variations for sample key elements, through repeat exercises, the individual perception can be improved and thus the correct determination of dental color and its correct codification can be increased. Abbreviations: TTB = Tooth Training Box, CIE = Commission internationale de l'éclairage, L = lightness, C = chroma, H = hue PMID:27974916

  15. Dental physical examination.

    PubMed

    Baker, G J

    1998-08-01

    The objectives of the equine dental physical examination are to detect and quantify oral and dental disorders, to propose and carry out their treatment, and to implement management programs. The veterinarian should be able to offer a prognosis and to detail any future treatment or management plans that may be required. These objectives should take into account the cost of these procedures, and the veterinarian should be prepared to offer a cost-benefit analysis of the problem and the proposed cures.

  16. Dental considerations in anaesthesia

    PubMed Central

    2016-01-01

    Dental trauma as a result of anaesthesia practice is a relevant issue concerning morbidity and litigation. The investigator aimed to consolidate pertinent information on this issue to aid in the redressal of such an occurrence. A review of this relevant literature alongwith the author’s suggestions towards the management of the various kinds of dental trauma sustained as a result of anaesthesia practice is presented. PMID:27974970

  17. TRICARE Dental Programs

    DTIC Science & Technology

    2011-01-01

    enrollee – $1,500 lifetime maximum for orthodontics – Contractor: Delta Dental of California 2011 MHS Conference TRICARE Retiree Dental Program...Benefits Comprehensive benefits 12-month waiting period for crowns, prosthetics and orthodontics No waiting period if enroll within 120 days of...retiring from active duty or transfer to Retired Reserve status from National Guard or Reserve  Orthodontics for children and adults Accident coverage

  18. Dental arch asymmetry

    PubMed Central

    Al-Zubair, Nabil Muhsen

    2014-01-01

    Objective: This study was conducted to assess the dental arch asymmetry in a Yemeni sample aged (18-25) years. Materials and Methods: The investigation involved clinical examination of 1479 adults; only 253 (129 females, 124 males) out of the total sample were selected to fulfill the criteria for the study sample. Study models were constructed and evaluated to measure mandibular arch dimensions. Three linear distances were utilized on each side on the dental arch: Incisal-canine distance, canine-molar distance and incisal-molar distance, which represent the dental arch segmental measurements. Results: When applying “t-test” at P < 0.05, no significant differences were found between the right and left canine-molar, incisal-canine and incisal-molar distances in both dental arches for both sexes. The greater variation (0.30 mm) was observed between right and left canine-molar distance in the maxillary dental arch in male and the smaller (0.04 mm) in the mandibular dental arch between the right and left canine-molar distance in females. Conclusion: The findings of the present study revealed a symmetrical pattern of dental arches, since the right and left sides showed no statistically significant difference. In general, it can be observed that the measurements related to the central incisors and canines have the widest range of reading and give the impression that the location of central incisor and canines to each other and to other teeth is the strongest factor in determining the dental arch asymmetry. PMID:24966774

  19. Saliva and dental erosion

    PubMed Central

    BUZALAF, Marília Afonso Rabelo; HANNAS, Angélicas Reis; KATO, Melissa Thiemi

    2012-01-01

    Dental erosion is a multifactorial condition. The consideration of chemical, biological and behavioral factors is fundamental for its prevention and therapy. Among the biological factors, saliva is one of the most important parameters in the protection against erosive wear. Objective This review discusses the role of salivary factors on the development of dental erosion. Material and Methods A search was undertaken on MEDLINE website for papers from 1969 to 2010. The keywords used in the research were "saliva", "acquired pellicle", "salivary flow", "salivary buffering capacity" and "dental erosion". Inclusion of studies, data extraction and quality assessment were undertaken independently and in duplicate by two members of the review team. Disagreements were solved by discussion and consensus or by a third party. Results Several characteristics and properties of saliva play an important role in dental erosion. Salivary clearance gradually eliminates the acids through swallowing and saliva presents buffering capacity causing neutralization and buffering of dietary acids. Salivary flow allows dilution of the acids. In addition, saliva is supersaturated with respect to tooth mineral, providing calcium, phosphate and fluoride necessary for remineralization after an erosive challenge. Furthermore, many proteins present in saliva and acquired pellicle play an important role in dental erosion. Conclusions Saliva is the most important biological factor affecting the progression of dental erosion. Knowledge of its components and properties involved in this protective role can drive the development of preventive measures targeting to enhance its known beneficial effects. PMID:23138733

  20. Development of a Navy Dental Epidemiology Information System

    PubMed Central

    Diehl, Mark C.

    1983-01-01

    An automated dental epidemiology system was designed for installation at the Naval Regional Dental Center, Great Lakes, IL, as an ongoing information system development and test project. In this design three data entry sites serve a high volume inprocessing clinic, and two large definitive care clinics. Data from the inprocessing clinic establishes individual electronic dental records which are updated as treatment is received. Hard copy dental records are produced, as are routine reports detailing individual and group dental treatment needs. Treatment provided information is recorded in chronology files and analyzed for service evaluation and productivity determinations. Rapid data entry techniques save considerable clinician time, thus providing increased time for treatment of oral diseases. The electronic files developed are expected to be a comprehensive and timely source of information for sophisticated management and administrative systems.

  1. Dental care in patients with antiphospholipid syndrome: two case reports.

    PubMed

    Mesquita, Karine Cestaro; Teófilo, Carolina Rodrigues; Perdigão, João Paulo Veloso; Sousa, Fabrício Bitu; Alves, Ana Paula Negreiros Nunes; de Negreiros, Wagner Araújo; Mota, Mário Rogério Lima

    2017-01-01

    Antiphospholipid syndrome (APS) is a prothrombotic autoimmune disease that may be classified as primary or secondary. Treatment consists of oral anticoagulant, antiplatelet, and/or immunosuppressant drugs. This report describes the dental treatment of 2 women with APS and multiple dental concerns, including periodontal disease, caries, and missing teeth. The invasive dental procedures were performed in an outpatient setting with hematologic monitoring and use of local hemostatic measures. Neither interruption of anticoagulant medications nor administration of blood products was necessary. All of the procedures were performed without complications. To date, no recommendations for the dental care of patients with APS have been established, demonstrating a need to investigate the risks for bleeding and infection, among other concerns, during dental treatment of these patients.

  2. Dental caries in adolescents associated with caffeinated carbonated beverages.

    PubMed

    Majewski, R F

    2001-01-01

    Dental caries is an infectious disease involving all age groups. Adolescence is a period in which the risk for dental caries remains especially high. Many factors, some unique to the teenage years, contribute to the initiation and progression of dental caries in this age group. One factor with the potential for being significant is the adolescent diet, especially the high consumption of sugars. One product that tends to contribute to the amount of sugar ingested is carbonated beverages. Many soft drinks also contain significant amounts of caffeine. Regular caffeine ingestion may lead to increased, even habitual, usage. It is suggested that the combination of the consumption of highly sweetened soft drinks and habitual usage of caffeine may significantly increase a susceptible adolescent's potential for developing dental caries. Cases are presented demonstrating the early initiation and rapid progression of dental caries in three adolescents. A common factor is the ingestion of high amounts of caffeinated-carbonated soft drinks.

  3. 101. JOB NO. 1347F, SHEET 3M, 1927, ASSEMBLY BUILDING; FORD ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    101. JOB NO. 1347-F, SHEET 3M, 1927, ASSEMBLY BUILDING; FORD MOTOR COMPANY; ONE-EIGHTH SCALE OF OFFICES - Ford Motor Company Long Beach Assembly Plant, Assembly Building, 700 Henry Ford Avenue, Long Beach, Los Angeles County, CA

  4. 115. JOB NO. 1347K, SHEET 3M, 1929/1930, FORD MOTOR COMPANY; ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    115. JOB NO. 1347-K, SHEET 3M, 1929/1930, FORD MOTOR COMPANY; BOILER HOUSE ASSEMBLY PLANT; BOILER SETTING - Ford Motor Company Long Beach Assembly Plant, Assembly Building, 700 Henry Ford Avenue, Long Beach, Los Angeles County, CA

  5. The LIULIN-3M Radiometer for Measuring Particle Doses in Space and on Aircraft

    NASA Technical Reports Server (NTRS)

    Stassinopoulos, E. G.; Stauffer, C. A.; Dachev, T. P.; Brucker, G. J.; Tomov, B. T.; Dimitrov, P. G.

    1999-01-01

    This paper reports on the development of a compact radiation monitor/dosimeter, the LIULIN-3M, and on extended measurements conducted on the ground and on commercial aircraft on domestic and international flights.

  6. Measurements of Radiation Exposure on Commercial Aircraft with the LIULIN-3M Instrument

    NASA Technical Reports Server (NTRS)

    Stassinopoulos, E. G.; Stauffer, C. A.; Dachev, T. P.; Brucker, G. J.; Tomov, B. T.; Dimitrov, P. G.

    1998-01-01

    This paper reports on the development of a compact radiation monitor/dosimeter, the LIULIN-3M, and on extended measurements conducted on the ground and on commercial aircraft on domestic and international flights.

  7. The LIULIN-3M Radiometer for Measuring Particle Doses in Space and on Aircraft

    NASA Technical Reports Server (NTRS)

    Stassinopoulos, E. G.; Stauffer, C. A.; Dachev, T. P.; Tomov, B. T.; Dimitrov, P. G.; Brucker, G. J.; Obenschain, Art (Technical Monitor)

    2002-01-01

    This paper reports on the development of a compact radiation monitor/dosimeter, the LIULIN-3M, and on extended measurements conducted on the ground and on commercial aircraft on domestic and international flights.

  8. Global Economic Impact of Dental Diseases.

    PubMed

    Listl, S; Galloway, J; Mossey, P A; Marcenes, W

    2015-10-01

    Reporting the economic burden of oral diseases is important to evaluate the societal relevance of preventing and addressing oral diseases. In addition to treatment costs, there are indirect costs to consider, mainly in terms of productivity losses due to absenteeism from work. The purpose of the present study was to estimate the direct and indirect costs of dental diseases worldwide to approximate the global economic impact. Estimation of direct treatment costs was based on a systematic approach. For estimation of indirect costs, an approach suggested by the World Health Organization's Commission on Macroeconomics and Health was employed, which factored in 2010 values of gross domestic product per capita as provided by the International Monetary Fund and oral burden of disease estimates from the 2010 Global Burden of Disease Study. Direct treatment costs due to dental diseases worldwide were estimated at US$298 billion yearly, corresponding to an average of 4.6% of global health expenditure. Indirect costs due to dental diseases worldwide amounted to US$144 billion yearly, corresponding to economic losses within the range of the 10 most frequent global causes of death. Within the limitations of currently available data sources and methodologies, these findings suggest that the global economic impact of dental diseases amounted to US$442 billion in 2010. Improvements in population oral health may imply substantial economic benefits not only in terms of reduced treatment costs but also because of fewer productivity losses in the labor market.

  9. 42 CFR Appendix G to Part 75 - Standards for Licensing Dental Hygienists and Dental Assistants in Dental Radiography

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... Dental Assistants in Dental Radiography G Appendix G to Part 75 Public Health PUBLIC HEALTH SERVICE...—Standards for Licensing Dental Hygienists and Dental Assistants in Dental Radiography The following section... individual State licensure processes, all of which include assessment of competence in dental radiography....

  10. 42 CFR Appendix G to Part 75 - Standards for Licensing Dental Hygienists and Dental Assistants in Dental Radiography

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... Dental Assistants in Dental Radiography G Appendix G to Part 75 Public Health PUBLIC HEALTH SERVICE...—Standards for Licensing Dental Hygienists and Dental Assistants in Dental Radiography The following section... individual State licensure processes, all of which include assessment of competence in dental radiography....

  11. 42 CFR Appendix G to Part 75 - Standards for Licensing Dental Hygienists and Dental Assistants in Dental Radiography

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... Dental Assistants in Dental Radiography G Appendix G to Part 75 Public Health PUBLIC HEALTH SERVICE...—Standards for Licensing Dental Hygienists and Dental Assistants in Dental Radiography The following section... individual State licensure processes, all of which include assessment of competence in dental radiography....

  12. 42 CFR Appendix G to Part 75 - Standards for Licensing Dental Hygienists and Dental Assistants in Dental Radiography

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... Dental Assistants in Dental Radiography G Appendix G to Part 75 Public Health PUBLIC HEALTH SERVICE...—Standards for Licensing Dental Hygienists and Dental Assistants in Dental Radiography The following section... individual State licensure processes, all of which include assessment of competence in dental radiography....

  13. Influence of dental materials on dental MRI

    PubMed Central

    Tymofiyeva, O; Vaegler, S; Rottner, K; Boldt, J; Hopfgartner, AJ; Proff, PC; Richter, E-J; Jakob, PM

    2013-01-01

    Objectives: To investigate the potential influence of standard dental materials on dental MRI (dMRI) by estimating the magnetic susceptibility with the help of the MRI-based geometric distortion method and to classify the materials from the standpoint of dMRI. Methods: A series of standard dental materials was studied on a 1.5 T MRI system using spin echo and gradient echo pulse sequences and their magnetic susceptibility was estimated using the geometric method. Measurements on samples of dental materials were supported by in vivo examples obtained in dedicated dMRI procedures. Results: The tested materials showed a range of distortion degrees. The following materials were classified as fully compatible materials that can be present even in the tooth of interest: the resin-based sealer AH Plus® (Dentsply, Maillefer, Germany), glass ionomer cement, gutta-percha, zirconium dioxide and composites from one of the tested manufacturers. Interestingly, composites provided by the other manufacturer caused relatively strong distortions and were therefore classified as compatible I, along with amalgam, gold alloy, gold–ceramic crowns, titanium alloy and NiTi orthodontic wires. Materials, the magnetic susceptibility of which differed from that of water by more than 200 ppm, were classified as non-compatible materials that should not be present in the patient’s mouth for any dMRI applications. They included stainless steel orthodontic appliances and CoCr. Conclusions: A classification of the materials that complies with the standard grouping of materials according to their magnetic susceptibility was proposed and adopted for the purposes of dMRI. The proposed classification can serve as a guideline in future dMRI research. PMID:23610088

  14. Impact of community externships on the clinical performance of senior dental students.

    PubMed

    Mashabi, Samar; Mascarenhas, Ana Karina

    2011-10-01

    This study examined the impact of community dental rotations on the clinical productivity of senior students when they returned to the dental school clinic. Data from two classes at the Boston University Henry M. Goldman School of Dental Medicine were used to compare productivity pre- and post-externship experiences (continuous ten weeks), controlling for several confounding variables. The results indicated a statistically significant and clinically important increase in post-rotation student productivity and revenues. This study suggests that community clinic rotations could offset the loss of dental school revenues during the externship period.

  15. History of dental hygiene research.

    PubMed

    Bowen, Denise M

    2013-01-01

    Dental hygiene is defined as the science and practice of the recognition, treatment and prevention of oral diseases. The history of dental hygiene research is considered in the context of the development of the discipline and an emerging infrastructure. Research-related events supporting the growth and maturation of the profession are considered from the early years to the most recent. The benefits of preventive oral health services provided by dental hygienists have been supported by research, and the practice of dental hygiene has expanded as a result of research findings since its inception 100 years ago. Dental hygienists' engagement in research, however, did not begin until the 1960s as research associates or administrators, primarily with dental researchers as primary investigators. The Journal of Dental Hygiene (JDH) has provided information for dental hygiene practice since 1927, and has been the primary venue for dissemination of dental hygiene research since 1945. Graduate education in dental hygiene at the master's degree level and the work of early dental hygiene researchers led to the first conference on dental hygiene research in 1982. Over 30 years later, dental hygiene has established a meta-paradigm and defined conceptual models, built an initial infrastructure to support research endeavors and contributed much to the development of dental hygiene as a unique discipline. A doctoral degree in the discipline, continued theory-based research, initiatives to foster collaborations between dental hygiene and other researchers and enhanced capabilities to attract funding to support large scale studies are goals that must be attained through the efforts of future researchers to address the needs for additional development in the discipline of dental hygiene. Dental hygiene research supports the growing discipline and its value to society.

  16. Dental Implantology in U.S. Dental Schools.

    ERIC Educational Resources Information Center

    Bavitz, J. Bruce

    1990-01-01

    The results of a survey of 44 dental schools corroborate the belief that dental implantology is gaining widespread acceptance in U.S. dental schools. Currently, predoctoral students have limited clinical participation. Most programs have taken the position that clinical techniques are best taught within the existing specialties at a graduate…

  17. Bulimia and Anorexia Nervosa in Dental and Dental Hygiene Curricula.

    ERIC Educational Resources Information Center

    Gross, Karen B. W.; And Others

    1990-01-01

    Dentists and dental hygienists are in a unique position to identify an eating disorder patient from observed oral manifestations and to refer the patient for psychological therapy. The inclusion of information on general and oral complications of bulimia and anorexia nervosa in dental and dental hygiene curriculum was examined. (MLW)

  18. Panoramic Dental X-Ray

    MedlinePlus

    ... Physician Resources Professions Site Index A-Z Panoramic Dental X-ray Panoramic dental x-ray uses a ... Your e-mail address: Personal message (optional): Bees: Wax: Notice: RadiologyInfo respects your privacy. Information entered here ...

  19. Nutrition and dental caries.

    PubMed

    Mobley, Connie C

    2003-04-01

    Promotion of sound dietary practices is an essential component of caries management, along with fluoride exposure and oral hygiene practices. Scientific discoveries have lead to better understanding of the caries process, the ever-expanding food supply, and the interaction between the two. Fermentable carbohydrates interact dynamically with oral bacteria and saliva, and these foods will continue to be a major part of a healthful diet. Dental health professionals can serve their patients and the public by providing comprehensive oral health care and by promoting lifestyle behaviors to improve oral and general health within the time constraints of their practice. Dietary advice given should not contradict general health principles when providing practical guidance to reduce caries risk. The following principles should guide messages: * Encourage balanced diets based on moderation and variety as depicted by the Food Guide Pyramid and the Dietary Guidelines for Americans to provide a sound approach. Avoid references to "bad" foods and focus on "good" diets that include a variety of foods. * Give examples of how combining and sequencing foods can enhance mastication, saliva production, and oral clearance at each eating occasion. Combining dairy foods with sugary foods, raw foods with cooked, and protein-rich foods with acidogenic foods are all good examples. Suggest that eating and drinking be followed by cariostatic foods such as xylitol chewing gum. * Drink water to satisfy thirst and hydration needs as often as possible. Restrict consumption of sweetened beverages to meal and snack times when they can be combined with other cariostatic foods. * When a patient reports excessive dietary intake of a fermentable carbohydrate to the point of displacing other important foods in the diet, identify alternatives that will help the patient maintain or achieve a healthy body weight, oral health status, and a nutrient-dense intake.

  20. Understanding the chemistry of dental erosion.

    PubMed

    Shellis, R Peter; Featherstone, John D B; Lussi, Adrian

    2014-01-01

    Dental erosion is caused by repeated short episodes of exposure to acids. Dental minerals are calcium-deficient, carbonated hydroxyapatites containing impurity ions such as Na(+), Mg(2+) and Cl(-). The rate of dissolution, which is crucial to the progression of erosion, is influenced by solubility and also by other factors. After outlining principles of solubility and acid dissolution, this chapter describes the factors related to the dental tissues on the one hand and to the erosive solution on the other. The impurities in the dental mineral introduce crystal strain and increase solubility, so dentine mineral is more soluble than enamel mineral and both are more soluble than hydroxyapatite. The considerable differences in structure and porosity between dentine and enamel influence interactions of the tissues with acid solutions, so the relative rates of dissolution do not necessarily reflect the respective solubilities. The rate of dissolution is further influenced strongly by physical factors (temperature, flow rate) and chemical factors (degree of saturation, presence of inhibitors, buffering, pH, fluoride). Temperature and flow rate, as determined by the method of consumption of a product, strongly influence erosion in vivo. The net effect of the solution factors determines the overall erosive potential of different products. Prospects for remineralization of erosive lesions are evaluated.

  1. Credibility and Confidence in Your Dental Laboratory Work-How Quality Assurance Systems Can Be Used in the Manufacturing of Individual Custom-Made Dental Devices.

    PubMed

    Griffin, Anthony

    2015-08-01

    Manufacturing of custom-made dental devices such as removable dentures, fixed prosthodontics and orthodontics are subject to the requirements of the Medical Devices Directive (MDD). Many dental laboratories often enhance these requirements by implementing quality assurance procedures that then provide enhanced consistency. This paper provided a personal view of some of the systems currently being used in dental laboratories to provide a quality assured product and associated issues.

  2. Manipulation of electronic structure via alteration of local orbital environment in [(SrIrO3)m,(SrTi O3)] (m =1 ,2 ,and ∞ ) superlattices

    NASA Astrophysics Data System (ADS)

    Kim, So Yeun; Kim, Choong H.; Sandilands, L. J.; Sohn, C. H.; Matsuno, J.; Takagi, H.; Kim, K. W.; Lee, Y. S.; Moon, S. J.; Noh, T. W.

    2016-12-01

    We investigated the electronic structure of [(SrIrO3)m,(SrTi O3)] (m =1 ,2 ,and ∞ ) superlattice (SL) thin films with optical spectroscopy and first principles calculations. Our optical results confirmed the existence of the Jeff= 1 /2 states in SL samples, similar to the bulk Ruddlesden-Popper series S rn+1I rnO3 n +1 iridates. Apart from this similarity, in the SL samples, we observed red shifts of the characteristic optical excitations in the Jeff= 1 /2 state and an enhancement of the low-energy spectral weight, which implies a reduction in the effective electron correlation for bands near the Fermi energy. The density functional theory plus Coulomb interactions (DFT +U ) calculations suggested that the SrTi O3 layer intervened between SrIr O3 layers in the SLs activated additional hopping channels between the Ir ions, thus increasing the bandwidth and reducing the effective strength of the correlations. This paper demonstrates that fabrication of iridium-based heterostructures can be used to finely tune electronic structures via alteration of their local orbital environments.

  3. Evaluation of 3M molecular detection assay (MDA) Salmonella for the detection of Salmonella in selected foods: collaborative study.

    PubMed

    Bird, Patrick; Fisher, Kiel; Boyle, Megan; Huffman, Travis; Benzinger, M Joseph; Bedinghaus, Paige; Flannery, Jonathan; Crowley, Erin; Agin, James; Goins, David; Benesh, DeAnn; David, John

    2013-01-01

    The 3M Molecular Detection Assay (MDA) Salmonella is used with the 3M Molecular Detection System for the detection of Salmonella spp. in food, food-related, and environmental samples after enrichment. The assay utilizes loop-mediated isothermal amplification to rapidly amplify Salmonella target DNA with high specificity and sensitivity, combined with bioluminescence to detect the amplification. The 3M MDA Salmonella method was compared using an unpaired study design in a multilaboratory collaborative study to the U.S. Department of Agriculture/Food Safety and Inspection Service-Microbiology Laboratory Guidebook (USDA/FSIS-MLG 4.05), Isolation and Identification of Salmonella from Meat, Poultry, Pasteurized Egg and Catfish Products for raw ground beef and the U.S. Food and Drug Administration/Bacteriological Analytical Manual (FDA/BAM) Chapter 5 Salmonella reference method for wet dog food following the current AOAC guidelines. A total of 20 laboratories participated. For the 3M MDA Salmonella method, raw ground beef was analyzed using 25 g test portions, and wet dog food was analyzed using 375 g test portions. For the reference methods, 25 g test portions of each matrix were analyzed. Each matrix was artificially contaminated with Salmonella at three inoculation levels: an uninoculated control level (0 CFU/test portion), a low inoculum level (0.2-2 CFU/test portion), and a high inoculum level (2-5 CFU/test portion). In this study, 1512 unpaired replicate samples were analyzed. Statistical analysis was conducted according to the probability of detection (POD). For the low-level raw ground beef test portions, the following dLPOD (difference between the POD of the reference and candidate method) values with 95% confidence intervals were obtained: -0.01 (-0.14, +0.12). For the low-level wet dog food test portions, the following dLPOD with 95% confidence intervals were obtained: -0.04 (-0.16, +0.09). No significant differences were observed in the number of positive

  4. The Primary Dental Care Workforce.

    ERIC Educational Resources Information Center

    Neenan, M. Elaine; And Others

    1993-01-01

    A study describes the characteristics of the current primary dental care workforce (dentists, hygienists, assistants), its distribution, and its delivery system in private and public sectors. Graduate dental school enrollments, trends in patient visits, employment patterns, state dental activities, and workforce issues related to health care…

  5. Dental ethics and emotional intelligence.

    PubMed

    Rosenblum, Alvin B; Wolf, Steve

    2014-01-01

    Dental ethics is often taught, viewed, and conducted as an intell enterprise, uninformed by other noncognitive factors. Emotional intelligence (EQ) is defined distinguished from the cognitive intelligence measured by Intelligence Quotient (IQ). This essay recommends more inclusion of emotional, noncognitive input to the ethical decision process in dental education and dental practice.

  6. Dental therapists: a global perspective.

    PubMed

    Nash, David A; Friedman, Jay W; Kardos, Thomas B; Kardos, Rosemary L; Schwarz, Eli; Satur, Julie; Berg, Darren G; Nasruddin, Jaafar; Mumghamba, Elifuraha G; Davenport, Elizabeth S; Nagel, Ron

    2008-04-01

    In 1921, New Zealand began training school dental nurses, subsequently deploying them throughout the country in school-based clinics providing basic dental care for children. The concept of training dental nurses, later to be designated dental therapists, was adopted by other countries as a means of improving access to care, particularly for children. This paper profiles six countries that utilise dental therapists, with a description of the training that therapists receive in these countries, and the context in which they practice. Based on available demographic information, it also updates the number of dental therapists practising globally, as well as the countries in which they practice. In several countries, dental therapy is now being integrated with dental hygiene in training and practice to create a new type of professional complementary to a dentist. Increasingly, dental therapists are permitted to treat adults as well as children. The paper also describes the status of a current initiative to introduce dental therapy to the United States. It concludes by suggesting that dental therapists can become valued members of the dental team throughout the world, helping to improve access to care and reducing existing disparities in oral health.

  7. Dental Assistant Specialist. (AFSC 98150).

    ERIC Educational Resources Information Center

    Eling, David R.

    This four-volume student text is designed for use by Air Force personnel enrolled in a self-study extension course for dental assistant specialists. Covered in the individual volumes are an introduction to dental services (the mission and organization of medical/dental service, career ladder progressions, medical readiness/wartime training, and…

  8. Dental Laboratory Technology Program Standards.

    ERIC Educational Resources Information Center

    Georgia Univ., Athens. Dept. of Vocational Education.

    This guide contains 45 program standards for the dental laboratory technology program conducted in technical institutes in Georgia. The dental laboratory technology program, either diploma or associate degree, is designed to ensure that students gain basic competence in the job skills needed for an entry-level employee in dental laboratory…

  9. The Future Dental Education Process.

    ERIC Educational Resources Information Center

    Hjorting-Hansen, Erik

    1996-01-01

    Directions for dental education are examined, with reference made to a number of recent background papers and an Institute of Medicine report on dental education in the United States. Greater integration with other health sciences, development of dental faculty teaching skills, and greater use of apprenticeships and continuing education are…

  10. Associations among predental credentials and measures of dental school achievement.

    PubMed

    Holmes, David C; Doering, John V; Spector, Michael

    2008-02-01

    The purpose of this study was to investigate the associations among several dental school admission criteria and several measures of dental school achievement. Data were collected for 2000-07 University of Iowa dentistry graduates, including five specific preadmission credentials and five specific measures of dental school achievement for each student. Pearson product moment correlations or Mann-Whitney U statistics were computed for the association of each of the ten variables with the nine others. The strongest correlation observed was between predental science grade point average (GPA) and overall predental GPA. Dental Admission Test (DAT) Academic Average was very strongly correlated with DAT Total Science, and both of these were each moderately correlated with DAT Perceptual Ability, predental science GPA, and overall predental GPA. Among the measures of dental school achievement, the strongest association was observed between National Board Dental Examination (NBDE) scores and dental school GPA. These were also moderately correlated with final clinical grade. All of the measures of dental school achievement were slightly stronger for candidates who passed the Central Regional Dental Testing Service (CRDTS) examination than for those who failed that exam. Of the predental credentials considered, predental science GPA and overall predental GPA were the best predictors of dental school GPA. DAT Academic Average was the best predictor of NBDE scores. Although DAT Perceptual Ability was the best predictor of clinical competency at the time of graduation, these two variables were only weakly correlated. DAT Perceptual Ability scores and overall predental GPA were slightly higher for candidates who passed the CRDTS examination than for those who failed that exam.

  11. Effect of different disinfection protocols on microbial and biofilm contamination of dental unit waterlines in community dental practices.

    PubMed

    Dallolio, Laura; Scuderi, Amalia; Rini, Maria S; Valente, Sabrina; Farruggia, Patrizia; Sabattini, Maria A Bucci; Pasquinelli, Gianandrea; Acacci, Anna; Roncarati, Greta; Leoni, Erica

    2014-02-18

    Output water from dental unit waterlines (DUWLs) may be a potential source of infection for both dental healthcare staff and patients. This study compared the efficacy of different disinfection methods with regard to the water quality and the presence of biofilm in DUWLs. Five dental units operating in a public dental health care setting were selected. The control dental unit had no disinfection system; two were disinfected intermittently with peracetic acid/hydrogen peroxide 0.26% and two underwent continuous disinfection with hydrogen peroxide/silver ions (0.02%) and stabilized chlorine dioxide (0.22%), respectively. After three months of applying the disinfection protocols, continuous disinfection systems were more effective than intermittent systems in reducing the microbial contamination of the water, allowing compliance with the CDC guidelines and the European Council regulatory thresholds for drinking water. P. aeruginosa, Legionella spp, sulphite-reducing Clostridium spores, S. aureus and β-haemolytic streptococci were also absent from units treated with continuous disinfection. The biofilm covering the DUWLs was more extensive, thicker and more friable in the intermittent disinfection dental units than in those with continuous disinfection. Overall, the findings showed that the products used for continuous disinfection of dental unit waterlines showed statistically better results than the intermittent treatment products under the study conditions.

  12. Effect of Different Disinfection Protocols on Microbial and Biofilm Contamination of Dental Unit Waterlines in Community Dental Practices

    PubMed Central

    Dallolio, Laura; Scuderi, Amalia; Rini, Maria S.; Valente, Sabrina; Farruggia, Patrizia; Bucci Sabattini, Maria A.; Pasquinelli, Gianandrea; Acacci, Anna; Roncarati, Greta; Leoni, Erica

    2014-01-01

    Output water from dental unit waterlines (DUWLs) may be a potential source of infection for both dental healthcare staff and patients. This study compared the efficacy of different disinfection methods with regard to the water quality and the presence of biofilm in DUWLs. Five dental units operating in a public dental health care setting were selected. The control dental unit had no disinfection system; two were disinfected intermittently with peracetic acid/hydrogen peroxide 0.26% and two underwent continuous disinfection with hydrogen peroxide/silver ions (0.02%) and stabilized chlorine dioxide (0.22%), respectively. After three months of applying the disinfection protocols, continuous disinfection systems were more effective than intermittent systems in reducing the microbial contamination of the water, allowing compliance with the CDC guidelines and the European Council regulatory thresholds for drinking water. P. aeruginosa, Legionella spp, sulphite-reducing Clostridium spores, S. aureus and β-haemolytic streptococci were also absent from units treated with continuous disinfection. The biofilm covering the DUWLs was more extensive, thicker and more friable in the intermittent disinfection dental units than in those with continuous disinfection. Overall, the findings showed that the products used for continuous disinfection of dental unit waterlines showed statistically better results than the intermittent treatment products under the study conditions. PMID:24552789

  13. Dental amalgam: An update

    PubMed Central

    Bharti, Ramesh; Wadhwani, Kulvinder Kaur; Tikku, Aseem Prakash; Chandra, Anil

    2010-01-01

    Dental amalgam has served as an excellent and versatile restorative material for many years, despite periods of controversy. The authors review its history, summarize the evidence with regard to its performance and offer predictions for the future of this material. The PubMed database was used initially; the reference list for dental amalgam featured 8641 articles and 13 publications dealing with recent advances in dental amalgam. A forward search was undertaken on selected articles and using some author names. For the present, amalgam should remain the material of choice for economic direct restoration of posterior teeth. When esthetic concerns are paramount, tooth-colored materials, placed meticulously, can provide an acceptable alternative. All alternative restorative materials and procedures, however, have certain limitations. PMID:21217947

  14. Dental pulp stem cells

    PubMed Central

    Ashri, Nahid Y.; Ajlan, Sumaiah A.; Aldahmash, Abdullah M.

    2015-01-01

    Inflammatory periodontal disease is a major cause of loss of tooth-supporting structures. Novel approaches for regeneration of periodontal apparatus is an area of intensive research. Periodontal tissue engineering implies the use of appropriate regenerative cells, delivered through a suitable scaffold, and guided through signaling molecules. Dental pulp stem cells have been used in an increasing number of studies in dental tissue engineering. Those cells show mesenchymal (stromal) stem cell-like properties including self-renewal and multilineage differentiation potentials, aside from their relative accessibility and pleasant handling properties. The purpose of this article is to review the biological principles of periodontal tissue engineering, along with the challenges facing the development of a consistent and clinically relevant tissue regeneration platform. This article includes an updated review on dental pulp stem cells and their applications in periodontal regeneration, in combination with different scaffolds and growth factors. PMID:26620980

  15. 3M Tecra Listeria Visual Immunoassay: AOAC Official Methods 995.22 and 2002.09.

    PubMed

    Benesh, Deann L; Crowley, Erin S; Bird, Patrick M

    2013-01-01

    A validation study of the 3M Tecra Listeria Visual Immunoassay (VIA; 3M Food Safety, St. Paul, MN) was conducted at Q Laboratories, Inc., Cincinnati, OH. The 3M Tecra Listeria VIA method was compared to the Health Canada MFHPB-30 reference method for the analysis of five ready-to-eat (RTE) meats: deli turkey, hot dogs, liver pate, raw fermented sausage, and deli ham, and on a stainless steel environmental surface. Twenty replicates of each of the five food matrixes were analyzed at a low and a high inoculum level. The low-level test portions were inoculated with 0.2-2 CFU/25 g, and the high-level test portions with 2-5 CFU/25 g. In addition, 20 replicates of one environmental surface were analyzed at a low and a high inoculum level. The low-level sampling area was inoculated with 0.2-2 CFU/5 cm2, and the high-level area with 2-5 CFU/5 cm2. Five control replicates were also analyzed at 0 CFU/25 g (uninoculated) for the foods and at 0 CFU/5 cm2 for the environmental sampling area. There was no significant difference in the number of positives detected by the 3M Tecra Listeria VIA and the Health Canada MFHPB-30 reference method for four of the RTE meats and the stainless steel environmental surface analyzed in this study. For the raw, fermented sausage, there was a significant difference in the number of positives detected for the high inoculum level by the 3M Tecra Listeria VIA and the Health Canada MFHPB-30 reference method, with the 3M Tecra Listeria VIA method detecting more positives.

  16. Flux growth of MBO3 (M=Fe, Ga, In, Sc, Lu) single crystals

    NASA Astrophysics Data System (ADS)

    Ovchinnikov, S. G.; Rudenko, V. V.

    2016-12-01

    The temperatures for saturation of the MBO3 (M=Fe, Ga, In, Sc, Lu) compounds in the M2O3-B2O3- (70 PbO-30 PbF2, wt%) solvents are determined. The growth rates of FeBO3 and GaBO3 crystal faces as functions of the flux supercooling are obtained. It is demonstrated that the bulk FeBO3 and GaBO3 crystals can be grown in a narrow flux supercooling range using a controlled seeding technique. The MBO3 (M=In, Sc, Lu) crystals in the form of (111) plates are synthesized by spontaneous crystallization.

  17. Model experience in the Langley 0.3-m transonic cryogenic tunnel

    NASA Technical Reports Server (NTRS)

    Lawing, P. L.; Kilgore, R. A.

    1981-01-01

    The model building, development, and testing experience gained during 8 years of operation of the 0.3-m Transonic Cryogenic Tunnel (TCT) is summarized. The summary is divided into four portions: (1) models tested in the 0.3-m TCT's original octagonal test section; (2) models tested in the present two dimensional test section; (3) models tested as a part of tunnel calibration and the development of advanced technology airfoils; and (4) development of a new way to construct two dimensional airfoil models. Design requirements imposed on the models by high Reynolds number testing at cryogenic temperatures are reviewed.

  18. Performance of Dental Ceramics

    PubMed Central

    Rekow, E.D.; Silva, N.R.F.A.; Coelho, P.G.; Zhang, Y.; Guess, P.; Thompson, V.P.

    2011-01-01

    The clinical success of modern dental ceramics depends on an array of factors, ranging from initial physical properties of the material itself, to the fabrication and clinical procedures that inevitably damage these brittle materials, and the oral environment. Understanding the influence of these factors on clinical performance has engaged the dental, ceramics, and engineering communities alike. The objective of this review is to first summarize clinical, experimental, and analytic results reported in the recent literature. Additionally, it seeks to address how this new information adds insight into predictive test procedures and reveals challenges for future improvements. PMID:21224408

  19. Epilepsy in dental practice.

    PubMed

    Fitzpatrick, J J; McArdle, N S; Wilson, M H; Stassen, L F A

    2008-01-01

    Epilepsy is a neurological condition characterised by seizure activity. It has an approximate incidence of 1%. General dental practitioners will encounter these patients in practice. This article discusses the types of epilepsy, the medical management and considerations in dental management of epileptic patients. General recommendations are made, based on current evidence, with respect to prescribing of medications. The management of an epileptic seizure is discussed. Status epilepticus is a rare but serious complication of epileptic seizures. An easy-to-follow algorithm is provided to assist the practitioner in managing seizures.

  20. Dry rehydratable film method for rapid enumeration of coliforms in foods (3M Petrifilm Rapid Coliform Count plate): collaborative study.

    PubMed

    Kinneberg, Karen M; Lindberg, Kathryn G

    2002-01-01

    A rehydratable dry-film plating method for coliforms in foods, the 3M Petrifilm Rapid Coliform Count plate method, was compared with the U.S. Food and Drug Administration's Bacteriological Analytical Manual method for nondairy foods and the American Public Health Association's Standard Methods for the Examination of Dairy Products (SMEDP) method for dairy foods. Six food types, vanilla ice cream, cheddar cheese, fresh refrigerated uncooked pasta, wheat flour, prepared frozen macaroni and cheese, and frozen hash browns, were analyzed for coliforms by 11 collaborating laboratories. For each food product tested, the collaborators received 8 blind samples consisting of a control sample and 3 levels of inoculated sample, each in duplicate. The mean log counts for the methods were comparable. The repeatability and reproducibility variances of the Petrifilm Rapid Coliform Count method at 14 and 24 h were not significantly different from those of the standard methods.

  1. The hydrazide/hydrazone click reaction as a biomolecule labeling strategy for M(CO)3 (M = Re, (99m)Tc) radiopharmaceuticals.

