Science.gov

Sample records for 3t feasibility study

  1. New Clinically-Feasible 3-T MRI Protocol to Discriminate Internal Brain Stem Anatomy

    PubMed Central

    Hoch, Michael J.; Chung, Sohae; Ben-Eliezer, Noam; Bruno, Mary T.; Fatterpekar, Girish M.; Shepherd, Timothy M.

    2015-01-01

    Two new 3-T MRI contrast methods, track density imaging and echo modulation curve T2 mapping were combined with simultaneous multislice acquisition to reveal exquisite anatomical detail at 7 canonical levels of the brainstem. Compared to conventional MRI contrasts, many individual brainstem tracts and nuclear groups were directly visualized for the first time at 3-T. This new approach is clinically practical and feasible (total scan time = 20 min) allowing better brainstem anatomical localization and characterization. PMID:26869471

  2. Feasibility of imaging superficial palmar arch using micro-ultrasound, 7T and 3T magnetic resonance imaging

    PubMed Central

    Pruzan, Alison N; Kaufman, Audrey E; Calcagno, Claudia; Zhou, Yu; Fayad, Zahi A; Mani, Venkatesh

    2017-01-01

    AIM To demonstrate feasibility of vessel wall imaging of the superficial palmar arch using high frequency micro-ultrasound, 7T and 3T magnetic resonance imaging (MRI). METHODS Four subjects (ages 22-50 years) were scanned on a micro-ultrasound system with a 45-MHz transducer (Vevo 2100, VisualSonics). Subjects’ hands were then imaged on a 3T clinical MR scanner (Siemens Biograph MMR) using an 8-channel special purpose phased array carotid coil. Lastly, subjects’ hands were imaged on a 7T clinical MR scanner (Siemens Magnetom 7T Whole Body Scanner) using a custom built 8-channel transmit receive carotid coil. All three imaging modalities were subjectively analyzed for image quality and visualization of the vessel wall. RESULTS Results of this very preliminary study indicated that vessel wall imaging of the superficial palmar arch was feasible with a whole body 7T and 3T MRI in comparison with micro-ultrasound. Subjective analysis of image quality (1-5 scale, 1: poorest, 5: best) from B mode, ultrasound, 3T SPACE MRI and 7T SPACE MRI indicated that the image quality obtained at 7T was superior to both 3T MRI and micro-ultrasound. The 3D SPACE sequence at both 7T and 3T MRI with isotropic voxels allowed for multi-planar reformatting of images and allowed for less operator dependent results as compared to high frequency micro-ultrasound imaging. Although quantitative analysis revealed that there was no significant difference between the three methods, the 7T Tesla trended to have better visibility of the vessel and its wall. CONCLUSION Imaging of smaller arteries at the 7T is feasible for evaluating atherosclerosis burden and may be of clinical relevance in multiple diseases. PMID:28298968

  3. Master File Feasibility Study.

    ERIC Educational Resources Information Center

    Broadbent, William A.

    The three purposes for which this study was conducted involved collection and summarization of otherwise unavailable data on student characteristics and aspirations, editing and summarization of reading test data collected over the past six years, and testing of the feasibility and utility of a computerized master file combining student data…

  4. Educational Feasibility Study -- 1966.

    ERIC Educational Resources Information Center

    Hubbard, Ben C., Comp.; And Others

    By virtue of a Title III Elementary and Secondary Education Act grant, the feasibility of consolidating 7 Illinois high schools was studied. Areas of consideration were geographic characteristics, high school and elementary curriculum, and cost considerations relative to high school and elementary school buildings, curriculum, transportation,…

  5. Feasibility of prefronto-caudate pathway tractography using high resolution diffusion tensor tractography data at 3 T

    PubMed Central

    Kamali, Arash; Kramer, Larry A.; Hasan, Khader M.

    2010-01-01

    Mapping the human brain frontostriatal pathways using non-invasive diffusion tensor imaging (DTI) has been hampered by the inadequate imaging sensitivity, poor spatial resolution, lower tensor anisotropy within gray matter, increased partial volume averaging effects and poor signal-to-noise ratio. We investigated for the first time the utility of high spatial resolution DTI-based fiber-tractography using the fiber assignment by continuous tracking (FACT) to reconstruct and quantify bilaterally the prefronto-caudo-thalamic connections within the human brain at 3 T. Five healthy right-handed men (age range 24–37 years) were studied. We traced the anterior thalamic radiation and prefronto-caudo-thalamic pathways bilaterally and measured the volume of each tract and the corresponding diffusion tensor metrics in all subjects. The anterior thalamic radiation tract volume and corresponding fractional anisotropy (FA) were significantly larger bilaterally than prefronto-caudate pathway, whereas the mean diffusivity (Dav) values were similar (p > 0.7). For both anterior thalamic radiation and prefronto-caudate pathway the tract volume and corresponding DTI metrics (FA, Dav) were not significantly different between the two hemispheres (p > 0.2). Our DTI acquisition protocol and analysis permitted the reconstruction of the connectivity of the caudate with the thalamus as well as with the prefrontal cortex and allowed tracking of the whole trajectory of the prefronto-caudo-thalamic pathway. PMID:20600311

  6. A MEDLINE feasibility study.

    PubMed

    McGee, J L

    1980-07-01

    A MEDLINE feasibility study was conducted with the Northeastern Consortium for Health Information (NECHI) and sponsored by the New England Regional Medical Library Service. It is based on the theory that most potential users and supporters of MEDLINE within hospitals are unaware of its usefulness and applications, and that there exists a need for expanding MEDLINE services to more hospital libraries. The purpose of the study was to provide NECHI with an evaluation of MEDLINE as a feasible service by ascertaining the need and by evaluating the usefulness, satisfaction, and costs of the system. The study demonstrated sufficient use of MEDLINE to justify implementation within NECHI and it provided useful data to determine the future of MEDLINE in each institution. It documented that utilization improved rapidly with publicity and the presence of the system within an institution, that MEDLINE can be an effective and economical complement to the traditional reference services used to support information needs in hospitals, and that more hospital libraries should be able to implement MEDLINE to their advantage once potential users and supporters have been exposed to the system.

  7. The MRIS feasibility study

    NASA Technical Reports Server (NTRS)

    Neece, Robert T.; Cross, Aubrey E.; Schrader, James H.

    1993-01-01

    The Microwave Reflectometer Ionization Sensor (MRIS) is an instrument being developed for use in detecting and ranging of electron density layers in the reentry plasma of a space transfer vehicle. The rationale for the selection of the Double Sideband Suppressed Carrier (DSBSC) system used in the feasibility study for the MRIS is presented. A 25 GHz single-oscillator system and a 220 GHz double-oscillator system are described. The 25 GHz system was constructed and tested in the laboratory and test results are presented. As developed, the system employs a sideband spacing of 160 MHz. Based on an estimated electromagnetic wave velocity in the plasma, a round-trip phase shift measurement accuracy of +/- 7.6 degrees was required for the desired +/- 1/2 cm distance measurement accuracy. The interaction of parallel ground and reflecting planes produces interference that prevents the basic DSBSC system from meeting the accuracy goal so a frequency modulation was added to the system to allow averaging of the measured phase deviation. With an FM deviation of +/- 1 GHz, laboratory measurements were made for distances from 5 to 61 cm tip free space. Accounting for the plasma velocity factor, 82 percent of the data were equal to or better than the desired accuracy. Based on this measured result a sideband spacing to 250 MHz could be expected to yield data approximately 96 percent within the accuracy goal.

  8. Tribal Utility Feasibility Study

    SciTech Connect

    Engel, R. A.; Zoellick, J. J.

    2007-06-30

    The Schatz Energy Research Center (SERC) assisted the Yurok Tribe in investigating the feasibility of creating a permanent energy services program for the Tribe. The original purpose of the DOE grant that funded this project was to determine the feasibility of creating a full-blown Yurok Tribal electric utility to buy and sell electric power and own and maintain all electric power infrastructure on the Reservation. The original project consultant found this opportunity to be infeasible for the Tribe. When SERC took over as project consultant, we took a different approach. We explored opportunities for the Tribe to develop its own renewable energy resources for use on the Reservation and/or off-Reservation sales as a means of generating revenue for the Tribe. We also looked at ways the Tribe can provide energy services to its members and how to fund such efforts. We identified opportunities for the development of renewable energy resources and energy services on the Yurok Reservation that fall into five basic categories: • Demand-side management – This refers to efforts to reduce energy use through energy efficiency and conservation measures. • Off-grid, facility and household scale renewable energy systems – These systems can provide electricity to individual homes and Tribal facilities in areas of the Reservation that do not currently have access to the electric utility grid. • Village scale, micro-grid renewable energy systems - These are larger scale systems that can provide electricity to interconnected groups of homes and Tribal facilities in areas of the Reservation that do not have access to the conventional electric grid. This will require the development of miniature electric grids to serve these interconnected facilities. • Medium to large scale renewable energy development for sale to the grid – In areas where viable renewable energy resources exist and there is access to the conventional electric utility grid, these resources can be

  9. Wind Farm Feasibility Study

    SciTech Connect

    Richard Curry; Erik Foley; DOE Project Officer - Keith Bennett

    2007-07-11

    Saint Francis University has assessed the Swallow Farm property located in Shade Township, Somerset County, Pennsylvania as a potential wind power development site. Saint Francis worked with McLean Energy Partners to have a 50-meter meteorological tower installed on the property in April 2004 and continues to conduct a meteorological assessment of the site. Results suggest a mean average wind speed at 80 meters of 17 mph with a net capacity factor of 31 - 33%. Approximate electricity generation capacity of the project is 10 megawatts. Also, the University used matching funds provided by the federal government to contract with ABR, Inc. to conduct radar studies of nocturnal migration of birds and bats during the migrations seasons in the Spring and Fall of 2005 with a mean nocturnal flight altitude of 402 meters with less than 5% of targets at altitudes of less than 125 meters. The mean nocturnal passage rate was 166 targets/km/h in the fall and 145 targets/km/h in the spring. Lastly, University faculty and students conducted a nesting bird study May - July 2006. Seventy-three (73) species of birds were observed with 65 determined to be breeding or potentially breeding species; this figure represents approximately 30% of the 214 breeding bird species in Pennsylvania. No officially protected avian species were determined to be nesting at Swallow Farm.

  10. Conducting pilot and feasibility studies.

    PubMed

    Cope, Diane G

    2015-03-01

    Planning a well-designed research study can be tedious and laborious work. However, this process is critical and ultimately can produce valid, reliable study findings. Designing a large-scale randomized, controlled trial (RCT)-the gold standard in quantitative research-can be even more challenging. Even the most well-planned study potentially can result in issues with research procedures and design, such as recruitment, retention, or methodology. One strategy that may facilitate sound study design is the completion of a pilot or feasibility study prior to the initiation of a larger-scale trial. This article will discuss pilot and feasibility studies, their advantages and disadvantages, and implications for oncology nursing research. 
.

  11. 7 CFR 4279.150 - Feasibility studies.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 15 2014-01-01 2014-01-01 false Feasibility studies. 4279.150 Section 4279.150... § 4279.150 Feasibility studies. A feasibility study by a qualified independent consultant may be required... affect the borrower's operations. An acceptable feasibility study should include, but not be limited...

  12. 7 CFR 4279.150 - Feasibility studies.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 15 2011-01-01 2011-01-01 false Feasibility studies. 4279.150 Section 4279.150... § 4279.150 Feasibility studies. A feasibility study by a qualified independent consultant may be required... affect the borrower's operations. An acceptable feasibility study should include, but not be limited...

  13. 7 CFR 4279.150 - Feasibility studies.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 15 2013-01-01 2013-01-01 false Feasibility studies. 4279.150 Section 4279.150... § 4279.150 Feasibility studies. A feasibility study by a qualified independent consultant may be required... affect the borrower's operations. An acceptable feasibility study should include, but not be limited...

  14. 7 CFR 4279.150 - Feasibility studies.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 15 2012-01-01 2012-01-01 false Feasibility studies. 4279.150 Section 4279.150... § 4279.150 Feasibility studies. A feasibility study by a qualified independent consultant may be required... affect the borrower's operations. An acceptable feasibility study should include, but not be limited...

  15. 7 CFR 4279.150 - Feasibility studies.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 15 2010-01-01 2010-01-01 false Feasibility studies. 4279.150 Section 4279.150... § 4279.150 Feasibility studies. A feasibility study by a qualified independent consultant may be required... affect the borrower's operations. An acceptable feasibility study should include, but not be limited...

  16. Lunar Analog Feasibility Study Results

    NASA Technical Reports Server (NTRS)

    Cromwell, Ronita L.; Neigut, Joe

    2009-01-01

    This slide presentation reviews a study designed to determine the feasibility of using a 9.5 deg head-up tilt bed rest model to simulate the effects of the 1/6 g load to the human body that exists on the lunar surface. The effect of different types of compression stockings, the pre-bed rest diet, and the use of a specific exercise program were reviewed for comfort, force verification and plasma volume shift

  17. Manzanita Wind Energy Feasibility Study

    SciTech Connect

    Trisha Frank

    2004-09-30

    The Manzanita Indian Reservation is located in southeastern San Diego County, California. The Tribe has long recognized that the Reservation has an abundant wind resource that could be commercially utilized to its benefit. Manzanita has explored the wind resource potential on tribal land and developed a business plan by means of this wind energy feasibility project, which enables Manzanita to make informed decisions when considering the benefits and risks of encouraging large-scale wind power development on their lands. Technical consultant to the project has been SeaWest Consulting, LLC, an established wind power consulting company. The technical scope of the project covered the full range of feasibility assessment activities from site selection through completion of a business plan for implementation. The primary objectives of this feasibility study were to: (1) document the quality and suitability of the Manzanita Reservation as a site for installation and long-term operation of a commercially viable utility-scale wind power project; and, (2) develop a comprehensive and financeable business plan.

  18. DPC loading feasibility study report

    SciTech Connect

    Dafoe, R.E.; Lopez, D.A.; Williams, K.L.

    1997-11-01

    Disposal of radioactive wastes now stored at the Idaho Chemical Processing Plant at the Idaho National Engineering and Environmental Laboratory is mandated under a ``Settlement Agreement`` between the Department of Energy and the State of Idaho. This study investigates the feasibility of using the Dry Transfer Cell facility to package waste into Dual Purpose Canisters for interim storage at the adjacent Dry Storage System comprised of an interim storage pad with NUHOMS{reg_sign} storage modules. The wastes would then be road-ready for eventual disposal in a permanent repository. The operating period for these activities is expected to be from 2015 to 2035.

  19. Neuronal correlates of gastric pain induced by fundus distension: a 3T-fMRI study.

    PubMed

    Lu, C-L; Wu, Y-T; Yeh, T-C; Chen, L-F; Chang, F-Y; Lee, S-D; Ho, L-T; Hsieh, J-C

    2004-10-01

    Visceral hypersensitivity in gastric fundus is a possible pathogenesis for functional dyspepsia. The cortical representation of gastric fundus is still unclear. Growing evidence shows that the insula, but not the primary or secondary somatosensory region (SI or SII), may be the cortical target for visceral pain. Animal studies have also demonstrated that amygdala plays an important role in processing visceral pain. We used fMRI to study central projection of stomach pain from fundus balloon distension. We also tested the hypothesis that there will be neither S1 nor S2 activation, but amygdala activation with the fundus distension. A 3T-fMRI was performed on 10 healthy subjects during baseline, fullness (12.7 +/- 0.6 mmHg) and moderate gastric pain (17.0 +/- 0.8 mmHg). fMRI signal was modelled by convolving the predetermined psychophysical response. Statistical comparisons were performed between conditions on a group level. Gastric pain activated a wide range of cortical and subcortical structures, including thalamus and insula, anterior and posterior cingulate cortices, basal ganglia, caudate nuclei, amygdala, brain stem, cerebellum and prefrontal cortex (P < 0.001). A subset of these neuronal substrates was engaged in the central processing of fullness sensation. SI and SII were not activated during the fundus stimulation. In conclusion, the constellation of neuronal structures activated by fundus distension overlaps the pain matrices induced musculocutaneous pain, with the exception of the absence of SI or SII activation. This may account for the vague nature of visceral sensation/pain. Our data also confirms that the insula and amygdala may act as the central role in visceral sensation/pain, as well as in the proposed sensory-limbic model of learning and memory of pain.

  20. Polarized-interferometer feasibility study

    NASA Technical Reports Server (NTRS)

    Raab, F. H.

    1983-01-01

    The feasibility of using a polarized-interferometer system as a rendezvous and docking sensor for two cooperating spacecraft was studied. The polarized interferometer is a radio frequency system for long range, real time determination of relative position and attitude. Range is determined by round trip signal timing. Direction is determined by radio interferometry. Relative roll is determined from signal polarization. Each spacecraft is equipped with a transponder and an antenna array. The antenna arrays consist of four crossed dipoles that can transmit or receive either circularly or linearly polarized signals. The active spacecraft is equipped with a sophisticated transponder and makes all measurements. The transponder on the passive spacecraft is a relatively simple repeater. An initialization algorithm is developed to estimate position and attitude without any a priori information. A tracking algorithm based upon minimum variance linear estimators is also developed. Techniques to simplify the transponder on the passive spacecraft are investigated and a suitable configuration is determined. A multiple carrier CW signal format is selected. The dependence of range accuracy and ambiguity resolution error probability are derived and used to design a candidate system. The validity of the design and the feasibility of the polarized interferometer concept are verified by simulation.

  1. IPNS upgrade: A feasibility study

    SciTech Connect

    1995-04-01

    Many of Argonne National Laboratory`s (ANL`s) scientific staff members were very active in R&D work related to accelerator-based spoliation sources in the 1970s and early 1980s. In 1984, the Seitz/Eastman Panel of the National Academy of Sciences reviewed U.S. materials science research facilities. One of the recommendations of this panel was that the United States build a reactor-based steady-state source, the Advanced Neutron Source (ANS), at Oak Ridge National Laboratory. Subsequently, R&D activities related to the design of an accelerator-based source assumed a lower priority. The resumption of pulsed-source studies in this country started simultaneously with design activities in Europe aimed at the European Spallation Source (ESS). The European Community funded a workshop in September 1991 to define the parameters of the ESS. Participants in this workshop included both accelerator builders and neutron source users. A consortium of European countries has proposed to build a 5-MW pulsed source, and a feasibility study is currently under way. Soon after the birth of the ESS, a small group at ANL set about bringing themselves up to date on pulsed-source information since 1984 and studied the feasibility of upgrading ANL`s Intense Pulsed Neutron Source (IPNS) to 1 MW by means of a rapidly cycling synchrotron that could be housed, along with its support facilities, in existing buildings. In early 1993, the Kohn panel recommended that (1) design and construction of the ANS should be completed according to the proposed project schedule and (2) development of competitive proposals for cost-effective design and construction of a 1-MW pulsed spallation source should be authorized immediately.

  2. 25 CFR 41.7 - Feasibility studies.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 25 Indians 1 2013-04-01 2013-04-01 false Feasibility studies. 41.7 Section 41.7 Indians BUREAU OF... NAVAJO COMMUNITY COLLEGE Tribally Controlled Community Colleges § 41.7 Feasibility studies. (a) Grants... initiate a feasibility study to determine whether there is justification to encourage and maintain...

  3. 7 CFR 4279.250 - Feasibility studies.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 15 2013-01-01 2013-01-01 false Feasibility studies. 4279.250 Section 4279.250... § 4279.250 Feasibility studies. The provisions of § 4279.150 do not apply to this subpart. Instead, feasibility studies must meet the requirements specified in § 4279.261(f)....

  4. 25 CFR 41.7 - Feasibility studies.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 25 Indians 1 2011-04-01 2011-04-01 false Feasibility studies. 41.7 Section 41.7 Indians BUREAU OF... NAVAJO COMMUNITY COLLEGE Tribally Controlled Community Colleges § 41.7 Feasibility studies. (a) Grants... initiate a feasibility study to determine whether there is justification to encourage and maintain...

  5. 7 CFR 4279.250 - Feasibility studies.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 15 2014-01-01 2014-01-01 false Feasibility studies. 4279.250 Section 4279.250... § 4279.250 Feasibility studies. The provisions of § 4279.150 do not apply to this subpart. Instead, feasibility studies must meet the requirements specified in § 4279.261(f)....

  6. 7 CFR 4279.250 - Feasibility studies.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 15 2012-01-01 2012-01-01 false Feasibility studies. 4279.250 Section 4279.250... § 4279.250 Feasibility studies. The provisions of § 4279.150 do not apply to this subpart. Instead, feasibility studies must meet the requirements specified in § 4279.261(f)....

  7. 25 CFR 41.7 - Feasibility studies.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 25 Indians 1 2012-04-01 2011-04-01 true Feasibility studies. 41.7 Section 41.7 Indians BUREAU OF... NAVAJO COMMUNITY COLLEGE Tribally Controlled Community Colleges § 41.7 Feasibility studies. (a) Grants... initiate a feasibility study to determine whether there is justification to encourage and maintain...

  8. 25 CFR 41.7 - Feasibility studies.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 25 Indians 1 2010-04-01 2010-04-01 false Feasibility studies. 41.7 Section 41.7 Indians BUREAU OF... NAVAJO COMMUNITY COLLEGE Tribally Controlled Community Colleges § 41.7 Feasibility studies. (a) Grants... initiate a feasibility study to determine whether there is justification to encourage and maintain...

  9. Photoacoustic biopsy: a feasibility study

    NASA Astrophysics Data System (ADS)

    Xu, Guan; Tomlins, Scott A.; Siddiqui, Javed; Davis, Mandy A.; Kunju, Lakshmi P.; Wei, John T.; Wang, Xueding

    2015-03-01

    Photoacoustic (PA) measurements encode the information associated with both physical microstructures and chemical contents in biological tissues. A two-dimensional physio-chemical spectrogram (PCS) can be formulated by combining the power spectra of PA signals acquired at a series of optical wavelengths. The analysis of PCS, or namely PA physio-chemical analysis (PAPCA), enables the quantification of the concentrations and the spatial distributions of a variety of chemical components in the tissue. The chemical components and their distribution are the two major features observed in the biopsy procedures which have been regarded as the gold standard of the diagnosis of many diseases. Taking non-alcoholic fatty liver disease and prostate cancer for example, this study investigates the feasibility of PAPCA in characterizing the histopathological changes in the diseased conditions in biological tissue. A catheter based setup facilitating measurement in deep tissues was also proposed and tested.

  10. Muon muon collider: Feasibility study

    SciTech Connect

    1996-06-18

    A feasibility study is presented of a 2 + 2 TeV muon collider with a luminosity of L = 10{sup 35} cm{sup {minus}2} s{sup {minus}1}. The resulting design is not optimized for performance, and certainly not for cost; however, it does suffice--the authors believe--to allow them to make a credible case, that a muon collider is a serious possibility for particle physics and, therefore, worthy of R and D support so that the reality of, and interest in, a muon collider can be better assayed. The goal of this support would be to completely assess the physics potential and to evaluate the cost and development of the necessary technology. The muon collider complex consists of components which first produce copious pions, then capture the pions and the resulting muons from their decay; this is followed by an ionization cooling channel to reduce the longitudinal and transverse emittance of the muon beam. The next stage is to accelerate the muons and, finally, inject them into a collider ring which has a small beta function at the colliding point. This is the first attempt at a point design and it will require further study and optimization. Experimental work will be needed to verify the validity of diverse crucial elements in the design.

  11. Beluga coal gasification feasibility study

    SciTech Connect

    Robert Chaney; Lawrence Van Bibber

    2006-07-15

    The objective of the study was to determine the economic feasibility of developing and siting a coal-based integrated gasification combined-cycle (IGCC) plant in the Cook Inlet region of Alaska for the co-production of electric power and marketable by-products. The by-products, which may include synthesis gas, Fischer-Tropsch (F-T) liquids, fertilizers such as ammonia and urea, alcohols, hydrogen, nitrogen and carbon dioxide, would be manufactured for local use or for sale in domestic and foreign markets. This report for Phase 1 summarizes the investigation of an IGCC system for a specific industrial setting on the Cook Inlet, the Agrium U.S. Inc. ('Agrium') fertilizer plant in Nikiski, Alaska. Faced with an increase in natural gas price and a decrease in supply, the Agrium is investigating alternatives to gas as feed stock for their plant. This study considered all aspects of the installation and infrastructure, including: coal supply and cost, coal transport costs, delivery routes, feedstock production for fertilizer manufacture, plant steam and power, carbon dioxide (CO{sub 2}) uses, markets for possible additional products, and environmental permit requirements. The Cook Inlet-specific Phase 1 results, reported here, provided insight and information that led to the conclusion that the second study should be for an F-T plant sited at the Usibelli Coal Mine near Healy, Alaska. This Phase 1 case study is for a very specific IGCC system tailored to fit the chemical and energy needs of the fertilizer manufacturing plant. It demonstrates the flexibility of IGCC for a variety of fuel feedstocks depending on plant location and fuel availability, as well as the available variety of gas separation, gas cleanup, and power and steam generation technologies to fit specific site needs. 18 figs., 37 tabs., 6 apps.

  12. Asteroid Return Mission Feasibility Study

    NASA Technical Reports Server (NTRS)

    Brophy, John R.; Gershman, Robert; Landau, Damon; Polk, James; Porter, Chris; Yeomans, Don; Allen, Carlton; Williams, Willie; Asphaug, Erik

    2011-01-01

    This paper describes an investigation into the technological feasibility of finding, characterizing, robotically capturing, and returning an entire Near-Earth Asteroid (NEA) to the International Space Station (ISS) for scientific investigation, evaluation of its resource potential, determination of its internal structure and other aspects important for planetary defense activities, and to serve as a testbed for human operations in the vicinity of an asteroid. Reasonable projections suggest that several dozen candidates NEAs in the size range of interest (approximately 2-m diameter) will be known before the end of the decade from which a suitable target could be selected. The conceptual mission objective is to return an approximately 10,000-kg asteroid to the ISS in a total flight time of approximately 5 years using a single Evolved Expendable Launch Vehicle. Preliminary calculations indicate that this could be accomplished using a solar electric propulsion (SEP) system with high-power Hall thrusters and a maximum power into the propulsion system of approximately 40 kW. The SEP system would be used to provide all of the post-launch delta V. The asteroid would have an unrestricted Earth return Planetary Protection categorization, and would be curated at the ISS where numerous scientific and resource utilization experiments would be conducted. Asteroid material brought to the ground would be curated at the NASA Johnson Space Center. This preliminary study identified several areas where additional work is required, but no show stoppers were identified for the approach that would return an entire 10,000-kg asteroid to the ISS in a mission that could be launched by the end of this decade.

  13. Dual-Doppler Feasibility Study

    NASA Technical Reports Server (NTRS)

    Huddleston, Lisa L.

    2012-01-01

    When two or more Doppler weather radar systems are monitoring the same region, the Doppler velocities can be combined to form a three-dimensional (3-D) wind vector field thus providing for a more intuitive analysis of the wind field. A real-time display of the 3-D winds can assist forecasters in predicting the onset of convection and severe weather. The data can also be used to initialize local numerical weather prediction models. Two operational Doppler Radar systems are in the vicinity of Kennedy Space Center (KSC) and Cape Canaveral Air Force Station (CCAFS); these systems are operated by the 45th Space Wing (45 SW) and the National Weather Service Melbourne, Fla. (NWS MLB). Dual-Doppler applications were considered by the 45 SW in choosing the site for the new radar. Accordingly, the 45th Weather Squadron (45 WS), NWS MLB and the National Aeronautics and Space Administration tasked the Applied Meteorology Unit (AMU) to investigate the feasibility of establishing dual-Doppler capability using the two existing systems. This study investigated technical, hardware, and software requirements necessary to enable the establishment of a dual-Doppler capability. Review of the available literature pertaining to the dual-Doppler technique and consultation with experts revealed that the physical locations and resulting beam crossing angles of the 45 SW and NWS MLB radars make them ideally suited for a dual-Doppler capability. The dual-Doppler equations were derived to facilitate complete understanding of dual-Doppler synthesis; to determine the technical information requirements; and to determine the components of wind velocity from the equation of continuity and radial velocity data collected by the two Doppler radars. Analysis confirmed the suitability of the existing systems to provide the desired capability. In addition, it is possible that both 45 SW radar data and Terminal Doppler Weather Radar data from Orlando International Airport could be used to alleviate any

  14. Multnomah County Hydrokinetic Feasibility Study: Final Feasibility Study Report

    SciTech Connect

    Spain, Stephen

    2012-03-15

    HDR has completed a study of the technical, regulatory, and economic feasibility of installing hydrokinetic turbines under the Morrison, Broadway, and Sellwood bridges. The primary objective of installing hydrokinetic turbines is a demonstration of in-stream hydrokinetic technologies for public education and outreach. Due to the low gradient of the Lower Willamette and the effects of the tide, velocities in the area in consideration are simply not high enough to economically support a commercial installation. While the velocities in the river may at times provide enough energy for a commercial turbine to reach capacity, the frequency and duration of high flow events which provide suitable velocities is not sufficient to support a commercial hydrokinetic installation. We have observed that over an 11 year period, daily average velocities in the Lower Willamette exceeded a nominal cut-in speed of 0.75 m/s only 20% of the time, leaving net zero power production for the remaining 80% of days. The Sellwood Bridge site was estimated to have the best hydrokinetic resource, with an estimated average annual production of about 9,000 kWh. The estimated production could range from 2,500 kWh to 15,000 kWh. Based on these energy estimates, the amount of revenue generated through either a power purchase agreement (PPA) or recovered through net metering is not sufficient to repay the project costs within the life of the turbine. The hydrokinetic resource at the Morrison and Broadway Bridges is slightly smaller than at the Sellwood Bridge. While the Broadway and Morrison Bridges have existing infrastructure that could be utilized, the project is not expected to generate enough revenue to repay the investment. Despite low velocities and energy production, the sites themselves are favorable for installation of a demonstration or experimental project. With high public interest in renewable energy, the possibility exists to develop a hydrokinetic test site which could provide

  15. 7 CFR 1980.442 - Feasibility studies.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 14 2013-01-01 2013-01-01 false Feasibility studies. 1980.442 Section 1980.442... studies. A feasibility study by a recognized independent consultant will be required for all loans, except as provided in this paragraph. The cost of the study will be borne by the borrower and may be...

  16. Cashless Ships: A Feasibility Study

    DTIC Science & Technology

    1997-09-01

    with a cashless network providing real time accounting and banking applications. This research verifies the feasibility of cashless network systems...aboard ships with cashless mechanisms. The motivation for this research is to provide and ensure monetary freedom to sailors at sea. This research...verifies seamless integration with cashless processes available commercially. A review is conducted of the existing shipboard cash systems. Then, the

  17. WERF MACT Feasibility Study Report

    SciTech Connect

    B. Bonnema; D. Moser; J. Riedesel; K. Kooda; K. Liekhus; K. Rebish; S. Poling

    1998-11-01

    This study was undertaken to determine the technical feasibility of upgrading the Waste Experimental Reduction Facility (WERF) at the Idaho National Engineering and Environmental Laboratory to meet the offgas emission limits proposed in the Maximum Achievable Control Technologies (MACT)rule. Four practicable offgas treatment processes were identified, which, if installed, would enable the WERF to meet the anticipated MACT emission limits for dioxins and furans (D/F), hydrochloric acid (HCI), and mercury (Hg). Due to the three-year time restraint for MACT compliance, any technology chosen for the upgrade must be performed within the general plant project funding limit of $5 M. The option selected consists of a partial-quench evaporative cooler with dry sorbent injection for HCI removal followed by a sulfur-impregnated activated carbon bed for Hg control. The planning cost estimate for implementing the option is $4.17 M (with 24% contingency). The total estimated cost includes capital costs, design and construction costs, and project management costs. Capital costs include the purchase of a new offgas evaporative cooler, a dry sorbent injection system with reagent storage, a new fabric filter baghouse, a fixed carbon bed absorber, and two offgas induced draft exhaust fans. It is estimated that 21 months will be required to complete the recommended modification to the WERF. The partial-quench cooler is designed to rapidly cool the offgas exiting the secondary combustion chamber to minimize D/F formation. Dry sorbent injection of an alkali reagent into the offgas is recommended. The alkali reacts with the HCI to form a salt, which is captured with the fly ash in the baghouse. A design HCI removal efficiency of 97.2% allows for the feeding 20 lbs/hr of chlorine to the WERF incinerator. The sorbent feed rate can be adjusted to achieve the desired HCI removal efficiency. A fixed bed of sulfur-impregnated carbon was conservatively sized for a total Hg removal capacity when

  18. Association between the XRCC3 T241M polymorphism and risk of cancer: evidence from 157 case-control studies.

    PubMed

    He, Xiao-Feng; Wei, Wu; Li, Jia-Lin; Shen, Xu-Liang; Ding, Da-peng; Wang, Su-Lan; Liu, Zhi-Zhong; Qin, Jiang-Bo; Wu, Li-Xia; Xie, Dao-Lin

    2013-07-01

    The T241M polymorphism in the X-ray cross-complementing group 3 (XRCC3) had been implicated in cancer susceptibility. The previous published data on the association between XRCC3 T241M polymorphism and cancer risk remained controversial. Hence, we performed a meta-analysis to investigate the association between cancer susceptibility and XRCC3 T241M (61,861 cases and 84,584 controls from 157 studies) polymorphism in different inheritance models. We used odds ratios with 95% confidence intervals to assess the strength of the association. Overall, significantly increased cancer risk was observed in any genetic model (dominant model: odds ration [OR]=1.07, 95% confidence interval [CI]=1.00-1.13; recessive model: OR=1.15, 95% CI=1.08-1.23; additive model: OR=1.17, 95% CI=1.08-1.28) when all eligible studies were pooled into the meta-analysis. In further stratified and sensitivity analyses, the elevated risk remained for subgroups of bladder cancer and breast cancer, especially in Caucasians. In addition, significantly decreased lung cancer risk was also observed. In summary, this meta-analysis suggests the participation of XRCC3 T241M in the susceptibility for bladder cancer and breast cancer, especially in Caucasians, and XRCC3 T241M polymorphism is associated with decreased lung cancer risk. Moreover, our work also points out the importance of new studies for T241M association in some cancer types, such as gastric cancer, colorectal cancer, and melanoma skin cancer, where at least some of the covariates responsible for heterogeneity could be controlled, to obtain a more conclusive understanding about the function of the XRCC3 polymorphism in cancer development.

  19. Renewable Energy System Feasibility Study

    DTIC Science & Technology

    1982-08-01

    estimate of economic feasibility. The machines, representing a wide range of rated output, were: Aerowat 4.1 kw, Millville 10 kw, Jay Carter 25 kw...Mehrkam 100 kw 2" Jay Carter 25 kw Aerowatt 4.1 kw Millville 10 kw 22 01 04 07 10 13 16 19 22 Time of Day Figure B-1. Average Expected Power 74 20 /18 1...Mehrkam 225 kw 16 152 13i :3 0 S 10- 0 9- o " 8 4Mehrkam 100 kw> 7 6 5 4 13 Jay Carter 25 k, 2 Aerowatt 4.1 kw l Millville 10 kw JAN FEB MAR APR MAY

  20. Sault Tribe Wind Energy Feasibility Study

    SciTech Connect

    Toni Osterhout; Global Energy Concepts

    2005-07-31

    The Sault Tribe conducted a feasibility study on tribal lands in the Upper Peninsula of Michigan to determine the technical and economic feasibility of both small and large-scale wind power development on tribal lands. The study included a wind resource assessment, transmission system analysis, engineering and regulatory analyzes and assessments.

  1. Muon Muon Collider: Feasibility Study

    SciTech Connect

    Gallardo, J.C.; Palmer, R.B.; Tollestrup, A.V.; Sessler, A.M.; Skrinsky, A.N.; Ankenbrandt, C.; Geer, S.; Griffin, J.; Johnstone, C.; Lebrun, P.; McInturff, A.; Mills, Frederick E.; Mokhov, N.; Moretti, A.; Neuffer, D.; Ng, K.Y.; Noble, R.; Novitski, I.; Popovic, M.; Qian, C.; Van Ginneken, A. /Fermilab /Brookhaven /Wisconsin U., Madison /Tel Aviv U. /Indiana U. /UCLA /LBL, Berkeley /SLAC /Argonne /Sobolev IM, Novosibirsk /UC, Davis /Munich, Tech. U. /Virginia U. /KEK, Tsukuba /DESY /Novosibirsk, IYF /Jefferson Lab /Mississippi U. /SUNY, Stony Brook /MIT /Columbia U. /Fairfield U. /UC, Berkeley

    2012-04-05

    A feasibility study is presented of a 2 + 2 TeV muon collider with a luminosity of L = 10{sup 35} cm{sup -2}s{sup -1}. The resulting design is not optimized for performance, and certainly not for cost; however, it does suffice - we believe - to allow us to make a credible case, that a muon collider is a serious possibility for particle physics and, therefore, worthy of R and D support so that the reality of, and interest in, a muon collider can be better assayed. The goal of this support would be to completely assess the physics potential and to evaluate the cost and development of the necessary technology. The muon collider complex consists of components which first produce copious pions, then capture the pions and the resulting muons from their decay; this is followed by an ionization cooling channel to reduce the longitudinal and transverse emittance of the muon beam. The next stage is to accelerate the muons and, finally, inject them into a collider ring wich has a small beta function at the colliding point. This is the first attempt at a point design and it will require further study and optimization. Experimental work will be needed to verify the validity of diverse crucial elements in the design. Muons because of their large mass compared to an electron, do not produce significant synchrotron radiation. As a result there is negligible beamstrahlung and high energy collisions are not limited by this phenomena. In addition, muons can be accelerated in circular devices which will be considerably smaller than two full-energy linacs as required in an e{sup +} - e{sup -} collider. A hadron collider would require a CM energy 5 to 10 times higher than 4 TeV to have an equivalent energy reach. Since the accelerator size is limited by the strength of bending magnets, the hadron collider for the same physics reach would have to be much larger than the muon collider. In addition, muon collisions should be cleaner than hadron collisions. There are many detailed particle

  2. Corpus Refactoring: a Feasibility Study

    PubMed Central

    Johnson, Helen L; Baumgartner, William A; Krallinger, Martin; Cohen, K Bretonnel; Hunter, Lawrence

    2007-01-01

    Background Most biomedical corpora have not been used outside of the lab that created them, despite the fact that the availability of the gold-standard evaluation data that they provide is one of the rate-limiting factors for the progress of biomedical text mining. Data suggest that one major factor affecting the use of a corpus outside of its home laboratory is the format in which it is distributed. This paper tests the hypothesis that corpus refactoring – changing the format of a corpus without altering its semantics – is a feasible goal, namely that it can be accomplished with a semi-automatable process and in a time-effcient way. We used simple text processing methods and limited human validation to convert the Protein Design Group corpus into two new formats: WordFreak and embedded XML. We tracked the total time expended and the success rates of the automated steps. Results The refactored corpus is available for download at the BioNLP SourceForge website http://bionlp.sourceforge.net. The total time expended was just over three person-weeks, consisting of about 102 hours of programming time (much of which is one-time development cost) and 20 hours of manual validation of automatic outputs. Additionally, the steps required to refactor any corpus are presented. Conclusion We conclude that refactoring of publicly available corpora is a technically and economically feasible method for increasing the usage of data already available for evaluating biomedical language processing systems. PMID:17854502

  3. Preliminary guided rocket feasibility study

    NASA Technical Reports Server (NTRS)

    Nolan, M. B.; Celmer, J. J.

    1973-01-01

    The feasibility of actively guiding sounding rockets to reduce impact dispersion has been investigated. The theoretical probability of range safety thrust termination for several high performance rockets was combined with the cost of acquiring the extended range at White Sands Missile Range (WSMR) to establish a guidance system price ceiling of $20K per flight. Guiding the Black Brant VC (BBVC) for the first five seconds of flight results in sufficient dispersion reduction to impact within the standard range boundaries at WSMR. The guidance system thrust level required to statically control the vehicle to a nominal-wind weighted trajectory for five seconds is between 150-200 pounds. A six-degree-of-freedom trajectory program with guidance simulation capability has been developed and the equations are presented.

  4. Nuts and bolts of conducting feasibility studies.

    PubMed

    Tickle-Degnen, Linda

    2013-01-01

    Many factors can affect the successful implementation and validity of intervention studies. A primary purpose of feasibility and pilot studies is to assess the potential for successful implementation of the proposed main intervention studies and to reduce threats to the validity of these studies. This article describes a typology to guide the aims of feasibility and pilot studies designed to support the development of randomized controlled trials and provides an example of the studies underlying the development of one rehabilitation trial. The purpose of most feasibility and pilot studies should be to describe information and evidence related to the successful implementation and validity of a planned main trial. Null hypothesis significance testing is not appropriate for these studies unless the sample size is properly powered. The primary tests of the intervention effectiveness hypotheses should occur in the main study, not in the studies that are serving as feasibility or pilot studies.

  5. Ecological feasibility studies in restoration decision making.

    PubMed

    Hopfensperger, Kristine N; Engelhardt, Katharina A M; Seagle, Steven W

    2007-06-01

    The restoration of degraded systems is essential for maintaining the provision of valuable ecosystem services, including the maintenance of aesthetic values. However, restoration projects often fail to reach desired goals for a variety of ecologic, financial, and social reasons. Feasibility studies that evaluate whether a restoration effort should even be attempted can enhance restoration success by highlighting potential pitfalls and gaps in knowledge before the design phase of a restoration. Feasibility studies also can bring stakeholders together before a restoration project is designed to discuss potential disagreements. For these reasons, a feasibility study was conducted to evaluate the efficacy of restoring a tidal freshwater marsh in the Potomac River near Alexandria, Virginia. The study focused on science rather than engineering questions, and thus differed in approach from other feasibility studies that are mostly engineering driven. The authors report the framework they used to conduct a feasibility study to inform other potential restoration projects with similar goals. The seven steps of the framework encompass (1) initiation of a feasibility study, (2) compilation of existing data, (3) collection of current site information, (4) examination of case studies, (5) synthesis of information in a handbook, (6) meeting with selected stakeholders, and (7) evaluation of meeting outcomes. By conducting a feasibility study using the seven-step framework, the authors set the stage for conducting future compliance studies and enhancing the chance of a successful restoration.

  6. Lunar surface mine feasibility study

    NASA Astrophysics Data System (ADS)

    Blair, Brad R.

    This paper describes a lunar surface mine, and demonstrates the economic feasibility of mining oxygen from the moon. The mine will be at the Apollo 16 landing site. Mine design issues include pit size and shape, excavation equipment, muck transport, and processing requirements. The final mine design will be driven by production requirements, and constrained by the lunar environment. This mining scenario assumes the presence of an operating lunar base. Lunar base personnel will set-up a and run the mine. The goal of producing lunar oxygen is to reduce dependence on fuel shipped from Earth. Thus, the lunar base is the customer for the finished product. The perspective of this paper is that of a mining contractor who must produce a specific product at a remote location, pay local labor, and sell the product to an onsite captive market. To make a profit, it must be less costly to build and ship specialized equipment to the site, and pay high labor and operating costs, than to export the product directly to the site.

  7. Three Affliated Tribes Renewable Energy Feasibility Study

    SciTech Connect

    Belvin Pete; Kent Good; Krista Gordon; Ed McCarthy,

    2006-05-26

    The Three Affliated Tribes on the Fort Berthold Reservation studied the feasibility of a commercial wind facility on land selected and owned by the Tribes and examined the potential for the development of renewable energy resources on Tribal Lands.

  8. Conceptual Thermal Treatment Technologies Feasibility Study

    SciTech Connect

    Suer, A.

    1996-02-28

    This report presents a conceptual Thermal Treatment Technologies Feasibility Study (FS) for the Savannah River Site (SRS) focusing exclusively on thermal treatment technologies for contaminated soil, sediment, or sludge remediation projects.

  9. Physiological brainstem mechanisms of trigeminal nociception: An fMRI study at 3T.

    PubMed

    Schulte, Laura H; Sprenger, Christian; May, Arne

    2016-01-01

    The brainstem is a major site of processing and modulation of nociceptive input and plays a key role in the pathophysiology of various headache disorders. However, human imaging studies on brainstem function following trigeminal nociceptive stimulation are scarce as brainstem specific imaging approaches have to address multiple challenges such as magnetic field inhomogeneities and an enhanced level of physiological noise. In this study we used a viable protocol for brainstem fMRI of standardized trigeminal nociceptive stimulation to achieve detailed insight into physiological brainstem mechanisms of trigeminal nociception. We conducted a study of 21 healthy participants using a nociceptive ammonia stimulation of the left nasal mucosa with an optimized MR acquisition protocol for high resolution brainstem echoplanar imaging in combination with two different noise correction techniques. Significant BOLD responses to noxious ammonia stimulation were observed in areas typically involved in trigeminal nociceptive processing such as the spinal trigeminal nuclei (sTN), thalamus, secondary somatosensory cortex, insular cortex and cerebellum as well as in a pain modulating network including the periaqueductal gray area, hypothalamus (HT), locus coeruleus and cuneiform nucleus (CNF). Activations of the left CNF were positively correlated with pain intensity ratings. Employing psychophysiological interaction (PPI) analysis we found enhanced functional connectivity of the sTN with the contralateral sTN and HT following trigeminal nociception. We also observed enhanced functional connectivity of the CNF with the RVM during painful stimulation thus implying an important role of these two brainstem regions in central pain processing. The chosen approach to study trigeminal nociception with high-resolution fMRI offers new insight into human pain processing and might thus lead to a better understanding of headache pathophysiology.

  10. White Earth Biomass/Biogas Feasibility Study

    SciTech Connect

    Triplett, Michael

    2015-03-12

    The White Earth Nation examined the feasibility of cost savings and fossil energy reduction through the installation of biogas/biomass boiler at the tribal casino. The study rejected biogas options due to availability and site constraints, but found a favorable environment for technical and financial feasibility of installing a 5 MMBtu hot water boiler system to offset 60-70 percent of current fuel oil and propane usage.

  11. Marketing FE. A Feasibility Study.

    ERIC Educational Resources Information Center

    HR & H Marketing Research International, Ltd., London (England).

    A study evaluated procedures currently used to market adult education at five colleges in Great Britain. Data were collected from roundtable discussions with the principals and vice-principals of the five participating colleges and from interviews and questionnaires administered to staff members from each college and to representatives of…

  12. FEASIBILITY STUDY OF CLIMATE CHANGE IMPACTS ON ...

    EPA Pesticide Factsheets

    The objective of this study is to explore the feasibility of studying potential effects of climate change on impairments resulting from nitrogen loadings in the salt water embayments of Cape Cod. The report includes a recommended plan for studying these impacts, an estimate of the costs and level of effort required; a tally of data, information, and modeling requirements; an assessment of the strengths and weaknesses of the plan; and recommendations for the appropriate use of results. Study to determine feasibility of studying climate change effects on nitrogen impaired estuarine embayments

  13. 78 FR 57624 - Availability of a Draft Integrated Feasibility Report (Feasibility Study/Environmental Impact...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-09-19

    ... Feasibility Report (IFR), which includes a Draft Feasibility Study (FS) and Environmental Impact Statement... Department of the Army; Corps of Engineers Availability of a Draft Integrated Feasibility Report (Feasibility Study/Environmental Impact Statement/Environmental Impact Report), Los Angeles River...

  14. Satellite animal tracking feasibility studies

    NASA Technical Reports Server (NTRS)

    Buechner, H. K.

    1975-01-01

    A study was initiated in Tsavo National Park to determine movements and home ranges of individual elephants and their relations to overall distribution patterns and environmental factors such as rainfall. Methods used were radio tracking and observations of visually identifiable individuals. Aerial counts provided data on overall distribution. Two bulls and two cows were radio-tagged in Tsavo West and two bulls and four cows in Tsavo East, providing home range and movement data. The movements of individuals were useful in interpreting relatively major shifts in elephant distribution. Results point to the following preliminary conclusions: (1) elephants in the Tsavo area undertook long distance movements in fairly direct response to localized rainfall; (2) a subdivision of the overall population into locally distinct units may exist during the dry season but did not occur after significant rainfall; and (3) food appears to be the primary factor governing movements and distribution of elephants in the area.

  15. Potential Heating Effect in the Gravid Uterus by Using 3-T MR Imaging Protocols: Experimental Study in Miniature Pigs.

    PubMed

    Cannie, Mieke M; De Keyzer, Frederik; Van Laere, Sigrid; Leus, Astrid; de Mey, Johan; Fourneau, Catherine; De Ridder, Filip; Van Cauteren, Toon; Willekens, Inneke; Jani, Jacques C

    2016-06-01

    Purpose To determine the changes in temperature within the gravid miniature pig uterus during magnetic resonance (MR) imaging at 3 T. Materials and Methods The study received ethics committee approval for animal experimentation. Fiber-optic temperature sensors were inserted into the fetal brain, abdomen, bladder, and amniotic fluid of miniature pigs (second trimester, n = 2; third trimester, n = 2). In the first trimester (n = 2), the sensors were inserted only into the amniotic fluid (three sacs per miniature pig, for a total of six sacs). Imaging was performed with a 3-T MR imager by using different imaging protocols in a random order for animal, each lasting approximately 15 minutes. The first regimen consisted of common sequences used for human fetal MR examination, including normal specific absorption rate (SAR). The second regimen consisted of five low-SAR sequences, for which three gradient-echo sequences were interspersed with two diffusion-weighted imaging series. Finally, a high-SAR regimen maximized the radiofrequency energy deposition (constrained by the 2-W per kilogram of body weight SAR limitations) by using five single-shot turbo spin-echo sequences. Differences in temperature increases between the three regimens and between the three trimesters were evaluated by using one-way analysis of variance. The maximum cumulative temperature increase over 1 hour was also evaluated. Results Low-SAR regimens resulted in the lowest temperature increase (mean ± standard deviation, -0.03°C ± 0.20), normal regimens resulted in an intermediate increase (0.31°C ± 0.21), and high-SAR regimens resulted in the highest increase (0.56°C ± 0.20) (P < .0001). Mean temperature increase in the third trimester was 0.38°C ± 0.27, with no significant differences compared with the first (0.23°C ± 0.27) and second (0.25°C ± 0.32) trimesters (P = .07). The cumulative temperature increase over 1-hour imaging time with high SAR can reach 2.5°C. Conclusion In pregnant

  16. Geothermal feasibility study for Malting Investments Inc

    SciTech Connect

    Not Available

    1981-10-01

    The engineering feasibility of using geothermal heat in the kilning, germination, and steep water cooling processes for a malting facility is determined. The study is based upon a malting facility with an annual capacity of malting three million bushels of clean graded barley per year or 8220 bushels per day. Capital cost figures used in the feasibility study are budget prices for the basic equipment only, they do not include any other costs such as installation, instrumentation or design and engineering costs. Utility prices are based upon $0.03 per kilowatt hour and $0.4548 per therm for natural gas.

  17. Artemis: Results of the engineering feasibility study

    NASA Technical Reports Server (NTRS)

    1991-01-01

    Information is given in viewgraph form for the Engineering Feasibility Study of the Artemis Project, a plan to establish a permanent base on the Moon. Topics covered include the Common Lunar Lander (CLL), lunar lander engineering study results, lunar lander trajectory analysis, lunar lander conceptual design and mass properties, the lunar lander communication subsystem design, and product assurance.

  18. Children's Fitness Testing: A Feasibility Study

    ERIC Educational Resources Information Center

    Harris, J.; Cale, L.

    2007-01-01

    Objective: This study aimed to determine whether it was necessary, cost effective and practical to investigate Welsh children's fitness levels in order to promote active, healthy lifestyles. Design: A multi-method study comprising a comprehensive review of literature, a questionnaire survey and interviews. Setting: This was a feasibility study…

  19. Brain morphometry reproducibility in multi-center 3T MRI studies: a comparison of cross-sectional and longitudinal segmentations.

    PubMed

    Jovicich, Jorge; Marizzoni, Moira; Sala-Llonch, Roser; Bosch, Beatriz; Bartrés-Faz, David; Arnold, Jennifer; Benninghoff, Jens; Wiltfang, Jens; Roccatagliata, Luca; Nobili, Flavio; Hensch, Tilman; Tränkner, Anja; Schönknecht, Peter; Leroy, Melanie; Lopes, Renaud; Bordet, Régis; Chanoine, Valérie; Ranjeva, Jean-Philippe; Didic, Mira; Gros-Dagnac, Hélène; Payoux, Pierre; Zoccatelli, Giada; Alessandrini, Franco; Beltramello, Alberto; Bargalló, Núria; Blin, Olivier; Frisoni, Giovanni B

    2013-12-01

    Large-scale longitudinal multi-site MRI brain morphometry studies are becoming increasingly crucial to characterize both normal and clinical population groups using fully automated segmentation tools. The test-retest reproducibility of morphometry data acquired across multiple scanning sessions, and for different MR vendors, is an important reliability indicator since it defines the sensitivity of a protocol to detect longitudinal effects in a consortium. There is very limited knowledge about how across-session reliability of morphometry estimates might be affected by different 3T MRI systems. Moreover, there is a need for optimal acquisition and analysis protocols in order to reduce sample sizes. A recent study has shown that the longitudinal FreeSurfer segmentation offers improved within session test-retest reproducibility relative to the cross-sectional segmentation at one 3T site using a nonstandard multi-echo MPRAGE sequence. In this study we implement a multi-site 3T MRI morphometry protocol based on vendor provided T1 structural sequences from different vendors (3D MPRAGE on Siemens and Philips, 3D IR-SPGR on GE) implemented in 8 sites located in 4 European countries. The protocols used mild acceleration factors (1.5-2) when possible. We acquired across-session test-retest structural data of a group of healthy elderly subjects (5 subjects per site) and compared the across-session reproducibility of two full-brain automated segmentation methods based on either longitudinal or cross-sectional FreeSurfer processing. The segmentations include cortical thickness, intracranial, ventricle and subcortical volumes. Reproducibility is evaluated as absolute changes relative to the mean (%), Dice coefficient for volume overlap and intraclass correlation coefficients across two sessions. We found that this acquisition and analysis protocol gives comparable reproducibility results to previous studies that used longer acquisitions without acceleration. We also show that

  20. Adult Skills Training Center: Feasibility Study.

    ERIC Educational Resources Information Center

    Skalski, John M.; Baratta, Anthony N.

    A 4-phase project, this study was conducted to determine the feasibility of a bilingual vocational skill training program for out-of-school youth and adults of the Perth Amboy Hispanic community. Sampled were 494 out-of-school youth and adults in the area. Findings include: (1) There is a significant need for an adult vocational skills training…

  1. D-21B RBCC Modification Feasibility Study

    NASA Technical Reports Server (NTRS)

    1999-01-01

    This report presents a feasibility study on the modifications required to re-engine the Lockheed D-21 Drone for use as a NASA RBCC engine. An introduction, background information, engine configuration and performance, propulsion system integration, loads/thermal analysis, avionics/systems, flight test results, costs and work schedule, and some conclusions are presented.

  2. Modernization of School Buildings. A Feasibility Study.

    ERIC Educational Resources Information Center

    Jongeward, Ray E.; And Others

    The conclusions of this study were that modernization of school buildings is feasible if the costs do not exceed 20 to 40 percent of the cost of new or replacement construction. Variables include site, type of interior and exterior construction, and the number of teaching stations. The teaching staff needs to correlate educational changes with…

  3. Flow Liner Slot Edge Replication Feasibility Study

    NASA Technical Reports Server (NTRS)

    Newman, John A.; Willard, Scott A.; Smith, Stephen W.; Piascik, Robert S.

    2006-01-01

    Surface replication has been proposed as a method for crack detection in space shuttle main engine flowliner slots. The results of a feasibility study show that examination of surface replicas with a scanning electron microscope can result in the detection of cracks as small as 0.005 inch, and surface flaws as small as 0.001 inch, for the flowliner material.

  4. 25 CFR 41.7 - Feasibility studies.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR EDUCATION GRANTS TO TRIBALLY CONTROLLED COMMUNITY COLLEGES AND NAVAJO COMMUNITY COLLEGE Tribally Controlled Community Colleges § 41.7 Feasibility studies. (a) Grants under § 41.8 of this subpart may be made to a Community College only after a positive determination...

  5. Renewable Energy Feasibility Study Final Report

    SciTech Connect

    Rooney, Tim

    2013-10-30

    The Gila River Indian Community (GRIC or the Community) contracted the ANTARES Group, Inc. (“ANTARES”) to assess the feasibility of solar photovoltaic (PV) installations. A solar energy project could provide a number of benefits to the Community in terms of potential future energy savings, increased employment, environmental benefits from renewable energy generation and usage, and increased energy self-sufficiency. The study addresses a number of facets of a solar project’s overall feasibility, including: Technical appropriateness; Solar resource characteristics and expected system performance; Levelized cost of electricity (LCOE) economic assessment. The Gila River Indian Community (GRIC or the Community) contracted the ANTARES Group, Inc. (“ANTARES”) to prepare a biomass resource assessment study and evaluate the feasibility of a bioenergy project on Community land. A biomass project could provide a number of benefits to the Community in terms of increased employment, environmental benefits from renewable energy generation and usage, and increased energy self-sufficiency. The study addresses a number of facets of a biomass project’s overall feasibility, including: Resource analysis and costs; Identification of potential bioenergy projects; Technical and economic (levelized cost of energy) modeling for selected project configuration.

  6. High responsivity to threat during the initial stage of perception in repression: a 3 T fMRI study

    PubMed Central

    Paul, Victoria Gabriele; Rauch, Astrid Veronika; Kugel, Harald; ter Horst, Lena; Bauer, Jochen; Dannlowski, Udo; Ohrmann, Patricia; Lindner, Christian; Donges, Uta-Susan; Kersting, Anette; Egloff, Boris

    2012-01-01

    Repression designates coping strategies such as avoidance, or denial that aim to shield the organism from threatening stimuli. Derakshan et al. have proposed the vigilance–avoidance theory of repressive coping. It is assumed that repressors have an initial rapid vigilant response triggering physiological responses to threat stimuli. In the following second stage repressors manifest avoidant cognitive biases. Functional magnetic resonance imaging at 3T was used to study neural correlates of repressive coping during the first stages of perception of threat. Pictures of human faces bearing fearful, angry, happy and neutral expressions were briefly presented masked by neutral faces. Forty study participants (20 repressive and 20 sensitizing individuals) were selected from a sample of 150 female students on the basis of their scores on the Mainz Coping Inventory. Repressors exhibited stronger neural activation than sensitizers primarily in response to masked threatening faces (vs neutral baseline) in the frontal, parietal and temporal cortex as well as in the cingulate gyrus, basal ganglia and insula. There was no brain region in which sensitizers showed increased activation to emotion expression compared to repressors. The present results are in line with the vigilance–avoidance theory which predicts heightened automatic responsivity to threatening stimuli in repression. PMID:22133562

  7. Numerical study of remote detection outside the magnet with travelling wave Magnetic Resonance Imaging at 3T

    NASA Astrophysics Data System (ADS)

    López, M.; Vázquez, F.; Solís-Nájera, S.; Rodriguez, A. O.

