Science.gov

Sample records for 3r multipurpose laboratory

  1. Novel multipurpose timer for laboratories

    NASA Technical Reports Server (NTRS)

    Eisler, W. J.; Klein, P. D.

    1969-01-01

    Multipurpose digital delay timer simultaneously controls both a buffer pump and a fraction-collector. Timing and control may be in 30-second increments for up to 15 hours. Use of glassware and scintillation vials make it economical.

  2. The Design of Multi-Purpose Science Laboratories for Lower Second Level Schools in Asia. Study No. 11.

    ERIC Educational Resources Information Center

    Soderberg, B. H.

    The small size of many schools in the Asian Region would cause separate laboratories for chemistry and biology to be underutilized. In many larger schools the curricula include "general science," with contents from biology, physics, and chemistry. This paper describes multipurpose spaces for science activities sufficient for science teaching and…

  3. Cultural Resource Investigations for a Multipurpose Haul Road on the Idaho National Laboratory

    SciTech Connect

    Brenda R. Pace; Cameron Brizzee; Hollie Gilbert; Clayton Marler; Julie Braun Williams

    2010-08-01

    The U. S. Department of Energy, Idaho Operations Office is considering options for construction of a multipurpose haul road to transport materials and wastes between the Materials and Fuels Complex (MFC) and other Idaho National Laboratory (INL) Site facilities. The proposed road will be closed to the public and designed for limited year-round use. Two primary options are under consideration: a new route south of the existing T-25 power line road and an upgrade to road T-24. In the Spring of 2010, archaeological field surveys and initial coordination and field reconnaissance with representatives from the Shoshone-Bannock Tribes were completed to identify any resources that may be adversely affected by the proposed road construction and to develop recommendations to protect any listed or eligible for listing on the National Register of Historic Places. The investigations showed that 24 archaeological resources and one historic marker are located in the area of potential effects for road construction and operation south of the T-25 powerline road and 27archaeological resources are located in the area of potential effects for road construction and operation along road T-24. Generalized tribal concerns regarding protection of natural resources were also documented in both road corridors. This report outlines recommendations for additional investigations and protective measures that can be implemented to minimize adverse impacts to the identified resources.

  4. Multipurpose Spaces.

    ERIC Educational Resources Information Center

    Butin, Dan

    This paper examines the emerging trend of multipurpose class spaces, including educational trends influencing multipurpose classroom use, and key issues when using these spaces. Issues discussed include room location, technology integration, food services, acoustics, lighting, outdoor space, capacity, and storage. Design principles emphasized…

  5. A High Intensity Multi-Purpose D-D Neutron Generator for Nuclear Engineering Laboratories

    SciTech Connect

    Ka-Ngo Leung; Jasmina L. Vujic; Edward C. Morse; Per F. Peterson

    2005-11-29

    This NEER project involves the design, construction and testing of a low-cost high intensity D-D neutron generator for teaching nuclear engineering students in a laboratory environment without radioisotopes or a nuclear reactor. The neutron generator was designed, fabricated and tested at Lawrence Berkeley National Laboratory (LBNL).

  6. Multipurpose Spaces

    ERIC Educational Resources Information Center

    Gordon, Douglas

    2010-01-01

    The concept of multipurpose spaces in schools is certainly not new. Especially in elementary schools, the combination of cafeteria and auditorium (and sometimes indoor physical activity space as well) is a well-established approach to maximizing the use of school space and a school district's budget. Nonetheless, there continue to be refinements…

  7. Novel laboratory approaches to multi-purpose aquatic bioregenerative closed-loop food production systems.

    PubMed

    Blum, V; Andriske, M; Kreuzberg, K; Paassen, U; Schreibman, M P; Voeste, D

    1998-01-01

    Based on the construction principle of the Closed Equilibrated Biological Aquatic System (C.E.B.A.S.) two novel combined animal-plant production systems were developed in laboratory scale the first of which is dedicated to mid-term operation in closed state up to two years. In principle both consist of the "classic" C.E.B.A.S. subcomponents: animal tank (Zoological Component), plant cultivators (Botanical Component), ammonia converting bacteria filter (Microbial Component) and data acquisition/control unit (Electronical Component). The innovative approach in the first system is the utilization of minimally three aquatic plant cultivators for different species. In this one the animal tank has a volume of about 160 liters and is constructed as an "endless-way system" surrounding a central unit containing the heat exchanger and the bacteria filter with volumes of about 1.5 liters each. A suspension plant cultivator (1 liter) for the edible duckweed Wolffia arrhiza is externally connected. The second plant cultivator is a meandric microalgal bioreactor for filamentous green algae. The third plant growth facility is a chamber with about 2.5 liters volume for cultivation of the "traditional" C.E.B.A.S. plant species, the rootless buoyant Ceratophyllum demersum. Both latter units are illuminated with 9 W fluorescent lamps. In the current experiment the animal tank contains the live-bearing teleost fish Xiphophorus helleri and the small pulmonate water snail Biomphalaria glabrata because their physiological adaptation to the closed system conditions is well known from many previous C.E.B.A.S. experiments. The water temperature is maintained at 25 degrees C and the oxygen level is regulated between 4 and 7 mg/l by switching on and off the plant cultivator illuminations according to a suitable pattern thus utilizing solely the oxygen produced by photosynthesis. The animals and the microorganisms of filter and biofilm provide the plants with a sufficient amount of carbon

  8. Novel laboratory approaches to multi-purpose aquatic bioregenerative closed-loop food production systems.

    PubMed

    Blum, V; Andriske, M; Kreuzberg, K; Paassen, U; Schreibman, M P; Voeste, D

    1998-01-01

    Based on the construction principle of the Closed Equilibrated Biological Aquatic System (C.E.B.A.S.) two novel combined animal-plant production systems were developed in laboratory scale the first of which is dedicated to mid-term operation in closed state up to two years. In principle both consist of the "classic" C.E.B.A.S. subcomponents: animal tank (Zoological Component), plant cultivators (Botanical Component), ammonia converting bacteria filter (Microbial Component) and data acquisition/control unit (Electronical Component). The innovative approach in the first system is the utilization of minimally three aquatic plant cultivators for different species. In this one the animal tank has a volume of about 160 liters and is constructed as an "endless-way system" surrounding a central unit containing the heat exchanger and the bacteria filter with volumes of about 1.5 liters each. A suspension plant cultivator (1 liter) for the edible duckweed Wolffia arrhiza is externally connected. The second plant cultivator is a meandric microalgal bioreactor for filamentous green algae. The third plant growth facility is a chamber with about 2.5 liters volume for cultivation of the "traditional" C.E.B.A.S. plant species, the rootless buoyant Ceratophyllum demersum. Both latter units are illuminated with 9 W fluorescent lamps. In the current experiment the animal tank contains the live-bearing teleost fish Xiphophorus helleri and the small pulmonate water snail Biomphalaria glabrata because their physiological adaptation to the closed system conditions is well known from many previous C.E.B.A.S. experiments. The water temperature is maintained at 25 degrees C and the oxygen level is regulated between 4 and 7 mg/l by switching on and off the plant cultivator illuminations according to a suitable pattern thus utilizing solely the oxygen produced by photosynthesis. The animals and the microorganisms of filter and biofilm provide the plants with a sufficient amount of carbon

  9. Novel laboratory approaches to multi-purpose aquatic bioregenerative closed-loop food production systems

    NASA Astrophysics Data System (ADS)

    Blüm, V.; Andriske, M.; Kreuzberg, K.; Paassen, U.; Schreibman, M. P.; Voeste, D.

    Based on the construction principle of the Closed Equilibrated Biological Aquatic System (C.E.B.A.S.) two novel combined animal-plant production systems were developed in laboratory scale the first of which is dedicated to mid-term operation in closed state up to two years. In principle both consist of the "classic" C.E.B.A.S. subcomponents: animal tank (Zoological Component), plant cultivators (Botanical Component), ammonia converting bacteria filter (Microbial Component) and data acquisition/control unit (Electronical Component). The innovative approach in the first system is the utilization of minimally three aquatic plant cultivators for different species. In this one the animal tank has a volume of about 160 liters and is constructed as an "endless-way system" surronding a central unit containing the heat exchanger and the bacteria filter with volumes of about 1.5 liters each. A suspension plant cultivator (1 liter) for the edible duckweed Wolffia arrhiza is externally connected. The second plant cultivator is a meandric microalgal bioreactor for filamentous green algae. The third plant growth facilitiy is a chamber with about 2.5 liters volume for cultivation of the "traditional" C.E.B.A.S. plant species, the rootless buoyant Ceratophyllum demersum. Both latter units are illuminated with 9 W fluorescent lamps. In the current experiment the animal tank contains the live-bearing teleost fish Xiphophorus helleri and the small pulmonate water snail Biomphalaria glabrata because their physiological adaptation to the closed system conditions is well known from many previous C.E.B.A.S. experiments. The water temperature is maintained at 25 °C and the oxygen level is regulated between 4 and 7 mg/1 by switching on and off the plant cultivator illuminations according to a suitable pattern thus utilizing solely the oxygen produced by photosynthesis. The animals and the micoorganisms of filter and bioflim provide the plants with a sufficient amount of carbon dioxide

  10. Setting up a Low-Cost Lab Management System for a Multi-Purpose Computing Laboratory Using Virtualisation Technology

    ERIC Educational Resources Information Center

    Mok, Heng Ngee; Lee, Yeow Leong; Tan, Wee Kiat

    2012-01-01

    This paper describes how a generic computer laboratory equipped with 52 workstations is set up for teaching IT-related courses and other general purpose usage. The authors have successfully constructed a lab management system based on decentralised, client-side software virtualisation technology using Linux and free software tools from VMware that…

  11. Multipurpose ROV system for underwater monitoring

    SciTech Connect

    Graczyk, T.

    1995-12-31

    The paper presents achievements of the Underwater Team at the Faculty of Maritime Technology of the Szczecin Technical University in the field of designing the equipment destined for the underwater monitoring. The multipurpose remotely operated vehicle system is described. Technical specification, some laboratory tank test results, research techniques, operational range, experience and development trends have been discussed.

  12. Multipurpose Cargo Transfer Bag

    NASA Technical Reports Server (NTRS)

    Broyan, James; Baccus, Shelley

    2014-01-01

    The Logistics Reduction (LR) project within the Advanced Exploration Systems (AES) program is tasked with reducing logistical mass and repurposing logistical items. Multipurpose Cargo Transfer Bags (MCTB) have been designed such that they can serve the same purpose as a Cargo Transfer Bag, the suitcase-shaped common logistics carrying bag for Shuttle and the International Space Station. After use as a cargo carrier, a regular CTB becomes trash, whereas the MCTB can be unzipped, unsnapped, and unfolded to be reused. Reuse ideas that have been investigated include partitions, crew quarters, solar radiation storm shelters, acoustic blankets, and forward osmosis water processing.

  13. Multipurpose Compact Spectrometric Unit

    SciTech Connect

    Bocarov, Viktor; Cermak, Pavel; Mamedov, Fadahat; Stekl, Ivan

    2009-11-09

    A new standalone compact spectrometer was developed. The device consists of analog (peamplifier, amplifier) and digital parts. The digital part is based on the 160 MIPS Digital Signal Processor. It contains 20 Msps Flash-ADC, 1 MB RAM for spectra storage, 128 KB Flash/ROM for firmware storage, Real Time Clock and several voltage regulators providing the power for user peripherals (e.g. amplifier, temperature sensors, etc.). Spectrometer is connected with a notebook via high-speed USB 2.0 bus. The spectrometer is multipurpose device, which is planned to be used for measurements of Rn activities, energy of detected particles by CdTe pixel detector or for coincidence measurements.

  14. Multipurpose Compact Spectrometric Unit

    NASA Astrophysics Data System (ADS)

    Bočarov, Viktor; Čermák, Pavel; Mamedov, Fadahat; Štekl, Ivan

    2009-11-01

    A new standalone compact spectrometer was developed. The device consists of analog (peamplifier, amplifier) and digital parts. The digital part is based on the 160 MIPS Digital Signal Processor. It contains 20 Msps Flash-ADC, 1 MB RAM for spectra storage, 128 KB Flash/ROM for firmware storage, Real Time Clock and several voltage regulators providing the power for user peripherals (e.g. amplifier, temperature sensors, etc.). Spectrometer is connected with a notebook via high-speed USB 2.0 bus. The spectrometer is multipurpose device, which is planned to be used for measurements of Rn activities, energy of detected particles by CdTe pixel detector or for coincidence measurements.

  15. Multipurpose satellite bus (MPS)

    NASA Technical Reports Server (NTRS)

    1991-01-01

    The Naval Postgraduate School Advanced Design Project sponsored by the Universities Space Research Association Advanced Design Program is a multipurpose satellite bus (MPS). The design was initiated from a Statement of Work (SOW) developed by the Defense Advanced Research Projects Agency (DARPA). The SOW called for a 'proposal to design a small, low-cost, lightweight, general purpose spacecraft bus capable of accommodating any of a variety of mission payloads. Typical payloads envisioned include those associated with meteorological, communication, surveillance and tracking, target location, and navigation mission areas.' The design project investigates two dissimilar missions, a meteorological payload and a communications payload, mated with a single spacecraft bus with minimal modifications. The MPS is designed for launch aboard the Pegasus Air Launched Vehicle (ALV) or the Taurus Standard Small Launch Vehicle (SSLV).

  16. Multipurpose hyperspectral imaging system

    Technology Transfer Automated Retrieval System (TEKTRAN)

    A hyperspectral imaging system of high spectral and spatial resolution that incorporates several innovative features has been developed to incorporate a focal plane scanner (U.S. Patent 6,166,373). This feature enables the system to be used for both airborne/spaceborne and laboratory hyperspectral i...

  17. Small multipurpose stored data acquisition system

    SciTech Connect

    Hauser, G.C.; Ryerson, D.E.

    1990-01-01

    Sandia National Laboratories Telemetry Department has designed and is fielding a small, inexpensive multipurpose stored data acquisition system in tests ranging from 6000 meters below the ocean surface in seafloor penetrators to 40,000 meters above sea level in gamma ray telescope balloons. The systems consists of a simple microprocessor-controlled unit which digitizes analog data stores the data in memory for readout after the test by a portable personal compute. The system has been used in over ninety tests consisting of parachute drops, water entry test, vehicle environmental monitoring, and seafloor penetration tests. Data typically recorded with the system are acceleration, strain, temperature, pressure, and angular velocity. The system is also capable of generating control functions such as parachute release. 5 refs., 6 figs.

  18. Multi-purpose neutron radiography system

    SciTech Connect

    Barton, J.P.; Bryant, L.E.; Berry, P.

    1996-07-01

    A conceptual design is given for a low cost, multipurpose radiography system suited for the needs of the Los Alamos National Laboratory (LANL). The proposed neutron source is californium-252. One purpose is to provide an in-house capability for occasional, reactor quality, neutron radiography thus replacing the recently closed Omega-West Reactor. A second purpose is to provide a highly reliable standby transportable neutron radiography system. A third purpose is to provide for transportable neutron probe gamma spectroscopy techniques. The cost is minimized by shared use of an existing x-ray facility, and by use of an existing transport cask. The achievable neutron radiography and radioscopy performance characteristics have been verified. The demonstrated image qualities range from high resolution gadolinium - SR film, with L:D = 100:1, to radioscopy using a LIXI image with L:D = 30:1 and neutron fluence 3.4 x 10{sup 5} n/cm{sup 2}.

  19. Multipurpose interactive NASA information system

    NASA Technical Reports Server (NTRS)

    Hill, J. M.; Keefer, R. L.; Sanders, D. R.; Seitz, R. N.

    1979-01-01

    Multipurpose Interactive NASA Information System (MINIS) is data management system capable of retrieving descriptive data from LANDSAT photos. General enough to be used with other user-defined data bases, interactive data management and information retrieval system was especially developed for small and medium-sized computers. It uses free-form data base that allows one to create entirely new and different data bases and to control format of output products.

  20. Multipurpose Hyperspectral Imaging System

    NASA Technical Reports Server (NTRS)

    Mao, Chengye; Smith, David; Lanoue, Mark A.; Poole, Gavin H.; Heitschmidt, Jerry; Martinez, Luis; Windham, William A.; Lawrence, Kurt C.; Park, Bosoon

    2005-01-01

    A hyperspectral imaging system of high spectral and spatial resolution that incorporates several innovative features has been developed to incorporate a focal plane scanner (U.S. Patent 6,166,373). This feature enables the system to be used for both airborne/spaceborne and laboratory hyperspectral imaging with or without relative movement of the imaging system, and it can be used to scan a target of any size as long as the target can be imaged at the focal plane; for example, automated inspection of food items and identification of single-celled organisms. The spectral resolution of this system is greater than that of prior terrestrial multispectral imaging systems. Moreover, unlike prior high-spectral resolution airborne and spaceborne hyperspectral imaging systems, this system does not rely on relative movement of the target and the imaging system to sweep an imaging line across a scene. This compact system (see figure) consists of a front objective mounted at a translation stage with a motorized actuator, and a line-slit imaging spectrograph mounted within a rotary assembly with a rear adaptor to a charged-coupled-device (CCD) camera. Push-broom scanning is carried out by the motorized actuator which can be controlled either manually by an operator or automatically by a computer to drive the line-slit across an image at a focal plane of the front objective. To reduce the cost, the system has been designed to integrate as many as possible off-the-shelf components including the CCD camera and spectrograph. The system has achieved high spectral and spatial resolutions by using a high-quality CCD camera, spectrograph, and front objective lens. Fixtures for attachment of the system to a microscope (U.S. Patent 6,495,818 B1) make it possible to acquire multispectral images of single cells and other microscopic objects.

  1. An inexpensive, multipurpose physical pendulum

    NASA Astrophysics Data System (ADS)

    Schultz, David

    2012-10-01

    The pendulum is a highly versatile tool for teaching physics. Many special purpose pendula for student experiments have been described.1-4 In this paper, I describe an inexpensive, multipurpose physical pendulum that can function as both a variable gravity and ballistic pendulum. I designed the apparatus for use in a rotational dynamics unit of the AP Physics C mechanics course. The use of a bike wheel hub pivot allows for low-friction, rugged operation that yields results commensurate with those obtained with much more expensive pendula available on the market (typically 500 per unit5), placing these types of experiments within reach of the teacher on a restricted budget.

  2. Multi-purpose satellite bus

    NASA Technical Reports Server (NTRS)

    Sakoda, Daniel; Agrawal, Brij N.

    1991-01-01

    The Multi-Purpose Satellite bus (MPS) can be used for a number of payloads which may require different orbits, pointing accuracy, and electrical power consumption. Specifically, it was designed to accommodate the Advanced Very High Resolution Radiometer and an EHF communication payload, both of which have a three-year life. The estimated beginning-of-life weight of the MPS bus is 150 kg. It can be launched by either the Pegasus ALV or the Taurus SSLV. Configuration requirements for the different missions are discussed.

  3. Multipurpose Vacuum Induction Processing System

    NASA Astrophysics Data System (ADS)

    Govindaraju, M.; Kulkarni, Deepak; Balasubramanian, K.

    2012-11-01

    Multipurpose vacuum processing systems are cost effective; occupy less space, multiple functional under one roof and user friendly. A multipurpose vacuum induction system was designed, fabricated and installed in a record time of 6 months time at NFTDC Hyderabad. It was designed to function as a) vacuum induction melting/refining of oxygen free electronic copper/pure metals, b) vacuum induction melting furnace for ferrous materials c) vacuum induction melting for non ferrous materials d) large vacuum heat treatment chamber by resistance heating (by detachable coil and hot zone) e) bottom discharge vacuum induction melting system for non ferrous materials f) Induction heat treatment system and g) directional solidification /investment casting. It contains provision for future capacity addition. The attachments require to manufacture multiple shaped castings and continuous rod casting can be added whenever need arises. Present capacity is decided on the requirement for 10years of development path; presently it has 1.2 ton liquid copper handling capacity. It is equipped with provision for capacity addition up to 2 ton liquid copper handling capacity in future. Provision is made to carry out the capacity addition in easy steps quickly. For easy operational maintenance and troubleshooting, design was made in easily detachable sections. High vacuum system is also is detachable, independent and easily movable which is first of its kind in the country. Detailed design parameters, advantages and development history are presented in this paper.

  4. CP3R: An Important Tool.

    PubMed

    Clark, Danette; Clark, Danillie

    2016-01-01

    The Web-based Cancer Program Practice Profile Reports (CP3R) offer providers comparative information to assess adherence to and consideration of standard-of-care therapies for major cancers. The tool helps facilities practice continuous improvement to ensure quality of patient care. The poster will illustrate a process to ensure the presentation of data at a compliance level. PMID:27556847

  5. CP3R: An Important Tool.

    PubMed

    Clark, Danette; Clark, Danillie

    2016-01-01

    The Web-based Cancer Program Practice Profile Reports (CP3R) offer providers comparative information to assess adherence to and consideration of standard-of-care therapies for major cancers. The tool helps facilities practice continuous improvement to ensure quality of patient care. The poster will illustrate a process to ensure the presentation of data at a compliance level.

  6. [Multipurpose treatment of vaginal infections].

    PubMed

    Nikolov, A; Masseva, A; Shopova, E; Georgiev, S

    2012-01-01

    Untreated bacterial vaginosis is related with many complications for non-pregnant women in reproductive age, most common from them are vaginal discharge and postoperative infections. The aim of our investigation was to compare the effectiveness of two therapeutic regimes which consist in Macmiror/Macmiror Complex alone and in combination with Feminella Vagi C for treatment of bacterial vaginosis (BV) and/or mycotic infection. 117 non-pregnant women with symptoms of vaginal infection were prospectively enrolled into two groups according their treatment. First group consist 66 women treated with Macmiror tablets and vaginal capsules followed with local application of Feminella Vagi C, the second group consist 54 women treated with Macmiror tablets and vaginal capsules only. The impact of treatment on clinical symptoms was observed at the end of medication and 20 days after it. Microbiological testing was repeated 20 days after treatment. Over than 80% (78.6 divided by 86.7%) of the cases with vaginal infection (BV and mycotic one) were successfully treated with Macmiror/Macmiror Complex. Supplement treatment with Feminella Vagi C lead to higher percentage of clinically recovery (86.7% vs 84.6%), better microbiological cleaning (86.7% vs 82.1%) and longer effect of treatment. Used medication showed higher efficacy against BV than to fungal infection. According obtained results we may conclude that bacterial vaginosis was better treated with multipurpose treatment (Nifuratel, Nistatin and vit. C) than with Macmiror alone. PMID:23234030

  7. The Astrophysical Multipurpose Software Environment

    NASA Astrophysics Data System (ADS)

    Pelupessy, F. I.; van Elteren, A.; de Vries, N.; McMillan, S. L. W.; Drost, N.; Portegies Zwart, S. F.

    2013-09-01

    We present the open source Astrophysical Multi-purpose Software Environment (AMUSE), a component library for performing astrophysical simulations involving different physical domains and scales. It couples existing codes within a Python framework based on a communication layer using MPI. The interfaces are standardized for each domain and their implementation based on MPI guarantees that the whole framework is well-suited for distributed computation. It includes facilities for unit handling and data storage. Currently it includes codes for gravitational dynamics, stellar evolution, hydrodynamics and radiative transfer. Within each domain the interfaces to the codes are as similar as possible. We describe the design and implementation of AMUSE, as well as the main components and community codes currently supported and we discuss the code interactions facilitated by the framework. Additionally, we demonstrate how AMUSE can be used to resolve complex astrophysical problems by presenting example applications. http://www.amusecode.org The current version of the code is available at the CDS via anonymous ftp to http://cdsarc.u-strasbg.fr (ftp://130.79.128.5) or via http://cdsarc.u-strasbg.fr/viz-bin/qcat?J/A+A/557/A84

  8. Multipurpose Communication Satellite solar array

    NASA Astrophysics Data System (ADS)

    Bastard, J. L.; Guyot, Ph.

    Through research and development studies, Aerospatiale has developed with the French National Space Agency (CNES) a new concept of a rigid Solar Array (GSR) which covers a range of power between 1 kW and 10 kW EOL 7 yr. This technology is used by Aerospatiale on the currently running programs:—TELECOM 1, Telecommunication satellite, spinned in transfer; —ARABSAT, Telecommunication satellite, 3-axis stabilized in transfer; —TELE-X and TV-SAT/TDF1, Direct Broadcasting satellites, 3-axis stabilized in transfer. This paper deals with the description and the electrical and mechanical performance of the Multipurpose Communication Satellite Solar Array (M.C.S.). For this satellite, which is expected to be launched in 1984, Aerospatiale has selected the following concept: primary power (1.4 kW EOL 7 yr) will be provided by two separate sun-oriented solar array wings equipped with AEG Telefunken BSR (Back Surface Reflector) solar cells. This solar generator is directly derived from the GSR technology. Owing to the three-axis stabilization of the satellite and the partial deployment of the solar array during the transfer phase it has been necessary to use a primary and a secondary hold-down devices. In the same way the position of the shunt on the solar generator induced an increase of the mass, because of the supplementary hold-down point and of the support structure. Now scribing Laser System leads to the optimization of the solar cells dimensions and allows a better fill factor of the panels and so an increase of the power performance. Beside the M.C.S concept which is fully adapted as regards its mission specifications, it was interesting to present different concepts of solar generators optimized not only as regards mass budget but also power budget. These concepts covering a large range of powers are fully adapted to telecommunication missions.

  9. Multipurpose top for liquid helium Dewar

    NASA Technical Reports Server (NTRS)

    Murphy, R. S.; Anderholm, J. R.

    1972-01-01

    Multipurpose top was fabricated for liquid helium Dewar flask which guards against flash vaporization of liquid helium and allows boiling temperature of liquid helium to be lowered by reduction of ambient pressure in Dewar flask. Device is rugged and simple, and does not require frequent calibrations or adjustments.

  10. How To Light a Multipurpose Facility.

    ERIC Educational Resources Information Center

    Ries, Jack

    1998-01-01

    Highlights the questions to ask when designing or retrofitting the lighting needs for a multipurpose campus facility. Issues addressed include the tasks the facility is expected to accommodate, the benefits of available lighting sources, the facility's layout and dimensions, aesthetics and functionality, and budgetary considerations. (GR)

  11. Engineered Serratia marcescens for efficient (3R)-acetoin and (2R,3R)-2,3-butanediol production.

    PubMed

    Bai, Fangmin; Dai, Lu; Fan, Jiying; Truong, Ngoctu; Rao, Ben; Zhang, Liaoyuan; Shen, Yaling

    2015-05-01

    (3R)-Acetoin and (2R,3R)-2,3-butanediol are important pharmaceutical intermediates. However, until now, the quantity of natural microorganisms with the ability to produce single configuration of optically pure (3R)-acetoin and (2R,3R)-2,3-butanediol is rare. In this study, a meso-2,3-butanediol dehydrogenase encoded by the slaC gene from Serratia marcescens MG1 was identified for meso-2,3-butanediol and (2S,3S)-2,3-butanediol biosynthesis. Inactivation of the slaC gene could significantly decrease meso-2,3-butanediol and (2S,3S)-2,3-butanediol and result in a large quantity of (3R)-acetoin accumulation. Furthermore, a (2R,3R)-2,3-butanediol dehydrogenase encoded by the bdhA gene from Bacillus subtilis 168 was introduced into the slaC mutant strain of Serratia marcescens MG1. Excess (2R,3R)-2,3-butanediol dehydrogenase could accelerate the reaction from (3R)-acetoin to (2R,3R)-2,3-butanediol and lead to (2R,3R)-2,3-butanediol accumulation. In fed-batch fermentation, the excess (2R,3R)-2,3-butanediol dehydrogenase expression strain could produce 89.81 g/l (2R,3R)-2,3-butanediol with a productivity of 1.91 g/l/h at 48 h. These results provided potential applications for (3R)-acetoin and (2R,3R)-2,3-butanediol production.

  12. Development of a multipurpose smart recorder for general aviation aircraft

    NASA Technical Reports Server (NTRS)

    White, J. H.; Finger, J. F.

    1988-01-01

    An intelligent flight recorder, called the Smart Recorder, was fabricated and installed on a King Air aircraft used in standard commercial charter service. This recorder was used for collection of data toward two objectives: (1) the characterization of the typical environment encountered by the aircraft; and (2) research in the area of trend monitoring. Data processing routines and data presentation formats were defined that are applicable to commuter size aircraft. The feasibility of a cost-effective, multipurpose recorder for general aviation aircraft was successfully demonstrated. Implementation of on-board environmental data processing increased the number of flight hours that could be stored on a single data cartridge and simplified the data management problem by reducing the volume of data to be processed in the laboratory. Trend monitoring algorithms showed less variability in the trend plots when compared against plots of manual data.

  13. The 3R polymorph of CaSi{sub 2}

    SciTech Connect

    Nedumkandathil, Reji; Benson, Daryn E.; Grins, Jekabs; Spektor, Kristina; Häussermann, Ulrich

    2015-02-15

    The Zintl phase CaSi{sub 2} commonly occurs in the 6R structure where puckered hexagon layers of Si atoms are stacked in an AA′BB′CC′ fashion. In this study we show that sintering of CaSi{sub 2} in a hydrogen atmosphere (30 bar) at temperatures between 200 and 700 °C transforms 6R-CaSi{sub 2} quantitatively into 3R-CaSi{sub 2}. In the 3R polymorph (space group R-3m (no. 166), a=3.8284(1), c=15.8966(4), Z=3) puckered hexagon layers are stacked in an ABC fashion. The volume per formula unit is about 3% larger compared to 6R-CaSi{sub 2}. First principles density functional calculations reveal that 6R and 3R-CaSi{sub 2} are energetically degenerate at zero Kelvin. With increasing temperature 6R-CaSi{sub 2} stabilizes over 3R because of its higher entropy. This suggests that 3R-CaSi{sub 2} should revert to 6R at elevated temperatures, which however is not observed up to 800 °C. 3R-CaSi{sub 2} may be stabilized by small amounts of incorporated hydrogen and/or defects. - Graphical abstract: The common 6R form of CaSi{sub 2} can be transformed quantitatively into 3R-CaSi{sub 2} upon sintering in a hydrogen atmosphere. - Highlights: • Quantitative and reproducible bulk synthesis of the rare 3R polymorph of CaSi{sub 2}. • Clarification of the energetic relation between 3R and conventional 6R form. • 3R-CaSi{sub 2} is presumably stabilized by small amounts of incorporated hydrogen and/or defects.

  14. Go3R - semantic Internet search engine for alternative methods to animal testing.

    PubMed

    Sauer, Ursula G; Wächter, Thomas; Grune, Barbara; Doms, Andreas; Alvers, Michael R; Spielmann, Horst; Schroeder, Michael

    2009-01-01

    Consideration and incorporation of all available scientific information is an important part of the planning of any scientific project. As regards research with sentient animals, EU Directive 86/609/EEC for the protection of laboratory animals requires scientists to consider whether any planned animal experiment can be substituted by other scientifically satisfactory methods not entailing the use of animals or entailing less animals or less animal suffering, before performing the experiment. Thus, collection of relevant information is indispensable in order to meet this legal obligation. However, no standard procedures or services exist to provide convenient access to the information required to reliably determine whether it is possible to replace, reduce or refine a planned animal experiment in accordance with the 3Rs principle. The search engine Go3R, which is available free of charge under http://Go3R.org, runs up to become such a standard service. Go3R is the world-wide first search engine on alternative methods building on new semantic technologies that use an expert-knowledge based ontology to identify relevant documents. Due to Go3R's concept and design, the search engine can be used without lengthy instructions. It enables all those involved in the planning, authorisation and performance of animal experiments to determine the availability of non-animal methodologies in a fast, comprehensive and transparent manner. Thereby, Go3R strives to significantly contribute to the avoidance and replacement of animal experiments.

  15. Multipurpose Interactive NASA Information Systems (MINIS)

    NASA Technical Reports Server (NTRS)

    1977-01-01

    The Multipurpose Interactive NASA Information System was developed to provide remote, interactive information retrieval capability for various types of data bases to be processed on different types of small and medium size computers. Use of the system for three different data bases is decribed: (1) LANDSAT photo look-up, (2) land use, and (3) census/socioeconomic. Each of the data base elements is shown together with other detailed information that a user would require to contact the system remotely, to transmit inquiries on commands, and to receive the results of the queries or commands.

  16. A MULTIPURPOSE COHERENT INSTABILITY SIMULATION CODE

    SciTech Connect

    BLASKIEWICZ,M.

    2007-06-25

    A multipurpose coherent instability simulation code has been written, documented, and released for use. TRANFT (tran-eff-tee) uses fast Fourier transforms to model transverse wakefields, transverse detuning wakes and longitudinal wakefields in a computationally efficient way. Dual harmonic RF allows for the study of enhanced synchrotron frequency spread. When coupled with chromaticity, the theoretically challenging but highly practical post head-tail regime is open to study. Detuning wakes allow for transverse space charge forces in low energy hadron beams, and a switch allowing for radiation damping makes the code useful for electrons.

  17. 21 CFR 866.2300 - Multipurpose culture medium.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Multipurpose culture medium. 866.2300 Section 866.2300 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED... medium. (a) Identification. A multipurpose culture medium is a device that consists primarily of...

  18. 21 CFR 866.2300 - Multipurpose culture medium.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Multipurpose culture medium. 866.2300 Section 866.2300 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED... medium. (a) Identification. A multipurpose culture medium is a device that consists primarily of...

  19. 21 CFR 866.2300 - Multipurpose culture medium.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Multipurpose culture medium. 866.2300 Section 866.2300 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED... medium. (a) Identification. A multipurpose culture medium is a device that consists primarily of...

  20. 21 CFR 866.2300 - Multipurpose culture medium.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Multipurpose culture medium. 866.2300 Section 866.2300 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED... medium. (a) Identification. A multipurpose culture medium is a device that consists primarily of...

  1. 21 CFR 866.2300 - Multipurpose culture medium.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Multipurpose culture medium. 866.2300 Section 866.2300 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED... medium. (a) Identification. A multipurpose culture medium is a device that consists primarily of...

  2. The RC Circuit--A Multipurpose Laboratory Experiment.

    ERIC Educational Resources Information Center

    Wood, Herbert T.

    1993-01-01

    Describes an experiment that demonstrates the use of Kirchoff's rules in the analysis of electrical circuits. The experiment also involves the solution of a linear nonhomogeneous differential equation that is slightly different from the standard one for the simple RC circuit. (ZWH)

  3. The Economic Benefits Of Multipurpose Reservoirs In The United States- Federal Hydropower Fleet

    SciTech Connect

    Hadjerioua, Boualem; Witt, Adam M.; Stewart, Kevin M.; Bonnet Acosta, Marisol; Mobley, Miles

    2015-09-01

    The United States is home to over 80,000 dams, of which approximately 3% are equipped with hydroelectric generating capabilities. When a dam serves as a hydropower facility, it provides a variety of energy services that range from clean, reliable power generation to load balancing that supports grid stability. In most cases, the benefits of dams and their associated reservoirs go far beyond supporting the nation s energy demand. As evidenced by the substantial presence of non-powered dams with the ability to store water in large capacities, the primary purpose of a dam may not be hydropower, but rather one of many other purposes. A dam and reservoir may support navigation, recreation, flood control, irrigation, and water supply, with each multipurpose benefit providing significant social and economic impacts on a local, regional, and national level. When hydropower is one of the services provided by a multipurpose reservoir, it is then part of an integrated system of competing uses. Operating rules, management practices, consumer demands, and environmental constraints must all be balanced to meet the multipurpose project s objectives. When federal dams are built, they are authorized by Congress to serve one or more functions. Legislation such as the Water Resources Development Act regulates the operation of the facility in order to coordinate the authorized uses and ensure the dam s intended objectives are being met. While multipurpose reservoirs account for billions of dollars in contributions to National Economic Development (NED) every year, no attempt has been made to evaluate their benefits on a national scale. This study is an on-going work conducted by Oak Ridge National Laboratory in an effort to estimate the economic benefits of multipurpose hydropower reservoirs in the United States. Given the important role that federal hydropower plays in the U.S., the first focus of this research will target the three main federal hydropower owners Tennessee Valley

  4. Multipurpose Acoustic Sensor for Downhole Fluid Monitoring

    SciTech Connect

    Pantea, Cristian

    2012-05-04

    The projects objectives and purpose are to: (1) development a multipurpose acoustic sensor for downhole fluid monitoring in Enhanced Geothermal Systems (EGS) reservoirs over typical ranges of pressures and temperatures and demonstrate its capabilities and performance for different EGS systems; (2) determine in real-time and in a single sensor package several parameters - temperature, pressure, fluid flow and fluid properties; (3) needed in nearly every phase of an EGS project, including Testing of Injection and Production Wells, Reservoir Validation, Inter-well Connectivity, Reservoir Scale Up and Reservoir Sustainability. (4) Current sensors are limited to operating at lower temperatures, but the need is for logging at high temperatures. The present project deals with the development of a novel acoustic-based sensor that can work at temperatures up to 374 C, in inhospitable environments.

  5. Electronic multi-purpose material level sensor

    DOEpatents

    McEwan, T.E.

    1997-03-11

    The present electronic multi-purpose material level sensor is based on time domain reflectometry (TDR) of very short electrical pulses. Pulses are propagated along a transmission line that is partially immersed in a liquid, powder, or other substance such as grain in a silo. The time difference of the reflections at the start of the transmission line and the air/liquid interface are used to determine levels to better than 0.01 inch. The sensor is essentially independent of circuit element and temperature variations, and can be mass produced at an extremely low price. The transmission line may be a Goubau line, microstrip, coaxial cable, twin lead, CPS or CPW, and may typically be a strip placed along the inside wall of a tank. The reflected pulses also contain information about strata within the liquid such as sludge-build-up at the bottom of an oil tank. 9 figs.

  6. Electronic multi-purpose material level sensor

    DOEpatents

    McEwan, Thomas E.

    1997-01-01

    The present electronic multi-purpose material level sensor is based on time domain reflectometry (TDR) of very short electrical pulses. Pulses are propagated along a transmission line that is partially immersed in a liquid, powder, or other substance such as grain in a silo. The time difference of the reflections at the start of the transmission line and the air/liquid interface are used to determine levels to better than 0.01 inch. The sensor is essentially independent of circuit element and temperature variations, and can be mass produced at an extremely low price. The transmission line may be a Goubau line, microstrip, coaxial cable, twin lead, CPS or CPW, and may typically be a strip placed along the inside wall of a tank. The reflected pulses also contain information about strata within the liquid such as sludge-build-up at the bottom of an oil tank.

  7. MINIS: Multipurpose Interactive NASA Information System

    NASA Technical Reports Server (NTRS)

    1976-01-01

    The Multipurpose Interactive NASA Information Systems (MINIS) was developed in response to the need for a data management system capable of operation on several different minicomputer systems. The desired system had to be capable of performing the functions of a LANDSAT photo descriptive data retrieval system while remaining general in terms of other acceptable user definable data bases. The system also had to be capable of performing data base updates and providing user-formatted output reports. The resultant MINI System provides all of these capabilities and several other features to complement the data management system. The MINI System is currently implemented on two minicomputer systems and is in the process of being installed on another minicomputer system. The MINIS is operational on four different data bases.

  8. MYRRHA: A multipurpose nuclear research facility

    NASA Astrophysics Data System (ADS)

    Baeten, P.; Schyns, M.; Fernandez, Rafaël; De Bruyn, Didier; Van den Eynde, Gert

    2014-12-01

    MYRRHA (Multi-purpose hYbrid Research Reactor for High-tech Applications) is a multipurpose research facility currently being developed at SCK•CEN. MYRRHA is based on the ADS (Accelerator Driven System) concept where a proton accelerator, a spallation target and a subcritical reactor are coupled. MYRRHA will demonstrate the ADS full concept by coupling these three components at a reasonable power level to allow operation feedback. As a flexible irradiation facility, the MYRRHA research facility will be able to work in both critical as subcritical modes. In this way, MYRRHA will allow fuel developments for innovative reactor systems, material developments for GEN IV and fusion reactors, and radioisotope production for medical and industrial applications. MYRRHA will be cooled by lead-bismuth eutectic and will play an important role in the development of the Pb-alloys technology needed for the LFR (Lead Fast Reactor) GEN IV concept. MYRRHA will also contribute to the study of partitioning and transmutation of high-level waste. Transmutation of minor actinides (MA) can be completed in an efficient way in fast neutron spectrum facilities, so both critical reactors and subcritical ADS are potential candidates as dedicated transmutation systems. However critical reactors heavily loaded with fuel containing large amounts of MA pose reactivity control problems, and thus safety problems. A subcritical ADS operates in a flexible and safe manner, even with a core loading containing a high amount of MA leading to a high transmutation rate. In this paper, the most recent developments in the design of the MYRRHA facility are presented.

  9. Coupling Algorithm for Sp (3 , R) Irreducible Representations

    NASA Astrophysics Data System (ADS)

    St Germaine-Fuller, James; McCoy, Anna; Caprio, Mark

    2014-09-01

    The nuclear symplectic model based on Sp (3 , R) - the smallest algebra that contains both the shell model Hamiltonian and the rotor algebra - connects the microscopic shell model to collective rotational behavior and naturally extends the Elliot SU (3) model to multiple shells. However, Sp (3 , R) is only an approximate symmetry of the nucleus, where the symmetry can be broken by spin-orbit interactions, tensor force interactions, and pairing. The Hamiltonians in most physical situations will the break Sp (3 , R) symmetry, causing their eigenstates to become linear combinations of symplectic irreducible representations (irreps). Calculations with those eigenstates will then involve multiple irreps. We report a computer algorithm for coupling symplectic irreps that should assist in performing such multi-irrep calculations and facilitate computing symplectic coupling coefficients. The nuclear symplectic model based on Sp (3 , R) - the smallest algebra that contains both the shell model Hamiltonian and the rotor algebra - connects the microscopic shell model to collective rotational behavior and naturally extends the Elliot SU (3) model to multiple shells. However, Sp (3 , R) is only an approximate symmetry of the nucleus, where the symmetry can be broken by spin-orbit interactions, tensor force interactions, and pairing. The Hamiltonians in most physical situations will the break Sp (3 , R) symmetry, causing their eigenstates to become linear combinations of symplectic irreducible representations (irreps). Calculations with those eigenstates will then involve multiple irreps. We report a computer algorithm for coupling symplectic irreps that should assist in performing such multi-irrep calculations and facilitate computing symplectic coupling coefficients. Supported by the US NSF under Grant NSF-PHY05-52843, the US DOE under Grant DE-FG02-95ER-40934, and the Research Corporation for Science Advancement under a Cottrell Scholar Award.

  10. Multi-purpose hydrogen isotopes separation plant design

    SciTech Connect

    Boniface, H.A.; Gnanapragasam, N.V.; Ryland, D.K.; Suppiah, S.; Castillo, I.

    2015-03-15

    There is a potential interest at AECL's Chalk River Laboratories to remove tritium from moderately tritiated light water and to reclaim tritiated, downgraded heavy water. With only a few limitations, a single CECE (Combined Electrolysis and Catalytic Exchange) process configuration can be designed to remove tritium from heavy water or light water and upgrade heavy water. Such a design would have some restrictions on the nature of the feed-stock and tritium product, but could produce essentially tritium-free light or heavy water that is chemically pure. The extracted tritium is produced as a small quantity of tritiated heavy water. The overall plant capacity is fixed by the total amount of electrolysis and volume of catalyst. In this proposal, with 60 kA of electrolysis a throughput of 15 kg*h{sup -1} light water for detritiation, about 4 kg*h{sup -1} of heavy water for detritiation and about 27 kg*h{sup -1} of 98% heavy water for upgrading can be processed. Such a plant requires about 1,000 liters of AECL isotope exchange catalyst. The general design features and details of this multi-purpose CECE process are described in this paper, based on some practical choices of design criteria. In addition, we outline the small differences that must be accommodated and some compromises that must be made to make the plant capable of such flexible operation. (authors)

  11. Multipurpose Logistics Module, Leonardo, Rests in Discovery's Payload Bay

    NASA Technical Reports Server (NTRS)

    2001-01-01

    This in-orbit close up shows the Italian Space Agency-built multipurpose Logistics Module (MPLM), Leonardo, the primary cargo of the STS-102 mission, resting in the payload bay of the Space Shuttle Orbiter Discovery. The Leonardo MPLM is the first of three such pressurized modules that will serve as the International Space Station's (ISS') moving vans, carrying laboratory racks filled with equipment, experiments, and supplies to and from the Station aboard the Space Shuttle. The cylindrical module is approximately 21-feet long and 15- feet in diameter, weighing almost 4.5 tons. It can carry up to 10 tons of cargo in 16 standard Space Station equipment racks. Of the 16 racks the module can carry, 5 can be furnished with power, data, and fluid to support refrigerators or freezers. In order to function as an attached station module as well as a cargo transport, the logistics module also includes components that provide life support, fire detection and suppression, electrical distribution, and computer functions. The eighth station assembly flight and NASA's 103rd overall flight, STS-102 launched March 8, 2001 for an almost 13 day mission.

  12. STS-102 Onboard Photograph Inside Multipurpose Logistics Module, Leonardo

    NASA Technical Reports Server (NTRS)

    2001-01-01

    Pilot James M. Kelly (left) and Commander James D. Wetherbee for the STS-102 mission, participate in the movement of supplies inside Leonardo, the Italian Space Agency built Multipurpose Logistics Module (MPLM). In this particular photograph, the two are handling a film magazine for the IMAX cargo bay camera. The primary cargo of the STS-102 mission, the Leonardo MPLM is the first of three such pressurized modules that will serve as the International Space Station's (ISS') moving vans, carrying laboratory racks filled with equipment, experiments, and supplies to and from the Station aboard the Space Shuttle. The cylindrical module is approximately 21-feet long and 15- feet in diameter, weighing almost 4.5 tons. It can carry up to 10 tons of cargo in 16 standard Space Station equipment racks. Of the 16 racks the module can carry, 5 can be furnished with power, data, and fluid to support refrigerators or freezers. In order to function as an attached station module as well as a cargo transport, the logistics module also includes components that provide life support, fire detection and suppression, electrical distribution, and computer functions. The eighth station assembly flight, the STS-102 mission also served as a crew rotation flight. It delivered the Expedition Two crew to the Station and returned the Expedition One crew back to Earth.

  13. 48. Second floor, looking southwest (possibly former multipurpose room) with ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    48. Second floor, looking southwest (possibly former multi-purpose room) with fire stair in center - Sheffield Farms Milk Plant, 1075 Webster Avenue (southwest corner of 166th Street), Bronx, Bronx County, NY

  14. QPSK 3R regenerator using a phase sensitive amplifier.

    PubMed

    Perentos, A; Fabbri, S; Sorokina, M; Phillips, I D; Turitsyn, S K; Ellis, A D; Sygletos, S

    2016-07-25

    A black box phase sensitive amplifier based 3R regeneration scheme is proposed for non-return to zero quadrature phase shift keyed formatted signals. Performance improvements of more than 2 dB are achieved at the presence of input phase distortion.

  15. Multipurpose simulation systems for regional development forecasting

    SciTech Connect

    Kostina, N.I.

    1995-09-01

    We examine the development of automaton-modeling multipurpose simulation systems as an efficient form of simulation software for MIS. Such systems constitute a single problem-oriented package of applications based on a general simulation model, which is equipped with a task source language, interaction tools, file management tools, and an output document editor. The simulation models are described by the method of probabilistic-automaton modeling, which ensures standard representation of models and standardization of the modeling algorithm. Examples of such systems include the demographic forecasting system DEPROG, the VOKON system for assessing the quality of consumer services in terms of free time, and the SONET system for servicing partially accessible customers. The development of computer-aided systems for production and economic control is now moving to the second state, namely operationalization of optimization and forecasting problems, whose solution may account for the main economic effect of MIS. Computation and information problems, which were the main focus of the first stage of MIS development, are thus acquiring the role of a source of information for optimization and forecasting problems in addition to their direct contribution to preparation and analysis of current production and economic information.

  16. Coupling Algorithm for Sp(3 , R) Irreducible Representations

    NASA Astrophysics Data System (ADS)

    St. Germaine-Fuller, James F.; McCoy, Anna E.; Caprio, Mark A.

    2015-04-01

    The nuclear symplectic model based on Sp(3 , R) - the smallest algebra that contains both the shell model Hamiltonian and the rotor algebra - connects the microscopic shell model to collective rotational behavior and naturally extends the Elliot SU(3) model to multiple shells. However, Sp(3 , R) is only an approximate symmetry of the nucleus which can be broken by spin-orbit interactions, tensor force interactions, and pairing. The Hamiltonians in most physical situations will break Sp(3 , R) symmetry, causing their eigenstates to become linear combinations of symplectic irreducible representations (irreps). Calculations with those eigenstates will then involve multiple irreps. We report a computer algorithm for enumerating the irreps that arise from the coupling of two symplectice irreps and evaluating their multiplicities in the product. This should assist in performing such multi-irrep calculations and facilitate computing symplectic coupling coefficients. Supported by the US NSF under Grant NSF-PHY05-52843, the US DOE under Grant DE-FG02-95ER-40934, and the Research Corporation for Science Advancement under a Cottrell Scholar Award.

  17. Solar powered multipurpose remotely powered aircraft

    NASA Technical Reports Server (NTRS)

    1991-01-01

    Environmental problems such as the depletion of the ozone layer and air pollution demand a change in traditional means of propulsion that is sensitive to the ecology. Solar-powered propulsion is a favorable alternative that is both ecologically harmless as well as cost effective. Integration of solar energy into designs ranging from futuristic vehicles to heating is, therefore, beneficial to society. The design and construction of a Multipurpose Remotely Piloted Vehicle (MPRPV) seeks to verify the feasibility of using solar propulsion as a primary fuel source. This task has been a year-long effort by a group of eight students, divided into four teams, each dealing with different aspects of the design. The aircraft was designed to take off, climb to the design altitude, fly in a sustained figure-eight flight path, and cruise for approximately one hour. This mission requires flight at Reynolds numbers between 150,000 and 200,000 and demands special considerations in the aerodynamic design to achieve flight in this regime. Optimal performance requires a lightweight configuration with both structural integrity and maximum power availability. The structural design and choice of solar cells for the propulsion were governed by weight, efficiency, and cost considerations. The final design is an MPRPV weighing 35 N that cruises at 7 m/s at the design altitude of 50 m. The configuration includes a wing composed of balsa and foam NACA 6409 airfoil sections and carbon fiber spars, a tail of similar construction, and a truss structure fuselage. The propulsion system consists of 98 12.5 percent-efficient solar cells donated by Mobil Solar, a NiCad battery for energy storage, and a folding propeller regulated by a lightweight and efficient control system. The airfoils and propeller chosen for the design were researched and tested during the design process.

  18. New generation of radiacs: small computerized multipurpose radiation monitors

    SciTech Connect

    Umbarger, C.J.; Bjarke, G.O.; Erkkila, B.H.; Trujillo, F.; Waechter, D.A.; Wolf, M.A.

    1982-01-01

    The Health Division at Los Alamos has developed a multipurpose radiation monitoring device that is computer-controlled, light weight (3 lb), includes multiple radiation detectors running simultaneously, and is simple to use. This multipurpose radiac is generic in nature and can use any of the standard radiation detectors such as NaI, /sup 3/He, LET proportional gas counters, solid state surface barrier detectors, etc. LCD displays indicate the various radiation parameters in both alphanumeric and graphics format. Internal batteries allow 100 hours of use.

  19. Antibody-based concepts for multipurpose prevention technologies

    PubMed Central

    Whaley, Kevin J; Zeitlin, Larry

    2014-01-01

    Because of the versatility and specificity of monoclonal antibodies, they are candidates for multipurpose prevention technologies when formulated as topical (gels, films, rings) or injectable drugs and as vaccines. This review focuses on antibody-based proof of concept studies for the human immunodeficiency virus, herpes simplex virus and sperm. Opportunities and challenges in antibody evasion/resistance, manufacturing, regulatory, and pharmacoeconomics are discussed. This article is based on a presentation at the “Product Development Workshop 2013: HIV and Multipurpose Prevention Technologies,” held in Arlington, Virginia on February 21-22, 2013. It forms part of a special supplement to Antiviral Research. PMID:24188703

  20. 21 CFR 864.5425 - Multipurpose system for in vitro coagulation studies.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Multipurpose system for in vitro coagulation... Hematology Devices § 864.5425 Multipurpose system for in vitro coagulation studies. (a) Identification. A multipurpose system for in vitro coagulation studies is a device consisting of one automated or...

  1. 21 CFR 864.5425 - Multipurpose system for in vitro coagulation studies.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Multipurpose system for in vitro coagulation... Hematology Devices § 864.5425 Multipurpose system for in vitro coagulation studies. (a) Identification. A multipurpose system for in vitro coagulation studies is a device consisting of one automated or...

  2. 21 CFR 864.5425 - Multipurpose system for in vitro coagulation studies.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Multipurpose system for in vitro coagulation... Hematology Devices § 864.5425 Multipurpose system for in vitro coagulation studies. (a) Identification. A multipurpose system for in vitro coagulation studies is a device consisting of one automated or...

  3. 21 CFR 864.5425 - Multipurpose system for in vitro coagulation studies.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Multipurpose system for in vitro coagulation... Hematology Devices § 864.5425 Multipurpose system for in vitro coagulation studies. (a) Identification. A multipurpose system for in vitro coagulation studies is a device consisting of one automated or...

  4. 21 CFR 864.5425 - Multipurpose system for in vitro coagulation studies.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Multipurpose system for in vitro coagulation... Hematology Devices § 864.5425 Multipurpose system for in vitro coagulation studies. (a) Identification. A multipurpose system for in vitro coagulation studies is a device consisting of one automated or...

  5. CARM1 Preferentially Methylates H3R17 over H3R26 through a Random Kinetic Mechanism.

    PubMed

    Jacques, Suzanne L; Aquino, Katrina P; Gureasko, Jodi; Boriack-Sjodin, P Ann; Porter Scott, Margaret; Copeland, Robert A; Riera, Thomas V

    2016-03-22

    CARM1 is a type I arginine methyltransferase involved in the regulation of transcription, pre-mRNA splicing, cell cycle progression, and the DNA damage response. CARM1 overexpression has been implicated in breast, prostate, and liver cancers and therefore is an attractive target for cancer therapy. To date, little about the kinetic properties of CARM1 is known. In this study, substrate specificity and the kinetic mechanism of the human enzyme were determined. Substrate specificity was examined by testing CARM1 activity with several histone H3-based peptides in a radiometric assay. Comparison of kcat/KM values reveals that methylation of H3R17 is preferred over that of H3R26. These effects are KM-driven as kcat values remain relatively constant for the peptides tested. Shortening the peptide at the C-terminus by five amino acid residues greatly reduced binding affinity, indicating distal residues may contribute to substrate binding. CARM1 appears to bind monomethylated peptides with an affinity similar to that of unmethylated peptides. Monitoring of the CARM1-dependent production of monomethylated and dimethylated peptides over time by self-assembled monolayer and matrix-assisted laser desorption ionization mass spectrometry revealed that methylation by CARM1 is distributive. Additionally, dead-end and product inhibition studies suggest CARM1 conforms to a random sequential kinetic mechanism. By defining the kinetic properties and mechanism of CARM1, these studies may aid in the development of small molecule CARM1 inhibitors. PMID:26848779

  6. Garrett Multipurpose Small Power Unit (MPSPU) - Program status 1989

    NASA Astrophysics Data System (ADS)

    Kidwell, J. R.

    1989-09-01

    The Multipurpose Small Power Unit (MPSPU) Advanced Development Program is structured to provide advanced technology for current and future U.S. Army or other DOD auxiliary power unit/secondary power systems applications. Development has proceeded through initial design, component development and initial power unit development.

  7. OCRWM Bulletin: Westinghouse begins designing multi-purpose canister

    SciTech Connect

    1995-09-01

    This publication consists of two parts: OCRWM (Office of Civilian Radioactive Waste Management) Bulletin; and Of Mountains & Science which has articles on the Yucca Mountain project. The OCRWM provides information about OCRWM activities and in this issue has articles on multi-purpose canister design, and transportation cask trailer.

  8. Multi-Purpose Tests: A Solution to Test Proliferation.

    ERIC Educational Resources Information Center

    Holmes, Susan E.

    This research, conducted for California State Department of Education, is one component of a feasibility study focusing on ways to make the testing process more efficient by application of multi-purpose tests (MPT). MPT are designed, administered and scored to serve more than one purpose and to consolidate and unify testing programs as a partial…

  9. Evaluation of the gait performance of above-knee amputees while walking with 3R20 and 3R15 knee joints

    PubMed Central

    Taheri, AliReza; Karimi, Mohammad Taghi

    2012-01-01

    Background: The performance of the subjects with above-knee amputation is noticeably poorer than normal subjects. Various types of components have been designed to compensate their performance. Among various prosthetic components, the knee joint has great influence on the function. Two types of knee joints (3R15, 3R20) have been used broadly for above-knee prostheses. However, there is not enough research to highlight the influence of these joints on the gait performance of the subjects. Therefore, an aim of this research was to investigate the performance of the above-knee amputees while walking with 3R15 and 3R20 knee joints. Materials and Methods: 7 above-knee amputees were recruited in this research study. They were asked to walk with a comfortable speed to investigate the gait function of the subjects with 3 cameras 3D motion analysis system (Kinematrix system). The difference between the performances of the subjects with these joints was compared by use of paired t-test. Results: The results of this study showed that, the performances of the subjects with 3R20 were better than that with 3R15. The walking speed of the subjects with 3R20 was 66.7 m/min compared to 30.4 m/min (P-value = 0.045). Moreover; the symmetry of walking with 3R20 was more than that with 3R15, based on the spatio- temporal gait parameters values (P-value <0.05). Conclusion: The difference between the performances of the subjects with 3R20 and 3R15 knee joints was related to the walking speed, which improved while walking with 3R20 joint. PMID:23267378

  10. rhCSF3 accelerates the proliferation of human melanocytes in culture through binding CSF3R and the expression of CSF3R transcripts.

    PubMed

    Lu, Yan; Guo, Ze; Zhou, Mei-Hua; Li, Xue; Sun, Jie; Gong, Qing-Li; Zhu, Wen-Yuan

    2015-05-01

    Melanogenic paracrine and autocrine cytokine networks have recently been discovered in vitro between melanocytes and other types of skin cells. Granulocyte colony-stimulating factor receptor (CSF3R) controls the survival, proliferation and differentiation of many kinds of cells, including neutrophils. To understand the function of CSF3R and recombinant human granulocyte colony-stimulating factor (rhCSF3) on melanocyte proliferation, this study compared the expression of CSF3R and the effects of rhCSF3 in primary human melanocytes, neutrophils and HEL 92.1.7 cells. The results show that CSF3R is localized in the cytoplasm and on cell membranes of melanocytes and neutrophils. The percentage of CSF3R(+) melanocytes was higher than CSF3R(+) HEL 92.1.7 cells, but was lower than CSF3R(+) neutrophils. Both CSF3R mRNA and CSF3R protein levels in melanocytes were higher than in HEL 92.1.7 cells, but were lower than in neutrophils. Treatment with rhCSF3 increased the proliferation of human melanocytes, but not their tyrosinase activity. Transcripts of CSF3R in human melanocytes, M14, A375 melanoma and A431 squamous cell carcinoma cells were also detected. Expression of the CSF3R V3 transcript was lower in melanocytes than in M14, A375 melanoma and A431 squamous cell carcinoma cells. In conclusion, rhCSF3 can promote melanocyte proliferation through CSF3R without affecting tyrosinase activity.

  11. Inherited biallelic CSF3R mutations in severe congenital neutropenia

    PubMed Central

    Triot, Alexa; Järvinen, Päivi M.; Arostegui, Juan I.; Murugan, Dhaarini; Kohistani, Naschla; Dapena Díaz, José Luis; Racek, Tomas; Puchałka, Jacek; Gertz, E. Michael; Schäffer, Alejandro A.; Kotlarz, Daniel; Pfeifer, Dietmar; Díaz de Heredia Rubio, Cristina; Ozdemir, Mehmet Akif; Patiroglu, Turkan; Karakukcu, Musa; Sánchez de Toledo Codina, José; Yagüe, Jordi; Touw, Ivo P.; Unal, Ekrem

    2014-01-01

    Severe congenital neutropenia (SCN) is characterized by low numbers of peripheral neutrophil granulocytes and a predisposition to life-threatening bacterial infections. We describe a novel genetic SCN type in 2 unrelated families associated with recessively inherited loss-of-function mutations in CSF3R, encoding the granulocyte colony-stimulating factor (G-CSF) receptor. Family A, with 3 affected children, carried a homozygous missense mutation (NM_000760.3:c.922C>T, NP_000751.1:p.Arg308Cys), which resulted in perturbed N-glycosylation and aberrant localization to the cell surface. Family B, with 1 affected infant, carried compound heterozygous deletions provoking frameshifts and premature stop codons (NM_000760.3:c.948_963del, NP_000751.1:p.Gly316fsTer322 and NM_000760.3:c.1245del, NP_000751.1:p.Gly415fsTer432). Despite peripheral SCN, all patients had morphologic evidence of full myeloid cell maturation in bone marrow. None of the patients responded to treatment with recombinant human G-CSF. Our study highlights the genetic and morphologic SCN variability and provides evidence both for functional importance and redundancy of G-CSF receptor-mediated signaling in human granulopoiesis. PMID:24753537

  12. Luminal Ca2+ dynamics during IP3R mediated signals

    NASA Astrophysics Data System (ADS)

    Lopez, Lucia F.; Ponce Dawson, Silvina

    2016-06-01

    The role of cytosolic Ca2+ on the kinetics of Inositol 1,4,5-triphosphate receptors (IP3Rs) and on the dynamics of IP3R-mediated Ca2+ signals has been studied at large both experimentally and by modeling. The role of luminal Ca2+ has not been investigated with that much detail although it has been found that it is relevant for signal termination in the case of Ca2+ release through ryanodine receptors. In this work we present the results of observing the dynamics of luminal and cytosolic Ca2+ simultaneously in Xenopus laevis oocytes. Combining observations and modeling we conclude that there is a rapid mechanism that guarantees the availability of free Ca2+ in the lumen even when a relatively large Ca2+ release is evoked. Comparing the dynamics of cytosolic and luminal Ca2+ during a release, we estimate that they are consistent with a 80% of luminal Ca2+ being buffered. The rapid availability of free luminal Ca2+ correlates with the observation that the lumen occupies a considerable volume in several regions across the images.

  13. High Affinity Dopamine D3 Receptor (D3R)-Selective Antagonists Attenuate Heroin Self-Administration in Wild-Type but not D3R Knockout Mice

    PubMed Central

    2015-01-01

    The dopamine D3 receptor (D3R) is a promising target for the development of pharmacotherapeutics to treat substance use disorders. Several D3R-selective antagonists are effective in animal models of drug abuse, especially in models of relapse. Nevertheless, poor bioavailability, metabolic instability, and/or predicted toxicity have impeded success in translating these drug candidates to clinical use. Herein, we report a series of D3R-selective 4-phenylpiperazines with improved metabolic stability. A subset of these compounds was evaluated for D3R functional efficacy and off-target binding at selected 5-HT receptor subtypes, where significant overlap in SAR with D3R has been observed. Several high affinity D3R antagonists, including compounds 16 (Ki = 0.12 nM) and 32 (Ki = 0.35 nM), showed improved metabolic stability compared to the parent compound, PG648 (6). Notably, 16 and the classic D3R antagonist SB277011A (2) were effective in reducing self-administration of heroin in wild-type but not D3R knockout mice. PMID:26203768

  14. A mouse model for a partially inactive obesity-associated human MC3R variant.

    PubMed

    Lee, Bonggi; Koo, Jashin; Yun Jun, Joo; Gavrilova, Oksana; Lee, Yongjun; Seo, Arnold Y; Taylor-Douglas, Dezmond C; Adler-Wailes, Diane C; Chen, Faye; Gardner, Ryan; Koutzoumis, Dimitri; Sherafat Kazemzadeh, Roya; Roberson, Robin B; Yanovski, Jack A

    2016-01-01

    We previously reported children homozygous for two MC3R sequence variants (C17A+G241A) have greater fat mass than controls. Here we show, using homozygous knock-in mouse models in which we replace murine Mc3r with wild-type human (MC3R(hWT/hWT)) and double-mutant (C17A+G241A) human (MC3R(hDM/hDM)) MC3R, that MC3R(hDM/hDM) have greater weight and fat mass, increased energy intake and feeding efficiency, but reduced length and fat-free mass compared with MC3R(hWT/hWT). MC3R(hDM/hDM) mice do not have increased adipose tissue inflammatory cell infiltration or greater expression of inflammatory markers despite their greater fat mass. Serum adiponectin levels are increased in MC3R(hDM/hDM) mice and MC3R(hDM/hDM) human subjects. MC3R(hDM/hDM) bone- and adipose tissue-derived mesenchymal stem cells (MSCs) differentiate into adipocytes that accumulate more triglyceride than MC3R(hWT/hWT) MSCs. MC3R(hDM/hDM) impacts nutrient partitioning to generate increased adipose tissue that appears metabolically healthy. These data confirm the importance of MC3R signalling in human metabolism and suggest a previously-unrecognized role for the MC3R in adipose tissue development. PMID:26818770

  15. Simultaneous removal of ammonium and suspended solids in multipurpose filters.

    PubMed

    Alkas, Deniz; Baykal, Bilsen Beler; Kinaci, Cumali

    2012-06-01

    A multipurpose filter in which sand and clinoptilolite are used together as filter material is suggested for the simultaneous removal of suspended solids and ammonium in one single unit. The capacity of the clinoptilolite used was determined as 10.4 mg/g for 20 mg/l initial ammonium concentration. In addition, a packed column ion exchanger with clinoptilolite and a classical sand filter were also investigated for comparison. Ammonium and suspended solids removal rates were observed and compared for all columns. The results of the column analysis have revealed that the ammonium removal rate, which was only 20% in the sand column, was increased to 100% by replacing 50% of the sand with clinoptilolite; similarly, the suspended solids removal, which was only 17% in the clinoptilolite column, was increased to 75% by replacing 50% of the clinoptilolite with sand. As such, when ion exchange and filtration processes were carried out in a multipurpose column, high removals for both parameters could be obtained simultaneously. Multipurpose columns could be an alternative both for the upgrading of existing treatment plants or for new plants for simultaneous removal of ammonium and suspended solids, giving considerable savings in terms of land requirements.

  16. The CE3R Network: current status and future perspectives

    NASA Astrophysics Data System (ADS)

    Lenhardt, Wolfgang; Pesaresi, Damiano; Živčić, Mladen; Costa, Giovanni; Kuk, Kresimir; Bondár, István; Duni, Llambro; Spacek, Petr

    2016-04-01

    In order to improve the monitoring of seismic activities in the border regions and to enhance the collaboration between countries and seismological institutions in Central Europe, the Environment Agency of the Slovenian Republic (ARSO), the Italian National Institute for Oceanography and Experimental Geophysics (OGS), the University of Trieste (UniTS) and the Austrian Central Institute for Meteorology and Geodynamics (ZAMG) established in 2001 the "South Eastern Alps Transfrontier Seismological Network". In May 2014 ARSO, OGS, UniTS and ZAMG agreed to formalize the transfrontier network, to name it "Central and East European Earthquake Research Network", (CE3RN or CE3R Network) in order to locate it geographically since cross-border networks can be established in other areas of the world and to expand their cooperation, including institutions in other countries. The University of Zagreb (UniZG) joined CE3RN in October 2014. The Kövesligethy Radó Seismological Observatory (KRSZO) of the Hungarian Academy of Sciences joined CE3RN in October 2015. The Institute of Geosciences, Energy, Water and Environment (IGEWE) of the Polytechnic University of Tirana joined CE3RN in November 2015. The Institute of Physics of the Earth (IPE) of the Masaryk University in Brno joined CE3RN in November 2015. CE3RN Parties intend to formalize and possibly extend their ongoing cooperation in the field of seismological data acquisition, exchange and use for seismological and earthquake engineering and civil protection purposes. The purpose of this cooperation is to retain and expand the existing cross-border network, specify the rules of conduct in the network management, improvements, extensions and enlargements, enhance seismological research in the region, and support civil protection activities. Since the formal establishment of CE3RN, several common projects have been completed, like the SeismoSAT project for the seismic data center connection over satellite funded by the Interreg

  17. Multipurpose aircraft monitoring with a smart recorder

    NASA Technical Reports Server (NTRS)

    White, J. H.; Finger, J. F.; Alfonsi, P. J.

    1986-01-01

    This paper describes a microprocessor-based flight recorder the 'Smart Recorder' - which was developed and installed on a King Air aircraft used for commercial charter service. The recorder is used as a research tool for developing monitoring strategies and processing algorithms to: (1) characterize the typical flight environment encountered by the host aircraft, (2) develop technology for automated engine trend monitoring, and (3) implement a crash recording capability. Initially the recorder was used as an adaptive data acquisition system, monitoring engine sensors and flight instruments and then modifying its data acquisition in response to the perceived aircraft situation. Data collected in this manner were stored in a removable bubble memory and subsequently analyzed in the laboratory. Later, on-board processing was implemented to better utilize the available storage capacity.

  18. [Early rehabilitation of vascular amputees. Value of the multipurpose prosthesis].

    PubMed

    Brenot, R; Grumler, B; Didier, J P; David, M

    1984-01-01

    After a recall of surgical indications and of technical points of the lower limbs amputations in arteriosclerosis disease, the authors report their experience of early rehabilitation. They define the aims of the rehabilitation and the means to reach it. Among these, a multipurpose prosthesis made by them, authorized their patients to an early walk training. The results are analysed with 86 patients rehabilitated in 2 years by this method. They have 49 good results/51 with amputation below the knee, 31 good results/35 with femoral amputation. The mean age of the patients is 72. PMID:6502020

  19. Programmable Thermostat Module Upgrade for the Multipurpose Logistics Module

    NASA Technical Reports Server (NTRS)

    Clark, D. W.; Glasgow, S. d.; Reagan, S. E.; Presson, K. H.; Howard, D. E.; Smith, D. A.

    2007-01-01

    The STS-121/ULF 1.1 mission was the maiden flight of the programmable thermostat module (PTM) system used to control the 28 V shell heaters on the multi-purpose logistics module (MPLM). These PTMs, in conjunction with a data recorder module (DRM), provide continuous closed loop temperature control and data recording of MPLM on-orbit heater operations. This Technical Memorandum discusses the hardware design, development, test, and verification (DDT&V) activities performed at the Marshall Space Flight Center as well as the operational implementation and mission performance.

  20. The Multi-Purpose Detector (MPD) of the collider experiment

    NASA Astrophysics Data System (ADS)

    Golovatyuk, V.; Kekelidze, V.; Kolesnikov, V.; Rogachevsky, O.; Sorin, A.

    2016-08-01

    The project NICA (Nuclotron-based Ion Collider fAcility) is aimed to study dense baryonic matter in heavy-ion collisions in the energy range up to √{s_{NN}} = 11 GeV with average luminosity of L = 1027 cm-2s-1 (for 197Au79). The experimental program at the NICA collider will be performed with the Multi-Purpose Detector (MPD). We report on the main physics objectives of the NICA heavy-ion program and present the main detector components.

  1. 25 CFR 36.103 - What are the requirements for multipurpose spaces in homeliving programs?

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... multipurpose spaces in homeliving programs? Homeliving programs must provide adequate areas for sleeping, study... 25 Indians 1 2013-04-01 2013-04-01 false What are the requirements for multipurpose spaces in homeliving programs? 36.103 Section 36.103 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE...

  2. 25 CFR 36.103 - What are the requirements for multipurpose spaces in homeliving programs?

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... multipurpose spaces in homeliving programs? Homeliving programs must provide adequate areas for sleeping, study... 25 Indians 1 2014-04-01 2014-04-01 false What are the requirements for multipurpose spaces in homeliving programs? 36.103 Section 36.103 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE...

  3. 25 CFR 36.103 - What are the requirements for multipurpose spaces in homeliving programs?

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... multipurpose spaces in homeliving programs? Homeliving programs must provide adequate areas for sleeping, study... 25 Indians 1 2010-04-01 2010-04-01 false What are the requirements for multipurpose spaces in homeliving programs? 36.103 Section 36.103 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE...

  4. 25 CFR 36.103 - What are the requirements for multipurpose spaces in homeliving programs?