    PubMed

    Ganguly, Tanushree; Kasten, Benjamin B; Bučar, Dejan-Krešimir; MacGillivray, Leonard R; Berkman, Clifford E; Benny, Paul D

    2011-12-28

    Facile reactivity of hydrazides and aldehydes was explored as potential coupling partners for incorporation into M(CO)(3) (M = Re, (99m)Tc) based radiopharmaceuticals. Both 'click, then chelate' and 'prelabel, then click' synthetic routes produced identical products in high yields and lacked metal-hydrazide/-hydrazone interactions, highlighting the potential of this click strategy.

  2. Nine years of DentEd--a global perspective on dental education.

    PubMed

    Reynolds, P A; Eaton, K A; Paganelli, C; Shanley, D

    2008-08-23

    This paper describes the three successive and successful DentEd projects, funded by the European Union, that established a productive thematic network which identified common content within the dental curriculum. It then developed an agreed professional profile, with a defined set of competences and a modular curriculum for all new dental graduates based on the European Credit Transfer System and trends in learning and assessment. The three phases took nine years to complete. Phase one investigated all aspects of dental undergraduate education and included over 30 visits to different dental schools by teams of dental educators. Phase two built on this work and included further visits to dental schools. Phase three refined the competency framework that had been developed in phase two and culminated in a global dental conference which finalised position papers on all aspects of dental education. The work and recommendations of the ICT in dental education group are considered in detail in the paper. The projects provided the stimulus for a number of European and international collaborations, including the web-based International Federation of Dental Education and Associations (IFDEA) Knowledge Centre and the International Virtual Dental School (IVIDENT), both of which aim to make increasingly sophisticated ICT-based educational material available worldwide and to promote international understanding.

  3. CDKN3 mRNA as a Biomarker for Survival and Therapeutic Target in Cervical Cancer

    PubMed Central

    Barrón, Eira Valeria; Roman-Bassaure, Edgar; Sánchez-Sandoval, Ana Laura; Espinosa, Ana María; Guardado-Estrada, Mariano; Medina, Ingrid; Juárez, Eligia; Alfaro, Ana; Bermúdez, Miriam; Zamora, Rubén; García-Ruiz, Carlos; Gomora, Juan Carlos; Kofman, Susana; Pérez-Armendariz, E. Martha; Berumen, Jaime

    2015-01-01

    The cyclin-dependent kinase inhibitor 3 (CDKN3) gene, involved in mitosis, is upregulated in cervical cancer (CC). We investigated CDKN3 mRNA as a survival biomarker and potential therapeutic target for CC. CDKN3 mRNA was measured in 134 CC and 25 controls by quantitative PCR. A 5-year survival study was conducted in 121 of these CC patients. Furthermore, CDKN3-specific siRNAs were used to investigate whether CDKN3 is involved in proliferation, migration, and invasion in CC-derived cell lines (SiHa, CaSki, HeLa). CDKN3 mRNA was on average 6.4-fold higher in tumors than in controls (p = 8 x 10−6, Mann-Whitney). A total of 68.2% of CC patients over expressing CDKN3 gene (fold change ≥ 17) died within two years of diagnosis, independent of the clinical stage and HPV type (Hazard Ratio = 5.0, 95% CI: 2.5–10, p = 3.3 x 10−6, Cox proportional-hazards regression). In contrast, only 19.2% of the patients with lower CDKN3 expression died in the same period. In vitro inactivation of CDKN3 decreased cell proliferation on average 67%, although it had no effect on cell migration and invasion. CDKN3 mRNA may be a good survival biomarker and potential therapeutic target in CC. PMID:26372210

  4. Attenuation of kindling-induced decreases in NT-3 mRNA by thyroid hormone depletion.

    PubMed

    Kim, S Y; Smith, M A; Post, R M; Rosen, J B

    1998-02-01

    The expression of neurotrophins is altered by amygdala kindled seizures. Because thyroid hormone can regulate the transcription of neurotrophins, we asked whether thyroid hormone regulates neurotrophin mRNA expression following amygdala kindling. Rats with electrodes implanted in the basolateral nucleus of the amygdala were either depleted of thyroid hormone or given excess thyroid hormone. The rats were then kindled daily until they had one generalized seizure. The brains were removed 4 h after the seizure and processed for in situ hybridization of nerve growth factor (NGF), brain-derived neurotrophic factor (BDNF) and neurotrophin-3 (NT-3) mRNAs. In non-kindled rats, thyroid hormone depletion increased the levels of BDNF mRNA in the paraventricular nucleus of the hypothalamus and the pituitary gland. NGF and NT-3 mRNA expression was not altered. In addition, thyroid hormone manipulations had no effect on kindling or on kindling-induced BDNF and NGF mRNA. However, the kindling-induced decrease in NT-3 mRNA expression in the dentate gyrus granule cell layer was significantly attenuated by thyroid hormone depletion. These effects were reversed by thyroid hormone replacement. The results indicate that thyroid hormone plays a modulatory role in the seizure-induced changes of NT-3 mRNA expression found in the dentate gyrus.

  5. CDKN3 mRNA as a Biomarker for Survival and Therapeutic Target in Cervical Cancer.

    PubMed

    Barrón, Eira Valeria; Roman-Bassaure, Edgar; Sánchez-Sandoval, Ana Laura; Espinosa, Ana María; Guardado-Estrada, Mariano; Medina, Ingrid; Juárez, Eligia; Alfaro, Ana; Bermúdez, Miriam; Zamora, Rubén; García-Ruiz, Carlos; Gomora, Juan Carlos; Kofman, Susana; Pérez-Armendariz, E Martha; Berumen, Jaime

    2015-01-01

    The cyclin-dependent kinase inhibitor 3 (CDKN3) gene, involved in mitosis, is upregulated in cervical cancer (CC). We investigated CDKN3 mRNA as a survival biomarker and potential therapeutic target for CC. CDKN3 mRNA was measured in 134 CC and 25 controls by quantitative PCR. A 5-year survival study was conducted in 121 of these CC patients. Furthermore, CDKN3-specific siRNAs were used to investigate whether CDKN3 is involved in proliferation, migration, and invasion in CC-derived cell lines (SiHa, CaSki, HeLa). CDKN3 mRNA was on average 6.4-fold higher in tumors than in controls (p = 8 x 10-6, Mann-Whitney). A total of 68.2% of CC patients over expressing CDKN3 gene (fold change ≥ 17) died within two years of diagnosis, independent of the clinical stage and HPV type (Hazard Ratio = 5.0, 95% CI: 2.5-10, p = 3.3 x 10-6, Cox proportional-hazards regression). In contrast, only 19.2% of the patients with lower CDKN3 expression died in the same period. In vitro inactivation of CDKN3 decreased cell proliferation on average 67%, although it had no effect on cell migration and invasion. CDKN3 mRNA may be a good survival biomarker and potential therapeutic target in CC.

  6. A DS106 Thing Happened on the Way to the 3M Tech Forum

    ERIC Educational Resources Information Center

    Lockridge, Rochelle; Levine, Alan; Funes, Mariana

    2014-01-01

    This case study illustrates how DS106, a computer science course in Digital Storytelling from the University of Mary Washington (UMW) and accessible as an open course on the web, is being explored in a corporate environment at 3M, an American multinational corporation based in St. Paul, Minnesota, to build community, collaboration, and more…

  7. Review of Spaceflight Dental Emergencies

    NASA Technical Reports Server (NTRS)

    Menon, Anil

    2012-01-01

    All exploration class missions--extending beyond earth's orbit--differ from existing orbital missions by being of longer duration and often not having a means of evacuation. If an exploration mission extends beyond a year, then there will be a greater lapse since the crewmembers last terrestrial dental exams, which routinely occur each year. This increased time since professional dental care could increase the chance of a dental emergency such as intractable pain, dental decay requiring a temporary filling, crown replacement, exposed pulp, abscess, tooth avulsion, or toothache. Additionally, any dental emergency will have to be treated in-flight with available resources and personnel who may not have extensive training in dental care. Thus, dental emergencies are an important risk to assess in preparation for exploration missions.

  8. Drugs that promote dental caries.

    PubMed

    2015-02-01

    Dental caries result from erosion of tooth enamel or cementum by acidic substances produced by bacteria found in dental plaque. Caries can lead to pulp necrosis and tooth loss. Risk factors include certain dietary habits, poor oral hygiene, and dry mouth. Diabetes and Sjogren's syndrome can also promote dental caries. Psychotropic substances such as cocaine, methamphetamine, heroin and cannabis can promote dental caries. Many medicinal drugs facilitate the formation of dental caries, through various mechanisms; they include formulations with a high sugar content; drugs that cause dry mouth (especially antimuscarinics); drugs that lower the buccal pH (inhaled powders, etc.); and drugs that cause demineralisation (tetracyclines, etc.). In practice, patients (and parents) should be informed that some drugs can increase the risk of dental caries. They should be encouraged to adapt and reinforce dental hygiene, and advised to visit a dentist regularly.

  9. Dental Sealants Prevent Cavities

    MedlinePlus

    ... Obesity Prescription Drug Overdoses Teen Pregnancy Tobacco Other Digital Media Tools About Vital Signs Get Email Updates To receive email updates about this page, enter your email address: Enter Email Address What's this? Submit What's ... Kit Read the MMWR Science Clips Dental ...

  10. Smoking and dental implants

    PubMed Central

    Kasat, V.; Ladda, R.

    2012-01-01

    Smoking is a prevalent behaviour in the population. The aim of this review is to bring to light the effects of smoking on dental implants. These facts will assist dental professionals when implants are planned in tobacco users. A search of “PubMed” was made with the key words “dental implant,” “nicotine,” “smoking,” “tobacco,” and “osseointegration.” Also, publications on tobacco control by the Government of India were considered. For review, only those articles published from 1988 onward in English language were selected. Smoking has its influence on general as well as oral health of an individual. Tobacco negatively affects the outcome of almost all therapeutic procedures performed in the oral cavity. The failure rate of implant osseointegration is considerably higher among smokers, and maintenance of oral hygiene around the implants and the risk of peri-implantitis are adversely affected by smoking. To increase implant survival in smokers, various protocols have been recommended. Although osseointegrated dental implants have become the state of the art for tooth replacement, they are not without limitations or complications. In this litigious era, it is extremely important that the practitioner clearly understands and is able and willing to convey the spectrum of possible complications and their frequency to the patients. PMID:24478965

  11. FATIGUE OF DENTAL CERAMICS

    PubMed Central

    Zhang, Yu; Sailer, Irena; Lawn, Brian R

    2013-01-01

    Objectives Clinical data on survival rates reveal that all-ceramic dental prostheses are susceptible to fracture from repetitive occlusal loading. The objective of this review is to examine the underlying mechanisms of fatigue in current and future dental ceramics. Data/sources The nature of various fatigue modes is elucidated using fracture test data on ceramic layer specimens from the dental and biomechanics literature. Conclusions Failure modes can change over a lifetime, depending on restoration geometry, loading conditions and material properties. Modes that operate in single-cycle loading may be dominated by alternative modes in multi-cycle loading. While post-mortem examination of failed prostheses can determine the sources of certain fractures, the evolution of these fractures en route to failure remains poorly understood. Whereas it is commonly held that loss of load-bearing capacity of dental ceramics in repetitive loading is attributable to chemically-assisted 'slow crack growth' in the presence of water, we demonstrate the existence of more deleterious fatigue mechanisms, mechanical rather than chemical in nature. Neglecting to account for mechanical fatigue can lead to gross overestimates in predicted survival rates. Clinical significance Strategies for prolonging the clinical lifetimes of ceramic restorations are proposed based on a crack-containment philosophy. PMID:24135295

  12. Advances in dental materials.

    PubMed

    Fleming, Garry J P

    2014-05-01

    The dental market is replete with new resorative materials marketed on the basis of novel technological advances in materials chemistry, bonding capability or reduced operator time and/or technique sensitivity. This paper aims to consider advances in current materials, with an emphasis on their role in supporting contemporary clinical practice.

  13. American Dental Association

    MedlinePlus

    ... Dental Medicine: Balancing Our Compassion for Patients with Social Responsibility April 13, 2-3 p.m. (CT) ASDA DAT Week April 17-21 FACEBOOK LIVE: The Top Three Questions Patients Ask about Fluoride April 18, ... Social ADA Twitter ADA News Twitter ADA Facebook GKAS ...

  14. Clinical canine dental radiography.

    PubMed

    Bannon, Kristin M

    2013-05-01

    The purpose of this article is to provide small animal veterinarians in private practice a guideline for interpretation of the most common findings in canine intraoral radiology. Normal oral and dental anatomy is presented. A brief review of variations of normal, common periodontal and endodontic pathology findings and developmental anomalies is provided.

  15. Dental amalgam and mercury

    SciTech Connect

    Mackert, J.R. Jr. )

    1991-08-01

    This paper looks at the issues of the current amalgam controversy: the daily dose of mercury from amalgam, hypersensitivity to mercury, claims of adverse effects from amalgam mercury and alleged overnight 'cures.' In addition, the toxicity and allergenicity of the proposed alternative materials are examined with the same kind of scrutiny applied by the anti-amalgam group to dental amalgam. 100 references.

  16. Dental Optical Coherence Tomography

    PubMed Central

    Hsieh, Yao-Sheng; Ho, Yi-Ching; Lee, Shyh-Yuan; Chuang, Ching-Cheng; Tsai, Jui-che; Lin, Kun-Feng; Sun, Chia-Wei

    2013-01-01

    This review paper describes the applications of dental optical coherence tomography (OCT) in oral tissue images, caries, periodontal disease and oral cancer. The background of OCT, including basic theory, system setup, light sources, spatial resolution and system limitations, is provided. The comparisons between OCT and other clinical oral diagnostic methods are also discussed. PMID:23857261

  17. Financing Dental Education.

    ERIC Educational Resources Information Center

    Douglass, Chester; Fein, Rashi

    1995-01-01

    Analysis of the current status of and recent trends in dental school finances provides an overall financial description, documents trends in revenue and expenses, discusses student debt and its consequences, and presents alternatives for increasing revenues and decreasing expenses. The paper provides background for an Institute of Medicine study…

  18. Prerequisites in behavioral science and business: opportunities for dental education.

    PubMed

    Dunning, David G; Lange, Brian M; Madden, Robert D; Tacha, Koko K

    2011-01-01

    There is increasing pressure on recent dental school graduates to understand and successfully utilize patient management and business management strategies to run a productive dental office. Dental schools are faced with the dilemma to either add more credit hours in their already crowded curriculum or adjust predental school requirements. All fifty-nine U.S. dental schools were assessed online to determine admission requirements in the areas of behavioral science and business education. Results show that only 11.9 percent of the schools require prerequisite course work in behavioral science and no school requires prerequisite course work in business. However, 64.4 percent and 30.5 percent of schools encouraged or recommended prerequisite course work in behavioral science and business, respectively. We suggest that the dental education community involve key stakeholders to discuss the incorporation of prerequisite course work in behavioral science and business. Additional courses in these disciplines would provide dental students better backgrounds from which the dental curriculum could build a more advanced and applied perspective to better prepare students for practice.

  19. Shear in the zonal drifts of 3 m irregularities inside spread F plumes observed over Sanya

    NASA Astrophysics Data System (ADS)

    Li, Guozhu; Ning, Baiqi; Liu, Libo; Abdu, M. A.; Wan, Weixing; Hu, Lianhuan

    2015-09-01

    Incoherent scatter radars near magnetic equator regularly measured a vertical shear in zonal drifts of the evening background plasma, with westward drifts below the equatorial F region peak and eastward drifts above. We report here observations of a clear shear structure in the zonal drifts of 3 m irregularities inside spread F (SF) backscatter plumes measured with a 47.5 MHz coherent scatter radar operated at a low-latitude site Sanya (18.4°N, 109.6°E; dip latitude 12.8°N). The radar interferometry analysis on the zonal drifts of the 3 m irregularities yields results consistent with that estimated from the irregularity echo Doppler velocity measurements with multiple beams. It is shown that the SF 3 m irregularities move westward at the lowest altitudes, while at higher altitudes in the same SF plume structure, the 3 m irregularities drift eastward. One interesting point is that the vertical shear of zonal drifts was centered at ~300 km altitude over Sanya, which maps to an apex altitude of ~650 km at magnetic equator and is thus apparently higher than the apex altitudes 250-450 km where the zonal velocity shear has usually been observed. Analysis of the observations suggests that while the possibility of local generation of the shear flow of the irregularities can exist, the possibility of a plasma vortex appearing at relative high altitudes causing the zonal drift shear of F region 3 m irregularities measured over Sanya cannot be totally ruled out.

  20. 42 CFR Appendix G to Part 75 - Standards for Licensing Dental Hygienists and Dental Assistants in Dental Radiography

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Standards for Licensing Dental Hygienists and...—Standards for Licensing Dental Hygienists and Dental Assistants in Dental Radiography The following section... personnel who perform radiologic procedures. Currently, Dental Hygienists are credentialed...

  1. Dental anxiety and salivary cortisol levels before urgent dental care.

    PubMed

    Kanegane, Kazue; Penha, Sibele S; Munhoz, Carolina D; Rocha, Rodney G

    2009-12-01

    Dental anxiety is still prevalent, despite advances in treatment, and affects the utilization of health care services. The purpose of this cross-sectional study was to determine if patients with different degrees of dental anxiety and pain undergoing emergency dental care have different stress reactions as measured by salivary cortisol. Seventy three patients completed the modified dental anxiety scale (MDAS), and described any previous dental traumatic experience. Their socio-demographic characteristics were also recorded. They also rated pain intensity on a 100 mm visual analogue scale (VAS). A saliva sample was collected before the procedure, and analyzed by enzyme immunoassay. Thirty patients were dentally anxious and forty one complained of pain. In this sample, dental anxiety was not related to gender, age, educational level and family income; however, a previous traumatic event was related to dental anxiety. There was no association between salivary cortisol concentrations and gender or dental anxiety. Patients with pain showed higher cortisol levels. When gathering patient information, the dentist should note patients' negative dental experiences in order to provide more effective, less traumatic treatment.

  2. Ablation of hard dental tissues with the Er:YAG laser

    NASA Astrophysics Data System (ADS)

    Vickers, Vicki A.; Jacques, Steven L.; Schwartz, Jon A.; Motamedi, Massoud; Rastegar, Sohi; Martin, J. W.

    1992-08-01

    The Er:YAG laser ablation of hard dental tissues and artificial dental stones was studied. The hole depth after ablation was measured as a function of pulse energy and pulse number. The dental gypsum products allowed systematic study of how pulse energy, pulse number, and water content affected ablation. The studies on human teeth compared teeth stored in saline vs teeth stored in formalin.

  3. 21 CFR 872.3240 - Dental bur.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... materials intended for use in the fabrication of dental devices. (b) Classification. Class I (general... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Dental bur. 872.3240 Section 872.3240 Food and... DENTAL DEVICES Prosthetic Devices § 872.3240 Dental bur. (a) Identification. A dental bur is a...

  4. Dental Health - Multiple Languages: MedlinePlus

    MedlinePlus

    ... 繁體中文 (Chinese - Traditional) PDF California Dental Association Dental Tourism English 牙科旅行 - 繁體中文 (Chinese - Traditional) PDF California Dental ... NEEG MOB - Hmoob (Hmong) California Dental Association Dental Tourism English Kev Kho Hniav Txawv Teb Chaws - Hmoob ( ...

  5. Allied Dental Education: Past, Present, and Future.

    ERIC Educational Resources Information Center

    DeVore, Linda Rubinstein

    1993-01-01

    A discussion of the status of the three allied dental disciplines (dental assisting, dental technology, and dental hygiene) gives a historical overview on allied dental programs, assesses their current status and enrollment trends, identifies critical issues affecting educational programs, and outlines a framework for innovation in recruitment and…

  6. Urease and Dental Plaque Microbial Profiles in Children

    PubMed Central

    Morou-Bermudez, Evangelia; Rodriguez, Selena; Bello, Angel S.; Dominguez-Bello, Maria G.

    2015-01-01

    Objective Urease enzymes produced by oral bacteria generate ammonia, which can have a significant impact on the oral ecology and, consequently, on oral health. To evaluate the relationship of urease with dental plaque microbial profiles in children as it relates to dental caries, and to identify the main contributors to this activity. Methods 82 supragingival plaque samples were collected from 44 children at baseline and one year later, as part of a longitudinal study on urease and caries in children. DNA was extracted; the V3–V5 region of the 16S rRNA gene was amplified and sequenced using 454 pyrosequencing. Urease activity was measured using a spectrophotometric assay. Data were analyzed with Qiime. Results Plaque urease activity was significantly associated with the composition of the microbial communities of the dental plaque (Baseline P = 0.027, One Year P = 0.012). The bacterial taxa whose proportion in dental plaque exhibited significant variation by plaque urease levels in both visits were the family Pasteurellaceae (Baseline P<0.001; One Year P = 0.0148), especially Haemophilus parainfluenzae. No association was observed between these bacteria and dental caries. Bacteria in the genus Leptotrichia were negatively associated with urease and positively associated with dental caries (Bonferroni P<0.001). Conclusions Alkali production by urease enzymes primarily from species in the family Pasteurellaceae can be an important ecological determinant in children’s dental plaque. Further studies are needed to establish the role of urease-associated bacteria in the acid/base homeostasis of the dental plaque, and in the development and prediction of dental caries in children. PMID:26418220

  7. Prevalence of Dental Fear and Anxiety amongst Patients in Selected Dental Clinics in Ghana

    ERIC Educational Resources Information Center

    Ofori, Marian A.; Adu-Ababio, F.; Nyako, E. A.; Ndanu, Tom A.

    2009-01-01

    Objective: To find out the prevalence of dental anxiety and fear amongst patients in various selected dental clinics in Accra, Ghana. Study design: Dental patients (n = 279) who had either been exposed to dental treatments or had no prior dental exposure, attending four selected dental clinics in Accra were randomly sampled. They were interviewed…

  8. [Dental education in Germany: new concepts for the dental curriculum].

    PubMed

    Hugger, A; Hugger, S; Kordass, B

    2011-09-01

    In Germany, the dental curriculum is still based on dental licensing regulations ("Approbations-/Prüfungsordnung für Zahnärzte") from 1955. Essential changes of the dental licensing regulations have not been made for over 50 years-unlike the medical licensing regulations in Germany. Teaching and learning concepts have, nevertheless, changed considerably in medical and dental education over time. The present study delivers an analysis about reform initiatives in dental education in Germany and introduces examples of innovative projects. To be able to establish long-term and broad reforms in dental education, new licensing regulations for dentists are required. This should create a contemporary framework for education, which assigns resources and enables occupational profile development at specific locations. Thereby, compatibility with the medical curriculum has to be guaranteed just as required adaptations of admission and curricular capacity regulations for dentistry.

  9. Effective periodontal disease control using dental hygiene chews.

    PubMed

    Brown, Wendy Y; McGenity, Phil

    2005-03-01

    This study evaluated the effectiveness of a newly developed dental hygiene chew for dogs, with and without a natural antimicrobial additive, compared with a reference diet. Efficacy was determined by measuring the severity of gingivitis and the accumulation of dental plaque and calculus in dogs after 4-weeks of being fed the different dietary regimens. Dogs fed a single daily dental chew had significantly less gingivitis (P = 0. 02), plaque (P = 0. 0004), and calculus (P = 0.0001) compared with dogs in the control group that were fed an identical diet but received no chews. The inclusion of the antimicrobial agent did not improve the efficacy of the product. The dental hygiene chews tested in this study have potential to help reduce the incidence of periodontal disease in dogs.

  10. New Parameter for In-Office Dental Bleaching

    PubMed Central

    Bortolatto, Janaina Freitas; de Carvalho, Priscila Petrucelli Freire; Trevisan, Tamara Carolina; Floros, Michael Christopher; Junior, Osmir Batista de Oliveira

    2016-01-01

    Dental bleaching is considered a conservative and biologically safe treatment for discolored teeth. Despite this, one of the major undesirable effects of bleaching is dentin sensitivity which may occur during and after treatment. To address these sensitivity issues, new dental bleaching preparations with lower concentrations of hydrogen peroxide (H2O2) have recently been introduced to the market. This paper presents a clinical case report of a 20-year-old female patient admitted to the Araraquara Dental School, UNESP, Brazil. The patient underwent dental bleaching using one of the new products with reduced hydrogen peroxide concentration, Lase Peroxide Lite 6%, a 6% H2O2 gel containing titanium oxide nanoparticles doped with nitrogen (6% H2O2/N-doped TiO2). PMID:27375906

  11. New Parameter for In-Office Dental Bleaching.

    PubMed

    Presoto, Cristina Dupim; Bortolatto, Janaina Freitas; de Carvalho, Priscila Petrucelli Freire; Trevisan, Tamara Carolina; Floros, Michael Christopher; Junior, Osmir Batista de Oliveira

    2016-01-01

    Dental bleaching is considered a conservative and biologically safe treatment for discolored teeth. Despite this, one of the major undesirable effects of bleaching is dentin sensitivity which may occur during and after treatment. To address these sensitivity issues, new dental bleaching preparations with lower concentrations of hydrogen peroxide (H2O2) have recently been introduced to the market. This paper presents a clinical case report of a 20-year-old female patient admitted to the Araraquara Dental School, UNESP, Brazil. The patient underwent dental bleaching using one of the new products with reduced hydrogen peroxide concentration, Lase Peroxide Lite 6%, a 6% H2O2 gel containing titanium oxide nanoparticles doped with nitrogen (6% H2O2/N-doped TiO2).

  12. Stimulation of high-frequency breakdown of gas in Uragan-3M torsatron by runaway electrons

    NASA Astrophysics Data System (ADS)

    Tarasov, I. K.; Tarasov, M. I.; Sitnikov, D. A.; Pashnev, V. K.; Lytova, M. A.

    2016-01-01

    In experiments on confinement and heating of plasma in the Uragan-3M torsatron, the method of high-frequency breakdown of the working gas is used. In these experiments, in conditions of a relatively stable magnetic field, the rf power supplied to the setup chamber has a frequency close to the ion-cyclotron frequency. Such a method of gas breakdown is not always sufficiently reliable. In our experiments, preliminary ionization of the working gas by the run-away electron beam is used for stabilizing the breakdown. This work contains the results of experiments on enhancement of the runaway electron beam and on the interaction of the runaway electron beam in the Uragan-3M torsatron with the HF electromagnetic pump field. This enables us to formulate a number of recommendations for using spontaneously formed beams of accelerated particles for stimulating the rf breakdown. Our results confirm the possibility of gas breakdown by runaway electrons.

  13. Dental therapists in general dental practices: an economic evaluation.

    PubMed

    Beazoglou, Tryfon J; Lazar, Vickie F; Guay, Albert H; Heffley, Dennis R; Bailit, Howard L

    2012-08-01

    Dental access disparities are well documented and have been recognized as a national problem. Their major cause is the lack of reasonable Medicaid reimbursement rates for the underserved. Specifically, Medicaid reimbursement rates for children average 40 percent below market rates. In addition, most state Medicaid programs do not cover adults. To address these issues, advocates of better oral health for the underserved are considering support for a new allied provider--a dental therapist--capable of providing services at a lower cost per service and in low-income and rural areas. Using a standard economic analysis, this study estimated the potential cost, price, utilization, and dentist's income effects of dental therapists employed in general dental practices. The analysis is based on national general dental practice data and the broadest scope of responsibility for dental therapists that their advocates have advanced, including the ability to provide restorations and extractions to adults and children, training for three years, and minimum supervision. Assuming dental therapists provide restorative, extraction, and pulpal services to patients of all ages and dental hygienists continue to deliver all hygiene services, the mean reduction in a general practice costs ranges between 1.57 and 2.36 percent. For dental therapists treating children only, the range is 0.31 to 0.47 percent. The effects on price and utilization are even smaller. In addition, the effects on most dentists' gross income, hours of work, and net income are negative. The estimated economic impact of dental therapists in the United States on private dental practice is very limited; therefore, the demand for dental therapists by private practices also would probably be very limited.

  14. Dental-service Dental Radiation Safety and Protection: Program guide

    SciTech Connect

    Not Available

    1991-08-27

    The primary purpose of the program guide for Dental Radiation Safety and Protection is to assist VA dental personnel in developing radiologic procedures that ensure maximum safety for their patients and themselves. In order to do this, the authors have included a summary of the biological hazards associated with exposure to x-radiation, provided information on patient exposure levels associated with dental X-ray units, and explained the methods for reducing patient and staff exposure to X-rays.

  15. Florida hospital saves 5.3 M dollars by adopting principles of lean manufacturing.

    PubMed

    2005-01-01

    Florida hospital saves 5.3M dollars by adopting principles of lean manufacturing. Surgery cancellations have been slashed from 13% of cases to less than 3%, while emergency department admissions have increased by 20%. Those are just two of the results of a quality improvement project at Lee Memorial Health System in Fort Myers, FL, that focused on using the principles of lean manufacturing to improve patient flow in the five-hospital system

  16. A 3 m. y. record of Pliocene-Pleistocene loess in interior Alaska

    SciTech Connect

    Westgate, J.A.; Stemper, B.A. ); Pewe, T.L. )

    1990-09-01

    Many distal tephra beds exist in the thick, fossiliferous loess deposits near Fairbanks interior Alaska. Isothermal plateau fission-track ages, determined on glass shards from tephra beds, in conjunction with tephrostratigraphic and magnetostratigraphic techniques, indicate that loess deposition began in the late Pliocene-an antiquity previously unsuspected. Hence, there is the opportunity now to reconstruct a detailed, well-dated record of environmental changes in interior Alaska during the past 3 m.y.

  17. Ultra Barrier Topsheet Film for Flexible Photovoltaics with 3M Company

    SciTech Connect

    Funkenbusch, Arnie; Ruth, Charles

    2014-12-30

    In this DOE sponsored program, 3M achieved the critical UBT features to enable durable flexible high efficiency modules to be produced by a range of customers who have now certified the 3M UBT and are actively developing said flexible modules. The specific objectives and accomplishments of the work under this program were; Scale-up the current Generation-1 UBT from 12” width, as made on 3M’s pilot line, to 1+meter width full-scale manufacturing, while maintaining baseline performance metrics (see table below); This objective was fully met; Validate service life of Generation-1 UBT for the 25+ year lifetime demanded by the photovoltaic market; Aggressive testing revealed potential failure modes in the Gen 1 UBT. Deficiencies were identified and corrective action taken in the Gen 2 UBT; Develop a Generation-2 UBT on the pilot line, targeting improved performance relative to baseline, including higher %T (percent transmission), lower water vapor transmission rate (WVTR) with targets based on what the technology needs for 25 year lifetime, proven lifetime of 25 years in solar module construction in the field, and lower cost; Testing of UBT Gen 2 under a wide range of conditions presented in this report failed to reveal any failure mode. Therefore UBT Gen 2 is known to be highly durable. 3M will continue to test towards statistically validating a 25 year lifetime under 3M funding; Transfer Generation-2 UBT from the pilot line to the full-scale manufacturing line within three years; and This objective was fully met.

  18. Fundamental experiments of radio astronomy by the paraboloidal antenna of 3.3 m diameter.

    NASA Astrophysics Data System (ADS)

    Sato, K.; Kuji, S.; Hara, T.; Fujishita, M.; Horiai, K.; Iwadate, K.; Sato, K.; Tsubokawa, T.; Tamura, Y.; Takano, S.; Tsuruta, S.; Asari, K.

    The 3.3 m diameter paraboloidal antenna was moved at early 1985 for fundamental experiments of radio astronomy at the International Latitude Observatory of Mizusawa. The antenna was originally manufactured for the telecomunication experiments at 4 GHz. The authors fitted up a new feed horn of 8 GHz-band for their experiments. The driving system was renewed as suitable for astronomical use by using DC servomotors, optical encoders and a micro-computer.

  19. Analysis of the Cyclotron Facility Calibration and Aircraft Results Obtained by LIULIN-3M Instrument

    NASA Technical Reports Server (NTRS)

    Dachev, T. P.; Stassinopoulos, E. G.; Tomov, B. T.; Dimitrov, P. G.; Matviichuk, Y. N.; Shurshakov, V. A.; Petrov, V. M.

    1998-01-01

    The LIULIN-3M instrument is a further development of the LIULIN dosimeter-radiometer, which has been used on the NffR space station in the 1988-1994 time period, The LIULIN-3M is designed for continuous monitoring of the radiation environment during the BION-12 satellite flight in 1999. A semiconductor detector with 1 mm thickness and 1 cm(exp 2) area is used in the instrument. Pulse high analysis technique is used for measurement of the energy losses in the detector. The final data sets from the instrument are the flux and the dose rate for the exposition time and 256 channels of LET spectra if a non-nal coincidence of the particles to the detector is considered. The LIULIN-3M instrument was calibrated by proton fluxes with different energies at the Indiana University Cyclotron Facility in June 1997 and was used for space radiation measurements during commercial aircraft flights. Obtained calibration and flight results are analyzed in the paper.

  20. Bisphenol A and Related Compounds in Dental Materials

    PubMed Central

    Fleisch, Abby F.; Sheffield, Perry E.; Chinn, Courtney; Edelstein, Burton L.; Landrigan, Philip J.

    2014-01-01

    CONTEXT Dental sealants and composite filling materials containing bisphenol A (BPA) derivatives are increasingly used in childhood dentistry. Evidence is accumulating that BPA and some BPA derivatives can pose health risks attributable to their endocrine-disrupting, estrogenic properties. OBJECTIVES To systematically compile and critically evaluate the literature characterizing BPA content of dental materials; to assess BPA exposures from dental materials and potential health risks; and to develop evidence-based guidance for reducing BPA exposures while promoting oral health. METHODS The extant toxicological literature and material safety data sheets were used as data sources. RESULTS BPA is released from dental resins through salivary enzymatic hydrolysis of BPA derivatives, and BPA is detectable in saliva for up to 3 hours after resin placement. The quantity and duration of systemic BPA absorption is not clear from the available data. Dental products containing the bisphenol A derivative glycidyl dimethacrylate (bis-GMA) are less likely to be hydrolyzed to BPA and have less estrogenicity than those containing bisphenol A dimethacrylate (bis-DMA). Most other BPA derivatives used in dental materials have not been evaluated for estrogenicity. BPA exposure can be reduced by cleaning and rinsing surfaces of sealants and composites immediately after placement. CONCLUSIONS On the basis of the proven benefits of resin-based dental materials and the brevity of BPA exposure, we recommend continued use with strict adherence to precautionary application techniques. Use of these materials should be minimized during pregnancy whenever possible. Manufacturers should be required to report complete information on the chemical composition of dental products and encouraged to develop materials with less estrogenic potential. PMID:20819896

  1. [Dental orthopedic service for retirees from MD RF in medical institutions of state and municipal system of healthcare].

    PubMed

    Malykh, A B; Grebnev, G A; Butsenko, S A; Pastukhov, A G

    2012-04-01

    Financial feasibility study of dental orthopedic service for retirees of Ministry of Defence is analyzed, suggestions about the organization of dental orthopedic service for contingent in medical institution of state and municipal system of healthcare. Information about the number of retirees, index of needs in dental orthopedic service which was 40,29%, information about 2806 prosthodontics oders for retirees in military medical institution, data about the average price of production of dental in different subjects of Russian Federation is the basis of the given research. Algorithm of dental orthopedic service for retirees by stomatologies is suggested.

  2. [Phenomenon of dental fear].

    PubMed

    Moore, R; Birn, H

    1990-01-01

    Odontophobia is a rather unique phobia with special psychosomatic components that impact on the dental health of odontophobic persons. It also has psychosocial components largely as a result of destruction of the teeth and subsequent embarrassment that can affect a person and cause a vicious cycle of dental fear. The phenomenon is facilitated by misunderstandings and myths generated by both patients and dentists. The most common reasons given in the literature for such strong fears of dental treatment are: 1) bad experiences in childhood for 85% of cases, 2) feeling of powerlessness and lack of control over personal emotional reactions and over the social situation in the dental chair, 3) social learning processes in which the image of the dentist is cast in a negative light by the mass media or by the person's relatives or friends and 4) that the person has other psychologic problems (in 20% of cases), such as serious phobias and/or neuroses. A strategy of researching and thus tackling the problem is presented which focuses on three essential targets that require studying and change: 1) the community at large and their image of the dentist, 2) the patient role and 3) the dentist role. Various model projects are presented along with their diagnostic systems. These are seen to focus in varying degrees on different elements of the target groups that effect the dentist-patient relationship but the need to come out into the community and make the social environment right for these patients is an important factor in all strategies.(ABSTRACT TRUNCATED AT 250 WORDS)

  3. Syllabus of Dental Materials

    DTIC Science & Technology

    1984-07-01

    or orthodontic bands. When a cold mixing slab (7 to 210 C) is used, more powder will be incorporated into the liquid and the set of the cement...over the mechanism of action of eugenol upon the dental pulp . Brannstrom and Nyborg (8) have demonstrated that eugenol may have little direct...AND LINERS--WOOLSEY 35 pulp , but may actually kill bacteria in the dentinal tubules and eliminate the source of pulpal irritation which renders the

  4. Dental Assisting Education in California.

    ERIC Educational Resources Information Center

    California State Dept. of Education, Sacramento. Bureau of Industrial Education.

    A survey of 22 dental assisting programs showed an average of 1,124 hours of instruction in dental assisting for 15 four-semester, 955 for three three-semester, and 1,042 for four two-semester programs. The average instructional hours for the four-semester programs were 48 in introduction to dental assisting, 179 in the life sciences, 221 in the…

  5. Effects of 2-deoxy D-glucose and other sugar analogues on acid production from sugars by human dental plaque bacteria.

    PubMed

    Roberts, K R; Hayes, M L

    1980-06-01

    Solutions (10-25 microM) of D-glucose, N-acetyl-D-glucosamine, D-fructose, sucrose, maltose, lactose and maltotriose were readily metabolised to acid (140-250 mumol H+ wet g-1h-1) by anaerobic suspensions of fresh plaque at pH 7.5. D-Mannose, D-galactose, D-glucosamine and trehalose were broken down more slowly (35-115 mumol H+ wet g-1h-1). Inhibition of this acid production occurred on adding excess amounts of 2-deoxy-D-glucose or 5-thio-D-glucose. Similarly, excess amounts of cellobiose specifically inhibited acid liberation from lactose. No acid production was detected from a number of other sugars and sugar derivatives, some of which may be useful sucrose substitutes.

  6. Validation of the 3M molecular detection system for the detection of listeria in meat, seafood, dairy, and retail environments.