    2015-01-01

    The use of the travelling wave approach for high magnetic field magnetic resonance imaging has been used recently with very promising results. This approach offer images one with greater field-of-view and a reasonable signal-to-noise ratio using a circular waveguide. This scheme has been proved to be successful at 7 T and 9.4 T with whole-body imager. Images have also been acquired with clinical magnetic resonance imaging systems whose resonant frequencies were 64 MHz and 128 MHz. These results motivated the use of remote detection of the magnetic resonance signal using a parallel-plate waveguide together with 3 T clinical scanners, to acquired human leg images. The cut-off frequency of this waveguide is zero for the principal mode, allowing us to overcome the barrier of transmitting waves at lower frequency than 300 MHz or 7 T for protons. These motivated the study of remote detection outside the actual magnet. We performed electromagnetic field simulations of a parallel-plate waveguide and a phantom. The signal transmission was done at 128 MHz and using a circular surface coil located almost 200 cm away for the magnet isocentre. Numerical simulations demonstrated that the magnetic field of the principal mode propagate inside a waveguide outside the magnet. Numerical results were compared with previous experimental-acquired image data under similar conditions.

  8. 7 CFR 4280.182 - Servicing feasibility study grants.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 15 2014-01-01 2014-01-01 false Servicing feasibility study grants. 4280.182 Section... America Program General Renewable Energy System Feasibility Study Grants § 4280.182 Servicing feasibility study grants. Feasibility study grants will be serviced in accordance with Departmental regulations;...

  9. 7 CFR 4280.182 - Servicing feasibility study grants.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 15 2012-01-01 2012-01-01 false Servicing feasibility study grants. 4280.182 Section... America Program General Renewable Energy System Feasibility Study Grants § 4280.182 Servicing feasibility study grants. Feasibility study grants will be serviced in accordance with Departmental regulations;...

  10. 7 CFR 4280.182 - Servicing feasibility study grants.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 15 2013-01-01 2013-01-01 false Servicing feasibility study grants. 4280.182 Section... America Program General Renewable Energy System Feasibility Study Grants § 4280.182 Servicing feasibility study grants. Feasibility study grants will be serviced in accordance with Departmental regulations;...

  11. Numerical aerodynamic simulation facility feasibility study

    NASA Technical Reports Server (NTRS)

    1979-01-01

    There were three major issues examined in the feasibility study. First, the ability of the proposed system architecture to support the anticipated workload was evaluated. Second, the throughput of the computational engine (the flow model processor) was studied using real application programs. Third, the availability reliability, and maintainability of the system were modeled. The evaluations were based on the baseline systems. The results show that the implementation of the Numerical Aerodynamic Simulation Facility, in the form considered, would indeed be a feasible project with an acceptable level of risk. The technology required (both hardware and software) either already exists or, in the case of a few parts, is expected to be announced this year. Facets of the work described include the hardware configuration, software, user language, and fault tolerance.

  12. Aircraft towing feasibility study. Final report

    SciTech Connect

    Not Available

    1980-09-01

    Energy costs and availability are major concerns in most parts of the world. Many ways of increasing energy supply and reducing consumption are being proposed and investigated. One that holds considerable promise is the extended towing of aircraft between airport runways and terminal gate areas with engines shut down. This study provides a preliminary assessment of the constraints on and feasibility of extended aircraft towing. Past aircraft towing experience and the state-of-the-art in towing equipment are reviewed. Safety and operational concerns associated with aircraft towing are identified, and the benefits and costs of implementing aircraft towing at 20 major US airports are analyzed. It was concluded that extended aircraft towing is technically feasible and that substantial reductions in aircraft fuel consumption and air pollutant emissions can be achieved through its implementation. It was also concluded that, although capital and operating costs associated with towing would be increased, net savings could generally be attained at these airports. Because of the lack of past experience and the necessity of proving the cost effectiveness of the towing concept, a demonstration of the feasibility of large-scale aircraft towing is necessary. The study evaluates the suitability of the 20 study airports as potential demonstration sites and makes recommendations for the first demonstration project.

  13. Feasibility studies of aquifer thermal energy storage

    SciTech Connect

    Hall, S. H.

    1993-01-01

    Determining the feasibility of using aquifer thermal energy storage (ATES) for a particular heating or cooling application is an interdisciplinary effort, requiring (at a minimum) expertise in engineering and hydrology. The feasibility study should proceed in two distinct stages. The first stage, which is limited in scope and detail, is intended to show if an ATES system is technically and economically suited to the application. Focus of this preliminary investigation is on revealing the existence of factors that might weigh heavily against the use of ATES methods, and, in the absence of such factors, on choosing a suitable scale for the ATES plant and well field. The results of the preliminary investigation are used to determine if more detailed investigation--including field studies--are justified, and to facilitate comparing the advantages of ATES to those of other means of providing heating or cooling. The second stage of the feasibility study focuses on detailed aquifer characterization, refinement of engineering design and cost estimates, and economic and environmental risk analysis. The results of this investigation, if favorable, will be used to justify the expense of constructing the ATES system.

  14. 7 CFR 1737.70 - Description of feasibility study.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 11 2012-01-01 2012-01-01 false Description of feasibility study. 1737.70 Section... TELECOMMUNICATIONS LOANS Feasibility Determination Procedures § 1737.70 Description of feasibility study. (a) In connection with each loan RUS shall prepare a feasibility study that includes sections on consolidated...

  15. 7 CFR 1737.70 - Description of feasibility study.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 11 2014-01-01 2014-01-01 false Description of feasibility study. 1737.70 Section... TELECOMMUNICATIONS LOANS Feasibility Determination Procedures § 1737.70 Description of feasibility study. (a) In connection with each loan RUS shall prepare a feasibility study that includes sections on consolidated...

  16. 7 CFR 1737.70 - Description of feasibility study

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 11 2011-01-01 2011-01-01 false Description of feasibility study 1737.70 Section 1737... TELECOMMUNICATIONS LOANS Feasibility Determination Procedures § 1737.70 Description of feasibility study (a) In connection with each loan RUS shall prepare a feasibility study that includes sections on consolidated...

  17. 7 CFR 1737.70 - Description of feasibility study.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 11 2013-01-01 2013-01-01 false Description of feasibility study. 1737.70 Section... TELECOMMUNICATIONS LOANS Feasibility Determination Procedures § 1737.70 Description of feasibility study. (a) In connection with each loan RUS shall prepare a feasibility study that includes sections on consolidated...

  18. 7 CFR 1737.70 - Description of feasibility study

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 11 2010-01-01 2010-01-01 false Description of feasibility study 1737.70 Section 1737... TELECOMMUNICATIONS LOANS Feasibility Determination Procedures § 1737.70 Description of feasibility study (a) In connection with each loan RUS shall prepare a feasibility study that includes sections on consolidated...

  19. COLD-SAT feasibility study safety analysis

    NASA Technical Reports Server (NTRS)

    Mchenry, Steven T.; Yost, James M.

    1991-01-01

    The Cryogenic On-orbit Liquid Depot-Storage, Acquisition, and Transfer (COLD-SAT) satellite presents some unique safety issues. The feasibility study conducted at NASA-Lewis desired a systems safety program that would be involved from the initial design in order to eliminate and/or control the inherent hazards. Because of this, a hazards analysis method was needed that: (1) identified issues that needed to be addressed for a feasibility assessment; and (2) identified all potential hazards that would need to be controlled and/or eliminated during the detailed design phases. The developed analysis method is presented as well as the results generated for the COLD-SAT system.

  20. Feasibility studies for the Forward Spectrometer

    NASA Astrophysics Data System (ADS)

    Biernat, Jacek; P¯ANDA Collaboration

    2015-04-01

    The Forward Spectrometer designed for the P¯ANDA detector will consist of many different detector systems allowing for precise track reconstruction and particle identification. Feasibility studies for Forward Spectrometer done by means of specific reactions will be presented. In the first part of the paper, results of simulations focussing on rate estimates of the tracking stations based on straw tubes will be presented. Next, the importance of the Forward Tracker will be demonstrated through the reconstruction of the ψ(4040) → DD¯ decay. Finally, results from the analysis of the experimental data collected with a straw tube prototype designed and constructed at the Research Center in Juelich will be discussed.

  1. Reduced Field-of-View Diffusion-Weighted Imaging of the Lumbosacral Enlargement: A Pilot In Vivo Study of the Healthy Spinal Cord at 3T

    PubMed Central

    Grussu, Francesco; Louka, Polymnia; Prados, Ferran; Samson, Rebecca S.; Battiston, Marco; Altmann, Daniel R.; Ourselin, Sebastien; Miller, David H.; Gandini Wheeler-Kingshott, Claudia A. M.

    2016-01-01

    Diffusion tensor imaging (DTI) has recently started to be adopted into clinical investigations of spinal cord (SC) diseases. However, DTI applications to the lower SC are limited due to a number of technical challenges, related mainly to the even smaller size of the SC structure at this level, its position relative to the receiver coil elements and the effects of motion during data acquisition. Developing methods to overcome these problems would offer new means to gain further insights into microstructural changes of neurological conditions involving the lower SC, and in turn could help explain symptoms such as bladder and sexual dysfunction. In this work, the feasibility of obtaining grey and white matter (GM/WM) DTI indices such as axial/radial/mean diffusivity (AD/RD/MD) and fractional anisotropy (FA) within the lumbosacral enlargement (LSE) was investigated using a reduced field-of-view (rFOV) single-shot echo-planar imaging (ss-EPI) acquisition in 14 healthy participants using a clinical 3T MR system. The scan-rescan reproducibility of the measurements was assessed by calculating the percentage coefficient of variation (%COV). Mean FA was higher in WM compared to GM (0.58 and 0.4 in WM and GM respectively), AD and MD were higher in WM compared to GM (1.66 μm2ms-1 and 0.94 μm2ms-1 in WM and 1.2 μm2ms-1 and 0.82 μm2ms-1 in GM for AD and MD respectively) and RD was lower in WM compared to GM (0.58 μm2ms-1 and 0.63 μm2ms-1 respectively). The scan-rescan %COV was lower than 10% in all cases with the highest values observed for FA and the lowest for MD. This pilot study demonstrates that it is possible to obtain reliable tissue-specific estimation of DTI indices within the LSE using a rFOV ss-EPI acquisition. The DTI acquisition and analysis protocol presented here is clinically feasible and may be used in future investigations of neurological conditions implicating the lower SC. PMID:27741303

  2. Advanced Space Suit Insulation Feasibility Study

    NASA Technical Reports Server (NTRS)

    Trevino, Luis A.; Orndoff, Evelyne S.

    2000-01-01

    For planetary applications, the space suit insulation has unique requirements because it must perform in a dynamic mode to protect humans in the harsh dust, pressure and temperature environments. Since the presence of a gaseous planetary atmosphere adds significant thermal conductance to the suit insulation, the current multi-layer flexible insulation designed for vacuum applications is not suitable in reduced pressure planetary environments such as that of Mars. Therefore a feasibility study has been conducted at NASA to identify the most promising insulation concepts that can be developed to provide an acceptable suit insulation. Insulation concepts surveyed include foams, microspheres, microfibers, and vacuum jackets. The feasibility study includes a literature survey of potential concepts, an evaluation of test results for initial insulation concepts, and a development philosophy to be pursued as a result of the initial testing and conceptual surveys. The recommended focus is on microfibers due to the versatility of fiber structure configurations, the wide choice of fiber materials available, the maturity of the fiber processing industry, and past experience with fibers in insulation applications

  3. NASA CPAS Drogue Textile Riser Feasibility Study

    NASA Technical Reports Server (NTRS)

    Hennings, Elsa J.; Petersen, Michael L.; Anderson, Brian; Johnson, Brian

    2015-01-01

    Steel cable was chosen for the lower end of the drogue and main parachute risers on NASA's Orion Multi Purpose Crew Vehicle Parachute Assembly System (CPAS) to protect the risers from extreme temperatures and abrasion should they contact the crew module during deployment, as was done for Apollo. Due to the weight and deployment complexity inherent in steel, there was significant interest in the possibility of substituting textile for steel for the drogue and main parachute risers. However, textile risers could be damaged when subjected to high temperature and abrasion. Investigations were consequently performed by a subset of the authors to determine whether sacrificial, non-load-bearing textile riser covers could be developed to mitigate the thermal and abrasion concerns. Multiple material combinations were tested, resulting in a cover design capable of protecting the riser against severe riser/crew module contact interactions. A feasibility study was then conducted to evaluate the performance of the textile drogue riser cover in relevant abrasive environments. This paper describes the testing performed and documents the results of this feasibility study.

  4. Feasibility study for convertible engine torque converter

    NASA Technical Reports Server (NTRS)

    1985-01-01

    The feasibility study has shown that a dump/fill type torque converter has excellent potential for the convertible fan/shaft engine. The torque converter space requirement permits internal housing within the normal flow path of a turbofan engine at acceptable engine weight. The unit permits operating the engine in the turboshaft mode by decoupling the fan. To convert to turbofan mode, the torque converter overdrive capability bring the fan speed up to the power turbine speed to permit engagement of a mechanical lockup device when the shaft speed are synchronized. The conversion to turbofan mode can be made without drop of power turbine speed in less than 10 sec. Total thrust delivered to the aircraft by the proprotor, fan, and engine during tansient can be controlled to prevent loss of air speed or altitude. Heat rejection to the oil is low, and additional oil cooling capacity is not required. The turbofan engine aerodynamic design is basically uncompromised by convertibility and allows proper fan design for quiet and efficient cruise operation. Although the results of the feasibility study are exceedingly encouraging, it must be noted that they are based on extrapolation of limited existing data on torque converters. A component test program with three trial torque converter designs and concurrent computer modeling for fluid flow, stress, and dynamics, updated with test results from each unit, is recommended.

  5. Battery energy storage market feasibility study

    SciTech Connect

    Kraft, S.; Akhil, A.

    1997-07-01

    Under the sponsorship of the Department of Energy`s Office of Utility Technologies, the Energy Storage Systems Analysis and Development Department at Sandia National Laboratories (SNL) contracted Frost and Sullivan to conduct a market feasibility study of energy storage systems. The study was designed specifically to quantify the energy storage market for utility applications. This study was based on the SNL Opportunities Analysis performed earlier. Many of the groups surveyed, which included electricity providers, battery energy storage vendors, regulators, consultants, and technology advocates, viewed energy storage as an important enabling technology to enable increased use of renewable energy and as a means to solve power quality and asset utilization issues. There are two versions of the document available, an expanded version (approximately 200 pages, SAND97-1275/2) and a short version (approximately 25 pages, SAND97-1275/1).

  6. Aleutian Pribilof Islands Wind Energy Feasibility Study

    SciTech Connect

    Bruce A. Wright

    2012-03-27

    Under this project, the Aleutian Pribilof Islands Association (APIA) conducted wind feasibility studies for Adak, False Pass, Nikolski, Sand Point and St. George. The DOE funds were also be used to continue APIA's role as project coordinator, to expand the communication network quality between all participants and with other wind interest groups in the state and to provide continued education and training opportunities for regional participants. This DOE project began 09/01/2005. We completed the economic and technical feasibility studies for Adak. These were funded by the Alaska Energy Authority. Both wind and hydro appear to be viable renewable energy options for Adak. In False Pass the wind resource is generally good but the site has high turbulence. This would require special care with turbine selection and operations. False Pass may be more suitable for a tidal project. APIA is funded to complete a False Pass tidal feasibility study in 2012. Nikolski has superb potential for wind power development with Class 7 wind power density, moderate wind shear, bi-directional winds and low turbulence. APIA secured nearly $1M from the United States Department of Agriculture Rural Utilities Service Assistance to Rural Communities with Extremely High Energy Costs to install a 65kW wind turbine. The measured average power density and wind speed at Sand Point measured at 20m (66ft), are 424 W/m2 and 6.7 m/s (14.9 mph) respectively. Two 500kW Vestas turbines were installed and when fully integrated in 2012 are expected to provide a cost effective and clean source of electricity, reduce overall diesel fuel consumption estimated at 130,000 gallons/year and decrease air emissions associated with the consumption of diesel fuel. St. George Island has a Class 7 wind resource, which is superior for wind power development. The current strategy, led by Alaska Energy Authority, is to upgrade the St. George electrical distribution system and power plant. Avian studies in Nikolski and

  7. Feasibility Study for Paragon - Bisti Solar Ranch

    SciTech Connect

    Benally, Thomas

    2015-06-01

    The Navajo Hopi Land Commission Office (NHLCO) and Navajo Nation (NN) plan to develop renewable energy (RE) projects on the Paragon-Bisti Ranch (PBR) lands, set aside under the Navajo Hopi Land Settlement Act (NHLSA) for the benefit of Relocatees. This feasibility study (FS), which was funded under a grant from DOE’s Tribal Energy Program (TEP), was prepared in order to explore the development of the 22,000-acre PBR in northwestern New Mexico for solar energy facilities. Topics covered include: • Site Selection • Analysis of RE, and a Preliminary Design • Transmission, Interconnection Concerns and Export Markets • Financial and Economic Analysis • Environmental Study • Socioeconomic and Cultural Factors • Next Steps.

  8. Lunar Wireless Power Transfer Feasibility Study

    SciTech Connect

    Freid, Sheldon; Popovic, Zoya; Beckett, David R.; Anderson, Scott R.; Mann, Diana; Walker, Stuart

    2008-03-01

    This study examines the feasibility of a multi-kilowatt wireless radio frequency (RF) power system to transfer power between lunar base facilities. Initial analyses, show that wireless power transfer (WPT) systems can be more efficient and less expensive than traditional wired approaches for certain lunar and terrestrial applications. The study includes evaluations of the fundamental limitations of lunar WPT systems, the interrelationships of possible operational parameters, and a baseline design approach for a notionial system that could be used in the near future to power remote facilities at a lunar base. Our notional system includes state-of-the-art photovoltaics (PVs), high-efficiency microwave transmitters, low-mass large-aperture high-power transmit antennas, high-efficiency large-area rectenna receiving arrays, and reconfigurable DC combining circuitry.

  9. Exoskeleton for Soldier Enhancement Systems Feasibility Study

    SciTech Connect

    Jansen, J.F.

    2000-09-28

    The development of a successful exoskeleton for human performance augmentation (EHPA) will require a multi-disciplinary systems approach based upon sound biomechanics, power generation and actuation systems, controls technology, and operator interfaces. The ability to integrate key components into a system that enhances performance without impeding operator mobility is essential. The purpose of this study and report are to address the issue of feasibility of building a fieldable EHPA. Previous efforts, while demonstrating progress and enhancing knowledge, have not approached the level required for a fully functional, fieldable system. It is doubtless that the technologies required for a successful exoskeleton have advanced, and some of them significantly. The question to be addressed in this report is have they advanced to the point of making a system feasible in the next three to five years? In this study, the key technologies required to successfully build an exoskeleton have been examined. The primary focus has been on the key technologies of power sources, actuators, and controls. Power sources, including internal combustion engines, fuel cells, batteries, super capacitors, and hybrid sources have been investigated and compared with respect to the exoskeleton application. Both conventional and non-conventional actuator technologies that could impact EHPA have been assessed. In addition to the current state of the art of actuators, the potential for near-term improvements using non-conventional actuators has also been addressed. Controls strategies, and their implication to the design approach, and the exoskeleton to soldier interface have also been investigated. In addition to these key subsystems and technologies, this report addresses technical concepts and issues relating to an integrated design. A recommended approach, based on the results of the study is also presented.

  10. 7 CFR 4280.173 - Grant funding for feasibility studies.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 15 2014-01-01 2014-01-01 false Grant funding for feasibility studies. 4280.173... America Program General Renewable Energy System Feasibility Study Grants § 4280.173 Grant funding for feasibility studies. (a) Maximum grant amount. The maximum amount of grant funds that will be made...

  11. Feasibility Study of Hydrogen Fueled Supersonic Transport

    NASA Astrophysics Data System (ADS)

    Yuhara, Tatsunori; Rinoie, Kenichi

    Recently, environmental problems have been paid great attention in the world. According to the current report of ICAO, CO2 emissions of aircraft to the total emissions will increase at an average annual rate of 3˜4%. Furthermore, stable supply of oil is becoming difficult. Without exceptions, those are hitting aviation industries. Therefore, in the near future, the time to shift from kerosene to liquid hydrogen (LH2) as fuel of aircraft will come. An idea of supersonic transport (SST) fueled by LH2 as one of the next-generation SST has been proposed by JAXA. The purpose of this study is to compare the weight, aerodynamics and cost of hydrogen fueled SST with those of kerosene fueled SST and to discuss its feasibilities. A possibility of two-bubble fuselage configuration is also evaluated.

  12. Bin Set 1 Calcine Retrieval Feasibility Study

    SciTech Connect

    R. D. Adams; S. M. Berry; K. J. Galloway; T. A. Langenwalter; D. A. Lopez; C. M. Noakes; H. K. Peterson; M. I. Pope; R. J. Turk

    1999-10-01

    At the Department of Energy's Idaho Nuclear Technology and Engineering Center, as an interim waste management measure, both mixed high-level liquid waste and sodium bearing waste have been solidified by a calculation process and are stored in the Calcine Solids Storage Facilities. This calcined product will eventually be treated to allow final disposal in a national geologic repository. The Calcine Solids Storage Facilities comprise seven ''bit sets.'' Bin Set 1, the first to be constructed, was completed in 1959, and has been in service since 1963. It is the only bin set that does not meet current safe-shutdown earthquake seismic criteria. In addition, it is the only bin set that lacks built-in features to aid in calcine retrieval. One option to alleviate the seismic compliance issue is to transport the calcine from Bin Set 1 to another bin set which has the required capacity and which is seismically qualified. This report studies the feasibility of retrieving the calcine from Bi n Set 1 and transporting it into Bin Set 6 which is located approximately 650 feet away. Because Bin Set 1 was not designed for calcine retrieval, and because of the high radiation levels and potential contamination spread from the calcined material, this is a challenging engineering task. This report presents preconceptual design studies for remotely-operated, low-density, pneumatic vacuum retrieval and transport systems and equipment that are based on past work performed by the Raytheon Engineers and Constructors architectural engineering firm. The designs presented are considered feasible; however, future development work will be needed in several areas during the subsequent conceptual design phase.

  13. BIOMASS-TO-ENERGY FEASIBILITY STUDY

    SciTech Connect

    Cecil T. Massie

    2002-09-03

    The purpose of this study was to assess the economic and technical feasibility of producing electricity and thermal energy from biomass by gasification. For an economic model we chose a large barley malting facility operated by Rahr Malting Co. in Shakopee, Minnesota. This plant provides an excellent backdrop for this study because it has both large electrical loads and thermal loads that allowed us to consider a wide range of sizes and technical options. In the end, eleven scenarios were considered ranging from 3.1 megawatts (MWe) to 19.8 MWe. By locating the gasification and generation at an agricultural product processing plant with large electrical and thermal loads, the expectation was that some of the limitations of stand-alone biomass power plants would be overcome. In addition, since the process itself created significant volumes of low value biomass, the hope was that most of the biomass gathering and transport issues would be handled as well. The development of low-BTU gas turbines is expected to fill a niche between the upper limit of multiple spark ignited engine set systems around 5 MWe and the minimum reasonable scale for steam turbine systems around 10 MWe.

  14. Alterations of GABA and glutamate-glutamine levels in premenstrual dysphoric disorder: a 3T proton magnetic resonance spectroscopy study.

    PubMed

    Liu, Bo; Wang, Guangbin; Gao, Dongmei; Gao, Fei; Zhao, Bin; Qiao, Mingqi; Yang, Huan; Yu, Yanhong; Ren, Fuxin; Yang, Ping; Chen, Weibo; Rae, Caroline D

    2015-01-30

    Increasing evidence has suggested that the GABAergic neurotransmitter system is involved in the pathogenesis of premenstrual dysphoric disorder (PMDD). We used proton magnetic resonance spectroscopy ((1)H MRS) to investigate whether PMDD is associated with alterations in brain GABA levels. Levels of glutamate-glutamine (Glx) were also explored. Participants comprised 22 women with PMDD and 22 age-matched healthy controls who underwent 3T (1)H MRS during the late luteal phase of the menstrual cycle. GABA+ and Glx levels were quantified in the anterior cingulate cortex/medial prefrontal cortex (ACC/mPFC) and the left basal ganglia (ltBG). Water-scaled GABA+ concentrations and GABA+/tCr ratios were significantly lower in both the ACC/mPFC and ltBG regions of PMDD women than in healthy controls. Glx/tCr ratios were significantly higher in the ACC/mPFC region of PMDD women than healthy controls. Our preliminary findings provide the first report of abnormal levels of GABA+ and Glx in mood-related brain regions of women with PMDD, indicating that dysregulation of the amino acid neurotransmitter system may be an important neurobiological mechanism in the pathogenesis of PMDD.

  15. Feasibility study for positron emission mammography.

    PubMed

    Thompson, C J; Murthy, K; Weinberg, I N; Mako, F

    1994-04-01

    A feasibility study is presented for a small, low-cost, dedicated device for positron emission mammography. Two detector arrays above and below the breast would be placed in a conventional mammography unit. These detectors are sensitive to positron annihilation radiation, and are connected to a coincidence circuit and a multiplane image memory. Images of the distribution of positron-emitting isotope are obtained in real time by incrementing the memory location at the intersection of each line of response. Monte Carlo simulations of a breast phantom are compared with actual scans of this phantom in a conventional PET scanner. The simulations and experimental data are used to predict the performance of the proposed system. Spatial resolution experiments using very narrow bismuth germanate BGO crystals suggest that spatial resolutions of about 2 mm should be possible. The efficiency of the proposed device is about ten times that of a conventional brain scanner. The scatter fraction is greater, but the scattered radiation has a very flat distribution. By designing the device to fit in an existing mammography unit, conventional mammograms can be taken after the injection of the radio-pharmaceutical allowing exact registration of the emission and conventional mammographic images.

  16. Feasibility study for long lifetime helium dewar

    NASA Technical Reports Server (NTRS)

    Parmley, R. T.

    1981-01-01

    A feasible concept for a launchable three year lifetime helium dewar was investigted. Current helium dewar designs were examined to see where the largest potential reductions in parasitic heat loads can be made. The study was also devoted to examining support concepts. The support concept chosen, a passive orbital disconnect strut (PODS), has an orbital support conductance that is lower by more than an order of magnitude over current tension band supports. This lower support conductance cuts the total dewar weight in half for the same three year life time requirements. Effort was also concentrated on efficient wire feed through designs and vapor cooling of the multilayer insulation, supports, wire feed throughs and plumbing penetrations. A single stage helium dewar vs. dual stage dewars with a guard cryogen of nitrogen or neon was examined. The single stage dewar concept was selected. Different support concepts were analyzed from which the PODS support concepts was chosen. A preliminary design of the dewar was thermally and structurally analyzed and laid out including system weights, thermal performance and performance sensitivities.

  17. Pinellas Plant feasibility study. Final report

    SciTech Connect

    1994-09-01

    The Pinellas Plant was built in 1956 to manufacture neutron generators, a principal component in nuclear weapons. In September 1990, the Department of Health and Rehabilitative Services (HRS) entered into an agreement with DOE to independently examine environmental monitoring data from the plant and health data from Pinellas County to determine if an epidemiological study is technically feasible to measure possible off-site health effects from ionizing radiation. Through normal plant operations, some radioactive materials have been released to the environment. Eighty percent of the total plant releases of 107,707 curies occurred in the early years of plant operation (1957--1960). The primary materials released were tritium gas, tritium oxide and krypton-85. Environmental monitoring for radioactive releases from the plant has been done regularly since 1975. The US Public Health Service Centers for Disease Control and Prevention (CDC), in assisting HRS, has determined that sufficient radiological data exist by which a dose reconstruction can be done. A dose reconstruction can provide an estimate of how much radiological exposure someone living in the vicinity of the Pinellas Plant may have suffered from environmental releases.

  18. Economic feasibility study for phosphorus recovery processes.

    PubMed

    Molinos-Senante, María; Hernández-Sancho, Francesc; Sala-Garrido, Ramón; Garrido-Baserba, Manel

    2011-06-01

    Phosphorus recovery from wastewater has become a necessity for sustainable development because phosphorus is a non-renewable essential resource, and its discharge into the environment causes serious negative impacts. There are no economic incentives for the implementation of phosphorus recovery technologies because the selling price of rock phosphate is lower than phosphorus recovered from sewage. The methodologies used to determine the feasibility of such projects are usually focused on internal costs without considering environmental externalities. This article shows a methodology to assess the economic feasibility of wastewater phosphorus recovery projects that takes into account internal and external impacts. The shadow price of phosphorus is estimated using the directional distance function to measure the environmental benefits obtained by preventing the discharge of phosphorus into the environment. The economic feasibility analysis taking into account the environmental benefits shows that the phosphorus recovery is viable not only from sustainable development but also from an economic point of view.

  19. Ionic alkali halide XUV laser feasibility study

    SciTech Connect

    Yang, T.T.; Gylys, V.T.; Bower, R.D.; Harris, D.G.; Blauer, J.A.; Turner, C.E.; Hindy, R.N.

    1989-11-10

    The objective of this work is to assess the feasibility of a select set of ionic alkali halide XUV laser concepts by obtaining the relevant kinetic and spectroscopic parameters required for a proof-of-principle and conceptual design. The proposed lasers operate in the 80--200 nm spectral region and do not require input from outside radiation sources for their operation. Frequency up-conversion and frequency mixing techniques and therefore not considered in the work to be described. An experimental and theoretical study of a new type of laser operating in the extreme ultraviolet wavelength region has been conducted. The lasing species are singly ionized alkali halide molecules such as Rb{sup 2+}F{sub {minus}}, Rb{sup 2+}Br{sup {minus}} and Cs{sup 2+}F{sup {minus}}. These species are similar in electronic structure to the rare gas halide excimers, such as XeF and Krf, except that the ionic molecules emit at wavelengths of 80--200 nm, much shorter than the conventional rare-gas halide excimer laser. The radiative lifetime of these molecules are typically near 1 ns, which is about an order of magnitude shorter than that for rare-gas halide systems. The values of the cross section for stimulated emission are on the order of 1 {times} 10{sup {minus}16}cm{sup 2}. Because of the fundamental similarity to existing UV lasers, these systems show promise as a high power, efficient XUV lasers. 55 refs., 50 figs., 5 tabs.

  20. 7 CFR 1980.442 - Feasibility studies.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... reports shall be prepared by individuals who have previous experience in the design and analysis of... impact analysis. The report shall be based upon verifiable data and contain sufficient information and analysis so that a determination may be made on the technical feasibility of achieving the levels of...

  1. 7 CFR 1980.442 - Feasibility studies.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... reports shall be prepared by individuals who have previous experience in the design and analysis of... impact analysis. The report shall be based upon verifiable data and contain sufficient information and analysis so that a determination may be made on the technical feasibility of achieving the levels of...

  2. 7 CFR 1980.442 - Feasibility studies.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ..., availability of trained or trainable labor; utilities; rail, air and road service to the site; and the overall economic impact of the project. (b) Market feasibility. Information on the sales organization and... impact analysis. The report shall be based upon verifiable data and contain sufficient information...

  3. X-connectors for tubing - Feasibility study

    NASA Technical Reports Server (NTRS)

    Bragg, K.; Fuhrmann, H. W.

    1970-01-01

    Connector tests, including 70 deg F leakage and vibration, proof pressure, burst pressure, tensility, thermal shock, high and low temperature leakage, and simultaneous high temperature vibration and leakage, prove feasibility of lightweight 0.5-in. X-connectors for 4500-lb/sq in. service pressures.

  4. 40 CFR 35.1605-8 - Diagnostic-feasibility study.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 1 2011-07-01 2011-07-01 false Diagnostic-feasibility study. 35.1605-8... Freshwater Lakes § 35.1605-8 Diagnostic-feasibility study. A two-part study to determine a lake's current... the study includes gathering information and data to determine the limnological,...

  5. 40 CFR 35.1605-8 - Diagnostic-feasibility study.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 1 2013-07-01 2013-07-01 false Diagnostic-feasibility study. 35.1605-8... Freshwater Lakes § 35.1605-8 Diagnostic-feasibility study. A two-part study to determine a lake's current... the study includes gathering information and data to determine the limnological,...

  6. 40 CFR 35.1605-8 - Diagnostic-feasibility study.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 1 2012-07-01 2012-07-01 false Diagnostic-feasibility study. 35.1605-8... Freshwater Lakes § 35.1605-8 Diagnostic-feasibility study. A two-part study to determine a lake's current... the study includes gathering information and data to determine the limnological,...

  7. 40 CFR 35.1605-8 - Diagnostic-feasibility study.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 1 2014-07-01 2014-07-01 false Diagnostic-feasibility study. 35.1605-8... Freshwater Lakes § 35.1605-8 Diagnostic-feasibility study. A two-part study to determine a lake's current... the study includes gathering information and data to determine the limnological,...

  8. 40 CFR 35.1605-8 - Diagnostic-feasibility study.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Diagnostic-feasibility study. 35.1605-8... Freshwater Lakes § 35.1605-8 Diagnostic-feasibility study. A two-part study to determine a lake's current... the study includes gathering information and data to determine the limnological,...

  9. Navy Paint Booth Conversion Feasibility Study

    DTIC Science & Technology

    1989-01-01

    A-i viii SECTION 1 INTRODUCTION The Navy is currently exploring the possibility of reducing the quantities of...discharged, and the paint sludge waste which is generated must be disposed of as hazardous waste. The waste minimization option that the Navy is exploring is...addition, the cost-effectiveness and feasibility of converting NSY and NADEP paint booths is explored . The emphasis, however, is on the hazardous waste

  10. B Plant process piping replacement feasibility study

    SciTech Connect

    Howden, G.F.

    1996-02-07

    Reports on the feasibility of replacing existing embedded process piping with new more corrosion resistant piping between cells and between cells and a hot pipe trench of a Hanford Site style canyon facility. Provides concepts for replacement piping installation, and use of robotics to replace the use of the canyon crane as the primary means of performing/supporting facility modifications (eg, cell lining, pipe replacement, equipment reinstallation) and operational maintenenace.

  11. Feasibility study of autofluorescence mammary ductoscopy

    NASA Astrophysics Data System (ADS)

    Douplik, Alexandre; Leong, Wey L.; Easson, Alexandra M.; Done, Susan; Netchev, George; Wilson, Brian C.

    2009-07-01

    We report the technical feasibility of autofluorescence ductoscopy in the ex-vivo setting. The current imaging algorithm for visualizing tumor tissue against the normal tissue background, although developed and optimized for other organs, appears to provide discrimination between intraductal tumor and normal ductal tissue. Point fluoroscopy is also performed. Although the optical ``geometry'' for this is different, the findings are consistent with the imaging observations.

  12. Feasibility study of autofluorescence mammary ductoscopy.

    PubMed

    Douplik, Alexandre; Leong, Wey L; Easson, Alexandra M; Done, Susan; Netchev, George; Wilson, Brian C

    2009-01-01

    We report the technical feasibility of autofluorescence ductoscopy in the ex-vivo setting. The current imaging algorithm for visualizing tumor tissue against the normal tissue background, although developed and optimized for other organs, appears to provide discrimination between intraductal tumor and normal ductal tissue. Point fluoroscopy is also performed. Although the optical "geometry" for this is different, the findings are consistent with the imaging observations.

  13. 41 CFR 101-5.104-4 - Scheduling feasibility studies.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... FEDERAL BUILDINGS AND COMPLEXES 5.1-General § 101-5.104-4 Scheduling feasibility studies. The schedule of feasibility studies will be coordinated by GSA with its construction, space management, and buildings... studies. 101-5.104-4 Section 101-5.104-4 Public Contracts and Property Management Federal...

  14. 41 CFR 101-5.104-4 - Scheduling feasibility studies.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... FEDERAL BUILDINGS AND COMPLEXES 5.1-General § 101-5.104-4 Scheduling feasibility studies. The schedule of feasibility studies will be coordinated by GSA with its construction, space management, and buildings... studies. 101-5.104-4 Section 101-5.104-4 Public Contracts and Property Management Federal...

  15. 41 CFR 101-5.104-4 - Scheduling feasibility studies.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... studies. 101-5.104-4 Section 101-5.104-4 Public Contracts and Property Management Federal Property... FEDERAL BUILDINGS AND COMPLEXES 5.1-General § 101-5.104-4 Scheduling feasibility studies. The schedule of feasibility studies will be coordinated by GSA with its construction, space management, and...

  16. 41 CFR 101-5.104-4 - Scheduling feasibility studies.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... studies. 101-5.104-4 Section 101-5.104-4 Public Contracts and Property Management Federal Property... FEDERAL BUILDINGS AND COMPLEXES 5.1-General § 101-5.104-4 Scheduling feasibility studies. The schedule of feasibility studies will be coordinated by GSA with its construction, space management, and...

  17. Feasibility Study & Design of Brightfield Solar Farm

    SciTech Connect

    Law, Susan

    2014-09-28

    This Congressionally Directed Project originally provided funds to the Township of Lower Providence, Pennsylvania for the purpose of investigating the potential for a renewable energy generation facility to make beneficial reuse of a closed landfill located within the Township, known as Moyer Landfill. Early in the course of the project, it was determined through collaboration and discussion with DOE to alter the scope of the project to include a feasibility assessment of a landfill solar project, as well as to construct a demonstration solar project at the municipal facilities to provide an educational and community outreach opportunity for the Township to offer regarding solar photovoltaic (“PV”) electricity generation.

  18. F-8 oblique wing structural feasibility study

    NASA Technical Reports Server (NTRS)

    Koltko, E.; Katz, A.; Bell, M. A.; Smith, W. D.; Lauridia, R.; Overstreet, C. T.; Klapprott, C.; Orr, T. F.; Jobe, C. L.; Wyatt, F. G.

    1975-01-01

    The feasibility of fitting a rotating oblique wing on an F-8 aircraft to produce a full scale manned prototype capable of operating in the transonic and supersonic speed range was investigated. The strength, aeroelasticity, and fatigue life of such a prototype are analyzed. Concepts are developed for a new wing, a pivot, a skewing mechanism, control systems that operate through the pivot, and a wing support assembly that attaches in the F-8 wing cavity. The modification of the two-place NTF-8A aircraft to the oblique wing configuration is discussed.

  19. Distribution transformer BIL reduction feasibility study

    SciTech Connect

    Baranowski, J.F.; Goedde, G.L. . Thomas A. Edison Technical Center)

    1990-01-01

    This paper summarizes an investigation into the feasibility of reducing basic insulation levels (BIL) for oil-immersed distribution transformers. A projected market makeup of popular kVA and system voltages was determined for the 5 kV to 35 kV insulation classes of pole-type and pad-mount distribution transformers. Reduced BIL design cases were used to determine the impact on the transformer's design and performance. The final results provide both industry cost and total owning cost savings.

  20. Feasibility Study of Thin Film Thermocouple Piles

    NASA Technical Reports Server (NTRS)

    Sisk, R. C.

    2001-01-01

    Historically, thermopile detectors, generators, and refrigerators based on bulk materials have been used to measure temperature, generate power for spacecraft, and cool sensors for scientific investigations. New potential uses of small, low-power, thin film thermopiles are in the area of microelectromechanical systems since power requirements decrease as electrical and mechanical machines shrink in size. In this research activity, thin film thermopile devices are fabricated utilizing radio frequency sputter coating and photoresist lift-off techniques. Electrical characterizations are performed on two designs in order to investigate the feasibility of generating small amounts of power, utilizing any available waste heat as the energy source.

  1. EPA RE-Powering Mapper Feasibility Studies

    EPA Pesticide Factsheets

    The U.S. Environmental Protection Agency (EPA) Office of Land and Emergency Management (OLEM) Office of Communications, Partnerships and Analysis (OCPA) initiated the RE-Powering America's Land Initiative to demonstrate the enormous potential that contaminated lands, landfills, and mine sites provide for developing renewable energy in the United States. As part of the RE-Powering America's Land Initiative, the EPA and the U.S. Department of Energy's National Renewable Energy Laboratory (NREL) evaluated the feasibility of developing renewable energy production on Superfund, brownfields, and former landfill or mining sites. These reports pair EPA's expertise on contaminated sites with the renewable energy expertise of NREL.

  2. 41 CFR 101-5.104-4 - Scheduling feasibility studies.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... FEDERAL BUILDINGS AND COMPLEXES 5.1-General § 101-5.104-4 Scheduling feasibility studies. The schedule of feasibility studies will be coordinated by GSA with its construction, space management, and buildings... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Scheduling...

  3. CE: Defining and Understanding Pilot and Other Feasibility Studies.

    PubMed

    Morris, Nancy S; Rosenbloom, Deborah A

    2017-03-01

    : Nurses are becoming increasingly involved in conducting clinical research in which feasibility studies are often the first steps. Understanding why and how these studies are conducted may encourage clinical nurses to engage with researchers and take advantage of opportunities to participate in advancing nursing science. This article provides an overview of feasibility studies, including pilot studies, and explains the type of preliminary data they seek to provide in order to make larger, future studies more efficient and successful. By way of example, the authors discuss a feasibility study they conducted that illustrates the key components and necessary steps involved in such work.

  4. Feasibility study of a 200 ampere battery

    NASA Astrophysics Data System (ADS)

    Baldwin, A. R.

    1991-06-01

    The results of a Sandia National Laboratories program to design and develop a high-current thermal battery for the Hypersonic Weapons Technology Program are presented. The feasibility of a 200 A, 150 s, 12 Vdc primary battery was demonstrated under ambient conditions. New header feedthrough design concepts were used, and new internal current collectors and internal power leads were considered. The Li(Si)/LiBr-LiCl-LiF/FeS2 electrochemical system has shown exceptional performance at the high-current operation conditions. A high-rate Zinc/Silver Oxide secondary cell was also evaluated, and the results are presented in this report. These cells exhibited excellent high-rate discharge performance.

  5. Volumetric Analysis of the Hypothalamus in Huntington Disease Using 3T MRI: The IMAGE-HD Study

    PubMed Central

    Gabery, Sanaz; Georgiou-Karistianis, Nellie; Lundh, Sofia Hult; Cheong, Rachel Y.; Churchyard, Andrew; Chua, Phyllis; Stout, Julie C.; Egan, Gary F.; Kirik, Deniz; Petersén, Åsa

    2015-01-01

    Huntington disease (HD) is a fatal neurodegenerative disorder caused by an expanded CAG repeat in the huntingtin gene. Non-motor symptoms and signs such as psychiatric disturbances, sleep problems and metabolic dysfunction are part of the disease manifestation. These aspects may relate to changes in the hypothalamus, an area of the brain involved in the regulation of emotion, sleep and metabolism. Neuropathological and imaging studies using both voxel-based morphometry (VBM) of magnetic resonance imaging (MRI) as well as positron emission tomography (PET) have demonstrated pathological changes in the hypothalamic region during early stages in symptomatic HD. In this investigation, we aimed to establish a robust method for measurements of the hypothalamic volume in MRI in order to determine whether the hypothalamic dysfunction in HD is associated with the volume of this region. Using T1-weighted imaging, we describe a reproducible delineation procedure to estimate the hypothalamic volume which was based on the same landmarks used in histologically processed postmortem hypothalamic tissue. Participants included 36 prodromal HD (pre-HD), 33 symptomatic HD (symp-HD) and 33 control participants who underwent MRI scanning at baseline and 18 months follow-up as part of the IMAGE-HD study. We found no evidence of cross-sectional or longitudinal changes between groups in hypothalamic volume. Our results suggest that hypothalamic pathology in HD is not associated with volume changes. PMID:25659157

  6. Prefrontal NAA and Glx Levels in Different Stages of Psychotic Disorders: a 3T 1H-MRS Study

    PubMed Central

    Liemburg, Edith; Sibeijn-Kuiper, Anita; Bais, Leonie; Pijnenborg, Gerdina; Knegtering, Henderikus; van der Velde, Jorien; Opmeer, Esther; de Vos, Annerieke; Dlabac-De Lange, Jozarni; Wunderink, Lex; Aleman, André

    2016-01-01

    H-Magnetic Resonance Spectroscopy (1H-MRS) can offer insights in various neuropathologies by measuring metabolite levels in the brain. In the current study we investigated the levels of glutamate + glutamine (Glx, neurotransmitter and precursor) and N-Acetyl Aspartate + glutamic acid (NAA + NAAG; neuronal viability) in the prefrontal cortex of patients with a psychotic disorder and people at Ultra High Risk (UHR) for psychosis. A 1H-MRS spectrum was acquired in 31 patients with a recent onset psychotic disorder and 60 with a chronic state, 16 UHR patients and 36 healthy controls. Absolute metabolite levels were calculated using LCModel with a reference water peak. Groups were compared while taking into account age and partial volume effects. Moreover, we investigated associations with positive and negative symptoms, duration of illness, and antipsychotic treatment in patients. The most notable finding is that chronicity of schizophrenia was related to decreased levels of Glx and NAA. On the other hand, although on an exploratory note, UHR showed increased levels of prefrontal Glx and NAA levels with increasing age. Our results may indicate an initial Glx and NAA increase and subsequent decrease during illness progression that may be related to the neurotoxic effects of glutamate. PMID:26903078

  7. Prefrontal NAA and Glx Levels in Different Stages of Psychotic Disorders: a 3T 1H-MRS Study.

    PubMed

    Liemburg, Edith; Sibeijn-Kuiper, Anita; Bais, Leonie; Pijnenborg, Gerdina; Knegtering, Henderikus; van der Velde, Jorien; Opmeer, Esther; de Vos, Annerieke; Dlabac-De Lange, Jozarni; Wunderink, Lex; Aleman, André

    2016-02-23

    H-Magnetic Resonance Spectroscopy ((1)H-MRS) can offer insights in various neuropathologies by measuring metabolite levels in the brain. In the current study we investigated the levels of glutamate + glutamine (Glx, neurotransmitter and precursor) and N-Acetyl Aspartate + glutamic acid (NAA + NAAG; neuronal viability) in the prefrontal cortex of patients with a psychotic disorder and people at Ultra High Risk (UHR) for psychosis. A (1)H-MRS spectrum was acquired in 31 patients with a recent onset psychotic disorder and 60 with a chronic state, 16 UHR patients and 36 healthy controls. Absolute metabolite levels were calculated using LCModel with a reference water peak. Groups were compared while taking into account age and partial volume effects. Moreover, we investigated associations with positive and negative symptoms, duration of illness, and antipsychotic treatment in patients. The most notable finding is that chronicity of schizophrenia was related to decreased levels of Glx and NAA. On the other hand, although on an exploratory note, UHR showed increased levels of prefrontal Glx and NAA levels with increasing age. Our results may indicate an initial Glx and NAA increase and subsequent decrease during illness progression that may be related to the neurotoxic effects of glutamate.

  8. Feasibility study of the AOSTA experimental campaign

    NASA Astrophysics Data System (ADS)

    Carta, M.; Blaise, P.; Bethaz, C.; Boccia, F.; Fabrizio, V.; Geslot, B.; Grossi, A.; Gruel, A.

    2016-03-01

    The reduction of the nuclear waste is one of the most important nuclear issues. The high radiotoxicity of the spent fuel is due to plutonium and some minor actinides (MAs) such as neptunium, americium and curium, above all. One way to reduce their hazard is to destroy by fission MAs in appropriate nuclear reactors. To allow the MAs destruction an important effort have been done on the nuclear data due to the poor knowledge in this field. In the framework of one of the NEA Expert Group on Integral Experiments for Minor Actinide Management an analysis of the feasibility of MAs irradiation campaign in the TAPIRO fast research reactor is carried out. This paper provides preliminary results obtained by calculations modelling the irradiation, in different TAPIRO irradiation channels, of some CEA samples coming from the French experimental campaign OSMOSE, loaded with different contents of MAs, in order to access, through particular peak spectrometry, to their capture cross section. On the basis of neutron transport calculation results, obtained by both deterministic and Monte Carlo methods, an estimate of the irradiated samples counting levels from the AOSTA (Activation of OSMOSE Samples in TAPIRO) experimental campaign is provided.

  9. STS propellant densification feasibility study data book

    NASA Technical Reports Server (NTRS)

    Fazah, M. M.

    1994-01-01

    The feasibility of using densification or subcooling with respect to standard temperature propellants on the Space Transportation System (STS) in order to achieve a payload gain is discussed in this report. The objective is to determine the magnitude of the payload gain and to identify any system impacts to the space shuttle on either flight systems or ground systems. Results show that a payload benefit can be obtained by subcooling the liquid hydrogen (LH2) from a nominal temperature of 36.4 R to 28.5 R and by subcooling the liquid oxygen (LO2) from a nominal temperature of 164 R to either 132.1 R or 141.4 R. When the propellants are subcooled to 28.5 R and 132.1 R for the LH2 and LO2, respectively, a maximum payload gain of 7,324 lb can be achieved, and when the propellants are subcooled to 28.5 R and 141.5 R for the LH2 and LO2, respectively, a maximum payload gain of 6,841 lb can be achieved. If the LH2 is subcooled to 28.5 R while the LH2 and LO2 remains at the nominal conditions, a maximum payload gain of 1,303 lb can be achieved.

  10. Solid waste electrical generating feasibility study

    SciTech Connect

    Not Available

    1982-05-01

    The feasibility of recommissioning the existing 3 megawatt steam turbine driven electrical generator of the Municipal Utilities of Valley City, North Dakota, using steam generated in a new facility from the incineration of municipal solid waste generated in the area is examined. It is concluded that (1) there is sufficient municipal solid waste that can be obtained from Valley City, Moorhead and Jamestown (and/or West Fargo) to fuel the plant; (2) the seasonal fluctuation in the amounts of municipal solid waste indicates that a supplementary source of fuel for use during winter would increase plant efficiency; (3) the probable capital cost of the project will be $3,590,000.00; (4) the cost of production of electricity could range from 3.72 cents/kWh to 4.90 cents/kWh, depending on the construction costs, interest rate, lifetime of the project, availability for the plant and steam produced per ton of municipal solid waste; (5) there is no compelling reason why the tertiary cell of the sewage lagoon, cannot be used for cooling water; (6) the State Health Department is ambivalent toward the project; and (7) the public perception of the project is positive. 92 references.

  11. Co-combustion feasibility study. Final report

    SciTech Connect

    Handcock, D.J.

    1995-01-01

    This report investigates the technical and economic feasibility of co-combusting municipal sewage sludge produced by the Saratoga County Sewer District No. 1 with paper mill sludge produced by the Cottrell Paper Company, Encore Paper Company, International Paper Company, Mohawk Paper Mills, and TAGSONS Papers at the Saratoga County Sewer District No. 1`s secondary wastewater treatment plant and recovering any available energy products. The co-combustion facility would consist of sludge and wood chip storage and conveying systems, belt filter presses, screw presses, fluidized-bed incinerators, venturi scrubbers and tray cooling systems, ash dewatering facilities, heat recovery steam generators, gas-fired steam superheaters, and a back-pressure steam turbine system. Clean waste wood chips would be used as an auxiliary fuel in the fluidized-bed incinerators. It is recommended that the ash produced by the proposed facility be beneficially used, potentially as a raw material in the manufacture of cement and/or as an interim barrier layer in landfills.

  12. Sedimentary Geothermal Feasibility Study: October 2016

    SciTech Connect

    Augustine, Chad; Zerpa, Luis

    2017-01-01

    The objective of this project is to analyze the feasibility of commercial geothermal projects using numerical reservoir simulation, considering a sedimentary reservoir with low permeability that requires productivity enhancement. A commercial thermal reservoir simulator (STARS, from Computer Modeling Group, CMG) is used in this work for numerical modeling. In the first stage of this project (FY14), a hypothetical numerical reservoir model was developed, and validated against an analytical solution. The following model parameters were considered to obtain an acceptable match between the numerical and analytical solutions: grid block size, time step and reservoir areal dimensions; the latter related to boundary effects on the numerical solution. Systematic model runs showed that insufficient grid sizing generates numerical dispersion that causes the numerical model to underestimate the thermal breakthrough time compared to the analytic model. As grid sizing is decreased, the model results converge on a solution. Likewise, insufficient reservoir model area introduces boundary effects in the numerical solution that cause the model results to differ from the analytical solution.

  13. Ultra-low field T1 vs. T1rho at 3T and 7T: study of rotationally immobilized protein gels and animal brain tissues

    NASA Astrophysics Data System (ADS)

    Dong, Hui; Inglis, Ben; Barr, Ian; Clarke, John

    2015-03-01

    Clinical magnetic resonance imaging (MRI) machines operating in static fields of typically 1.5 T or 3 T can capture information on slow molecular dynamics utilizing the so-called T1rho technique. This technique, in which a radiofrequency (RF) spin-lock field is applied with microtesla amplitude, has been used, for example, to determine the onset time of stroke in studies on rats. The long RF pulse, however, may exceed the specific absorption rate (SAR) limit, putting subjects at risk. Ultra-low-field (ULF) MRI, based on Superconducting Quantum Interference Devices (SQUIDs), directly detects proton signals at a static magnetic field of typically 50-250 μT. Using our ULF MRI system with adjustable static field of typically 55 to 240 μT, we systematically measured the T1 and T2 dispersion profiles of rotationally immobilized protein gels (bovine serum albumin), ex vivo pig brains, and ex vivo rat brains with induced stroke. Comparing the ULF results with T1rho dispersion obtained at 3 T and 7 T, we find that the degree of protein immobilization determines the frequency-dependence of both T1 and T1rho. Furthermore, T1rho and ULF T1 show similar results for stroke, suggesting that ULF MRI may be used to image traumatic brain injury with negligible SAR. This research was supported by the Henry H. Wheeler, Jr. Brain Imaging Center and the Donaldson Trust.

  14. Study of smart antibacterial PCL-xFe3 O4 thin films using mouse NIH-3T3 fibroblast cells in vitro.

    PubMed

    Pai B, Ganesh; Kulkarni, Ajay V; Jain, Shilpee

    2016-01-13

    Surface energy plays a major role in prokaryotic and eukaryotic cell interactions with biomedical devices. In the present study, poly(ε-caprolactone)-xFe3 O4 nanoparticles (PCL-xFO NPs; x = 0, 10, 20, 30, 40, 60 wt% FO concentration in PCL) composite thin films were developed for skin tissue regeneration. The surface properties in terms of roughness, surface energy, wettability of the thin films were altered with the incorporation of Fe3 O4 NPs. These thin films show antimicrobial properties and cyto-compatibility with NIH 3T3 mouse embryonic fibroblast cells. The porosity and thickness of the films were controlled by varying RPM of the spin coater. Interestingly, at 1000 RPM the roughness of the film decreased with increasing concentrations of FO NPs in PCL, whereas the surface energy increased with increasing FO NPs concentrations. Furthermore, the spreading of NIH-3T3 cells grown on PCL-xFO thin films was less as compared to control (TCPS), however cells overcame this effect after 48 h of seeding and cells spread similarly to those grown on TCPS after 48 h. Also, the incorporation of FO NPs in thin films induced inner membrane permeabilization in E. coli bacteria leading to bacterial cell death. The viability of E. coli bacteria decreased with increasing concentration of FO NPs in PCL. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 2016.

  15. Washoe Tribe Alternative Energy Feasibility Study Final Report

    SciTech Connect

    Johnson, Jennifer

    2014-10-01

    The Washoe Tribe of Nevada and California was awarded funding to complete the Washoe Tribe Alternative Energy Feasibility Study project. The main goal of the project was to complete an alternative energy feasibility study. This study was completed to evaluate “the potential for development of a variety of renewable energy projects and to conduct an alternative energy feasibility study that determines which alternative energy resources have the greatest economic opportunity for the Tribe, while respecting cultural and environmental values” (Baker-Tilly, 2014). The study concluded that distributed generation solar projects are the best option for renewable energy development and asset ownership for the Washoe Tribe. Concentrating solar projects, utility scale wind projects, geothermal, and biomass resource projects were also evaluated during the study and it was determined that these alternatives would not be feasible at this time.

  16. Solid waste electrical generating feasibility study

    SciTech Connect

    Not Available

    1982-05-01

    The feasibility of recommissioning the existing 3 megawatt steam turbine driven electrical generator of the Municipal Utilities of Valley City, North Dakota, using steam generated in a new facility from the incineration of municipal solid waste generated in the area is examined. It is concluded that (1) there is sufficient municipal solid waste that can be obtained from Valley City, Moorhead and Jamestown (and/or West Fargo) to fuel the plant; (2) the seasonal fluctuation in the amounts of municipal solid waste indicates that a supplementary source of fuel for use during winter would increase plant efficiency; (3) the probable capital cost of the project will be $3,590,000.00; (4) the cost of production of electricity could range from 3.72 cents/kWh to 4.90 cents/kWh, depending on the construction costs, interest rate, lifetime of the project, availability for the plant and steam produced per ton of municipal solid waste; (5) there is no compelling reason why the tertiary cell of the sewage lagoon, cannot be used for cooling water; (6) the State Health Department is ambivalent toward the project; and (7) the public perception of the project is positive. The recommendations include (1) obtain the blessing of the appropriate authorities to proceed to the next steps; (2) obtain letters of intent to commit their municipal solid waste stream to this project from other municipalities; (3) develop a complete and detailed ''Request for Proposals'' based on demonstrated performance; and (4) explore vigorously the possibilities of grant monies to offset part of the cost. 92 refs., 29 figs., 6 tabs.

  17. Reduction of adipogenesis and lipid accumulation by Taraxacum officinale (Dandelion) extracts in 3T3L1 adipocytes: an in vitro study.