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... multipurpose spaces in homeliving programs? Homeliving programs must provide adequate areas for sleeping, study... 25 Indians 1 2011-04-01 2011-04-01 false What are the requirements for multipurpose spaces in homeliving programs? 36.103 Section 36.103 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE...

  5. 25 CFR 36.103 - What are the requirements for multipurpose spaces in homeliving programs?

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... multipurpose spaces in homeliving programs? Homeliving programs must provide adequate areas for sleeping, study... 25 Indians 1 2012-04-01 2011-04-01 true What are the requirements for multipurpose spaces in homeliving programs? 36.103 Section 36.103 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE...

  6. 76 FR 32391 - Notice of Receipt of Petition for Decision That Nonconforming 2007 Dodge Durango Multipurpose...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-06

    ... Register published on April 11, 2000 (65 FR 19477-78). How to Read Comments submitted to the Docket: You... Nonconforming 2007 Dodge Durango Multipurpose Passenger Vehicles Manufactured for the Mexican Market Are... Administration (NHTSA) of a petition for a decision that 2007 Dodge Durango multipurpose passenger vehicles...

  7. SLC9A3R1 stimulates autophagy via BECN1 stabilization in breast cancer cells.

    PubMed

    Liu, Hong; Ma, Yan; He, Hong-Wei; Wang, Jia-Ping; Jiang, Jian-Dong; Shao, Rong-Guang

    2015-01-01

    Autophagy, a self-catabolic process, has been found to be involved in abrogating the proliferation and metastasis of breast cancer. SLC9A3R1 (solute carrier family 9, subfamily A [NHE3, cation proton antiporter 3], member 3 regulator 1), a multifunctional scaffold protein, is involved in suppressing breast cancer cells proliferation and the SLC9A3R1-related signaling pathway regulates the activation of autophagy processes. However, the precise regulatory mechanism and signaling pathway of SLC9A3R1 in the regulation of autophagy processes in breast cancer cells remains unknown. Here, we report that the stability of BECN1, the major component of the autophagic core lipid kinase complex, is augmented in SLC9A3R1-overexpressing breast cancer MDA-MB-231 cells, subsequently stimulating autophagy by attenuating the interaction between BECN1 and BCL2. Initially, we found that SLC9A3R1 partially stimulated autophagy through the PTEN-PI3K-AKT1 signaling cascade in MDA-MB-231 cells. SLC9A3R1 then attenuated the interaction between BECN1 and BCL2 to stimulate the autophagic core lipid kinase complex. Further findings revealed that SLC9A3R1 bound to BECN1 and subsequently blocked ubiquitin-dependent BECN1 degradation. And the deletion of the C-terminal domain of SLC9A3R1 resulted in significantly reduced binding to BECN1. Moreover, the lack of C-terminal of SLC9A3R1 neither reduced the ubiquitination of BECN1 nor induced autophagy in breast cancer cells. The decrease in BECN1 degradation induced by SLC9A3R1 resulted in the activity of autophagy stimulation in breast cancer cells. These findings indicate that the SLC9A3R1-BECN1 signaling pathway participates in the activation of autophagy processes in breast cancer cells.

  8. Multipurpose bus interface utilizing a digital signal processor

    NASA Astrophysics Data System (ADS)

    Houlberg, Christian L.

    1994-09-01

    A multi-purpose bus interface comprising a digital signal processor which receives a clock signal and control signals from a Manchester type encoder/decoder and then processes the clock and control signals allowing for the serial transfer of data to and from the 1553 multiplex data bus, the encoder/decoder and the digital signal processor into an IC memory card for storage in or retrieval from the IC memory card. Software stored in an electrically erasable programmable read only memory controls how the data is transferred and interpreted making it easier to modify the digital signal processor's operation to accommodate its use with different bus standards and data protocols/formats. The encoder/decoder of the present invention formats and protocols data transferred from the electrically erasable programmable read only memory to the 1553 multiplex data bus as well data transferred from the 1553 multiplex data bus to the memory, as appropriate. The multipurpose bus interface of the present invention also includes an RS-232 interface and an RS-422 interface controlled by the digital signal processor which provides for data transfer to and from a host computer or the like into the IC memory card.

  9. System Engineering Strategy for Distributed Multi-Purpose Simulation Architectures

    NASA Technical Reports Server (NTRS)

    Bhula, Dlilpkumar; Kurt, Cindy Marie; Luty, Roger

    2007-01-01

    This paper describes the system engineering approach used to develop distributed multi-purpose simulations. The multi-purpose simulation architecture focuses on user needs, operations, flexibility, cost and maintenance. This approach was used to develop an International Space Station (ISS) simulator, which is called the International Space Station Integrated Simulation (ISIS)1. The ISIS runs unmodified ISS flight software, system models, and the astronaut command and control interface in an open system design that allows for rapid integration of multiple ISS models. The initial intent of ISIS was to provide a distributed system that allows access to ISS flight software and models for the creation, test, and validation of crew and ground controller procedures. This capability reduces the cost and scheduling issues associated with utilizing standalone simulators in fixed locations, and facilitates discovering unknowns and errors earlier in the development lifecycle. Since its inception, the flexible architecture of the ISIS has allowed its purpose to evolve to include ground operator system and display training, flight software modification testing, and as a realistic test bed for Exploration automation technology research and development.

  10. Multipurpose image watermarking algorithm based on multistage vector quantization.

    PubMed

    Lu, Zhe-Ming; Xu, Dian-Guo; Sun, Sheng-He

    2005-06-01

    The rapid growth of digital multimedia and Internet technologies has made copyright protection, copy protection, and integrity verification three important issues in the digital world. To solve these problems, the digital watermarking technique has been presented and widely researched. Traditional watermarking algorithms are mostly based on discrete transform domains, such as the discrete cosine transform, discrete Fourier transform (DFT), and discrete wavelet transform (DWT). Most of these algorithms are good for only one purpose. Recently, some multipurpose digital watermarking methods have been presented, which can achieve the goal of content authentication and copyright protection simultaneously. However, they are based on DWT or DFT. Lately, several robust watermarking schemes based on vector quantization (VQ) have been presented, but they can only be used for copyright protection. In this paper, we present a novel multipurpose digital image watermarking method based on the multistage vector quantizer structure, which can be applied to image authentication and copyright protection. In the proposed method, the semi-fragile watermark and the robust watermark are embedded in different VQ stages using different techniques, and both of them can be extracted without the original image. Simulation results demonstrate the effectiveness of our algorithm in terms of robustness and fragility. PMID:15971780

  11. Designing a multipurpose technology for acceptability and adherence

    PubMed Central

    Tolley, Elizabeth E.; Morrow, Kathleen M.; Owen, Derek H.

    2015-01-01

    Multipurpose Prevention Technologies (MPTs) are new tools aimed at reducing or preventing multiple and overlapping sexual and reproductive health risks faced by women and couples around the globe. While MPTs could prove more acceptable and easier to adhere to than single-purpose prevention products, continuing high rates of HIV and unintended pregnancy remind us that these new products will need to be efficacious, acceptable and effectively used to achieve a public health impact. In this paper, we describe how a range of research methods can be applied during the pre-clinical phase of product development to inform decisions related to formulation and vehicle or product delivery mechanisms, and consider how choices in product-related characteristics may influence future demand for, delivery and use of future products. We draw on examples from the development of new single-purpose HIV and contraceptive products and then extend our discussion to the development of MPTs, including vaginal rings and injections. This article is based on a presentation at the “Product Development Workshop 2013: HIV and Multipurpose Prevention Technologies,” held in Arlington, Virginia on February 21-22, 2013. It forms part of a special supplement to Antiviral Research. PMID:24188706

  12. The SQ3R Study Technique Enhances Comprehension of an Introductory Psychology Textbook.

    ERIC Educational Resources Information Center

    Chastain, Garvin; Thurber, Steven

    1989-01-01

    Examines the effectiveness of the SQ3R study technique in enhancing comprehension of material in an introductory psychology textbook. Finds significantly better performance on tests of recall or conceptual items for students using SQ3R than for those using individual study methods. (RS)

  13. Space Food Systems Laboratory

    NASA Technical Reports Server (NTRS)

    Perchonok, Michele; Russo, Dane M. (Technical Monitor)

    2001-01-01

    The Space Food Systems Laboratory (SFSL) is a multipurpose laboratory responsible for space food and package research and development. It is located on-site at Johnson Space Center in Building 17. The facility supports the development of flight food, menus, packaging and food related hardware for Shuttle, International Space Station, and Advanced Life Support food systems. All foods used to support NASA ground tests and/or missions must meet the highest standards before they are 'accepted' for use on actual space flights. The foods are evaluated for nutritional content, sensory acceptability, safety, storage and shelf life, and suitability for use in micro-gravity. The food packaging is also tested to determine its functionality and suitability for use in space. Food Scientist, Registered Dieticians, Packaging Engineers, Food Systems Engineers, and Technicians staff the Space Food Systems Laboratory.

  14. Multipurpose Panel Display Device Investigation. [technology assessment and product development

    NASA Technical Reports Server (NTRS)

    Sliwa, R.

    1977-01-01

    A multipurpose panel was developed to provide a flexible control and a LED display panel with easily changeable nomenclature for use in applications where panel space is limited, but where a number of similar subsystems must be controlled, or where basic panel nomenclature and functions must be changed rapidly, as in the case of between mission changes of space shuttle payloads. In the first application, panel area limitations are overcome by time sharing a central control panel among several subsystems. In the latter case, entire control panel changes are effected by simply replacing a memory module, thereby reducing the extent of installation and checkout procedures between missions. Several types of control technologies (other than LED's) which show potential in meeting criteria for overcoming limitations of the panel are assessed.

  15. Nonpoint source pollution management for the multipurpose dam watersheds.

    PubMed

    Choi, J-Y

    2008-01-01

    Main pollution sources in multipurpose dam watersheds in Korea are highland fields, stream banks, livestock farms, roads, and construction sites. Specifically, highland fields are the major nonpoint pollution sources. Excessive organic chemicals such as fertilizer and pesticide can be exuded from the land, and the area is likely to be eroded by heavy rain. Fallow, conservative cultivation, and covering can be alternatives for soil protection and reinforcement. In addition to these, construction of detour waterways and improvement of irrigation method can minimize the impact of runoff. In the case of slope in 15% degree or more, prohibiting cultivation and restoring the surface is preferred to improving cultivation method in order to control nonpoint pollution sources efficiently.

  16. Multipurpose prevention technologies: the future of HIV and STI protection

    PubMed Central

    2015-01-01

    Every day, more than 1 million people are newly infected with sexually transmitted infections (STIs) that can lead to morbidity, mortality, and an increased risk of human immunodeficiency virus (HIV) acquisition. Existing prevention and management strategies, including behavior change, condom promotion, and therapy have not reduced the global incidence and prevalence, pointing to the need for novel innovative strategies. This review summarizes important issues raised during a satellite session at the first HIV R4P conference, held in Cape Town, on October 31, 2014. We explore key STIs that are challenging public health today; new biomedical prevention approaches including multipurpose prevention technologies (MPTs); and the scientific and regulatory hurdles that must be overcome to make combination prevention tools a reality. PMID:25759332

  17. Multi-purpose canister system evaluation: A systems engineering approach

    SciTech Connect

    Not Available

    1994-09-01

    This report summarizes Department of Energy (DOE) efforts to investigate various container systems for handling, transporting, storing, and disposing of spent nuclear fuel (SNF) assemblies in the Civilian Radioactive Waste Management System (CRWMS). The primary goal of DOE`s investigations was to select a container technology that could handle the vast majority of commercial SNF at a reasonable cost, while ensuring the safety of the public and protecting the environment. Several alternative cask and canister concepts were evaluated for SNF assembly packaging to determine the most suitable concept. Of these alternatives, the multi-purpose canister (MPC) system was determined to be the most suitable. Based on the results of these evaluations, the decision was made to proceed with design and certification of the MPC system. A decision to fabricate and deploy MPCs will be made after further studies and preparation of an environmental impact statement.

  18. Development of a multipurpose hand controller for JEMRMS

    NASA Technical Reports Server (NTRS)

    Matsuhira, Nobuto; Iikura, Shoichi; Asakura, Makoto; Shinomiya, Yasuo

    1990-01-01

    A prototype multipurpose hand controller for the JEMRMS (Japanese Experiment Module Remote Manipulator System) was developed. The hand controller (H/C) is an orthogonal type, with 6 degrees of freedom (DOF) and small size. The orthogonal type H/C is very simple for coordinate transformations and can easily control any type of manipulators. In fact, the JEMRMS is planned to have two manipulators controlled by a common H/C at this stage. The H/C was able to be used as a rate control joystick and a force reflection master arm, using an experimental 6 DOF manipulator. Good maneuverability was confirmed in the verification test. The orthogonal type H/C is suitable for use as a common H/C for the two manipulators of the JEMRMS.

  19. Multipurpose optimization models for high level waste vitrification

    SciTech Connect

    Hoza, M.

    1994-08-01

    Optimal Waste Loading (OWL) models have been developed as multipurpose tools for high-level waste studies for the Tank Waste Remediation Program at Hanford. Using nonlinear programming techniques, these models maximize the waste loading of the vitrified waste and optimize the glass formers composition such that the glass produced has the appropriate properties within the melter, and the resultant vitrified waste form meets the requirements for disposal. The OWL model can be used for a single waste stream or for blended streams. The models can determine optimal continuous blends or optimal discrete blends of a number of different wastes. The OWL models have been used to identify the most restrictive constraints, to evaluate prospective waste pretreatment methods, to formulate and evaluate blending strategies, and to determine the impacts of variability in the wastes. The OWL models will be used to aid in the design of frits and the maximize the waste in the glass for High-Level Waste (HLW) vitrification.

  20. Multipurpose Cargo Transfer Bags fro Reducing Exploration Mission Logistics

    NASA Technical Reports Server (NTRS)

    Baccus, Shelley; Broyan, James Lee, Jr.; Borrego, Melissa

    2016-01-01

    The Logistics Reduction (LR) project within the Advanced Exploration Systems (AES) division is tasked with reducing logistical mass and repurposing logistical items. Multipurpose Cargo Transfer Bags (MCTB) have been designed such that they can serve the same purpose as a Cargo Transfer Bag (CTB), the common logistics carrying bag for the International Space Station (ISS). After use as a cargo carrier, a regular CTB becomes trash, whereas the MCTB can be unfolded into a flat panel for reuse. Concepts and potential benefits for various MCTB applications will be discussed including partitions, crew quarters, solar radiation storm shelters, acoustic blankets, and forward osmosis water processing. Acoustic MCTBs are currently in use on ISS to reduce the noise generated by the T2 treadmill, which reaches the hazard limit at high speeds. The development of the AMCTB included identification of keep out zones, acoustic properties, deployment considerations, and structural testing. Features developed for these considerations are applicable to MCTBs for all crew outfitting applications.

  1. Reducing Mission Logistics with Multipurpose Cargo Transfer Bags

    NASA Technical Reports Server (NTRS)

    Baccus, Shelley; Broyan, James Lee, Jr.; Borrego, Melissa

    2016-01-01

    The Logistics Reduction (LR) project within Advanced Exploration Systems (AES) is tasked with reducing logistical mass and repurposing logistical items. Multipurpose Cargo Transfer Bags (MCTB) have been designed such that they can serve the same purpose as a Cargo Transfer Bag (CTB), the common logistics carrying bag for the International Space Station (ISS). After use as a cargo carrier, a regular CTB becomes trash, whereas the MCTB can be unfolded into a flat panel for reuse. Concepts and potential benefits for various MCTB applications will be discussed including partitions, crew quarters, solar radiation storm shelters, acoustic blankets, and forward osmosis water processing. Acoustic MCTBs are currently in use on ISS to reduce the noise generated by the T2 treadmill, which reaches the hazard limit at high speeds. The development of the AMCTB included identification of keep-out zones, acoustic properties, deployment considerations, and structural testing. Features developed for these considerations are applicable to MCTBs for all crew outfitting applications.

  2. Design of Multilayer Insulation for the Multipurpose Hydrogen Test Bed

    NASA Technical Reports Server (NTRS)

    Marlow, Weston A.

    2011-01-01

    Multilayer insulation (MLI) is a critical component for future, long term space missions. These missions will require the storage of cryogenic fuels for extended periods of time with little to no boil-off and MLI is vital due to its exceptional radiation shielding properties. Several MLI test articles were designed and fabricated which explored methods of assembling and connecting blankets, yielding results for evaluation. Insight gained, along with previous design experience, will be used in the design of the replacement blanket for the Multipurpose Hydrogen Test Bed (MHTB), which is slated for upcoming tests. Future design considerations are discussed which include mechanical testing to determine robustness of such a system, as well as cryostat testing of samples to give insight to the loss of thermal performance of sewn panels in comparison to the highly efficient, albeit laborious application of the original MHTB blanket.

  3. An Atmospheric Cloud Physics Laboratory for the Space Laboratory

    NASA Technical Reports Server (NTRS)

    Smith, R.; Anderson, J.; Schrick, B.; Ellsworth, C.; Davis, M.

    1976-01-01

    Results of research and engineering analyses to date show that it is feasible to develop and fly on the first Spacelab mission a multipurpose laboratory in which experiments can be performed on the microphysical processes in atmospheric clouds. The paper presents a series of tables on the Atmospheric Cloud Physics Laboratory, with attention given to experiment classes, the preliminary equipment list (particle generators, optical and imaging devices, particle detectors and characterizers, etc.), initial equipment (scientific equipment subsystems and flight support subsystems), and scientific functional requirements (the expansion chamber, the continuous flow diffusion chamber, the static diffusion chamber, the humidifier, and particle generators).

  4. Hanford environmental analytical methods (methods as of March 1990). Appendix A3-R

    SciTech Connect

    Goheen, S.C.; McCulloch, M.; Daniel, J.L.

    1993-05-01

    Techniques in use at the Hanford Reservation as of March, 1990 for the analysis of liquids and radioactive effluents are described. Limitations and applications of the techniques are included. This report is Appendix A3-R.

  5. SQ3R Doesn't Work--Or Does It?

    ERIC Educational Resources Information Center

    Kopfstein, Robert Wm.

    The SQ3R method has been the backbone of textbook reading strategies for over 20 years. However, research indicates that students--even though they know how to use the technique--do not apply it because they believe it is too involved and too time consuming. Theoretically, SQ3R is a sound technique based on current knowledge about brain functions,…

  6. Design and characterization of specMACS, a multipurpose hyperspectral cloud and sky imager

    NASA Astrophysics Data System (ADS)

    Ewald, F.; Kölling, T.; Baumgartner, A.; Zinner, T.; Mayer, B.

    2015-09-01

    The new spectrometer of the Munich Aerosol Cloud Scanner (specMACS) is a multipurpose hyperspectral cloud and sky imager designated, but not limited to investigations of cloud-aerosol interactions in Earth's atmosphere. Equipped with a high spectral and spatial resolution, the instrument is designed to measure solar radiation in the visible and short-wave infrared region that is reflected from, or transmitted through clouds and aerosol layers. It is based on two hyperspectral line cameras that measure in the solar spectral range between 400-2500 nm with a spectral bandwidth between 2.5-12.0 nm. The instrument was already operated in ground-based campaigns as well as aboard the German High Altitude LOng Range (HALO) research aircraft, e.g. during the ACRIDICON-CHUVA campaign in Brazil during summer 2014. This paper describes the specMACS instrument hardware and software design and characterizes the instrument performance. During the laboratory characterization of the instrument the radiometric response as well as the spatial and spectral performance was assessed. Since the instrument is primarily intended for retrievals of atmospheric quantities by inversion of radiative models using measured radiances, a focus is placed on the determination of its radiometric response. Radiometric characterization was possible for both spectrometers with an absolute accuracy of 3 % at their respective central wavelength regions. First measurements are presented which demonstrate the application possibilities and show that the key demands on radiometric and spectral accuracy as posed by the intended remote sensing techniques are fulfilled.

  7. Design and characterization of specMACS, a multipurpose hyperspectral cloud and sky imager

    NASA Astrophysics Data System (ADS)

    Ewald, Florian; Kölling, Tobias; Baumgartner, Andreas; Zinner, Tobias; Mayer, Bernhard

    2016-05-01

    The new spectrometer of the Munich Aerosol Cloud Scanner (specMACS) is a multipurpose hyperspectral cloud and sky imager designated, but is not limited to investigations of cloud-aerosol interactions in Earth's atmosphere. With its high spectral and spatial resolution, the instrument is designed to measure solar radiation in the visible and shortwave infrared region that is reflected from, or transmitted through clouds and aerosol layers. It is based on two hyperspectral cameras that measure in the solar spectral range between 400 and 2500 nm with a spectral bandwidth between 2.5 and 12.0 nm. The instrument was operated in ground-based campaigns as well as aboard the German High Altitude LOng Range (HALO) research aircraft, e.g., during the ACRIDICON-CHUVA campaign in Brazil during summer 2014. This paper describes the specMACS instrument hardware and software design and characterizes the instrument performance. During the laboratory characterization of the instrument, the radiometric response as well as the spatial and spectral resolution was assessed. Since the instrument is primarily intended for retrievals of atmospheric quantities by inversion of radiative models using measured radiances, a focus is placed on the determination of its radiometric response. Radiometric characterization was possible for both spectrometers, with an absolute accuracy of 3 % at their respective central wavelength regions. First measurements are presented which demonstrate the wide applicability of the instrument. They show that key demands are met regarding the radiometric and spectral accuracy which is required for the intended remote sensing techniques.

  8. Study of development and utilization of a multipurpose atmospheric corrosion sensor

    NASA Technical Reports Server (NTRS)

    Diwan, Ravinder M.; Raman, A.; Bhattacharya, P. K.

    1994-01-01

    There has been a critical need for analyzing various aspects of atmospheric corrosion and for the development of atmospheric corrosion microsensors. The project work has involved the following activities: (1) making of multielectrode corrosion monitors on dielectric substrates; (2) testing them in the laboratory for functional characteristics; (3) preparing a report on the state of the art of atmospheric corrosion sensor development around the world; and (4) corrosion testing of electrochemical changes of sensor specimens and related fog testing. The study included work on the subject of development and utilization of a multipurpose atmospheric corrosion sensor and this report is the annual report on work carried out on this research project. This has included studies on the development of sensors of two designs, stage 1 and stage 2, and with glass and alumina substrate, experimentation and development and characterization of the coating uniformity, aspects of corrosion monitoring, literature search on the corrosion sensors and their development. A state of the art report on atmospheric corrosion sensor development was prepared and submitted.

  9. Night eating and obesity in the EP3R-deficient mouse.

    PubMed

    Sanchez-Alavez, Manuel; Klein, Izabella; Brownell, Sara E; Tabarean, Iustin V; Davis, Christopher N; Conti, Bruno; Bartfai, Tamas

    2007-02-20

    Adult mice carrying a null mutation of the prostanoid receptor EP3R (EP3R(-/-) mice) exhibit increased frequency of feeding during the light cycle of the day and develop an obese phenotype under a normal fat diet fed ad libitum. EP3R(-/-) mice show increased motor activity, which is not sufficient to offset the increased feeding leading to increased body weight. Altered "nocturnal" activity and feeding behavior is present from a very early age and does not seem to require age-dependent factors for the development of obesity. Obesity in EP3R(-/-) mice is characterized by elevated leptin and insulin levels and >20% higher body weight compared with WT littermates. Abdominal and subcutaneous fat and increased liver weight account for the weight increase in EP3R(-/-) mice. These observations expand the roles of prostaglandin E(2) signaling in metabolic regulation beyond the reported stimulation of leptin release from adipose tissue to involve actions mediated by EP3R in the regulation of sleep architecture and feeding behavior. The findings add to the growing literature on links between inflammatory signaling and obesity.

  10. A potent antibrowning agent from pine needles of Cedrus deodara: 2R,3R-dihydromyricetin.

    PubMed

    Liang, Xue; Wu, Yan-Ping; Qiu, Jing-Hong; Zhong, Kai; Gao, Hong

    2014-09-01

    This article focuses on finding the novel antibrowning agents from the pine needles of Cedrus deodara and studying its antibrowning effect. By bioassay guide of tyrosinase inhibitory activity, the main active compound was isolated and purified from 50% methanol extract of pine needles of C. deodara through macroporous resin Diaion HP-20 column chromatography and high-performance liquid chromatography. Based on mass and nuclear magnetic resonance data, the active compound was identified as 2R,3R-dihydromyricetin, which showed the potent monophenolase and diphenolase inhibitory activities. Moreover, 2R,3R-dihydromyricetin exhibited a strong ABTS radical scavenging activity with a dose-dependent manner. The antibrowning efficacy of 2R,3R-dihydromyricetin was evaluated by monitoring the changes of L*, a*, and b* values and total color difference (△E) on fresh-cut apple slices. It was found that 2R,3R-dihydromyricetin was effective in inhibiting the browning of apple slices treated with a concentration as low as 0.05% at 25 °C for 24 h. Its antibrowning effect was significantly better than ascorbic acid (0.5%) alone. Furthermore, 2R,3R-dihydromyricetin showed a good synergistic antibrowning effect with ascorbic acid. This is the first report that 2R,3R-dihydromyricetin from pine needles of C. deodara may be used as a potential antibrowning agent in protecting against food browning. PMID:25163933

  11. ERP44 inhibits human lung cancer cell migration mainly via IP3R2.

    PubMed

    Huang, Xue; Jin, Meng; Chen, Ying-Xiao; Wang, Jun; Zhai, Kui; Chang, Yan; Yuan, Qi; Yao, Kai-Tai; Ji, Guangju

    2016-06-01

    Cancer cell migration is involved in tumour metastasis. However, the relationship between calcium signalling and cancer migration is not well elucidated. In this study, we used the human lung adenocarcinoma A549 cell line to examine the role of endoplasmic reticulum protein 44 (ERP44), which has been reported to regulate calcium release inside of the endoplasmic reticulum (ER), in cell migration. We found that the inositol 1,4,5-trisphosphate receptors (IP3Rs/ITPRs) inhibitor 2-APB significantly inhibited A549 cell migration by inhibiting cell polarization and pseudopodium protrusion, which suggests that Ca2+ is necessary for A549 cell migration. Similarly, the overexpression of ERP44 reduced intracellular Ca2+ release via IP3Rs, altered cell morphology and significantly inhibited the migration of A549 cells. These phenomena were primarily dependent on IP3R2 because wound healing in A549 cells with IP3R2 rather than IP3R1 or IP3R3 siRNA was markedly inhibited. Moreover, the overexpression of ERP44 did not affect the migration of the human neuroblastoma cell line SH-SY5Y, which mainly expresses IP3R1. Based on the above observations, we conclude that ERP44 regulates A549 cell migration mainly via an IP3R2-dependent pathway.

  12. A potent antibrowning agent from pine needles of Cedrus deodara: 2R,3R-dihydromyricetin.

    PubMed

    Liang, Xue; Wu, Yan-Ping; Qiu, Jing-Hong; Zhong, Kai; Gao, Hong

    2014-09-01

    This article focuses on finding the novel antibrowning agents from the pine needles of Cedrus deodara and studying its antibrowning effect. By bioassay guide of tyrosinase inhibitory activity, the main active compound was isolated and purified from 50% methanol extract of pine needles of C. deodara through macroporous resin Diaion HP-20 column chromatography and high-performance liquid chromatography. Based on mass and nuclear magnetic resonance data, the active compound was identified as 2R,3R-dihydromyricetin, which showed the potent monophenolase and diphenolase inhibitory activities. Moreover, 2R,3R-dihydromyricetin exhibited a strong ABTS radical scavenging activity with a dose-dependent manner. The antibrowning efficacy of 2R,3R-dihydromyricetin was evaluated by monitoring the changes of L*, a*, and b* values and total color difference (△E) on fresh-cut apple slices. It was found that 2R,3R-dihydromyricetin was effective in inhibiting the browning of apple slices treated with a concentration as low as 0.05% at 25 °C for 24 h. Its antibrowning effect was significantly better than ascorbic acid (0.5%) alone. Furthermore, 2R,3R-dihydromyricetin showed a good synergistic antibrowning effect with ascorbic acid. This is the first report that 2R,3R-dihydromyricetin from pine needles of C. deodara may be used as a potential antibrowning agent in protecting against food browning.

  13. ERP44 inhibits human lung cancer cell migration mainly via IP3R2

    PubMed Central

    Zhai, Kui; Chang, Yan; Yuan, Qi; Yao, Kai-Tai; Ji, Guangju

    2016-01-01

    Cancer cell migration is involved in tumour metastasis. However, the relationship between calcium signalling and cancer migration is not well elucidated. In this study, we used the human lung adenocarcinoma A549 cell line to examine the role of endoplasmic reticulum protein 44 (ERP44), which has been reported to regulate calcium release inside of the endoplasmic reticulum (ER), in cell migration. We found that the inositol 1,4,5-trisphosphate receptors (IP3Rs/ITPRs) inhibitor 2-APB significantly inhibited A549 cell migration by inhibiting cell polarization and pseudopodium protrusion, which suggests that Ca2+ is necessary for A549 cell migration. Similarly, the overexpression of ERP44 reduced intracellular Ca2+ release via IP3Rs, altered cell morphology and significantly inhibited the migration of A549 cells. These phenomena were primarily dependent on IP3R2 because wound healing in A549 cells with IP3R2 rather than IP3R1 or IP3R3 siRNA was markedly inhibited. Moreover, the overexpression of ERP44 did not affect the migration of the human neuroblastoma cell line SH-SY5Y, which mainly expresses IP3R1. Based on the above observations, we conclude that ERP44 regulates A549 cell migration mainly via an IP3R2-dependent pathway. PMID:27347718

  14. Whole body vibration: unsupervised training or combined with a supervised multi-purpose exercise for fitness?

    PubMed

    Emerenziani, Gian Pietro; Meucci, Marco; Gallotta, Maria Chiara; Buzzachera, Cosme Franklim; Guidetti, Laura; Baldari, Carlo

    2014-01-01

    The aim of the study was to compare the effect of an unsupervised whole body vibration (WBV) training and two different supervised multi-purpose exercise programmes, with and without WBV, on body composition, functional fitness and self-reported well-being in middle-aged adults. Fifty-four healthy participants (age 48.6 ± 6.7 years) were randomly assigned to a vibration group (VG), a multi-purpose exercise group (MG) and a multi-purpose exercise with vibration group (VMG) and trained 3 days a week for 4 months. VG performed a standardised unsupervised WBV protocol, MG a supervised multi-purpose exercise and VMG a multi-purpose exercise including vibration. After training, drop out was significantly higher in VG group (P = 0.016) when compared to VMG group. In both MG and VMG, body composition, sit-up, push-up, sit and reach, agility test, hopping test and self-reported general health significantly improved (P < 0.05). No additive effects were generated by the vibration stimulus. Percentage of body fat and agility test in VG had a significant opposite trend compared to VMG group (P < 0.05). In summary, an unsupervised WBV training should not be chosen for training protocol. However, positive effects on physical fitness and the best results in adherence could be achieved integrating WBV practice into a multi-purpose exercise training.

  15. Multipurpose Crew Restraints for Long Duration Space Flights

    NASA Technical Reports Server (NTRS)

    Whitmore, Mihriban; Baggerman, Susan; Ortiz, M. R.; Hua, L.; Sinnott, P.; Webb, L.

    2004-01-01

    With permanent human presence onboard the International Space Station (ISS), a crew will be living and working in microgravity, interfacing with their physical environment. Without optimum restraints and mobility aids (R&MA' s), the crewmembers may be handicapped for perfonning some of the on-orbit tasks. In addition to weightlessness, the confined nature of a spacecraft environment results in ergonomic challenges such as limited visibility and access to the activity area and may cause prolonged periods of unnatural postures. Thus, determining the right set of human factors requirements and providing an ergonomically designed environment are crucial to astronauts' well-being and productivity. The purpose of this project is to develop requirements and guidelines, and conceptual designs, for an ergonomically designed multi-purpose crew restraint. In order to achieve this goal, the project would involve development of functional and human factors requirements, design concept prototype development, analytical and computer modeling evaluations of concepts, two sets of micro gravity evaluations and preparation of an implementation plan. It is anticipated that developing functional and design requirements for a multi-purpose restraint would facilitate development of ergonomically designed restraints to accommodate the off-nominal but repetitive tasks, and minimize the performance degradation due to lack of optimum setup for onboard task performance. In addition, development of an ergonomically designed restraint concept prototype would allow verification and validation of the requirements defined. To date, we have identified "unique" tasks and areas of need, determine characteristics of "ideal" restraints, and solicit ideas for restraint and mobility aid concepts. Focus group meetings with representatives from training, safety, crew, human factors, engineering, payload developers, and analog environment representatives were key to assist in the development of a restraint

  16. Human resources for maternal health: multi-purpose or specialists?

    PubMed Central

    Fauveau, Vincent; Sherratt, Della R; de Bernis, Luc

    2008-01-01

    A crucial question in the aim to attain MDG5 is whether it can be achieved faster with the scaling up of multi-purpose health workers operating in the community or with the scaling up of professional skilled birth attendants working in health facilities. Most advisers concerned with maternal mortality reduction concur to promote births in facilities with professional attendants as the ultimate strategy. The evidence, however, is scarce on what it takes to progress in this path, and on the 'interim solutions' for situations where the majority of women still deliver at home. These questions are particularly relevant as we have reached the twentieth anniversary of the safe motherhood initiative without much progress made. In this paper we review the current situation of human resources for maternal health as well as the problems that they face. We propose seven key areas of work that must be addressed when planning for scaling up human resources for maternal health in light of MDG5, and finally we indicate some advances recently made in selected countries and the lessons learned from these experiences. Whilst the focus of this paper is on maternal health, it is acknowledged that the interventions to reduce maternal mortality will also contribute to significantly reducing newborn mortality. Addressing each of the seven key areas of work – recommended by the first International Forum on 'Midwifery in the Community', Tunis, December 2006 – is essential for the success of any MDG5 programme. We hypothesize that a great deal of the stagnation of maternal health programmes has been the result of confusion and careless choices in scaling up between a limited number of truly skilled birth attendants and large quantities of multi-purpose workers with short training, fewer skills, limited authority and no career pathways. We conclude from the lessons learnt that no significant progress in maternal mortality reduction can be achieved without a strong political decision to

  17. Human resources for maternal health: multi-purpose or specialists?

    PubMed

    Fauveau, Vincent; Sherratt, Della R; de Bernis, Luc

    2008-09-30

    A crucial question in the aim to attain MDG5 is whether it can be achieved faster with the scaling up of multi-purpose health workers operating in the community or with the scaling up of professional skilled birth attendants working in health facilities. Most advisers concerned with maternal mortality reduction concur to promote births in facilities with professional attendants as the ultimate strategy. The evidence, however, is scarce on what it takes to progress in this path, and on the 'interim solutions' for situations where the majority of women still deliver at home. These questions are particularly relevant as we have reached the twentieth anniversary of the safe motherhood initiative without much progress made. In this paper we review the current situation of human resources for maternal health as well as the problems that they face. We propose seven key areas of work that must be addressed when planning for scaling up human resources for maternal health in light of MDG5, and finally we indicate some advances recently made in selected countries and the lessons learned from these experiences. Whilst the focus of this paper is on maternal health, it is acknowledged that the interventions to reduce maternal mortality will also contribute to significantly reducing newborn mortality. Addressing each of the seven key areas of work--recommended by the first International Forum on 'Midwifery in the Community', Tunis, December 2006--is essential for the success of any MDG5 programme. We hypothesize that a great deal of the stagnation of maternal health programmes has been the result of confusion and careless choices in scaling up between a limited number of truly skilled birth attendants and large quantities of multi-purpose workers with short training, fewer skills, limited authority and no career pathways. We conclude from the lessons learnt that no significant progress in maternal mortality reduction can be achieved without a strong political decision to empower

  18. Regulatory acceptance and use of 3R models for pharmaceuticals and chemicals: expert opinions on the state of affairs and the way forward.

    PubMed

    Schiffelers, Marie-Jeanne W A; Blaauboer, Bas J; Bakker, Wieger E; Beken, Sonja; Hendriksen, Coenraad F M; Koëter, Herman B W M; Krul, Cyrille

    2014-06-01

    Pharmaceuticals and chemicals are subjected to regulatory safety testing accounting for approximately 25% of laboratory animal use in Europe. This testing meets various objections and has led to the development of a range of 3R models to Replace, Reduce or Refine the animal models. However, these models must overcome many barriers before being accepted for regulatory risk management purposes. This paper describes the barriers and drivers and options to optimize this acceptance process as identified by two expert panels, one on pharmaceuticals and one on chemicals. To untangle the complex acceptance process, the multilevel perspective on technology transitions is applied. This perspective defines influences at the micro-, meso- and macro level which need alignment to induce regulatory acceptance of a 3R model. This paper displays that there are many similar mechanisms within both sectors that prevent 3R models from becoming accepted for regulatory risk assessment and management. Shared barriers include the uncertainty about the value of the new 3R models (micro level), the lack of harmonization of regulatory requirements and acceptance criteria (meso level) and the high levels of risk aversion (macro level). In optimizing the process commitment, communication, cooperation and coordination are identified as critical drivers.

  19. Central H3R activation by thioperamide does not affect energy balance.

    PubMed

    Sindelar, Dana K; Shepperd, Mary L; Pickard, Richard T; Alexander-Chacko, Jesline; Dill, M Joelle; Cramer, Jeffrey W; Smith, Dennis P; Gadski, Robert

    2004-06-01

    The central histamine 3 receptor (H3R) is a presynaptic autoreceptor that regulates neuronal release and synthesis of histamine, and is thought to play a key role in controlling numerous central nervous system (CNS)-mediated parameters, including energy homeostasis. Thioperamide, the prototypical selective H3R antagonist, was used to examine the role that H3R plays in regulating energy balance in vivo. Thioperamide was administered either intraperitoneally or orally to rats and the pharmacokinetic parameters were examined along with central H3R binding and histaminergic system activation. Food intake and metabolic parameters of either route of thioperamide administration were likewise examined. In a dose-dependent manner, both the intraperitoneal and oral route of administration resulted in similar ex vivo binding curves and tele-methylhistamine dose-response curves despite the route of administration. However, only intraperitoneal administration of 30 mg/kg thioperamide resulted in a significant decrease in 24-h food intake (60% lower than control) and respiratory quotient (RQ), while the oral route of delivery did not. Moreover, the decrease in RQ with the 30 mg/kg ip administration also decreased energy expenditure (EE) thus resulting in an unchanged energy balance. The decrease in food intake and EE was coupled with a conditioned taste aversion with the 30-mg/kg ip administration. These data indicate that the activation of the central H3R system by thioperamide does not play a direct role in decreasing food intake or altering energy homeostasis.

  20. Amphiphilic cationic β(3R3)-peptides: membrane active peptidomimetics and their potential as antimicrobial agents.

    PubMed

    Mosca, Simone; Keller, Janos; Azzouz, Nahid; Wagner, Stefanie; Titz, Alexander; Seeberger, Peter H; Brezesinski, Gerald; Hartmann, Laura

    2014-05-12

    We introduce a novel class of membrane active peptidomimetics, the amphiphilic cationic β(3R3)-peptides, and evaluate their potential as antimicrobial agents. The design criteria, the building block and oligomer synthesis as well as a detailed structure-activity relationship (SAR) study are reported. Specifically, infrared reflection absorption spectroscopy (IRRAS) was employed to investigate structural features of amphiphilic cationic β(3R3)-peptide sequences at the hydrophobic/hydrophilic air/liquid interface. Furthermore, Langmuir monolayers of anionic and zwitterionic phospholipids have been used to model the interactions of amphiphilic cationic β(3R3)-peptides with prokaryotic and eukaryotic cellular membranes in order to predict their membrane selectivity and elucidate their mechanism of action. Lastly, antimicrobial activity was tested against Gram-positive M. luteus and S. aureus as well as against Gram-negative E. coli and P. aeruginosa bacteria along with testing hemolytic activity and cytotoxicity. We found that amphiphilic cationic β(3R3)-peptide sequences combine high and selective antimicrobial activity with exceptionally low cytotoxicity in comparison to values reported in the literature. Overall, this study provides further insights into the SAR of antimicrobial peptides and peptidomimetics and indicates that amphiphilic cationic β(3R3)-peptides are strong candidates for further development as antimicrobial agents with high therapeutic index.

  1. A mouse model for a partially inactive obesity-associated human MC3R variant

    PubMed Central

    Lee, Bonggi; Koo, Jashin; Yun Jun, Joo; Gavrilova, Oksana; Lee, Yongjun; Seo, Arnold Y.; Taylor-Douglas, Dezmond C.; Adler-Wailes, Diane C.; Chen, Faye; Gardner, Ryan; Koutzoumis, Dimitri; Sherafat Kazemzadeh, Roya; Roberson, Robin B.; Yanovski, Jack A.

    2016-01-01

    We previously reported children homozygous for two MC3R sequence variants (C17A+G241A) have greater fat mass than controls. Here we show, using homozygous knock-in mouse models in which we replace murine Mc3r with wild-type human (MC3RhWT/hWT) and double-mutant (C17A+G241A) human (MC3RhDM/hDM) MC3R, that MC3RhDM/hDM have greater weight and fat mass, increased energy intake and feeding efficiency, but reduced length and fat-free mass compared with MC3RhWT/hWT. MC3RhDM/hDM mice do not have increased adipose tissue inflammatory cell infiltration or greater expression of inflammatory markers despite their greater fat mass. Serum adiponectin levels are increased in MC3RhDM/hDM mice and MC3RhDM/hDM human subjects. MC3RhDM/hDM bone- and adipose tissue-derived mesenchymal stem cells (MSCs) differentiate into adipocytes that accumulate more triglyceride than MC3RhWT/hWT MSCs. MC3RhDM/hDM impacts nutrient partitioning to generate increased adipose tissue that appears metabolically healthy. These data confirm the importance of MC3R signalling in human metabolism and suggest a previously-unrecognized role for the MC3R in adipose tissue development. PMID:26818770

  2. Integrating environment, safety and health training at a national laboratory

    SciTech Connect

    Larson, D.R.

    1993-03-01

    In a multi-purpose research laboratory, innovation and creativity are required to satisfy the training requirements for hazards to people and the environment. A climate that encourages excellence in research and enhances hazard minimization skills is created by combining technical expertise with instructional design talent.

  3. Integrating environment, safety and health training at a national laboratory

    SciTech Connect

    Larson, D.R.

    1993-01-01

    In a multi-purpose research laboratory, innovation and creativity are required to satisfy the training requirements for hazards to people and the environment. A climate that encourages excellence in research and enhances hazard minimization skills is created by combining technical expertise with instructional design talent.

  4. Emission reduction by multipurpose buffer strips on arable fields.

    PubMed

    Sloots, K; van der Vlies, A W

    2007-01-01

    In the area managed by Hollandse Delta, agriculture is under great pressure and the social awareness of the agricultural sector is increasing steadily. In recent years, a stand-still has been observed in water quality, in terms of agrochemicals, and concentrations even exceed the standard. To improve the waterquality a multi-purpose Field Margin Regulation was drafted for the Hoeksche Waard island in 2005. The regulation prescribes a crop-free strip, 3.5 m wide, alongside wet drainage ditches. The strip must be sown with mixtures of grasses, flowers or herbs. No crop protection chemicals or fertilizer may be used on the strips. A total length of approximately 200 km of buffer strip has now been laid. Besides reducing emissions, the buffer strips also stimulate natural pest control methods and encourage local tourism. Finally, the strips should lead to an improvement in the farmers' image. The regulation has proved to be successful. The buffer strips boosted both local tourism and the image of the agricultural sector. Above all, the strips provided a natural shield for emission to surface water, which will lead to an improvement of the water quality and raise the farmers' awareness of water quality and the environment.

  5. Real Time Gnss-Sp Network: a Multipurpose Infrastructure

    NASA Astrophysics Data System (ADS)

    Monico, J. G.; Camargo, P. D.; Alves, D. B.; Sapucci, L. F.; Grupo de Estudos em Geodésia Espacial

    2013-05-01

    São Paulo State GNSS Network (GNSS-SP) is one of the densest networks at South Hemisphere. Most of the stations is equipped with meteorological PTU devices. Nowadays it is streaming real time GNSS data, providing support to RTK Network applications, real time TEC (Total Electron Contents) and ZTD/IWV (Zenithal Tropospheric Delay/Integrated Water Vapor) computations. Few stations also provide data to the IGS real time (IGSRT) service. Therefore, such network is characterized as a multipurpose infrastructure, having its data being used either for research in the field of Geodesy or Atmosphere, as well as to support operational applications. In the field of Geodesy it provides support for research related to positioning and reference system realization, detection of deformation, etc. Concerning the atmosphere, fields like Space Weather and Meteorology can take advantage of the derived TEC and ZTD/IWV products. In this presentation, we will show the status of the network, few results concerning the products provided by such infrastructure, besides the plans for the future of the network.

  6. A Multi-purpose Brain-Computer Interface Output Device

    PubMed Central

    Thompson, David E; Huggins, Jane E

    2012-01-01

    While brain-computer interfaces (BCIs) are a promising alternative access pathway for individuals with severe motor impairments, many BCI systems are designed as standalone communication and control systems, rather than as interfaces to existing systems built for these purposes. While an individual communication and control system may be powerful or flexible, no single system can compete with the variety of options available in the commercial assistive technology (AT) market. BCIs could instead be used as an interface to these existing AT devices and products, which are designed for improving access and agency of people with disabilities and are highly configurable to individual user needs. However, interfacing with each AT device and program requires significant time and effort on the part of researchers and clinicians. This work presents the Multi-Purpose BCI Output Device (MBOD), a tool to help researchers and clinicians provide BCI control of many forms of AT in a plug-and-play fashion, i.e. without the installation of drivers or software on the AT device, and a proof-of-concept of the practicality of such an approach. The MBOD was designed to meet the goals of target device compatibility, BCI input device compatibility, convenience, and intuitive command structure. The MBOD was successfully used to interface a BCI with multiple AT devices (including two wheelchair seating systems), as well as computers running Windows (XP and 7), Mac and Ubuntu Linux operating systems. PMID:22208120

  7. World: A multipurpose GPS-network computer package

    NASA Astrophysics Data System (ADS)

    Grafarend, Erik W.; Lindlohr, Wolfgang

    WORLD is a multipurpose package to compute geodetic positions in geometry and gravity space. Here undifferenced GPS carrier beat phase observations are processed in the free network mode, namely by the prototype program called PUMA. Within two alternative model formulations, the classical Gauß-Markov Model and the so-called Mixed Model, simultaneously estimated / predicted parameters are those of type (i) Cartesian ground station coordinates (geodetic positioning), (ii) Cartesian satellite coordinates (orbit determination), (iii) receiver- and satellite-specific bias terms, (iv) initial epoch ambiguities and (v) proportional tropospheric corrections. The Mixed Model parameters appear from linearization as a point of stochastic prior information. Namely the weight matrices of stochastic prior information, e.g. for orbit parameters, is assumed to be known. Estimators of type BLUE and predictors of type inhom BLIP and hom BLUP are used. Chapter four discusses in all detail the real analysis of GPS satellite networks of free type. Most notable are the estimated bias terms α, β, γ, in a twofold classification model. The operability of PUMA is demonstrated by the use of multistation phase observations (Wild-Magnavox WM 101-receivers) in a local Berlin network (six station network). It is documented that in spite of the advanced phase observation modelling an internal relative baseline accuracy (utmost length 30 km) of the order of 3 to 5 ppm is achievable. In addition, the influence of orbital prior information on ground station measures, point position as well as accuracy, is demonstrated.

  8. Multipurpose Power Converter for Non-Grid-Connected Microsystems

    NASA Astrophysics Data System (ADS)

    Vovos, Panagis N.; Georgakas, Konstantinos G.

    2015-04-01

    The aim of this paper is to present a multipurpose converter, appropriate for non-grid-connected microsystems, which are prone to harmonic distortion. The converter suppresses harmonics by injecting mirror harmonics in the modulation stage. An important property is that it continuously monitors and significantly reduces the harmonic content without the use of active or passive low-frequency filters. This is under constant switching frequency, no matter if the harmonics are mainly created by the source, the loads or even its own operation. The converter is regulating output voltage using typical fuzzy control. The two types of control (harmonic and voltage) do not seem to affect each other during operation. Furthermore, it can supply either dc or ac loads from a dc source. The versatility of the converter is a useful property for remote or mobile micropower systems, where neither sources nor loads are of a single type. The converter has been tested successfully for a combination of harmonic-injecting electric appliances and various load step changes.

  9. MYRRHA: A multipurpose accelerator driven system for research & development

    NASA Astrophysics Data System (ADS)

    Abderrahim, H. Aı̈t; Kupschus, P.; Malambu, E.; Benoit, Ph; Van Tichelen, K.; Arien, B.; Vermeersch, F.; D'hondt, P.; Jongen, Y.; Ternier, S.; Vandeplassche, D.

    2001-05-01

    SCK·CEN, the Belgian Nuclear Research Centre, in partnership with IBA s.a., Ion Beam Applications, is designing an ADS prototype, MYRRHA, and is conducting an associated R&D programme. The project focuses primarily on research on structural materials, nuclear fuel, liquid metals and associated aspects, on subcritical reactor physics and subsequently on applications such as nuclear waste transmutation, radioisotope production and safety research on sub-critical systems. The MYRRHA system is intended to be a multipurpose R&D facility and is expected to become a new major research infrastructure for the European partners presently involved in the ADS Demo development. Ion Beam Applications is performing the accelerator development. Currently the preliminary conceptual design of the MYRRHA system is under way and an intensive R&D programme is assessing the points of greatest risk in the present design. This work will define the final choice of characteristics of the facility. In this paper, we will report on the status of the pre-design study as of June 2000 as well as on the methods and results of the R&D programme.

  10. A multi-purpose brain-computer interface output device.

    PubMed

    Thompson, David E; Huggins, Jane E

    2011-10-01

    While brain-computer interfaces (BCIs) are a promising alternative access pathway for individuals with severe motor impairments, many BCI systems are designed as stand-alone communication and control systems, rather than as interfaces to existing systems built for these purposes. An individual communication and control system may be powerful or flexible, but no single system can compete with the variety of options available in the commercial assistive technology (AT) market. BCls could instead be used as an interface to these existing AT devices and products, which are designed for improving access and agency of people with disabilities and are highly configurable to individual user needs. However, interfacing with each AT device and program requires significant time and effort on the part of researchers and clinicians. This work presents the Multi-Purpose BCI Output Device (MBOD), a tool to help researchers and clinicians provide BCI control of many forms of AT in a plug-and-play fashion, i.e., without the installation of drivers or software on the AT device, and a proof-of-concept of the practicality of such an approach. The MBOD was designed to meet the goals of target device compatibility, BCI input device compatibility, convenience, and intuitive command structure. The MBOD was successfully used to interface a BCI with multiple AT devices (including two wheelchair seating systems), as well as computers running Windows (XP and 7), Mac and Ubuntu Linux operating systems.

  11. Spherical chamber effective solution for multipurpose nuclear microprobe

    NASA Astrophysics Data System (ADS)

    Pelicon, P.; Simčič, J.; Jakšić, M.; Medunić, Z.; Naab, F.; McDaniel, F. D.

    2005-04-01

    Vacuum chambers for multipurpose nuclear microprobes must provide for the installation and servicing of several detection systems operating simultaneously, as well as sample visual control and mechanical manipulation. Detectors for X-rays, scattered ions, nuclear reaction products, secondary electrons, secondary luminescence and optical microscopes are mounted at the angles preferably larger than 120° with respect to the beam direction. Their positioning should not increase the space in the region between the ion lens and the focal point of the microprobe. Spherical chambers presented here effectively solve this problem and offer, at the same time, ports for gamma-ray detector, annular microscope, easy manual access in the sample region, ports for vertical and horizontal sample positioning and manipulation, as well as STIM and ERDA detectors at forward scattering angles and the Faraday cup. The basic construction, resulting in the three different but similar chamber designs at three nuclear microprobes worldwide, are presented. Current installation details, comments on the performance and suggested improvements are given.

  12. The acetyllysine reader BRD3R promotes human nuclear reprogramming and regulates mitosis

    PubMed Central

    Shao, Zhicheng; Zhang, Ruowen; Khodadadi-Jamayran, Alireza; Chen, Bo; Crowley, Michael R.; Festok, Muhamad A.; Crossman, David K.; Townes, Tim M.; Hu, Kejin

    2016-01-01

    It is well known that both recipient cells and donor nuclei demonstrate a mitotic advantage as observed in the traditional reprogramming with somatic cell nuclear transfer (SCNT). However, it is not known whether a specific mitotic factor plays a critical role in reprogramming. Here we identify an isoform of human bromodomain-containing 3 (BRD3), BRD3R (BRD3 with Reprogramming activity), as a reprogramming factor. BRD3R positively regulates mitosis during reprogramming, upregulates a large set of mitotic genes at early stages of reprogramming, and associates with mitotic chromatin. Interestingly, a set of the mitotic genes upregulated by BRD3R constitutes a pluripotent molecular signature. The two BRD3 isoforms display differential binding to acetylated histones. Our results suggest a molecular interpretation for the mitotic advantage in reprogramming and show that mitosis may be a driving force of reprogramming. PMID:26947130

  13. No association between ACTN3 R577X polymorphism and elite judo athletic status.

    PubMed

    Rodríguez-Romo, Gabriel; Yvert, Thomas; de Diego, Alfonso; Santiago, Catalina; Díaz de Durana, Alfonso L; Carratalá, Vicente; Garatachea, Nuria; Lucia, Alejandro

    2013-09-01

    The authors compared ACTN3 R577X genotype and allele frequencies in the majority of all-time-best Spanish judo male athletes (n = 108) and 343 ethnically matched nonathletic men. No between-groups differences were found in allele (P = .077) or genotype distributions (P = .178). Thus, the R577X polymorphism was not significantly associated with the status of being an elite judo athlete, at least in the Spanish population. The contribution of genetics to sports-related phenotype traits is undeniable with some genotypes, of which ACTN3 R577X is currently the leading candidate, partly distinguishing individuals predisposed to either endurance or power sports. However, few athletic events can be categorized as purely power or endurance based. Although genetic testing (ie, for ACTN3 R577X) is already being marketed to predict sports talent and potential of young children, its usefulness is still questionable, at least in competitive judo. PMID:23348074

  14. The acetyllysine reader BRD3R promotes human nuclear reprogramming and regulates mitosis.

    PubMed

    Shao, Zhicheng; Zhang, Ruowen; Khodadadi-Jamayran, Alireza; Chen, Bo; Crowley, Michael R; Festok, Muhamad A; Crossman, David K; Townes, Tim M; Hu, Kejin

    2016-03-07

    It is well known that both recipient cells and donor nuclei demonstrate a mitotic advantage as observed in the traditional reprogramming with somatic cell nuclear transfer (SCNT). However, it is not known whether a specific mitotic factor plays a critical role in reprogramming. Here we identify an isoform of human bromodomain-containing 3 (BRD3), BRD3R (BRD3 with Reprogramming activity), as a reprogramming factor. BRD3R positively regulates mitosis during reprogramming, upregulates a large set of mitotic genes at early stages of reprogramming, and associates with mitotic chromatin. Interestingly, a set of the mitotic genes upregulated by BRD3R constitutes a pluripotent molecular signature. The two BRD3 isoforms display differential binding to acetylated histones. Our results suggest a molecular interpretation for the mitotic advantage in reprogramming and show that mitosis may be a driving force of reprogramming.

  15. Cloverleaf domain patterns in multiferroic RMnO3 (R = Ho, Er, and Lu)

    NASA Astrophysics Data System (ADS)

    Horibe, Y.; Chae, S. C.; Lee, N.; Cheong, S.-W.

    2011-03-01

    Hexagonal RMn O3 (R=rare earths) exhibits a unique improper ferroelectricity induced by structural trimerization. Intriguing domain pattern associated with ferroelectricity and trimerization, so-called ``cloverleaf'' domain pattern, has been reported in YMn O3 In this talk, we will report the domain structures in a series of RMn O3 with different rare earth elements, obtained from the results of our transmission electron microscopy. Characteristic cloverleaf domain patterns are clearly observed in RMn O3 (R = Ho, Er, and Lu). The results imply that the cloverleaf domain pattern is a common domain feature in the hexagonal manganites.

  16. Assessing the extent of "conflict of use" in multipurpose tropical forest trees: a regional view.

    PubMed

    Herrero-Jáuregui, Cristina; Guariguata, Manuel R; Cárdenas, Dairon; Vilanova, Emilio; Robles, Marco; Licona, Juan Carlos; Nalvarte, Walter

    2013-11-30

    In the context of multiple forest management, multipurpose tree species which provide both timber and non-timber forest products (NTFP), present particular challenges as the potential of conflicting use for either product may be high. One key aspect is that the magnitude of conflict of use can be location specific, thus adding complexity to policy development. This paper focuses on the extent to which the potential for conflict of use in multipurpose tree species varies across the Amazonian lowland forests shared by Peru, Bolivia, Colombia, Ecuador and Venezuela, emphasizing the economic dimension of conflict. Based on a review of the current normative and regulatory aspects of timber and NTFP extraction in the five countries, the paper also briefly discusses the opportunities and constraints for harmonization of timber and NTFP management of multipurpose species across the region. It was found that about half of the 336 timber species reviewed across the five countries also have non-timber uses. Eleven timber species are multipurpose in all five countries: Calophyllum brasiliense, Cedrela odorata, Ceiba pentandra, Clarisia racemosa, Ficus insipida, Jacaranda copaia, Schefflera morototoni, Simarouba amara and Terminalia amazonia. Seven other multipurpose species occurred only in either Venezuela (Tabebuia impetiginosa, Spondias mombin, Pentaclethra macroloba, Copaifera officinalis, Chlorophora tinctoria, Carapa guianensis) or Ecuador (Tabebuia chrysantha). Four multipurpose tree species presented the highest potential of conflict of use across the region: Dipteryx odorata, Tabebuia serratifolia, Hymenaea courbaril and Myroxylon balsamum yet these were not evenly distributed across all five countries. None of the five studied countries have specific legislation to promote sustainable use of any of the multipurpose species reported here and thus mitigate potential conflict of use; nor documented management options for integration or else segregation of both their

  17. Assessing the extent of "conflict of use" in multipurpose tropical forest trees: a regional view.

    PubMed

    Herrero-Jáuregui, Cristina; Guariguata, Manuel R; Cárdenas, Dairon; Vilanova, Emilio; Robles, Marco; Licona, Juan Carlos; Nalvarte, Walter

    2013-11-30

    In the context of multiple forest management, multipurpose tree species which provide both timber and non-timber forest products (NTFP), present particular challenges as the potential of conflicting use for either product may be high. One key aspect is that the magnitude of conflict of use can be location specific, thus adding complexity to policy development. This paper focuses on the extent to which the potential for conflict of use in multipurpose tree species varies across the Amazonian lowland forests shared by Peru, Bolivia, Colombia, Ecuador and Venezuela, emphasizing the economic dimension of conflict. Based on a review of the current normative and regulatory aspects of timber and NTFP extraction in the five countries, the paper also briefly discusses the opportunities and constraints for harmonization of timber and NTFP management of multipurpose species across the region. It was found that about half of the 336 timber species reviewed across the five countries also have non-timber uses. Eleven timber species are multipurpose in all five countries: Calophyllum brasiliense, Cedrela odorata, Ceiba pentandra, Clarisia racemosa, Ficus insipida, Jacaranda copaia, Schefflera morototoni, Simarouba amara and Terminalia amazonia. Seven other multipurpose species occurred only in either Venezuela (Tabebuia impetiginosa, Spondias mombin, Pentaclethra macroloba, Copaifera officinalis, Chlorophora tinctoria, Carapa guianensis) or Ecuador (Tabebuia chrysantha). Four multipurpose tree species presented the highest potential of conflict of use across the region: Dipteryx odorata, Tabebuia serratifolia, Hymenaea courbaril and Myroxylon balsamum yet these were not evenly distributed across all five countries. None of the five studied countries have specific legislation to promote sustainable use of any of the multipurpose species reported here and thus mitigate potential conflict of use; nor documented management options for integration or else segregation of both their

  18. Comparative evaluation of multi-purpose solutions in the stabilization of tear lysozyme.

    PubMed

    Barniak, Vicki L; Burke, Susan E; Venkatesh, Srini

    2010-12-01

    The range and extent of tear proteins removed by various multi-purpose solutions has been investigated, but there is little information in the literature about their ability to prevent denaturation of tear proteins, particularly lysozyme. The purpose of this study was to determine the ability of Bausch+Lomb Biotrue™ multi-purpose solution and other care solutions to affect denaturation of lysozyme using a lysozyme activity assay. The test solutions used were: Biotrue multi-purpose solution, Bausch+Lomb renu(®) fresh™, formerly ReNu MultiPlus(®), Alcon OPTI-FREE RepleniSH, Alcon OPTI-FREE EXPRESS, CIBA VISION AQuify, and AMO COMPLETE Multi-Purpose Solution Easy Rub Formula. A phosphate-buffered saline (PBS) solution served as a control. The test and control solutions containing lysozyme were exposed to sodium dodecyl sulfate (SDS), a known denaturant of the enzyme. The assay was based on digestion of the cell wall of Micrococcus luteus in a suspension, a substrate sensitive to active lysozyme. Enzymatic activity against M. luteus was used to assess activity of lysozyme. The decrease in the turbidity of the cell wall suspension, a measure of relative enzyme activity, was determined by following the decrease in absorbance (at 450nm) over time using a spectrophotometer. Statistically significant greater stabilization of lysozyme was observed with Biotrue multi-purpose solution and renu fresh than with OPTI-FREE RepleniSH, OPTI-FREE EXPRESS, AQuify, COMPLETE Multi-Purpose Solution Easy Rub Formula, and a PBS control. The lysozyme activity assay revealed that Biotrue multi-purpose solution and renu fresh have the ability to stabilize lysozyme under conditions that typically denature the protein.

  19. Targeted expression of the inositol 1,4,5-triphosphate receptor (IP3R) ligand-binding domain releases Ca2+ via endogenous IP3R channels.

    PubMed

    Várnai, Péter; Balla, András; Hunyady, László; Balla, Tamas

    2005-05-31

    Virtually all functions of a cell are influenced by cytoplasmic [Ca(2+)] increases. Inositol 1,4,5-trisphosphate receptor (IP(3)R) channels, located in the endoplasmic reticulum (ER), release Ca(2+) in response to binding of the second messenger, IP(3).IP(3)Rs thus are part of the information chain interpreting external signals and transforming them into cytoplasmic Ca(2+) transients. IP(3)Rs function as tetramers, each unit comprising an N-terminal ligand-binding domain (LBD) and a C-terminal channel domain linked by a long regulatory region. It is not yet understood how the binding of IP(3) to the LBD regulates the gating properties of the channel. Here, we use the expression of IP(3) binding protein domains tethered to the surface of the endoplasmic reticulum (ER) to show that the all-helical domain of the IP(3)R LBD is capable of depleting the ER Ca(2+) pools by opening the endogenous IP(3)Rs, even without IP(3) binding. This effect requires the domain to be within 50 A of the ER membrane and is impaired by the presence of the N-terminal inhibitory segment on the LBD. These findings raise the possibility that the helical domain of the LBD functions as an effector module possibly interacting with the channel domain, thereby being part of the gating mechanisms by which the IP(3)-induced conformational change within the LBD regulates Ca(2+) release.

  20. TGF-β regulates the proliferation of lung adenocarcinoma cells by inhibiting PIK3R3 expression.

    PubMed

    Wang, Guihua; Yang, Xi; Jin, Yuan; Deng, Yu; Luo, Xuelai; Hu, Junbo; Wang, Jing

    2015-06-01

    PIK3R3, an isoform of class IA phosphoinositide 3-kinase (PI3K), specifically interacts with cell proliferation regulators, such as retinoblastoma and proliferation cell nuclear antigen, to promote cell proliferation. However, the mechanisms behind the upstream signaling pathway of PIK3R3 remain unclear to date. This study showed that PIK3R3 expression was regulated by transforming growth factor-β (TGF-β) signaling and that PIK3R3 mediated the TGF-β-induced inhibition of lung adenocarcinoma cell proliferation. TGF-β down-regulated PIK3R3 expression in lung adenocarcinoma cells. However, this TGF-β-induced inhibition of cell proliferation can be attenuated by PIK3R3 overexpression. In addition, TGF-β can attenuate the transcriptional activity of NKX2.1, a transcription factor that binds to the promoter of PIK3R3. This result indicated that TGF-β regulated PIK3R3 expression by targeting NKX2.1. We confirmed the correlation between NKX2.1 and PIK3R3 in clinical samples. Therefore, the TGF-β/NKX2.1/PIK3R3 axis is crucial in the TGF-β-induced inhibition of cell proliferation, and the NKX2.1/PIK3R3 axis might become a target in TGF-β receptor-repressed lung adenocarcinoma.

  1. 32 CFR Appendix E to Part 623 - Surety Bond (DA Form 4881-3-R)

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 32 National Defense 3 2014-07-01 2014-07-01 false Surety Bond (DA Form 4881-3-R) E Appendix E to Part 623 National Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY SUPPLIES AND EQUIPMENT LOAN OF ARMY MATERIEL Pt. 623, App. E Appendix E to Part 623—Surety Bond (DA Form...

  2. 32 CFR Appendix E to Part 623 - Surety Bond (DA Form 4881-3-R)

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 32 National Defense 3 2013-07-01 2013-07-01 false Surety Bond (DA Form 4881-3-R) E Appendix E to Part 623 National Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY SUPPLIES AND EQUIPMENT LOAN OF ARMY MATERIEL Pt. 623, App. E Appendix E to Part 623—Surety Bond (DA Form...

  3. 32 CFR Appendix E to Part 623 - Surety Bond (DA Form 4881-3-R)

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 32 National Defense 3 2012-07-01 2009-07-01 true Surety Bond (DA Form 4881-3-R) E Appendix E to Part 623 National Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY SUPPLIES AND EQUIPMENT LOAN OF ARMY MATERIEL Pt. 623, App. E Appendix E to Part 623—Surety Bond (DA Form...

  4. Comparison of ICD-10 and DC: 0-3R Diagnoses in Infants, Toddlers and Preschoolers

    ERIC Educational Resources Information Center

    Equit, Monika; Paulus, Frank; Fuhrmann, Pia; Niemczyk, Justine; von Gontard, Alexander

    2011-01-01

    The purpose of this study was to analyze and compare diagnoses of patients from a special outpatient department for infants, toddlers and preschoolers. Specifically, overlap, age and gender differences according to the two classification systems DC: 0-3R and ICD-10 were examined. 299 consecutive children aged 0-5;11 years received both ICD-10 and…

  5. InsP3R, the calcium whisperer: Maintaining mitochondrial function in cancer.

    PubMed

    Lovy, Alenka; Foskett, J Kevin; Cárdenas, César

    2016-07-01

    Mitochondrial metabolism is essential to fulfill the large demand for macromolecule biosynthesis in cancer. We recently identified low-level InsP3R-mediated Ca(2+) transfer to mitochondria as an unexpected requirement for mitochondrial function. Here we reveal that its absence specifically targets cancer cells and causes necrosis at daughter cell separation during ongoing proliferation. PMID:27652328

  6. 32 CFR Appendix E to Part 623 - Surety Bond (DA Form 4881-3-R)

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 32 National Defense 3 2010-07-01 2010-07-01 true Surety Bond (DA Form 4881-3-R) E Appendix E to Part 623 National Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY SUPPLIES AND EQUIPMENT LOAN OF ARMY MATERIEL Pt. 623, App. E Appendix E to Part 623—Surety Bond (DA Form...

  7. 32 CFR Appendix E to Part 623 - Surety Bond (DA Form 4881-3-R)

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 32 National Defense 3 2011-07-01 2009-07-01 true Surety Bond (DA Form 4881-3-R) E Appendix E to Part 623 National Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY SUPPLIES AND EQUIPMENT LOAN OF ARMY MATERIEL Pt. 623, App. E Appendix E to Part 623—Surety Bond (DA Form...

  8. A Counterpart of the Wadati-Konno-Ichikawa Soliton Hierarchy Associated with so(3,R)

    NASA Astrophysics Data System (ADS)

    Ma, Wen-Xiu; Manukure, Solomon; Zheng, Hong-Chan

    2014-09-01

    A counterpart of the Wadati-Konno-Ichikawa (WKI) soliton hierarchy, associated with so(3;R), is presented through the zero curvature formulation. Its spectral matrix is defined by the same linear combination of basis vectors as the WKI one, and its Hamiltonian structures yielding Liouville integrability are furnished by the trace identity

  9. SOAR versus SQ3R: A Test of Two Study Systems

    ERIC Educational Resources Information Center

    Jairam, Dharma; Kiewra, Kenneth A.; Rogers-Kasson, Sarah; Patterson-Hazley, Melissa; Marxhausen, Kim

    2014-01-01

    Although researchers have long investigated ways to improve study habits and raise achievement, few studies compare study strategy systems with one another. No study to date has compared the long popular SQ3R (Survey, Question, Read, Recite, Review) system with the more modern SOAR (Select, Organize, Associate, Regulate) system. This study…

  10. A multipurpose reduced chemical-kinetic mechanism for methanol combustion

    NASA Astrophysics Data System (ADS)

    Fernández-Tarrazo, Eduardo; Sánchez-Sanz, Mario; Sánchez, Antonio L.; Williams, Forman A.

    2016-07-01

    A multipurpose reduced chemical-kinetic mechanism for methanol combustion comprising 8 overall reactions and 11 reacting chemical species is presented. The development starts by investigating the minimum set of elementary reactions needed to describe methanol combustion with reasonable accuracy over a range of conditions of temperature, pressure, and composition of interest in combustion. Starting from a 27-step mechanism that has been previously tested and found to give accurate predictions of ignition processes for these conditions, it is determined that the addition of 11 elementary reactions taken from its basis (San Diego) mechanism extends the validity of the description to premixed-flame propagation, strain-induced extinction of non-premixed flames, and equilibrium composition and temperatures, giving results that compare favourably with experimental measurements and also with computations using the 247-step detailed San Diego mechanism involving 50 reactive species. Specifically, premixed-flame propagation velocities and extinction strain rates for non-premixed counterflow flames calculated with the 38-step mechanism show departures from experimental measurements and detailed-chemistry computations that are roughly on the order of 10%, comparable with expected experimental uncertainties. Similar accuracy is found in comparisons of autoignition times over the range considered, except at very high temperatures, under which conditions the computations tend to overpredict induction times for all of the chemistry descriptions tested. From this 38-step mechanism, the simplification is continued by introducing steady-state approximations for the intermediate species CH3, CH4, HCO, CH3O, CH2OH, and O, leading to an 8-step reduced mechanism that provides satisfactory accuracy for all conditions tested. The flame computations indicate that thermal diffusion has a negligible influence on methanol combustion in all cases considered and that a mixture-average species

  11. Zeaxanthin ([3R,3'R]-beta, beta-carotene-3-3'diol) as a resonance Raman and visible absorption probe of membrane structure.

    PubMed Central

    Mendelsohn, R; Van Holten, R W

    1979-01-01

    When zeaxanthin ([3R,3R']-beta, beta-carotene-3,3'diol) is inserted into phospholipid dispersions and the latter heated through their gel-liquid crystal phase transitions, large changes are noted in the resonance Raman and absorption spectra of the carotenoid molecule. By analogy with the data of Carey and co-workers (J. Raman Spectrosc. 6:282) who studied the aggregation of zeaxanthin in acetone-water solutions, it is suggested that the carotenoid aggregates in the phospholipid gel state while forming a monomer in liquid crystal phases. The alterations in both the visible absorption and resonance Raman data have been used to monitor phospholipid phase behavior in dipalmitoylphosphatidylcholine and distearoylphosphatidylcholine, (DSPC) one-component systems and binary mixtures. The phase diagram obtained for the binary system, as constructed from visible absorption and resonance Raman data, is compared with that of Shimshick and McConnell (Biochemistry. 12:2351) obtained from electron spin resonance (ESR) studies. Although the agreement between absorption and ESR data is generally satisfactory, onset temperatures for phase separation at low DSPC mole fractions deduced from resonance Raman measurements are several degrees lower than those from the other methods. Nevertheless, the use of zeaxanthin as a resonance Raman and visible absorption probe behavior will be useful in some situations where ordinary Raman spectroscopic data cannot be obtained easily. The advantage of the resonance Raman approach is illustrated in a study of the phase behavior of a phospholipid extract of a cel- mutant of Neurospora crassa. A phase separation region is observed with onset and completion temperatures of -19 and -6 degrees C, respectively. PMID:162448

  12. 50 CFR 80.63 - Does an agency have to allocate costs in multipurpose projects and facilities?