    PubMed

    Fortes, Esther D; David, John; Koeritzer, Bob; Wiedmann, Martin

    2013-05-01

    There is a continued need to develop improved rapid methods for detection of foodborne pathogens. The aim of this project was to evaluate the 3M Molecular Detection System (3M MDS), which uses isothermal DNA amplification, and the 3M Molecular Detection Assay Listeria using environmental samples obtained from retail delicatessens and meat, seafood, and dairy processing plants. Environmental sponge samples were tested for Listeria with the 3M MDS after 22 and 48 h of enrichment in 3M Modified Listeria Recovery Broth (3M mLRB); enrichments were also used for cultural detection of Listeria spp. Among 391 samples tested for Listeria, 74 were positive by both the 3M MDS and the cultural method, 310 were negative by both methods, 2 were positive by the 3M MDS and negative by the cultural method, and one sample was negative by the 3M MDS and positive by the cultural method. Four samples were removed from the sample set, prior to statistical analyses, due to potential cross-contamination during testing. Listeria isolates from positive samples represented L. monocytogenes, L. innocua, L. welshimeri, and L. seeligeri. Overall, the 3M MDS and culture-based detection after enrichment in 3M mLRB did not differ significantly (P < 0.05) with regard to the number of positive samples, when chi-square analyses were performed for (i) number of positive samples after 22 h, (ii) number of positive samples after 48 h, and (iii) number of positive samples after 22 and/or 48 h of enrichment in 3M mLRB. Among 288 sampling sites that were tested with duplicate sponges, 67 each tested positive with the 3M MDS and the traditional U.S. Food and Drug Administration Bacteriological Analytical Manual method, further supporting that the 3M MDS performs equivalently to traditional methods when used with environmental sponge samples.

  7. Stability of dental waxes following repeated heatings.

    PubMed

    Kotsiomiti, E; McCabe, J F

    1995-02-01

    The flow and strength properties of dental waxes were examined following excessive and repeated heatings of the materials. For one product, the flow at 40 +/- 0.5 degrees C was reduced by 25.3% following heating above 200 degrees C. A decrease of the elastic modulus at 20 +/- 1 degree C by approximately 66% was observed in some cases after the heating temperature had been increased to 300 degrees C. Property variations were related to compositional changes, which were investigated by infrared spectoscopy and thermal analysis. Exposure of dental waxes to temperatures higher than 200 degrees C, particularly if it is repeated, may affect the composition and properties, resulting in inferior materials.

  8. Pulmonary Foreign Body Granulomatosis in Dental Technician.

    PubMed

    Chung, Sung Jun; Koo, Gun Woo; Park, Dong Won; Kwak, Hyun Jung; Yhi, Ji Young; Moon, Ji-Yong; Kim, Sang-Heon; Sohn, Jang Won; Yoon, Ho Joo; Shin, Dong Ho; Park, Sung Soo; Pyo, Ju Yeon; Oh, Young-Ha; Kim, Tae-Hyung

    2015-10-01

    Occupational lung diseases are caused by several toxic substances including heavy metals; however, the exact pathologic mechanisms remain unknown. In the workplace, dental technicians are often exposed to heavy metals such as cobalt, nickel, or beryllium and occasionally develop occupational lung diseases. We described a case of occupational lung disease in a patient who was employed as a dental technician for over a decade. A 31-year-old, non-smoking woman presented with productive cough and shortness of breath of several weeks duration. Chest computed tomography revealed a large number of scattered, bilateral small pulmonary nodules throughout the lung field, and multiple mediastinal lymph nodes enlargement. Percutaneous needle biopsy showed multifocal small granulomas with foreign body type giant cells suggestive of heavy metals inhalation. The patient's condition improved on simple avoidance strategy for several months. This case highlighted the importance of proper workplace safety.

  9. Dental material artifacts on MR images.

    PubMed

    Hinshaw, D B; Holshouser, B A; Engstrom, H I; Tjan, A H; Christiansen, E L; Catelli, W F

    1988-03-01

    Magnetic resonance (MR) imaging of the head and neck is becoming an important aid in evaluating pathologic conditions of the brain, midface, and pharynx. Certain dental materials cause artifacts during MR imaging of the lower midface. These artifacts can obscure the normal anatomy. This study describes the degree of artifact production caused by various materials commonly used in dental restorations. Of the materials tested, those causing artifacts were made of stainless steel, such as orthodontic bands used for braces, and pins or posts that are commonly drilled into teeth to provide structure or stability before filling. Materials used as temporary or permanent fillings or crowns--such as amalgam, gold alloy, aluminum, microfilled resin, and polyvinyl acrylics--did not cause artifacts in the images.

  10. Allied dental personnel: will there be enough?

    PubMed

    Waldman, H Barry; Perlman, Steven P

    2008-11-01

    The escalating number and size of dental practices mean greater dependency on a ready supply of allied dental personnel. However, despite the increasing number of entry places in allied dental training programs, many places remain unfilled and large numbers of individuals do not complete the course of studies. A review of the changes in dental practice sizes and dental assistant, dental hygienist and dental laboratory technician programs raises concerns as to whether there will be enough allied dental personnel to meet the future needs of the profession. The need for increasing attention to this potential eventuality is stressed.

  11. The holistic 3M modality of drug delivery nanosystems for cancer therapy

    NASA Astrophysics Data System (ADS)

    Sun, Jin; Luo, Cong; Wang, Yongjun; He, Zhonggui

    2013-01-01

    Cancer has become the leading cause of human death worldwide. There are many challenges in the treatment of cancer and the rapidly developing area of nanotechnology has shown great potential to open a new era in cancer therapy. This article, rather than being exhaustive, focuses on the striking progress in the drug delivery nanosystems (DDNS) for cancer therapy and selects typical examples to point out the emerging mode of action of DDNS from our perspective. Among the outstanding advances in DDNS for cancer therapy is the development of ``multicomponent delivery systems'', ``multifunctional nanocarriers'' and ``multistage delivery systems''. However, these represent only one aspect of DDNS research. In addition, nature is the best teacher and natural evolution pressure has meant that virions conform to the ``multitarget, multistage and multicomponent'' (3M) mode of action. Amazingly, traditional Chinese medicine (TCM), used for over 4000 years in China, also displays the same mode of action. Integrating the previous notable progress in nanoparticle technology, learned from the building mode of natural virions and the action concept of TCM, we propose an integrity-based 3M mode DDNS for cancer therapy: multitarget, multistage and multicomponent, which are not fragmented parts but an interconnected integrity. Based on the physiological multitarget and the pharmacokinetic multistage, multicomponent DDNS are rationally designed, where different components with individual specific functions act in a synergistic manner against each target at each disposition stage to maximize the targeted delivery effectiveness. In this article, we introduce each component of 3M DDNS in detail and describe some typical cases to realize the tumor-homing purposes.

  12. Natural rubber latex allergy and dental practice.

    PubMed

    Desai, Shalin V

    2007-12-01

    Natural rubber latex (NRL) allergy is a significant clinical problem with potentially life-threatening complications. Oral health care professionals must be able to screen for NRL allergy and refer patients or staff to a specialist for definitive diagnosis. Protocol for its management must be developed and incorporated into daily practice. Practitioners must be able to recognize and treat NRL exposure emergencies. Knowledge of the availability of substitute products and an adequate fresh stock of such products in dental practice can minimise the risk of adverse NRL sensitivity.

  13. Unique Roll-Off Roof for Housing 1.3 m Telescope at Devasthal, Nainital

    NASA Astrophysics Data System (ADS)

    Bangia, Tarun

    2016-05-01

    Aryabhatta Research Institute of Observational Sciences (ARIES) had set up a 1.3 m telescope at Devasthal, Nainital, India in the year 2010. Country's largest roll-off roof was indigenously designed, fabricated and installed on top of a building (17 × 8 m) for housing 1.3 m telescope. Telescope was supplied by M/s DFM Engineering Inc., USA to ARIES and was installed in the building with unique roll-off roof to protect it from external environment. Roll-off roof was designed and fabricated considering various parameters and available manpower and resources at ARIES. This paper presents mechanical development work, simple but distinct design approach and innovative selection of materials to economically manufacture roll-off roof of large size (8 × 8 × 4 m) at hilly remote site of Devasthal situated in Central Himalayan region. All operations in the roof viz. opening of shutters and rolling of roof were motorized to facilitate observers during night observations.

  14. Differential targeting of VDAC3 mRNA isoforms influences mitochondria morphology.

    PubMed

    Michaud, Morgane; Ubrig, Elodie; Filleur, Sophie; Erhardt, Mathieu; Ephritikhine, Geneviève; Maréchal-Drouard, Laurence; Duchêne, Anne-Marie

    2014-06-17

    Intracellular targeting of mRNAs has recently emerged as a prevalent mechanism to control protein localization. For mitochondria, a cotranslational model of protein import is now proposed in parallel to the conventional posttranslational model, and mitochondrial targeting of mRNAs has been demonstrated in various organisms. Voltage-dependent anion channels (VDACs) are the most abundant proteins in the outer mitochondrial membrane and the major transport pathway for numerous metabolites. Four nucleus-encoded VDACs have been identified in Arabidopsis thaliana. Alternative cleavage and polyadenylation generate two VDAC3 mRNA isoforms differing by their 3' UTR. By using quantitative RT-PCR and in vivo mRNA visualization approaches, the two mRNA variants were shown differentially associated with mitochondria. The longest mRNA presents a 3' extension named alternative UTR (aUTR) that is necessary and sufficient to target VDAC3 mRNA to the mitochondrial surface. Moreover, aUTR is sufficient for the mitochondrial targeting of a reporter transcript, and can be used as a tool to target an unrelated mRNA to the mitochondrial surface. Finally, VDAC3-aUTR mRNA variant impacts mitochondria morphology and size, demonstrating the role of mRNA targeting in mitochondria biogenesis.

  15. Finishing of display glass for mobile electronics using 3M Trizact diamond tile abrasive pads

    NASA Astrophysics Data System (ADS)

    Zheng, Lianbin; Fletcher, Tim; Na, Tee Koon; Sventek, Bruce; Romero, Vince; Lugg, Paul S.; Kim, Don

    2010-10-01

    This paper will describe a new method being used during the finishing of glass displays for mobile electronics including mobile hand held devices and notebook computers. The new method consists of using 3M TrizactTM Diamond Tile Abrasive Pads. TrizactTM Diamond Tile is a structured fixed abrasive grinding technology developed by 3M Company. The TrizactTM Diamond Tile structured abrasive pad consists of an organic (polymeric binder) - inorganic (abrasive mineral, i.e., diamond) composite that is used with a water-based coolant. TrizactTM Diamond Tile technology can be applied in both double and single side grinding applications. A unique advantage of TrizactTM Diamond Tile technology is the combination of high stock removal and low sub-surface damage. Grinding results will be presented for both 9 micron and 20 micron grades of TrizactTM Diamond Tile abrasive pads used to finish several common display glasses including Corning GorillaTM glass and Soda Lime glass.

  16. [11'-Deoxyverticillin A induces caspase-dependent cell apoptosis in PC3M cells].

    PubMed

    Shi, Yingdi; Zhang, Yingqiu; Ni, Yangxiao; Shi, Guoli; Yang, Huaiyi

    2012-01-01

    Recent years, the incidence and mortality of prostate cancer have increased dramatically in China. At earlier stages, most diagnosed prostate cancers are responsive to androgen depletion treatment, yet, nearly all patients will eventually progress to metastatic androgen-independent prostate cancer (AIPC), which still has no effective therapeutic method or drug to deal with. 11'-Deoxyverticillin A (C42) belongs to the family of epipolythiodioxopiperazines (ETPs), an interesting class of fungal toxins that inhibit farnesyl transferase. Compounds holding such a property have been explored as putative anticancer agents. In this study, using PC3M cells, an AIPC cell line, we investigated the effect of the compound on apoptosis and explored the underlying mechanism. It revealed that C42 markedly enhanced the activity of caspase-3/7 and increased the accumulation of the cleaved PARP, all of which are the markers of apoptosis. It also revealed that C42 either decreased cell viability or inhibited the growth of PC3M cells. Moreover, we observed that the loss of cell viability and cell growth inhibition induced by C42 were both time- and dosage dependent. Taken together, we indicated that C42 can induce caspase-dependent apoptosis in AIPC cells, and the results presented here will broaden our knowledge about the molecular mechanisms by which C42 exerts its anticancer activity, and future work in this direction may provide valuable information in the development of these compounds into effective cancer therapeutic strategies against androgen-independent prostate cancer.

  17. Competency in Allied Dental Education.

    ERIC Educational Resources Information Center

    Beemsterboer, P. L.

    1994-01-01

    Implications of competency-based education for dental assistants and hygienists are examined. Such an approach would provide assistance in defining evolving roles in delivery of dental care; help in defining national competencies and analyzing appropriateness of current care; and a mechanism for developing curriculum that responds to community…

  18. Dental Assisting Competencies. Final Report.

    ERIC Educational Resources Information Center

    Richards, Beverly; And Others

    This document contains dental assisting competencies and competency-based performance objectives, learning activities, resources, and evaluation procedures for each competency that was adapted and developed by instructors of dental assisting to suit the needs and legal parameters of Pennsylvania. The competencies and associated elements are…

  19. Clinical Guidelines. Dental Hygiene Program.

    ERIC Educational Resources Information Center

    Branson, Bonnie

    This manual contains information concerning the policies and procedures of the Southern Illinois University-Carbondale Dental Hygiene Clinic. The manual is presented in a question/answer format for the information and convenience of dental hygiene students in the program, and is intended to answer their questions concerning clinical policies and…

  20. Medical screenings in dental settings.

    PubMed

    Bowen, Denise M

    2012-01-01

    The purpose of Linking Research to Clinical Practice is to present evidence based information to clinical dental hygienists so that they can make informed decisions regarding patient treatment and recommendations. Each issue will feature a different topic area of importance to clinical dental hygienists with A BOTTOM LINE to translate the research findings into clinical application.

  1. Dentistry and Dental Hygiene Handbook.

    ERIC Educational Resources Information Center

    New York State Education Dept., Albany. Office of the Professions.

    A reference guide to laws, rules, and regulations that govern dentistry and dental hygiene practice in New York State is presented. In addition to identifying licensing requirements/procedures for dentists and dental hygienists, general provisions of Title VIII of the Education Law are covered, along with state management, professional misconduct,…

  2. Dentistry and Dental Hygiene Handbook.

    ERIC Educational Resources Information Center

    New York State Education Dept., Albany. Office of the Professions.

    The handbook contains laws, rules, and regulations of the New York State Education Department that govern dentistry and dental hygiene practice in the state. It describes licensure requirements and includes complete application forms and instructions for obtaining license and first registration as a dentist and dental hygienist. Applicants are…

  3. Music interventions for dental anxiety.

    PubMed

    Bradt, J; Teague, A

    2016-11-25

    Anxiety is a significant issue in the dental care of adults and children. Dental anxiety often leads to avoidance of dental care which may result in significant deterioration of oral and dental health. Non-pharmacological anxiety management interventions such as music listening are increasingly used in dental care. Although efficacy for music's anxiolytic effects has been established for pre-operative anxiety, findings regarding the use of music listening for dental anxiety are inconclusive, especially for children. The use of music for passive distraction may not be adequate for children and highly anxious adults. Instead, interventions offered by a trained music therapist may be needed to optimize music's anxiolytic impact. Music therapy interventions are individualized to the patient's presenting needs and geared at enhancing patients' active engagement in the management of their anxiety. Interventions may include (i) active refocusing of attention, (ii) music-guided deep breathing, (iii) music-assisted relaxation, and (iv) music-guided imagery. In addition, music therapists can teach patients music-based anxiety management skills prior to dental treatments, offer them the opportunity to express emotions related to the upcoming procedure, and help them gain a sense of control and safety. Clinical guidelines for the use of music listening by dental practitioners are offered.

  4. Dental Laboratory Technology Program Guide.

    ERIC Educational Resources Information Center

    Georgia Univ., Athens. Dept. of Vocational Education.

    This program guide contains the standard dental laboratory technology curriculum for both diploma programs and associate degree programs in technical institutes in Georgia. The curriculum encompasses the minimum competencies required for entry-level workers in the dental laboratory technology field. The general information section contains the…

  5. Dental problems in epileptic patients.

    PubMed

    Zioło, Anna; Mielnik-Błaszczak, Maria

    2004-01-01

    On the grounds of literature and own clinical experience, pathological changes in epilepitic patients have been described. Dental management procedures in these patients have also been presented. The unquestionable importance of prophylaxis, which may markedly minimize the impact of epilepsy on the incidence of mouth diseases, has been emphasised. It has also been stated that epileptic patients should receive specialised and integrated dental treatment.

  6. Dosimetric considerations in dental applications

    NASA Technical Reports Server (NTRS)

    Goble, J. C.

    1978-01-01

    The integration of the Lixiscope into dental procedures was studied and compared with conventional dental radiographic techniques. It was found that through the use of intraoral sealed sources in conjunction with microchannel plate technology, the Lixiscope gives increased diagnostic information with decreased radiation dosage.

  7. Dental Chairside Technique. Student's Manual.

    ERIC Educational Resources Information Center

    Apfel, Maura; Weaver, Trudy Karlene

    This manual is part of a series dealing with skills and information needed by students in dental assisting. The individualized student materials are suitable for classroom, laboratory, or cooperative training programs. This student manual contains four units covering the following topics: local anesthesia; dental office emergencies; oral hygiene;…

  8. Chemical intensification of dental radiographs

    SciTech Connect

    Price, C.

    1983-04-01

    The potential applications of chemical intensification in dental radiography are explored. Three standard photographic intensifiers and three methods designed for radiographic use are evaluated. One of these methods is shown to be capable of reducing radiation dose to one half, without loss of diagnostic quality. Further work is necessary to achieve a system sufficiently practicable to deserve widespread use in routine clinical dental radiography.

  9. Health Instruction Packages: Dental Assisting.

    ERIC Educational Resources Information Center

    McEnery, Paula

    Text, illustrations, and exercises are utilized in this set of four learning modules to instruct dental assisting students in various office skills. The first module, "Dental Office Telephone Techniques," examines the qualities of a good telephone voice and demeanor and provides guidelines for taking a message and handling various…

  10. Nanotechnology for dental implants.

    PubMed

    Tomsia, Antoni P; Lee, Janice S; Wegst, Ulrike G K; Saiz, Eduardo

    2013-01-01

    With the advent of nanotechnology, an opportunity exists for the engineering of new dental implant materials. Metallic dental implants have been successfully used for decades, but they have shortcomings related to osseointegration and mechanical properties that do not match those of bone. Absent the development of an entirely new class of materials, faster osseointegration of currently available dental implants can be accomplished by various surface modifications. To date, there is no consensus regarding the preferred method(s) of implant surface modification, and further development will be required before the ideal implant surface can be created, let alone become available for clinical use. Current approaches can generally be categorized into three areas: ceramic coatings, surface functionalization, and patterning on the micro- to nanoscale. The distinctions among these are imprecise, as some or all of these approaches can be combined to improve in vivo implant performance. These surface improvements have resulted in durable implants with a high percentage of success and long-term function. Nanotechnology has provided another set of opportunities for the manipulation of implant surfaces in its capacity to mimic the surface topography formed by extracellular matrix components of natural tissue. The possibilities introduced by nanotechnology now permit the tailoring of implant chemistry and structure with an unprecedented degree of control. For the first time, tools are available that can be used to manipulate the physicochemical environment and monitor key cellular events at the molecular level. These new tools and capabilities will result in faster bone formation, reduced healing time, and rapid recovery to function.

  11. 29 CFR 516.27 - “Board, lodging, or other facilities” under section 3(m) of the Act.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 29 Labor 3 2011-07-01 2011-07-01 false âBoard, lodging, or other facilitiesâ under section 3(m) of...” under section 3(m) of the Act. (a) In addition to keeping other records required by this part, an... these terms are used in sec. 3(m) of the Act) furnished to them by the employer or by an...

  12. 29 CFR 516.27 - “Board, lodging, or other facilities” under section 3(m) of the Act.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 3 2010-07-01 2010-07-01 false âBoard, lodging, or other facilitiesâ under section 3(m) of...” under section 3(m) of the Act. (a) In addition to keeping other records required by this part, an... these terms are used in sec. 3(m) of the Act) furnished to them by the employer or by an...

  13. Current trends in dental implants

    PubMed Central

    Gaviria, Laura; Salcido, John Paul; Guda, Teja

    2014-01-01

    Tooth loss is very a very common problem; therefore, the use of dental implants is also a common practice. Although research on dental implant designs, materials and techniques has increased in the past few years and is expected to expand in the future, there is still a lot of work involved in the use of better biomaterials, implant design, surface modification and functionalization of surfaces to improve the long-term outcomes of the treatment. This paper provides a brief history and evolution of dental implants. It also describes the types of implants that have been developed, and the parameters that are presently used in the design of dental implants. Finally, it describes the trends that are employed to improve dental implant surfaces, and current technologies used for the analysis and design of the implants. PMID:24868501

  14. Biostatistical consultation for dental research.

    PubMed

    Clive, Jonathan

    2002-01-01

    Dental science researchers do not really need a detailed, ready-at-hand knowledge of statistics to design and perform high quality scientific research. Although the acquisition and utilization of such knowledge by dental researchers is not discouraged, it is proposed that it is more important for dental researchers to be committed to developing and maintaining a long term, ongoing, interactive consulting relationship with a biostatistician. The nature of this relationship will depend in large part on the complexity of the dental research being conducted. While the statistical consultant will assist in interpreting analytic results for the dental researcher, the latter will need to provide extensive input in assisting in the estimation of sample size and power, and for expressing scientific hypotheses in statistical terms so that the appropriate data analytic methodology can be specified.

  15. The american dental dream.

    PubMed

    Hodges, Nathan

    2015-01-01

    The American Dental Dream-the cultural desire for straight, white teeth-is difficult, if not impossible, for poor and working-class people to achieve. Using ethnographic fiction, autoethnography, poetry, and qualitative interviewing, I brush away the taken-for-granted assumptions about teeth. I explore the personal, relational, and structural consequences of this cultural desire, and show how social class writes itself on our bodies. I write these culture-centered teeth tales to show how one might cope with their teeth.

  16. Lasers In Dental Diagnosis

    NASA Astrophysics Data System (ADS)

    Everse, K. E.; Sinor, T. W.; Menzel, E. R.

    1987-01-01

    We have investigated the potential of lasers for real time in situ dental diagnosis via transillumination of teeth and gums and via fluorescence. Not surprisingly, absorption and/or scattering of light by teeth was found to be insensitive to light color. However, monochromatic transillumination revealed detail better than white light. Transillumination of gums was best performed with orange-red light because of tissue absorption. Illumination of oral structures by 488 nm Ar-laser light was effective in revealing diagnosis detail by fluorescence. Incipient caries and fine tooth fracture lines that are generally not revealed by radiography were observable by laser.

  17. Dental, Dental Hygiene, and Graduate Students' and Faculty Perspectives on Dental Hygienists' Professional Role and the Potential Contribution of a Peer Teaching Program.

    PubMed

    McComas, Martha J; Inglehart, Marita R

    2016-09-01

    The changing role of dental hygienists deserves dental and dental hygiene educators' attention. The first aim of this survey study was to assess University of Michigan dental, dental hygiene, and graduate students' and faculty members' perceptions of dental hygienists' roles; their attitudes and behaviors related to clinical interactions between dental and dental hygiene students; and perceived benefits of engaging dental hygiene students as peer teachers for dental students. The second aim was to assess whether one group of dental students' experiences with dental hygiene student peer teaching affected their perceptions of the dental hygiene profession. Survey respondents were 57 dental hygiene students in all three years of the program (response rate 60% to 100%); 476 dental students in all four years (response rate 56% to 100%); 28 dental and dental hygiene graduate students (response rate 28%); and 67 dental and dental hygiene faculty members (response rate 56%). Compared to the other groups, dental students reported the lowest average number of services dental hygienists can provide (p≤0.001) and the lowest average number of patient groups for which dental hygienists can provide periodontal care (p<0.001). Dental students also had the least positive attitudes about clinical interactions between dental hygiene and dental students (p<0.001) and perceived the fewest benefits of dental hygiene student peer teaching (p<0.001) before experiencing peer teaching. After experiencing dental hygiene student peer teaching, the dental students' perceptions of dental hygienists' roles, attitudes about clinical interactions with dental hygienists, and perceived benefits of dental hygiene student peer teachers improved and were more positive than the responses of their peers with no peer teaching experiences. These results suggest that dental hygiene student peer teaching may improve dental students' perceptions of dental hygienists' roles and attitudes about

  18. [Dental practice in the camps of the Third Reich].

    PubMed

    Riaud, Xavier

    2003-01-01

    In the Concentration Camps, the Nazis made a mixing of National Socialism ideology, anti-Semitism and war effort. After the arrival of trains in the camps the Nazis selected the weakest inmates for the gas chambers, as far as they considered them to be "useless mouths". The heathly grownups were kept for productive use. However a person suffering from bad tooth was not profitable. Thus some inmate dentists were in position to give dental cares to a few prisoners as they had been allowed by the Nazis to work in precarious circumstances. On the 23rd of September 1940 Himmler ordered to pull out the dental gold from the alive prisoners or at their exit of gas chambers. The decree was reinforced on the 23rd December 1942. The product of gold became a mean to support war effort. On the other hand few dental experiments have been performed by the SS doctors.

  19. Test of P3M-1 nacelle in Full-Scale Tunnel (FST)

    NASA Technical Reports Server (NTRS)

    1931-01-01

    Test of P3M-1 nacelle in Full-Scale Tunnel (FST). The NACA conducted drag tests on P3M-1 nacelle in 1931 which were presented in a special report to the Navy. Smith DeFrance described this work in the report's introduction: 'Tests were conducted in the full-scale wind tunnel on a five to four geared Pratt and Whitney Wasp engine mounted in a P3M-1 nacelle. In order to simulate the flight conditions the nacelle was assembled on a 15-foot span of wing from the same airplane. The purpose of the tests was to improve the cooling of the engine and to reduce the drag of the nacelle combination. Thermocouples were installed at various points on the cylinders and temperature readings were obtained from these by the power plants division. These results will be reported in a memorandum by that division. The drag results, which are covered by this memorandum, were obtained with the original nacelle condition as received from the Navy with the tail of the nacelle modified, with the nose section of the nacelle modified, with a Curtiss anti-drag ring attached to the engine, with a Type G ring developed by the N.A.C.A., and with a Type D cowling which was also developed by the N.A.C.A.' (p. 1) This picture shows the engine with a Curtiss anti-drag ring attached. The NACA tested several different modifications and cowlings as noted above. The Navy did not want to make any major structural alterations to the original wing and nacelle installation. Thus, the NACA did not conduct a full investigation of the aerodynamics of this particular configuration. DeFrance concludes his report with this note: 'in view of the limitations of the test, the drag data for the combinations tested may be summarized, and considering the necessity of temperature control and accessibility to the engine it is apparent that the best combination tested was with the large nose piece, the Curtiss anti-drag ring, and the modified tail section.'

  20. The Prevalence of Dental Anxiety in Patients of a University Dental Clinic

    ERIC Educational Resources Information Center

    Woodmansey, Karl F.

    2005-01-01

    Dental anxiety remains a pervasive barrier to dental treatment for many individuals, including college-age patients. In this article, the author reviews dental anxiety and examines the usefulness of assessment instruments for identifying dental anxiety. Using 2 unique assessment instruments, he examines the prevalence of dental anxiety in his…

  1. Status of the Predoctoral Dental Education Program and Its Impact on Graduate Dental Education.

    ERIC Educational Resources Information Center

    Allen, Don L.

    1980-01-01

    The status of the current predoctoral dental program and its relationship to graduate dental education is described. Factors that have influenced the dental curriculum and major changes that have occurred are presented. Major issues facing dental education are outlined. A proposal is presented for greater flexibility in dental education.…

  2. Antibacterial Dental Composites with Chlorhexidine and Mesoporous Silica

    PubMed Central

    Zhang, J.F.; Wu, R.; Fan, Y.; Liao, S.; Wang, Y.; Wen, Z.T.; Xu, X.

    2014-01-01

    One of the leading causes for the failure of dental composite restorations is secondary caries. Effectively inhibiting cariogenic biofilms and reducing secondary caries could extend the service life of composite restorations. Dental composites releasing antibacterial agents such as chlorhexidine (CHX) have shown biofilm-inhibitory efficacy, but they usually have poor physical and mechanical properties. Herein, we present a study of a new method to encapsulate and release CHX from dental composite using mesoporous silica nanoparticles (MSNs). SBA-15 MSNs were synthesized according to a reported procedure. CHX (62.9 wt%) was encapsulated into dried MSN from 0.3 M CHX ethanol solution. The dental composites containing 0% (control), 3%, 5%, and 6.3% CHX or the same amounts of CHX entrapped in MSN (denoted as CHX@MSN) were fabricated with methacrylate monomers and silanized glass fillers (CHX or CHX@MSN + glass filler particle = 70 wt%). The monomer mixture consisted of bisphenol A glycidyl methacrylate (BisGMA), hexanediol dimethacrylate (HDDMA), ethoxylated bisphenol A dimethacrylate (EBPADMA), and urethane dimethacrylates (UEDMA) at a weight ratio of 40:30:20:10. The composites were tested for CHX release and recharge, flexural strength and modulus (at 24 hr and 1 mo), surface roughness, in vitro wear, and antibacterial activity against Streptococcus mutans and Lactobacillus casei (in both planktonic growth and biofilm formation). The results showed that the composites with CHX@MSN largely retained mechanical properties and smooth surfaces and showed controlled release of CHX over a long time. In contrast, the composites with directly mixed CHX showed reduced mechanical properties, rough surfaces, and burst release of CHX in a short time. The composites with CHX either directly mixed or in MSN showed strong inhibition to S. mutans and L. casei. This research has demonstrated the successful application of MSNs as a novel nanotechnology in dental materials to inhibit

  3. Antibacterial dental composites with chlorhexidine and mesoporous silica.

    PubMed

    Zhang, J F; Wu, R; Fan, Y; Liao, S; Wang, Y; Wen, Z T; Xu, X

    2014-12-01

    One of the leading causes for the failure of dental composite restorations is secondary caries. Effectively inhibiting cariogenic biofilms and reducing secondary caries could extend the service life of composite restorations. Dental composites releasing antibacterial agents such as chlorhexidine (CHX) have shown biofilm-inhibitory efficacy, but they usually have poor physical and mechanical properties. Herein, we present a study of a new method to encapsulate and release CHX from dental composite using mesoporous silica nanoparticles (MSNs). SBA-15 MSNs were synthesized according to a reported procedure. CHX (62.9 wt%) was encapsulated into dried MSN from 0.3 M CHX ethanol solution. The dental composites containing 0% (control), 3%, 5%, and 6.3% CHX or the same amounts of CHX entrapped in MSN (denoted as CHX@MSN) were fabricated with methacrylate monomers and silanized glass fillers (CHX or CHX@MSN + glass filler particle = 70 wt%). The monomer mixture consisted of bisphenol A glycidyl methacrylate (BisGMA), hexanediol dimethacrylate (HDDMA), ethoxylated bisphenol A dimethacrylate (EBPADMA), and urethane dimethacrylates (UEDMA) at a weight ratio of 40:30:20:10. The composites were tested for CHX release and recharge, flexural strength and modulus (at 24 hr and 1 mo), surface roughness, in vitro wear, and antibacterial activity against Streptococcus mutans and Lactobacillus casei (in both planktonic growth and biofilm formation). The results showed that the composites with CHX@MSN largely retained mechanical properties and smooth surfaces and showed controlled release of CHX over a long time. In contrast, the composites with directly mixed CHX showed reduced mechanical properties, rough surfaces, and burst release of CHX in a short time. The composites with CHX either directly mixed or in MSN showed strong inhibition to S. mutans and L. casei. This research has demonstrated the successful application of MSNs as a novel nanotechnology in dental materials to inhibit

  4. Undergraduate dental English education in Japanese dental schools.

    PubMed

    Rodis, Omar M M; Matsumura, Seishi; Kariya, Naoyuki; Nishimura, Michiko; Yoshida, Toshiko

    2013-05-01

    Dental schools in Japan are among many worldwide whose medium of instruction is not in English. With advances in science, technology, and communication, the demand for the globalization of professions increases. At present, dental schools in Asia, the Middle East, and Europe have started revising their dental curricula to either include English courses for dentistry or offer a full English dental curriculum. In Japan, dental English courses started to be introduced into curricula in the early 1990s. However, a survey conducted in 1999 found that English courses were not offered in Japan's twenty-nine dental schools and there was no consensus as to what such courses should include or when and how they should be taught. Ten years after that survey, the survey results reported in this article found that the problems reported in the 1999 survey still exist. Additionally, there are still differences among schools offering English courses in terms of the timing and contents of the courses. Since teachers and school officials will have an important role in curriculum development, this article recommends that a fact-finding meeting with educators, school, and education officials be initiated to discuss, develop, and implement a core curriculum for these dental English courses.

  5. Understanding dental CAD/CAM for restorations--dental milling machines from a mechanical engineering viewpoint. Part B: labside milling machines.

    PubMed

    Lebon, Nicolas; Tapie, Laurent; Duret, Francois; Attal, Jean-Pierre

    2016-01-01

    Nowadays, dental numerical controlled (NC) milling machines are available for dental laboratories (labside solution) and dental production centers. This article provides a mechanical engineering approach to NC milling machines to help dental technicians understand the involvement of technology in digital dentistry practice. The technical and economic criteria are described for four labside and two production center dental NC milling machines available on the market. The technical criteria are focused on the capacities of the embedded technologies of milling machines to mill prosthetic materials and various restoration shapes. The economic criteria are focused on investment cost and interoperability with third-party software. The clinical relevance of the technology is discussed through the accuracy and integrity of the restoration. It can be asserted that dental production center milling machines offer a wider range of materials and types of restoration shapes than labside solutions, while labside solutions offer a wider range than chairside solutions. The accuracy and integrity of restorations may be improved as a function of the embedded technologies provided. However, the more complex the technical solutions available, the more skilled the user must be. Investment cost and interoperability with third-party software increase according to the quality of the embedded technologies implemented. Each private dental practice may decide which fabrication option to use depending on the scope of the practice.

  6. Pressure- and Temperature-Sensitive Paint at 0.3-m Transonic Cryogenic Tunnel

    NASA Technical Reports Server (NTRS)

    Watkins, A. Neal; Leighty, Bradley D.; Lipford, William E.; Goodman, Kyle Z.

    2015-01-01

    Recently both Pressure- and Temperature-Sensitive Paint experiments were conducted at cryogenic conditions in the 0.3-m Transonic Cryogenic Tunnel at NASA Langley Research Center. This represented a re-introduction of the techniques to the facility after more than a decade, and provided a means to upgrade the measurements using newer technology as well as demonstrate that the techniques were still viable in the facility. Temperature-Sensitive Paint was employed on a laminar airfoil for transition detection and Pressure-Sensitive Paint was employed on a supercritical airfoil. This report will detail the techniques and their unique challenges that need to be overcome in cryogenic environments. In addition, several optimization strategies will also be discussed.

  7. Trends in Dentistry and Dental Education.

    ERIC Educational Resources Information Center

    Valachovic, Richard W.; Weaver, Richard G.; Sinkford, Jeanne C.; Haden, N. Karl

    2001-01-01

    Compiled from many of the surveys that the American Dental Education Association routinely publishes, along with data from surveys conducted by the American Dental Association and U.S. Department of Health and Human Services, presents statistical tables and descriptive text on trends among dental patients, among dental practitioners, and in dental…

  8. Dental photography today. Part 1: basic concepts

    PubMed Central

    CASAGLIA, A.; DE DOMINICIS, P.; ARCURI, L.; GARGARI, M.; OTTRIA, L.

    2015-01-01

    SUMMARY This paper is the first article in a new series on digital dental photography. Part 1 defines the aims and objectives of dental photography for examination, diagnosis and treatment planning, legal and forensic documentation, publishing, education, marketing and communication with patients, dental team members, colleagues and dental laboratory. PMID:28042424

  9. 21 CFR 872.3275 - Dental cement.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Dental cement. 872.3275 Section 872.3275 Food and... DENTAL DEVICES Prosthetic Devices § 872.3275 Dental cement. (a) Zinc oxide-eugenol—(1) Identification... filling or as a base cement to affix a temporary tooth filling, to affix dental devices such as crowns...

  10. 21 CFR 872.3275 - Dental cement.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Dental cement. 872.3275 Section 872.3275 Food and... DENTAL DEVICES Prosthetic Devices § 872.3275 Dental cement. (a) Zinc oxide-eugenol—(1) Identification... filling or as a base cement to affix a temporary tooth filling, to affix dental devices such as crowns...

  11. 21 CFR 872.3275 - Dental cement.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Dental cement. 872.3275 Section 872.3275 Food and... DENTAL DEVICES Prosthetic Devices § 872.3275 Dental cement. (a) Zinc oxide-eugenol—(1) Identification... filling or as a base cement to affix a temporary tooth filling, to affix dental devices such as crowns...

  12. 21 CFR 872.3275 - Dental cement.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Dental cement. 872.3275 Section 872.3275 Food and... DENTAL DEVICES Prosthetic Devices § 872.3275 Dental cement. (a) Zinc oxide-eugenol—(1) Identification... filling or as a base cement to affix a temporary tooth filling, to affix dental devices such as crowns...

  13. 21 CFR 872.3100 - Dental amalgamator.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... is intended for filling dental caries. (b) Classification. Class I (general controls). The device is... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Dental amalgamator. 872.3100 Section 872.3100 Food... DEVICES DENTAL DEVICES Prosthetic Devices § 872.3100 Dental amalgamator. (a) Identification. A...

  14. Involving Parents in Their Children's Dental Care.

    ERIC Educational Resources Information Center

    Becker, Donna

    1998-01-01

    Asserts that parent education is vital to good dental hygiene for the whole family. Discusses what Head Start staffers can do to ensure that children's dental needs are being met, particularly in assisting parents with taking responsibility for children's dental hygiene. Covers dental care tips for parents, questions and answers about dental…

  15. Dental Curriculum Development in Developing Countries.

    ERIC Educational Resources Information Center

    Phantumvanit, Prathip

    1996-01-01

    Since establishment of formal dental education in Southeast Asia, changes stemming from research and technology have led to dental curriculum changes. Development of the dental curriculum can be divided into three phases: disease oriented; health oriented; and community oriented. Evolution of these phases is traced in the dental curricula of Laos,…

  16. 21 CFR 872.3275 - Dental cement.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Dental cement. 872.3275 Section 872.3275 Food and... DENTAL DEVICES Prosthetic Devices § 872.3275 Dental cement. (a) Zinc oxide-eugenol—(1) Identification... filling or as a base cement to affix a temporary tooth filling, to affix dental devices such as crowns...

  17. Sources of Dental Health Teaching Aids.

    ERIC Educational Resources Information Center

    Crawford, Jean H.

    1982-01-01

    Sources of dental health education teaching aids which are available for free or at minimal cost include: (1) The American Dental Health Association; (2) state and local departments of public health; (3) schools of dentistry, dental hygiene, and dental assisting; and (4) the Educator's International Guide. (JN)

  18. 21 CFR 872.3700 - Dental mercury.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Dental mercury. 872.3700 Section 872.3700 Food and... DENTAL DEVICES Prosthetic Devices § 872.3700 Dental mercury. (a) Identification. Dental mercury is a device composed of mercury intended for use as a component of amalgam alloy in the restoration of...

  19. 21 CFR 872.3100 - Dental amalgamator.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... is intended for filling dental caries. (b) Classification. Class I (general controls). The device is... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Dental amalgamator. 872.3100 Section 872.3100 Food... DEVICES DENTAL DEVICES Prosthetic Devices § 872.3100 Dental amalgamator. (a) Identification. A...