    PubMed

    González-Castejón, Marta; García-Carrasco, Belén; Fernández-Dacosta, Raquel; Dávalos, Alberto; Rodriguez-Casado, Arantxa

    2014-05-01

    In this in vitro study, we have investigated the ability of Taraxacum officinale (dandelion) to inhibit adipocyte differentiation and lipogenesis in 3T3-L1 preadipocytes. HPLC analysis of the three plant extracts used in this study-leaf and root extracts and a commercial root powder-identified caffeic and chlorogenic acids as the main phenolic constituents. Oil Red O staining and triglyceride levels analysis showed decreased lipid and triglyceride accumulation, respectively. Cytotoxicity was assessed with the MTT assay showing non-toxic effect among the concentrations tested. DNA microarray analysis showed that the extracts regulated the expression of a number of genes and long non-coding RNAs that play a major role in the control of adipogenesis. Taken together, our results indicate that the dandelion extracts used in this study may play a significant role during adipogenesis and lipid metabolism, and thus, supporting their therapeutic interest as potential candidates for the treatment of obesity.

  18. Final Report: Feasibility Study of Biomass in Snohomish County, Washington

    SciTech Connect

    Daryl Williams; Ray Clark

    2005-01-31

    This report and its attachments summarizes the results of a unique tribal-farmer cooperative study to evaluate the feasibility of building one or more regional anaerobic digestion systems in Snohomish County, Washington.

  19. Ute Mountain Ute Tribe Community-Scale Solar Feasibility Study

    SciTech Connect

    Rapp, Jim; Knight, Tawnie

    2014-01-30

    Parametrix Inc. conducted a feasibility study for the Ute Mountain Ute Tribe to determine whether or not a community-scale solar farm would be feasible for the community. The important part of the study was to find where the best fit for the solar farm could be. In the end, a 3MW community-scale solar farm was found best fit with the location of two hayfield sites.

  20. A comparative study of short- and long-TE 1H-MRS at 3T for in-vivo detection of 2-hydroxyglutarate in brain tumors

    PubMed Central

    Choi, Changho; Ganji, Sandeep; Hulsey, Keith; Madan, Akshay; Kovacs, Zoltan; Dimitrov, Ivan; Zhang, Song; Pichumani, Kumar; Mendelsohn, Dianne; Mickey, Bruce; Malloy, Craig; Bachoo, Robert; DeBerardinis, Ralph; Maher, Elizabeth

    2013-01-01

    2-hydroxyglutarate (2HG) is produced in gliomas with mutations of isocitrate dehydrogenases (IDH) 1 and 2. The 1H resonances of the J-coupled spins of 2HG are extensively overlapped with signals from other metabolites. Here we report a comparative study at 3T of the utility of the PRESS (point-resolved spectroscopy) sequence with a standard short TE (35 ms) and a long TE (97 ms) which had been theoretically designed for detecting the 2HG 2.25 ppm resonance. The performance of the methods is evaluated using data from phantoms, 7 healthy volunteers, and 22 subjects with IDH-mutated gliomas. The results indicate that TE = 97 ms provides higher detectability of 2HG than TE = 35 ms, and that this improved capability is gained when data are analyzed with basis spectra that include the effects of the volume localizing radio-frequency and gradient pulses. PMID:23592268

  1. Feasibility study: Assess the feasibility of siting a monitored retrievable storage facility. Phase 1

    SciTech Connect

    King, J.W.

    1993-08-01

    The purpose of phase one of this study are: To understand the waste management system and a monitored retrievable storage facility; and to determine whether the applicant has real interest in pursuing the feasibility assessment process. Contents of this report are: Generating electric power; facts about exposure to radiation; handling storage, and transportation techniques; description of a proposed monitored retrievable storage facility; and benefits to be received by host jurisdiction.

  2. Feasibility Study for Battle Mountain Renewable Energy Park

    SciTech Connect

    Hill, Donna

    2014-09-30

    The Feasibility Study for the Battle Mountain Renewable Energy Park project (“Feasibility Study”) will assess the feasibility, benefits and impacts of a 5 Mega Watt (MW) solar photovoltaic (PV) generating system (the “Solar Project” or “Energy Park”) on the Te-Moak Tribe of Western Shoshone Indians of Nevada Battle Mountain Colony in Battle Mountain, Nevada (NV). The Energy Park will provide power for export to utility off-takers and job training and employment for Tribal members and revenue for the Tribe. This Feasibility Study will be a collaborative effort between the Tribal government, consultants, Tribal members and stakeholders and will allow the Tribe to make informed decisions regarding the Solar Project.

  3. A pilot feasibility study of neurofeedback for children with autism.

    PubMed

    Steiner, Naomi J; Frenette, Elizabeth; Hynes, Caitlin; Pisarik, Elizabeth; Tomasetti, Kathryn; Perrin, Ellen C; Rene, Kirsten

    2014-06-01

    Neurofeedback (NFB) is an emerging treatment for children with autism spectrum disorder (ASD). This pilot study examined the feasibility of NFB for children with ASD. Ten children ages 7-12 with high functioning ASD and attention difficulties received a NFB attention training intervention. A standardized checklist captured feasibility, including focus during exercises and academic tasks, as well as off-task behaviors. Active behaviors and vocalizations were the most frequent off-task behaviors. Positive reinforcement and breaks including calm breathing exercises were the most common supports. Low motivation was associated with higher feasibility challenges, yet parental involvement and accommodations were helpful. This pilot study shows that it is feasible to conduct NFB sessions with children with high functioning autism and attention difficulties.

  4. Starr Ranch Renewable Energy Feasibility Study

    EPA Pesticide Factsheets

    Starr Ranch Renewable Energy success story is the summary of a renewable energy study by U.S. EPA Region 6. This publication summarizes the analyses to determine appropriate renewable energy options in Starr Ranch.

  5. Wind Generation Feasibility Study in Bethel, AK

    SciTech Connect

    Tom Humphrey, YKHC; Lance Kincaid, EMCOR Energy & Technologies

    2004-07-31

    This report studies the wind resources in the Yukon-Kuskokwim Health Corporation (YKHC) region, located in southwestern Alaska, and the applicability of wind generation technologies to YKHC facilities.

  6. Feasibility Study B-1 Power Controller.

    DTIC Science & Technology

    1979-11-01

    Study performed by the Autonetics Strategic Systems Division ( ASSD ) of Rockwell International on Contract N62269-79-C-0294. The objective of this study...Modify the design of the ASSD B-1 SSPC, Part Number 12880-507-1, to be a 115 Vac quadruple SSPC unit, with a SOSTEL compatible interface. 3.1.2 115 Vac...Primary Power Modifications. The ASSD SSPC Unit, Appendix A, contains four identical PC’s operating from 230 Vac primary power. Referring to Figure 1

  7. Energy Education Training Center--Feasibility Study.

    ERIC Educational Resources Information Center

    Mead, George R.; And Others

    Presented are findings and recommendations of a study conducted to determine the need for an Energy Education Training Center in the Columbia Plateau region of Oregon and Washington. Four sections comprise this report: (1) service area, (2) service population, (3) problem definition, and (4) proposed solution, the EETC. Information summarized in…

  8. World Languages and Cultures Feasibility Study

    ERIC Educational Resources Information Center

    Sklarz, David P.

    2013-01-01

    The purpose of the study was to conduct a comprehensive review of the research and best practices of exemplary elementary school World Language and Culture Programs. Specifically, (1) to assess the degree to which various program designs had most closely met the measurable goals of the American Council of Teachers of a Foreign Language, commonly…

  9. Automated Plasma Spray (APS) process feasibility study

    NASA Technical Reports Server (NTRS)

    Fetheroff, C. W.; Derkacs, T.; Matay, I. M.

    1981-01-01

    An automated plasma spray (APS) process was developed to apply two layer (NiCrAlY and ZrO2-12Y2O3) thermal barrier coatings to aircraft and stationary gas turbine engine blade airfoils. The APS process hardware consists of four subsystems: a mechanical positioning subsystem incorporating two interlaced six degree of freedom assemblies (one for coating deposition and one for coating thickness monitoring); a noncoherent optical metrology subsystem (for in process gaging of the coating thickness buildup at specified points on the specimen); a microprocessor based adaptive system controller (to achieve the desired overall thickness profile on the specimen); and commerical plasma spray equipment. Over fifty JT9D first stage aircraft turbine blade specimens, ten W501B utility turbine blade specimens and dozens of cylindrical specimens were coated with the APS process in preliminary checkout and evaluation studies. The best of the preliminary turbine blade specimens achieved an overall coating thickness uniformity of 53 micrometers (2.1 mils), much better than is achievable manually. Comparative evaluations of coating thickness uniformity for manually sprayed and APS coated specimens were performed. One of the preliminary turbine blade evaluation specimens was subjected to a torch test and metallographic evaluation. Some cylindrical specimens coated with the APS process survived up to 2000 cycles in subsequent burner rig testing.

  10. CsIX/TRU Grout Feasibility Study

    SciTech Connect

    S. J. Losinski; C. M. Barnes; B. K. Grover

    1998-11-01

    A settlement agreement between the Department of Energy (DOE) and the State of Idaho mandates that liquid waste now stored at the Idaho Nuclear Technology Engineering Center (INTEC - formerly the Idaho Chemical Processing Plant, ICPP) will be calcined by the end of year 2012. This study investigates an alternative treatment of the liquid waste that removes undissolved solids (UDS) by filtration and removes cesium by ion exchange followed by cement-based grouting of the remaining liquid into 55-gal drums. Operations are assumed to be from January 2008 through December 2012. The grouted waste will be contact-handled and will be shipped to the Waste Isolation Pilot Plant (WIPP) in New Mexico for disposal. The small volume of secondary wastes such as the filtered solids and cesium sorbent (resin) would remain in storage at the Idaho National Engineering and Environmental Laboratory for treatment and disposal under another project, with an option to dispose of the filtered solids as a r emote-handled waste at WIPP.

  11. A feasibility study of orbiter flight control experiments

    NASA Technical Reports Server (NTRS)

    Geissler, W. H.

    1978-01-01

    The results of a feasibility study of orbiter flight control experiments performed are summarized. Feasibility studies were performed on a group of 14 experiments selected from a candidate list of 35 submitted to the study contractor by the flight control community. Concepts and requirements were developed for the 14 selected experiments and they were ranked on a basis of technical value, feasibility, and cost. It was concluded that all the selected experiments can be considered as potential candidates for the Orbiter Experiment program, which is being formulated for the Orbiter Flight Tests and subsequent operational flights, regardless of the relative ranking established during the study. None of the selected experiments has significant safety implications and the cost of most was estimated to be less than $200K.

  12. Chinese/Japanese Input Feasibility Study. Final Technical Report.

    ERIC Educational Resources Information Center

    Desautels, John E.; And Others

    A study was conducted to determine the feasibility of developing an automatic Chinese/Japanese input device for a machine translation complex. A specific scanning technique to digitize Chinese/Japanese ideographs is recommended as a result of the study. Results of the study include specification of the resolution necessary to successfully digitize…

  13. Precipitation measurement using SIR-C: A feasibility study

    NASA Technical Reports Server (NTRS)

    Ahamad, Atiq; Moore, Richard K.

    1993-01-01

    A precipitation detection and measurement experiment is planned for the SIR-C/X-SAR mission. This study was conducted to determine under what conditions an off-nadir experiment is feasible. The signal-to-clutter ratio, the signal-to-noise ratio, and the minimum detectable rain rate were investigated. Available models, used in previous studies, were used for the surface clutter and the rain echo. The study also considers the attenuation of the returns at X band. It was concluded that an off-nadir rain-measurement experiment is feasible only for rain rates greater than 10 mm/hr for look angles greater than 60 deg. For the range of look angles 5 less than theta(sub 1) less than 50, the rain rate required is very high for adequate signal-to-clutter ratio, and hence the feasibility of the experiment.

  14. Metabolic alterations in medication-free patients with bipolar disorder: a 3T CSF-corrected magnetic resonance spectroscopic imaging study.

    PubMed

    Port, John D; Unal, Sencan S; Mrazek, David A; Marcus, Susan M

    2008-02-28

    The objective of this study was to determine whether cerebrospinal fluid(CSF)-corrected concentrations of N-acetylaspartate are lower in several brain regions of drug- and medication-free subjects with bipolar disorder as compared with matched healthy controls. Bipolar subjects (n=21) and age- and sex-matched healthy control (n=21) were studied using proton magnetic resonance spectroscopic imaging on a 3T magnetic resonance (MR) scanner. Spectra were quantified using the LCModel, and metabolite values were CSF-corrected to yield metabolite concentrations. Fourteen regions of interest and five metabolite concentrations in each subject were selected for statistical analysis. We found that bipolar subjects had significantly decreased N-acetylaspartate concentrations in both caudate heads and the left lentiform nucleus. Choline and creatine in the head of the right caudate were also significantly decreased in bipolar subjects. Significantly increased myo-inositol was found in the left caudate head in bipolar subjects. Bipolar subjects showed significantly decreased glutamate/glutamine concentrations in the frontal white matter bilaterally and in the right lentiform nucleus. No differences were found for other metabolites examined. These preliminary findings suggest decreased neuronal density or viability in the basal ganglia and neurometabolic abnormalities in the frontal lobes of subjects with bipolar disorder.

  15. Spectroscopic (FT-IR, FT-Raman) and quantum mechanical studies of 3t-pentyl-2r,6c-diphenylpiperidin-4-one thiosemicarbazone.

    PubMed

    Savithiri, S; Arockia doss, M; Rajarajan, G; Thanikachalam, V; Bharanidharan, S; Saleem, H

    2015-02-05

    In this study, the molecular structure and vibrational spectra of 3t-pentyl2r,6c-diphenylpiperidin-4-one thiosemicarbazone (PDPOTSC) were studied. The ground-state molecular geometry was ascertained by using the density functional theory (DFT)/B3LYP method using 6-31++G(d,p) as a basis set. The vibrational (FT-IR and FT-Raman) spectra of PDPOTSC were computed using DFT/B3LYP and HF methods with 6-31++G(d,p) basis set. The fundamental vibrations were assigned on the basis of the total energy distribution (TED⩾10%) of the vibrational modes, calculated with scaled quantum mechanics (SQM) methods PQS program. The electrical dipole moment (μ) and first hyperpolarizability (βo) values have been computed using DFT/B3LYP and HF methods. The calculated result (βo) shows that the title molecule might have nonlinear optical (NLO) behavior. Atomic charges of C, N, S and molecular electrostatic potential (MEP) were calculated using B3LYP/6-31G++(d,p). The HOMO-LUMO energies were calculated and natural bonding orbital (NBO) analysis has also been carried out.

  16. Spectroscopic (FT-IR, FT-Raman) and quantum mechanical studies of 3t-pentyl-2r,6c-diphenylpiperidin-4-one thiosemicarbazone

    NASA Astrophysics Data System (ADS)

    Savithiri, S.; Arockia doss, M.; Rajarajan, G.; Thanikachalam, V.; Bharanidharan, S.; Saleem, H.

    2015-02-01

    In this study, the molecular structure and vibrational spectra of 3t-pentyl2r,6c-diphenylpiperidin-4-one thiosemicarbazone (PDPOTSC) were studied. The ground-state molecular geometry was ascertained by using the density functional theory (DFT)/B3LYP method using 6-31++G(d,p) as a basis set. The vibrational (FT-IR and FT-Raman) spectra of PDPOTSC were computed using DFT/B3LYP and HF methods with 6-31++G(d,p) basis set. The fundamental vibrations were assigned on the basis of the total energy distribution (TED ⩾ 10%) of the vibrational modes, calculated with scaled quantum mechanics (SQM) methods PQS program. The electrical dipole moment (μ) and first hyperpolarizability (βo) values have been computed using DFT/B3LYP and HF methods. The calculated result (βo) shows that the title molecule might have nonlinear optical (NLO) behavior. Atomic charges of C, N, S and molecular electrostatic potential (MEP) were calculated using B3LYP/6-31G++(d,p). The HOMO-LUMO energies were calculated and natural bonding orbital (NBO) analysis has also been carried out.

  17. 78 FR 60291 - Investigational Device Exemptions for Early Feasibility Medical Device Clinical Studies...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-10-01

    ... ``Investigational Device Exemptions (IDEs) for Early Feasibility Medical Device Clinical Studies, Including Certain... facilitate early feasibility studies of medical devices, using appropriate risk mitigation strategies, under the IDE regulations. Early feasibility studies allow for limited early clinical evaluations of...

  18. 78 FR 23941 - Pilot Program for Early Feasibility Study Investigational Device Exemption Applications...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-04-23

    ... HUMAN SERVICES Food and Drug Administration Pilot Program for Early Feasibility Study Investigational... the Early Feasibility Study Investigational Device Exemption (IDE) Applications pilot program to May 8... ``Investigational Device Exemptions (IDE) for Early Feasibility Medical Device Clinical Studies, Including...

  19. Solar pond power plant feasibility study for Davis, California

    NASA Technical Reports Server (NTRS)

    Wu, Y. C.; Singer, M. J.; Marsh, H. E.; Harris, J.; Walton, A. L.

    1982-01-01

    The feasibility of constructing a solar pond power plant at Davis, California was studied. Site visits, weather data compilation, soil and water analyses, conceptual system design and analyses, a material and equipment market survey, conceptual site layout, and a preliminary cost estimate were studied. It was concluded that a solar pond power plant is technically feasible, but economically unattractive. The relatively small scale of the proposed plant and the high cost of importing salt resulted in a disproportionately high capital investment with respect to the annual energy production capacity of the plant. Cycle optimization and increased plant size would increase the economical attractiveness of the proposed concept.

  20. Feature-Oriented Domain Analysis (FODA) Feasibility Study

    DTIC Science & Technology

    1990-11-01

    S’S E L EJC rF MAY 2 4 199 C Feature-Oriented Domain Analysis ( FODA ) Feasibility Study Kyo C. Kang Sholom G. Cohen James A. Hess William E. Novak A...Oriented Domain Analysis ( FODA ) Feasibility Study Kyo C. Kang Sholom G. Cohen James A. Hess William E. Novak A. Spencer Peterson Domain Analysis Project...2.2.3. CTA Work 16 2.2.4. SPS Work 18 3. Overview of the Feature-Oriented Domain Analysis ( FODA ) Method 21 3.1. Method Concepts 21 3.1.1. Modelling

  1. Feasibility study of the Kafue Gorge Lower Hydroelectric Project: Feasibility report, executive summary. Export trade information

    SciTech Connect

    1995-05-01

    This study, conducted by Harza Engineering Company, was funded by the U.S. Trade and Development Agency. The primary objective of the feasibility study was to perform the technical, environmental, economic and financial studies to determine whether or not to proceed with the project. The report covers the preinvestment study that was conducted in 1976 to make comparisons from that period, as well as present and future electrical power demands in order to determine the kinds of equipment and structure needed if the project proceeds. This is the Executive Summary and is divided into the following sections: (1) Introduction; (2) Electric Power Sector; (3) Recommended Project; (4) Reservoir Operations Studies; (5) Construction Cost Estimates; (6) Economic Analysis; (7) Financial Analysis; (8) Expansion Program; (9) Environmental Assessment.

  2. Feasibility study ASCS remote sensing/compliance determination system

    NASA Technical Reports Server (NTRS)

    Duggan, I. E.; Minter, T. C., Jr.; Moore, B. H.; Nosworthy, C. T.

    1973-01-01

    A short-term technical study was performed by the MSC Earth Observations Division to determine the feasibility of the proposed Agricultural Stabilization and Conservation Service Automatic Remote Sensing/Compliance Determination System. For the study, the term automatic was interpreted as applying to an automated remote-sensing system that includes data acquisition, processing, and management.

  3. Center for Advanced Technology Training (CATT) Feasibility Study.

    ERIC Educational Resources Information Center

    Albuquerque Technical Vocational Inst., NM.

    A study of the feasibility of establishing a Center for Advanced Technology Training (CATT) at the Albuquerque Technical Vocational Institute (TVI Community College, New Mexico) was conducted by members of the Albuquerque business community, government representatives, and college administrators. Phase 1 of the study was an examination of the…

  4. Feasibility Study for an Automated Library System. Final Report.

    ERIC Educational Resources Information Center

    Beaumont and Associates, Inc.

    This study was initiated by the Newfoundland Public Library Services (NPLS) to assess the feasibility of automation for the library services and to determine the viability of an integrated automated library system for the NPLS. The study addresses the needs of NPLS in terms of library automation; benefits to be achieved through the introduction of…

  5. A Feasibility Study on Data Distribution on Optical Media.

    ERIC Educational Resources Information Center

    Campbell (Bonnie) & Associates, Toronto (Ontario).

    This feasibility study assesses the potential of optical technology in the development of accessible bibliographic and location data networks both in Canada and within the international MARC (Machine-Readable Cataloging) network. The study is divided into four parts: (1) a market survey of cataloging and interlibrary loan librarians to determine…

  6. Accuracy and uncertainty of asymmetric magnetization transfer ratio quantification for amide proton transfer (APT) imaging at 3T: a Monte Carlo study.

    PubMed

    Yuan, Jing; Zhang, Qinwei; Wang, Yi-Xiang; Wei, Juan; Zhou, Jinyuan

    2013-01-01

    Amide proton transfer (APT) imaging offers a novel and powerful MRI contrast mechanism for quantitative molecular imaging based on the principle of chemical exchange saturation transfer (CEST). Asymmetric magnetization transfer ratio (MTR(asym)) quantification is crucial for Z-spectrum analysis of APT imaging, but is still challenging, particularly at clinical field strength. This paper studies the accuracy and uncertainty in the quantification of MTR(asym) for APT imaging at 3T, by using high-order polynomial fitting of Z-spectrum through Monte Carlo simulation. Results show that polynomial fitting is a biased estimator that consistently underestimates MTR(asym). For a fixed polynomial order, the accuracy of MTR(asym) is almost constant with regard to signal-to-noise ratio (SNR) while the uncertainty decreases exponentially with SNR. The higher order polynomial fitting increases both the accuracy and the uncertainty of MTR(asym). For different APT signal intensity levels, the relative accuracy and the absolute uncertainty keep constant for a fixed polynomial order. These results indicate the limitations and pitfalls of polynomial fitting for MTR(asym) quantification so better quantification technique for MTR(asym) estimation is warranted.

  7. Genotoxicity and morphological transformation induced by cobalt nanoparticles and cobalt chloride: an in vitro study in Balb/3T3 mouse fibroblasts.

    PubMed

    Ponti, Jessica; Sabbioni, Enrico; Munaro, Barbara; Broggi, Francesca; Marmorato, Patrick; Franchini, Fabio; Colognato, Renato; Rossi, François

    2009-09-01

    Nanotechnology is an emerging field that involves the development, manufacture and measurement of materials and systems in the submicron to nanometer range. Its development is expected to have a large socio-economical impact in practically all fields of industrial activity. However, there is still a lack of information about the potential risks of manufactured nanoparticles for the environment and for human health. In this work, we studied the cytotoxicity, genotoxicity and morphological transforming activity of cobalt nanoparticles (Co-nano) and cobalt ions (Co(2+)) in Balb/3T3 cells. We also evaluated Co-nano dissolution in culture medium and cellular uptake of both Co-nano and Co(2+). Our results indicated dose-dependent cytotoxicity, assessed by colony-forming efficiency test, for both compounds. The toxicity was higher for Co-nano than for Co(2) after 2 and 24 h of exposure, while dose-effect relationships were overlapping after 72 h. Statistically significant results were observed for Co-nano with the micronucleus test and the comet assay, while for Co(2+) positive results were observed only with the latter. In addition, even when Co-nano was genotoxic (at >1 microM), no evident dose-dependent effect was observed. Concerning morphological transformation, we found a statistically significant increase in the formation of type III foci (morphologically transformed colonies) only for Co-nano. Furthermore, we observed a higher cellular uptake of Co-nano compared with Co(2+).

  8. Feasibility study of full-reactor gas core demonstration test

    NASA Technical Reports Server (NTRS)

    Kunze, J. F.; Lofthouse, J. H.; Shaffer, C. J.; Macbeth, P. J.

    1973-01-01

    Separate studies of nuclear criticality, flow patterns, and thermodynamics for the gas core reactor concept have all given positive indications of its feasibility. However, before serious design for a full scale gas core application can be made, feasibility must be shown for operation with full interaction of the nuclear, thermal, and hydraulic effects. A minimum sized, and hence minimum expense, test arrangement is considered for a full gas core configuration. It is shown that the hydrogen coolant scattering effects dominate the nuclear considerations at elevated temperatures. A cavity diameter of somewhat larger than 4 ft (122 cm) will be needed if temperatures high enough to vaporize uranium are to be achieved.

  9. Feasibility study of liquid pool burning in reduced gravity

    NASA Technical Reports Server (NTRS)

    Kanury, A. M.

    1979-01-01

    The feasibility of conducting experiments in the Spacelab on ignition and flame spread with liquid fuel pools which are initially at a temperature lower than the fuel's flash point temperature was studied. Theories were developed for the ignition and flame spread processes, and experiments were conducted to understand the factors influencing the ignition process and the spread rate. The results were employed to devise a conceptual Spacelab experiment which is expected to be feasible for a safe conduct and to be suitable for obtaining crucial data on the concerned processes.

  10. A feasibility study of a hypersonic real-gas facility

    NASA Technical Reports Server (NTRS)

    Gully, J. H.; Driga, M. D.; Weldon, W. F.

    1987-01-01

    A four month feasibility study of a hypersonic real-gas free flight test facility for NASA Langley Research Center (LARC) was performed. The feasibility of using a high-energy electromagnetic launcher (EML) to accelerate complex models (lifting and nonlifting) in the hypersonic, real-gas facility was examined. Issues addressed include: design and performance of the accelerator; design and performance of the power supply; design and operation of the sabot and payload during acceleration and separation; effects of high current, magnetic fields, temperature, and stress on the sabot and payload; and survivability of payload instrumentation during acceleration, flight, and soft catch.

  11. 75 FR 47525 - Notice of Funding Availability (NOFA) for Renewable Energy Feasibility Studies Grants Under the...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-08-06

    ... Feasibility Studies Grants Under the Rural Energy for America Program AGENCY: Rural Business-Cooperative... development assistance; and grants for conducting renewable energy feasibility studies. The Agency is...; Energy audit and renewable energy development assistance grants; and Renewable energy feasibility...

  12. 75 FR 77897 - Long Walk National Historic Trail Feasibility Study, Abbreviated Final Environmental Impact...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-12-14

    ... National Park Service Long Walk National Historic Trail Feasibility Study, Abbreviated Final Environmental... National Historic Trail Feasibility Study. SUMMARY: Pursuant to the National Environmental Policy Act of... Abbreviated Final Environmental Impact Statement for the Long Walk National Historic Trail Feasibility...

  13. THE COMMUNITY-APPRENTICESHIP PROGRAM, A FEASIBILITY STUDY.

    ERIC Educational Resources Information Center

    ISAACK, THOMAS S.

    A STUDY WAS CONDUCTED TO EXAMINE THE FEASIBILITY OF ESTABLISHING COMMUNITY APPRENTICESHIP PROGRAMS IN WEST VIRGINIA. THE CONCEPT IS THAT A WORKER IN ONE COMPANY WOULD UNDERTAKE ON THE JOB TRAINING AT ANOTHER COMPANY TO TAKE ADVANTAGE OF MACHINES AND EQUIPMENT NOT CURRENTLY OWNED BY HIS COMPANY. THE AUTHOR STATES THAT THIS WOULD UPGRADE THE WORK…

  14. Final Technical Report: Renewable Energy Feasibility Study and Resources Assessment

    SciTech Connect

    Rivero, Mariah

    2016-02-28

    In March 2011, the U.S. Department of Energy (DOE) awarded White Pine County, Nevada, a grant to assess the feasibility of renewable resource-related economic development activities in the area. The grant project included a public outreach and training component and was to include a demonstration project; however, the demonstration project was not completed due to lack of identification of an entity willing to locate a project in White Pine County. White Pine County completed the assessment of renewable resources and a feasibility study on the potential for a renewable energy-focused economic sector within the County. The feasibility study concluded "all resources studied were present and in sufficient quantity and quality to warrant consideration for development" and there were varying degrees of potential economic impact based on the resource type and project size. The feasibility study and its components were to be used as tools to attract potential developers and other business ventures to the local market. White Pine County also marketed the County’s resources to the renewable energy business community in an effort to develop contracts for demonstration projects. The County also worked to develop partnerships with local educational institutions, including the White Pine County School District, conducted outreach and training for the local community.

  15. Small modular biopower initiative Phase 1 feasibility studies executive summaries

    SciTech Connect

    Bain, R.

    2000-03-06

    The Phase 1 objective is a feasibility study that includes a market assessment, resource assessment, preliminary system design, and assessment of relevant environmental and safety considerations, and evaluation of financial and cost issues, and a preliminary business plan and commercialization strategy. Each participating company will share at least 20% of the cost of the first phase.

  16. 7 CFR 4280.178 - Scoring feasibility study grant applications.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... Energy for America Program General Renewable Energy System Feasibility Study Grants § 4280.178 Scoring... needs. (2) Energy generation. 15 points will be awarded if the proposed renewable energy system is... of 100 points possible. (a) Energy replacement or generation. The project can be for...

  17. 7 CFR 4280.178 - Scoring feasibility study grant applications.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... Energy for America Program General Renewable Energy System Feasibility Study Grants § 4280.178 Scoring... needs. (2) Energy generation. 15 points will be awarded if the proposed renewable energy system is... of 100 points possible. (a) Energy replacement or generation. The project can be for...

  18. 7 CFR 4280.178 - Scoring feasibility study grant applications.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... Energy for America Program General Renewable Energy System Feasibility Study Grants § 4280.178 Scoring... needs. (2) Energy generation. 15 points will be awarded if the proposed renewable energy system is... of 100 points possible. (a) Energy replacement or generation. The project can be for...

  19. Coeur d'Alene Tribe Energy Efficiency Feasibility Study

    SciTech Connect

    Allgood, Tiffany L.; Sorter, Andy

    2014-09-01

    The Coeur d'Alene Tribe's Energy Efficiency Feasibility Study (EEFS) is the culminating document that compiles the energy efficiency and building performance assessment and project prioritization process completed on 36 Tribally owned and operated facilities within Tribal lands. The EEFS contains sections on initial findings, utility billing analyses, energy conservation measures and prioritization and funding sources and strategies for energy project implementation.

  20. A Feasibility Study of Parent Awareness Programs. Final Report.

    ERIC Educational Resources Information Center

    Kemble, Virginia; And Others

    The purpose of this study was to explore the feasibility of group meetings of Head Start mothers that are focused on understanding of one's self and of others. A Parent Awareness Program was developed for use with two groups of Head Start mothers over a 27-week and a 17-week period, respectively. Specific objectives were that mothers would (1)…

  1. Embedding Resilience within the Tertiary Curriculum: A Feasibility Study

    ERIC Educational Resources Information Center

    Stallman, Helen M.

    2011-01-01

    Mental health problems can significantly impact on the ability of university students to both meet their individual potential and contribute positively within society. This study evaluates the feasibility of embedding a strength-focused resilience-building seminar within a university curriculum. Participants were 247 students enrolled in an…

  2. Feasibility Study of the Social Enterprise Intervention with Homeless Youth

    ERIC Educational Resources Information Center

    Ferguson, Kristin M.; Xie, Bin

    2008-01-01

    Objective: To reduce mental health symptoms and high-risk behaviors and increase social support and service utilization among street-living youth, the authors conducted a pilot study to assess the feasibility of the social enterprise intervention (SEI) at a homeless youth agency. Method: Convenience sampling was used to recruit 16 street-living…

  3. Improving Children's Formal Word Definitions: A Feasibility Study

    ERIC Educational Resources Information Center

    Marinellie, Sally A.

    2010-01-01

    The ability to define a word with accuracy and precision is an important skill that has been associated with academic achievement. This study investigated the feasibility of conducting a lesson on formal word definitions to improve children's definitional production. The participants were 18 children in grade 4 (mean age: 9 years; 8 months) who…

  4. Feasibility Study in the Collection of Adult Education Statistics.

    ERIC Educational Resources Information Center

    Simpson, J. A.

    This document is the report of a microstudy to determine the feasibility of collecting statistics on the present patterns of participation in adult education programs in Europe. The study was carried out in the city of Exeter in the United Kingdom. A sample questionnaire and the survey data obtained are included in this report which concludes that…

  5. Staging and storage facility feasibility study. Final report

    SciTech Connect

    Swenson, C.E.

    1995-02-01

    This study was performed to investigate the feasibility of adapting the design of the HWVP Canister Storage Building (CSB) to meet the needs of the WHC Spent Nuclear Fuel Project for Staging and Storage Facility (SSF), and to develop Rough Order of Magnitude (ROM) cost and schedule estimates.

  6. Distance Learning Enrollments in Independent Institutions. Feasibility Study.

    ERIC Educational Resources Information Center

    Washington State Higher Education Coordinating Board, Olympia.

    This study investigated the feasibility of collecting enrollment data on distance learning programs sponsored by private institutions within and outside of Washington State. E-commerce developments have allowed in-state independent providers and out-of-state public institutions to serve residents of Washington State, and many nontraditional…

  7. A Feasibility Study of Youth Apprenticeship in Arkansas.

    ERIC Educational Resources Information Center

    Jobs for the Future, Inc., West Somerville, MA.

    A study assessed the feasibility and attractiveness of youth apprenticeship in Arkansas in over 80 interviews with employers in 5 key Arkansas industries and occupations. They were allied health, food processing (equipment repair and maintenance and lab technician/quality control), information services, metalworking, and self-employment and…

  8. Multimodal imaging: Simultaneous EEG in a 3T Hybrid MR-PET system

    NASA Astrophysics Data System (ADS)

    Neuner, I.; Warbrick, T.; Tellmann, L.; Rota Kops, E.; Arrubla, J.; Boers, F.; Herzog, H.; Shah, N. J.

    2013-02-01

    The new generation of integrated MR-PET systems allows the simultaneous acquisition of MR and PET data. While MR delivers structural data with an excellent spatial resolution, the advantage of PET is its information on a molecular level. However, both modalities have a low temporal resolution. Thus, for pharmacological studies or patients who suffer from treatment resistant epilepsy the combination of yet another modality such as EEG could be desirable. We tested the feasibility of evoked visual potentials in a 3T Hybrid MR-PET system (Siemens Germany) in comparison to a standalone 3T Trio System (Siemens Germany). A T2*-weighted EPI sequence was used: TR: 2.2 s, TE: 30 ms, FOV: 200 mm, slice thickness 3, 36 slices in a healthy volunteer (male, 27 years old) using an MR-compatible 32-channel EEG system (Brainproducts, Munich, Germany). We applied 200 trials of visual stimulation from a white and black checkerboard. Visual evoked potentials were analyzed using Brain Vision Analyzer (Brainproducts, Munich, Germany). Gradient correction and cardioballistic artefact correction were performed as implemented in Vision Analyzer. Visual event related potentials were successfully recorded at the 3T Hybrid MR-PET system. Both curves differ slightly in shape and latency due to the following factors: the distance from the screen varies slightly and the size of the field of view of the subjects is smaller in the 3T MR-PET system in comparison to the 3T stand alone system. Extending the 3T MR-PET Hybrid system to 3T Hybrid MR-PET-EEG is feasible and adds another tool to clinical neuroimaging and research.

  9. Travelling wave magnetic resonance imaging at 3 T

    NASA Astrophysics Data System (ADS)

    Vazquez, F.; Martin, R.; Marrufo, O.; Rodriguez, A. O.

    2013-08-01

    Waveguides have been successfully used to generate magnetic resonance images at 7 T with whole-body systems. The bore diameter limits the magnetic resonance signal transmitted because its specific cut-off frequency is greater than the majority of resonant frequencies in magnetic resonance imaging and spectroscopy. This restriction can be overcome by using a parallel-plate waveguide whose cut-off frequency is zero for the transverse electromagnetic modes and it can propagate any frequency. To study the potential benefits of travelling-wave excitation for whole-body imaging at 3 T, we compare numerical simulations of the principal mode propagation for a parallel-plate waveguide filled with a cylindrical phantom and two surface coils for all simulations at 1.5 T, 3 T, 4.7, 7 T, and 9.4 T. The principal mode shows very little variation of the field magnitude along the propagation direction at 3 T when compared to other higher resonant frequencies. Unlike the standard method for travelling-wave magnetic resonance imaging, a parallel-plate waveguide prototype was built and used together with a whole-body birdcage coil for signal transmission and a pair of circular coils for reception. Experimental B1 mapping was computed to investigate the feasibility of this approach and, the point spread function method was used to measure the imager performance. Human leg images were acquired to experimentally validate this approach. The numerical magnetic field and specific absorption rate of a simulated leg were computed and results are within the safety limits. The B1 mapping and point spread function results showed that it is possible to conduct travelling-wave imaging experiments with good imager performance. Human leg images were also obtained with the whole-body birdcage coil for comparison purposes. The simulated and in vivo travelling-wave results of the human leg correspond very well for the signal received. A similar image signal-to-noise ratio was observed for the

  10. Synthesis, spectroscopic (FT-IR, FT-Raman, UV and NMR) and computational studies on 3t-pentyl-2r,6c-diphenylpiperidin-4-one semicarbazone

    NASA Astrophysics Data System (ADS)

    Arockia doss, M.; Savithiri, S.; Rajarajan, G.; Thanikachalam, V.; Saleem, H.

    2015-09-01

    The structural and spectroscopic studies of 3t-pentyl-2r,6c-diphenylpiperidin-4-one semicarbazone (PDPOSC) were made by adopting B3LYP/HF levels theory using 6-311++G(d,p) basis set. The FT-IR and Raman spectra were recorded in solid phase, the fundamental vibrations were assigned on the basis of the total energy distribution (TED) of the vibrational modes, calculated with scaled quantum mechanics (SQM) method and PQS program. DFT method indicates that B3LYP is superior to HF method for molecular vibrational analysis. UV-vis spectrum of the compound was recorded in different solvents in the region of 200-800 nm and the electronic properties such as excitation energies, oscillator strength, wavelengths, HOMO and LUMO energies were evaluated by time-dependent DFT (TD-DFT) approach. The polarizability and first order hyperpolarizability of the title molecule were calculated and interpreted. The hyperconjugative interaction energy (E(2)) and electron densities of donor (i) and acceptor (j) bonds were calculated using NBO analysis. In addition, MEP and atomic charges of carbon, nitrogen and oxygen were calculated using B3LYP/6-311++G(d,p) level theory. Moreover, thermodynamic properties of the title compound were calculated by B3LYP/HF, levels using 6-311++G(d,p) basis set. The 1H and 13C nuclear magnetic resonance (NMR) chemical shifts of the molecule were calculated by the gauge independent atomic orbital (GIAO) method and compared with experimental results.

  11. Synthesis, spectroscopic (FT-IR, FT-Raman, UV and NMR) and computational studies on 3t-pentyl-2r,6c-diphenylpiperidin-4-one semicarbazone.

    PubMed

    Arockia doss, M; Savithiri, S; Rajarajan, G; Thanikachalam, V; Saleem, H

    2015-09-05

    The structural and spectroscopic studies of 3t-pentyl-2r,6c-diphenylpiperidin-4-one semicarbazone (PDPOSC) were made by adopting B3LYP/HF levels theory using 6-311++G(d,p) basis set. The FT-IR and Raman spectra were recorded in solid phase, the fundamental vibrations were assigned on the basis of the total energy distribution (TED) of the vibrational modes, calculated with scaled quantum mechanics (SQM) method and PQS program. DFT method indicates that B3LYP is superior to HF method for molecular vibrational analysis. UV-vis spectrum of the compound was recorded in different solvents in the region of 200-800 nm and the electronic properties such as excitation energies, oscillator strength, wavelengths, HOMO and LUMO energies were evaluated by time-dependent DFT (TD-DFT) approach. The polarizability and first order hyperpolarizability of the title molecule were calculated and interpreted. The hyperconjugative interaction energy (E((2))) and electron densities of donor (i) and acceptor (j) bonds were calculated using NBO analysis. In addition, MEP and atomic charges of carbon, nitrogen and oxygen were calculated using B3LYP/6-311++G(d,p) level theory. Moreover, thermodynamic properties of the title compound were calculated by B3LYP/HF, levels using 6-311++G(d,p) basis set. The (1)H and (13)C nuclear magnetic resonance (NMR) chemical shifts of the molecule were calculated by the gauge independent atomic orbital (GIAO) method and compared with experimental results.

  12. 43 CFR 404.47 - How will a feasibility study be conducted under this program?

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 43 Public Lands: Interior 1 2014-10-01 2014-10-01 false How will a feasibility study be conducted... Studies § 404.47 How will a feasibility study be conducted under this program? Feasibility studies will be... feasibility study, including the Principles and Guidelines (incorporated by reference at § 404.4). You...

  13. 43 CFR 404.47 - How will a feasibility study be conducted under this program?

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 43 Public Lands: Interior 1 2010-10-01 2010-10-01 false How will a feasibility study be conducted... Studies § 404.47 How will a feasibility study be conducted under this program? Feasibility studies will be... feasibility study, including the Principles and Guidelines (incorporated by reference at § 404.4). You...

  14. Functional Laterality of Task-Evoked Activation in Sensorimotor Cortex of Preterm Infants: An Optimized 3 T fMRI Study Employing a Customized Neonatal Head Coil

    PubMed Central

    Smith-Collins, Adam PR; Müller, Nicole; Stegmann-Woessner, Gaby; Jankowski, Jacob; Gieseke, Jürgen; Born, Mark; Seitz, Hermann; Bartmann, Peter; Schild, Hans H.; Pruessmann, Klaas P.; Boecker, Henning

    2017-01-01

    Background Functional magnetic resonance imaging (fMRI) in neonates has been introduced as a non-invasive method for studying sensorimotor processing in the developing brain. However, previous neonatal studies have delivered conflicting results regarding localization, lateralization, and directionality of blood oxygenation level dependent (BOLD) responses in sensorimotor cortex (SMC). Amongst the confounding factors in interpreting neonatal fMRI studies include the use of standard adult MR-coils providing insufficient signal to noise, and liberal statistical thresholds, compromising clinical interpretation at the single subject level. Patients / methods Here, we employed a custom-designed neonatal MR-coil adapted and optimized to the head size of a newborn in order to improve robustness, reliability and validity of neonatal sensorimotor fMRI. Thirteen preterm infants with a median gestational age of 26 weeks were scanned at term-corrected age using a prototype 8-channel neonatal head coil at 3T (Achieva, Philips, Best, NL). Sensorimotor stimulation was elicited by passive extension/flexion of the elbow at 1 Hz in a block design. Analysis of temporal signal to noise ratio (tSNR) was performed on the whole brain and the SMC, and was compared to data acquired with an ‘adult’ 8 channel head coil published previously. Task-evoked activation was determined by single-subject SPM8 analyses, thresholded at p < 0.05, whole-brain FWE-corrected. Results Using a custom-designed neonatal MR-coil, we found significant positive BOLD responses in contralateral SMC after unilateral passive sensorimotor stimulation in all neonates (analyses restricted to artifact-free data sets = 8/13). Improved imaging characteristics of the neonatal MR-coil were evidenced by additional phantom and in vivo tSNR measurements: phantom studies revealed a 240% global increase in tSNR; in vivo studies revealed a 73% global and a 55% local (SMC) increase in tSNR, as compared to the ‘adult’ MR

  15. Feasibility Study of Compressive Sensing Underwater Imaging Lidar

    DTIC Science & Technology

    2014-03-28

    Compressive Sensing Underwater Imaging Lidar 5a. CONTRACT NUMBER 5b. GRANT NUMBER N00014-12-1-0921 5c. PROGRAM ELEMENT NUMBER 6...Feasibility study of Compressive Sensing Underwater Imaging Lidar Bing Ouyang phone: (772) 242-2288 fax : (772) 242-2257 email: bouvang@hboi.fau.edu...study of the frame based Compressive Sensing concept. ■ Another related project "Airborne Compressive Sensing Topographic Lidar " is being

  16. Encoal mild coal gasification project: Commercial plant feasibility study

    SciTech Connect

    1997-07-01

    In order to determine the viability of any Liquids from Coal (LFC) commercial venture, TEK-KOL and its partner, Mitsubishi Heavy Industries (MHI), have put together a technical and economic feasibility study for a commercial-size LFC Plant located at Zeigler Coal Holding Company`s North Rochelle Mine site. This resulting document, the ENCOAL Mild Coal Gasification Plant: Commercial Plant Feasibility Study, includes basic plant design, capital estimates, market assessment for coproducts, operating cost assessments, and overall financial evaluation for a generic Powder River Basin based plant. This document and format closely resembles a typical Phase II study as assembled by the TEK-KOL Partnership to evaluate potential sites for LFC commercial facilities around the world.

  17. Feasibility study on the thorium fueled boiling water breeder reactor

    SciTech Connect

    PetrusTakaki, N.

    2012-07-01

    The feasibility of (Th,U)O 2 fueled, boiling water breeder reactor based on conventional BWR technology has been studied. In order to determine the potential use of water cooled thorium reactor as a competitive breeder, this study evaluated criticality, breeding and void reactivity coefficient in response to changes made in MFR and fissile enrichments. The result of the study shows that while using light water as moderator, low moderator to fuel volume ratio (MFR=0.5), it was possible to breed fissile fuel in negative void reactivity condition. However the burnup value was lower than the value of the current LWR. On the other hand, heavy water cooled reactor shows relatively wider feasible breeding region, which lead into possibility of designing a core having better neutronic and economic performance than light water with negative void reactivity coefficient. (authors)

  18. 43 CFR 404.18 - How can I request assistance to conduct a feasibility study?

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... feasibility study? 404.18 Section 404.18 Public Lands: Interior Regulations Relating to Public Lands BUREAU OF... request assistance to conduct a feasibility study? To request assistance to conduct a feasibility study... submit a full proposal to conduct a feasibility study in response to the program announcement,...

  19. 43 CFR 404.18 - How can I request assistance to conduct a feasibility study?

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... feasibility study? 404.18 Section 404.18 Public Lands: Interior Regulations Relating to Public Lands BUREAU OF... request assistance to conduct a feasibility study? To request assistance to conduct a feasibility study... submit a full proposal to conduct a feasibility study in response to the program announcement,...

  20. A feasibility study: Forest Fire Advanced System Technology (FFAST)

    NASA Technical Reports Server (NTRS)

    Mcleod, R. G.; Martin, T. Z.; Warren, J.

    1983-01-01

    The National Aeronautics and Space Administration/Jet Propulsion Laboratory and the United States Department of Agriculture Forest Service completed a feasibility study that examined the potential uses of advanced technology in forest fires mapping and detection. The current and future (1990's) information needs in forest fire management were determined through interviews. Analysis shows that integrated information gathering and processing is needed. The emerging technologies that were surveyed and identified as possible candidates for use in an end to end system include ""push broom'' sensor arrays, automatic georeferencing, satellite communication links, near real or real time image processing, and data integration. Matching the user requirements and the technologies yielded a ""strawman'' system configuration. The feasibility study recommends and outlines the implementation of the next phase for this project, a two year, conceptual design phase to define a system that warrants continued development.

  1. Remedial Investigation/Feasibility Study/Interim Response Actions

    DTIC Science & Technology

    1988-03-25

    BASESEOLIECHNICAL.EROGRAL.ELAN 1- 12 1.4.1 Assumptions 1- 12 1.4.2 RI/FS Process 1-13 1.4.3 Records of Decision 1-22 2.0 RI/EA/FS PROCESS 2-1 2.1 OVERVIEW 2-1 2.2...oL.Basin.I 3-6 3.3.1.4 Clasure-oLAbandoned..Weliiaon-.BIA 3-7 3.3.1.5 laasts &lirk-rauud.. atar -antercept and-.Ireatment-.SYstem 3-7 3.3.2 Soils and...10 5.4 UEASIIIIILSIUDLSCHEDULE 5- 12 5.4.1 Onpost Feasibility Study 5- 12 5.4.2 Onpost Feasibility Study Deadlines 5- 12 5.4.3 Onpost RI/FS Report

  2. Numerical aerodynamic simulation facility feasibility study, executive summary

    NASA Technical Reports Server (NTRS)

    1979-01-01

    There were three major issues examined in the feasibility study. First, the ability of the proposed system architecture to support the anticipated workload was evaluated. Second, the throughput of the computational engine (the flow model processor) was studied using real application programs. Third, the availability, reliability, and maintainability of the system were modeled. The evaluations were based on the baseline systems. The results show that the implementation of the Numerical Aerodynamic Simulation Facility, in the form considered, would indeed be a feasible project with an acceptable level of risk. The technology required (both hardware and software) either already exists or, in the case of a few parts, is expected to be announced this year.

  3. Autonomous surgical robotics using 3-D ultrasound guidance: feasibility study.

    PubMed

    Whitman, John; Fronheiser, Matthew P; Ivancevich, Nikolas M; Smith, Stephen W

    2007-10-01

    The goal of this study was to test the feasibility of using a real-time 3D (RT3D) ultrasound scanner with a transthoracic matrix array transducer probe to guide an autonomous surgical robot. Employing a fiducial alignment mark on the transducer to orient the robot's frame of reference and using simple thresholding algorithms to segment the 3D images, we tested the accuracy of using the scanner to automatically direct a robot arm that touched two needle tips together within a water tank. RMS measurement error was 3.8% or 1.58 mm for an average path length of 41 mm. Using these same techniques, the autonomous robot also performed simulated needle biopsies of a cyst-like lesion in a tissue phantom. This feasibility study shows the potential for 3D ultrasound guidance of an autonomous surgical robot for simple interventional tasks, including lesion biopsy and foreign body removal.

  4. Feasibility Study of Optically Transparent Microstrip Patch Antenna

    NASA Technical Reports Server (NTRS)

    Simons, Rainee N.; Lee, Richard Q.

    1997-01-01

    The paper presents a feasibility study on optically transparent patch antennas with microstrip line and probe feeds. The two antennas operate at 2.3 GHz and 19.5 GHz respectively. They are constructed from a thin sheet of clear polyester with an AgHT-8 optically transparent conductive coating. The experimental results show good radiation patterns and input impedance match. The antennas have potential applications in mobile wireless communications.

  5. A Feasibility Study on Bird Classification with Neural Network.

    DTIC Science & Technology

    signal which is generated by the Flycatcher tracking radar has a relationship with the wing stroke pattern of a bird. An automatic system to classify...birds using the AGC signal could be used in a bird collision warning system. Such a system does not yet exist. A prototype of a bird classification...expensive to be done in the framework of a feasibility study. According to the test results it is recommended to acquire real AGC data.

  6. Technical Feasibility Study for Zero Energy K-12 Schools

    SciTech Connect

    Bonnema, Eric; Goldwasser, David; Torcellini, Paul; Pless, Shanti; Studer, Daniel

    2016-11-01

    This technical feasibility study provides documentation and research results supporting a possible set of strategies to achieve source zero energy K-12 school buildings as defined by the U.S. Department of Energy (DOE) zero energy building (ZEB) definition (DOE 2015a). Under this definition, a ZEB is an energy-efficient building in which, on a source energy basis, the actual annual delivered energy is less than or equal to the on-site renewable exported energy.

  7. Feasibility Studies in IP Videoconferencing, Streaming, and Wireless Communication

    PubMed Central

    Locatis, Craig; Fontelo, Paul; Ackerman, Michael; Sneiderman, Charles

    2002-01-01

    Two feasibility studies were undertaken to determine how to use video streaming with other technologies over IP. One involved wireless technology to stream video live from the 2001 AMIA Symposium in Washington, DC. The other involved simultaneously webcasting a multipoint videoconference to a viewing audience that could communicate with the conference panelist using chat. The results of these tests are reported along with recommendations for further experiments. The outcomes have implications for the use of broadband synchronous communication in distance learning.

  8. Feasibility study for the development of low temperature curing adhesives

    NASA Technical Reports Server (NTRS)

    Green, H. E.; Sutherland, J. D.; Sheppard, C. H.

    1974-01-01

    The feasibility of a new approach for the development of stable, easily handled, room temperature (293 K - 311 K) curing adhesives was studied and demonstrated. The work concentrated on a family of unsaturated amide/ester resins. Twelve candidate resins were synthesized and tested for completeness of cure at room temperature, adhesion to aluminum and titanium, shear strength, moisture resistance and heat stability. The three most promising candidate resins were selected and recommended for further development.

  9. Elastography using harmonic ultrasonic imaging: a feasibility study.

    PubMed

    Desai, Raghavendra Reddy; Krouskop, Thomas A; Righetti, Raffaella

    2010-04-01

    Tissue Harmonic Imaging (THI) is a relatively new modality that has had a significant impact in the ultrasound field. In the recent past, imaging the mechanical properties of tissues using elastography has also gained great interest. In this paper, we investigate the feasibility of combining these two state-of-the-art ultrasound-imaging modalities. The performance of elastograms obtained using harmonic ultrasonic signals is studied with simulations and compared to the performance of conventional elastograms using standard statistical methods. Experiments are used as a proof of the technical feasibility of generating tissue-harmonic elastograms using experimental harmonic signals. The results of our simulation study indicate that all image quality factors considered in this study (elastographic signal-to-noise ratio, elastographic contrast-to-noise ratio and spatial resolution) may be improved when using harmonic ultrasonic signals, provided that the ultrasound system is characterized by high bandwidth, high sampling frequency and large lateral sampling. Preliminary experimental results suggest that it is technically feasible to generate experimental elastograms using harmonic signals, provided that the sonographic signal-to-noise ratio of the pre- and postcompression harmonic frames is sufficiently high to guarantee reliable values of correlation.

  10. Feasibility Study for a Hopi Utility-Scale Wind Project

    SciTech Connect

    Kendrick Lomayestewa

    2011-05-31

    The goal of this project was to investigate the feasibility for the generation of energy from wind and to parallel this work with the development of a tribal utility organization capable of undertaking potential joint ventures in utility businesses and projects on the Hopi reservation. The goal of this project was to investigate the feasibility for the generation of energy from wind and to parallel this work with the development of a tribal utility organization capable of undertaking potential joint ventures in utility businesses and projects on the Hopi reservation. Wind resource assessments were conducted at two study sites on Hopi fee simple lands located south of the city of Winslow. Reports from the study were recently completed and have not been compared to any existing historical wind data nor have they been processed under any wind assessment models to determine the output performance and the project economics of turbines at the wind study sites. Ongoing analysis of the wind data and project modeling will determine the feasibility of a tribal utility-scale wind energy generation.

  11. Will patients accept randomization to psychoanalysis? A feasibility study.

    PubMed

    Caligor, Eve; Hilsenroth, Mark J; Devlin, Michael; Rutherford, Bret R; Terry, Madeleine; Roose, Steven P

    2012-04-01

    The feasibility of using a randomized design in a psychoanalytic outcome study was evaluated. Our hypothesis was that it would be feasible to randomize patients to psychoanalysis three or four times weekly on the couch for five years, supportive expressive therapy once or twice weekly for up to forty sessions, and cognitive behavior therapy once or twice weekly for up to forty sessions. Successful randomization was defined as a 30% recruitment rate among eligible patients. Recruitment began in September 2009 and closed in April 2010. A total of 132 subjects responded to study advertisements, 107 of whom (81%) were triaged out. The remaining 25 were scheduled for the first of two clinical interviews, and 21 of 25 (88%) completed the interview. Eleven of the 25 (44%) were determined to be eligible based on inclusion and exclusion criteria. Eight of the 11 accepted the idea of randomization and completed the diagnostic assessment phase. Calculated on the basis of 8 of 11 eligible patients accepting randomization, the 95% confidence interval was that 39% to 92% of eligible subjects would participate in a larger study of this design. Our findings support the feasibility of implementing an RCT comparing psychoanalysis as defined by the American Psychoanalytic Association (three or four times weekly on the couch for approximately five years) with shorter-term dynamic or cognitive behavioral therapy once or twice a week. Pre-treatment characteristics of these eight patients are presented, as are initial reliability data for the treatment adherence scales used in this trial.

  12. PUEBLO OF ZIA RENEWABLE ENERGY DEVELOPMENT FEASIBILITY STUDY

    SciTech Connect

    Pino, Peter M.; Lakshman, Jai; Toole, G. Loren; Witcher, James; Emerson, Michael A.; Turner, Jeremy; Sandidge, Wendy

    2014-06-30

    The Pueblo of Zia will conduct a comprehensive feasibility study for best-use application(s) for development of renewable energy resources on its tribally held TRUST lands (i.e., Trust Lands of Zia Indian Reservation). The feasibility study is essential for determining the technical and economic viability of a future renewable project(s) on Zia tribal lands, including the potential economic and environmental benefits for the Tribe. Project Objectives: The feasibility study is essential for determining the technical and economic viability of future renewable project(s) on Zia tribal lands, including the potential economic and environmental benefits for the Tribe to: 1. Provide a balanced local renewable power supply for Zia Pueblo, its members, tribal offices, schools and buildings, and businesses on tribal lands 2. Provide a firm power supply for export and commercial market distribution 3. Provide economic development for the Tribe and its members, including job training and creation, each in accordance with the goals and objectives as conveyed by the Pueblo of Zia Tribal Council, Tribal Administration, and outlined in The Pueblo of Zia Comprehensive Plan and Pueblo of Zia — Zia Enterprise Zone Master Plan. A key goal of the study is to analyze the integrated development of solar, geothermal, and wind renewable energy resources at Zia Pueblo, with added potential to combine gas-fired generation to accomplish energy firming. Geothermal offers a base load source of energy, providing power continuously for end users. Wind and solar offer intermediate and peaking sources of energy, which can be harvested throughout the day, with periods of variable but predicable output. Variability will be managed in an integrated manner, using Zia Pueblo's combined renewable resources to generate high-quality power. Tasks are intended to collect, catalog, map, and analyze existing data on Zia Pueblo's renewable energy resource base and then match resource attributes with the most

  13. Market assessment and technical feasibility study of PFBC ash use

    SciTech Connect

    Smith, V.E.; Bland, A.E.; Brown, T.H.; Georgiou, D.N.; Wheeldon, J.