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... RESTORATION PROGRAM ADMINISTRATIVE REQUIREMENTS, PITTMAN-ROBERTSON WILDLIFE RESTORATION AND DINGELL-JOHNSON SPORT FISH RESTORATION ACTS Allocation of Funds by an Agency § 80.63 Does an agency have to allocate... in multipurpose projects and facilities. A grant-funded project or facility is multipurpose if...

  13. 50 CFR 80.63 - Does an agency have to allocate costs in multipurpose projects and facilities?

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... RESTORATION PROGRAM ADMINISTRATIVE REQUIREMENTS, PITTMAN-ROBERTSON WILDLIFE RESTORATION AND DINGELL-JOHNSON SPORT FISH RESTORATION ACTS Allocation of Funds by an Agency § 80.63 Does an agency have to allocate... in multipurpose projects and facilities. A grant-funded project or facility is multipurpose if...

  14. 50 CFR 80.63 - Does an agency have to allocate costs in multipurpose projects and facilities?

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... RESTORATION PROGRAM ADMINISTRATIVE REQUIREMENTS, PITTMAN-ROBERTSON WILDLIFE RESTORATION AND DINGELL-JOHNSON SPORT FISH RESTORATION ACTS Allocation of Funds by an Agency § 80.63 Does an agency have to allocate... in multipurpose projects and facilities. A grant-funded project or facility is multipurpose if...

  15. 50 CFR 80.63 - Does an agency have to allocate costs in multipurpose projects and facilities?

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... RESTORATION PROGRAM ADMINISTRATIVE REQUIREMENTS, PITTMAN-ROBERTSON WILDLIFE RESTORATION AND DINGELL-JOHNSON SPORT FISH RESTORATION ACTS Allocation of Funds by an Agency § 80.63 Does an agency have to allocate... in multipurpose projects and facilities. A grant-funded project or facility is multipurpose if...

  16. Tear cytokine response to multipurpose solutions for contact lenses

    PubMed Central

    Kalsow, Carolyn M; Reindel, William T; Merchea, Mohinder M; Bateman, Kirk M; Barr, Joseph T

    2013-01-01

    Purpose An increased risk of corneal infiltrative events has been noted with the use of certain contact lenses and multipurpose solutions (MPS). This study was designed to evaluate tear cytokine assay as a sensitive, objective, and quantitative measure of the ocular surface response to contact lens/MPS and to consider the assay’s clinical relevance in the context of other measures of ocular surface response. Methods Two MPS, ReNu® Fresh™ (RNF) and Opti-Free® RepleniSH (OFR), were used with daily wear silicone hydrogel contact lenses in a randomized, prospective crossover study involving 26 subjects. Clinical data collection (conjunctival hyperemia, ocular surface sensitivity, solution induced corneal staining (SICS) test score, and subjective responses) and tear cytokine assays were conducted masked. Responses were tracked as change from baseline throughout the experimental schedule. Results Similar response patterns for several inflammatory cytokines were seen throughout both phases: subjects who received OFR in Phase I had mean tear concentrations that were generally higher than those of the RNF Phase I group. OFR Phase I subjects had significant (P < 0.01) increases over baseline at day 1 and/or following washout for 13 cytokines (cc chemokine ligands [CCL] 3, CCL5, CCL11, granulocyte-macrophage colony-stimulating factor [GM-CSF], interferon [INF]-γ, interleukin [IL]-2, IL-4, IL-5, IL-6, IL-13, IL-15, IL-17, tumor necrosis factor [TNF]-α). These changes were not observed in RNF Phase I subjects, even though SICS test scores increased. Phase I OFR subjects also had increased dryness, while RNF Phase I subjects had decreased bulbar hyperemia. No changes were detected with respect to limbal hyperemia or surface sensitivity thresholds. Conclusion The tear cytokine assay can detect and differentiate contact lens/MPS induced increases in inflammatory cytokines. Changes in cytokine levels were consistent with measurement of hyperemia and dryness but not with

  17. IP3R, store-operated Ca2+ entry and neuronal Ca2+ homoeostasis in Drosophila.

    PubMed

    Chakraborty, Sumita; Hasan, Gaiti

    2012-02-01

    The IP3R (inositol 1,4,5-trisphosphate receptor) releases Ca2+ from the ER (endoplasmic reticulum) store upon binding to its ligand InsP3, which is thought to be generated by activation of certain membrane-bound G-protein-coupled receptors in Drosophila. Depletion of Ca2+ in the ER store also activates SOCE (store-operated Ca2+ entry) from the extracellular milieu across the plasma membrane, leading to a second rise in cytosolic Ca2+, which is then pumped back into the ER. The role of the IP3R and SOCE in mediating Ca2+ homoeostasis in neurons, their requirement in neuronal function and effect on neuronal physiology and as a consequence behaviour, are reviewed in the present article.

  18. Validating Vegetable Production Unit (VPU) Plants, Protocols, Procedures and Requirements (P3R) using Currently Existing Flight Resources

    NASA Technical Reports Server (NTRS)

    Bingham, Gail; Bates, Scott; Bugbee, Bruce; Garland, Jay; Podolski, Igor; Levinskikh, Rita; Sychev, Vladimir; Gushin, Vadim

    2009-01-01

    Validating Vegetable Production Unit (VPU) Plants, Protocols, Procedures and Requirements (P3R) Using Currently Existing Flight Resources (Lada-VPU-P3R) is a study to advance the technology required for plant growth in microgravity and to research related food safety issues. Lada-VPU-P3R also investigates the non-nutritional value to the flight crew of developing plants on-orbit. The Lada-VPU-P3R uses the Lada hardware on the ISS and falls under a cooperative agreement between National Aeronautics and Space Administration (NASA) and the Russian Federal Space Association (FSA). Research Summary: Validating Vegetable Production Unit (VPU) Plants, Protocols, Procedures and Requirements (P3R) Using Currently Existing Flight Resources (Lada-VPU-P3R) will optimize hardware and

  19. Insulin resistance uncoupled from dyslipidemia due to C-terminal PIK3R1 mutations

    PubMed Central

    Huang-Doran, Isabel; Tomlinson, Patsy; Payne, Felicity; Gast, Alexandra; Sleigh, Alison; Bottomley, William; Harris, Julie; Daly, Allan; Rocha, Nuno; Rudge, Simon; Clark, Jonathan; Kwok, Albert; Romeo, Stefano; McCann, Emma; Müksch, Barbara; Dattani, Mehul; Zucchini, Stefano; Wakelam, Michael; Foukas, Lazaros C.; Savage, David B.; Murphy, Rinki; O’Rahilly, Stephen; Semple, Robert K.

    2016-01-01

    Obesity-related insulin resistance is associated with fatty liver, dyslipidemia, and low plasma adiponectin. Insulin resistance due to insulin receptor (INSR) dysfunction is associated with none of these, but when due to dysfunction of the downstream kinase AKT2 phenocopies obesity-related insulin resistance. We report 5 patients with SHORT syndrome and C-terminal mutations in PIK3R1, encoding the p85α/p55α/p50α subunits of PI3K, which act between INSR and AKT in insulin signaling. Four of 5 patients had extreme insulin resistance without dyslipidemia or hepatic steatosis. In 3 of these 4, plasma adiponectin was preserved, as in insulin receptor dysfunction. The fourth patient and her healthy mother had low plasma adiponectin associated with a potentially novel mutation, p.Asp231Ala, in adiponectin itself. Cells studied from one patient with the p.Tyr657X PIK3R1 mutation expressed abundant truncated PIK3R1 products and showed severely reduced insulin-stimulated association of mutant but not WT p85α with IRS1, but normal downstream signaling. In 3T3-L1 preadipocytes, mutant p85α overexpression attenuated insulin-induced AKT phosphorylation and adipocyte differentiation. Thus, PIK3R1 C-terminal mutations impair insulin signaling only in some cellular contexts and produce a subphenotype of insulin resistance resembling INSR dysfunction but unlike AKT2 dysfunction, implicating PI3K in the pathogenesis of key components of the metabolic syndrome. PMID:27766312

  20. Simultaneous all-optical 3R regeneration scheme with improved scalability using TOAD

    NASA Astrophysics Data System (ADS)

    Huang, Yue-Kai; Glesk, Ivan; Shankar, Raji; Prucnal, Paul R.

    2006-10-01

    A novel re-timing, re-amplifying, and re-shaping (3R) regeneration system is proposed to process multiple WDM (wavelengthdivision-multiplexing) channels simultaneously. Its re-timing capability is investigated by both simulation and experiment with polarizationscrambling method at 10 Gb/s bit rate. Jitter tolerance up to 0.8 UIpp is demonstrated with BER improvement and floor breaking ability.

  1. UTILITY ADVANCED TURBINE SYSTEMS (ATS) TECHNOLOGY READINESS TESTING PHASE 3 RESTRUCTURED (3R)

    SciTech Connect

    Unknown

    2000-03-17

    This scope document defines the work scope for accomplishing the design of the GE MS7001H and MS9001H (7H and 9H) combined-cycle power systems under the original ATS Phase 3 DOE Cooperative Agreement No. DE-FC21-95MC31176, and incorporates changes in scope required to convert Phase 3 to the ''restructured'' Phase 3R as defined in Amendment A012 to the Cooperative Agreement.

  2. [Characteristics of acid red 3R wastewater treatment by ozone microbubbles].

    PubMed

    Zhang, Jing; Du, Ya-Wei; Liu, Xiao-Jing; Zhou, Yu-Wen; Liu, Chun; Yang, Jing-Liang; Zhang, Lei

    2015-02-01

    The application of microbubble technology for ozonation wastewater treatment could enhance ozone mass transfer, improve ozonation performance and increase ozone utilization efficiency. The ozone microbubbles were used to treat synthetic acid red 3R wastewater in the present study, and compared to ozone conventional bubbles. The ozone mass transfer and ozonation characteristics of acid red 3R were investigated when ozone microbubbles and ozone conventional bubbles were applied. The results confirmed the enhanced ozone mass transfer using microbubbles. The ozone mass transfer coefficient using microbubbles was 3.6 times higher than that using conventional bubbles under the same conditions. Simultaneously, the ozone decomposition coefficient using microbubbles was 6.2 times higher than that using conventional bubbles, which would be favorable for *OH generation. The ozonation rate and mineralization efficiency of acid red 3R could be improved significantly using ozone microbubbles. A TOC removal efficiency of 78.0% was achieved using ozone microbubbles, which was about 2 times higher than that using ozone conventional bubbles. The ozone utilization efficiency using microbubbles was much higher that using conventional bubbles during ozonation treatment of acid red 3R. The average ozone utilization efficiencies were 97.8% and 69.3% when microbubbles and conventional bubbles were used, respectively. The oxidative ability of ozone microbubbles could be increased by enhancing *OH generation, and as a result, the oxidative reaction of degradation intermediates was accelerated by ozone microbubbles. Especially, the mineralization ability of small organic acid intermediates using ozone microbubbles was about 1.6 times higher than that using ozone conventional bubbles.

  3. A mini review on biological activities of pyridazinone derivatives as antiulcer, antisecretory, antihistamine and particularly against histamine H3R.

    PubMed

    Asif, Mohammad

    2015-01-01

    Pyridazinone derivatives and their related analoges were introduced for gastric antiulcer and antisecretory activities. Selected compounds were applied to ulcer models and showed their antiulcer and anti secretary activities. Some pyridazinone compounds are recently reported as H3R antagonists. Some amine analogs of pyridazinones, pyridazinone- phenethylamines and 4,5-fused pyridazinones showed histamine H3R antagonist activity with significant affinity for rat and human H3R. These pyridazinone analogs also showed excellent selectivity and metabolic stability, with adequate pharmacokinetics.

  4. Antiausterity activity of arctigenin enantiomers: importance of (2R,3R)-absolute configuration.

    PubMed

    Awale, Suresh; Kato, Mamoru; Dibwe, Dya Fita; Li, Feng; Miyoshi, Chika; Esumi, Hiroyasu; Kadota, Shigetoshi; Tezuka, Yasuhiro

    2014-01-01

    From a MeOH extract of powdered roots of Wikstroemia indica, six dibenzyl-gamma-butyrolactone-type lignans with (2S,3S)-absolute configuration [(+)-arctigenin (1), (+)-matairesinol (2), (+)-trachelogenin (3), (+)-nortrachelogenin (4), (+)-hinokinin (5), and (+)-kusunokinin (6)] were isolated, whereas three dibenzyl-gamma-butyrolactone-type lignans with (2R,3R)-absolute configuration [(-)-arctigenin (1*), (-)-matairesinol (2*), (-)-trachelogenin (3*)] were isolated from Trachelospermum asiaticum. The in vitro preferential cytotoxic activity of the nine compounds was evaluated against human pancreatic PANC-1 cancer cells in nutrient-deprived medium (NDM), but none of the six lignans (1-6) with (2S,3S)-absolute configuration showed preferential cytotoxicity. On the other hand, three lignans (1*-3*) with (2R,3R)-absolute configuration exhibited preferential cytotoxicity in a concentration-dependent manner with PC50 values of 0.54, 6.82, and 5.85 microM, respectively. Furthermore, the effect of (-)- and (+)-arctigenin was evaluated against the activation of Akt, which is a key process in the tolerance to nutrition starvation. Interestingly, only (-)-arctigenin (1*) strongly suppressed the activation of Akt. These results indicate that the (2R,3R)-absolute configuration of (-)-enantiomers should be required for the preferential cytotoxicity through the inhibition of Akt activation.

  5. Correlation between magnon and magnetic symmetries of hexagonal RMnO3 (R = Er, Ho, Lu)

    NASA Astrophysics Data System (ADS)

    Nguyen, Thi Minh Hien; Nguyen, Thi Huyen; Chen, Xiang-Bai; Park, Yeonju; Jung, Young Mee; Lee, D.; Noh, T. W.; Cheong, Sang-Wook; Yang, In-Sang

    2016-11-01

    The correlation between the magnon scattering and the magnetic symmetries of hexagonal RMnO3 (R = Er, Ho) thin films and LuMnO3 single crystal was studied through the 2D Correlation Spectroscopy (2D COS) and Perturbation-Correlation Moving Window 2D (PCMW2D) Correlation Spectroscopy which were performed on the temperature-dependent Raman spectra of RMnO3 (R = Er, Ho, Lu). From the Raman spectra, we observed much stronger intensity and more asymmetrical magnon peak in LuMnO3 single crystal than in ErMnO3 and HoMnO3 thin films. While the ratio between magnon and phonon's linewidth of LuMnO3 and HoMnO3 display an anomalous behavior, that ratio of ErMnO3 is almost stable. The result from PCMW2D also supports these results. In addition, our 2D COS analysis showed that there are more overlap peaks in broad four-spin flipping magnon peak in LuMnO3 than that in ErMnO3 and HoMnO3. The differences of hexagonal RMnO3 (R = Er, Ho, Lu) in magnon scattering are very similar to the actual differences of the magnetic symmetries of these compounds. Therefore, we suggest that the magnon scattering of hexagonal RMnO3 is strongly correlated with the magnetic symmetries of these materials.

  6. Two-Dimensional Valley Electrons and Excitons in Noncentrosymmetric 3 R -MoS2

    NASA Astrophysics Data System (ADS)

    Akashi, Ryosuke; Ochi, Masayuki; Bordács, Sándor; Suzuki, Ryuji; Tokura, Yoshinori; Iwasa, Yoshihiro; Arita, Ryotaro

    2015-07-01

    We find that the motion of the valley electrons—electronic states close to the K and K' points of the Brillouin zone—is confined into two dimensions when the layers of MoS2 form the 3 R stacking, while in the 2 H polytype, the bands have dispersion in all three dimensions. According to our first-principles band-structure calculations, the valley states have no interlayer hopping in 3 R -MoS2 , which is proven to be the consequence of the rotational symmetry of the Bloch functions. By measuring the reflectivity spectra and analyzing an anisotropic hydrogen-atom model, we confirm that the valley excitons in 3 R -MoS2 have two-dimensional hydrogenlike spectral series, and the spreads of the wave function are smaller than the interlayer distance. In contrast, the valley excitons in 2 H -MoS2 are well described by the three-dimensional model and, thus, not confined in a single layer. Our results indicate that the dimensionality of the valley degree of freedom can be controlled simply by the stacking geometry, which can be utilized in future valleytronics.

  7. Two dimensional valley electrons and excitons in the noncentrosymmetric 3R MoS2

    NASA Astrophysics Data System (ADS)

    Akashi, Ryosuke; Ochi, Masayuki; Bordacs, Sandor; Suzuki, Ryuji; Tokura, Yoshinori; Iwasa, Yoshihiro; Arita, Ryotaro

    2015-03-01

    Possible control of the valley-dependent spin polarization in transition-metal dichalcogenides has been a hot topic as the valleytronics. Through the recent great progress based on the monolayer systems, people's interest is shifting to multilayered polytypes. The centrosymmetric 2H-stacked systems have been much studied for switching of the valley-dependent spin polarization. On the other hand, some of the authors [Suzuki et al., Nat. Nanotechnol. 9, 611 (2014)] have successfully fabricated the noncentrosymmetric 3R-stacked MoS2 multilayer and demonstrated the valley polarization independent of the number of layers. On the basis of this success, we further examined the valley electronic states in the 3R-MoS2 and found their novel two-dimensional properties utilizable for the valleytronics [Akashi et al., submitted.]. Namely, interlayer hopping of the valley electrons was proved to be zero as a consequence of a quantum-interference effect caused by the 3R-stacking geometry. In the talk, we report the results of the reflectivity measurement and analysis with an anisotropic hydrogen atomic model and show that the zero hopping causes 2D-hydrogen-like spectral series and confinement of the wave function within a single layer of the valley exciton. Present address: The University of Tokyo.

  8. Antiausterity activity of arctigenin enantiomers: importance of (2R,3R)-absolute configuration.

    PubMed

    Awale, Suresh; Kato, Mamoru; Dibwe, Dya Fita; Li, Feng; Miyoshi, Chika; Esumi, Hiroyasu; Kadota, Shigetoshi; Tezuka, Yasuhiro

    2014-01-01

    From a MeOH extract of powdered roots of Wikstroemia indica, six dibenzyl-gamma-butyrolactone-type lignans with (2S,3S)-absolute configuration [(+)-arctigenin (1), (+)-matairesinol (2), (+)-trachelogenin (3), (+)-nortrachelogenin (4), (+)-hinokinin (5), and (+)-kusunokinin (6)] were isolated, whereas three dibenzyl-gamma-butyrolactone-type lignans with (2R,3R)-absolute configuration [(-)-arctigenin (1*), (-)-matairesinol (2*), (-)-trachelogenin (3*)] were isolated from Trachelospermum asiaticum. The in vitro preferential cytotoxic activity of the nine compounds was evaluated against human pancreatic PANC-1 cancer cells in nutrient-deprived medium (NDM), but none of the six lignans (1-6) with (2S,3S)-absolute configuration showed preferential cytotoxicity. On the other hand, three lignans (1*-3*) with (2R,3R)-absolute configuration exhibited preferential cytotoxicity in a concentration-dependent manner with PC50 values of 0.54, 6.82, and 5.85 microM, respectively. Furthermore, the effect of (-)- and (+)-arctigenin was evaluated against the activation of Akt, which is a key process in the tolerance to nutrition starvation. Interestingly, only (-)-arctigenin (1*) strongly suppressed the activation of Akt. These results indicate that the (2R,3R)-absolute configuration of (-)-enantiomers should be required for the preferential cytotoxicity through the inhibition of Akt activation. PMID:24660468

  9. Shared functional defect in IP3R-mediated calcium signaling in diverse monogenic autism syndromes

    PubMed Central

    Schmunk, G; Boubion, B J; Smith, I F; Parker, I; Gargus, J J

    2015-01-01

    Autism spectrum disorder (ASD) affects 2% of children, and is characterized by impaired social and communication skills together with repetitive, stereotypic behavior. The pathophysiology of ASD is complex due to genetic and environmental heterogeneity, complicating the development of therapies and making diagnosis challenging. Growing genetic evidence supports a role of disrupted Ca2+ signaling in ASD. Here, we report that patient-derived fibroblasts from three monogenic models of ASD—fragile X and tuberous sclerosis TSC1 and TSC2 syndromes—display depressed Ca2+ release through inositol trisphosphate receptors (IP3Rs). This was apparent in Ca2+ signals evoked by G protein-coupled receptors and by photoreleased IP3 at the levels of both global and local elementary Ca2+ events, suggesting fundamental defects in IP3R channel activity in ASD. Given the ubiquitous involvement of IP3R-mediated Ca2+ signaling in neuronal excitability, synaptic plasticity, gene expression and neurodevelopment, we propose dysregulated IP3R signaling as a nexus where genes altered in ASD converge to exert their deleterious effect. These findings highlight potential pharmaceutical targets, and identify Ca2+ screening in skin fibroblasts as a promising technique for early detection of individuals susceptible to ASD. PMID:26393489

  10. 50 CFR 80.64 - How does an agency allocate costs in multipurpose projects and facilities?

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... RESTORATION PROGRAM ADMINISTRATIVE REQUIREMENTS, PITTMAN-ROBERTSON WILDLIFE RESTORATION AND DINGELL-JOHNSON SPORT FISH RESTORATION ACTS Allocation of Funds by an Agency § 80.64 How does an agency allocate costs... project or facility. The agency must describe the method used to allocate costs in multipurpose...

  11. 50 CFR 80.64 - How does an agency allocate costs in multipurpose projects and facilities?

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... RESTORATION PROGRAM ADMINISTRATIVE REQUIREMENTS, PITTMAN-ROBERTSON WILDLIFE RESTORATION AND DINGELL-JOHNSON SPORT FISH RESTORATION ACTS Allocation of Funds by an Agency § 80.64 How does an agency allocate costs... project or facility. The agency must describe the method used to allocate costs in multipurpose...

  12. 50 CFR 80.64 - How does an agency allocate costs in multipurpose projects and facilities?

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... RESTORATION PROGRAM ADMINISTRATIVE REQUIREMENTS, PITTMAN-ROBERTSON WILDLIFE RESTORATION AND DINGELL-JOHNSON SPORT FISH RESTORATION ACTS Allocation of Funds by an Agency § 80.64 How does an agency allocate costs... project or facility. The agency must describe the method used to allocate costs in multipurpose...

  13. 50 CFR 80.64 - How does an agency allocate costs in multipurpose projects and facilities?

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... RESTORATION PROGRAM ADMINISTRATIVE REQUIREMENTS, PITTMAN-ROBERTSON WILDLIFE RESTORATION AND DINGELL-JOHNSON SPORT FISH RESTORATION ACTS Allocation of Funds by an Agency § 80.64 How does an agency allocate costs... project or facility. The agency must describe the method used to allocate costs in multipurpose...

  14. APPLICATION OF A MULTIPURPOSE UNEQUAL-PROBABILITY STREAM SURVEY IN THE MID-ATLANTIC COASTAL PLAIN

    EPA Science Inventory

    A stratified random sample with unequal-probability selection was used to design a multipurpose survey of headwater streams in the Mid-Atlantic Coastal Plain. Objectives for data from the survey include unbiased estimates of regional stream conditions, and adequate coverage of un...

  15. Breeding status of tung tree (Vernicia sp.) in China, a multipurpose oilseed crop with industrial uses

    Technology Transfer Automated Retrieval System (TEKTRAN)

    As a developing country with the world’s largest population, China faces a serious challenge in satisfying its continuously increasing energy demands. Tung trees (Vernicia sp., especially V. fordii and V. montana), are multipurpose, perennial plants belonging to the Euphorbiaceae family. The unique ...

  16. Effectiveness of Multipurpose Unit Early Classroom Intervention Program for 4-5-Year-Old Children

    ERIC Educational Resources Information Center

    Celebioglu Morkoc, Ozlem; Aktan Acar, Ebru

    2014-01-01

    This research examined the effectiveness of Multipurpose Unit Early Classroom Intervention Program (MUECIP) prepared for 4-5-year-old (48-60 months) children whose development is at risk because of their families' socioeconomic conditions. The research adopted a preliminary test-final test control group trial model. The research participants…

  17. Multipurpose panel, phase 1, study report. [display utilizing multiplexing and digital techniques

    NASA Technical Reports Server (NTRS)

    Parkin, W.

    1975-01-01

    The feasibility of a multipurpose panel which provides a programmable electronic display for changeable panel nomenclature, multiplexes similar indicator display signals to the signal display, and demultiplexes command signals is examined. Topics discussed include: electronic display technology, miniaturized electronic and memory devices, and data management systems which employ digital address and multiplexing.

  18. 77 FR 38766 - Proposed Information Collection; Comment Request; International Client Life-Cycle Multi-Purpose...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-06-29

    ... comprehensive information collection will cover all aspects of an international organization's life-cycle with... International Client Life-cycle Multi-Purpose Forms, previously titled Export Assistance Center Internet Web... inclusive and flexible client life-cycle information collection. The proposed categories of questions...

  19. Multipurpose electric furnace system. [for use in Apollo-Soyuz Test Program

    NASA Technical Reports Server (NTRS)

    Mazelsky, R.; Duncan, C. S.; Seidensticker, R. G.; Johnson, R. A.; Mchugh, J. P.; Foust, H. C.; Piotrowski, P. A.

    1974-01-01

    A multipurpose electric furnace system of advanced design for space applications was developed and tested. This system is intended for use in the Apollo-Soyuz Test Program. It consists of the furnace, control package and a helium package for rapid cooldown.

  20. MFOX-Technology, transceiver design and performance. [Multipurpose Fiber Optic Transceiver

    NASA Technical Reports Server (NTRS)

    Channin, Donald J.

    1987-01-01

    The multipurpose fiber optic transceiver (MFOX) family of fiber-optic transceivers will provide standard, military-qualified off-the-shelf transmitters and receivers for ground-based tactical fiber-optic communications. The author describes these units and their capabilities for diverse military applications.

  1. Engineering a Multi-Purpose Test Collection for Web Retrieval Experiments.

    ERIC Educational Resources Information Center

    Bailey, Peter; Craswell, Nick; Hawking, David

    2003-01-01

    Describes a test collection that was developed as a multi-purpose testbed for experiments on the Web in distributed information retrieval, hyperlink algorithms, and conventional ad hoc retrieval. Discusses inter-server connectivity, integrity of server holdings, inclusion of documents related to a wide spread of likely queries, and distribution of…

  2. Evaluation of the North Carolina Multi-Purpose Occupational Information System.

    ERIC Educational Resources Information Center

    Jurado, Eugene A.; Wolff, Warren W.

    A study assessed North Carolina's Multi-Purpose Occupational Information System (MPOIS). Evaluated during the study were various dimensions of the MPOIS, including its content, efficiency, operations, training, and outcomes. In addition, the development of the system was examined in terms of how it addresses both the technical and non-technical…

  3. The Multi-Purpose Center for Curriculum Improvement. End of Project Report.

    ERIC Educational Resources Information Center

    Puzzuoli, David A.; Wholley, Peter J.

    The report for the 8-county West Virginia Multi-Purpose Center for Curriculum Improvement, funded under Title III of the Elementary and Secondary Education Act, represents a comprehensive evaluation of the numerous activities with which the center was involved. The first section of the document presents general characteristics of the project area,…

  4. Multipurpose Pressure Vessel Scanner and Photon Doppler Velocimetry

    NASA Technical Reports Server (NTRS)

    Ellis, Tayera

    2015-01-01

    Critical flight hardware typically undergoes a series of nondestructive evaluation methods to screen for defects before it is integrated into the flight system. Conventionally, pressure vessels have been inspected for flaws using a technique known as fluorescent dye penetrant, which is biased to inspector interpretation. An alternate method known as eddy current is automated and can detect small cracks better than dye penetrant. A new multipurpose pressure vessel scanner has been developed to perform internal and external eddy current scanning, laser profilometry, and thickness mapping on pressure vessels. Before this system can be implemented throughout industry, a probability of detection (POD) study needs to be performed to validate the system's eddy current crack/flaw capabilities. The POD sample set will consist of 6 flight-like metal pressure vessel liners with defects of known size. Preparation for the POD includes sample set fabrication, system operation, procedure development, and eddy current settings optimization. For this, collaborating with subject matter experts was required. This technical paper details the preparation activities leading up to the POD study currently scheduled for winter 2015/2016. Once validated, this system will be a proven innovation for increasing the safety and reliability of necessary flight hardware. Additionally, testing of frangible joint requires Photon Doppler Velocimetry (PDV) and Digital Image Correlation instrumentation. There is often noise associated with PDV data, which necessitates a frequency modulation (FM) signal-to-noise pre-test. Generally, FM radio works by varying the carrier frequency and mixing it with a fixed frequency source, creating a beat frequency which is represented by audio frequency that can be heard between about 20 to 20,000 Hz. Similarly, PDV reflects a shifted frequency (a phenomenon known as the Doppler Effect) from a moving source and mixes it with a fixed source frequency, which results in

  5. Multipurpose Pressure Vessel Scanner and Photon Doppler Velocimetry

    NASA Technical Reports Server (NTRS)

    Ellis, Tayera

    2015-01-01

    Critical flight hardware typically undergoes a series of nondestructive evaluation methods to screen for defects before it is integrated into the flight system. Conventionally, pressure vessels have been inspected for flaws using a technique known as fluorescent dye penetrant, which is biased to inspector interpretation. An alternate method known as eddy current is automated and can detect small cracks better than dye penetrant. A new multipurpose pressure vessel scanner has been developed to perform internal and external eddy current scanning, laser profilometry, and thickness mapping on pressure vessels. Before this system can be implemented throughout industry, a probability of detection (POD) study needs to be performed to validate the system’s eddy current crack/flaw capabilities. The POD sample set will consist of 6 flight-like metal pressure vessel liners with defects of known size. Preparation for the POD includes sample set fabrication, system operation, procedure development, and eddy current settings optimization. For this, collaborating with subject matter experts was required. This technical paper details the preparation activities leading up to the POD study currently scheduled for winter 2015/2016. Once validated, this system will be a proven innovation for increasing the safety and reliability of necessary flight hardware.Additionally, testing of frangible joint requires Photon Doppler Velocimetry (PDV) and Digital Image Correlation instrumentation. There is often noise associated with PDV data, which necessitates a frequency modulation (FM) signal-to-noise pre-test. Generally, FM radio works by varying the carrier frequency and mixing it with a fixed frequency source, creating a beat frequency which is represented by audio frequency that can be heard between about 20 to 20,000 Hz. Similarly, PDV reflects a shifted frequency (a phenomenon known as the Doppler Effect) from a moving source and mixes it with a fixed source frequency, which results in

  6. Callyazepin and (3R)-Methylazacyclodecane, Nitrogenous Macrocycles from a Callyspongia sp. Sponge.

    PubMed

    Kim, Chang-Kwon; Woo, Jung-Kyun; Lee, Yeon-Ju; Lee, Hyi-Seung; Sim, Chung J; Oh, Dong-Chan; Oh, Ki-Bong; Shin, Jongheon

    2016-04-22

    Callyazepin (1) and (3R)-methylazacyclodecane (2), nitrogenous macrocycles, were isolated from a tropical Callyspongia sp. sponge. The combined spectroscopic analyses revealed that the structure of 1 is a bicyclic azepane ammonium salt of a novel structural class derived from mixed biogenetic origins. The configuration of the whole molecule and the conformation of the formamide group were assigned by proton-proton coupling constants, a NOESY analysis, and the application of the phenylglycine methyl ester method. The structure of 2 was identified using combined spectroscopic analyses and ECD measurements. These compounds exhibited moderate cytotoxic activities against the K562 and A549 cell lines. PMID:27015002

  7. Density functional theory study of 3R- and 2H-CuAlO2 under pressure

    NASA Astrophysics Data System (ADS)

    Liu, Qi-Jun; Liu, Zheng-Tang; Feng, Li-Ping; Tian, Hao; Liu, Wen-Ting; Yan, Feng

    2010-10-01

    We present a first-principles density-functional theory based study of the impact of pressure on the structural and elastic properties of bulk 3R- and 2H-CuAlO2. The ground state properties of 3R- and 2H-CuAlO2 are obtained, which are in good agreement with previous experimental and theoretical data. The analysis of enthalpy variation with pressure indicates the phase transition pressure between 3R and 2H is 15.4 GPa. The independent elastic constants of 3R- and 2H-CuAlO2 are calculated. As the applied pressure increases, the calculations show the presences of mechanical instability at 26.2 and 27.8 GPa for 3R- and 2H-CuAlO2, which are possibly related with the phase transitions.

  8. Oak Ridge National Laboratory Review: Volume 24, No. 2, 1991

    SciTech Connect

    Krause, C.

    1991-01-01

    The Oak Ridge National Laboratory (ORNL) is a multiprogram, multipurpose laboratory that conducts research in the physical, chemical, and life sciences; in fusion, fission, and fossil energy; and in energy conservation and other energy-related technologies. This review outlines some current endeavors of the lab. A state of the laboratory presentation is given by director, Alvin Trivelpiece. Research of single crystals for welding is described. The Science Alliance, a partnership between ORNL and the University of Tennessee, is chronicled. And several incites into distinguished personnel at the laboratory are given. (GHH)

  9. Oak Ridge National Laboratory Review: Volume 24, No. 2, 1991

    SciTech Connect

    Krause, C.

    1991-12-31

    The Oak Ridge National Laboratory (ORNL) is a multiprogram, multipurpose laboratory that conducts research in the physical, chemical, and life sciences; in fusion, fission, and fossil energy; and in energy conservation and other energy-related technologies. This review outlines some current endeavors of the lab. A state of the laboratory presentation is given by director, Alvin Trivelpiece. Research of single crystals for welding is described. The Science Alliance, a partnership between ORNL and the University of Tennessee, is chronicled. And several incites into distinguished personnel at the laboratory are given. (GHH)

  10. Mutations in MYB3R1 and MYB3R4 cause pleiotropic developmental defects and preferential down-regulation of multiple G2/M-specific genes in Arabidopsis.

    PubMed

    Haga, Nozomi; Kobayashi, Kosuke; Suzuki, Takamasa; Maeo, Kenichiro; Kubo, Minoru; Ohtani, Misato; Mitsuda, Nobutaka; Demura, Taku; Nakamura, Kenzo; Jürgens, Gerd; Ito, Masaki

    2011-10-01

    R1R2R3-Myb proteins represent an evolutionarily conserved class of Myb family proteins important for cell cycle regulation and differentiation in eukaryotic cells. In plants, this class of Myb proteins are believed to regulate the transcription of G2/M phase-specific genes by binding to common cis-elements, called mitosis-specific activator (MSA) elements. In Arabidopsis (Arabidopsis thaliana), MYB3R1 and MYB3R4 act as transcriptional activators and positively regulate cytokinesis by activating the transcription of KNOLLE, which encodes a cytokinesis-specific syntaxin. Here, we show that the double mutation myb3r1 myb3r4 causes pleiotropic developmental defects, some of which are due to deficiency of KNOLLE whereas other are not, suggesting that multiple target genes are involved. Consistently, microarray analysis of the double mutant revealed altered expression of many genes, among which G2/M-specific genes showed significant overrepresentation of the MSA motif and a strong tendency to be down-regulated by the double mutation. Our results demonstrate, on a genome-wide level, the importance of the MYB3R-MSA pathway for regulating G2/M-specific transcription. In addition, MYB3R1 and MYB3R4 may have diverse roles during plant development by regulating G2/M-specific genes with various functions as well as genes possibly unrelated to the cell cycle.

  11. Highly Selective Dopamine D3 Receptor (D3R) Antagonists and Partial Agonists Based on Eticlopride and the D3R Crystal Structure: New Leads for Opioid Dependence Treatment.

    PubMed

    Kumar, Vivek; Bonifazi, Alessandro; Ellenberger, Michael P; Keck, Thomas M; Pommier, Elie; Rais, Rana; Slusher, Barbara S; Gardner, Eliot; You, Zhi-Bing; Xi, Zheng-Xiong; Newman, Amy Hauck

    2016-08-25

    The recent and precipitous increase in opioid analgesic abuse and overdose has inspired investigation of the dopamine D3 receptor (D3R) as a target for therapeutic intervention. Metabolic instability or predicted toxicity has precluded successful translation of previously reported D3R-selective antagonists to clinical use for cocaine abuse. Herein, we report a series of novel and D3R crystal structure-guided 4-phenylpiperazines with exceptionally high D3R affinities and/or selectivities with varying efficacies. Lead compound 19 was selected based on its in vitro profile: D3R Ki = 6.84 nM, 1700-fold D3R versus D2R binding selectivity, and its metabolic stability in mouse microsomes. Compound 19 inhibited oxycodone-induced hyperlocomotion in mice and reduced oxycodone-induced locomotor sensitization. In addition, pretreatment with 19 also dose-dependently inhibited the acquisition of oxycodone-induced conditioned place preference (CPP) in rats. These findings support the D3R as a target for opioid dependence treatment and compound 19 as a new lead molecule for development. PMID:27508895

  12. Naphthalene Planar Laser-Induced Fluorescence Imaging of Orion Multi-Purpose Crew Vehicle Heat Shield Ablation Products

    NASA Astrophysics Data System (ADS)

    Combs, Christopher S.; Clemens, Noel T.; Danehy, Paul M.

    2013-11-01

    The Orion Multi-Purpose Crew Vehicle (MPCV) calls for an ablative heat shield. In order to better design this heat shield and others that will undergo planetary entry, an improved understanding of the ablation process is required. Given that ablation is a multi-physics process involving heat and mass transfer, codes aiming to predict heat shield ablation are in need of experimental data pertaining to the turbulent transport of ablation products for validation. At The University of Texas at Austin, a technique is being developed that uses planar laser-induced fluorescence (PLIF) of a low-temperature sublimating ablator (naphthalene) to visualize the transport of ablation products in a supersonic flow. Since ablation at reentry temperatures can be difficult to recreate in a laboratory setting it is desirable to create a limited physics problem and simulate the ablation process at relatively low temperature conditions using naphthalene. A scaled Orion MPCV model with a solid naphthalene heat shield has been tested in a Mach 5 wind tunnel at various angles of attack in the current work. PLIF images have shown high concentrations of scalar in the capsule wake region, intermittent turbulent structures on the heat shield surface, and interesting details of the capsule shear layer structure. This work was supported by a NASA Office of the Chief Technologist's Space Technology Research Fellowship (NNX11AN55H).

  13. Nonclinical safety evaluation of boric acid and a novel borate-buffered contact lens multi-purpose solution, Biotrue™ multi-purpose solution.

    PubMed

    Lehmann, David M; Cavet, Megan E; Richardson, Mary E

    2010-12-01

    Multipurpose solutions (MPS) often contain low concentrations of boric acid as a buffering agent. Limited published literature has suggested that boric acid and borate-buffered MPS may alter the corneal epithelium; an effect attributed to cytotoxicity induced by boric acid. However, this claim has not been substantiated. We investigated the effect of treating cells with relevant concentrations of boric acid using two cytotoxicity assays, and also assessed the impact of boric acid on corneal epithelial barrier function by measuring TEER and immunostaining for tight junction protein ZO-1 in human corneal epithelial cells. Boric acid was also assessed in an in vivo ocular model when administered for 28 days. Additionally, we evaluated Biotrue multi-purpose solution, a novel borate-buffered MPS, alone and with contact lenses for ocular compatibility in vitro and in vivo. Boric acid passed both cytotoxicity assays and did not alter ZO-1 distribution or corneal TEER. Furthermore, boric acid was well-tolerated on-eye following repeated administration in a rabbit model. Finally, Biotrue multi-purpose solution demonstrated good ocular biocompatibility both in vitro and in vivo. This MPS was not cytotoxic and was compatible with the eye when administered alone and when evaluated with contact lenses. We demonstrate that boric acid and a borate-buffered MPS is compatible with the ocular environment. Our findings provide evidence that ocular effects reported for some borate-buffered MPS may be incorrectly attributed to boric acid and are more likely a function of the unique combination of ingredients in the MPS formulation tested.

  14. Effect of IP3R3 and NPY on age-related declines in olfactory stem cell proliferation.

    PubMed

    Jia, Cuihong; Hegg, Colleen C

    2015-02-01

    Losing the sense of smell because of aging compromises health and quality of life. In the mouse olfactory epithelium, aging reduces the capacity for tissue homeostasis and regeneration. The microvillous cell subtype that expresses both inositol trisphosphate receptor type 3 (IP3R3) and the neuroproliferative factor neuropeptide Y (NPY) is critical for regulation of homeostasis, yet its role in aging is undefined. We hypothesized that an age-related decline in IP3R3 expression and NPY signaling underlie age-related homeostatic changes and olfactory dysfunction. We found a decrease in IP3R3(+) and NPY(+) microvillous cell numbers and NPY protein and a reduced sensitivity to NPY-mediated proliferation over 24 months. However, in IP3R3-deficient mice, there was no further age-related reduction in cell numbers, proliferation, or olfactory function compared with wild type. The proliferative response was impaired in aged IP3R3-deficient mice when injury was caused by satratoxin G, which induces IP3R3-mediated NPY release, but not by bulbectomy, which does not evoke NPY release. These data identify IP3R3 and NPY signaling as targets for improving recovery following olfactotoxicant exposure.

  15. Sterilization validation for medical compresses at IRASM multipurpose irradiation facility

    NASA Astrophysics Data System (ADS)

    Alexandru, Mioara; Ene, Mihaela

    2007-08-01

    In Romania, IRASM Radiation Processing Center is the unique supplier of radiation sterilization services—industrial scale (ISO 9001:2000 and ISO 13485:2003 certified). Its Laboratory of Microbiological Testing is the sole third party competent laboratory (GLPractice License, ISO 17025 certification in progress) for pharmaceutics and medical devices as well. We here refer to medical compresses as a distinct category of sterile products, made from different kind of hydrophilic materials (cotton, non-woven, polyurethane foam) with or without an impregnated ointment base (paraffin, plant extracts). These products are included in the class of medical devices, but for the sterilization validation, from microbiological point of view, there are important differences in testing method compared to the common medical devices (syringes, catheters, etc). In this paper, we present some results and practical solutions chosen to perform a sterilization validation, compliant with ISO 11137: 2006.

  16. Site-directed Mutagenesis Reveals Regions Implicated in the Stability and Fiber Formation of Human λ3r Light Chains*

    PubMed Central

    Villalba, Miryam I.; Canul-Tec, Juan C.; Luna-Martínez, Oscar D.; Sánchez-Alcalá, Rosalba; Olamendi-Portugal, Timoteo; Rudiño-Piñera, Enrique; Rojas, Sonia; Sánchez-López, Rosana; Fernández-Velasco, Daniel A.; Becerril, Baltazar

    2015-01-01

    Light chain amyloidosis (AL) is a disease that affects vital organs by the fibrillar aggregation of monoclonal light chains. λ3r germ line is significantly implicated in this disease. In this work, we contrasted the thermodynamic stability and aggregation propensity of 3mJL2 (nonamyloidogenic) and 3rJL2 (amyloidogenic) λ3 germ lines. Because of an inherent limitation (extremely low expression), Cys at position 34 of the 3r germ line was replaced by Tyr reaching a good expression yield. A second substitution (W91A) was introduced in 3r to obtain a better template to incorporate additional mutations. Although the single mutant (C34Y) was not fibrillogenic, the second mutation located at CDR3 (W91A) induced fibrillogenesis. We propose, for the first time, that CDR3 (position 91) affects the stability and fiber formation of human λ3r light chains. Using the double mutant (3rJL2/YA) as template, other variants were constructed to evaluate the importance of those substitutions into the stability and aggregation propensity of λ3 light chains. A change in position 7 (P7D) boosted 3rJL2/YA fibrillogenic properties. Modification of position 48 (I48M) partially reverted 3rJL2/YA fibril aggregation. Finally, changes at positions 8 (P8S) or 40 (P40S) completely reverted fibril formation. These results confirm the influential roles of N-terminal region (positions 7 and 8) and the loop 40–60 (positions 40 and 48) on AL. X-ray crystallography revealed that the three-dimensional topology of the single and double λ3r mutants was not significantly altered. This mutagenic approach helped to identify key regions implicated in λ3 AL. PMID:25505244

  17. The ACTN3 R577X Polymorphism Is Associated with Cardiometabolic Fitness in Healthy Young Adults

    PubMed Central

    Deschamps, Chelsea L.; Connors, Kimberly E.; Klein, Matthias S.; Johnsen, Virginia L.; Shearer, Jane; Vogel, Hans J.; Devaney, Joseph M.; Gordish-Dressman, Heather; Many, Gina M.; Barfield, Whitney; Hoffman, Eric P.; Kraus, William E.; Hittel, Dustin S.

    2015-01-01

    Homozygosity for a premature stop codon (X) in the ACTN3 “sprinter” gene is common in humans despite the fact that it reduces muscle size, strength and power. Because of the close relationship between skeletal muscle function and cardiometabolic health we examined the influence of ACTN3 R577X polymorphism over cardiovascular and metabolic characteristics of young adults (n = 98 males, n = 102 females; 23 ± 4.2 years) from our Assessing Inherent Markers for Metabolic syndrome in the Young (AIMMY) study. Both males and females with the RR vs XX genotype achieved higher mean VO2 peak scores (47.8 ± 1.5 vs 43.2 ±1.8 ml/O2/min, p = 0.002) and exhibited higher resting systolic (115 ± 2 vs 105 ± mmHg, p = 0.027) and diastolic (69 ± 3 vs 59 ± 3 mmHg, p = 0.005) blood pressure suggesting a role for ACTN3 in the maintenance of vascular tone. We subsequently identified the expression of alpha-actinin 3 protein in pulmonary artery smooth muscle, which may explain the genotype-specific differences in cardiovascular adaptation to acute exercise. In addition, we utilized targeted serum metabolomics to distinguish between RR and XX genotypes, suggesting an additional role for the ACTN3 R577X polymorphism in human metabolism. Taken together, these results identify significant cardiometabolic effects associated with possessing one or more functional copies of the ACTN3 gene. PMID:26107372

  18. Phase transformation behavior in a multipurpose dental casting gold alloy during continuous heating.

    PubMed

    Kim, H I; Seol, H J; Hisatsune, K; Htain-Winn; Sakrana, A A; Takuma, Y; Kawasaki, K

    2000-01-01

    Phase transformation in a multipurpose dental casting gold alloy during continuous heating was studied by electrical resistivity measurements, hardness tests, X-ray diffraction and scanning and transmission electron microscopy. The behavior can be explained by the following reaction sequences in the nodule: alpha1(fcc) + alpha2(L1(2)) --> alpha1(fcc) + alpha2(L1(2)) + beta(L1(0)), where fcc is face centred cubic. A discontinuous precipitation with very fine nodules contributed to the hardening and the growth produced the softening. This multipurpose gold alloy is characterized by the introduction of a PtZn ordered phase with L1(0) structure instead of a CuAu I phase.

  19. Disinfecting action of a new multi-purpose disinfection solution for contact lenses.

    PubMed

    Rosenthal, R A; Bell, W M; Abshire, R

    1999-01-01

    The disinfection activity of a new multipurpose disinfection solution (OPTI-FREE Express with ALDOX) was compared to several other contact lens disinfecting solutions. The new solution is preserved with polyquaternium-1 and myristamidopropyl dimethylamine. The other solutions included 3% hydrogen peroxide systems and multipurpose solutions (MPS) preserved with polyhexamethylene biguanide. The products were tested for antimicrobial activity against Staphylococcus spp., Pseudomonas aeruginosa, Serratia marcescens, Candida albicans, Fusarium solani, and Aspergillus fumigatus. OPTI-FREE Express provided a broader range of antimicrobial activity than the MPS. It provided activity similar to that demonstrated by 3% hydrogen peroxide systems, but unlike the hydrogen peroxide system tested, it also prevented re growth of the organisms during extended storage. PMID:16303414

  20. Zone Management of Multi-Purpose Use of Groundwater Via Spatial Variability Analysis of Water Quality and Hydrogeology

    NASA Astrophysics Data System (ADS)

    Liang, C. P.; Chen, C. F.; Jang, C. S.; Chen, J. S.

    2014-12-01

    Groundwater is comprehensively used for irrigation, aquaculture and public water supply in Pingtung plain. Establishing a sound management plan of multi-purpose groundwater utilization in Pingtung plain is imperial for water resources sustainability. When extracting groundwater for such multi-purpose use, the major concerns are to assure the meets for the different water quality standards for various water use sectors demand and minimizing the pumping impacts on aquifers. The groundwater quality and hydrogeological conditions play important roles in multi-purpose groundwater utilization. Management and effective use of groundwater typically face great challenges, due to the spatial variability of groundwater quality and hydrogeological condition. This study combines the variability of groundwater quality and hydrological condition to propose zonal management of multi-purpose use of groundwater in Pingtung plain. Based on the water quality standards for various groundwater utilization sectors, the integration of hydrochemical parameters are used to delineate most appropriate zones of various groundwater utilization sectors. For evaluation of hydrogeological condition, transmissivity which represents the ability of water transmitted in aquifer is adopted to determine the most suitable zones of groundwater extraction. Based on the analytical results of the water quality parameters and transmissivity in combination with actual groundwater utilization, a zonal management plan of multi-purpose groundwater utilization is established. The framework in this project can provide an effective tool for government administrator establishing a zonal management of multi-purpose groundwater utilization in Pingtung plain.

  1. Composite resin: a versatile, multi-purpose restorative material.

    PubMed

    Margeas, Robert

    2012-01-01

    Introduced more than some 50 years ago, composite resin technology has simplified the manner in which clinicians practice restorative dentistry, offering greater predictability and improved physical properties. Decades of material science and laboratory development along with clinical trials in human subjects have culminated in composite resin being validated as a reliable, multifunctional restorative material. With a wide range of composite resins available today, clinicians can benefit from knowing the infrastructure of a given material in order to determine which type will work best in a particular clinical situation.

  2. Multi-Purpose, Application-Centric, Scalable I/O Proxy Application

    2015-06-15

    MACSio is a Multi-purpose, Application-Centric, Scalable I/O proxy application. It is designed to support a number of goals with respect to parallel I/O performance testing and benchmarking including the ability to test and compare various I/O libraries and I/O paradigms, to predict scalable performance of real applications and to help identify where improvements in I/O performance can be made within the HPC I/O software stack.

  3. The International Space Station's Multi-Purpose Logistics Module, Thermal Performance of the First Five Flights

    NASA Technical Reports Server (NTRS)

    Holladay, Jon; Cho, Frank

    2003-01-01

    The Multi-Purpose Logistics Module is the primary carrier for transport of pressurized payload to the International Space Station. Performing five missions within a thirteen month span provided a unique opportunity to gather a great deal of information toward understanding and verifying the orbital performance of the vehicle. This paper will provide a brief overview of the hardware history and design capabilities followed by a summary of the missions flown, resource requirements and possibilities for the future.

  4. Component Analysis of Multipurpose Contact Lens Solutions To Enhance Activity against Pseudomonas aeruginosa and Staphylococcus aureus.

    PubMed

    Lin, Leo; Kim, Janie; Chen, Hope; Kowalski, Regis; Nizet, Victor

    2016-07-01

    More than 125 million people wear contact lenses worldwide, and contact lens use is the single greatest risk factor for developing microbial keratitis. We tested the antibacterial activity of multipurpose contact lens solutions and their individual component preservatives against the two most common pathogens causing bacterial keratitis, Pseudomonas aeruginosa and Staphylococcus aureus The in vitro antibacterial activity of five multipurpose contact lens solutions (Opti-Free GP, Boston Simplus, Boston Advance, Menicare GP, and Lobob) was assayed by the standard broth dilution method. Synergy between the preservative components found in the top performing solutions was assayed using checkerboard and time-kill assays. The ISO 14729 criteria and the standard broth dilution method were used to define an optimized contact lens solution formulation against a clinical panel of drug-susceptible and drug-resistant P. aeruginosa and S. aureus strains. Preservatives with the biguanide function group, chlorhexidine and polyaminopropylbiguanide (PAPB), had the best antistaphylococcal activity, while EDTA was the best antipseudomonal preservative. The combination of chlorhexidine and EDTA had excellent synergy against P. aeruginosa A solution formulation containing chlorhexidine (30 ppm), PAPB (5 ppm), and EDTA (5,000 ppm) had three to seven times more antipseudomonal activity than anything available to consumers today. A multipurpose contact lens solution containing a combination of chlorhexidine, PAPB, and EDTA could help to reduce the incidence of microbial keratitis for contact lens users worldwide. PMID:27139484

  5. Making ideas at scientific fabrication laboratories

    NASA Astrophysics Data System (ADS)

    Fonda, Carlo; Canessa, Enrique

    2016-11-01

    Creativity, together with the making of ideas into fruition, is essential for progress. Today the evolution from an idea to its application can be facilitated by the implementation of Fabrication Laboratories, or FabLabs, having affordable digital tools for prototyping. FabLabs aiming at scientific research and invention are now starting to be established inside Universities, Research Centers and Schools. We review the setting up of the ICTP Scientific FabLab in Trieste, Italy, give concrete examples on the use in physics, and propose to replicate world-wide this class of multi-purpose workplaces within academia as a support for physics and math education and for community development.

  6. Phase and structural behavior of SmAlO{sub 3}–RAlO{sub 3} (R = Eu, Gd) systems

    SciTech Connect

    Ohon, N.; Vasylechko, L.; Prots, Yu.; Schmidt, M.

    2014-02-01

    Highlights: • Continuous solid solutions exist in the SmAlO{sub 3}–RAlO{sub 3} (R = Eu, Gd) systems. • Lattice parameter crossover was found in solid solutions Sm{sub 1−x}R{sub x}AlO{sub 3} (R = Eu, Gd). • Thermally induced lattice crossovers occur in Sm{sub 0.9}R{sub 0.1}AlO{sub 3} at elevated temperatures. • First-order structural phase transition Pbnm↔R3{sup ¯}c was found in Sm{sub 1−x}R{sub x}AlO{sub 3} (R = Eu, Gd). • Phase diagram of the systems SmAlO{sub 3}–EuAlO{sub 3} and SmAlO{sub 3}–GdAlO{sub 3} has been constructed. - Abstract: Phase and structural behavior in the SmAlO{sub 3}–RAlO{sub 3} (R = Eu, Gd) systems has been studied in a whole concentration range by means of laboratory X-ray diffraction, in situ synchrotron powder diffraction and differential thermal analysis techniques. Continuous solid solutions with orthorhombic perovskite structure have been found in both systems. Peculiarity of the solid solutions of Sm{sub 1−x}Eu{sub x}AlO{sub 3} and Sm{sub 1−x}Gd{sub x}AlO{sub 3} is the existence of two lattice parameter crossovers in each system occurred at x{sub Eu} = 0.07 and 0.62 and at x{sub Gd} = 0.04 and 0.33, respectively. The temperature induced lattice crossovers in the Sm{sub 0.9}Eu{sub 0.1}AlO{sub 3} and Sm{sub 0.9}Gd{sub 0.1}AlO{sub 3} samples have been found at 387 and 922 K and at 501 and 894 K. First-order reversible structural phase transformations Pbnm↔R3{sup ¯}c have been detected in both systems at the elevated temperatures. The temperatures of these transitions increase linearly with the decreasing of the samarium content. Phase diagrams of the pseudo-binary systems SmAlO{sub 3}–EuAlO{sub 3} and SmAlO{sub 3}–GdAlO{sub 3} have been constructed.

  7. Multipurpose 5-MeV linear induction accelerator

    NASA Astrophysics Data System (ADS)

    Birx, D. L.; Hawkins, S. A.; Poor, S. E.; Reginato, L. L.; Smith, M. W.

    1984-06-01

    Although linear induction accelerators (LIAs) are quite reliable by most standards, they are limited in repeating rate, average power, and reliability because the final stage of energy delivery is based on spark gap performance. In addition, they have a low duty factor of operation. To provide a higher burst rate and greater reliability, new technology was used to develop a magnetic pulse compression scheme that eliminates all spark gaps and exceeds requirements. The magnetic drive system are tailored to drive induction cells from a few kA to over 10 kA at 500 kV, with average beam power levels in the megawatts. This new 5-MeV, 2.5-kA LIA under construction at the Lawrence Livermore National Laboratory (LLNL) will be used for the development of high brightness sources and will provide a test bed for the new technology, which should lead to LIAs that surpass the radio frequency linacs for efficiency and reliability, as well as fit other industrial applications, such as sewage sterilization.

  8. Multipurpose 5-MeV linear induction accelerator

    SciTech Connect

    Birx, D.L.; Hawkins, S.A.; Poor, S.E.; Reginato, L.L. Smith, M.W.

    1984-06-11

    Although linear induction accelerators (LIAs) are quite reliable by most standards, they are limited in repeating rate, average power, and reliability because the final stage of energy delivery is based on spark gap performance. In addition, they have a low duty factor of operation. To provide a higher burst rate and greater reliability, the researchers used new technology to develop a magnetic pulse compression scheme that eliminates all spark gaps and exceeds requirements. The paper describes the scheme. The magnetic drive system can be tailored to drive induction cells from a few kA to over 10 kA at 500 kV, with average beam power levels in the megawatts. This new 5-MeV, 2.5-kA LIA under construction at the Lawrence Livermore National Laboratory (LLNL) will be used for the development of high brightness sources and will provide a test bed for the new technology, which should lead to LIAs that surpass the radio frequency linacs for efficiency and reliability, as well as fit other industrial applications, such as sewage sterilization.

  9. UTILITY ADVANCED TURBINE SYSTEMS (ATS) TECHNOLOGY READINESS TESTING: PHASE 3R

    SciTech Connect

    1999-09-01

    The overall objective of the Advanced Turbine System (ATS) Phase 3 Cooperative Agreement between GE and the US Department of Energy (DOE) is the development of the GE 7H and 9H combined cycle power systems. The major effort will be expended on detail design. Validation of critical components and technologies will be performed, including: hot gas path component testing, sub-scale compressor testing, steam purity test trials, and rotational heat transfer confirmation testing. Processes will be developed to support the manufacture of the first system, which was to have been sited and operated in Phase 4 but will now be sited and operated commercially by GE. This change has resulted from DOE's request to GE for deletion of Phase 4 in favor of a restructured Phase 3 (as Phase 3R) to include full speed, no load (FSNL) testing of the 7H gas turbine. Technology enhancements that are not required for the first machine design but will be critical for future ATS advances in performance, reliability, and costs will be initiated. Long-term tests of materials to confirm design life predictions will continue. A schematic of the GE H machine is shown. This report summarizes work accomplished in 2Q99.

  10. Electronic properties of 3R-CuAlO2 under pressure: Three theoretical approaches

    NASA Astrophysics Data System (ADS)

    Christensen, N. E.; Svane, A.; Laskowski, R.; Palanivel, B.; Modak, P.; Chantis, A. N.; van Schilfgaarde, M.; Kotani, T.

    2010-01-01

    The pressure variation in the structural parameters, u and c/a , of the delafossite CuAlO2 is calculated within the local-density approximation (LDA). Further, the electronic structures as obtained by different approximations are compared: LDA, LDA+U , and a recently developed “quasiparticle self-consistent GW ” (QSGW) approximation. The structural parameters obtained by the LDA agree very well with experiments but, as expected, gaps in the formal band structure are underestimated as compared to optical experiments. The (in LDA too high lying) Cu3d states can be down shifted by LDA+U . The magnitude of the electric field gradient (EFG) as obtained within the LDA is far too small. It can be “fitted” to experiments in LDA+U but a simultaneous adjustment of the EFG and the gap cannot be obtained with a single U value. QSGW yields reasonable values for both quantities. LDA and QSGW yield significantly different values for some of the band-gap deformation potentials but calculations within both approximations predict that 3R-CuAlO2 remains an indirect-gap semiconductor at all pressures in its stability range 0-36 GPa, although the smallest direct gap has a negative pressure coefficient.

  11. Oak Ridge National Laboratory Review: Volume 24, Nos. 3 and 4, 1991

    SciTech Connect

    Krause, C.

    1991-01-01

    Oak Ridge National Laboratory (ORNL) is a multiprogram, multipurpose laboratory that conducts research in the physical, chemical, and life sciences; in fusion, fission, and fossil energy; and in energy conservation and other energy-related technologies. This review contains articles on chemical extraction techniques, electron transport in gases and liquids, diamond films, the contribution of fossil fuels to the greenhouse effect, various sensors for safety applications, and temperature measurement with fluorescing paints. (GHH)

  12. Oak Ridge National Laboratory Review: Volume 24, Nos. 3 and 4, 1991

    SciTech Connect

    Krause, C.

    1991-12-31

    Oak Ridge National Laboratory (ORNL) is a multiprogram, multipurpose laboratory that conducts research in the physical, chemical, and life sciences; in fusion, fission, and fossil energy; and in energy conservation and other energy-related technologies. This review contains articles on chemical extraction techniques, electron transport in gases and liquids, diamond films, the contribution of fossil fuels to the greenhouse effect, various sensors for safety applications, and temperature measurement with fluorescing paints. (GHH)

  13. Zonal management of multi-purposes groundwater utilization based on water quality and impact on the aquifer.

    PubMed

    Liang, Ching-Ping; Jang, Cheng-Shin; Chen, Ching-Fang; Chen, Jui-Sheng

    2016-07-01

    Groundwater is widely used for drinking, irrigation, and aquaculture in the Pingtung Plain, Southwestern Taiwan. The overexploitation and poor quality of groundwater in some areas of the Pingtung Plain pose great challenges for the safe use and sustainable management of groundwater resources. Thus, establishing an effective management plan for multi-purpose groundwater utilization in the Pingtung Plain is imperative. Considerations of the quality of the groundwater and potential impact on the aquifer of groundwater exploitation are paramount to multi-purpose groundwater utilization management. This study proposes a zonal management plan for the multi-purpose use of groundwater in the Pingtung Plain. The zonal management plan is developed by considering the spatial variability of the groundwater quality and the impact on the aquifer, which is defined as the ratio of the actual groundwater extraction rate to transmissivity. A geostatistical Kriging approach is used to spatially delineate the safe zones based on the water quality standards applied in the three groundwater utilization sectors. Suitable zones for the impact on the aquifer are then spatially determined. The evaluation results showing the safe water quality zones for the three types of utilization demands and suitable zones for the impact on aquifer are integrated to create a zonal management map for multi-purpose groundwater utilization which can help government administrators to establish a water resource management strategy for safe and sustainable use of groundwater to meet multi-purpose groundwater utilization requirements in the Pingtung Plain.

  14. Zonal management of multi-purposes groundwater utilization based on water quality and impact on the aquifer.

    PubMed

    Liang, Ching-Ping; Jang, Cheng-Shin; Chen, Ching-Fang; Chen, Jui-Sheng

    2016-07-01

    Groundwater is widely used for drinking, irrigation, and aquaculture in the Pingtung Plain, Southwestern Taiwan. The overexploitation and poor quality of groundwater in some areas of the Pingtung Plain pose great challenges for the safe use and sustainable management of groundwater resources. Thus, establishing an effective management plan for multi-purpose groundwater utilization in the Pingtung Plain is imperative. Considerations of the quality of the groundwater and potential impact on the aquifer of groundwater exploitation are paramount to multi-purpose groundwater utilization management. This study proposes a zonal management plan for the multi-purpose use of groundwater in the Pingtung Plain. The zonal management plan is developed by considering the spatial variability of the groundwater quality and the impact on the aquifer, which is defined as the ratio of the actual groundwater extraction rate to transmissivity. A geostatistical Kriging approach is used to spatially delineate the safe zones based on the water quality standards applied in the three groundwater utilization sectors. Suitable zones for the impact on the aquifer are then spatially determined. The evaluation results showing the safe water quality zones for the three types of utilization demands and suitable zones for the impact on aquifer are integrated to create a zonal management map for multi-purpose groundwater utilization which can help government administrators to establish a water resource management strategy for safe and sustainable use of groundwater to meet multi-purpose groundwater utilization requirements in the Pingtung Plain. PMID:27343131

  15. Outcome of the First wwPDB/CCDC/D3R Ligand Validation Workshop.

    PubMed

    Adams, Paul D; Aertgeerts, Kathleen; Bauer, Cary; Bell, Jeffrey A; Berman, Helen M; Bhat, Talapady N; Blaney, Jeff M; Bolton, Evan; Bricogne, Gerard; Brown, David; Burley, Stephen K; Case, David A; Clark, Kirk L; Darden, Tom; Emsley, Paul; Feher, Victoria A; Feng, Zukang; Groom, Colin R; Harris, Seth F; Hendle, Jorg; Holder, Thomas; Joachimiak, Andrzej; Kleywegt, Gerard J; Krojer, Tobias; Marcotrigiano, Joseph; Mark, Alan E; Markley, John L; Miller, Matthew; Minor, Wladek; Montelione, Gaetano T; Murshudov, Garib; Nakagawa, Atsushi; Nakamura, Haruki; Nicholls, Anthony; Nicklaus, Marc; Nolte, Robert T; Padyana, Anil K; Peishoff, Catherine E; Pieniazek, Susan; Read, Randy J; Shao, Chenghua; Sheriff, Steven; Smart, Oliver; Soisson, Stephen; Spurlino, John; Stouch, Terry; Svobodova, Radka; Tempel, Wolfram; Terwilliger, Thomas C; Tronrud, Dale; Velankar, Sameer; Ward, Suzanna C; Warren, Gregory L; Westbrook, John D; Williams, Pamela; Yang, Huanwang; Young, Jasmine

    2016-04-01

    Crystallographic studies of ligands bound to biological macromolecules (proteins and nucleic acids) represent an important source of information concerning drug-target interactions, providing atomic level insights into the physical chemistry of complex formation between macromolecules and ligands. Of the more than 115,000 entries extant in the Protein Data Bank (PDB) archive, ∼75% include at least one non-polymeric ligand. Ligand geometrical and stereochemical quality, the suitability of ligand models for in silico drug discovery and design, and the goodness-of-fit of ligand models to electron-density maps vary widely across the archive. We describe the proceedings and conclusions from the first Worldwide PDB/Cambridge Crystallographic Data Center/Drug Design Data Resource (wwPDB/CCDC/D3R) Ligand Validation Workshop held at the Research Collaboratory for Structural Bioinformatics at Rutgers University on July 30-31, 2015. Experts in protein crystallography from academe and industry came together with non-profit and for-profit software providers for crystallography and with experts in computational chemistry and data archiving to discuss and make recommendations on best practices, as framed by a series of questions central to structural studies of macromolecule-ligand complexes. What data concerning bound ligands should be archived in the PDB? How should the ligands be best represented? How should structural models of macromolecule-ligand complexes be validated? What supplementary information should accompany publications of structural studies of biological macromolecules? Consensus recommendations on best practices developed in response to each of these questions are provided, together with some details regarding implementation. Important issues addressed but not resolved at the workshop are also enumerated. PMID:27050687

  16. Outcome of the First wwPDB/CCDC/D3R Ligand Validation Workshop.

    PubMed

    Adams, Paul D; Aertgeerts, Kathleen; Bauer, Cary; Bell, Jeffrey A; Berman, Helen M; Bhat, Talapady N; Blaney, Jeff M; Bolton, Evan; Bricogne, Gerard; Brown, David; Burley, Stephen K; Case, David A; Clark, Kirk L; Darden, Tom; Emsley, Paul; Feher, Victoria A; Feng, Zukang; Groom, Colin R; Harris, Seth F; Hendle, Jorg; Holder, Thomas; Joachimiak, Andrzej; Kleywegt, Gerard J; Krojer, Tobias; Marcotrigiano, Joseph; Mark, Alan E; Markley, John L; Miller, Matthew; Minor, Wladek; Montelione, Gaetano T; Murshudov, Garib; Nakagawa, Atsushi; Nakamura, Haruki; Nicholls, Anthony; Nicklaus, Marc; Nolte, Robert T; Padyana, Anil K; Peishoff, Catherine E; Pieniazek, Susan; Read, Randy J; Shao, Chenghua; Sheriff, Steven; Smart, Oliver; Soisson, Stephen; Spurlino, John; Stouch, Terry; Svobodova, Radka; Tempel, Wolfram; Terwilliger, Thomas C; Tronrud, Dale; Velankar, Sameer; Ward, Suzanna C; Warren, Gregory L; Westbrook, John D; Williams, Pamela; Yang, Huanwang; Young, Jasmine

    2016-04-01

    Crystallographic studies of ligands bound to biological macromolecules (proteins and nucleic acids) represent an important source of information concerning drug-target interactions, providing atomic level insights into the physical chemistry of complex formation between macromolecules and ligands. Of the more than 115,000 entries extant in the Protein Data Bank (PDB) archive, ∼75% include at least one non-polymeric ligand. Ligand geometrical and stereochemical quality, the suitability of ligand models for in silico drug discovery and design, and the goodness-of-fit of ligand models to electron-density maps vary widely across the archive. We describe the proceedings and conclusions from the first Worldwide PDB/Cambridge Crystallographic Data Center/Drug Design Data Resource (wwPDB/CCDC/D3R) Ligand Validation Workshop held at the Research Collaboratory for Structural Bioinformatics at Rutgers University on July 30-31, 2015. Experts in protein crystallography from academe and industry came together with non-profit and for-profit software providers for crystallography and with experts in computational chemistry and data archiving to discuss and make recommendations on best practices, as framed by a series of questions central to structural studies of macromolecule-ligand complexes. What data concerning bound ligands should be archived in the PDB? How should the ligands be best represented? How should structural models of macromolecule-ligand complexes be validated? What supplementary information should accompany publications of structural studies of biological macromolecules? Consensus recommendations on best practices developed in response to each of these questions are provided, together with some details regarding implementation. Important issues addressed but not resolved at the workshop are also enumerated.

  17. Outcome of the First wwPDB/CCDC/D3R Ligand Validation Workshop

    DOE PAGES

    Adams, Paul  D.; Aertgeerts, Kathleen; Bauer, Cary; Bell, Jeffrey A.; Berman, Helen  M.; Bhat, Talapady  N.; Blaney, Jeff  M.; Bolton, Evan; Bricogne, Gerard; Brown, David; et al

    2016-04-05

    Crystallographic studies of ligands bound to biological macromolecules (proteins and nucleic acids) represent an important source of information concerning drug-target interactions, providing atomic level insights into the physical chemistry of complex formation between macromolecules and ligands. Of the more than 115,000 entries extant in the Protein Data Bank archive, ~75% include at least one non-polymeric ligand. Ligand geometrical and stereochemical quality, the suitability of ligand models for in silico drug discovery/design, and the goodness-of-fit of ligand models to electron density maps vary widely across the archive. We describe the proceedings and conclusions from the first Worldwide Protein Data Bank/Cambridge Crystallographicmore » Data Centre/Drug Design Data Resource (wwPDB/CCDC/D3R) Ligand Validation Workshop held at the Research Collaboratory for Structural Bioinformatics at Rutgers University on July 30-31, 2015. Experts in protein crystallography from academe and industry came together with non-profit and for-profit software providers for crystallography and with experts in computational chemistry and data archiving to discuss and make recommendations on best practices, as framed by a series of questions central to structural studies of macromolecule-ligand complexes. What data concerning bound ligands should be archived in the Protein Data Bank? How should the ligands be best represented? How should structural models of macromolecule-ligand complexes be validated? What supplementary information should accompany publications of structural studies of biological macromolecules? Consensus recommendations on best practices developed in response to each of these questions are provided, together with some details regarding implementation. Important issues addressed but not resolved at the workshop are also enumerated.« less

  18. Crystallographic evidence for dual coordination around zinc in the T3R3 human insulin hexamer.

    PubMed

    Ciszak, E; Smith, G D

    1994-02-15

    The T3R3 human insulin hexamer (T and R referring to extended and alpha-helical conformations, respectively, of the first eight residues of the B-chain), complexed to two zinc ions, crystallizes in space group R3 with hexagonal cell constants a = 80.64 and c = 37.78 A. The structure has been refined to a residual of 0.172 using 9225 independent data to 1.6-A resolution. The asymmetric unit consists of a TR dimer, and the insulin hexamer is generated by the action of the crystallographic 3-fold axis. The conformation of one insulin trimer is nearly identical to that of the T6 hexamer, while the other trimer approximates that of the R6 hexamer, except for the three N-terminal B-chain residues that adopt an extended rather than an alpha-helical conformation. Each of the two zinc ions, which lie on the crystallographic 3-fold axis and exhibit two different, disordered coordination geometries, is coordinated by the imidazole groups of three symmetry-related B10 histidine residues. The coordination sphere of the zinc in the T3 trimer is either tetrahedral, with the fourth site filled by a chloride ion, or octahedral, completed by three water molecules. The coordination of the zinc in the 12-A narrow channel in the R3 trimer is tetrahedral, with either a second chloride ion or a water molecule completing the coordination sphere. The putative off-axial zinc binding sites that result from the T-->R transition of monomer II do not contain zinc ion, but instead are filled with clusters of ordered water molecules.(ABSTRACT TRUNCATED AT 250 WORDS)

  19. Chemo-genomic interrogation of CEBPA mutated AML reveals recurrent CSF3R mutations and subgroup sensitivity to JAK inhibitors.