  20. 21 CFR 872.3100 - Dental amalgamator.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... is intended for filling dental caries. (b) Classification. Class I (general controls). The device is... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Dental amalgamator. 872.3100 Section 872.3100 Food... DEVICES DENTAL DEVICES Prosthetic Devices § 872.3100 Dental amalgamator. (a) Identification. A...

  1. 21 CFR 872.3100 - Dental amalgamator.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... is intended for filling dental caries. (b) Classification. Class I (general controls). The device is... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Dental amalgamator. 872.3100 Section 872.3100 Food... DEVICES DENTAL DEVICES Prosthetic Devices § 872.3100 Dental amalgamator. (a) Identification. A...

  2. 21 CFR 872.3100 - Dental amalgamator.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... is intended for filling dental caries. (b) Classification. Class I (general controls). The device is... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Dental amalgamator. 872.3100 Section 872.3100 Food... DEVICES DENTAL DEVICES Prosthetic Devices § 872.3100 Dental amalgamator. (a) Identification. A...

  3. INSIGHTS INTO PREVENTIVE MEASURES FOR DENTAL EROSION

    PubMed Central

    Magalhães, Ana Carolina; Wiegand, Annette; Rios, Daniela; Honório, Heitor Marques; Buzalaf, Marília Afonso Rabelo

    2009-01-01

    Dental erosion is defined as the loss of tooth substance by acid exposure not involving bacteria. The etiology of erosion is related to different behavioral, biological and chemical factors. Based on an overview of the current literature, this paper presents a summary of the preventive strategies relevant for patients suffering from dental erosion. Behavioral factors, such as special drinking habits, unhealthy lifestyle factors or occupational acid exposure, might modify the extent of dental erosion. Thus, preventive strategies have to include measures to reduce the frequency and duration of acid exposure as well as adequate oral hygiene measures, as it is known that eroded surfaces are more susceptible to abrasion. Biological factors, such as saliva or acquired pellicle, act protectively against erosive demineralization. Therefore, the production of saliva should be enhanced, especially in patients with hyposalivation or xerostomia. With regard to chemical factors, the modification of acidic solutions with ions, especially calcium, was shown to reduce the demineralization, but the efficacy depends on the other chemical factors, such as the type of acid. To enhance the remineralization of eroded surfaces and to prevent further progression of dental wear, high-concentrated fluoride applications are recommended. Currently, little information is available about the efficacy of other preventive strategies, such as calcium and laser application, as well as the use of matrix metalloproteinase inhibitors. Further studies considering these factors are required. In conclusion, preventive strategies for patients suffering from erosion are mainly obtained from in vitro and in situ studies and include dietary counseling, stimulation of salivary flow, optimization of fluoride regimens, modification of erosive beverages and adequate oral hygiene measures. PMID:19274390

  4. Experience and Challenges in Implementing Stratospheric Aerosol Gas Experiment on Meteor-3M Platform

    NASA Technical Reports Server (NTRS)

    Habib, Shahid; Newsom, Jerry; Rawls, Richard

    2001-01-01

    Implementation of Stratospheric Aerosol Gas Experiment (SAGE) is a joint science mission between the Rosavioskosmos, also called Russian Aviation and Space Agency (RASA) and the National Aeronautics and Space Administration (NASA). Under the global collaboration agreement established by President Clinton and Yeltsin in 1995 between the United States and Russia, space was one of the major areas identified for joint scientific collaboration. There were several collaborative projects identified under space, earth, human exploration of space and aeronautics. SAGE was one of the key Earth Science instruments selected common to both countries' interests in ozone research. SAGE has a long space heritage, and four earlier versions of this instrument have flown in space for the last 15-year period. It has provided a vital ozone and aerosol data in the mid latitudes and has contributed in the overall ozone depletion research. SAGE II, the fourth instrument has been flying in space on NASA's Earth Radiation Budget Satellite (ERBS) for the last 14 years. Ball Aerospace built the instrument under Langley Research Center's (LaRC) management. SAGE III for Russian Meteor-3M mission is a third generation design with more spectral bands, elaborate data gathering and storage and intelligent terrestrial software. The Russian collaboration required a complete integration of SAGE III on the Russian Meteor-3M satellite and a launch on a Zenit-2 launch vehicle manufactured in Ukraine. The whole complex is scheduled to be launched from Baikonur cosmodrome in early 2001. This cooperative mission has presented a number of management, technical and logistical challenges on both sides. This paper makes an attempt to review and document such experiences.

  5. Dental coping strategies, general anxiety, and depression among adult patients with dental anxiety but with different dental-attendance patterns.

    PubMed

    Bernson, Jenny M; Elfström, Magnus L; Hakeberg, Magnus

    2013-06-01

    The aim of the present study was to investigate dental coping strategies, general anxiety, and depression in relation to regularity of dental treatment among persons with either regular dental care or phobic avoidance, whilst controlling for sociodemographic factors. Psychometric questionnaires on dental anxiety, dental coping strategies, general anxiety, and depression were delivered to 263 adult patients with dental phobic avoidance behavior who were seeking help from a specialized dental fear clinic and to 141 adult patients with dental anxiety who were receiving regular dental care from various public dental clinics. The results showed that the levels of dental and general anxiety and of depression were significantly higher among irregular attendees compared with regular attendees. Irregular attendees admitted fewer adaptive coping strategies. Predictive of irregular dental care were gender, dental anxiety, general anxiety, and the nonuse of the coping strategy 'optimism'. This study further confirms earlier preliminary results that the use of optimistic thinking is predictive for regular dental attendance habits and that male gender is a risk factor for irregular attendance. Moreover, this study adds that a high level of general anxiety indicates a higher risk for irregular dental care.

  6. A simplified impression technique for dental implants.

    PubMed

    Vogel, Robert E

    2002-03-01

    Dental implants have been considered an acceptable form of dental treatment since the early 1980s. A number of studies have been published describing impression techniques for dental implants. Many of the techniques described are so complex that they may seem daunting to the average restorative dentist. Most general practitioners do not wish to attempt to restore dental implants. This article describes a very simple, yet extremely accurate, technique for making impressions of dental implant fixtures.

  7. A Survey of Civilian Dental Computer Systems.

    DTIC Science & Technology

    1988-01-01

    r.arketplace, the orthodontic community continued to pioneer clinical automation through diagnosis, treat- (1) patient registration, identification...profession." New York State Dental Journal 34:76, 1968. 17. Ehrlich, A., The Role of Computers in Dental Practice Management. Champaign, IL: Colwell...Council on Dental military dental clinic. Medical Bulletin of the US Army Practice. Report: Dental Computer Vendors. 1984 Europe 39:14-16, 1982. 19

  8. Initial dental needs and a projection of needed dental capacity in the Iowa Department of Corrections.

    PubMed

    Ringgenberg, Wendy J

    2011-04-01

    The dental health data for the Iowa Department of Corrections (IDOC) inmate population were analyzed to better understand dental health issues experienced by inmates and IDOC's system for responding to those dental needs. Each inmate is given a dental health assessment upon admission to Iowa's prison system. These data were analyzed for frequency of dental health needs and frequency of dental health services. In addition, emergency dental health services were analyzed. The findings show that each inmate has approximately 7.6 dental codes, including the initial exam, dental services provided, and dental needs not yet addressed. When reviewing only dental needs (and not the initial exam), 32% (5,110) identified dental needs were completed and 66% (10,572) were not.

  9. Roughness Measurement of Dental Materials

    NASA Astrophysics Data System (ADS)

    Shulev, Assen; Roussev, Ilia; Karpuzov, Simeon; Stoilov, Georgi; Ignatova, Detelina; See, Constantin von; Mitov, Gergo

    2016-06-01

    This paper presents a roughness measurement of zirconia ceramics, widely used for dental applications. Surface roughness variations caused by the most commonly used dental instruments for intraoral grinding and polishing are estimated. The applied technique is simple and utilizes the speckle properties of the scattered laser light. It could be easily implemented even in dental clinic environment. The main criteria for roughness estimation is the average speckle size, which varies with the roughness of zirconia. The algorithm used for the speckle size estimation is based on the normalized autocorrelation approach.

  10. [Allergies to dental materials and dental pharmacologic agents].

    PubMed

    Gall, H

    1983-07-01

    Allergic reactions to dental materials and remedies cause stomatitis in the patient and a contact dermatitis in the dental personnel. Topical contact (acrylic resin denture materials, heat accumulation, plaques on the denture) and endogenic (symptom of internal and psychiatric illnesses) factors are the cause for denture sore mouth. In metallic alloys corrosions and electric currents can effect an irritation to the oral mucosa. The application of amalgam fillings can possibly result in a mercurialism. Dental remedies used for treatment of wounds and dental roots are potent sensitizers. Surface anesthetics with tetracaine are the most frequent contact allergens for dentists. Injectable local anesthetics produce anaphylactic type reactions as well as toxic side-effects in the patient.

  11. Dental Radiology I Student Guide [and Instructor Guide].

    ERIC Educational Resources Information Center

    Fox Valley Technical Coll., Appleton, WI.

    The dental radiology student and instructor guides provide instruction in the following units: (1) x-ray physics; (2) x-ray production; (3) radiation health and safety; (4) radiographic anatomy and pathology; (5) darkroom setup and chemistry; (6) bisecting angle technique; (7) paralleling technique; (8) full mouth survey technique--composition and…

  12. Do dental students cheat?

    PubMed

    Fuller, J L; Killip, D E

    1979-12-01

    In a questionnaire survey, dental students from all four classes at The University of Iowa College of Dentistry were asked if they had cheated during their first and second years. They were then asked if they believed that others cheated. Cheating was admitted to by 43 percent of the respondents, but 94 percent believed it was occurring. Plagiarism was delineated as a form of cheating; while fewer students admitted to its use, the reported occurrence should be of concern in technique courses. Responses were analyzed both by year in school and grade point average. Reasons for cheating were described; and some conditions conducive to cheating were found to be under the control of the instructor.

  13. Dental Arch Wire

    NASA Technical Reports Server (NTRS)

    1979-01-01

    Straightening teeth is an arduous process requiring months, often years, of applying corrective pressure by means of arch wires-better known as brace-which may have to be changed several times in the course of treatment. A new method has been developed by Dr. George Andreasen, orthodontist and dental scientist at the University of Iowa. The key is a new type of arch wire material, called Nitinol, with exceptional elasticity which helps reduce the required number of brace changes. An alloy of nickel and titanium, Nitinol was originally developed for aerospace applications by the Naval Ordnance Laboratory, now the Naval Surface Weapons Laboratory, White Oaks, Maryland. NASA subsequently conducted additional research on the properties of Nitinol and on procedures for processing the metal.

  14. Epidemiology of dental caries.

    PubMed

    Winter, G B

    1990-01-01

    The most recent epidemiological data on the prevalence of dental caries in children indicate a halting of the increasing levels in many developing countries and a continuing decrease in many highly industrialized countries of the world. However, a further fall in caries levels predicted for 5-yr-old children in the U.K. has not occurred and the decline in caries may have begun to level out. 'Polarization' of caries to a minority of high-risk individuals is occurring in the developed world, with 20-25% of children accounting for more than 50% of the disease. Socio-economic factors are important in determining the proportion of high-risk children in these countries. The multifactorial aetiology of caries allows a number of different interpretations to account for changes in the prevalence of the disease with time, in both the developing and developed countries. These changes are variously ascribed to alterations in dietary habits, especially the consumption of sugar; variations in the patterns of oral hygiene; increased contact with trace elements, especially fluoride, in the environment; changes in the ecology and/or virulence of oral and dental plaque microflora and alterations in the oral protective mechanisms including the immune status. The epidemiological evidence available on the relationship of all these social, environmental and other factors to changes in the prevalence levels of caries does not, however, fully explain all the changes that have been observed. The claim that caries is no longer a public health problem is premature, as it ignores the still high proportion of individuals with tooth decay throughout the world.

  15. Basic principles of dental office logistics: organizing dental supplies and equipment for optimal accessibility.

    PubMed

    Mamoun, John

    2012-01-01

    To maximize office production, dentists should continuously perform treatment-related tasks throughout the workday. To this end, the office should logically organize and store dental instruments, disposables, materials, handpieces, and small equipment to optimize accessibility of these items at the moment when the dentist needs them. The office needs multiple copies of these items to prevent their inaccessibility during the workday due to breakdown, inventory depletion, or lack of a sterilized copy of the item when needed. Staff should know where all items are located in the office at all times to minimize the time needed to search for them. This article describes how to organize dental items in an office for optimal accessibility to the dentist during procedures.

  16. Observation of 20-400 kHz fluctuations in the U-3M torsatron

    NASA Astrophysics Data System (ADS)

    Dreval, M. B.; Yakovenko, Yu. V.; Sorokovoy, E. L.; Slavnyj, A. S.; Pavlichenko, R. O.; Kulaga, A. E.; Zamanov, N. V.; Hirose, A.

    2016-02-01

    First observations of quasi-coherent fluctuations in the frequency range of 20-400 kHz in Alfvén-wave-heated plasmas of the U-3M torsatron are presented. The excitation conditions of these modes depend on the radio frequency antenna type and the plasma density, the appearance of the modes correlating with the presence of both suprathermal electrons and high-energy ions in the plasma, which supports our opinion that the modes are excited by energetic particles. Complicated evolution of the mode frequencies with abrupt changes at the instants of plasma confinement transitions is observed at the initial stage of each discharge. The frequencies become stable at the stage of the plasma current flattop. Raw estimates show that toroidicity-induced Alfvén eigenmodes could be responsible for the 150-400 kHz fluctuations. Low-frequency 20-70 kHz bursts are observed during plasma confinement transitions. The poloidal mode number of one of these bursts with the frequency of 20 kHz burst was determined to be m = 2. This mode rotated in the electron diamagnetic rotation direction with a frequency lower than the geodesic acoustic mode frequency and can be identified as a drift-sound-type mode.

  17. The RCT 1.3 m robotic telescope: broadband color transformation and extinction calibration

    SciTech Connect

    Strolger, L.-G.; Gott, A. M.; Carini, M.; Gelderman, R.; Laney, C. D.; McGruder, C.; Engle, S.; Guinan, E.; Treffers, R. R.; Walter, D. K.

    2014-03-01

    The Robotically Controlled Telescope (RCT) 1.3 m telescope, formerly known as the Kitt Peak National Observatory (KPNO) 50 inch telescope, has been refurbished as a fully robotic telescope, with an autonomous scheduler to take full advantage of the observing site without the requirement of a human presence. Here we detail the current configuration of the RCT and present, as a demonstration of its high-priority science goals, the broadband UBVRI photometric calibration of the optical facility. In summary, we find the linear color transformation and extinction corrections to be consistent with similar optical KPNO facilities, to within a photometric precision of 10% (at 1σ). While there were identified instrumental errors that likely added to the overall uncertainty, associated with since-resolved issues in engineering and maintenance of the robotic facility, a preliminary verification of this calibration gave a good indication that the solution is robust, perhaps to a higher precision than this initial calibration implies. The RCT has been executing regular science operations since 2009 and is largely meeting the science requirements set during its acquisition and redesign.

  18. Oxidation, Reduction, and Condensation of Alcohols over (MO3)3 (M=Mo, W) Nanoclusters

    SciTech Connect

    Fang, Zongtang; Li, Zhenjun; Kelley, Matthew S.; Kay, Bruce D.; Li, Shenggang; Hennigan, Jamie M.; Rousseau, Roger J.; Dohnalek, Zdenek; Dixon, David A.

    2014-10-02

    The reactions of deuterated methanol, ethanol, 1-propanol, 1-butanol, 2-propanol, 2-butanol and t-butanol over cyclic (MO3)3 (M = Mo, W) clusters were studied experimentally with temperature programmed desorption (TPD) and theoretically with coupled cluster CCSD(T) theory and density functional theory. The reactions of two alcohols per M3O9 cluster are required to provide agreement with experiment for D2O release, dehydrogenation and dehydration. The reaction begins with the elimination of water by proton transfers and forms an intermediate dialkoxy species which can undergo further reaction. Dehydration proceeds by a β hydrogen transfer to a terminal M=O. Dehydrogenation takes place via an α hydrogen transfer to an adjacent MoVI = O atom or a WVI metal center with redox involved for M = Mo and no redox for M = W. The two channels have comparable activation energies. H/D exchange to produce alcohols can take place after olefin is released or via the dialkoxy species depending on the alcohol and the cluster. The Lewis acidity of the metal center with WVI being larger than MoVI results in the increased reactivity of W3O9 over Mo3O9 for dehydrogenation and dehydration.

  19. Analysis of temperature-time data from 3 m drillholes at Crystal Hot Springs, Utah

    SciTech Connect

    Howell, J.; Chapman, D.S.

    1986-01-01

    A method for determining the background geothermal gradient values through the analysis of temperature measurements at multiple depths to 3 m and recorded over a time span of several days is presented. The analysis is based on the amplitude decay and phase shift of temperature waves with depth. Diurnal and other high frequency temperature variations are used to compute thermal diffusivities which in turn are used to model and remove the effect of the annual temperature wave. The analysis considers both a homogeneous half space and a two layer medium consisting of an overburden of finite thickness overlying a semi-infinite substratum. The method was tested in three holes in the Crystal Hot Springs geothermal field. Temperatures in each hole were recorded once a minute over a period of three days with a probe containing thermistors at eight different depths. Five of the thermistors were positioned at shallow depths (less than or equal to 0.5 m) to monitor diurnal and other high frequency waves and three at greater depths (greater than or equal to 1 m) to measure lower frequency variations. Since measurements were recorded at only three sites, the accuracy and reliability of the method is not fully evaluated. Potential problems to the method resulting from inaccurate model parameters and convective heat transport are investigated.

  20. Cleaning of inner vacuum surfaces in the Uragan-3M facility by radio-frequency discharges

    SciTech Connect

    Lozin, A. V. Moiseenko, V. E.; Grigor’eva, L. I.; Kozulya, M. M.; Kulaga, A. E.; Lysoivan, A. I.; Mironov, Yu. K.; Pavlichenko, R. O.; Romanov, V. S.; Chernyshenko, V. Ya.; Chechkin, V. V.; Collaboration: Uragan-3M Team

    2013-08-15

    A method for cleaning vacuum surfaces by a low-temperature (T{sub e} ∼ 10 eV) relatively dense (n{sub e} ≈ 10{sup 12} cm{sup −3}) plasma of an RF discharge was developed and successfully applied at the Uragan-3M torsatron. The convenience of the method is that it can be implemented with the same antenna system and RF generators that are used to produce and heat the plasma in the operating mode and does not require retuning the frequencies of the antennas and RF generators. The RF discharge has a high efficiency from the standpoint of cleaning vacuum surfaces. After performing a series of cleanings by the low-temperature RF discharge plasma (about 20000 pulses), (i) the intensity of the CIII impurity line was substantially reduced, (ii) a quasi-steady operating mode with a duration of up to 50 ms, a plasma density of n{sub e} ≈ 10{sup 12} cm{sup −3}, and an electron temperature of up to T{sub e} ∼ 1 keV was achieved, and (iii) mass spectrometric analysis of the residual gas in the chamber indicated a significant reduction in the impurity content.

  1. GRACOS: Scalable and Load Balanced P3M Cosmological N-body Code

    NASA Astrophysics Data System (ADS)

    Shirokov, Alexander; Bertschinger, Edmund

    2010-10-01

    The GRACOS (GRAvitational COSmology) code, a parallel implementation of the particle-particle/particle-mesh (P3M) algorithm for distributed memory clusters, uses a hybrid method for both computation and domain decomposition. Long-range forces are computed using a Fourier transform gravity solver on a regular mesh; the mesh is distributed across parallel processes using a static one-dimensional slab domain decomposition. Short-range forces are computed by direct summation of close pairs; particles are distributed using a dynamic domain decomposition based on a space-filling Hilbert curve. A nearly-optimal method was devised to dynamically repartition the particle distribution so as to maintain load balance even for extremely inhomogeneous mass distributions. Tests using 800(3) simulations on a 40-processor beowulf cluster showed good load balance and scalability up to 80 processes. There are limits on scalability imposed by communication and extreme clustering which may be removed by extending the algorithm to include adaptive mesh refinement.

  2. Dental Health: The Basic Facts

    MedlinePlus

    ... MS. Resources Academy of General Dentistry 211 East Chicago Avenue Suite 900 Chicago, Illinois 60611 Tel: 888-243-3368 Web site: ... Ask a question American Dental Association 211 East Chicago Avenue Chicago, Illinois 60611 Tel: 312-440-2500 ...

  3. Vocational Interests of Dental Hygienists

    ERIC Educational Resources Information Center

    Ishida, Helen

    1975-01-01

    Using the Strong Vocational Interest Blank, an occupational interest scale for dental hygienists was developed, and comparisons of interests were made between graduates of two- and four-year programs. (Author)

  4. Dental insurance! Are we ready?

    PubMed

    Toor, Ravi S S; Jindal, R

    2011-01-01

    Dental insurance is insurance designed to pay the costs associated with dental care. The Foreign Direct Investment (FDI) bill which was put forward in the winter session of the Lok Sabha (2008) focused on increasing the foreign investment share from the existing 26% to 49% in the insurance companies of India. This will allow the multibillion dollar international insurance companies to enter the Indian market and subsequently cover all aspects of insurance in India. Dental insurance will be an integral a part of this system. Dental insurance is a new concept in Southeast Asia as very few countries in Southeast Asia cover this aspect of insurance. It is important that the dentists in India should be acquainted with the different types of plans these companies are going to offer and about a new relationship which is going to emerge in the coming years between dentist, patient and the insurance company.

  5. Dental abscess: A microbiological review

    PubMed Central

    Shweta; Prakash, S Krishna

    2013-01-01

    Dental abscess is a frequently occurring infectious process known to the health practice. The fate of the infection depends on the virulence of the bacteria, host resistance factors, and regional anatomy. Serious consequences arising from the spread of a dental abscess lead to significant morbidity and mortality. Acute dental abscess is polymicrobial, comprising of strict anaerobes, such as anaerobic cocci, Prevotella, Fusobacterium species, and facultative anaerobes, such as viridans group streptococci and the Streptococcus anginosus group. Numerous novel, uncultivable and fastidious organisms have been identified as potential pathogens with the use of non-culture techniques. The majority of localized dental abscesses respond to surgical treatment while the use of antimicrobials is limited to severe spreading infections. There is a need for good-quality clinical trials of sufficient size to identify the ideal treatment. The microbiology of the acute dentoalveolar abscess and its treatment in the light of improved culture and diagnostic methods are reviewed. PMID:24348613

  6. Dental disease in geriatric horses.

    PubMed

    Lowder, M Q; Mueller, P O

    1998-08-01

    The dental management of geriatric horses can be a rewarding challenge to the practitioner. Owners become dissatisfied when their expectations are unrealistic. Consequently, communication between the owner and the practitioner is essential prior to the start of any dental procedure in a geriatric horse. Owners often expect the practitioner to correct what has been neglected for years. It is critical that the owner understand the possible complications associated with dental procedures and that some procedures (e.g., trephination) may necessitate protracted care. Often, when a tooth has been removed, there is a need for more frequent masticatory examinations to curtail any potential problems (i.e., development of step mouth). The owner needs to be aware of the extra dental maintenance costs that must be included in the upkeep of the horse.

  7. Lip Lifting: Unveiling Dental Beauty.

    PubMed

    Stanley, Kyle; Caligiuri, Matthew; Schlichting, Luís Henrique; Bazos, Panaghiotis K; Magne, Michel

    2017-01-01

    The focus for the achievement of complete success in the esthetic zone has traditionally been on addressing deficiencies of intraoral hard and soft tissue. Often, these deficiencies are accompanied by esthetic concerns regarding the lips that are routinely neglected by the dental team. A predictable plastic surgery technique - the lip lift - has been used for decades to enhance lip esthetics by shortening the senile upper lip to achieve a more youthful appearance. Over the years, this technique has been refined and used in many different ways, allowing its routine incorporation into full facial esthetic planning. Through restoration of the upper lip to its optimal position, the artistry of the dentist and dental technician can truly be appreciated in the rejuvenated smile. By the introduction of this minimally invasive surgical technique to the dental community, patients stand to benefit from a comprehensive orofacial approach to anterior dental esthetic planning.

  8. Clinical Medicine for Dental Students.

    ERIC Educational Resources Information Center

    Stearns, Norman S.; And Others

    1985-01-01

    A program providing instruction in medical topics throughout the dental curriculum at Tufts University is described, and the results of a survey indicating alumni satisfaction with training in physical evaluation techniques and ability to detect medical problems are discussed. (MSE)

  9. Relief hologram replication using a dental composite as an embossing tool

    NASA Astrophysics Data System (ADS)

    Savić Šević, Svetlana; Pantelić, Dejan

    2005-04-01

    A simplified method for holographic embossing tool production is presented. Surface relief diffraction gratings are holographically recorded in pullulan sensitized with ammonium dichromate (DCP). The surface structure is copied into dental photopolymer composite by direct contact and subsequent photo-polymerization. It was found that arbitrary surface micropattern can be replicated. Due to its excellent mechanical and thermal properties, micro-patterned dental composite can be further used as an embossing tool for mass production of holograms.

  10. Relief hologram replication using a dental composite as an embossing tool.

    PubMed

    Savić Sević, Svetlana; Pantelić, Dejan

    2005-04-04

    A simplified method for holographic embossing tool production is presented. Surface relief diffraction gratings are holographically recorded in pullulan sensitized with ammonium dichromate (DCP). The surface structure is copied into dental photopolymer composite by direct contact and subsequent photo-polymerization. It was found that arbitrary surface micropattern can be replicated. Due to its excellent mechanical and thermal properties, micro-patterned dental composite can be further used as an embossing tool for mass production of holograms.

  11. Dental management of anticoagulated patients.

    PubMed

    Carr, M M; Mason, R B

    1992-10-01

    Today's trend toward ambulatory medical care will bring more pharmacological problems into the dental office. While the dental management of patients taking oral anticoagulants is controversial, current research supports the contention that they can be safely treated on an outpatient basis. The use of the International Normalized Ratio (INR) has made better estimates of prothrombin time possible, and patients can be maintained in a narrow therapeutic range. Postoperative hemorrhage can be avoided or controlled with local hemostatic agents.

  12. Dental caries pathogenicity: a genomic and metagenomic perspective

    PubMed Central

    Peterson, Scott N.; Snesrud, Erik; Schork, Nicholas J.; Bretz, Walter A.

    2013-01-01

    In this review we address the subject of dental caries pathogenicity from a genomic and metagenomic perspective. The application of genomic technologies is certain to yield novel insights into the relationship between the bacterial flora, dental health and disease. Three primary attributes of bacterial species are thought to have direct impact on caries development, these include: adherence on tooth surfaces (biofilm formation), acid production and acid tolerance. Attempts to define the specific aetiological agents of dental caries have proven to be elusive, supporting the notion that caries aetiology is perhaps complex and multi-faceted. The recently introduced Human Microbiome Project (HMP) that endeavors to characterise the micro-organisms living in and on the human body is likely to shed new light on these questions and improve our understanding of polymicrobial disease, microbial ecology in the oral cavity and provide new avenues for therapeutic and molecular diagnostics developments. PMID:21726221

  13. Design and development of self-healing dental composites.

    PubMed

    Huyang, George; Debertin, Anne E; Sun, Jirun

    2016-03-15

    The purpose of this project is to design and develop a clinically applicable self-healing dental composite (SHDC). The value of resin-based dental restorations could be improved by increasing their service lives. One way to improve longevity is to obturate micro-cracks that form during or after the composite hardens in the dental cavity. Toward this end, we introduce here a new type of SHDC made with contemporary dental components plus two additional ingredients: a healing powder (HP, strongtium fluoroaluminosilicate particles) and a healing liquid (HL, aqueous solutions of polyacrylic acids) that is enclosed within silica microcapsules. As micro-cracks develop, they will break the microcapsules in their propagation path, thereby releasing HL. This liquid will then react with particles of HP exposed by the crack formation, forming an insoluble reaction product that fills and seals the cracks. The key factors to achieve this self-healing of cracks are discussed. The elastic modulus of a SHDC appeared to be satisfactory. The healing process was confirmed by means of mechanical, morphological, and chemical methods. The SHDC restored micro-cracks without external intervention, thereby showing potential for increasing the service lives of dental restorations. Importantly, this SHDC contains only clinically-tested, biocompatible materials, making it readily applicable.

  14. The performance characteristics of a piezoelectric ultrasonic dental scaler.

    PubMed

    Pecheva, E; Sammons, R L; Walmsley, A D

    2016-02-01

    The objective of this work was to investigate the performance characteristics of a piezoelectric ultrasonic dental scaler using scanning laser vibrometry. The vibration characteristics of three standard piezoelectric tips were assessed with scanning laser vibrometry under various conditions: unconstrained, under a stream of flowing water, in a water tank, as well as subjected to loads to simulate clinical conditions. Subsequently, the tips were used to disrupt an in-vitro biofilm model of dental plaque, developed using a non-pathogenic Gram-negative species of Serratia (NCIMB40259). The laser vibrometry data showed that the oscillation pattern of the ultrasonic tip depends primarily on its shape and design, as well as on the generator power. Thin tips and high power settings induce the highest vibrations. Water irrigation of the tip and loads influence the tip performance by diminishing its vibration, while water volume increases it. Serratia biofilm was disrupted by the cavitation bubbles occurring around the scaler tip. The most effective biofilm removal occurred with the thinner tip. Understanding how the ultrasonic tip oscillates when in use and how it removes dental plaque is essential for gaining more knowledge regarding the cleaning mechanisms of the ultrasonic system. Cavitation may be used to remove plaque and calculus without a mechanical contact between the dental tip and the teeth. Better knowledge would enable dental specialists to understand and improve their techniques during routine cleaning of teeth. It will also lead to improving tip design and to the production of more effective instruments for clinical use.

  15. Articulated dental cast analysis of asymptomatic and symptomatic populations

    PubMed Central

    Cordray, Frank E

    2016-01-01

    Dental instrumentation has long provided insight into the mechanism of musculo-skeletal function of the gnathic system. While large population studies associate dental arch displacement (DAD), especially laterally, with symptoms, mandibular condyle displacement (CD) resulting from DAD has not been targeted as possibly etiologic in the production of common muscle contraction headache (CMCH) and temporo-mandibular dysfunction (TMD). The objective was to evaluate the three-dimensional nature of DAD and CD between the seated condylar position (SCP) and the intercuspal position (ICP) and to compare results derived from large deprogrammed asymptomatic and symptomatic populations. A total of 1 192 sets of dental casts collected from asymptomatic and symptomatic populations were articulated in the SCP. The initial occlusal contact, DAD, and condylar displacement were evaluated for frequency, direction, and magnitude of displacement between the SCP and ICP. The data revealed significant displacement between the SCP and ICP of the condyles (displaced most frequently inferior (down) and posterior (distal)) and substantially increased frequency and magnitude of displacement of the dental arches (with posterior premature occlusal contacts, increased overjet, decreased overbite, midline differences, and occlusal classification changes) in symptomatic subjects. These discrepancies were statistically significant and clinically significant. The data support the concept of increased DAD and CD with dysfunction. Transverse condylar displacement, commonly presenting with dental cross bite, may be associated with CMCH and TMD. Displacement of the mandibular condyle may be an etiologic factor in CMCH and dysfunction of the temporo-mandibular joint. PMID:27357324

  16. Surface texture measurement for dental wear applications

    NASA Astrophysics Data System (ADS)

    Austin, R. S.; Mullen, F.; Bartlett, D. W.

    2015-06-01

    The application of surface topography measurement and characterization within dental materials science is highly active and rapidly developing, in line with many modern industries. Surface measurement and structuring is used extensively within oral and dental science to optimize the optical, tribological and biological performance of natural and biomimetic dental materials. Although there has historically been little standardization in the use and reporting of surface metrology instrumentation and software, the dental industry is beginning to adopt modern areal measurement and characterization techniques, especially as the dental industry is increasingly adopting digital impressioning techniques in order to leverage CAD/CAM technologies for the design and construction of dental restorations. As dental treatment becomes increasingly digitized and reliant on advanced technologies such as dental implants, wider adoption of standardized surface topography and characterization techniques will become evermore essential. The dental research community welcomes the advances that are being made in surface topography measurement science towards realizing this ultimate goal.

  17. Dental home: Patient centered dentistry

    PubMed Central

    Girish Babu, K. L.; Doddamani, G. M.

    2012-01-01

    Early childhood dental caries occurs in all racial and socioeconomic groups; however, it tends to be more prevalent in children in families belonging to the low-income group, where it is seen in epidemic proportions. Dental caries results from an overgrowth of specific organisms that are a part of normally occurring human flora. Human dental flora is site specific, and an infant is not colonized until the eruption of the primary dentition at approximately 6 to 30 months of age. The most likely source of inoculation of an infant's dental flora is the mother, or another intimate care provider, shared utensils, etc. Decreasing the level of cariogenic organisms in the mother's dental flora at the time of colonization can significantly impact the child's redisposition to caries. To prevent caries in children, high-risk individuals must be identified at an early age (preferably high-risk mothers during prenatal care), and aggressive strategies should be adopted, including anticipatory guidance, behavior modifications (oral hygiene and feeding practices), and establishment of a dental home by 1 year of age for children deemed at risk. PMID:24478960

  18. Complementary and alternative medicine usage by patients of a dental school clinic.

    PubMed

    Spector, Michael L; Fischer, Mark; Dawson, Deborah V; Holmes, David C; Kummet, Colleen; Nisly, Nicole L; Baker, Karen A K

    2012-01-01

    This pilot study investigated the prevalence and specific reasons for usage of complementary and alternative medicine (CAM) among patients of a dental school clinic. Four hundred and two patients completed a 30-page survey on CAM usage. A higher rate of CAM usage was found in this dental school clinic population than rates previously reported in a general population. More than three-quarters (76.1%) of the respondents reported using at least one CAM treatment in the past 12 months; 93.3% reported using at least one CAM treatment at some time in their lives. High rates of chiropractic use were found in this population. Tooth pain was the most frequently reported dental condition motivating CAM use. About 10% of dental school clinic patients use topical oral herbal and/or natural products to treat dental conditions, most frequently for preventive/oral health reasons or for tooth pain.

  19. Dental Attitudes, Perceptions, and Treatment Needs in a University Population.

    ERIC Educational Resources Information Center

    Cohen, Leonard A.; And Others

    1980-01-01

    Dental attitudes of college students were examined: frequency of past visits; subceptibility to dental conditions; seriousness, preventability, and treatability of dental conditions; and satisfaction with dentists, practices, and other dental conditions. (Authors/CJ)

  20. Clinical evaluation of the 3M Littmann Electronic Stethoscope Model 3200 in 150 cats.

    PubMed

    Blass, Keith A; Schober, Karsten E; Bonagura, John D; Scansen, Brian A; Visser, Lance C; Lu, Jennifer; Smith, Danielle N; Ward, Jessica L

    2013-10-01

    Detection of murmurs and gallops may help to identify cats with heart disease. However, auscultatory findings may be subject to clinically relevant observer variation. The objective of this study was to evaluate an electronic stethoscope (ES) in cats. We hypothesized that the ES would perform at least as well as a conventional stethoscope (CS) in the detection of abnormal heart sounds. One hundred and fifty consecutive cats undergoing echocardiography were enrolled prospectively. Cats were ausculted with a CS (WA Tycos Harvey Elite) by two observers, and heart sounds were recorded digitally using an ES (3M Littmann Stethoscope Model 3200) for off-line analysis. Echocardiography was used as the clinical standard method for validation of auscultatory findings. Additionally, digital recordings (DRs) were assessed by eight independent observers with various levels of expertise, and compared using interclass correlation and Cohen's weighted kappa analyses. Using the CS, a heart murmur (n = 88 cats) or gallop sound (n = 17) was identified in 105 cats, whereas 45 cats lacked abnormal heart sounds. There was good total agreement (83-90%) between the two observers using the CS. In contrast, there was only moderate agreement (P <0.001) between results from the CS and the DRs for murmurs, and poor agreement for gallops. The CS was more sensitive compared with the DRs with regard to murmurs and gallops. Agreement among the eight observers was good-to-excellent for murmur detection (81%). In conclusion, DRs made with the ES are less sensitive but comparably specific to a CS at detecting abnormal heart sounds in cats.

  1. Qualification Of Kapton Pretreatment Process Using 3M Scotch Weld 2216 For Solar Panel Application

    NASA Astrophysics Data System (ADS)

    Swamy, B. R.; Krishna, Priya G.; Venkatesh, K.; Nagendra, H. R.; Nanjundaswamy, T. S.

    2011-10-01

    Substrates for solar arrays intended to be used on satellite systems are generally made of aluminum honeycomb structure sandwiched with Carbon Fiber Reinforced Plastic (CFRP) face skin. Two mil thick KaptonTM sheets are co cured on one side of the aluminum /CFRP composite structure while realizing the substrate panels. This Kapton sheet would serve as an insulator over which solar cell blankets are bonded with suitable adhesive for the satellite solar panels. The satellite solar panels demands highest degree of quality and reliability and one of the prime factors in this regards is the bond strength of adhesive which is used to bond the solar cell blankets. Various methods of pretreatments of Kapton surface are in use for increasing the surface energy, which in turn results in improved bond strengths. These methods generally provide roughened surface of the Kapton which is achieved either by abrasive means like scrubbing the surface using fine silica chip, or plasma etching or alternatively by an additive process wherein suitable polyester, phenolic or other resins are coated on to the Kapton surface to achieve the desired results. For spacecraft solar panel applications at ISRO, polyester resin coating on to the Kapton surface was used as pretreatment prior to adhesive application. This process had provided adequate bond strengths between the solar cells and Kapton. Due to issues related to the supply of the polyester resin material from the vendor alternative methods of pretreatments were explored. In this paper, a novel process developed for Kapton pretreatment is described along with results of relevant qualifications for the satellite solar panel application. This newly developed pretreatment process for Kapton successfully adopts an epoxy based material 3M Scotch weld 2216 which is widely used in spacecraft electronic hardware.

  2. ErbB3 mRNA leukocyte levels as a biomarker for major depressive disorder

    PubMed Central

    2012-01-01

    Background In recent years, the identification of peripheral biomarkers that are associated with psychiatric diseases, such as Major Depressive Disorder (MDD), has become relevant because these biomarkers may improve the efficiency of the differential diagnosis process and indicate targets for new antidepressant drugs. Two recent candidate genes, ErbB3 and Fgfr1, are growth factors whose mRNA levels have been found to be altered in the leukocytes of patients that are affected by bipolar disorder in a depressive state. On this basis, the aim of the study was to determine if ErbB3 and Fgfr1 mRNA levels could be a biomarkers of MDD. Methods We measured by Real Time PCR ErbB3 and Fgfr1 mRNA expression levels in leukocytes of MDD patients compared with controls. Successively, to assess whether ErbB3 mRNA levels were influenced by previous antidepressant treatment we stratified our patients sample in two cohorts, comparing drug-naive versus drug-free patients. Moreover, we evaluated the levels of the transcript in MDD patients after 12 weeks of antidepressant treatment, and in prefrontal cortex of rats stressed and treated with an antidepressant drug of the same class. Results These results showed that ErbB3 but not Fgfr1 mRNA levels were reduced in leukocytes of MDD patients compared to healthy subjects. Furthermore, ErbB3 levels were not affected by antidepressant treatment in either human or animal models Conclusions Our data suggest that ErbB3 might be considered as a biomarker for MDD and that its deficit may underlie the pathopsysiology of the disease and is not a consequence of treatment. Moreover the study supports the usefulness of leukocytes as a peripheral system for identifying biomarkers in psychiatric diseases. PMID:22989054

  3. Initial Operation and Checkout of Stratospheric Aerosol Gas Experiment and Meteor-3M Satellite

    NASA Technical Reports Server (NTRS)

    Habib, Shahid; Makridenko, L.; Chu, W.; Salikhov, R.; Moore, A.; Trepte, C.; Cisewski, M.