    1994-10-01

    The overall objectives of this study are to determine the market potential and the technical feasibility of using PFBC ash in high volume ash use applications. The information will be of direct use to the utility industry in assessing the economics of PFBC power generation in light of ash disposal avoidance through ash marketing. In addition, the research is expected to result in the generation of generic data on the use of PFBC ash that could lead to novel processing options and procedures. The specific objectives of the proposed research and demonstration effort are: Define resent and future market potential of PFBC ash for a range of applications (Phase I); assess the technical feasibility of PFBC ash use in construction, civil engineering and agricultural applications (Phase II); and demonstrate the most promising of the market and ash use options in full-scale field demonstrations (Phase III).

  14. Design Feasibility Study of a Space Station Freedom Truss

    NASA Technical Reports Server (NTRS)

    Armand, Sasan C.; Dohogne, Caroline A.

    1992-01-01

    Here, the focus is on the design and configuration feasibility of the short spacer for the Space Station Program in its launch configuration. The product of this study is being used by Rockwell International (Rocketdyne Division) as they continue their design concept of the current short spacer configuration. It is anticipated that the launch loads will dominate the on-orbit loads and dictate the design configuration of the short spacer. At the present time, the on-orbit loads have not been generated. The structural analysis discussed herein is based on the transient events derived from the Space Transportation System (STS) Interface Control Document (ICD). The transient loading events consist of liftoff loads, landing loads, and emergency landing loads. The quasi-static loading events have been neglected, since the magnitude of the acceleration factors are lower than the transient acceleration factors. The normal mode analyses presented herein are based on the most feasible configurations with acceptable stress ranges.

  15. Design feasibility study of a Space Station Freedom truss

    NASA Astrophysics Data System (ADS)

    Armand, Sasan C.; Dohogne, Caroline A.

    1992-04-01

    Here, the focus is on the design and configuration feasibility of the short spacer for the Space Station Program in its launch configuration. The product of this study is being used by Rockwell International (Rocketdyne Division) as they continue their design concept of the current short spacer configuration. It is anticipated that the launch loads will dominate the on-orbit loads and dictate the design configuration of the short spacer. At the present time, the on-orbit loads have not been generated. The structural analysis discussed herein is based on the transient events derived from the Space Transportation System (STS) Interface Control Document (ICD). The transient loading events consist of liftoff loads, landing loads, and emergency landing loads. The quasi-static loading events have been neglected, since the magnitude of the acceleration factors are lower than the transient acceleration factors. The normal mode analyses presented herein are based on the most feasible configurations with acceptable stress ranges.

  16. Pascua Yaqui Tribe Renewable Energy Development and Deployment Feasibility Study

    SciTech Connect

    Arvayo, Maria

    2014-05-30

    In 2012, PYT was awarded a grant from the Department of Energy Tribal Energy Program to conduct a Renewable Energy Development and Deployment Feasibility Study that would define the technical and economic viability of renewable energy on tribal lands. Red Mountain Energy Partners (RMEP) was hired by PYT to complete the study. Through this study, Red Mountain concluded that there are viable opportunities for solar at Tortuga Ranch, the Casino del Sol and a third site near the Justice Center on Camino de Oeste.

  17. Feasibility Study Of Sea Surface Currents Measurements With Doppler Scatterometers

    NASA Astrophysics Data System (ADS)

    Fabry, P.; Recchia, A.; de Kloe, J.; Stoffelen, A.; Husson, R.; Collard, F.; Chapron, B.; Mouche, A.; Enjolras, V.; Johannessen, J.; Lin, C. C.; Fois, F.

    2013-12-01

    We present the activity carried out in the framework of the ESA GSP study called "Feasibility Investigation of Global Ocean Surface Current Mapping using ERS, MetOp and QuikScat Wind Scatterometer” (DOPSCAT). The study was aimed at assessing the potential of scatterometer instruments for sea surface current vector retrieval under the strong requirements of preserving both the swath and the surface wind vector estimation performances offered by the existing scatterometers. The paper describes the main results obtained during the DOPSCAT study and provides some recommendations for this new instrument concept.

  18. Dual-Mission Large Aircraft Feasibility Study and Aerodynamic Investigation

    NASA Technical Reports Server (NTRS)

    Mavris, Dimitri

    1997-01-01

    A Dual-Mission Large Aircraft, or DMLA, represents the possibility of a single aircraft capable of fulfilling both a Global Reach Aircraft (GRA) and Very Large Transport (VLT) roles. The DMLA, by combining the GRA and VLT into a single new aircraft, could possibly lower the aircraft manufacturer's production costs through the resulting increase in production quantity. This translates into lower aircraft acquisition costs, a primary concern for both the Air Force and commercial airlines. This report outlines the first steps taken in this study, namely the assessment of technical and economic feasibility of the DMLA concept. In the course of this project, specialized GRA and VLT aircraft were sized for their respective missions, using baseline conventional (i.e., lacking advanced enabling technologies) aircraft models from previous work for the Air Force's Wright Laboratory and NASA-Langley. DMLA baseline aircraft were then also developed, by first sizing the aircraft for the more critical of the two missions and then analyzing the aircraft's performance over the other mission. The resulting aircraft performance values were then compared to assess technical feasibility. Finally, the life-cycle costs of each aircraft (GRA, VLT, and DMLA) were analyzed to quantify economic feasibility. These steps were applied to both a two-engine aircraft set, and a four-engine aircraft set.

  19. Feasibility study for mega-electron-volt electron beam tomography

    SciTech Connect

    Hampel, U.; Baertling, Y.; Hoppe, D.; Kuksanov, N.; Fadeev, S.; Salimov, R.

    2012-09-15

    Electron beam tomography is a promising imaging modality for the study of fast technical processes. But for many technical objects of interest x rays of several hundreds of keV energy are required to achieve sufficient material penetration. In this article we report on a feasibility study for fast electron beam computed tomography with a 1 MeV electron beam. The experimental setup comprises an electrostatic accelerator with beam optics, transmission target, and a single x-ray detector. We employed an inverse fan-beam tomography approach with radiographic projections being generated from the linearly moving x-ray source. Angular projections were obtained by rotating the object.

  20. Feasibility study for mega-electron-volt electron beam tomography.

    PubMed

    Hampel, U; Bärtling, Y; Hoppe, D; Kuksanov, N; Fadeev, S; Salimov, R

    2012-09-01

    Electron beam tomography is a promising imaging modality for the study of fast technical processes. But for many technical objects of interest x rays of several hundreds of keV energy are required to achieve sufficient material penetration. In this article we report on a feasibility study for fast electron beam computed tomography with a 1 MeV electron beam. The experimental setup comprises an electrostatic accelerator with beam optics, transmission target, and a single x-ray detector. We employed an inverse fan-beam tomography approach with radiographic projections being generated from the linearly moving x-ray source. Angular projections were obtained by rotating the object.

  1. Feasibility Study of ϕ(1020) Production at NICA

    NASA Astrophysics Data System (ADS)

    Yordanova, Lyubka

    2016-01-01

    The goal of this article is to provide overview of the new accelerator complex NICA at JINR and to present the current results of the Multi-Purpose Detector (MPD) performance for ϕ-meson production. In our study we use the channel decay ϕ→ K+K- to detect the formation of the ϕ-meson. UrQMD event generator is used and central events at√s = 11 GeV are analyzed. The obtained values of the parameters from the invariant mass distribution are consistent with the PDG values. This study shows that the measurement of ϕ-meson is feasible at NICA/MPD.

  2. Feasibility study for a numerical aerodynamic simulation facility: Summary

    NASA Technical Reports Server (NTRS)

    Lincoln, N. R.

    1979-01-01

    The Ames Research Center of NASA is engaged in the development and investigation of numerical methods and computer technologies to be employed in conjunction with physical experiments, particularly utilizing wind tunnels in the furtherance of the field of aircraft and aerodynamic body design. Several studies, aimed primarily at the areas of development and production of extremely high-speed computing facilities, were conducted. The studies focused on evaluating the aspects of feasibility, reliability, costs, and practicability of designing, constructing, and bringing into effect production of a special-purpose system. An executive summary of the activities for this project is presented in this volume.

  3. Feasibility Study for Operable Unit 7-13/14

    SciTech Connect

    K. Jean Holdren Thomas E. Bechtold Brian D. Preussner

    2007-05-29

    The Subsurface Disposal Area is a radioactive waste landfill located within the Radioactive Waste Management Complex at the Idaho National Laboratory Site in southeastern Idaho. This Feasibility Study for Operable Unit 7-13/14 analyzes options for mitigating risks to human health and the environment associated with the landfill. Analysis is conducted in accordance with the Comprehensive Environmental Response, Compensation, and Liability Act, using nine evaluation criteria to develop detailed and comparative analysis of five assembled alternatives. Assembled alternatives are composed of discrete modules. Ultimately, decision-makers will select, recombine, and sum various modules into an optimized preferred alternative and final remedial decision.

  4. Ear-EEG from generic earpieces: a feasibility study.

    PubMed

    Kidmose, P; Looney, D; Jochumsen, L; Mandic, D P

    2013-01-01

    The use of brain monitoring based on EEG, in natural environments and over long time periods, is hindered by the limited portability of current wearable systems, and the invasiveness of implanted systems. To that end, we introduce an ear-EEG recording device based on generic earpieces which meets key patient needs (discreet, unobstrusive, user-friendly, robust) and that is low-cost and suitable for off-the-shelf use; thus promising great advantages for healthcare applications. Its feasibility is validated in a comprehensive comparative study with our established prototype, based on a personalized earpiece, for a key EEG paradigm.

  5. Feasibility study of a microprocessor based oculometer system

    NASA Technical Reports Server (NTRS)

    Varanasi, M. R.

    1981-01-01

    The elimination of redundancy in data to maximize processing speed and minimize storage requirements were objectives in a feasibility study of a microprocessor based oculometer system that would be portable in size and flexible in use. The appropriate architectural design of the signal processor, improved optics, and the reduction of size, weight, and power to the system were investigated. A flow chart is presented showing the strategy of the design. The simulation for developing microroutines for the high speed algorithmic processor subsystem is discussed as well as the Karhunen-Loeve transform technique for data compression.

  6. Feasibility Study of Biomass Electrical Generation on Tribal Lands

    SciTech Connect

    Tom Roche; Richard Hartmann; Joohn Luton; Warren Hudelson; Roger Blomguist; Jan Hacker; Colene Frye

    2005-03-29

    The goals of the St. Croix Tribe are to develop economically viable energy production facilities using readily available renewable biomass fuel sources at an acceptable cost per kilowatt hour ($/kWh), to provide new and meaningful permanent employment, retain and expand existing employment (logging) and provide revenues for both producers and sellers of the finished product. This is a feasibility study including an assessment of available biomass fuel, technology assessment, site selection, economics viability given the foreseeable fuel and generation costs, as well as an assessment of the potential markets for renewable energy.

  7. Feasibility Study: Potential Enhancements for the LLNL Renewables Website

    SciTech Connect

    Kearns, F; Krawchuk, M; Moritz, M; Stephens, S; Goldstein, N

    2008-01-25

    This feasibility study investigates additional improvements/extensions to the LLNL Renewables Website. Currently, the Renewables Website focuses on wind energy in California. Future enhancements will include other renewable energy sources. The extensions described below are focused along two separate yet related avenues: (1) Forecasting wildfire risk in the regions of California where new development may occur, as a part of the 'Million Solar Roofs' program. (2) Gaining a better understanding of the ecological components and potential of biofuels from forests in California. These two avenues are further described in the report. Following is a technical description of the Center for Fire Research and Outreach computing and web service capabilities.

  8. Feasibility study for the United Heckathorn Superfund Site, Richmond, California

    SciTech Connect

    Lincoff, A.H.; Costan, G.P.; Montgomery, M.S.; White, P.J.

    1994-07-01

    The United Heckathom Superfund Site in Richmond, California, was used to formulate pesticides from approximately 1947 to 1966. Soils at the site and sediments in the harbor were contaminated with various chlorinated pesticides, primarily DDT, as a result of these activities. The US Environmental Protection Agency listed the site on the Superfund National Priorities List in 1990. This document is part of the Remedial Investigation and Feasibility Study phase of the Superfund response, which will provide the basis for selection of a final remedy that will protect human health and the environment and achieve compliance with federal and state envirorunental laws.

  9. Feasibility Study of a Satellite Solar Power Station

    NASA Technical Reports Server (NTRS)

    Glaser, P. E.; Maynard, O. E.; Mackovciak, J. J. R.; Ralph, E. I.

    1974-01-01

    A feasibility study of a satellite solar power station (SSPS) was conducted to: (1) explore how an SSPS could be flown and controlled in orbit; (2) determine the techniques needed to avoid radio frequency interference (RFI); and (3) determine the key environmental, technological, and economic issues involved. Structural and dynamic analyses of the SSPS structure were performed, and deflections and internal member loads were determined. Desirable material characteristics were assessed and technology developments identified. Flight control performance of the SSPS baseline design was evaluated and parametric sizing studies were performed. The study of RFI avoidance techniques covered (1) optimization of the microwave transmission system; (2) device design and expected RFI; and (3) SSPS RFI effects. The identification of key issues involved (1) microwave generation, transmissions, and rectification and solar energy conversion; (2) environmental-ecological impact and biological effects; and (3) economic issues, i.e., costs and benefits associated with the SSPS. The feasibility of the SSPS based on the parameters of the study was established.

  10. Southern thailand coal fired project: Feasibility study. Export trade information

    SciTech Connect

    1995-09-01

    This study, conducted by Black & Veatch International, was funded by the U.S. Trade and Development Agency. The report addresses various technical, environmental, and economic aspects of developing four 1,000 MW units of coal fired electric generating facilities at a site near Prachuap Khiri Khan. The study includes a cost estimate for the units and the fuel delivery port as well as the major conceptual design decisions made for the project. This volume of the report is the Feasibility Study and is divided into the following sections: (1) Introduction/Summary; (2) Generation Planning Study; (3) Site Selection Study; (4) Project Description; (5) Fuel Resource Assessment; (6) Water Resource Assessment; (7) Technical Information to Support the Environmental Impact Assessment; (8) Plant Conceptual Design; (9) Transmission Interconnection; (10) Project Capital Cost Estimate; (11) Project Schedule; (12) Project Implementation Plan; (13) Project Risk Analysis.

  11. Feasibility study of algae-based Carbon Dioxide capture ...

    EPA Pesticide Factsheets

    SUMMARY: The biomass of microalgae contains approximately 50% carbon, which is commonly obtained from the atmosphere, but can also be taken from commercial sources that produce CO2, such as coal-fired power plants. A study of operational demonstration projects is being undertaken to evaluate the benefits of using algae to reduce CO2 emissions from industrial and small-scale utility power boilers. The operations are being studied for the use of CO2 from flue gas for algae growth along with the production of biofuels and other useful products to prepare a comprehensive characterization of the economic feasibility of using algae to capture CO2. Information is being generated for analyses of the potential for these technologies to advance in the market and assist in meeting environmental goals, as well as to examine their associated environmental implications. Three electric power generation plants (coal and fuel oil fired) equipped to send flue-gas emissions to algae culture at demonstration facilities are being studied. Data and process information are being collected and developed to facilitate feasibility and modeling evaluations of the CO2 to algae technology. An understanding of process requirements to apply this technology to existing industries would go far in advancing carbon capture opportunities. Documenting the successful use of this technology could help bring “low-tech”, low-cost, CO2 to algae, carbon capture to multiple size industries and

  12. Intensive Cognitive Therapy for PTSD: A Feasibility Study

    PubMed Central

    Ehlers, Anke; Clark, David M.; Hackmann, Ann; Grey, Nick; Liness, Sheena; Wild, Jennifer; Manley, John; Waddington, Louise; McManus, Freda

    2010-01-01

    Background: Cognitive Behaviour Therapy (CBT) of anxiety disorders is usually delivered in weekly or biweekly sessions. There is evidence that intensive CBT can be effective in phobias and obsessive compulsive disorder. Studies of intensive CBT for posttraumatic stress disorder (PTSD) are lacking. Method: A feasibility study tested the acceptability and efficacy of an intensive version of Cognitive Therapy for PTSD (CT-PTSD) in 14 patients drawn from consecutive referrals. Patients received up to 18 hours of therapy over a period of 5 to 7 working days, followed by 1 session a week later and up to 3 follow-up sessions. Results: Intensive CT-PTSD was well tolerated and 85.7 % of patients no longer had PTSD at the end of treatment. Patients treated with intensive CT-PTSD achieved similar overall outcomes as a comparable group of patients treated with weekly CT-PTSD in an earlier study, but the intensive treatment improved PTSD symptoms over a shorter period of time and led to greater reductions in depression. Conclusions: The results suggest that intensive CT-PTSD is a feasible and promising alternative to weekly treatment that warrants further evaluation in randomized trials. PMID:20573292

  13. Fusion Guidance in Endovascular Peripheral Artery Interventions: A Feasibility Study

    SciTech Connect

    Sailer, Anna M. Haan, Michiel W. de Graaf, Rick de Zwam, Willem H. van; Schurink, Geert Willem H.; Nelemans, Patricia J.; Wildberger, Joachim E. Das, Marco

    2015-04-15

    PurposeThis study was designed to evaluate the feasibility of endovascular guidance by means of live fluoroscopy fusion with magnetic resonance angiography (MRA) and computed tomography angiography (CTA).MethodsFusion guidance was evaluated in 20 endovascular peripheral artery interventions in 17 patients. Fifteen patients had received preinterventional diagnostic MRA and two patients had undergone CTA. Time for fluoroscopy with MRA/CTA coregistration was recorded. Feasibility of fusion guidance was evaluated according to the following criteria: for every procedure the executing interventional radiologists recorded whether 3D road-mapping provided added value (yes vs. no) and whether PTA and/or stenting could be performed relying on the fusion road-map without need for diagnostic contrast-enhanced angiogram series (CEAS) (yes vs. no). Precision of the fusion road-map was evaluated by recording maximum differences between the position of the vasculature on the virtual CTA/MRA images and conventional angiography.ResultsAverage time needed for image coregistration was 5 ± 2 min. Three-dimensional road-map added value was experienced in 15 procedures in 12 patients. In half of the patients (8/17), intervention was performed relying on the fusion road-map only, without diagnostic CEAS. In two patients, MRA roadmap showed a false-positive lesion. Excluding three patients with inordinate movements, mean difference in position of vasculature on angiography and MRA/CTA road-map was 1.86 ± 0.95 mm, implying that approximately 95 % of differences were between 0 and 3.72 mm (2 ± 1.96 standard deviation).ConclusionsFluoroscopy with MRA/CTA fusion guidance for peripheral artery interventions is feasible. By reducing the number of CEAS, this technology may contribute to enhance procedural safety.

  14. A Feasibility Study of Using Hybrid Collimation for Nuclear Environment.

    PubMed

    Meng, L J; Wehe, D K

    2003-08-01

    This paper presents a feasibility of a gamma ray imager using combined electronic and mechanical collimation methods. This detector is based on the use of a multiple pinhole collimator, a position sensitive scintillation detector with Anger logic readout. A pixelated semiconductor detector, located between the collimator and the scintillation detector, is used as a scattering detector. For gamma rays scattered in the first detector and then stopped in the second detector, an image can also be built up based on the joint probability of their passing through the collimator and falling into a broadened conical surface, defined by the detected Compton scattering event. Since these events have a much smaller angular uncertainty, they provide more information content per photon compared with using solely the mechanical or electronic collimation. Therefore, the overall image quality can be improved. This feasibility study adapted a theoretical approach, based on analysing the resolution-variance trade-off in images reconstructed using Maximum a priori (MAP) algorithm. The effect of factors such as the detector configuration, Doppler broadening and collimator configuration are studied. The results showed that the combined collimation leads to a significant improvement in image quality at energy range below 300keV. However, due to the mask penetration, the performance of such a detector configuration is worse than a standard Compton camera at above this energy.

  15. A Feasibility Study of Using Hybrid Collimation for Nuclear Environment

    PubMed Central

    Meng, L J; Wehe, D. K.

    2016-01-01

    This paper presents a feasibility of a gamma ray imager using combined electronic and mechanical collimation methods. This detector is based on the use of a multiple pinhole collimator, a position sensitive scintillation detector with Anger logic readout. A pixelated semiconductor detector, located between the collimator and the scintillation detector, is used as a scattering detector. For gamma rays scattered in the first detector and then stopped in the second detector, an image can also be built up based on the joint probability of their passing through the collimator and falling into a broadened conical surface, defined by the detected Compton scattering event. Since these events have a much smaller angular uncertainty, they provide more information content per photon compared with using solely the mechanical or electronic collimation. Therefore, the overall image quality can be improved. This feasibility study adapted a theoretical approach, based on analysing the resolution-variance trade-off in images reconstructed using Maximum a priori (MAP) algorithm. The effect of factors such as the detector configuration, Doppler broadening and collimator configuration are studied. The results showed that the combined collimation leads to a significant improvement in image quality at energy range below 300keV. However, due to the mask penetration, the performance of such a detector configuration is worse than a standard Compton camera at above this energy. PMID:28260807

  16. Magnetic Resonance Elastography of Uterine Leiomyomas: A Feasibility Study

    PubMed Central

    Stewart, Elizabeth A.; Taran, F. Andrei; Chen, Jun; Gostout, Bobbie S.; Woodrum, David A.; Felmlee, Joel P.; Ehman, Richard L.

    2010-01-01

    Objective To determine the feasibility of performing in vivo magnetic resonance elastography (MRE) for uterine leiomyoma. Design Pilot study Setting Academic Medical Center Patients Six subjects planning surgical excision of uterine leiomyomas. Intervention MRE prior to planned surgery Main Outcome Measures Achieving an appropriate phase signal to noise ratio (PSNR) in the leiomyoma to allow assessment of leiomyoma elasticity in kilo pascals (kPa). Results MRE was successful in all subjects for uteri ranging from 100 to over 1000 grams. Subjects had body mass indices (BMIs) ranging from 23.0 to 38.0 kg/m2. Appropriate PSNR ranging from 5.45 to 42.28 were achieved for leiomyomas in all subjects. Mean elasticity of uterine leiomyomas ranged from 3.95 to 6.68 kPa. Conclusion(s) MRE is a feasible technique for studying the in vivo mechanical properties of uterine leiomyomas and demonstrates significant heterogeneity in elasticity between lesions. Further work is necessary to optimize the technique and understand the clinical utility of this technique for women with uterine leiomyomas. PMID:20633880

  17. Florida Tech CubeSat Experiment Feasibility Study

    NASA Technical Reports Server (NTRS)

    Arrasmith, William W.; Bucaille, Stephane; Rusovici, Razvan; Platt, Don; Guidry, Todd; Bandar, Deepika; Coots, Everett; Davidson, Russ

    2010-01-01

    CubeSats are a relatively new type of satellite. Smaller than long-term (5+ year life expectancy) satellites, these pico-satellites are comparatively cheap, small (10x10x10 cm), and are very versatile. Universities world-wide are using CubeSats to conduct a variety of experiments in space without the need for a large experimental platform. Today CubeSats are considered to be one of the most effective ways to send a small payload into space and has attracted the attention of many educational and non-profit organizations. As this pico-satellite model continues to gain penetration into the satellite build and launch industry, it is expected that more governmental, educational, and commercial interests will emerge. As an example, more of the space-related items of high interest to the National Science Foundation may be tackled with a CubeSat platform resulting in lower life cycle costs than traditional satellite options. NASA LSP, in cooperation with the Florida Institute of Technology, has initiated a feasibility study to investigate the technical aspects of measuring and transferring vibration, acceleration, temperature, and video data from a CubeSat to NASA Hanger AE on Cape Canaveral Air Force Station (CCAFS) a.k.a. Kennedy Space Center (KSC). This report provides a technical feasibility analysis to determine whether-or-not a specific set of NASA/LSP requirements can be accomplished. Our approach has been to provide a "notional" component layout to determine the feasibility of the NASA/LSP stakeholder requirements. The notional layout is used to consider component level technical issues such as size, weight, & power (SWaP), bandwidth, and other critical technical parameters. Even though the notional components may satisfy the stated requirements and thereby demonstrate feasibility, the notional layout is NOT considered a design since no component optimization and design trade-off analysis has taken place. This activity should be accomplished in an appropriate

  18. Space station tracking requirements feasibility study, volume 2

    NASA Technical Reports Server (NTRS)

    Udalov, Sergei; Dodds, James

    1988-01-01

    The objective of this feasibility study is to determine analytically the accuracies of various sensors being considered as candidates for Space Station use. Specifically, the studies were performed whether or not the candidate sensors are capable of providing the required accuracy, or if alternate sensor approaches should be investigated. Other topics related to operation in the Space Station environment were considered as directed by NASA-JSC. The following topics are addressed: (1) Space Station GPS; (2) Space Station Radar; (3) Docking Sensors; (4) Space Station Link Analysis; (5) Antenna Switching, Power Control, and AGC Functions for Multiple Access; (6) Multichannel Modems; (7) FTS/EVA Emergency Shutdown; (8) Space Station Information Systems Coding; (9) Wanderer Study; and (10) Optical Communications System Analysis. Brief overviews of the abovementioned topics are given. Wherever applicable, the appropriate appendices provide detailed technical analysis. The report is presented in two volumes. This is Volume 2, containing Appendices K through U.

  19. Space station tracking requirements feasibility study, volume 1

    NASA Technical Reports Server (NTRS)

    Udalov, Sergei; Dodds, James

    1988-01-01

    The objective of this feasibility study is to determine analytically the accuracies of various sensors being considered as candidates for Space Station use. Specifically, the studies were performed whether or not the candidate sensors are capable of providing the required accuracy, or if alternate sensor approaches be investigated. Other topics related to operation in the Space Station environment were considered as directed by NASA-JCS. The following topics are addressed: (1) Space Station GPS; (2) Space Station Radar; (3) Docking Sensors; (4) Space Station Link Analysis; (5) Antenna Switching, Power Control, and AGC Functions for Multiple Access; (6) Multichannel Modems; (7) FTS/EVA Emergency Shutdown; (8) Space Station Information Systems Coding; (9) Wanderer Study; and (10) Optical Communications System Analysis. Brief overviews of the abovementioned topics are given. Wherever applicable, the appropriate appendices provide detailed technical analysis. The report is presented in two volumes. This is Volume 1, containing the main body and Appendices A through J.

  20. Battery energy storage market feasibility study -- Expanded report

    SciTech Connect

    Kraft, S.; Akhil, A.

    1997-09-01

    Under the sponsorship of the US Department of Energy`s Office of Utility Technologies, the Energy Storage Systems Analysis and Development Department at Sandia National Laboratories (SNL) contracted Frost and Sullivan to conduct a market feasibility study of energy storage systems. The study was designed specifically to quantify the battery energy storage market for utility applications. This study was based on the SNL Opportunities Analysis performed earlier. Many of the groups surveyed, which included electricity providers, battery energy storage vendors, regulators, consultants, and technology advocates, viewed battery storage as an important technology to enable increased use of renewable energy and as a means to solve power quality and asset utilization issues. There are two versions of the document available, an expanded version (approximately 200 pages, SAND97-1275/2) and a short version (approximately 25 pages, SAND97-1275/1).

  1. Long life feasibility study for the shuttle infrared telescope facility

    NASA Technical Reports Server (NTRS)

    1985-01-01

    A study was conducted to assess the feasibility of designing an Infrared Telescope of the 1 meter class which would operate effectively as a Shuttleborne, 14-day Spacelab payload and then be adapted with little modification to work as a 6 month Space station or free flyer payload. The optics configuration and requirements from a previous study were used without modification. In addition, an enhancement to 2 year mission lengths was studied. The cryogenic system selected was a hybrid design with an internal solid Hydrogen tank at 8 Kelvin and an internal superfluid tank at 2K. In addition to the cryogenic design, a detailed look at secondary mirror actuators for chopping, focus and decenter was conducted and analysis and cryo test reported.

  2. Direct solar pumping of semiconductor lasers: A feasibility study

    NASA Technical Reports Server (NTRS)

    Anderson, Neal G.

    1991-01-01

    The primary goals of the feasibility study are the following: (1) to provide a preliminary assessment of the feasibility of pumping semiconductor lasers in space directly focused sunlight; and (2) to identify semiconductor laser structures expected to operate at the lowest possible focusing intensities. It should be emphasized that the structures under consideration would provide direct optical-to-optical conversion of sunlight into laser light in a single crystal, in contrast to a configuration consisting of a solar cell or battery electrically pumping a current injection laser. With external modulation, such lasers may prove to be efficient sources for intersatellite communications. We proposed to develop a theoretical model of semiconductor quantum-well lasers photopumped by a broadband source, test it against existing experimental data where possible, and apply it to estimating solar pumping requirements and identifying optimum structures for operation for operation at low pump intensities. This report outlines our progress toward these goals. Discussion of several technical details are left to the attached summary abstract.

  3. Anticipatory precrash restraint sensor feasibility study: Final report

    SciTech Connect

    Kercel, S.W.; Dress, W.B.

    1995-08-01

    This report explores feasibility of an anticipatory precrash restraint sensor. The foundation principle is the anticipation mechanism found at a primitive level of biological intelligence and originally formalized by the mathematical biologist Robert Rosen. A system based on formal anticipatory principles should significantly outperform conventional technologies. It offers the prospect of high payoff in prevention of death and injury. Sensors and processes are available to provide a good, fast, and inexpensive description of the present dynamical state of the vehicle to the embedded system model in the anticipation engine. The experimental part of this study found that inexpensive radar in a real-world setting does return useful data on target dynamics. The data produced by a radar system can be converted to target dynamical information by good, fast and inexpensive signal-processing techniques. Not only is the anticipatory sensor feasible, but further development under the sponsorship of the National Highway Traffic Safety Administration is necessary and desirable. There are a number of possible lines of follow-on investigation. The level of effort and expected benefits of various alternatives are discussed.

  4. A feasibility study for a manufacturing technology deployment center

    SciTech Connect

    Not Available

    1994-10-31

    The Automation & Robotics Research Institute (ARRI) and the Texas Engineering Extension Service (TEEX) were funded by the U.S. Department of Energy to determine the feasibility of a regional industrial technology institute to be located at the Superconducting Super Collider (SSC) Central Facility in Waxahachie, Texas. In response to this opportunity, ARRI and TEEX teamed with the DOE Kansas City Plant (managed by Allied Signal, Inc.), Los Alamos National Laboratory (managed by the University of California), Vought Aircraft Company, National Center for Manufacturing Sciences (NCMS), SSC Laboratory, KPMG Peat Marwick, Dallas County Community College, Navarro Community College, Texas Department of Commerce (TDOC), Texas Manufacturing Assistance Center (TMAC), Oklahoma Center for the Advancement of Science and Technology, Arkansas Science and Technology Authority, Louisiana Productivity Center, and the NASA Mid-Continent Technology Transfer Center (MCTTC) to develop a series of options, perform the feasibility analysis and secure industrial reviews of the selected concepts. The final report for this study is presented in three sections: Executive Summary, Business Plan, and Technical Plan. The results from the analysis of the proposed concept support the recommendation of creating a regional technology alliance formed by the states of Texas, New Mexico, Oklahoma, Arkansas and Louisiana through the conversion of the SSC Central facility into a Manufacturing Technology Deployment Center (MTDC).

  5. Conoscopic holography for image registration: a feasibility study

    NASA Astrophysics Data System (ADS)

    Lathrop, Ray A.; Cheng, Tiffany T.; Webster, Robert J., III

    2009-02-01

    Preoperative image data can facilitate intrasurgical guidance by revealing interior features of opaque tissues, provided image data can be accurately registered to the physical patient. Registration is challenging in organs that are deformable and lack features suitable for use as alignment fiducials (e.g. liver, kidneys, etc.). However, provided intraoperative sensing of surface contours can be accomplished, a variety of rigid and deformable 3D surface registration techniques become applicable. In this paper, we evaluate the feasibility of conoscopic holography as a new method to sense organ surface shape. We also describe potential advantages of conoscopic holography, including the promise of replacing open surgery with a laparoscopic approach. Our feasibility study investigated use of a tracked off-the-shelf conoscopic holography unit to perform a surface scans on several types of biological and synthetic phantom tissues. After first exploring baseline accuracy and repeatability of distance measurements, we performed a number of surface scan experiments on the phantom and ex vivo tissues with a variety of surface properties and shapes. These indicate that conoscopic holography is capable of generating surface point clouds of at least comparable (and perhaps eventually improved) accuracy in comparison to published experimental laser triangulation-based surface scanning results.

  6. Wind height distribution influence on offshore wind farm feasibility study

    NASA Astrophysics Data System (ADS)

    Benassai, Guido; Della Morte, Renata; Matarazzo, Antonio; Cozzolino, Luca

    2015-04-01

    The economic feasibility of offshore wind power utilization depends on the favourable wind conditions offshore as compared to sites on land. The higher wind speeds have to compensate the additional cost of offshore developments. However, not only the mean wind speed is different, but the whole flow regime, as can be seen in the vertical wind speed profile. The commonly used models to describe this profile have been developed mainly for land sites, so they have to be verified on the basis of field data. Monin-Obukhov theory is often used for the description of the wind speed profile at a different height with respect to a measurement height. Starting from the former, , the profile is predicted using two parameters, Obukhov length and sea surface roughness. For situations with near-neutral and stable atmospheric stratification and long (>30km) fetch, the wind speed increase with height is larger than what is predicted from Monin-Obukhov theory. It is also found that this deviation occurs at wind speeds important for wind power utilization, mainly at 5-9 ms-1. In the present study the influence of these aspects on the potential site productivity of an offshore wind farm were investigated, namely the deviation from the theory of Monin-Obukhov due to atmospheric stability and the influence of the fetch length on the Charnock model. Both these physical effects were discussed and examined in view of a feasibility study of a site for offshore wind farm in Southern Italy. Available data consisted of time histories of wind speeds and directions collected by National Tidegauge Network (Rete Mareografica Nazionale) at the height of 10m a.s.l. in ports. The theory of Monin-Obukhov was used to extrapolate the data to the height of the wind blades, while the Charnock model was used to extend the wind speed on the sea surface from the friction velocity on the ground. The models described were used to perform calculations for a feasibility study of an offshore wind farm in Southern

  7. Percutaneous Transcatheter Aortic Disc Valve Prosthesis Implantation: A Feasibility Study

    SciTech Connect

    Sochman, Jan

    2000-09-15

    Purpose: Over the past 30 years there have been experimental efforts at catheter-based management of aortic valve regurgitation with the idea of extending treatment to nonsurgical candidates. A new catheter-based aortic valve design is described.Methods: The new catheter-delivered valve consists of a stent-based valve cage with locking mechanism and a prosthetic flexible tilting valve disc. The valve cage is delivered first followed by deployment and locking of the disc. In acute experiments, valve implantation was done in four dogs.Results: Valve implantation was successful in all four animals. The implanted valve functioned well for the duration of the experiments (up to 3 hr).Conclusion: The study showed the implantation feasibility and short-term function of the tested catheter-based aortic disc valve. Further experimental studies are warranted.

  8. Feasibility Study for an Asymmetric B Factory Based on PEP

    SciTech Connect

    Chattapadhyay, A.; Hitlin, D.; Porter, F.; Chin, Y.H.; Dell'Orco, D.; Forest, E.; Furman, M.; Garren, A.A.; Hoyer, E.; Kennedy, K.; Lambertson, G.; Lo, C.C.; Nishimura, H.; Oddone, P.; Ronan, M.; Sessler, A.; Taylor, B.; Taylor, C.; Zisman, M.; Barletta, W.; Allen, M.; Bloom, E.; Burke, D.; Cornacchia, M.; Davies-White, D.; Destaebler, H.; Donald, M.H.; Dorfan, J.; Feldman, G.; Rees, J.; Schsarz, H.; Sullivan, M.; Autin, B.; Tennyson, J.; Barbson, B.; Oide, K.

    1989-10-26

    This report addresses the feasibility of designing and constructing an asymmetric B-factory based on the PEP storage ring at SLAC that can ultimately reach a luminosity of 1 X 10{sup 34} cm{sup -2}s{sup -1}. Such a facility, operating at the {gamma}(4S) resonance, could be used to study mixing, rate decays, and CP violation in the B{bar B} system, and could also study tau and charm physics. The essential accelerator physics, engineering, and technology issues that must be addressed to successfully build this exciting and challenging facility are identified, and possible solutions, or R and D that will reasonable lead to such solutions, are described.

  9. Feasibility study of a commercial irradiation plant in Morocco

    NASA Astrophysics Data System (ADS)

    Marfak, T.

    2002-03-01

    On the basis of a market survey, Centre National de l'Energie, des Sciences et des Techniques Nucléaires carried out a feasibility study of a commercial irradiation facility, identified the principal products which will be retained for the industrial applications and evaluated the projection of their volumes for the next five years. The site implementation of the irradiation plant is defined according to the national nuclear regulation and respecting the end users requirements. The costs of the irradiation services and the transport have been discussed and accepted by the industrials. This study shows that all the conditions are regrouped now in Morocco to introduce the irradiation technology to the industrial scale.

  10. Autonomous Aerobraking: A Design, Development, and Feasibility Study

    NASA Technical Reports Server (NTRS)

    Prince, Jill L. H.; Powell, Richard W.; Murri, Dan

    2011-01-01

    Aerobraking has been used four times to decrease the apoapsis of a spacecraft in a captured orbit around a planetary body with a significant atmosphere utilizing atmospheric drag to decelerate the spacecraft. While aerobraking requires minimum fuel, the long time required for aerobraking requires both a large operations staff, and large Deep Space Network resources. A study to automate aerobraking has been sponsored by the NASA Engineering and Safety Center to determine initial feasibility of equipping a spacecraft with the onboard capability for autonomous aerobraking, thus saving millions of dollars incurred by a large aerobraking operations workforce and continuous DSN coverage. This paper describes the need for autonomous aerobraking, the development of the Autonomous Aerobraking Development Software that includes an ephemeris estimator, an atmospheric density estimator, and maneuver calculation, and the plan forward for continuation of this study.

  11. Feasibility study for a secondary Na/S battery

    NASA Technical Reports Server (NTRS)

    Abraham, K. M.; Schiff, R.; Brummer, S. B.

    1979-01-01

    The feasibility of a moderate temperature Na battery was studied. This battery is to operate at a temperature in the range of 100-150 C. Two kinds of cathode were investigated: (1) a soluble S cathode consisting of a solution of Na2Sn in an organic solvent and (2) an insoluble S cathode consisting of a transition metal dichalcogenide in contact with a Na(+)ion conducting electrolyte. Four amide solvents, dimethyl acetamide, diethyl acetamide, N-methyl acetamide and acetamide, were investigated as possible solvents for the soluble S cathode. Results of stability and electrochemical studies using these solvents are presented. The dialkyl substituted amides were found to be superior. Although the alcohol 1,3-cyclohexanediol was found to be stable in the presence of Na2Sn at 130 C, its Na2Sn solutions did not appear to have suitable electrochemical properties.

  12. Feasibility study of modern airships. Phase 2: Executive summary

    NASA Technical Reports Server (NTRS)

    1977-01-01

    A feasibility study of modern airships has been completed. Three promising modern airship systems' concepts and their associated missions were studied; (1) a heavy-lift airship, employing a non-rigid hull and a significant amount of rotor lift, used for short-range transport and positioning of heavy military and civil payloads, (2) a VTOL (vertical take-off and landing), metalclad, partially buoyant airship used as a short-haul commercial transport; and (3) a class of fully-buoyant airships used for long-endurance Navy missions. The heavy-lift airship concept offers a substantial increase in vertical lift capability over existing systems and is projected to have lower total operating costs per ton-mile. The VTOL airship transport concept appears to be economically competitive with other VTOL aircraft concepts but can attain significantly lower noise levels. The fully-buoyant airship concept can provide an airborne platform with long endurance that satisfies many Navy mission requirements.

  13. Tissue type characterization using photoacoustic power spectrum, a feasibility study

    NASA Astrophysics Data System (ADS)

    Tavakoli, Behnoosh; Goldstein, Seth D.; Kang, Jin U.; Choti, Michaal; Boctor, Emad M.

    2015-03-01

    The development of technologies capable of non-invasive characterization of tissue has the potential to significantly improve diagnostic and therapeutic medical interventions. In this study we investigated the feasibility of a noninvasive photoacoustic (PA) approach for characterizing biological tissues. The measurement was performed in the transmission mode with a wideband hydrophone while a tunable Q-switched Nd:YAG pulsed laser was used for illumination. The power spectrum of photoacoustic signal induced by a pulsed laser light from tissue was analyzed and features were extracted to study their correlation with tissue biomechanical properties. For a controlled study, tissue mimicking gelatin phantoms with different densities and equivalent optical absorptions were used as targets. The correlation between gelatin concentration of such phantoms and their mechanical properties were validated independently with a dynamic mechanical analyzer capable of calculating complex loss and storage moduli between two compression plates. It was shown that PA spectrums were shifted towards higher frequencies by increasing gelatin concentration. In order to quantify this effect, signal energy in two intervals of low and high frequency ranges were calculated. Gelatin concentration was correlated with PA energy in high frequency range with R2=0.94. Subsequently, PA signals generated from freshly resected human thyroid specimens were measured and analyzed in a similar fashion. We found that in aggregate, malignant thyroid tissue contains approximately 1.6 times lower energy in the high frequency range in comparison to normal thyroid tissue (p<0.01). This ratio increased with increasing illumination wavelength from 700 nm to 900nm. In summary, this study demonstrated the feasibility of using photoacoustic technique for characterizing tissue on the basis of viscoelastic properties of the tissue.

  14. Direct solar pumping of semiconductor lasers: A feasibility study

    NASA Technical Reports Server (NTRS)

    Anderson, Neal G.

    1992-01-01

    This report describes results of NASA Grant NAG-1-1148, entitled Direct Solar Pumping of Semiconductor Lasers: A Feasibility Study. The goals of this study were to provide a preliminary assessment of the feasibility of pumping semiconductor lasers in space with directly focused sunlight and to identify semiconductor laser structures expected to operate at the lowest possible focusing intensities. It should be emphasized that the structures under consideration would provide direct optical-to-optical conversion of sunlight into laser light in a single crystal, in contrast to a configuration consisting of a solar cell or storage battery electrically pumping a current injection laser. With external modulation, such lasers could perhaps be efficient sources for intersatellite communications. We proposed specifically to develop a theoretical model of semiconductor quantum-well lasers photopumped by a broadband source, test it against existing experimental data where possible, and apply it to estimating solar pumping requirements and identifying optimum structures for operation at low pump intensities. These tasks have been accomplished, as described in this report of our completed project. The report is organized as follows: Some general considerations relevant to the solar-pumped semiconductor laser problem are discussed in Section 2, and the types of structures chosen for specific investigation are described. The details of the laser model we developed for this work are then outlined in Section 3. In Section 4, results of our study are presented, including designs for optimum lattice-matched and strained-layer solar-pumped quantum-well lasers and threshold pumping estimates for these structures. It was hoped at the outset of this work that structures could be identified which could be expected to operate continuously at solar photoexcitation intensities of several thousand suns, and this indeed turned out to be the case as described in this section. Our project is

  15. 41 CFR 101-5.104-3 - Data requirements for feasibility studies.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... feasibility studies. 101-5.104-3 Section 101-5.104-3 Public Contracts and Property Management Federal Property... FEDERAL BUILDINGS AND COMPLEXES 5.1-General § 101-5.104-3 Data requirements for feasibility studies. (a) The data requirements for feasibility studies may vary from program to program, but shall be...

  16. 41 CFR 101-5.104-3 - Data requirements for feasibility studies.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... feasibility studies. 101-5.104-3 Section 101-5.104-3 Public Contracts and Property Management Federal Property... FEDERAL BUILDINGS AND COMPLEXES 5.1-General § 101-5.104-3 Data requirements for feasibility studies. (a) The data requirements for feasibility studies may vary from program to program, but shall be...

  17. 41 CFR 101-5.104-3 - Data requirements for feasibility studies.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... feasibility studies. 101-5.104-3 Section 101-5.104-3 Public Contracts and Property Management Federal Property... FEDERAL BUILDINGS AND COMPLEXES 5.1-General § 101-5.104-3 Data requirements for feasibility studies. (a) The data requirements for feasibility studies may vary from program to program, but shall be...

  18. 41 CFR 101-5.104-3 - Data requirements for feasibility studies.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... feasibility studies. 101-5.104-3 Section 101-5.104-3 Public Contracts and Property Management Federal Property... FEDERAL BUILDINGS AND COMPLEXES 5.1-General § 101-5.104-3 Data requirements for feasibility studies. (a) The data requirements for feasibility studies may vary from program to program, but shall be...

  19. 76 FR 71601 - Record of Decision, Long Walk National Historic Trail Feasibility Study/Abbreviated Final...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-11-18

    ... National Park Service Record of Decision, Long Walk National Historic Trail Feasibility Study/Abbreviated... Environmental Impact Statement for the Long Walk National Historic Trail Feasibility Study. SUMMARY: Pursuant to... Statement for the Long Walk National Historic Trail Feasibility Study, prepared by National...

  20. 41 CFR 101-5.104-3 - Data requirements for feasibility studies.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... feasibility studies. 101-5.104-3 Section 101-5.104-3 Public Contracts and Property Management Federal Property... FEDERAL BUILDINGS AND COMPLEXES 5.1-General § 101-5.104-3 Data requirements for feasibility studies. (a) The data requirements for feasibility studies may vary from program to program, but shall be...

  1. MR safety and imaging of neuroform stents at 3T.

    PubMed

    Nehra, Arvind; Moran, Christopher J; Cross, Dewitte T; Derdeyn, Colin P

    2004-10-01

    The Neuroform stent is a self-expanding nitinol stent designed for use in wide-necked intracranial aneurysms. Heating and imaging artifacts were evaluated by using a porcine carotid artery aneurysm model in a 3T MR system. A suspended Neuroform stent was tested for deflection. No heating was measured, and no evidence of deflection of the stent was found. Imaging artifacts were minimal. MR imaging in patients with Neuroform stent-treated aneurysms is safe and feasible.

  2. Design and feasibility study for a portable oil recovery turbopump

    NASA Technical Reports Server (NTRS)

    1982-01-01

    A portable oil recovery turbopump concept, using the Firefly module as primer mover, for the offloading of distressed tank vessels is examined. The demands to be met both in terms of the type of petroleum to be offloaded, as well as the operational requirements placed on the pump, are studied with respect to the capability of different pump configurations. Two configurations, one a centrifugal type and the other a screw type pump, are developed and evaluated. While the centrifugal configuration is found to be effective in a large proportion of tank vessel offloading situations, the screw type will be required where high viscosity cargoes are involved. The feasibility of the turbopump concept, with the Firefly module as prime mover, is established.

  3. Feasibility study for analyzing plasma-aerodynamic effects

    SciTech Connect

    Penetrante, B; Sherohman, J

    1999-05-07

    The purpose of this feasibility study was to conduct preliminary modeling to elucidate the mechanisms responsible for the effects observed in the Air Force Research Laboratory (AFRL) shock tube experiment. It was assumed that the plasma is simply a region of gas in the shock tube that has a higher gas temperature. Computational fluid dynamics (CFD) calculations were performed to simulate the propagation of a shock wave through the tube, using the same parameters in the experiment. Both 1- D and 3-D CFD calculations were performed to determine which effects can be explained simply by axial temperature gradients and which effects require the presence of radial temperature gradients. Discharge plasma physics calculations of a longitudinal glow discharge were then used to establish if the electrical currents used in the experiment are consistent with the gas temperature distributions that are necessary to explain the observed effects.

  4. District heating/cooling feasibility study for Jamestown, New York

    SciTech Connect

    Oliker, I.; Buffa, W.; Harms, R.; Preston, E.

    1982-12-01

    The report describes the results of a district heating feasibility study for Jamestown, New York based on the use of a power plant located within the city limits. Several options for the extraction of heat from the power plant were developed, with heat balances presented, based on the development of a hot water district heating system. The geography and climate of the area are discussed, as well as the primary potential heat district. The heat load assessment was based on fuel consumption data collected from a sampling of various types of structures and operations. The report presents the methodology in detail, along with block-by-block results including heated floor space, total annual fuel consumed, and peak heat rate demands. A transmission and distribution system was then developed for delivering heat from the power plant to the district heating customers.

  5. Carbon Dioxide Observational Platform System (CO-OPS), feasibility study

    NASA Technical Reports Server (NTRS)

    Bouquet, D. L.; Hall, D. W.; Mcelveen, R. P.

    1987-01-01

    The Carbon Dioxide Observational Platform System (CO-OPS) is a near-space, geostationary, multi-user, unmanned microwave powered monitoring platform system. This systems engineering feasibility study addressed identified existing requirements such as: carbon dioxide observational data requirements, communications requirements, and eye-in-the-sky requirements of other groups like the Defense Department, the Forestry Service, and the Coast Guard. In addition, potential applications in: earth system science, space system sciences, and test and verification (satellite sensors and data management techniques) were considered. The eleven month effort is summarized. Past work and methods of gathering the required observational data were assessed and rough-order-of magnitude cost estimates have shown the CO-OPS system to be most cost effective (less than $30 million within a 10 year lifetime). It was also concluded that there are no technical, schedule, or obstacles that would prevent achieving the objectives of the total 5-year CO-OPS program.

  6. Preparing tomorrow's health sciences librarians: feasibility and marketing studies.

    PubMed

    Moran, B B; Jenkins, C G; Friedman, C P; Lipscomb, C E; Gollop, C J; Moore, M E; Morrison, M L; Tibbo, H R; Wildemuth, B M

    1996-10-01

    The University of North Carolina at Chapel Hill is devising and evaluating five curricular models designed to improve education for health sciences librarianship. These models fit into a continual learning process from the initial professional preparation to lifelong learning opportunities. Three of them enhance existing degree and certificate programs in the School of Information and Library Science (SILS) with a health sciences specialization, and two are new programs for working information professionals. The approaches involve partnerships among SILS, the Health Sciences Library, and the program in Medical Informatics. The planning process will study the feasibility of the proposed programs, test the marketability of the models to potential students and employers, and make recommendations about implementation.

  7. A feasiblity study of an ultrasonic test phantom arm

    NASA Astrophysics Data System (ADS)

    Schneider, Philip

    This thesis is a feasibility study for the creation of a test phantom that replicates the physiological features, from an acoustic and mechanical standpoint, of that of a human arm. Physiological feature set includes; Heart, Arteries, Veins, Bone, Muscle, Fat, Skin, and Dermotographic Features (finger prints). Mechanical Aspects include, vascular compression and distention, elasticity of tissue layers, mechanics of human heart. The end goal of which to have a working understanding of each component in order to create a controllable, real time, physiologically accurate, test phantom for a wide range of ultrasonic based applications. These applications can range from devices like wearable technologies to medical training, to biometric "Liveness" detection methods. The proposed phantom would allow for a number of natural bodily functions to be measured including but not limited to vascular mapping, blood pressure, heart rate, subdermal imaging, and general ultrasonic imaging.

  8. Feasibility study for a transportation operations system cask maintenance facility

    SciTech Connect

    Rennich, M.J.; Medley, L.G.; Attaway, C.R.

    1991-01-01

    The US Department of Energy (DOE), Office of Civilian Radioactive Waste Management (OCRWM) is responsible for the development of a waste management program for the disposition of spent nuclear fuel (SNF) and high-level waste (HLW). The program will include a transportation system for moving the nuclear waste from the sources to a geologic repository for permanent disposal. Specially designed casks will be used to safely transport the waste. The cask systems must be operated within limits imposed by DOE, the Nuclear Regulatory Commission (NRC), and the Department of Transportation (DOT). A dedicated facility for inspecting, testing, and maintaining the cask systems was recommended by the General Accounting Office (in 1979) as the best means of assuring their operational effectiveness and safety, as well as regulatory compliance. In November of 1987, OCRWM requested a feasibility study be made of a Cask Maintenance Facility (CMF) that would perform the required functions. 46 refs., 16 figs., 13 tabs.

  9. Technical Feasibility Study for Zero Energy K-12 Schools

    SciTech Connect

    Pless, Shanti D.; Torcellini, Paul A.; Bonnema, Eric; Goldwasser, David

    2016-08-26

    A simulation-based technical feasibility study was completed to show the types of technologies required to achieve ZEB status with this building type. These technologies are prioritized across the building's subsystem such that design teams can readily integrate the ideas. Energy use intensity (EUI) targets were established for U.S. climate zones such that K-12 schools can be zero-ready or can procure solar panels or other renewable energy production sources to meet the zero energy building definition. Results showed that it is possible for K-12 schools to achieve zero energy when the EUI is between 20 and 26 kBtu/ft2/yr. Temperate climates required a smaller percentage of solar panel coverage than very hot or very cold climates. The paper provides a foundation for technically achieving zero energy schools with a vision of transforming the school construction market to mainstream zero energy buildings within typical construction budgets.

  10. Adaptive multibeam antennas for spacelab. Phase A: Feasibility study

    NASA Technical Reports Server (NTRS)

    Allen, C. C.; Applebaum, S. P.; Popowsky, W. J.; Wouch, G.

    1976-01-01

    The feasibility was studied of using adaptive multibeam multi-frequency antennas on the spacelab, and to define the experiment configuration and program plan needed for a demonstration to prove the concept. Three applications missions were selected, and requirements were defined for an L band communications experiment, an L band radiometer experiment, and a Ku band communications experiment. Reflector, passive lens, and phased array antenna systems were considered, and the Adaptive Multibeam Phased Array (AMPA) was chosen. Array configuration and beamforming network tradeoffs resulted in a single 3m x 3m L band array with 576 elements for high radiometer beam efficiency. Separate 0.4m x 0.4 m arrays are used to transmit and receive at Ku band with either 576 elements or thinned apertures. Each array has two independently steerable 5 deg beams, which are adaptively controlled.

  11. Feasibility study of a superconducting motor for electrical helicopter propulsion

    NASA Astrophysics Data System (ADS)

    Simons, C. A. B. A. E.; Sanabria-Walter, C.; Polinder, H.

    2014-05-01

    During the past decades, superconducting electrical machines have become more suitable to replace conventional iron based designs, because of their lower weight and higher torque density. These properties make them good candidates for use in More Electric Aircraft (MEA). Especially helicopter propulsion systems could benefit from the increased performance. This paper describes the feasibility study of a superconducting motor to be used for helicopter propulsion as part of a More Electric Aircraft (MEA). For this, the armature, field windings and cryostat are designed, aiming at meeting the difficult specifications. Since superconductors have virtually no electrical resistance when cooled down below a certain critical temperature, they can be used to build high field and low weight coils for electrical machines. Especially the possibility to not use iron can make the superconducting motor lighter with a higher power density compared with conventional Permanent Magnet (PM) motors.

  12. Retrograde tibial nail: anatomical implantation and surgical feasibility study.

    PubMed

    Kuhn, S; Appelmann, P; Pairon, P; Gruszka, D; Rommens, P M

    2015-01-01

    PURPOSE OF THE STUDY The treatment of distal tibial fractures requires a stable fixation while minimizing the secondary trauma to the soft tissues by the surgical approach and implant. The experimental Retrograde Tibial Nail is currently investigated as a minimally invasive alternative to plating and antegrade nailing. The purpose of this study was to evaluate the surgical feasibility in a cadaver model for all distal tibial fracture types generally considered treatable by nailing. MATERIAL AND METHODS Five different fracture types (AO/OTA 43-A1/A2/A3 and 43-C1/C2) were created on separate cadaveric limbs. In simple fractures (AO/OTA 43-A1/A2/A3) primary nailing was performed. In intraarticular fractures (AO/OTA 43-C1/2) reduction of the articular block and lag screw fixation was performed before nailing. Intraoperative complications, quality of reduction, fluoroscopy duration and operative time were evaluated. RESULTS Retrograde intramedullary nailing is feasible in simple fracture types by closed manual reduction and percutaneous reduction forceps. Retrograde nailing is possible in fractures with simple intraarticular involvement after primary lag screw fixation. The duration of surgery averaged 51.8 minutes (range 40-62 min). No major complications occurred during nailing. CONCLUSIONS The minimally invasive retrograde nail combines a minimally invasive local osteosynthesis with the ability to adequately fix extraarticular and simple intraarticular distal tibial fractures. The results suggests that retrograde tibia nailing is a promising new concept for the treatment of distal tibia fractures. Key words: minimally invasive surgery, tibia, metaphyseal fractures, intramedullary nailing, retrograde nailing.

  13. Gene Expression Patterns of Hemizygous and Heterozygous KIT Mutations Suggest Distinct Oncogenic Pathways: A Study in NIH3T3 Cell Lines and GIST Samples

    PubMed Central

    Dessaux, Sophie; Besse, Anthony; Brahimi-Adouane, Sabrina; Emile, Jean-François; Blay, Jean-Yves; Alberti, Laurent

    2013-01-01

    Objective Most gain of function mutations of tyrosine kinase receptors in human tumours are hemizygous. Gastrointestinal stromal tumours (GIST) with homozygous mutations have a worse prognosis. We aimed to identify genes differentially regulated by hemizygous and heterozygous KIT mutations. Materials and Methods Expression of 94 genes and 384 miRNA was analysed with low density arrays in five NIH3T3 cell lines expressing the full-length human KIT cDNA wild-type (WT), hemizygous KIT mutation with del557-558 (D6) or del564-581 (D54) and heterozygous WT/D6 or WT/D54. Expression of 5 of these genes and 384 miRNA was then analysed in GISTs samples. Results Unsupervised and supervised hierarchical clustering of the mRNA and miRNA profiles showed that heterozygous mutants clustered with KIT WT expressing cells while hemizygous mutants were distinct. Among hemizygous cells, D6 and D54 expressing cells clustered separately. Most deregulated genes have been reported as potentially implicated in cancer and severals, as ANXA8 and FBN1, are highlighted by both, mRNA and miRNA analyses. MiRNA and mRNA analyses in GISTs samples confirmed that their expressions varied according to the mutation of the alleles. Interestingly, RGS16, a membrane protein of the regulator of G protein family, correlate with the subcellular localization of KIT mutants and might be responsible for regulation of the PI3K/AKT signalling pathway. Conclusion Patterns of mRNA and miRNA expression in cells and tumours depend on heterozygous/hemizygous status of KIT mutations, and deletion/presence of TYR568 & TYR570 residues. Thus each mutation of KIT may drive specific oncogenic pathways. PMID:23593401

  14. Sodium alginate-cross-linked polymyxin B sulphate-loaded solid lipid nanoparticles: Antibiotic resistance tests and HaCat and NIH/3T3 cell viability studies.