    PubMed

    Lavallée, Vincent-Philippe; Krosl, Jana; Lemieux, Sébastien; Boucher, Geneviève; Gendron, Patrick; Pabst, Caroline; Boivin, Isabel; Marinier, Anne; Guidos, Cynthia J; Meloche, Sylvain; Hébert, Josée; Sauvageau, Guy

    2016-06-16

    In this study, we analyzed RNA-sequencing data of 14 samples characterized by biallelic CEBPA (CEBPA(bi)) mutations included in the Leucegene collection of 415 primary acute myeloid leukemia (AML) specimens, and describe for the first time high frequency recurrent mutations in the granulocyte colony-stimulating factor receptor gene CSF3R, which signals through JAK-STAT proteins. Chemical interrogation of these primary human specimens revealed a uniform and specific sensitivity to all JAK inhibitors tested irrespective of their CSF3R mutation status, indicating a general sensitization of JAK-STAT signaling in this leukemia subset. Altogether, these results identified the co-occurrence of mutations in CSF3R and CEBPA in a well-defined AML subset, which uniformly responds to JAK inhibitors and paves the way to personalized clinical trials for this disease.

  20. Chemo-genomic interrogation of CEBPA mutated AML reveals recurrent CSF3R mutations and subgroup sensitivity to JAK inhibitors.

    PubMed

    Lavallée, Vincent-Philippe; Krosl, Jana; Lemieux, Sébastien; Boucher, Geneviève; Gendron, Patrick; Pabst, Caroline; Boivin, Isabel; Marinier, Anne; Guidos, Cynthia J; Meloche, Sylvain; Hébert, Josée; Sauvageau, Guy

    2016-06-16

    In this study, we analyzed RNA-sequencing data of 14 samples characterized by biallelic CEBPA (CEBPA(bi)) mutations included in the Leucegene collection of 415 primary acute myeloid leukemia (AML) specimens, and describe for the first time high frequency recurrent mutations in the granulocyte colony-stimulating factor receptor gene CSF3R, which signals through JAK-STAT proteins. Chemical interrogation of these primary human specimens revealed a uniform and specific sensitivity to all JAK inhibitors tested irrespective of their CSF3R mutation status, indicating a general sensitization of JAK-STAT signaling in this leukemia subset. Altogether, these results identified the co-occurrence of mutations in CSF3R and CEBPA in a well-defined AML subset, which uniformly responds to JAK inhibitors and paves the way to personalized clinical trials for this disease. PMID:27034432

  1. Paclitaxel accelerates spontaneous calcium oscillations in cardiomyocytes by interacting with NCS-1 and the InsP3R

    PubMed Central

    Zhang, Kun; Heidrich, Felix M.; DeGray, Brenda; Boehmerle, Wolfgang; Ehrlich, Barbara E.

    2010-01-01

    Paclitaxel (Taxol) is a microtubule-stabilizing compound that is used for cancer chemotherapy. However, Taxol administration is limited by serious side effects including cardiac arrhythmia, which cannot be explained by its microtubule-stabilizing effect. Recently, neuronal calcium sensor 1 (NCS-1), a calcium binding protein that modulates the inositol-1,4,5-trisphosphate receptor (InsP3R), was described as a binding partner of Taxol and as a substrate of calpain. We examined calcium signaling processes in cardiomyocytes after treatment with Taxol to investigate the basis of Taxol-induced cardiac arrhythmia. After treating isolated neonatal rat ventricular myocytes with a therapeutic concentration of Taxol for several hours live cell imaging experiments showed that the frequency of spontaneous calcium oscillations significantly increased. This effect was not mimicked by other tubulin-stabilizing agents. However, it was prevented by inhibiting the InsP3R. Taxol treated cells had increased expression of NCS-1, an effect also detectable after Taxol administration in vivo. Short hairpin RNA mediated knock down of NCS-1 decreased InsP3R dependent intracellular calcium release, whereas Taxol treatment, that increased NCS-1 levels, increased InsP3R dependent calcium release. The effects of Taxol were ryanodine receptor independent. At the single channel level Taxol and NCS-1 mediated an increase in InsP3R activity. Calpain activity was not affected by Taxol in cardiomyocytes suggesting a calpain independent signaling pathway. In short, our study shows that Taxol impacts calcium signaling and calcium oscillations in cardiomyocytes through NCS-1 and the InsP3R. PMID:20801127

  2. Tyms double (2R) and triple repeat (3R) confers risk for human oral squamous cell carcinoma.

    PubMed

    Bezerra, Alexandre Medeiros; Sant'Ana, Thalita Araújo; Gomes, Adriana Vieira; de Lacerda Vidal, Aurora Karla; Muniz, Maria Tereza Cartaxo

    2014-12-01

    The oral cancer is responsible for approximately 3 % of cases of cancer in Brazil. Epidemiological studies have associated low folate intake with an increased risk of epithelial cancers, including oral cancer. Folic acid has a key role in DNA synthesis, repair, methylation and this is the basis of explanations for a putative role for folic acid in cancer prevention. The role of folic acid in carcinogenesis may be modulated by polymorphism C677T in MTHFR and tandem repeats 2R/3R in the promoter site of TYMS gene that are related to decreased enzymatic activity and quantity and availability of the enzyme, respectively. These events cause a decrease in the synthesis, repair and DNA methylation, which can lead to a disruption in the expression of tumor suppressor genes as TP53. The objective of this study was investigate the distribution of polymorphisms C677T and tandem repeats 2R/3R associated with the development of oral squamous cell carcinoma (OSCC). 53 paraffin-embedded samples from patients who underwent surgery but are no longer at the institution and 43 samples collected by method of oral exfoliation by cytobrush were selected. 132 healthy subjects were selected by specialists at the dental clinics of the Faculdade de Odontologia de Pernambuco-FOP. The MTHFR genotyping was performed by PCR-RFLP, and the TYMS genotyping was performed by conventional PCR. Fisher's Exact test at significant level of 5 %. Odds ratios (ORs) and 95 % confidence intervals (CIs) were used to measure the strength of association between genotype frequency and OSCC development. The results were statistically significant for the tandem repeats of the TYMS gene (p = 0.015). The TYMS 2R3R genotype was significantly associated with the development of OSCC (OR = 3.582; 95 % CI 1.240-10.348; p = 0.0262) and also the genotype 3R3R (OR = 3.553; 95 % CI 1.293-9.760; p = 0.0345). When analyzed together, the TYMS 2R3R + 3R3R genotypes also showed association (OR = 3.518; 95 % CI 11.188-10.348; p

  3. The Multi-Purpose Detector for NICA heavy-Ion Collider at JINR

    SciTech Connect

    Rogachevsky, O. V.

    2012-05-15

    The Multi-Purpose Detector (MPD) is designed to study heavy-ion collisions at the Nuclotron-based heavy Ion Collider fAcility (NICA) at JINR, Dubna. Its main components located inside a superconducting solenoid are a tracking system composed of a silicon microstrip vertex detector followed by a large volume time-projection chamber, a time-of-flight system for particle identification and a barrel electromagnetic calorimeter. A zero degree hadron calorimeter is designed specifically to measure the energy of spectators. In this paper, all parts of the apparatus are described and their tracking and particle identification parameters are discussed in some detail.

  4. Programmable Thermostat Module Upgrade for the Multi-Purpose Logistics Module

    NASA Technical Reports Server (NTRS)

    Clark, Dallas; Glasgow, Shaun; Reagan, Shawn; Presson, Keith; Howard, David; Smith, Dennis

    2007-01-01

    The STS-121/ULF1.1 mission was the maiden flight of the Programmable Thermostat Module (PTM) system used to control the 28 V shell heaters on the Multi-Purpose Logistics Module (MPLM). These PTMs, in conjunction with a Data Recorder Module (DRM), provide continuous closed loop temperature control and data recording of MPLM on-orbit heater operations. This paper will discuss the hardware design, development, test and verification (DDT&V) activities performed at the Marshall Space Flight Center (MSFC) as well as the operational implementation and mission performance.

  5. Multi-purpose grating spectrograph for the 4-meter European Solar Telescope

    NASA Astrophysics Data System (ADS)

    Calcines, A.; Collados, M.; Feller, A.; Gelly, B.; Grauf, B.; Hirzberger, J.; López Ariste, A.; Lopez, R. L.; Mein, P.; Sayéde, F.

    2012-09-01

    This communication presents a family of spectrographs designed for the European Solar Telescope. They can operate in four different configurations: a long slit standard spectrograph (LsSS), two devices based on subtractive double pass (TUNIS and MSDP) and one based on an integral field, multi-slit, multi-wavelength configuration. The combination of them composes the multi-purpose grating spectrograph of EST, focused on supporting the different science cases of the solar photosphere and chromosphere in the spectral range from 3900 Å to 23000 Å. The different alternatives are made compatible by using the same base spectrographs and different selectable optical elements corresponding to specific subsystems of each configuration.

  6. Multi-purpose extraocular forceps for small-gauge pars plana vitrectomy.

    PubMed

    Reichel, Elias; Chun, Dal W; Gurley, Kiersten

    2012-01-01

    A multi-purpose titanium forceps has been developed for small-gauge pars plana vitrectomy surgery. These forceps were designed to provide the vitreoretinal surgeon with a single tool for the extraocular manipulations that are necessary for the placement and removal of 23- and 25-gauge trochars for small-incision, sutureless pars plana vitrectomy surgery. The forceps has been designed to allow for the atraumatic manipulation of the conjunctiva, measurement of distance from the limbus, and a strong purchase of the trochar for both its fixation and removal.

  7. Description of a Multipurpose Processing and Storage Complex for the Hanford Site`s radioactive material

    SciTech Connect

    Nyman, D.H.; Wolfe, B.A.; Hoertkorn, T.R.

    1993-05-01

    The mission of the US Department of Energy`s (DOE) Hanford Site has changed from defense nuclear materials production to that of waste management/disposal and environmental restoration. ne Multipurpose Processing and Storage Complex (MPSC) is being designed to process discarded waste tank internal hardware contaminated with mixed wastes, failed melters from the vitrification plant, and other Hanford Site high-level solid waste. The MPSC also will provide interim storage of other radioactive materials (irradiated fuel, canisters of vitrified high-level waste [HLW], special nuclear material [SNM], and other designated radioactive materials).

  8. Phase changes in T(3)R(3)(f) human insulin: temperature or pressure induced?

    PubMed

    Smith, G D; Pangborn, W A; Blessing, R H

    2001-08-01

    The structure of T(3)R(3) hexameric human insulin has been determined at 100 K from two different crystals at 1.2 and 1.3 A resolution and refined to residuals of 0.169 and 0.176, respectively. Owing to a phase change, the c axis is double its room-temperature value and the asymmetric unit contains two independent TR(f) insulin dimers. Compared with the orientation in the room-temperature structure, one dimer undergoes a rotation about the c axis of -5 degrees, while the second is rotated +4 degrees. A superposition of the backbone atoms of the two independent dimers shows that the C(alpha) atoms of five residues within the R(f)-state monomers are displaced by more than 1.0 A; smaller displacements are observed for the T-state monomers. Four zinc ions lie on the crystallographic threefold axis and each forms bonds to three symmetry-related HisB10 N(varepsilon2) atoms from the T- and R(f)-state trimers. While three of the zinc ions are tetrahedrally coordinated with a chloride ion completing the coordination sphere, mixed tetrahedral/octahedral coordination is observed for one of the T-state zinc ions. The three symmetry-related "phenolic binding sites" in one hexamer contain water molecules and a glycerol molecule, but the same sites in the second hexamer are occupied by a zinc ion coordinated to an alternate conformation of HisB10, a symmetry-related HisB5 and two chloride ions. Two additional and partially occupied zinc ion sites are observed at the interface between the two independent dimers. One zinc ion is coordinated by a T-state HisB5 of one dimer, an R-state HisB5 of the second dimer and two water molecules; the second zinc ion is coordinated by an alternate side-chain conformation of the T-state HisB5 and three water molecules. The carboxyl group of one GluB13 side chain, which exists in two discrete conformations, appears to be protonated, because short contacts exist to a second carboxyl group or to a carbonyl O atom.

  9. Plasma physics and environmental perturbation laboratory. Volume 1: Executive summary

    NASA Technical Reports Server (NTRS)

    1973-01-01

    Space physics and plasma physics experiments that can be performed from the space shuttle were identified. Potential experiment concepts were analyzed to derive requirements for a spaceborne experiment facility. The laboratory, known as the Plasma Physics and Environmental Perturbation Laboratory consists of a 33-foot pallet of instruments connected to a 25-foot pressurized control module. Two 50-meter booms, two subsatellites, a high power transmitter, a multipurpose accelerator array, a set of deployable canisters, and a gimbaled instrument platform are the primary systems deployed from the pallet. The pressurized module contains all the control and display equipment required to conduct the experiments, and life support and power subsystems.

  10. IP3R deficit underlies loss of salivary fluid secretion in Sjögren’s Syndrome

    PubMed Central

    Teos, Leyla Y.; Zhang, Yu; Cotrim, Ana P.; Swaim, William; Won, Jon H.; Ambrus, Julian; Shen, Long; Bebris, Lolita; Grisius, Margaret; Jang, Shyh-Ing; Yule, David I.; Ambudkar, Indu S.; Alevizos, Ilias

    2015-01-01

    The autoimmune exocrinopathy, Sjögren’s syndrome (SS), is associated with secretory defects in patients, including individuals with mild lymphocytic infiltration and minimal glandular damage. The mechanism(s) underlying the secretory dysfunction is not known. We have used minor salivary gland biopsies from SS patients and healthy individuals to assess acinar cell function in morphologically intact glandular areas. We report that agonist-regulated intracellular Ca2+ release, critically required for Ca2+ entry and fluid secretion, is defective in acini from SS patients. Importantly, these acini displayed reduction in IP3R2 and IP3R3, but not AQP5 or STIM1. Similar decreases in IP3R and carbachol (CCh)-stimulated [Ca2+]i elevation were detected in acinar cells from lymphotoxin-alpha (LTα) transgenic (TG) mice, a model for (SS). Treatment of salivary glands from healthy individuals with LT α, a cytokine linked to disease progression in SS and IL14α mice, reduced Ca2+ signaling. Together, our findings reveal novel IP3R deficits in acinar cells that underlie secretory dysfunction in SS patients. PMID:26365984

  11. The Effects of Keyword Cues and 3R Strategy on Children's e-Book Reading

    ERIC Educational Resources Information Center

    Liang, T.-H.

    2015-01-01

    Various studies have found that electronic books (e-books) promote learning, but few works have examined the use of e-books along with an adaptive reading strategy for children. The current study implemented a method to extract keyword cues from e-books to support e-book reading with the read, recite and review (3R) strategy, and then examined the…

  12. R3-R4 deletion in the PRNP gene is associated with Creutzfeldt-Jakob disease (CJD)

    SciTech Connect

    Cervenakova, L.; Brown, P.; Nagle, J.

    1994-09-01

    There are conflicting reports on the association of deletions in the PRNP gene on chromosome 20 with CJD, a rapidly progressive fatal spongiform encephalopathy. We accumulated data suggesting that a deletion of R3-R4 type (parts of the third and fourth repeats are deleted from the area of four repeating 24 bp sequences in the 5{prime} region of the gene) is causing CJD. Screening of 129 unaffected control individuals demonstrated presence of a deletion of R2 type in four (1.55% of the studied chromosomes), but none of them had the R3-R4 type. Of 181 screened patients with spongiform encephalopathies, two had a deletion of R3-R4 type with no other mutations in the coding sequence. Both patients had a classical rapidly progressive dementing disease and diffuse spongiform degeneration, and both cases were apparently sporadic. The same R3-R4 type of deletion was detected in three additional neuropathologically confirmed spongiform encephalopathy patients, of which two had other known pathogenic mutations in the PRNP gene: at codon 178 on the methionine allele exhibiting the phenotype of fatal familial insomnia, and codon 200 causing CJD with severe dementia; the third was a patient with iatrogenic CJD who developed the disease after treatment with growth hormone extracted from cadaveric human pituitary glands. In all cases the deletion coincided with a variant sequence at position 129 coding for methionine.

  13. Solid waste management in Asian countries: a review of solid waste minimisation (3'r) towards low carbon

    NASA Astrophysics Data System (ADS)

    Ali, N. E.; Sion, H. C.

    2014-02-01

    The amount of solid-waste generated in Asian countries has increased tremendously, mainly due to the improvement in living standards, rapid developments in technology, growth in economy and population in the cities. Solid waste management is a global issue and major challenge facing Asian countries and neglecting its management may have negative consequences on the environment. Waste composition data proves the developed countries to have generated more recyclable materials while developing countries produce more organic and less recyclable waste such as paper, plastic and aluminium. In this regard, increase in number of landfills and disposal sites, will have an impact on GHG (greenhouse gas) emissions and pollutants to air and water. Alternative methods should therefore be taken to reduce the volume of waste. Most Asian countries have adopted the 3R (reduce, reuse, recycle) concept in order to reduce solid waste and their governments have implemented laws and regulations in order to support this. Implementation of 3R is the major contributor to the solid waste minimization and it can improve the quality of environmental sustainability and reduction of carbon dioxide emission in to the atmosphere. Based on our review, most of the countries practicing the 3R concept in tandem with laws and regulations perform better than those that just practice the 3R concept without any laws and regulations. The paper suggests that every country must focus on the laws and regulations relating to solid waste minimization so that it could be easily implemented as outlined.

  14. Development of ultrananocrystalline diamond (UNCD) coatings for multipurpose mechanical pump seals.

    SciTech Connect

    Kovalchenko, A. M.; Elam, J. W.; Erdemir, A.; Carlisle, J. A.; Auciello, O.; Libera, J. A.; Pellin, M. J.; Gruen, D. M.; Hryn, J. N.

    2011-01-01

    The reliability and performance of silicon carbide (SiC) shaft seals on multipurpose mechanical pumps are improved by applying a protective coating of ultrananocrystalline diamond (UNCD). UNCD exhibits extreme hardness (97 GPa), low friction (0.1 in air) and outstanding chemical resistance. Consequently, the application of UNCD coatings to multipurpose mechanical pump seals can reduce frictional energy losses and eliminate the downtime and hazardous emissions from seal failure and leakage. In this study, UNCD films were prepared by microwave plasma chemical vapor deposition utilizing an argon/methane gas mixture. Prior to coating, the SiC seals were subjected to mechanical polishing using different grades of micron-sized diamond powder to produce different starting surfaces with well-controlled surface roughnesses. Following this roughening process, the seals were seeded by mechanical abrasion with diamond nanopowder, and subsequently coated with UNCD. The coated seals were subjected to dynamic wear testing performed at 3600 RPM and 100 psi for up to 10 days during which the seals were periodically removed and inspected. The UNCD-coated seals were examined using Raman microanalysis, scanning electron microscopy, optical profilometry, and adhesion testing before and after the wear testing. These analyses revealed that delamination of the UNCD films was prevented when the initial SiC seal surface had an initial roughness >0.1 {micro}m. In addition, the UNCD surfaces showed no measurable wear as compared to approximately 0.2 {micro}m of wear for the untreated SiC surfaces.

  15. Basic evaluation of cast joining for electroformed coping using multi-purpose alloys.

    PubMed

    Yamaguchi, Yoko; Takahashi, Hidekazu; Shiota, Makoto; Iwasaki, Naohiko

    2005-09-01

    The purpose of this study was to evaluate the bonding interface and bonding strength of electroformed coping when cast joining was used with a multi-purpose alloy. The multi-purpose alloy was cast at a mold temperature of 700, 750 or 800 degrees C. A high noble alloy tab was also soldered onto an electroformed coping as a control. Sectioned surfaces of cast joining and soldered specimens were observed using a scanning electron microscope and analyzed using an electron probe micro analyzer. Shear bonding strength of specimens cast at 750 degrees C and that of soldered specimens were determined. The edge of the cast joining alloy was round, but this improved as temperature increased. Diffusion of elements from the cast joining alloy and electroformed coping was detected at the interface, which contributed to a significantly higher bonding strength in the cast joining specimen than in the soldered specimen. These results suggested that the cast joining could be potentially employed for electroformed copings.

  16. A self-timed multipurpose delay sensor for Field Programmable Gate Arrays (FPGAs).

    PubMed

    Osuna, Carlos Gómez; Ituero, Pablo; López-Vallejo, Marisa

    2013-12-20

    This paper presents a novel self-timed multi-purpose sensor especially conceived for Field Programmable Gate Arrays (FPGAs). The aim of the sensor is to measure performance variations during the life-cycle of the device, such as process variability, critical path timing and temperature variations. The proposed topology, through the use of both combinational and sequential FPGA elements, amplifies the time of a signal traversing a delay chain to produce a pulse whose width is the sensor's measurement. The sensor is fully self-timed, avoiding the need for clock distribution networks and eliminating the limitations imposed by the system clock. One single off- or on-chip time-to-digital converter is able to perform digitization of several sensors in a single operation. These features allow for a simplified approach for designers wanting to intertwine a multi-purpose sensor network with their application logic. Employed as a temperature sensor, it has been measured to have an error of  ±0.67 °C, over the range of 20-100 °C, employing 20 logic elements with a 2-point calibration.

  17. Sodium binding to hH3R and hH 4R--a molecular modeling study.

    PubMed

    Wittmann, Hans-Joachim; Seifert, Roland; Strasser, Andrea

    2014-08-01

    Several aminergic GPCRs, e.g., the human histamine H3-receptor (hH3R) are sensitive to sodium ions. Based on these experimental results, including site directed mutagenesis studies, a sodium binding pocket near to the highly conserved Asp2.50 was suggested. Recently, in the crystallized adenosine A2A receptor (4EIY), a sodium ion was found in a pocket, coordinated by Asp52, Ser91, and three water molecules. Despite high homology in amino acid sequence between hH3R and hH4R, pharmacological studies revealed that the hH4R is--in contrast to hH3R--not sensitive to sodium ions. In order to obtain a deeper insight onto the differences in sodium sensitivity between hH3R and hH4R, we performed molecular modelling studies, including molecular dynamic simulations and calculation of Gibbs energy of solvation. The results of the modeling studies suggested that the amino acid at position 7.42 influences sodium binding to aminergic GPCRs in different ways. A comparison of the amino acids forming the sodium binding channel between the ligand binding pocket and the sodium binding pocket of all human aminergic GPCRs showed an 80% occurrence of glycine--in contrast to hH3R and hH4R. The Gln7.42 at hH4R disrupts a water chain, connecting the Asp3.32 of the orthosteric binding site and the Asp2.50 of the allosteric binding site. Besides, the oxygen of the glutamine side chain stabilizes the interaction of the sodium ion with the Asp3.32. Thus, the binding of the sodium into the allosteric binding site might be hindered kinetically. PMID:25098339

  18. Multipurpose Compound

    NASA Technical Reports Server (NTRS)

    1983-01-01

    Specially formulated derivatives of an unusual basic compound known as Alcide may be the answer to effective treatment and prevention of the disease bovine mastitis, a bacterial inflammation of a cow's mammary gland that results in loss of milk production and in extreme cases, death. Manufactured by Alcide Corporation the Alcide compound has killed all tested bacteria, virus and fungi, shortly after contact, with minimal toxic effects on humans or animals. Alcide Corporation credits the existence of the mastitis treatment/prevention products to assistance provided the company by NERAC, Inc.

  19. Design of a multi-purpose titanium bottle for uncontaminated sampling of carbon monoxide and potentially of other analytes

    NASA Astrophysics Data System (ADS)

    Doherty, K. W.; Taylor, C. D.; Zafiriou, O. C.

    2003-03-01

    The design, construction, and performance of a non-contaminating titanium sampler for carbon monoxide (CO) are described. In light of the favorable properties of titanium and the minimal contact of O-rings with samples, this multi-purpose design is expected to excel at a broad range of other uses: sampling gases, organic compounds, some trace metals, and living and dead particles.

  20. 77 FR 38582 - Proposed Information Collection; Comment Request; Domestic Client Life-Cycle Multi-Purpose Forms

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-06-28

    ... International Trade Administration Proposed Information Collection; Comment Request; Domestic Client Life-Cycle... information collection will cover all aspects of a U.S. organization's life-cycle with CS. CS is mandated by... services and trade events to U.S. organizations. The Domestic Client Life-cycle Multi-Purpose...

  1. Innovation in Management of Primary School Construction: Multi-Purpose Primary School Buildings in Bangladesh. Educational Building Report 18.

    ERIC Educational Resources Information Center

    Constantinos, Fecadu

    This report deals with school building construction utilizing technology carried out by the Lutheran World Service/Rangpur Dinajpur Rehabilitation Service in Bangladesh. The purpose was to develop an alternative design for primary school constructions. The design, construction, and multipurpose use of the school buildings are described. Appended…

  2. 16 CFR 1145.17 - Multi-purpose lighters that can be operated by children; risks of death or injury.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS REGULATION OF PRODUCTS SUBJECT TO OTHER ACTS UNDER THE CONSUMER PRODUCT SAFETY ACT § 1145.17 Multi-purpose lighters that can be operated by children... the Consumer Product Safety Act any risks of injury associated with the fact that...

  3. Evaluation for School Improvement: A Multi-Level, Multi-Purpose Model. Project: Multi-Level Evaluation Systems.

    ERIC Educational Resources Information Center

    Herman, Joan L.

    A model for a comprehensive, multi-purpose, multi-user evaluation system is presented to facilitate educational decision making and to support school improvement and renewal. The model is school district-based but oriented to meet state-, school-, and classroom-level needs as well. The model emphasizes the usefulness of common or compatible…

  4. Evaluation Report for the ESEA Title III Project, South Bronx Multi-Purpose Supplementary Educational Center (SOMPSEC).

    ERIC Educational Resources Information Center

    North, Robert D.

    This is a report of an evaluation of the South Bronx Multi-Purpose Supplementary Educational Center (SOMPSEC). The primary objectives of SOMPSEC, funded under Title III, Elementary and Secondary Education Act were: (1) to enhance the self-image of minority-group students, (2) to encourage development of their artistic talent, and (3) to increase…

  5. Efficient Approaches to S-alkyl-N-alkylisothioureas and Application to Novel Histamine H3R Antagonists.

    PubMed

    Yoneyama, Hiroki; Yamamoto, Daisuke; Yamatodani, Atsushi; Harusawa, Shinya

    2016-01-01

    S-Alkyl-N-alkylisothiourea compounds, which contain various cyclic amines, were synthesized using 3-phenylpropionyl isothiocyanate (PPI) to discover novel non-imidazole histamine H3 receptor (H3R) antagonists. The synthetic route was improved remarkably by using 2-nitrophenylacetyl isothiocyanate (NPAI). Among the synthesized compounds, N-[4-(4-chlorophenyl)butyl]-S-[3-piperidin-1-yl)propyl]isothiourea (1k, OUP-186) exhibited potent and selective antagonism against human H3R but not human H4R, in vitro. Of particular interest, they did not show antagonism for the histamine release in rat brain microdialysis in vivo, suggesting species-selective differences in antagonist affinities. Furthermore, in silico docking studies of OUP-186 and its C2-homolog (OUP-181) in human/rat H3Rs suggested that the structural difference of antagonist-docking sites between human and rat H3Rs was attributable to the Ala122/Val122 mutation. PMID:27592826

  6. PHD Finger Recognition of Unmodified Histone H3R2 Links UHRF1 to Regulation of Euchromatic Gene Expression

    PubMed Central

    Ma, Honghui; Hu, Lulu; Chen, Hao; Lin, Yan; Guo, Rui; Wu, Feizhen; Li, Haitao; Lan, Fei; Shi, Yujiang Geno; Xu, Yanhui; Patel, Dinshaw J.; Shi, Yang

    2015-01-01

    SUMMARY Histone methylation occurs on both lysine and arginine residues, and its dynamic regulation plays a critical role in chromatin biology. Here we identify the UHRF1 PHD finger (PHDUHRF1), an important regulator of DNA CpG methylation, as a histone H3 unmodified arginine 2 (H3R2) recognition modality. This conclusion is based on binding studies and cocrystal structures of PHDUHRF1 bound to histone H3 peptides, where the guanidinium group of unmodified R2 forms an extensive intermolecular hydrogen bond network, with methylation of H3R2, but not H3K4 or H3K9, disrupting complex formation. We have identified direct target genes of UHRF1 from microarray and ChIP studies. Importantly, we show that UHRF1's ability to repress its direct target gene expression is dependent on PHDUHRF1 binding to unmodified H3R2, thereby demonstrating the functional importance of this recognition event and supporting the potential for crosstalk between histone arginine methylation and UHRF1 function. PMID:21777816

  7. PHD Finger Recognition of Unmodified Histone H3R2 Links UHRF1 to Regulation of Euchromatic Gene Expression

    SciTech Connect

    E Rajakumara; Z Wang; H Ma; L Hu; H Chen; Y Lin; R Guo; F Wu; H Li; et al.

    2011-12-31

    Histone methylation occurs on both lysine and arginine residues, and its dynamic regulation plays a critical role in chromatin biology. Here we identify the UHRF1 PHD finger (PHD{sub UHRF1}), an important regulator of DNA CpG methylation, as a histone H3 unmodified arginine 2 (H3R2) recognition modality. This conclusion is based on binding studies and cocrystal structures of PHD{sub UHRF1} bound to histone H3 peptides, where the guanidinium group of unmodified R2 forms an extensive intermolecular hydrogen bond network, with methylation of H3R2, but not H3K4 or H3K9, disrupting complex formation. We have identified direct target genes of UHRF1 from microarray and ChIP studies. Importantly, we show that UHRF1's ability to repress its direct target gene expression is dependent on PHD{sub UHRF1} binding to unmodified H3R2, thereby demonstrating the functional importance of this recognition event and supporting the potential for crosstalk between histone arginine methylation and UHRF1 function.

  8. Modulation of behavior by the histaminergic system: lessons from HDC-, H3R- and H4R-deficient mice.

    PubMed

    Schneider, Erich H; Neumann, Detlef; Seifert, Roland

    2014-11-01

    Histamine, which is synthesized by histidine decarboxylase (HDC), does not only modulate the immune system, but is also acting as a neurotransmitter. Histaminergic neurons project from the tuberomamillary nucleus to numerous brain regions. Activation of presynaptic H3R inhibits the release of histamine and of non-histaminergic neurotransmitters. The phenotypes of Hdc(-/-)- and Hrh3(-/-) mice comprise behaviors related to locomotor activity, memory, cognition, anxiety, circadian rhythm, pain perception, food intake and addiction. We critically discuss these phenotypes that are probably caused by global changes of the histaminergic tone rather than by an altered stimulation of a single histamine receptor subtype. Constitutive H3R activity may add another layer of complexity by causing "histamine-independent histaminergic" processes, e.g. in Hdc(-/-) mice. We also discuss the clinical relevance of H3R- and HDC-deficient mice, e.g. the role of HDC in Tourette's syndrome. Finally, this review summarizes current knowledge on possible central H4R functions. Neuronal expression of H4R, however, is discussed controversially and a systematic behavioral characterization of Hrh4(-/-) mice is still missing.

  9. PHD Finger Recognition of Unmodified Histone H3R2 Links UHRF1 to Regulation of Euchromatic Gene Expression

    SciTech Connect

    Rajakumara, Eerappa; Wang, Zhentian; Ma, Honghui; Hu, Lulu; Chen, Hao; Lin, Yan; Guo, Rui; Wu, Feizhen; Li, Haitao; Lan, Fei; Shi, Yujiang Geno; Xu, Yanhui; Patel, Dinshaw J.; Shi, Yang

    2011-08-29

    Histone methylation occurs on both lysine and arginine residues, and its dynamic regulation plays a critical role in chromatin biology. Here we identify the UHRF1 PHD finger (PHD{sub UHRF1}), an important regulator of DNA CpG methylation, as a histone H3 unmodified arginine 2 (H3R2) recognition modality. This conclusion is based on binding studies and cocrystal structures of PHD{sub UHRF1} bound to histone H3 peptides, where the guanidinium group of unmodified R2 forms an extensive intermolecular hydrogen bond network, with methylation of H3R2, but not H3K4 or H3K9, disrupting complex formation. We have identified direct target genes of UHRF1 from microarray and ChIP studies. Importantly, we show that UHRF1's ability to repress its direct target gene expression is dependent on PHD{sub UHRF1} binding to unmodified H3R2, thereby demonstrating the functional importance of this recognition event and supporting the potential for crosstalk between histone arginine methylation and UHRF1 function.

  10. Histamine H3-Receptor Signaling in Cardiac Sympathetic Nerves: Identification of a Novel MAPK-PLA2-COX-PGE2-EP3R Pathway

    PubMed Central

    Levi, Roberto; Seyedi, Nahid; Schaefer, Ulrich; Estephan, Rima; Mackins, Christina J.; Tyler, Eleanor; Silver, Randi B.

    2007-01-01

    We tested the hypothesis that the histamine H3-receptor (H3R)-mediated attenuation of norepinephrine (NE) exocytosis from cardiac sympathetic nerves results not only from a Gαi-mediated inhibition of the adenylyl cyclase-cAMP-PKA pathway, but also from a Gβγi-mediated activation of the MAPK-PLA2 cascade, culminating in formation of an arachidonate metabolite with anti-exocytotic characteristics (e.g., PGE2). We report in Langendorff-perfused guinea-pig hearts and isolated sympathetic nerve endings (cardiac synaptosomes), H3R-mediated attenuation of K+-induced NE exocytosis was prevented by MAPK and PLA2 inhibitors, and by cyclooxygenase and EP3-receptor (EP3R) antagonists. Moreover, H3R activation resulted in MAPK phosphorylation in H3R-transfected SH-SY5Y neuroblastoma cells, and in PLA2 activation and PGE2 production in cardiac synaptosomes; H3R-induced MAPK phosphorylation was prevented by an anti-βγ peptide. Synergism between H3R and EP3R agonists (i.e., imetit and sulprostone, respectively) suggested PGE2 may be a downstream effector of the anti-exocytotic effect of H3R activation. Furthermore, the anti-exocytotic effect of imetit and sulprostone was potentiated by the N-type Ca2+-channel antagonist ω-conotoxin GVIA, and prevented by an anti-Gβγ peptide. Our findings suggest an EP3R Gβγi-induced decrease in Ca2+ influx through N-type Ca2+-channels is involved in PGE2/EP3R-mediated attenuation of NE exocytosis elicited by H3R activation. Conceivably, activation of the Gβγi subunit of H3R and EP3R may also inhibit Ca2+ entry directly, independent of MAPK intervention. As heart failure, myocardial ischemia and arrhythmic dysfunction are associated with excessive local NE release, attenuation of NE release by H3R activation is cardioprotective. Thus, the uncovering of a novel H3R signaling pathway may ultimately bear therapeutic significance in hyper-adrenergic states. PMID:17266940

  11. Human inositol 1,4,5-trisphosphate type-1 receptor, InsP3R1: structure, function, regulation of expression and chromosomal localization.

    PubMed Central

    Yamada, N; Makino, Y; Clark, R A; Pearson, D W; Mattei, M G; Guénet, J L; Ohama, E; Fujino, I; Miyawaki, A; Furuichi, T

    1994-01-01

    We have isolated cDNA clones encoding an inositol 1,4,5-trisphosphate receptor type 1 (InsP3R1) from human uteri and a leukaemic cell line, HL-60. Northern-blot analysis showed that approx. 10 kb of InsP3R1 mRNA is expressed in human uteri, oviducts and HL-60 cells. The predicted amino acid sequence of human InsP3R1 (2695 amino acids) has 99% identity with that of the mouse SI-/SII- splicing counterpart. Western-blot analysis with anti-(mouse InsP3R1) antibodies showed that InsP3R1 protein of human uteri and oviducts of approx 220 kDa is immunostained. Northern-blot analysis of HL-60 cell differentiation along the neutrophilic lineage induced by retinoic acid or dimethylsulphoxide showed an accompanying enhanced expression of InsP3R1 mRNA. Immunohistochemical analysis of the cerebella of spinocerebellar degeneration patients showed a variable loss of Purkinje cells with an altered pattern of immunostaining. The InsP3R1 gene (Insp3r1) was localized to the 3P25-26 region of human chromosome 3. The data presented here clearly show that InsP3R1 exists widely in human tissues and may play critical roles in various kinds of cellular functions. Images Figure 2 Figure 3 Figure 5 Figure 6 Figure 7 Figure 8 PMID:7945203

  12. The Raffaello, a Multi-Purpose Logistics Module, arrives at KSC aboard a Beluga super transporter

    NASA Technical Reports Server (NTRS)

    1999-01-01

    An Airbus Industrie A300-600ST 'Beluga' Super Transporter touches down at the Shuttle Landing Facility to deliver its cargo, the second Multi-Purpose Logistics Module (MPLM) for the International Space Station (ISS). One of Italy's major contributions to the ISS program, the MPLM, named Raffaello, is a reusable logistics carrier and the primary delivery system used to resupply and return station cargo requiring a pressurized environment. Weighing nearly 4.5 tons, the module measures 21 feet long and 15 feet in diameter. Raffaello will join Leonardo, the first Italian-built MPLM, in the Space Station Processing Facility for testing. NASA, Boeing, the Italian Space Agency and Alenia Aerospazio will provide engineering support.

  13. The Raffaello, a Multi-Purpose Logistics Module, arrives at KSC aboard a Beluga super transporter

    NASA Technical Reports Server (NTRS)

    1999-01-01

    An Airbus Industrie A300-600ST 'Beluga' Super Transporter is reflected in the rain puddles as it taxis toward the mate/demate tower at the Shuttle Landing Facility. The Beluga is carrying the Raffaello, the second Multi-Purpose Logistics Module (MPLM) for the International Space Station (ISS). One of Italy's major contributions to the ISS program, the MPLM is a reusable logistics carrier and the primary delivery system used to resupply and return station cargo requiring a pressurized environment. Weighing nearly 4.5 tons, the module measures 21 feet long and 15 feet in diameter. Raffaello will join Leonardo, the first Italian-built MPLM, in the Space Station Processing Facility for testing. NASA, Boeing, the Italian Space Agency and Alenia Aerospazio will provide engineering support.

  14. The Raffaello, a Multi-Purpose Logistics Module, arrives at KSC aboard a Beluga super transporter

    NASA Technical Reports Server (NTRS)

    1999-01-01

    An Airbus Industrie A300-600ST 'Beluga' Super Transporter is reflected in the rain puddles as it comes to a stop at the Shuttle Landing Facility. The Beluga is carrying the Raffaello, the second Multi-Purpose Logistics Module (MPLM) for the International Space Station (ISS). One of Italy's major contributions to the ISS program, the MPLM is a reusable logistics carrier and the primary delivery system used to resupply and return station cargo requiring a pressurized environment. Weighing nearly 4.5 tons, the module measures 21 feet long and 15 feet in diameter. Raffaello will join Leonardo, the first Italian-built MPLM, in the Space Station Processing Facility for testing. NASA, Boeing, the Italian Space Agency and Alenia Aerospazio will provide engineering support.

  15. The Raffaello, a Multi-Purpose Logistics Module, arrives at KSC aboard a Beluga super transporter

    NASA Technical Reports Server (NTRS)

    1999-01-01

    An Airbus Industrie A300-600ST 'Beluga' Super Transporter lands in the rain at the Shuttle Landing Facility to deliver its cargo, the second Multi-Purpose Logistics Module (MPLM) for the International Space Station (ISS). One of Italy's major contributions to the ISS program, the MPLM, named Raffaello, is a reusable logistics carrier and the primary delivery system used to resupply and return station cargo requiring a pressurized environment. Weighing nearly 4.5 tons, the module measures 21 feet long and 15 feet in diameter. Raffaello will join Leonardo, the first Italian-built MPLM, in the Space Station Processing Facility for testing. NASA, Boeing, the Italian Space Agency and Alenia Aerospazio will provide engineering support.

  16. Descent and Landing Triggers for the Orion Multi-Purpose Crew Vehicle Exploration Flight Test-1

    NASA Technical Reports Server (NTRS)

    Bihari, Brian D.; Semrau, Jeffrey D.; Duke, Charity J.

    2013-01-01

    The Orion Multi-Purpose Crew Vehicle (MPCV) will perform a flight test known as Exploration Flight Test-1 (EFT-1) currently scheduled for 2014. One of the primary functions of this test is to exercise all of the important Guidance, Navigation, Control (GN&C), and Propulsion systems, along with the flight software for future flights. The Descent and Landing segment of the flight is governed by the requirements levied on the GN&C system by the Landing and Recovery System (LRS). The LRS is a complex system of parachutes and flight control modes that ensure that the Orion MPCV safely lands at its designated target in the Pacific Ocean. The Descent and Landing segment begins with the jettisoning of the Forward Bay Cover and concludes with sensing touchdown. This paper discusses the requirements, design, testing, analysis and performance of the current EFT-1 Descent and Landing Triggers flight software.

  17. NASA AND ESA Partnership on the Multi-Purpose Crew Vehicle Service Module

    NASA Technical Reports Server (NTRS)

    Free, James M.; Schubert, Kathleen; Grantier, Julie

    2012-01-01

    In March 2011, NASA and ESA made a decision to partially offset the European obligations deriving from the extension of the ISS Program until the end of 2020 with different means than ATVs, following the ATV-5 mission foreseen in mid-2014. NASA and ESA considered a number of barter options, and concluded that the provision by ESA of the Service Module and Spacecraft Adaptor for the NASA Multi-Purpose Crew Vehicle (MPCV) was the barter element with the most interest. A joint ESA - NASA working group was established to assess the feasibility of Europe developing this Module based on ATV heritage. The working group was supported by European and US industry namely Astrium, TAS-I and Lockheed-Martin. This paper gives an overview of the results of the on-going study as well as its projected utilization for the global space exploration endeavour.

  18. Cleaning efficacy of single-purpose surfactant cleaners and multi-purpose solutions.

    PubMed

    Franklin, V J

    1997-01-01

    The initial stages of contact lens spoilation are rapid with respect to the deposition of tear components, in particular, lipids and proteins. In addition, extrinsic factors such as care solutions, cosmetics, skin lipids, drugs and tobacco smoke may all play an important part in the spoilation process. Care systems have different effects on this spoilation. Assessment of the relative cleaning efficacies of the single purpose and multipurpose cleaners which are now available in the UK (e.g. ReNu, Optifree, Complete), is of importance in understanding progressive contact lens-tear interactions. This paper furthers our understanding of the efficacies of these solutions in removing the deposition of tear components from the contact lens.

  19. Aquatic toxicity of the decontamination agent: Multipurpose (DAM) decontamination solution. Final report, May-December 1992

    SciTech Connect

    Haley, M.V.; Kurnas, C.W.; Chester, N.A.; Muse, W.T.

    1994-05-01

    A new formulation, Decontaminating Agent: Multipurpose (DAM) Decontamination Solution, is being considered as a replacement to the DS-2 decontaminating solution. The new formulation is composed of calcium hypochlorite and N-cyclohexyl-2-pyrrolidinone. Since this is a new formulation little environmental data exists. To estimate potential impact to an aquatic environment, Daphnia magna and Photobacterium phosphoreum (a luminescent marine bacterium) were exposed to the DAM solution and to the individual components (Calcium hypochlorite and N-cyclohexyl-2-pyrrolidinone). The toxicity of the DAM solution to D. magna and P. phosphoreum was 5000 and 0.00053, respectively (highly toxic). The toxicity of calcium hypochlorite' and N-cyclohexyl-2-pyrrolidinone to daphnia was 0.04 mg/L (highly toxic) and 107 mg/L (moderately toxic), respectively.

  20. Raffaello Multi-Purpose Logistics Module (MPLM) in Discovery Cargo Bay

    NASA Technical Reports Server (NTRS)

    2005-01-01

    Launched on July 26, 2005 from the Kennedy Space Center in Florida, STS-114 was classified as Logistics Flight 1. Among the Station-related activities of the mission were the delivery of new supplies and the replacement of one of the orbital outpost's Control Moment Gyroscopes (CMGs). STS-114 also carried the Raffaello Multi-Purpose Logistics Module (MPLM) and the External Stowage Platform-2. Back dropped by popcorn-like clouds, the MPLM can be seen in the cargo bay as Discovery undergoes rendezvous and docking operations. Cosmonaut Sergei K. Kriklev, Expedition 11 Commander, and John L. Phillips, NASA Space Station officer and flight engineer photographed the spacecraft from the International Space Station (ISS).

  1. Raffaello Multi-Purpose Logistics Module (MPLM) in Discovery Cargo Bay

    NASA Technical Reports Server (NTRS)

    2005-01-01

    Launched on July 26 2005 from the Kennedy Space Center in Florida, STS-114 was classified as Logistics Flight 1. Among the Station-related activities of the mission were the delivery of new supplies and the replacement of one of the orbital outpost's Control Moment Gyroscopes (CMGs). STS-114 also carried the Raffaello Multi-Purpose Logistics Module (MPLM) and the External Stowage Platform-2. Back dropped by popcorn-like clouds, the MPLM can be seen in the cargo bay as Discovery undergoes rendezvous and docking operations. Cosmonaut Sergei K. Kriklev, Expedition 11 Commander, and John L. Phillips, NASA Space Station officer and flight engineer photographed the spacecraft from the International Space Station (ISS).

  2. Vacuum excavation, hydraulics combined by consumers power in a do-everything multi-purpose vehicle

    SciTech Connect

    Hale, D.

    1985-11-01

    A multi-purpose maintenance vehicle is described that is productive, efficient, mobile, flexible and economical. Three such vehicles are currently in operation in the Consumers Power system in Michigan. Some advantages are listed and include: only a twoman crew required; vehicles equipped for all types of repair and maintenance operations; safer because there is no moving boom; inconvenience to public/pedestrians/vehicles are minimized; and shoring is eliminated. Several tasks are listed which may be performed by the vehicle: cast iron pipe bell joint repair; leak clamp applications; service line abandonments; service line renewals; anode, test wire, and bond wire installations; curb box and valve box cleaning; and checking for and venting leaks.

  3. Controlling levonorgestrel binding and release in a multi-purpose prevention technology vaginal ring device.

    PubMed

    Murphy, Diarmaid J; Boyd, Peter; McCoy, Clare F; Kumar, Sandeep; Holt, Jonathon D S; Blanda, Wendy; Brimer, Andrew N; Malcolm, R Karl

    2016-03-28

    Despite a long history of incorporating steroids into silicone elastomers for drug delivery applications, little is presently known about the propensity for irreversible drug binding in these systems. In this study, the ability of the contraceptive progestin levonorgestrel to bind chemically with hydrosilane groups in addition-cure silicone elastomers has been thoroughly investigated. Cure time, cure temperature, levonorgestrel particle size, initial levonorgestrel loading and silicone elastomer type were demonstrated to be key parameters impacting the extent of levonorgestrel binding, each through their influence on the solubility of levonorgestrel in the silicone elastomer. Understanding and overcoming this levonorgestrel binding phenomenon is critical for the ongoing development of a number of drug delivery products, including a multi-purpose technology vaginal ring device offering simultaneous release of levonorgestrel and dapivirine - a lead candidate antiretroviral microbicide - for combination HIV prevention and hormonal contraception.

  4. A 60Co multipurpose radiation processing facility at Bahia Blanca, Argentina

    NASA Astrophysics Data System (ADS)

    Curzio, O. A.; Croci, C. A.

    The aim of the project is to have a multipurpose facility which will enable us to show the techno-economic viability of the irradiation process applied to regional products, important from the economic point of view. The topics will fundamentally be connected with regional themes such as food preservation and the modification of polymer structures. This project will make it possible to carry out basic and applied studies related to radiation chemistry, dosimetry and engineering irradiation processes. The facility will operate in the Universidad Nacional del Sur (UNS) with a maximum activity of 18.5 PBq of Co-60. The viability and design of the irradiation facility is supported by the Government of the Buenos Aires Province since it is interested in the socio-economic benefit of this technology at the regional level.

  5. Rational design of the column of a heavy multipurpose machining center

    NASA Astrophysics Data System (ADS)

    Atapin, V. V.; Kurlaev, N. V.

    2016-04-01

    The main purpose in the design of supporting constructions of heavy multipurpose machining center is the reduction of mass at the given precision and productivity of machining. Accomplish these ends the technology of rational design of supporting constructions is offered. This technology is based on the decomposition method and the finite elements method in the combination with optimization methods. The technology has four stages: 1) calculation of external forces and loads, 2) as a result the boundary conditions (force, kinematics) for individual supporting constructions are formed, 3) a problem about final optimal distribution of a material by the individual supporting constructions with the real cross-section is solved; 4) dynamic analysis. By the example of design of the column of a heavy multipurpose machining center the main stages of rational design of the individual supporting constructions are shown. At a design stage of the carrying system consisting of load-bearing structures with simplified geometry, optimum overall dimensions of the column are identified. For the admitted system of preferences, it is necessary to accept the fact that the carrying system with the column with the sizes of cross section of 1.8 m (along х axis) and 2.6 m (along y axis) is the best. The analysis of the work of the column under the torsion condition with the use of method of mechanics shows that the column with square cross sections = 2.46·2.46 m which rigidity on torsion is 26 % higher in comparison with a production version is the best. The results of calculation show that a production-release design of the column with longitudinal and transverse edges of rigidity is 24 % heavier than the column with the edges located on a diagonally at equal rigidity.

  6. Rational design of the column of a heavy multipurpose machining center

    NASA Astrophysics Data System (ADS)

    Atapin, V. V.; Kurlaev, N. V.

    2016-04-01

    The main purpose in the design of supporting constructions of heavy multipurpose machining center is the reduction of mass at the given precision and productivity of machining. Accomplish these ends the technology of rational design of supporting constructions is offered. This technology is based on the decomposition method and the finite elements method in the combination with optimization methods. The technology has four stages: 1) calculation of external forces and loads, 2) as a result the boundary conditions (force, kinematics) for individual supporting constructions are formed, 3) a problem about final optimal distribution of a material by the individual supporting constructions with the real cross-section is solved; 4) dynamic analysis. By the example of design of the column of a heavy multipurpose machining center the main stages of rational design of the individual supporting constructions are shown. At a design stage of the carrying system consisting of load-bearing structures with simplified geometry, optimum overall dimensions of the column are identified. For the admitted system of preferences, it is necessary to accept the fact that the carrying system with the column with the sizes of cross section of 1.8 m (along x axis) and 2.6 m (along y axis) is the best. The analysis of the work of the column under the torsion condition with the use of method of mechanics shows that the column with square cross sections = 2.46·2.46 m which rigidity on torsion is 26 % higher in comparison with a production version is the best. The results of calculation show that a production-release design of the column with longitudinal and transverse edges of rigidity is 24 % heavier than the column with the edges located on a diagonally at equal rigidity.

  7. Volatile Organic Compounds Identified in Post-Flight Air Analysis of the Multipurpose Logistics Module from International Space Station

    NASA Astrophysics Data System (ADS)

    Peterson, B.; Wheeler, R.

    Bioregenerative systems involve storing and processing waste along with atmospheric management. The MPLM, Multipurpose Logistics Module, is a reusable logistics carrier and primary delivery system used to resupply the International Space Station (ISS) and return Station cargo that requires a pressurized environment. The cylindrical module is approximately 6.4 meters long, 4.6 meters in diameter, and weighs almost 4,082kg. The module provides storage and additional workspace for up to two astronauts when docked to the ISS. It can carry up to 9,072 kg of supplies, science experiments, spare parts and other logistical components for ISS. There is concern for a potentially hazardous condition caused by contamination of the atmosphere in the MPLM upon return from orbit. This would be largely due to unforeseen spills or container leakage. This has led to the need for special care in handling the returned module prior to processing the module for its next flight. Prior to opening the MPLM, atmospheric samples are analyzed for trace volatile organic compounds, VOC's. It is noted that our analyses also reflect the atmosphere in the ISS on that day of closure. With the re turn of STS-108, 12th ISS Flight (UF1), the analysis showed 24 PPM of methane. This corresponds to the high levels on space station during a time period when the air filtration system was shut off. Chemical characterization of atmospheres on the ISS and MPLM provide useful information for concerns with plant growth experiments on ISS. Work with closed plant growth chambers show potential for VOC's to accumulate to toxic levels for plants. The ethylene levels for 4 MPLM analyses over the course on one year were measured at, 0.070, 0.017, 0.012 and 0.007 PPM. Phytochemical such as ethylene are detected with natural plant physiological events such as flowering and as a result of plant damage or from decaying food. A build up of VOC's may contribute to phytotoxic effects for the plant growth experiments or

  8. An IP3R3- and NPY-Expressing Microvillous Cell Mediates Tissue Homeostasis and Regeneration in the Mouse Olfactory Epithelium

    PubMed Central

    Jia, Cuihong; Hayoz, Sebastien; Hutch, Chelsea R.; Iqbal, Tania R.; Pooley, Apryl E.; Hegg, Colleen C.

    2013-01-01

    Calcium-dependent release of neurotrophic factors plays an important role in the maintenance of neurons, yet the release mechanisms are understudied. The inositol triphosphate (IP3) receptor is a calcium release channel that has a physiological role in cell growth, development, sensory perception, neuronal signaling and secretion. In the olfactory system, the IP3 receptor subtype 3 (IP3R3) is expressed exclusively in a microvillous cell subtype that is the predominant cell expressing neurotrophic factor neuropeptide Y (NPY). We hypothesized that IP3R3-expressing microvillous cells secrete sufficient NPY needed for both the continual maintenance of the neuronal population and for neuroregeneration following injury. We addressed this question by assessing the release of NPY and the regenerative capabilities of wild type, IP3R3+/−, and IP3R3−/− mice. Injury, simulated using extracellular ATP, induced IP3 receptor-mediated NPY release in wild-type mice. ATP-evoked NPY release was impaired in IP3R3−/− mice, suggesting that IP3R3 contributes to NPY release following injury. Under normal physiological conditions, both IP3R3−/− mice and explants from these mice had fewer progenitor cells that proliferate and differentiate into immature neurons. Although the number of mature neurons and the in vivo rate of proliferation were not altered, the proliferative response to the olfactotoxicant satratoxin G and olfactory bulb ablation injury was compromised in the olfactory epithelium of IP3R3−/− mice. The reductions in both NPY release and number of progenitor cells in IP3R3−/− mice point to a role of the IP3R3 in tissue homeostasis and neuroregeneration. Collectively, these data suggest that IP3R3 expressing microvillous cells are actively responsive to injury and promote recovery. PMID:23516531

  9. An IP3R3- and NPY-expressing microvillous cell mediates tissue homeostasis and regeneration in the mouse olfactory epithelium.

    PubMed

    Jia, Cuihong; Hayoz, Sebastien; Hutch, Chelsea R; Iqbal, Tania R; Pooley, Apryl E; Hegg, Colleen C

    2013-01-01

    Calcium-dependent release of neurotrophic factors plays an important role in the maintenance of neurons, yet the release mechanisms are understudied. The inositol triphosphate (IP3) receptor is a calcium release channel that has a physiological role in cell growth, development, sensory perception, neuronal signaling and secretion. In the olfactory system, the IP3 receptor subtype 3 (IP3R3) is expressed exclusively in a microvillous cell subtype that is the predominant cell expressing neurotrophic factor neuropeptide Y (NPY). We hypothesized that IP3R3-expressing microvillous cells secrete sufficient NPY needed for both the continual maintenance of the neuronal population and for neuroregeneration following injury. We addressed this question by assessing the release of NPY and the regenerative capabilities of wild type, IP3R3(+/-), and IP3R3(-/-) mice. Injury, simulated using extracellular ATP, induced IP3 receptor-mediated NPY release in wild-type mice. ATP-evoked NPY release was impaired in IP3R3(-/-) mice, suggesting that IP3R3 contributes to NPY release following injury. Under normal physiological conditions, both IP3R3(-/-) mice and explants from these mice had fewer progenitor cells that proliferate and differentiate into immature neurons. Although the number of mature neurons and the in vivo rate of proliferation were not altered, the proliferative response to the olfactotoxicant satratoxin G and olfactory bulb ablation injury was compromised in the olfactory epithelium of IP3R3(-/-) mice. The reductions in both NPY release and number of progenitor cells in IP3R3(-/-) mice point to a role of the IP3R3 in tissue homeostasis and neuroregeneration. Collectively, these data suggest that IP3R3 expressing microvillous cells are actively responsive to injury and promote recovery.

  10. Strategic focus on 3R principles reveals major reductions in the use of animals in pharmaceutical toxicity testing.

    PubMed

    Törnqvist, Elin; Annas, Anita; Granath, Britta; Jalkesten, Elisabeth; Cotgreave, Ian; Öberg, Mattias

    2014-01-01

    The principles of the 3Rs, Replacement, Reduction and Refinement, are being increasingly incorporated into legislations, guidelines and practice of animal experiments in order to safeguard animal welfare. In the present study we have studied the systematic application of 3R principles to toxicological research in the pharmaceutical industry, with particular focus on achieving reductions in animal numbers used in regulatory and investigatory in vivo studies. The work also details major factors influencing these reductions including the conception of ideas, cross-departmental working and acceptance into the work process. Data from 36 reduction projects were collected retrospectively from work between 2006 and 2010. Substantial reduction in animal use was achieved by different strategies, including improved study design, method development and project coordination. Major animal savings were shown in both regulatory and investigative safety studies. If a similar (i.e. 53%) reduction had been achieved simultaneously within the twelve largest pharmaceutical companies, the equivalent reduction world-wide would be about 150,000 rats annually. The results point at the importance of a strong 3R culture, with scientific engagement, collaboration and a responsive management being vital components. A strong commitment in leadership for the 3R is recommended to be translated into cross-department and inter-profession involvement in projects for innovation, validation and implementation. Synergies between all the three Rs are observed and conclude that in silico-, in vitro- and in vivo-methods all hold the potential for applying the reduction R and should be consequently coordinated at a strategic level. PMID:25054864

  11. Strategic focus on 3R principles reveals major reductions in the use of animals in pharmaceutical toxicity testing.

    PubMed

    Törnqvist, Elin; Annas, Anita; Granath, Britta; Jalkesten, Elisabeth; Cotgreave, Ian; Öberg, Mattias

    2014-01-01

    The principles of the 3Rs, Replacement, Reduction and Refinement, are being increasingly incorporated into legislations, guidelines and practice of animal experiments in order to safeguard animal welfare. In the present study we have studied the systematic application of 3R principles to toxicological research in the pharmaceutical industry, with particular focus on achieving reductions in animal numbers used in regulatory and investigatory in vivo studies. The work also details major factors influencing these reductions including the conception of ideas, cross-departmental working and acceptance into the work process. Data from 36 reduction projects were collected retrospectively from work between 2006 and 2010. Substantial reduction in animal use was achieved by different strategies, including improved study design, method development and project coordination. Major animal savings were shown in both regulatory and investigative safety studies. If a similar (i.e. 53%) reduction had been achieved simultaneously within the twelve largest pharmaceutical companies, the equivalent reduction world-wide would be about 150,000 rats annually. The results point at the importance of a strong 3R culture, with scientific engagement, collaboration and a responsive management being vital components. A strong commitment in leadership for the 3R is recommended to be translated into cross-department and inter-profession involvement in projects for innovation, validation and implementation. Synergies between all the three Rs are observed and conclude that in silico-, in vitro- and in vivo-methods all hold the potential for applying the reduction R and should be consequently coordinated at a strategic level.

  12. The effects of D3R on TLR4 signaling involved in the regulation of METH-mediated mast cells activation.

    PubMed

    Xue, Li; Geng, Yan; Li, Ming; Jin, Yao-Feng; Ren, Hui-Xun; Li, Xia; Wu, Feng; Wang, Biao; Cheng, Wei-Ying; Chen, Teng; Chen, Yan-Jiong

    2016-07-01

    Accumulating studies have revealed that the dopamine D3 receptor (D3R) plays an important role in methamphetamine (METH) addiction. However, the action of D3R on METH-mediated immune response and the underlying mechanism remain unclear. Mast cells (MCs) are currently identified as effector cells in many processes of immune responses, and MC activation is induced by various stimuli such as lipopolysaccharide (LPS). Moreover, CD117 and FcεRI are known as MC markers due to their specific expression in MCs. To investigate the effects of D3R on METH-mediated alteration of LPS-induced MCs activation and the underlying mechanism, in this study, we examined the expression of CD117 and FcεRI in the intestines of wild-type (D3R(+/+)) and D3R-deficient (D3R(-/-)) mice. We also measured the production of MC-derived cytokines, including TNF-α, IL-6, IL-4, IL-13 and CCL-5, in the bone marrow-derived mast cells (BMMCs) of WT and D3R(-/-) mice. Furthermore, we explored the effects of D3R on METH-mediated TLR4 and downstream MAPK and NF-κB signaling induced by LPS in mouse BMMCs. We found that METH suppressed MC activation induced by LPS in the intestines of D3R(+/)mice. In contrast, LPS-induced MC activation was less affected by METH in D3R(-/-) mice. Furthermore, METH altered LPS-induced cytokine production in BMMCs of D3R(+/+) mice but not D3R(-/-) mice. D3R was also involved in METH-mediated modulation of LPS-induced expression of TLR4 and downstream MAPK and NF-κB signaling molecules in mouse BMMCs. Taken together, our findings demonstrate that the effect of D3R on TLR4 signaling may be implicated in the regulation of METH-mediated MCs activation induced by LPS. PMID:27156126

  13. Holographic Analysis of Kikuchi Electron Diffraction Data from Si(111)(√ {3}x√ {3})R30o-Al

    NASA Astrophysics Data System (ADS)

    Glander, G. S.

    Holographic analysis was applied to Kikuchi electron diffraction data collected from the Si(111)(√ {3}x√ {3})R30o-Al structure to produce real-space images of the surface structure. Methods for calibrating the initial diffraction data are fully described. The images clearly show features caused by the Al atoms in the T4 absorption site. Measurements of the Al-Si bond length and the height of the Al above the top layer of Si agree with the values known from dynamical LEED studies.

  14. THERMODYNAMIC PROPERTIES OF THE METALLIC SYSTEM Au(111)-(3×3)R30∘-Pd

    NASA Astrophysics Data System (ADS)

    Chadli, R.; Kheffache, S.; Khater, A.

    2016-02-01

    This work constitutes an analysis of the thermodynamic properties in the ordered metallic surface alloy system Au(111)-(3×3)R30∘-Pd. The equilibrium structural characteristics as well as the thermodynamic functions are examined by the matching method, associated with real space Green’s function formalism, evaluated in the harmonic approximation. Our numerical results, for this metallic system of surface alloy, show in particular a significant dependence between the thermodynamic properties and the coordination number and the values of the force constants.

  15. Oak Ridge National Laboratory Research Reactor Experimenters' Guide

    SciTech Connect

    Cagle, C.D.

    1982-10-01

    The Oak Ridge National Laboratory has three multipurpose research reactors which accommodate testing loops, target irradiations, and beam-type experiments. Since the experiments must share common or similar facilities and utilities, be designed and fabricated by the same groups, and meet the same safety criteria, certain standards for these have been developed. These standards deal only with those properties from which safety and economy of time and money can be maximized and do not relate to the intent of the experiment or quality of the data obtained. The necessity for, and the limitations of, the standards are discussed; and a compilation of general standards is included.

  16. Exome sequencing identifies a novel mutation in PIK3R1 as the cause of SHORT syndrome

    PubMed Central

    2014-01-01

    Background SHORT syndrome is a rare autosomal dominant condition whose name is the acronym of short stature, hyperextensibility of joints, ocular depression, Rieger anomaly and teething delay (MIM 269880). Additionally, the patients usually present a low birth weight and height, lipodystrophy, delayed bone age, hernias, low body mass index and a progeroid appearance. Case presentation In this study, we used whole-exome sequencing approaches in two patients with clinical features of SHORT syndrome. We report the finding of a novel mutation in PIK3R1 (c.1929_1933delTGGCA; p.Asp643Aspfs*8), as well as a recurrent mutation c.1945C > T (p.Arg649Trp) in this gene. Conclusions We found a novel frameshift mutation in PIK3R1 (c.1929_1933delTGGCA; p.Asp643Aspfs*8) which consists of a deletion right before the site of substrate recognition. As a consequence, the protein lacks the position that interacts with the phosphotyrosine residue of the substrate, resulting in the development of SHORT syndrome. PMID:24886349

  17. The Effects of T4 and A3/R Bacteriophages on Differentiation of Human Myeloid Dendritic Cells.

    PubMed

    Bocian, Katarzyna; Borysowski, Jan; Zarzycki, Michał; Pacek, Magdalena; Weber-Dąbrowska, Beata; Machcińska, Maja; Korczak-Kowalska, Grażyna; Górski, Andrzej

    2016-01-01

    Bacteriophages (phages) are viruses of bacteria. Here we evaluated the effects of T4 and A3/R bacteriophages, as well as phage-generated bacterial lysates, on differentiation of human myeloid dendritic cells (DCs) from monocytes. Neither of the phages significantly reduced the expression of markers associated with differentiation of DCs and their role in the activation of T cells (CD40, CD80, CD83, CD86, CD1c, CD11c, MHC II, PD-L1, PD-L2, TLR2, TLR4, and CCR7) and phagocytosis receptors (CD64 and DEC-205). By contrast, bacterial lysate of T4 phage significantly decreased the percentages of DEC-205- and CD1c-positive cells. The percentage of DEC-205-positive cells was also significantly reduced in DCs differentiated in the presence of lysate of A3/R phage. Thus while bacteriophages do not substantially affect differentiation of DCs, some products of phage-induced lysis of bacterial cells may influence the differentiation and potentially also some functions of DCs. Our results have important implications for phage therapy of bacterial infections because during infections monocytes recruited to the site of inflammation are an important source of inflammatory DCs. PMID:27582733

  18. The Effects of T4 and A3/R Bacteriophages on Differentiation of Human Myeloid Dendritic Cells

    PubMed Central

    Bocian, Katarzyna; Borysowski, Jan; Zarzycki, Michał; Pacek, Magdalena; Weber-Dąbrowska, Beata; Machcińska, Maja; Korczak-Kowalska, Grażyna; Górski, Andrzej

    2016-01-01

    Bacteriophages (phages) are viruses of bacteria. Here we evaluated the effects of T4 and A3/R bacteriophages, as well as phage-generated bacterial lysates, on differentiation of human myeloid dendritic cells (DCs) from monocytes. Neither of the phages significantly reduced the expression of markers associated with differentiation of DCs and their role in the activation of T cells (CD40, CD80, CD83, CD86, CD1c, CD11c, MHC II, PD-L1, PD-L2, TLR2, TLR4, and CCR7) and phagocytosis receptors (CD64 and DEC-205). By contrast, bacterial lysate of T4 phage significantly decreased the percentages of DEC-205- and CD1c-positive cells. The percentage of DEC-205-positive cells was also significantly reduced in DCs differentiated in the presence of lysate of A3/R phage. Thus while bacteriophages do not substantially affect differentiation of DCs, some products of phage-induced lysis of bacterial cells may influence the differentiation and potentially also some functions of DCs. Our results have important implications for phage therapy of bacterial infections because during infections monocytes recruited to the site of inflammation are an important source of inflammatory DCs. PMID:27582733

  19. The Effects of T4 and A3/R Bacteriophages on Differentiation of Human Myeloid Dendritic Cells.

    PubMed

    Bocian, Katarzyna; Borysowski, Jan; Zarzycki, Michał; Pacek, Magdalena; Weber-Dąbrowska, Beata; Machcińska, Maja; Korczak-Kowalska, Grażyna; Górski, Andrzej

    2016-01-01

    Bacteriophages (phages) are viruses of bacteria. Here we evaluated the effects of T4 and A3/R bacteriophages, as well as phage-generated bacterial lysates, on differentiation of human myeloid dendritic cells (DCs) from monocytes. Neither of the phages significantly reduced the expression of markers associated with differentiation of DCs and their role in the activation of T cells (CD40, CD80, CD83, CD86, CD1c, CD11c, MHC II, PD-L1, PD-L2, TLR2, TLR4, and CCR7) and phagocytosis receptors (CD64 and DEC-205). By contrast, bacterial lysate of T4 phage significantly decreased the percentages of DEC-205- and CD1c-positive cells. The percentage of DEC-205-positive cells was also significantly reduced in DCs differentiated in the presence of lysate of A3/R phage. Thus while bacteriophages do not substantially affect differentiation of DCs, some products of phage-induced lysis of bacterial cells may influence the differentiation and potentially also some functions of DCs. Our results have important implications for phage therapy of bacterial infections because during infections monocytes recruited to the site of inflammation are an important source of inflammatory DCs.

  20. The ACTN3 R577X nonsense allele is under-represented in elite-level strength athletes.

    PubMed

    Roth, Stephen M; Walsh, Sean; Liu, Dongmei; Metter, E Jeffrey; Ferrucci, Luigi; Hurley, Ben F

    2008-03-01

    Previous reports have shown a lower proportion of the ACTN3 X/X genotype (R577X nonsense polymorphism) in sprint-related athletes compared to the general population, possibly attributed to impairment of muscle function related to alpha-actinin-3 deficiency. In the present study, we examined the frequency of the X/X genotype in both Black and White elite-level bodybuilders and strength athletes in comparison to the general population. A reference population of 668 Whites (363 men and 305 women) and 208 Blacks (98 men and 110 women) was genotyped for the ACTN3 R577X polymorphism. Strength athletes (52 white and 23 black; 4 women) consisting predominantly of world class and locally competitive bodybuilders, and elite powerlifters were recruited and similarly genotyped. Significantly lower X/X genotype frequencies were observed in the athletes (6.7%) vs controls (16.3%; P=0.005). The X/X genotype was significantly lower in White athletes (9.7%) vs controls (19.9%; P=0.018). No black athletes (0%) were observed with the X/X genotype, though this finding only approached statistical significance vs controls (4.8%; P=0.10). The results indicate that the ACTN3 R577X nonsense allele (X) is under-represented in elite strength athletes, consistent with previous reports indicating that alpha-actinin-3 deficiency appears to impair muscle performance.

  1. Amoebicidal activity of a preserved contact lens multipurpose disinfecting solution compared to a disinfection/neutralisation peroxide system.

    PubMed

    Buck, S L; Rosenthal, R A; Abshire, R L

    1998-01-01

    The amoebicidal activity of a contact lens multipurpose disinfecting solution (MPDS) containing polyquaternium-1 and myristamidopropyl dimethylamine was compared to a disinfection/neutralisation peroxide system against Acanthamoeba castellanii and Acanthamoeba polyphaga trophozoites and cysts. A quantitative microtitre method was used to evaluate the solutions. The MPDS showed similar amoebicidal activity to the disinfection/neutralisation peroxide system against the trophozoites of both species and equal or more rapid activity against the cysts of both species. PMID:16303382

  2. Scavenger receptor BI: a multi-purpose player in cholesterol and steroid metabolism.

    PubMed

    Hoekstra, Menno; Van Berkel, Theo-Jc; Van Eck, Miranda

    2010-12-21

    Scavenger receptor class B type I (SR-BI) is an important member of the scavenger receptor family of integral membrane glycoproteins. This review highlights studies in SR-BI knockout mice, which concern the role of SR-BI in cholesterol and steroid metabolism. SR-BI in hepatocytes is the sole molecule involved in selective uptake of cholesteryl esters from high-density lipoprotein (HDL). SR-BI plays a physiological role in binding and uptake of native apolipoprotein B (apoB)-containing lipoproteins by hepatocytes, which identifies SR-BI as a multi-purpose player in lipid uptake from the blood circulation into hepatocytes in mice. In adrenocortical cells, SR-BI mediates the selective uptake of HDL-cholesteryl esters, which is efficiently coupled to the synthesis of glucocorticoids (i.e. corticosterone). SR-BI knockout mice suffer from adrenal glucocorticoid insufficiency, which suggests that functional SR-BI protein is necessary for optimal adrenal steroidogenesis in mice. SR-BI in macrophages plays a dual role in cholesterol metabolism as it is able to take up cholesterol associated with HDL and apoB-containing lipoproteins and can possibly facilitate cholesterol efflux to HDL. Absence of SR-BI is associated with thrombocytopenia and altered thrombosis susceptibility, which suggests a novel role for SR-BI in regulating platelet number and function in mice. Transgenic expression of cholesteryl ester transfer protein in humanized SR-BI knockout mice normalizes hepatic delivery of HDL-cholesteryl esters. However, other pathologies associated with SR-BI deficiency, i.e. increased atherosclerosis susceptibility, adrenal glucocorticoid insufficiency, and impaired platelet function are not normalized, which suggests an important role for SR-BI in cholesterol and steroid metabolism in man. In conclusion, generation of SR-BI knockout mice has significantly contributed to our knowledge of the physiological role of SR-BI. Studies using these mice have identified SR-BI as a

  3. Knowledge and work performance of multi-purpose workers under national leprosy eradication programme in Satara district, Maharashtra.