    2002-01-01

    Under a joint agreement between the National Aeronautics and Space Agency (NASA) and the Russian Aviation and Space Agency (RASA), the Stratospheric Aerosol Gas Experiment III (SAGE III) instrument was launched in low earth orbit on December 10,2001 aboard the Russian Meteor-3M satellite from the Baikonur Cosmodrome. SAGE III is a spectrometer that measures attenuated radiation in the 282 nm to 1550 nm wavelength range to obtain the vertical profiles of ozone, aerosols, and other chemical species that are critical in studying the trends for the global climate change phenomena. This instrument version is more advanced than any of the previous versions and has more spectral bands, elaborate data gathering and storage, and intelligent terrestrial software. There are a number of Russian scientific instruments aboard the Meteor satellite in addition to the SAGE III instrument. These instruments deal with land imaging and biomass changes, hydro-meteorological monitoring, and helio-geophysical research. This mission was under development for over a period of six years and offered a number of unique technical and program management challenges for both Agencies. SAGE III has a long space heritage, and four earlier versions of this instrument have flown in space for nearly two decades now. In fact, SAGE II, the fourth instrument, is still flying in space on NASA s Earth Radiation Budget Satellite (ERBS), and has been providing important atmospheric data over the last 18 years. It has provided vital ozone and aerosol data in the mid latitudes and has contributed vastly in ozone depletion research. Ball Aerospace built the instrument under Langley Research Center s (LaRC) management. This paper presents innovative approaches deployed by the SAGE III and the Meteor teams in performing the initial on-orbit checkout. It further documents a number of early science results obtained by deploying low risk, carefully coordinated procedures in resolving the serious operational issues

  4. Initial operation and checkout of stratospheric aerosol gas experiment and Meteor-3M satellite

    NASA Astrophysics Data System (ADS)

    Habib, Shahid; Makridenko, Leonid; Chu, William P.; Salikhov, Rashid; Moore, Alvah S., Jr.; Trepte, Charles R.; Cisewski, Michael S.

    2003-04-01

    Under a joint agreement between the National Aeronautics and Space Agency (NASA) and the Russian Aviation and Space Agency (RASA), the Stratospheric Aerosol Gas Experiment III (SAGE III) instrument was launched in low earth orbit on December 10, 2001 aboard the Russian Meteor-3M(1) satellite from the Baikonur Cosmodrome. SAGE III is a spectrometer that measures attenuated radiation in the 282 nm to 1550 nm wavelength range to obtain the vertical profiles of ozone, aerosols, and other chemical species that are critical in studying the trends for the global climate change phenomena. This instrument version is more advanced than any of the previous versions and has more spectral bands, elaborate data gathering and storage, and intelligent terrestrial software. There are a number of Russian scientific instruments aboard the Meteor satellite in addition to the SAGE III instrument. These instruments deal with land imaging and biomass changes, hydro-meteorological monitoring, and helio-geophysical research. This mission was under development for over a period of six years and offered a number of unique technical and program management challenges for both Agencies. SAGE III has a long space heritage, and four earlier versions of this instrument have flown in space for nearly two decades now. In fact, SAGE II, the fourth instrument, is still flying in space on NASA's Earth Radiation Budget Satellite (ERBS), and has been providing important atmospheric data over the last 18 years. It has provided vital ozone and aerosol data in the mid latitudes and has contributed vastly in ozone depletion research. Ball Aerospace built the instrument under Langley Research Center's (LaRC) management. This paper presents the process and approach deployed by the SAGE III and the Meteor teams in performing the initial on-orbit checkout. It further documents a number of early science results obtained by deploying low risk, carefully coordinated procedures in resolving the serious operational

  5. PLANET ENGULFMENT BY {approx}1.5-3 M{sub sun} RED GIANTS

    SciTech Connect

    Kunitomo, M.; Ikoma, M.; Sato, B.; Ida, S.; Katsuta, Y.

    2011-08-20

    Recent radial-velocity surveys for GK clump giants have revealed that planets also exist around {approx}1.5-3 M{sub sun} stars. However, no planets have been found inside 0.6 AU around clump giants, in contrast to solar-type main-sequence stars, many of which harbor short-period planets such as hot Jupiters. In this study, we examine the possibility that planets were engulfed by host stars evolving on the red-giant branch (RGB). We integrate the orbital evolution of planets in the RGB and helium-burning phases of host stars, including the effects of stellar tide and stellar mass loss. Then we derive the critical semimajor axis (or the survival limit) inside which planets are eventually engulfed by their host stars after tidal decay of their orbits. Specifically, we investigate the impact of stellar mass and other stellar parameters on the survival limit in more detail than previous studies. In addition, we make detailed comparisons with measured semimajor axes of planets detected so far, which no previous study has done. We find that the critical semimajor axis is quite sensitive to stellar mass in the range between 1.7 and 2.1 M{sub sun}, which suggests a need for careful comparison between theoretical and observational limits of the existence of planets. Our comparison demonstrates that all planets orbiting GK clump giants that have been detected are beyond the survival limit, which is consistent with the planet-engulfment hypothesis. However, on the high-mass side (>2.1M{sub sun}), the detected planets are orbiting significantly far from the survival limit, which suggests that engulfment by host stars may not be the main reason for the observed lack of short-period giant planets. To confirm our conclusion, the detection of more planets around clump giants, especially with masses {approx}> 2.5M{sub sun}, is required.

  6. Allogenic banking of dental pulp stem cells for innovative therapeutics

    PubMed Central

    Collart-Dutilleul, Pierre-Yves; Chaubron, Franck; De Vos, John; Cuisinier, Frédéric J

    2015-01-01

    Medical research in regenerative medicine and cell-based therapy has brought encouraging perspectives for the use of stem cells in clinical trials. Multiple types of stem cells, from progenitors to pluripotent stem cells, have been investigated. Among these, dental pulp stem cells (DPSCs) are mesenchymal multipotent cells coming from the dental pulp, which is the soft tissue within teeth. They represent an interesting adult stem cell source because they are recovered in large amount in dental pulps with non-invasive techniques compared to other adult stem cell sources. DPSCs can be obtained from discarded teeth, especially wisdom teeth extracted for orthodontic reasons. To shift from promising preclinical results to therapeutic applications to human, DPSCs must be prepared in clinical grade lots and transformed into advanced therapy medicinal products (ATMP). As the production of patient-specific stem cells is costly and time-consuming, allogenic biobanking of clinical grade human leukocyte antigen (HLA)-typed DPSC lines provides efficient innovative therapeutic products. DPSC biobanks represent industrial and therapeutic innovations by using discarded biological tissues (dental pulps) as a source of mesenchymal stem cells to produce and store, in good manufacturing practice (GMP) conditions, DPSC therapeutic batches. In this review, we discuss about the challenges to transfer biological samples from a donor to HLA-typed DPSC therapeutic lots, following regulations, GMP guidelines and ethical principles. We also present some clinical applications, for which there is no efficient therapeutics so far, but that DPSCs-based ATMP could potentially treat. PMID:26328017

  7. Access to Dental Providers in Pennsylvania

    PubMed Central

    Baird, Matthew D.; Baird, Michelle K.; Vesely, Joseph V.

    2016-01-01

    Abstract Ensuring access to dental care, particularly for children, is a significant policy concern in the United States. Many factors affect access on both the provider and patient sides. This study examines an important factor in the ability to access dental care: the distribution and availability of dental health providers. The authors assess providers across the counties of Pennsylvania, primarily using data from the 2013 Survey of Dentists and Dental Hygienists administered by the Pennsylvania Department of Health. To identify possible dental provider shortages in Pennsylvania counties, the authors assessed ten indicators of access to dental providers. They find significant variation in the indicators across Pennsylvania counties. PMID:28083429

  8. Medical insurance for dental sleep medicine.

    PubMed

    Lipsey, Marty R

    2012-04-01

    Over the last 5 to 7 years, dental teams have mastered the art and science of processing dental insurance for their patients but have major difficulties learning how to help their patients when it comes to medical insurance. This article attempts to provide a basic guide for the dental team in coding, billing, and processing of major medical insurance for dental sleep medicine. Although there is certainly a learning curve for the dental team in this endeavor, the "patient and physician friendly" dental sleep medicine practice is a model that will help to assure growth and success.

  9. [The experience of using Filtek Bulk Fill (3M ESPE) - the advantages of bulk fill flowable restoratives].

    PubMed

    Sharova, T N

    2014-01-01

    The paper presents clinical cases illustrating the advantages of bulk fill flowable restoratives, such as Filtek Bulk Fill (3M ESPE). The material showed good clinical results for class I and class II restorations.

  10. Modifications to Langley 0.3-m TCT adaptive wall software for heavy gas test medium, phase 1 studies

    NASA Technical Reports Server (NTRS)

    Murthy, A. V.

    1992-01-01

    The scheme for two-dimensional wall adaptation with sulfur hexafluoride (SF6) as test gas in the NASA Langley Research Center 0.3-m Transonic Cryogenic Tunnel (0.3-m TCT) is presented. A unified version of the wall adaptation software has been developed to function in a dual gas operation mode (nitrogen or SF6). The feature of ideal gas calculations for nitrogen operation is retained. For SF6 operation, real gas properties have been computed using the departure function technique. Installation of the software on the 0.3-m TCT ModComp-A computer and preliminary validation with nitrogen operation were found to be satisfactory. Further validation and improvements to the software will be undertaken when the 0.3-m TCT is ready for operation with SF6 gas.

  11. Risk management in clinical practice. Part 5. Ethical considerations for dental enhancement procedures.

    PubMed

    Ahmad, I

    2010-09-11

    After the demise of the Industrial Age, we currently live in an 'Information Age' fuelled mainly by the Internet, with an ever-increasing medically and dentally literate population. The media has played its role by reporting scientific advances, as well as securitising medical and dental practices. Reality television such as 'Extreme makeovers' has also raised public awareness of body enhancements, with a greater number of people seeking such procedures. To satiate this growing demand, the dental industry has flourished by introducing novel cosmetic products such as bleaching kits, tooth coloured filling materials and a variety of dental ceramics. In addition, one only has to browse through a dental journal to notice innumerable courses and lectures on techniques for providing cosmetic dentistry. The incessant public interest, combined with unrelenting marketing by companies is gradually shifting the balance of dental care from a healing to an enhancement profession. The purpose of this article is to endeavour to answer questions such as, What is aesthetic or cosmetic dentistry? Why do patients seek cosmetic dentistry? Are enhancement procedures a part of dental practice? What, if any, ethical guidelines and constraints apply to elective enhancement procedures? What is the role of the dentist in providing or encouraging this type of 'therapy'? What treatment modalities are available for aesthetic dental treatment?

  12. Costing dental restorations in public sector dental clinics.

    PubMed

    Khairiyah, Abdul Muttalib; Razak, Ishak Abdul; Raja-Latifah, Raja Jalludin; Tan, Bee Siew; Norain, Abu Talib; Noor-Aliyah, Ismail; Natifah, Che Salleh; Rauzi, Ismail

    2009-04-01

    The objective of this study is to share cost analysis methodology and to obtain cost estimates for posterior restorations in public sector dental clinics. Two urban and 2 rural dental clinics in Selangor state were selected. Only cases of 1 posterior restoration per visit by dental officers were included over 6 months. One capsulated amalgam type, 1 capsulated tooth-colored, and 1 non-capsulated tooth-colored material were selected. A clinical pathway form was formulated to collect data per patient. Annual capital and recurrent expenditures were collected per clinic. The mean cost of an amalgam restoration was RM 30.96 (sdRM 7.86); and tooth-colored restorations ranged from RM 33.00 (sdRM 8.43) to RM 41.10 (sdRM 10.61). Wherein 1 USD = RM 2.8. Restoration costs were 35% to 55% higher in clinics in rural areas than in urban areas. The findings demonstrate economy of scale for clinic operation and restoration costs with higher patient load. Costs per restoration were higher in rural than in urban dental clinics. More studies are recommended to address the dearth of dental costs data in Malaysia.

  13. Component analysis of dental porcelain for assisting dental identification.

    PubMed

    Aboshi, H; Takahashi, T; Komuro, T

    2006-12-01

    The fluorescence of porcelain crowns recovered from the mouth of an unknown murder victim, and several control porcelain samples, were examined by fluorescent examination lamps. The fluorescence from two of the control samples was quite similar to that from the porcelain crowns recovered from the victim. To increase the objectivity of the results by quantitative analysis, the composition of each porcelain crown and control sample was also evaluated by wave dispersion X-ray microanalyser. The elements detected from the porcelain crowns of the victim matched those of two of the porcelain samples. Later, the antemortem dental records and radiographs of the victim were obtained through a dentist, who had recognized the name of the porcelain manufacturer in a postmortem dental information request placed on the Japanese Dental Association web page. Although component analysis of dental porcelain may be an effective means of assisting dental identification, a more rapid and non-destructive analysis for detecting the elements is required. The energy dispersive X-ray fluorescence (EDXRF) spectrometer was used for a pilot study of identification of porcelain composition.

  14. Dental self-care among dentate adults: contrasting problem-oriented dental attenders and regular dental attenders.

    PubMed

    Gilbert, G H; Stoller, E P; Duncan, R P; Earls, J L; Campbell, A M

    2000-01-01

    Self-care behaviors are common and can act as substitutes for or supplements to formal health care services. We tested the hypothesis that problem-oriented dental attenders (POAs) report more dental self-care behaviors than do regular dental attenders (RAs), presumably as a substitute for professional care. The Florida Dental Care Study is a longitudinal cohort study of changes in oral health, in which we measured dental self-care behaviors related to three common dental problems: toothache pain, bleeding gums, and tooth loss. Despite using less dental care, POAs were less likely to report "conventional" methods as means to prevent the three dental problems; however, they were more likely to report that homemade remedies, topical medications, or mouthwashes were ways to prevent or treat these problems. POAs were also more likely to believe that "nothing can be done" to prevent these problems. Additionally, POAs had more negative dental attitudes, used less dental care during follow-up, had more dental disease, were the only persons who extracted at least one of their own teeth, and were more likely to use tobacco. With the exception of dental self-extractions, no single self-care belief or behavior distinguished POAs from RAs, nor were POAs likely to have different explanations for dental problems. Instead, the pattern was one of modest differences on a number of items. Although POAs use less dental care, they do not compensate by employing more "conventional" dental self-care behaviors, but report being more likely to employ "unconventional" behaviors. They also are more likely to believe that nothing can be done to prevent dental problems.

  15. Dental Students' Perceptions of Learning Value in PBL Groups with Medical and Dental Students Together versus Dental Students Alone.

    PubMed

    Amin, Maryam; Zulla, Rosslynn; Gaudet-Amigo, Gisele; Patterson, Steven; Murphy, Natalie; Ross, Shelley

    2017-01-01

    At a dental school in Canada, problem-based learning (PBL) sessions were restructured from an integrated dental-medical model to a separate dental model, resulting in three groups of students available for study: those who had participated in the two-year dental and medical combined, the one-year dental and medical combined, the one-year dental alone, and the two-year dental alone. The aim of this qualitative study was to examine the extent to which the PBL structure affected the dental students' perceptions of the learning value of PBL in the different models. A total of 34 first-, second-, and third-year dental students participated in six focus groups in May and June 2011 (34% of students in those total classes). Semistructured questions explored their experiences in the different PBL structures. The interviews were recorded and transcribed verbatim, and thematic analysis was employed. The results showed positive and negative perceptions for both the combined dental and medical settings and the settings with dental students alone. For students in the combined PBL groups, positive perceptions included gaining information from medical peers, motivation to learn, and interdisciplinary collaborations. The negative perceptions mainly related to irrelevant content, dominating medical students, and ineffective preceptors. Members of the separate dental groups were more positive about the content and felt a sense of belonging. They appreciated the dental preceptors but were concerned about the inadequacy of their medical knowledge. Overall, the dental students valued the combined PBL experience and appreciated the opportunity to learn with their medical colleagues. Close attention, however, must be paid to PBL content and the preceptor's role to optimize dental students' experience in combined medical and dental groups.

  16. Saliva and dental plaque.

    PubMed

    Rudney, J D

    2000-12-01

    Dental plaque is being redefined as oral biofilm. Diverse overlapping microbial consortia are present on all oral tissues. Biofilms are structured, displaying features like channels and projections. Constituent species switch back and forth between sessile and planktonic phases. Saliva is the medium for planktonic suspension. Several major functions can be defined for saliva in relation to oral biofilm. It serves as a medium for transporting planktonic bacteria within and between mouths. Bacteria in transit may be vulnerable to negative selection. Salivary agglutinins may prevent reattachment to surfaces. Killing by antimicrobial proteins may lead to attachment of dead cells. Salivary proteins form conditioning films on all oral surfaces. This contributes to positive selection for microbial adherence. Saliva carries chemical messengers which allow live adherent cells to sense a critical density of conspecifics. Growth begins, and thick biofilms may become resistant to antimicrobial substances. Salivary macromolecules may be catabolized, but salivary flow also may clear dietary substrates. Salivary proteins act in ways that benefit both host and microbe. All have multiple functions, and many do the same job. They form heterotypic complexes, which may exist in large micelle-like structures. These issues make it useful to compare subjects whose saliva functions differently. We have developed a simultaneous assay for aggregation, killing, live adherence, and dead adherence of oral species. Screening of 149 subjects has defined high killing/low adherence, low killing/high adherence, high killing/high adherence, and low killing/low adherence groups. These will be evaluated for differences in their flora.

  17. Medicaid dental coverage alone may not lower rates of dental emergency department visits.

    PubMed

    Fingar, Kathryn R; Smith, Mark W; Davies, Sheryl; McDonald, Kathryn M; Stocks, Carol; Raven, Maria C

    2015-08-01

    Medicaid was expanded to millions of individuals under the Affordable Care Act, but many states do not provide dental coverage for adults under their Medicaid programs. In the absence of dental coverage, patients may resort to costly emergency department (ED) visits for dental conditions. Medicaid coverage of dental benefits could help ease the burden on the ED, but ED use for dental conditions might remain a problem in areas with a scarcity of dentists. We examined county-level rates of ED visits for nontraumatic dental conditions in twenty-nine states in 2010 in relation to dental provider density and Medicaid coverage of nonemergency dental services. Higher density of dental providers was associated with lower rates of dental ED visits by patients with Medicaid in rural counties but not in urban counties, where most dental ED visits occurred. County-level Medicaid-funded dental ED visit rates were lower in states where Medicaid covered nonemergency dental services than in other states, although this difference was not significant after other factors were adjusted for. Providing dental coverage alone might not reduce Medicaid-funded dental ED visits if patients do not have access to dental providers.

  18. Differential diagnosis of dental fluorosis made by undergraduate dental students

    PubMed Central

    Rigo, Lilian; Lodi, Leodinei; Garbin, Raíssa Rigo

    2015-01-01

    ABSTRACT Objective To check knowledge of undergraduate dental students to make diagnosis of dental fluorosis with varying degrees of severity and choose its appropriate treatment. Methods Data were collected using a semi-structured questionnaire addressing knowledge of undergraduates based on ten images of mouths presenting enamel changes. Results Only three images were correctly diagnosed by most undergraduates; the major difficulty was in establishing dental fluorosis severity degree. Conclusion Despite much information about fluorosis conveyed during the Dentistry training, as defined in the course syllabus, a significant part of the students was not able to differentiate it from other lesions; they did not demonstrate expertise as to defining severity of fluorosis and indications for treatment, and could not make the correct diagnosis of enamel surface changes. PMID:26761552

  19. Curriculum Guidelines for Clinical Dental Hygiene.

    ERIC Educational Resources Information Center

    Journal of Dental Education, 1985

    1985-01-01

    The American Association of Dental Schools curriculum guidelines for clinical dental hygiene include definitions, notes on the interrelationship of courses, an overview of course objectives, and suggested primary educational goals, prerequisites, core content, specific objectives, sequencing, faculty, and facilities. (MSE)

  20. American Academy of Dental Sleep Medicine

    MedlinePlus

    ... Dentist Applications Now Accepted Join Us in Boston! Membership Join the American Academy of Dental Sleep Medicine ... and more. View Member Benefits... Join Now Renew Membership Diplomate Certification The American Board of Dental Sleep ...

  1. Curricular Guidelines for Teaching Dental Anatomy.

    ERIC Educational Resources Information Center

    Okeson, Jeffrey; Buckman, James

    1981-01-01

    Guidelines developed by the Section on Dental Anatomy and Occlusion of the American Association of Dental Schools for use by individual educational institutions as curriculum development aids are provided. (MLW)

  2. Dental Health Education: Rhetoric or Reality?

    ERIC Educational Resources Information Center

    Taub, Alyson

    1982-01-01

    Suggestions for facilitating dental health education programs in public schools include: (1) determining who will be responsible for dental health education; (2) involving parents; (3) using community health resources; and (4) assessing the results of programs. (JN)

  3. National Institute of Dental and Craniofacial Research

    MedlinePlus

    ... Internships for... High School and College Students Recent College Graduates Dental and Medical Students See All Careers & Training Careers Job Openings Careers in Dental Research Loan Repayment Programs NIH Loan Repayment Programs A–Z ...

  4. Financing dental care: trends in public and private expenditures for dental services.

    PubMed

    Bailit, Howard; Beazoglou, Tryfon

    2008-04-01

    This article examines the financing of dental care in the United States. The major issues addressed include the amount and sources of funds, the reasons for increased dental care expenditures, the comparison of dental care with other medical care expenditures, the policy implications of current trends, and some cautious predictions about the financing of dental care in the next 10 to 20 years. The supply of dental services is expected to increase substantially in the next 10 to 20 years with more dental school graduates, a new midlevel practitioner, and greater use of allied dental health personnel. Whether the supply of services will grow faster than the demand for care is unknown.

  5. Aesthetic management of dental fluorosis.

    PubMed

    Khandelwal, Vishal; Nayak, Ullal Anand; Nayak, Prathibha Anand; Ninawe, Nupur

    2013-05-22

    Significant numbers of patients visiting the paediatric dental clinics have aesthetically objectionable brown stains and desire treatment for them. Intrinsic tooth discolouration can be a significant aesthetic, and in some instances, functional, problem. Dental fluorosis, tetracycline staining, localised and chronological hypoplasia, and both amelogenesis and dentinogenesis imperfecta can all produce a cosmetically unsatisfactory dentition. The aetiology of intrinsic discolouration of enamel may sometimes be deduced from the patient's history, and one factor long associated with the problem has been a high level of fluoride intake. Optimal use of topical fluorides leads to a decrease in the caries prevalence but may show an increase in the prevalence of fluorosis staining because of metabolic alterations in the ameloblasts, causing a defective matrix formation and improper calcification. A 12-year-old male patient was screened at the dental clinic for routine dental care. He wanted us to remove and/or minimise the noticeable brown/yellow staining of his teeth. He requested the least invasive and most cost-effective treatment to change his smile. Various treatment modalities are present for the treatment of fluorosis stains. This report discusses the microabrasion technique in the patient having dental fluorosis.

  6. Dental surgery in ancient Egypt.

    PubMed

    Blomstedt, Patric

    2013-01-01

    Many different surgical procedures have over the years been attributed to the ancient Egyptians. This is also true regarding the field of dental surgery. The existence of dentists in ancient Egypt is documented and several recipes exist concerning dental conditions. However, no indications of dental surgery are found in the medical papyri or in the visual arts. Regarding the osteological material/mummies, the possible indications of dental surgery are few and weak. There is not a single example of a clear tooth extraction, nor of a filling or of an artificial tooth. The suggested examples of evacuation of apical abscesses can be more readily explained as outflow sinuses. Regarding the suggested bridges, these are constituted of one find likely dating to the Old Kingdom, and one possibly, but perhaps more likely, dating to the Ptolemaic era. Both seem to be too weak to have served any possible practical purpose in a living patient, and the most likely explanation would be to consider them as a restoration performed during the mummification process. Thus, while a form of dentistry did certainly exist in ancient Egypt, there is today no evidence of dental surgery.

  7. Aesthetic management of dental fluorosis

    PubMed Central

    Khandelwal, Vishal; Nayak, Ullal Anand; Nayak, Prathibha Anand; Ninawe, Nupur

    2013-01-01

    Significant numbers of patients visiting the paediatric dental clinics have aesthetically objectionable brown stains and desire treatment for them. Intrinsic tooth discolouration can be a significant aesthetic, and in some instances, functional, problem. Dental fluorosis, tetracycline staining, localised and chronological hypoplasia, and both amelogenesis and dentinogenesis imperfecta can all produce a cosmetically unsatisfactory dentition. The aetiology of intrinsic discolouration of enamel may sometimes be deduced from the patient's history, and one factor long associated with the problem has been a high level of fluoride intake. Optimal use of topical fluorides leads to a decrease in the caries prevalence but may show an increase in the prevalence of fluorosis staining because of metabolic alterations in the ameloblasts, causing a defective matrix formation and improper calcification. A 12-year-old male patient was screened at the dental clinic for routine dental care. He wanted us to remove and/or minimise the noticeable brown/yellow staining of his teeth. He requested the least invasive and most cost-effective treatment to change his smile. Various treatment modalities are present for the treatment of fluorosis stains. This report discusses the microabrasion technique in the patient having dental fluorosis. PMID:23704468

  8. Thalassemias and their dental implications.

    PubMed

    Cutando Soriano, Antonio; Gil Montoya, José Antonio; López-González Garrido, Juan de Dios

    2002-01-01

    Thalassemias constitute a form of anemia that pose clear problems in relation to dental treatment. Dental professionals must be aware of the treatment adaptations required in patients with severe forms of beta-thalassemia. Until medical research is able to afford a definitive solution to these diseases (thereby greatly simplifying the dental management of such patients), effort will continue to center on the improvement of available therapeutic modalities, with the aim of obtaining effective and inexpensive oral chelators and drugs that either individually or in combination allow increases in fetal hemoglobin levels. Undoubtedly, the use of such measures together with serial blood transfusions has made it possible for an ever increasing number of patients with beta-thalassemia to reach adult age, where the provision of integral rather than merely palliative dental treatment must be seriously considered. At present, the clinical orofacial manifestations caused by the erythroid mass expanding the facial bones - resulting in dental malocclusions and protrusions tend to be less intense as a result of early medical treatment. In the future, gene therapy may be expected to allow a normal facial appearance thanks to complete healing of the patient.

  9. Sedation in Japanese dental schools.

    PubMed Central

    Morse, Zac; Sano, Kimito; Fujii, Kazuyuki; Kanri, Tomio

    2004-01-01

    There is very little information about the practice of sedation in Japan. Despite the remarkable advances in dentistry, fear and anxiety continue to be significant deterrents for seeking dental services. Most dental procedures can fortunately be undertaken with the aid of sedation. A comprehensive survey of all the dental schools in Japan was carried out to determine what sedation practices were used in Japan. All 29 dental schools in Japan possessed a dedicated department of anesthesiology at the time of this survey. The survey attempted to determine the specific sedation methods (techniques, routes of administration, and agents used in sedation) as well as practices (monitoring, fasting, location, education, and fees involved in sedation). The results indicate that there was a broad range in sedation practices. The Japanese Dental Society of Anesthesiology may wish to examine the findings of this study and may wish to formulate guidelines appropriate for the practice of sedation in Japan. Others may also wish to compare their own practices with those of Japan. PMID:15497299

  10. Sozodont powder dentifrice and Mrs. Winslow's Soothing Syrup: dental nostrums.

    PubMed

    Christen, A G; Christen, J A

    2000-11-01

    The Great Patent Medicine Era (1865-1907) was the golden age of secret remedies--quack, non-prescription medicinal products, sold over-the-counter. Making outrageous and unsubstantiated claims, the makers of dental nostrums purported to effectively treat stained teeth, bad breath, diseased gums, toothache and teething discomfort. No proof was required to substantiate the safety and effectiveness of these concoctions. Advertisements for patent medicines were widespread, appearing in newspapers, almanacs, magazines, trade cards and multiple other media forms. Many dental patent medicines contained acids, abrasive substances, alcohol and/or narcotics, such as heroin, cocaine and morphine. Sozodont Tooth Powder, the most widely promoted and successful dentifrice of this era, claimed to "harden and invigorate the gums, purify and perfume the breath and beautify and preserve the teeth from youth to old age." Early dental researchers found that this remedy contained harsh ingredients (such as acid, sharp abrasives and astringents) which could destroy tooth substance. Mrs. Winslow's Soothing Syrup, an extremely popular dental nostrum, was intended to quiet a fretful child during the teething process. However, it contained generous levels of alcohol and morphine sulfate which could cause coma, addiction or death in an infant. Although somewhat chemically altered, these two products were eventually removed from the market in the 1930s.

  11. 2D and 3D Ultrasonographic Evaluation of Fetal Midface Hypoplasia in Two Cases with 3-M Syndrome.

    PubMed

    Vimercati, A; Chincoli, A; de Gennaro, A C; DʼAddario, V; Cicinelli, E

    2016-07-01

    This paper highlights the utility of 2D and 3D ultrasonography in the prenatal diagnosis of facial dysmorphisms suggestive of very rare syndromes such as 3-M syndrome. Two pregnant women at risk for fetal skeletal dysplasias were referred to our clinic for 2D/3D ultrasound scan in the second trimester of pregnancy. Only one of the patients had a familial history of 3-M syndrome. Karyotyping and genetic testing of abortion material were performed in both cases. 2D ultrasonography revealed growth retardation of the long bones in both cases. In the case without a familial history of the syndrome, 2D and 3D ultrasonography showed an absence of nasal bones and a flat malar region suggestive of 3-M syndrome, although the difficult differential diagnosis included other dysmorphic growth disorders with prenatal onset. The karyotype was normal but the pregnancy was terminated in both cases. Postmortem examination confirmed 3-M syndrome as indicated by prenatal findings. In high-risk cases with a familial history of 3-M syndrome, prenatal diagnosis of 3-M syndrome is possible by analyzing fetal DNA. In the absence of risk, a definitive prenatal diagnosis is often not possible but may be suspected in the presence of shortened long bones, normal head size and typical flattened malar region (midface hypoplasia) shown on complementary 2D and 3D sonograms. 2D and 3D ultrasonography has been shown to offer reliable information for the prenatal study of skeletal and facial anomalies and can be useful if there is a suspicion of 3-M syndrome in a pregnancy not known to be at risk.

  12. 2D and 3D Ultrasonographic Evaluation of Fetal Midface Hypoplasia in Two Cases with 3-M Syndrome

    PubMed Central

    Vimercati, A.; Chincoli, A.; de Gennaro, A. C.; DʼAddario, V.; Cicinelli, E.

    2016-01-01

    This paper highlights the utility of 2D and 3D ultrasonography in the prenatal diagnosis of facial dysmorphisms suggestive of very rare syndromes such as 3-M syndrome. Two pregnant women at risk for fetal skeletal dysplasias were referred to our clinic for 2D/3D ultrasound scan in the second trimester of pregnancy. Only one of the patients had a familial history of 3-M syndrome. Karyotyping and genetic testing of abortion material were performed in both cases. 2D ultrasonography revealed growth retardation of the long bones in both cases. In the case without a familial history of the syndrome, 2D and 3D ultrasonography showed an absence of nasal bones and a flat malar region suggestive of 3-M syndrome, although the difficult differential diagnosis included other dysmorphic growth disorders with prenatal onset. The karyotype was normal but the pregnancy was terminated in both cases. Postmortem examination confirmed 3-M syndrome as indicated by prenatal findings. In high-risk cases with a familial history of 3-M syndrome, prenatal diagnosis of 3-M syndrome is possible by analyzing fetal DNA. In the absence of risk, a definitive prenatal diagnosis is often not possible but may be suspected in the presence of shortened long bones, normal head size and typical flattened malar region (midface hypoplasia) shown on complementary 2D and 3D sonograms. 2D and 3D ultrasonography has been shown to offer reliable information for the prenatal study of skeletal and facial anomalies and can be useful if there is a suspicion of 3-M syndrome in a pregnancy not known to be at risk. PMID:27453585

  13. Coordinated observations of F region 3 m field-aligned plasma irregularities associated with medium-scale traveling ionospheric disturbances

    NASA Astrophysics Data System (ADS)

    Lin, F. F.; Wang, C. Y.; Su, C. L.; Shiokawa, K.; Saito, S.; Chu, Y. H.

    2016-04-01

    Three meter field-aligned irregularities (3 m FAIs) associated with medium-scale traveling ionospheric disturbances (MSTIDs) that occurred on 5 February 2008 were observed by using the Chung-Li 52 MHz coherent scatter radar. Interferometry measurements show that the plasma structures responsible for the 3 m FAI echoes are in a clumpy shape with a horizontal dimension of about 10-78 km in a height range of 220-300 km. In order to investigate the dynamic behaviors of the plasma irregularities at different scales in the bottomside of F region, the VHF radar echo structures from the 3 m FAIs combined with the 630 nm airglow images provided by the Yonaguni all-sky imager are compared and analyzed. The results show that the radar echoes were located at the west edge of the depletion zones of the 630 nm airglow image of the MSTIDs. The bulk echo structures of the 3 m FAIs drifted eastward at a mean trace velocity of about 30 m/s that is in general agreement with the zonal trace velocity of the MSTIDs shown in the 630 nm airglow images. These results suggest that the observed F region 3 m FAIs for the present case can be regarded as the targets that are frozen in the local region of the MSTIDs. In addition, the radar-observed 3 m FAI echo intensity and spectral width bear high correlations to the percentage variations of the 630 nm emission intensity. These results seem to suggest that through the nonlinear turbulence cascade process, the MSTID-associated 3 m FAIs are very likely generated from the kilometer-scale plasma irregularities with large amplitude excited by the gradient drift instability.

  14. P3 mAb: An Immunogenic Anti-NeuGcGM3 Antibody with Unusual Immunoregulatory Properties.

    PubMed

    Martínez, Darel; Rodríguez, Nely; Griñán, Tania; Rondón, Teresa; Vázquez, Ana María; Pérez, Rolando; Hernández, Ana María

    2012-01-01

    P3 is a murine IgM mAb that recognize N-glycosylated gangliosides, sulfatides, and antigens expressed in melanoma, breast, and lung human tumors. This antibody has the ability to trigger an IgG antibody response in the syngeneic BALB/c model, even when it is administered in the absence of adjuvant or carrier protein. The mechanism by which the P3 mAb, a self-immunoglobulin, induce this immune response in the absence of co-stimulatory or classical danger signals is still unknown. In the present paper we show that the high immunogenicity of P3 mAb depends not only on CD4 but also on CD8(+) T cells, since the depletion of CD8(+) or CD4(+) T cells led to the loss of P3 mAb immunogenicity in the syngeneic model. Furthermore, the immunization with P3 mAb enhanced the recovery of the CD8(+) T cell population in mice treated with an anti-CD8a antibody. Additionally, the immunization with P3 mAb restored the capacity of immunosuppressed mice to reject allogeneic tumors, a mechanism mediated by the action of CD8(+) T cells. Finally, in mice with cyclophosphamide induced lymphopenia, the administration of P3 mAb accelerated the recovery of both CD4(+) and CD8(+) T cells. These results show new possibilities for B and CD8(+) T cells interactions during the immune response elicited by a self-protein. Furthermore they point to P3 mAb as a potential interesting candidate for the treatment of immunosuppressed patients.

  15. [Dental health: relationship between dental caries and food consumption].

    PubMed

    González Sanz, Angel Miguel; González Nieto, Blanca Aurora; González Nieto, Esther

    2013-07-01

    Although the reduction and prevalence of dental caries in many countries has been largely associated with the use of fluorine and improving dental hygiene, eating habits also play a role in the development of caries. Fermentable carbohydrates characteristics of the food, rate of consumption, food protectors, the quality and quantity of saliva indices that determine the remineralization of teeth are factors to be considered. All these elements are analyzed through the sociodemographic, behavioral, physical and biological environment directly or indirectly with diet and caries.

  16. Diagnosis and management of dental wear.

    PubMed

    Harpenau, Lisa A; Noble, Warden H; Kao, Richard T

    2011-04-01

    Dental wear is loss of tooth structure resulting from erosion, attrition, abrasion, and, possibly, abfraction. Clinical/experimental data suggest no single damaging mechanism but rather simultaneous interaction of these destructive processes. The most important interaction is abrasion/attrition potentiated by dental erosion. Awareness of this pathosis is not well-appreciated by the public and dental professionals because the signs may be subtle. This article focuses on the recognition, diagnosis, and management of dental wear.

  17. Patient Satisfaction in Military Dental Treatment Facilities

    DTIC Science & Technology

    2006-03-07

    related to technical expertise, Crall and Morris (1988) and Abrams, Ayers and Vogt-Petterson (1986) found that patient satisfaction was not well ...mission of the Army Dental Care Dental Patient Satisfaction 93 System. Dental emergencies in deployed military populations have been well documented...that choice. The ratings of the beliefs about the care received were high as well . Mean scores on the seven belief questions Dental Patient Satisfaction

  18. Fluoride release and recharge abilities of contemporary fluoride-containing restorative materials and dental adhesives.

    PubMed

    Dionysopoulos, Dimitrios; Koliniotou-Koumpia, Eugenia; Helvatzoglou-Antoniades, Maria; Kotsanos, Nikolaos

    2013-01-01

    The aim of this study was to evaluate the fluoride release of five fluoride-releasing restorative materials and three dental adhesives, before and after NaF solution treatment. Five restorative materials (Fuji IX GP, GC Corp.; Ketac N100, 3M ESPE; Dyract Extra, Dentsply; Beautifil II, Shofu Inc.; Wave, SDI) and three dental adhesives (Stae, SDI; Fluorobond II - Shofu Inc.; Prime & Bond NT, Dentsply) were investigated before and after NaF solution treatment. A fluoride ion-selective electrode was to measure fluoride concentrations. During the 86-day period before NaF solution treatment, Fuji IX GP released the highest amount of fluoride among the restorative materials while Prime & Bond NT was the highest among the dental adhesives. After NaF solution treatment, Fuji IX GP again ranked the highest in fluoride release among the restorative materials while Fluorobond II ranked the highest among dental adhesives. It was concluded that the compositions and setting mechanisms of fluoride-containing dental materials influenced their fluoride release and recharge abilities.