    PubMed

    Severino, Patrícia; Chaud, Marco V; Shimojo, Andrea; Antonini, Danilo; Lancelloti, Marcelo; Santana, Maria Helena A; Souto, Eliana B

    2015-05-01

    Polymyxins are a group of antibiotics with a common structure of a cyclic peptide with a long hydrophobic tail. Polymyxin B sulphate (PLX) has cationic charge, which is an obstacle for the efficient loading into Solid Lipid Nanoparticles (SLN). In the present paper, we describe an innovative method to load PLX into SLN to achieve the sustained release of the drug. PLX was firstly cross-linked with sodium alginate (SA) at different ratios (1:1, 1:2 and 1:3 SA/PLX), and loaded into SLN produced by high pressure homogenization (HPH). Optimized SLN were produced applying 500bar pressure and 5 homogenization cycles. The best results were obtained with SA/PLX (1:1), recording 99.08±1.2% for the association efficiency of the drug with SA, 0.99±10g for the loading capacity and 212.07±5.84% degree of swelling. The rheological profile of aqueous SA solution followed the typical behaviour of concentrated polymeric solutions, whereas aqueous SA/PLX solution exhibited a gel-like dynamic behaviour. Micrographs show that SA/PLX depicted a porous and discontinuous amorphous phase in different ratios. The encapsulation efficiency of SA/PLX (1:1) in SLN, the mean particle diameter, polydispersity index and zeta potential were, respectively, 82.7±5.5%; 439.5±20.42nm, 0.241±0.050 and -34.8±0.55mV. The effect of SLN on cell viability was checked in HaCat and NIH/3T3 cell lines, and the minimal inhibitory concentrations (MIC) were determined in Pseudomonas aeruginosa strains. SA/PLX-loaded SLN were shown to be less toxic than free PLX. Minimal inhibitory concentrations (MIC) showed the presence of the cross-linker polymer-drug complex, and SLN were shown to enhance MIC in the evaluated strains.

  15. Study of lactoferrin gene expression in human and mouse adipose tissue, human preadipocytes and mouse 3T3-L1 fibroblasts. Association with adipogenic and inflammatory markers.

    PubMed

    Moreno-Navarrete, José María; Serrano, Marta; Sabater, Mònica; Ortega, Francisco; Serino, Matteo; Pueyo, Neus; Luche, Elodie; Waget, Aurelie; Rodriguez-Hermosa, José Ignacio; Ricart, Wifredo; Burcelin, Remy; Fernández-Real, José Manuel

    2013-07-01

    Lactoferrin is considered an epithelial protein present in different gland secretions. Administration of exogenous lactoferrin is also known to modulate adipogenesis and insulin action in human adipocytes. Here, we aimed to investigate lactoferrin gene expression (real-time polymerase chain reaction) and protein (enzyme-linked immunosorbent assay) levels in human (n=143) and mice adipose tissue samples, in adipose tissue fractions and during human preadipocyte and 3T3-L1 cell line differentiation, evaluating the effects of inducers (rosiglitazone) and disruptors (inflammatory factors) of adipocyte differentiation. Lactoferrin (LTF) gene and protein were detectable at relatively high levels in whole adipose tissue and isolated adipocytes in direct association with low-density lipoprotein-related protein 1 (LRP1, its putative receptor). Obese subjects with type 2 diabetes and increased triglycerides had the lowest levels of LTF gene expression in subcutaneous adipose tissue. Specifically, LTF gene expression was significantly increased in adipocytes, mainly from lean subjects, increasing during differentiation in parallel to adipogenic genes and gene markers of lipid droplets. The induction or disruption of adipogenesis led to concomitant changes (increase and decrease, respectively) of lactoferrin levels during adipocyte differentiation also in parallel to gene markers of adipogenesis and lipid droplet development. The administration of lactoferrin led to autopotentiated increased expression of the LTF gene. The decreased lactoferrin mRNA levels in association with obesity and diabetes were replicated in mice adipose tissue. In conclusion, this is the first observation, to our knowledge, of lactoferrin gene expression in whole adipose tissue and isolated adipocytes, increasing during adipogenesis and suggesting a possible contribution in adipose tissue physiology through LRP1.

  16. Feasibility of remote sensing for detecting thermal pollution. Part 1: Feasibility study. Part 2: Implementation plan. [coastal ecology

    NASA Technical Reports Server (NTRS)

    Veziroglu, T. N.; Lee, S. S.

    1973-01-01

    A feasibility study for the development of a three-dimensional generalized, predictive, analytical model involving remote sensing, in-situ measurements, and an active system to remotely measure turbidity is presented. An implementation plan for the development of the three-dimensional model and for the application of remote sensing of temperature and turbidity measurements is outlined.

  17. Dynamic electron arc radiotherapy (DEAR): a feasibility study

    NASA Astrophysics Data System (ADS)

    Rodrigues, Anna; Yin, Fang-Fang; Wu, Qiuwen

    2014-01-01

    Compared to other radiation therapy modalities, clinical electron beam therapy has remained practically unchanged for the past few decades even though electron beams with multiple energies are widely available on most linacs. In this paper, we present the concept of dynamic electron arc radiotherapy (DEAR), a new conformal electron therapy technique with synchronized couch motion. DEAR utilizes combination of gantry rotation, couch motion, and dose rate modulation to achieve desirable dose distributions in patient. The electron applicator is kept to minimize scatter and maintain narrow penumbra. The couch motion is synchronized with the gantry rotation to avoid collision between patient and the electron cone. In this study, we investigate the feasibility of DEAR delivery and demonstrate the potential of DEAR to improve dose distributions on simple cylindrical phantoms. DEAR was delivered on Varian's TrueBeam linac in Research Mode. In conjunction with the recorded trajectory log files, mechanical motion accuracies and dose rate modulation precision were analyzed. Experimental and calculated dose distributions were investigated for different energies (6 and 9 MeV) and cut-out sizes (1×10 cm2 and 3×10 cm2 for a 15×15 cm2 applicator). Our findings show that DEAR delivery is feasible and has the potential to deliver radiation dose with high accuracy (root mean square error, or RMSE of <0.1 MU, <0.1° gantry, and <0.1 cm couch positions) and good dose rate precision (1.6 MU min-1). Dose homogeneity within ±2% in large and curved targets can be achieved while maintaining penumbra comparable to a standard electron beam on a flat surface. Further, DEAR does not require fabrication of patient-specific shields. These benefits make DEAR a promising technique for conformal radiotherapy of superficial tumors.

  18. Dynamic electron arc radiotherapy (DEAR): a feasibility study.

    PubMed

    Rodrigues, Anna; Yin, Fang-Fang; Wu, Qiuwen

    2014-01-20

    Compared to other radiation therapy modalities, clinical electron beam therapy has remained practically unchanged for the past few decades even though electron beams with multiple energies are widely available on most linacs. In this paper, we present the concept of dynamic electron arc radiotherapy (DEAR), a new conformal electron therapy technique with synchronized couch motion. DEAR utilizes combination of gantry rotation, couch motion, and dose rate modulation to achieve desirable dose distributions in patient. The electron applicator is kept to minimize scatter and maintain narrow penumbra. The couch motion is synchronized with the gantry rotation to avoid collision between patient and the electron cone. In this study, we investigate the feasibility of DEAR delivery and demonstrate the potential of DEAR to improve dose distributions on simple cylindrical phantoms. DEAR was delivered on Varian's TrueBeam linac in Research Mode. In conjunction with the recorded trajectory log files, mechanical motion accuracies and dose rate modulation precision were analyzed. Experimental and calculated dose distributions were investigated for different energies (6 and 9 MeV) and cut-out sizes (1×10 cm(2) and 3×10 cm(2) for a 15×15 cm(2) applicator). Our findings show that DEAR delivery is feasible and has the potential to deliver radiation dose with high accuracy (root mean square error, or RMSE of <0.1 MU, <0.1° gantry, and <0.1 cm couch positions) and good dose rate precision (1.6 MU min(-1)). Dose homogeneity within ±2% in large and curved targets can be achieved while maintaining penumbra comparable to a standard electron beam on a flat surface. Further, DEAR does not require fabrication of patient-specific shields. These benefits make DEAR a promising technique for conformal radiotherapy of superficial tumors.

  19. Feasibility Study of a Lunar Analog Bed Rest Model

    NASA Technical Reports Server (NTRS)

    Cromwell, Ronita L.; Platts, Steven H.; Yarbough, Patrice; Buccello-Stout, Regina

    2010-01-01

    The purpose of this study was to determine the feasibility of using a 9.5deg head-up tilt bed rest model to simulate the effects of the 1/6 g load to the human body that exists on the lunar surface. The lunar analog bed rest model utilized a modified hospital bed. The modifications included mounting the mattress on a sled that rolled on bearings to provide freedom of movement. The weight of the sled was off-loaded using a counterweight system to insure that 1/6 body weight was applied along the long axis (z-axis) of the body. Force was verified through use of a force plate mounted at the foot of the bed. A seating assembly was added to the bed to permit periods of sitting. Subjects alternated between standing and sitting positions throughout the day. A total of 35% of the day was spent in the standing position and 65% was spent sitting. In an effort to achieve physiologic fluid shifts expected for a 1/6 G environment, subjects wore compression stockings and performed unloaded foot and ankle exercises. Eight subjects (3 females and 5 males) participated in this study. Subjects spent 13 days in the pre-bed rest phase, 6 days in bed rest and 3 days post bed rest. Subjects consumed a standardized diet throughout the study. To determine feasibility, measures of subject comfort, force and plasma volume were collected. Subject comfort was assessed using a Likert scale. Subjects were asked to assess level of comfort (0-100) for 11 body regions and provide an overall rating. Results indicated minimal to no discomfort as most subjects reported scores of zero. Force measures were performed for each standing position and were validated against subject s calculated 1/6 body weight (r(sup 2) = 0.993). The carbon monoxide rebreathing technique was used to assess plasma volume during pre-bed rest and on the last day of bed rest. Plasma volume results indicated a significant decrease (p = 0.001) from pre to post bed rest values. Subjects lost on average 8.3% (sd = 6.1%) during the

  20. X-43D Conceptual Design and Feasibility Study

    NASA Technical Reports Server (NTRS)

    Johnson, Donald B.; Robinson, Jeffrey S.

    2005-01-01

    NASA s Next Generation Launch Technology (NGLT) Program, in conjunction with the office of the Director of Defense Research and Engineering (DDR&E), developed an integrated hypersonic technology demonstration roadmap. This roadmap is an integral part of the National Aerospace Initiative (NAI), a multi-year, multi-agency cooperative effort to invest in and develop, among other things, hypersonic technologies. This roadmap contains key ground and flight demonstrations required along the path to developing a reusable hypersonic space access system. One of the key flight demonstrations required for systems that will operate in the high Mach number regime is the X-43D. As currently conceived, the X-43D is a Mach 15 flight test vehicle that incorporates a hydrogen-fueled scramjet engine. The purpose of the X-43D is to gather high Mach number flight environment and engine operability information which is difficult, if not impossible, to gather on the ground. During 2003, the NGLT Future Hypersonic Flight Demonstration Office initiated a feasibility study on the X-43D. The objective of the study was to develop a baseline conceptual design, assess its performance, and identify the key technical issues. The study also produced a baseline program plan, schedule, and cost, along with a list of key programmatic risks.

  1. Quantification of manganese in human hand bones: a feasibility study

    NASA Astrophysics Data System (ADS)

    Aslam; Pejović-Milić, A.; Chettle, D. R.; McNeill, F. E.

    2008-08-01

    Manganese is both an essential element to human health and also toxic when humans are exposed to excessive levels, particularly by means of inhalation. Biological monitoring of manganese exposure is problematic. It is subject to homeostasis; levels in blood (or serum/plasma) reflect only the most recent exposure and rapidly return to within normal ranges, even when there has been a temporary excursion in response to exposure. In this context, we have been developing a non-invasive technique for measurement of manganese stored in bone, using in vivo neutron activation analysis. Following preliminary feasibility studies, the technique has been enhanced by two significant infrastructure advances. A specially designed irradiation facility serves to maximize the activation of manganese with respect to the dose of ionizing radiation. Secondly, an array of eight NaI(Tl) crystals provides a detection system with very close to 4π geometry. This feasibility study, using neutron activation analysis to measure manganese in the bones of the hand, takes two features into account. Firstly, there is considerable magnesium present in the bone and this produces a spectral interference with the manganese. The 26Mg(n,γ)27Mg reaction produces γ-rays of 0.843 MeV from the decay of 27Mg, which interfere with the 0.847 MeV γ-rays from the decay of 56Mn, produced by the 55Mn(n,γ)56Mn reaction. Secondly, this work provides estimates of the levels of manganese to be expected in referent subjects. A revised estimate has been made from the most recent literature to explore the potential of the technique as a suitable means of screening patients and people exposed to excessive amounts of Mn who could develop many-fold increased levels of Mn in bones as demonstrated through various animal studies. This report presents the enhancements to the neutron activation system, by which manganese can be measured, which resulted in a detection limit in the hand of human subjects of 1.6 µg/g Ca. It

  2. A Feasibility Study of Space VLBI for Geodesy and Geodynamics

    NASA Astrophysics Data System (ADS)

    Kulkarni, Madhav Narayan

    1992-01-01

    Space Very Long Baseline Interferometry (VLBI) is an extension of the ground based VLBI to the space. With the launching of two or more Space VLBI satellites in the future, Space VLBI observations will be available for astrometric, geodetic and geodynamic applications. This new technique holds potential for various important applications including monitoring Earth rotation and interconnection of the reference frames used in geodesy and geodynamics. The aim of this feasibility study has been to investigate the possibility of precise estimation of geodetic parameters, with emphasis on the Earth rotation parameters (ERP's), from Space VLBI observations. A brief description of the Space VLBI technique, it's possible applications, and the Space VLBI missions being planned has been given. Estimability analysis to investigate the estimability of geodetic parameters from Space VLBI observations has been carried out and a simplified mathematical model is derived in terms of estimable parameters. Results of sensitivity analysis carried out to study the sensitivity of the Space VLBI observables to the geodetic parameters of interest, including the number of these parameters and random errors in their a priori values, have been presented. Some of the dominant systematic effects including atmospheric refraction, solar radiation pressure and relativistic effects have also been investigated. Simulation studies have been carried out to study the influence of these systematic effects and a priori information on the estimation of the Earth rotation parameters. The results from the simulation studies indicate that it may be possible to use the Space VLBI technique for monitoring Earth rotation and polar motion, only if the orbital systematic effects can be modeled to a high degree of accuracy (or the satellites can be tracked, with high accuracy, independently), and precise a priori information on station coordinates from other sources is used. A brief description of the Space VLBI

  3. Final Report - Wind and Hydro Energy Feasibility Study - June 2011

    SciTech Connect

    Jim Zoellick; Richard Engel; Rubin Garcia; Colin Sheppard

    2011-06-17

    This feasibility examined two of the Yurok Tribe's most promising renewable energy resources, wind and hydro, to provide the Tribe detailed, site specific information that will result in a comprehensive business plan sufficient to implement a favorable renewable energy project.

  4. Feasibility study on polyurethane foam roofing insulation business

    SciTech Connect

    Morris, C.

    1987-05-04

    The Amador-Tuolumne Community Action Agency has evaluated the feasibility of starting a polyurethane foam roofing insulation business in the foothills counties of El Dorado, Amador, Calaveras, Tuolumne and Mariposa. This idea evolved from A-TCAA's efforts to insulate mobile homes through low-income weatherization programs. Thorough investigation of the product, market and financial requirements for this business indicate that the feasibility is questionable.

  5. Feasibility studies for a wireless 60 GHz tracking detector readout

    NASA Astrophysics Data System (ADS)

    Dittmeier, S.; Schöning, A.; Soltveit, H. K.; Wiedner, D.

    2016-09-01

    The amount of data produced by highly granular silicon tracking detectors in high energy physics experiments poses a major challenge to readout systems. At high collision rates, e.g. at LHC experiments, only a small fraction of data can be read out with currently used technologies. To cope with the requirements of future or upgraded experiments new data transfer techniques are required which offer high data rates at low power and low material budget. Wireless technologies operating in the 60 GHz band or at higher frequencies offer high data rates and are thus a promising upcoming alternative to conventional data transmission via electrical cables or optical fibers. Using wireless technology, the amount of cables and connectors in detectors can be significantly reduced. Tracking detectors profit most from a reduced material budget as fewer secondary particle interactions (multiple Coulomb scattering, energy loss, etc.) improve the tracking performance in general. We present feasibility studies regarding the integration of the wireless technology at 60 GHz into a silicon tracking detector. We use spare silicon strip modules of the ATLAS experiment as test samples which are measured to be opaque in the 60 GHz range. The reduction of cross talk between links and the attenuation of reflections is studied. An estimate of the maximum achievable link density is given. It is shown that wireless links can be placed as close as 2 cm next to each other for a layer distance of 10 cm by exploiting one or several of the following measures: highly directive antennas, absorbers like graphite foam, linear polarization and frequency channeling. Combining these measures, a data rate area density of up to 11 Tb/(s·m2) seems feasible. In addition, two types of silicon sensors are tested under mm-wave irradiation in order to determine the influence of 60 GHz data transmission on the detector performance: an ATLAS silicon strip sensor module and an HV-MAPS prototype for the Mu3e

  6. Feasibility study of geothermal heating, Modoc Lassen housing project

    SciTech Connect

    Not Available

    1981-11-01

    This study evaluates the feasibility of using geothermal water for space and domestic water heating systems at the elderly housing project now ready for construction at the Modoc Lassen Indian Reservation. For the six units considered, the space heating load is four times the domestic water heating load. Since the geothermal water temperature is uncertain, two scenarios were evaluated. In the first, which assumes 160/sup 0/F supply temperature, the geothermal system is assumed to satisfy the entire space and domestic water heating loads. In the second, which assumes the supply temperature to be less than 120/sup 0/F at the wellhead only space heating is provided. The economics of the first scenario are quite favorable. The additional expenditure of $15,630 is projected to save $3522 annually at current energy costs, and the life cycle cost study projects a discounted rate of return on the investment of 44.4%. Surprisingly, the investment is even more favorable for the second scenario, due to the higher cost and lower resultant savings for the domestic water components. Forced air space heating from geothermal is recommended. Domestic water heating is recommended pending additional information on supply water temperature.

  7. Feasibility study of using industrial robot for ultrasound testing

    SciTech Connect

    Hsia, T.C. . Dept. of Electrical Engineering and Computer Science)

    1989-02-13

    The purpose of this program is to study the feasibility of employing an articulated industrial robot arm to perform ultrasound scanning of a work piece. The robot arm suitable for such application is the Unimation PUMA 560 manipulator with six degrees of freedom. This research is intended to study the basic properties of several issues which arise in the operations of the UTB facility at LLNL. These issues involve the understanding of control algorithms for collision-free motions of the robot arm with and without redundant kinematics, trajectory generation schemes for automated surface tracking based on 3D CAD/CAM model of the work piece, and the effective use of computer vision and ultrasound sensor to achieve position calibration of a work piece and on-line trajectory modification for accurate surface tracking. The robotics research laboratory at UC Davis has a research robotic system based on a six degrees-of-freedom Unimation PUMA 560 arm and a VAL-II controller. This system is used as a research tool for the investigation. 20 refs., 8 figs.

  8. Study of recycling feasibility. Final report, May 1993-March 1996

    SciTech Connect

    Pribanic, J.A.S.; Smith, J.A.; Jennings, P.W.; Bell, C.A.

    1996-03-01

    This report describes a feasibility of recycling asphalt pavements using two major analytical techniques: High Performance Gel Permeation Chromatography (HP-GPC) and Dynamic Mechanical Analysis (DMA). HP-GPG probes the chemistry of the asphalt cement. DMA measures certain physical characteristics of the asphalt cement and of the mix. Four projects that had been recycled, three by hot methods, the other by a cold, in-place process (CIPR), were studied. Specifically, the HP-GPC characteristics of the asphalts before and after recycling and the resilient moduli of some recycled mixtures were obtained. In addition, three sources of recovered asphalt pavement were subjected to modeling of hot and cold recycling strategies and tested by DMA on mixes as well as by HP-GPC. Finally, an additional five pavements that are candidates for recycling were sampled and the asphalt cements extracted for HP-GPC and DMA testing using both hot and cold recycling simulations. This report details the study procedures and discusses the data and their interpretations. Included in this report is data on the HP-GPC characteristics of the asphalt cements available in the state of Montana in 1993. Also, testing of asphalt cements from an experimental project and a distressed pavement is addressed briefly.

  9. Feasibility study of an image slicer for future space application

    NASA Astrophysics Data System (ADS)

    Calcines, A.; Ichimoto, K.

    2014-08-01

    This communication presents the feasibility study of an image slicer for future space missions, especially for the integral field unit (IFU) of the SUVIT (Solar UV-Visible-IR telescope) spectro-polarimeter on board the Japanese-led solar space mission Solar-C as a backup option. The MuSICa (Multi-Slit Image slicer based on collimator-Camera) image slicer concept, originally developed for the European Solar Telescope, has been adapted to the SUVIT requirements. The IFU will reorganizes a 2-D field of view of 10 x 10 arcsec2 into three slits of 0.18 arcsec width by 185.12 arcsec length using flat slicer mirrors of 100 μm width. The layout of MuSICa for Solar-C is telecentric and offers an optical quality limited by diffraction. The entrance for the SUVIT spectro-polarimeter is composed by the three IFU slits and one ordinal long slit to study, using high resolution spectro-polarimetry, the solar atmosphere (Photosphere and Chromosphere) within a spectral range between 520 nm (optionally 280 nm) and 1,100 nm.

  10. Feasibility study on pliant media drying using fluidized bed dryer

    NASA Astrophysics Data System (ADS)

    Zakaria, J. H.; Zaid, M. H. H. M.; Batcha, M. F. M.; Asmuin, N.

    2015-09-01

    The usage of pliant media for blasting in surface preparation has gained substantial interest in various industries, particularly oil and gas. Being a clean technology, this relatively new method of surface preparation has become an alternative to conventional abrasive blasting technique which lowers fugitive emissions from blasting process and hence lowering risk to workers in the industry. Despite proven to be effective and cost efficient, the usage of pliant media in tropical climate poses a new challenge due to the torrential rain in the monsoon season. During rainy and wet conditions, the pliant media was literally soaked and the recovery rate of the pliant media for a continuous blasting becomes retarded. A viable technique for drying of this pliant media has then become imperative. The present study proposes to dry water laden pliant media in a Swirling Fluidized Bed Dryer (SFBD). In this preliminary study, three bed loadings of 1.7, 2.0 and 2.3 kg of pliant media was dried in the SfBd at 80°C, 90°C and 100°C. The experimental works revealed that the SFBD has shown excellent potential to dry the pliant media with a relatively short drying time. The behaviour of moisture ratio and drying rate against time are discussed. The findings conclude that the SFBD is a feasible technique for wet pliant media drying and can be extended for continuous processing system.

  11. New approach for implantable hearing aids: a feasibility study.

    PubMed

    Sichel, Jean-Yves; Freeman, Sharon; Fleishman, Zvi; Eliashar, Ron; Sohmer, Haim

    2004-11-01

    The objective of this study was to test the feasibility of a new kind of implantable hearing device based on a cerebrospinal fluid hydroacoustic pathway by which sound waves are conducted from the dura mater to the inner ear by cerebrospinal fluid. In this prospective animal study, a piezoelectric bimorph was implanted into 2 guinea pigs and 1 dog between the skull bone and the dura at the parietal area. The bimorph was connected transdermally by wires to a click generator. The auditory brain stem response was recorded after stimulation of the piezoelectric device by the click generator. In the 3 animals, the auditory brain stem response could be recorded in response to a stimulus intensity of 135 dB peak equivalent (pe) sound pressure level (SPL; instrument setting), corresponding to 3.8 V activating the device. The auditory brain stem response disappeared during white noise masking, proving that the origin of the response was in the inner ear. The threshold was 125 and 115 dB pe SPL in the 2 guinea pigs and 135 dB pe SPL in the dog (instrument setting). We conclude that transmission of sound waves by a cerebrospinal fluid hydroacoustic pathway to the inner ear is possible. Such a device would have advantages over more traditional implantable hearing devices: it would not be necessary to couple it to the ossicular chain, and it could be used in patients with infected middle ears.

  12. Structural design feasibility study of Space Station long spacer truss

    NASA Technical Reports Server (NTRS)

    Armand, Sasan C.; Funk, Gregory P.; Dohogne, Caroline A.

    1994-01-01

    The structural design and configuration feasibility of the long spacer truss assembly that will be used as part of the Space Station Freedom is the focus of this study. The structural analysis discussed herein is derived from the transient loading events presented in the Space Transportation System Interface Control Document (STS ICD). The transient loading events are liftoff, landing, and emergency landing loads. Quasi-static loading events were neglected in this study since the magnitude of the quasi-static acceleration factors is lower than that of the transient acceleration factors. Structural analysis of the proposed configuration of the long spacer truss with four longerons indicated that negative safety margins are possible. As a result, configuration changes were proposed. The primary configuration change suggested was to increase the number of truss longerons to six. The six-longeron truss appears to be a more promising structure than the four-longeron truss because it offers a positive margin of safety and more volume in its second bay (BAY2). This additional volume can be used for resupply of some of the orbital replacement units (such as a battery box). Note that the design effort on the long spacer truss has not fully begun and that calculations and reports of the negative safety margins are, to date, based on concept only.

  13. Towards optimal imaging with PET: an in silico feasibility study.

    PubMed

    McNamara, A L; Toghyani, M; Gillam, J E; Wu, K; Kuncic, Z

    2014-12-21

    The efficacy of Positron Emission Tomography (PET) imaging relies fundamentally on the ability of the system to accurately identify true coincidence events. With existing systems, this is currently accomplished with an energy acceptance criterion followed by correction techniques to remove suspected false coincidence events. These corrections generally result in signal and contrast loss and thus limit the PET system's ability to achieve optimum image quality. A key property of annihilation radiation is that the photons are polarised with respect to each other. This polarisation correlation offers a potentially powerful discriminator, independent of energy, to accurately identify true events. In this proof of concept study, we investigate how photon polarisation information can be exploited in PET imaging by developing a method to discriminate true coincidences using the polarisation correlation of annihilation pairs. We implement this method using a Geant4 PET simulation of a GE Advance/Discovery LS system and demonstrate the potential advantages of the polarisation coincidence selection method over a standard energy criterion method. Current PET ring detectors are not capable of exploiting the polarisation correlation of the photon pairs. Compton PET systems, however are promising candidates for this application. We demonstrate the feasibility of a two-component Compton camera system in identifying true coincidences with Monte Carlo simulations. Our study demonstrates the potential of improving signal gain using polarisation, particularly for high photon emission rates. We also demonstrate the ability of the Compton camera at exploiting this polarisation correlation in PET.

  14. Towards optimal imaging with PET: an in silico feasibility study

    NASA Astrophysics Data System (ADS)

    McNamara, A. L.; Toghyani, M.; Gillam, J. E.; Wu, K.; Kuncic, Z.

    2014-12-01

    The efficacy of Positron Emission Tomography (PET) imaging relies fundamentally on the ability of the system to accurately identify true coincidence events. With existing systems, this is currently accomplished with an energy acceptance criterion followed by correction techniques to remove suspected false coincidence events. These corrections generally result in signal and contrast loss and thus limit the PET system’s ability to achieve optimum image quality. A key property of annihilation radiation is that the photons are polarised with respect to each other. This polarisation correlation offers a potentially powerful discriminator, independent of energy, to accurately identify true events. In this proof of concept study, we investigate how photon polarisation information can be exploited in PET imaging by developing a method to discriminate true coincidences using the polarisation correlation of annihilation pairs. We implement this method using a Geant4 PET simulation of a GE Advance/Discovery LS system and demonstrate the potential advantages of the polarisation coincidence selection method over a standard energy criterion method. Current PET ring detectors are not capable of exploiting the polarisation correlation of the photon pairs. Compton PET systems, however are promising candidates for this application. We demonstrate the feasibility of a two-component Compton camera system in identifying true coincidences with Monte Carlo simulations. Our study demonstrates the potential of improving signal gain using polarisation, particularly for high photon emission rates. We also demonstrate the ability of the Compton camera at exploiting this polarisation correlation in PET.

  15. Structural Design Feasibility Study for the Global Climate Experiment

    SciTech Connect

    Lewin,K.F.; Nagy, J.

    2008-12-01

    Neon, Inc. is proposing to establish a Global Change Experiment (GCE) Facility to increase our understanding of how ecological systems differ in their vulnerability to changes in climate and other relevant global change drivers, as well as provide the mechanistic basis for forecasting ecological change in the future. The experimental design was initially envisioned to consist of two complementary components; (A) a multi-factor experiment manipulating CO{sub 2}, temperature and water availability and (B) a water balance experiment. As the design analysis and cost estimates progressed, it became clear that (1) the technical difficulties of obtaining tight temperature control and maintaining elevated atmospheric carbon dioxide levels within an enclosure were greater than had been expected and (2) the envisioned study would not fit into the expected budget envelope if this was done in a partially or completely enclosed structure. After discussions between NEON management, the GCE science team, and Keith Lewin, NEON, Inc. requested Keith Lewin to expand the scope of this design study to include open-field exposure systems. In order to develop the GCE design to the point where it can be presented within a proposal for funding, a feasibility study of climate manipulation structures must be conducted to determine design approaches and rough cost estimates, and to identify advantages and disadvantages of these approaches including the associated experimental artifacts. NEON, Inc requested this design study in order to develop concepts for the climate manipulation structures to support the NEON Global Climate Experiment. This study summarizes the design concepts considered for constructing and operating the GCE Facility and their associated construction, maintenance and operations costs. Comparisons and comments about experimental artifacts, construction challenges and operational uncertainties are provided to assist in selecting the final facility design. The overall goal

  16. Coded excitation for diverging wave cardiac imaging: a feasibility study

    NASA Astrophysics Data System (ADS)

    Zhao, Feifei; Tong, Ling; He, Qiong; Luo, Jianwen

    2017-02-01

    Diverging wave (DW) based cardiac imaging has gained increasing interest in recent years given its capacity to achieve ultrahigh frame rate. However, the signal-to-noise ratio (SNR), contrast, and penetration depth of the resulting B-mode images are typically low as DWs spread energy over a large region. Coded excitation is known to be capable of increasing the SNR and penetration for ultrasound imaging. The aim of this study was therefore to test the feasibility of applying coded excitation in DW imaging to improve the corresponding SNR, contrast and penetration depth. To this end, two types of codes, i.e. a linear frequency modulated chirp code and a set of complementary Golay codes were tested in three different DW imaging schemes, i.e. 1 angle DW transmit without compounding, 3 and 5 angles DW transmits with coherent compounding. The performances (SNR, contrast ratio (CR), contrast-to-noise ratio (CNR), and penetration) of different imaging schemes were investigated by means of simulations and in vitro experiments. As for benchmark, corresponding DW imaging schemes with regular pulsed excitation as well as the conventional focused imaging scheme were also included. The results showed that the SNR was improved by about 10 dB using coded excitation while the penetration depth was increased by 2.5 cm and 1.8 cm using chirp code and Golay codes, respectively. The CNR and CR gains varied with the depth for different DW schemes using coded excitations. Specifically, for non-compounded DW imaging schemes, the gain in the CR was about 5 dB and 3 dB while the gain in the CNR was about 4.5 dB and 3.5 dB at larger depths using chirp code and Golay codes, respectively. For compounded imaging schemes, using coded excitation, the gain in the penetration and contrast were relatively smaller compared to non-compounded ones. Overall, these findings indicated the feasibility of coded excitation in improving the image quality of DW imaging. Preliminary in vivo cardiac images

  17. Sitewide feasibility study Eielson Air Force Base, Alaska

    SciTech Connect

    Last, G.V.; Lanigan, D.C.; Josephson, G.B.; Bagaasen, L.M.

    1995-09-01

    The Sitewide Feasibility Study (FS) is required under the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA), the National Contingency Plan (NCP), and the Federal Facility Agreement (FFA) for Eielson Air Force Base (AFB). It is based on findings presented in the Sitewide Remedial Investigation (RI) Report (USAF 1995a), and the Sitewide Baseline Risk Assessment (BLRA) Report (USAF 1995b). Under the FFA, 64 potential source areas were placed in one of six operable units, based on similar contaminant and environmental characteristics, or were included for evaluation under a Source Evaluation Report (SER). The sitewide RI was directed at contamination that was not confined to an operable unit (OU) or SER source area. The objectives of the sitewide RI were to: Provide information about site characteristics to support individual OU RI/FS efforts and the sitewide RI/FS, including site hydrogeology and determination of background soil and groundwater characteristics; identify and characterize contamination that is not confined or attributable to a specific source area through sitewide monitoring of groundwater and surface water; evaluate cumulative risks to human health and the environment from contamination on a sitewide basis; and provide a mechanism for continued cohesive sitewide monitoring.

  18. Revised CTUIR Renewable Energy Feasibility Study Final Report

    SciTech Connect

    John Cox; Thomas Bailor; Theodore Repasky; Lisa Breckenridge

    2005-10-31

    This preliminary assessment of renewable energy resources on the Umatilla Indian Reservation (UIR) has been performed by CTUIR Department of Science and Engineering (DOSE). This analysis focused primarily identifying renewable resources that may be applied on or near the Umatilla Indian Reservation. In addition preliminary technical and economic feasibility of developing renewable energy resources have been prepared and initial land use planning issues identified. Renewable energies examined in the course of the investigation included solar thermal, solar photovoltaic, wind, bioethanol, bio-diesel and bio-pellet fuel. All renewable energy options studied were found to have some potential for the CTUIR. These renewable energy options are environmentally friendly, sustainable, and compliment many of the policy goals of the CTUIR. This report seeks to provide an overall review of renewable energy technologies and applications. It tries to identify existing projects near to the CTUIR and the efforts of the federal government, state government and the private sector in the renewable energy arena. It seeks to provide an understanding of the CTUIR as an energy entity. This report intends to provide general information to assist tribal leadership in making decisions related to energy, specifically renewable energy deve lopment.

  19. Feasibility study of superconducting LSM rocket launcher system

    NASA Technical Reports Server (NTRS)

    Yoshida, Kinjiro; Ohashi, Takaaki; Shiraishi, Katsuto; Takami, Hiroshi

    1994-01-01

    A feasibility study is presented concerning an application of a superconducting linear synchronous motor (LSM) to a large-scale rocket launcher, whose acceleration guide tube of LSM armature windings is constructed 1,500 meters under the ground. The rocket is released from the linear launcher just after it gets to a peak speed of about 900 kilometers per hour, and it flies out of the guide tube to obtain the speed of 700 kilometers per hour at the height of 100 meters above ground. The linear launcher is brought to a stop at the ground surface for a very short time of 5 seconds by a quick control of deceleration. Very large current variations in the single-layer windings of the LSM armature, which are produced at the higher speed region of 600 to 900 kilometers per hour, are controlled successfully by adopting the double-layer windings. The proposed control method makes the rocket launcher ascend stably in the superconducting LSM system, controlling the Coriolis force.

  20. Proceedings of the remedial investigation/feasibility study workshop. [HAZWRAP

    SciTech Connect

    Not Available

    1988-12-01

    The objective of this workshop was to familiarize Department of Energy (DOE) personnel and contractors with all aspects of developing, managing, and conducting an RI/FS, based on HAZWRAP SCO experience in similar activities as part of the Installation Restoration program (IRP). The HAZWRAP SCO participation in Department of Defense (DOD) restoration activities provides an opportunity to develop capability and experience which are transferable to DOE activities. Paul Franco, Program Manager for the IRP, provided an overview of the IRP experience in conducting an RI/FS for a National Priorities List (NPL) site and a non-NPL site. A non-NPL site does not require an RI/FS by regulation; however, the RI/FS process can be used to determine whether to proceed with a feasibility study or terminate the action with a decision document. Al Porell, Program Manager for ICP, discussed the use of decision documents to remove non-NPL sites from regulatory consideration. DOE-Idaho has used similar documentation to remove numerous sites from their list of potential remedial action sites. Mr. Porell also discussed the use of the Technical Review Committee (TRC), which is established to coordinate activities during the RI/FS process. The TRC includes state, local, and federal authorities, and Air Force installation personnel.

  1. Feasibility study of tank leakage mitigation using subsurface barriers

    SciTech Connect

    Treat, R.L.; Peters, B.B.; Cameron, R.J.; McCormak, W.D.; Trenkler, T.; Walters, M.F.; Rouse, J.K.; McLaughlin, T.J.; Cruse, J.M.

    1994-09-21

    The US Department of Energy (DOE) has established the Tank Waste Remediation System (TWRS) to satisfy manage and dispose of the waste currently stored in the underground storage tanks. The retrieval element of TWRS includes a work scope to develop subsurface impermeable barriers beneath SSTs. The barriers could serve as a means to contain leakage that may result from waste retrieval operations and could also support site closure activities by facilitating cleanup. Three types of subsurface barrier systems have emerged for further consideration: (1) chemical grout, (2) freeze walls, and (3) desiccant, represented in this feasibility study as a circulating air barrier. This report contains analyses of the costs and relative risks associated with combinations retrieval technologies and barrier technologies that from 14 alternatives. Eight of the alternatives include the use of subsurface barriers; the remaining six nonbarrier alternative are included in order to compare the costs, relative risks and other values of retrieval with subsurface barriers. Each alternative includes various combinations of technologies that can impact the risks associated with future contamination of the groundwater beneath the Hanford Site to varying degrees. Other potential risks associated with these alternatives, such as those related to accidents and airborne contamination resulting from retrieval and barrier emplacement operations, are not quantitatively evaluated in this report.

  2. Energy Modulated Photon Radiotherapy: A Monte Carlo Feasibility Study

    PubMed Central

    Zhang, Ying; Feng, Yuanming; Ming, Xin

    2016-01-01

    A novel treatment modality termed energy modulated photon radiotherapy (EMXRT) was investigated. The first step of EMXRT was to determine beam energy for each gantry angle/anatomy configuration from a pool of photon energy beams (2 to 10 MV) with a newly developed energy selector. An inverse planning system using gradient search algorithm was then employed to optimize photon beam intensity of various beam energies based on presimulated Monte Carlo pencil beam dose distributions in patient anatomy. Finally, 3D dose distributions in six patients of different tumor sites were simulated with Monte Carlo method and compared between EMXRT plans and clinical IMRT plans. Compared to current IMRT technique, the proposed EMXRT method could offer a better paradigm for the radiotherapy of lung cancers and pediatric brain tumors in terms of normal tissue sparing and integral dose. For prostate, head and neck, spine, and thyroid lesions, the EMXRT plans were generally comparable to the IMRT plans. Our feasibility study indicated that lower energy (<6 MV) photon beams could be considered in modern radiotherapy treatment planning to achieve a more personalized care for individual patient with dosimetric gains. PMID:26977413

  3. Data Linkage to Improve Geriatric Oncology Research: A Feasibility Study.

    PubMed

    Lund, Jennifer L; Meyer, Anne-Marie; Deal, Allison M; Choi, Bong-Jin; Chang, YunKyung; Williams, Grant R; Pergolotti, Mackenzi; Guerard, Emily J; Muss, Hyman B; Sanoff, Hanna K

    2017-04-13

    Older adults (aged 65 years and older) diagnosed with cancer account for most cancer-related morbidity and mortality in the United States but are often underrepresented on clinical trials. Recent attention from a variety of professional, research, regulatory, and patient advocacy groups has centered on data linkage and data sharing as a means to capture patient information and outcomes outside of clinical trials to accelerate progress in the fight against cancer. The development of a more robust observational research data infrastructure would help to address gaps in the evidence base regarding optimal approaches to treating cancer among the growing and complex population of older adults. To demonstrate the feasibility of building such a resource, we linked information from a sample of older adults with cancer in North Carolina using three distinct, but complementary, data sources: (a) the Carolina Senior Registry, (b) the North Carolina Central Cancer Registry, and (c) North Carolina fee-for-service Medicare claims data. A description of the linkage process, metrics, and characteristics of the final cohort is reported. This study highlights the potential for data linkage to improve the characterization of health status among older adults with cancer and the possibility to conduct passive follow-up for outcomes of interest over time. Extensions of these linkage efforts in partnership with other institutions will enhance our ability to generate evidence that can inform the management of older adults with cancer. The Oncologist 2017;22:1-4.

  4. Conversion feasibility studies for the Grenoble high flux reactor

    SciTech Connect

    Mo, S.C.; Matos, J.E.

    1989-01-01

    Feasibility studies for conversion of the High Flux Reactor (RHF) at Grenoble France have been performed at the Argonne National Laboratory in cooperation with the Institut Laue-Langevin (ILL). The uranium densities required for conversion of the RHF to reduced enrichment fuels were computed to be 7.9 g/cm{sup 3} with 20% enrichment, 4.8 g/cm{sup 3} with 29% enrichment, and 2.8 g/cm{sup 3} with 45% enrichment. Thermal flux reductions at the peak in the heavy water reflector were computed to be 3% with 45% enriched fuel and 7% with 20% enriched fuel. In each case, the reactor's 44 day cycle length was preserved and no changes were made in the fuel element geometry. If the cladding thickness could be reduced from 0.38 mm to 0.30 mm, the required uranium density with 20% enrichment would be about 6.0 g/cm{sup 3} and the thermal flux reduction at the peak in the heavy water reflector would be about 7%. Significantly higher uranium densities are required in the RHF than in heavy water reactors with more conventional designs because the neutron spectrum is much harder in the RHF. Reduced enrichment fuels with the uranium densities required for use in the RHF are either not available or are not licensable at the present time. 6 refs., 6 figs., 3 tabs.

  5. Feasibility Study For A Spaceborne Ozone/Aerosol Lidar System

    NASA Technical Reports Server (NTRS)

    Campbell, Richard E.; Browell, Edward V.; Ismail, Syed; Dudelzak, Alexander E.; Carswell, Allan I.; Ulitsky, Arkady

    1997-01-01

    Because ozone provides a shield against harmful ultraviolet radiation, determines the temperature profile in the stratosphere, plays important roles in tropospheric chemistry and climate, and is a health risk near the surface, changes in natural ozone layers at different altitudes and their global impact are being intensively researched. Global ozone coverage is currently provided by passive optical and microwave satellite sensors that cannot deliver high spatial resolution measurements and have particular limitations in the troposphere. Vertical profiling DIfferential Absorption Lidars (DIAL) have shown excellent range-resolved capabilities, but these systems have been large, inefficient, and have required continuous technical attention for long term operations. Recently, successful, autonomous DIAL measurements have been performed from a high-altitude aircraft (LASE - Lidar Atmospheric Sensing Experiment), and a space-qualified aerosol lidar system (LITE - Laser In-space Technology Experiment) has performed well on Shuttle. Based on the above successes, NASA and the Canadian Space Agency are jointly studying the feasibility of developing ORACLE (Ozone Research with Advanced Cooperative Lidar Experiments), an autonomously operated, compact DIAL instrument to be placed in orbit using a Pegasus class launch vehicle.

  6. Moving with music for stroke rehabilitation: a sonification feasibility study.

    PubMed

    Scholz, Daniel S; Rhode, Sönke; Großbach, Michael; Rollnik, Jens; Altenmüller, Eckart

    2015-03-01

    Gross-motor impairments are common after stroke, but efficacious and motivating therapies for these impairments are scarce. We present a novel musical sonification therapy especially designed to retrain gross-motor functions. Four stroke patients were included in a clinical pre-post feasibility study and were trained with our sonification training. Patients' upper-extremity functions and their psychological states were assessed before and after training. The four patients were subdivided into two groups, with both groups receiving 9 days of musical sonification therapy (music group, MG) or a sham sonification training (control group, CG). The only difference between these training protocols was that, in the CG, no sound was played back. During the training the patients initially explored the acoustic effects of their arm movements, and at the end of the training the patients played simple melodies by moving their arms. The two patients in the MG improved in nearly all motor function tests after the training. They also reported in the stroke impact scale, which assesses well-being, memory, thinking, and social participation, to be less impaired by the stroke. The two patients in the CG did benefit less from the movement training. Taken together, musical sonification may be a promising therapy for impairments after stroke.

  7. Flight Performance Feasibility Studies for the Max Launch Abort System

    NASA Technical Reports Server (NTRS)

    Tarabini, Paul V.; Gilbert, Michael G.; Beaty, James R.

    2013-01-01

    In 2007, the NASA Engineering and Safety Center (NESC) initiated the Max Launch Abort System Project to explore crew escape system concepts designed to be fully encapsulated within an aerodynamic fairing and smoothly integrated onto a launch vehicle. One objective of this design was to develop a more compact launch escape vehicle that eliminated the need for an escape tower, as was used in the Mercury and Apollo escape systems and what is planned for the Orion Multi-Purpose Crew Vehicle (MPCV). The benefits for the launch vehicle of eliminating a tower from the escape vehicle design include lower structural weights, reduced bending moments during atmospheric flight, and a decrease in induced aero-acoustic loads. This paper discusses the development of encapsulated, towerless launch escape vehicle concepts, especially as it pertains to the flight performance and systems analysis trade studies conducted to establish mission feasibility and assess system-level performance. Two different towerless escape vehicle designs are discussed in depth: one with allpropulsive control using liquid attitude control thrusters, and a second employing deployable aft swept grid fins to provide passive stability during coast. Simulation results are presented for a range of nominal and off-nominal escape conditions.

  8. Feasibility studies of oncornavirus production in microcarrier cultures.

    PubMed

    Manousos, M; Ahmed, M; Torchio, C; Wolff, J; Shibley, G; Stephens, R; Mayyasi, S

    1980-06-01

    Studies conducted with virus-infected monolayer cell cultures have demonstrated the feasibility of producing several tumor-associated viruses in microcarrier (mc) cultures (Sephadex G50 beads treated with DEAE-chloride). The efficiency of cell adherence to mc varied with the cell type, the pH of the growth medium, and the stirring force applied to keep the mc in suspension. Most cells attached firmly to the mc and could not be removed easily with routine trypsinization procedures. Techniques using Enzar-T and Pronase were effective in detaching cells from mc in 10 to 15 min while retaining 95% cell viability. After detachment, Ficoll gradients were used for rapid and complete separation of viable cell suspensions from the mc. Retrovirus production in large volumes of mc cultures was investigated with periodic harvesting of growth fluids. Physical, biochemical, and biological properties of the Mason-Pfizer monkey virus and the RD114 virus recovered from the mc cultures were identical to those produced in conventional cultures. The utilization of mc has several applications in research and short-term cultures, but the as-yet-unsolved technical problems met were found to be serious limitations when attempting mass cell culturing on a long-term basis.

  9. OCT imaging of the larynx: a feasibility study

    NASA Astrophysics Data System (ADS)

    Bibas, Athanasios G.; Podoleanu, Adrian Gh.; Cucu, Radu G.; Bonmarin, Mathias; Dobre, George M.; Ward, Vicky; O'Dell, Edward; Boxer, Aaron; Gleeson, Michael J.; Jackson, David A.

    2003-07-01

    Laryngeal cancer is the most common primary head and neck malignancy and the need for early identification is very important for early treatment. Outpatient fiberoptic examination of the larynx is often unreliable in differentiating between benign, pre-malignant and malignant lesions, and therefore surgeons often have to rely on biopsies for a definite diagnosis. This is an invasive procedure requiring general anaesthesia and may have a detrimental effect on patient"s voice. The aim of our study was to investigate the feasibility of optical coherence tomography in imaging of the larynx, which will lay the foundations for investigating its ability to differentiate between benign and malignant disease. Tissue specimens from normal larynges were imaged with a polarisation sensitive OCT system at 850 nm and a second OCT system at 1300 nm. Both OCT systems were capable of providing both B-scan (longitudinal OCT) images as well as C-scan (en-face OCT or at constant depth) images. Imaged specimens were processed with standard histopathological techniques and sectioned in the plane of the B-scan OCT images. Haematoxylin-Eosin stained specimens were compared to the OCT images. Preliminary results showed good correlation between OCT images and histology sections in normal tissues.

  10. Fort Yukon, Chalkyitsik, & Venetie Biomass Boiler Feasibility Study

    SciTech Connect

    Greg Koontz, ME William A. Wall, PhD

    2009-03-31

    The Council of Athabascan Tribal Governments (CATG) is a consortium of ten Gwich'in and Koyukon Athabascan tribes settled in 10 remote villages and are linked by the Yukon River System. The CATG mission is to maintain the Yukon Flats region as Indian Country by asserting traditional rights and taking responsibility for developing tribal technical capacity to manage the land and resources. It is the intent of CATG to explore and develop all opportunities for a renewable and self-sufficient energy program for each of the villages. CATG envisions utilization of forest resources both for construction and energy as one of the best long-term strategies for integrating the economic goals for the region as well as supporting the cultural and social issues. The intent for this feasibility project is to focus specifically on biomass utilization for heat, first, and for future electrical generation within the region, second. An initial determination has already been made regarding the importance of wood energy as a primary source of renewable energy to displace diesel fuel in the Yukon Flats region. A desktop study of other potential renewable resources was conducted in 2006.

  11. A Feasibility Study of an Integral PWR for Space Applications

    SciTech Connect

    Grandis, S. De; Finzi, E.; Lombardi, C.V.; Mandelli, D.; Padovani, E.; Passoni, M.; Ricotti, M.E.; Santini, L.

    2004-07-01

    Fission space power systems are well suited to provide safe, reliable, economic and robust energy sources, in the order of 100 KWe. A preliminary feasibility study of a nuclear fission reactor is here presented with the following requirements: i) high reliability, ii) R and D program of moderate cost, iii) to be deployed within a reasonable period of time (e.g. 2015), iv) to be operated and controlled for a long time (10 years) without human intervention, v) possibly to be also used as a byproduct for some particular terrestrial application (or at least to share common technologies), vi) to start with stationary application. The driving idea is to extend as much as possible the PWR technology, by recurring to an integral type reactor. Two options are evaluated for the electricity production: a Rankine steam cycle and a Rankine organic fluid cycle. The neutronics calculation is based on WIMS code benchmarked with MCNP code. The reactivity control is envisaged by changing the core geometry. The resulting system appears viable and of reasonable size, well fit to the present space vector capabilities. Finally, a set of R and D needs has been identified: cold well, small steam turbines, fluid leakage control, pumps, shielding, steam generator in low-gravity conditions, self pressurizer, control system. A R and D program of reasonable extent may yield the needed answers, and some demanding researches are of interest for the new generation Light Water Reactors. (authors)

  12. Feasibility study of a soil-based rubberized CLSM.

    PubMed

    Wu, Jason Y; Tsai, Mufan

    2009-02-01

    The development of beneficial uses of recycled scrap tires is always in great demand around the world. The disposal of on-site surplus excavated soil and the production of standard engineering aggregates have also been facing increasing environmental and ecological challenges in congested islands, such as Taiwan. This paper presents an experimental study using recycled crumb rubber and native silty sand to produce a lightweight, soil-based, rubberized controlled low strength material (CLSM) for a bridge approach repair. To assess the technical feasibility of this material, the effects of weight ratios of cement-to-water (C/W) and water-to-solid (W/S), and of rubber content on the engineering properties for different mixtures were investigated. The presented test results include flowability, unit weight, strength, settlement potential, and bearing capacity. Based on the findings, we conclude that a soil-based rubberized CLSM with 40% sand by weight and an optimal design ratio of 0.7 for C/W and 0.35 for W/S can be used for the proposed bridge approach repair. Such a mixture has demonstrated acceptable flowability, strength, and bearing capacity. Its lower unit weight, negligible compressibility, and hydrocollapse potential also help ensure that detrimental settlement is unlikely to occur. The results illustrate a novel scheme of CLSM production, and suggest a beneficial alternative for the reduction of scrap tires as well as conservation of resources and environment.

  13. Space-based laser-driven MHD generator: Feasibility study

    NASA Technical Reports Server (NTRS)

    Choi, S. H.

    1986-01-01

    The feasibility of a laser-driven MHD generator, as a candidate receiver for a space-based laser power transmission system, was investigated. On the basis of reasonable parameters obtained in the literature, a model of the laser-driven MHD generator was developed with the assumptions of a steady, turbulent, two-dimensional flow. These assumptions were based on the continuous and steady generation of plasmas by the exposure of the continuous wave laser beam thus inducing a steady back pressure that enables the medium to flow steadily. The model considered here took the turbulent nature of plasmas into account in the two-dimensional geometry of the generator. For these conditions with the plasma parameters defining the thermal conductivity, viscosity, electrical conductivity for the plasma flow, a generator efficiency of 53.3% was calculated. If turbulent effects and nonequilibrium ionization are taken into account, the efficiency is 43.2%. The study shows that the laser-driven MHD system has potential as a laser power receiver for space applications because of its high energy conversion efficiency, high energy density and relatively simple mechanism as compared to other energy conversion cycles.

  14. Oral home telecare for adults with tetraplegia: a feasibility study.

    PubMed

    Yuen, Hon K; Pope, Charlene

    2009-01-01

    This pilot study investigated the feasibility of delivering an individualized program of oral home telecare training using PC-based, real-time interactive videoconferencing via the Internet to meet the unique challenges of dental care for people with tetraplegia. A home-based videoconferencing method was tested with two adults with tetraplegia and an occupational therapist (rehabilitation specialist). As part of the proposed rehabilitation training to improve independence in performing oral hygiene, adaptive devices (a rechargeable oscillating-rotating power toothbrush and a cordless oral irrigator) were introduced to facilitate oral care performance with interactive, Web-based instruction. Training was conducted once a week for 4 weeks. The oral home telecare experience was evaluated using a questionnaire and in-depth interviews after the training. Both subjects were satisfied with the oral home telecare services and were enthusiastic about using the services without major difficulty after having previously experienced barriers to dental care. In addition to their positive perceptions about videoconferencing, the subjects suggested adaptations and identified unexpected potential uses for interactive videoconferencing. The use of interactive videoconferencing as a mode of oral hygiene training may lead to a change in oral hygiene service delivery methods, improving accessibility to geographically dispersed populations with tetraplegia. Oral home telecare offers strategies to decrease physical barriers and communication difficulties that correspond to recommendations to improve the quality of dental health services for people with tetraplegia.

  15. Feasibility study of medical isotope production at Sandia National Laboratories

    SciTech Connect

    Massey, C.D.; Miller, D.L.; Carson, S.D.

    1995-12-01

    In late 1994, Sandia National Laboratories in Albuquerque, New Mexico, (SNL/NM), was instructed by the Department of Energy (DOE) Isotope Production and Distribution Program (IPDP) to examine the feasibility of producing medically useful radioisotopes using the Annular Core Research Reactor (ACRR) and the Hot Cell Facility (HCF). Los Alamos National Laboratory (LANL) would be expected to supply the targets to be irradiated in the ACRR. The intent of DOE would be to provide a capability to satisfy the North American health care system demand for {sup 99}Mo, the parent of {sup 99m}Tc, in the event of an interruption in the current Canadian supply. {sup 99m}Tc is used in 70 to 80% of all nuclear medicine procedures in the US. The goal of the SNL/NM study effort is to determine the physical plant capability, infrastructure, and staffing necessary to meet the North American need for {sup 99}Mo and to identify and examine all issues with potential for environmental impact.

  16. Feasibility study of heavy ion physics program at NICA

    NASA Astrophysics Data System (ADS)

    Batyuk, P. N.; Kekelidze, V. D.; Kolesnikov, V. I.; Rogachevsky, O. V.; Sorin, A. S.; Voronyuk, V. V.

    2016-07-01

    There are strong experimental and theoretical evidences that in collisions of heavy ions at relativistic energies nuclear matter undergoes a phase transition to the deconfined state—Quark Gluon Plasma. The caused energy region of such transition was not found at high energy at SPS and RHIC and search for this energy is shifted to lower energies, which will be covered by the future NICA (Dubna), FAIR (Darmstadt) facilities and BES II at RHIC. Fixed target and collider experiments at the NICA facility will work at the energy range from a few AGeV up to √ {{S_{NN}}} = 11GeV GeV and will study the most interesting area on the nuclear matter phase diagram. The most remarkable results were observed in the study of collective phenomena occurring in the early stage of nuclear collisions. Investigation of the collective flow will provide information on Equation of State (EoS) for nuclear matter. Study of the Event-by-Event fluctuations and correlations can give us signals of critical behavior of the system. Femtoscopy analysis provides the space-time history of the collisions. Also, it was found that baryon stopping power revealing itself as a "wiggle" in excitation function of curvature of the (net)proton rapidity spectrum relates to the order of the phase transition. The available observations of an enhancement of dilepton rates at low invariant masses may serve as a signal of the chiral symmetry restoration in hot and dense matter. Due to this fact, measurements of the dilepton spectra are considered to be an important part of the NICA physics program. The study of strange particles and hypernuclei production gives additional information on the EoS and "strange" axis of the QCD phase diagram. In this paper a feasibility of the considered investigations is shown by the detailed Monte Carlo simulations applied to the planned experiments (BM@N, MPD) at NICA.

  17. Crosswell electromagnetic imaging for geothermal reservoir characterization - a feasibility study

    NASA Astrophysics Data System (ADS)

    Samrock, Friedemann; Saar, Martin O.

    2016-04-01

    Most regions in the world do not have ready access to natural convective hydrothermal resources. To use deep geothermal heat as a viable energy resource in low-permeability formations, permeable fracture networks have to be created artificially to enable deep fluid circulation for advective heat transport to a production well. Such generation of enhanced geothermal systems (EGS) is studied in the "Deep Underground Geothermal (DUG)" laboratory at the Grimsel pass, Switzerland. Here, an underground experiment is conducted by hydraulically stimulating a pre-existing shear zone within crystalline rock. The objectives of this project are to better describe and understand the processes acting during reservoir generation. We perform a feasibility study to evaluate the capability of low-frequency crosswell electromagnetic (EM) tomography for mapping of stimulation-induced changes in electrical conductivity. First numerical results show that crosswell EM data are generally sensitive to the inter-well conductivity distribution, which is affected by properties such as interconnected porosity, permeability and the presence of fluids. It thereby provides important information for characterization of potential EGS reservoirs. We present a 3-D forward modeling and inversion study using synthetic data and under realistic conditions, these include the true borehole spacing and the observed electromagnetic noise level in the DUG laboratory. Based on these results we discuss the system requirements and the capability of crosswell EM to recover the inter-well structure and stimulation-induced changes. Besides the numerical study we report on the current status of instrumentation and realization of crosswell EM measurements at the DUG laboratory.