    PubMed

    Mohite, R V; Mohite, V R

    2012-01-01

    After integration of leprosy services into general health care services, peripheral health care workers played important role in leprosy elimination. The objectives of present study are to assess the knowledge and work performance of multi-purpose workers and it's correlation towards eradication of leprosy under national leprosy eradication programme in Satara district. The cross sectional study was conducted over a period of 6 months includes 71 Primary health centres (PHCs) and 6 Urban leprosy centres (ULCs) providing leprosy services to whole Satara district, Maharashtra. Random sampling technique was used to select study subjects (Multi-purpose workers, MPWs) and data was collected by using pre-tested semi structured proforma by personal interview method. Percentage distribution and statistical association between knowledge and work performance was analysed. More than 88.31% MPWs had good knowledge about leprosy and National leprosy eradication programme (NLEP), similarly more than 88.42% showed good work performance under NLEP in Satara district. Significant statistical association was existed between age and work experience of MPWs with their work performance under NLEP (chi2=11.2, p=0.023* and chi2=10.1, p=0.038*). Significant correlation was also observed between knowledge of MPWs about leprosy and NLEP with their work performance under NLEP (r=0.66, p=0.001*). Satara district achieved leprosy elimination which was mainly due to very good knowledge and quality work performance by multi-purpose workers.

  4. Laboratory Tests

    MedlinePlus

    Laboratory tests check a sample of your blood, urine, or body tissues. A technician or your doctor ... compare your results to results from previous tests. Laboratory tests are often part of a routine checkup ...

  5. Functional analysis of human CNGA3 mutations associated with colour blindness suggests impaired surface expression of channel mutants A3(R427C) and A3(R563C).

    PubMed

    Koeppen, Katja; Reuter, Peggy; Kohl, Susanne; Baumann, Britta; Ladewig, Thomas; Wissinger, Bernd

    2008-05-01

    Mutations in the CNGA3 gene have been associated with complete and incomplete forms of total colour blindness (achromatopsia), a disorder characterized by reduced visual acuity, lack of colour discrimination, photophobia and nystagmus. CNGA3 encodes the A-subunit of the cone photoreceptor cyclic nucleotide-gated (CNG) channel, an essential component of the phototransduction cascade. Here we report the identification of three new CNGA3 mutations in patients with achromatopsia. To assess the pathogenicity of these newly identified and four previously reported mutations, mutant CNGA3 channels were heterologously expressed in a human embryonic kidney cell line (HEK293 cells) and functionally analysed using calcium imaging. Channels with the mutations R427C and R563C showed a response in imaging experiments and were subsequently characterized in-depth with the patch-clamp technique. The mutant channels were analysed as homooligomers and also as heterooligomers with the wild-type B-subunit present in native channels. Overall, cyclic guanosine monophosphate (cGMP) maximum currents of mutant channels were profoundly reduced in homo- and heteromers. Treatment with the chemical chaperone glycerol effectively increased macroscopic currents, presumably by enhancing surface expression of mutant channels as confirmed by immunocytochemistry. These results suggest decreased channel density in the cell membrane due to impaired folding or trafficking of the channel protein as the main pathogenic effect of the mutations R427C and R563C. Moreover, A3(R427C) homomers showed distinctly increased cGMP and cyclic adenosine monophosphate (cAMP) sensitivities as well as cAMP fractional currents that were raised to over 90% of cGMP maximum currents. Co-expression of A3(R427C) with the B3 subunit compensated for most of these aberrant properties, apart from the reduced cGMP maximum currents. PMID:18445228

  6. Functional analysis of human CNGA3 mutations associated with colour blindness suggests impaired surface expression of channel mutants A3(R427C) and A3(R563C).

    PubMed

    Koeppen, Katja; Reuter, Peggy; Kohl, Susanne; Baumann, Britta; Ladewig, Thomas; Wissinger, Bernd

    2008-05-01

    Mutations in the CNGA3 gene have been associated with complete and incomplete forms of total colour blindness (achromatopsia), a disorder characterized by reduced visual acuity, lack of colour discrimination, photophobia and nystagmus. CNGA3 encodes the A-subunit of the cone photoreceptor cyclic nucleotide-gated (CNG) channel, an essential component of the phototransduction cascade. Here we report the identification of three new CNGA3 mutations in patients with achromatopsia. To assess the pathogenicity of these newly identified and four previously reported mutations, mutant CNGA3 channels were heterologously expressed in a human embryonic kidney cell line (HEK293 cells) and functionally analysed using calcium imaging. Channels with the mutations R427C and R563C showed a response in imaging experiments and were subsequently characterized in-depth with the patch-clamp technique. The mutant channels were analysed as homooligomers and also as heterooligomers with the wild-type B-subunit present in native channels. Overall, cyclic guanosine monophosphate (cGMP) maximum currents of mutant channels were profoundly reduced in homo- and heteromers. Treatment with the chemical chaperone glycerol effectively increased macroscopic currents, presumably by enhancing surface expression of mutant channels as confirmed by immunocytochemistry. These results suggest decreased channel density in the cell membrane due to impaired folding or trafficking of the channel protein as the main pathogenic effect of the mutations R427C and R563C. Moreover, A3(R427C) homomers showed distinctly increased cGMP and cyclic adenosine monophosphate (cAMP) sensitivities as well as cAMP fractional currents that were raised to over 90% of cGMP maximum currents. Co-expression of A3(R427C) with the B3 subunit compensated for most of these aberrant properties, apart from the reduced cGMP maximum currents.

  7. Parallel effects of the inversion In(3R)Payne on body size across the North American and Australian clines in Drosophila melanogaster.

    PubMed

    Kapun, M; Schmidt, C; Durmaz, E; Schmidt, P S; Flatt, T

    2016-05-01

    Chromosomal inversions are thought to play a major role in climatic adaptation. In D. melanogaster, the cosmopolitan inversion In(3R)Payne exhibits latitudinal clines on multiple continents. As many fitness traits show similar clines, it is tempting to hypothesize that In(3R)P underlies observed clinal patterns for some of these traits. In support of this idea, previous work in Australian populations has demonstrated that In(3R)P affects body size but not development time or cold resistance. However, similar data from other clines of this inversion are largely lacking; finding parallel effects of In(3R)P across multiple clines would considerably strengthen the case for clinal selection. Here, we have analysed the phenotypic effects of In(3R)P in populations originating from the endpoints of the latitudinal cline along the North American east coast. We measured development time, egg-to-adult survival, several size-related traits (femur and tibia length, wing area and shape), chill coma recovery, oxidative stress resistance and triglyceride content in homokaryon lines carrying In(3R)P or the standard arrangement. Our central finding is that the effects of In(3R)P along the North American cline match those observed in Australia: standard arrangement lines were larger than inverted lines, but the inversion did not influence development time or cold resistance. Similarly, In(3R)P did not affect egg-to-adult survival, oxidative stress resistance and lipid content. In(3R)P thus seems to specifically affect size traits in populations from both continents. This parallelism strongly suggests an adaptive pattern, whereby the inversion has captured alleles associated with growth regulation and clinal selection acts on size across both continents.

  8. Software-programmable continuous-flow multi-purpose lab-on-a-chip.

    PubMed

    Amin, Ahmed M; Thakur, Raviraj; Madren, Seth; Chuang, Han-Sheng; Thottethodi, Mithuna; Vijaykumar, T N; Wereley, Steven T; Jacobson, Stephen C

    2013-11-01

    Current lab-on-a-chip (LoC) devices are assay-specific and are custom-built for each single experiment. Performing an experiment requires scientists or engineers to go through the time-consuming process of designing, fabricating, and testing a chip before conducting the actual experiment. This prolonged cycle can take months to complete, increasing effort and cost and reducing productivity. Similarly, minor modifications to an assay protocol re-incur the overheads of the design cycle. In this paper, we develop a multi-purpose, software-programmableLab-on-a-Chip (SPLoC), where the user simply writes or downloads a program for each experiment. We describe the components necessary to realize the SPLoC, which include a high-level programming language, an abstract instruction set, a runtime and control system, and a microfluidic device. We describe two key features of our high-level language compiler, and describe a novel variable-volume variable-ratio mixer. Finally, we demonstrate our SPLoC on four diverse, real-world assays. PMID:24436691

  9. Earthscape, a Multi-Purpose Interactive 3d Globe Viewer for Hybrid Data Visualization and Analysis

    NASA Astrophysics Data System (ADS)

    Sarthou, A.; Mas, S.; Jacquin, M.; Moreno, N.; Salamon, A.

    2015-08-01

    The hybrid visualization and interaction tool EarthScape is presented here. The software is able to display simultaneously LiDAR point clouds, draped videos with moving footprint, volume scientific data (using volume rendering, isosurface and slice plane), raster data such as still satellite images, vector data and 3D models such as buildings or vehicles. The application runs on touch screen devices such as tablets. The software is based on open source libraries, such as OpenSceneGraph, osgEarth and OpenCV, and shader programming is used to implement volume rendering of scientific data. The next goal of EarthScape is to perform data analysis using ENVI Services Engine, a cloud data analysis solution. EarthScape is also designed to be a client of Jagwire which provides multisource geo-referenced video fluxes. When all these components will be included, EarthScape will be a multi-purpose platform that will provide at the same time data analysis, hybrid visualization and complex interactions. The software is available on demand for free at france@exelisvis.com.

  10. Multipurpose furnace for in situ studies of polycrystalline materials using synchrotron radiation.

    PubMed

    Sharma, Hemant; Wattjes, Alix C; Amirthalingam, Murugaiyan; Zuidwijk, Thim; Geerlofs, Nico; Offerman, S Erik

    2009-12-01

    We report a multipurpose furnace designed for studies using synchrotron radiation on polycrystalline materials, namely, metals, ceramics, and (semi)crystalline polymers. The furnace has been designed to carry out three-dimensional (3D) x-ray diffraction measurements but can also be used for other types of synchrotron radiation research. The furnace has a very low thermal gradient across the specimen (<0.2 degrees C/mm). Accurate determination of the temperature can be carried out by welding a thermocouple to the specimen. The furnace can be rotated over an angle of 90 degrees in order to determine the crystallographic orientation of each individual grain. It is possible to follow growth kinetics of all grains in the illuminated volume of the specimen. The specimen environment can be controlled varying from vacuum (up to 10(-5) mbar) to gas or air filled. The maximum temperature of operation is 1500 degrees C, with the possibility of achieving high heating (up to 20 degrees C/s) and cooling rates (up to 30 degrees C/s without quenching gas). 3D maps of the microstructure of the specimen can be generated at elevated temperatures by bringing the high-resolution detector close to the specimen. We show an example of a simulation of the heat affected zone during the thermal cycle of a weld in a transformation-induced plasticity steel carried out using the furnace. The unique characteristics of the furnace open possibility of new fields in materials research using synchrotron radiation.

  11. Comparing utilitarian and hedonic usefulness to user intention in multipurpose information systems.

    PubMed

    Gu, Ja-Chul; Fan, Liu; Suh, Yung Ho; Lee, Sang-Chul

    2010-06-01

    This research studies the differences between productivity-oriented (or utilitarian) and entertainment-oriented (or hedonic) usefulness for a multipurpose information system in user acceptance models, as information systems can be high or low in both hedonic and utilitarian attributes. Accordingly, perceived usefulness (PU) is divided into perceived utilitarian usefulness (PUU) and perceived hedonic usefulness (PHU) to provide a better understanding of users' intention for accepting IT. To test the proposed model more effectively, this research targets instant messaging (IM), which is an extremely popular and increasingly important communication system, both utilitarian and hedonic in nature. This research compares the difference across two groups: students for hedonic purpose and employees for utilitarian purpose. We conclude that the proposed model, which distinguishes between utilitarian and hedonic usefulness, is more effective than previous models in which the usefulness was not distinguished. Both PUU and PHU have an effect on intention to use. Employees consider PUU more important in their intention to use IM, while students are more influenced by PHU.

  12. NASA and ESA Partnership on the Multi-Purpose Crew Vehicle Service Module

    NASA Technical Reports Server (NTRS)

    Schubert, Kathleen E.; Grantier, Julie A.

    2012-01-01

    (1) ESA decided in its Council Meeting in March 2011 to partially offset the European ISS obligations after 2015 with different means than ATVs; (2) The envisioned approach is based on a barter element(s) that would generate cost avoidance on the NASA side; (3) NASA and ESA considered a number of Barter options, NASA concluded that the provision by ESA of the Service Module for the NASA Multi-Purpose Crew Vehicle (MPCV) was the barter with the most interest;. (4) A joint ESA - NASA working group was established in May 2011 to assess the feasibility of Europe developing this Module based on ATV heritage; (5)The working group was supported by European and US industry namely Astrium, TAS-I and Lockheed-Martin; and (6) The project is currently in phase B1 with the objective to prepare a technical and programmatic proposal for an ESA MPCV-SM development. This proposal will be one element of the package that ESA plans submit to go forward for approval by European Ministers in November 2012.

  13. Wave-atoms-based multipurpose scheme via perceptual image hashing and watermarking.

    PubMed

    Liu, Fang; Fu, Qi-Kai; Cheng, Lee-Ming

    2012-09-20

    This paper presents a novel multipurpose scheme for content-based image authentication and copyright protection using a perceptual image hashing and watermarking strategy based on a wave atom transform. The wave atom transform is expected to outperform other transforms because it gains sparser expansion and better representation for texture than other traditional transforms, such as wavelet and curvelet transforms. Images are decomposed into multiscale bands with a number of tilings using the wave atom transform. Perceptual hashes are then extracted from the features of tiling in the third scale band for the purpose of content-based authentication; simultaneously, part of the selected hashes are designed as watermarks, which are embedded into the original images for the purpose of copyright protection. The experimental results demonstrate that the proposed scheme shows great performance in content-based authentication by distinguishing the maliciously attacked images from the nonmaliciously attacked images. Moreover, watermarks extracted from the proposed scheme also achieve high robustness against common malicious and nonmalicious image-processing attacks, which provides excellent copyright protection for images.

  14. INITIAL WASTE PACKAGE PROBABILISTIC CRITICALITY ANALYSIS: MULTI-PURPOSE CANISTER WITH DISPOSAL CONTAINER (TBV)

    SciTech Connect

    J.R. Massari

    1995-10-06

    This analysis is prepared by the Mined Geologic Disposal System (MGDS) Waste Package Development Department (WPDD) to provide an assessment of the present waste package design from a criticality risk standpoint. The specific objectives of this initial analysis are to: (1) Establish a process for determining the probability of waste package criticality as a function of time (in terms of a cumulative distribution function, probability distribution function, or expected number of criticalities in a specified time interval) for various waste package concepts; (2) Demonstrate the established process by estimating the probability of criticality as a function of time since emplacement for an intact multi-purpose canister waste package (MPC-WP) configuration; (3) Identify the dominant sequences leading to waste package criticality for subsequent detailed analysis. The purpose of this analysis is to document and demonstrate the developed process as it has been applied to the MPC-WP. This revision is performed to correct deficiencies in the previous revision and provide further detail on the calculations performed. This analysis is similar to that performed for the uncanistered fuel waste package (UCF-WP, B00000000-01717-2200-00079).

  15. Evaluation of Life Sciences Glovebox (LSG) and Multi-Purpose Crew Restraint Concepts

    NASA Technical Reports Server (NTRS)

    Whitmore, Mihriban

    2005-01-01

    Within the scope of the Multi-purpose Crew Restraints for Long Duration Spaceflights project, funded by Code U, it was proposed to conduct a series of evaluations on the ground and on the KC-135 to investigate the human factors issues concerning confined/unique workstations, such as the design of crew restraints. The usability of multiple crew restraints was evaluated for use with the Life Sciences Glovebox (LSG) and for performing general purpose tasks. The purpose of the KC-135 microgravity evaluation was to: (1) to investigate the usability and effectiveness of the concepts developed, (2) to gather recommendations for further development of the concepts, and (3) to verify the validity of the existing requirements. Some designs had already been tested during a March KC-135 evaluation, and testing revealed the need for modifications/enhancements. This flight was designed to test the new iterations, as well as some new concepts. This flight also involved higher fidelity tasks in the LSG, and the addition of load cells on the gloveports.

  16. MATISSE: Multi-purpose Advanced Tool for Instruments for the Solar System Exploration .

    NASA Astrophysics Data System (ADS)

    Zinzi, A.; Capria, M. T.; Antonelli, L. A.

    In planetary sciences, design, assemble and launch onboard instruments are only preliminary steps toward the final aim of converting data into scientific knowledge, as the real challenge is the data analysis and interpretation. Up to now data have been generally stored in "old style" archives, i.e. common ftp servers where the user can manually search for data browsing directories organized in a time order manner. However, as datasets to be stored and searched become particularly large, this latter task absorbs a great part of the time, subtracting time to the real scientific work. In order to reduce the time spent to search and analyze data MATISSE (Multi-purpose Advanced Tool for Instruments for the Solar System Exploration), a new set of software tools developed together with the scientific teams of the instruments involved, is under development at ASDC (ASI Science Data Center), whose experience in space missions data management is well known (e.g., \\citealt{verrecchia07,pittori09,giommi09,massaro11}) and its features and aims will be presented here.

  17. DISMANTLING OF THE UPPER RPV COMPONENTS OF THE KARLSRUHE MULTI-PURPOSE RESEARCH REACTOR (MZFR), GERMANY

    SciTech Connect

    Prechtl, E.; Suessdorf, W.

    2003-02-27

    The Multi-purpose Research Reactor was a pressurized-water reactor cooled and moderated with heavy water. It was built from 1961 to 1966 and went critical for the first time on 29 September 1965. After nineteen years of successful operation, the reactor was de-activated on 3 May 1984. The reactor had a thermal output of 200 MW and an electrical output of 50 MW. The MZFR not only served to supply electrical power, but also as a test bed for: - research into various materials for reactor building (e. g. zirkaloy), - the manufacturing and operating industry to gain experience in erection and operation, - training scientific and technical reactor staff, and - power supply (first nuclear combined-heat-and-power system, 1979-1984). The experience gained in operating the MZFR was very helpful for the development and operation of power reactors. At first, safe containment and enclosure of the plant was planned, but then it was decided to dismantle the plant completely, step by step, in view o f the clear advantages of this approach. The decommissioning concept for the complete elimination of the plant down to a green-field site provides for eight steps. A separate decommissioning license is required for each step. As part of the dismantling, about 72,000 Mg [metric tons] of concrete and 7,200 Mg of metal (400 Mg RPV) must be removed. About 700 Mg of concrete (500 Mg biological shield) and 1300 Mg of metal must be classified as radioactive waste.

  18. Sweat Rates During Continuous and Interval Aerobic Exercise: Implications for NASA Multipurpose Crew Vehicle (MPCV) Missions

    NASA Technical Reports Server (NTRS)

    Ryder, Jeffrey W.; Scott, Jessica; Ploutz-Snyder, Lori L.

    2016-01-01

    Aerobic deconditioning is one of the effects spaceflight. Impaired crewmember performance due to loss of aerobic conditioning is one of the risks identified for mitigation by the NASA Human Research Program. Missions longer than 8 days will involve exercise countermeasures including those aimed at preventing the loss of aerobic capacity. The NASA Multipurpose Crew Vehicle (MPCV) will be NASA's centerpiece architecture for human space exploration beyond low Earth orbit. Aerobic exercise within the small habitable volume of the MPCV is expected to challenge the ability of the Air Revitalization System, especially in terms of moisture and temperature control. Exercising humans contribute moisture to the environment by increased respiratory rate (exhaling air saturated with moisture) and sweat. Current acceptable values are based on theoretical models that rely on an "average" crew member working continuously at 75% of their aerobic capacity (Human Systems Integration Requirements Document). Evidence suggests that high intensity interval exercise for much shorter durations are equally effective or better in building and maintaining aerobic capacity. This investigation will examine metabolic moisture and heat production for operationally relevant continuous and interval aerobic exercise protocols. The results will directly inform what types of aerobic exercise countermeasures will be feasible to prescribe for crewmembers aboard the MPCV.

  19. A multipurpose camera system for monitoring Kīlauea Volcano, Hawai'i

    USGS Publications Warehouse

    Patrick, Matthew R.; Orr, Tim R.; Lee, Lopaka; Moniz, Cyril J.

    2015-01-01

    We describe a low-cost, compact multipurpose camera system designed for field deployment at active volcanoes that can be used either as a webcam (transmitting images back to an observatory in real-time) or as a time-lapse camera system (storing images onto the camera system for periodic retrieval during field visits). The system also has the capability to acquire high-definition video. The camera system uses a Raspberry Pi single-board computer and a 5-megapixel low-light (near-infrared sensitive) camera, as well as a small Global Positioning System (GPS) module to ensure accurate time-stamping of images. Custom Python scripts control the webcam and GPS unit and handle data management. The inexpensive nature of the system allows it to be installed at hazardous sites where it might be lost. Another major advantage of this camera system is that it provides accurate internal timing (independent of network connection) and, because a full Linux operating system and the Python programming language are available on the camera system itself, it has the versatility to be configured for the specific needs of the user. We describe example deployments of the camera at Kīlauea Volcano, Hawai‘i, to monitor ongoing summit lava lake activity. 

  20. Polymeric graphitic carbon nitride as a heterogeneous organocatalyst: from photochemistry to multipurpose catalysis to sustainable chemistry.

    PubMed

    Wang, Yong; Wang, Xinchen; Antonietti, Markus

    2012-01-01

    Polymeric graphitic carbon nitride materials (for simplicity: g-C(3)N(4)) have attracted much attention in recent years because of their similarity to graphene. They are composed of C, N, and some minor H content only. In contrast to graphenes, g-C(3)N(4) is a medium-bandgap semiconductor and in that role an effective photocatalyst and chemical catalyst for a broad variety of reactions. In this Review, we describe the "polymer chemistry" of this structure, how band positions and bandgap can be varied by doping and copolymerization, and how the organic solid can be textured to make it an effective heterogenous catalyst. g-C(3)N(4) and its modifications have a high thermal and chemical stability and can catalyze a number of "dream reactions", such as photochemical splitting of water, mild and selective oxidation reactions, and--as a coactive catalytic support--superactive hydrogenation reactions. As carbon nitride is metal-free as such, it also tolerates functional groups and is therefore suited for multipurpose applications in biomass conversion and sustainable chemistry. PMID:22109976

  1. The DBHS proteins SFPQ, NONO and PSPC1: a multipurpose molecular scaffold

    PubMed Central

    Knott, Gavin J.; Bond, Charles S.; Fox, Archa H.

    2016-01-01

    Nuclear proteins are often given a concise title that captures their function, such as ‘transcription factor,’ ‘polymerase’ or ‘nuclear-receptor.’ However, for members of the Drosophila behavior/human splicing (DBHS) protein family, no such clean-cut title exists. DBHS proteins are frequently identified engaging in almost every step of gene regulation, including but not limited to, transcriptional regulation, RNA processing and transport, and DNA repair. Herein, we present a coherent picture of DBHS proteins, integrating recent structural insights on dimerization, nucleic acid binding modalities and oligomerization propensity with biological function. The emerging paradigm describes a family of dynamic proteins mediating a wide range of protein–protein and protein–nucleic acid interactions, on the whole acting as a multipurpose molecular scaffold. Overall, significant steps toward appreciating the role of DBHS proteins have been made, but we are only beginning to understand the complexity and broader importance of this family in cellular biology. PMID:27084935

  2. Sweat Rates During Continuous and Interval Aerobic Exercise: Implications for NASA Multipurpose Crew Vehicle (MPCV) Missions

    NASA Technical Reports Server (NTRS)

    Ryder, Jeffrey W.; Scott, Jessica; Ploutz-Snyder, Robert; Ploutz-Snyder, Lori L.

    2016-01-01

    Aerobic deconditioning is one of the effects spaceflight. Impaired crewmember performance due to loss of aerobic conditioning is one of the risks identified for mitigation by the NASA Human Research Program. Missions longer than 8 days will involve exercise countermeasures including those aimed at preventing the loss of aerobic capacity. The NASA Multipurpose Crew Vehicle (MPCV) will be NASA's centerpiece architecture for human space exploration beyond low Earth orbit. Aerobic exercise within the small habitable volume of the MPCV is expected to challenge the ability of the environmental control systems, especially in terms of moisture control. Exercising humans contribute moisture to the environment by increased respiratory rate (exhaling air at 100% humidity) and sweat. Current acceptable values are based on theoretical models that rely on an "average" crew member working continuously at 75% of their aerobic capacity (Human Systems Integration Requirements Document). Evidence suggests that high intensity interval exercise for much shorter durations are equally effective or better in building and maintaining aerobic capacity. This investigation will examine sweat and respiratory rates for operationally relevant continuous and interval aerobic exercise protocols using a variety of different individuals. The results will directly inform what types of aerobic exercise countermeasures will be feasible to prescribe for crewmembers aboard the MPCV.

  3. A multi-purpose open-source triggering platform for magnetic resonance

    NASA Astrophysics Data System (ADS)

    Ruytenberg, T.; Webb, A. G.; Beenakker, J. W. M.

    2014-10-01

    Many MR scans need to be synchronised with external events such as the cardiac or respiratory cycles. For common physiological functions commercial trigger equipment exists, but for more experimental inputs these are not available. This paper describes the design of a multi-purpose open-source trigger platform for MR systems. The heart of the system is an open-source Arduino Due microcontroller. This microcontroller samples an analogue input and digitally processes these data to determine the trigger. The output of the microcontroller is programmed to mimic a physiological signal which is fed into the electrocardiogram (ECG) or pulse oximeter port of MR scanner. The microcontroller is connected to a Bluetooth dongle that allows wireless monitoring and control outside the scanner room. This device can be programmed to generate a trigger based on various types of input. As one example, this paper describes how it can be used as an acoustic cardiac triggering unit. For this, a plastic stethoscope is connected to a microphone which is used as an input for the system. This test setup was used to acquire retrospectively-triggered cardiac scans in ten volunteers. Analysis showed that this platform produces a reliable trigger (>99% triggers are correct) with a small average 8 ms variation between the exact trigger points.

  4. The multipurpose time-of-flight neutron reflectometer “Platypus” at Australia's OPAL reactor

    NASA Astrophysics Data System (ADS)

    James, M.; Nelson, A.; Holt, S. A.; Saerbeck, T.; Hamilton, W. A.; Klose, F.

    2011-03-01

    In this manuscript we describe the major components of the Platypus time-of-flight neutron reflectometer at the 20 MW OPAL reactor in Sydney, Australia. Platypus is a multipurpose spectrometer for the characterisation of solid thin films, materials adsorbed at the solid-liquid interface and free-liquid surfaces. It also has the capacity to study magnetic thin films using spin-polarised neutrons. Platypus utilises a white neutron beam ( λ=2-20 Å) that is pulsed using boron-coated disc chopper pairs; thus providing the capacity to tailor the wavelength resolution of the pulses to suit the system under investigation. Supermirror optical components are used to focus, deflect or spin-polarise the broad bandwidth neutron beams, and typical incident spectra are presented for each configuration. A series of neutron reflectivity datasets are presented, indicating the quality and flexibility of this spectrometer. Minimum reflectivity values of <10 -7 are observed; while maximum thickness values of 325 nm have been measured for single-component films and 483 nm for a multilayer system. Off-specular measurements have also been made to investigate in-plane features as opposed to those normal to the sample surface. Finally, the first published studies conducted using the Platypus time-of-flight neutron reflectometer are presented.

  5. Application of a multipurpose unequal probability stream survey in the Mid-Atlantic Coastal Plain

    USGS Publications Warehouse

    Ator, S.W.; Olsen, A.R.; Pitchford, A.M.; Denver, J.M.

    2003-01-01

    A stratified, spatially balanced sample with unequal probability selection was used to design a multipurpose survey of headwater streams in the Mid-Atlantic Coastal Plain. Objectives for the survey include unbiased estimates of regional stream conditions, and adequate coverage of unusual but significant environmental settings to support empirical modeling of the factors affecting those conditions. The design and field application of the survey are discussed in light of these multiple objectives. A probability (random) sample of 175 first-order nontidal streams was selected for synoptic sampling of water chemistry and benthic and riparian ecology during late winter and spring 2000. Twenty-five streams were selected within each of seven hydrogeologic subregions (strata) that were delineated on the basis of physiography and surficial geology. In each subregion, unequal inclusion probabilities were used to provide an approximately even distribution of streams along a gradient of forested to developed (agricultural or urban) land in the contributing watershed. Alternate streams were also selected. Alternates were included in groups of five in each subregion when field reconnaissance demonstrated that primary streams were inaccessible or otherwise unusable. Despite the rejection and replacement of a considerable number of primary streams during reconnaissance (up to 40 percent in one subregion), the desired land use distribution was maintained within each hydrogeologic subregion without sacrificing the probabilistic design.

  6. Myrrha, a Multipurpose Accelerator Driven System for R&d - Present Status

    NASA Astrophysics Data System (ADS)

    D'Hondt, P.; Aït Abderrahim, H.; Kupschus, P.; Benoit, P.; Malambu, E.; Sobolev, V.; Aoust, T.; van Tichelen, K.; Arien, B.; Vermeersch, F.; de Bruyn, D.; Maes, D.; Haeck, W.; Jongen, Y.; Vandeplassche, D.

    2004-02-01

    Since 1998, SCK•CEN in partnership with IBA s.a., is designing a multipurpose ADS for R&D applications -MYRRHA - and is conducting an associated R&D support programme. MYRRHA is an Accelerator Driven System (ADS) under development at Mol in Belgium and aiming to serve as a basis for the European experimental ADS to provide protons and neutrons for various R&D applications. It consists of a proton accelerator delivering a 350 MeV*5 mA proton beam to a liquid Pb-Bi spallation target that in turn couples to a Pb-Bi cooled, subcritical fast core. In a first stage, the project focuses mainly on demonstration of the ADS concept, safety research on sub-critical systems and nuclear waste transmutation studies. In a later stage, the device will also be dedicated to research on structural materials, nuclear fuel, liquid metal technology and associated aspects and on sub-critical reactor physics. Subsequently, it will be used for research on applications such as radioisotope production. The MYRRHA system is expected to become a major research infrastructure for the European partners involved in the P&T and ADS Demo development.

  7. Subjective and objective measures of corneal staining related to multipurpose care systems.

    PubMed

    Pritchard, Nicola; Young, Graeme; Coleman, Sarah; Hunt, Chris

    2003-03-01

    An objective, digital-imaging method of measuring corneal staining was evaluated in 24 subjects wearing soft contact lenses. The method was used to compare the clinical performance of common multipurpose care systems (MPS) for soft contact lens care. Subjects used three different MPS, one containing polyquaternium-1 (PQ) and two containing polyhexanide (PX1 and PX2), for 2 weeks in a randomised, single-masked (investigator) crossover study. Corneal staining induced with the three MPS was analysed using an image-processing program (ImageTool, UTHSCSA Version 2, University of Texas, USA). Conjunctival hyperaemia and papillae were also evaluated. The intraclass correlation coefficient was similar with image analysis to that of investigator grading (0.876, 0.879, respectively). Significant differences in staining response were detected using the objective method. There was significantly less staining area with polyquaternium-1 (PQ) than polyhexanide (PQ: 0.12 mm(2), PX2: 0.91 mm(2)). Inferior palpebral papillae were significantly greater with PX2 than with PQ (1.0, 0.7 (0-4), respectively). The technique was shown to be an effective method of evaluating different corneal staining responses. Bilateral corneal staining in three or more quadrants is useful in the diagnosis of MPS-related staining.

  8. Performance of Three Multipurpose Disinfecting Solutions with a Silicone Hydrogel Contact Lens

    PubMed Central

    García-Porta, Nery; Rico-del-Viejo, Laura; Ferreira-Neves, Helena; Peixoto-de-Matos, Sofia C.; Queirós, Antonio; González-Méijome, José M.

    2015-01-01

    Purpose. To evaluate the clinical performance of a silicone hydrogel (Si-Hy) soft contact lens (CL) in combination with three different multipurpose disinfecting solutions (MPDSs). Methods. This was a prospective, randomized, single-masked, crossover, and comparative study in which 31 habitual soft CL wearers were randomly assigned to one of the three MPDSs (Synergi, COMPLETE RevitaLens, and OPTI-FREE PureMoist) for 1 month with a 1-week wash-out period between each exposure. All subjects were successfully refitted with a Si-Hy CL (Biofinity). Subjects were then scheduled for follow-up visits after 1 month of lens wear, being evaluated at 2 and 8 hours after lens insertion. Visual Analogue Scales (VAS) were used to gauge comfort rating. Results. The tarsal conjunctiva showed a significantly different degree of lid redness between the MPDSs at the 2-hour visit (P < 0.05, Kruskal-Wallis test), being lower for COMPLETE RevitaLens compared to the other two MPDSs (Mann-Whitney U test). Furthermore, a significantly different degree of lid roughness at the 8-hour visit was seen (P < 0.05, Kruskal-Wallis test), being higher for Synergi (Mann-Whitney U test). The subjective comfort was similar with the three MPDSs. Conclusion. Tarsal conjunctival response should be also considered in the context of the clinical performance of MPDs at the ocular surface. PMID:25918703

  9. Software-programmable continuous-flow multi-purpose lab-on-a-chip.

    PubMed

    Amin, Ahmed M; Thakur, Raviraj; Madren, Seth; Chuang, Han-Sheng; Thottethodi, Mithuna; Vijaykumar, T N; Wereley, Steven T; Jacobson, Stephen C

    2013-11-01

    Current lab-on-a-chip (LoC) devices are assay-specific and are custom-built for each single experiment. Performing an experiment requires scientists or engineers to go through the time-consuming process of designing, fabricating, and testing a chip before conducting the actual experiment. This prolonged cycle can take months to complete, increasing effort and cost and reducing productivity. Similarly, minor modifications to an assay protocol re-incur the overheads of the design cycle. In this paper, we develop a multi-purpose, software-programmableLab-on-a-Chip (SPLoC), where the user simply writes or downloads a program for each experiment. We describe the components necessary to realize the SPLoC, which include a high-level programming language, an abstract instruction set, a runtime and control system, and a microfluidic device. We describe two key features of our high-level language compiler, and describe a novel variable-volume variable-ratio mixer. Finally, we demonstrate our SPLoC on four diverse, real-world assays.

  10. A multipurpose quality assurance phantom for the small animal radiation research platform (SARRP)

    NASA Astrophysics Data System (ADS)

    Ngwa, Wilfred; Tsiamas, Panagiotis; Zygmanski, Piotr; Makrigiorgos, G. Mike; Berbeco, Ross I.

    2012-05-01

    In this work, the suitability and performance of a mouse-size MOSFET (Mousefet) phantom is investigated for routine quality assurance (QA) of the small animal radiation research platform (SARRP). This Mousefet phantom is a simple construction consisting of five micro-MOSFETS custom integrated in a quincunx pattern within a tissue-equivalent phantom, allowing repeat/multiple QA tasks to be quickly performed in one experimental set-up. The Mousefet phantom is particularly evaluated for facilitating SARRP QA tasks which may warrant daily evaluation, including output constancy, isocenter congruency test and cone beam computed tomography (CBCT) image geometric accuracy. Results for the output constancy measurements showed a maximum daily variation of less than 2.6% for all MOSFETS, in consonance with observations from concurrent ion chamber measurements. It is also shown that the design of the Mousefet phantom allows the output check data to be used for prompt verification of beam energy and cone profile constancy. For the isocenter congruency test, it is demonstrated that the Mousefet phantom can detect 0.3 mm deviations of the CBCT isocenter from the radiation isocenter. Meanwhile, results for CBCT image geometric accuracy were consistently found to be within 2% of the expected value. Other CBCT image quality parameters could also be assessed in terms of image intensity constancy, noise and image uniformity. Overall, the results establish the Mousefet phantom as a simple and time-efficient multipurpose tool that could be employed effectively for routine QA of the SARRP.

  11. A multi-purpose open-source triggering platform for magnetic resonance.

    PubMed

    Ruytenberg, T; Webb, A G; Beenakker, J W M

    2014-10-01

    Many MR scans need to be synchronised with external events such as the cardiac or respiratory cycles. For common physiological functions commercial trigger equipment exists, but for more experimental inputs these are not available. This paper describes the design of a multi-purpose open-source trigger platform for MR systems. The heart of the system is an open-source Arduino Due microcontroller. This microcontroller samples an analogue input and digitally processes these data to determine the trigger. The output of the microcontroller is programmed to mimic a physiological signal which is fed into the electrocardiogram (ECG) or pulse oximeter port of MR scanner. The microcontroller is connected to a Bluetooth dongle that allows wireless monitoring and control outside the scanner room. This device can be programmed to generate a trigger based on various types of input. As one example, this paper describes how it can be used as an acoustic cardiac triggering unit. For this, a plastic stethoscope is connected to a microphone which is used as an input for the system. This test setup was used to acquire retrospectively-triggered cardiac scans in ten volunteers. Analysis showed that this platform produces a reliable trigger (>99% triggers are correct) with a small average 8 ms variation between the exact trigger points.

  12. Neural network predictions of acoustical parameters in multi-purpose performance halls.

    PubMed

    Cheung, L Y; Tang, S K

    2013-09-01

    A detailed binaural sound measurement was carried out in two multi-purpose performance halls of different seating capacities and designs in Hong Kong in the present study. The effectiveness of using neural network in the predictions of the acoustical properties using a limited number of measurement points was examined. The root-mean-square deviation from measurements, statistical parameter distribution matching, and the results of a t-test for vanishing mean difference between simulations and measurements were adopted as the evaluation criteria for the neural network performance. The audience locations relative to the sound source were used as the inputs to the neural network. Results show that the neural network training scheme using nine uniformly located measurement points in each specific hall area is the best choice regardless of the hall setting and design. It is also found that the neural network prediction of hall spaciousness does not require a large amount of training data, but the accuracy of the reverberance related parameter predictions increases with increasing volume of training data.

  13. Amoebicidal efficacy of a novel multi-purpose disinfecting solution: first findings.

    PubMed

    Ustüntürk, Miray; Zeybek, Zuhal

    2014-11-01

    Free-living amoebae of the genus Acanthamoeba can cause a sight-threatening corneal infection, Acanthamoeba keratitis, mostly in contact lens wearers. The use of ineffective contact lens disinfecting solutions is one of the most important risk factors for this infection. This study concerns a new multi-purpose contact lens disinfecting solution, OPTI-FREE® PureMoist®, tested for its efficacy against Acanthamoeba trophozoites and cysts by using the most probable number technique for amoebic enumeration. Acanthamoeba castellanii ATCC 50373 and an environmental strain of Acanthamoeba genotype T4 isolated from tap water in Istanbul were used during the experiments. OPTI-FREE® PureMoist® achieved total kill (more than a 3-log reduction) of trophozoites of both strains before the manufacturer-recommended disinfection time (6h). In contrast, this solution had limited cysticidal activity against the ATCC strain but more against the environmental strain, with log reductions of 0.75 and 2.20, respectively, after 6h of exposure.

  14. Development of flaw acceptance criteria for aging management of spent nuclear fuel multi-purpose canisters

    SciTech Connect

    Lam, Poh -Sang; Sindelar, Robert L.

    2015-03-09

    A typical multipurpose canister (MPC) is made of austenitic stainless steel and is loaded with spent nuclear fuel assemblies. The canister may be subject to service-induced degradation when it is exposed to aggressive atmospheric environments during a possibly long-term storage period if the permanent repository is yet to be identified and readied. Because heat treatment for stress relief is not required for the construction of an MPC, stress corrosion cracking may be initiated on the canister surface in the welds or in the heat affected zone. An acceptance criteria methodology is being developed for flaw disposition should the crack-like defects be detected by periodic in-service Inspection. The first-order instability flaw sizes has been determined with bounding flaw configurations, that is, through-wall axial or circumferential cracks, and part-through-wall long axial flaw or 360° circumferential crack. The procedure recommended by the American Petroleum Institute (API) 579 Fitness-for-Service code (Second Edition) is used to estimate the instability crack length or depth by implementing the failure assessment diagram (FAD) methodology. The welding residual stresses are mostly unknown and are therefore estimated with the API 579 procedure. It is demonstrated in this paper that the residual stress has significant impact on the instability length or depth of the crack. The findings will limit the applicability of the flaw tolerance obtained from limit load approach where residual stress is ignored and only ligament yielding is considered.

  15. Development of the MRPC for the TOF system of the MultiPurpose Detector

    NASA Astrophysics Data System (ADS)

    Babkin, V. A.; Bazylev, S. N.; Burdenyuk, I. S.; Buryakov, M. G.; Dmitriev, A. V.; Dulov, P. O.; Golovatyuk, V. M.; Lobastov, S. P.; Rumyantsev, M. M.; Schipunov, A. V.; Shutov, A. V.; Slepnev, I. V.; Slepnev, V. M.; Terletskiy, A. V.; Volgin, S. V.

    2016-06-01

    The Multipurpose Detector (MPD) [1] is designed to study of hot and dense baryonic matter in collisions of heavy ions over the atomic mass range 1–197 at the centre of mass energy up to √SNN = 11 GeV (for Au79+). The MPD experiment will be carried out at the JINR accelerator complex NICA [2] which is under construction. The barrel part of the MPD consists of various detectors surrounding the interaction point. It includes a precise tracking system (time projection chamber (TPC) and silicon inner tracker (IT)) and high-performance particle identification system based on time-of-flight (TOF) and calorimeter (ECal). The triple-stack multigap resistive plate chamber is chosen as an active element of the TOF. It provides good time resolution and long term stability. This article presents parameters of the MRPC obtained using the deuteron beam of JINR accelerator Nuclotron. The time resolution is 0~4 ps with efficiency of 99%. Rate capability studies resulted with a time resolution of 60 ps and efficiency higher than 90% on the beam with particle flux densities up to 2 kHz/cm2.

  16. Feasibility study for a DOE research and production fuel multipurpose canister

    SciTech Connect

    Lopez, D.A.; Abbott, D.G.

    1994-02-01

    This is a report of the feasibility of multipurpose canisters for transporting, storing, and sing of Department of Energy research and production spent nuclear fuel. Six representative Department of Energy fuel assemblies were selected, and preconceptual canister designs were developed to accommodate these assemblies. The study considered physical interface, structural adequacy, criticality safety, shielding capability, thermal performance of the canisters, and fuel storage site infrastructure. The external envelope of the canisters was designed to fit within the overpack casks for commercial canisters being developed for the Department of Energy Office of Civilian Radioactive Waste Management. The budgetary cost of canisters to handle all fuel considered is estimated at $170.8M. One large conceptual boiling water reactor canister design, developed for the Office of Civilian Radioactive Waste Management, and two new canister designs can accommodate at least 85% of the volume of the Department of Energy fuel considered. Canister use minimizes public radiation exposure and is cost effective compared with bare fuel handling. Results suggest the need for additional study of issues affecting canister use and for conceptual design development of the three canisters.

  17. Evaluation of Suited and Unsuited Human Functional Strength Using Multipurpose, Multiaxial Isokinetic Dynamometer

    NASA Technical Reports Server (NTRS)

    Aghazadeh, Fred

    2005-01-01

    The objective of the planned summer research was to develop a procedure to determine the isokinetic functional strength of suited and unsuited participants in order to estimate the coefficient of micro-gravity suit on human strength. To accomplish this objective, the Anthropometry and Biomechanics Facility's Multipurpose, Multiaxial Isokinetic dynamometer (MMID) was used. Development of procedure involved selection and testing of seven routines to be tested on MMID. We conducted the related experiments and collected the data for 12 participants. In addition to the above objective, we developed a procedure to assess the fatiguing characteristics of suited and unsuited participants using EMG technique. We collected EMG data on 10 participants while performing a programmed routing on MMID. EMG data along with information on the exerted forces, effector speed, number of repetitions, and duration of each routine were recorded for further analysis. Finally, gathering and tabulation Of data for various human strengths for updating of MSIS (HSIS) strength requirement, which started in summer 2003, also continued.

  18. Serum insensitive, intranuclear protein delivery by the multipurpose cationic lipid SAINT-2.

    PubMed

    van der Gun, Bernardina T F; Monami, Amélie; Laarmann, Sven; Raskó, Tamás; Slaska-Kiss, Krystyna; Weinhold, Elmar; Wasserkort, Reinhold; de Leij, Lou F M H; Ruiters, Marcel H J; Kiss, Antal; McLaughlin, Pamela M J

    2007-11-20

    Cationic liposomal compounds are widely used to introduce DNA and siRNA into viable cells, but none of these compounds are also capable of introducing proteins. Here we describe the use of a cationic amphiphilic lipid SAINT-2:DOPE for the efficient delivery of proteins into cells (profection). Labeling studies demonstrated equal delivery efficiency for protein as for DNA and siRNA. Moreover, proteins complexed with Saint-2:DOPE were successfully delivered, irrespective of the presence of serum, and the profection efficiency was not influenced by the size or the charge of the protein:cationic liposomal complex. Using beta-galactosidase as a reporter protein, enzymatic activity was detected in up to 98% of the adherent cells, up to 83% of the suspension cells and up to 70% of the primary cells after profection. A delivered antibody was detected in the cytoplasm for up to 7 days after profection. Delivery of the methyltransferase M.SssI resulted in DNA methylation, leading to a decrease in E-cadherin expression. The lipid-mediated multipurpose transport system reported here can introduce proteins into the cell with an equal delivery efficiency as for nucleotides. Delivery is irrespective of the presence of serum, and the protein can exert its function both in the cytoplasm and in the nucleus. Furthermore, DNA methylation by M.SssI delivery as a novel tool for gene silencing has potential applications in basic research and therapy. PMID:17884225

  19. WND-CHARM: Multi-purpose image classification using compound image transforms

    PubMed Central

    Orlov, Nikita; Shamir, Lior; Macura, Tomasz; Johnston, Josiah; Eckley, D. Mark; Goldberg, Ilya G.

    2008-01-01

    We describe a multi-purpose image classifier that can be applied to a wide variety of image classification tasks without modifications or fine-tuning, and yet provide classification accuracy comparable to state-of-the-art task-specific image classifiers. The proposed image classifier first extracts a large set of 1025 image features including polynomial decompositions, high contrast features, pixel statistics, and textures. These features are computed on the raw image, transforms of the image, and transforms of transforms of the image. The feature values are then used to classify test images into a set of pre-defined image classes. This classifier was tested on several different problems including biological image classification and face recognition. Although we cannot make a claim of universality, our experimental results show that this classifier performs as well or better than classifiers developed specifically for these image classification tasks. Our classifier’s high performance on a variety of classification problems is attributed to (i) a large set of features extracted from images; and (ii) an effective feature selection and weighting algorithm sensitive to specific image classification problems. The algorithms are available for free download from openmicroscopy.org. PMID:18958301

  20. Multipurpose ultra and superhydrophobic surfaces based on oligodimethylsiloxane-modified nanosilica.

    PubMed

    de Francisco, Raquel; Tiemblo, Pilar; Hoyos, Mario; González-Arellano, Camino; García, Nuria; Berglund, Lars; Synytska, Alla

    2014-11-12

    Nonfluorinated hydrophobic surfaces are of interest for reduced cost, toxicity, and environmental problems. Searching for such surfaces together with versatile processing, A200 silica nanoparticles are modified with an oligodimethylsiloxane and used by themselves or with a polymer matrix. The goal of the surface modification is controlled aggregate size and stable suspensions. Characterization is done by NMR, microanalysis, nitrogen adsorption, and dynamic light scattering. The feasibility of the concept is then demonstrated. The silica aggregates are sprayed in a scalable process to form ultrahydrophobic and imperceptible coatings with surface topographies of controlled nanoscale roughness onto different supports, including nanofibrillated cellulose. To improve adhesion and wear properties, the organosilica was mixed with polymers. The resulting composite coatings are characterized by FE-SEM, AFM, and contact angle measurements. Depending on the nature of the polymer, different functionalities can be developed. Poly(methyl methacrylate) leads to almost superhydrophobic and highly transparent coatings. Composites based on commercial acrylic car paint show "pearl-bouncing" droplet behavior. A light-emitting polyfluorene is synthesized to prepare luminescent and water repellent coatings on different supports. The interactions between polymers and the organosilica influence coating roughness and are critical for wetting behavior. In summary, the feasibility of a facile, rapid, and fluorine-free hydrophobization concept was successfully demonstrated in multipurpose antiwetting applications. PMID:25275966

  1. Multipurpose ultra and superhydrophobic surfaces based on oligodimethylsiloxane-modified nanosilica.

    PubMed

    de Francisco, Raquel; Tiemblo, Pilar; Hoyos, Mario; González-Arellano, Camino; García, Nuria; Berglund, Lars; Synytska, Alla

    2014-11-12

    Nonfluorinated hydrophobic surfaces are of interest for reduced cost, toxicity, and environmental problems. Searching for such surfaces together with versatile processing, A200 silica nanoparticles are modified with an oligodimethylsiloxane and used by themselves or with a polymer matrix. The goal of the surface modification is controlled aggregate size and stable suspensions. Characterization is done by NMR, microanalysis, nitrogen adsorption, and dynamic light scattering. The feasibility of the concept is then demonstrated. The silica aggregates are sprayed in a scalable process to form ultrahydrophobic and imperceptible coatings with surface topographies of controlled nanoscale roughness onto different supports, including nanofibrillated cellulose. To improve adhesion and wear properties, the organosilica was mixed with polymers. The resulting composite coatings are characterized by FE-SEM, AFM, and contact angle measurements. Depending on the nature of the polymer, different functionalities can be developed. Poly(methyl methacrylate) leads to almost superhydrophobic and highly transparent coatings. Composites based on commercial acrylic car paint show "pearl-bouncing" droplet behavior. A light-emitting polyfluorene is synthesized to prepare luminescent and water repellent coatings on different supports. The interactions between polymers and the organosilica influence coating roughness and are critical for wetting behavior. In summary, the feasibility of a facile, rapid, and fluorine-free hydrophobization concept was successfully demonstrated in multipurpose antiwetting applications.

  2. A case study: Transforming a vaudeville theatre into a 21st century multi-purpose hall

    NASA Astrophysics Data System (ADS)

    Talaske, Richard H.; Hoffman, Ian B.; Laney, Jonathan P.

    2002-05-01

    Originally constructed in 1927 as an atmospheric, vaudeville theatre, the Coronado enjoyed 50 years as host to a true variety of events. In the 1970s, functional and space limitations became a catalyst for touring events to avoid the Coronado, and the theatre fell into disrepair. In the mid-1990s, a renovation was planned (completed January 2001) to restore the glory of the original theatre and upgrade it to be a viable multi-purpose hall for the 21st century. By annexing two neighboring buildings, many of the space limitations could be overcome in both the front- and back-of-house. The scope included a significantly enlarged stage and stagehouse, performer support spaces, expanded lobby spaces, quiet ventilation systems, and a new music rehearsal room. Acoustically, a primary goal was to upgrade the hall for both reinforced music/theatre performances and unreinforced, orchestral performances. However, historical regulations prevented modification to the room shape and configuration. In order to make the room suitable for unreinforced music, two primary acoustic features were instituted-a semi-custom concert enclosure for the stage and an acoustic enhancement system for the audience chamber. For theatrical and popular music events, a new performance audio system was designed and integrated into the hall.

  3. Subjective and objective measures of corneal staining related to multipurpose care systems.

    PubMed

    Pritchard, Nicola; Young, Graeme; Coleman, Sarah; Hunt, Chris

    2003-03-01

    An objective, digital-imaging method of measuring corneal staining was evaluated in 24 subjects wearing soft contact lenses. The method was used to compare the clinical performance of common multipurpose care systems (MPS) for soft contact lens care. Subjects used three different MPS, one containing polyquaternium-1 (PQ) and two containing polyhexanide (PX1 and PX2), for 2 weeks in a randomised, single-masked (investigator) crossover study. Corneal staining induced with the three MPS was analysed using an image-processing program (ImageTool, UTHSCSA Version 2, University of Texas, USA). Conjunctival hyperaemia and papillae were also evaluated. The intraclass correlation coefficient was similar with image analysis to that of investigator grading (0.876, 0.879, respectively). Significant differences in staining response were detected using the objective method. There was significantly less staining area with polyquaternium-1 (PQ) than polyhexanide (PQ: 0.12 mm(2), PX2: 0.91 mm(2)). Inferior palpebral papillae were significantly greater with PX2 than with PQ (1.0, 0.7 (0-4), respectively). The technique was shown to be an effective method of evaluating different corneal staining responses. Bilateral corneal staining in three or more quadrants is useful in the diagnosis of MPS-related staining. PMID:16303491

  4. Newly Elaborated Multipurpose Polymer Electrolyte Encompassing RTILs for Smart Energy-Efficient Devices.

    PubMed

    Nair, Jijeesh R; Porcarelli, Luca; Bella, Federico; Gerbaldi, Claudio

    2015-06-17

    Profoundly ion-conducting, self-standing, and tack-free ethylene oxide-based polymer electrolytes encompassing a room-temperature ionic liquid (RTIL) with specific amounts of lithium salt are successfully prepared via a rapid and easily upscalable process including a UV irradiation step. All prepared materials are thoroughly characterized in terms of their physical, chemical, and morphological properties and eventually galvanostatically cycled in lab-scale lithium batteries (LIBs) exploiting a novel direct polymerization procedure to get intimate electrode/electrolyte interfacial characteristics. The promising multipurpose characteristics of the newly elaborated materials are demonstrated by testing them in dye-sensitized solar cells (DSSCs), where the introduction of the iodine/iodide-based redox mediator in the polymer matrix assured the functioning of a lab-scale test cell with conversion efficiency exceeding 6% at 1 sun. The reported results enlighten the promising prospects of the material to be successfully implemented as stable, durable, and efficient electrolyte in next-generation energy conversion and storage devices.

  5. Development of the MRPC for the TOF system of the MultiPurpose Detector

    NASA Astrophysics Data System (ADS)

    Babkin, V. A.; Bazylev, S. N.; Burdenyuk, I. S.; Buryakov, M. G.; Dmitriev, A. V.; Dulov, P. O.; Golovatyuk, V. M.; Lobastov, S. P.; Rumyantsev, M. M.; Schipunov, A. V.; Shutov, A. V.; Slepnev, I. V.; Slepnev, V. M.; Terletskiy, A. V.; Volgin, S. V.

    2016-06-01

    The Multipurpose Detector (MPD) [1] is designed to study of hot and dense baryonic matter in collisions of heavy ions over the atomic mass range 1-197 at the centre of mass energy up to √SNN = 11 GeV (for Au79+). The MPD experiment will be carried out at the JINR accelerator complex NICA [2] which is under construction. The barrel part of the MPD consists of various detectors surrounding the interaction point. It includes a precise tracking system (time projection chamber (TPC) and silicon inner tracker (IT)) and high-performance particle identification system based on time-of-flight (TOF) and calorimeter (ECal). The triple-stack multigap resistive plate chamber is chosen as an active element of the TOF. It provides good time resolution and long term stability. This article presents parameters of the MRPC obtained using the deuteron beam of JINR accelerator Nuclotron. The time resolution is 0~4 ps with efficiency of 99%. Rate capability studies resulted with a time resolution of 60 ps and efficiency higher than 90% on the beam with particle flux densities up to 2 kHz/cm2.

  6. Study of structural, electronic and elastic properties of RPd{sub 3} (R = Lu and Sc) compounds

    SciTech Connect

    Thakur, Veena Pagare, Gitanjali Chouhan, S. S.; Sanyal, S. P.

    2014-04-24

    The structural, electronic and elastic properties of nonmagnetic RPd{sub 3} (R = Lu and Sc) compounds, which crystallize in AuCu{sub 3}-type structure, are studied using first principles density functional theory based on full potential linearized augmented plane wave (FP-LAPW) method. The calculations are carried out within the PBE-GGA and WC-GGA for the exchange correlation potential. Our calculated ground state properties such as lattice constant (a0), bulk modulus (B) and its pressure derivative (B’) are in good agreement with the experimental results. We first time predict the elastic constants for these compounds using different approximations of GGA. These RPd{sup 3} compounds are found to be ductile in nature in accordance with Pugh’s criteria. The computed electronic band structures and density of states show metallic character of these compounds.

  7. Differing Evolutionary Histories of the ACTN3*R577X Polymorphism among the Major Human Geographic Groups

    PubMed Central

    Amorim, Carlos Eduardo G.; Acuña-Alonzo, Victor; Salzano, Francisco M.; Bortolini, Maria Cátira; Hünemeier, Tábita

    2015-01-01

    It has been proposed that the functional ACTN3*R577X polymorphism might have evolved due to selection in Eurasian human populations. To test this possibility we surveyed all available population-based data for this polymorphism and performed a comprehensive evolutionary analysis of its genetic diversity, in order to assess the action of adaptive and random mechanisms on its variation across human geographical distribution. The derived 577X allele increases in frequency with distance from Africa, reaching the highest frequencies on the American continent. Positive selection, detected by an extended haplotype homozygosisty test, was consistent only with the Eurasian data, but simulations with neutral models could not fully explain the results found in the American continent. It is possible that particularities of Native American population structure could be responsible for the observed allele frequencies, which would have resulted from a complex interaction between selective and random factors. PMID:25706920

  8. Dimorphism of RF3 ( R = La-Nd) crystals based on the data of X-ray diffraction studies

    NASA Astrophysics Data System (ADS)

    Bolotina, N. B.; Chernaya, T. S.; Verin, I. A.; Khrykina, O. N.; Sobolev, B. P.

    2016-01-01

    The ratio of two forms of tysonite in nominally pure single crystals of RF3 ( R = La-Nd) obtained from melts under identical conditions (the as-grown state) is studied for the first time by X-ray diffraction. Crystals of RF3 with R = La-Nd belong to the β-LaF3 structural type (space group Pbar 3c1, Z = 6) and form twins. Samples 0.2-0.4 in diameter contain inclusions of the high-temperature a form (space group P63/ mmc, Z = 2). It is shown that twinning and dimorphism of the RF3 crystals ( R = La-Nd) have a common structural basis.

  9. An Arabic dictionary of technical alchemical terms: MS Sprenger 1908 of the Staatsbibliothek zu Berlin (fols. 3r-6r).

    PubMed

    Ferrario, Gabriele

    2009-03-01

    The Arabic MS Sprenger 1908 (Staatsbibliothek, Berlin) is a handbook of medieval alchemy. Among the works it preserves, we can find the only extant witness to the Arabic original of the well-known Liber de aluminibus et salibus. In this paper, I focus on a detailed alchemical dictionary preserved in this manuscript (fols. 3r-6r) whose explicit aim is to clarify the meaning of the secret language used by the alchemists to conceal the names of substances and operations. Other versions of the same alchemical lexicon are found in Syriac and karsuni in MSS Oriental 1593 and Egerton 709, both preserved in the British Library. After describing these manuscripts, I analyse the contents of this dictionary, its structure, its different versions, and the features of the alchemical language that it attests to, providing some examples to show how this kind of dictionary is still a useful tool for the contemporary researcher. PMID:19831258

  10. Off-centering of rare-earth ion in (Ba,R)(Ti,Mg)O3 (R = Gd, Dy)

    NASA Astrophysics Data System (ADS)

    Takeda, Shoichi; Yasuda, Satoshi; Moriyoshi, Chikako; Kuroiwa, Yoshihiro; Honda, Atsushi; Inoue, Noriyuki; Higai, Shin'ichi; Ando, Akira

    2016-10-01

    To investigate the off-centering behavior of rare-earth ions that were partially substituted for A site ions in ABO3-type crystals, accurate crystal structure analyses of (Ba,R)(Ti,Mg)O3 (R = Gd, Dy) were performed by high-energy synchrotron radiation X-ray powder diffraction analysis and the maximum entropy method (MEM)/Rietveld method. The R ions were observed at the six equivalent off-center sites in the <100> directions from the corner of a unit cell in the cubic phase. In the tetragonal phase, the R ions occupied one off-center site along the [001] direction. The R off-centering can be attributed to the covalent nature of the bond between the R and O ions in (Ba,R)(Ti,Mg)O3 crystals.

  11. Differing evolutionary histories of the ACTN3*R577X polymorphism among the major human geographic groups.

    PubMed

    Amorim, Carlos Eduardo G; Acuña-Alonzo, Victor; Salzano, Francisco M; Bortolini, Maria Cátira; Hünemeier, Tábita

    2015-01-01

    It has been proposed that the functional ACTN3*R577X polymorphism might have evolved due to selection in Eurasian human populations. To test this possibility we surveyed all available population-based data for this polymorphism and performed a comprehensive evolutionary analysis of its genetic diversity, in order to assess the action of adaptive and random mechanisms on its variation across human geographical distribution. The derived 577X allele increases in frequency with distance from Africa, reaching the highest frequencies on the American continent. Positive selection, detected by an extended haplotype homozygosisty test, was consistent only with the Eurasian data, but simulations with neutral models could not fully explain the results found in the American continent. It is possible that particularities of Native American population structure could be responsible for the observed allele frequencies, which would have resulted from a complex interaction between selective and random factors. PMID:25706920

  12. The fate of the 2√3 × 2√3R(30°) silicene phase on Ag(111)

    SciTech Connect

    Liu, Zhi-Long; Wang, Mei-Xiao; Liu, Canhua E-mail: depadova@ism.cnr.it Jia, Jin-Feng; Vogt, Patrick; Quaresima, Claudio; Ottaviani, Carlo; De Padova, Paola E-mail: depadova@ism.cnr.it; Olivieri, Bruno; Lay, Guy Le E-mail: depadova@ism.cnr.it

    2014-09-01

    Silicon atoms deposited on Ag(111) produce various single layer silicene sheets with different buckling patterns and periodicities. Low temperature scanning tunneling microscopy reveals that one of the silicene sheets, the hypothetical √7 × √7 silicene structure, on 2√3 × 2√3 Ag(111), is inherently highly defective and displays no long-range order. Moreover, Auger and photoelectron spectroscopy measurements reveal its sudden death, to end, in a dynamic fating process at ∼300 °C. This result clarifies the real nature of the 2√3 × 2√3R(30°) silicene phase and thus helps to understand the diversity of the silicene sheets grown on Ag(111)

  13. Effects of an H3R antagonist on the animal model of autism induced by prenatal exposure to valproic acid.

    PubMed

    Baronio, Diego; Castro, Kamila; Gonchoroski, Taylor; de Melo, Gabriela Mueller; Nunes, Gustavo Della Flora; Bambini-Junior, Victorio; Gottfried, Carmem; Riesgo, Rudimar

    2015-01-01

    Autism spectrum disorders (ASD) are a group of neurodevelopmental disorders primarily characterized by impaired social interaction and communication, and by restricted repetitive behaviors and interests. Ligands of histamine receptor 3 (H3R) are considered potential therapeutic agents for the treatment of different brain disorders and cognitive impairments. Considering this, the aim of the present study is to evaluate the actions of ciproxifan (CPX), an H3R antagonist, on the animal model of autism induced by prenatal exposure to valproic acid (VPA). Swiss mice were prenatally exposed to VPA on embryonic day 11 and assessed for social behavior, nociceptive threshold and repetitive behavior at 50 days of life. The treatment with CPX (3 mg/kg) or saline was administered 30 minutes before each behavioral test. The VPA group presented lower sociability index compared to VPA animals that were treated with CPX. Compared to the Control group, VPA animals presented a significantly higher nociceptive threshold, and treatment with CPX was not able to modify this parameter. In the marble burying test, the number of marbles buried by VPA animals was consistent with markedly repetitive behavior. VPA animals that received CPX buried a reduced amount of marbles. In summary, we report that an acute dose of CPX is able to attenuate sociability deficits and stereotypies present in the VPA model of autism. Our findings have the potential to help the investigations of both the molecular underpinnings of ASD and of possible treatments to ameliorate the ASD symptomatology, although more research is still necessary to corroborate and expand this initial data.

  14. Effects of an H3R Antagonist on the Animal Model of Autism Induced by Prenatal Exposure to Valproic Acid

    PubMed Central

    Baronio, Diego; Castro, Kamila; Gonchoroski, Taylor; de Melo, Gabriela Mueller; Nunes, Gustavo Della Flora; Bambini-Junior, Victorio; Gottfried, Carmem; Riesgo, Rudimar

    2015-01-01

    Autism spectrum disorders (ASD) are a group of neurodevelopmental disorders primarily characterized by impaired social interaction and communication, and by restricted repetitive behaviors and interests. Ligands of histamine receptor 3 (H3R) are considered potential therapeutic agents for the treatment of different brain disorders and cognitive impairments. Considering this, the aim of the present study is to evaluate the actions of ciproxifan (CPX), an H3R antagonist, on the animal model of autism induced by prenatal exposure to valproic acid (VPA). Swiss mice were prenatally exposed to VPA on embryonic day 11 and assessed for social behavior, nociceptive threshold and repetitive behavior at 50 days of life. The treatment with CPX (3 mg/kg) or saline was administered 30 minutes before each behavioral test. The VPA group presented lower sociability index compared to VPA animals that were treated with CPX. Compared to the Control group, VPA animals presented a significantly higher nociceptive threshold, and treatment with CPX was not able to modify this parameter. In the marble burying test, the number of marbles buried by VPA animals was consistent with markedly repetitive behavior. VPA animals that received CPX buried a reduced amount of marbles. In summary, we report that an acute dose of CPX is able to attenuate sociability deficits and stereotypies present in the VPA model of autism. Our findings have the potential to help the investigations of both the molecular underpinnings of ASD and of possible treatments to ameliorate the ASD symptomatology, although more research is still necessary to corroborate and expand this initial data. PMID:25560049

  15. Gain of function AMP-activated protein kinase γ3 mutation (AMPKγ3R200Q) in pig muscle increases glycogen storage regardless of AMPK activation.

    PubMed

    Scheffler, Tracy L; Park, Sungkwon; Roach, Peter J; Gerrard, David E

    2016-06-01

    Chronic activation of AMP-activated protein kinase (AMPK) increases glycogen content in skeletal muscle. Previously, we demonstrated that a mutation in the ryanodine receptor (RyR1(R615C)) blunts AMPK phosphorylation in longissimus muscle of pigs with a gain of function mutation in the AMPKγ3 subunit (AMPKγ3(R200Q)); this may decrease the glycogen storage capacity of AMPKγ3(R200Q) + RyR1(R615C) muscle. Therefore, our aim in this study was to utilize our pig model to understand how AMPKγ3(R200Q) and AMPK activation contribute to glycogen storage and metabolism in muscle. We selected and bred pigs in order to generate offspring with naturally occurring AMPKγ3(R200Q), RyR1(R615C), and AMPKγ3(R200Q) + RyR1(R615C) mutations, and also retained wild-type littermates (control). We assessed glycogen content and parameters of glycogen metabolism in longissimus muscle. Regardless of RyR1(R615C), AMPKγ3(R200Q) increased the glycogen content by approximately 70%. Activity of glycogen synthase (GS) without the allosteric activator glucose 6-phosphate (G6P) was decreased in AMPKγ3(R200Q) relative to all other genotypes, whereas both AMPKγ3(R200Q) and AMPKγ3(R200Q) + RyR1(R615C) muscle exhibited increased GS activity with G6P. Increased activity of GS with G6P was not associated with increased abundance of GS or hexokinase 2. However, AMPKγ3(R200Q) enhanced UDP-glucose pyrophosphorylase 2 (UGP2) expression approximately threefold. Although UGP2 is not generally considered a rate-limiting enzyme for glycogen synthesis, our model suggests that UGP2 plays an important role in increasing flux to glycogen synthase. Moreover, we have shown that the capacity for glycogen storage is more closely related to the AMPKγ3(R200Q) mutation than activity.

  16. Blockade of NK3R signaling in the PVN decreases vasopressin and oxytocin release and c-Fos expression in the magnocellular neurons in response to hypotension.

    PubMed

    Haley, Gwendolen E; Flynn, Francis W

    2008-10-01

    Tachykinin neurokinin 3 receptor (NK3R) signaling has a broad role in vasopressin (VP) and oxytocin (OT) release. Hydralazine (HDZ)-induced hypotension activates NK3R expressed by magnocellular neurons, increases plasma VP and OT levels, and induces c-Fos expression in VP and OT neurons. Intraventricular pretreatment with the specific NK3R antagonist, SB-222200, eliminates the HDZ-stimulated VP and OT release. NK3R are distributed in the central pathways conveying hypotension information to the magnocellular neurons, and the NK3R antagonist could act anywhere in the pathways. Alternatively, the antagonist could act at the NK3R expressed by the magnocellular neurons. To determine whether blockade of NK3R on magnocellular neurons impairs VP and OT release to HDZ, rats were pretreated with a unilateral PVN injection of 0.15 M NaCl or SB-222200 prior to an intravenous injection of 0.15 M NaCl or HDZ. Blood samples were taken, and brains were processed for VP/c-Fos and OT/c-Fos immunohistochemistry. Intravenous injection of 0.15 M NaCl did not alter plasma hormone levels, and little c-Fos immunoreactivity was present in the PVN. Conversely, intravenous injection of HDZ increased plasma VP and OT levels and c-Fos expression in VP and OT magnocellular neurons. Intra-PVN injection of SB-222200 prior to an intravenous injection of HDZ significantly decreased c-Fos expression in both VP and OT neurons by approximately 70% and attenuated plasma VP and OT levels by 33% and 35%, respectively. Therefore, NK3R signaling in magnocellular neurons has a critical role for the release of VP and OT in response to hypotension.

  17. Calcineurin-NFATc regulates type 2 inositol 1,4,5-trisphosphate receptor (InsP3R2) expression during cardiac remodeling.

    PubMed

    Sankar, Natesan; deTombe, Pieter P; Mignery, Gregory A

    2014-02-28

    In heart, the type 2 inositol 1,4,5-triphosphate receptor (InsP3R2) is the predominant isoform expressed and is localized in the nuclear membrane of ventricular myocytes. InsP3R2-mediated Ca(2+) release regulates hypertrophy specific gene expression by modulating CaMKIIδ, histone deacetylase, and calcineurin-NFATc signaling pathways. InsP3R2 protein is a hypertrophy specific marker and is overexpressed in heart failure animal models and in humans. However, the regulation of InsP3R2 mRNA and protein expression during cardiac hypertrophy and heart failure is not known. Here we show the transcriptional regulation of the Itpr2 gene in adult cardiomyocytes. Our data demonstrates that, InsP3R2 mRNA and protein expression is activated by hypertrophic agonists and attenuated by InsP3R inhibitors 2-aminoethoxyldiphenyl borate and xestospongin-C. The Itpr2 promoter is regulated by the calcineurin-NFATc signaling pathway. NFATc1 regulates Itpr2 gene expression by directly binding to the Itpr2 promoter. The calcineurin-NFATc mediated up-regulation of the Itpr2 promoter was attenuated by cyclosporine-A. InsP3R2 mRNA and protein expression was up-regulated in calcineurin-A transgenic mice and in human heart failure. Collectively, our data suggests that ITPR2 and hypertrophy specific gene expression is regulated, in part, by a positive feedback regulation between InsP3R2 and calcineurin-NFATc signaling pathways.

  18. Tumor-specific delivery of BSH-3R for boron neutron capture therapy and positron emission tomography imaging in a mouse brain tumor model.