  19. Measurement of particle concentrations in a dental office.

    PubMed

    Sotiriou, Maria; Ferguson, Stephen F; Davey, Mark; Wolfson, Jack M; Demokritou, Philip; Lawrence, Joy; Sax, Sonja N; Koutrakis, Petros

    2008-02-01

    Particles in a dental office can be generated by a number of instruments, such as air-turbine handpieces, low-speed handpieces, ultrasonic scalers, bicarbonate polishers, polishing cups, as well as drilling and air sprays inside the oral cavity. This study examined the generation of particles during dental drilling and measured particle size, mass, and trace elements. The air sampling techniques included both continuous and integrated methods. The following particle continuous measurements were taken every minute: (1) size-selective particle number concentration (Climet); (2) total particle number concentration (PTRAK), and; (3) particle mass concentration (DustTrak). Integrated particle samples were collected for about 5 h on each of five sampling days, using a PM(2.5) sampler (ChemComb) for elemental/organic carbon analysis, and a PM(10) sampler (Harvard Impactor) for mass and elemental analyses. There was strong evidence that these procedures result in particle concentrations above background. The dental procedures produced number concentrations of relatively small particles (<0.5 microm) that were much higher than concentrations produced for the relatively larger particles (>0.5 microm). Also, these dental procedures caused significant elevation above background of certain trace elements (measured by X-ray fluorescence) but did not cause any elevation of elemental carbon (measured by thermal optical reflectance). Dental drilling procedures aerosolize saliva and products of drilling, producing particles small enough to penetrate deep into the lungs. The potential health impacts of the exposure of dental personnel to such particles need to be evaluated. Increased ventilation and personal breathing protection could be used to minimize harmful effects.

  20. Renewing professionalism in dental education: overcoming the market environment.

    PubMed

    Masella, Richard S

    2007-02-01

    The most important mission of dental education is development of student professionalism. It is only within the context of professionalism that specialized knowledge and technical expertise find meaning. Altruism, integrity, caring, community focus, and commitment to excellence are attributes of professionalism. Its backbone is the obligation of service to people before service to self--a social contract. Professionalism can and should be acquired by targeted interventions, not as an assumed by-product of dental education. Top-down, rule-based professionalism is contrasted with its experience-based, mentor-mediated, socially driven counterpart. Moral principles are inherent in professional development and the professional way of life. Unfortunately, American society, including higher education, glorifies a market mentality centered on expansion and profit. Through formal and hidden curricula, dental schools send mixed messages to students about the importance of professionalism. Institutional consensus on professionalism should be developed among faculty, administration, and students through passionate advocacy and careful analysis of dentistry's moral convictions. The consensus message should communicate to stakeholders that morality and ethics "really count." Maximum student exposure to faculty exemplars, substantial service-learning experiences, and portfolio use are likely to enhance professionalism, which should be measured for every student, every semester, along with faculty and institutional assessment. Research reveals a significant relationship between levels of student moral reasoning and measures of clinical performance and shows that moral reasoning ability can be enhanced in dental students. Valid and reliable surveys exist to assess student moral reasoning. Documented student unprofessional behavior is a predictor of future state professional board disciplinary action against practitioners, along with low admissions test scores and course failures in

  1. Developing Teaching Expertise in Dental Education

    ERIC Educational Resources Information Center

    Lyon, Lucinda J.

    2009-01-01

    This exploratory study was designed to develop a baseline model of expertise in dental education utilizing the Dreyfus and Dreyfus continuum of skill acquisition. The goal was the development of a baseline model of expertise, which will contribute to the body of knowledge about dental faculty skill acquisition and may enable dental schools to…

  2. Dental Assisting Course. Bilingual Vocational Instructional Materials.

    ERIC Educational Resources Information Center

    Lopez-Cox, Guadalupe

    This course in dental assisting, one of a series of bilingual English-Spanish vocational education courses, is designed to prepare the student to assist the dentist at the chairside in the dental operatory, to perform reception and clerical functions, and to carry out selected dental laboratory work. The course covers an introduction to the…

  3. First-Aid Algorithms in Dental Avulsion

    ERIC Educational Resources Information Center

    Baginska, Joanna; Wilczynska-Borawska, Magdalena

    2012-01-01

    Almost one fourth of traumatic dental injuries occur at schools or in their surroundings. Prevalence of tooth avulsion varies from 0.5% to 16% of all cases of dental trauma. Children with dental avulsion may seek help from school nurses so they should be able to provide first-aid treatment. However, many studies showed that the general level of…

  4. A Cognitive Task Analysis for Dental Hygiene.

    ERIC Educational Resources Information Center

    Cameron, Cheryl A.; Beemsterboer, Phyllis L.; Johnson, Lynn A.; Mislevy, Robert J.; Steinberg, Linda S.; Breyer, F. Jay

    2000-01-01

    As part of the development of a scoring algorithm for a simulation-based dental hygiene initial licensure examination, this effort conducted a task analysis of the dental hygiene domain. Broad classes of behaviors that distinguish along the dental hygiene expert-novice continuum were identified and applied to the design of nine paper-based cases…

  5. Utilization of dental care: An Indian outlook.

    PubMed

    Gambhir, Ramandeep Singh; Brar, Prabhleen; Singh, Gurminder; Sofat, Anjali; Kakar, Heena

    2013-07-01

    Oral health has a significant impact on the quality of life, appearance, and self-esteem of the people. Preventive dental visits help in the early detection and treatment of oral diseases. Dental care utilization can be defined as the percentage of the population who access dental services over a specified period of time. There are reports that dental patients only visit the dentist when in pain and never bother to return for follow-up in most cases. To improve oral health outcomes an adequate knowledge of the way the individuals use health services and the factors predictive of this behavior is essential. The interest in developing models explaining the utilization of dental services has increased; issues like dental anxiety, price, income, the distance a person had to travel to get care, and preference for preservation of teeth are treated as barriers in regular dental care. Published materials which pertain to the use of dental services by Indian population have been reviewed and analyzed in depth in the present study. Dental surgeons and dental health workers have to play an adequate role in facilitating public enlightenment that people may appreciate the need for regular dental care and make adequate and proper use of the available dental care facilities.

  6. 78 FR 32126 - VA Dental Insurance Program

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-29

    ... AFFAIRS 38 CFR Part 17 RIN 2900-AN99 VA Dental Insurance Program AGENCY: Department of Veterans Affairs... rules and procedures for the VA Dental Insurance Program (VADIP), a pilot program that offers premium-based dental insurance to enrolled veterans and certain survivors and dependents of veterans. Under...

  7. Dental disease in children with chronic illness

    PubMed Central

    Foster, H; Fitzgerald, J

    2005-01-01

    We focus on the role of the general paediatrician in promoting the importance of good dental health for all children and in particular those children "at risk". We present preventive measures, evidence based where available, that may improve dental care and promote the role of paediatric dental services in the multidisciplinary management of chronic disease. PMID:15970611

  8. Supply and Demand: Lessons from Dental Medicine?

    ERIC Educational Resources Information Center

    Cohen, D. Walter

    1988-01-01

    Four major factors responsible for trends in applicants to dental school are identified: cost, competition, demographics, and the practicing dentist. The initiation of the Pew National Dental Education Program at the University of Pennsylvania School of Dental Medicine is described. (MLW)

  9. Dental Education at the Crossroads--Summary.

    ERIC Educational Resources Information Center

    Journal of Dental Education, 1995

    1995-01-01

    An Institute of Medicine study concerning dental education's future is summarized. Eight principles guiding the study are outlined, and findings/recommendations in each area (oral health status, dental education's mission, focus on health outcomes, research role, patient care, dental school's role in the university, accreditation, dental…

  10. Issues in Dental Curriculum Development and Change.

    ERIC Educational Resources Information Center

    Tedesco, Lisa A.

    1995-01-01

    An extensive discussion of curriculum reform in dental education looks at the history of dental curriculum since 1926, reviewing major reports and studies and examining systematic attempts to alter the curriculum, both structurally and philosophically. The paper was prepared as background for an Institute of Medicine study of dental education's…

  11. Multilineage potential and proteomic profiling of human dental stem cells derived from a single donor

    SciTech Connect

    Patil, Rajreddy; Kumar, B. Mohana; Lee, Won-Jae; Jeon, Ryoung-Hoon; Jang, Si-Jung; Lee, Yeon-Mi; Park, Bong-Wook; Byun, June-Ho; Ahn, Chun-Seob; Kim, Jae-Won; Rho, Gyu-Jin

    2014-01-01

    Dental tissues provide an alternative autologous source of mesenchymal stem cells (MSCs) for regenerative medicine. In this study, we isolated human dental MSCs of follicle, pulp and papilla tissue from a single donor tooth after impacted third molar extraction by excluding the individual differences. We then compared the morphology, proliferation rate, expression of MSC-specific and pluripotency markers, and in vitro differentiation ability into osteoblasts, adipocytes, chondrocytes and functional hepatocyte-like cells (HLCs). Finally, we analyzed the protein expression profiles of undifferentiated dental MSCs using 2DE coupled with MALDI-TOF-MS. Three types of dental MSCs largely shared similar morphology, proliferation potential, expression of surface markers and pluripotent transcription factors, and differentiation ability into osteoblasts, adipocytes, and chondrocytes. Upon hepatogenic induction, all MSCs were transdifferentiated into functional HLCs, and acquired hepatocyte functions by showing their ability for glycogen storage and urea production. Based on the proteome profiling results, we identified nineteen proteins either found commonly or differentially expressed among the three types of dental MSCs. In conclusion, three kinds of dental MSCs from a single donor tooth possessed largely similar cellular properties and multilineage potential. Further, these dental MSCs had similar proteomic profiles, suggesting their interchangeable applications for basic research and call therapy. - Highlights: • Isolated and characterized three types of human dental MSCs from a single donor. • MSCs of dental follicle, pulp and papilla had largely similar biological properties. • All MSCs were capable of transdifferentiating into functional hepatocyte-like cells. • 2DE proteomics with MALDI-TOF/MS identified 19 proteins in three types of MSCs. • Similar proteomic profiles suggest interchangeable applications of dental MSCs.

  12. DENTAL SERVICES AND ATTITUDES TOWARDS ITS REGULAR UTILIZATION AMONG CIVIL SERVANTS IN IBADAN, NIGERIA

    PubMed Central

    Osuh, M.E.; Oke, G.A.; Asuzu, M.C.

    2014-01-01

    Background: Regular utilization of dental services is key to the attainment of optimal oral health state, an integral component of general health and well being needed for effective productivity by working personnel. Objective: This study assessed the rate and pattern of dental service utilization among civil servants and their attitudes towards its regular use. Methodology: A multi-stage sampling technique was used to select participants from the Federal Secretariat in Ibadan, Nigeria. A structured, standardized, pretested and self-administered questionnaire was utilized to elicit responses on dental services and attitudes towards their regular utilization. Responses to knowledge and attitude questions were scored and categorized. Chi-squared test was used to test associations between variables at 5% level of significance. Results: A total of 400 civil servants participated in the study. Their mean age was 44.0 ±7.3years. Many 291(72.8%) were well informed about dental health care and services, but few 156 (39%) had ever utilized it. Of the utilizers, 32 (20.5%) visited within the previous one year period, while others last visited in more than one year period. Few 17 (10.9%) of the utilizers visited for routine dental checks, 103 (66%) for acute pain relief, while the rest had other dental health care needs. The majority 312 (78.0%) showed positive attitude towards regular dental service utilization and this improved with higher educational attainment, improved level of income, being aware of dental services and having ever utilized it (all p<0.05). Conclusion: Despite the awareness and positive attitude towards regular dental service use, their utilization rate was relatively low, episodic and problem driven. Appropriate oral health promotion strategies to enhance utilization of preventive dental services are strongly recommended for them. PMID:25332695

  13. [Syncope in the dental environment].

    PubMed

    Findler, M; Elad, S; Garfunkel, A; Zusman, S P; Malamed, S F; Galili, D; Kaufman, E

    2002-01-01

    Syncope or Fainting is, by far, the most common emergency situation in the dental practice. Syncope is defined as an abrupt, transient, short term loss of consciousness and postural tone, followed by spontaneous and complete recovery. The pathophysiology of syncope consists of a sudden cessation or decrease in cerebral perfusion. Differential diagnosis of these medical conditions is of paramount importance in uncovering unrecognized systemic diseases. The dental team plays an important role in the process of establishing the correct diagnosis by its ability to recognize and document all the clinical symptoms and signs evident at the time of fainting. The dental surgeon is expected to be familiar with the various etiologies of syncope and should be able to differentiate between them. This article provides the essentials of the diagnostic procedure and an approach to the evaluation of the unconscious patient.

  14. Dental issues in Rett syndrome.

    PubMed

    Janas, Anna; Osica, Piotr

    2015-01-01

    The advancements in science and technology allowed saving the lives of children, who had no chance of survival before. Hence the problem of so called rare diseases, usually genetically determined. It is a new challenge for both the physicians and the health services. These children require a coordinated multi specialist oriented health care, which includes also dentists. This situation is reflected by the case of an 18 years old girl with Rett Syndrome, described by us. In this patient despite numerous visits to various dental practices, no decision of a radical surgical extraction of the tooth has been conducted. In our Department the extraction of teeth 22, 16 and 14 has been performed, as a part of 1 day surgery procedures, thus eliminating the dental infections and pain. Conclusion: Elaboration and introduction into praxis principles of dental care in children and young adults with rare diseases are needed.

  15. Biofilm and dental unit waterlines.

    PubMed

    Szymanska, Jolanta

    2003-01-01

    Aquatic biofilms, which are well-organized communities of microorganisms, are widespread in nature. They constitute a major problem in many environmental, industrial and medical settings. The use of advanced techniques has revealed biofilm structure, formation and ecology. Special attention was given to the build-up of biofilm in dental unit waterlines (DUWLs), which are small-bore flexible plastic tubing to bring water to different handpieces. They are coated with well-established biofilms. Active biofilm is a source of microbial contamination of DUWLs water. The safety of dental treatment requires a good quality of the water used. The knowledge of nature, formation and the ways to eliminate the biofilm is the first step towards reducing health risk, both for patients and dental personnel. The article reviews these issues.

  16. Anisotropic surface melting in lyotropic cubic crystals. Part 1: Pn3m/L1 interface, poor faceting

    NASA Astrophysics Data System (ADS)

    Grenier, J.; Plötzing, T.; Rohe, D.; Pieranski, P.

    2006-02-01

    From experiments with ice or metal crystals, in the vicinity of their crystal/liquid/vapor triple points, it is known that melting of crystals starts on their surfaces and is anisotropic. It is shown here by direct observations under an optical microscope that this anisotropic surface melting phenomenon occurs also in lyotropic systems. In the case of C12EO2/water mixture, it takes place in the vicinity of the peritectic Pn3m/L3/L1 triple point. Above the peritectic triple point, where the Pn3m and L1 phases coexist in the bulk, the surface of a Pn3m-in-L1 crystal is composed of (111)-type facets surrounded by rough surfaces. The angular junction suggests that rough surfaces are wet by a L3-like layer while facets stay “dry”. This is analogous to the pre-melting at rough surfaces in solid crystals. Upon cooling below the peritectic triple point, where L3 and L1 phases coexist in the bulk, a thick layer of the L3 phase grows from the pre-melted, rough Pn3m/L1 interface. Simultaneously, facets stay dry and their radius decreases. In this tri-phasic configuration, stable in a narrow temperature range, the L3/L1 and L3/Pn3m interfaces have shapes of constant mean curvature surfaces having common borders: edges of facets.

  17. Maternal uniparental isodisomy and heterodisomy on chromosome 6 encompassing a CUL7 gene mutation causing 3M syndrome.

    PubMed

    Sasaki, K; Okamoto, N; Kosaki, K; Yorifuji, T; Shimokawa, O; Mishima, H; Yoshiura, K-i; Harada, N

    2011-11-01

    We report a case of segmental uniparental maternal hetero- and isodisomy involving the whole of chromosome 6 (mat-hUPD6 and mat-iUPD6) and a cullin 7 (CUL7) gene mutation in a Japanese patient with 3M syndrome. 3M syndrome is a rare autosomal recessive disorder characterized by severe pre- and postnatal growth retardation that was recently reported to involve mutations in the CUL7 or obscurin-like 1 (OBSL1) genes. We encountered a patient with severe growth retardation, an inverted triangular gloomy face, an inverted triangle-shaped head, slender long bones, inguinal hernia, hydrocele testis, mild ventricular enlargement, and mild mental retardation. Sequence analysis of the CUL7 gene of the patient revealed a homozygous missense mutation, c.2975G>C. Genotype analysis using a single nucleotide polymorphism array revealed two mat-hUPD and two mat-iUPD regions involving the whole of chromosome 6 and encompassing CUL7. 3M syndrome caused by complete paternal iUPD of chromosome 6 involving a CUL7 mutation has been reported, but there have been no reports describing 3M syndrome with maternal UPD of chromosome 6. Our results represent a combination of iUPDs and hUPDs from maternal chromosome 6 involving a CUL7 mutation causing 3M syndrome.

  18. Amino acid derivative-mediated detoxification and functionalization of dual cure dental restorative material for dental pulp cell mineralization.

    PubMed

    Minamikawa, Hajime; Yamada, Masahiro; Iwasa, Fuminori; Ueno, Takeshi; Deyama, Yoshiaki; Suzuki, Kuniaki; Yawaka, Yasutaka; Ogawa, Takahiro

    2010-10-01

    Current dental restorative materials are only used to fill the defect of hard tissues, such as dentin and enamel, because of their cytotoxicity. Therefore, exposed dental pulp tissues in deep cavities must be first covered by a pulp capping material like calcium hydroxide to form a layer of mineralized tissue. However, this tissue mineralization is based on pathological reaction and triggers long-lasting inflammation, often causing clinical problems. This study tested the ability of N-acetyl cysteine (NAC), amino acid derivative, to reduce cytotoxicity and induce mineralized tissue conductivity in resin-modified glass ionomer (RMGI), a widely used dental restorative material having dual cure mechanism. Rat dental pulp cells were cultured on untreated or NAC-supplemented RMGI. NAC supplementation substantially increased the percentage of viable cells from 46.7 to 73.3% after 24-h incubation. Cell attachment, spreading, proliferative activity, and odontoblast-related gene and protein expressions increased significantly on NAC-supplemented RMGI. The mineralization capability of cells, which was nearly suppressed on untreated RMGI, was induced on NAC-supplemented RMGI. These improved behaviors and functions of dental pulp cells on NAC-supplemented RMGI were associated with a considerable reduction in the production of intracellular reactive oxygen species and with the increased level of intracellular glutathione reserves. These results demonstrated that NAC could detoxify and functionalize RMGIs via two different mechanisms involving in situ material detoxification and antioxidant cell protection. We believe that this study provides a new approach for developing dental restorative materials that enables mineralized tissue regeneration.

  19. Dental and Temporomandibular Joint Pathology of the Walrus (Odobenus rosmarus).

    PubMed

    Winer, J N; Arzi, B; Leale, D M; Kass, P H; Verstraete, F J M

    2016-01-01

    Maxillae and/or mandibles from 76 walruses (Odobenus rosmarus) were examined macroscopically according to predefined criteria. The museum specimens were acquired between 1932 and 2014. Forty-five specimens (59.2%) were from male animals, 29 (38.2%) from female animals and two (2.6%) from animals of unknown sex, with 58 adults (76.3%) and 18 young adults (23.7%) included in this study. The number of teeth available for examination was 830 (33.6%); 18.5% of teeth were absent artefactually, 3.3% were deemed to be absent due to acquired tooth loss and 44.5% were absent congenitally. The theoretical complete dental formula was confirmed to be I 3/3, C 1/1, P 4/3, M 2/2, while the most probable dental formula is I 1/0, C 1/1, P 3/3, M 0/0; none of the specimens in this study possessed a full complement of theoretically possible teeth. The majority of teeth were normal in morphology; only five teeth (0.6% of available teeth) were malformed. Only one tooth had an aberrant number of roots and only one supernumerary tooth was encountered. No persistent deciduous teeth were found in any of the young adult or adult specimens, nor were any specimens affected by enamel hypoplasia. The majority of teeth (85.5%) displayed attrition/abrasion. Of the adult and young adult specimens, 90.8% showed some degree of attrition/abrasion on at least one tooth. Tooth fractures were noted in eight walruses, affecting 10.5% of specimens and 1.3% of the total number of teeth, nearly three-quarters of which were maxillary canine teeth (tusks). Three specimens (3.9%), all adult males, displayed overt periapical disease. The majority (99.2%) of dental alveoli did not have bony changes indicative of periodontitis, with only five specimens (6.6%) affected by periodontitis. Lesions consistent with temporomandibular joint osteoarthritis (TMJ-OA) were found in 46 specimens (60.5%) and TMJ-OA was significantly more common in adults than young adults and males than females. Although the clinical

  20. [Autism-friendly dental care].

    PubMed

    Kind, L S; van Gemert-Schriks, M C M; Elhorst, J H

    2016-02-01

    Autism Spectrum Disorder (ASD) occurs in approximately 1% of the Dutch population. Among the group of patients with this disorder, there is a substantial diversity regarding skills, intelligence and treatability. However, there are also common characteristics; people with ASD often have difficulty with social interaction, communication, and exhibit typical patterns of behaviour. Therefore, problems may arise in the various areas of development, such as language development and responding to sensory stimuli. Dental practitioners will also be confronted with individuals with ASD. Care can be significantly improved, considering that negative experiences and dental anxiety are widespread at this time.

  1. Cerebral Palsy: A Dental Update

    PubMed Central

    Sehrawat, Nidhi; Bansal, Kalpana; Chopra, Radhika

    2014-01-01

    ABSTRACT Special and medically compromised patients present a unique population that challenges the dentist’s skill and knowledge. Providing oral care to people with cerebral palsy (CP) requires adaptation of the skills we use everyday. In fact, most people with mild or moderate forms of CP can be treated successfully in the general practice setting. This article is to review various dental considerations and management of a CP patient. How to cite this article: Sehrawat N, Marwaha M, Bansal K, Chopra R. Cerebral Palsy: A Dental Update. Int J Clin Pediatr Dent 2014;7(2):109-118. PMID:25356010

  2. Sonochemical cleaning efficiencies in dental instruments

    NASA Astrophysics Data System (ADS)

    Tiong, T. Joyce; Walmsley, A. Damien; Price, Gareth J.

    2012-05-01

    Ultrasound has been widely used for cleaning purposes in a variety of situations, including in dental practice. Cleaning is achieved through a combination of acoustically driven streaming effects and sonochemical effects arising from the production of inertial cavitation in a liquid. In our work, various dental instruments used for endodontic (root canal) treatment have been evaluated for their efficiency in producing sonochemical effects in an in-vitro cleaning environment. The areas where cavitation was produced were mapped by monitoring chemiluminescence from luminol solutions and this was correlated with their cleaning efficiencies - assessed by the ability to bleach a dye, to form an emulsion by mixing immiscible components and also to remove ink from a glass surface. The results showed good correlation (Pearson's coefficient > 0.9) between the cavitation and cleaning efficiencies, suggesting that the former plays an important role in cleaning. The methods developed and the results will be beneficial in endodontics research in order to optimise future root canal instruments and treatments.

  3. Prototyping a robotic dental testing simulator.

    PubMed

    Alemzadeh, K; Hyde, R A; Gao, J

    2007-05-01

    A parallel robot based on the Stewart platform is being developed to simulate jaw motion and investigate its effect on jaw function to test the wearing away of dental components such as individual teeth, crowns, bridges, full set of dentures, and implant-supported overdentures by controlling chewing motion. The current paper only describes the comparison between an alternative configuration proposed by Xu and the Stewart platform configuration. The Stewart platform was chosen as an ideal structure for simulating human mastication as it is easily assembled, has high rigidity, high load-carrying capacity, and accurate positioning capability. The kinematics and singularities of the Stewart platform have been analysed and software developed to (a) test the control algorithms/strategy of muscle movement for the six degree of freedom of mastication cycle and (b) simulate and observe various design options to be able to make the best judgement in product development. The human replica skull has been analysed and reverse engineered with further simplification before integration with the Stewart platform computer-aided design (CAD) to develop the robotic dental testing simulator. Assembly modelling of the reproduced skull was critically analysed for good occlusion in CAD environment. A pulse-width modulation (PWM) circuit plus interface was built to control position and speed of the chosen actuators. A computer numerical control (CNC) machine and wire-electro-discharge machining (wire EDM) were used to manufacture the critical parts such as lower mandible, upper maxilla, and universal joints.

  4. DENTAL HEALTH STATUS AND DENTAL HEALTH SERVICES FOR RURAL YOUTH.

    ERIC Educational Resources Information Center

    DONNELLY, CHARLES J.

    ALTHOUGH DENTAL PROBLEMS ARE COMMON IN BOTH RURAL AND URBAN AREAS, RURAL CHILDREN SEEM TO HAVE MORE DIFFICULTIES. THE REASONS FOR THIS APPEAR TO BE THAT THERE ARE FEWER DENTISTS PER CAPITA IN RURAL AREAS, AND THAT THE RURAL CHILD IS USUALLY EXPOSED TO A WATER SYSTEM LACKING FLUORIDATION, WHICH IS THE MOST EFFECTIVE WAY OF ADMINISTERING FLUORIDES.…

  5. Who is dentally anxious? Concordance between measures of dental anxiety.

    PubMed

    Locker, D; Shapiro, D; Liddell, A

    1996-10-01

    Studies of the prevalence of dental anxiety in general population samples have produced estimates which range from a low of 2.6% to a high of 20.4%. It is not clear whether these reflect real differences among populations or whether they are the result of the use of different measures and different cut-off points. We undertook a large scale mail survey of dental anxiety in a random sample of the adult population living in Metropolitan Toronto designed to assess the performance of and agreement between three measures. These were Corah's DAS, the single item used by Milgrom and colleagues in Seattle and the ten-point fear scale used by Gatchel. These measures and their published cut-off points produced prevalence estimates of 10.9%, 23.4% and 8.2% respectively. While there was a significant association between scores on pairs of measures the agreement between them was far from perfect. Kappa values ranged from 0.37 to 0.56, indicating only fair to moderate agreement beyond chance. There was evidence to indicate that the dentally anxious subjects identified by each measure differed according to certain behavioural and other characteristics. The results of the study suggest the need to revisit the issue of measurement in studies of dental anxiety.

  6. Properties near magnetic instability of heavy-electron compounds Ce3M4Sn13 and La3M4Sn13, with M=Co, Rh and Ru

    NASA Astrophysics Data System (ADS)

    Ślebarski, Andrzej

    2015-02-01

    In this review, we report the thermodynamic, magnetic and electronic transport properties of the skutterudite-related Ce3M4Sn13 and La3M4Sn13 intermetallic compounds with M = Co, Rh and Ru, which display a variety of behaviours. Ce3M4Sn13 exhibit a large increase in C/T with a maximum value of about 4 JK-2mol-1Ce due to strong electron and short-range magnetic correlations. These compounds show a crossover from a magnetically correlated heavy-fermion state to a single impurity state in applied magnetic fields. In order to study the proximity of Ce3Co4Sn13 to the possible magnetic quantum critical point (QCP), we investigated the system of Ce3-xLaxCo4Sn13 alloys. We found the critical concentration ?, which separates the magnetically correlated state (?) from a single impurity state (?), however the low-T C(T)/T and the magnetic susceptibility behaviours are not characteristic of the QCP. With increasing of the magnetic field, resistivity follows power law behaviour for the samples ?, with n strongly field dependent. The ?-anomaly is discussed on the base of spin-fluctuation theory of Moriya and Takimoto. Specific heat data show that La3M4Sn13 are typical BCS superconductors, however, La3Rh4Sn13 and La3Ru4Sn13 exhibit a second superconducting phase, characteristic of inhomogeneous superconductors.

  7. Quality considerations in dental education in India.

    PubMed

    Virdi, Mandeep S

    2012-03-01

    Undergraduate dental education programs have grown tremendously in India over the last five to six decades, mainly in the private sector, putting significant pressure on resources including faculty. This has raised concerns about the quality of dental education in the country. This article examines the concept of quality as applicable to higher education. It provides a roadmap for application of quality concepts, including steps for improving the effectiveness of teaching and applying Total Quality Management to dental education. It also makes suggestions for college-level and structural-level changes to meet the requirement of improved quality, which includes the addition of dental education as a subject in postgraduate dental programs.

  8. Dental stem cells and their sources.

    PubMed

    Sedgley, Christine M; Botero, Tatiana M

    2012-07-01

    The search for more accessible mesenchymal stem cells than those found in bone marrow has propelled interest in dental tissues. Human dental stem/progenitor cells (collectively termed dental stem cells [DSCs]) that have been isolated and characterized include dental pulp stem cells, stem cells from exfoliated deciduous teeth, stem cells from apical papilla, periodontal ligament stem cells, and dental follicle progenitor cells. Common characteristics of these cell populations are the capacity for self-renewal and the ability to differentiate into multiple lineages. In vitro and animal studies have shown that DSCs can differentiate into osseous, odontogenic, adipose, endothelial, and neural-like tissues.

  9. Prevention of dental disease versus surgical treatment.

    PubMed

    Larson, Thomas D

    2014-01-01

    The members of the Minnesota legislature have debated methods by which access to dental care and treatment of dental disease can be improved at a cost lower than that of present delivery systems. This review sheds light on some significant aspects of what the dental profession has learned over the last century that has proven significantly beneficial to the overall health of the American populace. Recommendations are made in the use of cost-effective dental public health interventions that could be used to provide better access and improved dental health at lower cost.

  10. Health maintenance facility: Dental equipment requirements

    NASA Technical Reports Server (NTRS)

    Young, John; Gosbee, John; Billica, Roger

    1991-01-01

    The objectives were to test the effectiveness of the Health Maintenance Facility (HMF) dental suction/particle containment system, which controls fluids and debris generated during simulated dental treatment, in microgravity; to test the effectiveness of fiber optic intraoral lighting systems in microgravity, while simulating dental treatment; and to evaluate the operation and function of off-the-shelf dental handheld instruments, namely a portable dental hand drill and temporary filling material, in microgravity. A description of test procedures, including test set-up, flight equipment, and the data acquisition system, is given.

  11. FOXO3-mTOR Metabolic Cooperation in the Regulation of Erythroid Cell Maturation and Homeostasis

    PubMed Central

    Zhang, Xin; Campreciós, Genís; Rimmelé, Pauline; Liang, Raymond; Yalcin, Safak; Mungamuri, Sathish Kumar; Barminko, Jeffrey; D’Escamard, Valentina; Baron, Margaret H.; Brugnara, Carlo; Papatsenko, Dmitri; Rivella, Stefano; Ghaffari, Saghi

    2014-01-01

    Ineffective erythropoiesis is observed in many erythroid disorders including β-thalassemia and anemia of chronic disease in which increased production of erythroblasts that fail to mature exacerbate the underlying anemias. As loss of the transcription factor FOXO3 results in erythroblast abnormalities similar to the ones observed in ineffective erythropoiesis, we investigated the underlying mechanisms of the defective Foxo3−/− erythroblast cell cycle and maturation. Here we show that loss of Foxo3 results in overactivation of the JAK2/AKT/mTOR signaling pathway in primary bone marrow erythroblasts partly mediated by redox modulation. We further show that hyperactivation of mTOR signaling interferes with cell cycle progression in Foxo3 mutant erythroblasts. Importantly, inhibition of mTOR signaling, in vivo or in vitro enhances significantly Foxo3 mutant erythroid cell maturation. Similarly, in vivo inhibition of mTOR remarkably improves erythroid cell maturation and anemia in a model of β-thalassemia. Finally we show that FOXO3 and mTOR are likely part of a larger metabolic network in erythroblasts as together they control the expression of an array of metabolic genes some of which are implicated in erythroid disorders. These combined findings indicate that a metabolism-mediated regulatory network centered by FOXO3 and mTOR control the balanced production and maturation of erythroid cells. They also highlight physiological interactions between these proteins in regulating erythroblast energy. Our results indicate that alteration in the function of this network might be implicated in the pathogenesis of ineffective erythropoiesis. PMID:24966026

  12. Cost-Efficiency of Indigenously Fabricated Mobile-Portable Dental Unit in Delivery of Primary Healthcare in Rural India

    PubMed Central

    Goel, Ashok; Torwane, Nilesh Arjun

    2014-01-01

    Aim: Innovation in primary oral healthcare delivery is a potential yet relatively unexplored area in Dental literature. Aim of the present study was to assess the economic gains that can be made by designing and operating an indigenously fabricated portable dental unit in rural areas. Materials and Methods: Cost-efficiency was determined by comparing total revenue (number of patients treated) with total costs (direct – capital cost of fabrication; and indirect – dental materials, disposables, transport, miscellaneous) over a period of seven years (2005 to 2012). Operational efficiency of portable dental units was also compared with dental vans on various categories of performance indicators. Data analysis was based on institutional records of Rajasthan Dental College (RDC), Jaipur, India. Results: Results show that a total of 52,900 patients who attended 223 camps during this period were provided various primary oral healthcare services using four such portable dental units that were developed @ Rs. 24,000 ($ 417) per unit. Based on a cost-efficiency of Rs 35.53 ($ 0.65) per person, which is among the lowest reported from any part of the world, the authors conclude that indigenously fabricated portable dental units provide a cost-efficient service. The other aspects most relevant to portable equipment were ease of transportation and feasibility in domiciliary care provision. Conclusion: The Limitations of productivity due to time spent in setting up the unit and need for additional space/equipment was their main drawbacks vis-à-vis dental vans. PMID:25177627

  13. Development of hydrophilic dental wax without surfactant using a non-thermal air atmospheric pressure plasma jet

    NASA Astrophysics Data System (ADS)

    Lee, Jung-Hwan; Kim, Yong-Hee; Choi, Eun-Ha; Kim, Kwang-Mahn; Kim, Kyoung-Nam

    2014-06-01

    Dental wax (DW), a low-melting and high-molecular-weight organic mixture, is widely used in dentistry for forming moulds of teeth. Hydrophilicity is an important property for DW, as a wet dental investment is used to surround the wax before wax burnout is performed. However, recent attempts to improve the hydrophilicity of DW using a surfactant have resulted in the reduced mechanical properties of the dental investment, leading to the failure of the dental restoration. This study applied a non-thermal air atmospheric pressure plasma jet (AAPPJ) for DW surface treatment and investigated its effect on both DW hydrophilicity and the dental investment's mechanical properties. The results showed that the application of the AAPPJ significantly improved the hydrophilicity of the DW, and that the results were similar to that of cleaner-treated DW using commercially available products with surfactant. A surface chemical analysis indicated that the improvement of hydrophilicity was related to an increase in the number of oxygen-related bonds on the DW surface following the removal of carbon hydrate in both AAPPJ and cleaner-treated DW. However, cleaner treatment compromised the mechanical property of the dental investment when the dental investment was in contact with the treated DW, while the AAPPJ treatment did not. Therefore, the use of AAPPJ to treat DW is a promising method for accurate dental restoration, as it induces an improvement in hydrophilicity without harming the dental investment.

  14. Ketoprofen Dental Pain Study.

    PubMed

    Levin, L M; Cooper, S A; Betts, N J; Wedell, D; Hermann, D G; Lamp, C; Secreto, S A; Hersh, E V

    1997-01-01

    Ketoprofen is a nonsteroidal antiinflammatory drug, recently approved as an over-the-counter (OTC) analgesic at a 12.5 mg dosage strength. This is the first published study which explores the analgesic efficacy and safety of ketoprofen 12.5 mg in patients experiencing pain following the removal of impacted third molars. This study was single-dose, double-blind and randomized utilizing a 6-hour in-patient evaluation period. Patients ingested a single dose of ketoprofen 12.5 mg (n = 30), ketoprofen 37.5 mg (n = 32) or placebo (n = 15) when their post-surgical pain reached at least a moderate intensity on a 5-point categorical (CAT) scale and greater than 50 mm on a 100 mm visual analog scale (VAS). Measures of pain intensity and relief were gathered every 20 minutes for the first 2 hours, and then hourly from hours 3 through 6. Adverse drug reactions were also recorded as they occurred. Both dosages of ketoprofen were significantly more efficacious than placebo (two way ANOVAs, p < 0.05). For pain intensity difference (PID) and pain relief, the 12.5 mg dose exhibited statistical superiority from hours 1 through 3, while the 37.5 mg dose exhibited statistical superiority from 40 minutes through 4 hours. Ketoprofen 37.5 mg was significantly more efficacious than the 12.5 mg dose only at 40 minutes for PID(VAS) and relief, and at 60 minutes for PID(VAS). Both ketoprofen dosages displayed significantly greater 3-hr, 4-hr and 6-hr summary analgesic measures (SPID(VAS), SPID(CAT), TOTPAR) than placebo, with the exception of the 6-hr SPID(CAT) measure for ketoprofen 12.5 mg. No serious side effects were observed in this study. We conclude that ketoprofen in a dose range of 12.5 mg to 37.5 mg is a safe and effective analgesic for the relief of post-operative dental pain.

  15. Synthesis of new visible light active photocatalysts of Ba(In(1/3)Pb(1/3)M'(1/3))O3 (M' = Nb, Ta): a band gap engineering strategy based on electronegativity of a metal component.

    PubMed

    Hur, Su Gil; Kim, Tae Woo; Hwang, Seong-Ju; Park, Hyunwoong; Choi, Wonyong; Kim, Sung Jin; Kim, Sun Jin; Choy, Jin-Ho

    2005-08-11

    We have synthesized new, efficient, visible light active photocatalysts through the incorporation of highly electronegative non-transition metal Pb or Sn ions into the perovskite lattice of Ba(In(1/3)Pb(1/3)M'(1/3))O3 (M = Sn, Pb; M' = Nb, Ta). X-ray diffraction, X-ray absorption spectroscopic, and energy dispersive spectroscopic microprobe analyses reveal that tetravalent Pb or Sn ions exist in the B-site of the perovskite lattice, along with In and Nb/Ta ions. According to diffuse UV-vis spectroscopic analysis, the Pb-containing quaternary metal oxides Ba(In(1/3)Pb(1/3)M'(1/3))O3 possess a much narrower band gap (E(g) approximately 1.48-1.50 eV) when compared to the ternary oxides Ba(In(1/2)M'(1/2))O3 (E(g) approximately 2.97-3.30 eV) and the Sn-containing Ba(In(1/3)Sn(1/3)M'(1/3))O3 derivatives (E(g) approximately 2.85-3.00 eV). Such a variation of band gap energy upon the substitution is attributable to the broadening of the conduction band caused by the dissimilar electronegativities of the B-site cations. In contrast to the ternary or the Sn-substituted quaternary compounds showing photocatalytic activity under UV-vis irradiation, the Ba(In(1/3)Pb(1/3)M'(1/3))O3 compounds induce an efficient photodegradation of 4-chlorophenol under visible light irradiation (lambda > 420 nm). The present results highlight that the substitution of electronegative non-transition metal cations can provide a very powerful way of developing efficient visible light harvesting photocatalysts through tuning of the band structure of a semiconductive metal oxide.