  18. Feasibility study of fluxless brazing cemented carbides to steel

    NASA Astrophysics Data System (ADS)

    Tillmann, W.; Sievers, N.

    2017-03-01

    One of the most important brazing processes is the joints between cemented carbides and steel for the tool industry such as in rotary drill hammers or saw blades. Even though this technique has already been used for several decades, defects in the joint can still occur and lead to quality loss. Mostly, the joining process is facilitated by induction heating and the use of a flux to enhance the wetting of the filler alloy on the surface of the steel and cemented carbide in an ambient atmosphere. However, although the use of flux enables successful joining, it also generates voids within the joint, which reduces the strength of the connection while the chemicals within the flux are toxic and polluting. In this feasibility study, a fluxless brazing process is used to examine the joint between cemented carbides and steel for the first time. For this, ultrasound is applied during induction heating to enable the wetting between the liquid filler metal and the surfaces of the cemented carbide and steel. The ultrasound generates cavitations within the liquid filler metal, which remove the oxides from the surface. Several filler metals such as a silver based alloy Ag449, pure Zn, and an AlSi-alloy were used to reduce the brazing temperature and to lower the thermal residual stresses within the joint. As a result, every filler metal successfully wetted both materials and led to a dense connection. The ultrasound has to be applied carefully to prevent a damage of the cemented carbide. In this regard, it was observed that single grains of the cemented carbide broke out and remained in the joint. This positive result of brazing cemented carbides to steel without a flux but using ultrasound, allows future studies to focus on the shear strength of these joints as well as the behavior of the thermally induced residual stresses.

  19. Pueblo of Jemez Geothermal Feasibility Study Fianl Report

    SciTech Connect

    S.A. Kelley; N. Rogers; S. Sandberg; J. Witcher; J. Whittier

    2005-03-31

    This project assessed the feasibility of developing geothermal energy on the Pueblo of Jemez, with particular attention to the Red Rocks area. Geologic mapping of the Red Rocks area was done at a scale of 1:6000 and geophysical surveys identified a potential drilling target at a depth of 420 feet. The most feasible business identified to use geothermal energy on the reservation was a greenhouse growing culinary and medicinal herbs. Space heating and a spa were identified as two other likely uses of geothermal energy at Jemez Pueblo. Further geophysical surveys are needed to identify the depth to the Madera Limestone, the most likely host for a major geothermal reservoir.

  20. Laser engines operating by resonance absorption. [thermodynamic feasibility study

    NASA Technical Reports Server (NTRS)

    Garbuny, M.; Pechersky, M. J.

    1976-01-01

    Basic tutorial article on the thermodynamic feasibility of laser engines at the present state of the art. Three main options are considered: (1) laser power applied externally to a heat reservoir (boiler approach); (2) internal heating of working fluid by resonance absorption; and (3) direct conversion of selective excitation into work. Only (2) is considered practically feasible at present. Basic concepts and variants, efficiency relations, upper temperature limits of laser engines, selection of absorbing gases, engine walls, bleaching, thermodynamic cycles of optimized laser engines, laser-powered turbines, laser heat pumps are discussed. Photon engines and laser dissociation engines are also considered.

  1. Comprehensive Renewable Energy Feasibility Study for Sealaska Corporation

    SciTech Connect

    Robert Lynette; John Wade: Larry Coupe

    2006-06-30

    The purposes of this project were: (1) to conduct a comprehensive feasibility study to determine the potential sustainability of wind and/or small hydroelectric power plants on Southeast Alaska native village lands, and (2) to provide the villages with an understanding of the requirements, costs, and benefits of developing and operating wind or small hydroelectric power plants. The program was sponsored by the Tribal Energy program, Office of Energy Efficiency and Renewable Energy, US Department of Energy. The Contractor was Sealaska Corporation, the Regional Native Corporation for Southeast Alaska that includes 12 village/urban corporations. Most villages are isolated from any central electric transmission and use diesel-electric systems for power generation, making them prime candidates for deploying renewable energy sources. Wind Energy - A database was assembled for all of the candidate sites in SE Alaska, including location, demographics, electricity supply and demand, existing and planned transmission interties with central generation, topographical maps, macro wind data, and contact personnel. Field trips were conducted at the five candidate villages that were deemed most likely to have viable wind resources. Meetings were held with local village and utility leaders and the requirements, costs, and benefits of having local renewable energy facilities were discussed. Two sites were selected for anemometry based on their needs and the probability of having viable wind resources – Yakutat and Hoonah. Anemometry was installed at both sites and at least one year of wind resource data was collected from the sites. This data was compared to long-term data from the closest weather stations. Reports were prepared by meteorologist John Wade that contains the details of the measured wind resources and energy production projections. Preliminary financial analysis of hypothetical wind power stations were prepared to gauge the economic viability of installing such

  2. Feasibility Study for Renewable Energy Development on Tribal Lands

    SciTech Connect

    John Hendrix, Project Director; Charles Weir, Project Manager; Dr. John Plodinec, Technology Advisor; Dr. Steve Murray, Economic Advisor

    2005-07-21

    Project Objective: The Mississippi Band of Choctaw Indians (MBCI) conducted a study of the feasibility of siting a renewable energy biomass-based installation on tribal lands. The purpose of the study was to determine whether such an installation can be economically sustainable, as well as consistent with the cultural, social, and economic goals of the Tribe. Scope: To achieve the goal of the feasibility study, the following tasks were carried out: (1) Resource availability assessment--The objective of this assessment was to determine the availability of both poultry litter and wood residues for use in the proposed facility. (2) Power utilization assessment--The objective of this assessment was to determine the potential market size for power produced, the existing infrastructure for delivering power to that market, and the costs and economic returns for doing so. (3) Technology review--The objective of this review was to identify one, or more, technical options for detailed economic and technical assessment. The study considered a range of feedstock and product mixtures of poultry litter; wood residues as feedstock; and electrical power and other ancillary products as outputs. Distributed power sources was also examined. Technologies ranging from gasification to systems that produce both power and value-added chemicals were considered. Technologies selected for detailed review were those that can be sized to process the amount of available feed (poultry litter, or poultry litter and wood residues), and that also appear to make economic sense in terms of the value of their inputs. The technology review leaned heavily on the experience from similar prior DOE projects, particularly those conducted by the National Renewable Energy Laboratory (NREL). NREL was involved in a consultative role, so that the project team could leverage their experience. (4) Systems Design(s)--Based on the technology review, a pre-conceptual design for an installation was developed. This

  3. The Distinctive Features of a Feasibility Study: Objectives and Guiding Questions.

    PubMed

    Orsmond, Gael I; Cohn, Ellen S

    2015-07-01

    In this article, we highlight the distinctive features of a feasibility study, identify the main objectives and guiding questions of a feasibility study, and illustrate the use of these objectives. We synthesized the research methods literature related to feasibility studies to identify five overarching objectives of feasibility studies that focus on social and behavioral interventions. Feasibility studies are designed to answer the overarching question: Can it work? The main objectives of feasibility include the assessment of recruitment capability and resulting sample characteristics, data collection procedures and outcome measures, acceptability of the intervention and study procedures, resources and ability to manage and implement the study and intervention, and preliminary evaluation of participant responses to the intervention. For each objective, we identified follow-up questions designed to assist the researchers to understand barriers to the ultimate success of the research.

  4. Automated estimation of hip prosthesis migration: a feasibility study

    NASA Astrophysics Data System (ADS)

    Vandemeulebroucke, Jef; Deklerck, Rudi; Temmermans, Frederik; Van Gompel, Gert; Buls, Nico; Scheerlinck, Thierry; de Mey, Johan

    2013-09-01

    A common complication associated with hip arthoplasty is prosthesis migration, and for most cemented components a migration greater than 0.85 mm within the first six months after surgery, are an indicator for prosthesis failure. Currently, prosthesis migration is evaluated using X-ray images, which can only reliably estimate migrations larger than 5 mm. We propose an automated method for estimating prosthesis migration more accurately, using CT images and image registration techniques. We report on the results obtained using an experimental set-up, in which a metal prosthesis can be translated and rotated with respect to a cadaver femur, over distances and angles applied using a combination of positioning stages. Images are first preprocessed to reduce artefacts. Bone and prosthesis are extracted using consecutive thresholding and morphological operations. Two registrations are performed, one aligning the bones and the other aligning the prostheses. The migration is estimated as the difference between the found transformations. We use a robust, multi-resolution, stochastic optimization approach, and compare the mean squared intensity differences (MS) to mutual information (MI). 30 high-resolution helical CT scans were acquired for prosthesis translations ranging from 0.05 mm to 4 mm, and rotations ranging from 0.3° to 3° . For the translations, the mean 3D registration error was found to be 0.22 mm for MS, and 0.15 mm for MI. For the rotations, the standard deviation of the estimation error was 0.18° for MS, and 0.08° for MI. The results show that the proposed approach is feasible and that clinically acceptable accuracies can be obtained. Clinical validation studies on patient images will now be undertaken.

  5. CVD diamond Brewster window: feasibility study by FEM analyses

    NASA Astrophysics Data System (ADS)

    Aiello, G.; Grossetti, G.; Meier, A.; Scherer, T.; Schreck, S.; Spaeh, P.; Strauss, D.; Vaccaro, A.

    2012-09-01

    Chemical vapor deposition (CVD) diamond windows are a crucial component in heating and current drive (H&CD) applications. In order to minimize the amount of reflected power from the diamond disc, its thickness must match the desired beam wavelength, thus proper targeting of the plasma requires movable beam reflectors. This is the case, for instance, of the ITER electron cyclotron H&CD system. However, looking at DEMO, the higher heat loads and neutron fluxes could make the use of movable parts close to the plasma difficult. The issue might be solved by using gyrotrons able to tune the beam frequency to the desired resonance, but this concept requires transmission windows that work in a given frequency range, such as the Brewster window. It consists of a CVD diamond disc brazed to two copper cuffs at the Brewster angle. The brazing process is carried out at about 800°C and then the temperature is decreased down to room temperature. Diamond and copper have very different thermal expansion coefficients, therefore high stresses build up during the cool down phase that might lead to failure of the disc. Considering also the complex geometry of the window with the skewed position of the disc, analyses are required in the first place to check its feasibility. The cool down phase was simulated by FEM structural analyses for several geometric and constraint configurations of the window. A study of indirect cooling of the window by water was also performed considering a HE11 mode beam. The results are here reported.

  6. Gasoline from coal in the State of Illinois: feasibility study

    SciTech Connect

    Not Available

    1981-01-01

    A detailed study was made of the feasibility of producing approximately 12,000 barrels per day of gasoline from high sulfur Illinois coal. The project was to be based on indirect liquefaction of coal by producing methanol and converting the methanol to raw gasoline. The plant design was based on proven processes: including atmospheric Koppers-Totzek type coal gasification, Rectisol gas purification, Claus and Scot sulfur recovery, and ICI low pressure methanol synthesis, all of which have been used in large commercial plants; and the fixed bed Mobil MTG process, which has been demonstrated in a four barrel per day pilot plant, to convert methanol into gasoline. The plant was designed to meet all federal and state regulations pertaining to environmental protection. The plant would cost approximately $1.27 billion (1981 dollars). Annual operating costs would total $243 million (1981 dollars). It has been determined that the project would not be viable in the present economic environment. Using 1981 dollars, and recognizing the present average refinery selling price in the mid-West of gasoline produced from crude oil is about $42 per barrel, the following gasoline prices have been calculated. For example, if the project were financed entirely by equity funds, then the selling price of gasoline would have to be $122 per barrel in a moderately inflating general economy in order to obtain a rate of return of 10% on the investment. The selling price would be lowered to $106 per barrel if no inflation is assumed. If 75% of the project were financed by debt at 16% interest, and the real price of coal and gasoline increased by 3% more than the general inflation rate, the selling price in 1981 dollars would be $76 per barrel in a moderately inflating economy. As the real price of gasoline increases in the future, this project and the related economics should be reviewed.

  7. District heating/cooling feasibility study for Jamestown, New York

    SciTech Connect

    Oliker, I.; Buffa, W.; Harms, R.; Preston, E.

    1982-12-01

    The results of the District Heating/Cooling Feasibility Study for Jamestown, NY are presented. The heat source for the system is a power plant located within the city limits. Several options for the extraction of heat from the power plant are developed and heat balances are presented. The options are based on the development of a hot water district heating system. The geography and climate of the area are discussed and the primary potential district heat district is described. The heat load assessment was based on fuel consumption data collected from a sampling of various types of structures and operations. The methodology is presented in detail followed by the block-by-block results which include the heated floor space, the annual total fuel consumed, the annual fuel consumed for comfort use, and the peak heat rate demands. The heating fuel demand and consumption for most of the major industries in the city is presented. A transmission and distribution system is developed to deliver heat from the power plant to the district heating customers. The piping design is described and the proposed pipe routing for the primary district is presented. Cost estimates are presented for the different district heating options developed. The cost of heat from the Jamestown district heating system has been determined using the required revenue approach to determine the minimum rate the utility must charge for district heat in order to break even. An analysis has also been performed to determine the maximum allowable charge for district heat that would allow consumers to recover their retrofit expenses in a five year period.

  8. Feasibility study for production of anhydrous alcohol from corn

    SciTech Connect

    Not Available

    1980-12-01

    The feasibility of establishing a facility to produce fuel grade alcohol from corn to be located within an existing soybean processing plant in Mexico, Missouri has been studied. The alcohol producing industries, technical literature, various available process technologies, and industry consultants were surveyed. A process consisting of dry milling corn, continuous cooking, batch fermentation and azeotropic distillation was selected as the most suitable technique for the MFA's venture. It was determined that a production rate of 6288 bushels of corn per day yielding 5,200,000 gallons per year of fuel grade ethanol plus the capability to up grade an additional 500,000 gallons per year of low grade alcohol from off-site production facilities was the best design for the space and facilities available within the existing Mexico, Missouri soybean plant while economically utilizing existing buildings and plant area to the best advantage. A factored estimate of expected capital costs for the gasohol demonstration plant was made based on surveys of the plant site and furnished plant drawings, approximate prices for major items of process equipment and estimated construction and erection costs. This cost, with a plus or minus 20% accuracy, was determined to be $8,852,000.00. Revenues were estimated based on the selling price of 200 proof fuel grade alcohol and distillers dried grains with solubles (DDGS). A number of cases were reviewed to demonstrate the sensitivity of plant operating income to various prices for corn, alcohol and DDGS and to assess the effect of inflation over the useful life of the plant. Based on the estimated plant cost and the various cases of operating income, an economic analysis was performed employing a profitability index criterion of discounted cash flow to determine an interest rate of return on the plant investment.

  9. Feasibility study report for the 200-BP-1 operable unit

    SciTech Connect

    Not Available

    1993-06-01

    This feasibility study examines a range of alternatives and provides recommendations for selecting a preferred alternative for remediating contamination at the 200-BP-1 operable unit. The 200-BP-1 operable unit is located in the center of the Hanford Site along the northern boundary of the 200 East Area. The 241-BY Tank Farm is located immediately to the south of the operable unit. 200-BP-1 is a source operable unit with contaminated soils associated primarily with nine inactive cribs (known as the 216-B cribs). These cribs were used for disposal of low-level radioactive liquid waste from U Plant uranium recovery operations, and waste storage tank condensate from the adjacent 241-BY Tank Farm. The cribs used for disposal of U Plant waste were in operation from 1955--1965, and the cribs used for disposal of tank condensate were in operation from 1965--1975. In addition to the cribs, four unplanned releases of radioactive materials have occurred within the operable unit. Contaminated surface soils associated with the unplanned releases have been consolidated over the cribs and covered with clean soil to reduce contaminant migration and exposure. Discharge of wastes to the cribs has resulted in soil and groundwater contamination. The groundwater is being addressed as part of the 200 East Aggregate Area, groundwater operable unit. Contaminated soils at the site can be categorized by the types of contaminants, their distribution in the soil column, and the risk posed by the various potential exposure pathways. Below the clean soil cover, the near surface soils contain low-levels of contamination with cesium-137, radium-226, strontium-90, thorium-228, and uranium. The lifetime incremental cancer risk associated with these soils if they were exposed at the surface is 9{times}10{sup {minus}5}.

  10. Pueblo of Laguna Utility Authority Renewable Energy Feasibility Study

    SciTech Connect

    Carolyn Stewart, Red Mountain Tribal Energy

    2008-03-31

    The project, “Renewable Energy Feasibility Study” was designed to expand upon previous work done by the Tribe in evaluating utility formation, generation development opportunities, examining options for creating self-sufficiency in energy matters, and integrating energy management with the Tribe’s economic development goals. The evaluation of project locations and economic analysis, led to a focus primarily on solar projects.

  11. Audiographic Communication for Distance Counselling: A Feasibility Study.

    ERIC Educational Resources Information Center

    Collie, Kate; Cubranic, Davor; Long, Bonita C.

    2002-01-01

    Explores the feasibility of conducting counseling or therapy that involves image making via the Internet, and seeks to identify new issues to consider when implementing online counseling services. Content analysis yielded the following significant issues: concerns about technical failure, relevance for people with disabilities, the need for…

  12. The Training of Genito Urinary Technicians; A Feasibility Study.

    ERIC Educational Resources Information Center

    Washington State Dept. of Social and Health Services, Olympia. Health Manpower Project.

    Questionnaires were mailed to all (101) practicing urologists in Washington to determine the feasibility of training genito urinary technicians and the desirability of offering specific courses as a Health Manpower Project. This mailing was preceeded by exploratory personal interviews and pretest mailback questionnaires. From the 52 respondent's…

  13. Optically exciting a magnetic memory - A feasibility study

    NASA Technical Reports Server (NTRS)

    Grismore, F. L.; Rhodes, J. E.

    1969-01-01

    Rare earth iron garnets were used in experiments to determine the feasibility of optically pumping a magnetic material to effect the switching process. It was found that rare earth garnets are limited by an absorption edge, only terbium and dysprosium offer a possibility of pumping at energies below the conduction band edge.

  14. Feasibility study: Atmospheric general circulation experiment, volume 2

    NASA Technical Reports Server (NTRS)

    Homsey, R. J. (Editor)

    1981-01-01

    The feasibility analysis of the atmospheric general circulation experiment (AGCE) are documented. The analysis performed in each technical area, the rationale and substantiation for the design approaches selected for the hardware, and the design details for the baseline AGCE are presented.

  15. A 30/20 GHz FSS feasibility study

    NASA Technical Reports Server (NTRS)

    1987-01-01

    The near term feasibility of direct-to-subscriber services were determined using the 30/20 GHz Fixed Satellite Service (FSS) frequency bands. Those technologies which need to be further developed before such a system can be implemented, were identified. To determine this feasibility, dozens of potential applications were examined for their near-term viability, and the subscriber base of three promising applications were estimated. The system requirements, terminal design, and satellite architecture were all investigated to determine whether a 30/20 GHz FSS system is technically and economically feasible by mid-1990s. It was concluded that such a system is feasible, although maturation of some technologies is needed. This system would likely consist of one or two multibeam satellites serving hub/spoke networks of simple user terminals and more complex, mutli-channel terminals of the service providers. Rain compensation would be accomplished non-adaptively through the use of coding, nonuniform satellite TWT power that is a function of a beam's anticipated downlink fading, and signal regeneration of traffic to the wettest climate regions. It was estimated that a potential market of almost two million users could exist in in the mid-1990s time frame for home banking and financial services via Ka-band satellites.

  16. Feasibility Study for Aviation Programs at Hudson Valley Community College.

    ERIC Educational Resources Information Center

    Buckley, Edward P.

    This is a report on a survey to determine the feasibility of establishing aviation training programs at a New York community college. It examines existing sources, and present and future needs for commercial pilots, aviation mechanics, and airline stewardesses. Among the conclusions are the discovery that the aviation industry is on the threshold…

  17. Livingston Parish Landfill Methane Recovery Project (Feasibility Study)

    SciTech Connect

    White, Steven

    2012-11-15

    The Woodside Landfill is owned by Livingston Parish, Louisiana and is operated under contract by Waste Management of Louisiana LLC. This public owner/private operator partnership is commonplace in the solid waste industry today. The landfill has been in operation since approximately 1988 and has a permitted capacity of approximately 41 million cubic yards. Based on an assumed in-place waste density of 0.94 ton per cubic yard, the landfill could have an expected design capacity of 39.3 million tons. The landfill does have an active landfill gas collection and control system (LFGCCS) in place because it meets the minimum thresholds for the New Source Performance Standards (NSPS). The initial LFGCS was installed prior to 2006 and subsequent phases were installed in 2007 and 2010. The Parish received a grant from the United States Department of Energy in 2009 to evaluate the potential for landfill gas recovery and utilization at the Woodside Landfill. This includes a technical and economic feasibility study of a project to install a landfill gas to energy (LFGTE) plant and to compare alternative technologies. The LFGTE plant can take the form of on-site electrical generation, a direct use/medium Btu option, or a high-Btu upgrade technology. The technical evaluation in Section 2 of this report concludes that landfill gas from the Woodside landfill is suitable for recovery and utilization. The financial evaluations in sections 3, 4, and 5 of this report provide financial estimates of the returns for various utilization technologies. The report concludes that the most economically viable project is the Electricity Generation option, subject to the Parish’s ability and willingness to allocate adequate cash for initial capital and/or to obtain debt financing. However, even this option does not present a solid return: by our estimates, there is a 19 year simple payback on the electricity generation option. All of the energy recovery options discussed in this report

  18. Immediate changes in temporomandibular joint opening and pain following vibration therapy: a feasibility pilot study

    PubMed Central

    Muir, Brad; Brown, Courtney; Brown, Tara; Tatlow, Dionne; Buhay, Jeremy

    2014-01-01

    Objective The purpose of this pilot study was to determine the scientific and process feasibility in an effort to direct future larger trials. Methods: Scientific Feasibility: Twelve subjects were randomly allocated to an intervention and a control group. The intervention protocol consisted of intraoral vibration therapy on the muscles of mastication bilaterally for a period of 1 minute per muscle. Process Feasibility: Several feasibility outcomes were examined including recruitment and retention rates and consent. Results: Scientific Feasibility: Large effect sizes were generated for both mouth opening and VAS in favour of the intervention group. Process Feasibility: a recruitment ratio of 2.3 respondents to 1 participant was determined, along with a retention to loss ratio of 13:1 and a consent to loss ratio of 12:0. Conclusion: Scientific Feasibility: The scientific results should be interpreted with caution due to the small sample sizes employed. The study seems to support the scientific feasibility of a future larger single treatment trial. Process Feasibility: Recruitment and retention rates and ratios seem to support future studies. Utilizing the feasibility results of the current study to direct a future larger multiple treatment trial consistent with other comparable TMD studies however is limited. PMID:25550672

  19. Millimeter Wave Moisture Sounder Feasibility Study: The Effect of Cloud and Precipitation on Moisture Retrievals.

    DTIC Science & Technology

    1985-03-08

    D-A162 231 MILLIMETER WAVE MOISTURE SOUNDER FEASIBILITY STUDY- THE i/1 EFFECT OF CLOUD A (U) ATMOSPHERIC AND ENVIRONMENTAL RESEARCH INC CAMBRIDGE MA...34 ,,; - -., ,..-.,- -, ,.. . : .,,- ,.. ,- - - , . .. .-. ,=, .-,o.. .- .-,o ,-N . ,.-,."...,- ,,, .. .,..; .. ,., .:°B,.. ’ AFGL-TR-85-0040 MILLIMETER WAVE MOISTURE SOUNDER FEASIBILITY STUDY: THE EFFECT OF...REPORT A PERIOD COVERED Millimeter Wave Moisture Sounder Feasibility Final Report Study: The Effect of Cloud and Precipitation 8 Aug 1984-7 Feb 1985 on

  20. Laparoscopic anatrophic nephrolithotomy: feasibility study in a chronic porcine model.

    PubMed

    Kaouk, Jihad H; Gill, Inderbir S; Desai, Mihir M; Banks, Kevin L W; Raja, Shanker S; Skacel, Marek; Sung, Gyung Tak

    2003-02-01

    PURPOSE Anatrophic nephrolithotomy performed via open surgery involves incising the renal parenchyma along an avascular plane to remove a large, complex renal stone. We determined the feasibility of performing laparoscopic anatrophic nephrolithotomy in a survival porcine model. Furthermore, we present a novel technique of creating a staghorn calculus in the porcine model. MATERIALS AND METHODS After developing the technique in 3 pigs the survival study was performed in 10 consecutive animals. The procedure comprised 2 aspects. 1) We developed an animal model for staghorn calculi by retrograde injection of polyurethane (Fomo Products, Inc., Norton, Ohio) into the renal pelvis through a ureteral catheter. For a 2-week period the staghorn calculus was allowed to create hydronephrosis. 2) Laparoscopic anatrophic nephrolithotomy was done, involving control of the renal artery and vein, in situ renal hypothermia with ice slush in 1 animal, lateral renal parenchymal incision, stone extraction and suture repair of the incised collecting system and renal parenchyma. RESULTS Synthetic stone formation and laparoscopic anatrophic nephrolithotomy were successful in all 10 animals, including 1 that underwent staged bilateral anatrophic nephrolithotomy. Mean operative time for anatrophic nephrolithotomy was 125 minutes. Mean blood loss was 68 cc and mean warm ischemia time was 30 minutes (range 23 to 39). A residual small pelvicaliceal calculus was noted postoperatively in the initial 3 cases only. Thereafter, routine intraoperative ultrasonography and flexible endoscopy were done for stone localization, resulting in a stone-free rate of 100% in all 7 remaining animals. Diethylenetriamine pentaacetic acid renal scans documented improvement in the glomerular filtration rate from a mean of 26.4 ml. per minute after stone creation and hydronephrosis to 54.8 ml. per minute 4 to 5 weeks after laparoscopic anatrophic nephrolithotomy. CONCLUSIONS Laparoscopic techniques can be applied

  1. Fetal development of the corpus callosum: Insights from a 3T DTI and tractography study in a patient with segmental callosal agenesis.

    PubMed

    Scola, Elisa; Sirgiovanni, Ida; Avignone, Sabrina; Cinnante, Claudia Maria; Biffi, Riccardo; Fumagalli, Monica; Triulzi, Fabio

    2016-10-01

    Commissural embryology mechanisms are not yet completely understood. The study and comprehension of callosal dysgenesis can provide remarkable insights into embryonic or fetal commissural development. The diffusion tensor imaging (DTI) technique allows the in vivo analyses of the white-matter microstructure and is a valid tool to clarify the disturbances of brain connections in patients with dysgenesis of the corpus callosum (CC). The segmental callosal agenesis (SCAG) is a rare partial agenesis of the corpus callosum (ACC). In a newborn with SCAG the DTI and tractography analyses proved that the CC was made of two separate segments consisting respectively of the ventral part in the genu and body of the CC, connecting the frontal lobes, and the dorsal part in the CC splenium and the attached hippocampal commissure (HC), connecting the parietal lobes and the fornix. These findings support the embryological thesis of a separated origin of the ventral and the dorsal parts of the CC.

  2. Prognostic value of changes in resting-state functional connectivity patterns in cognitive recovery after stroke: A 3T fMRI pilot study

    PubMed Central

    Dacosta-Aguayo, R; Graña, M; Savio, A; Fernández-Andújar, M; Millán, M; López-Cancio, E; Cáceres, C; Bargalló, N; Garrido, C; Barrios, M; Clemente, I C; Hernández, M; Munuera, J; Dávalos, A; Auer, T; Mataró, M

    2014-01-01

    Resting-state studies conducted with stroke patients are scarce. First objective was to explore whether patients with good cognitive recovery showed differences in resting-state functional patterns of brain activity when compared to patients with poor cognitive recovery. Second objective was to determine whether such patterns were correlated with cognitive performance. Third objective was to assess the existence of prognostic factors for cognitive recovery. Eighteen right-handed stroke patients and eighteen healthy controls were included in the study. Stroke patients were divided into two groups according to their cognitive improvement observed at three months after stroke. Probabilistic independent component analysis was used to identify resting-state brain activity patterns. The analysis identified six networks: frontal, fronto-temporal, default mode network, secondary visual, parietal, and basal ganglia. Stroke patients showed significant decrease in brain activity in parietal and basal ganglia networks and a widespread increase in brain activity in the remaining ones when compared with healthy controls. When analyzed separately, patients with poor cognitive recovery (n = 10) showed the same pattern as the whole stroke patient group, while patients with good cognitive recovery (n = 8) showed increased activity only in the default mode network and fronto-temporal network, and decreased activity in the basal ganglia. We observe negative correlations between basal ganglia network activity and performance in Semantic Fluency test and Part A of the Trail Making Test for patients with poor cognitive recovery. A reverse pattern was observed between frontal network activity and the abovementioned tests for the same group. Hum Brain Mapp 35:3819–3831, 2014. PMID:24523262

  3. Feasibility study of ZnO nanowire made accelerometer

    NASA Astrophysics Data System (ADS)

    Kim, Hyun-Chan; Ko, Hyun-U.; Song, Sangho; Yun, Youngmin; Kim, Jaehwan

    2016-04-01

    Vertically aligned arrays of ZnO nanowire can be used for many applications such as energy harvesters, UV sensors and mechanical sensors. Here we report the feasibility of a miniaturized accelerometer made with ZnO nanowire. For improving the sensitivity of miniaturized piezoelectric accelerometer, size of piezoelectric ceramic should be large which results in heavy accelerometer and low resonance frequency. To resolve the problem for the miniaturized accelerometer fabrication, ZnO nanowire is chosen. ZnO nanowire, which has piezoelectric property with Wurtzite structure. Since it has high aspect ratio, the use of ZnO nanowire leads to increase deformation and piezoelectric response output. The vertically ZnO nanowire array is grown on a copper substrate by hydrothermal synthesis process. Detail Fabrication process of the miniaturized accelerometer is illustrated. To prove the feasibility of the fabricated accelerometer, dynamic response test is performed in comparison with a commercial accelerometer.

  4. Long-range eye tracking: A feasibility study

    SciTech Connect

    Jayaweera, S.K.; Lu, Shin-yee

    1994-08-24

    The design considerations for a long-range Purkinje effects based video tracking system using current technology is presented. Past work, current experiments, and future directions are thoroughly discussed, with an emphasis on digital signal processing techniques and obstacles. It has been determined that while a robust, efficient, long-range, and non-invasive eye tracking system will be difficult to develop, such as a project is indeed feasible.

  5. FEASIBILITY STUDY OF PRESSURE PULSING PIPELINE UNPLUGGING TECHNOLOGIES FOR HANFORD

    SciTech Connect

    Servin, M. A.; Garfield, J. S.; Golcar, G. R.

    2012-12-20

    The ability to unplug key waste transfer routes is generally essential for successful tank farms operations. All transfer lines run the risk of plugging but the cross site transfer line poses increased risk due to its longer length. The loss of a transfer route needed to support the waste feed delivery mission impacts the cost and schedule of the Hanford clean up mission. This report addresses the engineering feasibility for two pressure pulse technologies, which are similar in concept, for pipeline unplugging.

  6. 3T MRI investigation of cardiac left ventricular structure and function in a UK population: The tayside screening for the prevention of cardiac events (TASCFORCE) study

    PubMed Central

    Gandy, Stephen J.; Lambert, Matthew; Belch, Jill; Cavin, Ian; Crowe, Elena; Littleford, Roberta; MacFarlane, Jennifer A.; Matthew, Shona Z.; Martin, Patricia; Nicholas, R. Stephen; Struthers, Allan; Sullivan, Frank; Waugh, Shelley A.; White, Richard D.; Weir‐McCall, Jonathan R.

    2016-01-01

    Purpose To scan a volunteer population using 3.0T magnetic resonance imaging (MRI). MRI of the left ventricular (LV) structure and function in healthy volunteers has been reported extensively at 1.5T. Materials and Methods A population of 1528 volunteers was scanned. A standardized approach was taken to acquire steady‐state free precession (SSFP) LV data in the short‐axis plane, and images were quantified using commercial software. Six observers undertook the segmentation analysis. Results Mean values (±standard deviation, SD) were: ejection fraction (EF) = 69 ± 6%, end diastolic volume index (EDVI) = 71 ± 13 ml/m2, end systolic volume index (ESVI) = 22 ± 7 ml/m2, stroke volume index (SVI) = 49 ± 8 ml/m2, and LV mass index (LVMI) = 55 ± 12 g/m2. The mean EF was slightly larger for females (69%) than for males (68%), but all other variables were smaller for females (EDVI 68v77 ml/m2, ESVI 21v25 ml/m2, SVI 46v52 ml/m2, LVMI 49v64 g/m2, all P < 0.05). The mean LV volume data mostly decreased with each age decade (EDVI males: –2.9 ± 1.3 ml/m2, females: –3.1 ± 0.8 ml/m2; ESVI males: –1.3 ± 0.7 ml/m2, females: –1.7 ± 0.5 ml/m2; SVI males: –1.7 ± 0.9 ml/m2, females: –1.4 ± 0.6 ml/m2; LVMI males: –1.6 ± 1.1 g/m2, females: –0.2 ± 0.6 g/m2) but the mean EF was virtually stable in males (0.6 ± 0.6%) and rose slightly in females (1.2 ± 0.5%) with age. Conclusion LV reference ranges are provided in this population‐based MR study at 3.0T. The variables are similar to those described at 1.5T, including variations with age and gender. These data may help to support future population‐based MR research studies that involve the use of 3.0T MRI scanners. J. Magn. Reson. Imaging 2016;44:1186–1196. PMID:27143317

  7. A feasibility study for an International Year of Landcare

    NASA Astrophysics Data System (ADS)

    Mutota, E.; Arnalds, A.

    2009-04-01

    Human-induced activities place enormous pressures on the land worldwide, creating competition and conflict, and suboptimal use of the land. Climate change, loss of biodiversity and land degradation leads to decreasing productivity, food and water shortages, and reduced economic benefits, among others. In order to address these challenges and achieve sustainability goals, the need to change the way global resources are being utilized is crucial. A holistic and integrated community-based approach such as Landcare could be a viable approach to meet this worldwide challenge. Landcare is about committed people working together on land rehabilitation and restoration projects at the local level, transforming attitudes and stimulating new ideas among land users, generating support and building partnerships between and among local communities, governments and the private sector. Landcare initiatives have grown in a number of countries where success stories of actions on the ground clearly show the wider application of the Landcare approach in resolving many of the world's environmental problems and livelihood challenges. However, the potential of Landcare have not yet been widely exploited on a scale that really matters—as local actions build up towards global progress, there is more scope for unified efforts towards a global Landcare movement. Following the recommendation given at the International Forum on Soils, Society and Global Change in 2007 in Iceland (http://www.iisd.ca/YMB/SDFSS/), an International Year of Landcare should be established. Such a year would bring into focus efforts to build local capacity and share knowledge and experiences between provinces, countries and continents on Landcare. Additionally, holding a year concerned with Landcare would greatly contribute to the attainment of the Millennium Development Goals, the UN environmental conventions and many other sustainability goals. Our study supports the notion that Landcare offers a robust platform

  8. A proof-of-principle study of multi-site real-time functional imaging at 3T and 7T: Implementation and validation.

    PubMed

    Baecke, Sebastian; Lützkendorf, Ralf; Mallow, Johannes; Luchtmann, Michael; Tempelmann, Claus; Stadler, Jörg; Bernarding, Johannes

    2015-02-12

    Real-time functional Magnetic Resonance Imaging (rtfMRI) is used mainly for neurofeedback or for brain-computer interfaces (BCI). But multi-site rtfMRI could in fact help in the application of new interactive paradigms such as the monitoring of mutual information flow or the controlling of objects in shared virtual environments. For that reason, a previously developed framework that provided an integrated control and data analysis of rtfMRI experiments was extended to enable multi-site rtfMRI. Important new components included a data exchange platform for analyzing the data of both MR scanners independently and/or jointly. Information related to brain activation can be displayed separately or in a shared view. However, a signal calibration procedure had to be developed and integrated in order to permit the connecting of sites that had different hardware and to account for different inter-individual brain activation levels. The framework was successfully validated in a proof-of-principle study with twelve volunteers. Thus the overall concept, the calibration of grossly differing signals, and BCI functionality on each site proved to work as required. To model interactions between brains in real-time, more complex rules utilizing mutual activation patterns could easily be implemented to allow for new kinds of social fMRI experiments.

  9. Geosynchronous Microwave Atmospheric Sounding Radiometer (MASR) antenna feasibility study. Volume 3: Antenna feasibility

    NASA Technical Reports Server (NTRS)

    Villeneuve, A. T.

    1978-01-01

    Antenna systems capable of operating with a multichannel microwave radiometer intended for mapping severe storm activity over patches on the surface of the earth 750 km square were compared. These systems included a paraboloidal reflector with an offset focal point feed, and a symmetrical Cassegrain reflector system. Both systems are acceptable from the point of view of beam efficiency, however, from the point of view of maintaining the required positional accuracies and surface tolerances, as well as from the point of view of manufacturability, cost effectiveness, and technical risk, the symmetrical Casegrain was selected as the preferred configuration. Performance characteristics were calculated and a mechanical design study was conducted to provide estimates of the technical risk, costs, and development time required for the construction of such an antenna system.

  10. Global fractional anisotropy and mean diffusivity together with segmented brain volumes assemble a predictive discriminant model for young and elderly healthy brains: a pilot study at 3T

    PubMed Central

    Garcia-Lazaro, Haydee Guadalupe; Becerra-Laparra, Ivonne; Cortez-Conradis, David; Roldan-Valadez, Ernesto

    2016-01-01

    Summary Several parameters of brain integrity can be derived from diffusion tensor imaging. These include fractional anisotropy (FA) and mean diffusivity (MD). Combination of these variables using multivariate analysis might result in a predictive model able to detect the structural changes of human brain aging. Our aim was to discriminate between young and older healthy brains by combining structural and volumetric variables from brain MRI: FA, MD, and white matter (WM), gray matter (GM) and cerebrospinal fluid (CSF) volumes. This was a cross-sectional study in 21 young (mean age, 25.71±3.04 years; range, 21–34 years) and 10 elderly (mean age, 70.20±4.02 years; range, 66–80 years) healthy volunteers. Multivariate discriminant analysis, with age as the dependent variable and WM, GM and CSF volumes, global FA and MD, and gender as the independent variables, was used to assemble a predictive model. The resulting model was able to differentiate between young and older brains: Wilks’ λ = 0.235, χ2 (6) = 37.603, p = .000001. Only global FA, WM volume and CSF volume significantly discriminated between groups. The total accuracy was 93.5%; the sensitivity, specificity and positive and negative predictive values were 91.30%, 100%, 100% and 80%, respectively. Global FA, WM volume and CSF volume are parameters that, when combined, reliably discriminate between young and older brains. A decrease in FA is the strongest predictor of membership of the older brain group, followed by an increase in WM and CSF volumes. Brain assessment using a predictive model might allow the follow-up of selected cases that deviate from normal aging. PMID:27027893

  11. Quantitative study of liver magnetic resonance spectroscopy quality at 3T using body and phased array coils with physical analysis and clinical evaluation.

    PubMed

    Xu, Li; Gu, Shiyong; Feng, Qianjin; Liang, Changhong; Xin, Sherman Xuegang

    2015-01-01

    This study aims to investigate the quality difference of short echo time (TE) breathhold 1H magnetic resonance spectroscopy (MRS) of the liver at 3.0T using the body and phased array coils, respectively. In total, 20 pairs of single-voxel proton spectra of the liver were acquired at 3.0T using the phased array and body coils as receivers. Consecutive stacks of breathhold spectra were acquired using the point resolved spectroscopy (PRESS) technique at a short TE of 30 ms and a repetition time (TR) of 1500 ms. The first spectroscopy sequence was "copied" for the second acquisition to ensure identical voxel positioning. The MRS prescan adjustments of shimming and water suppression, signal-to noise ratio (SNR), and major liver quantitative information were compared between paired spectra. Theoretical calculation of the SNR and homogeneity of the region of interest (ROI, 2 cm×2 cm×2 cm) using different coils loaded with 3D liver electromagnetic model of real human body was implemented in the theoretical analysis. The theoretical analysis showed that, inside the ROI, the SNR of the phase array coil was 2.8387 times larger than that of body coil and the homogeneity of the phase array coil and body coil was 80.10% and 93.86%, respectively. The experimental results showed excellent correlations between the paired data (all r > 0.86). Compared with the body coil group, the phased array group had slightly worse shimming effect and better SNR (all P values < .01). The discrepancy of the line width because of the different coils was approximately 0.8 Hz (0.00625 ppm). No significant differences of the major liver quantitative information of Cho/Lip2 height, Cho/Lip2 area, and lipid content were observed (all P values >0.05). The theoretical analysis and clinical experiment showed that the phased array coil was superior to the body coil with respect to 3.0T breathhold hepatic proton MRS.

  12. 41 CFR 101-5.104-6 - Conduct of feasibility studies.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... studies. 101-5.104-6 Section 101-5.104-6 Public Contracts and Property Management Federal Property... FEDERAL BUILDINGS AND COMPLEXES 5.1-General § 101-5.104-6 Conduct of feasibility studies. An initial... and detailed procedures to be followed in the conduct of each feasibility study. Arrangements will...

  13. 41 CFR 101-5.104-6 - Conduct of feasibility studies.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... studies. 101-5.104-6 Section 101-5.104-6 Public Contracts and Property Management Federal Property... FEDERAL BUILDINGS AND COMPLEXES 5.1-General § 101-5.104-6 Conduct of feasibility studies. An initial... and detailed procedures to be followed in the conduct of each feasibility study. Arrangements will...

  14. 41 CFR 101-5.104-6 - Conduct of feasibility studies.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... studies. 101-5.104-6 Section 101-5.104-6 Public Contracts and Property Management Federal Property... FEDERAL BUILDINGS AND COMPLEXES 5.1-General § 101-5.104-6 Conduct of feasibility studies. An initial... and detailed procedures to be followed in the conduct of each feasibility study. Arrangements will...

  15. 41 CFR 101-5.104-6 - Conduct of feasibility studies.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... studies. 101-5.104-6 Section 101-5.104-6 Public Contracts and Property Management Federal Property... FEDERAL BUILDINGS AND COMPLEXES 5.1-General § 101-5.104-6 Conduct of feasibility studies. An initial... and detailed procedures to be followed in the conduct of each feasibility study. Arrangements will...

  16. Assessment of the predictive capacity of the 3T3 Neutral Red Uptake cytotoxicity test method to identify substances not classified for acute oral toxicity (LD50>2000 mg/kg): results of an ECVAM validation study.

    PubMed

    Prieto, Pilar; Cole, Thomas; Curren, Rodger; Gibson, Rosemary M; Liebsch, Manfred; Raabe, Hans; Tuomainen, Anita M; Whelan, Maurice; Kinsner-Ovaskainen, Agnieszka

    2013-04-01

    Assessing chemicals for acute oral toxicity is a standard information requirement of regulatory testing. However, animal testing is now prohibited in the cosmetics sector in Europe, and strongly discouraged for industrial chemicals. Building on the results of a previous international validation study, a follow up study was organised to assess if the 3T3 Neutral Red Uptake cytotoxicity assay could identify substances not requiring classification as acute oral toxicants under the EU regulations. Fifty-six coded industrial chemicals were tested in three laboratories, each using one of the following protocols: the previously validated protocol, an abbreviated version of the protocol and the protocol adapted for an automation platform. Predictions were very similar among the three laboratories. The assay exhibited high sensitivity (92-96%) but relatively low specificity (40-44%). Three chemicals were under predicted. Assuming that most industrial chemicals are not likely to be acutely toxic, this test method could prove a valuable component of an integrated testing strategy, a read-across argument, or weight-of-evidence approach to identify non toxic chemicals (LD50>2000 mg/kg). However, it is likely to under predict chemicals acting via specific mechanisms of action not captured by the 3T3 test system, or which first require biotransformation in vivo.

  17. 43 CFR 404.48 - What process will Reclamation follow to determine if a feasibility study is ready for review?

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... determine if a feasibility study is ready for review? 404.48 Section 404.48 Public Lands: Interior... SUPPLY PROGRAM Feasibility Studies § 404.48 What process will Reclamation follow to determine if a feasibility study is ready for review? (a) Reclamation will evaluate whether the feasibility study...

  18. Formal feasibility studies in palliative care: why they are important and how to conduct them.

    PubMed

    Hagen, Neil A; Biondo, Patricia D; Brasher, Penny M A; Stiles, Carla R

    2011-08-01

    The concept of clinical trial feasibility is of great interest to the community of palliative care researchers, clinicians, and granting agencies. Significant allocation of resources is required in the form of funding, time, intellect, and motivation to carry out clinical research, and understandably, clinical investigators, institutions, and granting agencies are disappointed when funded trials are unsuccessfully conducted. We argue that for many trials conducted in palliative care, the feasibility of conducting the proposed trial should be formally explored before implementation. There is substantial information available within the literature on the topic of study feasibility but no singular guide on how one can pragmatically apply this advice in the palliative care setting. We suggest that a Formal Feasibility Study for palliative care trials should be commonly conducted before development of a larger pivotal trial, to prospectively identify barriers to research, develop strategies to address these barriers, and predict whether the larger study is feasible. If a Formal Feasibility Study is not required, elements of feasibility can be specifically tested before launching clinical trials. The purpose of this article is to offer a draft framework for the design and conduct of a Formal Feasibility Study that, if implemented, could concretely support successful completion of high-quality research in a timely fashion. Additionally, we hope to foster dialogue within the palliative care research community regarding the relevance of establishing feasibility before initiation of definitive trials in the palliative care population.

  19. Feasibility study of sedimentary enhanced geothermal systems using reservoir simulation

    NASA Astrophysics Data System (ADS)

    Cho, Jae Kyoung

    The objective of this research is to evaluate the preliminary feasibility of commercial geothermal projects, from a sedimentary reservoir with low permeability that requires productivity enhancement, using numerical reservoir simulation. The performance of a sedimentary geothermal reservoir is investigated in terms of reservoir hydraulics and thermal evolution. To build a reliable benchmark for simulation study, validation of the numerical reservoir model with respect to an analytical model is presented, and the process to achieve an acceptable match between the numerical and analytical solutions is described. The analytical model used in this study is based on the work of Gringarten (1978), which consists of a conceptual geothermal reservoir, considering an injection and production well doublet in a homogeneous porous media. A commercial thermal reservoir simulator (STARS from Computer Modeling Group, CMG) is used in this work for numerical modeling. In order to reproduce the analytical model results, the numerical simulation model is modified to include the same assumptions of the analytical model. Simulation model parameters that make the numerical results deviate from the analytical solution, such as the grid block size, time step and no-flow boundary are identified and investigated. An analytical tracer test model proposed by Shook (2000) is numerically modeled. This model allows us to predict the time when the temperature of the produced water decreases by capturing a tracer component at production well. Reservoir simulation models with different porosity and permeability distribution are tested to see the effects of reservoir inhomogeneity and anisotropy. In particular, premature thermal breakthrough due to the presence of high permeability streak in a reservoir model is simulated. In an effort to apply the knowledge we obtained from the analytical solutions, the effects of reservoir rock and water properties, as a function of pressure and temperature, are

  20. Synthesis, characterisation, conformational preferences, dynamic NMR studies and antimicrobial evaluation of N-nitroso- and N-formyl-c-3,t-3-dimethyl-r-2,c-7-diphenyl-1,4-diazepan-5-ones

    NASA Astrophysics Data System (ADS)

    Ponnuswamy, S.; Akila, A.; Kiruthiga devi, D.; Maheshwaran, V.; Ponnuswamy, M. N.

    2016-04-01

    The stereochemical preferences of N-nitroso- and N-formyl-c-3,t-3-dimethyl-r-2,c-7-diphenyl-1,4-diazepan-5-ones 3 & 4, respectively, have been determined using 1D and 2D NMR spectral techniques. Interestingly, the N-nitroso compound 3 is found to prefer an equilibrium between alternate chair conformations with diaxial phenyl groups, while the N-formyl compound 4 prefers flattened boat conformation. This is stereochemically a novel report on the flexible rings adopting a chair conformation with diaxial phenyl groups. The X-ray crystal structure of N-nitroso-c-3,t-3-dimethyl-r-2,c-7-diphenyl-1,4-diazepan-5-one (3) also supports the chair conformation with diaxial phenyl groups. Dynamic 1H NMR spectral studies have been carried out on the N-nitroso and N-formyl diazepan-5-ones 3 &4 and the energy barriers for N-NO and N-CO rotations are found to be 88.7 and 75.7 kJ/mol, respectively. The antimicrobial activities have been determined for the compounds 2-4 and it is found that all the compounds exhibit significant antibacterial and antifungal activities when compared to the standard chloramphenicol.

  1. Defining Feasibility and Pilot Studies in Preparation for Randomised Controlled Trials: Development of a Conceptual Framework.

    PubMed

    Eldridge, Sandra M; Lancaster, Gillian A; Campbell, Michael J; Thabane, Lehana; Hopewell, Sally; Coleman, Claire L; Bond, Christine M

    2016-01-01

    We describe a framework for defining pilot and feasibility studies focusing on studies conducted in preparation for a randomised controlled trial. To develop the framework, we undertook a Delphi survey; ran an open meeting at a trial methodology conference; conducted a review of definitions outside the health research context; consulted experts at an international consensus meeting; and reviewed 27 empirical pilot or feasibility studies. We initially adopted mutually exclusive definitions of pilot and feasibility studies. However, some Delphi survey respondents and the majority of open meeting attendees disagreed with the idea of mutually exclusive definitions. Their viewpoint was supported by definitions outside the health research context, the use of the terms 'pilot' and 'feasibility' in the literature, and participants at the international consensus meeting. In our framework, pilot studies are a subset of feasibility studies, rather than the two being mutually exclusive. A feasibility study asks whether something can be done, should we proceed with it, and if so, how. A pilot study asks the same questions but also has a specific design feature: in a pilot study a future study, or part of a future study, is conducted on a smaller scale. We suggest that to facilitate their identification, these studies should be clearly identified using the terms 'feasibility' or 'pilot' as appropriate. This should include feasibility studies that are largely qualitative; we found these difficult to identify in electronic searches because researchers rarely used the term 'feasibility' in the title or abstract of such studies. Investigators should also report appropriate objectives and methods related to feasibility; and give clear confirmation that their study is in preparation for a future randomised controlled trial designed to assess the effect of an intervention.

  2. Failure Modes and Effects Analysis (FMEA) Assistant Tool Feasibility Study

    NASA Technical Reports Server (NTRS)

    Flores, Melissa; Malin, Jane T.

    2013-01-01

    An effort to determine the feasibility of a software tool to assist in Failure Modes and Effects Analysis (FMEA) has been completed. This new and unique approach to FMEA uses model based systems engineering concepts to recommend failure modes, causes, and effects to the user after they have made several selections from pick lists about a component s functions and inputs/outputs. Recommendations are made based on a library using common failure modes identified over the course of several major human spaceflight programs. However, the tool could be adapted for use in a wide range of applications from NASA to the energy industry.

  3. Feasibility study: Monodisperse polymer particles containing laser-excitable dyes

    NASA Technical Reports Server (NTRS)

    Vanderhoff, John W.; Chen, Jing-Hong

    1993-01-01

    The objective was to determine the feasibility of the preparation of monodisperse spherical poly(methyl methacrylate) and polystyrene particles that contain laser-excitable dyes in the size range 0.1 microns to 1 cm. Poly(methyl methacrylate) and polystyrene were chosen because of their excellent optical properties. The sphericity was required for uniformity of spectral output of re-irradiated light from the dye-containing particles. The monodispersity was required to give each particle the same optical properties when exposed to laser light.

  4. Feasibility study of inlet shock stability system of YF-12

    NASA Technical Reports Server (NTRS)

    Blausey, G. C.; Coleman, D. M.; Harp, D. S.

    1972-01-01

    The feasibility of self actuating bleed valves as a shock stabilization system in the inlet of the YF-12 is considered for vortex valves, slide valves, and poppet valves. Analytical estimation of valve performance indicates that only the slide and poppet valves located in the inlet cowl can meet the desired steady state stabilizing flows, and of the two the poppet valve is substantially faster in response to dynamic disturbances. The poppet valve is, therefore, selected as the best shock stability system for the YF-12 inlet.

  5. Volumetric Hall effect tomography--a feasibility study.

    PubMed

    Wen, H

    1999-07-01

    Hall effect imaging is an ultrasound-based method of mapping spatial variations in the dielectric constants of an acoustically-uniform sample. This paper presents three-dimensional Hall effect images of phantoms obtained by scanning a single transducer across a two-dimensional grid, effectively simulating two-dimensional phased-array signal reception. The experiments demonstrate the feasibility of volumetric Hall effect tomography and show the advantage of volumetric scans over planar scans. The images reflect several limitations of the current scanning method and point to directions for further hardware development. The inherent limitations of Hall effect imaging are also discussed in light of these results.

  6. Failure Modes and Effects Analysis (FMEA) Assistant Tool Feasibility Study

    NASA Astrophysics Data System (ADS)

    Flores, Melissa D.; Malin, Jane T.; Fleming, Land D.

    2013-09-01

    An effort to determine the feasibility of a software tool to assist in Failure Modes and Effects Analysis (FMEA) has been completed. This new and unique approach to FMEA uses model based systems engineering concepts to recommend failure modes, causes, and effects to the user after they have made several selections from pick lists about a component's functions and inputs/outputs. Recommendations are made based on a library using common failure modes identified over the course of several major human spaceflight programs. However, the tool could be adapted for use in a wide range of applications from NASA to the energy industry.

  7. Volumetric Hall Effect Tomography – A Feasibility Study

    PubMed Central

    Wen, Han

    2010-01-01

    Hall effect imaging is an ultrasound-based method of mapping spatial variations in the dielectric constants of an acoustically-uniform sample. This paper presents three-dimensional Hall effect images of phantoms obtained by scanning a single transducer across a two-dimensional grid, effectively simulating two-dimensional phased-array signal reception. The experiments demonstrate the feasibility of volumetric Hall effect tomography and show the advantage of volumetric scans over planar scans. The images reflect several limitations of the current scanning method and point to directions for further hardware development. The inherent limitations of Hall effect imaging are also discussed in light of these results. PMID:10604800

  8. Feasiblity study for a 34 GHz (Ka band) gyroamplifier

    NASA Technical Reports Server (NTRS)

    Stone, D. S.; Bier, R. E.; Caplan, M.; Huey, H. E.; Pirkle, D. R.; Robinson, J. D.; Thompson, L.

    1984-01-01

    The feasibility of using a gyroklystron power tube as the final amplifier in a 400 kW CW 34 GHz transmitter on the Goldstone Antenna is investigated. A conceptual design of the gyroklystron and the transmission line connecting it with the antenna feed horn is presented. The performance characteristics of the tube and transmission line are compared to the transmitter requirements for a deep space radar system. Areas of technical risk for a follow-on hardware development program for the gyroklystron amplifier and overmoded transmission line components are discussed.

  9. Space shuttle program information control and retrieval system feasibility study report

    NASA Technical Reports Server (NTRS)

    Lingle, C. P.

    1973-01-01

    The feasibility of having a common information management network for space shuttle data, is studied. Identified are the information types required, sources and users of the information, and existing techniques for acquiring, storing and retrieving the data. The study concluded that a decentralized system is feasible, and described a recommended development plan for it.

  10. 77 FR 42489 - Notice of Availability of the Draft Feasibility Study; Environmental Impact Statement for the...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-19

    ... Department of the Army; Corps of Engineers Notice of Availability of the Draft Feasibility Study... has prepared a Draft Feasibility Report/Environmental Impact Statement (FR/EIS) for the Chatfield Reservoir Storage Reallocation Study, Littleton, Colorado and by this notice is announcing the extension...

  11. 41 CFR 101-5.104-6 - Conduct of feasibility studies.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... FEDERAL BUILDINGS AND COMPLEXES 5.1-General § 101-5.104-6 Conduct of feasibility studies. An initial... and detailed procedures to be followed in the conduct of each feasibility study. Arrangements will be... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Conduct of...

  12. 7 CFR 4280.176 - Feasibility study grant applications-content.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... Energy for America Program General Renewable Energy System Feasibility Study Grants § 4280.176... renewable energy system. (10) If the applicant is a rural small business, certification that the feasibility study grant will be for a renewable energy system project that is located in a rural area. (11)...

  13. 7 CFR 4280.176 - Feasibility study grant applications-content.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... Energy for America Program General Renewable Energy System Feasibility Study Grants § 4280.176... renewable energy system. (10) If the applicant is a rural small business, certification that the feasibility study grant will be for a renewable energy system project that is located in a rural area. (11)...