    PubMed

    Iguchi, Yoshiya; Michiue, Hiroyuki; Kitamatsu, Mizuki; Hayashi, Yuri; Takenaka, Fumiaki; Nishiki, Tei-Ichi; Matsui, Hideki

    2015-07-01

    Glioblastoma, a malignant brain tumor with poor disease outcomes, is managed in modern medicine by multimodality therapy. Boron neutron capture therapy (BNCT) is an encouraging treatment under clinical investigation. In malignant cells, BNCT consists of two major factors: neutron radiation and boron uptake. To increase boron uptake in cells, we created a mercapto-closo-undecahydrododecaborate ([B12HnSH](2-)2Na(+), BSH) fused with a short arginine peptide (1R, 2R, 3R) and checked cellular uptake in vitro and in vivo. In a mouse brain tumor model, only BSH with at least three arginine domains could penetrate cell membranes of glioma cells in vitro and in vivo. Furthermore, to monitor the pharmacokinetic properties of these agents in vivo, we fused BSH and BSH-3R with 1,4,7,10-tetraazacyclododecane-1,4,7,10-tetraacetic acid (DOTA); DOTA is a metal chelating agent for labeling positron emission tomography (PET) probe with (64)Cu. We administered BSH-DOTA-(64)Cu and BSH-3R-DOTA-(64)Cu to the tumor model through a mouse tail vein and determined the drugs' pharmacokinetics by PET imaging. BSH-3R showed a high uptake in the tumor area on PET imaging. We concluded that BSH-3R is the ideal boron compound for clinical use during BNCT and that in developing this compound for clinical use, the BSH-3R PET probe is essential for pharmacokinetic imaging. PMID:25934274

  19. Tumor-specific delivery of BSH-3R for boron neutron capture therapy and positron emission tomography imaging in a mouse brain tumor model.

    PubMed

    Iguchi, Yoshiya; Michiue, Hiroyuki; Kitamatsu, Mizuki; Hayashi, Yuri; Takenaka, Fumiaki; Nishiki, Tei-Ichi; Matsui, Hideki

    2015-07-01

    Glioblastoma, a malignant brain tumor with poor disease outcomes, is managed in modern medicine by multimodality therapy. Boron neutron capture therapy (BNCT) is an encouraging treatment under clinical investigation. In malignant cells, BNCT consists of two major factors: neutron radiation and boron uptake. To increase boron uptake in cells, we created a mercapto-closo-undecahydrododecaborate ([B12HnSH](2-)2Na(+), BSH) fused with a short arginine peptide (1R, 2R, 3R) and checked cellular uptake in vitro and in vivo. In a mouse brain tumor model, only BSH with at least three arginine domains could penetrate cell membranes of glioma cells in vitro and in vivo. Furthermore, to monitor the pharmacokinetic properties of these agents in vivo, we fused BSH and BSH-3R with 1,4,7,10-tetraazacyclododecane-1,4,7,10-tetraacetic acid (DOTA); DOTA is a metal chelating agent for labeling positron emission tomography (PET) probe with (64)Cu. We administered BSH-DOTA-(64)Cu and BSH-3R-DOTA-(64)Cu to the tumor model through a mouse tail vein and determined the drugs' pharmacokinetics by PET imaging. BSH-3R showed a high uptake in the tumor area on PET imaging. We concluded that BSH-3R is the ideal boron compound for clinical use during BNCT and that in developing this compound for clinical use, the BSH-3R PET probe is essential for pharmacokinetic imaging.

  20. Laboratory Building.

    SciTech Connect

    Herrera, Joshua M.

    2015-03-01

    This report is an analysis of the means of egress and life safety requirements for the laboratory building. The building is located at Sandia National Laboratories (SNL) in Albuquerque, NM. The report includes a prescriptive-based analysis as well as a performance-based analysis. Following the analysis are appendices which contain maps of the laboratory building used throughout the analysis. The top of all the maps is assumed to be north.

  1. Forward Bay Cover Separation Modeling and Testing for the Orion Multi-Purpose Crew Vehicle

    NASA Technical Reports Server (NTRS)

    Ali, Yasmin; Chuhta, Jesse D.; Hughes, Michael P.; Radke, Tara S.

    2015-01-01

    Spacecraft multi-body separation events during atmospheric descent require complex testing and analysis to validate the flight separation dynamics models used to verify no re-contact. The NASA Orion Multi-Purpose Crew Vehicle (MPCV) architecture includes a highly-integrated Forward Bay Cover (FBC) jettison assembly design that combines parachutes and piston thrusters to separate the FBC from the Crew Module (CM) and avoid re-contact. A multi-disciplinary team across numerous organizations examined key model parameters and risk areas to develop a robust but affordable test campaign in order to validate and verify the FBC separation event for Exploration Flight Test-1 (EFT-1). The FBC jettison simulation model is highly complex, consisting of dozens of parameters varied simultaneously, with numerous multi-parameter interactions (coupling and feedback) among the various model elements, and encompassing distinct near-field, mid-field, and far-field regimes. The test campaign was composed of component-level testing (for example gas-piston thrusters and parachute mortars), ground FBC jettison tests, and FBC jettison air-drop tests that were accomplished by a highly multi-disciplinary team. Three ground jettison tests isolated the testing of mechanisms and structures to anchor the simulation models excluding aerodynamic effects. Subsequently, two air-drop tests added aerodynamic and parachute elements, and served as integrated system demonstrations, which had been preliminarily explored during the Orion Pad Abort-1 (PA-1) flight test in May 2010. Both ground and drop tests provided extensive data to validate analytical models and to verify the FBC jettison event for EFT-1. Additional testing will be required to support human certification of this separation event, for which NASA and Lockheed Martin are applying knowledge from Apollo and EFT-1 testing and modeling to develop a robust human-rated FBC separation event.

  2. Totally implantable total artificial heart and ventricular assist device with multipurpose miniature electromechanical energy system.

    PubMed

    Takatani, S; Orime, Y; Tasai, K; Ohara, Y; Naito, K; Mizuguchi, K; Makinouchi, K; Damm, G; Glueck, J; Ling, J

    1994-01-01

    A multipurpose miniature electromechanical energy system has been developed to yield a compact, efficient, durable, and biocompatible total artificial heart (TAH) and ventricular assist device (VAD). Associated controller-driver electronics were recently miniaturized and converted into hybrid circuits. The hybrid controller consists of a microprocessor and controller, motor driver, Hall sensor, and commutation circuit hybrids. The sizing study demonstrated that all these components can be incorporated in the pumping unit of the TAH and VAD, particularly in the centerpiece of the TAH and the motor housing of the VAD. Both TAH and VAD pumping units will start when their power line is connected to either the internal power pack or the external battery unit. As a redundant driving and diagnostic port, an emergency port was newly added and will be placed in subcutaneous location. In case of system failure, the skin will be cut down, and an external motor drive or a pneumatic driver will be connected to this port to run the TAH. This will minimize the circulatory arrest time. Overall efficiency of the TAH without the transcutaneous energy transmission system was 14-18% to deliver pump outputs of 4-9 L/min against the right and left afterload pressures of 25 and 100 mm Hg. The internal power requirement ranged from 6 to 13 W. The rechargeable batteries such as NiCd or NiMH with 1 AH capacity can run the TAH for 30-45 min. The external power requirement, when TETS efficiency of 75% was assumed, ranged from 8 to 18 W. The accelerated endurance test in the 42 degrees C saline bath demonstrated stable performance over 4 months. Long-term endurance and chronic animal studies will continue toward a system with 5 years durability by the year 2000.

  3. Transcriptomic Analysis of Multipurpose Timber Yielding Tree Neolamarckia cadamba during Xylogenesis Using RNA-Seq.

    PubMed

    Ouyang, Kunxi; Li, Juncheng; Zhao, Xianhai; Que, Qingmin; Li, Pei; Huang, Hao; Deng, Xiaomei; Singh, Sunil Kumar; Wu, Ai-Min; Chen, Xiaoyang

    2016-01-01

    Neolamarckia cadamba is a fast-growing tropical hardwood tree that is used extensively for plywood and pulp production, light furniture fabrication, building materials, and as a raw material for the preparation of certain indigenous medicines. Lack of genomic resources hampers progress in the molecular breeding and genetic improvement of this multipurpose tree species. In this study, transcriptome profiling of differentiating stems was performed to understand N. cadamba xylogenesis. The N. cadamba transcriptome was sequenced using Illumina paired-end sequencing technology. This generated 42.49 G of raw data that was then de novo assembled into 55,432 UniGenes with a mean length of 803.2bp. Approximately 47.8% of the UniGenes (26,487) were annotated against publically available protein databases, among which 21,699 and 7,754 UniGenes were assigned to Gene Ontology categories (GO) and Clusters of Orthologous Groups (COG), respectively. 5,589 UniGenes could be mapped onto 116 pathways using the Kyoto Encyclopedia of Genes and Genomes (KEGG) pathway database. Among 6,202 UniGenes exhibiting differential expression during xylogenesis, 1,634 showed significantly higher levels of expression in the basal and middle stem segments compared to the apical stem segment. These genes included NAC and MYB transcription factors related to secondary cell wall biosynthesis, genes related to most metabolic steps of lignin biosynthesis, and CesA genes involved in cellulose biosynthesis. This study lays the foundation for further screening of key genes associated with xylogenesis in N. cadamba as well as enhancing our understanding of the mechanism of xylogenesis in fast-growing trees. PMID:27438485

  4. Multipurpose furnace for in situ studies of polycrystalline materials using synchrotron radiation

    SciTech Connect

    Sharma, Hemant; Zuidwijk, Thim; Geerlofs, Nico; Offerman, S. Erik; Wattjes, Alix C.; Amirthalingam, Murugaiyan

    2009-12-15

    We report a multipurpose furnace designed for studies using synchrotron radiation on polycrystalline materials, namely, metals, ceramics, and (semi)crystalline polymers. The furnace has been designed to carry out three-dimensional (3D) x-ray diffraction measurements but can also be used for other types of synchrotron radiation research. The furnace has a very low thermal gradient across the specimen (<0.2 degree sign C/mm). Accurate determination of the temperature can be carried out by welding a thermocouple to the specimen. The furnace can be rotated over an angle of 90 degree sign in order to determine the crystallographic orientation of each individual grain. It is possible to follow growth kinetics of all grains in the illuminated volume of the specimen. The specimen environment can be controlled varying from vacuum (up to 10{sup -5} mbar) to gas or air filled. The maximum temperature of operation is 1500 degree sign C, with the possibility of achieving high heating (up to 20 deg. C/s) and cooling rates (up to 30 deg. C/s without quenching gas). 3D maps of the microstructure of the specimen can be generated at elevated temperatures by bringing the high-resolution detector close to the specimen. We show an example of a simulation of the heat affected zone during the thermal cycle of a weld in a transformation-induced plasticity steel carried out using the furnace. The unique characteristics of the furnace open possibility of new fields in materials research using synchrotron radiation.

  5. Reproductive traits affect the rescue of valuable and endangered multipurpose tropical trees.

    PubMed

    Sinébou, Viviane; Quinet, Muriel; Ahohuendo, Bonaventure C; Jacquemart, Anne-Laure

    2016-01-01

    Conservation strategies are urgently needed in Tropical areas for widely used tree species. Increasing numbers of species are threatened by overexploitation and their recovery might be poor due to low reproductive success and poor regeneration rates. One of the first steps in developing any conservation policy should be an assessment of the reproductive biology of species that are threatened by overexploitation. This work aimed to study the flowering biology, pollination and breeding system of V. doniana, a multipurpose threatened African tree, as one step in assessing the development of successful conservation strategies. To this end, we studied (1) traits directly involved in pollinator attraction like flowering phenology, flower numbers and morphology, and floral rewards; (2) abundance, diversity and efficiency of flower visitors; (3) breeding system, through controlled hand-pollination experiments involving exclusion of pollinators and pollen from different sources; and (4) optimal conditions for seed germination. The flowering phenology was asynchronous among inflorescences, trees and sites. The flowers produced a large quantity of pollen and nectar with high sugar content. Flowers attracted diverse and abundant visitors, counting both insects and birds, and efficient pollinators included several Hymenoptera species. We detected no spontaneous self-pollination, indicating a total dependence on pollen vectors. Vitex doniana is self-compatible and no inbreeding depression occurred in the first developmental stages. After extraction of the seed from the fruit, seed germination did not require any particular conditions or pre-treatments and the seeds showed high germination rates. These pollination and breeding characteristics as well as germination potential offer the required conditions to develop successful conservation strategies. Protection, cultivation and integration in agroforestry systems are required to improve the regeneration of the tree. PMID:27354660

  6. The design of the multipurpose Lusi drone. When technology can access harsh environments.

    NASA Astrophysics Data System (ADS)

    Romeo, Giovanni; Di Stefano, Giuseppe; Mazzini, Adriano; Iarocci, Alessandro

    2016-04-01

    Extreme and inaccessible environments are a new frontier that unmanned and remotely operated vehicles can today safely access and monitor. The Lusi mud eruption (NE Java Island, Indonesia) represents one of these harsh environments that are totally unreachable with traditional techniques. Here boiling mud is constantly spewed tens of meters in height and tall gas clouds surround the 100 meters wide active crater. The crater is surrounded by a 600 meters circular zone of hot mud that prevents any approach to investigate and sample the eruption site. In the framework of the Lusi Lab project (ERC grant n° 308126) we assembled and designed a multipurpose drone to survey the eruption site. The Lusi drone is equipped with numerous airborne devices suitable for use on board of other multicopters. During the missions three cameras can complete 1) video survey, 2) high resolution photogrammetry of desired and preselected polygons, and 3) thermal photogrammetry surveys with infra-red camera to locate hot fluids seepage areas or faulted zones. Crater sampling and monitoring operations can be pre-planned with a flight software, and the pilot is required only for take-off and landing. An automatic winch allows the deployment of gas, mud and water samplers and contact thermometers to be operated with no risk for the aircraft. During the winch operations (that can be performed automatically) the aircraft hovers at a safety height until the tasks are completed while being controlled by the winch embedded processor. The drone is also equipped with a GPS connected CO2 and CH4 sensors. Gridded surveys using these devices allowed obtaining 2D maps of the concentration and distribution of various gasses over the area covered by the flight path.

  7. Development of a new contact lens multipurpose solution: Comparative analysis of microbiological, biological and clinical performance

    PubMed Central

    Kilvington, Simon; Huang, Ling; Kao, Eugenia; Powell, Charles H.

    2010-01-01

    Purpose Antimicrobial, cytotoxicity and clinical performance of a new soft contact lens multi-purpose solution (COMPLETE® RevitaLens) based on polyquaternium-1 and alexidine dihydrochloride (NuMPS) was evaluated. Methods Antimicrobial efficacy was assessed according to ISO 14729 for both biocidal and regimen performance against bacteria and fungi. Acanthamoeba efficacy was tested along with ability to retain antimicrobial activity on partial evaporation. In vitro cytotoxicity of NuMPS and OPTI-FREE® RepleniSH® MPS (MPS-3) was assessed based on ISO 10993-5 and United States Pharmacopeia (USP) methods. In addition, a 3 month, double-masked, parallel group clinical trial comparing safety and acceptability with respect to MPS-3 was conducted with 4 silicone hydrogel (SiHy) and FDA Group IV lens types. Results NuMPS showed broad antimicrobial efficacy, including Acanthamoeba, giving a 3–4 log10 reduction in viability after 6 hours contact time. NuMPS also passed ISO 14729 regimens with SiHy and etafilcon lenses for bacteria, fungi and also Acanthamoeba. The cytotoxicity of NuMPS was equivalent or better compared to MPS-3. In the clinical trial, there was no statistically significant between-group difference in corneal staining (p > 0.05). Patients using MPS-3 had more adverse events than patients using NuMPS: 11.8 % (11/93) versus 2.8 % (5/177), respectively, (p < 0.05). There were no differences noted in cleanliness or wearing comfort (p > 0.05). Conclusion Taken together, the results of these studies indicate that the NuMPS is a novel and effective soft contact lens care solution.

  8. Increased concentration of hyaluronan in tears after soaking contact lenses in Biotrue multipurpose solution

    PubMed Central

    Scheuer, Catherine A; Rah, Marjorie J; Reindel, William T

    2016-01-01

    Purpose This study was conducted to determine 1) the concentration of hyaluronan (HA) in the tear films of contact lens (CL) wearers versus non-CL wearers and 2) whether HA sorbed from Biotrue, an HA-containing multipurpose solution (MPS), onto senofilcon A lenses affects the concentration of HA in tears after 2 hours of wear. Patients and methods Tears of habitual CL wearers and non-CL wearers were collected on Schirmer strips at baseline and after 2 hours of wear of senofilcon A CLs that had first been either rinsed with Sensitive Eyes Saline or soaked in Biotrue MPS for 14 hours. HA concentrations were measured by enzyme-linked immunosorbent assay (ELISA) and adjusted for sample volumes. Results No difference in baseline concentrations of HA in tears was found between CL wearers and non-CL wearers (P=0.07), nor between males and females (P=0.06). However, age was significantly negatively associated with HA concentration (P<0.01), and mostly, CL wear contributed to a significant association (P<0.01). Among saline-rinsed CL wearers, no change in HA concentration in tears was observed after 2 hours of wear (P=0.38). By contrast, a significant increase in HA concentration was observed in the tears from eyes that had worn CLs soaked in Biotrue MPS when compared to baseline (P=0.01) or to saline-rinsed control (P=0.03). Conclusion 1) In this study population, no difference in baseline concentration of HA was observed between CL wearers and non-CL wearers, and 2) after 2 hours of wear of senofilcon A lenses that were soaked in Biotrue MPS, HA concentrations in the tear films of CL wearers increased. PMID:27784983

  9. Modelling Tradeoffs Evolution in Multipurpose Water Systems Operation in Response to Extreme Events

    NASA Astrophysics Data System (ADS)

    Mason, E.; Gazzotti, P.; Amigoni, F.; Giuliani, M.; Castelletti, A.

    2015-12-01

    Multipurpose water resource systems are usually operated on a tradeoff of the operating objectives, which - under steady state climatic and socio-economic boundary conditions - is supposed to ensure a fair and/or efficient balance among the conflicting interests. Extreme variability in the system's drivers might affect operators' risk aversion and force a change in the tradeoff. Properly accounting for these shifts is key to any rigorous retrospective assessment of operators' behavior and the associated system's performance. In this study, we explore how the selection of different optimal tradeoffs among the operating objectives is linked to the variations of the boundary conditions, such as, for example, drifting rainfall season or remarkable changes in crop and energy prices. We argue that tradeoff selection is driven by recent, extreme variations in system performance: underperforming on one of the operating objective target value should push the tradeoff toward the disadvantaged objective. To test this assumption, we developed a rational procedure to simulate the operators' tradeoff selection process. We map the selection onto a multi lateral negotiation process, where different multiple, virtual agents optimize different operating objectives. The agents periodically negotiate a compromise on the operating policy. The agent's rigidity in each negotiation round is determined by the recent system performances according to the specific objective it represents. The negotiation follows a set-based egocentric monotonic concession protocol: at each negotiation step an agent incrementally adds some options to the set of its acceptable compromises and (possibly) accepts lower and lower satisfying policies until an agreement is achieved. We apply this reiterated negotiation framework on the regulated Lake Como, Italy, simulating the lake dam operation and its recurrent updates over the last 50 years. The operation aims to balance shoreline flood prevention and irrigation

  10. Transcriptomic Analysis of Multipurpose Timber Yielding Tree Neolamarckia cadamba during Xylogenesis Using RNA-Seq

    PubMed Central

    Zhao, Xianhai; Que, Qingmin; Li, Pei; Huang, Hao; Deng, Xiaomei; Singh, Sunil Kumar; Wu, Ai-Min; Chen, Xiaoyang

    2016-01-01

    Neolamarckia cadamba is a fast-growing tropical hardwood tree that is used extensively for plywood and pulp production, light furniture fabrication, building materials, and as a raw material for the preparation of certain indigenous medicines. Lack of genomic resources hampers progress in the molecular breeding and genetic improvement of this multipurpose tree species. In this study, transcriptome profiling of differentiating stems was performed to understand N. cadamba xylogenesis. The N. cadamba transcriptome was sequenced using Illumina paired-end sequencing technology. This generated 42.49 G of raw data that was then de novo assembled into 55,432 UniGenes with a mean length of 803.2bp. Approximately 47.8% of the UniGenes (26,487) were annotated against publically available protein databases, among which 21,699 and 7,754 UniGenes were assigned to Gene Ontology categories (GO) and Clusters of Orthologous Groups (COG), respectively. 5,589 UniGenes could be mapped onto 116 pathways using the Kyoto Encyclopedia of Genes and Genomes (KEGG) pathway database. Among 6,202 UniGenes exhibiting differential expression during xylogenesis, 1,634 showed significantly higher levels of expression in the basal and middle stem segments compared to the apical stem segment. These genes included NAC and MYB transcription factors related to secondary cell wall biosynthesis, genes related to most metabolic steps of lignin biosynthesis, and CesA genes involved in cellulose biosynthesis. This study lays the foundation for further screening of key genes associated with xylogenesis in N. cadamba as well as enhancing our understanding of the mechanism of xylogenesis in fast-growing trees. PMID:27438485

  11. Matrix and reservoir-type multipurpose vaginal rings for controlled release of dapivirine and levonorgestrel.

    PubMed

    Boyd, Peter; Fetherston, Susan M; McCoy, Clare F; Major, Ian; Murphy, Diarmaid J; Kumar, Sandeep; Holt, Jonathon; Brimer, Andrew; Blanda, Wendy; Devlin, Brid; Malcolm, R Karl

    2016-09-10

    A matrix-type silicone elastomer vaginal ring providing 28-day continuous release of dapivirine (DPV) - a lead candidate human immunodeficiency virus type 1 (HIV-1) microbicide compound - has recently demonstrated moderate levels of protection in two Phase III clinical studies. Here, next-generation matrix and reservoir-type silicone elastomer vaginal rings are reported for the first time offering simultaneous and continuous in vitro release of DPV and the contraceptive progestin levonorgestrel (LNG) over a period of between 60 and 180days. For matrix-type vaginal rings comprising initial drug loadings of 100, 150 or 200mg DPV and 0, 16 or 32mg LNG, Day 1 daily DPV release values were between 4132 and 6113μg while Day 60 values ranged from 284 to 454μg. Daily LNG release ranged from 129 to 684μg on Day 1 and 2-91μg on Day 60. Core-type rings comprising one or two drug-loaded cores provided extended duration of in vitro release out to 180days, and maintained daily drug release rates within much narrower windows (either 75-131μg/day or 37-66μg/day for DPV, and either 96-150μg/day or 37-57μg/day for LNG, depending on core ring configuration and ignoring initial lag release effect for LNG) compared with matrix-type rings. The data support the continued development of these devices as multi-purpose prevention technologies (MPTs) for HIV prevention and long-acting contraception. PMID:27473275

  12. Multipurpose bedrock surficial, and environmental geologic maps, New River valley, southwest Virginia

    SciTech Connect

    Schultz, A. ); Collins, T. )

    1994-03-01

    Multipurpose bedrock, surficial, and environmental geologic maps have recently been completed for portions of the Valley and Ridge province of southwest VA. The maps, at both 1:100,000 and 1:24,000 scales, show generalized and detailed bedrock geology grouped by lithology and environmental hazard associations. Also shown are a variety of alluvial, colluvial, debris flow, and landslide deposits, as well as karst features. Multidisciplinary research topics addressed during the mapping included slope evolution and geomorphology, drainage history and terrace distribution, ancient large-scale landsliding, and sinkhole development. The maps have been used by land-use planners and engineering firms in an evaluation of Appalachian paleoseismicity and to assess potential groundwater contamination and subsidence in karst areas. The maps are being used for environmental hazard assessment and site selection of a proposed large electric powerline that crosses the Jefferson National Forest. Also, the maps are proving useful in planning for a public access interpretive geologic enter focused on large-scale slope failures. Some of the largest known landslides in eastern North America took place within the map area. Field comparisons and detailed structure mapping of similar features along the Front Range of the Colorado Rockies indicate that the landslides were probably emplaced during a single catastrophic event of short duration. Although the giles County seismic zone is nearby, stability analyses of slopes in the map area have shown that failure need not have been initiated by a seismic event. Several distinct colluvial units mapped within the area of landslides document a period of extensive weathering that postdates slide emplacement. Radiocarbon dates from landslide sag ponds indicate a minimum age of 9,860 B.P. for emplacement of some of the landslides. These results indicate that pre-slide colluvial and debris flow deposits are at least Pleistocene in age.

  13. HyBIS - a low cost, multi-purpose, modular vehicle for detailed ocean mapping

    NASA Astrophysics Data System (ADS)

    Huehnerbach, V.; Murton, B.; Berndt, C.; Garrard, J.; Wollatz-Vogt, M.; Wetzel, G.; Matthiessen, T.

    2013-12-01

    HyBIS is a low-cost, multi-purpose, highly maneuverable, fibre-optic controlled survey and sampling robotic underwater vehicle (RUV) capable of diving to 6000m. Built in the UK by Hydro-Lek Ltd. in collaboration with the National Oceanography Centre, Southampton, it has proven itself during recent discoveries of the deepest hydrothermal vents in the world, at 5100m deep in the Cayman Trough in the Caribbean and habitat mapping of seamounts in the Atlantic and Indian oceans . The vehicle has a modular design, with the top module being a command and power system that comprises power management, cameras, lights, hydraulics, thrusters and telemetry. The lower module can alternatively be a clam-shell sampling grab, a manipulator-arm and tool sled, a winch for instrument recovery, or an ocean bottom seismometer deployment module. Unlike a conventional ROV, HyBIS does not have any floatation, rather it is suspended by its umbilical cable directly from the ship. The advantage of direct suspension is that HyBIS can recover or deploy a payload of up to 700kg, although this comes at the price of reduced maneuverability compared to a 'normal' ROV. During its four years of service, HyBIS has, so far, accumulated an impressive list of achievements: recording over 450 hours of HD video footage, thousands of HD still images, collected geological, biological samples, as well as fluids and gas from over 40 different sites. It has also recovered two different seabed landers containing scientific equipment worth over £300k, and placed Ocean Bottom Seismometers onto the seafloor.

  14. Forward Bay Cover Separation Modeling and Testing for the Orion Multi-Purpose Crew Vehicle

    NASA Technical Reports Server (NTRS)

    Ali, Yasmin; Radke, Tara; Chuhta, Jesse; Hughes, Michael

    2014-01-01

    Spacecraft multi-body separation events during atmospheric descent require complex testing and analysis to validate the flight separation dynamics model and to verify no recontact. NASA Orion Multi-Purpose Crew Vehicle (MPCV) teams examined key model parameters and risk areas to develop a robust but affordable test campaign in order to validate and verify the Forward Bay Cover (FBC) separation event for Exploration Flight Test-1 (EFT-1). The FBC jettison simulation model is highly complex, consisting of dozens of parameters varied simultaneously, with numerous multi-parameter interactions (coupling and feedback) among the various model elements, and encompassing distinct near-field, mid-field, and far-field regimes. The test campaign was composed of component-level testing (for example gas-piston thrusters and parachute mortars), ground FBC jettison tests, and FBC jettison air-drop tests that were accomplished by a highly multi-disciplinary team. Three ground jettison tests isolated the testing of mechanisms and structures to anchor the simulation models excluding aerodynamic effects. Subsequently, two air-drop tests added aerodynamic and parachute parameters, and served as integrated system demonstrations, which had been preliminarily explored during the Orion Pad Abort-1 (PA-1) flight test in May 2010. Both ground and drop tests provided extensive data to validate analytical models and to verify the FBC jettison event for EFT-1, but more testing is required to support human certification, for which NASA and Lockheed Martin are applying knowledge from Apollo and EFT-1 testing and modeling to develop a robust but affordable human spacecraft capability.

  15. Meta-analysis of the ocular biocompatibility of a new multipurpose lens care system

    PubMed Central

    Reindel, William; Merchea, Mohinder M; Rah, Marjorie J; Zhang, Lening

    2013-01-01

    Background The purpose of this paper is to evaluate the biocompatibility of a novel multipurpose solution (MPS) with a dual disinfectant system containing polyaminopropyl biguanide and polyquaternium-1 (Biotrue®) by analysis of biomicroscopy signs and adverse events in six large clinical trials. Methods Data from six consecutive, prospective clinical trials conducted from February 2008 to March 2010 were combined for meta-analysis. Subjects used the new MPS daily for periods of 2 weeks to 6 months. Slit-lamp signs were graded at each follow-up visit using an ordinal scale (0, one; 1, trace; 2, mild; 3, moderate; 4, severe). Analysis for biocompatibility included tracking of greater than grade 2 slit-lamp findings and number of adverse events. Results A total of 1,567 subjects (3,134 eyes) and 81 clinical investigators participated in the six studies, with 1,499 subjects completing the studies. Based on subject days in the studies, there were 72,904 exposures to the MPS and 7,212 biomicroscopy examinations. The completion rate for the studies was 96.3%. Per observation incidence of any finding greater than grade 2 at the follow-up visits were: corneal staining 0.08%, limbal injection 0.04%, bulbar injection 0.04%, tarsal conjunctiva abnormality 0.09%, and neovascularization 0.01%. There were no other slit-lamp signs greater than grade 2 and no statistically significant difference between hydrogels and silicone hydrogels for any finding. There were no reports of adverse events during the trials. Conclusion Analysis of over 72,000 daily exposures and 7,212 eye examinations showed that the novel MPS exhibited excellent biocompatibility in subjects using daily wear hydrogel or silicone hydrogel lenses. PMID:24143073

  16. Design for multipurpose use: an application of DfE concept in a developing economy

    NASA Astrophysics Data System (ADS)

    Dunmade, Israel

    2004-12-01

    Design for Environment (DfE) has been defined as the systematic integration of environmental considerations into product and process design. And it has been discovered that material and space can be saved when several functions are integrated into a single product by taking advantage of common components. In this design and development project, a multipurpose thresher was designed based on an integrated concept of design for modularity, disassembly, demanufacturing and remanufacturing. The machine can be used to thresh various types of farm produce such as rice, sorghum, cowpea and rye by changing the concave and the cylinder (threshing drum). The configuration of the machine enables access to most of the component parts without changing the tools needed for disassembly because the same type of fasteners was used. Furthermore, the functional units (the shelling unit, the separation unit and the grading unit) were assembled into modules such that only the faulty part needs to be replaced if necessary. The design was so simplified that the operator can make the changes for different uses without any difficulty. The machine has been successfully tested with a number of these products and it is scheduled for tests with other produce like corn and peanuts. The modularity of the functional unit will facilitate multi-lifecycle use of machine and/or its component parts. The uniformity of the liaisons and simplification of the configuration will reduce both the disassembly times and maintenance cost. By this integration, the material requirements for four different machines are conserved, environmental emissions that would be associated with the manufacture, transportation and disposal of four machines are eliminated while the capital requirements by farmers for machinery are reduced to about a quarter. Consequently the total lifecycle cost is kept minimum while the eco-efficiency is maximized.

  17. Reproductive traits affect the rescue of valuable and endangered multipurpose tropical trees

    PubMed Central

    Sinébou, Viviane; Quinet, Muriel; Ahohuendo, Bonaventure C.; Jacquemart, Anne-Laure

    2016-01-01

    Conservation strategies are urgently needed in Tropical areas for widely used tree species. Increasing numbers of species are threatened by overexploitation and their recovery might be poor due to low reproductive success and poor regeneration rates. One of the first steps in developing any conservation policy should be an assessment of the reproductive biology of species that are threatened by overexploitation. This work aimed to study the flowering biology, pollination and breeding system of V. doniana, a multipurpose threatened African tree, as one step in assessing the development of successful conservation strategies. To this end, we studied (1) traits directly involved in pollinator attraction like flowering phenology, flower numbers and morphology, and floral rewards; (2) abundance, diversity and efficiency of flower visitors; (3) breeding system, through controlled hand-pollination experiments involving exclusion of pollinators and pollen from different sources; and (4) optimal conditions for seed germination. The flowering phenology was asynchronous among inflorescences, trees and sites. The flowers produced a large quantity of pollen and nectar with high sugar content. Flowers attracted diverse and abundant visitors, counting both insects and birds, and efficient pollinators included several Hymenoptera species. We detected no spontaneous self-pollination, indicating a total dependence on pollen vectors. Vitex doniana is self-compatible and no inbreeding depression occurred in the first developmental stages. After extraction of the seed from the fruit, seed germination did not require any particular conditions or pre-treatments and the seeds showed high germination rates. These pollination and breeding characteristics as well as germination potential offer the required conditions to develop successful conservation strategies. Protection, cultivation and integration in agroforestry systems are required to improve the regeneration of the tree. PMID:27354660

  18. Evaluation of safety and efficacy of a new multipurpose disinfecting solution on silicone hydrogel contact lenses☆

    PubMed Central

    Pinto-Fraga, José; Blázquez Arauzo, Francisco; Urbano Rodríguez, Rubén; González-García, María J.

    2014-01-01

    Purpose To evaluate the safety and efficacy of a new multipurpose disinfecting solution (MPDS) with a formulation that includes aloe vera on its composition. Methods This is a prospective, randomized, double-masked clinical trial with a crossover design that included seven examinations. Two different MPDSs, Avizor Alvera® (study solution) and All Clean Soft® (control solution), each were used for 1 month. Comfilcon A silicone hydrogel contact lenses were used during the trial. The main outcome variables were corneal staining and deposits on the surfaces of the contact lenses. Other parameters including ocular surface response, contact lens wettability, user satisfaction, and adverse events, were analyzed according to the International Organization for Standardization (ISO) 11980:2010 guidance for clinical investigation. Results Twenty subjects (10 women, 10 men) (mean age, 27.7 ± 5.6 years; range, 20–41) were included. No differences between both MPDSs were found in the percentage of subjects with corneal staining >0 at day 30 (study: 35%, control: 50%; p = 0.46); neither in the percentage of subjects with deposits on the surface of the contact lens >0 at day 30 (study: 26.32%, control: 52.63%; p = 0.18). The study MPDS received higher rates in comfort (study: 8.14 ± 1.09, control: 7.94 ± 0.92; p = 0.56) and satisfaction at day 30 (study: 8.63 ± 0.91, control: 8.29 ± 0.80; p = 0.19), however the scores were not significantly different with the control MPDS. Conclusions The clinical trial showed that the study MPDS is safe, efficient, and has acceptable physiologic tolerance, according to the ISO 11980:2010 guidance for clinical investigation. PMID:25649640

  19. LANGUAGE LABORATORIES.

    ERIC Educational Resources Information Center

    BRUBAKER, CHARLES WILLIAM

    THE USE OF THE LANGUAGE LABORATORY HAS GIVEN MANY THOUSANDS OF INDIVIDUALS GOOD LISTENING AND SPEAKING PRACTICE AND HAS BECOME AN EFFECTIVE LEARNING TOOL. THE BASIC PIECE OF EQUIPMENT OF THE LANGUAGE LABORATORY IS THE TAPE RECORDER-AND-PLAYBACK, DESIGNED TO BE USED WITH AUDIOPASSIVE STUDY, AUDIOACTIVE STUDY, AUDIOACTIVE-COMPARATIVE STUDY, AND…

  20. Learning Laboratory.

    ERIC Educational Resources Information Center

    Hay, Lyn; Callison, Daniel

    2000-01-01

    Considers the school library media center as an information learning laboratory. Topics include information literacy; Kuhlthau's Information Search Process model; inquiry theory and approach; discovery learning; process skills of laboratory science; the information scientist; attitudes of media specialists, teachers, and students; displays and Web…

  1. Novel Functional Role of NK3R Expression in the Potentiating Effects on Somatolactin α Autoregulation in grass carp pituitary cells

    PubMed Central

    Hu, Guangfu; He, Mulan; Wong, Anderson On Lam

    2016-01-01

    In our previous study, NKB/NK3R system has been shown to act at the pituitary level to up-regulate SLα synthesis and secretion in grass carp. However, whether NK3R expression can serve as a regulatory target at the pituitary level and contribute to NKB interactions with other SLα regulators is still unclear. In current study, using grass carp pituitary cells as a model, we have a novel finding that co-treatment of SLα/SLβ with carp TAC3 gene products, could induce a noticeable enhancement in SLα mRNA expression and these potentiating effects occurred with a parallel rise in NK3R transcript level after SLα/SLβ treatment. Interestingly, the stimulatory effects of SLα/SLβ on NK3R gene expression could be further potentiated by co-treatment with IGF-I/-II and simultaneous exposure of carp pituitary cells to SLα/SLβ and IGF-I/-II in the presence of TAC3 gene products was found to markedly elevated SLα mRNA expression (20 fold increase) and this synergistic stimulation was mediated by cAMP/PKA-, PLC/PKC- and Ca2+ -dependent cascades functionally coupled with NK3R activation. These findings suggest that local release of SLα via functional interactions with IGF-I/-II and TAC3/NK3R system may constitute a potent stimulatory signal for SLα gene expression in the carp pituitary via up-regulation of NK3R expression. PMID:27786296

  2. Design and fabrication of a multi-purpose soft x-ray array diagnostic system for KSTAR

    SciTech Connect

    Lee, Seung Hun; Chai, Kil Byoung; Jang, Siwon; Choe, Wonho; Ko, Won-Ha; Kim, Junghee; Seo, Dongcheol; Lee, Jongha; Bogatu, I. N.; Kim, Jin-Soo

    2012-10-15

    A multi-purpose soft x-ray array diagnostic system was developed for measuring two-dimensional x-ray emissivity profile, electron temperature, Ar impurity transport, and total radiation power. A remotely controlled filter wheel was designed with three different choices of filters. The electron temperature profile can be determined from the ratio of two channels having different thickness of Be layer, and the Ar impurity concentration transport can be determined from a pair of Ar Ross filters (CaF{sub 2} and NaCl thin films). Without any filters, this diagnostic system can also be used as a bolometer.

  3. Design and fabrication of a multi-purpose soft x-ray array diagnostic system for KSTAR.

    PubMed

    Lee, Seung Hun; Chai, Kil Byoung; Jang, Siwon; Ko, Won-Ha; Kim, Junghee; Seo, Dongcheol; Lee, Jongha; Bogatu, I N; Kim, Jin-Soo; Choe, Wonho

    2012-10-01

    A multi-purpose soft x-ray array diagnostic system was developed for measuring two-dimensional x-ray emissivity profile, electron temperature, Ar impurity transport, and total radiation power. A remotely controlled filter wheel was designed with three different choices of filters. The electron temperature profile can be determined from the ratio of two channels having different thickness of Be layer, and the Ar impurity concentration transport can be determined from a pair of Ar Ross filters (CaF(2) and NaCl thin films). Without any filters, this diagnostic system can also be used as a bolometer.

  4. Multipurpose modular experimental station for the DiProI beamline of Fermi@Elettra free electron laser.

    PubMed

    Pedersoli, Emanuele; Capotondi, Flavio; Cocco, Daniele; Zangrando, Marco; Kaulich, Burkhard; Menk, Ralf H; Locatelli, Andrea; Mentes, Tevfik O; Spezzani, Carlo; Sandrin, Gilio; Bacescu, Daniel M; Kiskinova, Maya; Bajt, Saša; Barthelmess, Miriam; Barty, Anton; Schulz, Joachim; Gumprecht, Lars; Chapman, Henry N; Nelson, A J; Frank, Matthias; Pivovaroff, Michael J; Woods, Bruce W; Bogan, Michael J; Hajdu, Janos

    2011-04-01

    We present a compact modular apparatus with a flexible design that will be operated at the DiProI beamline of the Fermi@Elettra free electron laser (FEL) for performing static and time-resolved coherent diffraction imaging experiments, taking advantage of the full coherence and variable polarization of the short seeded FEL pulses. The apparatus has been assembled and the potential of the experimental setup is demonstrated by commissioning tests with coherent synchrotron radiation. This multipurpose experimental station will be open to general users after installation at the Fermi@Elettra free electron laser in 2011.

  5. Multipurpose modular experimental station for the DiProI beamline of Fermi@Elettra free electron laser

    NASA Astrophysics Data System (ADS)

    Pedersoli, Emanuele; Capotondi, Flavio; Cocco, Daniele; Zangrando, Marco; Kaulich, Burkhard; Menk, Ralf H.; Locatelli, Andrea; Mentes, Tevfik O.; Spezzani, Carlo; Sandrin, Gilio; Bacescu, Daniel M.; Kiskinova, Maya; Bajt, Saša; Barthelmess, Miriam; Barty, Anton; Schulz, Joachim; Gumprecht, Lars; Chapman, Henry N.; Nelson, A. J.; Frank, Matthias; Pivovaroff, Michael J.; Woods, Bruce W.; Bogan, Michael J.; Hajdu, Janos

    2011-04-01

    We present a compact modular apparatus with a flexible design that will be operated at the DiProI beamline of the Fermi@Elettra free electron laser (FEL) for performing static and time-resolved coherent diffraction imaging experiments, taking advantage of the full coherence and variable polarization of the short seeded FEL pulses. The apparatus has been assembled and the potential of the experimental setup is demonstrated by commissioning tests with coherent synchrotron radiation. This multipurpose experimental station will be open to general users after installation at the Fermi@Elettra free electron laser in 2011.

  6. MUST - An integrated system of support tools for research flight software engineering. [Multipurpose User-oriented Software Technology

    NASA Technical Reports Server (NTRS)

    Straeter, T. A.; Foudriat, E. C.; Will, R. W.

    1977-01-01

    The objectives of NASA's MUST (Multipurpose User-oriented Software Technology) program at Langley Research Center are to cut the cost of producing software which effectively utilizes digital systems for flight research. These objectives will be accomplished by providing an integrated system of support software tools for use throughout the research flight software development process. A description of the overall MUST program and its progress toward the release of a first MUST system will be presented. This release includes: a special interactive user interface, a library of subroutines, assemblers, a compiler, automatic documentation tools, and a test and simulation system.

  7. Multipurpose modular experimental station for the DiProI beamline of Fermi@Elettra free electron laser.

    PubMed

    Pedersoli, Emanuele; Capotondi, Flavio; Cocco, Daniele; Zangrando, Marco; Kaulich, Burkhard; Menk, Ralf H; Locatelli, Andrea; Mentes, Tevfik O; Spezzani, Carlo; Sandrin, Gilio; Bacescu, Daniel M; Kiskinova, Maya; Bajt, Saša; Barthelmess, Miriam; Barty, Anton; Schulz, Joachim; Gumprecht, Lars; Chapman, Henry N; Nelson, A J; Frank, Matthias; Pivovaroff, Michael J; Woods, Bruce W; Bogan, Michael J; Hajdu, Janos

    2011-04-01

    We present a compact modular apparatus with a flexible design that will be operated at the DiProI beamline of the Fermi@Elettra free electron laser (FEL) for performing static and time-resolved coherent diffraction imaging experiments, taking advantage of the full coherence and variable polarization of the short seeded FEL pulses. The apparatus has been assembled and the potential of the experimental setup is demonstrated by commissioning tests with coherent synchrotron radiation. This multipurpose experimental station will be open to general users after installation at the Fermi@Elettra free electron laser in 2011. PMID:21529017

  8. Simultaneous noncontact AFM and STM of Ag:Si(111)-(3×3)R30∘

    NASA Astrophysics Data System (ADS)

    Sweetman, Adam; Stannard, Andrew; Sugimoto, Yoshiaki; Abe, Masayuki; Morita, Seizo; Moriarty, Philip

    2013-02-01

    The Ag:Si(111)-(3×3)R30∘ surface structure has attracted considerable debate concerning interpretation of scanning tunneling microscope (STM) and noncontact atomic force microscope (NC-AFM) images. In particular, the accepted interpretation of atomic resolution images in NC-AFM has been questioned by theoretical and STM studies. In this paper, we use combined NC-AFM and STM to conclusively show that the inequivalent trimer (IET) configuration best describes the surface ground state. Thermal-averaging effects result in a honeycomb-chained-trimer (HCT) appearance at room temperature, in contrast to studies suggesting that the IET configuration remains stable at higher temperatures [Zhang, Gustafsson, and Johansson, Phys. Rev. BPRBMDO1098-012110.1103/PhysRevB.74.201304 74, 201304(R) (2006) and J. Phys.: Conf. Ser.1742-658810.1088/1742-6596/61/1/264 61, 1336 (2007)]. We also comment on results obtained at an intermediate temperature that suggest an intriguing difference between the imaging mechanisms of NC-AFM and STM on structurally fluctuating samples.

  9. Drosophila larval to pupal switch under nutrient stress requires IP3R/Ca2+ signalling in glutamatergic interneurons

    PubMed Central

    Jayakumar, Siddharth; Richhariya, Shlesha; Reddy, O Venkateswara; Texada, Michael J; Hasan, Gaiti

    2016-01-01

    Neuronal circuits are known to integrate nutritional information, but the identity of the circuit components is not completely understood. Amino acids are a class of nutrients that are vital for the growth and function of an organism. Here, we report a neuronal circuit that allows Drosophila larvae to overcome amino acid deprivation and pupariate. We find that nutrient stress is sensed by the class IV multidendritic cholinergic neurons. Through live calcium imaging experiments, we show that these cholinergic stimuli are conveyed to glutamatergic neurons in the ventral ganglion through mAChR. We further show that IP3R-dependent calcium transients in the glutamatergic neurons convey this signal to downstream medial neurosecretory cells (mNSCs). The circuit ultimately converges at the ring gland and regulates expression of ecdysteroid biosynthetic genes. Activity in this circuit is thus likely to be an adaptation that provides a layer of regulation to help surpass nutritional stress during development. DOI: http://dx.doi.org/10.7554/eLife.17495.001 PMID:27494275

  10. Adsorption study of copper phthalocyanine on Si(111)(√3 × √3)R30°Ag surface

    NASA Astrophysics Data System (ADS)

    Menzli, S.; Ben Hamada, B.; Arbi, I.; Souissi, A.; Laribi, A.; Akremi, A.; Chefi, C.

    2016-04-01

    The adsorption of copper phthalocyanine (CuPc) molecules on Si(111)(√3 × √3)R30°Ag surface is studied at room temperature under ultra high vacuum. Crystallographic, chemical and electronic properties of the interface are investigated by low energy electron diffraction (LEED), ultraviolet and X-ray photoemission spectroscopies (UPS, XPS) and X-ray photoemission diffraction (XPD). LEED and XPD results indicate that after one monolayer deposition the molecular layer is highly ordered with a flat lying adsorption configuration. The corresponding pattern reveals the coexistence of three symmetrically equivalent orientations of molecules with respect to the substrate. XPS core level spectra of the substrate reveal that there is no discernible chemical interaction between molecules and substrate; however there is evidence of Fermi level movement. During the growth, the work function was found to decrease from 4.90 eV for the clean substrate to 4.35 eV for the highest coverage (60 monolayers). Within a thickness of two monolayer deposition an interface dipole of 0.35 eV and a band bending of 0.2 eV have been found. UPS spectra indicate the existence of a band bending of the highest occupied molecular orbital (HOMO) of 0.55 eV. The changes in the work function, in the Fermi level position and in the HOMO state have been used to determine the energy level alignment at the interface.

  11. 4-Carboxyanilinium (2R,3R)-tartrate and a redetermination of the alpha-polymorph of 4-aminobenzoic acid.

    PubMed

    Athimoolam, S; Natarajan, S

    2007-09-01

    In the title compounds, 4-carboxyanilinium (2R,3R)-tartrate, C(7)H(8)NO(2)+.C(4)H(5)O(6)-, (I), and 4-aminobenzoic acid, C(7)H(7)NO(2), (II), the carboxyl planes of the 4-carboxyanilinium cations/4-aminobenzoic acid are twisted from the aromatic plane. In (I), the characteristic head-to-tail interactions are observed through the tartrate anions, forming two C2(2)(7) chain motifs propagating parallel to the a and c axes of the unit cell. Also, the tartrate anions are connected through two primary C1(1)(6) and C1(1)(7) chain motifs, leading to a secondary R4(4)(22) ring motif. In (II), head-to-tail interaction is seen through a discrete D1(1)(2) motif and carboxyl group dimerization is observed through centrosymmetrically related R2(2)(8) motifs around the inversion centres of the unit cell. The crystal structures of both compounds are stabilized by intricate three-dimensional hydrogen-bonding networks. Alternate hydrophobic and hydrophilic layers are observed in (I) as a result of a column-like arrangement of the anions and the aromatic rings of the cations.

  12. Pressure dependence of metal-insulator transition in perovskites RNiO3 ( R=Eu , Y, Lu)

    NASA Astrophysics Data System (ADS)

    Cheng, J.-G.; Zhou, J.-S.; Goodenough, J. B.; Alonso, J. A.; Martinez-Lope, M. J.

    2010-08-01

    High-pressure experiments on the RNiO3 perovskites with smaller rare-earth R3+ ions complete our study of the crossover from itinerant to localized e -electron behavior associated with the low-spin Ni(III):t6e1 ion. By measuring second-sintered samples in a multianvil module, we have observed a clear anomaly of ρ(T) at TIM and obtained the pressure dependence of TIM for the RNiO3 ( R=Eu , Y, Lu) that are different from the published data supporting a charge-ordering model. Instead, they are comparable to that for the orbital-ordering insulator LaMnO3 . Our distinct results show clearly that where the crossover is approached from the localized-electron side by increasing the orbital overlap integral, a cooperative Jahn-Teller distortion prevents charge transfer from molecular e orbitals on strongly bonded NiO6/2 clusters to more weakly bonded Ni(III) centers. However, where the crossover is approached from the itinerant-electron side as in the perovskite CaFeO3 , a disproportionation charge transfer may occur. In a separate experiment in which the powder samples were pressed in a Bridgman anvil device without a pressure medium, we have shown after releasing pressure that the samples were reduced. This irreversible effect should be distinguished from the hydrostatic-pressure effect on the physical properties of the RNiO3 perovskites.

  13. Automatic sorting of toxicological information into the IUCLID (International Uniform Chemical Information Database) endpoint-categories making use of the semantic search engine Go3R.

    PubMed

    Sauer, Ursula G; Wächter, Thomas; Hareng, Lars; Wareing, Britta; Langsch, Angelika; Zschunke, Matthias; Alvers, Michael R; Landsiedel, Robert

    2014-06-01

    The knowledge-based search engine Go3R, www.Go3R.org, has been developed to assist scientists from industry and regulatory authorities in collecting comprehensive toxicological information with a special focus on identifying available alternatives to animal testing. The semantic search paradigm of Go3R makes use of expert knowledge on 3Rs methods and regulatory toxicology, laid down in the ontology, a network of concepts, terms, and synonyms, to recognize the contents of documents. Search results are automatically sorted into a dynamic table of contents presented alongside the list of documents retrieved. This table of contents allows the user to quickly filter the set of documents by topics of interest. Documents containing hazard information are automatically assigned to a user interface following the endpoint-specific IUCLID5 categorization scheme required, e.g. for REACH registration dossiers. For this purpose, complex endpoint-specific search queries were compiled and integrated into the search engine (based upon a gold standard of 310 references that had been assigned manually to the different endpoint categories). Go3R sorts 87% of the references concordantly into the respective IUCLID5 categories. Currently, Go3R searches in the 22 million documents available in the PubMed and TOXNET databases. However, it can be customized to search in other databases including in-house databanks.

  14. Laboratory Tests

    MedlinePlus

    ... Home Medical Devices Products and Medical Procedures In Vitro Diagnostics Lab Tests Laboratory Tests Share Tweet Linkedin ... Approved Home and Lab Tests Find All In Vitro Diagnostic Products and Decision Summaries Since November 2003 ...

  15. Friction Stir Weld Application and Tooling Design for the Multi-purpose Crew Vehicle Stage Adapter

    NASA Technical Reports Server (NTRS)

    Alcorn, John

    2013-01-01

    The Multi-Purpose Crew Vehicle (MPCV), commonly known as the Orion capsule, is planned to be the United States' next manned spacecraft for missions beyond low earth orbit. Following the cancellation of the Constellation program and creation of SLS (Space Launch System), the need arose for the MPCV to utilize the Delta IV Heavy rocket for a test launch scheduled for 2014 instead of the previously planned Ares I rocket. As a result, an adapter (MSA) must be used in conjunction with the MPCV to account for the variation in diameter of the launch vehicles; 5.5 meters down to 5.0 meters. Prior to ight article fabrication, a path nder (test article) will be fabricated to ne tune the associated manufacturing processes. The adapter will be comprised of an aluminum frustum (partial cone) that employs isogrid technology and circumferential rings on each end. The frustum will be fabricated by friction stir welding (FSW) three individual panels together on a Vertical Weld Tool (VWT) at NASA Marshall Space Flight Center. Subsequently, each circumferential ring will be friction stir welded to the frustum using a Robotic Weld Tool (RWT). The irregular geometry and large mass of the MSA require that extensive tooling preparation be put into support structures for the friction stir weld. The tooling on the VWT will be comprised of a set of conveyors mounted on pre-existing stanchions so that the MSA will have the ability to be rotated after each of the three friction stir welds. The tooling requirements to friction stir weld the rings with the RWT are somewhat more demanding. To support the mass of the MSA and resist the load of the weld tool, a system of mandrels will be mounted to stanchions and assembled in a circle. The goal of the paper will be to explain the design, fabrication, and assembly of the tooling, to explain the use of friction stir welding on the MSA path nder, and also to discuss the lessons learned and modi cations made in preparation for ight article fabrication

  16. A Modern Explorer's Journey - using events for innovative multipurpose educational outreach

    NASA Astrophysics Data System (ADS)

    Lilja Bye, Bente

    2014-05-01

    Earth observations are important across the specter of geo-sciences. The Group on Earth Observations (GEO) is coordinating efforts to build a Global Earth Observation System of Systems, or GEOSS. The lack of dedicated funding to support specific Science &Technology activities in support of GEOSS is one of the most important obstacles to engaging the Science &Technology communities in its implementation. Finding resources to outreach and capacity building is likewise a challenge. The continuation of GEO and GEOSS rely on political support which again is influenced by public opinions. The GEO Ministerial Summit in 2014 was an event that both needed visibility and represented an opportunity to mobilize the GEO community in producing outreach and educational material. Through the combined resources from two of GEO tasks in the GEO work plan, a multipurpose educational outreach project was planned and executed. This project addressed the following issues: How can the GEO community mobilize resources for its work plan projects in the Societal Benefit Area Water? How can we produce more educational and capacity building material? How can the GEO community support the GEO secretariat related to public relations (material and otherwise) Based on activities described in the GEO work plan, a showcase video and online campaign consisting on a series of webinars were developed and produced. The video and webinars were linked through a common reference: the water cycle. Various aspects of the water cycle ranging from general to more technical and scientific education were covered in the webinars, while the video called A Modern Explorer's Journey focused on story telling with a more emotional appeal. The video was presented to the Ministers at the GEO Ministerial Summit and distributed widely to the GEO community and through social media and articles (as embedded YouTube and more). A discussion of challenges and successes of this event-based educational outreach project will be

  17. Effect of contact lens material on cytotoxicity potential of multipurpose solutions using human corneal epithelial cells

    PubMed Central

    Tanti, N.C.; Crockett, B.; Mansour, L.; Jones, L.

    2011-01-01

    Purpose Multipurpose solutions (MPS) are used daily to clean and disinfect silicone hydrogel (SiHy) contact lenses. This in vitro study was undertaken to identify the potential for interaction between MPS, SiHy surface treatments, and lens materials, which may lead to changes in the response of human corneal epithelial cells (HCEC) to MPS-soaked lenses. Methods The MPS tested were renu fresh (formerly known as ReNu MultiPlus; ReNu), OptiFree Express (OFX), OptiFree RepleniSH, SoloCare Aqua, and Complete Moisture Plus. The SiHy materials evaluated were lotrafilcon A, lotrafilcon B, comfilcon A, galyfilcon A, and balafilcon A (BA). MPS-soaked lenses were placed on top of adherent HCEC. The effect of MPS dilutions (0.1 to 10% final concentration in medium) was also characterized. Cell viability, adhesion phenotype and caspase activation were studied after 24-h cell exposure. OFX released from lenses was determined using UV absorbance. Results A significant reduction in viability (between 30 to 50%) was observed with cells exposed to lenses soaked in ReNu and OFX. A significant downregulation of α3 and β1 integrins, with integrin expression ranging from 60% to 75% of control (cells with no lens), was also observed with OFX and ReNu-soaked lenses. With the exception of BA, all other lenses soaked in OFX resulted in significant caspase activation, whereby over 18% of cells stained positive for caspases. Minimal caspase activation was observed in cells exposed to ReNu and Solo soaked lenses. For both OFX and ReNu, exposing cells to at least a 5% dilution had a significant effect on viability and integrin expression. While Complete and Solo did not lead to reduction in viability, cells exposed to a 10% dilution showed reduced integrin expression down to less than 70% of control value. Comparing cell response to diluted MPS solutions and various MPS-soaked lenses showed that it is not possible to reliably use cell response to MPS dilution alone to assess MPS

  18. NASA Planning for Orion Multi-Purpose Crew Vehicle Ground Operations

    NASA Technical Reports Server (NTRS)

    Letchworth, Gary; Schlierf, Roland

    2011-01-01

    tools included Kaizen/Lean events, mockups and human factors analysis. The majority of products developed by this team are applicable as KSC prepares 21st Century Ground Systems for the Orion Multi-Purpose Crew Vehicle and Space Launch System.

  19. Multi-purpose utility of circulating plasma DNA testing in patients with advanced cancers.

    PubMed

    Perkins, Geraldine; Yap, Timothy A; Pope, Lorna; Cassidy, Amy M; Dukes, Juliet P; Riisnaes, Ruth; Massard, Christophe; Cassier, Philippe A; Miranda, Susana; Clark, Jeremy; Denholm, Katie A; Thway, Khin; Gonzalez De Castro, David; Attard, Gerhardt; Molife, L Rhoda; Kaye, Stan B; Banerji, Udai; de Bono, Johann S

    2012-01-01

    biomarker studies have clinically important multi-purpose utility in advanced cancer patients and further studies to pursue their incorporation into the standard of care are warranted.

  20. A Multi-Purpose Data Dissemination Infrastructure for the Marine-Earth Observations

    NASA Astrophysics Data System (ADS)

    Hanafusa, Y.; Saito, H.; Kayo, M.; Suzuki, H.

    2015-12-01

    To open the data from a variety of observations, the Japan Agency for Marine-Earth Science and Technology (JAMSTEC) has developed a multi-purpose data dissemination infrastructure. Although many observations have been made in the earth science, all the data are not opened completely. We think data centers may provide researchers with a universal data dissemination service which can handle various kinds of observation data with little effort. For this purpose JAMSTEC Data Management Office has developed the "Information Catalog Infrastructure System (Catalog System)". This is a kind of catalog management system which can create, renew and delete catalogs (= databases) and has following features, - The Catalog System does not depend on data types or granularity of data records. - By registering a new metadata schema to the system, a new database can be created on the same system without sytem modification. - As web pages are defined by the cascading style sheets, databases have different look and feel, and operability. - The Catalog System provides databases with basic search tools; search by text, selection from a category tree, and selection from a time line chart. - For domestic users it creates the Japanese and English pages at the same time and has dictionary to control terminology and proper noun. As of August 2015 JAMSTEC operates 7 databases on the Catalog System. We expect to transfer existing databases to this system, or create new databases on it. In comparison with a dedicated database developed for the specific dataset, the Catalog System is suitable for the dissemination of small datasets, with minimum cost. Metadata held in the catalogs may be transfered to other metadata schema to exchange global databases or portals. Examples: JAMSTEC Data Catalog: http://www.godac.jamstec.go.jp/catalog/data_catalog/metadataList?lang=enJAMSTEC Document Catalog: http://www.godac.jamstec.go.jp/catalog/doc_catalog/metadataList?lang=en&tab=categoryResearch Information

  1. Effect of rare-earth doping in RCrSb3 (R = La, Pr, Sm, and Gd)

    SciTech Connect

    Jackson, D D; Fisk, Z

    2005-11-08

    We report on the electrical resistivity and magnetic susceptibility of La or Gd doped RCrSb{sub 3} (R=La, Pr, Sm, and Gd). Single crystals were grown by increasing the nominal dopant by 25%. In general, two magnetic ordering transitions are found, T{sub C1} is attributed to ferromagnetic ordering of the itinerant Cr sub-lattice, and, at lower temperatures, T{sub C2} is attributed to ordering of the localized rare-earth sub-lattice. Alloying on the rare-earth site varies the de Gennes factor, DG = (g-1){sup 2}J(J+1), and dT{sub C1}/d(DG) = -2K, while dT{sub C2}/d(DG) = 5K. These ordering temperatures are found to converge at GdCrSb{sub 3}, where a single ferrimagnetic transition is found at T{sub C2} = 86 K due to an anti-alignment of the itinerant Cr moments and the localized rare-earth moments. Initially, for DG < 3.5, the rare-earth moments are found to align ferromagnetically, and the paramagnetic Weiss temperature decreases at the same rate as T{sub C1}. But for DG > 4.5, the rare-earth sub-lattice anti-alignes with respect to the Cr sub-lattice, and the Weiss temperature decreases five times as fast. In the region between (3.5 < DG < 4.5), a first order phase transition is found at T{sub C2}.

  2. The structure of (3R)-hydroxyacyl-acyl carrier protein dehydratase (FabZ) from Pseudomonas aeruginosa.

    PubMed

    Kimber, Matthew S; Martin, Fernando; Lu, Yingjie; Houston, Simon; Vedadi, Masoud; Dharamsi, Akil; Fiebig, Klaus M; Schmid, Molly; Rock, Charles O

    2004-12-10

    Type II fatty acid biosynthesis systems are essential for membrane formation in bacteria, making the constituent proteins of this pathway attractive targets for antibacterial drug discovery. The third step in the elongation cycle of the type II fatty acid biosynthesis is catalyzed by beta-hydroxyacyl-(acyl carrier protein) (ACP) dehydratase. There are two isoforms. FabZ, which catalyzes the dehydration of (3R)-hydroxyacyl-ACP to trans-2-acyl-ACP, is a universally expressed component of the bacterial type II system. FabA, the second isoform, as has more limited distribution in nature and, in addition to dehydration, also carries out the isomerization of trans-2- to cis-3-decenoyl-ACP as an essential step in unsaturated fatty acid biosynthesis. We report the structure of FabZ from the important human pathogen Pseudomonas aeruginosa at 2.5 A of resolution. PaFabZ is a hexamer (trimer of dimers) with the His/Glu catalytic dyad located within a deep, narrow tunnel formed at the dimer interface. Site-directed mutagenesis experiments showed that the obvious differences in the active site residues that distinguish the FabA and FabZ subfamilies of dehydratases do not account for the unique ability of FabA to catalyze isomerization. Because the catalytic machinery of the two enzymes is practically indistinguishable, the structural differences observed in the shape of the substrate binding channels of FabA and FabZ lead us to hypothesize that the different shapes of the tunnels control the conformation and positioning of the bound substrate, allowing FabA, but not FabZ, to catalyze the isomerization reaction.

  3. Comparative analysis of a putative tuberculosis-susceptibility gene, MC3R, and pseudogene sequences in cattle, African buffalo, hyena, rhinoceros and other African bovids and ruminants.

    PubMed

    Müller, A; Möller, M; Adams, L A; Warren, R M; Hoal, E G; van Helden, P D

    2012-01-01

    Studies in humans have suggested the possible involvement of melanocortin-3-receptor (MC3R) and other components of the central melanocortin system in host defense against mycobacteria. We report a genomic DNA nucleotide sequence highly homologous to human MC3R in several bovids and non-bovid African wildlife species. Nucleotide sequence analysis indicates that the orthologous genes of cattle and buffalo are highly homologous (89.4 and 90%, respectively) to the human MC3R gene. Sequence results also identified a typical non-functional, duplicated pseudogene, MC3RP, in 7 species from the family Bovidae. No pseudogene was found in animals outside Bovidae. The presence of the pseudogene in tuberculosis-susceptible species could have possible immunomodulatory effects on susceptibility to bovine tuberculosis infection, as well as a considerable influence on energy metabolism and food conversion efficiency. PMID:22286663

  4. Comparative analysis of a putative tuberculosis-susceptibility gene, MC3R, and pseudogene sequences in cattle, African buffalo, hyena, rhinoceros and other African bovids and ruminants.

    PubMed

    Müller, A; Möller, M; Adams, L A; Warren, R M; Hoal, E G; van Helden, P D

    2012-01-01

    Studies in humans have suggested the possible involvement of melanocortin-3-receptor (MC3R) and other components of the central melanocortin system in host defense against mycobacteria. We report a genomic DNA nucleotide sequence highly homologous to human MC3R in several bovids and non-bovid African wildlife species. Nucleotide sequence analysis indicates that the orthologous genes of cattle and buffalo are highly homologous (89.4 and 90%, respectively) to the human MC3R gene. Sequence results also identified a typical non-functional, duplicated pseudogene, MC3RP, in 7 species from the family Bovidae. No pseudogene was found in animals outside Bovidae. The presence of the pseudogene in tuberculosis-susceptible species could have possible immunomodulatory effects on susceptibility to bovine tuberculosis infection, as well as a considerable influence on energy metabolism and food conversion efficiency.

  5. Vegetative and reproductive phenology of some multipurpose tree species in the homegardens of Barak Valley, northeast India

    NASA Astrophysics Data System (ADS)

    Das, Tapasi; Das, Ashesh Kumar

    2013-01-01

    Traditional homegardens are an important component of the farming systems in many rural communities and have been highlighted considerably due to their sustainability and role in the conservation of biodiversity. However, the functional aspect of the homegardens, which includes the phenological behavior of the dominant tree species in such agroforestry systems, has been undermined till date, and there is a lack of adequate data on this aspect of the traditional homegardens. As a step in this direction the present study was carried out to determine the phenological behavior of important multipurpose trees in the homegardens of the village of Dargakona, Assam, northeast India. The study revealed the dominance of periodic growth deciduous species from a total of 25 tree species selected for phenological observation. The diversity of multipurpose trees in the homegardens is represented by different plant functional types with different phenological behavior which showed significant changes in their responses to inter-annual climatic variations. The diversity of tree species with different phenological behavior has implications for the temporal partitioning of resources, especially during periods of scarcity, thereby resulting in efficient utilization of resources such as water. Also the diverse phenological behavior plays an important role in regulating the food supply for the herbivore population and the year-round availability of products, and such information can be useful in the selection of species for integration into other agroforestry systems which can be sustainable in the long run.

  6. A target field design of open multi-purpose RF coil for musculoskeletal MR imaging at 3T.

    PubMed

    Gao, Fei; Zhang, Rui; Zhou, Diange; Wang, Xiaoying; Huang, Kefu; Zhang, Jue

    2016-10-01

    Musculoskeletal MR imaging under multi-angle situations plays an increasingly important role in assessing joint and muscle tissues system. However, there are still limitations due to the closed structures of most conventional RF coils. In this study, a time-harmonic target-field method was employed to design open multi-purpose coil (OMC) for multi-angle musculoskeletal MR imaging. The phantom imaging results suggested that the proposed OMC could achieve homogeneously distributed magnetic field and high signal-to-noise ratio (SNR) of 239.04±0.83 in the region of interest (ROI). The maximum temperature in the heating hazard test was 16°C lower than the standard regulation, which indicated the security of the designed OMC. Furthermore, to demonstrate the effectiveness of the proposed OMC for musculoskeletal MR imaging, especially for multi-angle imaging, a healthy volunteer was examined for MR imaging of elbow, ankle and knee using OMC. The in vivo imaging results showed that the proposed OMC is effective for MR imaging of musculoskeletal tissues at different body parts, with satisfied B1 field homogeneity and SNR. Moreover, the open structure of the OMC could provide a large joint movement region. The proposed open multi-purpose coil is feasible for musculoskeletal MR imaging, and potentially, it is more suitable for the evaluation of musculoskeletal tissues under multi-angle conditions.

  7. Vegetative and reproductive phenology of some multipurpose tree species in the homegardens of Barak Valley, northeast India.

    PubMed

    Das, Tapasi; Das, Ashesh Kumar

    2013-01-01

    Traditional homegardens are an important component of the farming systems in many rural communities and have been highlighted considerably due to their sustainability and role in the conservation of biodiversity. However, the functional aspect of the homegardens, which includes the phenological behavior of the dominant tree species in such agroforestry systems, has been undermined till date, and there is a lack of adequate data on this aspect of the traditional homegardens. As a step in this direction the present study was carried out to determine the phenological behavior of important multipurpose trees in the homegardens of the village of Dargakona, Assam, northeast India. The study revealed the dominance of periodic growth deciduous species from a total of 25 tree species selected for phenological observation. The diversity of multipurpose trees in the homegardens is represented by different plant functional types with different phenological behavior which showed significant changes in their responses to inter-annual climatic variations. The diversity of tree species with different phenological behavior has implications for the temporal partitioning of resources, especially during periods of scarcity, thereby resulting in efficient utilization of resources such as water. Also the diverse phenological behavior plays an important role in regulating the food supply for the herbivore population and the year-round availability of products, and such information can be useful in the selection of species for integration into other agroforestry systems which can be sustainable in the long run.

  8. Development of a multipurpose beam foil spectroscopy set-up for the low cross-section measurements

    NASA Astrophysics Data System (ADS)

    Sharma, Gaurav; Nandi, T.; Berry, H. G.; Puri, Nitin K.

    2016-08-01

    A multipurpose facility for low cross section measurements has been developed at Inter University Accelerator Centre, New Delhi, India. The facility consists of a multipurpose miniature chamber equipped with 1 m focal length normal incidence Monochromator and charge coupled device based detection system which has been aligned to realize the best resolution of the spectrometer. The chamber in this facility collects radiation 100 times more efficiently from the older system, without using any extra focusing mirror assembly. It is ensured to have the provision of mounting an X-ray detector and the spectrometer transverse to the beam direction simultaneously in the same chamber. The atomic spectroscopic studies can be performed by interaction of ions beams with both thin foil and gas targets. Provision for using photomultiplier tube instead of charge coupled device, is employed in the system depending on the condition of the source strength or other detection issues. We observed the essence of a very weak atomic phenomenon, a triply excited autoionizing forbidden transition, using the above facility to demonstrate its capability for measuring such low cross section phenomena. The present developed facility covers a large spectroscopic region from X-rays to the near infrared (0.1-10,000 Å).

  9. A review of the developments of multi-purpose primers and adhesives comprising novel dithiooctanoate monomers and phosphonic acid monomers.

    PubMed

    Ikemura, Kunio; Endo, Takeshi; Kadoma, Yoshinori

    2012-02-01

    This paper reviews the developments of dithiooctanoate monomers and acidic adhesive monomers, and their roles in multi-purpose primers and adhesives in promoting adhesion to multiple substrate materials. Novel dithiooctanoate monomers exhibited excellent bonding to precious metals and alloys when compared against conventional sulfur-containing monomers. Newly developed phosphonic acid monomers, endowed with a water-soluble nature, enabled sufficient demineralization of dental hard tissues and thus improved bonding to both ground enamel and dentin. The optimal combination for bonding to dental hard tissues and precious and non-precious metals and alloys was 5.0 wt% 10-methacryloyloxydecyl 6,8-dithiooctanoate (10-MDDT) and 1.0 wt% 6-methacryloyloxyhexyl phosphonoacetate (6-MHPA). For bonding to dental porcelain, alumina, zirconia, and gold (Au) alloy, a ternary combination of silane coupling agent, acidic adhesive monomers, and dithiooctanoate monomers seemed promising. The latest development was a single-bottle, multi-purpose, self-etching adhesive which contained only acidic adhesive monomers and dithiooctanoate monomers but which produced strong adhesion to ground enamel and dentin, sandblasted zirconia, and Au alloy.

  10. Vegetative and reproductive phenology of some multipurpose tree species in the homegardens of Barak Valley, northeast India.

    PubMed

    Das, Tapasi; Das, Ashesh Kumar

    2013-01-01

    Traditional homegardens are an important component of the farming systems in many rural communities and have been highlighted considerably due to their sustainability and role in the conservation of biodiversity. However, the functional aspect of the homegardens, which includes the phenological behavior of the dominant tree species in such agroforestry systems, has been undermined till date, and there is a lack of adequate data on this aspect of the traditional homegardens. As a step in this direction the present study was carried out to determine the phenological behavior of important multipurpose trees in the homegardens of the village of Dargakona, Assam, northeast India. The study revealed the dominance of periodic growth deciduous species from a total of 25 tree species selected for phenological observation. The diversity of multipurpose trees in the homegardens is represented by different plant functional types with different phenological behavior which showed significant changes in their responses to inter-annual climatic variations. The diversity of tree species with different phenological behavior has implications for the temporal partitioning of resources, especially during periods of scarcity, thereby resulting in efficient utilization of resources such as water. Also the diverse phenological behavior plays an important role in regulating the food supply for the herbivore population and the year-round availability of products, and such information can be useful in the selection of species for integration into other agroforestry systems which can be sustainable in the long run. PMID:22555388

  11. 2020 Foresight Forging the Future of Lawrence Livermore National Laboratory

    SciTech Connect

    Chrzanowski, P.