  16. Radiographic signs and diagnosis of dental disease.

    PubMed

    Bellows, J

    1993-08-01

    Dental radiographs are critical for the complete assessment and treatment of dental diseases. Dental radiography is commonly used to evaluate congenital dental defects, periodontal disease, orthodontic manipulations, oral tumors, endodontic treatments, oral trauma, and any situation where an abnormality is suspected. Although standard radiographic equipment and film can be used to produce dental radiographs, dental X-ray equipment and film provide superior quality images and greater convenience of animal patient positioning. An understanding of normal dental radiographic anatomy is important when interpreting dental radiographs. Stage III periodontitis is the earliest stage of periodontal disease at which radiographic abnormalities become apparent. Bone loss associated with periodontal disease can be classified as either horizontal or vertical. Periapical radiolucencies can represent granulomas, cysts, or abscesses, whereas periapical radiodensities may represent sclerotic bone or condensing osteitis. Lytic lesions of the bone of the jaw often represent oral neoplasms. Neoplasms also can displace or disrupt teeth in the dental arch. Resorptive lesions can be external or internal and appear as radiolucent areas involving the external surface of the root or the pulp cavity, respectively. Feline dental resorptive lesions, also known as odontoclastic resorptions, are a specific form of dental resorptive lesions unique to cats.

  17. Is there an association between the presence of dental fluorosis and dental trauma amongst school children?

    PubMed

    Oliveira, Lorenna Fonseca Braga de; Souza, João Gabriel Silva; Mendes, Rafael Inácio Pompeu; Oliveira, Rodrigo Caldeira Nunes; Oliveira, Carolina de Castro; Lima, Carolina Veloso; Martins, Andréa Maria Eleutério de Barros Lima

    2016-03-01

    Our objective was to evaluate whether there is an association with the different levels of dental fluorosis and the presence of dental trauma amongst school children. A transversal study was conducted amongst school children from the age of 12. Dental examinations were conducted by 24 well trained and fully qualified dental surgeons. Data was collected from 36 randomly selected public schools amongst 89 schools in a municipality. The criteria used to diagnose dental fluorosis was based on the Dean's fluorosis Index and for diagnosing dental trauma we looked for clinical signs of crown fractures and dental avulsions. Multiple descriptive analysis, which was bivariate, was carried out. Amongst the 2,755 school children that took part in the study 1,089 (39.6%) were diagnosed with dental fluorosis and 106 (3.8%) had one tooth or more with dental trauma. We noted a high prevalence of dental fluorosis, independent of the level of severity, amongst individuals with one tooth or more who had dental trauma. This association was even more evident where there were severely high levels of fluorosis. We also noted that the presence of fluorosis was greater amongst those that actively paid more attention to discoloration on their teeth and who received treatment from a dental professional at their schools. Nevertheless dental fluorosis was associated with the presence of dental trauma, independent of its severity.

  18. Disparities in unmet dental need and dental care received by pregnant women in Maryland.

    PubMed

    Singhal, Astha; Chattopadhyay, Amit; Garcia, A Isabel; Adams, Amy B; Cheng, Diana

    2014-09-01

    To examine prenatal dental care needs, utilization and oral health counseling among Maryland women who delivered a live infant during 2001-2003 and identify the factors associated with having a dental visit and having an unmet dental need during pregnancy. Pregnancy Risk Assessment Monitoring System is an ongoing population based surveillance system that collects information of women's attitudes and experiences before, during, and shortly after pregnancy. Logistic regression was used to model dental visits and unmet dental need using predictor variables for Maryland 2001-2003 births. Less than half of all women reported having a dental visit and receiving oral health advice during pregnancy. Twenty-five percent of women reported a need for dental care, of which 33 % did not receive dental care despite their perceived need. Multivariate modeling revealed that racial minorities, women who were not married and those with annual income <$40,000 were least likely to have a dental visit. Women who were not married, had low annual income, were older than 40 years of age, had an unintended pregnancy and received prenatal care later than desired were most likely to have an unmet dental need during pregnancy. Despite reported needs and existing recommendations to include oral health as a component of prenatal care, less than half of pregnant women have a dental visit during their pregnancy. One-third of women with a dental problem did not have a dental visit highlighting the unmet need for dental care during pregnancy.

  19. Usefulness of Forensic Dental Symbols© and Dental Encoder© database in forensic odontology.

    PubMed

    Martínez-Chicón, Jesús; Valenzuela, Aurora

    2012-01-01

    A new universal graphic dental system, Forensic Dental Symbols(©), has been created to provide precision in the construction of dental records, improve standardization, and increase efficiency in dental identification procedures. Two hundred and thirty-four different graphic symbols representing the most frequent clinical status for each tooth were designed. Symbols can be then converted to a typographic font and then are ready to use in any computer. For the appropriate use, manipulation, and storage of dental information generated by the Forensic Dental Symbols(©), Dental Encoder(©) database has been created. The database contains all the information required by INTERPOL Disaster Victim Identification (DVI)-dental-forms. To explore the possibilities that Dental Encoder(©) offers, an antemortem dental database from a Spanish population of 3920 military personnel had been constructed. Data generated by Dental Encoder(©) were classified into sex and age groups. The program can perform an automatic search of the database for cases that match a selected clinical status presented in a single tooth or a combination of situations for several teeth. Moreover, Dental Encoder(©) allows information to be printed on INTERPOL DVI-dental-forms, or the inclusion of any completed form into any document, technical report, or identification of dental report.

  20. Dental extraction during dicumarol therapy.

    PubMed

    ASKEY, J M; CHERRY, C B

    1956-01-01

    Extraction of 14 teeth in six patients taking dicumarol caused no unusual bleeding. Discontinuance of dicumarol prior to dental extraction should not necessarily be a routine procedure; in certain persons with a demonstrated strong tendency to recurrent thrombosis, dicumarol should be continued, based on the decision that the danger of clotting without the drug is greater than the danger of bleeding with the drug.

  1. Genetic aspects of dental disorders.

    PubMed

    Townsend, G C; Aldred, M J; Bartold, P M

    1998-08-01

    This paper reviews past and present applications of quantitative and molecular genetics to dental disorders. Examples are given relating to craniofacial development (including malocclusion), oral supporting tissues (including periodontal diseases) and dental hard tissues (including defects of enamel and dentine as well as dental caries). Future developments and applications to clinical dentistry are discussed. Early investigations confirmed genetic bases to dental caries, periodontal diseases and malocclusion, but research findings have had little impact on clinical practice. The complex multifactorial aetiologies of these conditions, together with methodological problems, have limited progress until recently. Present studies are clarifying previously unrecognized genetic and phenotypic heterogeneities and attempting to unravel the complex interactions between genes and environment by applying new statistical modelling approaches to twin and family data. Linkage studies using highly polymorphic DNA markers are providing a means of locating candidate genes, including quantitative trait loci (QTL). In future, as knowledge increases; it should be possible to implement preventive strategies for those genetically-predisposed individuals who are identified to be at risk.

  2. Head Start Dental Health Curriculum.

    ERIC Educational Resources Information Center

    Administration for Children, Youth, and Families (DHHS), Washington, DC. Head Start Bureau.

    This curriculum for Head Start programs provides preschool learning experiences that teach about dental health. The majority of the curriculum guide is devoted to the following lesson plans: (1) "Introduction of 'Smiley the Super Pup'," an optional puppet character which may be used to review the concepts covered in each lesson; (2)…

  3. Preparing to Enter Dental School.

    ERIC Educational Resources Information Center

    Peterson, Shailer

    A guide for students who are seeking admission to dental school is presented. The comprehensive coverage includes basic facts about dentistry as well as specific requirements about the following areas: facts about health care providers, treating patients in dentistry, and nonpatient-oriented dentistry; historical landmarks in dentistry; the…

  4. 76 FR 14600 - Dental Conditions

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-17

    ... least 180 days (or 90 days if a veteran of the Gulf War era), and The veteran's DD214 does not bear.... 2062 (Class II(b)). Who are former prisoners of war, as determined by the concerned military service... there is dental disability due to combat wounds or service trauma. To determine prisoner of war...

  5. Dental Hygienists Licensed in Washington.

    ERIC Educational Resources Information Center

    Washington State Dept. of Social and Health Services, Olympia. Health Manpower Project.

    Beginning with a statement on the profession of dental hygiene and the two types of professional preparation available in the field, the pilot study then presents a two-part summary of its findings and an explanation of the methodology employed. Part I of the main portion of the report concerns employment characteristics (status, age, residence,…

  6. Dentistry and Dental Hygiene Handbook.

    ERIC Educational Resources Information Center

    New York State Education Dept., Albany. Office of the Professions.

    This handbook, developed as a reference guide, contains the texts of laws, rules, and regulations of the New York State Education Department governing dentistry and dental hygiene practice in the state. It also describes licensure requirements and includes complete application forms and instructions for obtaining a license and first registration…

  7. Management Practices in Dental Schools.

    ERIC Educational Resources Information Center

    Journal of Dental Education, 2000

    2000-01-01

    Five articles on management practices in dental schools include: "Overview" (Robert W. Comer et al.); "Patient Support Services" (Betsy A. Hagan et al.); "Health and Financial Records" (Robert W. Comer et al.); "Support Services and Staff Responsibilities" (Wayne William Herman et al.) and "Implications and Future Challenges" (Robert W. Comer et…

  8. Dental Office Procedures. Student's Manual.

    ERIC Educational Resources Information Center

    Apfel, Maura; Weaver, Trudy Karlene

    This manual is part of a series dealing with skills and information needed by students in dental assisting. The individualized student materials are suitable for classroom, laboratory, or cooperative training programs. This student manual contains three units covering the following topics: ethics and jurisprudence; the appointment book; and…

  9. Health Instruction Packages: Dental Personnel.

    ERIC Educational Resources Information Center

    Hayes, Gary E.; And Others

    Text, illustrations, and exercises are utilized in this set of four learning modules designed to instruct non-professional dental personnel in selected job-related skills. The first module, by Gary E. Hayes, describes how to locate the hinge axis point of the jaw, place and secure a bitefork, and perform a facebow transfer. The second module,…

  10. Security in dental office computing.

    PubMed

    Alsobrook, Stephen C

    2002-01-01

    Dental office computers are increasingly used to store critical financial and clinical data. That data is subject to loss or alteration from a number of possible sources. Secure communications, security of the computer system from outside attacks, and data backup are discussed.

  11. Dental Assistant. Health Occupations Education.

    ERIC Educational Resources Information Center

    Hefner, Dollie

    This curriculum is comprised of 31 instructional units divided into eight subject areas: orientation (6 units), anatomy and physiology (6 units), dental histology (1 unit), microbiology and bacteriology (2 units), pharmacology (2 units), chairside assistance (9 units), roentgenology (2 units), and practice administration (3 units). Each…

  12. Dental plaque identification at home

    MedlinePlus

    ... about 30 seconds. Then rinse your mouth with water and examine your teeth. Any red-stained areas are plaque. A small dental mirror may help you check all areas. The second method uses a plaque light. ... your mouth gently with water. Examine your teeth and gums while shining an ...

  13. Prevention and dental health services.

    PubMed

    Widström, Eeva

    2004-01-01

    There has been, and still is a firm belief that regular use of dental services is beneficial for all. Thus governments in most European countries have shown some interest in training oral health care professionals, distributing the dental workforce and cost sharing. Constantly evolving treatment options and the introduction of new methods make dental clinicians feel uncertain as to which treatments are most useful, who would benefit from them, and which treatments will achieve cost-effective health gain. Although there is a considerable quantity of scientific literature showing that most available preventive measures are effective, and the number of sensible best-practice guidelines in prevention is growing, there are few studies on cost-efficiency of different methods and, secondly, the prevention and treatment guidelines are poorly known among general practitioners. In the eyes of the public, it is obvious that preventive methods practised by patients at home have been eclipsed by clinical procedures performed in dental clinics. Reliance on an increasingly individualistic approach to health care leads to the medicalisation of issues that are not originally health or medical problems. It is important to move general oral disease prevention back to the people who must integrate this in their daily routines. Prevention primarily based on healthy lifestyles, highlighted in the new public health strategy of the European Union (EU), is the key to future health policy.

  14. Dental Health for the Handicapped.

    ERIC Educational Resources Information Center

    Alabama Univ., Birmingham. Dental Advisory Committee.

    Guidelines to aid attendants to maintain good dental health among institutionalized mentally retarded persons are presented. Aspects considered include reasons for taking care of the mouth and means of adapting the oral hygiene program to each individual. Also described are oral hygiene programs now existing in group living settings and methods of…

  15. Spacewatch Astrometry of Asteroids and Comets with the Bok 2.3-m and Mayall 4-m Telescopes.

    NASA Astrophysics Data System (ADS)

    Scotti, James V.; McMillan, Robert S.; Larsen, Jeffrey A.

    2014-11-01

    We use the Bok 2.3-m and Mayall 4-m telescopes on Kitt Peak to improve knowledge of the orbits and magnitudes of high priority classes of Near Earth Objects (NEOs) and other small bodies in need of recovery that cannot be reached with the Spacewatch 0.9-m and 1.8-m telescopes. Targets include NEOs with potential close encounters with Earth (Virtual Impactors; VIs), future targets of radar, NEOs previously detected by NEOWISE with orbits or albedos suggesting potential for cometary activity, potential destinations for spacecraft, returning NEOs with hard-won albedos and diameters determined by NEOWISE, and faint Potentially Hazardous Asteroids (PHAs). Notable targets successfully recovered include the Earth Trojan 2010 TK7 and the faint almost-lost VI 2011 BY24 discovered by NEOWISE. Between 2010 June 6 and 2014 July 23 the MPC accepted 1316 lines of astrometry by us with these telescopes on 207 different NEOs including 84 PHAs. We made 343 observations of PHAs with V>=22. Our average arc extension on large PHAs (with H<=17.75) is 184 days, which is 2x longer than the next most effective observing station. Recently with all four telescopes Spacewatch has made 39% of all the observations of PHAs that were fainter than V=22 at the time of measurement. This count is twice that of the next most productive station in that measure. The faintest V magnitude we have observed so far is 24.4 and the smallest solar elongation angle at which we have observed is 46 degrees. Our work with the Mayall and Bok telescopes has been determined by the Minor Planet Center (MPC) to provide "dramatic improvement" to NEO orbits (T. Spahr, 2014 private communication). Support of Spacewatch was/is from JPL subcontract 100319 (2010-2011), NASA/NEOO grants NNG06GJ42G, NNX11AB52G, NNX12AG11G, NNX13AP99G, NNX14AL13G, and NNX14AL14G, the Lunar and Planetary Laboratory, the Brinson Foundation of Chicago, IL, the estates of R. S. Vail and R. L. Waland, and other private donors. We are also indebted

  16. A useful and non-invasive microanalysis method for dental restoration materials

    NASA Astrophysics Data System (ADS)

    Hosoki, M.; Satsuma, T.; Nishigawa, K.; Takeuchi, H.; Asaoka, K.

    2012-12-01

    The elemental analysis of intraoral dental restorations provides considerable information for the treatment of dental metal allergy. Elemental analyses require specific instruments and complicated procedures, so this examination is not commonly carried out in private dental clinics. We describe a novel, simple and useful micro-analytical method for dental metal restorations. Micro metal dust was obtained by polishing the surface of restorative metal material with an unused silicone point (SUPER-SNAP). The metal dust on the silicone point was then rubbed onto adhesive tape, and this tape was covered with polyethylene film. The amount of metal dust material was <20 μg. An energy dispersive X-ray fluorescence spectrometer was used to carry out the elementary analysis of the metal dust on the polyethylene film. Three types of dental metal alloy materials of known components were examined. The results of elementary analyses were compared with the specifications provided by the manufacturer. The same procedure was carried out for three dental metal restorations of an adult female volunteer in vivo. The results of elemental analyses for five alloy materials exactly matched the product specification. Three metal samples obtained from intraoral restoration were also available for elemental analyses. The distinct advantage of this method is that it enables sample extraction without an invasive effect for the restoration. The metal sample is in a polyethylene film, so it is easy to mail it for inspection at specialist institutes yet it can be also be used in general dental clinics.

  17. American Dental Association

    MedlinePlus

    ... Access member benefits and ADA policy ADA Store Purchase ADA products ADA Annual Meeting Attend ADA's premier ... font size Toggle Search Area Join us on Facebook Follow us on Twitter Follow us on YouTube ...

  18. Isolation of Actinomyces bacteriophage from human dental plaque.

    PubMed

    Tylenda, C A; Calvert, C; Kolenbrander, P E; Tylenda, A

    1985-07-01

    Human dental plaque samples were screened for the presence of bacteriophage for Actinomyces viscosus and Streptococcus sanguis. None of the 336 samples yielded phage for S. sanguis, but 10 contained virulent actinomyces phage. A high host cell specificity was observed in that one phage isolate infected only A. viscosus T14V, eight phage isolates infected only A. viscosus MG-1, and one infected both strains. None was capable of productively infecting various other actinomyces strains that represented the six actinomyces coaggregation groups. Because phage-containing samples occurred randomly in this survey, no correlation between the individual collecting the samples, dental clinic, or type of patient and the presence of phage in the sample was noted. Examination of one of the samples that yielded phage for the presence of a natural host strain for that particular phage resulted in the isolation of two strains which were identified as A. viscosus serotype II and Actinomyces naeslundii serotype I. This is the first report of an A. naeslundii host strain and actinomyces bacteriophage of human dental plaque origin. The finding of both phage and host strains in the same dental plaque sample along with the observation of high host cell specificity by these phage provide indicators that support an active role for actinomyces bacteriophage in oral microbial ecology. The use of these freshly isolated phage as probes to study actinomyces coaggregation properties is discussed.

  19. Spectral and statistical analysis of fluctuations in the SOL and diverted plasmas of the Uragan-3M torsatron

    NASA Astrophysics Data System (ADS)

    Beletskii, A. A.; Grigor'eva, L. I.; Sorokovoy, E. L.; Chechkin, V. V.; Sorokovoy, Y. L.; Volkov, Ye. D.; Burchenko, P. Ya.; Kulaga, A. Ye.; Tsybenko, S. A.; Lozin, A. V.; Slavnyj, A. S.; Lavrenovich, Yu. S.; Zamanov, N. V.; Mironov, Yu. K.; Romanov, V. S.

    2009-10-01

    In the l = 3/ m = 9 Uragan-3M (U3-M) torsatron ( R 0 = 1 m, ā ≈ 0.12 m, ι( ā)/2π ˜ 0.3) with an open helical divertor and a plasma produced and heated by RF fields (ω ≲ ωci), studies of low frequency (5-100 kHz) density and potential fluctuations in the SOL plasma and in the diverted plasma flows (DPFs), have been carried out. It is shown, that in the SOL to more (less) distantly located points relative to the last closed magnetic surface, higher (lower) frequency fluctuations are inherent. Such a spectral splitting in two sub-ranges occurs in the DPFs too. A peculiarity of the spatial distribution of DPF fluctuation spectra is that lower frequency fluctuations dominate on the ion toroidal B × ∇ B drift side. During L-H-like transition in U-3M simultaneously with strong E r shear formation, a suppression of lower frequency fluctuations and a decrease of local radial turbulent particle flux take place. Results are presented of investigation of plasma density fluctuations in SOL with the use of probability distribution function (PDF) analysis. Evaluations of skewness and kurtosis of fluctuations have been made. The analysis of I s fluctuations in DPF have been carried out in a similar way.

  20. Effect of 3M Coban Self-Adherent Wraps on edema and function of the burned hand: a case study.

    PubMed

    Lowell, M; Pirc, P; Ward, R S; Lundy, C; Wilhelm, D A; Reddy, R; Held, B; Bernard, J

    2003-01-01

    Edema and limited function are common acute problems associated with hand burns. This case study examined the effects of 3M Coban Self-Adherent Wraps on edema and function in a 59-year-old male (46% TBSA flame injury) with newly skin grafted dorsally burned hands. At the time of each dressing change, circumferential measurements were taken of both hands and weekly active range of motion and grip strength measurements were recorded. The nine-hole peg test was used to appraise dexterity. During the 4-week study period, there was less edema, greater active range of motion and grip strength, and greater dexterity in the hand with 3M Coban Self-Adherent Wraps as compared with the control hand. This case study suggests that 3M Coban Self-Adherent Wraps were effective in reducing edema in the skin-grafted hand after skin grafting. It further appeared that the reduced edema may have contributed to improved hand function and that 3M Coban Self-Adherent Wraps as a compressive dressing do not impede hand function

  1. Medicaid Adult Dental Benefits Increase Use Of Dental Care, But Impact Of Expansion On Dental Services Use Was Mixed.

    PubMed

    Singhal, Astha; Damiano, Peter; Sabik, Lindsay

    2017-04-01

    Dental coverage for adult enrollees is an optional benefit under Medicaid. Thirty-one states and the District of Columbia have expanded eligibility for Medicaid under the Affordable Care Act. Millions of low-income adults have gained health care coverage and, in states offering dental benefits, oral health coverage as well. Using data for 2010 and 2014 from the Behavioral Risk Factor Surveillance System, we examined the impact of Medicaid adult dental coverage and eligibility expansions on low-income adults' use of dental care. We found that low-income adults in states that provided dental benefits beyond emergency-only coverage were more likely to have had a dental visit in the past year, compared to low-income adults in states without such benefits. Among states that provided dental benefits and expanded their Medicaid program, regression-based estimates suggest that childless adults had a significant increase (1.8 percentage points) in the likelihood of having had a dental visit, while parents had a significant decline (8.1 percentage points). One possible explanation for the disparity is that after expansion, newly enrolled childless adults might have exhausted the limited dental provider capacity that was available to parents before expansion. Additional policy-level efforts may be needed to expand the dental care delivery system's capacity.

  2. Abscinazole-E3M, a practical inhibitor of abscisic acid 8′-hydroxylase for improving drought tolerance

    PubMed Central

    Takeuchi, Jun; Okamoto, Masanori; Mega, Ryosuke; Kanno, Yuri; Ohnishi, Toshiyuki; Seo, Mitsunori; Todoroki, Yasushi

    2016-01-01

    Abscisic acid (ABA) is an essential phytohormone that regulates plant water use and drought tolerance. However, agricultural applications of ABA have been limited because of its rapid inactivation in plants, which involves hydroxylation of ABA by ABA 8′-hydroxylase (CYP707A). We previously developed a selective inhibitor of CYP707A, (−)-Abz-E2B, by structurally modifying S-uniconazole, which functions as an inhibitor of CYP707A and as a gibberellin biosynthetic enzyme. However, its synthetic yield is too low for practical applications. Therefore, we designed novel CYP707A inhibitors, Abz-T compounds, that have simpler structures in which the 1,2,3-triazolyl ring of (−)-Abz-E2B has been replaced with a triple bond. They were successfully synthesised in shorter steps, resulting in greater yields than that of (−)-Abz-E2B. In the enzymatic assays, one of the Abz-T compounds, (−)-Abz-E3M, acted as a strong and selective inhibitor of CYP707A, similar to (−)-Abz-E2B. Analysis of the biological effects in Arabidopsis revealed that (−)-Abz-E3M enhanced ABA’s effects more than (−)-Abz-E2B in seed germination and in the expression of ABA-responsive genes. Treatment with (−)-Abz-E3M induced stomatal closure and improved drought tolerance in Arabidopsis. Furthermore, (−)-Abz-E3M also increased the ABA response in rice and maize. Thus, (−)-Abz-E3M is a more practical and effective inhibitor of CYP707A than (−)-Abz-E2B. PMID:27841331

  3. Dental students' familiarity with the medical management of dental patients at Brazilian dental schools.

    PubMed

    Araújo, Paula Caetano; Garbín, Cléa Adas Saliba; Moimaz, Suzely Adas Saliba; Saliba, Nemre Adas; Arcieri, Renato Moreira

    2013-05-01

    Drug therapy in dentistry is essential for patients' treatment and requires special care by dentists, so it must be part of a well-grounded education for predoctoral dental students. The aim of this study was to evaluate the knowledge of undergraduate students at dental schools in Brazil about the use of drugs in dental practice. The sample universe was comprised of all undergraduates enrolled in the last year of the dentistry course in three universities in 2010 (n=253). Inclusion criteria were students in their last year of enrollment and who agreed to participate in the research. The results were analyzed on Epi Info 3.5.1 software. Analyses were conducted with chi-square, Friedman, and Wilcoxon tests. Slightly more than half of the participants (51.9 percent) reported the ideal dose of anesthetic for a normal patient. However, their difficulties increased when asked about the relationship between the anesthetic and patients with systemic disease or those needing special care. Regarding drugs that usually cause allergic attack, only 29.2 percent and 36.6 percent, respectively, cited methyl methacrylate and latex. This study found that the knowledge of these undergraduates about the questions was deficient, so dental education should include more theoretical and clinical practice in recognizing the patient's medical needs.

  4. Sexual Advances by Patients in Dental Practice: Implications for the Dental and Dental Hygiene Curricula.

    ERIC Educational Resources Information Center

    Chiodo, Gary T.; And Others

    1992-01-01

    A survey of Oregon dentists (n=248) and dental hygienists (n=235) investigated frequency of patient-initiated sexual advances and methods of dealing with them. Up to 44 percent experienced 1 or more patient verbal advances, and 23 percent experienced physical advances during a 5-year period. Inclusion of related issues in professional curricula is…

  5. 21 CFR 872.4130 - Intraoral dental drill.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Intraoral dental drill. 872.4130 Section 872.4130...) MEDICAL DEVICES DENTAL DEVICES Surgical Devices § 872.4130 Intraoral dental drill. (a) Identification. An intraoral dental drill is a rotary device intended to be attached to a dental handpiece to drill holes...

  6. 21 CFR 872.4130 - Intraoral dental drill.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Intraoral dental drill. 872.4130 Section 872.4130...) MEDICAL DEVICES DENTAL DEVICES Surgical Devices § 872.4130 Intraoral dental drill. (a) Identification. An intraoral dental drill is a rotary device intended to be attached to a dental handpiece to drill holes...

  7. 21 CFR 872.4130 - Intraoral dental drill.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Intraoral dental drill. 872.4130 Section 872.4130...) MEDICAL DEVICES DENTAL DEVICES Surgical Devices § 872.4130 Intraoral dental drill. (a) Identification. An intraoral dental drill is a rotary device intended to be attached to a dental handpiece to drill holes...

  8. 21 CFR 872.4130 - Intraoral dental drill.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Intraoral dental drill. 872.4130 Section 872.4130...) MEDICAL DEVICES DENTAL DEVICES Surgical Devices § 872.4130 Intraoral dental drill. (a) Identification. An intraoral dental drill is a rotary device intended to be attached to a dental handpiece to drill holes...

  9. 21 CFR 872.4130 - Intraoral dental drill.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Intraoral dental drill. 872.4130 Section 872.4130...) MEDICAL DEVICES DENTAL DEVICES Surgical Devices § 872.4130 Intraoral dental drill. (a) Identification. An intraoral dental drill is a rotary device intended to be attached to a dental handpiece to drill holes...

  10. An Overview of Dental Radiology. NCHCT Monograph Series.

    ERIC Educational Resources Information Center

    Manny, Edward F.; And Others

    This overview of dental radiology contains sections on demographics, equipment, dental radiology quality assurance, efficacy, dental radiology education curricula, professional organizations' guidelines for training and use, and state activities. In section 1 dental personnel, population of dental personnel, employment and earning prospects,…

  11. Creating a Successful School-Based Mobile Dental Program

    ERIC Educational Resources Information Center

    Jackson, David M.; Jahnke, Lauren R.; Kerber, Lisa; Nyer, Genie; Siemens, Kammi; Clark, Carol

    2007-01-01

    Background: Dental disease is one of the leading causes of school absenteeism for children. This article describes the creation and evolution of the St. David's Dental Program, a mobile school-based dental program for children. Methods: The dental program is a collaboration of community partners in Central Texas that provides free dental care to…

  12. Cytogenetic Evaluation of the Physiological Saline Extract of a Newly Developed Dental Material "ORMO-48".

    PubMed

    Mohanan, P V; Mol, Lizzy

    2011-07-01

    The ORMO-48 is a new indigenous material for dental applications, developed by the Dental Products Laboratory of our Institute. The aim of the present study was to evaluate the genotoxic effect of an indigenously developed dental material in Swiss albino mice. The genotoxic effect was evaluated by micronucleus and chromosomal aberration tests. Two grams of dental material was extracted in 10.0 ml of physiological saline at 70°C for 24 h. The extract was cooled to room temperature and was used for the experiment. The experimental designed had three groups each (six mice in each group) for micronucleus and chromosomal aberration tests. The first, second, and third groups were given a single exposure of physiological saline alone (control), dental material's extract (test), and cyclophosphamide (positive control) respectively for micronucleus and chromosomal aberration tests. The result of the study indicated that, the percentage of micronucleated PCE (polychromatic erythrocytes) and NCE (normochromatic erythrocytes) induced by the dental material (extract) treated group was well comparable with control group, whereas the positive control induced significantly high (P < 0.001) micronucleated PCE when compared to control. The PCE and NCE ratio of the dental material extract treated group was similar to that of control group. The chromosomal anomalies such as chromatid/chromosomal breaks, centric rings, exchanges, dicentric, and acentric fragments were evaluated. The result showed that the anomalies of the dental material extract treated group were similar to control group, however, significant anomalies were observed in the cyclophosphamide treated group. Hence, the present study concluded that the indigenously developed biocompatible dental material, ORMO-48 is non genotoxic at our laboratory conditions.

  13. Focus on Fluorides: Update on the Use of Fluoride for the Prevention of Dental Caries

    PubMed Central

    Carey, Clifton M.

    2014-01-01

    Declarative Title: Improving the efficacy of fluoride therapies reduces dental caries and lowers fluoride exposure. Background Fluoride is delivered to the teeth systemically or topically to aid in the prevention of dental caries. Systemic fluoride from ingested sources is in blood serum and can be deposited only in teeth that are forming in children. Topical fluoride is from sources such as community water, processed foods, beverages, toothpastes, mouthrinses, gels, foams, and varnishes. The United States Centers for Disease Control and Prevention (CDC) and the American Dental Association (ADA) have proposed changes in their long standing recommendations for the amount of fluoride in community drinking water in response to concerns about an increasing incidence of dental fluorosis in children. Current research is focused on the development of strategies to improve fluoride efficacy. The purpose of this update is to inform the reader about new research and policies related to the use of fluoride for the prevention of dental caries. Methods Reviews of the current research and recent evidence based systematic reviews on the topics of fluoride are presented. Topics discussed include: updates on community water fluoridation research and policies; available fluoride in dentifrices; fluoride varnish compositions, use, and recommendations; and other fluoride containing dental products. This update provides insights into current research and discusses proposed policy changes for the use of fluoride for the prevention of dental caries. Conclusions The dental profession is adjusting their recommendations for fluoride use based on current observations of the halo effect and subsequent outcomes. The research community is focused on improving the efficacy of fluoride therapies thus reducing dental caries and lowering the amount of fluoride required for efficacy. PMID:24929594

  14. The Level of Dental Anxiety and Dental Status in Adult Patients

    PubMed Central

    Dobros, Katarzyna; Hajto-Bryk, Justyna; Wnek, Anna; Zarzecka, Joanna; Rzepka, Dominik

    2014-01-01

    Background: The present study aimed to assess potential correlation between dental anxiety and overall dental status in adult patients, in consideration of the frequency of dental appointments and individual dental hygiene practices. Materials and Methods: Individual dental anxiety levels were assessed with the aid of the Corah’s dental anxiety scale (DAS). The study embraced 112 patients of the University Dental Clinic, Kraków. Following clinical and X-ray exams, respectively, decayed, missing and filled teeth (DMFT) index and dental treatment index (DTI) were computed for each study subject. Results: Mean DAS among the 112 subjects under study was 9.41 standard deviation (SD = 3.36). Mean DMFT value was 15.86 (SD = 7.00), whereas DTI value was 0.76 (SD = 0.27). The number of decayed teeth and an individual dental anxiety level were found to be correlated (r = 0.26). Higher dental anxiety correlated with lower DTI value (r = −0.22) and lesser frequency of dental appointments (r = 0.22). Conclusions: Individual dental anxiety level appears to impact overall dental status, frequency of dental appointments and everyday oral health practices. Every conceivable effort should therefore be undertaken with a view to effectively diminishing dental anxiety levels in the patients. How to cite the article: Dobros K, Hajto-Bryk J, Wnęk A, Zarzecka J, Rzepka D. The level of dental anxiety and dental status in adult patients. J Int Oral Health 2014;6(3):11-4. PMID:25083026

  15. Fate map of the dental mesenchyme: dynamic development of the dental papilla and follicle.

    PubMed

    Rothová, Michaela; Peterková, Renata; Tucker, Abigail S

    2012-06-15

    At the bud stage of tooth development the neural crest derived mesenchyme condenses around the dental epithelium. As the tooth germ develops and proceeds to the cap stage, the epithelial cervical loops grow and appear to wrap around the condensed mesenchyme, enclosing the cells of the forming dental papilla. We have fate mapped the dental mesenchyme, using in vitro tissue culture combined with vital cell labelling and tissue grafting, and show that the dental mesenchyme is a much more dynamic population then previously suggested. At the bud stage the mesenchymal cells adjacent to the tip of the bud form both the dental papilla and dental follicle. At the early cap stage a small population of highly proliferative mesenchymal cells in close proximity to the inner dental epithelium and primary enamel knot provide the major contribution to the dental papilla. These cells are located between the cervical loops, within a region we have called the body of the enamel organ, and proliferate in concert with the epithelium to create the dental papilla. The condensed dental mesenchymal cells that are not located between the body of the enamel organ, and therefore are at a distance from the primary enamel knot, contribute to the dental follicle, and also the apical part of the papilla, where the roots will ultimately develop. Some cells in the presumptive dental papilla at the cap stage contribute to the follicle at the bell stage, indicating that the dental papilla and dental follicle are still not defined populations at this stage. These lineage-tracing experiments highlight the difficulty of targeting the papilla and presumptive odontoblasts at early stages of tooth development. We show that at the cap stage, cells destined to form the follicle are still competent to form dental papilla specific cell types, such as odontoblasts, and produce dentin, if placed in contact with the inner dental epithelium. Cell fate of the dental mesenchyme at this stage is therefore determined

  16. The use of dental services for children: implications of the 2010 dental reform in Israel.

    PubMed

    Shahrabani, Shosh; Benzion, Uri; Machnes, Yaffa; Gal, Assaf

    2015-02-01

    Routine dental examinations for children are important for early diagnosis and treatment of dental problems. The level of dental morbidity among Israeli children is higher than the global average. A July 2010 reform of Israel's National Health Insurance Law gradually offers free dental services for children up to age 12. The study examines the use of dental services for children and the factors affecting mothers' decision to take their children for routine checkups. In addition, the study examines the impact of the reform on dental checkups for children in various populations groups. A national representative sample comprising 618 mothers of children aged 5-18 was surveyed by telephone. The survey integrated the principles of the health beliefs model and socio-demographic characteristics. The results show that mothers' decision to take their children for dental checkups is affected by their socio-demographic status and by their health beliefs with respect to dental health. After the reform, the frequency of children's dental checkups significantly increased among vulnerable populations. Therefore, the reform has helped reduce gaps in Israeli society regarding children's dental health. Raising families' awareness of the reform and of the importance of dental health care together with expanding national distribution of approved dental clinics can increase the frequency of dental checkups among children in Israel.

  17. Child Dental Neglect: A Short Review

    PubMed Central

    Ramazani, Nahid

    2014-01-01

    Context: Child dental neglect is a terrible tragedy with a high prevalence. Dealing with this issue is important regarding psychological and physical health policies. The current review was conducted to provide health professionals insight into the different aspects of child dental neglect as reported in previous literature. Evidence Acquisition: Our review was prepared through an electronic search using Pub Med, Science Direct, Medline, Google, Cochran Library, Google Scholar and EMBASE databases. Relevant papers published since 2000 until now in English, discussing child dental neglect were retrieved. Both original and review papers were included. Eligible articles were fully read by the author. A data form was used to record useful findings. Results: Distinguishing the direct and indirect signs of dental neglect is the first step for improvement of this matter. The dental team are the main professionals who can improve parental knowledge about the consequences of child dental neglect. Victims suffer from short and long-term adverse outcomes. Collaborative attempts need to be made by different health professionals to deal with this problem. Conclusions: Child dental neglect has many long-term impacts. The main professionals who are responsible for identification, intervention and treatment of child dental neglect are dental practitioners. However, other professionals cannot ignore this task. Finally, child dental neglect, despite its derivative outcomes, may be a presentation of a broader maltreatment. PMID:25741483

  18. Dental health status of liver transplant candidates.

    PubMed

    Guggenheimer, James; Eghtesad, Bijan; Close, John M; Shay, Christine; Fung, John J

    2007-02-01

    A prerequisite dental evaluation is usually recommended for potential organ transplant candidates. This is based on the premise that untreated dental disease may pose a risk for infection and sepsis, although there is no evidence that this has occurred in organ transplant candidates or recipients. The purpose of this study was to assess the prevalence of dental disease and oral health behaviors in a sample of liver transplant candidates (LTCs). Oral examinations were conducted on 300 LTCs for the presence of gingivitis, dental plaque, dental caries, periodontal disease, edentulism, and xerostomia. The prevalence of these conditions was compared with oral health data from national health surveys and examined for possible associations with most recent dental visit, smoking, and type of liver disease. Significant risk factors for plaque-related gingivitis included intervals of more than 1 yr since the last dental visit (P = 0.004), smoking (P = 0.03), and diuretic therapy (P = 0.005). Dental caries and periodontal disease were also significantly associated with intervals of more than 1 yr since the last dental visit (P = 0.004). LTCs with viral hepatitis or alcoholic cirrhosis had the highest smoking rate (78.8%). Higher rates of edentulism occurred among older LTCs who were less likely to have had a recent dental evaluation (mean 88 months). In conclusion, intervals of more than 1 yr since the last dental visit, smoking, and diuretic therapy appear to be the most significant determinants of dental disease and the need for a pretransplantation dental screening evaluation in LTCs. Edentulous patients should have periodic examinations for oral cancer.

  19. Mapping the literature of dental assisting.

    PubMed Central

    Hook, S A; Wagner, C F

    1999-01-01

    The purpose of this study was to identify core journals and the databases that provide access to these journals for the field of dental assisting. This study was completed as a part of the Medical Library Association (MLA) Nursing and Allied Health Resources Section's project to map the literature of allied health. There were three original journals selected for analysis using the prescribed methodology, Dental Assistant, the journal of the American Dental Assistants Association; Journal of the CDAA, the journal of the Canadian Dental Assistants' Association; and Dental Teamwork, published by the American Dental Association. Dental Teamwork ceased publication in December 1996; however, it was considered a necessary part of the analysis due to its extensive coverage of dental assisting as well as its numerous scientific articles with references. In Dental Assistant, there were 16 source articles, containing 206 citations. In Dental Teamwork, there were 31 source articles with 308 citations. In Journal of the CDAA, there were only 3 source articles with 14 citations. Bradford's Law of Scattering was applied to the journal citations. Four databases, MEDLINE, the Cumulative Index to Nursing and Allied Health Literature, EMBASE/Excerpta Medica, and HEALTH were analyzed for their coverage of these cited journals. This study may encourage the dental assisting profession to take a close look at its existing journals and to consider enhancing the content of these journals or the publication of additional journals in the field. Dental assistants of today need substantive literature that deals with all aspects of their chosen profession in order to meet the challenges of providing dental health care in the future. PMID:10427427

  20. Communication in dental medicine: importance in motivating elderly dental patients.

    PubMed

    Scutariu, Mihaela Monica; Forna, Norina

    2013-01-01

    Dental services for elderly patients are characterized by a series of particularities related to the vulnerability of this age group, which is affected by various co morbidities, and the diminished physical, cognitive and financial capacities. Finding ways to keep elderly patients coming to a dental office is possible by improving the dentist-patient relationship and implicitly the quality of care by increasing the self-esteem of the elderly and their place in society, by increasing the role of oral health in the quality of life, and here we refer to the pleasure of eating, the pleasant physical aspect and normal diction. The present paper presents the psychological aspects that interfere in the communication process between the dentist and the elderly patient and the changes motivation undergoes when people are in pain. These data can sometimes change the reticent attitude of the dentist towards the elderly patient which is often considered to be a risk patient.