  14. Feasibility study of real-time planning for stereotactic radiosurgery

    SciTech Connect

    Zhang Qinghui; Song Yulin; Chan, Maria; Burman, Chandra; Yamada, Yoshiya

    2013-03-15

    Purpose: 3D rotational setup errors in radiotherapy are often ignored by most clinics due to inability to correct or simulate them accurately and efficiently. There are two types of rotation-related problems in a clinical setting. One is to assess the affected dose distribution in real-time if correction is not applied and the other one is to correct the rotational setup errors prior to the initiation of the treatment. Here, the authors present the analytical solutions to both problems. Methods: (1) To assess the real-time dose distribution, eight stereotactic radiosurgery (SRS) cases were used as examples. For each plan, two new sets of beams with different table, gantry, and collimator angles were given in analytical forms as a function of patient rotational errors. The new beams simulate the rotational effects of the patient during the treatment setup. By using one arbitrary set of beams, SRS plans were recomputed with a series of different combinations of patient rotational errors, ranging from (-5 Degree-Sign , -5 Degree-Sign , -5 Degree-Sign ) to (5 Degree-Sign , 5 Degree-Sign , 5 Degree-Sign ) (roll, pitch, and yaw) with an increment of 1 Degree-Sign and compared with those without rotational errors. For each set of rotational errors, its corresponding equivalent beams were computed using the analytical solutions and then used for dose calculation. (2) To correct for the rotational errors, two new sets of table, gantry, and collimator angles were derived analytically to validate the previously published derivation. However, in the derivation, a novel methodology was developed and two sets of table, gantry, and collimator angles were obtained in analytical forms. The solutions provide an alternative approach to rotational error correction by rotating the couch, gantry, and collimator rather than the patient. Results: For demonstration purpose, the above-derived new beams were implemented in a treatment planning system (TPS) to study the rotational effects on

  15. Feasibility study of the Kafue Gorge Lower Hydroelectric Project. Feasibility report. Volume 1 of 4. Main report. Export trade information

    SciTech Connect

    1995-05-01

    This study, conducted by Harza Engineering Company, was funded by the U.S. Trade and Development Agency. The primary objective of the feasibility study was to perform the technical, environmental, economic and financial studies to determine whether or not to proceed with the project. The report covers the preinvestment study that was conducted in 1976 to make comparisons from that period, as well as present and future electrical power demands in order to determine the kinds of equipment and structure needed if the project proceeds. This is Volume I of IV containing the Main Report. It is divided into the following sections: (1) Introduction; (2) Project Setting; (3) Project Description; (4) Construction Schedule and Cost Estimate; (5) Economic and Financial Evaluation; (6) Environmental Assessment.

  16. Feasibility of cold snare polypectomy in Japan: A pilot study

    PubMed Central

    Takeuchi, Yoji; Yamashina, Takeshi; Matsuura, Noriko; Ito, Takashi; Fujii, Mototsugu; Nagai, Kengo; Matsui, Fumi; Akasaka, Tomofumi; Hanaoka, Noboru; Higashino, Koji; Iishi, Hiroyasu; Ishihara, Ryu; Thorlacius, Henrik; Uedo, Noriya

    2015-01-01

    AIM: To investigate the feasibility of cold snare polypectomy (CSP) in Japan. METHODS: The outcomes of 234 non-pedunculated polyps smaller than 10 mm in 61 patients who underwent CSP in a Japanese referral center were retrospectively analyzed. The cold snare polypectomies were performed by nine endoscopists with no prior experience in CSP using an electrosurgical snare without electrocautery. RESULTS: CSPs were completed for 232 of the 234 polyps. Two (0.9%) polyps could not be removed without electrocautery. Immediate postpolypectomy bleeding requiring endoscopic hemostasis occurred in eight lesions (3.4%; 95%CI: 1.1%-5.8%), but all were easily managed. The incidence of immediate bleeding after CSP for small polyps (6-9 mm) was significantly higher than that of diminutive polyps (≤ 5 mm; 15% vs 1%, respectively). Three (5%) patients complained of minor bleeding after the procedure but required no intervention. The incidence of delayed bleeding requiring endoscopic intervention was 0.0% (95%CI: 0.0%-1.7%). In total, 12% of the resected lesions could not be retrieved for pathological examination. Tumor involvement in the lateral margin could not be histologically assessed in 70 (40%) lesions. CONCLUSION: CSP is feasible in Japan. However, immediate bleeding, retrieval failure and uncertain assessment of the lateral tumor margin should not be underestimated. Careful endoscopic diagnosis before and evaluation of the tumor residue after CSP are recommended when implementing CSP in Japan. PMID:26634041

  17. Comparison of Muscle BOLD Responses to Arterial Occlusion at 3T and 7T

    PubMed Central

    Towse, Theodore F.; Childs, Benjamin T.; Sabin, Shea A.; Bush, Emily C.; Elder, Christopher P.; Damon, Bruce M.

    2014-01-01

    Purpose The purpose of this study was to determine the feasibility of muscle BOLD (mBOLD) imaging at 7T by comparing the changes in R2* of muscle at 3 and 7T in response to a brief period of tourniquet-induced ischemia. Methods Eight subjects (3 male), aged 29.5 ± 6.1 years (mean ± standard deviation, SD), 167.0 ± 10.6 cm tall with a body mass of 62.0 ± 18.0 kg, participated in the study. Subjects reported to the lab on four separate occasions including a habituation session, two MRI scans, and in a subset of subjects, a session during which changes in blood flow and blood oxygenation were quantified using Doppler ultrasound (U/S) and near-infrared spectroscopy (NIRS) respectively. For statistical comparisons between 3T and 7T, R2* rate constants were calculated as R2* = 1/T2*. Results The mean pre-occlusion R2* value was greater at 7T than at 3T (60.16 ± 2.95 vs 35.17 ± 0.35 s−1 respectively, p <0.001). Also, the mean ΔR2*END and ΔR2*POST values were greater for 7T than for 3T (−2.36 ± 0.25 vs. −1.24 ± 0.39 s−1, respectively, Table 1). Conclusion Muscle BOLD contrast at 7T is as much as six-fold greater than at 3T. In addition to providing greater SNR and CNR, 7T mBOLD studies may offer further advantages in the form of greater sensitivity to pathological changes in the muscle microcirculation. PMID:25884888

  18. Wisconsin Elementary Teacher Education Project. Volume VI, Feasibility Study: Pricing and Economic Analysis Study. Final Report.

    ERIC Educational Resources Information Center

    Wisconsin Univ., Madison.

    This document is the second volume of the feasibility study report for the Wisconsin Elementary Teacher Education Project. It provides in part 1 data on program, planning and budgeting, including cost figures for preparing students in the present and new programs, marginal expenses, and costs for implementing the program on other campuses. Part 2…

  19. Australian Newspaper Index Feasibility Study. Development of Resource Sharing Networks. Networks Study No. 13.

    ERIC Educational Resources Information Center

    Stafford, Robert

    This study of the need for and feasibility of creating an Australian newspaper index comprises a brief historical background; an outline of the current position regarding access to newspapers, including the international scene; an assessment of the need for an Australian newspaper index; recommendations on the breadth and depth of subject coverage…

  20. Feasibility study for future implantable neural-silicon interface devices.

    PubMed

    Al-Armaghany, Allann; Yu, Bo; Mak, Terrence; Tong, Kin-Fai; Sun, Yihe

    2011-01-01

    The emerging neural-silicon interface devices bridge nerve systems with artificial systems and play a key role in neuro-prostheses and neuro-rehabilitation applications. Integrating neural signal collection, processing and transmission on a single device will make clinical applications more practical and feasible. This paper focuses on the wireless antenna part and real-time neural signal analysis part of implantable brain-machine interface (BMI) devices. We propose to use millimeter-wave for wireless connections between different areas of a brain. Various antenna, including microstrip patch, monopole antenna and substrate integrated waveguide antenna are considered for the intra-cortical proximity communication. A Hebbian eigenfilter based method is proposed for multi-channel neuronal spike sorting. Folding and parallel design techniques are employed to explore various structures and make a trade-off between area and power consumption. Field programmable logic arrays (FPGAs) are used to evaluate various structures.

  1. Training Corrective Maintenance Performance on Electronic Equipment with CAI Terminals: I. A Feasibility Study.

    ERIC Educational Resources Information Center

    Rigney, Joseph W.

    A report is given of a feasibility study in which several possible relationships between student, computer terminal, and electronic equipment were considered. The simplest of these configurations was set up and examined in terms of its feasibility for teaching the performance of fault localization on a Navy transceiver. An instructional program…

  2. Aquifer thermal energy storage - a feasibility study for large scale demonstration

    SciTech Connect

    Skinner, W.V.; Supkow, D.J.

    1981-01-01

    An aquifer thermal energy storage (ATES) feasibility study was conducted to evaluate the feasibility of using a portion of the Magothy Aquifer underlying the Stony Brook University Campus on Long Island, New York, for storing water that is chilled during the winter and then recovering this water during the following summer months for air conditioning purposes.

  3. Establishing Ongoing, Early Identification Programs for Mental Health Problems in Our Schools: A Feasibility Study

    ERIC Educational Resources Information Center

    Nemeroff, Robin; Levitt, Jessica Mass; Faul, Lisa; Wonpat-Borja, Ahtoy; Bufferd, Sara; Setterberg, Stephen; Jensen, Peter S.

    2008-01-01

    The study evaluates the feasibility and effectiveness of several mental health screening and assessment tools in schools. A computerized version of the Diagnostic Interview Schedule for Children-IV proved to be feasible bridging the gap between mental health providers and unmet need of children accompanying risks.

  4. Comprehensive Renewable Energy Feasibility Study for the Makah Indian Tribe

    SciTech Connect

    RobertLynette; John Wade; Larry Coupe

    2005-03-31

    The purpose of this project was to determine the technical feasibility, economic viability, and potential impacts of installing and operating a wind power station and/or small hydroelectric generation plants on the Makah reservation. The long-term objective is to supply all or a portion of Tribe's electricity from local, renewable energy sources in order to reduce costs, provide local employment, and reduce power outages. An additional objective was for the Tribe to gain an understanding of the requirements, costs, and benefits of developing and operating such plants on the reservation. The Makah Indian Reservation, with a total land area of forty-seven square miles, is located on the northwestern tip of the Olympic Peninsula in Washington State. Four major watersheds drain the main Reservation areas and the average rainfall is over one hundred inches per year. The reservation's west side borders the Pacific Ocean, but mostly consists of rugged mountainous terrain between 500 and 1,900 feet in elevation. Approximately 1,200 tribal members live on the Reservation and there is an additional non-Indian residential population of about 300. Electric power is provided by the Clallam County PUD. The annual usage on the reservation is approximately 16,700 mWh. Project Work Wind Energy--Two anemometer suites of equipment were installed on the reservation and operated for a more than a year. An off-site reference station was identified and used to project long-term wind resource characteristics at the two stations. Transmission resources were identified and analyzed. A preliminary financial analysis of a hypothetical wind power station was prepared and used to gauge the economic viability of installation of a multi-megawatt wind power station. Small Hydroelectric--Two potential sites for micro/small-hydro were identified by analysis of previous water resource studies, topographical maps, and conversations with knowledgeable Makah personnel. Field trips were conducted to

  5. Spaceflight Operations Services Grid (SOSG) Prototype Implementation and Feasibility Study

    NASA Technical Reports Server (NTRS)

    Bradford, Robert N.; Thigpen, William W.; Lisotta, Anthony J.; Redman, Sandra

    2004-01-01

    , video, telemetry and commanding systems. Once the User-based services are in place, they will be analyzed to establish feasibility for Grid enabling. If feasible then each User-based service will be Grid enabled. The remaining non-Grid services if not already Web enabled will be so enabled. In the end, four portals will be developed one for each VO. Each portal will contain the appropriate User-based services required for that VO to operate.

  6. Privatization and the allure of franchising: a Zambian feasibility study.

    PubMed

    Fiedler, John L; Wight, Jonathan B

    2003-01-01

    Efforts to privatize portions of the health sector have proven more difficult to implement than had been anticipated previously. One common bottleneck encountered has been the traditional organizational structure of the private sector, with its plethora of independent, single physician practices. The atomistic nature of the sector has rendered many privatization efforts difficult, slow and costly-in terms of both organizational development and administration. In many parts of Africa, in particular, the shortages of human and social capital, and the fragile nature of legal institutions, undermine the appeal of privatization. The private sector is left with inefficiencies, high prices and costs, and a reduced effective demand. The result is the simultaneous existence of excess capacity and unmet need. One potential method to improve the efficiency of the private sector, and thereby enhance the likelihood of successful privatization, is to transfer managerial technology--via franchising--from models that have proven successful elsewhere. This paper presents a feasibility analysis of franchizing the successful Bolivian PROSALUD system's management package to Zambia. The assessment, based on PROSALUD's financial model, demonstrates that technology transfer requires careful adaptation to local conditions and, in this instance, would still require significant external assistance.

  7. Feasibility study of ECRH in NSTX-U startup plasma

    NASA Astrophysics Data System (ADS)

    Lopez, N. A.; Poli, F.; Taylor, G.; Harvey, R.; Petrov, Yu.

    2016-10-01

    A key mission goal of the National Spherical Torus eXperiment Upgrade (NSTX-U) is the demonstration of fully non-inductive startup and operation. In part to accomplish this, a 1MW, 28 GHz ECRH system is presently being developed for implementation on NSTX-U in 2018. Like most spherical tokamaks, NSTX-U operates in the overdense regime (fpe>fce) , which limits traditional ECRH to the early startup phase. An extensive modelling effort of the propagation and absorption of EC waves in the evolving plasma is thus required to define the most effective window of operation, and to optimize the launcher geometry for maximal heating and for current drive during this window. In fact, the ECRH system will play an important role in preparing a target plasma for subsequent injection of IC waves and NBI. Here we assess the feasibility of O1-mode ECRH in NSTX-U startup plasma at full field of 1T through time-dependent simulations performed with the transport solver TRANSP. Linear ray-tracing calculations conducted by GENRAY are coupled into the TRANSP framework, allowing the plasma equilibrium and the temperature profiles to evolve self-consistently in response to the injected microwave power. Furthermore, we investigate additional possibilities of heating and current drive made available through coupling the injected O-mode power to the electrostatic EBW via the slow X-mode as an intermediary.

  8. Nicotine fast dissolving films made of maltodextrins: a feasibility study.

    PubMed

    Cilurzo, Francesco; Cupone, Irma E; Minghetti, Paola; Buratti, Susanna; Selmin, Francesca; Gennari, Chiara G M; Montanari, Luisa

    2010-12-01

    This work aimed to develop a fast-dissolving film made of low dextrose equivalent maltodextrins (MDX) containing nicotine hydrogen tartrate salt (NHT). Particular attention was given to the selection of the suitable taste-masking agent (TMA) and the characterisation of the ductility and flexibility under different mechanical stresses. MDX with two different dextrose equivalents (DEs), namely DE 6 and DE 12, were selected in order to evaluate the effect of polymer molecular weight on film tensile properties. The bitterness and astringency intensity of NHT and the suppression effect of several TMA were evaluated by a Taste-Sensing System. The films were characterised in term of NHT content, tensile properties, disintegration time and drug dissolution test. As expected, placebo films made of MDX DE 6 appeared stiffer and less ductile than film prepared using MDX DE 12. The films disintegrated within 10 s. Among the tested TMA, the milk and mint flavours resulted particularly suitable to mask the taste of NHT. The addition of NHT and taste-masking agents affected film tensile properties; however, the effect of the addition of these components can be counterweighted by modulating the glycerine content and/or the MDX molecular weight. The feasibility of NHT loaded fast-dissolving films was demonstrated.

  9. Renewable Energy Development on Fort Mojave Reservation Feasiblity Study

    SciTech Connect

    Russell Gum, ERCC analytics LLC

    2008-03-17

    The Ft. Mojave tribe, whose reservation is located along the Colorado River in the states of Arizona, California, and Nevada near the point where all three states meet, has a need for increased energy supplies. This need is a direct result of the aggressive and successful economic development projects undertaken by the tribe in the last decade. While it is possible to contract for additional energy supplies from fossil fuel sources it was the desire of the tribal power company, AHA MACAV Power Service (AMPS) to investigate the feasibility and desirability of producing power from renewable sources as an alternative to increased purchase of fossil fuel generated power and as a possible enterprise to export green power. Renewable energy generated on the reservation would serve to reduce the energy dependence of the tribal enterprises on off reservation sources of energy and if produced in excess of reservation needs, add a new enterprise to the current mix of economic activities on the reservation. Renewable energy development would also demonstrate the tribe’s support for improving environmental quality, sustainability, and energy independence both on the reservation and for the larger community.

  10. Feasibility study of a simple unitized regenerative fuel cell

    NASA Astrophysics Data System (ADS)

    Verma, A.; Basu, S.

    Conventional fuel cells use hydrogen and oxygen as the fuel and oxidant, respectively. Hydrogen and oxygen can be produced through electrolysis of water in an electrochemical cell. A simple unitized regenerative fuel cell (URFC), by combining an electrolyzer and a fuel cell, is constructed to check the feasibility of such a device. In the first cycle, hydrogen and oxygen gases are generated from water containing NaHCO 3 when a given dc voltage is applied across Ni-Co/stainless steel electrodes. A solar photovoltaic cell is also used to provide the power. The generated gases are trapped between their respective electrodes and nylon mesh. In the second cycle, the hydrogen and oxygen gases are used in the same electrochemical cell (fuel cell) to produce electricity under a specific load. The current density and voltage are measured by varying different parameters, e.g., time of electrolysis, magnitude of voltage applied, and electrolyte concentration. An open-circuit voltage (OCV) of 1.3 V is obtained from two regenerative fuel cells in series with a total active electrode area of 300 cm 2. A current density of about 0.5 mA cm -2 is generated using 0.5N NaHCO 3 when 4.5 V is applied for 25 min. A maximum power of 36.5 mW is obtained at 0.21 mA cm -2.

  11. Feasibility Study of a HOM IOT for TESLA

    NASA Astrophysics Data System (ADS)

    Schütt, Petra; Weiland, Thomas; Gamp, Alexander; Lu, Fuhai

    1997-05-01

    For the TESLA linear collider 1.3 GHz RF sources with 10 MW peak power and about 70% efficiency are needed. As an alternative to the development of a Multibeam-Klystron, we investigate the feasibility of an IOT (Inductive Output Tube). This is a very compact RF source: The time structure of the beam is produced by a gated emission cathode and the output cavity is directly adjacent to the anode. Unlike IOTs, conventional klystrons lose some of their design efficiency when they are operated below saturation, because only the RF component of the beam is reduced and not the DC beam current. In contrast to this the cathode current of an IOT is controlled by the drive power. In order to keep the gun voltage low, we investigate a device with a hollow beam where the output cavity is excited in a higher order mode (HOM), as was recently suggested by CPI(E.Lien, H.Bohlen, US Patent Application Serial No. 08/413,034). Computer simulations are carried out with the CAD-system MAFIA. First, an existing Klystrode TM IOT built by CPI is analysed. Simulation results will be shown and compared to experimental data. Based upon this experience, a design strategy is discussed for the HOM IOT.

  12. Feasibility study: Atmospheric general circulation experiment, volume 1

    NASA Technical Reports Server (NTRS)

    Homsey, R. J. (Editor)

    1981-01-01

    The atmospheric general circulation experiment (AGCE) uses a rotating fluid flow cell assembly. The key technical areas affecting the feasibility of the design and operation of the AGCE are investigated. The areas investigated include materials for the flow cell assembly, thermal design, high voltage power supply design, effective retrieval and handling of experiment data and apparatus configuration. Several materials, DMSO and m-tolunitrile, were selected as candidate fluids for the flow cell principally for their high dielectric constant which permits the high voltage power supply design to be held to 15 kV and still simulate terrestrial gravity. Achievement of a low dissipation factor in the fluid to minimize internal heating from the applied electrical field depends strongly on purification and handling procedures. The use of sapphire as the outer hemisphere for the flow cell provides excellent viewing conditions without a significant impact on attaining the desired thermal gradients. Birefringent effects from sapphire can be held to acceptably low limits. Visualization of flow fluid is achieved through the motion of a dot matrix formed by photochromic dyes. Two dyes found compatible with the candidate fluids are spiropyran and triarylmethane. The observation of the dot motion is accomplished using a flying spot scanner.

  13. Leak detection by acoustic emission monitoring. Phase 1: Feasibility study

    NASA Astrophysics Data System (ADS)

    Lichtenstein, Bernard; Winder, A. A.

    1994-05-01

    This investigation was conducted to determine the feasibility of detecting leaks from underground storage tanks or pipelines using acoustic emissions. An extensive technical literature review established that distinguishable acoustic emission signals will be generated when a storage tank is subjected to deformation stresses. A parametric analysis was performed which indicated that leak rates less than 0.1 gallons per hour can be detected for leak sizes less than 1/32 inch with 99% probability if the transient signals were sensed with an array of accelerometers (cemented to the tank or via acoustic waveguides), each having a sensitivity greater than 250 mv/g over a frequency range of 0.1 to 4000 Hz, and processed in a multi-channel Fourier spectrum analyzer with automatic threshold detection. An acoustic transient or energy release processor could conceivably detect the onset of the leak at the moment of fracture of the tank wall. The primary limitations to realizing reliable and robust acoustic emission monitoring of underground fluid leaks are the various masking noise sources prevalent at Air Force bases, which are attributed to aircraft, motor traffic, pump station operation, and ground tremors.

  14. Engaging Community Businesses in HIV Prevention: A Feasibility Study

    PubMed Central

    Rovniak, Liza S.; Hovell, Melbourne F.; Hofstetter, C. Richard; Blumberg, Elaine J.; Sipan, Carol L.; Batista, Marcia F.; Martinez-Donate, Ana P.; Mulvihill, Mary M.; Ayala, Guadalupe X.

    2009-01-01

    Purpose To explore the feasibility of engaging community businesses in HIV prevention. Design Randomly selected business owners/managers were asked to display discreetly wrapped condoms and brochures provided free-of-charge for 3 months. Assessments were conducted at baseline, mid-, and post-program. Customer feedback was obtained through an online survey. Setting San Diego, California neighborhood with a high rate of AIDS. Subjects Fifty-one business owners/managers representing 10 retail categories, and 52 customers. Measures Participation rates, descriptive characteristics, number of condoms and brochures distributed, customer feedback, business owners'/managers' program satisfaction and willingness to provide future support for HIV prevention. Analysis Kruskal-Wallis, Mann-Whitney U, Fisher's exact, and McNemar's tests were used to analyze data. Results The 20 business owners/managers (39%) who agreed to distribute condoms and brochures reported fewer years in business and more employees than those who agreed only to distribute brochures (20%) or refused to participate (41%), p <.05. Bars were the easiest of ten retail categories to recruit. Businesses with more employees and customers distributed more condoms and brochures, p < .05. More than 90% of customers supported distributing condoms and brochures in businesses and 96% of business owners/managers described their program experience as “positive.” Conclusion Businesses are willing to distribute condoms and brochures to prevent HIV. Policies to increase business participation in HIV prevention should be developed and tested. PMID:20465150

  15. X-ray fluorescence surface contaminant analyzer: A feasibility study

    NASA Technical Reports Server (NTRS)

    Eldridge, Hudson B.

    1988-01-01

    The bonding of liner material to the inner metal surfaces of solid rocket booster cases is adversely affected by minute amounts of impurities on the metal surface. Suitable non-destructive methods currently used for detecting these surface contaminants do not provide the means of identifying their elemental composition. The feasibility of using isotopic source excited energy dispersive X-ray fluorescence as a possible technique for elemental analysis of such contaminants is investigated. A survey is made of the elemental compositions of both D-6ac steel, a common construction material for the booster cases, and Conoco HD-2 grease, a common surface contamination. Source and detector choices that maximize signal to noise ratio in a Recessed Source Geometry are made. A Monte Carlo simulation is then made of the optimized device incorporating the latest available X-ray constants at the energy of the chosen source to determine the device's response to a D-6ac steel surface contained with Conoco HD-2 grease.

  16. Synthesis, Characterization, and Study of In Vitro Cytotoxicity of ZnO-Fe3O4 Magnetic Composite Nanoparticles in Human Breast Cancer Cell Line (MDA-MB-231) and Mouse Fibroblast (NIH 3T3).

    PubMed

    Bisht, Gunjan; Rayamajhi, Sagar; Kc, Biplab; Paudel, Siddhi Nath; Karna, Deepak; Shrestha, Bhupal G

    2016-12-01

    Novel magnetic composite nanoparticles (MCPs) were successfully synthesized by ex situ conjugation of synthesized ZnO nanoparticles (ZnO NPs) and Fe3O4 NPs using trisodium citrate as linker with an aim to retain key properties of both NPs viz. inherent selectivity towards cancerous cell and superparamagnetic nature, respectively, on a single system. Successful characterization of synthesized nanoparticles was done by XRD, TEM, FTIR, and VSM analyses. VSM analysis showed similar magnetic profile of thus obtained MCPs as that of naked Fe3O4 NPs with reduction in saturation magnetization to 16.63 emu/g. Also, cell viability inferred from MTT assay showed that MCPs have no significant toxicity towards noncancerous NIH 3T3 cells but impart significant toxicity at similar concentration to breast cancer cell MDA-MB-231. The EC50 value of MCPs on MDA-MB-231 is less than that of naked ZnO NPs on MDA-MB-231, but its toxicity on NIH 3T3 was significantly reduced compared to ZnO NPs. Our hypothesis for this prominent difference in cytotoxicity imparted by MCPs is the synergy of selective cytotoxicity of ZnO nanoparticles via reactive oxygen species (ROS) and exhausting scavenging activity of cancerous cells, which further enhance the cytotoxicity of Fe3O4 NPs on cancer cells. This dramatic difference in cytotoxicity shown by the conjugation of magnetic Fe3O4 NPs with ZnO NPs should be further studied that might hold great promise for the development of selective and site-specific nanoparticles. Schematic representation of the conjugation, characterization and cytotoxicity analysis of Fe3O4-ZnO magnetic composite particles (MCPs).

  17. Synthesis, Characterization, and Study of In Vitro Cytotoxicity of ZnO-Fe3O4 Magnetic Composite Nanoparticles in Human Breast Cancer Cell Line (MDA-MB-231) and Mouse Fibroblast (NIH 3T3)

    NASA Astrophysics Data System (ADS)

    Bisht, Gunjan; Rayamajhi, Sagar; KC, Biplab; Paudel, Siddhi Nath; Karna, Deepak; Shrestha, Bhupal G.

    2016-12-01

    Novel magnetic composite nanoparticles (MCPs) were successfully synthesized by ex situ conjugation of synthesized ZnO nanoparticles (ZnO NPs) and Fe3O4 NPs using trisodium citrate as linker with an aim to retain key properties of both NPs viz. inherent selectivity towards cancerous cell and superparamagnetic nature, respectively, on a single system. Successful characterization of synthesized nanoparticles was done by XRD, TEM, FTIR, and VSM analyses. VSM analysis showed similar magnetic profile of thus obtained MCPs as that of naked Fe3O4 NPs with reduction in saturation magnetization to 16.63 emu/g. Also, cell viability inferred from MTT assay showed that MCPs have no significant toxicity towards noncancerous NIH 3T3 cells but impart significant toxicity at similar concentration to breast cancer cell MDA-MB-231. The EC50 value of MCPs on MDA-MB-231 is less than that of naked ZnO NPs on MDA-MB-231, but its toxicity on NIH 3T3 was significantly reduced compared to ZnO NPs. Our hypothesis for this prominent difference in cytotoxicity imparted by MCPs is the synergy of selective cytotoxicity of ZnO nanoparticles via reactive oxygen species (ROS) and exhausting scavenging activity of cancerous cells, which further enhance the cytotoxicity of Fe3O4 NPs on cancer cells. This dramatic difference in cytotoxicity shown by the conjugation of magnetic Fe3O4 NPs with ZnO NPs should be further studied that might hold great promise for the development of selective and site-specific nanoparticles.

  18. Is the Relationship between Cortical and White Matter Pathologic Changes in Multiple Sclerosis Spatially Specific? A Multimodal 7-T and 3-T MR Imaging Study with Surface and Tract-based Analysis

    PubMed Central

    Louapre, Céline; Govindarajan, Sindhuja T.; Giannì, Costanza; Cohen-Adad, Julien; Gregory, Michael D.; Nielsen, A. Scott; Madigan, Nancy; Sloane, Jacob A.; Kinkel, Revere P.

    2016-01-01

    Purpose To investigate in vivo the spatial specificity of the interdependence between intracortical and white matter (WM) pathologic changes as function of cortical depth and distance from the cortex in multiple sclerosis (MS), and their independent contribution to physical and cognitive disability. Materials and Methods This study was institutional review board–approved and participants gave written informed consent. In 34 MS patients and 17 age-matched control participants, 7-T quantitative T2* maps, 3-T T1-weighted anatomic images for cortical surface reconstruction, and 3-T diffusion tensor images (DTI) were obtained. Cortical quantitative T2* maps were sampled at 25%, 50%, 75% depth from pial surface. Tracts of interest were reconstructed by using probabilistic tractography. The relationship between DTI metrics voxelwise of the tracts and cortical integrity in the projection cortex was tested by using multilinear regression models. Results In MS, DTI abnormal findings along tracts correlated with quantitative T2* changes (suggestive of iron and myelin loss) at each depth of the cortical projection area (P < .01, corrected). This association, however, was not spatially specific because abnormal findings in WM tracts also related to cortical pathologic changes outside of the projection cortex of the tract (P < .001). Expanded Disability Status Scale pyramidal score was predicted by axial diffusivity along the corticospinal tract (β = 4.6 × 103; P < .001), Symbol Digit Modalities Test score by radial diffusivity along the cingulum (β = −4.3 × 104; P < .01), and T2* in the cingulum cortical projection at 25% depth (β = −1.7; P < .05). Conclusion Intracortical and WM injury are concomitant pathologic processes in MS, which are not uniquely distributed according to a tract-cortex–specific pattern; their association may reflect a common stage-dependent mechanism. © RSNA, 2015 Online supplemental material is available for this article. An earlier

  19. Using Wearable Computers in Shuttle Processing: A Feasibility Study

    NASA Technical Reports Server (NTRS)

    Centeno, Martha A.; Correa, Daisy; Groh-Hammond, Marcia

    2001-01-01

    Shuttle processing operations are performed following prescribed instructions compiled in a Work Authorization Document (WAD). Until very recently, WADs were printed so that they could be properly executed, including the buy off of each and every step by the appropriate authorizing agent. However, with the development of EPICs, Maximo, and PeopleSoft applications, some of these documents are now available in electronic format; hence, it is possible for technicians and engineers to access them on line and buy off the steps electronically. To take full advantage of these developments, technicians need access to such documents at the point of job execution. Body wearable computers present an opportunity to develop a WAD delivery system that enables access while preserving technician's mobility, safety levels, and quality of work done. The primary objectives of this project were to determine if body wearable computers are a feasible delivery system for WADs. More specifically, identify and recommend specific brands of body wearable computers readily available on the market. Thus, this effort has field-tested this technology in two areas of shuttle processing, and it has examined the usability of the technology. Results of two field tests and a Human Factors Usability Test are presented. Section 2 provides a description of the body wearable computer technology. Section 3 presents the test at the Space Shuttle Main Engine (SSME) Shop. Section 4 presents the results of the integration test at the Solid Rocket Boosters Assembly and Refurbishing Facility (SRBARF). Section 5 presents the results of the usability test done at the Operations Support Building (OSB).

  20. Higgins coal gasification/repowering study, feasibility study for alternate fuels. Vol. 1. Executive summary

    SciTech Connect

    Not Available

    1981-12-01

    Florida Power has completed a study to determine the feasibility of repowering 138 MW gross of oil-fired steam-generating capacity at its A.W. Higgins power station (Pinellas Co., Fla.) by utilizing coal-gasification combined-cycle (CGCC) technology. The repowering would add approximately 320 MW of gross electrical generation to the Higgins station through the use of combustion turbines and heat recovery equipment. This study provided Florida Power with the technical, environmental, and economic information necessary to determine the viability of using CGCC at the Higgins station. The plant would use BGC/Lurgi slagging gasifiers and the Selexol acid-gas removal system. Although this new technology represents an acceptable level of risk for the proposed project to be considered technically feasible, the capital-cost estimates were much higher than expected. Florida Power plans to continue further economic evaluations of this CGCC repowering option.

  1. 3T3 cells in adipocytic conversion.

    PubMed

    O'Shea Alvarez, M S

    1991-01-01

    3T3 are murine cells of an established heteroploid cellular line. Some clones of this cellular line, when cultured under adequate conditions differentiate into adipocytes. During the process of differentiation, the cells undergo a change from the elongated fibroblastic shape to a round or oval form and accumulate small drops of lipids within their cytoplasma. These lipid drops fuse into one large drop which displaces the nucleus towards the periphery, giving the cell the aspect of a mature adipocyte of white adipose tissue. The cells not only change their morphology, but they also present important biochemical changes. They show a simultaneous increase in triglyceride synthesis and activity of lipogenic enzymes. There is also an increase in the response of the activity of various hormones and the de novo synthesis of the receptors to such hormones, as insulin and ACTH. During the process of differentiation important changes occur in the synthesis of various proteins, such as actin, tubulin, and other proteins which also make up the cellular cytoskeleton, forming part of the lipid transportation within the adipose cell. The adipocytic differentiation of 3T3 cells depends on adipogenic serum factors used in the supplementary culture medium. These adipogenic factors seem to play an important role in the development of adipose tissue. There are hormones, chemical agents and serum factors which modulate adipocytic differentiation. The clone must be susceptible to adipocytic differentiation, it must reach a quiescent state and find itself in adipogenic conditions for the 3T3 cells to differentiate into adipocytes. It must also carry out an DNA synthesis which is an expression of the new phenotype. The differentiation of 3T3 cells in terminal. The fact that these cells present an adipocytic conversion under physiologic conditions and with adipogenic hormones which exist in the whole animal has been demonstrated. All of these characteristics show that the 3T3 cells may be

  2. Feasibility study of fusion plasma heating by relativistic high-current electron beams

    NASA Astrophysics Data System (ADS)

    Yakimenko, V.

    2017-03-01

    The goal of this research will be to study the feasibility of fusion plasma heating using ultra-short high intensity electron beam by dissipating the energy of excited wakes either in linear or nonlinear regimes.

  3. 76 FR 70152 - Pilot Program for Early Feasibility Study Investigational Device Exemption Applications

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-11-10

    ... HUMAN SERVICES Food and Drug Administration Pilot Program for Early Feasibility Study Investigational Device Exemption Applications AGENCY: Food and Drug Administration, HHS. ACTION: Notice. SUMMARY: The Food and Drug Administration (FDA) is soliciting nominations from sponsors of innovative...

  4. Comparative feasibility study of two concepts for a space-based astrometric satellite

    NASA Technical Reports Server (NTRS)

    Bamdermann, L.; Bareket, N.; Metheny, W.

    1982-01-01

    A comparative feasibility study of two concepts for an astrometric satellite: a visual imaging telescope with a 16.5 meter focal length and a white light interferometer with a 15 meter baseline separation was conducted.

  5. 3D-Flow processor for a programmable Level-1 trigger (feasibility study)

    SciTech Connect

    Crosetto, D.

    1992-10-01

    A feasibility study has been made to use the 3D-Flow processor in a pipelined programmable parallel processing architecture to identify particles such as electrons, jets, muons, etc., in high-energy physics experiments.

  6. Visual Search in the Detection of Retinal Injury: A Feasibility Study

    DTIC Science & Technology

    2013-04-01

    D, Heyes A. et al. Mobility of people with retinitis pigmentosa as a function of vision and psychological variables. Optometry and Vision Science...AFRL-RH-FS-TR-2013-0019 Visual Search in the Detection of Retinal Injury: A Feasibility Study Thomas Kuyk TASC, Inc. Lei Liu The...Detection of Retinal Injury: A Feasibility Study" 2013 0019 LEON N. McLIN, JR., DR-III, DAF Work Unit Manager 711 HPW/ RHDO POLHAMUS.GARR ETT.D

  7. Feasibility Study of Coal Gasification/Fuel Cell/Cogeneration Economic and Financing Assessment,

    DTIC Science & Technology

    1985-08-01

    I p "" r FEASIBILITY STUDY OF COAL GASIFICATION FUEL CELL COGENERATION ECONOMIC AND FINANCING ASSESSMENT Lfl Lfl ’-..,.a REPORT CLIN 0004-0005...GASIFICATION FUEL CELL COGENERATION ECONOMIC AND FINANCING ASSESSMENT REPORT CLIN 0004-0005 PREPARED FOR :...: DEPARTMENT OF THE ARMY AND GEORGETOWN UNIVERSITY...Subtitle) 5. TYPE OF REPORT 6 PERIOD COVERED FEASIBILITY STUDY OF COAL GASIFICATION! Economic/Financing FUEL CELL/COGENERATION, ECONOMIC AND Analysis

  8. A Laboratory Study Investigating the Feasibility of Applying Calcite-Type Coatings to Segregated Ballast Tanks

    DTIC Science & Technology

    1981-08-01

    A LABORATORY STUDY INVESTIGATIING THE FEASIBILITY OF APPLYING CALCITE -TYPE COATINGS TO SEGREGATED BALLAST TANKS AUGUST, 1981 Prepared by: Ocean City...Laboratory Study Investigating The Feasibility of Applying Calcite -Type Coatings to Segregated Ballast Tanks 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c...Executive Summary List of Figures I. Conclusions II. Introduction III. Background-The Development and Use of Calcite -Type Coatings IV. Experimental

  9. Defining Feasibility and Pilot Studies in Preparation for Randomised Controlled Trials: Development of a Conceptual Framework

    PubMed Central

    Eldridge, Sandra M.; Lancaster, Gillian A.; Campbell, Michael J.; Thabane, Lehana; Hopewell, Sally; Coleman, Claire L.; Bond, Christine M.

    2016-01-01

    We describe a framework for defining pilot and feasibility studies focusing on studies conducted in preparation for a randomised controlled trial. To develop the framework, we undertook a Delphi survey; ran an open meeting at a trial methodology conference; conducted a review of definitions outside the health research context; consulted experts at an international consensus meeting; and reviewed 27 empirical pilot or feasibility studies. We initially adopted mutually exclusive definitions of pilot and feasibility studies. However, some Delphi survey respondents and the majority of open meeting attendees disagreed with the idea of mutually exclusive definitions. Their viewpoint was supported by definitions outside the health research context, the use of the terms ‘pilot’ and ‘feasibility’ in the literature, and participants at the international consensus meeting. In our framework, pilot studies are a subset of feasibility studies, rather than the two being mutually exclusive. A feasibility study asks whether something can be done, should we proceed with it, and if so, how. A pilot study asks the same questions but also has a specific design feature: in a pilot study a future study, or part of a future study, is conducted on a smaller scale. We suggest that to facilitate their identification, these studies should be clearly identified using the terms ‘feasibility’ or ‘pilot’ as appropriate. This should include feasibility studies that are largely qualitative; we found these difficult to identify in electronic searches because researchers rarely used the term ‘feasibility’ in the title or abstract of such studies. Investigators should also report appropriate objectives and methods related to feasibility; and give clear confirmation that their study is in preparation for a future randomised controlled trial designed to assess the effect of an intervention. PMID:26978655

  10. Feasibility study of a single-element transcranial focused ultrasound system for blood-brain barrier opening

    NASA Astrophysics Data System (ADS)

    Marquet, Fabrice; Tung, Yao-Sheng; Teichert, Tobias; Ferrera, Vincent P.; Konofagou, Elisa E.

    2012-10-01

    The blood-brain barrier (BBB) is a specialized vascular system that impedes entry of all large and the vast majority of small molecules including the most potent CNS disease therapeutic agents from entering from the lumen into the brain parenchyma. Microbubble-enhanced, focused ultrasound (ME-FUS) has been previously shown to disrupt noninvasively, selectively, and transiently the BBB in small animals in vivo. The study addresses the focusing properties of single-element transducers at intermediate frequencies (500 kHz) through primate and human skulls, targeting clinically relevant targets extracted from 3D brain atlases such as the hippocampus and the basal ganglia, which are typically affected by early Alzheimer's and Parkinson's disease, respectively. A preliminary in vivo study was performed to study the frequency dependence of BBB opening parameters in mice. Then, feasibility of transcranial ME-FUS BBB opening in non-human primates was demonstrated with subsequent BBB recovery. Sonications were combined with two different types of microbubbles (custom made 4-5 μm and Definity®). 3T MRI was used to confirm the BBB disruption and to assess brain damage.

  11. 76 FR 50187 - Intent To Prepare a Draft Environmental Impact Statement (DEIS) for a Study on the Feasibility of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-12

    ...) for a Study on the Feasibility of Deepening Charleston Harbor AGENCY: Department of the Army, U.S... Charleston Harbor Deepening Study (Post-45 study). The purpose of this DEIS and feasibility study is to... conducted in the proposed feasibility phase and would likely involve evaluation of all alternatives...

  12. A feasibility study of hypernuclei reconstruction at NICA/MPD

    NASA Astrophysics Data System (ADS)

    Ilieva, M.; Kolesnikov, V.; Suvarieva, D.; Vasendina, V.; Zinchenko, A.

    2016-01-01

    One of the main tasks of the NICA/MPD physics program is a study of the strangeness production in nuclear collisions. Heavy strange objects (including hypernuclei) could provide essential signatures of the excited and compressed baryonic matter. Study of hypernuclei is important for: understanding the strangeness degrees of freedom in hadronic systems; study of all populated regions in the three-dimensional chart of the nuclides; study of hyperon-nucleus and hyperon-hyperon interactions. The Monte Carlo simulation results presented show that the start version of the MPD detector will provide good conditions for hypernuclei reconstruction in Au+Au collisions at NICA.

  13. A Feasibility Study of Oscillating-Wing Power Generators

    NASA Astrophysics Data System (ADS)

    Lindsey, Keon

    2002-09-01

    Mankind is continually searching for new sources of energy or methods to harness known sources. Recently, renewable and zero-pollution energy supplies are of great interest. Consequently, power generation from a fluttering wing is studied numerically and experimentally. Previous studies have suggested that an oscillating-wing used to extract energy from a fluid flow could deliver power comparable to windmills. Several studies are examined. An oscillating-wing power generator is designed and tested. The experimental results are compared with numerical predictions. Finally, commercial applications of the "environmentally friendly" oscillating-wing generator are investigated.

  14. Teaching primary care in pediatric outpatient department in developing countries: a feasibility study.

    PubMed

    Daga, Subhashchandra R; DSouza, Eric; Ambike, Dipali; Mhatre, Sameer

    2014-04-01

    We studied the feasibility of teaching primary care to undergraduate medical students in an outpatient department (OPD) using a specially developed teaching package. Teaching was conducted in four 30 min sessions during a 4 week rotation term, and a test was offered at the end. We concluded, on the basis of grades achieved in the test, that it is feasible to impart primary care knowledge through OPD teaching using structured teaching goals for teachers.

  15. Feasibility study for geothermal-water space heating for the Safford Federal Prison Camp, Safford, Arizona

    SciTech Connect

    Not Available

    1981-07-01

    The results of an economic feasibility study for the Oregon Institute of Technology regarding a geothermal heating system for the Federal Prison Camp, Safford, Arizona are presented. The following aspects were examined: heat load calculations of the buildings involved; mechanical equipment retrofits necessary to accept geothermal water for the purpose of space heating; cost estimates for the equipment retrofit; and evaluation of the equipment retrofit to determine economic feasibility.

  16. 43 CFR 404.29 - Can the level of effort needed to complete an appraisal investigation or feasibility study be...

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... an appraisal investigation or feasibility study be scaled to be proportional to the size and cost of... § 404.29 Can the level of effort needed to complete an appraisal investigation or feasibility study be... effort for an appraisal investigation or feasibility study should be scaled to take into...

  17. 43 CFR 404.33 - How much Federal funding can Reclamation provide for the completion of a feasibility study?

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... provide for the completion of a feasibility study? 404.33 Section 404.33 Public Lands: Interior... of a feasibility study? In general, Reclamation will be responsible for 50 percent of the cost of a feasibility study conducted under § 404.11(a) or (b). You will be responsible to pay for the remaining...

  18. 43 CFR 404.25 - How can I request Reclamation to review an appraisal investigation or feasibility study that was...

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... appraisal investigation or feasibility study that was not completed under this program? 404.25 Section 404... review an appraisal investigation or feasibility study that was not completed under this program? (a) To request Reclamation to review an appraisal investigation or feasibility study that was not completed...

  19. 43 CFR 404.36 - Will Reclamation reimburse me for the cost of an appraisal investigation or a feasibility study...

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... of an appraisal investigation or a feasibility study that was not completed under § 404.11(a) or (b... Reclamation reimburse me for the cost of an appraisal investigation or a feasibility study that was not... appraisal investigations and feasibility studies that are completed under the program pursuant to §...

  20. 43 CFR 404.19 - What requirements must be met before I can request assistance to conduct a feasibility study?

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... request assistance to conduct a feasibility study? 404.19 Section 404.19 Public Lands: Interior... a feasibility study? All of the following requirements must be met before you can request assistance to conduct a feasibility study: (a) An appraisal investigation must be completed, with or...

  1. 43 CFR 404.29 - Can the level of effort needed to complete an appraisal investigation or feasibility study be...

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... an appraisal investigation or feasibility study be scaled to be proportional to the size and cost of... § 404.29 Can the level of effort needed to complete an appraisal investigation or feasibility study be... effort for an appraisal investigation or feasibility study should be scaled to take into...

  2. 43 CFR 404.36 - Will Reclamation reimburse me for the cost of an appraisal investigation or a feasibility study...

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... of an appraisal investigation or a feasibility study that was not completed under § 404.11(a) or (b... Reclamation reimburse me for the cost of an appraisal investigation or a feasibility study that was not... appraisal investigations and feasibility studies that are completed under the program pursuant to §...

  3. 43 CFR 404.25 - How can I request Reclamation to review an appraisal investigation or feasibility study that was...

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... appraisal investigation or feasibility study that was not completed under this program? 404.25 Section 404... review an appraisal investigation or feasibility study that was not completed under this program? (a) To request Reclamation to review an appraisal investigation or feasibility study that was not completed...

  4. 43 CFR 404.33 - How much Federal funding can Reclamation provide for the completion of a feasibility study?

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... provide for the completion of a feasibility study? 404.33 Section 404.33 Public Lands: Interior... of a feasibility study? In general, Reclamation will be responsible for 50 percent of the cost of a feasibility study conducted under § 404.11(a) or (b). You will be responsible to pay for the remaining...

  5. A feasibility study for advanced technology integration for general aviation

    NASA Technical Reports Server (NTRS)

    Kohlman, D. L.; Matsuyama, G. T.; Hawley, K. E.; Meredith, P. T.

    1980-01-01

    An investigation was conducted to identify candidate technologies and specific developments which offer greatest promise for improving safety, fuel efficiency, performance, and utility of general aviation airplanes. Interviews were conducted with general aviation airframe and systems manufacturers and NASA research centers. The following technologies were evaluated for use in airplane design tradeoff studies conducted during the study: avionics, aerodynamics, configurations, structures, flight controls, and propulsion. Based on industry interviews and design tradeoff studies, several recommendations were made for further high payoff research. The most attractive technologies for use by the general aviation industry appear to be advanced engines, composite materials, natural laminar flow airfoils, and advanced integrated avionics systems. The integration of these technologies in airplane design can yield significant increases in speeds, ranges, and payloads over present aircraft with 40 percent to 50 percent reductions in fuel used.

  6. Feasibility Study for Vitrification of Sodium-Bearing Waste

    SciTech Connect

    J. J. Quigley; B. D. Raivo; S. O. Bates; S. M. Berry; D. N. Nishioka; P. J. Bunnell

    2000-09-01

    Treatment of sodium-bearing waste (SBW) at the Idaho Nuclear Technology and Engineering Center (INTEC) within the Idaho National Engineering and Environmental Laboratory is mandated under a Settlement Agreement between the Department of Energy and the State of Idaho. One of the requirements of the Settlement Agreement is the complete calcination (i.e., treatment) of all SBW by December 31, 2012. One of the proposed options for treatment of SBW is vitrification. This study will examine the viability of SBW vitrification. This study describes the process and facilities to treat the SBW, from beginning waste input from INTEC Tank Farm to the final waste forms. Schedules and cost estimates for construction and operation of a Vitrification Facility are included. The study includes a facility layout with drawings, process description and flow diagrams, and preliminary equipment requirements and layouts.

  7. Mississippi River Headwaters Lakes in Minnesota. Feasibility Study. Appendices.

    DTIC Science & Technology

    1982-09-01

    at Days High Landing 1,203.8 - 3,175 Mississippi River at Pokegama Dam 1,183.8 - 3,265 Prairie River (mouth) 1,177.5 446 3,900 Swan River (mouth...30.0 200 at Jacobson, approxi- mately one-half mile downstream from Swan River mouth (1) UM = Upper Mississippi. SW = Swan River. (2) Values listed...River reaches, the Prairie River, and Swan River were studied by approximate methods. C-1 c. A current study by the Department of Housing and Urban

  8. Insect-Based Vision for Autonomous Vehicles: A Feasibility Study

    NASA Technical Reports Server (NTRS)

    Srinivasan, Mandyam V.

    1999-01-01

    The aims of the project were to use a high-speed digital video camera to pursue two questions: i) To explore the influence of temporal imaging constraints on the performance of vision systems for autonomous mobile robots; To study the fine structure of insect flight trajectories with in order to better understand the characteristics of flight control, orientation and navigation.

  9. Insect-Based Vision for Autonomous Vehicles: A Feasibility Study

    NASA Technical Reports Server (NTRS)

    Srinivasan, Mandyam V.

    1999-01-01

    The aims of the project were to use a high-speed digital video camera to pursue two questions: (1) To explore the influence of temporal imaging constraints on the performance of vision systems for autonomous mobile robots; (2) To study the fine structure of insect flight trajectories in order to better understand the characteristics of flight control, orientation and navigation.

  10. ACLCP Periodical Storage Center: Feasibility Study, September 1974-April 1975.

    ERIC Educational Resources Information Center

    Cieslicki, Dorothy

    A study of alternative models for establishing a cooperative storage center for little used library materials by the members of the Area College Libraries of Central Pennsylvania (ACLCP) focused on periodicals. Considerations discussed include advantages--lower cost; space for growth and better access to holdings retained in active collections;…

  11. TOEFL and Hearing Impaired Students: A Feasibility Study.

    ERIC Educational Resources Information Center

    Ragosta, Marjorie; Nelson, Catherine

    The Test of English as a Foreign Language (TOEFL) was administered to 26 hearing impaired college students, in order to test the assumption that the English-language deficiencies of hearing impaired students are similar to those of foreign students. The students were attending Gallaudet College's School of Preparatory Studies and were identified…

  12. Feasibility study of algae-based CO2 capture

    EPA Science Inventory

    Abstract: The biomass of microalgae contains approximately 50% carbon, which is commonly obtained from the atmosphere, but can also be taken from commercial sources that produce CO2, such as coal-fired power plants. A study of operational demonstration projects is being underta...

  13. Feasibility study of using satellites for a disaster warning system

    NASA Technical Reports Server (NTRS)

    1973-01-01

    The development of requirements for the Disaster Warning System (DWS) was investigated in relation to the National Weather Service. Conceptual communication traffic flow patterns for the future of the NWS are studied to determine the impact of the DWS on the MWS. The planned warning systems, and satellite communications are discussed along with data collection, and communication services.

  14. Feasibility study of algae-based Carbon Dioxide capture

    EPA Science Inventory

    SUMMARY: The biomass of microalgae contains approximately 50% carbon, which is commonly obtained from the atmosphere, but can also be taken from commercial sources that produce CO2, such as coal-fired power plants. A study of operational demonstration projects is being undertak...

  15. Feasibility study of algae-based CO2 capture

    EPA Science Inventory

    The biomass of microalgae contains approximately 50% carbon, which is commonly obtained from the atmosphere, but can also be taken from commercial sources that produce CO2, such as coal-fired power plants. A study of operational demonstration projects is being undertaken to eval...

  16. Community paediatric respiratory infection surveillance study protocol: a feasibility, prospective inception cohort study

    PubMed Central

    Anderson, Emma C; Ingle, Suzanne Marie; Muir, Peter; Beck, Charles; Finn, Adam; Leeming, John Peter; Cabral, Christie; Kesten, Joanna May; Hay, Alastair D

    2016-01-01

    Introduction Paediatric respiratory tract infections (RTIs) are common reasons for primary care consultations and antibiotic prescribing. Locally relevant syndromic and microbiological surveillance information has the potential to improve the care of children with RTIs by normalising illness (parents) and reducing uncertainty (clinicians). Currently, most RTI studies are conducted at the point of healthcare service consultation, leaving the community burden, microbiology, symptom duration and proportion consulting largely unknown. This study seeks to establish the feasibility of (mainly online) participant recruitment and retention, and the acceptability/comparability of parent versus nurse-collected microbiological sampling, to inform the design of a future surveillance intervention study. Evidence regarding consultation rates and symptom duration is also sought. Methods and analysis A community-based, feasibility prospective inception cohort study, recruiting children aged ≥3 months and <16 years and their parents via general practitioner surgery invitation letter, aiming to collect data on 300 incident RTIs by July 2016. Following informed consent, parents provide baseline (demographic) data online, and respond to weekly emails to confirm the absence/presence of new RTI symptoms. Once symptomatic, parents provide daily data online (RTI symptoms, school/day-care attendance, time off work, health service use, medication), and a research nurse visits to collect clinical examination data and microbiological (nasal and saliva) swabs. Parents are invited to provide symptomatic (at nurse visit, but without nurse assistance) and asymptomatic (alone) swabs on recovery. A review of primary care medical notes will gather medical history, health service utilisation, referral and antibiotic prescribing rates. Feasibility will be assessed using recruitment and retention rates, data completeness; and acceptability by quantitative survey and qualitative interviews

  17. Out-of-bed extubation: a feasibility study

    PubMed Central

    Dexheimer Neto, Felippe Leopoldo; Vesz, Patrini Silveira; Cremonese, Rafael Viegas; Leães, Clarissa Garcia Soares; Raupp, Ana Carolina Tabajara; Rodrigues, Cristiano dos Santos; de Andrade, Juliana Mara Stormovski; Townsend, Raquel da Silva; Maccari, Juçara Gasparetto; Teixeira, Cassiano

    2014-01-01

    Objective In clinical intensive care practice, weaning from mechanical ventilation is accompanied by concurrent early patient mobilization. The aim of this study was to compare the success of extubation performed with patients seated in an armchair compared to extubation with patients in a supine position. Methods A retrospective study, observational and non-randomized was conducted in a mixed-gender, 23-bed intensive care unit. The primary study outcome was success of extubation, which was defined as the patient tolerating the removal of the endotracheal tube for at least 48 hours. The differences between the study groups were assessed using Student's t-test and chi-squared analysis. Results Ninety-one patients were included from December 2010 and June 2011. The study population had a mean age of 71 years ± 12 months, a mean APACHE II score of 21±7.6, and a mean length of mechanical ventilation of 2.6±2 days. Extubation was performed in 33 patients who were seated in an armchair (36%) and in 58 patients in a supine position (64%). There were no significant differences in age, mean APACHE II score or length of mechanical ventilation between the two groups, and a similar extubation success rate was observed (82%, seated group versus 85%, supine group, p>0.05). Furthermore, no significant differences were found between the two groups in terms of post-extubation distress, need for tracheostomy, duration of mechanical ventilation weaning, or intensive care unit stay. Conclusion Our results suggest that the clinical outcomes of patients extubated in a seated position are similar to those of patients extubated in a supine position. This new practice of seated extubation was not associated with adverse events and allowed extubation to occur simultaneously with early mobilization. PMID:25295820

  18. Troglitazone inhibits the expression of inducible nitric oxide synthase in adipocytes in vitro and in vivo study in 3T3-L1 cells and Otsuka Long-Evans Tokushima Fatty rats.

    PubMed

    Dobashi, K; Asayama, K; Nakane, T; Kodera, K; Hayashibe, H; Nakazawa, S

    2000-09-15

    The aim of this study was to determine the mechanism of troglitazone action on nitric oxide (NO) production via inducible NO synthase (iNOS) in adipocytes in vitro and in vivo. The treatment of 3T3-L1 adipocytes with the combination of lipopolysaccharide (LPS), tumor necrosis factor-alpha and interferon-gamma synergistically induced de novo iNOS expression leading to enhanced NO production. The NO production was inhibited by co-treatment with aminoguanidine or N-nitro-L-arginine methylester hydrochloride. Troglitazone inhibited the NO production in a dose dependent manner by the suppression of iNOS expression. In the 24 week-old Otsuka Long-Evans Tokushima Fatty (OLETF) rats, the mean weight and the blood glucose were 21% and 30%, respectively, higher than in their lean counterparts. The serum nitrite concentration was increased after injection of LPS (4 mg/kg, i.p.), more markedly in OLETF rats than in the lean rats. The epididymal fats from LPS-injected groups, but not the ones from the non-injected groups, expressed mRNA and protein of iNOS. Troglitazone pre-treatment blocked the LPS-induced expression of iNOS in adipose tissue and the increase in serum nitrite concentration. These results suggest that troglitazone inhibits the cytokine-induced NO production in adipocytes by blocking iNOS expression both in vitro and in vivo.

  19. Feasibility Study of Hydrogen Production at Existing Nuclear Power Plants

    SciTech Connect

    Stephen Schey

    2009-07-01

    Cooperative Agreement DE-FC07-06ID14788 was executed between the U.S. Department of Energy, Electric Transportation Applications, and Idaho National Laboratory to investigate the economics of producing hydrogen by electrolysis using electricity generated by nuclear power. The work under this agreement is divided into the following four tasks: Task 1 – Produce Data and Analyses Task 2 – Economic Analysis of Large-Scale Alkaline Electrolysis Task 3 – Commercial-Scale Hydrogen Production Task 4 – Disseminate Data and Analyses. Reports exist on the prospect that utility companies may benefit from having the option to produce electricity or produce hydrogen, depending on market conditions for both. This study advances that discussion in the affirmative by providing data and suggesting further areas of study. While some reports have identified issues related to licensing hydrogen plants with nuclear plants, this study provides more specifics and could be a resource guide for further study and clarifications. At the same time, this report identifies other area of risks and uncertainties associated with hydrogen production on this scale. Suggestions for further study in some of these topics, including water availability, are included in the report. The goals and objectives of the original project description have been met. Lack of industry design for proton exchange membrane electrolysis hydrogen production facilities of this magnitude was a roadblock for a significant period. However, recent design breakthroughs have made costing this facility much more accurate. In fact, the new design information on proton exchange membrane electrolyzers scaled to the 1 kg of hydrogen per second electrolyzer reduced the model costs from $500 to $100 million. Task 1 was delayed when the original electrolyzer failed at the end of its economic life. However, additional valuable information was obtained when the new electrolyzer was installed. Products developed during this study

  20. FBI fingerprint identification automation study. AIDS 3 evaluation report. Volume 4: Economic feasibility

    NASA Technical Reports Server (NTRS)

    Mulhall, B. D. L.