    2000-01-01

    The Lawrence Livermore National Laboratory (LLNL) of 2020 will look much different from the LLNL of today and vastly different from how it looked twenty years ago. We, the members of the Long-Range Strategy Project, envision a Laboratory not defined by one program--nuclear weapons research--but by several core programs related to or synergistic with LLNL's national security mission. We expect the Laboratory to be fully engaged with sponsors and the local community and closely partnering with other research and development (R&D) organizations and academia. Unclassified work will be a vital part of the Laboratory of 2020 and will visibly demonstrate LLNL's international science and technology strengths. We firmly believe that there will be a critical and continuing role for the Laboratory. As a dynamic and versatile multipurpose laboratory with a national security focus, LLNL will be applying its capabilities in science and technology to meet the needs of the nation in the 21st century. With strategic investments in science, outstanding technical capabilities, and effective relationships, the Laboratory will, we believe, continue to play a key role in securing the nation's future.

  12. S2P3-R (v1.0): a framework for efficient regional modelling of physical and biological structures and processes in shelf seas

    NASA Astrophysics Data System (ADS)

    Marsh, R.; Hickman, A. E.; Sharples, J.

    2015-10-01

    An established one-dimensional (1-D) model of Shelf Sea Physics and Primary Production (S2P3) is adapted for flexible use in selected regional settings over selected periods of time. This Regional adaptation of S2P3, the S2P3-R framework (v1.0), can be efficiently used to investigate physical and biological phenomena in shelf seas that are strongly controlled by vertical processes. These include spring blooms that follow the onset of stratification, tidal mixing fronts that seasonally develop at boundaries between mixed and stratified water, and sub-surface chlorophyll maxima that persist throughout summer. While not representing 3-D processes, S2P3-R reveals the horizontal variation of the key 1-D (vertical) processes. S2P3-R should therefore only be used in regions where horizontal processes - including mean flows, eddy fluxes and internal tides - are known to exert a weak influence in comparison with vertical processes. In such cases, S2P3-R may be used as a highly versatile research tool, alongside more complex and computationally expensive models. In undergraduate oceanography modules and research projects, the model serves as an effective practical tool for linking theory and field observations. Three different regional configurations of S2P3-R are described, illustrating a range of diagnostics, evaluated where practical with observations. The model can be forced with daily meteorological variables for any selected year in the reanalysis era (1948 onwards). Example simulations illustrate the considerable extent of synoptic-to-interannual variability in the physics and biology of shelf seas. In discussion, the present limitations of S2P3-R are emphasised, and future developments are outlined.

  13. Phase transformation of Cu-rich precipitates from 9R to 3R variant via ledges mechanism in ferritic steel containing copper.

    PubMed

    Chen, B L; Wang, W; Xie, H; Ge, R R; Zhang, Z Y; Li, Z W; Zhou, X Y; Zhou, B X

    2016-04-01

    Precipitates and solute enrich in aged ferritic steel containing copper were examined using high-resolution electron microscopy, high-angle annular dark-field scanning transmission electron microscopy and energy-dispersive X-ray spectroscopy. Two ledges with one-atom and two-atom layers height in the 9R/3R interface were observed. The enrichment of copper into two successive closed-packed planes with an interval of Fe-rich close-packed plane was detected. The passage of the Shockley partial, or the shearing, changes the stacking sequence of closed-packed planes. Finally, 9R Cu variant transformed into 3R Cu variant. PMID:26599818

  14. Phase transformation of Cu-rich precipitates from 9R to 3R variant via ledges mechanism in ferritic steel containing copper.

    PubMed

    Chen, B L; Wang, W; Xie, H; Ge, R R; Zhang, Z Y; Li, Z W; Zhou, X Y; Zhou, B X

    2016-04-01

    Precipitates and solute enrich in aged ferritic steel containing copper were examined using high-resolution electron microscopy, high-angle annular dark-field scanning transmission electron microscopy and energy-dispersive X-ray spectroscopy. Two ledges with one-atom and two-atom layers height in the 9R/3R interface were observed. The enrichment of copper into two successive closed-packed planes with an interval of Fe-rich close-packed plane was detected. The passage of the Shockley partial, or the shearing, changes the stacking sequence of closed-packed planes. Finally, 9R Cu variant transformed into 3R Cu variant.

  15. Neomorphic Mutations in PIK3R1 Confer Sensitivity to MAPK Inhibitors due to Activation of ERK and JNK Pathways | Office of Cancer Genomics

    Cancer.gov

    In a recent publication in Cancer Cell, CTD2 investigators discovered that a known cancer-associated gain-of-function alteration in phosphoinositide-3-kinase regulatory subunit 1 (PIK3R1) results in novel protein activity that confers sensitivity to mitogen-activated protein kinase (MAPK) inhibitors. The PIK3R1 gene encodes the p85α regulatory subunit of PIK3. Under normal conditions, p85α suppresses PIK3 mediated activation of downstream pathways that promote cell growth and survival.

  16. 15 CFR Supplement No. 1 to Part 752 - Instructions for Completing Form BIS-748P, Multipurpose Application for Requests for Special...

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ...-748P, Multipurpose Application for Requests for Special Comprehensive Licenses No. Supplement No. 1 to... COMPREHENSIVE LICENSE Pt. 752, Supp. 1 Supplement No. 1 to Part 752—Instructions for Completing Form BIS-748P... instructions in Supplement No. 1 to part 748 of the EAR. Block 5: Type of Application. Enter an “x” in...

  17. 15 CFR Supplement No. 1 to Part 752 - Instructions for Completing Form BIS-748P, Multipurpose Application for Requests for Special...

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ...-748P, Multipurpose Application for Requests for Special Comprehensive Licenses No. Supplement No. 1 to... COMPREHENSIVE LICENSE Pt. 752, Supp. 1 Supplement No. 1 to Part 752—Instructions for Completing Form BIS-748P... instructions in Supplement No. 1 to part 748 of the EAR. Block 5: Type of Application. Enter an “x” in...

  18. 15 CFR Supplement No. 1 to Part 752 - Instructions for Completing Form BIS-748P, Multipurpose Application for Requests for Special...

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ...-748P, Multipurpose Application for Requests for Special Comprehensive Licenses No. Supplement No. 1 to... COMPREHENSIVE LICENSE Pt. 752, Supp. 1 Supplement No. 1 to Part 752—Instructions for Completing Form BIS-748P... instructions in supplement No. 1 to part 748 of the EAR. Block 5: Type of Application. Enter an “x” in...

  19. 15 CFR Supplement No. 1 to Part 752 - Instructions for Completing Form BIS-748P, Multipurpose Application for Requests for Special...

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ...-748P, Multipurpose Application for Requests for Special Comprehensive Licenses No. Supplement No. 1 to... COMPREHENSIVE LICENSE Pt. 752, Supp. 1 Supplement No. 1 to Part 752—Instructions for Completing Form BIS-748P... instructions in Supplement No. 1 to part 748 of the EAR. Block 5: Type of Application. Enter an “x” in...

  20. 15 CFR Supplement No. 1 to Part 752 - Instructions for Completing Form BIS-748P, Multipurpose Application for Requests for Special...

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ...-748P, Multipurpose Application for Requests for Special Comprehensive Licenses No. Supplement No. 1 to... COMPREHENSIVE LICENSE Pt. 752, Supp. 1 Supplement No. 1 to Part 752—Instructions for Completing Form BIS-748P... instructions in Supplement No. 1 to part 748 of the EAR. Block 5: Type of Application. Enter an “x” in...

  1. A Multipurpose Apparatus to Measure Viscosity and Surface Tension of Solutions: The Measurement of the Molecular Cross-Sectional Area of N-Proposal

    ERIC Educational Resources Information Center

    Xin Zhang; Shouxin Liu; Booxin Li; Na An; Fan Zhang

    2004-01-01

    A multipurpose apparatus that can be used to measure the viscosity of solution by the Ostwald method and the surface tension of solution by the drop-weight method or by the capillary-rise method is developed. The apparatus is convenient for in-situ preparation of solutions of different concentrations and avoids the error that frothing of the…

  2. Enhanced fullerene–Au(111) coupling in (2√3 × 2√3)R30° superstructures with intermolecular interactions

    PubMed Central

    Paßens, Michael; Waser, Rainer

    2015-01-01

    Summary Disordered and uniform (2√3 × 2√3)R30° superstructures of fullerenes on the Au(111) surface have been studied using scanning tunneling microscopy and spectroscopy. It is shown that the deposition and growth process of a fullerene monolayer on the Au(111) surface determine the resulting superstructure. The supply of thermal energy is of importance for the activation of a Au vacancy forming process and thus, one criterion for the selection of the respective superstructure. However, here it is depicted that a vacancy–adatom pair can be formed even at room temperature. This latter process results in C60 molecules that appear slightly more bright in scanning tunnelling microscopy images and are identified in disordered (2√3 x 2√3)R30° superstructures based on a detailed structure analysis. In addition, these slightly more bright C60 molecules form uniform (2√3 x 2√3)R30° superstructures, which exhibit intermolecular interactions, likely mediated by Au adatoms. Thus, vacancy–adatom pairs forming at room temperature directly affect the resulting C60 superstructure. Differential conductivity spectra reveal a lifting of the degeneracy of the LUMO and LUMO+1 orbitals in the uniform (2√3 x 2√3)R30° superstructure and in addition, hybrid fullerene–Au(111) surface states suggest partly covalent interactions. PMID:26199846

  3. Interaction transfer of silicon atoms forming Co silicide for Co/√(3)×√(3)R30°-Ag/Si(111) and related magnetic properties

    SciTech Connect

    Chang, Cheng-Hsun-Tony; Fu, Tsu-Yi; Tsay, Jyh-Shen

    2015-05-07

    Combined scanning tunneling microscopy, Auger electron spectroscopy, and surface magneto-optic Kerr effect studies were employed to study the microscopic structures and magnetic properties for ultrathin Co/√(3)×√(3)R30°-Ag/Si(111). As the annealing temperature increases, the upward diffusion of Si atoms and formation of Co silicides occurs at temperature above 400 K. Below 600 K, the √(3)×√(3)R30°-Ag/Si(111) surface structure persists. We propose an interaction transferring mechanism of Si atoms across the √(3)×√(3)R30°-Ag layer. The upward transferred Si atoms react with Co atoms to form Co silicide. The step height across the edge of the island, a separation of 0.75 nm from the analysis of the 2 × 2 structure, and the calculations of the normalized Auger signal serve as strong evidences for the formation of CoSi{sub 2} at the interface. The interaction transferring mechanism for Si atoms enhances the possibility of interactions between Co and Si atoms. The smoothness of the surface is advantage for that the easy axis of magnetization for Co/√(3)×√(3)R30°-Ag/Si(111) is in the surface plane. This provides a possible way of growing flat magnetic layers on silicon substrate with controllable silicide formation and shows potential applications in spintronics devices.

  4. Polymorphisms of the bovine MC3R gene and their associations with body measurement traits and meat quality traits in Qinchuan cattle.

    PubMed

    Yang, W-C; Wang, Y-N; Cui, A; Zan, L-S

    2015-10-05

    The melanocortin 3 receptor (MC3R) gene, which belongs to the rhodopsin-like family A of the G protein-coupled receptor family, plays a crucial role in feed efficiency and energy homeostasis. The aim of this study was to examine associations between bovine MC3R gene polymorphisms and body measurement traits (BMTs) and meat quality traits (MQTs). We identified three synonymous mutations (T429C, T537C, and T663C) in exon 1 of the MC3R gene in Chinese Qinchuan beef cattle (N = 271) by sequencing. D' and r(2) values revealed that these three SNPs were in strong linkage disequilibrium (LD) (r(2) > 0.33); the T429C and T537C SNPs were in complete LD (D' = 1 and r(2) = 1). Association analyses revealed that the SNPs were significantly associated with BMTs and MQTs in Qinchuan cattle. Individuals with the wild homozygotic genotypes g.TTTT and g.TT had significantly higher values of chest depth, heart girth, back fat thickness, intramuscular fat content, and loin muscle area than the mutant heterozygotic genotypes g.TCTC and g.TC. These results suggest that the MC3R gene affects MQTs in Qinchuan cattle, and that it may be a good candidate gene for marker-assisted selection.

  5. Alcohol-induced blood-brain barrier dysfunction is mediated via inositol 1,4,5-triphosphate receptor (IP3R)-gated intracellular calcium release.

    PubMed

    Haorah, James; Knipe, Bryan; Gorantla, Santhi; Zheng, Jialin; Persidsky, Yuri

    2007-01-01

    The blood-brain barrier (BBB) formed by brain microvascular endothelial cells (BMVEC), pericytes and astrocytes controls the transport of ions, peptides and leukocytes in and out of the brain. Tight junctions (TJ) composed of TJ proteins (occludin, claudins and zonula occludens) ensure the structural integrity of the BMVEC monolayer. Neuropathologic studies indicated that the BBB was impaired in alcohol abusers; however, the underlying mechanism of BBB dysfunction remains elusive. Using primary human BMVEC, we previously demonstrated that oxidative stress induced by ethanol (EtOH) metabolism in BMVEC activated myosin light chain kinase (MLCK), resulting in the enhanced phosphorylation of either cytoskeletal or TJ proteins, and in BBB impairment. We proposed that EtOH metabolites stimulated inositol 1,4,5-triphosphate receptor (IP(3)R)-operated intracellular calcium (Ca(2+)) release, thereby causing the activation of MLCK in BMVEC. Indeed, treatment of primary human BMVEC with EtOH or its metabolites resulted in the increased expression of IP(3)R protein and IP(3)R-gated intracellular Ca(2+) release. These functional changes paralleled MLCK activation, phosphorylation of cytoskeletal/TJ proteins, loss of BBB integrity, and enhanced leukocyte migration across BMVEC monolayers. Inhibition of either EtOH metabolism or IP(3)R activation prevented BBB impairment. These findings suggest that EtOH metabolites act as signaling molecules for the activation of MLCK via the stimulation of IP(3)R-gated intracellular Ca(2+) release in BMVEC. These putative events can lead to BBB dysfunction in the setting of alcoholism, and to neuro-inflammatory disorders promoting leukocyte migration across the BBB.

  6. Orion Multi-Purpose Crew Vehicle Active Thermal Control and Environmental Control and Life Support Development Status

    NASA Technical Reports Server (NTRS)

    Lewis, John F.; Barido, Richard A.; Cross, Cynthia D.; Rains, George Edward

    2013-01-01

    The Orion Multi-Purpose Crew Vehicle (MPCV) is the first crew transport vehicle to be developed by the National Aeronautics and Space Administration (NASA) in the last thirty years. Orion is currently being developed to transport the crew safely beyond Earth orbit. This year, the vehicle focused on building the Exploration Flight Test 1 (EFT1) vehicle to be launched in 2014. The development of the Orion Environmental Control and Life Support (ECLS) System, focused on the completing the components which are on EFT1. Additional development work has been done to keep the remaining component progressing towards implementation for a flight tests in of EM1 in 2017 and in and EM2 in 2020. This paper covers the Orion ECLS development from April 2012 to April 2013.

  7. Multipurpose optic-electronic autocollimators for measuring deformations of the axle with a millimeter wave range radiotelescope

    NASA Astrophysics Data System (ADS)

    Konyakhin, Igor; Molev, Fedor; Konyakhin, Alexey; Li, Renpu

    2015-02-01

    The improved autocollimators for measuring angular deformations of the large constructions as support tube of mirror and elevation axle of the radio telescopes are analyzed. Two new types of the reflector for autocollimator are researched. The first type of the reflectors is the tetrahedral reflector with flat reflecting sides and invariant axis. The autocollimator with tetrahedral reflector is used for the measuring 3-D deformations as roll, pitch and yaw angular deviations. The second type of the reflector is the composition of the anamorphic wedge system and ordinary cube-corner retroreflector. This reflector generates the narrow beam, as result the work distance and the range of measurement of the roll angle increase. Technical characteristics of the experimental setups of new reflectors are presented. Features of the tetrahedral reflector and anamorphic system as the reflectors for multipurpose autocollimator are discussed.

  8. Environmental assessment for the reuse of TNX as a multi-purpose pilot plant campus at the Savannah River Site

    SciTech Connect

    1998-07-01

    The Department of Energy (DOE) prepared this environmental assessment (EA) to analyze the potential environmental and safety impacts of DOE planning to allow asset reuse of the TNX Area at the Savannah River Site (SRS) located near Aiken, South Carolina. The proposed action would include providing for a location for the Centers of Excellence at or adjacent to SRS and entering into a cooperative agreement with a non-profit management and operations (management firm) contractor to operate and market the TNX facilities and equipment. The area (formerly TNX) would be called a Multi-Purpose Pilot Plant Campus (MPPC) and would be used: (1) as location for technology research, development, demonstration, and commercial operations; (2) to establish partnerships with industry to develop applied technologies for commercialization; and (3) serve as administrative headquarters for Centers of Excellence in the program areas of soil remediation, radioecology, groundwater contamination, and municipal solid waste minimization.

  9. Lunar laboratory

    SciTech Connect

    Keaton, P.W.; Duke, M.B.

    1986-01-01

    An international research laboratory can be established on the Moon in the early years of the 21st Century. It can be built using the transportation system now envisioned by NASA, which includes a space station for Earth orbital logistics and orbital transfer vehicles for Earth-Moon transportation. A scientific laboratory on the Moon would permit extended surface and subsurface geological exploration; long-duration experiments defining the lunar environment and its modification by surface activity; new classes of observations in astronomy; space plasma and fundamental physics experiments; and lunar resource development. The discovery of a lunar source for propellants may reduce the cost of constructing large permanent facilities in space and enhance other space programs such as Mars exploration. 29 refs.

  10. A new and compact system at the AMS laboratory in Bucharest

    NASA Astrophysics Data System (ADS)

    Stan-Sion, C.; Enachescu, M.; Petre, A. R.; Simion, C. A.; Calinescu, C. I.; Ghita, D. G.

    2015-10-01

    AMS research started more than 15 years ago at our National Institute for Physics and Nuclear Engineering (IFIN-HH), Bucharest. A first facility was constructed based on our multipurpose 9 MV tandem accelerator and was upgraded several times. In May 2012 a new Cockcroft Walton type 1 MV HVEE tandetron AMS system, was commissioned. Two chemistry laboratories were constructed and are routinely performing the target preparation for carbon dating and for other isotope applications such as for geology, environment physics, medicine and forensic physics. Performance parameters of the new system are shown.

  11. Laboratory accreditation

    SciTech Connect

    Pettit, R.B.

    1998-08-01

    Accreditation can offer many benefits to a testing or calibration laboratory, including increased marketability of services, reduced number of outside assessments, and improved quality of services. Compared to ISO 9000 registration, the accreditation process includes a review of the entire quality system, but in addition a review of testing or calibration procedures by a technical expert and participation in proficiency testing in the areas of accreditation. Within the DOE, several facilities have recently become accredited in the area of calibration, including Sandia National Laboratories, Oak Ridge, AlliedSignal FM and T; Lockheed Martin Idaho Technologies Co., and Pacific Northwest National Lab. At the national level, a new non-profit organization was recently formed called the National Cooperation for Laboratory Accreditation (NACLA). The goal of NACLA is to develop procedures, following national and international requirements, for the recognition of competent accreditation bodies in the US. NACLA is a voluntary partnership between the public and private sectors with the goal of a test or calibration performed once and accepted world wide. The NACLA accreditation body recognition process is based on the requirements of ISO Guide 25 and Guide 58. A membership drive will begin some time this fall to solicit organizational members and an election of a permanent NACLA Board of Directors will follow later this year or early 1999.

  12. De novo assembly and characterization of leaf transcriptome for the development of functional molecular markers of the extremophile multipurpose tree species Prosopis alba

    PubMed Central

    2013-01-01

    Background Prosopis alba (Fabaceae) is an important native tree adapted to arid and semiarid regions of north-western Argentina which is of great value as multipurpose species. Despite its importance, the genomic resources currently available for the entire Prosopis genus are still limited. Here we describe the development of a leaf transcriptome and the identification of new molecular markers that could support functional genetic studies in natural and domesticated populations of this genus. Results Next generation DNA pyrosequencing technology applied to P. alba transcripts produced a total of 1,103,231 raw reads with an average length of 421 bp. De novo assembling generated a set of 15,814 isotigs and 71,101 non-assembled sequences (singletons) with an average of 991 bp and 288 bp respectively. A total of 39,000 unique singletons were identified after clustering natural and artificial duplicates from pyrosequencing reads. Regarding the non-redundant sequences or unigenes, 22,095 out of 54,814 were successfully annotated with Gene Ontology terms. Moreover, simple sequence repeats (SSRs) and single nucleotide polymorphisms (SNPs) were searched, resulting in 5,992 and 6,236 markers, respectively, throughout the genome. For the validation of the the predicted SSR markers, a subset of 87 SSRs selected through functional annotation evidence was successfully amplified from six DNA samples of seedlings. From this analysis, 11 of these 87 SSRs were identified as polymorphic. Additionally, another set of 123 nuclear polymorphic SSRs were determined in silico, of which 50% have the probability of being effectively polymorphic. Conclusions This study generated a successful global analysis of the P. alba leaf transcriptome after bioinformatic and wet laboratory validations of RNA-Seq data. The limited set of molecular markers currently available will be significantly increased with the thousands of new markers that were identified in this study. This information will

  13. Increased Cortical Inhibition in Autism-Linked Neuroligin-3R451C Mice Is Due in Part to Loss of Endocannabinoid Signaling

    PubMed Central

    Speed, Haley E.; Masiulis, Irene; Gibson, Jay R.; Powell, Craig M.

    2015-01-01

    A single, maternally inherited, X-linked point mutation leading to an arginine to cysteine substitution at amino acid 451 (R451C) of Neuroligin 3 (NLGN3R451C) is a likely cause of autism in two brothers. Knockin mice expressing the Nlgn3R451C mutation in place of wild-type Nlgn3 demonstrate increased inhibitory synaptic strength in somatosensory cortex, resulting in an excitatory/inhibitory (E/I) imbalance that is potentially relevant for autism-associated behavioral deficits characteristic of these mice. We have replicated the increase in evoked inhibitory postsynaptic currents (eIPSCs) onto layer II/III cortical pyramidal neurons. We also find that increased frequency of spontaneous mIPSCs in Nlgn3R451C mice occurs in the absence of action potential-driven transmission. This suggests the E/I imbalance is due to changes at the synapse level, as opposed to the network level. Next, we use paired whole-cell recordings in an attempt to identify specific interneuron subtypes affected by the Nlgn3R451C mutation. Curiously, we observe no change in the amplitude of cell-to-cell, unitary IPSCs (uIPSCs) from parvalbumin-positive (PV) or somatostatin-positive (SOM) interneurons onto pyramidal neurons. We also observe no change in the number or density of PV and SOM interneurons in LII/III of somatosensory cortex. This effectively rules out a role for these particular interneurons in the increased inhibitory synaptic transmission, pointing to perhaps alternative interneuron subtypes. Lastly, impaired endocannabinoid signaling has been implicated in hippocampal synaptic dysfunction in Nlgn3R451C mice, but has not been investigated at cortical synapses. We find that bath application of the CB1 antagonist, AM 251 in WT mice eliminates the Nlgn3R451C increase in eIPSC amplitude and mIPSC frequency, indicating that increased inhibitory transmission in mutant mice is due, at least in part, to a loss of endocannabinoid signaling through CB1 receptors likely acting at interneurons

  14. Compositional Analysis of Asymmetric and Symmetric Dimethylated H3R2 Using Liquid Chromatography-Tandem Mass Spectrometry-Based Targeted Proteomics.

    PubMed

    Xu, Qingqing; Xu, Feifei; Liu, Liang; Chen, Yun

    2016-09-01

    Protein arginine methylation is one of the common post-translational modifications in cellular processes. To date, two isomeric forms of dimethylated arginine have been identified: asymmetric N(G),N(G)-dimethylarginine (aDMA), and symmetric N(G),N'(G)-dimethylarginine (sDMA). Evidence indicated that these isomers can coexist and have different or even opposite functions, with aDMA and sDMA forms of arginine 2 on histone H3 (i.e., H3R2me2a and H3R2me2s) being an example. Thus, specific detection and quantification of each isomeric form is important. Current methods are capable of predicting and detecting thousands of methylarginine sites in proteins, whereas differentiation and stoichiometric measurement of dimethylated protein isomers are still challenging. Liquid chromatography coupled with tandem mass spectrometry (LC-MS/MS)-based targeted proteomics has emerged as a promising technique for site-specific quantification of protein methylation using enzymatic peptides as surrogates of target proteins. However, it should be pointed out that a routine targeted proteomics strategy cannot easily distinguish sDMA- and aDMA-containing surrogate peptides due to their common nature. The estimated amount should be considered as the sum of both arginine dimethylated isomers. In this study, compositional analysis based on a linear algebra algorithm as an add-on to targeted proteomics was employed to quantify H3R2me2a and H3R2me2s (i.e., surrogate peptides of AR(me2a)TK(me1/2)QT and AR(me2s)TK(me1/2)QT). To achieve this simultaneous quantification, a targeted proteomics assay was developed and validated for each isomer first. With the slope and intercept of their calibration curves for each multiple reaction monitoring (MRM) transition, linear algebraic equations were derived. Using a series of mock mixtures consisting of isomers in varying concentrations, the reliability of the method was confirmed. Finally, the H3R2 dimethylation status was analyzed in normal MCF-10A cells

  15. Waste Reduction plan for Oak Ridge National Laboratory

    SciTech Connect

    Not Available

    1991-12-01

    Oak Ridge National Laboratory (ORNL) is a multipurpose research and development (R&D) facility owned and operated by the Department of Energy (DOE) and managed under subcontract by Martin Marietta Energy Systems (Energy Systems), Inc. ORNL R&D activities generate numerous small waste streams. In the hazardous waste category alone, over 300 streams of a diverse nature exist. Generation avoidance, reduction or recycling of wastes is an important goal in maintaining efficiency of ORNL R&D activities and protection of workers, the public, and the environment. Waste minimization is defined as any action that minimizes or eliminates the volume or toxicity of waste by avoiding its generation or recycling. This is accomplished by material substitution and inventory management, process modification, or recycling wastes for reuse. Waste reduction is defined as waste minimization plus treatment which results in volume or toxicity reduction. The ORNL Waste Reduction Program will include both waste minimization and waste reduction activities.

  16. Waste Reduction plan for Oak Ridge National Laboratory

    SciTech Connect

    Not Available

    1991-12-01

    Oak Ridge National Laboratory (ORNL) is a multipurpose research and development (R D) facility owned and operated by the Department of Energy (DOE) and managed under subcontract by Martin Marietta Energy Systems (Energy Systems), Inc. ORNL R D activities generate numerous small waste streams. In the hazardous waste category alone, over 300 streams of a diverse nature exist. Generation avoidance, reduction or recycling of wastes is an important goal in maintaining efficiency of ORNL R D activities and protection of workers, the public, and the environment. Waste minimization is defined as any action that minimizes or eliminates the volume or toxicity of waste by avoiding its generation or recycling. This is accomplished by material substitution and inventory management, process modification, or recycling wastes for reuse. Waste reduction is defined as waste minimization plus treatment which results in volume or toxicity reduction. The ORNL Waste Reduction Program will include both waste minimization and waste reduction activities.

  17. ESCRT machinery potentiates HIV-1 utilization of the PI(4,5)P(2)-PLC-IP3R-Ca(2+) signaling cascade.

    PubMed

    Ehrlich, Lorna S; Medina, Gisselle N; Carter, Carol A

    2011-10-21

    Human immunodeficiency virus type 1 (HIV-1) release efficiency is directed by late (L) domain motifs in the viral structural precursor polyprotein Gag, which serve as links to the ESCRT (endosomal sorting complex required for transport) machinery. Linkage is normally through binding of Tsg101, an ESCRT-1 component, to the P(7)TAP motif in the p6 region of Gag. In its absence, budding is directed by binding of Alix, an ESCRT adaptor protein, to the LY(36)PX(n)L motif in Gag. We recently showed that budding requires activation of the inositol 1,4,5-triphosphate receptor (IP3R), a protein that "gates" Ca(2+) release from intracellular stores, triggers Ca(2+) cell influx and thereby functions as a major regulator of Ca(2+) signaling. In the present study, we determined whether the L domain links Gag to Ca(2+) signaling machinery. Depletion of IP3R and inactivation of phospholipase C (PLC) inhibited budding whether or not Tsg101 was bound to Gag. PLC hydrolysis of phosphatidylinositol-(4,5)-bisphosphate generates inositol (1,4,5)-triphosphate, the ligand that activates IP3R. However, with Tsg101 bound, Gag release was independent of Gq-mediated activation of PLC, and budding was readily enhanced by pharmacological stimulation of PLC. Moreover, IP3R was redistributed to the cell periphery and cytosolic Ca(2+) was elevated, events indicative of induction of Ca(2+) signaling. The results suggest that L domain function, ESCRT machinery and Ca(2+) signaling are linked events in Gag release.

  18. Novel layered Li3V2(PO4)3/rGO&C sheets as high-rate and long-life lithium ion battery cathodes.

    PubMed

    Wei, Qiulong; Xu, Yanan; Li, Qidong; Tan, Shuangshuang; Ren, Wenhao; An, Qinyou; Mai, Liqiang

    2016-07-01

    Novel layered Li3V2(PO4)3/rGO&C sheets are synthesized by novel interfacial modified assembly, freeze-drying and confined annealing processes. The uniform LVP layers are alternated with rGO&C layers to form the composite layered structure, providing effective electron and ion transport. As a lithium-ion battery cathode, the composite displays excellent electrochemical performance. PMID:27334928

  19. Biochemical and histopathological evaluation of histamine receptors (H1R, H2R, H3R and H4R)-agonist in rabbits.

    PubMed

    Tripathi, Trivendra; Khan, Aijaz Ahmed; Shahid, Mohammad; Khan, Haris M; Siddiqui, Mashiatullah; Khan, Rahat Ali; Mahdi, Abbas Ali; Malik, Abida

    2013-03-01

    The present study was designed to investigate the biochemical and histopathological changes in the livers of rabbits treated with histamine and histamine receptors (H1R-H4R)-agonist. The cohort comprised of six groups containing five rabbits each. Control group received sterile distilled water (1 mL/kg × b.i.d.) and treated groups received subcutaneous histamine (100 μg/kg × b.i.d.) and H1R-H4R-agonist (histamine trifluoro-methyl toluidide, amthamine, R-[-]-α-methylhistamine, clobenpropit, respectively) each in a dose of 10 μg/kg × b.i.d. (12 h [8 am and 8 pm]) for 30 days. Hepatotoxicity due to these agonists was analyzed using biochemical and histopathological methods. Histamine and H1R-H3R-agonist were found to be hepatotoxic as shown by statistically significant (p < 0.05) elevated levels of alanine aminotransferase (ALT) and aspartate aminotransferase (AST), most marked in the H3R-agonist group. However, their levels in H4R-agonist group remained very similar to the control group. The entire drug treated groups as compared to control showed significant elevated levels of alkaline phosphatase (ALP). Histopathological examination revealed obvious changes in histamine, H2R- and H3R-agonist groups in terms of alteration of hepatic microstructure, congestion, focal necrosis and increased incidence of multinucleate hepatocytes while H1R and H4R groups showed minimal changes. From the findings of the present study it may be concluded that on repeated administration, histamine and HR-agonists-induced hepatotoxicity which is most pronounced with H3R-agonist though not severe enough to jeopardize the vital functions of liver and warrants further long-term studies.

  20. Novel 1D coordination polymer {l_brace}Tm(Piv){sub 3{r_brace}n}: Synthesis, structure, magnetic properties and thermal behavior

    SciTech Connect

    Fomina, Irina; Dobrokhotova, Zhanna; Aleksandrov, Grygory; Emelina, Anna; Bykov, Mikhail; Bogomyakov, Artem; Puntus, Lada; Novotortsev, Vladimir; Eremenko, Igor

    2012-01-15

    The new 1D coordination polymer {l_brace}Tm(Piv){sub 3{r_brace}n} (1), where Piv=OOCBu{sup t-}, was synthesized in high yield (>95%) by the reaction of thulium acetate with pivalic acid in air at 100 Degree-Sign S. According to the X-ray diffraction data, the metal atoms in compound 1 are in an octahedral ligand environment unusual for lanthanides. The magnetic and luminescence properties of polymer 1, it's the solid-phase thermal decomposition in air and under argon, and the thermal behavior in the temperature range of -50 Horizontal-Ellipsis +50 Degree-Sign S were investigated. The vaporization process of complex 1 was studied by the Knudsen effusion method combined with mass-spectrometric analysis of the gas-phase composition in the temperature range of 570-680 K. - Graphical Abstract: Novel 1D coordination polymer {l_brace}Tm(Piv){sub 3{r_brace}n} was synthesized and studied by X-ray diffraction. The magnetic, luminescence properties, the thermal behavior and the volatility for the compound {l_brace}Tm(Piv){sub 3{r_brace}n} were investigated. Black-Small-Square Highlights: Black-Right-Pointing-Pointer We synthesized the coordination polymer {l_brace}Tm(Piv){sub 3{r_brace}n}. Black-Right-Pointing-Pointer Tm atoms in polymer have the coordination number 6. Black-Right-Pointing-Pointer Polymer exhibits blue-color emission at room temperature. Black-Right-Pointing-Pointer Polymer shows high thermal stability and volatility. Black-Right-Pointing-Pointer Polymer has no phase transitions in the range of -50 Horizontal-Ellipsis +50 Degree-Sign S.

  1. Basal adenosine modulates the functional properties of AMPA receptors in mouse hippocampal neurons through the activation of A1R A2AR and A3R

    PubMed Central

    Di Angelantonio, Silvia; Bertollini, Cristina; Piccinin, Sonia; Rosito, Maria; Trettel, Flavia; Pagani, Francesca; Limatola, Cristina; Ragozzino, Davide

    2015-01-01

    Adenosine is a widespread neuromodulator within the CNS and its extracellular level is increased during hypoxia or intense synaptic activity, modulating pre- and postsynaptic sites. We studied the neuromodulatory action of adenosine on glutamatergic currents in the hippocampus, showing that activation of multiple adenosine receptors (ARs) by basal adenosine impacts postsynaptic site. Specifically, the stimulation of both A1R and A3R reduces AMPA currents, while A2AR has an opposite potentiating effect. The effect of ARs stimulation on glutamatergic currents in hippocampal cultures was investigated using pharmacological and genetic approaches. A3R inhibition by MRS1523 increased GluR1-Ser845 phosphorylation and potentiated AMPA current amplitude, increasing the apparent affinity for the agonist. A similar effect was observed blocking A1R with DPCPX or by genetic deletion of either A3R or A1R. Conversely, impairment of A2AR reduced AMPA currents, and decreased agonist sensitivity. Consistently, in hippocampal slices, ARs activation by AR agonist NECA modulated glutamatergic current amplitude evoked by AMPA application or afferent fiber stimulation. Opposite effects of AR subtypes stimulation are likely associated to changes in GluR1 phosphorylation and represent a novel mechanism of physiological modulation of glutamatergic transmission by adenosine, likely acting in normal conditions in the brain, depending on the level of extracellular adenosine and the distribution of AR subtypes. PMID:26528137

  2. Role of the C-terminus of Saccharomyces cerevisiae ubiquitin-conjugating enzyme (Rad6) in substrate and ubiquitin-protein-ligase (E3-R) interactions.

    PubMed

    Raboy, B; Kulka, R G

    1994-04-01

    The product of the RAD6 (UBC2) gene of Saccharomyces cerevisiae is a ubiquitin-conjugating enzyme (Rad6) which is implicated in DNA repair, induced mutagenesis, retrotransposition, sporulation and the degradation of proteins with destabilizing N-terminal amino acid residues. Deletion of the 23-residue acidic C-terminus of Rad6 impairs sporulation and N-end rule protein degradation in vivo but does not affect other functions such as DNA repair and induced mutagenesis. We have investigated the role of the C-terminus of Rad6 in in vitro interactions with various substrates and with a putative ubiquitin-protein ligase, E3-R. The removal of the Rad6 C-terminus had significant different effects on enzyme activity for individual substrates. Although the 23-residue truncated Rad6-149 protein had markedly impaired activity for histone H2B and micrococcal nuclease, the activity for cytochrome c was the same as that of the intact Rad6 protein. Similarly, truncation of Rad6 had no effect on its activity for several poor substrates, namely, beta-casein, beta-lactoglobulin and oxidized RNase. E3-R stimulated the activities of both Rad6 and Rad6-149 for the latter three substrates to similar degrees. E3-R appears to act by enhancing the low intrinsic affinity of Rad6 and Rad6-149 for these substrates. Thus Rad6 can act in three different modes in vitro depending on the substrate, namely unassisted C-terminus-dependent, unassisted C-terminus-independent and E3-R-assisted C-terminus-independent modes. We also examined the results of removing the C-terminal acidic region of Cdc34 (Ubc3), a ubiquitin-conjugating enzyme closely related to Rad6. Truncation of Cdc34 like that of Rad6 had no effect on activity for beta-casein, beta-lactoglobulin or oxidized RNase in the presence or absence of E3-R.

  3. Plasma physics and environmental perturbation laboratory. [magnetospheric experiments from space shuttle

    NASA Technical Reports Server (NTRS)

    Vogl, J. L.

    1973-01-01

    Current work aimed at identifying the active magnetospheric experiments that can be performed from the Space Shuttle, and designing a laboratory to carry out these experiments is described. The laboratory, known as the PPEPL (Plasma Physics and Environmental Perturbation Laboratory) consists of 35-ft pallet of instruments connected to a 25-ft pressurized control module. The systems deployed from the pallet are two 50-m booms, two subsatellites, a high-power transmitter, a multipurpose accelerator, a set of deployable canisters, and a gimbaled instrument platform. Missions are planned to last seven days, during which two scientists will carry out experiments from within the pressurized module. The type of experiments to be performed are outlined.

  4. Marine geodesy a multipurpose approach to solve oceanic problems. [including submersible navigation under iced seas, demarcation and determination of boundaries in deep ocean, tsunamis, and ecology

    NASA Technical Reports Server (NTRS)

    Saxena, N.

    1974-01-01

    Various current and future problem areas of marine geodesy are identified. These oceanic problem areas are highly diversified and include submersible navigation under ice seas, demarcation and determination of boundaries in deep ocean, tsunamis, ecology, etc., etc. Their achieved as well as desired positional accuracy estimates, based upon publications and discussions, are also given. A multipurpose approach to solve these problems is described. An optimum configuration of an ocean-bottom control-net unit is provided.

  5. Multi-destination and multi-purpose trip effects in the analysis of the demand for trips to a remote recreational site.

    PubMed

    Martínez-Espiñeira, Roberto; Amoako-Tuffour, Joe

    2009-06-01

    One of the basic assumptions of the travel cost method for recreational demand analysis is that the travel cost is always incurred for a single purpose recreational trip. Several studies have skirted around the issue with simplifying assumptions and dropping observations considered as nonconventional holiday-makers or as nontraditional visitors from the sample. The effect of such simplifications on the benefit estimates remains conjectural. Given the remoteness of notable recreational parks, multi-destination or multi-purpose trips are not uncommon. This article examines the consequences of allocating travel costs to a recreational site when some trips were taken for purposes other than recreation and/or included visits to other recreational sites. Using a multi-purpose weighting approach on data from Gros Morne National Park, Canada, we conclude that a proper correction for multi-destination or multi-purpose trip is more of what is needed to avoid potential biases in the estimated effects of the price (travel-cost) variable and of the income variable in the trip generation equation.

  6. A multicenter investigation of OPTI-FREE® RepleniSH® multi-purpose disinfecting solution impact on soft contact lens patient comfort

    PubMed Central

    Corbin, Glenn S; Bennett, Linda; Espejo, Louis; Carducci, Suzanne; Sacco, Andrew; Hannigan, Robert; Schatz, Stuart

    2010-01-01

    Objective: Demonstrate that successful soft contact lens wearers using competitive multipurpose solutions report improvement in comfort with OPTI-FREE® RepleniSH® Multi-Purpose Disinfecting Solution (MPDS). Methods: This 30-day, multicentered, open-label study enrolled 109 eligible soft contact lens wearers using COMPLETE® Multi-Purpose Solution (MPS) Easy Rub® or ReNu MultiPlus® MPS. The test solution (OPTI-FREE® RepleniSH® MPDS) was dispensed for use in place of habitual care solutions. Subjects assessed their experience with their habitual solution (baseline) and the test solution (Day 30) using Likert-style questions. Contact lens acuity and biomicroscopy findings were recorded at each visit. Results: The test solution was associated with a statistically significant improvement in instillation comfort (P = 0.02), end of day comfort (P < 0.0001), clear vision (P < 0.0001) and overall satisfaction (P < 0.001). Subjects reported the test solution enhanced their overall lens-wearing experience more effectively than their previous solution (P < 0.0001) and that they would continue test solution use after the study (P < 0.0001). Conclusions: The test solution was effective at improving comfort and overall contact lens experience compared to COMPLETE® MPS Easy Rub® or ReNu MultiPlus® MPS in successful contact lens wearers. These results indicate that changing contact lens care solutions, even in successful lens wearers, may improve comfort and overall lens-wearing experience. PMID:20169049

  7. Multipurpose effectiveness of Couroupita guianensis-synthesized gold nanoparticles: high antiplasmodial potential, field efficacy against malaria vectors and synergy with Aplocheilus lineatus predators.

    PubMed

    Subramaniam, Jayapal; Murugan, Kadarkarai; Panneerselvam, Chellasamy; Kovendan, Kalimuthu; Madhiyazhagan, Pari; Dinesh, Devakumar; Kumar, Palanisamy Mahesh; Chandramohan, Balamurugan; Suresh, Udaiyan; Rajaganesh, Rajapandian; Alsalhi, Mohamad Saleh; Devanesan, Sandhanasamy; Nicoletti, Marcello; Canale, Angelo; Benelli, Giovanni

    2016-04-01

    Mosquito-borne diseases represent a deadly threat for millions of people worldwide. According to recent estimates, about 3.2 billion people, almost half of the world's population, are at risk of malaria. Malaria control is particularly challenging due to a growing number of chloroquine-resistant Plasmodium and pesticide-resistant Anopheles vectors. Newer and safer control tools are required. In this research, gold nanoparticles (AuNPs) were biosynthesized using a cheap flower extract of Couroupita guianensis as reducing and stabilizing agent. The biofabrication of AuNP was confirmed by UV-vis spectrophotometry, Fourier transform infrared (FTIR) spectroscopy, transmission electron microscopy (TEM), energy-dispersive X-ray (EDX) spectroscopy, X-ray diffraction (XRD), zeta potential, and particle size analysis. AuNP showed different shapes including spheres, ovals, and triangles. AuNPs were crystalline in nature with face-centered cubic geometry; mean size was 29.2-43.8 nm. In laboratory conditions, AuNPs were toxic against Anopheles stephensi larvae, pupae, and adults. LC50 was 17.36 ppm (larva I), 19.79 ppm (larva II), 21.69 ppm (larva III), 24.57 ppm (larva IV), 28.78 ppm (pupa), and 11.23 ppm (adult). In the field, a single treatment with C. guianensis flower extract and AuNP (10 × LC50) led to complete larval mortality after 72 h. In standard laboratory conditions, the predation efficiency of golden wonder killifish, Aplocheilus lineatus, against A. stephensi IV instar larvae was 56.38 %, while in an aquatic environment treated with sub-lethal doses of the flower extract or AuNP, predation efficiency was boosted to 83.98 and 98.04 %, respectively. Lastly, the antiplasmodial activity of C. guianensis flower extract and AuNP was evaluated against CQ-resistant (CQ-r) and CQ-sensitive (CQ-s) strains of Plasmodium falciparum. IC50 of C. guianensis flower extract was 43.21 μg/ml (CQ-s) and 51.16 μg/ml (CQ-r). AuNP IC50 was 69.47 μg/ml (CQ-s) and 76

  8. Multipurpose effectiveness of Couroupita guianensis-synthesized gold nanoparticles: high antiplasmodial potential, field efficacy against malaria vectors and synergy with Aplocheilus lineatus predators.

    PubMed

    Subramaniam, Jayapal; Murugan, Kadarkarai; Panneerselvam, Chellasamy; Kovendan, Kalimuthu; Madhiyazhagan, Pari; Dinesh, Devakumar; Kumar, Palanisamy Mahesh; Chandramohan, Balamurugan; Suresh, Udaiyan; Rajaganesh, Rajapandian; Alsalhi, Mohamad Saleh; Devanesan, Sandhanasamy; Nicoletti, Marcello; Canale, Angelo; Benelli, Giovanni

    2016-04-01

    Mosquito-borne diseases represent a deadly threat for millions of people worldwide. According to recent estimates, about 3.2 billion people, almost half of the world's population, are at risk of malaria. Malaria control is particularly challenging due to a growing number of chloroquine-resistant Plasmodium and pesticide-resistant Anopheles vectors. Newer and safer control tools are required. In this research, gold nanoparticles (AuNPs) were biosynthesized using a cheap flower extract of Couroupita guianensis as reducing and stabilizing agent. The biofabrication of AuNP was confirmed by UV-vis spectrophotometry, Fourier transform infrared (FTIR) spectroscopy, transmission electron microscopy (TEM), energy-dispersive X-ray (EDX) spectroscopy, X-ray diffraction (XRD), zeta potential, and particle size analysis. AuNP showed different shapes including spheres, ovals, and triangles. AuNPs were crystalline in nature with face-centered cubic geometry; mean size was 29.2-43.8 nm. In laboratory conditions, AuNPs were toxic against Anopheles stephensi larvae, pupae, and adults. LC50 was 17.36 ppm (larva I), 19.79 ppm (larva II), 21.69 ppm (larva III), 24.57 ppm (larva IV), 28.78 ppm (pupa), and 11.23 ppm (adult). In the field, a single treatment with C. guianensis flower extract and AuNP (10 × LC50) led to complete larval mortality after 72 h. In standard laboratory conditions, the predation efficiency of golden wonder killifish, Aplocheilus lineatus, against A. stephensi IV instar larvae was 56.38 %, while in an aquatic environment treated with sub-lethal doses of the flower extract or AuNP, predation efficiency was boosted to 83.98 and 98.04 %, respectively. Lastly, the antiplasmodial activity of C. guianensis flower extract and AuNP was evaluated against CQ-resistant (CQ-r) and CQ-sensitive (CQ-s) strains of Plasmodium falciparum. IC50 of C. guianensis flower extract was 43.21 μg/ml (CQ-s) and 51.16 μg/ml (CQ-r). AuNP IC50 was 69.47 μg/ml (CQ-s) and 76

  9. Multipurpose applications of the accelerator-based neutron source[1pt] GENEPI2

    NASA Astrophysics Data System (ADS)

    Villa, F.; Baylac, M.; Billebaud, A.; Boge, P.; Cabanel, T.; Labussière, E.; Méplan, O.; Rey, S.

    2016-11-01

    GENEPI2 (GEnérateur de NEutrons Pulsé Intense) is an accelerator-based neutron source operating at LPSC laboratory in Grenoble (France). The neutrons are produced at 2.5MeV or 14.2MeV trough fusion reactions. GENEPI2 specifications allow performing efficiently accelerated irradiation tests of integrated circuits. This facility can also be operated to test and calibrate different types of detectors. This paper will describe the facility and its performances. Then, measurements of the neutron production will be presented as well as different types of experiments and irradiations. Finally, we describe upgrades undertaken to increase the neutron flux and optimize the facility for multiple applications.

  10. Controlling stereoselectivity by enzymatic and chemical means to access enantiomerically pure (1S,3R)-1-benzyl-2,3-dimethyl-1,2,3,4-tetrahydroisoquinoline derivatives☆

    PubMed Central

    Orden, Alejandro A.; Schrittwieser, Joerg H.; Resch, Verena; Mutti, Francesco G.; Kroutil, Wolfgang

    2013-01-01

    A chemoenzymatic strategy for the synthesis of enantiomerically pure novel alkaloids (1S,3R)-1-benzyl-2,3-dimethyl-1,2,3,4-tetrahydroisoquinolines is presented. The key steps are the biocatalytic stereoselective reductive amination of substituted 1-phenylpropan-2-one derivatives to yield chiral amines employing microbial ω-transaminases, and the diastereoselective reduction of a Bischler–Napieralski imine intermediate by catalytic hydrogenation in the presence of palladium on charcoal, leading exclusively to the desired cis-isomer. PMID:24503964

  11. Design and investigations of the superconducting magnet system for the multipurpose superconducting electron cyclotron resonance ion source

    SciTech Connect

    Tinschert, K.; Lang, R.; Maeder, J.; Rossbach, J.; Spaedtke, P.; Komorowski, P.; Meyer-Reumers, M.; Krischel, D.; Fischer, B.; Ciavola, G.; Gammino, S.; Celona, L.

    2012-02-15

    The production of intense beams of heavy ions with electron cyclotron resonance ion sources (ECRIS) is an important request at many accelerators. According to the ECR condition and considering semi-empirical scaling laws, it is essential to increase the microwave frequency together with the magnetic flux density of the ECRIS magnet system. A useful frequency of 28 GHz, therefore, requires magnetic flux densities above 2.2 T implying the use of superconducting magnets. A cooperation of European institutions initiated a project to build a multipurpose superconducting ECRIS (MS-ECRIS) in order to achieve an increase of the performances in the order of a factor of ten. After a first design of the superconducting magnet system for the MS-ECRIS, the respective cold testing of the built magnet system reveals a lack of mechanical performance due to the strong interaction of the magnetic field of the three solenoids with the sextupole field and the magnetization of the magnetic iron collar. Comprehensive structural analysis, magnetic field calculations, and calculations of the force pattern confirm thereafter these strong interactions, especially of the iron collar with the solenoidal fields. The investigations on the structural analysis as well as suggestions for a possible mechanical design solution are given.

  12. Development of a multi-layered vaginal tablet containing dapivirine, levonorgestrel and acyclovir for use as a multipurpose prevention technology.

    PubMed

    McConville, Christopher; Major, Ian; Devlin, Brid; Brimer, Andrew

    2016-07-01

    Multipurpose prevention technologies (MPTs) are preferably single dosage forms designed to simultaneously address multiple sexual and reproductive health needs, such as unintended pregnancy, HIV infection and other sexually transmitted infections (STIs). This manuscript describes the development of a range of multi-layered vaginal tablets, with both immediate and sustained release layers capable of delivering the antiretroviral drug dapivirine, the contraceptive hormone levonorgestrel, and the anti-herpes simplex virus drug acyclovir at independent release rates from a single dosage form. Depending on the design of the tablet in relation to the type (immediate or sustained release) or number of layers, the dose of each drug could be individually controlled. For example one tablet design was able to provide immediate release of all three drugs, while another tablet design was able to provide immediate release of both acyclovir and levonorgestrel, while providing sustained release of Dapivirine for up to 8h. A third tablet design was able to provide immediate release of both acyclovir and levonorgestrel, a large initial burst of Dapivirine, followed by sustained release of Dapivirine for up to 8h. All of the tablets passed the test for friability with a percent friability of less than 1%. The hardness of all tablet designs was between 115 and 153N, while their drug content met the European Pharmacopeia 2.9.40 Uniformity of Dosage units acceptance value at levels 1 and 2. Finally, the accelerated stability of all three actives was significantly enhanced in comparison with a mixed drug control. PMID:27163243

  13. In situ multipurpose time-resolved spectrometer for monitoring nanoparticle generation in a high-pressure fluid

    SciTech Connect

    Wei, Shaoyu; Saitow, Ken-ichi

    2012-07-15

    We developed a multipurpose time-resolved spectrometer for studying the dynamics of nanoparticles generated by pulsed-laser ablation (PLA) in a high-pressure fluid. The apparatus consists of a high-pressure optical cell and three spectrometers for in situ measurements. The optical cell was designed for experiments at temperatures up to 400 K and pressures up to 30 MPa with fluctuations within {+-}0.1% h{sup -1}. The three spectrometers were used for the following in situ measurements at high pressures: (i) transient absorption spectrum measurements from 350 to 850 nm to investigate the dynamics of nanoparticle generation from nanoseconds to milliseconds after laser irradiation, (ii) absorption spectrum measurements from 220 to 900 nm to observe the time evolution of nanoparticles from seconds to hours after laser ablation, and (iii) dynamic light scattering measurements to track nanoparticles with sizes from 10 nm to 10 {mu}m in the time range from seconds to hours after laser ablation. By combining these three spectrometers, we demonstrate in situ measurements of gold nanoparticles generated by PLA in supercritical fluids. This is the first report of in situ time-resolved measurements of the dynamics of nanoparticles generated in a supercritical fluid.

  14. Iodine Tagging Velocimetry and Mechanism in the Hypersonic Near Wake of a MultiPurpose Crew Vehicle

    NASA Technical Reports Server (NTRS)

    Balla, R. Jeffrey

    2013-01-01

    This study demonstrates a new molecular tagging velocimetry (MTV) method for velocity measurements of high speed flow. It demonstrates offbody Iodine Tagging Velocimetry (ITV) in the hypersonic near wake of a MultiPurpose Crew Vehicle (MPCV) model. Experiments are performed in the NASA-Langley 31-inch Mach 10 air wind tunnel. A 0.5% I2 / N2 mixture is seeded on the leeward backshell of the model using a pressure tap. I2 laser-induced fluorescence is excited along a 5.5 mm line using an ArF excimer laser near 193 nm. Results indicate I2 absorbs at least 2 photons to produce iodine ions and electrons. These recombine as the tagged region is displaced downstream to produce I (2P3/2) whose emission is monitored at 206 nm. Results at P0 = 2.41 MPa (350 psi), T0 = 990K, and 10 micro-sec transit times produce velocities from 630-820 m/sec across the I2 seeded jet at a distance of 38.2 mm (25.5 jet diameters) downstream from the jet orifice. Maximum wake jet velocities near the shear layer are 59% of freestream velocity.

  15. Optimization of Multiple and Multipurpose Reservoir System Operations by Using Matrix Structure (Case Study: Karun and Dez Reservoir Dams)

    PubMed Central

    Othman, Faridah; Taghieh, Mahmood

    2016-01-01

    Optimal operation of water resources in multiple and multipurpose reservoirs is very complicated. This is because of the number of dams, each dam’s location (Series and parallel), conflict in objectives and the stochastic nature of the inflow of water in the system. In this paper, performance optimization of the system of Karun and Dez reservoir dams have been studied and investigated with the purposes of hydroelectric energy generation and providing water demand in 6 dams. On the Karun River, 5 dams have been built in the series arrangements, and the Dez dam has been built parallel to those 5 dams. One of the main achievements in this research is the implementation of the structure of production of hydroelectric energy as a function of matrix in MATLAB software. The results show that the role of objective function structure for generating hydroelectric energy in weighting method algorithm is more important than water supply. Nonetheless by implementing ε- constraint method algorithm, we can both increase hydroelectric power generation and supply around 85% of agricultural and industrial demands. PMID:27248152

  16. Optimization of Multiple and Multipurpose Reservoir System Operations by Using Matrix Structure (Case Study: Karun and Dez Reservoir Dams).

    PubMed

    Heydari, Mohammad; Othman, Faridah; Taghieh, Mahmood

    2016-01-01

    Optimal operation of water resources in multiple and multipurpose reservoirs is very complicated. This is because of the number of dams, each dam's location (Series and parallel), conflict in objectives and the stochastic nature of the inflow of water in the system. In this paper, performance optimization of the system of Karun and Dez reservoir dams have been studied and investigated with the purposes of hydroelectric energy generation and providing water demand in 6 dams. On the Karun River, 5 dams have been built in the series arrangements, and the Dez dam has been built parallel to those 5 dams. One of the main achievements in this research is the implementation of the structure of production of hydroelectric energy as a function of matrix in MATLAB software. The results show that the role of objective function structure for generating hydroelectric energy in weighting method algorithm is more important than water supply. Nonetheless by implementing ε- constraint method algorithm, we can both increase hydroelectric power generation and supply around 85% of agricultural and industrial demands.

  17. An enzyme-free strategy for ultrasensitive detection of adenosine using a multipurpose aptamer probe and malachite green.

    PubMed

    Zhao, Hui; Wang, Yong-Sheng; Tang, Xian; Zhou, Bin; Xue, Jin-Hua; Liu, Hui; Liu, Shan-Du; Cao, Jin-Xiu; Li, Ming-Hui; Chen, Si-Han

    2015-08-01

    We report on an enzyme-free and label-free strategy for the ultrasensitive determination of adenosine. A novel multipurpose adenosine aptamer (MAAP) is designed, which serves as an effective target recognition probe and a capture probe for malachite green. In the presence of adenosine, the conformation of the MAAP is converted from a hairpin structure to a G-quadruplex. Upon addition of malachite green into this solution, a noticeable enhancement of resonance light scattering was observed. The signal response is directly proportional to the concentration of adenosine ranging from 75 pM to 2.2 nM with a detection limit of 23 pM, which was 100-10,000 folds lower than those obtained by previous reported methods. Moreover, this strategy has been applied successfully for detecting adenosine in human urine and blood samples, further proving its reliability. The mechanism of adenosine inducing MAAP to form a G-quadruplex was demonstrated by a series of control experiments. Such a MAAP probe can also be used to other strategies such as fluorescence or spectrophotometric ones. We suppose that this strategy can be expanded to develop a universal analytical platform for various target molecules in the biomedical field and clinical diagnosis. PMID:26320800

  18. The role of multi-purpose solutions in prevention and removal of lipid depositions on contact lenses.

    PubMed

    Tam, Ngai Keung; Pitt, William G; Perez, Krystian X; Handly, Erika; Glenn, Andrew A; Hickey, John W; Larsen, Brian G

    2014-12-01

    The sorption and desorption of radiolabeled dipalmitoylphosphatidylcholine (DPPC) and cholesterol (CH) were measured on 5 types of commercial contact lenses. The lenses were soaked in vitro in an artificial tear fluid for 16h. The effects of borate buffered saline and two commercial multi-purpose lens-care solutions (MPSs) on reducing the lipid (DPPC and CH) sorption and increasing the lipid removal were examined. The results showed that silicone hydrogel (SiHy) lenses accumulated the most lipids, sorbing over an order of magnitude more than polymacon, a conventional hydrogel lens. Pre-soaking the SiHy lenses for 16h in MPSs reduced the DPPC sorption by up to 13% and the CH sorption by up to 11%, compared to controls that were not pre-soaked. However neither these reductions nor those on polymacon were statistically significant (p>0.05). In sorption experiments without presoaking, subsequent exposure to the MPSs removed some DPPC from the lenses (0-3.1% for SiHy lenses and 14-55% for polymacon), but CH removal was 0.0-0.8% for SiHy lenses and 0.6-28% for polymacon lenses. Some of these removals were statistically significant (p<0.05).

  19. New multi-purpose high copy number vector with greater mitotic stability for diverse applications in fission yeast Schizosaccharomyces pombe.

    PubMed

    Verma, Hemant Kumar; Singh, Jagmohan

    2012-11-01

    We have constructed a pUC19-based multipurpose ATG vector in Schizosaccharomyces pombe with higher copy number and mitotic stability possible with commonly used vectors. The vector, having an NdeI site in its polylinker to provide ATG site for expression, carries a greatly truncated version of URA3 gene, URA3m, of Saccharomyces cerevisiae as a selection marker. In addition, it contains the mat2P-right flank region (mat2P-RF) of S. pombe as an autonomous replicating sequence (ARS) and a polylinker with wider choice of restriction sites. While URA3m confers an increase in plasmid copy number up to 200 copies/cell, mat2P-RF imparts greater mitotic stability than the standard ars1 element of S. pombe. Finally, the vector also includes the transcription termination signal of the nmt1 gene (Tnmt1). This basic vector should serve as a versatile tool for studies of gene function in S. pombe.

  20. Validation of self-reported motor-vehicle crash and related work leave in a multi-purpose prospective cohort.

    PubMed

    Pons-Villanueva, Juan; Seguí-Gómez, María

    2010-12-01

    Validation studies about self-reported motor vehicle crashes and related work leave are scarce. The Seguimiento Universidad de Navarra (SUN) is a multi-purpose cohort study undertaken in Spain. Motor vehicle crash risk factors are assessed within it. The objective of this study was to validate the incidents of self-reported motor vehicle crashes (MVC) and related work leave through mailing and clinical notes' review. The method included questions in the cohort's questionnaire regarding motor vehicle crash incident and work leave. We made both a re-test and a criterion validity study for self-reported answers. The results show a moderate κ Cohen's correlation coefficient for both events. Re-test reliability κ for MVC was 0.55, for MVC-related work leave it was 0.53. Criterion validity κ was 0.25 for MVC and 0.25 for MVC-related work leave. These results show a moderate agreement for re-test both for MVC and work MVC-related leave. For criterion validity, the results show a fair agreement. The magnitude of the agreement is similar to other similar studies and allows the use of these data in epidemiological studies.

  1. The safety attitudes of people who use multi-purpose recreation facilities as a physical activity setting.

    PubMed

    Finch, Caroline F; Otago, Leonie; White, Peta; Donaldson, Alex; Mahoney, Mary

    2011-06-01

    Multi-purpose recreation facilities (MPRFs) are a popular setting for physical activity and it is therefore important that they are safe for all patrons. However, the attitudes of MPRF users towards safety are a potential barrier to the success of injury prevention programmes implemented within MPRFs. This article reports a survey of the safety attitudes of over 700 users of four indoor MPRFs. Factor analysis of 12 five-point Likert scale statements showed that the attitudes clustered around three major dimensions - the importance of safety, the benefits of safety and the perceptions of injury risk. Together, these three dimensions accounted for 49% of the variability in the attitudes. More than 85% of respondents agreed/strongly agreed that: safety was an important aspect of physical activity participation; being injured affected enjoyment of physical activity; people should adopt appropriate safety measures for all physical activity; and individuals were responsible for their own safety. The MPRF users, particularly women and older people, were generally safety conscious, believed in adopting safety measures, and were willing to take responsibility for their own safety. Facility managers can be confident that if they provide evidence-based injury prevention interventions in these settings, then users will respond appropriately and adopt the promoted behaviours.

  2. The prospective usage of the multi-purpose canister and impacts on the waste management and disposal system

    SciTech Connect

    McLeod, N.B.

    1993-12-31

    The Multi-Purpose Canister (MPC) is designed to be loaded with spent fuel and sealed at reactors and then serve the functions of transport, storage and disposal without reopening. It can be either self-shielded or unshielded, thus requiring compatible overpacks for transport, storage and disposal. The MPC is not a new concept but it may now be viable because of the particular characteristics at Yucca Mountain: larger MPCs are possible because of ramp access to the repository horizon, and the less difficult temperature limits because of in-drift emplacement, rather than borehole emplacement. This paper describes the advantages and disadvantages of adopting the MPC as the principal technology to be employed in the US program. Use of the MPC permits integration of the utility and DOE portions of the system as well as among the elements within the DOE portion. Paradoxically, the principal disadvantage of the MPC is a direct consequence of its merit as an integrating technology. Full integration includes disposability without reopening, and requires that disposability design decisions be made and implemented well in advance of when waste package licensing uncertainties are resolved. There is, therefore, a risk that MPCs loaded prior to waste package licensing will have to be opened. This risk is discussed in terms of probability and consequences and various alternatives for mitigating this risk are discussed.

  3. An enzyme-free strategy for ultrasensitive detection of adenosine using a multipurpose aptamer probe and malachite green.

    PubMed

    Zhao, Hui; Wang, Yong-Sheng; Tang, Xian; Zhou, Bin; Xue, Jin-Hua; Liu, Hui; Liu, Shan-Du; Cao, Jin-Xiu; Li, Ming-Hui; Chen, Si-Han

    2015-08-01

    We report on an enzyme-free and label-free strategy for the ultrasensitive determination of adenosine. A novel multipurpose adenosine aptamer (MAAP) is designed, which serves as an effective target recognition probe and a capture probe for malachite green. In the presence of adenosine, the conformation of the MAAP is converted from a hairpin structure to a G-quadruplex. Upon addition of malachite green into this solution, a noticeable enhancement of resonance light scattering was observed. The signal response is directly proportional to the concentration of adenosine ranging from 75 pM to 2.2 nM with a detection limit of 23 pM, which was 100-10,000 folds lower than those obtained by previous reported methods. Moreover, this strategy has been applied successfully for detecting adenosine in human urine and blood samples, further proving its reliability. The mechanism of adenosine inducing MAAP to form a G-quadruplex was demonstrated by a series of control experiments. Such a MAAP probe can also be used to other strategies such as fluorescence or spectrophotometric ones. We suppose that this strategy can be expanded to develop a universal analytical platform for various target molecules in the biomedical field and clinical diagnosis.

  4. Theme: Laboratory Facilities Improvement.

    ERIC Educational Resources Information Center

    Miller, Glen M.; And Others

    1993-01-01

    Includes "Laboratory Facilities Improvement" (Miller); "Remodeling Laboratories for Agriscience Instruction" (Newman, Johnson); "Planning for Change" (Mulcahy); "Laboratory Facilities Improvement for Technology Transfer" (Harper); "Facilities for Agriscience Instruction" (Agnew et al.); "Laboratory Facility Improvement" (Boren, Dwyer); and…

  5. The Gene Encoding the Low-Affinity Penicillin-Binding Protein 3r in Enterococcus hirae S185R Is Borne on a Plasmid Carrying Other Antibiotic Resistance Determinants

    PubMed Central

    Raze, Dominique; Dardenne, Olivier; Hallut, Séverine; Martinez-Bueno, Manuel; Coyette, Jacques; Ghuysen, Jean-Marie

    1998-01-01

    Two plasmid-derived NcoI DNA fragments of 14 and 4.5 kb, respectively, have been isolated from the multidrug-resistant strain Enterococcus hirae S185R and analyzed. The 14-kb fragment contains two inverted (L and R) IS1216 insertion modules of the ISS1 family. These modules define a Tn5466 transposon-like structure that contains one copy of the methylase-encoding ermAM conferring erythromycin resistance and one copy of the adenylyl-transferase-encoding aadE conferring streptomycin resistance. Immediately on the left side of IS1216L there occurs a copy of pbp3r encoding the low-affinity penicillin-binding protein (PBP) PBP3r, itself preceded by a psr-like gene (psr3r) that controls the synthesis of PBP3r. ermAM, aadE, and the transposase gene (tnp) of IS1216R have the same polarities, and these are opposite those of psr3r, pbp3r, and the tnp gene of IS1216L. The 4.5-kb fragment is a copy of the 4.5-kb sequence at the 5′ end of the 14-kb fragment, although it is not a restriction product of the 14-kb fragment. It contains three genes with the same polarity: psr3r, pbp3r, and tnp in an IS1216 element. Because of the very high degree of identity (99%) with the chromosomal psrfm and pbp5fm genes of Enterococcus faecium D63R, it is proposed that both the psr3r and pbp3r genes were transferred from an E. faecium strain and inserted in a plasmid of E. hirae. E. hirae is the first known bacterial species in which a low-affinity PBP-encoding gene has been found to be plasmid borne. PMID:9517928

  6. Enhanced growth of multipurpose Calliandra (Calliandra calothyrsus) using arbuscular mycorrhiza fungi in Uganda.

    PubMed

    Sebuliba, Esther; Nyeko, Phillip; Majaliwa, Mwanjalolo; Eilu, Gerald; Kizza, Charles Luswata; Ekwamu, Adipala

    2012-01-01

    This study was conducted to compare the effect of selected arbuscular mycorrhiza fungi genera and their application rates for enhanced Calliandra growth in Uganda. The performance of Calliandra under different types and rates of arbuscular mycorrhiza fungi inoculation was assessed in the greenhouse using sterilized Mabira soils. Four dominant genera were isolated from the rhizosphere of sorghum in the laboratory. Calliandra seeds were grown in pots and the seed coating method of application was used at concentrations of 0 spores, 30 spores and 50 spores. Each treatment was replicated three times. All Calliandra inoculated seedlings showed improved seedling growth (in terms of height and shoot dry matter weight) compared to the control (P < 0.05) except with the arbuscular mycorrhiza fungi mixture treated Calliandra at 50 spores rate. Glomus sp. and Acaulospora sp. had significant influence on the height of Calliandra, while AMF mixture performed best in terms of shoot dry weight (P < 0.05). This study provides a good scope for commercially utilizing the efficient strains of arbuscular mycorrhiza fungi for beneficial effects in the primary establishment of slow growing seedlings ensuring better survival and improved growth.

  7. Enhanced growth of multipurpose Calliandra (Calliandra calothyrsus) using arbuscular mycorrhiza fungi in Uganda.

    PubMed

    Sebuliba, Esther; Nyeko, Phillip; Majaliwa, Mwanjalolo; Eilu, Gerald; Kizza, Charles Luswata; Ekwamu, Adipala

    2012-01-01

    This study was conducted to compare the effect of selected arbuscular mycorrhiza fungi genera and their application rates for enhanced Calliandra growth in Uganda. The performance of Calliandra under different types and rates of arbuscular mycorrhiza fungi inoculation was assessed in the greenhouse using sterilized Mabira soils. Four dominant genera were isolated from the rhizosphere of sorghum in the laboratory. Calliandra seeds were grown in pots and the seed coating method of application was used at concentrations of 0 spores, 30 spores and 50 spores. Each treatment was replicated three times. All Calliandra inoculated seedlings showed improved seedling growth (in terms of height and shoot dry matter weight) compared to the control (P < 0.05) except with the arbuscular mycorrhiza fungi mixture treated Calliandra at 50 spores rate. Glomus sp. and Acaulospora sp. had significant influence on the height of Calliandra, while AMF mixture performed best in terms of shoot dry weight (P < 0.05). This study provides a good scope for commercially utilizing the efficient strains of arbuscular mycorrhiza fungi for beneficial effects in the primary establishment of slow growing seedlings ensuring better survival and improved growth. PMID:23365530

  8. Feasibility of Frequency-Modulated Wireless Transmission for a Multi-Purpose MEMS-Based Accelerometer

    PubMed Central

    Sabato, Alessandro; Feng, Maria Q.

    2014-01-01

    Recent advances in the Micro Electro-Mechanical System (MEMS) technology have made wireless MEMS accelerometers an attractive tool for Structural Health Monitoring (SHM) of civil engineering structures. To date, sensors' low sensitivity and accuracy—especially at very low frequencies—have imposed serious limitations for their application in monitoring large-sized structures. Conventionally, the MEMS sensor's analog signals are converted to digital signals before radio-frequency (RF) wireless transmission. The conversion can cause a low sensitivity to the important low-frequency and low-amplitude signals. To overcome this difficulty, the authors have developed a MEMS accelerometer system, which converts the sensor output voltage to a frequency-modulated signal before RF transmission. This is achieved by using a Voltage to Frequency Conversion (V/F) instead of the conventional Analog to Digital Conversion (ADC). In this paper, a prototype MEMS accelerometer system is presented, which consists of a transmitter and receiver circuit boards. The former is equipped with a MEMS accelerometer, a V/F converter and a wireless RF transmitter, while the latter contains an RF receiver and a F/V converter for demodulating the signal. The efficacy of the MEMS accelerometer system in measuring low-frequency and low-amplitude dynamic responses is demonstrated through extensive laboratory tests and experiments on a flow-loop pipeline. PMID:25198003

  9. Enhanced Growth of Multipurpose Calliandra (Calliandra calothyrsus) Using Arbuscular Mycorrhiza Fungi in Uganda

    PubMed Central

    Sebuliba, Esther; Nyeko, Phillip; Majaliwa, Mwanjalolo; Eilu, Gerald; Kizza, Charles Luswata; Ekwamu, Adipala

    2012-01-01

    This study was conducted to compare the effect of selected arbuscular mycorrhiza fungi genera and their application rates for enhanced Calliandra growth in Uganda. The performance of Calliandra under different types and rates of arbuscular mycorrhiza fungi inoculation was assessed in the greenhouse using sterilized Mabira soils. Four dominant genera were isolated from the rhizosphere of sorghum in the laboratory. Calliandra seeds were grown in pots and the seed coating method of application was used at concentrations of 0 spores, 30 spores and 50 spores. Each treatment was replicated three times. All Calliandra inoculated seedlings showed improved seedling growth (in terms of height and shoot dry matter weight) compared to the control (P < 0.05) except with the arbuscular mycorrhiza fungi mixture treated Calliandra at 50 spores rate. Glomus sp. and Acaulospora sp. had significant influence on the height of Calliandra, while AMF mixture performed best in terms of shoot dry weight (P < 0.05). This study provides a good scope for commercially utilizing the efficient strains of arbuscular mycorrhiza fungi for beneficial effects in the primary establishment of slow growing seedlings ensuring better survival and improved growth. PMID:23365530

  10. Feasibility of frequency-modulated wireless transmission for a multi-purpose MEMS-based accelerometer.

    PubMed

    Sabato, Alessandro; Feng, Maria Q

    2014-09-05

    Recent advances in the Micro Electro-Mechanical System (MEMS) technology have made wireless MEMS accelerometers an attractive tool for Structural Health Monitoring (SHM) of civil engineering structures. To date, sensors' low sensitivity and accuracy--especially at very low frequencies--have imposed serious limitations for their application in monitoring large-sized structures. Conventionally, the MEMS sensor's analog signals are converted to digital signals before radio-frequency (RF) wireless transmission. The conversion can cause a low sensitivity to the important low-frequency and low-amplitude signals. To overcome this difficulty, the authors have developed a MEMS accelerometer system, which converts the sensor output voltage to a frequency-modulated signal before RF transmission. This is achieved by using a Voltage to Frequency Conversion (V/F) instead of the conventional Analog to Digital Conversion (ADC). In this paper, a prototype MEMS accelerometer system is presented, which consists of a transmitter and receiver circuit boards. The former is equipped with a MEMS accelerometer, a V/F converter and a wireless RF transmitter, while the latter contains an RF receiver and a F/V converter for demodulating the signal. The efficacy of the MEMS accelerometer system in measuring low-frequency and low-amplitude dynamic responses is demonstrated through extensive laboratory tests and experiments on a flow-loop pipeline.