  1. Cytotoxicity and biocompatibility of Zirconia (Y-TZP) posts with various dental cements

    PubMed Central

    Shin, Hyeongsoon; Ko, Hyunjung

    2016-01-01

    Objectives Endodontically treated teeth with insufficient tooth structure are often restored with esthetic restorations. This study evaluated the cytotoxicity and biological effects of yttria partially stabilized zirconia (Y-TZP) blocks in combination with several dental cements. Materials and Methods Pairs of zirconia cylinders with medium alone or cemented with three types of dental cement including RelyX U200 (3M ESPE), FujiCEM 2 (GC), and Panavia F 2.0 (Kuraray) were incubated in medium for 14 days. The cytotoxicity of each supernatant was determined using 3-(4,5-dimethylthiazole-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assays on L929 fibroblasts and MC3T3-E1 osteoblasts. The levels of interleukin-6 (IL-6) mRNA were evaluated by reverse transcription polymerase chain reaction (RT-PCR), and IL-6 protein was evaluated by enzyme-linked immunosorbent assays (ELISA). The data were analyzed using one-way ANOVA and Tukey post-hoc tests. A p < 0.05 was considered statistically significant. Results The MTT assays showed that MC3T3-E1 osteoblasts were more susceptible to dental cements than L929 fibroblasts. The resin based dental cements increased IL-6 expression in L929 cells, but reduced IL-6 expression in MC3T3-E1 cells. Conclusions Zirconia alone or blocks cemented with dental cement showed acceptable biocompatibilities. The results showed resin-modified glass-ionomer based cement less produced inflammatory cytokines than other self-adhesive resin-based cements. Furthermore, osteoblasts were more susceptible than fibroblasts to the biological effects of dental cement. PMID:27508157

  2. Dental Pulp Defence and Repair Mechanisms in Dental Caries

    PubMed Central

    Farges, Jean-Christophe; Alliot-Licht, Brigitte; Renard, Emmanuelle; Ducret, Maxime; Gaudin, Alexis; Smith, Anthony J.; Cooper, Paul R.

    2015-01-01

    Dental caries is a chronic infectious disease resulting from the penetration of oral bacteria into the enamel and dentin. Microorganisms subsequently trigger inflammatory responses in the dental pulp. These events can lead to pulp healing if the infection is not too severe following the removal of diseased enamel and dentin tissues and clinical restoration of the tooth. However, chronic inflammation often persists in the pulp despite treatment, inducing permanent loss of normal tissue and reducing innate repair capacities. For complete tooth healing the formation of a reactionary/reparative dentin barrier to distance and protect the pulp from infectious agents and restorative materials is required. Clinical and in vitro experimental data clearly indicate that dentin barrier formation only occurs when pulp inflammation and infection are minimised, thus enabling reestablishment of tissue homeostasis and health. Therefore, promoting the resolution of pulp inflammation may provide a valuable therapeutic opportunity to ensure the sustainability of dental treatments. This paper focusses on key cellular and molecular mechanisms involved in pulp responses to bacteria and in the pulpal transition between caries-induced inflammation and dentinogenic-based repair. We report, using selected examples, different strategies potentially used by odontoblasts and specialized immune cells to combat dentin-invading bacteria in vivo. PMID:26538821

  3. [Dental care, dental diseases and dentistry in antiquity].

    PubMed

    Józsa, László

    2009-01-01

    Numerous written relicts, belletristic works (poems of Martial, Juvenal, Ovid etc.) indicate that oral hygiene and its tools (toothbrush, toothpick, use of tooth pastes and tooth-powder) were used long before our times. Already ancient people started to remove, file, dye and inlay teeth. The teeth were dyed red, green or black in Egypt, red or brown (with henna or betel) in India, white by Romans. The teeth decoration has a long but forgotten history. The most skillful and artistic work was done by the Maya's between 900 BC and 1500 AD. The modification of contours (more than fifty forms) of the incisors were practiced also in Mesoamerica. Dentistry was surely practiced in ancient Egypt, India, China, Greece and Rome, while odontology and especially suitable dental appliances arose only by Etruscan. Dental prosthesis, including bridges and simple retention bands were invented by the Etruscans 2500 years ago. These Etruscan bridges were worn mostly by females, suggesting that cosmetics was the principal dental concern. Some,--if not all--of the Roman and other prostheses have been purely ornamental. Orthodontic appliances are also Etruscan invention. The holes caused by caries were filled with garlic, incense, caraway seed in Egypt, with wood or lead in Rome, and with "silver-paste" (amalgam) in ancient China. The toothache was cured with poppy-tee, or hashish and nightshade plants (Solanaceae) in Egypt, Greece, Roman Empire while with coca (Erythroxylon coca) in South-America.

  4. A dental public health approach based on computational mathematics: Monte Carlo simulation of childhood dental decay.

    PubMed

    Tennant, Marc; Kruger, Estie

    2013-02-01

    This study developed a Monte Carlo simulation approach to examining the prevalence and incidence of dental decay using Australian children as a test environment. Monte Carlo simulation has been used for a half a century in particle physics (and elsewhere); put simply, it is the probability for various population-level outcomes seeded randomly to drive the production of individual level data. A total of five runs of the simulation model for all 275,000 12-year-olds in Australia were completed based on 2005-2006 data. Measured on average decayed/missing/filled teeth (DMFT) and DMFT of highest 10% of sample (Sic10) the runs did not differ from each other by more than 2% and the outcome was within 5% of the reported sampled population data. The simulations rested on the population probabilities that are known to be strongly linked to dental decay, namely, socio-economic status and Indigenous heritage. Testing the simulated population found DMFT of all cases where DMFT<>0 was 2.3 (n = 128,609) and DMFT for Indigenous cases only was 1.9 (n = 13,749). In the simulation population the Sic25 was 3.3 (n = 68,750). Monte Carlo simulations were created in particle physics as a computational mathematical approach to unknown individual-level effects by resting a simulation on known population-level probabilities. In this study a Monte Carlo simulation approach to childhood dental decay was built, tested and validated.

  5. Mercury in dental amalgam: Are our health care workers at risk?

    PubMed

    Sahani, M; Sulaiman, N S; Tan, B S; Yahya, N A; Anual, Z F; Mahiyuddin, W R Wan; Khan, M F; Muttalib, K A

    2016-11-01

    Dental amalgam in fillings exposes workers to mercury. The exposure to mercury was investigated among 1871 dental health care workers. The aim of the study was to evaluate the risk of mercury exposure among dental compared to nondental health care workers and to determine other risk factors for mercury exposure. Respondents answered questionnaires to obtain demographic, personal, professional, and workplace information and were examined for their own amalgam fillings. Chronic mercury exposure was assessed through urinary mercury levels. In total, 1409 dental and 462 nondental health care workers participated in the study. Median urine mercury levels for dental and nondental health care workers were 2.75 μg/L (interquartile range [IQR] = 3.0175) and 2.66 μg/L (IQR = 3.04) respectively. For mercury exposure, there were no significant risk factor found among the workers involved within the dental care. The Mann-Whitney test showed that urine mercury levels were significantly different between respondents who eat seafood more than 5 times per week compared to those who eat it less frequently or not at all (p = 0.003). The urinary mercury levels indicated significant difference between dental workers in their practice using squeeze cloths (Mann-Whitney test, p = 0.03). Multiple logistic regression showed that only the usage of cosmetic products that might contain mercury was found to be significantly associated with the urinary mercury levels (odds ratio [OR] = 15.237; CI: 3.612-64.276). Therefore, mean urinary mercury levels of health care workers were low. Exposure to dental amalgam is not associated with high mercury exposure. However, usage of cosmetic products containing mercury and high seafood consumption may lead to the increase of exposure to mercury.

  6. Impact of a risk management plan on Legionella contamination of dental unit water.

    PubMed

    Leoni, Erica; Dallolio, Laura; Stagni, Francesca; Sanna, Tiziana; D'Alessandro, Giovanni; Piana, Gabriela

    2015-02-23

    The study aimed to assess the prevalence of Legionella spp. in dental unit waterlines of a dental clinic and to verify whether the microbiological parameters used as indicators of water quality were correlated with Legionella contamination. A risk management plan was subsequently implemented in the dental health care setting, in order to verify whether the adopted disinfection protocols were effective in preventing Legionella colonization. The water delivered from syringes and turbines of 63 dental units operating in a dental clinic, was monitored for counts of the heterotrophic bacteria P. aeruginosa and Legionella spp. (22 °C and 37 °C). At baseline, output water from dental units continuously treated with disinfection products was more compliant with the recommended standards than untreated and periodically treated water. However, continuous disinfection was still not able to prevent contamination by Legionella and P. aeruginosa. Legionella was isolated from 36.4%, 24.3% and 53.3% of samples from untreated, periodically and continuously treated waterlines, respectively. The standard microbiological parameters used as indicators of water quality proved to be unreliable as predictors of the presence of Legionella, whose source was identified as the tap water used to supply the dental units. The adoption of control measures, including the use of deionized water in supplying the dental unit waterlines and the application of a combined protocol of continuous and periodic disinfection, with different active products for the different devices, resulted in good control of Legionella contamination. The efficacy of the measures adopted was mainly linked to the strict adherence to the planned protocols, which placed particular stress on staff training and ongoing environmental monitoring.

  7. Impact of a Risk Management Plan on Legionella Contamination of Dental Unit Water

    PubMed Central

    Leoni, Erica; Dallolio, Laura; Stagni, Francesca; Sanna, Tiziana; D’Alessandro, Giovanni; Piana, Gabriela

    2015-01-01

    The study aimed to assess the prevalence of Legionella spp. in dental unit waterlines of a dental clinic and to verify whether the microbiological parameters used as indicators of water quality were correlated with Legionella contamination. A risk management plan was subsequently implemented in the dental health care setting, in order to verify whether the adopted disinfection protocols were effective in preventing Legionella colonization. The water delivered from syringes and turbines of 63 dental units operating in a dental clinic, was monitored for counts of the heterotrophic bacteria P. aeruginosa and Legionella spp. (22 °C and 37 °C). At baseline, output water from dental units continuously treated with disinfection products was more compliant with the recommended standards than untreated and periodically treated water. However, continuous disinfection was still not able to prevent contamination by Legionella and P. aeruginosa. Legionella was isolated from 36.4%, 24.3% and 53.3% of samples from untreated, periodically and continuously treated waterlines, respectively. The standard microbiological parameters used as indicators of water quality proved to be unreliable as predictors of the presence of Legionella, whose source was identified as the tap water used to supply the dental units. The adoption of control measures, including the use of deionized water in supplying the dental unit waterlines and the application of a combined protocol of continuous and periodic disinfection, with different active products for the different devices, resulted in good control of Legionella contamination. The efficacy of the measures adopted was mainly linked to the strict adherence to the planned protocols, which placed particular stress on staff training and ongoing environmental monitoring. PMID:25711357

  8. N- and O-linked glycosylation site profiling of the human basic salivary proline-rich protein 3M.

    PubMed

    Manconi, Barbara; Cabras, Tiziana; Sanna, Monica; Piras, Valentina; Liori, Barbara; Pisano, Elisabetta; Iavarone, Federica; Vincenzoni, Federica; Cordaro, Massimo; Faa, Gavino; Castagnola, Massimo; Messana, Irene

    2016-05-01

    In the present study, we show that the heterogeneous mixture of glycoforms of the basic salivary proline-rich protein 3M, encoded by PRB3-M locus, is a major component of the acidic soluble fraction of human whole saliva in the first years of life. Reversed-phase high-performance liquid chromatography with high-resolution electrospray ionization mass spectrometry analysis of the intact proteoforms before and after N-deglycosylation with Peptide-N-Glycosidase F and tandem mass spectrometry sequencing of peptides obtained after Endoproteinase GluC digestion allowed the structural characterization of the peptide backbone and identification of N- and O-glycosylation sites. The heterogeneous mixture of the proteoforms derives from the combination of 8 different neutral and sialylated glycans O-linked to Threonine 50, and 33 different glycans N-linked to Asparagine residues at positions 66, 87, 108, 129, 150, 171, 192, and 213.

  9. Confinement bifurcation initiated by plasma current profile and toroidal electric field perturbations in the TUMAN-3M tokamak

    NASA Astrophysics Data System (ADS)

    Askinazi, L. G.; Bulanin, V. V.; Kornev, V. A.; Krikunov, S. V.; Lebedev, S. V.; Tukachinsky, A. S.; Vildjunas, M. I.; Zhubr, N. A.

    2011-03-01

    The results of the experimental study of confinement mode bifurcation performed on the TUMAN-3M tokamak are reported. As a trigger of confinement mode switching, plasma current ramp-up/-down or magnetic compression/decompression is used. It is found that the possibility and direction of confinement mode switching are correlated not with plasma current profile perturbation (peaking or broadening) but with the sign of toroidal electric field perturbation. A model connecting confinement bifurcation and toroidal electric field perturbation through the perturbation of the radial electric field is used to describe the phenomena observed in all eight scenarios investigated. This model ascribes the radial electric field generation to the non-compensated Ware drift of banana electrons at the TUMAN-3M peripheral plasma, where \

  10. On the multi-index (3 m-parametric) Mittag-Leffler functions, fractional calculus relations and series convergence

    NASA Astrophysics Data System (ADS)

    Paneva-Konovska, Jordanka

    2013-10-01

    In this paper we consider a family of 3 m-indices generalizations of the classical Mittag-Leffler function, called multi-index (3 m-parametric) Mittag-Leffler functions. We survey the basic properties of these entire functions, find their order and type, and new representations by means of Mellin-Barnes type contour integrals, Wright p Ψ q -functions and Fox H-functions, asymptotic estimates. Formulas for integer and fractional order integration and differentiations are found, and these are extended also for the operators of the generalized fractional calculus (multiple Erdélyi-Kober operators). Some interesting particular cases of the multi-index Mittag-Leffler functions are discussed. The convergence of series of such type functions in the complex plane is considered, and analogues of the Cauchy-Hadamard, Abel, Tauber and Littlewood theorems are provided.

  11. On the multi-index (3m-parametric) Mittag-Leffler functions, fractional calculus relations and series convergence

    NASA Astrophysics Data System (ADS)

    Paneva-Konovska, Jordanka

    2013-10-01

    In this paper we consider a family of 3m-indices generalizations of the classical Mittag-Leffler function, called multi-index (3m-parametric) Mittag-Leffler functions. We survey the basic properties of these entire functions, find their order and type, and new representations by means of Mellin-Barnes type contour integrals, Wright pΨq-functions and Fox H-functions, asymptotic estimates. Formulas for integer and fractional order integration and differentiations are found, and these are extended also for the operators of the generalized fractional calculus (multiple Erdélyi-Kober operators). Some interesting particular cases of the multi-index Mittag-Leffler functions are discussed. The convergence of series of such type functions in the complex plane is considered, and analogues of the Cauchy-Hadamard, Abel, Tauber and Littlewood theorems are provided.

  12. The microbiology of the acute dental abscess.

    PubMed

    Robertson, D; Smith, A J

    2009-02-01

    The acute dental abscess is frequently underestimated in terms of its morbidity and mortality. The risk of potential serious consequences arising from the spread of a dental abscess is still relevant today with many hospital admissions for dental sepsis. The acute dental abscess is usually polymicrobial comprising facultative anaerobes, such as viridans group streptococci and the Streptococcus anginosus group, with predominantly strict anaerobes, such as anaerobic cocci, Prevotella and Fusobacterium species. The use of non-culture techniques has expanded our insight into the microbial diversity of the causative agents, identifying such organisms as Treponema species and anaerobic Gram-positive rods such as Bulleidia extructa, Cryptobacterium curtum and Mogibacterium timidum. Despite some reports of increasing antimicrobial resistance in isolates from acute dental infection, the vast majority of localized dental abscesses respond to surgical treatment, with antimicrobials limited to spreading and severe infections. The microbiology and treatment of the acute localized abscess and severe spreading odontogenic infections are reviewed.

  13. Optical detection dental disease using polarized light

    DOEpatents

    Everett, Matthew J.; Colston, Jr., Billy W.; Sathyam, Ujwal S.; Da Silva, Luiz B.; Fried, Daniel

    2003-01-01

    A polarization sensitive optical imaging system is used to detect changes in polarization in dental tissues to aid the diagnosis of dental disease such as caries. The degree of depolarization is measured by illuminating the dental tissue with polarized light and measuring the polarization state of the backscattered light. The polarization state of this reflected light is analyzed using optical polarimetric imaging techniques. A hand-held fiber optic dental probe is used in vivo to direct the incident beam to the dental tissue and collect the reflected light. To provide depth-resolved characterization of the dental tissue, the polarization diagnostics may be incorporated into optical coherence domain reflectometry and optical coherence tomography (OCDR/OCT) systems, which enables identification of subsurface depolarization sites associated with demineralization of enamel or bone.

  14. Diagnosis and management of dental wear.

    PubMed

    Harpenau, Lisa A; Noble, Warden H; Kao, Richard T

    2012-01-01

    Dental wear is loss of tooth structure resulting from erosion, attrition, abrasion and, possibly, abfraction. Clinical/experimental data suggest no single damaging mechanism, but rather simultaneous interaction of these destructive processes. The most important interaction is abrasion/attrition potentiated by dental erosion. Awareness of this pathosis is not well-appreciated by the public and dental professionals because the signs may be subtle. This article focuses on recognizing, diagnosing and managing dental wear. Dental wear is a challenging problem for clinicians because of the subtlety of early changes; confusion about the etiology of the problem; and the dilemma of when or how to manage the etiology. Unfortunately, failure to recognize and manage the process often results in inaction until the breakdown is severe. At that point, the structural breakdown is so advanced that major rehabilitative treatment often is needed. This introductory article discusses diagnosing and managing dental wear.

  15. Personality types of Chinese dental school applicants.

    PubMed

    Wu, Shengjun; Miao, Danmin; Zhu, Xia; Luo, Zhengxue; Liu, Xufeng

    2007-12-01

    This his article reports the findings of a study conducted to investigate the personality types of Chinese dental school applicants. The Chinese version of the Myers-Briggs Type Indicator (MBTI) (Form G) was used to assess the personality styles of 332 dental school applicants from the mainland of China. The results of the MBTI for Chinese dental school applicants were compared with a previous study of applicants from the U.K. A higher percentage of this group of Chinese applicants scored higher for Introversion (I) than Extroversion (E); both Chinese and English applicants preferred Judging (J) to Perceiving (P). The dominant personality types in Chinese applicants were ISTJ, ESTJ, and ISFP. The findings suggest that the personality types of Chinese dental students may be somewhat different from the personality profiles exhibited by dental students from other nations. The findings may be of value to individuals who desire to investigate personality type differences among dental students with different cultural backgrounds.

  16. Engineered proteins with Pumilio/fem-3 mRNA binding factor scaffold to manipulate RNA metabolism.

    PubMed

    Wang, Yang; Wang, Zefeng; Tanaka Hall, Traci M

    2013-08-01

    Pumilio/fem-3 mRNA binding factor proteins are characterized by a sequence-specific RNA-binding domain. This unique single-stranded RNA recognition module, whose sequence specificity can be reprogrammed, has been fused with functional modules to engineer protein factors with various functions. We summarize the advances made with respect to developing RNA regulatory tools, as well as opportunities for the future.

  17. Dental archives based on images

    NASA Astrophysics Data System (ADS)

    Dostalova, Tatjana; Smutny, Vladimir

    1997-05-01

    This paper describes the Orthoscope, an equipment for acquisition, processing, and archiving of images of patients mouth or skin. The equipment can capture and process images of single tooth, group of teeth or the whole dental arc. A dentist can easily observe the situation in mouth, demonstrate intended plan of treatment to patient and document its results. A dermatologist can evaluate treatment progress. Unlike other methods, our device shows geometrically undistorted calibrated image.The presented equipment is intended for daily practice. The image processing module is connected to an insurance office system and medical archives. This eliminates time consuming literal description of the patient dental/dermatological status. The images can be used later checking of the diagnosis and treatment.

  18. Soft skills and dental education.

    PubMed

    Gonzalez, M A G; Abu Kasim, N H; Naimie, Z

    2013-05-01

    Soft skills and hard skills are essential in the practice of dentistry. While hard skills deal with technical proficiency, soft skills relate to a personal values and interpersonal skills that determine a person's ability to fit in a particular situation. These skills contribute to the success of organisations that deal face-to-face with clients. Effective soft skills benefit the dental practice. However, the teaching of soft skills remains a challenge to dental schools. This paper discusses the different soft skills, how they are taught and assessed and the issues that need to be addressed in their teaching and assessment. The use of the module by the Faculty of Dentistry, University of Malaya for development of soft skills for institutions of higher learning introduced by the Ministry of Higher Education, Malaysia.

  19. Dental gemination: report of case.

    PubMed

    Hernandez-Guisado, J M; Torres-Lagares, D; Infante-Cossio, P; Gutierrez-Perez, J L

    2002-01-01

    Dental anomalies can be classified in different groups: anomalies of volume, anomalies of number, anomalies of form, anomalies of position and anomalies by union. Of the latter, we distinguish between fusion, alveolus-dental gemination, concrescence, coalescence and anchylosis. Gemination is more frequent in the anterior teeth, although it can also affect the bicuspids and molars, being an anomaly of infrequent union (prevalence 0.5%). We present the case of a young male patient age 19, without medical antecedents of interest, that goes to consultation for repeated inflammatory accidents at level of the inferior left retromolar area. These episodes are caused by a semi-impacted inferior third molar that is fused to a supernumerary fourth molar, sharing its roots, crown, pulp chambers and canals. After the appropriate radiologic study and suitable planning, the semi-impacted third molar was extracted under local anaesthesia and without any other complications during or after the operation.

  20. Oral biopsy in dental practice.

    PubMed

    Mota-Ramírez, Amparo; Silvestre, Francisco Javier; Simó, Juan Manuel

    2007-11-01

    The conclusions drawn from the study of an oral biopsy are considered essential for the definitive diagnosis of diseases of the oral mucosa, and for the subsequent planning of appropriate treatment. Although the obtainment of biopsies is widely used in all medical fields, the practice is not so widespread in dental practice--fundamentally because of a lack of awareness of the procedure among dental professionals. In this context, it must be taken into account that the early diagnosis of invasive oral malignancy may be critical for improving the patient prognosis. However, in some cases the results are adversely affected by incorrect manipulation of the biopsy material. The present study provides an update on the different biopsy sampling techniques and their application. Such familiarization in turn will contribute to knowledge of the material and instruments required for correct biopsy performance in dentistry, as well as of the material required for correct sample storage and transport.

  1. [Periodontal reaction versus dental movement].

    PubMed

    Ionescu, Ecaterina; Preoteasa, Elena; Duduca, Ioana

    2005-01-01

    In orthodontics the relation between the force (natural or artificial) and the structures that must be modified or led towards a normal situation is in fact a complex equation would multiple aspects determined by the biological part. The orthodontic forces imply, both in action as in effect, all the elements of the dental system, meaning bones, teeth, periodontal tissue. On the other side, the structures of the dental system may help, limit ate, or even erase the action of the orthodontic forces. Our article brings into discussion the relation between the teeth' sustaining structures and their movements determined by the orthodontic forces both as a reaction to a therapeutical treatment and as their direct implication into the result and the stability of the orthodontic treatment, on a long-term.

  2. Dismantling discrimination in dental education.

    PubMed Central

    Dummett, C. O.

    1996-01-01

    In existence for more than 100 years, the schools of medicine and dentistry of Howard University and Meharry Medical College have been responsible for training the majority of African-American physicians and dentists. The dissolution of the doctrine of "separate but equal" has resulted in the acceptance of larger numbers of African-American health professionals to America's medical and dental educational institutions. The University of Tennessee School of Dentistry is a primary example of a formerly segregated institution that has changed its policies and presently possesses a respectable number of African-American dental alumni. In a recent acknowledgment of this fact on Alumni Day, black graduates of this University celebrated and sponsored a program to increase the number of African-American matriculants at the school. PMID:8764529

  3. Dismantling discrimination in dental education.

    PubMed

    Dummett, C O

    1996-07-01

    In existence for more than 100 years, the schools of medicine and dentistry of Howard University and Meharry Medical College have been responsible for training the majority of African-American physicians and dentists. The dissolution of the doctrine of "separate but equal" has resulted in the acceptance of larger numbers of African-American health professionals to America's medical and dental educational institutions. The University of Tennessee School of Dentistry is a primary example of a formerly segregated institution that has changed its policies and presently possesses a respectable number of African-American dental alumni. In a recent acknowledgment of this fact on Alumni Day, black graduates of this University celebrated and sponsored a program to increase the number of African-American matriculants at the school.

  4. Heat flux measurements of Tb3M series (M=Co, Rh and Ru): Specific heat and magnetocaloric properties

    NASA Astrophysics Data System (ADS)

    Monteiro, J. C. B.; Lombardi, G. A.; dos Reis, R. D.; Freitas, H. E.; Cardoso, L. P.; Mansanares, A. M.; Gandra, F. G.

    2016-12-01

    We report on the magnetic properties and magnetocaloric effect (MCE) for the Tb3M series, with M=Co, Rh and Ru, obtained using a heat flux technique. The specific heat of Tb3Co and Tb3Rh are very similar, with a first order type transition occurring around 6 K below the magnetic ordering temperature without any corresponding feature on the magnetization. The slightly enhanced electronic specific heat, the Debye temperature around 150 K and the presence of the magnetic specific heat well above the ordering temperature are also characteristic of many other compounds of the R3M family (R=Rare Earth). The specific heat for Tb3Ru, however, presents two peaks at 37 K and 74 K. The magnetization shows that below the first peak the system presents an antiferromagnetic behavior and is paramagnetic above 74 K. We obtained a magnetocaloric effect for M=Co and Rh, -∆S=12 J/kg K, but for Tb3Ru it is less than 3 J/kg K (μ0∆H=5 T). We believe that the experimental results show that the MCE is directly related with the process of hybridization of the (R)5d-(M)d electrons that occurs in the R3M materials.

  5. Design of multichord Hα detector arrays for the U-3M torsatron and identification of rotating plasma perturbations

    NASA Astrophysics Data System (ADS)

    Dreval, M. B.; Shapoval, A. M.; Ozherelyev, F. I.; Makhov, M. M.

    2016-07-01

    An Hα camera has been designed and installed in the U-3M torsatron for spatially and temporally resolved measurements. This device provides fast measurements of the emission brightness profile in the noisy environment of the radio frequency (RF) heated plasma. Unusual topology of diagnostics and the data acquisition system are applied. All the system components, including digitizers, are assembled in a single unit. It allows the suppression of a low-frequency electromagnetic interference by eliminating the ground loops. And the suppression of RF noises is achieved by eliminating the signal interface cables and digital interface cables in the design. The Wi-Fi interface is used to prevent a ground loop in the data transfer stage. The achieved sensitivity of our diagnostics is high enough for measuring the Hα emission from the low-density (ne ≈ (1-2)ṡ1010 cm-3) plasma with a temporal resolution of about 20 μs in the noisy environment. Different types of Hα emission fluctuations within the frequency range of 1-5 kHz and poloidal mode numbers m = 0 and m = 5 have been observed in U-3M. A simple technique of the line-of-sight data analysis, based on the U-3M magnetic surface asymmetry, is proposed and used for the spatial localization of the rotating mode and for the determination of mode numbers and its poloidal rotation direction using a single Hα array.

  6. Double L{sub 3}M ionization of Pd induced by impact with medium-energy electrons

    SciTech Connect

    Cao, W.; Dousse, J.-Cl.; Hoszowska, J.; Kayser, Y.; Schenker, J.-L.; Kavcic, M.; Zitnik, M.

    2011-02-15

    The electron-induced L{sub 3}M two-step double ionization cross sections of metallic Pd were determined experimentally for incident electron beam energies ranging from the double ionization threshold up to 18 keV. The double L{sub 3}M ionization cross sections were derived from the intensity ratios (I{sub L{alpha}M}:I{sub L{alpha}}) of the resolved M satellites to the parent diagram lines. The sample was bombarded with monoenergetic electrons from an energy-tunable 20-kV electron gun. The diagram and M-satellite x-ray lines were measured by means of high-resolution x-ray spectroscopy, using a reflection-type von Hamos bent crystal spectrometer. The two-step partial cross sections were determined by subtracting from the measured total double ionization cross sections the contributions due to the shake process and L{sub 1}-L{sub 3}M{sub 4,5} Coster-Kronig transitions. Despite the thick target employed in the present study, the dependence of the two-step cross sections on the incoming electron energy could be derived using a target slice decomposition method. It is shown that the obtained energy dependence can be well reproduced by the semiempirical parametrization model of Pattard and Rost.

  7. Deposition of LaMO3 (M=Ni,Co,Cr,Al)-Oriented Films by Spray Combustion Flame Technique

    NASA Astrophysics Data System (ADS)

    Ichinose, Hiromichi; Shiwa, Yuzo; Nagano, Masamitsu

    1994-10-01

    LaMO3 (M=Ni,Co,Cr,Al) films were prepared on sintered alumina, sapphire (001) and MgO(100) at 500 900°C by spraying ultrasonically atomized aqueous solutions of nitrates into a combustion flame (spray combustion flame technique). LaNiO3 and LaCoO3 on MgO(100) crystallized in high-temperature phases (cubic) while LaCrO3 and LaAlO3 crystallized in room-temperature phases. LaMO3 (M=Ni,Co,Cr,Al) films on MgO(100) were highly oriented to (100), (100), (001) and (100), respectively, while the films on sintered alumina and sapphire were not. The electric resistivities of the dense LaMO3 (M=Ni,Co,Cr) films were as low as those of bulk ceramics. LaNiO3 film deposited on MgO above 700°C showed the lowest resistivity of about 6×10-6 Ω m. It was suggested that the reactivities of the constituent metal atoms with OH in the flame are associated with the preferred phase and the morphology of the films.

  8. Anti-CD3 mAb treatment cures PDL1-/-.NOD mice of diabetes but precipitates fatal myocarditis.

    PubMed

    Mfarrej, Bechara; Keir, Mary; Dada, Shirine; Trikudanathan, Subbulaxmi; Sayegh, Mohamed H; Sharpe, Arlene H; Guleria, Indira

    2011-07-01

    Anti-CD3 mAb is an effective therapy that can reverse diabetes in NOD mice and has therapeutic potential in patients with type 1 diabetes (T1D). We administered anti-CD3 to PDL1-/-.NOD mice in order to determine whether this treatment would reverse the development of diabetes in these mice. Mice injected with anti-CD3 mAb neonatally were protected from T1D. However, all of these anti-CD3 mAb treated PDL1-/-.NOD mice developed a wasting disease between 12 and 20 weeks of age with sudden deterioration and weight loss, leading to death within 3-5 days of development of illness. Histology revealed severe inflammation in the heart and skeletal muscles. These results suggest that deficiency of PDL1 in NOD background has the potential to lead to immune-mediated tissue damage in organs other than the pancreas, but this cannot be appreciated in PDL1-/-.NOD mice as the mice develop T1D at an early age and die from diabetes prior to manifesting other autoimmune diseases.

  9. Critical appraisal: dental amalgam update--part II: biological effects.

    PubMed

    Wahl, Michael J; Swift, Edward J

    2013-12-01

    Dental amalgam restorations have been controversial for over 150 years. In Part I of this Critical Appraisal, the clinical efficacy of dental amalgam was updated. Here in Part II, the biological effects of dental amalgam are addressed.

  10. 21 CFR 872.3980 - Endosseous dental implant accessories.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... abutments, aid in the fabrication of dental prosthetics, and be used as an accessory with endosseous dental..., countertorque devices, placement and removal tools, laboratory pieces used for fabrication of dental...

  11. 21 CFR 872.3980 - Endosseous dental implant accessories.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... abutments, aid in the fabrication of dental prosthetics, and be used as an accessory with endosseous dental..., countertorque devices, placement and removal tools, laboratory pieces used for fabrication of dental...

  12. 21 CFR 872.3980 - Endosseous dental implant accessories.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... abutments, aid in the fabrication of dental prosthetics, and be used as an accessory with endosseous dental..., countertorque devices, placement and removal tools, laboratory pieces used for fabrication of dental...

  13. 21 CFR 872.3980 - Endosseous dental implant accessories.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... abutments, aid in the fabrication of dental prosthetics, and be used as an accessory with endosseous dental..., countertorque devices, placement and removal tools, laboratory pieces used for fabrication of dental...

  14. Chronic fluoride toxicity: dental fluorosis.

    PubMed

    Denbesten, Pamela; Li, Wu

    2011-01-01

    Dental fluorosis occurs as a result of excess fluoride ingestion during tooth formation. Enamel fluorosis and primary dentin fluorosis can only occur when teeth are forming, and therefore fluoride exposure (as it relates to dental fluorosis) occurs during childhood. In the permanent dentition, this would begin with the lower incisors, which complete mineralization at approximately 2-3 years of age, and end after mineralization of the third molars. The white opaque appearance of fluorosed enamel is caused by a hypomineralized enamel subsurface. With more severe dental fluorosis, pitting and a loss of the enamel surface occurs, leading to secondary staining (appearing as a brown color). Many of the changes caused by fluoride are related to cell/matrix interactions as the teeth are forming. At the early maturation stage, the relative quantity of amelogenin protein is increased in fluorosed enamel in a dose-related manner. This appears to result from a delay in the removal of amelogenins as the enamel matures. In vitro, when fluoride is incorporated into the mineral, more protein binds to the forming mineral, and protein removal by proteinases is delayed. This suggests that altered protein/mineral interactions are in part responsible for retention of amelogenins and the resultant hypomineralization that occurs in fluorosed enamel. Fluoride also appears to enhance mineral precipitation in forming teeth, resulting in hypermineralized bands of enamel, which are then followed by hypomineralized bands. Enhanced mineral precipitation with local increases in matrix acidity may affect maturation stage ameloblast modulation, potentially explaining the dose-related decrease in cycles of ameloblast modulation from ruffle-ended to smooth-ended cells that occur with fluoride exposure in rodents. Specific cellular effects of fluoride have been implicated, but more research is needed to determine which of these changes are relevant to the formation of fluorosed teeth. As further

  15. Dental anomalies in mental patients.

    PubMed

    Moraes, N; Moraes, E; Cunha Marques, H H

    1975-01-01

    Fifty-three patients were examined for dental abnormalities at an institution specializing in care of the mentally deficient in Bauru, São Paulo State. The incidence of teeth with abnormal morphology, mainly second molars with an abnormal number of cusps, was extremely high. Enamel hypoplasia was frequently found in anterior teeth, and the percentage of fractured maxillary incisors was significantly higher than that observed in normal individuals.

  16. Chronic Fluoride Toxicity: Dental Fluorosis

    PubMed Central

    DenBesten, Pamela; Li, Wu

    2012-01-01

    Dental fluorosis occurs as a result of excess fluoride ingestion during tooth formation. Enamel fluorosis and primary dentin fluorosis can only occur when teeth are forming, and therefore fluoride exposure (as it relates to dental fluorosis) occurs during childhood. In the permanent dentition, this would begin with the lower incisors, which complete mineralization at approximately 2–3 years of age, and end after mineralization of the third molars. The white opaque appearance of fluorosed enamel is caused by a hypomineralized enamel subsurface; with more severe dental fluorosis, pitting and a loss of the enamel surface occurs, leading to secondary staining (appearing as a brown color). Many of the changes caused by fluoride are related to cell/matrix/mineral interactions as the teeth are forming. At the early maturation stage, the relative quantity of amelogenin protein is increased in fluorosed enamel in a dose-related manner. This appears to result from a delay in the removal of amelogenins as the enamel matures. In vitro, when fluoride is incorporated into the mineral, more protein binds to the forming mineral, and protein removal by proteinases is delayed. This suggests that altered protein/mineral interactions are in part responsible for retention of amelogenins and the resultant hypomineralization that occurs in fluorosed enamel. Fluoride also appears to enhance mineral precipitation in forming teeth, resulting in hypermineralized bands of enamel, which are then followed by hypomineralized bands. Enhanced mineral precipitation with local increases in matrix acidity may affect maturation stage ameloblast modulation, potentially explaining the doserelated decrease in cycles of ameloblast modulation from ruffleended to smooth-ended cells that occur with fluoride exposure in rodents. Specific cellular effects of fluoride have been implicated, but more research is needed to determine which of these changes are relevant to the formation of fluorosed teeth. As

  17. Sports drinks and dental erosion.

    PubMed

    Noble, Warden H; Donovan, Terence E; Geissberger, Marc

    2011-04-01

    Sports drinks were originally developed to improve hydration and performance in athletes taking part in intense or endurance sporting events. These drinks contain relatively high amounts of carbohydrates (sugars), salt, and citric acid. These ingredients create the potential for dental ramifications and overall public health consequences such as obesity and diabetes. High intake of sports drinks during exercise, coupled with xerostomia from dehydration, may lead to the possibility of erosive damage to teeth.

  18. Tarnish of dental alloys by oral microorganisms.

    PubMed

    Vaidyanathan, T K; Vaidyanathan, J; Linke, H A; Schulman, A

    1991-11-01

    Five dental alloys, on exposure to blood and chocolate media with and without inoculated microorganisms, showed varying degrees of tarnish. The results indicated a composition-dependent tarnish behavior of alloys in microorganism-inoculated media, indicating a potential role for the oral microorganisms in inducing clinically observed tarnish of dental alloys. Actinomyces viscosus and periodontal pocket specimens show a similarity in their activity to induce tarnish in base metal-containing dental alloys.

  19. Predictability of Dental Emergencies by Panography.

    DTIC Science & Technology

    1981-09-30

    population (recruits with little or no prior dental care) demonstrate a high incidence of 1,2dental disease . Various epidemiologic studies have shown the...Medical Center, Washington, DC 20012 I Abstract: A study was undertaken to evaluate the effectiveness and reliability of panoramic radiography for...dental complaints ranked second only to upper respiratory infections. The purpose of this study was to evaluate the effectiveness and reliability of

  20. Contact dermatitis from beryllium in dental alloys.

    PubMed

    Haberman, A L; Pratt, M; Storrs, F J

    1993-03-01

    An increasing number of metals with the potential to cause allergic contact dermatitis have found their way into dental alloys for economic and practical reasons. 2 patients are reported who developed gingivitis adjacent to the Rexillium III alloy in their dental prostheses. Patch testing demonstrated positive reactions to beryllium sulfate, a component of the alloy. Components of dental alloys and the mechanism of the contact dermatitis are discussed.