    1980-01-01

    The results of the economic analysis of the AIDS 3 system design are presented. AIDS 3 evaluated a set of economic feasibility measures including life cycle cost, implementation cost, annual operating expenditures and annual capital expenditures. The economic feasibility of AIDS 3 was determined by comparing the evaluated measures with the same measures, where applicable, evaluated for the current system. A set of future work load scenarios was constructed using JPL's environmental evaluation study of the fingerprint identification system. AIDS 3 and the current system were evaluated for each of the economic feasibility measures for each of the work load scenarios. They were compared for a set of performance measures, including response time and accuracy, and for a set of cost/benefit ratios, including cost per transaction and cost per technical search. Benefit measures related to the economic feasibility of the system are also presented, including the required number of employees and the required employee skill mix.

  1. FEASIBILITY STUDY II OF A MUON BASED NEUTRINO SOURCE.

    SciTech Connect

    GALLARDO,J.C.; OZAKI,S.; PALMER,R.B.; ZISMAN,M.

    2001-06-30

    The concept of using a muon storage ring to provide a well characterized beam of muon and electron neutrinos (a Neutrino Factory) has been under study for a number of years now at various laboratories throughout the world. The physics program of a Neutrino Factoryis focused on the relatively unexplored neutrino sector. In conjunction with a detector located a suitable distance from the neutrino source, the facility would make valuable contributions to the study of neutrino masses and lepton mixing. A Neutrino Factory is expected to improve the measurement accuracy of sin{sup 2}(2{theta}{sub 23}) and {Delta}m{sup 2}{sub 32} and provide measurements of sin{sup 2}(2{theta}{sub 13}) and the sign of {Delta}m{sup 2}{sub 32}. It may also be able to measure CP violation in the lepton sector.

  2. Integrating LMINET with TAAM and SIMMOD: A Feasibility Study

    NASA Technical Reports Server (NTRS)

    Long, Dou; Stouffer-Coston, Virginia; Kostiuk, Peter; Kula, Richard; Yackovetsky, Robert (Technical Monitor)

    2001-01-01

    LMINET is a queuing network air traffic simulation model implemented at 64 large airports and the entire National Airspace System in the United States. TAAM and SIMMOD are two widely used air traffic event-driven simulation models mostly for airports. Based on our proposed Progressive Augmented window approach, TAAM and SIMMOD are integrated with LMINET though flight schedules. In the integration, the flight schedules are modified through the flight delays reported by the other models. The benefit to the local simulation study is to let TAAM or SIMMOD take the modified schedule from LMINET, which takes into account of the air traffic congestion and flight delays at the national network level. We demonstrate the value of the integrated models by the case studies at Chicago O'Hare International Airport and Washington Dulles International Airport. Details of the integration are reported and future work for a full-blown integration is identified.

  3. Containerized Command/Control Spaces: A Feasibility Study

    DTIC Science & Technology

    1973-07-01

    other materials, was not made nor was the corrosionI" problem of coupling aluminum to steel -adequately studied. The second variable, container...material, however quite costly. (3) Steel piping - ordinary steel piping as available off& the shelf was the material considered here. (4) Copper piping - it...of metal. It presents a galvanic corrosion problem A when coupled to steel hull piping. (6) Rubber hose - systems offer flexibility and simplicity. (7

  4. Feasibility Study: Ductless Hydronic Distribution Systems with Fan Coil Delivery

    SciTech Connect

    Springer, D.; Dakin, B.; Backman, C.

    2012-07-01

    The primary objectives of this study are to estimate potential energy savings relative to conventional ducted air distribution, and to identify equipment requirements, costs, and barriers with a focus on ductless hydronic delivery systems that utilize water-to-air terminal units in each zone. Results indicate that annual heating and cooling energy use can be reduced by up to 27% assuming replacement of the conventional 13 SEER heat pump and coil with a similarly rated air-to-water heat pump.

  5. Environmental process improvement feasibility study and demonstration program

    NASA Technical Reports Server (NTRS)

    Martin, Rodger L.

    1994-01-01

    This report is the final product of an environmental study conducted by Western Commercial Space Center, Inc. under contract to Tennessee-Calspan Center for Space Transportation and Applied Research. The purpose of this investigation is to accurately document the current environmental and permitting processes associated with commercial space launch activity at Vandenberg AFB, and make recommendations to streamline those processes. The particular areas of interest focus on: identifying applicable Federal, state, and local laws, Department of Defense directives, and Air force regulations; defining the environmental process on Vandenberg AFB and how it relates with other agencies, including Federal and state regulatory agencies; and defining the air quality permit process. Study investigation results are applied to an example Pilot Space Launch Vehicle (PSLV) planning to launch from Vandenberg AFB. The PSLV space hardware is analyzed with respect to environmental and permitting issues associated with vehicle processing, facilities required (existing or new), and launch. The PSLV verified the earlier findings of the study and gave insight into streamlining recommendations.

  6. Agricultural pest monitoring using fluorescence lidar techniques. Feasibility study

    NASA Astrophysics Data System (ADS)

    Mei, L.; Guan, Z. G.; Zhou, H. J.; Lv, J.; Zhu, Z. R.; Cheng, J. A.; Chen, F. J.; Löfstedt, C.; Svanberg, S.; Somesfalean, G.

    2012-03-01

    The fluorescence of different types of planthopper ( Hemiptera) and moth ( Lepidoptera), which constitute important Chinese agricultural pests, was investigated both in situ in a laboratory setting and remotely using a fluorescence light detection and ranging (lidar) system operating at a range of about 50 m. The natural autofluorescence of different species, as well as the fluorescence from insects that had been dusted with fluorescent dye powder for identification were studied. Autofluorescence spectra of both moths and planthoppers show a maximum intensity peak around 450 nm. Bleaching upon long-time laser illumination was modest and did not affect the shape of the spectrum. A single dyed rice planthopper, a few mm in size, could be detected at 50 m distance by using the fluorescence lidar system. By employing various marking dyes, different types of agricultural pest could be determined. We suggest that lidar may be used in studies of migration and movement of pest insects, including studies of their behavior in the vicinity of pheromone traps and in pheromone-treated fields.

  7. Feasibility study of archaeological structures scanning by muon tomography

    SciTech Connect

    Gómez, H.; Katsanevas, S.; Tonazzo, A.; Carloganu, C.; Niess, V.; Gibert, D.; Marteau, J.

    2015-08-17

    One of the main concerns in archaeology is to find of a method to study precisely archaeological structures in the least invasive way possible to avoid damage. The requirement of preserving the structures integrity prevents, in the case of pyramids or tumuli, the study of any internal structure (halls or tombs) which are not reachable by existing corridors. One non-invasive method is the muon tomography. By placing a detector which allows to register the muon direction after the structure, it is possible to have an idea of its composition based on the attenuation of the muon flux, which depends on the material length and density that muons have crossed. This technique, alone or together with other exploration techniques as seismic tomography or electrical resistivity tomography, can provide useful information about the internal structure of the archaeological form that can not be obtained by conventional archaeological methods. In this work, the time measurement necessary to obtain a significant result about the composition of an archaeological structure is estimated. To do that, a Monte Carlo simulation framework based on the MUSIC software, properly tuned for this study, has been developed. The particular case of the Kastas Amfipoli Macedonian tumulus has been considered to perform the simulations.

  8. Space shuttle/food system study. Package feasibility study, modifications 3S, 4C and 5S

    NASA Technical Reports Server (NTRS)

    1974-01-01

    An optimum feeding system for the space shuttle was presented. This system consisted of all rehydratable type foods which were enclosed in a 4 in. x 4 in. x 1 in. flexible package. A feasibility follow-on study was conducted, and two acceptable, feasible prototypes for this package are described.

  9. White phosphorus pits focused feasibility study final July 2007.

    SciTech Connect

    Davis, B.; Martino, L.

    2007-08-21

    The White Phosphorus Burning Pits (WPP) Area of Concern (AOC) is a site of about 5.5 acres (2.2 ha) located in the J-Field Study Area, in the Edgewood Area of Aberdeen Proving Ground (APG), Maryland (Figure 1.1). Considerable information about the WPP exists as a result of efforts to characterize the hazards associated with J-Field. Contamination in the J-Field Study Area was first detected during an environmental survey of the APG Edgewood Area conducted in 1977 and 1978 (Nemeth et al. 1983) by the U.S. Army Toxic and Hazardous Materials Agency (USATHAMA; predecessor to the U.S. Army Environmental Center). As part of a subsequent USATHAMA environmental survey, 11 wells were installed and sampled at J-Field (three of them at the WPP) (Nemeth 1989). Contamination was also detected in 1983 during a munitions disposal survey conducted by Princeton Aqua Science (1984). The Princeton Aqua Science investigation involved installing and sampling nine wells (four at the WPP) and collecting and analyzing surficial and deep composite soil samples (including samples from the WPP area). In 1986, the U.S. Environmental Protection Agency (EPA) issued a Resource Conservation and Recovery Act (RCRA) Permit (MD3-21-002-1355) requiring a post-wide RCRA Facility Assessment (RFA) and a hydrogeologic assessment of J-Field. In 1987, the U.S. Geological Survey (USGS) began a two-phase hydrogeologic assessment in which data were collected to model groundwater flow at J-Field. Soil-gas investigations were conducted, several well clusters were installed (four at the WPP), a groundwater flow model was developed, and groundwater and surface water monitoring programs were established that continue today. The results of the USGS study were published by Hughes (1993).

  10. Deschutes estuary feasibility study: hydrodynamics and sediment transport modeling

    USGS Publications Warehouse

    George, Douglas A.; Gelfenbaum, Guy; Lesser, Giles; Stevens, Andrew W.

    2006-01-01

    - Provide the completed study to the CLAMP Steering Committee so that a recommendation about a long-term aquatic environment of the basin can be made. The hydrodynamic and sediment transport modeling task developed a number of different model simulations using a process-based morphological model, Delft3D, to help address these goals. Modeling results provide a qualitative assessment of estuarine behavior both prior to dam construction and after various post-dam removal scenarios. Quantitative data from the model is used in the companion biological assessment and engineering design components of the overall study. Overall, the modeling study found that after dam removal, tidal and estuarine processes are immediately restored, with marine water from Budd Inlet carried into North and Middle Basin on each rising tide and mud flats being exposed with each falling tide. Within the first year after dam removal, tidal processes, along with the occasional river floods, act to modify the estuary bed by redistributing sediment through erosion and deposition. The morphological response of the bed is rapid during the first couple of years, then slows as a dynamic equilibrium is reached within three to five years. By ten years after dam removal, the overall hydrodynamic and morphologic behavior of the estuary is similar to the pre-dam estuary, with the exception of South Basin, which has been permanently modified by human activities. In addition to a qualitative assessment of estuarine behavior, process-based modeling provides the ability address specific questions to help to inform decision-making. Considering that predicting future conditions of a complex estuarine environment is wrought with uncertainties, quantitative results in this report are often expressed in terms of ranges of possible outcomes.

  11. A robotic wheelchair trainer: design overview and a feasibility study

    PubMed Central

    2010-01-01

    Background Experiencing independent mobility is important for children with a severe movement disability, but learning to drive a powered wheelchair can be labor intensive, requiring hand-over-hand assistance from a skilled therapist. Methods To improve accessibility to training, we developed a robotic wheelchair trainer that steers itself along a course marked by a line on the floor using computer vision, haptically guiding the driver's hand in appropriate steering motions using a force feedback joystick, as the driver tries to catch a mobile robot in a game of "robot tag". This paper provides a detailed design description of the computer vision and control system. In addition, we present data from a pilot study in which we used the chair to teach children without motor impairment aged 4-9 (n = 22) to drive the wheelchair in a single training session, in order to verify that the wheelchair could enable learning by the non-impaired motor system, and to establish normative values of learning rates. Results and Discussion Training with haptic guidance from the robotic wheelchair trainer improved the steering ability of children without motor impairment significantly more than training without guidance. We also report the results of a case study with one 8-year-old child with a severe motor impairment due to cerebral palsy, who replicated the single-session training protocol that the non-disabled children participated in. This child also improved steering ability after training with guidance from the joystick by an amount even greater than the children without motor impairment. Conclusions The system not only provided a safe, fun context for automating driver's training, but also enhanced motor learning by the non-impaired motor system, presumably by demonstrating through intuitive movement and force of the joystick itself exemplary control to follow the course. The case study indicates that a child with a motor system impaired by CP can also gain a short-term benefit

  12. A Feasibility Study to Control Airfoil Shape Using THUNDER

    NASA Technical Reports Server (NTRS)

    Pinkerton, Jennifer L.; Moses, Robert W.

    1997-01-01

    The objective of this study was to assess the capabilities of a new out-of-plane displacement piezoelectric actuator called thin-layer composite-unimorph ferroelectric driver and sensor (THUNDER) to alter the upper surface geometry of a subscale airfoil to enhance performance under aerodynamic loading. Sixty test conditions, consisting of combinations of five angles of attack, four dc applied voltages, and three tunnel velocities, were studied in a tabletop wind tunnel. Results indicated that larger magnitudes of applied voltage produced larger wafer displacements. Wind-off displacements were also consistently larger than wind-on. Higher velocities produced larger displacements than lower velocities because of increased upper surface suction. Increased suction also resulted in larger displacements at higher angles of attack. Creep and hysteresis of the wafer, which were identified at each test condition, contributed to larger negative displacements for all negative applied voltages and larger positive displacements for the smaller positive applied voltage (+102 V). An elastic membrane used to hold the wafer to the upper surface hindered displacements at the larger positive applied voltage (+170 V). Both creep and hysteresis appeared bounded based on the analysis of several displacement cycles. These results show that THUNDER can be used to alter the camber of a small airfoil under aerodynamic loads.

  13. Rebuilding the Brookhaven high flux beam reactor: A feasibility study

    SciTech Connect

    Brynda, W.J.; Passell, L.; Rorer, D.C.

    1995-01-01

    After nearly thirty years of operation, Brookhaven`s High Flux Beam Reactor (HFBR) is still one of the world`s premier steady-state neutron sources. A major center for condensed matter studies, it currently supports fifteen separate beamlines conducting research in fields as diverse as crystallography, solid-state, nuclear and surface physics, polymer physics and structural biology and will very likely be able to do so for perhaps another decade. But beyond that point the HFBR will be running on borrowed time. Unless appropriate remedial action is taken, progressive radiation-induced embrittlement problems will eventually shut it down. Recognizing the HFBR`s value as a national scientific resource, members of the Laboratory`s scientific and reactor operations staffs began earlier this year to consider what could be done both to extend its useful life and to assure that it continues to provide state-of-the-art research facilities for the scientific community. This report summarizes the findings of that study. It addresses two basic issues: (i) identification and replacement of lifetime-limiting components and (ii) modifications and additions that could expand and enhance the reactor`s research capabilities.

  14. Intraarterial Ultrasound in Pancreatic Cancer: Feasibility Study and Preliminary Results

    SciTech Connect

    Larena-Avellaneda, Axel; Timm, Stephan; Kickuth, Ralph; Kenn, Werner; Steger, Ulrich; Jurowich, Christian; Germer, Christoph-Thomas

    2010-08-15

    Despite technological advances in computed tomography (CT) and magnetic resonance imaging, the involvement of the celiac or mesenteric artery in pancreatic cancer remains uncertain in many cases. Infiltration of these vessels is important in making decisions about therapy choices but often can only be definitively determined through laparotomy. Local (intraarterial) ultrasound may increase diagnostic accuracy. Using the Volcano intravascular ultrasound (IVUS) system, we applied a transfemoral method to scan the celiac and mesenteric arteries directly intraarterial. This technique was used in five patients with suspected pancreatic cancer. Technical success was achieved in all cases. In one case, a short dissection of the mesenteric artery occurred but could be managed interventionally. In tumors that did not contact with the vessels, IVUS was unable to display the tissue pathology. Our main interest was the infiltration of the arteries. In one case, infiltration was certain in the CT scan but uncertain in two patients. In the latter two cases, IVUS correctly predicted infiltration in one and freedom from tumor in the other case. In our preliminary study, IVUS correctly predicted arterial infiltration in all cases. IVUS did not provide new information when the tumor was far away from the vessel. Compared with IVUS in the portal vein, the information about the artery is more detailed, and the vessel approach is easier. These results encouraged us to design a prospective study to evaluate the sensitivity and specificity of this method.

  15. Solar Feasibility Study May 2013 - San Carlos Apache Tribe

    SciTech Connect

    Rapp, Jim; Duncan, Ken; Albert, Steve

    2013-05-01

    The San Carlos Apache Tribe (Tribe) in the interests of strengthening tribal sovereignty, becoming more energy self-sufficient, and providing improved services and economic opportunities to tribal members and San Carlos Apache Reservation (Reservation) residents and businesses, has explored a variety of options for renewable energy development. The development of renewable energy technologies and generation is consistent with the Tribe’s 2011 Strategic Plan. This Study assessed the possibilities for both commercial-scale and community-scale solar development within the southwestern portions of the Reservation around the communities of San Carlos, Peridot, and Cutter, and in the southeastern Reservation around the community of Bylas. Based on the lack of any commercial-scale electric power transmission between the Reservation and the regional transmission grid, Phase 2 of this Study greatly expanded consideration of community-scale options. Three smaller sites (Point of Pines, Dudleyville/Winkleman, and Seneca Lake) were also evaluated for community-scale solar potential. Three building complexes were identified within the Reservation where the development of site-specific facility-scale solar power would be the most beneficial and cost-effective: Apache Gold Casino/Resort, Tribal College/Skill Center, and the Dudleyville (Winkleman) Casino.

  16. Feasibility study of ultrafast reflectometry for plasma position control

    NASA Astrophysics Data System (ADS)

    de Masi, Gianluca; Cavazzana, Roberto; Finotti, Claudio; Martines, Emilio; Marchiori, Giuseppe; Moresco, Maurizio

    2015-11-01

    The traditional and widely used O-mode microwave reflectometry diagnostics will be crucial for real-time plasma position control purposes in the next generation of tokamaks like ITER or DEMO. Different studies and experimental tests, demonstrated the reliability of such a system to complement and replace the magnetic measurements in order to estimate the plasma-wall gap with good temporal and spatial resolution. In RFX-mod, an innovative multiband reflectometry scheme, the ultrafast reflectometry technique, has been developed and successfully tested. This simplified scheme is based on a bidirectional frequency modulation (sweep time <1 μs) for each band and proved itself to be able to recover the position of the different cut-off density layers directly from the group delay analysis. In this contribution, we study the possibility of using this scheme for real-time plasma position control: we discuss both the reliability of correctly identifying the separatrix position starting from a discrete density profile reconstruction and the robustness of the measurements against fast dynamic events. This work has been carried out within the framework of the EUROfusion Consortium. The views and opinions expressed herein do not necessarily reflect those of the European Commission.

  17. Opto-acoustic image fusion technology for diagnostic breast imaging in a feasibility study

    NASA Astrophysics Data System (ADS)

    Zalev, Jason; Clingman, Bryan; Herzog, Don; Miller, Tom; Ulissey, Michael; Stavros, A. T.; Oraevsky, Alexander; Lavin, Philip; Kist, Kenneth; Dornbluth, N. C.; Otto, Pamela

    2015-03-01

    Functional opto-acoustic (OA) imaging was fused with gray-scale ultrasound acquired using a specialized duplex handheld probe. Feasibility Study findings indicated the potential to more accurately characterize breast masses for cancer than conventional diagnostic ultrasound (CDU). The Feasibility Study included OA imagery of 74 breast masses that were collected using the investigational Imagio® breast imaging system. Superior specificity and equal sensitivity to CDU was demonstrated, suggesting that OA fusion imaging may potentially obviate the need for negative biopsies without missing cancers in a certain percentage of breast masses. Preliminary results from a 100 subject Pilot Study are also discussed. A larger Pivotal Study (n=2,097 subjects) is underway to confirm the Feasibility Study and Pilot Study findings.

  18. A hingeless rotor XV-15 design integration feasibility study. Volume 1: Engineering design studies

    NASA Technical Reports Server (NTRS)

    Magee, J. P.; Alexander, H. R.

    1978-01-01

    A design integration feasibility study was carried out to investigate what modifications to the basic XV-15 were necessary to accomplish a flight demonstration of the XV-15 with a Boeing hingeless rotor. Also investigated were additional modifications which would exploit the full capability provided by the combination of the new rotor and the existing T53 engine. An evaluation of the aircraft is presented and the data indicate improved air vehicle performance, acceptable aeroelastic margins, lower noise levels and improved flying qualities compared with the XV-15 aircraft. Inspection of the rotor system data provided shows an essentially unlimited life rotor for the flight spectrum anticipated for the XV-15.

  19. Feasibility study of solar energy in residential electricity generation

    NASA Astrophysics Data System (ADS)

    Solanki, Divyangsinh G.

    With the increasing demand for energy and the concerns about the global environment, along with the steady progress in the field of renewable energy technologies, new opportunities and possibilities are opening up for an efficient utilization of renewable energy sources. Solar energy is undoubtedly the most clean, inexhaustible and abundant source of renewable energy. Photovoltaic (PV) technology is one of the most efficient mean to utilize solar power. The focus of this study was to establish economics of a residential photovoltaic system for a typical home in south Texas. The PV system serves the needs of a typical mid-size home inhibited by a typical family. Assumptions are made for the typical daily energy consumption, and the necessary equipments like solar arrays, batteries, inverter, etc. are sized and evaluated optimally so as to reduce the life cycle cost (LCC) of the system. Calculations are done taking into consideration the economic parameters concerned with the system.

  20. Real-time measurement of mental workload: A feasibility study

    NASA Technical Reports Server (NTRS)

    Kramer, Arthur; Humphrey, Darryl; Sirevaag, Erik; Mecklinger, Axel

    1990-01-01

    The primary goal of the study was to explore the utility of event-related brain potentials (ERP) as real-time measures of workload. To this end, subjects performed two different tasks both separately and together. One task required that subjects monitor a bank of constantly changing gauges and detect critical deviations. Difficulty was varied by changing the predictability of the gauges. The second task was mental arithmetic. Difficulty was varied by requiring subjects to perform operations on either two or three columns of numbers. Two conditions that could easily be distinguished on the basis of performance measures were selected for the real-time evaluation of ERPs. A bootstrapping approach was adopted in which one thousand samples of n trials (n = 1, 3, 5 ...65) were classified using several measures of P300 and Slow Wave amplitude. Classification accuracies of 85 percent were achieved with 25 trials. Results are discussed in terms of potential enhancements for real-time recording.

  1. Interstitial photodynamic therapy for the prostate: a canine feasibility study

    NASA Astrophysics Data System (ADS)

    Shetty, Sugandh D.; Sirls, Larry T.; Chen, Qun; Hetzel, Fred W.; Cerny, Joseph C.

    1996-05-01

    Prior to a possible clinical application of photodynamic therapy (PDT) for prostatic diseases such as benign prostatic hyperplasia and prostate cancer, optical properties of the prostate gland need to be studied. The specific objectives of this study were (1) to determine the light penetration depth, (2) to document the photosensitizer levels in the prostate, and (3) to document the lesion size after PDT. Sixteen dogs were injected with Photofrin II (1, 3 and 5 mg/kg) 24 hrs prior to laser application. After laparotomy and exposure of prostate, monochromatic light (630 nm, via an argon pumped dye laser) was applied through an isotropic fiber at 100 mw for a total dose of 400 joules. Continuous light fluence and temperature were documented. Prostates were harvested at 1 week and examined histologically for the lesion size. Four sham dogs were treated without Photofrin II. At Photofrin doses of 1, 3 and 5 mg/kg the mean prostatic Photofrin levels were 1.78 plus or minus 0.33, 1.47 plus or minus 0.08 and 1.95 plus or minus 0.44 (mu) gm/ml. The mean light penetration depths were 2.08, 1.37 and 1.64 mm respectively. Photofrin dose escalation (1, 3 and 5 mg/kg) increased the lesion size to radius of 4.1 plus or minus 0.9 mm, 4.4 plus or minus 0.8 mm and 6.3 plus or minus 0.9 mm. There were no lesions seen in sham dogs. These results demonstrate that light penetration in prostate is consistent and therapeutic levels of photosensitizer are achieved in prostatic tissue. Moreover, increasing size of the lesions were documented with dose escalation.

  2. Compensation for respiratory motion in cardiac PET - A feasibility study

    SciTech Connect

    Budinger, T.F.; Klein, G.J.; Reed, J.H. |

    1996-05-01

    We characterize respiration-induced motion in the canine myocardium and present preliminary efforts to compensate for the motion in gated PET. An anesthetized dog was injected with 23 mCi FDG-18 and placed in a CTI/Siemens ECAT EXACT HR scanner. The animal was mechanically held at peak inspiration and peak expiration positions for alternate eight-second time periods. Data from each eight-second interval were stored separately, resulting in a total of 32 interleaved volume datasets for each study; half of which represented data during peak inspiration, half represented data during peak expiration. Data from each position were summed and separately reconstructed. The above protocol was repeated four times. Ungated transmission data were acquired while the animal was ventilated normally and were used to correct for the effects of attenuation. Images from each reconstruction were aligned using a cross-correlation technique, which gives the rigid-body transformation necessary to register the two volumes. Over the four sets of data a 10.8 {plus_minus} 0.7 mm magnitude translation and a 6.3 {plus_minus} 0.5 degree rotation were required to align the inspiration data with the expiration data. Consistent registration of the gated data allows summing of the data to improve statistics. Obviously, if one sums the images without regard to misregistration, blurring occurs proportional to the amount of movement over the respiratory cycle. The blurring is markedly decreased by first registering the gated datasets in image space, and then summing according to the transformation parameters. Though cardiac gating was not used in this preliminary study, it indicates that rigid body transformation followed by summation can compensate for a large portion of the image degradations due to respiratory motion. Gated acquisition of PET data using respiratory status signals via a pneumatic bellows will allow separate stages of the respiratory cycle to be collected on the ECAT EXACT HR.

  3. Feasibility study of three-dimensional holographic interferometry for aerodynamics

    NASA Technical Reports Server (NTRS)

    Craig, J. E.

    1983-01-01

    Laser holographic interferometry was tried as a nonintrusive diagnostic tool for studying unsteady two dimensional flows. A NACA 0012 airfoil was tested, while undergoing dynamic stall, over a range of Mach numbers of 0.3 to 0.5, Reynolds number of 0.5 x 10 to the 6th power to 2 x 10 to the 6th power, and at reduced frequencies of 0.015 to 0.15. It was found that both quantitative and qualitative data could be obtained by the technique. Surface pressures on the airfoil can be measured to within 1% of those measured with orifices and pressure transducers when the flow is attached. Velocity profiles were measured near the wake region, and they compared very well with laser velocimeter data for attached flows. For separated flows with large scale vortices, densities can be measured, but pressures and velocities cannot be deduced with the assumption of constant pressure gradient in the normal direction. The sensitivity of the interferograms was good at a Mach number of 0.4 and a Reynolds number of 4 x 10 to the 6th power/ft; the sensitivity worsened at smaller Mach numbers and Reynolds numbers, and improved at larger ones.

  4. Feasibility Study of a Hand Guided Robotic Drill for Cochleostomy

    PubMed Central

    Brett, Peter; Zoka-Assadi, Masoud; Reid, Andrew; Proops, David

    2014-01-01

    The concept of a hand guided robotic drill has been inspired by an automated, arm supported robotic drill recently applied in clinical practice to produce cochleostomies without penetrating the endosteum ready for inserting cochlear electrodes. The smart tactile sensing scheme within the drill enables precise control of the state of interaction between tissues and tools in real-time. This paper reports development studies of the hand guided robotic drill where the same consistent outcomes, augmentation of surgeon control and skill, and similar reduction of induced disturbances on the hearing organ are achieved. The device operates with differing presentation of tissues resulting from variation in anatomy and demonstrates the ability to control or avoid penetration of tissue layers as required and to respond to intended rather than involuntary motion of the surgeon operator. The advantage of hand guided over an arm supported system is that it offers flexibility in adjusting the drilling trajectory. This can be important to initiate cutting on a hard convex tissue surface without slipping and then to proceed on the desired trajectory after cutting has commenced. The results for trials on phantoms show that drill unit compliance is an important factor in the design. PMID:25110684

  5. Feasibility study on introduction of petroleum substituting energy for transportation

    NASA Astrophysics Data System (ADS)

    1992-03-01

    Concerning electric cars, methanol cars, and CNG (Compressed Natural Gas) cars, the status of development of each of them is studied, grasps the problems on their wide spread through hearings to users, and makes an estimate of the number of cars which is the target for the spread for the time being on the condition that their performance is on the present level. The development of more efficient electric batteries and motors is anticipated for electric cars. Methanol cars have a problem on traveling performance that travel distance by one battery charge is not more than about (1/2) of the existing cars, as well as technical problems such as the development of diesel type use engines, durability of parts, etc. CNG cars have a problem on travel distance by one battery charge which is not more than about (1/3) of the existing cars and a problem on the space caused by carrying the fuel bomb. The target number of fuel substitution cars for the spread is estimated at 833,000 cars, 14% of all the cars in Japan. As of 1991, the number of fuel substitution cars introduced is about 1,200 cars only. In order to lessen the gap, it is indispensable to prepare the infrastructure, improve performance and reliability of the cars, and reduce the cost.

  6. The Neptune/Triton Explorer Mission: A Concept Feasibility Study

    NASA Technical Reports Server (NTRS)

    Esper, Jaime

    2003-01-01

    Technological advances over the next 10 to 15 years promise to enable a number of smaller, more capable science missions to the outer planets. With the inception of miniaturized spacecraft for a wide range of applications, both in large clusters around Earth, and for deep space missions, NASA is currently in the process of redefining the way science is being gathered. Technologies such as 3-Dimensional Multi-Chip Modules, Micro-machined Electromechanical Devices, Multi Functional Structures, miniaturized transponders, miniaturized propulsion systems, variable emissivity thermal coatings, and artificial intelligence systems are currently in research and development, and are scheduled to fly (or have flown) in a number of missions. This study will leverage on these and other technologies in the design of a lightweight Neptune orbiter unlike any other that has been proposed to date. The Neptune/Triton Explorer (NExTEP) spacecraft uses solar electric earth gravity assist and aero capture maneuvers to achieve its intended target orbit. Either a Taurus or Delta-class launch vehicle may be used to accomplish the mission.

  7. Audit in general practice by a receptionist: a feasibility study.

    PubMed Central

    Essex, B; Bate, J

    1991-01-01

    OBJECTIVE--To examine whether audit can be done cost effectively by a practice's receptionist. DESIGN--The practice set goals for various aspects of care, and forms were devised for the receptionist to collect, analyse, and present data to assess whether these goals had been achieved in the previous year. SETTING--Six doctor practice in south London looking after 11,500 patients. MAIN OUTCOME MEASURES--Ability of receptionist to present data showing the level of attainment of the practice's goals; time spent on audit by receptionist each week. RESULTS--The practice set goals for immunisation; follow up of patients with abnormal cervical smears; frequency of recording of blood pressure and smoking habit; screening of patients over 75; care of diabetic patients and patients with serious mental illness; antenatal care; variations in workload; and availability of appointments. The receptionist was able to audit all these tasks in four hours a week; this increased her job satisfaction and extended her skills. A small amount of regular supervision was necessary--roughly 30 minutes a week in the first year of the study and 30 minutes a fortnight in the second--to ensure accuracy and deal with any difficulties that arose. CONCLUSION--The method developed enabled a receptionist to audit aspects of the practice cost effectively. There is great scope for enlarging the conventional role of the receptionist. PMID:1902382

  8. Feasibility study of effect of ultrasound on water chestnuts.

    PubMed

    Wu, Junru; Wu, Meiyin

    2006-04-01

    Water chestnut (Trapa natans L.), an annual aquatic plant with floating leaves was first introduced into North America in 1874. Since then, wild populations have quickly become established in many locations within Northeastern USA. Due to its detrimental effects on the overall health of aquatic ecosystems, millions of dollars have been spent to control the water chestnut infestations in the North America through mechanical harvesting and manual removal, with limited success. The potential for continued expansion of the infestations demonstrates an urgent need for an effective control method. This study examined the potential of ultrasound application as an alternative control strategy for water chestnut management. Various frequencies and amplitudes of ultrasound generated by submerged transducers were applied directly to water chestnuts harvested from Lake Champlain. Substantial damages on water chestnut cells as well as penetrated petitoles were observed at the following tested frequencies of ultrasound, 20 kHz, 187 kHz, 469 kHz, 519 kHz and 2.34 MHz. Among them, 20 kHz ultrasound of 1.9 MPa acoustic pressure amplitude demonstrated the most significant damages within 10 s of ultrasound exposure. The treated plants started to die within 72 h and the mortality rate of water chestnut plants treated with the ultrasound application was 100%.

  9. Study on feasible applications of stirling cycle machine

    NASA Astrophysics Data System (ADS)

    1990-03-01

    The feasibily study of a stirling cycle machine was made on its application to air conditioners and refrigerating machines as well as on the utilization of various heat sources such as LNG cryogenic heat, solar energy, and that of incinerator waste heat. Its application to the air conditioners was technically verified already by the development research which has been made by New Energy and Industrial Technology Development Organization. Its application research on the field of the refrigerating machines is promoted, but it is considered that the machines will also play an important role in promoting the latest leading techniques such as superconductivity. LNG cryogenic power generation is the new field which has been technically developed first in Japan in the world in which country a large quantity of LNG is consumed, and the high efficiency utilization of the stirling cycle machines in this field is expected to be realized in future. It is a important problem to establish the technical basis of a solar energy stirling cycle machine, and they are promoting to develop this machine for practical use not only in Japan but also in many countries in the world. Further, the technical development of the stirling cycle machines utilizing heat sources such as waste heat, geothermal heat, and woody fuel, is also laid on an important situation.

  10. Mahreb power-plant-project assessment of TOR for feasibility study. Export trade information

    SciTech Connect

    Schmidt, A.D.; Ahimaz, F.J.

    1992-01-01

    The study endorses the proposed terms of reference for the feasibility study of the Mahreb Power Generation Project in Yemen. It is a reasonable and practical approach to meet the immediate need for additional power in the country. The outline for the feasibility study also seeks a long term solution for an economic and technically sound power generating system to meet future power needs. U.S. firms have been competitive in international tenders for supplying the type of services and equipment needed for the Mahreb Power Project. Because it is a gas turbine power generation project and the opportunities it offers US equipment manufacturers and contractors, the study recommends that the U.S. Trade and Development Program (TDP) fund the feasibility study.

  11. Adapting a Driving Simulator to Study Pedestrians' Street-Crossing Decisions: A Feasibility Study.

    PubMed

    Jäger, M; Nyffeler, T; Müri, R; Mosimann, U P; Nef, T

    2015-01-01

    The decision when to cross a street safely is a challenging task that poses high demands on perception and cognition. Both can be affected by normal aging, neurodegenerative disorder, and brain injury, and there is an increasing interest in studying street-crossing decisions. In this article, we describe how driving simulators can be modified to study pedestrians' street-crossing decisions. The driving simulator's projection system and the virtual driving environment were used to present street-crossing scenarios to the participants. New sensors were added to measure when the test person starts to cross the street. Outcome measures were feasibility, usability, task performance, and visual exploration behavior, and were measured in 15 younger persons, 15 older persons, and 5 post-stroke patients. The experiments showed that the test is feasible and usable, and the selected difficulty level was appropriate. Significant differences in the number of crashes between young participants and patients (p = .001) as well as between healthy older participants and patients (p = .003) were found. When the approaching vehicle's speed is high, significant differences between younger and older participants were found as well (p = .038). Overall, the new test setup was well accepted, and we demonstrated that driving simulators can be used to study pedestrians' street-crossing decisions.

  12. Plasma system of the GOL-3T facility

    SciTech Connect

    Arzhannikov, A. V.; Burdakov, A. V.; Burmasov, V. S.; Ivanov, I. A.; Kuznetsov, S. A.; Kuklin, K. N.; Mekler, K. I.; Polosatkin, S. V.; Postupaev, V. V. Rovenskikh, A. F.; Sinitsky, S. L.; Sklyarov, V. F.

    2015-11-15

    The plasma system and diagnostics of the new facility GOL-3T are described. This facility is the final result of the first stage in the deep upgrade of the GOL-3 multiple-mirror system, which has operated at the Budker Institute of Nuclear Physics since 1988. The upgrade project supposes creation of two new independent facilities at the site of GOL-3. The GOL-3T facility is intended to study the physics of beam—plasma interaction and generation of subterahertz electromagnetic radiation during the collective relaxation of a high-power relativistic electron beam with a duration of 5–10 μs. Studies on the physics of multiple-mirror plasma confinement in axisymmetric magnetic systems will be continued in a new range of experiment parameters at the second facility, named GOL-NB.

  13. FEASIBILITY STUDY OF CLIMATE CHANGE IMPACTS ON NITROGEN IN CAPE COD EMBAYMENTS

    EPA Science Inventory

    The objective of this study is to explore the feasibility of studying potential effects of climate change on impairments resulting from nitrogen loadings in the salt water embayments of Cape Cod. The report includes a recommended plan for studying these impacts, an estimate of t...

  14. Developing Metacognitive and Discursive Activities in the Indonesian Mathematics Education. Results of a Feasibility Study

    ERIC Educational Resources Information Center

    Kaune, Christa; Cohors-Fresenborg, Elmar; Nowinska, Edyta; Marpaung, Yansen; Handayani, Novi

    2012-01-01

    This article reports on the findings of a German-Indonesian feasibility study, which has been conducted to examine whether a more extensive pilot study could be successful. The objective of the pilot study is to enhance the mathematical skills of Indonesian students in the 7th class by increasing the number of students who can really understand…

  15. Feasibility study to conduct windblown sediment experiments aboard a space station

    NASA Technical Reports Server (NTRS)

    Greeley, R.; Iversen, J. D.

    1983-01-01

    A feasibility study was undertaken to determine if a suitable apparatus could be designed to analyze aeolian processes for operation in space and to assess the feasibility of conducting meaningful experiments to address key aspects of aeolian processes. To meet this objective a prototype apparatus was fabricated and some limited experiments were run to determine its suitability for this application. At least three general types of experiments were devised that could be carried out aboard a space station: threshold studies, swirl (dust devil) experiments, and analyses of windblown particle trajectories. How experiments in a zero-g environment could advance knowledge of aeolian processes was studied.

  16. Evaluation for coastal reclamation feasibility using a comprehensive hydrodynamic framework: A case study in Haizhou Bay.

    PubMed

    Feng, Lan; He, Jia; Ai, Junyong; Sun, Xiang; Bian, Fangyuan; Zhu, Xiaodong

    2015-11-15

    Coastal reclamation (CR) is a prevailing approach to solve the contradiction between the land shortage and the growing demand of living space for human beings. In general, environmental impact assessment (EIA) focuses on evaluating the feasibility of individual coastal reclamation project (CRP). However, few studies have investigated the cumulative effect of multiple CRPs on surrounding environment. In this study, an integrated framework based on coastal hydrodynamics was established, and then applied to the feasibility evaluation of multiple CRPs for future coastal management in Haizhou Bay, China. The results indicated that three out of five reclamation projects were feasible and the remaining two were forbidden in the study area, whereas EIA approves of all the CRPs. It provides a scientific reference for effective management of coastal reclamation and future environmental impact researches when new CRPs are proposed.

  17. A feasibility study of wearable activity monitors for pre-adolescent school-age children

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Understanding physical activity is the key to fighting childhood obesity. The objective of this study was to examine the feasibility of using certian wearable devices to measure physical activity among children. A qualitative study was conducted with 25 children aged 7 to 10 yearsto assess acceptabi...

  18. A feasibility study of wearable activity monitors for pre-adolescent school-aged children

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Understanding physical activity is key in the fight against childhood obesity. The objective of this study was to examine the feasibility of using certain wearable devices to measure physical activity among children. A qualitative study was conducted with 25 children aged 7 to 10 years to assess ac...

  19. The Imports of Overseas Publications and School Ranking in Higher Education: A Feasibility Study

    ERIC Educational Resources Information Center

    Jin, Jang C.

    2016-01-01

    This study examines the feasibility of publication imports that may significantly change school rankings in higher education. A small offshore branch campus is used as a case study. The results show that a higher ranking of the offshore campus is largely due to visiting faculties from its parent university in the United States. This implies that…

  20. MODAS. Feasibility Study for Implementation of V-TECS Occupational Data Analysis System (ODAS).

    ERIC Educational Resources Information Center

    Illinois State Occupational Information Coordinating Committee, Springfield.

    This feasibility study was conducted to determine if the Michigan Occupational Data Analysis System (MODAS) can be implemented or modified in Illinois by studying the information needs of state agencies and local educational institutions. Agencies were asked how they might use the MODAS system for activities such as curriculum development and…

  1. A Patient Learning Center for an Army MEDDAC - A Feasibility Study. Final Report.

    ERIC Educational Resources Information Center

    Kucha, Deloros H.

    A feasibility study was conducted to examine in detail, analyze, and describe the development and operation (system effectiveness and efficiency) of a patient learning center in a MEDDAC, and to provide such information to the Surgeon General for use in planning future health care delivery to military-care eligible beneficiaries. Study objectives…

  2. Assessing neuropsychological performance in a migrant farm working Colonia in Baja California, Mexico: a feasibility study.

    PubMed

    Bousman, Chad A; Salgado, Hugo; Hendrix, Terence; Fraga, Miguel; Cherner, Mariana

    2011-08-01

    Neuropsychological impairments (NPI) can lead to difficulties in daily functioning and ultimately contribute to poor health outcomes. However, evidence for the feasibility of NPI assessment in resource-limited settings using tests developed in high literacy/high education cultures is sparse. The main objectives were to: (1) determine the feasibility and appropriateness of conducting neuropsychological assessments among a migrant farm worker population in Baja California, Mexico and (2) preliminary describe neuropsychological test performance in this unique population. A neuropsychological test battery was administered to 21 presumably healthy adults (8 men, 13 women) during a two-day international health services and research collaboration. All but one neuropsychological test (i.e. figure learning) was feasible and appropriate to administer to the study population. Contrary to expectations, participants performed better on verbal rather than nonverbal neuropsychological tests. Results support inclusion of neuropsychological tests into future studies among migrant farm worker populations in Baja California, Mexico.

  3. Landfill reclamation feasibility study for the Montauk Landfill, town of East Hampton, New York. Final report

    SciTech Connect

    1998-01-01

    A landfill reclamation feasibility study was performed at Montauk Landfill in East Hampton, Long Island, New York. The purpose of the study was to determine whether landfill reclamation is a technically and economically feasible alternative to conventional landfill closure via capping. The technical feasibility of landfill reclamation at the site was determined from a field investigation in which the waste from different periods in the landfill`s history was characterized, the percent of reusable and recyclable materials determined, environmental hazards assessed, and throughput rates determined. Potential markets and/or uses for reclaimed materials were identified and estimates for the re-disposal of the residual waste were obtained from waste-to-energy facilities and offsite landfills.

  4. NMR structure of d(CGCA3T3GCG)2:tren-microgonotropen-b:Zn(II) complex and solution studies of metal ion complexes of tren-microgonotropen-b interacting with DNA.

    PubMed

    Blaskó, A; Browne, K A; Bruice, T C

    1995-06-01

    The solution structure of a 1:1 complex of zinc tren-microgonotropen-b [6b:Zn(II)] with d(CGCAAATTTGCG)2 has been determined by 2D nuclear Overhauser effect 1H NMR spectroscopy and restrained molecular modeling. The exchangeable and nonexchangeable proton resonances of d(CGCA3T3GCG)2:6b:Zn(II) indicate that the Zn(II) is interacting in the A+T-rich region of the dsDNA and the tren region of 6b, while 31P NMR shows interaction of the Zn(II) with the phosphate backbone. Proton chemical shift differences between d(CGCA3T3GCG)2:6b:Zn(II) and d(CGCA3T3GCG)2:6b are in agreement with the polyamino substituent of 6b [-(CH2)4N(CH2CH2)N-(CH2CH2NH2)2] forming a four-coordinated Zn(II) complex similar to that found in the X-ray structure of 'tren-chloride':Zn(II). The P9 and P10 phosphate oxygens that are held by hydrogen bonding to the tren substituent of 6b in the DNA:6b complex become ligands to the tren-complexed Zn(II) in DNA:6b:Zn(II). To do so there is a 2 A decrease in the adjacent phosphate-to-phosphate distance at the Zn(II) binding site. This motion brings about an increased bend of 14.6 degrees in the helical axis of d(CGCA3T3GCG)2:6b:Zn(II) compared to that found in d(CGCA3T3GCG)2:6b. Single stranded cleavage of linear DNA fragments was not observed in the presence of 6b and Fe(II), Co(II), Ni(II), Cu(II), Zn(II), La(III) or Ce(III); this is likely due to the metal ion being sequestered as in the structure of d(CGCA3T3GCG)2:6b:Zn(II) complex. Supercoiled DNA was susceptible to cleavage by 6b:Cu(II) in the presence of O2 and a reducing agent.

  5. Conducting Real-Time Videofluoroscopic Swallow Study via Telepractice: A Preliminary Feasibility and Reliability Study.

    PubMed

    Burns, Clare L; Ward, Elizabeth C; Hill, Anne J; Phillips, Nick; Porter, Linda

    2016-06-01

    A small number of studies have examined the feasibility of conducting videofluoroscopic swallow studies (VFSS) via telepractice. While the results have confirmed this potential, the systems tested to date have either reported issues that impacted the ability to analyze/interpret the VFSS recordings in real time, or they were not designed to enable real-time interpretation. Further system design is needed to establish a telepractice model that enables the VFSS assessment to be both guided and interpreted live in real time. The aim of this study was to test the feasibility and reliability of using a telepractice system to enable live VFSS assessment. Twenty adult patients underwent a VFSS assessment directed by a telepractice SLP with competency in VFSS located in another room of the hospital. The telepractice clinician led the sessions using a C20 Cisco TelePresence System. This was linked in real time via a secure telehealth network (at 4 megabits per second (Mbit/s)) to a C60 Cisco TelePresence System located in a fluoroscopy suite, connected to the digital fluoroscopy system. Levels of agreement were calculated between the telepractice clinician and a face-to-face clinician who simultaneously rated the VFSS in real time. High levels of agreement for swallowing parameters (range = 75-100 %; k = -0.34 to 1.0) and management decisions (range = 70-100 %, k = 0.64-1.0) were found. A post-session questionnaire revealed clinicians agreed that the telepractice system enabled successful remote assessment of VFSS. The findings support the potential to conduct live VFSS assessment via a telepractice model.

  6. Connecting the person with dementia and family: a feasibility study of a telepresence robot

    PubMed Central

    2014-01-01

    Background Maintenance of communication is important for people with dementia living in long-term care. The purpose of this study was to assess the feasibility of using “Giraff”, a telepresence robot to enhance engagement between family and a person with dementia living in long-term care. Methods A mixed-methods approach involving semi-structured interviews, call records and video observational data was used. Five people with dementia and their family member participated in a discussion via the Giraff robot for a minimum of six times over a six-week period. A feasibility framework was used to assess feasibility and included video analysis of emotional response and engagement. Results Twenty-six calls with an average duration of 23 mins took place. Residents showed a general state of positive emotions across the calls with a high level of engagement and a minimal level of negative emotions. Participants enjoyed the experience and families reported that the Giraff robot offered the opportunity to reduce social isolation. A number of software and hardware challenges were encountered. Conclusions Participants perceived this novel approach to engage families and people with dementia as a feasible option. Participants were observed and also reported to enjoy the experience. The technical challenges identified have been improved in a newer version of the robot. Future research should include a feasibility trial of longer duration, with a larger sample and a cost analysis. PMID:24456417

  7. The feasibility and acceptability of conducting a trial of specialist medical care and the Lightning Process in children with chronic fatigue syndrome: feasibility randomized controlled trial (SMILE study)

    PubMed Central

    2013-01-01

    Background Chronic fatigue syndrome (CFS) or myalgic encephalomyelitis (ME) is relatively common in children with limited evidence for treatment. The Phil Parker Lightning Process (LP) is a trademarked intervention, which >250 children use annually. There are no reported studies investigating the effectiveness or possible side effects of LP. Methods The trial population was drawn from the Bath and Bristol NHS specialist paediatric CFS or ME service. The study was designed as a pilot randomized trial with children (aged 12 to 18 years) comparing specialist medical care with specialist medical care plus the Lightning Process. Integrated qualitative methodology was used to explore the feasibility and acceptability of the recruitment, randomization and interventions. Results A total of 56 children were recruited from 156 eligible children (1 October 2010 to 16 June 2012). Recruitment, randomization and both interventions were feasible and acceptable. Participants suggested changes to improve feasibility and acceptability and we incorporated the following in the trial protocol: stopped collecting 6-week outcomes; introduced a second reminder letter; used phone calls to collect primary outcomes from nonresponders; informed participants about different approaches of each intervention and changed our recommendation for the primary outcome for the full study from school attendance to disability (SF-36 physical function subscale) and fatigue (Chalder Fatigue Scale). Conclusions Conducting randomized controlled trials (RCTs) to investigate an alternative treatment such as LP is feasible and acceptable for children with CFS or ME. Feasibility studies that incorporate qualitative methodology enable changes to be made to trial protocols to improve acceptability to participants. This is likely to improve recruitment rate and trial retention. Trial registration Feasibility study first randomization: 29 September 2010. Trial registration: Current Controlled Trials ISRCTN81456207

  8. Lysophosphatidic acid receptor-5 negatively regulates cellular responses in mouse fibroblast 3T3 cells

    SciTech Connect

    Dong, Yan; Hirane, Miku; Araki, Mutsumi; Fukushima, Nobuyuki; Tsujiuchi, Toshifumi

    2014-04-04

    Highlights: • LPA{sub 5} inhibits the cell growth and motile activities of 3T3 cells. • LPA{sub 5} suppresses the cell motile activities stimulated by hydrogen peroxide in 3T3 cells. • Enhancement of LPA{sub 5} on the cell motile activities inhibited by LPA{sub 1} in 3T3 cells. • The expression and activation of Mmp-9 were inhibited by LPA{sub 5} in 3T3 cells. • LPA signaling via LPA{sub 5} acts as a negative regulator of cellular responses in 3T3 cells. - Abstract: Lysophosphatidic acid (LPA) signaling via G protein-coupled LPA receptors (LPA{sub 1}–LPA{sub 6}) mediates a variety of biological functions, including cell migration. Recently, we have reported that LPA{sub 1} inhibited the cell motile activities of mouse fibroblast 3T3 cells. In the present study, to evaluate a role of LPA{sub 5} in cellular responses, Lpar5 knockdown (3T3-L5) cells were generated from 3T3 cells. In cell proliferation assays, LPA markedly stimulated the cell proliferation activities of 3T3-L5 cells, compared with control cells. In cell motility assays with Cell Culture Inserts, the cell motile activities of 3T3-L5 cells were significantly higher than those of control cells. The activity levels of matrix metalloproteinases (MMPs) were measured by gelatin zymography. 3T3-L5 cells stimulated the activation of Mmp-2, correlating with the expression levels of Mmp-2 gene. Moreover, to assess the co-effects of LPA{sub 1} and LPA{sub 5} on cell motile activities, Lpar5 knockdown (3T3a1-L5) cells were also established from Lpar1 over-expressing (3T3a1) cells. 3T3a1-L5 cells increased the cell motile activities of 3T3a1 cells, while the cell motile activities of 3T3a1 cells were significantly lower than those of control cells. These results suggest that LPA{sub 5} may act as a negative regulator of cellular responses in mouse fibroblast 3T3 cells, similar to the case for LPA{sub 1}.

  9. Feasibility studies of colorless LR 115 SSNTD for alpha-particle radiobiological experiments

    NASA Astrophysics Data System (ADS)

    Chan, K. F.; Tse, A. K. W.; Fong, W. F.; Yu, K. N.

    2006-06-01

    The feasibility of using the active layer of the colorless LR 115 SSNTD for alpha-particle radiobiological experiments was studied. The track revelation time on the bottom side (the side attached to the polyester base) was much longer than that on the top side (the side not attached to the polyester base) of the active layer so track formation on the top side was more desirable. In relation to this, culture of HeLa cells on the bottom side of the active layer was found feasible although the cultured cell number was relatively smaller. The feasibility of using this SSNTD for alpha-particle radiobiological experiments was demonstrated by culturing cells on the bottom side while performing alpha-particle irradiation and chemical etching on the top side, and by taking photographs of the cells and alpha-particle tracks together under the optical microscope.

  10. Is clarithromycin a potential treatment for cachexia in people with lung cancer? A feasibility study.

    PubMed

    Awan, Sarah; Crosby, Vincent; Potter, Vanessa; Hennig, Ivo; Baldwin, David; Ndlovu, Mehluli; Paradine, Sharon; Wilcock, Andrew

    2017-02-01

    Clarithromycin may improve cachexia and survival in non-small cell lung cancer (NSCLC), but adequately controlled data are lacking. This study was undertaken primarily to inform the feasibility and scale of a phase III trial. Eligible consenting patients with stage IV NSCLC and cachexia were to be randomized to receive either clarithromycin 250mg twice daily or placebo for eight weeks. Aspects of trial feasibility recorded included numbers eligible, approached and recruited, together with adherence and completion of treatment and assessments. Over 6 months, none of 125 patients identified fulfilled the entry criteria. The commonest reasons for ineligibility were the use of an excluded concurrent drug (45, 36%), brain metastases (22, 18%), poor performance status (21, 17%) and current chemotherapy (15, 12%). A phase III trial of clarithromycin using these entry criteria is not feasible in this setting. Other macrolides that have a lower risk of a drug-drug interaction may be more practical to pursue.

  11. Geothermal Direct Use Feasibility Study on the Fort Bidwell Indian Reservation

    SciTech Connect

    Dale Merrick

    2007-04-20

    The Fort Bidwell Indian Reservation (FBIR) is rich in renewable energy resources. Development of its geothermal resources has the potential to profoundly affect the energy and economic future of the FBIC. Geothermal energy can contribute to making the reservation energy self-sufficient and, potentially, an energy exporter. The feasibility study assessed the feasibility of installing a geothermal district heating system to provide low-cost, efficient heating of existing and planned residences, community buildings and water, using an existing geothermal well, FB-3.

  12. A Feasibility Study of Synthesizing Subsurfaces Modeled with Computational Neural Networks

    NASA Technical Reports Server (NTRS)

    Wang, John T.; Housner, Jerrold M.; Szewczyk, Z. Peter

    1998-01-01

    This paper investigates the feasibility of synthesizing substructures modeled with computational neural networks. Substructures are modeled individually with computational neural networks and the response of the assembled structure is predicted by synthesizing the neural networks. A superposition approach is applied to synthesize models for statically determinate substructures while an interface displacement collocation approach is used to synthesize statically indeterminate substructure models. Beam and plate substructures along with components of a complicated Next Generation Space Telescope (NGST) model are used in this feasibility study. In this paper, the limitations and difficulties of synthesizing substructures modeled with neural networks are also discussed.

  13. Feasibility studies for the Sonic Sensor System for noninvasive temperature measurement in the food processing industry

    SciTech Connect

    Beller, L.S.; Mikesell, C.R.; Taylor, S.C.; Tow, D.M.

    1991-09-01

    Feasibility studies for development of the Sonic Sensor System to measure temperature in the interior of particulates during food processing are described. The method involves tomography-based acquisition and interpretation of speed of sound data. The method is found to be feasible, and representative engineering problems and other technical issues are identified. A two-step approach to concept commercialization, involving replacement of the present puncture-and-thermometer method is conventional batch processing and development of a device to use in continuous aseptic processing, is proposed. A conservative estimate of immediate energy savings, just for food processing, is 0.01 quad/y. Potential follow-on applications are discussed.

  14. 40 CFR 300.430 - Remedial investigation/feasibility study and selection of remedy.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 28 2011-07-01 2011-07-01 false Remedial investigation/feasibility study and selection of remedy. 300.430 Section 300.430 Protection of Environment ENVIRONMENTAL... human health and the environment. Remedial actions are to be implemented as soon as site data...

  15. 40 CFR 300.430 - Remedial investigation/feasibility study and selection of remedy.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 29 2012-07-01 2012-07-01 false Remedial investigation/feasibility study and selection of remedy. 300.430 Section 300.430 Protection of Environment ENVIRONMENTAL... human health and the environment. Remedial actions are to be implemented as soon as site data...

  16. A Feasibility Study for a University in Bangladesh under Catholic Sponsorship

    ERIC Educational Resources Information Center

    Rodrigues, Harold Bijoy

    2009-01-01

    This research explores the feasibility for a university in Bangladesh under Catholic sponsorship. The study is designed to help the leaders of the Catholic community make an informed decision for its future educational ministry. The findings indicate that the Catholic community is enthusiastic about it, feels the need for it, but may not have the…

  17. Feasibility Study of Health Effect in Pinellas area. Progress report, September 1, 1992--August 31, 1993

    SciTech Connect

    Not Available

    1993-05-31

    This report describes the progress and the plan of activities in the Feasibility Study of Health Effect in populations residing near the Pinellas Plant. The period covered by the work progress is September 1, 1992 through April 30, 1993 and the period covered by the plan of the project activities is May 1 through August 31, 1993.

  18. 77 FR 74668 - Compliance Policy Guide; Radiofrequency Identification Feasibility Studies and Pilot Programs for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-12-17

    ... HUMAN SERVICES Food and Drug Administration Compliance Policy Guide; Radiofrequency Identification Feasibility Studies and Pilot Programs for Drugs; Notice To Extend Expiration Date AGENCY: Food and Drug Administration, HHS. ACTION: Notice; extension of expiration date. SUMMARY: The Food and Drug Administration...

  19. 77 FR 13343 - Pilot Program for Early Feasibility Study Investigational Device Exemption Applications...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-06

    ... HUMAN SERVICES Food and Drug Administration Pilot Program for Early Feasibility Study Investigational... Program AGENCY: Food and Drug Administration, HHS. ACTION: Notice. SUMMARY: The Food and Drug... submission of nominations from sponsors of innovative device technologies to participate in a pilot...

  20. A Feasibility Study for a Physician's Assistant Program. Occupational Education Research Project. Final Report.

    ERIC Educational Resources Information Center

    Minette, William P.

    This study was conducted to design an educational program for physician's assistant that would conform to the American Medical Association's essential requirements for the occupation and to determine the feasibility of establishing such a program at Pitt Technical Institute in North Carolina. The investigation covered selection procedures,…