  11. Molecular cloning of isoflavone reductase from pea (Pisum sativum L.): evidence for a 3R-isoflavanone intermediate in (+)-pisatin biosynthesis.

    PubMed

    Paiva, N L; Sun, Y; Dixon, R A; VanEtten, H D; Hrazdina, G

    1994-08-01

    Isoflavone reductase (IFR) reduces achiral isoflavones to chiral isoflavanones during the biosynthesis of chiral pterocarpan phytoalexins. A cDNA clone for IFR from pea (Pisum sativum) was isolated using the polymerase chain reaction and expressed in Escherichia coli. Analysis of circular dichroism (CD) spectra of the reduction product sophorol obtained using the recombinant enzyme indicated that the isoflavanone possessed the 3R stereochemistry, in contrast to previous reports indicating a 3S-isoflavanone as the product of the pea IFR. Analysis of CD spectra of sophorol produced using enzyme extracts of CuCl2-treated pea seedlings confirmed the 3R stereochemistry. Thus, the stereochemistry of the isoflavanone intermediate in (+)-pisatin biosynthesis in pea is the same as that in (-)-medicarpin biosynthesis in alfalfa, although the final pterocarpans have the opposite stereochemistry. At the amino acid level the pea IFR cDNA was 91.8 and 85.2% identical to the IFRs from alfalfa and chickpea, respectively. IFR appears to be encoded by a single gene in pea. Its transcripts are highly induced in CuCl2-treated seedlings, consistent with the appearance of IFR enzyme activity and pisatin accumulation.

  12. (1S,3R,4S,5R)5-O-Caffeoylquinic acid: isolation, stereo-structure characterization and biological activity.

    PubMed

    Forino, Martino; Tenore, Gian Carlo; Tartaglione, Luciana; Carmela, Dell'Aversano; Novellino, Ettore; Ciminiello, Patrizia

    2015-07-01

    Sorbus domestica fruits (sorbs) are commonly harvested and consumed for their nutritious qualities and have long been used as natural remedy against diabetes in the popular medicine. Recently, sorbs have been described as sources of antioxidant compounds including polyphenols. Chemical analyses carried out on sorbs collected in Southern Italy have led to the isolation of a chlorogenic acid isomer as the main antioxidant compound contained in the fruit butanol extract. NMR studies have identified the isolated compound as (1S,3R,4S,5R)5-O-Caffeoylquinic acid. In comparison to chlorogenic acid, the isolated isomer features an inverted configuration at C4. Such configurational inversion causes the chlorogenic acid stereoisomer acid to assume a preferential conformation remarkably different from that of chlorogenic acid. This seems to account for the enhanced potency of (1S,3R,4S,5R)5-O-Caffeoylquinic acid to reduce both the glucose and cholesterol uptakes by the cell line HepG2 when compared to chlorogenic acid.

  13. Heterozygous splice mutation in PIK3R1 causes human immunodeficiency with lymphoproliferation due to dominant activation of PI3K

    PubMed Central

    Lucas, Carrie L.; Zhang, Yu; Venida, Anthony; Wang, Ying; Hughes, Jason; McElwee, Joshua; Butrick, Morgan; Matthews, Helen; Price, Susan; Biancalana, Matthew; Wang, Xiaochuan; Richards, Michael; Pozos, Tamara; Barlan, Isil; Ozen, Ahmet; Rao, V. Koneti; Su, Helen C.

    2014-01-01

    Class IA phosphatidylinositol 3-kinases (PI3K), which generate PIP3 as a signal for cell growth and proliferation, exist as an intracellular complex of a catalytic subunit bound to a regulatory subunit. We and others have previously reported that heterozygous mutations in PIK3CD encoding the p110δ catalytic PI3K subunit cause a unique disorder termed p110δ-activating mutations causing senescent T cells, lymphadenopathy, and immunodeficiency (PASLI) disease. We report four patients from three families with a similar disease who harbor a recently reported heterozygous splice site mutation in PIK3R1, which encodes the p85α, p55α, and p50α regulatory PI3K subunits. These patients suffer from recurrent sinopulmonary infections and lymphoproliferation, exhibit hyperactive PI3K signaling, and have prominent expansion and skewing of peripheral blood CD8+ T cells toward terminally differentiated senescent effector cells with short telomeres. The PIK3R1 splice site mutation causes skipping of an exon, corresponding to loss of amino acid residues 434–475 in the inter-SH2 domain. The mutant p85α protein is expressed at low levels in patient cells and activates PI3K signaling when overexpressed in T cells from healthy subjects due to qualitative and quantitative binding changes in the p85α–p110δ complex and failure of the C-terminal region to properly inhibit p110δ catalytic activity. PMID:25488983

  14. Association of Angiotensin Converting Enzyme I/D and α-actinin-3 R577X Genotypes with Growth Factors and Physical Fitness in Korean Children

    PubMed Central

    Ahn, Nayoung; Cheun, Wookwang; Byun, Jayoung; Joo, Youngsik

    2015-01-01

    This study analyzed the differences in aerobic and anaerobic exercise ability and growth-related indicators, depending on the polymorphism of the ACE and the ACTN3 genes, to understand the genetic influence of exercise ability in the growth process of children. The subjects of the study consisted of elementary school students (n=856, age 10.32±0.07 yr). The anthropometric parameters, physical fitness and growth factors were compared among groups of the ACE I/D or the ACTN3 R577X polymorphisms. There were no significant differences between the anthropometric parameters, physical fitness and growth factors for the ACE gene ID or the ACTN3 gene R577X polymorphism. However, the DD type of ACE gene was highest in the side step test (p<0.05), and the DD type was significantly higher than the II+ID type (p<0.05) in the early bone age. The combined group of the ACE gene II+ID and the ACTN3 gene XX type significantly showed lower early bone age (p< 0.05). This study did not find any individual or compounding effects of the polymorphism in the ACE I/D or the ACTN3 R577X polymorphisms on the anthropometric parameters, physical fitness and growth factors of Korean children. However, the exercise experience and the DD type of the ACE gene may affect the early maturity of the bones. PMID:25729275

  15. Development of sustainable waste management toward zero landfill waste for the petrochemical industry in Thailand using a comprehensive 3R methodology: A case study.

    PubMed

    Usapein, Parnuwat; Chavalparit, Orathai

    2014-06-01

    Sustainable waste management was introduced more than ten years ago, but it has not yet been applied to the Thai petrochemical industry. Therefore, under the philosophy of sustainable waste management, this research aims to apply the reduce, reuse, and recycle (3R) concept at the petrochemical factory level to achieve a more sustainable industrial solid waste management system. Three olefin plants in Thailand were surveyed for the case study. The sources and types of waste and existing waste management options were identified. The results indicate that there are four sources of waste generation: (1) production, (2) maintenance, (3) waste treatment, and (4) waste packaging, which correspond to 45.18%, 36.71%, 9.73%, and 8.37% of the waste generated, respectively. From the survey, 59 different types of industrial wastes were generated from the different factory activities. The proposed 3R options could reduce the amount of landfill waste to 79.01% of the amount produced during the survey period; this reduction would occur over a period of 2 years and would result in reduced disposal costs and reduced consumption of natural resources. This study could be used as an example of an improved waste management system in the petrochemical industry.

  16. Differential fate of metabolism of a sulfonated azo dye Remazol Orange 3R by plants Aster amellus Linn., Glandularia pulchella (Sweet) Tronc. and their consortium.

    PubMed

    Kabra, Akhil N; Khandare, Rahul V; Waghmode, Tatoba R; Govindwar, Sanjay P

    2011-06-15

    Plant consortium-AG of Aster amellus Linn. and Glandularia pulchella (Sweet) Tronc. showed complete decolorization of a dye Remazol Orange 3R in 36 h, while individually A. amellus and G. pulchella took 72 and 96 h respectively. Individually A. amellus showed induction in the activities of enzymes veratryl alcohol oxidase and DCIP reductase after degradation of the dye while G. pulchella showed induction of laccase and tyrosinase, indicating their involvement in the dye metabolism. Consortium-AG showed induction in the activities of lignin peroxidase, veratryl alcohol oxidase, laccase, tyrosinase and DCIP reductase. Two different sets of induced enzymes from A. amellus and G. pulchella work together in consortium-AG resulting in faster degradation of the dye. The degradation of the dye into different metabolites was confirmed using High Performance Liquid Chromatography and Fourier Transform Infra Red Spectroscopy. Gas Chromatography Mass Spectroscopy analysis identified four metabolites of dye degradation by A. amellus as acetamide, benzene, naphthalene and 3-diazenylnaphthalene-2-sulfonic acid, four metabolites by G. pulchella as acetamide, 3-diazenyl-4-hydroxynaphthalene-2-sulfonic acid, naphthalen-1-ol and (ethylsulfonyl)benzene, while two metabolites by consortium-AG as 2-(phenylsulfonyl)ethanol and N-(naphthalen-2-yl)acetamide. The non-toxic nature of the metabolites of Remazol Orange 3R degradation was revealed by phytotoxicity studies.

  17. Diastereomeric complex of ( R/ S)-piperidine-3-carboxylic acid with (2 R,3 R)-tartaric acid: Structural, spectroscopic and computational studies

    NASA Astrophysics Data System (ADS)

    Bartoszak-Adamska, E.; Dega-Szafran, Z.; Jaskólski, M.; Szafran, M.

    2011-07-01

    2:2 Complex of ( R) and ( S)-piperidine-3-carboxylic acids (P3C) with (2 R,3 R) -tartaric acid (TA), 1, has been characterized by single-crystal X-ray analysis, FTIR and NMR spectroscopies, and by DFT calculations. The crystals of 1 are monoclinic, space group P2 1. The crystal structure is formed by two distinct P3CH +·TA - components, A and B, linked by an O-H⋯O hydrogen bond of 2.603(2) Å. The A and B components differ in the absolute configuration of the C(3) atom of P3CH +; ( S) in A and ( R) in B. The piperidinium-3-carboxylic acid and (2 R,3 R)-semi-tartrate anion moieties of the components A and B are linked by O-H⋯O hydrogen bonds of 2.517(1) and 2.535(1) Å, respectively. In A and B the piperidinium rings adopt the chair conformation with the carboxyl group in the equatorial position. The structures of the monomers of P3CH +·TA -, 3A and 3B, as well as of a dimer 2, have been optimized by the B3LYP/6-31G(d,p) approach. The chemical shift assignments were based on two-dimensional 1H- 1H and 1H- 13C experiments.

  18. The identification of (3R,4S)-5-fluoro-5-deoxy-D-ribulose-1-phosphate as an intermediate in fluorometabolite biosynthesis in Streptomyces cattleya.

    PubMed

    Onega, Mayca; McGlinchey, Ryan P; Deng, Hai; Hamilton, John T G; O'Hagan, David

    2007-10-01

    (3R,4S)-5-Fluoro-5-deoxy-D-ribulose-1-phosphate (5-FDRulP) has been identified as the third fluorinated intermediate on the biosynthetic pathway to fluoroacetate and 4-fluorothreonine in Streptomyces cattleya. 5-FDRulP is generated after formation of 5'-fluoro-5'-deoxyadenosine (5'-FDA) and then phosphorolysis of 5'-FDA to 5-fluoro-5-deoxy-D-ribose-1-phosphate (5-FDRP) by the action of a purine nucleoside phosphorylase. An isomerase mediates the conversion of 5-FDRP to 5-FDRulP. The identity of the (3R,4S) diastereoisomer of 5-FDRulP was established by comparative (19)F{(1)H} NMR studies whereby 5-FDRulP that accumulated in a cell free extract of S. cattleya, was treated with a phytase to generate the non-phosphorylated sugar, 5-fluoro-5-deoxy-D-ribulose (5-FDRul). This S. cattleya product was compared to the product of an in-vitro biotransformation where separately 5-fluoro-5-deoxy-D-ribose and 5-fluoro-5-deoxy-D-xylose were converted to 5-fluoro-5-deoxy-D-ribulose and 5-fluoro-5-deoxy-D-xylulose respectively by the action of glucose isomerase. It was demonstrated that 5-fluoro-5-deoxy-D-ribose gave the identical diastereoisomer to that observed from 5-FDRulP.

  19. Association of MC3R gene polymorphisms with body weight in the red fox and comparative gene organization in four canids.

    PubMed

    Skorczyk, A; Flisikowski, K; Szydlowski, M; Cieslak, J; Fries, R; Switonski, M

    2011-02-01

    There are five genes encoding melanocortin receptors. Among canids, the genes have mainly been studied in the dog (MC1R, MC2R and MC4R). The MC4R gene has also been analysed in the red fox. In this report, we present a study of chromosome localization, comparative sequence analysis and polymorphism of the MC3R gene in the dog, red fox, arctic fox and Chinese raccoon dog. The gene was localized by FISH to the following chromosome: 24q24-25 in the dog, 14p16 in the red fox, 18q13 in the arctic fox and NPP4p15 in the Chinese raccoon dog. A high identity level of the MC3R gene sequences was observed among the species, ranging from 96.0% (red fox--Chinese raccoon dog) to 99.5% (red fox--arctic fox). Altogether, eight polymorphic sites were found in the red fox, six in the Chinese raccoon dog and two in the dog, while the arctic fox appeared to be monomorphic. In addition, association of several polymorphisms with body weight was analysed in red foxes (the number of genotyped animals ranged from 319 to 379). Two polymorphisms in the red fox, i.e. a silent substitution c.957A>C and c.*185C>T in the 3'-flanking sequence, showed a significant association (P < 0.01) with body weight.

  20. Development of sustainable waste management toward zero landfill waste for the petrochemical industry in Thailand using a comprehensive 3R methodology: A case study.

    PubMed

    Usapein, Parnuwat; Chavalparit, Orathai

    2014-06-01

    Sustainable waste management was introduced more than ten years ago, but it has not yet been applied to the Thai petrochemical industry. Therefore, under the philosophy of sustainable waste management, this research aims to apply the reduce, reuse, and recycle (3R) concept at the petrochemical factory level to achieve a more sustainable industrial solid waste management system. Three olefin plants in Thailand were surveyed for the case study. The sources and types of waste and existing waste management options were identified. The results indicate that there are four sources of waste generation: (1) production, (2) maintenance, (3) waste treatment, and (4) waste packaging, which correspond to 45.18%, 36.71%, 9.73%, and 8.37% of the waste generated, respectively. From the survey, 59 different types of industrial wastes were generated from the different factory activities. The proposed 3R options could reduce the amount of landfill waste to 79.01% of the amount produced during the survey period; this reduction would occur over a period of 2 years and would result in reduced disposal costs and reduced consumption of natural resources. This study could be used as an example of an improved waste management system in the petrochemical industry. PMID:24824168

  1. A multi-purpose system for water purification and sea-water softening.

    PubMed

    Barsky, L; Rubinstein, J; Barsky, S; Kirzhner, F; Bodul, O

    1998-01-01

    A novel technique that can be used for reacting toxic carbon dioxide (CO2) emissions from power plants and other combustion wastes with sea water is described. A chemical interaction between CO2 and the cations in sea water, with the pH electrolytically regulated, can precipitate almost all the calcium and magnesium ions, as well as some sodium and potassium ions, as carbonates and bicarbonates. The carbonates and bicarbonates thus prepared can then be mixed with ash to yield a building material. Sulfur ions will be neutralized with calcium and magnesium, and the remaining ions can be removed using reverse osmosis or some other method. The technology and equipment for purification are based on modules that can be used for industrial waste-water, sea water, solutions, and otherwise. The module for separation of sand and suspended coarse substances consists of a tank for flocculation, coagulation, and precipitation of solid particles; and a low-pressure hydrocyclone. The module for purification from oil and fine suspensions is based on column flotation, flotation with a special ejector, and adhesion flotation. The module for ions and colloids consists of an absorbing filter with zeolite, fly ash, and other absorbing materials. Using a laboratory model consisting of a special mini-plant, we processed 10 L of factory-waste water containing more than 20 g/L organic content (compare with the upper limit of 0.02 g/L allowed by the Ministry of Environmental Protection in Israel). After the experimental solution was treated and evaporated to a small bulk, the water obtained was almost clear. On the basis of the results in the model, we present a scaled-up process for the design, development, and production of equipment for and the assembly of a large installation for drainage and water purification.

  2. InsP3R-associated cGMP kinase substrate determines inositol 1,4,5-trisphosphate receptor susceptibility to phosphoregulation by cyclic nucleotide-dependent kinases.

    PubMed

    Masuda, Wataru; Betzenhauser, Matthew J; Yule, David I

    2010-11-26

    Ca(2+) release through inositol 1,4,5-trisphosphate receptors (InsP(3)R) can be modulated by numerous factors, including input from other signal transduction cascades. These events shape the spatio-temporal characteristics of the Ca(2+) signal and provide fidelity essential for the appropriate activation of effectors. In this study, we investigate the regulation of Ca(2+) release via InsP(3)R following activation of cyclic nucleotide-dependent kinases in the presence and absence of expression of a binding partner InsP(3)R-associated cGMP kinase substrate (IRAG). cGMP-dependent kinase (PKG) phosphorylation of only the S2+ InsP(3)R-1 subtype resulted in enhanced Ca(2+) release in the absence of IRAG expression. In contrast, IRAG bound to each InsP(3)R subtype, and phosphorylation of IRAG by PKG attenuated Ca(2+) release through all InsP(3)R subtypes. Surprisingly, simply the expression of IRAG attenuated phosphorylation and inhibited the enhanced Ca(2+) release through InsP(3)R-1 following cAMP-dependent protein kinase (PKA) activation. In contrast, IRAG expression did not influence the PKA-enhanced activity of the InsP(3)R-2. Phosphorylation of IRAG resulted in reduced Ca(2+) release through all InsP(3)R subtypes during concurrent activation of PKA and PKG, indicating that IRAG modulation is dominant under these conditions. These studies yield mechanistic insight into how cells with various complements of proteins integrate and prioritize signals from ubiquitous signaling pathways.

  3. Managing runoff and flow pathways in a small rural catchment to reduce flood risk with other multi-purpose benefits

    NASA Astrophysics Data System (ADS)

    Wilkinson, Mark; Welton, Phil; Kerr, Peter; Quinn, Paul; Jonczyk, Jennine

    2010-05-01

    From 2000 to 2009 there have been a high number of flood events throughout Northern Europe. Meanwhile, there is a demand for land in which to construct homes and businesses on, which is encroaching on land which is prone to flooding. Nevertheless, flood defences usually protect us from this hazard. However, the severity of floods and this demand for land has increased the number of homes which have been flooded in the past ten years. Public spending on flood defences can only go so far which targets the large populations first. Small villages and communities, where in many cases normal flood defences are not cost effective, tend to wait longer for flood mitigation strategies. The Belford Burn (Northumberland, UK) catchment is a small rural catchment that drains an area of 6 km2. It flows through the village of Belford. There is a history of flooding in Belford, with records of flood events dating back to 1877. Normal flood defences are not suitable for this catchment as it failed the Environment Agency (EA) cost benefit criteria for support. There was a desire by the local EA Flood Levy Team and the Northumbria Regional Flood Defence Committee at the Environment Agency to deliver an alternative catchment-based solution to the problem. The EA North East Flood Levy team and Newcastle University have created a partnership to address the flood problem using soft engineered runoff management features. Farm Integrated Runoff Management (FIRM) plans manage flow paths directly by storing slowing and filtering runoff at source on farms. The features are multipurpose addressing water quality, trapping sediment, creating new habitats and storing and attenuating flood flow. Background rainfall and stream stage data have been collected since November 2007. Work on the first mitigation features commenced in July 2008. Since that date five flood events have occurred in the catchment. Two of these flood events caused widespread damage in other areas of the county. However, in

  4. Heats of formation of Co(CO)(2)NOPR(3), R = CH(3) and C(2)H(5), and its ionic fragments.

    PubMed

    Gengeliczki, Zsolt; Sztáray, Bálint; Baer, Tomas; Iceman, Christopher; Armentrout, Peter B

    2005-07-01

    A joint threshold photoelectron photoion coincidence spectrometry (TPEPICO) and collision-induced dissociation (CID) study on the thermochemistry of Co(CO)(2)NOPR(3), R = CH(3) (Me) and C(2)H(5) (Et), complexes is presented. Adiabatic ionization energies of 7.36 +/- 0.04 and 7.24 +/- 0.04 eV, respectively, were extracted from scans of the total ion and threshold electron signals. In the TPEPICO study, the following 0 K onsets were determined for the various fragment ions: CoCONOPMe(3)(+), 8.30 +/- 0.05 eV; CoNOPMe(3)(+), 9.11 +/- 0.05 eV; CoPMe(3)(+) 10.80 +/- 0.05 eV; CoCONOPEt(3)(+), 8.14 +/- 0.05 eV; CoNOPEt(3)(+), 8.92 +/- 0.05 eV; and CoPEt(3)(+), 10.66 +/- 0.05 eV. These onsets were combined with the Co(+)-PR(3) (R = CH(3) and C(2)H(5)) bond dissociation energies of 2.88 +/- 0.11 and 3.51 +/- 0.17 eV, obtained from the TCID experiments, to derive the heats of formation of the neutral and ionic species. Thus, the Co(CO)(2)NOPR(3) (R = CH(3) and C(2)H(5)) 0 K heats of formation were found to be -350 +/- 13 and -376 +/- 18 kJ x mol(-)(1), respectively. These heats of formation were combined with the published heat of formation of Co(CO)(3)NO to determine the substitution enthalpies of the carbonyl to phosphine substitution reactions. Room-temperature values of the heats of formation are also given using the calculated harmonic vibrational frequencies. Analysis of the TCID experimental results provides indirectly the adiabatic ionization energies of the free phosphine ligands, P(CH(3))(3) and P(C(2)H(5))(3), of 7.83 +/- 0.03 and 7.50 +/- 0.03 eV, respectively.

  5. Investigating a multi-purpose target for electron linac based photoneutron sources for BNCT of deep-seated tumors

    NASA Astrophysics Data System (ADS)

    Masoudi, S. Farhad; Rasouli, Fatemeh S.

    2015-08-01

    Recent studies in BNCT have focused on investigating appropriate neutron sources as alternatives for nuclear reactors. As the most prominent facilities, the electron linac based photoneutron sources benefit from two consecutive reactions, (e, γ) and (γ, n). The photoneutron sources designed so far are composed of bipartite targets which involve practical problems and are far from the objective of achieving an optimized neutron source. This simulation study deals with designing a compact, optimized, and geometrically simple target for a photoneutron source based on an electron linac. Based on a set of MCNPX simulations, tungsten is found to have the potential of utilizing as both photon converter and photoneutron target. Besides, it is shown that an optimized dimension for such a target slows-down the produced neutrons toward the desired energy range while keeping them economy, which makes achieving the recommended criteria for BNCT of deep-tumors more available. This multi-purpose target does not involve complicated designing, and can be considered as a significant step toward finding application of photoneutron sources for in-hospital treatments. In order to shape the neutron beam emitted from such a target, the beam is planned to pass through an optimized arrangement of materials composed of moderators, filters, reflector, and collimator. By assessment with the recommended in-air parameters, it is shown that the designed beam provides high intensity of desired neutrons, as well as low background contamination. The last section of this study is devoted to investigate the performance of the resultant beam in deep tissue. A typical simulated liver tumor, located within a phantom of human body, was subjected to the irradiation of the designed spectrum. The dosimetric results, including evaluated depth-dose curves and carried out in-phantom parameters show that the proposed configuration establishes acceptable agreement between the appropriate neutron intensity, and

  6. Multipurpose Care Solution–Induced Corneal Surface Disruption and Pseudomonas aeruginosa Internalization in the Rabbit Corneal Epithelium

    PubMed Central

    Posch, Leila C.; Zhu, Meifang; Robertson, Danielle M.

    2014-01-01

    Purpose. To evaluate the effects of a chemically preserved multipurpose contact lens care solution (MPS) on the corneal epithelial surface and Pseudomonas aeruginosa (PA) internalization in the rabbit corneal epithelium. Methods. Rabbits were fit in one eye with a silicone hydrogel lens (balafilcon A) soaked overnight in a borate-buffered MPS (BioTrue). The contralateral eye was fit with a lens removed directly from the blister pack containing borate-buffered saline (control). Lenses were worn for 2 hours. Upon lens removal, corneas were challenged ex vivo with invasive PA strain 6487 and assessed for PA internalization. Ultrastructural changes were assessed using scanning electron (SEM) and transmission electron microscopy (TEM). Results. Scanning electron microscopy showed frank loss of surface epithelium in MPS-exposed eyes, while control eyes exhibited occasional loss of surface membranes but retention of intact junctional borders. Transmission electron microscopy data supported and extended SEM findings, demonstrating the presence of epithelial edema in MPS-treated eyes. There was a 12-fold increase in PA uptake into the corneal epithelium following wear of the MPS-treated lens compared to control (P = 0.008). Conclusions. These data demonstrate that corneal exposure to MPS during lens wear damages the surface epithelium and are consistent with our previous clinical data showing an increase in bacterial binding to exfoliated epithelial cells following MPS use with resultant increased risk for lens-mediated infection. These findings also demonstrate that the PA invasion assay may provide a highly sensitive quantitative metric for assessing the physiological impact of lens-solution biocompatibility on the corneal epithelium. PMID:24876286

  7. When Is a Laboratory a Laboratory?

    ERIC Educational Resources Information Center

    Roy, Ken

    1999-01-01

    Gives advice on the legal necessity of safety planning for school science (or other) laboratories. Recommends looking into governmental definitions of the term "laboratory" to determine which educational activities should be covered by safety planning. (WRM)

  8. AURORA BOREALIS - Icebreaking Deep-Sea Drilling Platform and Multi-Purpose Research Vessel

    NASA Astrophysics Data System (ADS)

    Lembke-Jene, L.; Biebow, N.; Kunz-Pirrung, M.; Thiede, J.; Egerton, P.; Azzolini, R.

    2009-04-01

    advanced ice-forecasting support. The vessel is planned to operate routinely without ice management support by additional icebreakers, thus reducing operational costs for scientific drilling in polar regions considerably. Two moon-pools (7x7 m each) will allow routine deployment of Remotely Operated Vehicles (ROV) and Autonomous Underwater Vehicles (AUV) in ice conditions. A dedicated deep-sea drilling rig with full weather protection will enable sampling of the ocean floor in water depths between 100 and 5000 m with more than 1000 m penetration under polar conditions. The modular arrangement of science space with hangars, the possibility to flexibly equip the ship with laboratory or supply containers and with helicopters, addresses the needs of diverse disciplines in marine research. This icebreaker will allow to stage long international, interdisciplinary drilling expeditions in the central Arctic. In a long-term perspective, AURORA BOREALIS will also be used to address Antarctic research targets, both in its mode as a regular research and a scientific drilling vessel.

  9. Association analysis of the ACTN3 R577X polymorphism and complex quantitative body composition and performance phenotypes in adolescent Greeks.

    PubMed

    Moran, Colin N; Yang, Nan; Bailey, Mark E S; Tsiokanos, Athanasios; Jamurtas, Athanasios; MacArthur, Daniel G; North, Kathryn; Pitsiladis, Yannis P; Wilson, Richard H

    2007-01-01

    The functional allele (577R) of ACTN3, which encodes human alpha-actinin-3, has been reported to be associated with elite athletic status and with response to resistance training, while the nonfunctional allele (577X) has been proposed as a candidate metabolically thrifty allele. In a study of 992 adolescent Greeks, we show that there is a significant association (P=0.003) between the ACTN3 R577X polymorphism and 40 m sprint time in males that accounts for 2.3% of phenotypic variance, with the 577R allele contributing to faster times in an additive manner. The R577X polymorphism is not associated with other power phenotypes related to 40 m sprint, nor with an endurance phenotype. Furthermore, the polymorphism is not associated with obesity-related phenotypes in our population, suggesting that the 577X allele is not a thrifty allele, and thus the persistence of this null allele must be explained in other terms.

  10. Crystallization and preliminary X-ray study of a (2R,3R)-2,3-butanediol dehydrogenase from Bacillus coagulans 2-6

    PubMed Central

    Miao, Xiangzhi; Huang, Xianhui; Zhang, Guofang; Zhao, Xiufang; Zhu, Xianming; Dong, Hui

    2013-01-01

    (2R,3R)-2,3-Butanediol dehydrogenase (R,R-BDH) from Bacillus coagulans 2-6 is a zinc-dependent medium-chain alcohol dehydrogenase. Recombinant R,R-BDH with a His6 tag at the C-terminus was expressed in Escherichia coli BL21 (DE3) cells and purified by Ni2+-chelating affinity and size-exclusion chromatography. Crystals were grown by the hanging-drop vapour-diffusion method at 289 K. The crystallization condition consisted of 8%(v/v) Tacsimate pH 4.6, 18%(w/v) polyethylene glycol 3350. The crystal diffracted to 2.8 Å resolution in the orthorhombic space group P212121, with unit-cell parameters a = 88.35, b = 128.73, c = 131.03 Å. PMID:24100567

  11. Structure determination of the ({radical} (3) {times}{radical} (3) )R30{degree} boron phase on the Si(111) surface using photoelectron diffraction

    SciTech Connect

    Baumgaertel, P.; Paggel, J.J.; Hasselblatt, M.; Horn, K.; Fernandez, V.; Schaff, O.; Weaver, J.H.; Bradshaw, A.M.; Woodruff, D.P.; Rotenberg, E.; Denlinger, J.

    1999-05-01

    A quantitative structural analysis of the system Si(111)({radical} (3) {times}{radical} (3) )R30{degree}-B has been performed using photoelectron diffraction in the scanned energy mode. We confirm that the substitutional S{sub 5} adsorption site is occupied and show that the interatomic separations to the three nearest-neighbor Si atoms are 1.98({plus_minus}0.04) {Angstrom}thinsp, 2.14({plus_minus}0.13) {Angstrom}thinsp, and 2.21({plus_minus}0.12) {Angstrom}thinsp. These correspond to the silicon atom immediately below the boron atom, the adatom immediately above, and the three atoms to which it is coordinated symmetrically in the first layer. {copyright} {ital 1999} {ital The American Physical Society}

  12. Brucine salts of L-alpha-hydroxy acids: brucinium hydrogen (S)-malate pentahydrate and anhydrous brucinium hydrogen (2R,3R)-tartrate at 130 K.

    PubMed

    Smith, Graham; Wermuth, Urs D; White, Jonathan M

    2006-06-01

    The structures of two brucinium (2,3-dimethoxy-10-oxostrychnidinium) salts of the alpha-hydroxy acids L-malic acid and L-tartaric acid, namely brucinium hydrogen (S)-malate pentahydrate, C23H27N2O4+.C4H5O5-.5H2O, (I), and anhydrous brucinium hydrogen (2R,3R)-tartrate, C23H27N2O4+.C4H5O6-,(II), have been determined at 130 K. Compound (I) has two brucinium cations, two hydrogen malate anions and ten water molecules of solvation in the asymmetric unit, and forms an extensively hydrogen-bonded three-dimensional framework structure. In compound (II), the brucinium cations form the common undulating brucine sheet substructures, which accommodate parallel chains of head-to-tail hydrogen-bonded tartrate anion species in the interstitial cavities.

  13. Thermal evolution of the spin ordering at the concomitant spin-orbital rearrangement temperature in RVO3 (R=Lu, Yb and Tm)

    NASA Astrophysics Data System (ADS)

    Sarkar, Tapati; Ivanov, Sergey A.; Bazuev, G. V.; Nordblad, Per; Mathieu, Roland

    2016-07-01

    Synthesis, crystal structure and magnetization measurements of phase pure polycrystalline RVO3 (R=Lu, Yb and Tm) are reported. The compounds were stabilized in the orthorhombic structure by thermal treatment of the respective precursors (RVO4) in a reducing atmosphere. Special pressure treatment was carried out during the synthesis to ensure phase pure samples without secondary phases. Magnetization measurements reveal the presence of two spin ordering temperatures in the samples. Interestingly, at the lower spin ordering temperature, TSO2, the uncompensated excess moment of the antiferromagnetic spin structure has different field dependences above and below TSO2, causing a jump in the thermal evolution of the magnetization that changes sign with increasing field strength. This jump is associated with the reported magnetic and orbital rearrangement in the samples, and the different spin configurations in the C- and G-type antiferromagnetic structures.

  14. Evaluation of ischemia and myocardial viability in patients with coronary artery disease (CAD) with iodine-123-labeled 15-(p-iodophenyl)-3-R,S-methylpentadecanoic acid (BMIPP)

    SciTech Connect

    Kropp, J.; Joergens, M.; Glaenzer, K.P.; Luederitz, B.; Biersack, H.J.; Knapp, F.F. Jr.

    1993-10-01

    Twenty patients with coronary artery disease (CAD) controlled by coronary arteriography (CA) and biplane left ventricular cineventriculography (LVCV) were investigated with the 15- (p[I-123]iodophenyl)-3-R,S-methylpentadecanoic acid (BMIPP) fatty acid analogue. During maximal symptom limited exercise 5 mCi (200 MBq) of BMIPP were injected followed by two SPECT studies within three hours. After another 30 min, with the patient at rest a third SPECT was performed after reinjection of 3 mCi (100 MBq) BMIPP. Visual inspection of the short and long axis slices and quantitative comparison of the short axis slices of the tomograms were performed to grade BMIPP uptake and refill and detect turnover abnormalities. These were addressed either as scar or as ischemia and compared to CA and a graded score of regional wall motion by LVCV which provided values for sensitivity (SE) and specificity (SP) to detect CAD. Fifteen infarctions had corresponded clinical, angiographic and scintigraphic findings in 93%.

  15. Application of a novel integrated toxicity testing strategy incorporating "3R" principles of animal research to evaluate the safety of a new agrochemical sulfoxaflor.

    PubMed

    Terry, Claire; Rasoulpour, Reza J; Saghir, Shakil; Marty, Sue; Gollapudi, B Bhaskar; Billington, Richard

    2014-05-01

    Plant protection products (PPPs) and the active substance(s) contained within them are rigorously and comprehensively tested prior to registration to ensure that human health is not impacted by their use. In recent years, there has been a widespread drive to have more relevant testing strategies (e.g., ILSI/HESI-ACSA and new EU Directives), which also take account of animal welfare, including the 3R (replacement, refinement, and reduction) principles. The toxicity potential of one such new active substance, sulfoxaflor, a sulfoximine insecticide (CAS #946578-00-3), was evaluated utilizing innovative testing strategies comprising: (1) an integrated testing scheme to optimize information obtained from as few animals as possible (i.e., 3R principles) through modifications of standard protocols, such as enhanced palatability study design, to include molecular endpoints, additional neurotoxicity and immunotoxicity parameters in a subchronic toxicity study, and combining multiple test guidelines into one study protocol; (2) generation of toxicokinetic data across dose levels, sexes, study durations, species, strains and life stages, without using satellite animals, which was a first for PPP development, and (3) addition of prospective mode of action (MoA) endpoints within repeat dose toxicity studies as well as proactive inclusion of specific MoA studies as an integral part of the development program. These novel approaches to generate key data early in the safety evaluation program facilitated informed decision-making on the need for additional studies and contributed to a more relevant human health risk assessment. This supplement also contains papers which describe in more detail the approach taken to establish the MoA and human relevance framework related to toxicities elicited by sulfoxaflor in the mammalian toxicology studies: developmental toxicity in rats mediated via the fetal muscle nicotinic acetylcholine receptor (nAChR) ( Ellis-Hutchings et al. 2014 ); liver

  16. Yeast peroxisomal multifunctional enzyme: (3R)-hydroxyacyl-CoA dehydrogenase domains A and B are required for optimal growth on oleic acid.

    PubMed

    Qin, Y M; Marttila, M S; Haapalainen, A M; Siivari, K M; Glumoff, T; Hiltunen, J K

    1999-10-01

    The yeast peroxisomal (3R)-hydroxyacyl-CoA dehydrogenase/2-enoyl-CoA hydratase 2 (multifunctional enzyme type 2; MFE-2) has two N-terminal domains belonging to the short chain alcohol dehydrogenase/reductase superfamily. To investigate the physiological roles of these domains, here called A and B, Saccharomyces cerevisiae fox-2 cells (devoid of Sc MFE-2) were taken as a model system. Gly(16) and Gly(329) of the S. cerevisiae A and B domains, corresponding to Gly(16), which is mutated in the human MFE-2 deficiency, were mutated to serine and cloned into the yeast expression plasmid pYE352. In oleic acid medium, fox-2 cells transformed with pYE352:: ScMFE-2(aDelta) and pYE352::ScMFE-2(bDelta) grew slower than cells transformed with pYE352::ScMFE-2, whereas cells transformed with pYE352::ScMFE-2(aDeltabDelta) failed to grow. Candida tropicalis MFE-2 with a deleted hydratase 2 domain (Ct MFE- 2(h2Delta)) and mutational variants of the A and B domains (Ct MFE- 2(h2DeltaaDelta), Ct MFE- 2(h2DeltabDelta), and Ct MFE- 2(h2DeltaaDeltabDelta)) were overexpressed and characterized. All proteins were dimers with similar secondary structure elements. Both wild type domains were enzymatically active, with the B domain showing the highest activity with short chain and the A domain with medium and long chain (3R)-hydroxyacyl-CoA substrates. The data show that the dehydrogenase domains of yeast MFE-2 have different substrate specificities required to allow the yeast to propagate optimally on fatty acids as the carbon source.

  17. Tissue-specific differences in the spatial interposition of X-chromosome and 3R chromosome regions in the malaria mosquito Anopheles messeae Fall.

    PubMed

    Artemov, Gleb; Bondarenko, Semen; Sapunov, Gleb; Stegniy, Vladimir

    2015-01-01

    Spatial organization of a chromosome in a nucleus is very important in biology but many aspects of it are still generally unresolved. We focused on tissue-specific features of chromosome architecture in closely related malaria mosquitoes, which have essential inter-specific differences in polytene chromosome attachments in nurse cells. We showed that the region responsible for X-chromosome attachment interacts with nuclear lamina stronger in nurse cells, then in salivary glands cells in Anopheles messeae Fall. The inter-tissue differences were demonstrated more convincingly in an experiment of two distinct chromosomes interposition in the nucleus space of cells from four tissues. Microdissected DNA-probes from nurse cells X-chromosome (2BC) and 3R chromosomes (32D) attachment regions were hybridized with intact nuclei of nurse cells, salivary gland cells, follicle epithelium cells and imaginal disсs cells in 3D-FISH experiments. We showed that only salivary gland cells and follicle epithelium cells have no statistical differences in the interposition of 2BC and 32D. Generally, the X-chromosome and 3R chromosome are located closer to each other in cells of the somatic system in comparison with nurse cells on average. The imaginal disсs cell nuclei have an intermediate arrangement of chromosome interposition, similar to other somatic cells and nurse cells. In spite of species-specific chromosome attachments there are no differences in interposition of nurse cells chromosomes in An. messeae and An. atroparvus Thiel. Nurse cells have an unusual chromosome arrangement without a chromocenter, which could be due to the special mission of generative system cells in ontogenesis and evolution.

  18. Association of ACTN3 R577X but not ACE I/D gene variants with elite rugby union player status and playing position

    PubMed Central

    Kilduff, L. P.; Erskine, R. M.; Day, S. H.; McPhee, J. S.; McMahon, G. E.; Stebbings, G. K.; Neale, J. P. H.; Lockey, S. J.; Ribbans, W. J.; Cook, C. J.; Vance, B.; Raleigh, S. M.; Roberts, C.; Bennett, M. A.; Wang, G.; Collins, M.; Pitsiladis, Y. P.; Williams, A. G.

    2016-01-01

    We aimed to quantify the ACE I/D and ACTN3 R577X (rs1815739) genetic variants in elite rugby athletes (rugby union and league) and compare genotype frequencies to controls and between playing positions. The rugby athlete cohort consisted of 507 Caucasian men, including 431 rugby union athletes that for some analyses were divided into backs and forwards and into specific positional groups: front five, back row, half backs, centers, and back three. Controls were 710 Caucasian men and women. Real-time PCR of genomic DNA was used to determine genotypes using TaqMan probes and groups were compared using χ2 and odds ratio (OR) statistics. Correction of P values for multiple comparisons was according to Benjamini-Hochberg. There was no difference in ACE I/D genotype between groups. ACTN3 XX genotype tended to be underrepresented in rugby union backs (15.7%) compared with forwards (24.8%, P = 0.06). Interestingly, the 69 back three players (wings and full backs) in rugby union included only six XX genotype individuals (8.7%), with the R allele more common in the back three (68.8%) than controls (58.0%; χ2 = 6.672, P = 0.04; OR = 1.60) and forwards (47.5%; χ2 = 11.768, P = 0.01; OR = 2.00). Association of ACTN3 R577X with playing position in elite rugby union athletes suggests inherited fatigue resistance is more prevalent in forwards, while inherited sprint ability is more prevalent in backs, especially wings and full backs. These results also demonstrate the advantage of focusing genetic studies on a large cohort within a single sport, especially when intrasport positional differences exist, instead of combining several sports with varied demands and athlete characteristics. PMID:26757799

  19. Association of ACTN3 R577X but not ACE I/D gene variants with elite rugby union player status and playing position.

    PubMed

    Heffernan, S M; Kilduff, L P; Erskine, R M; Day, S H; McPhee, J S; McMahon, G E; Stebbings, G K; Neale, J P H; Lockey, S J; Ribbans, W J; Cook, C J; Vance, B; Raleigh, S M; Roberts, C; Bennett, M A; Wang, G; Collins, M; Pitsiladis, Y P; Williams, A G

    2016-03-01

    We aimed to quantify the ACE I/D and ACTN3 R577X (rs1815739) genetic variants in elite rugby athletes (rugby union and league) and compare genotype frequencies to controls and between playing positions. The rugby athlete cohort consisted of 507 Caucasian men, including 431 rugby union athletes that for some analyses were divided into backs and forwards and into specific positional groups: front five, back row, half backs, centers, and back three. Controls were 710 Caucasian men and women. Real-time PCR of genomic DNA was used to determine genotypes using TaqMan probes and groups were compared using χ(2) and odds ratio (OR) statistics. Correction of P values for multiple comparisons was according to Benjamini-Hochberg. There was no difference in ACE I/D genotype between groups. ACTN3 XX genotype tended to be underrepresented in rugby union backs (15.7%) compared with forwards (24.8%, P = 0.06). Interestingly, the 69 back three players (wings and full backs) in rugby union included only six XX genotype individuals (8.7%), with the R allele more common in the back three (68.8%) than controls (58.0%; χ(2) = 6.672, P = 0.04; OR = 1.60) and forwards (47.5%; χ(2) = 11.768, P = 0.01; OR = 2.00). Association of ACTN3 R577X with playing position in elite rugby union athletes suggests inherited fatigue resistance is more prevalent in forwards, while inherited sprint ability is more prevalent in backs, especially wings and full backs. These results also demonstrate the advantage of focusing genetic studies on a large cohort within a single sport, especially when intrasport positional differences exist, instead of combining several sports with varied demands and athlete characteristics.

  20. THERMAL EVALUATION OF THE USE OF BWR MOX SNF IN THE MULTI-PURPOSE CANISTER (MPC) WITH ACD DISPOSAL CONTAINER (SCPB: N/A)

    SciTech Connect

    T.L. Lotz

    1995-11-13

    This analysis is prepared by the Mined Geologic Disposal System (MGDS) Waste Package Development Department (WPDD) as specified in the Waste Package Implementation Plan (pp. 4-8,4-11,4-24,5-1, and 5-13; Ref. 5.10) and Waste Package Plan (pp. 3-15,3-17, and 3-24; Ref. 5.9). The design data request addressed herein is: (1) Characterize the conceptual 40 BWR Multi-Purpose Canister (MPC) Waste Package (WP) design to show that the design is feasible for use in the MGDS environment when loaded with BWR MOX SNF. (2) Characterize the conceptual 24 BWR Multi-Purpose Canister (MPC) Waste Package (WP) design to show that the design is feasible for use in the MGDS environment when loaded with BWR MOX SNF. The purpose of this analysis is to respond a concern that the long-term disposal thermal issues for the Multi-Purpose Canister (MPC) Subsystem Design, if used with SNF designed for a MOX fuel cycle, do not preclude MPC compatibility with the MGDS. The objective of this analysis is to provide thermal parameter information for the conceptual MPC design with disposal container which is loaded with BWR MOX SNF under nominal MGDS repository conditions. The results are intended to show that the design has a reasonable chance to meet the MGDS design requirements for normal MGDS operation, to provide the required guidance to determining the major design issues for future design efforts, and to show that the BWR MOX SNF loaded MPC performance is similar to an MPC loaded with commercial BWR SNF. Future design efforts will focus on specific MPC vendor designs and BWR MOX SNF designs when they become available.

  1. Spin Forming of an Aluminum 2219-T6 Aft Bulkhead for the Orion Multi-Purpose Crew Vehicle: Phase II Supplemental Report

    NASA Technical Reports Server (NTRS)

    Piascik, Robert S.; Squire, Michael D.; Domack, Marcia S.; Hoffman, Eric K.

    2015-01-01

    The principal focus of this project was to assist the Orion Multi-Purpose Crew Vehicle (MPCV) Program in developing a spin forming fabrication process for manufacture of the aft bulkhead of the pressure vessel. The spin forming process will enable a single piece aluminum (Al) 2219 aft bulkhead which will eliminate the current multiple piece welded construction, simplify fabrication, and lead to an enhanced design that will reduce vehicle weight by eliminating welds. Phase I of this assessment explored spin forming the single-piece forward pressure vessel bulkhead from aluminum-lithium 2195.

  2. Applying spatial analysis techniques to assess the suitability of multipurpose uses of spring water in the Jiaosi Hot Spring Region, Taiwan

    NASA Astrophysics Data System (ADS)

    Jang, Cheng-Shin

    2016-04-01

    The Jiaosi Hot Spring Region is located in northeastern Taiwan and is rich in geothermal springs. The geothermal development of the Jiaosi Hot Spring Region dates back to the 18th century and currently, the spring water is processed for various uses, including irrigation, aquaculture, swimming, bathing, foot spas, and recreational tourism. Because of the proximity of the Jiaosi Hot Spring Region to the metropolitan area of Taipei City, the hot spring resources in this region attract millions of tourists annually. Recently, the Taiwan government is paying more attention to surveying the spring water temperatures in the Jiaosi Hot Spring Region because of the severe spring water overexploitation, causing a significant decline in spring water temperatures. Furthermore, the temperature of spring water is a reliable indicator for exploring the occurrence and evolution of springs and strongly affects hydrochemical reactions, components, and magnitudes. The multipurpose uses of spring water can be dictated by the temperature of the water. Therefore, accurately estimating the temperature distribution of the spring water is critical in the Jiaosi Hot Spring Region to facilitate the sustainable development and management of the multipurpose uses of the hot spring resources. To evaluate the suitability of spring water for these various uses, this study spatially characterized the spring water temperatures of the Jiaosi Hot Spring Region by using ordinary kriging (OK), sequential Gaussian simulation (SGS), and geographical information system (GIS). First, variogram analyses were used to determine the spatial variability of spring water temperatures. Next, OK and SGS were adopted to model the spatial distributions and uncertainty of the spring water temperatures. Finally, the land use (i.e., agriculture, dwelling, public land, and recreation) was determined and combined with the estimated distributions of the spring water temperatures using GIS. A suitable development strategy

  3. The Role of Combination Techniques in Maximizing the Utility of Precipitation Estimates from Several Multi-Purpose Remote-Sensing Systems

    NASA Technical Reports Server (NTRS)

    Huffman, George J.; Adler, Robert F.; Bolvin, David T.; Curtis, Scott; Einaudi, Franco (Technical Monitor)

    2001-01-01

    Multi-purpose remote-sensing products from various satellites have proved crucial in developing global estimates of precipitation. Examples of these products include low-earth-orbit and geosynchronous-orbit infrared (leo- and geo-IR), Outgoing Longwave Radiation (OLR), Television Infrared Operational Satellite (TIROS) Operational Vertical Sounder (TOVS) data, and passive microwave data such as that from the Special Sensor Microwave/ Imager (SSM/I). Each of these datasets has served as the basis for at least one useful quasi-global precipitation estimation algorithm; however, the quality of estimates varies tremendously among the algorithms for the different climatic regions around the globe.

  4. Chemistry Laboratory Safety Check

    ERIC Educational Resources Information Center

    Patnoe, Richard L.

    1976-01-01

    An accident prevention/safety check list for chemistry laboratories is printed. Included are checks of equipment, facilities, storage and handling of chemicals, laboratory procedures, instruction procedures, and items to be excluded from chemical laboratories. (SL)

  5. [Theme: Using Laboratories.

    ERIC Educational Resources Information Center

    Pritchard, Jack; Braker, Clifton

    1982-01-01

    Pritchard discusses the opportunities for applied learning afforded by laboratories. Braker describes the evaluation of cognitive, affective, and psychomotor skills in the agricultural mechanics laboratory. (SK)

  6. Multipurpose Transportation, Aging, and Disposal Canisters for Used Nuclear Fuel - Getting From Here to There and Beyond

    SciTech Connect

    McCullum, R.

    2008-07-01

    The idea of a universal canister system, in which used fuel can be placed at reactor sites, transported and - without ever needing to be re-opened -, disposed of in a geologic repository, is certainly not new. Originally proposed by DOE in the early 1990's as the Multi-Purpose Canister (MPC) system, this common sense idea has always had considerable appeal as a means to reduce used fuel handling and simplify repository surface facility operations. However, difficulties in launching the development of such a system, in the face of large uncertainties in repository design and limited program funding, caused the original MPC project to be abandoned in 1997. Then, after eight years of inactivity in this area, DOE, while experiencing difficulty completing the repository surface facility design and having missed a December 2004 deadline for submittal of a repository license application to the Nuclear Regulatory Commission (NRC), re-proposed the concept. Under this renewed initiative, the MPC systems were renamed as Transportation, Aging, and Disposal or TAD canister systems. DOE's repository design had advanced significantly at this point and industry, having gained considerable experience through the design, licensing, manufacture, and loading of over 800 used fuel dry storage systems, was well positioned to provide DOE with the meaningful technical input that would be necessary to bring the TAD concept to reality. With a firm foundation on which to build, industry actively engaged DOE in an extensive series of interactions to facilitate TAD development. This paper describes the evolution of the TAD concept through the industry/DOE dialogue that occurred over an 18 month period beginning in January 2006. It discusses the technical issues that were addressed and resolved through this collaboration. Successful completion of this dialogue led to the issuance, by DOE, of a final TAD design specification in July, 2007. This specification is being used by DOE as a fundamental

  7. The ACTN3 R577X polymorphism affects the lipid profile and the prognosis of nutritional intervention in HIV-positive patients.

    PubMed

    Aranalde, Laura C R; Pederzoli, Bruna S; Marten, Thais; Barros, Flavio C; Basso, Rossana P; Silveira, Jussara M; Valle, Sandra C; Pieniz, Simone; Araujo, Ronaldo C; Paredes-Gamero, Edgar J; Schadock, Ines; Schneider, Augusto; Barros, Carlos C

    2016-06-01

    The hypothesis of the present study is that the polymorphisms in the APOC3, CEPT, ACE, and ACTN3 genes can affect the outcome of nutritional intervention and the plasma lipid profile of HIV+ patients. To test the hypothesis, genetic material was collected from buccal cells, and serum was collected for biochemical analysis. Sixty-five patients were analyzed. The incorporation of protease inhibitor (PI) was more frequent in women (77% vs 33% in men). Nutritional intervention improved anthropometric parameters independent of the genotype. Patients with the RR genotype for the ACTN3 R577X polymorphism had lower glycemia (RR = 95.4 ± 6.5 mg/dL, RX = 102.6 ± 10.6 mg/dL, XX = 110.1 ± 16.3 mg/dL; P = .03) and a greater reduction in low-density lipoproteins (LDL) after intervention (LDL: RR = -23.7 ± 15.8 mg/dL, RX = 1.32 ± 5.13 mg/dL, XX = 30.21 ± 24.4 mg/dL; P = .01). Patients using PI had a negative response to dietary intervention regarding the levels of high-density lipoprotein (-2.4 ± 1.70 with PI, 2.56 ± 1.60 mg/dL without PI; P = .02), very low density lipoprotein (0.84 ± 2.73 with IP, -5.46 ± 3.37 mg/dL without PI; P = .03), and triglycerides (1.79 ± 13.22 with PI, -34.00 ± 17.67 mg/dL without PI; P = .052). This response was also independent of the genotype (P > 0.05) and suggested the need for oral lipid-lowering drugs in all HIV+ patients using PI. Our results indicate that the ACTN3 R577X polymorphism is a good predictor of both the lipid profile and the prognosis of nutritional intervention in reducing LDL in HIV+ patients. PMID:27188902

  8. The ACTN3 R577X polymorphism affects the lipid profile and the prognosis of nutritional intervention in HIV-positive patients.

    PubMed

    Aranalde, Laura C R; Pederzoli, Bruna S; Marten, Thais; Barros, Flavio C; Basso, Rossana P; Silveira, Jussara M; Valle, Sandra C; Pieniz, Simone; Araujo, Ronaldo C; Paredes-Gamero, Edgar J; Schadock, Ines; Schneider, Augusto; Barros, Carlos C

    2016-06-01

    The hypothesis of the present study is that the polymorphisms in the APOC3, CEPT, ACE, and ACTN3 genes can affect the outcome of nutritional intervention and the plasma lipid profile of HIV+ patients. To test the hypothesis, genetic material was collected from buccal cells, and serum was collected for biochemical analysis. Sixty-five patients were analyzed. The incorporation of protease inhibitor (PI) was more frequent in women (77% vs 33% in men). Nutritional intervention improved anthropometric parameters independent of the genotype. Patients with the RR genotype for the ACTN3 R577X polymorphism had lower glycemia (RR = 95.4 ± 6.5 mg/dL, RX = 102.6 ± 10.6 mg/dL, XX = 110.1 ± 16.3 mg/dL; P = .03) and a greater reduction in low-density lipoproteins (LDL) after intervention (LDL: RR = -23.7 ± 15.8 mg/dL, RX = 1.32 ± 5.13 mg/dL, XX = 30.21 ± 24.4 mg/dL; P = .01). Patients using PI had a negative response to dietary intervention regarding the levels of high-density lipoprotein (-2.4 ± 1.70 with PI, 2.56 ± 1.60 mg/dL without PI; P = .02), very low density lipoprotein (0.84 ± 2.73 with IP, -5.46 ± 3.37 mg/dL without PI; P = .03), and triglycerides (1.79 ± 13.22 with PI, -34.00 ± 17.67 mg/dL without PI; P = .052). This response was also independent of the genotype (P > 0.05) and suggested the need for oral lipid-lowering drugs in all HIV+ patients using PI. Our results indicate that the ACTN3 R577X polymorphism is a good predictor of both the lipid profile and the prognosis of nutritional intervention in reducing LDL in HIV+ patients.

  9. Laboratory Information Systems.

    PubMed

    Henricks, Walter H

    2015-06-01

    Laboratory information systems (LISs) supply mission-critical capabilities for the vast array of information-processing needs of modern laboratories. LIS architectures include mainframe, client-server, and thin client configurations. The LIS database software manages a laboratory's data. LIS dictionaries are database tables that a laboratory uses to tailor an LIS to the unique needs of that laboratory. Anatomic pathology LIS (APLIS) functions play key roles throughout the pathology workflow, and laboratories rely on LIS management reports to monitor operations. This article describes the structure and functions of APLISs, with emphasis on their roles in laboratory operations and their relevance to pathologists.

  10. The 3R modification of LixTiS2 - insights into local electronic structures from high-temperature in situ NMR spectroscopy

    NASA Astrophysics Data System (ADS)

    Wilkening, Martin

    2015-03-01

    Titanium disulphide was one of the very first electrode materials investigated to serve as insertion host in rechargeable, that is secondary lithium-ion batteries. At room temperature the trigonal, layer structured modification exists that can easily accommodate Li ions up to the composition ?. With increasing temperature, however, the present results give evidence that ? (?) transforms into a new crystal structure that is expected to be metastable at room temperature. Here, this high-temperature modification is attributed to the 3R polymorph previously described by Colbow et al. Quite recently, the same phase has been characterized by X-ray diffraction and Rietveld refinement. In the present work, nuclear magnetic resonance (NMR) spectroscopy is used to follow up this transformation in situ; it is able to monitor the associated changes of local electronic structures sensed by the lithium ions. Indeed, via in situ NMR, which has been carried out at temperatures as high as 1023 K, it was possible to directly reveal the evolution of a metastable phase which reversibly forms upon heating the trigonal starting material ?.

  11. Magnetic and dielectric study of R{sub 0.5}Sr{sub 0.5}MnO{sub 3} (R = Gd, Tb and Dy)

    SciTech Connect

    Yoshii, Kenji; Hiramitsu, Yusuke; Okajima, Yuka; Yoneda, Yasuhiro; Nishihata, Yasuo; Mizuki, Jun'ichiro; Nakamura, Akio; Shimojo, Yutaka; Ishii, Yoshinobu; Morii, Yukio; Ikeda, Naoshi

    2010-11-15

    Magnetic and dielectric properties of perovskite manganites R{sub 0.5}Sr{sub 0.5}MnO{sub 3} (R = Gd, Tb and Dy) have been investigated. DC and AC magnetic measurements showed short-range glassy magnetic ordering at T{sub g} {approx} 40 K. Such ordering was observed by neutron diffraction and is ascribable to the size mismatch of R{sup 3+} and Sr{sup 3+} settled randomly at the same crystallographic site. Dielectric constants for each material were {approx}1000-10,000 between {approx}50 and {approx}300 K and showed broad maximums above T{sub g}. Dielectric dispersion showed poor coherency of the motion of polar regions, plausibly because of the size-mismatch effect; both the magnetic and dielectric properties of this system are governed by the randomness at the R/Sr site. The tan {delta} and EXAFS data suggest that the dielectric response is rooted in a transfer of the Mn-3d electrons.

  12. Modulation of electronic properties from stacking orders and spin-orbit coupling for 3R-type MoS2

    NASA Astrophysics Data System (ADS)

    Fan, Xiaofeng; Zheng, W. T.; Kuo, Jer-Lai; Singh, David J.; Sun, C. Q.; Zhu, W.

    2016-04-01

    Two-dimensional crystals stacked by van der Waals coupling, such as twisted graphene and coupled graphene-BN layers with unusual phenomena have been a focus of research recently. As a typical representative, with the modulation of structural symmetry, stacking orders and spin-orbit coupling, transitional metal dichalcogenides have shown a lot of fascinating properties. Here we reveal the effect of stacking orders with spin-orbit coupling on the electronic properties of few-layer 3R-type MoS2 by first principles methods. We analyze the splitting of states at the top of valence band and the bottom of conduction band, following the change of stacking order. We find that regardless of stacking orders and layers’ number, the spin-up and spin-down channels are evidently separated and can be as a basis for the valley dependent spin polarization. With a model Hamiltonian about the layer’s coupling, the band splitting can be effectively analyzed by the coupling parameters. It is found that the stacking sequences, such as abc and abca, have the stronger nearest-neighbor coupling which imply the popular of periodic abc stacking sequence in natural growth of MoS2.

  13. Investigation of the (√3 × √3)R30°-Cu 2Si/Cu(1 1 1) surface alloy using DFT

    NASA Astrophysics Data System (ADS)

    Shuttleworth, I. G.

    2011-05-01

    The electronic structure of the FCC, HCP and 2-fold bridge phases of the (√3 × √3)R30°-Cu 2Si/Cu(1 1 1) surface alloy have been investigated using LCAO-DFT. Analysis of the total electron density, partial density-of-states (PDOS) and crystal orbital overlap population (COOP) curves for the system have shown a surprising similarity between the intra- and inter-layer Si-Cu bond for each phase. Low hybridization between the Si 3s and 3p orbitals results in a low directionality of the Si-Cu bond within each of phase. The Si 3s orbitals are shown to form covalent bonds with their surrounding Cu atoms whereas the Si 3p and 3d orbitals are shown to form combinations of covalent and metallic bonds. The Si-Cu interaction is shown clearly to extend to the second layer of the alloy in deference to previous studies of Si/Cu alloys.

  14. De novo germline and postzygotic mutations in AKT3, PIK3R2 and PIK3CA cause a spectrum of related megalencephaly syndromes

    PubMed Central

    Rivière, Jean-Baptiste; Mirzaa, Ghayda M.; O’Roak, Brian J.; Beddaoui, Margaret; Alcantara, Diana; Conway, Robert L.; St-Onge, Judith; Schwartzentruber, Jeremy A.; Gripp, Karen W.; Nikkel, Sarah M.; Worthylake, Thea; Sullivan, Christopher T.; Ward, Thomas R.; Butler, Hailly E.; Kramer, Nancy A.; Albrecht, Beate; Armour, Christine M.; Armstrong, Linlea; Caluseriu, Oana; Cytrynbaum, Cheryl; Drolet, Beth A.; Innes, A. Micheil; Lauzon, Julie L.; Lin, Angela E.; Mancini, Grazia M. S.; Meschino, Wendy S.; Reggin, James D.; Saggar, Anand K.; Lerman-Sagie, Tally; Uyanik, Gökhan; Weksberg, Rosanna; Zirn, Birgit; Beaulieu, Chandree L.; Majewski, Jacek; Bulman, Dennis E.; O’Driscoll, Mark; Shendure, Jay; Graham, John M.; Boycott, Kym M.; Dobyns, William B.

    2012-01-01

    Megalencephaly-capillary malformation (MCAP) and megalencephaly-polymicrogyria-polydactyly-hydrocephalus (MPPH) syndromes are sporadic overgrowth disorders associated with markedly enlarged brain size and other recognizable features1-5. We performed exome sequencing in three families with MCAP or MPPH and confirmed our initial observations in exomes from 7 MCAP and 174 control individuals, as well as in 40 additional megalencephaly subjects using a combination of Sanger sequencing, restriction-enzyme assays, and targeted deep sequencing. We identified de novo germline or postzygotic mutations in three core components of the phosphatidylinositol-3-kinase (PI3K)/AKT pathway. These include two mutations of AKT3, one recurrent mutation of PIK3R2 in 11 unrelated MPPH families, and 15 mostly postzygotic mutations of PIK3CA in 23 MCAP and one MPPH patients. Our data highlight the central role of PI3K/AKT signaling in vascular, limb and brain development, and emphasize the power of massively parallel sequencing in a challenging context of phenotypic and genetic heterogeneity combined with postzygotic mosaicism. PMID:22729224

  15. Nucleation and growth of Ag islands on the (.sqroot.3 × .sqroot.3)R30° phase of Ag on Si(111)

    SciTech Connect

    Belianinov, A.; Unal, B.; Ho, K.-M.; Wang, C.-Z.; Evans, J. W.; Tringides, M. C.; Thiel, P. A.

    2011-06-06

    We use scanning tunneling microscopy to measure densities and characteristics of Ag islands that form on the ({radical}3 x {radical}3)R30{sup o}-Ag phase on Si(111), as a function of deposition temperature. Nucleation theory predicts that the logarithm of island density varies linearly with inverse deposition temperature. The data show two linear regimes. At 50-125 K, islands are relatively small, and island density decreases only slightly with increasing temperature. At 180-250 K, islands are larger and polycrystalline, and island density decreases strongly with increasing temperature. At 300 K, Ag atoms can travel for distances of the order of 1 {micro}m. Assuming that Ag diffusion occurs via thermally activated motion of single atoms between adjacent sites, the data can be explained as follows. At 50-125 K, the island density does not follow conventional Arrhenius scaling due to limited mobility and a consequent breakdown of the steady-state condition for the adatom density. At {approx} 115-125 K, a transition to conventional Arrhenius scaling with critical nucleus size (i = 1) begins, and at 180-250 K, i > 1 prevails. The transition points indicate a diffusion barrier of 0.20-0.23 eV and a pairwise Ag-Ag bond strength of 0.14 eV. These energy values lead to an estimate of i {approx} 3-4 in the regime 180-250 K, where island density varies strongly with temperature.

  16. Nucleation and growth of Ag islands on the (√3 × √3)R30° phase of Ag on Si(111).

    PubMed

    Belianinov, A; Unal, B; Ho, K-M; Wang, C-Z; Evans, J W; Tringides, M C; Thiel, P A

    2011-07-01

    We use scanning tunneling microscopy to measure densities and characteristics of Ag islands that form on the (√3 × √3)R30°-Ag phase on Si(111), as a function of deposition temperature. Nucleation theory predicts that the logarithm of island density varies linearly with inverse deposition temperature. The data show two linear regimes. At 50-125 K, islands are relatively small, and island density decreases only slightly with increasing temperature. At 180-250 K, islands are larger and polycrystalline, and island density decreases strongly with increasing temperature. At 300 K, Ag atoms can travel for distances of the order of 1 µm. Assuming that Ag diffusion occurs via thermally activated motion of single atoms between adjacent sites, the data can be explained as follows. At 50-125 K, the island density does not follow conventional Arrhenius scaling due to limited mobility and a consequent breakdown of the steady-state condition for the adatom density. At ∼ 115-125 K, a transition to conventional Arrhenius scaling with critical nucleus size (i = 1) begins, and at 180-250 K, i > 1 prevails. The transition points indicate a diffusion barrier of 0.20-0.23 eV and a pairwise Ag-Ag bond strength of 0.14 eV. These energy values lead to an estimate of i≈3-4 in the regime 180-250 K, where island density varies strongly with temperature.

  17. Scintillation properties and electronic structure of the intrinsic and extrinsic mixed elpasolites Cs2 Na RBr3I3 (R = La, Y)

    DOE PAGES

    Wei, Hua; Du, Mao -Hua; Stand, Luis; Zhao, Zhao; Zhuravleva, Mariya; Melcher, Charles L.; Shi, Hongliang

    2016-02-19

    Scintillators attract wide research interest for their distinct applications in radiation detection. Elpasolite halides are among the most promising scintillators due to their high structural symmetry and good scintillation performance. A better understanding of their underlying scintillation mechanism opens up possibilities in scintillator development. In this work, we employ a variety of experimental techniques to study the two mixed-anion elpasolites Cs2NaRBr3I3 (R = La, Y). The emission of intrinsic Cs2NaRBr3I3 with a light yield ranging from 20 000 to 40 000 ph / MeV is dominant by self-trapped exciton emission. Partial substitution of R with Ce introduces a competing emission,more » the Ce3+ 5d-to-4f radiative transition. Ab initio calculations are performed to investigate the electronic structures as well as the binding energies of polarons in Cs2NaRBr6. The calculated large self-trapped exciton binding energies are consistent with the observed high light yield due to self-trapped exciton (STE) emission. The unique electronic structure of halide elpasolites as calculated enhances the STE stability and the STE emission. The highly tunable scintillation properties of mixed-anion elpasolites underscore the role of their complex scintillation mechanism. Furthermore, our study provides guidance for the design of elpasolite scintillators with exceptional energy resolution and light yield desirable for applications.« less

  18. Molecular and crystal structures of 4'-hydroxy derivative of (3R,6R)-3-methyl-6-isopropyl-2-(4-phenylbenzylidene)cyclohexanone

    SciTech Connect

    Kutulya, L. A.; Kulishov, V. I.; Shishkina, S. V.; Tolochko, A. S.; Roshal', A. D.; Shishkin, O. V.

    2008-05-15

    The molecular and crystal structures of the 4-hydroxy derivative of (3R,6R)-3-methyl-6-isopropyl-2-(4-phenylbenzylidene)cyclohexanone are determined by X-ray diffraction analysis. Single crystals are orthorhombic, a = 9.147(2) A, b = 12.959(2) A, c = 15.695(5) A, V = 1860.4(7) A{sup 3}, Z = 4, and space group P2{sub 1}2{sub 1}2{sub 1}. The cyclohexanone ring in the crystal structure has an asymmetric chair conformation. The puckering parameters are as follows: the puckering amplitude S is 0.91, and the puckering angles {theta} and {psi} are equal to 20.2{sup o} and 10.4{sup o}, respectively. It is established that the enone fragment and the cyclohexanone ring in molecules are flattened considerably. In the crystal structure, the molecules are linked by the hydrogen bonds (bond length, 1.85 A). The structural features and the strength of the hydrogen bonds for the compound under investigation and its analogue with one benzene ring are compared using the X-ray diffraction and IR spectroscopic data.

  19. Magnetic, thermodynamic and transport properties of novel non-centrosymmetric RCoSi3 (R=Pr, Nd and Sm) compounds

    NASA Astrophysics Data System (ADS)

    Nallamuthu, S.; Chandrasekaran, S. Selva; Murugan, P.; Reiffers, Marian; Nagalakshmi, R.

    2016-10-01

    Novel non-centrosymmetric RCoSi3 (R = Pr, Nd and Sm) compounds crystallize in tetragonal BaNiSn3 type structure with space group I4 mm. The bulk magnetic ordering of all the compounds were confirmed from heat capacity data. Magnetization measurements indicate that PrCoSi3 orders ferromagnetically at 5.9 K, while NdCoSi3 and SmCoSi3 order antiferromagnetically at 4 K and 8 K respectively. The magnetic transitions were also manifested by the slope change of temperature dependent resistivity at low temperatures. The energy level schemes created by crystal electric field splitting are determined from Schottky contribution to specific heat. The existence of magnon gap like features at low temperatures are consistent in both heat capacity and resistivity for NdCoSi3 and SmCoSi3. Large magnetoresistance is observed in NdCoSi3 and SmCoSi3. First principles electronic structure calculation based on density functional theory framework have been performed and compared with experimental data.

  20. First sex pheromone of the order strepsiptera: (3R,5R,9R)-3,5,9-trimethyldodecanal in Stylops melittae KIRBY, 1802.

    PubMed

    Tolasch, Till; Kehl, Siegfried; Dötterl, Stefan

    2012-12-01

    The twisted-wing parasites (Strepsiptera) are an unusual and small order of insects with about 600 known species. As obligate endoparasitoids, they develop and spend most of their lives living in other insects. Adults show an extreme sexual dimorphism: The free-living males have large eyes, branched antennae, reduced forewings, and well developed hind wings, while the neotenic females of most species lack all external characters that normally define an insect, remain endoparasitic, and only extrude the cephalothorax from the host. Due to the males' short life span of only a few hours, there must be an efficient means of mate finding. This is believed to be mediated by chemical cues released by virgin females. Here, we report the first identification and synthesis of a female-produced strepsipteran sex pheromone, (3R,5R,9R)-3,5,9-trimethyldodecanal, from Stylops melittae, a species parasitizing andrenid bees. We found this highly EAD-active compound to be present in cephalothoraxes of and released from unmated females, and synthetic samples proved to be extremely attractive when offered in the field during the swarming period of the males. The structural features of this new natural compound may further support the re-establishment of the Strepsiptera as the closest living relatives of the Coleoptera. PMID:23224569